Sand table v3: build fixes, bolted hub, counterweight, print guide

Browse Source

- print/ reorganised: v1-original (first export), v2-current, the v2.1-v2.7 fixes
  found while building, and v3/ with every printed part.
- v3: deck screws you can reach, seam joints from outside, arm bolted straight
  to the hub, 6804 hub bearings with a 15 mm bore for connectors, clamp collar,
  counterweight, 12.5 mm sand ring for a raised floor, Uno turnaround plate.
- print/README.md: full v3 parts list, what changed and why, assembly order.
- docs/: diagrams for each change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

...

This commit is contained in:

ckochandClaude Opus 5.5 committed 2026-11-01 13:40:23 -05:00

1 parent 370cb1c79c

commit c498882bbb

123 files changed

+580 -41

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

print/v3/00b-fit-test-6804.stl

BIN

Binary file not shown.

print/v3/01-shell-Q1-cable-notch.stl

BIN

Binary file not shown.

print/v3/02-shell-Q2.stl

BIN

Binary file not shown.

print/v3/03-shell-Q3.stl

BIN

Binary file not shown.

print/v3/04-shell-Q4.stl

BIN

Binary file not shown.

print/v3/05-deck-Q1-arduino.stl

BIN

Binary file not shown.

print/v3/06-deck-Q2.stl

BIN

Binary file not shown.

print/v3/07-deck-Q3.stl

BIN

Binary file not shown.

print/v3/08-deck-Q4.stl

BIN

Binary file not shown.

print/v3/09-center-plate.stl

BIN

Binary file not shown.

print/v3/10-hub-80T-pulley-bolted.stl

BIN

Binary file not shown.

print/v3/11-hub-clamp-collar.stl

BIN

Binary file not shown.

print/v3/13-arm-motor-bracket-SUPPORTS-tall-window.stl

BIN

Binary file not shown.

print/v3/14-switch-mount-M2.stl

BIN

Binary file not shown.

print/v3/14-switch-mount-pegs.stl

BIN

Binary file not shown.

print/v3/15-idler-bracket.stl

BIN

Binary file not shown.

print/v3/16-idler-sleeve-wide.stl

BIN

Binary file not shown.

print/v3/17-carriage.stl

BIN

Binary file not shown.

print/v3/18-magnet-cup-short.stl

BIN

Binary file not shown.

print/v3/19-roller-washers-x4.stl

BIN

Binary file not shown.

print/v3/19b-idler-washer.stl

BIN

Binary file not shown.

print/v3/20-magnet-spacers-1-2-3mm.stl

BIN

Binary file not shown.

print/v3/21-sand-ring-Q1-12.5mm.stl

BIN

Binary file not shown.

print/v3/21-sand-ring-Q1.stl

BIN

Binary file not shown.

print/v3/22-sand-ring-Q2-12.5mm.stl

BIN

Binary file not shown.

print/v3/22-sand-ring-Q2.stl

BIN

Binary file not shown.

print/v3/23-sand-ring-Q3-12.5mm.stl

BIN

Binary file not shown.

print/v3/23-sand-ring-Q3.stl

BIN

Binary file not shown.

print/v3/24-sand-ring-Q4-12.5mm.stl

BIN

Binary file not shown.

print/v3/24-sand-ring-Q4.stl

BIN

Binary file not shown.

print/v3/25-carriage-striker.stl

BIN

Binary file not shown.

print/v3/26-slip-ring-coupler.stl

BIN

Binary file not shown.

print/v3/27-slip-ring-holder.stl

BIN

Binary file not shown.

print/v3/30-motor-bracket-shim.stl

BIN

Binary file not shown.

print/v3/31-seam-plate-low-x4.stl

BIN

Binary file not shown.

print/v3/32-seam-plate-high-x4.stl

BIN

Binary file not shown.

print/v3/33-seam-plug-x16.stl

BIN

Binary file not shown.

print/v3/34-counterweight.stl

BIN

Binary file not shown.

print/v3/35-counterweight-lid.stl

BIN

Binary file not shown.

print/v3/36-uno-turnaround-plate.stl

BIN

Binary file not shown.