diff --git a/pcb/README.md b/pcb/README.md new file mode 100644 index 0000000..e72fd52 --- /dev/null +++ b/pcb/README.md @@ -0,0 +1,115 @@ +# SandTable Controller v0.4 (custom PCB) + +![render](renders/render-iso.png) + +A 2-layer, 80 × 63 mm board that replaces the Arduino Uno + CNC shield in the sand table. It uses the **same 4 mounting holes as an Uno**, so it fits the deck standoffs. + +**Status:** v0.4 is designed and checked in KiCad, with order files ready for PCBWay. It has not been built yet. v0.3 boards have been ordered; their files are kept in [`archive/v0.3/`](archive/v0.3/), and "Using a v0.3 board" below lists what to watch for on them. + +- **MCU:** ESP32-WROOM-32E (Wi-Fi), running FluidNC. USB-C programming through a CH340C with auto-reset, so no buttons need pressing. ESD protection on the USB data lines. +- **Motors:** 2× DRV8825 StepStick sockets, each with a 100 µF bulk capacitor plus a 10 µF ceramic right at its power pins. The board fixes the drivers at 1/32 microstepping and keeps them awake: M0–M2, RESET and SLEEP are all tied to 3.3 V. A4988 drivers also fit (at 1/16) after bridging solder jumper JP1. +- **Power:** 12 V barrel jack → 2.5 A resettable fuse → reverse-polarity diode → RECOM R-78E 5 V 1 A switching regulator → AP7361C 3.3 V low-dropout regulator. USB 5 V and regulator 5 V are diode-ORed, so USB alone powers the logic for flashing. The motors need the 12 V supply. +- **Connectors:** JST-XH to match the motor cable plugs: + - 2× motor (pin order matches the Arduino CNC shield: each coil on an adjacent pair) + - home switch + - hall sensor (5 V supply) + - WS2812B LED data (buffered to 5 V) + - 4-pin expansion header +- **Inputs:** the home and hall inputs have a pull-up to 3.3 V, an RC filter and a clamp diode to 3.3 V, so a 5 V sensor or module can't overdrive the ESP32. +- **Copper:** ground pour on both layers, stitched with about 350 vias. The ESP32 antenna sits over a copper-free area at the board edge. + +## Changes in v0.4 +From a design review of v0.3. None of these stop a v0.3 board from working; they add margin and make the board safe for other people's parts. + +| Area | v0.3 | v0.4 | +|---|---|---| +| 3.3 V regulator | AMS1117: needs about 4.4 V in, but only gets about 4.5 V after the OR diode, so the rail could sag during Wi-Fi bursts | AP7361C-33E: 0.09 V dropout at 300 mA, stable with ceramic capacitors. **Different pinout** (1 IN, 2 GND/tab, 3 OUT); never swap in a 1117-type part | +| 5 V regulator | R-78E5.0-0.5 (0.5 A): not enough for the ESP32 plus an LED strip | R-78E5.0-1.0 (1 A, same footprint). The OR diode D2 is now a 3 A SS34 | +| Driver supply | 100 µF capacitors 19 mm from the VMOT pins | Plus a 10 µF 50 V ceramic across VMOT and GND at each socket (C16, C17). They sit between the socket strips, under the module | +| Driver pin 2 (FAULT on DRV8825, VDD on A4988) | Tied to 3.3 V: safe only on modules with a series resistor on FAULT | Solder jumper JP1, open by default. Bridge it only for A4988 modules | +| Home / hall inputs | A 5 V sensor module with its own pull-up could push about 4 V into IO34 / IO35 | BAT54 clamp diodes to 3.3 V (D6, D7), after the 1 k series resistors | +| 12 V input | No fuse | Bourns MF-MSMF250/16X-2 resettable fuse (2.5 A hold, 5 A trip) | +| USB | No ESD protection | USBLC6-2SC6 on D+ / D− | +| Motor traces | One at 0.3 mm, the rest 0.5 mm | All 0.5 mm (about 1.5 A each); the router may not narrow motor or 12 V traces | +| Ground | 29 ground vias, 3–4 under the ESP32 | About 350 stitching vias, about 100 under the ESP32 | +| Motor plug pin order | Coil pairs on pins 1–2 and 3–4 | Same pairs, in the driver's own order (as on the CNC shield). An axis may now turn the other way than on v0.3: see "Firmware" below | + +## Checks (KiCad 9.0.7, `kicad-cli`) + +| Check | Result | +|---|---| +| ERC (schematic) | 0 violations | +| DRC (board, all severities) against PCBWay's standard limits: 6/6 mil trace/space, 0.3 mm hole, 0.15 mm ring | 0 violations, 0 unconnected | +| Schematic ↔ PCB parity | 0 differences | +| Vias within 0.2 mm of a pad, holes inside a pad (checked from the board file) | 0 | +| Pinouts of every active part checked against its datasheet or KiCad's library symbol | ESP32, CH340C, AP7361C, 74AHCT1G125, R-78E, USBLC6, MMBT3904, USB-C, driver sockets | +| Fit in the sand table (v3 shell and deck) | Board corners 3 mm from the wall, clear of the deck bosses; jack and USB next to the cable notch | + +## Ordering from PCBWay +Everything for the order is in [`pcbway-order/`](pcbway-order/). [`ORDER.md`](pcbway-order/ORDER.md) there lists the exact settings to enter, which file goes in which upload box, and a note to paste for PCBWay. + +| File | What | +|---|---| +| `1-gerbers-…zip` | Board files: Gerbers plus separate plated and non-plated drill files | +| `2-bom-…csv` | Parts list for turnkey assembly, with manufacturer part numbers | +| `3-centroid-…csv` | Part positions in mm, origin at the board's bottom-left corner | +| `assembly-top-…pdf`, `schematic-…pdf` | For PCBWay's engineers if they ask | + +The DRV8825 modules are not on the order; you plug in your own. The back of the board has PCBWay's "WayWayWay" marker, so their order number prints there instead of on the front. + +## Before first power-up +1. **Driver type.** DRV8825: leave JP1 (under the theta driver socket, marked "A4988 ONLY") open. A4988: bridge JP1 with a blob of solder, or the A4988 has no logic supply. +2. **Driver direction.** Line up the module's VMOT, EN and DIR pins with the VMOT / EN / DIR labels on the board. A driver plugged in backwards is destroyed. +3. **Driver current.** On a DRV8825, current limit = 2 × Vref (with the usual 0.1 Ω sense resistors). + - Start at about 70 % of the motor's rated current. For example, a 1.0 A motor needs Vref ≈ 0.35 V. + - Measure Vref between the trim pot and GND with the 12 V supply connected. + - Never plug or unplug a motor while the power is on. +4. **Home switch wiring.** Connect the switch's COM to HOME pin 3 (GND) and its NO contact to pin 2. +5. **Firmware.** + - Flash FluidNC over USB with the FluidNC web installer. + - Upload `fluidnc/config.yaml` as `config.yaml`. + - In the config, X is theta in degrees and Y is rho in mm. `$H` homes rho. + - If an axis turns the wrong way, add `:low` to its direction pin. + +## Using a v0.3 board +The v0.3 boards work; the v0.4 changes add margin. On a v0.3 board: +- **Random resets or Wi-Fi dropouts**, mostly on USB power alone: the AMS1117 is short of headroom. Run from the 12 V supply, or replace U3 with a low-dropout regulator that has the **same pinout as an AMS1117** (pin 1 GND, pin 2 OUT and tab, pin 3 IN). ST's LDL1117S33R is sold as one; check its datasheet's pin table before buying. The AP7361C used on v0.4 has a different pinout and does not fit a v0.3 board. +- **DRV8825 clones:** check that the module has a resistor in series with its FAULT pin, as Pololu's does. If not, clip or bend that pin (FAULT, between A2 and the last GND on the motor-pin row) so it doesn't plug in; a DRV8825 doesn't need it. +- **LED strip:** the 5 V regulator gives 0.5 A in total, which leaves room for only 2–3 LEDs at full white. +- **Hall sensor:** use a bare open-collector sensor (A3144 style), not a breakout module with its own pull-up to 5 V. +- **Motor traces:** fine up to about 1.2 A per motor. + +## ESP32 pin map + +| Function | GPIO | +|---|---| +| Theta (spin) STEP / DIR | IO18 / IO19 | +| Rho (arm) STEP / DIR | IO27 / IO14 | +| Driver enable (shared, low = on, pulled up so the drivers are off at boot) | IO13 | +| Rho home switch | IO34 | +| Theta hall sensor | IO35 | +| LED strip data (through a 74AHCT1G125 buffer) | IO33 | +| Status LED | IO2 | +| Expansion header | IO32, IO25 | +| Free, not connected | IO16, IO17 | + +## Files + +| Path | What | +|---|---| +| `kicad/` | KiCad 9 project: schematic, board, and project-local symbol and footprint tables | +| `sandtable-controller-schematic.pdf` | Schematic | +| `pcbway-order/` | Everything to upload to PCBWay, plus `ORDER.md` with the settings | +| `renders/` | 3D renders | +| `sandtable-controller.step` | 3D model | +| `fluidnc/config.yaml` | FluidNC machine config (a starting point, not yet run on hardware) | +| `archive/v0.3/` | The v0.3 board as ordered: KiCad files, order files, schematic and the generator's `design.py` | +| `tools/` | Python generator: `design.py` (parts, placement, nets, sourcing) → `route.py` (router, ground pour, stitching vias, board file), `sch.py` (schematic), `fab.py` (PCBWay order folder, renders, copy into this folder). `place_new.py` finds free spots for parts added in a revision | + +To regenerate everything, run `python3 tools/route.py && python3 tools/sch.py && python3 tools/fab.py`. The KiCad files are built in `~/kicad/sandtable-controller` because the KiCad snap can't read inside `~/snap/`. + +## Notes +- **5 V budget:** the 5 V regulator supplies 1 A. The ESP32 takes up to about 0.4 A during Wi-Fi bursts, which leaves about 0.6 A for an LED strip: roughly 10 WS2812B LEDs at full white, or more at lower brightness. On USB power alone, keep the strip off; USB gives 0.5 A in total. Use a separate 5 V supply for longer strips. +- **Input voltage:** 12 V. The fuse is rated 16 V, so don't use a higher supply. +- **Noise:** DRV8825s are louder than TMC2209s; expect some motor whine. TMC2209 modules in standalone mode might work in these sockets, but their pin layouts vary by brand, so check before trying one. +- **LED strip:** FluidNC doesn't drive the WS2812B header. It's there for other firmware or an add-on later. diff --git a/pcb/archive/v0.3/README.md b/pcb/archive/v0.3/README.md new file mode 100644 index 0000000..abfab2f --- /dev/null +++ b/pcb/archive/v0.3/README.md @@ -0,0 +1,98 @@ +# SandTable Controller v0.3 (custom PCB) + +![render](renders/render-iso.png) + +A 2-layer, 80 × 63 mm board that replaces the Arduino Uno + CNC shield in the sand table. It uses the **same 4 mounting holes as an Uno**, so it fits the deck standoffs. + +**Status: designed and checked in KiCad, with order files ready for PCBWay. It has not been built or tested yet.** + +- **MCU:** ESP32-WROOM-32E (Wi-Fi), running FluidNC. USB-C programming through a CH340C with auto-reset, so no buttons need pressing. +- **Motors:** 2× DRV8825 StepStick sockets, with 100 µF bulk capacitors. The board fixes the drivers at 1/32 microstepping and keeps them awake: M0–M2, RESET and SLEEP are all tied to 3.3 V. A4988 drivers also fit and run at 1/16. +- **Power:** 12 V barrel jack with a reverse-polarity diode → RECOM R-78E 5 V switching regulator → AMS1117 3.3 V. USB 5 V and regulator 5 V are diode-ORed, so USB alone powers the logic for flashing. The motors need the 12 V supply. +- **Connectors:** JST-XH to match the motor cable plugs: + - 2× motor + - home switch + - hall sensor (5 V) + - WS2812B LED data (buffered to 5 V) + - 4-pin expansion header +- **Copper:** ground pour on both layers. The ESP32 antenna sits over a copper-free area at the board edge. + +## Changes in v0.3 +- **No holes in solder pads.** PCBWay's review of v0.2 found vias inside pads, which they would only build reliably by filling them with resin, for extra cost. + - The router now keeps every via at least 0.2 mm from every pad. In v0.2, 26 vias sat in or overlapped pads of small parts. + - The ESP32's 12 ground-pad holes are replaced by one solid copper pad, with the same 9 solder windows. + - PCBWay can now build it as drawn, with no via filling. +- **Parts list:** exact part numbers for the 4-pin header (Sullins PRPC004SAAN-RC), the driver sockets (Sullins PPTC081LFBN-RC) and the 100 µF capacitors (Panasonic EEE-FK1V101GP), as agreed with PCBWay. + +## Changes in v0.2 +- **Drivers:** DRV8825 instead of TMC2209 in UART mode. The serial line and its resistor are removed, so IO16/IO17 are now free. +- **Holes:** the smallest hole is now 0.3 mm. The ESP32 footprint's 0.2 mm ground-pad vias were enlarged, because PCBWay charges extra for holes under 0.3 mm. +- **Order files:** a PCBWay order folder (Gerbers, parts list, placement file, assembly drawing, order sheet) replaces the JLCPCB files. +- **Silkscreen:** VMOT / EN / DIR are printed beside each driver socket. + +## Checks (KiCad 9.0.7, `kicad-cli`) + +| Check | Result | +|---|---| +| ERC (schematic) | 0 violations | +| DRC (board, all severities) against PCBWay's standard limits: 6/6 mil trace/space, 0.3 mm hole, 0.15 mm ring | 0 violations, 0 unconnected | +| Schematic ↔ PCB parity | 0 differences | +| Vias within 0.2 mm of a pad, holes inside a pad (checked from the board file) | 0 | + +## Ordering from PCBWay +Everything for the order is in [`pcbway-order/`](pcbway-order/). [`ORDER.md`](pcbway-order/ORDER.md) there lists the exact settings to enter, which file goes in which upload box, and a note to paste for PCBWay. + +| File | What | +|---|---| +| `1-gerbers-…zip` | Board files: Gerbers plus separate plated and non-plated drill files | +| `2-bom-…csv` | Parts list for turnkey assembly, with manufacturer part numbers | +| `3-centroid-…csv` | Part positions in mm, origin at the board's bottom-left corner | +| `assembly-top-…pdf`, `schematic-…pdf` | For PCBWay's engineers if they ask | + +The DRV8825 modules are not on the order; you plug in your own. The back of the board has PCBWay's "WayWayWay" marker, so their order number prints there instead of on the front. + +## Before first power-up +1. **Driver direction.** Line up the module's VMOT, EN and DIR pins with the VMOT / EN / DIR labels on the board. A driver plugged in backwards is destroyed. +2. **Driver current.** On a DRV8825, current limit = 2 × Vref (with the usual 0.1 Ω sense resistors). + - Start at about 70 % of the motor's rated current. For example, a 1.0 A motor needs Vref ≈ 0.35 V. + - Measure Vref between the trim pot and GND with the 12 V supply connected. + - Never plug or unplug a motor while the power is on. +3. **Home switch wiring.** Connect the switch's COM to HOME pin 3 (GND) and its NO contact to pin 2. +4. **Firmware.** + - Flash FluidNC over USB with the FluidNC web installer. + - Upload `fluidnc/config.yaml` as `config.yaml`. + - In the config, X is theta in degrees and Y is rho in mm. `$H` homes rho. + - If an axis turns the wrong way, add `:low` to its direction pin. + +## ESP32 pin map + +| Function | GPIO | +|---|---| +| Theta (spin) STEP / DIR | IO18 / IO19 | +| Rho (arm) STEP / DIR | IO27 / IO14 | +| Driver enable (shared, low = on, pulled up so the drivers are off at boot) | IO13 | +| Rho home switch | IO34 | +| Theta hall sensor | IO35 | +| LED strip data (through a 74AHCT1G125 buffer) | IO33 | +| Status LED | IO2 | +| Expansion header | IO32, IO25 | +| Free, not connected | IO16, IO17 | + +## Files + +| Path | What | +|---|---| +| `kicad/` | KiCad 9 project: schematic, board, and project-local symbol and footprint tables | +| `sandtable-controller-schematic.pdf` | Schematic | +| `pcbway-order/` | Everything to upload to PCBWay, plus `ORDER.md` with the settings | +| `renders/` | 3D renders | +| `sandtable-controller.step` | 3D model. The copy placed in `sand-table-v2.solidcraft` is v0.1, which has the same outline and holes. | +| `fluidnc/config.yaml` | FluidNC machine config (a starting point, not yet run on hardware) | +| `tools/` | Python generator: `design.py` (parts, placement, nets, sourcing) → `route.py` (router, ground pour, board file), `sch.py` (schematic), `fab.py` (PCBWay order folder, renders, copy into this folder) | + +To regenerate everything, run `python3 tools/route.py && python3 tools/sch.py && python3 tools/fab.py`. The KiCad files are built in `~/kicad/sandtable-controller` because the KiCad snap can't read inside `~/snap/`. + +## Notes +- **5 V budget:** the 5 V regulator supplies 0.5 A. That covers the ESP32 plus a short LED strip (about 10 LEDs at full white). Use a separate 5 V supply for longer strips. +- **Noise:** DRV8825s are louder than TMC2209s; expect some motor whine. TMC2209 modules in standalone mode might work in these sockets, but their pin layouts vary by brand, so check before trying one. +- **LED strip:** FluidNC doesn't drive the WS2812B header. It's there for other firmware or an add-on later. diff --git a/pcb/archive/v0.3/design-v0.3.py b/pcb/archive/v0.3/design-v0.3.py new file mode 100644 index 0000000..127369c --- /dev/null +++ b/pcb/archive/v0.3/design-v0.3.py @@ -0,0 +1,183 @@ +"""SandTable Controller (version in VERSION): single source of truth for parts, placement and nets. + +Board coordinates are mm, y down, origin at the board's top-left corner. +x = 0 is the edge that faces the table wall (power + USB); x = 80 faces the +table centre (motor/sensor connectors). The 4 mounting holes reuse the +Arduino Uno hole pattern so the board drops onto the existing deck standoffs. +""" + +VERSION = '0.3' +BOARD_W = 80.0 +BOARD_H = 63.34 +ORIGIN = (100.0, 100.0) # where board (0,0) lands in KiCad coordinates + +# ---------------------------------------------------------------- parts +# ref: (symbol lib_id, footprint lib_id, value, x, y, rot, lcsc, description) +PARTS = { + 'U1': ('RF_Module:ESP32-WROOM-32E', 'RF_Module:ESP32-WROOM-32E', 'ESP32-WROOM-32E-N8', 43.0, 50.59, 180, '', 'Wi-Fi MCU module (FluidNC)'), + 'U2': ('Interface_USB:CH340C', 'Package_SO:SOIC-16_3.9x9.9mm_P1.27mm', 'CH340C', 22.0, 47.0, 0, 'C84681', 'USB-UART bridge'), + 'U3': ('Regulator_Linear:AMS1117-3.3', 'Package_TO_SOT_SMD:SOT-223-3_TabPin2', 'AMS1117-3.3', 66.0, 41.5, 0, 'C6186', '5V -> 3.3V LDO'), + 'U4': ('74xGxx:74AHCT1G125', 'Package_TO_SOT_SMD:SOT-23-5', '74AHCT1G125', 65.5, 30.0, 0, '', '3.3V -> 5V LED data buffer'), + 'PS1': ('Converter_DCDC:R-785.0-0.5', 'Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT', 'R-78E5.0-0.5', 18.0, 35.0, 0, '', '12V -> 5V switching regulator'), + 'A1': ('Driver_Motor:Pololu_Breakout_A4988', 'Module:Pololu_Breakout-16_15.2x20.3mm', 'DRV8825 StepStick (theta/spin)', 38.1, 1.9, 270, '', 'Stepper driver socket (DRV8825, 1/32 step)'), + 'A2': ('Driver_Motor:Pololu_Breakout_A4988', 'Module:Pololu_Breakout-16_15.2x20.3mm', 'DRV8825 StepStick (rho/arm)', 59.1, 1.9, 270, '', 'Stepper driver socket (DRV8825, 1/32 step)'), + 'J1': ('Connector:Barrel_Jack', 'Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal', '12V DC 5.5x2.1', 12.3, 25.0, 270, '', 'Power input'), + 'J2': ('Connector:USB_C_Receptacle_USB2.0_16P', 'Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12', 'USB-C', 3.4, 44.0, 270, 'C165948', 'Programming / serial'), + 'J3': ('Connector_Generic:Conn_01x04', 'Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical', 'SPIN MOTOR', 4.5, 3.4, 270, 'C158012', 'Theta motor (XH-4, matches motor cable)'), + 'J4': ('Connector_Generic:Conn_01x04', 'Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical', 'ARM MOTOR', 76.5, 3.4, 270, 'C158012', 'Rho motor via slip ring'), + 'J5': ('Connector_Generic:Conn_01x03', 'Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', 'HOME SW', 76.5, 18.5, 270, 'C144394', 'Rho home switch (via slip ring)'), + 'J6': ('Connector_Generic:Conn_01x03', 'Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', 'HALL', 76.5, 29.6, 270, 'C144394', 'Optional theta hall sensor (5V)'), + 'J7': ('Connector_Generic:Conn_01x03', 'Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', 'LED STRIP', 76.5, 40.7, 270, 'C144394', 'WS2812B strip (5V, small strips only)'), + 'J8': ('Connector_Generic:Conn_01x04', 'Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical', 'EXPANSION', 77.5, 52.0, 0, '', '3V3 / IO32 / IO25 / GND'), + 'D1': ('Device:D_Schottky', 'Diode_SMD:D_SMA', 'SS34', 16.0, 22.0, 270, 'C8678', 'Reverse-polarity protection'), + 'D2': ('Device:D_Schottky', 'Diode_SMD:D_SOD-123', 'B5819W', 29.0, 35.0, 0, 'C8598', '5V OR-ing (regulator)'), + 'D3': ('Device:D_Schottky', 'Diode_SMD:D_SOD-123', 'B5819W', 13.0, 39.8, 0, 'C8598', '5V OR-ing (USB)'), + 'D4': ('Device:LED', 'LED_SMD:LED_0603_1608Metric', 'GREEN', 34.0, 30.0, 0, 'C72043', 'Power LED'), + 'D5': ('Device:LED', 'LED_SMD:LED_0603_1608Metric', 'BLUE', 38.0, 30.0, 0, 'C72041', 'Status LED (IO2)'), + 'Q1': ('Transistor_BJT:MMBT3904', 'Package_TO_SOT_SMD:SOT-23', 'MMBT3904', 28.0, 47.2, 0, 'C20526', 'Auto-reset (EN)'), + 'Q2': ('Transistor_BJT:MMBT3904', 'Package_TO_SOT_SMD:SOT-23', 'MMBT3904', 28.0, 51.2, 0, 'C20526', 'Auto-reset (IO0)'), + 'SW1': ('Switch:SW_Push', 'Button_Switch_SMD:SW_SPST_B3U-1000P', 'RESET', 27.5, 55.0, 0, 'C231329', 'EN / reset button'), + 'SW2': ('Switch:SW_Push', 'Button_Switch_SMD:SW_SPST_B3U-1000P', 'BOOT', 22.0, 55.0, 0, 'C231329', 'IO0 / boot button'), + 'C1': ('Device:C_Polarized', 'Capacitor_SMD:CP_Elec_8x10', '100uF 25V', 24.0, 21.0, 0, '', 'Theta driver VMOT bulk'), + 'C2': ('Device:C_Polarized', 'Capacitor_SMD:CP_Elec_8x10', '100uF 25V', 45.5, 21.0, 0, '', 'Rho driver VMOT bulk'), + 'C3': ('Device:C', 'Capacitor_SMD:C_1206_3216Metric', '10uF 25V', 20.5, 39.6, 0, 'C13585', '12V input decoupling'), + 'C4': ('Device:C', 'Capacitor_SMD:C_1206_3216Metric', '10uF 16V', 26.0, 39.6, 0, 'C13585', 'Regulator output'), + 'C5': ('Device:C', 'Capacitor_SMD:C_0805_2012Metric', '10uF', 59.6, 44.0, 90, 'C15850', 'LDO input'), + 'C6': ('Device:C', 'Capacitor_SMD:C_0805_2012Metric', '22uF', 59.6, 39.5, 90, 'C45783', 'LDO output'), + 'C7': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 27.0, 43.0, 90, 'C14663', 'CH340C decoupling'), + 'C8': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '1uF', 54.6, 52.7, 0, 'C15849', 'EN reset delay'), + 'C9': ('Device:C', 'Capacitor_SMD:C_0805_2012Metric', '10uF', 57.5, 54.6, 90, 'C15850', 'ESP32 bulk decoupling'), + 'C10': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 55.0, 55.0, 90, 'C14663', 'ESP32 decoupling'), + 'C13': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 61.0, 18.5, 0, 'C14663', 'Home switch filter'), + 'C14': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 61.0, 20.7, 0, 'C14663', 'Hall filter'), + 'C15': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 61.0, 30.0, 90, 'C14663', 'Buffer decoupling'), + 'R1': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '5.1k', 11.5, 42.75, 0, 'C23186', 'USB-C CC1 pull-down'), + 'R2': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '5.1k', 11.5, 45.75, 0, 'C23186', 'USB-C CC2 pull-down'), + 'R3': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 31.0, 45.0, 90, 'C25804', 'Q1 base'), + 'R4': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 31.0, 49.5, 90, 'C25804', 'Q2 base'), + 'R5': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 54.6, 51.0, 0, 'C25804', 'EN pull-up'), + 'R6': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 31.0, 37.5, 0, 'C25804', 'IO0 pull-up'), + 'R8': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 47.0, 31.0, 0, 'C25804', 'Driver enable pull-up (off at boot)'), + 'R9': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 54.0, 18.5, 0, 'C25804', 'Home switch pull-up'), + 'R10': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '1k', 57.5, 18.5, 0, 'C21190', 'Home switch series'), + 'R11': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 54.0, 20.7, 0, 'C25804', 'Hall pull-up'), + 'R12': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '1k', 57.5, 20.7, 0, 'C21190', 'Hall series'), + 'R13': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '330', 70.0, 30.0, 90, 'C23138', 'LED data series'), + 'R14': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '1k', 34.0, 32.5, 0, 'C21190', 'Power LED'), + 'R15': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '1k', 38.0, 32.5, 0, 'C21190', 'Status LED'), + 'H1': ('Mechanical:MountingHole', 'MountingHole:MountingHole_3.2mm_M3', 'M3', 15.24, 7.54, 0, '', 'Uno hole'), + 'H2': ('Mechanical:MountingHole', 'MountingHole:MountingHole_3.2mm_M3', 'M3', 13.97, 55.8, 0, '', 'Uno hole'), + 'H3': ('Mechanical:MountingHole', 'MountingHole:MountingHole_3.2mm_M3', 'M3', 66.04, 22.78, 0, '', 'Uno hole'), + 'H4': ('Mechanical:MountingHole', 'MountingHole:MountingHole_3.2mm_M3', 'M3', 66.04, 50.72, 0, '', 'Uno hole'), +} + +# ---------------------------------------------------------------- nets +NETS = { + 'GND': ['J1.2', 'J2.A1', 'J2.A12', 'J2.B1', 'J2.B12', 'J2.S1', 'C1.2', 'C2.2', 'C3.2', 'C4.2', 'C5.2', + 'C6.2', 'C7.2', 'C8.2', 'C9.2', 'C10.2', 'C13.2', 'C14.2', 'C15.2', 'PS1.2', 'U3.1', 'U2.1', + 'U1.1', 'U1.15', 'U1.38', 'U1.39', 'A1.1', 'A1.7', 'A2.1', 'A2.7', + 'J5.3', 'J6.3', 'J7.3', 'J8.4', 'SW1.2', 'SW2.2', 'R1.2', 'R2.2', 'D4.1', 'D5.1', 'U4.1', 'U4.3'], + 'VIN_RAW': ['J1.1', 'D1.2'], + '+12V': ['D1.1', 'C1.1', 'C2.1', 'C3.1', 'PS1.1', 'A1.8', 'A2.8'], + '+5V_REG': ['PS1.3', 'C4.1', 'D2.2'], + 'VBUS': ['J2.A4', 'J2.A9', 'J2.B4', 'J2.B9', 'D3.2'], + '+5V': ['D2.1', 'D3.1', 'U3.3', 'C5.1', 'U4.5', 'C15.1', 'J6.1', 'J7.1'], + '+3V3': ['U3.2', 'C6.1', 'U1.2', 'C9.1', 'C10.1', 'U2.16', 'U2.4', 'C7.1', 'R5.1', 'R6.1', 'R8.1', + 'R9.1', 'R11.1', 'R14.1', 'J5.1', 'J8.1', + # DRV8825 sockets: VDD/FAULT, M0-M2 high (1/32 step), RESET + SLEEP high (awake) + 'A1.2', 'A1.10', 'A1.11', 'A1.12', 'A1.13', 'A1.14', + 'A2.2', 'A2.10', 'A2.11', 'A2.12', 'A2.13', 'A2.14'], + 'USB_DP': ['J2.A6', 'J2.B6', 'U2.5'], + 'USB_DM': ['J2.A7', 'J2.B7', 'U2.6'], + 'CC1': ['J2.A5', 'R1.1'], + 'CC2': ['J2.B5', 'R2.1'], + 'U0TXD': ['U1.35', 'U2.3'], + 'U0RXD': ['U1.34', 'U2.2'], + 'DTR': ['U2.13', 'R3.1', 'Q2.2'], + 'RTS': ['U2.14', 'R4.1', 'Q1.2'], + 'Q1B': ['R3.2', 'Q1.1'], + 'Q2B': ['R4.2', 'Q2.1'], + 'EN': ['Q1.3', 'U1.3', 'R5.2', 'C8.1', 'SW1.1'], + 'IO0': ['Q2.3', 'U1.25', 'R6.2', 'SW2.1'], + 'DRV_EN': ['U1.16', 'R8.2', 'A1.9', 'A2.9'], + 'X_STEP': ['U1.30', 'A1.15'], + 'X_DIR': ['U1.31', 'A1.16'], + 'Y_STEP': ['U1.12', 'A2.15'], + 'Y_DIR': ['U1.13', 'A2.16'], + 'X_1A': ['A1.4', 'J3.1'], 'X_1B': ['A1.3', 'J3.2'], 'X_2A': ['A1.5', 'J3.3'], 'X_2B': ['A1.6', 'J3.4'], + 'Y_1A': ['A2.4', 'J4.1'], 'Y_1B': ['A2.3', 'J4.2'], 'Y_2A': ['A2.5', 'J4.3'], 'Y_2B': ['A2.6', 'J4.4'], + 'HOME_RAW': ['J5.2', 'R9.2', 'R10.1'], + 'HOME': ['R10.2', 'C13.1', 'U1.6'], + 'HALL_RAW': ['J6.2', 'R11.2', 'R12.1'], + 'HALL': ['R12.2', 'C14.1', 'U1.7'], + 'LED_DATA': ['U1.9', 'U4.2'], + 'LED_BUF': ['U4.4', 'R13.1'], + 'LED_DOUT': ['R13.2', 'J7.2'], + 'EXP_IO32': ['U1.8', 'J8.2'], + 'EXP_IO25': ['U1.10', 'J8.3'], + 'STAT': ['U1.24', 'R15.1'], + 'STAT_A': ['R15.2', 'D5.2'], + 'PWR_A': ['R14.2', 'D4.2'], +} + +# Pins intentionally left unconnected (get no-connect flags in the schematic) +NO_CONNECT = ['U1.4', 'U1.5', 'U1.14', 'U1.17', 'U1.18', 'U1.19', 'U1.20', 'U1.21', 'U1.22', 'U1.23', + 'U1.11', 'U1.26', 'U1.29', 'U1.32', 'U1.33', 'U1.36', 'U1.37', + 'U2.7', 'U2.8', 'U2.9', 'U2.10', 'U2.11', 'U2.12', 'U2.15', + 'U1.27', 'U1.28', 'J2.A8', 'J2.B8'] + +# ---------------------------------------------------------------- rules +# net class -> (track width, clearance) +NETCLASS = { + 'Default': (0.2, 0.16), + 'Power': (0.8, 0.2), + 'Motor': (0.6, 0.2), + 'Rail': (0.5, 0.2), +} +NET_TO_CLASS = {} +for n in ('GND', 'VIN_RAW', '+12V'): + NET_TO_CLASS[n] = 'Power' +for n in ('X_1A', 'X_1B', 'X_2A', 'X_2B', 'Y_1A', 'Y_1B', 'Y_2A', 'Y_2B'): + NET_TO_CLASS[n] = 'Motor' +for n in ('+5V', '+5V_REG', 'VBUS', '+3V3'): + NET_TO_CLASS[n] = 'Rail' + +VIA = (0.6, 0.3) # diameter, drill + +# PCBWay standard process: 6/6 mil track/space, 0.3 mm min hole, 0.15 mm annular ring. +# Library footprints with smaller holes (the ESP32's thermal vias are 0.2 mm) are enlarged to fit. +MIN_DRILL = 0.3 +MIN_RING = 0.2 + +# ---------------------------------------------------------------- sourcing (PCBWay BOM) +# (refs, manufacturer, manufacturer part number, description, notes). Blank MPN = any brand to the description. +SOURCING = [ + (['U1'], 'Espressif', 'ESP32-WROOM-32E-N8', 'Wi-Fi + Bluetooth module, 8 MB flash, PCB antenna', ''), + (['U2'], 'WCH', 'CH340C', 'USB to UART bridge, SOIC-16', ''), + (['U3'], 'Advanced Monolithic Systems', 'AMS1117-3.3', 'LDO regulator 3.3 V 1 A, SOT-223', 'Any AMS1117-3.3 equivalent ok'), + (['U4'], 'Texas Instruments', 'SN74AHCT1G125DBVR', 'Single buffer, TTL-level input, SOT-23-5', ''), + (['PS1'], 'RECOM', 'R-78E5.0-0.5', 'Switching regulator 5 V 0.5 A, SIP-3', ''), + (['J1'], 'Same Sky (CUI Devices)', 'PJ-063AH', 'DC barrel jack, 2.0 mm pin, fits 5.5 x 2.1 mm plugs', ''), + (['J2'], 'Korean Hroparts Elec', 'TYPE-C-31-M-12', 'USB-C receptacle, USB 2.0, 16 pin', ''), + (['J3', 'J4'], 'JST', 'B4B-XH-A(LF)(SN)', 'XH header, 4 pin, 2.5 mm pitch, vertical', ''), + (['J5', 'J6', 'J7'], 'JST', 'B3B-XH-A(LF)(SN)', 'XH header, 3 pin, 2.5 mm pitch, vertical', ''), + (['J8'], 'Sullins', 'PRPC004SAAN-RC', 'Male pin header 1 x 4, 2.54 mm pitch, vertical', ''), + (['A1', 'A2'], 'Sullins', 'PPTC081LFBN-RC', 'Female pin header 1 x 8, 2.54 mm pitch, 8.5 mm tall', '2 headers per driver (4 total). Sockets only: the DRV8825 modules are supplied by me'), + (['D1'], '', 'SS34', 'Schottky diode 40 V 3 A, SMA', 'Any brand'), + (['D2', 'D3'], '', 'B5819W', 'Schottky diode 40 V 1 A, SOD-123', 'Any brand'), + (['D4'], '', '', 'LED green, 0603', 'Any brand'), + (['D5'], '', '', 'LED blue, 0603', 'Any brand'), + (['Q1', 'Q2'], 'onsemi', 'MMBT3904LT1G', 'NPN transistor 40 V 200 mA, SOT-23', 'Any MMBT3904 ok'), + (['SW1', 'SW2'], 'Omron', 'B3U-1000P', 'Tactile switch, SMD, 3 x 2.5 mm', ''), + (['C1', 'C2'], 'Panasonic', 'EEE-FK1V101GP', 'Aluminium electrolytic capacitor 100 uF 35 V, SMD 8 x 10.2 mm', ''), + (['C3', 'C4'], '', '', 'Ceramic capacitor 10 uF 25 V X5R, 1206', 'Any brand'), + (['C5', 'C9'], '', '', 'Ceramic capacitor 10 uF 16 V X5R, 0805', 'Any brand'), + (['C6'], '', '', 'Ceramic capacitor 22 uF 10 V X5R, 0805', 'Any brand'), + (['C7', 'C10', 'C13', 'C14', 'C15'], '', '', 'Ceramic capacitor 100 nF 50 V X7R, 0603', 'Any brand'), + (['C8'], '', '', 'Ceramic capacitor 1 uF 16 V X7R, 0603', 'Any brand'), + (['R1', 'R2'], '', '', 'Resistor 5.1 k 1%, 0603', 'Any brand'), + (['R3', 'R4', 'R5', 'R6', 'R8', 'R9', 'R11'], '', '', 'Resistor 10 k 1%, 0603', 'Any brand'), + (['R10', 'R12', 'R14', 'R15'], '', '', 'Resistor 1 k 1%, 0603', 'Any brand'), + (['R13'], '', '', 'Resistor 330 1%, 0603', 'Any brand'), +] +SOURCING_QTY = {('A1', 'A2'): 4} # BOM lines whose piece count differs from the designator count diff --git a/pcb/archive/v0.3/kicad/fp-lib-table b/pcb/archive/v0.3/kicad/fp-lib-table new file mode 100644 index 0000000..3d0a60a --- /dev/null +++ b/pcb/archive/v0.3/kicad/fp-lib-table @@ -0,0 +1,18 @@ +(fp_lib_table + (version 7) + (lib (name "Button_Switch_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Button_Switch_SMD.pretty")(options "")(descr "")) + (lib (name "Capacitor_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Capacitor_SMD.pretty")(options "")(descr "")) + (lib (name "Connector_BarrelJack")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_BarrelJack.pretty")(options "")(descr "")) + (lib (name "Connector_JST")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_JST.pretty")(options "")(descr "")) + (lib (name "Connector_PinHeader_2.54mm")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_PinHeader_2.54mm.pretty")(options "")(descr "")) + (lib (name "Connector_USB")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_USB.pretty")(options "")(descr "")) + (lib (name "Converter_DCDC")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Converter_DCDC.pretty")(options "")(descr "")) + (lib (name "Diode_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Diode_SMD.pretty")(options "")(descr "")) + (lib (name "LED_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/LED_SMD.pretty")(options "")(descr "")) + (lib (name "Module")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Module.pretty")(options "")(descr "")) + (lib (name "MountingHole")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/MountingHole.pretty")(options "")(descr "")) + (lib (name "Package_SO")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Package_SO.pretty")(options "")(descr "")) + (lib (name "Package_TO_SOT_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Package_TO_SOT_SMD.pretty")(options "")(descr "")) + (lib (name "RF_Module")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/RF_Module.pretty")(options "")(descr "")) + (lib (name "Resistor_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Resistor_SMD.pretty")(options "")(descr "")) +) diff --git a/pcb/archive/v0.3/kicad/sandtable-controller.kicad_pcb b/pcb/archive/v0.3/kicad/sandtable-controller.kicad_pcb new file mode 100644 index 0000000..6a16d40 --- /dev/null +++ b/pcb/archive/v0.3/kicad/sandtable-controller.kicad_pcb @@ -0,0 +1,27714 @@ +(kicad_pcb + (version 20241229) + (generator "pcbnew") + (generator_version "9.0") + (general + (thickness 1.6) + (legacy_teardrops no) + ) + (paper "A4") + (title_block + (title "SandTable Controller") + (date "2026-10-22") + (rev "0.3") + (company "lazypugs") + (comment 1 "ESP32 + 2x DRV8825 StepStick, drop-in for the Uno bay") + ) + (layers + (0 "F.Cu" signal) + (2 "B.Cu" signal) + (9 "F.Adhes" user "F.Adhesive") + (11 "B.Adhes" user "B.Adhesive") + (13 "F.Paste" user) + (15 "B.Paste" user) + (5 "F.SilkS" user "F.Silkscreen") + (7 "B.SilkS" user "B.Silkscreen") + (1 "F.Mask" user) + (3 "B.Mask" user) + (17 "Dwgs.User" user "User.Drawings") + (19 "Cmts.User" user "User.Comments") + (21 "Eco1.User" user "User.Eco1") + (23 "Eco2.User" user "User.Eco2") + (25 "Edge.Cuts" user) + (27 "Margin" user) + (31 "F.CrtYd" user "F.Courtyard") + (29 "B.CrtYd" user "B.Courtyard") + (35 "F.Fab" user) + (33 "B.Fab" user) + ) + (setup + (pad_to_mask_clearance 0) + (allow_soldermask_bridges_in_footprints no) + (tenting front back) + (aux_axis_origin 100 163.34) + (pcbplotparams + (layerselection 0x00000000_00000000_55555555_5755f5ff) + (plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000) + (disableapertmacros no) + (usegerberextensions no) + (usegerberattributes yes) + (usegerberadvancedattributes yes) + (creategerberjobfile yes) + (svgprecision 4) + (plotframeref no) + (mode 1) + (useauxorigin no) + (outputformat 1) + (mirror no) + (drillshape 1) + (scaleselection 1) + (outputdirectory "") + ) + ) + (net 0 "") + (net 1 "/GND") + (net 2 "/+12V") + (net 3 "/+3V3") + (net 4 "/+5V") + (net 5 "/+5V_REG") + (net 6 "/CC1") + (net 7 "/CC2") + (net 8 "/DRV_EN") + (net 9 "/DTR") + (net 10 "/EN") + (net 11 "/EXP_IO25") + (net 12 "/EXP_IO32") + (net 13 "/HALL") + (net 14 "/HALL_RAW") + (net 15 "/HOME") + (net 16 "/HOME_RAW") + (net 17 "/IO0") + (net 18 "/LED_BUF") + (net 19 "/LED_DATA") + (net 20 "/LED_DOUT") + (net 21 "/PWR_A") + (net 22 "/Q1B") + (net 23 "/Q2B") + (net 24 "/RTS") + (net 25 "/STAT") + (net 26 "/STAT_A") + (net 27 "/U0RXD") + (net 28 "/U0TXD") + (net 29 "/USB_DM") + (net 30 "/USB_DP") + (net 31 "/VBUS") + (net 32 "/VIN_RAW") + (net 33 "/X_1A") + (net 34 "/X_1B") + (net 35 "/X_2A") + (net 36 "/X_2B") + (net 37 "/X_DIR") + (net 38 "/X_STEP") + (net 39 "/Y_1A") + (net 40 "/Y_1B") + (net 41 "/Y_2A") + (net 42 "/Y_2B") + (net 43 "/Y_DIR") + (net 44 "/Y_STEP") + (net 45 "unconnected-(J2-SBU1-PadA8)") + (net 46 "unconnected-(J2-SBU2-PadB8)") + (net 47 "unconnected-(U1-IO12-Pad14)") + (net 48 "unconnected-(U1-IO15-Pad23)") + (net 49 "unconnected-(U1-IO16-Pad27)") + (net 50 "unconnected-(U1-IO17-Pad28)") + (net 51 "unconnected-(U1-IO21-Pad33)") + (net 52 "unconnected-(U1-IO22-Pad36)") + (net 53 "unconnected-(U1-IO23-Pad37)") + (net 54 "unconnected-(U1-IO26-Pad11)") + (net 55 "unconnected-(U1-IO4-Pad26)") + (net 56 "unconnected-(U1-IO5-Pad29)") + (net 57 "unconnected-(U1-NC-Pad17)") + (net 58 "unconnected-(U1-NC-Pad18)") + (net 59 "unconnected-(U1-NC-Pad19)") + (net 60 "unconnected-(U1-NC-Pad20)") + (net 61 "unconnected-(U1-NC-Pad21)") + (net 62 "unconnected-(U1-NC-Pad22)") + (net 63 "unconnected-(U1-NC-Pad32)") + (net 64 "unconnected-(U1-SENSOR_VN-Pad5)") + (net 65 "unconnected-(U1-SENSOR_VP-Pad4)") + (net 66 "unconnected-(U2-NC-Pad7)") + (net 67 "unconnected-(U2-NC-Pad8)") + (net 68 "unconnected-(U2-R232-Pad15)") + (net 69 "unconnected-(U2-~{CTS}-Pad9)") + (net 70 "unconnected-(U2-~{DCD}-Pad12)") + (net 71 "unconnected-(U2-~{DSR}-Pad10)") + (net 72 "unconnected-(U2-~{RI}-Pad11)") + (footprint "Module:Pololu_Breakout-16_15.2x20.3mm" + (layer "F.Cu") + (uuid "4ae593ec-eccb-534f-8aad-1eacbc744a74") + (at 138.1 101.9 270) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8eee2878-e3b1-563e-b354-21ed2a2361c4") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Pololu Breakout 16-pin 15.2x20.3mm 0.6x0.8") + (tags "Pololu Breakout") + (property "Reference" "A1" + (at 6.35 -2.54 0) + (layer "F.SilkS") + (uuid "05ccdf2f-c4f0-4475-bcd9-f1ec554057f0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "DRV8825 StepStick (theta/spin)" + (at 6.35 20.17 0) + (layer "F.Fab") + (uuid "2e390c47-779d-4587-8c70-b24269f1c29f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "3974cd12-b625-4036-b7f0-95b74122f89f") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "a093d798-154d-4b3a-9c9d-27d0b0803a6e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -1.4 -1.4) + (end -1.4 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "9fd8924e-59be-4220-a4f0-8826996718c3") + ) + (fp_line + (start -1.4 1.27) + (end -1.4 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "ebba8f54-4f64-4ee3-83f7-542a3b4ce9ff") + ) + (fp_line + (start -1.4 19.18) + (end 14.1 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "1f01e891-6f4f-4dbc-a764-ed5fd2883408") + ) + (fp_line + (start 0 -1.4) + (end -1.4 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "888e952f-fd10-49c1-b504-52c23dad5a2e") + ) + (fp_line + (start 1.27 -1.4) + (end 1.27 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "84170ae6-30b0-4c7a-a047-8ffd9eac9d74") + ) + (fp_line + (start 1.27 1.27) + (end -1.4 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7cd939fe-f239-48b0-84b0-db4c73b495b0") + ) + (fp_line + (start 1.27 1.27) + (end 1.27 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "878a80d1-cd31-4ad5-b401-47da6eede999") + ) + (fp_line + (start 11.43 -1.4) + (end 11.43 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "721011f6-9bad-4233-8e51-f343d657ca00") + ) + (fp_line + (start 14.1 -1.4) + (end 1.27 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "759b5851-f0dc-4bf5-b98e-4fd9c1b2c87b") + ) + (fp_line + (start 14.1 19.18) + (end 14.1 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "15be6a81-38cd-48c0-a658-95ca1cf860cf") + ) + (fp_line + (start -1.53 -1.52) + (end -1.53 19.3) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "71197baa-69d8-4f8f-9ffd-241132fcf73a") + ) + (fp_line + (start -1.53 -1.52) + (end 14.21 -1.52) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b74ddb9a-007d-4b73-9c0a-645308fec65a") + ) + (fp_line + (start 14.21 19.3) + (end -1.53 19.3) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d37b421c-1844-4dc2-ae83-79c1411d8c89") + ) + (fp_line + (start 14.21 19.3) + (end 14.21 -1.52) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "1bfa112d-e2a6-4dd2-9ed5-a9eeda41f009") + ) + (fp_line + (start -1.27 0) + (end 0 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "29499d72-54e9-40d1-8791-5581662227be") + ) + (fp_line + (start -1.27 19.05) + (end -1.27 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "35af0296-2cb7-431b-8543-e8d68c22ab11") + ) + (fp_line + (start 0 -1.27) + (end 13.97 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3065d307-d27b-4459-a59d-4b98af61841d") + ) + (fp_line + (start 13.97 -1.27) + (end 13.97 19.05) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "41f5b452-4e42-4293-8e21-149fa3213f1c") + ) + (fp_line + (start 13.97 19.05) + (end -1.27 19.05) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b9869771-847d-40cc-8a79-af275c85fb38") + ) + (fp_text user "${REFERENCE}" + (at 6.35 0 0) + (layer "F.Fab") + (uuid "82866c8a-11ec-4480-b5f2-9f133ec9ac4c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "a5bf6fea-baf2-47b3-a4de-8b32482d1fec") + (net 1 "/GND") + (uuid "46ac1755-874b-5ba3-94df-7474e04fd254") + ) + (pad "2" thru_hole oval + (at 0 2.54 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "5fa27605-9535-40c5-8d2d-0036dbfbd977") + (net 3 "/+3V3") + (uuid "5d31f506-4764-5c2c-9919-b495acfd363d") + ) + (pad "3" thru_hole oval + (at 0 5.08 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "567c6f9a-ceba-4996-baf1-d518b7cfc1b8") + (net 34 "/X_1B") + (uuid "be73d376-6dc6-5c5f-a19e-640336167223") + ) + (pad "4" thru_hole oval + (at 0 7.62 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "6ce49674-00e7-4943-a7d1-ce6de8f047bb") + (net 33 "/X_1A") + (uuid "6fcb89cb-a1c9-58a4-b596-2e2d7aa0536e") + ) + (pad "5" thru_hole oval + (at 0 10.16 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "e6577bf3-114f-40f7-9ba0-e5a48d073d09") + (net 35 "/X_2A") + (uuid "976e5c2e-503c-5a21-8b10-1d117f1779e4") + ) + (pad "6" thru_hole oval + (at 0 12.7 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "ea59663c-dd2b-49a4-aceb-928cd2103174") + (net 36 "/X_2B") + (uuid "6e425090-4359-5be3-93a1-666b8d6b19e5") + ) + (pad "7" thru_hole oval + (at 0 15.24 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "8c37b18a-4212-47fc-9def-1e1911f29a8f") + (net 1 "/GND") + (uuid "815e03db-ca54-55b2-a74a-fbaa85ebc817") + ) + (pad "8" thru_hole oval + (at 0 17.78 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "af5e149d-65b5-47d1-93a1-6f0bcce1e672") + (net 2 "/+12V") + (uuid "7f5e5559-65f0-5a76-9e9f-759505d897c5") + ) + (pad "9" thru_hole oval + (at 12.7 17.78 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "27a7cd1a-78f1-4fbd-ae91-3389acd852e1") + (net 8 "/DRV_EN") + (uuid "b7de2659-ae82-5d96-bcd2-312a72a83a2a") + ) + (pad "10" thru_hole oval + (at 12.7 15.24 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "f2c14cae-1d8f-41be-b78b-5954bdddae1b") + (net 3 "/+3V3") + (uuid "0267f676-128e-5c75-a151-f5892ae122bd") + ) + (pad "11" thru_hole oval + (at 12.7 12.7 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "10776c48-2eaa-431b-8de2-6a3291f4f0f7") + (net 3 "/+3V3") + (uuid "b4205c84-e1cf-59a2-8be2-ccb48524cb3f") + ) + (pad "12" thru_hole oval + (at 12.7 10.16 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "51b86555-2619-45da-af9c-4c0e580657fc") + (net 3 "/+3V3") + (uuid "945c1e56-2f52-584a-8f4e-7196f2fa2a15") + ) + (pad "13" thru_hole oval + (at 12.7 7.62 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "0fced33b-9b6c-410b-b200-84a860f57f4a") + (net 3 "/+3V3") + (uuid "9b9adc60-1c4c-5cb1-aee2-bbb690595dd8") + ) + (pad "14" thru_hole oval + (at 12.7 5.08 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "c95ddd35-51ec-4578-826e-0e9625e86489") + (net 3 "/+3V3") + (uuid "ede8b2d5-7b56-504b-8703-1e3c499336ae") + ) + (pad "15" thru_hole oval + (at 12.7 2.54 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "1cef4470-7a63-4408-bfdd-2738afea9d7d") + (net 38 "/X_STEP") + (uuid "7bd7855d-966b-5e86-b190-fe9d24a197c1") + ) + (pad "16" thru_hole oval + (at 12.7 0 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "de170945-c365-417e-bd94-f8aafba2aa2a") + (net 37 "/X_DIR") + (uuid "030b34ec-07a8-5ab1-9239-28bb0034fc44") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Module.3dshapes/Pololu_Breakout-16_15.2x20.3mm.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/b3bed31e-4ebe-57b0-8327-9f8ac130ab57") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Module:Pololu_Breakout-16_15.2x20.3mm" + (layer "F.Cu") + (uuid "798a2a26-60f9-5470-9285-04eb2ef74b0b") + (at 159.1 101.9 270) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bcc2a2c6-1471-5270-8aba-1f848dc9c8f5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Pololu Breakout 16-pin 15.2x20.3mm 0.6x0.8") + (tags "Pololu Breakout") + (property "Reference" "A2" + (at 6.35 -2.54 0) + (layer "F.SilkS") + (uuid "05ccdf2f-c4f0-4475-bcd9-f1ec554057f0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "DRV8825 StepStick (rho/arm)" + (at 6.35 20.17 0) + (layer "F.Fab") + (uuid "2e390c47-779d-4587-8c70-b24269f1c29f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "3974cd12-b625-4036-b7f0-95b74122f89f") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "a093d798-154d-4b3a-9c9d-27d0b0803a6e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -1.4 -1.4) + (end -1.4 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "9fd8924e-59be-4220-a4f0-8826996718c3") + ) + (fp_line + (start -1.4 1.27) + (end -1.4 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "ebba8f54-4f64-4ee3-83f7-542a3b4ce9ff") + ) + (fp_line + (start -1.4 19.18) + (end 14.1 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "1f01e891-6f4f-4dbc-a764-ed5fd2883408") + ) + (fp_line + (start 0 -1.4) + (end -1.4 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "888e952f-fd10-49c1-b504-52c23dad5a2e") + ) + (fp_line + (start 1.27 -1.4) + (end 1.27 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "84170ae6-30b0-4c7a-a047-8ffd9eac9d74") + ) + (fp_line + (start 1.27 1.27) + (end -1.4 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7cd939fe-f239-48b0-84b0-db4c73b495b0") + ) + (fp_line + (start 1.27 1.27) + (end 1.27 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "878a80d1-cd31-4ad5-b401-47da6eede999") + ) + (fp_line + (start 11.43 -1.4) + (end 11.43 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "721011f6-9bad-4233-8e51-f343d657ca00") + ) + (fp_line + (start 14.1 -1.4) + (end 1.27 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "759b5851-f0dc-4bf5-b98e-4fd9c1b2c87b") + ) + (fp_line + (start 14.1 19.18) + (end 14.1 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "15be6a81-38cd-48c0-a658-95ca1cf860cf") + ) + (fp_line + (start -1.53 -1.52) + (end -1.53 19.3) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "71197baa-69d8-4f8f-9ffd-241132fcf73a") + ) + (fp_line + (start -1.53 -1.52) + (end 14.21 -1.52) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b74ddb9a-007d-4b73-9c0a-645308fec65a") + ) + (fp_line + (start 14.21 19.3) + (end -1.53 19.3) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d37b421c-1844-4dc2-ae83-79c1411d8c89") + ) + (fp_line + (start 14.21 19.3) + (end 14.21 -1.52) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "1bfa112d-e2a6-4dd2-9ed5-a9eeda41f009") + ) + (fp_line + (start -1.27 0) + (end 0 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "29499d72-54e9-40d1-8791-5581662227be") + ) + (fp_line + (start -1.27 19.05) + (end -1.27 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "35af0296-2cb7-431b-8543-e8d68c22ab11") + ) + (fp_line + (start 0 -1.27) + (end 13.97 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3065d307-d27b-4459-a59d-4b98af61841d") + ) + (fp_line + (start 13.97 -1.27) + (end 13.97 19.05) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "41f5b452-4e42-4293-8e21-149fa3213f1c") + ) + (fp_line + (start 13.97 19.05) + (end -1.27 19.05) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b9869771-847d-40cc-8a79-af275c85fb38") + ) + (fp_text user "${REFERENCE}" + (at 6.35 0 0) + (layer "F.Fab") + (uuid "82866c8a-11ec-4480-b5f2-9f133ec9ac4c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "a5bf6fea-baf2-47b3-a4de-8b32482d1fec") + (net 1 "/GND") + (uuid "e6a68a71-7689-5fd4-b4ff-b125e048a388") + ) + (pad "2" thru_hole oval + (at 0 2.54 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "5fa27605-9535-40c5-8d2d-0036dbfbd977") + (net 3 "/+3V3") + (uuid "ae861326-1082-536e-9aae-ab810a0f5ef3") + ) + (pad "3" thru_hole oval + (at 0 5.08 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "567c6f9a-ceba-4996-baf1-d518b7cfc1b8") + (net 40 "/Y_1B") + (uuid "a6bb68ea-9c4f-51e4-9ae7-8cb786e5351e") + ) + (pad "4" thru_hole oval + (at 0 7.62 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "6ce49674-00e7-4943-a7d1-ce6de8f047bb") + (net 39 "/Y_1A") + (uuid "a972d730-23c7-5f70-9469-1ed7edbb7627") + ) + (pad "5" thru_hole oval + (at 0 10.16 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "e6577bf3-114f-40f7-9ba0-e5a48d073d09") + (net 41 "/Y_2A") + (uuid "e95cf71d-122b-511b-87fc-c987a21e02eb") + ) + (pad "6" thru_hole oval + (at 0 12.7 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "ea59663c-dd2b-49a4-aceb-928cd2103174") + (net 42 "/Y_2B") + (uuid "85e67c7d-8217-529b-bbc5-d5a214facb60") + ) + (pad "7" thru_hole oval + (at 0 15.24 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "8c37b18a-4212-47fc-9def-1e1911f29a8f") + (net 1 "/GND") + (uuid "1be548a6-ff01-56f7-a112-347ea2086e33") + ) + (pad "8" thru_hole oval + (at 0 17.78 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "af5e149d-65b5-47d1-93a1-6f0bcce1e672") + (net 2 "/+12V") + (uuid "da95ad5c-f21c-552d-8c57-de5ff6151de1") + ) + (pad "9" thru_hole oval + (at 12.7 17.78 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "27a7cd1a-78f1-4fbd-ae91-3389acd852e1") + (net 8 "/DRV_EN") + (uuid "12418b60-925f-5602-9465-57556cb17100") + ) + (pad "10" thru_hole oval + (at 12.7 15.24 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "f2c14cae-1d8f-41be-b78b-5954bdddae1b") + (net 3 "/+3V3") + (uuid "ee443ee9-0e73-5697-a408-7bed310a8c20") + ) + (pad "11" thru_hole oval + (at 12.7 12.7 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "10776c48-2eaa-431b-8de2-6a3291f4f0f7") + (net 3 "/+3V3") + (uuid "a98c3f59-9ade-582c-8afd-8153bfd9d1af") + ) + (pad "12" thru_hole oval + (at 12.7 10.16 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "51b86555-2619-45da-af9c-4c0e580657fc") + (net 3 "/+3V3") + (uuid "a9a1b86b-2725-5fc3-bcca-6468c5b442b5") + ) + (pad "13" thru_hole oval + (at 12.7 7.62 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "0fced33b-9b6c-410b-b200-84a860f57f4a") + (net 3 "/+3V3") + (uuid "767b2ef1-f35c-5bec-8ce1-78487848b3ef") + ) + (pad "14" thru_hole oval + (at 12.7 5.08 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "c95ddd35-51ec-4578-826e-0e9625e86489") + (net 3 "/+3V3") + (uuid "624494b6-a629-5f93-9000-73ad80bd3fd6") + ) + (pad "15" thru_hole oval + (at 12.7 2.54 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "1cef4470-7a63-4408-bfdd-2738afea9d7d") + (net 44 "/Y_STEP") + (uuid "b2de5a2b-f1ac-5a67-828d-2290bc6a186c") + ) + (pad "16" thru_hole oval + (at 12.7 0 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "de170945-c365-417e-bd94-f8aafba2aa2a") + (net 43 "/Y_DIR") + (uuid "30cced1e-7a4f-59a9-8dfc-874f03f1f688") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Module.3dshapes/Pololu_Breakout-16_15.2x20.3mm.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/1a7133b1-be90-5e2d-be8e-8b3325c622d3") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:CP_Elec_8x10" + (layer "F.Cu") + (uuid "198db8a8-e023-5c12-9103-1cb3f901fe55") + (at 124 121) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "04605543-01f6-573d-aeb2-d96d6eff8320") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SMD capacitor, aluminum electrolytic, Nichicon, 8.0x10mm") + (tags "capacitor electrolytic") + (property "Reference" "C1" + (uuid "faa0c7f3-5e06-5c00-a064-5522e09a4480") + (at 0 -5.2 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "100uF 25V" + (uuid "2d82fd04-aeb5-5a4e-bd2c-96bcb254f4d4") + (at 0 5.2 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -5.5 -2.51) + (end -4.5 -2.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -5 -3.01) + (end -5 -2.01) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 -3.195563) + (end -4.26 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 -3.195563) + (end -3.195563 -4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 3.195563) + (end -4.26 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 3.195563) + (end -3.195563 4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.195563 -4.26) + (end 4.26 -4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.195563 4.26) + (end 4.26 4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 4.26 -4.26) + (end 4.26 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 4.26 4.26) + (end 4.26 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -5.25 -1.5) + (end -5.25 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -5.25 1.5) + (end -4.4 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -3.25) + (end -4.4 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -3.25) + (end -3.25 -4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -1.5) + (end -5.25 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 1.5) + (end -4.4 3.25) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 3.25) + (end -3.25 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.25 -4.4) + (end 4.4 -4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.25 4.4) + (end 4.4 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 -4.4) + (end 4.4 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 -1.5) + (end 5.25 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 1.5) + (end 4.4 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 5.25 -1.5) + (end 5.25 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 5.25 1.5) + (end 4.4 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.15 -3.15) + (end -4.15 3.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -4.15 -3.15) + (end -3.15 -4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -4.15 3.15) + (end -3.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.562278 -1.5) + (end -2.762278 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.162278 -1.9) + (end -3.162278 -1.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.15 -4.15) + (end 4.15 -4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.15 4.15) + (end 4.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 4.15 -4.15) + (end 4.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_circle + (center 0 0) + (end 4 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -3.25 0) + (size 3.5 2.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1) + (net 2 "/+12V") + (uuid "3a4b5304-1b31-51e7-8fb2-cc61e381f52e") + ) + (pad "2" smd roundrect + (at 3.25 0) + (size 3.5 2.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1) + (net 1 "/GND") + (uuid "2380ede0-abf3-55bc-b06c-2ddea4be5f4f") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/6e1bc80c-cb62-5987-b5d6-eac62ab087e5") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "2a991bf7-1043-5da7-a4d4-d96f12af763e") + (at 155 155 90) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e7cd7544-0c81-5687-b42e-a5059255cac2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C10" + (uuid "7780bc9f-3a55-5321-8ec7-cfd92f69763e") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "d07e6b77-0879-5152-86c4-a7829098454b") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "f71fc3e2-60eb-5f48-a4b8-0bb66122b10b") + ) + (pad "2" smd roundrect + (at 0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "b3b5c855-ad02-5595-a8f9-dd26555caf54") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/eef2da2b-6409-51d5-a615-8a0b429293e3") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "a84c6ef3-402b-51e4-8b98-774a5a0abf9a") + (at 161 118.5) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f0725150-b74d-576c-b411-d3cfdb399929") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C13" + (uuid "06ac2f3f-992a-5cd8-b585-ea13e2c82f4c") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "c6ff36a4-8758-5b1d-8ffe-d1428a8f80bd") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 15 "/HOME") + (uuid "a69e994a-bf03-5671-ae26-3c65e2e18d8c") + ) + (pad "2" smd roundrect + (at 0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "576e416f-e6a3-591f-970b-1e1f76a3b87d") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/00db1c8e-91ac-582c-bc84-a655be0745b8") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "3573c0b9-e336-5058-9919-393390c79c28") + (at 161 120.7) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "01f70323-4307-595c-bcc7-b33eaede7ea5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C14" + (uuid "280ecafc-cfba-5d4d-8863-2b5dce4d2d07") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "4b2c965d-d9ea-5730-a9d7-7fb16d601509") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 13 "/HALL") + (uuid "bef1f21b-50b5-59a2-b9df-8b31eb07cc9d") + ) + (pad "2" smd roundrect + (at 0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "1eed937c-e84a-5354-9646-bdb398980887") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/5ebd8202-e921-5da6-b535-685eaf6f1d8e") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "47bfb66c-dde9-58c1-8673-c81d4af0cee3") + (at 161 130 90) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "3b1d0a5f-5865-52ff-8df9-1aeee6f29a56") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C15" + (uuid "9b561f91-9e9b-5f7a-8683-1c7f51439931") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "86a756a8-24f6-5a18-9ea5-dd13664c9bfd") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 4 "/+5V") + (uuid "fed9be4a-10bc-5126-88cf-cbed94821b55") + ) + (pad "2" smd roundrect + (at 0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "cc2b3687-383a-5c8a-89c0-7d03c7f884f0") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/25fb3a75-18c1-52bc-bf72-56c946150f28") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:CP_Elec_8x10" + (layer "F.Cu") + (uuid "2cde9fe5-e266-57d3-820a-aea7371bbdb0") + (at 145.5 121) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "c8d7ac01-5ef9-5341-a702-8d715eddfd87") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SMD capacitor, aluminum electrolytic, Nichicon, 8.0x10mm") + (tags "capacitor electrolytic") + (property "Reference" "C2" + (uuid "4d7a4c1d-b5e2-5a88-89bf-168039c34493") + (at 0 -5.2 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "100uF 25V" + (uuid "06ce39d8-182d-5f1e-bcc3-7fe5588375bd") + (at 0 5.2 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -5.5 -2.51) + (end -4.5 -2.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -5 -3.01) + (end -5 -2.01) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 -3.195563) + (end -4.26 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 -3.195563) + (end -3.195563 -4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 3.195563) + (end -4.26 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 3.195563) + (end -3.195563 4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.195563 -4.26) + (end 4.26 -4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.195563 4.26) + (end 4.26 4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 4.26 -4.26) + (end 4.26 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 4.26 4.26) + (end 4.26 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -5.25 -1.5) + (end -5.25 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -5.25 1.5) + (end -4.4 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -3.25) + (end -4.4 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -3.25) + (end -3.25 -4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -1.5) + (end -5.25 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 1.5) + (end -4.4 3.25) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 3.25) + (end -3.25 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.25 -4.4) + (end 4.4 -4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.25 4.4) + (end 4.4 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 -4.4) + (end 4.4 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 -1.5) + (end 5.25 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 1.5) + (end 4.4 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 5.25 -1.5) + (end 5.25 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 5.25 1.5) + (end 4.4 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.15 -3.15) + (end -4.15 3.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -4.15 -3.15) + (end -3.15 -4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -4.15 3.15) + (end -3.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.562278 -1.5) + (end -2.762278 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.162278 -1.9) + (end -3.162278 -1.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.15 -4.15) + (end 4.15 -4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.15 4.15) + (end 4.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 4.15 -4.15) + (end 4.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_circle + (center 0 0) + (end 4 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -3.25 0) + (size 3.5 2.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1) + (net 2 "/+12V") + (uuid "ab8e16d9-dbf7-52f7-afaa-961b90c82c6e") + ) + (pad "2" smd roundrect + (at 3.25 0) + (size 3.5 2.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1) + (net 1 "/GND") + (uuid "cdb56614-350b-5d7e-ae0b-bbf1978b7214") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/94674d34-a062-5d75-9308-274f6e8ac33e") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_1206_3216Metric" + (layer "F.Cu") + (uuid "cccc68f1-0cbd-51eb-9d73-5875dfb9bb80") + (at 120.5 139.6) + (property "LCSC" "C13585" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "39789304-dfde-584e-b1ef-0ff7ad818e1d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C3" + (uuid "c190275b-271a-519f-a8e4-0143daa6fd38") + (at 0 -1.85 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF 25V" + (uuid "ec7d005d-bd02-5251-9ca1-f7e9d06b1e10") + (at 0 1.85 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.711252 -0.91) + (end 0.711252 -0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.711252 0.91) + (end 0.711252 0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.3 -1.15) + (end 2.3 1.15) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1.6 -0.8) + (end 1.6 0.8) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (pad "1" smd roundrect + (at -1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 2 "/+12V") + (uuid "c414e767-f891-5646-821b-33f2a81868af") + ) + (pad "2" smd roundrect + (at 1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 1 "/GND") + (uuid "edddac33-b2c3-5314-b9ef-9f31fa182808") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d8c84f00-0c2b-57fe-925d-6813a5c4e8cf") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_1206_3216Metric" + (layer "F.Cu") + (uuid "d313bea1-0653-54f8-a2ac-8a4a113a7032") + (at 126 139.6) + (property "LCSC" "C13585" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "1113b88b-0bed-540e-a8e3-b87412989d19") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C4" + (uuid "84d1440a-73b3-5b7f-b9cc-7dc8d685f32f") + (at 0 -1.85 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF 16V" + (uuid "2a2d7801-73d5-5044-8e31-d1d0c0956642") + (at 0 1.85 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.711252 -0.91) + (end 0.711252 -0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.711252 0.91) + (end 0.711252 0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.3 -1.15) + (end 2.3 1.15) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1.6 -0.8) + (end 1.6 0.8) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (pad "1" smd roundrect + (at -1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 5 "/+5V_REG") + (uuid "ad2ff147-0071-5bb8-86c4-097de64fdf49") + ) + (pad "2" smd roundrect + (at 1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 1 "/GND") + (uuid "47dd160b-004e-5ed3-9264-57c02b3365bb") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/a962269d-1c75-523f-beb6-0da18c5d2f18") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0805_2012Metric" + (layer "F.Cu") + (uuid "63297324-fc3a-5fdc-809c-5545237c1f10") + (at 159.6 144 90) + (property "LCSC" "C15850" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ed7642f1-51e0-5f56-8485-70dbf525bec1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C5" + (uuid "2c70401e-d42a-54a0-aa82-5b7ee8fc6b23") + (at 0 -1.68 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF" + (uuid "5864a8e5-fc38-5699-b2f1-36077cf64b9b") + (at 0 1.68 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.261252 -0.735) + (end 0.261252 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.261252 0.735) + (end 0.261252 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.7 -0.98) + (end 1.7 0.98) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1 -0.625) + (end 1 0.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.5 0.5) + (thickness 0.08) + ) + ) + ) + (pad "1" smd roundrect + (at -0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 4 "/+5V") + (uuid "69384807-cc90-5805-9e8e-d32f72a7287f") + ) + (pad "2" smd roundrect + (at 0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "37656d2d-2a29-50cc-8f81-3a33a668d4e3") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/f5d22db1-0d75-58c3-aa8d-cdfad0b729e2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0805_2012Metric" + (layer "F.Cu") + (uuid "f4c0d708-be5a-535f-a8b2-02688c5dea9a") + (at 159.6 139.5 90) + (property "LCSC" "C45783" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "6e8f852d-281b-572b-9735-53c619b21716") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C6" + (uuid "1172212d-637e-510f-88f9-492c144b9439") + (at 0 -1.68 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "22uF" + (uuid "cffe7c51-fd0b-5e83-bbaf-afdfb5fcf54f") + (at 0 1.68 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.261252 -0.735) + (end 0.261252 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.261252 0.735) + (end 0.261252 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.7 -0.98) + (end 1.7 0.98) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1 -0.625) + (end 1 0.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.5 0.5) + (thickness 0.08) + ) + ) + ) + (pad "1" smd roundrect + (at -0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "d6cdffb3-868a-5612-b27a-8da6c5e7459f") + ) + (pad "2" smd roundrect + (at 0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "917390b9-1417-5d6b-a3bc-2fa23241293a") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/8db23ce3-3324-5a54-995d-c8e3d38448e2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "90ce0294-808c-5fbf-bd0e-f693e9492f53") + (at 127 143 90) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "869f8f68-c756-534e-b906-d0cf2f0f7dd2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C7" + (uuid "a496f552-a6fd-5cff-9597-930f412e723d") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "cf2afce2-3ab8-5fd7-b81d-21af98259ed9") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "211967dd-8c4d-5cae-ab6c-c5560d06e6a9") + ) + (pad "2" smd roundrect + (at 0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "5569207e-2272-513d-8137-7d57413cdd7f") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/b44c0a62-31e7-5f22-b0c2-204702902245") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "6de7e892-ddd8-532e-a6d4-253a451b5c85") + (at 154.6 152.7) + (property "LCSC" "C15849" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "daf7529b-5249-5b08-8dc4-85fa0ffb295f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C8" + (uuid "c6059a67-1793-5970-8c37-5e867cdbe5c3") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1uF" + (uuid "66323709-8729-5efe-b8f2-b5b6bd92d787") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 10 "/EN") + (uuid "775fcb88-03ce-5d6c-bd0f-2f2104723f4e") + ) + (pad "2" smd roundrect + (at 0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "8cc16537-7428-5b02-bb3f-aa8e1062d347") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/18cbfacf-9548-5796-88c0-04204a991c37") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0805_2012Metric" + (layer "F.Cu") + (uuid "69ff356d-ad0e-5160-aa9a-920c50f80cd2") + (at 157.5 154.6 90) + (property "LCSC" "C15850" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f50487ce-6cc7-5917-a5be-2f874e379164") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C9" + (uuid "98919885-e225-5a87-ae38-f174769f865d") + (at 0 -1.68 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF" + (uuid "3c8b9c96-bce5-5006-8acd-87fd50b73c25") + (at 0 1.68 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.261252 -0.735) + (end 0.261252 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.261252 0.735) + (end 0.261252 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.7 -0.98) + (end 1.7 0.98) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1 -0.625) + (end 1 0.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.5 0.5) + (thickness 0.08) + ) + ) + ) + (pad "1" smd roundrect + (at -0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "8c4a35ec-8acd-585d-a835-1015eebdf1eb") + ) + (pad "2" smd roundrect + (at 0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "4ec8ddcb-3fe4-5b33-8bf8-18a53cf0a9e9") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/8f9eda86-de49-5f22-8d1d-1eec8a8e48d3") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Diode_SMD:D_SMA" + (layer "F.Cu") + (uuid "feea4a78-723d-524f-a904-88a2d3f5d217") + (at 116 122 270) + (property "LCSC" "C8678" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bb876cdb-8a7d-5f2f-9125-90be42b6a57d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Diode SMA (DO-214AC)") + (tags "Diode SMA (DO-214AC)") + (property "Reference" "D1" + (at 0 -2.5 0) + (layer "F.SilkS") + (uuid "78f18f7d-f8a5-43e4-98c1-400155beaace") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "SS34" + (at 0 2.6 0) + (layer "F.Fab") + (uuid "d8100462-8cef-473f-be33-7f843be6851c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "c4278de3-51d4-45cb-b37b-42a667e66bc5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "aa802e2b-7add-4e63-bcb2-5328ca681d3d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -3.51 -1.65) + (end -3.51 1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412") + ) + (fp_line + (start -3.51 -1.65) + (end 2 -1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307") + ) + (fp_line + (start -3.51 1.65) + (end 2 1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "dff34e10-67ca-4b77-95c8-838244782165") + ) + (fp_line + (start -3.5 -1.75) + (end 3.5 -1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837") + ) + (fp_line + (start -3.5 1.75) + (end -3.5 -1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2dd2626e-6f74-400d-9266-48b047137055") + ) + (fp_line + (start 3.5 -1.75) + (end 3.5 1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4ca79e24-2e7b-47bd-871d-fec997d695df") + ) + (fp_line + (start 3.5 1.75) + (end -3.5 1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d08df98a-2ea9-4491-a654-062a8028f290") + ) + (fp_line + (start -2.3 1.5) + (end -2.3 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5") + ) + (fp_line + (start -0.64944 -0.79908) + (end -0.64944 0.80112) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0f99da12-e271-4d4a-8797-6ea6343d195d") + ) + (fp_line + (start -0.64944 0.00102) + (end -1.55114 0.00102) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361") + ) + (fp_line + (start -0.64944 0.00102) + (end 0.50118 -0.79908) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa") + ) + (fp_line + (start -0.64944 0.00102) + (end 0.50118 0.75032) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d55225e2-3236-4507-bfd9-80a48f293c40") + ) + (fp_line + (start 0.50118 0.00102) + (end 1.4994 0.00102) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "46fe74cf-81ca-444c-a727-666d0e34a994") + ) + (fp_line + (start 0.50118 0.75032) + (end 0.50118 -0.79908) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7c1208d5-7637-4920-8943-369f975b8a74") + ) + (fp_line + (start 2.3 -1.5) + (end -2.3 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032") + ) + (fp_line + (start 2.3 -1.5) + (end 2.3 1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d13e07f1-e4fe-4d02-b51c-871844057f50") + ) + (fp_line + (start 2.3 1.5) + (end -2.3 1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f849bb85-eee3-44d9-b881-7f1627d4304a") + ) + (fp_text user "${REFERENCE}" + (at 0 -2.5 0) + (layer "F.Fab") + (uuid "84118230-d2f4-4bb3-819b-e1cb088384b6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -2 0 270) + (size 2.5 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1388888889) + (uuid "e092a9e8-b915-4f8c-82db-96bdde4366ac") + (net 2 "/+12V") + (uuid "d6d98eda-2c45-5431-b5b2-57501409207f") + ) + (pad "2" smd roundrect + (at 2 0 270) + (size 2.5 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1388888889) + (uuid "7c00314a-7875-4f2e-ac99-32554d25fcd6") + (net 32 "/VIN_RAW") + (uuid "9a8bef7d-d4d0-543f-bee7-cf36ba4c80c4") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/e6f704cd-1a92-526e-8a4f-3b691b41894f") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Diode_SMD:D_SOD-123" + (layer "F.Cu") + (uuid "e6a2fc38-1328-59f8-be21-ea939d93f729") + (at 129 135) + (property "LCSC" "C8598" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "508b9d2d-cdcc-5f5c-921f-03545412ee17") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOD-123") + (tags "SOD-123") + (property "Reference" "D2" + (at 0 -2 0) + (layer "F.SilkS") + (uuid "5c813cbc-84b5-45a4-a0aa-35d3573110db") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "B5819W" + (at 0 2.1 0) + (layer "F.Fab") + (uuid "12459980-93ec-4d14-a5d8-25465bd8b01f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "9df2fb6c-9a01-450c-8dda-024b1c6ddfcc") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "434b35bb-86e7-4a80-b86a-8dfd526da733") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -2.36 -1) + (end -2.36 1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "de699020-a29a-4525-a22d-28ad5ded289c") + ) + (fp_line + (start -2.36 -1) + (end 1.65 -1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e1b647a2-f10b-41c9-a10d-290cc557cf1b") + ) + (fp_line + (start -2.36 1) + (end 1.65 1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "bb8e1113-3a33-4b8a-8d4d-dc28453c23b3") + ) + (fp_line + (start -2.35 -1.15) + (end -2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f234f584-a276-4f4c-b983-7f290a1e5747") + ) + (fp_line + (start -2.35 -1.15) + (end 2.35 -1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4aacff46-a0e4-4a7e-adc9-4cb9bcd268bd") + ) + (fp_line + (start 2.35 -1.15) + (end 2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f57b8828-8e33-4d6a-ba4b-817e53acd1da") + ) + (fp_line + (start 2.35 1.15) + (end -2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "277b3168-086d-4feb-9ab8-026e88452a58") + ) + (fp_line + (start -1.4 -0.9) + (end 1.4 -0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "4ad4e92b-9b64-4eed-8c4b-d96097a88e61") + ) + (fp_line + (start -1.4 0.9) + (end -1.4 -0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "1ac565ca-970b-44d3-9087-59b04ab60eae") + ) + (fp_line + (start -0.75 0) + (end -0.35 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "46dc275b-0899-4d0d-8713-b622e0c22f0e") + ) + (fp_line + (start -0.35 0) + (end -0.35 -0.55) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9b27c55d-1944-4b36-b982-eb719a46d948") + ) + (fp_line + (start -0.35 0) + (end -0.35 0.55) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "68f6cd3c-fdce-44a9-af86-78cf47501eda") + ) + (fp_line + (start -0.35 0) + (end 0.25 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e7535fdf-c98f-460e-b3e7-c5c3c78dc09f") + ) + (fp_line + (start 0.25 -0.4) + (end 0.25 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "00b1df15-efaf-4389-b1a8-f9ec8af76c39") + ) + (fp_line + (start 0.25 0) + (end 0.75 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "44d78e10-5c1c-4284-ba9c-163e5208ec30") + ) + (fp_line + (start 0.25 0.4) + (end -0.35 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c82b3165-5533-40f3-a703-e13e1a64873f") + ) + (fp_line + (start 1.4 -0.9) + (end 1.4 0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c36e9a65-0388-45d7-9b3b-1648a22d40d4") + ) + (fp_line + (start 1.4 0.9) + (end -1.4 0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3ea8d381-2884-4493-a631-0d00c072c3e5") + ) + (fp_text user "${REFERENCE}" + (at 0 -2 0) + (layer "F.Fab") + (uuid "4ef1dce9-e176-4a2e-8fb0-c36ec2740b29") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -1.65 0) + (size 0.9 1.2) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "8ca7cf40-9887-436c-bea9-a303f4626eef") + (net 4 "/+5V") + (uuid "77df0d91-0317-58e6-981a-7e0663d30110") + ) + (pad "2" smd roundrect + (at 1.65 0) + (size 0.9 1.2) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "6df6f7bc-2215-4f91-8920-244285a2df55") + (net 5 "/+5V_REG") + (uuid "713c33cd-3936-5d29-9f8c-a9be59638380") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d00f60b7-51dd-51c1-bd90-f02a1bdf4114") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Diode_SMD:D_SOD-123" + (layer "F.Cu") + (uuid "08a18818-4d2e-52a8-ac2e-4fe964ce1571") + (at 113 139.8) + (property "LCSC" "C8598" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "b4ee2e91-f163-59e8-9509-9b6338806a33") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOD-123") + (tags "SOD-123") + (property "Reference" "D3" + (at 0 -2 0) + (layer "F.SilkS") + (uuid "5c813cbc-84b5-45a4-a0aa-35d3573110db") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "B5819W" + (at 0 2.1 0) + (layer "F.Fab") + (uuid "12459980-93ec-4d14-a5d8-25465bd8b01f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "9df2fb6c-9a01-450c-8dda-024b1c6ddfcc") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "434b35bb-86e7-4a80-b86a-8dfd526da733") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -2.36 -1) + (end -2.36 1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "de699020-a29a-4525-a22d-28ad5ded289c") + ) + (fp_line + (start -2.36 -1) + (end 1.65 -1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e1b647a2-f10b-41c9-a10d-290cc557cf1b") + ) + (fp_line + (start -2.36 1) + (end 1.65 1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "bb8e1113-3a33-4b8a-8d4d-dc28453c23b3") + ) + (fp_line + (start -2.35 -1.15) + (end -2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f234f584-a276-4f4c-b983-7f290a1e5747") + ) + (fp_line + (start -2.35 -1.15) + (end 2.35 -1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4aacff46-a0e4-4a7e-adc9-4cb9bcd268bd") + ) + (fp_line + (start 2.35 -1.15) + (end 2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f57b8828-8e33-4d6a-ba4b-817e53acd1da") + ) + (fp_line + (start 2.35 1.15) + (end -2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "277b3168-086d-4feb-9ab8-026e88452a58") + ) + (fp_line + (start -1.4 -0.9) + (end 1.4 -0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "4ad4e92b-9b64-4eed-8c4b-d96097a88e61") + ) + (fp_line + (start -1.4 0.9) + (end -1.4 -0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "1ac565ca-970b-44d3-9087-59b04ab60eae") + ) + (fp_line + (start -0.75 0) + (end -0.35 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "46dc275b-0899-4d0d-8713-b622e0c22f0e") + ) + (fp_line + (start -0.35 0) + (end -0.35 -0.55) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9b27c55d-1944-4b36-b982-eb719a46d948") + ) + (fp_line + (start -0.35 0) + (end -0.35 0.55) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "68f6cd3c-fdce-44a9-af86-78cf47501eda") + ) + (fp_line + (start -0.35 0) + (end 0.25 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e7535fdf-c98f-460e-b3e7-c5c3c78dc09f") + ) + (fp_line + (start 0.25 -0.4) + (end 0.25 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "00b1df15-efaf-4389-b1a8-f9ec8af76c39") + ) + (fp_line + (start 0.25 0) + (end 0.75 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "44d78e10-5c1c-4284-ba9c-163e5208ec30") + ) + (fp_line + (start 0.25 0.4) + (end -0.35 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c82b3165-5533-40f3-a703-e13e1a64873f") + ) + (fp_line + (start 1.4 -0.9) + (end 1.4 0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c36e9a65-0388-45d7-9b3b-1648a22d40d4") + ) + (fp_line + (start 1.4 0.9) + (end -1.4 0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3ea8d381-2884-4493-a631-0d00c072c3e5") + ) + (fp_text user "${REFERENCE}" + (at 0 -2 0) + (layer "F.Fab") + (uuid "4ef1dce9-e176-4a2e-8fb0-c36ec2740b29") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -1.65 0) + (size 0.9 1.2) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "8ca7cf40-9887-436c-bea9-a303f4626eef") + (net 4 "/+5V") + (uuid "578aa616-263f-56ca-b5d7-e60ac3cd383a") + ) + (pad "2" smd roundrect + (at 1.65 0) + (size 0.9 1.2) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "6df6f7bc-2215-4f91-8920-244285a2df55") + (net 31 "/VBUS") + (uuid "3634550f-f1ce-51a4-81b4-aca04a904a2b") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/dfd2dfe3-ff53-5171-b30b-1664ef15efba") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "LED_SMD:LED_0603_1608Metric" + (layer "F.Cu") + (uuid "96427fbd-f798-5b8b-992e-f95929de59f5") + (at 134 130) + (property "LCSC" "C72043" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d15e099d-b80e-54aa-bd4a-a7eea2c48927") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") + (tags "LED") + (property "Reference" "D4" + (uuid "ec4c1155-e8c0-54d1-a500-f916d60fb70b") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "GREEN" + (uuid "13679960-beac-5d8f-a14c-12bde62d6b98") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.485 -0.735) + (end -1.485 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.485 0.735) + (end 0.8 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.8 -0.735) + (end -1.485 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.8 -0.1) + (end -0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.8 0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.5 -0.4) + (end -0.8 -0.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0.8 -0.4) + (end -0.5 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0.8 0.4) + (end 0.8 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.7875 0) + (size 0.875 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "e89e1352-73af-5a85-8d64-9259766f8df6") + ) + (pad "2" smd roundrect + (at 0.7875 0) + (size 0.875 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 21 "/PWR_A") + (uuid "0cb22547-ceb1-5b4c-aa7d-55cc43c491e6") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d5d115dd-d95a-55f7-b8e6-9d5a871a10c2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "LED_SMD:LED_0603_1608Metric" + (layer "F.Cu") + (uuid "81d6af5b-3964-5087-a670-a75ab0703ee6") + (at 138 130) + (property "LCSC" "C72041" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "aa6dcdf9-7d94-5782-a933-e87df5627e7b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") + (tags "LED") + (property "Reference" "D5" + (uuid "4e96d6a8-f45f-5d1a-8922-2b630ce1c7b1") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "BLUE" + (uuid "d51a74b5-ae9c-5a74-a0a0-2a3114090050") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.485 -0.735) + (end -1.485 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.485 0.735) + (end 0.8 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.8 -0.735) + (end -1.485 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.8 -0.1) + (end -0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.8 0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.5 -0.4) + (end -0.8 -0.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0.8 -0.4) + (end -0.5 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0.8 0.4) + (end 0.8 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.7875 0) + (size 0.875 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "3dbbde60-063b-50d6-84e6-0ce456650f2f") + ) + (pad "2" smd roundrect + (at 0.7875 0) + (size 0.875 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 26 "/STAT_A") + (uuid "38e9a97f-2ec9-5d32-a9a1-bd64b8a4ba59") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/b832dc67-ac61-5cff-b5d4-6f2d2cdf6f9a") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "MountingHole:MountingHole_3.2mm_M3" + (layer "F.Cu") + (uuid "2a1c599c-6415-57a2-a9ab-703f370bb0be") + (at 115.24 107.54) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bc77a473-242a-5dba-999d-ca782bed6faf") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py") + (tags "mountinghole M3") + (property "Reference" "H1" + (uuid "7bae9581-700a-593c-ba05-6d47240e9872") + (at 0 -4.15 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M3" + (uuid "af1be946-6e50-5659-b565-c1829210e2f4") + (at 0 4.15 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr exclude_from_pos_files exclude_from_bom) + (fp_circle + (center 0 0) + (end 3.2 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + ) + (fp_circle + (center 0 0) + (end 3.45 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 0) + (size 3.2 3.2) + (drill 3.2) + (layers "*.Cu" "*.Mask") + (uuid "edb82e79-a435-593d-b646-634e7f78c56e") + ) + (embedded_fonts no) + (path "/a55fb8bf-893f-5507-b859-4affb8349791") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "MountingHole:MountingHole_3.2mm_M3" + (layer "F.Cu") + (uuid "410581e1-7b17-53bf-b0a3-1dfbcbfd9e21") + (at 113.97 155.8) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "3da4840f-5ad4-5ce4-8fc9-bc532e20c042") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py") + (tags "mountinghole M3") + (property "Reference" "H2" + (uuid "4a8f105f-6689-5dad-b7c8-e4093dc1f80f") + (at 0 -4.15 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M3" + (uuid "be8b045a-a0c4-541f-80d6-a6bf1193a367") + (at 0 4.15 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr exclude_from_pos_files exclude_from_bom) + (fp_circle + (center 0 0) + (end 3.2 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + ) + (fp_circle + (center 0 0) + (end 3.45 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 0) + (size 3.2 3.2) + (drill 3.2) + (layers "*.Cu" "*.Mask") + (uuid "9a9677d6-d505-5e0d-99b9-09287dd4c7ac") + ) + (embedded_fonts no) + (path "/036a4b56-52b2-5771-b3c6-5223c9161179") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "MountingHole:MountingHole_3.2mm_M3" + (layer "F.Cu") + (uuid "9a42c004-2b59-5dba-bb56-ac70a0b0e0e0") + (at 166.04 122.78) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "63a3b944-5261-5712-8635-9fc717d5f998") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py") + (tags "mountinghole M3") + (property "Reference" "H3" + (uuid "44c0bc15-79a9-5710-92d8-3d1b7c0a89f2") + (at 0 -4.15 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M3" + (uuid "b31ba191-5e36-53d9-8369-907c6138bf78") + (at 0 4.15 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr exclude_from_pos_files exclude_from_bom) + (fp_circle + (center 0 0) + (end 3.2 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + ) + (fp_circle + (center 0 0) + (end 3.45 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 0) + (size 3.2 3.2) + (drill 3.2) + (layers "*.Cu" "*.Mask") + (uuid "a772e3b0-5618-5fe5-9e1c-41e199a50d0a") + ) + (embedded_fonts no) + (path "/c9f982e9-5ced-5e2b-8969-2804505c7ee4") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "MountingHole:MountingHole_3.2mm_M3" + (layer "F.Cu") + (uuid "1624629f-55d9-5de0-b7d3-9694627b1f4d") + (at 166.04 150.72) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "a60c4481-468e-526b-9bdc-b1ba456b9ec7") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py") + (tags "mountinghole M3") + (property "Reference" "H4" + (uuid "1c7101c8-65d8-5047-9253-81e89229da3c") + (at 0 -4.15 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M3" + (uuid "b5a220a5-2c80-5944-b112-ecce83bb9484") + (at 0 4.15 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr exclude_from_pos_files exclude_from_bom) + (fp_circle + (center 0 0) + (end 3.2 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + ) + (fp_circle + (center 0 0) + (end 3.45 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 0) + (size 3.2 3.2) + (drill 3.2) + (layers "*.Cu" "*.Mask") + (uuid "8f3ed90a-2516-52fd-aeab-9f7320e84b17") + ) + (embedded_fonts no) + (path "/459d15f8-4315-546a-9288-98ab8f88b4b8") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal" + (layer "F.Cu") + (uuid "5548a4a4-1c3c-5a1b-b210-dba2baff838e") + (at 112.3 125 270) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d62132bb-40cb-51c0-87c3-51fb6e2fd72d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Barrel Jack, 2.0mm ID, 5.5mm OD, 24V, 8A, no switch, https://www.cui.com/product/resource/pj-063ah.pdf") + (tags "barrel jack cui dc power") + (property "Reference" "J1" + (at 0 -2.3 0) + (layer "F.SilkS") + (uuid "4121a2f6-118f-4220-a08b-294b72087f4d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "12V DC 5.5x2.1" + (at 0 13 0) + (layer "F.Fab") + (uuid "a72f9ad1-35e7-49c9-ba9c-cc973eb1367d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "12fc0690-0dfe-40b8-91f7-e0cc3b278fbf") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "45e06c7f-7ab6-4dd8-b6ed-33c63f308d2e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -5.11 -1.11) + (end -2.3 -1.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b31d6d79-ea1c-4c95-adb1-d21f1549c8f5") + ) + (fp_line + (start -5.11 4.95) + (end -5.11 -1.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "d7282e65-fbbb-4589-a2b7-746485f18a1e") + ) + (fp_line + (start -5.11 12.11) + (end -5.11 9.05) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "365c0f1f-1b45-4a4b-8710-f676ccb7d630") + ) + (fp_line + (start -1 -1.3) + (end 1 -1.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "4ce3e448-49de-451c-a0b3-03ea9eb41d6b") + ) + (fp_line + (start 2.3 -1.11) + (end 5.11 -1.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "d6075507-462e-487d-baae-66192f409fe0") + ) + (fp_line + (start 5.11 -1.11) + (end 5.11 4.95) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "05654b49-8885-4fc8-b161-e88b30d91441") + ) + (fp_line + (start 5.11 9.05) + (end 5.11 12.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "dfb16273-9f1d-4d4f-bfbe-7c84d769e98e") + ) + (fp_line + (start 5.11 12.11) + (end -5.11 12.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "75b837a2-4a72-4c7b-9bc8-f8054ed2e465") + ) + (fp_line + (start -6 -1.5) + (end -6 12.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "231c929b-1a06-477f-b119-0e42c6149b81") + ) + (fp_line + (start -6 12.5) + (end 6 12.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "da936a0b-44e9-4b73-9b11-0085280187ed") + ) + (fp_line + (start 6 -1.5) + (end -6 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "61183066-65c4-4fdd-b2f3-46f12eee4f84") + ) + (fp_line + (start 6 12.5) + (end 6 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "994a3c6b-3c6a-453c-a9e5-c29f4506fe10") + ) + (fp_line + (start -5 -1) + (end -1 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0c70ef17-066c-4008-bb24-d1c8e7b37da4") + ) + (fp_line + (start -5 12) + (end -5 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "501e4880-e200-4cae-9ec7-9f0ffa2744a5") + ) + (fp_line + (start -1 -1) + (end 0 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "bc59247c-c84d-4577-80df-c4829fcd00d7") + ) + (fp_line + (start 0 0) + (end 1 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9cb6c357-d528-480c-9621-8deecd3dd26f") + ) + (fp_line + (start 1 -1) + (end 5 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f57de3e0-3282-471e-8803-c93177d98f5c") + ) + (fp_line + (start 5 -1) + (end 5 12) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "56b2ce76-feed-441e-8190-961d8d9056a0") + ) + (fp_line + (start 5 12) + (end -5 12) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "823eaac6-3feb-4d65-b523-bfd790226bbb") + ) + (fp_text user "${REFERENCE}" + (at 0 5.5 0) + (layer "F.Fab") + (uuid "620f403a-3d36-48e5-8020-547abc139e82") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 9 270) + (size 1.6 1.6) + (drill 1.6) + (layers "*.Cu" "*.Mask") + (uuid "870945bb-682c-4978-abf1-e7f423b54994") + (uuid "b27de65b-74d0-50f5-9482-aab0af68f84f") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 4 2) + (drill oval 3 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "eea39138-d740-4b91-b2fe-3ba62fa313fd") + (net 32 "/VIN_RAW") + (uuid "372f69f9-a960-531f-8ec1-0a3f732c1ebb") + ) + (pad "2" thru_hole oval + (at 0 6 270) + (size 3.3 2) + (drill oval 2.3 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "cc1f23b8-0ffb-4ed5-bc80-0c7dda1d7df4") + (net 1 "/GND") + (uuid "d9a27ede-3898-58c2-97b2-140678ee6829") + ) + (pad "MP" thru_hole oval + (at -4.5 7 270) + (size 2 3.5) + (drill oval 1 2.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "6f34993f-b2d4-451c-82f0-2ba80ed4d83e") + (uuid "4971d2af-a646-594a-98a1-f956b4a663a1") + ) + (pad "MP" thru_hole oval + (at 4.5 7 270) + (size 2 3.5) + (drill oval 1 2.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "a15e4e26-333b-4c9b-803f-e0ff9f539c8c") + (uuid "4971d2af-a646-594a-98a1-f956b4a663a1") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_BarrelJack.3dshapes/BarrelJack_CUI_PJ-063AH_Horizontal.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/ed0ad194-4212-580e-b303-3998de02f3c1") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12" + (layer "F.Cu") + (uuid "2aff47df-92a6-5b73-bf51-ad8831069c34") + (at 103.4 144 270) + (property "LCSC" "C165948" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "34368228-3982-5a9b-8554-ed8ba656f589") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "USB Type-C receptacle for USB 2.0 and PD, http://www.krhro.com/uploads/soft/180320/1-1P320120243.pdf") + (tags "usb usb-c 2.0 pd") + (property "Reference" "J2" + (at 0 -5.645 0) + (layer "F.SilkS") + (uuid "a144ce76-cc23-44fb-8108-bf18e64a4c3d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "USB-C" + (at 0 5.1 0) + (layer "F.Fab") + (uuid "0ca5cf76-e951-4e58-a402-14dc42a864b3") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "2b954944-56ad-4032-bee5-bd7186324aef") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "9d55800b-f601-4afa-9fad-eee332310ae0") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -4.7 -1.9) + (end -4.7 0.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "9513b845-7495-41b4-99da-c8a12a5f4b76") + ) + (fp_line + (start -4.7 2) + (end -4.7 3.9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7abeef8d-db92-4e88-b3d6-7c7e4efa4938") + ) + (fp_line + (start -4.7 3.9) + (end 4.7 3.9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "f40329f5-4d09-479c-8f81-97fdcd13c5cd") + ) + (fp_line + (start 4.7 -1.9) + (end 4.7 0.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "177e7db1-b916-4e65-ace8-532e6e1f85db") + ) + (fp_line + (start 4.7 2) + (end 4.7 3.9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "bd122681-67e3-4c23-b564-57e345c7c818") + ) + (fp_line + (start -5.32 -5.27) + (end -5.32 4.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d939342c-cab3-429e-ad71-738d34173267") + ) + (fp_line + (start -5.32 -5.27) + (end 5.32 -5.27) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3215d7dd-650e-4c6a-86e5-bc970c8d9c6c") + ) + (fp_line + (start -5.32 4.15) + (end 5.32 4.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c38cb6a1-740b-49d2-b49e-f8ce3382fe48") + ) + (fp_line + (start 5.32 -5.27) + (end 5.32 4.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3b610068-7f90-495b-a772-9a6b7e6a55c9") + ) + (fp_line + (start -4.47 -3.65) + (end -4.47 3.65) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "47095738-bb75-4e91-802c-f92840c443b3") + ) + (fp_line + (start -4.47 -3.65) + (end 4.47 -3.65) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "6142486d-ba8a-4b38-a6ca-d52b6a020ef2") + ) + (fp_line + (start -4.47 3.65) + (end 4.47 3.65) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "84966fee-864e-4cdc-8345-c62bca33694f") + ) + (fp_line + (start 4.47 -3.65) + (end 4.47 3.65) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f6b3cf35-21be-4e1f-8c99-3404cfc41d3f") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "9189a13a-f353-4ddb-8257-370c54398cd0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at -2.89 -2.6 270) + (size 0.65 0.65) + (drill 0.65) + (layers "*.Cu" "*.Mask") + (uuid "e13b4b37-788a-41d5-87ca-c66be43ee32d") + (uuid "19850610-7e13-5570-8828-dded7554575f") + ) + (pad "" np_thru_hole circle + (at 2.89 -2.6 270) + (size 0.65 0.65) + (drill 0.65) + (layers "*.Cu" "*.Mask") + (uuid "4558f1f0-2fa3-46e1-a220-284fa2707bb5") + (uuid "19850610-7e13-5570-8828-dded7554575f") + ) + (pad "A1" smd rect + (at -3.25 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "245fae56-8b58-4bd8-bbf1-36624dc3fa3e") + (net 1 "/GND") + (uuid "d586faf6-af96-5cec-a2e4-2851e64d2d4e") + ) + (pad "A4" smd rect + (at -2.45 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "412cd3c1-0d89-4ca6-be0e-1b17d8471f5a") + (net 31 "/VBUS") + (uuid "5e2b5c5d-bf9f-5769-a68f-c012f0fc51d0") + ) + (pad "A5" smd rect + (at -1.25 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "93953890-acba-456b-bb6d-b1e79179ffa0") + (net 6 "/CC1") + (uuid "9a6a3bb6-8d4a-53af-b6fb-a2500c8d260d") + ) + (pad "A6" smd rect + (at -0.25 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "6a642da3-3122-4031-a6e9-68498b0f5bb9") + (net 30 "/USB_DP") + (uuid "832ca5f2-25a2-55fb-b178-f97b34e0a630") + ) + (pad "A7" smd rect + (at 0.25 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "01b9b129-063c-4bae-b620-9610006254cb") + (net 29 "/USB_DM") + (uuid "0dd352fc-7d6a-533f-a2cc-06d40c144009") + ) + (pad "A8" smd rect + (at 1.25 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "46ecdf8a-0917-4257-a388-b77e7451dc23") + (net 45 "unconnected-(J2-SBU1-PadA8)") + (uuid "1ee3d0f4-86b0-5817-812a-70d06da1c610") + ) + (pad "A9" smd rect + (at 2.45 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "a35f3da7-7460-43f1-99b7-9ed521817778") + (net 31 "/VBUS") + (uuid "6fb2d688-805d-54ef-b017-09a3c8ca41be") + ) + (pad "A12" smd rect + (at 3.25 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "3795b0f1-50f9-473e-9d26-381fc08b3c2d") + (net 1 "/GND") + (uuid "68f69939-6315-5b90-ba46-3f55d34009ba") + ) + (pad "B1" smd rect + (at 3.25 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c9e8a0db-2a60-41d9-b783-6c4e64a8fb5d") + (net 1 "/GND") + (uuid "76aaecd2-a682-5ab2-8df1-2a435dbbd004") + ) + (pad "B4" smd rect + (at 2.45 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "51b193ee-c8c2-4ee6-8d8c-14b79a2c1520") + (net 31 "/VBUS") + (uuid "43c066f5-8b28-57fa-81e9-6d0c4c021821") + ) + (pad "B5" smd rect + (at 1.75 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "45f8f791-f545-4341-9848-fb81a03703a6") + (net 7 "/CC2") + (uuid "ca44041f-288a-517b-ba9b-bd0a2abfb05f") + ) + (pad "B6" smd rect + (at 0.75 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "efc27675-62a0-44de-8210-29c2190dd309") + (net 30 "/USB_DP") + (uuid "350b135e-9b01-5a3f-a01d-25bb6527d892") + ) + (pad "B7" smd rect + (at -0.75 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "96622dcb-c1cc-4b7d-8455-8cd0ce1e5c34") + (net 29 "/USB_DM") + (uuid "61837419-9bb3-586b-bb59-b5050d715b0a") + ) + (pad "B8" smd rect + (at -1.75 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "09bb6e12-e7e5-4788-b43e-4cc6c50a557a") + (net 46 "unconnected-(J2-SBU2-PadB8)") + (uuid "53384acf-20ca-5dcf-80db-6328724f52ca") + ) + (pad "B9" smd rect + (at -2.45 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "70539c09-2020-4a42-a156-43d1513170d0") + (net 31 "/VBUS") + (uuid "f24026fb-0159-5620-b983-c9648befcc40") + ) + (pad "B12" smd rect + (at -3.25 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "eda87c04-3a59-4e2c-a9bd-f59ed31672aa") + (net 1 "/GND") + (uuid "a615c776-47ae-5576-aca6-2d29d11139d5") + ) + (pad "S1" thru_hole oval + (at -4.32 -3.13 270) + (size 1 2.1) + (drill oval 0.6 1.7) + (property pad_prop_heatsink) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "69c3dc88-a37e-49ef-ae4d-497d3191ad5b") + (net 1 "/GND") + (uuid "7d605899-303c-5f9b-bbdd-b615c228cb0e") + ) + (pad "S1" thru_hole oval + (at -4.32 1.05 270) + (size 1 1.6) + (drill oval 0.6 1.2) + (property pad_prop_heatsink) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "5991ca6f-c5c1-4692-8fe9-cf4b7ca50c4b") + (net 1 "/GND") + (uuid "7d605899-303c-5f9b-bbdd-b615c228cb0e") + ) + (pad "S1" thru_hole oval + (at 4.32 -3.13 270) + (size 1 2.1) + (drill oval 0.6 1.7) + (property pad_prop_heatsink) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "af5ae63f-ef36-487e-a6b8-831b84890f25") + (net 1 "/GND") + (uuid "7d605899-303c-5f9b-bbdd-b615c228cb0e") + ) + (pad "S1" thru_hole oval + (at 4.32 1.05 270) + (size 1 1.6) + (drill oval 0.6 1.2) + (property pad_prop_heatsink) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "e783dde5-f762-4528-9b55-9220820b0b1c") + (net 1 "/GND") + (uuid "7d605899-303c-5f9b-bbdd-b615c228cb0e") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_USB.3dshapes/USB_C_Receptacle_HRO_TYPE-C-31-M-12.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/8d1310f0-9128-5564-a14a-afbf40a99a6e") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "8dae16ba-0ad7-5b4c-bda1-e4ad19a6d6fb") + (at 104.5 103.4 270) + (property "LCSC" "C158012" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "432b8cf7-603f-5276-8a78-1a3ab8c7fd8b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J3" + (uuid "de7d54e2-8d61-52ed-9ddd-41e3bff184de") + (at 3.75 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "SPIN MOTOR" + (uuid "c6e69ccf-604a-5edb-ba7b-adae94e2bf09") + (at 3.75 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 3.75 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 9.3 -0.2) + (end 9.3 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 9.3 2.75) + (end 3.75 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 10.05 -0.2) + (end 9.3 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 10.06 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 6.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 8.25 -2.45) + (end 10.05 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 10.45 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 9.95 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 3.75 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 33 "/X_1A") + (uuid "d0598dd9-23b1-5f71-8786-69907d2ee190") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 34 "/X_1B") + (uuid "6f84fae8-5f82-58a5-871e-621423fad3f7") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 35 "/X_2A") + (uuid "c719095e-2585-5df9-882a-e943b8c5bacc") + ) + (pad "4" thru_hole oval + (at 7.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 36 "/X_2B") + (uuid "66a9a0a3-ba43-519e-9e0b-7b22aeff233e") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/708cf780-e089-5de2-8c0f-1543c42c32ca") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "45179826-373e-5067-a2ed-b9ec0691a7fd") + (at 176.5 103.4 270) + (property "LCSC" "C158012" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ab0ec991-30b1-576f-b14d-de6fd83a6ead") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J4" + (uuid "893a002e-cff7-5baf-b50e-3e8f749aa8e6") + (at 3.75 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "ARM MOTOR" + (uuid "9fdae7cd-8659-5d6e-8dc5-5969a6ccb97a") + (at 3.75 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 3.75 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 9.3 -0.2) + (end 9.3 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 9.3 2.75) + (end 3.75 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 10.05 -0.2) + (end 9.3 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 10.06 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 6.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 8.25 -2.45) + (end 10.05 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 10.45 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 9.95 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 3.75 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 39 "/Y_1A") + (uuid "6b123bc3-cd4c-5f8b-8632-58059a653ac2") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 40 "/Y_1B") + (uuid "e783f657-cf05-5af5-b1e2-600ee0d840d7") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 41 "/Y_2A") + (uuid "f2e151f8-f85d-5bef-bad1-537a30f692ed") + ) + (pad "4" thru_hole oval + (at 7.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 42 "/Y_2B") + (uuid "111cab74-be40-5c27-aace-7e7835913ffe") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/2b484b55-795c-57ba-9b9a-6be1442a758d") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "3b63aa94-0284-5d9e-b8cb-6c0b61230065") + (at 176.5 118.5 270) + (property "LCSC" "C144394" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "1fe2a19e-aa0a-5f99-8ba2-6586c0e16de1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J5" + (uuid "7d83eaa4-6d64-562c-8a4b-612e0b9bb0a5") + (at 2.5 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "HOME SW" + (uuid "d840964b-4c13-544c-9bf8-58b036038197") + (at 2.5 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 -0.2) + (end 6.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 7.55 -0.2) + (end 6.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 7.56 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 4.25 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 5.75 -2.45) + (end 7.55 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 7.95 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 7.45 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 2.5 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 3 "/+3V3") + (uuid "bb9b64a1-5b74-5433-b47e-9883f16be1a8") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 16 "/HOME_RAW") + (uuid "07bfa94b-40e8-5549-9860-ff3c514c26ad") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "08f26098-5885-581f-8530-c5b137293375") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/27bcc6d4-646d-5537-a603-df25b3cb5e89") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "a8a85f3d-4fd1-5d51-b5f4-7667b7825729") + (at 176.5 129.6 270) + (property "LCSC" "C144394" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "5cb613f6-b12a-530a-bfc0-07a4a26eb131") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J6" + (uuid "61176638-f716-5abc-aa21-0fa8245cb1e2") + (at 2.5 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "HALL" + (uuid "b5f5b44d-3fd0-505c-a32e-ae9f17670028") + (at 2.5 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 -0.2) + (end 6.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 7.55 -0.2) + (end 6.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 7.56 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 4.25 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 5.75 -2.45) + (end 7.55 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 7.95 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 7.45 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 2.5 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 4 "/+5V") + (uuid "f6fa1b8c-353e-51b0-abd1-30ea7afcbf7f") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "/HALL_RAW") + (uuid "c1166c02-4ac6-570f-91de-97b00450391e") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "aa1eda84-2d56-52d8-9bb1-821d58de9bc8") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/549450fb-f2e4-54be-b663-61640c1ecfed") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "133d31c3-5b26-5b9d-a19e-27ae5411f6b7") + (at 176.5 140.7 270) + (property "LCSC" "C144394" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8c7ce2e5-3504-542a-9748-ceae1e362683") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J7" + (uuid "46711e1d-aaaa-564b-8d70-c3b57526f209") + (at 2.5 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "LED STRIP" + (uuid "ba5ee8cb-b29d-5f11-ae56-1e51a4215ec4") + (at 2.5 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 -0.2) + (end 6.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 7.55 -0.2) + (end 6.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 7.56 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 4.25 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 5.75 -2.45) + (end 7.55 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 7.95 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 7.45 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 2.5 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 4 "/+5V") + (uuid "d4970e94-4312-595d-a3ae-beccfa62ac80") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 20 "/LED_DOUT") + (uuid "a1dc3499-89f5-5368-aed9-ec87431cc706") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "7fe99a87-7e92-592c-89b8-5a04fc6432a9") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/0c6ee88d-6318-51af-a4e4-f4a9504c7a87") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "73121754-5eac-5e07-a171-c0db16bc766f") + (at 177.5 152) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "74bacf16-cb94-5c1b-b060-45ff34a41282") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Through hole straight pin header, 1x04, 2.54mm pitch, single row") + (tags "Through hole pin header THT 1x04 2.54mm single row") + (property "Reference" "J8" + (uuid "b656204c-dcab-576e-bb16-b0313f763041") + (at 0 -2.38 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "EXPANSION" + (uuid "00015b8d-39f4-5548-b634-5213b84c2be0") + (at 0 10 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -1.38 -1.38) + (end 0 -1.38) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.38 0) + (end -1.38 -1.38) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.38 1.27) + (end -1.38 9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.38 1.27) + (end 1.38 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.38 9) + (end 1.38 9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 1.38 1.27) + (end 1.38 9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.77 -1.77) + (end 1.77 9.39) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -1.27 -0.635) + (end -0.635 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -1.27 8.89) + (end -1.27 -0.635) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.635 -1.27) + (end 1.27 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 1.27 -1.27) + (end 1.27 8.89) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 1.27 8.89) + (end -1.27 8.89) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 3.81 90) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.7 1.7) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "/+3V3") + (uuid "e5e1450a-1ccb-5c64-bea1-2bac4cbaeab6") + ) + (pad "2" thru_hole circle + (at 0 2.54) + (size 1.7 1.7) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 12 "/EXP_IO32") + (uuid "c7f97231-d286-5ceb-9285-05d244cb829d") + ) + (pad "3" thru_hole circle + (at 0 5.08) + (size 1.7 1.7) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 11 "/EXP_IO25") + (uuid "883cb7fb-6da7-50a2-9144-ac28ba132613") + ) + (pad "4" thru_hole circle + (at 0 7.62) + (size 1.7 1.7) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "08a7dfe9-3149-5c15-b49e-e4be824abeeb") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x04_P2.54mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/7150e8ae-22e2-5a66-8dc8-eedaf1fca13a") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT" + (layer "F.Cu") + (uuid "29356138-e9ed-5f32-a9c6-a604bf09e287") + (at 118 135) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "647f66ff-1bb0-5397-b638-218e9977be54") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "DCDC-Converter, RECOM, RECOM_R-78E-0.5, SIP-3, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Exx-0.5.pdf") + (tags "dc-dc recom buck sip-3 pitch 2.54mm") + (property "Reference" "PS1" + (uuid "1d47199e-7378-5dcf-a059-a735ab9776f3") + (at 2.54 -7.56 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "R-78E5.0-0.5" + (uuid "50a5902f-b25c-52ed-8652-e70e94f2d1ed") + (at 2.54 3 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -3.61 1.06) + (end -3.61 2.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.61 2.3) + (end -2.37 2.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.37 -6.56) + (end 8.35 -6.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.37 2.06) + (end -3.37 -6.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 8.35 -6.56) + (end 8.35 2.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 8.35 2.06) + (end -3.37 2.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -3.57 -6.75) + (end 8.54 2.25) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -3.31 -6.5) + (end 8.29 -6.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.31 1) + (end -3.31 -6.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -2.31 2) + (end -3.31 1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 8.29 -6.5) + (end 8.29 2) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 8.29 2) + (end -2.31 2) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 2.54 -2.25 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.5 2.3) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 2 "/+12V") + (uuid "3d606cca-6dc4-5808-8454-9f70af970cdb") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.5 2.3) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "7751201a-b024-59b0-8434-77af77bee7c0") + ) + (pad "3" thru_hole oval + (at 5.08 0) + (size 1.5 2.3) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 5 "/+5V_REG") + (uuid "92445cfa-b094-5e86-a1d5-8be0f1e7fd53") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Converter_DCDC.3dshapes/Converter_DCDC_RECOM_R-78E-0.5_THT.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/eca5d989-b3a9-5315-923f-dbc7574ff14d") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-23" + (layer "F.Cu") + (uuid "34bdfe8e-a0e9-5e6a-b751-8e9a0c7f1e1f") + (at 128 147.2) + (property "LCSC" "C20526" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8e27e0be-88a0-59b1-9af1-d7b66056a1a2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOT TO_SOT_SMD") + (property "Reference" "Q1" + (uuid "4da47c95-c5c5-5568-a9e7-fb2543ac1411") + (at 0 -2.4 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "MMBT3904" + (uuid "2cd83c77-0596-58fb-acc5-25ab58126947") + (at 0 2.4 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.76 -1.56) + (end 0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 -1.51) + (end -0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 0.39) + (end -0.76 -0.39) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 1.56) + (end -0.76 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 -1.56) + (end 0.76 -0.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 0.56) + (end 0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 1.56) + (end -0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -1.3 -0.38) + (xy -1.06 -0.05) + (xy -1.54 -0.05) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -1.93 -1.5) + (end -0.9 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 -0.39) + (end -1.93 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 0.39) + (end -0.9 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 1.5) + (end -1.93 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -1.7) + (end 0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -1.5) + (end -0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -0.39) + (end -1.93 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 0.39) + (end -0.9 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 1.5) + (end -1.93 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 1.7) + (end -0.9 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 -1.7) + (end 0.9 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 -0.55) + (end 1.93 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 0.55) + (end 0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 1.7) + (end -0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.93 -0.55) + (end 1.93 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.93 0.55) + (end 0.9 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.325 -1.45) + (xy 0.65 -1.45) + (xy 0.65 1.45) + (xy -0.65 1.45) + (xy -0.65 -1.125) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 0.72 0.72) + (thickness 0.11) + ) + ) + ) + (pad "1" smd roundrect + (at -0.9375 -0.95) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 22 "/Q1B") + (uuid "cdf3fbb0-0a8b-5317-8a80-a63ea325d264") + ) + (pad "2" smd roundrect + (at -0.9375 0.95) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 24 "/RTS") + (uuid "c79263d6-0cd0-52cc-b992-60eae93c08c0") + ) + (pad "3" smd roundrect + (at 0.9375 0) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 10 "/EN") + (uuid "0f177608-1531-5ba3-bd4f-eb3f32bc1e39") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/11349a74-c0a9-5c21-82e3-92fca14936f5") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-23" + (layer "F.Cu") + (uuid "a4d80dcc-bf5b-5632-b200-f4e42faf88d7") + (at 128 151.2) + (property "LCSC" "C20526" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "cd18e13a-34dd-5899-8d93-d8eaa3e9e7a6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOT TO_SOT_SMD") + (property "Reference" "Q2" + (uuid "b6077846-8e91-5001-9240-7e261c7c3522") + (at 0 -2.4 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "MMBT3904" + (uuid "fa19dae3-f88e-5b01-9113-2cef709010e9") + (at 0 2.4 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.76 -1.56) + (end 0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 -1.51) + (end -0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 0.39) + (end -0.76 -0.39) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 1.56) + (end -0.76 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 -1.56) + (end 0.76 -0.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 0.56) + (end 0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 1.56) + (end -0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -1.3 -0.38) + (xy -1.06 -0.05) + (xy -1.54 -0.05) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -1.93 -1.5) + (end -0.9 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 -0.39) + (end -1.93 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 0.39) + (end -0.9 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 1.5) + (end -1.93 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -1.7) + (end 0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -1.5) + (end -0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -0.39) + (end -1.93 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 0.39) + (end -0.9 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 1.5) + (end -1.93 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 1.7) + (end -0.9 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 -1.7) + (end 0.9 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 -0.55) + (end 1.93 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 0.55) + (end 0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 1.7) + (end -0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.93 -0.55) + (end 1.93 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.93 0.55) + (end 0.9 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.325 -1.45) + (xy 0.65 -1.45) + (xy 0.65 1.45) + (xy -0.65 1.45) + (xy -0.65 -1.125) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 0.72 0.72) + (thickness 0.11) + ) + ) + ) + (pad "1" smd roundrect + (at -0.9375 -0.95) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 23 "/Q2B") + (uuid "721d7176-a2fe-50fe-8967-f11b5c1a5572") + ) + (pad "2" smd roundrect + (at -0.9375 0.95) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 9 "/DTR") + (uuid "7a51e99a-e16d-56a4-9ac3-60709e067772") + ) + (pad "3" smd roundrect + (at 0.9375 0) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 17 "/IO0") + (uuid "02ecfe46-9e36-5139-9793-82fc687d66b5") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/226d855a-ed97-50e3-bc21-c9b8747baaf3") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "31f77d2f-5925-50f7-99fa-b6b83dfe8095") + (at 111.5 142.75) + (property "LCSC" "C23186" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "255441aa-93ce-55bf-9e6b-98362a174322") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R1" + (uuid "623948ed-4702-5b31-8736-08d3bcc2edd5") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "5.1k" + (uuid "94273dc2-064f-538c-a86a-80552f631af9") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 6 "/CC1") + (uuid "3ad671fb-2416-5273-98eb-54ddae0ab312") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "95fdb2c8-5a34-5602-98ed-86ceeb5cb627") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/a680cbe7-0f52-58fe-8242-a4cefcb892f1") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "5389057c-e6e0-5181-88e2-5b6dd438ad0a") + (at 157.5 118.5) + (property "LCSC" "C21190" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d055c20f-7adc-5dc7-9d54-e2ae03eb66f4") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R10" + (uuid "1e686ddc-8ade-56bd-b8f3-50126cb71746") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1k" + (uuid "8e1b1d35-798f-58c7-b763-08dd21d8177e") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 16 "/HOME_RAW") + (uuid "40b65474-2539-5246-bbcd-74ffcac2d93a") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 15 "/HOME") + (uuid "11a60641-9723-5eec-b754-be7d4da87bba") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/02b12c82-22e5-5040-b1cb-4f3d13b2e0a0") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "9eabd520-c397-5058-9ef1-93bf8a0c1ef6") + (at 154 120.7) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "aac6a386-1233-5f2c-ad39-bf6236fe6ead") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R11" + (uuid "7916b476-3264-5cb3-b564-0c4fafa509ef") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "4f5ad9f5-8557-505d-aeda-d7e234725cf1") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "fdb9bacb-b3ac-5e96-847f-fbbbb552a1c9") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 14 "/HALL_RAW") + (uuid "f76803c5-9f1f-5e2c-94af-ef96f546af65") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/57f73b68-632a-5478-b7a9-f190be911688") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "1b0679b0-ed44-5107-9345-e6632ad30960") + (at 157.5 120.7) + (property "LCSC" "C21190" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "012a06df-b1a3-5251-b0a9-6a2320b7e100") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R12" + (uuid "ff3fd57e-6e13-5caf-ae23-c7710e921da5") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1k" + (uuid "f591fb6a-28a7-57fe-b26e-6c83a90e91fd") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 14 "/HALL_RAW") + (uuid "4ad0848f-e927-58c8-9d23-8f950e2029e2") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 13 "/HALL") + (uuid "648531c4-ee8b-5790-9afd-740fb564df95") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/11806a6c-034b-55ce-9de9-903f7b99340b") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "62436e35-4a39-5d49-8f93-b73c7f6743de") + (at 170 130 90) + (property "LCSC" "C23138" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "67102eab-d27a-5ccd-9d56-5b1f4878cb76") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R13" + (uuid "1c9fe050-81bc-5809-ae29-1a519d641aab") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "330" + (uuid "a047e441-51b7-5d5a-a90c-f5b04b962d34") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 18 "/LED_BUF") + (uuid "babc0edc-5c07-5aea-bb75-ef6ef8da85c1") + ) + (pad "2" smd roundrect + (at 0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 20 "/LED_DOUT") + (uuid "31753a54-0225-52cc-84ba-29bbaa413160") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/46f59bf6-29cd-5c57-95e3-89e686cca6aa") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "e454e7d4-65b1-5f14-b458-ba3048273527") + (at 134 132.5) + (property "LCSC" "C21190" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7f6209ca-3d56-5e92-af84-dfd6c0a55954") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R14" + (uuid "9d784fec-f038-5eaa-aa96-592e3f5861e4") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1k" + (uuid "20f94cf6-b64f-52ec-9095-8ee0b4fb865c") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "8e2e1928-857a-5de2-9fcf-fe91fc8d28ec") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 21 "/PWR_A") + (uuid "50b8c924-9024-5412-9c3c-92bcdc445c91") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/ce7d6208-8a8a-5871-96f1-a5eff454d35c") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "32d02b52-ad0c-5ae6-af33-66768cc3cf36") + (at 138 132.5) + (property "LCSC" "C21190" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "9cdc0605-8307-5880-8d45-7ea8b4553884") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R15" + (uuid "ed59504c-6140-57a0-bb3f-470163dface5") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1k" + (uuid "ff94b75b-794a-5ef6-9ac6-749a4c70be73") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 25 "/STAT") + (uuid "09e2e114-0be3-530d-ae2d-b5fa9dad66f7") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 26 "/STAT_A") + (uuid "035d4073-b194-502b-a027-e4d4bc06c659") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/72f891f8-ee6d-51f4-8966-7c74fc42716c") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "9d8a48db-6e15-5488-b3eb-ba310a50cb21") + (at 111.5 145.75) + (property "LCSC" "C23186" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "69d1604d-9f45-5bf6-be37-0ee7153af940") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R2" + (uuid "931bfd84-aa39-5cac-b42a-61b0eb2e9f44") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "5.1k" + (uuid "1e8b7314-01c7-51e4-89f4-eb4d8353eb80") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 7 "/CC2") + (uuid "febe8c24-b931-5b59-85a2-5bcc3ed882fe") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "3ea1e64b-358e-540d-a882-e06a00a37e6e") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/11b33b9a-df3c-580c-9410-8bcb87c6b59b") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "a37a44a2-b6db-5041-b6e0-326625b0ec4c") + (at 131 145 90) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "a397232d-020c-54f3-967c-878125ae5b86") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R3" + (uuid "f509c334-f860-5935-9aa2-701804cfb78c") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "3bbbe9ee-b77b-507d-8221-b4f128182ea6") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 9 "/DTR") + (uuid "aa861747-3afc-5976-ab6e-0c80ba581d38") + ) + (pad "2" smd roundrect + (at 0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 22 "/Q1B") + (uuid "a0b1c448-27d9-56a8-a1c6-8e601cc25dd4") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/361b6a0c-fdf3-5366-a925-bc3597a8da31") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "ed31670d-5596-5cfe-9ef0-7ff4917680bc") + (at 131 149.5 90) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "baa86c78-8539-5e56-b77e-ab237938ef69") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R4" + (uuid "588f010b-814d-5bee-aa8d-a3a9c8954eed") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "dc2251a6-8547-5524-9387-7913ff183c6c") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 24 "/RTS") + (uuid "99c3aec6-d09d-549a-bd0f-422411434298") + ) + (pad "2" smd roundrect + (at 0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 23 "/Q2B") + (uuid "82afd907-a040-5bfc-9b75-7dd26da6c081") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/95f8ea31-0e5c-5e0f-b4ba-423b07f1ac7c") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "bc823e07-2139-553b-85ca-1de61ecf04c1") + (at 154.6 151) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0afb7d8c-603e-51d6-b698-ac7e1237c966") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R5" + (uuid "81de89b1-470f-50eb-853d-11a0e4f79115") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "0723ce1f-3b3f-57d3-a995-b9ed50d4dccd") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "13d9c074-2287-5ffd-b5a1-eb6974d86140") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 10 "/EN") + (uuid "b2fe5097-0a40-5beb-8bce-3c53f89768e1") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/f0f4b15c-5bad-5c9c-a667-bcf9f833f827") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "e38df896-740b-5a19-8b7f-33e3d2e4b5e8") + (at 131 137.5) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bcdcbb19-f995-5192-973a-15023ac0ca2e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R6" + (uuid "69755257-67a7-55c7-8eff-8dc612fce46d") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "e0b55d9c-a71e-5b13-aec2-4aee74a6fd67") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "73a4f1f0-168d-5b94-aad1-22615a1a8d78") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 17 "/IO0") + (uuid "b4ef2521-3cfe-5472-817c-72d688430c10") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/b767d7de-5928-5314-aed0-83763e967099") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "e41c2099-2342-500f-a03a-3d353eddc4bc") + (at 147 131) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "43962992-b03d-5e49-9f44-499d6331d0ff") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R8" + (uuid "ed285754-5471-5aa9-b2e2-6c11acf134bd") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "f7cc06ed-c5cd-5f1e-96d8-d17291f319ba") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "37471679-ffc2-5544-a1dd-d49e61687521") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 8 "/DRV_EN") + (uuid "a92cd469-535b-5dae-97b1-a3b07e3090e4") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/87628e3d-d60f-5ba2-90a9-e8571c1cee3f") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "3def5c93-8fc4-5fd8-a74d-1d962d932a10") + (at 154 118.5) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8b8c4a48-80a3-5c43-8542-232a01a0bf8d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R9" + (uuid "f2ab1921-b09c-53b0-bee6-fdd166d192c5") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "b03680e4-d139-5a9b-9f44-a4fef08382a4") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "507a6bc6-47c9-56ee-ad12-4d3dfc759dfe") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 16 "/HOME_RAW") + (uuid "5597b640-3e52-5b6f-9555-f4d59c70a160") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/fdca50db-642f-568f-ac2f-0a3fcf029fb9") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Button_Switch_SMD:SW_SPST_B3U-1000P" + (layer "F.Cu") + (uuid "07f46896-b81d-58fc-8c09-04e8881657a6") + (at 127.5 155) + (property "LCSC" "C231329" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "5ffe2ab1-0ee0-51dd-a5a2-d8577845f68c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, without Boss") + (tags "Tactile Switch") + (property "Reference" "SW1" + (at 0 -2.5 0) + (layer "F.SilkS") + (uuid "e56ff9ca-74d7-4aa3-8111-533a5ee32933") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "RESET" + (at 0 2.5 0) + (layer "F.Fab") + (uuid "a786f27e-1ab5-47e2-b000-faa5fc44f3aa") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "8c197b0c-cea6-4c47-a225-322399bfaee3") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "e0ba27b1-1f99-49b5-8a9c-5cf571a9795c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.65 -1.4) + (end 1.65 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0e11df53-f8ee-43ce-93b4-3c90d3d22c5c") + ) + (fp_line + (start -1.65 -1.1) + (end -1.65 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "75f2296d-b0af-40b7-a7ae-3583b9f751e7") + ) + (fp_line + (start -1.65 1.1) + (end -1.65 1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7606794f-94b1-4b7c-9aab-06201525eb9b") + ) + (fp_line + (start -1.65 1.4) + (end 1.65 1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "5616da4a-8ed8-4011-921b-cd43949918e7") + ) + (fp_line + (start 1.65 -1.4) + (end 1.65 -1.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "705a451f-c08f-4aa5-aa9c-8fcf274e5428") + ) + (fp_line + (start 1.65 1.4) + (end 1.65 1.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b43c1010-b7f4-4abc-8ebc-c2e4f2484a6f") + ) + (fp_line + (start -2.4 -1.65) + (end -2.4 1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7833e4a1-0304-4444-8f84-b8edbf518fcf") + ) + (fp_line + (start -2.4 1.65) + (end 2.4 1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2581f53c-f7e0-40b8-8870-3a4da1d2dbc0") + ) + (fp_line + (start 2.4 -1.65) + (end -2.4 -1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "79cb4ec8-1000-4659-bc94-d06d6d6efe6e") + ) + (fp_line + (start 2.4 1.65) + (end 2.4 -1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f5c54de1-e2a8-4db1-94ec-36f52a2b3bf5") + ) + (fp_line + (start -1.5 -1.25) + (end 1.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0a332110-eeed-4bb6-87c5-62011a75ac14") + ) + (fp_line + (start -1.5 1.25) + (end -1.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3de81bd5-2500-4819-bd11-f02b4544c28b") + ) + (fp_line + (start 1.5 -1.25) + (end 1.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7566e90f-6899-4152-9345-77c96692f19f") + ) + (fp_line + (start 1.5 1.25) + (end -1.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b8fe5f89-c5d9-4130-b4a4-4f66c371753d") + ) + (fp_circle + (center 0 0) + (end 0.75 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "950f98fb-a768-43cf-957b-3a4fad696344") + ) + (fp_text user "${REFERENCE}" + (at 0 -2.5 0) + (layer "F.Fab") + (uuid "b618111c-4d85-41dc-be76-621aed6ccefc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd rect + (at -1.7 0) + (size 0.9 1.7) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "f5178655-4ae4-4e7c-b5bb-a79d990d08a6") + (net 10 "/EN") + (uuid "ab58c045-1b32-5f80-9cb8-ee444bb0b679") + ) + (pad "2" smd rect + (at 1.7 0) + (size 0.9 1.7) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "6f994d3d-2800-47d5-b256-665b170cf7f7") + (net 1 "/GND") + (uuid "a52764e4-092e-58e0-aaef-2827076b90bd") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_B3U-1000P.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/1abe3ec4-5aa3-51bb-b2c6-96932b03128b") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Button_Switch_SMD:SW_SPST_B3U-1000P" + (layer "F.Cu") + (uuid "67a147ab-579b-586d-b9c7-1179e6435170") + (at 122 155) + (property "LCSC" "C231329" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "369f956b-ddd5-57d3-b664-fe1e8d8bbc2f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, without Boss") + (tags "Tactile Switch") + (property "Reference" "SW2" + (at 0 -2.5 0) + (layer "F.SilkS") + (uuid "e56ff9ca-74d7-4aa3-8111-533a5ee32933") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "BOOT" + (at 0 2.5 0) + (layer "F.Fab") + (uuid "a786f27e-1ab5-47e2-b000-faa5fc44f3aa") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "8c197b0c-cea6-4c47-a225-322399bfaee3") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "e0ba27b1-1f99-49b5-8a9c-5cf571a9795c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.65 -1.4) + (end 1.65 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0e11df53-f8ee-43ce-93b4-3c90d3d22c5c") + ) + (fp_line + (start -1.65 -1.1) + (end -1.65 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "75f2296d-b0af-40b7-a7ae-3583b9f751e7") + ) + (fp_line + (start -1.65 1.1) + (end -1.65 1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7606794f-94b1-4b7c-9aab-06201525eb9b") + ) + (fp_line + (start -1.65 1.4) + (end 1.65 1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "5616da4a-8ed8-4011-921b-cd43949918e7") + ) + (fp_line + (start 1.65 -1.4) + (end 1.65 -1.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "705a451f-c08f-4aa5-aa9c-8fcf274e5428") + ) + (fp_line + (start 1.65 1.4) + (end 1.65 1.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b43c1010-b7f4-4abc-8ebc-c2e4f2484a6f") + ) + (fp_line + (start -2.4 -1.65) + (end -2.4 1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7833e4a1-0304-4444-8f84-b8edbf518fcf") + ) + (fp_line + (start -2.4 1.65) + (end 2.4 1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2581f53c-f7e0-40b8-8870-3a4da1d2dbc0") + ) + (fp_line + (start 2.4 -1.65) + (end -2.4 -1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "79cb4ec8-1000-4659-bc94-d06d6d6efe6e") + ) + (fp_line + (start 2.4 1.65) + (end 2.4 -1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f5c54de1-e2a8-4db1-94ec-36f52a2b3bf5") + ) + (fp_line + (start -1.5 -1.25) + (end 1.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0a332110-eeed-4bb6-87c5-62011a75ac14") + ) + (fp_line + (start -1.5 1.25) + (end -1.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3de81bd5-2500-4819-bd11-f02b4544c28b") + ) + (fp_line + (start 1.5 -1.25) + (end 1.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7566e90f-6899-4152-9345-77c96692f19f") + ) + (fp_line + (start 1.5 1.25) + (end -1.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b8fe5f89-c5d9-4130-b4a4-4f66c371753d") + ) + (fp_circle + (center 0 0) + (end 0.75 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "950f98fb-a768-43cf-957b-3a4fad696344") + ) + (fp_text user "${REFERENCE}" + (at 0 -2.5 0) + (layer "F.Fab") + (uuid "b618111c-4d85-41dc-be76-621aed6ccefc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd rect + (at -1.7 0) + (size 0.9 1.7) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "f5178655-4ae4-4e7c-b5bb-a79d990d08a6") + (net 17 "/IO0") + (uuid "6ab349a1-3ec3-5acc-a980-9a7140c485bb") + ) + (pad "2" smd rect + (at 1.7 0) + (size 0.9 1.7) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "6f994d3d-2800-47d5-b256-665b170cf7f7") + (net 1 "/GND") + (uuid "8091d330-2b6e-58bc-8c56-35b1e61026fb") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_B3U-1000P.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/5cf58b67-333f-5e2a-893e-34255fef1ee7") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "RF_Module:ESP32-WROOM-32E" + (layer "F.Cu") + (uuid "4c7ad107-676c-5d3d-be5c-bc1c308946b4") + (at 143 150.59 180) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ad52f188-11b7-5819-bef7-0090923fad89") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "2.4 GHz Wi­-Fi and Bluetooth 5 (LE) module: https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf") + (tags "Bluetooth WiFi Wi-Fi ESP32 WROOM Xtensa LX6") + (property "Reference" "U1" + (at -10.5 13.5 0) + (layer "F.SilkS") + (uuid "6061ecd3-0cf8-4046-9ce3-82ecb6993515") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify left) + ) + ) + (property "Value" "ESP32-WROOM-32E-N8" + (at 0 14.5 0) + (layer "F.Fab") + (uuid "baab5e21-f062-46e2-be45-b446bf5b894c") + (effects + (font + (size 0.9 0.9) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "f420f95b-1617-46ac-9746-a9dbd9f31bd5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "5cfdf0aa-8858-4a1c-bb26-68cf6f79703b") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -9.2 12.95) + (end -9.2 12) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "a4b669ee-9518-4f2f-bfdc-03148cc2b4fd") + ) + (fp_line + (start -7.8 12.95) + (end -9.2 12.95) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "096aeaa0-c10f-4f21-828c-e4348cf8a588") + ) + (fp_line + (start 7.8 12.95) + (end 9.2 12.95) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "eecac9da-c07f-413d-aed4-9abe8346f038") + ) + (fp_line + (start 9.2 12.95) + (end 9.2 12) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "4707d851-649e-4387-919b-53dc34fe39f0") + ) + (fp_poly + (pts + (xy -9.2 -6) + (xy -9.7 -6) + (xy -9.2 -6.5) + (xy -9.2 -6) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + (uuid "c1eb111e-b8ac-4c8f-9a03-9fe757631ec7") + ) + (fp_poly + (pts + (xy -24.25 -28) + (xy 24.25 -28) + (xy 24.25 -6.31) + (xy 9.75 -6.31) + (xy 9.75 13.54) + (xy -9.75 13.54) + (xy -9.75 -6.31) + (xy -24.25 -6.31) + ) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "8268eeb2-ce71-4802-8031-b3df26ba0a06") + ) + (fp_line + (start -9 -12.75) + (end 9 -12.75) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3a9f88c5-c3ce-4470-a940-4ca3add49d80") + ) + (fp_line + (start -9 -6.56) + (end -9 -12.75) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "a54b9094-38e0-4d2c-a567-4d0bdb61e2db") + ) + (fp_line + (start 9 -12.75) + (end 9 -6.56) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "8b370f59-36f6-438e-83c5-3bed3ef74482") + ) + (fp_rect + (start -9 -6.56) + (end 9 12.75) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "6d2613c8-2be8-4d41-809d-52158ba110a1") + ) + (fp_poly + (pts + (xy -5 -9.75) + (xy -3 -9.75) + (xy -3 -12.25) + (xy 0 -12.25) + (xy 0 -9.75) + (xy 2 -9.75) + (xy 2 -12.25) + (xy 7.5 -12.25) + (xy 7.5 -6.75) + (xy 7 -6.75) + (xy 7 -11.75) + (xy 5 -11.75) + (xy 5 -6.75) + (xy 4.5 -6.75) + (xy 4.5 -11.75) + (xy 2.5 -11.75) + (xy 2.5 -9.25) + (xy -0.5 -9.25) + (xy -0.5 -11.75) + (xy -2.5 -11.75) + (xy -2.5 -9.25) + (xy -5.5 -9.25) + (xy -5.5 -11.75) + (xy -7.5 -11.75) + (xy -7.5 -8.25) + (xy -8 -8.25) + (xy -8 -12.25) + (xy -5 -12.25) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill yes) + (layer "F.Fab") + (uuid "2321df2f-9a58-433d-a5e7-84e7c5c56a3a") + ) + (fp_text user "${REFERENCE}" + (at 0 -1 0) + (layer "F.Fab") + (uuid "263ff581-2132-48f1-8b01-0ccace8bfbba") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd rect + (at -8.75 -5.26 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "1bd7944f-be9d-451a-aa42-3967010b7c19") + (net 1 "/GND") + (uuid "171713fe-d428-54b6-8844-ee33aef09378") + ) + (pad "2" smd rect + (at -8.75 -3.99 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "00117d8e-0e8d-444b-a1f3-f4978d47d9b3") + (net 3 "/+3V3") + (uuid "4a7568bb-4a8f-5dd7-8493-736a08b46cdb") + ) + (pad "3" smd rect + (at -8.75 -2.72 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "91ca2eda-da62-4e31-b5ef-380eeadd5000") + (net 10 "/EN") + (uuid "0bee4d95-2ae2-5969-894b-95c63ac7234e") + ) + (pad "4" smd rect + (at -8.75 -1.45 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "2686b64b-b117-4477-93b4-ce60fdcd9cc5") + (net 65 "unconnected-(U1-SENSOR_VP-Pad4)") + (uuid "94208bda-d988-5868-9df6-b9809d439e6e") + ) + (pad "5" smd rect + (at -8.75 -0.18 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "794e3ab7-bd2d-44e8-86f4-4cb341674aa9") + (net 64 "unconnected-(U1-SENSOR_VN-Pad5)") + (uuid "664270b6-5432-5edf-aff8-22e2a61603ce") + ) + (pad "6" smd rect + (at -8.75 1.09 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c9cd98db-7e4d-40a5-8665-084a8c17d2ba") + (net 15 "/HOME") + (uuid "2821827c-6c44-5b23-9daf-5d0c8d7bc88b") + ) + (pad "7" smd rect + (at -8.75 2.36 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "0ae96d54-8e1d-4b64-a8af-e9c017ed7421") + (net 13 "/HALL") + (uuid "108f6fc8-b360-58cc-a6b3-58b639b75a75") + ) + (pad "8" smd rect + (at -8.75 3.63 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "1ca0da5b-186e-4c73-9e08-80816cd57c3e") + (net 12 "/EXP_IO32") + (uuid "3a6a54ec-1b26-5664-86a6-d62a03ccac4e") + ) + (pad "9" smd rect + (at -8.75 4.9 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "9cafe792-c1f7-4977-b804-edb98a3a182b") + (net 19 "/LED_DATA") + (uuid "7c5b6425-4043-5338-b17d-2cde6272742d") + ) + (pad "10" smd rect + (at -8.75 6.17 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "e61148d5-71cf-4624-90e2-ff3dbad1b9e1") + (net 11 "/EXP_IO25") + (uuid "1e2d7a2f-ff8d-5364-ae5c-ec22661583d4") + ) + (pad "11" smd rect + (at -8.75 7.44 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "04db5ea8-45c7-4ac8-980e-cfac02b827e8") + (net 54 "unconnected-(U1-IO26-Pad11)") + (uuid "fc23ce3f-ae42-5e7d-92e1-25b40e8c790f") + ) + (pad "12" smd rect + (at -8.75 8.71 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "58a3c98d-76e8-4c99-a8ce-0d6d75cc8c7c") + (net 44 "/Y_STEP") + (uuid "0d9f84af-b60c-5ab4-9a67-3d5425767aac") + ) + (pad "13" smd rect + (at -8.75 9.98 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "7e5ce69e-18e7-4931-bb46-7c9dc6e0e941") + (net 43 "/Y_DIR") + (uuid "fe3470ce-e115-57bf-abae-cfee2763c75f") + ) + (pad "14" smd rect + (at -8.75 11.25 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "3cd7ed2b-c450-450e-936e-7c0f0e734b4d") + (net 47 "unconnected-(U1-IO12-Pad14)") + (uuid "0a1c5e5b-bedd-5b3e-8b08-b6cee475814f") + ) + (pad "15" smd rect + (at -5.715 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "09ac19f1-8843-473a-8db7-f17f798d1427") + (net 1 "/GND") + (uuid "00da8d49-ffa1-5f29-a84b-60dd201ae543") + ) + (pad "16" smd rect + (at -4.445 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c3a85e10-30b8-4774-b039-1ce64878785f") + (net 8 "/DRV_EN") + (uuid "52837b74-f989-5208-a5ce-a6a3df7d8105") + ) + (pad "17" smd rect + (at -3.175 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "7f185524-599a-42ad-bc27-e369217d213b") + (net 57 "unconnected-(U1-NC-Pad17)") + (uuid "2fefcb83-ddd9-5d5a-8349-60905d38a1fb") + ) + (pad "18" smd rect + (at -1.905 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "214e7d56-0045-4455-9f46-6b2f57a41cd3") + (net 58 "unconnected-(U1-NC-Pad18)") + (uuid "b5885202-50b2-5f50-bfa8-f65fa70a26b6") + ) + (pad "19" smd rect + (at -0.635 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "12741a6e-4604-43e7-ab0a-6421b6ae053f") + (net 59 "unconnected-(U1-NC-Pad19)") + (uuid "b30e0925-8ca7-54f1-87e0-da050cf51942") + ) + (pad "20" smd rect + (at 0.635 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "84adfd0c-f05c-4154-b92b-0680dc137f7d") + (net 60 "unconnected-(U1-NC-Pad20)") + (uuid "e0e5cae4-7e32-5231-b7c8-8efca531f619") + ) + (pad "21" smd rect + (at 1.905 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "ffda12c1-9487-4b14-8d72-661b48c27e1b") + (net 61 "unconnected-(U1-NC-Pad21)") + (uuid "58d8f263-d1f1-5fc1-aed5-e4241fc5692c") + ) + (pad "22" smd rect + (at 3.175 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "1966bc1d-685b-4227-b62d-6466fa415482") + (net 62 "unconnected-(U1-NC-Pad22)") + (uuid "f3c60052-5977-5010-9e48-e34e301b7aac") + ) + (pad "23" smd rect + (at 4.445 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "f211a9cb-7289-4d78-b282-cf7821210735") + (net 48 "unconnected-(U1-IO15-Pad23)") + (uuid "2dbd0d6b-951b-5aac-ad37-493222a6f16a") + ) + (pad "24" smd rect + (at 5.715 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "ad9e9b5c-a1a3-45f4-a01f-5e77c3f309a3") + (net 25 "/STAT") + (uuid "2f7c9c7c-1bf0-5b58-821e-98bc854fccda") + ) + (pad "25" smd rect + (at 8.75 11.25 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "3258a05b-ce27-4d91-b8c2-261e029b1392") + (net 17 "/IO0") + (uuid "5253379d-a847-5df5-8170-43d37b168e3f") + ) + (pad "26" smd rect + (at 8.75 9.98 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c624fb84-f402-4a8e-b962-ba20aa89de98") + (net 55 "unconnected-(U1-IO4-Pad26)") + (uuid "a58e49bc-5483-50a3-bcd4-507ab438d5a3") + ) + (pad "27" smd rect + (at 8.75 8.71 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c92753be-49ac-455f-aa5d-13fd26901862") + (net 49 "unconnected-(U1-IO16-Pad27)") + (uuid "2cd97fe4-84cc-52b6-bd08-80287befaf47") + ) + (pad "28" smd rect + (at 8.75 7.44 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "ccc41bc7-3d13-4b70-b3b4-c7cec91e3b45") + (net 50 "unconnected-(U1-IO17-Pad28)") + (uuid "94dda3f9-1e1b-596e-b637-c631d532cd9e") + ) + (pad "29" smd rect + (at 8.75 6.17 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "e4d0f92e-c25a-4ff4-b1fb-7251025c4967") + (net 56 "unconnected-(U1-IO5-Pad29)") + (uuid "78b311e8-3dfe-5d04-837a-dfef7e012c56") + ) + (pad "30" smd rect + (at 8.75 4.9 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "895699e9-3c04-445a-b169-a7e578af16e2") + (net 38 "/X_STEP") + (uuid "98fed87d-1a29-503c-a76c-ffcd20b78dac") + ) + (pad "31" smd rect + (at 8.75 3.63 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "208f540b-63e2-4482-b989-1c21ef6541ed") + (net 37 "/X_DIR") + (uuid "df497679-4d22-58d0-aad9-750c37b20d3d") + ) + (pad "32" smd rect + (at 8.75 2.36 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "4cb5aeb8-5597-433f-b523-e9eb0ce4b74f") + (net 63 "unconnected-(U1-NC-Pad32)") + (uuid "df89dc1b-a3ff-5e92-bdb7-1cba5362bbe2") + ) + (pad "33" smd rect + (at 8.75 1.09 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "4030bb27-6bab-4b3b-9dc4-8147cff47580") + (net 51 "unconnected-(U1-IO21-Pad33)") + (uuid "c44c51f7-08c8-5aae-b0a0-5f854eadf1d5") + ) + (pad "34" smd rect + (at 8.75 -0.18 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "3c2dfa5b-bca7-485d-8ac2-0490caf8f423") + (net 27 "/U0RXD") + (uuid "dbefdcd0-61ab-5e01-83ec-c91d2d72403d") + ) + (pad "35" smd rect + (at 8.75 -1.45 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "944e43b2-2724-43b5-a4e9-cb4bfabcca01") + (net 28 "/U0TXD") + (uuid "7b74701a-eb83-57b8-ac32-6deaedfc2dec") + ) + (pad "36" smd rect + (at 8.75 -2.72 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "aea91c2b-5619-4c2d-95e1-00ab2c53b95e") + (net 52 "unconnected-(U1-IO22-Pad36)") + (uuid "c3808808-3801-5d91-84ec-f550e82888fb") + ) + (pad "37" smd rect + (at 8.75 -3.99 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "a1c7862f-f61f-429f-8bfb-54e911fcb4c5") + (net 53 "unconnected-(U1-IO23-Pad37)") + (uuid "57678c4f-5185-5ae2-a11d-ed9e0327dbd1") + ) + (pad "38" smd rect + (at 8.75 -5.26 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "70aebf0b-4ef0-48ad-b944-2a511ec10266") + (net 1 "/GND") + (uuid "98b19ffc-fdb9-507e-8bf1-61ccd4a962ba") + ) + (pad "39" smd rect + (at -1.5 2.46 180) + (size 3.7 3.7) + (property pad_prop_heatsink) + (layers "F.Cu") + (zone_connect 2) + (net 1 "/GND") + (uuid "06530431-8bcf-5608-88e2-9e551ed76d33") + ) + (pad "39" smd rect + (at -2.9 1.06 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "2a79540c-e9f3-4c56-b697-b3574c1c3c5e") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -2.9 2.46 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "6fb3a553-b08e-4c2b-b985-68a1771cf673") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -2.9 3.86 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "0d38cf24-9fe9-4560-b25e-f7f29e858302") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -1.5 1.06 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "8ccb6e04-98b6-4e38-bb17-634d04f08b1e") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -1.5 2.46 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "5f10cd5f-8266-4a41-bb47-c1dfbc7b8f0d") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -1.5 3.86 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "20238581-146b-48fd-8869-c8cac548f27c") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -0.1 1.06 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "cc130642-720d-4987-90aa-5d333f991c42") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -0.1 2.46 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "f42d5508-edc1-40d6-ae33-ac51fbcc9d3a") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -0.1 3.86 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "2227fd0f-b48d-4c14-8f48-80e960588b32") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/RF_Module.3dshapes/ESP32-WROOM-32E.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/7cd83c1e-c6b7-5a66-a779-e12a7ddc11b2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" + (layer "F.Cu") + (uuid "dad623b4-cbcd-523c-ad44-7c007700e145") + (at 122 147) + (property "LCSC" "C84681" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d87981aa-067f-577c-b3af-5bf9dbd1e52a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOIC, 16 Pin (JEDEC MS-012, variation AC, https://www.jedec.org/document_search?search_api_views_fulltext=MS-012, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOIC SO 16-pin-NSOP R-16 R-16-S D0016A M2B SO16 SOT109-1 751B SOIC_N narrow") + (property "Reference" "U2" + (uuid "3ad5e655-4fdf-5324-acd8-5a5fb2972dc3") + (at 0 -5.9 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "CH340C" + (uuid "d862b92a-0017-596e-9536-89c3dd59369a") + (at 0 5.9 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -2.06 -5.06) + (end 2.06 -5.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.06 -5.005) + (end -2.06 -5.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.06 5.06) + (end -2.06 5.005) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 2.06 -5.06) + (end 2.06 -5.005) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 2.06 5.005) + (end 2.06 5.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 2.06 5.06) + (end -2.06 5.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -2.6 -5.01) + (xy -2.84 -5.34) + (xy -2.36 -5.34) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -3.7 -5) + (end -2.2 -5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.7 5) + (end -3.7 -5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.2 -5.2) + (end 2.2 -5.2) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.2 -5) + (end -2.2 -5.2) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.2 5) + (end -3.7 5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.2 5.2) + (end -2.2 5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.2 -5.2) + (end 2.2 -5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.2 -5) + (end 3.7 -5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.2 5) + (end 2.2 5.2) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.2 5.2) + (end -2.2 5.2) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 3.7 -5) + (end 3.7 5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 3.7 5) + (end 2.2 5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.975 -4.95) + (xy 1.95 -4.95) + (xy 1.95 4.95) + (xy -1.95 4.95) + (xy -1.95 -3.975) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -2.475 -4.445) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "30e60c26-f4b9-5e02-8be2-b49640d6c6b4") + ) + (pad "2" smd roundrect + (at -2.475 -3.175) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 27 "/U0RXD") + (uuid "4ef9538a-5fca-5309-9b89-4ecf452439d1") + ) + (pad "3" smd roundrect + (at -2.475 -1.905) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 28 "/U0TXD") + (uuid "b2e8fcd0-debb-5706-beb7-fef05a3f42dd") + ) + (pad "4" smd roundrect + (at -2.475 -0.635) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "1625d485-d76a-5885-bcf3-16881b2f840e") + ) + (pad "5" smd roundrect + (at -2.475 0.635) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 30 "/USB_DP") + (uuid "d1c66cec-edd9-58c8-b15d-1ab0447f4284") + ) + (pad "6" smd roundrect + (at -2.475 1.905) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 29 "/USB_DM") + (uuid "23cfb33c-76aa-58fa-a306-979f086bb931") + ) + (pad "7" smd roundrect + (at -2.475 3.175) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 66 "unconnected-(U2-NC-Pad7)") + (uuid "1c174948-302a-5e37-9975-886782452fc7") + ) + (pad "8" smd roundrect + (at -2.475 4.445) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 67 "unconnected-(U2-NC-Pad8)") + (uuid "89cb3909-0811-5e0e-b881-d4d908147a97") + ) + (pad "9" smd roundrect + (at 2.475 4.445) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 69 "unconnected-(U2-~{CTS}-Pad9)") + (uuid "3913fab7-3d8d-5bc3-a3e8-04c244192f80") + ) + (pad "10" smd roundrect + (at 2.475 3.175) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 71 "unconnected-(U2-~{DSR}-Pad10)") + (uuid "3f46259f-ed07-5fc4-a464-b3433ac4a261") + ) + (pad "11" smd roundrect + (at 2.475 1.905) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 72 "unconnected-(U2-~{RI}-Pad11)") + (uuid "730fe26f-6325-5704-81ed-0ff45b715442") + ) + (pad "12" smd roundrect + (at 2.475 0.635) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 70 "unconnected-(U2-~{DCD}-Pad12)") + (uuid "7326246d-1e9b-5148-89c5-09b331541276") + ) + (pad "13" smd roundrect + (at 2.475 -0.635) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 9 "/DTR") + (uuid "7debfb9d-c1ec-5aef-be72-d25ac3e7bf0c") + ) + (pad "14" smd roundrect + (at 2.475 -1.905) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 24 "/RTS") + (uuid "42d98ab9-dc7a-53f8-aca5-add3fe03bb23") + ) + (pad "15" smd roundrect + (at 2.475 -3.175) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 68 "unconnected-(U2-R232-Pad15)") + (uuid "fa84d197-61f1-567d-8c97-c6af210a8b7d") + ) + (pad "16" smd roundrect + (at 2.475 -4.445) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "5ce6e0ed-d7bf-5960-9f63-28215f9446b9") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-16_3.9x9.9mm_P1.27mm.