ckochandClaude Opus 5.5
1400cc8afd
- KiCad project generated by pcb/tools (design, route, schematic, fab outputs). - v0.4 fixes the v0.3 review findings: low-dropout 3.3 V regulator, OR'd 5 V supply, polyfuse, USB ESD protection, input clamps, ceramic decoupling at the drivers, A4988/DRV8825 jumper, ground stitching. DRC/ERC clean. - v0.3 (as ordered) kept in pcb/archive/v0.3. - FluidNC config.yaml for the board; rho hard limit on. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
19 lines
1.8 KiB
Plaintext
19 lines
1.8 KiB
Plaintext
(fp_lib_table
|
|
(version 7)
|
|
(lib (name "Button_Switch_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Button_Switch_SMD.pretty")(options "")(descr ""))
|
|
(lib (name "Capacitor_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Capacitor_SMD.pretty")(options "")(descr ""))
|
|
(lib (name "Connector_BarrelJack")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_BarrelJack.pretty")(options "")(descr ""))
|
|
(lib (name "Connector_JST")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_JST.pretty")(options "")(descr ""))
|
|
(lib (name "Connector_PinHeader_2.54mm")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_PinHeader_2.54mm.pretty")(options "")(descr ""))
|
|
(lib (name "Connector_USB")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_USB.pretty")(options "")(descr ""))
|
|
(lib (name "Converter_DCDC")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Converter_DCDC.pretty")(options "")(descr ""))
|
|
(lib (name "Diode_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Diode_SMD.pretty")(options "")(descr ""))
|
|
(lib (name "LED_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/LED_SMD.pretty")(options "")(descr ""))
|
|
(lib (name "Module")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Module.pretty")(options "")(descr ""))
|
|
(lib (name "MountingHole")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/MountingHole.pretty")(options "")(descr ""))
|
|
(lib (name "Package_SO")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Package_SO.pretty")(options "")(descr ""))
|
|
(lib (name "Package_TO_SOT_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Package_TO_SOT_SMD.pretty")(options "")(descr ""))
|
|
(lib (name "RF_Module")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/RF_Module.pretty")(options "")(descr ""))
|
|
(lib (name "Resistor_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Resistor_SMD.pretty")(options "")(descr ""))
|
|
)
|