Point local work folders at ~/Documents/projects/sandTable-local

The KiCad working copy and the Pi image work dir moved out of ~/kicad and
~/Documents into ~/Documents/projects/sandTable-local.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

pcb/tools/fab.py

@@ -1,7 +1,7 @@
 """Build the PCBWay order files and copy the KiCad project + outputs into the repo.
 
-Run after route.py and sch.py. Writes to ~/kicad/sandtable-controller/fab (the KiCad snap can't
-read inside ~/snap), then copies the results to ../ (the repo's pcb/ folder).
+Run after route.py and sch.py. Writes to ~/Documents/projects/sandTable-local/sandtable-controller/fab (outside
+the repo), then copies the results to ../ (the repo's pcb/ folder).
 """
 import csv
 import glob
@@ -14,7 +14,7 @@ import zipfile
 sys.path.insert(0, os.path.dirname(__file__))
 import design as D
 
-WORK = os.path.expanduser('~/kicad/sandtable-controller')
+WORK = os.path.expanduser('~/Documents/projects/sandTable-local/sandtable-controller')
 NAME = 'sandtable-controller'
 PCB = os.path.join(WORK, NAME + '.kicad_pcb')
 SCH = os.path.join(WORK, NAME + '.kicad_sch')

pcb/tools/place_check.py

@@ -6,7 +6,7 @@ sys.path.insert(0, os.path.dirname(__file__))
 import design as D
 from board import build, check_placement, write_pcb, write_project, keepout_zone
 
-OUT = os.path.expanduser('~/kicad/sandtable-controller')
+OUT = os.path.expanduser('~/Documents/projects/sandTable-local/sandtable-controller')
 
 parts = build()
 probs = check_placement(parts)

pcb/tools/route.py

@@ -9,7 +9,7 @@ import design as D
 from board import build, check_placement, write_pcb, write_project, keepout_zone, text_node
 import router as R
 
-OUT = os.path.expanduser('~/kicad/sandtable-controller')
+OUT = os.path.expanduser('~/Documents/projects/sandTable-local/sandtable-controller')
 
 # routing width per net
 WIDTH = {}

pcb/tools/sch.py

@@ -9,7 +9,7 @@ from board import uid, fmt
 from kilib import load_symbol, sym_pins
 from sexpr import QStr, dumps, find, findall
 
-OUT = os.path.expanduser('~/kicad/sandtable-controller')
+OUT = os.path.expanduser('~/Documents/projects/sandTable-local/sandtable-controller')
 NAME = 'sandtable-controller'
 ROOT = uid('rootsheet')
 STUB = 2.54