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/ae46ffd7-7a16-5ced-a31e-415062575590") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" + (layer "F.Cu") + (uuid "f4fb018d-8fb8-5738-b9a8-1f706d714830") + (at 166 141.5) + (property "LCSC" "C6186" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e115f1b5-a27c-55c8-986f-de6af4c0f5ba") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "module CMS SOT223 4 pins") + (tags "CMS SOT") + (property "Reference" "U3" + (at 0 -4.5 0) + (layer "F.SilkS") + (uuid "095b50a5-76ce-476b-aa10-37a37fa441f1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "AMS1117-3.3" + (at 0 4.5 0) + (layer "F.Fab") + (uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "0fecb949-4744-4c65-8091-70f595847ba4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "7dd6192e-e612-428f-816e-6f28697542d5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.85 -3.41) + (end 1.91 -3.41) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d") + ) + (fp_line + (start -1.85 3.41) + (end 1.91 3.41) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "6e43f798-7915-403c-b947-4851bde35045") + ) + (fp_line + (start 1.91 -3.41) + (end 1.91 -2.15) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "ddfc40c4-e33c-493e-b735-24282440d539") + ) + (fp_line + (start 1.91 3.41) + (end 1.91 2.15) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "79366377-6a9f-460a-b0d1-788467590954") + ) + (fp_poly + (pts + (xy -3.13 -3.31) + (xy -3.37 -3.64) + (xy -2.89 -3.64) + (xy -3.13 -3.31) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + (uuid "27420593-f422-495a-9e17-88a99bcd8a3d") + ) + (fp_line + (start -4.4 -3.6) + (end -4.4 3.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2d708b29-208a-4760-a2c5-6626e4d03d29") + ) + (fp_line + (start -4.4 3.6) + (end 4.4 3.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270") + ) + (fp_line + (start 4.4 -3.6) + (end -4.4 -3.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d963e7fb-b321-4298-bcd6-9650f5938938") + ) + (fp_line + (start 4.4 3.6) + (end 4.4 -3.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "18839f08-10e9-4a73-9312-8be172f09091") + ) + (fp_line + (start -1.85 -2.35) + (end -1.85 3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc") + ) + (fp_line + (start -1.85 -2.35) + (end -0.85 -3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f393364a-2641-4746-ba4c-6509ea1de503") + ) + (fp_line + (start -1.85 3.35) + (end 1.85 3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "27db54e0-f4a8-4972-bcbc-256787416dcd") + ) + (fp_line + (start -0.85 -3.35) + (end 1.85 -3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "be579ebe-38db-4860-98f0-9f530f704760") + ) + (fp_line + (start 1.85 -3.35) + (end 1.85 3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (pad "1" smd roundrect + (at -3.15 -2.3) + (size 2 1.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448") + (net 1 "/GND") + (uuid "ec269813-7c7f-5891-be62-ea24ae12eb4d") + ) + (pad "2" smd roundrect + (at -3.15 0) + (size 2 1.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8") + (net 3 "/+3V3") + (uuid "ceecb2a5-4c16-51b1-932d-d9f0710eb663") + ) + (pad "2" smd roundrect + (at 3.15 0) + (size 2 3.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e") + (net 3 "/+3V3") + (uuid "ceecb2a5-4c16-51b1-932d-d9f0710eb663") + ) + (pad "3" smd roundrect + (at -3.15 2.3) + (size 2 1.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "5046df04-2b74-45a5-867e-e33a5e51e59c") + (net 4 "/+5V") + (uuid "4a1908a0-fad9-5454-98ee-f74fb4c420be") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d4a02e29-917d-50de-86ba-f0a34c73b816") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-23-5" + (layer "F.Cu") + (uuid "fbccb7b0-7bcf-5dec-9b66-2aaff9aaa175") + (at 165.5 130) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "98b456c0-43a9-5442-8836-47113cfc5771") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOT, 5 Pin (JEDEC MO-178 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-178), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOT TO_SOT_SMD") + (property "Reference" "U4" + (uuid "061ad332-d919-5c44-9250-f2508b7492b9") + (at 0 -2.4 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "74AHCT1G125" + (uuid "7ef42316-c277-51ea-8faa-1f499b7fd48d") + (at 0 2.4 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.91 -1.56) + (end 0.91 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.91 -1.51) + (end -0.91 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.91 1.56) + (end -0.91 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 -1.56) + (end 0.91 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 -0.39) + (end 0.91 0.39) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 1.51) + (end 0.91 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 1.56) + (end -0.91 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -1.45 -1.51) + (xy -1.69 -1.84) + (xy -1.21 -1.84) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -2.05 -1.5) + (end -1.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.05 1.5) + (end -2.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 -1.7) + (end 1.05 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 -1.5) + (end -1.05 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 1.5) + (end -2.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 1.7) + (end -1.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 -1.7) + (end 1.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 -1.5) + (end 2.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 -0.39) + (end 1.05 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 0.39) + (end 2.05 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 1.5) + (end 1.05 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 1.7) + (end -1.05 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 -1.5) + (end 2.05 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 -0.39) + (end 1.05 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 0.39) + (end 2.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 1.5) + (end 1.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.4 -1.45) + (xy 0.8 -1.45) + (xy 0.8 1.45) + (xy -0.8 1.45) + (xy -0.8 -1.05) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 0.72 0.72) + (thickness 0.11) + ) + ) + ) + (pad "1" smd roundrect + (at -1.1375 -0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "a9705570-2c06-51ff-b770-decc19f5e66e") + ) + (pad "2" smd roundrect + (at -1.1375 0) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 19 "/LED_DATA") + (uuid "a32b462b-accb-58cd-841e-e56218701072") + ) + (pad "3" smd roundrect + (at -1.1375 0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "69a285c5-4ac4-55cc-8e56-15d0645d5274") + ) + (pad "4" smd roundrect + (at 1.1375 0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 18 "/LED_BUF") + (uuid "a18aa55d-47ad-571a-bb90-4b7e5501697e") + ) + (pad "5" smd roundrect + (at 1.1375 -0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 4 "/+5V") + (uuid "772927f1-027d-5c33-aa4e-56c022828e9f") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/f710d186-b3dd-51fc-8a27-8c527bde241d") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (gr_rect + (start 100 100) + (end 180 163.34) + (stroke + (width 0.05) + (type default) + ) + (fill no) + (layer "Edge.Cuts") + (uuid "53c46d28-bda7-5d4c-9b58-294289f37b27") + ) + (gr_text "SANDTABLE" + (at 153.8 127.6 0) + (layer "F.SilkS") + (uuid "58a508d1-de92-5d35-bf14-4ac1b4c32eb2") + (effects + (font + (size 1.1 1.1) + (thickness 0.165) + (bold yes) + ) + ) + ) + (gr_text "CTRL v0.3" + (at 153.8 129.6 0) + (layer "F.SilkS") + (uuid "d1b8a673-04f3-5144-8a48-bf4f349f600b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SPIN" + (at 104.5 115.2 0) + (layer "F.SilkS") + (uuid "8b9978ec-b48b-544a-9de6-2209d4d75ae7") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "12V" + (at 102.4 117.6 0) + (layer "F.SilkS") + (uuid "dc612d7b-e767-5a33-8edc-6afea291e4fb") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "USB" + (at 102.2 137.3 0) + (layer "F.SilkS") + (uuid "fe3c31ba-dae5-56d3-95fa-9f566a675886") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "ARM" + (at 171 107.15 90) + (layer "F.SilkS") + (uuid "0753cdda-bfcc-5732-b3e2-06f3d940ac17") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "HOME" + (at 171 121 90) + (layer "F.SilkS") + (uuid "f9140ffa-03c8-5406-ba77-596ecf015d75") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "HALL" + (at 171.4 133.6 90) + (layer "F.SilkS") + (uuid "04bea5ee-c46f-5903-b769-a12ceb56337b") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "LED" + (at 171 143.2 90) + (layer "F.SilkS") + (uuid "597248de-7179-5bbf-97a1-cbdaec2fbf96") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "EXP" + (at 174.6 155.8 90) + (layer "F.SilkS") + (uuid "aeefdf18-73b2-5aa9-81cc-def10901ec8b") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "VMOT" + (at 120.32 103.5 0) + (layer "F.SilkS") + (uuid "b94b9eb2-be55-5ecf-9d4e-fc1a0a4db896") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "EN" + (at 120.32 113 0) + (layer "F.SilkS") + (uuid "608d34fd-bb99-5ae3-95d0-f6c537b22e1a") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "DIR" + (at 138.1 113 0) + (layer "F.SilkS") + (uuid "902d07be-ea12-57aa-9928-847cc0d16567") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "VMOT" + (at 141.32 103.5 0) + (layer "F.SilkS") + (uuid "5124b8e9-fc69-5aa6-8707-4af39c366864") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "EN" + (at 141.32 113 0) + (layer "F.SilkS") + (uuid "8a901ef6-7dac-51af-ae04-c88c516ee5cf") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "DIR" + (at 159.1 113 0) + (layer "F.SilkS") + (uuid "c2c9c71a-d75e-583b-98e5-5a47da0637a1") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "SANDTABLE CONTROLLER v0.3" + (at 140 130 0) + (layer "B.SilkS") + (uuid "9e954332-c3b7-5dac-8991-3aee89641ff1") + (effects + (font + (size 1.6 1.6) + (thickness 0.24) + (bold yes) + ) + (justify mirror) + ) + ) + (gr_text "ESP32 + 2x DRV8825 | 12V in | FluidNC" + (at 140 133 0) + (layer "B.SilkS") + (uuid "78638186-0c48-5189-8ac3-e2550afdf4b0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (gr_text "lazypugs 2026" + (at 140 135.5 0) + (layer "B.SilkS") + (uuid "e12a2ff1-fc9d-5d6a-b879-403c55711f78") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (gr_text "WayWayWay" + (at 140 138 0) + (layer "B.SilkS") + (uuid "cefbd5f2-d2f7-55e2-afa2-804d3439077b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (segment + (start 107.445 143.75) + (end 109 143.75) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "e4a5d5ca-7443-5bbd-87e3-3790f578c237") + ) + (segment + (start 107.445 144.75) + (end 109 144.75) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "f0199340-6cd5-5793-b64e-4eaaaa24f9a3") + ) + (segment + (start 109 143.75) + (end 109 144.75) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "72cdc08e-d3b1-5ce4-8e77-1199fe38af53") + ) + (segment + (start 107.445 143.25) + (end 106.15 143.25) + (width 0.2) + (layer "F.Cu") + (net 29) + (uuid "227913f1-3b97-555f-b125-3e85ae8a0319") + ) + (segment + (start 107.445 144.25) + (end 106.15 144.25) + (width 0.2) + (layer "F.Cu") + (net 29) + (uuid "f1367aee-d1d2-5722-b4ec-09b38ac9590f") + ) + (segment + (start 106.15 143.25) + (end 106.15 144.25) + (width 0.2) + (layer "B.Cu") + (net 29) + (uuid "299322f0-02a9-55df-8d5f-891c3836c03f") + ) + (segment + (start 107.445 142.75) + (end 110.675 142.75) + (width 0.2) + (layer "F.Cu") + (net 6) + (uuid "ecbac6ce-9ed3-5d65-8ff0-779d83cecf1c") + ) + (segment + (start 107.445 145.75) + (end 110.675 145.75) + (width 0.2) + (layer "F.Cu") + (net 7) + (uuid "279ae33e-8a69-5fcf-a8f9-e3ef89bb157e") + ) + (segment + (start 107.445 140.75) + (end 109.3 140.75) + (width 0.4) + (layer "F.Cu") + (net 1) + (uuid "9d172a68-e699-5db6-b1cc-1e4fb1288685") + ) + (segment + (start 107.445 147.25) + (end 109.3 147.25) + (width 0.4) + (layer "F.Cu") + (net 1) + (uuid "a3e888ba-b4c0-540a-b3a8-1098145301b1") + ) + (segment + (start 107.445 141.55) + (end 109.3 141.55) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "1abad463-01a3-5ab0-89ca-d82c196c5189") + ) + (segment + (start 107.445 146.45) + (end 109.3 146.45) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "837acb9e-55bd-5893-b061-aa84c90698d7") + ) + (segment + (start 109 144.2) + (end 115.4 144.2) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "b3ae0c56-78be-54fe-b971-d14834d6951d") + ) + (segment + (start 115.4 144.2) + (end 118.6 147.4) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "fc068328-025d-51ae-b8eb-715b41c3fec8") + ) + (segment + (start 106.2 143.8) + (end 110 147.6) + (width 0.2) + (layer "B.Cu") + (net 29) + (uuid "3f698d42-3387-562e-9a54-66f362910d75") + ) + (segment + (start 110 147.6) + (end 111.1 148.7) + (width 0.2) + (layer "F.Cu") + (net 29) + (uuid "03a40365-095b-5589-ac4b-02502f40f4c9") + ) + (segment + (start 111.1 148.7) + (end 118.6 148.7) + (width 0.2) + (layer "F.Cu") + (net 29) + (uuid "a64ca124-50e3-5943-8b1d-a9605518f241") + ) + (segment + (start 109.3 141.5) + (end 109.3 142) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "d4b3c778-b367-58be-8b40-a215d767e21f") + ) + (segment + (start 109.3 142) + (end 109.3 145.6) + (width 0.4) + (layer "B.Cu") + (net 31) + (uuid "e2a95241-c2a9-5d69-92bb-a0ae472b75f5") + ) + (segment + (start 109.3 145.6) + (end 110.6 146.9) + (width 0.4) + (layer "B.Cu") + (net 31) + (uuid "e97e64f2-c9f8-5c8f-90a1-440ad83686d7") + ) + (segment + (start 110.6 146.9) + (end 110.5 146.8) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "fa8b7104-85da-5a16-9279-3910cb439273") + ) + (segment + (start 110.5 146.8) + (end 109.9 146.8) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "0eaf4c01-dab8-5b67-8b7d-b79a7d7af1e8") + ) + (segment + (start 109.9 146.8) + (end 109.5 146.4) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "bb2aeaf5-8bc7-5748-ae53-f5ce68956ccc") + ) + (segment + (start 109.5 146.4) + (end 109.3 146.4) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "772bcc31-e46d-5c1a-af2f-c973220936ec") + ) + (segment + (start 109.3 141.5) + (end 112.9 141.5) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "3032f4f4-407d-51a2-a400-ae7ce228794c") + ) + (segment + (start 112.9 141.5) + (end 114.2 140.2) + (width 0.4) + (layer "F.Cu") + (net 31) + (uuid "78ff994a-3d98-5af4-94b0-e15d2c844163") + ) + (segment + (start 113.3 124) + (end 115.1 124) + (width 0.8) + (layer "F.Cu") + (net 32) + (uuid "8e60e680-2f87-5206-bbee-63432fdabebc") + ) + (segment + (start 120 102.6) + (end 118.8 103.8) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "3b1d0a7c-4c07-5b6f-a8b5-64bac61eb14a") + ) + (segment + (start 118.8 103.8) + (end 118.8 119) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "6ded7566-3ed0-5430-8610-f1c3143814cb") + ) + (segment + (start 118.8 119) + (end 119.6 119.8) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "7e3164e1-fcfe-5601-84a1-feeb32f15440") + ) + (segment + (start 119 120) + (end 116.9 120) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "83dbd802-0c7d-51c9-a85d-f4c593f958e5") + ) + (segment + (start 119 122.2) + (end 118.7 122.5) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "e072d3b4-1b7c-5fd2-91d1-9966642f1035") + ) + (segment + (start 118.7 122.5) + (end 118.7 133.9) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "87847065-2930-5423-be26-89fb61b8480c") + ) + (segment + (start 118.7 136.1) + (end 118.7 138.7) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "302c6aad-5da9-549e-b235-bf980a075b1e") + ) + (segment + (start 122.5 119.8) + (end 123.3 119) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "fa2f5057-31f2-509f-8f8c-d6c783006ecb") + ) + (segment + (start 123.3 119) + (end 139.7 119) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "7e8e2fa2-5736-5990-8eeb-f5a5c3a46dc3") + ) + (segment + (start 139.7 119) + (end 140.5 119.8) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "e2bd9aa6-a944-502d-afcf-5eff4f228bf6") + ) + (segment + (start 139.7 119) + (end 139.7 103.9) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "9c4cc666-e367-5a47-a7b8-92b1f2024456") + ) + (segment + (start 139.7 103.9) + (end 141 102.6) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "309af67c-840d-5e6e-b6e5-42ec993e65f4") + ) + (segment + (start 105.4 103.3) + (end 117.9 103.3) + (width 0.5) + (layer "F.Cu") + (net 33) + (uuid "a1db6d57-f201-51c8-ad17-063890b4089a") + ) + (segment + (start 117.9 103.3) + (end 120.7 103.3) + (width 0.5) + (layer "B.Cu") + (net 33) + (uuid "d695e080-87ca-5f9f-8844-666d431f94c4") + ) + (segment + (start 120.7 103.3) + (end 128.8 103.3) + (width 0.5) + (layer "F.Cu") + (net 33) + (uuid "cf45ecbb-5004-5b5e-a85b-4234992b88f9") + ) + (segment + (start 128.8 103.3) + (end 129.8 102.3) + (width 0.5) + (layer "F.Cu") + (net 33) + (uuid "9307c849-4d78-545d-8031-5a85ec17e421") + ) + (segment + (start 105.3 105.4) + (end 117.8 105.4) + (width 0.5) + (layer "F.Cu") + (net 34) + (uuid "43fd8d46-3289-53b2-932b-546cef57ae6b") + ) + (segment + (start 117.8 105.4) + (end 119.8 105.4) + (width 0.5) + (layer "B.Cu") + (net 34) + (uuid "1b792de5-fff7-5e0d-9b4d-08bb90855d51") + ) + (segment + (start 119.8 105.4) + (end 129.1 105.4) + (width 0.5) + (layer "F.Cu") + (net 34) + (uuid "22d61b6d-dc0d-56d5-8fd6-279861add905") + ) + (segment + (start 129.1 105.4) + (end 132.3 102.2) + (width 0.5) + (layer "F.Cu") + (net 34) + (uuid "b409bf77-e3e9-5162-b6d2-68d41bdae58e") + ) + (segment + (start 105.4 108.1) + (end 109.3 104.2) + (width 0.5) + (layer "B.Cu") + (net 35) + (uuid "987ca278-024c-5781-a35b-415e6c37ef04") + ) + (segment + (start 109.3 104.2) + (end 125.2 104.2) + (width 0.5) + (layer "B.Cu") + (net 35) + (uuid "a5cc368b-f4c8-598c-8080-e539828ccf4b") + ) + (segment + (start 125.2 104.2) + (end 127.2 102.2) + (width 0.5) + (layer "B.Cu") + (net 35) + (uuid "15daacd2-10f5-5790-a6fc-8e828521a148") + ) + (segment + (start 104.9 110.1) + (end 106 109) + (width 0.3) + (layer "F.Cu") + (net 36) + (uuid "ca89f006-59c1-5df5-b09b-1fdf8b95ef88") + ) + (segment + (start 106 109) + (end 106 106.3) + (width 0.3) + (layer "F.Cu") + (net 36) + (uuid "43f6c469-33f4-5fcb-95a3-833bdcca77e1") + ) + (segment + (start 106 106.3) + (end 109.9 102.4) + (width 0.3) + (layer "B.Cu") + (net 36) + (uuid "ab610d2f-2d5c-5525-9f1a-e72556acf322") + ) + (segment + (start 109.9 102.4) + (end 111.7 100.6) + (width 0.3) + (layer "F.Cu") + (net 36) + (uuid "49113c11-b464-58ef-a29d-13587997599b") + ) + (segment + (start 111.7 100.6) + (end 123.7 100.6) + (width 0.3) + (layer "F.Cu") + (net 36) + (uuid "990a2633-9667-52f1-abbe-22408d08035f") + ) + (segment + (start 123.7 100.6) + (end 124.7 101.6) + (width 0.3) + (layer "F.Cu") + (net 36) + (uuid "2a4a3644-7484-5af9-a1bf-2e81cd93f9e5") + ) + (segment + (start 152.2 102.2) + (end 153.3 103.3) + (width 0.5) + (layer "F.Cu") + (net 39) + (uuid "955f0f32-c6ce-5efb-af92-4f9ffcfeb788") + ) + (segment + (start 153.3 103.3) + (end 175.6 103.3) + (width 0.5) + (layer "F.Cu") + (net 39) + (uuid "bcaa818c-2b5c-5c81-b440-be2b9fc6601c") + ) + (segment + (start 154.7 102.3) + (end 156.6 104.2) + (width 0.5) + (layer "B.Cu") + (net 40) + (uuid "6bc24f1c-6263-5eaa-9c53-c19ce79e92b9") + ) + (segment + (start 156.6 104.2) + (end 158 105.6) + (width 0.5) + (layer "F.Cu") + (net 40) + (uuid "abeafbfa-b6bc-5f46-a82e-e23d3c4bfe1c") + ) + (segment + (start 158 105.6) + (end 175.6 105.6) + (width 0.5) + (layer "F.Cu") + (net 40) + (uuid "3cf6dd81-f658-5559-8e52-9685a57ebfa3") + ) + (segment + (start 149.7 102.1) + (end 155.7 108.1) + (width 0.5) + (layer "F.Cu") + (net 41) + (uuid "0ede1ebf-97af-578d-8227-e9849700a63e") + ) + (segment + (start 155.7 108.1) + (end 175.6 108.1) + (width 0.5) + (layer "F.Cu") + (net 41) + (uuid "2c3a35a3-0a81-5301-a616-84e5eaaac7db") + ) + (segment + (start 147.1 102.2) + (end 155.5 110.6) + (width 0.5) + (layer "F.Cu") + (net 42) + (uuid "790249ac-a812-5eeb-bd62-494caf480e68") + ) + (segment + (start 155.5 110.6) + (end 175.6 110.6) + (width 0.5) + (layer "F.Cu") + (net 42) + (uuid "9f94a8e6-3ac6-5f99-b21b-53c14c1b6604") + ) + (segment + (start 137.3 132.9) + (end 137.3 137.4) + (width 0.2) + (layer "F.Cu") + (net 25) + (uuid "8f900e12-b4b2-57d4-a895-dc05568eb90f") + ) + (segment + (start 123.3 136.1) + (end 123.3 138) + (width 0.4) + (layer "F.Cu") + (net 5) + (uuid "91c3c6ca-d4a0-569a-add8-fb1ad5c8a2d4") + ) + (segment + (start 123.3 138) + (end 124 138.7) + (width 0.4) + (layer "F.Cu") + (net 5) + (uuid "65066933-8507-51a7-b9b9-c186333aa17b") + ) + (segment + (start 125.1 138.7) + (end 126.2 138.7) + (width 0.4) + (layer "F.Cu") + (net 5) + (uuid "abbfe0ea-fe2b-5c6a-9ce5-1d52238dcbf7") + ) + (segment + (start 126.2 138.7) + (end 129.5 135.4) + (width 0.4) + (layer "F.Cu") + (net 5) + (uuid "0ac22200-9376-5b59-b4fd-c5f3f8838049") + ) + (segment + (start 129.5 135.4) + (end 130.2 135.4) + (width 0.4) + (layer "F.Cu") + (net 5) + (uuid "ee798e96-e84d-50a7-bb0e-1a32f3bfd33b") + ) + (segment + (start 111.8 139.2) + (end 113.3 137.7) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "ae53ded2-87cb-5a49-a749-5a6b1315d867") + ) + (segment + (start 113.3 137.7) + (end 117.7 137.7) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "c1b09fab-eb59-534f-bb56-3b05289be2b6") + ) + (segment + (start 117.7 137.7) + (end 124.2 137.7) + (width 0.4) + (layer "B.Cu") + (net 4) + (uuid "4e342c50-2aa2-553a-b715-894f47577d7c") + ) + (segment + (start 124.2 137.7) + (end 126.9 135) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "a2d17861-9fb7-500f-86bf-af958c7b4d98") + ) + (segment + (start 127.8 134.4) + (end 130.7 131.5) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "cab3cda8-d87a-58a4-9a97-c8b088e32975") + ) + (segment + (start 130.7 131.5) + (end 145.1 131.5) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "2d24b946-2b7c-557c-8edb-ac93f53a623a") + ) + (segment + (start 145.1 131.5) + (end 145.6 132) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "2dae1764-dfd9-5cb7-abad-86f6b1ae393b") + ) + (segment + (start 145.6 132) + (end 159.7 132) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "155ec12b-4d3e-5690-8af9-67b4099980a6") + ) + (segment + (start 159.7 132) + (end 160.6 131.1) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "d2e56b10-d21c-520e-a123-9ed9b7b97a07") + ) + (segment + (start 161.4 130.4) + (end 161.5 130.4) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "f5ac67d6-fcc0-5d0e-b528-a032a43617b7") + ) + (segment + (start 161.5 130.4) + (end 163.2 128.7) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "b0cd6250-0159-5371-ab61-f4a7052bf3cd") + ) + (segment + (start 163.2 128.7) + (end 163.2 128.5) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "0cb29192-06e6-55f3-8103-ec0d043055b6") + ) + (segment + (start 163.2 128.5) + (end 163.5 128.2) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "2077d8b4-16ab-5b4a-9a6e-7b0c8aed9f8b") + ) + (segment + (start 163.5 128.2) + (end 165.4 128.2) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "425334f2-45ba-5715-9f87-caaf400a5f33") + ) + (segment + (start 165.4 128.2) + (end 166 128.8) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "6003bcfc-aeda-578b-a527-a8678df95d37") + ) + (segment + (start 167.3 128.8) + (end 167.9 128.2) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "f41fd6c7-d35a-5a83-9dfb-b83030dec897") + ) + (segment + (start 167.9 128.2) + (end 175 128.2) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "a11ad6b9-f908-5cd5-9ce4-32a8bc792863") + ) + (segment + (start 175 128.2) + (end 175.6 128.8) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "a3248845-7489-5232-9fe4-920024dfcdee") + ) + (segment + (start 175.6 130.4) + (end 175 131) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "c76dd6d1-9007-518d-804e-7ff26f6b5962") + ) + (segment + (start 175 131) + (end 175 139.2) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "fadd2b6f-0022-599c-b9f0-d5db5984cb0c") + ) + (segment + (start 175 139.2) + (end 175.7 139.9) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "0b232055-08c4-5f9a-b293-95a7c1a0356e") + ) + (segment + (start 158.3 132) + (end 158.3 143.7) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "dc0f835e-8099-530f-af87-c4f90bb62b2d") + ) + (segment + (start 158.3 143.7) + (end 159.1 144.5) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "fbe63410-b16b-5c5b-8496-9da890b3a37d") + ) + (segment + (start 160.3 144.5) + (end 161.9 144.5) + (width 0.4) + (layer "F.Cu") + (net 4) + (uuid "8fb16d0e-c5e4-5ff2-824b-fc8459e4f94d") + ) + (segment + (start 135.2 102.6) + (end 133.4 104.4) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "ba565d33-4a07-5ba7-8036-de491d99422b") + ) + (segment + (start 133.4 104.4) + (end 133.4 113.9) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "b02ce8e9-f5ef-5300-bf07-273569549d20") + ) + (segment + (start 132.3 114.6) + (end 131.2 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "d92a3fe3-5f9b-5546-81ca-a3886174e826") + ) + (segment + (start 129.7 114.6) + (end 128.7 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "4193cfce-90f6-534b-b3c5-843e16520a3b") + ) + (segment + (start 127.2 114.6) + (end 126.2 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "39b639d0-1e1f-5f7a-bdf9-5e192c90972e") + ) + (segment + (start 124.6 114.6) + (end 123.6 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "2881aa32-5fa1-5e19-a409-5083da44e0d1") + ) + (segment + (start 133.7 114.2) + (end 134.6 113.3) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "2c6c02d1-0529-5743-bda1-e9eaa1c3ef3d") + ) + (segment + (start 134.6 113.3) + (end 142 113.3) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "bd812a9b-6d30-5562-ad68-52925b208cf2") + ) + (segment + (start 142 113.3) + (end 143.1 114.4) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "c444f540-7cdc-5eb0-879c-ec727d05264f") + ) + (segment + (start 144.6 114.6) + (end 145.6 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "0320386c-6574-5547-8e2b-82ab3a4d3a69") + ) + (segment + (start 147.2 114.6) + (end 148.2 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "499b859b-5dd6-59d1-96de-7acd3f372fb3") + ) + (segment + (start 149.7 114.6) + (end 150.7 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "24d29de8-edf5-57df-84a1-c9e3dd2be09f") + ) + (segment + (start 152.2 114.6) + (end 153.3 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "f1280bf0-bb2d-59e7-b149-660af9003de3") + ) + (segment + (start 153.5 115.2) + (end 153.5 118.1) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "0030e1ea-949f-5d58-9218-b8b7586786d1") + ) + (segment + (start 153.2 118.9) + (end 153.2 120.3) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "96d4cd16-9c3b-555a-a51a-51614846ba91") + ) + (segment + (start 154.4 113.9) + (end 157.4 110.9) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "9570ed7f-59d5-54e4-86cc-c304789f66aa") + ) + (segment + (start 157.4 110.9) + (end 157.4 103.1) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "0eca23e3-d702-5581-a537-bebac6f9a8a5") + ) + (segment + (start 157.4 103.1) + (end 156.9 102.6) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "85024c27-ef25-5588-8c9d-9ae2a7f9cb49") + ) + (segment + (start 152.8 121.1) + (end 146.5 127.4) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "81a0a9ed-84a8-59f8-8393-edd10ebcebad") + ) + (segment + (start 146.5 127.4) + (end 146.5 130.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "a9e659e3-0325-5263-a5e2-53e3faf26184") + ) + (segment + (start 145.8 130.7) + (end 139.8 130.7) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "5c27b1a7-0434-5e60-bf99-87079b4643dd") + ) + (segment + (start 139.8 130.7) + (end 139.3 130.7) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "c7080ce8-fd9b-5a1f-83a8-dc3967252a92") + ) + (segment + (start 139.3 130.7) + (end 136.5 133.5) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "a3680e92-b87e-5950-89e7-3dc6b2e0f47a") + ) + (segment + (start 136.5 133.5) + (end 134.2 133.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "47101a93-2ef8-50cc-b489-01a7fe71ff76") + ) + (segment + (start 134.2 133.5) + (end 133.5 132.8) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "8b7957af-9652-5f4d-b9de-3ebab47ea265") + ) + (segment + (start 134.2 133.5) + (end 130.5 137.2) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "0b8d944d-319a-511e-8597-7ded6bf47337") + ) + (segment + (start 129.8 137.9) + (end 129.8 141.1) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "9f80e898-f6af-5b72-8b8f-42c4b0f89fff") + ) + (segment + (start 129.8 141.1) + (end 127.4 143.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "6a9cb650-58b9-515e-b48b-b55e91b8af85") + ) + (segment + (start 126.6 143.4) + (end 126.1 143.4) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "8ae69b67-bdb5-55c0-a2fd-57402e08f7a0") + ) + (segment + (start 126.1 143.4) + (end 125.4 142.7) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "3a9e6c1f-a0c1-5c2f-b252-d5c2f51f998c") + ) + (segment + (start 123.5 142.8) + (end 121 145.3) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "5c3b658c-c4c0-5cba-aaf1-d815a118a468") + ) + (segment + (start 121 145.3) + (end 121 145.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "a7f1b393-ab64-5973-902e-c22d8b372080") + ) + (segment + (start 121 145.6) + (end 120.5 146.1) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "965240de-550b-5d79-8223-4b1aab18a78f") + ) + (segment + (start 146.5 129.9) + (end 147.5 129.9) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "329f61e2-3581-5ba0-8c99-becfda349912") + ) + (segment + (start 147.5 129.9) + (end 159.1 141.5) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "f7ce5565-93c6-5e86-82e5-fdbe527225c4") + ) + (segment + (start 159.1 141.5) + (end 159.1 140.9) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "21295c70-f08b-59a5-b36d-8d2df236771f") + ) + (segment + (start 160.3 140.9) + (end 161.9 140.9) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "d9677687-9a93-5806-865f-2ec372a2a3c4") + ) + (segment + (start 163.8 141.5) + (end 168.2 141.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "33e1f55e-f0a1-56e3-baa5-bb2a24907532") + ) + (segment + (start 159.1 141.5) + (end 157.5 143.1) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "28716381-4f71-5d0d-b337-2ca45f8c2ca9") + ) + (segment + (start 157.5 143.1) + (end 154.1 146.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "ac2f9e4d-784a-5003-a24f-4f9acacb8809") + ) + (segment + (start 154.1 146.5) + (end 154.1 150.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "46cc570c-d0ab-50f7-98a3-a0898b064ee6") + ) + (segment + (start 154.1 150) + (end 153.2 150.9) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "92a018d9-daeb-5db7-8ffb-a346e7adc136") + ) + (segment + (start 153.2 150.9) + (end 153.2 153.8) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "8c656345-063f-55ba-8a2b-296a585ea31b") + ) + (segment + (start 153.2 153.8) + (end 152.5 154.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "ee09f6f4-2d97-5ff4-81be-a8ee34ece9d1") + ) + (segment + (start 153 154) + (end 154.6 155.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "1644beef-b5b1-5184-8210-2a29b9588c64") + ) + (segment + (start 155.4 155.5) + (end 156.8 155.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "6ec46ddf-9d10-5eb8-a677-68f2dfa931f5") + ) + (segment + (start 170.1 143.4) + (end 170.1 144.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "c3f5e599-a9ea-5ebf-8f8a-a13c03394668") + ) + (segment + (start 170.1 144.6) + (end 176.7 151.2) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "7b323f19-4deb-5649-aed9-77d689ce4670") + ) + (segment + (start 157.4 110.9) + (end 158 111.5) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "7a093094-5c1c-5cea-91cf-f1716fe69670") + ) + (segment + (start 158 111.5) + (end 164.2 117.7) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "754acf64-379d-5b4e-abae-2a0bb12bf9d4") + ) + (segment + (start 164.2 117.7) + (end 175.6 117.7) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "fc996d08-f4b8-5dda-a3fd-e2e3eae04c28") + ) + (segment + (start 139.2 129.8) + (end 139.9 129.8) + (width 0.2) + (layer "F.Cu") + (net 26) + (uuid "1efce965-24cc-5659-96bc-25140e790874") + ) + (segment + (start 139.9 129.8) + (end 140.5 130.4) + (width 0.2) + (layer "B.Cu") + (net 26) + (uuid "361fd977-f002-5014-ae86-8b00f24435bb") + ) + (segment + (start 140.5 130.4) + (end 140.5 131.6) + (width 0.2) + (layer "B.Cu") + (net 26) + (uuid "7e939aa0-4483-52f0-96b6-56262b52c08a") + ) + (segment + (start 140.5 131.6) + (end 139.8 132.3) + (width 0.2) + (layer "B.Cu") + (net 26) + (uuid "3fa887cc-f0e6-5f19-a9f4-77956c5fa8a6") + ) + (segment + (start 139.8 132.3) + (end 139.2 132.3) + (width 0.2) + (layer "F.Cu") + (net 26) + (uuid "779dafb7-ce4f-5a07-a004-009a7c40cc76") + ) + (segment + (start 135.2 130.4) + (end 135.5 130.7) + (width 0.2) + (layer "F.Cu") + (net 21) + (uuid "00be6570-580e-59c6-b955-7d9c9e394e0a") + ) + (segment + (start 135.5 130.7) + (end 135.7 130.7) + (width 0.2) + (layer "F.Cu") + (net 21) + (uuid "a76b7d41-1eb2-537d-80d8-877e71bd02a3") + ) + (segment + (start 135.7 130.7) + (end 135.7 132.2) + (width 0.2) + (layer "B.Cu") + (net 21) + (uuid "c726d11b-b09b-5f54-958d-3ad6e9df77e8") + ) + (segment + (start 135.7 132.2) + (end 135.8 132.3) + (width 0.2) + (layer "B.Cu") + (net 21) + (uuid "e16ff4e5-1a88-56c4-a514-4aa3dc03f6e9") + ) + (segment + (start 135.8 132.3) + (end 135.2 132.3) + (width 0.2) + (layer "F.Cu") + (net 21) + (uuid "a660e817-d499-5655-8f8c-14ae7fbcf6d4") + ) + (segment + (start 167.3 130.8) + (end 169.6 130.8) + (width 0.2) + (layer "F.Cu") + (net 18) + (uuid "e66ad4d2-fdd6-52ce-811e-c9e858d5b852") + ) + (segment + (start 127.8 150) + (end 128.8 149) + (width 0.2) + (layer "F.Cu") + (net 23) + (uuid "7458e9b4-165d-5be8-99f4-5adc6fb2ed29") + ) + (segment + (start 128.8 149) + (end 130.6 149) + (width 0.2) + (layer "F.Cu") + (net 23) + (uuid "49e342b6-46ab-5f20-80be-c1f87e9448eb") + ) + (segment + (start 127.8 146) + (end 129.3 144.5) + (width 0.2) + (layer "F.Cu") + (net 22) + (uuid "bb847c08-a913-52ea-8265-e58842403d4c") + ) + (segment + (start 129.3 144.5) + (end 130.6 144.5) + (width 0.2) + (layer "F.Cu") + (net 22) + (uuid "89b7f5b8-8a5f-50c5-88b7-2837e45b04b9") + ) + (segment + (start 125.4 145.3) + (end 125.9 145.8) + (width 0.2) + (layer "F.Cu") + (net 24) + (uuid "acc2ce97-2a98-5e89-83f4-c670e10175a8") + ) + (segment + (start 125.9 145.8) + (end 125.9 146.9) + (width 0.2) + (layer "F.Cu") + (net 24) + (uuid "0d10fa4d-a339-5ab6-8c23-5222047a5d69") + ) + (segment + (start 125.9 146.9) + (end 126.9 147.9) + (width 0.2) + (layer "F.Cu") + (net 24) + (uuid "8f34a9c1-61f6-5412-9b83-b3c10173d0ce") + ) + (segment + (start 127.8 148.4) + (end 128.3 148.4) + (width 0.2) + (layer "F.Cu") + (net 24) + (uuid "70bea13f-f426-5343-ad3a-9ef3ace179b8") + ) + (segment + (start 128.3 148.4) + (end 129.9 150) + (width 0.2) + (layer "B.Cu") + (net 24) + (uuid "7a0274d3-ac0c-5f74-8564-e1658033198f") + ) + (segment + (start 129.9 150) + (end 130.6 150) + (width 0.2) + (layer "F.Cu") + (net 24) + (uuid "5aa5487f-24af-5cc0-8d80-562391f74527") + ) + (segment + (start 123.5 146.1) + (end 123 146.1) + (width 0.2) + (layer "F.Cu") + (net 9) + (uuid "95061f6a-68fc-515b-a86c-3f7fe46625fd") + ) + (segment + (start 123 146.1) + (end 128.7 146.1) + (width 0.2) + (layer "B.Cu") + (net 9) + (uuid "6e7abf2c-3e65-5c35-b448-a38a88c7ad6a") + ) + (segment + (start 128.7 146.1) + (end 130.6 146.1) + (width 0.2) + (layer "F.Cu") + (net 9) + (uuid "06682fe7-37da-57ad-9cbc-8d485e084b36") + ) + (segment + (start 127.1 146.1) + (end 127.1 151.2) + (width 0.2) + (layer "B.Cu") + (net 9) + (uuid "9a672c14-8a86-50b3-ba96-e7d11d0decaf") + ) + (segment + (start 127.1 151.2) + (end 127.1 151.9) + (width 0.2) + (layer "F.Cu") + (net 9) + (uuid "864b0675-b420-50a6-ba47-238e6d5af5a1") + ) + (segment + (start 170.4 129.5) + (end 174.4 133.5) + (width 0.2) + (layer "F.Cu") + (net 20) + (uuid "9ac90f08-28ac-58a4-ade5-cf11adf82574") + ) + (segment + (start 174.4 133.5) + (end 174.4 141) + (width 0.2) + (layer "F.Cu") + (net 20) + (uuid "0258a324-b9c9-5b2d-9aaf-b5eb8e56c651") + ) + (segment + (start 174.4 141) + (end 175.9 142.5) + (width 0.2) + (layer "F.Cu") + (net 20) + (uuid "c02a55af-c233-5266-bc0a-bb729feb7f7c") + ) + (segment + (start 120.5 144.1) + (end 121 144.1) + (width 0.2) + (layer "F.Cu") + (net 27) + (uuid "f77b9ac6-567b-5cc0-8624-42072b58998d") + ) + (segment + (start 121 144.1) + (end 127.7 144.1) + (width 0.2) + (layer "B.Cu") + (net 27) + (uuid "3b582573-e49f-5d01-834f-9eab3444b7e3") + ) + (segment + (start 127.7 144.1) + (end 132.1 148.5) + (width 0.2) + (layer "B.Cu") + (net 27) + (uuid "d0b1d4f6-1e80-506f-bae9-b2c982ccd9d3") + ) + (segment + (start 132.1 148.5) + (end 132.1 149.1) + (width 0.2) + (layer "F.Cu") + (net 27) + (uuid "f50fb90b-6c89-52be-89b0-cd8da1d11fba") + ) + (segment + (start 132.1 149.1) + (end 133.5 150.5) + (width 0.2) + (layer "F.Cu") + (net 27) + (uuid "9baaf1a9-d59a-5b5c-8f7d-9d6348c9c8b3") + ) + (segment + (start 118.6 145.3) + (end 118 145.3) + (width 0.2) + (layer "F.Cu") + (net 28) + (uuid "1f4aa450-2072-5fca-9b39-28735387f290") + ) + (segment + (start 118 145.3) + (end 124.8 152.1) + (width 0.2) + (layer "B.Cu") + (net 28) + (uuid "168b8766-61cd-5548-95e6-02f2a86fc940") + ) + (segment + (start 124.8 152.1) + (end 128.4 152.1) + (width 0.2) + (layer "B.Cu") + (net 28) + (uuid "be3af123-ca05-5bc7-99bb-70f34965c640") + ) + (segment + (start 128.4 152.1) + (end 133.5 152.1) + (width 0.2) + (layer "F.Cu") + (net 28) + (uuid "146d8b81-ddd0-558a-835d-e06aefa2400e") + ) + (segment + (start 155.2 118.5) + (end 156.3 118.5) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "15cfc6f0-8b03-5961-942c-a6a1de786529") + ) + (segment + (start 157 118.9) + (end 157.9 119.8) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "703510f9-a623-5c41-9fc2-7bd68ba5870c") + ) + (segment + (start 157.9 119.8) + (end 174.7 119.8) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "10825896-088e-5480-941e-f65e84534c45") + ) + (segment + (start 174.7 119.8) + (end 175.6 120.7) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "e1232e41-922c-5778-ab80-62cca174f937") + ) + (segment + (start 163.7 130.2) + (end 163.6 130.2) + (width 0.2) + (layer "F.Cu") + (net 19) + (uuid "a90e9b14-6493-5fbf-a6b9-1c19fdfb7396") + ) + (segment + (start 163.6 130.2) + (end 159.1 134.7) + (width 0.2) + (layer "F.Cu") + (net 19) + (uuid "107a2665-80aa-515f-be63-93ef8f2d9701") + ) + (segment + (start 159.1 134.7) + (end 157.5 136.3) + (width 0.2) + (layer "B.Cu") + (net 19) + (uuid "3e1bc585-83de-5d16-9516-9b533f5810b5") + ) + (segment + (start 157.5 136.3) + (end 157.5 140.5) + (width 0.2) + (layer "F.Cu") + (net 19) + (uuid "4e80bff2-e121-5dab-86b2-83fb6d2bf833") + ) + (segment + (start 157.5 140.5) + (end 152.5 145.5) + (width 0.2) + (layer "F.Cu") + (net 19) + (uuid "ea10339d-879f-5a37-8d8c-b436febb02fc") + ) + (segment + (start 132.2 137.9) + (end 133.5 139.2) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "276b9f5b-7388-548e-9558-d54b224cd776") + ) + (segment + (start 133.5 139.7) + (end 133.4 139.7) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "8dda006d-8070-5950-923d-e41470ea88a0") + ) + (segment + (start 133.4 139.7) + (end 132.9 140.2) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "aab0f659-70f5-5293-bb69-5506221ca76e") + ) + (segment + (start 132.9 140.2) + (end 132.9 148.1) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "2290df37-72c4-5531-bfdd-bdef7755bbc1") + ) + (segment + (start 132.9 148.1) + (end 132.9 148.7) + (width 0.2) + (layer "B.Cu") + (net 17) + (uuid "6cbd583d-1151-56a2-adff-be746c9df51a") + ) + (segment + (start 132.9 148.7) + (end 130.3 151.3) + (width 0.2) + (layer "B.Cu") + (net 17) + (uuid "27aa5c33-4cb9-5ae4-9505-f1d90f2f2f04") + ) + (segment + (start 130.3 151.3) + (end 129.6 151.3) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "ff28f310-1dfb-5cf9-b52d-fa705d333a18") + ) + (segment + (start 130.3 151.3) + (end 128.6 153) + (width 0.2) + (layer "B.Cu") + (net 17) + (uuid "64df95a5-54d6-57c7-a1da-4a0e2e169b9d") + ) + (segment + (start 128.6 153) + (end 122.3 153) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "ded80725-4de4-57da-a7b9-60178bb6d6de") + ) + (segment + (start 122.3 153) + (end 120.7 154.6) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "92c456ae-fa38-5d05-a097-0f70dc6cc7c3") + ) + (segment + (start 156.2 115.3) + (end 156.2 132.8) + (width 0.2) + (layer "B.Cu") + (net 44) + (uuid "13b626e6-c94e-5dfd-8751-a4e30ef22af8") + ) + (segment + (start 156.2 132.8) + (end 156.2 137.9) + (width 0.2) + (layer "F.Cu") + (net 44) + (uuid "942c0b4e-de08-56e2-b409-733e0a179eb4") + ) + (segment + (start 156.2 137.9) + (end 152.5 141.6) + (width 0.2) + (layer "F.Cu") + (net 44) + (uuid "cabb15b6-6912-516e-b43a-507fda951999") + ) + (segment + (start 135.2 115.3) + (end 135 115.5) + (width 0.2) + (layer "B.Cu") + (net 38) + (uuid "0d2e5c24-471e-584e-9519-42cddd94ab10") + ) + (segment + (start 135 115.5) + (end 135 134.3) + (width 0.2) + (layer "B.Cu") + (net 38) + (uuid "b123eb27-d9f2-5634-aab4-35188d1b870a") + ) + (segment + (start 135 134.3) + (end 135.4 134.7) + (width 0.2) + (layer "F.Cu") + (net 38) + (uuid "a59442a8-e5a0-59ce-8bbe-a475caed13e0") + ) + (segment + (start 135.4 134.7) + (end 135.4 145.1) + (width 0.2) + (layer "F.Cu") + (net 38) + (uuid "66d310ea-e19b-51f1-b86d-83c57b2aac33") + ) + (segment + (start 135.4 145.1) + (end 135 145.5) + (width 0.2) + (layer "F.Cu") + (net 38) + (uuid "8cdba291-d9e2-5396-a8ec-665c62050429") + ) + (segment + (start 155.2 120.7) + (end 156.3 120.7) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "254bacd9-425d-5b82-9c77-0bd954d5460c") + ) + (segment + (start 157 121.1) + (end 163.3 127.4) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "1ee50832-50de-54e4-a53f-e059c0460887") + ) + (segment + (start 163.3 127.4) + (end 171.7 127.4) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "9da14fdb-e911-5dbf-8f7e-62bcae297648") + ) + (segment + (start 171.7 127.4) + (end 175.8 131.5) + (width 0.2) + (layer "B.Cu") + (net 14) + (uuid "9bbd0425-2940-537c-bd55-a862abd417d5") + ) + (segment + (start 152.5 147.4) + (end 153.3 147.4) + (width 0.2) + (layer "F.Cu") + (net 12) + (uuid "5080da70-4843-5193-a00b-b0a8df02ceeb") + ) + (segment + (start 153.3 147.4) + (end 154.9 147.4) + (width 0.2) + (layer "B.Cu") + (net 12) + (uuid "bad5187f-f486-5524-8ff6-57ac46d46e2f") + ) + (segment + (start 154.9 147.4) + (end 161.8 154.3) + (width 0.2) + (layer "F.Cu") + (net 12) + (uuid "22fd16f3-8d4c-507b-ac0b-62c924aadb16") + ) + (segment + (start 161.8 154.3) + (end 176.7 154.3) + (width 0.2) + (layer "F.Cu") + (net 12) + (uuid "06c6c0c4-543c-5406-bd31-e2d47874756a") + ) + (segment + (start 158.8 115.3) + (end 158.8 131.2) + (width 0.2) + (layer "B.Cu") + (net 43) + (uuid "aa3c6566-9b19-5213-be5c-199c74211496") + ) + (segment + (start 158.8 131.2) + (end 155.5 134.5) + (width 0.2) + (layer "B.Cu") + (net 43) + (uuid "8f5f7c5c-3d7b-5c36-a738-04acbf0f3a76") + ) + (segment + (start 155.5 134.5) + (end 155.5 137.4) + (width 0.2) + (layer "F.Cu") + (net 43) + (uuid "bef7dabd-1577-5685-a6bd-163b33a8e05a") + ) + (segment + (start 155.5 137.4) + (end 152.5 140.4) + (width 0.2) + (layer "F.Cu") + (net 43) + (uuid "6fa7ea73-efd4-528d-a8e2-b0cd204193cb") + ) + (segment + (start 158.7 120.7) + (end 159.8 120.7) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "38ea024d-f488-521e-b5bc-1b75ee899cdd") + ) + (segment + (start 159.8 121.1) + (end 159.8 122.9) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "83f7eade-566c-506a-8447-cf3513a3a1a8") + ) + (segment + (start 159.8 122.9) + (end 159.8 124.9) + (width 0.2) + (layer "B.Cu") + (net 13) + (uuid "90ea3c0c-6b88-582d-b5d2-16169014554d") + ) + (segment + (start 159.8 124.9) + (end 153.5 131.2) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "86bb4460-29e4-5a0e-b54d-cb29cf21cf77") + ) + (segment + (start 153.5 131.2) + (end 153.5 132.8) + (width 0.2) + (layer "B.Cu") + (net 13) + (uuid "12cb4407-acac-5c4b-9622-cc3e8fb426d2") + ) + (segment + (start 153.5 132.8) + (end 150.6 135.7) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "e48bb3e8-8828-5a2e-918d-30d330ef24fc") + ) + (segment + (start 150.6 135.7) + (end 150.6 147.6) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "93eb9be1-027a-54ae-b209-9a4720cce2cb") + ) + (segment + (start 150.6 147.6) + (end 151 148) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "4476ce28-a336-5936-8002-bda2106c8bef") + ) + (segment + (start 137.4 114.9) + (end 134.3 118) + (width 0.2) + (layer "F.Cu") + (net 37) + (uuid "ff1d2f44-01d4-5ad1-9032-4ab0879b81e8") + ) + (segment + (start 134.3 118) + (end 134.3 134.6) + (width 0.2) + (layer "B.Cu") + (net 37) + (uuid "8ce54620-6d81-5d61-ab39-6b6538e253ce") + ) + (segment + (start 134.3 134.6) + (end 136.1 136.4) + (width 0.2) + (layer "B.Cu") + (net 37) + (uuid "a22da1a3-92a6-55d0-8325-94ccc68cd70c") + ) + (segment + (start 136.1 136.4) + (end 136.1 145.6) + (width 0.2) + (layer "F.Cu") + (net 37) + (uuid "a3ac0446-eeb0-5dd5-9a5d-fb0670f24d16") + ) + (segment + (start 136.1 145.6) + (end 135 146.7) + (width 0.2) + (layer "F.Cu") + (net 37) + (uuid "66f96517-4207-5291-acba-592b587e9206") + ) + (segment + (start 129.6 147.4) + (end 132.2 147.4) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "c6e6454f-0c00-5db1-83ce-9952d95a0747") + ) + (segment + (start 132.2 147.4) + (end 133.2 147.4) + (width 0.2) + (layer "B.Cu") + (net 10) + (uuid "a3794b67-41d6-5962-a4b9-6f73d01cbff5") + ) + (segment + (start 133.2 147.4) + (end 133.6 147.8) + (width 0.2) + (layer "B.Cu") + (net 10) + (uuid "6e1e993e-a4c2-502b-a779-43f1e442707b") + ) + (segment + (start 133.6 147.8) + (end 133.6 149) + (width 0.2) + (layer "B.Cu") + (net 10) + (uuid "863fb034-4aee-5ca0-af75-f68cbe065b97") + ) + (segment + (start 133.6 149) + (end 129.8 152.8) + (width 0.2) + (layer "B.Cu") + (net 10) + (uuid "823cb44a-6f2c-5b54-b9f3-44a15653d654") + ) + (segment + (start 129.8 152.8) + (end 128.9 153.7) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "ed22119d-1fe3-5932-bcf8-9602e72e5459") + ) + (segment + (start 128.9 153.7) + (end 127.1 153.7) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "41783c7a-4f6c-5914-bd86-0d9269fd79eb") + ) + (segment + (start 127.1 153.7) + (end 126.2 154.6) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "2d2d4f25-d772-5186-b5c0-bffa09403db9") + ) + (segment + (start 133.6 149) + (end 135.6 149) + (width 0.2) + (layer "B.Cu") + (net 10) + (uuid "d1fd53b5-b815-52dc-81fb-643dc76b0a1e") + ) + (segment + (start 135.6 149) + (end 139.5 152.9) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "d99b7bcc-96df-57f7-9bce-4bfef18a9236") + ) + (segment + (start 139.5 152.9) + (end 151 152.9) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "26cda942-e766-577d-b13a-321dfff7e355") + ) + (segment + (start 152.5 152.9) + (end 153.4 152.9) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "a894ddc3-8f03-542a-9a0a-4e694543f73e") + ) + (segment + (start 154.2 152.3) + (end 155.1 151.4) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "bbfb9d6c-fb96-55ad-9142-3b314e2b6335") + ) + (segment + (start 152.5 144) + (end 153 144) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "b8fe334c-7d18-525d-96d0-c3b84a802784") + ) + (segment + (start 153 144) + (end 164 155) + (width 0.2) + (layer "B.Cu") + (net 11) + (uuid "7a931aed-7e61-5c63-bfff-095bc4b41489") + ) + (segment + (start 164 155) + (end 174.9 155) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "311b0f20-0d03-5905-a54b-e5ad572246c0") + ) + (segment + (start 174.9 155) + (end 176.7 156.8) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "fd8ca553-60d3-594d-8629-2ce561504441") + ) + (segment + (start 158.7 118.5) + (end 159.8 118.5) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "cdb9f008-67c9-57b3-88a9-b5dbe9edc81d") + ) + (segment + (start 158 118.1) + (end 157.5 117.6) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "975be321-3ae7-583f-9610-b405a08c322f") + ) + (segment + (start 157.5 117.6) + (end 156.9 118.2) + (width 0.2) + (layer "B.Cu") + (net 15) + (uuid "645974fd-b523-5936-8a7b-87b3e6b5f3bb") + ) + (segment + (start 156.9 118.2) + (end 156.9 122) + (width 0.2) + (layer "B.Cu") + (net 15) + (uuid "08513193-28e8-5e01-a1c3-5d641b1b994d") + ) + (segment + (start 156.9 122) + (end 152.5 126.4) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "79471efa-acd1-5955-badb-38f74f7d84a1") + ) + (segment + (start 152.5 126.4) + (end 152.5 131.2) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "e81f683c-6cf5-5f4c-921a-8bfeddcfb0d8") + ) + (segment + (start 152.5 131.2) + (end 152.5 132.8) + (width 0.2) + (layer "B.Cu") + (net 15) + (uuid "c0561018-c2d7-5ea3-afb1-22b0e5bc3526") + ) + (segment + (start 152.5 132.8) + (end 150.1 135.2) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "29d6a6a0-4929-559d-acd1-50af2f74a993") + ) + (segment + (start 150.1 135.2) + (end 150.1 148.4) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "df552f31-d72e-57ef-9819-b0f08a1067a3") + ) + (segment + (start 150.1 148.4) + (end 151 149.3) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "9663e849-409d-5770-b5ad-7f95ae495d14") + ) + (segment + (start 121 114.2) + (end 122.7 112.5) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "8eff64f7-108b-5f93-b719-99b74c1a4a82") + ) + (segment + (start 122.7 112.5) + (end 132.6 112.5) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "69817f7a-5c89-5579-bb55-ab115b0533af") + ) + (segment + (start 132.6 112.5) + (end 140.7 112.5) + (width 0.2) + (layer "B.Cu") + (net 8) + (uuid "d4048ba9-1e1c-579b-b737-99c48751f426") + ) + (segment + (start 140.7 112.5) + (end 140.7 113.6) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "67ef55b3-61c2-5f58-b298-728e4a1f3c99") + ) + (segment + (start 140.7 113.6) + (end 141 113.9) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "4294e896-0660-5830-b7fb-89141a56a4a4") + ) + (segment + (start 141.7 115.3) + (end 146.1 119.7) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "f34e41db-6820-5d15-9c9d-16ae590d2670") + ) + (segment + (start 146.1 119.7) + (end 146.1 126.6) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "f149a97f-656d-575c-9b30-e2a69d37602c") + ) + (segment + (start 146.1 126.6) + (end 147.3 127.8) + (width 0.2) + (layer "B.Cu") + (net 8) + (uuid "bd627e9a-58eb-5f53-9b1b-8982b1d0fd36") + ) + (segment + (start 147.3 127.8) + (end 148.2 128.7) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "7f2fed8e-a787-58c3-9e36-46107a19aa2f") + ) + (segment + (start 148.2 128.7) + (end 148.2 130.6) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "81b14176-7184-5975-bf42-b515259911da") + ) + (segment + (start 147.3 127.8) + (end 146.8 128.3) + (width 0.2) + (layer "B.Cu") + (net 8) + (uuid "fba53c47-963c-5165-893e-53cd68a88f5e") + ) + (segment + (start 146.8 128.3) + (end 146.8 132.8) + (width 0.2) + (layer "B.Cu") + (net 8) + (uuid "31b51eb6-0874-5999-8857-7821624f1ce4") + ) + (segment + (start 146.8 132.8) + (end 147.1 133.1) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "41128930-96f7-57f7-908b-1000545cc9b7") + ) + (segment + (start 147.1 133.1) + (end 147.1 137.4) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "8bae1135-ec50-5518-9f64-0bbf4c101fe8") + ) + (segment + (start 123.6 101.6) + (end 124.6 100.6) + (width 0.3) + (layer "B.Cu") + (net 1) + (uuid "2e2ca7ea-790f-50cf-8b13-b4b2f78fe07d") + ) + (segment + (start 124.6 100.6) + (end 136.8 100.6) + (width 0.3) + (layer "B.Cu") + (net 1) + (uuid "5ab23b18-c1bb-5f39-adfe-017f3f3b7d3d") + ) + (segment + (start 136.8 100.6) + (end 137.3 101.1) + (width 0.3) + (layer "B.Cu") + (net 1) + (uuid "fc3b3fa6-a354-5ff5-ab43-f75d4255290d") + ) + (segment + (start 138.9 102.7) + (end 139.5 103.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "9adbae15-d54a-5b6d-bb91-8aa5163fe0e9") + ) + (segment + (start 139.5 103.3) + (end 141.9 103.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "9f9110ff-9a99-5148-bfad-cb5e78b42f80") + ) + (segment + (start 141.9 103.3) + (end 143.1 102.1) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "cae7f7f2-04bc-5495-b27a-85665a354ca9") + ) + (segment + (start 144.6 102.2) + (end 146.3 103.9) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "914a2a0a-ad2a-5a59-8e7a-a6c68833bfe1") + ) + (segment + (start 146.3 103.9) + (end 152.7 103.9) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "ed086166-fb51-5b27-87a4-bb6f4d7168b9") + ) + (segment + (start 152.7 103.9) + (end 155.3 106.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "1478f20b-57f5-54bf-9140-849451c46e2f") + ) + (segment + (start 155.3 106.5) + (end 158.2 106.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "6bde6010-af2b-550c-aa89-e0771b0a9adb") + ) + (segment + (start 158.2 106.5) + (end 158.3 106.4) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "a649bc7b-ef83-56f3-b9e7-30a942c31364") + ) + (segment + (start 158.3 106.4) + (end 158.3 102.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "ec127f9f-be79-5a85-b365-7d8bf5790971") + ) + (segment + (start 158.2 106.5) + (end 160.5 108.8) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "92216114-db24-5b25-99a9-95eb11b349f0") + ) + (segment + (start 160.5 108.8) + (end 160.5 115.2) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "c8060f35-ff70-5610-a0e3-7bfd60ca30d6") + ) + (segment + (start 160.5 115.2) + (end 161.4 116.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e28c0e0a-2a45-5e00-95ff-f6fb62de4b01") + ) + (segment + (start 161.4 116.1) + (end 161.4 118.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "ac259615-f370-5910-8102-dc416e3262dd") + ) + (segment + (start 162.2 118.9) + (end 162.4 119.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "793e136d-c23c-5eed-a55b-f0078a3df191") + ) + (segment + (start 162.4 119.1) + (end 162.8 119.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "61106603-a3f5-5f03-b6d4-efc46576a21c") + ) + (segment + (start 162.8 119.1) + (end 162.8 120.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "374e5750-5b79-5121-b22e-eb48434bd8a2") + ) + (segment + (start 162.8 120.5) + (end 162.2 120.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "256b50f2-d454-5d1c-aa4f-ffbe777ade23") + ) + (segment + (start 161.4 121.1) + (end 161.4 124.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "5e1736c2-adea-53ad-a8a7-6e332f484e42") + ) + (segment + (start 161.4 124.5) + (end 161.4 126.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "0061606c-ebc3-544c-afeb-8ca24a199eae") + ) + (segment + (start 161.4 126.5) + (end 161.4 128.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "f369e2df-6e04-5642-bfcb-df43858526b4") + ) + (segment + (start 161.4 128.7) + (end 162 128.7) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "3c721300-59fa-5f65-a533-621956f2c243") + ) + (segment + (start 162 128.7) + (end 163.2 129.9) + (width 0.3) + (layer "B.Cu") + (net 1) + (uuid "2c3955ba-1f91-571e-b3c9-887d1e819867") + ) + (segment + (start 163.2 129.9) + (end 165.7 129.9) + (width 0.3) + (layer "B.Cu") + (net 1) + (uuid "99394bd1-9d2b-5fad-9b67-b455397507df") + ) + (segment + (start 165.7 129.9) + (end 165.7 129.7) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "2c28fa74-cc5e-5abf-afff-b2665c7f2ebd") + ) + (segment + (start 165.7 129.7) + (end 165.2 129.2) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "57378e5a-2689-54ac-849b-259f441e6ff2") + ) + (segment + (start 165.2 129.2) + (end 165 129.2) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "a1ba1550-8481-525e-b468-d2c5843e43ca") + ) + (segment + (start 164.4 129.9) + (end 164.4 131.8) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "b06d923d-44c5-55be-893b-1a6c290a754e") + ) + (segment + (start 164.4 131.8) + (end 164.4 131.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "44ea690c-3525-5efc-8b2e-54c0b00dec41") + ) + (segment + (start 164.4 131.8) + (end 163.5 132.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "10248854-cf7e-5e50-af04-40ddc9d0b832") + ) + (segment + (start 163.5 132.7) + (end 163.5 138.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "c65022a1-0494-510d-b7b5-42f4a86a298e") + ) + (segment + (start 161.9 138.5) + (end 160.3 138.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "f30a3fc2-0d61-5862-85e8-d874f3cb57b4") + ) + (segment + (start 161.9 139.9) + (end 161.5 139.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "26754990-744b-52d6-a10b-2ac182a476c1") + ) + (segment + (start 161.5 139.9) + (end 161.3 140.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "306fc143-a22b-56fe-929c-d24a5efe557c") + ) + (segment + (start 161.3 140.1) + (end 160 141.4) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "abc77d39-819c-570d-aabf-02a2786da9cb") + ) + (segment + (start 160 141.4) + (end 160 141.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "785023e2-9791-557b-a25e-2ae4f90c013a") + ) + (segment + (start 160 141.7) + (end 160 142.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "06b2c6a8-2479-5732-9426-7d6d85386ab7") + ) + (segment + (start 160 141.7) + (end 160 141.8) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "4fbaf0cf-909b-558d-898e-ea0b90df4b66") + ) + (segment + (start 160 141.8) + (end 157.8 144) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "95377aa4-1a46-5585-a50a-a89f495044b2") + ) + (segment + (start 157.8 144) + (end 154.2 144) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "5b680066-5243-5fe3-bf46-69c789aee17d") + ) + (segment + (start 154.2 144) + (end 149.5 139.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "d9cda1c4-4fe9-570b-b3b2-6216ee189e75") + ) + (segment + (start 149.5 139.3) + (end 149.4 139.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "b331a679-3a90-586f-8cb6-8efdca529bdc") + ) + (segment + (start 149.4 139.3) + (end 148.9 138.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e49e8324-9647-5d67-81b8-ba4422e6a264") + ) + (segment + (start 153 142.8) + (end 152.1 143.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "bf207566-9a6a-561f-9751-1ca8b7105138") + ) + (segment + (start 152.1 143.7) + (end 152.1 147.4) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "8a303a77-7c69-5e34-a386-b22ee17c38cd") + ) + (segment + (start 152.1 147.4) + (end 153.8 149.1) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "ac83d0ec-d9b4-5699-be69-39f3e614f12a") + ) + (segment + (start 153.8 149.1) + (end 154.4 149.1) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "160144a7-667b-57ad-8714-4d3e22d7792b") + ) + (segment + (start 154.4 149.1) + (end 156.5 151.2) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "d1a1037f-e8e0-5212-9a8d-86372435780f") + ) + (segment + (start 156.5 151.2) + (end 156.5 152.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "9a304049-5c50-5b2a-a3c4-2b92bcd618a9") + ) + (segment + (start 156.5 152.6) + (end 157.1 153.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "f61651c8-854a-5287-8961-2a4b6d30d9af") + ) + (segment + (start 156.5 152.6) + (end 155.8 152.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "9d51d52c-c6b7-50d6-8a44-aa57193520b6") + ) + (segment + (start 155 153.1) + (end 155 153.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "6a7b746a-fbd7-5be5-b497-82c6bf5e23dc") + ) + (segment + (start 155.4 154.6) + (end 156 154.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "f753e346-405c-5979-9d57-b535553c5f24") + ) + (segment + (start 156 154.6) + (end 154.8 154.6) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "b1b406f4-244e-51cd-867a-87fad5a1cfe8") + ) + (segment + (start 154.8 154.6) + (end 153.6 155.8) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "47942f1f-41eb-5792-b023-5454f7234a66") + ) + (segment + (start 153.6 155.8) + (end 152.5 155.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "adfcba9f-018c-5ac6-aa26-02ee7d6c5cba") + ) + (segment + (start 152.1 146.7) + (end 149.4 146.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "7b54a49f-843e-5e50-8350-b8a1c97ec248") + ) + (segment + (start 149.4 146.7) + (end 146.3 146.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e4045cea-fc1e-5ff7-96f0-2f9447e5a0f4") + ) + (segment + (start 145.9 147.1) + (end 145.9 147.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d1c10133-71de-57ce-9cf3-467201127552") + ) + (segment + (start 145.9 148.5) + (end 145.9 149.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d91a5707-6e4a-5c27-a0da-1be8cefa0d12") + ) + (segment + (start 160.5 115.2) + (end 159 116.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "370bc8de-9c18-5041-b738-37d967b63cf6") + ) + (segment + (start 159 116.7) + (end 154.3 116.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d9f7f3d7-f34e-5f59-b808-26bec971125e") + ) + (segment + (start 154.3 116.7) + (end 153.3 116.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "78262d37-acd7-5ea6-992f-d2b81511bbdd") + ) + (segment + (start 153.3 116.7) + (end 152.7 117.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "50274737-34b1-5082-86fc-0a539d5dad01") + ) + (segment + (start 152.7 117.3) + (end 150.2 119.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "904ef6df-8cd0-563c-b097-c5502939a96f") + ) + (segment + (start 165.7 129.9) + (end 170.1 134.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "8971faaf-e585-57ec-9714-a1e846dee819") + ) + (segment + (start 170.1 134.3) + (end 175.6 134.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "5c955058-d6ac-5d40-a084-45742a1087dd") + ) + (segment + (start 176.9 133.8) + (end 178.1 132.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "7e607976-e093-5b57-8340-164642631c42") + ) + (segment + (start 178.1 132.6) + (end 178.1 125.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "ce4fd70d-3e7e-5a3b-ac65-4f1ef9476af4") + ) + (segment + (start 178.1 125.5) + (end 176.9 124.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "efc9c532-8ba0-59ba-8679-522110f3b8e5") + ) + (segment + (start 176.9 135.4) + (end 178.1 136.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e60cb93c-a16e-5ee3-a7fd-70095466ed38") + ) + (segment + (start 178.1 136.6) + (end 178.1 143.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "dfd4048f-8d5e-5a02-a2da-db20761ad5fd") + ) + (segment + (start 178.1 143.7) + (end 176.9 144.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "285c0102-e107-505a-8323-635c47322a0b") + ) + (segment + (start 176.9 146.5) + (end 178.9 148.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "8c8fc83d-6c4b-529c-b42f-1f08943e4c79") + ) + (segment + (start 178.9 148.5) + (end 178.9 157.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "93307091-8dc8-57d6-ab3e-31d4bd95c4d9") + ) + (segment + (start 178.9 157.9) + (end 177.9 158.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "80a7b027-e69b-5e37-87f7-bad18b5df340") + ) + (segment + (start 142.7 149.9) + (end 140.9 149.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d07b8d0a-13c8-54ea-8743-2b9cee4ad7f8") + ) + (segment + (start 140.9 149.9) + (end 139.2 151.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d230ba69-3f2c-561c-84bd-d72a29cedaa8") + ) + (segment + (start 139.2 151.6) + (end 138.2 152.6) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "5be97f01-72d7-530c-b456-ec75c64557fd") + ) + (segment + (start 138.2 152.6) + (end 135 155.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "3f6385d7-09af-5a43-8137-e903de7c91e9") + ) + (segment + (start 133.5 155.6) + (end 129.8 155.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "543236d3-7ccc-5972-9f6c-1e5989cb4775") + ) + (segment + (start 129.8 155.6) + (end 129.6 155.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "f146b719-30e3-5567-a557-febd59cd11e6") + ) + (segment + (start 128.8 155.8) + (end 128.2 156.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "978b2f8e-8363-5c5d-bf08-7bedf537dc3c") + ) + (segment + (start 128.2 156.4) + (end 125.1 156.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "ce632f18-2707-5b73-b162-daba8a068655") + ) + (segment + (start 125.1 156.4) + (end 124.1 155.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "989a9c04-066f-589b-86fd-1b7f508680aa") + ) + (segment + (start 139.2 151.6) + (end 139.2 151.4) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "35b1b1c3-797d-5bfc-a6f1-3bcb720bdff8") + ) + (segment + (start 139.2 151.4) + (end 129.5 141.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "ffbaf009-3bfb-5a80-98c9-50389793753b") + ) + (segment + (start 129.5 141.7) + (end 128 141.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "381c8b08-d4d9-5425-bdb8-bb11cbf3a500") + ) + (segment + (start 128 141.7) + (end 127.6 141.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "0f531cb9-276e-534c-b311-9e7977bbe72e") + ) + (segment + (start 127.6 141.7) + (end 127.4 141.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "32f5dc62-a94b-5d3f-9c40-5ea918f846ad") + ) + (segment + (start 127.6 141.7) + (end 127.6 140.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "c4cc1def-6016-596f-91bb-4fa2063ea192") + ) + (segment + (start 126.6 141.8) + (end 125.9 141.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "2f5056ee-6e98-5b8f-8cf9-820bb175551c") + ) + (segment + (start 125.9 141.1) + (end 123.5 141.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "df6094a8-8562-5751-b47c-215a1b7e52f6") + ) + (segment + (start 123.5 141.1) + (end 122.5 140.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "691d9c8c-e7c1-50a7-b507-a2d0557522d0") + ) + (segment + (start 121.4 140.5) + (end 119.6 142.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "3a8d92dd-4758-58e4-855e-5ccdfde315f9") + ) + (segment + (start 121.4 138.7) + (end 121.4 136.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "475e194d-3ffe-55a2-bcd2-bb48f78b445c") + ) + (segment + (start 121.4 136.7) + (end 120.8 136.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "64389be0-21b1-55d4-b124-eea03109aa63") + ) + (segment + (start 118.6 142.7) + (end 112.7 142.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "4253b04c-189a-5ce3-a628-22f9f87639a0") + ) + (segment + (start 112.7 143.2) + (end 113 143.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "f025878a-a7d8-5fb3-aa49-7c64d5eb63ab") + ) + (segment + (start 113 143.5) + (end 113.2 143.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "c550e6fb-e7a9-55c0-8365-124e9dba6447") + ) + (segment + (start 113.2 143.5) + (end 113.2 144.9) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "42875039-2d35-5b97-8072-71527ca2972b") + ) + (segment + (start 113.2 144.9) + (end 112.7 145.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "3b3e1dc1-78a1-557d-bb48-7b6b257bc1a8") + ) + (segment + (start 113.2 143.5) + (end 110.4 140.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "1df5b6bf-3775-504c-9d87-bd6ca0143f35") + ) + (segment + (start 110.4 140.7) + (end 109.4 140.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "504e3caf-8a9d-5f8e-bf20-24996347b138") + ) + (segment + (start 109.4 140.7) + (end 109.3 140.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "5fa81f3e-59d4-5105-8e42-40aacc8a6243") + ) + (segment + (start 112 146.2) + (end 112 146.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "4809806f-47fb-5a88-be3d-d005f3e91a97") + ) + (segment + (start 112 146.8) + (end 111.1 147.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "a978aabb-b182-5db5-aa1c-a8e74b7b0430") + ) + (segment + (start 111.1 147.7) + (end 110.3 148.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "fa34e563-a65b-527f-8382-cf476e0f5f01") + ) + (segment + (start 110.3 148.5) + (end 109.7 148.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "3ebf6cc0-7ae9-545e-9be4-11a665a17c65") + ) + (segment + (start 109.7 148.5) + (end 109.1 147.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "132bc86f-89f8-51e4-a6ba-6ec550b95a99") + ) + (segment + (start 109.1 147.9) + (end 109.1 147.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "5de05d3b-d460-5fce-9fb0-92dfdc815a80") + ) + (segment + (start 109.1 147.4) + (end 109.3 147.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "2f98b844-1334-5a97-a691-0e4669809c3c") + ) + (segment + (start 109.1 147.9) + (end 107.3 147.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "cdfd940d-50ec-50bc-a131-24e11e47c732") + ) + (segment + (start 105.5 148.3) + (end 103.1 148.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "a8d63f08-0e5e-5e93-a18f-3a783f1212c3") + ) + (segment + (start 109.3 140.8) + (end 108.4 139.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "6ccea88b-c083-5780-8acc-d7747ea887f3") + ) + (segment + (start 108.4 139.9) + (end 107.5 139.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "71590eaf-3b03-5901-ad68-352938ce5cec") + ) + (segment + (start 105.5 139.7) + (end 103.1 139.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "b85fd822-7924-5e60-83e3-3b8283edd246") + ) + (segment + (start 107.2 139.2) + (end 107.6 138.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e28e9dc2-9e49-510d-bb71-29072607ff44") + ) + (segment + (start 107.6 138.8) + (end 107.6 127.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "46f4b087-4697-5083-9c61-c26045b74f8a") + ) + (segment + (start 107.6 127.6) + (end 106.6 126.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "11dc0957-d238-5950-8766-3ddee544273d") + ) + (segment + (start 128 138.7) + (end 128 138.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "b6d80349-9c5a-5873-9528-7b9313bd9d61") + ) + (segment + (start 128 138.1) + (end 129.2 136.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "360ce7c3-80db-5fcc-af9e-5115d6c1837c") + ) + (segment + (start 129.2 136.9) + (end 132.3 133.8) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "a5088139-5f88-5f94-8421-919f53b6471f") + ) + (segment + (start 132.3 133.8) + (end 132.3 130.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "23311d05-abcf-5485-bed1-42a3160fc3f8") + ) + (segment + (start 132.3 130.7) + (end 132.8 130.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "356ece5c-dd30-5bde-8b1c-7fd78ec02c7e") + ) + (segment + (start 133.6 129.6) + (end 133.6 129.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e82caabe-008c-5d93-95a1-57a8dc6e8964") + ) + (segment + (start 133.6 129.5) + (end 134.2 128.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "2808293f-e004-531c-a87b-e93d5ac8247f") + ) + (segment + (start 134.2 128.9) + (end 136.1 128.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "1396f1f0-956f-525c-a4cd-27f0a07c458d") + ) + (segment + (start 136.1 128.9) + (end 136.8 129.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "3d3a1afb-b33b-5a18-ae71-fe05ae176749") + ) + (segment + (start 134.2 128.9) + (end 127.5 122.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "a9dec61a-46fb-5b41-b05e-ae5645feadae") + ) + (via + (at 106.15 143.25) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 29) + (uuid "e8b4f478-003e-54c2-a6eb-415b23a87de8") + ) + (via + (at 106.15 144.25) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 29) + (uuid "cd952857-296f-5568-b61d-518769690fe2") + ) + (via + (at 110 147.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 29) + (uuid "28dfac58-0876-52fd-9051-497ae7f72c27") + ) + (via + (at 109.3 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 31) + (uuid "379b06e1-49bd-5264-969e-5697c1a7e590") + ) + (via + (at 110.6 146.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 31) + (uuid "cdda671c-1f9f-5ae3-b166-78adb48d5c06") + ) + (via + (at 117.9 103.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 33) + (uuid "d52f3ea4-42be-5d57-825b-328e62802e77") + ) + (via + (at 120.7 103.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 33) + (uuid "c531cccc-16d5-5160-a725-2bec50b687c1") + ) + (via + (at 117.8 105.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 34) + (uuid "35d06690-f616-59c3-84d7-11fc2bfaa59c") + ) + (via + (at 119.8 105.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 34) + (uuid "9695c949-d83f-52e7-8185-5eeffc4645c7") + ) + (via + (at 106 106.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 36) + (uuid "8881020d-2900-5c69-ae97-0b8e2e82674d") + ) + (via + (at 109.9 102.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 36) + (uuid "3c9cb6e3-30c3-5b93-aea2-d7af71a637b8") + ) + (via + (at 156.6 104.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 40) + (uuid "8e60fe78-751e-5e2c-a1c3-75354593d804") + ) + (via + (at 117.7 137.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 4) + (uuid "1197a799-8052-5f4f-918c-aa23732604a0") + ) + (via + (at 124.2 137.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 4) + (uuid "036ff089-e8ae-5a3c-8595-132850d9d8f0") + ) + (via + (at 139.8 130.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "1e3658c8-aeb6-56b0-ba8f-3ccb111b661c") + ) + (via + (at 136.5 133.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "01a77f9b-0c1a-5b45-a333-82d0db3c0050") + ) + (via + (at 147.5 129.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "23eb45a2-06a4-53ea-8304-b88a8767994c") + ) + (via + (at 159.1 141.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "adceac3f-9b87-563c-8fc5-a78abaa7854c") + ) + (via + (at 157.5 143.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "18b54e1d-e52b-5d56-8bc8-8aa22a230710") + ) + (via + (at 154.1 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "417249ae-852c-501f-a356-566cd80d19ed") + ) + (via + (at 153.2 153.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "1a956dda-569e-5cc8-a71e-daebd668e27f") + ) + (via + (at 158 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "a8b3e5a8-4863-55ec-8c2b-7e54746f8874") + ) + (via + (at 139.9 129.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 26) + (uuid "9b3c3c7f-459e-593b-9c0d-59f46cc26de2") + ) + (via + (at 139.8 132.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 26) + (uuid "f58d0f9c-4e28-521b-bce3-67fb233eedb5") + ) + (via + (at 135.7 130.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 21) + (uuid "d97965d2-3a04-5f9a-a028-557e209d8da9") + ) + (via + (at 135.8 132.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 21) + (uuid "f64b4351-6bed-5ddb-a06c-fc63901c337c") + ) + (via + (at 128.3 148.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 24) + (uuid "80c84275-312c-5677-af0f-c9048bcd2c07") + ) + (via + (at 129.9 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 24) + (uuid "a43f0f97-f108-573d-9d1f-7d300a3703f3") + ) + (via + (at 123 146.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 9) + (uuid "01978fa6-c602-52b4-8de2-80ef019ed444") + ) + (via + (at 128.7 146.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 9) + (uuid "77bf02df-a605-57cc-a7fc-8738a00fadb1") + ) + (via + (at 127.1 151.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 9) + (uuid "5af81583-6926-5409-905b-319cd63c6717") + ) + (via + (at 121 144.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 27) + (uuid "3b20f73c-051c-58eb-bf72-f94f3330263b") + ) + (via + (at 132.1 148.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 27) + (uuid "429a5a88-81c6-530f-ae24-54d87f2915a6") + ) + (via + (at 118 145.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 28) + (uuid "f375a0d3-bffa-5431-a010-dda92a2d8e37") + ) + (via + (at 128.4 152.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 28) + (uuid "c27eb838-dc73-52b9-a1ab-90f56e165ff2") + ) + (via + (at 159.1 134.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 19) + (uuid "943fef79-b496-5d32-b161-ff75a64f2778") + ) + (via + (at 157.5 136.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 19) + (uuid "c093e4bb-3f6a-5d26-8cb0-69be775c21e1") + ) + (via + (at 132.9 148.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 17) + (uuid "17447105-c604-5fc5-8ee8-3a88b310f344") + ) + (via + (at 130.3 151.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 17) + (uuid "082da55d-2f64-5ebc-8fb5-e5983d028588") + ) + (via + (at 128.6 153) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 17) + (uuid "ae1e9329-fc68-5628-8920-2ab3c2953188") + ) + (via + (at 156.2 132.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 44) + (uuid "be65506e-edae-512d-baa9-d24b8622934b") + ) + (via + (at 135 134.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 38) + (uuid "f5345347-523b-53f2-b358-16f47458b04a") + ) + (via + (at 171.7 127.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 14) + (uuid "e83af8c6-1720-59ab-832a-2fcf628535e1") + ) + (via + (at 153.3 147.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 12) + (uuid "9439edb5-0fac-5fcb-9371-cb7d2edcb828") + ) + (via + (at 154.9 147.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 12) + (uuid "4ad4878c-5be6-53b9-875c-4b2671680a2b") + ) + (via + (at 155.5 134.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 43) + (uuid "8bd79c86-03bb-5ede-958e-3825209bf388") + ) + (via + (at 159.8 122.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 13) + (uuid "7eff971c-6b9c-5a41-abea-d1ff85fa23e4") + ) + (via + (at 159.8 124.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 13) + (uuid "6937d5c7-4327-529c-ae4d-abbd03c93617") + ) + (via + (at 153.5 131.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 13) + (uuid "46776204-523c-5f1a-a917-61aac5a2f3fd") + ) + (via + (at 153.5 132.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 13) + (uuid "6be282d5-7c4d-51e4-a23a-33111d130ec7") + ) + (via + (at 134.3 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 37) + (uuid "761c6839-364a-5968-86b2-7d37644ad5dd") + ) + (via + (at 136.1 136.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 37) + (uuid "0ee0757a-6c58-5f23-ad5a-1991051be312") + ) + (via + (at 132.2 147.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 10) + (uuid "a2f4c5e8-65ba-590b-94a6-c420554fb099") + ) + (via + (at 129.8 152.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 10) + (uuid "37e8b737-da0f-555a-9774-f117e7d53c9f") + ) + (via + (at 135.6 149) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 10) + (uuid "ed211351-c8db-5b85-89f3-395f5c75bce9") + ) + (via + (at 153 144) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 11) + (uuid "ba29a340-c0fc-5ba6-b714-18b9c2b95482") + ) + (via + (at 164 155) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 11) + (uuid "678aba7e-e594-5fce-992b-ea24dee0c62c") + ) + (via + (at 157.5 117.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 15) + (uuid "df224a9b-2a2c-5784-a1c0-3af484845f8c") + ) + (via + (at 156.9 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 15) + (uuid "cf269b75-39a4-5236-9644-5d22cf055e9f") + ) + (via + (at 152.5 131.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 15) + (uuid "6a1a2837-2702-5823-b225-c5164d7564cb") + ) + (via + (at 152.5 132.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 15) + (uuid "347eb386-9df3-53e5-b59b-7f16ea5a73d4") + ) + (via + (at 132.6 112.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "361f5ccc-e2db-5076-ba81-27e0a28a727b") + ) + (via + (at 140.7 112.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "e99c6735-2255-56f0-bae9-200137c38edc") + ) + (via + (at 146.1 126.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "512abf3a-ccc6-58d8-9375-2baf6cf66875") + ) + (via + (at 147.3 127.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "fdcbd503-aba2-561e-848d-d2266319d41f") + ) + (via + (at 146.8 132.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "dcb7b645-f11d-5d13-b013-0638a39dbf10") + ) + (via + (at 152.7 103.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "396e1725-3146-5f78-86d9-28d392c4d49d") + ) + (via + (at 158.2 106.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "144968ed-49a7-5475-b29d-38a65cd6cc9d") + ) + (via + (at 160.5 115.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "335533ae-edec-525a-84fd-38202f4469a6") + ) + (via + (at 162.8 119.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "399175f8-0c17-50a3-beb4-9d3c77d910f2") + ) + (via + (at 162.8 120.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e7febb03-5373-5c5c-931b-8b12dfb0d3c1") + ) + (via + (at 161.4 124.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4eb9f87a-bd81-5d15-ae86-beb0bff63e9a") + ) + (via + (at 161.4 126.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "da8d0faf-8fa1-50b6-9de5-42592b130287") + ) + (via + (at 162 128.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "50f46a03-7806-5d22-a34f-e6482bf06fb6") + ) + (via + (at 165.7 129.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "824a2806-6954-5316-86d8-26a35f517758") + ) + (via + (at 164.4 131.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c44ee8ee-ea32-5561-be7b-732bc3f8b09b") + ) + (via + (at 161.3 140.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "8681bc84-4b68-5560-a5f4-6f8d20934ef9") + ) + (via + (at 160 141.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "40995dbe-9b90-59e3-8622-e986af1975b2") + ) + (via + (at 149.4 139.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "acf6338c-5f7e-51de-821c-241561593151") + ) + (via + (at 156.5 151.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "704d3fdc-e2e3-5064-8852-8346ca30036d") + ) + (via + (at 156 154.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "bf9eb685-d1e5-53c0-b5af-d438837a7c3a") + ) + (via + (at 153.6 155.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f8364253-412b-5b7f-8ec2-fe354ccbd2a6") + ) + (via + (at 149.4 146.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2048d035-4459-53ce-b231-f49258089fd9") + ) + (via + (at 154.3 116.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4d3b8cc7-a57a-5588-b0eb-1fdcce2f61e1") + ) + (via + (at 152.7 117.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1820f89e-3913-5392-bf51-acb87d7c6fbc") + ) + (via + (at 139.2 151.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7747e42b-e3c5-52d8-84e4-287ba6cbfd42") + ) + (via + (at 138.2 152.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e8c1a093-0805-5178-b278-e53504288e4b") + ) + (via + (at 128 141.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "45a63c22-51d6-5cb4-8f0a-f26f1034e99e") + ) + (via + (at 113.2 143.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9e758d79-ee33-5e0a-839b-a89eede17e55") + ) + (via + (at 113.2 144.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5ebb4322-c705-58aa-b539-0ee3f5ecba9c") + ) + (via + (at 110.4 140.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "cdcd7ee8-b9a6-5ffd-835c-91a0f07d4d01") + ) + (via + (at 111.1 147.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "16529793-0caa-5a90-aba9-19c057621008") + ) + (via + (at 109.7 148.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "598b7721-9b84-5807-abf5-8d63717a5975") + ) + (via + (at 129.2 136.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "44743d2c-de96-5642-a9cf-eadb69ba12eb") + ) + (via + (at 132.3 130.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4ca9acf9-3a20-55e8-9e6a-1e4492d7dc17") + ) + (zone + (net 0) + (net_name "") + (layers "F.Cu" "B.Cu") + (uuid "a10a04f8-4cd2-56bc-a687-e3e020266820") + (name "ANTENNA") + (hatch edge 0.5) + (connect_pads + (clearance 0) + ) + (min_thickness 0.25) + (filled_areas_thickness no) + (keepout + (tracks not_allowed) + (vias not_allowed) + (pads not_allowed) + (copperpour not_allowed) + (footprints allowed) + ) + (placement + (enabled no) + (sheetname "") + ) + (fill + (thermal_gap 0.5) + (thermal_bridge_width 0.5) + ) + (polygon + (pts + (xy 118.75 156.9) + (xy 167.25 156.9) + (xy 167.25 163.34) + (xy 118.75 163.34) + ) + ) + ) + (zone + (net 1) + (net_name "/GND") + (layer "B.Cu") + (uuid "45fb0992-ee97-55bf-9050-21d83388e43c") + (name "GND_B") + (hatch edge 0.5) + (connect_pads yes + (clearance 0.3) + ) + (min_thickness 0.25) + (filled_areas_thickness no) + (fill yes + (thermal_gap 0.5) + (thermal_bridge_width 0.5) + ) + (polygon + (pts + (xy 100.25 100.25) + (xy 179.75 100.25) + (xy 179.75 163.09) + (xy 100.25 163.09) + ) + ) + (filled_polygon + (layer "B.Cu") + (pts + (xy 100.75 100.55) + (xy 100.75 100.65) + (xy 100.65 100.65) + (xy 100.65 100.75) + (xy 100.55 100.75) + (xy 100.55 162.55) + (xy 100.65 162.55) + (xy 100.65 162.65) + (xy 100.75 162.65) + (xy 100.75 162.75) + (xy 118.35 162.75) + (xy 118.35 162.65) + (xy 118.45 162.65) + (xy 118.45 162.55) + (xy 118.55 162.55) + (xy 118.55 156.65) + (xy 167.45 156.65) + (xy 167.45 162.55) + (xy 167.55 162.55) + (xy 167.55 162.65) + (xy 167.65 162.65) + (xy 167.65 162.75) + (xy 179.25 162.75) + (xy 179.25 162.65) + (xy 179.35 162.65) + (xy 179.35 162.55) + (xy 179.45 162.55) + (xy 179.45 151.05) + (xy 178.75 151.05) + (xy 178.75 152.95) + (xy 178.65 152.95) + (xy 178.65 153.15) + (xy 178.45 153.15) + (xy 178.45 153.25) + (xy 178.35 153.25) + (xy 178.35 153.35) + (xy 178.25 153.35) + (xy 178.25 153.45) + (xy 178.15 153.45) + (xy 178.15 153.55) + (xy 178.25 153.55) + (xy 178.25 153.65) + (xy 178.35 153.65) + (xy 178.35 153.75) + (xy 178.45 153.75) + (xy 178.45 153.85) + (xy 178.55 153.85) + (xy 178.55 153.95) + (xy 178.65 153.95) + (xy 178.65 154.25) + (xy 178.75 154.25) + (xy 178.75 154.85) + (xy 178.65 154.85) + (xy 178.65 155.05) + (xy 178.55 155.05) + (xy 178.55 155.25) + (xy 178.45 155.25) + (xy 178.45 155.35) + (xy 178.35 155.35) + (xy 178.35 155.45) + (xy 178.25 155.45) + (xy 178.25 155.55) + (xy 178.15 155.55) + (xy 178.15 155.65) + (xy 178.05 155.65) + (xy 178.05 155.75) + (xy 177.95 155.75) + (xy 177.95 155.85) + (xy 178.05 155.85) + (xy 178.05 155.95) + (xy 178.15 155.95) + (xy 178.15 156.05) + (xy 178.25 156.05) + (xy 178.25 156.15) + (xy 178.35 156.15) + (xy 178.35 156.25) + (xy 178.45 156.25) + (xy 178.45 156.35) + (xy 178.55 156.35) + (xy 178.55 156.55) + (xy 178.65 156.55) + (xy 178.65 156.85) + (xy 178.75 156.85) + (xy 178.75 157.35) + (xy 178.65 157.35) + (xy 178.65 157.65) + (xy 178.55 157.65) + (xy 178.55 157.75) + (xy 178.45 157.75) + (xy 178.45 157.95) + (xy 178.35 157.95) + (xy 178.35 158.05) + (xy 178.15 158.05) + (xy 178.15 158.15) + (xy 178.05 158.15) + (xy 178.05 158.25) + (xy 177.65 158.25) + (xy 177.65 158.35) + (xy 177.35 158.35) + (xy 177.35 158.25) + (xy 176.95 158.25) + (xy 176.95 158.15) + (xy 176.85 158.15) + (xy 176.85 158.05) + (xy 176.65 158.05) + (xy 176.65 157.95) + (xy 176.55 157.95) + (xy 176.55 157.75) + (xy 176.45 157.75) + (xy 176.45 157.65) + (xy 176.35 157.65) + (xy 176.35 157.35) + (xy 176.25 157.35) + (xy 176.25 156.85) + (xy 176.35 156.85) + (xy 176.35 156.55) + (xy 176.45 156.55) + (xy 176.45 156.35) + (xy 176.55 156.35) + (xy 176.55 156.25) + (xy 176.65 156.25) + (xy 176.65 156.15) + (xy 176.75 156.15) + (xy 176.75 156.05) + (xy 176.85 156.05) + (xy 176.85 155.95) + (xy 176.95 155.95) + (xy 176.95 155.85) + (xy 177.05 155.85) + (xy 177.05 155.75) + (xy 176.95 155.75) + (xy 176.95 155.65) + (xy 176.85 155.65) + (xy 176.85 155.55) + (xy 176.75 155.55) + (xy 176.75 155.45) + (xy 176.65 155.45) + (xy 176.65 155.35) + (xy 176.55 155.35) + (xy 176.55 155.25) + (xy 176.45 155.25) + (xy 176.45 155.05) + (xy 176.35 155.05) + (xy 176.35 154.85) + (xy 176.25 154.85) + (xy 176.25 154.65) + (xy 164.65 154.65) + (xy 164.65 155.35) + (xy 164.55 155.35) + (xy 164.55 155.45) + (xy 164.45 155.45) + (xy 164.45 155.55) + (xy 164.35 155.55) + (xy 164.35 155.65) + (xy 163.65 155.65) + (xy 163.65 155.55) + (xy 163.55 155.55) + (xy 163.55 155.45) + (xy 163.45 155.45) + (xy 163.45 155.35) + (xy 163.35 155.35) + (xy 115.95 155.35) + (xy 115.95 156.25) + (xy 115.85 156.25) + (xy 115.85 156.55) + (xy 115.75 156.55) + (xy 115.75 156.75) + (xy 115.65 156.75) + (xy 115.65 156.95) + (xy 115.55 156.95) + (xy 115.55 157.05) + (xy 115.45 157.05) + (xy 115.45 157.15) + (xy 115.35 157.15) + (xy 115.35 157.25) + (xy 115.25 157.25) + (xy 115.25 157.35) + (xy 115.15 157.35) + (xy 115.15 157.45) + (xy 114.95 157.45) + (xy 114.95 157.55) + (xy 114.75 157.55) + (xy 114.75 157.65) + (xy 114.55 157.65) + (xy 114.55 157.75) + (xy 113.45 157.75) + (xy 113.45 157.65) + (xy 113.15 157.65) + (xy 113.15 157.55) + (xy 112.95 157.55) + (xy 112.95 157.45) + (xy 112.85 157.45) + (xy 112.85 157.35) + (xy 112.65 157.35) + (xy 112.65 157.25) + (xy 112.55 157.25) + (xy 112.55 157.15) + (xy 112.45 157.15) + (xy 112.45 157.05) + (xy 112.35 157.05) + (xy 112.35 156.85) + (xy 112.25 156.85) + (xy 112.25 156.65) + (xy 112.15 156.65) + (xy 112.15 156.45) + (xy 112.05 156.45) + (xy 112.05 155.95) + (xy 111.95 155.95) + (xy 111.95 155.65) + (xy 112.05 155.65) + (xy 112.05 155.15) + (xy 112.15 155.15) + (xy 112.15 154.95) + (xy 112.25 154.95) + (xy 112.25 154.75) + (xy 112.35 154.75) + (xy 112.35 154.55) + (xy 112.45 154.55) + (xy 112.45 154.45) + (xy 112.55 154.45) + (xy 112.55 154.35) + (xy 112.65 154.35) + (xy 112.65 154.25) + (xy 112.85 154.25) + (xy 112.85 154.15) + (xy 112.95 154.15) + (xy 112.95 154.05) + (xy 113.15 154.05) + (xy 113.15 153.95) + (xy 113.45 153.95) + (xy 113.45 153.85) + (xy 114.55 153.85) + (xy 114.55 153.95) + (xy 114.75 153.95) + (xy 114.75 154.05) + (xy 114.95 154.05) + (xy 114.95 154.15) + (xy 115.15 154.15) + (xy 115.15 154.25) + (xy 115.25 154.25) + (xy 115.25 154.35) + (xy 115.35 154.35) + (xy 115.35 154.45) + (xy 115.45 154.45) + (xy 115.45 154.55) + (xy 115.55 154.55) + (xy 115.55 154.65) + (xy 115.65 154.65) + (xy 115.65 154.85) + (xy 115.75 154.85) + (xy 115.75 155.05) + (xy 115.85 155.05) + (xy 115.85 155.35) + (xy 115.95 155.35) + (xy 163.35 155.35) + (xy 163.35 154.95) + (xy 163.25 154.95) + (xy 163.25 154.85) + (xy 163.15 154.85) + (xy 163.15 154.75) + (xy 163.05 154.75) + (xy 163.05 154.65) + (xy 162.95 154.65) + (xy 162.95 154.55) + (xy 162.85 154.55) + (xy 162.85 154.45) + (xy 162.75 154.45) + (xy 162.75 154.35) + (xy 162.65 154.35) + (xy 162.65 154.25) + (xy 162.55 154.25) + (xy 162.55 154.15) + (xy 162.45 154.15) + (xy 162.45 154.05) + (xy 162.35 154.05) + (xy 162.35 153.95) + (xy 162.25 153.95) + (xy 162.25 153.85) + (xy 162.15 153.85) + (xy 162.15 153.75) + (xy 162.05 153.75) + (xy 162.05 153.65) + (xy 161.95 153.65) + (xy 161.95 153.55) + (xy 161.85 153.55) + (xy 161.85 153.45) + (xy 161.75 153.45) + (xy 161.75 153.35) + (xy 161.65 153.35) + (xy 161.65 153.25) + (xy 161.55 153.25) + (xy 161.55 153.15) + (xy 161.45 153.15) + (xy 161.45 153.05) + (xy 161.35 153.05) + (xy 161.35 152.95) + (xy 161.25 152.95) + (xy 161.25 152.85) + (xy 161.15 152.85) + (xy 161.15 152.75) + (xy 161.05 152.75) + (xy 161.05 152.65) + (xy 160.95 152.65) + (xy 160.95 152.55) + (xy 160.85 152.55) + (xy 160.85 152.45) + (xy 160.75 152.45) + (xy 160.75 152.35) + (xy 160.65 152.35) + (xy 160.65 152.25) + (xy 160.55 152.25) + (xy 160.55 152.15) + (xy 160.45 152.15) + (xy 160.45 152.05) + (xy 160.35 152.05) + (xy 160.35 151.95) + (xy 160.25 151.95) + (xy 160.25 151.85) + (xy 160.15 151.85) + (xy 160.15 151.75) + (xy 160.05 151.75) + (xy 160.05 151.65) + (xy 159.95 151.65) + (xy 159.95 151.55) + (xy 159.85 151.55) + (xy 159.85 151.45) + (xy 159.75 151.45) + (xy 159.75 151.35) + (xy 159.65 151.35) + (xy 159.65 151.25) + (xy 159.55 151.25) + (xy 159.55 151.15) + (xy 159.45 151.15) + (xy 159.45 151.05) + (xy 159.35 151.05) + (xy 159.35 150.95) + (xy 159.25 150.95) + (xy 159.25 150.85) + (xy 159.15 150.85) + (xy 159.15 150.75) + (xy 159.05 150.75) + (xy 159.05 150.65) + (xy 158.95 150.65) + (xy 158.95 150.55) + (xy 158.85 150.55) + (xy 158.85 150.45) + (xy 158.75 150.45) + (xy 158.75 150.35) + (xy 158.65 150.35) + (xy 158.65 150.25) + (xy 158.55 150.25) + (xy 158.55 150.15) + (xy 158.45 150.15) + (xy 158.45 150.05) + (xy 158.35 150.05) + (xy 158.35 149.95) + (xy 158.25 149.95) + (xy 158.25 149.85) + (xy 158.15 149.85) + (xy 158.15 149.75) + (xy 158.05 149.75) + (xy 158.05 149.65) + (xy 157.95 149.65) + (xy 154.75 149.65) + (xy 154.75 150.35) + (xy 154.65 150.35) + (xy 154.65 150.45) + (xy 154.55 150.45) + (xy 154.55 150.55) + (xy 154.45 150.55) + (xy 154.45 150.65) + (xy 154.25 150.65) + (xy 154.25 150.75) + (xy 154.15 150.75) + (xy 154.15 150.85) + (xy 154.05 150.85) + (xy 154.05 150.95) + (xy 153.95 150.95) + (xy 153.95 151.05) + (xy 153.85 151.05) + (xy 153.85 151.15) + (xy 153.75 151.15) + (xy 153.75 153.45) + (xy 153.85 153.45) + (xy 153.85 154.15) + (xy 153.75 154.15) + (xy 153.75 154.25) + (xy 153.65 154.25) + (xy 153.65 154.35) + (xy 153.55 154.35) + (xy 153.55 154.45) + (xy 152.85 154.45) + (xy 152.85 154.35) + (xy 152.75 154.35) + (xy 152.75 154.25) + (xy 152.65 154.25) + (xy 152.65 154.15) + (xy 152.55 154.15) + (xy 152.55 153.45) + (xy 152.65 153.45) + (xy 152.65 150.65) + (xy 152.75 150.65) + (xy 152.75 150.45) + (xy 152.85 150.45) + (xy 152.85 150.35) + (xy 152.95 150.35) + (xy 152.95 150.25) + (xy 153.05 150.25) + (xy 153.05 150.15) + (xy 153.15 150.15) + (xy 153.15 150.05) + (xy 153.25 150.05) + (xy 153.25 149.95) + (xy 153.35 149.95) + (xy 153.35 149.85) + (xy 153.45 149.85) + (xy 153.45 149.65) + (xy 153.55 149.65) + (xy 153.55 149.55) + (xy 153.65 149.55) + (xy 153.65 149.45) + (xy 153.75 149.45) + (xy 153.75 149.35) + (xy 154.45 149.35) + (xy 154.45 149.45) + (xy 154.55 149.45) + (xy 154.55 149.55) + (xy 154.65 149.55) + (xy 154.65 149.65) + (xy 154.75 149.65) + (xy 157.95 149.65) + (xy 157.95 149.55) + (xy 157.85 149.55) + (xy 157.85 149.45) + (xy 157.75 149.45) + (xy 157.75 149.35) + (xy 157.65 149.35) + (xy 157.65 149.25) + (xy 157.55 149.25) + (xy 157.55 149.15) + (xy 157.45 149.15) + (xy 157.45 149.05) + (xy 157.35 149.05) + (xy 157.35 148.95) + (xy 157.25 148.95) + (xy 157.25 148.85) + (xy 157.15 148.85) + (xy 157.15 148.75) + (xy 157.05 148.75) + (xy 157.05 148.65) + (xy 156.95 148.65) + (xy 136.25 148.65) + (xy 136.25 149.35) + (xy 136.15 149.35) + (xy 136.15 149.45) + (xy 136.05 149.45) + (xy 136.05 149.55) + (xy 135.95 149.55) + (xy 135.95 149.65) + (xy 135.25 149.65) + (xy 135.25 149.55) + (xy 135.15 149.55) + (xy 135.15 149.45) + (xy 133.75 149.45) + (xy 133.75 149.55) + (xy 133.65 149.55) + (xy 133.65 149.65) + (xy 133.55 149.65) + (xy 133.55 149.75) + (xy 133.45 149.75) + (xy 133.45 149.85) + (xy 133.35 149.85) + (xy 133.35 149.95) + (xy 133.25 149.95) + (xy 133.25 150.05) + (xy 133.15 150.05) + (xy 133.15 150.15) + (xy 133.05 150.15) + (xy 133.05 150.25) + (xy 132.95 150.25) + (xy 132.95 150.35) + (xy 132.85 150.35) + (xy 132.85 150.45) + (xy 132.75 150.45) + (xy 132.75 150.55) + (xy 132.65 150.55) + (xy 132.65 150.65) + (xy 132.55 150.65) + (xy 132.55 150.75) + (xy 132.45 150.75) + (xy 132.45 150.85) + (xy 132.35 150.85) + (xy 132.35 150.95) + (xy 132.25 150.95) + (xy 132.25 151.05) + (xy 132.15 151.05) + (xy 132.15 151.15) + (xy 132.05 151.15) + (xy 132.05 151.25) + (xy 131.95 151.25) + (xy 131.95 151.35) + (xy 131.85 151.35) + (xy 131.85 151.45) + (xy 131.75 151.45) + (xy 131.75 151.55) + (xy 131.65 151.55) + (xy 131.65 151.65) + (xy 131.55 151.65) + (xy 131.55 151.75) + (xy 131.45 151.75) + (xy 131.45 151.85) + (xy 131.35 151.85) + (xy 131.35 151.95) + (xy 131.25 151.95) + (xy 131.25 152.05) + (xy 131.15 152.05) + (xy 131.15 152.15) + (xy 131.05 152.15) + (xy 131.05 152.25) + (xy 130.95 152.25) + (xy 130.95 152.35) + (xy 130.85 152.35) + (xy 130.85 152.45) + (xy 130.75 152.45) + (xy 130.75 152.55) + (xy 130.65 152.55) + (xy 130.65 152.65) + (xy 130.55 152.65) + (xy 130.55 152.75) + (xy 130.45 152.75) + (xy 130.45 153.15) + (xy 130.35 153.15) + (xy 130.35 153.25) + (xy 130.25 153.25) + (xy 130.25 153.35) + (xy 130.15 153.35) + (xy 130.15 153.45) + (xy 129.45 153.45) + (xy 129.45 153.35) + (xy 129.35 153.35) + (xy 129.35 153.25) + (xy 129.25 153.25) + (xy 129.25 153.35) + (xy 129.15 153.35) + (xy 129.15 153.45) + (xy 129.05 153.45) + (xy 129.05 153.55) + (xy 128.95 153.55) + (xy 128.95 153.65) + (xy 128.25 153.65) + (xy 128.25 153.55) + (xy 128.15 153.55) + (xy 128.15 153.45) + (xy 128.05 153.45) + (xy 128.05 153.35) + (xy 127.95 153.35) + (xy 127.95 152.75) + (xy 127.85 152.75) + (xy 127.85 152.65) + (xy 127.75 152.65) + (xy 127.75 152.55) + (xy 124.55 152.55) + (xy 124.55 152.45) + (xy 124.45 152.45) + (xy 124.45 152.35) + (xy 124.35 152.35) + (xy 124.35 152.25) + (xy 124.25 152.25) + (xy 124.25 152.15) + (xy 124.15 152.15) + (xy 124.15 152.05) + (xy 124.05 152.05) + (xy 124.05 151.95) + (xy 123.95 151.95) + (xy 123.95 151.85) + (xy 123.85 151.85) + (xy 123.85 151.75) + (xy 123.75 151.75) + (xy 123.75 151.65) + (xy 123.65 151.65) + (xy 123.65 151.55) + (xy 123.55 151.55) + (xy 123.55 151.45) + (xy 123.45 151.45) + (xy 123.45 151.35) + (xy 123.35 151.35) + (xy 123.35 151.25) + (xy 123.25 151.25) + (xy 123.25 151.15) + (xy 123.15 151.15) + (xy 123.15 151.05) + (xy 123.05 151.05) + (xy 123.05 150.95) + (xy 122.95 150.95) + (xy 122.95 150.85) + (xy 122.85 150.85) + (xy 122.85 150.75) + (xy 122.75 150.75) + (xy 122.75 150.65) + (xy 122.65 150.65) + (xy 122.65 150.55) + (xy 122.55 150.55) + (xy 122.55 150.45) + (xy 122.45 150.45) + (xy 122.45 150.35) + (xy 122.35 150.35) + (xy 122.35 150.25) + (xy 122.25 150.25) + (xy 122.25 150.15) + (xy 122.15 150.15) + (xy 122.15 150.05) + (xy 122.05 150.05) + (xy 122.05 149.95) + (xy 121.95 149.95) + (xy 121.95 149.85) + (xy 121.85 149.85) + (xy 121.85 149.75) + (xy 121.75 149.75) + (xy 121.75 149.65) + (xy 121.65 149.65) + (xy 121.65 149.55) + (xy 121.55 149.55) + (xy 121.55 149.45) + (xy 121.45 149.45) + (xy 121.45 149.35) + (xy 121.35 149.35) + (xy 121.35 149.25) + (xy 121.25 149.25) + (xy 121.25 149.15) + (xy 121.15 149.15) + (xy 121.15 149.05) + (xy 121.05 149.05) + (xy 121.05 148.95) + (xy 120.95 148.95) + (xy 120.95 148.85) + (xy 120.85 148.85) + (xy 120.85 148.75) + (xy 120.75 148.75) + (xy 120.75 148.65) + (xy 120.65 148.65) + (xy 120.65 148.55) + (xy 120.55 148.55) + (xy 120.55 148.45) + (xy 120.45 148.45) + (xy 120.45 148.35) + (xy 120.35 148.35) + (xy 120.35 148.25) + (xy 120.25 148.25) + (xy 120.25 148.15) + (xy 120.15 148.15) + (xy 120.15 148.05) + (xy 120.05 148.05) + (xy 120.05 147.95) + (xy 119.95 147.95) + (xy 119.95 147.85) + (xy 119.85 147.85) + (xy 119.85 147.75) + (xy 119.75 147.75) + (xy 119.75 147.65) + (xy 119.65 147.65) + (xy 119.65 147.55) + (xy 119.55 147.55) + (xy 119.55 147.45) + (xy 119.45 147.45) + (xy 119.45 147.35) + (xy 119.35 147.35) + (xy 119.35 147.25) + (xy 119.25 147.25) + (xy 119.25 147.15) + (xy 119.15 147.15) + (xy 119.15 147.05) + (xy 119.05 147.05) + (xy 119.05 146.95) + (xy 118.95 146.95) + (xy 118.95 146.85) + (xy 118.85 146.85) + (xy 118.85 146.75) + (xy 118.75 146.75) + (xy 118.75 146.65) + (xy 118.65 146.65) + (xy 118.65 146.55) + (xy 118.55 146.55) + (xy 111.25 146.55) + (xy 111.25 147.25) + (xy 111.15 147.25) + (xy 111.15 147.35) + (xy 111.05 147.35) + (xy 111.05 147.45) + (xy 110.95 147.45) + (xy 110.95 147.55) + (xy 110.85 147.55) + (xy 110.85 147.65) + (xy 110.75 147.65) + (xy 110.75 147.75) + (xy 110.65 147.75) + (xy 110.65 147.95) + (xy 110.55 147.95) + (xy 110.55 148.05) + (xy 110.45 148.05) + (xy 110.45 148.15) + (xy 110.35 148.15) + (xy 110.35 148.25) + (xy 109.65 148.25) + (xy 109.65 148.15) + (xy 109.55 148.15) + (xy 109.55 148.05) + (xy 109.45 148.05) + (xy 109.45 147.95) + (xy 109.35 147.95) + (xy 109.35 147.55) + (xy 109.25 147.55) + (xy 109.25 147.45) + (xy 109.15 147.45) + (xy 109.15 147.35) + (xy 109.05 147.35) + (xy 109.05 147.25) + (xy 108.95 147.25) + (xy 108.95 147.15) + (xy 108.85 147.15) + (xy 108.85 147.05) + (xy 108.75 147.05) + (xy 108.75 146.95) + (xy 108.65 146.95) + (xy 108.65 146.85) + (xy 108.55 146.85) + (xy 106.75 146.85) + (xy 106.75 146.95) + (xy 106.65 146.95) + (xy 106.65 147.25) + (xy 106.55 147.25) + (xy 106.55 147.35) + (xy 106.45 147.35) + (xy 106.45 147.45) + (xy 106.35 147.45) + (xy 106.35 147.55) + (xy 105.65 147.55) + (xy 105.65 147.45) + (xy 105.55 147.45) + (xy 105.55 147.35) + (xy 105.45 147.35) + (xy 105.45 147.25) + (xy 105.35 147.25) + (xy 105.35 146.95) + (xy 105.25 146.95) + (xy 105.25 146.85) + (xy 105.35 146.85) + (xy 105.35 146.55) + (xy 105.45 146.55) + (xy 105.45 146.35) + (xy 105.65 146.35) + (xy 105.65 146.25) + (xy 105.85 146.25) + (xy 105.85 146.15) + (xy 106.15 146.15) + (xy 106.15 146.25) + (xy 106.35 146.25) + (xy 106.35 146.35) + (xy 106.55 146.35) + (xy 106.55 146.55) + (xy 106.65 146.55) + (xy 106.65 146.85) + (xy 106.75 146.85) + (xy 108.55 146.85) + (xy 108.55 146.75) + (xy 108.45 146.75) + (xy 108.45 146.65) + (xy 108.35 146.65) + (xy 108.35 146.55) + (xy 108.25 146.55) + (xy 108.25 146.45) + (xy 108.15 146.45) + (xy 108.15 146.35) + (xy 108.05 146.35) + (xy 108.05 146.25) + (xy 107.95 146.25) + (xy 107.95 146.15) + (xy 107.85 146.15) + (xy 107.85 146.05) + (xy 107.75 146.05) + (xy 107.75 145.95) + (xy 107.65 145.95) + (xy 107.65 145.85) + (xy 107.55 145.85) + (xy 107.55 145.75) + (xy 107.45 145.75) + (xy 107.45 145.65) + (xy 107.35 145.65) + (xy 107.35 145.55) + (xy 107.25 145.55) + (xy 107.25 145.45) + (xy 107.15 145.45) + (xy 107.15 145.35) + (xy 107.05 145.35) + (xy 107.05 145.25) + (xy 106.95 145.25) + (xy 106.95 145.15) + (xy 106.85 145.15) + (xy 106.85 145.05) + (xy 106.75 145.05) + (xy 106.75 144.95) + (xy 106.65 144.95) + (xy 106.65 144.85) + (xy 106.35 144.85) + (xy 106.35 144.95) + (xy 105.95 144.95) + (xy 105.95 144.85) + (xy 105.75 144.85) + (xy 105.75 144.75) + (xy 105.65 144.75) + (xy 105.65 144.65) + (xy 105.55 144.65) + (xy 105.55 144.45) + (xy 105.45 144.45) + (xy 105.45 144.05) + (xy 105.55 144.05) + (xy 105.55 143.85) + (xy 105.65 143.85) + (xy 105.65 143.65) + (xy 105.55 143.65) + (xy 105.55 143.45) + (xy 105.45 143.45) + (xy 105.45 143.05) + (xy 105.55 143.05) + (xy 105.55 142.85) + (xy 105.65 142.85) + (xy 105.65 142.75) + (xy 105.75 142.75) + (xy 105.75 142.65) + (xy 105.95 142.65) + (xy 105.95 142.55) + (xy 106.35 142.55) + (xy 106.35 142.65) + (xy 106.55 142.65) + (xy 106.55 142.75) + (xy 106.65 142.75) + (xy 106.65 142.85) + (xy 106.75 142.85) + (xy 106.75 143.05) + (xy 106.85 143.05) + (xy 106.85 143.45) + (xy 106.75 143.45) + (xy 106.75 143.75) + (xy 106.85 143.75) + (xy 106.85 143.85) + (xy 106.95 143.85) + (xy 106.95 143.95) + (xy 107.05 143.95) + (xy 107.05 144.05) + (xy 107.15 144.05) + (xy 107.15 144.15) + (xy 107.25 144.15) + (xy 107.25 144.25) + (xy 107.35 144.25) + (xy 107.35 144.35) + (xy 107.45 144.35) + (xy 107.45 144.45) + (xy 107.55 144.45) + (xy 107.55 144.55) + (xy 107.65 144.55) + (xy 107.65 144.65) + (xy 107.75 144.65) + (xy 107.75 144.75) + (xy 107.85 144.75) + (xy 107.85 144.85) + (xy 107.95 144.85) + (xy 107.95 144.95) + (xy 108.05 144.95) + (xy 108.05 145.05) + (xy 108.15 145.05) + (xy 108.15 145.15) + (xy 108.25 145.15) + (xy 108.25 145.25) + (xy 108.35 145.25) + (xy 108.35 145.35) + (xy 108.45 145.35) + (xy 108.45 145.45) + (xy 108.55 145.45) + (xy 108.55 145.35) + (xy 108.65 145.35) + (xy 108.65 145.25) + (xy 108.75 145.25) + (xy 108.75 142.35) + (xy 108.65 142.35) + (xy 108.65 141.65) + (xy 108.75 141.65) + (xy 108.75 141.55) + (xy 108.85 141.55) + (xy 108.85 141.45) + (xy 108.95 141.45) + (xy 108.95 141.35) + (xy 109.65 141.35) + (xy 109.65 141.45) + (xy 109.75 141.45) + (xy 109.75 141.55) + (xy 109.85 141.55) + (xy 109.85 141.65) + (xy 109.95 141.65) + (xy 109.95 142.35) + (xy 109.85 142.35) + (xy 109.85 145.35) + (xy 109.95 145.35) + (xy 109.95 145.45) + (xy 110.05 145.45) + (xy 110.05 145.55) + (xy 110.15 145.55) + (xy 110.15 145.65) + (xy 110.25 145.65) + (xy 110.25 145.75) + (xy 110.35 145.75) + (xy 110.35 145.85) + (xy 110.45 145.85) + (xy 110.45 145.95) + (xy 110.55 145.95) + (xy 110.55 146.05) + (xy 110.65 146.05) + (xy 110.65 146.15) + (xy 110.75 146.15) + (xy 110.75 146.25) + (xy 110.95 146.25) + (xy 110.95 146.35) + (xy 111.05 146.35) + (xy 111.05 146.45) + (xy 111.15 146.45) + (xy 111.15 146.55) + (xy 111.25 146.55) + (xy 118.55 146.55) + (xy 118.55 146.45) + (xy 118.45 146.45) + (xy 118.45 146.35) + (xy 118.35 146.35) + (xy 118.35 146.25) + (xy 118.25 146.25) + (xy 118.25 146.15) + (xy 118.15 146.15) + (xy 118.15 146.05) + (xy 118.05 146.05) + (xy 118.05 145.95) + (xy 117.65 145.95) + (xy 117.65 145.85) + (xy 117.55 145.85) + (xy 117.55 145.75) + (xy 117.45 145.75) + (xy 117.45 145.65) + (xy 117.35 145.65) + (xy 117.35 144.95) + (xy 117.45 144.95) + (xy 117.45 144.85) + (xy 117.55 144.85) + (xy 117.55 144.75) + (xy 117.65 144.75) + (xy 117.65 144.65) + (xy 118.35 144.65) + (xy 118.35 144.75) + (xy 118.45 144.75) + (xy 118.45 144.85) + (xy 118.55 144.85) + (xy 118.55 144.95) + (xy 118.65 144.95) + (xy 118.65 145.35) + (xy 118.75 145.35) + (xy 118.75 145.45) + (xy 118.85 145.45) + (xy 118.85 145.55) + (xy 118.95 145.55) + (xy 118.95 145.65) + (xy 119.05 145.65) + (xy 119.05 145.75) + (xy 119.15 145.75) + (xy 119.15 145.85) + (xy 119.25 145.85) + (xy 119.25 145.95) + (xy 119.35 145.95) + (xy 119.35 146.05) + (xy 119.45 146.05) + (xy 119.45 146.15) + (xy 119.55 146.15) + (xy 119.55 146.25) + (xy 119.65 146.25) + (xy 119.65 146.35) + (xy 119.75 146.35) + (xy 119.75 146.45) + (xy 119.85 146.45) + (xy 119.85 146.55) + (xy 119.95 146.55) + (xy 119.95 146.65) + (xy 120.05 146.65) + (xy 120.05 146.75) + (xy 120.15 146.75) + (xy 120.15 146.85) + (xy 120.25 146.85) + (xy 120.25 146.95) + (xy 120.35 146.95) + (xy 120.35 147.05) + (xy 120.45 147.05) + (xy 120.45 147.15) + (xy 120.55 147.15) + (xy 120.55 147.25) + (xy 120.65 147.25) + (xy 120.65 147.35) + (xy 120.75 147.35) + (xy 120.75 147.45) + (xy 120.85 147.45) + (xy 120.85 147.55) + (xy 120.95 147.55) + (xy 120.95 147.65) + (xy 121.05 147.65) + (xy 121.05 147.75) + (xy 121.15 147.75) + (xy 121.15 147.85) + (xy 121.25 147.85) + (xy 121.25 147.95) + (xy 121.35 147.95) + (xy 121.35 148.05) + (xy 121.45 148.05) + (xy 121.45 148.15) + (xy 121.55 148.15) + (xy 121.55 148.25) + (xy 121.65 148.25) + (xy 121.65 148.35) + (xy 121.75 148.35) + (xy 121.75 148.45) + (xy 121.85 148.45) + (xy 121.85 148.55) + (xy 121.95 148.55) + (xy 121.95 148.65) + (xy 122.05 148.65) + (xy 122.05 148.75) + (xy 122.15 148.75) + (xy 122.15 148.85) + (xy 122.25 148.85) + (xy 122.25 148.95) + (xy 122.35 148.95) + (xy 122.35 149.05) + (xy 122.45 149.05) + (xy 122.45 149.15) + (xy 122.55 149.15) + (xy 122.55 149.25) + (xy 122.65 149.25) + (xy 122.65 149.35) + (xy 122.75 149.35) + (xy 122.75 149.45) + (xy 122.85 149.45) + (xy 122.85 149.55) + (xy 122.95 149.55) + (xy 122.95 149.65) + (xy 123.05 149.65) + (xy 123.05 149.75) + (xy 123.15 149.75) + (xy 123.15 149.85) + (xy 123.25 149.85) + (xy 123.25 149.95) + (xy 123.35 149.95) + (xy 123.35 150.05) + (xy 123.45 150.05) + (xy 123.45 150.15) + (xy 123.55 150.15) + (xy 123.55 150.25) + (xy 123.65 150.25) + (xy 123.65 150.35) + (xy 123.75 150.35) + (xy 123.75 150.45) + (xy 123.85 150.45) + (xy 123.85 150.55) + (xy 123.95 150.55) + (xy 123.95 150.65) + (xy 124.05 150.65) + (xy 124.05 150.75) + (xy 124.15 150.75) + (xy 124.15 150.85) + (xy 124.25 150.85) + (xy 124.25 150.95) + (xy 124.35 150.95) + (xy 124.35 151.05) + (xy 124.45 151.05) + (xy 124.45 151.15) + (xy 124.55 151.15) + (xy 124.55 151.25) + (xy 124.65 151.25) + (xy 124.65 151.35) + (xy 124.75 151.35) + (xy 124.75 151.45) + (xy 124.85 151.45) + (xy 124.85 151.55) + (xy 124.95 151.55) + (xy 124.95 151.65) + (xy 126.25 151.65) + (xy 126.25 151.55) + (xy 126.35 151.55) + (xy 126.35 151.45) + (xy 126.45 151.45) + (xy 126.45 150.85) + (xy 126.55 150.85) + (xy 126.55 150.75) + (xy 126.65 150.75) + (xy 126.65 146.75) + (xy 126.55 146.75) + (xy 126.55 146.65) + (xy 126.45 146.65) + (xy 126.45 146.55) + (xy 123.45 146.55) + (xy 123.45 146.65) + (xy 123.35 146.65) + (xy 123.35 146.75) + (xy 122.65 146.75) + (xy 122.65 146.65) + (xy 122.55 146.65) + (xy 122.55 146.55) + (xy 122.45 146.55) + (xy 122.45 146.45) + (xy 122.35 146.45) + (xy 122.35 145.75) + (xy 122.45 145.75) + (xy 122.45 145.65) + (xy 122.55 145.65) + (xy 122.55 145.55) + (xy 122.65 145.55) + (xy 122.65 145.45) + (xy 123.35 145.45) + (xy 123.35 145.55) + (xy 123.45 145.55) + (xy 123.45 145.65) + (xy 128.15 145.65) + (xy 128.15 145.55) + (xy 128.25 145.55) + (xy 128.25 145.45) + (xy 128.35 145.45) + (xy 128.35 145.35) + (xy 128.25 145.35) + (xy 128.25 145.25) + (xy 128.15 145.25) + (xy 128.15 145.15) + (xy 128.05 145.15) + (xy 128.05 145.05) + (xy 127.95 145.05) + (xy 127.95 144.95) + (xy 127.85 144.95) + (xy 127.85 144.85) + (xy 127.75 144.85) + (xy 127.75 144.75) + (xy 127.65 144.75) + (xy 127.65 144.65) + (xy 127.55 144.65) + (xy 127.55 144.55) + (xy 121.45 144.55) + (xy 121.45 144.65) + (xy 121.35 144.65) + (xy 121.35 144.75) + (xy 120.65 144.75) + (xy 120.65 144.65) + (xy 120.55 144.65) + (xy 120.55 144.55) + (xy 120.45 144.55) + (xy 120.45 144.45) + (xy 120.35 144.45) + (xy 120.35 143.75) + (xy 120.45 143.75) + (xy 120.45 143.65) + (xy 120.55 143.65) + (xy 120.55 143.55) + (xy 120.65 143.55) + (xy 120.65 143.45) + (xy 121.35 143.45) + (xy 121.35 143.55) + (xy 121.45 143.55) + (xy 121.45 143.65) + (xy 127.95 143.65) + (xy 127.95 143.75) + (xy 128.05 143.75) + (xy 128.05 143.85) + (xy 128.15 143.85) + (xy 128.15 143.95) + (xy 128.25 143.95) + (xy 128.25 144.05) + (xy 128.35 144.05) + (xy 128.35 144.15) + (xy 128.45 144.15) + (xy 128.45 144.25) + (xy 128.55 144.25) + (xy 128.55 144.35) + (xy 128.65 144.35) + (xy 128.65 144.45) + (xy 128.75 144.45) + (xy 128.75 144.55) + (xy 128.85 144.55) + (xy 128.85 144.65) + (xy 128.95 144.65) + (xy 128.95 144.75) + (xy 129.05 144.75) + (xy 129.05 144.85) + (xy 129.15 144.85) + (xy 129.15 144.95) + (xy 129.25 144.95) + (xy 129.25 145.05) + (xy 129.35 145.05) + (xy 129.35 145.15) + (xy 129.45 145.15) + (xy 129.45 145.25) + (xy 129.55 145.25) + (xy 129.55 145.35) + (xy 129.65 145.35) + (xy 129.65 145.45) + (xy 129.75 145.45) + (xy 129.75 145.55) + (xy 129.85 145.55) + (xy 129.85 145.65) + (xy 129.95 145.65) + (xy 129.95 145.75) + (xy 130.05 145.75) + (xy 130.05 145.85) + (xy 130.15 145.85) + (xy 130.15 145.95) + (xy 130.25 145.95) + (xy 130.25 146.05) + (xy 130.35 146.05) + (xy 130.35 146.15) + (xy 130.45 146.15) + (xy 130.45 146.25) + (xy 130.55 146.25) + (xy 130.55 146.35) + (xy 130.65 146.35) + (xy 130.65 146.45) + (xy 130.75 146.45) + (xy 130.75 146.55) + (xy 130.85 146.55) + (xy 130.85 146.65) + (xy 130.95 146.65) + (xy 130.95 146.75) + (xy 131.05 146.75) + (xy 131.05 146.85) + (xy 131.15 146.85) + (xy 131.15 146.95) + (xy 131.25 146.95) + (xy 131.25 147.05) + (xy 131.35 147.05) + (xy 131.35 147.15) + (xy 131.55 147.15) + (xy 131.55 147.05) + (xy 131.65 147.05) + (xy 131.65 146.95) + (xy 131.75 146.95) + (xy 131.75 146.85) + (xy 131.85 146.85) + (xy 131.85 146.75) + (xy 132.55 146.75) + (xy 132.55 146.85) + (xy 132.65 146.85) + (xy 132.65 146.95) + (xy 133.45 146.95) + (xy 133.45 147.05) + (xy 133.55 147.05) + (xy 133.55 147.15) + (xy 133.65 147.15) + (xy 133.65 147.25) + (xy 133.75 147.25) + (xy 133.75 147.35) + (xy 133.85 147.35) + (xy 133.85 147.45) + (xy 133.95 147.45) + (xy 133.95 147.55) + (xy 134.05 147.55) + (xy 134.05 148.35) + (xy 134.15 148.35) + (xy 134.15 148.45) + (xy 134.25 148.45) + (xy 134.25 148.55) + (xy 135.15 148.55) + (xy 135.15 148.45) + (xy 135.25 148.45) + (xy 135.25 148.35) + (xy 135.95 148.35) + (xy 135.95 148.45) + (xy 136.05 148.45) + (xy 136.05 148.55) + (xy 136.15 148.55) + (xy 136.15 148.65) + (xy 136.25 148.65) + (xy 156.95 148.65) + (xy 156.95 148.55) + (xy 156.85 148.55) + (xy 156.85 148.45) + (xy 156.75 148.45) + (xy 156.75 148.35) + (xy 156.65 148.35) + (xy 156.65 148.25) + (xy 156.55 148.25) + (xy 156.55 148.15) + (xy 156.45 148.15) + (xy 156.45 148.05) + (xy 156.35 148.05) + (xy 156.35 147.95) + (xy 156.25 147.95) + (xy 156.25 147.85) + (xy 156.15 147.85) + (xy 156.15 147.75) + (xy 156.05 147.75) + (xy 156.05 147.65) + (xy 155.95 147.65) + (xy 155.95 147.55) + (xy 155.85 147.55) + (xy 155.85 147.45) + (xy 155.75 147.45) + (xy 155.75 147.55) + (xy 155.65 147.55) + (xy 155.65 147.65) + (xy 155.55 147.65) + (xy 155.55 147.75) + (xy 155.45 147.75) + (xy 155.45 147.85) + (xy 155.35 147.85) + (xy 155.35 147.95) + (xy 155.25 147.95) + (xy 155.25 148.05) + (xy 154.55 148.05) + (xy 154.55 147.95) + (xy 154.45 147.95) + (xy 154.45 147.85) + (xy 153.75 147.85) + (xy 153.75 147.95) + (xy 153.65 147.95) + (xy 153.65 148.05) + (xy 152.95 148.05) + (xy 152.95 147.95) + (xy 152.85 147.95) + (xy 152.85 147.85) + (xy 152.75 147.85) + (xy 152.75 147.75) + (xy 152.65 147.75) + (xy 152.65 147.05) + (xy 152.75 147.05) + (xy 152.75 146.95) + (xy 152.85 146.95) + (xy 152.85 146.85) + (xy 152.95 146.85) + (xy 152.95 146.75) + (xy 153.65 146.75) + (xy 153.65 146.85) + (xy 153.75 146.85) + (xy 153.75 146.95) + (xy 154.45 146.95) + (xy 154.45 146.85) + (xy 154.55 146.85) + (xy 154.55 146.75) + (xy 154.65 146.75) + (xy 154.65 146.65) + (xy 154.75 146.65) + (xy 154.75 146.55) + (xy 154.85 146.55) + (xy 154.85 146.45) + (xy 154.75 146.45) + (xy 154.75 146.35) + (xy 154.65 146.35) + (xy 154.65 146.25) + (xy 154.55 146.25) + (xy 154.55 146.15) + (xy 154.45 146.15) + (xy 154.45 146.05) + (xy 154.35 146.05) + (xy 154.35 145.95) + (xy 154.25 145.95) + (xy 154.25 145.85) + (xy 154.15 145.85) + (xy 154.15 145.75) + (xy 154.05 145.75) + (xy 154.05 145.65) + (xy 153.95 145.65) + (xy 153.95 145.55) + (xy 153.85 145.55) + (xy 153.85 145.45) + (xy 153.75 145.45) + (xy 153.75 145.35) + (xy 153.65 145.35) + (xy 153.65 145.25) + (xy 153.55 145.25) + (xy 153.55 145.15) + (xy 153.45 145.15) + (xy 153.45 145.05) + (xy 153.35 145.05) + (xy 153.35 144.95) + (xy 153.25 144.95) + (xy 153.25 144.85) + (xy 153.15 144.85) + (xy 153.15 144.75) + (xy 153.05 144.75) + (xy 153.05 144.65) + (xy 152.65 144.65) + (xy 152.65 144.55) + (xy 152.55 144.55) + (xy 152.55 144.45) + (xy 152.45 144.45) + (xy 152.45 144.35) + (xy 152.35 144.35) + (xy 152.35 143.65) + (xy 152.45 143.65) + (xy 152.45 143.55) + (xy 152.55 143.55) + (xy 152.55 143.45) + (xy 152.65 143.45) + (xy 152.65 143.35) + (xy 153.35 143.35) + (xy 153.35 143.45) + (xy 153.45 143.45) + (xy 153.45 143.55) + (xy 153.55 143.55) + (xy 153.55 143.65) + (xy 153.65 143.65) + (xy 153.65 144.05) + (xy 153.75 144.05) + (xy 153.75 144.15) + (xy 153.85 144.15) + (xy 153.85 144.25) + (xy 153.95 144.25) + (xy 153.95 144.35) + (xy 154.05 144.35) + (xy 154.05 144.45) + (xy 154.15 144.45) + (xy 154.15 144.55) + (xy 154.25 144.55) + (xy 154.25 144.65) + (xy 154.35 144.65) + (xy 154.35 144.75) + (xy 154.45 144.75) + (xy 154.45 144.85) + (xy 154.55 144.85) + (xy 154.55 144.95) + (xy 154.65 144.95) + (xy 154.65 145.05) + (xy 154.75 145.05) + (xy 154.75 145.15) + (xy 154.85 145.15) + (xy 154.85 145.25) + (xy 154.95 145.25) + (xy 154.95 145.35) + (xy 155.05 145.35) + (xy 155.05 145.45) + (xy 155.15 145.45) + (xy 155.15 145.55) + (xy 155.25 145.55) + (xy 155.25 145.65) + (xy 155.35 145.65) + (xy 155.35 145.75) + (xy 155.45 145.75) + (xy 155.45 145.85) + (xy 155.55 145.85) + (xy 155.55 145.95) + (xy 155.65 145.95) + (xy 155.65 146.05) + (xy 155.75 146.05) + (xy 155.75 146.15) + (xy 155.85 146.15) + (xy 155.85 146.25) + (xy 155.95 146.25) + (xy 155.95 146.35) + (xy 156.05 146.35) + (xy 156.05 146.45) + (xy 156.15 146.45) + (xy 156.15 146.55) + (xy 156.25 146.55) + (xy 156.25 146.65) + (xy 156.35 146.65) + (xy 156.35 146.75) + (xy 156.45 146.75) + (xy 156.45 146.85) + (xy 156.55 146.85) + (xy 156.55 146.95) + (xy 156.65 146.95) + (xy 156.65 147.05) + (xy 156.75 147.05) + (xy 156.75 147.15) + (xy 156.85 147.15) + (xy 156.85 147.25) + (xy 156.95 147.25) + (xy 156.95 147.35) + (xy 157.05 147.35) + (xy 157.05 147.45) + (xy 157.15 147.45) + (xy 157.15 147.55) + (xy 157.25 147.55) + (xy 157.25 147.65) + (xy 157.35 147.65) + (xy 157.35 147.75) + (xy 157.45 147.75) + (xy 157.45 147.85) + (xy 157.55 147.85) + (xy 157.55 147.95) + (xy 157.65 147.95) + (xy 157.65 148.05) + (xy 157.75 148.05) + (xy 157.75 148.15) + (xy 157.85 148.15) + (xy 157.85 148.25) + (xy 157.95 148.25) + (xy 157.95 148.35) + (xy 158.05 148.35) + (xy 158.05 148.45) + (xy 158.15 148.45) + (xy 158.15 148.55) + (xy 158.25 148.55) + (xy 158.25 148.65) + (xy 158.35 148.65) + (xy 158.35 148.75) + (xy 158.45 148.75) + (xy 158.45 148.85) + (xy 158.55 148.85) + (xy 158.55 148.95) + (xy 158.65 148.95) + (xy 158.65 149.05) + (xy 158.75 149.05) + (xy 158.75 149.15) + (xy 158.85 149.15) + (xy 158.85 149.25) + (xy 158.95 149.25) + (xy 158.95 149.35) + (xy 159.05 149.35) + (xy 159.05 149.45) + (xy 159.15 149.45) + (xy 159.15 149.55) + (xy 159.25 149.55) + (xy 159.25 149.65) + (xy 159.35 149.65) + (xy 159.35 149.75) + (xy 159.45 149.75) + (xy 159.45 149.85) + (xy 159.55 149.85) + (xy 159.55 149.95) + (xy 159.65 149.95) + (xy 159.65 150.05) + (xy 159.75 150.05) + (xy 159.75 150.15) + (xy 159.85 150.15) + (xy 159.85 150.25) + (xy 159.95 150.25) + (xy 159.95 150.35) + (xy 160.05 150.35) + (xy 160.05 150.45) + (xy 160.15 150.45) + (xy 160.15 150.55) + (xy 160.25 150.55) + (xy 160.25 150.65) + (xy 160.35 150.65) + (xy 160.35 150.75) + (xy 160.45 150.75) + (xy 160.45 150.85) + (xy 160.55 150.85) + (xy 160.55 150.95) + (xy 160.65 150.95) + (xy 160.65 151.05) + (xy 160.75 151.05) + (xy 160.75 151.15) + (xy 160.85 151.15) + (xy 160.85 151.25) + (xy 160.95 151.25) + (xy 160.95 151.35) + (xy 161.05 151.35) + (xy 161.05 151.45) + (xy 161.15 151.45) + (xy 161.15 151.55) + (xy 161.25 151.55) + (xy 161.25 151.65) + (xy 161.35 151.65) + (xy 161.35 151.75) + (xy 161.45 151.75) + (xy 161.45 151.85) + (xy 161.55 151.85) + (xy 161.55 151.95) + (xy 161.65 151.95) + (xy 161.65 152.05) + (xy 161.75 152.05) + (xy 161.75 152.15) + (xy 161.85 152.15) + (xy 161.85 152.25) + (xy 161.95 152.25) + (xy 161.95 152.35) + (xy 162.05 152.35) + (xy 162.05 152.45) + (xy 162.15 152.45) + (xy 162.15 152.55) + (xy 162.25 152.55) + (xy 162.25 152.65) + (xy 162.35 152.65) + (xy 162.35 152.75) + (xy 162.45 152.75) + (xy 162.45 152.85) + (xy 162.55 152.85) + (xy 162.55 152.95) + (xy 162.65 152.95) + (xy 162.65 153.05) + (xy 162.75 153.05) + (xy 162.75 153.15) + (xy 162.85 153.15) + (xy 162.85 153.25) + (xy 162.95 153.25) + (xy 162.95 153.35) + (xy 163.05 153.35) + (xy 163.05 153.45) + (xy 163.15 153.45) + (xy 163.15 153.55) + (xy 163.25 153.55) + (xy 163.25 153.65) + (xy 163.35 153.65) + (xy 163.35 153.75) + (xy 163.45 153.75) + (xy 163.45 153.85) + (xy 163.55 153.85) + (xy 163.55 153.95) + (xy 163.65 153.95) + (xy 163.65 154.05) + (xy 163.75 154.05) + (xy 163.75 154.15) + (xy 163.85 154.15) + (xy 163.85 154.25) + (xy 163.95 154.25) + (xy 163.95 154.35) + (xy 164.35 154.35) + (xy 164.35 154.45) + (xy 164.45 154.45) + (xy 164.45 154.55) + (xy 164.55 154.55) + (xy 164.55 154.65) + (xy 164.65 154.65) + (xy 176.25 154.65) + (xy 176.25 154.25) + (xy 176.35 154.25) + (xy 176.35 153.95) + (xy 176.45 153.95) + (xy 176.45 153.85) + (xy 176.55 153.85) + (xy 176.55 153.75) + (xy 176.65 153.75) + (xy 176.65 153.65) + (xy 176.75 153.65) + (xy 176.75 153.55) + (xy 176.85 153.55) + (xy 176.85 153.45) + (xy 176.75 153.45) + (xy 176.75 153.35) + (xy 176.65 153.35) + (xy 176.65 153.25) + (xy 176.55 153.25) + (xy 176.55 153.15) + (xy 176.35 153.15) + (xy 176.35 152.95) + (xy 176.25 152.95) + (xy 176.25 151.05) + (xy 176.35 151.05) + (xy 176.35 150.85) + (xy 176.55 150.85) + (xy 176.55 150.75) + (xy 178.45 150.75) + (xy 178.45 150.85) + (xy 178.65 150.85) + (xy 178.65 151.05) + (xy 178.75 151.05) + (xy 179.45 151.05) + (xy 179.45 150.45) + (xy 168.05 150.45) + (xy 168.05 151.05) + (xy 167.95 151.05) + (xy 167.95 151.35) + (xy 167.85 151.35) + (xy 167.85 151.65) + (xy 167.75 151.65) + (xy 167.75 151.75) + (xy 167.65 151.75) + (xy 167.65 151.95) + (xy 167.55 151.95) + (xy 167.55 152.05) + (xy 167.45 152.05) + (xy 167.45 152.15) + (xy 167.35 152.15) + (xy 167.35 152.25) + (xy 167.25 152.25) + (xy 167.25 152.35) + (xy 167.05 152.35) + (xy 167.05 152.45) + (xy 166.95 152.45) + (xy 166.95 152.55) + (xy 166.65 152.55) + (xy 166.65 152.65) + (xy 165.45 152.65) + (xy 165.45 152.55) + (xy 165.15 152.55) + (xy 165.15 152.45) + (xy 164.95 152.45) + (xy 164.95 152.35) + (xy 164.85 152.35) + (xy 164.85 152.25) + (xy 164.75 152.25) + (xy 164.75 152.15) + (xy 164.65 152.15) + (xy 164.65 152.05) + (xy 164.55 152.05) + (xy 164.55 151.95) + (xy 164.45 151.95) + (xy 164.45 151.85) + (xy 164.35 151.85) + (xy 164.35 151.65) + (xy 164.25 151.65) + (xy 164.25 151.45) + (xy 164.15 151.45) + (xy 164.15 151.15) + (xy 164.05 151.15) + (xy 164.05 150.35) + (xy 164.15 150.35) + (xy 164.15 149.95) + (xy 164.25 149.95) + (xy 164.25 149.75) + (xy 164.35 149.75) + (xy 164.35 149.65) + (xy 164.45 149.65) + (xy 164.45 149.45) + (xy 164.55 149.45) + (xy 164.55 149.35) + (xy 164.65 149.35) + (xy 164.65 149.25) + (xy 164.75 149.25) + (xy 164.75 149.15) + (xy 164.95 149.15) + (xy 164.95 149.05) + (xy 165.05 149.05) + (xy 165.05 148.95) + (xy 165.25 148.95) + (xy 165.25 148.85) + (xy 165.55 148.85) + (xy 165.55 148.75) + (xy 166.55 148.75) + (xy 166.55 148.85) + (xy 166.85 148.85) + (xy 166.85 148.95) + (xy 167.05 148.95) + (xy 167.05 149.05) + (xy 167.15 149.05) + (xy 167.15 149.15) + (xy 167.35 149.15) + (xy 167.35 149.25) + (xy 167.45 149.25) + (xy 167.45 149.35) + (xy 167.55 149.35) + (xy 167.55 149.55) + (xy 167.65 149.55) + (xy 167.65 149.65) + (xy 167.75 149.65) + (xy 167.75 149.85) + (xy 167.85 149.85) + (xy 167.85 150.05) + (xy 167.95 150.05) + (xy 167.95 150.45) + (xy 168.05 150.45) + (xy 179.45 150.45) + (xy 179.45 139.65) + (xy 177.85 139.65) + (xy 177.85 141.75) + (xy 177.75 141.75) + (xy 177.75 141.85) + (xy 177.65 141.85) + (xy 177.65 141.95) + (xy 177.55 141.95) + (xy 177.55 142.05) + (xy 177.45 142.05) + (xy 177.45 142.15) + (xy 177.35 142.15) + (xy 177.35 142.25) + (xy 177.45 142.25) + (xy 177.45 142.35) + (xy 177.55 142.35) + (xy 177.55 142.45) + (xy 177.65 142.45) + (xy 177.65 142.65) + (xy 177.75 142.65) + (xy 177.75 142.85) + (xy 177.85 142.85) + (xy 177.85 143.55) + (xy 177.75 143.55) + (xy 177.75 143.75) + (xy 177.65 143.75) + (xy 177.65 143.95) + (xy 177.55 143.95) + (xy 177.55 144.05) + (xy 177.45 144.05) + (xy 177.45 144.15) + (xy 177.35 144.15) + (xy 177.35 144.25) + (xy 177.15 144.25) + (xy 177.15 144.35) + (xy 176.85 144.35) + (xy 176.85 144.45) + (xy 176.15 144.45) + (xy 176.15 144.35) + (xy 175.85 144.35) + (xy 175.85 144.25) + (xy 175.65 144.25) + (xy 175.65 144.15) + (xy 175.55 144.15) + (xy 175.55 144.05) + (xy 175.45 144.05) + (xy 175.45 143.95) + (xy 175.35 143.95) + (xy 175.35 143.75) + (xy 175.25 143.75) + (xy 175.25 143.55) + (xy 175.15 143.55) + (xy 175.15 142.85) + (xy 175.25 142.85) + (xy 175.25 142.65) + (xy 175.35 142.65) + (xy 175.35 142.45) + (xy 175.45 142.45) + (xy 175.45 142.35) + (xy 175.55 142.35) + (xy 175.55 142.25) + (xy 175.65 142.25) + (xy 175.65 142.15) + (xy 175.55 142.15) + (xy 175.55 142.05) + (xy 175.45 142.05) + (xy 175.45 141.95) + (xy 175.35 141.95) + (xy 175.35 141.85) + (xy 175.25 141.85) + (xy 175.25 141.75) + (xy 175.15 141.75) + (xy 175.15 141.15) + (xy 159.75 141.15) + (xy 159.75 141.85) + (xy 159.65 141.85) + (xy 159.65 141.95) + (xy 159.55 141.95) + (xy 159.55 142.05) + (xy 159.45 142.05) + (xy 159.45 142.15) + (xy 159.25 142.15) + (xy 159.25 142.25) + (xy 159.15 142.25) + (xy 159.15 142.35) + (xy 159.05 142.35) + (xy 159.05 142.45) + (xy 158.95 142.45) + (xy 158.95 142.55) + (xy 158.85 142.55) + (xy 158.85 142.65) + (xy 158.75 142.65) + (xy 158.75 142.75) + (xy 158.65 142.75) + (xy 158.65 142.85) + (xy 158.55 142.85) + (xy 158.55 142.95) + (xy 158.45 142.95) + (xy 158.45 143.05) + (xy 158.35 143.05) + (xy 158.35 143.15) + (xy 158.25 143.15) + (xy 158.25 143.25) + (xy 158.15 143.25) + (xy 158.15 143.45) + (xy 158.05 143.45) + (xy 158.05 143.55) + (xy 157.95 143.55) + (xy 157.95 143.65) + (xy 157.85 143.65) + (xy 157.85 143.75) + (xy 157.15 143.75) + (xy 157.15 143.65) + (xy 157.05 143.65) + (xy 157.05 143.55) + (xy 156.95 143.55) + (xy 156.95 143.45) + (xy 156.85 143.45) + (xy 156.85 142.75) + (xy 156.95 142.75) + (xy 156.95 142.65) + (xy 157.05 142.65) + (xy 157.05 142.55) + (xy 157.15 142.55) + (xy 157.15 142.45) + (xy 157.35 142.45) + (xy 157.35 142.35) + (xy 157.45 142.35) + (xy 157.45 142.25) + (xy 157.55 142.25) + (xy 157.55 142.15) + (xy 157.65 142.15) + (xy 157.65 142.05) + (xy 157.75 142.05) + (xy 157.75 141.95) + (xy 157.85 141.95) + (xy 157.85 141.85) + (xy 157.95 141.85) + (xy 157.95 141.75) + (xy 158.05 141.75) + (xy 158.05 141.65) + (xy 158.15 141.65) + (xy 158.15 141.55) + (xy 158.25 141.55) + (xy 158.25 141.45) + (xy 158.15 141.45) + (xy 158.15 141.35) + (xy 158.05 141.35) + (xy 158.05 141.25) + (xy 157.95 141.25) + (xy 157.95 141.15) + (xy 157.85 141.15) + (xy 157.85 141.05) + (xy 157.75 141.05) + (xy 106.75 141.05) + (xy 106.75 141.15) + (xy 106.65 141.15) + (xy 106.65 141.45) + (xy 106.55 141.45) + (xy 106.55 141.65) + (xy 106.35 141.65) + (xy 106.35 141.75) + (xy 106.15 141.75) + (xy 106.15 141.85) + (xy 105.85 141.85) + (xy 105.85 141.75) + (xy 105.65 141.75) + (xy 105.65 141.65) + (xy 105.45 141.65) + (xy 105.45 141.45) + (xy 105.35 141.45) + (xy 105.35 141.15) + (xy 105.25 141.15) + (xy 105.25 141.05) + (xy 105.35 141.05) + (xy 105.35 140.75) + (xy 105.45 140.75) + (xy 105.45 140.65) + (xy 105.55 140.65) + (xy 105.55 140.55) + (xy 105.65 140.55) + (xy 105.65 140.45) + (xy 106.35 140.45) + (xy 106.35 140.55) + (xy 106.45 140.55) + (xy 106.45 140.65) + (xy 106.55 140.65) + (xy 106.55 140.75) + (xy 106.65 140.75) + (xy 106.65 141.05) + (xy 106.75 141.05) + (xy 157.75 141.05) + (xy 157.75 140.95) + (xy 157.65 140.95) + (xy 157.65 140.85) + (xy 157.55 140.85) + (xy 157.55 140.75) + (xy 157.45 140.75) + (xy 157.45 140.65) + (xy 157.35 140.65) + (xy 157.35 140.55) + (xy 157.25 140.55) + (xy 157.25 140.45) + (xy 157.15 140.45) + (xy 157.15 140.35) + (xy 157.05 140.35) + (xy 157.05 140.25) + (xy 156.95 140.25) + (xy 156.95 140.15) + (xy 156.85 140.15) + (xy 156.85 140.05) + (xy 156.75 140.05) + (xy 156.75 139.95) + (xy 156.65 139.95) + (xy 156.65 139.85) + (xy 156.55 139.85) + (xy 156.55 139.75) + (xy 156.45 139.75) + (xy 156.45 139.65) + (xy 156.35 139.65) + (xy 156.35 139.55) + (xy 156.25 139.55) + (xy 156.25 139.45) + (xy 156.15 139.45) + (xy 156.15 139.35) + (xy 156.05 139.35) + (xy 156.05 139.25) + (xy 155.95 139.25) + (xy 155.95 139.15) + (xy 155.85 139.15) + (xy 155.85 139.05) + (xy 155.75 139.05) + (xy 155.75 138.95) + (xy 155.65 138.95) + (xy 155.65 138.85) + (xy 155.55 138.85) + (xy 155.55 138.75) + (xy 155.45 138.75) + (xy 155.45 138.65) + (xy 155.35 138.65) + (xy 155.35 138.55) + (xy 155.25 138.55) + (xy 155.25 138.45) + (xy 155.15 138.45) + (xy 155.15 138.35) + (xy 155.05 138.35) + (xy 155.05 138.25) + (xy 154.95 138.25) + (xy 154.95 138.15) + (xy 154.85 138.15) + (xy 154.85 138.05) + (xy 154.75 138.05) + (xy 154.75 137.95) + (xy 154.65 137.95) + (xy 154.65 137.85) + (xy 154.55 137.85) + (xy 154.55 137.75) + (xy 154.45 137.75) + (xy 154.45 137.65) + (xy 154.35 137.65) + (xy 154.35 137.55) + (xy 154.25 137.55) + (xy 154.25 137.45) + (xy 154.15 137.45) + (xy 154.15 137.35) + (xy 154.05 137.35) + (xy 124.85 137.35) + (xy 124.85 138.05) + (xy 124.75 138.05) + (xy 124.75 138.15) + (xy 124.65 138.15) + (xy 124.65 138.25) + (xy 124.55 138.25) + (xy 124.55 138.35) + (xy 123.85 138.35) + (xy 123.85 138.25) + (xy 118.05 138.25) + (xy 118.05 138.35) + (xy 117.35 138.35) + (xy 117.35 138.25) + (xy 117.25 138.25) + (xy 117.25 138.15) + (xy 117.15 138.15) + (xy 117.15 138.05) + (xy 117.05 138.05) + (xy 117.05 137.35) + (xy 117.15 137.35) + (xy 117.15 137.25) + (xy 117.25 137.25) + (xy 117.25 137.15) + (xy 117.35 137.15) + (xy 117.35 137.05) + (xy 118.05 137.05) + (xy 118.05 137.15) + (xy 123.85 137.15) + (xy 123.85 137.05) + (xy 124.55 137.05) + (xy 124.55 137.15) + (xy 124.65 137.15) + (xy 124.65 137.25) + (xy 124.75 137.25) + (xy 124.75 137.35) + (xy 124.85 137.35) + (xy 154.05 137.35) + (xy 154.05 137.25) + (xy 153.95 137.25) + (xy 153.95 137.15) + (xy 153.85 137.15) + (xy 153.85 137.05) + (xy 153.75 137.05) + (xy 153.75 136.95) + (xy 153.65 136.95) + (xy 153.65 136.85) + (xy 153.55 136.85) + (xy 153.55 136.75) + (xy 153.45 136.75) + (xy 153.45 136.65) + (xy 153.35 136.65) + (xy 153.35 136.55) + (xy 153.25 136.55) + (xy 153.25 136.45) + (xy 153.15 136.45) + (xy 153.15 136.35) + (xy 153.05 136.35) + (xy 153.05 136.25) + (xy 152.95 136.25) + (xy 152.95 136.15) + (xy 152.85 136.15) + (xy 152.85 136.05) + (xy 152.75 136.05) + (xy 152.75 135.95) + (xy 152.65 135.95) + (xy 152.65 135.85) + (xy 152.55 135.85) + (xy 152.55 135.75) + (xy 152.45 135.75) + (xy 152.45 135.65) + (xy 152.35 135.65) + (xy 152.35 135.55) + (xy 152.25 135.55) + (xy 152.25 135.45) + (xy 152.15 135.45) + (xy 152.15 135.35) + (xy 152.05 135.35) + (xy 152.05 135.25) + (xy 151.95 135.25) + (xy 151.95 135.15) + (xy 151.85 135.15) + (xy 151.85 135.05) + (xy 151.75 135.05) + (xy 151.75 134.95) + (xy 151.65 134.95) + (xy 151.65 134.85) + (xy 151.55 134.85) + (xy 151.55 134.75) + (xy 151.45 134.75) + (xy 151.45 134.65) + (xy 151.35 134.65) + (xy 151.35 134.55) + (xy 151.25 134.55) + (xy 151.25 134.45) + (xy 151.15 134.45) + (xy 151.15 134.35) + (xy 151.05 134.35) + (xy 151.05 134.25) + (xy 150.95 134.25) + (xy 150.95 134.15) + (xy 150.85 134.15) + (xy 150.85 134.05) + (xy 150.75 134.05) + (xy 150.75 133.95) + (xy 150.65 133.95) + (xy 150.65 133.85) + (xy 150.55 133.85) + (xy 150.55 133.75) + (xy 150.45 133.75) + (xy 150.45 133.65) + (xy 150.35 133.65) + (xy 150.35 133.55) + (xy 150.25 133.55) + (xy 150.25 133.45) + (xy 150.15 133.45) + (xy 150.15 133.35) + (xy 150.05 133.35) + (xy 150.05 133.25) + (xy 149.95 133.25) + (xy 149.95 133.15) + (xy 149.85 133.15) + (xy 149.85 133.05) + (xy 149.75 133.05) + (xy 149.75 132.95) + (xy 149.65 132.95) + (xy 149.65 132.85) + (xy 149.55 132.85) + (xy 149.55 132.75) + (xy 149.45 132.75) + (xy 149.45 132.65) + (xy 149.35 132.65) + (xy 149.35 132.55) + (xy 149.25 132.55) + (xy 149.25 132.45) + (xy 149.15 132.45) + (xy 149.15 132.35) + (xy 149.05 132.35) + (xy 149.05 132.25) + (xy 148.95 132.25) + (xy 148.95 132.15) + (xy 148.85 132.15) + (xy 148.85 132.05) + (xy 148.75 132.05) + (xy 148.75 131.95) + (xy 148.65 131.95) + (xy 148.65 131.85) + (xy 148.55 131.85) + (xy 148.55 131.75) + (xy 148.45 131.75) + (xy 148.45 131.65) + (xy 148.35 131.65) + (xy 148.35 131.55) + (xy 148.25 131.55) + (xy 148.25 131.45) + (xy 148.15 131.45) + (xy 148.15 131.35) + (xy 148.05 131.35) + (xy 148.05 131.25) + (xy 147.95 131.25) + (xy 147.95 131.15) + (xy 147.85 131.15) + (xy 147.85 131.05) + (xy 147.75 131.05) + (xy 147.75 130.95) + (xy 147.65 130.95) + (xy 147.65 130.85) + (xy 147.55 130.85) + (xy 147.55 130.75) + (xy 147.45 130.75) + (xy 147.45 130.85) + (xy 147.35 130.85) + (xy 147.35 130.95) + (xy 147.25 130.95) + (xy 147.25 132.35) + (xy 147.35 132.35) + (xy 147.35 132.45) + (xy 147.45 132.45) + (xy 147.45 133.15) + (xy 147.35 133.15) + (xy 147.35 133.25) + (xy 147.25 133.25) + (xy 147.25 133.35) + (xy 147.15 133.35) + (xy 147.15 133.45) + (xy 146.45 133.45) + (xy 146.45 133.35) + (xy 146.35 133.35) + (xy 146.35 133.25) + (xy 146.25 133.25) + (xy 146.25 133.15) + (xy 146.15 133.15) + (xy 146.15 132.45) + (xy 146.25 132.45) + (xy 146.25 132.35) + (xy 146.35 132.35) + (xy 146.35 128.05) + (xy 146.45 128.05) + (xy 146.45 127.95) + (xy 146.55 127.95) + (xy 146.55 127.85) + (xy 146.65 127.85) + (xy 146.65 127.75) + (xy 146.55 127.75) + (xy 146.55 127.65) + (xy 146.45 127.65) + (xy 146.45 127.55) + (xy 146.35 127.55) + (xy 146.35 127.45) + (xy 146.25 127.45) + (xy 146.25 127.35) + (xy 146.15 127.35) + (xy 146.15 127.25) + (xy 145.75 127.25) + (xy 145.75 127.15) + (xy 145.65 127.15) + (xy 145.65 127.05) + (xy 145.55 127.05) + (xy 145.55 126.95) + (xy 145.45 126.95) + (xy 145.45 126.25) + (xy 145.55 126.25) + (xy 145.55 126.15) + (xy 145.65 126.15) + (xy 145.65 126.05) + (xy 145.75 126.05) + (xy 145.75 125.95) + (xy 146.45 125.95) + (xy 146.45 126.05) + (xy 146.55 126.05) + (xy 146.55 126.15) + (xy 146.65 126.15) + (xy 146.65 126.25) + (xy 146.75 126.25) + (xy 146.75 126.65) + (xy 146.85 126.65) + (xy 146.85 126.75) + (xy 146.95 126.75) + (xy 146.95 126.85) + (xy 147.05 126.85) + (xy 147.05 126.95) + (xy 147.15 126.95) + (xy 147.15 127.05) + (xy 147.25 127.05) + (xy 147.25 127.15) + (xy 147.65 127.15) + (xy 147.65 127.25) + (xy 147.75 127.25) + (xy 147.75 127.35) + (xy 147.85 127.35) + (xy 147.85 127.45) + (xy 147.95 127.45) + (xy 147.95 128.15) + (xy 147.85 128.15) + (xy 147.85 128.25) + (xy 147.75 128.25) + (xy 147.75 128.35) + (xy 147.65 128.35) + (xy 147.65 128.45) + (xy 147.45 128.45) + (xy 147.45 128.55) + (xy 147.35 128.55) + (xy 147.35 128.65) + (xy 147.25 128.65) + (xy 147.25 129.05) + (xy 147.35 129.05) + (xy 147.35 129.15) + (xy 147.45 129.15) + (xy 147.45 129.25) + (xy 147.85 129.25) + (xy 147.85 129.35) + (xy 147.95 129.35) + (xy 147.95 129.45) + (xy 148.05 129.45) + (xy 148.05 129.55) + (xy 148.15 129.55) + (xy 148.15 129.75) + (xy 148.25 129.75) + (xy 148.25 129.85) + (xy 148.35 129.85) + (xy 148.35 129.95) + (xy 148.45 129.95) + (xy 148.45 130.05) + (xy 148.55 130.05) + (xy 148.55 130.15) + (xy 148.65 130.15) + (xy 148.65 130.25) + (xy 148.75 130.25) + (xy 148.75 130.35) + (xy 148.85 130.35) + (xy 148.85 130.45) + (xy 148.95 130.45) + (xy 148.95 130.55) + (xy 149.05 130.55) + (xy 149.05 130.65) + (xy 149.15 130.65) + (xy 149.15 130.75) + (xy 149.25 130.75) + (xy 149.25 130.85) + (xy 149.35 130.85) + (xy 149.35 130.95) + (xy 149.45 130.95) + (xy 149.45 131.05) + (xy 149.55 131.05) + (xy 149.55 131.15) + (xy 149.65 131.15) + (xy 149.65 131.25) + (xy 149.75 131.25) + (xy 149.75 131.35) + (xy 149.85 131.35) + (xy 149.85 131.45) + (xy 149.95 131.45) + (xy 149.95 131.55) + (xy 150.05 131.55) + (xy 150.05 131.65) + (xy 150.15 131.65) + (xy 150.15 131.75) + (xy 150.25 131.75) + (xy 150.25 131.85) + (xy 150.35 131.85) + (xy 150.35 131.95) + (xy 150.45 131.95) + (xy 150.45 132.05) + (xy 150.55 132.05) + (xy 150.55 132.15) + (xy 150.65 132.15) + (xy 150.65 132.25) + (xy 150.75 132.25) + (xy 150.75 132.35) + (xy 150.85 132.35) + (xy 150.85 132.45) + (xy 150.95 132.45) + (xy 150.95 132.55) + (xy 151.05 132.55) + (xy 151.05 132.65) + (xy 151.15 132.65) + (xy 151.15 132.75) + (xy 151.25 132.75) + (xy 151.25 132.85) + (xy 151.35 132.85) + (xy 151.35 132.95) + (xy 151.45 132.95) + (xy 151.45 133.05) + (xy 151.55 133.05) + (xy 151.55 133.15) + (xy 151.65 133.15) + (xy 151.65 133.05) + (xy 151.75 133.05) + (xy 151.75 132.95) + (xy 151.85 132.95) + (xy 151.85 132.45) + (xy 151.95 132.45) + (xy 151.95 132.35) + (xy 152.05 132.35) + (xy 152.05 131.65) + (xy 151.95 131.65) + (xy 151.95 131.55) + (xy 151.85 131.55) + (xy 151.85 130.85) + (xy 151.95 130.85) + (xy 151.95 130.75) + (xy 152.05 130.75) + (xy 152.05 130.65) + (xy 152.15 130.65) + (xy 152.15 130.55) + (xy 152.85 130.55) + (xy 152.85 130.65) + (xy 152.95 130.65) + (xy 152.95 130.75) + (xy 153.05 130.75) + (xy 153.05 130.65) + (xy 153.15 130.65) + (xy 153.15 130.55) + (xy 153.85 130.55) + (xy 153.85 130.65) + (xy 153.95 130.65) + (xy 153.95 130.75) + (xy 154.05 130.75) + (xy 154.05 130.85) + (xy 154.15 130.85) + (xy 154.15 131.55) + (xy 154.05 131.55) + (xy 154.05 131.65) + (xy 153.95 131.65) + (xy 153.95 132.35) + (xy 154.05 132.35) + (xy 154.05 132.45) + (xy 154.15 132.45) + (xy 154.15 133.15) + (xy 154.05 133.15) + (xy 154.05 133.25) + (xy 153.95 133.25) + (xy 153.95 133.35) + (xy 153.85 133.35) + (xy 153.85 133.45) + (xy 153.15 133.45) + (xy 153.15 133.35) + (xy 153.05 133.35) + (xy 153.05 133.25) + (xy 152.95 133.25) + (xy 152.95 133.35) + (xy 152.85 133.35) + (xy 152.85 133.45) + (xy 152.35 133.45) + (xy 152.35 133.55) + (xy 152.25 133.55) + (xy 152.25 133.65) + (xy 152.15 133.65) + (xy 152.15 133.75) + (xy 152.25 133.75) + (xy 152.25 133.85) + (xy 152.35 133.85) + (xy 152.35 133.95) + (xy 152.45 133.95) + (xy 152.45 134.05) + (xy 152.55 134.05) + (xy 152.55 134.15) + (xy 152.65 134.15) + (xy 152.65 134.25) + (xy 152.75 134.25) + (xy 152.75 134.35) + (xy 152.85 134.35) + (xy 152.85 134.45) + (xy 152.95 134.45) + (xy 152.95 134.55) + (xy 153.05 134.55) + (xy 153.05 134.65) + (xy 153.15 134.65) + (xy 153.15 134.75) + (xy 153.25 134.75) + (xy 153.25 134.85) + (xy 153.35 134.85) + (xy 153.35 134.95) + (xy 153.45 134.95) + (xy 153.45 135.05) + (xy 153.55 135.05) + (xy 153.55 135.15) + (xy 153.65 135.15) + (xy 153.65 135.25) + (xy 153.75 135.25) + (xy 153.75 135.35) + (xy 153.85 135.35) + (xy 153.85 135.45) + (xy 153.95 135.45) + (xy 153.95 135.55) + (xy 154.05 135.55) + (xy 154.05 135.65) + (xy 154.15 135.65) + (xy 154.15 135.75) + (xy 154.25 135.75) + (xy 154.25 135.85) + (xy 154.35 135.85) + (xy 154.35 135.95) + (xy 154.45 135.95) + (xy 154.45 136.05) + (xy 154.55 136.05) + (xy 154.55 136.15) + (xy 154.65 136.15) + (xy 154.65 136.25) + (xy 154.75 136.25) + (xy 154.75 136.35) + (xy 154.85 136.35) + (xy 154.85 136.45) + (xy 154.95 136.45) + (xy 154.95 136.55) + (xy 155.05 136.55) + (xy 155.05 136.65) + (xy 155.15 136.65) + (xy 155.15 136.75) + (xy 155.25 136.75) + (xy 155.25 136.85) + (xy 155.35 136.85) + (xy 155.35 136.95) + (xy 155.45 136.95) + (xy 155.45 137.05) + (xy 155.55 137.05) + (xy 155.55 137.15) + (xy 155.65 137.15) + (xy 155.65 137.25) + (xy 155.75 137.25) + (xy 155.75 137.35) + (xy 155.85 137.35) + (xy 155.85 137.45) + (xy 155.95 137.45) + (xy 155.95 137.55) + (xy 156.05 137.55) + (xy 156.05 137.65) + (xy 156.15 137.65) + (xy 156.15 137.75) + (xy 156.25 137.75) + (xy 156.25 137.85) + (xy 156.35 137.85) + (xy 156.35 137.95) + (xy 156.45 137.95) + (xy 156.45 138.05) + (xy 156.55 138.05) + (xy 156.55 138.15) + (xy 156.65 138.15) + (xy 156.65 138.25) + (xy 156.75 138.25) + (xy 156.75 138.35) + (xy 156.85 138.35) + (xy 156.85 138.45) + (xy 156.95 138.45) + (xy 156.95 138.55) + (xy 157.05 138.55) + (xy 157.05 138.65) + (xy 157.15 138.65) + (xy 157.15 138.75) + (xy 157.25 138.75) + (xy 157.25 138.85) + (xy 157.35 138.85) + (xy 157.35 138.95) + (xy 157.45 138.95) + (xy 157.45 139.05) + (xy 157.55 139.05) + (xy 157.55 139.15) + (xy 157.65 139.15) + (xy 157.65 139.25) + (xy 157.75 139.25) + (xy 157.75 139.35) + (xy 157.85 139.35) + (xy 157.85 139.45) + (xy 157.95 139.45) + (xy 157.95 139.55) + (xy 158.05 139.55) + (xy 158.05 139.65) + (xy 158.15 139.65) + (xy 158.15 139.75) + (xy 158.25 139.75) + (xy 158.25 139.85) + (xy 158.35 139.85) + (xy 158.35 139.95) + (xy 158.45 139.95) + (xy 158.45 140.05) + (xy 158.55 140.05) + (xy 158.55 140.15) + (xy 158.65 140.15) + (xy 158.65 140.25) + (xy 158.75 140.25) + (xy 158.75 140.35) + (xy 158.85 140.35) + (xy 158.85 140.45) + (xy 158.95 140.45) + (xy 158.95 140.55) + (xy 159.05 140.55) + (xy 159.05 140.65) + (xy 159.15 140.65) + (xy 159.15 140.75) + (xy 159.25 140.75) + (xy 159.25 140.85) + (xy 159.45 140.85) + (xy 159.45 140.95) + (xy 159.55 140.95) + (xy 159.55 141.05) + (xy 159.65 141.05) + (xy 159.65 141.15) + (xy 159.75 141.15) + (xy 175.15 141.15) + (xy 175.15 139.65) + (xy 175.25 139.65) + (xy 175.25 139.55) + (xy 175.35 139.55) + (xy 175.35 139.45) + (xy 177.65 139.45) + (xy 177.65 139.55) + (xy 177.75 139.55) + (xy 177.75 139.65) + (xy 177.85 139.65) + (xy 179.45 139.65) + (xy 179.45 134.35) + (xy 159.75 134.35) + (xy 159.75 135.05) + (xy 159.65 135.05) + (xy 159.65 135.15) + (xy 159.55 135.15) + (xy 159.55 135.25) + (xy 159.45 135.25) + (xy 159.45 135.35) + (xy 159.05 135.35) + (xy 159.05 135.45) + (xy 158.95 135.45) + (xy 158.95 135.55) + (xy 158.85 135.55) + (xy 158.85 135.65) + (xy 158.75 135.65) + (xy 158.75 135.75) + (xy 158.65 135.75) + (xy 158.65 135.85) + (xy 158.55 135.85) + (xy 158.55 135.95) + (xy 158.45 135.95) + (xy 158.45 136.05) + (xy 158.35 136.05) + (xy 158.35 136.15) + (xy 158.25 136.15) + (xy 158.25 136.25) + (xy 158.15 136.25) + (xy 158.15 136.65) + (xy 158.05 136.65) + (xy 158.05 136.75) + (xy 157.95 136.75) + (xy 157.95 136.85) + (xy 157.85 136.85) + (xy 157.85 136.95) + (xy 157.15 136.95) + (xy 157.15 136.85) + (xy 157.05 136.85) + (xy 157.05 136.75) + (xy 156.95 136.75) + (xy 156.95 136.65) + (xy 156.85 136.65) + (xy 156.85 135.95) + (xy 156.95 135.95) + (xy 156.95 135.85) + (xy 157.05 135.85) + (xy 157.05 135.75) + (xy 157.15 135.75) + (xy 157.15 135.65) + (xy 157.55 135.65) + (xy 157.55 135.55) + (xy 157.65 135.55) + (xy 157.65 135.45) + (xy 157.75 135.45) + (xy 157.75 135.35) + (xy 157.85 135.35) + (xy 157.85 135.25) + (xy 157.95 135.25) + (xy 157.95 135.15) + (xy 158.05 135.15) + (xy 158.05 135.05) + (xy 158.15 135.05) + (xy 158.15 134.95) + (xy 158.25 134.95) + (xy 158.25 134.85) + (xy 158.35 134.85) + (xy 158.35 134.75) + (xy 158.45 134.75) + (xy 158.45 134.35) + (xy 158.55 134.35) + (xy 158.55 134.25) + (xy 158.65 134.25) + (xy 158.65 134.15) + (xy 158.75 134.15) + (xy 158.75 134.05) + (xy 159.45 134.05) + (xy 159.45 134.15) + (xy 159.55 134.15) + (xy 159.55 134.25) + (xy 159.65 134.25) + (xy 159.65 134.35) + (xy 159.75 134.35) + (xy 179.45 134.35) + (xy 179.45 128.55) + (xy 177.85 128.55) + (xy 177.85 130.65) + (xy 177.75 130.65) + (xy 177.75 130.75) + (xy 177.65 130.75) + (xy 177.65 130.85) + (xy 177.55 130.85) + (xy 177.55 130.95) + (xy 177.45 130.95) + (xy 177.45 131.05) + (xy 177.35 131.05) + (xy 177.35 131.15) + (xy 177.45 131.15) + (xy 177.45 131.25) + (xy 177.55 131.25) + (xy 177.55 131.35) + (xy 177.65 131.35) + (xy 177.65 131.55) + (xy 177.75 131.55) + (xy 177.75 131.75) + (xy 177.85 131.75) + (xy 177.85 132.45) + (xy 177.75 132.45) + (xy 177.75 132.65) + (xy 177.65 132.65) + (xy 177.65 132.85) + (xy 177.55 132.85) + (xy 177.55 132.95) + (xy 177.45 132.95) + (xy 177.45 133.05) + (xy 177.35 133.05) + (xy 177.35 133.15) + (xy 177.15 133.15) + (xy 177.15 133.25) + (xy 176.85 133.25) + (xy 176.85 133.35) + (xy 176.15 133.35) + (xy 176.15 133.25) + (xy 175.85 133.25) + (xy 175.85 133.15) + (xy 175.65 133.15) + (xy 175.65 133.05) + (xy 175.55 133.05) + (xy 175.55 132.95) + (xy 175.45 132.95) + (xy 175.45 132.85) + (xy 175.35 132.85) + (xy 175.35 132.65) + (xy 175.25 132.65) + (xy 175.25 132.45) + (xy 175.15 132.45) + (xy 175.15 131.75) + (xy 175.25 131.75) + (xy 175.25 131.55) + (xy 175.15 131.55) + (xy 175.15 131.45) + (xy 175.05 131.45) + (xy 175.05 131.35) + (xy 174.95 131.35) + (xy 174.95 131.25) + (xy 174.85 131.25) + (xy 174.85 131.15) + (xy 174.75 131.15) + (xy 174.75 131.05) + (xy 174.65 131.05) + (xy 174.65 130.95) + (xy 174.55 130.95) + (xy 174.55 130.85) + (xy 174.45 130.85) + (xy 174.45 130.75) + (xy 174.35 130.75) + (xy 174.35 130.65) + (xy 174.25 130.65) + (xy 174.25 130.55) + (xy 174.15 130.55) + (xy 174.15 130.45) + (xy 174.05 130.45) + (xy 174.05 130.35) + (xy 173.95 130.35) + (xy 173.95 130.25) + (xy 173.85 130.25) + (xy 173.85 130.15) + (xy 173.75 130.15) + (xy 173.75 130.05) + (xy 173.65 130.05) + (xy 173.65 129.95) + (xy 173.55 129.95) + (xy 173.55 129.85) + (xy 173.45 129.85) + (xy 173.45 129.75) + (xy 173.35 129.75) + (xy 173.35 129.65) + (xy 173.25 129.65) + (xy 173.25 129.55) + (xy 173.15 129.55) + (xy 173.15 129.45) + (xy 173.05 129.45) + (xy 173.05 129.35) + (xy 172.95 129.35) + (xy 172.95 129.25) + (xy 172.85 129.25) + (xy 172.85 129.15) + (xy 172.75 129.15) + (xy 172.75 129.05) + (xy 172.65 129.05) + (xy 172.65 128.95) + (xy 172.55 128.95) + (xy 172.55 128.85) + (xy 172.45 128.85) + (xy 172.45 128.75) + (xy 172.35 128.75) + (xy 172.35 128.65) + (xy 172.25 128.65) + (xy 172.25 128.55) + (xy 172.15 128.55) + (xy 172.15 128.45) + (xy 172.05 128.45) + (xy 172.05 128.35) + (xy 171.95 128.35) + (xy 171.95 128.25) + (xy 171.85 128.25) + (xy 171.85 128.15) + (xy 171.75 128.15) + (xy 171.75 128.05) + (xy 171.35 128.05) + (xy 171.35 127.95) + (xy 171.25 127.95) + (xy 171.25 127.85) + (xy 171.15 127.85) + (xy 171.15 127.75) + (xy 171.05 127.75) + (xy 171.05 127.05) + (xy 171.15 127.05) + (xy 171.15 126.95) + (xy 171.25 126.95) + (xy 171.25 126.85) + (xy 171.35 126.85) + (xy 171.35 126.75) + (xy 172.05 126.75) + (xy 172.05 126.85) + (xy 172.15 126.85) + (xy 172.15 126.95) + (xy 172.25 126.95) + (xy 172.25 127.05) + (xy 172.35 127.05) + (xy 172.35 127.45) + (xy 172.45 127.45) + (xy 172.45 127.55) + (xy 172.55 127.55) + (xy 172.55 127.65) + (xy 172.65 127.65) + (xy 172.65 127.75) + (xy 172.75 127.75) + (xy 172.75 127.85) + (xy 172.85 127.85) + (xy 172.85 127.95) + (xy 172.95 127.95) + (xy 172.95 128.05) + (xy 173.05 128.05) + (xy 173.05 128.15) + (xy 173.15 128.15) + (xy 173.15 128.25) + (xy 173.25 128.25) + (xy 173.25 128.35) + (xy 173.35 128.35) + (xy 173.35 128.45) + (xy 173.45 128.45) + (xy 173.45 128.55) + (xy 173.55 128.55) + (xy 173.55 128.65) + (xy 173.65 128.65) + (xy 173.65 128.75) + (xy 173.75 128.75) + (xy 173.75 128.85) + (xy 173.85 128.85) + (xy 173.85 128.95) + (xy 173.95 128.95) + (xy 173.95 129.05) + (xy 174.05 129.05) + (xy 174.05 129.15) + (xy 174.15 129.15) + (xy 174.15 129.25) + (xy 174.25 129.25) + (xy 174.25 129.35) + (xy 174.35 129.35) + (xy 174.35 129.45) + (xy 174.45 129.45) + (xy 174.45 129.55) + (xy 174.55 129.55) + (xy 174.55 129.65) + (xy 174.65 129.65) + (xy 174.65 129.75) + (xy 174.75 129.75) + (xy 174.75 129.85) + (xy 174.85 129.85) + (xy 174.85 129.95) + (xy 174.95 129.95) + (xy 174.95 129.85) + (xy 175.05 129.85) + (xy 175.05 129.75) + (xy 175.15 129.75) + (xy 175.15 128.55) + (xy 175.25 128.55) + (xy 175.25 128.45) + (xy 175.35 128.45) + (xy 175.35 128.35) + (xy 177.65 128.35) + (xy 177.65 128.45) + (xy 177.75 128.45) + (xy 177.75 128.55) + (xy 177.85 128.55) + (xy 179.45 128.55) + (xy 179.45 122.45) + (xy 168.05 122.45) + (xy 168.05 123.05) + (xy 167.95 123.05) + (xy 167.95 123.45) + (xy 167.85 123.45) + (xy 167.85 123.65) + (xy 167.75 123.65) + (xy 167.75 123.85) + (xy 167.65 123.85) + (xy 167.65 123.95) + (xy 167.55 123.95) + (xy 167.55 124.15) + (xy 167.45 124.15) + (xy 167.45 124.25) + (xy 167.35 124.25) + (xy 167.35 124.35) + (xy 167.15 124.35) + (xy 167.15 124.45) + (xy 167.05 124.45) + (xy 167.05 124.55) + (xy 166.85 124.55) + (xy 166.85 124.65) + (xy 166.55 124.65) + (xy 166.55 124.75) + (xy 165.55 124.75) + (xy 165.55 124.65) + (xy 165.25 124.65) + (xy 165.25 124.55) + (xy 165.05 124.55) + (xy 165.05 124.45) + (xy 164.95 124.45) + (xy 164.95 124.35) + (xy 164.75 124.35) + (xy 164.75 124.25) + (xy 164.65 124.25) + (xy 164.65 124.15) + (xy 164.55 124.15) + (xy 164.55 124.05) + (xy 164.45 124.05) + (xy 164.45 123.85) + (xy 164.35 123.85) + (xy 164.35 123.75) + (xy 164.25 123.75) + (xy 164.25 123.55) + (xy 164.15 123.55) + (xy 164.15 123.15) + (xy 164.05 123.15) + (xy 164.05 122.35) + (xy 164.15 122.35) + (xy 164.15 122.05) + (xy 164.25 122.05) + (xy 164.25 121.85) + (xy 164.35 121.85) + (xy 164.35 121.65) + (xy 164.45 121.65) + (xy 164.45 121.55) + (xy 164.55 121.55) + (xy 164.55 121.45) + (xy 164.65 121.45) + (xy 164.65 121.35) + (xy 164.75 121.35) + (xy 164.75 121.25) + (xy 164.85 121.25) + (xy 164.85 121.15) + (xy 164.95 121.15) + (xy 164.95 121.05) + (xy 165.15 121.05) + (xy 165.15 120.95) + (xy 165.45 120.95) + (xy 165.45 120.85) + (xy 166.65 120.85) + (xy 166.65 120.95) + (xy 166.95 120.95) + (xy 166.95 121.05) + (xy 167.05 121.05) + (xy 167.05 121.15) + (xy 167.25 121.15) + (xy 167.25 121.25) + (xy 167.35 121.25) + (xy 167.35 121.35) + (xy 167.45 121.35) + (xy 167.45 121.45) + (xy 167.55 121.45) + (xy 167.55 121.55) + (xy 167.65 121.55) + (xy 167.65 121.75) + (xy 167.75 121.75) + (xy 167.75 121.85) + (xy 167.85 121.85) + (xy 167.85 122.15) + (xy 167.95 122.15) + (xy 167.95 122.45) + (xy 168.05 122.45) + (xy 179.45 122.45) + (xy 179.45 117.45) + (xy 177.85 117.45) + (xy 177.85 119.55) + (xy 177.75 119.55) + (xy 177.75 119.65) + (xy 177.65 119.65) + (xy 177.65 119.75) + (xy 177.55 119.75) + (xy 177.55 119.85) + (xy 177.45 119.85) + (xy 177.45 119.95) + (xy 177.35 119.95) + (xy 177.35 120.05) + (xy 177.45 120.05) + (xy 177.45 120.15) + (xy 177.55 120.15) + (xy 177.55 120.25) + (xy 177.65 120.25) + (xy 177.65 120.45) + (xy 177.75 120.45) + (xy 177.75 120.65) + (xy 177.85 120.65) + (xy 177.85 121.35) + (xy 177.75 121.35) + (xy 177.75 121.55) + (xy 177.65 121.55) + (xy 177.65 121.75) + (xy 177.55 121.75) + (xy 177.55 121.85) + (xy 177.45 121.85) + (xy 177.45 121.95) + (xy 177.35 121.95) + (xy 177.35 122.05) + (xy 177.15 122.05) + (xy 177.15 122.15) + (xy 176.85 122.15) + (xy 176.85 122.25) + (xy 176.15 122.25) + (xy 176.15 122.15) + (xy 175.85 122.15) + (xy 175.85 122.05) + (xy 175.65 122.05) + (xy 175.65 121.95) + (xy 175.55 121.95) + (xy 175.55 121.85) + (xy 175.45 121.85) + (xy 175.45 121.75) + (xy 175.35 121.75) + (xy 175.35 121.55) + (xy 175.25 121.55) + (xy 175.25 121.35) + (xy 175.15 121.35) + (xy 175.15 120.65) + (xy 175.25 120.65) + (xy 175.25 120.45) + (xy 175.35 120.45) + (xy 175.35 120.25) + (xy 175.45 120.25) + (xy 175.45 120.15) + (xy 175.55 120.15) + (xy 175.55 120.05) + (xy 175.65 120.05) + (xy 175.65 119.95) + (xy 175.55 119.95) + (xy 175.55 119.85) + (xy 175.45 119.85) + (xy 175.45 119.75) + (xy 175.35 119.75) + (xy 175.35 119.65) + (xy 175.25 119.65) + (xy 175.25 119.55) + (xy 175.15 119.55) + (xy 175.15 117.45) + (xy 175.25 117.45) + (xy 175.25 117.35) + (xy 175.35 117.35) + (xy 175.35 117.25) + (xy 177.65 117.25) + (xy 177.65 117.35) + (xy 177.75 117.35) + (xy 177.75 117.45) + (xy 177.85 117.45) + (xy 179.45 117.45) + (xy 179.45 102.35) + (xy 177.85 102.35) + (xy 177.85 104.45) + (xy 177.75 104.45) + (xy 177.75 104.55) + (xy 177.65 104.55) + (xy 177.65 104.65) + (xy 177.55 104.65) + (xy 177.55 104.75) + (xy 177.45 104.75) + (xy 177.45 104.85) + (xy 177.35 104.85) + (xy 177.35 104.95) + (xy 177.45 104.95) + (xy 177.45 105.05) + (xy 177.55 105.05) + (xy 177.55 105.15) + (xy 177.65 105.15) + (xy 177.65 105.35) + (xy 177.75 105.35) + (xy 177.75 105.55) + (xy 177.85 105.55) + (xy 177.85 106.25) + (xy 177.75 106.25) + (xy 177.75 106.45) + (xy 177.65 106.45) + (xy 177.65 106.65) + (xy 177.55 106.65) + (xy 177.55 106.75) + (xy 177.45 106.75) + (xy 177.45 106.85) + (xy 177.35 106.85) + (xy 177.35 106.95) + (xy 177.25 106.95) + (xy 177.25 107.05) + (xy 177.15 107.05) + (xy 177.15 107.25) + (xy 177.25 107.25) + (xy 177.25 107.35) + (xy 177.35 107.35) + (xy 177.35 107.45) + (xy 177.45 107.45) + (xy 177.45 107.55) + (xy 177.55 107.55) + (xy 177.55 107.65) + (xy 177.65 107.65) + (xy 177.65 107.85) + (xy 177.75 107.85) + (xy 177.75 108.05) + (xy 177.85 108.05) + (xy 177.85 108.75) + (xy 177.75 108.75) + (xy 177.75 108.95) + (xy 177.65 108.95) + (xy 177.65 109.15) + (xy 177.55 109.15) + (xy 177.55 109.25) + (xy 177.45 109.25) + (xy 177.45 109.35) + (xy 177.35 109.35) + (xy 177.35 109.45) + (xy 177.25 109.45) + (xy 177.25 109.55) + (xy 177.15 109.55) + (xy 177.15 109.75) + (xy 177.25 109.75) + (xy 177.25 109.85) + (xy 177.35 109.85) + (xy 177.35 109.95) + (xy 177.45 109.95) + (xy 177.45 110.05) + (xy 177.55 110.05) + (xy 177.55 110.15) + (xy 177.65 110.15) + (xy 177.65 110.35) + (xy 177.75 110.35) + (xy 177.75 110.55) + (xy 177.85 110.55) + (xy 177.85 111.25) + (xy 177.75 111.25) + (xy 177.75 111.45) + (xy 177.65 111.45) + (xy 177.65 111.65) + (xy 177.55 111.65) + (xy 177.55 111.75) + (xy 177.45 111.75) + (xy 177.45 111.85) + (xy 177.35 111.85) + (xy 177.35 111.95) + (xy 177.15 111.95) + (xy 177.15 112.05) + (xy 176.85 112.05) + (xy 176.85 112.15) + (xy 176.15 112.15) + (xy 176.15 112.05) + (xy 175.85 112.05) + (xy 175.85 111.95) + (xy 175.65 111.95) + (xy 175.65 111.85) + (xy 175.55 111.85) + (xy 175.55 111.75) + (xy 175.45 111.75) + (xy 175.45 111.65) + (xy 175.35 111.65) + (xy 175.35 111.45) + (xy 175.25 111.45) + (xy 175.25 111.25) + (xy 175.15 111.25) + (xy 175.15 110.55) + (xy 175.25 110.55) + (xy 175.25 110.35) + (xy 175.35 110.35) + (xy 175.35 110.15) + (xy 175.45 110.15) + (xy 175.45 110.05) + (xy 175.55 110.05) + (xy 175.55 109.95) + (xy 175.65 109.95) + (xy 175.65 109.85) + (xy 175.75 109.85) + (xy 175.75 109.75) + (xy 175.85 109.75) + (xy 175.85 109.55) + (xy 175.75 109.55) + (xy 175.75 109.45) + (xy 175.65 109.45) + (xy 175.65 109.35) + (xy 175.55 109.35) + (xy 175.55 109.25) + (xy 175.45 109.25) + (xy 175.45 109.15) + (xy 175.35 109.15) + (xy 175.35 108.95) + (xy 175.25 108.95) + (xy 175.25 108.75) + (xy 175.15 108.75) + (xy 175.15 108.05) + (xy 175.25 108.05) + (xy 175.25 107.85) + (xy 175.35 107.85) + (xy 175.35 107.65) + (xy 175.45 107.65) + (xy 175.45 107.55) + (xy 175.55 107.55) + (xy 175.55 107.45) + (xy 175.65 107.45) + (xy 175.65 107.35) + (xy 175.75 107.35) + (xy 175.75 107.25) + (xy 175.85 107.25) + (xy 175.85 107.05) + (xy 175.75 107.05) + (xy 175.75 106.95) + (xy 175.65 106.95) + (xy 175.65 106.85) + (xy 175.55 106.85) + (xy 175.55 106.75) + (xy 175.45 106.75) + (xy 175.45 106.65) + (xy 175.35 