initial commit

examples/hameter.yaml

@@ -0,0 +1,59 @@
+# HAMeter configuration
+# Mount this file into the container at /config/hameter.yaml
+
+general:
+  # 0 = continuous (recommended for always-on server)
+  sleep_for: 0
+  # RTL-SDR device index (0 = first/only device)
+  device_id: "0"
+  # rtl_tcp listens inside the container (don't change unless using remote SDR)
+  rtl_tcp_host: "127.0.0.1"
+  rtl_tcp_port: 1234
+  # DEBUG, INFO, WARNING, ERROR
+  log_level: INFO
+
+mqtt:
+  # Unraid server IP (where Mosquitto runs)
+  host: "192.168.1.74"
+  port: 1883
+  user: ""
+  password: ""
+  base_topic: "hameter"
+  ha_autodiscovery: true
+  ha_autodiscovery_topic: "homeassistant"
+  client_id: "hameter"
+
+meters:
+  # Electric Meter — Itron Centron C1SR
+  # ERT Radio Serial: 23040293 (NOT the billing number 2698881)
+  - id: 23040293
+    protocol: scm
+    name: "Electric Meter"
+    unit_of_measurement: "kWh"
+    icon: "mdi:flash"
+    device_class: energy
+    state_class: total_increasing
+    # Calibration: physical_meter_reading / raw_scm_value
+    # From PoC: 59669 / 516030 ≈ 0.1156
+    # TODO: take a simultaneous reading to confirm this multiplier
+    multiplier: 0.1156
+
+  # Gas Meter — uncomment after running --discover to find the ID
+  # - id: REPLACE_WITH_GAS_METER_ID
+  #   protocol: scm
+  #   name: "Gas Meter"
+  #   unit_of_measurement: "ft³"
+  #   icon: "mdi:fire"
+  #   device_class: gas
+  #   state_class: total_increasing
+  #   multiplier: 1.0
+
+  # Water Meter — likely Neptune R900 protocol
+  # - id: REPLACE_WITH_WATER_METER_ID
+  #   protocol: r900
+  #   name: "Water Meter"
+  #   unit_of_measurement: "gal"
+  #   icon: "mdi:water"
+  #   device_class: water
+  #   state_class: total_increasing
+  #   multiplier: 1.0