31/32/33 each hold one piece, so "-x4"/"-x16" read as if the files held 4 and
16 copies. Renamed to -print-4 / -print-16 and rebuilt the Bambu Studio
projects. The MakerWorld upload package lives in publish/ (copies, not in git).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
print/3mf/sand-table-v3-P1S.3mf: every part oriented for printing, PLA case
parts and PETG moving parts, supports only on the arm motor bracket, stronger
walls on the hub, carriage and brackets, solid counterweight. Slices on all
9 plates: about 23.5 h, 760 g PLA + 165 g PETG.
print/3mf/sand-table-v3-P1S-options.3mf: 12.5 mm sand ring, M2 switch mount.
print/tools/make_3mf.py builds both from the STLs with the Bambu Studio
command line (flattened system presets, fixed-up per-filament settings).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BUILD.md walks through the whole build: what to buy (parts and screws), the
v3 print list with materials and supports, case, electronics (microstep
jumpers, driver current), centre, the arm on the bench, hub and slip ring,
wiring to the CNC shield, software setup and a first run without sand, then
floor, magnet height, sand and glass, plus troubleshooting.
Also adds the 608 fit test to print/v3 so the v3 folder is complete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- print/ reorganised: v1-original (first export), v2-current, the v2.1-v2.7 fixes
found while building, and v3/ with every printed part.
- v3: deck screws you can reach, seam joints from outside, arm bolted straight
to the hub, 6804 hub bearings with a 15 mm bore for connectors, clamp collar,
counterweight, 12.5 mm sand ring for a raised floor, Uno turnaround plate.
- print/README.md: full v3 parts list, what changed and why, assembly order.
- docs/: diagrams for each change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ckochandClaude Opus 5.5