106.65) + (xy 175.35 106.45) + (xy 175.25 106.45) + (xy 175.25 106.25) + (xy 175.15 106.25) + (xy 175.15 105.55) + (xy 175.25 105.55) + (xy 175.25 105.35) + (xy 175.35 105.35) + (xy 175.35 105.15) + (xy 175.45 105.15) + (xy 175.45 105.05) + (xy 175.55 105.05) + (xy 175.55 104.95) + (xy 175.65 104.95) + (xy 175.65 104.85) + (xy 175.55 104.85) + (xy 175.55 104.75) + (xy 175.45 104.75) + (xy 175.45 104.65) + (xy 175.35 104.65) + (xy 175.35 104.55) + (xy 175.25 104.55) + (xy 175.25 104.45) + (xy 175.15 104.45) + (xy 175.15 102.35) + (xy 175.25 102.35) + (xy 175.25 102.25) + (xy 175.35 102.25) + (xy 175.35 102.15) + (xy 177.65 102.15) + (xy 177.65 102.25) + (xy 177.75 102.25) + (xy 177.75 102.35) + (xy 177.85 102.35) + (xy 179.45 102.35) + (xy 179.45 100.75) + (xy 179.35 100.75) + (xy 179.35 100.65) + (xy 179.25 100.65) + (xy 179.25 100.55) + (xy 157.35 100.55) + (xy 157.35 100.65) + (xy 157.25 100.65) + (xy 157.25 100.75) + (xy 157.15 100.75) + (xy 157.15 100.85) + (xy 157.25 100.85) + (xy 157.25 100.95) + (xy 157.35 100.95) + (xy 157.35 101.05) + (xy 157.45 101.05) + (xy 157.45 101.15) + (xy 157.55 101.15) + (xy 157.55 101.35) + (xy 157.65 101.35) + (xy 157.65 101.55) + (xy 157.75 101.55) + (xy 157.75 102.25) + (xy 157.65 102.25) + (xy 157.65 102.55) + (xy 157.75 102.55) + (xy 157.75 102.65) + (xy 157.85 102.65) + (xy 157.85 102.85) + (xy 157.95 102.85) + (xy 157.95 110.65) + (xy 158.05 110.65) + (xy 158.05 110.75) + (xy 158.15 110.75) + (xy 158.15 110.85) + (xy 158.35 110.85) + (xy 158.35 110.95) + (xy 158.45 110.95) + (xy 158.45 111.05) + (xy 158.55 111.05) + (xy 158.55 111.15) + (xy 158.65 111.15) + (xy 158.65 111.85) + (xy 158.55 111.85) + (xy 158.55 111.95) + (xy 158.45 111.95) + (xy 158.45 112.05) + (xy 158.35 112.05) + (xy 158.35 112.15) + (xy 157.65 112.15) + (xy 157.65 112.05) + (xy 157.55 112.05) + (xy 157.55 111.95) + (xy 157.45 111.95) + (xy 157.45 111.85) + (xy 157.25 111.85) + (xy 157.25 111.95) + (xy 157.15 111.95) + (xy 157.15 112.05) + (xy 157.05 112.05) + (xy 157.05 112.15) + (xy 156.95 112.15) + (xy 156.95 112.25) + (xy 156.85 112.25) + (xy 156.85 112.35) + (xy 156.75 112.35) + (xy 156.75 112.45) + (xy 156.65 112.45) + (xy 156.65 112.55) + (xy 156.55 112.55) + (xy 156.55 112.65) + (xy 156.45 112.65) + (xy 156.45 112.75) + (xy 156.35 112.75) + (xy 156.35 112.85) + (xy 156.25 112.85) + (xy 156.25 112.95) + (xy 156.15 112.95) + (xy 156.15 113.05) + (xy 156.05 113.05) + (xy 156.05 113.15) + (xy 155.95 113.15) + (xy 155.95 113.25) + (xy 155.85 113.25) + (xy 155.85 113.35) + (xy 155.95 113.35) + (xy 155.95 113.45) + (xy 156.05 113.45) + (xy 156.05 113.55) + (xy 156.15 113.55) + (xy 156.15 113.45) + (xy 156.95 113.45) + (xy 156.95 113.55) + (xy 157.15 113.55) + (xy 157.15 113.65) + (xy 157.35 113.65) + (xy 157.35 113.75) + (xy 157.45 113.75) + (xy 157.45 113.85) + (xy 157.55 113.85) + (xy 157.55 114.05) + (xy 157.65 114.05) + (xy 157.65 114.15) + (xy 157.75 114.15) + (xy 157.75 114.25) + (xy 157.85 114.25) + (xy 157.85 114.15) + (xy 157.95 114.15) + (xy 157.95 114.05) + (xy 158.05 114.05) + (xy 158.05 113.95) + (xy 158.15 113.95) + (xy 158.15 113.85) + (xy 158.25 113.85) + (xy 158.25 113.75) + (xy 158.35 113.75) + (xy 158.35 113.65) + (xy 158.45 113.65) + (xy 158.45 113.55) + (xy 158.65 113.55) + (xy 158.65 113.45) + (xy 159.55 113.45) + (xy 159.55 113.55) + (xy 159.75 113.55) + (xy 159.75 113.65) + (xy 159.85 113.65) + (xy 159.85 113.75) + (xy 159.95 113.75) + (xy 159.95 113.85) + (xy 160.05 113.85) + (xy 160.05 113.95) + (xy 160.15 113.95) + (xy 160.15 114.15) + (xy 160.25 114.15) + (xy 160.25 115.05) + (xy 160.15 115.05) + (xy 160.15 115.25) + (xy 160.05 115.25) + (xy 160.05 115.35) + (xy 159.95 115.35) + (xy 159.95 115.45) + (xy 159.85 115.45) + (xy 159.85 115.55) + (xy 159.75 115.55) + (xy 159.75 115.65) + (xy 159.55 115.65) + (xy 159.55 115.75) + (xy 159.45 115.75) + (xy 159.45 115.85) + (xy 159.35 115.85) + (xy 159.35 115.95) + (xy 159.25 115.95) + (xy 159.25 122.05) + (xy 159.35 122.05) + (xy 159.35 122.15) + (xy 159.45 122.15) + (xy 159.45 122.25) + (xy 160.15 122.25) + (xy 160.15 122.35) + (xy 160.25 122.35) + (xy 160.25 122.45) + (xy 160.35 122.45) + (xy 160.35 122.55) + (xy 160.45 122.55) + (xy 160.45 123.25) + (xy 160.35 123.25) + (xy 160.35 123.35) + (xy 160.25 123.35) + (xy 160.25 124.45) + (xy 160.35 124.45) + (xy 160.35 124.55) + (xy 160.45 124.55) + (xy 160.45 125.25) + (xy 160.35 125.25) + (xy 160.35 125.35) + (xy 160.25 125.35) + (xy 160.25 125.45) + (xy 160.15 125.45) + (xy 160.15 125.55) + (xy 159.45 125.55) + (xy 159.45 125.65) + (xy 159.35 125.65) + (xy 159.35 125.75) + (xy 159.25 125.75) + (xy 159.25 131.45) + (xy 159.15 131.45) + (xy 159.15 131.55) + (xy 159.05 131.55) + (xy 159.05 131.65) + (xy 158.95 131.65) + (xy 158.95 131.75) + (xy 158.85 131.75) + (xy 158.85 131.85) + (xy 158.75 131.85) + (xy 158.75 131.95) + (xy 158.65 131.95) + (xy 158.65 132.05) + (xy 158.55 132.05) + (xy 158.55 132.15) + (xy 158.45 132.15) + (xy 158.45 132.25) + (xy 158.35 132.25) + (xy 158.35 132.35) + (xy 158.25 132.35) + (xy 158.25 132.45) + (xy 158.15 132.45) + (xy 158.15 132.55) + (xy 158.05 132.55) + (xy 158.05 132.65) + (xy 157.95 132.65) + (xy 157.95 132.75) + (xy 157.85 132.75) + (xy 157.85 132.85) + (xy 157.75 132.85) + (xy 157.75 132.95) + (xy 157.65 132.95) + (xy 157.65 133.05) + (xy 157.55 133.05) + (xy 157.55 133.15) + (xy 157.45 133.15) + (xy 157.45 133.25) + (xy 157.35 133.25) + (xy 157.35 133.35) + (xy 157.25 133.35) + (xy 157.25 133.45) + (xy 157.15 133.45) + (xy 157.15 133.55) + (xy 157.05 133.55) + (xy 157.05 133.65) + (xy 156.95 133.65) + (xy 156.95 133.75) + (xy 156.85 133.75) + (xy 156.85 133.85) + (xy 156.75 133.85) + (xy 156.75 133.95) + (xy 156.65 133.95) + (xy 156.65 134.05) + (xy 156.55 134.05) + (xy 156.55 134.15) + (xy 156.45 134.15) + (xy 156.45 134.25) + (xy 156.35 134.25) + (xy 156.35 134.35) + (xy 156.25 134.35) + (xy 156.25 134.45) + (xy 156.15 134.45) + (xy 156.15 134.85) + (xy 156.05 134.85) + (xy 156.05 134.95) + (xy 155.95 134.95) + (xy 155.95 135.05) + (xy 155.85 135.05) + (xy 155.85 135.15) + (xy 155.15 135.15) + (xy 155.15 135.05) + (xy 155.05 135.05) + (xy 155.05 134.95) + (xy 154.95 134.95) + (xy 154.95 134.85) + (xy 154.85 134.85) + (xy 154.85 134.15) + (xy 154.95 134.15) + (xy 154.95 134.05) + (xy 155.05 134.05) + (xy 155.05 133.95) + (xy 155.15 133.95) + (xy 155.15 133.85) + (xy 155.55 133.85) + (xy 155.55 133.75) + (xy 155.65 133.75) + (xy 155.65 133.65) + (xy 155.75 133.65) + (xy 155.75 133.55) + (xy 155.85 133.55) + (xy 155.85 133.35) + (xy 155.75 133.35) + (xy 155.75 133.25) + (xy 155.65 133.25) + (xy 155.65 133.15) + (xy 155.55 133.15) + (xy 155.55 132.45) + (xy 155.65 132.45) + (xy 155.65 132.35) + (xy 155.75 132.35) + (xy 155.75 115.45) + (xy 155.65 115.45) + (xy 155.65 115.25) + (xy 155.55 115.25) + (xy 155.55 115.15) + (xy 155.45 115.15) + (xy 155.45 115.05) + (xy 155.35 115.05) + (xy 155.35 114.95) + (xy 155.25 114.95) + (xy 155.25 115.05) + (xy 155.15 115.05) + (xy 155.15 115.15) + (xy 155.05 115.15) + (xy 155.05 115.25) + (xy 154.95 115.25) + (xy 154.95 115.35) + (xy 154.85 115.35) + (xy 154.85 115.45) + (xy 154.75 115.45) + (xy 154.75 115.55) + (xy 154.65 115.55) + (xy 154.65 115.65) + (xy 154.45 115.65) + (xy 154.45 115.75) + (xy 153.55 115.75) + (xy 153.55 115.65) + (xy 153.35 115.65) + (xy 153.35 115.55) + (xy 153.25 115.55) + (xy 153.25 115.45) + (xy 153.15 115.45) + (xy 153.15 115.35) + (xy 153.05 115.35) + (xy 153.05 115.15) + (xy 152.95 115.15) + (xy 152.95 115.05) + (xy 152.85 115.05) + (xy 152.85 114.95) + (xy 152.65 114.95) + (xy 152.65 115.05) + (xy 152.55 115.05) + (xy 152.55 115.15) + (xy 152.45 115.15) + (xy 152.45 115.35) + (xy 152.35 115.35) + (xy 152.35 115.45) + (xy 152.25 115.45) + (xy 152.25 115.55) + (xy 152.15 115.55) + (xy 152.15 115.65) + (xy 151.95 115.65) + (xy 151.95 115.75) + (xy 151.05 115.75) + (xy 151.05 115.65) + (xy 150.85 115.65) + (xy 150.85 115.55) + (xy 150.75 115.55) + (xy 150.75 115.45) + (xy 150.65 115.45) + (xy 150.65 115.35) + (xy 150.55 115.35) + (xy 150.55 115.25) + (xy 150.45 115.25) + (xy 150.45 115.15) + (xy 150.35 115.15) + (xy 150.35 115.05) + (xy 150.25 115.05) + (xy 150.25 114.95) + (xy 150.15 114.95) + (xy 150.15 115.05) + (xy 150.05 115.05) + (xy 150.05 115.15) + (xy 149.95 115.15) + (xy 149.95 115.25) + (xy 149.85 115.25) + (xy 149.85 115.45) + (xy 149.75 115.45) + (xy 149.75 115.55) + (xy 149.55 115.55) + (xy 149.55 115.65) + (xy 149.35 115.65) + (xy 149.35 115.75) + (xy 148.55 115.75) + (xy 148.55 115.65) + (xy 148.35 115.65) + (xy 148.35 115.55) + (xy 148.15 115.55) + (xy 148.15 115.45) + (xy 148.05 115.45) + (xy 148.05 115.35) + (xy 147.95 115.35) + (xy 147.95 115.15) + (xy 147.85 115.15) + (xy 147.85 115.05) + (xy 147.75 115.05) + (xy 147.75 114.95) + (xy 147.65 114.95) + (xy 147.65 115.05) + (xy 147.55 115.05) + (xy 147.55 115.15) + (xy 147.45 115.15) + (xy 147.45 115.25) + (xy 147.35 115.25) + (xy 147.35 115.35) + (xy 147.25 115.35) + (xy 147.25 115.45) + (xy 147.15 115.45) + (xy 147.15 115.55) + (xy 147.05 115.55) + (xy 147.05 115.65) + (xy 146.85 115.65) + (xy 146.85 115.75) + (xy 145.95 115.75) + (xy 145.95 115.65) + (xy 145.75 115.65) + (xy 145.75 115.55) + (xy 145.65 115.55) + (xy 145.65 115.45) + (xy 145.55 115.45) + (xy 145.55 115.35) + (xy 145.45 115.35) + (xy 145.45 115.25) + (xy 145.35 115.25) + (xy 145.35 115.15) + (xy 145.25 115.15) + (xy 145.25 115.05) + (xy 145.15 115.05) + (xy 145.15 114.95) + (xy 145.05 114.95) + (xy 145.05 115.05) + (xy 144.95 115.05) + (xy 144.95 115.15) + (xy 144.85 115.15) + (xy 144.85 115.35) + (xy 144.75 115.35) + (xy 144.75 115.45) + (xy 144.65 115.45) + (xy 144.65 115.55) + (xy 144.45 115.55) + (xy 144.45 115.65) + (xy 144.25 115.65) + (xy 144.25 115.75) + (xy 143.45 115.75) + (xy 143.45 115.65) + (xy 143.25 115.65) + (xy 143.25 115.55) + (xy 143.05 115.55) + (xy 143.05 115.45) + (xy 142.95 115.45) + (xy 142.95 115.25) + (xy 142.85 115.25) + (xy 142.85 115.15) + (xy 142.75 115.15) + (xy 142.75 115.05) + (xy 142.65 115.05) + (xy 142.65 114.95) + (xy 142.55 114.95) + (xy 142.55 115.05) + (xy 142.45 115.05) + (xy 142.45 115.15) + (xy 142.35 115.15) + (xy 142.35 115.25) + (xy 142.25 115.25) + (xy 142.25 115.35) + (xy 142.15 115.35) + (xy 142.15 115.45) + (xy 142.05 115.45) + (xy 142.05 115.55) + (xy 141.95 115.55) + (xy 141.95 115.65) + (xy 141.75 115.65) + (xy 141.75 115.75) + (xy 140.85 115.75) + (xy 140.85 115.65) + (xy 140.65 115.65) + (xy 140.65 115.55) + (xy 140.55 115.55) + (xy 140.55 115.45) + (xy 140.45 115.45) + (xy 140.45 115.35) + (xy 140.35 115.35) + (xy 140.35 115.15) + (xy 140.25 115.15) + (xy 140.25 114.95) + (xy 140.15 114.95) + (xy 140.15 114.25) + (xy 140.25 114.25) + (xy 140.25 114.05) + (xy 140.15 114.05) + (xy 140.15 113.95) + (xy 140.05 113.95) + (xy 140.05 113.85) + (xy 139.35 113.85) + (xy 139.35 113.95) + (xy 139.25 113.95) + (xy 139.25 114.05) + (xy 139.15 114.05) + (xy 139.15 114.15) + (xy 139.25 114.15) + (xy 139.25 115.05) + (xy 139.15 115.05) + (xy 139.15 115.25) + (xy 139.05 115.25) + (xy 139.05 115.35) + (xy 138.95 115.35) + (xy 138.95 115.45) + (xy 138.85 115.45) + (xy 138.85 115.55) + (xy 138.75 115.55) + (xy 138.75 115.65) + (xy 138.55 115.65) + (xy 138.55 115.75) + (xy 137.65 115.75) + (xy 137.65 115.65) + (xy 137.45 115.65) + (xy 137.45 115.55) + (xy 137.35 115.55) + (xy 137.35 115.45) + (xy 137.25 115.45) + (xy 137.25 115.35) + (xy 137.15 115.35) + (xy 137.15 115.25) + (xy 137.05 115.25) + (xy 137.05 115.15) + (xy 136.95 115.15) + (xy 136.95 115.05) + (xy 136.85 115.05) + (xy 136.85 114.95) + (xy 136.75 114.95) + (xy 136.75 115.05) + (xy 136.65 115.05) + (xy 136.65 115.15) + (xy 136.55 115.15) + (xy 136.55 115.35) + (xy 136.45 115.35) + (xy 136.45 115.45) + (xy 136.35 115.45) + (xy 136.35 115.55) + (xy 136.15 115.55) + (xy 136.15 115.65) + (xy 135.95 115.65) + (xy 135.95 115.75) + (xy 135.65 115.75) + (xy 135.65 115.85) + (xy 135.55 115.85) + (xy 135.55 115.95) + (xy 135.45 115.95) + (xy 135.45 129.85) + (xy 135.55 129.85) + (xy 135.55 129.95) + (xy 135.65 129.95) + (xy 135.65 130.05) + (xy 136.05 130.05) + (xy 136.05 130.15) + (xy 136.15 130.15) + (xy 136.15 130.25) + (xy 136.25 130.25) + (xy 136.25 130.35) + (xy 136.35 130.35) + (xy 136.35 131.05) + (xy 136.25 131.05) + (xy 136.25 131.15) + (xy 136.15 131.15) + (xy 136.15 131.75) + (xy 136.25 131.75) + (xy 136.25 131.85) + (xy 136.35 131.85) + (xy 136.35 131.95) + (xy 136.45 131.95) + (xy 136.45 132.25) + (xy 136.55 132.25) + (xy 136.55 132.35) + (xy 136.65 132.35) + (xy 136.65 132.45) + (xy 136.75 132.45) + (xy 136.75 132.35) + (xy 136.85 132.35) + (xy 136.85 132.25) + (xy 136.95 132.25) + (xy 136.95 132.15) + (xy 137.05 132.15) + (xy 137.05 132.05) + (xy 137.15 132.05) + (xy 137.15 131.95) + (xy 137.25 131.95) + (xy 137.25 131.85) + (xy 137.35 131.85) + (xy 137.35 131.75) + (xy 137.45 131.75) + (xy 137.45 131.65) + (xy 137.55 131.65) + (xy 137.55 131.55) + (xy 137.65 131.55) + (xy 137.65 131.45) + (xy 137.75 131.45) + (xy 137.75 131.35) + (xy 137.85 131.35) + (xy 137.85 131.25) + (xy 137.95 131.25) + (xy 137.95 131.15) + (xy 138.05 131.15) + (xy 138.05 131.05) + (xy 138.15 131.05) + (xy 138.15 130.95) + (xy 138.25 130.95) + (xy 138.25 130.85) + (xy 138.35 130.85) + (xy 138.35 130.75) + (xy 138.45 130.75) + (xy 138.45 130.65) + (xy 138.55 130.65) + (xy 138.55 130.55) + (xy 138.65 130.55) + (xy 138.65 130.45) + (xy 138.75 130.45) + (xy 138.75 130.35) + (xy 138.85 130.35) + (xy 138.85 130.25) + (xy 139.05 130.25) + (xy 139.05 130.15) + (xy 139.15 130.15) + (xy 139.15 130.05) + (xy 139.25 130.05) + (xy 139.25 129.45) + (xy 139.35 129.45) + (xy 139.35 129.35) + (xy 139.45 129.35) + (xy 139.45 129.25) + (xy 139.55 129.25) + (xy 139.55 129.15) + (xy 140.25 129.15) + (xy 140.25 129.25) + (xy 140.35 129.25) + (xy 140.35 129.35) + (xy 140.45 129.35) + (xy 140.45 129.45) + (xy 140.55 129.45) + (xy 140.55 129.85) + (xy 140.65 129.85) + (xy 140.65 129.95) + (xy 140.75 129.95) + (xy 140.75 130.05) + (xy 140.85 130.05) + (xy 140.85 130.15) + (xy 140.95 130.15) + (xy 140.95 131.85) + (xy 140.85 131.85) + (xy 140.85 131.95) + (xy 140.75 131.95) + (xy 140.75 132.05) + (xy 140.65 132.05) + (xy 140.65 132.15) + (xy 140.55 132.15) + (xy 140.55 132.25) + (xy 140.45 132.25) + (xy 140.45 132.65) + (xy 140.35 132.65) + (xy 140.35 132.75) + (xy 140.25 132.75) + (xy 140.25 132.85) + (xy 140.15 132.85) + (xy 140.15 132.95) + (xy 139.45 132.95) + (xy 139.45 132.85) + (xy 139.35 132.85) + (xy 139.35 132.75) + (xy 139.25 132.75) + (xy 139.25 132.65) + (xy 139.15 132.65) + (xy 139.15 132.15) + (xy 139.05 132.15) + (xy 139.05 132.05) + (xy 138.95 132.05) + (xy 138.95 131.95) + (xy 138.85 131.95) + (xy 138.85 132.05) + (xy 138.75 132.05) + (xy 138.75 132.15) + (xy 138.65 132.15) + (xy 138.65 132.25) + (xy 138.55 132.25) + (xy 138.55 132.35) + (xy 138.45 132.35) + (xy 138.45 132.45) + (xy 138.35 132.45) + (xy 138.35 132.55) + (xy 138.25 132.55) + (xy 138.25 132.65) + (xy 138.15 132.65) + (xy 138.15 132.75) + (xy 138.05 132.75) + (xy 138.05 132.85) + (xy 137.95 132.85) + (xy 137.95 132.95) + (xy 137.85 132.95) + (xy 137.85 133.05) + (xy 137.75 133.05) + (xy 137.75 133.15) + (xy 137.65 133.15) + (xy 137.65 133.25) + (xy 137.55 133.25) + (xy 137.55 133.35) + (xy 137.45 133.35) + (xy 137.45 133.45) + (xy 137.35 133.45) + (xy 137.35 133.55) + (xy 137.25 133.55) + (xy 137.25 133.65) + (xy 137.15 133.65) + (xy 137.15 133.85) + (xy 137.05 133.85) + (xy 137.05 133.95) + (xy 136.95 133.95) + (xy 136.95 134.05) + (xy 136.85 134.05) + (xy 136.85 134.15) + (xy 136.15 134.15) + (xy 136.15 134.05) + (xy 136.05 134.05) + (xy 136.05 133.95) + (xy 135.95 133.95) + (xy 135.95 133.85) + (xy 135.85 133.85) + (xy 135.85 133.95) + (xy 135.75 133.95) + (xy 135.75 134.05) + (xy 135.65 134.05) + (xy 135.65 134.65) + (xy 135.55 134.65) + (xy 135.55 134.75) + (xy 135.45 134.75) + (xy 135.45 134.85) + (xy 135.35 134.85) + (xy 135.35 135.05) + (xy 135.45 135.05) + (xy 135.45 135.15) + (xy 135.55 135.15) + (xy 135.55 135.25) + (xy 135.65 135.25) + (xy 135.65 135.35) + (xy 135.75 135.35) + (xy 135.75 135.45) + (xy 135.85 135.45) + (xy 135.85 135.55) + (xy 135.95 135.55) + (xy 135.95 135.65) + (xy 136.05 135.65) + (xy 136.05 135.75) + (xy 136.45 135.75) + (xy 136.45 135.85) + (xy 136.55 135.85) + (xy 136.55 135.95) + (xy 136.65 135.95) + (xy 136.65 136.05) + (xy 136.75 136.05) + (xy 136.75 136.75) + (xy 136.65 136.75) + (xy 136.65 136.85) + (xy 136.55 136.85) + (xy 136.55 136.95) + (xy 136.45 136.95) + (xy 136.45 137.05) + (xy 135.75 137.05) + (xy 135.75 136.95) + (xy 135.65 136.95) + (xy 135.65 136.85) + (xy 135.55 136.85) + (xy 135.55 136.75) + (xy 135.45 136.75) + (xy 135.45 136.35) + (xy 135.35 136.35) + (xy 135.35 136.25) + (xy 135.25 136.25) + (xy 135.25 136.15) + (xy 135.15 136.15) + (xy 135.15 136.05) + (xy 135.05 136.05) + (xy 135.05 135.95) + (xy 134.95 135.95) + (xy 134.95 135.85) + (xy 134.85 135.85) + (xy 134.85 135.75) + (xy 134.75 135.75) + (xy 134.75 135.65) + (xy 134.65 135.65) + (xy 134.65 135.55) + (xy 134.55 135.55) + (xy 134.55 135.45) + (xy 134.45 135.45) + (xy 134.45 135.35) + (xy 134.35 135.35) + (xy 134.35 135.25) + (xy 134.25 135.25) + (xy 134.25 135.15) + (xy 134.15 135.15) + (xy 134.15 135.05) + (xy 134.05 135.05) + (xy 134.05 134.95) + (xy 133.95 134.95) + (xy 133.95 134.85) + (xy 133.85 134.85) + (xy 133.85 134.45) + (xy 124.25 134.45) + (xy 124.25 135.55) + (xy 124.15 135.55) + (xy 124.15 135.85) + (xy 124.05 135.85) + (xy 124.05 136.05) + (xy 123.95 136.05) + (xy 123.95 136.15) + (xy 123.85 136.15) + (xy 123.85 136.25) + (xy 123.75 136.25) + (xy 123.75 136.35) + (xy 123.65 136.35) + (xy 123.65 136.45) + (xy 123.35 136.45) + (xy 123.35 136.55) + (xy 122.85 136.55) + (xy 122.85 136.45) + (xy 122.55 136.45) + (xy 122.55 136.35) + (xy 122.35 136.35) + (xy 122.35 136.25) + (xy 122.25 136.25) + (xy 122.25 136.15) + (xy 122.15 136.15) + (xy 122.15 135.95) + (xy 122.05 135.95) + (xy 122.05 135.75) + (xy 121.95 135.75) + (xy 121.95 134.25) + (xy 122.05 134.25) + (xy 122.05 134.05) + (xy 122.15 134.05) + (xy 122.15 133.85) + (xy 122.25 133.85) + (xy 122.25 133.75) + (xy 119.15 133.75) + (xy 119.15 136.25) + (xy 119.05 136.25) + (xy 119.05 136.45) + (xy 118.85 136.45) + (xy 118.85 136.55) + (xy 117.15 136.55) + (xy 117.15 136.45) + (xy 116.95 136.45) + (xy 116.95 136.25) + (xy 116.85 136.25) + (xy 116.85 133.75) + (xy 116.95 133.75) + (xy 116.95 133.55) + (xy 117.15 133.55) + (xy 117.15 133.45) + (xy 118.85 133.45) + (xy 118.85 133.55) + (xy 119.05 133.55) + (xy 119.05 133.75) + (xy 119.15 133.75) + (xy 122.25 133.75) + (xy 122.35 133.75) + (xy 122.35 133.65) + (xy 122.55 133.65) + (xy 122.55 133.55) + (xy 122.85 133.55) + (xy 122.85 133.45) + (xy 123.35 133.45) + (xy 123.35 133.55) + (xy 123.65 133.55) + (xy 123.65 133.65) + (xy 123.75 133.65) + (xy 123.75 133.75) + (xy 123.85 133.75) + (xy 123.85 133.85) + (xy 123.95 133.85) + (xy 123.95 133.95) + (xy 124.05 133.95) + (xy 124.05 134.15) + (xy 124.15 134.15) + (xy 124.15 134.45) + (xy 124.25 134.45) + (xy 133.85 134.45) + (xy 133.85 129.25) + (xy 107.45 129.25) + (xy 107.45 129.75) + (xy 107.35 129.75) + (xy 107.35 130.05) + (xy 107.25 130.05) + (xy 107.25 130.25) + (xy 107.15 130.25) + (xy 107.15 130.35) + (xy 107.05 130.35) + (xy 107.05 130.55) + (xy 106.85 130.55) + (xy 106.85 130.65) + (xy 106.75 130.65) + (xy 106.75 130.75) + (xy 106.55 130.75) + (xy 106.55 130.85) + (xy 104.05 130.85) + (xy 104.05 130.75) + (xy 103.85 130.75) + (xy 103.85 130.65) + (xy 103.75 130.65) + (xy 103.75 130.55) + (xy 103.55 130.55) + (xy 103.55 130.35) + (xy 103.45 130.35) + (xy 103.45 130.25) + (xy 103.35 130.25) + (xy 103.35 130.05) + (xy 103.25 130.05) + (xy 103.25 129.75) + (xy 103.15 129.75) + (xy 103.15 129.25) + (xy 103.25 129.25) + (xy 103.25 128.95) + (xy 103.35 128.95) + (xy 103.35 128.75) + (xy 103.45 128.75) + (xy 103.45 128.65) + (xy 103.55 128.65) + (xy 103.55 128.45) + (xy 103.75 128.45) + (xy 103.75 128.35) + (xy 103.85 128.35) + (xy 103.85 128.25) + (xy 104.05 128.25) + (xy 104.05 128.15) + (xy 106.55 128.15) + (xy 106.55 128.25) + (xy 106.75 128.25) + (xy 106.75 128.35) + (xy 106.85 128.35) + (xy 106.85 128.45) + (xy 107.05 128.45) + (xy 107.05 128.65) + (xy 107.15 128.65) + (xy 107.15 128.75) + (xy 107.25 128.75) + (xy 107.25 128.95) + (xy 107.35 128.95) + (xy 107.35 129.25) + (xy 107.45 129.25) + (xy 133.85 129.25) + (xy 133.85 122.75) + (xy 113.65 122.75) + (xy 113.65 127.25) + (xy 113.55 127.25) + (xy 113.55 127.35) + (xy 111.05 127.35) + (xy 111.05 127.25) + (xy 110.95 127.25) + (xy 110.95 124.55) + (xy 104.45 124.55) + (xy 104.45 125.45) + (xy 104.35 125.45) + (xy 104.35 125.65) + (xy 104.25 125.65) + (xy 104.25 125.75) + (xy 104.15 125.75) + (xy 104.15 125.85) + (xy 104.05 125.85) + (xy 104.05 125.95) + (xy 103.95 125.95) + (xy 103.95 126.05) + (xy 103.75 126.05) + (xy 103.75 126.15) + (xy 102.85 126.15) + (xy 102.85 126.05) + (xy 102.65 126.05) + (xy 102.65 125.95) + (xy 102.55 125.95) + (xy 102.55 125.85) + (xy 102.45 125.85) + (xy 102.45 125.75) + (xy 102.35 125.75) + (xy 102.35 125.65) + (xy 102.25 125.65) + (xy 102.25 125.45) + (xy 102.15 125.45) + (xy 102.15 124.55) + (xy 102.25 124.55) + (xy 102.25 124.35) + (xy 102.35 124.35) + (xy 102.35 124.25) + (xy 102.45 124.25) + (xy 102.45 124.15) + (xy 102.55 124.15) + (xy 102.55 124.05) + (xy 102.65 124.05) + (xy 102.65 123.95) + (xy 102.85 123.95) + (xy 102.85 123.85) + (xy 103.75 123.85) + (xy 103.75 123.95) + (xy 103.95 123.95) + (xy 103.95 124.05) + (xy 104.05 124.05) + (xy 104.05 124.15) + (xy 104.15 124.15) + (xy 104.15 124.25) + (xy 104.25 124.25) + (xy 104.25 124.35) + (xy 104.35 124.35) + (xy 104.35 124.55) + (xy 104.45 124.55) + (xy 110.95 124.55) + (xy 110.95 122.75) + (xy 111.05 122.75) + (xy 111.05 122.65) + (xy 113.55 122.65) + (xy 113.55 122.75) + (xy 113.65 122.75) + (xy 133.85 122.75) + (xy 133.85 120.25) + (xy 107.45 120.25) + (xy 107.45 120.75) + (xy 107.35 120.75) + (xy 107.35 121.05) + (xy 107.25 121.05) + (xy 107.25 121.25) + (xy 107.15 121.25) + (xy 107.15 121.35) + (xy 107.05 121.35) + (xy 107.05 121.55) + (xy 106.85 121.55) + (xy 106.85 121.65) + (xy 106.75 121.65) + (xy 106.75 121.75) + (xy 106.55 121.75) + (xy 106.55 121.85) + (xy 104.05 121.85) + (xy 104.05 121.75) + (xy 103.85 121.75) + (xy 103.85 121.65) + (xy 103.75 121.65) + (xy 103.75 121.55) + (xy 103.55 121.55) + (xy 103.55 121.35) + (xy 103.45 121.35) + (xy 103.45 121.25) + (xy 103.35 121.25) + (xy 103.35 121.05) + (xy 103.25 121.05) + (xy 103.25 120.75) + (xy 103.15 120.75) + (xy 103.15 120.25) + (xy 103.25 120.25) + (xy 103.25 119.95) + (xy 103.35 119.95) + (xy 103.35 119.75) + (xy 103.45 119.75) + (xy 103.45 119.65) + (xy 103.55 119.65) + (xy 103.55 119.45) + (xy 103.75 119.45) + (xy 103.75 119.35) + (xy 103.85 119.35) + (xy 103.85 119.25) + (xy 104.05 119.25) + (xy 104.05 119.15) + (xy 106.55 119.15) + (xy 106.55 119.25) + (xy 106.75 119.25) + (xy 106.75 119.35) + (xy 106.85 119.35) + (xy 106.85 119.45) + (xy 107.05 119.45) + (xy 107.05 119.65) + (xy 107.15 119.65) + (xy 107.15 119.75) + (xy 107.25 119.75) + (xy 107.25 119.95) + (xy 107.35 119.95) + (xy 107.35 120.25) + (xy 107.45 120.25) + (xy 133.85 120.25) + (xy 133.85 118.45) + (xy 133.75 118.45) + (xy 133.75 118.35) + (xy 133.65 118.35) + (xy 133.65 117.65) + (xy 133.75 117.65) + (xy 133.75 117.55) + (xy 133.85 117.55) + (xy 133.85 117.45) + (xy 133.95 117.45) + (xy 133.95 117.35) + (xy 134.35 117.35) + (xy 134.35 117.25) + (xy 134.45 117.25) + (xy 134.45 117.15) + (xy 134.55 117.15) + (xy 134.55 115.15) + (xy 134.45 115.15) + (xy 134.45 115.05) + (xy 134.35 115.05) + (xy 134.35 114.95) + (xy 134.25 114.95) + (xy 134.25 115.05) + (xy 134.15 115.05) + (xy 134.15 115.15) + (xy 134.05 115.15) + (xy 134.05 115.25) + (xy 133.95 115.25) + (xy 133.95 115.35) + (xy 133.85 115.35) + (xy 133.85 115.45) + (xy 133.75 115.45) + (xy 133.75 115.55) + (xy 133.65 115.55) + (xy 133.65 115.65) + (xy 133.45 115.65) + (xy 133.45 115.75) + (xy 132.55 115.75) + (xy 132.55 115.65) + (xy 132.35 115.65) + (xy 132.35 115.55) + (xy 132.25 115.55) + (xy 132.25 115.45) + (xy 132.15 115.45) + (xy 132.15 115.35) + (xy 132.05 115.35) + (xy 132.05 115.15) + (xy 131.95 115.15) + (xy 131.95 115.05) + (xy 131.85 115.05) + (xy 131.85 114.95) + (xy 131.65 114.95) + (xy 131.65 115.05) + (xy 131.55 115.05) + (xy 131.55 115.15) + (xy 131.45 115.15) + (xy 131.45 115.35) + (xy 131.35 115.35) + (xy 131.35 115.45) + (xy 131.25 115.45) + (xy 131.25 115.55) + (xy 131.15 115.55) + (xy 131.15 115.65) + (xy 130.95 115.65) + (xy 130.95 115.75) + (xy 130.05 115.75) + (xy 130.05 115.65) + (xy 129.85 115.65) + (xy 129.85 115.55) + (xy 129.75 115.55) + (xy 129.75 115.45) + (xy 129.65 115.45) + (xy 129.65 115.35) + (xy 129.55 115.35) + (xy 129.55 115.25) + (xy 129.45 115.25) + (xy 129.45 115.15) + (xy 129.35 115.15) + (xy 129.35 115.05) + (xy 129.25 115.05) + (xy 129.25 114.95) + (xy 129.15 114.95) + (xy 129.15 115.05) + (xy 129.05 115.05) + (xy 129.05 115.15) + (xy 128.95 115.15) + (xy 128.95 115.25) + (xy 128.85 115.25) + (xy 128.85 115.45) + (xy 128.75 115.45) + (xy 128.75 115.55) + (xy 128.55 115.55) + (xy 128.55 115.65) + (xy 128.35 115.65) + (xy 128.35 115.75) + (xy 127.55 115.75) + (xy 127.55 115.65) + (xy 127.35 115.65) + (xy 127.35 115.55) + (xy 127.15 115.55) + (xy 127.15 115.45) + (xy 127.05 115.45) + (xy 127.05 115.35) + (xy 126.95 115.35) + (xy 126.95 115.15) + (xy 126.85 115.15) + (xy 126.85 115.05) + (xy 126.75 115.05) + (xy 126.75 114.95) + (xy 126.65 114.95) + (xy 126.65 115.05) + (xy 126.55 115.05) + (xy 126.55 115.15) + (xy 126.45 115.15) + (xy 126.45 115.25) + (xy 126.35 115.25) + (xy 126.35 115.35) + (xy 126.25 115.35) + (xy 126.25 115.45) + (xy 126.15 115.45) + (xy 126.15 115.55) + (xy 126.05 115.55) + (xy 126.05 115.65) + (xy 125.85 115.65) + (xy 125.85 115.75) + (xy 124.95 115.75) + (xy 124.95 115.65) + (xy 124.75 115.65) + (xy 124.75 115.55) + (xy 124.65 115.55) + (xy 124.65 115.45) + (xy 124.55 115.45) + (xy 124.55 115.35) + (xy 124.45 115.35) + (xy 124.45 115.25) + (xy 124.35 115.25) + (xy 124.35 115.15) + (xy 124.25 115.15) + (xy 124.25 115.05) + (xy 124.15 115.05) + (xy 124.15 114.95) + (xy 124.05 114.95) + (xy 124.05 115.05) + (xy 123.95 115.05) + (xy 123.95 115.15) + (xy 123.85 115.15) + (xy 123.85 115.35) + (xy 123.75 115.35) + (xy 123.75 115.45) + (xy 123.65 115.45) + (xy 123.65 115.55) + (xy 123.45 115.55) + (xy 123.45 115.65) + (xy 123.25 115.65) + (xy 123.25 115.75) + (xy 122.45 115.75) + (xy 122.45 115.65) + (xy 122.25 115.65) + (xy 122.25 115.55) + (xy 122.05 115.55) + (xy 122.05 115.45) + (xy 121.95 115.45) + (xy 121.95 115.25) + (xy 121.85 115.25) + (xy 121.85 115.15) + (xy 121.75 115.15) + (xy 121.75 115.05) + (xy 121.65 115.05) + (xy 121.65 114.95) + (xy 121.55 114.95) + (xy 121.55 115.05) + (xy 121.45 115.05) + (xy 121.45 115.15) + (xy 121.35 115.15) + (xy 121.35 115.25) + (xy 121.25 115.25) + (xy 121.25 115.35) + (xy 121.15 115.35) + (xy 121.15 115.45) + (xy 121.05 115.45) + (xy 121.05 115.55) + (xy 120.95 115.55) + (xy 120.95 115.65) + (xy 120.75 115.65) + (xy 120.75 115.75) + (xy 119.85 115.75) + (xy 119.85 115.65) + (xy 119.65 115.65) + (xy 119.65 115.55) + (xy 119.55 115.55) + (xy 119.55 115.45) + (xy 119.45 115.45) + (xy 119.45 115.35) + (xy 119.35 115.35) + (xy 119.35 115.15) + (xy 119.25 115.15) + (xy 119.25 114.95) + (xy 119.15 114.95) + (xy 119.15 114.25) + (xy 119.25 114.25) + (xy 119.25 114.05) + (xy 119.35 114.05) + (xy 119.35 113.85) + (xy 119.45 113.85) + (xy 119.45 113.75) + (xy 119.55 113.75) + (xy 119.55 113.65) + (xy 119.65 113.65) + (xy 119.65 113.55) + (xy 119.85 113.55) + (xy 119.85 113.45) + (xy 120.75 113.45) + (xy 120.75 113.55) + (xy 120.95 113.55) + (xy 120.95 113.65) + (xy 121.05 113.65) + (xy 121.05 113.75) + (xy 121.15 113.75) + (xy 121.15 113.85) + (xy 121.25 113.85) + (xy 121.25 113.95) + (xy 121.35 113.95) + (xy 121.35 114.05) + (xy 121.45 114.05) + (xy 121.45 114.15) + (xy 121.55 114.15) + (xy 121.55 114.25) + (xy 121.65 114.25) + (xy 121.65 114.15) + (xy 121.75 114.15) + (xy 121.75 114.05) + (xy 121.85 114.05) + (xy 121.85 113.95) + (xy 121.95 113.95) + (xy 121.95 113.75) + (xy 122.05 113.75) + (xy 122.05 113.65) + (xy 122.25 113.65) + (xy 122.25 113.55) + (xy 122.45 113.55) + (xy 122.45 113.45) + (xy 123.25 113.45) + (xy 123.25 113.55) + (xy 123.45 113.55) + (xy 123.45 113.65) + (xy 123.65 113.65) + (xy 123.65 113.75) + (xy 123.75 113.75) + (xy 123.75 113.85) + (xy 123.85 113.85) + (xy 123.85 114.05) + (xy 123.95 114.05) + (xy 123.95 114.15) + (xy 124.05 114.15) + (xy 124.05 114.25) + (xy 124.15 114.25) + (xy 124.15 114.15) + (xy 124.25 114.15) + (xy 124.25 114.05) + (xy 124.35 114.05) + (xy 124.35 113.95) + (xy 124.45 113.95) + (xy 124.45 113.85) + (xy 124.55 113.85) + (xy 124.55 113.75) + (xy 124.65 113.75) + (xy 124.65 113.65) + (xy 124.75 113.65) + (xy 124.75 113.55) + (xy 124.95 113.55) + (xy 124.95 113.45) + (xy 125.85 113.45) + (xy 125.85 113.55) + (xy 126.05 113.55) + (xy 126.05 113.65) + (xy 126.15 113.65) + (xy 126.15 113.75) + (xy 126.25 113.75) + (xy 126.25 113.85) + (xy 126.35 113.85) + (xy 126.35 113.95) + (xy 126.45 113.95) + (xy 126.45 114.05) + (xy 126.55 114.05) + (xy 126.55 114.15) + (xy 126.65 114.15) + (xy 126.65 114.25) + (xy 126.75 114.25) + (xy 126.75 114.15) + (xy 126.85 114.15) + (xy 126.85 114.05) + (xy 126.95 114.05) + (xy 126.95 113.85) + (xy 127.05 113.85) + (xy 127.05 113.75) + (xy 127.15 113.75) + (xy 127.15 113.65) + (xy 127.35 113.65) + (xy 127.35 113.55) + (xy 127.55 113.55) + (xy 127.55 113.45) + (xy 128.35 113.45) + (xy 128.35 113.55) + (xy 128.55 113.55) + (xy 128.55 113.65) + (xy 128.75 113.65) + (xy 128.75 113.75) + (xy 128.85 113.75) + (xy 128.85 113.95) + (xy 128.95 113.95) + (xy 128.95 114.05) + (xy 129.05 114.05) + (xy 129.05 114.15) + (xy 129.15 114.15) + (xy 129.15 114.25) + (xy 129.25 114.25) + (xy 129.25 114.15) + (xy 129.35 114.15) + (xy 129.35 114.05) + (xy 129.45 114.05) + (xy 129.45 113.95) + (xy 129.55 113.95) + (xy 129.55 113.85) + (xy 129.65 113.85) + (xy 129.65 113.75) + (xy 129.75 113.75) + (xy 129.75 113.65) + (xy 129.85 113.65) + (xy 129.85 113.55) + (xy 130.05 113.55) + (xy 130.05 113.45) + (xy 130.95 113.45) + (xy 130.95 113.55) + (xy 131.15 113.55) + (xy 131.15 113.65) + (xy 131.25 113.65) + (xy 131.25 113.75) + (xy 131.35 113.75) + (xy 131.35 113.85) + (xy 131.45 113.85) + (xy 131.45 114.05) + (xy 131.55 114.05) + (xy 131.55 114.15) + (xy 131.65 114.15) + (xy 131.65 114.25) + (xy 131.85 114.25) + (xy 131.85 114.15) + (xy 131.95 114.15) + (xy 131.95 114.05) + (xy 132.05 114.05) + (xy 132.05 113.85) + (xy 132.15 113.85) + (xy 132.15 113.75) + (xy 132.25 113.75) + (xy 132.25 113.65) + (xy 132.35 113.65) + (xy 132.35 113.55) + (xy 132.45 113.55) + (xy 132.45 113.45) + (xy 132.55 113.45) + (xy 132.55 113.35) + (xy 132.45 113.35) + (xy 132.45 113.25) + (xy 132.35 113.25) + (xy 132.35 113.15) + (xy 132.25 113.15) + (xy 132.25 113.05) + (xy 132.15 113.05) + (xy 132.15 112.95) + (xy 132.05 112.95) + (xy 132.05 112.85) + (xy 131.95 112.85) + (xy 131.95 112.15) + (xy 132.05 112.15) + (xy 132.05 112.05) + (xy 132.15 112.05) + (xy 132.15 111.95) + (xy 132.25 111.95) + (xy 132.25 111.85) + (xy 132.95 111.85) + (xy 132.95 111.95) + (xy 133.05 111.95) + (xy 133.05 112.05) + (xy 140.25 112.05) + (xy 140.25 111.95) + (xy 140.35 111.95) + (xy 140.35 111.85) + (xy 141.05 111.85) + (xy 141.05 111.95) + (xy 141.15 111.95) + (xy 141.15 112.05) + (xy 141.25 112.05) + (xy 141.25 112.15) + (xy 141.35 112.15) + (xy 141.35 112.55) + (xy 141.45 112.55) + (xy 141.45 112.65) + (xy 141.55 112.65) + (xy 141.55 112.75) + (xy 142.25 112.75) + (xy 142.25 112.85) + (xy 142.45 112.85) + (xy 142.45 112.95) + (xy 142.55 112.95) + (xy 142.55 113.05) + (xy 142.65 113.05) + (xy 142.65 113.15) + (xy 142.75 113.15) + (xy 142.75 113.25) + (xy 142.85 113.25) + (xy 142.85 113.35) + (xy 142.95 113.35) + (xy 142.95 113.45) + (xy 143.05 113.45) + (xy 143.05 113.55) + (xy 143.15 113.55) + (xy 143.15 113.65) + (xy 143.25 113.65) + (xy 143.25 113.55) + (xy 143.45 113.55) + (xy 143.45 113.45) + (xy 144.25 113.45) + (xy 144.25 113.55) + (xy 144.45 113.55) + (xy 144.45 113.65) + (xy 144.65 113.65) + (xy 144.65 113.75) + (xy 144.75 113.75) + (xy 144.75 113.85) + (xy 144.85 113.85) + (xy 144.85 114.05) + (xy 144.95 114.05) + (xy 144.95 114.15) + (xy 145.05 114.15) + (xy 145.05 114.25) + (xy 145.15 114.25) + (xy 145.15 114.15) + (xy 145.25 114.15) + (xy 145.25 114.05) + (xy 145.35 114.05) + (xy 145.35 113.95) + (xy 145.45 113.95) + (xy 145.45 113.85) + (xy 145.55 113.85) + (xy 145.55 113.75) + (xy 145.65 113.75) + (xy 145.65 113.65) + (xy 145.75 113.65) + (xy 145.75 113.55) + (xy 145.95 113.55) + (xy 145.95 113.45) + (xy 146.85 113.45) + (xy 146.85 113.55) + (xy 147.05 113.55) + (xy 147.05 113.65) + (xy 147.15 113.65) + (xy 147.15 113.75) + (xy 147.25 113.75) + (xy 147.25 113.85) + (xy 147.35 113.85) + (xy 147.35 113.95) + (xy 147.45 113.95) + (xy 147.45 114.05) + (xy 147.55 114.05) + (xy 147.55 114.15) + (xy 147.65 114.15) + (xy 147.65 114.25) + (xy 147.75 114.25) + (xy 147.75 114.15) + (xy 147.85 114.15) + (xy 147.85 114.05) + (xy 147.95 114.05) + (xy 147.95 113.85) + (xy 148.05 113.85) + (xy 148.05 113.75) + (xy 148.15 113.75) + (xy 148.15 113.65) + (xy 148.35 113.65) + (xy 148.35 113.55) + (xy 148.55 113.55) + (xy 148.55 113.45) + (xy 149.35 113.45) + (xy 149.35 113.55) + (xy 149.55 113.55) + (xy 149.55 113.65) + (xy 149.75 113.65) + (xy 149.75 113.75) + (xy 149.85 113.75) + (xy 149.85 113.95) + (xy 149.95 113.95) + (xy 149.95 114.05) + (xy 150.05 114.05) + (xy 150.05 114.15) + (xy 150.15 114.15) + (xy 150.15 114.25) + (xy 150.25 114.25) + (xy 150.25 114.15) + (xy 150.35 114.15) + (xy 150.35 114.05) + (xy 150.45 114.05) + (xy 150.45 113.95) + (xy 150.55 113.95) + (xy 150.55 113.85) + (xy 150.65 113.85) + (xy 150.65 113.75) + (xy 150.75 113.75) + (xy 150.75 113.65) + (xy 150.85 113.65) + (xy 150.85 113.55) + (xy 151.05 113.55) + (xy 151.05 113.45) + (xy 151.95 113.45) + (xy 151.95 113.55) + (xy 152.15 113.55) + (xy 152.15 113.65) + (xy 152.25 113.65) + (xy 152.25 113.75) + (xy 152.35 113.75) + (xy 152.35 113.85) + (xy 152.45 113.85) + (xy 152.45 114.05) + (xy 152.55 114.05) + (xy 152.55 114.15) + (xy 152.65 114.15) + (xy 152.65 114.25) + (xy 152.85 114.25) + (xy 152.85 114.15) + (xy 152.95 114.15) + (xy 152.95 114.05) + (xy 153.05 114.05) + (xy 153.05 113.85) + (xy 153.15 113.85) + (xy 153.15 113.75) + (xy 153.25 113.75) + (xy 153.25 113.65) + (xy 153.35 113.65) + (xy 153.35 113.55) + (xy 153.55 113.55) + (xy 153.55 113.45) + (xy 154.05 113.45) + (xy 154.05 113.35) + (xy 154.15 113.35) + (xy 154.15 113.25) + (xy 154.25 113.25) + (xy 154.25 113.15) + (xy 154.35 113.15) + (xy 154.35 113.05) + (xy 154.45 113.05) + (xy 154.45 112.95) + (xy 154.55 112.95) + (xy 154.55 112.85) + (xy 154.65 112.85) + (xy 154.65 112.75) + (xy 154.75 112.75) + (xy 154.75 112.65) + (xy 154.85 112.65) + (xy 154.85 112.55) + (xy 154.95 112.55) + (xy 154.95 112.45) + (xy 155.05 112.45) + (xy 155.05 112.35) + (xy 155.15 112.35) + (xy 155.15 112.25) + (xy 155.25 112.25) + (xy 155.25 112.15) + (xy 155.35 112.15) + (xy 155.35 112.05) + (xy 155.45 112.05) + (xy 155.45 111.95) + (xy 155.55 111.95) + (xy 155.55 111.85) + (xy 155.65 111.85) + (xy 155.65 111.75) + (xy 155.75 111.75) + (xy 155.75 111.65) + (xy 155.85 111.65) + (xy 155.85 111.55) + (xy 155.95 111.55) + (xy 155.95 111.45) + (xy 156.05 111.45) + (xy 156.05 111.35) + (xy 156.15 111.35) + (xy 156.15 111.25) + (xy 156.25 111.25) + (xy 156.25 111.15) + (xy 156.35 111.15) + (xy 156.35 111.05) + (xy 156.45 111.05) + (xy 156.45 110.95) + (xy 156.55 110.95) + (xy 156.55 110.85) + (xy 156.65 110.85) + (xy 156.65 110.75) + (xy 156.75 110.75) + (xy 156.75 110.65) + (xy 156.85 110.65) + (xy 156.85 107.25) + (xy 117.25 107.25) + (xy 117.25 107.85) + (xy 117.15 107.85) + (xy 117.15 108.25) + (xy 117.05 108.25) + (xy 117.05 108.45) + (xy 116.95 108.45) + (xy 116.95 108.65) + (xy 116.85 108.65) + (xy 116.85 108.75) + (xy 116.75 108.75) + (xy 116.75 108.85) + (xy 116.65 108.85) + (xy 116.65 108.95) + (xy 116.55 108.95) + (xy 116.55 109.05) + (xy 116.45 109.05) + (xy 116.45 109.15) + (xy 116.35 109.15) + (xy 116.35 109.25) + (xy 116.15 109.25) + (xy 116.15 109.35) + (xy 115.95 109.35) + (xy 115.95 109.45) + (xy 115.55 109.45) + (xy 115.55 109.55) + (xy 114.95 109.55) + (xy 114.95 109.45) + (xy 114.55 109.45) + (xy 114.55 109.35) + (xy 114.35 109.35) + (xy 114.35 109.25) + (xy 114.15 109.25) + (xy 114.15 109.15) + (xy 114.05 109.15) + (xy 114.05 109.05) + (xy 113.95 109.05) + (xy 113.95 108.95) + (xy 113.85 108.95) + (xy 113.85 108.85) + (xy 113.75 108.85) + (xy 113.75 108.75) + (xy 113.65 108.75) + (xy 113.65 108.65) + (xy 113.55 108.65) + (xy 113.55 108.45) + (xy 113.45 108.45) + (xy 113.45 108.25) + (xy 113.35 108.25) + (xy 113.35 107.95) + (xy 113.25 107.95) + (xy 113.25 107.15) + (xy 113.35 107.15) + (xy 113.35 106.85) + (xy 113.45 106.85) + (xy 113.45 106.55) + (xy 113.55 106.55) + (xy 113.55 106.45) + (xy 113.65 106.45) + (xy 113.65 106.25) + (xy 113.75 106.25) + (xy 113.75 106.15) + (xy 113.85 106.15) + (xy 113.85 106.05) + (xy 113.95 106.05) + (xy 113.95 105.95) + (xy 114.15 105.95) + (xy 114.15 105.85) + (xy 114.25 105.85) + (xy 114.25 105.75) + (xy 114.55 105.75) + (xy 114.55 105.65) + (xy 114.85 105.65) + (xy 114.85 105.55) + (xy 115.65 105.55) + (xy 115.65 105.65) + (xy 115.95 105.65) + (xy 115.95 105.75) + (xy 116.15 105.75) + (xy 116.15 105.85) + (xy 116.35 105.85) + (xy 116.35 105.95) + (xy 116.45 105.95) + (xy 116.45 106.05) + (xy 116.55 106.05) + (xy 116.55 106.15) + (xy 116.65 106.15) + (xy 116.65 106.25) + (xy 116.75 106.25) + (xy 116.75 106.35) + (xy 116.85 106.35) + (xy 116.85 106.45) + (xy 116.95 106.45) + (xy 116.95 106.65) + (xy 117.05 106.65) + (xy 117.05 106.85) + (xy 117.15 106.85) + (xy 117.15 107.25) + (xy 117.25 107.25) + (xy 156.85 107.25) + (xy 156.85 105.05) + (xy 156.75 105.05) + (xy 156.75 104.95) + (xy 156.65 104.95) + (xy 156.65 104.85) + (xy 156.25 104.85) + (xy 156.25 104.75) + (xy 156.15 104.75) + (xy 156.15 104.65) + (xy 156.05 104.65) + (xy 156.05 104.55) + (xy 155.95 104.55) + (xy 155.95 104.35) + (xy 155.85 104.35) + (xy 155.85 104.25) + (xy 155.75 104.25) + (xy 155.75 104.15) + (xy 155.65 104.15) + (xy 155.65 104.05) + (xy 155.55 104.05) + (xy 155.55 103.95) + (xy 155.45 103.95) + (xy 155.45 103.85) + (xy 155.35 103.85) + (xy 155.35 103.75) + (xy 155.25 103.75) + (xy 155.25 103.65) + (xy 155.15 103.65) + (xy 155.15 103.55) + (xy 155.05 103.55) + (xy 155.05 103.45) + (xy 154.95 103.45) + (xy 154.95 103.35) + (xy 154.85 103.35) + (xy 154.85 103.25) + (xy 154.75 103.25) + (xy 154.75 103.15) + (xy 154.65 103.15) + (xy 154.65 103.05) + (xy 154.55 103.05) + (xy 154.55 102.95) + (xy 154.45 102.95) + (xy 154.45 103.05) + (xy 153.55 103.05) + (xy 153.55 102.95) + (xy 153.35 102.95) + (xy 153.35 102.85) + (xy 153.25 102.85) + (xy 153.25 102.75) + (xy 153.15 102.75) + (xy 153.15 102.65) + (xy 153.05 102.65) + (xy 153.05 102.45) + (xy 152.95 102.45) + (xy 152.95 102.35) + (xy 152.85 102.35) + (xy 152.85 102.25) + (xy 152.65 102.25) + (xy 152.65 102.35) + (xy 152.55 102.35) + (xy 152.55 102.45) + (xy 152.45 102.45) + (xy 152.45 102.65) + (xy 152.35 102.65) + (xy 152.35 102.75) + (xy 152.25 102.75) + (xy 152.25 102.85) + (xy 152.15 102.85) + (xy 152.15 102.95) + (xy 151.95 102.95) + (xy 151.95 103.05) + (xy 151.05 103.05) + (xy 151.05 102.95) + (xy 150.85 102.95) + (xy 150.85 102.85) + (xy 150.75 102.85) + (xy 150.75 102.75) + (xy 150.65 102.75) + (xy 150.65 102.65) + (xy 150.55 102.65) + (xy 150.55 102.55) + (xy 150.45 102.55) + (xy 150.45 102.45) + (xy 150.35 102.45) + (xy 150.35 102.35) + (xy 150.25 102.35) + (xy 150.25 102.25) + (xy 150.15 102.25) + (xy 150.15 102.35) + (xy 150.05 102.35) + (xy 150.05 102.45) + (xy 149.95 102.45) + (xy 149.95 102.55) + (xy 149.85 102.55) + (xy 149.85 102.75) + (xy 149.75 102.75) + (xy 149.75 102.85) + (xy 149.55 102.85) + (xy 149.55 102.95) + (xy 149.35 102.95) + (xy 149.35 103.05) + (xy 148.55 103.05) + (xy 148.55 102.95) + (xy 148.35 102.95) + (xy 148.35 102.85) + (xy 148.15 102.85) + (xy 148.15 102.75) + (xy 148.05 102.75) + (xy 148.05 102.65) + (xy 147.95 102.65) + (xy 147.95 102.45) + (xy 147.85 102.45) + (xy 147.85 102.35) + (xy 147.75 102.35) + (xy 147.75 102.25) + (xy 147.65 102.25) + (xy 147.65 102.35) + (xy 147.55 102.35) + (xy 147.55 102.45) + (xy 147.45 102.45) + (xy 147.45 102.55) + (xy 147.35 102.55) + (xy 147.35 102.65) + (xy 147.25 102.65) + (xy 147.25 102.75) + (xy 147.15 102.75) + (xy 147.15 102.85) + (xy 147.05 102.85) + (xy 147.05 102.95) + (xy 146.85 102.95) + (xy 146.85 103.05) + (xy 145.95 103.05) + (xy 145.95 102.95) + (xy 145.75 102.95) + (xy 145.75 102.85) + (xy 145.65 102.85) + (xy 145.65 102.75) + (xy 145.55 102.75) + (xy 145.55 102.65) + (xy 145.45 102.65) + (xy 145.45 102.55) + (xy 145.35 102.55) + (xy 145.35 102.35) + (xy 145.25 102.35) + (xy 145.25 101.45) + (xy 145.35 101.45) + (xy 145.35 101.25) + (xy 145.45 101.25) + (xy 145.45 101.15) + (xy 145.55 101.15) + (xy 145.55 101.05) + (xy 145.65 101.05) + (xy 145.65 100.95) + (xy 145.75 100.95) + (xy 145.75 100.85) + (xy 145.85 100.85) + (xy 145.85 100.75) + (xy 145.75 100.75) + (xy 145.75 100.65) + (xy 145.65 100.65) + (xy 145.65 100.55) + (xy 142.05 100.55) + (xy 142.05 100.65) + (xy 141.95 100.65) + (xy 141.95 100.75) + (xy 141.85 100.75) + (xy 141.85 100.85) + (xy 141.95 100.85) + (xy 141.95 100.95) + (xy 142.05 100.95) + (xy 142.05 101.05) + (xy 142.15 101.05) + (xy 142.15 101.15) + (xy 142.25 101.15) + (xy 142.25 101.25) + (xy 142.35 101.25) + (xy 142.35 101.45) + (xy 142.45 101.45) + (xy 142.45 101.85) + (xy 142.55 101.85) + (xy 142.55 101.95) + (xy 142.45 101.95) + (xy 142.45 102.35) + (xy 142.35 102.35) + (xy 142.35 102.55) + (xy 142.25 102.55) + (xy 142.25 102.65) + (xy 142.15 102.65) + (xy 142.15 102.75) + (xy 142.05 102.75) + (xy 142.05 102.85) + (xy 141.95 102.85) + (xy 141.95 102.95) + (xy 141.75 102.95) + (xy 141.75 103.05) + (xy 140.85 103.05) + (xy 140.85 102.95) + (xy 140.65 102.95) + (xy 140.65 102.85) + (xy 140.55 102.85) + (xy 140.55 102.75) + (xy 140.45 102.75) + (xy 140.45 102.65) + (xy 140.35 102.65) + (xy 140.35 102.45) + (xy 140.25 102.45) + (xy 140.25 102.25) + (xy 140.15 102.25) + (xy 140.15 101.55) + (xy 140.25 101.55) + (xy 140.25 101.35) + (xy 140.35 101.35) + (xy 140.35 101.15) + (xy 140.45 101.15) + (xy 140.45 101.05) + (xy 140.55 101.05) + (xy 140.55 100.95) + (xy 140.65 100.95) + (xy 140.65 100.85) + (xy 140.75 100.85) + (xy 140.75 100.75) + (xy 140.65 100.75) + (xy 140.65 100.65) + (xy 140.55 100.65) + (xy 140.55 100.55) + (xy 136.35 100.55) + (xy 136.35 100.65) + (xy 136.25 100.65) + (xy 136.25 100.75) + (xy 136.15 100.75) + (xy 136.15 100.85) + (xy 136.25 100.85) + (xy 136.25 100.95) + (xy 136.35 100.95) + (xy 136.35 101.05) + (xy 136.45 101.05) + (xy 136.45 101.15) + (xy 136.55 101.15) + (xy 136.55 101.35) + (xy 136.65 101.35) + (xy 136.65 101.55) + (xy 136.75 101.55) + (xy 136.75 102.25) + (xy 136.65 102.25) + (xy 136.65 102.45) + (xy 136.55 102.45) + (xy 136.55 102.65) + (xy 136.45 102.65) + (xy 136.45 102.75) + (xy 136.35 102.75) + (xy 136.35 102.85) + (xy 136.15 102.85) + (xy 136.15 102.95) + (xy 135.95 102.95) + (xy 135.95 103.05) + (xy 135.15 103.05) + (xy 135.15 102.95) + (xy 134.95 102.95) + (xy 134.95 102.85) + (xy 134.75 102.85) + (xy 134.75 102.75) + (xy 134.65 102.75) + (xy 134.65 102.55) + (xy 134.55 102.55) + (xy 134.55 102.45) + (xy 134.45 102.45) + (xy 134.45 102.35) + (xy 134.35 102.35) + (xy 134.35 102.25) + (xy 134.25 102.25) + (xy 134.25 102.35) + (xy 134.15 102.35) + (xy 134.15 102.45) + (xy 134.05 102.45) + (xy 134.05 102.55) + (xy 133.95 102.55) + (xy 133.95 102.65) + (xy 133.85 102.65) + (xy 133.85 102.75) + (xy 133.75 102.75) + (xy 133.75 102.85) + (xy 133.65 102.85) + (xy 133.65 102.95) + (xy 133.45 102.95) + (xy 133.45 103.05) + (xy 132.55 103.05) + (xy 132.55 102.95) + (xy 132.35 102.95) + (xy 132.35 102.85) + (xy 132.25 102.85) + (xy 132.25 102.75) + (xy 132.15 102.75) + (xy 132.15 102.65) + (xy 132.05 102.65) + (xy 132.05 102.45) + (xy 131.95 102.45) + (xy 131.95 102.35) + (xy 131.85 102.35) + (xy 131.85 102.25) + (xy 131.65 102.25) + (xy 131.65 102.35) + (xy 131.55 102.35) + (xy 131.55 102.45) + (xy 131.45 102.45) + (xy 131.45 102.65) + (xy 131.35 102.65) + (xy 131.35 102.75) + (xy 131.25 102.75) + (xy 131.25 102.85) + (xy 131.15 102.85) + (xy 131.15 102.95) + (xy 130.95 102.95) + (xy 130.95 103.05) + (xy 130.05 103.05) + (xy 130.05 102.95) + (xy 129.85 102.95) + (xy 129.85 102.85) + (xy 129.75 102.85) + (xy 129.75 102.75) + (xy 129.65 102.75) + (xy 129.65 102.65) + (xy 129.55 102.65) + (xy 129.55 102.55) + (xy 129.45 102.55) + (xy 129.45 102.45) + (xy 129.35 102.45) + (xy 129.35 102.35) + (xy 129.25 102.35) + (xy 129.25 102.25) + (xy 129.15 102.25) + (xy 129.15 102.35) + (xy 129.05 102.35) + (xy 129.05 102.45) + (xy 128.95 102.45) + (xy 128.95 102.55) + (xy 128.85 102.55) + (xy 128.85 102.75) + (xy 128.75 102.75) + (xy 128.75 102.85) + (xy 128.55 102.85) + (xy 128.55 102.95) + (xy 128.35 102.95) + (xy 128.35 103.05) + (xy 127.55 103.05) + (xy 127.55 102.95) + (xy 127.25 102.95) + (xy 127.25 103.05) + (xy 127.15 103.05) + (xy 127.15 103.15) + (xy 127.05 103.15) + (xy 127.05 103.25) + (xy 126.95 103.25) + (xy 126.95 103.35) + (xy 126.85 103.35) + (xy 126.85 103.45) + (xy 126.75 103.45) + (xy 126.75 103.55) + (xy 126.65 103.55) + (xy 126.65 103.65) + (xy 126.55 103.65) + (xy 126.55 103.75) + (xy 126.45 103.75) + (xy 126.45 103.85) + (xy 126.35 103.85) + (xy 126.35 103.95) + (xy 126.25 103.95) + (xy 126.25 104.05) + (xy 126.15 104.05) + (xy 126.15 104.15) + (xy 126.05 104.15) + (xy 126.05 104.25) + (xy 125.95 104.25) + (xy 125.95 104.35) + (xy 125.85 104.35) + (xy 125.85 104.45) + (xy 125.75 104.45) + (xy 125.75 104.55) + (xy 125.65 104.55) + (xy 125.65 104.65) + (xy 125.55 104.65) + (xy 125.55 104.75) + (xy 125.35 104.75) + (xy 125.35 104.85) + (xy 120.65 104.85) + (xy 120.65 104.95) + (xy 120.55 104.95) + (xy 120.55 105.05) + (xy 120.45 105.05) + (xy 120.45 105.75) + (xy 120.35 105.75) + (xy 120.35 105.85) + (xy 120.25 105.85) + (xy 120.25 105.95) + (xy 120.15 105.95) + (xy 120.15 106.05) + (xy 117.45 106.05) + (xy 117.45 105.95) + (xy 117.35 105.95) + (xy 117.35 105.85) + (xy 117.25 105.85) + (xy 117.25 105.75) + (xy 117.15 105.75) + (xy 117.15 105.05) + (xy 117.05 105.05) + (xy 117.05 104.95) + (xy 116.95 104.95) + (xy 116.95 104.85) + (xy 109.45 104.85) + (xy 109.45 104.95) + (xy 109.35 104.95) + (xy 109.35 105.05) + (xy 109.25 105.05) + (xy 109.25 105.15) + (xy 109.15 105.15) + (xy 109.15 105.25) + (xy 109.05 105.25) + (xy 109.05 105.35) + (xy 108.95 105.35) + (xy 108.95 105.45) + (xy 108.85 105.45) + (xy 108.85 105.55) + (xy 108.75 105.55) + (xy 108.75 105.65) + (xy 108.65 105.65) + (xy 108.65 105.75) + (xy 108.55 105.75) + (xy 108.55 105.85) + (xy 108.45 105.85) + (xy 108.45 105.95) + (xy 108.35 105.95) + (xy 108.35 106.05) + (xy 108.25 106.05) + (xy 108.25 106.15) + (xy 108.15 106.15) + (xy 108.15 106.25) + (xy 108.05 106.25) + (xy 108.05 106.35) + (xy 107.95 106.35) + (xy 107.95 106.45) + (xy 107.85 106.45) + (xy 107.85 106.55) + (xy 107.75 106.55) + (xy 107.75 106.65) + (xy 107.65 106.65) + (xy 107.65 106.75) + (xy 107.55 106.75) + (xy 107.55 106.85) + (xy 107.45 106.85) + (xy 107.45 106.95) + (xy 107.35 106.95) + (xy 107.35 107.05) + (xy 107.25 107.05) + (xy 107.25 107.15) + (xy 107.15 107.15) + (xy 107.15 107.25) + (xy 107.05 107.25) + (xy 107.05 107.35) + (xy 106.95 107.35) + (xy 106.95 107.45) + (xy 106.85 107.45) + (xy 106.85 107.55) + (xy 106.75 107.55) + (xy 106.75 107.65) + (xy 106.65 107.65) + (xy 106.65 107.75) + (xy 106.55 107.75) + (xy 106.55 107.85) + (xy 106.45 107.85) + (xy 106.45 107.95) + (xy 106.35 107.95) + (xy 106.35 108.05) + (xy 106.25 108.05) + (xy 106.25 108.15) + (xy 106.15 108.15) + (xy 106.15 108.25) + (xy 106.05 108.25) + (xy 106.05 108.35) + (xy 105.95 108.35) + (xy 105.95 108.45) + (xy 105.85 108.45) + (xy 105.85 108.75) + (xy 105.75 108.75) + (xy 105.75 108.95) + (xy 105.65 108.95) + (xy 105.65 109.15) + (xy 105.55 109.15) + (xy 105.55 109.25) + (xy 105.45 109.25) + (xy 105.45 109.35) + (xy 105.35 109.35) + (xy 105.35 109.45) + (xy 105.25 109.45) + (xy 105.25 109.55) + (xy 105.15 109.55) + (xy 105.15 109.75) + (xy 105.25 109.75) + (xy 105.25 109.85) + (xy 105.35 109.85) + (xy 105.35 109.95) + (xy 105.45 109.95) + (xy 105.45 110.05) + (xy 105.55 110.05) + (xy 105.55 110.15) + (xy 105.65 110.15) + (xy 105.65 110.35) + (xy 105.75 110.35) + (xy 105.75 110.55) + (xy 105.85 110.55) + (xy 105.85 111.25) + (xy 105.75 111.25) + (xy 105.75 111.45) + (xy 105.65 111.45) + (xy 105.65 111.65) + (xy 105.55 111.65) + (xy 105.55 111.75) + (xy 105.45 111.75) + (xy 105.45 111.85) + (xy 105.35 111.85) + (xy 105.35 111.95) + (xy 105.15 111.95) + (xy 105.15 112.05) + (xy 104.85 112.05) + (xy 104.85 112.15) + (xy 104.15 112.15) + (xy 104.15 112.05) + (xy 103.85 112.05) + (xy 103.85 111.95) + (xy 103.65 111.95) + (xy 103.65 111.85) + (xy 103.55 111.85) + (xy 103.55 111.75) + (xy 103.45 111.75) + (xy 103.45 111.65) + (xy 103.35 111.65) + (xy 103.35 111.45) + (xy 103.25 111.45) + (xy 103.25 111.25) + (xy 103.15 111.25) + (xy 103.15 110.55) + (xy 103.25 110.55) + (xy 103.25 110.35) + (xy 103.35 110.35) + (xy 103.35 110.15) + (xy 103.45 110.15) + (xy 103.45 110.05) + (xy 103.55 110.05) + (xy 103.55 109.95) + (xy 103.65 109.95) + (xy 103.65 109.85) + (xy 103.75 109.85) + (xy 103.75 109.75) + (xy 103.85 109.75) + (xy 103.85 109.55) + (xy 103.75 109.55) + (xy 103.75 109.45) + (xy 103.65 109.45) + (xy 103.65 109.35) + (xy 103.55 109.35) + (xy 103.55 109.25) + (xy 103.45 109.25) + (xy 103.45 109.15) + (xy 103.35 109.15) + (xy 103.35 108.95) + (xy 103.25 108.95) + (xy 103.25 108.75) + (xy 103.15 108.75) + (xy 103.15 108.05) + (xy 103.25 108.05) + (xy 103.25 107.85) + (xy 103.35 107.85) + (xy 103.35 107.65) + (xy 103.45 107.65) + (xy 103.45 107.55) + (xy 103.55 107.55) + (xy 103.55 107.45) + (xy 103.65 107.45) + (xy 103.65 107.35) + (xy 103.75 107.35) + (xy 103.75 107.25) + (xy 103.85 107.25) + (xy 103.85 107.05) + (xy 103.75 107.05) + (xy 103.75 106.95) + (xy 103.65 106.95) + (xy 103.65 106.85) + (xy 103.55 106.85) + (xy 103.55 106.75) + (xy 103.45 106.75) + (xy 103.45 106.65) + (xy 103.35 106.65) + (xy 103.35 106.45) + (xy 103.25 106.45) + (xy 103.25 106.25) + (xy 103.15 106.25) + (xy 103.15 105.55) + (xy 103.25 105.55) + (xy 103.25 105.35) + (xy 103.35 105.35) + (xy 103.35 105.15) + (xy 103.45 105.15) + (xy 103.45 105.05) + (xy 103.55 105.05) + (xy 103.55 104.95) + (xy 103.65 104.95) + (xy 103.65 104.85) + (xy 103.55 104.85) + (xy 103.55 104.75) + (xy 103.45 104.75) + (xy 103.45 104.65) + (xy 103.35 104.65) + (xy 103.35 104.55) + (xy 103.25 104.55) + (xy 103.25 104.45) + (xy 103.15 104.45) + (xy 103.15 102.35) + (xy 103.25 102.35) + (xy 103.25 102.25) + (xy 103.35 102.25) + (xy 103.35 102.15) + (xy 105.65 102.15) + (xy 105.65 102.25) + (xy 105.75 102.25) + (xy 105.75 102.35) + (xy 105.85 102.35) + (xy 105.85 104.45) + (xy 105.75 104.45) + (xy 105.75 104.55) + (xy 105.65 104.55) + (xy 105.65 104.65) + (xy 105.55 104.65) + (xy 105.55 104.75) + (xy 105.45 104.75) + (xy 105.45 104.85) + (xy 105.35 104.85) + (xy 105.35 104.95) + (xy 105.45 104.95) + (xy 105.45 105.05) + (xy 105.55 105.05) + (xy 105.55 105.15) + (xy 105.65 105.15) + (xy 105.65 105.35) + (xy 105.75 105.35) + (xy 105.75 105.45) + (xy 105.85 105.45) + (xy 105.85 105.55) + (xy 106.05 105.55) + (xy 106.05 105.45) + (xy 106.15 105.45) + (xy 106.15 105.35) + (xy 106.25 105.35) + (xy 106.25 105.25) + (xy 106.35 105.25) + (xy 106.35 105.15) + (xy 106.45 105.15) + (xy 106.45 105.05) + (xy 106.55 105.05) + (xy 106.55 104.95) + (xy 106.65 104.95) + (xy 106.65 104.85) + (xy 106.75 104.85) + (xy 106.75 104.75) + (xy 106.85 104.75) + (xy 106.85 104.65) + (xy 106.95 104.65) + (xy 106.95 104.55) + (xy 107.05 104.55) + (xy 107.05 104.45) + (xy 107.15 104.45) + (xy 107.15 104.35) + (xy 107.25 104.35) + (xy 107.25 104.25) + (xy 107.35 104.25) + (xy 107.35 104.15) + (xy 107.45 104.15) + (xy 107.45 104.05) + (xy 107.55 104.05) + (xy 107.55 103.95) + (xy 107.65 103.95) + (xy 107.65 103.85) + (xy 107.75 103.85) + (xy 107.75 103.75) + (xy 107.85 103.75) + (xy 107.85 103.65) + (xy 107.95 103.65) + (xy 107.95 103.55) + (xy 108.05 103.55) + (xy 108.05 103.45) + (xy 108.15 103.45) + (xy 108.15 103.35) + (xy 108.25 103.35) + (xy 108.25 103.25) + (xy 108.35 103.25) + (xy 108.35 103.15) + (xy 108.45 103.15) + (xy 108.45 103.05) + (xy 108.55 103.05) + (xy 108.55 102.95) + (xy 108.65 102.95) + (xy 108.65 102.85) + (xy 108.75 102.85) + (xy 108.75 102.75) + (xy 108.85 102.75) + (xy 108.85 102.65) + (xy 108.95 102.65) + (xy 108.95 102.55) + (xy 109.05 102.55) + (xy 109.05 102.45) + (xy 109.15 102.45) + (xy 109.15 102.35) + (xy 109.25 102.35) + (xy 109.25 102.05) + (xy 109.35 102.05) + (xy 109.35 101.95) + (xy 109.45 101.95) + (xy 109.45 101.85) + (xy 109.55 101.85) + (xy 109.55 101.75) + (xy 110.25 101.75) + (xy 110.25 101.85) + (xy 110.35 101.85) + (xy 110.35 101.95) + (xy 110.45 101.95) + (xy 110.45 102.05) + (xy 110.55 102.05) + (xy 110.55 102.75) + (xy 110.45 102.75) + (xy 110.45 102.85) + (xy 110.35 102.85) + (xy 110.35 102.95) + (xy 110.25 102.95) + (xy 110.25 103.05) + (xy 109.95 103.05) + (xy 109.95 103.15) + (xy 109.85 103.15) + (xy 109.85 103.25) + (xy 109.75 103.25) + (xy 109.75 103.35) + (xy 109.85 103.35) + (xy 109.85 103.45) + (xy 109.95 103.45) + (xy 109.95 103.55) + (xy 117.05 103.55) + (xy 117.05 103.45) + (xy 117.15 103.45) + (xy 117.15 103.35) + (xy 117.25 103.35) + (xy 117.25 102.95) + (xy 117.35 102.95) + (xy 117.35 102.85) + (xy 117.45 102.85) + (xy 117.45 102.75) + (xy 117.55 102.75) + (xy 117.55 102.65) + (xy 119.05 102.65) + (xy 119.05 102.55) + (xy 119.15 102.55) + (xy 119.15 102.45) + (xy 119.25 102.45) + (xy 119.25 102.25) + (xy 119.15 102.25) + (xy 119.15 101.55) + (xy 119.25 101.55) + (xy 119.25 101.35) + (xy 119.35 101.35) + (xy 119.35 101.15) + (xy 119.45 101.15) + (xy 119.45 101.05) + (xy 119.55 101.05) + (xy 119.55 100.95) + (xy 119.65 100.95) + (xy 119.65 100.85) + (xy 119.75 100.85) + (xy 119.75 100.75) + (xy 119.65 100.75) + (xy 119.65 100.65) + (xy 119.55 100.65) + (xy 119.55 100.55) + ) + ) + (filled_polygon + (layer "B.Cu") + (pts + (xy 121.05 100.55) + (xy 121.05 100.65) + (xy 120.95 100.65) + (xy 120.95 100.75) + (xy 120.85 100.75) + (xy 120.85 100.85) + (xy 120.95 100.85) + (xy 120.95 100.95) + (xy 121.05 100.95) + (xy 121.05 101.05) + (xy 121.15 101.05) + (xy 121.15 101.15) + (xy 121.25 101.15) + (xy 121.25 101.25) + (xy 121.35 101.25) + (xy 121.35 101.45) + (xy 121.45 101.45) + (xy 121.45 101.85) + (xy 121.55 101.85) + (xy 121.55 101.95) + (xy 121.45 101.95) + (xy 121.45 102.35) + (xy 121.35 102.35) + (xy 121.35 102.55) + (xy 121.25 102.55) + (xy 121.25 102.65) + (xy 121.15 102.65) + (xy 121.15 102.85) + (xy 121.25 102.85) + (xy 121.25 102.95) + (xy 121.35 102.95) + (xy 121.35 103.35) + (xy 121.45 103.35) + (xy 121.45 103.45) + (xy 121.55 103.45) + (xy 121.55 103.55) + (xy 125.05 103.55) + (xy 125.05 103.45) + (xy 125.15 103.45) + (xy 125.15 103.35) + (xy 125.25 103.35) + (xy 125.25 103.25) + (xy 125.15 103.25) + (xy 125.15 103.15) + (xy 125.05 103.15) + (xy 125.05 103.05) + (xy 124.95 103.05) + (xy 124.95 102.95) + (xy 124.75 102.95) + (xy 124.75 102.85) + (xy 124.65 102.85) + (xy 124.65 102.75) + (xy 124.55 102.75) + (xy 124.55 102.65) + (xy 124.45 102.65) + (xy 124.45 102.55) + (xy 124.35 102.55) + (xy 124.35 102.35) + (xy 124.25 102.35) + (xy 124.25 101.45) + (xy 124.35 101.45) + (xy 124.35 101.25) + (xy 124.45 101.25) + (xy 124.45 101.15) + (xy 124.55 101.15) + (xy 124.55 101.05) + (xy 124.65 101.05) + (xy 124.65 100.95) + (xy 124.75 100.95) + (xy 124.75 100.85) + (xy 124.85 100.85) + (xy 124.85 100.75) + (xy 124.75 100.75) + (xy 124.75 100.65) + (xy 124.65 100.65) + (xy 124.65 100.55) + ) + ) + (filled_polygon + (layer "B.Cu") + (pts + (xy 126.15 100.55) + (xy 126.15 100.65) + (xy 126.05 100.65) + (xy 126.05 100.75) + (xy 125.95 100.75) + (xy 125.95 100.85) + (xy 126.05 100.85) + (xy 126.05 100.95) + (xy 126.15 100.95) + (xy 126.15 101.05) + (xy 126.25 101.05) + (xy 126.25 101.15) + (xy 126.35 101.15) + (xy 126.35 101.25) + (xy 126.45 101.25) + (xy 126.45 101.35) + (xy 126.55 101.35) + (xy 126.55 101.45) + (xy 126.65 101.45) + (xy 126.65 101.55) + (xy 126.75 101.55) + (xy 126.75 101.45) + (xy 126.85 101.45) + (xy 126.85 101.35) + (xy 126.95 101.35) + (xy 126.95 101.15) + (xy 127.05 101.15) + (xy 127.05 101.05) + (xy 127.15 101.05) + (xy 127.15 100.95) + (xy 127.25 100.95) + (xy 127.25 100.85) + (xy 127.35 100.85) + (xy 127.35 100.75) + (xy 127.25 100.75) + (xy 127.25 100.65) + (xy 127.15 100.65) + (xy 127.15 100.55) + ) + ) + (filled_polygon + (layer "B.Cu") + (pts + (xy 128.75 100.55) + (xy 128.75 100.65) + (xy 128.65 100.65) + (xy 128.65 100.75) + (xy 128.55 100.75) + (xy 128.55 100.85) + (xy 128.65 100.85) + (xy 128.65 100.95) + (xy 128.75 100.95) + (xy 128.75 101.05) + (xy 128.85 101.05) + (xy 128.85 101.25) + (xy 128.95 101.25) + (xy 128.95 101.35) + (xy 129.05 101.35) + (xy 129.05 101.45) + (xy 129.15 101.45) + (xy 129.15 101.55) + (xy 129.25 101.55) + (xy 129.25 101.45) + (xy 129.35 101.45) + (xy 129.35 101.35) + (xy 129.45 101.35) + (xy 129.45 101.25) + (xy 129.55 101.25) + (xy 129.55 101.15) + (xy 129.65 101.15) + (xy 129.65 101.05) + (xy 129.75 101.05) + (xy 129.75 100.95) + (xy 129.85 100.95) + (xy 129.85 100.85) + (xy 129.95 100.85) + (xy 129.95 100.75) + (xy 129.85 100.75) + (xy 129.85 100.65) + (xy 129.75 100.65) + (xy 129.75 100.55) + ) + ) + (filled_polygon + (layer "B.Cu") + (pts + (xy 131.25 100.55) + (xy 131.25 100.65) + (xy 131.15 100.65) + (xy 131.15 100.75) + (xy 131.05 100.75) + (xy 131.05 100.85) + (xy 131.15 100.85) + (xy 131.15 100.95) + (xy 131.25 100.95) + (xy 131.25 101.05) + (xy 131.35 101.05) + (xy 131.35 101.15) + (xy 131.45 101.15) + (xy 131.45 101.35) + (xy 131.55 101.35) + (xy 131.55 101.45) + (xy 131.65 101.45) + (xy 131.65 101.55) + (xy 131.85 101.55) + (xy 131.85 101.45) + (xy 131.95 101.45) + (xy 131.95 101.35) + (xy 132.05 101.35) + (xy 132.05 101.15) + (xy 132.15 101.15) + (xy 132.15 101.05) + (xy 132.25 101.05) + (xy 132.25 100.95) + (xy 132.35 100.95) + (xy 132.35 100.85) + (xy 132.45 100.85) + (xy 132.45 100.75) + (xy 132.35 100.75) + (xy 132.35 100.65) + (xy 132.25 100.65) + (xy 132.25 100.55) + ) + ) + (filled_polygon + (layer "B.Cu") + (pts + (xy 133.75 100.55) + (xy 133.75 100.65) + (xy 133.65 100.65) + (xy 133.65 100.75) + (xy 133.55 100.75) + (xy 133.55 100.85) + (xy 133.65 100.85) + (xy 133.65 100.95) + (xy 133.75 100.95) + (xy 133.75 101.05) + (xy 133.85 101.05) + (xy 133.85 101.15) + (xy 133.95 101.15) + (xy 133.95 101.25) + (xy 134.05 101.25) + (xy 134.05 101.35) + (xy 134.15 101.35) + (xy 134.15 101.45) + (xy 134.25 101.45) + (xy 134.25 101.55) + (xy 134.35 101.55) + (xy 134.35 101.45) + (xy 134.45 101.45) + (xy 134.45 101.35) + (xy 134.55 101.35) + (xy 134.55 101.25) + (xy 134.65 101.25) + (xy 134.65 101.05) + (xy 134.75 101.05) + (xy 134.75 100.95) + (xy 134.85 100.95) + (xy 134.85 100.85) + (xy 134.95 100.85) + (xy 134.95 100.75) + (xy 134.85 100.75) + (xy 134.85 100.65) + (xy 134.75 100.65) + (xy 134.75 100.55) + ) + ) + ) + (zone + (net 1) + (net_name "/GND") + (layer "F.Cu") + (uuid "70aec177-223c-5f93-8ff7-8cb22a539fd3") + (name "GND_F") + (hatch edge 0.5) + (connect_pads yes + (clearance 0.3) + ) + (min_thickness 0.25) + (filled_areas_thickness no) + (fill yes + (thermal_gap 0.5) + (thermal_bridge_width 0.5) + ) + (polygon + (pts + (xy 100.25 100.25) + (xy 179.75 100.25) + (xy 179.75 163.09) + (xy 100.25 163.09) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 100.75 100.55) + (xy 100.75 100.65) + (xy 100.65 100.65) + (xy 100.65 100.75) + (xy 100.55 100.75) + (xy 100.55 162.55) + (xy 100.65 162.55) + (xy 100.65 162.65) + (xy 100.75 162.65) + (xy 100.75 162.75) + (xy 118.35 162.75) + (xy 118.35 162.65) + (xy 118.45 162.65) + (xy 118.45 162.55) + (xy 118.55 162.55) + (xy 118.55 156.65) + (xy 119.75 156.65) + (xy 119.75 156.55) + (xy 119.85 156.55) + (xy 119.85 156.45) + (xy 119.95 156.45) + (xy 119.95 156.35) + (xy 119.85 156.35) + (xy 119.85 156.25) + (xy 119.75 156.25) + (xy 119.75 156.15) + (xy 119.55 156.15) + (xy 119.55 155.95) + (xy 119.45 155.95) + (xy 119.45 155.35) + (xy 115.95 155.35) + (xy 115.95 156.25) + (xy 115.85 156.25) + (xy 115.85 156.55) + (xy 115.75 156.55) + (xy 115.75 156.75) + (xy 115.65 156.75) + (xy 115.65 156.95) + (xy 115.55 156.95) + (xy 115.55 157.05) + (xy 115.45 157.05) + (xy 115.45 157.15) + (xy 115.35 157.15) + (xy 115.35 157.25) + (xy 115.25 157.25) + (xy 115.25 157.35) + (xy 115.15 157.35) + (xy 115.15 157.45) + (xy 114.95 157.45) + (xy 114.95 157.55) + (xy 114.75 157.55) + (xy 114.75 157.65) + (xy 114.55 157.65) + (xy 114.55 157.75) + (xy 113.45 157.75) + (xy 113.45 157.65) + (xy 113.15 157.65) + (xy 113.15 157.55) + (xy 112.95 157.55) + (xy 112.95 157.45) + (xy 112.85 157.45) + (xy 112.85 157.35) + (xy 112.65 157.35) + (xy 112.65 157.25) + (xy 112.55 157.25) + (xy 112.55 157.15) + (xy 112.45 157.15) + (xy 112.45 157.05) + (xy 112.35 157.05) + (xy 112.35 156.85) + (xy 112.25 156.85) + (xy 112.25 156.65) + (xy 112.15 156.65) + (xy 112.15 156.45) + (xy 112.05 156.45) + (xy 112.05 155.95) + (xy 111.95 155.95) + (xy 111.95 155.65) + (xy 112.05 155.65) + (xy 112.05 155.15) + (xy 112.15 155.15) + (xy 112.15 154.95) + (xy 112.25 154.95) + (xy 112.25 154.75) + (xy 112.35 154.75) + (xy 112.35 154.55) + (xy 112.45 154.55) + (xy 112.45 154.45) + (xy 112.55 154.45) + (xy 112.55 154.35) + (xy 112.65 154.35) + (xy 112.65 154.25) + (xy 112.85 154.25) + (xy 112.85 154.15) + (xy 112.95 154.15) + (xy 112.95 154.05) + (xy 113.15 154.05) + (xy 113.15 153.95) + (xy 113.45 153.95) + (xy 113.45 153.85) + (xy 114.55 153.85) + (xy 114.55 153.95) + (xy 114.75 153.95) + (xy 114.75 154.05) + (xy 114.95 154.05) + (xy 114.95 154.15) + (xy 115.15 154.15) + (xy 115.15 154.25) + (xy 115.25 154.25) + (xy 115.25 154.35) + (xy 115.35 154.35) + (xy 115.35 154.45) + (xy 115.45 154.45) + (xy 115.45 154.55) + (xy 115.55 154.55) + (xy 115.55 154.65) + (xy 115.65 154.65) + (xy 115.65 154.85) + (xy 115.75 154.85) + (xy 115.75 155.05) + (xy 115.85 155.05) + (xy 115.85 155.35) + (xy 115.95 155.35) + (xy 119.45 155.35) + (xy 119.45 154.05) + (xy 119.55 154.05) + (xy 119.55 153.85) + (xy 119.75 153.85) + (xy 119.75 153.75) + (xy 120.95 153.75) + (xy 120.95 153.65) + (xy 121.05 153.65) + (xy 121.05 153.55) + (xy 121.15 153.55) + (xy 121.15 153.45) + (xy 121.25 153.45) + (xy 121.25 153.35) + (xy 121.35 153.35) + (xy 121.35 153.25) + (xy 121.45 153.25) + (xy 121.45 153.15) + (xy 121.55 153.15) + (xy 121.55 153.05) + (xy 121.65 153.05) + (xy 121.65 152.95) + (xy 121.75 152.95) + (xy 121.75 152.85) + (xy 121.85 152.85) + (xy 121.85 152.75) + (xy 121.95 152.75) + (xy 121.95 152.65) + (xy 122.05 152.65) + (xy 122.05 152.55) + (xy 123.35 152.55) + (xy 123.35 152.45) + (xy 123.45 152.45) + (xy 123.45 152.35) + (xy 123.55 152.35) + (xy 123.55 152.25) + (xy 123.45 152.25) + (xy 123.45 152.15) + (xy 123.35 152.15) + (xy 123.35 152.05) + (xy 123.25 152.05) + (xy 123.25 151.95) + (xy 123.15 151.95) + (xy 123.15 150.95) + (xy 123.25 150.95) + (xy 123.25 150.75) + (xy 123.15 150.75) + (xy 123.15 149.65) + (xy 123.25 149.65) + (xy 123.25 149.45) + (xy 123.15 149.45) + (xy 123.15 148.35) + (xy 123.25 148.35) + (xy 123.25 148.15) + (xy 123.15 148.15) + (xy 123.15 147.15) + (xy 123.25 147.15) + (xy 123.25 147.05) + (xy 123.35 147.05) + (xy 123.35 146.95) + (xy 123.25 146.95) + (xy 123.25 146.85) + (xy 123.15 146.85) + (xy 123.15 146.75) + (xy 122.65 146.75) + (xy 122.65 146.65) + (xy 122.55 146.65) + (xy 122.55 146.55) + (xy 122.45 146.55) + (xy 122.45 146.45) + (xy 122.35 146.45) + (xy 122.35 145.75) + (xy 122.45 145.75) + (xy 122.45 145.65) + (xy 122.55 145.65) + (xy 122.55 145.55) + (xy 122.65 145.55) + (xy 122.65 145.45) + (xy 122.95 145.45) + (xy 122.95 145.35) + (xy 123.05 145.35) + (xy 123.05 145.25) + (xy 123.15 145.25) + (xy 123.15 144.55) + (xy 123.25 144.55) + (xy 123.25 144.35) + (xy 123.15 144.35) + (xy 123.15 144.25) + (xy 123.05 144.25) + (xy 123.05 144.15) + (xy 122.95 144.15) + (xy 122.95 144.25) + (xy 122.85 144.25) + (xy 122.85 144.35) + (xy 122.75 144.35) + (xy 122.75 144.45) + (xy 122.65 144.45) + (xy 122.65 144.55) + (xy 122.55 144.55) + (xy 122.55 144.65) + (xy 122.45 144.65) + (xy 122.45 144.75) + (xy 122.35 144.75) + (xy 122.35 144.85) + (xy 122.25 144.85) + (xy 122.25 144.95) + (xy 122.15 144.95) + (xy 122.15 145.05) + (xy 122.05 145.05) + (xy 122.05 145.15) + (xy 121.95 145.15) + (xy 121.95 145.25) + (xy 121.85 145.25) + (xy 121.85 145.35) + (xy 121.75 145.35) + (xy 121.75 145.45) + (xy 121.65 145.45) + (xy 121.65 145.55) + (xy 121.55 145.55) + (xy 121.55 145.85) + (xy 121.45 145.85) + (xy 121.45 146.05) + (xy 121.35 146.05) + (xy 121.35 146.15) + (xy 121.25 146.15) + (xy 121.25 146.25) + (xy 121.15 146.25) + (xy 121.15 146.35) + (xy 121.05 146.35) + (xy 121.05 146.45) + (xy 120.95 146.45) + (xy 120.95 146.55) + (xy 120.85 146.55) + (xy 120.85 146.85) + (xy 120.75 146.85) + (xy 120.75 146.95) + (xy 120.65 146.95) + (xy 120.65 147.05) + (xy 120.75 147.05) + (xy 120.75 147.15) + (xy 120.85 147.15) + (xy 120.85 148.15) + (xy 120.75 148.15) + (xy 120.75 148.35) + (xy 120.85 148.35) + (xy 120.85 149.45) + (xy 120.75 149.45) + (xy 120.75 149.65) + (xy 120.85 149.65) + (xy 120.85 150.75) + (xy 120.75 150.75) + (xy 120.75 150.95) + (xy 120.85 150.95) + (xy 120.85 151.95) + (xy 120.75 151.95) + (xy 120.75 152.05) + (xy 120.65 152.05) + (xy 120.65 152.15) + (xy 118.45 152.15) + (xy 118.45 152.05) + (xy 118.25 152.05) + (xy 118.25 151.85) + (xy 118.15 151.85) + (xy 118.15 150.95) + (xy 118.25 150.95) + (xy 118.25 150.85) + (xy 118.35 150.85) + (xy 118.35 150.75) + (xy 118.25 150.75) + (xy 118.25 150.65) + (xy 118.15 150.65) + (xy 118.15 149.75) + (xy 118.25 149.75) + (xy 118.25 149.55) + (xy 118.35 149.55) + (xy 118.35 149.45) + (xy 118.25 149.45) + (xy 118.25 149.35) + (xy 118.15 149.35) + (xy 118.15 149.25) + (xy 118.05 149.25) + (xy 118.05 149.15) + (xy 110.85 149.15) + (xy 110.85 149.05) + (xy 110.75 149.05) + (xy 110.75 148.95) + (xy 110.65 148.95) + (xy 110.65 148.85) + (xy 110.55 148.85) + (xy 110.55 148.75) + (xy 110.45 148.75) + (xy 110.45 148.65) + (xy 110.35 148.65) + (xy 110.35 148.55) + (xy 110.25 148.55) + (xy 110.25 148.45) + (xy 110.15 148.45) + (xy 110.15 148.35) + (xy 110.05 148.35) + (xy 110.05 148.25) + (xy 109.65 148.25) + (xy 109.65 148.15) + (xy 109.55 148.15) + (xy 109.55 148.05) + (xy 109.45 148.05) + (xy 109.45 147.95) + (xy 109.35 147.95) + (xy 109.35 147.25) + (xy 109.25 147.25) + (xy 109.25 147.15) + (xy 109.15 147.15) + (xy 109.15 147.05) + (xy 108.35 147.05) + (xy 108.35 147.15) + (xy 106.65 147.15) + (xy 106.65 147.25) + (xy 106.55 147.25) + (xy 106.55 147.35) + (xy 106.45 147.35) + (xy 106.45 147.45) + (xy 106.35 147.45) + (xy 106.35 147.55) + (xy 105.65 147.55) + (xy 105.65 147.45) + (xy 105.55 147.45) + (xy 105.55 147.35) + (xy 105.45 147.35) + (xy 105.45 147.25) + (xy 105.35 147.25) + (xy 105.35 146.95) + (xy 105.25 146.95) + (xy 105.25 146.85) + (xy 105.35 146.85) + (xy 105.35 146.55) + (xy 105.45 146.55) + (xy 105.45 146.35) + (xy 105.65 146.35) + (xy 105.65 146.25) + (xy 105.85 146.25) + (xy 105.85 146.15) + (xy 106.15 146.15) + (xy 106.15 146.05) + (xy 106.25 146.05) + (xy 106.25 145.95) + (xy 106.35 145.95) + (xy 106.35 145.15) + (xy 106.25 145.15) + (xy 106.25 145.05) + (xy 106.15 145.05) + (xy 106.15 144.95) + (xy 105.95 144.95) + (xy 105.95 144.85) + (xy 105.75 144.85) + (xy 105.75 144.75) + (xy 105.65 144.75) + (xy 105.65 144.65) + (xy 105.55 144.65) + (xy 105.55 144.45) + (xy 105.45 144.45) + (xy 105.45 144.05) + (xy 105.55 144.05) + (xy 105.55 143.85) + (xy 105.65 143.85) + (xy 105.65 143.65) + (xy 105.55 143.65) + (xy 105.55 143.45) + (xy 105.45 143.45) + (xy 105.45 143.05) + (xy 105.55 143.05) + (xy 105.55 142.85) + (xy 105.65 142.85) + (xy 105.65 142.75) + (xy 105.75 142.75) + (xy 105.75 142.65) + (xy 105.95 142.65) + (xy 105.95 142.55) + (xy 106.15 142.55) + (xy 106.15 142.45) + (xy 106.25 142.45) + (xy 106.25 142.35) + (xy 106.35 142.35) + (xy 106.35 142.05) + (xy 106.25 142.05) + (xy 106.25 141.95) + (xy 106.15 141.95) + (xy 106.15 141.85) + (xy 105.85 141.85) + (xy 105.85 141.75) + (xy 105.65 141.75) + (xy 105.65 141.65) + (xy 105.45 141.65) + (xy 105.45 141.45) + (xy 105.35 141.45) + (xy 105.35 141.15) + (xy 105.25 141.15) + (xy 105.25 141.05) + (xy 105.35 141.05) + (xy 105.35 140.75) + (xy 105.45 140.75) + (xy 105.45 140.65) + (xy 105.55 140.65) + (xy 105.55 140.55) + (xy 105.65 140.55) + (xy 105.65 140.45) + (xy 106.35 140.45) + (xy 106.35 140.55) + (xy 106.45 140.55) + (xy 106.45 140.65) + (xy 106.55 140.65) + (xy 106.55 140.75) + (xy 106.65 140.75) + (xy 106.65 140.85) + (xy 108.35 140.85) + (xy 108.35 140.95) + (xy 110.45 140.95) + (xy 110.45 140.85) + (xy 110.55 140.85) + (xy 110.55 140.75) + (xy 110.65 140.75) + (xy 110.65 140.65) + (xy 110.55 140.65) + (xy 110.55 138.95) + (xy 110.65 138.95) + (xy 110.65 138.85) + (xy 111.35 138.85) + (xy 111.35 138.75) + (xy 111.45 138.75) + (xy 111.45 138.65) + (xy 111.55 138.65) + (xy 111.55 138.55) + (xy 111.65 138.55) + (xy 111.65 138.45) + (xy 111.75 138.45) + (xy 111.75 138.35) + (xy 111.85 138.35) + (xy 111.85 138.25) + (xy 111.95 138.25) + (xy 111.95 138.15) + (xy 112.05 138.15) + (xy 112.05 138.05) + (xy 112.15 138.05) + (xy 112.15 137.95) + (xy 112.25 137.95) + (xy 112.25 137.85) + (xy 112.35 137.85) + (xy 112.35 137.75) + (xy 112.45 137.75) + (xy 112.45 137.65) + (xy 112.55 137.65) + (xy 112.55 137.55) + (xy 112.65 137.55) + (xy 112.65 137.45) + (xy 112.75 137.45) + (xy 112.75 137.35) + (xy 112.85 137.35) + (xy 112.85 137.25) + (xy 113.05 137.25) + (xy 113.05 137.15) + (xy 117.35 137.15) + (xy 117.35 137.05) + (xy 117.75 137.05) + (xy 117.75 136.95) + (xy 117.85 136.95) + (xy 117.85 136.85) + (xy 117.95 136.85) + (xy 117.95 136.75) + (xy 117.85 136.75) + (xy 117.85 136.65) + (xy 117.75 136.65) + (xy 117.75 136.55) + (xy 117.15 136.55) + (xy 117.15 136.45) + (xy 116.95 136.45) + (xy 116.95 136.25) + (xy 116.85 136.25) + (xy 116.85 133.75) + (xy 116.95 133.75) + (xy 116.95 133.55) + (xy 117.15 133.55) + (xy 117.15 133.45) + (xy 117.75 133.45) + (xy 117.75 133.35) + (xy 117.85 133.35) + (xy 117.85 133.25) + (xy 117.95 133.25) + (xy 117.95 129.25) + (xy 107.45 129.25) + (xy 107.45 129.75) + (xy 107.35 129.75) + (xy 107.35 130.05) + (xy 107.25 130.05) + (xy 107.25 130.25) + (xy 107.15 130.25) + (xy 107.15 130.35) + (xy 107.05 130.35) + (xy 107.05 130.55) + (xy 106.85 130.55) + (xy 106.85 130.65) + (xy 106.75 130.65) + (xy 106.75 130.75) + (xy 106.55 130.75) + (xy 106.55 130.85) + (xy 104.05 130.85) + (xy 104.05 130.75) + (xy 103.85 130.75) + (xy 103.85 130.65) + (xy 103.75 130.65) + (xy 103.75 130.55) + (xy 103.55 130.55) + (xy 103.55 130.35) + (xy 103.45 130.35) + (xy 103.45 130.25) + (xy 103.35 130.25) + (xy 103.35 130.05) + (xy 103.25 130.05) + (xy 103.25 129.75) + (xy 103.15 129.75) + (xy 103.15 129.25) + (xy 103.25 129.25) + (xy 103.25 128.95) + (xy 103.35 128.95) + (xy 103.35 128.75) + (xy 103.45 128.75) + (xy 103.45 128.65) + (xy 103.55 128.65) + (xy 103.55 128.45) + (xy 103.75 128.45) + (xy 103.75 128.35) + (xy 103.85 128.35) + (xy 103.85 128.25) + (xy 104.05 128.25) + (xy 104.05 128.15) + (xy 106.55 128.15) + (xy 106.55 128.25) + (xy 106.75 128.25) + (xy 106.75 128.35) + (xy 106.85 128.35) + (xy 106.85 128.45) + (xy 107.05 128.45) + (xy 107.05 128.65) + (xy 107.15 128.65) + (xy 107.15 128.75) + (xy 107.25 128.75) + (xy 107.25 128.95) + (xy 107.35 128.95) + (xy 107.35 129.25) + (xy 107.45 129.25) + (xy 117.95 129.25) + (xy 117.95 122.55) + (xy 117.25 122.55) + (xy 117.25 125.45) + (xy 117.15 125.45) + (xy 117.15 125.55) + (xy 117.05 125.55) + (xy 117.05 125.65) + (xy 114.95 125.65) + (xy 114.95 125.55) + (xy 114.85 125.55) + (xy 114.85 125.45) + (xy 114.75 125.45) + (xy 114.75 124.95) + (xy 114.65 124.95) + (xy 114.65 124.85) + (xy 114.55 124.85) + (xy 114.55 124.75) + (xy 113.85 124.75) + (xy 113.85 124.85) + (xy 113.75 124.85) + (xy 113.75 124.95) + (xy 113.65 124.95) + (xy 113.65 127.25) + (xy 113.55 127.25) + (xy 113.55 127.35) + (xy 111.05 127.35) + (xy 111.05 127.25) + (xy 110.95 127.25) + (xy 110.95 124.55) + (xy 104.45 124.55) + (xy 104.45 125.45) + (xy 104.35 125.45) + (xy 104.35 125.65) + (xy 104.25 125.65) + (xy 104.25 125.75) + (xy 104.15 125.75) + (xy 104.15 125.85) + (xy 104.05 125.85) + (xy 104.05 125.95) + (xy 103.95 125.95) + (xy 103.95 126.05) + (xy 103.75 126.05) + (xy 103.75 126.15) + (xy 102.85 126.15) + (xy 102.85 126.05) + (xy 102.65 126.05) + (xy 102.65 125.95) + (xy 102.55 125.95) + (xy 102.55 125.85) + (xy 102.45 125.85) + (xy 102.45 125.75) + (xy 102.35 125.75) + (xy 102.35 125.65) + (xy 102.25 125.65) + (xy 102.25 125.45) + (xy 102.15 125.45) + (xy 102.15 124.55) + (xy 102.25 124.55) + (xy 102.25 124.35) + (xy 102.35 124.35) + (xy 102.35 124.25) + (xy 102.45 124.25) + (xy 102.45 124.15) + (xy 102.55 124.15) + (xy 102.55 124.05) + (xy 102.65 124.05) + (xy 102.65 123.95) + (xy 102.85 123.95) + (xy 102.85 123.85) + (xy 103.75 123.85) + (xy 103.75 123.95) + (xy 103.95 123.95) + (xy 103.95 124.05) + (xy 104.05 124.05) + (xy 104.05 124.15) + (xy 104.15 124.15) + (xy 104.15 124.25) + (xy 104.25 124.25) + (xy 104.25 124.35) + (xy 104.35 124.35) + (xy 104.35 124.55) + (xy 104.45 124.55) + (xy 110.95 124.55) + (xy 110.95 122.75) + (xy 111.05 122.75) + (xy 111.05 122.65) + (xy 113.55 122.65) + (xy 113.55 122.75) + (xy 113.65 122.75) + (xy 113.65 123.05) + (xy 113.75 123.05) + (xy 113.75 123.15) + (xy 113.85 123.15) + (xy 113.85 123.25) + (xy 114.55 123.25) + (xy 114.55 123.15) + (xy 114.65 123.15) + (xy 114.65 123.05) + (xy 114.75 123.05) + (xy 114.75 122.55) + (xy 114.85 122.55) + (xy 114.85 122.45) + (xy 114.95 122.45) + (xy 114.95 122.35) + (xy 117.05 122.35) + (xy 117.05 122.45) + (xy 117.15 122.45) + (xy 117.15 122.55) + (xy 117.25 122.55) + (xy 117.95 122.55) + (xy 117.95 122.15) + (xy 118.05 122.15) + (xy 118.05 122.05) + (xy 118.15 122.05) + (xy 118.15 121.85) + (xy 118.25 121.85) + (xy 118.25 121.75) + (xy 118.35 121.75) + (xy 118.35 121.65) + (xy 118.45 121.65) + (xy 118.45 121.55) + (xy 118.55 121.55) + (xy 118.55 121.45) + (xy 118.65 121.45) + (xy 118.65 120.95) + (xy 118.55 120.95) + (xy 118.55 120.85) + (xy 118.45 120.85) + (xy 118.45 120.75) + (xy 117.45 120.75) + (xy 117.45 120.85) + (xy 117.35 120.85) + (xy 117.35 120.95) + (xy 117.25 120.95) + (xy 117.25 121.45) + (xy 117.15 121.45) + (xy 117.15 121.55) + (xy 117.05 121.55) + (xy 117.05 121.65) + (xy 114.95 121.65) + (xy 114.95 121.55) + (xy 114.85 121.55) + (xy 114.85 121.45) + (xy 114.75 121.45) + (xy 114.75 120.25) + (xy 107.45 120.25) + (xy 107.45 120.75) + (xy 107.35 120.75) + (xy 107.35 121.05) + (xy 107.25 121.05) + (xy 107.25 121.25) + (xy 107.15 121.25) + (xy 107.15 121.35) + (xy 107.05 121.35) + (xy 107.05 121.55) + (xy 106.85 121.55) + (xy 106.85 121.65) + (xy 106.75 121.65) + (xy 106.75 121.75) + (xy 106.55 121.75) + (xy 106.55 121.85) + (xy 104.05 121.85) + (xy 104.05 121.75) + (xy 103.85 121.75) + (xy 103.85 121.65) + (xy 103.75 121.65) + (xy 103.75 121.55) + (xy 103.55 121.55) + (xy 103.55 121.35) + (xy 103.45 121.35) + (xy 103.45 121.25) + (xy 103.35 121.25) + (xy 103.35 121.05) + (xy 103.25 121.05) + (xy 103.25 120.75) + (xy 103.15 120.75) + (xy 103.15 120.25) + (xy 103.25 120.25) + (xy 103.25 119.95) + (xy 103.35 119.95) + (xy 103.35 119.75) + (xy 103.45 119.75) + (xy 103.45 119.65) + (xy 103.55 119.65) + (xy 103.55 119.45) + (xy 103.75 119.45) + (xy 103.75 119.35) + (xy 103.85 119.35) + (xy 103.85 119.25) + (xy 104.05 119.25) + (xy 104.05 119.15) + (xy 106.55 119.15) + (xy 106.55 119.25) + (xy 106.75 119.25) + (xy 106.75 119.35) + (xy 106.85 119.35) + (xy 106.85 119.45) + (xy 107.05 119.45) + (xy 107.05 119.65) + (xy 107.15 119.65) + (xy 107.15 119.75) + (xy 107.25 119.75) + (xy 107.25 119.95) + (xy 107.35 119.95) + (xy 107.35 120.25) + (xy 107.45 120.25) + (xy 114.75 120.25) + (xy 114.75 118.55) + (xy 114.85 118.55) + (xy 114.85 118.45) + (xy 114.95 118.45) + (xy 114.95 118.35) + (xy 117.05 118.35) + (xy 117.05 118.45) + (xy 117.15 118.45) + (xy 117.15 118.55) + (xy 117.25 118.55) + (xy 117.25 119.05) + (xy 117.35 119.05) + (xy 117.35 119.15) + (xy 117.45 119.15) + (xy 117.45 119.25) + (xy 117.85 119.25) + (xy 117.85 119.15) + (xy 117.95 119.15) + (xy 117.95 119.05) + (xy 118.05 119.05) + (xy 118.05 106.25) + (xy 117.95 106.25) + (xy 117.95 106.15) + (xy 117.85 106.15) + (xy 117.85 106.05) + (xy 116.95 106.05) + (xy 116.95 106.15) + (xy 116.85 106.15) + (xy 116.85 106.25) + (xy 116.75 106.25) + (xy 116.75 106.35) + (xy 116.85 106.35) + (xy 116.85 106.45) + (xy 116.95 106.45) + (xy 116.95 106.65) + (xy 117.05 106.65) + (xy 117.05 106.85) + (xy 117.15 106.85) + (xy 117.15 107.25) + (xy 117.25 107.25) + (xy 117.25 107.85) + (xy 117.15 107.85) + (xy 117.15 108.25) + (xy 117.05 108.25) + (xy 117.05 108.45) + (xy 116.95 108.45) + (xy 116.95 108.65) + (xy 116.85 108.65) + (xy 116.85 108.75) + (xy 116.75 108.75) + (xy 116.75 108.85) + (xy 116.65 108.85) + (xy 116.65 108.95) + (xy 116.55 108.95) + (xy 116.55 109.05) + (xy 116.45 109.05) + (xy 116.45 109.15) + (xy 116.35 109.15) + (xy 116.35 109.25) + (xy 116.15 109.25) + (xy 116.15 109.35) + (xy 115.95 109.35) + (xy 115.95 109.45) + (xy 115.55 109.45) + (xy 115.55 109.55) + (xy 114.95 109.55) + (xy 114.95 109.45) + (xy 114.55 109.45) + (xy 114.55 109.35) + (xy 114.35 109.35) + (xy 114.35 109.25) + (xy 114.15 109.25) + (xy 114.15 109.15) + (xy 114.05 109.15) + (xy 114.05 109.05) + (xy 113.95 109.05) + (xy 113.95 108.95) + (xy 113.85 108.95) + (xy 113.85 108.85) + (xy 113.75 108.85) + (xy 113.75 108.75) + (xy 113.65 108.75) + (xy 113.65 108.65) + (xy 113.55 108.65) + (xy 113.55 108.45) + (xy 113.45 108.45) + (xy 113.45 108.25) + (xy 113.35 108.25) + (xy 113.35 107.95) + (xy 113.25 107.95) + (xy 113.25 107.15) + (xy 113.35 107.15) + (xy 113.35 106.85) + (xy 113.45 106.85) + (xy 113.45 106.55) + (xy 113.55 106.55) + (xy 113.55 106.45) + (xy 113.65 106.45) + (xy 113.65 106.25) + (xy 113.55 106.25) + (xy 113.55 106.15) + (xy 113.45 106.15) + (xy 113.45 106.05) + (xy 106.85 106.05) + (xy 106.85 106.15) + (xy 106.75 106.15) + (xy 106.75 106.25) + (xy 106.65 106.25) + (xy 106.65 106.65) + (xy 106.55 106.65) + (xy 106.55 109.15) + (xy 106.45 109.15) + (xy 106.45 109.35) + (xy 106.35 109.35) + (xy 106.35 109.45) + (xy 106.25 109.45) + (xy 106.25 109.55) + (xy 106.15 109.55) + (xy 106.15 109.65) + (xy 106.05 109.65) + (xy 106.05 109.75) + (xy 105.95 109.75) + (xy 105.95 109.85) + (xy 105.85 109.85) + (xy 105.85 109.95) + (xy 105.75 109.95) + (xy 105.75 110.05) + (xy 105.65 110.05) + (xy 105.65 110.35) + (xy 105.75 110.35) + (xy 105.75 110.55) + (xy 105.85 110.55) + (xy 105.85 111.25) + (xy 105.75 111.25) + (xy 105.75 111.45) + (xy 105.65 111.45) + (xy 105.65 111.65) + (xy 105.55 111.65) + (xy 105.55 111.75) + (xy 105.45 111.75) + (xy 105.45 111.85) + (xy 105.35 111.85) + (xy 105.35 111.95) + (xy 105.15 111.95) + (xy 105.15 112.05) + (xy 104.85 112.05) + (xy 104.85 112.15) + (xy 104.15 112.15) + (xy 104.15 112.05) + (xy 103.85 112.05) + (xy 103.85 111.95) + (xy 103.65 111.95) + (xy 103.65 111.85) + (xy 103.55 111.85) + (xy 103.55 111.75) + (xy 103.45 111.75) + (xy 103.45 111.65) + (xy 103.35 111.65) + (xy 103.35 111.45) + (xy 103.25 111.45) + (xy 103.25 111.25) + (xy 103.15 111.25) + (xy 103.15 110.55) + (xy 103.25 110.55) + (xy 103.25 110.35) + (xy 103.35 110.35) + (xy 103.35 110.15) + (xy 103.45 110.15) + (xy 103.45 110.05) + (xy 103.55 110.05) + (xy 103.55 109.95) + (xy 103.65 109.95) + (xy 103.65 109.85) + (xy 103.75 109.85) + (xy 103.75 109.75) + (xy 103.85 109.75) + (xy 103.85 109.55) + (xy 103.75 109.55) + (xy 103.75 109.45) + (xy 103.65 109.45) + (xy 103.65 109.35) + (xy 103.55 109.35) + (xy 103.55 109.25) + (xy 103.45 109.25) + (xy 103.45 109.15) + (xy 103.35 109.15) + (xy 103.35 108.95) + (xy 103.25 108.95) + (xy 103.25 108.75) + (xy 103.15 108.75) + (xy 103.15 108.05) + (xy 103.25 108.05) + (xy 103.25 107.85) + (xy 103.35 107.85) + (xy 103.35 107.65) + (xy 103.45 107.65) + (xy 103.45 107.55) + (xy 103.55 107.55) + (xy 103.55 107.45) + (xy 103.65 107.45) + (xy 103.65 107.35) + (xy 103.75 107.35) + (xy 103.75 107.25) + (xy 103.85 107.25) + (xy 103.85 107.05) + (xy 103.75 107.05) + (xy 103.75 106.95) + (xy 103.65 106.95) + (xy 103.65 106.85) + (xy 103.55 106.85) + (xy 103.55 106.75) + (xy 103.45 106.75) + (xy 103.45 106.65) + (xy 103.35 106.65) + (xy 103.35 106.45) + (xy 103.25 106.45) + (xy 103.25 106.25) + (xy 103.15 106.25) + (xy 103.15 105.55) + (xy 103.25 105.55) + (xy 103.25 105.35) + (xy 103.35 105.35) + (xy 103.35 105.15) + (xy 103.45 105.15) + (xy 103.45 105.05) + (xy 103.55 105.05) + (xy 103.55 104.95) + (xy 103.65 104.95) + (xy 103.65 104.85) + (xy 103.55 104.85) + (xy 103.55 104.75) + (xy 103.45 104.75) + (xy 103.45 104.65) + (xy 103.35 104.65) + (xy 103.35 104.55) + (xy 103.25 104.55) + (xy 103.25 104.45) + (xy 103.15 104.45) + (xy 103.15 102.35) + (xy 103.25 102.35) + (xy 103.25 102.25) + (xy 103.35 102.25) + (xy 103.35 102.15) + (xy 105.65 102.15) + (xy 105.65 102.25) + (xy 105.75 102.25) + (xy 105.75 102.35) + (xy 105.85 102.35) + (xy 105.85 102.45) + (xy 105.95 102.45) + (xy 105.95 102.55) + (xy 106.05 102.55) + (xy 106.05 102.65) + (xy 109.05 102.65) + (xy 109.05 102.55) + (xy 109.15 102.55) + (xy 109.15 102.45) + (xy 109.25 102.45) + (xy 109.25 102.05) + (xy 109.35 102.05) + (xy 109.35 101.95) + (xy 109.45 101.95) + (xy 109.45 101.85) + (xy 109.55 101.85) + (xy 109.55 101.75) + (xy 109.85 101.75) + (xy 109.85 101.65) + (xy 109.95 101.65) + (xy 109.95 101.55) + (xy 110.05 101.55) + (xy 110.05 101.45) + (xy 110.15 101.45) + (xy 110.15 101.35) + (xy 110.25 101.35) + (xy 110.25 101.25) + (xy 110.35 101.25) + (xy 110.35 101.15) + (xy 110.45 101.15) + (xy 110.45 101.05) + (xy 110.55 101.05) + (xy 110.55 100.95) + (xy 110.65 100.95) + (xy 110.65 100.85) + (xy 110.75 100.85) + (xy 110.75 100.75) + (xy 110.65 100.75) + (xy 110.65 100.65) + (xy 110.55 100.65) + (xy 110.55 100.55) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 136.35 100.55) + (xy 136.35 100.65) + (xy 136.25 100.65) + (xy 136.25 100.75) + (xy 136.15 100.75) + (xy 136.15 100.85) + (xy 136.25 100.85) + (xy 136.25 100.95) + (xy 136.35 100.95) + (xy 136.35 101.05) + (xy 136.45 101.05) + (xy 136.45 101.15) + (xy 136.55 101.15) + (xy 136.55 101.35) + (xy 136.65 101.35) + (xy 136.65 101.55) + (xy 136.75 101.55) + (xy 136.75 102.25) + (xy 136.65 102.25) + (xy 136.65 102.45) + (xy 136.55 102.45) + (xy 136.55 102.65) + (xy 136.45 102.65) + (xy 136.45 102.75) + (xy 136.35 102.75) + (xy 136.35 102.85) + (xy 136.15 102.85) + (xy 136.15 102.95) + (xy 135.95 102.95) + (xy 135.95 103.05) + (xy 135.55 103.05) + (xy 135.55 103.15) + (xy 135.45 103.15) + (xy 135.45 103.25) + (xy 135.35 103.25) + (xy 135.35 103.35) + (xy 135.25 103.35) + (xy 135.25 103.45) + (xy 135.15 103.45) + (xy 135.15 103.55) + (xy 135.05 103.55) + (xy 135.05 103.65) + (xy 134.95 103.65) + (xy 134.95 103.75) + (xy 134.85 103.75) + (xy 134.85 103.85) + (xy 134.75 103.85) + (xy 134.75 103.95) + (xy 134.65 103.95) + (xy 134.65 104.05) + (xy 134.55 104.05) + (xy 134.55 104.15) + (xy 134.45 104.15) + (xy 134.45 104.25) + (xy 134.35 104.25) + (xy 134.35 104.35) + (xy 134.25 104.35) + (xy 134.25 104.45) + (xy 134.15 104.45) + (xy 134.15 104.55) + (xy 134.05 104.55) + (xy 134.05 104.65) + (xy 133.95 104.65) + (xy 133.95 113.95) + (xy 134.05 113.95) + (xy 134.05 114.05) + (xy 134.15 114.05) + (xy 134.15 114.15) + (xy 134.25 114.15) + (xy 134.25 114.25) + (xy 134.35 114.25) + (xy 134.35 114.15) + (xy 134.45 114.15) + (xy 134.45 114.05) + (xy 134.55 114.05) + (xy 134.55 113.95) + (xy 134.65 113.95) + (xy 134.65 113.75) + (xy 134.75 113.75) + (xy 134.75 113.65) + (xy 134.95 113.65) + (xy 134.95 113.55) + (xy 135.15 113.55) + (xy 135.15 113.45) + (xy 135.95 113.45) + (xy 135.95 113.55) + (xy 136.15 113.55) + (xy 136.15 113.65) + (xy 136.35 113.65) + (xy 136.35 113.75) + (xy 136.45 113.75) + (xy 136.45 113.85) + (xy 136.55 113.85) + (xy 136.55 114.05) + (xy 136.65 114.05) + (xy 136.65 114.15) + (xy 136.75 114.15) + (xy 136.75 114.25) + (xy 136.85 114.25) + (xy 136.85 114.15) + (xy 136.95 114.15) + (xy 136.95 114.05) + (xy 137.05 114.05) + (xy 137.05 113.95) + (xy 137.15 113.95) + (xy 137.15 113.85) + (xy 137.25 113.85) + (xy 137.25 113.75) + (xy 137.35 113.75) + (xy 137.35 113.65) + (xy 137.45 113.65) + (xy 137.45 113.55) + (xy 137.65 113.55) + (xy 137.65 113.45) + (xy 138.55 113.45) + (xy 138.55 113.55) + (xy 138.75 113.55) + (xy 138.75 113.45) + (xy 138.85 113.45) + (xy 138.85 113.35) + (xy 138.95 113.35) + (xy 138.95 103.55) + (xy 139.05 103.55) + (xy 139.05 103.45) + (xy 139.15 103.45) + (xy 139.15 103.25) + (xy 139.25 103.25) + (xy 139.25 103.15) + (xy 139.35 103.15) + (xy 139.35 103.05) + (xy 139.45 103.05) + (xy 139.45 102.95) + (xy 139.55 102.95) + (xy 139.55 102.85) + (xy 139.65 102.85) + (xy 139.65 102.75) + (xy 139.75 102.75) + (xy 139.75 102.65) + (xy 139.85 102.65) + (xy 139.85 102.55) + (xy 139.95 102.55) + (xy 139.95 102.45) + (xy 140.05 102.45) + (xy 140.05 102.35) + (xy 140.15 102.35) + (xy 140.15 101.55) + (xy 140.25 101.55) + (xy 140.25 101.35) + (xy 140.35 101.35) + (xy 140.35 101.15) + (xy 140.45 101.15) + (xy 140.45 101.05) + (xy 140.55 101.05) + (xy 140.55 100.95) + (xy 140.65 100.95) + (xy 140.65 100.85) + (xy 140.75 100.85) + (xy 140.75 100.75) + (xy 140.65 100.75) + (xy 140.65 100.65) + (xy 140.55 100.65) + (xy 140.55 100.55) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 142.05 100.55) + (xy 142.05 100.65) + (xy 141.95 100.65) + (xy 141.95 100.75) + (xy 141.85 100.75) + (xy 141.85 100.85) + (xy 141.95 100.85) + (xy 141.95 100.95) + (xy 142.05 100.95) + (xy 142.05 101.05) + (xy 142.15 101.05) + (xy 142.15 101.15) + (xy 142.25 101.15) + (xy 142.25 101.25) + (xy 142.35 101.25) + (xy 142.35 101.45) + (xy 142.45 101.45) + (xy 142.45 101.85) + (xy 142.55 101.85) + (xy 142.55 101.95) + (xy 142.45 101.95) + (xy 142.45 102.35) + (xy 142.35 102.35) + (xy 142.35 102.55) + (xy 142.25 102.55) + (xy 142.25 102.65) + (xy 142.15 102.65) + (xy 142.15 102.75) + (xy 142.05 102.75) + (xy 142.05 102.85) + (xy 141.95 102.85) + (xy 141.95 102.95) + (xy 141.75 102.95) + (xy 141.75 103.05) + (xy 141.65 103.05) + (xy 141.65 103.15) + (xy 141.55 103.15) + (xy 141.55 103.25) + (xy 141.45 103.25) + (xy 141.45 103.35) + (xy 141.35 103.35) + (xy 141.35 103.45) + (xy 141.25 103.45) + (xy 141.25 103.55) + (xy 141.15 103.55) + (xy 141.15 103.65) + (xy 141.05 103.65) + (xy 141.05 103.75) + (xy 140.95 103.75) + (xy 140.95 103.85) + (xy 140.85 103.85) + (xy 140.85 103.95) + (xy 140.75 103.95) + (xy 140.75 104.05) + (xy 140.65 104.05) + (xy 140.65 104.15) + (xy 140.55 104.15) + (xy 140.55 104.25) + (xy 140.45 104.25) + (xy 140.45 111.65) + (xy 140.55 111.65) + (xy 140.55 111.75) + (xy 140.65 111.75) + (xy 140.65 111.85) + (xy 141.05 111.85) + (xy 141.05 111.95) + (xy 141.15 111.95) + (xy 141.15 112.05) + (xy 141.25 112.05) + (xy 141.25 112.15) + (xy 141.35 112.15) + (xy 141.35 112.85) + (xy 141.25 112.85) + (xy 141.25 112.95) + (xy 141.15 112.95) + (xy 141.15 113.25) + (xy 141.25 113.25) + (xy 141.25 113.35) + (xy 141.35 113.35) + (xy 141.35 113.45) + (xy 141.75 113.45) + (xy 141.75 113.55) + (xy 141.95 113.55) + (xy 141.95 113.65) + (xy 142.05 113.65) + (xy 142.05 113.75) + (xy 142.15 113.75) + (xy 142.15 113.85) + (xy 142.25 113.85) + (xy 142.25 113.95) + (xy 142.35 113.95) + (xy 142.35 114.05) + (xy 142.45 114.05) + (xy 142.45 114.15) + (xy 142.55 114.15) + (xy 142.55 114.25) + (xy 142.65 114.25) + (xy 142.65 114.15) + (xy 142.75 114.15) + (xy 142.75 114.05) + (xy 142.85 114.05) + (xy 142.85 113.95) + (xy 142.95 113.95) + (xy 142.95 113.75) + (xy 143.05 113.75) + (xy 143.05 113.65) + (xy 143.25 113.65) + (xy 143.25 113.55) + (xy 143.45 113.55) + (xy 143.45 113.45) + (xy 144.25 113.45) + (xy 144.25 113.55) + (xy 144.45 113.55) + (xy 144.45 113.65) + (xy 144.65 113.65) + (xy 144.65 113.75) + (xy 144.75 113.75) + (xy 144.75 113.85) + (xy 144.85 113.85) + (xy 144.85 113.95) + (xy 144.95 113.95) + (xy 144.95 114.05) + (xy 145.35 114.05) + (xy 145.35 113.95) + (xy 145.45 113.95) + (xy 145.45 113.85) + (xy 145.55 113.85) + (xy 145.55 113.75) + (xy 145.65 113.75) + (xy 145.65 113.65) + (xy 145.75 113.65) + (xy 145.75 113.55) + (xy 145.95 113.55) + (xy 145.95 113.45) + (xy 146.85 113.45) + (xy 146.85 113.55) + (xy 147.05 113.55) + (xy 147.05 113.65) + (xy 147.15 113.65) + (xy 147.15 113.75) + (xy 147.25 113.75) + (xy 147.25 113.85) + (xy 147.35 113.85) + (xy 147.35 113.95) + (xy 147.45 113.95) + (xy 147.45 114.05) + (xy 147.85 114.05) + (xy 147.85 113.95) + (xy 147.95 113.95) + (xy 147.95 113.85) + (xy 148.05 113.85) + (xy 148.05 113.75) + (xy 148.15 113.75) + (xy 148.15 113.65) + (xy 148.35 113.65) + (xy 148.35 113.55) + (xy 148.55 113.55) + (xy 148.55 113.45) + (xy 149.35 113.45) + (xy 149.35 113.55) + (xy 149.55 113.55) + (xy 149.55 113.65) + (xy 149.75 113.65) + (xy 149.75 113.75) + (xy 149.85 113.75) + (xy 149.85 113.85) + (xy 149.95 113.85) + (xy 149.95 113.95) + (xy 150.05 113.95) + (xy 150.05 114.05) + (xy 150.45 114.05) + (xy 150.45 113.95) + (xy 150.55 113.95) + (xy 150.55 113.85) + (xy 150.65 113.85) + (xy 150.65 113.75) + (xy 150.75 113.75) + (xy 150.75 113.65) + (xy 150.85 113.65) + (xy 150.85 113.55) + (xy 151.05 113.55) + (xy 151.05 113.45) + (xy 151.95 113.45) + (xy 151.95 113.55) + (xy 152.15 113.55) + (xy 152.15 113.65) + (xy 152.25 113.65) + (xy 152.25 113.75) + (xy 152.35 113.75) + (xy 152.35 113.85) + (xy 152.45 113.85) + (xy 152.45 113.95) + (xy 152.55 113.95) + (xy 152.55 114.05) + (xy 152.95 114.05) + (xy 152.95 113.95) + (xy 153.05 113.95) + (xy 153.05 113.85) + (xy 153.15 113.85) + (xy 153.15 113.75) + (xy 153.25 113.75) + (xy 153.25 113.65) + (xy 153.35 113.65) + (xy 153.35 113.55) + (xy 153.55 113.55) + (xy 153.55 113.45) + (xy 154.45 113.45) + (xy 154.45 113.55) + (xy 154.65 113.55) + (xy 154.65 113.65) + (xy 154.75 113.65) + (xy 154.75 113.75) + (xy 154.85 113.75) + (xy 154.85 113.85) + (xy 154.95 113.85) + (xy 154.95 113.95) + (xy 155.05 113.95) + (xy 155.05 114.05) + (xy 155.15 114.05) + (xy 155.15 114.15) + (xy 155.25 114.15) + (xy 155.25 114.25) + (xy 155.35 114.25) + (xy 155.35 114.15) + (xy 155.45 114.15) + (xy 155.45 114.05) + (xy 155.55 114.05) + (xy 155.55 113.95) + (xy 155.65 113.95) + (xy 155.65 113.75) + (xy 155.75 113.75) + (xy 155.75 113.65) + (xy 155.95 113.65) + (xy 155.95 113.55) + (xy 156.15 113.55) + (xy 156.15 113.45) + (xy 156.95 113.45) + (xy 156.95 113.55) + (xy 157.15 113.55) + (xy 157.15 113.65) + (xy 157.35 113.65) + (xy 157.35 113.75) + (xy 157.45 113.75) + (xy 157.45 113.85) + (xy 157.55 113.85) + (xy 157.55 114.05) + (xy 157.65 114.05) + (xy 157.65 114.15) + (xy 157.75 114.15) + (xy 157.75 114.25) + (xy 157.85 114.25) + (xy 157.85 114.15) + (xy 157.95 114.15) + (xy 157.95 114.05) + (xy 158.05 114.05) + (xy 158.05 113.95) + (xy 158.15 113.95) + (xy 158.15 113.85) + (xy 158.25 113.85) + (xy 158.25 113.75) + (xy 158.35 113.75) + (xy 158.35 113.65) + (xy 158.45 113.65) + (xy 158.45 113.55) + (xy 158.65 113.55) + (xy 158.65 113.45) + (xy 158.75 113.45) + (xy 158.75 113.35) + (xy 158.85 113.35) + (xy 158.85 113.15) + (xy 158.75 113.15) + (xy 158.75 113.05) + (xy 158.65 113.05) + (xy 158.65 112.95) + (xy 158.55 112.95) + (xy 158.55 112.85) + (xy 158.45 112.85) + (xy 158.45 112.75) + (xy 158.35 112.75) + (xy 158.35 112.65) + (xy 158.25 112.65) + (xy 158.25 112.55) + (xy 158.15 112.55) + (xy 158.15 112.45) + (xy 158.05 112.45) + (xy 158.05 112.35) + (xy 157.95 112.35) + (xy 157.95 112.25) + (xy 157.85 112.25) + (xy 157.85 112.15) + (xy 157.65 112.15) + (xy 157.65 112.05) + (xy 157.55 112.05) + (xy 157.55 111.95) + (xy 157.45 111.95) + (xy 157.45 111.85) + (xy 157.35 111.85) + (xy 157.35 111.45) + (xy 157.25 111.45) + (xy 157.25 111.35) + (xy 157.15 111.35) + (xy 157.15 111.25) + (xy 155.35 111.25) + (xy 155.35 111.15) + (xy 155.15 111.15) + (xy 155.15 111.05) + (xy 155.05 111.05) + (xy 155.05 110.95) + (xy 154.95 110.95) + (xy 154.95 110.85) + (xy 154.85 110.85) + (xy 154.85 110.75) + (xy 154.75 110.75) + (xy 154.75 110.65) + (xy 154.65 110.65) + (xy 154.65 110.55) + (xy 154.55 110.55) + (xy 154.55 110.45) + (xy 154.45 110.45) + (xy 154.45 110.35) + (xy 154.35 110.35) + (xy 154.35 110.25) + (xy 154.25 110.25) + (xy 154.25 110.15) + (xy 154.15 110.15) + (xy 154.15 110.05) + (xy 154.05 110.05) + (xy 154.05 109.95) + (xy 153.95 109.95) + (xy 153.95 109.85) + (xy 153.85 109.85) + (xy 153.85 109.75) + (xy 153.75 109.75) + (xy 153.75 109.65) + (xy 153.65 109.65) + (xy 153.65 109.55) + (xy 153.55 109.55) + (xy 153.55 109.45) + (xy 153.45 109.45) + (xy 153.45 109.35) + (xy 153.35 109.35) + (xy 153.35 109.25) + (xy 153.25 109.25) + (xy 153.25 109.15) + (xy 153.15 109.15) + (xy 153.15 109.05) + (xy 153.05 109.05) + (xy 153.05 108.95) + (xy 152.95 108.95) + (xy 152.95 108.85) + (xy 152.85 108.85) + (xy 152.85 108.75) + (xy 152.75 108.75) + (xy 152.75 108.65) + (xy 152.65 108.65) + (xy 152.65 108.55) + (xy 152.55 108.55) + (xy 152.55 108.45) + (xy 152.45 108.45) + (xy 152.45 108.35) + (xy 152.35 108.35) + (xy 152.35 108.25) + (xy 152.25 108.25) + (xy 152.25 108.15) + (xy 152.15 108.15) + (xy 152.15 108.05) + (xy 152.05 108.05) + (xy 152.05 107.95) + (xy 151.95 107.95) + (xy 151.95 107.85) + (xy 151.85 107.85) + (xy 151.85 107.75) + (xy 151.75 107.75) + (xy 151.75 107.65) + (xy 151.65 107.65) + (xy 151.65 107.55) + (xy 151.55 107.55) + (xy 151.55 107.45) + (xy 151.45 107.45) + (xy 151.45 107.35) + (xy 151.35 107.35) + (xy 151.35 107.25) + (xy 151.25 107.25) + (xy 151.25 107.15) + (xy 151.15 107.15) + (xy 151.15 107.05) + (xy 151.05 107.05) + (xy 151.05 106.95) + (xy 150.95 106.95) + (xy 150.95 106.85) + (xy 150.85 106.85) + (xy 150.85 106.75) + (xy 150.75 106.75) + (xy 150.75 106.65) + (xy 150.65 106.65) + (xy 150.65 106.55) + (xy 150.55 106.55) + (xy 150.55 106.45) + (xy 150.45 106.45) + (xy 150.45 106.35) + (xy 150.35 106.35) + (xy 150.35 106.25) + (xy 150.25 106.25) + (xy 150.25 106.15) + (xy 150.15 106.15) + (xy 150.15 106.05) + (xy 150.05 106.05) + (xy 150.05 105.95) + (xy 149.95 105.95) + (xy 149.95 105.85) + (xy 149.85 105.85) + (xy 149.85 105.75) + (xy 149.75 105.75) + (xy 149.75 105.65) + (xy 149.65 105.65) + (xy 149.65 105.55) + (xy 149.55 105.55) + (xy 149.55 105.45) + (xy 149.45 105.45) + (xy 149.45 105.35) + (xy 149.35 105.35) + (xy 149.35 105.25) + (xy 149.25 105.25) + (xy 149.25 105.15) + (xy 149.15 105.15) + (xy 149.15 105.05) + (xy 149.05 105.05) + (xy 149.05 104.95) + (xy 148.95 104.95) + (xy 148.95 104.85) + (xy 148.85 104.85) + (xy 148.85 104.75) + (xy 148.75 104.75) + (xy 148.75 104.65) + (xy 148.65 104.65) + (xy 148.65 104.55) + (xy 148.55 104.55) + (xy 148.55 104.45) + (xy 148.45 104.45) + (xy 148.45 104.35) + (xy 148.35 104.35) + (xy 148.35 104.25) + (xy 148.25 104.25) + (xy 148.25 104.15) + (xy 148.15 104.15) + (xy 148.15 104.05) + (xy 148.05 104.05) + (xy 148.05 103.95) + (xy 147.95 103.95) + (xy 147.95 103.85) + (xy 147.85 103.85) + (xy 147.85 103.75) + (xy 147.75 103.75) + (xy 147.75 103.65) + (xy 147.65 103.65) + (xy 147.65 103.55) + (xy 147.55 103.55) + (xy 147.55 103.45) + (xy 147.45 103.45) + (xy 147.45 103.35) + (xy 147.35 103.35) + (xy 147.35 103.25) + (xy 147.25 103.25) + (xy 147.25 103.15) + (xy 147.15 103.15) + (xy 147.15 103.05) + (xy 147.05 103.05) + (xy 147.05 102.95) + (xy 146.85 102.95) + (xy 146.85 103.05) + (xy 145.95 103.05) + (xy 145.95 102.95) + (xy 145.75 102.95) + (xy 145.75 102.85) + (xy 145.65 102.85) + (xy 145.65 102.75) + (xy 145.55 102.75) + (xy 145.55 102.65) + (xy 145.45 102.65) + (xy 145.45 102.55) + (xy 145.35 102.55) + (xy 145.35 102.35) + (xy 145.25 102.35) + (xy 145.25 101.45) + (xy 145.35 101.45) + (xy 145.35 101.25) + (xy 145.45 101.25) + (xy 145.45 101.15) + (xy 145.55 101.15) + (xy 145.55 101.05) + (xy 145.65 101.05) + (xy 145.65 100.95) + (xy 145.75 100.95) + (xy 145.75 100.85) + (xy 145.85 100.85) + (xy 145.85 100.75) + (xy 145.75 100.75) + (xy 145.75 100.65) + (xy 145.65 100.65) + (xy 145.65 100.55) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 157.35 100.55) + (xy 157.35 100.65) + (xy 157.25 100.65) + (xy 157.25 100.75) + (xy 157.15 100.75) + (xy 157.15 100.85) + (xy 157.25 100.85) + (xy 157.25 100.95) + (xy 157.35 100.95) + (xy 157.35 101.05) + (xy 157.45 101.05) + (xy 157.45 101.15) + (xy 157.55 101.15) + (xy 157.55 101.35) + (xy 157.65 101.35) + (xy 157.65 101.55) + (xy 157.75 101.55) + (xy 157.75 102.25) + (xy 157.65 102.25) + (xy 157.65 102.45) + (xy 157.75 102.45) + (xy 157.75 102.55) + (xy 157.85 102.55) + (xy 157.85 102.65) + (xy 174.95 102.65) + (xy 174.95 102.55) + (xy 175.05 102.55) + (xy 175.05 102.45) + (xy 175.15 102.45) + (xy 175.15 102.35) + (xy 175.25 102.35) + (xy 175.25 102.25) + (xy 175.35 102.25) + (xy 175.35 102.15) + (xy 177.65 102.15) + (xy 177.65 102.25) + (xy 177.75 102.25) + (xy 177.75 102.35) + (xy 177.85 102.35) + (xy 177.85 104.45) + (xy 177.75 104.45) + (xy 177.75 104.55) + (xy 177.65 104.55) + (xy 177.65 104.65) + (xy 177.55 104.65) + (xy 177.55 104.75) + (xy 177.45 104.75) + (xy 177.45 104.85) + (xy 177.35 104.85) + (xy 177.35 104.95) + (xy 177.45 104.95) + (xy 177.45 105.05) + (xy 177.55 105.05) + (xy 177.55 105.15) + (xy 177.65 105.15) + (xy 177.65 105.35) + (xy 177.75 105.35) + (xy 177.75 105.55) + (xy 177.85 105.55) + (xy 177.85 106.25) + (xy 177.75 106.25) + (xy 177.75 106.45) + (xy 177.65 106.45) + (xy 177.65 106.65) + (xy 177.55 106.65) + (xy 177.55 106.75) + (xy 177.45 106.75) + (xy 177.45 106.85) + (xy 177.35 106.85) + (xy 177.35 106.95) + (xy 177.25 106.95) + (xy 177.25 107.05) + (xy 177.15 107.05) + (xy 177.15 107.25) + (xy 177.25 107.25) + (xy 177.25 107.35) + (xy 177.35 107.35) + (xy 177.35 107.45) + (xy 177.45 107.45) + (xy 177.45 107.55) + (xy 177.55 107.55) + (xy 177.55 107.65) + (xy 177.65 107.65) + (xy 177.65 107.85) + (xy 177.75 107.85) + (xy 177.75 108.05) + (xy 177.85 108.05) + (xy 177.85 108.75) + (xy 177.75 108.75) + (xy 177.75 108.95) + (xy 177.65 108.95) + (xy 177.65 109.15) + (xy 177.55 109.15) + (xy 177.55 109.25) + (xy 177.45 109.25) + (xy 177.45 109.35) + (xy 177.35 109.35) + (xy 177.35 109.45) + (xy 177.25 109.45) + (xy 177.25 109.55) + (xy 177.15 109.55) + (xy 177.15 109.75) + (xy 177.25 109.75) + (xy 177.25 109.85) + (xy 177.35 109.85) + (xy 177.35 109.95) + (xy 177.45 109.95) + (xy 177.45 110.05) + (xy 177.55 110.05) + (xy 177.55 110.15) + (xy 177.65 110.15) + (xy 177.65 110.35) + (xy 177.75 110.35) + (xy 177.75 110.55) + (xy 177.85 110.55) + (xy 177.85 111.25) + (xy 177.75 111.25) + (xy 177.75 111.45) + (xy 177.65 111.45) + (xy 177.65 111.65) + (xy 177.55 111.65) + (xy 177.55 111.75) + (xy 177.45 111.75) + (xy 177.45 111.85) + (xy 177.35 111.85) + (xy 177.35 111.95) + (xy 177.15 111.95) + (xy 177.15 112.05) + (xy 176.85 112.05) + (xy 176.85 112.15) + (xy 176.15 112.15) + (xy 176.15 112.05) + (xy 175.85 112.05) + (xy 175.85 111.95) + (xy 175.65 111.95) + (xy 175.65 111.85) + (xy 175.55 111.85) + (xy 175.55 111.75) + (xy 175.45 111.75) + (xy 175.45 111.65) + (xy 175.35 111.65) + (xy 175.35 111.45) + (xy 175.25 111.45) + (xy 175.25 111.35) + (xy 175.15 111.35) + (xy 175.15 111.25) + (xy 159.05 111.25) + (xy 159.05 111.35) + (xy 158.95 111.35) + (xy 158.95 111.45) + (xy 158.85 111.45) + (xy 158.85 111.55) + (xy 158.95 111.55) + (xy 158.95 111.65) + (xy 159.05 111.65) + (xy 159.05 111.75) + (xy 159.15 111.75) + (xy 159.15 111.85) + (xy 159.25 111.85) + (xy 159.25 111.95) + (xy 159.35 111.95) + (xy 159.35 112.05) + (xy 159.45 112.05) + (xy 159.45 112.15) + (xy 159.55 112.15) + (xy 159.55 112.25) + (xy 159.65 112.25) + (xy 159.65 112.35) + (xy 159.75 112.35) + (xy 159.75 112.45) + (xy 159.85 112.45) + (xy 159.85 112.55) + (xy 159.95 112.55) + (xy 159.95 112.65) + (xy 160.05 112.65) + (xy 160.05 112.75) + (xy 160.15 112.75) + (xy 160.15 112.85) + (xy 160.25 112.85) + (xy 160.25 112.95) + (xy 160.35 112.95) + (xy 160.35 113.05) + (xy 160.45 113.05) + (xy 160.45 113.15) + (xy 160.55 113.15) + (xy 160.55 113.25) + (xy 160.65 113.25) + (xy 160.65 113.35) + (xy 160.75 113.35) + (xy 160.75 113.45) + (xy 160.85 113.45) + (xy 160.85 113.55) + (xy 160.95 113.55) + (xy 160.95 113.65) + (xy 161.05 113.65) + (xy 161.05 113.75) + (xy 161.15 113.75) + (xy 161.15 113.85) + (xy 161.25 113.85) + (xy 161.25 113.95) + (xy 161.35 113.95) + (xy 161.35 114.05) + (xy 161.45 114.05) + (xy 161.45 114.15) + (xy 161.55 114.15) + (xy 161.55 114.25) + (xy 161.65 114.25) + (xy 161.65 114.35) + (xy 161.75 114.35) + (xy 161.75 114.45) + (xy 161.85 114.45) + (xy 161.85 114.55) + (xy 161.95 114.55) + (xy 161.95 114.65) + (xy 162.05 114.65) + (xy 162.05 114.75) + (xy 162.15 114.75) + (xy 162.15 114.85) + (xy 162.25 114.85) + (xy 162.25 114.95) + (xy 162.35 114.95) + (xy 162.35 115.05) + (xy 162.45 115.05) + (xy 162.45 115.15) + (xy 162.55 115.15) + (xy 162.55 115.25) + (xy 162.65 115.25) + (xy 162.65 115.35) + (xy 162.75 115.35) + (xy 162.75 115.45) + (xy 162.85 115.45) + (xy 162.85 115.55) + (xy 162.95 115.55) + (xy 162.95 115.65) + (xy 163.05 115.65) + (xy 163.05 115.75) + (xy 163.15 115.75) + (xy 163.15 115.85) + (xy 163.25 115.85) + (xy 163.25 115.95) + (xy 163.35 115.95) + (xy 163.35 116.05) + (xy 163.45 116.05) + (xy 163.45 116.15) + (xy 163.55 116.15) + (xy 163.55 116.25) + (xy 163.65 116.25) + (xy 163.65 116.35) + (xy 163.75 116.35) + (xy 163.75 116.45) + (xy 163.85 116.45) + (xy 163.85 116.55) + (xy 163.95 116.55) + (xy 163.95 116.65) + (xy 164.05 116.65) + (xy 164.05 116.75) + (xy 164.15 116.75) + (xy 164.15 116.85) + (xy 164.25 116.85) + (xy 164.25 116.95) + (xy 164.35 116.95) + (xy 164.35 117.05) + (xy 164.45 117.05) + (xy 164.45 117.15) + (xy 175.85 117.15) + (xy 175.85 117.25) + (xy 177.65 117.25) + (xy 177.65 117.35) + (xy 177.75 117.35) + (xy 177.75 117.45) + (xy 177.85 117.45) + (xy 177.85 119.55) + (xy 177.75 119.55) + (xy 177.75 119.65) + (xy 177.65 119.65) + (xy 177.65 119.75) + (xy 177.55 119.75) + (xy 177.55 119.85) + (xy 177.45 119.85) + (xy 177.45 119.95) + (xy 177.35 119.95) + (xy 177.35 120.05) + (xy 177.45 120.05) + (xy 177.45 120.15) + (xy 177.55 120.15) + (xy 177.55 120.25) + (xy 177.65 120.25) + (xy 177.65 120.45) + (xy 177.75 120.45) + (xy 177.75 120.65) + (xy 177.85 120.65) + (xy 177.85 121.35) + (xy 177.75 121.35) + (xy 177.75 121.55) + (xy 177.65 121.55) + (xy 177.65 121.75) + (xy 177.55 121.75) + (xy 177.55 121.85) + (xy 177.45 121.85) + (xy 177.45 121.95) + (xy 177.35 121.95) + (xy 177.35 122.05) + (xy 177.15 122.05) + (xy 177.15 122.15) + (xy 176.85 122.15) + (xy 176.85 122.25) + (xy 176.15 122.25) + (xy 176.15 122.15) + (xy 175.85 122.15) + (xy 175.85 122.05) + (xy 175.65 122.05) + (xy 175.65 121.95) + (xy 175.55 121.95) + (xy 175.55 121.85) + (xy 175.45 121.85) + (xy 175.45 121.75) + (xy 175.35 121.75) + (xy 175.35 121.55) + (xy 175.25 121.55) + (xy 175.25 121.35) + (xy 175.15 121.35) + (xy 175.15 120.85) + (xy 175.05 120.85) + (xy 175.05 120.75) + (xy 174.95 120.75) + (xy 174.95 120.65) + (xy 174.85 120.65) + (xy 174.85 120.55) + (xy 174.75 120.55) + (xy 174.75 120.45) + (xy 174.65 120.45) + (xy 174.65 120.35) + (xy 174.55 120.35) + (xy 174.55 120.25) + (xy 161.25 120.25) + (xy 161.25 120.35) + (xy 161.15 120.35) + (xy 161.15 120.45) + (xy 161.05 120.45) + (xy 161.05 121.35) + (xy 160.95 121.35) + (xy 160.95 121.45) + (xy 160.85 121.45) + (xy 160.85 121.55) + (xy 160.45 121.55) + (xy 160.45 121.65) + (xy 160.35 121.65) + (xy 160.35 121.75) + (xy 160.25 121.75) + (xy 160.25 122.45) + (xy 160.35 122.45) + (xy 160.35 122.55) + (xy 160.45 122.55) + (xy 160.45 123.25) + (xy 160.35 123.25) + (xy 160.35 123.35) + (xy 160.25 123.35) + (xy 160.25 123.45) + (xy 160.15 123.45) + (xy 160.15 123.65) + (xy 160.25 123.65) + (xy 160.25 123.75) + (xy 160.35 123.75) + (xy 160.35 123.85) + (xy 160.45 123.85) + (xy 160.45 123.95) + (xy 160.55 123.95) + (xy 160.55 124.05) + (xy 160.65 124.05) + (xy 160.65 124.15) + (xy 160.75 124.15) + (xy 160.75 124.25) + (xy 160.85 124.25) + (xy 160.85 124.35) + (xy 160.95 124.35) + (xy 160.95 124.45) + (xy 161.05 124.45) + (xy 161.05 124.55) + (xy 161.15 124.55) + (xy 161.15 124.65) + (xy 161.25 124.65) + (xy 161.25 124.75) + (xy 161.35 124.75) + (xy 161.35 124.85) + (xy 161.45 124.85) + (xy 161.45 124.95) + (xy 161.55 124.95) + (xy 161.55 125.05) + (xy 161.65 125.05) + (xy 161.65 125.15) + (xy 161.75 125.15) + (xy 161.75 125.25) + (xy 161.85 125.25) + (xy 161.85 125.35) + (xy 161.95 125.35) + (xy 161.95 125.45) + (xy 162.05 125.45) + (xy 162.05 125.55) + (xy 162.15 125.55) + (xy 162.15 125.65) + (xy 162.25 125.65) + (xy 162.25 125.75) + (xy 162.35 125.75) + (xy 162.35 125.85) + (xy 162.45 125.85) + (xy 162.45 125.95) + (xy 162.55 125.95) + (xy 162.55 126.05) + (xy 162.65 126.05) + (xy 162.65 126.15) + (xy 162.75 126.15) + (xy 162.75 126.25) + (xy 162.85 126.25) + (xy 162.85 126.35) + (xy 162.95 126.35) + (xy 162.95 126.45) + (xy 163.05 126.45) + (xy 163.05 126.55) + (xy 163.15 126.55) + (xy 163.15 126.65) + (xy 163.25 126.65) + (xy 163.25 126.75) + (xy 163.35 126.75) + (xy 163.35 126.85) + (xy 163.45 126.85) + (xy 163.45 126.95) + (xy 171.25 126.95) + (xy 171.25 126.85) + (xy 171.35 126.85) + (xy 171.35 126.75) + (xy 172.05 126.75) + (xy 172.05 126.85) + (xy 172.15 126.85) + (xy 172.15 126.95) + (xy 172.25 126.95) + (xy 172.25 127.05) + (xy 172.35 127.05) + (xy 172.35 127.45) + (xy 172.45 127.45) + (xy 172.45 127.55) + (xy 172.55 127.55) + (xy 172.55 127.65) + (xy 175.25 127.65) + (xy 175.25 127.75) + (xy 175.45 127.75) + (xy 175.45 127.85) + (xy 175.55 127.85) + (xy 175.55 127.95) + (xy 175.65 127.95) + (xy 175.65 128.05) + (xy 175.75 128.05) + (xy 175.75 128.15) + (xy 175.85 128.15) + (xy 175.85 128.25) + (xy 175.95 128.25) + (xy 175.95 128.35) + (xy 177.65 128.35) + (xy 177.65 128.45) + (xy 177.75 128.45) + (xy 177.75 128.55) + (xy 177.85 128.55) + (xy 177.85 130.65) + (xy 177.75 130.65) + (xy 177.75 130.75) + (xy 177.65 130.75) + (xy 177.65 130.85) + (xy 177.55 130.85) + (xy 177.55 130.95) + (xy 177.45 130.95) + (xy 177.45 131.05) + (xy 177.35 131.05) + (xy 177.35 131.15) + (xy 177.45 131.15) + (xy 177.45 131.25) + (xy 177.55 131.25) + (xy 177.55 131.35) + (xy 177.65 131.35) + (xy 177.65 131.55) + (xy 177.75 131.55) + (xy 177.75 131.75) + (xy 177.85 131.75) + (xy 177.85 132.45) + (xy 177.75 132.45) + (xy 177.75 132.65) + (xy 177.65 132.65) + (xy 177.65 132.85) + (xy 177.55 132.85) + (xy 177.55 132.95) + (xy 177.45 132.95) + (xy 177.45 133.05) + (xy 177.35 133.05) + (xy 177.35 133.15) + (xy 177.15 133.15) + (xy 177.15 133.25) + (xy 176.85 133.25) + (xy 176.85 133.35) + (xy 176.15 133.35) + (xy 176.15 133.25) + (xy 175.85 133.25) + (xy 175.85 133.15) + (xy 175.75 133.15) + (xy 175.75 133.25) + (xy 175.65 133.25) + (xy 175.65 133.35) + (xy 175.55 133.35) + (xy 175.55 138.95) + (xy 175.65 138.95) + (xy 175.65 139.05) + (xy 175.75 139.05) + (xy 175.75 139.15) + (xy 175.85 139.15) + (xy 175.85 139.25) + (xy 175.95 139.25) + (xy 175.95 139.35) + (xy 176.05 139.35) + (xy 176.05 139.45) + (xy 177.65 139.45) + (xy 177.65 139.55) + (xy 177.75 139.55) + (xy 177.75 139.65) + (xy 177.85 139.65) + (xy 177.85 141.75) + (xy 177.75 141.75) + (xy 177.75 141.85) + (xy 177.65 141.85) + (xy 177.65 141.95) + (xy 177.55 141.95) + (xy 177.55 142.05) + (xy 177.45 142.05) + (xy 177.45 142.15) + (xy 177.35 142.15) + (xy 177.35 142.25) + (xy 177.45 142.25) + (xy 177.45 142.35) + (xy 177.55 142.35) + (xy 177.55 142.45) + (xy 177.65 142.45) + (xy 177.65 142.65) + (xy 177.75 142.65) + (xy 177.75 142.85) + (xy 177.85 142.85) + (xy 177.85 143.55) + (xy 177.75 143.55) + (xy 177.75 143.75) + (xy 177.65 143.75) + (xy 177.65 143.95) + (xy 177.55 143.95) + (xy 177.55 144.05) + (xy 177.45 144.05) + (xy 177.45 144.15) + (xy 177.35 144.15) + (xy 177.35 144.25) + (xy 177.15 144.25) + (xy 177.15 144.35) + (xy 176.85 144.35) + (xy 176.85 144.45) + (xy 176.15 144.45) + (xy 176.15 144.35) + (xy 175.85 144.35) + (xy 175.85 144.25) + (xy 175.65 144.25) + (xy 175.65 144.15) + (xy 175.55 144.15) + (xy 175.55 144.05) + (xy 175.45 144.05) + (xy 175.45 143.95) + (xy 175.35 143.95) + (xy 175.35 143.75) + (xy 175.25 143.75) + (xy 175.25 143.55) + (xy 175.15 143.55) + (xy 175.15 142.85) + (xy 175.25 142.85) + (xy 175.25 142.65) + (xy 175.35 142.65) + (xy 175.35 142.55) + (xy 175.25 142.55) + (xy 175.25 142.45) + (xy 175.15 142.45) + (xy 175.15 142.35) + (xy 175.05 142.35) + (xy 175.05 142.25) + (xy 174.95 142.25) + (xy 174.95 142.15) + (xy 174.85 142.15) + (xy 174.85 142.05) + (xy 174.75 142.05) + (xy 174.75 141.95) + (xy 174.65 141.95) + (xy 174.65 141.85) + (xy 174.55 141.85) + (xy 174.55 141.75) + (xy 174.45 141.75) + (xy 174.45 141.65) + (xy 174.35 141.65) + (xy 174.35 141.55) + (xy 174.25 141.55) + (xy 174.25 141.45) + (xy 174.15 141.45) + (xy 174.15 141.35) + (xy 174.05 141.35) + (xy 174.05 141.25) + (xy 173.95 141.25) + (xy 173.95 133.65) + (xy 173.85 133.65) + (xy 173.85 133.55) + (xy 173.75 133.55) + (xy 173.75 133.45) + (xy 173.65 133.45) + (xy 173.65 133.35) + (xy 173.55 133.35) + (xy 173.55 133.25) + (xy 173.45 133.25) + (xy 173.45 133.15) + (xy 173.35 133.15) + (xy 173.35 133.05) + (xy 173.25 133.05) + (xy 173.25 132.95) + (xy 173.15 132.95) + (xy 173.15 132.85) + (xy 173.05 132.85) + (xy 173.05 132.75) + (xy 172.95 132.75) + (xy 172.95 132.65) + (xy 172.85 132.65) + (xy 172.85 132.55) + (xy 172.75 132.55) + (xy 172.75 132.45) + (xy 172.65 132.45) + (xy 172.65 132.35) + (xy 172.55 132.35) + (xy 172.55 132.25) + (xy 172.45 132.25) + (xy 172.45 132.15) + (xy 172.35 132.15) + (xy 172.35 132.05) + (xy 172.25 132.05) + (xy 172.25 131.95) + (xy 172.15 131.95) + (xy 172.15 131.85) + (xy 172.05 131.85) + (xy 172.05 131.75) + (xy 171.95 131.75) + (xy 171.95 131.65) + (xy 171.85 131.65) + (xy 171.85 131.55) + (xy 171.75 131.55) + (xy 171.75 131.45) + (xy 171.65 131.45) + (xy 171.65 131.35) + (xy 171.55 131.35) + (xy 171.55 131.25) + (xy 171.45 131.25) + (xy 171.45 131.15) + (xy 171.35 131.15) + (xy 171.35 131.05) + (xy 171.25 131.05) + (xy 171.25 130.95) + (xy 171.15 130.95) + (xy 171.15 130.85) + (xy 171.05 130.85) + (xy 171.05 130.95) + (xy 170.95 130.95) + (xy 170.95 131.05) + (xy 170.85 131.05) + (xy 170.85 131.45) + (xy 170.75 131.45) + (xy 170.75 131.55) + (xy 170.55 131.55) + (xy 170.55 131.65) + (xy 169.45 131.65) + (xy 169.45 131.55) + (xy 169.25 131.55) + (xy 169.25 131.45) + (xy 169.15 131.45) + (xy 169.15 131.35) + (xy 169.05 131.35) + (xy 169.05 131.25) + (xy 167.75 131.25) + (xy 167.75 131.35) + (xy 167.65 131.35) + (xy 167.65 131.45) + (xy 167.55 131.45) + (xy 167.55 131.55) + (xy 167.45 131.55) + (xy 167.45 131.65) + (xy 165.85 131.65) + (xy 165.85 131.55) + (xy 165.65 131.55) + (xy 165.65 131.35) + (xy 165.55 131.35) + (xy 165.55 130.75) + (xy 165.45 130.75) + (xy 165.45 130.65) + (xy 165.35 130.65) + (xy 165.35 130.55) + (xy 165.25 130.55) + (xy 165.25 130.65) + (xy 163.75 130.65) + (xy 163.75 130.75) + (xy 163.65 130.75) + (xy 163.65 130.85) + (xy 163.55 130.85) + (xy 163.55 130.95) + (xy 163.45 130.95) + (xy 163.45 131.05) + (xy 163.35 131.05) + (xy 163.35 131.15) + (xy 163.25 131.15) + (xy 163.25 131.25) + (xy 163.15 131.25) + (xy 163.15 131.35) + (xy 163.05 131.35) + (xy 163.05 131.45) + (xy 162.95 131.45) + (xy 162.95 131.55) + (xy 162.85 131.55) + (xy 162.85 131.65) + (xy 162.75 131.65) + (xy 162.75 131.75) + (xy 162.65 131.75) + (xy 162.65 131.85) + (xy 162.55 131.85) + (xy 162.55 131.95) + (xy 162.45 131.95) + (xy 162.45 132.05) + (xy 162.35 132.05) + (xy 162.35 132.15) + (xy 162.25 132.15) + (xy 162.25 132.25) + (xy 162.15 132.25) + (xy 162.15 132.35) + (xy 162.05 132.35) + (xy 162.05 132.45) + (xy 161.95 132.45) + (xy 161.95 132.55) + (xy 161.85 132.55) + (xy 161.85 132.65) + (xy 161.75 132.65) + (xy 161.75 132.75) + (xy 161.65 132.75) + (xy 161.65 132.85) + (xy 161.55 132.85) + (xy 161.55 132.95) + (xy 161.45 132.95) + (xy 161.45 133.05) + (xy 161.35 133.05) + (xy 161.35 133.15) + (xy 161.25 133.15) + (xy 161.25 133.25) + (xy 161.15 133.25) + (xy 161.15 133.35) + (xy 161.05 133.35) + (xy 161.05 133.45) + (xy 160.95 133.45) + (xy 160.95 133.55) + (xy 160.85 133.55) + (xy 160.85 133.65) + (xy 160.75 133.65) + (xy 160.75 133.75) + (xy 160.65 133.75) + (xy 160.65 133.85) + (xy 160.55 133.85) + (xy 160.55 133.95) + (xy 160.45 133.95) + (xy 160.45 134.05) + (xy 160.35 134.05) + (xy 160.35 134.15) + (xy 160.25 134.15) + (xy 160.25 134.25) + (xy 160.15 134.25) + (xy 160.15 134.35) + (xy 160.05 134.35) + (xy 160.05 134.45) + (xy 159.95 134.45) + (xy 159.95 134.55) + (xy 159.85 134.55) + (xy 159.85 134.65) + (xy 159.75 134.65) + (xy 159.75 135.05) + (xy 159.65 135.05) + (xy 159.65 135.15) + (xy 159.55 135.15) + (xy 159.55 135.25) + (xy 159.45 135.25) + (xy 159.45 135.35) + (xy 159.05 135.35) + (xy 159.05 135.45) + (xy 158.95 135.45) + (xy 158.95 135.55) + (xy 158.85 135.55) + (xy 158.85 139.35) + (xy 158.95 139.35) + (xy 158.95 139.45) + (xy 159.05 139.45) + (xy 159.05 139.55) + (xy 160.45 139.55) + (xy 160.45 139.65) + (xy 160.65 139.65) + (xy 160.65 139.85) + (xy 160.75 139.85) + (xy 160.75 140.15) + (xy 160.85 140.15) + (xy 160.85 140.25) + (xy 160.95 140.25) + (xy 160.95 140.35) + (xy 163.95 140.35) + (xy 163.95 140.45) + (xy 164.15 140.45) + (xy 164.15 140.65) + (xy 164.25 140.65) + (xy 164.25 140.75) + (xy 164.35 140.75) + (xy 164.35 140.85) + (xy 164.45 140.85) + (xy 164.45 140.95) + (xy 167.55 140.95) + (xy 167.55 140.85) + (xy 167.65 140.85) + (xy 167.65 140.75) + (xy 167.75 140.75) + (xy 167.75 139.45) + (xy 167.85 139.45) + (xy 167.85 139.35) + (xy 167.95 139.35) + (xy 167.95 139.25) + (xy 170.35 139.25) + (xy 170.35 139.35) + (xy 170.45 139.35) + (xy 170.45 139.45) + (xy 170.55 139.45) + (xy 170.55 143.15) + (xy 170.65 143.15) + (xy 170.65 144.35) + (xy 170.75 144.35) + (xy 170.75 144.45) + (xy 170.85 144.45) + (xy 170.85 144.55) + (xy 170.95 144.55) + (xy 170.95 144.65) + (xy 171.05 144.65) + (xy 171.05 144.75) + (xy 171.15 144.75) + (xy 171.15 144.85) + (xy 171.25 144.85) + (xy 171.25 144.95) + (xy 171.35 144.95) + (xy 171.35 145.05) + (xy 171.45 145.05) + (xy 171.45 145.15) + (xy 171.55 145.15) + (xy 171.55 145.25) + (xy 171.65 145.25) + (xy 171.65 145.35) + (xy 171.75 145.35) + (xy 171.75 145.45) + (xy 171.85 145.45) + (xy 171.85 145.55) + (xy 171.95 145.55) + (xy 171.95 145.65) + (xy 172.05 145.65) + (xy 172.05 145.75) + (xy 172.15 145.75) + (xy 172.15 145.85) + (xy 172.25 145.85) + (xy 172.25 145.95) + (xy 172.35 145.95) + (xy 172.35 146.05) + (xy 172.45 146.05) + (xy 172.45 146.15) + (xy 172.55 146.15) + (xy 172.55 146.25) + (xy 172.65 146.25) + (xy 172.65 146.35) + (xy 172.75 146.35) + (xy 172.75 146.45) + (xy 172.85 146.45) + (xy 172.85 146.55) + (xy 172.95 146.55) + (xy 172.95 146.65) + (xy 173.05 146.65) + (xy 173.05 146.75) + (xy 173.15 146.75) + (xy 173.15 146.85) + (xy 173.25 146.85) + (xy 173.25 146.95) + (xy 173.35 146.95) + (xy 173.35 147.05) + (xy 173.45 147.05) + (xy 173.45 147.15) + (xy 173.55 147.15) + (xy 173.55 147.25) + (xy 173.65 147.25) + (xy 173.65 147.35) + (xy 173.75 147.35) + (xy 173.75 147.45) + (xy 173.85 147.45) + (xy 173.85 147.55) + (xy 173.95 147.55) + (xy 173.95 147.65) + (xy 174.05 147.65) + (xy 174.05 147.75) + (xy 174.15 147.75) + (xy 174.15 147.85) + (xy 174.25 147.85) + (xy 174.25 147.95) + (xy 174.35 147.95) + (xy 174.35 148.05) + (xy 174.45 148.05) + (xy 174.45 148.15) + (xy 174.55 148.15) + (xy 174.55 148.25) + (xy 174.65 148.25) + (xy 174.65 148.35) + (xy 174.75 148.35) + (xy 174.75 148.45) + (xy 174.85 148.45) + (xy 174.85 148.55) + (xy 174.95 148.55) + (xy 174.95 148.65) + (xy 175.05 148.65) + (xy 175.05 148.75) + (xy 175.15 148.75) + (xy 175.15 148.85) + (xy 175.25 148.85) + (xy 175.25 148.95) + (xy 175.35 148.95) + (xy 175.35 149.05) + (xy 175.45 149.05) + (xy 175.45 149.15) + (xy 175.55 149.15) + (xy 175.55 149.25) + (xy 175.65 149.25) + (xy 175.65 149.35) + (xy 175.75 149.35) + (xy 175.75 149.45) + (xy 175.85 149.45) + (xy 175.85 149.55) + (xy 175.95 149.55) + (xy 175.95 149.65) + (xy 176.05 149.65) + (xy 176.05 149.75) + (xy 176.15 149.75) + (xy 176.15 149.85) + (xy 176.25 149.85) + (xy 176.25 149.95) + (xy 176.35 149.95) + (xy 176.35 150.05) + (xy 176.45 150.05) + (xy 176.45 150.15) + (xy 176.55 150.15) + (xy 176.55 150.25) + (xy 176.65 150.25) + (xy 176.65 150.35) + (xy 176.75 150.35) + (xy 176.75 150.45) + (xy 176.85 150.45) + (xy 176.85 150.55) + (xy 176.95 150.55) + (xy 176.95 150.65) + (xy 177.05 150.65) + (xy 177.05 150.75) + (xy 178.45 150.75) + (xy 178.45 150.85) + (xy 178.65 150.85) + (xy 178.65 151.05) + (xy 178.75 151.05) + (xy 178.75 152.95) + (xy 178.65 152.95) + (xy 178.65 153.15) + (xy 178.45 153.15) + (xy 178.45 153.25) + (xy 178.35 153.25) + (xy 178.35 153.35) + (xy 178.25 153.35) + (xy 178.25 153.45) + (xy 178.15 153.45) + (xy 178.15 153.55) + (xy 178.25 153.55) + (xy 178.25 153.65) + (xy 178.35 153.65) + (xy 178.35 153.75) + (xy 178.45 153.75) + (xy 178.45 153.85) + (xy 178.55 153.85) + (xy 178.55 153.95) + (xy 178.65 153.95) + (xy 178.65 154.25) + (xy 178.75 154.25) + (xy 178.75 154.85) + (xy 178.65 154.85) + (xy 178.65 155.05) + (xy 178.55 155.05) + (xy 178.55 155.25) + (xy 178.45 155.25) + (xy 178.45 155.35) + (xy 178.35 155.35) + (xy 178.35 155.45) + (xy 178.25 155.45) + (xy 178.25 155.55) + (xy 178.15 155.55) + (xy 178.15 155.65) + (xy 178.05 155.65) + (xy 178.05 155.75) + (xy 177.95 155.75) + (xy 177.95 155.85) + (xy 178.05 155.85) + (xy 178.05 155.95) + (xy 178.15 155.95) + (xy 178.15 156.05) + (xy 178.25 156.05) + (xy 178.25 156.15) + (xy 178.35 156.15) + (xy 178.35 156.25) + (xy 178.45 156.25) + (xy 178.45 156.35) + (xy 178.55 156.35) + (xy 178.55 156.55) + (xy 178.65 156.55) + (xy 178.65 156.85) + (xy 178.75 156.85) + (xy 178.75 157.35) + (xy 178.65 157.35) + (xy 178.65 157.65) + (xy 178.55 157.65) + (xy 178.55 157.75) + (xy 178.45 157.75) + (xy 178.45 157.95) + (xy 178.35 157.95) + (xy 178.35 158.05) + (xy 178.15 158.05) + (xy 178.15 158.15) + (xy 178.05 158.15) + (xy 178.05 158.25) + (xy 177.65 158.25) + (xy 177.65 158.35) + (xy 177.35 158.35) + (xy 177.35 158.25) + (xy 176.95 158.25) + (xy 176.95 158.15) + (xy 176.85 158.15) + (xy 176.85 158.05) + (xy 176.65 158.05) + (xy 176.65 157.95) + (xy 176.55 157.95) + (xy 176.55 157.75) + (xy 176.45 157.75) + (xy 176.45 157.65) + (xy 176.35 157.65) + (xy 176.35 157.35) + (xy 176.25 157.35) + (xy 176.25 156.95) + (xy 176.15 156.95) + (xy 176.15 156.85) + (xy 176.05 156.85) + (xy 176.05 156.75) + (xy 175.95 156.75) + (xy 175.95 156.65) + (xy 175.85 156.65) + (xy 175.85 156.55) + (xy 175.75 156.55) + (xy 175.75 156.45) + (xy 175.65 156.45) + (xy 175.65 156.35) + (xy 175.55 156.35) + (xy 175.55 156.25) + (xy 175.45 156.25) + (xy 175.45 156.15) + (xy 175.35 156.15) + (xy 175.35 156.05) + (xy 175.25 156.05) + (xy 175.25 155.95) + (xy 175.15 155.95) + (xy 175.15 155.85) + (xy 175.05 155.85) + (xy 175.05 155.75) + (xy 174.95 155.75) + (xy 174.95 155.65) + (xy 174.85 155.65) + (xy 174.85 155.55) + (xy 174.75 155.55) + (xy 174.75 155.45) + (xy 164.45 155.45) + (xy 164.45 155.55) + (xy 164.35 155.55) + (xy 164.35 155.65) + (xy 163.65 155.65) + (xy 163.65 155.55) + (xy 163.55 155.55) + (xy 163.55 155.45) + (xy 163.45 155.45) + (xy 163.45 155.35) + (xy 163.35 155.35) + (xy 163.35 154.95) + (xy 163.25 154.95) + (xy 163.25 154.85) + (xy 163.15 154.85) + (xy 163.15 154.75) + (xy 161.55 154.75) + (xy 161.55 154.65) + (xy 161.45 154.65) + (xy 161.45 154.55) + (xy 161.35 154.55) + (xy 161.35 154.45) + (xy 161.25 154.45) + (xy 161.25 154.35) + (xy 161.15 154.35) + (xy 161.15 154.25) + (xy 161.05 154.25) + (xy 161.05 154.15) + (xy 160.95 154.15) + (xy 160.95 154.05) + (xy 160.85 154.05) + (xy 160.85 153.95) + (xy 160.75 153.95) + (xy 160.75 153.85) + (xy 160.65 153.85) + (xy 160.65 153.75) + (xy 160.55 153.75) + (xy 160.55 153.65) + (xy 160.45 153.65) + (xy 160.45 153.55) + (xy 160.35 153.55) + (xy 160.35 153.45) + (xy 160.25 153.45) + (xy 160.25 153.35) + (xy 160.15 153.35) + (xy 160.15 153.25) + (xy 160.05 153.25) + (xy 160.05 153.15) + (xy 159.95 153.15) + (xy 159.95 153.05) + (xy 159.85 153.05) + (xy 159.85 152.95) + (xy 159.75 152.95) + (xy 159.75 152.85) + (xy 159.65 152.85) + (xy 159.65 152.75) + (xy 159.55 152.75) + (xy 159.55 152.65) + (xy 159.45 152.65) + (xy 159.45 152.55) + (xy 159.35 152.55) + (xy 159.35 152.45) + (xy 159.25 152.45) + (xy 159.25 152.35) + (xy 159.15 152.35) + (xy 159.15 152.25) + (xy 159.05 152.25) + (xy 159.05 152.15) + (xy 158.95 152.15) + (xy 158.95 152.05) + (xy 158.85 152.05) + (xy 158.85 151.95) + (xy 158.75 151.95) + (xy 158.75 151.85) + (xy 158.65 151.85) + (xy 158.65 151.75) + (xy 158.55 151.75) + (xy 158.55 151.65) + (xy 158.45 151.65) + (xy 158.45 151.55) + (xy 158.35 151.55) + (xy 158.35 151.45) + (xy 158.25 151.45) + (xy 158.25 151.35) + (xy 158.15 151.35) + (xy 158.15 151.25) + (xy 158.05 151.25) + (xy 158.05 151.15) + (xy 157.95 151.15) + (xy 157.95 151.05) + (xy 157.85 151.05) + (xy 157.85 150.95) + (xy 157.75 150.95) + (xy 157.75 150.85) + (xy 157.65 150.85) + (xy 157.65 150.75) + (xy 157.55 150.75) + (xy 157.55 150.65) + (xy 157.45 150.65) + (xy 157.45 150.55) + (xy 157.35 150.55) + (xy 157.35 150.45) + (xy 157.25 150.45) + (xy 157.25 150.35) + (xy 157.15 150.35) + (xy 157.15 150.25) + (xy 157.05 150.25) + (xy 157.05 150.15) + (xy 156.95 150.15) + (xy 156.95 150.05) + (xy 156.85 150.05) + (xy 156.85 149.95) + (xy 156.75 149.95) + (xy 156.75 149.85) + (xy 156.65 149.85) + (xy 156.65 149.75) + (xy 156.55 149.75) + (xy 156.55 149.65) + (xy 156.45 149.65) + (xy 156.45 149.55) + (xy 156.35 149.55) + (xy 156.35 149.45) + (xy 156.25 149.45) + (xy 156.25 149.35) + (xy 156.15 149.35) + (xy 156.15 149.25) + (xy 156.05 149.25) + (xy 156.05 149.15) + (xy 155.95 149.15) + (xy 155.95 149.05) + (xy 155.85 149.05) + (xy 155.85 148.95) + (xy 155.75 148.95) + (xy 155.75 148.85) + (xy 155.65 148.85) + (xy 155.65 148.75) + (xy 155.55 148.75) + (xy 155.55 148.65) + (xy 155.45 148.65) + (xy 155.45 148.55) + (xy 155.35 148.55) + (xy 155.35 148.45) + (xy 155.25 148.45) + (xy 155.25 148.35) + (xy 155.15 148.35) + (xy 155.15 148.25) + (xy 155.05 148.25) + (xy 155.05 148.15) + (xy 154.95 148.15) + (xy 154.95 148.05) + (xy 154.85 148.05) + (xy 154.85 148.15) + (xy 154.75 148.15) + (xy 154.75 148.25) + (xy 154.65 148.25) + (xy 154.65 149.65) + (xy 154.75 149.65) + (xy 154.75 149.95) + (xy 154.85 149.95) + (xy 154.85 150.05) + (xy 154.95 150.05) + (xy 154.95 150.15) + (xy 156.05 150.15) + (xy 156.05 150.25) + (xy 156.15 150.25) + (xy 156.15 150.45) + (xy 156.25 150.45) + (xy 156.25 151.55) + (xy 156.15 151.55) + (xy 156.15 151.75) + (xy 156.05 151.75) + (xy 156.05 151.85) + (xy 155.25 151.85) + (xy 155.25 151.95) + (xy 155.15 151.95) + (xy 155.15 152.05) + (xy 155.05 152.05) + (xy 155.05 152.15) + (xy 154.95 152.15) + (xy 154.95 152.25) + (xy 154.85 152.25) + (xy 154.85 152.35) + (xy 154.75 152.35) + (xy 154.75 152.45) + (xy 154.65 152.45) + (xy 154.65 153.35) + (xy 154.55 153.35) + (xy 154.55 153.45) + (xy 154.45 153.45) + (xy 154.45 153.55) + (xy 154.05 153.55) + (xy 154.05 153.65) + (xy 153.95 153.65) + (xy 153.95 153.75) + (xy 153.85 153.75) + (xy 153.85 154.05) + (xy 153.95 154.05) + (xy 153.95 154.15) + (xy 154.05 154.15) + (xy 154.05 154.25) + (xy 154.15 154.25) + (xy 154.15 154.35) + (xy 154.25 154.35) + (xy 154.25 154.45) + (xy 154.35 154.45) + (xy 154.35 154.55) + (xy 154.45 154.55) + (xy 154.45 154.65) + (xy 154.55 154.65) + (xy 154.55 154.75) + (xy 154.65 154.75) + (xy 154.65 154.85) + (xy 154.75 154.85) + (xy 154.75 154.95) + (xy 156.35 154.95) + (xy 156.35 154.85) + (xy 156.45 154.85) + (xy 156.45 154.75) + (xy 156.65 154.75) + (xy 156.65 154.65) + (xy 158.35 154.65) + (xy 158.35 154.75) + (xy 158.55 154.75) + (xy 158.55 154.95) + (xy 158.65 154.95) + (xy 158.65 156.15) + (xy 158.55 156.15) + (xy 158.55 156.35) + (xy 158.45 156.35) + (xy 158.45 156.45) + (xy 158.55 156.45) + (xy 158.55 156.55) + (xy 158.65 156.55) + (xy 158.65 156.65) + (xy 167.45 156.65) + (xy 167.45 162.55) + (xy 167.55 162.55) + (xy 167.55 162.65) + (xy 167.65 162.65) + (xy 167.65 162.75) + (xy 179.25 162.75) + (xy 179.25 162.65) + (xy 179.35 162.65) + (xy 179.35 162.55) + (xy 179.45 162.55) + (xy 179.45 122.45) + (xy 168.05 122.45) + (xy 168.05 123.05) + (xy 167.95 123.05) + (xy 167.95 123.45) + (xy 167.85 123.45) + (xy 167.85 123.65) + (xy 167.75 123.65) + (xy 167.75 123.85) + (xy 167.65 123.85) + (xy 167.65 123.95) + (xy 167.55 123.95) + (xy 167.55 124.15) + (xy 167.45 124.15) + (xy 167.45 124.25) + (xy 167.35 124.25) + (xy 167.35 124.35) + (xy 167.15 124.35) + (xy 167.15 124.45) + (xy 167.05 124.45) + (xy 167.05 124.55) + (xy 166.85 124.55) + (xy 166.85 124.65) + (xy 166.55 124.65) + (xy 166.55 124.75) + (xy 165.55 124.75) + (xy 165.55 124.65) + (xy 165.25 124.65) + (xy 165.25 124.55) + (xy 165.05 124.55) + (xy 165.05 124.45) + (xy 164.95 124.45) + (xy 164.95 124.35) + (xy 164.75 124.35) + (xy 164.75 124.25) + (xy 164.65 124.25) + (xy 164.65 124.15) + (xy 164.55 124.15) + (xy 164.55 124.05) + (xy 164.45 124.05) + (xy 164.45 123.85) + (xy 164.35 123.85) + (xy 164.35 123.75) + (xy 164.25 123.75) + (xy 164.25 123.55) + (xy 164.15 123.55) + (xy 164.15 123.15) + (xy 164.05 123.15) + (xy 164.05 122.35) + (xy 164.15 122.35) + (xy 164.15 122.05) + (xy 164.25 122.05) + (xy 164.25 121.85) + (xy 164.35 121.85) + (xy 164.35 121.65) + (xy 164.45 121.65) + (xy 164.45 121.55) + (xy 164.55 121.55) + (xy 164.55 121.45) + (xy 164.65 121.45) + (xy 164.65 121.35) + (xy 164.75 121.35) + (xy 164.75 121.25) + (xy 164.85 121.25) + (xy 164.85 121.15) + (xy 164.95 121.15) + (xy 164.95 121.05) + (xy 165.15 121.05) + (xy 165.15 120.95) + (xy 165.45 120.95) + (xy 165.45 120.85) + (xy 166.65 120.85) + (xy 166.65 120.95) + (xy 166.95 120.95) + (xy 166.95 121.05) + (xy 167.05 121.05) + (xy 167.05 121.15) + (xy 167.25 121.15) + (xy 167.25 121.25) + (xy 167.35 121.25) + (xy 167.35 121.35) + (xy 167.45 121.35) + (xy 167.45 121.45) + (xy 167.55 121.45) + (xy 167.55 121.55) + (xy 167.65 121.55) + (xy 167.65 121.75) + (xy 167.75 121.75) + (xy 167.75 121.85) + (xy 167.85 121.85) + (xy 167.85 122.15) + (xy 167.95 122.15) + (xy 167.95 122.45) + (xy 168.05 122.45) + (xy 179.45 122.45) + (xy 179.45 100.75) + (xy 179.35 100.75) + (xy 179.35 100.65) + (xy 179.25 100.65) + (xy 179.25 100.55) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 151.95 102.95) + (xy 151.95 103.05) + (xy 151.85 103.05) + (xy 151.85 103.15) + (xy 151.75 103.15) + (xy 151.75 103.35) + (xy 151.85 103.35) + (xy 151.85 103.45) + (xy 151.95 103.45) + (xy 151.95 103.55) + (xy 152.05 103.55) + (xy 152.05 103.65) + (xy 152.15 103.65) + (xy 152.15 103.75) + (xy 152.25 103.75) + (xy 152.25 103.85) + (xy 152.35 103.85) + (xy 152.35 103.95) + (xy 152.45 103.95) + (xy 152.45 104.05) + (xy 152.55 104.05) + (xy 152.55 104.15) + (xy 152.65 104.15) + (xy 152.65 104.25) + (xy 152.75 104.25) + (xy 152.75 104.35) + (xy 152.85 104.35) + (xy 152.85 104.45) + (xy 152.95 104.45) + (xy 152.95 104.55) + (xy 153.05 104.55) + (xy 153.05 104.65) + (xy 153.15 104.65) + (xy 153.15 104.75) + (xy 153.25 104.75) + (xy 153.25 104.85) + (xy 153.35 104.85) + (xy 153.35 104.95) + (xy 153.45 104.95) + (xy 153.45 105.05) + (xy 153.55 105.05) + (xy 153.55 105.15) + (xy 153.65 105.15) + (xy 153.65 105.25) + (xy 153.75 105.25) + (xy 153.75 105.35) + (xy 153.85 105.35) + (xy 153.85 105.45) + (xy 153.95 105.45) + (xy 153.95 105.55) + (xy 154.05 105.55) + (xy 154.05 105.65) + (xy 154.15 105.65) + (xy 154.15 105.75) + (xy 154.25 105.75) + (xy 154.25 105.85) + (xy 154.35 105.85) + (xy 154.35 105.95) + (xy 154.45 105.95) + (xy 154.45 106.05) + (xy 154.55 106.05) + (xy 154.55 106.15) + (xy 154.65 106.15) + (xy 154.65 106.25) + (xy 154.75 106.25) + (xy 154.75 106.35) + (xy 154.85 106.35) + (xy 154.85 106.45) + (xy 154.95 106.45) + (xy 154.95 106.55) + (xy 155.05 106.55) + (xy 155.05 106.65) + (xy 155.15 106.65) + (xy 155.15 106.75) + (xy 155.25 106.75) + (xy 155.25 106.85) + (xy 155.35 106.85) + (xy 155.35 106.95) + (xy 155.45 106.95) + (xy 155.45 107.05) + (xy 155.55 107.05) + (xy 155.55 107.15) + (xy 155.65 107.15) + (xy 155.65 107.25) + (xy 155.75 107.25) + (xy 155.75 107.35) + (xy 155.85 107.35) + (xy 155.85 107.45) + (xy 175.65 107.45) + (xy 175.65 107.35) + (xy 175.75 107.35) + (xy 175.75 107.25) + (xy 175.85 107.25) + (xy 175.85 107.05) + (xy 175.75 107.05) + (xy 175.75 106.95) + (xy 175.65 106.95) + (xy 175.65 106.85) + (xy 175.55 106.85) + (xy 175.55 106.75) + (xy 175.45 106.75) + (xy 175.45 106.65) + (xy 175.35 106.65) + (xy 175.35 106.45) + (xy 175.25 106.45) + (xy 175.25 106.35) + (xy 175.15 106.35) + (xy 175.15 106.25) + (xy 157.85 106.25) + (xy 157.85 106.15) + (xy 157.65 106.15) + (xy 157.65 106.05) + (xy 157.55 106.05) + (xy 157.55 105.95) + (xy 157.45 105.95) + (xy 157.45 105.85) + (xy 157.35 105.85) + (xy 157.35 105.75) + (xy 157.25 105.75) + (xy 157.25 105.65) + (xy 157.15 105.65) + (xy 157.15 105.55) + (xy 157.05 105.55) + (xy 157.05 105.45) + (xy 156.95 105.45) + (xy 156.95 105.35) + (xy 156.85 105.35) + (xy 156.85 105.25) + (xy 156.75 105.25) + (xy 156.75 105.15) + (xy 156.65 105.15) + (xy 156.65 105.05) + (xy 156.55 105.05) + (xy 156.55 104.95) + (xy 156.45 104.95) + (xy 156.45 104.85) + (xy 156.25 104.85) + (xy 156.25 104.75) + (xy 156.15 104.75) + (xy 156.15 104.65) + (xy 156.05 104.65) + (xy 156.05 104.55) + (xy 155.95 104.55) + (xy 155.95 104.15) + (xy 155.85 104.15) + (xy 155.85 104.05) + (xy 155.75 104.05) + (xy 155.75 103.95) + (xy 153.15 103.95) + (xy 153.15 103.85) + (xy 152.95 103.85) + (xy 152.95 103.75) + (xy 152.85 103.75) + (xy 152.85 103.65) + (xy 152.75 103.65) + (xy 152.75 103.55) + (xy 152.65 103.55) + (xy 152.65 103.45) + (xy 152.55 103.45) + (xy 152.55 103.35) + (xy 152.45 103.35) + (xy 152.45 103.25) + (xy 152.35 103.25) + (xy 152.35 103.15) + (xy 152.25 103.15) + (xy 152.25 103.05) + (xy 152.15 103.05) + (xy 152.15 102.95) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 160.35 114.85) + (xy 160.35 114.95) + (xy 160.25 114.95) + (xy 160.25 115.05) + (xy 160.15 115.05) + (xy 160.15 115.25) + (xy 160.05 115.25) + (xy 160.05 115.35) + (xy 159.95 115.35) + (xy 159.95 115.45) + (xy 159.85 115.45) + (xy 159.85 115.55) + (xy 159.75 115.55) + (xy 159.75 115.65) + (xy 159.55 115.65) + (xy 159.55 115.75) + (xy 158.65 115.75) + (xy 158.65 115.65) + (xy 158.45 115.65) + (xy 158.45 115.55) + (xy 158.35 115.55) + (xy 158.35 115.45) + (xy 158.25 115.45) + (xy 158.25 115.35) + (xy 158.15 115.35) + (xy 158.15 115.25) + (xy 158.05 115.25) + (xy 158.05 115.15) + (xy 157.95 115.15) + (xy 157.95 115.05) + (xy 157.85 115.05) + (xy 157.85 114.95) + (xy 157.75 114.95) + (xy 157.75 115.05) + (xy 157.65 115.05) + (xy 157.65 115.15) + (xy 157.55 115.15) + (xy 157.55 115.35) + (xy 157.45 115.35) + (xy 157.45 115.45) + (xy 157.35 115.45) + (xy 157.35 115.55) + (xy 157.15 115.55) + (xy 157.15 115.65) + (xy 156.95 115.65) + (xy 156.95 115.75) + (xy 156.15 115.75) + (xy 156.15 115.65) + (xy 155.95 115.65) + (xy 155.95 115.55) + (xy 155.75 115.55) + (xy 155.75 115.45) + (xy 155.65 115.45) + (xy 155.65 115.25) + (xy 155.55 115.25) + (xy 155.55 115.15) + (xy 155.45 115.15) + (xy 155.45 115.05) + (xy 155.35 115.05) + (xy 155.35 114.95) + (xy 155.25 114.95) + (xy 155.25 115.05) + (xy 155.15 115.05) + (xy 155.15 115.15) + (xy 155.05 115.15) + (xy 155.05 115.25) + (xy 154.95 115.25) + (xy 154.95 115.35) + (xy 154.85 115.35) + (xy 154.85 115.45) + (xy 154.75 115.45) + (xy 154.75 115.55) + (xy 154.65 115.55) + (xy 154.65 115.65) + (xy 154.45 115.65) + (xy 154.45 115.75) + (xy 154.25 115.75) + (xy 154.25 115.85) + (xy 154.15 115.85) + (xy 154.15 115.95) + (xy 154.05 115.95) + (xy 154.05 117.45) + (xy 154.15 117.45) + (xy 154.15 117.55) + (xy 154.25 117.55) + (xy 154.25 117.65) + (xy 155.45 117.65) + (xy 155.45 117.75) + (xy 155.55 117.75) + (xy 155.55 117.85) + (xy 155.65 117.85) + (xy 155.65 117.95) + (xy 155.85 117.95) + (xy 155.85 117.85) + (xy 155.95 117.85) + (xy 155.95 117.75) + (xy 156.05 117.75) + (xy 156.05 117.65) + (xy 156.65 117.65) + (xy 156.65 117.55) + (xy 156.75 117.55) + (xy 156.75 117.45) + (xy 156.85 117.45) + (xy 156.85 117.25) + (xy 156.95 117.25) + (xy 156.95 117.15) + (xy 157.05 117.15) + (xy 157.05 117.05) + (xy 157.15 117.05) + (xy 157.15 116.95) + (xy 157.85 116.95) + (xy 157.85 117.05) + (xy 157.95 117.05) + (xy 157.95 117.15) + (xy 158.05 117.15) + (xy 158.05 117.25) + (xy 158.15 117.25) + (xy 158.15 117.45) + (xy 158.25 117.45) + (xy 158.25 117.55) + (xy 158.35 117.55) + (xy 158.35 117.65) + (xy 158.95 117.65) + (xy 158.95 117.75) + (xy 159.05 117.75) + (xy 159.05 117.85) + (xy 159.15 117.85) + (xy 159.15 117.95) + (xy 159.35 117.95) + (xy 159.35 117.85) + (xy 159.45 117.85) + (xy 159.45 117.75) + (xy 159.55 117.75) + (xy 159.55 117.65) + (xy 160.85 117.65) + (xy 160.85 117.75) + (xy 160.95 117.75) + (xy 160.95 117.85) + (xy 161.05 117.85) + (xy 161.05 119.15) + (xy 161.15 119.15) + (xy 161.15 119.25) + (xy 161.25 119.25) + (xy 161.25 119.35) + (xy 174.95 119.35) + (xy 174.95 119.25) + (xy 175.05 119.25) + (xy 175.05 119.15) + (xy 175.15 119.15) + (xy 175.15 118.45) + (xy 175.05 118.45) + (xy 175.05 118.35) + (xy 174.95 118.35) + (xy 174.95 118.25) + (xy 163.95 118.25) + (xy 163.95 118.15) + (xy 163.75 118.15) + (xy 163.75 118.05) + (xy 163.65 118.05) + (xy 163.65 117.95) + (xy 163.55 117.95) + (xy 163.55 117.85) + (xy 163.45 117.85) + (xy 163.45 117.75) + (xy 163.35 117.75) + (xy 163.35 117.65) + (xy 163.25 117.65) + (xy 163.25 117.55) + (xy 163.15 117.55) + (xy 163.15 117.45) + (xy 163.05 117.45) + (xy 163.05 117.35) + (xy 162.95 117.35) + (xy 162.95 117.25) + (xy 162.85 117.25) + (xy 162.85 117.15) + (xy 162.75 117.15) + (xy 162.75 117.05) + (xy 162.65 117.05) + (xy 162.65 116.95) + (xy 162.55 116.95) + (xy 162.55 116.85) + (xy 162.45 116.85) + (xy 162.45 116.75) + (xy 162.35 116.75) + (xy 162.35 116.65) + (xy 162.25 116.65) + (xy 162.25 116.55) + (xy 162.15 116.55) + (xy 162.15 116.45) + (xy 162.05 116.45) + (xy 162.05 116.35) + (xy 161.95 116.35) + (xy 161.95 116.25) + (xy 161.85 116.25) + (xy 161.85 116.15) + (xy 161.75 116.15) + (xy 161.75 116.05) + (xy 161.65 116.05) + (xy 161.65 115.95) + (xy 161.55 115.95) + (xy 161.55 115.85) + (xy 161.45 115.85) + (xy 161.45 115.75) + (xy 161.35 115.75) + (xy 161.35 115.65) + (xy 161.25 115.65) + (xy 161.25 115.55) + (xy 161.15 115.55) + (xy 161.15 115.45) + (xy 161.05 115.45) + (xy 161.05 115.35) + (xy 160.95 115.35) + (xy 160.95 115.25) + (xy 160.85 115.25) + (xy 160.85 115.15) + (xy 160.75 115.15) + (xy 160.75 115.05) + (xy 160.65 115.05) + (xy 160.65 114.95) + (xy 160.55 114.95) + (xy 160.55 114.85) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 142.65 114.95) + (xy 142.55 114.95) + (xy 142.55 115.05) + (xy 142.45 115.05) + (xy 142.45 115.15) + (xy 142.35 115.15) + (xy 142.35 115.35) + (xy 142.45 115.35) + (xy 142.45 115.45) + (xy 142.55 115.45) + (xy 142.55 115.55) + (xy 142.65 115.55) + (xy 142.65 115.65) + (xy 142.75 115.65) + (xy 142.75 115.75) + (xy 142.85 115.75) + (xy 142.85 115.85) + (xy 142.95 115.85) + (xy 142.95 115.95) + (xy 143.05 115.95) + (xy 143.05 116.05) + (xy 143.15 116.05) + (xy 143.15 116.15) + (xy 143.25 116.15) + (xy 143.25 116.25) + (xy 143.35 116.25) + (xy 143.35 116.35) + (xy 143.45 116.35) + (xy 143.45 116.45) + (xy 143.55 116.45) + (xy 143.55 116.55) + (xy 143.65 116.55) + (xy 143.65 116.65) + (xy 143.75 116.65) + (xy 143.75 116.75) + (xy 143.85 116.75) + (xy 143.85 116.85) + (xy 143.95 116.85) + (xy 143.95 116.95) + (xy 144.05 116.95) + (xy 144.05 117.05) + (xy 144.15 117.05) + (xy 144.15 117.15) + (xy 144.25 117.15) + (xy 144.25 117.25) + (xy 144.35 117.25) + (xy 144.35 117.35) + (xy 144.45 117.35) + (xy 144.45 117.45) + (xy 144.55 117.45) + (xy 144.55 117.55) + (xy 144.65 117.55) + (xy 144.65 117.65) + (xy 144.75 117.65) + (xy 144.75 117.75) + (xy 144.85 117.75) + (xy 144.85 117.85) + (xy 144.95 117.85) + (xy 144.95 117.95) + (xy 145.05 117.95) + (xy 145.05 118.05) + (xy 145.15 118.05) + (xy 145.15 118.15) + (xy 145.25 118.15) + (xy 145.25 118.25) + (xy 145.35 118.25) + (xy 145.35 118.35) + (xy 145.45 118.35) + (xy 145.45 118.45) + (xy 145.55 118.45) + (xy 145.55 118.55) + (xy 145.65 118.55) + (xy 145.65 118.65) + (xy 145.75 118.65) + (xy 145.75 118.75) + (xy 145.85 118.75) + (xy 145.85 118.85) + (xy 145.95 118.85) + (xy 145.95 118.95) + (xy 146.05 118.95) + (xy 146.05 119.05) + (xy 146.15 119.05) + (xy 146.15 119.15) + (xy 146.25 119.15) + (xy 146.25 119.25) + (xy 146.35 119.25) + (xy 146.35 119.35) + (xy 146.45 119.35) + (xy 146.45 119.45) + (xy 146.55 119.45) + (xy 146.55 126.05) + (xy 146.65 126.05) + (xy 146.65 126.15) + (xy 146.75 126.15) + (xy 146.75 126.25) + (xy 146.85 126.25) + (xy 146.85 126.15) + (xy 146.95 126.15) + (xy 146.95 126.05) + (xy 147.05 126.05) + (xy 147.05 125.95) + (xy 147.15 125.95) + (xy 147.15 125.85) + (xy 147.25 125.85) + (xy 147.25 125.75) + (xy 147.35 125.75) + (xy 147.35 125.65) + (xy 147.45 125.65) + (xy 147.45 125.55) + (xy 147.55 125.55) + (xy 147.55 125.45) + (xy 147.65 125.45) + (xy 147.65 125.35) + (xy 147.75 125.35) + (xy 147.75 125.25) + (xy 147.85 125.25) + (xy 147.85 125.15) + (xy 147.95 125.15) + (xy 147.95 125.05) + (xy 148.05 125.05) + (xy 148.05 124.95) + (xy 148.15 124.95) + (xy 148.15 124.85) + (xy 148.25 124.85) + (xy 148.25 124.75) + (xy 148.35 124.75) + (xy 148.35 124.65) + (xy 148.45 124.65) + (xy 148.45 124.55) + (xy 148.55 124.55) + (xy 148.55 124.45) + (xy 148.65 124.45) + (xy 148.65 124.35) + (xy 148.75 124.35) + (xy 148.75 124.25) + (xy 148.85 124.25) + (xy 148.85 124.15) + (xy 148.95 124.15) + (xy 148.95 124.05) + (xy 149.05 124.05) + (xy 149.05 123.95) + (xy 149.15 123.95) + (xy 149.15 123.85) + (xy 149.25 123.85) + (xy 149.25 123.75) + (xy 149.35 123.75) + (xy 149.35 123.65) + (xy 149.45 123.65) + (xy 149.45 123.55) + (xy 149.55 123.55) + (xy 149.55 123.45) + (xy 149.65 123.45) + (xy 149.65 123.35) + (xy 149.75 123.35) + (xy 149.75 123.25) + (xy 149.85 123.25) + (xy 149.85 123.15) + (xy 149.95 123.15) + (xy 149.95 123.05) + (xy 150.05 123.05) + (xy 150.05 122.95) + (xy 150.15 122.95) + (xy 150.15 122.85) + (xy 150.25 122.85) + (xy 150.25 122.75) + (xy 150.35 122.75) + (xy 150.35 122.65) + (xy 150.45 122.65) + (xy 150.45 122.55) + (xy 150.55 122.55) + (xy 150.55 122.45) + (xy 150.65 122.45) + (xy 150.65 122.35) + (xy 150.75 122.35) + (xy 150.75 122.25) + (xy 150.85 122.25) + (xy 150.85 122.15) + (xy 150.95 122.15) + (xy 150.95 122.05) + (xy 151.05 122.05) + (xy 151.05 121.95) + (xy 151.15 121.95) + (xy 151.15 121.85) + (xy 151.25 121.85) + (xy 151.25 121.75) + (xy 151.35 121.75) + (xy 151.35 121.65) + (xy 151.45 121.65) + (xy 151.45 121.55) + (xy 151.55 121.55) + (xy 151.55 121.45) + (xy 151.65 121.45) + (xy 151.65 121.35) + (xy 151.75 121.35) + (xy 151.75 121.25) + (xy 151.85 121.25) + (xy 151.85 121.15) + (xy 151.95 121.15) + (xy 151.95 121.05) + (xy 152.05 121.05) + (xy 152.05 120.95) + (xy 152.15 120.95) + (xy 152.15 120.85) + (xy 152.25 120.85) + (xy 152.25 120.75) + (xy 152.35 120.75) + (xy 152.35 120.15) + (xy 152.45 120.15) + (xy 152.45 119.95) + (xy 152.55 119.95) + (xy 152.55 119.85) + (xy 152.65 119.85) + (xy 152.65 119.35) + (xy 152.55 119.35) + (xy 152.55 119.25) + (xy 152.45 119.25) + (xy 152.45 119.05) + (xy 152.35 119.05) + (xy 152.35 117.95) + (xy 152.45 117.95) + (xy 152.45 117.75) + (xy 152.55 117.75) + (xy 152.55 117.65) + (xy 152.75 117.65) + (xy 152.75 117.55) + (xy 152.85 117.55) + (xy 152.85 117.45) + (xy 152.95 117.45) + (xy 152.95 115.35) + (xy 152.85 115.35) + (xy 152.85 115.25) + (xy 152.75 115.25) + (xy 152.75 115.15) + (xy 152.55 115.15) + (xy 152.55 115.25) + (xy 152.45 115.25) + (xy 152.45 115.35) + (xy 152.35 115.35) + (xy 152.35 115.45) + (xy 152.25 115.45) + (xy 152.25 115.55) + (xy 152.15 115.55) + (xy 152.15 115.65) + (xy 151.95 115.65) + (xy 151.95 115.75) + (xy 151.05 115.75) + (xy 151.05 115.65) + (xy 150.85 115.65) + (xy 150.85 115.55) + (xy 150.75 115.55) + (xy 150.75 115.45) + (xy 150.65 115.45) + (xy 150.65 115.35) + (xy 150.55 115.35) + (xy 150.55 115.25) + (xy 150.45 115.25) + (xy 150.45 115.15) + (xy 150.05 115.15) + (xy 150.05 115.25) + (xy 149.95 115.25) + (xy 149.95 115.35) + (xy 149.85 115.35) + (xy 149.85 115.45) + (xy 149.75 115.45) + (xy 149.75 115.55) + (xy 149.55 115.55) + (xy 149.55 115.65) + (xy 149.35 115.65) + (xy 149.35 115.75) + (xy 148.55 115.75) + (xy 148.55 115.65) + (xy 148.35 115.65) + (xy 148.35 115.55) + (xy 148.15 115.55) + (xy 148.15 115.45) + (xy 148.05 115.45) + (xy 148.05 115.35) + (xy 147.95 115.35) + (xy 147.95 115.25) + (xy 147.85 115.25) + (xy 147.85 115.15) + (xy 147.45 115.15) + (xy 147.45 115.25) + (xy 147.35 115.25) + (xy 147.35 115.35) + (xy 147.25 115.35) + (xy 147.25 115.45) + (xy 147.15 115.45) + (xy 147.15 115.55) + (xy 147.05 115.55) + (xy 147.05 115.65) + (xy 146.85 115.65) + (xy 146.85 115.75) + (xy 145.95 115.75) + (xy 145.95 115.65) + (xy 145.75 115.65) + (xy 145.75 115.55) + (xy 145.65 115.55) + (xy 145.65 115.45) + (xy 145.55 115.45) + (xy 145.55 115.35) + (xy 145.45 115.35) + (xy 145.45 115.25) + (xy 145.35 115.25) + (xy 145.35 115.15) + (xy 144.95 115.15) + (xy 144.95 115.25) + (xy 144.85 115.25) + (xy 144.85 115.35) + (xy 144.75 115.35) + (xy 144.75 115.45) + (xy 144.65 115.45) + (xy 144.65 115.55) + (xy 144.45 115.55) + (xy 144.45 115.65) + (xy 144.25 115.65) + (xy 144.25 115.75) + (xy 143.45 115.75) + (xy 143.45 115.65) + (xy 143.25 115.65) + (xy 143.25 115.55) + (xy 143.05 115.55) + (xy 143.05 115.45) + (xy 142.95 115.45) + (xy 142.95 115.25) + (xy 142.85 115.25) + (xy 142.85 115.15) + (xy 142.75 115.15) + (xy 142.75 115.05) + (xy 142.65 115.05) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 140.65 115.65) + (xy 140.65 115.75) + (xy 140.55 115.75) + (xy 140.55 115.85) + (xy 140.45 115.85) + (xy 140.45 118.65) + (xy 140.55 118.65) + (xy 140.55 118.75) + (xy 140.65 118.75) + (xy 140.65 118.85) + (xy 140.75 118.85) + (xy 140.75 118.95) + (xy 140.85 118.95) + (xy 140.85 119.05) + (xy 140.95 119.05) + (xy 140.95 119.15) + (xy 141.05 119.15) + (xy 141.05 119.25) + (xy 141.15 119.25) + (xy 141.15 119.35) + (xy 144.15 119.35) + (xy 144.15 119.45) + (xy 144.25 119.45) + (xy 144.25 119.55) + (xy 144.35 119.55) + (xy 144.35 122.45) + (xy 144.25 122.45) + (xy 144.25 122.55) + (xy 144.15 122.55) + (xy 144.15 122.65) + (xy 140.35 122.65) + (xy 140.35 122.55) + (xy 140.25 122.55) + (xy 140.25 122.45) + (xy 140.15 122.45) + (xy 140.15 120.55) + (xy 140.05 120.55) + (xy 140.05 120.45) + (xy 139.95 120.45) + (xy 139.95 120.35) + (xy 139.85 120.35) + (xy 139.85 120.25) + (xy 139.75 120.25) + (xy 139.75 120.15) + (xy 139.65 120.15) + (xy 139.65 120.05) + (xy 139.55 120.05) + (xy 139.55 119.95) + (xy 139.45 119.95) + (xy 139.45 119.85) + (xy 139.35 119.85) + (xy 139.35 119.75) + (xy 123.65 119.75) + (xy 123.65 119.85) + (xy 123.55 119.85) + (xy 123.55 119.95) + (xy 123.45 119.95) + (xy 123.45 120.05) + (xy 123.35 120.05) + (xy 123.35 120.15) + (xy 123.25 120.15) + (xy 123.25 120.25) + (xy 123.15 120.25) + (xy 123.15 120.35) + (xy 123.05 120.35) + (xy 123.05 120.45) + (xy 122.95 120.45) + (xy 122.95 120.55) + (xy 122.85 120.55) + (xy 122.85 122.45) + (xy 122.75 122.45) + (xy 122.75 122.55) + (xy 122.65 122.55) + (xy 122.65 122.65) + (xy 119.65 122.65) + (xy 119.65 122.75) + (xy 119.55 122.75) + (xy 119.55 122.85) + (xy 119.45 122.85) + (xy 119.45 134.25) + (xy 119.35 134.25) + (xy 119.35 134.35) + (xy 119.25 134.35) + (xy 119.25 134.45) + (xy 119.15 134.45) + (xy 119.15 135.55) + (xy 119.25 135.55) + (xy 119.25 135.65) + (xy 119.35 135.65) + (xy 119.35 135.75) + (xy 119.45 135.75) + (xy 119.45 138.15) + (xy 119.55 138.15) + (xy 119.55 138.25) + (xy 119.65 138.25) + (xy 119.65 138.35) + (xy 119.85 138.35) + (xy 119.85 138.45) + (xy 119.95 138.45) + (xy 119.95 140.75) + (xy 119.85 140.75) + (xy 119.85 140.85) + (xy 118.25 140.85) + (xy 118.25 140.75) + (xy 118.15 140.75) + (xy 118.15 140.65) + (xy 118.05 140.65) + (xy 118.05 139.05) + (xy 117.95 139.05) + (xy 117.95 138.55) + (xy 117.85 138.55) + (xy 117.85 138.45) + (xy 117.75 138.45) + (xy 117.75 138.35) + (xy 117.35 138.35) + (xy 117.35 138.25) + (xy 113.55 138.25) + (xy 113.55 138.35) + (xy 113.45 138.35) + (xy 113.45 138.45) + (xy 113.35 138.45) + (xy 113.35 138.55) + (xy 113.25 138.55) + (xy 113.25 138.65) + (xy 113.15 138.65) + (xy 113.15 138.75) + (xy 113.05 138.75) + (xy 113.05 138.85) + (xy 112.95 138.85) + (xy 112.95 138.95) + (xy 112.85 138.95) + (xy 112.85 139.05) + (xy 112.75 139.05) + (xy 112.75 139.15) + (xy 112.65 139.15) + (xy 112.65 139.25) + (xy 112.55 139.25) + (xy 112.55 139.35) + (xy 112.45 139.35) + (xy 112.45 139.45) + (xy 112.35 139.45) + (xy 112.35 139.55) + (xy 112.25 139.55) + (xy 112.25 139.65) + (xy 112.15 139.65) + (xy 112.15 140.65) + (xy 112.05 140.65) + (xy 112.05 140.75) + (xy 112.15 140.75) + (xy 112.15 140.85) + (xy 112.25 140.85) + (xy 112.25 140.95) + (xy 112.65 140.95) + (xy 112.65 140.85) + (xy 112.75 140.85) + (xy 112.75 140.75) + (xy 112.85 140.75) + (xy 112.85 140.65) + (xy 112.95 140.65) + (xy 112.95 140.55) + (xy 113.05 140.55) + (xy 113.05 140.45) + (xy 113.15 140.45) + (xy 113.15 140.35) + (xy 113.25 140.35) + (xy 113.25 140.25) + (xy 113.35 140.25) + (xy 113.35 140.15) + (xy 113.45 140.15) + (xy 113.45 140.05) + (xy 113.55 140.05) + (xy 113.55 139.95) + (xy 113.65 139.95) + (xy 113.65 139.85) + (xy 113.75 139.85) + (xy 113.75 139.75) + (xy 113.85 139.75) + (xy 113.85 138.95) + (xy 113.95 138.95) + (xy 113.95 138.85) + (xy 115.35 138.85) + (xy 115.35 138.95) + (xy 115.45 138.95) + (xy 115.45 140.65) + (xy 115.35 140.65) + (xy 115.35 140.75) + (xy 114.45 140.75) + (xy 114.45 140.85) + (xy 114.35 140.85) + (xy 114.35 140.95) + (xy 114.25 140.95) + (xy 114.25 141.05) + (xy 114.15 141.05) + (xy 114.15 141.15) + (xy 114.05 141.15) + (xy 114.05 141.25) + (xy 113.95 141.25) + (xy 113.95 141.35) + (xy 113.85 141.35) + (xy 113.85 141.45) + (xy 113.75 141.45) + (xy 113.75 141.55) + (xy 113.65 141.55) + (xy 113.65 141.65) + (xy 113.55 141.65) + (xy 113.55 141.75) + (xy 113.45 141.75) + (xy 113.45 141.85) + (xy 113.35 141.85) + (xy 113.35 141.95) + (xy 113.15 141.95) + (xy 113.15 142.05) + (xy 111.65 142.05) + (xy 111.65 142.15) + (xy 111.55 142.15) + (xy 111.55 142.25) + (xy 111.45 142.25) + (xy 111.45 143.45) + (xy 111.35 143.45) + (xy 111.35 143.55) + (xy 111.45 143.55) + (xy 111.45 143.65) + (xy 111.55 143.65) + (xy 111.55 143.75) + (xy 115.65 143.75) + (xy 115.65 143.85) + (xy 115.75 143.85) + (xy 115.75 143.95) + (xy 115.85 143.95) + (xy 115.85 144.05) + (xy 115.95 144.05) + (xy 115.95 144.15) + (xy 116.05 144.15) + (xy 116.05 144.25) + (xy 116.15 144.25) + (xy 116.15 144.35) + (xy 116.25 144.35) + (xy 116.25 144.45) + (xy 116.35 144.45) + (xy 116.35 144.55) + (xy 116.45 144.55) + (xy 116.45 144.65) + (xy 116.55 144.65) + (xy 116.55 144.75) + (xy 116.65 144.75) + (xy 116.65 144.85) + (xy 116.75 144.85) + (xy 116.75 144.95) + (xy 116.85 144.95) + (xy 116.85 145.05) + (xy 116.95 145.05) + (xy 116.95 145.15) + (xy 117.05 145.15) + (xy 117.05 145.25) + (xy 117.15 145.25) + (xy 117.15 145.15) + (xy 117.25 145.15) + (xy 117.25 145.05) + (xy 117.35 145.05) + (xy 117.35 144.95) + (xy 117.45 144.95) + (xy 117.45 144.85) + (xy 117.55 144.85) + (xy 117.55 144.75) + (xy 117.65 144.75) + (xy 117.65 144.65) + (xy 118.05 144.65) + (xy 118.05 144.55) + (xy 118.15 144.55) + (xy 118.15 144.45) + (xy 118.25 144.45) + (xy 118.25 144.25) + (xy 118.15 144.25) + (xy 118.15 143.35) + (xy 118.25 143.35) + (xy 118.25 143.25) + (xy 118.35 143.25) + (xy 118.35 143.15) + (xy 120.65 143.15) + (xy 120.65 143.25) + (xy 120.85 143.25) + (xy 120.85 143.35) + (xy 120.95 143.35) + (xy 120.95 143.45) + (xy 121.35 143.45) + (xy 121.35 143.55) + (xy 121.45 143.55) + (xy 121.45 143.65) + (xy 121.55 143.65) + (xy 121.55 143.75) + (xy 121.75 143.75) + (xy 121.75 143.65) + (xy 121.85 143.65) + (xy 121.85 143.55) + (xy 121.95 143.55) + (xy 121.95 143.45) + (xy 122.05 143.45) + (xy 122.05 143.35) + (xy 122.15 143.35) + (xy 122.15 143.25) + (xy 122.25 143.25) + (xy 122.25 143.15) + (xy 122.35 143.15) + (xy 122.35 143.05) + (xy 122.45 143.05) + (xy 122.45 142.95) + (xy 122.55 142.95) + (xy 122.55 142.85) + (xy 122.65 142.85) + (xy 122.65 142.75) + (xy 122.75 142.75) + (xy 122.75 142.65) + (xy 122.85 142.65) + (xy 122.85 142.55) + (xy 122.95 142.55) + (xy 122.95 142.45) + (xy 123.05 142.45) + (xy 123.05 142.35) + (xy 123.15 142.35) + (xy 123.15 142.05) + (xy 123.25 142.05) + (xy 123.25 141.95) + (xy 123.35 141.95) + (xy 123.35 141.85) + (xy 125.55 141.85) + (xy 125.55 141.95) + (xy 125.75 141.95) + (xy 125.75 142.15) + (xy 125.85 142.15) + (xy 125.85 142.35) + (xy 125.95 142.35) + (xy 125.95 142.45) + (xy 126.05 142.45) + (xy 126.05 142.55) + (xy 126.15 142.55) + (xy 126.15 142.65) + (xy 126.25 142.65) + (xy 126.25 142.75) + (xy 126.35 142.75) + (xy 126.35 142.85) + (xy 126.85 142.85) + (xy 126.85 142.95) + (xy 127.15 142.95) + (xy 127.15 142.85) + (xy 127.25 142.85) + (xy 127.25 142.75) + (xy 127.35 142.75) + (xy 127.35 142.65) + (xy 127.45 142.65) + (xy 127.45 142.55) + (xy 127.55 142.55) + (xy 127.55 142.45) + (xy 127.65 142.45) + (xy 127.65 142.35) + (xy 127.75 142.35) + (xy 127.75 142.25) + (xy 127.85 142.25) + (xy 127.85 142.15) + (xy 127.95 142.15) + (xy 127.95 142.05) + (xy 128.05 142.05) + (xy 128.05 141.95) + (xy 128.15 141.95) + (xy 128.15 141.85) + (xy 128.25 141.85) + (xy 128.25 141.75) + (xy 128.35 141.75) + (xy 128.35 141.65) + (xy 128.45 141.65) + (xy 128.45 141.55) + (xy 128.55 141.55) + (xy 128.55 141.45) + (xy 128.65 141.45) + (xy 128.65 141.35) + (xy 128.75 141.35) + (xy 128.75 141.25) + (xy 128.85 141.25) + (xy 128.85 141.15) + (xy 128.95 141.15) + (xy 128.95 141.05) + (xy 129.05 141.05) + (xy 129.05 140.95) + (xy 129.15 140.95) + (xy 129.15 140.85) + (xy 129.25 140.85) + (xy 129.25 137.65) + (xy 129.35 137.65) + (xy 129.35 136.95) + (xy 129.45 136.95) + (xy 129.45 136.75) + (xy 129.55 136.75) + (xy 129.55 136.65) + (xy 130.25 136.65) + (xy 130.25 136.55) + (xy 130.35 136.55) + (xy 130.35 136.45) + (xy 130.45 136.45) + (xy 130.45 136.35) + (xy 130.55 136.35) + (xy 130.55 136.25) + (xy 130.65 136.25) + (xy 130.65 136.15) + (xy 130.55 136.15) + (xy 130.55 136.05) + (xy 130.45 136.05) + (xy 130.45 135.95) + (xy 129.75 135.95) + (xy 129.75 136.05) + (xy 129.65 136.05) + (xy 129.65 136.15) + (xy 129.55 136.15) + (xy 129.55 136.25) + (xy 129.45 136.25) + (xy 129.45 136.35) + (xy 129.35 136.35) + (xy 129.35 136.45) + (xy 129.25 136.45) + (xy 129.25 136.55) + (xy 129.15 136.55) + (xy 129.15 136.65) + (xy 129.05 136.65) + (xy 129.05 136.75) + (xy 128.95 136.75) + (xy 128.95 136.85) + (xy 128.85 136.85) + (xy 128.85 136.95) + (xy 128.75 136.95) + (xy 128.75 137.05) + (xy 128.65 137.05) + (xy 128.65 137.15) + (xy 128.55 137.15) + (xy 128.55 137.25) + (xy 128.45 137.25) + (xy 128.45 137.35) + (xy 128.35 137.35) + (xy 128.35 137.45) + (xy 128.25 137.45) + (xy 128.25 137.55) + (xy 128.15 137.55) + (xy 128.15 137.65) + (xy 128.05 137.65) + (xy 128.05 137.75) + (xy 127.95 137.75) + (xy 127.95 137.85) + (xy 127.85 137.85) + (xy 127.85 137.95) + (xy 127.75 137.95) + (xy 127.75 138.05) + (xy 127.65 138.05) + (xy 127.65 138.15) + (xy 127.55 138.15) + (xy 127.55 138.25) + (xy 127.45 138.25) + (xy 127.45 138.35) + (xy 127.35 138.35) + (xy 127.35 138.45) + (xy 127.25 138.45) + (xy 127.25 138.55) + (xy 127.15 138.55) + (xy 127.15 138.65) + (xy 127.05 138.65) + (xy 127.05 138.75) + (xy 126.95 138.75) + (xy 126.95 138.85) + (xy 126.85 138.85) + (xy 126.85 138.95) + (xy 126.75 138.95) + (xy 126.75 139.05) + (xy 126.65 139.05) + (xy 126.65 139.15) + (xy 126.45 139.15) + (xy 126.45 139.25) + (xy 125.65 139.25) + (xy 125.65 139.35) + (xy 125.55 139.35) + (xy 125.55 139.45) + (xy 125.45 139.45) + (xy 125.45 140.75) + (xy 125.35 140.75) + (xy 125.35 140.85) + (xy 123.75 140.85) + (xy 123.75 140.75) + (xy 123.65 140.75) + (xy 123.65 140.65) + (xy 123.55 140.65) + (xy 123.55 139.05) + (xy 123.45 139.05) + (xy 123.45 138.95) + (xy 123.35 138.95) + (xy 123.35 138.85) + (xy 123.25 138.85) + (xy 123.25 138.75) + (xy 123.15 138.75) + (xy 123.15 138.65) + (xy 123.05 138.65) + (xy 123.05 138.55) + (xy 122.95 138.55) + (xy 122.95 138.45) + (xy 122.85 138.45) + (xy 122.85 138.25) + (xy 122.75 138.25) + (xy 122.75 136.55) + (xy 122.65 136.55) + (xy 122.65 136.45) + (xy 122.55 136.45) + (xy 122.55 136.35) + (xy 122.35 136.35) + (xy 122.35 136.25) + (xy 122.25 136.25) + (xy 122.25 136.15) + (xy 122.15 136.15) + (xy 122.15 135.95) + (xy 122.05 135.95) + (xy 122.05 135.75) + (xy 121.95 135.75) + (xy 121.95 134.25) + (xy 122.05 134.25) + (xy 122.05 134.05) + (xy 122.15 134.05) + (xy 122.15 133.85) + (xy 122.25 133.85) + (xy 122.25 133.75) + (xy 122.35 133.75) + (xy 122.35 133.65) + (xy 122.55 133.65) + (xy 122.55 133.55) + (xy 122.85 133.55) + (xy 122.85 133.45) + (xy 123.35 133.45) + (xy 123.35 133.55) + (xy 123.65 133.55) + (xy 123.65 133.65) + (xy 123.75 133.65) + (xy 123.75 133.75) + (xy 123.85 133.75) + (xy 123.85 133.85) + (xy 123.95 133.85) + (xy 123.95 133.95) + (xy 124.05 133.95) + (xy 124.05 134.15) + (xy 124.15 134.15) + (xy 124.15 134.45) + (xy 124.25 134.45) + (xy 124.25 135.55) + (xy 124.15 135.55) + (xy 124.15 135.85) + (xy 124.05 135.85) + (xy 124.05 136.05) + (xy 123.95 136.05) + (xy 123.95 136.15) + (xy 123.85 136.15) + (xy 123.85 136.75) + (xy 123.95 136.75) + (xy 123.95 136.85) + (xy 124.05 136.85) + (xy 124.05 136.95) + (xy 124.15 136.95) + (xy 124.15 136.85) + (xy 124.25 136.85) + (xy 124.25 136.75) + (xy 124.35 136.75) + (xy 124.35 136.65) + (xy 124.45 136.65) + (xy 124.45 136.55) + (xy 124.55 136.55) + (xy 124.55 136.45) + (xy 124.65 136.45) + (xy 124.65 136.35) + (xy 124.75 136.35) + (xy 124.75 136.25) + (xy 124.85 136.25) + (xy 124.85 136.15) + (xy 124.95 136.15) + (xy 124.95 136.05) + (xy 125.05 136.05) + (xy 125.05 135.95) + (xy 125.15 135.95) + (xy 125.15 135.85) + (xy 125.25 135.85) + (xy 125.25 135.75) + (xy 125.35 135.75) + (xy 125.35 135.65) + (xy 125.45 135.65) + (xy 125.45 135.55) + (xy 125.55 135.55) + (xy 125.55 135.45) + (xy 125.65 135.45) + (xy 125.65 135.35) + (xy 125.75 135.35) + (xy 125.75 135.25) + (xy 125.85 135.25) + (xy 125.85 135.15) + (xy 125.95 135.15) + (xy 125.95 135.05) + (xy 126.05 135.05) + (xy 126.05 134.95) + (xy 126.15 134.95) + (xy 126.15 134.85) + (xy 126.25 134.85) + (xy 126.25 134.75) + (xy 126.35 134.75) + (xy 126.35 134.65) + (xy 126.45 134.65) + (xy 126.45 134.55) + (xy 126.55 134.55) + (xy 126.55 134.15) + (xy 126.65 134.15) + (xy 126.65 134.05) + (xy 127.35 134.05) + (xy 127.35 133.95) + (xy 127.45 133.95) + (xy 127.45 133.85) + (xy 127.55 133.85) + (xy 127.55 133.75) + (xy 127.65 133.75) + (xy 127.65 133.65) + (xy 127.75 133.65) + (xy 127.75 133.55) + (xy 127.85 133.55) + (xy 127.85 133.45) + (xy 127.95 133.45) + (xy 127.95 133.35) + (xy 128.05 133.35) + (xy 128.05 133.25) + (xy 128.15 133.25) + (xy 128.15 133.15) + (xy 128.25 133.15) + (xy 128.25 133.05) + (xy 128.35 133.05) + (xy 128.35 132.95) + (xy 128.45 132.95) + (xy 128.45 132.85) + (xy 128.55 132.85) + (xy 128.55 132.75) + (xy 128.65 132.75) + (xy 128.65 132.65) + (xy 128.75 132.65) + (xy 128.75 132.55) + (xy 128.85 132.55) + (xy 128.85 132.45) + (xy 128.95 132.45) + (xy 128.95 132.35) + (xy 129.05 132.35) + (xy 129.05 132.25) + (xy 129.15 132.25) + (xy 129.15 132.15) + (xy 129.25 132.15) + (xy 129.25 132.05) + (xy 129.35 132.05) + (xy 129.35 131.95) + (xy 129.45 131.95) + (xy 129.45 131.85) + (xy 129.55 131.85) + (xy 129.55 131.75) + (xy 129.65 131.75) + (xy 129.65 131.65) + (xy 129.75 131.65) + (xy 129.75 131.55) + (xy 129.85 131.55) + (xy 129.85 131.45) + (xy 129.95 131.45) + (xy 129.95 131.35) + (xy 130.05 131.35) + (xy 130.05 131.25) + (xy 130.15 131.25) + (xy 130.15 131.15) + (xy 130.25 131.15) + (xy 130.25 131.05) + (xy 130.45 131.05) + (xy 130.45 130.95) + (xy 133.85 130.95) + (xy 133.85 130.85) + (xy 133.95 130.85) + (xy 133.95 130.75) + (xy 134.05 130.75) + (xy 134.05 130.65) + (xy 133.95 130.65) + (xy 133.95 129.35) + (xy 134.05 129.35) + (xy 134.05 129.25) + (xy 134.15 129.25) + (xy 134.15 129.15) + (xy 135.45 129.15) + (xy 135.45 129.25) + (xy 135.55 129.25) + (xy 135.55 129.45) + (xy 135.65 129.45) + (xy 135.65 129.85) + (xy 135.75 129.85) + (xy 135.75 129.95) + (xy 135.85 129.95) + (xy 135.85 130.05) + (xy 136.05 130.05) + (xy 136.05 130.15) + (xy 136.15 130.15) + (xy 136.15 130.25) + (xy 136.25 130.25) + (xy 136.25 130.35) + (xy 136.35 130.35) + (xy 136.35 130.75) + (xy 136.45 130.75) + (xy 136.45 130.85) + (xy 136.55 130.85) + (xy 136.55 130.95) + (xy 137.85 130.95) + (xy 137.85 130.85) + (xy 137.95 130.85) + (xy 137.95 130.75) + (xy 138.05 130.75) + (xy 138.05 130.65) + (xy 137.95 130.65) + (xy 137.95 129.35) + (xy 138.05 129.35) + (xy 138.05 129.25) + (xy 138.15 129.25) + (xy 138.15 129.15) + (xy 139.45 129.15) + (xy 139.45 129.25) + (xy 139.55 129.25) + (xy 139.55 129.15) + (xy 140.25 129.15) + (xy 140.25 129.25) + (xy 140.35 129.25) + (xy 140.35 129.35) + (xy 140.45 129.35) + (xy 140.45 129.45) + (xy 140.55 129.45) + (xy 140.55 129.95) + (xy 140.65 129.95) + (xy 140.65 130.05) + (xy 140.75 130.05) + (xy 140.75 130.15) + (xy 145.75 130.15) + (xy 145.75 130.05) + (xy 145.85 130.05) + (xy 145.85 129.95) + (xy 145.95 129.95) + (xy 145.95 127.35) + (xy 145.85 127.35) + (xy 145.85 127.25) + (xy 145.75 127.25) + (xy 145.75 127.15) + (xy 145.65 127.15) + (xy 145.65 127.05) + (xy 145.55 127.05) + (xy 145.55 126.95) + (xy 145.45 126.95) + (xy 145.45 126.25) + (xy 145.55 126.25) + (xy 145.55 126.15) + (xy 145.65 126.15) + (xy 145.65 119.85) + (xy 145.55 119.85) + (xy 145.55 119.75) + (xy 145.45 119.75) + (xy 145.45 119.65) + (xy 145.35 119.65) + (xy 145.35 119.55) + (xy 145.25 119.55) + (xy 145.25 119.45) + (xy 145.15 119.45) + (xy 145.15 119.35) + (xy 145.05 119.35) + (xy 145.05 119.25) + (xy 144.95 119.25) + (xy 144.95 119.15) + (xy 144.85 119.15) + (xy 144.85 119.05) + (xy 144.75 119.05) + (xy 144.75 118.95) + (xy 144.65 118.95) + (xy 144.65 118.85) + (xy 144.55 118.85) + (xy 144.55 118.75) + (xy 144.45 118.75) + (xy 144.45 118.65) + (xy 144.35 118.65) + (xy 144.35 118.55) + (xy 144.25 118.55) + (xy 144.25 118.45) + (xy 144.15 118.45) + (xy 144.15 118.35) + (xy 144.05 118.35) + (xy 144.05 118.25) + (xy 143.95 118.25) + (xy 143.95 118.15) + (xy 143.85 118.15) + (xy 143.85 118.05) + (xy 143.75 118.05) + (xy 143.75 117.95) + (xy 143.65 117.95) + (xy 143.65 117.85) + (xy 143.55 117.85) + (xy 143.55 117.75) + (xy 143.45 117.75) + (xy 143.45 117.65) + (xy 143.35 117.65) + (xy 143.35 117.55) + (xy 143.25 117.55) + (xy 143.25 117.45) + (xy 143.15 117.45) + (xy 143.15 117.35) + (xy 143.05 117.35) + (xy 143.05 117.25) + (xy 142.95 117.25) + (xy 142.95 117.15) + (xy 142.85 117.15) + (xy 142.85 117.05) + (xy 142.75 117.05) + (xy 142.75 116.95) + (xy 142.65 116.95) + (xy 142.65 116.85) + (xy 142.55 116.85) + (xy 142.55 116.75) + (xy 142.45 116.75) + (xy 142.45 116.65) + (xy 142.35 116.65) + (xy 142.35 116.55) + (xy 142.25 116.55) + (xy 142.25 116.45) + (xy 142.15 116.45) + (xy 142.15 116.35) + (xy 142.05 116.35) + (xy 142.05 116.25) + (xy 141.95 116.25) + (xy 141.95 116.15) + (xy 141.85 116.15) + (xy 141.85 116.05) + (xy 141.75 116.05) + (xy 141.75 115.95) + (xy 141.65 115.95) + (xy 141.65 115.85) + (xy 141.55 115.85) + (xy 141.55 115.75) + (xy 140.85 115.75) + (xy 140.85 115.65) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 160.35 125.25) + (xy 160.35 125.35) + (xy 160.25 125.35) + (xy 160.25 125.45) + (xy 160.15 125.45) + (xy 160.15 125.55) + (xy 159.75 125.55) + (xy 159.75 125.65) + (xy 159.65 125.65) + (xy 159.65 125.75) + (xy 159.55 125.75) + (xy 159.55 125.85) + (xy 159.45 125.85) + (xy 159.45 125.95) + (xy 159.35 125.95) + (xy 159.35 126.05) + (xy 159.25 126.05) + (xy 159.25 126.15) + (xy 159.15 126.15) + (xy 159.15 126.25) + (xy 159.05 126.25) + (xy 159.05 126.35) + (xy 158.95 126.35) + (xy 158.95 126.45) + (xy 158.85 126.45) + (xy 158.85 126.55) + (xy 158.75 126.55) + (xy 158.75 126.65) + (xy 158.65 126.65) + (xy 158.65 126.75) + (xy 158.55 126.75) + (xy 158.55 126.85) + (xy 158.45 126.85) + (xy 158.45 126.95) + (xy 158.35 126.95) + (xy 158.35 127.05) + (xy 158.25 127.05) + (xy 158.25 127.15) + (xy 158.15 127.15) + (xy 158.15 127.25) + (xy 158.05 127.25) + (xy 158.05 127.35) + (xy 157.95 127.35) + (xy 157.95 127.45) + (xy 157.85 127.45) + (xy 157.85 127.55) + (xy 157.75 127.55) + (xy 157.75 127.65) + (xy 157.65 127.65) + (xy 157.65 127.75) + (xy 157.55 127.75) + (xy 157.55 127.85) + (xy 157.45 127.85) + (xy 157.45 127.95) + (xy 157.35 127.95) + (xy 157.35 128.05) + (xy 157.25 128.05) + (xy 157.25 128.15) + (xy 157.15 128.15) + (xy 157.15 128.25) + (xy 157.05 128.25) + (xy 157.05 128.35) + (xy 156.95 128.35) + (xy 156.95 128.45) + (xy 156.85 128.45) + (xy 156.85 128.55) + (xy 156.75 128.55) + (xy 156.75 128.65) + (xy 156.65 128.65) + (xy 156.65 128.75) + (xy 156.55 128.75) + (xy 156.55 128.85) + (xy 156.45 128.85) + (xy 156.45 128.95) + (xy 156.35 128.95) + (xy 156.35 129.05) + (xy 156.25 129.05) + (xy 156.25 129.15) + (xy 156.15 129.15) + (xy 156.15 129.25) + (xy 156.05 129.25) + (xy 156.05 129.35) + (xy 155.95 129.35) + (xy 155.95 129.45) + (xy 155.85 129.45) + (xy 155.85 129.55) + (xy 155.75 129.55) + (xy 155.75 129.65) + (xy 155.65 129.65) + (xy 155.65 129.75) + (xy 155.55 129.75) + (xy 155.55 129.85) + (xy 155.45 129.85) + (xy 155.45 129.95) + (xy 155.35 129.95) + (xy 155.35 130.05) + (xy 155.25 130.05) + (xy 155.25 130.15) + (xy 155.15 130.15) + (xy 155.15 130.25) + (xy 155.05 130.25) + (xy 155.05 130.35) + (xy 154.95 130.35) + (xy 154.95 130.45) + (xy 154.85 130.45) + (xy 154.85 130.55) + (xy 154.75 130.55) + (xy 154.75 130.65) + (xy 154.65 130.65) + (xy 154.65 130.75) + (xy 154.55 130.75) + (xy 154.55 130.85) + (xy 154.45 130.85) + (xy 154.45 130.95) + (xy 154.35 130.95) + (xy 154.35 131.05) + (xy 154.25 131.05) + (xy 154.25 131.15) + (xy 154.15 131.15) + (xy 154.15 131.25) + (xy 154.25 131.25) + (xy 154.25 131.35) + (xy 154.35 131.35) + (xy 154.35 131.45) + (xy 159.45 131.45) + (xy 159.45 131.35) + (xy 159.55 131.35) + (xy 159.55 131.25) + (xy 159.65 131.25) + (xy 159.65 131.15) + (xy 159.75 131.15) + (xy 159.75 131.05) + (xy 159.85 131.05) + (xy 159.85 130.95) + (xy 159.95 130.95) + (xy 159.95 130.85) + (xy 160.05 130.85) + (xy 160.05 130.75) + (xy 160.15 130.75) + (xy 160.15 130.15) + (xy 160.25 130.15) + (xy 160.25 130.05) + (xy 160.35 130.05) + (xy 160.35 129.95) + (xy 161.15 129.95) + (xy 161.15 129.85) + (xy 161.25 129.85) + (xy 161.25 129.75) + (xy 161.35 129.75) + (xy 161.35 129.65) + (xy 161.45 129.65) + (xy 161.45 129.55) + (xy 161.55 129.55) + (xy 161.55 129.45) + (xy 161.65 129.45) + (xy 161.65 129.35) + (xy 161.75 129.35) + (xy 161.75 129.25) + (xy 161.85 129.25) + (xy 161.85 129.15) + (xy 161.95 129.15) + (xy 161.95 129.05) + (xy 162.05 129.05) + (xy 162.05 128.95) + (xy 162.15 128.95) + (xy 162.15 128.85) + (xy 162.25 128.85) + (xy 162.25 128.75) + (xy 162.35 128.75) + (xy 162.35 128.65) + (xy 162.45 128.65) + (xy 162.45 128.55) + (xy 162.55 128.55) + (xy 162.55 128.45) + (xy 162.65 128.45) + (xy 162.65 128.25) + (xy 162.75 128.25) + (xy 162.75 128.05) + (xy 162.85 128.05) + (xy 162.85 127.95) + (xy 162.95 127.95) + (xy 162.95 127.85) + (xy 163.05 127.85) + (xy 163.05 127.75) + (xy 162.95 127.75) + (xy 162.95 127.65) + (xy 162.85 127.65) + (xy 162.85 127.55) + (xy 162.75 127.55) + (xy 162.75 127.45) + (xy 162.65 127.45) + (xy 162.65 127.35) + (xy 162.55 127.35) + (xy 162.55 127.25) + (xy 162.45 127.25) + (xy 162.45 127.15) + (xy 162.35 127.15) + (xy 162.35 127.05) + (xy 162.25 127.05) + (xy 162.25 126.95) + (xy 162.15 126.95) + (xy 162.15 126.85) + (xy 162.05 126.85) + (xy 162.05 126.75) + (xy 161.95 126.75) + (xy 161.95 126.65) + (xy 161.85 126.65) + (xy 161.85 126.55) + (xy 161.75 126.55) + (xy 161.75 126.45) + (xy 161.65 126.45) + (xy 161.65 126.35) + (xy 161.55 126.35) + (xy 161.55 126.25) + (xy 161.45 126.25) + (xy 161.45 126.15) + (xy 161.35 126.15) + (xy 161.35 126.05) + (xy 161.25 126.05) + (xy 161.25 125.95) + (xy 161.15 125.95) + (xy 161.15 125.85) + (xy 161.05 125.85) + (xy 161.05 125.75) + (xy 160.95 125.75) + (xy 160.95 125.65) + (xy 160.85 125.65) + (xy 160.85 125.55) + (xy 160.75 125.55) + (xy 160.75 125.45) + (xy 160.65 125.45) + (xy 160.65 125.35) + (xy 160.55 125.35) + (xy 160.55 125.25) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 163.85 128.75) + (xy 163.85 128.85) + (xy 163.75 128.85) + (xy 163.75 128.95) + (xy 163.65 128.95) + (xy 163.65 129.15) + (xy 163.75 129.15) + (xy 163.75 129.25) + (xy 163.85 129.25) + (xy 163.85 129.35) + (xy 165.25 129.35) + (xy 165.25 129.45) + (xy 165.35 129.45) + (xy 165.35 129.35) + (xy 165.45 129.35) + (xy 165.45 129.25) + (xy 165.55 129.25) + (xy 165.55 129.15) + (xy 165.45 129.15) + (xy 165.45 129.05) + (xy 165.35 129.05) + (xy 165.35 128.95) + (xy 165.25 128.95) + (xy 165.25 128.85) + (xy 165.15 128.85) + (xy 165.15 128.