ckochandClaude Fable 5
891c4c46da
Build Bazzite BC-250 / Check Bazzite channel digests (push) Has been cancelled
Build Bazzite BC-250 / Build Custom Image (push) Has been cancelled
Build Bazzite BC-250 / Build Custom 40CU Image (push) Has been cancelled
Build Bazzite BC-250 / Save Bazzite channel digest cache (push) Has been cancelled
Build Bazzite BC-250 / Publish GitHub Release (push) Has been cancelled
Bazzite base already covers the rest (max_map_count, zram, gamemode, tuned profiles); governor stock curve (1000-1850 MHz, 85C throttle) left as-is — ceiling tuning is documented in OPERATIONS.md for after on-hardware thermal testing. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
77 lines
3.4 KiB
Markdown
77 lines
3.4 KiB
Markdown
# BC-250 Console — Parent's Operations Manual
|
||
|
||
A copy of this file lives on the console at
|
||
`/usr/share/doc/bc250-console/OPERATIONS.md`.
|
||
|
||
Accounts: **kid** (plays games, no admin) and **parent** (admin, sudo).
|
||
Both ship with password `bc250console` — **change both immediately**:
|
||
log in (or SSH) as each user and run `passwd`. Parent can also reset the
|
||
kid's password any time: `sudo passwd kid`.
|
||
|
||
## Connecting remotely
|
||
|
||
| | Command / client | Works when |
|
||
|---|---|---|
|
||
| SSH (terminal) | `ssh parent@<console-address>` | Always (console is never asleep) |
|
||
| RDP (see the screen) | Any RDP client → `<console-address>:3389` | Only while the kid's session is logged in |
|
||
|
||
`<console-address>`: the LAN IP, or (recommended) the Tailscale name/IP so it
|
||
works from anywhere. Never port-forward 22/3389 on the router.
|
||
|
||
## One-time setup after installing
|
||
|
||
1. On the console, log in as **kid**, open a terminal, run `bc250-remote-setup`
|
||
(sets up RDP credentials + firewall; SSH is already on).
|
||
2. `sudo tailscale up` — log in with your Tailscale account (daemon already runs).
|
||
3. In Steam (opens automatically in Big Picture): log into the kid's Steam
|
||
account, enable **Family View** (Settings → Family) and set the PIN.
|
||
4. Change both passwords (see above).
|
||
|
||
## Installing a game remotely
|
||
|
||
RDP into the kid's session → unlock Family View with your PIN → Steam →
|
||
Store → install. Downloads continue after you disconnect.
|
||
|
||
## Updates
|
||
|
||
- **Automatic**: the console updates the OS image, flatpaks, and Steam on its
|
||
own (`uupd` timer, runs in the background). Nothing to do.
|
||
- **Force an update now** (SSH): `sudo bootc upgrade && flatpak update -y`
|
||
- **What version am I on?**: `sudo bootc status` (shows image + digest)
|
||
- **Publishing a new OS image** (on the build PC): see
|
||
`BUILD-CONSOLE.md` → "Publish an update". The console picks it up
|
||
automatically within a day, or immediately with `sudo bootc upgrade`.
|
||
- **Roll back a bad update**: hold Space at boot and pick the previous entry,
|
||
or over SSH: `sudo bootc rollback && sudo systemctl reboot`.
|
||
|
||
## Health checks (SSH)
|
||
|
||
```bash
|
||
sensors # temps — watch under load
|
||
systemctl status cyan-skillfish-governor-smu # GPU governor: should be active
|
||
cat /sys/class/drm/card*/device/pp_dpm_sclk # GPU clock scaling
|
||
df -h / # disk space
|
||
```
|
||
|
||
## Tuning the GPU (optional, after thermal testing)
|
||
|
||
The GPU governor's curve lives at
|
||
`/etc/cyan-skillfish-governor-smu/config.toml`. Stock range is
|
||
**1000–1850 MHz**, thermal throttle at 85 °C — a good default. If temps stay
|
||
comfortably low during long sessions you can raise `max` under
|
||
`[frequency-range]` (safe-points up to 2000 MHz are pre-defined; higher ones
|
||
are in the file, commented out). Running hot or loud? Lower `max` to ~1500.
|
||
After editing: `sudo systemctl restart cyan-skillfish-governor-smu`.
|
||
There is also `cyan-skillfish-performance-mode` for temporarily pinning
|
||
high clocks. Change one thing at a time and re-check `sensors`.
|
||
|
||
## Misc
|
||
|
||
- Reboot: `sudo systemctl reboot` — Shutdown: `sudo systemctl poweroff`
|
||
- The console never sleeps or locks by design (it must stay reachable).
|
||
- Kid's session opens Steam Big Picture automatically; Esc exits to desktop.
|
||
- RDP refuses to connect → the kid's session probably isn't logged in, or
|
||
`bc250-remote-setup` hasn't been run yet.
|
||
- Steam misbehaves after an update → try ProtonUp-Qt (installed) to switch
|
||
the game to Proton-GE.
|