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 168.15 128.75) + (xy 168.15 128.85) + (xy 168.05 128.85) + (xy 168.05 128.95) + (xy 167.95 128.95) + (xy 167.95 129.05) + (xy 167.85 129.05) + (xy 167.85 129.15) + (xy 167.75 129.15) + (xy 167.75 129.25) + (xy 167.65 129.25) + (xy 167.65 129.55) + (xy 167.55 129.55) + (xy 167.55 129.65) + (xy 167.45 129.65) + (xy 167.45 129.75) + (xy 165.85 129.75) + (xy 165.85 129.65) + (xy 165.65 129.65) + (xy 165.65 129.75) + (xy 165.55 129.75) + (xy 165.55 129.85) + (xy 165.45 129.85) + (xy 165.45 130.15) + (xy 165.55 130.15) + (xy 165.55 130.25) + (xy 165.65 130.25) + (xy 165.65 130.35) + (xy 165.85 130.35) + (xy 165.85 130.25) + (xy 167.45 130.25) + (xy 167.45 130.35) + (xy 169.15 130.35) + (xy 169.15 130.25) + (xy 169.25 130.25) + (xy 169.25 130.15) + (xy 169.35 130.15) + (xy 169.35 130.05) + (xy 169.45 130.05) + (xy 169.45 129.95) + (xy 169.35 129.95) + (xy 169.35 129.85) + (xy 169.25 129.85) + (xy 169.25 129.75) + (xy 169.15 129.75) + (xy 169.15 128.95) + (xy 169.05 128.95) + (xy 169.05 128.85) + (xy 168.95 128.85) + (xy 168.95 128.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 147.65 132.55) + (xy 147.65 132.65) + (xy 147.55 132.65) + (xy 147.55 132.75) + (xy 147.45 132.75) + (xy 147.45 132.85) + (xy 147.55 132.85) + (xy 147.55 136.75) + (xy 147.65 136.75) + (xy 147.65 136.85) + (xy 147.75 136.85) + (xy 147.75 136.95) + (xy 148.05 136.95) + (xy 148.05 137.05) + (xy 148.15 137.05) + (xy 148.15 137.15) + (xy 148.25 137.15) + (xy 148.25 139.05) + (xy 148.15 139.05) + (xy 148.15 139.15) + (xy 148.05 139.15) + (xy 148.05 139.25) + (xy 146.85 139.25) + (xy 146.85 139.15) + (xy 146.75 139.15) + (xy 146.75 139.25) + (xy 145.65 139.25) + (xy 145.65 139.15) + (xy 145.45 139.15) + (xy 145.45 139.25) + (xy 144.35 139.25) + (xy 144.35 139.15) + (xy 144.25 139.15) + (xy 144.25 139.25) + (xy 143.05 139.25) + (xy 143.05 139.15) + (xy 142.95 139.15) + (xy 142.95 139.25) + (xy 141.75 139.25) + (xy 141.75 139.15) + (xy 141.65 139.15) + (xy 141.65 139.25) + (xy 140.55 139.25) + (xy 140.55 139.15) + (xy 140.35 139.15) + (xy 140.35 139.25) + (xy 139.25 139.25) + (xy 139.25 139.15) + (xy 139.15 139.15) + (xy 139.15 139.25) + (xy 137.95 139.25) + (xy 137.95 139.15) + (xy 137.85 139.15) + (xy 137.85 139.25) + (xy 136.75 139.25) + (xy 136.75 139.35) + (xy 136.65 139.35) + (xy 136.65 139.45) + (xy 136.55 139.45) + (xy 136.55 145.85) + (xy 136.45 145.85) + (xy 136.45 145.95) + (xy 136.35 145.95) + (xy 136.35 146.05) + (xy 136.25 146.05) + (xy 136.25 146.15) + (xy 136.15 146.15) + (xy 136.15 146.25) + (xy 136.05 146.25) + (xy 136.05 146.35) + (xy 135.95 146.35) + (xy 135.95 146.45) + (xy 135.85 146.45) + (xy 135.85 146.55) + (xy 135.75 146.55) + (xy 135.75 146.65) + (xy 135.65 146.65) + (xy 135.65 146.75) + (xy 135.55 146.75) + (xy 135.55 146.85) + (xy 135.45 146.85) + (xy 135.45 146.95) + (xy 135.35 146.95) + (xy 135.35 148.15) + (xy 135.45 148.15) + (xy 135.45 148.25) + (xy 135.55 148.25) + (xy 135.55 148.35) + (xy 135.95 148.35) + (xy 135.95 148.45) + (xy 136.05 148.45) + (xy 136.05 148.55) + (xy 136.15 148.55) + (xy 136.15 148.65) + (xy 136.25 148.65) + (xy 136.25 149.05) + (xy 136.35 149.05) + (xy 136.35 149.15) + (xy 136.45 149.15) + (xy 136.45 149.25) + (xy 136.55 149.25) + (xy 136.55 149.35) + (xy 136.65 149.35) + (xy 136.65 149.45) + (xy 136.75 149.45) + (xy 136.75 149.55) + (xy 136.85 149.55) + (xy 136.85 149.65) + (xy 136.95 149.65) + (xy 136.95 149.75) + (xy 137.05 149.75) + (xy 137.05 149.85) + (xy 137.15 149.85) + (xy 137.15 149.95) + (xy 137.25 149.95) + (xy 137.25 150.05) + (xy 137.35 150.05) + (xy 137.35 150.15) + (xy 137.45 150.15) + (xy 137.45 150.25) + (xy 137.55 150.25) + (xy 137.55 150.35) + (xy 137.65 150.35) + (xy 137.65 150.45) + (xy 137.75 150.45) + (xy 137.75 150.55) + (xy 137.85 150.55) + (xy 137.85 150.65) + (xy 137.95 150.65) + (xy 137.95 150.75) + (xy 138.05 150.75) + (xy 138.05 150.85) + (xy 138.15 150.85) + (xy 138.15 150.95) + (xy 138.25 150.95) + (xy 138.25 151.05) + (xy 138.35 151.05) + (xy 138.35 151.15) + (xy 138.45 151.15) + (xy 138.45 151.25) + (xy 138.55 151.25) + (xy 138.55 151.35) + (xy 138.65 151.35) + (xy 138.65 151.45) + (xy 138.75 151.45) + (xy 138.75 151.55) + (xy 138.85 151.55) + (xy 138.85 151.65) + (xy 138.95 151.65) + (xy 138.95 151.75) + (xy 139.05 151.75) + (xy 139.05 151.85) + (xy 139.15 151.85) + (xy 139.15 151.95) + (xy 139.25 151.95) + (xy 139.25 152.05) + (xy 139.35 152.05) + (xy 139.35 152.15) + (xy 139.45 152.15) + (xy 139.45 152.25) + (xy 139.55 152.25) + (xy 139.55 152.35) + (xy 139.65 152.35) + (xy 139.65 152.45) + (xy 150.45 152.45) + (xy 150.45 152.35) + (xy 150.55 152.35) + (xy 150.55 152.25) + (xy 150.65 152.25) + (xy 150.65 149.55) + (xy 150.55 149.55) + (xy 150.55 149.45) + (xy 150.45 149.45) + (xy 150.45 149.35) + (xy 150.35 149.35) + (xy 150.35 149.25) + (xy 150.25 149.25) + (xy 150.25 149.15) + (xy 150.15 149.15) + (xy 150.15 149.05) + (xy 150.05 149.05) + (xy 150.05 148.95) + (xy 149.95 148.95) + (xy 149.95 148.85) + (xy 149.85 148.85) + (xy 149.85 148.75) + (xy 149.75 148.75) + (xy 149.75 148.65) + (xy 149.65 148.65) + (xy 149.65 134.95) + (xy 149.75 134.95) + (xy 149.75 134.85) + (xy 149.85 134.85) + (xy 149.85 134.75) + (xy 149.95 134.75) + (xy 149.95 134.65) + (xy 150.05 134.65) + (xy 150.05 134.55) + (xy 150.15 134.55) + (xy 150.15 134.45) + (xy 150.25 134.45) + (xy 150.25 134.35) + (xy 150.35 134.35) + (xy 150.35 134.25) + (xy 150.45 134.25) + (xy 150.45 134.15) + (xy 150.55 134.15) + (xy 150.55 134.05) + (xy 150.65 134.05) + (xy 150.65 133.95) + (xy 150.75 133.95) + (xy 150.75 133.85) + (xy 150.85 133.85) + (xy 150.85 133.75) + (xy 150.95 133.75) + (xy 150.95 133.65) + (xy 151.05 133.65) + (xy 151.05 133.55) + (xy 151.15 133.55) + (xy 151.15 133.45) + (xy 151.25 133.45) + (xy 151.25 133.35) + (xy 151.35 133.35) + (xy 151.35 133.25) + (xy 151.45 133.25) + (xy 151.45 133.15) + (xy 151.55 133.15) + (xy 151.55 133.05) + (xy 151.65 133.05) + (xy 151.65 132.95) + (xy 151.75 132.95) + (xy 151.75 132.85) + (xy 151.85 132.85) + (xy 151.85 132.75) + (xy 151.75 132.75) + (xy 151.75 132.65) + (xy 151.65 132.65) + (xy 151.65 132.55) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 160.05 141.35) + (xy 159.95 141.35) + (xy 159.95 141.45) + (xy 159.85 141.45) + (xy 159.85 141.55) + (xy 159.75 141.55) + (xy 159.75 141.85) + (xy 159.65 141.85) + (xy 159.65 141.95) + (xy 159.55 141.95) + (xy 159.55 142.05) + (xy 159.45 142.05) + (xy 159.45 142.15) + (xy 159.05 142.15) + (xy 159.05 142.25) + (xy 158.95 142.25) + (xy 158.95 142.35) + (xy 158.85 142.35) + (xy 158.85 143.45) + (xy 158.95 143.45) + (xy 158.95 143.55) + (xy 159.05 143.55) + (xy 159.05 143.65) + (xy 159.15 143.65) + (xy 159.15 143.75) + (xy 159.25 143.75) + (xy 159.25 143.85) + (xy 159.35 143.85) + (xy 159.35 143.95) + (xy 159.45 143.95) + (xy 159.45 144.05) + (xy 160.05 144.05) + (xy 160.05 143.95) + (xy 161.25 143.95) + (xy 161.25 143.85) + (xy 161.35 143.85) + (xy 161.35 143.75) + (xy 161.45 143.75) + (xy 161.45 142.95) + (xy 161.55 142.95) + (xy 161.55 142.75) + (xy 161.65 142.75) + (xy 161.65 142.55) + (xy 161.55 142.55) + (xy 161.55 142.35) + (xy 161.45 142.35) + (xy 161.45 141.65) + (xy 161.35 141.65) + (xy 161.35 141.55) + (xy 161.25 141.55) + (xy 161.25 141.45) + (xy 160.05 141.45) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 111.45 144.65) + (xy 111.45 144.75) + (xy 111.35 144.75) + (xy 111.35 144.85) + (xy 111.25 144.85) + (xy 111.25 144.95) + (xy 111.35 144.95) + (xy 111.35 145.05) + (xy 111.45 145.05) + (xy 111.45 146.45) + (xy 111.35 146.45) + (xy 111.35 146.55) + (xy 111.25 146.55) + (xy 111.25 147.25) + (xy 111.15 147.25) + (xy 111.15 147.35) + (xy 111.05 147.35) + (xy 111.05 147.45) + (xy 110.95 147.45) + (xy 110.95 147.55) + (xy 110.85 147.55) + (xy 110.85 147.65) + (xy 110.75 147.65) + (xy 110.75 147.75) + (xy 110.85 147.75) + (xy 110.85 147.85) + (xy 110.95 147.85) + (xy 110.95 147.95) + (xy 111.05 147.95) + (xy 111.05 148.05) + (xy 111.15 148.05) + (xy 111.15 148.15) + (xy 111.25 148.15) + (xy 111.25 148.25) + (xy 117.95 148.25) + (xy 117.95 148.15) + (xy 118.05 148.15) + (xy 118.05 148.05) + (xy 118.15 148.05) + (xy 118.15 147.55) + (xy 118.05 147.55) + (xy 118.05 147.45) + (xy 117.95 147.45) + (xy 117.95 147.35) + (xy 117.85 147.35) + (xy 117.85 147.25) + (xy 117.75 147.25) + (xy 117.75 147.15) + (xy 117.65 147.15) + (xy 117.65 147.05) + (xy 117.55 147.05) + (xy 117.55 146.95) + (xy 117.45 146.95) + (xy 117.45 146.85) + (xy 117.35 146.85) + (xy 117.35 146.75) + (xy 117.25 146.75) + (xy 117.25 146.65) + (xy 117.15 146.65) + (xy 117.15 146.55) + (xy 117.05 146.55) + (xy 117.05 146.45) + (xy 116.95 146.45) + (xy 116.95 146.35) + (xy 116.85 146.35) + (xy 116.85 146.25) + (xy 116.75 146.25) + (xy 116.75 146.15) + (xy 116.65 146.15) + (xy 116.65 146.05) + (xy 116.55 146.05) + (xy 116.55 145.95) + (xy 116.45 145.95) + (xy 116.45 145.85) + (xy 116.35 145.85) + (xy 116.35 145.75) + (xy 116.25 145.75) + (xy 116.25 145.65) + (xy 116.15 145.65) + (xy 116.15 145.55) + (xy 116.05 145.55) + (xy 116.05 145.45) + (xy 115.95 145.45) + (xy 115.95 145.35) + (xy 115.85 145.35) + (xy 115.85 145.25) + (xy 115.75 145.25) + (xy 115.75 145.15) + (xy 115.65 145.15) + (xy 115.65 145.05) + (xy 115.55 145.05) + (xy 115.55 144.95) + (xy 115.45 144.95) + (xy 115.45 144.85) + (xy 115.35 144.85) + (xy 115.35 144.75) + (xy 115.25 144.75) + (xy 115.25 144.65) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 135.65 149.65) + (xy 135.55 149.65) + (xy 135.55 149.75) + (xy 135.45 149.75) + (xy 135.45 149.85) + (xy 135.35 149.85) + (xy 135.35 155.25) + (xy 135.25 155.25) + (xy 135.25 155.35) + (xy 135.05 155.35) + (xy 135.05 155.45) + (xy 133.45 155.45) + (xy 133.45 155.35) + (xy 133.25 155.35) + (xy 133.25 155.25) + (xy 133.15 155.25) + (xy 133.15 152.75) + (xy 133.05 152.75) + (xy 133.05 152.65) + (xy 132.95 152.65) + (xy 132.95 152.55) + (xy 130.65 152.55) + (xy 130.65 152.65) + (xy 130.55 152.65) + (xy 130.55 152.75) + (xy 130.45 152.75) + (xy 130.45 153.15) + (xy 130.35 153.15) + (xy 130.35 153.25) + (xy 130.25 153.25) + (xy 130.25 153.35) + (xy 130.15 153.35) + (xy 130.15 153.45) + (xy 129.75 153.45) + (xy 129.75 153.55) + (xy 129.65 153.55) + (xy 129.65 153.65) + (xy 129.55 153.65) + (xy 129.55 153.75) + (xy 129.45 153.75) + (xy 129.45 153.85) + (xy 129.35 153.85) + (xy 129.35 153.95) + (xy 129.25 153.95) + (xy 129.25 154.05) + (xy 129.15 154.05) + (xy 129.15 154.15) + (xy 127.25 154.15) + (xy 127.25 154.25) + (xy 127.15 154.25) + (xy 127.15 154.35) + (xy 127.05 154.35) + (xy 127.05 154.45) + (xy 126.95 154.45) + (xy 126.95 154.55) + (xy 126.85 154.55) + (xy 126.85 154.65) + (xy 126.75 154.65) + (xy 126.75 154.75) + (xy 126.65 154.75) + (xy 126.65 155.95) + (xy 126.55 155.95) + (xy 126.55 156.15) + (xy 126.35 156.15) + (xy 126.35 156.25) + (xy 126.25 156.25) + (xy 126.25 156.35) + (xy 126.15 156.35) + (xy 126.15 156.45) + (xy 126.25 156.45) + (xy 126.25 156.55) + (xy 126.35 156.55) + (xy 126.35 156.65) + (xy 153.95 156.65) + (xy 153.95 156.55) + (xy 154.05 156.55) + (xy 154.05 156.45) + (xy 154.15 156.45) + (xy 154.15 155.95) + (xy 154.05 155.95) + (xy 154.05 155.85) + (xy 153.95 155.85) + (xy 153.95 155.75) + (xy 153.85 155.75) + (xy 153.85 155.65) + (xy 153.75 155.65) + (xy 153.75 155.55) + (xy 153.65 155.55) + (xy 153.65 155.45) + (xy 153.55 155.45) + (xy 153.55 155.35) + (xy 153.45 155.35) + (xy 153.45 155.25) + (xy 153.35 155.25) + (xy 153.35 155.15) + (xy 153.25 155.15) + (xy 153.25 155.05) + (xy 153.15 155.05) + (xy 153.15 154.95) + (xy 153.05 154.95) + (xy 153.05 155.05) + (xy 152.95 155.05) + (xy 152.95 155.15) + (xy 152.85 155.15) + (xy 152.85 155.25) + (xy 152.75 155.25) + (xy 152.75 155.35) + (xy 152.55 155.35) + (xy 152.55 155.45) + (xy 150.95 155.45) + (xy 150.95 155.35) + (xy 150.75 155.35) + (xy 150.75 155.25) + (xy 150.65 155.25) + (xy 150.65 153.55) + (xy 150.55 153.55) + (xy 150.55 153.45) + (xy 150.45 153.45) + (xy 150.45 153.35) + (xy 139.25 153.35) + (xy 139.25 153.25) + (xy 139.15 153.25) + (xy 139.15 153.15) + (xy 139.05 153.15) + (xy 139.05 153.05) + (xy 138.95 153.05) + (xy 138.95 152.95) + (xy 138.85 152.95) + (xy 138.85 152.85) + (xy 138.75 152.85) + (xy 138.75 152.75) + (xy 138.65 152.75) + (xy 138.65 152.65) + (xy 138.55 152.65) + (xy 138.55 152.55) + (xy 138.45 152.55) + (xy 138.45 152.45) + (xy 138.35 152.45) + (xy 138.35 152.35) + (xy 138.25 152.35) + (xy 138.25 152.25) + (xy 138.15 152.25) + (xy 138.15 152.15) + (xy 138.05 152.15) + (xy 138.05 152.05) + (xy 137.95 152.05) + (xy 137.95 151.95) + (xy 137.85 151.95) + (xy 137.85 151.85) + (xy 137.75 151.85) + (xy 137.75 151.75) + (xy 137.65 151.75) + (xy 137.65 151.65) + (xy 137.55 151.65) + (xy 137.55 151.55) + (xy 137.45 151.55) + (xy 137.45 151.45) + (xy 137.35 151.45) + (xy 137.35 151.35) + (xy 137.25 151.35) + (xy 137.25 151.25) + (xy 137.15 151.25) + (xy 137.15 151.15) + (xy 137.05 151.15) + (xy 137.05 151.05) + (xy 136.95 151.05) + (xy 136.95 150.95) + (xy 136.85 150.95) + (xy 136.85 150.85) + (xy 136.75 150.85) + (xy 136.75 150.75) + (xy 136.65 150.75) + (xy 136.65 150.65) + (xy 136.55 150.65) + (xy 136.55 150.55) + (xy 136.45 150.55) + (xy 136.45 150.45) + (xy 136.35 150.45) + (xy 136.35 150.35) + (xy 136.25 150.35) + (xy 136.25 150.25) + (xy 136.15 150.25) + (xy 136.15 150.15) + (xy 136.05 150.15) + (xy 136.05 150.05) + (xy 135.95 150.05) + (xy 135.95 149.95) + (xy 135.85 149.95) + (xy 135.85 149.85) + (xy 135.75 149.85) + (xy 135.75 149.75) + (xy 135.65 149.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 122.45 153.45) + (xy 122.45 153.55) + (xy 122.35 153.55) + (xy 122.35 153.65) + (xy 122.25 153.65) + (xy 122.25 153.75) + (xy 122.15 153.75) + (xy 122.15 153.85) + (xy 122.05 153.85) + (xy 122.05 153.95) + (xy 121.95 153.95) + (xy 121.95 154.05) + (xy 121.85 154.05) + (xy 121.85 154.15) + (xy 121.75 154.15) + (xy 121.75 154.25) + (xy 121.65 154.25) + (xy 121.65 154.35) + (xy 121.55 154.35) + (xy 121.55 154.45) + (xy 121.45 154.45) + (xy 121.45 154.55) + (xy 121.35 154.55) + (xy 121.35 154.65) + (xy 121.25 154.65) + (xy 121.25 154.75) + (xy 121.15 154.75) + (xy 121.15 155.95) + (xy 121.05 155.95) + (xy 121.05 156.15) + (xy 120.85 156.15) + (xy 120.85 156.25) + (xy 120.75 156.25) + (xy 120.75 156.35) + (xy 120.65 156.35) + (xy 120.65 156.45) + (xy 120.75 156.45) + (xy 120.75 156.55) + (xy 120.85 156.55) + (xy 120.85 156.65) + (xy 125.25 156.65) + (xy 125.25 156.55) + (xy 125.35 156.55) + (xy 125.35 156.45) + (xy 125.45 156.45) + (xy 125.45 156.35) + (xy 125.35 156.35) + (xy 125.35 156.25) + (xy 125.25 156.25) + (xy 125.25 156.15) + (xy 125.05 156.15) + (xy 125.05 155.95) + (xy 124.95 155.95) + (xy 124.95 154.05) + (xy 125.05 154.05) + (xy 125.05 153.85) + (xy 125.15 153.85) + (xy 125.15 153.75) + (xy 125.25 153.75) + (xy 125.25 153.65) + (xy 125.15 153.65) + (xy 125.15 153.55) + (xy 125.05 153.55) + (xy 125.05 153.45) + ) + ) + ) +) diff --git a/pcb/archive/v0.3/kicad/sandtable-controller.kicad_pro b/pcb/archive/v0.3/kicad/sandtable-controller.kicad_pro new file mode 100644 index 0000000..676b0dd --- /dev/null +++ b/pcb/archive/v0.3/kicad/sandtable-controller.kicad_pro @@ -0,0 +1,722 @@ +{ + "board": { + "3dviewports": [], + "design_settings": { + "defaults": { + "apply_defaults_to_fp_fields": false, + "apply_defaults_to_fp_shapes": false, + "apply_defaults_to_fp_text": false, + "board_outline_line_width": 0.05, + "copper_line_width": 0.2, + "copper_text_italic": false, + "copper_text_size_h": 1.5, + "copper_text_size_v": 1.5, + "copper_text_thickness": 0.3, + "copper_text_upright": false, + "courtyard_line_width": 0.05, + "dimension_precision": 4, + "dimension_units": 3, + "dimensions": { + "arrow_length": 1270000, + "extension_offset": 500000, + "keep_text_aligned": true, + "suppress_zeroes": false, + "text_position": 0, + "units_format": 1 + }, + "fab_line_width": 0.1, + "fab_text_italic": false, + "fab_text_size_h": 1.0, + "fab_text_size_v": 1.0, + "fab_text_thickness": 0.15, + "fab_text_upright": false, + "other_line_width": 0.1, + "other_text_italic": false, + "other_text_size_h": 1.0, + "other_text_size_v": 1.0, + "other_text_thickness": 0.15, + "other_text_upright": false, + "pads": { + "drill": 0.0, + "height": 8.0, + "width": 2.54 + }, + "silk_line_width": 0.12, + "silk_text_italic": false, + "silk_text_size_h": 1.0, + "silk_text_size_v": 1.0, + "silk_text_thickness": 0.15, + "silk_text_upright": false, + "zones": { + "min_clearance": 0.508 + } + }, + "diff_pair_dimensions": [], + "drc_exclusions": [], + "meta": { + "filename": "board_design_settings.json", + "version": 2 + }, + "rule_severities": { + "annular_width": "error", + "clearance": "error", + "connection_width": "warning", + "copper_edge_clearance": "error", + "copper_sliver": "warning", + "courtyards_overlap": "error", + "creepage": "error", + "diff_pair_gap_out_of_range": "error", + "diff_pair_uncoupled_length_too_long": "error", + "drill_out_of_range": "error", + "duplicate_footprints": "warning", + "extra_footprint": "warning", + "footprint": "error", + "footprint_filters_mismatch": "ignore", + "footprint_symbol_mismatch": "warning", + "footprint_type_mismatch": "ignore", + "hole_clearance": "error", + "hole_near_hole": "error", + "hole_to_hole": "error", + "holes_co_located": "warning", + "invalid_outline": "error", + "isolated_copper": "warning", + "item_on_disabled_layer": "error", + "items_not_allowed": "error", + "length_out_of_range": "error", + "lib_footprint_issues": "ignore", + "lib_footprint_mismatch": "ignore", + "malformed_courtyard": "error", + "microvia_drill_out_of_range": "error", + "mirrored_text_on_front_layer": "warning", + "missing_courtyard": "ignore", + "missing_footprint": "warning", + "net_conflict": "warning", + "nonmirrored_text_on_back_layer": "warning", + "npth_inside_courtyard": "ignore", + "padstack": "warning", + "pth_inside_courtyard": "ignore", + "shorting_items": "error", + "silk_edge_clearance": "ignore", + "silk_over_copper": "ignore", + "silk_overlap": "ignore", + "skew_out_of_range": "error", + "solder_mask_bridge": "error", + "starved_thermal": "error", + "text_height": "ignore", + "text_thickness": "warning", + "through_hole_pad_without_hole": "error", + "too_many_vias": "error", + "track_angle": "error", + "track_dangling": "warning", + "track_segment_length": "error", + "track_width": "error", + "tracks_crossing": "error", + "unconnected_items": "error", + "unresolved_variable": "error", + "via_dangling": "warning", + "zones_intersect": "error" + }, + "rules": { + "max_error": 0.005, + "min_clearance": 0.16, + "min_connection": 0.0, + "min_copper_edge_clearance": 0.3, + "min_groove_width": 0.0, + "min_hole_clearance": 0.2, + "min_hole_to_hole": 0.25, + "min_microvia_diameter": 0.2, + "min_microvia_drill": 0.1, + "min_resolved_spokes": 2, + "min_silk_clearance": 0.0, + "min_text_height": 0.8, + "min_text_thickness": 0.08, + "min_through_hole_diameter": 0.3, + "min_track_width": 0.16, + "min_via_annular_width": 0.15, + "min_via_diameter": 0.6, + "solder_mask_to_copper_clearance": 0.0, + "use_height_for_length_calcs": true + }, + "teardrop_options": [ + { + "td_onpthpad": true, + "td_onroundshapesonly": false, + "td_onsmdpad": true, + "td_ontrackend": false, + "td_onvia": true + } + ], + "teardrop_parameters": [ + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_round_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_rect_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_track_end", + "td_width_to_size_filter_ratio": 0.9 + } + ], + "track_widths": [], + "tuning_pattern_settings": { + "diff_pair_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 1.0 + }, + "diff_pair_skew_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + }, + "single_track_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + } + }, + "via_dimensions": [], + "zones_allow_external_fillets": false + }, + "ipc2581": { + "dist": "", + "distpn": "", + "internal_id": "", + "mfg": "", + "mpn": "" + }, + "layer_pairs": [], + "layer_presets": [], + "viewports": [] + }, + "cvpcb": { + "equivalence_files": [] + }, + "erc": { + "erc_exclusions": [], + "meta": { + "version": 0 + }, + "pin_map": [ + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 1, + 0, + 1, + 2 + ], + [ + 0, + 1, + 0, + 0, + 0, + 0, + 1, + 1, + 2, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 2 + ], + [ + 1, + 1, + 1, + 1, + 1, + 0, + 1, + 1, + 1, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 1, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 2, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2 + ] + ], + "rule_severities": { + "bus_definition_conflict": "error", + "bus_entry_needed": "error", + "bus_to_bus_conflict": "error", + "bus_to_net_conflict": "error", + "conflicting_netclasses": "error", + "different_unit_footprint": "error", + "different_unit_net": "error", + "duplicate_reference": "error", + "duplicate_sheet_names": "error", + "endpoint_off_grid": "warning", + "extra_units": "error", + "footprint_filter": "ignore", + "footprint_link_issues": "warning", + "four_way_junction": "ignore", + "global_label_dangling": "warning", + "hier_label_mismatch": "error", + "label_dangling": "error", + "label_multiple_wires": "warning", + "lib_symbol_issues": "warning", + "lib_symbol_mismatch": "warning", + "missing_bidi_pin": "warning", + "missing_input_pin": "warning", + "missing_power_pin": "error", + "missing_unit": "warning", + "multiple_net_names": "warning", + "net_not_bus_member": "warning", + "no_connect_connected": "warning", + "no_connect_dangling": "warning", + "pin_not_connected": "error", + "pin_not_driven": "error", + "pin_to_pin": "warning", + "power_pin_not_driven": "error", + "same_local_global_label": "warning", + "similar_label_and_power": "warning", + "similar_labels": "warning", + "similar_power": "warning", + "simulation_model_issue": "ignore", + "single_global_label": "ignore", + "unannotated": "error", + "unconnected_wire_endpoint": "warning", + "unit_value_mismatch": "error", + "unresolved_variable": "error", + "wire_dangling": "error" + } + }, + "libraries": { + "pinned_footprint_libs": [], + "pinned_symbol_libs": [] + }, + "meta": { + "filename": "sandtable-controller.kicad_pro", + "version": 3 + }, + "net_settings": { + "classes": [ + { + "bus_width": 12, + "clearance": 0.16, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Default", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 2147483647, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.2, + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + }, + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Power", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 0, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.8, + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + }, + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Motor", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 0, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.6, + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + }, + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Rail", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 0, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.5, + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + } + ], + "meta": { + "version": 4 + }, + "net_colors": null, + "netclass_assignments": null, + "netclass_patterns": [ + { + "netclass": "Power", + "pattern": "/GND" + }, + { + "netclass": "Power", + "pattern": "/VIN_RAW" + }, + { + "netclass": "Power", + "pattern": "/+12V" + }, + { + "netclass": "Motor", + "pattern": "/X_1A" + }, + { + "netclass": "Motor", + "pattern": "/X_1B" + }, + { + "netclass": "Motor", + "pattern": "/X_2A" + }, + { + "netclass": "Motor", + "pattern": "/X_2B" + }, + { + "netclass": "Motor", + "pattern": "/Y_1A" + }, + { + "netclass": "Motor", + "pattern": "/Y_1B" + }, + { + "netclass": "Motor", + "pattern": "/Y_2A" + }, + { + "netclass": "Motor", + "pattern": "/Y_2B" + }, + { + "netclass": "Rail", + "pattern": "/+5V" + }, + { + "netclass": "Rail", + "pattern": "/+5V_REG" + }, + { + "netclass": "Rail", + "pattern": "/VBUS" + }, + { + "netclass": "Rail", + "pattern": "/+3V3" + } + ] + }, + "pcbnew": { + "last_paths": { + "gencad": "", + "idf": "", + "netlist": "", + "plot": "", + "pos_files": "", + "specctra_dsn": "", + "step": "", + "svg": "", + "vrml": "" + }, + "page_layout_descr_file": "" + }, + "schematic": { + "annotate_start_num": 0, + "bom_export_filename": "${PROJECTNAME}.csv", + "bom_fmt_presets": [], + "bom_fmt_settings": { + "field_delimiter": ",", + "keep_line_breaks": false, + "keep_tabs": false, + "name": "CSV", + "ref_delimiter": ",", + "ref_range_delimiter": "", + "string_delimiter": "\"" + }, + "bom_presets": [], + "bom_settings": { + "exclude_dnp": false, + "fields_ordered": [ + { + "group_by": false, + "label": "Reference", + "name": "Reference", + "show": true + }, + { + "group_by": true, + "label": "Value", + "name": "Value", + "show": true + }, + { + "group_by": false, + "label": "Datasheet", + "name": "Datasheet", + "show": true + }, + { + "group_by": false, + "label": "Footprint", + "name": "Footprint", + "show": true + }, + { + "group_by": false, + "label": "Qty", + "name": "${QUANTITY}", + "show": true + }, + { + "group_by": true, + "label": "DNP", + "name": "${DNP}", + "show": true + } + ], + "filter_string": "", + "group_symbols": true, + "include_excluded_from_bom": false, + "name": "Grouped By Value", + "sort_asc": true, + "sort_field": "Reference" + }, + "connection_grid_size": 50.0, + "drawing": { + "dashed_lines_dash_length_ratio": 12.0, + "dashed_lines_gap_length_ratio": 3.0, + "default_line_thickness": 6.0, + "default_text_size": 50.0, + "field_names": [], + "intersheets_ref_own_page": false, + "intersheets_ref_prefix": "", + "intersheets_ref_short": false, + "intersheets_ref_show": false, + "intersheets_ref_suffix": "", + "junction_size_choice": 3, + "label_size_ratio": 0.25, + "operating_point_overlay_i_precision": 3, + "operating_point_overlay_i_range": "~A", + "operating_point_overlay_v_precision": 3, + "operating_point_overlay_v_range": "~V", + "overbar_offset_ratio": 1.23, + "pin_symbol_size": 0.0, + "text_offset_ratio": 0.08 + }, + "legacy_lib_dir": "", + "legacy_lib_list": [], + "meta": { + "version": 1 + }, + "net_format_name": "", + "page_layout_descr_file": "", + "plot_directory": "", + "space_save_all_events": true, + "spice_current_sheet_as_root": false, + "spice_external_command": "spice \"%I\"", + "spice_model_current_sheet_as_root": true, + "spice_save_all_currents": false, + "spice_save_all_dissipations": false, + "spice_save_all_voltages": false, + "subpart_first_id": 65, + "subpart_id_separator": 0 + }, + "sheets": [ + [ + "d585c3d2-c803-5c74-8a05-da481956c6b2", + "Root" + ] + ], + "text_variables": {} +} \ No newline at end of file diff --git a/pcb/archive/v0.3/kicad/sandtable-controller.kicad_sch b/pcb/archive/v0.3/kicad/sandtable-controller.kicad_sch new file mode 100644 index 0000000..1708f0c --- /dev/null +++ b/pcb/archive/v0.3/kicad/sandtable-controller.kicad_sch @@ -0,0 +1,13312 @@ +(kicad_sch + (version 20250114) + (generator "eeschema") + (generator_version "9.0") + (uuid "d585c3d2-c803-5c74-8a05-da481956c6b2") + (paper "A2") + (title_block + (title "SandTable Controller") + (date "2026-10-22") + (rev "0.3") + (company "lazypugs") + (comment 1 "ESP32-WROOM-32E (FluidNC) + 2x DRV8825 StepStick, 12V in") + (comment 2 "Drop-in for the Arduino+CNC shield bay in the sand table (Uno hole pattern)") + ) + (lib_symbols + (symbol "RF_Module:ESP32-WROOM-32E" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -12.7 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "ESP32-WROOM-32E" + (at 1.27 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "RF_Module:ESP32-WROOM-32D" + (at 16.51 -34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "RF Radio BT ESP ESP32 Espressif onboard PCB antenna" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "ESP32?WROOM?32D*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "ESP32-WROOM-32E_0_1" + (rectangle + (start -12.7 33.02) + (end 12.7 -33.02) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "ESP32-WROOM-32E_1_1" + (pin input line + (at -15.24 30.48 0) + (length 2.54) + (name "EN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -15.24 25.4 0) + (length 2.54) + (name "SENSOR_VP" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -15.24 22.86 0) + (length 2.54) + (name "SENSOR_VN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 0 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "21" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -2.54 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "22" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -5.08 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "17" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -7.62 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "18" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -10.16 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "20" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -12.7 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "19" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -27.94 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "32" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 35.56 270) + (length 2.54) + (name "VDD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -35.56 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -35.56 90) + (length 2.54) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -35.56 90) + (length 2.54) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "38" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -35.56 90) + (length 2.54) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "39" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 30.48 180) + (length 2.54) + (name "IO0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "25" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 27.94 180) + (length 2.54) + (name "TXD0/IO1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "35" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 25.4 180) + (length 2.54) + (name "IO2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "24" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 22.86 180) + (length 2.54) + (name "RXD0/IO3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "34" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 20.32 180) + (length 2.54) + (name "IO4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "26" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 17.78 180) + (length 2.54) + (name "IO5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "29" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 15.24 180) + (length 2.54) + (name "IO12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 12.7 180) + (length 2.54) + (name "IO13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 10.16 180) + (length 2.54) + (name "IO14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 7.62 180) + (length 2.54) + (name "IO15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "23" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 5.08 180) + (length 2.54) + (name "IO16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "27" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 2.54 180) + (length 2.54) + (name "IO17" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "28" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 0 180) + (length 2.54) + (name "IO18" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "30" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -2.54 180) + (length 2.54) + (name "IO19" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "31" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -5.08 180) + (length 2.54) + (name "IO21" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "33" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -7.62 180) + (length 2.54) + (name "IO22" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "36" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -10.16 180) + (length 2.54) + (name "IO23" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "37" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -12.7 180) + (length 2.54) + (name "IO25" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -15.24 180) + (length 2.54) + (name "IO26" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -17.78 180) + (length 2.54) + (name "IO27" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -20.32 180) + (length 2.54) + (name "IO32" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -22.86 180) + (length 2.54) + (name "IO33" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 15.24 -25.4 180) + (length 2.54) + (name "IO34" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 15.24 -27.94 180) + (length 2.54) + (name "IO35" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "SandTable:CH340C_3V3" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -5.08 13.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "CH340C" + (at 1.27 13.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" + (at -18.542 30.226 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://datasheet.lcsc.com/szlcsc/Jiangsu-Qin-Heng-CH340C_C84681.pdf" + (at -6.604 33.274 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB serial converter, crystal-less, UART, SOIC-16" + (at -1.524 36.068 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "USB UART Serial Converter Interface" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOIC*3.9x9.9mm*P1.27mm*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "CH340C_3V3_0_1" + (rectangle + (start -7.62 12.7) + (end 7.62 -12.7) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "CH340C_3V3_1_1" + (pin input line + (at -10.16 7.62 0) + (length 2.54) + (name "R232" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 2.54 0) + (length 2.54) + (name "UD+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 0 0) + (length 2.54) + (name "UD-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -7.62 -5.08 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -7.62 -7.62 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -2.54 15.24 270) + (length 2.54) + (name "VCC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 15.24 270) + (length 2.54) + (name "V3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -15.24 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 10.16 180) + (length 2.54) + (name "TXD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 7.62 180) + (length 2.54) + (name "RXD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 2.54 180) + (length 2.54) + (name "~{CTS}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 0 180) + (length 2.54) + (name "~{DSR}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 -2.54 180) + (length 2.54) + (name "~{RI}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 -5.08 180) + (length 2.54) + (name "~{DCD}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 -7.62 180) + (length 2.54) + (name "~{DTR}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 -10.16 180) + (length 2.54) + (name "~{RTS}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Regulator_Linear:AMS1117-3.3" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -3.81 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "AMS1117-3.3" + (at 0 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-223-3_TabPin2" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "http://www.advanced-monolithic.com/pdf/ds1117.pdf" + (at 2.54 -6.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "linear regulator ldo fixed positive" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOT?223*TabPin2*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "AMS1117-3.3_0_1" + (rectangle + (start -5.08 -5.08) + (end 5.08 1.905) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "AMS1117-3.3_1_1" + (pin power_in line + (at -7.62 0 0) + (length 2.54) + (name "VI" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -7.62 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_out line + (at 7.62 0 180) + (length 2.54) + (name "VO" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "74xGxx:74AHCT1G125" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -2.54 3.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "74AHCT1G125" + (at 0 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "http://www.ti.com/lit/sg/scyt129e/scyt129e.pdf" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Single Buffer Gate Tri-State, Low-Voltage CMOS" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "Single Gate Buff Tri-State LVC CMOS" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOT* SG-*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "74AHCT1G125_0_1" + (polyline + (pts + (xy -7.62 6.35) + (xy -7.62 -6.35) + (xy 5.08 0) + (xy -7.62 6.35) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "74AHCT1G125_1_1" + (pin input line + (at -15.24 0 0) + (length 7.62) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -5.08 10.16 270) + (length 5.08) + (name "VCC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -5.08 -10.16 90) + (length 5.08) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input inverted + (at 0 10.16 270) + (length 7.62) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin tri_state line + (at 12.7 0 180) + (length 7.62) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Converter_DCDC:R-785.0-0.5" + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -3.81 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "R-785.0-0.5" + (at 0 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT" + (at 1.27 -6.35 0) + (effects + (font + (size 1.27 1.27) + (italic yes) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.recom-power.com/pdf/Innoline/R-78xx-0.5.pdf" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "500mA Step-Down DC/DC-Regulator, 6.5-18V input, 5V fixed Output Voltage, LM78xx replacement, -40°C to +85°C, SIP3" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "dc-dc recom Step-Down DC/DC-Regulator" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Converter*DCDC*RECOM*R*78E*0.5*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "R-785.0-0.5_0_1" + (rectangle + (start -5.08 1.905) + (end 5.08 -5.08) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "R-785.0-0.5_1_1" + (pin power_in line + (at -7.62 0 0) + (length 2.54) + (name "IN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -7.62 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_out line + (at 7.62 0 180) + (length 2.54) + (name "OUT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "SandTable:DRV8825_StepStick" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "A" + (at -2.54 19.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Pololu_Breakout_A4988" + (at -2.54 16.51 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Footprint" "Module:Pololu_Breakout-16_15.2x20.3mm" + (at 6.985 -19.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.pololu.com/product/2980/pictures" + (at 2.54 -7.62 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Pololu Breakout Board, Stepper Driver A4988" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "Pololu Breakout Board Stepper Driver A4988" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Pololu*Breakout*15.2x20.3mm*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "DRV8825_StepStick_0_1" + (rectangle + (start 10.16 -17.78) + (end -7.62 15.24) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "DRV8825_StepStick_1_1" + (pin input line + (at -10.16 10.16 0) + (length 2.54) + (name "~{RST}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 7.62 0) + (length 2.54) + (name "~{SLP}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 2.54 0) + (length 2.54) + (name "~{EN}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 0 0) + (length 2.54) + (name "STEP" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -2.54 0) + (length 2.54) + (name "DIR" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -7.62 0) + (length 2.54) + (name "M0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -10.16 0) + (length 2.54) + (name "M1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -12.7 0) + (length 2.54) + (name "M2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 17.78 270) + (length 2.54) + (name "VDD/~{FAULT}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -20.32 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 5.08 17.78 270) + (length 2.54) + (name "VMOT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 5.08 -20.32 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 2.54 180) + (length 2.54) + (name "A2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 0 180) + (length 2.54) + (name "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 -2.54 180) + (length 2.54) + (name "B1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 -5.08 180) + (length 2.54) + (name "B2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector:Barrel_Jack" + (pin_names + (offset 1.016) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 5.334 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Barrel_Jack" + (at 0 -5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 1.27 -1.016 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 1.27 -1.016 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "DC Barrel Jack" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "DC power barrel jack connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "BarrelJack*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Barrel_Jack_0_1" + (rectangle + (start -5.08 3.81) + (end 5.08 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (polyline + (pts + (xy -3.81 -2.54) + (xy -2.54 -2.54) + (xy -1.27 -1.27) + (xy 0 -2.54) + (xy 2.54 -2.54) + (xy 5.08 -2.54) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -3.302 1.905) + (mid -3.9343 2.54) + (end -3.302 3.175) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -3.302 1.905) + (mid -3.9343 2.54) + (end -3.302 3.175) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (rectangle + (start 3.683 3.175) + (end -3.302 1.905) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 5.08 2.54) + (xy 3.81 2.54) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Barrel_Jack_1_1" + (pin passive line + (at 7.62 2.54 180) + (length 2.54) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 7.62 -2.54 180) + (length 2.54) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector:USB_C_Receptacle_USB2.0_16P" + (pin_names + (offset 1.016) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 22.225 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "USB_C_Receptacle_USB2.0_16P" + (at 0 19.685 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 3.81 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.usb.org/sites/default/files/documents/usb_type-c.zip" + (at 3.81 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB 2.0-only 16P Type-C Receptacle connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "usb universal serial bus type-C USB2.0" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "USB*C*Receptacle*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_16P_0_0" + (rectangle + (start -0.254 -17.78) + (end 0.254 -16.764) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 15.494) + (end 9.144 14.986) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 10.414) + (end 9.144 9.906) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 7.874) + (end 9.144 7.366) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 2.794) + (end 9.144 2.286) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 0.254) + (end 9.144 -0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -2.286) + (end 9.144 -2.794) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -4.826) + (end 9.144 -5.334) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -12.446) + (end 9.144 -12.954) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -14.986) + (end 9.144 -15.494) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_16P_0_1" + (rectangle + (start -10.16 17.78) + (end 10.16 -17.78) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (polyline + (pts + (xy -8.89 -3.81) + (xy -8.89 3.81) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -7.62 -3.81) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start -7.62 3.81) + (mid -6.985 4.4423) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -7.62 3.81) + (mid -6.985 4.4423) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start -8.89 3.81) + (mid -6.985 5.7067) + (end -5.08 3.81) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -5.08 -3.81) + (mid -6.985 -5.7067) + (end -8.89 -3.81) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -6.35 -3.81) + (mid -6.985 -4.4423) + (end -7.62 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -6.35 -3.81) + (mid -6.985 -4.4423) + (end -7.62 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy -5.08 3.81) + (xy -5.08 -3.81) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center -2.54 1.143) + (radius 0.635) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy -1.27 4.318) + (xy 0 6.858) + (xy 1.27 4.318) + (xy -1.27 4.318) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 0 -2.032) + (xy 2.54 0.508) + (xy 2.54 1.778) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 -3.302) + (xy -2.54 -0.762) + (xy -2.54 0.508) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 -5.842) + (xy 0 4.318) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 0 -5.842) + (radius 1.27) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (rectangle + (start 1.905 1.778) + (end 3.175 3.048) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_16P_1_1" + (pin passive line + (at -7.62 -22.86 90) + (length 5.08) + (name "SHIELD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "S1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 10.16 180) + (length 5.08) + (name "CC1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 7.62 180) + (length 5.08) + (name "CC2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 2.54 180) + (length 5.08) + (name "D-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 0 180) + (length 5.08) + (name "D-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -2.54 180) + (length 5.08) + (name "D+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -5.08 180) + (length 5.08) + (name "D+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -12.7 180) + (length 5.08) + (name "SBU1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -15.24 180) + (length 5.08) + (name "SBU2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x04" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x04" + (at 0 -7.62 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Conn_01x04_1_1" + (rectangle + (start -1.27 3.81) + (end 1.27 -6.35) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -4.953) + (end 0 -5.207) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -5.08 0) + (length 3.81) + (name "Pin_4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x03" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x03" + (at 0 -5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Conn_01x03_1_1" + (rectangle + (start -1.27 3.81) + (end 1.27 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:D_Schottky" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "D" + (at 0 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "D_Schottky" + (at 0 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Schottky diode" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "diode Schottky" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "D_Schottky_0_1" + (polyline + (pts + (xy -1.905 0.635) + (xy -1.905 1.27) + (xy -1.27 1.27) + (xy -1.27 -1.27) + (xy -0.635 -1.27) + (xy -0.635 -0.635) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 1.27) + (xy 1.27 -1.27) + (xy -1.27 0) + (xy 1.27 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 0) + (xy -1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "D_Schottky_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:LED" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "D" + (at 0 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 0 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Light emitting diode" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "LED diode" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "LED* LED_SMD:* LED_THT:*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "LED_0_1" + (polyline + (pts + (xy -3.048 -0.762) + (xy -4.572 -2.286) + (xy -3.81 -2.286) + (xy -4.572 -2.286) + (xy -4.572 -1.524) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.778 -0.762) + (xy -3.302 -2.286) + (xy -2.54 -2.286) + (xy -3.302 -2.286) + (xy -3.302 -1.524) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 0) + (xy 1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 -1.27) + (xy -1.27 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.27) + (xy 1.27 1.27) + (xy -1.27 0) + (xy 1.27 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "LED_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Transistor_BJT:MMBT3904" + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "Q" + (at 5.08 1.905 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "MMBT3904" + (at 5.08 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 5.08 -1.905 0) + (effects + (font + (size 1.27 1.27) + (italic yes) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.onsemi.com/pdf/datasheet/pzt3904-d.pdf" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Description" "0.2A Ic, 40V Vce, Small Signal NPN Transistor, SOT-23" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Device" "NPN" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Pins" "1=B 2=E 3=C" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "NPN Transistor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOT?23*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "MMBT3904_0_1" + (polyline + (pts + (xy -2.54 0) + (xy 0.635 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.635 1.905) + (xy 0.635 -1.905) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 1.27 0) + (radius 2.8194) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "MMBT3904_1_1" + (polyline + (pts + (xy 0.635 0.635) + (xy 2.54 2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.635 -0.635) + (xy 2.54 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.778) + (xy 1.778 -1.27) + (xy 2.286 -2.286) + (xy 1.27 -1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (pin input line + (at -5.08 0 0) + (length 2.54) + (name "B" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 5.08 270) + (length 2.54) + (name "C" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 -5.08 90) + (length 2.54) + (name "E" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Switch:SW_Push" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "SW" + (at 1.27 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "SW_Push" + (at 0 -1.524 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Push button switch, generic, two pins" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "switch normally-open pushbutton push-button" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "SW_Push_0_1" + (circle + (center -2.032 0) + (radius 0.508) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 1.27) + (xy 0 3.048) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 2.032 0) + (radius 0.508) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 1.27) + (xy -2.54 1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 2.54) + (name "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 0 180) + (length 2.54) + (name "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:C_Polarized" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "C" + (at 0.635 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "C_Polarized" + (at 0.635 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0.9652 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "cap capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "CP_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "C_Polarized_0_1" + (rectangle + (start -2.286 0.508) + (end 2.286 1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.778 2.286) + (xy -0.762 2.286) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 2.794) + (xy -1.27 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 2.286 -0.508) + (end -2.286 -1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + ) + (symbol "C_Polarized_1_1" + (pin passive line + (at 0 3.81 270) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:C" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "C" + (at 0.635 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "C" + (at 0.635 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0.9652 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "cap capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "C_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "C_0_1" + (polyline + (pts + (xy -2.032 0.762) + (xy 2.032 0.762) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -2.032 -0.762) + (xy 2.032 -0.762) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "C_1_1" + (pin passive line + (at 0 3.81 270) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:R" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "R" + (at 2.032 0 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "R" + (at 0 0 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at -1.778 0 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "R res resistor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "R_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "R_0_1" + (rectangle + (start -1.016 -2.54) + (end 1.016 2.54) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "R_1_1" + (pin passive line + (at 0 3.81 270) + (length 1.27) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 1.27) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Mechanical:MountingHole" + (pin_names + (offset 1.016) + ) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (property "Reference" "H" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MountingHole" + (at 0 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Mounting Hole without connection" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "mounting hole" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "MountingHole*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "MountingHole_0_1" + (circle + (center 0 0) + (radius 1.27) + (stroke + (width 1.27) + (type default) + ) + (fill + (type none) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "power:PWR_FLAG" + (power) + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "#FLG" + (at 0 1.905 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 0 3.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "flag power" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "PWR_FLAG_0_0" + (pin power_out line + (at 0 0 90) + (length 0) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (symbol "PWR_FLAG_0_1" + (polyline + (pts + (xy 0 0) + (xy 0 1.27) + (xy -1.016 1.905) + (xy 0 2.54) + (xy 1.016 1.905) + (xy 0 1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (embedded_fonts no) + ) + ) + (text "POWER INPUT 12V -> 5V" + (exclude_from_sim no) + (at 12.7 21.59 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "c4c8192a-8f93-54ea-a08a-8f64f9245c2f") + ) + (rectangle + (start 10.16 22.86) + (end 287.02 104.14) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "ba7a523e-cdb4-5f91-9df4-5f1f876153e3") + ) + (text "3.3V" + (exclude_from_sim no) + (at 294.64 21.59 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "f5550dac-3ac6-5688-9dda-5a5d82541cdf") + ) + (rectangle + (start 292.1 22.86) + (end 398.78 104.14) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "7b6a0b4c-0851-5aa6-afb2-27e579b152a4") + ) + (text "SENSORS / LED / EXPANSION" + (exclude_from_sim no) + (at 406.4 21.59 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "030749c6-46c7-5aa0-9aec-4df84b858a40") + ) + (rectangle + (start 403.86 22.86) + (end 579.12 238.76) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "edb4a69f-87de-5c77-bf12-4da7f0382a36") + ) + (text "USB-C + USB-SERIAL + AUTO-RESET" + (exclude_from_sim no) + (at 12.7 113.03 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "be530651-0f75-575d-b40f-f7366f9f729c") + ) + (rectangle + (start 10.16 114.3) + (end 190.5 264.16) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "ba187f4e-d9c1-54a3-a414-c8f73960763d") + ) + (text "ESP32" + (exclude_from_sim no) + (at 198.12 113.03 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "4ce1a6c4-6628-586d-95b0-560910efe84b") + ) + (rectangle + (start 195.58 114.3) + (end 398.78 264.16) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "fcc3df94-af80-5671-9ab9-ec05cdabd3e8") + ) + (text "STEPPER DRIVERS (DRV8825, 1/32 step: M0-M2, RST, SLP tied high)" + (exclude_from_sim no) + (at 12.7 273.05 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "e335a495-c103-5bfe-a5c2-da9a03c43abb") + ) + (rectangle + (start 10.16 274.32) + (end 398.78 406.4) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "e6249f9c-7f0b-506e-bca3-0b894e05730c") + ) + (text "MOUNTING (Arduino Uno pattern)" + (exclude_from_sim no) + (at 406.4 247.65 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "0e78c07b-fb50-58fd-8500-187d1784c4b7") + ) + (rectangle + (start 403.86 248.92) + (end 579.12 299.72) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "4cb74b5d-4148-587a-814b-37d65535fbe3") + ) + (wire + (pts + (xy 214.63 138.43) + (xy 212.09 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "240551b2-9cde-5b2b-8009-ce607bce12fe") + ) + (label "EN" + (at 212.09 138.43 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "73afaca1-477b-5f9c-acba-ff5f5e14ccc7") + ) + (no_connect + (at 214.63 143.51) + (uuid "ce47185c-e25d-5e79-b67e-ba3fb3b6b08d") + ) + (no_connect + (at 214.63 146.05) + (uuid "9cc52635-bdb1-5134-9963-4b51c2aa6617") + ) + (no_connect + (at 217.17 168.91) + (uuid "6442f60e-3a8f-5735-9a87-ce9861e2230a") + ) + (no_connect + (at 217.17 171.45) + (uuid "65dab073-8da4-5a7b-ae85-73545cd6fcd1") + ) + (no_connect + (at 217.17 173.99) + (uuid "e1821caa-1180-5358-9820-b08c0cbe2751") + ) + (no_connect + (at 217.17 176.53) + (uuid "b56e2d02-5bf1-53a8-95f8-b2d442023141") + ) + (no_connect + (at 217.17 179.07) + (uuid "55b8b8b3-c043-5819-a240-5f01bd5af346") + ) + (no_connect + (at 217.17 181.61) + (uuid "920fd07c-61d1-5b5c-9cd2-13a466c5071e") + ) + (no_connect + (at 217.17 196.85) + (uuid "f86c0f01-9ffc-5af7-9c45-4b029ef1c5fc") + ) + (wire + (pts + (xy 229.87 133.35) + (xy 229.87 130.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "248c6b1a-f7c6-5eac-bde7-ffdd0b49f210") + ) + (label "+3V3" + (at 229.87 130.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "595ee7dc-ca5f-56e2-b82a-f0afd20cab8e") + ) + (wire + (pts + (xy 229.87 204.47) + (xy 229.87 207.01) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4f2a0de9-af13-5541-b709-e6bdc1455bf1") + ) + (label "GND" + (at 229.87 207.01 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c8844025-8726-5930-bdaf-0e39231c52b4") + ) + (wire + (pts + (xy 245.11 138.43) + (xy 247.65 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "759b2f34-5caf-5215-a3dc-5036bff7e539") + ) + (label "IO0" + (at 247.65 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "106248b5-e2fe-58c6-86f6-6fa5db6d0b04") + ) + (wire + (pts + (xy 245.11 140.97) + (xy 247.65 140.97) + ) + (stroke + (width 0) + (type default) + ) + (uuid "689befdf-10be-5e01-b121-3d1d97deb267") + ) + (label "U0TXD" + (at 247.65 140.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "981212b1-ead0-5c15-8a4c-884652a0b4d4") + ) + (wire + (pts + (xy 245.11 143.51) + (xy 247.65 143.51) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1cf3deea-fe02-5b07-99d5-4d8214664b22") + ) + (label "STAT" + (at 247.65 143.51 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "18226e67-dbc4-5e05-86bf-d248a3b589d5") + ) + (wire + (pts + (xy 245.11 146.05) + (xy 247.65 146.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8902e5da-816e-5419-9141-48eb08490bf7") + ) + (label "U0RXD" + (at 247.65 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8ec28693-6eb8-5228-a228-8fe801e93a28") + ) + (no_connect + (at 245.11 148.59) + (uuid "0cd3df01-05c2-525c-a339-dd47f77fb5dd") + ) + (no_connect + (at 245.11 151.13) + (uuid "282595eb-16c7-548d-a305-bc9d58a7003e") + ) + (no_connect + (at 245.11 153.67) + (uuid "5bf2442f-f269-537d-b4b4-7a84d83ca661") + ) + (wire + (pts + (xy 245.11 156.21) + (xy 247.65 156.21) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ecaaed7d-2149-560f-bb48-fead9f275e2c") + ) + (label "DRV_EN" + (at 247.65 156.21 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "29e63e15-9d24-573f-850d-be5881b1d733") + ) + (wire + (pts + (xy 245.11 158.75) + (xy 247.65 158.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9212dc0f-f084-5b92-b335-198409e1aa90") + ) + (label "Y_DIR" + (at 247.65 158.75 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2fe30791-452f-5a21-950d-a6e5f1a7ce8c") + ) + (no_connect + (at 245.11 161.29) + (uuid "ba2e3412-845b-55e3-adeb-b61c063140b1") + ) + (no_connect + (at 245.11 163.83) + (uuid "9318ac4c-7c24-52f4-9d82-ede8d393e719") + ) + (no_connect + (at 245.11 166.37) + (uuid "663c73da-dd94-519f-9cd3-28dfa640f284") + ) + (wire + (pts + (xy 245.11 168.91) + (xy 247.65 168.91) + ) + (stroke + (width 0) + (type default) + ) + (uuid "431d27f6-b655-53bc-9256-7c123d22f618") + ) + (label "X_STEP" + (at 247.65 168.91 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c8f31ffb-8cec-5dcc-82bd-bd5d77a43794") + ) + (wire + (pts + (xy 245.11 171.45) + (xy 247.65 171.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d22785a9-4345-590e-83aa-3b5228125ebf") + ) + (label "X_DIR" + (at 247.65 171.45 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "99ef3eb8-94e5-5aea-bfa2-cf08b7ea327d") + ) + (no_connect + (at 245.11 173.99) + (uuid "de53363b-97cf-51a3-9a3f-3363672f98ba") + ) + (no_connect + (at 245.11 176.53) + (uuid "b58b059f-a164-5c01-aa83-31cfbda025c1") + ) + (no_connect + (at 245.11 179.07) + (uuid "e72bdd42-4992-5d77-9758-8cf536c07718") + ) + (wire + (pts + (xy 245.11 181.61) + (xy 247.65 181.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4ad4fd09-7082-5c98-a3ec-ef44408ebd44") + ) + (label "EXP_IO25" + (at 247.65 181.61 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4cf4c1c4-4d8c-5efc-8dcf-f82557989bd9") + ) + (no_connect + (at 245.11 184.15) + (uuid "00121b8f-5572-5a48-8ef8-fbb01f8137c3") + ) + (wire + (pts + (xy 245.11 186.69) + (xy 247.65 186.69) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c0023f27-8c96-59e1-a8ec-6b864179ec75") + ) + (label "Y_STEP" + (at 247.65 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "71bac29a-059e-562e-b324-408bb7708234") + ) + (wire + (pts + (xy 245.11 189.23) + (xy 247.65 189.23) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4ebd3a7c-374c-5bbc-b849-6c5f6406321c") + ) + (label "EXP_IO32" + (at 247.65 189.23 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "98b3c21d-ab0d-5963-9c70-09c44a8bb075") + ) + (wire + (pts + (xy 245.11 191.77) + (xy 247.65 191.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "82a7ecf3-b71f-533e-b13e-81f3f2dafdc3") + ) + (label "LED_DATA" + (at 247.65 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9116a2f2-5715-5ff5-9280-e924dccefb18") + ) + (wire + (pts + (xy 245.11 194.31) + (xy 247.65 194.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a2269d91-5020-5c25-b033-bd82a57c2faa") + ) + (label "HOME" + (at 247.65 194.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5140f5df-6713-5275-bec7-4552c31a5ed9") + ) + (wire + (pts + (xy 245.11 196.85) + (xy 247.65 196.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4857dc95-eaff-5a97-881c-e51d45f182fe") + ) + (label "HALL" + (at 247.65 196.85 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0531bed3-b12f-5fb2-9799-3b254c14ce86") + ) + (no_connect + (at 125.73 138.43) + (uuid "e0f22621-ba7a-5f43-9a42-908111f83bc1") + ) + (wire + (pts + (xy 125.73 143.51) + (xy 123.19 143.51) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f0da982c-9865-5afd-a501-597c78f4e9a2") + ) + (label "USB_DP" + (at 123.19 143.51 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b5450618-2d33-5e61-bb81-0189e893dea1") + ) + (wire + (pts + (xy 125.73 146.05) + (xy 123.19 146.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c9f21662-201a-5207-b5a7-318540ca6a77") + ) + (label "USB_DM" + (at 123.19 146.05 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "35ec62e0-6399-553f-9206-aa74d689e582") + ) + (no_connect + (at 128.27 151.13) + (uuid "e062a046-4285-54d5-8b0a-89e0f0f95a69") + ) + (no_connect + (at 128.27 153.67) + (uuid "c93f2f5b-a8b0-541f-8d48-ee499fc21b3d") + ) + (wire + (pts + (xy 133.35 130.81) + (xy 133.35 128.27) + ) + (stroke + (width 0) + (type default) + ) + (uuid "efca8a70-f792-5dde-9f3e-357eaa65e588") + ) + (label "+3V3" + (at 133.35 128.27 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "6da7232c-a973-5eaf-b657-6e7ee068ba4a") + ) + (wire + (pts + (xy 135.89 130.81) + (xy 135.89 128.27) + ) + (stroke + (width 0) + (type default) + ) + (uuid "758ac277-cb44-5e08-8002-b7bb3e858aa7") + ) + (label "+3V3" + (at 135.89 128.27 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8e29b46e-0de3-51c3-94c9-7f568cbfda60") + ) + (wire + (pts + (xy 135.89 161.29) + (xy 135.89 163.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "44234add-7b0a-5715-ab6b-52be258a379d") + ) + (label "GND" + (at 135.89 163.83 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "db8436a7-caa3-56a3-9b4a-b2f2e6e75e46") + ) + (wire + (pts + (xy 146.05 135.89) + (xy 148.59 135.89) + ) + (stroke + (width 0) + (type default) + ) + (uuid "99982423-cadf-5121-9bad-38f787ff166f") + ) + (label "U0RXD" + (at 148.59 135.89 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9ef3797f-0ad6-5e56-aa75-d0f150ab1218") + ) + (wire + (pts + (xy 146.05 138.43) + (xy 148.59 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a03b7063-8c91-5ac9-aa8e-88b1f9869c28") + ) + (label "U0TXD" + (at 148.59 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ee642092-6948-5b00-b5e3-7b2541baa1b5") + ) + (no_connect + (at 146.05 143.51) + (uuid "70ff7c8e-4737-5ae0-b280-907e73da853e") + ) + (no_connect + (at 146.05 146.05) + (uuid "32218cad-94ea-5bc3-b124-cb1d8fc9cdee") + ) + (no_connect + (at 146.05 148.59) + (uuid "ce45ba62-3683-5660-bce0-fc25619e4f2e") + ) + (no_connect + (at 146.05 151.13) + (uuid "91d9c13c-56ef-5aa5-8f6b-0ad79beff634") + ) + (wire + (pts + (xy 146.05 153.67) + (xy 148.59 153.67) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0a20bb89-de18-5154-8d29-a499296d27ff") + ) + (label "DTR" + (at 148.59 153.67 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "672f82c9-dba2-5fe5-940a-a704b6872544") + ) + (wire + (pts + (xy 146.05 156.21) + (xy 148.59 156.21) + ) + (stroke + (width 0) + (type default) + ) + (uuid "372a1e1c-e982-5463-9fb1-922949dcb7bd") + ) + (label "RTS" + (at 148.59 156.21 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a8e9cfd4-90c6-52e6-a6d0-7dffabaf8967") + ) + (wire + (pts + (xy 306.07 34.29) + (xy 303.53 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "101d6bdb-5af7-5ebe-ae11-357efc5b688a") + ) + (label "+5V" + (at 303.53 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "74b3559c-dd99-5f1a-851b-49557aa7c69e") + ) + (wire + (pts + (xy 313.69 41.91) + (xy 313.69 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1b83291b-81be-58cd-a6e5-3cae5c7f08f4") + ) + (label "GND" + (at 313.69 44.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6ace4da5-d77c-5252-9e14-23f21c121a48") + ) + (wire + (pts + (xy 321.31 34.29) + (xy 323.85 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "21200b66-35d4-5cc3-a1f9-12d9704ca96f") + ) + (label "+3V3" + (at 323.85 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "6a106d42-1f07-5f18-a308-282f7c17e761") + ) + (wire + (pts + (xy 422.91 90.17) + (xy 420.37 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a0236aa0-3147-51b2-953b-30448c6bf1fc") + ) + (label "LED_DATA" + (at 420.37 90.17 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e5729bc2-06ab-5387-9180-0dcc84133ecc") + ) + (wire + (pts + (xy 433.07 80.01) + (xy 433.07 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a67f50f5-0344-5812-b808-924a9c773879") + ) + (label "+5V" + (at 433.07 77.47 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "df1a76ca-6917-59bf-b3b0-3ebd503c337d") + ) + (wire + (pts + (xy 433.07 100.33) + (xy 433.07 102.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5505d5cf-39d0-514e-b276-a0e4a676ff19") + ) + (label "GND" + (at 433.07 102.87 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "62d4cd71-471b-5de8-a304-2389683938bd") + ) + (wire + (pts + (xy 438.15 80.01) + (xy 438.15 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a9603d9c-3932-5444-b5e2-99f38e543c04") + ) + (label "GND" + (at 438.15 77.47 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "271f8831-29d9-5218-b6ef-d5396a910425") + ) + (wire + (pts + (xy 450.85 90.17) + (xy 453.39 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4a79c189-22e1-5341-967a-bf154ac630d9") + ) + (label "LED_BUF" + (at 453.39 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7986fe79-409b-505d-8775-0fe00a53f7eb") + ) + (wire + (pts + (xy 113.03 34.29) + (xy 110.49 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5238ca46-3bff-53ed-984a-6c6cc7f29037") + ) + (label "+12V" + (at 110.49 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "37955106-8b7a-5aba-a138-d55f238e94e5") + ) + (wire + (pts + (xy 120.65 41.91) + (xy 120.65 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ef30784a-7a7e-5a4e-84a6-cea6d7b7bdf7") + ) + (label "GND" + (at 120.65 44.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2a3d067e-3f86-515d-a730-e86091f2a817") + ) + (wire + (pts + (xy 128.27 34.29) + (xy 130.81 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d0a50c44-bb77-59ec-ad10-167218cd77f3") + ) + (label "+5V_REG" + (at 130.81 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d55b0314-908a-5269-b4d3-be46572e14cd") + ) + (wire + (pts + (xy 26.67 298.45) + (xy 24.13 298.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "315599e2-5c2d-5199-be7b-9ef614479a7a") + ) + (label "+3V3" + (at 24.13 298.45 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3faa47c3-0b08-5ccc-87a7-045dfca42924") + ) + (wire + (pts + (xy 26.67 300.99) + (xy 24.13 300.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7731ebd5-b2d0-5db8-bf1e-c1cb15a6264c") + ) + (label "+3V3" + (at 24.13 300.99 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6a0d0105-6ba2-55c7-a80f-f0b61a4d5dd3") + ) + (wire + (pts + (xy 26.67 306.07) + (xy 24.13 306.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1875b396-ea8d-5c72-af6b-bfdadd5fe011") + ) + (label "DRV_EN" + (at 24.13 306.07 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "888ad661-a034-5263-85fc-2e8561f2fcd4") + ) + (wire + (pts + (xy 26.67 308.61) + (xy 24.13 308.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "bcdbfa22-fe30-570a-88c1-72befaf21772") + ) + (label "X_STEP" + (at 24.13 308.61 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4796f780-e56b-54d0-af41-f7fae06c6dd0") + ) + (wire + (pts + (xy 26.67 311.15) + (xy 24.13 311.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "88d940d1-0e77-54f3-b566-637efc3b83db") + ) + (label "X_DIR" + (at 24.13 311.15 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "028aafbd-58a0-53bc-a903-ecc3f3a92cbe") + ) + (wire + (pts + (xy 26.67 316.23) + (xy 24.13 316.23) + ) + (stroke + (width 0) + (type default) + ) + (uuid "09382552-4f70-5831-beda-01d2d284d841") + ) + (label "+3V3" + (at 24.13 316.23 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "45d03cf6-646a-5cc6-8a3f-cd377b6a1707") + ) + (wire + (pts + (xy 26.67 318.77) + (xy 24.13 318.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b6303a16-0439-518c-b7e2-4579b55aad9a") + ) + (label "+3V3" + (at 24.13 318.77 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2d4cd69f-aef5-52a9-989c-c2b3885e7035") + ) + (wire + (pts + (xy 26.67 321.31) + (xy 24.13 321.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c2ebbd86-c96a-50c0-b45b-80c8fa8fbf96") + ) + (label "+3V3" + (at 24.13 321.31 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e588cbd8-d3f6-51df-954e-0e212a8b502d") + ) + (wire + (pts + (xy 36.83 290.83) + (xy 36.83 288.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "914714bb-12b9-5c80-bbdd-110f6a3b5d63") + ) + (label "+3V3" + (at 36.83 288.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "74da9ca8-293c-5add-bbc0-e8b6d840771c") + ) + (wire + (pts + (xy 36.83 328.93) + (xy 36.83 331.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a17d5e7e-a481-5e75-b53f-848a60cefc3c") + ) + (label "GND" + (at 36.83 331.47 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e9792bbb-6b32-504e-902d-712f370bc7f8") + ) + (wire + (pts + (xy 41.91 290.83) + (xy 41.91 288.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d00c84c8-a01e-5305-8d7c-d9bf22a59cbf") + ) + (label "+12V" + (at 41.91 288.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0f440a7d-f436-55d5-8db2-1b024cc12ce9") + ) + (wire + (pts + (xy 41.91 328.93) + (xy 41.91 331.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9a87ac04-2fd9-5d11-8c7c-b137fd1e1ce0") + ) + (label "GND" + (at 41.91 331.47 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "14f87379-b882-5b5f-a37c-ecf70497f616") + ) + (wire + (pts + (xy 49.53 306.07) + (xy 52.07 306.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dd3a8ddd-933d-5105-af10-051c3d1a1c45") + ) + (label "X_1B" + (at 52.07 306.07 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f100b6cb-88ef-5cb5-95ab-6b3da2d9c1b5") + ) + (wire + (pts + (xy 49.53 308.61) + (xy 52.07 308.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "eecf81d9-a140-5502-a157-edf165020926") + ) + (label "X_1A" + (at 52.07 308.61 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9f6d60e7-5d19-5e90-b63a-57e590be8411") + ) + (wire + (pts + (xy 49.53 311.15) + (xy 52.07 311.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7ac172e8-7c4c-5695-8e4d-14d3c39fbc5b") + ) + (label "X_2A" + (at 52.07 311.15 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "cceee034-a06f-5efa-af36-c1036818cdc3") + ) + (wire + (pts + (xy 49.53 313.69) + (xy 52.07 313.69) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8d2eccab-45c9-5e19-b81f-b967831649bd") + ) + (label "X_2B" + (at 52.07 313.69 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4ea115bd-a3fc-5db6-adc0-16319903da54") + ) + (wire + (pts + (xy 115.57 298.45) + (xy 113.03 298.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "63092c3c-6256-5950-ac8e-180c1cb0c520") + ) + (label "+3V3" + (at 113.03 298.45 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "aac2f87f-3c45-5b06-8223-6b9411ab53be") + ) + (wire + (pts + (xy 115.57 300.99) + (xy 113.03 300.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b591dd6f-1e3d-57c9-be0a-ae95db4cef7b") + ) + (label "+3V3" + (at 113.03 300.99 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d9dd48da-70a1-51ca-9f75-541cbefae388") + ) + (wire + (pts + (xy 115.57 306.07) + (xy 113.03 306.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3ea02846-2abf-52fb-ad73-ebf52752351b") + ) + (label "DRV_EN" + (at 113.03 306.07 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c31749aa-7575-53fb-8539-ed894439be78") + ) + (wire + (pts + (xy 115.57 308.61) + (xy 113.03 308.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8271d037-e101-5b9d-8cbb-ca56259c34a2") + ) + (label "Y_STEP" + (at 113.03 308.61 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a683ff28-e439-54f9-92ad-45e14db2c5cf") + ) + (wire + (pts + (xy 115.57 311.15) + (xy 113.03 311.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4d0e06ab-1916-57dc-aa59-f401efa75e39") + ) + (label "Y_DIR" + (at 113.03 311.15 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "74f9b2af-8fb0-59c8-8b9e-bc2634755dfb") + ) + (wire + (pts + (xy 115.57 316.23) + (xy 113.03 316.23) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3f2d9980-5211-526e-94dc-6661625cb87d") + ) + (label "+3V3" + (at 113.03 316.23 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "335bffad-4fe3-50d5-872f-268a9008f456") + ) + (wire + (pts + (xy 115.57 318.77) + (xy 113.03 318.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ed22f5c6-bbb8-5517-8913-a496f5bda448") + ) + (label "+3V3" + (at 113.03 318.77 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f5817d2a-1479-5291-bbca-2663b6877120") + ) + (wire + (pts + (xy 115.57 321.31) + (xy 113.03 321.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b61bffb1-2fe2-5674-b74f-6f2a7ea7617b") + ) + (label "+3V3" + (at 113.03 321.31 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "79a756a8-fc99-51a8-ad13-fa4f9df240e9") + ) + (wire + (pts + (xy 125.73 290.83) + (xy 125.73 288.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "388feebf-702d-50ed-bed9-93393415de4f") + ) + (label "+3V3" + (at 125.73 288.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "701fbb5d-894f-5cd2-81a8-309ac3262ccc") + ) + (wire + (pts + (xy 125.73 328.93) + (xy 125.73 331.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "637c4d68-c9e4-526b-b06f-38e96c5d1045") + ) + (label "GND" + (at 125.73 331.47 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ebe72df5-ff0d-54ef-afe8-cb7871bdd745") + ) + (wire + (pts + (xy 130.81 290.83) + (xy 130.81 288.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a24cc895-933a-5ca4-8912-f4a22f444c89") + ) + (label "+12V" + (at 130.81 288.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0a5baf2f-602b-5ccf-afc6-400851a71d0a") + ) + (wire + (pts + (xy 130.81 328.93) + (xy 130.81 331.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d36f8e3f-7e79-5e60-83ff-6d89d9aac6a1") + ) + (label "GND" + (at 130.81 331.47 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "64d96e5a-546b-52cf-ae23-7642e706ce05") + ) + (wire + (pts + (xy 138.43 306.07) + (xy 140.97 306.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fe585503-158e-512a-be56-291492ae1c40") + ) + (label "Y_1B" + (at 140.97 306.07 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c538c94d-a313-55fb-bfa4-350133726766") + ) + (wire + (pts + (xy 138.43 308.61) + (xy 140.97 308.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6e0f52f2-f614-5389-b74d-94f48c2811d4") + ) + (label "Y_1A" + (at 140.97 308.61 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a59b0e6a-f086-5a90-9f78-ed46582fe766") + ) + (wire + (pts + (xy 138.43 311.15) + (xy 140.97 311.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ebab6bee-198d-5580-ae4a-669764be92d0") + ) + (label "Y_2A" + (at 140.97 311.15 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c096026b-8023-5b68-aff8-f67289b15f54") + ) + (wire + (pts + (xy 138.43 313.69) + (xy 140.97 313.69) + ) + (stroke + (width 0) + (type default) + ) + (uuid "36f53ad5-22e4-58cd-8a3b-c94ea0b56c88") + ) + (label "Y_2B" + (at 140.97 313.69 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9d4b9f8f-0583-5b2d-9a6b-f504f3542970") + ) + (wire + (pts + (xy 30.48 34.29) + (xy 33.02 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "285630b8-1a12-5edc-bfaa-666d41c689d7") + ) + (label "VIN_RAW" + (at 33.02 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "41d6339f-fea5-535c-91dd-7ca473c5cdf7") + ) + (wire + (pts + (xy 30.48 39.37) + (xy 33.02 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3ebb8b51-dfe6-5c3d-8348-d3648406c91e") + ) + (label "GND" + (at 33.02 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "cc5e5835-2072-51f0-bd4b-ada783e21836") + ) + (wire + (pts + (xy 20.32 165.1) + (xy 20.32 167.64) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a6d724de-fc59-53af-ad2a-c2280438bdf1") + ) + (label "GND" + (at 20.32 167.64 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d7c8f541-3ced-552b-abd6-ce6fc38cbec0") + ) + (wire + (pts + (xy 27.94 165.1) + (xy 27.94 167.64) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b3fa874c-555a-52a1-ba22-7503c5a78ac5") + ) + (label "GND" + (at 27.94 167.64 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "40d367c4-8a7a-5684-99c8-50d1d5c844cb") + ) + (wire + (pts + (xy 43.18 127) + (xy 45.72 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "85c06a6c-20de-5ee9-aaaa-8efa89953442") + ) + (label "VBUS" + (at 45.72 127 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "33d0a12b-ed91-52a3-bfe5-ddf71b3f6985") + ) + (wire + (pts + (xy 43.18 132.08) + (xy 45.72 132.08) + ) + (stroke + (width 0) + (type default) + ) + (uuid "74c58708-696f-5e55-92a8-88191af5c46a") + ) + (label "CC1" + (at 45.72 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d61fb12e-575a-58ea-b1d7-ba1561896225") + ) + (wire + (pts + (xy 43.18 134.62) + (xy 45.72 134.62) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c8121594-e5e4-5825-b211-16babb534917") + ) + (label "CC2" + (at 45.72 134.62 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "777124c7-fac3-5e5f-8abb-e12881a513b5") + ) + (wire + (pts + (xy 43.18 139.7) + (xy 45.72 139.7) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c69e2910-9ce0-5424-85e5-6810215e5249") + ) + (label "USB_DM" + (at 45.72 139.7 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "38e19b47-f9bb-5dae-9dff-e3ed48997d5e") + ) + (wire + (pts + (xy 43.18 142.24) + (xy 45.72 142.24) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0b5e6f0a-e257-57d5-8203-d2eeff02290f") + ) + (label "USB_DM" + (at 45.72 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "073e0f18-acb4-5c0b-a1ac-2ca7de6958f0") + ) + (wire + (pts + (xy 43.18 144.78) + (xy 45.72 144.78) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0126e622-630e-5d1c-90ea-2b11ee895fad") + ) + (label "USB_DP" + (at 45.72 144.78 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "80c8c39f-a212-5238-8714-39ca970cf9b2") + ) + (wire + (pts + (xy 43.18 147.32) + (xy 45.72 147.32) + ) + (stroke + (width 0) + (type default) + ) + (uuid "712a0290-63c1-5ca9-8a1c-ac829e41a138") + ) + (label "USB_DP" + (at 45.72 147.32 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "b90c4dc0-50cc-5e6a-9668-89eaf14980bb") + ) + (no_connect + (at 43.18 154.94) + (uuid "6ca95355-0b77-5fae-8f30-ec5d7a641d43") + ) + (no_connect + (at 43.18 157.48) + (uuid "8fe86768-10ef-56a1-aeba-3eba56da0d6e") + ) + (wire + (pts + (xy 90.17 285.75) + (xy 87.63 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "36073929-114f-54cb-ae66-ebff42cb4c2f") + ) + (label "X_1A" + (at 87.63 285.75 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5c372123-7fa7-58e2-8035-29507895cead") + ) + (wire + (pts + (xy 90.17 288.29) + (xy 87.63 288.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b1dfcc39-8122-58f0-b5f8-cd587e1afb03") + ) + (label "X_1B" + (at 87.63 288.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "09f5a43c-2d32-52af-bbed-e22cb88baa28") + ) + (wire + (pts + (xy 90.17 290.83) + (xy 87.63 290.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5c690d74-3646-504f-b49e-8ff4728388be") + ) + (label "X_2A" + (at 87.63 290.83 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "779c5e39-eb97-5715-ad83-678dae024b07") + ) + (wire + (pts + (xy 90.17 293.37) + (xy 87.63 293.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b8556497-7cf2-59a0-be35-5d5a158595a6") + ) + (label "X_2B" + (at 87.63 293.37 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "24705d1a-ff12-5248-a061-eed29d69cb3d") + ) + (wire + (pts + (xy 177.8 285.75) + (xy 175.26 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "22dcdd59-4858-53f6-9da9-88c3ec0af478") + ) + (label "Y_1A" + (at 175.26 285.75 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "14eb7834-b609-5c40-87b0-f348cb14797c") + ) + (wire + (pts + (xy 177.8 288.29) + (xy 175.26 288.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3cce3d37-9f6a-5376-a262-a49f6f58f6b2") + ) + (label "Y_1B" + (at 175.26 288.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4623cd96-5118-54c8-a41f-26c6f25c73e1") + ) + (wire + (pts + (xy 177.8 290.83) + (xy 175.26 290.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8e335d9e-81d3-5005-99a0-b2b1cc4ceae8") + ) + (label "Y_2A" + (at 175.26 290.83 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "317ea1f0-0bd9-5697-ae7c-950be134208c") + ) + (wire + (pts + (xy 177.8 293.37) + (xy 175.26 293.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a70a423b-b735-5a9b-be44-aacb306baf12") + ) + (label "Y_2B" + (at 175.26 293.37 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "acf90fb6-3958-5d9a-99f2-c7f5aa469e2e") + ) + (wire + (pts + (xy 422.91 34.29) + (xy 420.37 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "382b1290-c4c9-55f1-ba25-c299efe5a27b") + ) + (label "+3V3" + (at 420.37 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e81b6694-4b6e-5f90-b69c-17140cb58c9a") + ) + (wire + (pts + (xy 422.91 36.83) + (xy 420.37 36.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "56c603fa-82b4-553e-b349-250f054a5558") + ) + (label "HOME_RAW" + (at 420.37 36.83 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "54e79fb0-4d43-503c-aab0-d140183e73b2") + ) + (wire + (pts + (xy 422.91 39.37) + (xy 420.37 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "60eca482-5ee8-5020-9a0a-62e3199c7b06") + ) + (label "GND" + (at 420.37 39.37 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c61d8304-e958-5d34-b8f2-7901d154a4b6") + ) + (wire + (pts + (xy 488.95 34.29) + (xy 486.41 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4beb09b4-9ea2-5f08-8ea9-f51afde91e5c") + ) + (label "+5V" + (at 486.41 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "1d81383e-4e4b-59c9-a09e-0584a0919af2") + ) + (wire + (pts + (xy 488.95 36.83) + (xy 486.41 36.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7e759555-c22c-5f8c-9478-582ef62c9a46") + ) + (label "HALL_RAW" + (at 486.41 36.83 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "1bfd61f7-4fe3-5885-ab86-1bfefdcd425d") + ) + (wire + (pts + (xy 488.95 39.37) + (xy 486.41 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "83f532cc-e449-5d29-8e6d-1eaeefad58ad") + ) + (label "GND" + (at 486.41 39.37 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "fba92ac3-742c-5de6-b02e-3d74be329d8e") + ) + (wire + (pts + (xy 510.54 72.39) + (xy 508 72.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "04dccbf6-afd7-5261-9ccf-767fd586bfc7") + ) + (label "+5V" + (at 508 72.39 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3ddb4e33-ed56-530c-a31b-938a7a589ce2") + ) + (wire + (pts + (xy 510.54 74.93) + (xy 508 74.93) + ) + (stroke + (width 0) + (type default) + ) + (uuid "bfce2506-9434-5f29-a932-a491d4683ef2") + ) + (label "LED_DOUT" + (at 508 74.93 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "460210df-b4a3-5bf6-b615-0cc1fa22543b") + ) + (wire + (pts + (xy 510.54 77.47) + (xy 508 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5a33d509-1904-5ed5-a404-9f3068b5e8fd") + ) + (label "GND" + (at 508 77.47 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6ad1fd2f-eb37-58db-a24b-646ef31ff886") + ) + (wire + (pts + (xy 538.48 72.39) + (xy 535.94 72.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c4b9bfbb-acbe-53ca-b83b-dcec6eb5b4dc") + ) + (label "+3V3" + (at 535.94 72.39 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c523da5a-7c62-5ecd-9551-0182b02dbffc") + ) + (wire + (pts + (xy 538.48 74.93) + (xy 535.94 74.93) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5fa3b399-badc-51ec-abfe-463e005fa616") + ) + (label "EXP_IO32" + (at 535.94 74.93 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "dd8ea91f-e8f2-54cd-9b70-239e7f050563") + ) + (wire + (pts + (xy 538.48 77.47) + (xy 535.94 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dabada47-d8f1-524d-be4c-6d47679c1f18") + ) + (label "EXP_IO25" + (at 535.94 77.47 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "cf6448e5-e975-5d6d-b0e3-adb54478cba4") + ) + (wire + (pts + (xy 538.48 80.01) + (xy 535.94 80.01) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ad8e4ddb-80d9-5ba4-9a22-4024767ffca5") + ) + (label "GND" + (at 535.94 80.01 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "53c64c89-73e0-5cfd-8ca8-88e5ea1ce0f8") + ) + (wire + (pts + (xy 60.96 34.29) + (xy 58.42 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "38f3a623-643b-52e9-8f9e-68fd255208df") + ) + (label "+12V" + (at 58.42 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "fb505579-8d2b-5c53-a23b-ce1ad91820f6") + ) + (wire + (pts + (xy 68.58 34.29) + (xy 71.12 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9718d108-b4a3-5470-9066-4e839ed8be78") + ) + (label "VIN_RAW" + (at 71.12 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "edba8681-a983-5cb6-b6b4-464bcc768313") + ) + (wire + (pts + (xy 172.72 34.29) + (xy 170.18 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fed927bb-4fae-55da-b961-d0c03d6abbe2") + ) + (label "+5V" + (at 170.18 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "fe7daf72-495c-500f-94f6-e6f39b32df2d") + ) + (wire + (pts + (xy 180.34 34.29) + (xy 182.88 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3bf3b79f-6947-551c-a620-de5dc5419a02") + ) + (label "+5V_REG" + (at 182.88 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "44180141-039c-573e-ae38-a363454da817") + ) + (wire + (pts + (xy 92.71 125.73) + (xy 90.17 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7cd1bdac-16c0-5dfe-98f2-36d23a161a82") + ) + (label "+5V" + (at 90.17 125.73 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e4a5a2d3-7fd2-5ddf-ba06-e8ea1f7180ce") + ) + (wire + (pts + (xy 100.33 125.73) + (xy 102.87 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2df657d4-26f5-5f72-b74a-d9c8d8520676") + ) + (label "VBUS" + (at 102.87 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "fbcb992a-b99c-543d-9ad2-26a9916baad2") + ) + (wire + (pts + (xy 236.22 227.33) + (xy 233.68 227.33) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f260f8f1-9f98-57e4-9cdf-0699b9c53733") + ) + (label "GND" + (at 233.68 227.33 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "63655738-88bc-5801-93fa-3afa5713c6f9") + ) + (wire + (pts + (xy 243.84 227.33) + (xy 246.38 227.33) + ) + (stroke + (width 0) + (type default) + ) + (uuid "398869ca-de05-5bed-a387-1d66044c86b6") + ) + (label "PWR_A" + (at 246.38 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a8006df4-5013-5692-8630-88cec5e74228") + ) + (wire + (pts + (xy 283.21 227.33) + (xy 280.67 227.33) + ) + (stroke + (width 0) + (type default) + ) + (uuid "689d27ff-6a72-557a-9eda-9a03fd7688a4") + ) + (label "GND" + (at 280.67 227.33 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9e478cb9-a2dd-5b8f-a0a7-443d6065762b") + ) + (wire + (pts + (xy 290.83 227.33) + (xy 293.37 227.33) + ) + (stroke + (width 0) + (type default) + ) + (uuid "bae3e175-79f8-51f3-806d-a6f812cdb46f") + ) + (label "STAT_A" + (at 293.37 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "45c29b10-27e7-5497-ad49-e705a21a1de7") + ) + (wire + (pts + (xy 22.86 191.77) + (xy 20.32 191.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c777926d-3437-5c96-807e-c46a6ccf3313") + ) + (label "Q1B" + (at 20.32 191.77 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0be42af2-3b00-5c09-974d-3101ed27ddde") + ) + (wire + (pts + (xy 30.48 186.69) + (xy 30.48 184.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5a786ff3-dcf9-5df9-9c9c-a8fe7cea181e") + ) + (label "EN" + (at 30.48 184.15 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "53018c2b-c0b6-50cf-9716-a05c1165a551") + ) + (wire + (pts + (xy 30.48 196.85) + (xy 30.48 199.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6fc0270d-1e4a-5d3b-82de-f34d1a4f23c0") + ) + (label "RTS" + (at 30.48 199.39 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ed6f2f91-52f9-5fa6-9fb8-60b640d076f8") + ) + (wire + (pts + (xy 59.69 191.77) + (xy 57.15 191.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c5fa2220-ef4e-51ba-847d-33f14bd7e86b") + ) + (label "Q2B" + (at 57.15 191.77 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2f353fb0-6d03-5ea3-befb-7a698ffb957c") + ) + (wire + (pts + (xy 67.31 186.69) + (xy 67.31 184.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "bd4c69a3-da34-5696-977a-1d9415665e82") + ) + (label "IO0" + (at 67.31 184.15 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "20a1a7d7-77ee-53e0-a346-d27b5c7d51f8") + ) + (wire + (pts + (xy 67.31 196.85) + (xy 67.31 199.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3e05abe8-62fa-5cce-914f-3c8c69b73970") + ) + (label "DTR" + (at 67.31 199.39 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "366af8a5-c811-582d-934b-d7d58742e8d6") + ) + (wire + (pts + (xy 326.39 127) + (xy 323.85 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "949c2e01-ca99-583c-b922-6905c9c2e8d9") + ) + (label "EN" + (at 323.85 127 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8f576857-fc53-581d-b9d3-b86647f4dfcc") + ) + (wire + (pts + (xy 336.55 127) + (xy 339.09 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ab99adfe-06e8-5a90-bcbb-37a0e4fd0d24") + ) + (label "GND" + (at 339.09 127 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5f76891e-3ad0-5d0b-83ea-c18be0d8aa3d") + ) + (wire + (pts + (xy 369.57 127) + (xy 367.03 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ab2f8fec-b832-5738-b8ec-37f53f210078") + ) + (label "IO0" + (at 367.03 127 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "be0977c1-5677-5534-a5b8-7321a6b58dca") + ) + (wire + (pts + (xy 379.73 127) + (xy 382.27 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "48e9fcda-f4a5-50da-a474-78c5f2c076fc") + ) + (label "GND" + (at 382.27 127 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "cd921286-56dc-5a58-9dc9-934f91c2d19f") + ) + (wire + (pts + (xy 71.12 288.29) + (xy 71.12 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9b9b9405-4461-5078-8bdd-330d0ebc98d8") + ) + (label "+12V" + (at 71.12 285.75 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9a52adcc-b04b-512a-80ef-0293d726303d") + ) + (wire + (pts + (xy 71.12 295.91) + (xy 71.12 298.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b6e8f3aa-a89e-5a18-b5c2-848688ebc759") + ) + (label "GND" + (at 71.12 298.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "40c7c661-15ea-59c9-859f-5d015f1350c0") + ) + (wire + (pts + (xy 158.75 288.29) + (xy 158.75 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0fad8257-55e7-5899-a797-77dfac4206e5") + ) + (label "+12V" + (at 158.75 285.75 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c56fba7f-1a57-535e-b696-a6d6248ed48e") + ) + (wire + (pts + (xy 158.75 295.91) + (xy 158.75 298.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2c74bc86-0f40-56d4-b98d-b580fe9a9df5") + ) + (label "GND" + (at 158.75 298.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a27171f8-0d85-5591-ac04-e03582c102c2") + ) + (wire + (pts + (xy 91.44 36.83) + (xy 91.44 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9a41340b-361b-543f-8b85-181483c4b2c0") + ) + (label "+12V" + (at 91.44 34.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "6f8d5344-c8c7-5b46-95ed-5bc12de42f5c") + ) + (wire + (pts + (xy 91.44 44.45) + (xy 91.44 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9478f1e4-a37f-5e1a-ac2e-d09332013ef9") + ) + (label "GND" + (at 91.44 46.99 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "84c3e19e-650c-5314-88a9-6cb578381ec0") + ) + (wire + (pts + (xy 151.13 40.64) + (xy 151.13 38.1) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6452c7e5-ddc0-5f70-93ab-b503163d8d58") + ) + (label "+5V_REG" + (at 151.13 38.1 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7c9ce0e8-b103-5d88-81ef-181c6561cfc0") + ) + (wire + (pts + (xy 151.13 48.26) + (xy 151.13 50.8) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9619f5c8-cc59-5b06-bcc1-ea31bf505282") + ) + (label "GND" + (at 151.13 50.8 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e151c72d-f0b8-5db8-94ae-9cc5211e68f7") + ) + (wire + (pts + (xy 340.36 35.56) + (xy 340.36 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b44eb278-3909-5a77-a826-83b21a7e90eb") + ) + (label "+5V" + (at 340.36 33.02 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a1608ecc-b559-5956-b4e4-b8f4d4a97ac0") + ) + (wire + (pts + (xy 340.36 43.18) + (xy 340.36 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4664b9a7-1e5f-5694-958d-92c3fa20703e") + ) + (label "GND" + (at 340.36 45.72 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "90de926b-4b56-5d43-beae-8730791b51d2") + ) + (wire + (pts + (xy 354.33 36.83) + (xy 354.33 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "96d9b56c-2bcb-5ebd-8a3d-513ccea66e8d") + ) + (label "+3V3" + (at 354.33 34.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9e4cee65-7443-59c7-9517-c631f47b6873") + ) + (wire + (pts + (xy 354.33 44.45) + (xy 354.33 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ed2ec075-9938-5e06-960f-3a2ba3d4591d") + ) + (label "GND" + (at 354.33 46.99 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5a9352d3-9e83-54e5-bdc6-3ec011517428") + ) + (wire + (pts + (xy 167.64 128.27) + (xy 167.64 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e303dba1-2896-5848-a3ea-09b205cbabc5") + ) + (label "+3V3" + (at 167.64 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "49b14f2e-e0c5-5782-aa95-49548ef21502") + ) + (wire + (pts + (xy 167.64 135.89) + (xy 167.64 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "520acf1c-2592-592c-8854-192828a9fc5c") + ) + (label "GND" + (at 167.64 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "aee0a5f9-2e93-5205-a90f-c2116332b0e9") + ) + (wire + (pts + (xy 309.88 127) + (xy 309.88 124.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6a712957-2afa-514e-9c72-8d8a337ff31e") + ) + (label "EN" + (at 309.88 124.46 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2c435da1-dc53-5a14-b86e-1b5988ce798a") + ) + (wire + (pts + (xy 309.88 134.62) + (xy 309.88 137.16) + ) + (stroke + (width 0) + (type default) + ) + (uuid "00aaa826-4618-5d26-8d50-a692586eb968") + ) + (label "GND" + (at 309.88 137.16 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e124b0e8-caf1-5469-8ede-8cb97cd8ad3a") + ) + (wire + (pts + (xy 269.24 128.27) + (xy 269.24 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dc0f6651-c2cb-5305-911e-a41e88e00ab4") + ) + (label "+3V3" + (at 269.24 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d47925ff-0bee-507b-9384-a52029640c0d") + ) + (wire + (pts + (xy 269.24 135.89) + (xy 269.24 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9419d5ad-0047-56bf-b328-3e847ed509fd") + ) + (label "GND" + (at 269.24 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "99964031-9999-5304-9721-b42d29da88b8") + ) + (wire + (pts + (xy 283.21 128.27) + (xy 283.21 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "323d65a0-97b1-5279-a151-0ff8b5551717") + ) + (label "+3V3" + (at 283.21 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7f37edb5-7184-5d98-b37e-745fccf2e77f") + ) + (wire + (pts + (xy 283.21 135.89) + (xy 283.21 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "03d0a366-fb75-5975-b1eb-a1bf2467a30e") + ) + (label "GND" + (at 283.21 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9a93878d-4aaf-5157-a8f8-4a48e786a3ea") + ) + (wire + (pts + (xy 466.09 36.83) + (xy 466.09 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "de5a2460-14b6-5ac1-be96-f4045b670961") + ) + (label "HOME" + (at 466.09 34.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "82f69539-2e7d-5351-9d8b-78696732c456") + ) + (wire + (pts + (xy 466.09 44.45) + (xy 466.09 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8f01d78f-16b3-5b3c-a8ac-c840f8c9a820") + ) + (label "GND" + (at 466.09 46.99 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ee597be2-61ca-5e24-acb7-bbdf1233135a") + ) + (wire + (pts + (xy 532.13 36.83) + (xy 532.13 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6690b147-cce2-5842-88cb-3553dff3a115") + ) + (label "HALL" + (at 532.13 34.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "74512159-9d0b-5cb3-b3f4-381fe34972bd") + ) + (wire + (pts + (xy 532.13 44.45) + (xy 532.13 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ba9c1b7b-e15b-5920-b03f-3d665f533054") + ) + (label "GND" + (at 532.13 46.99 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f41a0d92-8f8f-5f3a-98f1-f9a1ada16770") + ) + (wire + (pts + (xy 474.98 73.66) + (xy 474.98 71.12) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f0e44931-4b41-5f74-9d30-02a4da3e9234") + ) + (label "+5V" + (at 474.98 71.12 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "20a8195f-be07-5bc6-b813-ae2864451003") + ) + (wire + (pts + (xy 474.98 81.28) + (xy 474.98 83.82) + ) + (stroke + (width 0) + (type default) + ) + (uuid "cb51ddcf-fc7b-5ba9-aaea-5d2edffbf7c3") + ) + (label "GND" + (at 474.98 83.82 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "75f2b3c2-acbd-57ec-8b77-c16cb8c6ff51") + ) + (wire + (pts + (xy 63.5 127) + (xy 63.5 124.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "29f30e56-042c-5555-8307-5ce8679589cc") + ) + (label "CC1" + (at 63.5 124.46 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "caaab178-a8b7-545f-b40d-ba53b1dde9f6") + ) + (wire + (pts + (xy 63.5 134.62) + (xy 63.5 137.16) + ) + (stroke + (width 0) + (type default) + ) + (uuid "cf2f4989-4bd7-59e7-9bf7-987a4ad89bd6") + ) + (label "GND" + (at 63.5 137.16 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e505c513-7286-5c44-aeaa-b89c5a5320b6") + ) + (wire + (pts + (xy 74.93 127) + (xy 74.93 124.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "62fa1aa1-b256-5d68-8029-f4fa182c36aa") + ) + (label "CC2" + (at 74.93 124.46 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "41ac7da3-2e82-5744-989a-ac98fa298c82") + ) + (wire + (pts + (xy 74.93 134.62) + (xy 74.93 137.16) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dd39fccb-8d17-5707-9f58-1023ea523788") + ) + (label "GND" + (at 74.93 137.16 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3873e2ec-3e83-5cbc-9d59-e8a305e4d796") + ) + (wire + (pts + (xy 43.18 186.69) + (xy 43.18 184.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "40105190-39aa-5f75-8473-9f64ed51c799") + ) + (label "DTR" + (at 43.18 184.15 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "887766e1-30e7-5851-909f-604c214e2035") + ) + (wire + (pts + (xy 43.18 194.31) + (xy 43.18 196.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dada3470-7802-54b7-879d-5573bdfccbc9") + ) + (label "Q1B" + (at 43.18 196.85 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "638f49e7-8acd-523b-b284-5da76e59a8ea") + ) + (wire + (pts + (xy 80.01 186.69) + (xy 80.01 184.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "54c9b76a-f636-5a86-9795-61a5040864b3") + ) + (label "RTS" + (at 80.01 184.15 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "db17d667-bc2f-5d59-9fc7-614543fb1034") + ) + (wire + (pts + (xy 80.01 194.31) + (xy 80.01 196.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4579b782-f0f4-5fdb-baa7-95977065c554") + ) + (label "Q2B" + (at 80.01 196.85 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b7acaca4-3a04-51ea-add4-932d9208096d") + ) + (wire + (pts + (xy 295.91 128.27) + (xy 295.91 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c355e512-5428-5414-8027-19fb9897f2a4") + ) + (label "+3V3" + (at 295.91 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5e5c0a8d-499b-5f3d-b605-4290b30fc045") + ) + (wire + (pts + (xy 295.91 135.89) + (xy 295.91 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2e9ff12d-a30a-52bd-8ca3-6970dc3ae8a2") + ) + (label "EN" + (at 295.91 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9c2a1b41-2f62-5b5b-9bb6-120ebe38fcb3") + ) + (wire + (pts + (xy 353.06 128.27) + (xy 353.06 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "eff3d8ad-0543-5a3d-a6e9-ea7fcce6a07f") + ) + (label "+3V3" + (at 353.06 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "74598f1d-ac1c-5fc2-ab85-6c878de65d6e") + ) + (wire + (pts + (xy 353.06 135.89) + (xy 353.06 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b6f6fced-0663-5511-a6f6-708181d9cf16") + ) + (label "IO0" + (at 353.06 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "99ee6f18-f5b6-5f1d-9c81-7ec610ce9311") + ) + (wire + (pts + (xy 204.47 232.41) + (xy 204.47 229.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "321e26f0-3e2b-5a6c-aa00-b1ec54f89ea9") + ) + (label "+3V3" + (at 204.47 229.87 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1a989f05-b428-5cc5-8896-f1a1ca64d1a1") + ) + (wire + (pts + (xy 204.47 240.03) + (xy 204.47 242.57) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a00042af-0699-5024-b73f-f38a98cb6e9a") + ) + (label "DRV_EN" + (at 204.47 242.57 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "442c66bd-fc99-5e45-b0f0-d3d44653ff00") + ) + (wire + (pts + (xy 440.69 41.91) + (xy 440.69 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4f351d8d-1123-51bd-8a9e-12b9ecac6b39") + ) + (label "+3V3" + (at 440.69 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4b9e2676-8a61-573d-a102-d7042e393cad") + ) + (wire + (pts + (xy 440.69 49.53) + (xy 440.69 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "50ad5744-53ea-5761-b838-44f9c529570e") + ) + (label "HOME_RAW" + (at 440.69 52.07 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c7e3d129-5d58-514e-b2c4-4e85c7c4198e") + ) + (wire + (pts + (xy 452.12 41.91) + (xy 452.12 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fe49d9c1-3d69-5358-b2b3-ecb3a3e31a20") + ) + (label "HOME_RAW" + (at 452.12 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "19422f10-de59-557a-af61-9777f5e07023") + ) + (wire + (pts + (xy 452.12 49.53) + (xy 452.12 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "629519ea-aacc-5af5-b57a-1b54f4e8c97d") + ) + (label "HOME" + (at 452.12 52.07 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5e521f6b-f9e3-5865-96c8-18d6b61d2548") + ) + (wire + (pts + (xy 506.73 41.91) + (xy 506.73 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a7a4c5e3-da0f-525d-9695-be5a7c77d05b") + ) + (label "+3V3" + (at 506.73 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ee71516d-f84c-50c1-8cf1-5830bf10406d") + ) + (wire + (pts + (xy 506.73 49.53) + (xy 506.73 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "15b90c36-6fa2-559f-af00-2c7c047c29d7") + ) + (label "HALL_RAW" + (at 506.73 52.07 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4e07dc89-474b-56d2-9f6a-9b592ee0f082") + ) + (wire + (pts + (xy 519.43 41.91) + (xy 519.43 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d155dade-4d56-5218-af9f-863ebb591121") + ) + (label "HALL_RAW" + (at 519.43 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "fa888f04-d5df-5d84-8196-8c72d644ac31") + ) + (wire + (pts + (xy 519.43 49.53) + (xy 519.43 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "83b5a8e5-fd2d-51b7-842e-f5daa479295e") + ) + (label "HALL" + (at 519.43 52.07 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c38a116f-1873-58c1-9a40-579cf81d1a9f") + ) + (wire + (pts + (xy 487.68 80.01) + (xy 487.68 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2ae1675d-1b79-502d-903c-a6121ffb5a8e") + ) + (label "LED_BUF" + (at 487.68 77.47 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9b81e9b8-7d14-513c-beb6-0da1ee091fb5") + ) + (wire + (pts + (xy 487.68 87.63) + (xy 487.68 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "09268e24-29f5-5731-84ca-7cd2e8c25a99") + ) + (label "LED_DOUT" + (at 487.68 90.17 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0c4cc85d-ddb1-5702-9479-a2300a2855cd") + ) + (wire + (pts + (xy 215.9 231.14) + (xy 215.9 228.6) + ) + (stroke + (width 0) + (type default) + ) + (uuid "31fd1d8a-acde-5630-ad0a-f13f8a4e7506") + ) + (label "+3V3" + (at 215.9 228.6 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "470c8327-3e2d-508b-85fd-04d4864f5dcc") + ) + (wire + (pts + (xy 215.9 238.76) + (xy 215.9 241.3) + ) + (stroke + (width 0) + (type default) + ) + (uuid "716321f7-fcf6-5cc5-baed-9cbfb6b5ff5d") + ) + (label "PWR_A" + (at 215.9 241.3 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c37f1e08-c9f1-53b6-8ca1-64c7d42fd59f") + ) + (wire + (pts + (xy 262.89 232.41) + (xy 262.89 229.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ebb9e4d5-aa71-5768-9703-d29451ebb9a4") + ) + (label "STAT" + (at 262.89 229.87 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "311bb91f-04a7-58e9-8c6b-36d284443282") + ) + (wire + (pts + (xy 262.89 240.03) + (xy 262.89 242.57) + ) + (stroke + (width 0) + (type default) + ) + (uuid "229869ca-f17c-5a1f-bd1b-ed2742c2505e") + ) + (label "STAT_A" + (at 262.89 242.57 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "db2b23a6-2329-5785-b2b2-8fa63437c7d8") + ) + (wire + (pts + (xy 201.93 35.56) + (xy 201.93 38.1) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3fa4b44a-2f87-5ea5-964b-e78c140a27ea") + ) + (label "GND" + (at 201.93 38.1 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "49eca7f5-c687-55ac-bc8f-f7972de532e8") + ) + (wire + (pts + (xy 214.63 35.56) + (xy 214.63 38.1) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4f6c4afd-4076-50a1-a4a7-6f212ea3393e") + ) + (label "+12V" + (at 214.63 38.1 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c7618112-0797-5268-a914-ac0ca74ac092") + ) + (wire + (pts + (xy 226.06 35.56) + (xy 226.06 38.1) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3a33effc-ca87-549d-9fe6-381cd5b81b1f") + ) + (label "+5V" + (at 226.06 38.1 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2f4393cd-13d7-50ff-9f81-208e6f145aa0") + ) + (wire + (pts + (xy 91.44 186.69) + (xy 91.44 189.23) + ) + (stroke + (width 0) + (type default) + ) + (uuid "eed5241b-d760-5bcf-b028-b2c1cb6fe43b") + ) + (label "VBUS" + (at 91.44 189.23 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "434d9bcf-5a99-5c67-953d-99d11e815322") + ) + (symbol + (lib_id "RF_Module:ESP32-WROOM-32E") + (at 229.87 168.91 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "7cd83c1e-c6b7-5a66-a779-e12a7ddc11b2") + (property "Reference" "U1" + (at 229.87 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "ESP32-WROOM-32E-N8" + (at 229.87 207.01 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "RF_Module:ESP32-WROOM-32E" + (at 229.87 168.91 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf" + (at 229.87 168.91 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Wi-Fi MCU module (FluidNC)" + (at 229.87 168.91 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "3" + (uuid "cabe3c67-d181-51c8-a579-4da634f0f1f5") + ) + (pin "4" + (uuid "b1447704-72fc-5aab-bd21-f68f9562d94b") + ) + (pin "5" + (uuid "0ab6f5b4-2035-5686-9c42-ed41182eac21") + ) + (pin "21" + (uuid "946a453a-b6c3-5061-bb19-00469b524246") + ) + (pin "22" + (uuid "167815fe-f9df-50d4-8e3c-a374efdbd21a") + ) + (pin "17" + (uuid "a47deb95-db3d-5ec6-bb9f-d0f83773313b") + ) + (pin "18" + (uuid "6dc1a6b2-2fdd-5e33-8faa-a0ba9c4ad741") + ) + (pin "20" + (uuid "d0bee719-02b7-5c9c-94d3-4972a1f3d69b") + ) + (pin "19" + (uuid "7260d7e6-fce9-5743-91a1-60ec933c7e84") + ) + (pin "32" + (uuid "852d12f1-e491-58a3-8feb-6ae3e915923b") + ) + (pin "2" + (uuid "1e793e77-2821-54cf-9fbe-8f43fe821f08") + ) + (pin "1" + (uuid "986efff7-8612-5b5e-9017-a0c9a0c016c3") + ) + (pin "15" + (uuid "6a6fb2f0-b6c6-5dfb-adc5-00a716c335db") + ) + (pin "38" + (uuid "025fa6fa-0920-53b9-af8d-6e4f5972dea6") + ) + (pin "39" + (uuid "55b7d457-56c2-52aa-96ee-955f8750055b") + ) + (pin "25" + (uuid "e40a22d9-2837-5844-a0a7-457afed941cd") + ) + (pin "35" + (uuid "ccacf902-c81f-50c6-8339-9c6d817af579") + ) + (pin "24" + (uuid "42bb411b-fa66-5d58-a5b5-8250fffa1c27") + ) + (pin "34" + (uuid "68e06555-1aea-5524-8f36-4a27549f054f") + ) + (pin "26" + (uuid "dc6f247e-c246-56e3-b7a5-e09be6c27cc3") + ) + (pin "29" + (uuid "bda3dcda-b316-52f0-bff0-fdd1bf682df3") + ) + (pin "14" + (uuid "ff8cc8dc-6f35-5870-bfd3-eac970687e20") + ) + (pin "16" + (uuid "2ae524b7-bfae-5834-b4a6-217aaa5c2da0") + ) + (pin "13" + (uuid "700c81f1-868b-554f-8f29-966daa753234") + ) + (pin "23" + (uuid "94ed6796-d535-52f9-a9dc-295d464f7e5b") + ) + (pin "27" + (uuid "253e13d1-ac58-5243-9ce1-6506b6986278") + ) + (pin "28" + (uuid "888c4af7-d4e9-5d63-ae7a-f5690c37e814") + ) + (pin "30" + (uuid "ae382182-1dc5-5f9d-bba5-ac17380a23bd") + ) + (pin "31" + (uuid "4c9d9a58-1f81-58c2-ab0a-1584599ab6c4") + ) + (pin "33" + (uuid "e5630f32-fa2c-53fe-aff7-600aa9a48469") + ) + (pin "36" + (uuid "8a2ca766-2b4d-5907-b423-78037a6ba383") + ) + (pin "37" + (uuid "2c4bdae4-17bd-5aed-8daf-d07d0d7a4cc4") + ) + (pin "10" + (uuid "fc2259c6-7348-5ed7-8ffb-637c3ab374f5") + ) + (pin "11" + (uuid "cd883a39-b5b5-517b-a1f8-76c547940e74") + ) + (pin "12" + (uuid "65bae65b-cfbe-5c0c-86f0-4ebef153c541") + ) + (pin "8" + (uuid "537aa53b-32ba-5387-8f77-599ec89eeafa") + ) + (pin "9" + (uuid "58c5805b-d36c-51f5-9546-89e2c3f5d037") + ) + (pin "6" + (uuid "a2d47086-bfc5-50b9-adee-23be10d02f23") + ) + (pin "7" + (uuid "786e5c4e-5661-5a22-842f-6b8385f3566f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "SandTable:CH340C_3V3") + (at 135.89 146.05 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "ae46ffd7-7a16-5ced-a31e-415062575590") + (property "Reference" "U2" + (at 135.89 129.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "CH340C" + (at 135.89 163.83 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" + (at 135.89 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://datasheet.lcsc.com/szlcsc/Jiangsu-Qin-Heng-CH340C_C84681.pdf" + (at 135.89 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB-UART bridge" + (at 135.89 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C84681" + (at 135.89 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "15" + (uuid "f01a25ae-0845-5a46-b2d7-fc96e83209c0") + ) + (pin "5" + (uuid "7e1be3d4-03a1-5612-b475-75150c53d24d") + ) + (pin "6" + (uuid "e408b622-ee02-5a50-91f0-b2f5a0d31ac0") + ) + (pin "7" + (uuid "29b5aaa6-fc56-545b-b2cc-0a555dd37ebc") + ) + (pin "8" + (uuid "d48dac1e-0991-577d-a52a-21ea9304e459") + ) + (pin "16" + (uuid "e0c919e8-c485-5184-86b5-e14657e0cb85") + ) + (pin "4" + (uuid "2ae80079-886b-56a7-8614-73c978dd78a7") + ) + (pin "1" + (uuid "3454e0d4-9678-5fb0-8535-e1f1fab57bc0") + ) + (pin "2" + (uuid "4f732dc3-bcaf-5405-9dd2-ddadf4b01f5f") + ) + (pin "3" + (uuid "81b79c2f-b60c-597a-8ac4-54b28a021d2e") + ) + (pin "9" + (uuid "97fb6747-ae81-5789-b211-10b6d5b73c0e") + ) + (pin "10" + (uuid "61ab5fce-a4bb-5931-8e7c-58ccfbf7a174") + ) + (pin "11" + (uuid "70e387e8-7b72-5973-96c7-5081c9f1491e") + ) + (pin "12" + (uuid "c356325a-ea23-5d58-91f7-813b01ca2b40") + ) + (pin "13" + (uuid "3e89890d-6247-5133-b4b9-bbf0d60d7861") + ) + (pin "14" + (uuid "655319e4-1163-5491-a2ed-6c4db52c57ca") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Regulator_Linear:AMS1117-3.3") + (at 313.69 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d4a02e29-917d-50de-86ba-f0a34c73b816") + (property "Reference" "U3" + (at 313.69 31.115 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "AMS1117-3.3" + (at 313.69 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-223-3_TabPin2" + (at 313.69 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "http://www.advanced-monolithic.com/pdf/ds1117.pdf" + (at 313.69 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "5V -> 3.3V LDO" + (at 313.69 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C6186" + (at 313.69 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "3" + (uuid "267d2553-8474-51c9-bcc2-fa0cafc96d93") + ) + (pin "1" + (uuid "6e1e66c7-1c84-5f55-9f24-d66533015430") + ) + (pin "2" + (uuid "ac737c99-ff5b-53a1-80a9-2ae637da1c4b") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "74xGxx:74AHCT1G125") + (at 438.15 90.17 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "f710d186-b3dd-51fc-8a27-8c527bde241d") + (property "Reference" "U4" + (at 438.15 78.74 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "74AHCT1G125" + (at 438.15 102.87 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23-5" + (at 438.15 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "http://www.ti.com/lit/sg/scyt129e/scyt129e.pdf" + (at 438.15 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "3.3V -> 5V LED data buffer" + (at 438.15 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "2" + (uuid "9f47381b-f3d9-51d5-9b68-fe36cd251921") + ) + (pin "5" + (uuid "abb5c9af-6578-5f82-8870-dc32201689cf") + ) + (pin "3" + (uuid "c78b2a30-a6d2-5063-a9c3-d28d4f5de703") + ) + (pin "1" + (uuid "2e90709a-4520-55f8-ac91-b55c134b3a98") + ) + (pin "4" + (uuid "13d88b4b-8c7a-5f25-96c3-ff2484842d01") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Converter_DCDC:R-785.0-0.5") + (at 120.65 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "eca5d989-b3a9-5315-923f-dbc7574ff14d") + (property "Reference" "PS1" + (at 120.65 31.115 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "R-78E5.0-0.5" + (at 120.65 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT" + (at 120.65 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.recom-power.com/pdf/Innoline/R-78xx-0.5.pdf" + (at 120.65 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "12V -> 5V switching regulator" + (at 120.65 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "9687cc53-ada8-5ac1-9663-41ba5dc4490f") + ) + (pin "2" + (uuid "16435941-5739-5d20-94c0-a74ad194c331") + ) + (pin "3" + (uuid "14f35e33-e7d4-53f4-b7f0-355d3b71d3c1") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "PS1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "SandTable:DRV8825_StepStick") + (at 36.83 308.61 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b3bed31e-4ebe-57b0-8327-9f8ac130ab57") + (property "Reference" "A1" + (at 36.83 289.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "DRV8825 StepStick (theta/spin)" + (at 36.83 331.47 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Module:Pololu_Breakout-16_15.2x20.3mm" + (at 36.83 308.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.pololu.com/product/2980/pictures" + (at 36.83 308.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Stepper driver socket (DRV8825, 1/32 step)" + (at 36.83 308.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "13" + (uuid "9749eef7-e228-53af-ad97-fd6448c0a211") + ) + (pin "14" + (uuid "b917ff62-3eb6-549e-8a87-6813160331e2") + ) + (pin "9" + (uuid "ca13293c-9c30-5653-9a58-060488617ac1") + ) + (pin "15" + (uuid "dc2d7c7c-79d3-5bb9-a36d-8ba9445132ef") + ) + (pin "16" + (uuid "4705f9e1-6925-5e5e-bd93-0e0aa65bcf2c") + ) + (pin "10" + (uuid "fbcb2886-3f97-56a9-a8a4-78c7a61d9f52") + ) + (pin "11" + (uuid "21e2a2ce-37ae-5b70-9cab-a66e09edd86c") + ) + (pin "12" + (uuid "05fe6516-df46-5bde-aa07-8f94b35fa528") + ) + (pin "2" + (uuid "8c6df489-2a97-5433-a22a-3086bf0dfcf1") + ) + (pin "1" + (uuid "e0d3db31-07ad-5d4f-b87c-383330c55dae") + ) + (pin "8" + (uuid "f2cf655d-726e-5227-9b44-25eba2ae28ad") + ) + (pin "7" + (uuid "ab37733f-bafe-5c10-8d92-f5567ba15612") + ) + (pin "3" + (uuid "63bea262-029d-522a-a34d-cb8e96036122") + ) + (pin "4" + (uuid "085ac050-38bf-583e-bb52-6664b0bdb0a6") + ) + (pin "5" + (uuid "1c0bb395-c62b-5f2b-a067-623d9cee81e1") + ) + (pin "6" + (uuid "31293618-8885-5814-80c0-e090190461ae") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "A1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "SandTable:DRV8825_StepStick") + (at 125.73 308.61 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "1a7133b1-be90-5e2d-be8e-8b3325c622d3") + (property "Reference" "A2" + (at 125.73 289.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "DRV8825 StepStick (rho/arm)" + (at 125.73 331.47 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Module:Pololu_Breakout-16_15.2x20.3mm" + (at 125.73 308.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.pololu.com/product/2980/pictures" + (at 125.73 308.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Stepper driver socket (DRV8825, 1/32 step)" + (at 125.73 308.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "13" + (uuid "459de983-671a-546a-a171-8ed1b8e3f817") + ) + (pin "14" + (uuid "02159e15-3d10-5644-86d7-4de1f94d3196") + ) + (pin "9" + (uuid "c048a47d-0c41-5bf3-9e02-25d9e1f24e03") + ) + (pin "15" + (uuid "82538135-be8d-5daf-93d3-c36475af0896") + ) + (pin "16" + (uuid "d9ffa625-daef-5a85-a7c1-d1810ea95424") + ) + (pin "10" + (uuid "ce87ea06-9d69-565d-8e2c-b192d3eb2f82") + ) + (pin "11" + (uuid "3b9358c8-363a-5118-ad28-7df1e924213d") + ) + (pin "12" + (uuid "6bdd121c-a48d-5ae7-bf84-81fb639ef5ad") + ) + (pin "2" + (uuid "a03e84df-f194-5e83-90f6-db56d00f722f") + ) + (pin "1" + (uuid "9389c34c-cef4-5085-b8a3-4da79342cca3") + ) + (pin "8" + (uuid "c3159713-fdeb-569e-9783-c387a6e6208b") + ) + (pin "7" + (uuid "f30eee3b-ee9f-54d7-8eeb-429ba1e1423e") + ) + (pin "3" + (uuid "fbc426d0-5d4f-5398-b862-b9f772ffc45f") + ) + (pin "4" + (uuid "2d6410b1-8d2e-564f-98ac-8aea1611d69d") + ) + (pin "5" + (uuid "f557a0b1-6ec4-5d68-8952-23fcbb84ab1b") + ) + (pin "6" + (uuid "04247b47-e99a-5e9b-b0a3-992e5abe0cf8") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "A2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Barrel_Jack") + (at 22.86 36.83 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "ed0ad194-4212-580e-b303-3998de02f3c1") + (property "Reference" "J1" + (at 22.86 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "12V DC 5.5x2.1" + (at 22.86 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal" + (at 22.86 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 22.86 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Power input" + (at 22.86 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "4791b8f3-8dce-56ae-af56-d8b90ddf2724") + ) + (pin "2" + (uuid "ccc77471-22f3-5d06-90b3-6a9bbd23cb39") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:USB_C_Receptacle_USB2.0_16P") + (at 27.94 142.24 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8d1310f0-9128-5564-a14a-afbf40a99a6e") + (property "Reference" "J2" + (at 27.94 123.19 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "USB-C" + (at 27.94 167.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12" + (at 27.94 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.usb.org/sites/default/files/documents/usb_type-c.zip" + (at 27.94 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Programming / serial" + (at 27.94 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C165948" + (at 27.94 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "S1" + (uuid "97f87968-a5a3-559e-8a48-e948ef7bd402") + ) + (pin "A1" + (uuid "0dc3fcb5-bc64-5963-8ba0-62f59baccdaf") + ) + (pin "A12" + (uuid "8c7b7521-bf66-5873-aa3c-1064cd331a1e") + ) + (pin "B1" + (uuid "25852680-82b2-5300-8bcb-474f8117a627") + ) + (pin "B12" + (uuid "8c7dad0c-9479-583d-a56a-6a04ea797c94") + ) + (pin "A4" + (uuid "b7139929-5e83-5cbb-8dc9-ae62e2c1b21d") + ) + (pin "A9" + (uuid "7e63e297-670e-5e22-9e3d-ca18810e24d5") + ) + (pin "B4" + (uuid "8d87b2fe-85fe-5e84-855f-f1e40094be32") + ) + (pin "B9" + (uuid "21409db9-c397-55d6-a612-dc40c27c225a") + ) + (pin "A5" + (uuid "01fab597-41d5-55c3-86fc-50348b18dc86") + ) + (pin "B5" + (uuid "0f78f8c1-641b-5a93-bebc-5c5b12d835fb") + ) + (pin "A7" + (uuid "d86b4da7-9817-5555-bab9-c8efc646b888") + ) + (pin "B7" + (uuid "f194ef98-0462-58a8-b5af-69e904ac5e34") + ) + (pin "A6" + (uuid "f2f4541f-fa83-5227-86d8-a2cbe763808a") + ) + (pin "B6" + (uuid "daa6c49d-a69a-5087-857b-7ec3a1602c93") + ) + (pin "A8" + (uuid "f0038b06-1eef-5136-a58c-763e83c8094c") + ) + (pin "B8" + (uuid "bd89189c-63c1-5065-b472-2d3d897ddf2b") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 95.25 288.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "708cf780-e089-5de2-8c0f-1543c42c32ca") + (property "Reference" "J3" + (at 95.25 283.21 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SPIN MOTOR" + (at 95.25 297.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (at 95.25 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 95.25 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Theta motor (XH-4, matches motor cable)" + (at 95.25 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C158012" + (at 95.25 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "6e9d100d-9e3c-5cb7-8861-95f5c2253485") + ) + (pin "2" + (uuid "63191441-5ab9-5913-92da-77187bcd0a21") + ) + (pin "3" + (uuid "d9ca8db1-e41d-56b5-be15-c5fc4e0dfe45") + ) + (pin "4" + (uuid "446f60f5-d6ac-5c72-ab33-09f49c6b0540") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 182.88 288.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "2b484b55-795c-57ba-9b9a-6be1442a758d") + (property "Reference" "J4" + (at 182.88 283.21 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "ARM MOTOR" + (at 182.88 297.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (at 182.88 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 182.88 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Rho motor via slip ring" + (at 182.88 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C158012" + (at 182.88 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "1afce8c9-90de-53b0-8d5a-f8921a2ea6c0") + ) + (pin "2" + (uuid "3aa88ce5-140e-5451-91f5-d8b0cc449660") + ) + (pin "3" + (uuid "8787ddff-9a68-5f38-ac50-fad75fe04759") + ) + (pin "4" + (uuid "0d53714f-5d64-509b-9905-27c1b3962891") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 427.99 36.83 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "27bcc6d4-646d-5537-a603-df25b3cb5e89") + (property "Reference" "J5" + (at 427.99 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "HOME SW" + (at 427.99 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (at 427.99 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 427.99 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Rho home switch (via slip ring)" + (at 427.99 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C144394" + (at 427.99 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "c6574826-039d-5125-b3dc-463a094ef929") + ) + (pin "2" + (uuid "345421dd-63df-5938-b21b-d63611466e8f") + ) + (pin "3" + (uuid "6415fdd8-3273-5749-829f-ba6b0aad85d9") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 494.03 36.83 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "549450fb-f2e4-54be-b663-61640c1ecfed") + (property "Reference" "J6" + (at 494.03 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "HALL" + (at 494.03 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (at 494.03 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 494.03 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Optional theta hall sensor (5V)" + (at 494.03 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C144394" + (at 494.03 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "edcde351-1976-587a-ad58-cd51feb26e9f") + ) + (pin "2" + (uuid "0b7d5604-861f-572b-b469-6c60bbe9b9d2") + ) + (pin "3" + (uuid "d2e5ceec-a918-5bc7-adc4-798d2cca081a") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 515.62 74.93 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "0c6ee88d-6318-51af-a4e4-f4a9504c7a87") + (property "Reference" "J7" + (at 515.62 69.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED STRIP" + (at 515.62 81.28 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (at 515.62 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 515.62 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "WS2812B strip (5V, small strips only)" + (at 515.62 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C144394" + (at 515.62 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "8f919a5a-602e-59b6-89da-f871861db46f") + ) + (pin "2" + (uuid "ee0d328a-5eb4-52f3-baf0-af500ddd5bd1") + ) + (pin "3" + (uuid "c848b0c0-6cae-5ddb-a39f-8586559443da") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 543.56 74.93 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "7150e8ae-22e2-5a66-8dc8-eedaf1fca13a") + (property "Reference" "J8" + (at 543.56 69.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "EXPANSION" + (at 543.56 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" + (at 543.56 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 543.56 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "3V3 / IO32 / IO25 / GND" + (at 543.56 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "9f5bb65c-8bfa-599c-9383-b0a6360a7352") + ) + (pin "2" + (uuid "fa830330-8e1a-57bd-932e-ca445ada1d49") + ) + (pin "3" + (uuid "1b917195-2f88-57dc-af74-d33c3fd93da9") + ) + (pin "4" + (uuid "39eeb858-c0c9-5e73-b476-474758f820d9") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 64.77 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "e6f704cd-1a92-526e-8a4f-3b691b41894f") + (property "Reference" "D1" + (at 64.77 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SS34" + (at 64.77 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SMA" + (at 64.77 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 64.77 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Reverse-polarity protection" + (at 64.77 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C8678" + (at 64.77 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "7fd9f4f8-6b61-5d06-907e-818516b2b9c6") + ) + (pin "2" + (uuid "bd8aff15-5fc1-5c34-bce0-8d0d7ceab320") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 176.53 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d00f60b7-51dd-51c1-bd90-f02a1bdf4114") + (property "Reference" "D2" + (at 176.53 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "B5819W" + (at 176.53 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SOD-123" + (at 176.53 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 176.53 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "5V OR-ing (regulator)" + (at 176.53 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C8598" + (at 176.53 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "4fa91f5e-e123-56d7-9a54-8248ca1ffc8e") + ) + (pin "2" + (uuid "6d911c48-3d6f-546e-8868-b1964f742665") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 96.52 125.73 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "dfd2dfe3-ff53-5171-b30b-1664ef15efba") + (property "Reference" "D3" + (at 96.52 123.19 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "B5819W" + (at 96.52 129.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SOD-123" + (at 96.52 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 96.52 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "5V OR-ing (USB)" + (at 96.52 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C8598" + (at 96.52 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "0b346937-ba26-5093-b1b9-3035e0b2bf30") + ) + (pin "2" + (uuid "66faebe4-60c7-53fe-9682-8b278c9440ed") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 240.03 227.33 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d5d115dd-d95a-55f7-b8e6-9d5a871a10c2") + (property "Reference" "D4" + (at 240.03 224.79 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GREEN" + (at 240.03 232.156 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0603_1608Metric" + (at 240.03 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 240.03 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Power LED" + (at 240.03 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C72043" + (at 240.03 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "d08c5489-9253-5db0-81a1-8c295c54ea3b") + ) + (pin "2" + (uuid "46fd2591-a27f-5901-b1d7-cb6c2e3af4fb") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 287.02 227.33 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b832dc67-ac61-5cff-b5d4-6f2d2cdf6f9a") + (property "Reference" "D5" + (at 287.02 224.79 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BLUE" + (at 287.02 232.156 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0603_1608Metric" + (at 287.02 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 287.02 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Status LED (IO2)" + (at 287.02 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C72041" + (at 287.02 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "f2bb8d72-10ed-5444-9cfe-de6d0a66f438") + ) + (pin "2" + (uuid "2e7c37a1-b003-595b-8fa3-7fbd1672eaf3") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Transistor_BJT:MMBT3904") + (at 27.94 191.77 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "11349a74-c0a9-5c21-82e3-92fca14936f5") + (property "Reference" "Q1" + (at 27.94 185.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MMBT3904" + (at 27.94 199.39 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 27.94 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.onsemi.com/pdf/datasheet/pzt3904-d.pdf" + (at 27.94 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Auto-reset (EN)" + (at 27.94 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C20526" + (at 27.94 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "ac8e15d4-baf8-517c-9287-49ade6d40a25") + ) + (pin "3" + (uuid "98e8f091-f10e-5374-81cd-eba0b9efbef3") + ) + (pin "2" + (uuid "606e90a4-389d-50d4-b20e-58b2ed5b14ed") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "Q1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Transistor_BJT:MMBT3904") + (at 64.77 191.77 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "226d855a-ed97-50e3-bc21-c9b8747baaf3") + (property "Reference" "Q2" + (at 64.77 185.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MMBT3904" + (at 64.77 199.39 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 64.77 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.onsemi.com/pdf/datasheet/pzt3904-d.pdf" + (at 64.77 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Auto-reset (IO0)" + (at 64.77 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C20526" + (at 64.77 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "573d2681-2db7-5b42-a639-9b3de3ed72fe") + ) + (pin "3" + (uuid "6780f993-7313-5e8a-9905-8677c8f2880d") + ) + (pin "2" + (uuid "a4611e64-92ed-5cb4-b36f-8d293b516f63") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "Q2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Switch:SW_Push") + (at 331.47 127 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "1abe3ec4-5aa3-51bb-b2c6-96932b03128b") + (property "Reference" "SW1" + (at 331.47 122.682 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "RESET" + (at 331.47 130.048 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Button_Switch_SMD:SW_SPST_B3U-1000P" + (at 331.47 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 331.47 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "EN / reset button" + (at 331.47 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C231329" + (at 331.47 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "cd316512-7b3a-5567-aa4d-409e8eb72eab") + ) + (pin "2" + (uuid "d01787f7-3ccd-5475-bb00-72c849443000") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "SW1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Switch:SW_Push") + (at 374.65 127 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "5cf58b67-333f-5e2a-893e-34255fef1ee7") + (property "Reference" "SW2" + (at 374.65 122.682 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BOOT" + (at 374.65 130.048 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Button_Switch_SMD:SW_SPST_B3U-1000P" + (at 374.65 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 374.65 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "IO0 / boot button" + (at 374.65 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C231329" + (at 374.65 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "b45c0bd5-146f-58da-8b20-d490e1235e45") + ) + (pin "2" + (uuid "d77d8198-dc8b-5d8f-b389-b712626f5f68") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "SW2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 71.12 292.1 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "6e1bc80c-cb62-5987-b5d6-eac62ab087e5") + (property "Reference" "C1" + (at 71.12 287.02 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100uF 25V" + (at 71.12 298.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:CP_Elec_8x10" + (at 71.12 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 71.12 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Theta driver VMOT bulk" + (at 71.12 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "92494368-3f0b-5ad2-b4c8-a32a823f4bb7") + ) + (pin "2" + (uuid "68f93c73-4690-50bd-a32e-b4ee48ce8c33") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 158.75 292.1 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "94674d34-a062-5d75-9308-274f6e8ac33e") + (property "Reference" "C2" + (at 158.75 287.02 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100uF 25V" + (at 158.75 298.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:CP_Elec_8x10" + (at 158.75 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 158.75 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Rho driver VMOT bulk" + (at 158.75 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "54cd2476-bd63-51e6-af38-fcc54680ca9d") + ) + (pin "2" + (uuid "f7bf714d-dcfb-5b20-9c51-fbaa2632cd20") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 91.44 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d8c84f00-0c2b-57fe-925d-6813a5c4e8cf") + (property "Reference" "C3" + (at 91.44 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF 25V" + (at 91.44 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1206_3216Metric" + (at 91.44 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 91.44 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "12V input decoupling" + (at 91.44 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C13585" + (at 91.44 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "eb1f3308-37d9-5d98-b2fc-b0643eca7eb2") + ) + (pin "2" + (uuid "c9fa086c-f3c1-5360-ae8b-0d82df3cde23") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 151.13 44.45 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "a962269d-1c75-523f-beb6-0da18c5d2f18") + (property "Reference" "C4" + (at 151.13 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF 16V" + (at 151.13 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1206_3216Metric" + (at 151.13 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 151.13 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Regulator output" + (at 151.13 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C13585" + (at 151.13 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "fb87a9cb-9eda-5fb0-bdb5-2e88f09add42") + ) + (pin "2" + (uuid "68c98fb2-9ded-50c6-8d49-82910138fa82") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 340.36 39.37 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "f5d22db1-0d75-58c3-aa8d-cdfad0b729e2") + (property "Reference" "C5" + (at 340.36 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF" + (at 340.36 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 340.36 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 340.36 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "LDO input" + (at 340.36 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C15850" + (at 340.36 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "bc6d4488-7067-5ff0-bf93-73a0272f9632") + ) + (pin "2" + (uuid "28906dae-6a02-5e15-a079-8ce3bfc18304") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 354.33 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8db23ce3-3324-5a54-995d-c8e3d38448e2") + (property "Reference" "C6" + (at 354.33 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "22uF" + (at 354.33 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 354.33 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 354.33 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "LDO output" + (at 354.33 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C45783" + (at 354.33 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "b5578a33-d98e-5d64-9933-f34a6826b590") + ) + (pin "2" + (uuid "92207856-24bb-5bb9-bf39-26b1d4533b57") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 167.64 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b44c0a62-31e7-5f22-b0c2-204702902245") + (property "Reference" "C7" + (at 167.64 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 167.64 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 167.64 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 167.64 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "CH340C decoupling" + (at 167.64 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 167.64 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "385addd4-d35a-5c81-a768-31ccfa58d38f") + ) + (pin "2" + (uuid "1191deb5-8dbd-5a7b-8d98-186933965283") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 309.88 130.81 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "18cbfacf-9548-5796-88c0-04204a991c37") + (property "Reference" "C8" + (at 309.88 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1uF" + (at 309.88 137.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 309.88 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 309.88 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "EN reset delay" + (at 309.88 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C15849" + (at 309.88 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "12e659fe-59b6-5314-84d0-b789449570fc") + ) + (pin "2" + (uuid "aee7a620-db46-5c8c-a2b5-7fd031e1759e") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 269.24 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8f9eda86-de49-5f22-8d1d-1eec8a8e48d3") + (property "Reference" "C9" + (at 269.24 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF" + (at 269.24 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 269.24 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 269.24 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "ESP32 bulk decoupling" + (at 269.24 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C15850" + (at 269.24 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "e3e55320-b1e7-5d30-96e4-c538f4c3c889") + ) + (pin "2" + (uuid "703becb8-df33-50a6-bd45-000b969eef8b") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 283.21 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "eef2da2b-6409-51d5-a615-8a0b429293e3") + (property "Reference" "C10" + (at 283.21 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 283.21 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 283.21 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 283.21 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "ESP32 decoupling" + (at 283.21 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 283.21 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "6f7f9556-9e04-5a3b-9442-94f153fd3c6c") + ) + (pin "2" + (uuid "4c7d6a24-a6fd-50d0-9aae-9e3ecbce203d") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 466.09 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "00db1c8e-91ac-582c-bc84-a655be0745b8") + (property "Reference" "C13" + (at 466.09 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 466.09 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 466.09 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 466.09 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Home switch filter" + (at 466.09 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 466.09 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "4cf07720-5f1b-5650-adac-082bb9e4efb5") + ) + (pin "2" + (uuid "920325ae-0626-553f-98f8-dc5755e087cd") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C13") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 532.13 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "5ebd8202-e921-5da6-b535-685eaf6f1d8e") + (property "Reference" "C14" + (at 532.13 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 532.13 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 532.13 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 532.13 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Hall filter" + (at 532.13 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 532.13 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "bb522899-e6f1-5a5a-bd72-a49e077f809d") + ) + (pin "2" + (uuid "1b2293cf-51c6-5dac-bf9d-71e00faa0c8e") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C14") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 474.98 77.47 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "25fb3a75-18c1-52bc-bf72-56c946150f28") + (property "Reference" "C15" + (at 474.98 72.39 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 474.98 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 474.98 77.47 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 474.98 77.47 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Buffer decoupling" + (at 474.98 77.47 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 474.98 77.47 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "993b1020-7b5f-508a-bafc-1944d56d719d") + ) + (pin "2" + (uuid "f7ef0c4e-ef2a-5b02-805e-86d83309c29f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C15") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 63.5 130.81 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "a680cbe7-0f52-58fe-8242-a4cefcb892f1") + (property "Reference" "R1" + (at 63.5 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "5.1k" + (at 63.5 137.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 63.5 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 63.5 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB-C CC1 pull-down" + (at 63.5 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C23186" + (at 63.5 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "8bc4f1c6-cfdc-55c3-9092-dbc6481252e9") + ) + (pin "2" + (uuid "b6d94326-1ec6-5b9d-9442-cf29cbd8957d") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 74.93 130.81 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "11b33b9a-df3c-580c-9410-8bcb87c6b59b") + (property "Reference" "R2" + (at 74.93 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "5.1k" + (at 74.93 137.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 74.93 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 74.93 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB-C CC2 pull-down" + (at 74.93 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C23186" + (at 74.93 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "36007000-c31d-5b61-b13d-b15e2f6476ea") + ) + (pin "2" + (uuid "8c46f7ab-92cd-5596-8265-64c88a4330d4") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 43.18 190.5 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "361b6a0c-fdf3-5366-a925-bc3597a8da31") + (property "Reference" "R3" + (at 43.18 185.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 43.18 196.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 43.18 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 43.18 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Q1 base" + (at 43.18 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 43.18 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "a2b6528e-9814-57ce-81de-b1266d582262") + ) + (pin "2" + (uuid "c183ebbc-c7d1-507d-a9c1-3e6c010448dd") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 80.01 190.5 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "95f8ea31-0e5c-5e0f-b4ba-423b07f1ac7c") + (property "Reference" "R4" + (at 80.01 185.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 80.01 196.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 80.01 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 80.01 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Q2 base" + (at 80.01 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 80.01 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "fef59932-e23d-5b64-bdd3-c6eba397e1b5") + ) + (pin "2" + (uuid "9550b160-d176-532f-abc7-0fcf00d8d1b6") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 295.91 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "f0f4b15c-5bad-5c9c-a667-bcf9f833f827") + (property "Reference" "R5" + (at 295.91 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 295.91 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 295.91 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 295.91 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "EN pull-up" + (at 295.91 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 295.91 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "2bc1541a-5333-5ec1-a34d-5939d47cb4be") + ) + (pin "2" + (uuid "c973c829-86c0-5498-b671-3932cebb9978") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 353.06 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b767d7de-5928-5314-aed0-83763e967099") + (property "Reference" "R6" + (at 353.06 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 353.06 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 353.06 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 353.06 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "IO0 pull-up" + (at 353.06 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 353.06 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "bb30581c-7e0b-521d-935f-03f828710c3d") + ) + (pin "2" + (uuid "5bad61d3-1fbc-51ce-993b-577a6ee7947f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 204.47 236.22 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "87628e3d-d60f-5ba2-90a9-e8571c1cee3f") + (property "Reference" "R8" + (at 204.47 231.14 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 204.47 242.57 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 204.47 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 204.47 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Driver enable pull-up (off at boot)" + (at 204.47 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 204.47 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "610b7817-16e5-572c-8da0-61984da2577a") + ) + (pin "2" + (uuid "d6270984-d514-5a1c-a83b-f151a7201b5a") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 440.69 45.72 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "fdca50db-642f-568f-ac2f-0a3fcf029fb9") + (property "Reference" "R9" + (at 440.69 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 440.69 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 440.69 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 440.69 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Home switch pull-up" + (at 440.69 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 440.69 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "e16c758d-2b44-5ef5-8879-c8515e2a79a3") + ) + (pin "2" + (uuid "e2f0026e-82af-5da0-832f-acc737075d61") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 452.12 45.72 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "02b12c82-22e5-5040-b1cb-4f3d13b2e0a0") + (property "Reference" "R10" + (at 452.12 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 452.12 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 452.12 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 452.12 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Home switch series" + (at 452.12 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C21190" + (at 452.12 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "00f83a74-e323-53ef-a856-056f31c22a36") + ) + (pin "2" + (uuid "bfcc1374-769b-5a02-9e8d-444e24317842") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 506.73 45.72 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "57f73b68-632a-5478-b7a9-f190be911688") + (property "Reference" "R11" + (at 506.73 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 506.73 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 506.73 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 506.73 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Hall pull-up" + (at 506.73 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 506.73 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "949f64fd-b7f0-5e55-991b-9cd1ecf86a88") + ) + (pin "2" + (uuid "71a65bd7-1574-5dd5-b0cb-24d447f5a2fa") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R11") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 519.43 45.72 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "11806a6c-034b-55ce-9de9-903f7b99340b") + (property "Reference" "R12" + (at 519.43 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 519.43 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 519.43 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 519.43 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Hall series" + (at 519.43 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C21190" + (at 519.43 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "ac6952a1-fa61-51d4-8cb0-6746197c5e1b") + ) + (pin "2" + (uuid "0336c355-ff65-5cb1-ae32-694342df77a7") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R12") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 487.68 83.82 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "46f59bf6-29cd-5c57-95e3-89e686cca6aa") + (property "Reference" "R13" + (at 487.68 78.74 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "330" + (at 487.68 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 487.68 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 487.68 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "LED data series" + (at 487.68 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C23138" + (at 487.68 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "e10d5fd3-5c60-58e7-ac08-a3aa1abf21b8") + ) + (pin "2" + (uuid "117474eb-38bd-5bdb-afa0-a1113c17e514") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R13") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 215.9 234.95 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "ce7d6208-8a8a-5871-96f1-a5eff454d35c") + (property "Reference" "R14" + (at 215.9 229.87 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 215.9 241.3 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 215.9 234.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 215.9 234.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Power LED" + (at 215.9 234.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C21190" + (at 215.9 234.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "ca626d3e-6df4-549c-ac9e-38b21cbb3ae5") + ) + (pin "2" + (uuid "0fd7bf00-fe24-514d-9c57-40d128eab412") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R14") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 262.89 236.22 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "72f891f8-ee6d-51f4-8966-7c74fc42716c") + (property "Reference" "R15" + (at 262.89 231.14 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 262.89 242.57 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 262.89 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 262.89 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Status LED" + (at 262.89 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C21190" + (at 262.89 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "a0b42435-ba15-5ead-a0cf-02ee0b8b3906") + ) + (pin "2" + (uuid "1aa29683-6b46-5b08-9aa8-81fbc8ad7f7f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R15") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Mechanical:MountingHole") + (at 412.75 260.35 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "a55fb8bf-893f-5507-b859-4affb8349791") + (property "Reference" "H1" + (at 412.75 257.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "M3" + (at 412.75 264.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "MountingHole:MountingHole_3.2mm_M3" + (at 412.75 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 412.75 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Uno hole" + (at 412.75 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "H1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Mechanical:MountingHole") + (at 425.45 260.35 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "036a4b56-52b2-5771-b3c6-5223c9161179") + (property "Reference" "H2" + (at 425.45 257.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "M3" + (at 425.45 264.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "MountingHole:MountingHole_3.2mm_M3" + (at 425.45 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 425.45 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Uno hole" + (at 425.45 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "H2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Mechanical:MountingHole") + (at 438.15 260.35 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "c9f982e9-5ced-5e2b-8969-2804505c7ee4") + (property "Reference" "H3" + (at 438.15 257.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "M3" + (at 438.15 264.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "MountingHole:MountingHole_3.2mm_M3" + (at 438.15 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 438.15 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Uno hole" + (at 438.15 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "H3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Mechanical:MountingHole") + (at 450.85 260.35 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "459d15f8-4315-546a-9288-98ab8f88b4b8") + (property "Reference" "H4" + (at 450.85 257.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "M3" + (at 450.85 264.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "MountingHole:MountingHole_3.2mm_M3" + (at 450.85 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 450.85 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Uno hole" + (at 450.85 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "H4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 201.93 35.56 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board no) + (dnp no) + (uuid "481eaacd-bd92-5b9a-9a16-2d44a811b4d4") + (property "Reference" "#FLG1" + (at 201.93 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 201.93 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 201.93 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 201.93 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 201.93 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "bdfae0fa-4494-58df-9e40-34bf827c791d") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "#FLG1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 214.63 35.56 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board no) + (dnp no) + (uuid "072ff662-0ab2-5367-9546-5902ab84d8dd") + (property "Reference" "#FLG2" + (at 214.63 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 214.63 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 214.63 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 214.63 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 214.63 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "d0936e5d-9634-5140-a262-b0d58e375d56") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "#FLG2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 226.06 35.56 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board no) + (dnp no) + (uuid "1964d4af-e178-5b52-b1e1-04e7c28d37c1") + (property "Reference" "#FLG3" + (at 226.06 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 226.06 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 226.06 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 226.06 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 226.06 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "12a45132-16b7-5d4a-89b8-eb628d74266c") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "#FLG3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 91.44 186.69 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board no) + (dnp no) + (uuid "25446dc6-7154-5a18-981a-6ec09f8f88f1") + (property "Reference" "#FLG4" + (at 91.44 182.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 91.44 189.23 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 91.44 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 91.44 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 91.44 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "62b62b53-fe98-5c3a-83c8-985fa11976e9") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "#FLG4") + (unit 1) + ) + ) + ) + ) + (sheet_instances + (path "/" + (page "1") + ) + ) + (embedded_fonts no) +) diff --git a/pcb/archive/v0.3/kicad/sandtable.kicad_sym b/pcb/archive/v0.3/kicad/sandtable.kicad_sym new file mode 100644 index 0000000..a7ca0e7 --- /dev/null +++ b/pcb/archive/v0.3/kicad/sandtable.kicad_sym @@ -0,0 +1,753 @@ +(kicad_symbol_lib + (version 20241209) + (generator "sandtable-gen") + (generator_version "9.0") + (symbol "CH340C_3V3" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -5.08 13.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "CH340C" + (at 1.27 13.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" + (at -18.542 30.226 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://datasheet.lcsc.com/szlcsc/Jiangsu-Qin-Heng-CH340C_C84681.pdf" + (at -6.604 33.274 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB serial converter, crystal-less, UART, SOIC-16" + (at -1.524 36.068 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "USB UART Serial Converter Interface" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOIC*3.9x9.9mm*P1.27mm*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "CH340C_3V3_0_1" + (rectangle + (start -7.62 12.7) + (end 7.62 -12.7) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "CH340C_3V3_1_1" + (pin input line + (at -10.16 7.62 0) + (length 2.54) + (name "R232" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 2.54 0) + (length 2.54) + (name "UD+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 0 0) + (length 2.54) + (name "UD-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -7.62 -5.08 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -7.62 -7.62 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -2.54 15.24 270) + (length 2.54) + (name "VCC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 15.24 270) + (length 2.54) + (name "V3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -15.24 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 10.16 180) + (length 2.54) + (name "TXD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 7.62 180) + (length 2.54) + (name "RXD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 2.54 180) + (length 2.54) + (name "~{CTS}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 0 180) + (length 2.54) + (name "~{DSR}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 -2.54 180) + (length 2.54) + (name "~{RI}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 -5.08 180) + (length 2.54) + (name "~{DCD}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 -7.62 180) + (length 2.54) + (name "~{DTR}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 -10.16 180) + (length 2.54) + (name "~{RTS}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "DRV8825_StepStick" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "A" + (at -2.54 19.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Pololu_Breakout_A4988" + (at -2.54 16.51 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Footprint" "Module:Pololu_Breakout-16_15.2x20.3mm" + (at 6.985 -19.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.pololu.com/product/2980/pictures" + (at 2.54 -7.62 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Pololu Breakout Board, Stepper Driver A4988" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "Pololu Breakout Board Stepper Driver A4988" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Pololu*Breakout*15.2x20.3mm*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "DRV8825_StepStick_0_1" + (rectangle + (start 10.16 -17.78) + (end -7.62 15.24) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "DRV8825_StepStick_1_1" + (pin input line + (at -10.16 10.16 0) + (length 2.54) + (name "~{RST}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 7.62 0) + (length 2.54) + (name "~{SLP}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 2.54 0) + (length 2.54) + (name "~{EN}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 0 0) + (length 2.54) + (name "STEP" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -2.54 0) + (length 2.54) + (name "DIR" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -7.62 0) + (length 2.54) + (name "M0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -10.16 0) + (length 2.54) + (name "M1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -12.7 0) + (length 2.54) + (name "M2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 17.78 270) + (length 2.54) + (name "VDD/~{FAULT}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -20.32 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 5.08 17.78 270) + (length 2.54) + (name "VMOT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 5.08 -20.32 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 2.54 180) + (length 2.54) + (name "A2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 0 180) + (length 2.54) + (name "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 -2.54 180) + (length 2.54) + (name "B1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 -5.08 180) + (length 2.54) + (name "B2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) +) diff --git a/pcb/archive/v0.3/kicad/sym-lib-table b/pcb/archive/v0.3/kicad/sym-lib-table new file mode 100644 index 0000000..acb2794 --- /dev/null +++ b/pcb/archive/v0.3/kicad/sym-lib-table @@ -0,0 +1,17 @@ +(sym_lib_table + (version 7) + (lib (name "SandTable")(type "KiCad")(uri "${KIPRJMOD}/sandtable.kicad_sym")(options "")(descr "SandTable custom symbols")) + (lib (name "74xGxx")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/74xGxx.kicad_sym")(options "")(descr "")) + (lib (name "Connector")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Connector.kicad_sym")(options "")(descr "")) + (lib (name "Connector_Generic")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Connector_Generic.kicad_sym")(options "")(descr "")) + (lib (name "Converter_DCDC")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Converter_DCDC.kicad_sym")(options "")(descr "")) + (lib (name "Device")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Device.kicad_sym")(options "")(descr "")) + (lib (name "Driver_Motor")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Driver_Motor.kicad_sym")(options "")(descr "")) + (lib (name "Interface_USB")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Interface_USB.kicad_sym")(options "")(descr "")) + (lib (name "Mechanical")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Mechanical.kicad_sym")(options "")(descr "")) + (lib (name "RF_Module")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/RF_Module.kicad_sym")(options "")(descr "")) + (lib (name "Regulator_Linear")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Regulator_Linear.kicad_sym")(options "")(descr "")) + (lib (name "Switch")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Switch.kicad_sym")(options "")(descr "")) + (lib (name "Transistor_BJT")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Transistor_BJT.kicad_sym")(options "")(descr "")) + (lib (name "power")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/power.kicad_sym")(options "")(descr "")) +) diff --git a/pcb/archive/v0.3/pcbway-order/1-gerbers-sandtable-controller-v0.3.zip b/pcb/archive/v0.3/pcbway-order/1-gerbers-sandtable-controller-v0.3.zip new file mode 100644 index 0000000..fe32ed5 Binary files /dev/null and b/pcb/archive/v0.3/pcbway-order/1-gerbers-sandtable-controller-v0.3.zip differ diff --git a/pcb/archive/v0.3/pcbway-order/2-bom-sandtable-controller-v0.3.csv b/pcb/archive/v0.3/pcbway-order/2-bom-sandtable-controller-v0.3.csv new file mode 100644 index 0000000..3d2a064 --- /dev/null +++ b/pcb/archive/v0.3/pcbway-order/2-bom-sandtable-controller-v0.3.csv @@ -0,0 +1,28 @@ +Item #,Designator,Qty,Manufacturer,Mfg Part #,Description / Value,Package / Footprint,Type,Notes +1,U1,1,Espressif,ESP32-WROOM-32E-N8,"Wi-Fi + Bluetooth module, 8 MB flash, PCB antenna",ESP32-WROOM-32E,SMD, +2,U2,1,WCH,CH340C,"USB to UART bridge, SOIC-16",SOIC-16_3.9x9.9mm_P1.27mm,SMD, +3,U3,1,Advanced Monolithic Systems,AMS1117-3.3,"LDO regulator 3.3 V 1 A, SOT-223",SOT-223-3_TabPin2,SMD,Any AMS1117-3.3 equivalent ok +4,U4,1,Texas Instruments,SN74AHCT1G125DBVR,"Single buffer, TTL-level input, SOT-23-5",SOT-23-5,SMD, +5,PS1,1,RECOM,R-78E5.0-0.5,"Switching regulator 5 V 0.5 A, SIP-3",Converter_DCDC_RECOM_R-78E-0.5_THT,Thru-Hole, +6,J1,1,Same Sky (CUI Devices),PJ-063AH,"DC barrel jack, 2.0 mm pin, fits 5.5 x 2.1 mm plugs",BarrelJack_CUI_PJ-063AH_Horizontal,Thru-Hole, +7,J2,1,Korean Hroparts Elec,TYPE-C-31-M-12,"USB-C receptacle, USB 2.0, 16 pin",USB_C_Receptacle_HRO_TYPE-C-31-M-12,SMD, +8,"J3,J4",2,JST,B4B-XH-A(LF)(SN),"XH header, 4 pin, 2.5 mm pitch, vertical",JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,Thru-Hole, +9,"J5,J6,J7",3,JST,B3B-XH-A(LF)(SN),"XH header, 3 pin, 2.5 mm pitch, vertical",JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,Thru-Hole, +10,J8,1,Sullins,PRPC004SAAN-RC,"Male pin header 1 x 4, 2.54 mm pitch, vertical",PinHeader_1x04_P2.54mm_Vertical,Thru-Hole, +11,"A1,A2",4,Sullins,PPTC081LFBN-RC,"Female pin header 1 x 8, 2.54 mm pitch, 8.5 mm tall",Pololu_Breakout-16_15.2x20.3mm,Thru-Hole,2 headers per driver (4 total). Sockets only: the DRV8825 modules are supplied by me +12,D1,1,,SS34,"Schottky diode 40 V 3 A, SMA",D_SMA,SMD,Any brand +13,"D2,D3",2,,B5819W,"Schottky diode 40 V 1 A, SOD-123",D_SOD-123,SMD,Any brand +14,D4,1,,,"LED green, 0603",LED_0603_1608Metric,SMD,Any brand +15,D5,1,,,"LED blue, 0603",LED_0603_1608Metric,SMD,Any brand +16,"Q1,Q2",2,onsemi,MMBT3904LT1G,"NPN transistor 40 V 200 mA, SOT-23",SOT-23,SMD,Any MMBT3904 ok +17,"SW1,SW2",2,Omron,B3U-1000P,"Tactile switch, SMD, 3 x 2.5 mm",SW_SPST_B3U-1000P,SMD, +18,"C1,C2",2,Panasonic,EEE-FK1V101GP,"Aluminium electrolytic capacitor 100 uF 35 V, SMD 8 x 10.2 mm",CP_Elec_8x10,SMD, +19,"C3,C4",2,,,"Ceramic capacitor 10 uF 25 V X5R, 1206",C_1206_3216Metric,SMD,Any brand +20,"C5,C9",2,,,"Ceramic capacitor 10 uF 16 V X5R, 0805",C_0805_2012Metric,SMD,Any brand +21,C6,1,,,"Ceramic capacitor 22 uF 10 V X5R, 0805",C_0805_2012Metric,SMD,Any brand +22,"C7,C10,C13,C14,C15",5,,,"Ceramic capacitor 100 nF 50 V X7R, 0603",C_0603_1608Metric,SMD,Any brand +23,C8,1,,,"Ceramic capacitor 1 uF 16 V X7R, 0603",C_0603_1608Metric,SMD,Any brand +24,"R1,R2",2,,,"Resistor 5.1 k 1%, 0603",R_0603_1608Metric,SMD,Any brand +25,"R3,R4,R5,R6,R8,R9,R11",7,,,"Resistor 10 k 1%, 0603",R_0603_1608Metric,SMD,Any brand +26,"R10,R12,R14,R15",4,,,"Resistor 1 k 1%, 0603",R_0603_1608Metric,SMD,Any brand +27,R13,1,,,"Resistor 330 1%, 0603",R_0603_1608Metric,SMD,Any brand diff --git a/pcb/archive/v0.3/pcbway-order/3-centroid-sandtable-controller-v0.3.csv b/pcb/archive/v0.3/pcbway-order/3-centroid-sandtable-controller-v0.3.csv new file mode 100644 index 0000000..820dddb --- /dev/null +++ b/pcb/archive/v0.3/pcbway-order/3-centroid-sandtable-controller-v0.3.csv @@ -0,0 +1,52 @@ +Designator,Mid X (mm),Mid Y (mm),Layer,Rotation,Value,Footprint +A1,38.100,61.440,Top,270,DRV8825 StepStick (theta/spin),Pololu_Breakout-16_15.2x20.3mm +A2,59.100,61.440,Top,270,DRV8825 StepStick (rho/arm),Pololu_Breakout-16_15.2x20.3mm +C1,24.000,42.340,Top,0,100uF 25V,CP_Elec_8x10 +C2,45.500,42.340,Top,0,100uF 25V,CP_Elec_8x10 +C3,20.500,23.740,Top,0,10uF 25V,C_1206_3216Metric +C4,26.000,23.740,Top,0,10uF 16V,C_1206_3216Metric +C5,59.600,19.340,Top,90,10uF,C_0805_2012Metric +C6,59.600,23.840,Top,90,22uF,C_0805_2012Metric +C7,27.000,20.340,Top,90,100nF,C_0603_1608Metric +C8,54.600,10.640,Top,0,1uF,C_0603_1608Metric +C9,57.500,8.740,Top,90,10uF,C_0805_2012Metric +C10,55.000,8.340,Top,90,100nF,C_0603_1608Metric +C13,61.000,44.840,Top,0,100nF,C_0603_1608Metric +C14,61.000,42.640,Top,0,100nF,C_0603_1608Metric +C15,61.000,33.340,Top,90,100nF,C_0603_1608Metric +D1,16.000,41.340,Top,270,SS34,D_SMA +D2,29.000,28.340,Top,0,B5819W,D_SOD-123 +D3,13.000,23.540,Top,0,B5819W,D_SOD-123 +D4,34.000,33.340,Top,0,GREEN,LED_0603_1608Metric +D5,38.000,33.340,Top,0,BLUE,LED_0603_1608Metric +J1,12.300,38.340,Top,270,12V DC 5.5x2.1,BarrelJack_CUI_PJ-063AH_Horizontal +J2,3.400,19.340,Top,270,USB-C,USB_C_Receptacle_HRO_TYPE-C-31-M-12 +J3,4.500,59.940,Top,270,SPIN MOTOR,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical +J4,76.500,59.940,Top,270,ARM MOTOR,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical +J5,76.500,44.840,Top,270,HOME SW,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical +J6,76.500,33.740,Top,270,HALL,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical +J7,76.500,22.640,Top,270,LED STRIP,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical +J8,77.500,11.340,Top,0,EXPANSION,PinHeader_1x04_P2.54mm_Vertical +PS1,18.000,28.340,Top,0,R-78E5.0-0.5,Converter_DCDC_RECOM_R-78E-0.5_THT +Q1,28.000,16.140,Top,0,MMBT3904,SOT-23 +Q2,28.000,12.140,Top,0,MMBT3904,SOT-23 +R1,11.500,20.590,Top,0,5.1k,R_0603_1608Metric +R2,11.500,17.590,Top,0,5.1k,R_0603_1608Metric +R3,31.000,18.340,Top,90,10k,R_0603_1608Metric +R4,31.000,13.840,Top,90,10k,R_0603_1608Metric +R5,54.600,12.340,Top,0,10k,R_0603_1608Metric +R6,31.000,25.840,Top,0,10k,R_0603_1608Metric +R8,47.000,32.340,Top,0,10k,R_0603_1608Metric +R9,54.000,44.840,Top,0,10k,R_0603_1608Metric +R10,57.500,44.840,Top,0,1k,R_0603_1608Metric +R11,54.000,42.640,Top,0,10k,R_0603_1608Metric +R12,57.500,42.640,Top,0,1k,R_0603_1608Metric +R13,70.000,33.340,Top,90,330,R_0603_1608Metric +R14,34.000,30.840,Top,0,1k,R_0603_1608Metric +R15,38.000,30.840,Top,0,1k,R_0603_1608Metric +SW1,27.500,8.340,Top,0,RESET,SW_SPST_B3U-1000P +SW2,22.000,8.340,Top,0,BOOT,SW_SPST_B3U-1000P +U1,43.000,12.750,Top,180,ESP32-WROOM-32E-N8,ESP32-WROOM-32E +U2,22.000,16.340,Top,0,CH340C,SOIC-16_3.9x9.9mm_P1.27mm +U3,66.000,21.840,Top,0,AMS1117-3.3,SOT-223-3_TabPin2 +U4,65.500,33.340,Top,0,74AHCT1G125,SOT-23-5 diff --git a/pcb/archive/v0.3/pcbway-order/ORDER.md b/pcb/archive/v0.3/pcbway-order/ORDER.md new file mode 100644 index 0000000..28a44c2 --- /dev/null +++ b/pcb/archive/v0.3/pcbway-order/ORDER.md @@ -0,0 +1,51 @@ +# PCBWay order: SandTable Controller v0.3 + +## Files + +| File | Where it goes | +|---|---| +| `1-gerbers-sandtable-controller-v0.3.zip` | PCB order: **Upload Gerber file** | +| `2-bom-sandtable-controller-v0.3.csv` | Assembly order: **BOM file** | +| `3-centroid-sandtable-controller-v0.3.csv` | Assembly order: **Centroid / pick-and-place file** | +| `assembly-top-v0.3.pdf` | Attach if PCBWay asks for an assembly drawing | +| `schematic-v0.3.pdf` | Attach if PCBWay asks for a schematic | + +## PCB settings + +| Setting | Value | +|---|---| +| Board type | Single pieces | +| Size | 80 x 63.34 mm | +| Quantity | 5 (the minimum) | +| Layers | 2 | +| Material | FR-4, TG130-140 | +| Thickness | 1.6 mm | +| Min track / spacing | 6/6 mil | +| Min hole size | 0.3 mm | +| Solder mask / silkscreen | any colour / white | +| Surface finish | HASL lead-free (or ENIG) | +| Via process | Tenting vias | +| Finished copper | 1 oz | +| Product No. | Specify a location (the back of the board has a "WayWayWay" marker for it) | + +## Assembly settings (PCB Assembly quote) + +| Setting | Value | +|---|---| +| Service | Turnkey (PCBWay buys the parts) | +| Assembly side | Top side only | +| Quantity | 1 or 2 (fewer than the 5 bare boards is fine) | +| Unique parts | 27 | +| SMD parts | 41 | +| BGA / QFP parts | 0 | +| Through-hole parts | 12 (10 designators; each driver socket is 2 headers) | +| Accept alternatives | Yes, for lines marked "Any brand" | + +**Note for PCBWay** (paste into the comments box): + +> Please fit the female header sockets for A1 and A2 only. Do not supply the stepper driver modules; I will plug in my own. BOM lines marked "Any brand" may use any equivalent part to the description. Centroid coordinates are in mm, with the origin at the board's bottom-left corner. + +## When PCBWay sends their review +- Check the polarity of C1, C2 (electrolytic), D1-D3 (diodes) and D4, D5 (LEDs) against the + and bar marks in `assembly-top-v0.3.pdf`. +- Check that the ESP32 (U1) antenna end sits at the board edge, over the copper-free area. +- Check that pin 1 of U2, U3 and U4 is at the dot or triangle on the silkscreen. diff --git a/pcb/archive/v0.3/pcbway-order/assembly-top-v0.3.pdf b/pcb/archive/v0.3/pcbway-order/assembly-top-v0.3.pdf new file mode 100644 index 0000000..449b780 Binary files /dev/null and b/pcb/archive/v0.3/pcbway-order/assembly-top-v0.3.pdf differ diff --git a/pcb/archive/v0.3/pcbway-order/schematic-v0.3.pdf b/pcb/archive/v0.3/pcbway-order/schematic-v0.3.pdf new file mode 100644 index 0000000..709db85 Binary files /dev/null and b/pcb/archive/v0.3/pcbway-order/schematic-v0.3.pdf differ diff --git a/pcb/archive/v0.3/sandtable-controller-schematic.pdf b/pcb/archive/v0.3/sandtable-controller-schematic.pdf new file mode 100644 index 0000000..709db85 Binary files /dev/null and b/pcb/archive/v0.3/sandtable-controller-schematic.pdf differ diff --git a/pcb/archive/v0.3/sandtable-controller.step b/pcb/archive/v0.3/sandtable-controller.step new file mode 100644 index 0000000..ffc135e --- /dev/null +++ b/pcb/archive/v0.3/sandtable-controller.step @@ -0,0 +1,63199 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('KiCad electronic assembly'),'2;1'); +FILE_NAME('sandtable-controller.step','2026-10-23T13:05:19',('Pcbnew'),( + 'Kicad'),'Open CASCADE STEP processor 7.6','KiCad to STEP converter' + ,'Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('sandtable-controller 1','sandtable-controller 1','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = SHAPE_REPRESENTATION('',(#11,#15,#19,#23,#27,#31,#35,#39,#43,#47, + #51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111, + #115,#119,#123,#127,#131,#135,#139,#143,#147,#151,#155,#159,#163, + #167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207),#211); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.,0.,0.)); +#13 = DIRECTION('',(0.,0.,1.)); +#14 = DIRECTION('',(1.,0.,-0.)); +#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18); +#16 = CARTESIAN_POINT('',(124.,-121.,1.595)); +#17 = DIRECTION('',(0.,0.,1.)); +#18 = DIRECTION('',(1.,0.,0.)); +#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22); +#20 = CARTESIAN_POINT('',(155.,-155.,1.595)); +#21 = DIRECTION('',(0.,-0.,1.)); +#22 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23 = AXIS2_PLACEMENT_3D('',#24,#25,#26); +#24 = CARTESIAN_POINT('',(161.,-118.5,1.595)); +#25 = DIRECTION('',(0.,0.,1.)); +#26 = DIRECTION('',(1.,0.,0.)); +#27 = AXIS2_PLACEMENT_3D('',#28,#29,#30); +#28 = CARTESIAN_POINT('',(161.,-120.7,1.595)); +#29 = DIRECTION('',(0.,0.,1.)); +#30 = DIRECTION('',(1.,0.,0.)); +#31 = AXIS2_PLACEMENT_3D('',#32,#33,#34); +#32 = CARTESIAN_POINT('',(161.,-130.,1.595)); +#33 = DIRECTION('',(0.,-0.,1.)); +#34 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38); +#36 = CARTESIAN_POINT('',(145.5,-121.,1.595)); +#37 = DIRECTION('',(0.,0.,1.)); +#38 = DIRECTION('',(1.,0.,0.)); +#39 = AXIS2_PLACEMENT_3D('',#40,#41,#42); +#40 = CARTESIAN_POINT('',(120.5,-139.6,1.595)); +#41 = DIRECTION('',(0.,0.,1.)); +#42 = DIRECTION('',(1.,0.,0.)); +#43 = AXIS2_PLACEMENT_3D('',#44,#45,#46); +#44 = CARTESIAN_POINT('',(126.,-139.6,1.595)); +#45 = DIRECTION('',(0.,0.,1.)); +#46 = DIRECTION('',(1.,0.,0.)); +#47 = AXIS2_PLACEMENT_3D('',#48,#49,#50); +#48 = CARTESIAN_POINT('',(159.6,-144.,1.595)); +#49 = DIRECTION('',(0.,-0.,1.)); +#50 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#51 = AXIS2_PLACEMENT_3D('',#52,#53,#54); +#52 = CARTESIAN_POINT('',(159.6,-139.5,1.595)); +#53 = DIRECTION('',(0.,-0.,1.)); +#54 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#55 = AXIS2_PLACEMENT_3D('',#56,#57,#58); +#56 = CARTESIAN_POINT('',(127.,-143.,1.595)); +#57 = DIRECTION('',(0.,-0.,1.)); +#58 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62); +#60 = CARTESIAN_POINT('',(154.6,-152.7,1.595)); +#61 = DIRECTION('',(0.,0.,1.)); +#62 = DIRECTION('',(1.,0.,0.)); +#63 = AXIS2_PLACEMENT_3D('',#64,#65,#66); +#64 = CARTESIAN_POINT('',(157.5,-154.6,1.595)); +#65 = DIRECTION('',(0.,-0.,1.)); +#66 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#67 = AXIS2_PLACEMENT_3D('',#68,#69,#70); +#68 = CARTESIAN_POINT('',(116.,-122.,1.595)); +#69 = DIRECTION('',(-0.,0.,1.)); +#70 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#71 = AXIS2_PLACEMENT_3D('',#72,#73,#74); +#72 = CARTESIAN_POINT('',(129.,-135.,1.595)); +#73 = DIRECTION('',(0.,0.,1.)); +#74 = DIRECTION('',(1.,0.,0.)); +#75 = AXIS2_PLACEMENT_3D('',#76,#77,#78); +#76 = CARTESIAN_POINT('',(113.,-139.8,1.595)); +#77 = DIRECTION('',(0.,0.,1.)); +#78 = DIRECTION('',(1.,0.,0.)); +#79 = AXIS2_PLACEMENT_3D('',#80,#81,#82); +#80 = CARTESIAN_POINT('',(134.,-130.,1.595)); +#81 = DIRECTION('',(0.,0.,1.)); +#82 = DIRECTION('',(1.,0.,0.)); +#83 = AXIS2_PLACEMENT_3D('',#84,#85,#86); +#84 = CARTESIAN_POINT('',(138.,-130.,1.595)); +#85 = DIRECTION('',(0.,0.,1.)); +#86 = DIRECTION('',(1.,0.,0.)); +#87 = AXIS2_PLACEMENT_3D('',#88,#89,#90); +#88 = CARTESIAN_POINT('',(112.3,-125.,1.595)); +#89 = DIRECTION('',(-0.,0.,1.)); +#90 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#91 = AXIS2_PLACEMENT_3D('',#92,#93,#94); +#92 = CARTESIAN_POINT('',(104.5,-103.4,1.595)); +#93 = DIRECTION('',(-0.,0.,1.)); +#94 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#95 = AXIS2_PLACEMENT_3D('',#96,#97,#98); +#96 = CARTESIAN_POINT('',(176.5,-103.4,1.595)); +#97 = DIRECTION('',(-0.,0.,1.)); +#98 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#99 = AXIS2_PLACEMENT_3D('',#100,#101,#102); +#100 = CARTESIAN_POINT('',(176.5,-118.5,1.595)); +#101 = DIRECTION('',(-0.,0.,1.)); +#102 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#103 = AXIS2_PLACEMENT_3D('',#104,#105,#106); +#104 = CARTESIAN_POINT('',(176.5,-129.6,1.595)); +#105 = DIRECTION('',(-0.,0.,1.)); +#106 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110); +#108 = CARTESIAN_POINT('',(176.5,-140.7,1.595)); +#109 = DIRECTION('',(-0.,0.,1.)); +#110 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#111 = AXIS2_PLACEMENT_3D('',#112,#113,#114); +#112 = CARTESIAN_POINT('',(177.5,-152.,1.595)); +#113 = DIRECTION('',(0.,0.,1.)); +#114 = DIRECTION('',(1.,0.,0.)); +#115 = AXIS2_PLACEMENT_3D('',#116,#117,#118); +#116 = CARTESIAN_POINT('',(118.,-135.,1.595)); +#117 = DIRECTION('',(0.,0.,1.)); +#118 = DIRECTION('',(1.,0.,0.)); +#119 = AXIS2_PLACEMENT_3D('',#120,#121,#122); +#120 = CARTESIAN_POINT('',(128.,-147.2,1.595)); +#121 = DIRECTION('',(0.,0.,1.)); +#122 = DIRECTION('',(1.,0.,0.)); +#123 = AXIS2_PLACEMENT_3D('',#124,#125,#126); +#124 = CARTESIAN_POINT('',(128.,-151.2,1.595)); +#125 = DIRECTION('',(0.,0.,1.)); +#126 = DIRECTION('',(1.,0.,0.)); +#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130); +#128 = CARTESIAN_POINT('',(111.5,-142.75,1.595)); +#129 = DIRECTION('',(0.,0.,1.)); +#130 = DIRECTION('',(1.,0.,0.)); +#131 = AXIS2_PLACEMENT_3D('',#132,#133,#134); +#132 = CARTESIAN_POINT('',(157.5,-118.5,1.595)); +#133 = DIRECTION('',(0.,0.,1.)); +#134 = DIRECTION('',(1.,0.,0.)); +#135 = AXIS2_PLACEMENT_3D('',#136,#137,#138); +#136 = CARTESIAN_POINT('',(154.,-120.7,1.595)); +#137 = DIRECTION('',(0.,0.,1.)); +#138 = DIRECTION('',(1.,0.,0.)); +#139 = AXIS2_PLACEMENT_3D('',#140,#141,#142); +#140 = CARTESIAN_POINT('',(157.5,-120.7,1.595)); +#141 = DIRECTION('',(0.,0.,1.)); +#142 = DIRECTION('',(1.,0.,0.)); +#143 = AXIS2_PLACEMENT_3D('',#144,#145,#146); +#144 = CARTESIAN_POINT('',(170.,-130.,1.595)); +#145 = DIRECTION('',(0.,-0.,1.)); +#146 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#147 = AXIS2_PLACEMENT_3D('',#148,#149,#150); +#148 = CARTESIAN_POINT('',(134.,-132.5,1.595)); +#149 = DIRECTION('',(0.,0.,1.)); +#150 = DIRECTION('',(1.,0.,0.)); +#151 = AXIS2_PLACEMENT_3D('',#152,#153,#154); +#152 = CARTESIAN_POINT('',(138.,-132.5,1.595)); +#153 = DIRECTION('',(0.,0.,1.)); +#154 = DIRECTION('',(1.,0.,0.)); +#155 = AXIS2_PLACEMENT_3D('',#156,#157,#158); +#156 = CARTESIAN_POINT('',(111.5,-145.75,1.595)); +#157 = DIRECTION('',(0.,0.,1.)); +#158 = DIRECTION('',(1.,0.,0.)); +#159 = AXIS2_PLACEMENT_3D('',#160,#161,#162); +#160 = CARTESIAN_POINT('',(131.,-145.,1.595)); +#161 = DIRECTION('',(0.,-0.,1.)); +#162 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#163 = AXIS2_PLACEMENT_3D('',#164,#165,#166); +#164 = CARTESIAN_POINT('',(131.,-149.5,1.595)); +#165 = DIRECTION('',(0.,-0.,1.)); +#166 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#167 = AXIS2_PLACEMENT_3D('',#168,#169,#170); +#168 = CARTESIAN_POINT('',(154.6,-151.,1.595)); +#169 = DIRECTION('',(0.,0.,1.)); +#170 = DIRECTION('',(1.,0.,0.)); +#171 = AXIS2_PLACEMENT_3D('',#172,#173,#174); +#172 = CARTESIAN_POINT('',(131.,-137.5,1.595)); +#173 = DIRECTION('',(0.,0.,1.)); +#174 = DIRECTION('',(1.,0.,0.)); +#175 = AXIS2_PLACEMENT_3D('',#176,#177,#178); +#176 = CARTESIAN_POINT('',(147.,-131.,1.595)); +#177 = DIRECTION('',(0.,0.,1.)); +#178 = DIRECTION('',(1.,0.,0.)); +#179 = AXIS2_PLACEMENT_3D('',#180,#181,#182); +#180 = CARTESIAN_POINT('',(154.,-118.5,1.595)); +#181 = DIRECTION('',(0.,0.,1.)); +#182 = DIRECTION('',(1.,0.,0.)); +#183 = AXIS2_PLACEMENT_3D('',#184,#185,#186); +#184 = CARTESIAN_POINT('',(127.5,-155.,1.595)); +#185 = DIRECTION('',(0.,0.,1.)); +#186 = DIRECTION('',(1.,0.,0.)); +#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190); +#188 = CARTESIAN_POINT('',(122.,-155.,1.595)); +#189 = DIRECTION('',(0.,0.,1.)); +#190 = DIRECTION('',(1.,0.,0.)); +#191 = AXIS2_PLACEMENT_3D('',#192,#193,#194); +#192 = CARTESIAN_POINT('',(143.,-150.59,1.595)); +#193 = DIRECTION('',(0.,0.,1.)); +#194 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#195 = AXIS2_PLACEMENT_3D('',#196,#197,#198); +#196 = CARTESIAN_POINT('',(122.,-147.,1.595)); +#197 = DIRECTION('',(0.,0.,1.)); +#198 = DIRECTION('',(1.,0.,0.)); +#199 = AXIS2_PLACEMENT_3D('',#200,#201,#202); +#200 = CARTESIAN_POINT('',(166.,-141.5,1.595)); +#201 = DIRECTION('',(0.,0.,1.)); +#202 = DIRECTION('',(1.,0.,0.)); +#203 = AXIS2_PLACEMENT_3D('',#204,#205,#206); +#204 = CARTESIAN_POINT('',(165.5,-130.,1.595)); +#205 = DIRECTION('',(0.,0.,1.)); +#206 = DIRECTION('',(1.,0.,0.)); +#207 = AXIS2_PLACEMENT_3D('',#208,#209,#210); +#208 = CARTESIAN_POINT('',(0.,0.,0.)); +#209 = DIRECTION('',(0.,0.,1.)); +#210 = DIRECTION('',(1.,0.,-0.)); +#211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#215)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#212,#213,#214)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#212 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#213 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#214 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#215 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#212, + 'distance_accuracy_value','confusion accuracy'); +#216 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#217 = SHAPE_DEFINITION_REPRESENTATION(#218,#224); +#218 = PRODUCT_DEFINITION_SHAPE('','',#219); +#219 = PRODUCT_DEFINITION('design','',#220,#223); +#220 = PRODUCT_DEFINITION_FORMATION('','',#221); +#221 = PRODUCT('CP_Elec_8x10','CP_Elec_8x10','',(#222)); +#222 = PRODUCT_CONTEXT('',#2,'mechanical'); +#223 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#224 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#225),#1588); +#225 = MANIFOLD_SOLID_BREP('',#226); +#226 = CLOSED_SHELL('',(#227,#270,#296,#369,#448,#488,#567,#592,#617, + #673,#729,#754,#779,#844,#917,#1003,#1020,#1051,#1063,#1080,#1092, + #1110,#1122,#1140,#1152,#1183,#1235,#1267,#1292,#1317,#1349,#1374, + #1399,#1416,#1433,#1480,#1520,#1538,#1550,#1562,#1578)); +#227 = ADVANCED_FACE('',(#228),#265,.T.); +#228 = FACE_BOUND('',#229,.T.); +#229 = EDGE_LOOP('',(#230,#249,#257,#264)); +#230 = ORIENTED_EDGE('',*,*,#231,.T.); +#231 = EDGE_CURVE('',#232,#232,#234,.T.); +#232 = VERTEX_POINT('',#233); +#233 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#234 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#235,#236,#237,#238,#239, + #240,#241,#242,#243,#244,#245,#246,#247,#248),.UNSPECIFIED.,.T.,.F.) + B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-25.13274122871, + 4.970488814277E-16,25.132741228718,50.265482457436),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1., + 1.000000000001,0.999999999997,1.000000000006,0.999999999991, + 1.000000000009,0.999999999992,1.000000000006,0.999999999996, +1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') ); +#235 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#236 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822,1.611821953996 + )); +#237 = CARTESIAN_POINT('',(-3.015267027679,3.854580985394,1.611821953996 + )); +#238 = CARTESIAN_POINT('',(-0.988824457305,5.248384513409,1.611821953996 + )); +#239 = CARTESIAN_POINT('',(1.799817736615,5.462446172588,1.611821953996) + ); +#240 = CARTESIAN_POINT('',(4.208872671042,3.976872241641,1.611821953996) + ); +#241 = CARTESIAN_POINT('',(5.97566140596,1.80826619315,1.611821953996)); +#242 = CARTESIAN_POINT('',(5.975661406084,-1.808266193181,1.611821953996 + )); +#243 = CARTESIAN_POINT('',(4.208872670967,-3.976872241588,1.611821953996 + )); +#244 = CARTESIAN_POINT('',(1.79981773664,-5.462446172636,1.611821953996) + ); +#245 = CARTESIAN_POINT('',(-0.988824457304,-5.248384513387, + 1.611821953996)); +#246 = CARTESIAN_POINT('',(-3.015267027683,-3.8545809854,1.611821953996) + ); +#247 = CARTESIAN_POINT('',(-4.,-1.905321418822,1.611821953996)); +#248 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#249 = ORIENTED_EDGE('',*,*,#250,.F.); +#250 = EDGE_CURVE('',#251,#232,#253,.T.); +#251 = VERTEX_POINT('',#252); +#252 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.183333333333)); +#253 = LINE('',#254,#255); +#254 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,0.65)); +#255 = VECTOR('',#256,1.); +#256 = DIRECTION('',(0.,0.,1.)); +#257 = ORIENTED_EDGE('',*,*,#258,.F.); +#258 = EDGE_CURVE('',#251,#251,#259,.T.); +#259 = CIRCLE('',#260,4.); +#260 = AXIS2_PLACEMENT_3D('',#261,#262,#263); +#261 = CARTESIAN_POINT('',(0.,0.,1.183333333333)); +#262 = DIRECTION('',(0.,0.,-1.)); +#263 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#264 = ORIENTED_EDGE('',*,*,#250,.T.); +#265 = CYLINDRICAL_SURFACE('',#266,4.); +#266 = AXIS2_PLACEMENT_3D('',#267,#268,#269); +#267 = CARTESIAN_POINT('',(0.,0.,0.65)); +#268 = DIRECTION('',(0.,0.,1.)); +#269 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#270 = ADVANCED_FACE('',(#271),#291,.T.); +#271 = FACE_BOUND('',#272,.T.); +#272 = EDGE_LOOP('',(#273,#274,#283,#290)); +#273 = ORIENTED_EDGE('',*,*,#258,.T.); +#274 = ORIENTED_EDGE('',*,*,#275,.T.); +#275 = EDGE_CURVE('',#251,#276,#278,.T.); +#276 = VERTEX_POINT('',#277); +#277 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16,0.65)); +#278 = CIRCLE('',#279,0.533333333333); +#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282); +#280 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16, + 1.183333333333)); +#281 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#282 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#283 = ORIENTED_EDGE('',*,*,#284,.F.); +#284 = EDGE_CURVE('',#276,#276,#285,.T.); +#285 = CIRCLE('',#286,3.466666666667); +#286 = AXIS2_PLACEMENT_3D('',#287,#288,#289); +#287 = CARTESIAN_POINT('',(0.,0.,0.65)); +#288 = DIRECTION('',(0.,0.,-1.)); +#289 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#290 = ORIENTED_EDGE('',*,*,#275,.F.); +#291 = TOROIDAL_SURFACE('',#292,3.466666666667,0.533333333333); +#292 = AXIS2_PLACEMENT_3D('',#293,#294,#295); +#293 = CARTESIAN_POINT('',(0.,0.,1.183333333333)); +#294 = DIRECTION('',(0.,0.,-1.)); +#295 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#296 = ADVANCED_FACE('',(#297),#326,.T.); +#297 = FACE_BOUND('',#298,.T.); +#298 = EDGE_LOOP('',(#299,#307,#324,#325)); +#299 = ORIENTED_EDGE('',*,*,#300,.T.); +#300 = EDGE_CURVE('',#232,#301,#303,.T.); +#301 = VERTEX_POINT('',#302); +#302 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#303 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#304,#305,#306), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +25.132741228718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#304 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#305 = CARTESIAN_POINT('',(-4.,1.576662977358E-15,1.648336791163)); +#306 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#307 = ORIENTED_EDGE('',*,*,#308,.T.); +#308 = EDGE_CURVE('',#301,#301,#309,.T.); +#309 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#310,#311,#312,#313,#314, + #315,#316,#317,#318,#319,#320,#321,#322,#323),.UNSPECIFIED.,.T.,.F.) + B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-25.13274122871, + 4.970488814277E-16,25.132741228718,50.265482457436),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1., + 1.000000000001,0.999999999997,1.000000000006,0.999999999991, + 1.000000000009,0.999999999992,1.000000000006,0.999999999996, +1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') ); +#310 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#311 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015,1.651656321814 + )); +#312 = CARTESIAN_POINT('',(-2.987855509242,3.819539340072,1.651656321814 + )); +#313 = CARTESIAN_POINT('',(-0.979835144065,5.200671926925,1.651656321814 + )); +#314 = CARTESIAN_POINT('',(1.783455757207,5.412787571016,1.651656321814) + ); +#315 = CARTESIAN_POINT('',(4.17061019219,3.940718857632,1.651656321814) + ); +#316 = CARTESIAN_POINT('',(5.921337211391,1.791827409569,1.651656321814) + ); +#317 = CARTESIAN_POINT('',(5.921337211452,-1.791827409599,1.651656321814 + )); +#318 = CARTESIAN_POINT('',(4.170610192166,-3.94071885758,1.651656321814) + ); +#319 = CARTESIAN_POINT('',(1.7834557572,-5.412787571063,1.651656321814) + ); +#320 = CARTESIAN_POINT('',(-0.979835144048,-5.200671926903, + 1.651656321814)); +#321 = CARTESIAN_POINT('',(-2.987855509252,-3.819539340077, + 1.651656321814)); +#322 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 1.651656321814)); +#323 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#324 = ORIENTED_EDGE('',*,*,#300,.F.); +#325 = ORIENTED_EDGE('',*,*,#231,.F.); +#326 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#327,#328,#329,#330,#331,#332,#333,#334,#335,#336,#337,#338,#339 + ,#340) + ,(#341,#342,#343,#344,#345,#346,#347,#348,#349,#350,#351,#352,#353 + ,#354) + ,(#355,#356,#357,#358,#359,#360,#361,#362,#363,#364,#365,#366,#367 +,#368 + )),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1, + 13,13,1),(0.,25.132741228718),(-25.13274122871,4.970488814277E-16, + 25.132741228718,50.265482457436),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 + ,1.000000000002,0.999999999999,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945877,0.738548945873 + ,0.738548945881,0.738548945869,0.738548945883,0.738548945869 + ,0.738548945881,0.738548945873,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 +,1.000000000002,0.999999999999,1.,1. + ))) REPRESENTATION_ITEM('') SURFACE() ); +#327 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#328 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822,1.611821953996 + )); +#329 = CARTESIAN_POINT('',(-3.015267027679,3.854580985394,1.611821953996 + )); +#330 = CARTESIAN_POINT('',(-0.988824457305,5.248384513409,1.611821953996 + )); +#331 = CARTESIAN_POINT('',(1.799817736615,5.462446172588,1.611821953996) + ); +#332 = CARTESIAN_POINT('',(4.208872671042,3.976872241641,1.611821953996) + ); +#333 = CARTESIAN_POINT('',(5.97566140596,1.80826619315,1.611821953996)); +#334 = CARTESIAN_POINT('',(5.975661406084,-1.808266193181,1.611821953996 + )); +#335 = CARTESIAN_POINT('',(4.208872670967,-3.976872241588,1.611821953996 + )); +#336 = CARTESIAN_POINT('',(1.79981773664,-5.462446172636,1.611821953996) + ); +#337 = CARTESIAN_POINT('',(-0.988824457304,-5.248384513387, + 1.611821953996)); +#338 = CARTESIAN_POINT('',(-3.015267027683,-3.8545809854,1.611821953996) + ); +#339 = CARTESIAN_POINT('',(-4.,-1.905321418822,1.611821953996)); +#340 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#341 = CARTESIAN_POINT('',(-4.,1.576662977358E-15,1.648336791163)); +#342 = CARTESIAN_POINT('',(-4.000000000002,1.905321418822,1.648336791163 + )); +#343 = CARTESIAN_POINT('',(-3.015267027675,3.854580985394,1.648336791163 + )); +#344 = CARTESIAN_POINT('',(-0.988824457313,5.248384513409,1.648336791163 + )); +#345 = CARTESIAN_POINT('',(1.799817736629,5.462446172589,1.648336791163) + ); +#346 = CARTESIAN_POINT('',(4.208872671023,3.97687224164,1.648336791163) + ); +#347 = CARTESIAN_POINT('',(5.975661405982,1.808266193155,1.648336791163) + ); +#348 = CARTESIAN_POINT('',(5.975661406061,-1.808266193186,1.648336791163 + )); +#349 = CARTESIAN_POINT('',(4.208872670986,-3.976872241584,1.648336791163 + )); +#350 = CARTESIAN_POINT('',(1.799817736628,-5.462446172638,1.648336791163 + )); +#351 = CARTESIAN_POINT('',(-0.988824457298,-5.248384513386, + 1.648336791163)); +#352 = CARTESIAN_POINT('',(-3.015267027685,-3.8545809854,1.648336791163) + ); +#353 = CARTESIAN_POINT('',(-3.999999999999,-1.905321418822, + 1.648336791163)); +#354 = CARTESIAN_POINT('',(-4.,1.576662977358E-15,1.648336791163)); +#355 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#356 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015,1.651656321814 + )); +#357 = CARTESIAN_POINT('',(-2.987855509242,3.819539340072,1.651656321814 + )); +#358 = CARTESIAN_POINT('',(-0.979835144065,5.200671926925,1.651656321814 + )); +#359 = CARTESIAN_POINT('',(1.783455757207,5.412787571016,1.651656321814) + ); +#360 = CARTESIAN_POINT('',(4.17061019219,3.940718857632,1.651656321814) + ); +#361 = CARTESIAN_POINT('',(5.921337211391,1.791827409569,1.651656321814) + ); +#362 = CARTESIAN_POINT('',(5.921337211452,-1.791827409599,1.651656321814 + )); +#363 = CARTESIAN_POINT('',(4.170610192166,-3.94071885758,1.651656321814) + ); +#364 = CARTESIAN_POINT('',(1.7834557572,-5.412787571063,1.651656321814) + ); +#365 = CARTESIAN_POINT('',(-0.979835144048,-5.200671926903, + 1.651656321814)); +#366 = CARTESIAN_POINT('',(-2.987855509252,-3.819539340077, + 1.651656321814)); +#367 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 1.651656321814)); +#368 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#369 = ADVANCED_FACE('',(#370,#440),#443,.T.); +#370 = FACE_BOUND('',#371,.T.); +#371 = EDGE_LOOP('',(#372,#382,#391,#399,#408,#416,#425,#433)); +#372 = ORIENTED_EDGE('',*,*,#373,.T.); +#373 = EDGE_CURVE('',#374,#376,#378,.T.); +#374 = VERTEX_POINT('',#375); +#375 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.65)); +#376 = VERTEX_POINT('',#377); +#377 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.65)); +#378 = LINE('',#379,#380); +#379 = CARTESIAN_POINT('',(-4.15,1.575,0.65)); +#380 = VECTOR('',#381,1.); +#381 = DIRECTION('',(-1.224646799147E-16,-1.,1.245168191405E-33)); +#382 = ORIENTED_EDGE('',*,*,#383,.T.); +#383 = EDGE_CURVE('',#376,#384,#386,.T.); +#384 = VERTEX_POINT('',#385); +#385 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.65)); +#386 = CIRCLE('',#387,4.2); +#387 = AXIS2_PLACEMENT_3D('',#388,#389,#390); +#388 = CARTESIAN_POINT('',(0.,0.,0.65)); +#389 = DIRECTION('',(0.,0.,1.)); +#390 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#391 = ORIENTED_EDGE('',*,*,#392,.T.); +#392 = EDGE_CURVE('',#384,#393,#395,.T.); +#393 = VERTEX_POINT('',#394); +#394 = CARTESIAN_POINT('',(0.646142399166,-4.15,0.65)); +#395 = LINE('',#396,#397); +#396 = CARTESIAN_POINT('',(-1.575,-4.15,0.65)); +#397 = VECTOR('',#398,1.); +#398 = DIRECTION('',(1.,-1.224646799147E-16,-1.863333581871E-33)); +#399 = ORIENTED_EDGE('',*,*,#400,.T.); +#400 = EDGE_CURVE('',#393,#401,#403,.T.); +#401 = VERTEX_POINT('',#402); +#402 = CARTESIAN_POINT('',(4.15,-0.646142399166,0.65)); +#403 = CIRCLE('',#404,4.2); +#404 = AXIS2_PLACEMENT_3D('',#405,#406,#407); +#405 = CARTESIAN_POINT('',(0.,0.,0.65)); +#406 = DIRECTION('',(0.,0.,1.)); +#407 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#408 = ORIENTED_EDGE('',*,*,#409,.T.); +#409 = EDGE_CURVE('',#401,#410,#412,.T.); +#410 = VERTEX_POINT('',#411); +#411 = CARTESIAN_POINT('',(4.15,0.646142399166,0.65)); +#412 = LINE('',#413,#414); +#413 = CARTESIAN_POINT('',(4.15,-2.075,0.65)); +#414 = VECTOR('',#415,1.); +#415 = DIRECTION('',(1.224646799147E-16,1.,-1.245168191405E-33)); +#416 = ORIENTED_EDGE('',*,*,#417,.T.); +#417 = EDGE_CURVE('',#410,#418,#420,.T.); +#418 = VERTEX_POINT('',#419); +#419 = CARTESIAN_POINT('',(0.646142399166,4.15,0.65)); +#420 = CIRCLE('',#421,4.2); +#421 = AXIS2_PLACEMENT_3D('',#422,#423,#424); +#422 = CARTESIAN_POINT('',(0.,0.,0.65)); +#423 = DIRECTION('',(0.,0.,1.)); +#424 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#425 = ORIENTED_EDGE('',*,*,#426,.T.); +#426 = EDGE_CURVE('',#418,#427,#429,.T.); +#427 = VERTEX_POINT('',#428); +#428 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.65)); +#429 = LINE('',#430,#431); +#430 = CARTESIAN_POINT('',(2.075,4.15,0.65)); +#431 = VECTOR('',#432,1.); +#432 = DIRECTION('',(-1.,1.224646799147E-16,1.863333581871E-33)); +#433 = ORIENTED_EDGE('',*,*,#434,.T.); +#434 = EDGE_CURVE('',#427,#374,#435,.T.); +#435 = CIRCLE('',#436,4.2); +#436 = AXIS2_PLACEMENT_3D('',#437,#438,#439); +#437 = CARTESIAN_POINT('',(0.,0.,0.65)); +#438 = DIRECTION('',(0.,0.,1.)); +#439 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#440 = FACE_BOUND('',#441,.T.); +#441 = EDGE_LOOP('',(#442)); +#442 = ORIENTED_EDGE('',*,*,#284,.T.); +#443 = PLANE('',#444); +#444 = AXIS2_PLACEMENT_3D('',#445,#446,#447); +#445 = CARTESIAN_POINT('',(3.25580983938E-16,-1.541304320573E-16,0.65)); +#446 = DIRECTION('',(1.863333581871E-33,1.245168191405E-33,1.)); +#447 = DIRECTION('',(-1.,1.224646799147E-16,1.863333581871E-33)); +#448 = ADVANCED_FACE('',(#449),#479,.F.); +#449 = FACE_BOUND('',#450,.F.); +#450 = EDGE_LOOP('',(#451,#460,#461,#462)); +#451 = ORIENTED_EDGE('',*,*,#452,.F.); +#452 = EDGE_CURVE('',#301,#453,#455,.T.); +#453 = VERTEX_POINT('',#454); +#454 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#455 = CIRCLE('',#456,0.4); +#456 = AXIS2_PLACEMENT_3D('',#457,#458,#459); +#457 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.05)); +#458 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#459 = DIRECTION('',(0.,0.,-1.)); +#460 = ORIENTED_EDGE('',*,*,#308,.T.); +#461 = ORIENTED_EDGE('',*,*,#452,.T.); +#462 = ORIENTED_EDGE('',*,*,#463,.F.); +#463 = EDGE_CURVE('',#453,#453,#464,.T.); +#464 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#465,#466,#467,#468,#469, + #470,#471,#472,#473,#474,#475,#476,#477,#478),.UNSPECIFIED.,.T.,.F.) + B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-25.13274122871, + 4.970488814277E-16,25.132741228718,50.265482457436),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1., + 1.000000000001,0.999999999997,1.000000000006,0.999999999991, + 1.000000000009,0.999999999992,1.000000000006,0.999999999996, +1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') ); +#465 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#466 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015,2.448343678186 + )); +#467 = CARTESIAN_POINT('',(-2.987855509242,3.819539340071,2.448343678186 + )); +#468 = CARTESIAN_POINT('',(-0.979835144066,5.200671926926,2.448343678186 + )); +#469 = CARTESIAN_POINT('',(1.783455757208,5.412787571015,2.448343678186) + ); +#470 = CARTESIAN_POINT('',(4.170610192189,3.940718857633,2.448343678186) + ); +#471 = CARTESIAN_POINT('',(5.921337211392,1.791827409569,2.448343678186) + ); +#472 = CARTESIAN_POINT('',(5.921337211452,-1.791827409599,2.448343678186 + )); +#473 = CARTESIAN_POINT('',(4.170610192165,-3.940718857579,2.448343678186 + )); +#474 = CARTESIAN_POINT('',(1.783455757201,-5.412787571063,2.448343678186 + )); +#475 = CARTESIAN_POINT('',(-0.979835144048,-5.200671926903, + 2.448343678186)); +#476 = CARTESIAN_POINT('',(-2.987855509252,-3.819539340077, + 2.448343678186)); +#477 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 2.448343678186)); +#478 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#479 = SURFACE_OF_REVOLUTION('',#480,#485); +#480 = CIRCLE('',#481,0.4); +#481 = AXIS2_PLACEMENT_3D('',#482,#483,#484); +#482 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.05)); +#483 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#484 = DIRECTION('',(0.,0.,-1.)); +#485 = AXIS1_PLACEMENT('',#486,#487); +#486 = CARTESIAN_POINT('',(0.,0.,0.65)); +#487 = DIRECTION('',(-0.,0.,-1.)); +#488 = ADVANCED_FACE('',(#489),#562,.F.); +#489 = FACE_BOUND('',#490,.F.); +#490 = EDGE_LOOP('',(#491,#501,#509,#517,#523,#524,#532,#540,#548,#556) + ); +#491 = ORIENTED_EDGE('',*,*,#492,.F.); +#492 = EDGE_CURVE('',#493,#495,#497,.T.); +#493 = VERTEX_POINT('',#494); +#494 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#495 = VERTEX_POINT('',#496); +#496 = CARTESIAN_POINT('',(-4.15,0.325,0.15)); +#497 = LINE('',#498,#499); +#498 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#499 = VECTOR('',#500,1.); +#500 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#501 = ORIENTED_EDGE('',*,*,#502,.T.); +#502 = EDGE_CURVE('',#493,#503,#505,.T.); +#503 = VERTEX_POINT('',#504); +#504 = CARTESIAN_POINT('',(-4.15,3.15,0.85)); +#505 = LINE('',#506,#507); +#506 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#507 = VECTOR('',#508,1.); +#508 = DIRECTION('',(0.,0.,1.)); +#509 = ORIENTED_EDGE('',*,*,#510,.T.); +#510 = EDGE_CURVE('',#503,#511,#513,.T.); +#511 = VERTEX_POINT('',#512); +#512 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.85)); +#513 = LINE('',#514,#515); +#514 = CARTESIAN_POINT('',(-4.15,4.15,0.85)); +#515 = VECTOR('',#516,1.); +#516 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#517 = ORIENTED_EDGE('',*,*,#518,.T.); +#518 = EDGE_CURVE('',#511,#374,#519,.T.); +#519 = LINE('',#520,#521); +#520 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.65)); +#521 = VECTOR('',#522,1.); +#522 = DIRECTION('',(0.,0.,-1.)); +#523 = ORIENTED_EDGE('',*,*,#373,.T.); +#524 = ORIENTED_EDGE('',*,*,#525,.F.); +#525 = EDGE_CURVE('',#526,#376,#528,.T.); +#526 = VERTEX_POINT('',#527); +#527 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.85)); +#528 = LINE('',#529,#530); +#529 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.65)); +#530 = VECTOR('',#531,1.); +#531 = DIRECTION('',(0.,0.,-1.)); +#532 = ORIENTED_EDGE('',*,*,#533,.T.); +#533 = EDGE_CURVE('',#526,#534,#536,.T.); +#534 = VERTEX_POINT('',#535); +#535 = CARTESIAN_POINT('',(-4.15,-3.15,0.85)); +#536 = LINE('',#537,#538); +#537 = CARTESIAN_POINT('',(-4.15,4.15,0.85)); +#538 = VECTOR('',#539,1.); +#539 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#540 = ORIENTED_EDGE('',*,*,#541,.F.); +#541 = EDGE_CURVE('',#542,#534,#544,.T.); +#542 = VERTEX_POINT('',#543); +#543 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#544 = LINE('',#545,#546); +#545 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#546 = VECTOR('',#547,1.); +#547 = DIRECTION('',(0.,0.,1.)); +#548 = ORIENTED_EDGE('',*,*,#549,.F.); +#549 = EDGE_CURVE('',#550,#542,#552,.T.); +#550 = VERTEX_POINT('',#551); +#551 = CARTESIAN_POINT('',(-4.15,-0.325,0.15)); +#552 = LINE('',#553,#554); +#553 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#554 = VECTOR('',#555,1.); +#555 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#556 = ORIENTED_EDGE('',*,*,#557,.F.); +#557 = EDGE_CURVE('',#495,#550,#558,.T.); +#558 = LINE('',#559,#560); +#559 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#560 = VECTOR('',#561,1.); +#561 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#562 = PLANE('',#563); +#563 = AXIS2_PLACEMENT_3D('',#564,#565,#566); +#564 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#565 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#566 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#567 = ADVANCED_FACE('',(#568),#587,.F.); +#568 = FACE_BOUND('',#569,.F.); +#569 = EDGE_LOOP('',(#570,#578,#579,#580)); +#570 = ORIENTED_EDGE('',*,*,#571,.T.); +#571 = EDGE_CURVE('',#572,#427,#574,.T.); +#572 = VERTEX_POINT('',#573); +#573 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.85)); +#574 = LINE('',#575,#576); +#575 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.65)); +#576 = VECTOR('',#577,1.); +#577 = DIRECTION('',(0.,0.,-1.)); +#578 = ORIENTED_EDGE('',*,*,#434,.T.); +#579 = ORIENTED_EDGE('',*,*,#518,.F.); +#580 = ORIENTED_EDGE('',*,*,#581,.T.); +#581 = EDGE_CURVE('',#511,#572,#582,.T.); +#582 = CIRCLE('',#583,4.2); +#583 = AXIS2_PLACEMENT_3D('',#584,#585,#586); +#584 = CARTESIAN_POINT('',(0.,0.,0.85)); +#585 = DIRECTION('',(0.,0.,-1.)); +#586 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#587 = CYLINDRICAL_SURFACE('',#588,4.2); +#588 = AXIS2_PLACEMENT_3D('',#589,#590,#591); +#589 = CARTESIAN_POINT('',(0.,0.,0.65)); +#590 = DIRECTION('',(0.,0.,-1.)); +#591 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#592 = ADVANCED_FACE('',(#593),#612,.F.); +#593 = FACE_BOUND('',#594,.F.); +#594 = EDGE_LOOP('',(#595,#603,#610,#611)); +#595 = ORIENTED_EDGE('',*,*,#596,.F.); +#596 = EDGE_CURVE('',#597,#384,#599,.T.); +#597 = VERTEX_POINT('',#598); +#598 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.85)); +#599 = LINE('',#600,#601); +#600 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.65)); +#601 = VECTOR('',#602,1.); +#602 = DIRECTION('',(0.,0.,-1.)); +#603 = ORIENTED_EDGE('',*,*,#604,.T.); +#604 = EDGE_CURVE('',#597,#526,#605,.T.); +#605 = CIRCLE('',#606,4.2); +#606 = AXIS2_PLACEMENT_3D('',#607,#608,#609); +#607 = CARTESIAN_POINT('',(0.,0.,0.85)); +#608 = DIRECTION('',(0.,0.,-1.)); +#609 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#610 = ORIENTED_EDGE('',*,*,#525,.T.); +#611 = ORIENTED_EDGE('',*,*,#383,.T.); +#612 = CYLINDRICAL_SURFACE('',#613,4.2); +#613 = AXIS2_PLACEMENT_3D('',#614,#615,#616); +#614 = CARTESIAN_POINT('',(0.,0.,0.65)); +#615 = DIRECTION('',(0.,0.,-1.)); +#616 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#617 = ADVANCED_FACE('',(#618),#668,.F.); +#618 = FACE_BOUND('',#619,.F.); +#619 = EDGE_LOOP('',(#620,#630,#638,#646,#652,#653,#654,#662)); +#620 = ORIENTED_EDGE('',*,*,#621,.F.); +#621 = EDGE_CURVE('',#622,#624,#626,.T.); +#622 = VERTEX_POINT('',#623); +#623 = CARTESIAN_POINT('',(3.75,4.15,0.15)); +#624 = VERTEX_POINT('',#625); +#625 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#626 = LINE('',#627,#628); +#627 = CARTESIAN_POINT('',(4.15,4.15,0.15)); +#628 = VECTOR('',#629,1.); +#629 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#630 = ORIENTED_EDGE('',*,*,#631,.T.); +#631 = EDGE_CURVE('',#622,#632,#634,.T.); +#632 = VERTEX_POINT('',#633); +#633 = CARTESIAN_POINT('',(3.75,4.15,1.15)); +#634 = LINE('',#635,#636); +#635 = CARTESIAN_POINT('',(3.75,4.15,0.15)); +#636 = VECTOR('',#637,1.); +#637 = DIRECTION('',(0.,0.,1.)); +#638 = ORIENTED_EDGE('',*,*,#639,.T.); +#639 = EDGE_CURVE('',#632,#640,#642,.T.); +#640 = VERTEX_POINT('',#641); +#641 = CARTESIAN_POINT('',(0.646142399166,4.15,1.15)); +#642 = LINE('',#643,#644); +#643 = CARTESIAN_POINT('',(4.15,4.15,1.15)); +#644 = VECTOR('',#645,1.); +#645 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#646 = ORIENTED_EDGE('',*,*,#647,.T.); +#647 = EDGE_CURVE('',#640,#418,#648,.T.); +#648 = LINE('',#649,#650); +#649 = CARTESIAN_POINT('',(0.646142399166,4.15,0.65)); +#650 = VECTOR('',#651,1.); +#651 = DIRECTION('',(0.,0.,-1.)); +#652 = ORIENTED_EDGE('',*,*,#426,.T.); +#653 = ORIENTED_EDGE('',*,*,#571,.F.); +#654 = ORIENTED_EDGE('',*,*,#655,.T.); +#655 = EDGE_CURVE('',#572,#656,#658,.T.); +#656 = VERTEX_POINT('',#657); +#657 = CARTESIAN_POINT('',(-3.15,4.15,0.85)); +#658 = LINE('',#659,#660); +#659 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#660 = VECTOR('',#661,1.); +#661 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#662 = ORIENTED_EDGE('',*,*,#663,.F.); +#663 = EDGE_CURVE('',#624,#656,#664,.T.); +#664 = LINE('',#665,#666); +#665 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#666 = VECTOR('',#667,1.); +#667 = DIRECTION('',(0.,0.,1.)); +#668 = PLANE('',#669); +#669 = AXIS2_PLACEMENT_3D('',#670,#671,#672); +#670 = CARTESIAN_POINT('',(4.15,4.15,0.15)); +#671 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#672 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#673 = ADVANCED_FACE('',(#674),#724,.F.); +#674 = FACE_BOUND('',#675,.F.); +#675 = EDGE_LOOP('',(#676,#686,#694,#702,#708,#709,#710,#718)); +#676 = ORIENTED_EDGE('',*,*,#677,.F.); +#677 = EDGE_CURVE('',#678,#680,#682,.T.); +#678 = VERTEX_POINT('',#679); +#679 = CARTESIAN_POINT('',(3.75,-4.15,0.15)); +#680 = VERTEX_POINT('',#681); +#681 = CARTESIAN_POINT('',(3.75,-4.15,1.15)); +#682 = LINE('',#683,#684); +#683 = CARTESIAN_POINT('',(3.75,-4.15,0.15)); +#684 = VECTOR('',#685,1.); +#685 = DIRECTION('',(0.,0.,1.)); +#686 = ORIENTED_EDGE('',*,*,#687,.F.); +#687 = EDGE_CURVE('',#688,#678,#690,.T.); +#688 = VERTEX_POINT('',#689); +#689 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#690 = LINE('',#691,#692); +#691 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#692 = VECTOR('',#693,1.); +#693 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#694 = ORIENTED_EDGE('',*,*,#695,.T.); +#695 = EDGE_CURVE('',#688,#696,#698,.T.); +#696 = VERTEX_POINT('',#697); +#697 = CARTESIAN_POINT('',(-3.15,-4.15,0.85)); +#698 = LINE('',#699,#700); +#699 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#700 = VECTOR('',#701,1.); +#701 = DIRECTION('',(0.,0.,1.)); +#702 = ORIENTED_EDGE('',*,*,#703,.F.); +#703 = EDGE_CURVE('',#597,#696,#704,.T.); +#704 = LINE('',#705,#706); +#705 = CARTESIAN_POINT('',(-5.082284216462E-16,-4.15,0.85)); +#706 = VECTOR('',#707,1.); +#707 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#708 = ORIENTED_EDGE('',*,*,#596,.T.); +#709 = ORIENTED_EDGE('',*,*,#392,.T.); +#710 = ORIENTED_EDGE('',*,*,#711,.F.); +#711 = EDGE_CURVE('',#712,#393,#714,.T.); +#712 = VERTEX_POINT('',#713); +#713 = CARTESIAN_POINT('',(0.646142399166,-4.15,1.15)); +#714 = LINE('',#715,#716); +#715 = CARTESIAN_POINT('',(0.646142399166,-4.15,0.65)); +#716 = VECTOR('',#717,1.); +#717 = DIRECTION('',(0.,0.,-1.)); +#718 = ORIENTED_EDGE('',*,*,#719,.T.); +#719 = EDGE_CURVE('',#712,#680,#720,.T.); +#720 = LINE('',#721,#722); +#721 = CARTESIAN_POINT('',(-3.15,-4.15,1.15)); +#722 = VECTOR('',#723,1.); +#723 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#724 = PLANE('',#725); +#725 = AXIS2_PLACEMENT_3D('',#726,#727,#728); +#726 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#727 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#728 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#729 = ADVANCED_FACE('',(#730),#749,.F.); +#730 = FACE_BOUND('',#731,.F.); +#731 = EDGE_LOOP('',(#732,#741,#747,#748)); +#732 = ORIENTED_EDGE('',*,*,#733,.F.); +#733 = EDGE_CURVE('',#734,#640,#736,.T.); +#734 = VERTEX_POINT('',#735); +#735 = CARTESIAN_POINT('',(4.15,0.646142399166,1.15)); +#736 = CIRCLE('',#737,4.2); +#737 = AXIS2_PLACEMENT_3D('',#738,#739,#740); +#738 = CARTESIAN_POINT('',(0.,0.,1.15)); +#739 = DIRECTION('',(0.,0.,1.)); +#740 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#741 = ORIENTED_EDGE('',*,*,#742,.T.); +#742 = EDGE_CURVE('',#734,#410,#743,.T.); +#743 = LINE('',#744,#745); +#744 = CARTESIAN_POINT('',(4.15,0.646142399166,0.65)); +#745 = VECTOR('',#746,1.); +#746 = DIRECTION('',(0.,0.,-1.)); +#747 = ORIENTED_EDGE('',*,*,#417,.T.); +#748 = ORIENTED_EDGE('',*,*,#647,.F.); +#749 = CYLINDRICAL_SURFACE('',#750,4.2); +#750 = AXIS2_PLACEMENT_3D('',#751,#752,#753); +#751 = CARTESIAN_POINT('',(0.,0.,0.65)); +#752 = DIRECTION('',(0.,0.,-1.)); +#753 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#754 = ADVANCED_FACE('',(#755),#774,.F.); +#755 = FACE_BOUND('',#756,.F.); +#756 = EDGE_LOOP('',(#757,#765,#772,#773)); +#757 = ORIENTED_EDGE('',*,*,#758,.F.); +#758 = EDGE_CURVE('',#759,#401,#761,.T.); +#759 = VERTEX_POINT('',#760); +#760 = CARTESIAN_POINT('',(4.15,-0.646142399166,1.15)); +#761 = LINE('',#762,#763); +#762 = CARTESIAN_POINT('',(4.15,-0.646142399166,0.65)); +#763 = VECTOR('',#764,1.); +#764 = DIRECTION('',(0.,0.,-1.)); +#765 = ORIENTED_EDGE('',*,*,#766,.F.); +#766 = EDGE_CURVE('',#712,#759,#767,.T.); +#767 = CIRCLE('',#768,4.2); +#768 = AXIS2_PLACEMENT_3D('',#769,#770,#771); +#769 = CARTESIAN_POINT('',(0.,0.,1.15)); +#770 = DIRECTION('',(0.,0.,1.)); +#771 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#772 = ORIENTED_EDGE('',*,*,#711,.T.); +#773 = ORIENTED_EDGE('',*,*,#400,.T.); +#774 = CYLINDRICAL_SURFACE('',#775,4.2); +#775 = AXIS2_PLACEMENT_3D('',#776,#777,#778); +#776 = CARTESIAN_POINT('',(0.,0.,0.65)); +#777 = DIRECTION('',(0.,0.,-1.)); +#778 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#779 = ADVANCED_FACE('',(#780),#839,.F.); +#780 = FACE_BOUND('',#781,.F.); +#781 = EDGE_LOOP('',(#782,#792,#800,#806,#807,#808,#809,#817,#825,#833) + ); +#782 = ORIENTED_EDGE('',*,*,#783,.F.); +#783 = EDGE_CURVE('',#784,#786,#788,.T.); +#784 = VERTEX_POINT('',#785); +#785 = CARTESIAN_POINT('',(4.15,-3.75,0.15)); +#786 = VERTEX_POINT('',#787); +#787 = CARTESIAN_POINT('',(4.15,-0.325,0.15)); +#788 = LINE('',#789,#790); +#789 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#790 = VECTOR('',#791,1.); +#791 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#792 = ORIENTED_EDGE('',*,*,#793,.T.); +#793 = EDGE_CURVE('',#784,#794,#796,.T.); +#794 = VERTEX_POINT('',#795); +#795 = CARTESIAN_POINT('',(4.15,-3.75,1.15)); +#796 = LINE('',#797,#798); +#797 = CARTESIAN_POINT('',(4.15,-3.75,0.15)); +#798 = VECTOR('',#799,1.); +#799 = DIRECTION('',(0.,0.,1.)); +#800 = ORIENTED_EDGE('',*,*,#801,.T.); +#801 = EDGE_CURVE('',#794,#759,#802,.T.); +#802 = LINE('',#803,#804); +#803 = CARTESIAN_POINT('',(4.15,-4.15,1.15)); +#804 = VECTOR('',#805,1.); +#805 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#806 = ORIENTED_EDGE('',*,*,#758,.T.); +#807 = ORIENTED_EDGE('',*,*,#409,.T.); +#808 = ORIENTED_EDGE('',*,*,#742,.F.); +#809 = ORIENTED_EDGE('',*,*,#810,.T.); +#810 = EDGE_CURVE('',#734,#811,#813,.T.); +#811 = VERTEX_POINT('',#812); +#812 = CARTESIAN_POINT('',(4.15,3.75,1.15)); +#813 = LINE('',#814,#815); +#814 = CARTESIAN_POINT('',(4.15,-4.15,1.15)); +#815 = VECTOR('',#816,1.); +#816 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#817 = ORIENTED_EDGE('',*,*,#818,.F.); +#818 = EDGE_CURVE('',#819,#811,#821,.T.); +#819 = VERTEX_POINT('',#820); +#820 = CARTESIAN_POINT('',(4.15,3.75,0.15)); +#821 = LINE('',#822,#823); +#822 = CARTESIAN_POINT('',(4.15,3.75,0.15)); +#823 = VECTOR('',#824,1.); +#824 = DIRECTION('',(0.,0.,1.)); +#825 = ORIENTED_EDGE('',*,*,#826,.F.); +#826 = EDGE_CURVE('',#827,#819,#829,.T.); +#827 = VERTEX_POINT('',#828); +#828 = CARTESIAN_POINT('',(4.15,0.325,0.15)); +#829 = LINE('',#830,#831); +#830 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#831 = VECTOR('',#832,1.); +#832 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#833 = ORIENTED_EDGE('',*,*,#834,.F.); +#834 = EDGE_CURVE('',#786,#827,#835,.T.); +#835 = LINE('',#836,#837); +#836 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#837 = VECTOR('',#838,1.); +#838 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#839 = PLANE('',#840); +#840 = AXIS2_PLACEMENT_3D('',#841,#842,#843); +#841 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#842 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#843 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#844 = ADVANCED_FACE('',(#845),#874,.T.); +#845 = FACE_BOUND('',#846,.T.); +#846 = EDGE_LOOP('',(#847,#855,#872,#873)); +#847 = ORIENTED_EDGE('',*,*,#848,.T.); +#848 = EDGE_CURVE('',#453,#849,#851,.T.); +#849 = VERTEX_POINT('',#850); +#850 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#851 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#852,#853,#854), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +25.132741228718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#852 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#853 = CARTESIAN_POINT('',(-4.,1.567121998241E-15,2.451663208837)); +#854 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#855 = ORIENTED_EDGE('',*,*,#856,.T.); +#856 = EDGE_CURVE('',#849,#849,#857,.T.); +#857 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#858,#859,#860,#861,#862, + #863,#864,#865,#866,#867,#868,#869,#870,#871),.UNSPECIFIED.,.T.,.F.) + B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-25.13274122871, + 4.970488814277E-16,25.132741228718,50.265482457436),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1., + 1.000000000001,0.999999999997,1.000000000006,0.999999999991, + 1.000000000009,0.999999999992,1.000000000006,0.999999999996, +1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') ); +#858 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#859 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822,2.488178046004 + )); +#860 = CARTESIAN_POINT('',(-3.015267027678,3.854580985394,2.488178046004 + )); +#861 = CARTESIAN_POINT('',(-0.988824457307,5.24838451341,2.488178046004) + ); +#862 = CARTESIAN_POINT('',(1.799817736619,5.462446172587,2.488178046004) + ); +#863 = CARTESIAN_POINT('',(4.208872671035,3.976872241643,2.488178046004) + ); +#864 = CARTESIAN_POINT('',(5.975661405969,1.808266193148,2.488178046005) + ); +#865 = CARTESIAN_POINT('',(5.975661406074,-1.808266193179,2.488178046004 + )); +#866 = CARTESIAN_POINT('',(4.208872670975,-3.976872241589,2.488178046004 + )); +#867 = CARTESIAN_POINT('',(1.799817736635,-5.462446172635,2.488178046004 + )); +#868 = CARTESIAN_POINT('',(-0.988824457302,-5.248384513387, + 2.488178046004)); +#869 = CARTESIAN_POINT('',(-3.015267027684,-3.8545809854,2.488178046004) + ); +#870 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.488178046004)); +#871 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#872 = ORIENTED_EDGE('',*,*,#848,.F.); +#873 = ORIENTED_EDGE('',*,*,#463,.F.); +#874 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#875,#876,#877,#878,#879,#880,#881,#882,#883,#884,#885,#886,#887 + ,#888) + ,(#889,#890,#891,#892,#893,#894,#895,#896,#897,#898,#899,#900,#901 + ,#902) + ,(#903,#904,#905,#906,#907,#908,#909,#910,#911,#912,#913,#914,#915 +,#916 + )),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1, + 13,13,1),(0.,25.132741228718),(-25.13274122871,4.970488814277E-16, + 25.132741228718,50.265482457436),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 + ,1.000000000002,0.999999999999,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945877,0.738548945873 + ,0.738548945881,0.738548945869,0.738548945884,0.738548945869 + ,0.738548945881,0.738548945873,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 +,1.000000000002,0.999999999999,1.,1. + ))) REPRESENTATION_ITEM('') SURFACE() ); +#875 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#876 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015,2.448343678186 + )); +#877 = CARTESIAN_POINT('',(-2.987855509242,3.819539340071,2.448343678186 + )); +#878 = CARTESIAN_POINT('',(-0.979835144066,5.200671926926,2.448343678186 + )); +#879 = CARTESIAN_POINT('',(1.783455757208,5.412787571015,2.448343678186) + ); +#880 = CARTESIAN_POINT('',(4.170610192189,3.940718857633,2.448343678186) + ); +#881 = CARTESIAN_POINT('',(5.921337211392,1.791827409569,2.448343678186) + ); +#882 = CARTESIAN_POINT('',(5.921337211452,-1.791827409599,2.448343678186 + )); +#883 = CARTESIAN_POINT('',(4.170610192165,-3.940718857579,2.448343678186 + )); +#884 = CARTESIAN_POINT('',(1.783455757201,-5.412787571063,2.448343678186 + )); +#885 = CARTESIAN_POINT('',(-0.979835144048,-5.200671926903, + 2.448343678186)); +#886 = CARTESIAN_POINT('',(-2.987855509252,-3.819539340077, + 2.448343678186)); +#887 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 2.448343678186)); +#888 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#889 = CARTESIAN_POINT('',(-4.,1.567121998241E-15,2.451663208837)); +#890 = CARTESIAN_POINT('',(-4.000000000002,1.905321418822,2.451663208837 + )); +#891 = CARTESIAN_POINT('',(-3.015267027676,3.854580985393,2.451663208837 + )); +#892 = CARTESIAN_POINT('',(-0.988824457311,5.248384513412,2.451663208837 + )); +#893 = CARTESIAN_POINT('',(1.799817736624,5.462446172583,2.451663208837) + ); +#894 = CARTESIAN_POINT('',(4.20887267103,3.976872241648,2.451663208837) + ); +#895 = CARTESIAN_POINT('',(5.975661405974,1.808266193145,2.451663208837) + ); +#896 = CARTESIAN_POINT('',(5.97566140607,-1.808266193178,2.451663208837) + ); +#897 = CARTESIAN_POINT('',(4.208872670981,-3.97687224159,2.451663208837) + ); +#898 = CARTESIAN_POINT('',(1.799817736631,-5.462446172635,2.451663208837 + )); +#899 = CARTESIAN_POINT('',(-0.988824457299,-5.248384513388, + 2.451663208837)); +#900 = CARTESIAN_POINT('',(-3.015267027685,-3.854580985399, + 2.451663208837)); +#901 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.451663208837)); +#902 = CARTESIAN_POINT('',(-4.,1.567121998241E-15,2.451663208837)); +#903 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#904 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822,2.488178046004 + )); +#905 = CARTESIAN_POINT('',(-3.015267027678,3.854580985394,2.488178046004 + )); +#906 = CARTESIAN_POINT('',(-0.988824457307,5.24838451341,2.488178046004) + ); +#907 = CARTESIAN_POINT('',(1.799817736619,5.462446172587,2.488178046004) + ); +#908 = CARTESIAN_POINT('',(4.208872671035,3.976872241643,2.488178046004) + ); +#909 = CARTESIAN_POINT('',(5.975661405969,1.808266193148,2.488178046005) + ); +#910 = CARTESIAN_POINT('',(5.975661406074,-1.808266193179,2.488178046004 + )); +#911 = CARTESIAN_POINT('',(4.208872670975,-3.976872241589,2.488178046004 + )); +#912 = CARTESIAN_POINT('',(1.799817736635,-5.462446172635,2.488178046004 + )); +#913 = CARTESIAN_POINT('',(-0.988824457302,-5.248384513387, + 2.488178046004)); +#914 = CARTESIAN_POINT('',(-3.015267027684,-3.8545809854,2.488178046004) + ); +#915 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.488178046004)); +#916 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#917 = ADVANCED_FACE('',(#918),#998,.F.); +#918 = FACE_BOUND('',#919,.F.); +#919 = EDGE_LOOP('',(#920,#927,#928,#936,#945,#951,#952,#959,#960,#966, + #967,#975,#984,#990,#991,#997)); +#920 = ORIENTED_EDGE('',*,*,#921,.F.); +#921 = EDGE_CURVE('',#784,#678,#922,.T.); +#922 = CIRCLE('',#923,0.4); +#923 = AXIS2_PLACEMENT_3D('',#924,#925,#926); +#924 = CARTESIAN_POINT('',(3.75,-3.75,0.15)); +#925 = DIRECTION('',(0.,0.,-1.)); +#926 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#927 = ORIENTED_EDGE('',*,*,#783,.T.); +#928 = ORIENTED_EDGE('',*,*,#929,.F.); +#929 = EDGE_CURVE('',#930,#786,#932,.T.); +#930 = VERTEX_POINT('',#931); +#931 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#932 = LINE('',#933,#934); +#933 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#934 = VECTOR('',#935,1.); +#935 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#936 = ORIENTED_EDGE('',*,*,#937,.F.); +#937 = EDGE_CURVE('',#938,#930,#940,.T.); +#938 = VERTEX_POINT('',#939); +#939 = CARTESIAN_POINT('',(1.425,0.325,0.15)); +#940 = CIRCLE('',#941,0.325); +#941 = AXIS2_PLACEMENT_3D('',#942,#943,#944); +#942 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.15)); +#943 = DIRECTION('',(0.,0.,1.)); +#944 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#945 = ORIENTED_EDGE('',*,*,#946,.F.); +#946 = EDGE_CURVE('',#827,#938,#947,.T.); +#947 = LINE('',#948,#949); +#948 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#949 = VECTOR('',#950,1.); +#950 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#951 = ORIENTED_EDGE('',*,*,#826,.T.); +#952 = ORIENTED_EDGE('',*,*,#953,.F.); +#953 = EDGE_CURVE('',#622,#819,#954,.T.); +#954 = CIRCLE('',#955,0.4); +#955 = AXIS2_PLACEMENT_3D('',#956,#957,#958); +#956 = CARTESIAN_POINT('',(3.75,3.75,0.15)); +#957 = DIRECTION('',(0.,0.,-1.)); +#958 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#959 = ORIENTED_EDGE('',*,*,#621,.T.); +#960 = ORIENTED_EDGE('',*,*,#961,.T.); +#961 = EDGE_CURVE('',#624,#493,#962,.T.); +#962 = LINE('',#963,#964); +#963 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#964 = VECTOR('',#965,1.); +#965 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#966 = ORIENTED_EDGE('',*,*,#492,.T.); +#967 = ORIENTED_EDGE('',*,*,#968,.F.); +#968 = EDGE_CURVE('',#969,#495,#971,.T.); +#969 = VERTEX_POINT('',#970); +#970 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#971 = LINE('',#972,#973); +#972 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#973 = VECTOR('',#974,1.); +#974 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#975 = ORIENTED_EDGE('',*,*,#976,.F.); +#976 = EDGE_CURVE('',#977,#969,#979,.T.); +#977 = VERTEX_POINT('',#978); +#978 = CARTESIAN_POINT('',(-1.425,-0.325,0.15)); +#979 = CIRCLE('',#980,0.325); +#980 = AXIS2_PLACEMENT_3D('',#981,#982,#983); +#981 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.15)); +#982 = DIRECTION('',(-0.,0.,1.)); +#983 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#984 = ORIENTED_EDGE('',*,*,#985,.F.); +#985 = EDGE_CURVE('',#550,#977,#986,.T.); +#986 = LINE('',#987,#988); +#987 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#988 = VECTOR('',#989,1.); +#989 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#990 = ORIENTED_EDGE('',*,*,#549,.T.); +#991 = ORIENTED_EDGE('',*,*,#992,.T.); +#992 = EDGE_CURVE('',#542,#688,#993,.T.); +#993 = LINE('',#994,#995); +#994 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#995 = VECTOR('',#996,1.); +#996 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#997 = ORIENTED_EDGE('',*,*,#687,.T.); +#998 = PLANE('',#999); +#999 = AXIS2_PLACEMENT_3D('',#1000,#1001,#1002); +#1000 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,0.15)); +#1001 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#1002 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#1003 = ADVANCED_FACE('',(#1004),#1015,.F.); +#1004 = FACE_BOUND('',#1005,.F.); +#1005 = EDGE_LOOP('',(#1006,#1007,#1008,#1014)); +#1006 = ORIENTED_EDGE('',*,*,#961,.F.); +#1007 = ORIENTED_EDGE('',*,*,#663,.T.); +#1008 = ORIENTED_EDGE('',*,*,#1009,.T.); +#1009 = EDGE_CURVE('',#656,#503,#1010,.T.); +#1010 = LINE('',#1011,#1012); +#1011 = CARTESIAN_POINT('',(-2.3625,4.9375,0.85)); +#1012 = VECTOR('',#1013,1.); +#1013 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#1014 = ORIENTED_EDGE('',*,*,#502,.F.); +#1015 = PLANE('',#1016); +#1016 = AXIS2_PLACEMENT_3D('',#1017,#1018,#1019); +#1017 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#1018 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#1019 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#1020 = ADVANCED_FACE('',(#1021),#1046,.T.); +#1021 = FACE_BOUND('',#1022,.T.); +#1022 = EDGE_LOOP('',(#1023,#1031,#1039,#1045)); +#1023 = ORIENTED_EDGE('',*,*,#1024,.T.); +#1024 = EDGE_CURVE('',#495,#1025,#1027,.T.); +#1025 = VERTEX_POINT('',#1026); +#1026 = CARTESIAN_POINT('',(-4.75,0.325,0.15)); +#1027 = LINE('',#1028,#1029); +#1028 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#1029 = VECTOR('',#1030,1.); +#1030 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#1031 = ORIENTED_EDGE('',*,*,#1032,.T.); +#1032 = EDGE_CURVE('',#1025,#1033,#1035,.T.); +#1033 = VERTEX_POINT('',#1034); +#1034 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#1035 = LINE('',#1036,#1037); +#1036 = CARTESIAN_POINT('',(-4.75,0.325,0.15)); +#1037 = VECTOR('',#1038,1.); +#1038 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1039 = ORIENTED_EDGE('',*,*,#1040,.T.); +#1040 = EDGE_CURVE('',#1033,#550,#1041,.T.); +#1041 = LINE('',#1042,#1043); +#1042 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#1043 = VECTOR('',#1044,1.); +#1044 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1045 = ORIENTED_EDGE('',*,*,#557,.F.); +#1046 = PLANE('',#1047); +#1047 = AXIS2_PLACEMENT_3D('',#1048,#1049,#1050); +#1048 = CARTESIAN_POINT('',(-3.000096934556,3.808225032462E-16,0.15)); +#1049 = DIRECTION('',(0.,0.,1.)); +#1050 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1051 = ADVANCED_FACE('',(#1052),#1058,.T.); +#1052 = FACE_BOUND('',#1053,.T.); +#1053 = EDGE_LOOP('',(#1054,#1055,#1056,#1057)); +#1054 = ORIENTED_EDGE('',*,*,#581,.T.); +#1055 = ORIENTED_EDGE('',*,*,#655,.T.); +#1056 = ORIENTED_EDGE('',*,*,#1009,.T.); +#1057 = ORIENTED_EDGE('',*,*,#510,.T.); +#1058 = PLANE('',#1059); +#1059 = AXIS2_PLACEMENT_3D('',#1060,#1061,#1062); +#1060 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#1061 = DIRECTION('',(0.,0.,1.)); +#1062 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1063 = ADVANCED_FACE('',(#1064),#1075,.F.); +#1064 = FACE_BOUND('',#1065,.F.); +#1065 = EDGE_LOOP('',(#1066,#1067,#1068,#1074)); +#1066 = ORIENTED_EDGE('',*,*,#992,.F.); +#1067 = ORIENTED_EDGE('',*,*,#541,.T.); +#1068 = ORIENTED_EDGE('',*,*,#1069,.T.); +#1069 = EDGE_CURVE('',#534,#696,#1070,.T.); +#1070 = LINE('',#1071,#1072); +#1071 = CARTESIAN_POINT('',(-4.9375,-2.3625,0.85)); +#1072 = VECTOR('',#1073,1.); +#1073 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#1074 = ORIENTED_EDGE('',*,*,#695,.F.); +#1075 = PLANE('',#1076); +#1076 = AXIS2_PLACEMENT_3D('',#1077,#1078,#1079); +#1077 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#1078 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#1079 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#1080 = ADVANCED_FACE('',(#1081),#1087,.T.); +#1081 = FACE_BOUND('',#1082,.T.); +#1082 = EDGE_LOOP('',(#1083,#1084,#1085,#1086)); +#1083 = ORIENTED_EDGE('',*,*,#703,.F.); +#1084 = ORIENTED_EDGE('',*,*,#604,.T.); +#1085 = ORIENTED_EDGE('',*,*,#533,.T.); +#1086 = ORIENTED_EDGE('',*,*,#1069,.T.); +#1087 = PLANE('',#1088); +#1088 = AXIS2_PLACEMENT_3D('',#1089,#1090,#1091); +#1089 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#1090 = DIRECTION('',(0.,0.,1.)); +#1091 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1092 = ADVANCED_FACE('',(#1093),#1105,.T.); +#1093 = FACE_BOUND('',#1094,.T.); +#1094 = EDGE_LOOP('',(#1095,#1096,#1097,#1104)); +#1095 = ORIENTED_EDGE('',*,*,#733,.F.); +#1096 = ORIENTED_EDGE('',*,*,#810,.T.); +#1097 = ORIENTED_EDGE('',*,*,#1098,.F.); +#1098 = EDGE_CURVE('',#632,#811,#1099,.T.); +#1099 = CIRCLE('',#1100,0.4); +#1100 = AXIS2_PLACEMENT_3D('',#1101,#1102,#1103); +#1101 = CARTESIAN_POINT('',(3.75,3.75,1.15)); +#1102 = DIRECTION('',(0.,0.,-1.)); +#1103 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1104 = ORIENTED_EDGE('',*,*,#639,.T.); +#1105 = PLANE('',#1106); +#1106 = AXIS2_PLACEMENT_3D('',#1107,#1108,#1109); +#1107 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,1.15)); +#1108 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#1109 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#1110 = ADVANCED_FACE('',(#1111),#1117,.T.); +#1111 = FACE_BOUND('',#1112,.T.); +#1112 = EDGE_LOOP('',(#1113,#1114,#1115,#1116)); +#1113 = ORIENTED_EDGE('',*,*,#631,.T.); +#1114 = ORIENTED_EDGE('',*,*,#1098,.T.); +#1115 = ORIENTED_EDGE('',*,*,#818,.F.); +#1116 = ORIENTED_EDGE('',*,*,#953,.F.); +#1117 = CYLINDRICAL_SURFACE('',#1118,0.4); +#1118 = AXIS2_PLACEMENT_3D('',#1119,#1120,#1121); +#1119 = CARTESIAN_POINT('',(3.75,3.75,0.15)); +#1120 = DIRECTION('',(0.,0.,1.)); +#1121 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#1122 = ADVANCED_FACE('',(#1123),#1135,.T.); +#1123 = FACE_BOUND('',#1124,.T.); +#1124 = EDGE_LOOP('',(#1125,#1126,#1133,#1134)); +#1125 = ORIENTED_EDGE('',*,*,#793,.T.); +#1126 = ORIENTED_EDGE('',*,*,#1127,.T.); +#1127 = EDGE_CURVE('',#794,#680,#1128,.T.); +#1128 = CIRCLE('',#1129,0.4); +#1129 = AXIS2_PLACEMENT_3D('',#1130,#1131,#1132); +#1130 = CARTESIAN_POINT('',(3.75,-3.75,1.15)); +#1131 = DIRECTION('',(0.,0.,-1.)); +#1132 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1133 = ORIENTED_EDGE('',*,*,#677,.F.); +#1134 = ORIENTED_EDGE('',*,*,#921,.F.); +#1135 = CYLINDRICAL_SURFACE('',#1136,0.4); +#1136 = AXIS2_PLACEMENT_3D('',#1137,#1138,#1139); +#1137 = CARTESIAN_POINT('',(3.75,-3.75,0.15)); +#1138 = DIRECTION('',(0.,0.,1.)); +#1139 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1140 = ADVANCED_FACE('',(#1141),#1147,.T.); +#1141 = FACE_BOUND('',#1142,.T.); +#1142 = EDGE_LOOP('',(#1143,#1144,#1145,#1146)); +#1143 = ORIENTED_EDGE('',*,*,#1127,.F.); +#1144 = ORIENTED_EDGE('',*,*,#801,.T.); +#1145 = ORIENTED_EDGE('',*,*,#766,.F.); +#1146 = ORIENTED_EDGE('',*,*,#719,.T.); +#1147 = PLANE('',#1148); +#1148 = AXIS2_PLACEMENT_3D('',#1149,#1150,#1151); +#1149 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,1.15)); +#1150 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#1151 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#1152 = ADVANCED_FACE('',(#1153),#1178,.T.); +#1153 = FACE_BOUND('',#1154,.T.); +#1154 = EDGE_LOOP('',(#1155,#1163,#1171,#1177)); +#1155 = ORIENTED_EDGE('',*,*,#1156,.T.); +#1156 = EDGE_CURVE('',#786,#1157,#1159,.T.); +#1157 = VERTEX_POINT('',#1158); +#1158 = CARTESIAN_POINT('',(4.75,-0.325,0.15)); +#1159 = LINE('',#1160,#1161); +#1160 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#1161 = VECTOR('',#1162,1.); +#1162 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#1163 = ORIENTED_EDGE('',*,*,#1164,.T.); +#1164 = EDGE_CURVE('',#1157,#1165,#1167,.T.); +#1165 = VERTEX_POINT('',#1166); +#1166 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#1167 = LINE('',#1168,#1169); +#1168 = CARTESIAN_POINT('',(4.75,-0.325,0.15)); +#1169 = VECTOR('',#1170,1.); +#1170 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#1171 = ORIENTED_EDGE('',*,*,#1172,.T.); +#1172 = EDGE_CURVE('',#1165,#827,#1173,.T.); +#1173 = LINE('',#1174,#1175); +#1174 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#1175 = VECTOR('',#1176,1.); +#1176 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#1177 = ORIENTED_EDGE('',*,*,#834,.F.); +#1178 = PLANE('',#1179); +#1179 = AXIS2_PLACEMENT_3D('',#1180,#1181,#1182); +#1180 = CARTESIAN_POINT('',(3.000096934556,-7.482284140497E-16,0.15)); +#1181 = DIRECTION('',(0.,0.,1.)); +#1182 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#1183 = ADVANCED_FACE('',(#1184),#1230,.T.); +#1184 = FACE_BOUND('',#1185,.T.); +#1185 = EDGE_LOOP('',(#1186,#1187,#1195,#1204,#1213,#1222,#1229)); +#1186 = ORIENTED_EDGE('',*,*,#856,.F.); +#1187 = ORIENTED_EDGE('',*,*,#1188,.T.); +#1188 = EDGE_CURVE('',#849,#1189,#1191,.T.); +#1189 = VERTEX_POINT('',#1190); +#1190 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,9.466666666667)); +#1191 = LINE('',#1192,#1193); +#1192 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.45)); +#1193 = VECTOR('',#1194,1.); +#1194 = DIRECTION('',(0.,0.,1.)); +#1195 = ORIENTED_EDGE('',*,*,#1196,.T.); +#1196 = EDGE_CURVE('',#1189,#1197,#1199,.T.); +#1197 = VERTEX_POINT('',#1198); +#1198 = CARTESIAN_POINT('',(1.2,3.815756805668,9.466666666667)); +#1199 = CIRCLE('',#1200,4.); +#1200 = AXIS2_PLACEMENT_3D('',#1201,#1202,#1203); +#1201 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1202 = DIRECTION('',(0.,0.,-1.)); +#1203 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1204 = ORIENTED_EDGE('',*,*,#1205,.T.); +#1205 = EDGE_CURVE('',#1197,#1206,#1208,.T.); +#1206 = VERTEX_POINT('',#1207); +#1207 = CARTESIAN_POINT('',(4.,-2.288475490444E-17,9.466666666667)); +#1208 = CIRCLE('',#1209,4.); +#1209 = AXIS2_PLACEMENT_3D('',#1210,#1211,#1212); +#1210 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1211 = DIRECTION('',(0.,0.,-1.)); +#1212 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1213 = ORIENTED_EDGE('',*,*,#1214,.T.); +#1214 = EDGE_CURVE('',#1206,#1215,#1217,.T.); +#1215 = VERTEX_POINT('',#1216); +#1216 = CARTESIAN_POINT('',(1.2,-3.815756805668,9.466666666667)); +#1217 = CIRCLE('',#1218,4.); +#1218 = AXIS2_PLACEMENT_3D('',#1219,#1220,#1221); +#1219 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1220 = DIRECTION('',(0.,0.,-1.)); +#1221 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1222 = ORIENTED_EDGE('',*,*,#1223,.T.); +#1223 = EDGE_CURVE('',#1215,#1189,#1224,.T.); +#1224 = CIRCLE('',#1225,4.); +#1225 = AXIS2_PLACEMENT_3D('',#1226,#1227,#1228); +#1226 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1227 = DIRECTION('',(0.,0.,-1.)); +#1228 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1229 = ORIENTED_EDGE('',*,*,#1188,.F.); +#1230 = CYLINDRICAL_SURFACE('',#1231,4.); +#1231 = AXIS2_PLACEMENT_3D('',#1232,#1233,#1234); +#1232 = CARTESIAN_POINT('',(0.,0.,2.45)); +#1233 = DIRECTION('',(0.,0.,1.)); +#1234 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1235 = ADVANCED_FACE('',(#1236),#1262,.F.); +#1236 = FACE_BOUND('',#1237,.F.); +#1237 = EDGE_LOOP('',(#1238,#1246,#1247,#1248,#1256)); +#1238 = ORIENTED_EDGE('',*,*,#1239,.T.); +#1239 = EDGE_CURVE('',#1240,#1033,#1242,.T.); +#1240 = VERTEX_POINT('',#1241); +#1241 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#1242 = LINE('',#1243,#1244); +#1243 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#1244 = VECTOR('',#1245,1.); +#1245 = DIRECTION('',(0.,0.,1.)); +#1246 = ORIENTED_EDGE('',*,*,#1040,.T.); +#1247 = ORIENTED_EDGE('',*,*,#985,.T.); +#1248 = ORIENTED_EDGE('',*,*,#1249,.F.); +#1249 = EDGE_CURVE('',#1250,#977,#1252,.T.); +#1250 = VERTEX_POINT('',#1251); +#1251 = CARTESIAN_POINT('',(-1.425,-0.325,0.)); +#1252 = LINE('',#1253,#1254); +#1253 = CARTESIAN_POINT('',(-1.425,-0.325,0.)); +#1254 = VECTOR('',#1255,1.); +#1255 = DIRECTION('',(0.,0.,1.)); +#1256 = ORIENTED_EDGE('',*,*,#1257,.F.); +#1257 = EDGE_CURVE('',#1240,#1250,#1258,.T.); +#1258 = LINE('',#1259,#1260); +#1259 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#1260 = VECTOR('',#1261,1.); +#1261 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1262 = PLANE('',#1263); +#1263 = AXIS2_PLACEMENT_3D('',#1264,#1265,#1266); +#1264 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#1265 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1266 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1267 = ADVANCED_FACE('',(#1268),#1287,.T.); +#1268 = FACE_BOUND('',#1269,.T.); +#1269 = EDGE_LOOP('',(#1270,#1279,#1285,#1286)); +#1270 = ORIENTED_EDGE('',*,*,#1271,.T.); +#1271 = EDGE_CURVE('',#1250,#1272,#1274,.T.); +#1272 = VERTEX_POINT('',#1273); +#1273 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#1274 = CIRCLE('',#1275,0.325); +#1275 = AXIS2_PLACEMENT_3D('',#1276,#1277,#1278); +#1276 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.)); +#1277 = DIRECTION('',(-0.,0.,1.)); +#1278 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#1279 = ORIENTED_EDGE('',*,*,#1280,.T.); +#1280 = EDGE_CURVE('',#1272,#969,#1281,.T.); +#1281 = LINE('',#1282,#1283); +#1282 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#1283 = VECTOR('',#1284,1.); +#1284 = DIRECTION('',(0.,0.,1.)); +#1285 = ORIENTED_EDGE('',*,*,#976,.F.); +#1286 = ORIENTED_EDGE('',*,*,#1249,.F.); +#1287 = CYLINDRICAL_SURFACE('',#1288,0.325); +#1288 = AXIS2_PLACEMENT_3D('',#1289,#1290,#1291); +#1289 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.)); +#1290 = DIRECTION('',(0.,0.,-1.)); +#1291 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#1292 = ADVANCED_FACE('',(#1293),#1312,.F.); +#1293 = FACE_BOUND('',#1294,.F.); +#1294 = EDGE_LOOP('',(#1295,#1296,#1297,#1298,#1306)); +#1295 = ORIENTED_EDGE('',*,*,#1280,.T.); +#1296 = ORIENTED_EDGE('',*,*,#968,.T.); +#1297 = ORIENTED_EDGE('',*,*,#1024,.T.); +#1298 = ORIENTED_EDGE('',*,*,#1299,.F.); +#1299 = EDGE_CURVE('',#1300,#1025,#1302,.T.); +#1300 = VERTEX_POINT('',#1301); +#1301 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#1302 = LINE('',#1303,#1304); +#1303 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#1304 = VECTOR('',#1305,1.); +#1305 = DIRECTION('',(0.,0.,1.)); +#1306 = ORIENTED_EDGE('',*,*,#1307,.F.); +#1307 = EDGE_CURVE('',#1272,#1300,#1308,.T.); +#1308 = LINE('',#1309,#1310); +#1309 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#1310 = VECTOR('',#1311,1.); +#1311 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#1312 = PLANE('',#1313); +#1313 = AXIS2_PLACEMENT_3D('',#1314,#1315,#1316); +#1314 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#1315 = DIRECTION('',(-8.90745137606E-17,-1.,0.)); +#1316 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#1317 = ADVANCED_FACE('',(#1318),#1344,.F.); +#1318 = FACE_BOUND('',#1319,.F.); +#1319 = EDGE_LOOP('',(#1320,#1328,#1329,#1330,#1338)); +#1320 = ORIENTED_EDGE('',*,*,#1321,.T.); +#1321 = EDGE_CURVE('',#1322,#1165,#1324,.T.); +#1322 = VERTEX_POINT('',#1323); +#1323 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#1324 = LINE('',#1325,#1326); +#1325 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#1326 = VECTOR('',#1327,1.); +#1327 = DIRECTION('',(0.,0.,1.)); +#1328 = ORIENTED_EDGE('',*,*,#1172,.T.); +#1329 = ORIENTED_EDGE('',*,*,#946,.T.); +#1330 = ORIENTED_EDGE('',*,*,#1331,.F.); +#1331 = EDGE_CURVE('',#1332,#938,#1334,.T.); +#1332 = VERTEX_POINT('',#1333); +#1333 = CARTESIAN_POINT('',(1.425,0.325,0.)); +#1334 = LINE('',#1335,#1336); +#1335 = CARTESIAN_POINT('',(1.425,0.325,0.)); +#1336 = VECTOR('',#1337,1.); +#1337 = DIRECTION('',(0.,0.,1.)); +#1338 = ORIENTED_EDGE('',*,*,#1339,.F.); +#1339 = EDGE_CURVE('',#1322,#1332,#1340,.T.); +#1340 = LINE('',#1341,#1342); +#1341 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#1342 = VECTOR('',#1343,1.); +#1343 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#1344 = PLANE('',#1345); +#1345 = AXIS2_PLACEMENT_3D('',#1346,#1347,#1348); +#1346 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#1347 = DIRECTION('',(-2.449293598295E-16,-1.,0.)); +#1348 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#1349 = ADVANCED_FACE('',(#1350),#1369,.T.); +#1350 = FACE_BOUND('',#1351,.T.); +#1351 = EDGE_LOOP('',(#1352,#1361,#1367,#1368)); +#1352 = ORIENTED_EDGE('',*,*,#1353,.T.); +#1353 = EDGE_CURVE('',#1332,#1354,#1356,.T.); +#1354 = VERTEX_POINT('',#1355); +#1355 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#1356 = CIRCLE('',#1357,0.325); +#1357 = AXIS2_PLACEMENT_3D('',#1358,#1359,#1360); +#1358 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.)); +#1359 = DIRECTION('',(0.,0.,1.)); +#1360 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#1361 = ORIENTED_EDGE('',*,*,#1362,.T.); +#1362 = EDGE_CURVE('',#1354,#930,#1363,.T.); +#1363 = LINE('',#1364,#1365); +#1364 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#1365 = VECTOR('',#1366,1.); +#1366 = DIRECTION('',(0.,0.,1.)); +#1367 = ORIENTED_EDGE('',*,*,#937,.F.); +#1368 = ORIENTED_EDGE('',*,*,#1331,.F.); +#1369 = CYLINDRICAL_SURFACE('',#1370,0.325); +#1370 = AXIS2_PLACEMENT_3D('',#1371,#1372,#1373); +#1371 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.)); +#1372 = DIRECTION('',(-0.,0.,-1.)); +#1373 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#1374 = ADVANCED_FACE('',(#1375),#1394,.F.); +#1375 = FACE_BOUND('',#1376,.F.); +#1376 = EDGE_LOOP('',(#1377,#1378,#1379,#1380,#1388)); +#1377 = ORIENTED_EDGE('',*,*,#1362,.T.); +#1378 = ORIENTED_EDGE('',*,*,#929,.T.); +#1379 = ORIENTED_EDGE('',*,*,#1156,.T.); +#1380 = ORIENTED_EDGE('',*,*,#1381,.F.); +#1381 = EDGE_CURVE('',#1382,#1157,#1384,.T.); +#1382 = VERTEX_POINT('',#1383); +#1383 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#1384 = LINE('',#1385,#1386); +#1385 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#1386 = VECTOR('',#1387,1.); +#1387 = DIRECTION('',(0.,0.,1.)); +#1388 = ORIENTED_EDGE('',*,*,#1389,.F.); +#1389 = EDGE_CURVE('',#1354,#1382,#1390,.T.); +#1390 = LINE('',#1391,#1392); +#1391 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#1392 = VECTOR('',#1393,1.); +#1393 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#1394 = PLANE('',#1395); +#1395 = AXIS2_PLACEMENT_3D('',#1396,#1397,#1398); +#1396 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#1397 = DIRECTION('',(2.115391936753E-16,1.,0.)); +#1398 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#1399 = ADVANCED_FACE('',(#1400),#1411,.F.); +#1400 = FACE_BOUND('',#1401,.F.); +#1401 = EDGE_LOOP('',(#1402,#1403,#1404,#1405)); +#1402 = ORIENTED_EDGE('',*,*,#1299,.T.); +#1403 = ORIENTED_EDGE('',*,*,#1032,.T.); +#1404 = ORIENTED_EDGE('',*,*,#1239,.F.); +#1405 = ORIENTED_EDGE('',*,*,#1406,.F.); +#1406 = EDGE_CURVE('',#1300,#1240,#1407,.T.); +#1407 = LINE('',#1408,#1409); +#1408 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#1409 = VECTOR('',#1410,1.); +#1410 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1411 = PLANE('',#1412); +#1412 = AXIS2_PLACEMENT_3D('',#1413,#1414,#1415); +#1413 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#1414 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1415 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1416 = ADVANCED_FACE('',(#1417),#1428,.F.); +#1417 = FACE_BOUND('',#1418,.F.); +#1418 = EDGE_LOOP('',(#1419,#1420,#1421,#1422)); +#1419 = ORIENTED_EDGE('',*,*,#1381,.T.); +#1420 = ORIENTED_EDGE('',*,*,#1164,.T.); +#1421 = ORIENTED_EDGE('',*,*,#1321,.F.); +#1422 = ORIENTED_EDGE('',*,*,#1423,.F.); +#1423 = EDGE_CURVE('',#1382,#1322,#1424,.T.); +#1424 = LINE('',#1425,#1426); +#1425 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#1426 = VECTOR('',#1427,1.); +#1427 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#1428 = PLANE('',#1429); +#1429 = AXIS2_PLACEMENT_3D('',#1430,#1431,#1432); +#1430 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#1431 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#1432 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#1433 = ADVANCED_FACE('',(#1434),#1475,.T.); +#1434 = FACE_BOUND('',#1435,.T.); +#1435 = EDGE_LOOP('',(#1436,#1447,#1467,#1468)); +#1436 = ORIENTED_EDGE('',*,*,#1437,.T.); +#1437 = EDGE_CURVE('',#1438,#1440,#1442,.T.); +#1438 = VERTEX_POINT('',#1439); +#1439 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16,10.)); +#1440 = VERTEX_POINT('',#1441); +#1441 = CARTESIAN_POINT('',(1.2,3.25234957804,10.)); +#1442 = CIRCLE('',#1443,3.466666666667); +#1443 = AXIS2_PLACEMENT_3D('',#1444,#1445,#1446); +#1444 = CARTESIAN_POINT('',(0.,0.,10.)); +#1445 = DIRECTION('',(0.,0.,-1.)); +#1446 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1447 = ORIENTED_EDGE('',*,*,#1448,.F.); +#1448 = EDGE_CURVE('',#1197,#1440,#1449,.T.); +#1449 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#1450,#1451,#1452,#1453,#1454, + #1455,#1456,#1457,#1458,#1459,#1460,#1461,#1462,#1463,#1464,#1465, + #1466),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0.,0.297890205936, + 0.596186610785,1.),.UNSPECIFIED.); +#1450 = CARTESIAN_POINT('',(1.2,3.815756805668,9.466666666667)); +#1451 = CARTESIAN_POINT('',(1.2,3.815756801262,9.508696495753)); +#1452 = CARTESIAN_POINT('',(1.2,3.811590213401,9.55072831062)); +#1453 = CARTESIAN_POINT('',(1.2,3.803256501026,9.592270940133)); +#1454 = CARTESIAN_POINT('',(1.2,3.790843032593,9.632840928873)); +#1455 = CARTESIAN_POINT('',(1.2,3.774517833109,9.67197923621)); +#1456 = CARTESIAN_POINT('',(1.2,3.734499563645,9.746607480905)); +#1457 = CARTESIAN_POINT('',(1.2,3.710794784471,9.782095435341)); +#1458 = CARTESIAN_POINT('',(1.2,3.68364943293,9.815312213315)); +#1459 = CARTESIAN_POINT('',(1.2,3.653371267561,9.845890583241)); +#1460 = CARTESIAN_POINT('',(1.2,3.620319306473,9.873521824448)); +#1461 = CARTESIAN_POINT('',(1.2,3.536925313459,9.931047175461)); +#1462 = CARTESIAN_POINT('',(1.2,3.484598693754,9.958287259873)); +#1463 = CARTESIAN_POINT('',(1.2,3.428888029485,9.979074916341)); +#1464 = CARTESIAN_POINT('',(1.2,3.37087149716,9.993034515606)); +#1465 = CARTESIAN_POINT('',(1.2,3.311655602221,9.999999994454)); +#1466 = CARTESIAN_POINT('',(1.2,3.25234957804,10.)); +#1467 = ORIENTED_EDGE('',*,*,#1196,.F.); +#1468 = ORIENTED_EDGE('',*,*,#1469,.T.); +#1469 = EDGE_CURVE('',#1189,#1438,#1470,.T.); +#1470 = CIRCLE('',#1471,0.533333333333); +#1471 = AXIS2_PLACEMENT_3D('',#1472,#1473,#1474); +#1472 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16, + 9.466666666667)); +#1473 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#1474 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1475 = TOROIDAL_SURFACE('',#1476,3.466666666667,0.533333333333); +#1476 = AXIS2_PLACEMENT_3D('',#1477,#1478,#1479); +#1477 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1478 = DIRECTION('',(0.,0.,1.)); +#1479 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1480 = ADVANCED_FACE('',(#1481),#1515,.T.); +#1481 = FACE_BOUND('',#1482,.T.); +#1482 = EDGE_LOOP('',(#1483,#1492,#1512,#1513,#1514)); +#1483 = ORIENTED_EDGE('',*,*,#1484,.T.); +#1484 = EDGE_CURVE('',#1440,#1485,#1487,.T.); +#1485 = VERTEX_POINT('',#1486); +#1486 = CARTESIAN_POINT('',(1.2,-3.25234957804,10.)); +#1487 = CIRCLE('',#1488,3.466666666667); +#1488 = AXIS2_PLACEMENT_3D('',#1489,#1490,#1491); +#1489 = CARTESIAN_POINT('',(0.,0.,10.)); +#1490 = DIRECTION('',(0.,0.,-1.)); +#1491 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1492 = ORIENTED_EDGE('',*,*,#1493,.F.); +#1493 = EDGE_CURVE('',#1215,#1485,#1494,.T.); +#1494 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#1495,#1496,#1497,#1498,#1499, + #1500,#1501,#1502,#1503,#1504,#1505,#1506,#1507,#1508,#1509,#1510, + #1511),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0.,0.297890205938, + 0.596186610786,1.),.UNSPECIFIED.); +#1495 = CARTESIAN_POINT('',(1.2,-3.815756805668,9.466666666667)); +#1496 = CARTESIAN_POINT('',(1.2,-3.815756801262,9.508696495753)); +#1497 = CARTESIAN_POINT('',(1.2,-3.811590213401,9.55072831062)); +#1498 = CARTESIAN_POINT('',(1.2,-3.803256501026,9.592270940134)); +#1499 = CARTESIAN_POINT('',(1.2,-3.790843032593,9.632840928873)); +#1500 = CARTESIAN_POINT('',(1.2,-3.774517833109,9.671979236211)); +#1501 = CARTESIAN_POINT('',(1.2,-3.734499563644,9.746607480907)); +#1502 = CARTESIAN_POINT('',(1.2,-3.71079478447,9.782095435342)); +#1503 = CARTESIAN_POINT('',(1.2,-3.683649432929,9.815312213316)); +#1504 = CARTESIAN_POINT('',(1.2,-3.65337126756,9.845890583242)); +#1505 = CARTESIAN_POINT('',(1.2,-3.620319306472,9.873521824448)); +#1506 = CARTESIAN_POINT('',(1.2,-3.536925313457,9.931047175461)); +#1507 = CARTESIAN_POINT('',(1.2,-3.484598693753,9.958287259873)); +#1508 = CARTESIAN_POINT('',(1.2,-3.428888029485,9.979074916341)); +#1509 = CARTESIAN_POINT('',(1.2,-3.370871497159,9.993034515606)); +#1510 = CARTESIAN_POINT('',(1.2,-3.311655602221,9.999999994454)); +#1511 = CARTESIAN_POINT('',(1.2,-3.25234957804,10.)); +#1512 = ORIENTED_EDGE('',*,*,#1214,.F.); +#1513 = ORIENTED_EDGE('',*,*,#1205,.F.); +#1514 = ORIENTED_EDGE('',*,*,#1448,.T.); +#1515 = TOROIDAL_SURFACE('',#1516,3.466666666667,0.533333333333); +#1516 = AXIS2_PLACEMENT_3D('',#1517,#1518,#1519); +#1517 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1518 = DIRECTION('',(0.,0.,1.)); +#1519 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1520 = ADVANCED_FACE('',(#1521),#1533,.T.); +#1521 = FACE_BOUND('',#1522,.T.); +#1522 = EDGE_LOOP('',(#1523,#1524,#1531,#1532)); +#1523 = ORIENTED_EDGE('',*,*,#1493,.T.); +#1524 = ORIENTED_EDGE('',*,*,#1525,.T.); +#1525 = EDGE_CURVE('',#1485,#1438,#1526,.T.); +#1526 = CIRCLE('',#1527,3.466666666667); +#1527 = AXIS2_PLACEMENT_3D('',#1528,#1529,#1530); +#1528 = CARTESIAN_POINT('',(0.,0.,10.)); +#1529 = DIRECTION('',(0.,0.,-1.)); +#1530 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1531 = ORIENTED_EDGE('',*,*,#1469,.F.); +#1532 = ORIENTED_EDGE('',*,*,#1223,.F.); +#1533 = TOROIDAL_SURFACE('',#1534,3.466666666667,0.533333333333); +#1534 = AXIS2_PLACEMENT_3D('',#1535,#1536,#1537); +#1535 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1536 = DIRECTION('',(0.,0.,1.)); +#1537 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1538 = ADVANCED_FACE('',(#1539),#1545,.F.); +#1539 = FACE_BOUND('',#1540,.F.); +#1540 = EDGE_LOOP('',(#1541,#1542,#1543,#1544)); +#1541 = ORIENTED_EDGE('',*,*,#1406,.T.); +#1542 = ORIENTED_EDGE('',*,*,#1257,.T.); +#1543 = ORIENTED_EDGE('',*,*,#1271,.T.); +#1544 = ORIENTED_EDGE('',*,*,#1307,.T.); +#1545 = PLANE('',#1546); +#1546 = AXIS2_PLACEMENT_3D('',#1547,#1548,#1549); +#1547 = CARTESIAN_POINT('',(-3.000096934556,3.808225032462E-16,0.)); +#1548 = DIRECTION('',(0.,0.,1.)); +#1549 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1550 = ADVANCED_FACE('',(#1551),#1557,.F.); +#1551 = FACE_BOUND('',#1552,.F.); +#1552 = EDGE_LOOP('',(#1553,#1554,#1555,#1556)); +#1553 = ORIENTED_EDGE('',*,*,#1423,.T.); +#1554 = ORIENTED_EDGE('',*,*,#1339,.T.); +#1555 = ORIENTED_EDGE('',*,*,#1353,.T.); +#1556 = ORIENTED_EDGE('',*,*,#1389,.T.); +#1557 = PLANE('',#1558); +#1558 = AXIS2_PLACEMENT_3D('',#1559,#1560,#1561); +#1559 = CARTESIAN_POINT('',(3.000096934556,-7.482284140497E-16,0.)); +#1560 = DIRECTION('',(0.,0.,1.)); +#1561 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#1562 = ADVANCED_FACE('',(#1563),#1573,.F.); +#1563 = FACE_BOUND('',#1564,.F.); +#1564 = EDGE_LOOP('',(#1565,#1566,#1567)); +#1565 = ORIENTED_EDGE('',*,*,#1525,.T.); +#1566 = ORIENTED_EDGE('',*,*,#1437,.T.); +#1567 = ORIENTED_EDGE('',*,*,#1568,.T.); +#1568 = EDGE_CURVE('',#1440,#1485,#1569,.T.); +#1569 = LINE('',#1570,#1571); +#1570 = CARTESIAN_POINT('',(1.2,4.,10.)); +#1571 = VECTOR('',#1572,1.); +#1572 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1573 = PLANE('',#1574); +#1574 = AXIS2_PLACEMENT_3D('',#1575,#1576,#1577); +#1575 = CARTESIAN_POINT('',(0.,0.,10.)); +#1576 = DIRECTION('',(-0.,0.,-1.)); +#1577 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1578 = ADVANCED_FACE('',(#1579),#1583,.T.); +#1579 = FACE_BOUND('',#1580,.T.); +#1580 = EDGE_LOOP('',(#1581,#1582)); +#1581 = ORIENTED_EDGE('',*,*,#1484,.F.); +#1582 = ORIENTED_EDGE('',*,*,#1568,.T.); +#1583 = PLANE('',#1584); +#1584 = AXIS2_PLACEMENT_3D('',#1585,#1586,#1587); +#1585 = CARTESIAN_POINT('',(4.,4.,10.)); +#1586 = DIRECTION('',(0.,0.,1.)); +#1587 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1592)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1589,#1590,#1591)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1589 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1590 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1591 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1592 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#1589, + 'distance_accuracy_value','confusion accuracy'); +#1593 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1594,#1596); +#1594 = ( REPRESENTATION_RELATIONSHIP('','',#224,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1595) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#1595 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15); +#1596 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #1597); +#1597 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','C1','',#5,#219,$); +#1598 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#221)); +#1599 = SHAPE_DEFINITION_REPRESENTATION(#1600,#1606); +#1600 = PRODUCT_DEFINITION_SHAPE('','',#1601); +#1601 = PRODUCT_DEFINITION('design','',#1602,#1605); +#1602 = PRODUCT_DEFINITION_FORMATION('','',#1603); +#1603 = PRODUCT('C_0603_1608Metric','C_0603_1608Metric','',(#1604)); +#1604 = PRODUCT_CONTEXT('',#2,'mechanical'); +#1605 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#1606 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#1607),#2461); +#1607 = MANIFOLD_SOLID_BREP('',#1608); +#1608 = CLOSED_SHELL('',(#1609,#1685,#1716,#1741,#1766,#1790,#1814,#1839 + ,#1864,#1881,#1967,#1999,#2023,#2048,#2072,#2097,#2121,#2146,#2163, + #2249,#2280,#2305,#2330,#2354,#2378,#2403,#2428,#2445)); +#1609 = ADVANCED_FACE('',(#1610),#1680,.F.); +#1610 = FACE_BOUND('',#1611,.F.); +#1611 = EDGE_LOOP('',(#1612,#1622,#1631,#1639,#1648,#1656,#1665,#1673)); +#1612 = ORIENTED_EDGE('',*,*,#1613,.F.); +#1613 = EDGE_CURVE('',#1614,#1616,#1618,.T.); +#1614 = VERTEX_POINT('',#1615); +#1615 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#1616 = VERTEX_POINT('',#1617); +#1617 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#1618 = LINE('',#1619,#1620); +#1619 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1620 = VECTOR('',#1621,1.); +#1621 = DIRECTION('',(0.,0.,1.)); +#1622 = ORIENTED_EDGE('',*,*,#1623,.T.); +#1623 = EDGE_CURVE('',#1614,#1624,#1626,.T.); +#1624 = VERTEX_POINT('',#1625); +#1625 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#1626 = CIRCLE('',#1627,3.E-02); +#1627 = AXIS2_PLACEMENT_3D('',#1628,#1629,#1630); +#1628 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#1629 = DIRECTION('',(1.,0.,-0.)); +#1630 = DIRECTION('',(0.,0.,1.)); +#1631 = ORIENTED_EDGE('',*,*,#1632,.T.); +#1632 = EDGE_CURVE('',#1624,#1633,#1635,.T.); +#1633 = VERTEX_POINT('',#1634); +#1634 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#1635 = LINE('',#1636,#1637); +#1636 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1637 = VECTOR('',#1638,1.); +#1638 = DIRECTION('',(0.,1.,0.)); +#1639 = ORIENTED_EDGE('',*,*,#1640,.F.); +#1640 = EDGE_CURVE('',#1641,#1633,#1643,.T.); +#1641 = VERTEX_POINT('',#1642); +#1642 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#1643 = CIRCLE('',#1644,3.E-02); +#1644 = AXIS2_PLACEMENT_3D('',#1645,#1646,#1647); +#1645 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#1646 = DIRECTION('',(-1.,0.,0.)); +#1647 = DIRECTION('',(0.,0.,1.)); +#1648 = ORIENTED_EDGE('',*,*,#1649,.T.); +#1649 = EDGE_CURVE('',#1641,#1650,#1652,.T.); +#1650 = VERTEX_POINT('',#1651); +#1651 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#1652 = LINE('',#1653,#1654); +#1653 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#1654 = VECTOR('',#1655,1.); +#1655 = DIRECTION('',(0.,0.,1.)); +#1656 = ORIENTED_EDGE('',*,*,#1657,.T.); +#1657 = EDGE_CURVE('',#1650,#1658,#1660,.T.); +#1658 = VERTEX_POINT('',#1659); +#1659 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#1660 = CIRCLE('',#1661,3.E-02); +#1661 = AXIS2_PLACEMENT_3D('',#1662,#1663,#1664); +#1662 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#1663 = DIRECTION('',(1.,0.,-0.)); +#1664 = DIRECTION('',(0.,0.,1.)); +#1665 = ORIENTED_EDGE('',*,*,#1666,.F.); +#1666 = EDGE_CURVE('',#1667,#1658,#1669,.T.); +#1667 = VERTEX_POINT('',#1668); +#1668 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#1669 = LINE('',#1670,#1671); +#1670 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#1671 = VECTOR('',#1672,1.); +#1672 = DIRECTION('',(0.,1.,0.)); +#1673 = ORIENTED_EDGE('',*,*,#1674,.F.); +#1674 = EDGE_CURVE('',#1616,#1667,#1675,.T.); +#1675 = CIRCLE('',#1676,3.E-02); +#1676 = AXIS2_PLACEMENT_3D('',#1677,#1678,#1679); +#1677 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#1678 = DIRECTION('',(-1.,0.,0.)); +#1679 = DIRECTION('',(0.,0.,1.)); +#1680 = PLANE('',#1681); +#1681 = AXIS2_PLACEMENT_3D('',#1682,#1683,#1684); +#1682 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1683 = DIRECTION('',(1.,0.,0.)); +#1684 = DIRECTION('',(0.,0.,1.)); +#1685 = ADVANCED_FACE('',(#1686),#1711,.F.); +#1686 = FACE_BOUND('',#1687,.F.); +#1687 = EDGE_LOOP('',(#1688,#1698,#1704,#1705)); +#1688 = ORIENTED_EDGE('',*,*,#1689,.F.); +#1689 = EDGE_CURVE('',#1690,#1692,#1694,.T.); +#1690 = VERTEX_POINT('',#1691); +#1691 = CARTESIAN_POINT('',(-0.5,-0.4,3.E-02)); +#1692 = VERTEX_POINT('',#1693); +#1693 = CARTESIAN_POINT('',(-0.5,-0.4,0.77)); +#1694 = LINE('',#1695,#1696); +#1695 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#1696 = VECTOR('',#1697,1.); +#1697 = DIRECTION('',(0.,0.,1.)); +#1698 = ORIENTED_EDGE('',*,*,#1699,.F.); +#1699 = EDGE_CURVE('',#1614,#1690,#1700,.T.); +#1700 = LINE('',#1701,#1702); +#1701 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#1702 = VECTOR('',#1703,1.); +#1703 = DIRECTION('',(1.,0.,0.)); +#1704 = ORIENTED_EDGE('',*,*,#1613,.T.); +#1705 = ORIENTED_EDGE('',*,*,#1706,.T.); +#1706 = EDGE_CURVE('',#1616,#1692,#1707,.T.); +#1707 = LINE('',#1708,#1709); +#1708 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#1709 = VECTOR('',#1710,1.); +#1710 = DIRECTION('',(1.,0.,0.)); +#1711 = PLANE('',#1712); +#1712 = AXIS2_PLACEMENT_3D('',#1713,#1714,#1715); +#1713 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1714 = DIRECTION('',(0.,1.,0.)); +#1715 = DIRECTION('',(0.,-0.,1.)); +#1716 = ADVANCED_FACE('',(#1717),#1736,.T.); +#1717 = FACE_BOUND('',#1718,.T.); +#1718 = EDGE_LOOP('',(#1719,#1720,#1728,#1735)); +#1719 = ORIENTED_EDGE('',*,*,#1623,.T.); +#1720 = ORIENTED_EDGE('',*,*,#1721,.T.); +#1721 = EDGE_CURVE('',#1624,#1722,#1724,.T.); +#1722 = VERTEX_POINT('',#1723); +#1723 = CARTESIAN_POINT('',(-0.5,-0.37,0.)); +#1724 = LINE('',#1725,#1726); +#1725 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#1726 = VECTOR('',#1727,1.); +#1727 = DIRECTION('',(1.,0.,0.)); +#1728 = ORIENTED_EDGE('',*,*,#1729,.F.); +#1729 = EDGE_CURVE('',#1690,#1722,#1730,.T.); +#1730 = CIRCLE('',#1731,3.E-02); +#1731 = AXIS2_PLACEMENT_3D('',#1732,#1733,#1734); +#1732 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#1733 = DIRECTION('',(1.,0.,-0.)); +#1734 = DIRECTION('',(0.,0.,1.)); +#1735 = ORIENTED_EDGE('',*,*,#1699,.F.); +#1736 = CYLINDRICAL_SURFACE('',#1737,3.E-02); +#1737 = AXIS2_PLACEMENT_3D('',#1738,#1739,#1740); +#1738 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#1739 = DIRECTION('',(1.,0.,0.)); +#1740 = DIRECTION('',(0.,-1.,0.)); +#1741 = ADVANCED_FACE('',(#1742),#1761,.T.); +#1742 = FACE_BOUND('',#1743,.T.); +#1743 = EDGE_LOOP('',(#1744,#1745,#1754,#1760)); +#1744 = ORIENTED_EDGE('',*,*,#1706,.T.); +#1745 = ORIENTED_EDGE('',*,*,#1746,.T.); +#1746 = EDGE_CURVE('',#1692,#1747,#1749,.T.); +#1747 = VERTEX_POINT('',#1748); +#1748 = CARTESIAN_POINT('',(-0.5,-0.37,0.8)); +#1749 = CIRCLE('',#1750,3.E-02); +#1750 = AXIS2_PLACEMENT_3D('',#1751,#1752,#1753); +#1751 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#1752 = DIRECTION('',(-1.,0.,0.)); +#1753 = DIRECTION('',(0.,0.,1.)); +#1754 = ORIENTED_EDGE('',*,*,#1755,.F.); +#1755 = EDGE_CURVE('',#1667,#1747,#1756,.T.); +#1756 = LINE('',#1757,#1758); +#1757 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#1758 = VECTOR('',#1759,1.); +#1759 = DIRECTION('',(1.,0.,0.)); +#1760 = ORIENTED_EDGE('',*,*,#1674,.F.); +#1761 = CYLINDRICAL_SURFACE('',#1762,3.E-02); +#1762 = AXIS2_PLACEMENT_3D('',#1763,#1764,#1765); +#1763 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#1764 = DIRECTION('',(1.,0.,0.)); +#1765 = DIRECTION('',(0.,-1.,0.)); +#1766 = ADVANCED_FACE('',(#1767),#1785,.F.); +#1767 = FACE_BOUND('',#1768,.F.); +#1768 = EDGE_LOOP('',(#1769,#1770,#1771,#1779)); +#1769 = ORIENTED_EDGE('',*,*,#1632,.F.); +#1770 = ORIENTED_EDGE('',*,*,#1721,.T.); +#1771 = ORIENTED_EDGE('',*,*,#1772,.T.); +#1772 = EDGE_CURVE('',#1722,#1773,#1775,.T.); +#1773 = VERTEX_POINT('',#1774); +#1774 = CARTESIAN_POINT('',(-0.5,0.37,0.)); +#1775 = LINE('',#1776,#1777); +#1776 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#1777 = VECTOR('',#1778,1.); +#1778 = DIRECTION('',(0.,1.,0.)); +#1779 = ORIENTED_EDGE('',*,*,#1780,.F.); +#1780 = EDGE_CURVE('',#1633,#1773,#1781,.T.); +#1781 = LINE('',#1782,#1783); +#1782 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#1783 = VECTOR('',#1784,1.); +#1784 = DIRECTION('',(1.,0.,0.)); +#1785 = PLANE('',#1786); +#1786 = AXIS2_PLACEMENT_3D('',#1787,#1788,#1789); +#1787 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1788 = DIRECTION('',(0.,0.,1.)); +#1789 = DIRECTION('',(1.,0.,-0.)); +#1790 = ADVANCED_FACE('',(#1791),#1809,.T.); +#1791 = FACE_BOUND('',#1792,.T.); +#1792 = EDGE_LOOP('',(#1793,#1794,#1795,#1803)); +#1793 = ORIENTED_EDGE('',*,*,#1666,.F.); +#1794 = ORIENTED_EDGE('',*,*,#1755,.T.); +#1795 = ORIENTED_EDGE('',*,*,#1796,.T.); +#1796 = EDGE_CURVE('',#1747,#1797,#1799,.T.); +#1797 = VERTEX_POINT('',#1798); +#1798 = CARTESIAN_POINT('',(-0.5,0.37,0.8)); +#1799 = LINE('',#1800,#1801); +#1800 = CARTESIAN_POINT('',(-0.5,-0.4,0.8)); +#1801 = VECTOR('',#1802,1.); +#1802 = DIRECTION('',(0.,1.,0.)); +#1803 = ORIENTED_EDGE('',*,*,#1804,.F.); +#1804 = EDGE_CURVE('',#1658,#1797,#1805,.T.); +#1805 = LINE('',#1806,#1807); +#1806 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#1807 = VECTOR('',#1808,1.); +#1808 = DIRECTION('',(1.,0.,0.)); +#1809 = PLANE('',#1810); +#1810 = AXIS2_PLACEMENT_3D('',#1811,#1812,#1813); +#1811 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#1812 = DIRECTION('',(0.,0.,1.)); +#1813 = DIRECTION('',(1.,0.,-0.)); +#1814 = ADVANCED_FACE('',(#1815),#1834,.T.); +#1815 = FACE_BOUND('',#1816,.T.); +#1816 = EDGE_LOOP('',(#1817,#1825,#1832,#1833)); +#1817 = ORIENTED_EDGE('',*,*,#1818,.T.); +#1818 = EDGE_CURVE('',#1641,#1819,#1821,.T.); +#1819 = VERTEX_POINT('',#1820); +#1820 = CARTESIAN_POINT('',(-0.5,0.4,3.E-02)); +#1821 = LINE('',#1822,#1823); +#1822 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#1823 = VECTOR('',#1824,1.); +#1824 = DIRECTION('',(1.,0.,0.)); +#1825 = ORIENTED_EDGE('',*,*,#1826,.T.); +#1826 = EDGE_CURVE('',#1819,#1773,#1827,.T.); +#1827 = CIRCLE('',#1828,3.E-02); +#1828 = AXIS2_PLACEMENT_3D('',#1829,#1830,#1831); +#1829 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#1830 = DIRECTION('',(-1.,0.,0.)); +#1831 = DIRECTION('',(0.,0.,1.)); +#1832 = ORIENTED_EDGE('',*,*,#1780,.F.); +#1833 = ORIENTED_EDGE('',*,*,#1640,.F.); +#1834 = CYLINDRICAL_SURFACE('',#1835,3.E-02); +#1835 = AXIS2_PLACEMENT_3D('',#1836,#1837,#1838); +#1836 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#1837 = DIRECTION('',(1.,0.,0.)); +#1838 = DIRECTION('',(-0.,1.,0.)); +#1839 = ADVANCED_FACE('',(#1840),#1859,.T.); +#1840 = FACE_BOUND('',#1841,.T.); +#1841 = EDGE_LOOP('',(#1842,#1843,#1844,#1853)); +#1842 = ORIENTED_EDGE('',*,*,#1657,.T.); +#1843 = ORIENTED_EDGE('',*,*,#1804,.T.); +#1844 = ORIENTED_EDGE('',*,*,#1845,.F.); +#1845 = EDGE_CURVE('',#1846,#1797,#1848,.T.); +#1846 = VERTEX_POINT('',#1847); +#1847 = CARTESIAN_POINT('',(-0.5,0.4,0.77)); +#1848 = CIRCLE('',#1849,3.E-02); +#1849 = AXIS2_PLACEMENT_3D('',#1850,#1851,#1852); +#1850 = CARTESIAN_POINT('',(-0.5,0.37,0.77)); +#1851 = DIRECTION('',(1.,0.,-0.)); +#1852 = DIRECTION('',(0.,0.,1.)); +#1853 = ORIENTED_EDGE('',*,*,#1854,.F.); +#1854 = EDGE_CURVE('',#1650,#1846,#1855,.T.); +#1855 = LINE('',#1856,#1857); +#1856 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#1857 = VECTOR('',#1858,1.); +#1858 = DIRECTION('',(1.,0.,0.)); +#1859 = CYLINDRICAL_SURFACE('',#1860,3.E-02); +#1860 = AXIS2_PLACEMENT_3D('',#1861,#1862,#1863); +#1861 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#1862 = DIRECTION('',(1.,0.,0.)); +#1863 = DIRECTION('',(-0.,1.,0.)); +#1864 = ADVANCED_FACE('',(#1865),#1876,.T.); +#1865 = FACE_BOUND('',#1866,.T.); +#1866 = EDGE_LOOP('',(#1867,#1873,#1874,#1875)); +#1867 = ORIENTED_EDGE('',*,*,#1868,.F.); +#1868 = EDGE_CURVE('',#1819,#1846,#1869,.T.); +#1869 = LINE('',#1870,#1871); +#1870 = CARTESIAN_POINT('',(-0.5,0.4,0.)); +#1871 = VECTOR('',#1872,1.); +#1872 = DIRECTION('',(0.,0.,1.)); +#1873 = ORIENTED_EDGE('',*,*,#1818,.F.); +#1874 = ORIENTED_EDGE('',*,*,#1649,.T.); +#1875 = ORIENTED_EDGE('',*,*,#1854,.T.); +#1876 = PLANE('',#1877); +#1877 = AXIS2_PLACEMENT_3D('',#1878,#1879,#1880); +#1878 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#1879 = DIRECTION('',(0.,1.,0.)); +#1880 = DIRECTION('',(0.,-0.,1.)); +#1881 = ADVANCED_FACE('',(#1882,#1892),#1962,.T.); +#1882 = FACE_BOUND('',#1883,.T.); +#1883 = EDGE_LOOP('',(#1884,#1885,#1886,#1887,#1888,#1889,#1890,#1891)); +#1884 = ORIENTED_EDGE('',*,*,#1689,.F.); +#1885 = ORIENTED_EDGE('',*,*,#1729,.T.); +#1886 = ORIENTED_EDGE('',*,*,#1772,.T.); +#1887 = ORIENTED_EDGE('',*,*,#1826,.F.); +#1888 = ORIENTED_EDGE('',*,*,#1868,.T.); +#1889 = ORIENTED_EDGE('',*,*,#1845,.T.); +#1890 = ORIENTED_EDGE('',*,*,#1796,.F.); +#1891 = ORIENTED_EDGE('',*,*,#1746,.F.); +#1892 = FACE_BOUND('',#1893,.T.); +#1893 = EDGE_LOOP('',(#1894,#1905,#1913,#1922,#1930,#1939,#1947,#1956)); +#1894 = ORIENTED_EDGE('',*,*,#1895,.F.); +#1895 = EDGE_CURVE('',#1896,#1898,#1900,.T.); +#1896 = VERTEX_POINT('',#1897); +#1897 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#1898 = VERTEX_POINT('',#1899); +#1899 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#1900 = CIRCLE('',#1901,3.E-02); +#1901 = AXIS2_PLACEMENT_3D('',#1902,#1903,#1904); +#1902 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#1903 = DIRECTION('',(1.,0.,-0.)); +#1904 = DIRECTION('',(0.,0.,1.)); +#1905 = ORIENTED_EDGE('',*,*,#1906,.T.); +#1906 = EDGE_CURVE('',#1896,#1907,#1909,.T.); +#1907 = VERTEX_POINT('',#1908); +#1908 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#1909 = LINE('',#1910,#1911); +#1910 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#1911 = VECTOR('',#1912,1.); +#1912 = DIRECTION('',(0.,0.,1.)); +#1913 = ORIENTED_EDGE('',*,*,#1914,.T.); +#1914 = EDGE_CURVE('',#1907,#1915,#1917,.T.); +#1915 = VERTEX_POINT('',#1916); +#1916 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#1917 = CIRCLE('',#1918,3.E-02); +#1918 = AXIS2_PLACEMENT_3D('',#1919,#1920,#1921); +#1919 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#1920 = DIRECTION('',(-1.,0.,0.)); +#1921 = DIRECTION('',(0.,0.,1.)); +#1922 = ORIENTED_EDGE('',*,*,#1923,.T.); +#1923 = EDGE_CURVE('',#1915,#1924,#1926,.T.); +#1924 = VERTEX_POINT('',#1925); +#1925 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#1926 = LINE('',#1927,#1928); +#1927 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#1928 = VECTOR('',#1929,1.); +#1929 = DIRECTION('',(0.,1.,0.)); +#1930 = ORIENTED_EDGE('',*,*,#1931,.F.); +#1931 = EDGE_CURVE('',#1932,#1924,#1934,.T.); +#1932 = VERTEX_POINT('',#1933); +#1933 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#1934 = CIRCLE('',#1935,3.E-02); +#1935 = AXIS2_PLACEMENT_3D('',#1936,#1937,#1938); +#1936 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#1937 = DIRECTION('',(1.,0.,-0.)); +#1938 = DIRECTION('',(0.,0.,1.)); +#1939 = ORIENTED_EDGE('',*,*,#1940,.F.); +#1940 = EDGE_CURVE('',#1941,#1932,#1943,.T.); +#1941 = VERTEX_POINT('',#1942); +#1942 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#1943 = LINE('',#1944,#1945); +#1944 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#1945 = VECTOR('',#1946,1.); +#1946 = DIRECTION('',(0.,0.,1.)); +#1947 = ORIENTED_EDGE('',*,*,#1948,.T.); +#1948 = EDGE_CURVE('',#1941,#1949,#1951,.T.); +#1949 = VERTEX_POINT('',#1950); +#1950 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#1951 = CIRCLE('',#1952,3.E-02); +#1952 = AXIS2_PLACEMENT_3D('',#1953,#1954,#1955); +#1953 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#1954 = DIRECTION('',(-1.,0.,0.)); +#1955 = DIRECTION('',(0.,0.,1.)); +#1956 = ORIENTED_EDGE('',*,*,#1957,.F.); +#1957 = EDGE_CURVE('',#1898,#1949,#1958,.T.); +#1958 = LINE('',#1959,#1960); +#1959 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#1960 = VECTOR('',#1961,1.); +#1961 = DIRECTION('',(0.,1.,0.)); +#1962 = PLANE('',#1963); +#1963 = AXIS2_PLACEMENT_3D('',#1964,#1965,#1966); +#1964 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#1965 = DIRECTION('',(1.,0.,0.)); +#1966 = DIRECTION('',(0.,0.,1.)); +#1967 = ADVANCED_FACE('',(#1968),#1994,.T.); +#1968 = FACE_BOUND('',#1969,.T.); +#1969 = EDGE_LOOP('',(#1970,#1971,#1979,#1988)); +#1970 = ORIENTED_EDGE('',*,*,#1895,.T.); +#1971 = ORIENTED_EDGE('',*,*,#1972,.T.); +#1972 = EDGE_CURVE('',#1898,#1973,#1975,.T.); +#1973 = VERTEX_POINT('',#1974); +#1974 = CARTESIAN_POINT('',(0.5,-0.34,3.E-02)); +#1975 = LINE('',#1976,#1977); +#1976 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#1977 = VECTOR('',#1978,1.); +#1978 = DIRECTION('',(1.,0.,0.)); +#1979 = ORIENTED_EDGE('',*,*,#1980,.F.); +#1980 = EDGE_CURVE('',#1981,#1973,#1983,.T.); +#1981 = VERTEX_POINT('',#1982); +#1982 = CARTESIAN_POINT('',(0.5,-0.37,6.E-02)); +#1983 = CIRCLE('',#1984,3.E-02); +#1984 = AXIS2_PLACEMENT_3D('',#1985,#1986,#1987); +#1985 = CARTESIAN_POINT('',(0.5,-0.34,6.E-02)); +#1986 = DIRECTION('',(1.,0.,-0.)); +#1987 = DIRECTION('',(0.,0.,1.)); +#1988 = ORIENTED_EDGE('',*,*,#1989,.F.); +#1989 = EDGE_CURVE('',#1896,#1981,#1990,.T.); +#1990 = LINE('',#1991,#1992); +#1991 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#1992 = VECTOR('',#1993,1.); +#1993 = DIRECTION('',(1.,0.,0.)); +#1994 = CYLINDRICAL_SURFACE('',#1995,3.E-02); +#1995 = AXIS2_PLACEMENT_3D('',#1996,#1997,#1998); +#1996 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#1997 = DIRECTION('',(1.,0.,0.)); +#1998 = DIRECTION('',(0.,-1.,0.)); +#1999 = ADVANCED_FACE('',(#2000),#2018,.F.); +#2000 = FACE_BOUND('',#2001,.F.); +#2001 = EDGE_LOOP('',(#2002,#2003,#2004,#2012)); +#2002 = ORIENTED_EDGE('',*,*,#1957,.F.); +#2003 = ORIENTED_EDGE('',*,*,#1972,.T.); +#2004 = ORIENTED_EDGE('',*,*,#2005,.T.); +#2005 = EDGE_CURVE('',#1973,#2006,#2008,.T.); +#2006 = VERTEX_POINT('',#2007); +#2007 = CARTESIAN_POINT('',(0.5,0.34,3.E-02)); +#2008 = LINE('',#2009,#2010); +#2009 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#2010 = VECTOR('',#2011,1.); +#2011 = DIRECTION('',(0.,1.,0.)); +#2012 = ORIENTED_EDGE('',*,*,#2013,.F.); +#2013 = EDGE_CURVE('',#1949,#2006,#2014,.T.); +#2014 = LINE('',#2015,#2016); +#2015 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#2016 = VECTOR('',#2017,1.); +#2017 = DIRECTION('',(1.,0.,0.)); +#2018 = PLANE('',#2019); +#2019 = AXIS2_PLACEMENT_3D('',#2020,#2021,#2022); +#2020 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#2021 = DIRECTION('',(0.,0.,1.)); +#2022 = DIRECTION('',(1.,0.,-0.)); +#2023 = ADVANCED_FACE('',(#2024),#2043,.T.); +#2024 = FACE_BOUND('',#2025,.T.); +#2025 = EDGE_LOOP('',(#2026,#2034,#2041,#2042)); +#2026 = ORIENTED_EDGE('',*,*,#2027,.T.); +#2027 = EDGE_CURVE('',#1941,#2028,#2030,.T.); +#2028 = VERTEX_POINT('',#2029); +#2029 = CARTESIAN_POINT('',(0.5,0.37,6.E-02)); +#2030 = LINE('',#2031,#2032); +#2031 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#2032 = VECTOR('',#2033,1.); +#2033 = DIRECTION('',(1.,0.,0.)); +#2034 = ORIENTED_EDGE('',*,*,#2035,.T.); +#2035 = EDGE_CURVE('',#2028,#2006,#2036,.T.); +#2036 = CIRCLE('',#2037,3.E-02); +#2037 = AXIS2_PLACEMENT_3D('',#2038,#2039,#2040); +#2038 = CARTESIAN_POINT('',(0.5,0.34,6.E-02)); +#2039 = DIRECTION('',(-1.,0.,0.)); +#2040 = DIRECTION('',(0.,0.,1.)); +#2041 = ORIENTED_EDGE('',*,*,#2013,.F.); +#2042 = ORIENTED_EDGE('',*,*,#1948,.F.); +#2043 = CYLINDRICAL_SURFACE('',#2044,3.E-02); +#2044 = AXIS2_PLACEMENT_3D('',#2045,#2046,#2047); +#2045 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#2046 = DIRECTION('',(1.,0.,0.)); +#2047 = DIRECTION('',(-0.,1.,0.)); +#2048 = ADVANCED_FACE('',(#2049),#2067,.T.); +#2049 = FACE_BOUND('',#2050,.T.); +#2050 = EDGE_LOOP('',(#2051,#2059,#2060,#2061)); +#2051 = ORIENTED_EDGE('',*,*,#2052,.F.); +#2052 = EDGE_CURVE('',#2028,#2053,#2055,.T.); +#2053 = VERTEX_POINT('',#2054); +#2054 = CARTESIAN_POINT('',(0.5,0.37,0.74)); +#2055 = LINE('',#2056,#2057); +#2056 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#2057 = VECTOR('',#2058,1.); +#2058 = DIRECTION('',(0.,0.,1.)); +#2059 = ORIENTED_EDGE('',*,*,#2027,.F.); +#2060 = ORIENTED_EDGE('',*,*,#1940,.T.); +#2061 = ORIENTED_EDGE('',*,*,#2062,.T.); +#2062 = EDGE_CURVE('',#1932,#2053,#2063,.T.); +#2063 = LINE('',#2064,#2065); +#2064 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#2065 = VECTOR('',#2066,1.); +#2066 = DIRECTION('',(1.,0.,0.)); +#2067 = PLANE('',#2068); +#2068 = AXIS2_PLACEMENT_3D('',#2069,#2070,#2071); +#2069 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#2070 = DIRECTION('',(0.,1.,0.)); +#2071 = DIRECTION('',(0.,-0.,1.)); +#2072 = ADVANCED_FACE('',(#2073),#2092,.T.); +#2073 = FACE_BOUND('',#2074,.T.); +#2074 = EDGE_LOOP('',(#2075,#2076,#2084,#2091)); +#2075 = ORIENTED_EDGE('',*,*,#1931,.T.); +#2076 = ORIENTED_EDGE('',*,*,#2077,.T.); +#2077 = EDGE_CURVE('',#1924,#2078,#2080,.T.); +#2078 = VERTEX_POINT('',#2079); +#2079 = CARTESIAN_POINT('',(0.5,0.34,0.77)); +#2080 = LINE('',#2081,#2082); +#2081 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#2082 = VECTOR('',#2083,1.); +#2083 = DIRECTION('',(1.,0.,0.)); +#2084 = ORIENTED_EDGE('',*,*,#2085,.F.); +#2085 = EDGE_CURVE('',#2053,#2078,#2086,.T.); +#2086 = CIRCLE('',#2087,3.E-02); +#2087 = AXIS2_PLACEMENT_3D('',#2088,#2089,#2090); +#2088 = CARTESIAN_POINT('',(0.5,0.34,0.74)); +#2089 = DIRECTION('',(1.,0.,-0.)); +#2090 = DIRECTION('',(0.,0.,1.)); +#2091 = ORIENTED_EDGE('',*,*,#2062,.F.); +#2092 = CYLINDRICAL_SURFACE('',#2093,3.E-02); +#2093 = AXIS2_PLACEMENT_3D('',#2094,#2095,#2096); +#2094 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#2095 = DIRECTION('',(1.,0.,0.)); +#2096 = DIRECTION('',(-0.,1.,0.)); +#2097 = ADVANCED_FACE('',(#2098),#2116,.T.); +#2098 = FACE_BOUND('',#2099,.T.); +#2099 = EDGE_LOOP('',(#2100,#2101,#2109,#2115)); +#2100 = ORIENTED_EDGE('',*,*,#1923,.F.); +#2101 = ORIENTED_EDGE('',*,*,#2102,.T.); +#2102 = EDGE_CURVE('',#1915,#2103,#2105,.T.); +#2103 = VERTEX_POINT('',#2104); +#2104 = CARTESIAN_POINT('',(0.5,-0.34,0.77)); +#2105 = LINE('',#2106,#2107); +#2106 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#2107 = VECTOR('',#2108,1.); +#2108 = DIRECTION('',(1.,0.,0.)); +#2109 = ORIENTED_EDGE('',*,*,#2110,.T.); +#2110 = EDGE_CURVE('',#2103,#2078,#2111,.T.); +#2111 = LINE('',#2112,#2113); +#2112 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#2113 = VECTOR('',#2114,1.); +#2114 = DIRECTION('',(0.,1.,0.)); +#2115 = ORIENTED_EDGE('',*,*,#2077,.F.); +#2116 = PLANE('',#2117); +#2117 = AXIS2_PLACEMENT_3D('',#2118,#2119,#2120); +#2118 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#2119 = DIRECTION('',(0.,0.,1.)); +#2120 = DIRECTION('',(1.,0.,-0.)); +#2121 = ADVANCED_FACE('',(#2122),#2141,.T.); +#2122 = FACE_BOUND('',#2123,.T.); +#2123 = EDGE_LOOP('',(#2124,#2132,#2139,#2140)); +#2124 = ORIENTED_EDGE('',*,*,#2125,.T.); +#2125 = EDGE_CURVE('',#1907,#2126,#2128,.T.); +#2126 = VERTEX_POINT('',#2127); +#2127 = CARTESIAN_POINT('',(0.5,-0.37,0.74)); +#2128 = LINE('',#2129,#2130); +#2129 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#2130 = VECTOR('',#2131,1.); +#2131 = DIRECTION('',(1.,0.,0.)); +#2132 = ORIENTED_EDGE('',*,*,#2133,.T.); +#2133 = EDGE_CURVE('',#2126,#2103,#2134,.T.); +#2134 = CIRCLE('',#2135,3.E-02); +#2135 = AXIS2_PLACEMENT_3D('',#2136,#2137,#2138); +#2136 = CARTESIAN_POINT('',(0.5,-0.34,0.74)); +#2137 = DIRECTION('',(-1.,0.,0.)); +#2138 = DIRECTION('',(0.,0.,1.)); +#2139 = ORIENTED_EDGE('',*,*,#2102,.F.); +#2140 = ORIENTED_EDGE('',*,*,#1914,.F.); +#2141 = CYLINDRICAL_SURFACE('',#2142,3.E-02); +#2142 = AXIS2_PLACEMENT_3D('',#2143,#2144,#2145); +#2143 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#2144 = DIRECTION('',(1.,0.,0.)); +#2145 = DIRECTION('',(0.,-1.,0.)); +#2146 = ADVANCED_FACE('',(#2147),#2158,.F.); +#2147 = FACE_BOUND('',#2148,.F.); +#2148 = EDGE_LOOP('',(#2149,#2155,#2156,#2157)); +#2149 = ORIENTED_EDGE('',*,*,#2150,.F.); +#2150 = EDGE_CURVE('',#1981,#2126,#2151,.T.); +#2151 = LINE('',#2152,#2153); +#2152 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#2153 = VECTOR('',#2154,1.); +#2154 = DIRECTION('',(0.,0.,1.)); +#2155 = ORIENTED_EDGE('',*,*,#1989,.F.); +#2156 = ORIENTED_EDGE('',*,*,#1906,.T.); +#2157 = ORIENTED_EDGE('',*,*,#2125,.T.); +#2158 = PLANE('',#2159); +#2159 = AXIS2_PLACEMENT_3D('',#2160,#2161,#2162); +#2160 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#2161 = DIRECTION('',(0.,1.,0.)); +#2162 = DIRECTION('',(0.,-0.,1.)); +#2163 = ADVANCED_FACE('',(#2164,#2234),#2244,.F.); +#2164 = FACE_BOUND('',#2165,.F.); +#2165 = EDGE_LOOP('',(#2166,#2176,#2185,#2193,#2202,#2210,#2219,#2227)); +#2166 = ORIENTED_EDGE('',*,*,#2167,.F.); +#2167 = EDGE_CURVE('',#2168,#2170,#2172,.T.); +#2168 = VERTEX_POINT('',#2169); +#2169 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#2170 = VERTEX_POINT('',#2171); +#2171 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#2172 = LINE('',#2173,#2174); +#2173 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2174 = VECTOR('',#2175,1.); +#2175 = DIRECTION('',(0.,0.,1.)); +#2176 = ORIENTED_EDGE('',*,*,#2177,.T.); +#2177 = EDGE_CURVE('',#2168,#2178,#2180,.T.); +#2178 = VERTEX_POINT('',#2179); +#2179 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#2180 = CIRCLE('',#2181,3.E-02); +#2181 = AXIS2_PLACEMENT_3D('',#2182,#2183,#2184); +#2182 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#2183 = DIRECTION('',(1.,0.,-0.)); +#2184 = DIRECTION('',(0.,0.,1.)); +#2185 = ORIENTED_EDGE('',*,*,#2186,.T.); +#2186 = EDGE_CURVE('',#2178,#2187,#2189,.T.); +#2187 = VERTEX_POINT('',#2188); +#2188 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#2189 = LINE('',#2190,#2191); +#2190 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2191 = VECTOR('',#2192,1.); +#2192 = DIRECTION('',(0.,1.,0.)); +#2193 = ORIENTED_EDGE('',*,*,#2194,.F.); +#2194 = EDGE_CURVE('',#2195,#2187,#2197,.T.); +#2195 = VERTEX_POINT('',#2196); +#2196 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#2197 = CIRCLE('',#2198,3.E-02); +#2198 = AXIS2_PLACEMENT_3D('',#2199,#2200,#2201); +#2199 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#2200 = DIRECTION('',(-1.,0.,0.)); +#2201 = DIRECTION('',(0.,0.,1.)); +#2202 = ORIENTED_EDGE('',*,*,#2203,.T.); +#2203 = EDGE_CURVE('',#2195,#2204,#2206,.T.); +#2204 = VERTEX_POINT('',#2205); +#2205 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#2206 = LINE('',#2207,#2208); +#2207 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#2208 = VECTOR('',#2209,1.); +#2209 = DIRECTION('',(0.,0.,1.)); +#2210 = ORIENTED_EDGE('',*,*,#2211,.T.); +#2211 = EDGE_CURVE('',#2204,#2212,#2214,.T.); +#2212 = VERTEX_POINT('',#2213); +#2213 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#2214 = CIRCLE('',#2215,3.E-02); +#2215 = AXIS2_PLACEMENT_3D('',#2216,#2217,#2218); +#2216 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#2217 = DIRECTION('',(1.,0.,-0.)); +#2218 = DIRECTION('',(0.,0.,1.)); +#2219 = ORIENTED_EDGE('',*,*,#2220,.F.); +#2220 = EDGE_CURVE('',#2221,#2212,#2223,.T.); +#2221 = VERTEX_POINT('',#2222); +#2222 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#2223 = LINE('',#2224,#2225); +#2224 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#2225 = VECTOR('',#2226,1.); +#2226 = DIRECTION('',(0.,1.,0.)); +#2227 = ORIENTED_EDGE('',*,*,#2228,.F.); +#2228 = EDGE_CURVE('',#2170,#2221,#2229,.T.); +#2229 = CIRCLE('',#2230,3.E-02); +#2230 = AXIS2_PLACEMENT_3D('',#2231,#2232,#2233); +#2231 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#2232 = DIRECTION('',(-1.,0.,0.)); +#2233 = DIRECTION('',(0.,0.,1.)); +#2234 = FACE_BOUND('',#2235,.F.); +#2235 = EDGE_LOOP('',(#2236,#2237,#2238,#2239,#2240,#2241,#2242,#2243)); +#2236 = ORIENTED_EDGE('',*,*,#1980,.F.); +#2237 = ORIENTED_EDGE('',*,*,#2150,.T.); +#2238 = ORIENTED_EDGE('',*,*,#2133,.T.); +#2239 = ORIENTED_EDGE('',*,*,#2110,.T.); +#2240 = ORIENTED_EDGE('',*,*,#2085,.F.); +#2241 = ORIENTED_EDGE('',*,*,#2052,.F.); +#2242 = ORIENTED_EDGE('',*,*,#2035,.T.); +#2243 = ORIENTED_EDGE('',*,*,#2005,.F.); +#2244 = PLANE('',#2245); +#2245 = AXIS2_PLACEMENT_3D('',#2246,#2247,#2248); +#2246 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2247 = DIRECTION('',(1.,0.,0.)); +#2248 = DIRECTION('',(0.,0.,1.)); +#2249 = ADVANCED_FACE('',(#2250),#2275,.F.); +#2250 = FACE_BOUND('',#2251,.F.); +#2251 = EDGE_LOOP('',(#2252,#2262,#2268,#2269)); +#2252 = ORIENTED_EDGE('',*,*,#2253,.F.); +#2253 = EDGE_CURVE('',#2254,#2256,#2258,.T.); +#2254 = VERTEX_POINT('',#2255); +#2255 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#2256 = VERTEX_POINT('',#2257); +#2257 = CARTESIAN_POINT('',(0.8,-0.4,0.77)); +#2258 = LINE('',#2259,#2260); +#2259 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#2260 = VECTOR('',#2261,1.); +#2261 = DIRECTION('',(0.,0.,1.)); +#2262 = ORIENTED_EDGE('',*,*,#2263,.F.); +#2263 = EDGE_CURVE('',#2168,#2254,#2264,.T.); +#2264 = LINE('',#2265,#2266); +#2265 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#2266 = VECTOR('',#2267,1.); +#2267 = DIRECTION('',(1.,0.,0.)); +#2268 = ORIENTED_EDGE('',*,*,#2167,.T.); +#2269 = ORIENTED_EDGE('',*,*,#2270,.T.); +#2270 = EDGE_CURVE('',#2170,#2256,#2271,.T.); +#2271 = LINE('',#2272,#2273); +#2272 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#2273 = VECTOR('',#2274,1.); +#2274 = DIRECTION('',(1.,0.,0.)); +#2275 = PLANE('',#2276); +#2276 = AXIS2_PLACEMENT_3D('',#2277,#2278,#2279); +#2277 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2278 = DIRECTION('',(0.,1.,0.)); +#2279 = DIRECTION('',(0.,-0.,1.)); +#2280 = ADVANCED_FACE('',(#2281),#2300,.T.); +#2281 = FACE_BOUND('',#2282,.T.); +#2282 = EDGE_LOOP('',(#2283,#2284,#2292,#2299)); +#2283 = ORIENTED_EDGE('',*,*,#2177,.T.); +#2284 = ORIENTED_EDGE('',*,*,#2285,.T.); +#2285 = EDGE_CURVE('',#2178,#2286,#2288,.T.); +#2286 = VERTEX_POINT('',#2287); +#2287 = CARTESIAN_POINT('',(0.8,-0.37,0.)); +#2288 = LINE('',#2289,#2290); +#2289 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#2290 = VECTOR('',#2291,1.); +#2291 = DIRECTION('',(1.,0.,0.)); +#2292 = ORIENTED_EDGE('',*,*,#2293,.F.); +#2293 = EDGE_CURVE('',#2254,#2286,#2294,.T.); +#2294 = CIRCLE('',#2295,3.E-02); +#2295 = AXIS2_PLACEMENT_3D('',#2296,#2297,#2298); +#2296 = CARTESIAN_POINT('',(0.8,-0.37,3.E-02)); +#2297 = DIRECTION('',(1.,0.,-0.)); +#2298 = DIRECTION('',(0.,0.,1.)); +#2299 = ORIENTED_EDGE('',*,*,#2263,.F.); +#2300 = CYLINDRICAL_SURFACE('',#2301,3.E-02); +#2301 = AXIS2_PLACEMENT_3D('',#2302,#2303,#2304); +#2302 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#2303 = DIRECTION('',(1.,0.,0.)); +#2304 = DIRECTION('',(0.,-1.,0.)); +#2305 = ADVANCED_FACE('',(#2306),#2325,.T.); +#2306 = FACE_BOUND('',#2307,.T.); +#2307 = EDGE_LOOP('',(#2308,#2309,#2318,#2324)); +#2308 = ORIENTED_EDGE('',*,*,#2270,.T.); +#2309 = ORIENTED_EDGE('',*,*,#2310,.T.); +#2310 = EDGE_CURVE('',#2256,#2311,#2313,.T.); +#2311 = VERTEX_POINT('',#2312); +#2312 = CARTESIAN_POINT('',(0.8,-0.37,0.8)); +#2313 = CIRCLE('',#2314,3.E-02); +#2314 = AXIS2_PLACEMENT_3D('',#2315,#2316,#2317); +#2315 = CARTESIAN_POINT('',(0.8,-0.37,0.77)); +#2316 = DIRECTION('',(-1.,0.,0.)); +#2317 = DIRECTION('',(0.,0.,1.)); +#2318 = ORIENTED_EDGE('',*,*,#2319,.F.); +#2319 = EDGE_CURVE('',#2221,#2311,#2320,.T.); +#2320 = LINE('',#2321,#2322); +#2321 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#2322 = VECTOR('',#2323,1.); +#2323 = DIRECTION('',(1.,0.,0.)); +#2324 = ORIENTED_EDGE('',*,*,#2228,.F.); +#2325 = CYLINDRICAL_SURFACE('',#2326,3.E-02); +#2326 = AXIS2_PLACEMENT_3D('',#2327,#2328,#2329); +#2327 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#2328 = DIRECTION('',(1.,0.,0.)); +#2329 = DIRECTION('',(0.,-1.,0.)); +#2330 = ADVANCED_FACE('',(#2331),#2349,.F.); +#2331 = FACE_BOUND('',#2332,.F.); +#2332 = EDGE_LOOP('',(#2333,#2334,#2335,#2343)); +#2333 = ORIENTED_EDGE('',*,*,#2186,.F.); +#2334 = ORIENTED_EDGE('',*,*,#2285,.T.); +#2335 = ORIENTED_EDGE('',*,*,#2336,.T.); +#2336 = EDGE_CURVE('',#2286,#2337,#2339,.T.); +#2337 = VERTEX_POINT('',#2338); +#2338 = CARTESIAN_POINT('',(0.8,0.37,0.)); +#2339 = LINE('',#2340,#2341); +#2340 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#2341 = VECTOR('',#2342,1.); +#2342 = DIRECTION('',(0.,1.,0.)); +#2343 = ORIENTED_EDGE('',*,*,#2344,.F.); +#2344 = EDGE_CURVE('',#2187,#2337,#2345,.T.); +#2345 = LINE('',#2346,#2347); +#2346 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#2347 = VECTOR('',#2348,1.); +#2348 = DIRECTION('',(1.,0.,0.)); +#2349 = PLANE('',#2350); +#2350 = AXIS2_PLACEMENT_3D('',#2351,#2352,#2353); +#2351 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2352 = DIRECTION('',(0.,0.,1.)); +#2353 = DIRECTION('',(1.,0.,-0.)); +#2354 = ADVANCED_FACE('',(#2355),#2373,.T.); +#2355 = FACE_BOUND('',#2356,.T.); +#2356 = EDGE_LOOP('',(#2357,#2358,#2359,#2367)); +#2357 = ORIENTED_EDGE('',*,*,#2220,.F.); +#2358 = ORIENTED_EDGE('',*,*,#2319,.T.); +#2359 = ORIENTED_EDGE('',*,*,#2360,.T.); +#2360 = EDGE_CURVE('',#2311,#2361,#2363,.T.); +#2361 = VERTEX_POINT('',#2362); +#2362 = CARTESIAN_POINT('',(0.8,0.37,0.8)); +#2363 = LINE('',#2364,#2365); +#2364 = CARTESIAN_POINT('',(0.8,-0.4,0.8)); +#2365 = VECTOR('',#2366,1.); +#2366 = DIRECTION('',(0.,1.,0.)); +#2367 = ORIENTED_EDGE('',*,*,#2368,.F.); +#2368 = EDGE_CURVE('',#2212,#2361,#2369,.T.); +#2369 = LINE('',#2370,#2371); +#2370 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#2371 = VECTOR('',#2372,1.); +#2372 = DIRECTION('',(1.,0.,0.)); +#2373 = PLANE('',#2374); +#2374 = AXIS2_PLACEMENT_3D('',#2375,#2376,#2377); +#2375 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#2376 = DIRECTION('',(0.,0.,1.)); +#2377 = DIRECTION('',(1.,0.,-0.)); +#2378 = ADVANCED_FACE('',(#2379),#2398,.T.); +#2379 = FACE_BOUND('',#2380,.T.); +#2380 = EDGE_LOOP('',(#2381,#2389,#2396,#2397)); +#2381 = ORIENTED_EDGE('',*,*,#2382,.T.); +#2382 = EDGE_CURVE('',#2195,#2383,#2385,.T.); +#2383 = VERTEX_POINT('',#2384); +#2384 = CARTESIAN_POINT('',(0.8,0.4,3.E-02)); +#2385 = LINE('',#2386,#2387); +#2386 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#2387 = VECTOR('',#2388,1.); +#2388 = DIRECTION('',(1.,0.,0.)); +#2389 = ORIENTED_EDGE('',*,*,#2390,.T.); +#2390 = EDGE_CURVE('',#2383,#2337,#2391,.T.); +#2391 = CIRCLE('',#2392,3.E-02); +#2392 = AXIS2_PLACEMENT_3D('',#2393,#2394,#2395); +#2393 = CARTESIAN_POINT('',(0.8,0.37,3.E-02)); +#2394 = DIRECTION('',(-1.,0.,0.)); +#2395 = DIRECTION('',(0.,0.,1.)); +#2396 = ORIENTED_EDGE('',*,*,#2344,.F.); +#2397 = ORIENTED_EDGE('',*,*,#2194,.F.); +#2398 = CYLINDRICAL_SURFACE('',#2399,3.E-02); +#2399 = AXIS2_PLACEMENT_3D('',#2400,#2401,#2402); +#2400 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#2401 = DIRECTION('',(1.,0.,0.)); +#2402 = DIRECTION('',(-0.,1.,0.)); +#2403 = ADVANCED_FACE('',(#2404),#2423,.T.); +#2404 = FACE_BOUND('',#2405,.T.); +#2405 = EDGE_LOOP('',(#2406,#2407,#2408,#2417)); +#2406 = ORIENTED_EDGE('',*,*,#2211,.T.); +#2407 = ORIENTED_EDGE('',*,*,#2368,.T.); +#2408 = ORIENTED_EDGE('',*,*,#2409,.F.); +#2409 = EDGE_CURVE('',#2410,#2361,#2412,.T.); +#2410 = VERTEX_POINT('',#2411); +#2411 = CARTESIAN_POINT('',(0.8,0.4,0.77)); +#2412 = CIRCLE('',#2413,3.E-02); +#2413 = AXIS2_PLACEMENT_3D('',#2414,#2415,#2416); +#2414 = CARTESIAN_POINT('',(0.8,0.37,0.77)); +#2415 = DIRECTION('',(1.,0.,-0.)); +#2416 = DIRECTION('',(0.,0.,1.)); +#2417 = ORIENTED_EDGE('',*,*,#2418,.F.); +#2418 = EDGE_CURVE('',#2204,#2410,#2419,.T.); +#2419 = LINE('',#2420,#2421); +#2420 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#2421 = VECTOR('',#2422,1.); +#2422 = DIRECTION('',(1.,0.,0.)); +#2423 = CYLINDRICAL_SURFACE('',#2424,3.E-02); +#2424 = AXIS2_PLACEMENT_3D('',#2425,#2426,#2427); +#2425 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#2426 = DIRECTION('',(1.,0.,0.)); +#2427 = DIRECTION('',(-0.,1.,0.)); +#2428 = ADVANCED_FACE('',(#2429),#2440,.T.); +#2429 = FACE_BOUND('',#2430,.T.); +#2430 = EDGE_LOOP('',(#2431,#2437,#2438,#2439)); +#2431 = ORIENTED_EDGE('',*,*,#2432,.F.); +#2432 = EDGE_CURVE('',#2383,#2410,#2433,.T.); +#2433 = LINE('',#2434,#2435); +#2434 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#2435 = VECTOR('',#2436,1.); +#2436 = DIRECTION('',(0.,0.,1.)); +#2437 = ORIENTED_EDGE('',*,*,#2382,.F.); +#2438 = ORIENTED_EDGE('',*,*,#2203,.T.); +#2439 = ORIENTED_EDGE('',*,*,#2418,.T.); +#2440 = PLANE('',#2441); +#2441 = AXIS2_PLACEMENT_3D('',#2442,#2443,#2444); +#2442 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#2443 = DIRECTION('',(0.,1.,0.)); +#2444 = DIRECTION('',(0.,-0.,1.)); +#2445 = ADVANCED_FACE('',(#2446),#2456,.T.); +#2446 = FACE_BOUND('',#2447,.T.); +#2447 = EDGE_LOOP('',(#2448,#2449,#2450,#2451,#2452,#2453,#2454,#2455)); +#2448 = ORIENTED_EDGE('',*,*,#2253,.F.); +#2449 = ORIENTED_EDGE('',*,*,#2293,.T.); +#2450 = ORIENTED_EDGE('',*,*,#2336,.T.); +#2451 = ORIENTED_EDGE('',*,*,#2390,.F.); +#2452 = ORIENTED_EDGE('',*,*,#2432,.T.); +#2453 = ORIENTED_EDGE('',*,*,#2409,.T.); +#2454 = ORIENTED_EDGE('',*,*,#2360,.F.); +#2455 = ORIENTED_EDGE('',*,*,#2310,.F.); +#2456 = PLANE('',#2457); +#2457 = AXIS2_PLACEMENT_3D('',#2458,#2459,#2460); +#2458 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#2459 = DIRECTION('',(1.,0.,0.)); +#2460 = DIRECTION('',(0.,0.,1.)); +#2461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2465)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#2462,#2463,#2464)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#2462 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#2463 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#2464 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#2465 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#2462, + 'distance_accuracy_value','confusion accuracy'); +#2466 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2467,#2469); +#2467 = ( REPRESENTATION_RELATIONSHIP('','',#1606,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2468) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2468 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19); +#2469 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2470); +#2470 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','C10','',#5,#1601,$); +#2471 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1603)); +#2472 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2473,#2475); +#2473 = ( REPRESENTATION_RELATIONSHIP('','',#1606,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2474) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2474 = ITEM_DEFINED_TRANSFORMATION('','',#11,#23); +#2475 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2476); +#2476 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','C13','',#5,#1601,$); +#2477 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2478,#2480); +#2478 = ( REPRESENTATION_RELATIONSHIP('','',#1606,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2479) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2479 = ITEM_DEFINED_TRANSFORMATION('','',#11,#27); +#2480 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2481); +#2481 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('4','C14','',#5,#1601,$); +#2482 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2483,#2485); +#2483 = ( REPRESENTATION_RELATIONSHIP('','',#1606,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2484) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2484 = ITEM_DEFINED_TRANSFORMATION('','',#11,#31); +#2485 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2486); +#2486 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('5','C15','',#5,#1601,$); +#2487 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2488,#2490); +#2488 = ( REPRESENTATION_RELATIONSHIP('','',#224,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2489) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2489 = ITEM_DEFINED_TRANSFORMATION('','',#11,#35); +#2490 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2491); +#2491 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('6','C2','',#5,#219,$); +#2492 = SHAPE_DEFINITION_REPRESENTATION(#2493,#2499); +#2493 = PRODUCT_DEFINITION_SHAPE('','',#2494); +#2494 = PRODUCT_DEFINITION('design','',#2495,#2498); +#2495 = PRODUCT_DEFINITION_FORMATION('','',#2496); +#2496 = PRODUCT('C_1206_3216Metric','C_1206_3216Metric','',(#2497)); +#2497 = PRODUCT_CONTEXT('',#2,'mechanical'); +#2498 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#2499 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#2500),#3354); +#2500 = MANIFOLD_SOLID_BREP('',#2501); +#2501 = CLOSED_SHELL('',(#2502,#2578,#2609,#2634,#2659,#2683,#2707,#2732 + ,#2757,#2774,#2860,#2892,#2916,#2941,#2965,#2990,#3014,#3039,#3056, + #3142,#3173,#3198,#3223,#3247,#3271,#3296,#3321,#3338)); +#2502 = ADVANCED_FACE('',(#2503),#2573,.F.); +#2503 = FACE_BOUND('',#2504,.F.); +#2504 = EDGE_LOOP('',(#2505,#2515,#2524,#2532,#2541,#2549,#2558,#2566)); +#2505 = ORIENTED_EDGE('',*,*,#2506,.F.); +#2506 = EDGE_CURVE('',#2507,#2509,#2511,.T.); +#2507 = VERTEX_POINT('',#2508); +#2508 = CARTESIAN_POINT('',(-1.6,-0.8,4.E-02)); +#2509 = VERTEX_POINT('',#2510); +#2510 = CARTESIAN_POINT('',(-1.6,-0.8,1.56)); +#2511 = LINE('',#2512,#2513); +#2512 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2513 = VECTOR('',#2514,1.); +#2514 = DIRECTION('',(0.,0.,1.)); +#2515 = ORIENTED_EDGE('',*,*,#2516,.T.); +#2516 = EDGE_CURVE('',#2507,#2517,#2519,.T.); +#2517 = VERTEX_POINT('',#2518); +#2518 = CARTESIAN_POINT('',(-1.6,-0.76,0.)); +#2519 = CIRCLE('',#2520,4.E-02); +#2520 = AXIS2_PLACEMENT_3D('',#2521,#2522,#2523); +#2521 = CARTESIAN_POINT('',(-1.6,-0.76,4.E-02)); +#2522 = DIRECTION('',(1.,0.,-0.)); +#2523 = DIRECTION('',(0.,0.,1.)); +#2524 = ORIENTED_EDGE('',*,*,#2525,.T.); +#2525 = EDGE_CURVE('',#2517,#2526,#2528,.T.); +#2526 = VERTEX_POINT('',#2527); +#2527 = CARTESIAN_POINT('',(-1.6,0.76,0.)); +#2528 = LINE('',#2529,#2530); +#2529 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2530 = VECTOR('',#2531,1.); +#2531 = DIRECTION('',(0.,1.,0.)); +#2532 = ORIENTED_EDGE('',*,*,#2533,.F.); +#2533 = EDGE_CURVE('',#2534,#2526,#2536,.T.); +#2534 = VERTEX_POINT('',#2535); +#2535 = CARTESIAN_POINT('',(-1.6,0.8,4.E-02)); +#2536 = CIRCLE('',#2537,4.E-02); +#2537 = AXIS2_PLACEMENT_3D('',#2538,#2539,#2540); +#2538 = CARTESIAN_POINT('',(-1.6,0.76,4.E-02)); +#2539 = DIRECTION('',(-1.,0.,0.)); +#2540 = DIRECTION('',(0.,0.,1.)); +#2541 = ORIENTED_EDGE('',*,*,#2542,.T.); +#2542 = EDGE_CURVE('',#2534,#2543,#2545,.T.); +#2543 = VERTEX_POINT('',#2544); +#2544 = CARTESIAN_POINT('',(-1.6,0.8,1.56)); +#2545 = LINE('',#2546,#2547); +#2546 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#2547 = VECTOR('',#2548,1.); +#2548 = DIRECTION('',(0.,0.,1.)); +#2549 = ORIENTED_EDGE('',*,*,#2550,.T.); +#2550 = EDGE_CURVE('',#2543,#2551,#2553,.T.); +#2551 = VERTEX_POINT('',#2552); +#2552 = CARTESIAN_POINT('',(-1.6,0.76,1.6)); +#2553 = CIRCLE('',#2554,4.E-02); +#2554 = AXIS2_PLACEMENT_3D('',#2555,#2556,#2557); +#2555 = CARTESIAN_POINT('',(-1.6,0.76,1.56)); +#2556 = DIRECTION('',(1.,0.,-0.)); +#2557 = DIRECTION('',(0.,0.,1.)); +#2558 = ORIENTED_EDGE('',*,*,#2559,.F.); +#2559 = EDGE_CURVE('',#2560,#2551,#2562,.T.); +#2560 = VERTEX_POINT('',#2561); +#2561 = CARTESIAN_POINT('',(-1.6,-0.76,1.6)); +#2562 = LINE('',#2563,#2564); +#2563 = CARTESIAN_POINT('',(-1.6,-0.8,1.6)); +#2564 = VECTOR('',#2565,1.); +#2565 = DIRECTION('',(0.,1.,0.)); +#2566 = ORIENTED_EDGE('',*,*,#2567,.F.); +#2567 = EDGE_CURVE('',#2509,#2560,#2568,.T.); +#2568 = CIRCLE('',#2569,4.E-02); +#2569 = AXIS2_PLACEMENT_3D('',#2570,#2571,#2572); +#2570 = CARTESIAN_POINT('',(-1.6,-0.76,1.56)); +#2571 = DIRECTION('',(-1.,0.,0.)); +#2572 = DIRECTION('',(0.,0.,1.)); +#2573 = PLANE('',#2574); +#2574 = AXIS2_PLACEMENT_3D('',#2575,#2576,#2577); +#2575 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2576 = DIRECTION('',(1.,0.,0.)); +#2577 = DIRECTION('',(0.,0.,1.)); +#2578 = ADVANCED_FACE('',(#2579),#2604,.F.); +#2579 = FACE_BOUND('',#2580,.F.); +#2580 = EDGE_LOOP('',(#2581,#2591,#2597,#2598)); +#2581 = ORIENTED_EDGE('',*,*,#2582,.F.); +#2582 = EDGE_CURVE('',#2583,#2585,#2587,.T.); +#2583 = VERTEX_POINT('',#2584); +#2584 = CARTESIAN_POINT('',(-1.2,-0.8,4.E-02)); +#2585 = VERTEX_POINT('',#2586); +#2586 = CARTESIAN_POINT('',(-1.2,-0.8,1.56)); +#2587 = LINE('',#2588,#2589); +#2588 = CARTESIAN_POINT('',(-1.2,-0.8,0.)); +#2589 = VECTOR('',#2590,1.); +#2590 = DIRECTION('',(0.,0.,1.)); +#2591 = ORIENTED_EDGE('',*,*,#2592,.F.); +#2592 = EDGE_CURVE('',#2507,#2583,#2593,.T.); +#2593 = LINE('',#2594,#2595); +#2594 = CARTESIAN_POINT('',(-1.6,-0.8,4.E-02)); +#2595 = VECTOR('',#2596,1.); +#2596 = DIRECTION('',(1.,0.,0.)); +#2597 = ORIENTED_EDGE('',*,*,#2506,.T.); +#2598 = ORIENTED_EDGE('',*,*,#2599,.T.); +#2599 = EDGE_CURVE('',#2509,#2585,#2600,.T.); +#2600 = LINE('',#2601,#2602); +#2601 = CARTESIAN_POINT('',(-1.6,-0.8,1.56)); +#2602 = VECTOR('',#2603,1.); +#2603 = DIRECTION('',(1.,0.,0.)); +#2604 = PLANE('',#2605); +#2605 = AXIS2_PLACEMENT_3D('',#2606,#2607,#2608); +#2606 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2607 = DIRECTION('',(0.,1.,0.)); +#2608 = DIRECTION('',(0.,-0.,1.)); +#2609 = ADVANCED_FACE('',(#2610),#2629,.T.); +#2610 = FACE_BOUND('',#2611,.T.); +#2611 = EDGE_LOOP('',(#2612,#2613,#2621,#2628)); +#2612 = ORIENTED_EDGE('',*,*,#2516,.T.); +#2613 = ORIENTED_EDGE('',*,*,#2614,.T.); +#2614 = EDGE_CURVE('',#2517,#2615,#2617,.T.); +#2615 = VERTEX_POINT('',#2616); +#2616 = CARTESIAN_POINT('',(-1.2,-0.76,0.)); +#2617 = LINE('',#2618,#2619); +#2618 = CARTESIAN_POINT('',(-1.6,-0.76,0.)); +#2619 = VECTOR('',#2620,1.); +#2620 = DIRECTION('',(1.,0.,0.)); +#2621 = ORIENTED_EDGE('',*,*,#2622,.F.); +#2622 = EDGE_CURVE('',#2583,#2615,#2623,.T.); +#2623 = CIRCLE('',#2624,4.E-02); +#2624 = AXIS2_PLACEMENT_3D('',#2625,#2626,#2627); +#2625 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#2626 = DIRECTION('',(1.,0.,-0.)); +#2627 = DIRECTION('',(0.,0.,1.)); +#2628 = ORIENTED_EDGE('',*,*,#2592,.F.); +#2629 = CYLINDRICAL_SURFACE('',#2630,4.E-02); +#2630 = AXIS2_PLACEMENT_3D('',#2631,#2632,#2633); +#2631 = CARTESIAN_POINT('',(-1.6,-0.76,4.E-02)); +#2632 = DIRECTION('',(1.,0.,0.)); +#2633 = DIRECTION('',(0.,-1.,0.)); +#2634 = ADVANCED_FACE('',(#2635),#2654,.T.); +#2635 = FACE_BOUND('',#2636,.T.); +#2636 = EDGE_LOOP('',(#2637,#2638,#2647,#2653)); +#2637 = ORIENTED_EDGE('',*,*,#2599,.T.); +#2638 = ORIENTED_EDGE('',*,*,#2639,.T.); +#2639 = EDGE_CURVE('',#2585,#2640,#2642,.T.); +#2640 = VERTEX_POINT('',#2641); +#2641 = CARTESIAN_POINT('',(-1.2,-0.76,1.6)); +#2642 = CIRCLE('',#2643,4.E-02); +#2643 = AXIS2_PLACEMENT_3D('',#2644,#2645,#2646); +#2644 = CARTESIAN_POINT('',(-1.2,-0.76,1.56)); +#2645 = DIRECTION('',(-1.,0.,0.)); +#2646 = DIRECTION('',(0.,0.,1.)); +#2647 = ORIENTED_EDGE('',*,*,#2648,.F.); +#2648 = EDGE_CURVE('',#2560,#2640,#2649,.T.); +#2649 = LINE('',#2650,#2651); +#2650 = CARTESIAN_POINT('',(-1.6,-0.76,1.6)); +#2651 = VECTOR('',#2652,1.); +#2652 = DIRECTION('',(1.,0.,0.)); +#2653 = ORIENTED_EDGE('',*,*,#2567,.F.); +#2654 = CYLINDRICAL_SURFACE('',#2655,4.E-02); +#2655 = AXIS2_PLACEMENT_3D('',#2656,#2657,#2658); +#2656 = CARTESIAN_POINT('',(-1.6,-0.76,1.56)); +#2657 = DIRECTION('',(1.,0.,0.)); +#2658 = DIRECTION('',(0.,-1.,0.)); +#2659 = ADVANCED_FACE('',(#2660),#2678,.F.); +#2660 = FACE_BOUND('',#2661,.F.); +#2661 = EDGE_LOOP('',(#2662,#2663,#2664,#2672)); +#2662 = ORIENTED_EDGE('',*,*,#2525,.F.); +#2663 = ORIENTED_EDGE('',*,*,#2614,.T.); +#2664 = ORIENTED_EDGE('',*,*,#2665,.T.); +#2665 = EDGE_CURVE('',#2615,#2666,#2668,.T.); +#2666 = VERTEX_POINT('',#2667); +#2667 = CARTESIAN_POINT('',(-1.2,0.76,0.)); +#2668 = LINE('',#2669,#2670); +#2669 = CARTESIAN_POINT('',(-1.2,-0.8,0.)); +#2670 = VECTOR('',#2671,1.); +#2671 = DIRECTION('',(0.,1.,0.)); +#2672 = ORIENTED_EDGE('',*,*,#2673,.F.); +#2673 = EDGE_CURVE('',#2526,#2666,#2674,.T.); +#2674 = LINE('',#2675,#2676); +#2675 = CARTESIAN_POINT('',(-1.6,0.76,0.)); +#2676 = VECTOR('',#2677,1.); +#2677 = DIRECTION('',(1.,0.,0.)); +#2678 = PLANE('',#2679); +#2679 = AXIS2_PLACEMENT_3D('',#2680,#2681,#2682); +#2680 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2681 = DIRECTION('',(0.,0.,1.)); +#2682 = DIRECTION('',(1.,0.,-0.)); +#2683 = ADVANCED_FACE('',(#2684),#2702,.T.); +#2684 = FACE_BOUND('',#2685,.T.); +#2685 = EDGE_LOOP('',(#2686,#2687,#2688,#2696)); +#2686 = ORIENTED_EDGE('',*,*,#2559,.F.); +#2687 = ORIENTED_EDGE('',*,*,#2648,.T.); +#2688 = ORIENTED_EDGE('',*,*,#2689,.T.); +#2689 = EDGE_CURVE('',#2640,#2690,#2692,.T.); +#2690 = VERTEX_POINT('',#2691); +#2691 = CARTESIAN_POINT('',(-1.2,0.76,1.6)); +#2692 = LINE('',#2693,#2694); +#2693 = CARTESIAN_POINT('',(-1.2,-0.8,1.6)); +#2694 = VECTOR('',#2695,1.); +#2695 = DIRECTION('',(0.,1.,0.)); +#2696 = ORIENTED_EDGE('',*,*,#2697,.F.); +#2697 = EDGE_CURVE('',#2551,#2690,#2698,.T.); +#2698 = LINE('',#2699,#2700); +#2699 = CARTESIAN_POINT('',(-1.6,0.76,1.6)); +#2700 = VECTOR('',#2701,1.); +#2701 = DIRECTION('',(1.,0.,0.)); +#2702 = PLANE('',#2703); +#2703 = AXIS2_PLACEMENT_3D('',#2704,#2705,#2706); +#2704 = CARTESIAN_POINT('',(-1.6,-0.8,1.6)); +#2705 = DIRECTION('',(0.,0.,1.)); +#2706 = DIRECTION('',(1.,0.,-0.)); +#2707 = ADVANCED_FACE('',(#2708),#2727,.T.); +#2708 = FACE_BOUND('',#2709,.T.); +#2709 = EDGE_LOOP('',(#2710,#2718,#2725,#2726)); +#2710 = ORIENTED_EDGE('',*,*,#2711,.T.); +#2711 = EDGE_CURVE('',#2534,#2712,#2714,.T.); +#2712 = VERTEX_POINT('',#2713); +#2713 = CARTESIAN_POINT('',(-1.2,0.8,4.E-02)); +#2714 = LINE('',#2715,#2716); +#2715 = CARTESIAN_POINT('',(-1.6,0.8,4.E-02)); +#2716 = VECTOR('',#2717,1.); +#2717 = DIRECTION('',(1.,0.,0.)); +#2718 = ORIENTED_EDGE('',*,*,#2719,.T.); +#2719 = EDGE_CURVE('',#2712,#2666,#2720,.T.); +#2720 = CIRCLE('',#2721,4.E-02); +#2721 = AXIS2_PLACEMENT_3D('',#2722,#2723,#2724); +#2722 = CARTESIAN_POINT('',(-1.2,0.76,4.E-02)); +#2723 = DIRECTION('',(-1.,0.,0.)); +#2724 = DIRECTION('',(0.,0.,1.)); +#2725 = ORIENTED_EDGE('',*,*,#2673,.F.); +#2726 = ORIENTED_EDGE('',*,*,#2533,.F.); +#2727 = CYLINDRICAL_SURFACE('',#2728,4.E-02); +#2728 = AXIS2_PLACEMENT_3D('',#2729,#2730,#2731); +#2729 = CARTESIAN_POINT('',(-1.6,0.76,4.E-02)); +#2730 = DIRECTION('',(1.,0.,0.)); +#2731 = DIRECTION('',(-0.,1.,0.)); +#2732 = ADVANCED_FACE('',(#2733),#2752,.T.); +#2733 = FACE_BOUND('',#2734,.T.); +#2734 = EDGE_LOOP('',(#2735,#2736,#2737,#2746)); +#2735 = ORIENTED_EDGE('',*,*,#2550,.T.); +#2736 = ORIENTED_EDGE('',*,*,#2697,.T.); +#2737 = ORIENTED_EDGE('',*,*,#2738,.F.); +#2738 = EDGE_CURVE('',#2739,#2690,#2741,.T.); +#2739 = VERTEX_POINT('',#2740); +#2740 = CARTESIAN_POINT('',(-1.2,0.8,1.56)); +#2741 = CIRCLE('',#2742,4.E-02); +#2742 = AXIS2_PLACEMENT_3D('',#2743,#2744,#2745); +#2743 = CARTESIAN_POINT('',(-1.2,0.76,1.56)); +#2744 = DIRECTION('',(1.,0.,-0.)); +#2745 = DIRECTION('',(0.,0.,1.)); +#2746 = ORIENTED_EDGE('',*,*,#2747,.F.); +#2747 = EDGE_CURVE('',#2543,#2739,#2748,.T.); +#2748 = LINE('',#2749,#2750); +#2749 = CARTESIAN_POINT('',(-1.6,0.8,1.56)); +#2750 = VECTOR('',#2751,1.); +#2751 = DIRECTION('',(1.,0.,0.)); +#2752 = CYLINDRICAL_SURFACE('',#2753,4.E-02); +#2753 = AXIS2_PLACEMENT_3D('',#2754,#2755,#2756); +#2754 = CARTESIAN_POINT('',(-1.6,0.76,1.56)); +#2755 = DIRECTION('',(1.,0.,0.)); +#2756 = DIRECTION('',(-0.,1.,0.)); +#2757 = ADVANCED_FACE('',(#2758),#2769,.T.); +#2758 = FACE_BOUND('',#2759,.T.); +#2759 = EDGE_LOOP('',(#2760,#2766,#2767,#2768)); +#2760 = ORIENTED_EDGE('',*,*,#2761,.F.); +#2761 = EDGE_CURVE('',#2712,#2739,#2762,.T.); +#2762 = LINE('',#2763,#2764); +#2763 = CARTESIAN_POINT('',(-1.2,0.8,0.)); +#2764 = VECTOR('',#2765,1.); +#2765 = DIRECTION('',(0.,0.,1.)); +#2766 = ORIENTED_EDGE('',*,*,#2711,.F.); +#2767 = ORIENTED_EDGE('',*,*,#2542,.T.); +#2768 = ORIENTED_EDGE('',*,*,#2747,.T.); +#2769 = PLANE('',#2770); +#2770 = AXIS2_PLACEMENT_3D('',#2771,#2772,#2773); +#2771 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#2772 = DIRECTION('',(0.,1.,0.)); +#2773 = DIRECTION('',(0.,-0.,1.)); +#2774 = ADVANCED_FACE('',(#2775,#2785),#2855,.T.); +#2775 = FACE_BOUND('',#2776,.T.); +#2776 = EDGE_LOOP('',(#2777,#2778,#2779,#2780,#2781,#2782,#2783,#2784)); +#2777 = ORIENTED_EDGE('',*,*,#2582,.F.); +#2778 = ORIENTED_EDGE('',*,*,#2622,.T.); +#2779 = ORIENTED_EDGE('',*,*,#2665,.T.); +#2780 = ORIENTED_EDGE('',*,*,#2719,.F.); +#2781 = ORIENTED_EDGE('',*,*,#2761,.T.); +#2782 = ORIENTED_EDGE('',*,*,#2738,.T.); +#2783 = ORIENTED_EDGE('',*,*,#2689,.F.); +#2784 = ORIENTED_EDGE('',*,*,#2639,.F.); +#2785 = FACE_BOUND('',#2786,.T.); +#2786 = EDGE_LOOP('',(#2787,#2798,#2806,#2815,#2823,#2832,#2840,#2849)); +#2787 = ORIENTED_EDGE('',*,*,#2788,.F.); +#2788 = EDGE_CURVE('',#2789,#2791,#2793,.T.); +#2789 = VERTEX_POINT('',#2790); +#2790 = CARTESIAN_POINT('',(-1.2,-0.76,8.E-02)); +#2791 = VERTEX_POINT('',#2792); +#2792 = CARTESIAN_POINT('',(-1.2,-0.72,4.E-02)); +#2793 = CIRCLE('',#2794,4.E-02); +#2794 = AXIS2_PLACEMENT_3D('',#2795,#2796,#2797); +#2795 = CARTESIAN_POINT('',(-1.2,-0.72,8.E-02)); +#2796 = DIRECTION('',(1.,0.,-0.)); +#2797 = DIRECTION('',(0.,0.,1.)); +#2798 = ORIENTED_EDGE('',*,*,#2799,.T.); +#2799 = EDGE_CURVE('',#2789,#2800,#2802,.T.); +#2800 = VERTEX_POINT('',#2801); +#2801 = CARTESIAN_POINT('',(-1.2,-0.76,1.52)); +#2802 = LINE('',#2803,#2804); +#2803 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#2804 = VECTOR('',#2805,1.); +#2805 = DIRECTION('',(0.,0.,1.)); +#2806 = ORIENTED_EDGE('',*,*,#2807,.T.); +#2807 = EDGE_CURVE('',#2800,#2808,#2810,.T.); +#2808 = VERTEX_POINT('',#2809); +#2809 = CARTESIAN_POINT('',(-1.2,-0.72,1.56)); +#2810 = CIRCLE('',#2811,4.E-02); +#2811 = AXIS2_PLACEMENT_3D('',#2812,#2813,#2814); +#2812 = CARTESIAN_POINT('',(-1.2,-0.72,1.52)); +#2813 = DIRECTION('',(-1.,0.,0.)); +#2814 = DIRECTION('',(0.,0.,1.)); +#2815 = ORIENTED_EDGE('',*,*,#2816,.T.); +#2816 = EDGE_CURVE('',#2808,#2817,#2819,.T.); +#2817 = VERTEX_POINT('',#2818); +#2818 = CARTESIAN_POINT('',(-1.2,0.72,1.56)); +#2819 = LINE('',#2820,#2821); +#2820 = CARTESIAN_POINT('',(-1.2,-0.76,1.56)); +#2821 = VECTOR('',#2822,1.); +#2822 = DIRECTION('',(0.,1.,0.)); +#2823 = ORIENTED_EDGE('',*,*,#2824,.F.); +#2824 = EDGE_CURVE('',#2825,#2817,#2827,.T.); +#2825 = VERTEX_POINT('',#2826); +#2826 = CARTESIAN_POINT('',(-1.2,0.76,1.52)); +#2827 = CIRCLE('',#2828,4.E-02); +#2828 = AXIS2_PLACEMENT_3D('',#2829,#2830,#2831); +#2829 = CARTESIAN_POINT('',(-1.2,0.72,1.52)); +#2830 = DIRECTION('',(1.,0.,-0.)); +#2831 = DIRECTION('',(0.,0.,1.)); +#2832 = ORIENTED_EDGE('',*,*,#2833,.F.); +#2833 = EDGE_CURVE('',#2834,#2825,#2836,.T.); +#2834 = VERTEX_POINT('',#2835); +#2835 = CARTESIAN_POINT('',(-1.2,0.76,8.E-02)); +#2836 = LINE('',#2837,#2838); +#2837 = CARTESIAN_POINT('',(-1.2,0.76,4.E-02)); +#2838 = VECTOR('',#2839,1.); +#2839 = DIRECTION('',(0.,0.,1.)); +#2840 = ORIENTED_EDGE('',*,*,#2841,.T.); +#2841 = EDGE_CURVE('',#2834,#2842,#2844,.T.); +#2842 = VERTEX_POINT('',#2843); +#2843 = CARTESIAN_POINT('',(-1.2,0.72,4.E-02)); +#2844 = CIRCLE('',#2845,4.E-02); +#2845 = AXIS2_PLACEMENT_3D('',#2846,#2847,#2848); +#2846 = CARTESIAN_POINT('',(-1.2,0.72,8.E-02)); +#2847 = DIRECTION('',(-1.,0.,0.)); +#2848 = DIRECTION('',(0.,0.,1.)); +#2849 = ORIENTED_EDGE('',*,*,#2850,.F.); +#2850 = EDGE_CURVE('',#2791,#2842,#2851,.T.); +#2851 = LINE('',#2852,#2853); +#2852 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#2853 = VECTOR('',#2854,1.); +#2854 = DIRECTION('',(0.,1.,0.)); +#2855 = PLANE('',#2856); +#2856 = AXIS2_PLACEMENT_3D('',#2857,#2858,#2859); +#2857 = CARTESIAN_POINT('',(-1.2,-0.8,0.)); +#2858 = DIRECTION('',(1.,0.,0.)); +#2859 = DIRECTION('',(0.,0.,1.)); +#2860 = ADVANCED_FACE('',(#2861),#2887,.T.); +#2861 = FACE_BOUND('',#2862,.T.); +#2862 = EDGE_LOOP('',(#2863,#2864,#2872,#2881)); +#2863 = ORIENTED_EDGE('',*,*,#2788,.T.); +#2864 = ORIENTED_EDGE('',*,*,#2865,.T.); +#2865 = EDGE_CURVE('',#2791,#2866,#2868,.T.); +#2866 = VERTEX_POINT('',#2867); +#2867 = CARTESIAN_POINT('',(1.2,-0.72,4.E-02)); +#2868 = LINE('',#2869,#2870); +#2869 = CARTESIAN_POINT('',(-1.2,-0.72,4.E-02)); +#2870 = VECTOR('',#2871,1.); +#2871 = DIRECTION('',(1.,0.,0.)); +#2872 = ORIENTED_EDGE('',*,*,#2873,.F.); +#2873 = EDGE_CURVE('',#2874,#2866,#2876,.T.); +#2874 = VERTEX_POINT('',#2875); +#2875 = CARTESIAN_POINT('',(1.2,-0.76,8.E-02)); +#2876 = CIRCLE('',#2877,4.E-02); +#2877 = AXIS2_PLACEMENT_3D('',#2878,#2879,#2880); +#2878 = CARTESIAN_POINT('',(1.2,-0.72,8.E-02)); +#2879 = DIRECTION('',(1.,0.,-0.)); +#2880 = DIRECTION('',(0.,0.,1.)); +#2881 = ORIENTED_EDGE('',*,*,#2882,.F.); +#2882 = EDGE_CURVE('',#2789,#2874,#2883,.T.); +#2883 = LINE('',#2884,#2885); +#2884 = CARTESIAN_POINT('',(-1.2,-0.76,8.E-02)); +#2885 = VECTOR('',#2886,1.); +#2886 = DIRECTION('',(1.,0.,0.)); +#2887 = CYLINDRICAL_SURFACE('',#2888,4.E-02); +#2888 = AXIS2_PLACEMENT_3D('',#2889,#2890,#2891); +#2889 = CARTESIAN_POINT('',(-1.2,-0.72,8.E-02)); +#2890 = DIRECTION('',(1.,0.,0.)); +#2891 = DIRECTION('',(0.,-1.,0.)); +#2892 = ADVANCED_FACE('',(#2893),#2911,.F.); +#2893 = FACE_BOUND('',#2894,.F.); +#2894 = EDGE_LOOP('',(#2895,#2896,#2897,#2905)); +#2895 = ORIENTED_EDGE('',*,*,#2850,.F.); +#2896 = ORIENTED_EDGE('',*,*,#2865,.T.); +#2897 = ORIENTED_EDGE('',*,*,#2898,.T.); +#2898 = EDGE_CURVE('',#2866,#2899,#2901,.T.); +#2899 = VERTEX_POINT('',#2900); +#2900 = CARTESIAN_POINT('',(1.2,0.72,4.E-02)); +#2901 = LINE('',#2902,#2903); +#2902 = CARTESIAN_POINT('',(1.2,-0.76,4.E-02)); +#2903 = VECTOR('',#2904,1.); +#2904 = DIRECTION('',(0.,1.,0.)); +#2905 = ORIENTED_EDGE('',*,*,#2906,.F.); +#2906 = EDGE_CURVE('',#2842,#2899,#2907,.T.); +#2907 = LINE('',#2908,#2909); +#2908 = CARTESIAN_POINT('',(-1.2,0.72,4.E-02)); +#2909 = VECTOR('',#2910,1.); +#2910 = DIRECTION('',(1.,0.,0.)); +#2911 = PLANE('',#2912); +#2912 = AXIS2_PLACEMENT_3D('',#2913,#2914,#2915); +#2913 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#2914 = DIRECTION('',(0.,0.,1.)); +#2915 = DIRECTION('',(1.,0.,-0.)); +#2916 = ADVANCED_FACE('',(#2917),#2936,.T.); +#2917 = FACE_BOUND('',#2918,.T.); +#2918 = EDGE_LOOP('',(#2919,#2927,#2934,#2935)); +#2919 = ORIENTED_EDGE('',*,*,#2920,.T.); +#2920 = EDGE_CURVE('',#2834,#2921,#2923,.T.); +#2921 = VERTEX_POINT('',#2922); +#2922 = CARTESIAN_POINT('',(1.2,0.76,8.E-02)); +#2923 = LINE('',#2924,#2925); +#2924 = CARTESIAN_POINT('',(-1.2,0.76,8.E-02)); +#2925 = VECTOR('',#2926,1.); +#2926 = DIRECTION('',(1.,0.,0.)); +#2927 = ORIENTED_EDGE('',*,*,#2928,.T.); +#2928 = EDGE_CURVE('',#2921,#2899,#2929,.T.); +#2929 = CIRCLE('',#2930,4.E-02); +#2930 = AXIS2_PLACEMENT_3D('',#2931,#2932,#2933); +#2931 = CARTESIAN_POINT('',(1.2,0.72,8.E-02)); +#2932 = DIRECTION('',(-1.,0.,0.)); +#2933 = DIRECTION('',(0.,0.,1.)); +#2934 = ORIENTED_EDGE('',*,*,#2906,.F.); +#2935 = ORIENTED_EDGE('',*,*,#2841,.F.); +#2936 = CYLINDRICAL_SURFACE('',#2937,4.E-02); +#2937 = AXIS2_PLACEMENT_3D('',#2938,#2939,#2940); +#2938 = CARTESIAN_POINT('',(-1.2,0.72,8.E-02)); +#2939 = DIRECTION('',(1.,0.,0.)); +#2940 = DIRECTION('',(-0.,1.,0.)); +#2941 = ADVANCED_FACE('',(#2942),#2960,.T.); +#2942 = FACE_BOUND('',#2943,.T.); +#2943 = EDGE_LOOP('',(#2944,#2952,#2953,#2954)); +#2944 = ORIENTED_EDGE('',*,*,#2945,.F.); +#2945 = EDGE_CURVE('',#2921,#2946,#2948,.T.); +#2946 = VERTEX_POINT('',#2947); +#2947 = CARTESIAN_POINT('',(1.2,0.76,1.52)); +#2948 = LINE('',#2949,#2950); +#2949 = CARTESIAN_POINT('',(1.2,0.76,4.E-02)); +#2950 = VECTOR('',#2951,1.); +#2951 = DIRECTION('',(0.,0.,1.)); +#2952 = ORIENTED_EDGE('',*,*,#2920,.F.); +#2953 = ORIENTED_EDGE('',*,*,#2833,.T.); +#2954 = ORIENTED_EDGE('',*,*,#2955,.T.); +#2955 = EDGE_CURVE('',#2825,#2946,#2956,.T.); +#2956 = LINE('',#2957,#2958); +#2957 = CARTESIAN_POINT('',(-1.2,0.76,1.52)); +#2958 = VECTOR('',#2959,1.); +#2959 = DIRECTION('',(1.,0.,0.)); +#2960 = PLANE('',#2961); +#2961 = AXIS2_PLACEMENT_3D('',#2962,#2963,#2964); +#2962 = CARTESIAN_POINT('',(-1.2,0.76,4.E-02)); +#2963 = DIRECTION('',(0.,1.,0.)); +#2964 = DIRECTION('',(0.,-0.,1.)); +#2965 = ADVANCED_FACE('',(#2966),#2985,.T.); +#2966 = FACE_BOUND('',#2967,.T.); +#2967 = EDGE_LOOP('',(#2968,#2969,#2977,#2984)); +#2968 = ORIENTED_EDGE('',*,*,#2824,.T.); +#2969 = ORIENTED_EDGE('',*,*,#2970,.T.); +#2970 = EDGE_CURVE('',#2817,#2971,#2973,.T.); +#2971 = VERTEX_POINT('',#2972); +#2972 = CARTESIAN_POINT('',(1.2,0.72,1.56)); +#2973 = LINE('',#2974,#2975); +#2974 = CARTESIAN_POINT('',(-1.2,0.72,1.56)); +#2975 = VECTOR('',#2976,1.); +#2976 = DIRECTION('',(1.,0.,0.)); +#2977 = ORIENTED_EDGE('',*,*,#2978,.F.); +#2978 = EDGE_CURVE('',#2946,#2971,#2979,.T.); +#2979 = CIRCLE('',#2980,4.E-02); +#2980 = AXIS2_PLACEMENT_3D('',#2981,#2982,#2983); +#2981 = CARTESIAN_POINT('',(1.2,0.72,1.52)); +#2982 = DIRECTION('',(1.,0.,-0.)); +#2983 = DIRECTION('',(0.,0.,1.)); +#2984 = ORIENTED_EDGE('',*,*,#2955,.F.); +#2985 = CYLINDRICAL_SURFACE('',#2986,4.E-02); +#2986 = AXIS2_PLACEMENT_3D('',#2987,#2988,#2989); +#2987 = CARTESIAN_POINT('',(-1.2,0.72,1.52)); +#2988 = DIRECTION('',(1.,0.,0.)); +#2989 = DIRECTION('',(-0.,1.,0.)); +#2990 = ADVANCED_FACE('',(#2991),#3009,.T.); +#2991 = FACE_BOUND('',#2992,.T.); +#2992 = EDGE_LOOP('',(#2993,#2994,#3002,#3008)); +#2993 = ORIENTED_EDGE('',*,*,#2816,.F.); +#2994 = ORIENTED_EDGE('',*,*,#2995,.T.); +#2995 = EDGE_CURVE('',#2808,#2996,#2998,.T.); +#2996 = VERTEX_POINT('',#2997); +#2997 = CARTESIAN_POINT('',(1.2,-0.72,1.56)); +#2998 = LINE('',#2999,#3000); +#2999 = CARTESIAN_POINT('',(-1.2,-0.72,1.56)); +#3000 = VECTOR('',#3001,1.); +#3001 = DIRECTION('',(1.,0.,0.)); +#3002 = ORIENTED_EDGE('',*,*,#3003,.T.); +#3003 = EDGE_CURVE('',#2996,#2971,#3004,.T.); +#3004 = LINE('',#3005,#3006); +#3005 = CARTESIAN_POINT('',(1.2,-0.76,1.56)); +#3006 = VECTOR('',#3007,1.); +#3007 = DIRECTION('',(0.,1.,0.)); +#3008 = ORIENTED_EDGE('',*,*,#2970,.F.); +#3009 = PLANE('',#3010); +#3010 = AXIS2_PLACEMENT_3D('',#3011,#3012,#3013); +#3011 = CARTESIAN_POINT('',(-1.2,-0.76,1.56)); +#3012 = DIRECTION('',(0.,0.,1.)); +#3013 = DIRECTION('',(1.,0.,-0.)); +#3014 = ADVANCED_FACE('',(#3015),#3034,.T.); +#3015 = FACE_BOUND('',#3016,.T.); +#3016 = EDGE_LOOP('',(#3017,#3025,#3032,#3033)); +#3017 = ORIENTED_EDGE('',*,*,#3018,.T.); +#3018 = EDGE_CURVE('',#2800,#3019,#3021,.T.); +#3019 = VERTEX_POINT('',#3020); +#3020 = CARTESIAN_POINT('',(1.2,-0.76,1.52)); +#3021 = LINE('',#3022,#3023); +#3022 = CARTESIAN_POINT('',(-1.2,-0.76,1.52)); +#3023 = VECTOR('',#3024,1.); +#3024 = DIRECTION('',(1.,0.,0.)); +#3025 = ORIENTED_EDGE('',*,*,#3026,.T.); +#3026 = EDGE_CURVE('',#3019,#2996,#3027,.T.); +#3027 = CIRCLE('',#3028,4.E-02); +#3028 = AXIS2_PLACEMENT_3D('',#3029,#3030,#3031); +#3029 = CARTESIAN_POINT('',(1.2,-0.72,1.52)); +#3030 = DIRECTION('',(-1.,0.,0.)); +#3031 = DIRECTION('',(0.,0.,1.)); +#3032 = ORIENTED_EDGE('',*,*,#2995,.F.); +#3033 = ORIENTED_EDGE('',*,*,#2807,.F.); +#3034 = CYLINDRICAL_SURFACE('',#3035,4.E-02); +#3035 = AXIS2_PLACEMENT_3D('',#3036,#3037,#3038); +#3036 = CARTESIAN_POINT('',(-1.2,-0.72,1.52)); +#3037 = DIRECTION('',(1.,0.,0.)); +#3038 = DIRECTION('',(0.,-1.,0.)); +#3039 = ADVANCED_FACE('',(#3040),#3051,.F.); +#3040 = FACE_BOUND('',#3041,.F.); +#3041 = EDGE_LOOP('',(#3042,#3048,#3049,#3050)); +#3042 = ORIENTED_EDGE('',*,*,#3043,.F.); +#3043 = EDGE_CURVE('',#2874,#3019,#3044,.T.); +#3044 = LINE('',#3045,#3046); +#3045 = CARTESIAN_POINT('',(1.2,-0.76,4.E-02)); +#3046 = VECTOR('',#3047,1.); +#3047 = DIRECTION('',(0.,0.,1.)); +#3048 = ORIENTED_EDGE('',*,*,#2882,.F.); +#3049 = ORIENTED_EDGE('',*,*,#2799,.T.); +#3050 = ORIENTED_EDGE('',*,*,#3018,.T.); +#3051 = PLANE('',#3052); +#3052 = AXIS2_PLACEMENT_3D('',#3053,#3054,#3055); +#3053 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#3054 = DIRECTION('',(0.,1.,0.)); +#3055 = DIRECTION('',(0.,-0.,1.)); +#3056 = ADVANCED_FACE('',(#3057,#3127),#3137,.F.); +#3057 = FACE_BOUND('',#3058,.F.); +#3058 = EDGE_LOOP('',(#3059,#3069,#3078,#3086,#3095,#3103,#3112,#3120)); +#3059 = ORIENTED_EDGE('',*,*,#3060,.F.); +#3060 = EDGE_CURVE('',#3061,#3063,#3065,.T.); +#3061 = VERTEX_POINT('',#3062); +#3062 = CARTESIAN_POINT('',(1.2,-0.8,4.E-02)); +#3063 = VERTEX_POINT('',#3064); +#3064 = CARTESIAN_POINT('',(1.2,-0.8,1.56)); +#3065 = LINE('',#3066,#3067); +#3066 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3067 = VECTOR('',#3068,1.); +#3068 = DIRECTION('',(0.,0.,1.)); +#3069 = ORIENTED_EDGE('',*,*,#3070,.T.); +#3070 = EDGE_CURVE('',#3061,#3071,#3073,.T.); +#3071 = VERTEX_POINT('',#3072); +#3072 = CARTESIAN_POINT('',(1.2,-0.76,0.)); +#3073 = CIRCLE('',#3074,4.E-02); +#3074 = AXIS2_PLACEMENT_3D('',#3075,#3076,#3077); +#3075 = CARTESIAN_POINT('',(1.2,-0.76,4.E-02)); +#3076 = DIRECTION('',(1.,0.,-0.)); +#3077 = DIRECTION('',(0.,0.,1.)); +#3078 = ORIENTED_EDGE('',*,*,#3079,.T.); +#3079 = EDGE_CURVE('',#3071,#3080,#3082,.T.); +#3080 = VERTEX_POINT('',#3081); +#3081 = CARTESIAN_POINT('',(1.2,0.76,0.)); +#3082 = LINE('',#3083,#3084); +#3083 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3084 = VECTOR('',#3085,1.); +#3085 = DIRECTION('',(0.,1.,0.)); +#3086 = ORIENTED_EDGE('',*,*,#3087,.F.); +#3087 = EDGE_CURVE('',#3088,#3080,#3090,.T.); +#3088 = VERTEX_POINT('',#3089); +#3089 = CARTESIAN_POINT('',(1.2,0.8,4.E-02)); +#3090 = CIRCLE('',#3091,4.E-02); +#3091 = AXIS2_PLACEMENT_3D('',#3092,#3093,#3094); +#3092 = CARTESIAN_POINT('',(1.2,0.76,4.E-02)); +#3093 = DIRECTION('',(-1.,0.,0.)); +#3094 = DIRECTION('',(0.,0.,1.)); +#3095 = ORIENTED_EDGE('',*,*,#3096,.T.); +#3096 = EDGE_CURVE('',#3088,#3097,#3099,.T.); +#3097 = VERTEX_POINT('',#3098); +#3098 = CARTESIAN_POINT('',(1.2,0.8,1.56)); +#3099 = LINE('',#3100,#3101); +#3100 = CARTESIAN_POINT('',(1.2,0.8,0.)); +#3101 = VECTOR('',#3102,1.); +#3102 = DIRECTION('',(0.,0.,1.)); +#3103 = ORIENTED_EDGE('',*,*,#3104,.T.); +#3104 = EDGE_CURVE('',#3097,#3105,#3107,.T.); +#3105 = VERTEX_POINT('',#3106); +#3106 = CARTESIAN_POINT('',(1.2,0.76,1.6)); +#3107 = CIRCLE('',#3108,4.E-02); +#3108 = AXIS2_PLACEMENT_3D('',#3109,#3110,#3111); +#3109 = CARTESIAN_POINT('',(1.2,0.76,1.56)); +#3110 = DIRECTION('',(1.,0.,-0.)); +#3111 = DIRECTION('',(0.,0.,1.)); +#3112 = ORIENTED_EDGE('',*,*,#3113,.F.); +#3113 = EDGE_CURVE('',#3114,#3105,#3116,.T.); +#3114 = VERTEX_POINT('',#3115); +#3115 = CARTESIAN_POINT('',(1.2,-0.76,1.6)); +#3116 = LINE('',#3117,#3118); +#3117 = CARTESIAN_POINT('',(1.2,-0.8,1.6)); +#3118 = VECTOR('',#3119,1.); +#3119 = DIRECTION('',(0.,1.,0.)); +#3120 = ORIENTED_EDGE('',*,*,#3121,.F.); +#3121 = EDGE_CURVE('',#3063,#3114,#3122,.T.); +#3122 = CIRCLE('',#3123,4.E-02); +#3123 = AXIS2_PLACEMENT_3D('',#3124,#3125,#3126); +#3124 = CARTESIAN_POINT('',(1.2,-0.76,1.56)); +#3125 = DIRECTION('',(-1.,0.,0.)); +#3126 = DIRECTION('',(0.,0.,1.)); +#3127 = FACE_BOUND('',#3128,.F.); +#3128 = EDGE_LOOP('',(#3129,#3130,#3131,#3132,#3133,#3134,#3135,#3136)); +#3129 = ORIENTED_EDGE('',*,*,#2873,.F.); +#3130 = ORIENTED_EDGE('',*,*,#3043,.T.); +#3131 = ORIENTED_EDGE('',*,*,#3026,.T.); +#3132 = ORIENTED_EDGE('',*,*,#3003,.T.); +#3133 = ORIENTED_EDGE('',*,*,#2978,.F.); +#3134 = ORIENTED_EDGE('',*,*,#2945,.F.); +#3135 = ORIENTED_EDGE('',*,*,#2928,.T.); +#3136 = ORIENTED_EDGE('',*,*,#2898,.F.); +#3137 = PLANE('',#3138); +#3138 = AXIS2_PLACEMENT_3D('',#3139,#3140,#3141); +#3139 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3140 = DIRECTION('',(1.,0.,0.)); +#3141 = DIRECTION('',(0.,0.,1.)); +#3142 = ADVANCED_FACE('',(#3143),#3168,.F.); +#3143 = FACE_BOUND('',#3144,.F.); +#3144 = EDGE_LOOP('',(#3145,#3155,#3161,#3162)); +#3145 = ORIENTED_EDGE('',*,*,#3146,.F.); +#3146 = EDGE_CURVE('',#3147,#3149,#3151,.T.); +#3147 = VERTEX_POINT('',#3148); +#3148 = CARTESIAN_POINT('',(1.6,-0.8,4.E-02)); +#3149 = VERTEX_POINT('',#3150); +#3150 = CARTESIAN_POINT('',(1.6,-0.8,1.56)); +#3151 = LINE('',#3152,#3153); +#3152 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#3153 = VECTOR('',#3154,1.); +#3154 = DIRECTION('',(0.,0.,1.)); +#3155 = ORIENTED_EDGE('',*,*,#3156,.F.); +#3156 = EDGE_CURVE('',#3061,#3147,#3157,.T.); +#3157 = LINE('',#3158,#3159); +#3158 = CARTESIAN_POINT('',(1.2,-0.8,4.E-02)); +#3159 = VECTOR('',#3160,1.); +#3160 = DIRECTION('',(1.,0.,0.)); +#3161 = ORIENTED_EDGE('',*,*,#3060,.T.); +#3162 = ORIENTED_EDGE('',*,*,#3163,.T.); +#3163 = EDGE_CURVE('',#3063,#3149,#3164,.T.); +#3164 = LINE('',#3165,#3166); +#3165 = CARTESIAN_POINT('',(1.2,-0.8,1.56)); +#3166 = VECTOR('',#3167,1.); +#3167 = DIRECTION('',(1.,0.,0.)); +#3168 = PLANE('',#3169); +#3169 = AXIS2_PLACEMENT_3D('',#3170,#3171,#3172); +#3170 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3171 = DIRECTION('',(0.,1.,0.)); +#3172 = DIRECTION('',(0.,-0.,1.)); +#3173 = ADVANCED_FACE('',(#3174),#3193,.T.); +#3174 = FACE_BOUND('',#3175,.T.); +#3175 = EDGE_LOOP('',(#3176,#3177,#3185,#3192)); +#3176 = ORIENTED_EDGE('',*,*,#3070,.T.); +#3177 = ORIENTED_EDGE('',*,*,#3178,.T.); +#3178 = EDGE_CURVE('',#3071,#3179,#3181,.T.); +#3179 = VERTEX_POINT('',#3180); +#3180 = CARTESIAN_POINT('',(1.6,-0.76,0.)); +#3181 = LINE('',#3182,#3183); +#3182 = CARTESIAN_POINT('',(1.2,-0.76,0.)); +#3183 = VECTOR('',#3184,1.); +#3184 = DIRECTION('',(1.,0.,0.)); +#3185 = ORIENTED_EDGE('',*,*,#3186,.F.); +#3186 = EDGE_CURVE('',#3147,#3179,#3187,.T.); +#3187 = CIRCLE('',#3188,4.E-02); +#3188 = AXIS2_PLACEMENT_3D('',#3189,#3190,#3191); +#3189 = CARTESIAN_POINT('',(1.6,-0.76,4.E-02)); +#3190 = DIRECTION('',(1.,0.,-0.)); +#3191 = DIRECTION('',(0.,0.,1.)); +#3192 = ORIENTED_EDGE('',*,*,#3156,.F.); +#3193 = CYLINDRICAL_SURFACE('',#3194,4.E-02); +#3194 = AXIS2_PLACEMENT_3D('',#3195,#3196,#3197); +#3195 = CARTESIAN_POINT('',(1.2,-0.76,4.E-02)); +#3196 = DIRECTION('',(1.,0.,0.)); +#3197 = DIRECTION('',(0.,-1.,0.)); +#3198 = ADVANCED_FACE('',(#3199),#3218,.T.); +#3199 = FACE_BOUND('',#3200,.T.); +#3200 = EDGE_LOOP('',(#3201,#3202,#3211,#3217)); +#3201 = ORIENTED_EDGE('',*,*,#3163,.T.); +#3202 = ORIENTED_EDGE('',*,*,#3203,.T.); +#3203 = EDGE_CURVE('',#3149,#3204,#3206,.T.); +#3204 = VERTEX_POINT('',#3205); +#3205 = CARTESIAN_POINT('',(1.6,-0.76,1.6)); +#3206 = CIRCLE('',#3207,4.E-02); +#3207 = AXIS2_PLACEMENT_3D('',#3208,#3209,#3210); +#3208 = CARTESIAN_POINT('',(1.6,-0.76,1.56)); +#3209 = DIRECTION('',(-1.,0.,0.)); +#3210 = DIRECTION('',(0.,0.,1.)); +#3211 = ORIENTED_EDGE('',*,*,#3212,.F.); +#3212 = EDGE_CURVE('',#3114,#3204,#3213,.T.); +#3213 = LINE('',#3214,#3215); +#3214 = CARTESIAN_POINT('',(1.2,-0.76,1.6)); +#3215 = VECTOR('',#3216,1.); +#3216 = DIRECTION('',(1.,0.,0.)); +#3217 = ORIENTED_EDGE('',*,*,#3121,.F.); +#3218 = CYLINDRICAL_SURFACE('',#3219,4.E-02); +#3219 = AXIS2_PLACEMENT_3D('',#3220,#3221,#3222); +#3220 = CARTESIAN_POINT('',(1.2,-0.76,1.56)); +#3221 = DIRECTION('',(1.,0.,0.)); +#3222 = DIRECTION('',(0.,-1.,0.)); +#3223 = ADVANCED_FACE('',(#3224),#3242,.F.); +#3224 = FACE_BOUND('',#3225,.F.); +#3225 = EDGE_LOOP('',(#3226,#3227,#3228,#3236)); +#3226 = ORIENTED_EDGE('',*,*,#3079,.F.); +#3227 = ORIENTED_EDGE('',*,*,#3178,.T.); +#3228 = ORIENTED_EDGE('',*,*,#3229,.T.); +#3229 = EDGE_CURVE('',#3179,#3230,#3232,.T.); +#3230 = VERTEX_POINT('',#3231); +#3231 = CARTESIAN_POINT('',(1.6,0.76,0.)); +#3232 = LINE('',#3233,#3234); +#3233 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#3234 = VECTOR('',#3235,1.); +#3235 = DIRECTION('',(0.,1.,0.)); +#3236 = ORIENTED_EDGE('',*,*,#3237,.F.); +#3237 = EDGE_CURVE('',#3080,#3230,#3238,.T.); +#3238 = LINE('',#3239,#3240); +#3239 = CARTESIAN_POINT('',(1.2,0.76,0.)); +#3240 = VECTOR('',#3241,1.); +#3241 = DIRECTION('',(1.,0.,0.)); +#3242 = PLANE('',#3243); +#3243 = AXIS2_PLACEMENT_3D('',#3244,#3245,#3246); +#3244 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3245 = DIRECTION('',(0.,0.,1.)); +#3246 = DIRECTION('',(1.,0.,-0.)); +#3247 = ADVANCED_FACE('',(#3248),#3266,.T.); +#3248 = FACE_BOUND('',#3249,.T.); +#3249 = EDGE_LOOP('',(#3250,#3251,#3252,#3260)); +#3250 = ORIENTED_EDGE('',*,*,#3113,.F.); +#3251 = ORIENTED_EDGE('',*,*,#3212,.T.); +#3252 = ORIENTED_EDGE('',*,*,#3253,.T.); +#3253 = EDGE_CURVE('',#3204,#3254,#3256,.T.); +#3254 = VERTEX_POINT('',#3255); +#3255 = CARTESIAN_POINT('',(1.6,0.76,1.6)); +#3256 = LINE('',#3257,#3258); +#3257 = CARTESIAN_POINT('',(1.6,-0.8,1.6)); +#3258 = VECTOR('',#3259,1.); +#3259 = DIRECTION('',(0.,1.,0.)); +#3260 = ORIENTED_EDGE('',*,*,#3261,.F.); +#3261 = EDGE_CURVE('',#3105,#3254,#3262,.T.); +#3262 = LINE('',#3263,#3264); +#3263 = CARTESIAN_POINT('',(1.2,0.76,1.6)); +#3264 = VECTOR('',#3265,1.); +#3265 = DIRECTION('',(1.,0.,0.)); +#3266 = PLANE('',#3267); +#3267 = AXIS2_PLACEMENT_3D('',#3268,#3269,#3270); +#3268 = CARTESIAN_POINT('',(1.2,-0.8,1.6)); +#3269 = DIRECTION('',(0.,0.,1.)); +#3270 = DIRECTION('',(1.,0.,-0.)); +#3271 = ADVANCED_FACE('',(#3272),#3291,.T.); +#3272 = FACE_BOUND('',#3273,.T.); +#3273 = EDGE_LOOP('',(#3274,#3282,#3289,#3290)); +#3274 = ORIENTED_EDGE('',*,*,#3275,.T.); +#3275 = EDGE_CURVE('',#3088,#3276,#3278,.T.); +#3276 = VERTEX_POINT('',#3277); +#3277 = CARTESIAN_POINT('',(1.6,0.8,4.E-02)); +#3278 = LINE('',#3279,#3280); +#3279 = CARTESIAN_POINT('',(1.2,0.8,4.E-02)); +#3280 = VECTOR('',#3281,1.); +#3281 = DIRECTION('',(1.,0.,0.)); +#3282 = ORIENTED_EDGE('',*,*,#3283,.T.); +#3283 = EDGE_CURVE('',#3276,#3230,#3284,.T.); +#3284 = CIRCLE('',#3285,4.E-02); +#3285 = AXIS2_PLACEMENT_3D('',#3286,#3287,#3288); +#3286 = CARTESIAN_POINT('',(1.6,0.76,4.E-02)); +#3287 = DIRECTION('',(-1.,0.,0.)); +#3288 = DIRECTION('',(0.,0.,1.)); +#3289 = ORIENTED_EDGE('',*,*,#3237,.F.); +#3290 = ORIENTED_EDGE('',*,*,#3087,.F.); +#3291 = CYLINDRICAL_SURFACE('',#3292,4.E-02); +#3292 = AXIS2_PLACEMENT_3D('',#3293,#3294,#3295); +#3293 = CARTESIAN_POINT('',(1.2,0.76,4.E-02)); +#3294 = DIRECTION('',(1.,0.,0.)); +#3295 = DIRECTION('',(-0.,1.,0.)); +#3296 = ADVANCED_FACE('',(#3297),#3316,.T.); +#3297 = FACE_BOUND('',#3298,.T.); +#3298 = EDGE_LOOP('',(#3299,#3300,#3301,#3310)); +#3299 = ORIENTED_EDGE('',*,*,#3104,.T.); +#3300 = ORIENTED_EDGE('',*,*,#3261,.T.); +#3301 = ORIENTED_EDGE('',*,*,#3302,.F.); +#3302 = EDGE_CURVE('',#3303,#3254,#3305,.T.); +#3303 = VERTEX_POINT('',#3304); +#3304 = CARTESIAN_POINT('',(1.6,0.8,1.56)); +#3305 = CIRCLE('',#3306,4.E-02); +#3306 = AXIS2_PLACEMENT_3D('',#3307,#3308,#3309); +#3307 = CARTESIAN_POINT('',(1.6,0.76,1.56)); +#3308 = DIRECTION('',(1.,0.,-0.)); +#3309 = DIRECTION('',(0.,0.,1.)); +#3310 = ORIENTED_EDGE('',*,*,#3311,.F.); +#3311 = EDGE_CURVE('',#3097,#3303,#3312,.T.); +#3312 = LINE('',#3313,#3314); +#3313 = CARTESIAN_POINT('',(1.2,0.8,1.56)); +#3314 = VECTOR('',#3315,1.); +#3315 = DIRECTION('',(1.,0.,0.)); +#3316 = CYLINDRICAL_SURFACE('',#3317,4.E-02); +#3317 = AXIS2_PLACEMENT_3D('',#3318,#3319,#3320); +#3318 = CARTESIAN_POINT('',(1.2,0.76,1.56)); +#3319 = DIRECTION('',(1.,0.,0.)); +#3320 = DIRECTION('',(-0.,1.,0.)); +#3321 = ADVANCED_FACE('',(#3322),#3333,.T.); +#3322 = FACE_BOUND('',#3323,.T.); +#3323 = EDGE_LOOP('',(#3324,#3330,#3331,#3332)); +#3324 = ORIENTED_EDGE('',*,*,#3325,.F.); +#3325 = EDGE_CURVE('',#3276,#3303,#3326,.T.); +#3326 = LINE('',#3327,#3328); +#3327 = CARTESIAN_POINT('',(1.6,0.8,0.)); +#3328 = VECTOR('',#3329,1.); +#3329 = DIRECTION('',(0.,0.,1.)); +#3330 = ORIENTED_EDGE('',*,*,#3275,.F.); +#3331 = ORIENTED_EDGE('',*,*,#3096,.T.); +#3332 = ORIENTED_EDGE('',*,*,#3311,.T.); +#3333 = PLANE('',#3334); +#3334 = AXIS2_PLACEMENT_3D('',#3335,#3336,#3337); +#3335 = CARTESIAN_POINT('',(1.2,0.8,0.)); +#3336 = DIRECTION('',(0.,1.,0.)); +#3337 = DIRECTION('',(0.,-0.,1.)); +#3338 = ADVANCED_FACE('',(#3339),#3349,.T.); +#3339 = FACE_BOUND('',#3340,.T.); +#3340 = EDGE_LOOP('',(#3341,#3342,#3343,#3344,#3345,#3346,#3347,#3348)); +#3341 = ORIENTED_EDGE('',*,*,#3146,.F.); +#3342 = ORIENTED_EDGE('',*,*,#3186,.T.); +#3343 = ORIENTED_EDGE('',*,*,#3229,.T.); +#3344 = ORIENTED_EDGE('',*,*,#3283,.F.); +#3345 = ORIENTED_EDGE('',*,*,#3325,.T.); +#3346 = ORIENTED_EDGE('',*,*,#3302,.T.); +#3347 = ORIENTED_EDGE('',*,*,#3253,.F.); +#3348 = ORIENTED_EDGE('',*,*,#3203,.F.); +#3349 = PLANE('',#3350); +#3350 = AXIS2_PLACEMENT_3D('',#3351,#3352,#3353); +#3351 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#3352 = DIRECTION('',(1.,0.,0.)); +#3353 = DIRECTION('',(0.,0.,1.)); +#3354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3358)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#3355,#3356,#3357)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#3355 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#3356 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#3357 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#3358 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#3355, + 'distance_accuracy_value','confusion accuracy'); +#3359 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3360,#3362); +#3360 = ( REPRESENTATION_RELATIONSHIP('','',#2499,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3361) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#3361 = ITEM_DEFINED_TRANSFORMATION('','',#11,#39); +#3362 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #3363); +#3363 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7','C3','',#5,#2494,$); +#3364 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#2496)); +#3365 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3366,#3368); +#3366 = ( REPRESENTATION_RELATIONSHIP('','',#2499,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3367) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#3367 = ITEM_DEFINED_TRANSFORMATION('','',#11,#43); +#3368 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #3369); +#3369 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('8','C4','',#5,#2494,$); +#3370 = SHAPE_DEFINITION_REPRESENTATION(#3371,#3377); +#3371 = PRODUCT_DEFINITION_SHAPE('','',#3372); +#3372 = PRODUCT_DEFINITION('design','',#3373,#3376); +#3373 = PRODUCT_DEFINITION_FORMATION('','',#3374); +#3374 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#3375)); +#3375 = PRODUCT_CONTEXT('',#2,'mechanical'); +#3376 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#3377 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#3378),#4232); +#3378 = MANIFOLD_SOLID_BREP('',#3379); +#3379 = CLOSED_SHELL('',(#3380,#3456,#3487,#3512,#3537,#3561,#3585,#3610 + ,#3635,#3652,#3738,#3770,#3794,#3819,#3843,#3868,#3892,#3917,#3934, + #4020,#4051,#4076,#4101,#4125,#4149,#4174,#4199,#4216)); +#3380 = ADVANCED_FACE('',(#3381),#3451,.F.); +#3381 = FACE_BOUND('',#3382,.F.); +#3382 = EDGE_LOOP('',(#3383,#3393,#3402,#3410,#3419,#3427,#3436,#3444)); +#3383 = ORIENTED_EDGE('',*,*,#3384,.F.); +#3384 = EDGE_CURVE('',#3385,#3387,#3389,.T.); +#3385 = VERTEX_POINT('',#3386); +#3386 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#3387 = VERTEX_POINT('',#3388); +#3388 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#3389 = LINE('',#3390,#3391); +#3390 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3391 = VECTOR('',#3392,1.); +#3392 = DIRECTION('',(0.,0.,1.)); +#3393 = ORIENTED_EDGE('',*,*,#3394,.T.); +#3394 = EDGE_CURVE('',#3385,#3395,#3397,.T.); +#3395 = VERTEX_POINT('',#3396); +#3396 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#3397 = CIRCLE('',#3398,4.E-02); +#3398 = AXIS2_PLACEMENT_3D('',#3399,#3400,#3401); +#3399 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#3400 = DIRECTION('',(1.,0.,-0.)); +#3401 = DIRECTION('',(0.,0.,1.)); +#3402 = ORIENTED_EDGE('',*,*,#3403,.T.); +#3403 = EDGE_CURVE('',#3395,#3404,#3406,.T.); +#3404 = VERTEX_POINT('',#3405); +#3405 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#3406 = LINE('',#3407,#3408); +#3407 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3408 = VECTOR('',#3409,1.); +#3409 = DIRECTION('',(0.,1.,0.)); +#3410 = ORIENTED_EDGE('',*,*,#3411,.F.); +#3411 = EDGE_CURVE('',#3412,#3404,#3414,.T.); +#3412 = VERTEX_POINT('',#3413); +#3413 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#3414 = CIRCLE('',#3415,4.E-02); +#3415 = AXIS2_PLACEMENT_3D('',#3416,#3417,#3418); +#3416 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#3417 = DIRECTION('',(-1.,0.,0.)); +#3418 = DIRECTION('',(0.,0.,1.)); +#3419 = ORIENTED_EDGE('',*,*,#3420,.T.); +#3420 = EDGE_CURVE('',#3412,#3421,#3423,.T.); +#3421 = VERTEX_POINT('',#3422); +#3422 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#3423 = LINE('',#3424,#3425); +#3424 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#3425 = VECTOR('',#3426,1.); +#3426 = DIRECTION('',(0.,0.,1.)); +#3427 = ORIENTED_EDGE('',*,*,#3428,.T.); +#3428 = EDGE_CURVE('',#3421,#3429,#3431,.T.); +#3429 = VERTEX_POINT('',#3430); +#3430 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#3431 = CIRCLE('',#3432,4.E-02); +#3432 = AXIS2_PLACEMENT_3D('',#3433,#3434,#3435); +#3433 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#3434 = DIRECTION('',(1.,0.,-0.)); +#3435 = DIRECTION('',(0.,0.,1.)); +#3436 = ORIENTED_EDGE('',*,*,#3437,.F.); +#3437 = EDGE_CURVE('',#3438,#3429,#3440,.T.); +#3438 = VERTEX_POINT('',#3439); +#3439 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#3440 = LINE('',#3441,#3442); +#3441 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#3442 = VECTOR('',#3443,1.); +#3443 = DIRECTION('',(0.,1.,0.)); +#3444 = ORIENTED_EDGE('',*,*,#3445,.F.); +#3445 = EDGE_CURVE('',#3387,#3438,#3446,.T.); +#3446 = CIRCLE('',#3447,4.E-02); +#3447 = AXIS2_PLACEMENT_3D('',#3448,#3449,#3450); +#3448 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#3449 = DIRECTION('',(-1.,0.,0.)); +#3450 = DIRECTION('',(0.,0.,1.)); +#3451 = PLANE('',#3452); +#3452 = AXIS2_PLACEMENT_3D('',#3453,#3454,#3455); +#3453 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3454 = DIRECTION('',(1.,0.,0.)); +#3455 = DIRECTION('',(0.,0.,1.)); +#3456 = ADVANCED_FACE('',(#3457),#3482,.F.); +#3457 = FACE_BOUND('',#3458,.F.); +#3458 = EDGE_LOOP('',(#3459,#3469,#3475,#3476)); +#3459 = ORIENTED_EDGE('',*,*,#3460,.F.); +#3460 = EDGE_CURVE('',#3461,#3463,#3465,.T.); +#3461 = VERTEX_POINT('',#3462); +#3462 = CARTESIAN_POINT('',(-0.6,-0.625,4.E-02)); +#3463 = VERTEX_POINT('',#3464); +#3464 = CARTESIAN_POINT('',(-0.6,-0.625,1.21)); +#3465 = LINE('',#3466,#3467); +#3466 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#3467 = VECTOR('',#3468,1.); +#3468 = DIRECTION('',(0.,0.,1.)); +#3469 = ORIENTED_EDGE('',*,*,#3470,.F.); +#3470 = EDGE_CURVE('',#3385,#3461,#3471,.T.); +#3471 = LINE('',#3472,#3473); +#3472 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#3473 = VECTOR('',#3474,1.); +#3474 = DIRECTION('',(1.,0.,0.)); +#3475 = ORIENTED_EDGE('',*,*,#3384,.T.); +#3476 = ORIENTED_EDGE('',*,*,#3477,.T.); +#3477 = EDGE_CURVE('',#3387,#3463,#3478,.T.); +#3478 = LINE('',#3479,#3480); +#3479 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#3480 = VECTOR('',#3481,1.); +#3481 = DIRECTION('',(1.,0.,0.)); +#3482 = PLANE('',#3483); +#3483 = AXIS2_PLACEMENT_3D('',#3484,#3485,#3486); +#3484 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3485 = DIRECTION('',(0.,1.,0.)); +#3486 = DIRECTION('',(0.,-0.,1.)); +#3487 = ADVANCED_FACE('',(#3488),#3507,.T.); +#3488 = FACE_BOUND('',#3489,.T.); +#3489 = EDGE_LOOP('',(#3490,#3491,#3499,#3506)); +#3490 = ORIENTED_EDGE('',*,*,#3394,.T.); +#3491 = ORIENTED_EDGE('',*,*,#3492,.T.); +#3492 = EDGE_CURVE('',#3395,#3493,#3495,.T.); +#3493 = VERTEX_POINT('',#3494); +#3494 = CARTESIAN_POINT('',(-0.6,-0.585,0.)); +#3495 = LINE('',#3496,#3497); +#3496 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#3497 = VECTOR('',#3498,1.); +#3498 = DIRECTION('',(1.,0.,0.)); +#3499 = ORIENTED_EDGE('',*,*,#3500,.F.); +#3500 = EDGE_CURVE('',#3461,#3493,#3501,.T.); +#3501 = CIRCLE('',#3502,4.E-02); +#3502 = AXIS2_PLACEMENT_3D('',#3503,#3504,#3505); +#3503 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3504 = DIRECTION('',(1.,0.,-0.)); +#3505 = DIRECTION('',(0.,0.,1.)); +#3506 = ORIENTED_EDGE('',*,*,#3470,.F.); +#3507 = CYLINDRICAL_SURFACE('',#3508,4.E-02); +#3508 = AXIS2_PLACEMENT_3D('',#3509,#3510,#3511); +#3509 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#3510 = DIRECTION('',(1.,0.,0.)); +#3511 = DIRECTION('',(0.,-1.,0.)); +#3512 = ADVANCED_FACE('',(#3513),#3532,.T.); +#3513 = FACE_BOUND('',#3514,.T.); +#3514 = EDGE_LOOP('',(#3515,#3516,#3525,#3531)); +#3515 = ORIENTED_EDGE('',*,*,#3477,.T.); +#3516 = ORIENTED_EDGE('',*,*,#3517,.T.); +#3517 = EDGE_CURVE('',#3463,#3518,#3520,.T.); +#3518 = VERTEX_POINT('',#3519); +#3519 = CARTESIAN_POINT('',(-0.6,-0.585,1.25)); +#3520 = CIRCLE('',#3521,4.E-02); +#3521 = AXIS2_PLACEMENT_3D('',#3522,#3523,#3524); +#3522 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#3523 = DIRECTION('',(-1.,0.,0.)); +#3524 = DIRECTION('',(0.,0.,1.)); +#3525 = ORIENTED_EDGE('',*,*,#3526,.F.); +#3526 = EDGE_CURVE('',#3438,#3518,#3527,.T.); +#3527 = LINE('',#3528,#3529); +#3528 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#3529 = VECTOR('',#3530,1.); +#3530 = DIRECTION('',(1.,0.,0.)); +#3531 = ORIENTED_EDGE('',*,*,#3445,.F.); +#3532 = CYLINDRICAL_SURFACE('',#3533,4.E-02); +#3533 = AXIS2_PLACEMENT_3D('',#3534,#3535,#3536); +#3534 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#3535 = DIRECTION('',(1.,0.,0.)); +#3536 = DIRECTION('',(0.,-1.,0.)); +#3537 = ADVANCED_FACE('',(#3538),#3556,.F.); +#3538 = FACE_BOUND('',#3539,.F.); +#3539 = EDGE_LOOP('',(#3540,#3541,#3542,#3550)); +#3540 = ORIENTED_EDGE('',*,*,#3403,.F.); +#3541 = ORIENTED_EDGE('',*,*,#3492,.T.); +#3542 = ORIENTED_EDGE('',*,*,#3543,.T.); +#3543 = EDGE_CURVE('',#3493,#3544,#3546,.T.); +#3544 = VERTEX_POINT('',#3545); +#3545 = CARTESIAN_POINT('',(-0.6,0.585,0.)); +#3546 = LINE('',#3547,#3548); +#3547 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#3548 = VECTOR('',#3549,1.); +#3549 = DIRECTION('',(0.,1.,0.)); +#3550 = ORIENTED_EDGE('',*,*,#3551,.F.); +#3551 = EDGE_CURVE('',#3404,#3544,#3552,.T.); +#3552 = LINE('',#3553,#3554); +#3553 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#3554 = VECTOR('',#3555,1.); +#3555 = DIRECTION('',(1.,0.,0.)); +#3556 = PLANE('',#3557); +#3557 = AXIS2_PLACEMENT_3D('',#3558,#3559,#3560); +#3558 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3559 = DIRECTION('',(0.,0.,1.)); +#3560 = DIRECTION('',(1.,0.,-0.)); +#3561 = ADVANCED_FACE('',(#3562),#3580,.T.); +#3562 = FACE_BOUND('',#3563,.T.); +#3563 = EDGE_LOOP('',(#3564,#3565,#3566,#3574)); +#3564 = ORIENTED_EDGE('',*,*,#3437,.F.); +#3565 = ORIENTED_EDGE('',*,*,#3526,.T.); +#3566 = ORIENTED_EDGE('',*,*,#3567,.T.); +#3567 = EDGE_CURVE('',#3518,#3568,#3570,.T.); +#3568 = VERTEX_POINT('',#3569); +#3569 = CARTESIAN_POINT('',(-0.6,0.585,1.25)); +#3570 = LINE('',#3571,#3572); +#3571 = CARTESIAN_POINT('',(-0.6,-0.625,1.25)); +#3572 = VECTOR('',#3573,1.); +#3573 = DIRECTION('',(0.,1.,0.)); +#3574 = ORIENTED_EDGE('',*,*,#3575,.F.); +#3575 = EDGE_CURVE('',#3429,#3568,#3576,.T.); +#3576 = LINE('',#3577,#3578); +#3577 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#3578 = VECTOR('',#3579,1.); +#3579 = DIRECTION('',(1.,0.,0.)); +#3580 = PLANE('',#3581); +#3581 = AXIS2_PLACEMENT_3D('',#3582,#3583,#3584); +#3582 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#3583 = DIRECTION('',(0.,0.,1.)); +#3584 = DIRECTION('',(1.,0.,-0.)); +#3585 = ADVANCED_FACE('',(#3586),#3605,.T.); +#3586 = FACE_BOUND('',#3587,.T.); +#3587 = EDGE_LOOP('',(#3588,#3596,#3603,#3604)); +#3588 = ORIENTED_EDGE('',*,*,#3589,.T.); +#3589 = EDGE_CURVE('',#3412,#3590,#3592,.T.); +#3590 = VERTEX_POINT('',#3591); +#3591 = CARTESIAN_POINT('',(-0.6,0.625,4.E-02)); +#3592 = LINE('',#3593,#3594); +#3593 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#3594 = VECTOR('',#3595,1.); +#3595 = DIRECTION('',(1.,0.,0.)); +#3596 = ORIENTED_EDGE('',*,*,#3597,.T.); +#3597 = EDGE_CURVE('',#3590,#3544,#3598,.T.); +#3598 = CIRCLE('',#3599,4.E-02); +#3599 = AXIS2_PLACEMENT_3D('',#3600,#3601,#3602); +#3600 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#3601 = DIRECTION('',(-1.,0.,0.)); +#3602 = DIRECTION('',(0.,0.,1.)); +#3603 = ORIENTED_EDGE('',*,*,#3551,.F.); +#3604 = ORIENTED_EDGE('',*,*,#3411,.F.); +#3605 = CYLINDRICAL_SURFACE('',#3606,4.E-02); +#3606 = AXIS2_PLACEMENT_3D('',#3607,#3608,#3609); +#3607 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#3608 = DIRECTION('',(1.,0.,0.)); +#3609 = DIRECTION('',(-0.,1.,0.)); +#3610 = ADVANCED_FACE('',(#3611),#3630,.T.); +#3611 = FACE_BOUND('',#3612,.T.); +#3612 = EDGE_LOOP('',(#3613,#3614,#3615,#3624)); +#3613 = ORIENTED_EDGE('',*,*,#3428,.T.); +#3614 = ORIENTED_EDGE('',*,*,#3575,.T.); +#3615 = ORIENTED_EDGE('',*,*,#3616,.F.); +#3616 = EDGE_CURVE('',#3617,#3568,#3619,.T.); +#3617 = VERTEX_POINT('',#3618); +#3618 = CARTESIAN_POINT('',(-0.6,0.625,1.21)); +#3619 = CIRCLE('',#3620,4.E-02); +#3620 = AXIS2_PLACEMENT_3D('',#3621,#3622,#3623); +#3621 = CARTESIAN_POINT('',(-0.6,0.585,1.21)); +#3622 = DIRECTION('',(1.,0.,-0.)); +#3623 = DIRECTION('',(0.,0.,1.)); +#3624 = ORIENTED_EDGE('',*,*,#3625,.F.); +#3625 = EDGE_CURVE('',#3421,#3617,#3626,.T.); +#3626 = LINE('',#3627,#3628); +#3627 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#3628 = VECTOR('',#3629,1.); +#3629 = DIRECTION('',(1.,0.,0.)); +#3630 = CYLINDRICAL_SURFACE('',#3631,4.E-02); +#3631 = AXIS2_PLACEMENT_3D('',#3632,#3633,#3634); +#3632 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#3633 = DIRECTION('',(1.,0.,0.)); +#3634 = DIRECTION('',(-0.,1.,0.)); +#3635 = ADVANCED_FACE('',(#3636),#3647,.T.); +#3636 = FACE_BOUND('',#3637,.T.); +#3637 = EDGE_LOOP('',(#3638,#3644,#3645,#3646)); +#3638 = ORIENTED_EDGE('',*,*,#3639,.F.); +#3639 = EDGE_CURVE('',#3590,#3617,#3640,.T.); +#3640 = LINE('',#3641,#3642); +#3641 = CARTESIAN_POINT('',(-0.6,0.625,0.)); +#3642 = VECTOR('',#3643,1.); +#3643 = DIRECTION('',(0.,0.,1.)); +#3644 = ORIENTED_EDGE('',*,*,#3589,.F.); +#3645 = ORIENTED_EDGE('',*,*,#3420,.T.); +#3646 = ORIENTED_EDGE('',*,*,#3625,.T.); +#3647 = PLANE('',#3648); +#3648 = AXIS2_PLACEMENT_3D('',#3649,#3650,#3651); +#3649 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#3650 = DIRECTION('',(0.,1.,0.)); +#3651 = DIRECTION('',(0.,-0.,1.)); +#3652 = ADVANCED_FACE('',(#3653,#3663),#3733,.T.); +#3653 = FACE_BOUND('',#3654,.T.); +#3654 = EDGE_LOOP('',(#3655,#3656,#3657,#3658,#3659,#3660,#3661,#3662)); +#3655 = ORIENTED_EDGE('',*,*,#3460,.F.); +#3656 = ORIENTED_EDGE('',*,*,#3500,.T.); +#3657 = ORIENTED_EDGE('',*,*,#3543,.T.); +#3658 = ORIENTED_EDGE('',*,*,#3597,.F.); +#3659 = ORIENTED_EDGE('',*,*,#3639,.T.); +#3660 = ORIENTED_EDGE('',*,*,#3616,.T.); +#3661 = ORIENTED_EDGE('',*,*,#3567,.F.); +#3662 = ORIENTED_EDGE('',*,*,#3517,.F.); +#3663 = FACE_BOUND('',#3664,.T.); +#3664 = EDGE_LOOP('',(#3665,#3676,#3684,#3693,#3701,#3710,#3718,#3727)); +#3665 = ORIENTED_EDGE('',*,*,#3666,.F.); +#3666 = EDGE_CURVE('',#3667,#3669,#3671,.T.); +#3667 = VERTEX_POINT('',#3668); +#3668 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#3669 = VERTEX_POINT('',#3670); +#3670 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#3671 = CIRCLE('',#3672,4.E-02); +#3672 = AXIS2_PLACEMENT_3D('',#3673,#3674,#3675); +#3673 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#3674 = DIRECTION('',(1.,0.,-0.)); +#3675 = DIRECTION('',(0.,0.,1.)); +#3676 = ORIENTED_EDGE('',*,*,#3677,.T.); +#3677 = EDGE_CURVE('',#3667,#3678,#3680,.T.); +#3678 = VERTEX_POINT('',#3679); +#3679 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#3680 = LINE('',#3681,#3682); +#3681 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3682 = VECTOR('',#3683,1.); +#3683 = DIRECTION('',(0.,0.,1.)); +#3684 = ORIENTED_EDGE('',*,*,#3685,.T.); +#3685 = EDGE_CURVE('',#3678,#3686,#3688,.T.); +#3686 = VERTEX_POINT('',#3687); +#3687 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#3688 = CIRCLE('',#3689,4.E-02); +#3689 = AXIS2_PLACEMENT_3D('',#3690,#3691,#3692); +#3690 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#3691 = DIRECTION('',(-1.,0.,0.)); +#3692 = DIRECTION('',(0.,0.,1.)); +#3693 = ORIENTED_EDGE('',*,*,#3694,.T.); +#3694 = EDGE_CURVE('',#3686,#3695,#3697,.T.); +#3695 = VERTEX_POINT('',#3696); +#3696 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#3697 = LINE('',#3698,#3699); +#3698 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#3699 = VECTOR('',#3700,1.); +#3700 = DIRECTION('',(0.,1.,0.)); +#3701 = ORIENTED_EDGE('',*,*,#3702,.F.); +#3702 = EDGE_CURVE('',#3703,#3695,#3705,.T.); +#3703 = VERTEX_POINT('',#3704); +#3704 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#3705 = CIRCLE('',#3706,4.E-02); +#3706 = AXIS2_PLACEMENT_3D('',#3707,#3708,#3709); +#3707 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#3708 = DIRECTION('',(1.,0.,-0.)); +#3709 = DIRECTION('',(0.,0.,1.)); +#3710 = ORIENTED_EDGE('',*,*,#3711,.F.); +#3711 = EDGE_CURVE('',#3712,#3703,#3714,.T.); +#3712 = VERTEX_POINT('',#3713); +#3713 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#3714 = LINE('',#3715,#3716); +#3715 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#3716 = VECTOR('',#3717,1.); +#3717 = DIRECTION('',(0.,0.,1.)); +#3718 = ORIENTED_EDGE('',*,*,#3719,.T.); +#3719 = EDGE_CURVE('',#3712,#3720,#3722,.T.); +#3720 = VERTEX_POINT('',#3721); +#3721 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#3722 = CIRCLE('',#3723,4.E-02); +#3723 = AXIS2_PLACEMENT_3D('',#3724,#3725,#3726); +#3724 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#3725 = DIRECTION('',(-1.,0.,0.)); +#3726 = DIRECTION('',(0.,0.,1.)); +#3727 = ORIENTED_EDGE('',*,*,#3728,.F.); +#3728 = EDGE_CURVE('',#3669,#3720,#3729,.T.); +#3729 = LINE('',#3730,#3731); +#3730 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3731 = VECTOR('',#3732,1.); +#3732 = DIRECTION('',(0.,1.,0.)); +#3733 = PLANE('',#3734); +#3734 = AXIS2_PLACEMENT_3D('',#3735,#3736,#3737); +#3735 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#3736 = DIRECTION('',(1.,0.,0.)); +#3737 = DIRECTION('',(0.,0.,1.)); +#3738 = ADVANCED_FACE('',(#3739),#3765,.T.); +#3739 = FACE_BOUND('',#3740,.T.); +#3740 = EDGE_LOOP('',(#3741,#3742,#3750,#3759)); +#3741 = ORIENTED_EDGE('',*,*,#3666,.T.); +#3742 = ORIENTED_EDGE('',*,*,#3743,.T.); +#3743 = EDGE_CURVE('',#3669,#3744,#3746,.T.); +#3744 = VERTEX_POINT('',#3745); +#3745 = CARTESIAN_POINT('',(0.6,-0.545,4.E-02)); +#3746 = LINE('',#3747,#3748); +#3747 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#3748 = VECTOR('',#3749,1.); +#3749 = DIRECTION('',(1.,0.,0.)); +#3750 = ORIENTED_EDGE('',*,*,#3751,.F.); +#3751 = EDGE_CURVE('',#3752,#3744,#3754,.T.); +#3752 = VERTEX_POINT('',#3753); +#3753 = CARTESIAN_POINT('',(0.6,-0.585,8.E-02)); +#3754 = CIRCLE('',#3755,4.E-02); +#3755 = AXIS2_PLACEMENT_3D('',#3756,#3757,#3758); +#3756 = CARTESIAN_POINT('',(0.6,-0.545,8.E-02)); +#3757 = DIRECTION('',(1.,0.,-0.)); +#3758 = DIRECTION('',(0.,0.,1.)); +#3759 = ORIENTED_EDGE('',*,*,#3760,.F.); +#3760 = EDGE_CURVE('',#3667,#3752,#3761,.T.); +#3761 = LINE('',#3762,#3763); +#3762 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#3763 = VECTOR('',#3764,1.); +#3764 = DIRECTION('',(1.,0.,0.)); +#3765 = CYLINDRICAL_SURFACE('',#3766,4.E-02); +#3766 = AXIS2_PLACEMENT_3D('',#3767,#3768,#3769); +#3767 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#3768 = DIRECTION('',(1.,0.,0.)); +#3769 = DIRECTION('',(0.,-1.,0.)); +#3770 = ADVANCED_FACE('',(#3771),#3789,.F.); +#3771 = FACE_BOUND('',#3772,.F.); +#3772 = EDGE_LOOP('',(#3773,#3774,#3775,#3783)); +#3773 = ORIENTED_EDGE('',*,*,#3728,.F.); +#3774 = ORIENTED_EDGE('',*,*,#3743,.T.); +#3775 = ORIENTED_EDGE('',*,*,#3776,.T.); +#3776 = EDGE_CURVE('',#3744,#3777,#3779,.T.); +#3777 = VERTEX_POINT('',#3778); +#3778 = CARTESIAN_POINT('',(0.6,0.545,4.E-02)); +#3779 = LINE('',#3780,#3781); +#3780 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#3781 = VECTOR('',#3782,1.); +#3782 = DIRECTION('',(0.,1.,0.)); +#3783 = ORIENTED_EDGE('',*,*,#3784,.F.); +#3784 = EDGE_CURVE('',#3720,#3777,#3785,.T.); +#3785 = LINE('',#3786,#3787); +#3786 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#3787 = VECTOR('',#3788,1.); +#3788 = DIRECTION('',(1.,0.,0.)); +#3789 = PLANE('',#3790); +#3790 = AXIS2_PLACEMENT_3D('',#3791,#3792,#3793); +#3791 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3792 = DIRECTION('',(0.,0.,1.)); +#3793 = DIRECTION('',(1.,0.,-0.)); +#3794 = ADVANCED_FACE('',(#3795),#3814,.T.); +#3795 = FACE_BOUND('',#3796,.T.); +#3796 = EDGE_LOOP('',(#3797,#3805,#3812,#3813)); +#3797 = ORIENTED_EDGE('',*,*,#3798,.T.); +#3798 = EDGE_CURVE('',#3712,#3799,#3801,.T.); +#3799 = VERTEX_POINT('',#3800); +#3800 = CARTESIAN_POINT('',(0.6,0.585,8.E-02)); +#3801 = LINE('',#3802,#3803); +#3802 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#3803 = VECTOR('',#3804,1.); +#3804 = DIRECTION('',(1.,0.,0.)); +#3805 = ORIENTED_EDGE('',*,*,#3806,.T.); +#3806 = EDGE_CURVE('',#3799,#3777,#3807,.T.); +#3807 = CIRCLE('',#3808,4.E-02); +#3808 = AXIS2_PLACEMENT_3D('',#3809,#3810,#3811); +#3809 = CARTESIAN_POINT('',(0.6,0.545,8.E-02)); +#3810 = DIRECTION('',(-1.,0.,0.)); +#3811 = DIRECTION('',(0.,0.,1.)); +#3812 = ORIENTED_EDGE('',*,*,#3784,.F.); +#3813 = ORIENTED_EDGE('',*,*,#3719,.F.); +#3814 = CYLINDRICAL_SURFACE('',#3815,4.E-02); +#3815 = AXIS2_PLACEMENT_3D('',#3816,#3817,#3818); +#3816 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#3817 = DIRECTION('',(1.,0.,0.)); +#3818 = DIRECTION('',(-0.,1.,0.)); +#3819 = ADVANCED_FACE('',(#3820),#3838,.T.); +#3820 = FACE_BOUND('',#3821,.T.); +#3821 = EDGE_LOOP('',(#3822,#3830,#3831,#3832)); +#3822 = ORIENTED_EDGE('',*,*,#3823,.F.); +#3823 = EDGE_CURVE('',#3799,#3824,#3826,.T.); +#3824 = VERTEX_POINT('',#3825); +#3825 = CARTESIAN_POINT('',(0.6,0.585,1.17)); +#3826 = LINE('',#3827,#3828); +#3827 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#3828 = VECTOR('',#3829,1.); +#3829 = DIRECTION('',(0.,0.,1.)); +#3830 = ORIENTED_EDGE('',*,*,#3798,.F.); +#3831 = ORIENTED_EDGE('',*,*,#3711,.T.); +#3832 = ORIENTED_EDGE('',*,*,#3833,.T.); +#3833 = EDGE_CURVE('',#3703,#3824,#3834,.T.); +#3834 = LINE('',#3835,#3836); +#3835 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#3836 = VECTOR('',#3837,1.); +#3837 = DIRECTION('',(1.,0.,0.)); +#3838 = PLANE('',#3839); +#3839 = AXIS2_PLACEMENT_3D('',#3840,#3841,#3842); +#3840 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#3841 = DIRECTION('',(0.,1.,0.)); +#3842 = DIRECTION('',(0.,-0.,1.)); +#3843 = ADVANCED_FACE('',(#3844),#3863,.T.); +#3844 = FACE_BOUND('',#3845,.T.); +#3845 = EDGE_LOOP('',(#3846,#3847,#3855,#3862)); +#3846 = ORIENTED_EDGE('',*,*,#3702,.T.); +#3847 = ORIENTED_EDGE('',*,*,#3848,.T.); +#3848 = EDGE_CURVE('',#3695,#3849,#3851,.T.); +#3849 = VERTEX_POINT('',#3850); +#3850 = CARTESIAN_POINT('',(0.6,0.545,1.21)); +#3851 = LINE('',#3852,#3853); +#3852 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#3853 = VECTOR('',#3854,1.); +#3854 = DIRECTION('',(1.,0.,0.)); +#3855 = ORIENTED_EDGE('',*,*,#3856,.F.); +#3856 = EDGE_CURVE('',#3824,#3849,#3857,.T.); +#3857 = CIRCLE('',#3858,4.E-02); +#3858 = AXIS2_PLACEMENT_3D('',#3859,#3860,#3861); +#3859 = CARTESIAN_POINT('',(0.6,0.545,1.17)); +#3860 = DIRECTION('',(1.,0.,-0.)); +#3861 = DIRECTION('',(0.,0.,1.)); +#3862 = ORIENTED_EDGE('',*,*,#3833,.F.); +#3863 = CYLINDRICAL_SURFACE('',#3864,4.E-02); +#3864 = AXIS2_PLACEMENT_3D('',#3865,#3866,#3867); +#3865 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#3866 = DIRECTION('',(1.,0.,0.)); +#3867 = DIRECTION('',(-0.,1.,0.)); +#3868 = ADVANCED_FACE('',(#3869),#3887,.T.); +#3869 = FACE_BOUND('',#3870,.T.); +#3870 = EDGE_LOOP('',(#3871,#3872,#3880,#3886)); +#3871 = ORIENTED_EDGE('',*,*,#3694,.F.); +#3872 = ORIENTED_EDGE('',*,*,#3873,.T.); +#3873 = EDGE_CURVE('',#3686,#3874,#3876,.T.); +#3874 = VERTEX_POINT('',#3875); +#3875 = CARTESIAN_POINT('',(0.6,-0.545,1.21)); +#3876 = LINE('',#3877,#3878); +#3877 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#3878 = VECTOR('',#3879,1.); +#3879 = DIRECTION('',(1.,0.,0.)); +#3880 = ORIENTED_EDGE('',*,*,#3881,.T.); +#3881 = EDGE_CURVE('',#3874,#3849,#3882,.T.); +#3882 = LINE('',#3883,#3884); +#3883 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#3884 = VECTOR('',#3885,1.); +#3885 = DIRECTION('',(0.,1.,0.)); +#3886 = ORIENTED_EDGE('',*,*,#3848,.F.); +#3887 = PLANE('',#3888); +#3888 = AXIS2_PLACEMENT_3D('',#3889,#3890,#3891); +#3889 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#3890 = DIRECTION('',(0.,0.,1.)); +#3891 = DIRECTION('',(1.,0.,-0.)); +#3892 = ADVANCED_FACE('',(#3893),#3912,.T.); +#3893 = FACE_BOUND('',#3894,.T.); +#3894 = EDGE_LOOP('',(#3895,#3903,#3910,#3911)); +#3895 = ORIENTED_EDGE('',*,*,#3896,.T.); +#3896 = EDGE_CURVE('',#3678,#3897,#3899,.T.); +#3897 = VERTEX_POINT('',#3898); +#3898 = CARTESIAN_POINT('',(0.6,-0.585,1.17)); +#3899 = LINE('',#3900,#3901); +#3900 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#3901 = VECTOR('',#3902,1.); +#3902 = DIRECTION('',(1.,0.,0.)); +#3903 = ORIENTED_EDGE('',*,*,#3904,.T.); +#3904 = EDGE_CURVE('',#3897,#3874,#3905,.T.); +#3905 = CIRCLE('',#3906,4.E-02); +#3906 = AXIS2_PLACEMENT_3D('',#3907,#3908,#3909); +#3907 = CARTESIAN_POINT('',(0.6,-0.545,1.17)); +#3908 = DIRECTION('',(-1.,0.,0.)); +#3909 = DIRECTION('',(0.,0.,1.)); +#3910 = ORIENTED_EDGE('',*,*,#3873,.F.); +#3911 = ORIENTED_EDGE('',*,*,#3685,.F.); +#3912 = CYLINDRICAL_SURFACE('',#3913,4.E-02); +#3913 = AXIS2_PLACEMENT_3D('',#3914,#3915,#3916); +#3914 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#3915 = DIRECTION('',(1.,0.,0.)); +#3916 = DIRECTION('',(0.,-1.,0.)); +#3917 = ADVANCED_FACE('',(#3918),#3929,.F.); +#3918 = FACE_BOUND('',#3919,.F.); +#3919 = EDGE_LOOP('',(#3920,#3926,#3927,#3928)); +#3920 = ORIENTED_EDGE('',*,*,#3921,.F.); +#3921 = EDGE_CURVE('',#3752,#3897,#3922,.T.); +#3922 = LINE('',#3923,#3924); +#3923 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#3924 = VECTOR('',#3925,1.); +#3925 = DIRECTION('',(0.,0.,1.)); +#3926 = ORIENTED_EDGE('',*,*,#3760,.F.); +#3927 = ORIENTED_EDGE('',*,*,#3677,.T.); +#3928 = ORIENTED_EDGE('',*,*,#3896,.T.); +#3929 = PLANE('',#3930); +#3930 = AXIS2_PLACEMENT_3D('',#3931,#3932,#3933); +#3931 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3932 = DIRECTION('',(0.,1.,0.)); +#3933 = DIRECTION('',(0.,-0.,1.)); +#3934 = ADVANCED_FACE('',(#3935,#4005),#4015,.F.); +#3935 = FACE_BOUND('',#3936,.F.); +#3936 = EDGE_LOOP('',(#3937,#3947,#3956,#3964,#3973,#3981,#3990,#3998)); +#3937 = ORIENTED_EDGE('',*,*,#3938,.F.); +#3938 = EDGE_CURVE('',#3939,#3941,#3943,.T.); +#3939 = VERTEX_POINT('',#3940); +#3940 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#3941 = VERTEX_POINT('',#3942); +#3942 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#3943 = LINE('',#3944,#3945); +#3944 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#3945 = VECTOR('',#3946,1.); +#3946 = DIRECTION('',(0.,0.,1.)); +#3947 = ORIENTED_EDGE('',*,*,#3948,.T.); +#3948 = EDGE_CURVE('',#3939,#3949,#3951,.T.); +#3949 = VERTEX_POINT('',#3950); +#3950 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#3951 = CIRCLE('',#3952,4.E-02); +#3952 = AXIS2_PLACEMENT_3D('',#3953,#3954,#3955); +#3953 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#3954 = DIRECTION('',(1.,0.,-0.)); +#3955 = DIRECTION('',(0.,0.,1.)); +#3956 = ORIENTED_EDGE('',*,*,#3957,.T.); +#3957 = EDGE_CURVE('',#3949,#3958,#3960,.T.); +#3958 = VERTEX_POINT('',#3959); +#3959 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#3960 = LINE('',#3961,#3962); +#3961 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#3962 = VECTOR('',#3963,1.); +#3963 = DIRECTION('',(0.,1.,0.)); +#3964 = ORIENTED_EDGE('',*,*,#3965,.F.); +#3965 = EDGE_CURVE('',#3966,#3958,#3968,.T.); +#3966 = VERTEX_POINT('',#3967); +#3967 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#3968 = CIRCLE('',#3969,4.E-02); +#3969 = AXIS2_PLACEMENT_3D('',#3970,#3971,#3972); +#3970 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#3971 = DIRECTION('',(-1.,0.,0.)); +#3972 = DIRECTION('',(0.,0.,1.)); +#3973 = ORIENTED_EDGE('',*,*,#3974,.T.); +#3974 = EDGE_CURVE('',#3966,#3975,#3977,.T.); +#3975 = VERTEX_POINT('',#3976); +#3976 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#3977 = LINE('',#3978,#3979); +#3978 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#3979 = VECTOR('',#3980,1.); +#3980 = DIRECTION('',(0.,0.,1.)); +#3981 = ORIENTED_EDGE('',*,*,#3982,.T.); +#3982 = EDGE_CURVE('',#3975,#3983,#3985,.T.); +#3983 = VERTEX_POINT('',#3984); +#3984 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#3985 = CIRCLE('',#3986,4.E-02); +#3986 = AXIS2_PLACEMENT_3D('',#3987,#3988,#3989); +#3987 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#3988 = DIRECTION('',(1.,0.,-0.)); +#3989 = DIRECTION('',(0.,0.,1.)); +#3990 = ORIENTED_EDGE('',*,*,#3991,.F.); +#3991 = EDGE_CURVE('',#3992,#3983,#3994,.T.); +#3992 = VERTEX_POINT('',#3993); +#3993 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#3994 = LINE('',#3995,#3996); +#3995 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#3996 = VECTOR('',#3997,1.); +#3997 = DIRECTION('',(0.,1.,0.)); +#3998 = ORIENTED_EDGE('',*,*,#3999,.F.); +#3999 = EDGE_CURVE('',#3941,#3992,#4000,.T.); +#4000 = CIRCLE('',#4001,4.E-02); +#4001 = AXIS2_PLACEMENT_3D('',#4002,#4003,#4004); +#4002 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#4003 = DIRECTION('',(-1.,0.,0.)); +#4004 = DIRECTION('',(0.,0.,1.)); +#4005 = FACE_BOUND('',#4006,.F.); +#4006 = EDGE_LOOP('',(#4007,#4008,#4009,#4010,#4011,#4012,#4013,#4014)); +#4007 = ORIENTED_EDGE('',*,*,#3751,.F.); +#4008 = ORIENTED_EDGE('',*,*,#3921,.T.); +#4009 = ORIENTED_EDGE('',*,*,#3904,.T.); +#4010 = ORIENTED_EDGE('',*,*,#3881,.T.); +#4011 = ORIENTED_EDGE('',*,*,#3856,.F.); +#4012 = ORIENTED_EDGE('',*,*,#3823,.F.); +#4013 = ORIENTED_EDGE('',*,*,#3806,.T.); +#4014 = ORIENTED_EDGE('',*,*,#3776,.F.); +#4015 = PLANE('',#4016); +#4016 = AXIS2_PLACEMENT_3D('',#4017,#4018,#4019); +#4017 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#4018 = DIRECTION('',(1.,0.,0.)); +#4019 = DIRECTION('',(0.,0.,1.)); +#4020 = ADVANCED_FACE('',(#4021),#4046,.F.); +#4021 = FACE_BOUND('',#4022,.F.); +#4022 = EDGE_LOOP('',(#4023,#4033,#4039,#4040)); +#4023 = ORIENTED_EDGE('',*,*,#4024,.F.); +#4024 = EDGE_CURVE('',#4025,#4027,#4029,.T.); +#4025 = VERTEX_POINT('',#4026); +#4026 = CARTESIAN_POINT('',(1.,-0.625,4.E-02)); +#4027 = VERTEX_POINT('',#4028); +#4028 = CARTESIAN_POINT('',(1.,-0.625,1.21)); +#4029 = LINE('',#4030,#4031); +#4030 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#4031 = VECTOR('',#4032,1.); +#4032 = DIRECTION('',(0.,0.,1.)); +#4033 = ORIENTED_EDGE('',*,*,#4034,.F.); +#4034 = EDGE_CURVE('',#3939,#4025,#4035,.T.); +#4035 = LINE('',#4036,#4037); +#4036 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#4037 = VECTOR('',#4038,1.); +#4038 = DIRECTION('',(1.,0.,0.)); +#4039 = ORIENTED_EDGE('',*,*,#3938,.T.); +#4040 = ORIENTED_EDGE('',*,*,#4041,.T.); +#4041 = EDGE_CURVE('',#3941,#4027,#4042,.T.); +#4042 = LINE('',#4043,#4044); +#4043 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#4044 = VECTOR('',#4045,1.); +#4045 = DIRECTION('',(1.,0.,0.)); +#4046 = PLANE('',#4047); +#4047 = AXIS2_PLACEMENT_3D('',#4048,#4049,#4050); +#4048 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#4049 = DIRECTION('',(0.,1.,0.)); +#4050 = DIRECTION('',(0.,-0.,1.)); +#4051 = ADVANCED_FACE('',(#4052),#4071,.T.); +#4052 = FACE_BOUND('',#4053,.T.); +#4053 = EDGE_LOOP('',(#4054,#4055,#4063,#4070)); +#4054 = ORIENTED_EDGE('',*,*,#3948,.T.); +#4055 = ORIENTED_EDGE('',*,*,#4056,.T.); +#4056 = EDGE_CURVE('',#3949,#4057,#4059,.T.); +#4057 = VERTEX_POINT('',#4058); +#4058 = CARTESIAN_POINT('',(1.,-0.585,0.)); +#4059 = LINE('',#4060,#4061); +#4060 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#4061 = VECTOR('',#4062,1.); +#4062 = DIRECTION('',(1.,0.,0.)); +#4063 = ORIENTED_EDGE('',*,*,#4064,.F.); +#4064 = EDGE_CURVE('',#4025,#4057,#4065,.T.); +#4065 = CIRCLE('',#4066,4.E-02); +#4066 = AXIS2_PLACEMENT_3D('',#4067,#4068,#4069); +#4067 = CARTESIAN_POINT('',(1.,-0.585,4.E-02)); +#4068 = DIRECTION('',(1.,0.,-0.)); +#4069 = DIRECTION('',(0.,0.,1.)); +#4070 = ORIENTED_EDGE('',*,*,#4034,.F.); +#4071 = CYLINDRICAL_SURFACE('',#4072,4.E-02); +#4072 = AXIS2_PLACEMENT_3D('',#4073,#4074,#4075); +#4073 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#4074 = DIRECTION('',(1.,0.,0.)); +#4075 = DIRECTION('',(0.,-1.,0.)); +#4076 = ADVANCED_FACE('',(#4077),#4096,.T.); +#4077 = FACE_BOUND('',#4078,.T.); +#4078 = EDGE_LOOP('',(#4079,#4080,#4089,#4095)); +#4079 = ORIENTED_EDGE('',*,*,#4041,.T.); +#4080 = ORIENTED_EDGE('',*,*,#4081,.T.); +#4081 = EDGE_CURVE('',#4027,#4082,#4084,.T.); +#4082 = VERTEX_POINT('',#4083); +#4083 = CARTESIAN_POINT('',(1.,-0.585,1.25)); +#4084 = CIRCLE('',#4085,4.E-02); +#4085 = AXIS2_PLACEMENT_3D('',#4086,#4087,#4088); +#4086 = CARTESIAN_POINT('',(1.,-0.585,1.21)); +#4087 = DIRECTION('',(-1.,0.,0.)); +#4088 = DIRECTION('',(0.,0.,1.)); +#4089 = ORIENTED_EDGE('',*,*,#4090,.F.); +#4090 = EDGE_CURVE('',#3992,#4082,#4091,.T.); +#4091 = LINE('',#4092,#4093); +#4092 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#4093 = VECTOR('',#4094,1.); +#4094 = DIRECTION('',(1.,0.,0.)); +#4095 = ORIENTED_EDGE('',*,*,#3999,.F.); +#4096 = CYLINDRICAL_SURFACE('',#4097,4.E-02); +#4097 = AXIS2_PLACEMENT_3D('',#4098,#4099,#4100); +#4098 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#4099 = DIRECTION('',(1.,0.,0.)); +#4100 = DIRECTION('',(0.,-1.,0.)); +#4101 = ADVANCED_FACE('',(#4102),#4120,.F.); +#4102 = FACE_BOUND('',#4103,.F.); +#4103 = EDGE_LOOP('',(#4104,#4105,#4106,#4114)); +#4104 = ORIENTED_EDGE('',*,*,#3957,.F.); +#4105 = ORIENTED_EDGE('',*,*,#4056,.T.); +#4106 = ORIENTED_EDGE('',*,*,#4107,.T.); +#4107 = EDGE_CURVE('',#4057,#4108,#4110,.T.); +#4108 = VERTEX_POINT('',#4109); +#4109 = CARTESIAN_POINT('',(1.,0.585,0.)); +#4110 = LINE('',#4111,#4112); +#4111 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#4112 = VECTOR('',#4113,1.); +#4113 = DIRECTION('',(0.,1.,0.)); +#4114 = ORIENTED_EDGE('',*,*,#4115,.F.); +#4115 = EDGE_CURVE('',#3958,#4108,#4116,.T.); +#4116 = LINE('',#4117,#4118); +#4117 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#4118 = VECTOR('',#4119,1.); +#4119 = DIRECTION('',(1.,0.,0.)); +#4120 = PLANE('',#4121); +#4121 = AXIS2_PLACEMENT_3D('',#4122,#4123,#4124); +#4122 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#4123 = DIRECTION('',(0.,0.,1.)); +#4124 = DIRECTION('',(1.,0.,-0.)); +#4125 = ADVANCED_FACE('',(#4126),#4144,.T.); +#4126 = FACE_BOUND('',#4127,.T.); +#4127 = EDGE_LOOP('',(#4128,#4129,#4130,#4138)); +#4128 = ORIENTED_EDGE('',*,*,#3991,.F.); +#4129 = ORIENTED_EDGE('',*,*,#4090,.T.); +#4130 = ORIENTED_EDGE('',*,*,#4131,.T.); +#4131 = EDGE_CURVE('',#4082,#4132,#4134,.T.); +#4132 = VERTEX_POINT('',#4133); +#4133 = CARTESIAN_POINT('',(1.,0.585,1.25)); +#4134 = LINE('',#4135,#4136); +#4135 = CARTESIAN_POINT('',(1.,-0.625,1.25)); +#4136 = VECTOR('',#4137,1.); +#4137 = DIRECTION('',(0.,1.,0.)); +#4138 = ORIENTED_EDGE('',*,*,#4139,.F.); +#4139 = EDGE_CURVE('',#3983,#4132,#4140,.T.); +#4140 = LINE('',#4141,#4142); +#4141 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#4142 = VECTOR('',#4143,1.); +#4143 = DIRECTION('',(1.,0.,0.)); +#4144 = PLANE('',#4145); +#4145 = AXIS2_PLACEMENT_3D('',#4146,#4147,#4148); +#4146 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#4147 = DIRECTION('',(0.,0.,1.)); +#4148 = DIRECTION('',(1.,0.,-0.)); +#4149 = ADVANCED_FACE('',(#4150),#4169,.T.); +#4150 = FACE_BOUND('',#4151,.T.); +#4151 = EDGE_LOOP('',(#4152,#4160,#4167,#4168)); +#4152 = ORIENTED_EDGE('',*,*,#4153,.T.); +#4153 = EDGE_CURVE('',#3966,#4154,#4156,.T.); +#4154 = VERTEX_POINT('',#4155); +#4155 = CARTESIAN_POINT('',(1.,0.625,4.E-02)); +#4156 = LINE('',#4157,#4158); +#4157 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#4158 = VECTOR('',#4159,1.); +#4159 = DIRECTION('',(1.,0.,0.)); +#4160 = ORIENTED_EDGE('',*,*,#4161,.T.); +#4161 = EDGE_CURVE('',#4154,#4108,#4162,.T.); +#4162 = CIRCLE('',#4163,4.E-02); +#4163 = AXIS2_PLACEMENT_3D('',#4164,#4165,#4166); +#4164 = CARTESIAN_POINT('',(1.,0.585,4.E-02)); +#4165 = DIRECTION('',(-1.,0.,0.)); +#4166 = DIRECTION('',(0.,0.,1.)); +#4167 = ORIENTED_EDGE('',*,*,#4115,.F.); +#4168 = ORIENTED_EDGE('',*,*,#3965,.F.); +#4169 = CYLINDRICAL_SURFACE('',#4170,4.E-02); +#4170 = AXIS2_PLACEMENT_3D('',#4171,#4172,#4173); +#4171 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#4172 = DIRECTION('',(1.,0.,0.)); +#4173 = DIRECTION('',(-0.,1.,0.)); +#4174 = ADVANCED_FACE('',(#4175),#4194,.T.); +#4175 = FACE_BOUND('',#4176,.T.); +#4176 = EDGE_LOOP('',(#4177,#4178,#4179,#4188)); +#4177 = ORIENTED_EDGE('',*,*,#3982,.T.); +#4178 = ORIENTED_EDGE('',*,*,#4139,.T.); +#4179 = ORIENTED_EDGE('',*,*,#4180,.F.); +#4180 = EDGE_CURVE('',#4181,#4132,#4183,.T.); +#4181 = VERTEX_POINT('',#4182); +#4182 = CARTESIAN_POINT('',(1.,0.625,1.21)); +#4183 = CIRCLE('',#4184,4.E-02); +#4184 = AXIS2_PLACEMENT_3D('',#4185,#4186,#4187); +#4185 = CARTESIAN_POINT('',(1.,0.585,1.21)); +#4186 = DIRECTION('',(1.,0.,-0.)); +#4187 = DIRECTION('',(0.,0.,1.)); +#4188 = ORIENTED_EDGE('',*,*,#4189,.F.); +#4189 = EDGE_CURVE('',#3975,#4181,#4190,.T.); +#4190 = LINE('',#4191,#4192); +#4191 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#4192 = VECTOR('',#4193,1.); +#4193 = DIRECTION('',(1.,0.,0.)); +#4194 = CYLINDRICAL_SURFACE('',#4195,4.E-02); +#4195 = AXIS2_PLACEMENT_3D('',#4196,#4197,#4198); +#4196 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#4197 = DIRECTION('',(1.,0.,0.)); +#4198 = DIRECTION('',(-0.,1.,0.)); +#4199 = ADVANCED_FACE('',(#4200),#4211,.T.); +#4200 = FACE_BOUND('',#4201,.T.); +#4201 = EDGE_LOOP('',(#4202,#4208,#4209,#4210)); +#4202 = ORIENTED_EDGE('',*,*,#4203,.F.); +#4203 = EDGE_CURVE('',#4154,#4181,#4204,.T.); +#4204 = LINE('',#4205,#4206); +#4205 = CARTESIAN_POINT('',(1.,0.625,0.)); +#4206 = VECTOR('',#4207,1.); +#4207 = DIRECTION('',(0.,0.,1.)); +#4208 = ORIENTED_EDGE('',*,*,#4153,.F.); +#4209 = ORIENTED_EDGE('',*,*,#3974,.T.); +#4210 = ORIENTED_EDGE('',*,*,#4189,.T.); +#4211 = PLANE('',#4212); +#4212 = AXIS2_PLACEMENT_3D('',#4213,#4214,#4215); +#4213 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#4214 = DIRECTION('',(0.,1.,0.)); +#4215 = DIRECTION('',(0.,-0.,1.)); +#4216 = ADVANCED_FACE('',(#4217),#4227,.T.); +#4217 = FACE_BOUND('',#4218,.T.); +#4218 = EDGE_LOOP('',(#4219,#4220,#4221,#4222,#4223,#4224,#4225,#4226)); +#4219 = ORIENTED_EDGE('',*,*,#4024,.F.); +#4220 = ORIENTED_EDGE('',*,*,#4064,.T.); +#4221 = ORIENTED_EDGE('',*,*,#4107,.T.); +#4222 = ORIENTED_EDGE('',*,*,#4161,.F.); +#4223 = ORIENTED_EDGE('',*,*,#4203,.T.); +#4224 = ORIENTED_EDGE('',*,*,#4180,.T.); +#4225 = ORIENTED_EDGE('',*,*,#4131,.F.); +#4226 = ORIENTED_EDGE('',*,*,#4081,.F.); +#4227 = PLANE('',#4228); +#4228 = AXIS2_PLACEMENT_3D('',#4229,#4230,#4231); +#4229 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#4230 = DIRECTION('',(1.,0.,0.)); +#4231 = DIRECTION('',(0.,0.,1.)); +#4232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#4236)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#4233,#4234,#4235)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#4233 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#4234 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#4235 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#4236 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#4233, + 'distance_accuracy_value','confusion accuracy'); +#4237 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4238,#4240); +#4238 = ( REPRESENTATION_RELATIONSHIP('','',#3377,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4239) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4239 = ITEM_DEFINED_TRANSFORMATION('','',#11,#47); +#4240 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4241); +#4241 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('9','C5','',#5,#3372,$); +#4242 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#3374)); +#4243 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4244,#4246); +#4244 = ( REPRESENTATION_RELATIONSHIP('','',#3377,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4245) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4245 = ITEM_DEFINED_TRANSFORMATION('','',#11,#51); +#4246 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4247); +#4247 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','C6','',#5,#3372,$); +#4248 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4249,#4251); +#4249 = ( REPRESENTATION_RELATIONSHIP('','',#1606,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4250) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4250 = ITEM_DEFINED_TRANSFORMATION('','',#11,#55); +#4251 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4252); +#4252 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','C7','',#5,#1601,$); +#4253 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4254,#4256); +#4254 = ( REPRESENTATION_RELATIONSHIP('','',#1606,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4255) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4255 = ITEM_DEFINED_TRANSFORMATION('','',#11,#59); +#4256 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4257); +#4257 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12','C8','',#5,#1601,$); +#4258 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4259,#4261); +#4259 = ( REPRESENTATION_RELATIONSHIP('','',#3377,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4260) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4260 = ITEM_DEFINED_TRANSFORMATION('','',#11,#63); +#4261 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4262); +#4262 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('13','C9','',#5,#3372,$); +#4263 = SHAPE_DEFINITION_REPRESENTATION(#4264,#4270); +#4264 = PRODUCT_DEFINITION_SHAPE('','',#4265); +#4265 = PRODUCT_DEFINITION('design','',#4266,#4269); +#4266 = PRODUCT_DEFINITION_FORMATION('','',#4267); +#4267 = PRODUCT('D_SMA','D_SMA','',(#4268)); +#4268 = PRODUCT_CONTEXT('',#2,'mechanical'); +#4269 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#4270 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#4271),#5479); +#4271 = MANIFOLD_SOLID_BREP('',#4272); +#4272 = CLOSED_SHELL('',(#4273,#4313,#4396,#4421,#4496,#4513,#4530,#4547 + ,#4564,#4581,#4597,#4644,#4679,#4718,#4747,#4786,#4815,#4869,#4912, + #4935,#4958,#4981,#5032,#5055,#5072,#5146,#5170,#5237,#5249,#5261, + #5278,#5307,#5330,#5353,#5370,#5392,#5404,#5421,#5438,#5455,#5467)); +#4273 = ADVANCED_FACE('',(#4274),#4308,.T.); +#4274 = FACE_BOUND('',#4275,.T.); +#4275 = EDGE_LOOP('',(#4276,#4286,#4294,#4302)); +#4276 = ORIENTED_EDGE('',*,*,#4277,.T.); +#4277 = EDGE_CURVE('',#4278,#4280,#4282,.T.); +#4278 = VERTEX_POINT('',#4279); +#4279 = CARTESIAN_POINT('',(1.14,0.75,0.)); +#4280 = VERTEX_POINT('',#4281); +#4281 = CARTESIAN_POINT('',(2.353333333333,0.75,-2.775557561563E-17)); +#4282 = LINE('',#4283,#4284); +#4283 = CARTESIAN_POINT('',(2.28,0.75,0.)); +#4284 = VECTOR('',#4285,1.); +#4285 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4286 = ORIENTED_EDGE('',*,*,#4287,.T.); +#4287 = EDGE_CURVE('',#4280,#4288,#4290,.T.); +#4288 = VERTEX_POINT('',#4289); +#4289 = CARTESIAN_POINT('',(2.353333333333,-0.75,-2.775557561563E-17)); +#4290 = LINE('',#4291,#4292); +#4291 = CARTESIAN_POINT('',(2.353333333333,0.75,-2.775557561563E-17)); +#4292 = VECTOR('',#4293,1.); +#4293 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4294 = ORIENTED_EDGE('',*,*,#4295,.T.); +#4295 = EDGE_CURVE('',#4288,#4296,#4298,.T.); +#4296 = VERTEX_POINT('',#4297); +#4297 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4298 = LINE('',#4299,#4300); +#4299 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#4300 = VECTOR('',#4301,1.); +#4301 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4302 = ORIENTED_EDGE('',*,*,#4303,.T.); +#4303 = EDGE_CURVE('',#4296,#4278,#4304,.T.); +#4304 = LINE('',#4305,#4306); +#4305 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4306 = VECTOR('',#4307,1.); +#4307 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4308 = PLANE('',#4309); +#4309 = AXIS2_PLACEMENT_3D('',#4310,#4311,#4312); +#4310 = CARTESIAN_POINT('',(1.746666666667,-5.821951347626E-16, + -7.671995716851E-18)); +#4311 = DIRECTION('',(-1.332277103521E-17,5.237186372803E-33,-1.)); +#4312 = DIRECTION('',(1.,-2.22044604925E-16,-1.332277103521E-17)); +#4313 = ADVANCED_FACE('',(#4314),#4391,.T.); +#4314 = FACE_BOUND('',#4315,.T.); +#4315 = EDGE_LOOP('',(#4316,#4326,#4333,#4334,#4342,#4350,#4360,#4368, + #4376,#4384)); +#4316 = ORIENTED_EDGE('',*,*,#4317,.F.); +#4317 = EDGE_CURVE('',#4318,#4320,#4322,.T.); +#4318 = VERTEX_POINT('',#4319); +#4319 = CARTESIAN_POINT('',(2.5,0.75,0.146666666667)); +#4320 = VERTEX_POINT('',#4321); +#4321 = CARTESIAN_POINT('',(2.5,0.75,0.842343333333)); +#4322 = LINE('',#4323,#4324); +#4323 = CARTESIAN_POINT('',(2.5,0.75,0.)); +#4324 = VECTOR('',#4325,1.); +#4325 = DIRECTION('',(0.,0.,1.)); +#4326 = ORIENTED_EDGE('',*,*,#4327,.T.); +#4327 = EDGE_CURVE('',#4318,#4280,#4328,.T.); +#4328 = CIRCLE('',#4329,0.146666666667); +#4329 = AXIS2_PLACEMENT_3D('',#4330,#4331,#4332); +#4330 = CARTESIAN_POINT('',(2.353333333333,0.75,0.146666666667)); +#4331 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#4332 = DIRECTION('',(0.,0.,1.)); +#4333 = ORIENTED_EDGE('',*,*,#4277,.F.); +#4334 = ORIENTED_EDGE('',*,*,#4335,.T.); +#4335 = EDGE_CURVE('',#4278,#4336,#4338,.T.); +#4336 = VERTEX_POINT('',#4337); +#4337 = CARTESIAN_POINT('',(1.14,0.75,0.22)); +#4338 = LINE('',#4339,#4340); +#4339 = CARTESIAN_POINT('',(1.14,0.75,0.)); +#4340 = VECTOR('',#4341,1.); +#4341 = DIRECTION('',(0.,0.,1.)); +#4342 = ORIENTED_EDGE('',*,*,#4343,.F.); +#4343 = EDGE_CURVE('',#4344,#4336,#4346,.T.); +#4344 = VERTEX_POINT('',#4345); +#4345 = CARTESIAN_POINT('',(2.225259344883,0.75,0.22)); +#4346 = LINE('',#4347,#4348); +#4347 = CARTESIAN_POINT('',(2.108163247245,0.75,0.22)); +#4348 = VECTOR('',#4349,1.); +#4349 = DIRECTION('',(-1.,4.514825988711E-16,0.)); +#4350 = ORIENTED_EDGE('',*,*,#4351,.T.); +#4351 = EDGE_CURVE('',#4344,#4352,#4354,.T.); +#4352 = VERTEX_POINT('',#4353); +#4353 = CARTESIAN_POINT('',(2.225413939802,0.75,0.2222)); +#4354 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4355,#4356,#4357,#4358,#4359), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4355 = CARTESIAN_POINT('',(2.225259344883,0.75,0.22)); +#4356 = CARTESIAN_POINT('',(2.238768685756,0.75,0.412247910026)); +#4357 = CARTESIAN_POINT('',(2.25227825666,0.75,0.604499093572)); +#4358 = CARTESIAN_POINT('',(2.265788033788,0.75,0.796753211837)); +#4359 = CARTESIAN_POINT('',(2.279297998531,0.75,0.98901)); +#4360 = ORIENTED_EDGE('',*,*,#4361,.T.); +#4361 = EDGE_CURVE('',#4352,#4362,#4364,.T.); +#4362 = VERTEX_POINT('',#4363); +#4363 = CARTESIAN_POINT('',(2.28,0.75,0.2222)); +#4364 = LINE('',#4365,#4366); +#4365 = CARTESIAN_POINT('',(1.14,0.75,0.2222)); +#4366 = VECTOR('',#4367,1.); +#4367 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4368 = ORIENTED_EDGE('',*,*,#4369,.T.); +#4369 = EDGE_CURVE('',#4362,#4370,#4372,.T.); +#4370 = VERTEX_POINT('',#4371); +#4371 = CARTESIAN_POINT('',(2.28,0.75,0.98901)); +#4372 = LINE('',#4373,#4374); +#4373 = CARTESIAN_POINT('',(2.28,0.75,0.)); +#4374 = VECTOR('',#4375,1.); +#4375 = DIRECTION('',(0.,0.,1.)); +#4376 = ORIENTED_EDGE('',*,*,#4377,.T.); +#4377 = EDGE_CURVE('',#4370,#4378,#4380,.T.); +#4378 = VERTEX_POINT('',#4379); +#4379 = CARTESIAN_POINT('',(2.353333333333,0.75,0.98901)); +#4380 = LINE('',#4381,#4382); +#4381 = CARTESIAN_POINT('',(2.28,0.75,0.98901)); +#4382 = VECTOR('',#4383,1.); +#4383 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4384 = ORIENTED_EDGE('',*,*,#4385,.F.); +#4385 = EDGE_CURVE('',#4320,#4378,#4386,.T.); +#4386 = CIRCLE('',#4387,0.146666666667); +#4387 = AXIS2_PLACEMENT_3D('',#4388,#4389,#4390); +#4388 = CARTESIAN_POINT('',(2.353333333333,0.75,0.842343333333)); +#4389 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4390 = DIRECTION('',(0.,0.,1.)); +#4391 = PLANE('',#4392); +#4392 = AXIS2_PLACEMENT_3D('',#4393,#4394,#4395); +#4393 = CARTESIAN_POINT('',(1.991067149606,0.75,0.303091083877)); +#4394 = DIRECTION('',(4.514825988711E-16,1.,5.822139933717E-17)); +#4395 = DIRECTION('',(-1.,4.514825988711E-16,0.)); +#4396 = ADVANCED_FACE('',(#4397),#4416,.T.); +#4397 = FACE_BOUND('',#4398,.T.); +#4398 = EDGE_LOOP('',(#4399,#4407,#4414,#4415)); +#4399 = ORIENTED_EDGE('',*,*,#4400,.T.); +#4400 = EDGE_CURVE('',#4318,#4401,#4403,.T.); +#4401 = VERTEX_POINT('',#4402); +#4402 = CARTESIAN_POINT('',(2.5,-0.75,0.146666666667)); +#4403 = LINE('',#4404,#4405); +#4404 = CARTESIAN_POINT('',(2.5,0.75,0.146666666667)); +#4405 = VECTOR('',#4406,1.); +#4406 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4407 = ORIENTED_EDGE('',*,*,#4408,.T.); +#4408 = EDGE_CURVE('',#4401,#4288,#4409,.T.); +#4409 = CIRCLE('',#4410,0.146666666667); +#4410 = AXIS2_PLACEMENT_3D('',#4411,#4412,#4413); +#4411 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.146666666667)); +#4412 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#4413 = DIRECTION('',(0.,0.,1.)); +#4414 = ORIENTED_EDGE('',*,*,#4287,.F.); +#4415 = ORIENTED_EDGE('',*,*,#4327,.F.); +#4416 = CYLINDRICAL_SURFACE('',#4417,0.146666666667); +#4417 = AXIS2_PLACEMENT_3D('',#4418,#4419,#4420); +#4418 = CARTESIAN_POINT('',(2.353333333333,0.75,0.146666666667)); +#4419 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4420 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4421 = ADVANCED_FACE('',(#4422),#4491,.T.); +#4422 = FACE_BOUND('',#4423,.T.); +#4423 = EDGE_LOOP('',(#4424,#4425,#4433,#4442,#4450,#4458,#4466,#4476, + #4484,#4490)); +#4424 = ORIENTED_EDGE('',*,*,#4408,.F.); +#4425 = ORIENTED_EDGE('',*,*,#4426,.T.); +#4426 = EDGE_CURVE('',#4401,#4427,#4429,.T.); +#4427 = VERTEX_POINT('',#4428); +#4428 = CARTESIAN_POINT('',(2.5,-0.75,0.842343333333)); +#4429 = LINE('',#4430,#4431); +#4430 = CARTESIAN_POINT('',(2.5,-0.75,0.)); +#4431 = VECTOR('',#4432,1.); +#4432 = DIRECTION('',(0.,0.,1.)); +#4433 = ORIENTED_EDGE('',*,*,#4434,.T.); +#4434 = EDGE_CURVE('',#4427,#4435,#4437,.T.); +#4435 = VERTEX_POINT('',#4436); +#4436 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.98901)); +#4437 = CIRCLE('',#4438,0.146666666667); +#4438 = AXIS2_PLACEMENT_3D('',#4439,#4440,#4441); +#4439 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.842343333333)); +#4440 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4441 = DIRECTION('',(0.,0.,1.)); +#4442 = ORIENTED_EDGE('',*,*,#4443,.T.); +#4443 = EDGE_CURVE('',#4435,#4444,#4446,.T.); +#4444 = VERTEX_POINT('',#4445); +#4445 = CARTESIAN_POINT('',(2.28,-0.75,0.98901)); +#4446 = LINE('',#4447,#4448); +#4447 = CARTESIAN_POINT('',(2.5,-0.75,0.98901)); +#4448 = VECTOR('',#4449,1.); +#4449 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4450 = ORIENTED_EDGE('',*,*,#4451,.F.); +#4451 = EDGE_CURVE('',#4452,#4444,#4454,.T.); +#4452 = VERTEX_POINT('',#4453); +#4453 = CARTESIAN_POINT('',(2.28,-0.75,0.2222)); +#4454 = LINE('',#4455,#4456); +#4455 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#4456 = VECTOR('',#4457,1.); +#4457 = DIRECTION('',(0.,0.,1.)); +#4458 = ORIENTED_EDGE('',*,*,#4459,.T.); +#4459 = EDGE_CURVE('',#4452,#4460,#4462,.T.); +#4460 = VERTEX_POINT('',#4461); +#4461 = CARTESIAN_POINT('',(2.225413939802,-0.75,0.2222)); +#4462 = LINE('',#4463,#4464); +#4463 = CARTESIAN_POINT('',(2.28,-0.75,0.2222)); +#4464 = VECTOR('',#4465,1.); +#4465 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4466 = ORIENTED_EDGE('',*,*,#4467,.F.); +#4467 = EDGE_CURVE('',#4468,#4460,#4470,.T.); +#4468 = VERTEX_POINT('',#4469); +#4469 = CARTESIAN_POINT('',(2.225259344883,-0.75,0.22)); +#4470 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4471,#4472,#4473,#4474,#4475), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4471 = CARTESIAN_POINT('',(2.225259344883,-0.75,0.22)); +#4472 = CARTESIAN_POINT('',(2.238768685756,-0.75,0.412247910026)); +#4473 = CARTESIAN_POINT('',(2.25227825666,-0.75,0.604499093572)); +#4474 = CARTESIAN_POINT('',(2.265788033788,-0.75,0.796753211837)); +#4475 = CARTESIAN_POINT('',(2.279297998531,-0.75,0.98901)); +#4476 = ORIENTED_EDGE('',*,*,#4477,.F.); +#4477 = EDGE_CURVE('',#4478,#4468,#4480,.T.); +#4478 = VERTEX_POINT('',#4479); +#4479 = CARTESIAN_POINT('',(1.14,-0.75,0.22)); +#4480 = LINE('',#4481,#4482); +#4481 = CARTESIAN_POINT('',(2.108163247245,-0.75,0.22)); +#4482 = VECTOR('',#4483,1.); +#4483 = DIRECTION('',(1.,-2.844998265321E-16,-0.)); +#4484 = ORIENTED_EDGE('',*,*,#4485,.F.); +#4485 = EDGE_CURVE('',#4296,#4478,#4486,.T.); +#4486 = LINE('',#4487,#4488); +#4487 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4488 = VECTOR('',#4489,1.); +#4489 = DIRECTION('',(0.,0.,1.)); +#4490 = ORIENTED_EDGE('',*,*,#4295,.F.); +#4491 = PLANE('',#4492); +#4492 = AXIS2_PLACEMENT_3D('',#4493,#4494,#4495); +#4493 = CARTESIAN_POINT('',(1.991067149606,-0.75,0.303091083877)); +#4494 = DIRECTION('',(-2.844998265321E-16,-1.,-7.396066644327E-17)); +#4495 = DIRECTION('',(1.642256696039E-32,7.396066644327E-17,-1.)); +#4496 = ADVANCED_FACE('',(#4497),#4508,.T.); +#4497 = FACE_BOUND('',#4498,.T.); +#4498 = EDGE_LOOP('',(#4499,#4500,#4501,#4507)); +#4499 = ORIENTED_EDGE('',*,*,#4303,.F.); +#4500 = ORIENTED_EDGE('',*,*,#4485,.T.); +#4501 = ORIENTED_EDGE('',*,*,#4502,.F.); +#4502 = EDGE_CURVE('',#4336,#4478,#4503,.T.); +#4503 = LINE('',#4504,#4505); +#4504 = CARTESIAN_POINT('',(1.14,-1.022629672442,0.22)); +#4505 = VECTOR('',#4506,1.); +#4506 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4507 = ORIENTED_EDGE('',*,*,#4335,.F.); +#4508 = PLANE('',#4509); +#4509 = AXIS2_PLACEMENT_3D('',#4510,#4511,#4512); +#4510 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4511 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4512 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4513 = ADVANCED_FACE('',(#4514),#4525,.T.); +#4514 = FACE_BOUND('',#4515,.T.); +#4515 = EDGE_LOOP('',(#4516,#4517,#4523,#4524)); +#4516 = ORIENTED_EDGE('',*,*,#4317,.T.); +#4517 = ORIENTED_EDGE('',*,*,#4518,.T.); +#4518 = EDGE_CURVE('',#4320,#4427,#4519,.T.); +#4519 = LINE('',#4520,#4521); +#4520 = CARTESIAN_POINT('',(2.5,0.75,0.842343333333)); +#4521 = VECTOR('',#4522,1.); +#4522 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4523 = ORIENTED_EDGE('',*,*,#4426,.F.); +#4524 = ORIENTED_EDGE('',*,*,#4400,.F.); +#4525 = PLANE('',#4526); +#4526 = AXIS2_PLACEMENT_3D('',#4527,#4528,#4529); +#4527 = CARTESIAN_POINT('',(2.5,0.75,0.)); +#4528 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4529 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4530 = ADVANCED_FACE('',(#4531),#4542,.T.); +#4531 = FACE_BOUND('',#4532,.T.); +#4532 = EDGE_LOOP('',(#4533,#4534,#4540,#4541)); +#4533 = ORIENTED_EDGE('',*,*,#4385,.T.); +#4534 = ORIENTED_EDGE('',*,*,#4535,.T.); +#4535 = EDGE_CURVE('',#4378,#4435,#4536,.T.); +#4536 = LINE('',#4537,#4538); +#4537 = CARTESIAN_POINT('',(2.353333333333,0.75,0.98901)); +#4538 = VECTOR('',#4539,1.); +#4539 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4540 = ORIENTED_EDGE('',*,*,#4434,.F.); +#4541 = ORIENTED_EDGE('',*,*,#4518,.F.); +#4542 = CYLINDRICAL_SURFACE('',#4543,0.146666666667); +#4543 = AXIS2_PLACEMENT_3D('',#4544,#4545,#4546); +#4544 = CARTESIAN_POINT('',(2.353333333333,0.75,0.842343333333)); +#4545 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4546 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4547 = ADVANCED_FACE('',(#4548),#4559,.F.); +#4548 = FACE_BOUND('',#4549,.F.); +#4549 = EDGE_LOOP('',(#4550,#4551,#4552,#4553)); +#4550 = ORIENTED_EDGE('',*,*,#4377,.T.); +#4551 = ORIENTED_EDGE('',*,*,#4535,.T.); +#4552 = ORIENTED_EDGE('',*,*,#4443,.T.); +#4553 = ORIENTED_EDGE('',*,*,#4554,.T.); +#4554 = EDGE_CURVE('',#4444,#4370,#4555,.T.); +#4555 = LINE('',#4556,#4557); +#4556 = CARTESIAN_POINT('',(2.28,-0.75,0.98901)); +#4557 = VECTOR('',#4558,1.); +#4558 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4559 = PLANE('',#4560); +#4560 = AXIS2_PLACEMENT_3D('',#4561,#4562,#4563); +#4561 = CARTESIAN_POINT('',(2.39,-6.661338147751E-16,0.98901)); +#4562 = DIRECTION('',(0.,0.,-1.)); +#4563 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4564 = ADVANCED_FACE('',(#4565),#4576,.T.); +#4565 = FACE_BOUND('',#4566,.T.); +#4566 = EDGE_LOOP('',(#4567,#4573,#4574,#4575)); +#4567 = ORIENTED_EDGE('',*,*,#4568,.T.); +#4568 = EDGE_CURVE('',#4362,#4452,#4569,.T.); +#4569 = LINE('',#4570,#4571); +#4570 = CARTESIAN_POINT('',(2.28,0.75,0.2222)); +#4571 = VECTOR('',#4572,1.); +#4572 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4573 = ORIENTED_EDGE('',*,*,#4451,.T.); +#4574 = ORIENTED_EDGE('',*,*,#4554,.T.); +#4575 = ORIENTED_EDGE('',*,*,#4369,.F.); +#4576 = PLANE('',#4577); +#4577 = AXIS2_PLACEMENT_3D('',#4578,#4579,#4580); +#4578 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#4579 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4580 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4581 = ADVANCED_FACE('',(#4582),#4592,.F.); +#4582 = FACE_BOUND('',#4583,.F.); +#4583 = EDGE_LOOP('',(#4584,#4589,#4590,#4591)); +#4584 = ORIENTED_EDGE('',*,*,#4585,.F.); +#4585 = EDGE_CURVE('',#4352,#4460,#4586,.T.); +#4586 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4587,#4588),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4587 = CARTESIAN_POINT('',(2.225413939802,0.75,0.2222)); +#4588 = CARTESIAN_POINT('',(2.225413939802,-0.75,0.2222)); +#4589 = ORIENTED_EDGE('',*,*,#4361,.T.); +#4590 = ORIENTED_EDGE('',*,*,#4568,.T.); +#4591 = ORIENTED_EDGE('',*,*,#4459,.T.); +#4592 = PLANE('',#4593); +#4593 = AXIS2_PLACEMENT_3D('',#4594,#4595,#4596); +#4594 = CARTESIAN_POINT('',(1.71,-5.551115123126E-16,0.2222)); +#4595 = DIRECTION('',(0.,0.,-1.)); +#4596 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4597 = ADVANCED_FACE('',(#4598),#4639,.T.); +#4598 = FACE_BOUND('',#4599,.T.); +#4599 = EDGE_LOOP('',(#4600,#4609,#4615,#4616,#4617,#4618,#4626,#4633)); +#4600 = ORIENTED_EDGE('',*,*,#4601,.F.); +#4601 = EDGE_CURVE('',#4602,#4604,#4606,.T.); +#4602 = VERTEX_POINT('',#4603); +#4603 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4604 = VERTEX_POINT('',#4605); +#4605 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4606 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4607,#4608),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4607 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4608 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4609 = ORIENTED_EDGE('',*,*,#4610,.T.); +#4610 = EDGE_CURVE('',#4602,#4468,#4611,.T.); +#4611 = LINE('',#4612,#4613); +#4612 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4613 = VECTOR('',#4614,1.); +#4614 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4615 = ORIENTED_EDGE('',*,*,#4467,.T.); +#4616 = ORIENTED_EDGE('',*,*,#4585,.F.); +#4617 = ORIENTED_EDGE('',*,*,#4351,.F.); +#4618 = ORIENTED_EDGE('',*,*,#4619,.T.); +#4619 = EDGE_CURVE('',#4344,#4620,#4622,.T.); +#4620 = VERTEX_POINT('',#4621); +#4621 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4622 = LINE('',#4623,#4624); +#4623 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4624 = VECTOR('',#4625,1.); +#4625 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4626 = ORIENTED_EDGE('',*,*,#4627,.T.); +#4627 = EDGE_CURVE('',#4620,#4628,#4630,.T.); +#4628 = VERTEX_POINT('',#4629); +#4629 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4630 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4631,#4632),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4631 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4632 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4633 = ORIENTED_EDGE('',*,*,#4634,.F.); +#4634 = EDGE_CURVE('',#4604,#4628,#4635,.T.); +#4635 = LINE('',#4636,#4637); +#4636 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4637 = VECTOR('',#4638,1.); +#4638 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4639 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4640,#4641) + ,(#4642,#4643 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4640 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4641 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4642 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4643 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4644 = ADVANCED_FACE('',(#4645),#4674,.T.); +#4645 = FACE_BOUND('',#4646,.T.); +#4646 = EDGE_LOOP('',(#4647,#4648,#4656,#4664,#4670,#4671,#4672,#4673)); +#4647 = ORIENTED_EDGE('',*,*,#4610,.F.); +#4648 = ORIENTED_EDGE('',*,*,#4649,.F.); +#4649 = EDGE_CURVE('',#4650,#4602,#4652,.T.); +#4650 = VERTEX_POINT('',#4651); +#4651 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#4652 = LINE('',#4653,#4654); +#4653 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4654 = VECTOR('',#4655,1.); +#4655 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4656 = ORIENTED_EDGE('',*,*,#4657,.T.); +#4657 = EDGE_CURVE('',#4650,#4658,#4660,.T.); +#4658 = VERTEX_POINT('',#4659); +#4659 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#4660 = LINE('',#4661,#4662); +#4661 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#4662 = VECTOR('',#4663,1.); +#4663 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4664 = ORIENTED_EDGE('',*,*,#4665,.F.); +#4665 = EDGE_CURVE('',#4620,#4658,#4666,.T.); +#4666 = LINE('',#4667,#4668); +#4667 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4668 = VECTOR('',#4669,1.); +#4669 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4670 = ORIENTED_EDGE('',*,*,#4619,.F.); +#4671 = ORIENTED_EDGE('',*,*,#4343,.T.); +#4672 = ORIENTED_EDGE('',*,*,#4502,.T.); +#4673 = ORIENTED_EDGE('',*,*,#4477,.T.); +#4674 = PLANE('',#4675); +#4675 = AXIS2_PLACEMENT_3D('',#4676,#4677,#4678); +#4676 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4677 = DIRECTION('',(0.,0.,-1.)); +#4678 = DIRECTION('',(-0.864253276514,0.503056929218,0.)); +#4679 = ADVANCED_FACE('',(#4680),#4713,.T.); +#4680 = FACE_BOUND('',#4681,.T.); +#4681 = EDGE_LOOP('',(#4682,#4692,#4698,#4699,#4700,#4708)); +#4682 = ORIENTED_EDGE('',*,*,#4683,.T.); +#4683 = EDGE_CURVE('',#4684,#4686,#4688,.T.); +#4684 = VERTEX_POINT('',#4685); +#4685 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4686 = VERTEX_POINT('',#4687); +#4687 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#4688 = LINE('',#4689,#4690); +#4689 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4690 = VECTOR('',#4691,1.); +#4691 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4692 = ORIENTED_EDGE('',*,*,#4693,.T.); +#4693 = EDGE_CURVE('',#4686,#4650,#4694,.T.); +#4694 = LINE('',#4695,#4696); +#4695 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#4696 = VECTOR('',#4697,1.); +#4697 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4698 = ORIENTED_EDGE('',*,*,#4649,.T.); +#4699 = ORIENTED_EDGE('',*,*,#4601,.T.); +#4700 = ORIENTED_EDGE('',*,*,#4701,.F.); +#4701 = EDGE_CURVE('',#4702,#4604,#4704,.T.); +#4702 = VERTEX_POINT('',#4703); +#4703 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4704 = LINE('',#4705,#4706); +#4705 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4706 = VECTOR('',#4707,1.); +#4707 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4708 = ORIENTED_EDGE('',*,*,#4709,.F.); +#4709 = EDGE_CURVE('',#4684,#4702,#4710,.T.); +#4710 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4711,#4712),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4711 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4712 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4713 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4714,#4715) + ,(#4716,#4717 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4714 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4715 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4716 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4717 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4718 = ADVANCED_FACE('',(#4719),#4742,.T.); +#4719 = FACE_BOUND('',#4720,.T.); +#4720 = EDGE_LOOP('',(#4721,#4722,#4729,#4737)); +#4721 = ORIENTED_EDGE('',*,*,#4634,.T.); +#4722 = ORIENTED_EDGE('',*,*,#4723,.T.); +#4723 = EDGE_CURVE('',#4628,#4724,#4726,.T.); +#4724 = VERTEX_POINT('',#4725); +#4725 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#4726 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4727,#4728),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4727 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4728 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#4729 = ORIENTED_EDGE('',*,*,#4730,.F.); +#4730 = EDGE_CURVE('',#4731,#4724,#4733,.T.); +#4731 = VERTEX_POINT('',#4732); +#4732 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4733 = LINE('',#4734,#4735); +#4734 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4735 = VECTOR('',#4736,1.); +#4736 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4737 = ORIENTED_EDGE('',*,*,#4738,.F.); +#4738 = EDGE_CURVE('',#4604,#4731,#4739,.T.); +#4739 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4740,#4741),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4740 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4741 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4742 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4743,#4744) + ,(#4745,#4746 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4743 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4744 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4745 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4746 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#4747 = ADVANCED_FACE('',(#4748),#4781,.T.); +#4748 = FACE_BOUND('',#4749,.T.); +#4749 = EDGE_LOOP('',(#4750,#4751,#4759,#4767,#4774,#4780)); +#4750 = ORIENTED_EDGE('',*,*,#4665,.T.); +#4751 = ORIENTED_EDGE('',*,*,#4752,.T.); +#4752 = EDGE_CURVE('',#4658,#4753,#4755,.T.); +#4753 = VERTEX_POINT('',#4754); +#4754 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#4755 = LINE('',#4756,#4757); +#4756 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#4757 = VECTOR('',#4758,1.); +#4758 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4759 = ORIENTED_EDGE('',*,*,#4760,.T.); +#4760 = EDGE_CURVE('',#4753,#4761,#4763,.T.); +#4761 = VERTEX_POINT('',#4762); +#4762 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4763 = LINE('',#4764,#4765); +#4764 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4765 = VECTOR('',#4766,1.); +#4766 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4767 = ORIENTED_EDGE('',*,*,#4768,.T.); +#4768 = EDGE_CURVE('',#4761,#4769,#4771,.T.); +#4769 = VERTEX_POINT('',#4770); +#4770 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4771 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4772,#4773),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4772 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4773 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4774 = ORIENTED_EDGE('',*,*,#4775,.F.); +#4775 = EDGE_CURVE('',#4628,#4769,#4776,.T.); +#4776 = LINE('',#4777,#4778); +#4777 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4778 = VECTOR('',#4779,1.); +#4779 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4780 = ORIENTED_EDGE('',*,*,#4627,.F.); +#4781 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4782,#4783) + ,(#4784,#4785 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4782 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4783 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4784 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4785 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4786 = ADVANCED_FACE('',(#4787),#4810,.T.); +#4787 = FACE_BOUND('',#4788,.T.); +#4788 = EDGE_LOOP('',(#4789,#4799,#4804,#4805)); +#4789 = ORIENTED_EDGE('',*,*,#4790,.T.); +#4790 = EDGE_CURVE('',#4791,#4793,#4795,.T.); +#4791 = VERTEX_POINT('',#4792); +#4792 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#4793 = VERTEX_POINT('',#4794); +#4794 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#4795 = LINE('',#4796,#4797); +#4796 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#4797 = VECTOR('',#4798,1.); +#4798 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4799 = ORIENTED_EDGE('',*,*,#4800,.T.); +#4800 = EDGE_CURVE('',#4793,#4658,#4801,.T.); +#4801 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4802,#4803),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4802 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#4803 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#4804 = ORIENTED_EDGE('',*,*,#4657,.F.); +#4805 = ORIENTED_EDGE('',*,*,#4806,.F.); +#4806 = EDGE_CURVE('',#4791,#4650,#4807,.T.); +#4807 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4808,#4809),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4808 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#4809 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#4810 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4811,#4812) + ,(#4813,#4814 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.590518689767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#4811 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#4812 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#4813 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#4814 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#4815 = ADVANCED_FACE('',(#4816),#4864,.T.); +#4816 = FACE_BOUND('',#4817,.T.); +#4817 = EDGE_LOOP('',(#4818,#4819,#4825,#4826,#4834,#4842,#4850,#4858)); +#4818 = ORIENTED_EDGE('',*,*,#4760,.F.); +#4819 = ORIENTED_EDGE('',*,*,#4820,.T.); +#4820 = EDGE_CURVE('',#4753,#4686,#4821,.T.); +#4821 = LINE('',#4822,#4823); +#4822 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#4823 = VECTOR('',#4824,1.); +#4824 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4825 = ORIENTED_EDGE('',*,*,#4683,.F.); +#4826 = ORIENTED_EDGE('',*,*,#4827,.F.); +#4827 = EDGE_CURVE('',#4828,#4684,#4830,.T.); +#4828 = VERTEX_POINT('',#4829); +#4829 = CARTESIAN_POINT('',(-2.225259344883,-0.75,0.22)); +#4830 = LINE('',#4831,#4832); +#4831 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4832 = VECTOR('',#4833,1.); +#4833 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4834 = ORIENTED_EDGE('',*,*,#4835,.T.); +#4835 = EDGE_CURVE('',#4828,#4836,#4838,.T.); +#4836 = VERTEX_POINT('',#4837); +#4837 = CARTESIAN_POINT('',(-1.14,-0.75,0.22)); +#4838 = LINE('',#4839,#4840); +#4839 = CARTESIAN_POINT('',(0.117096097639,-0.75,0.22)); +#4840 = VECTOR('',#4841,1.); +#4841 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4842 = ORIENTED_EDGE('',*,*,#4843,.T.); +#4843 = EDGE_CURVE('',#4836,#4844,#4846,.T.); +#4844 = VERTEX_POINT('',#4845); +#4845 = CARTESIAN_POINT('',(-1.14,0.75,0.22)); +#4846 = LINE('',#4847,#4848); +#4847 = CARTESIAN_POINT('',(-1.14,-0.272629672442,0.22)); +#4848 = VECTOR('',#4849,1.); +#4849 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4850 = ORIENTED_EDGE('',*,*,#4851,.T.); +#4851 = EDGE_CURVE('',#4844,#4852,#4854,.T.); +#4852 = VERTEX_POINT('',#4853); +#4853 = CARTESIAN_POINT('',(-2.225259344883,0.75,0.22)); +#4854 = LINE('',#4855,#4856); +#4855 = CARTESIAN_POINT('',(0.117096097639,0.75,0.22)); +#4856 = VECTOR('',#4857,1.); +#4857 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4858 = ORIENTED_EDGE('',*,*,#4859,.F.); +#4859 = EDGE_CURVE('',#4761,#4852,#4860,.T.); +#4860 = LINE('',#4861,#4862); +#4861 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4862 = VECTOR('',#4863,1.); +#4863 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4864 = PLANE('',#4865); +#4865 = AXIS2_PLACEMENT_3D('',#4866,#4867,#4868); +#4866 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4867 = DIRECTION('',(0.,0.,-1.)); +#4868 = DIRECTION('',(-0.864253276514,0.503056929218,0.)); +#4869 = ADVANCED_FACE('',(#4870),#4907,.T.); +#4870 = FACE_BOUND('',#4871,.T.); +#4871 = EDGE_LOOP('',(#4872,#4873,#4874,#4884,#4891,#4899,#4900,#4901)); +#4872 = ORIENTED_EDGE('',*,*,#4768,.F.); +#4873 = ORIENTED_EDGE('',*,*,#4859,.T.); +#4874 = ORIENTED_EDGE('',*,*,#4875,.T.); +#4875 = EDGE_CURVE('',#4852,#4876,#4878,.T.); +#4876 = VERTEX_POINT('',#4877); +#4877 = CARTESIAN_POINT('',(-2.225413939802,0.75,0.2222)); +#4878 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4879,#4880,#4881,#4882,#4883), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4879 = CARTESIAN_POINT('',(-2.225259344883,0.75,0.22)); +#4880 = CARTESIAN_POINT('',(-2.238768685756,0.75,0.412247910026)); +#4881 = CARTESIAN_POINT('',(-2.25227825666,0.75,0.604499093572)); +#4882 = CARTESIAN_POINT('',(-2.265788033788,0.75,0.796753211837)); +#4883 = CARTESIAN_POINT('',(-2.279297998531,0.75,0.98901)); +#4884 = ORIENTED_EDGE('',*,*,#4885,.F.); +#4885 = EDGE_CURVE('',#4886,#4876,#4888,.T.); +#4886 = VERTEX_POINT('',#4887); +#4887 = CARTESIAN_POINT('',(-2.225413939802,-0.75,0.2222)); +#4888 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4889,#4890),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4889 = CARTESIAN_POINT('',(-2.225413939802,-0.75,0.2222)); +#4890 = CARTESIAN_POINT('',(-2.225413939802,0.75,0.2222)); +#4891 = ORIENTED_EDGE('',*,*,#4892,.F.); +#4892 = EDGE_CURVE('',#4828,#4886,#4893,.T.); +#4893 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4894,#4895,#4896,#4897,#4898), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4894 = CARTESIAN_POINT('',(-2.225259344883,-0.75,0.22)); +#4895 = CARTESIAN_POINT('',(-2.238768685756,-0.75,0.412247910026)); +#4896 = CARTESIAN_POINT('',(-2.25227825666,-0.75,0.604499093572)); +#4897 = CARTESIAN_POINT('',(-2.265788033788,-0.75,0.796753211837)); +#4898 = CARTESIAN_POINT('',(-2.279297998531,-0.75,0.98901)); +#4899 = ORIENTED_EDGE('',*,*,#4827,.T.); +#4900 = ORIENTED_EDGE('',*,*,#4709,.T.); +#4901 = ORIENTED_EDGE('',*,*,#4902,.F.); +#4902 = EDGE_CURVE('',#4769,#4702,#4903,.T.); +#4903 = LINE('',#4904,#4905); +#4904 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4905 = VECTOR('',#4906,1.); +#4906 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4907 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4908,#4909) + ,(#4910,#4911 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4908 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4909 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4910 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4911 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4912 = ADVANCED_FACE('',(#4913),#4930,.T.); +#4913 = FACE_BOUND('',#4914,.T.); +#4914 = EDGE_LOOP('',(#4915,#4923,#4924,#4925)); +#4915 = ORIENTED_EDGE('',*,*,#4916,.T.); +#4916 = EDGE_CURVE('',#4917,#4791,#4919,.T.); +#4917 = VERTEX_POINT('',#4918); +#4918 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#4919 = LINE('',#4920,#4921); +#4920 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#4921 = VECTOR('',#4922,1.); +#4922 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4923 = ORIENTED_EDGE('',*,*,#4806,.T.); +#4924 = ORIENTED_EDGE('',*,*,#4693,.F.); +#4925 = ORIENTED_EDGE('',*,*,#4926,.F.); +#4926 = EDGE_CURVE('',#4917,#4686,#4927,.T.); +#4927 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4928,#4929),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4928 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#4929 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#4930 = PLANE('',#4931); +#4931 = AXIS2_PLACEMENT_3D('',#4932,#4933,#4934); +#4932 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#4933 = DIRECTION('',(-2.214984063823E-16,-0.997540140447, + -7.009756199374E-02)); +#4934 = DIRECTION('',(1.,-2.22044604925E-16,-1.177128382009E-30)); +#4935 = ADVANCED_FACE('',(#4936),#4953,.T.); +#4936 = FACE_BOUND('',#4937,.T.); +#4937 = EDGE_LOOP('',(#4938,#4939,#4940,#4948)); +#4938 = ORIENTED_EDGE('',*,*,#4701,.T.); +#4939 = ORIENTED_EDGE('',*,*,#4738,.T.); +#4940 = ORIENTED_EDGE('',*,*,#4941,.F.); +#4941 = EDGE_CURVE('',#4942,#4731,#4944,.T.); +#4942 = VERTEX_POINT('',#4943); +#4943 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#4944 = LINE('',#4945,#4946); +#4945 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#4946 = VECTOR('',#4947,1.); +#4947 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4948 = ORIENTED_EDGE('',*,*,#4949,.F.); +#4949 = EDGE_CURVE('',#4702,#4942,#4950,.T.); +#4950 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4951,#4952),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4951 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4952 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#4953 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4954,#4955) + ,(#4956,#4957 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4954 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4955 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#4956 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4957 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4958 = ADVANCED_FACE('',(#4959),#4976,.T.); +#4959 = FACE_BOUND('',#4960,.T.); +#4960 = EDGE_LOOP('',(#4961,#4962,#4969,#4975)); +#4961 = ORIENTED_EDGE('',*,*,#4775,.T.); +#4962 = ORIENTED_EDGE('',*,*,#4963,.T.); +#4963 = EDGE_CURVE('',#4769,#4964,#4966,.T.); +#4964 = VERTEX_POINT('',#4965); +#4965 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#4966 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4967,#4968),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4967 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4968 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#4969 = ORIENTED_EDGE('',*,*,#4970,.F.); +#4970 = EDGE_CURVE('',#4724,#4964,#4971,.T.); +#4971 = LINE('',#4972,#4973); +#4972 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#4973 = VECTOR('',#4974,1.); +#4974 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4975 = ORIENTED_EDGE('',*,*,#4723,.F.); +#4976 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4977,#4978) + ,(#4979,#4980 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4977 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4978 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#4979 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4980 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#4981 = ADVANCED_FACE('',(#4982,#4993),#5027,.F.); +#4982 = FACE_BOUND('',#4983,.F.); +#4983 = EDGE_LOOP('',(#4984,#4985,#4986,#4992)); +#4984 = ORIENTED_EDGE('',*,*,#4730,.F.); +#4985 = ORIENTED_EDGE('',*,*,#4941,.F.); +#4986 = ORIENTED_EDGE('',*,*,#4987,.F.); +#4987 = EDGE_CURVE('',#4964,#4942,#4988,.T.); +#4988 = LINE('',#4989,#4990); +#4989 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#4990 = VECTOR('',#4991,1.); +#4991 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4992 = ORIENTED_EDGE('',*,*,#4970,.F.); +#4993 = FACE_BOUND('',#4994,.F.); +#4994 = EDGE_LOOP('',(#4995,#5005,#5013,#5021)); +#4995 = ORIENTED_EDGE('',*,*,#4996,.T.); +#4996 = EDGE_CURVE('',#4997,#4999,#5001,.T.); +#4997 = VERTEX_POINT('',#4998); +#4998 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#4999 = VERTEX_POINT('',#5000); +#5000 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5001 = LINE('',#5002,#5003); +#5002 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5003 = VECTOR('',#5004,1.); +#5004 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5005 = ORIENTED_EDGE('',*,*,#5006,.T.); +#5006 = EDGE_CURVE('',#4999,#5007,#5009,.T.); +#5007 = VERTEX_POINT('',#5008); +#5008 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5009 = LINE('',#5010,#5011); +#5010 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5011 = VECTOR('',#5012,1.); +#5012 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5013 = ORIENTED_EDGE('',*,*,#5014,.T.); +#5014 = EDGE_CURVE('',#5007,#5015,#5017,.T.); +#5015 = VERTEX_POINT('',#5016); +#5016 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5017 = LINE('',#5018,#5019); +#5018 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5019 = VECTOR('',#5020,1.); +#5020 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5021 = ORIENTED_EDGE('',*,*,#5022,.T.); +#5022 = EDGE_CURVE('',#5015,#4997,#5023,.T.); +#5023 = LINE('',#5024,#5025); +#5024 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5025 = VECTOR('',#5026,1.); +#5026 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5027 = PLANE('',#5028); +#5028 = AXIS2_PLACEMENT_3D('',#5029,#5030,#5031); +#5029 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5030 = DIRECTION('',(0.,0.,-1.)); +#5031 = DIRECTION('',(-0.866473406918,0.499223231735,0.)); +#5032 = ADVANCED_FACE('',(#5033),#5050,.T.); +#5033 = FACE_BOUND('',#5034,.T.); +#5034 = EDGE_LOOP('',(#5035,#5043,#5048,#5049)); +#5035 = ORIENTED_EDGE('',*,*,#5036,.T.); +#5036 = EDGE_CURVE('',#4793,#5037,#5039,.T.); +#5037 = VERTEX_POINT('',#5038); +#5038 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5039 = LINE('',#5040,#5041); +#5040 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5041 = VECTOR('',#5042,1.); +#5042 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5043 = ORIENTED_EDGE('',*,*,#5044,.T.); +#5044 = EDGE_CURVE('',#5037,#4753,#5045,.T.); +#5045 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5046,#5047),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5046 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5047 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5048 = ORIENTED_EDGE('',*,*,#4752,.F.); +#5049 = ORIENTED_EDGE('',*,*,#4800,.F.); +#5050 = PLANE('',#5051); +#5051 = AXIS2_PLACEMENT_3D('',#5052,#5053,#5054); +#5052 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5053 = DIRECTION('',(2.214984063823E-16,0.997540140447, + -7.009756199374E-02)); +#5054 = DIRECTION('',(-1.,2.22044604925E-16,-1.177128382009E-30)); +#5055 = ADVANCED_FACE('',(#5056),#5067,.T.); +#5056 = FACE_BOUND('',#5057,.F.); +#5057 = EDGE_LOOP('',(#5058,#5059,#5060,#5066)); +#5058 = ORIENTED_EDGE('',*,*,#4790,.T.); +#5059 = ORIENTED_EDGE('',*,*,#5036,.T.); +#5060 = ORIENTED_EDGE('',*,*,#5061,.T.); +#5061 = EDGE_CURVE('',#5037,#4917,#5062,.T.); +#5062 = LINE('',#5063,#5064); +#5063 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5064 = VECTOR('',#5065,1.); +#5065 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5066 = ORIENTED_EDGE('',*,*,#4916,.T.); +#5067 = PLANE('',#5068); +#5068 = AXIS2_PLACEMENT_3D('',#5069,#5070,#5071); +#5069 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5070 = DIRECTION('',(0.,0.,-1.)); +#5071 = DIRECTION('',(-0.651825367196,0.758369099238,0.)); +#5072 = ADVANCED_FACE('',(#5073),#5141,.T.); +#5073 = FACE_BOUND('',#5074,.T.); +#5074 = EDGE_LOOP('',(#5075,#5086,#5094,#5103,#5111,#5119,#5125,#5126, + #5127,#5135)); +#5075 = ORIENTED_EDGE('',*,*,#5076,.F.); +#5076 = EDGE_CURVE('',#5077,#5079,#5081,.T.); +#5077 = VERTEX_POINT('',#5078); +#5078 = CARTESIAN_POINT('',(-2.5,0.75,0.146666666667)); +#5079 = VERTEX_POINT('',#5080); +#5080 = CARTESIAN_POINT('',(-2.353333333333,0.75,-2.775557561563E-17)); +#5081 = CIRCLE('',#5082,0.146666666667); +#5082 = AXIS2_PLACEMENT_3D('',#5083,#5084,#5085); +#5083 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.146666666667)); +#5084 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5085 = DIRECTION('',(0.,0.,1.)); +#5086 = ORIENTED_EDGE('',*,*,#5087,.T.); +#5087 = EDGE_CURVE('',#5077,#5088,#5090,.T.); +#5088 = VERTEX_POINT('',#5089); +#5089 = CARTESIAN_POINT('',(-2.5,0.75,0.842343333333)); +#5090 = LINE('',#5091,#5092); +#5091 = CARTESIAN_POINT('',(-2.5,0.75,0.)); +#5092 = VECTOR('',#5093,1.); +#5093 = DIRECTION('',(0.,0.,1.)); +#5094 = ORIENTED_EDGE('',*,*,#5095,.T.); +#5095 = EDGE_CURVE('',#5088,#5096,#5098,.T.); +#5096 = VERTEX_POINT('',#5097); +#5097 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.98901)); +#5098 = CIRCLE('',#5099,0.146666666667); +#5099 = AXIS2_PLACEMENT_3D('',#5100,#5101,#5102); +#5100 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.842343333333)); +#5101 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#5102 = DIRECTION('',(0.,0.,1.)); +#5103 = ORIENTED_EDGE('',*,*,#5104,.T.); +#5104 = EDGE_CURVE('',#5096,#5105,#5107,.T.); +#5105 = VERTEX_POINT('',#5106); +#5106 = CARTESIAN_POINT('',(-2.28,0.75,0.98901)); +#5107 = LINE('',#5108,#5109); +#5108 = CARTESIAN_POINT('',(-2.5,0.75,0.98901)); +#5109 = VECTOR('',#5110,1.); +#5110 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5111 = ORIENTED_EDGE('',*,*,#5112,.F.); +#5112 = EDGE_CURVE('',#5113,#5105,#5115,.T.); +#5113 = VERTEX_POINT('',#5114); +#5114 = CARTESIAN_POINT('',(-2.28,0.75,0.2222)); +#5115 = LINE('',#5116,#5117); +#5116 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5117 = VECTOR('',#5118,1.); +#5118 = DIRECTION('',(0.,0.,1.)); +#5119 = ORIENTED_EDGE('',*,*,#5120,.T.); +#5120 = EDGE_CURVE('',#5113,#4876,#5121,.T.); +#5121 = LINE('',#5122,#5123); +#5122 = CARTESIAN_POINT('',(-2.28,0.75,0.2222)); +#5123 = VECTOR('',#5124,1.); +#5124 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5125 = ORIENTED_EDGE('',*,*,#4875,.F.); +#5126 = ORIENTED_EDGE('',*,*,#4851,.F.); +#5127 = ORIENTED_EDGE('',*,*,#5128,.F.); +#5128 = EDGE_CURVE('',#5129,#4844,#5131,.T.); +#5129 = VERTEX_POINT('',#5130); +#5130 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5131 = LINE('',#5132,#5133); +#5132 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5133 = VECTOR('',#5134,1.); +#5134 = DIRECTION('',(0.,0.,1.)); +#5135 = ORIENTED_EDGE('',*,*,#5136,.F.); +#5136 = EDGE_CURVE('',#5079,#5129,#5137,.T.); +#5137 = LINE('',#5138,#5139); +#5138 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5139 = VECTOR('',#5140,1.); +#5140 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5141 = PLANE('',#5142); +#5142 = AXIS2_PLACEMENT_3D('',#5143,#5144,#5145); +#5143 = CARTESIAN_POINT('',(-1.991067149606,0.75,0.303091083877)); +#5144 = DIRECTION('',(2.22044604925E-16,1.,-7.960022943413E-32)); +#5145 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5146 = ADVANCED_FACE('',(#5147),#5165,.T.); +#5147 = FACE_BOUND('',#5148,.T.); +#5148 = EDGE_LOOP('',(#5149,#5157,#5158,#5159)); +#5149 = ORIENTED_EDGE('',*,*,#5150,.F.); +#5150 = EDGE_CURVE('',#5129,#5151,#5153,.T.); +#5151 = VERTEX_POINT('',#5152); +#5152 = CARTESIAN_POINT('',(-1.14,-0.75,0.)); +#5153 = LINE('',#5154,#5155); +#5154 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5155 = VECTOR('',#5156,1.); +#5156 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5157 = ORIENTED_EDGE('',*,*,#5128,.T.); +#5158 = ORIENTED_EDGE('',*,*,#4843,.F.); +#5159 = ORIENTED_EDGE('',*,*,#5160,.F.); +#5160 = EDGE_CURVE('',#5151,#4836,#5161,.T.); +#5161 = LINE('',#5162,#5163); +#5162 = CARTESIAN_POINT('',(-1.14,-0.75,0.)); +#5163 = VECTOR('',#5164,1.); +#5164 = DIRECTION('',(0.,0.,1.)); +#5165 = PLANE('',#5166); +#5166 = AXIS2_PLACEMENT_3D('',#5167,#5168,#5169); +#5167 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5168 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5169 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5170 = ADVANCED_FACE('',(#5171),#5232,.T.); +#5171 = FACE_BOUND('',#5172,.T.); +#5172 = EDGE_LOOP('',(#5173,#5183,#5192,#5198,#5199,#5200,#5201,#5209, + #5217,#5225)); +#5173 = ORIENTED_EDGE('',*,*,#5174,.F.); +#5174 = EDGE_CURVE('',#5175,#5177,#5179,.T.); +#5175 = VERTEX_POINT('',#5176); +#5176 = CARTESIAN_POINT('',(-2.5,-0.75,0.146666666667)); +#5177 = VERTEX_POINT('',#5178); +#5178 = CARTESIAN_POINT('',(-2.5,-0.75,0.842343333333)); +#5179 = LINE('',#5180,#5181); +#5180 = CARTESIAN_POINT('',(-2.5,-0.75,0.)); +#5181 = VECTOR('',#5182,1.); +#5182 = DIRECTION('',(0.,0.,1.)); +#5183 = ORIENTED_EDGE('',*,*,#5184,.T.); +#5184 = EDGE_CURVE('',#5175,#5185,#5187,.T.); +#5185 = VERTEX_POINT('',#5186); +#5186 = CARTESIAN_POINT('',(-2.353333333333,-0.75,-2.775557561563E-17)); +#5187 = CIRCLE('',#5188,0.146666666667); +#5188 = AXIS2_PLACEMENT_3D('',#5189,#5190,#5191); +#5189 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.146666666667)); +#5190 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5191 = DIRECTION('',(0.,0.,1.)); +#5192 = ORIENTED_EDGE('',*,*,#5193,.F.); +#5193 = EDGE_CURVE('',#5151,#5185,#5194,.T.); +#5194 = LINE('',#5195,#5196); +#5195 = CARTESIAN_POINT('',(-2.28,-0.75,0.)); +#5196 = VECTOR('',#5197,1.); +#5197 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5198 = ORIENTED_EDGE('',*,*,#5160,.T.); +#5199 = ORIENTED_EDGE('',*,*,#4835,.F.); +#5200 = ORIENTED_EDGE('',*,*,#4892,.T.); +#5201 = ORIENTED_EDGE('',*,*,#5202,.T.); +#5202 = EDGE_CURVE('',#4886,#5203,#5205,.T.); +#5203 = VERTEX_POINT('',#5204); +#5204 = CARTESIAN_POINT('',(-2.28,-0.75,0.2222)); +#5205 = LINE('',#5206,#5207); +#5206 = CARTESIAN_POINT('',(-1.14,-0.75,0.2222)); +#5207 = VECTOR('',#5208,1.); +#5208 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5209 = ORIENTED_EDGE('',*,*,#5210,.T.); +#5210 = EDGE_CURVE('',#5203,#5211,#5213,.T.); +#5211 = VERTEX_POINT('',#5212); +#5212 = CARTESIAN_POINT('',(-2.28,-0.75,0.98901)); +#5213 = LINE('',#5214,#5215); +#5214 = CARTESIAN_POINT('',(-2.28,-0.75,0.)); +#5215 = VECTOR('',#5216,1.); +#5216 = DIRECTION('',(0.,0.,1.)); +#5217 = ORIENTED_EDGE('',*,*,#5218,.T.); +#5218 = EDGE_CURVE('',#5211,#5219,#5221,.T.); +#5219 = VERTEX_POINT('',#5220); +#5220 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.98901)); +#5221 = LINE('',#5222,#5223); +#5222 = CARTESIAN_POINT('',(-2.28,-0.75,0.98901)); +#5223 = VECTOR('',#5224,1.); +#5224 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5225 = ORIENTED_EDGE('',*,*,#5226,.F.); +#5226 = EDGE_CURVE('',#5177,#5219,#5227,.T.); +#5227 = CIRCLE('',#5228,0.146666666667); +#5228 = AXIS2_PLACEMENT_3D('',#5229,#5230,#5231); +#5229 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.842343333333)); +#5230 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#5231 = DIRECTION('',(0.,0.,1.)); +#5232 = PLANE('',#5233); +#5233 = AXIS2_PLACEMENT_3D('',#5234,#5235,#5236); +#5234 = CARTESIAN_POINT('',(-1.991067149606,-0.75,0.303091083877)); +#5235 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#5236 = DIRECTION('',(0.,0.,-1.)); +#5237 = ADVANCED_FACE('',(#5238),#5244,.T.); +#5238 = FACE_BOUND('',#5239,.T.); +#5239 = EDGE_LOOP('',(#5240,#5241,#5242,#5243)); +#5240 = ORIENTED_EDGE('',*,*,#5061,.T.); +#5241 = ORIENTED_EDGE('',*,*,#4926,.T.); +#5242 = ORIENTED_EDGE('',*,*,#4820,.F.); +#5243 = ORIENTED_EDGE('',*,*,#5044,.F.); +#5244 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5245,#5246) + ,(#5247,#5248 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.590518689767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5245 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5246 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5247 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5248 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5249 = ADVANCED_FACE('',(#5250),#5256,.T.); +#5250 = FACE_BOUND('',#5251,.T.); +#5251 = EDGE_LOOP('',(#5252,#5253,#5254,#5255)); +#5252 = ORIENTED_EDGE('',*,*,#4902,.T.); +#5253 = ORIENTED_EDGE('',*,*,#4949,.T.); +#5254 = ORIENTED_EDGE('',*,*,#4987,.F.); +#5255 = ORIENTED_EDGE('',*,*,#4963,.F.); +#5256 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5257,#5258) + ,(#5259,#5260 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5257 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5258 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5259 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5260 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5261 = ADVANCED_FACE('',(#5262),#5273,.F.); +#5262 = FACE_BOUND('',#5263,.F.); +#5263 = EDGE_LOOP('',(#5264,#5265,#5266,#5272)); +#5264 = ORIENTED_EDGE('',*,*,#4885,.F.); +#5265 = ORIENTED_EDGE('',*,*,#5202,.T.); +#5266 = ORIENTED_EDGE('',*,*,#5267,.T.); +#5267 = EDGE_CURVE('',#5203,#5113,#5268,.T.); +#5268 = LINE('',#5269,#5270); +#5269 = CARTESIAN_POINT('',(-2.28,-0.75,0.2222)); +#5270 = VECTOR('',#5271,1.); +#5271 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5272 = ORIENTED_EDGE('',*,*,#5120,.T.); +#5273 = PLANE('',#5274); +#5274 = AXIS2_PLACEMENT_3D('',#5275,#5276,#5277); +#5275 = CARTESIAN_POINT('',(-1.71,4.440892098501E-16,0.2222)); +#5276 = DIRECTION('',(0.,-0.,-1.)); +#5277 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5278 = ADVANCED_FACE('',(#5279),#5302,.F.); +#5279 = FACE_BOUND('',#5280,.F.); +#5280 = EDGE_LOOP('',(#5281,#5291,#5296,#5297)); +#5281 = ORIENTED_EDGE('',*,*,#5282,.T.); +#5282 = EDGE_CURVE('',#5283,#5285,#5287,.T.); +#5283 = VERTEX_POINT('',#5284); +#5284 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5285 = VERTEX_POINT('',#5286); +#5286 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5287 = LINE('',#5288,#5289); +#5288 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5289 = VECTOR('',#5290,1.); +#5290 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5291 = ORIENTED_EDGE('',*,*,#5292,.T.); +#5292 = EDGE_CURVE('',#5285,#4999,#5293,.T.); +#5293 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5294,#5295),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5294 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5295 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5296 = ORIENTED_EDGE('',*,*,#4996,.F.); +#5297 = ORIENTED_EDGE('',*,*,#5298,.F.); +#5298 = EDGE_CURVE('',#5283,#4997,#5299,.T.); +#5299 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5300,#5301),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5300 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5301 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5302 = PLANE('',#5303); +#5303 = AXIS2_PLACEMENT_3D('',#5304,#5305,#5306); +#5304 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5305 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5306 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5307 = ADVANCED_FACE('',(#5308),#5325,.F.); +#5308 = FACE_BOUND('',#5309,.F.); +#5309 = EDGE_LOOP('',(#5310,#5318,#5319,#5320)); +#5310 = ORIENTED_EDGE('',*,*,#5311,.T.); +#5311 = EDGE_CURVE('',#5312,#5283,#5314,.T.); +#5312 = VERTEX_POINT('',#5313); +#5313 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5314 = LINE('',#5315,#5316); +#5315 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5316 = VECTOR('',#5317,1.); +#5317 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5318 = ORIENTED_EDGE('',*,*,#5298,.T.); +#5319 = ORIENTED_EDGE('',*,*,#5022,.F.); +#5320 = ORIENTED_EDGE('',*,*,#5321,.F.); +#5321 = EDGE_CURVE('',#5312,#5015,#5322,.T.); +#5322 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5323,#5324),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5323 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5324 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5325 = PLANE('',#5326); +#5326 = AXIS2_PLACEMENT_3D('',#5327,#5328,#5329); +#5327 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5328 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5329 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5330 = ADVANCED_FACE('',(#5331),#5348,.F.); +#5331 = FACE_BOUND('',#5332,.F.); +#5332 = EDGE_LOOP('',(#5333,#5341,#5342,#5343)); +#5333 = ORIENTED_EDGE('',*,*,#5334,.T.); +#5334 = EDGE_CURVE('',#5335,#5312,#5337,.T.); +#5335 = VERTEX_POINT('',#5336); +#5336 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#5337 = LINE('',#5338,#5339); +#5338 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#5339 = VECTOR('',#5340,1.); +#5340 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5341 = ORIENTED_EDGE('',*,*,#5321,.T.); +#5342 = ORIENTED_EDGE('',*,*,#5014,.F.); +#5343 = ORIENTED_EDGE('',*,*,#5344,.F.); +#5344 = EDGE_CURVE('',#5335,#5007,#5345,.T.); +#5345 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5346,#5347),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5346 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#5347 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5348 = PLANE('',#5349); +#5349 = AXIS2_PLACEMENT_3D('',#5350,#5351,#5352); +#5350 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5351 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5352 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5353 = ADVANCED_FACE('',(#5354),#5365,.F.); +#5354 = FACE_BOUND('',#5355,.F.); +#5355 = EDGE_LOOP('',(#5356,#5362,#5363,#5364)); +#5356 = ORIENTED_EDGE('',*,*,#5357,.T.); +#5357 = EDGE_CURVE('',#5285,#5335,#5358,.T.); +#5358 = LINE('',#5359,#5360); +#5359 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5360 = VECTOR('',#5361,1.); +#5361 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5362 = ORIENTED_EDGE('',*,*,#5344,.T.); +#5363 = ORIENTED_EDGE('',*,*,#5006,.F.); +#5364 = ORIENTED_EDGE('',*,*,#5292,.F.); +#5365 = PLANE('',#5366); +#5366 = AXIS2_PLACEMENT_3D('',#5367,#5368,#5369); +#5367 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5368 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5369 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5370 = ADVANCED_FACE('',(#5371),#5387,.T.); +#5371 = FACE_BOUND('',#5372,.T.); +#5372 = EDGE_LOOP('',(#5373,#5379,#5380,#5386)); +#5373 = ORIENTED_EDGE('',*,*,#5374,.T.); +#5374 = EDGE_CURVE('',#5175,#5077,#5375,.T.); +#5375 = LINE('',#5376,#5377); +#5376 = CARTESIAN_POINT('',(-2.5,-0.75,0.146666666667)); +#5377 = VECTOR('',#5378,1.); +#5378 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5379 = ORIENTED_EDGE('',*,*,#5076,.T.); +#5380 = ORIENTED_EDGE('',*,*,#5381,.F.); +#5381 = EDGE_CURVE('',#5185,#5079,#5382,.T.); +#5382 = LINE('',#5383,#5384); +#5383 = CARTESIAN_POINT('',(-2.353333333333,-0.75,-2.775557561563E-17)); +#5384 = VECTOR('',#5385,1.); +#5385 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5386 = ORIENTED_EDGE('',*,*,#5184,.F.); +#5387 = CYLINDRICAL_SURFACE('',#5388,0.146666666667); +#5388 = AXIS2_PLACEMENT_3D('',#5389,#5390,#5391); +#5389 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.146666666667)); +#5390 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5391 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5392 = ADVANCED_FACE('',(#5393),#5399,.T.); +#5393 = FACE_BOUND('',#5394,.T.); +#5394 = EDGE_LOOP('',(#5395,#5396,#5397,#5398)); +#5395 = ORIENTED_EDGE('',*,*,#5193,.T.); +#5396 = ORIENTED_EDGE('',*,*,#5381,.T.); +#5397 = ORIENTED_EDGE('',*,*,#5136,.T.); +#5398 = ORIENTED_EDGE('',*,*,#5150,.T.); +#5399 = PLANE('',#5400); +#5400 = AXIS2_PLACEMENT_3D('',#5401,#5402,#5403); +#5401 = CARTESIAN_POINT('',(-1.746666666667,3.878379099357E-16, + -7.671995716851E-18)); +#5402 = DIRECTION('',(1.332277103521E-17,-2.579688262589E-33,-1.)); +#5403 = DIRECTION('',(1.,-2.22044604925E-16,1.332277103521E-17)); +#5404 = ADVANCED_FACE('',(#5405),#5416,.T.); +#5405 = FACE_BOUND('',#5406,.T.); +#5406 = EDGE_LOOP('',(#5407,#5408,#5409,#5415)); +#5407 = ORIENTED_EDGE('',*,*,#5267,.T.); +#5408 = ORIENTED_EDGE('',*,*,#5112,.T.); +#5409 = ORIENTED_EDGE('',*,*,#5410,.T.); +#5410 = EDGE_CURVE('',#5105,#5211,#5411,.T.); +#5411 = LINE('',#5412,#5413); +#5412 = CARTESIAN_POINT('',(-2.28,0.75,0.98901)); +#5413 = VECTOR('',#5414,1.); +#5414 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5415 = ORIENTED_EDGE('',*,*,#5210,.F.); +#5416 = PLANE('',#5417); +#5417 = AXIS2_PLACEMENT_3D('',#5418,#5419,#5420); +#5418 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5419 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5420 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5421 = ADVANCED_FACE('',(#5422),#5433,.F.); +#5422 = FACE_BOUND('',#5423,.F.); +#5423 = EDGE_LOOP('',(#5424,#5425,#5431,#5432)); +#5424 = ORIENTED_EDGE('',*,*,#5218,.T.); +#5425 = ORIENTED_EDGE('',*,*,#5426,.T.); +#5426 = EDGE_CURVE('',#5219,#5096,#5427,.T.); +#5427 = LINE('',#5428,#5429); +#5428 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.98901)); +#5429 = VECTOR('',#5430,1.); +#5430 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5431 = ORIENTED_EDGE('',*,*,#5104,.T.); +#5432 = ORIENTED_EDGE('',*,*,#5410,.T.); +#5433 = PLANE('',#5434); +#5434 = AXIS2_PLACEMENT_3D('',#5435,#5436,#5437); +#5435 = CARTESIAN_POINT('',(-2.39,4.440892098501E-16,0.98901)); +#5436 = DIRECTION('',(0.,-0.,-1.)); +#5437 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5438 = ADVANCED_FACE('',(#5439),#5450,.T.); +#5439 = FACE_BOUND('',#5440,.T.); +#5440 = EDGE_LOOP('',(#5441,#5442,#5443,#5444)); +#5441 = ORIENTED_EDGE('',*,*,#5226,.T.); +#5442 = ORIENTED_EDGE('',*,*,#5426,.T.); +#5443 = ORIENTED_EDGE('',*,*,#5095,.F.); +#5444 = ORIENTED_EDGE('',*,*,#5445,.F.); +#5445 = EDGE_CURVE('',#5177,#5088,#5446,.T.); +#5446 = LINE('',#5447,#5448); +#5447 = CARTESIAN_POINT('',(-2.5,-0.75,0.842343333333)); +#5448 = VECTOR('',#5449,1.); +#5449 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5450 = CYLINDRICAL_SURFACE('',#5451,0.146666666667); +#5451 = AXIS2_PLACEMENT_3D('',#5452,#5453,#5454); +#5452 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.842343333333)); +#5453 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5454 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5455 = ADVANCED_FACE('',(#5456),#5462,.T.); +#5456 = FACE_BOUND('',#5457,.T.); +#5457 = EDGE_LOOP('',(#5458,#5459,#5460,#5461)); +#5458 = ORIENTED_EDGE('',*,*,#5174,.T.); +#5459 = ORIENTED_EDGE('',*,*,#5445,.T.); +#5460 = ORIENTED_EDGE('',*,*,#5087,.F.); +#5461 = ORIENTED_EDGE('',*,*,#5374,.F.); +#5462 = PLANE('',#5463); +#5463 = AXIS2_PLACEMENT_3D('',#5464,#5465,#5466); +#5464 = CARTESIAN_POINT('',(-2.5,-0.75,0.)); +#5465 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5466 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5467 = ADVANCED_FACE('',(#5468),#5474,.F.); +#5468 = FACE_BOUND('',#5469,.T.); +#5469 = EDGE_LOOP('',(#5470,#5471,#5472,#5473)); +#5470 = ORIENTED_EDGE('',*,*,#5311,.T.); +#5471 = ORIENTED_EDGE('',*,*,#5282,.T.); +#5472 = ORIENTED_EDGE('',*,*,#5357,.T.); +#5473 = ORIENTED_EDGE('',*,*,#5334,.T.); +#5474 = PLANE('',#5475); +#5475 = AXIS2_PLACEMENT_3D('',#5476,#5477,#5478); +#5476 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5477 = DIRECTION('',(0.,0.,-1.)); +#5478 = DIRECTION('',(-0.246713052972,0.969088576701,0.)); +#5479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#5483)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#5480,#5481,#5482)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#5480 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#5481 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#5482 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#5483 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#5480, + 'distance_accuracy_value','confusion accuracy'); +#5484 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#5485,#5487); +#5485 = ( REPRESENTATION_RELATIONSHIP('','',#4270,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#5486) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#5486 = ITEM_DEFINED_TRANSFORMATION('','',#11,#67); +#5487 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #5488); +#5488 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('14','D1','',#5,#4265,$); +#5489 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#4267)); +#5490 = SHAPE_DEFINITION_REPRESENTATION(#5491,#5497); +#5491 = PRODUCT_DEFINITION_SHAPE('','',#5492); +#5492 = PRODUCT_DEFINITION('design','',#5493,#5496); +#5493 = PRODUCT_DEFINITION_FORMATION('','',#5494); +#5494 = PRODUCT('D_SOD-123','D_SOD-123','',(#5495)); +#5495 = PRODUCT_CONTEXT('',#2,'mechanical'); +#5496 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#5497 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#5498),#7186); +#5498 = MANIFOLD_SOLID_BREP('',#5499); +#5499 = CLOSED_SHELL('',(#5500,#5554,#5617,#5640,#5670,#5703,#5733,#5756 + ,#5779,#5802,#5825,#5848,#5881,#5904,#5927,#6015,#6090,#6114,#6182, + #6270,#6286,#6302,#6318,#6334,#6351,#6384,#6401,#6423,#6454,#6477, + #6500,#6523,#6553,#6570,#6587,#6604,#6621,#6638,#6655,#6672,#6684, + #6707,#6730,#6747,#6822,#6846,#6914,#6931,#6981,#6998,#7015,#7032, + #7049,#7066,#7078,#7109,#7133,#7157,#7174)); +#5500 = ADVANCED_FACE('',(#5501),#5549,.F.); +#5501 = FACE_BOUND('',#5502,.F.); +#5502 = EDGE_LOOP('',(#5503,#5513,#5520,#5528,#5536,#5544)); +#5503 = ORIENTED_EDGE('',*,*,#5504,.T.); +#5504 = EDGE_CURVE('',#5505,#5507,#5509,.T.); +#5505 = VERTEX_POINT('',#5506); +#5506 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5507 = VERTEX_POINT('',#5508); +#5508 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5509 = LINE('',#5510,#5511); +#5510 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5511 = VECTOR('',#5512,1.); +#5512 = DIRECTION('',(0.,1.,0.)); +#5513 = ORIENTED_EDGE('',*,*,#5514,.T.); +#5514 = EDGE_CURVE('',#5507,#5515,#5517,.T.); +#5515 = VERTEX_POINT('',#5516); +#5516 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5517 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5518,#5519),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5518 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5519 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5520 = ORIENTED_EDGE('',*,*,#5521,.F.); +#5521 = EDGE_CURVE('',#5522,#5515,#5524,.T.); +#5522 = VERTEX_POINT('',#5523); +#5523 = CARTESIAN_POINT('',(-1.375,0.325,0.575)); +#5524 = LINE('',#5525,#5526); +#5525 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5526 = VECTOR('',#5527,1.); +#5527 = DIRECTION('',(0.,1.,0.)); +#5528 = ORIENTED_EDGE('',*,*,#5529,.F.); +#5529 = EDGE_CURVE('',#5530,#5522,#5532,.T.); +#5530 = VERTEX_POINT('',#5531); +#5531 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#5532 = LINE('',#5533,#5534); +#5533 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#5534 = VECTOR('',#5535,1.); +#5535 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5536 = ORIENTED_EDGE('',*,*,#5537,.F.); +#5537 = EDGE_CURVE('',#5538,#5530,#5540,.T.); +#5538 = VERTEX_POINT('',#5539); +#5539 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5540 = LINE('',#5541,#5542); +#5541 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5542 = VECTOR('',#5543,1.); +#5543 = DIRECTION('',(0.,1.,0.)); +#5544 = ORIENTED_EDGE('',*,*,#5545,.F.); +#5545 = EDGE_CURVE('',#5505,#5538,#5546,.T.); +#5546 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5547,#5548),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5547 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5548 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5549 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5550,#5551) + ,(#5552,#5553 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5550 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5551 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5552 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5553 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5554 = ADVANCED_FACE('',(#5555),#5612,.F.); +#5555 = FACE_BOUND('',#5556,.T.); +#5556 = EDGE_LOOP('',(#5557,#5558,#5566,#5574,#5582,#5590,#5598,#5606)); +#5557 = ORIENTED_EDGE('',*,*,#5504,.T.); +#5558 = ORIENTED_EDGE('',*,*,#5559,.T.); +#5559 = EDGE_CURVE('',#5507,#5560,#5562,.T.); +#5560 = VERTEX_POINT('',#5561); +#5561 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5562 = LINE('',#5563,#5564); +#5563 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5564 = VECTOR('',#5565,1.); +#5565 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5566 = ORIENTED_EDGE('',*,*,#5567,.T.); +#5567 = EDGE_CURVE('',#5560,#5568,#5570,.T.); +#5568 = VERTEX_POINT('',#5569); +#5569 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5570 = LINE('',#5571,#5572); +#5571 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5572 = VECTOR('',#5573,1.); +#5573 = DIRECTION('',(1.,0.,0.)); +#5574 = ORIENTED_EDGE('',*,*,#5575,.T.); +#5575 = EDGE_CURVE('',#5568,#5576,#5578,.T.); +#5576 = VERTEX_POINT('',#5577); +#5577 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5578 = LINE('',#5579,#5580); +#5579 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5580 = VECTOR('',#5581,1.); +#5581 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#5582 = ORIENTED_EDGE('',*,*,#5583,.T.); +#5583 = EDGE_CURVE('',#5576,#5584,#5586,.T.); +#5584 = VERTEX_POINT('',#5585); +#5585 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5586 = LINE('',#5587,#5588); +#5587 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5588 = VECTOR('',#5589,1.); +#5589 = DIRECTION('',(0.,-1.,0.)); +#5590 = ORIENTED_EDGE('',*,*,#5591,.T.); +#5591 = EDGE_CURVE('',#5584,#5592,#5594,.T.); +#5592 = VERTEX_POINT('',#5593); +#5593 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5594 = LINE('',#5595,#5596); +#5595 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5596 = VECTOR('',#5597,1.); +#5597 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#5598 = ORIENTED_EDGE('',*,*,#5599,.T.); +#5599 = EDGE_CURVE('',#5592,#5600,#5602,.T.); +#5600 = VERTEX_POINT('',#5601); +#5601 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5602 = LINE('',#5603,#5604); +#5603 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5604 = VECTOR('',#5605,1.); +#5605 = DIRECTION('',(-1.,0.,0.)); +#5606 = ORIENTED_EDGE('',*,*,#5607,.T.); +#5607 = EDGE_CURVE('',#5600,#5505,#5608,.T.); +#5608 = LINE('',#5609,#5610); +#5609 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5610 = VECTOR('',#5611,1.); +#5611 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5612 = PLANE('',#5613); +#5613 = AXIS2_PLACEMENT_3D('',#5614,#5615,#5616); +#5614 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5615 = DIRECTION('',(0.,0.,1.)); +#5616 = DIRECTION('',(0.889616464678,0.456708381546,-0.)); +#5617 = ADVANCED_FACE('',(#5618),#5635,.F.); +#5618 = FACE_BOUND('',#5619,.F.); +#5619 = EDGE_LOOP('',(#5620,#5621,#5628,#5634)); +#5620 = ORIENTED_EDGE('',*,*,#5559,.T.); +#5621 = ORIENTED_EDGE('',*,*,#5622,.T.); +#5622 = EDGE_CURVE('',#5560,#5623,#5625,.T.); +#5623 = VERTEX_POINT('',#5624); +#5624 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5625 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5626,#5627),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5626 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5627 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5628 = ORIENTED_EDGE('',*,*,#5629,.F.); +#5629 = EDGE_CURVE('',#5515,#5623,#5630,.T.); +#5630 = LINE('',#5631,#5632); +#5631 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5632 = VECTOR('',#5633,1.); +#5633 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5634 = ORIENTED_EDGE('',*,*,#5514,.F.); +#5635 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5636,#5637) + ,(#5638,#5639 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5636 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5637 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5638 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5639 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5640 = ADVANCED_FACE('',(#5641),#5665,.F.); +#5641 = FACE_BOUND('',#5642,.F.); +#5642 = EDGE_LOOP('',(#5643,#5650,#5651,#5659)); +#5643 = ORIENTED_EDGE('',*,*,#5644,.F.); +#5644 = EDGE_CURVE('',#5538,#5645,#5647,.T.); +#5645 = VERTEX_POINT('',#5646); +#5646 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5647 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5648,#5649),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5648 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5649 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5650 = ORIENTED_EDGE('',*,*,#5537,.T.); +#5651 = ORIENTED_EDGE('',*,*,#5652,.T.); +#5652 = EDGE_CURVE('',#5530,#5653,#5655,.T.); +#5653 = VERTEX_POINT('',#5654); +#5654 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#5655 = LINE('',#5656,#5657); +#5656 = CARTESIAN_POINT('',(-1.375,-0.325,0.579830288983)); +#5657 = VECTOR('',#5658,1.); +#5658 = DIRECTION('',(0.,0.,1.)); +#5659 = ORIENTED_EDGE('',*,*,#5660,.F.); +#5660 = EDGE_CURVE('',#5645,#5653,#5661,.T.); +#5661 = LINE('',#5662,#5663); +#5662 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5663 = VECTOR('',#5664,1.); +#5664 = DIRECTION('',(0.,1.,0.)); +#5665 = PLANE('',#5666); +#5666 = AXIS2_PLACEMENT_3D('',#5667,#5668,#5669); +#5667 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5668 = DIRECTION('',(1.,0.,0.)); +#5669 = DIRECTION('',(-0.,1.,0.)); +#5670 = ADVANCED_FACE('',(#5671),#5698,.F.); +#5671 = FACE_BOUND('',#5672,.F.); +#5672 = EDGE_LOOP('',(#5673,#5674,#5683,#5691)); +#5673 = ORIENTED_EDGE('',*,*,#5529,.T.); +#5674 = ORIENTED_EDGE('',*,*,#5675,.T.); +#5675 = EDGE_CURVE('',#5522,#5676,#5678,.T.); +#5676 = VERTEX_POINT('',#5677); +#5677 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#5678 = CIRCLE('',#5679,0.12); +#5679 = AXIS2_PLACEMENT_3D('',#5680,#5681,#5682); +#5680 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#5681 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5682 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#5683 = ORIENTED_EDGE('',*,*,#5684,.F.); +#5684 = EDGE_CURVE('',#5685,#5676,#5687,.T.); +#5685 = VERTEX_POINT('',#5686); +#5686 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#5687 = LINE('',#5688,#5689); +#5688 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#5689 = VECTOR('',#5690,1.); +#5690 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5691 = ORIENTED_EDGE('',*,*,#5692,.F.); +#5692 = EDGE_CURVE('',#5530,#5685,#5693,.T.); +#5693 = CIRCLE('',#5694,0.12); +#5694 = AXIS2_PLACEMENT_3D('',#5695,#5696,#5697); +#5695 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#5696 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5697 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#5698 = CYLINDRICAL_SURFACE('',#5699,0.12); +#5699 = AXIS2_PLACEMENT_3D('',#5700,#5701,#5702); +#5700 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#5701 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5702 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#5703 = ADVANCED_FACE('',(#5704),#5728,.F.); +#5704 = FACE_BOUND('',#5705,.F.); +#5705 = EDGE_LOOP('',(#5706,#5714,#5715,#5722)); +#5706 = ORIENTED_EDGE('',*,*,#5707,.F.); +#5707 = EDGE_CURVE('',#5522,#5708,#5710,.T.); +#5708 = VERTEX_POINT('',#5709); +#5709 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#5710 = LINE('',#5711,#5712); +#5711 = CARTESIAN_POINT('',(-1.375,0.325,0.579830288983)); +#5712 = VECTOR('',#5713,1.); +#5713 = DIRECTION('',(0.,0.,1.)); +#5714 = ORIENTED_EDGE('',*,*,#5521,.T.); +#5715 = ORIENTED_EDGE('',*,*,#5716,.T.); +#5716 = EDGE_CURVE('',#5515,#5717,#5719,.T.); +#5717 = VERTEX_POINT('',#5718); +#5718 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#5719 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5720,#5721),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5720 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5721 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#5722 = ORIENTED_EDGE('',*,*,#5723,.F.); +#5723 = EDGE_CURVE('',#5708,#5717,#5724,.T.); +#5724 = LINE('',#5725,#5726); +#5725 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5726 = VECTOR('',#5727,1.); +#5727 = DIRECTION('',(0.,1.,0.)); +#5728 = PLANE('',#5729); +#5729 = AXIS2_PLACEMENT_3D('',#5730,#5731,#5732); +#5730 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5731 = DIRECTION('',(1.,0.,0.)); +#5732 = DIRECTION('',(-0.,1.,0.)); +#5733 = ADVANCED_FACE('',(#5734),#5751,.F.); +#5734 = FACE_BOUND('',#5735,.F.); +#5735 = EDGE_LOOP('',(#5736,#5737,#5738,#5746)); +#5736 = ORIENTED_EDGE('',*,*,#5607,.T.); +#5737 = ORIENTED_EDGE('',*,*,#5545,.T.); +#5738 = ORIENTED_EDGE('',*,*,#5739,.F.); +#5739 = EDGE_CURVE('',#5740,#5538,#5742,.T.); +#5740 = VERTEX_POINT('',#5741); +#5741 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5742 = LINE('',#5743,#5744); +#5743 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5744 = VECTOR('',#5745,1.); +#5745 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5746 = ORIENTED_EDGE('',*,*,#5747,.F.); +#5747 = EDGE_CURVE('',#5600,#5740,#5748,.T.); +#5748 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5749,#5750),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5749 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5750 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5751 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5752,#5753) + ,(#5754,#5755 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5752 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5753 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5754 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5755 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5756 = ADVANCED_FACE('',(#5757),#5774,.F.); +#5757 = FACE_BOUND('',#5758,.F.); +#5758 = EDGE_LOOP('',(#5759,#5760,#5761,#5769)); +#5759 = ORIENTED_EDGE('',*,*,#5599,.T.); +#5760 = ORIENTED_EDGE('',*,*,#5747,.T.); +#5761 = ORIENTED_EDGE('',*,*,#5762,.F.); +#5762 = EDGE_CURVE('',#5763,#5740,#5765,.T.); +#5763 = VERTEX_POINT('',#5764); +#5764 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5765 = LINE('',#5766,#5767); +#5766 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5767 = VECTOR('',#5768,1.); +#5768 = DIRECTION('',(-1.,0.,0.)); +#5769 = ORIENTED_EDGE('',*,*,#5770,.F.); +#5770 = EDGE_CURVE('',#5592,#5763,#5771,.T.); +#5771 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5772,#5773),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5772 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5773 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5774 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5775,#5776) + ,(#5777,#5778 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5775 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5776 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5777 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5778 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5779 = ADVANCED_FACE('',(#5780),#5797,.F.); +#5780 = FACE_BOUND('',#5781,.F.); +#5781 = EDGE_LOOP('',(#5782,#5783,#5790,#5796)); +#5782 = ORIENTED_EDGE('',*,*,#5567,.T.); +#5783 = ORIENTED_EDGE('',*,*,#5784,.T.); +#5784 = EDGE_CURVE('',#5568,#5785,#5787,.T.); +#5785 = VERTEX_POINT('',#5786); +#5786 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5787 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5788,#5789),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5788 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5789 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5790 = ORIENTED_EDGE('',*,*,#5791,.F.); +#5791 = EDGE_CURVE('',#5623,#5785,#5792,.T.); +#5792 = LINE('',#5793,#5794); +#5793 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5794 = VECTOR('',#5795,1.); +#5795 = DIRECTION('',(1.,0.,0.)); +#5796 = ORIENTED_EDGE('',*,*,#5622,.F.); +#5797 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5798,#5799) + ,(#5800,#5801 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5798 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5799 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5800 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5801 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5802 = ADVANCED_FACE('',(#5803),#5820,.F.); +#5803 = FACE_BOUND('',#5804,.F.); +#5804 = EDGE_LOOP('',(#5805,#5806,#5807,#5815)); +#5805 = ORIENTED_EDGE('',*,*,#5591,.T.); +#5806 = ORIENTED_EDGE('',*,*,#5770,.T.); +#5807 = ORIENTED_EDGE('',*,*,#5808,.F.); +#5808 = EDGE_CURVE('',#5809,#5763,#5811,.T.); +#5809 = VERTEX_POINT('',#5810); +#5810 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5811 = LINE('',#5812,#5813); +#5812 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5813 = VECTOR('',#5814,1.); +#5814 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#5815 = ORIENTED_EDGE('',*,*,#5816,.F.); +#5816 = EDGE_CURVE('',#5584,#5809,#5817,.T.); +#5817 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5818,#5819),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5818 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5819 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5820 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5821,#5822) + ,(#5823,#5824 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5821 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5822 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5823 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5824 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5825 = ADVANCED_FACE('',(#5826),#5843,.F.); +#5826 = FACE_BOUND('',#5827,.F.); +#5827 = EDGE_LOOP('',(#5828,#5829,#5836,#5842)); +#5828 = ORIENTED_EDGE('',*,*,#5575,.T.); +#5829 = ORIENTED_EDGE('',*,*,#5830,.T.); +#5830 = EDGE_CURVE('',#5576,#5831,#5833,.T.); +#5831 = VERTEX_POINT('',#5832); +#5832 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5833 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5834,#5835),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5834 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5835 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5836 = ORIENTED_EDGE('',*,*,#5837,.F.); +#5837 = EDGE_CURVE('',#5785,#5831,#5838,.T.); +#5838 = LINE('',#5839,#5840); +#5839 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5840 = VECTOR('',#5841,1.); +#5841 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#5842 = ORIENTED_EDGE('',*,*,#5784,.F.); +#5843 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5844,#5845) + ,(#5846,#5847 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5844 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5845 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5846 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5847 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5848 = ADVANCED_FACE('',(#5849),#5876,.F.); +#5849 = FACE_BOUND('',#5850,.F.); +#5850 = EDGE_LOOP('',(#5851,#5852,#5853,#5861,#5869,#5875)); +#5851 = ORIENTED_EDGE('',*,*,#5583,.T.); +#5852 = ORIENTED_EDGE('',*,*,#5816,.T.); +#5853 = ORIENTED_EDGE('',*,*,#5854,.F.); +#5854 = EDGE_CURVE('',#5855,#5809,#5857,.T.); +#5855 = VERTEX_POINT('',#5856); +#5856 = CARTESIAN_POINT('',(1.375,-0.325,0.575)); +#5857 = LINE('',#5858,#5859); +#5858 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5859 = VECTOR('',#5860,1.); +#5860 = DIRECTION('',(0.,-1.,0.)); +#5861 = ORIENTED_EDGE('',*,*,#5862,.F.); +#5862 = EDGE_CURVE('',#5863,#5855,#5865,.T.); +#5863 = VERTEX_POINT('',#5864); +#5864 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#5865 = LINE('',#5866,#5867); +#5866 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#5867 = VECTOR('',#5868,1.); +#5868 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5869 = ORIENTED_EDGE('',*,*,#5870,.F.); +#5870 = EDGE_CURVE('',#5831,#5863,#5871,.T.); +#5871 = LINE('',#5872,#5873); +#5872 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5873 = VECTOR('',#5874,1.); +#5874 = DIRECTION('',(0.,-1.,0.)); +#5875 = ORIENTED_EDGE('',*,*,#5830,.F.); +#5876 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5877,#5878) + ,(#5879,#5880 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5877 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5878 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5879 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5880 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5881 = ADVANCED_FACE('',(#5882),#5899,.F.); +#5882 = FACE_BOUND('',#5883,.F.); +#5883 = EDGE_LOOP('',(#5884,#5885,#5892,#5898)); +#5884 = ORIENTED_EDGE('',*,*,#5629,.T.); +#5885 = ORIENTED_EDGE('',*,*,#5886,.T.); +#5886 = EDGE_CURVE('',#5623,#5887,#5889,.T.); +#5887 = VERTEX_POINT('',#5888); +#5888 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#5889 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5890,#5891),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5890 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5891 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#5892 = ORIENTED_EDGE('',*,*,#5893,.F.); +#5893 = EDGE_CURVE('',#5717,#5887,#5894,.T.); +#5894 = LINE('',#5895,#5896); +#5895 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#5896 = VECTOR('',#5897,1.); +#5897 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5898 = ORIENTED_EDGE('',*,*,#5716,.F.); +#5899 = PLANE('',#5900); +#5900 = AXIS2_PLACEMENT_3D('',#5901,#5902,#5903); +#5901 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#5902 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#5903 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5904 = ADVANCED_FACE('',(#5905),#5922,.F.); +#5905 = FACE_BOUND('',#5906,.F.); +#5906 = EDGE_LOOP('',(#5907,#5908,#5909,#5917)); +#5907 = ORIENTED_EDGE('',*,*,#5739,.T.); +#5908 = ORIENTED_EDGE('',*,*,#5644,.T.); +#5909 = ORIENTED_EDGE('',*,*,#5910,.F.); +#5910 = EDGE_CURVE('',#5911,#5645,#5913,.T.); +#5911 = VERTEX_POINT('',#5912); +#5912 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#5913 = LINE('',#5914,#5915); +#5914 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#5915 = VECTOR('',#5916,1.); +#5916 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5917 = ORIENTED_EDGE('',*,*,#5918,.F.); +#5918 = EDGE_CURVE('',#5740,#5911,#5919,.T.); +#5919 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5920,#5921),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5920 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5921 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#5922 = PLANE('',#5923); +#5923 = AXIS2_PLACEMENT_3D('',#5924,#5925,#5926); +#5924 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#5925 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5926 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5927 = ADVANCED_FACE('',(#5928),#6010,.F.); +#5928 = FACE_BOUND('',#5929,.F.); +#5929 = EDGE_LOOP('',(#5930,#5931,#5932,#5940,#5948,#5956,#5964,#5972, + #5980,#5988,#5996,#6004)); +#5930 = ORIENTED_EDGE('',*,*,#5910,.T.); +#5931 = ORIENTED_EDGE('',*,*,#5660,.T.); +#5932 = ORIENTED_EDGE('',*,*,#5933,.T.); +#5933 = EDGE_CURVE('',#5653,#5934,#5936,.T.); +#5934 = VERTEX_POINT('',#5935); +#5935 = CARTESIAN_POINT('',(-1.35,-0.325,0.775)); +#5936 = LINE('',#5937,#5938); +#5937 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#5938 = VECTOR('',#5939,1.); +#5939 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5940 = ORIENTED_EDGE('',*,*,#5941,.F.); +#5941 = EDGE_CURVE('',#5942,#5934,#5944,.T.); +#5942 = VERTEX_POINT('',#5943); +#5943 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#5944 = LINE('',#5945,#5946); +#5945 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#5946 = VECTOR('',#5947,1.); +#5947 = DIRECTION('',(0.,1.,0.)); +#5948 = ORIENTED_EDGE('',*,*,#5949,.F.); +#5949 = EDGE_CURVE('',#5950,#5942,#5952,.T.); +#5950 = VERTEX_POINT('',#5951); +#5951 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#5952 = LINE('',#5953,#5954); +#5953 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#5954 = VECTOR('',#5955,1.); +#5955 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5956 = ORIENTED_EDGE('',*,*,#5957,.F.); +#5957 = EDGE_CURVE('',#5958,#5950,#5960,.T.); +#5958 = VERTEX_POINT('',#5959); +#5959 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#5960 = LINE('',#5961,#5962); +#5961 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#5962 = VECTOR('',#5963,1.); +#5963 = DIRECTION('',(-1.,0.,0.)); +#5964 = ORIENTED_EDGE('',*,*,#5965,.F.); +#5965 = EDGE_CURVE('',#5966,#5958,#5968,.T.); +#5966 = VERTEX_POINT('',#5967); +#5967 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#5968 = LINE('',#5969,#5970); +#5969 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#5970 = VECTOR('',#5971,1.); +#5971 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#5972 = ORIENTED_EDGE('',*,*,#5973,.F.); +#5973 = EDGE_CURVE('',#5974,#5966,#5976,.T.); +#5974 = VERTEX_POINT('',#5975); +#5975 = CARTESIAN_POINT('',(1.35,-0.325,0.775)); +#5976 = LINE('',#5977,#5978); +#5977 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#5978 = VECTOR('',#5979,1.); +#5979 = DIRECTION('',(0.,-1.,0.)); +#5980 = ORIENTED_EDGE('',*,*,#5981,.F.); +#5981 = EDGE_CURVE('',#5982,#5974,#5984,.T.); +#5982 = VERTEX_POINT('',#5983); +#5983 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#5984 = LINE('',#5985,#5986); +#5985 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#5986 = VECTOR('',#5987,1.); +#5987 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5988 = ORIENTED_EDGE('',*,*,#5989,.T.); +#5989 = EDGE_CURVE('',#5982,#5990,#5992,.T.); +#5990 = VERTEX_POINT('',#5991); +#5991 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#5992 = LINE('',#5993,#5994); +#5993 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#5994 = VECTOR('',#5995,1.); +#5995 = DIRECTION('',(0.,-1.,0.)); +#5996 = ORIENTED_EDGE('',*,*,#5997,.T.); +#5997 = EDGE_CURVE('',#5990,#5998,#6000,.T.); +#5998 = VERTEX_POINT('',#5999); +#5999 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#6000 = LINE('',#6001,#6002); +#6001 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#6002 = VECTOR('',#6003,1.); +#6003 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6004 = ORIENTED_EDGE('',*,*,#6005,.T.); +#6005 = EDGE_CURVE('',#5998,#5911,#6006,.T.); +#6006 = LINE('',#6007,#6008); +#6007 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#6008 = VECTOR('',#6009,1.); +#6009 = DIRECTION('',(-1.,0.,0.)); +#6010 = PLANE('',#6011); +#6011 = AXIS2_PLACEMENT_3D('',#6012,#6013,#6014); +#6012 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#6013 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#6014 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#6015 = ADVANCED_FACE('',(#6016),#6085,.F.); +#6016 = FACE_BOUND('',#6017,.F.); +#6017 = EDGE_LOOP('',(#6018,#6019,#6020,#6028,#6037,#6045,#6053,#6061, + #6070,#6078)); +#6018 = ORIENTED_EDGE('',*,*,#5652,.F.); +#6019 = ORIENTED_EDGE('',*,*,#5692,.T.); +#6020 = ORIENTED_EDGE('',*,*,#6021,.T.); +#6021 = EDGE_CURVE('',#5685,#6022,#6024,.T.); +#6022 = VERTEX_POINT('',#6023); +#6023 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#6024 = LINE('',#6025,#6026); +#6025 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#6026 = VECTOR('',#6027,1.); +#6027 = DIRECTION('',(-0.142742572604,1.584760906992E-17,-0.989759848633 + )); +#6028 = ORIENTED_EDGE('',*,*,#6029,.T.); +#6029 = EDGE_CURVE('',#6022,#6030,#6032,.T.); +#6030 = VERTEX_POINT('',#6031); +#6031 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17) + ); +#6032 = CIRCLE('',#6033,0.32); +#6033 = AXIS2_PLACEMENT_3D('',#6034,#6035,#6036); +#6034 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#6035 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6036 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#6037 = ORIENTED_EDGE('',*,*,#6038,.T.); +#6038 = EDGE_CURVE('',#6030,#6039,#6041,.T.); +#6039 = VERTEX_POINT('',#6040); +#6040 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#6041 = LINE('',#6042,#6043); +#6042 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17) + ); +#6043 = VECTOR('',#6044,1.); +#6044 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6045 = ORIENTED_EDGE('',*,*,#6046,.T.); +#6046 = EDGE_CURVE('',#6039,#6047,#6049,.T.); +#6047 = VERTEX_POINT('',#6048); +#6048 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#6049 = LINE('',#6050,#6051); +#6050 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#6051 = VECTOR('',#6052,1.); +#6052 = DIRECTION('',(0.,0.,1.)); +#6053 = ORIENTED_EDGE('',*,*,#6054,.T.); +#6054 = EDGE_CURVE('',#6047,#6055,#6057,.T.); +#6055 = VERTEX_POINT('',#6056); +#6056 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#6057 = LINE('',#6058,#6059); +#6058 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#6059 = VECTOR('',#6060,1.); +#6060 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6061 = ORIENTED_EDGE('',*,*,#6062,.T.); +#6062 = EDGE_CURVE('',#6055,#6063,#6065,.T.); +#6063 = VERTEX_POINT('',#6064); +#6064 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#6065 = CIRCLE('',#6066,0.12); +#6066 = AXIS2_PLACEMENT_3D('',#6067,#6068,#6069); +#6067 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#6068 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6069 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#6070 = ORIENTED_EDGE('',*,*,#6071,.T.); +#6071 = EDGE_CURVE('',#6063,#6072,#6074,.T.); +#6072 = VERTEX_POINT('',#6073); +#6073 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#6074 = LINE('',#6075,#6076); +#6075 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#6076 = VECTOR('',#6077,1.); +#6077 = DIRECTION('',(0.142742572604,-1.584760906992E-17,0.989759848633) + ); +#6078 = ORIENTED_EDGE('',*,*,#6079,.T.); +#6079 = EDGE_CURVE('',#6072,#5653,#6080,.T.); +#6080 = CIRCLE('',#6081,0.32); +#6081 = AXIS2_PLACEMENT_3D('',#6082,#6083,#6084); +#6082 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#6083 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6084 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#6085 = PLANE('',#6086); +#6086 = AXIS2_PLACEMENT_3D('',#6087,#6088,#6089); +#6087 = CARTESIAN_POINT('',(-1.610729118287,-0.325,0.384660577966)); +#6088 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6089 = DIRECTION('',(0.,-0.,1.)); +#6090 = ADVANCED_FACE('',(#6091),#6109,.F.); +#6091 = FACE_BOUND('',#6092,.F.); +#6092 = EDGE_LOOP('',(#6093,#6094,#6102,#6108)); +#6093 = ORIENTED_EDGE('',*,*,#5684,.T.); +#6094 = ORIENTED_EDGE('',*,*,#6095,.T.); +#6095 = EDGE_CURVE('',#5676,#6096,#6098,.T.); +#6096 = VERTEX_POINT('',#6097); +#6097 = CARTESIAN_POINT('',(-1.523665661432,0.325,0.264432583147)); +#6098 = LINE('',#6099,#6100); +#6099 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#6100 = VECTOR('',#6101,1.); +#6101 = DIRECTION('',(-0.142742572604,1.584760906992E-17,-0.989759848633 + )); +#6102 = ORIENTED_EDGE('',*,*,#6103,.F.); +#6103 = EDGE_CURVE('',#6022,#6096,#6104,.T.); +#6104 = LINE('',#6105,#6106); +#6105 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#6106 = VECTOR('',#6107,1.); +#6107 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6108 = ORIENTED_EDGE('',*,*,#6021,.F.); +#6109 = PLANE('',#6110); +#6110 = AXIS2_PLACEMENT_3D('',#6111,#6112,#6113); +#6111 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#6112 = DIRECTION('',(-0.989759848633,1.098854172802E-16,0.142742572604) + ); +#6113 = DIRECTION('',(-0.142742572604,1.584760906992E-17,-0.989759848633 + )); +#6114 = ADVANCED_FACE('',(#6115),#6177,.T.); +#6115 = FACE_BOUND('',#6116,.T.); +#6116 = EDGE_LOOP('',(#6117,#6118,#6119,#6120,#6129,#6137,#6145,#6153, + #6162,#6170)); +#6117 = ORIENTED_EDGE('',*,*,#5707,.F.); +#6118 = ORIENTED_EDGE('',*,*,#5675,.T.); +#6119 = ORIENTED_EDGE('',*,*,#6095,.T.); +#6120 = ORIENTED_EDGE('',*,*,#6121,.T.); +#6121 = EDGE_CURVE('',#6096,#6122,#6124,.T.); +#6122 = VERTEX_POINT('',#6123); +#6123 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17)); +#6124 = CIRCLE('',#6125,0.32); +#6125 = AXIS2_PLACEMENT_3D('',#6126,#6127,#6128); +#6126 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#6127 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6128 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#6129 = ORIENTED_EDGE('',*,*,#6130,.T.); +#6130 = EDGE_CURVE('',#6122,#6131,#6133,.T.); +#6131 = VERTEX_POINT('',#6132); +#6132 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#6133 = LINE('',#6134,#6135); +#6134 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17)); +#6135 = VECTOR('',#6136,1.); +#6136 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6137 = ORIENTED_EDGE('',*,*,#6138,.T.); +#6138 = EDGE_CURVE('',#6131,#6139,#6141,.T.); +#6139 = VERTEX_POINT('',#6140); +#6140 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#6141 = LINE('',#6142,#6143); +#6142 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#6143 = VECTOR('',#6144,1.); +#6144 = DIRECTION('',(0.,0.,1.)); +#6145 = ORIENTED_EDGE('',*,*,#6146,.T.); +#6146 = EDGE_CURVE('',#6139,#6147,#6149,.T.); +#6147 = VERTEX_POINT('',#6148); +#6148 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.2)); +#6149 = LINE('',#6150,#6151); +#6150 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#6151 = VECTOR('',#6152,1.); +#6152 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6153 = ORIENTED_EDGE('',*,*,#6154,.T.); +#6154 = EDGE_CURVE('',#6147,#6155,#6157,.T.); +#6155 = VERTEX_POINT('',#6156); +#6156 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#6157 = CIRCLE('',#6158,0.12); +#6158 = AXIS2_PLACEMENT_3D('',#6159,#6160,#6161); +#6159 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#6160 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6161 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#6162 = ORIENTED_EDGE('',*,*,#6163,.T.); +#6163 = EDGE_CURVE('',#6155,#6164,#6166,.T.); +#6164 = VERTEX_POINT('',#6165); +#6165 = CARTESIAN_POINT('',(-1.690138480964,0.325,0.510567416853)); +#6166 = LINE('',#6167,#6168); +#6167 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#6168 = VECTOR('',#6169,1.); +#6169 = DIRECTION('',(0.142742572604,-1.584760906992E-17,0.989759848633) + ); +#6170 = ORIENTED_EDGE('',*,*,#6171,.T.); +#6171 = EDGE_CURVE('',#6164,#5708,#6172,.T.); +#6172 = CIRCLE('',#6173,0.32); +#6173 = AXIS2_PLACEMENT_3D('',#6174,#6175,#6176); +#6174 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#6175 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6176 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#6177 = PLANE('',#6178); +#6178 = AXIS2_PLACEMENT_3D('',#6179,#6180,#6181); +#6179 = CARTESIAN_POINT('',(-1.610729118287,0.325,0.384660577966)); +#6180 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6181 = DIRECTION('',(0.,-0.,1.)); +#6182 = ADVANCED_FACE('',(#6183),#6265,.F.); +#6183 = FACE_BOUND('',#6184,.F.); +#6184 = EDGE_LOOP('',(#6185,#6193,#6194,#6195,#6203,#6211,#6219,#6227, + #6235,#6243,#6251,#6259)); +#6185 = ORIENTED_EDGE('',*,*,#6186,.F.); +#6186 = EDGE_CURVE('',#5708,#6187,#6189,.T.); +#6187 = VERTEX_POINT('',#6188); +#6188 = CARTESIAN_POINT('',(-1.35,0.325,0.775)); +#6189 = LINE('',#6190,#6191); +#6190 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#6191 = VECTOR('',#6192,1.); +#6192 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6193 = ORIENTED_EDGE('',*,*,#5723,.T.); +#6194 = ORIENTED_EDGE('',*,*,#5893,.T.); +#6195 = ORIENTED_EDGE('',*,*,#6196,.T.); +#6196 = EDGE_CURVE('',#5887,#6197,#6199,.T.); +#6197 = VERTEX_POINT('',#6198); +#6198 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#6199 = LINE('',#6200,#6201); +#6200 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#6201 = VECTOR('',#6202,1.); +#6202 = DIRECTION('',(1.,0.,0.)); +#6203 = ORIENTED_EDGE('',*,*,#6204,.T.); +#6204 = EDGE_CURVE('',#6197,#6205,#6207,.T.); +#6205 = VERTEX_POINT('',#6206); +#6206 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6207 = LINE('',#6208,#6209); +#6208 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#6209 = VECTOR('',#6210,1.); +#6210 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6211 = ORIENTED_EDGE('',*,*,#6212,.T.); +#6212 = EDGE_CURVE('',#6205,#6213,#6215,.T.); +#6213 = VERTEX_POINT('',#6214); +#6214 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#6215 = LINE('',#6216,#6217); +#6216 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6217 = VECTOR('',#6218,1.); +#6218 = DIRECTION('',(0.,-1.,0.)); +#6219 = ORIENTED_EDGE('',*,*,#6220,.T.); +#6220 = EDGE_CURVE('',#6213,#6221,#6223,.T.); +#6221 = VERTEX_POINT('',#6222); +#6222 = CARTESIAN_POINT('',(1.35,0.325,0.775)); +#6223 = LINE('',#6224,#6225); +#6224 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#6225 = VECTOR('',#6226,1.); +#6226 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6227 = ORIENTED_EDGE('',*,*,#6228,.F.); +#6228 = EDGE_CURVE('',#6229,#6221,#6231,.T.); +#6229 = VERTEX_POINT('',#6230); +#6230 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6231 = LINE('',#6232,#6233); +#6232 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6233 = VECTOR('',#6234,1.); +#6234 = DIRECTION('',(0.,-1.,0.)); +#6235 = ORIENTED_EDGE('',*,*,#6236,.F.); +#6236 = EDGE_CURVE('',#6237,#6229,#6239,.T.); +#6237 = VERTEX_POINT('',#6238); +#6238 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6239 = LINE('',#6240,#6241); +#6240 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6241 = VECTOR('',#6242,1.); +#6242 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6243 = ORIENTED_EDGE('',*,*,#6244,.F.); +#6244 = EDGE_CURVE('',#6245,#6237,#6247,.T.); +#6245 = VERTEX_POINT('',#6246); +#6246 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6247 = LINE('',#6248,#6249); +#6248 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6249 = VECTOR('',#6250,1.); +#6250 = DIRECTION('',(1.,0.,0.)); +#6251 = ORIENTED_EDGE('',*,*,#6252,.F.); +#6252 = EDGE_CURVE('',#6253,#6245,#6255,.T.); +#6253 = VERTEX_POINT('',#6254); +#6254 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6255 = LINE('',#6256,#6257); +#6256 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6257 = VECTOR('',#6258,1.); +#6258 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#6259 = ORIENTED_EDGE('',*,*,#6260,.F.); +#6260 = EDGE_CURVE('',#6187,#6253,#6261,.T.); +#6261 = LINE('',#6262,#6263); +#6262 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6263 = VECTOR('',#6264,1.); +#6264 = DIRECTION('',(0.,1.,0.)); +#6265 = PLANE('',#6266); +#6266 = AXIS2_PLACEMENT_3D('',#6267,#6268,#6269); +#6267 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#6268 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#6269 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#6270 = ADVANCED_FACE('',(#6271),#6281,.F.); +#6271 = FACE_BOUND('',#6272,.F.); +#6272 = EDGE_LOOP('',(#6273,#6274,#6275,#6276)); +#6273 = ORIENTED_EDGE('',*,*,#5762,.T.); +#6274 = ORIENTED_EDGE('',*,*,#5918,.T.); +#6275 = ORIENTED_EDGE('',*,*,#6005,.F.); +#6276 = ORIENTED_EDGE('',*,*,#6277,.F.); +#6277 = EDGE_CURVE('',#5763,#5998,#6278,.T.); +#6278 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6279,#6280),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6279 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#6280 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#6281 = PLANE('',#6282); +#6282 = AXIS2_PLACEMENT_3D('',#6283,#6284,#6285); +#6283 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#6284 = DIRECTION('',(0.,1.,0.)); +#6285 = DIRECTION('',(-1.,0.,0.)); +#6286 = ADVANCED_FACE('',(#6287),#6297,.F.); +#6287 = FACE_BOUND('',#6288,.F.); +#6288 = EDGE_LOOP('',(#6289,#6290,#6295,#6296)); +#6289 = ORIENTED_EDGE('',*,*,#5791,.T.); +#6290 = ORIENTED_EDGE('',*,*,#6291,.T.); +#6291 = EDGE_CURVE('',#5785,#6197,#6292,.T.); +#6292 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6293,#6294),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6293 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#6294 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#6295 = ORIENTED_EDGE('',*,*,#6196,.F.); +#6296 = ORIENTED_EDGE('',*,*,#5886,.F.); +#6297 = PLANE('',#6298); +#6298 = AXIS2_PLACEMENT_3D('',#6299,#6300,#6301); +#6299 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#6300 = DIRECTION('',(0.,-1.,0.)); +#6301 = DIRECTION('',(1.,0.,0.)); +#6302 = ADVANCED_FACE('',(#6303),#6313,.F.); +#6303 = FACE_BOUND('',#6304,.F.); +#6304 = EDGE_LOOP('',(#6305,#6306,#6307,#6308)); +#6305 = ORIENTED_EDGE('',*,*,#5808,.T.); +#6306 = ORIENTED_EDGE('',*,*,#6277,.T.); +#6307 = ORIENTED_EDGE('',*,*,#5997,.F.); +#6308 = ORIENTED_EDGE('',*,*,#6309,.F.); +#6309 = EDGE_CURVE('',#5809,#5990,#6310,.T.); +#6310 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6311,#6312),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6311 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#6312 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#6313 = PLANE('',#6314); +#6314 = AXIS2_PLACEMENT_3D('',#6315,#6316,#6317); +#6315 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#6316 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#6317 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6318 = ADVANCED_FACE('',(#6319),#6329,.F.); +#6319 = FACE_BOUND('',#6320,.F.); +#6320 = EDGE_LOOP('',(#6321,#6322,#6327,#6328)); +#6321 = ORIENTED_EDGE('',*,*,#5837,.T.); +#6322 = ORIENTED_EDGE('',*,*,#6323,.T.); +#6323 = EDGE_CURVE('',#5831,#6205,#6324,.T.); +#6324 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6325,#6326),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6325 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#6326 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6327 = ORIENTED_EDGE('',*,*,#6204,.F.); +#6328 = ORIENTED_EDGE('',*,*,#6291,.F.); +#6329 = PLANE('',#6330); +#6330 = AXIS2_PLACEMENT_3D('',#6331,#6332,#6333); +#6331 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#6332 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6333 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6334 = ADVANCED_FACE('',(#6335),#6346,.F.); +#6335 = FACE_BOUND('',#6336,.F.); +#6336 = EDGE_LOOP('',(#6337,#6338,#6339,#6345)); +#6337 = ORIENTED_EDGE('',*,*,#6323,.F.); +#6338 = ORIENTED_EDGE('',*,*,#5870,.T.); +#6339 = ORIENTED_EDGE('',*,*,#6340,.T.); +#6340 = EDGE_CURVE('',#5863,#6213,#6341,.T.); +#6341 = LINE('',#6342,#6343); +#6342 = CARTESIAN_POINT('',(1.375,0.325,0.579830288983)); +#6343 = VECTOR('',#6344,1.); +#6344 = DIRECTION('',(0.,0.,1.)); +#6345 = ORIENTED_EDGE('',*,*,#6212,.F.); +#6346 = PLANE('',#6347); +#6347 = AXIS2_PLACEMENT_3D('',#6348,#6349,#6350); +#6348 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6349 = DIRECTION('',(-1.,0.,0.)); +#6350 = DIRECTION('',(0.,-1.,0.)); +#6351 = ADVANCED_FACE('',(#6352),#6379,.F.); +#6352 = FACE_BOUND('',#6353,.F.); +#6353 = EDGE_LOOP('',(#6354,#6355,#6364,#6372)); +#6354 = ORIENTED_EDGE('',*,*,#5862,.T.); +#6355 = ORIENTED_EDGE('',*,*,#6356,.T.); +#6356 = EDGE_CURVE('',#5855,#6357,#6359,.T.); +#6357 = VERTEX_POINT('',#6358); +#6358 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#6359 = CIRCLE('',#6360,0.12); +#6360 = AXIS2_PLACEMENT_3D('',#6361,#6362,#6363); +#6361 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#6362 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6363 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#6364 = ORIENTED_EDGE('',*,*,#6365,.F.); +#6365 = EDGE_CURVE('',#6366,#6357,#6368,.T.); +#6366 = VERTEX_POINT('',#6367); +#6367 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#6368 = LINE('',#6369,#6370); +#6369 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#6370 = VECTOR('',#6371,1.); +#6371 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6372 = ORIENTED_EDGE('',*,*,#6373,.F.); +#6373 = EDGE_CURVE('',#5863,#6366,#6374,.T.); +#6374 = CIRCLE('',#6375,0.12); +#6375 = AXIS2_PLACEMENT_3D('',#6376,#6377,#6378); +#6376 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#6377 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6378 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#6379 = CYLINDRICAL_SURFACE('',#6380,0.12); +#6380 = AXIS2_PLACEMENT_3D('',#6381,#6382,#6383); +#6381 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#6382 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6383 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#6384 = ADVANCED_FACE('',(#6385),#6396,.F.); +#6385 = FACE_BOUND('',#6386,.F.); +#6386 = EDGE_LOOP('',(#6387,#6393,#6394,#6395)); +#6387 = ORIENTED_EDGE('',*,*,#6388,.F.); +#6388 = EDGE_CURVE('',#5855,#5982,#6389,.T.); +#6389 = LINE('',#6390,#6391); +#6390 = CARTESIAN_POINT('',(1.375,-0.325,0.579830288983)); +#6391 = VECTOR('',#6392,1.); +#6392 = DIRECTION('',(0.,0.,1.)); +#6393 = ORIENTED_EDGE('',*,*,#5854,.T.); +#6394 = ORIENTED_EDGE('',*,*,#6309,.T.); +#6395 = ORIENTED_EDGE('',*,*,#5989,.F.); +#6396 = PLANE('',#6397); +#6397 = AXIS2_PLACEMENT_3D('',#6398,#6399,#6400); +#6398 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6399 = DIRECTION('',(-1.,0.,0.)); +#6400 = DIRECTION('',(0.,-1.,0.)); +#6401 = ADVANCED_FACE('',(#6402),#6418,.F.); +#6402 = FACE_BOUND('',#6403,.F.); +#6403 = EDGE_LOOP('',(#6404,#6405,#6411,#6412)); +#6404 = ORIENTED_EDGE('',*,*,#6220,.F.); +#6405 = ORIENTED_EDGE('',*,*,#6406,.T.); +#6406 = EDGE_CURVE('',#6213,#5982,#6407,.T.); +#6407 = LINE('',#6408,#6409); +#6408 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#6409 = VECTOR('',#6410,1.); +#6410 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6411 = ORIENTED_EDGE('',*,*,#5981,.T.); +#6412 = ORIENTED_EDGE('',*,*,#6413,.F.); +#6413 = EDGE_CURVE('',#6221,#5974,#6414,.T.); +#6414 = LINE('',#6415,#6416); +#6415 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6416 = VECTOR('',#6417,1.); +#6417 = DIRECTION('',(0.,-1.,0.)); +#6418 = PLANE('',#6419); +#6419 = AXIS2_PLACEMENT_3D('',#6420,#6421,#6422); +#6420 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#6421 = DIRECTION('',(0.,0.,-1.)); +#6422 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6423 = ADVANCED_FACE('',(#6424),#6449,.F.); +#6424 = FACE_BOUND('',#6425,.F.); +#6425 = EDGE_LOOP('',(#6426,#6427,#6428,#6429,#6436,#6444)); +#6426 = ORIENTED_EDGE('',*,*,#6228,.T.); +#6427 = ORIENTED_EDGE('',*,*,#6413,.T.); +#6428 = ORIENTED_EDGE('',*,*,#5973,.T.); +#6429 = ORIENTED_EDGE('',*,*,#6430,.T.); +#6430 = EDGE_CURVE('',#5966,#6431,#6433,.T.); +#6431 = VERTEX_POINT('',#6432); +#6432 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6433 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6434,#6435),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6434 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#6435 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6436 = ORIENTED_EDGE('',*,*,#6437,.F.); +#6437 = EDGE_CURVE('',#6438,#6431,#6440,.T.); +#6438 = VERTEX_POINT('',#6439); +#6439 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6440 = LINE('',#6441,#6442); +#6441 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6442 = VECTOR('',#6443,1.); +#6443 = DIRECTION('',(0.,-1.,0.)); +#6444 = ORIENTED_EDGE('',*,*,#6445,.F.); +#6445 = EDGE_CURVE('',#6229,#6438,#6446,.T.); +#6446 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6447,#6448),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6447 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6448 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6449 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6450,#6451) + ,(#6452,#6453 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#6450 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6451 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6452 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#6453 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6454 = ADVANCED_FACE('',(#6455),#6472,.F.); +#6455 = FACE_BOUND('',#6456,.F.); +#6456 = EDGE_LOOP('',(#6457,#6458,#6465,#6471)); +#6457 = ORIENTED_EDGE('',*,*,#5965,.T.); +#6458 = ORIENTED_EDGE('',*,*,#6459,.T.); +#6459 = EDGE_CURVE('',#5958,#6460,#6462,.T.); +#6460 = VERTEX_POINT('',#6461); +#6461 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6462 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6463,#6464),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6463 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#6464 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6465 = ORIENTED_EDGE('',*,*,#6466,.F.); +#6466 = EDGE_CURVE('',#6431,#6460,#6467,.T.); +#6467 = LINE('',#6468,#6469); +#6468 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6469 = VECTOR('',#6470,1.); +#6470 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6471 = ORIENTED_EDGE('',*,*,#6430,.F.); +#6472 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6473,#6474) + ,(#6475,#6476 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6473 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#6474 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6475 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#6476 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6477 = ADVANCED_FACE('',(#6478),#6495,.F.); +#6478 = FACE_BOUND('',#6479,.F.); +#6479 = EDGE_LOOP('',(#6480,#6481,#6488,#6494)); +#6480 = ORIENTED_EDGE('',*,*,#5957,.T.); +#6481 = ORIENTED_EDGE('',*,*,#6482,.T.); +#6482 = EDGE_CURVE('',#5950,#6483,#6485,.T.); +#6483 = VERTEX_POINT('',#6484); +#6484 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6485 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6486,#6487),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6486 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#6487 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6488 = ORIENTED_EDGE('',*,*,#6489,.F.); +#6489 = EDGE_CURVE('',#6460,#6483,#6490,.T.); +#6490 = LINE('',#6491,#6492); +#6491 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6492 = VECTOR('',#6493,1.); +#6493 = DIRECTION('',(-1.,0.,0.)); +#6494 = ORIENTED_EDGE('',*,*,#6459,.F.); +#6495 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6496,#6497) + ,(#6498,#6499 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#6496 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#6497 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6498 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#6499 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6500 = ADVANCED_FACE('',(#6501),#6518,.F.); +#6501 = FACE_BOUND('',#6502,.F.); +#6502 = EDGE_LOOP('',(#6503,#6504,#6511,#6517)); +#6503 = ORIENTED_EDGE('',*,*,#5949,.T.); +#6504 = ORIENTED_EDGE('',*,*,#6505,.T.); +#6505 = EDGE_CURVE('',#5942,#6506,#6508,.T.); +#6506 = VERTEX_POINT('',#6507); +#6507 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6508 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6509,#6510),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6509 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6510 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6511 = ORIENTED_EDGE('',*,*,#6512,.F.); +#6512 = EDGE_CURVE('',#6483,#6506,#6513,.T.); +#6513 = LINE('',#6514,#6515); +#6514 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6515 = VECTOR('',#6516,1.); +#6516 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#6517 = ORIENTED_EDGE('',*,*,#6482,.F.); +#6518 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6519,#6520) + ,(#6521,#6522 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6519 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#6520 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6521 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6522 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6523 = ADVANCED_FACE('',(#6524),#6548,.F.); +#6524 = FACE_BOUND('',#6525,.F.); +#6525 = EDGE_LOOP('',(#6526,#6527,#6533,#6534,#6541,#6547)); +#6526 = ORIENTED_EDGE('',*,*,#5941,.T.); +#6527 = ORIENTED_EDGE('',*,*,#6528,.T.); +#6528 = EDGE_CURVE('',#5934,#6187,#6529,.T.); +#6529 = LINE('',#6530,#6531); +#6530 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6531 = VECTOR('',#6532,1.); +#6532 = DIRECTION('',(0.,1.,0.)); +#6533 = ORIENTED_EDGE('',*,*,#6260,.T.); +#6534 = ORIENTED_EDGE('',*,*,#6535,.T.); +#6535 = EDGE_CURVE('',#6253,#6536,#6538,.T.); +#6536 = VERTEX_POINT('',#6537); +#6537 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6538 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6539,#6540),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6539 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6540 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6541 = ORIENTED_EDGE('',*,*,#6542,.F.); +#6542 = EDGE_CURVE('',#6506,#6536,#6543,.T.); +#6543 = LINE('',#6544,#6545); +#6544 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6545 = VECTOR('',#6546,1.); +#6546 = DIRECTION('',(0.,1.,0.)); +#6547 = ORIENTED_EDGE('',*,*,#6505,.F.); +#6548 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6549,#6550) + ,(#6551,#6552 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#6549 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6550 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6551 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6552 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6553 = ADVANCED_FACE('',(#6554),#6565,.F.); +#6554 = FACE_BOUND('',#6555,.F.); +#6555 = EDGE_LOOP('',(#6556,#6557,#6563,#6564)); +#6556 = ORIENTED_EDGE('',*,*,#5933,.F.); +#6557 = ORIENTED_EDGE('',*,*,#6558,.T.); +#6558 = EDGE_CURVE('',#5653,#5708,#6559,.T.); +#6559 = LINE('',#6560,#6561); +#6560 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#6561 = VECTOR('',#6562,1.); +#6562 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6563 = ORIENTED_EDGE('',*,*,#6186,.T.); +#6564 = ORIENTED_EDGE('',*,*,#6528,.F.); +#6565 = PLANE('',#6566); +#6566 = AXIS2_PLACEMENT_3D('',#6567,#6568,#6569); +#6567 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#6568 = DIRECTION('',(0.,0.,-1.)); +#6569 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6570 = ADVANCED_FACE('',(#6571),#6582,.T.); +#6571 = FACE_BOUND('',#6572,.T.); +#6572 = EDGE_LOOP('',(#6573,#6574,#6575,#6576)); +#6573 = ORIENTED_EDGE('',*,*,#6079,.T.); +#6574 = ORIENTED_EDGE('',*,*,#6558,.T.); +#6575 = ORIENTED_EDGE('',*,*,#6171,.F.); +#6576 = ORIENTED_EDGE('',*,*,#6577,.F.); +#6577 = EDGE_CURVE('',#6072,#6164,#6578,.T.); +#6578 = LINE('',#6579,#6580); +#6579 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#6580 = VECTOR('',#6581,1.); +#6581 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6582 = CYLINDRICAL_SURFACE('',#6583,0.32); +#6583 = AXIS2_PLACEMENT_3D('',#6584,#6585,#6586); +#6584 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#6585 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#6586 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#6587 = ADVANCED_FACE('',(#6588),#6599,.F.); +#6588 = FACE_BOUND('',#6589,.F.); +#6589 = EDGE_LOOP('',(#6590,#6596,#6597,#6598)); +#6590 = ORIENTED_EDGE('',*,*,#6591,.T.); +#6591 = EDGE_CURVE('',#6063,#6155,#6592,.T.); +#6592 = LINE('',#6593,#6594); +#6593 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#6594 = VECTOR('',#6595,1.); +#6595 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6596 = ORIENTED_EDGE('',*,*,#6163,.T.); +#6597 = ORIENTED_EDGE('',*,*,#6577,.F.); +#6598 = ORIENTED_EDGE('',*,*,#6071,.F.); +#6599 = PLANE('',#6600); +#6600 = AXIS2_PLACEMENT_3D('',#6601,#6602,#6603); +#6601 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#6602 = DIRECTION('',(0.989759848633,-1.098854172802E-16,-0.142742572604 + )); +#6603 = DIRECTION('',(0.142742572604,-1.584760906992E-17,0.989759848633) + ); +#6604 = ADVANCED_FACE('',(#6605),#6616,.F.); +#6605 = FACE_BOUND('',#6606,.F.); +#6606 = EDGE_LOOP('',(#6607,#6613,#6614,#6615)); +#6607 = ORIENTED_EDGE('',*,*,#6608,.T.); +#6608 = EDGE_CURVE('',#6055,#6147,#6609,.T.); +#6609 = LINE('',#6610,#6611); +#6610 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#6611 = VECTOR('',#6612,1.); +#6612 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6613 = ORIENTED_EDGE('',*,*,#6154,.T.); +#6614 = ORIENTED_EDGE('',*,*,#6591,.F.); +#6615 = ORIENTED_EDGE('',*,*,#6062,.F.); +#6616 = CYLINDRICAL_SURFACE('',#6617,0.12); +#6617 = AXIS2_PLACEMENT_3D('',#6618,#6619,#6620); +#6618 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#6619 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6620 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#6621 = ADVANCED_FACE('',(#6622),#6633,.F.); +#6622 = FACE_BOUND('',#6623,.F.); +#6623 = EDGE_LOOP('',(#6624,#6630,#6631,#6632)); +#6624 = ORIENTED_EDGE('',*,*,#6625,.T.); +#6625 = EDGE_CURVE('',#6047,#6139,#6626,.T.); +#6626 = LINE('',#6627,#6628); +#6627 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#6628 = VECTOR('',#6629,1.); +#6629 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6630 = ORIENTED_EDGE('',*,*,#6146,.T.); +#6631 = ORIENTED_EDGE('',*,*,#6608,.F.); +#6632 = ORIENTED_EDGE('',*,*,#6054,.F.); +#6633 = PLANE('',#6634); +#6634 = AXIS2_PLACEMENT_3D('',#6635,#6636,#6637); +#6635 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#6636 = DIRECTION('',(0.,0.,-1.)); +#6637 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6638 = ADVANCED_FACE('',(#6639),#6650,.F.); +#6639 = FACE_BOUND('',#6640,.F.); +#6640 = EDGE_LOOP('',(#6641,#6647,#6648,#6649)); +#6641 = ORIENTED_EDGE('',*,*,#6642,.T.); +#6642 = EDGE_CURVE('',#6039,#6131,#6643,.T.); +#6643 = LINE('',#6644,#6645); +#6644 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#6645 = VECTOR('',#6646,1.); +#6646 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6647 = ORIENTED_EDGE('',*,*,#6138,.T.); +#6648 = ORIENTED_EDGE('',*,*,#6625,.F.); +#6649 = ORIENTED_EDGE('',*,*,#6046,.F.); +#6650 = PLANE('',#6651); +#6651 = AXIS2_PLACEMENT_3D('',#6652,#6653,#6654); +#6652 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#6653 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6654 = DIRECTION('',(0.,0.,1.)); +#6655 = ADVANCED_FACE('',(#6656),#6667,.F.); +#6656 = FACE_BOUND('',#6657,.F.); +#6657 = EDGE_LOOP('',(#6658,#6664,#6665,#6666)); +#6658 = ORIENTED_EDGE('',*,*,#6659,.T.); +#6659 = EDGE_CURVE('',#6030,#6122,#6660,.T.); +#6660 = LINE('',#6661,#6662); +#6661 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17) + ); +#6662 = VECTOR('',#6663,1.); +#6663 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6664 = ORIENTED_EDGE('',*,*,#6130,.T.); +#6665 = ORIENTED_EDGE('',*,*,#6642,.F.); +#6666 = ORIENTED_EDGE('',*,*,#6038,.F.); +#6667 = PLANE('',#6668); +#6668 = AXIS2_PLACEMENT_3D('',#6669,#6670,#6671); +#6669 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17) + ); +#6670 = DIRECTION('',(0.,0.,1.)); +#6671 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6672 = ADVANCED_FACE('',(#6673),#6679,.T.); +#6673 = FACE_BOUND('',#6674,.T.); +#6674 = EDGE_LOOP('',(#6675,#6676,#6677,#6678)); +#6675 = ORIENTED_EDGE('',*,*,#6029,.T.); +#6676 = ORIENTED_EDGE('',*,*,#6659,.T.); +#6677 = ORIENTED_EDGE('',*,*,#6121,.F.); +#6678 = ORIENTED_EDGE('',*,*,#6103,.F.); +#6679 = CYLINDRICAL_SURFACE('',#6680,0.32); +#6680 = AXIS2_PLACEMENT_3D('',#6681,#6682,#6683); +#6681 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#6682 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#6683 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#6684 = ADVANCED_FACE('',(#6685),#6702,.F.); +#6685 = FACE_BOUND('',#6686,.F.); +#6686 = EDGE_LOOP('',(#6687,#6688,#6695,#6701)); +#6687 = ORIENTED_EDGE('',*,*,#6252,.T.); +#6688 = ORIENTED_EDGE('',*,*,#6689,.T.); +#6689 = EDGE_CURVE('',#6245,#6690,#6692,.T.); +#6690 = VERTEX_POINT('',#6691); +#6691 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6692 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6693,#6694),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6693 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6694 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6695 = ORIENTED_EDGE('',*,*,#6696,.F.); +#6696 = EDGE_CURVE('',#6536,#6690,#6697,.T.); +#6697 = LINE('',#6698,#6699); +#6698 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6699 = VECTOR('',#6700,1.); +#6700 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#6701 = ORIENTED_EDGE('',*,*,#6535,.F.); +#6702 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6703,#6704) + ,(#6705,#6706 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6703 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6704 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6705 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6706 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6707 = ADVANCED_FACE('',(#6708),#6725,.F.); +#6708 = FACE_BOUND('',#6709,.F.); +#6709 = EDGE_LOOP('',(#6710,#6711,#6718,#6724)); +#6710 = ORIENTED_EDGE('',*,*,#6244,.T.); +#6711 = ORIENTED_EDGE('',*,*,#6712,.T.); +#6712 = EDGE_CURVE('',#6237,#6713,#6715,.T.); +#6713 = VERTEX_POINT('',#6714); +#6714 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6715 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6716,#6717),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6716 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6717 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6718 = ORIENTED_EDGE('',*,*,#6719,.F.); +#6719 = EDGE_CURVE('',#6690,#6713,#6720,.T.); +#6720 = LINE('',#6721,#6722); +#6721 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6722 = VECTOR('',#6723,1.); +#6723 = DIRECTION('',(1.,0.,0.)); +#6724 = ORIENTED_EDGE('',*,*,#6689,.F.); +#6725 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6726,#6727) + ,(#6728,#6729 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#6726 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6727 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6728 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6729 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6730 = ADVANCED_FACE('',(#6731),#6742,.F.); +#6731 = FACE_BOUND('',#6732,.F.); +#6732 = EDGE_LOOP('',(#6733,#6734,#6735,#6741)); +#6733 = ORIENTED_EDGE('',*,*,#6236,.T.); +#6734 = ORIENTED_EDGE('',*,*,#6445,.T.); +#6735 = ORIENTED_EDGE('',*,*,#6736,.F.); +#6736 = EDGE_CURVE('',#6713,#6438,#6737,.T.); +#6737 = LINE('',#6738,#6739); +#6738 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6739 = VECTOR('',#6740,1.); +#6740 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6741 = ORIENTED_EDGE('',*,*,#6712,.F.); +#6742 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6743,#6744) + ,(#6745,#6746 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6743 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6744 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6745 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6746 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6747 = ADVANCED_FACE('',(#6748),#6817,.F.); +#6748 = FACE_BOUND('',#6749,.F.); +#6749 = EDGE_LOOP('',(#6750,#6751,#6752,#6760,#6769,#6777,#6785,#6793, + #6802,#6810)); +#6750 = ORIENTED_EDGE('',*,*,#6340,.F.); +#6751 = ORIENTED_EDGE('',*,*,#6373,.T.); +#6752 = ORIENTED_EDGE('',*,*,#6753,.T.); +#6753 = EDGE_CURVE('',#6366,#6754,#6756,.T.); +#6754 = VERTEX_POINT('',#6755); +#6755 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#6756 = LINE('',#6757,#6758); +#6757 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#6758 = VECTOR('',#6759,1.); +#6759 = DIRECTION('',(0.142742572604,-3.169521813984E-17,-0.989759848633 + )); +#6760 = ORIENTED_EDGE('',*,*,#6761,.T.); +#6761 = EDGE_CURVE('',#6754,#6762,#6764,.T.); +#6762 = VERTEX_POINT('',#6763); +#6763 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17)); +#6764 = CIRCLE('',#6765,0.32); +#6765 = AXIS2_PLACEMENT_3D('',#6766,#6767,#6768); +#6766 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#6767 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6768 = DIRECTION('',(-0.984807753012,2.186712484447E-16,-0.173648177667 + )); +#6769 = ORIENTED_EDGE('',*,*,#6770,.T.); +#6770 = EDGE_CURVE('',#6762,#6771,#6773,.T.); +#6771 = VERTEX_POINT('',#6772); +#6772 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#6773 = LINE('',#6774,#6775); +#6774 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17)); +#6775 = VECTOR('',#6776,1.); +#6776 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6777 = ORIENTED_EDGE('',*,*,#6778,.T.); +#6778 = EDGE_CURVE('',#6771,#6779,#6781,.T.); +#6779 = VERTEX_POINT('',#6780); +#6780 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#6781 = LINE('',#6782,#6783); +#6782 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#6783 = VECTOR('',#6784,1.); +#6784 = DIRECTION('',(0.,0.,1.)); +#6785 = ORIENTED_EDGE('',*,*,#6786,.T.); +#6786 = EDGE_CURVE('',#6779,#6787,#6789,.T.); +#6787 = VERTEX_POINT('',#6788); +#6788 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#6789 = LINE('',#6790,#6791); +#6790 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#6791 = VECTOR('',#6792,1.); +#6792 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6793 = ORIENTED_EDGE('',*,*,#6794,.T.); +#6794 = EDGE_CURVE('',#6787,#6795,#6797,.T.); +#6795 = VERTEX_POINT('',#6796); +#6796 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#6797 = CIRCLE('',#6798,0.12); +#6798 = AXIS2_PLACEMENT_3D('',#6799,#6800,#6801); +#6799 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#6800 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6801 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#6802 = ORIENTED_EDGE('',*,*,#6803,.T.); +#6803 = EDGE_CURVE('',#6795,#6804,#6806,.T.); +#6804 = VERTEX_POINT('',#6805); +#6805 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#6806 = LINE('',#6807,#6808); +#6807 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#6808 = VECTOR('',#6809,1.); +#6809 = DIRECTION('',(-0.142742572604,3.169521813984E-17,0.989759848633) + ); +#6810 = ORIENTED_EDGE('',*,*,#6811,.T.); +#6811 = EDGE_CURVE('',#6804,#6213,#6812,.T.); +#6812 = CIRCLE('',#6813,0.32); +#6813 = AXIS2_PLACEMENT_3D('',#6814,#6815,#6816); +#6814 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#6815 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6816 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667) + ); +#6817 = PLANE('',#6818); +#6818 = AXIS2_PLACEMENT_3D('',#6819,#6820,#6821); +#6819 = CARTESIAN_POINT('',(1.610729118287,0.325,0.384660577966)); +#6820 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6821 = DIRECTION('',(0.,0.,1.)); +#6822 = ADVANCED_FACE('',(#6823),#6841,.F.); +#6823 = FACE_BOUND('',#6824,.F.); +#6824 = EDGE_LOOP('',(#6825,#6826,#6834,#6840)); +#6825 = ORIENTED_EDGE('',*,*,#6365,.T.); +#6826 = ORIENTED_EDGE('',*,*,#6827,.T.); +#6827 = EDGE_CURVE('',#6357,#6828,#6830,.T.); +#6828 = VERTEX_POINT('',#6829); +#6829 = CARTESIAN_POINT('',(1.523665661432,-0.325,0.264432583147)); +#6830 = LINE('',#6831,#6832); +#6831 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#6832 = VECTOR('',#6833,1.); +#6833 = DIRECTION('',(0.142742572604,-3.169521813984E-17,-0.989759848633 + )); +#6834 = ORIENTED_EDGE('',*,*,#6835,.F.); +#6835 = EDGE_CURVE('',#6754,#6828,#6836,.T.); +#6836 = LINE('',#6837,#6838); +#6837 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#6838 = VECTOR('',#6839,1.); +#6839 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6840 = ORIENTED_EDGE('',*,*,#6753,.F.); +#6841 = PLANE('',#6842); +#6842 = AXIS2_PLACEMENT_3D('',#6843,#6844,#6845); +#6843 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#6844 = DIRECTION('',(0.989759848633,-2.197708345604E-16,0.142742572604) + ); +#6845 = DIRECTION('',(0.142742572604,-3.169521813984E-17,-0.989759848633 + )); +#6846 = ADVANCED_FACE('',(#6847),#6909,.T.); +#6847 = FACE_BOUND('',#6848,.T.); +#6848 = EDGE_LOOP('',(#6849,#6850,#6851,#6852,#6861,#6869,#6877,#6885, + #6894,#6902)); +#6849 = ORIENTED_EDGE('',*,*,#6388,.F.); +#6850 = ORIENTED_EDGE('',*,*,#6356,.T.); +#6851 = ORIENTED_EDGE('',*,*,#6827,.T.); +#6852 = ORIENTED_EDGE('',*,*,#6853,.T.); +#6853 = EDGE_CURVE('',#6828,#6854,#6856,.T.); +#6854 = VERTEX_POINT('',#6855); +#6855 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17)); +#6856 = CIRCLE('',#6857,0.32); +#6857 = AXIS2_PLACEMENT_3D('',#6858,#6859,#6860); +#6858 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#6859 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6860 = DIRECTION('',(-0.984807753012,2.186712484447E-16,-0.173648177667 + )); +#6861 = ORIENTED_EDGE('',*,*,#6862,.T.); +#6862 = EDGE_CURVE('',#6854,#6863,#6865,.T.); +#6863 = VERTEX_POINT('',#6864); +#6864 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#6865 = LINE('',#6866,#6867); +#6866 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17)); +#6867 = VECTOR('',#6868,1.); +#6868 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6869 = ORIENTED_EDGE('',*,*,#6870,.T.); +#6870 = EDGE_CURVE('',#6863,#6871,#6873,.T.); +#6871 = VERTEX_POINT('',#6872); +#6872 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#6873 = LINE('',#6874,#6875); +#6874 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#6875 = VECTOR('',#6876,1.); +#6876 = DIRECTION('',(0.,0.,1.)); +#6877 = ORIENTED_EDGE('',*,*,#6878,.T.); +#6878 = EDGE_CURVE('',#6871,#6879,#6881,.T.); +#6879 = VERTEX_POINT('',#6880); +#6880 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.2)); +#6881 = LINE('',#6882,#6883); +#6882 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#6883 = VECTOR('',#6884,1.); +#6884 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6885 = ORIENTED_EDGE('',*,*,#6886,.T.); +#6886 = EDGE_CURVE('',#6879,#6887,#6889,.T.); +#6887 = VERTEX_POINT('',#6888); +#6888 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#6889 = CIRCLE('',#6890,0.12); +#6890 = AXIS2_PLACEMENT_3D('',#6891,#6892,#6893); +#6891 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#6892 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6893 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#6894 = ORIENTED_EDGE('',*,*,#6895,.T.); +#6895 = EDGE_CURVE('',#6887,#6896,#6898,.T.); +#6896 = VERTEX_POINT('',#6897); +#6897 = CARTESIAN_POINT('',(1.690138480964,-0.325,0.510567416853)); +#6898 = LINE('',#6899,#6900); +#6899 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#6900 = VECTOR('',#6901,1.); +#6901 = DIRECTION('',(-0.142742572604,3.169521813984E-17,0.989759848633) + ); +#6902 = ORIENTED_EDGE('',*,*,#6903,.T.); +#6903 = EDGE_CURVE('',#6896,#5982,#6904,.T.); +#6904 = CIRCLE('',#6905,0.32); +#6905 = AXIS2_PLACEMENT_3D('',#6906,#6907,#6908); +#6906 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#6907 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6908 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667) + ); +#6909 = PLANE('',#6910); +#6910 = AXIS2_PLACEMENT_3D('',#6911,#6912,#6913); +#6911 = CARTESIAN_POINT('',(1.610729118287,-0.325,0.384660577966)); +#6912 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6913 = DIRECTION('',(0.,0.,1.)); +#6914 = ADVANCED_FACE('',(#6915),#6926,.T.); +#6915 = FACE_BOUND('',#6916,.T.); +#6916 = EDGE_LOOP('',(#6917,#6918,#6919,#6920)); +#6917 = ORIENTED_EDGE('',*,*,#6811,.T.); +#6918 = ORIENTED_EDGE('',*,*,#6406,.T.); +#6919 = ORIENTED_EDGE('',*,*,#6903,.F.); +#6920 = ORIENTED_EDGE('',*,*,#6921,.F.); +#6921 = EDGE_CURVE('',#6804,#6896,#6922,.T.); +#6922 = LINE('',#6923,#6924); +#6923 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#6924 = VECTOR('',#6925,1.); +#6925 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6926 = CYLINDRICAL_SURFACE('',#6927,0.32); +#6927 = AXIS2_PLACEMENT_3D('',#6928,#6929,#6930); +#6928 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#6929 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6930 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667) + ); +#6931 = ADVANCED_FACE('',(#6932,#6942),#6976,.T.); +#6932 = FACE_BOUND('',#6933,.T.); +#6933 = EDGE_LOOP('',(#6934,#6935,#6936,#6937,#6938,#6939,#6940,#6941)); +#6934 = ORIENTED_EDGE('',*,*,#6542,.F.); +#6935 = ORIENTED_EDGE('',*,*,#6512,.F.); +#6936 = ORIENTED_EDGE('',*,*,#6489,.F.); +#6937 = ORIENTED_EDGE('',*,*,#6466,.F.); +#6938 = ORIENTED_EDGE('',*,*,#6437,.F.); +#6939 = ORIENTED_EDGE('',*,*,#6736,.F.); +#6940 = ORIENTED_EDGE('',*,*,#6719,.F.); +#6941 = ORIENTED_EDGE('',*,*,#6696,.F.); +#6942 = FACE_BOUND('',#6943,.T.); +#6943 = EDGE_LOOP('',(#6944,#6954,#6962,#6970)); +#6944 = ORIENTED_EDGE('',*,*,#6945,.T.); +#6945 = EDGE_CURVE('',#6946,#6948,#6950,.T.); +#6946 = VERTEX_POINT('',#6947); +#6947 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.25)); +#6948 = VERTEX_POINT('',#6949); +#6949 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.25)); +#6950 = LINE('',#6951,#6952); +#6951 = CARTESIAN_POINT('',(-1.233243103516,-0.608243103516,1.25)); +#6952 = VECTOR('',#6953,1.); +#6953 = DIRECTION('',(-1.,0.,0.)); +#6954 = ORIENTED_EDGE('',*,*,#6955,.T.); +#6955 = EDGE_CURVE('',#6948,#6956,#6958,.T.); +#6956 = VERTEX_POINT('',#6957); +#6957 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.25)); +#6958 = LINE('',#6959,#6960); +#6959 = CARTESIAN_POINT('',(-1.183243103516,-0.633682327637,1.25)); +#6960 = VECTOR('',#6961,1.); +#6961 = DIRECTION('',(0.,1.,0.)); +#6962 = ORIENTED_EDGE('',*,*,#6963,.F.); +#6963 = EDGE_CURVE('',#6964,#6956,#6966,.T.); +#6964 = VERTEX_POINT('',#6965); +#6965 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.25)); +#6966 = LINE('',#6967,#6968); +#6967 = CARTESIAN_POINT('',(-1.233243103516,0.608243103516,1.25)); +#6968 = VECTOR('',#6969,1.); +#6969 = DIRECTION('',(-1.,0.,0.)); +#6970 = ORIENTED_EDGE('',*,*,#6971,.F.); +#6971 = EDGE_CURVE('',#6946,#6964,#6972,.T.); +#6972 = LINE('',#6973,#6974); +#6973 = CARTESIAN_POINT('',(-0.683243103516,-0.633682327637,1.25)); +#6974 = VECTOR('',#6975,1.); +#6975 = DIRECTION('',(0.,1.,0.)); +#6976 = PLANE('',#6977); +#6977 = AXIS2_PLACEMENT_3D('',#6978,#6979,#6980); +#6978 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6979 = DIRECTION('',(0.,0.,1.)); +#6980 = DIRECTION('',(0.889522261294,0.456891832562,-0.)); +#6981 = ADVANCED_FACE('',(#6982),#6993,.F.); +#6982 = FACE_BOUND('',#6983,.F.); +#6983 = EDGE_LOOP('',(#6984,#6990,#6991,#6992)); +#6984 = ORIENTED_EDGE('',*,*,#6985,.T.); +#6985 = EDGE_CURVE('',#6795,#6887,#6986,.T.); +#6986 = LINE('',#6987,#6988); +#6987 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#6988 = VECTOR('',#6989,1.); +#6989 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6990 = ORIENTED_EDGE('',*,*,#6895,.T.); +#6991 = ORIENTED_EDGE('',*,*,#6921,.F.); +#6992 = ORIENTED_EDGE('',*,*,#6803,.F.); +#6993 = PLANE('',#6994); +#6994 = AXIS2_PLACEMENT_3D('',#6995,#6996,#6997); +#6995 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#6996 = DIRECTION('',(-0.989759848633,2.197708345604E-16,-0.142742572604 + )); +#6997 = DIRECTION('',(-0.142742572604,3.169521813984E-17,0.989759848633) + ); +#6998 = ADVANCED_FACE('',(#6999),#7010,.F.); +#6999 = FACE_BOUND('',#7000,.F.); +#7000 = EDGE_LOOP('',(#7001,#7007,#7008,#7009)); +#7001 = ORIENTED_EDGE('',*,*,#7002,.T.); +#7002 = EDGE_CURVE('',#6787,#6879,#7003,.T.); +#7003 = LINE('',#7004,#7005); +#7004 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#7005 = VECTOR('',#7006,1.); +#7006 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7007 = ORIENTED_EDGE('',*,*,#6886,.T.); +#7008 = ORIENTED_EDGE('',*,*,#6985,.F.); +#7009 = ORIENTED_EDGE('',*,*,#6794,.F.); +#7010 = CYLINDRICAL_SURFACE('',#7011,0.12); +#7011 = AXIS2_PLACEMENT_3D('',#7012,#7013,#7014); +#7012 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#7013 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#7014 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#7015 = ADVANCED_FACE('',(#7016),#7027,.F.); +#7016 = FACE_BOUND('',#7017,.F.); +#7017 = EDGE_LOOP('',(#7018,#7024,#7025,#7026)); +#7018 = ORIENTED_EDGE('',*,*,#7019,.T.); +#7019 = EDGE_CURVE('',#6779,#6871,#7020,.T.); +#7020 = LINE('',#7021,#7022); +#7021 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#7022 = VECTOR('',#7023,1.); +#7023 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7024 = ORIENTED_EDGE('',*,*,#6878,.T.); +#7025 = ORIENTED_EDGE('',*,*,#7002,.F.); +#7026 = ORIENTED_EDGE('',*,*,#6786,.F.); +#7027 = PLANE('',#7028); +#7028 = AXIS2_PLACEMENT_3D('',#7029,#7030,#7031); +#7029 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#7030 = DIRECTION('',(0.,0.,-1.)); +#7031 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#7032 = ADVANCED_FACE('',(#7033),#7044,.F.); +#7033 = FACE_BOUND('',#7034,.F.); +#7034 = EDGE_LOOP('',(#7035,#7041,#7042,#7043)); +#7035 = ORIENTED_EDGE('',*,*,#7036,.T.); +#7036 = EDGE_CURVE('',#6771,#6863,#7037,.T.); +#7037 = LINE('',#7038,#7039); +#7038 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#7039 = VECTOR('',#7040,1.); +#7040 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7041 = ORIENTED_EDGE('',*,*,#6870,.T.); +#7042 = ORIENTED_EDGE('',*,*,#7019,.F.); +#7043 = ORIENTED_EDGE('',*,*,#6778,.F.); +#7044 = PLANE('',#7045); +#7045 = AXIS2_PLACEMENT_3D('',#7046,#7047,#7048); +#7046 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#7047 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#7048 = DIRECTION('',(0.,0.,1.)); +#7049 = ADVANCED_FACE('',(#7050),#7061,.F.); +#7050 = FACE_BOUND('',#7051,.F.); +#7051 = EDGE_LOOP('',(#7052,#7058,#7059,#7060)); +#7052 = ORIENTED_EDGE('',*,*,#7053,.T.); +#7053 = EDGE_CURVE('',#6762,#6854,#7054,.T.); +#7054 = LINE('',#7055,#7056); +#7055 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17)); +#7056 = VECTOR('',#7057,1.); +#7057 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7058 = ORIENTED_EDGE('',*,*,#6862,.T.); +#7059 = ORIENTED_EDGE('',*,*,#7036,.F.); +#7060 = ORIENTED_EDGE('',*,*,#6770,.F.); +#7061 = PLANE('',#7062); +#7062 = AXIS2_PLACEMENT_3D('',#7063,#7064,#7065); +#7063 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17)); +#7064 = DIRECTION('',(0.,0.,1.)); +#7065 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#7066 = ADVANCED_FACE('',(#7067),#7073,.T.); +#7067 = FACE_BOUND('',#7068,.T.); +#7068 = EDGE_LOOP('',(#7069,#7070,#7071,#7072)); +#7069 = ORIENTED_EDGE('',*,*,#6761,.T.); +#7070 = ORIENTED_EDGE('',*,*,#7053,.T.); +#7071 = ORIENTED_EDGE('',*,*,#6853,.F.); +#7072 = ORIENTED_EDGE('',*,*,#6835,.F.); +#7073 = CYLINDRICAL_SURFACE('',#7074,0.32); +#7074 = AXIS2_PLACEMENT_3D('',#7075,#7076,#7077); +#7075 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#7076 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#7077 = DIRECTION('',(-0.984807753012,2.186712484447E-16,-0.173648177667 + )); +#7078 = ADVANCED_FACE('',(#7079),#7104,.F.); +#7079 = FACE_BOUND('',#7080,.F.); +#7080 = EDGE_LOOP('',(#7081,#7082,#7090,#7098)); +#7081 = ORIENTED_EDGE('',*,*,#6945,.T.); +#7082 = ORIENTED_EDGE('',*,*,#7083,.T.); +#7083 = EDGE_CURVE('',#6948,#7084,#7086,.T.); +#7084 = VERTEX_POINT('',#7085); +#7085 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#7086 = LINE('',#7087,#7088); +#7087 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#7088 = VECTOR('',#7089,1.); +#7089 = DIRECTION('',(0.,0.,1.)); +#7090 = ORIENTED_EDGE('',*,*,#7091,.T.); +#7091 = EDGE_CURVE('',#7084,#7092,#7094,.T.); +#7092 = VERTEX_POINT('',#7093); +#7093 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#7094 = LINE('',#7095,#7096); +#7095 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#7096 = VECTOR('',#7097,1.); +#7097 = DIRECTION('',(1.,0.,0.)); +#7098 = ORIENTED_EDGE('',*,*,#7099,.F.); +#7099 = EDGE_CURVE('',#6946,#7092,#7100,.T.); +#7100 = LINE('',#7101,#7102); +#7101 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#7102 = VECTOR('',#7103,1.); +#7103 = DIRECTION('',(0.,0.,1.)); +#7104 = PLANE('',#7105); +#7105 = AXIS2_PLACEMENT_3D('',#7106,#7107,#7108); +#7106 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#7107 = DIRECTION('',(0.,1.,0.)); +#7108 = DIRECTION('',(0.,-0.,1.)); +#7109 = ADVANCED_FACE('',(#7110),#7128,.T.); +#7110 = FACE_BOUND('',#7111,.T.); +#7111 = EDGE_LOOP('',(#7112,#7113,#7114,#7122)); +#7112 = ORIENTED_EDGE('',*,*,#7099,.F.); +#7113 = ORIENTED_EDGE('',*,*,#6971,.T.); +#7114 = ORIENTED_EDGE('',*,*,#7115,.T.); +#7115 = EDGE_CURVE('',#6964,#7116,#7118,.T.); +#7116 = VERTEX_POINT('',#7117); +#7117 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.26)); +#7118 = LINE('',#7119,#7120); +#7119 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.24)); +#7120 = VECTOR('',#7121,1.); +#7121 = DIRECTION('',(0.,0.,1.)); +#7122 = ORIENTED_EDGE('',*,*,#7123,.F.); +#7123 = EDGE_CURVE('',#7092,#7116,#7124,.T.); +#7124 = LINE('',#7125,#7126); +#7125 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#7126 = VECTOR('',#7127,1.); +#7127 = DIRECTION('',(0.,1.,0.)); +#7128 = PLANE('',#7129); +#7129 = AXIS2_PLACEMENT_3D('',#7130,#7131,#7132); +#7130 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#7131 = DIRECTION('',(1.,0.,0.)); +#7132 = DIRECTION('',(0.,0.,1.)); +#7133 = ADVANCED_FACE('',(#7134),#7152,.T.); +#7134 = FACE_BOUND('',#7135,.T.); +#7135 = EDGE_LOOP('',(#7136,#7137,#7145,#7151)); +#7136 = ORIENTED_EDGE('',*,*,#6963,.T.); +#7137 = ORIENTED_EDGE('',*,*,#7138,.T.); +#7138 = EDGE_CURVE('',#6956,#7139,#7141,.T.); +#7139 = VERTEX_POINT('',#7140); +#7140 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#7141 = LINE('',#7142,#7143); +#7142 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#7143 = VECTOR('',#7144,1.); +#7144 = DIRECTION('',(0.,0.,1.)); +#7145 = ORIENTED_EDGE('',*,*,#7146,.T.); +#7146 = EDGE_CURVE('',#7139,#7116,#7147,.T.); +#7147 = LINE('',#7148,#7149); +#7148 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#7149 = VECTOR('',#7150,1.); +#7150 = DIRECTION('',(1.,0.,0.)); +#7151 = ORIENTED_EDGE('',*,*,#7115,.F.); +#7152 = PLANE('',#7153); +#7153 = AXIS2_PLACEMENT_3D('',#7154,#7155,#7156); +#7154 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#7155 = DIRECTION('',(0.,1.,0.)); +#7156 = DIRECTION('',(0.,-0.,1.)); +#7157 = ADVANCED_FACE('',(#7158),#7169,.F.); +#7158 = FACE_BOUND('',#7159,.F.); +#7159 = EDGE_LOOP('',(#7160,#7161,#7162,#7163)); +#7160 = ORIENTED_EDGE('',*,*,#7083,.F.); +#7161 = ORIENTED_EDGE('',*,*,#6955,.T.); +#7162 = ORIENTED_EDGE('',*,*,#7138,.T.); +#7163 = ORIENTED_EDGE('',*,*,#7164,.F.); +#7164 = EDGE_CURVE('',#7084,#7139,#7165,.T.); +#7165 = LINE('',#7166,#7167); +#7166 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#7167 = VECTOR('',#7168,1.); +#7168 = DIRECTION('',(0.,1.,0.)); +#7169 = PLANE('',#7170); +#7170 = AXIS2_PLACEMENT_3D('',#7171,#7172,#7173); +#7171 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#7172 = DIRECTION('',(1.,0.,0.)); +#7173 = DIRECTION('',(0.,0.,1.)); +#7174 = ADVANCED_FACE('',(#7175),#7181,.T.); +#7175 = FACE_BOUND('',#7176,.T.); +#7176 = EDGE_LOOP('',(#7177,#7178,#7179,#7180)); +#7177 = ORIENTED_EDGE('',*,*,#7164,.F.); +#7178 = ORIENTED_EDGE('',*,*,#7091,.T.); +#7179 = ORIENTED_EDGE('',*,*,#7123,.T.); +#7180 = ORIENTED_EDGE('',*,*,#7146,.F.); +#7181 = PLANE('',#7182); +#7182 = AXIS2_PLACEMENT_3D('',#7183,#7184,#7185); +#7183 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#7184 = DIRECTION('',(0.,0.,1.)); +#7185 = DIRECTION('',(1.,0.,-0.)); +#7186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#7190)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#7187,#7188,#7189)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#7187 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#7188 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#7189 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#7190 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#7187, + 'distance_accuracy_value','confusion accuracy'); +#7191 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#7192,#7194); +#7192 = ( REPRESENTATION_RELATIONSHIP('','',#5497,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#7193) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#7193 = ITEM_DEFINED_TRANSFORMATION('','',#11,#71); +#7194 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #7195); +#7195 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('15','D2','',#5,#5492,$); +#7196 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#5494)); +#7197 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#7198,#7200); +#7198 = ( REPRESENTATION_RELATIONSHIP('','',#5497,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#7199) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#7199 = ITEM_DEFINED_TRANSFORMATION('','',#11,#75); +#7200 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #7201); +#7201 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('16','D3','',#5,#5492,$); +#7202 = SHAPE_DEFINITION_REPRESENTATION(#7203,#7209); +#7203 = PRODUCT_DEFINITION_SHAPE('','',#7204); +#7204 = PRODUCT_DEFINITION('design','',#7205,#7208); +#7205 = PRODUCT_DEFINITION_FORMATION('','',#7206); +#7206 = PRODUCT('LED_0603_1608Metric','LED_0603_1608Metric','',(#7207)); +#7207 = PRODUCT_CONTEXT('',#2,'mechanical'); +#7208 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#7209 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#7210),#8733); +#7210 = MANIFOLD_SOLID_BREP('',#7211); +#7211 = CLOSED_SHELL('',(#7212,#7252,#7299,#7378,#7402,#7442,#7473,#7490 + ,#7523,#7547,#7614,#7735,#7802,#7826,#7857,#7890,#7946,#7970,#7994, + #8018,#8051,#8063,#8126,#8151,#8168,#8192,#8210,#8228,#8246,#8263, + #8280,#8311,#8336,#8361,#8385,#8402,#8433,#8457,#8474,#8502,#8527, + #8551,#8576,#8623,#8640,#8652,#8674,#8686,#8704,#8722)); +#7212 = ADVANCED_FACE('',(#7213),#7247,.F.); +#7213 = FACE_BOUND('',#7214,.F.); +#7214 = EDGE_LOOP('',(#7215,#7225,#7233,#7241)); +#7215 = ORIENTED_EDGE('',*,*,#7216,.T.); +#7216 = EDGE_CURVE('',#7217,#7219,#7221,.T.); +#7217 = VERTEX_POINT('',#7218); +#7218 = CARTESIAN_POINT('',(-0.5,-0.4,0.47)); +#7219 = VERTEX_POINT('',#7220); +#7220 = CARTESIAN_POINT('',(-0.45,-0.4,1.1)); +#7221 = LINE('',#7222,#7223); +#7222 = CARTESIAN_POINT('',(-0.5,-0.4,0.47)); +#7223 = VECTOR('',#7224,1.); +#7224 = DIRECTION('',(7.911630099815E-02,0.,0.996865392576)); +#7225 = ORIENTED_EDGE('',*,*,#7226,.T.); +#7226 = EDGE_CURVE('',#7219,#7227,#7229,.T.); +#7227 = VERTEX_POINT('',#7228); +#7228 = CARTESIAN_POINT('',(0.45,-0.4,1.1)); +#7229 = LINE('',#7230,#7231); +#7230 = CARTESIAN_POINT('',(-0.45,-0.4,1.1)); +#7231 = VECTOR('',#7232,1.); +#7232 = DIRECTION('',(1.,0.,0.)); +#7233 = ORIENTED_EDGE('',*,*,#7234,.T.); +#7234 = EDGE_CURVE('',#7227,#7235,#7237,.T.); +#7235 = VERTEX_POINT('',#7236); +#7236 = CARTESIAN_POINT('',(0.5,-0.4,0.47)); +#7237 = LINE('',#7238,#7239); +#7238 = CARTESIAN_POINT('',(0.45,-0.4,1.1)); +#7239 = VECTOR('',#7240,1.); +#7240 = DIRECTION('',(7.911630099815E-02,0.,-0.996865392576)); +#7241 = ORIENTED_EDGE('',*,*,#7242,.T.); +#7242 = EDGE_CURVE('',#7235,#7217,#7243,.T.); +#7243 = LINE('',#7244,#7245); +#7244 = CARTESIAN_POINT('',(0.5,-0.4,0.47)); +#7245 = VECTOR('',#7246,1.); +#7246 = DIRECTION('',(-1.,0.,0.)); +#7247 = PLANE('',#7248); +#7248 = AXIS2_PLACEMENT_3D('',#7249,#7250,#7251); +#7249 = CARTESIAN_POINT('',(-8.772411109409E-18,-0.4,0.775044128294)); +#7250 = DIRECTION('',(0.,1.,0.)); +#7251 = DIRECTION('',(0.,-0.,1.)); +#7252 = ADVANCED_FACE('',(#7253),#7294,.T.); +#7253 = FACE_BOUND('',#7254,.T.); +#7254 = EDGE_LOOP('',(#7255,#7265,#7273,#7279,#7280,#7288)); +#7255 = ORIENTED_EDGE('',*,*,#7256,.T.); +#7256 = EDGE_CURVE('',#7257,#7259,#7261,.T.); +#7257 = VERTEX_POINT('',#7258); +#7258 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7259 = VERTEX_POINT('',#7260); +#7260 = CARTESIAN_POINT('',(-0.5,0.3,0.47)); +#7261 = LINE('',#7262,#7263); +#7262 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7263 = VECTOR('',#7264,1.); +#7264 = DIRECTION('',(0.,-1.,0.)); +#7265 = ORIENTED_EDGE('',*,*,#7266,.F.); +#7266 = EDGE_CURVE('',#7267,#7259,#7269,.T.); +#7267 = VERTEX_POINT('',#7268); +#7268 = CARTESIAN_POINT('',(-0.5,-0.3,0.47)); +#7269 = LINE('',#7270,#7271); +#7270 = CARTESIAN_POINT('',(-0.5,-0.4,0.47)); +#7271 = VECTOR('',#7272,1.); +#7272 = DIRECTION('',(0.,1.,0.)); +#7273 = ORIENTED_EDGE('',*,*,#7274,.T.); +#7274 = EDGE_CURVE('',#7267,#7217,#7275,.T.); +#7275 = LINE('',#7276,#7277); +#7276 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7277 = VECTOR('',#7278,1.); +#7278 = DIRECTION('',(0.,-1.,0.)); +#7279 = ORIENTED_EDGE('',*,*,#7216,.T.); +#7280 = ORIENTED_EDGE('',*,*,#7281,.F.); +#7281 = EDGE_CURVE('',#7282,#7219,#7284,.T.); +#7282 = VERTEX_POINT('',#7283); +#7283 = CARTESIAN_POINT('',(-0.45,0.4,1.1)); +#7284 = LINE('',#7285,#7286); +#7285 = CARTESIAN_POINT('',(-0.45,0.4,1.1)); +#7286 = VECTOR('',#7287,1.); +#7287 = DIRECTION('',(0.,-1.,0.)); +#7288 = ORIENTED_EDGE('',*,*,#7289,.F.); +#7289 = EDGE_CURVE('',#7257,#7282,#7290,.T.); +#7290 = LINE('',#7291,#7292); +#7291 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7292 = VECTOR('',#7293,1.); +#7293 = DIRECTION('',(7.911630099815E-02,0.,0.996865392576)); +#7294 = PLANE('',#7295); +#7295 = AXIS2_PLACEMENT_3D('',#7296,#7297,#7298); +#7296 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7297 = DIRECTION('',(-0.996865392576,0.,7.911630099815E-02)); +#7298 = DIRECTION('',(7.911630099815E-02,0.,0.996865392576)); +#7299 = ADVANCED_FACE('',(#7300),#7373,.F.); +#7300 = FACE_BOUND('',#7301,.F.); +#7301 = EDGE_LOOP('',(#7302,#7312,#7320,#7328,#7334,#7335,#7343,#7351, + #7359,#7367)); +#7302 = ORIENTED_EDGE('',*,*,#7303,.F.); +#7303 = EDGE_CURVE('',#7304,#7306,#7308,.T.); +#7304 = VERTEX_POINT('',#7305); +#7305 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7306 = VERTEX_POINT('',#7307); +#7307 = CARTESIAN_POINT('',(-0.725,-0.4,3.E-02)); +#7308 = LINE('',#7309,#7310); +#7309 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7310 = VECTOR('',#7311,1.); +#7311 = DIRECTION('',(1.,0.,0.)); +#7312 = ORIENTED_EDGE('',*,*,#7313,.T.); +#7313 = EDGE_CURVE('',#7304,#7314,#7316,.T.); +#7314 = VERTEX_POINT('',#7315); +#7315 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7316 = LINE('',#7317,#7318); +#7317 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7318 = VECTOR('',#7319,1.); +#7319 = DIRECTION('',(0.,0.,1.)); +#7320 = ORIENTED_EDGE('',*,*,#7321,.T.); +#7321 = EDGE_CURVE('',#7314,#7322,#7324,.T.); +#7322 = VERTEX_POINT('',#7323); +#7323 = CARTESIAN_POINT('',(-0.725,-0.4,0.47)); +#7324 = LINE('',#7325,#7326); +#7325 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7326 = VECTOR('',#7327,1.); +#7327 = DIRECTION('',(1.,0.,0.)); +#7328 = ORIENTED_EDGE('',*,*,#7329,.T.); +#7329 = EDGE_CURVE('',#7322,#7217,#7330,.T.); +#7330 = LINE('',#7331,#7332); +#7331 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7332 = VECTOR('',#7333,1.); +#7333 = DIRECTION('',(1.,0.,0.)); +#7334 = ORIENTED_EDGE('',*,*,#7242,.F.); +#7335 = ORIENTED_EDGE('',*,*,#7336,.T.); +#7336 = EDGE_CURVE('',#7235,#7337,#7339,.T.); +#7337 = VERTEX_POINT('',#7338); +#7338 = CARTESIAN_POINT('',(0.725,-0.4,0.47)); +#7339 = LINE('',#7340,#7341); +#7340 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7341 = VECTOR('',#7342,1.); +#7342 = DIRECTION('',(1.,0.,0.)); +#7343 = ORIENTED_EDGE('',*,*,#7344,.T.); +#7344 = EDGE_CURVE('',#7337,#7345,#7347,.T.); +#7345 = VERTEX_POINT('',#7346); +#7346 = CARTESIAN_POINT('',(0.77,-0.4,0.47)); +#7347 = LINE('',#7348,#7349); +#7348 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7349 = VECTOR('',#7350,1.); +#7350 = DIRECTION('',(1.,0.,0.)); +#7351 = ORIENTED_EDGE('',*,*,#7352,.F.); +#7352 = EDGE_CURVE('',#7353,#7345,#7355,.T.); +#7353 = VERTEX_POINT('',#7354); +#7354 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02)); +#7355 = LINE('',#7356,#7357); +#7356 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02)); +#7357 = VECTOR('',#7358,1.); +#7358 = DIRECTION('',(0.,0.,1.)); +#7359 = ORIENTED_EDGE('',*,*,#7360,.F.); +#7360 = EDGE_CURVE('',#7361,#7353,#7363,.T.); +#7361 = VERTEX_POINT('',#7362); +#7362 = CARTESIAN_POINT('',(0.725,-0.4,3.E-02)); +#7363 = LINE('',#7364,#7365); +#7364 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7365 = VECTOR('',#7366,1.); +#7366 = DIRECTION('',(1.,0.,0.)); +#7367 = ORIENTED_EDGE('',*,*,#7368,.F.); +#7368 = EDGE_CURVE('',#7306,#7361,#7369,.T.); +#7369 = LINE('',#7370,#7371); +#7370 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7371 = VECTOR('',#7372,1.); +#7372 = DIRECTION('',(1.,0.,0.)); +#7373 = PLANE('',#7374); +#7374 = AXIS2_PLACEMENT_3D('',#7375,#7376,#7377); +#7375 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7376 = DIRECTION('',(0.,1.,0.)); +#7377 = DIRECTION('',(0.,-0.,1.)); +#7378 = ADVANCED_FACE('',(#7379),#7397,.T.); +#7379 = FACE_BOUND('',#7380,.T.); +#7380 = EDGE_LOOP('',(#7381,#7382,#7383,#7391)); +#7381 = ORIENTED_EDGE('',*,*,#7281,.T.); +#7382 = ORIENTED_EDGE('',*,*,#7226,.T.); +#7383 = ORIENTED_EDGE('',*,*,#7384,.F.); +#7384 = EDGE_CURVE('',#7385,#7227,#7387,.T.); +#7385 = VERTEX_POINT('',#7386); +#7386 = CARTESIAN_POINT('',(0.45,0.4,1.1)); +#7387 = LINE('',#7388,#7389); +#7388 = CARTESIAN_POINT('',(0.45,0.4,1.1)); +#7389 = VECTOR('',#7390,1.); +#7390 = DIRECTION('',(0.,-1.,0.)); +#7391 = ORIENTED_EDGE('',*,*,#7392,.F.); +#7392 = EDGE_CURVE('',#7282,#7385,#7393,.T.); +#7393 = LINE('',#7394,#7395); +#7394 = CARTESIAN_POINT('',(-0.45,0.4,1.1)); +#7395 = VECTOR('',#7396,1.); +#7396 = DIRECTION('',(1.,0.,0.)); +#7397 = PLANE('',#7398); +#7398 = AXIS2_PLACEMENT_3D('',#7399,#7400,#7401); +#7399 = CARTESIAN_POINT('',(-0.45,0.4,1.1)); +#7400 = DIRECTION('',(0.,0.,1.)); +#7401 = DIRECTION('',(1.,0.,-0.)); +#7402 = ADVANCED_FACE('',(#7403),#7437,.T.); +#7403 = FACE_BOUND('',#7404,.T.); +#7404 = EDGE_LOOP('',(#7405,#7406,#7407,#7415,#7423,#7431)); +#7405 = ORIENTED_EDGE('',*,*,#7384,.T.); +#7406 = ORIENTED_EDGE('',*,*,#7234,.T.); +#7407 = ORIENTED_EDGE('',*,*,#7408,.F.); +#7408 = EDGE_CURVE('',#7409,#7235,#7411,.T.); +#7409 = VERTEX_POINT('',#7410); +#7410 = CARTESIAN_POINT('',(0.5,-0.3,0.47)); +#7411 = LINE('',#7412,#7413); +#7412 = CARTESIAN_POINT('',(0.5,0.4,0.47)); +#7413 = VECTOR('',#7414,1.); +#7414 = DIRECTION('',(0.,-1.,0.)); +#7415 = ORIENTED_EDGE('',*,*,#7416,.T.); +#7416 = EDGE_CURVE('',#7409,#7417,#7419,.T.); +#7417 = VERTEX_POINT('',#7418); +#7418 = CARTESIAN_POINT('',(0.5,0.3,0.47)); +#7419 = LINE('',#7420,#7421); +#7420 = CARTESIAN_POINT('',(0.5,-0.4,0.47)); +#7421 = VECTOR('',#7422,1.); +#7422 = DIRECTION('',(0.,1.,0.)); +#7423 = ORIENTED_EDGE('',*,*,#7424,.F.); +#7424 = EDGE_CURVE('',#7425,#7417,#7427,.T.); +#7425 = VERTEX_POINT('',#7426); +#7426 = CARTESIAN_POINT('',(0.5,0.4,0.47)); +#7427 = LINE('',#7428,#7429); +#7428 = CARTESIAN_POINT('',(0.5,0.4,0.47)); +#7429 = VECTOR('',#7430,1.); +#7430 = DIRECTION('',(0.,-1.,0.)); +#7431 = ORIENTED_EDGE('',*,*,#7432,.F.); +#7432 = EDGE_CURVE('',#7385,#7425,#7433,.T.); +#7433 = LINE('',#7434,#7435); +#7434 = CARTESIAN_POINT('',(0.45,0.4,1.1)); +#7435 = VECTOR('',#7436,1.); +#7436 = DIRECTION('',(7.911630099815E-02,0.,-0.996865392576)); +#7437 = PLANE('',#7438); +#7438 = AXIS2_PLACEMENT_3D('',#7439,#7440,#7441); +#7439 = CARTESIAN_POINT('',(0.45,0.4,1.1)); +#7440 = DIRECTION('',(0.996865392576,0.,7.911630099815E-02)); +#7441 = DIRECTION('',(7.911630099815E-02,0.,-0.996865392576)); +#7442 = ADVANCED_FACE('',(#7443),#7468,.T.); +#7443 = FACE_BOUND('',#7444,.T.); +#7444 = EDGE_LOOP('',(#7445,#7453,#7461,#7467)); +#7445 = ORIENTED_EDGE('',*,*,#7446,.F.); +#7446 = EDGE_CURVE('',#7447,#7257,#7449,.T.); +#7447 = VERTEX_POINT('',#7448); +#7448 = CARTESIAN_POINT('',(-0.725,0.4,0.47)); +#7449 = LINE('',#7450,#7451); +#7450 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7451 = VECTOR('',#7452,1.); +#7452 = DIRECTION('',(1.,0.,0.)); +#7453 = ORIENTED_EDGE('',*,*,#7454,.F.); +#7454 = EDGE_CURVE('',#7455,#7447,#7457,.T.); +#7455 = VERTEX_POINT('',#7456); +#7456 = CARTESIAN_POINT('',(-0.725,0.3,0.47)); +#7457 = LINE('',#7458,#7459); +#7458 = CARTESIAN_POINT('',(-0.725,5.E-02,0.47)); +#7459 = VECTOR('',#7460,1.); +#7460 = DIRECTION('',(0.,1.,0.)); +#7461 = ORIENTED_EDGE('',*,*,#7462,.F.); +#7462 = EDGE_CURVE('',#7259,#7455,#7463,.T.); +#7463 = LINE('',#7464,#7465); +#7464 = CARTESIAN_POINT('',(-0.7475,0.3,0.47)); +#7465 = VECTOR('',#7466,1.); +#7466 = DIRECTION('',(-1.,0.,0.)); +#7467 = ORIENTED_EDGE('',*,*,#7256,.F.); +#7468 = PLANE('',#7469); +#7469 = AXIS2_PLACEMENT_3D('',#7470,#7471,#7472); +#7470 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7471 = DIRECTION('',(0.,0.,1.)); +#7472 = DIRECTION('',(1.,0.,-0.)); +#7473 = ADVANCED_FACE('',(#7474),#7485,.T.); +#7474 = FACE_BOUND('',#7475,.T.); +#7475 = EDGE_LOOP('',(#7476,#7477,#7478,#7479)); +#7476 = ORIENTED_EDGE('',*,*,#7289,.T.); +#7477 = ORIENTED_EDGE('',*,*,#7392,.T.); +#7478 = ORIENTED_EDGE('',*,*,#7432,.T.); +#7479 = ORIENTED_EDGE('',*,*,#7480,.T.); +#7480 = EDGE_CURVE('',#7425,#7257,#7481,.T.); +#7481 = LINE('',#7482,#7483); +#7482 = CARTESIAN_POINT('',(0.5,0.4,0.47)); +#7483 = VECTOR('',#7484,1.); +#7484 = DIRECTION('',(-1.,0.,0.)); +#7485 = PLANE('',#7486); +#7486 = AXIS2_PLACEMENT_3D('',#7487,#7488,#7489); +#7487 = CARTESIAN_POINT('',(-8.772411109409E-18,0.4,0.775044128294)); +#7488 = DIRECTION('',(0.,1.,0.)); +#7489 = DIRECTION('',(0.,-0.,1.)); +#7490 = ADVANCED_FACE('',(#7491),#7518,.T.); +#7491 = FACE_BOUND('',#7492,.T.); +#7492 = EDGE_LOOP('',(#7493,#7502,#7510,#7517)); +#7493 = ORIENTED_EDGE('',*,*,#7494,.F.); +#7494 = EDGE_CURVE('',#7495,#7259,#7497,.T.); +#7495 = VERTEX_POINT('',#7496); +#7496 = CARTESIAN_POINT('',(-0.53,0.3,0.5)); +#7497 = CIRCLE('',#7498,3.E-02); +#7498 = AXIS2_PLACEMENT_3D('',#7499,#7500,#7501); +#7499 = CARTESIAN_POINT('',(-0.53,0.3,0.47)); +#7500 = DIRECTION('',(-0.,1.,0.)); +#7501 = DIRECTION('',(1.,0.,0.)); +#7502 = ORIENTED_EDGE('',*,*,#7503,.F.); +#7503 = EDGE_CURVE('',#7504,#7495,#7506,.T.); +#7504 = VERTEX_POINT('',#7505); +#7505 = CARTESIAN_POINT('',(-0.53,-0.3,0.5)); +#7506 = LINE('',#7507,#7508); +#7507 = CARTESIAN_POINT('',(-0.53,-0.4,0.5)); +#7508 = VECTOR('',#7509,1.); +#7509 = DIRECTION('',(0.,1.,0.)); +#7510 = ORIENTED_EDGE('',*,*,#7511,.T.); +#7511 = EDGE_CURVE('',#7504,#7267,#7512,.T.); +#7512 = CIRCLE('',#7513,3.E-02); +#7513 = AXIS2_PLACEMENT_3D('',#7514,#7515,#7516); +#7514 = CARTESIAN_POINT('',(-0.53,-0.3,0.47)); +#7515 = DIRECTION('',(-0.,1.,0.)); +#7516 = DIRECTION('',(1.,0.,0.)); +#7517 = ORIENTED_EDGE('',*,*,#7266,.T.); +#7518 = CYLINDRICAL_SURFACE('',#7519,3.E-02); +#7519 = AXIS2_PLACEMENT_3D('',#7520,#7521,#7522); +#7520 = CARTESIAN_POINT('',(-0.53,-0.4,0.47)); +#7521 = DIRECTION('',(0.,1.,0.)); +#7522 = DIRECTION('',(1.,0.,0.)); +#7523 = ADVANCED_FACE('',(#7524),#7542,.T.); +#7524 = FACE_BOUND('',#7525,.T.); +#7525 = EDGE_LOOP('',(#7526,#7534,#7535,#7536)); +#7526 = ORIENTED_EDGE('',*,*,#7527,.F.); +#7527 = EDGE_CURVE('',#7322,#7528,#7530,.T.); +#7528 = VERTEX_POINT('',#7529); +#7529 = CARTESIAN_POINT('',(-0.725,-0.3,0.47)); +#7530 = LINE('',#7531,#7532); +#7531 = CARTESIAN_POINT('',(-0.725,-0.35,0.47)); +#7532 = VECTOR('',#7533,1.); +#7533 = DIRECTION('',(0.,1.,0.)); +#7534 = ORIENTED_EDGE('',*,*,#7329,.T.); +#7535 = ORIENTED_EDGE('',*,*,#7274,.F.); +#7536 = ORIENTED_EDGE('',*,*,#7537,.F.); +#7537 = EDGE_CURVE('',#7528,#7267,#7538,.T.); +#7538 = LINE('',#7539,#7540); +#7539 = CARTESIAN_POINT('',(-2.25E-02,-0.3,0.47)); +#7540 = VECTOR('',#7541,1.); +#7541 = DIRECTION('',(1.,0.,0.)); +#7542 = PLANE('',#7543); +#7543 = AXIS2_PLACEMENT_3D('',#7544,#7545,#7546); +#7544 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7545 = DIRECTION('',(0.,0.,1.)); +#7546 = DIRECTION('',(1.,0.,-0.)); +#7547 = ADVANCED_FACE('',(#7548),#7609,.F.); +#7548 = FACE_BOUND('',#7549,.F.); +#7549 = EDGE_LOOP('',(#7550,#7560,#7569,#7577,#7586,#7594,#7600,#7601, + #7602,#7603)); +#7550 = ORIENTED_EDGE('',*,*,#7551,.F.); +#7551 = EDGE_CURVE('',#7552,#7554,#7556,.T.); +#7552 = VERTEX_POINT('',#7553); +#7553 = CARTESIAN_POINT('',(-0.77,-0.4,-3.469446951954E-18)); +#7554 = VERTEX_POINT('',#7555); +#7555 = CARTESIAN_POINT('',(-0.725,-0.4,0.)); +#7556 = LINE('',#7557,#7558); +#7557 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#7558 = VECTOR('',#7559,1.); +#7559 = DIRECTION('',(1.,0.,0.)); +#7560 = ORIENTED_EDGE('',*,*,#7561,.F.); +#7561 = EDGE_CURVE('',#7562,#7552,#7564,.T.); +#7562 = VERTEX_POINT('',#7563); +#7563 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#7564 = CIRCLE('',#7565,3.E-02); +#7565 = AXIS2_PLACEMENT_3D('',#7566,#7567,#7568); +#7566 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7567 = DIRECTION('',(0.,-1.,0.)); +#7568 = DIRECTION('',(0.,0.,1.)); +#7569 = ORIENTED_EDGE('',*,*,#7570,.T.); +#7570 = EDGE_CURVE('',#7562,#7571,#7573,.T.); +#7571 = VERTEX_POINT('',#7572); +#7572 = CARTESIAN_POINT('',(-0.8,-0.4,0.47)); +#7573 = LINE('',#7574,#7575); +#7574 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#7575 = VECTOR('',#7576,1.); +#7576 = DIRECTION('',(0.,0.,1.)); +#7577 = ORIENTED_EDGE('',*,*,#7578,.T.); +#7578 = EDGE_CURVE('',#7571,#7579,#7581,.T.); +#7579 = VERTEX_POINT('',#7580); +#7580 = CARTESIAN_POINT('',(-0.77,-0.4,0.5)); +#7581 = CIRCLE('',#7582,3.E-02); +#7582 = AXIS2_PLACEMENT_3D('',#7583,#7584,#7585); +#7583 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7584 = DIRECTION('',(0.,1.,0.)); +#7585 = DIRECTION('',(0.,-0.,1.)); +#7586 = ORIENTED_EDGE('',*,*,#7587,.T.); +#7587 = EDGE_CURVE('',#7579,#7588,#7590,.T.); +#7588 = VERTEX_POINT('',#7589); +#7589 = CARTESIAN_POINT('',(-0.725,-0.4,0.5)); +#7590 = LINE('',#7591,#7592); +#7591 = CARTESIAN_POINT('',(-0.8,-0.4,0.5)); +#7592 = VECTOR('',#7593,1.); +#7593 = DIRECTION('',(1.,0.,0.)); +#7594 = ORIENTED_EDGE('',*,*,#7595,.F.); +#7595 = EDGE_CURVE('',#7322,#7588,#7596,.T.); +#7596 = LINE('',#7597,#7598); +#7597 = CARTESIAN_POINT('',(-0.725,-0.4,0.375)); +#7598 = VECTOR('',#7599,1.); +#7599 = DIRECTION('',(0.,0.,1.)); +#7600 = ORIENTED_EDGE('',*,*,#7321,.F.); +#7601 = ORIENTED_EDGE('',*,*,#7313,.F.); +#7602 = ORIENTED_EDGE('',*,*,#7303,.T.); +#7603 = ORIENTED_EDGE('',*,*,#7604,.F.); +#7604 = EDGE_CURVE('',#7554,#7306,#7605,.T.); +#7605 = LINE('',#7606,#7607); +#7606 = CARTESIAN_POINT('',(-0.725,-0.4,0.375)); +#7607 = VECTOR('',#7608,1.); +#7608 = DIRECTION('',(0.,0.,1.)); +#7609 = PLANE('',#7610); +#7610 = AXIS2_PLACEMENT_3D('',#7611,#7612,#7613); +#7611 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#7612 = DIRECTION('',(0.,1.,0.)); +#7613 = DIRECTION('',(0.,-0.,1.)); +#7614 = ADVANCED_FACE('',(#7615,#7704),#7730,.F.); +#7615 = FACE_BOUND('',#7616,.F.); +#7616 = EDGE_LOOP('',(#7617,#7625,#7626,#7634,#7642,#7650,#7658,#7666, + #7674,#7682,#7690,#7698)); +#7617 = ORIENTED_EDGE('',*,*,#7618,.F.); +#7618 = EDGE_CURVE('',#7306,#7619,#7621,.T.); +#7619 = VERTEX_POINT('',#7620); +#7620 = CARTESIAN_POINT('',(-0.725,-0.3,3.E-02)); +#7621 = LINE('',#7622,#7623); +#7622 = CARTESIAN_POINT('',(-0.725,-0.35,3.E-02)); +#7623 = VECTOR('',#7624,1.); +#7624 = DIRECTION('',(0.,1.,0.)); +#7625 = ORIENTED_EDGE('',*,*,#7368,.T.); +#7626 = ORIENTED_EDGE('',*,*,#7627,.F.); +#7627 = EDGE_CURVE('',#7628,#7361,#7630,.T.); +#7628 = VERTEX_POINT('',#7629); +#7629 = CARTESIAN_POINT('',(0.725,-0.3,3.E-02)); +#7630 = LINE('',#7631,#7632); +#7631 = CARTESIAN_POINT('',(0.725,-0.45,3.E-02)); +#7632 = VECTOR('',#7633,1.); +#7633 = DIRECTION('',(0.,-1.,0.)); +#7634 = ORIENTED_EDGE('',*,*,#7635,.F.); +#7635 = EDGE_CURVE('',#7636,#7628,#7638,.T.); +#7636 = VERTEX_POINT('',#7637); +#7637 = CARTESIAN_POINT('',(0.5,-0.3,3.E-02)); +#7638 = LINE('',#7639,#7640); +#7639 = CARTESIAN_POINT('',(-2.25E-02,-0.3,3.E-02)); +#7640 = VECTOR('',#7641,1.); +#7641 = DIRECTION('',(1.,0.,0.)); +#7642 = ORIENTED_EDGE('',*,*,#7643,.T.); +#7643 = EDGE_CURVE('',#7636,#7644,#7646,.T.); +#7644 = VERTEX_POINT('',#7645); +#7645 = CARTESIAN_POINT('',(0.5,0.3,3.E-02)); +#7646 = LINE('',#7647,#7648); +#7647 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#7648 = VECTOR('',#7649,1.); +#7649 = DIRECTION('',(0.,1.,0.)); +#7650 = ORIENTED_EDGE('',*,*,#7651,.F.); +#7651 = EDGE_CURVE('',#7652,#7644,#7654,.T.); +#7652 = VERTEX_POINT('',#7653); +#7653 = CARTESIAN_POINT('',(0.725,0.3,3.E-02)); +#7654 = LINE('',#7655,#7656); +#7655 = CARTESIAN_POINT('',(-0.7475,0.3,3.E-02)); +#7656 = VECTOR('',#7657,1.); +#7657 = DIRECTION('',(-1.,0.,0.)); +#7658 = ORIENTED_EDGE('',*,*,#7659,.F.); +#7659 = EDGE_CURVE('',#7660,#7652,#7662,.T.); +#7660 = VERTEX_POINT('',#7661); +#7661 = CARTESIAN_POINT('',(0.725,0.4,3.E-02)); +#7662 = LINE('',#7663,#7664); +#7663 = CARTESIAN_POINT('',(0.725,-5.E-02,3.E-02)); +#7664 = VECTOR('',#7665,1.); +#7665 = DIRECTION('',(0.,-1.,0.)); +#7666 = ORIENTED_EDGE('',*,*,#7667,.F.); +#7667 = EDGE_CURVE('',#7668,#7660,#7670,.T.); +#7668 = VERTEX_POINT('',#7669); +#7669 = CARTESIAN_POINT('',(-0.725,0.4,3.E-02)); +#7670 = LINE('',#7671,#7672); +#7671 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7672 = VECTOR('',#7673,1.); +#7673 = DIRECTION('',(1.,0.,0.)); +#7674 = ORIENTED_EDGE('',*,*,#7675,.F.); +#7675 = EDGE_CURVE('',#7676,#7668,#7678,.T.); +#7676 = VERTEX_POINT('',#7677); +#7677 = CARTESIAN_POINT('',(-0.725,0.3,3.E-02)); +#7678 = LINE('',#7679,#7680); +#7679 = CARTESIAN_POINT('',(-0.725,5.E-02,3.E-02)); +#7680 = VECTOR('',#7681,1.); +#7681 = DIRECTION('',(0.,1.,0.)); +#7682 = ORIENTED_EDGE('',*,*,#7683,.F.); +#7683 = EDGE_CURVE('',#7684,#7676,#7686,.T.); +#7684 = VERTEX_POINT('',#7685); +#7685 = CARTESIAN_POINT('',(-0.5,0.3,3.E-02)); +#7686 = LINE('',#7687,#7688); +#7687 = CARTESIAN_POINT('',(-0.7475,0.3,3.E-02)); +#7688 = VECTOR('',#7689,1.); +#7689 = DIRECTION('',(-1.,0.,0.)); +#7690 = ORIENTED_EDGE('',*,*,#7691,.F.); +#7691 = EDGE_CURVE('',#7692,#7684,#7694,.T.); +#7692 = VERTEX_POINT('',#7693); +#7693 = CARTESIAN_POINT('',(-0.5,-0.3,3.E-02)); +#7694 = LINE('',#7695,#7696); +#7695 = CARTESIAN_POINT('',(-0.5,-0.4,3.E-02)); +#7696 = VECTOR('',#7697,1.); +#7697 = DIRECTION('',(0.,1.,0.)); +#7698 = ORIENTED_EDGE('',*,*,#7699,.F.); +#7699 = EDGE_CURVE('',#7619,#7692,#7700,.T.); +#7700 = LINE('',#7701,#7702); +#7701 = CARTESIAN_POINT('',(-2.25E-02,-0.3,3.E-02)); +#7702 = VECTOR('',#7703,1.); +#7703 = DIRECTION('',(1.,0.,0.)); +#7704 = FACE_BOUND('',#7705,.F.); +#7705 = EDGE_LOOP('',(#7706,#7716,#7724)); +#7706 = ORIENTED_EDGE('',*,*,#7707,.T.); +#7707 = EDGE_CURVE('',#7708,#7710,#7712,.T.); +#7708 = VERTEX_POINT('',#7709); +#7709 = CARTESIAN_POINT('',(0.277128129211,0.32,3.E-02)); +#7710 = VERTEX_POINT('',#7711); +#7711 = CARTESIAN_POINT('',(0.277128129211,-0.32,3.E-02)); +#7712 = LINE('',#7713,#7714); +#7713 = CARTESIAN_POINT('',(0.277128129211,0.32,3.E-02)); +#7714 = VECTOR('',#7715,1.); +#7715 = DIRECTION('',(0.,-1.,0.)); +#7716 = ORIENTED_EDGE('',*,*,#7717,.T.); +#7717 = EDGE_CURVE('',#7710,#7718,#7720,.T.); +#7718 = VERTEX_POINT('',#7719); +#7719 = CARTESIAN_POINT('',(-0.277128129211,0.,3.E-02)); +#7720 = LINE('',#7721,#7722); +#7721 = CARTESIAN_POINT('',(0.277128129211,-0.32,3.E-02)); +#7722 = VECTOR('',#7723,1.); +#7723 = DIRECTION('',(-0.866025403784,0.5,0.)); +#7724 = ORIENTED_EDGE('',*,*,#7725,.T.); +#7725 = EDGE_CURVE('',#7718,#7708,#7726,.T.); +#7726 = LINE('',#7727,#7728); +#7727 = CARTESIAN_POINT('',(-0.277128129211,0.,3.E-02)); +#7728 = VECTOR('',#7729,1.); +#7729 = DIRECTION('',(0.866025403784,0.5,0.)); +#7730 = PLANE('',#7731); +#7731 = AXIS2_PLACEMENT_3D('',#7732,#7733,#7734); +#7732 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7733 = DIRECTION('',(0.,0.,1.)); +#7734 = DIRECTION('',(1.,0.,-0.)); +#7735 = ADVANCED_FACE('',(#7736),#7797,.F.); +#7736 = FACE_BOUND('',#7737,.F.); +#7737 = EDGE_LOOP('',(#7738,#7748,#7754,#7755,#7756,#7757,#7765,#7773, + #7782,#7790)); +#7738 = ORIENTED_EDGE('',*,*,#7739,.F.); +#7739 = EDGE_CURVE('',#7740,#7742,#7744,.T.); +#7740 = VERTEX_POINT('',#7741); +#7741 = CARTESIAN_POINT('',(0.725,-0.4,0.)); +#7742 = VERTEX_POINT('',#7743); +#7743 = CARTESIAN_POINT('',(0.77,-0.4,-3.469446951954E-18)); +#7744 = LINE('',#7745,#7746); +#7745 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#7746 = VECTOR('',#7747,1.); +#7747 = DIRECTION('',(1.,0.,0.)); +#7748 = ORIENTED_EDGE('',*,*,#7749,.F.); +#7749 = EDGE_CURVE('',#7361,#7740,#7750,.T.); +#7750 = LINE('',#7751,#7752); +#7751 = CARTESIAN_POINT('',(0.725,-0.4,0.375)); +#7752 = VECTOR('',#7753,1.); +#7753 = DIRECTION('',(0.,0.,-1.)); +#7754 = ORIENTED_EDGE('',*,*,#7360,.T.); +#7755 = ORIENTED_EDGE('',*,*,#7352,.T.); +#7756 = ORIENTED_EDGE('',*,*,#7344,.F.); +#7757 = ORIENTED_EDGE('',*,*,#7758,.F.); +#7758 = EDGE_CURVE('',#7759,#7337,#7761,.T.); +#7759 = VERTEX_POINT('',#7760); +#7760 = CARTESIAN_POINT('',(0.725,-0.4,0.5)); +#7761 = LINE('',#7762,#7763); +#7762 = CARTESIAN_POINT('',(0.725,-0.4,0.375)); +#7763 = VECTOR('',#7764,1.); +#7764 = DIRECTION('',(0.,0.,-1.)); +#7765 = ORIENTED_EDGE('',*,*,#7766,.T.); +#7766 = EDGE_CURVE('',#7759,#7767,#7769,.T.); +#7767 = VERTEX_POINT('',#7768); +#7768 = CARTESIAN_POINT('',(0.77,-0.4,0.5)); +#7769 = LINE('',#7770,#7771); +#7770 = CARTESIAN_POINT('',(0.5,-0.4,0.5)); +#7771 = VECTOR('',#7772,1.); +#7772 = DIRECTION('',(1.,0.,0.)); +#7773 = ORIENTED_EDGE('',*,*,#7774,.F.); +#7774 = EDGE_CURVE('',#7775,#7767,#7777,.T.); +#7775 = VERTEX_POINT('',#7776); +#7776 = CARTESIAN_POINT('',(0.8,-0.4,0.47)); +#7777 = CIRCLE('',#7778,3.E-02); +#7778 = AXIS2_PLACEMENT_3D('',#7779,#7780,#7781); +#7779 = CARTESIAN_POINT('',(0.77,-0.4,0.47)); +#7780 = DIRECTION('',(0.,-1.,0.)); +#7781 = DIRECTION('',(0.,0.,1.)); +#7782 = ORIENTED_EDGE('',*,*,#7783,.F.); +#7783 = EDGE_CURVE('',#7784,#7775,#7786,.T.); +#7784 = VERTEX_POINT('',#7785); +#7785 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#7786 = LINE('',#7787,#7788); +#7787 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#7788 = VECTOR('',#7789,1.); +#7789 = DIRECTION('',(0.,0.,1.)); +#7790 = ORIENTED_EDGE('',*,*,#7791,.T.); +#7791 = EDGE_CURVE('',#7784,#7742,#7792,.T.); +#7792 = CIRCLE('',#7793,3.E-02); +#7793 = AXIS2_PLACEMENT_3D('',#7794,#7795,#7796); +#7794 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02)); +#7795 = DIRECTION('',(0.,1.,0.)); +#7796 = DIRECTION('',(0.,-0.,1.)); +#7797 = PLANE('',#7798); +#7798 = AXIS2_PLACEMENT_3D('',#7799,#7800,#7801); +#7799 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#7800 = DIRECTION('',(0.,1.,0.)); +#7801 = DIRECTION('',(0.,-0.,1.)); +#7802 = ADVANCED_FACE('',(#7803),#7821,.T.); +#7803 = FACE_BOUND('',#7804,.T.); +#7804 = EDGE_LOOP('',(#7805,#7813,#7814,#7815)); +#7805 = ORIENTED_EDGE('',*,*,#7806,.F.); +#7806 = EDGE_CURVE('',#7409,#7807,#7809,.T.); +#7807 = VERTEX_POINT('',#7808); +#7808 = CARTESIAN_POINT('',(0.725,-0.3,0.47)); +#7809 = LINE('',#7810,#7811); +#7810 = CARTESIAN_POINT('',(-2.25E-02,-0.3,0.47)); +#7811 = VECTOR('',#7812,1.); +#7812 = DIRECTION('',(1.,0.,0.)); +#7813 = ORIENTED_EDGE('',*,*,#7408,.T.); +#7814 = ORIENTED_EDGE('',*,*,#7336,.T.); +#7815 = ORIENTED_EDGE('',*,*,#7816,.F.); +#7816 = EDGE_CURVE('',#7807,#7337,#7817,.T.); +#7817 = LINE('',#7818,#7819); +#7818 = CARTESIAN_POINT('',(0.725,-0.45,0.47)); +#7819 = VECTOR('',#7820,1.); +#7820 = DIRECTION('',(0.,-1.,0.)); +#7821 = PLANE('',#7822); +#7822 = AXIS2_PLACEMENT_3D('',#7823,#7824,#7825); +#7823 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7824 = DIRECTION('',(0.,0.,1.)); +#7825 = DIRECTION('',(1.,0.,-0.)); +#7826 = ADVANCED_FACE('',(#7827),#7852,.T.); +#7827 = FACE_BOUND('',#7828,.T.); +#7828 = EDGE_LOOP('',(#7829,#7837,#7838,#7846)); +#7829 = ORIENTED_EDGE('',*,*,#7830,.F.); +#7830 = EDGE_CURVE('',#7425,#7831,#7833,.T.); +#7831 = VERTEX_POINT('',#7832); +#7832 = CARTESIAN_POINT('',(0.725,0.4,0.47)); +#7833 = LINE('',#7834,#7835); +#7834 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7835 = VECTOR('',#7836,1.); +#7836 = DIRECTION('',(1.,0.,0.)); +#7837 = ORIENTED_EDGE('',*,*,#7424,.T.); +#7838 = ORIENTED_EDGE('',*,*,#7839,.F.); +#7839 = EDGE_CURVE('',#7840,#7417,#7842,.T.); +#7840 = VERTEX_POINT('',#7841); +#7841 = CARTESIAN_POINT('',(0.725,0.3,0.47)); +#7842 = LINE('',#7843,#7844); +#7843 = CARTESIAN_POINT('',(-0.7475,0.3,0.47)); +#7844 = VECTOR('',#7845,1.); +#7845 = DIRECTION('',(-1.,0.,0.)); +#7846 = ORIENTED_EDGE('',*,*,#7847,.F.); +#7847 = EDGE_CURVE('',#7831,#7840,#7848,.T.); +#7848 = LINE('',#7849,#7850); +#7849 = CARTESIAN_POINT('',(0.725,-5.E-02,0.47)); +#7850 = VECTOR('',#7851,1.); +#7851 = DIRECTION('',(0.,-1.,0.)); +#7852 = PLANE('',#7853); +#7853 = AXIS2_PLACEMENT_3D('',#7854,#7855,#7856); +#7854 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7855 = DIRECTION('',(0.,0.,1.)); +#7856 = DIRECTION('',(1.,0.,-0.)); +#7857 = ADVANCED_FACE('',(#7858),#7885,.T.); +#7858 = FACE_BOUND('',#7859,.T.); +#7859 = EDGE_LOOP('',(#7860,#7861,#7870,#7878)); +#7860 = ORIENTED_EDGE('',*,*,#7416,.F.); +#7861 = ORIENTED_EDGE('',*,*,#7862,.T.); +#7862 = EDGE_CURVE('',#7409,#7863,#7865,.T.); +#7863 = VERTEX_POINT('',#7864); +#7864 = CARTESIAN_POINT('',(0.53,-0.3,0.5)); +#7865 = CIRCLE('',#7866,3.E-02); +#7866 = AXIS2_PLACEMENT_3D('',#7867,#7868,#7869); +#7867 = CARTESIAN_POINT('',(0.53,-0.3,0.47)); +#7868 = DIRECTION('',(0.,1.,-0.)); +#7869 = DIRECTION('',(-1.,0.,0.)); +#7870 = ORIENTED_EDGE('',*,*,#7871,.T.); +#7871 = EDGE_CURVE('',#7863,#7872,#7874,.T.); +#7872 = VERTEX_POINT('',#7873); +#7873 = CARTESIAN_POINT('',(0.53,0.3,0.5)); +#7874 = LINE('',#7875,#7876); +#7875 = CARTESIAN_POINT('',(0.53,-0.4,0.5)); +#7876 = VECTOR('',#7877,1.); +#7877 = DIRECTION('',(0.,1.,0.)); +#7878 = ORIENTED_EDGE('',*,*,#7879,.F.); +#7879 = EDGE_CURVE('',#7417,#7872,#7880,.T.); +#7880 = CIRCLE('',#7881,3.E-02); +#7881 = AXIS2_PLACEMENT_3D('',#7882,#7883,#7884); +#7882 = CARTESIAN_POINT('',(0.53,0.3,0.47)); +#7883 = DIRECTION('',(0.,1.,-0.)); +#7884 = DIRECTION('',(-1.,0.,0.)); +#7885 = CYLINDRICAL_SURFACE('',#7886,3.E-02); +#7886 = AXIS2_PLACEMENT_3D('',#7887,#7888,#7889); +#7887 = CARTESIAN_POINT('',(0.53,-0.4,0.47)); +#7888 = DIRECTION('',(0.,1.,0.)); +#7889 = DIRECTION('',(-1.,0.,0.)); +#7890 = ADVANCED_FACE('',(#7891),#7941,.T.); +#7891 = FACE_BOUND('',#7892,.T.); +#7892 = EDGE_LOOP('',(#7893,#7901,#7909,#7915,#7916,#7917,#7918,#7926, + #7934,#7940)); +#7893 = ORIENTED_EDGE('',*,*,#7894,.F.); +#7894 = EDGE_CURVE('',#7895,#7668,#7897,.T.); +#7895 = VERTEX_POINT('',#7896); +#7896 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7897 = LINE('',#7898,#7899); +#7898 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7899 = VECTOR('',#7900,1.); +#7900 = DIRECTION('',(1.,0.,0.)); +#7901 = ORIENTED_EDGE('',*,*,#7902,.T.); +#7902 = EDGE_CURVE('',#7895,#7903,#7905,.T.); +#7903 = VERTEX_POINT('',#7904); +#7904 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7905 = LINE('',#7906,#7907); +#7906 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7907 = VECTOR('',#7908,1.); +#7908 = DIRECTION('',(0.,0.,1.)); +#7909 = ORIENTED_EDGE('',*,*,#7910,.T.); +#7910 = EDGE_CURVE('',#7903,#7447,#7911,.T.); +#7911 = LINE('',#7912,#7913); +#7912 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7913 = VECTOR('',#7914,1.); +#7914 = DIRECTION('',(1.,0.,0.)); +#7915 = ORIENTED_EDGE('',*,*,#7446,.T.); +#7916 = ORIENTED_EDGE('',*,*,#7480,.F.); +#7917 = ORIENTED_EDGE('',*,*,#7830,.T.); +#7918 = ORIENTED_EDGE('',*,*,#7919,.T.); +#7919 = EDGE_CURVE('',#7831,#7920,#7922,.T.); +#7920 = VERTEX_POINT('',#7921); +#7921 = CARTESIAN_POINT('',(0.77,0.4,0.47)); +#7922 = LINE('',#7923,#7924); +#7923 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7924 = VECTOR('',#7925,1.); +#7925 = DIRECTION('',(1.,0.,0.)); +#7926 = ORIENTED_EDGE('',*,*,#7927,.F.); +#7927 = EDGE_CURVE('',#7928,#7920,#7930,.T.); +#7928 = VERTEX_POINT('',#7929); +#7929 = CARTESIAN_POINT('',(0.77,0.4,3.E-02)); +#7930 = LINE('',#7931,#7932); +#7931 = CARTESIAN_POINT('',(0.77,0.4,3.E-02)); +#7932 = VECTOR('',#7933,1.); +#7933 = DIRECTION('',(0.,0.,1.)); +#7934 = ORIENTED_EDGE('',*,*,#7935,.F.); +#7935 = EDGE_CURVE('',#7660,#7928,#7936,.T.); +#7936 = LINE('',#7937,#7938); +#7937 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7938 = VECTOR('',#7939,1.); +#7939 = DIRECTION('',(1.,0.,0.)); +#7940 = ORIENTED_EDGE('',*,*,#7667,.F.); +#7941 = PLANE('',#7942); +#7942 = AXIS2_PLACEMENT_3D('',#7943,#7944,#7945); +#7943 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7944 = DIRECTION('',(0.,1.,0.)); +#7945 = DIRECTION('',(0.,-0.,1.)); +#7946 = ADVANCED_FACE('',(#7947),#7965,.F.); +#7947 = FACE_BOUND('',#7948,.F.); +#7948 = EDGE_LOOP('',(#7949,#7957,#7963,#7964)); +#7949 = ORIENTED_EDGE('',*,*,#7950,.F.); +#7950 = EDGE_CURVE('',#7951,#7495,#7953,.T.); +#7951 = VERTEX_POINT('',#7952); +#7952 = CARTESIAN_POINT('',(-0.725,0.3,0.5)); +#7953 = LINE('',#7954,#7955); +#7954 = CARTESIAN_POINT('',(-0.7625,0.3,0.5)); +#7955 = VECTOR('',#7956,1.); +#7956 = DIRECTION('',(1.,0.,0.)); +#7957 = ORIENTED_EDGE('',*,*,#7958,.T.); +#7958 = EDGE_CURVE('',#7951,#7455,#7959,.T.); +#7959 = LINE('',#7960,#7961); +#7960 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#7961 = VECTOR('',#7962,1.); +#7962 = DIRECTION('',(-0.,-0.,-1.)); +#7963 = ORIENTED_EDGE('',*,*,#7462,.F.); +#7964 = ORIENTED_EDGE('',*,*,#7494,.F.); +#7965 = PLANE('',#7966); +#7966 = AXIS2_PLACEMENT_3D('',#7967,#7968,#7969); +#7967 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#7968 = DIRECTION('',(0.,-1.,0.)); +#7969 = DIRECTION('',(1.,0.,0.)); +#7970 = ADVANCED_FACE('',(#7971),#7989,.F.); +#7971 = FACE_BOUND('',#7972,.F.); +#7972 = EDGE_LOOP('',(#7973,#7974,#7982,#7988)); +#7973 = ORIENTED_EDGE('',*,*,#7958,.F.); +#7974 = ORIENTED_EDGE('',*,*,#7975,.F.); +#7975 = EDGE_CURVE('',#7976,#7951,#7978,.T.); +#7976 = VERTEX_POINT('',#7977); +#7977 = CARTESIAN_POINT('',(-0.725,0.4,0.5)); +#7978 = LINE('',#7979,#7980); +#7979 = CARTESIAN_POINT('',(-0.725,5.E-02,0.5)); +#7980 = VECTOR('',#7981,1.); +#7981 = DIRECTION('',(0.,-1.,0.)); +#7982 = ORIENTED_EDGE('',*,*,#7983,.F.); +#7983 = EDGE_CURVE('',#7447,#7976,#7984,.T.); +#7984 = LINE('',#7985,#7986); +#7985 = CARTESIAN_POINT('',(-0.725,0.4,0.375)); +#7986 = VECTOR('',#7987,1.); +#7987 = DIRECTION('',(0.,0.,1.)); +#7988 = ORIENTED_EDGE('',*,*,#7454,.F.); +#7989 = PLANE('',#7990); +#7990 = AXIS2_PLACEMENT_3D('',#7991,#7992,#7993); +#7991 = CARTESIAN_POINT('',(-0.725,0.5,0.75)); +#7992 = DIRECTION('',(-1.,0.,0.)); +#7993 = DIRECTION('',(0.,-1.,0.)); +#7994 = ADVANCED_FACE('',(#7995),#8013,.F.); +#7995 = FACE_BOUND('',#7996,.F.); +#7996 = EDGE_LOOP('',(#7997,#8005,#8011,#8012)); +#7997 = ORIENTED_EDGE('',*,*,#7998,.F.); +#7998 = EDGE_CURVE('',#7999,#7528,#8001,.T.); +#7999 = VERTEX_POINT('',#8000); +#8000 = CARTESIAN_POINT('',(-0.725,-0.3,0.5)); +#8001 = LINE('',#8002,#8003); +#8002 = CARTESIAN_POINT('',(-0.725,-0.3,0.75)); +#8003 = VECTOR('',#8004,1.); +#8004 = DIRECTION('',(-0.,-0.,-1.)); +#8005 = ORIENTED_EDGE('',*,*,#8006,.F.); +#8006 = EDGE_CURVE('',#7504,#7999,#8007,.T.); +#8007 = LINE('',#8008,#8009); +#8008 = CARTESIAN_POINT('',(-3.75E-02,-0.3,0.5)); +#8009 = VECTOR('',#8010,1.); +#8010 = DIRECTION('',(-1.,0.,0.)); +#8011 = ORIENTED_EDGE('',*,*,#7511,.T.); +#8012 = ORIENTED_EDGE('',*,*,#7537,.F.); +#8013 = PLANE('',#8014); +#8014 = AXIS2_PLACEMENT_3D('',#8015,#8016,#8017); +#8015 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8016 = DIRECTION('',(0.,1.,0.)); +#8017 = DIRECTION('',(-1.,0.,0.)); +#8018 = ADVANCED_FACE('',(#8019),#8046,.T.); +#8019 = FACE_BOUND('',#8020,.T.); +#8020 = EDGE_LOOP('',(#8021,#8029,#8035,#8036,#8042,#8043,#8044,#8045)); +#8021 = ORIENTED_EDGE('',*,*,#8022,.F.); +#8022 = EDGE_CURVE('',#8023,#7976,#8025,.T.); +#8023 = VERTEX_POINT('',#8024); +#8024 = CARTESIAN_POINT('',(-0.77,0.4,0.5)); +#8025 = LINE('',#8026,#8027); +#8026 = CARTESIAN_POINT('',(-0.8,0.4,0.5)); +#8027 = VECTOR('',#8028,1.); +#8028 = DIRECTION('',(1.,0.,0.)); +#8029 = ORIENTED_EDGE('',*,*,#8030,.F.); +#8030 = EDGE_CURVE('',#7579,#8023,#8031,.T.); +#8031 = LINE('',#8032,#8033); +#8032 = CARTESIAN_POINT('',(-0.77,-0.4,0.5)); +#8033 = VECTOR('',#8034,1.); +#8034 = DIRECTION('',(0.,1.,0.)); +#8035 = ORIENTED_EDGE('',*,*,#7587,.T.); +#8036 = ORIENTED_EDGE('',*,*,#8037,.F.); +#8037 = EDGE_CURVE('',#7999,#7588,#8038,.T.); +#8038 = LINE('',#8039,#8040); +#8039 = CARTESIAN_POINT('',(-0.725,-0.35,0.5)); +#8040 = VECTOR('',#8041,1.); +#8041 = DIRECTION('',(0.,-1.,0.)); +#8042 = ORIENTED_EDGE('',*,*,#8006,.F.); +#8043 = ORIENTED_EDGE('',*,*,#7503,.T.); +#8044 = ORIENTED_EDGE('',*,*,#7950,.F.); +#8045 = ORIENTED_EDGE('',*,*,#7975,.F.); +#8046 = PLANE('',#8047); +#8047 = AXIS2_PLACEMENT_3D('',#8048,#8049,#8050); +#8048 = CARTESIAN_POINT('',(-0.8,-0.4,0.5)); +#8049 = DIRECTION('',(0.,0.,1.)); +#8050 = DIRECTION('',(1.,0.,-0.)); +#8051 = ADVANCED_FACE('',(#8052),#8058,.F.); +#8052 = FACE_BOUND('',#8053,.F.); +#8053 = EDGE_LOOP('',(#8054,#8055,#8056,#8057)); +#8054 = ORIENTED_EDGE('',*,*,#8037,.F.); +#8055 = ORIENTED_EDGE('',*,*,#7998,.T.); +#8056 = ORIENTED_EDGE('',*,*,#7527,.F.); +#8057 = ORIENTED_EDGE('',*,*,#7595,.T.); +#8058 = PLANE('',#8059); +#8059 = AXIS2_PLACEMENT_3D('',#8060,#8061,#8062); +#8060 = CARTESIAN_POINT('',(-0.725,-0.3,0.75)); +#8061 = DIRECTION('',(-1.,0.,0.)); +#8062 = DIRECTION('',(0.,-1.,0.)); +#8063 = ADVANCED_FACE('',(#8064),#8121,.F.); +#8064 = FACE_BOUND('',#8065,.F.); +#8065 = EDGE_LOOP('',(#8066,#8076,#8082,#8083,#8091,#8099,#8107,#8115)); +#8066 = ORIENTED_EDGE('',*,*,#8067,.F.); +#8067 = EDGE_CURVE('',#8068,#8070,#8072,.T.); +#8068 = VERTEX_POINT('',#8069); +#8069 = CARTESIAN_POINT('',(-0.77,0.4,-3.469446951954E-18)); +#8070 = VERTEX_POINT('',#8071); +#8071 = CARTESIAN_POINT('',(-0.725,0.4,0.)); +#8072 = LINE('',#8073,#8074); +#8073 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#8074 = VECTOR('',#8075,1.); +#8075 = DIRECTION('',(1.,0.,0.)); +#8076 = ORIENTED_EDGE('',*,*,#8077,.F.); +#8077 = EDGE_CURVE('',#7552,#8068,#8078,.T.); +#8078 = LINE('',#8079,#8080); +#8079 = CARTESIAN_POINT('',(-0.77,-0.4,-3.469446951954E-18)); +#8080 = VECTOR('',#8081,1.); +#8081 = DIRECTION('',(0.,1.,0.)); +#8082 = ORIENTED_EDGE('',*,*,#7551,.T.); +#8083 = ORIENTED_EDGE('',*,*,#8084,.F.); +#8084 = EDGE_CURVE('',#8085,#7554,#8087,.T.); +#8085 = VERTEX_POINT('',#8086); +#8086 = CARTESIAN_POINT('',(-0.725,-0.3,0.)); +#8087 = LINE('',#8088,#8089); +#8088 = CARTESIAN_POINT('',(-0.725,-0.35,0.)); +#8089 = VECTOR('',#8090,1.); +#8090 = DIRECTION('',(0.,-1.,0.)); +#8091 = ORIENTED_EDGE('',*,*,#8092,.F.); +#8092 = EDGE_CURVE('',#8093,#8085,#8095,.T.); +#8093 = VERTEX_POINT('',#8094); +#8094 = CARTESIAN_POINT('',(-0.53,-0.3,-3.469446951954E-18)); +#8095 = LINE('',#8096,#8097); +#8096 = CARTESIAN_POINT('',(-3.75E-02,-0.3,0.)); +#8097 = VECTOR('',#8098,1.); +#8098 = DIRECTION('',(-1.,0.,0.)); +#8099 = ORIENTED_EDGE('',*,*,#8100,.T.); +#8100 = EDGE_CURVE('',#8093,#8101,#8103,.T.); +#8101 = VERTEX_POINT('',#8102); +#8102 = CARTESIAN_POINT('',(-0.53,0.3,-3.469446951954E-18)); +#8103 = LINE('',#8104,#8105); +#8104 = CARTESIAN_POINT('',(-0.53,-0.4,-3.469446951954E-18)); +#8105 = VECTOR('',#8106,1.); +#8106 = DIRECTION('',(0.,1.,0.)); +#8107 = ORIENTED_EDGE('',*,*,#8108,.F.); +#8108 = EDGE_CURVE('',#8109,#8101,#8111,.T.); +#8109 = VERTEX_POINT('',#8110); +#8110 = CARTESIAN_POINT('',(-0.725,0.3,0.)); +#8111 = LINE('',#8112,#8113); +#8112 = CARTESIAN_POINT('',(-0.7625,0.3,0.)); +#8113 = VECTOR('',#8114,1.); +#8114 = DIRECTION('',(1.,0.,0.)); +#8115 = ORIENTED_EDGE('',*,*,#8116,.F.); +#8116 = EDGE_CURVE('',#8070,#8109,#8117,.T.); +#8117 = LINE('',#8118,#8119); +#8118 = CARTESIAN_POINT('',(-0.725,5.E-02,0.)); +#8119 = VECTOR('',#8120,1.); +#8120 = DIRECTION('',(0.,-1.,0.)); +#8121 = PLANE('',#8122); +#8122 = AXIS2_PLACEMENT_3D('',#8123,#8124,#8125); +#8123 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#8124 = DIRECTION('',(0.,0.,1.)); +#8125 = DIRECTION('',(1.,0.,-0.)); +#8126 = ADVANCED_FACE('',(#8127),#8146,.T.); +#8127 = FACE_BOUND('',#8128,.T.); +#8128 = EDGE_LOOP('',(#8129,#8137,#8144,#8145)); +#8129 = ORIENTED_EDGE('',*,*,#8130,.T.); +#8130 = EDGE_CURVE('',#7562,#8131,#8133,.T.); +#8131 = VERTEX_POINT('',#8132); +#8132 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#8133 = LINE('',#8134,#8135); +#8134 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#8135 = VECTOR('',#8136,1.); +#8136 = DIRECTION('',(0.,1.,0.)); +#8137 = ORIENTED_EDGE('',*,*,#8138,.T.); +#8138 = EDGE_CURVE('',#8131,#8068,#8139,.T.); +#8139 = CIRCLE('',#8140,3.E-02); +#8140 = AXIS2_PLACEMENT_3D('',#8141,#8142,#8143); +#8141 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#8142 = DIRECTION('',(0.,-1.,0.)); +#8143 = DIRECTION('',(0.,0.,1.)); +#8144 = ORIENTED_EDGE('',*,*,#8077,.F.); +#8145 = ORIENTED_EDGE('',*,*,#7561,.F.); +#8146 = CYLINDRICAL_SURFACE('',#8147,3.E-02); +#8147 = AXIS2_PLACEMENT_3D('',#8148,#8149,#8150); +#8148 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#8149 = DIRECTION('',(0.,1.,0.)); +#8150 = DIRECTION('',(-1.,0.,0.)); +#8151 = ADVANCED_FACE('',(#8152),#8163,.F.); +#8152 = FACE_BOUND('',#8153,.F.); +#8153 = EDGE_LOOP('',(#8154,#8155,#8161,#8162)); +#8154 = ORIENTED_EDGE('',*,*,#7618,.T.); +#8155 = ORIENTED_EDGE('',*,*,#8156,.T.); +#8156 = EDGE_CURVE('',#7619,#8085,#8157,.T.); +#8157 = LINE('',#8158,#8159); +#8158 = CARTESIAN_POINT('',(-0.725,-0.3,0.75)); +#8159 = VECTOR('',#8160,1.); +#8160 = DIRECTION('',(-0.,-0.,-1.)); +#8161 = ORIENTED_EDGE('',*,*,#8084,.T.); +#8162 = ORIENTED_EDGE('',*,*,#7604,.T.); +#8163 = PLANE('',#8164); +#8164 = AXIS2_PLACEMENT_3D('',#8165,#8166,#8167); +#8165 = CARTESIAN_POINT('',(-0.725,-0.3,0.75)); +#8166 = DIRECTION('',(-1.,0.,0.)); +#8167 = DIRECTION('',(0.,-1.,0.)); +#8168 = ADVANCED_FACE('',(#8169),#8187,.F.); +#8169 = FACE_BOUND('',#8170,.F.); +#8170 = EDGE_LOOP('',(#8171,#8172,#8173,#8181)); +#8171 = ORIENTED_EDGE('',*,*,#7570,.F.); +#8172 = ORIENTED_EDGE('',*,*,#8130,.T.); +#8173 = ORIENTED_EDGE('',*,*,#8174,.T.); +#8174 = EDGE_CURVE('',#8131,#8175,#8177,.T.); +#8175 = VERTEX_POINT('',#8176); +#8176 = CARTESIAN_POINT('',(-0.8,0.4,0.47)); +#8177 = LINE('',#8178,#8179); +#8178 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#8179 = VECTOR('',#8180,1.); +#8180 = DIRECTION('',(0.,0.,1.)); +#8181 = ORIENTED_EDGE('',*,*,#8182,.F.); +#8182 = EDGE_CURVE('',#7571,#8175,#8183,.T.); +#8183 = LINE('',#8184,#8185); +#8184 = CARTESIAN_POINT('',(-0.8,-0.4,0.47)); +#8185 = VECTOR('',#8186,1.); +#8186 = DIRECTION('',(0.,1.,0.)); +#8187 = PLANE('',#8188); +#8188 = AXIS2_PLACEMENT_3D('',#8189,#8190,#8191); +#8189 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#8190 = DIRECTION('',(1.,0.,0.)); +#8191 = DIRECTION('',(0.,0.,1.)); +#8192 = ADVANCED_FACE('',(#8193),#8205,.T.); +#8193 = FACE_BOUND('',#8194,.T.); +#8194 = EDGE_LOOP('',(#8195,#8196,#8197,#8204)); +#8195 = ORIENTED_EDGE('',*,*,#7578,.T.); +#8196 = ORIENTED_EDGE('',*,*,#8030,.T.); +#8197 = ORIENTED_EDGE('',*,*,#8198,.F.); +#8198 = EDGE_CURVE('',#8175,#8023,#8199,.T.); +#8199 = CIRCLE('',#8200,3.E-02); +#8200 = AXIS2_PLACEMENT_3D('',#8201,#8202,#8203); +#8201 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#8202 = DIRECTION('',(0.,1.,0.)); +#8203 = DIRECTION('',(0.,-0.,1.)); +#8204 = ORIENTED_EDGE('',*,*,#8182,.F.); +#8205 = CYLINDRICAL_SURFACE('',#8206,3.E-02); +#8206 = AXIS2_PLACEMENT_3D('',#8207,#8208,#8209); +#8207 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#8208 = DIRECTION('',(0.,1.,0.)); +#8209 = DIRECTION('',(-1.,0.,0.)); +#8210 = ADVANCED_FACE('',(#8211),#8223,.F.); +#8211 = FACE_BOUND('',#8212,.F.); +#8212 = EDGE_LOOP('',(#8213,#8214,#8215,#8222)); +#8213 = ORIENTED_EDGE('',*,*,#8156,.F.); +#8214 = ORIENTED_EDGE('',*,*,#7699,.T.); +#8215 = ORIENTED_EDGE('',*,*,#8216,.T.); +#8216 = EDGE_CURVE('',#7692,#8093,#8217,.T.); +#8217 = CIRCLE('',#8218,3.E-02); +#8218 = AXIS2_PLACEMENT_3D('',#8219,#8220,#8221); +#8219 = CARTESIAN_POINT('',(-0.53,-0.3,3.E-02)); +#8220 = DIRECTION('',(-0.,1.,0.)); +#8221 = DIRECTION('',(1.,0.,0.)); +#8222 = ORIENTED_EDGE('',*,*,#8092,.T.); +#8223 = PLANE('',#8224); +#8224 = AXIS2_PLACEMENT_3D('',#8225,#8226,#8227); +#8225 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8226 = DIRECTION('',(0.,1.,0.)); +#8227 = DIRECTION('',(-1.,0.,0.)); +#8228 = ADVANCED_FACE('',(#8229),#8241,.T.); +#8229 = FACE_BOUND('',#8230,.T.); +#8230 = EDGE_LOOP('',(#8231,#8232,#8233,#8234)); +#8231 = ORIENTED_EDGE('',*,*,#7691,.F.); +#8232 = ORIENTED_EDGE('',*,*,#8216,.T.); +#8233 = ORIENTED_EDGE('',*,*,#8100,.T.); +#8234 = ORIENTED_EDGE('',*,*,#8235,.F.); +#8235 = EDGE_CURVE('',#7684,#8101,#8236,.T.); +#8236 = CIRCLE('',#8237,3.E-02); +#8237 = AXIS2_PLACEMENT_3D('',#8238,#8239,#8240); +#8238 = CARTESIAN_POINT('',(-0.53,0.3,3.E-02)); +#8239 = DIRECTION('',(-0.,1.,0.)); +#8240 = DIRECTION('',(1.,0.,0.)); +#8241 = CYLINDRICAL_SURFACE('',#8242,3.E-02); +#8242 = AXIS2_PLACEMENT_3D('',#8243,#8244,#8245); +#8243 = CARTESIAN_POINT('',(-0.53,-0.4,3.E-02)); +#8244 = DIRECTION('',(0.,1.,0.)); +#8245 = DIRECTION('',(1.,0.,0.)); +#8246 = ADVANCED_FACE('',(#8247),#8258,.F.); +#8247 = FACE_BOUND('',#8248,.F.); +#8248 = EDGE_LOOP('',(#8249,#8250,#8256,#8257)); +#8249 = ORIENTED_EDGE('',*,*,#7683,.T.); +#8250 = ORIENTED_EDGE('',*,*,#8251,.T.); +#8251 = EDGE_CURVE('',#7676,#8109,#8252,.T.); +#8252 = LINE('',#8253,#8254); +#8253 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#8254 = VECTOR('',#8255,1.); +#8255 = DIRECTION('',(-0.,-0.,-1.)); +#8256 = ORIENTED_EDGE('',*,*,#8108,.T.); +#8257 = ORIENTED_EDGE('',*,*,#8235,.F.); +#8258 = PLANE('',#8259); +#8259 = AXIS2_PLACEMENT_3D('',#8260,#8261,#8262); +#8260 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#8261 = DIRECTION('',(0.,-1.,0.)); +#8262 = DIRECTION('',(1.,0.,0.)); +#8263 = ADVANCED_FACE('',(#8264),#8275,.F.); +#8264 = FACE_BOUND('',#8265,.F.); +#8265 = EDGE_LOOP('',(#8266,#8267,#8268,#8274)); +#8266 = ORIENTED_EDGE('',*,*,#8251,.F.); +#8267 = ORIENTED_EDGE('',*,*,#7675,.T.); +#8268 = ORIENTED_EDGE('',*,*,#8269,.F.); +#8269 = EDGE_CURVE('',#8070,#7668,#8270,.T.); +#8270 = LINE('',#8271,#8272); +#8271 = CARTESIAN_POINT('',(-0.725,0.4,0.375)); +#8272 = VECTOR('',#8273,1.); +#8273 = DIRECTION('',(0.,0.,1.)); +#8274 = ORIENTED_EDGE('',*,*,#8116,.T.); +#8275 = PLANE('',#8276); +#8276 = AXIS2_PLACEMENT_3D('',#8277,#8278,#8279); +#8277 = CARTESIAN_POINT('',(-0.725,0.5,0.75)); +#8278 = DIRECTION('',(-1.,0.,0.)); +#8279 = DIRECTION('',(0.,-1.,0.)); +#8280 = ADVANCED_FACE('',(#8281),#8306,.F.); +#8281 = FACE_BOUND('',#8282,.F.); +#8282 = EDGE_LOOP('',(#8283,#8284,#8292,#8300)); +#8283 = ORIENTED_EDGE('',*,*,#7659,.T.); +#8284 = ORIENTED_EDGE('',*,*,#8285,.T.); +#8285 = EDGE_CURVE('',#7652,#8286,#8288,.T.); +#8286 = VERTEX_POINT('',#8287); +#8287 = CARTESIAN_POINT('',(0.725,0.3,0.)); +#8288 = LINE('',#8289,#8290); +#8289 = CARTESIAN_POINT('',(0.725,0.3,0.75)); +#8290 = VECTOR('',#8291,1.); +#8291 = DIRECTION('',(-0.,-0.,-1.)); +#8292 = ORIENTED_EDGE('',*,*,#8293,.T.); +#8293 = EDGE_CURVE('',#8286,#8294,#8296,.T.); +#8294 = VERTEX_POINT('',#8295); +#8295 = CARTESIAN_POINT('',(0.725,0.4,0.)); +#8296 = LINE('',#8297,#8298); +#8297 = CARTESIAN_POINT('',(0.725,-5.E-02,0.)); +#8298 = VECTOR('',#8299,1.); +#8299 = DIRECTION('',(0.,1.,0.)); +#8300 = ORIENTED_EDGE('',*,*,#8301,.F.); +#8301 = EDGE_CURVE('',#7660,#8294,#8302,.T.); +#8302 = LINE('',#8303,#8304); +#8303 = CARTESIAN_POINT('',(0.725,0.4,0.375)); +#8304 = VECTOR('',#8305,1.); +#8305 = DIRECTION('',(0.,0.,-1.)); +#8306 = PLANE('',#8307); +#8307 = AXIS2_PLACEMENT_3D('',#8308,#8309,#8310); +#8308 = CARTESIAN_POINT('',(0.725,0.3,0.75)); +#8309 = DIRECTION('',(1.,0.,0.)); +#8310 = DIRECTION('',(-0.,1.,0.)); +#8311 = ADVANCED_FACE('',(#8312),#8331,.F.); +#8312 = FACE_BOUND('',#8313,.F.); +#8313 = EDGE_LOOP('',(#8314,#8315,#8316,#8325)); +#8314 = ORIENTED_EDGE('',*,*,#8285,.F.); +#8315 = ORIENTED_EDGE('',*,*,#7651,.T.); +#8316 = ORIENTED_EDGE('',*,*,#8317,.F.); +#8317 = EDGE_CURVE('',#8318,#7644,#8320,.T.); +#8318 = VERTEX_POINT('',#8319); +#8319 = CARTESIAN_POINT('',(0.53,0.3,-3.469446951954E-18)); +#8320 = CIRCLE('',#8321,3.E-02); +#8321 = AXIS2_PLACEMENT_3D('',#8322,#8323,#8324); +#8322 = CARTESIAN_POINT('',(0.53,0.3,3.E-02)); +#8323 = DIRECTION('',(0.,1.,-0.)); +#8324 = DIRECTION('',(-1.,0.,0.)); +#8325 = ORIENTED_EDGE('',*,*,#8326,.T.); +#8326 = EDGE_CURVE('',#8318,#8286,#8327,.T.); +#8327 = LINE('',#8328,#8329); +#8328 = CARTESIAN_POINT('',(-0.1125,0.3,0.)); +#8329 = VECTOR('',#8330,1.); +#8330 = DIRECTION('',(1.,0.,0.)); +#8331 = PLANE('',#8332); +#8332 = AXIS2_PLACEMENT_3D('',#8333,#8334,#8335); +#8333 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#8334 = DIRECTION('',(0.,-1.,0.)); +#8335 = DIRECTION('',(1.,0.,0.)); +#8336 = ADVANCED_FACE('',(#8337),#8356,.T.); +#8337 = FACE_BOUND('',#8338,.T.); +#8338 = EDGE_LOOP('',(#8339,#8340,#8348,#8355)); +#8339 = ORIENTED_EDGE('',*,*,#8317,.F.); +#8340 = ORIENTED_EDGE('',*,*,#8341,.F.); +#8341 = EDGE_CURVE('',#8342,#8318,#8344,.T.); +#8342 = VERTEX_POINT('',#8343); +#8343 = CARTESIAN_POINT('',(0.53,-0.3,-3.469446951954E-18)); +#8344 = LINE('',#8345,#8346); +#8345 = CARTESIAN_POINT('',(0.53,-0.4,-3.469446951954E-18)); +#8346 = VECTOR('',#8347,1.); +#8347 = DIRECTION('',(0.,1.,0.)); +#8348 = ORIENTED_EDGE('',*,*,#8349,.T.); +#8349 = EDGE_CURVE('',#8342,#7636,#8350,.T.); +#8350 = CIRCLE('',#8351,3.E-02); +#8351 = AXIS2_PLACEMENT_3D('',#8352,#8353,#8354); +#8352 = CARTESIAN_POINT('',(0.53,-0.3,3.E-02)); +#8353 = DIRECTION('',(0.,1.,-0.)); +#8354 = DIRECTION('',(-1.,0.,0.)); +#8355 = ORIENTED_EDGE('',*,*,#7643,.T.); +#8356 = CYLINDRICAL_SURFACE('',#8357,3.E-02); +#8357 = AXIS2_PLACEMENT_3D('',#8358,#8359,#8360); +#8358 = CARTESIAN_POINT('',(0.53,-0.4,3.E-02)); +#8359 = DIRECTION('',(0.,1.,0.)); +#8360 = DIRECTION('',(-1.,0.,0.)); +#8361 = ADVANCED_FACE('',(#8362),#8380,.F.); +#8362 = FACE_BOUND('',#8363,.F.); +#8363 = EDGE_LOOP('',(#8364,#8365,#8373,#8379)); +#8364 = ORIENTED_EDGE('',*,*,#7635,.T.); +#8365 = ORIENTED_EDGE('',*,*,#8366,.T.); +#8366 = EDGE_CURVE('',#7628,#8367,#8369,.T.); +#8367 = VERTEX_POINT('',#8368); +#8368 = CARTESIAN_POINT('',(0.725,-0.3,0.)); +#8369 = LINE('',#8370,#8371); +#8370 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8371 = VECTOR('',#8372,1.); +#8372 = DIRECTION('',(-0.,-0.,-1.)); +#8373 = ORIENTED_EDGE('',*,*,#8374,.T.); +#8374 = EDGE_CURVE('',#8367,#8342,#8375,.T.); +#8375 = LINE('',#8376,#8377); +#8376 = CARTESIAN_POINT('',(0.6125,-0.3,0.)); +#8377 = VECTOR('',#8378,1.); +#8378 = DIRECTION('',(-1.,0.,0.)); +#8379 = ORIENTED_EDGE('',*,*,#8349,.T.); +#8380 = PLANE('',#8381); +#8381 = AXIS2_PLACEMENT_3D('',#8382,#8383,#8384); +#8382 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8383 = DIRECTION('',(0.,1.,0.)); +#8384 = DIRECTION('',(-1.,0.,0.)); +#8385 = ADVANCED_FACE('',(#8386),#8397,.F.); +#8386 = FACE_BOUND('',#8387,.F.); +#8387 = EDGE_LOOP('',(#8388,#8389,#8390,#8391)); +#8388 = ORIENTED_EDGE('',*,*,#8366,.F.); +#8389 = ORIENTED_EDGE('',*,*,#7627,.T.); +#8390 = ORIENTED_EDGE('',*,*,#7749,.T.); +#8391 = ORIENTED_EDGE('',*,*,#8392,.T.); +#8392 = EDGE_CURVE('',#7740,#8367,#8393,.T.); +#8393 = LINE('',#8394,#8395); +#8394 = CARTESIAN_POINT('',(0.725,-0.45,0.)); +#8395 = VECTOR('',#8396,1.); +#8396 = DIRECTION('',(0.,1.,0.)); +#8397 = PLANE('',#8398); +#8398 = AXIS2_PLACEMENT_3D('',#8399,#8400,#8401); +#8399 = CARTESIAN_POINT('',(0.725,-0.5,0.75)); +#8400 = DIRECTION('',(1.,0.,0.)); +#8401 = DIRECTION('',(-0.,1.,0.)); +#8402 = ADVANCED_FACE('',(#8403),#8428,.T.); +#8403 = FACE_BOUND('',#8404,.T.); +#8404 = EDGE_LOOP('',(#8405,#8413,#8414,#8422)); +#8405 = ORIENTED_EDGE('',*,*,#8406,.T.); +#8406 = EDGE_CURVE('',#8407,#7708,#8409,.T.); +#8407 = VERTEX_POINT('',#8408); +#8408 = CARTESIAN_POINT('',(0.277128129211,0.32,1.5E-02)); +#8409 = LINE('',#8410,#8411); +#8410 = CARTESIAN_POINT('',(0.277128129211,0.32,1.5E-02)); +#8411 = VECTOR('',#8412,1.); +#8412 = DIRECTION('',(0.,0.,1.)); +#8413 = ORIENTED_EDGE('',*,*,#7707,.T.); +#8414 = ORIENTED_EDGE('',*,*,#8415,.F.); +#8415 = EDGE_CURVE('',#8416,#7710,#8418,.T.); +#8416 = VERTEX_POINT('',#8417); +#8417 = CARTESIAN_POINT('',(0.277128129211,-0.32,1.5E-02)); +#8418 = LINE('',#8419,#8420); +#8419 = CARTESIAN_POINT('',(0.277128129211,-0.32,1.5E-02)); +#8420 = VECTOR('',#8421,1.); +#8421 = DIRECTION('',(0.,0.,1.)); +#8422 = ORIENTED_EDGE('',*,*,#8423,.F.); +#8423 = EDGE_CURVE('',#8407,#8416,#8424,.T.); +#8424 = LINE('',#8425,#8426); +#8425 = CARTESIAN_POINT('',(0.277128129211,0.32,1.5E-02)); +#8426 = VECTOR('',#8427,1.); +#8427 = DIRECTION('',(0.,-1.,0.)); +#8428 = PLANE('',#8429); +#8429 = AXIS2_PLACEMENT_3D('',#8430,#8431,#8432); +#8430 = CARTESIAN_POINT('',(0.277128129211,0.32,1.5E-02)); +#8431 = DIRECTION('',(1.,0.,0.)); +#8432 = DIRECTION('',(0.,-1.,0.)); +#8433 = ADVANCED_FACE('',(#8434),#8452,.T.); +#8434 = FACE_BOUND('',#8435,.T.); +#8435 = EDGE_LOOP('',(#8436,#8444,#8445,#8446)); +#8436 = ORIENTED_EDGE('',*,*,#8437,.T.); +#8437 = EDGE_CURVE('',#8438,#7718,#8440,.T.); +#8438 = VERTEX_POINT('',#8439); +#8439 = CARTESIAN_POINT('',(-0.277128129211,0.,1.5E-02)); +#8440 = LINE('',#8441,#8442); +#8441 = CARTESIAN_POINT('',(-0.277128129211,0.,1.5E-02)); +#8442 = VECTOR('',#8443,1.); +#8443 = DIRECTION('',(0.,0.,1.)); +#8444 = ORIENTED_EDGE('',*,*,#7725,.T.); +#8445 = ORIENTED_EDGE('',*,*,#8406,.F.); +#8446 = ORIENTED_EDGE('',*,*,#8447,.F.); +#8447 = EDGE_CURVE('',#8438,#8407,#8448,.T.); +#8448 = LINE('',#8449,#8450); +#8449 = CARTESIAN_POINT('',(-0.277128129211,0.,1.5E-02)); +#8450 = VECTOR('',#8451,1.); +#8451 = DIRECTION('',(0.866025403784,0.5,0.)); +#8452 = PLANE('',#8453); +#8453 = AXIS2_PLACEMENT_3D('',#8454,#8455,#8456); +#8454 = CARTESIAN_POINT('',(-0.277128129211,0.,1.5E-02)); +#8455 = DIRECTION('',(-0.5,0.866025403784,0.)); +#8456 = DIRECTION('',(0.866025403784,0.5,0.)); +#8457 = ADVANCED_FACE('',(#8458),#8469,.T.); +#8458 = FACE_BOUND('',#8459,.T.); +#8459 = EDGE_LOOP('',(#8460,#8461,#8462,#8463)); +#8460 = ORIENTED_EDGE('',*,*,#8415,.T.); +#8461 = ORIENTED_EDGE('',*,*,#7717,.T.); +#8462 = ORIENTED_EDGE('',*,*,#8437,.F.); +#8463 = ORIENTED_EDGE('',*,*,#8464,.F.); +#8464 = EDGE_CURVE('',#8416,#8438,#8465,.T.); +#8465 = LINE('',#8466,#8467); +#8466 = CARTESIAN_POINT('',(0.277128129211,-0.32,1.5E-02)); +#8467 = VECTOR('',#8468,1.); +#8468 = DIRECTION('',(-0.866025403784,0.5,0.)); +#8469 = PLANE('',#8470); +#8470 = AXIS2_PLACEMENT_3D('',#8471,#8472,#8473); +#8471 = CARTESIAN_POINT('',(0.277128129211,-0.32,1.5E-02)); +#8472 = DIRECTION('',(-0.5,-0.866025403784,0.)); +#8473 = DIRECTION('',(-0.866025403784,0.5,0.)); +#8474 = ADVANCED_FACE('',(#8475),#8497,.F.); +#8475 = FACE_BOUND('',#8476,.F.); +#8476 = EDGE_LOOP('',(#8477,#8485,#8486,#8487,#8488,#8489,#8490,#8491)); +#8477 = ORIENTED_EDGE('',*,*,#8478,.F.); +#8478 = EDGE_CURVE('',#8294,#8479,#8481,.T.); +#8479 = VERTEX_POINT('',#8480); +#8480 = CARTESIAN_POINT('',(0.77,0.4,-3.469446951954E-18)); +#8481 = LINE('',#8482,#8483); +#8482 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#8483 = VECTOR('',#8484,1.); +#8484 = DIRECTION('',(1.,0.,0.)); +#8485 = ORIENTED_EDGE('',*,*,#8293,.F.); +#8486 = ORIENTED_EDGE('',*,*,#8326,.F.); +#8487 = ORIENTED_EDGE('',*,*,#8341,.F.); +#8488 = ORIENTED_EDGE('',*,*,#8374,.F.); +#8489 = ORIENTED_EDGE('',*,*,#8392,.F.); +#8490 = ORIENTED_EDGE('',*,*,#7739,.T.); +#8491 = ORIENTED_EDGE('',*,*,#8492,.T.); +#8492 = EDGE_CURVE('',#7742,#8479,#8493,.T.); +#8493 = LINE('',#8494,#8495); +#8494 = CARTESIAN_POINT('',(0.77,-0.4,-3.469446951954E-18)); +#8495 = VECTOR('',#8496,1.); +#8496 = DIRECTION('',(0.,1.,0.)); +#8497 = PLANE('',#8498); +#8498 = AXIS2_PLACEMENT_3D('',#8499,#8500,#8501); +#8499 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#8500 = DIRECTION('',(0.,0.,1.)); +#8501 = DIRECTION('',(1.,0.,-0.)); +#8502 = ADVANCED_FACE('',(#8503),#8522,.T.); +#8503 = FACE_BOUND('',#8504,.T.); +#8504 = EDGE_LOOP('',(#8505,#8506,#8507,#8516)); +#8505 = ORIENTED_EDGE('',*,*,#7791,.T.); +#8506 = ORIENTED_EDGE('',*,*,#8492,.T.); +#8507 = ORIENTED_EDGE('',*,*,#8508,.F.); +#8508 = EDGE_CURVE('',#8509,#8479,#8511,.T.); +#8509 = VERTEX_POINT('',#8510); +#8510 = CARTESIAN_POINT('',(0.8,0.4,3.E-02)); +#8511 = CIRCLE('',#8512,3.E-02); +#8512 = AXIS2_PLACEMENT_3D('',#8513,#8514,#8515); +#8513 = CARTESIAN_POINT('',(0.77,0.4,3.E-02)); +#8514 = DIRECTION('',(0.,1.,0.)); +#8515 = DIRECTION('',(0.,-0.,1.)); +#8516 = ORIENTED_EDGE('',*,*,#8517,.F.); +#8517 = EDGE_CURVE('',#7784,#8509,#8518,.T.); +#8518 = LINE('',#8519,#8520); +#8519 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#8520 = VECTOR('',#8521,1.); +#8521 = DIRECTION('',(0.,1.,0.)); +#8522 = CYLINDRICAL_SURFACE('',#8523,3.E-02); +#8523 = AXIS2_PLACEMENT_3D('',#8524,#8525,#8526); +#8524 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02)); +#8525 = DIRECTION('',(0.,1.,0.)); +#8526 = DIRECTION('',(1.,0.,0.)); +#8527 = ADVANCED_FACE('',(#8528),#8546,.T.); +#8528 = FACE_BOUND('',#8529,.T.); +#8529 = EDGE_LOOP('',(#8530,#8531,#8532,#8540)); +#8530 = ORIENTED_EDGE('',*,*,#7783,.F.); +#8531 = ORIENTED_EDGE('',*,*,#8517,.T.); +#8532 = ORIENTED_EDGE('',*,*,#8533,.T.); +#8533 = EDGE_CURVE('',#8509,#8534,#8536,.T.); +#8534 = VERTEX_POINT('',#8535); +#8535 = CARTESIAN_POINT('',(0.8,0.4,0.47)); +#8536 = LINE('',#8537,#8538); +#8537 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#8538 = VECTOR('',#8539,1.); +#8539 = DIRECTION('',(0.,0.,1.)); +#8540 = ORIENTED_EDGE('',*,*,#8541,.F.); +#8541 = EDGE_CURVE('',#7775,#8534,#8542,.T.); +#8542 = LINE('',#8543,#8544); +#8543 = CARTESIAN_POINT('',(0.8,-0.4,0.47)); +#8544 = VECTOR('',#8545,1.); +#8545 = DIRECTION('',(0.,1.,0.)); +#8546 = PLANE('',#8547); +#8547 = AXIS2_PLACEMENT_3D('',#8548,#8549,#8550); +#8548 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#8549 = DIRECTION('',(1.,0.,0.)); +#8550 = DIRECTION('',(0.,0.,1.)); +#8551 = ADVANCED_FACE('',(#8552),#8571,.T.); +#8552 = FACE_BOUND('',#8553,.T.); +#8553 = EDGE_LOOP('',(#8554,#8555,#8564,#8570)); +#8554 = ORIENTED_EDGE('',*,*,#8541,.T.); +#8555 = ORIENTED_EDGE('',*,*,#8556,.T.); +#8556 = EDGE_CURVE('',#8534,#8557,#8559,.T.); +#8557 = VERTEX_POINT('',#8558); +#8558 = CARTESIAN_POINT('',(0.77,0.4,0.5)); +#8559 = CIRCLE('',#8560,3.E-02); +#8560 = AXIS2_PLACEMENT_3D('',#8561,#8562,#8563); +#8561 = CARTESIAN_POINT('',(0.77,0.4,0.47)); +#8562 = DIRECTION('',(0.,-1.,0.)); +#8563 = DIRECTION('',(0.,0.,1.)); +#8564 = ORIENTED_EDGE('',*,*,#8565,.F.); +#8565 = EDGE_CURVE('',#7767,#8557,#8566,.T.); +#8566 = LINE('',#8567,#8568); +#8567 = CARTESIAN_POINT('',(0.77,-0.4,0.5)); +#8568 = VECTOR('',#8569,1.); +#8569 = DIRECTION('',(0.,1.,0.)); +#8570 = ORIENTED_EDGE('',*,*,#7774,.F.); +#8571 = CYLINDRICAL_SURFACE('',#8572,3.E-02); +#8572 = AXIS2_PLACEMENT_3D('',#8573,#8574,#8575); +#8573 = CARTESIAN_POINT('',(0.77,-0.4,0.47)); +#8574 = DIRECTION('',(0.,1.,0.)); +#8575 = DIRECTION('',(1.,0.,0.)); +#8576 = ADVANCED_FACE('',(#8577),#8618,.T.); +#8577 = FACE_BOUND('',#8578,.T.); +#8578 = EDGE_LOOP('',(#8579,#8587,#8595,#8601,#8602,#8610,#8616,#8617)); +#8579 = ORIENTED_EDGE('',*,*,#8580,.F.); +#8580 = EDGE_CURVE('',#8581,#8557,#8583,.T.); +#8581 = VERTEX_POINT('',#8582); +#8582 = CARTESIAN_POINT('',(0.725,0.4,0.5)); +#8583 = LINE('',#8584,#8585); +#8584 = CARTESIAN_POINT('',(0.5,0.4,0.5)); +#8585 = VECTOR('',#8586,1.); +#8586 = DIRECTION('',(1.,0.,0.)); +#8587 = ORIENTED_EDGE('',*,*,#8588,.F.); +#8588 = EDGE_CURVE('',#8589,#8581,#8591,.T.); +#8589 = VERTEX_POINT('',#8590); +#8590 = CARTESIAN_POINT('',(0.725,0.3,0.5)); +#8591 = LINE('',#8592,#8593); +#8592 = CARTESIAN_POINT('',(0.725,-5.E-02,0.5)); +#8593 = VECTOR('',#8594,1.); +#8594 = DIRECTION('',(0.,1.,0.)); +#8595 = ORIENTED_EDGE('',*,*,#8596,.F.); +#8596 = EDGE_CURVE('',#7872,#8589,#8597,.T.); +#8597 = LINE('',#8598,#8599); +#8598 = CARTESIAN_POINT('',(-0.1125,0.3,0.5)); +#8599 = VECTOR('',#8600,1.); +#8600 = DIRECTION('',(1.,0.,0.)); +#8601 = ORIENTED_EDGE('',*,*,#7871,.F.); +#8602 = ORIENTED_EDGE('',*,*,#8603,.F.); +#8603 = EDGE_CURVE('',#8604,#7863,#8606,.T.); +#8604 = VERTEX_POINT('',#8605); +#8605 = CARTESIAN_POINT('',(0.725,-0.3,0.5)); +#8606 = LINE('',#8607,#8608); +#8607 = CARTESIAN_POINT('',(0.6125,-0.3,0.5)); +#8608 = VECTOR('',#8609,1.); +#8609 = DIRECTION('',(-1.,0.,0.)); +#8610 = ORIENTED_EDGE('',*,*,#8611,.F.); +#8611 = EDGE_CURVE('',#7759,#8604,#8612,.T.); +#8612 = LINE('',#8613,#8614); +#8613 = CARTESIAN_POINT('',(0.725,-0.45,0.5)); +#8614 = VECTOR('',#8615,1.); +#8615 = DIRECTION('',(0.,1.,0.)); +#8616 = ORIENTED_EDGE('',*,*,#7766,.T.); +#8617 = ORIENTED_EDGE('',*,*,#8565,.T.); +#8618 = PLANE('',#8619); +#8619 = AXIS2_PLACEMENT_3D('',#8620,#8621,#8622); +#8620 = CARTESIAN_POINT('',(0.5,-0.4,0.5)); +#8621 = DIRECTION('',(0.,0.,1.)); +#8622 = DIRECTION('',(1.,0.,-0.)); +#8623 = ADVANCED_FACE('',(#8624),#8635,.F.); +#8624 = FACE_BOUND('',#8625,.F.); +#8625 = EDGE_LOOP('',(#8626,#8632,#8633,#8634)); +#8626 = ORIENTED_EDGE('',*,*,#8627,.F.); +#8627 = EDGE_CURVE('',#8604,#7807,#8628,.T.); +#8628 = LINE('',#8629,#8630); +#8629 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8630 = VECTOR('',#8631,1.); +#8631 = DIRECTION('',(-0.,-0.,-1.)); +#8632 = ORIENTED_EDGE('',*,*,#8611,.F.); +#8633 = ORIENTED_EDGE('',*,*,#7758,.T.); +#8634 = ORIENTED_EDGE('',*,*,#7816,.F.); +#8635 = PLANE('',#8636); +#8636 = AXIS2_PLACEMENT_3D('',#8637,#8638,#8639); +#8637 = CARTESIAN_POINT('',(0.725,-0.5,0.75)); +#8638 = DIRECTION('',(1.,0.,0.)); +#8639 = DIRECTION('',(-0.,1.,0.)); +#8640 = ADVANCED_FACE('',(#8641),#8647,.F.); +#8641 = FACE_BOUND('',#8642,.F.); +#8642 = EDGE_LOOP('',(#8643,#8644,#8645,#8646)); +#8643 = ORIENTED_EDGE('',*,*,#8603,.F.); +#8644 = ORIENTED_EDGE('',*,*,#8627,.T.); +#8645 = ORIENTED_EDGE('',*,*,#7806,.F.); +#8646 = ORIENTED_EDGE('',*,*,#7862,.T.); +#8647 = PLANE('',#8648); +#8648 = AXIS2_PLACEMENT_3D('',#8649,#8650,#8651); +#8649 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8650 = DIRECTION('',(0.,1.,0.)); +#8651 = DIRECTION('',(-1.,0.,0.)); +#8652 = ADVANCED_FACE('',(#8653),#8669,.F.); +#8653 = FACE_BOUND('',#8654,.F.); +#8654 = EDGE_LOOP('',(#8655,#8656,#8662,#8663)); +#8655 = ORIENTED_EDGE('',*,*,#8588,.F.); +#8656 = ORIENTED_EDGE('',*,*,#8657,.T.); +#8657 = EDGE_CURVE('',#8589,#7840,#8658,.T.); +#8658 = LINE('',#8659,#8660); +#8659 = CARTESIAN_POINT('',(0.725,0.3,0.75)); +#8660 = VECTOR('',#8661,1.); +#8661 = DIRECTION('',(-0.,-0.,-1.)); +#8662 = ORIENTED_EDGE('',*,*,#7847,.F.); +#8663 = ORIENTED_EDGE('',*,*,#8664,.F.); +#8664 = EDGE_CURVE('',#8581,#7831,#8665,.T.); +#8665 = LINE('',#8666,#8667); +#8666 = CARTESIAN_POINT('',(0.725,0.4,0.375)); +#8667 = VECTOR('',#8668,1.); +#8668 = DIRECTION('',(0.,0.,-1.)); +#8669 = PLANE('',#8670); +#8670 = AXIS2_PLACEMENT_3D('',#8671,#8672,#8673); +#8671 = CARTESIAN_POINT('',(0.725,0.3,0.75)); +#8672 = DIRECTION('',(1.,0.,0.)); +#8673 = DIRECTION('',(-0.,1.,0.)); +#8674 = ADVANCED_FACE('',(#8675),#8681,.F.); +#8675 = FACE_BOUND('',#8676,.F.); +#8676 = EDGE_LOOP('',(#8677,#8678,#8679,#8680)); +#8677 = ORIENTED_EDGE('',*,*,#8657,.F.); +#8678 = ORIENTED_EDGE('',*,*,#8596,.F.); +#8679 = ORIENTED_EDGE('',*,*,#7879,.F.); +#8680 = ORIENTED_EDGE('',*,*,#7839,.F.); +#8681 = PLANE('',#8682); +#8682 = AXIS2_PLACEMENT_3D('',#8683,#8684,#8685); +#8683 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#8684 = DIRECTION('',(0.,-1.,0.)); +#8685 = DIRECTION('',(1.,0.,0.)); +#8686 = ADVANCED_FACE('',(#8687),#8699,.T.); +#8687 = FACE_BOUND('',#8688,.T.); +#8688 = EDGE_LOOP('',(#8689,#8690,#8691,#8692,#8693,#8694,#8695,#8696, + #8697,#8698)); +#8689 = ORIENTED_EDGE('',*,*,#8067,.F.); +#8690 = ORIENTED_EDGE('',*,*,#8138,.F.); +#8691 = ORIENTED_EDGE('',*,*,#8174,.T.); +#8692 = ORIENTED_EDGE('',*,*,#8198,.T.); +#8693 = ORIENTED_EDGE('',*,*,#8022,.T.); +#8694 = ORIENTED_EDGE('',*,*,#7983,.F.); +#8695 = ORIENTED_EDGE('',*,*,#7910,.F.); +#8696 = ORIENTED_EDGE('',*,*,#7902,.F.); +#8697 = ORIENTED_EDGE('',*,*,#7894,.T.); +#8698 = ORIENTED_EDGE('',*,*,#8269,.F.); +#8699 = PLANE('',#8700); +#8700 = AXIS2_PLACEMENT_3D('',#8701,#8702,#8703); +#8701 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#8702 = DIRECTION('',(0.,1.,0.)); +#8703 = DIRECTION('',(0.,-0.,1.)); +#8704 = ADVANCED_FACE('',(#8705),#8717,.T.); +#8705 = FACE_BOUND('',#8706,.T.); +#8706 = EDGE_LOOP('',(#8707,#8708,#8709,#8710,#8711,#8712,#8713,#8714, + #8715,#8716)); +#8707 = ORIENTED_EDGE('',*,*,#8478,.F.); +#8708 = ORIENTED_EDGE('',*,*,#8301,.F.); +#8709 = ORIENTED_EDGE('',*,*,#7935,.T.); +#8710 = ORIENTED_EDGE('',*,*,#7927,.T.); +#8711 = ORIENTED_EDGE('',*,*,#7919,.F.); +#8712 = ORIENTED_EDGE('',*,*,#8664,.F.); +#8713 = ORIENTED_EDGE('',*,*,#8580,.T.); +#8714 = ORIENTED_EDGE('',*,*,#8556,.F.); +#8715 = ORIENTED_EDGE('',*,*,#8533,.F.); +#8716 = ORIENTED_EDGE('',*,*,#8508,.T.); +#8717 = PLANE('',#8718); +#8718 = AXIS2_PLACEMENT_3D('',#8719,#8720,#8721); +#8719 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#8720 = DIRECTION('',(0.,1.,0.)); +#8721 = DIRECTION('',(0.,-0.,1.)); +#8722 = ADVANCED_FACE('',(#8723),#8728,.T.); +#8723 = FACE_BOUND('',#8724,.T.); +#8724 = EDGE_LOOP('',(#8725,#8726,#8727)); +#8725 = ORIENTED_EDGE('',*,*,#8447,.T.); +#8726 = ORIENTED_EDGE('',*,*,#8423,.T.); +#8727 = ORIENTED_EDGE('',*,*,#8464,.T.); +#8728 = PLANE('',#8729); +#8729 = AXIS2_PLACEMENT_3D('',#8730,#8731,#8732); +#8730 = CARTESIAN_POINT('',(9.237604307034E-02,0.,1.5E-02)); +#8731 = DIRECTION('',(-0.,-0.,-1.)); +#8732 = DIRECTION('',(-1.,0.,0.)); +#8733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#8737)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#8734,#8735,#8736)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#8734 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#8735 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#8736 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#8737 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#8734, + 'distance_accuracy_value','confusion accuracy'); +#8738 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#8739,#8741); +#8739 = ( REPRESENTATION_RELATIONSHIP('','',#7209,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#8740) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#8740 = ITEM_DEFINED_TRANSFORMATION('','',#11,#79); +#8741 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #8742); +#8742 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('17','D4','',#5,#7204,$); +#8743 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7206)); +#8744 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#8745,#8747); +#8745 = ( REPRESENTATION_RELATIONSHIP('','',#7209,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#8746) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#8746 = ITEM_DEFINED_TRANSFORMATION('','',#11,#83); +#8747 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #8748); +#8748 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('18','D5','',#5,#7204,$); +#8749 = SHAPE_DEFINITION_REPRESENTATION(#8750,#8756); +#8750 = PRODUCT_DEFINITION_SHAPE('','',#8751); +#8751 = PRODUCT_DEFINITION('design','',#8752,#8755); +#8752 = PRODUCT_DEFINITION_FORMATION('','',#8753); +#8753 = PRODUCT('BarrelJack_CUI_PJ-063AH_Horizontal', + 'BarrelJack_CUI_PJ-063AH_Horizontal','',(#8754)); +#8754 = PRODUCT_CONTEXT('',#2,'mechanical'); +#8755 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#8756 = SHAPE_REPRESENTATION('',(#11,#8757,#10275),#11442); +#8757 = MANIFOLD_SOLID_BREP('',#8758); +#8758 = CLOSED_SHELL('',(#8759,#8799,#8830,#8861,#8878,#8895,#8926,#8957 + ,#9084,#9115,#9139,#9170,#9194,#9218,#9249,#9273,#9304,#9328,#9352, + #9376,#9400,#9417,#9441,#9465,#9489,#9513,#9537,#9561,#9578,#9595, + #9612,#9634,#9651,#9682,#9706,#9737,#9864,#9881,#9898,#9922,#9946, + #9977,#10001,#10025,#10049,#10073,#10090,#10114,#10138,#10162,#10186 + ,#10210,#10234,#10251)); +#8759 = ADVANCED_FACE('',(#8760),#8794,.T.); +#8760 = FACE_BOUND('',#8761,.T.); +#8761 = EDGE_LOOP('',(#8762,#8772,#8780,#8788)); +#8762 = ORIENTED_EDGE('',*,*,#8763,.T.); +#8763 = EDGE_CURVE('',#8764,#8766,#8768,.T.); +#8764 = VERTEX_POINT('',#8765); +#8765 = CARTESIAN_POINT('',(-4.9,-10.8,8.6)); +#8766 = VERTEX_POINT('',#8767); +#8767 = CARTESIAN_POINT('',(-4.9,-10.8,8.9)); +#8768 = LINE('',#8769,#8770); +#8769 = CARTESIAN_POINT('',(-4.9,-10.8,8.6)); +#8770 = VECTOR('',#8771,1.); +#8771 = DIRECTION('',(0.,0.,1.)); +#8772 = ORIENTED_EDGE('',*,*,#8773,.T.); +#8773 = EDGE_CURVE('',#8766,#8774,#8776,.T.); +#8774 = VERTEX_POINT('',#8775); +#8775 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#8776 = LINE('',#8777,#8778); +#8777 = CARTESIAN_POINT('',(-4.9,-10.8,8.9)); +#8778 = VECTOR('',#8779,1.); +#8779 = DIRECTION('',(0.,1.,0.)); +#8780 = ORIENTED_EDGE('',*,*,#8781,.F.); +#8781 = EDGE_CURVE('',#8782,#8774,#8784,.T.); +#8782 = VERTEX_POINT('',#8783); +#8783 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#8784 = LINE('',#8785,#8786); +#8785 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#8786 = VECTOR('',#8787,1.); +#8787 = DIRECTION('',(0.,0.,1.)); +#8788 = ORIENTED_EDGE('',*,*,#8789,.F.); +#8789 = EDGE_CURVE('',#8764,#8782,#8790,.T.); +#8790 = LINE('',#8791,#8792); +#8791 = CARTESIAN_POINT('',(-4.9,-10.8,8.6)); +#8792 = VECTOR('',#8793,1.); +#8793 = DIRECTION('',(0.,1.,0.)); +#8794 = PLANE('',#8795); +#8795 = AXIS2_PLACEMENT_3D('',#8796,#8797,#8798); +#8796 = CARTESIAN_POINT('',(-4.9,-10.8,8.6)); +#8797 = DIRECTION('',(-1.,0.,0.)); +#8798 = DIRECTION('',(0.,1.,0.)); +#8799 = ADVANCED_FACE('',(#8800),#8825,.T.); +#8800 = FACE_BOUND('',#8801,.T.); +#8801 = EDGE_LOOP('',(#8802,#8810,#8818,#8824)); +#8802 = ORIENTED_EDGE('',*,*,#8803,.F.); +#8803 = EDGE_CURVE('',#8804,#8764,#8806,.T.); +#8804 = VERTEX_POINT('',#8805); +#8805 = CARTESIAN_POINT('',(-4.899997830396,-10.8,8.6)); +#8806 = LINE('',#8807,#8808); +#8807 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#8808 = VECTOR('',#8809,1.); +#8809 = DIRECTION('',(-1.,0.,0.)); +#8810 = ORIENTED_EDGE('',*,*,#8811,.T.); +#8811 = EDGE_CURVE('',#8804,#8812,#8814,.T.); +#8812 = VERTEX_POINT('',#8813); +#8813 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.9)); +#8814 = LINE('',#8815,#8816); +#8815 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#8816 = VECTOR('',#8817,1.); +#8817 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#8818 = ORIENTED_EDGE('',*,*,#8819,.T.); +#8819 = EDGE_CURVE('',#8812,#8766,#8820,.T.); +#8820 = LINE('',#8821,#8822); +#8821 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#8822 = VECTOR('',#8823,1.); +#8823 = DIRECTION('',(-1.,0.,0.)); +#8824 = ORIENTED_EDGE('',*,*,#8763,.F.); +#8825 = PLANE('',#8826); +#8826 = AXIS2_PLACEMENT_3D('',#8827,#8828,#8829); +#8827 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#8828 = DIRECTION('',(0.,-1.,0.)); +#8829 = DIRECTION('',(-1.,0.,0.)); +#8830 = ADVANCED_FACE('',(#8831),#8856,.T.); +#8831 = FACE_BOUND('',#8832,.T.); +#8832 = EDGE_LOOP('',(#8833,#8841,#8842,#8850)); +#8833 = ORIENTED_EDGE('',*,*,#8834,.F.); +#8834 = EDGE_CURVE('',#8782,#8835,#8837,.T.); +#8835 = VERTEX_POINT('',#8836); +#8836 = CARTESIAN_POINT('',(-4.899997830396,-2.2,8.6)); +#8837 = LINE('',#8838,#8839); +#8838 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#8839 = VECTOR('',#8840,1.); +#8840 = DIRECTION('',(1.,0.,0.)); +#8841 = ORIENTED_EDGE('',*,*,#8781,.T.); +#8842 = ORIENTED_EDGE('',*,*,#8843,.T.); +#8843 = EDGE_CURVE('',#8774,#8844,#8846,.T.); +#8844 = VERTEX_POINT('',#8845); +#8845 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.9)); +#8846 = LINE('',#8847,#8848); +#8847 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#8848 = VECTOR('',#8849,1.); +#8849 = DIRECTION('',(1.,0.,0.)); +#8850 = ORIENTED_EDGE('',*,*,#8851,.T.); +#8851 = EDGE_CURVE('',#8844,#8835,#8852,.T.); +#8852 = LINE('',#8853,#8854); +#8853 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#8854 = VECTOR('',#8855,1.); +#8855 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#8856 = PLANE('',#8857); +#8857 = AXIS2_PLACEMENT_3D('',#8858,#8859,#8860); +#8858 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#8859 = DIRECTION('',(0.,1.,0.)); +#8860 = DIRECTION('',(1.,0.,0.)); +#8861 = ADVANCED_FACE('',(#8862),#8873,.F.); +#8862 = FACE_BOUND('',#8863,.F.); +#8863 = EDGE_LOOP('',(#8864,#8865,#8866,#8867)); +#8864 = ORIENTED_EDGE('',*,*,#8834,.F.); +#8865 = ORIENTED_EDGE('',*,*,#8789,.F.); +#8866 = ORIENTED_EDGE('',*,*,#8803,.F.); +#8867 = ORIENTED_EDGE('',*,*,#8868,.T.); +#8868 = EDGE_CURVE('',#8804,#8835,#8869,.T.); +#8869 = LINE('',#8870,#8871); +#8870 = CARTESIAN_POINT('',(-4.899997830396,-5.1,8.6)); +#8871 = VECTOR('',#8872,1.); +#8872 = DIRECTION('',(2.646971722006E-23,1.,0.)); +#8873 = PLANE('',#8874); +#8874 = AXIS2_PLACEMENT_3D('',#8875,#8876,#8877); +#8875 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#8876 = DIRECTION('',(0.,0.,1.)); +#8877 = DIRECTION('',(1.,0.,-0.)); +#8878 = ADVANCED_FACE('',(#8879),#8890,.T.); +#8879 = FACE_BOUND('',#8880,.T.); +#8880 = EDGE_LOOP('',(#8881,#8887,#8888,#8889)); +#8881 = ORIENTED_EDGE('',*,*,#8882,.T.); +#8882 = EDGE_CURVE('',#8812,#8844,#8883,.T.); +#8883 = LINE('',#8884,#8885); +#8884 = CARTESIAN_POINT('',(-4.899997758871,-5.1,8.9)); +#8885 = VECTOR('',#8886,1.); +#8886 = DIRECTION('',(2.646971722006E-23,1.,0.)); +#8887 = ORIENTED_EDGE('',*,*,#8843,.F.); +#8888 = ORIENTED_EDGE('',*,*,#8773,.F.); +#8889 = ORIENTED_EDGE('',*,*,#8819,.F.); +#8890 = PLANE('',#8891); +#8891 = AXIS2_PLACEMENT_3D('',#8892,#8893,#8894); +#8892 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#8893 = DIRECTION('',(0.,0.,1.)); +#8894 = DIRECTION('',(1.,0.,-0.)); +#8895 = ADVANCED_FACE('',(#8896),#8921,.F.); +#8896 = FACE_BOUND('',#8897,.T.); +#8897 = EDGE_LOOP('',(#8898,#8899,#8907,#8915)); +#8898 = ORIENTED_EDGE('',*,*,#8811,.F.); +#8899 = ORIENTED_EDGE('',*,*,#8900,.F.); +#8900 = EDGE_CURVE('',#8901,#8804,#8903,.T.); +#8901 = VERTEX_POINT('',#8902); +#8902 = CARTESIAN_POINT('',(-4.599997830396,-10.8,8.6)); +#8903 = LINE('',#8904,#8905); +#8904 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#8905 = VECTOR('',#8906,1.); +#8906 = DIRECTION('',(-1.,0.,0.)); +#8907 = ORIENTED_EDGE('',*,*,#8908,.T.); +#8908 = EDGE_CURVE('',#8901,#8909,#8911,.T.); +#8909 = VERTEX_POINT('',#8910); +#8910 = CARTESIAN_POINT('',(-4.599997758871,-10.8,8.9)); +#8911 = LINE('',#8912,#8913); +#8912 = CARTESIAN_POINT('',(-4.599999880791,-10.8,1.096722851146E-06)); +#8913 = VECTOR('',#8914,1.); +#8914 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#8915 = ORIENTED_EDGE('',*,*,#8916,.T.); +#8916 = EDGE_CURVE('',#8909,#8812,#8917,.T.); +#8917 = LINE('',#8918,#8919); +#8918 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#8919 = VECTOR('',#8920,1.); +#8920 = DIRECTION('',(-1.,0.,0.)); +#8921 = PLANE('',#8922); +#8922 = AXIS2_PLACEMENT_3D('',#8923,#8924,#8925); +#8923 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#8924 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#8925 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#8926 = ADVANCED_FACE('',(#8927),#8952,.F.); +#8927 = FACE_BOUND('',#8928,.T.); +#8928 = EDGE_LOOP('',(#8929,#8930,#8938,#8946)); +#8929 = ORIENTED_EDGE('',*,*,#8851,.F.); +#8930 = ORIENTED_EDGE('',*,*,#8931,.T.); +#8931 = EDGE_CURVE('',#8844,#8932,#8934,.T.); +#8932 = VERTEX_POINT('',#8933); +#8933 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.9)); +#8934 = LINE('',#8935,#8936); +#8935 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#8936 = VECTOR('',#8937,1.); +#8937 = DIRECTION('',(1.,0.,0.)); +#8938 = ORIENTED_EDGE('',*,*,#8939,.T.); +#8939 = EDGE_CURVE('',#8932,#8940,#8942,.T.); +#8940 = VERTEX_POINT('',#8941); +#8941 = CARTESIAN_POINT('',(-4.599997830396,-2.2,8.6)); +#8942 = LINE('',#8943,#8944); +#8943 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.900001096723)); +#8944 = VECTOR('',#8945,1.); +#8945 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#8946 = ORIENTED_EDGE('',*,*,#8947,.F.); +#8947 = EDGE_CURVE('',#8835,#8940,#8948,.T.); +#8948 = LINE('',#8949,#8950); +#8949 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#8950 = VECTOR('',#8951,1.); +#8951 = DIRECTION('',(1.,0.,0.)); +#8952 = PLANE('',#8953); +#8953 = AXIS2_PLACEMENT_3D('',#8954,#8955,#8956); +#8954 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#8955 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#8956 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#8957 = ADVANCED_FACE('',(#8958),#9079,.F.); +#8958 = FACE_BOUND('',#8959,.T.); +#8959 = EDGE_LOOP('',(#8960,#8970,#8978,#8986,#8994,#9002,#9010,#9018, + #9026,#9032,#9033,#9041,#9049,#9057,#9065,#9073)); +#8960 = ORIENTED_EDGE('',*,*,#8961,.F.); +#8961 = EDGE_CURVE('',#8962,#8964,#8966,.T.); +#8962 = VERTEX_POINT('',#8963); +#8963 = CARTESIAN_POINT('',(-4.900000596045,-6.5,-2.999998831752)); +#8964 = VERTEX_POINT('',#8965); +#8965 = CARTESIAN_POINT('',(-4.900000476836,-6.,-2.499998831752)); +#8966 = LINE('',#8967,#8968); +#8967 = CARTESIAN_POINT('',(-4.900000655649,-6.75,-3.249998831752)); +#8968 = VECTOR('',#8969,1.); +#8969 = DIRECTION('',(1.68586994684E-07,0.707106781187,0.707106781187)); +#8970 = ORIENTED_EDGE('',*,*,#8971,.F.); +#8971 = EDGE_CURVE('',#8972,#8962,#8974,.T.); +#8972 = VERTEX_POINT('',#8973); +#8973 = CARTESIAN_POINT('',(-4.900000596045,-7.5,-2.999998831752)); +#8974 = LINE('',#8975,#8976); +#8975 = CARTESIAN_POINT('',(-4.900000596045,-8.,-2.999998831752)); +#8976 = VECTOR('',#8977,1.); +#8977 = DIRECTION('',(3.488244315274E-30,1.,2.646971654213E-23)); +#8978 = ORIENTED_EDGE('',*,*,#8979,.T.); +#8979 = EDGE_CURVE('',#8972,#8980,#8982,.T.); +#8980 = VERTEX_POINT('',#8981); +#8981 = CARTESIAN_POINT('',(-4.900000476836,-8.,-2.499998831752)); +#8982 = LINE('',#8983,#8984); +#8983 = CARTESIAN_POINT('',(-4.90000053644,-7.75,-2.749998831752)); +#8984 = VECTOR('',#8985,1.); +#8985 = DIRECTION('',(1.68586994684E-07,-0.707106781187,0.707106781187) + ); +#8986 = ORIENTED_EDGE('',*,*,#8987,.F.); +#8987 = EDGE_CURVE('',#8988,#8980,#8990,.T.); +#8988 = VERTEX_POINT('',#8989); +#8989 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255468E-06)); +#8990 = LINE('',#8991,#8992); +#8991 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#8992 = VECTOR('',#8993,1.); +#8993 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#8994 = ORIENTED_EDGE('',*,*,#8995,.T.); +#8995 = EDGE_CURVE('',#8988,#8996,#8998,.T.); +#8996 = VERTEX_POINT('',#8997); +#8997 = CARTESIAN_POINT('',(-4.899999165537,-8.,3.000001168248)); +#8998 = LINE('',#8999,#9000); +#8999 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#9000 = VECTOR('',#9001,1.); +#9001 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9002 = ORIENTED_EDGE('',*,*,#9003,.T.); +#9003 = EDGE_CURVE('',#8996,#9004,#9006,.T.); +#9004 = VERTEX_POINT('',#9005); +#9005 = CARTESIAN_POINT('',(-4.899999165537,-8.3,3.000001168248)); +#9006 = LINE('',#9007,#9008); +#9007 = CARTESIAN_POINT('',(-4.899999165537,-8.,3.000001168248)); +#9008 = VECTOR('',#9009,1.); +#9009 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#9010 = ORIENTED_EDGE('',*,*,#9011,.T.); +#9011 = EDGE_CURVE('',#9004,#9012,#9014,.T.); +#9012 = VERTEX_POINT('',#9013); +#9013 = CARTESIAN_POINT('',(-4.899999880791,-8.3,1.168248255468E-06)); +#9014 = LINE('',#9015,#9016); +#9015 = CARTESIAN_POINT('',(-4.899999165537,-8.3,3.000001168248)); +#9016 = VECTOR('',#9017,1.); +#9017 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9018 = ORIENTED_EDGE('',*,*,#9019,.T.); +#9019 = EDGE_CURVE('',#9012,#9020,#9022,.T.); +#9020 = VERTEX_POINT('',#9021); +#9021 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255468E-06)); +#9022 = LINE('',#9023,#9024); +#9023 = CARTESIAN_POINT('',(-4.899999880791,-8.3,1.168248255423E-06)); +#9024 = VECTOR('',#9025,1.); +#9025 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#9026 = ORIENTED_EDGE('',*,*,#9027,.T.); +#9027 = EDGE_CURVE('',#9020,#8804,#9028,.T.); +#9028 = LINE('',#9029,#9030); +#9029 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#9030 = VECTOR('',#9031,1.); +#9031 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9032 = ORIENTED_EDGE('',*,*,#8868,.T.); +#9033 = ORIENTED_EDGE('',*,*,#9034,.T.); +#9034 = EDGE_CURVE('',#8835,#9035,#9037,.T.); +#9035 = VERTEX_POINT('',#9036); +#9036 = CARTESIAN_POINT('',(-4.899999880791,-2.2,1.168248255468E-06)); +#9037 = LINE('',#9038,#9039); +#9038 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#9039 = VECTOR('',#9040,1.); +#9040 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9041 = ORIENTED_EDGE('',*,*,#9042,.T.); +#9042 = EDGE_CURVE('',#9035,#9043,#9045,.T.); +#9043 = VERTEX_POINT('',#9044); +#9044 = CARTESIAN_POINT('',(-4.899999880791,-5.7,1.168248255468E-06)); +#9045 = LINE('',#9046,#9047); +#9046 = CARTESIAN_POINT('',(-4.899999880791,-2.2,1.168248255423E-06)); +#9047 = VECTOR('',#9048,1.); +#9048 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#9049 = ORIENTED_EDGE('',*,*,#9050,.T.); +#9050 = EDGE_CURVE('',#9043,#9051,#9053,.T.); +#9051 = VERTEX_POINT('',#9052); +#9052 = CARTESIAN_POINT('',(-4.899999165537,-5.7,3.000001168248)); +#9053 = LINE('',#9054,#9055); +#9054 = CARTESIAN_POINT('',(-4.899999880791,-5.7,1.168248255423E-06)); +#9055 = VECTOR('',#9056,1.); +#9056 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9057 = ORIENTED_EDGE('',*,*,#9058,.T.); +#9058 = EDGE_CURVE('',#9051,#9059,#9061,.T.); +#9059 = VERTEX_POINT('',#9060); +#9060 = CARTESIAN_POINT('',(-4.899999165537,-6.,3.000001168248)); +#9061 = LINE('',#9062,#9063); +#9062 = CARTESIAN_POINT('',(-4.899999165537,-5.7,3.000001168248)); +#9063 = VECTOR('',#9064,1.); +#9064 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#9065 = ORIENTED_EDGE('',*,*,#9066,.T.); +#9066 = EDGE_CURVE('',#9059,#9067,#9069,.T.); +#9067 = VERTEX_POINT('',#9068); +#9068 = CARTESIAN_POINT('',(-4.899999880791,-6.,1.168248255468E-06)); +#9069 = LINE('',#9070,#9071); +#9070 = CARTESIAN_POINT('',(-4.899999165537,-6.,3.000001168248)); +#9071 = VECTOR('',#9072,1.); +#9072 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9073 = ORIENTED_EDGE('',*,*,#9074,.F.); +#9074 = EDGE_CURVE('',#8964,#9067,#9075,.T.); +#9075 = LINE('',#9076,#9077); +#9076 = CARTESIAN_POINT('',(-4.900000596045,-6.,-2.999998831752)); +#9077 = VECTOR('',#9078,1.); +#9078 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9079 = PLANE('',#9080); +#9080 = AXIS2_PLACEMENT_3D('',#9081,#9082,#9083); +#9081 = CARTESIAN_POINT('',(-4.900000596045,-8.,-2.999998831752)); +#9082 = DIRECTION('',(1.,-2.646971722006E-23,-2.384180143219E-07)); +#9083 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9084 = ADVANCED_FACE('',(#9085),#9110,.F.); +#9085 = FACE_BOUND('',#9086,.T.); +#9086 = EDGE_LOOP('',(#9087,#9095,#9096,#9104)); +#9087 = ORIENTED_EDGE('',*,*,#9088,.T.); +#9088 = EDGE_CURVE('',#9089,#8844,#9091,.T.); +#9089 = VERTEX_POINT('',#9090); +#9090 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#9091 = LINE('',#9092,#9093); +#9092 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#9093 = VECTOR('',#9094,1.); +#9094 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9095 = ORIENTED_EDGE('',*,*,#8882,.F.); +#9096 = ORIENTED_EDGE('',*,*,#9097,.T.); +#9097 = EDGE_CURVE('',#8812,#9098,#9100,.T.); +#9098 = VERTEX_POINT('',#9099); +#9099 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.900001168248)); +#9100 = LINE('',#9101,#9102); +#9101 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#9102 = VECTOR('',#9103,1.); +#9103 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9104 = ORIENTED_EDGE('',*,*,#9105,.T.); +#9105 = EDGE_CURVE('',#9098,#9089,#9106,.T.); +#9106 = LINE('',#9107,#9108); +#9107 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.900001168248)); +#9108 = VECTOR('',#9109,1.); +#9109 = DIRECTION('',(3.488244315274E-30,1.,2.646971654213E-23)); +#9110 = PLANE('',#9111); +#9111 = AXIS2_PLACEMENT_3D('',#9112,#9113,#9114); +#9112 = CARTESIAN_POINT('',(-4.900000596045,-8.,-2.999998831752)); +#9113 = DIRECTION('',(1.,-2.646971722006E-23,-2.384180143219E-07)); +#9114 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9115 = ADVANCED_FACE('',(#9116),#9134,.F.); +#9116 = FACE_BOUND('',#9117,.T.); +#9117 = EDGE_LOOP('',(#9118,#9119,#9120,#9128)); +#9118 = ORIENTED_EDGE('',*,*,#9097,.F.); +#9119 = ORIENTED_EDGE('',*,*,#8916,.F.); +#9120 = ORIENTED_EDGE('',*,*,#9121,.T.); +#9121 = EDGE_CURVE('',#8909,#9122,#9124,.T.); +#9122 = VERTEX_POINT('',#9123); +#9123 = CARTESIAN_POINT('',(-4.599997758871,-10.8,8.900001096723)); +#9124 = LINE('',#9125,#9126); +#9125 = CARTESIAN_POINT('',(-4.599999880791,-10.8,1.096722851146E-06)); +#9126 = VECTOR('',#9127,1.); +#9127 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9128 = ORIENTED_EDGE('',*,*,#9129,.F.); +#9129 = EDGE_CURVE('',#9098,#9122,#9130,.T.); +#9130 = LINE('',#9131,#9132); +#9131 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.900001168248)); +#9132 = VECTOR('',#9133,1.); +#9133 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9134 = PLANE('',#9135); +#9135 = AXIS2_PLACEMENT_3D('',#9136,#9137,#9138); +#9136 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#9137 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#9138 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#9139 = ADVANCED_FACE('',(#9140),#9165,.T.); +#9140 = FACE_BOUND('',#9141,.T.); +#9141 = EDGE_LOOP('',(#9142,#9150,#9158,#9164)); +#9142 = ORIENTED_EDGE('',*,*,#9143,.F.); +#9143 = EDGE_CURVE('',#9144,#8901,#9146,.T.); +#9144 = VERTEX_POINT('',#9145); +#9145 = CARTESIAN_POINT('',(4.6,-10.8,8.6)); +#9146 = LINE('',#9147,#9148); +#9147 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#9148 = VECTOR('',#9149,1.); +#9149 = DIRECTION('',(-1.,0.,0.)); +#9150 = ORIENTED_EDGE('',*,*,#9151,.T.); +#9151 = EDGE_CURVE('',#9144,#9152,#9154,.T.); +#9152 = VERTEX_POINT('',#9153); +#9153 = CARTESIAN_POINT('',(4.6,-10.8,8.9)); +#9154 = LINE('',#9155,#9156); +#9155 = CARTESIAN_POINT('',(4.6,-10.8,1.165734175856E-15)); +#9156 = VECTOR('',#9157,1.); +#9157 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#9158 = ORIENTED_EDGE('',*,*,#9159,.T.); +#9159 = EDGE_CURVE('',#9152,#8909,#9160,.T.); +#9160 = LINE('',#9161,#9162); +#9161 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#9162 = VECTOR('',#9163,1.); +#9163 = DIRECTION('',(-1.,0.,0.)); +#9164 = ORIENTED_EDGE('',*,*,#8908,.F.); +#9165 = PLANE('',#9166); +#9166 = AXIS2_PLACEMENT_3D('',#9167,#9168,#9169); +#9167 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#9168 = DIRECTION('',(0.,-1.,0.)); +#9169 = DIRECTION('',(-1.,0.,0.)); +#9170 = ADVANCED_FACE('',(#9171),#9189,.F.); +#9171 = FACE_BOUND('',#9172,.T.); +#9172 = EDGE_LOOP('',(#9173,#9174,#9182,#9188)); +#9173 = ORIENTED_EDGE('',*,*,#9027,.F.); +#9174 = ORIENTED_EDGE('',*,*,#9175,.T.); +#9175 = EDGE_CURVE('',#9020,#9176,#9178,.T.); +#9176 = VERTEX_POINT('',#9177); +#9177 = CARTESIAN_POINT('',(-4.599999880791,-10.8,1.096722851202E-06)); +#9178 = LINE('',#9179,#9180); +#9179 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#9180 = VECTOR('',#9181,1.); +#9181 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9182 = ORIENTED_EDGE('',*,*,#9183,.T.); +#9183 = EDGE_CURVE('',#9176,#8901,#9184,.T.); +#9184 = LINE('',#9185,#9186); +#9185 = CARTESIAN_POINT('',(-4.599999880791,-10.8,1.096722851146E-06)); +#9186 = VECTOR('',#9187,1.); +#9187 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9188 = ORIENTED_EDGE('',*,*,#8900,.T.); +#9189 = PLANE('',#9190); +#9190 = AXIS2_PLACEMENT_3D('',#9191,#9192,#9193); +#9191 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#9192 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#9193 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#9194 = ADVANCED_FACE('',(#9195),#9213,.F.); +#9195 = FACE_BOUND('',#9196,.T.); +#9196 = EDGE_LOOP('',(#9197,#9198,#9199,#9207)); +#9197 = ORIENTED_EDGE('',*,*,#9034,.F.); +#9198 = ORIENTED_EDGE('',*,*,#8947,.T.); +#9199 = ORIENTED_EDGE('',*,*,#9200,.T.); +#9200 = EDGE_CURVE('',#8940,#9201,#9203,.T.); +#9201 = VERTEX_POINT('',#9202); +#9202 = CARTESIAN_POINT('',(-4.599999880791,-2.2,1.096722851202E-06)); +#9203 = LINE('',#9204,#9205); +#9204 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.900001096723)); +#9205 = VECTOR('',#9206,1.); +#9206 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9207 = ORIENTED_EDGE('',*,*,#9208,.F.); +#9208 = EDGE_CURVE('',#9035,#9201,#9209,.T.); +#9209 = LINE('',#9210,#9211); +#9210 = CARTESIAN_POINT('',(-4.899999880791,-2.2,1.168248255423E-06)); +#9211 = VECTOR('',#9212,1.); +#9212 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9213 = PLANE('',#9214); +#9214 = AXIS2_PLACEMENT_3D('',#9215,#9216,#9217); +#9215 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#9216 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#9217 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#9218 = ADVANCED_FACE('',(#9219),#9244,.T.); +#9219 = FACE_BOUND('',#9220,.T.); +#9220 = EDGE_LOOP('',(#9221,#9229,#9230,#9238)); +#9221 = ORIENTED_EDGE('',*,*,#9222,.F.); +#9222 = EDGE_CURVE('',#8940,#9223,#9225,.T.); +#9223 = VERTEX_POINT('',#9224); +#9224 = CARTESIAN_POINT('',(4.6,-2.2,8.6)); +#9225 = LINE('',#9226,#9227); +#9226 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#9227 = VECTOR('',#9228,1.); +#9228 = DIRECTION('',(1.,0.,0.)); +#9229 = ORIENTED_EDGE('',*,*,#8939,.F.); +#9230 = ORIENTED_EDGE('',*,*,#9231,.T.); +#9231 = EDGE_CURVE('',#8932,#9232,#9234,.T.); +#9232 = VERTEX_POINT('',#9233); +#9233 = CARTESIAN_POINT('',(4.6,-2.2,8.9)); +#9234 = LINE('',#9235,#9236); +#9235 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#9236 = VECTOR('',#9237,1.); +#9237 = DIRECTION('',(1.,0.,0.)); +#9238 = ORIENTED_EDGE('',*,*,#9239,.T.); +#9239 = EDGE_CURVE('',#9232,#9223,#9240,.T.); +#9240 = LINE('',#9241,#9242); +#9241 = CARTESIAN_POINT('',(4.6,-2.2,8.9)); +#9242 = VECTOR('',#9243,1.); +#9243 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#9244 = PLANE('',#9245); +#9245 = AXIS2_PLACEMENT_3D('',#9246,#9247,#9248); +#9246 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#9247 = DIRECTION('',(0.,1.,0.)); +#9248 = DIRECTION('',(1.,0.,0.)); +#9249 = ADVANCED_FACE('',(#9250),#9268,.F.); +#9250 = FACE_BOUND('',#9251,.T.); +#9251 = EDGE_LOOP('',(#9252,#9253,#9261,#9267)); +#9252 = ORIENTED_EDGE('',*,*,#9088,.F.); +#9253 = ORIENTED_EDGE('',*,*,#9254,.T.); +#9254 = EDGE_CURVE('',#9089,#9255,#9257,.T.); +#9255 = VERTEX_POINT('',#9256); +#9256 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.900001096723)); +#9257 = LINE('',#9258,#9259); +#9258 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#9259 = VECTOR('',#9260,1.); +#9260 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9261 = ORIENTED_EDGE('',*,*,#9262,.T.); +#9262 = EDGE_CURVE('',#9255,#8932,#9263,.T.); +#9263 = LINE('',#9264,#9265); +#9264 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.900001096723)); +#9265 = VECTOR('',#9266,1.); +#9266 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9267 = ORIENTED_EDGE('',*,*,#8931,.F.); +#9268 = PLANE('',#9269); +#9269 = AXIS2_PLACEMENT_3D('',#9270,#9271,#9272); +#9270 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#9271 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#9272 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#9273 = ADVANCED_FACE('',(#9274),#9299,.T.); +#9274 = FACE_BOUND('',#9275,.F.); +#9275 = EDGE_LOOP('',(#9276,#9277,#9285,#9293)); +#9276 = ORIENTED_EDGE('',*,*,#8961,.F.); +#9277 = ORIENTED_EDGE('',*,*,#9278,.T.); +#9278 = EDGE_CURVE('',#8962,#9279,#9281,.T.); +#9279 = VERTEX_POINT('',#9280); +#9280 = CARTESIAN_POINT('',(-4.600000596045,-6.5,-2.999998903277)); +#9281 = LINE('',#9282,#9283); +#9282 = CARTESIAN_POINT('',(-4.900000596045,-6.5,-2.999998831752)); +#9283 = VECTOR('',#9284,1.); +#9284 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9285 = ORIENTED_EDGE('',*,*,#9286,.T.); +#9286 = EDGE_CURVE('',#9279,#9287,#9289,.T.); +#9287 = VERTEX_POINT('',#9288); +#9288 = CARTESIAN_POINT('',(-4.600000476836,-6.,-2.499998903277)); +#9289 = LINE('',#9290,#9291); +#9290 = CARTESIAN_POINT('',(-4.600000655649,-6.75,-3.249998903277)); +#9291 = VECTOR('',#9292,1.); +#9292 = DIRECTION('',(1.68586994684E-07,0.707106781187,0.707106781187)); +#9293 = ORIENTED_EDGE('',*,*,#9294,.F.); +#9294 = EDGE_CURVE('',#8964,#9287,#9295,.T.); +#9295 = LINE('',#9296,#9297); +#9296 = CARTESIAN_POINT('',(-4.900000476836,-6.,-2.499998831752)); +#9297 = VECTOR('',#9298,1.); +#9298 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9299 = PLANE('',#9300); +#9300 = AXIS2_PLACEMENT_3D('',#9301,#9302,#9303); +#9301 = CARTESIAN_POINT('',(-4.90000053644,-6.25,-2.749998831752)); +#9302 = DIRECTION('',(-1.685869947028E-07,0.707106781187,-0.707106781187 + )); +#9303 = DIRECTION('',(-1.,-1.323085315946E-17,2.384180143352E-07)); +#9304 = ADVANCED_FACE('',(#9305),#9323,.T.); +#9305 = FACE_BOUND('',#9306,.F.); +#9306 = EDGE_LOOP('',(#9307,#9308,#9309,#9317)); +#9307 = ORIENTED_EDGE('',*,*,#9074,.F.); +#9308 = ORIENTED_EDGE('',*,*,#9294,.T.); +#9309 = ORIENTED_EDGE('',*,*,#9310,.T.); +#9310 = EDGE_CURVE('',#9287,#9311,#9313,.T.); +#9311 = VERTEX_POINT('',#9312); +#9312 = CARTESIAN_POINT('',(-4.599999880791,-6.,1.096722851202E-06)); +#9313 = LINE('',#9314,#9315); +#9314 = CARTESIAN_POINT('',(-4.600000596045,-6.,-2.999998903277)); +#9315 = VECTOR('',#9316,1.); +#9316 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9317 = ORIENTED_EDGE('',*,*,#9318,.F.); +#9318 = EDGE_CURVE('',#9067,#9311,#9319,.T.); +#9319 = LINE('',#9320,#9321); +#9320 = CARTESIAN_POINT('',(-4.899999880791,-6.,1.168248255423E-06)); +#9321 = VECTOR('',#9322,1.); +#9322 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9323 = PLANE('',#9324); +#9324 = AXIS2_PLACEMENT_3D('',#9325,#9326,#9327); +#9325 = CARTESIAN_POINT('',(-4.900000596045,-6.,-2.999998831752)); +#9326 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#9327 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#9328 = ADVANCED_FACE('',(#9329),#9347,.F.); +#9329 = FACE_BOUND('',#9330,.T.); +#9330 = EDGE_LOOP('',(#9331,#9339,#9345,#9346)); +#9331 = ORIENTED_EDGE('',*,*,#9332,.T.); +#9332 = EDGE_CURVE('',#9059,#9333,#9335,.T.); +#9333 = VERTEX_POINT('',#9334); +#9334 = CARTESIAN_POINT('',(-4.599999165537,-6.,3.000001096723)); +#9335 = LINE('',#9336,#9337); +#9336 = CARTESIAN_POINT('',(-4.899999165537,-6.,3.000001168248)); +#9337 = VECTOR('',#9338,1.); +#9338 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9339 = ORIENTED_EDGE('',*,*,#9340,.T.); +#9340 = EDGE_CURVE('',#9333,#9311,#9341,.T.); +#9341 = LINE('',#9342,#9343); +#9342 = CARTESIAN_POINT('',(-4.599999165537,-6.,3.000001096723)); +#9343 = VECTOR('',#9344,1.); +#9344 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9345 = ORIENTED_EDGE('',*,*,#9318,.F.); +#9346 = ORIENTED_EDGE('',*,*,#9066,.F.); +#9347 = PLANE('',#9348); +#9348 = AXIS2_PLACEMENT_3D('',#9349,#9350,#9351); +#9349 = CARTESIAN_POINT('',(-4.899999165537,-6.,3.000001168248)); +#9350 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#9351 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#9352 = ADVANCED_FACE('',(#9353),#9371,.F.); +#9353 = FACE_BOUND('',#9354,.T.); +#9354 = EDGE_LOOP('',(#9355,#9363,#9369,#9370)); +#9355 = ORIENTED_EDGE('',*,*,#9356,.T.); +#9356 = EDGE_CURVE('',#9051,#9357,#9359,.T.); +#9357 = VERTEX_POINT('',#9358); +#9358 = CARTESIAN_POINT('',(-4.599999165537,-5.7,3.000001096723)); +#9359 = LINE('',#9360,#9361); +#9360 = CARTESIAN_POINT('',(-4.899999165537,-5.7,3.000001168248)); +#9361 = VECTOR('',#9362,1.); +#9362 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9363 = ORIENTED_EDGE('',*,*,#9364,.T.); +#9364 = EDGE_CURVE('',#9357,#9333,#9365,.T.); +#9365 = LINE('',#9366,#9367); +#9366 = CARTESIAN_POINT('',(-4.599999165537,-5.7,3.000001096723)); +#9367 = VECTOR('',#9368,1.); +#9368 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#9369 = ORIENTED_EDGE('',*,*,#9332,.F.); +#9370 = ORIENTED_EDGE('',*,*,#9058,.F.); +#9371 = PLANE('',#9372); +#9372 = AXIS2_PLACEMENT_3D('',#9373,#9374,#9375); +#9373 = CARTESIAN_POINT('',(-4.899999165537,-5.7,3.000001168248)); +#9374 = DIRECTION('',(2.384180143219E-07,1.232595164408E-32,1.)); +#9375 = DIRECTION('',(-1.110223024625E-16,1.,2.646971688623E-23)); +#9376 = ADVANCED_FACE('',(#9377),#9395,.F.); +#9377 = FACE_BOUND('',#9378,.T.); +#9378 = EDGE_LOOP('',(#9379,#9387,#9393,#9394)); +#9379 = ORIENTED_EDGE('',*,*,#9380,.T.); +#9380 = EDGE_CURVE('',#9043,#9381,#9383,.T.); +#9381 = VERTEX_POINT('',#9382); +#9382 = CARTESIAN_POINT('',(-4.599999880791,-5.7,1.096722851202E-06)); +#9383 = LINE('',#9384,#9385); +#9384 = CARTESIAN_POINT('',(-4.899999880791,-5.7,1.168248255423E-06)); +#9385 = VECTOR('',#9386,1.); +#9386 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9387 = ORIENTED_EDGE('',*,*,#9388,.T.); +#9388 = EDGE_CURVE('',#9381,#9357,#9389,.T.); +#9389 = LINE('',#9390,#9391); +#9390 = CARTESIAN_POINT('',(-4.599999880791,-5.7,1.096722851146E-06)); +#9391 = VECTOR('',#9392,1.); +#9392 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9393 = ORIENTED_EDGE('',*,*,#9356,.F.); +#9394 = ORIENTED_EDGE('',*,*,#9050,.F.); +#9395 = PLANE('',#9396); +#9396 = AXIS2_PLACEMENT_3D('',#9397,#9398,#9399); +#9397 = CARTESIAN_POINT('',(-4.899999880791,-5.7,1.168248255423E-06)); +#9398 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#9399 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#9400 = ADVANCED_FACE('',(#9401),#9412,.F.); +#9401 = FACE_BOUND('',#9402,.T.); +#9402 = EDGE_LOOP('',(#9403,#9404,#9410,#9411)); +#9403 = ORIENTED_EDGE('',*,*,#9208,.T.); +#9404 = ORIENTED_EDGE('',*,*,#9405,.T.); +#9405 = EDGE_CURVE('',#9201,#9381,#9406,.T.); +#9406 = LINE('',#9407,#9408); +#9407 = CARTESIAN_POINT('',(-4.599999880791,-2.2,1.096722851146E-06)); +#9408 = VECTOR('',#9409,1.); +#9409 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#9410 = ORIENTED_EDGE('',*,*,#9380,.F.); +#9411 = ORIENTED_EDGE('',*,*,#9042,.F.); +#9412 = PLANE('',#9413); +#9413 = AXIS2_PLACEMENT_3D('',#9414,#9415,#9416); +#9414 = CARTESIAN_POINT('',(-4.899999880791,-2.2,1.168248255423E-06)); +#9415 = DIRECTION('',(2.384180143219E-07,1.232595164408E-32,1.)); +#9416 = DIRECTION('',(-1.110223024625E-16,1.,2.646971688623E-23)); +#9417 = ADVANCED_FACE('',(#9418),#9436,.F.); +#9418 = FACE_BOUND('',#9419,.T.); +#9419 = EDGE_LOOP('',(#9420,#9428,#9434,#9435)); +#9420 = ORIENTED_EDGE('',*,*,#9421,.T.); +#9421 = EDGE_CURVE('',#9012,#9422,#9424,.T.); +#9422 = VERTEX_POINT('',#9423); +#9423 = CARTESIAN_POINT('',(-4.599999880791,-8.3,1.096722851202E-06)); +#9424 = LINE('',#9425,#9426); +#9425 = CARTESIAN_POINT('',(-4.899999880791,-8.3,1.168248255423E-06)); +#9426 = VECTOR('',#9427,1.); +#9427 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9428 = ORIENTED_EDGE('',*,*,#9429,.T.); +#9429 = EDGE_CURVE('',#9422,#9176,#9430,.T.); +#9430 = LINE('',#9431,#9432); +#9431 = CARTESIAN_POINT('',(-4.599999880791,-8.3,1.096722851146E-06)); +#9432 = VECTOR('',#9433,1.); +#9433 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#9434 = ORIENTED_EDGE('',*,*,#9175,.F.); +#9435 = ORIENTED_EDGE('',*,*,#9019,.F.); +#9436 = PLANE('',#9437); +#9437 = AXIS2_PLACEMENT_3D('',#9438,#9439,#9440); +#9438 = CARTESIAN_POINT('',(-4.899999880791,-8.3,1.168248255423E-06)); +#9439 = DIRECTION('',(2.384180143219E-07,1.232595164408E-32,1.)); +#9440 = DIRECTION('',(-1.110223024625E-16,1.,2.646971688623E-23)); +#9441 = ADVANCED_FACE('',(#9442),#9460,.F.); +#9442 = FACE_BOUND('',#9443,.T.); +#9443 = EDGE_LOOP('',(#9444,#9452,#9458,#9459)); +#9444 = ORIENTED_EDGE('',*,*,#9445,.T.); +#9445 = EDGE_CURVE('',#9004,#9446,#9448,.T.); +#9446 = VERTEX_POINT('',#9447); +#9447 = CARTESIAN_POINT('',(-4.599999165537,-8.3,3.000001096723)); +#9448 = LINE('',#9449,#9450); +#9449 = CARTESIAN_POINT('',(-4.899999165537,-8.3,3.000001168248)); +#9450 = VECTOR('',#9451,1.); +#9451 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9452 = ORIENTED_EDGE('',*,*,#9453,.T.); +#9453 = EDGE_CURVE('',#9446,#9422,#9454,.T.); +#9454 = LINE('',#9455,#9456); +#9455 = CARTESIAN_POINT('',(-4.599999165537,-8.3,3.000001096723)); +#9456 = VECTOR('',#9457,1.); +#9457 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9458 = ORIENTED_EDGE('',*,*,#9421,.F.); +#9459 = ORIENTED_EDGE('',*,*,#9011,.F.); +#9460 = PLANE('',#9461); +#9461 = AXIS2_PLACEMENT_3D('',#9462,#9463,#9464); +#9462 = CARTESIAN_POINT('',(-4.899999165537,-8.3,3.000001168248)); +#9463 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#9464 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#9465 = ADVANCED_FACE('',(#9466),#9484,.F.); +#9466 = FACE_BOUND('',#9467,.T.); +#9467 = EDGE_LOOP('',(#9468,#9476,#9482,#9483)); +#9468 = ORIENTED_EDGE('',*,*,#9469,.T.); +#9469 = EDGE_CURVE('',#8996,#9470,#9472,.T.); +#9470 = VERTEX_POINT('',#9471); +#9471 = CARTESIAN_POINT('',(-4.599999165537,-8.,3.000001096723)); +#9472 = LINE('',#9473,#9474); +#9473 = CARTESIAN_POINT('',(-4.899999165537,-8.,3.000001168248)); +#9474 = VECTOR('',#9475,1.); +#9475 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9476 = ORIENTED_EDGE('',*,*,#9477,.T.); +#9477 = EDGE_CURVE('',#9470,#9446,#9478,.T.); +#9478 = LINE('',#9479,#9480); +#9479 = CARTESIAN_POINT('',(-4.599999165537,-8.,3.000001096723)); +#9480 = VECTOR('',#9481,1.); +#9481 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#9482 = ORIENTED_EDGE('',*,*,#9445,.F.); +#9483 = ORIENTED_EDGE('',*,*,#9003,.F.); +#9484 = PLANE('',#9485); +#9485 = AXIS2_PLACEMENT_3D('',#9486,#9487,#9488); +#9486 = CARTESIAN_POINT('',(-4.899999165537,-8.,3.000001168248)); +#9487 = DIRECTION('',(2.384180143219E-07,1.232595164408E-32,1.)); +#9488 = DIRECTION('',(-1.110223024625E-16,1.,2.646971688623E-23)); +#9489 = ADVANCED_FACE('',(#9490),#9508,.F.); +#9490 = FACE_BOUND('',#9491,.T.); +#9491 = EDGE_LOOP('',(#9492,#9500,#9506,#9507)); +#9492 = ORIENTED_EDGE('',*,*,#9493,.T.); +#9493 = EDGE_CURVE('',#8988,#9494,#9496,.T.); +#9494 = VERTEX_POINT('',#9495); +#9495 = CARTESIAN_POINT('',(-4.599999880791,-8.,1.096722851202E-06)); +#9496 = LINE('',#9497,#9498); +#9497 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#9498 = VECTOR('',#9499,1.); +#9499 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9500 = ORIENTED_EDGE('',*,*,#9501,.T.); +#9501 = EDGE_CURVE('',#9494,#9470,#9502,.T.); +#9502 = LINE('',#9503,#9504); +#9503 = CARTESIAN_POINT('',(-4.599999880791,-8.,1.096722851146E-06)); +#9504 = VECTOR('',#9505,1.); +#9505 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9506 = ORIENTED_EDGE('',*,*,#9469,.F.); +#9507 = ORIENTED_EDGE('',*,*,#8995,.F.); +#9508 = PLANE('',#9509); +#9509 = AXIS2_PLACEMENT_3D('',#9510,#9511,#9512); +#9510 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#9511 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#9512 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#9513 = ADVANCED_FACE('',(#9514),#9532,.T.); +#9514 = FACE_BOUND('',#9515,.F.); +#9515 = EDGE_LOOP('',(#9516,#9517,#9518,#9526)); +#9516 = ORIENTED_EDGE('',*,*,#8987,.F.); +#9517 = ORIENTED_EDGE('',*,*,#9493,.T.); +#9518 = ORIENTED_EDGE('',*,*,#9519,.T.); +#9519 = EDGE_CURVE('',#9494,#9520,#9522,.T.); +#9520 = VERTEX_POINT('',#9521); +#9521 = CARTESIAN_POINT('',(-4.600000476836,-8.,-2.499998903277)); +#9522 = LINE('',#9523,#9524); +#9523 = CARTESIAN_POINT('',(-4.599999880791,-8.,1.096722851146E-06)); +#9524 = VECTOR('',#9525,1.); +#9525 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#9526 = ORIENTED_EDGE('',*,*,#9527,.F.); +#9527 = EDGE_CURVE('',#8980,#9520,#9528,.T.); +#9528 = LINE('',#9529,#9530); +#9529 = CARTESIAN_POINT('',(-4.900000476836,-8.,-2.499998831752)); +#9530 = VECTOR('',#9531,1.); +#9531 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9532 = PLANE('',#9533); +#9533 = AXIS2_PLACEMENT_3D('',#9534,#9535,#9536); +#9534 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#9535 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#9536 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#9537 = ADVANCED_FACE('',(#9538),#9556,.T.); +#9538 = FACE_BOUND('',#9539,.T.); +#9539 = EDGE_LOOP('',(#9540,#9541,#9549,#9555)); +#9540 = ORIENTED_EDGE('',*,*,#8979,.F.); +#9541 = ORIENTED_EDGE('',*,*,#9542,.T.); +#9542 = EDGE_CURVE('',#8972,#9543,#9545,.T.); +#9543 = VERTEX_POINT('',#9544); +#9544 = CARTESIAN_POINT('',(-4.600000596045,-7.5,-2.999998903277)); +#9545 = LINE('',#9546,#9547); +#9546 = CARTESIAN_POINT('',(-4.900000596045,-7.5,-2.999998831752)); +#9547 = VECTOR('',#9548,1.); +#9548 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#9549 = ORIENTED_EDGE('',*,*,#9550,.T.); +#9550 = EDGE_CURVE('',#9543,#9520,#9551,.T.); +#9551 = LINE('',#9552,#9553); +#9552 = CARTESIAN_POINT('',(-4.60000053644,-7.75,-2.749998903277)); +#9553 = VECTOR('',#9554,1.); +#9554 = DIRECTION('',(1.68586994684E-07,-0.707106781187,0.707106781187) + ); +#9555 = ORIENTED_EDGE('',*,*,#9527,.F.); +#9556 = PLANE('',#9557); +#9557 = AXIS2_PLACEMENT_3D('',#9558,#9559,#9560); +#9558 = CARTESIAN_POINT('',(-4.90000053644,-7.75,-2.749998831752)); +#9559 = DIRECTION('',(-1.685869946959E-07,-0.707106781187, + -0.707106781187)); +#9560 = DIRECTION('',(1.,-8.342414262618E-18,-2.384180143303E-07)); +#9561 = ADVANCED_FACE('',(#9562),#9573,.T.); +#9562 = FACE_BOUND('',#9563,.F.); +#9563 = EDGE_LOOP('',(#9564,#9565,#9566,#9572)); +#9564 = ORIENTED_EDGE('',*,*,#8971,.F.); +#9565 = ORIENTED_EDGE('',*,*,#9542,.T.); +#9566 = ORIENTED_EDGE('',*,*,#9567,.T.); +#9567 = EDGE_CURVE('',#9543,#9279,#9568,.T.); +#9568 = LINE('',#9569,#9570); +#9569 = CARTESIAN_POINT('',(-4.600000596045,-8.,-2.999998903277)); +#9570 = VECTOR('',#9571,1.); +#9571 = DIRECTION('',(3.488244315274E-30,1.,2.646971654213E-23)); +#9572 = ORIENTED_EDGE('',*,*,#9278,.F.); +#9573 = PLANE('',#9574); +#9574 = AXIS2_PLACEMENT_3D('',#9575,#9576,#9577); +#9575 = CARTESIAN_POINT('',(-4.900000596045,-8.,-2.999998831752)); +#9576 = DIRECTION('',(-2.384180143219E-07,-1.232595164408E-32,-1.)); +#9577 = DIRECTION('',(1.110223024625E-16,-1.,-2.646971688623E-23)); +#9578 = ADVANCED_FACE('',(#9579),#9590,.F.); +#9579 = FACE_BOUND('',#9580,.T.); +#9580 = EDGE_LOOP('',(#9581,#9582,#9588,#9589)); +#9581 = ORIENTED_EDGE('',*,*,#9129,.T.); +#9582 = ORIENTED_EDGE('',*,*,#9583,.T.); +#9583 = EDGE_CURVE('',#9122,#9255,#9584,.T.); +#9584 = LINE('',#9585,#9586); +#9585 = CARTESIAN_POINT('',(-4.599997758871,-10.8,8.900001096723)); +#9586 = VECTOR('',#9587,1.); +#9587 = DIRECTION('',(3.488244315274E-30,1.,2.646971654213E-23)); +#9588 = ORIENTED_EDGE('',*,*,#9254,.F.); +#9589 = ORIENTED_EDGE('',*,*,#9105,.F.); +#9590 = PLANE('',#9591); +#9591 = AXIS2_PLACEMENT_3D('',#9592,#9593,#9594); +#9592 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.900001168248)); +#9593 = DIRECTION('',(-2.384180143219E-07,-1.232595164408E-32,-1.)); +#9594 = DIRECTION('',(1.110223024625E-16,-1.,-2.646971688623E-23)); +#9595 = ADVANCED_FACE('',(#9596),#9607,.T.); +#9596 = FACE_BOUND('',#9597,.F.); +#9597 = EDGE_LOOP('',(#9598,#9599,#9605,#9606)); +#9598 = ORIENTED_EDGE('',*,*,#9262,.T.); +#9599 = ORIENTED_EDGE('',*,*,#9600,.F.); +#9600 = EDGE_CURVE('',#8909,#8932,#9601,.T.); +#9601 = LINE('',#9602,#9603); +#9602 = CARTESIAN_POINT('',(-4.599997758871,-5.1,8.9)); +#9603 = VECTOR('',#9604,1.); +#9604 = DIRECTION('',(2.646971722006E-23,1.,0.)); +#9605 = ORIENTED_EDGE('',*,*,#9121,.T.); +#9606 = ORIENTED_EDGE('',*,*,#9583,.T.); +#9607 = PLANE('',#9608); +#9608 = AXIS2_PLACEMENT_3D('',#9609,#9610,#9611); +#9609 = CARTESIAN_POINT('',(-4.600000596045,-8.,-2.999998903277)); +#9610 = DIRECTION('',(1.,-2.646971722006E-23,-2.384180143219E-07)); +#9611 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9612 = ADVANCED_FACE('',(#9613),#9629,.F.); +#9613 = FACE_BOUND('',#9614,.F.); +#9614 = EDGE_LOOP('',(#9615,#9616,#9622,#9623)); +#9615 = ORIENTED_EDGE('',*,*,#9222,.F.); +#9616 = ORIENTED_EDGE('',*,*,#9617,.F.); +#9617 = EDGE_CURVE('',#8901,#8940,#9618,.T.); +#9618 = LINE('',#9619,#9620); +#9619 = CARTESIAN_POINT('',(-4.599997830396,-5.1,8.6)); +#9620 = VECTOR('',#9621,1.); +#9621 = DIRECTION('',(2.646971722006E-23,1.,0.)); +#9622 = ORIENTED_EDGE('',*,*,#9143,.F.); +#9623 = ORIENTED_EDGE('',*,*,#9624,.T.); +#9624 = EDGE_CURVE('',#9144,#9223,#9625,.T.); +#9625 = LINE('',#9626,#9627); +#9626 = CARTESIAN_POINT('',(4.6,-5.1,8.6)); +#9627 = VECTOR('',#9628,1.); +#9628 = DIRECTION('',(0.,1.,0.)); +#9629 = PLANE('',#9630); +#9630 = AXIS2_PLACEMENT_3D('',#9631,#9632,#9633); +#9631 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#9632 = DIRECTION('',(0.,0.,1.)); +#9633 = DIRECTION('',(1.,0.,-0.)); +#9634 = ADVANCED_FACE('',(#9635),#9646,.T.); +#9635 = FACE_BOUND('',#9636,.T.); +#9636 = EDGE_LOOP('',(#9637,#9643,#9644,#9645)); +#9637 = ORIENTED_EDGE('',*,*,#9638,.T.); +#9638 = EDGE_CURVE('',#9152,#9232,#9639,.T.); +#9639 = LINE('',#9640,#9641); +#9640 = CARTESIAN_POINT('',(4.6,-10.8,8.9)); +#9641 = VECTOR('',#9642,1.); +#9642 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#9643 = ORIENTED_EDGE('',*,*,#9231,.F.); +#9644 = ORIENTED_EDGE('',*,*,#9600,.F.); +#9645 = ORIENTED_EDGE('',*,*,#9159,.F.); +#9646 = PLANE('',#9647); +#9647 = AXIS2_PLACEMENT_3D('',#9648,#9649,#9650); +#9648 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#9649 = DIRECTION('',(0.,0.,1.)); +#9650 = DIRECTION('',(1.,0.,-0.)); +#9651 = ADVANCED_FACE('',(#9652),#9677,.F.); +#9652 = FACE_BOUND('',#9653,.F.); +#9653 = EDGE_LOOP('',(#9654,#9664,#9670,#9671)); +#9654 = ORIENTED_EDGE('',*,*,#9655,.F.); +#9655 = EDGE_CURVE('',#9656,#9658,#9660,.T.); +#9656 = VERTEX_POINT('',#9657); +#9657 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#9658 = VERTEX_POINT('',#9659); +#9659 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#9660 = LINE('',#9661,#9662); +#9661 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#9662 = VECTOR('',#9663,1.); +#9663 = DIRECTION('',(0.,0.,1.)); +#9664 = ORIENTED_EDGE('',*,*,#9665,.T.); +#9665 = EDGE_CURVE('',#9656,#9144,#9666,.T.); +#9666 = LINE('',#9667,#9668); +#9667 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#9668 = VECTOR('',#9669,1.); +#9669 = DIRECTION('',(-1.,0.,0.)); +#9670 = ORIENTED_EDGE('',*,*,#9151,.T.); +#9671 = ORIENTED_EDGE('',*,*,#9672,.F.); +#9672 = EDGE_CURVE('',#9658,#9152,#9673,.T.); +#9673 = LINE('',#9674,#9675); +#9674 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#9675 = VECTOR('',#9676,1.); +#9676 = DIRECTION('',(-1.,0.,0.)); +#9677 = PLANE('',#9678); +#9678 = AXIS2_PLACEMENT_3D('',#9679,#9680,#9681); +#9679 = CARTESIAN_POINT('',(4.9,-10.8,0.)); +#9680 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#9681 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#9682 = ADVANCED_FACE('',(#9683),#9701,.T.); +#9683 = FACE_BOUND('',#9684,.F.); +#9684 = EDGE_LOOP('',(#9685,#9686,#9687,#9688,#9689,#9690,#9691,#9692, + #9693,#9694,#9695,#9696,#9697,#9698,#9699,#9700)); +#9685 = ORIENTED_EDGE('',*,*,#9286,.F.); +#9686 = ORIENTED_EDGE('',*,*,#9567,.F.); +#9687 = ORIENTED_EDGE('',*,*,#9550,.T.); +#9688 = ORIENTED_EDGE('',*,*,#9519,.F.); +#9689 = ORIENTED_EDGE('',*,*,#9501,.T.); +#9690 = ORIENTED_EDGE('',*,*,#9477,.T.); +#9691 = ORIENTED_EDGE('',*,*,#9453,.T.); +#9692 = ORIENTED_EDGE('',*,*,#9429,.T.); +#9693 = ORIENTED_EDGE('',*,*,#9183,.T.); +#9694 = ORIENTED_EDGE('',*,*,#9617,.T.); +#9695 = ORIENTED_EDGE('',*,*,#9200,.T.); +#9696 = ORIENTED_EDGE('',*,*,#9405,.T.); +#9697 = ORIENTED_EDGE('',*,*,#9388,.T.); +#9698 = ORIENTED_EDGE('',*,*,#9364,.T.); +#9699 = ORIENTED_EDGE('',*,*,#9340,.T.); +#9700 = ORIENTED_EDGE('',*,*,#9310,.F.); +#9701 = PLANE('',#9702); +#9702 = AXIS2_PLACEMENT_3D('',#9703,#9704,#9705); +#9703 = CARTESIAN_POINT('',(-4.600000596045,-8.,-2.999998903277)); +#9704 = DIRECTION('',(1.,-2.646971722006E-23,-2.384180143219E-07)); +#9705 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#9706 = ADVANCED_FACE('',(#9707),#9732,.F.); +#9707 = FACE_BOUND('',#9708,.F.); +#9708 = EDGE_LOOP('',(#9709,#9719,#9725,#9726)); +#9709 = ORIENTED_EDGE('',*,*,#9710,.T.); +#9710 = EDGE_CURVE('',#9711,#9713,#9715,.T.); +#9711 = VERTEX_POINT('',#9712); +#9712 = CARTESIAN_POINT('',(4.9,-2.2,8.6)); +#9713 = VERTEX_POINT('',#9714); +#9714 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#9715 = LINE('',#9716,#9717); +#9716 = CARTESIAN_POINT('',(4.9,-2.2,8.6)); +#9717 = VECTOR('',#9718,1.); +#9718 = DIRECTION('',(0.,0.,1.)); +#9719 = ORIENTED_EDGE('',*,*,#9720,.T.); +#9720 = EDGE_CURVE('',#9713,#9232,#9721,.T.); +#9721 = LINE('',#9722,#9723); +#9722 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#9723 = VECTOR('',#9724,1.); +#9724 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#9725 = ORIENTED_EDGE('',*,*,#9239,.T.); +#9726 = ORIENTED_EDGE('',*,*,#9727,.T.); +#9727 = EDGE_CURVE('',#9223,#9711,#9728,.T.); +#9728 = LINE('',#9729,#9730); +#9729 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#9730 = VECTOR('',#9731,1.); +#9731 = DIRECTION('',(1.,0.,0.)); +#9732 = PLANE('',#9733); +#9733 = AXIS2_PLACEMENT_3D('',#9734,#9735,#9736); +#9734 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#9735 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#9736 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#9737 = ADVANCED_FACE('',(#9738),#9859,.T.); +#9738 = FACE_BOUND('',#9739,.T.); +#9739 = EDGE_LOOP('',(#9740,#9750,#9758,#9766,#9774,#9782,#9790,#9798, + #9806,#9812,#9813,#9821,#9829,#9837,#9845,#9853)); +#9740 = ORIENTED_EDGE('',*,*,#9741,.F.); +#9741 = EDGE_CURVE('',#9742,#9744,#9746,.T.); +#9742 = VERTEX_POINT('',#9743); +#9743 = CARTESIAN_POINT('',(4.6,-6.5,-3.)); +#9744 = VERTEX_POINT('',#9745); +#9745 = CARTESIAN_POINT('',(4.6,-6.,-2.5)); +#9746 = LINE('',#9747,#9748); +#9747 = CARTESIAN_POINT('',(4.6,-6.75,-3.25)); +#9748 = VECTOR('',#9749,1.); +#9749 = DIRECTION('',(-7.850462293414E-17,0.707106781187,0.707106781187) + ); +#9750 = ORIENTED_EDGE('',*,*,#9751,.F.); +#9751 = EDGE_CURVE('',#9752,#9742,#9754,.T.); +#9752 = VERTEX_POINT('',#9753); +#9753 = CARTESIAN_POINT('',(4.6,-7.5,-3.)); +#9754 = LINE('',#9755,#9756); +#9755 = CARTESIAN_POINT('',(4.6,-8.,-3.)); +#9756 = VECTOR('',#9757,1.); +#9757 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#9758 = ORIENTED_EDGE('',*,*,#9759,.T.); +#9759 = EDGE_CURVE('',#9752,#9760,#9762,.T.); +#9760 = VERTEX_POINT('',#9761); +#9761 = CARTESIAN_POINT('',(4.6,-8.,-2.5)); +#9762 = LINE('',#9763,#9764); +#9763 = CARTESIAN_POINT('',(4.6,-7.75,-2.75)); +#9764 = VECTOR('',#9765,1.); +#9765 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#9766 = ORIENTED_EDGE('',*,*,#9767,.F.); +#9767 = EDGE_CURVE('',#9768,#9760,#9770,.T.); +#9768 = VERTEX_POINT('',#9769); +#9769 = CARTESIAN_POINT('',(4.6,-8.,-3.330669073875E-17)); +#9770 = LINE('',#9771,#9772); +#9771 = CARTESIAN_POINT('',(4.6,-8.,8.548717289614E-16)); +#9772 = VECTOR('',#9773,1.); +#9773 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#9774 = ORIENTED_EDGE('',*,*,#9775,.T.); +#9775 = EDGE_CURVE('',#9768,#9776,#9778,.T.); +#9776 = VERTEX_POINT('',#9777); +#9777 = CARTESIAN_POINT('',(4.6,-8.,3.)); +#9778 = LINE('',#9779,#9780); +#9779 = CARTESIAN_POINT('',(4.6,-8.,8.548717289614E-16)); +#9780 = VECTOR('',#9781,1.); +#9781 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#9782 = ORIENTED_EDGE('',*,*,#9783,.T.); +#9783 = EDGE_CURVE('',#9776,#9784,#9786,.T.); +#9784 = VERTEX_POINT('',#9785); +#9785 = CARTESIAN_POINT('',(4.6,-8.3,3.)); +#9786 = LINE('',#9787,#9788); +#9787 = CARTESIAN_POINT('',(4.6,-8.,3.)); +#9788 = VECTOR('',#9789,1.); +#9789 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#9790 = ORIENTED_EDGE('',*,*,#9791,.T.); +#9791 = EDGE_CURVE('',#9784,#9792,#9794,.T.); +#9792 = VERTEX_POINT('',#9793); +#9793 = CARTESIAN_POINT('',(4.6,-8.3,-3.330669073875E-17)); +#9794 = LINE('',#9795,#9796); +#9795 = CARTESIAN_POINT('',(4.6,-8.3,3.)); +#9796 = VECTOR('',#9797,1.); +#9797 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#9798 = ORIENTED_EDGE('',*,*,#9799,.T.); +#9799 = EDGE_CURVE('',#9792,#9800,#9802,.T.); +#9800 = VERTEX_POINT('',#9801); +#9801 = CARTESIAN_POINT('',(4.6,-10.8,-3.330669073875E-17)); +#9802 = LINE('',#9803,#9804); +#9803 = CARTESIAN_POINT('',(4.6,-8.3,8.881784197001E-16)); +#9804 = VECTOR('',#9805,1.); +#9805 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#9806 = ORIENTED_EDGE('',*,*,#9807,.T.); +#9807 = EDGE_CURVE('',#9800,#9144,#9808,.T.); +#9808 = LINE('',#9809,#9810); +#9809 = CARTESIAN_POINT('',(4.6,-10.8,1.165734175856E-15)); +#9810 = VECTOR('',#9811,1.); +#9811 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#9812 = ORIENTED_EDGE('',*,*,#9624,.T.); +#9813 = ORIENTED_EDGE('',*,*,#9814,.T.); +#9814 = EDGE_CURVE('',#9223,#9815,#9817,.T.); +#9815 = VERTEX_POINT('',#9816); +#9816 = CARTESIAN_POINT('',(4.6,-2.2,-3.330669073875E-17)); +#9817 = LINE('',#9818,#9819); +#9818 = CARTESIAN_POINT('',(4.6,-2.2,8.9)); +#9819 = VECTOR('',#9820,1.); +#9820 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#9821 = ORIENTED_EDGE('',*,*,#9822,.T.); +#9822 = EDGE_CURVE('',#9815,#9823,#9825,.T.); +#9823 = VERTEX_POINT('',#9824); +#9824 = CARTESIAN_POINT('',(4.6,-5.7,-3.330669073875E-17)); +#9825 = LINE('',#9826,#9827); +#9826 = CARTESIAN_POINT('',(4.6,-2.2,2.109423746788E-16)); +#9827 = VECTOR('',#9828,1.); +#9828 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#9829 = ORIENTED_EDGE('',*,*,#9830,.T.); +#9830 = EDGE_CURVE('',#9823,#9831,#9833,.T.); +#9831 = VERTEX_POINT('',#9832); +#9832 = CARTESIAN_POINT('',(4.6,-5.7,3.)); +#9833 = LINE('',#9834,#9835); +#9834 = CARTESIAN_POINT('',(4.6,-5.7,5.995204332976E-16)); +#9835 = VECTOR('',#9836,1.); +#9836 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#9837 = ORIENTED_EDGE('',*,*,#9838,.T.); +#9838 = EDGE_CURVE('',#9831,#9839,#9841,.T.); +#9839 = VERTEX_POINT('',#9840); +#9840 = CARTESIAN_POINT('',(4.6,-6.,3.)); +#9841 = LINE('',#9842,#9843); +#9842 = CARTESIAN_POINT('',(4.6,-5.7,3.)); +#9843 = VECTOR('',#9844,1.); +#9844 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#9845 = ORIENTED_EDGE('',*,*,#9846,.T.); +#9846 = EDGE_CURVE('',#9839,#9847,#9849,.T.); +#9847 = VERTEX_POINT('',#9848); +#9848 = CARTESIAN_POINT('',(4.6,-6.,-3.330669073875E-17)); +#9849 = LINE('',#9850,#9851); +#9850 = CARTESIAN_POINT('',(4.6,-6.,3.)); +#9851 = VECTOR('',#9852,1.); +#9852 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#9853 = ORIENTED_EDGE('',*,*,#9854,.F.); +#9854 = EDGE_CURVE('',#9744,#9847,#9855,.T.); +#9855 = LINE('',#9856,#9857); +#9856 = CARTESIAN_POINT('',(4.6,-6.,-3.)); +#9857 = VECTOR('',#9858,1.); +#9858 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#9859 = PLANE('',#9860); +#9860 = AXIS2_PLACEMENT_3D('',#9861,#9862,#9863); +#9861 = CARTESIAN_POINT('',(4.6,-8.,-3.)); +#9862 = DIRECTION('',(-1.,0.,-1.110223024625E-16)); +#9863 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#9864 = ADVANCED_FACE('',(#9865),#9876,.F.); +#9865 = FACE_BOUND('',#9866,.F.); +#9866 = EDGE_LOOP('',(#9867,#9868,#9869,#9870)); +#9867 = ORIENTED_EDGE('',*,*,#9672,.T.); +#9868 = ORIENTED_EDGE('',*,*,#9638,.T.); +#9869 = ORIENTED_EDGE('',*,*,#9720,.F.); +#9870 = ORIENTED_EDGE('',*,*,#9871,.T.); +#9871 = EDGE_CURVE('',#9713,#9658,#9872,.T.); +#9872 = LINE('',#9873,#9874); +#9873 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#9874 = VECTOR('',#9875,1.); +#9875 = DIRECTION('',(0.,-1.,0.)); +#9876 = PLANE('',#9877); +#9877 = AXIS2_PLACEMENT_3D('',#9878,#9879,#9880); +#9878 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#9879 = DIRECTION('',(1.110223024625E-16,-1.232595164408E-32,-1.)); +#9880 = DIRECTION('',(1.110223024625E-16,1.,-5.167288087198E-45)); +#9881 = ADVANCED_FACE('',(#9882),#9893,.T.); +#9882 = FACE_BOUND('',#9883,.T.); +#9883 = EDGE_LOOP('',(#9884,#9885,#9886,#9887)); +#9884 = ORIENTED_EDGE('',*,*,#9710,.T.); +#9885 = ORIENTED_EDGE('',*,*,#9871,.T.); +#9886 = ORIENTED_EDGE('',*,*,#9655,.F.); +#9887 = ORIENTED_EDGE('',*,*,#9888,.F.); +#9888 = EDGE_CURVE('',#9711,#9656,#9889,.T.); +#9889 = LINE('',#9890,#9891); +#9890 = CARTESIAN_POINT('',(4.9,-2.2,8.6)); +#9891 = VECTOR('',#9892,1.); +#9892 = DIRECTION('',(0.,-1.,0.)); +#9893 = PLANE('',#9894); +#9894 = AXIS2_PLACEMENT_3D('',#9895,#9896,#9897); +#9895 = CARTESIAN_POINT('',(4.9,-2.2,8.6)); +#9896 = DIRECTION('',(1.,0.,0.)); +#9897 = DIRECTION('',(0.,-1.,0.)); +#9898 = ADVANCED_FACE('',(#9899),#9917,.F.); +#9899 = FACE_BOUND('',#9900,.F.); +#9900 = EDGE_LOOP('',(#9901,#9909,#9915,#9916)); +#9901 = ORIENTED_EDGE('',*,*,#9902,.F.); +#9902 = EDGE_CURVE('',#9903,#9656,#9905,.T.); +#9903 = VERTEX_POINT('',#9904); +#9904 = CARTESIAN_POINT('',(4.9,-10.8,0.)); +#9905 = LINE('',#9906,#9907); +#9906 = CARTESIAN_POINT('',(4.9,-10.8,1.199040866595E-15)); +#9907 = VECTOR('',#9908,1.); +#9908 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#9909 = ORIENTED_EDGE('',*,*,#9910,.T.); +#9910 = EDGE_CURVE('',#9903,#9800,#9911,.T.); +#9911 = LINE('',#9912,#9913); +#9912 = CARTESIAN_POINT('',(4.9,-10.8,0.)); +#9913 = VECTOR('',#9914,1.); +#9914 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#9915 = ORIENTED_EDGE('',*,*,#9807,.T.); +#9916 = ORIENTED_EDGE('',*,*,#9665,.F.); +#9917 = PLANE('',#9918); +#9918 = AXIS2_PLACEMENT_3D('',#9919,#9920,#9921); +#9919 = CARTESIAN_POINT('',(4.9,-10.8,0.)); +#9920 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#9921 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#9922 = ADVANCED_FACE('',(#9923),#9941,.F.); +#9923 = FACE_BOUND('',#9924,.F.); +#9924 = EDGE_LOOP('',(#9925,#9933,#9934,#9935)); +#9925 = ORIENTED_EDGE('',*,*,#9926,.F.); +#9926 = EDGE_CURVE('',#9711,#9927,#9929,.T.); +#9927 = VERTEX_POINT('',#9928); +#9928 = CARTESIAN_POINT('',(4.9,-2.2,0.)); +#9929 = LINE('',#9930,#9931); +#9930 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#9931 = VECTOR('',#9932,1.); +#9932 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#9933 = ORIENTED_EDGE('',*,*,#9727,.F.); +#9934 = ORIENTED_EDGE('',*,*,#9814,.T.); +#9935 = ORIENTED_EDGE('',*,*,#9936,.F.); +#9936 = EDGE_CURVE('',#9927,#9815,#9937,.T.); +#9937 = LINE('',#9938,#9939); +#9938 = CARTESIAN_POINT('',(4.9,-2.2,0.)); +#9939 = VECTOR('',#9940,1.); +#9940 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#9941 = PLANE('',#9942); +#9942 = AXIS2_PLACEMENT_3D('',#9943,#9944,#9945); +#9943 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#9944 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#9945 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#9946 = ADVANCED_FACE('',(#9947),#9972,.T.); +#9947 = FACE_BOUND('',#9948,.T.); +#9948 = EDGE_LOOP('',(#9949,#9959,#9965,#9966)); +#9949 = ORIENTED_EDGE('',*,*,#9950,.F.); +#9950 = EDGE_CURVE('',#9951,#9953,#9955,.T.); +#9951 = VERTEX_POINT('',#9952); +#9952 = CARTESIAN_POINT('',(4.9,-6.5,-3.)); +#9953 = VERTEX_POINT('',#9954); +#9954 = CARTESIAN_POINT('',(4.9,-6.,-2.5)); +#9955 = LINE('',#9956,#9957); +#9956 = CARTESIAN_POINT('',(4.9,-6.75,-3.25)); +#9957 = VECTOR('',#9958,1.); +#9958 = DIRECTION('',(-7.850462293414E-17,0.707106781187,0.707106781187) + ); +#9959 = ORIENTED_EDGE('',*,*,#9960,.T.); +#9960 = EDGE_CURVE('',#9951,#9742,#9961,.T.); +#9961 = LINE('',#9962,#9963); +#9962 = CARTESIAN_POINT('',(4.9,-6.5,-3.)); +#9963 = VECTOR('',#9964,1.); +#9964 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#9965 = ORIENTED_EDGE('',*,*,#9741,.T.); +#9966 = ORIENTED_EDGE('',*,*,#9967,.F.); +#9967 = EDGE_CURVE('',#9953,#9744,#9968,.T.); +#9968 = LINE('',#9969,#9970); +#9969 = CARTESIAN_POINT('',(4.9,-6.,-2.5)); +#9970 = VECTOR('',#9971,1.); +#9971 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#9972 = PLANE('',#9973); +#9973 = AXIS2_PLACEMENT_3D('',#9974,#9975,#9976); +#9974 = CARTESIAN_POINT('',(4.9,-6.25,-2.75)); +#9975 = DIRECTION('',(9.738707312125E-17,0.707106781187,-0.707106781187) + ); +#9976 = DIRECTION('',(-1.,1.335190857271E-17,-1.243742110352E-16)); +#9977 = ADVANCED_FACE('',(#9978),#9996,.T.); +#9978 = FACE_BOUND('',#9979,.T.); +#9979 = EDGE_LOOP('',(#9980,#9988,#9989,#9990)); +#9980 = ORIENTED_EDGE('',*,*,#9981,.F.); +#9981 = EDGE_CURVE('',#9953,#9982,#9984,.T.); +#9982 = VERTEX_POINT('',#9983); +#9983 = CARTESIAN_POINT('',(4.9,-6.,0.)); +#9984 = LINE('',#9985,#9986); +#9985 = CARTESIAN_POINT('',(4.9,-6.,-3.)); +#9986 = VECTOR('',#9987,1.); +#9987 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#9988 = ORIENTED_EDGE('',*,*,#9967,.T.); +#9989 = ORIENTED_EDGE('',*,*,#9854,.T.); +#9990 = ORIENTED_EDGE('',*,*,#9991,.F.); +#9991 = EDGE_CURVE('',#9982,#9847,#9992,.T.); +#9992 = LINE('',#9993,#9994); +#9993 = CARTESIAN_POINT('',(4.9,-6.,0.)); +#9994 = VECTOR('',#9995,1.); +#9995 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#9996 = PLANE('',#9997); +#9997 = AXIS2_PLACEMENT_3D('',#9998,#9999,#10000); +#9998 = CARTESIAN_POINT('',(4.9,-6.,-3.)); +#9999 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#10000 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#10001 = ADVANCED_FACE('',(#10002),#10020,.F.); +#10002 = FACE_BOUND('',#10003,.F.); +#10003 = EDGE_LOOP('',(#10004,#10012,#10013,#10014)); +#10004 = ORIENTED_EDGE('',*,*,#10005,.T.); +#10005 = EDGE_CURVE('',#10006,#9839,#10008,.T.); +#10006 = VERTEX_POINT('',#10007); +#10007 = CARTESIAN_POINT('',(4.9,-6.,3.)); +#10008 = LINE('',#10009,#10010); +#10009 = CARTESIAN_POINT('',(4.9,-6.,3.)); +#10010 = VECTOR('',#10011,1.); +#10011 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10012 = ORIENTED_EDGE('',*,*,#9846,.T.); +#10013 = ORIENTED_EDGE('',*,*,#9991,.F.); +#10014 = ORIENTED_EDGE('',*,*,#10015,.F.); +#10015 = EDGE_CURVE('',#10006,#9982,#10016,.T.); +#10016 = LINE('',#10017,#10018); +#10017 = CARTESIAN_POINT('',(4.9,-6.,3.)); +#10018 = VECTOR('',#10019,1.); +#10019 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#10020 = PLANE('',#10021); +#10021 = AXIS2_PLACEMENT_3D('',#10022,#10023,#10024); +#10022 = CARTESIAN_POINT('',(4.9,-6.,3.)); +#10023 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#10024 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#10025 = ADVANCED_FACE('',(#10026),#10044,.F.); +#10026 = FACE_BOUND('',#10027,.F.); +#10027 = EDGE_LOOP('',(#10028,#10036,#10037,#10038)); +#10028 = ORIENTED_EDGE('',*,*,#10029,.T.); +#10029 = EDGE_CURVE('',#10030,#9831,#10032,.T.); +#10030 = VERTEX_POINT('',#10031); +#10031 = CARTESIAN_POINT('',(4.9,-5.7,3.)); +#10032 = LINE('',#10033,#10034); +#10033 = CARTESIAN_POINT('',(4.9,-5.7,3.)); +#10034 = VECTOR('',#10035,1.); +#10035 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10036 = ORIENTED_EDGE('',*,*,#9838,.T.); +#10037 = ORIENTED_EDGE('',*,*,#10005,.F.); +#10038 = ORIENTED_EDGE('',*,*,#10039,.F.); +#10039 = EDGE_CURVE('',#10030,#10006,#10040,.T.); +#10040 = LINE('',#10041,#10042); +#10041 = CARTESIAN_POINT('',(4.9,-5.7,3.)); +#10042 = VECTOR('',#10043,1.); +#10043 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#10044 = PLANE('',#10045); +#10045 = AXIS2_PLACEMENT_3D('',#10046,#10047,#10048); +#10046 = CARTESIAN_POINT('',(4.9,-5.7,3.)); +#10047 = DIRECTION('',(-1.110223024625E-16,1.232595164408E-32,1.)); +#10048 = DIRECTION('',(-1.110223024625E-16,-1.,5.167288087198E-45)); +#10049 = ADVANCED_FACE('',(#10050),#10068,.F.); +#10050 = FACE_BOUND('',#10051,.F.); +#10051 = EDGE_LOOP('',(#10052,#10060,#10061,#10062)); +#10052 = ORIENTED_EDGE('',*,*,#10053,.T.); +#10053 = EDGE_CURVE('',#10054,#9823,#10056,.T.); +#10054 = VERTEX_POINT('',#10055); +#10055 = CARTESIAN_POINT('',(4.9,-5.7,0.)); +#10056 = LINE('',#10057,#10058); +#10057 = CARTESIAN_POINT('',(4.9,-5.7,0.)); +#10058 = VECTOR('',#10059,1.); +#10059 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10060 = ORIENTED_EDGE('',*,*,#9830,.T.); +#10061 = ORIENTED_EDGE('',*,*,#10029,.F.); +#10062 = ORIENTED_EDGE('',*,*,#10063,.F.); +#10063 = EDGE_CURVE('',#10054,#10030,#10064,.T.); +#10064 = LINE('',#10065,#10066); +#10065 = CARTESIAN_POINT('',(4.9,-5.7,6.328271240363E-16)); +#10066 = VECTOR('',#10067,1.); +#10067 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#10068 = PLANE('',#10069); +#10069 = AXIS2_PLACEMENT_3D('',#10070,#10071,#10072); +#10070 = CARTESIAN_POINT('',(4.9,-5.7,0.)); +#10071 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#10072 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#10073 = ADVANCED_FACE('',(#10074),#10085,.F.); +#10074 = FACE_BOUND('',#10075,.F.); +#10075 = EDGE_LOOP('',(#10076,#10077,#10078,#10079)); +#10076 = ORIENTED_EDGE('',*,*,#9936,.T.); +#10077 = ORIENTED_EDGE('',*,*,#9822,.T.); +#10078 = ORIENTED_EDGE('',*,*,#10053,.F.); +#10079 = ORIENTED_EDGE('',*,*,#10080,.F.); +#10080 = EDGE_CURVE('',#9927,#10054,#10081,.T.); +#10081 = LINE('',#10082,#10083); +#10082 = CARTESIAN_POINT('',(4.9,-2.2,2.442490654175E-16)); +#10083 = VECTOR('',#10084,1.); +#10084 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#10085 = PLANE('',#10086); +#10086 = AXIS2_PLACEMENT_3D('',#10087,#10088,#10089); +#10087 = CARTESIAN_POINT('',(4.9,-2.2,0.)); +#10088 = DIRECTION('',(-1.110223024625E-16,1.232595164408E-32,1.)); +#10089 = DIRECTION('',(-1.110223024625E-16,-1.,5.167288087198E-45)); +#10090 = ADVANCED_FACE('',(#10091),#10109,.F.); +#10091 = FACE_BOUND('',#10092,.F.); +#10092 = EDGE_LOOP('',(#10093,#10101,#10102,#10103)); +#10093 = ORIENTED_EDGE('',*,*,#10094,.T.); +#10094 = EDGE_CURVE('',#10095,#9792,#10097,.T.); +#10095 = VERTEX_POINT('',#10096); +#10096 = CARTESIAN_POINT('',(4.9,-8.3,0.)); +#10097 = LINE('',#10098,#10099); +#10098 = CARTESIAN_POINT('',(4.9,-8.3,0.)); +#10099 = VECTOR('',#10100,1.); +#10100 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10101 = ORIENTED_EDGE('',*,*,#9799,.T.); +#10102 = ORIENTED_EDGE('',*,*,#9910,.F.); +#10103 = ORIENTED_EDGE('',*,*,#10104,.F.); +#10104 = EDGE_CURVE('',#10095,#9903,#10105,.T.); +#10105 = LINE('',#10106,#10107); +#10106 = CARTESIAN_POINT('',(4.9,-8.3,9.214851104389E-16)); +#10107 = VECTOR('',#10108,1.); +#10108 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#10109 = PLANE('',#10110); +#10110 = AXIS2_PLACEMENT_3D('',#10111,#10112,#10113); +#10111 = CARTESIAN_POINT('',(4.9,-8.3,0.)); +#10112 = DIRECTION('',(-1.110223024625E-16,1.232595164408E-32,1.)); +#10113 = DIRECTION('',(-1.110223024625E-16,-1.,5.167288087198E-45)); +#10114 = ADVANCED_FACE('',(#10115),#10133,.F.); +#10115 = FACE_BOUND('',#10116,.F.); +#10116 = EDGE_LOOP('',(#10117,#10125,#10126,#10127)); +#10117 = ORIENTED_EDGE('',*,*,#10118,.T.); +#10118 = EDGE_CURVE('',#10119,#9784,#10121,.T.); +#10119 = VERTEX_POINT('',#10120); +#10120 = CARTESIAN_POINT('',(4.9,-8.3,3.)); +#10121 = LINE('',#10122,#10123); +#10122 = CARTESIAN_POINT('',(4.9,-8.3,3.)); +#10123 = VECTOR('',#10124,1.); +#10124 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10125 = ORIENTED_EDGE('',*,*,#9791,.T.); +#10126 = ORIENTED_EDGE('',*,*,#10094,.F.); +#10127 = ORIENTED_EDGE('',*,*,#10128,.F.); +#10128 = EDGE_CURVE('',#10119,#10095,#10129,.T.); +#10129 = LINE('',#10130,#10131); +#10130 = CARTESIAN_POINT('',(4.9,-8.3,3.)); +#10131 = VECTOR('',#10132,1.); +#10132 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#10133 = PLANE('',#10134); +#10134 = AXIS2_PLACEMENT_3D('',#10135,#10136,#10137); +#10135 = CARTESIAN_POINT('',(4.9,-8.3,3.)); +#10136 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#10137 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#10138 = ADVANCED_FACE('',(#10139),#10157,.F.); +#10139 = FACE_BOUND('',#10140,.F.); +#10140 = EDGE_LOOP('',(#10141,#10149,#10150,#10151)); +#10141 = ORIENTED_EDGE('',*,*,#10142,.T.); +#10142 = EDGE_CURVE('',#10143,#9776,#10145,.T.); +#10143 = VERTEX_POINT('',#10144); +#10144 = CARTESIAN_POINT('',(4.9,-8.,3.)); +#10145 = LINE('',#10146,#10147); +#10146 = CARTESIAN_POINT('',(4.9,-8.,3.)); +#10147 = VECTOR('',#10148,1.); +#10148 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10149 = ORIENTED_EDGE('',*,*,#9783,.T.); +#10150 = ORIENTED_EDGE('',*,*,#10118,.F.); +#10151 = ORIENTED_EDGE('',*,*,#10152,.F.); +#10152 = EDGE_CURVE('',#10143,#10119,#10153,.T.); +#10153 = LINE('',#10154,#10155); +#10154 = CARTESIAN_POINT('',(4.9,-8.,3.)); +#10155 = VECTOR('',#10156,1.); +#10156 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#10157 = PLANE('',#10158); +#10158 = AXIS2_PLACEMENT_3D('',#10159,#10160,#10161); +#10159 = CARTESIAN_POINT('',(4.9,-8.,3.)); +#10160 = DIRECTION('',(-1.110223024625E-16,1.232595164408E-32,1.)); +#10161 = DIRECTION('',(-1.110223024625E-16,-1.,5.167288087198E-45)); +#10162 = ADVANCED_FACE('',(#10163),#10181,.F.); +#10163 = FACE_BOUND('',#10164,.F.); +#10164 = EDGE_LOOP('',(#10165,#10173,#10174,#10175)); +#10165 = ORIENTED_EDGE('',*,*,#10166,.T.); +#10166 = EDGE_CURVE('',#10167,#9768,#10169,.T.); +#10167 = VERTEX_POINT('',#10168); +#10168 = CARTESIAN_POINT('',(4.9,-8.,0.)); +#10169 = LINE('',#10170,#10171); +#10170 = CARTESIAN_POINT('',(4.9,-8.,0.)); +#10171 = VECTOR('',#10172,1.); +#10172 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10173 = ORIENTED_EDGE('',*,*,#9775,.T.); +#10174 = ORIENTED_EDGE('',*,*,#10142,.F.); +#10175 = ORIENTED_EDGE('',*,*,#10176,.F.); +#10176 = EDGE_CURVE('',#10167,#10143,#10177,.T.); +#10177 = LINE('',#10178,#10179); +#10178 = CARTESIAN_POINT('',(4.9,-8.,8.881784197001E-16)); +#10179 = VECTOR('',#10180,1.); +#10180 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#10181 = PLANE('',#10182); +#10182 = AXIS2_PLACEMENT_3D('',#10183,#10184,#10185); +#10183 = CARTESIAN_POINT('',(4.9,-8.,0.)); +#10184 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#10185 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#10186 = ADVANCED_FACE('',(#10187),#10205,.T.); +#10187 = FACE_BOUND('',#10188,.T.); +#10188 = EDGE_LOOP('',(#10189,#10197,#10198,#10199)); +#10189 = ORIENTED_EDGE('',*,*,#10190,.F.); +#10190 = EDGE_CURVE('',#10167,#10191,#10193,.T.); +#10191 = VERTEX_POINT('',#10192); +#10192 = CARTESIAN_POINT('',(4.9,-8.,-2.5)); +#10193 = LINE('',#10194,#10195); +#10194 = CARTESIAN_POINT('',(4.9,-8.,8.881784197001E-16)); +#10195 = VECTOR('',#10196,1.); +#10196 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#10197 = ORIENTED_EDGE('',*,*,#10166,.T.); +#10198 = ORIENTED_EDGE('',*,*,#9767,.T.); +#10199 = ORIENTED_EDGE('',*,*,#10200,.F.); +#10200 = EDGE_CURVE('',#10191,#9760,#10201,.T.); +#10201 = LINE('',#10202,#10203); +#10202 = CARTESIAN_POINT('',(4.9,-8.,-2.5)); +#10203 = VECTOR('',#10204,1.); +#10204 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10205 = PLANE('',#10206); +#10206 = AXIS2_PLACEMENT_3D('',#10207,#10208,#10209); +#10207 = CARTESIAN_POINT('',(4.9,-8.,0.)); +#10208 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#10209 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#10210 = ADVANCED_FACE('',(#10211),#10229,.T.); +#10211 = FACE_BOUND('',#10212,.F.); +#10212 = EDGE_LOOP('',(#10213,#10221,#10227,#10228)); +#10213 = ORIENTED_EDGE('',*,*,#10214,.F.); +#10214 = EDGE_CURVE('',#10215,#10191,#10217,.T.); +#10215 = VERTEX_POINT('',#10216); +#10216 = CARTESIAN_POINT('',(4.9,-7.5,-3.)); +#10217 = LINE('',#10218,#10219); +#10218 = CARTESIAN_POINT('',(4.9,-7.75,-2.75)); +#10219 = VECTOR('',#10220,1.); +#10220 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#10221 = ORIENTED_EDGE('',*,*,#10222,.T.); +#10222 = EDGE_CURVE('',#10215,#9752,#10223,.T.); +#10223 = LINE('',#10224,#10225); +#10224 = CARTESIAN_POINT('',(4.9,-7.5,-3.)); +#10225 = VECTOR('',#10226,1.); +#10226 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#10227 = ORIENTED_EDGE('',*,*,#9759,.T.); +#10228 = ORIENTED_EDGE('',*,*,#10200,.F.); +#10229 = PLANE('',#10230); +#10230 = AXIS2_PLACEMENT_3D('',#10231,#10232,#10233); +#10231 = CARTESIAN_POINT('',(4.9,-7.75,-2.75)); +#10232 = DIRECTION('',(9.043085361258E-17,-0.707106781187, + -0.707106781187)); +#10233 = DIRECTION('',(1.,8.43311858671E-18,1.194554210492E-16)); +#10234 = ADVANCED_FACE('',(#10235),#10246,.T.); +#10235 = FACE_BOUND('',#10236,.T.); +#10236 = EDGE_LOOP('',(#10237,#10243,#10244,#10245)); +#10237 = ORIENTED_EDGE('',*,*,#10238,.F.); +#10238 = EDGE_CURVE('',#10215,#9951,#10239,.T.); +#10239 = LINE('',#10240,#10241); +#10240 = CARTESIAN_POINT('',(4.9,-8.,-3.)); +#10241 = VECTOR('',#10242,1.); +#10242 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#10243 = ORIENTED_EDGE('',*,*,#10222,.T.); +#10244 = ORIENTED_EDGE('',*,*,#9751,.T.); +#10245 = ORIENTED_EDGE('',*,*,#9960,.F.); +#10246 = PLANE('',#10247); +#10247 = AXIS2_PLACEMENT_3D('',#10248,#10249,#10250); +#10248 = CARTESIAN_POINT('',(4.9,-8.,-3.)); +#10249 = DIRECTION('',(1.110223024625E-16,-1.232595164408E-32,-1.)); +#10250 = DIRECTION('',(1.110223024625E-16,1.,-5.167288087198E-45)); +#10251 = ADVANCED_FACE('',(#10252),#10270,.F.); +#10252 = FACE_BOUND('',#10253,.F.); +#10253 = EDGE_LOOP('',(#10254,#10255,#10256,#10257,#10258,#10259,#10260, + #10261,#10262,#10263,#10264,#10265,#10266,#10267,#10268,#10269)); +#10254 = ORIENTED_EDGE('',*,*,#9950,.F.); +#10255 = ORIENTED_EDGE('',*,*,#10238,.F.); +#10256 = ORIENTED_EDGE('',*,*,#10214,.T.); +#10257 = ORIENTED_EDGE('',*,*,#10190,.F.); +#10258 = ORIENTED_EDGE('',*,*,#10176,.T.); +#10259 = ORIENTED_EDGE('',*,*,#10152,.T.); +#10260 = ORIENTED_EDGE('',*,*,#10128,.T.); +#10261 = ORIENTED_EDGE('',*,*,#10104,.T.); +#10262 = ORIENTED_EDGE('',*,*,#9902,.T.); +#10263 = ORIENTED_EDGE('',*,*,#9888,.F.); +#10264 = ORIENTED_EDGE('',*,*,#9926,.T.); +#10265 = ORIENTED_EDGE('',*,*,#10080,.T.); +#10266 = ORIENTED_EDGE('',*,*,#10063,.T.); +#10267 = ORIENTED_EDGE('',*,*,#10039,.T.); +#10268 = ORIENTED_EDGE('',*,*,#10015,.T.); +#10269 = ORIENTED_EDGE('',*,*,#9981,.F.); +#10270 = PLANE('',#10271); +#10271 = AXIS2_PLACEMENT_3D('',#10272,#10273,#10274); +#10272 = CARTESIAN_POINT('',(4.9,-8.,-3.)); +#10273 = DIRECTION('',(-1.,0.,-1.110223024625E-16)); +#10274 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#10275 = MANIFOLD_SOLID_BREP('',#10276); +#10276 = CLOSED_SHELL('',(#10277,#10317,#10356,#10395,#10555,#10588, + #10612,#10629,#10653,#10670,#10694,#10718,#10742,#10766,#10798, + #10830,#10858,#10889,#10929,#10953,#10986,#11017,#11057,#11081, + #11114,#11139,#11156,#11173,#11197,#11221,#11240,#11265,#11282, + #11299,#11311,#11328,#11345,#11357,#11366,#11378,#11398,#11423)); +#10277 = ADVANCED_FACE('',(#10278),#10312,.T.); +#10278 = FACE_BOUND('',#10279,.T.); +#10279 = EDGE_LOOP('',(#10280,#10290,#10298,#10306)); +#10280 = ORIENTED_EDGE('',*,*,#10281,.T.); +#10281 = EDGE_CURVE('',#10282,#10284,#10286,.T.); +#10282 = VERTEX_POINT('',#10283); +#10283 = CARTESIAN_POINT('',(-5.,1.,0.)); +#10284 = VERTEX_POINT('',#10285); +#10285 = CARTESIAN_POINT('',(-5.,1.,9.)); +#10286 = LINE('',#10287,#10288); +#10287 = CARTESIAN_POINT('',(-5.,1.,0.)); +#10288 = VECTOR('',#10289,1.); +#10289 = DIRECTION('',(0.,0.,1.)); +#10290 = ORIENTED_EDGE('',*,*,#10291,.T.); +#10291 = EDGE_CURVE('',#10284,#10292,#10294,.T.); +#10292 = VERTEX_POINT('',#10293); +#10293 = CARTESIAN_POINT('',(5.,1.,9.)); +#10294 = LINE('',#10295,#10296); +#10295 = CARTESIAN_POINT('',(-5.,1.,9.)); +#10296 = VECTOR('',#10297,1.); +#10297 = DIRECTION('',(1.,0.,0.)); +#10298 = ORIENTED_EDGE('',*,*,#10299,.F.); +#10299 = EDGE_CURVE('',#10300,#10292,#10302,.T.); +#10300 = VERTEX_POINT('',#10301); +#10301 = CARTESIAN_POINT('',(5.,1.,0.)); +#10302 = LINE('',#10303,#10304); +#10303 = CARTESIAN_POINT('',(5.,1.,0.)); +#10304 = VECTOR('',#10305,1.); +#10305 = DIRECTION('',(0.,0.,1.)); +#10306 = ORIENTED_EDGE('',*,*,#10307,.F.); +#10307 = EDGE_CURVE('',#10282,#10300,#10308,.T.); +#10308 = LINE('',#10309,#10310); +#10309 = CARTESIAN_POINT('',(-5.,1.,0.)); +#10310 = VECTOR('',#10311,1.); +#10311 = DIRECTION('',(1.,0.,0.)); +#10312 = PLANE('',#10313); +#10313 = AXIS2_PLACEMENT_3D('',#10314,#10315,#10316); +#10314 = CARTESIAN_POINT('',(-5.,1.,0.)); +#10315 = DIRECTION('',(0.,1.,0.)); +#10316 = DIRECTION('',(1.,0.,0.)); +#10317 = ADVANCED_FACE('',(#10318),#10351,.T.); +#10318 = FACE_BOUND('',#10319,.T.); +#10319 = EDGE_LOOP('',(#10320,#10328,#10336,#10344,#10350)); +#10320 = ORIENTED_EDGE('',*,*,#10321,.F.); +#10321 = EDGE_CURVE('',#10322,#10282,#10324,.T.); +#10322 = VERTEX_POINT('',#10323); +#10323 = CARTESIAN_POINT('',(-5.,-2.,0.)); +#10324 = LINE('',#10325,#10326); +#10325 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#10326 = VECTOR('',#10327,1.); +#10327 = DIRECTION('',(0.,1.,0.)); +#10328 = ORIENTED_EDGE('',*,*,#10329,.F.); +#10329 = EDGE_CURVE('',#10330,#10322,#10332,.T.); +#10330 = VERTEX_POINT('',#10331); +#10331 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#10332 = LINE('',#10333,#10334); +#10333 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#10334 = VECTOR('',#10335,1.); +#10335 = DIRECTION('',(0.,0.,-1.)); +#10336 = ORIENTED_EDGE('',*,*,#10337,.F.); +#10337 = EDGE_CURVE('',#10338,#10330,#10340,.T.); +#10338 = VERTEX_POINT('',#10339); +#10339 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#10340 = LINE('',#10341,#10342); +#10341 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#10342 = VECTOR('',#10343,1.); +#10343 = DIRECTION('',(-0.,-0.,-1.)); +#10344 = ORIENTED_EDGE('',*,*,#10345,.T.); +#10345 = EDGE_CURVE('',#10338,#10284,#10346,.T.); +#10346 = LINE('',#10347,#10348); +#10347 = CARTESIAN_POINT('',(-5.,-12.,9.)); +#10348 = VECTOR('',#10349,1.); +#10349 = DIRECTION('',(0.,1.,0.)); +#10350 = ORIENTED_EDGE('',*,*,#10281,.F.); +#10351 = PLANE('',#10352); +#10352 = AXIS2_PLACEMENT_3D('',#10353,#10354,#10355); +#10353 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#10354 = DIRECTION('',(-1.,0.,0.)); +#10355 = DIRECTION('',(0.,1.,0.)); +#10356 = ADVANCED_FACE('',(#10357),#10390,.T.); +#10357 = FACE_BOUND('',#10358,.T.); +#10358 = EDGE_LOOP('',(#10359,#10367,#10368,#10376,#10384)); +#10359 = ORIENTED_EDGE('',*,*,#10360,.F.); +#10360 = EDGE_CURVE('',#10300,#10361,#10363,.T.); +#10361 = VERTEX_POINT('',#10362); +#10362 = CARTESIAN_POINT('',(5.,-2.,0.)); +#10363 = LINE('',#10364,#10365); +#10364 = CARTESIAN_POINT('',(5.,1.,0.)); +#10365 = VECTOR('',#10366,1.); +#10366 = DIRECTION('',(0.,-1.,0.)); +#10367 = ORIENTED_EDGE('',*,*,#10299,.T.); +#10368 = ORIENTED_EDGE('',*,*,#10369,.T.); +#10369 = EDGE_CURVE('',#10292,#10370,#10372,.T.); +#10370 = VERTEX_POINT('',#10371); +#10371 = CARTESIAN_POINT('',(5.,-2.,9.)); +#10372 = LINE('',#10373,#10374); +#10373 = CARTESIAN_POINT('',(5.,1.,9.)); +#10374 = VECTOR('',#10375,1.); +#10375 = DIRECTION('',(0.,-1.,0.)); +#10376 = ORIENTED_EDGE('',*,*,#10377,.T.); +#10377 = EDGE_CURVE('',#10370,#10378,#10380,.T.); +#10378 = VERTEX_POINT('',#10379); +#10379 = CARTESIAN_POINT('',(5.,-2.,8.5)); +#10380 = LINE('',#10381,#10382); +#10381 = CARTESIAN_POINT('',(5.,-2.,9.)); +#10382 = VECTOR('',#10383,1.); +#10383 = DIRECTION('',(-0.,-0.,-1.)); +#10384 = ORIENTED_EDGE('',*,*,#10385,.F.); +#10385 = EDGE_CURVE('',#10361,#10378,#10386,.T.); +#10386 = LINE('',#10387,#10388); +#10387 = CARTESIAN_POINT('',(5.,-2.,0.)); +#10388 = VECTOR('',#10389,1.); +#10389 = DIRECTION('',(0.,0.,1.)); +#10390 = PLANE('',#10391); +#10391 = AXIS2_PLACEMENT_3D('',#10392,#10393,#10394); +#10392 = CARTESIAN_POINT('',(5.,1.,0.)); +#10393 = DIRECTION('',(1.,0.,0.)); +#10394 = DIRECTION('',(0.,-1.,0.)); +#10395 = ADVANCED_FACE('',(#10396,#10471,#10505,#10539),#10550,.F.); +#10396 = FACE_BOUND('',#10397,.F.); +#10397 = EDGE_LOOP('',(#10398,#10399,#10400,#10408,#10416,#10424,#10432, + #10440,#10448,#10456,#10464,#10470)); +#10398 = ORIENTED_EDGE('',*,*,#10307,.F.); +#10399 = ORIENTED_EDGE('',*,*,#10321,.F.); +#10400 = ORIENTED_EDGE('',*,*,#10401,.T.); +#10401 = EDGE_CURVE('',#10322,#10402,#10404,.T.); +#10402 = VERTEX_POINT('',#10403); +#10403 = CARTESIAN_POINT('',(-4.5,-2.,0.)); +#10404 = LINE('',#10405,#10406); +#10405 = CARTESIAN_POINT('',(-5.,-2.,0.)); +#10406 = VECTOR('',#10407,1.); +#10407 = DIRECTION('',(1.,0.,0.)); +#10408 = ORIENTED_EDGE('',*,*,#10409,.T.); +#10409 = EDGE_CURVE('',#10402,#10410,#10412,.T.); +#10410 = VERTEX_POINT('',#10411); +#10411 = CARTESIAN_POINT('',(-4.5,-11.,0.)); +#10412 = LINE('',#10413,#10414); +#10413 = CARTESIAN_POINT('',(-4.5,-2.,0.)); +#10414 = VECTOR('',#10415,1.); +#10415 = DIRECTION('',(0.,-1.,0.)); +#10416 = ORIENTED_EDGE('',*,*,#10417,.F.); +#10417 = EDGE_CURVE('',#10418,#10410,#10420,.T.); +#10418 = VERTEX_POINT('',#10419); +#10419 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#10420 = LINE('',#10421,#10422); +#10421 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#10422 = VECTOR('',#10423,1.); +#10423 = DIRECTION('',(1.,0.,0.)); +#10424 = ORIENTED_EDGE('',*,*,#10425,.F.); +#10425 = EDGE_CURVE('',#10426,#10418,#10428,.T.); +#10426 = VERTEX_POINT('',#10427); +#10427 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#10428 = LINE('',#10429,#10430); +#10429 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#10430 = VECTOR('',#10431,1.); +#10431 = DIRECTION('',(0.,1.,0.)); +#10432 = ORIENTED_EDGE('',*,*,#10433,.F.); +#10433 = EDGE_CURVE('',#10434,#10426,#10436,.T.); +#10434 = VERTEX_POINT('',#10435); +#10435 = CARTESIAN_POINT('',(5.,-12.,0.)); +#10436 = LINE('',#10437,#10438); +#10437 = CARTESIAN_POINT('',(5.,-12.,0.)); +#10438 = VECTOR('',#10439,1.); +#10439 = DIRECTION('',(-1.,0.,0.)); +#10440 = ORIENTED_EDGE('',*,*,#10441,.F.); +#10441 = EDGE_CURVE('',#10442,#10434,#10444,.T.); +#10442 = VERTEX_POINT('',#10443); +#10443 = CARTESIAN_POINT('',(5.,-11.,0.)); +#10444 = LINE('',#10445,#10446); +#10445 = CARTESIAN_POINT('',(5.,1.,0.)); +#10446 = VECTOR('',#10447,1.); +#10447 = DIRECTION('',(0.,-1.,0.)); +#10448 = ORIENTED_EDGE('',*,*,#10449,.T.); +#10449 = EDGE_CURVE('',#10442,#10450,#10452,.T.); +#10450 = VERTEX_POINT('',#10451); +#10451 = CARTESIAN_POINT('',(4.5,-11.,0.)); +#10452 = LINE('',#10453,#10454); +#10453 = CARTESIAN_POINT('',(5.,-11.,0.)); +#10454 = VECTOR('',#10455,1.); +#10455 = DIRECTION('',(-1.,-0.,-0.)); +#10456 = ORIENTED_EDGE('',*,*,#10457,.T.); +#10457 = EDGE_CURVE('',#10450,#10458,#10460,.T.); +#10458 = VERTEX_POINT('',#10459); +#10459 = CARTESIAN_POINT('',(4.5,-2.,0.)); +#10460 = LINE('',#10461,#10462); +#10461 = CARTESIAN_POINT('',(4.5,-11.,0.)); +#10462 = VECTOR('',#10463,1.); +#10463 = DIRECTION('',(0.,1.,0.)); +#10464 = ORIENTED_EDGE('',*,*,#10465,.F.); +#10465 = EDGE_CURVE('',#10361,#10458,#10466,.T.); +#10466 = LINE('',#10467,#10468); +#10467 = CARTESIAN_POINT('',(5.,-2.,0.)); +#10468 = VECTOR('',#10469,1.); +#10469 = DIRECTION('',(-1.,-0.,-0.)); +#10470 = ORIENTED_EDGE('',*,*,#10360,.F.); +#10471 = FACE_BOUND('',#10472,.F.); +#10472 = EDGE_LOOP('',(#10473,#10483,#10491,#10499)); +#10473 = ORIENTED_EDGE('',*,*,#10474,.F.); +#10474 = EDGE_CURVE('',#10475,#10477,#10479,.T.); +#10475 = VERTEX_POINT('',#10476); +#10476 = CARTESIAN_POINT('',(1.25,-0.15,0.)); +#10477 = VERTEX_POINT('',#10478); +#10478 = CARTESIAN_POINT('',(1.25,0.15,-9.992007221626E-17)); +#10479 = LINE('',#10480,#10481); +#10480 = CARTESIAN_POINT('',(1.25,-0.15,0.)); +#10481 = VECTOR('',#10482,1.); +#10482 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#10483 = ORIENTED_EDGE('',*,*,#10484,.T.); +#10484 = EDGE_CURVE('',#10475,#10485,#10487,.T.); +#10485 = VERTEX_POINT('',#10486); +#10486 = CARTESIAN_POINT('',(-1.25,-0.15,0.)); +#10487 = LINE('',#10488,#10489); +#10488 = CARTESIAN_POINT('',(1.25,-0.15,0.)); +#10489 = VECTOR('',#10490,1.); +#10490 = DIRECTION('',(-1.,0.,0.)); +#10491 = ORIENTED_EDGE('',*,*,#10492,.T.); +#10492 = EDGE_CURVE('',#10485,#10493,#10495,.T.); +#10493 = VERTEX_POINT('',#10494); +#10494 = CARTESIAN_POINT('',(-1.25,0.15,-9.992007221626E-17)); +#10495 = LINE('',#10496,#10497); +#10496 = CARTESIAN_POINT('',(-1.25,-0.15,0.)); +#10497 = VECTOR('',#10498,1.); +#10498 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#10499 = ORIENTED_EDGE('',*,*,#10500,.F.); +#10500 = EDGE_CURVE('',#10477,#10493,#10501,.T.); +#10501 = LINE('',#10502,#10503); +#10502 = CARTESIAN_POINT('',(1.25,0.15,-9.992007221626E-17)); +#10503 = VECTOR('',#10504,1.); +#10504 = DIRECTION('',(-1.,0.,0.)); +#10505 = FACE_BOUND('',#10506,.F.); +#10506 = EDGE_LOOP('',(#10507,#10517,#10525,#10533)); +#10507 = ORIENTED_EDGE('',*,*,#10508,.F.); +#10508 = EDGE_CURVE('',#10509,#10511,#10513,.T.); +#10509 = VERTEX_POINT('',#10510); +#10510 = CARTESIAN_POINT('',(0.9,-6.15,0.)); +#10511 = VERTEX_POINT('',#10512); +#10512 = CARTESIAN_POINT('',(0.9,-5.85,-9.992007221626E-17)); +#10513 = LINE('',#10514,#10515); +#10514 = CARTESIAN_POINT('',(0.9,-6.15,0.)); +#10515 = VECTOR('',#10516,1.); +#10516 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#10517 = ORIENTED_EDGE('',*,*,#10518,.T.); +#10518 = EDGE_CURVE('',#10509,#10519,#10521,.T.); +#10519 = VERTEX_POINT('',#10520); +#10520 = CARTESIAN_POINT('',(-0.9,-6.15,0.)); +#10521 = LINE('',#10522,#10523); +#10522 = CARTESIAN_POINT('',(0.9,-6.15,0.)); +#10523 = VECTOR('',#10524,1.); +#10524 = DIRECTION('',(-1.,0.,0.)); +#10525 = ORIENTED_EDGE('',*,*,#10526,.T.); +#10526 = EDGE_CURVE('',#10519,#10527,#10529,.T.); +#10527 = VERTEX_POINT('',#10528); +#10528 = CARTESIAN_POINT('',(-0.9,-5.85,-9.992007221626E-17)); +#10529 = LINE('',#10530,#10531); +#10530 = CARTESIAN_POINT('',(-0.9,-6.15,0.)); +#10531 = VECTOR('',#10532,1.); +#10532 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#10533 = ORIENTED_EDGE('',*,*,#10534,.F.); +#10534 = EDGE_CURVE('',#10511,#10527,#10535,.T.); +#10535 = LINE('',#10536,#10537); +#10536 = CARTESIAN_POINT('',(0.9,-5.85,-9.992007221626E-17)); +#10537 = VECTOR('',#10538,1.); +#10538 = DIRECTION('',(-1.,0.,0.)); +#10539 = FACE_BOUND('',#10540,.F.); +#10540 = EDGE_LOOP('',(#10541)); +#10541 = ORIENTED_EDGE('',*,*,#10542,.F.); +#10542 = EDGE_CURVE('',#10543,#10543,#10545,.T.); +#10543 = VERTEX_POINT('',#10544); +#10544 = CARTESIAN_POINT('',(0.75,-9.,0.)); +#10545 = CIRCLE('',#10546,0.75); +#10546 = AXIS2_PLACEMENT_3D('',#10547,#10548,#10549); +#10547 = CARTESIAN_POINT('',(0.,-9.,0.)); +#10548 = DIRECTION('',(0.,0.,1.)); +#10549 = DIRECTION('',(1.,0.,-0.)); +#10550 = PLANE('',#10551); +#10551 = AXIS2_PLACEMENT_3D('',#10552,#10553,#10554); +#10552 = CARTESIAN_POINT('',(-5.,1.,0.)); +#10553 = DIRECTION('',(0.,0.,1.)); +#10554 = DIRECTION('',(1.,0.,-0.)); +#10555 = ADVANCED_FACE('',(#10556),#10583,.T.); +#10556 = FACE_BOUND('',#10557,.T.); +#10557 = EDGE_LOOP('',(#10558,#10559,#10560,#10568,#10576,#10582)); +#10558 = ORIENTED_EDGE('',*,*,#10291,.F.); +#10559 = ORIENTED_EDGE('',*,*,#10345,.F.); +#10560 = ORIENTED_EDGE('',*,*,#10561,.T.); +#10561 = EDGE_CURVE('',#10338,#10562,#10564,.T.); +#10562 = VERTEX_POINT('',#10563); +#10563 = CARTESIAN_POINT('',(-4.5,-2.,9.)); +#10564 = LINE('',#10565,#10566); +#10565 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#10566 = VECTOR('',#10567,1.); +#10567 = DIRECTION('',(1.,0.,0.)); +#10568 = ORIENTED_EDGE('',*,*,#10569,.T.); +#10569 = EDGE_CURVE('',#10562,#10570,#10572,.T.); +#10570 = VERTEX_POINT('',#10571); +#10571 = CARTESIAN_POINT('',(4.5,-2.,9.)); +#10572 = LINE('',#10573,#10574); +#10573 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#10574 = VECTOR('',#10575,1.); +#10575 = DIRECTION('',(1.,0.,0.)); +#10576 = ORIENTED_EDGE('',*,*,#10577,.F.); +#10577 = EDGE_CURVE('',#10370,#10570,#10578,.T.); +#10578 = LINE('',#10579,#10580); +#10579 = CARTESIAN_POINT('',(5.,-2.,9.)); +#10580 = VECTOR('',#10581,1.); +#10581 = DIRECTION('',(-1.,-0.,-0.)); +#10582 = ORIENTED_EDGE('',*,*,#10369,.F.); +#10583 = PLANE('',#10584); +#10584 = AXIS2_PLACEMENT_3D('',#10585,#10586,#10587); +#10585 = CARTESIAN_POINT('',(-5.,1.,9.)); +#10586 = DIRECTION('',(0.,0.,1.)); +#10587 = DIRECTION('',(1.,0.,-0.)); +#10588 = ADVANCED_FACE('',(#10589),#10607,.F.); +#10589 = FACE_BOUND('',#10590,.F.); +#10590 = EDGE_LOOP('',(#10591,#10592,#10600,#10606)); +#10591 = ORIENTED_EDGE('',*,*,#10329,.F.); +#10592 = ORIENTED_EDGE('',*,*,#10593,.T.); +#10593 = EDGE_CURVE('',#10330,#10594,#10596,.T.); +#10594 = VERTEX_POINT('',#10595); +#10595 = CARTESIAN_POINT('',(-4.5,-2.,8.5)); +#10596 = LINE('',#10597,#10598); +#10597 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#10598 = VECTOR('',#10599,1.); +#10599 = DIRECTION('',(1.,0.,0.)); +#10600 = ORIENTED_EDGE('',*,*,#10601,.T.); +#10601 = EDGE_CURVE('',#10594,#10402,#10602,.T.); +#10602 = LINE('',#10603,#10604); +#10603 = CARTESIAN_POINT('',(-4.5,-2.,9.)); +#10604 = VECTOR('',#10605,1.); +#10605 = DIRECTION('',(0.,0.,-1.)); +#10606 = ORIENTED_EDGE('',*,*,#10401,.F.); +#10607 = PLANE('',#10608); +#10608 = AXIS2_PLACEMENT_3D('',#10609,#10610,#10611); +#10609 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#10610 = DIRECTION('',(0.,1.,0.)); +#10611 = DIRECTION('',(0.,0.,-1.)); +#10612 = ADVANCED_FACE('',(#10613),#10624,.F.); +#10613 = FACE_BOUND('',#10614,.F.); +#10614 = EDGE_LOOP('',(#10615,#10616,#10617,#10623)); +#10615 = ORIENTED_EDGE('',*,*,#10337,.F.); +#10616 = ORIENTED_EDGE('',*,*,#10561,.T.); +#10617 = ORIENTED_EDGE('',*,*,#10618,.T.); +#10618 = EDGE_CURVE('',#10562,#10594,#10619,.T.); +#10619 = LINE('',#10620,#10621); +#10620 = CARTESIAN_POINT('',(-4.5,-2.,9.)); +#10621 = VECTOR('',#10622,1.); +#10622 = DIRECTION('',(0.,0.,-1.)); +#10623 = ORIENTED_EDGE('',*,*,#10593,.F.); +#10624 = PLANE('',#10625); +#10625 = AXIS2_PLACEMENT_3D('',#10626,#10627,#10628); +#10626 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#10627 = DIRECTION('',(0.,1.,0.)); +#10628 = DIRECTION('',(0.,0.,-1.)); +#10629 = ADVANCED_FACE('',(#10630),#10648,.F.); +#10630 = FACE_BOUND('',#10631,.F.); +#10631 = EDGE_LOOP('',(#10632,#10633,#10634,#10642)); +#10632 = ORIENTED_EDGE('',*,*,#10385,.F.); +#10633 = ORIENTED_EDGE('',*,*,#10465,.T.); +#10634 = ORIENTED_EDGE('',*,*,#10635,.T.); +#10635 = EDGE_CURVE('',#10458,#10636,#10638,.T.); +#10636 = VERTEX_POINT('',#10637); +#10637 = CARTESIAN_POINT('',(4.5,-2.,8.5)); +#10638 = LINE('',#10639,#10640); +#10639 = CARTESIAN_POINT('',(4.5,-2.,0.)); +#10640 = VECTOR('',#10641,1.); +#10641 = DIRECTION('',(0.,0.,1.)); +#10642 = ORIENTED_EDGE('',*,*,#10643,.T.); +#10643 = EDGE_CURVE('',#10636,#10378,#10644,.T.); +#10644 = LINE('',#10645,#10646); +#10645 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#10646 = VECTOR('',#10647,1.); +#10647 = DIRECTION('',(1.,0.,0.)); +#10648 = PLANE('',#10649); +#10649 = AXIS2_PLACEMENT_3D('',#10650,#10651,#10652); +#10650 = CARTESIAN_POINT('',(5.,-2.,0.)); +#10651 = DIRECTION('',(0.,1.,0.)); +#10652 = DIRECTION('',(0.,-0.,1.)); +#10653 = ADVANCED_FACE('',(#10654),#10665,.F.); +#10654 = FACE_BOUND('',#10655,.F.); +#10655 = EDGE_LOOP('',(#10656,#10657,#10658,#10664)); +#10656 = ORIENTED_EDGE('',*,*,#10377,.T.); +#10657 = ORIENTED_EDGE('',*,*,#10643,.F.); +#10658 = ORIENTED_EDGE('',*,*,#10659,.T.); +#10659 = EDGE_CURVE('',#10636,#10570,#10660,.T.); +#10660 = LINE('',#10661,#10662); +#10661 = CARTESIAN_POINT('',(4.5,-2.,0.)); +#10662 = VECTOR('',#10663,1.); +#10663 = DIRECTION('',(0.,0.,1.)); +#10664 = ORIENTED_EDGE('',*,*,#10577,.F.); +#10665 = PLANE('',#10666); +#10666 = AXIS2_PLACEMENT_3D('',#10667,#10668,#10669); +#10667 = CARTESIAN_POINT('',(5.,-2.,0.)); +#10668 = DIRECTION('',(0.,1.,0.)); +#10669 = DIRECTION('',(0.,-0.,1.)); +#10670 = ADVANCED_FACE('',(#10671),#10689,.F.); +#10671 = FACE_BOUND('',#10672,.F.); +#10672 = EDGE_LOOP('',(#10673,#10674,#10675,#10683)); +#10673 = ORIENTED_EDGE('',*,*,#10409,.F.); +#10674 = ORIENTED_EDGE('',*,*,#10601,.F.); +#10675 = ORIENTED_EDGE('',*,*,#10676,.T.); +#10676 = EDGE_CURVE('',#10594,#10677,#10679,.T.); +#10677 = VERTEX_POINT('',#10678); +#10678 = CARTESIAN_POINT('',(-4.5,-11.,8.5)); +#10679 = LINE('',#10680,#10681); +#10680 = CARTESIAN_POINT('',(-4.5,-2.,8.5)); +#10681 = VECTOR('',#10682,1.); +#10682 = DIRECTION('',(0.,-1.,0.)); +#10683 = ORIENTED_EDGE('',*,*,#10684,.F.); +#10684 = EDGE_CURVE('',#10410,#10677,#10685,.T.); +#10685 = LINE('',#10686,#10687); +#10686 = CARTESIAN_POINT('',(-4.5,-11.,0.)); +#10687 = VECTOR('',#10688,1.); +#10688 = DIRECTION('',(0.,0.,1.)); +#10689 = PLANE('',#10690); +#10690 = AXIS2_PLACEMENT_3D('',#10691,#10692,#10693); +#10691 = CARTESIAN_POINT('',(-4.5,-2.,0.)); +#10692 = DIRECTION('',(1.,0.,0.)); +#10693 = DIRECTION('',(0.,0.,1.)); +#10694 = ADVANCED_FACE('',(#10695),#10713,.F.); +#10695 = FACE_BOUND('',#10696,.F.); +#10696 = EDGE_LOOP('',(#10697,#10698,#10706,#10712)); +#10697 = ORIENTED_EDGE('',*,*,#10457,.F.); +#10698 = ORIENTED_EDGE('',*,*,#10699,.F.); +#10699 = EDGE_CURVE('',#10700,#10450,#10702,.T.); +#10700 = VERTEX_POINT('',#10701); +#10701 = CARTESIAN_POINT('',(4.5,-11.,8.5)); +#10702 = LINE('',#10703,#10704); +#10703 = CARTESIAN_POINT('',(4.5,-11.,9.)); +#10704 = VECTOR('',#10705,1.); +#10705 = DIRECTION('',(0.,0.,-1.)); +#10706 = ORIENTED_EDGE('',*,*,#10707,.T.); +#10707 = EDGE_CURVE('',#10700,#10636,#10708,.T.); +#10708 = LINE('',#10709,#10710); +#10709 = CARTESIAN_POINT('',(4.5,-6.5,8.5)); +#10710 = VECTOR('',#10711,1.); +#10711 = DIRECTION('',(0.,1.,0.)); +#10712 = ORIENTED_EDGE('',*,*,#10635,.F.); +#10713 = PLANE('',#10714); +#10714 = AXIS2_PLACEMENT_3D('',#10715,#10716,#10717); +#10715 = CARTESIAN_POINT('',(4.5,-11.,0.)); +#10716 = DIRECTION('',(-1.,0.,0.)); +#10717 = DIRECTION('',(0.,0.,-1.)); +#10718 = ADVANCED_FACE('',(#10719),#10737,.F.); +#10719 = FACE_BOUND('',#10720,.F.); +#10720 = EDGE_LOOP('',(#10721,#10729,#10730,#10731)); +#10721 = ORIENTED_EDGE('',*,*,#10722,.F.); +#10722 = EDGE_CURVE('',#10418,#10723,#10725,.T.); +#10723 = VERTEX_POINT('',#10724); +#10724 = CARTESIAN_POINT('',(-5.,-11.,8.5)); +#10725 = LINE('',#10726,#10727); +#10726 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#10727 = VECTOR('',#10728,1.); +#10728 = DIRECTION('',(0.,0.,1.)); +#10729 = ORIENTED_EDGE('',*,*,#10417,.T.); +#10730 = ORIENTED_EDGE('',*,*,#10684,.T.); +#10731 = ORIENTED_EDGE('',*,*,#10732,.T.); +#10732 = EDGE_CURVE('',#10677,#10723,#10733,.T.); +#10733 = LINE('',#10734,#10735); +#10734 = CARTESIAN_POINT('',(5.,-11.,8.5)); +#10735 = VECTOR('',#10736,1.); +#10736 = DIRECTION('',(-1.,0.,0.)); +#10737 = PLANE('',#10738); +#10738 = AXIS2_PLACEMENT_3D('',#10739,#10740,#10741); +#10739 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#10740 = DIRECTION('',(0.,-1.,0.)); +#10741 = DIRECTION('',(0.,0.,1.)); +#10742 = ADVANCED_FACE('',(#10743),#10761,.F.); +#10743 = FACE_BOUND('',#10744,.F.); +#10744 = EDGE_LOOP('',(#10745,#10753,#10759,#10760)); +#10745 = ORIENTED_EDGE('',*,*,#10746,.F.); +#10746 = EDGE_CURVE('',#10747,#10442,#10749,.T.); +#10747 = VERTEX_POINT('',#10748); +#10748 = CARTESIAN_POINT('',(5.,-11.,8.5)); +#10749 = LINE('',#10750,#10751); +#10750 = CARTESIAN_POINT('',(5.,-11.,9.)); +#10751 = VECTOR('',#10752,1.); +#10752 = DIRECTION('',(0.,0.,-1.)); +#10753 = ORIENTED_EDGE('',*,*,#10754,.T.); +#10754 = EDGE_CURVE('',#10747,#10700,#10755,.T.); +#10755 = LINE('',#10756,#10757); +#10756 = CARTESIAN_POINT('',(5.,-11.,8.5)); +#10757 = VECTOR('',#10758,1.); +#10758 = DIRECTION('',(-1.,0.,0.)); +#10759 = ORIENTED_EDGE('',*,*,#10699,.T.); +#10760 = ORIENTED_EDGE('',*,*,#10449,.F.); +#10761 = PLANE('',#10762); +#10762 = AXIS2_PLACEMENT_3D('',#10763,#10764,#10765); +#10763 = CARTESIAN_POINT('',(5.,-11.,9.)); +#10764 = DIRECTION('',(0.,-1.,0.)); +#10765 = DIRECTION('',(0.,0.,-1.)); +#10766 = ADVANCED_FACE('',(#10767),#10793,.T.); +#10767 = FACE_BOUND('',#10768,.T.); +#10768 = EDGE_LOOP('',(#10769,#10770,#10778,#10786,#10792)); +#10769 = ORIENTED_EDGE('',*,*,#10425,.F.); +#10770 = ORIENTED_EDGE('',*,*,#10771,.T.); +#10771 = EDGE_CURVE('',#10426,#10772,#10774,.T.); +#10772 = VERTEX_POINT('',#10773); +#10773 = CARTESIAN_POINT('',(-5.,-12.,9.)); +#10774 = LINE('',#10775,#10776); +#10775 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#10776 = VECTOR('',#10777,1.); +#10777 = DIRECTION('',(0.,0.,1.)); +#10778 = ORIENTED_EDGE('',*,*,#10779,.T.); +#10779 = EDGE_CURVE('',#10772,#10780,#10782,.T.); +#10780 = VERTEX_POINT('',#10781); +#10781 = CARTESIAN_POINT('',(-5.,-11.,9.)); +#10782 = LINE('',#10783,#10784); +#10783 = CARTESIAN_POINT('',(-5.,-12.,9.)); +#10784 = VECTOR('',#10785,1.); +#10785 = DIRECTION('',(0.,1.,0.)); +#10786 = ORIENTED_EDGE('',*,*,#10787,.T.); +#10787 = EDGE_CURVE('',#10780,#10723,#10788,.T.); +#10788 = LINE('',#10789,#10790); +#10789 = CARTESIAN_POINT('',(-5.,-11.,9.)); +#10790 = VECTOR('',#10791,1.); +#10791 = DIRECTION('',(-0.,-0.,-1.)); +#10792 = ORIENTED_EDGE('',*,*,#10722,.F.); +#10793 = PLANE('',#10794); +#10794 = AXIS2_PLACEMENT_3D('',#10795,#10796,#10797); +#10795 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#10796 = DIRECTION('',(-1.,0.,0.)); +#10797 = DIRECTION('',(0.,1.,0.)); +#10798 = ADVANCED_FACE('',(#10799),#10825,.T.); +#10799 = FACE_BOUND('',#10800,.T.); +#10800 = EDGE_LOOP('',(#10801,#10802,#10803,#10811,#10819)); +#10801 = ORIENTED_EDGE('',*,*,#10441,.F.); +#10802 = ORIENTED_EDGE('',*,*,#10746,.F.); +#10803 = ORIENTED_EDGE('',*,*,#10804,.F.); +#10804 = EDGE_CURVE('',#10805,#10747,#10807,.T.); +#10805 = VERTEX_POINT('',#10806); +#10806 = CARTESIAN_POINT('',(5.,-11.,9.)); +#10807 = LINE('',#10808,#10809); +#10808 = CARTESIAN_POINT('',(5.,-11.,9.)); +#10809 = VECTOR('',#10810,1.); +#10810 = DIRECTION('',(-0.,-0.,-1.)); +#10811 = ORIENTED_EDGE('',*,*,#10812,.T.); +#10812 = EDGE_CURVE('',#10805,#10813,#10815,.T.); +#10813 = VERTEX_POINT('',#10814); +#10814 = CARTESIAN_POINT('',(5.,-12.,9.)); +#10815 = LINE('',#10816,#10817); +#10816 = CARTESIAN_POINT('',(5.,1.,9.)); +#10817 = VECTOR('',#10818,1.); +#10818 = DIRECTION('',(0.,-1.,0.)); +#10819 = ORIENTED_EDGE('',*,*,#10820,.F.); +#10820 = EDGE_CURVE('',#10434,#10813,#10821,.T.); +#10821 = LINE('',#10822,#10823); +#10822 = CARTESIAN_POINT('',(5.,-12.,0.)); +#10823 = VECTOR('',#10824,1.); +#10824 = DIRECTION('',(0.,0.,1.)); +#10825 = PLANE('',#10826); +#10826 = AXIS2_PLACEMENT_3D('',#10827,#10828,#10829); +#10827 = CARTESIAN_POINT('',(5.,1.,0.)); +#10828 = DIRECTION('',(1.,0.,0.)); +#10829 = DIRECTION('',(0.,-1.,0.)); +#10830 = ADVANCED_FACE('',(#10831,#10842),#10853,.T.); +#10831 = FACE_BOUND('',#10832,.T.); +#10832 = EDGE_LOOP('',(#10833,#10834,#10840,#10841)); +#10833 = ORIENTED_EDGE('',*,*,#10820,.T.); +#10834 = ORIENTED_EDGE('',*,*,#10835,.T.); +#10835 = EDGE_CURVE('',#10813,#10772,#10836,.T.); +#10836 = LINE('',#10837,#10838); +#10837 = CARTESIAN_POINT('',(5.,-12.,9.)); +#10838 = VECTOR('',#10839,1.); +#10839 = DIRECTION('',(-1.,0.,0.)); +#10840 = ORIENTED_EDGE('',*,*,#10771,.F.); +#10841 = ORIENTED_EDGE('',*,*,#10433,.F.); +#10842 = FACE_BOUND('',#10843,.T.); +#10843 = EDGE_LOOP('',(#10844)); +#10844 = ORIENTED_EDGE('',*,*,#10845,.F.); +#10845 = EDGE_CURVE('',#10846,#10846,#10848,.T.); +#10846 = VERTEX_POINT('',#10847); +#10847 = CARTESIAN_POINT('',(3.25,-12.,5.)); +#10848 = CIRCLE('',#10849,3.25); +#10849 = AXIS2_PLACEMENT_3D('',#10850,#10851,#10852); +#10850 = CARTESIAN_POINT('',(0.,-12.,5.)); +#10851 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#10852 = DIRECTION('',(1.,0.,0.)); +#10853 = PLANE('',#10854); +#10854 = AXIS2_PLACEMENT_3D('',#10855,#10856,#10857); +#10855 = CARTESIAN_POINT('',(5.,-12.,0.)); +#10856 = DIRECTION('',(0.,-1.,0.)); +#10857 = DIRECTION('',(-1.,0.,0.)); +#10858 = ADVANCED_FACE('',(#10859),#10884,.T.); +#10859 = FACE_BOUND('',#10860,.T.); +#10860 = EDGE_LOOP('',(#10861,#10869,#10877,#10883)); +#10861 = ORIENTED_EDGE('',*,*,#10862,.F.); +#10862 = EDGE_CURVE('',#10863,#10475,#10865,.T.); +#10863 = VERTEX_POINT('',#10864); +#10864 = CARTESIAN_POINT('',(1.25,-0.15,-2.3)); +#10865 = LINE('',#10866,#10867); +#10866 = CARTESIAN_POINT('',(1.25,-0.15,-3.)); +#10867 = VECTOR('',#10868,1.); +#10868 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#10869 = ORIENTED_EDGE('',*,*,#10870,.T.); +#10870 = EDGE_CURVE('',#10863,#10871,#10873,.T.); +#10871 = VERTEX_POINT('',#10872); +#10872 = CARTESIAN_POINT('',(1.25,0.15,-2.3)); +#10873 = LINE('',#10874,#10875); +#10874 = CARTESIAN_POINT('',(1.25,-0.15,-2.3)); +#10875 = VECTOR('',#10876,1.); +#10876 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#10877 = ORIENTED_EDGE('',*,*,#10878,.T.); +#10878 = EDGE_CURVE('',#10871,#10477,#10879,.T.); +#10879 = LINE('',#10880,#10881); +#10880 = CARTESIAN_POINT('',(1.25,0.15,-3.)); +#10881 = VECTOR('',#10882,1.); +#10882 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#10883 = ORIENTED_EDGE('',*,*,#10474,.F.); +#10884 = PLANE('',#10885); +#10885 = AXIS2_PLACEMENT_3D('',#10886,#10887,#10888); +#10886 = CARTESIAN_POINT('',(1.25,-0.15,-3.)); +#10887 = DIRECTION('',(1.,0.,0.)); +#10888 = DIRECTION('',(-0.,3.330669073875E-16,1.)); +#10889 = ADVANCED_FACE('',(#10890),#10924,.T.); +#10890 = FACE_BOUND('',#10891,.T.); +#10891 = EDGE_LOOP('',(#10892,#10902,#10910,#10916,#10917,#10918)); +#10892 = ORIENTED_EDGE('',*,*,#10893,.F.); +#10893 = EDGE_CURVE('',#10894,#10896,#10898,.T.); +#10894 = VERTEX_POINT('',#10895); +#10895 = CARTESIAN_POINT('',(-0.55,0.15,-3.)); +#10896 = VERTEX_POINT('',#10897); +#10897 = CARTESIAN_POINT('',(0.55,0.15,-3.)); +#10898 = LINE('',#10899,#10900); +#10899 = CARTESIAN_POINT('',(-1.25,0.15,-3.)); +#10900 = VECTOR('',#10901,1.); +#10901 = DIRECTION('',(1.,0.,0.)); +#10902 = ORIENTED_EDGE('',*,*,#10903,.T.); +#10903 = EDGE_CURVE('',#10894,#10904,#10906,.T.); +#10904 = VERTEX_POINT('',#10905); +#10905 = CARTESIAN_POINT('',(-1.25,0.15,-2.3)); +#10906 = LINE('',#10907,#10908); +#10907 = CARTESIAN_POINT('',(-0.9,0.15,-2.65)); +#10908 = VECTOR('',#10909,1.); +#10909 = DIRECTION('',(-0.707106781187,2.355138688024E-16,0.707106781187 + )); +#10910 = ORIENTED_EDGE('',*,*,#10911,.F.); +#10911 = EDGE_CURVE('',#10493,#10904,#10912,.T.); +#10912 = LINE('',#10913,#10914); +#10913 = CARTESIAN_POINT('',(-1.25,0.15,-9.992007221626E-17)); +#10914 = VECTOR('',#10915,1.); +#10915 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#10916 = ORIENTED_EDGE('',*,*,#10500,.F.); +#10917 = ORIENTED_EDGE('',*,*,#10878,.F.); +#10918 = ORIENTED_EDGE('',*,*,#10919,.F.); +#10919 = EDGE_CURVE('',#10896,#10871,#10920,.T.); +#10920 = LINE('',#10921,#10922); +#10921 = CARTESIAN_POINT('',(0.275,0.15,-3.275)); +#10922 = VECTOR('',#10923,1.); +#10923 = DIRECTION('',(0.707106781187,2.355138688024E-16,0.707106781187) + ); +#10924 = PLANE('',#10925); +#10925 = AXIS2_PLACEMENT_3D('',#10926,#10927,#10928); +#10926 = CARTESIAN_POINT('',(-1.25,0.15,-3.)); +#10927 = DIRECTION('',(0.,1.,-3.330669073875E-16)); +#10928 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#10929 = ADVANCED_FACE('',(#10930),#10948,.T.); +#10930 = FACE_BOUND('',#10931,.T.); +#10931 = EDGE_LOOP('',(#10932,#10940,#10941,#10942)); +#10932 = ORIENTED_EDGE('',*,*,#10933,.F.); +#10933 = EDGE_CURVE('',#10485,#10934,#10936,.T.); +#10934 = VERTEX_POINT('',#10935); +#10935 = CARTESIAN_POINT('',(-1.25,-0.15,-2.3)); +#10936 = LINE('',#10937,#10938); +#10937 = CARTESIAN_POINT('',(-1.25,-0.15,0.)); +#10938 = VECTOR('',#10939,1.); +#10939 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#10940 = ORIENTED_EDGE('',*,*,#10492,.T.); +#10941 = ORIENTED_EDGE('',*,*,#10911,.T.); +#10942 = ORIENTED_EDGE('',*,*,#10943,.F.); +#10943 = EDGE_CURVE('',#10934,#10904,#10944,.T.); +#10944 = LINE('',#10945,#10946); +#10945 = CARTESIAN_POINT('',(-1.25,-0.15,-2.3)); +#10946 = VECTOR('',#10947,1.); +#10947 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#10948 = PLANE('',#10949); +#10949 = AXIS2_PLACEMENT_3D('',#10950,#10951,#10952); +#10950 = CARTESIAN_POINT('',(-1.25,-0.15,0.)); +#10951 = DIRECTION('',(-1.,0.,0.)); +#10952 = DIRECTION('',(-0.,-3.330669073875E-16,-1.)); +#10953 = ADVANCED_FACE('',(#10954),#10981,.F.); +#10954 = FACE_BOUND('',#10955,.F.); +#10955 = EDGE_LOOP('',(#10956,#10966,#10972,#10973,#10974,#10975)); +#10956 = ORIENTED_EDGE('',*,*,#10957,.F.); +#10957 = EDGE_CURVE('',#10958,#10960,#10962,.T.); +#10958 = VERTEX_POINT('',#10959); +#10959 = CARTESIAN_POINT('',(-0.55,-0.15,-3.)); +#10960 = VERTEX_POINT('',#10961); +#10961 = CARTESIAN_POINT('',(0.55,-0.15,-3.)); +#10962 = LINE('',#10963,#10964); +#10963 = CARTESIAN_POINT('',(-1.25,-0.15,-3.)); +#10964 = VECTOR('',#10965,1.); +#10965 = DIRECTION('',(1.,0.,0.)); +#10966 = ORIENTED_EDGE('',*,*,#10967,.T.); +#10967 = EDGE_CURVE('',#10958,#10934,#10968,.T.); +#10968 = LINE('',#10969,#10970); +#10969 = CARTESIAN_POINT('',(-0.9,-0.15,-2.65)); +#10970 = VECTOR('',#10971,1.); +#10971 = DIRECTION('',(-0.707106781187,2.355138688024E-16,0.707106781187 + )); +#10972 = ORIENTED_EDGE('',*,*,#10933,.F.); +#10973 = ORIENTED_EDGE('',*,*,#10484,.F.); +#10974 = ORIENTED_EDGE('',*,*,#10862,.F.); +#10975 = ORIENTED_EDGE('',*,*,#10976,.F.); +#10976 = EDGE_CURVE('',#10960,#10863,#10977,.T.); +#10977 = LINE('',#10978,#10979); +#10978 = CARTESIAN_POINT('',(0.275,-0.15,-3.275)); +#10979 = VECTOR('',#10980,1.); +#10980 = DIRECTION('',(0.707106781187,2.355138688024E-16,0.707106781187) + ); +#10981 = PLANE('',#10982); +#10982 = AXIS2_PLACEMENT_3D('',#10983,#10984,#10985); +#10983 = CARTESIAN_POINT('',(-1.25,-0.15,-3.)); +#10984 = DIRECTION('',(0.,1.,-3.330669073875E-16)); +#10985 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#10986 = ADVANCED_FACE('',(#10987),#11012,.T.); +#10987 = FACE_BOUND('',#10988,.T.); +#10988 = EDGE_LOOP('',(#10989,#10997,#11005,#11011)); +#10989 = ORIENTED_EDGE('',*,*,#10990,.F.); +#10990 = EDGE_CURVE('',#10991,#10509,#10993,.T.); +#10991 = VERTEX_POINT('',#10992); +#10992 = CARTESIAN_POINT('',(0.9,-6.15,-2.5)); +#10993 = LINE('',#10994,#10995); +#10994 = CARTESIAN_POINT('',(0.9,-6.15,-3.)); +#10995 = VECTOR('',#10996,1.); +#10996 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#10997 = ORIENTED_EDGE('',*,*,#10998,.T.); +#10998 = EDGE_CURVE('',#10991,#10999,#11001,.T.); +#10999 = VERTEX_POINT('',#11000); +#11000 = CARTESIAN_POINT('',(0.9,-5.85,-2.5)); +#11001 = LINE('',#11002,#11003); +#11002 = CARTESIAN_POINT('',(0.9,-6.15,-2.5)); +#11003 = VECTOR('',#11004,1.); +#11004 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#11005 = ORIENTED_EDGE('',*,*,#11006,.T.); +#11006 = EDGE_CURVE('',#10999,#10511,#11007,.T.); +#11007 = LINE('',#11008,#11009); +#11008 = CARTESIAN_POINT('',(0.9,-5.85,-3.)); +#11009 = VECTOR('',#11010,1.); +#11010 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#11011 = ORIENTED_EDGE('',*,*,#10508,.F.); +#11012 = PLANE('',#11013); +#11013 = AXIS2_PLACEMENT_3D('',#11014,#11015,#11016); +#11014 = CARTESIAN_POINT('',(0.9,-6.15,-3.)); +#11015 = DIRECTION('',(1.,0.,0.)); +#11016 = DIRECTION('',(-0.,3.330669073875E-16,1.)); +#11017 = ADVANCED_FACE('',(#11018),#11052,.T.); +#11018 = FACE_BOUND('',#11019,.T.); +#11019 = EDGE_LOOP('',(#11020,#11030,#11038,#11044,#11045,#11046)); +#11020 = ORIENTED_EDGE('',*,*,#11021,.F.); +#11021 = EDGE_CURVE('',#11022,#11024,#11026,.T.); +#11022 = VERTEX_POINT('',#11023); +#11023 = CARTESIAN_POINT('',(-0.4,-5.85,-3.)); +#11024 = VERTEX_POINT('',#11025); +#11025 = CARTESIAN_POINT('',(0.4,-5.85,-3.)); +#11026 = LINE('',#11027,#11028); +#11027 = CARTESIAN_POINT('',(-0.9,-5.85,-3.)); +#11028 = VECTOR('',#11029,1.); +#11029 = DIRECTION('',(1.,0.,0.)); +#11030 = ORIENTED_EDGE('',*,*,#11031,.T.); +#11031 = EDGE_CURVE('',#11022,#11032,#11034,.T.); +#11032 = VERTEX_POINT('',#11033); +#11033 = CARTESIAN_POINT('',(-0.9,-5.85,-2.5)); +#11034 = LINE('',#11035,#11036); +#11035 = CARTESIAN_POINT('',(-0.65,-5.85,-2.75)); +#11036 = VECTOR('',#11037,1.); +#11037 = DIRECTION('',(-0.707106781187,2.878502840918E-16,0.707106781187 + )); +#11038 = ORIENTED_EDGE('',*,*,#11039,.F.); +#11039 = EDGE_CURVE('',#10527,#11032,#11040,.T.); +#11040 = LINE('',#11041,#11042); +#11041 = CARTESIAN_POINT('',(-0.9,-5.85,-9.992007221626E-17)); +#11042 = VECTOR('',#11043,1.); +#11043 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#11044 = ORIENTED_EDGE('',*,*,#10534,.F.); +#11045 = ORIENTED_EDGE('',*,*,#11006,.F.); +#11046 = ORIENTED_EDGE('',*,*,#11047,.F.); +#11047 = EDGE_CURVE('',#11024,#10999,#11048,.T.); +#11048 = LINE('',#11049,#11050); +#11049 = CARTESIAN_POINT('',(0.2,-5.85,-3.2)); +#11050 = VECTOR('',#11051,1.); +#11051 = DIRECTION('',(0.707106781187,2.878502840918E-16,0.707106781187) + ); +#11052 = PLANE('',#11053); +#11053 = AXIS2_PLACEMENT_3D('',#11054,#11055,#11056); +#11054 = CARTESIAN_POINT('',(-0.9,-5.85,-3.)); +#11055 = DIRECTION('',(0.,1.,-4.070817756959E-16)); +#11056 = DIRECTION('',(0.,4.070817756959E-16,1.)); +#11057 = ADVANCED_FACE('',(#11058),#11076,.T.); +#11058 = FACE_BOUND('',#11059,.T.); +#11059 = EDGE_LOOP('',(#11060,#11068,#11069,#11070)); +#11060 = ORIENTED_EDGE('',*,*,#11061,.F.); +#11061 = EDGE_CURVE('',#10519,#11062,#11064,.T.); +#11062 = VERTEX_POINT('',#11063); +#11063 = CARTESIAN_POINT('',(-0.9,-6.15,-2.5)); +#11064 = LINE('',#11065,#11066); +#11065 = CARTESIAN_POINT('',(-0.9,-6.15,0.)); +#11066 = VECTOR('',#11067,1.); +#11067 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#11068 = ORIENTED_EDGE('',*,*,#10526,.T.); +#11069 = ORIENTED_EDGE('',*,*,#11039,.T.); +#11070 = ORIENTED_EDGE('',*,*,#11071,.F.); +#11071 = EDGE_CURVE('',#11062,#11032,#11072,.T.); +#11072 = LINE('',#11073,#11074); +#11073 = CARTESIAN_POINT('',(-0.9,-6.15,-2.5)); +#11074 = VECTOR('',#11075,1.); +#11075 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#11076 = PLANE('',#11077); +#11077 = AXIS2_PLACEMENT_3D('',#11078,#11079,#11080); +#11078 = CARTESIAN_POINT('',(-0.9,-6.15,0.)); +#11079 = DIRECTION('',(-1.,0.,0.)); +#11080 = DIRECTION('',(-0.,-3.330669073875E-16,-1.)); +#11081 = ADVANCED_FACE('',(#11082),#11109,.F.); +#11082 = FACE_BOUND('',#11083,.F.); +#11083 = EDGE_LOOP('',(#11084,#11094,#11100,#11101,#11102,#11103)); +#11084 = ORIENTED_EDGE('',*,*,#11085,.F.); +#11085 = EDGE_CURVE('',#11086,#11088,#11090,.T.); +#11086 = VERTEX_POINT('',#11087); +#11087 = CARTESIAN_POINT('',(-0.4,-6.15,-3.)); +#11088 = VERTEX_POINT('',#11089); +#11089 = CARTESIAN_POINT('',(0.4,-6.15,-3.)); +#11090 = LINE('',#11091,#11092); +#11091 = CARTESIAN_POINT('',(-0.9,-6.15,-3.)); +#11092 = VECTOR('',#11093,1.); +#11093 = DIRECTION('',(1.,0.,0.)); +#11094 = ORIENTED_EDGE('',*,*,#11095,.T.); +#11095 = EDGE_CURVE('',#11086,#11062,#11096,.T.); +#11096 = LINE('',#11097,#11098); +#11097 = CARTESIAN_POINT('',(-0.65,-6.15,-2.75)); +#11098 = VECTOR('',#11099,1.); +#11099 = DIRECTION('',(-0.707106781187,2.878502840918E-16,0.707106781187 + )); +#11100 = ORIENTED_EDGE('',*,*,#11061,.F.); +#11101 = ORIENTED_EDGE('',*,*,#10518,.F.); +#11102 = ORIENTED_EDGE('',*,*,#10990,.F.); +#11103 = ORIENTED_EDGE('',*,*,#11104,.F.); +#11104 = EDGE_CURVE('',#11088,#10991,#11105,.T.); +#11105 = LINE('',#11106,#11107); +#11106 = CARTESIAN_POINT('',(0.2,-6.15,-3.2)); +#11107 = VECTOR('',#11108,1.); +#11108 = DIRECTION('',(0.707106781187,2.878502840918E-16,0.707106781187) + ); +#11109 = PLANE('',#11110); +#11110 = AXIS2_PLACEMENT_3D('',#11111,#11112,#11113); +#11111 = CARTESIAN_POINT('',(-0.9,-6.15,-3.)); +#11112 = DIRECTION('',(0.,1.,-4.070817756959E-16)); +#11113 = DIRECTION('',(0.,4.070817756959E-16,1.)); +#11114 = ADVANCED_FACE('',(#11115),#11134,.T.); +#11115 = FACE_BOUND('',#11116,.T.); +#11116 = EDGE_LOOP('',(#11117,#11118,#11126,#11133)); +#11117 = ORIENTED_EDGE('',*,*,#10542,.F.); +#11118 = ORIENTED_EDGE('',*,*,#11119,.T.); +#11119 = EDGE_CURVE('',#10543,#11120,#11122,.T.); +#11120 = VERTEX_POINT('',#11121); +#11121 = CARTESIAN_POINT('',(0.75,-9.,-1.8)); +#11122 = LINE('',#11123,#11124); +#11123 = CARTESIAN_POINT('',(0.75,-9.,0.)); +#11124 = VECTOR('',#11125,1.); +#11125 = DIRECTION('',(-0.,-0.,-1.)); +#11126 = ORIENTED_EDGE('',*,*,#11127,.T.); +#11127 = EDGE_CURVE('',#11120,#11120,#11128,.T.); +#11128 = CIRCLE('',#11129,0.75); +#11129 = AXIS2_PLACEMENT_3D('',#11130,#11131,#11132); +#11130 = CARTESIAN_POINT('',(0.,-9.,-1.8)); +#11131 = DIRECTION('',(0.,0.,1.)); +#11132 = DIRECTION('',(1.,0.,-0.)); +#11133 = ORIENTED_EDGE('',*,*,#11119,.F.); +#11134 = CYLINDRICAL_SURFACE('',#11135,0.75); +#11135 = AXIS2_PLACEMENT_3D('',#11136,#11137,#11138); +#11136 = CARTESIAN_POINT('',(0.,-9.,0.)); +#11137 = DIRECTION('',(0.,0.,1.)); +#11138 = DIRECTION('',(1.,0.,-0.)); +#11139 = ADVANCED_FACE('',(#11140),#11151,.T.); +#11140 = FACE_BOUND('',#11141,.T.); +#11141 = EDGE_LOOP('',(#11142,#11143,#11144,#11150)); +#11142 = ORIENTED_EDGE('',*,*,#10569,.F.); +#11143 = ORIENTED_EDGE('',*,*,#10618,.T.); +#11144 = ORIENTED_EDGE('',*,*,#11145,.T.); +#11145 = EDGE_CURVE('',#10594,#10636,#11146,.T.); +#11146 = LINE('',#11147,#11148); +#11147 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#11148 = VECTOR('',#11149,1.); +#11149 = DIRECTION('',(1.,0.,0.)); +#11150 = ORIENTED_EDGE('',*,*,#10659,.T.); +#11151 = PLANE('',#11152); +#11152 = AXIS2_PLACEMENT_3D('',#11153,#11154,#11155); +#11153 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#11154 = DIRECTION('',(0.,-1.,0.)); +#11155 = DIRECTION('',(1.,0.,0.)); +#11156 = ADVANCED_FACE('',(#11157),#11168,.T.); +#11157 = FACE_BOUND('',#11158,.T.); +#11158 = EDGE_LOOP('',(#11159,#11160,#11161,#11167)); +#11159 = ORIENTED_EDGE('',*,*,#11145,.F.); +#11160 = ORIENTED_EDGE('',*,*,#10676,.T.); +#11161 = ORIENTED_EDGE('',*,*,#11162,.F.); +#11162 = EDGE_CURVE('',#10700,#10677,#11163,.T.); +#11163 = LINE('',#11164,#11165); +#11164 = CARTESIAN_POINT('',(5.,-11.,8.5)); +#11165 = VECTOR('',#11166,1.); +#11166 = DIRECTION('',(-1.,0.,0.)); +#11167 = ORIENTED_EDGE('',*,*,#10707,.T.); +#11168 = PLANE('',#11169); +#11169 = AXIS2_PLACEMENT_3D('',#11170,#11171,#11172); +#11170 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#11171 = DIRECTION('',(0.,0.,1.)); +#11172 = DIRECTION('',(1.,0.,-0.)); +#11173 = ADVANCED_FACE('',(#11174),#11192,.F.); +#11174 = FACE_BOUND('',#11175,.F.); +#11175 = EDGE_LOOP('',(#11176,#11177,#11178,#11186)); +#11176 = ORIENTED_EDGE('',*,*,#10787,.T.); +#11177 = ORIENTED_EDGE('',*,*,#10732,.F.); +#11178 = ORIENTED_EDGE('',*,*,#11179,.T.); +#11179 = EDGE_CURVE('',#10677,#11180,#11182,.T.); +#11180 = VERTEX_POINT('',#11181); +#11181 = CARTESIAN_POINT('',(-4.5,-11.,9.)); +#11182 = LINE('',#11183,#11184); +#11183 = CARTESIAN_POINT('',(-4.5,-11.,0.)); +#11184 = VECTOR('',#11185,1.); +#11185 = DIRECTION('',(0.,0.,1.)); +#11186 = ORIENTED_EDGE('',*,*,#11187,.F.); +#11187 = EDGE_CURVE('',#10780,#11180,#11188,.T.); +#11188 = LINE('',#11189,#11190); +#11189 = CARTESIAN_POINT('',(-5.,-11.,9.)); +#11190 = VECTOR('',#11191,1.); +#11191 = DIRECTION('',(1.,0.,0.)); +#11192 = PLANE('',#11193); +#11193 = AXIS2_PLACEMENT_3D('',#11194,#11195,#11196); +#11194 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#11195 = DIRECTION('',(0.,-1.,0.)); +#11196 = DIRECTION('',(0.,0.,1.)); +#11197 = ADVANCED_FACE('',(#11198),#11216,.F.); +#11198 = FACE_BOUND('',#11199,.F.); +#11199 = EDGE_LOOP('',(#11200,#11201,#11209,#11215)); +#11200 = ORIENTED_EDGE('',*,*,#10804,.F.); +#11201 = ORIENTED_EDGE('',*,*,#11202,.T.); +#11202 = EDGE_CURVE('',#10805,#11203,#11205,.T.); +#11203 = VERTEX_POINT('',#11204); +#11204 = CARTESIAN_POINT('',(4.5,-11.,9.)); +#11205 = LINE('',#11206,#11207); +#11206 = CARTESIAN_POINT('',(5.,-11.,9.)); +#11207 = VECTOR('',#11208,1.); +#11208 = DIRECTION('',(-1.,-0.,-0.)); +#11209 = ORIENTED_EDGE('',*,*,#11210,.T.); +#11210 = EDGE_CURVE('',#11203,#10700,#11211,.T.); +#11211 = LINE('',#11212,#11213); +#11212 = CARTESIAN_POINT('',(4.5,-11.,9.)); +#11213 = VECTOR('',#11214,1.); +#11214 = DIRECTION('',(0.,0.,-1.)); +#11215 = ORIENTED_EDGE('',*,*,#10754,.F.); +#11216 = PLANE('',#11217); +#11217 = AXIS2_PLACEMENT_3D('',#11218,#11219,#11220); +#11218 = CARTESIAN_POINT('',(5.,-11.,9.)); +#11219 = DIRECTION('',(0.,-1.,0.)); +#11220 = DIRECTION('',(0.,0.,-1.)); +#11221 = ADVANCED_FACE('',(#11222),#11235,.T.); +#11222 = FACE_BOUND('',#11223,.T.); +#11223 = EDGE_LOOP('',(#11224,#11230,#11231,#11232,#11233,#11234)); +#11224 = ORIENTED_EDGE('',*,*,#11225,.T.); +#11225 = EDGE_CURVE('',#11203,#11180,#11226,.T.); +#11226 = LINE('',#11227,#11228); +#11227 = CARTESIAN_POINT('',(5.,-11.,9.)); +#11228 = VECTOR('',#11229,1.); +#11229 = DIRECTION('',(-1.,0.,0.)); +#11230 = ORIENTED_EDGE('',*,*,#11187,.F.); +#11231 = ORIENTED_EDGE('',*,*,#10779,.F.); +#11232 = ORIENTED_EDGE('',*,*,#10835,.F.); +#11233 = ORIENTED_EDGE('',*,*,#10812,.F.); +#11234 = ORIENTED_EDGE('',*,*,#11202,.T.); +#11235 = PLANE('',#11236); +#11236 = AXIS2_PLACEMENT_3D('',#11237,#11238,#11239); +#11237 = CARTESIAN_POINT('',(-5.,1.,9.)); +#11238 = DIRECTION('',(0.,0.,1.)); +#11239 = DIRECTION('',(1.,0.,-0.)); +#11240 = ADVANCED_FACE('',(#11241),#11260,.F.); +#11241 = FACE_BOUND('',#11242,.F.); +#11242 = EDGE_LOOP('',(#11243,#11244,#11252,#11259)); +#11243 = ORIENTED_EDGE('',*,*,#10845,.F.); +#11244 = ORIENTED_EDGE('',*,*,#11245,.T.); +#11245 = EDGE_CURVE('',#10846,#11246,#11248,.T.); +#11246 = VERTEX_POINT('',#11247); +#11247 = CARTESIAN_POINT('',(3.25,-3.15,5.)); +#11248 = LINE('',#11249,#11250); +#11249 = CARTESIAN_POINT('',(3.25,-12.,5.)); +#11250 = VECTOR('',#11251,1.); +#11251 = DIRECTION('',(0.,1.,-2.22044604925E-16)); +#11252 = ORIENTED_EDGE('',*,*,#11253,.T.); +#11253 = EDGE_CURVE('',#11246,#11246,#11254,.T.); +#11254 = CIRCLE('',#11255,3.25); +#11255 = AXIS2_PLACEMENT_3D('',#11256,#11257,#11258); +#11256 = CARTESIAN_POINT('',(0.,-3.15,5.)); +#11257 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#11258 = DIRECTION('',(1.,0.,0.)); +#11259 = ORIENTED_EDGE('',*,*,#11245,.F.); +#11260 = CYLINDRICAL_SURFACE('',#11261,3.25); +#11261 = AXIS2_PLACEMENT_3D('',#11262,#11263,#11264); +#11262 = CARTESIAN_POINT('',(0.,-12.,5.)); +#11263 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#11264 = DIRECTION('',(1.,0.,0.)); +#11265 = ADVANCED_FACE('',(#11266),#11277,.T.); +#11266 = FACE_BOUND('',#11267,.T.); +#11267 = EDGE_LOOP('',(#11268,#11269,#11275,#11276)); +#11268 = ORIENTED_EDGE('',*,*,#10976,.F.); +#11269 = ORIENTED_EDGE('',*,*,#11270,.T.); +#11270 = EDGE_CURVE('',#10960,#10896,#11271,.T.); +#11271 = LINE('',#11272,#11273); +#11272 = CARTESIAN_POINT('',(0.55,-0.15,-3.)); +#11273 = VECTOR('',#11274,1.); +#11274 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#11275 = ORIENTED_EDGE('',*,*,#10919,.T.); +#11276 = ORIENTED_EDGE('',*,*,#10870,.F.); +#11277 = PLANE('',#11278); +#11278 = AXIS2_PLACEMENT_3D('',#11279,#11280,#11281); +#11279 = CARTESIAN_POINT('',(0.9,-0.15,-2.65)); +#11280 = DIRECTION('',(0.707106781187,-2.197645501631E-16, + -0.707106781187)); +#11281 = DIRECTION('',(-1.113645000908E-17,1.,-3.219304573785E-16)); +#11282 = ADVANCED_FACE('',(#11283),#11294,.T.); +#11283 = FACE_BOUND('',#11284,.T.); +#11284 = EDGE_LOOP('',(#11285,#11286,#11292,#11293)); +#11285 = ORIENTED_EDGE('',*,*,#10957,.F.); +#11286 = ORIENTED_EDGE('',*,*,#11287,.T.); +#11287 = EDGE_CURVE('',#10958,#10894,#11288,.T.); +#11288 = LINE('',#11289,#11290); +#11289 = CARTESIAN_POINT('',(-0.55,-0.15,-3.)); +#11290 = VECTOR('',#11291,1.); +#11291 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#11292 = ORIENTED_EDGE('',*,*,#10893,.T.); +#11293 = ORIENTED_EDGE('',*,*,#11270,.F.); +#11294 = PLANE('',#11295); +#11295 = AXIS2_PLACEMENT_3D('',#11296,#11297,#11298); +#11296 = CARTESIAN_POINT('',(-1.25,-0.15,-3.)); +#11297 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#11298 = DIRECTION('',(1.,0.,0.)); +#11299 = ADVANCED_FACE('',(#11300),#11306,.T.); +#11300 = FACE_BOUND('',#11301,.F.); +#11301 = EDGE_LOOP('',(#11302,#11303,#11304,#11305)); +#11302 = ORIENTED_EDGE('',*,*,#10967,.F.); +#11303 = ORIENTED_EDGE('',*,*,#11287,.T.); +#11304 = ORIENTED_EDGE('',*,*,#10903,.T.); +#11305 = ORIENTED_EDGE('',*,*,#10943,.F.); +#11306 = PLANE('',#11307); +#11307 = AXIS2_PLACEMENT_3D('',#11308,#11309,#11310); +#11308 = CARTESIAN_POINT('',(-0.9,-0.15,-2.65)); +#11309 = DIRECTION('',(-0.707106781187,-2.197645501631E-16, + -0.707106781187)); +#11310 = DIRECTION('',(-1.113645000908E-17,-1.,3.219304573785E-16)); +#11311 = ADVANCED_FACE('',(#11312),#11323,.T.); +#11312 = FACE_BOUND('',#11313,.T.); +#11313 = EDGE_LOOP('',(#11314,#11315,#11321,#11322)); +#11314 = ORIENTED_EDGE('',*,*,#11104,.F.); +#11315 = ORIENTED_EDGE('',*,*,#11316,.T.); +#11316 = EDGE_CURVE('',#11088,#11024,#11317,.T.); +#11317 = LINE('',#11318,#11319); +#11318 = CARTESIAN_POINT('',(0.4,-6.15,-3.)); +#11319 = VECTOR('',#11320,1.); +#11320 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#11321 = ORIENTED_EDGE('',*,*,#11047,.T.); +#11322 = ORIENTED_EDGE('',*,*,#10998,.F.); +#11323 = PLANE('',#11324); +#11324 = AXIS2_PLACEMENT_3D('',#11325,#11326,#11327); +#11325 = CARTESIAN_POINT('',(0.65,-6.15,-2.75)); +#11326 = DIRECTION('',(0.707106781187,-2.196152214463E-16, + -0.707106781187)); +#11327 = DIRECTION('',(-1.124204135735E-17,1.,-3.218248660302E-16)); +#11328 = ADVANCED_FACE('',(#11329),#11340,.T.); +#11329 = FACE_BOUND('',#11330,.T.); +#11330 = EDGE_LOOP('',(#11331,#11332,#11338,#11339)); +#11331 = ORIENTED_EDGE('',*,*,#11085,.F.); +#11332 = ORIENTED_EDGE('',*,*,#11333,.T.); +#11333 = EDGE_CURVE('',#11086,#11022,#11334,.T.); +#11334 = LINE('',#11335,#11336); +#11335 = CARTESIAN_POINT('',(-0.4,-6.15,-3.)); +#11336 = VECTOR('',#11337,1.); +#11337 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#11338 = ORIENTED_EDGE('',*,*,#11021,.T.); +#11339 = ORIENTED_EDGE('',*,*,#11316,.F.); +#11340 = PLANE('',#11341); +#11341 = AXIS2_PLACEMENT_3D('',#11342,#11343,#11344); +#11342 = CARTESIAN_POINT('',(-0.9,-6.15,-3.)); +#11343 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#11344 = DIRECTION('',(1.,0.,0.)); +#11345 = ADVANCED_FACE('',(#11346),#11352,.T.); +#11346 = FACE_BOUND('',#11347,.F.); +#11347 = EDGE_LOOP('',(#11348,#11349,#11350,#11351)); +#11348 = ORIENTED_EDGE('',*,*,#11095,.F.); +#11349 = ORIENTED_EDGE('',*,*,#11333,.T.); +#11350 = ORIENTED_EDGE('',*,*,#11031,.T.); +#11351 = ORIENTED_EDGE('',*,*,#11071,.F.); +#11352 = PLANE('',#11353); +#11353 = AXIS2_PLACEMENT_3D('',#11354,#11355,#11356); +#11354 = CARTESIAN_POINT('',(-0.65,-6.15,-2.75)); +#11355 = DIRECTION('',(-0.707106781187,-2.196152214463E-16, + -0.707106781187)); +#11356 = DIRECTION('',(-1.124204135735E-17,-1.,3.218248660302E-16)); +#11357 = ADVANCED_FACE('',(#11358),#11361,.T.); +#11358 = FACE_BOUND('',#11359,.F.); +#11359 = EDGE_LOOP('',(#11360)); +#11360 = ORIENTED_EDGE('',*,*,#11127,.T.); +#11361 = PLANE('',#11362); +#11362 = AXIS2_PLACEMENT_3D('',#11363,#11364,#11365); +#11363 = CARTESIAN_POINT('',(0.75,-9.,-1.8)); +#11364 = DIRECTION('',(0.,0.,-1.)); +#11365 = DIRECTION('',(-1.,0.,0.)); +#11366 = ADVANCED_FACE('',(#11367),#11373,.T.); +#11367 = FACE_BOUND('',#11368,.T.); +#11368 = EDGE_LOOP('',(#11369,#11370,#11371,#11372)); +#11369 = ORIENTED_EDGE('',*,*,#11225,.F.); +#11370 = ORIENTED_EDGE('',*,*,#11210,.T.); +#11371 = ORIENTED_EDGE('',*,*,#11162,.T.); +#11372 = ORIENTED_EDGE('',*,*,#11179,.T.); +#11373 = PLANE('',#11374); +#11374 = AXIS2_PLACEMENT_3D('',#11375,#11376,#11377); +#11375 = CARTESIAN_POINT('',(5.,-11.,9.)); +#11376 = DIRECTION('',(0.,1.,0.)); +#11377 = DIRECTION('',(-1.,0.,0.)); +#11378 = ADVANCED_FACE('',(#11379,#11382),#11393,.F.); +#11379 = FACE_BOUND('',#11380,.F.); +#11380 = EDGE_LOOP('',(#11381)); +#11381 = ORIENTED_EDGE('',*,*,#11253,.F.); +#11382 = FACE_BOUND('',#11383,.F.); +#11383 = EDGE_LOOP('',(#11384)); +#11384 = ORIENTED_EDGE('',*,*,#11385,.T.); +#11385 = EDGE_CURVE('',#11386,#11386,#11388,.T.); +#11386 = VERTEX_POINT('',#11387); +#11387 = CARTESIAN_POINT('',(1.,-3.15,5.)); +#11388 = CIRCLE('',#11389,1.); +#11389 = AXIS2_PLACEMENT_3D('',#11390,#11391,#11392); +#11390 = CARTESIAN_POINT('',(0.,-3.15,5.)); +#11391 = DIRECTION('',(0.,-1.,6.661338147751E-16)); +#11392 = DIRECTION('',(1.,0.,0.)); +#11393 = PLANE('',#11394); +#11394 = AXIS2_PLACEMENT_3D('',#11395,#11396,#11397); +#11395 = CARTESIAN_POINT('',(3.25,-3.15,5.)); +#11396 = DIRECTION('',(-1.821904450667E-16,1.,-3.155631075091E-16)); +#11397 = DIRECTION('',(0.,3.155631075091E-16,1.)); +#11398 = ADVANCED_FACE('',(#11399),#11418,.T.); +#11399 = FACE_BOUND('',#11400,.T.); +#11400 = EDGE_LOOP('',(#11401,#11410,#11416,#11417)); +#11401 = ORIENTED_EDGE('',*,*,#11402,.F.); +#11402 = EDGE_CURVE('',#11403,#11403,#11405,.T.); +#11403 = VERTEX_POINT('',#11404); +#11404 = CARTESIAN_POINT('',(1.,-11.,5.)); +#11405 = CIRCLE('',#11406,1.); +#11406 = AXIS2_PLACEMENT_3D('',#11407,#11408,#11409); +#11407 = CARTESIAN_POINT('',(0.,-11.,5.)); +#11408 = DIRECTION('',(0.,-1.,4.440892098501E-16)); +#11409 = DIRECTION('',(1.,-9.860761315262E-32,-2.22044604925E-16)); +#11410 = ORIENTED_EDGE('',*,*,#11411,.T.); +#11411 = EDGE_CURVE('',#11403,#11386,#11412,.T.); +#11412 = LINE('',#11413,#11414); +#11413 = CARTESIAN_POINT('',(1.,-12.,5.)); +#11414 = VECTOR('',#11415,1.); +#11415 = DIRECTION('',(-0.,1.,-4.440892098501E-16)); +#11416 = ORIENTED_EDGE('',*,*,#11385,.T.); +#11417 = ORIENTED_EDGE('',*,*,#11411,.F.); +#11418 = CYLINDRICAL_SURFACE('',#11419,1.); +#11419 = AXIS2_PLACEMENT_3D('',#11420,#11421,#11422); +#11420 = CARTESIAN_POINT('',(0.,-12.,5.)); +#11421 = DIRECTION('',(0.,-1.,6.661338147751E-16)); +#11422 = DIRECTION('',(1.,0.,0.)); +#11423 = ADVANCED_FACE('',(#11424),#11437,.T.); +#11424 = FACE_BOUND('',#11425,.T.); +#11425 = EDGE_LOOP('',(#11426,#11435,#11436)); +#11426 = ORIENTED_EDGE('',*,*,#11427,.F.); +#11427 = EDGE_CURVE('',#11403,#11428,#11430,.T.); +#11428 = VERTEX_POINT('',#11429); +#11429 = CARTESIAN_POINT('',(6.123233995737E-17,-12.,5.)); +#11430 = CIRCLE('',#11431,1.); +#11431 = AXIS2_PLACEMENT_3D('',#11432,#11433,#11434); +#11432 = CARTESIAN_POINT('',(0.,-11.,5.)); +#11433 = DIRECTION('',(-1.110223024625E-15,-4.440892098501E-16,-1.)); +#11434 = DIRECTION('',(1.,-4.930380657631E-31,-1.110223024625E-15)); +#11435 = ORIENTED_EDGE('',*,*,#11402,.T.); +#11436 = ORIENTED_EDGE('',*,*,#11427,.T.); +#11437 = SPHERICAL_SURFACE('',#11438,1.); +#11438 = AXIS2_PLACEMENT_3D('',#11439,#11440,#11441); +#11439 = CARTESIAN_POINT('',(0.,-11.,5.)); +#11440 = DIRECTION('',(0.,-1.,4.440892098501E-16)); +#11441 = DIRECTION('',(1.,-9.860761315262E-32,-2.22044604925E-16)); +#11442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#11446)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#11443,#11444,#11445)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#11443 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#11444 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#11445 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#11446 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#11443, + 'distance_accuracy_value','confusion accuracy'); +#11447 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#11448,#11450); +#11448 = ( REPRESENTATION_RELATIONSHIP('','',#8756,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#11449) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#11449 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87); +#11450 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #11451); +#11451 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('19','J1','',#5,#8751,$); +#11452 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8753)); +#11453 = SHAPE_DEFINITION_REPRESENTATION(#11454,#11460); +#11454 = PRODUCT_DEFINITION_SHAPE('','',#11455); +#11455 = PRODUCT_DEFINITION('design','',#11456,#11459); +#11456 = PRODUCT_DEFINITION_FORMATION('','',#11457); +#11457 = PRODUCT('JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical', + 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical','',(#11458)); +#11458 = PRODUCT_CONTEXT('',#2,'mechanical'); +#11459 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#11460 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#11461),#15656); +#11461 = MANIFOLD_SOLID_BREP('',#11462); +#11462 = CLOSED_SHELL('',(#11463,#11535,#11574,#11598,#11663,#11687, + #11839,#11863,#11928,#11953,#12002,#12019,#12043,#12060,#12230, + #12254,#12520,#12544,#12577,#12601,#12632,#12649,#12682,#12706, + #12737,#12754,#12787,#12811,#12842,#12859,#12892,#12916,#12947, + #12959,#12992,#13009,#13026,#13038,#13186,#13203,#13220,#13237, + #13254,#13271,#13288,#13305,#13322,#13339,#13356,#13373,#13390, + #13407,#13424,#13436,#13453,#13470,#13487,#13504,#13550,#13596, + #13642,#13688,#13719,#13743,#13767,#13784,#13815,#13839,#13863, + #13880,#13911,#13935,#13959,#13976,#14007,#14031,#14055,#14072, + #14135,#14159,#14215,#14232,#14263,#14287,#14311,#14328,#14359, + #14383,#14407,#14424,#14455,#14511,#14535,#14584,#14615,#14639, + #14663,#14680,#14711,#14735,#14759,#14776,#14807,#14831,#14855, + #14872,#14903,#14927,#14951,#14968,#15015,#15046,#15058,#15075, + #15101,#15134,#15165,#15189,#15213,#15230,#15261,#15285,#15309, + #15326,#15343,#15390,#15416,#15433,#15459,#15492,#15504,#15516, + #15528,#15540,#15557,#15574,#15586,#15598,#15610,#15627,#15644)); +#11463 = ADVANCED_FACE('',(#11464),#11530,.T.); +#11464 = FACE_BOUND('',#11465,.T.); +#11465 = EDGE_LOOP('',(#11466,#11476,#11484,#11492,#11500,#11508,#11516, + #11524)); +#11466 = ORIENTED_EDGE('',*,*,#11467,.T.); +#11467 = EDGE_CURVE('',#11468,#11470,#11472,.T.); +#11468 = VERTEX_POINT('',#11469); +#11469 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#11470 = VERTEX_POINT('',#11471); +#11471 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#11472 = LINE('',#11473,#11474); +#11473 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#11474 = VECTOR('',#11475,1.); +#11475 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11476 = ORIENTED_EDGE('',*,*,#11477,.T.); +#11477 = EDGE_CURVE('',#11470,#11478,#11480,.T.); +#11478 = VERTEX_POINT('',#11479); +#11479 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#11480 = LINE('',#11481,#11482); +#11481 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#11482 = VECTOR('',#11483,1.); +#11483 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11484 = ORIENTED_EDGE('',*,*,#11485,.T.); +#11485 = EDGE_CURVE('',#11478,#11486,#11488,.T.); +#11486 = VERTEX_POINT('',#11487); +#11487 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#11488 = LINE('',#11489,#11490); +#11489 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#11490 = VECTOR('',#11491,1.); +#11491 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11492 = ORIENTED_EDGE('',*,*,#11493,.T.); +#11493 = EDGE_CURVE('',#11486,#11494,#11496,.T.); +#11494 = VERTEX_POINT('',#11495); +#11495 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#11496 = LINE('',#11497,#11498); +#11497 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#11498 = VECTOR('',#11499,1.); +#11499 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11500 = ORIENTED_EDGE('',*,*,#11501,.T.); +#11501 = EDGE_CURVE('',#11494,#11502,#11504,.T.); +#11502 = VERTEX_POINT('',#11503); +#11503 = CARTESIAN_POINT('',(9.3,0.5,7.)); +#11504 = LINE('',#11505,#11506); +#11505 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#11506 = VECTOR('',#11507,1.); +#11507 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11508 = ORIENTED_EDGE('',*,*,#11509,.F.); +#11509 = EDGE_CURVE('',#11510,#11502,#11512,.T.); +#11510 = VERTEX_POINT('',#11511); +#11511 = CARTESIAN_POINT('',(9.3,-2.85,7.)); +#11512 = LINE('',#11513,#11514); +#11513 = CARTESIAN_POINT('',(9.3,-2.65,7.)); +#11514 = VECTOR('',#11515,1.); +#11515 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11516 = ORIENTED_EDGE('',*,*,#11517,.F.); +#11517 = EDGE_CURVE('',#11518,#11510,#11520,.T.); +#11518 = VERTEX_POINT('',#11519); +#11519 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#11520 = LINE('',#11521,#11522); +#11521 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#11522 = VECTOR('',#11523,1.); +#11523 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11524 = ORIENTED_EDGE('',*,*,#11525,.F.); +#11525 = EDGE_CURVE('',#11468,#11518,#11526,.T.); +#11526 = LINE('',#11527,#11528); +#11527 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#11528 = VECTOR('',#11529,1.); +#11529 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11530 = PLANE('',#11531); +#11531 = AXIS2_PLACEMENT_3D('',#11532,#11533,#11534); +#11532 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#11533 = DIRECTION('',(0.,0.,1.)); +#11534 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11535 = ADVANCED_FACE('',(#11536),#11569,.T.); +#11536 = FACE_BOUND('',#11537,.T.); +#11537 = EDGE_LOOP('',(#11538,#11548,#11556,#11562,#11563)); +#11538 = ORIENTED_EDGE('',*,*,#11539,.T.); +#11539 = EDGE_CURVE('',#11540,#11542,#11544,.T.); +#11540 = VERTEX_POINT('',#11541); +#11541 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#11542 = VERTEX_POINT('',#11543); +#11543 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#11544 = LINE('',#11545,#11546); +#11545 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#11546 = VECTOR('',#11547,1.); +#11547 = DIRECTION('',(-0.,0.,-1.)); +#11548 = ORIENTED_EDGE('',*,*,#11549,.T.); +#11549 = EDGE_CURVE('',#11542,#11550,#11552,.T.); +#11550 = VERTEX_POINT('',#11551); +#11551 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#11552 = LINE('',#11553,#11554); +#11553 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#11554 = VECTOR('',#11555,1.); +#11555 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11556 = ORIENTED_EDGE('',*,*,#11557,.T.); +#11557 = EDGE_CURVE('',#11550,#11470,#11558,.T.); +#11558 = LINE('',#11559,#11560); +#11559 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#11560 = VECTOR('',#11561,1.); +#11561 = DIRECTION('',(0.,0.,1.)); +#11562 = ORIENTED_EDGE('',*,*,#11467,.F.); +#11563 = ORIENTED_EDGE('',*,*,#11564,.T.); +#11564 = EDGE_CURVE('',#11468,#11540,#11565,.T.); +#11565 = LINE('',#11566,#11567); +#11566 = CARTESIAN_POINT('',(2.025,0.5,3.175)); +#11567 = VECTOR('',#11568,1.); +#11568 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#11569 = PLANE('',#11570); +#11570 = AXIS2_PLACEMENT_3D('',#11571,#11572,#11573); +#11571 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#11572 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11573 = DIRECTION('',(0.,-0.,1.)); +#11574 = ADVANCED_FACE('',(#11575),#11593,.F.); +#11575 = FACE_BOUND('',#11576,.T.); +#11576 = EDGE_LOOP('',(#11577,#11578,#11579,#11587)); +#11577 = ORIENTED_EDGE('',*,*,#11564,.F.); +#11578 = ORIENTED_EDGE('',*,*,#11525,.T.); +#11579 = ORIENTED_EDGE('',*,*,#11580,.T.); +#11580 = EDGE_CURVE('',#11518,#11581,#11583,.T.); +#11581 = VERTEX_POINT('',#11582); +#11582 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#11583 = LINE('',#11584,#11585); +#11584 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#11585 = VECTOR('',#11586,1.); +#11586 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#11587 = ORIENTED_EDGE('',*,*,#11588,.F.); +#11588 = EDGE_CURVE('',#11540,#11581,#11589,.T.); +#11589 = LINE('',#11590,#11591); +#11590 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#11591 = VECTOR('',#11592,1.); +#11592 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11593 = PLANE('',#11594); +#11594 = AXIS2_PLACEMENT_3D('',#11595,#11596,#11597); +#11595 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#11596 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#11597 = DIRECTION('',(1.224646799147E-16,1.,-2.105272540809E-29)); +#11598 = ADVANCED_FACE('',(#11599),#11658,.F.); +#11599 = FACE_BOUND('',#11600,.F.); +#11600 = EDGE_LOOP('',(#11601,#11611,#11619,#11627,#11635,#11644,#11650, + #11651,#11652)); +#11601 = ORIENTED_EDGE('',*,*,#11602,.F.); +#11602 = EDGE_CURVE('',#11603,#11605,#11607,.T.); +#11603 = VERTEX_POINT('',#11604); +#11604 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#11605 = VERTEX_POINT('',#11606); +#11606 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#11607 = LINE('',#11608,#11609); +#11608 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#11609 = VECTOR('',#11610,1.); +#11610 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11611 = ORIENTED_EDGE('',*,*,#11612,.T.); +#11612 = EDGE_CURVE('',#11603,#11613,#11615,.T.); +#11613 = VERTEX_POINT('',#11614); +#11614 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#11615 = LINE('',#11616,#11617); +#11616 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#11617 = VECTOR('',#11618,1.); +#11618 = DIRECTION('',(0.,0.,1.)); +#11619 = ORIENTED_EDGE('',*,*,#11620,.T.); +#11620 = EDGE_CURVE('',#11613,#11621,#11623,.T.); +#11621 = VERTEX_POINT('',#11622); +#11622 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#11623 = LINE('',#11624,#11625); +#11624 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#11625 = VECTOR('',#11626,1.); +#11626 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11627 = ORIENTED_EDGE('',*,*,#11628,.T.); +#11628 = EDGE_CURVE('',#11621,#11629,#11631,.T.); +#11629 = VERTEX_POINT('',#11630); +#11630 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#11631 = LINE('',#11632,#11633); +#11632 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#11633 = VECTOR('',#11634,1.); +#11634 = DIRECTION('',(-0.,0.,-1.)); +#11635 = ORIENTED_EDGE('',*,*,#11636,.F.); +#11636 = EDGE_CURVE('',#11637,#11629,#11639,.T.); +#11637 = VERTEX_POINT('',#11638); +#11638 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#11639 = CIRCLE('',#11640,0.5); +#11640 = AXIS2_PLACEMENT_3D('',#11641,#11642,#11643); +#11641 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#11642 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11643 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11644 = ORIENTED_EDGE('',*,*,#11645,.T.); +#11645 = EDGE_CURVE('',#11637,#11550,#11646,.T.); +#11646 = LINE('',#11647,#11648); +#11647 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#11648 = VECTOR('',#11649,1.); +#11649 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11650 = ORIENTED_EDGE('',*,*,#11557,.T.); +#11651 = ORIENTED_EDGE('',*,*,#11477,.T.); +#11652 = ORIENTED_EDGE('',*,*,#11653,.F.); +#11653 = EDGE_CURVE('',#11605,#11478,#11654,.T.); +#11654 = LINE('',#11655,#11656); +#11655 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#11656 = VECTOR('',#11657,1.); +#11657 = DIRECTION('',(0.,0.,1.)); +#11658 = PLANE('',#11659); +#11659 = AXIS2_PLACEMENT_3D('',#11660,#11661,#11662); +#11660 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#11661 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11662 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11663 = ADVANCED_FACE('',(#11664),#11682,.F.); +#11664 = FACE_BOUND('',#11665,.T.); +#11665 = EDGE_LOOP('',(#11666,#11667,#11668,#11676)); +#11666 = ORIENTED_EDGE('',*,*,#11580,.F.); +#11667 = ORIENTED_EDGE('',*,*,#11517,.T.); +#11668 = ORIENTED_EDGE('',*,*,#11669,.T.); +#11669 = EDGE_CURVE('',#11510,#11670,#11672,.T.); +#11670 = VERTEX_POINT('',#11671); +#11671 = CARTESIAN_POINT('',(9.1,-2.65,6.8)); +#11672 = LINE('',#11673,#11674); +#11673 = CARTESIAN_POINT('',(7.383333333333,-0.933333333333, + 5.083333333333)); +#11674 = VECTOR('',#11675,1.); +#11675 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#11676 = ORIENTED_EDGE('',*,*,#11677,.F.); +#11677 = EDGE_CURVE('',#11581,#11670,#11678,.T.); +#11678 = LINE('',#11679,#11680); +#11679 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#11680 = VECTOR('',#11681,1.); +#11681 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11682 = PLANE('',#11683); +#11683 = AXIS2_PLACEMENT_3D('',#11684,#11685,#11686); +#11684 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#11685 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#11686 = DIRECTION('',(-1.,1.224646799147E-16,-2.105272540809E-29)); +#11687 = ADVANCED_FACE('',(#11688),#11834,.F.); +#11688 = FACE_BOUND('',#11689,.F.); +#11689 = EDGE_LOOP('',(#11690,#11698,#11699,#11700,#11708,#11716,#11724, + #11732,#11740,#11748,#11756,#11764,#11772,#11780,#11788,#11796, + #11804,#11812,#11820,#11828)); +#11690 = ORIENTED_EDGE('',*,*,#11691,.F.); +#11691 = EDGE_CURVE('',#11605,#11692,#11694,.T.); +#11692 = VERTEX_POINT('',#11693); +#11693 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#11694 = LINE('',#11695,#11696); +#11695 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#11696 = VECTOR('',#11697,1.); +#11697 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11698 = ORIENTED_EDGE('',*,*,#11653,.T.); +#11699 = ORIENTED_EDGE('',*,*,#11485,.T.); +#11700 = ORIENTED_EDGE('',*,*,#11701,.F.); +#11701 = EDGE_CURVE('',#11702,#11486,#11704,.T.); +#11702 = VERTEX_POINT('',#11703); +#11703 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#11704 = LINE('',#11705,#11706); +#11705 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#11706 = VECTOR('',#11707,1.); +#11707 = DIRECTION('',(0.,0.,1.)); +#11708 = ORIENTED_EDGE('',*,*,#11709,.F.); +#11709 = EDGE_CURVE('',#11710,#11702,#11712,.T.); +#11710 = VERTEX_POINT('',#11711); +#11711 = CARTESIAN_POINT('',(8.25,-3.4,0.)); +#11712 = LINE('',#11713,#11714); +#11713 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#11714 = VECTOR('',#11715,1.); +#11715 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11716 = ORIENTED_EDGE('',*,*,#11717,.F.); +#11717 = EDGE_CURVE('',#11718,#11710,#11720,.T.); +#11718 = VERTEX_POINT('',#11719); +#11719 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#11720 = LINE('',#11721,#11722); +#11721 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#11722 = VECTOR('',#11723,1.); +#11723 = DIRECTION('',(-0.,0.,-1.)); +#11724 = ORIENTED_EDGE('',*,*,#11725,.T.); +#11725 = EDGE_CURVE('',#11718,#11726,#11728,.T.); +#11726 = VERTEX_POINT('',#11727); +#11727 = CARTESIAN_POINT('',(6.75,-3.4,1.)); +#11728 = LINE('',#11729,#11730); +#11729 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#11730 = VECTOR('',#11731,1.); +#11731 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11732 = ORIENTED_EDGE('',*,*,#11733,.T.); +#11733 = EDGE_CURVE('',#11726,#11734,#11736,.T.); +#11734 = VERTEX_POINT('',#11735); +#11735 = CARTESIAN_POINT('',(6.75,-3.4,0.)); +#11736 = LINE('',#11737,#11738); +#11737 = CARTESIAN_POINT('',(6.75,-3.4,1.)); +#11738 = VECTOR('',#11739,1.); +#11739 = DIRECTION('',(-0.,0.,-1.)); +#11740 = ORIENTED_EDGE('',*,*,#11741,.F.); +#11741 = EDGE_CURVE('',#11742,#11734,#11744,.T.); +#11742 = VERTEX_POINT('',#11743); +#11743 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#11744 = LINE('',#11745,#11746); +#11745 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#11746 = VECTOR('',#11747,1.); +#11747 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11748 = ORIENTED_EDGE('',*,*,#11749,.F.); +#11749 = EDGE_CURVE('',#11750,#11742,#11752,.T.); +#11750 = VERTEX_POINT('',#11751); +#11751 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#11752 = LINE('',#11753,#11754); +#11753 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#11754 = VECTOR('',#11755,1.); +#11755 = DIRECTION('',(-0.,0.,-1.)); +#11756 = ORIENTED_EDGE('',*,*,#11757,.T.); +#11757 = EDGE_CURVE('',#11750,#11758,#11760,.T.); +#11758 = VERTEX_POINT('',#11759); +#11759 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#11760 = LINE('',#11761,#11762); +#11761 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#11762 = VECTOR('',#11763,1.); +#11763 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11764 = ORIENTED_EDGE('',*,*,#11765,.T.); +#11765 = EDGE_CURVE('',#11758,#11766,#11768,.T.); +#11766 = VERTEX_POINT('',#11767); +#11767 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#11768 = LINE('',#11769,#11770); +#11769 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#11770 = VECTOR('',#11771,1.); +#11771 = DIRECTION('',(-0.,0.,-1.)); +#11772 = ORIENTED_EDGE('',*,*,#11773,.F.); +#11773 = EDGE_CURVE('',#11774,#11766,#11776,.T.); +#11774 = VERTEX_POINT('',#11775); +#11775 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#11776 = LINE('',#11777,#11778); +#11777 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#11778 = VECTOR('',#11779,1.); +#11779 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11780 = ORIENTED_EDGE('',*,*,#11781,.F.); +#11781 = EDGE_CURVE('',#11782,#11774,#11784,.T.); +#11782 = VERTEX_POINT('',#11783); +#11783 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#11784 = LINE('',#11785,#11786); +#11785 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#11786 = VECTOR('',#11787,1.); +#11787 = DIRECTION('',(-0.,0.,-1.)); +#11788 = ORIENTED_EDGE('',*,*,#11789,.T.); +#11789 = EDGE_CURVE('',#11782,#11790,#11792,.T.); +#11790 = VERTEX_POINT('',#11791); +#11791 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#11792 = LINE('',#11793,#11794); +#11793 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#11794 = VECTOR('',#11795,1.); +#11795 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11796 = ORIENTED_EDGE('',*,*,#11797,.T.); +#11797 = EDGE_CURVE('',#11790,#11798,#11800,.T.); +#11798 = VERTEX_POINT('',#11799); +#11799 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#11800 = LINE('',#11801,#11802); +#11801 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#11802 = VECTOR('',#11803,1.); +#11803 = DIRECTION('',(-0.,0.,-1.)); +#11804 = ORIENTED_EDGE('',*,*,#11805,.F.); +#11805 = EDGE_CURVE('',#11806,#11798,#11808,.T.); +#11806 = VERTEX_POINT('',#11807); +#11807 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#11808 = LINE('',#11809,#11810); +#11809 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#11810 = VECTOR('',#11811,1.); +#11811 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11812 = ORIENTED_EDGE('',*,*,#11813,.F.); +#11813 = EDGE_CURVE('',#11814,#11806,#11816,.T.); +#11814 = VERTEX_POINT('',#11815); +#11815 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#11816 = LINE('',#11817,#11818); +#11817 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#11818 = VECTOR('',#11819,1.); +#11819 = DIRECTION('',(-0.,0.,-1.)); +#11820 = ORIENTED_EDGE('',*,*,#11821,.T.); +#11821 = EDGE_CURVE('',#11814,#11822,#11824,.T.); +#11822 = VERTEX_POINT('',#11823); +#11823 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#11824 = LINE('',#11825,#11826); +#11825 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#11826 = VECTOR('',#11827,1.); +#11827 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11828 = ORIENTED_EDGE('',*,*,#11829,.T.); +#11829 = EDGE_CURVE('',#11822,#11692,#11830,.T.); +#11830 = LINE('',#11831,#11832); +#11831 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#11832 = VECTOR('',#11833,1.); +#11833 = DIRECTION('',(-0.,0.,-1.)); +#11834 = PLANE('',#11835); +#11835 = AXIS2_PLACEMENT_3D('',#11836,#11837,#11838); +#11836 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#11837 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11838 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11839 = ADVANCED_FACE('',(#11840),#11858,.F.); +#11840 = FACE_BOUND('',#11841,.T.); +#11841 = EDGE_LOOP('',(#11842,#11843,#11844,#11852)); +#11842 = ORIENTED_EDGE('',*,*,#11669,.F.); +#11843 = ORIENTED_EDGE('',*,*,#11509,.T.); +#11844 = ORIENTED_EDGE('',*,*,#11845,.T.); +#11845 = EDGE_CURVE('',#11502,#11846,#11848,.T.); +#11846 = VERTEX_POINT('',#11847); +#11847 = CARTESIAN_POINT('',(9.1,0.5,6.8)); +#11848 = LINE('',#11849,#11850); +#11849 = CARTESIAN_POINT('',(8.575,0.5,6.275)); +#11850 = VECTOR('',#11851,1.); +#11851 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#11852 = ORIENTED_EDGE('',*,*,#11853,.F.); +#11853 = EDGE_CURVE('',#11670,#11846,#11854,.T.); +#11854 = LINE('',#11855,#11856); +#11855 = CARTESIAN_POINT('',(9.1,-2.65,6.8)); +#11856 = VECTOR('',#11857,1.); +#11857 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11858 = PLANE('',#11859); +#11859 = AXIS2_PLACEMENT_3D('',#11860,#11861,#11862); +#11860 = CARTESIAN_POINT('',(9.2,-2.65,6.9)); +#11861 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#11862 = DIRECTION('',(-1.224646799147E-16,-1.,-2.105272540809E-29)); +#11863 = ADVANCED_FACE('',(#11864),#11923,.F.); +#11864 = FACE_BOUND('',#11865,.F.); +#11865 = EDGE_LOOP('',(#11866,#11874,#11875,#11876,#11884,#11892,#11901, + #11909,#11917)); +#11866 = ORIENTED_EDGE('',*,*,#11867,.F.); +#11867 = EDGE_CURVE('',#11702,#11868,#11870,.T.); +#11868 = VERTEX_POINT('',#11869); +#11869 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#11870 = LINE('',#11871,#11872); +#11871 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#11872 = VECTOR('',#11873,1.); +#11873 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11874 = ORIENTED_EDGE('',*,*,#11701,.T.); +#11875 = ORIENTED_EDGE('',*,*,#11493,.T.); +#11876 = ORIENTED_EDGE('',*,*,#11877,.F.); +#11877 = EDGE_CURVE('',#11878,#11494,#11880,.T.); +#11878 = VERTEX_POINT('',#11879); +#11879 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#11880 = LINE('',#11881,#11882); +#11881 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#11882 = VECTOR('',#11883,1.); +#11883 = DIRECTION('',(0.,0.,1.)); +#11884 = ORIENTED_EDGE('',*,*,#11885,.F.); +#11885 = EDGE_CURVE('',#11886,#11878,#11888,.T.); +#11886 = VERTEX_POINT('',#11887); +#11887 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#11888 = LINE('',#11889,#11890); +#11889 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#11890 = VECTOR('',#11891,1.); +#11891 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11892 = ORIENTED_EDGE('',*,*,#11893,.F.); +#11893 = EDGE_CURVE('',#11894,#11886,#11896,.T.); +#11894 = VERTEX_POINT('',#11895); +#11895 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#11896 = CIRCLE('',#11897,0.5); +#11897 = AXIS2_PLACEMENT_3D('',#11898,#11899,#11900); +#11898 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#11899 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11900 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11901 = ORIENTED_EDGE('',*,*,#11902,.F.); +#11902 = EDGE_CURVE('',#11903,#11894,#11905,.T.); +#11903 = VERTEX_POINT('',#11904); +#11904 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#11905 = LINE('',#11906,#11907); +#11906 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#11907 = VECTOR('',#11908,1.); +#11908 = DIRECTION('',(-0.,0.,-1.)); +#11909 = ORIENTED_EDGE('',*,*,#11910,.T.); +#11910 = EDGE_CURVE('',#11903,#11911,#11913,.T.); +#11911 = VERTEX_POINT('',#11912); +#11912 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#11913 = LINE('',#11914,#11915); +#11914 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#11915 = VECTOR('',#11916,1.); +#11916 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11917 = ORIENTED_EDGE('',*,*,#11918,.F.); +#11918 = EDGE_CURVE('',#11868,#11911,#11919,.T.); +#11919 = LINE('',#11920,#11921); +#11920 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#11921 = VECTOR('',#11922,1.); +#11922 = DIRECTION('',(0.,0.,1.)); +#11923 = PLANE('',#11924); +#11924 = AXIS2_PLACEMENT_3D('',#11925,#11926,#11927); +#11925 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#11926 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11927 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11928 = ADVANCED_FACE('',(#11929),#11948,.T.); +#11929 = FACE_BOUND('',#11930,.T.); +#11930 = EDGE_LOOP('',(#11931,#11932,#11933,#11941,#11947)); +#11931 = ORIENTED_EDGE('',*,*,#11501,.F.); +#11932 = ORIENTED_EDGE('',*,*,#11877,.F.); +#11933 = ORIENTED_EDGE('',*,*,#11934,.T.); +#11934 = EDGE_CURVE('',#11878,#11935,#11937,.T.); +#11935 = VERTEX_POINT('',#11936); +#11936 = CARTESIAN_POINT('',(9.1,0.5,3.65)); +#11937 = LINE('',#11938,#11939); +#11938 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#11939 = VECTOR('',#11940,1.); +#11940 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#11941 = ORIENTED_EDGE('',*,*,#11942,.T.); +#11942 = EDGE_CURVE('',#11935,#11846,#11943,.T.); +#11943 = LINE('',#11944,#11945); +#11944 = CARTESIAN_POINT('',(9.1,0.5,5.325)); +#11945 = VECTOR('',#11946,1.); +#11946 = DIRECTION('',(0.,0.,1.)); +#11947 = ORIENTED_EDGE('',*,*,#11845,.F.); +#11948 = PLANE('',#11949); +#11949 = AXIS2_PLACEMENT_3D('',#11950,#11951,#11952); +#11950 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#11951 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11952 = DIRECTION('',(0.,-0.,1.)); +#11953 = ADVANCED_FACE('',(#11954),#11997,.F.); +#11954 = FACE_BOUND('',#11955,.F.); +#11955 = EDGE_LOOP('',(#11956,#11957,#11965,#11974,#11982,#11990,#11996) + ); +#11956 = ORIENTED_EDGE('',*,*,#11539,.T.); +#11957 = ORIENTED_EDGE('',*,*,#11958,.T.); +#11958 = EDGE_CURVE('',#11542,#11959,#11961,.T.); +#11959 = VERTEX_POINT('',#11960); +#11960 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#11961 = LINE('',#11962,#11963); +#11962 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#11963 = VECTOR('',#11964,1.); +#11964 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11965 = ORIENTED_EDGE('',*,*,#11966,.T.); +#11966 = EDGE_CURVE('',#11959,#11967,#11969,.T.); +#11967 = VERTEX_POINT('',#11968); +#11968 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#11969 = CIRCLE('',#11970,0.5); +#11970 = AXIS2_PLACEMENT_3D('',#11971,#11972,#11973); +#11971 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#11972 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#11973 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#11974 = ORIENTED_EDGE('',*,*,#11975,.T.); +#11975 = EDGE_CURVE('',#11967,#11976,#11978,.T.); +#11976 = VERTEX_POINT('',#11977); +#11977 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#11978 = LINE('',#11979,#11980); +#11979 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#11980 = VECTOR('',#11981,1.); +#11981 = DIRECTION('',(0.,0.,-1.)); +#11982 = ORIENTED_EDGE('',*,*,#11983,.T.); +#11983 = EDGE_CURVE('',#11976,#11984,#11986,.T.); +#11984 = VERTEX_POINT('',#11985); +#11985 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#11986 = LINE('',#11987,#11988); +#11987 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#11988 = VECTOR('',#11989,1.); +#11989 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#11990 = ORIENTED_EDGE('',*,*,#11991,.F.); +#11991 = EDGE_CURVE('',#11581,#11984,#11992,.T.); +#11992 = LINE('',#11993,#11994); +#11993 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#11994 = VECTOR('',#11995,1.); +#11995 = DIRECTION('',(0.,0.,-1.)); +#11996 = ORIENTED_EDGE('',*,*,#11588,.F.); +#11997 = PLANE('',#11998); +#11998 = AXIS2_PLACEMENT_3D('',#11999,#12000,#12001); +#11999 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#12000 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12001 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12002 = ADVANCED_FACE('',(#12003),#12014,.T.); +#12003 = FACE_BOUND('',#12004,.T.); +#12004 = EDGE_LOOP('',(#12005,#12006,#12012,#12013)); +#12005 = ORIENTED_EDGE('',*,*,#11958,.T.); +#12006 = ORIENTED_EDGE('',*,*,#12007,.T.); +#12007 = EDGE_CURVE('',#11959,#11637,#12008,.T.); +#12008 = LINE('',#12009,#12010); +#12009 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#12010 = VECTOR('',#12011,1.); +#12011 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12012 = ORIENTED_EDGE('',*,*,#11645,.T.); +#12013 = ORIENTED_EDGE('',*,*,#11549,.F.); +#12014 = PLANE('',#12015); +#12015 = AXIS2_PLACEMENT_3D('',#12016,#12017,#12018); +#12016 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#12017 = DIRECTION('',(0.,0.,1.)); +#12018 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12019 = ADVANCED_FACE('',(#12020),#12038,.F.); +#12020 = FACE_BOUND('',#12021,.F.); +#12021 = EDGE_LOOP('',(#12022,#12030,#12031,#12032)); +#12022 = ORIENTED_EDGE('',*,*,#12023,.T.); +#12023 = EDGE_CURVE('',#12024,#11603,#12026,.T.); +#12024 = VERTEX_POINT('',#12025); +#12025 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#12026 = LINE('',#12027,#12028); +#12027 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#12028 = VECTOR('',#12029,1.); +#12029 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12030 = ORIENTED_EDGE('',*,*,#11602,.T.); +#12031 = ORIENTED_EDGE('',*,*,#11691,.T.); +#12032 = ORIENTED_EDGE('',*,*,#12033,.T.); +#12033 = EDGE_CURVE('',#11692,#12024,#12034,.T.); +#12034 = LINE('',#12035,#12036); +#12035 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#12036 = VECTOR('',#12037,1.); +#12037 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12038 = PLANE('',#12039); +#12039 = AXIS2_PLACEMENT_3D('',#12040,#12041,#12042); +#12040 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#12041 = DIRECTION('',(0.,0.,1.)); +#12042 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12043 = ADVANCED_FACE('',(#12044),#12055,.F.); +#12044 = FACE_BOUND('',#12045,.F.); +#12045 = EDGE_LOOP('',(#12046,#12047,#12048,#12054)); +#12046 = ORIENTED_EDGE('',*,*,#12007,.T.); +#12047 = ORIENTED_EDGE('',*,*,#11636,.T.); +#12048 = ORIENTED_EDGE('',*,*,#12049,.F.); +#12049 = EDGE_CURVE('',#11967,#11629,#12050,.T.); +#12050 = LINE('',#12051,#12052); +#12051 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#12052 = VECTOR('',#12053,1.); +#12053 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12054 = ORIENTED_EDGE('',*,*,#11966,.F.); +#12055 = CYLINDRICAL_SURFACE('',#12056,0.5); +#12056 = AXIS2_PLACEMENT_3D('',#12057,#12058,#12059); +#12057 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#12058 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#12059 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12060 = ADVANCED_FACE('',(#12061),#12225,.T.); +#12061 = FACE_BOUND('',#12062,.T.); +#12062 = EDGE_LOOP('',(#12063,#12064,#12072,#12080,#12088,#12096,#12104, + #12113,#12121,#12129,#12137,#12145,#12153,#12162,#12170,#12178, + #12186,#12194,#12200,#12201,#12202,#12203,#12211,#12219)); +#12063 = ORIENTED_EDGE('',*,*,#11902,.F.); +#12064 = ORIENTED_EDGE('',*,*,#12065,.T.); +#12065 = EDGE_CURVE('',#11903,#12066,#12068,.T.); +#12066 = VERTEX_POINT('',#12067); +#12067 = CARTESIAN_POINT('',(8.,1.5,7.)); +#12068 = LINE('',#12069,#12070); +#12069 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#12070 = VECTOR('',#12071,1.); +#12071 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12072 = ORIENTED_EDGE('',*,*,#12073,.T.); +#12073 = EDGE_CURVE('',#12066,#12074,#12076,.T.); +#12074 = VERTEX_POINT('',#12075); +#12075 = CARTESIAN_POINT('',(8.,1.5,6.1)); +#12076 = LINE('',#12077,#12078); +#12077 = CARTESIAN_POINT('',(8.,1.5,5.318198005698)); +#12078 = VECTOR('',#12079,1.); +#12079 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#12080 = ORIENTED_EDGE('',*,*,#12081,.T.); +#12081 = EDGE_CURVE('',#12074,#12082,#12084,.T.); +#12082 = VERTEX_POINT('',#12083); +#12083 = CARTESIAN_POINT('',(7.75,1.5,5.85)); +#12084 = LINE('',#12085,#12086); +#12085 = CARTESIAN_POINT('',(6.421599002849,1.5,4.521599002849)); +#12086 = VECTOR('',#12087,1.); +#12087 = DIRECTION('',(-0.707106781187,1.466048277022E-16, + -0.707106781187)); +#12088 = ORIENTED_EDGE('',*,*,#12089,.T.); +#12089 = EDGE_CURVE('',#12082,#12090,#12092,.T.); +#12090 = VERTEX_POINT('',#12091); +#12091 = CARTESIAN_POINT('',(8.,1.5,5.6)); +#12092 = LINE('',#12093,#12094); +#12093 = CARTESIAN_POINT('',(7.203400997151,1.5,6.396599002849)); +#12094 = VECTOR('',#12095,1.); +#12095 = DIRECTION('',(0.707106781187,-2.658638354479E-17, + -0.707106781187)); +#12096 = ORIENTED_EDGE('',*,*,#12097,.T.); +#12097 = EDGE_CURVE('',#12090,#12098,#12100,.T.); +#12098 = VERTEX_POINT('',#12099); +#12099 = CARTESIAN_POINT('',(8.,1.5,3.85)); +#12100 = LINE('',#12101,#12102); +#12101 = CARTESIAN_POINT('',(8.,1.5,3.818198005698)); +#12102 = VECTOR('',#12103,1.); +#12103 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#12104 = ORIENTED_EDGE('',*,*,#12105,.F.); +#12105 = EDGE_CURVE('',#12106,#12098,#12108,.T.); +#12106 = VERTEX_POINT('',#12107); +#12107 = CARTESIAN_POINT('',(7.25,1.5,3.1)); +#12108 = CIRCLE('',#12109,0.75); +#12109 = AXIS2_PLACEMENT_3D('',#12110,#12111,#12112); +#12110 = CARTESIAN_POINT('',(7.25,1.5,3.85)); +#12111 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12112 = DIRECTION('',(-0.,0.,-1.)); +#12113 = ORIENTED_EDGE('',*,*,#12114,.T.); +#12114 = EDGE_CURVE('',#12106,#12115,#12117,.T.); +#12115 = VERTEX_POINT('',#12116); +#12116 = CARTESIAN_POINT('',(6.5,1.5,3.1)); +#12117 = LINE('',#12118,#12119); +#12118 = CARTESIAN_POINT('',(5.125,1.5,3.1)); +#12119 = VECTOR('',#12120,1.); +#12120 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12121 = ORIENTED_EDGE('',*,*,#12122,.T.); +#12122 = EDGE_CURVE('',#12115,#12123,#12125,.T.); +#12123 = VERTEX_POINT('',#12124); +#12124 = CARTESIAN_POINT('',(6.5,1.5,7.)); +#12125 = LINE('',#12126,#12127); +#12126 = CARTESIAN_POINT('',(6.5,1.5,5.768198005698)); +#12127 = VECTOR('',#12128,1.); +#12128 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#12129 = ORIENTED_EDGE('',*,*,#12130,.T.); +#12130 = EDGE_CURVE('',#12123,#12131,#12133,.T.); +#12131 = VERTEX_POINT('',#12132); +#12132 = CARTESIAN_POINT('',(1.,1.5,7.)); +#12133 = LINE('',#12134,#12135); +#12134 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#12135 = VECTOR('',#12136,1.); +#12136 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12137 = ORIENTED_EDGE('',*,*,#12138,.F.); +#12138 = EDGE_CURVE('',#12139,#12131,#12141,.T.); +#12139 = VERTEX_POINT('',#12140); +#12140 = CARTESIAN_POINT('',(1.,1.5,3.1)); +#12141 = LINE('',#12142,#12143); +#12142 = CARTESIAN_POINT('',(1.,1.5,5.768198005698)); +#12143 = VECTOR('',#12144,1.); +#12144 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#12145 = ORIENTED_EDGE('',*,*,#12146,.F.); +#12146 = EDGE_CURVE('',#12147,#12139,#12149,.T.); +#12147 = VERTEX_POINT('',#12148); +#12148 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#12149 = LINE('',#12150,#12151); +#12150 = CARTESIAN_POINT('',(2.375,1.5,3.1)); +#12151 = VECTOR('',#12152,1.); +#12152 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12153 = ORIENTED_EDGE('',*,*,#12154,.F.); +#12154 = EDGE_CURVE('',#12155,#12147,#12157,.T.); +#12155 = VERTEX_POINT('',#12156); +#12156 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#12157 = CIRCLE('',#12158,0.75); +#12158 = AXIS2_PLACEMENT_3D('',#12159,#12160,#12161); +#12159 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#12160 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12161 = DIRECTION('',(-0.,0.,-1.)); +#12162 = ORIENTED_EDGE('',*,*,#12163,.F.); +#12163 = EDGE_CURVE('',#12164,#12155,#12166,.T.); +#12164 = VERTEX_POINT('',#12165); +#12165 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#12166 = LINE('',#12167,#12168); +#12167 = CARTESIAN_POINT('',(-0.5,1.5,3.818198005698)); +#12168 = VECTOR('',#12169,1.); +#12169 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#12170 = ORIENTED_EDGE('',*,*,#12171,.F.); +#12171 = EDGE_CURVE('',#12172,#12164,#12174,.T.); +#12172 = VERTEX_POINT('',#12173); +#12173 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#12174 = LINE('',#12175,#12176); +#12175 = CARTESIAN_POINT('',(0.296599002849,1.5,6.396599002849)); +#12176 = VECTOR('',#12177,1.); +#12177 = DIRECTION('',(-0.707106781187,1.466048277022E-16, + -0.707106781187)); +#12178 = ORIENTED_EDGE('',*,*,#12179,.F.); +#12179 = EDGE_CURVE('',#12180,#12172,#12182,.T.); +#12180 = VERTEX_POINT('',#12181); +#12181 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#12182 = LINE('',#12183,#12184); +#12183 = CARTESIAN_POINT('',(1.078400997151,1.5,4.521599002849)); +#12184 = VECTOR('',#12185,1.); +#12185 = DIRECTION('',(0.707106781187,-2.658638354479E-17, + -0.707106781187)); +#12186 = ORIENTED_EDGE('',*,*,#12187,.F.); +#12187 = EDGE_CURVE('',#12188,#12180,#12190,.T.); +#12188 = VERTEX_POINT('',#12189); +#12189 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#12190 = LINE('',#12191,#12192); +#12191 = CARTESIAN_POINT('',(-0.5,1.5,5.318198005698)); +#12192 = VECTOR('',#12193,1.); +#12193 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#12194 = ORIENTED_EDGE('',*,*,#12195,.T.); +#12195 = EDGE_CURVE('',#12188,#11621,#12196,.T.); +#12196 = LINE('',#12197,#12198); +#12197 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#12198 = VECTOR('',#12199,1.); +#12199 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12200 = ORIENTED_EDGE('',*,*,#11628,.T.); +#12201 = ORIENTED_EDGE('',*,*,#12049,.F.); +#12202 = ORIENTED_EDGE('',*,*,#11975,.T.); +#12203 = ORIENTED_EDGE('',*,*,#12204,.F.); +#12204 = EDGE_CURVE('',#12205,#11976,#12207,.T.); +#12205 = VERTEX_POINT('',#12206); +#12206 = CARTESIAN_POINT('',(9.1,1.5,1.85)); +#12207 = LINE('',#12208,#12209); +#12208 = CARTESIAN_POINT('',(9.1,1.5,1.85)); +#12209 = VECTOR('',#12210,1.); +#12210 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12211 = ORIENTED_EDGE('',*,*,#12212,.F.); +#12212 = EDGE_CURVE('',#12213,#12205,#12215,.T.); +#12213 = VERTEX_POINT('',#12214); +#12214 = CARTESIAN_POINT('',(9.1,1.5,4.15)); +#12215 = LINE('',#12216,#12217); +#12216 = CARTESIAN_POINT('',(9.1,1.5,7.)); +#12217 = VECTOR('',#12218,1.); +#12218 = DIRECTION('',(0.,0.,-1.)); +#12219 = ORIENTED_EDGE('',*,*,#12220,.F.); +#12220 = EDGE_CURVE('',#11894,#12213,#12221,.T.); +#12221 = LINE('',#12222,#12223); +#12222 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#12223 = VECTOR('',#12224,1.); +#12224 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12225 = PLANE('',#12226); +#12226 = AXIS2_PLACEMENT_3D('',#12227,#12228,#12229); +#12227 = CARTESIAN_POINT('',(3.75,1.5,4.536396011396)); +#12228 = DIRECTION('',(-1.224646799147E-16,-1.,-8.486585573121E-17)); +#12229 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#12230 = ADVANCED_FACE('',(#12231),#12249,.T.); +#12231 = FACE_BOUND('',#12232,.T.); +#12232 = EDGE_LOOP('',(#12233,#12234,#12242,#12248)); +#12233 = ORIENTED_EDGE('',*,*,#12195,.F.); +#12234 = ORIENTED_EDGE('',*,*,#12235,.F.); +#12235 = EDGE_CURVE('',#12236,#12188,#12238,.T.); +#12236 = VERTEX_POINT('',#12237); +#12237 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#12238 = LINE('',#12239,#12240); +#12239 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#12240 = VECTOR('',#12241,1.); +#12241 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12242 = ORIENTED_EDGE('',*,*,#12243,.T.); +#12243 = EDGE_CURVE('',#12236,#11613,#12244,.T.); +#12244 = LINE('',#12245,#12246); +#12245 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#12246 = VECTOR('',#12247,1.); +#12247 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12248 = ORIENTED_EDGE('',*,*,#11620,.T.); +#12249 = PLANE('',#12250); +#12250 = AXIS2_PLACEMENT_3D('',#12251,#12252,#12253); +#12251 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#12252 = DIRECTION('',(0.,0.,1.)); +#12253 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12254 = ADVANCED_FACE('',(#12255),#12515,.F.); +#12255 = FACE_BOUND('',#12256,.F.); +#12256 = EDGE_LOOP('',(#12257,#12265,#12266,#12274,#12282,#12290,#12298, + #12306,#12315,#12323,#12331,#12339,#12347,#12355,#12364,#12372, + #12380,#12388,#12394,#12395,#12396,#12397,#12405,#12413,#12421, + #12429,#12437,#12445,#12453,#12461,#12469,#12477,#12485,#12493, + #12501,#12509)); +#12257 = ORIENTED_EDGE('',*,*,#12258,.F.); +#12258 = EDGE_CURVE('',#11868,#12259,#12261,.T.); +#12259 = VERTEX_POINT('',#12260); +#12260 = CARTESIAN_POINT('',(8.25,2.35,0.)); +#12261 = LINE('',#12262,#12263); +#12262 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#12263 = VECTOR('',#12264,1.); +#12264 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12265 = ORIENTED_EDGE('',*,*,#11918,.T.); +#12266 = ORIENTED_EDGE('',*,*,#12267,.T.); +#12267 = EDGE_CURVE('',#11911,#12268,#12270,.T.); +#12268 = VERTEX_POINT('',#12269); +#12269 = CARTESIAN_POINT('',(8.,2.35,7.)); +#12270 = LINE('',#12271,#12272); +#12271 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#12272 = VECTOR('',#12273,1.); +#12273 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12274 = ORIENTED_EDGE('',*,*,#12275,.F.); +#12275 = EDGE_CURVE('',#12276,#12268,#12278,.T.); +#12276 = VERTEX_POINT('',#12277); +#12277 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#12278 = LINE('',#12279,#12280); +#12279 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#12280 = VECTOR('',#12281,1.); +#12281 = DIRECTION('',(0.,0.,1.)); +#12282 = ORIENTED_EDGE('',*,*,#12283,.F.); +#12283 = EDGE_CURVE('',#12284,#12276,#12286,.T.); +#12284 = VERTEX_POINT('',#12285); +#12285 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#12286 = LINE('',#12287,#12288); +#12287 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#12288 = VECTOR('',#12289,1.); +#12289 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#12290 = ORIENTED_EDGE('',*,*,#12291,.F.); +#12291 = EDGE_CURVE('',#12292,#12284,#12294,.T.); +#12292 = VERTEX_POINT('',#12293); +#12293 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#12294 = LINE('',#12295,#12296); +#12295 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#12296 = VECTOR('',#12297,1.); +#12297 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#12298 = ORIENTED_EDGE('',*,*,#12299,.F.); +#12299 = EDGE_CURVE('',#12300,#12292,#12302,.T.); +#12300 = VERTEX_POINT('',#12301); +#12301 = CARTESIAN_POINT('',(8.,2.35,3.85)); +#12302 = LINE('',#12303,#12304); +#12303 = CARTESIAN_POINT('',(8.,2.35,3.1)); +#12304 = VECTOR('',#12305,1.); +#12305 = DIRECTION('',(0.,0.,1.)); +#12306 = ORIENTED_EDGE('',*,*,#12307,.F.); +#12307 = EDGE_CURVE('',#12308,#12300,#12310,.T.); +#12308 = VERTEX_POINT('',#12309); +#12309 = CARTESIAN_POINT('',(7.25,2.35,3.1)); +#12310 = CIRCLE('',#12311,0.75); +#12311 = AXIS2_PLACEMENT_3D('',#12312,#12313,#12314); +#12312 = CARTESIAN_POINT('',(7.25,2.35,3.85)); +#12313 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12314 = DIRECTION('',(0.,0.,1.)); +#12315 = ORIENTED_EDGE('',*,*,#12316,.F.); +#12316 = EDGE_CURVE('',#12317,#12308,#12319,.T.); +#12317 = VERTEX_POINT('',#12318); +#12318 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#12319 = LINE('',#12320,#12321); +#12320 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#12321 = VECTOR('',#12322,1.); +#12322 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12323 = ORIENTED_EDGE('',*,*,#12324,.F.); +#12324 = EDGE_CURVE('',#12325,#12317,#12327,.T.); +#12325 = VERTEX_POINT('',#12326); +#12326 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#12327 = LINE('',#12328,#12329); +#12328 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#12329 = VECTOR('',#12330,1.); +#12330 = DIRECTION('',(-0.,0.,-1.)); +#12331 = ORIENTED_EDGE('',*,*,#12332,.T.); +#12332 = EDGE_CURVE('',#12325,#12333,#12335,.T.); +#12333 = VERTEX_POINT('',#12334); +#12334 = CARTESIAN_POINT('',(1.,2.35,7.)); +#12335 = LINE('',#12336,#12337); +#12336 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#12337 = VECTOR('',#12338,1.); +#12338 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12339 = ORIENTED_EDGE('',*,*,#12340,.T.); +#12340 = EDGE_CURVE('',#12333,#12341,#12343,.T.); +#12341 = VERTEX_POINT('',#12342); +#12342 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#12343 = LINE('',#12344,#12345); +#12344 = CARTESIAN_POINT('',(1.,2.35,7.)); +#12345 = VECTOR('',#12346,1.); +#12346 = DIRECTION('',(-0.,0.,-1.)); +#12347 = ORIENTED_EDGE('',*,*,#12348,.T.); +#12348 = EDGE_CURVE('',#12341,#12349,#12351,.T.); +#12349 = VERTEX_POINT('',#12350); +#12350 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#12351 = LINE('',#12352,#12353); +#12352 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#12353 = VECTOR('',#12354,1.); +#12354 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12355 = ORIENTED_EDGE('',*,*,#12356,.T.); +#12356 = EDGE_CURVE('',#12349,#12357,#12359,.T.); +#12357 = VERTEX_POINT('',#12358); +#12358 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#12359 = CIRCLE('',#12360,0.75); +#12360 = AXIS2_PLACEMENT_3D('',#12361,#12362,#12363); +#12361 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#12362 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#12363 = DIRECTION('',(0.,0.,1.)); +#12364 = ORIENTED_EDGE('',*,*,#12365,.T.); +#12365 = EDGE_CURVE('',#12357,#12366,#12368,.T.); +#12366 = VERTEX_POINT('',#12367); +#12367 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#12368 = LINE('',#12369,#12370); +#12369 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#12370 = VECTOR('',#12371,1.); +#12371 = DIRECTION('',(0.,0.,1.)); +#12372 = ORIENTED_EDGE('',*,*,#12373,.T.); +#12373 = EDGE_CURVE('',#12366,#12374,#12376,.T.); +#12374 = VERTEX_POINT('',#12375); +#12375 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#12376 = LINE('',#12377,#12378); +#12377 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#12378 = VECTOR('',#12379,1.); +#12379 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#12380 = ORIENTED_EDGE('',*,*,#12381,.T.); +#12381 = EDGE_CURVE('',#12374,#12382,#12384,.T.); +#12382 = VERTEX_POINT('',#12383); +#12383 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#12384 = LINE('',#12385,#12386); +#12385 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#12386 = VECTOR('',#12387,1.); +#12387 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#12388 = ORIENTED_EDGE('',*,*,#12389,.T.); +#12389 = EDGE_CURVE('',#12382,#12236,#12390,.T.); +#12390 = LINE('',#12391,#12392); +#12391 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#12392 = VECTOR('',#12393,1.); +#12393 = DIRECTION('',(0.,0.,1.)); +#12394 = ORIENTED_EDGE('',*,*,#12243,.T.); +#12395 = ORIENTED_EDGE('',*,*,#11612,.F.); +#12396 = ORIENTED_EDGE('',*,*,#12023,.F.); +#12397 = ORIENTED_EDGE('',*,*,#12398,.T.); +#12398 = EDGE_CURVE('',#12024,#12399,#12401,.T.); +#12399 = VERTEX_POINT('',#12400); +#12400 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#12401 = LINE('',#12402,#12403); +#12402 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#12403 = VECTOR('',#12404,1.); +#12404 = DIRECTION('',(0.,0.,1.)); +#12405 = ORIENTED_EDGE('',*,*,#12406,.F.); +#12406 = EDGE_CURVE('',#12407,#12399,#12409,.T.); +#12407 = VERTEX_POINT('',#12408); +#12408 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12409 = LINE('',#12410,#12411); +#12410 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12411 = VECTOR('',#12412,1.); +#12412 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12413 = ORIENTED_EDGE('',*,*,#12414,.F.); +#12414 = EDGE_CURVE('',#12415,#12407,#12417,.T.); +#12415 = VERTEX_POINT('',#12416); +#12416 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#12417 = LINE('',#12418,#12419); +#12418 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#12419 = VECTOR('',#12420,1.); +#12420 = DIRECTION('',(0.,0.,1.)); +#12421 = ORIENTED_EDGE('',*,*,#12422,.F.); +#12422 = EDGE_CURVE('',#12423,#12415,#12425,.T.); +#12423 = VERTEX_POINT('',#12424); +#12424 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#12425 = LINE('',#12426,#12427); +#12426 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#12427 = VECTOR('',#12428,1.); +#12428 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12429 = ORIENTED_EDGE('',*,*,#12430,.T.); +#12430 = EDGE_CURVE('',#12423,#12431,#12433,.T.); +#12431 = VERTEX_POINT('',#12432); +#12432 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#12433 = LINE('',#12434,#12435); +#12434 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#12435 = VECTOR('',#12436,1.); +#12436 = DIRECTION('',(0.,0.,1.)); +#12437 = ORIENTED_EDGE('',*,*,#12438,.F.); +#12438 = EDGE_CURVE('',#12439,#12431,#12441,.T.); +#12439 = VERTEX_POINT('',#12440); +#12440 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#12441 = LINE('',#12442,#12443); +#12442 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#12443 = VECTOR('',#12444,1.); +#12444 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12445 = ORIENTED_EDGE('',*,*,#12446,.F.); +#12446 = EDGE_CURVE('',#12447,#12439,#12449,.T.); +#12447 = VERTEX_POINT('',#12448); +#12448 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#12449 = LINE('',#12450,#12451); +#12450 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#12451 = VECTOR('',#12452,1.); +#12452 = DIRECTION('',(0.,0.,1.)); +#12453 = ORIENTED_EDGE('',*,*,#12454,.F.); +#12454 = EDGE_CURVE('',#12455,#12447,#12457,.T.); +#12455 = VERTEX_POINT('',#12456); +#12456 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#12457 = LINE('',#12458,#12459); +#12458 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#12459 = VECTOR('',#12460,1.); +#12460 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12461 = ORIENTED_EDGE('',*,*,#12462,.T.); +#12462 = EDGE_CURVE('',#12455,#12463,#12465,.T.); +#12463 = VERTEX_POINT('',#12464); +#12464 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#12465 = LINE('',#12466,#12467); +#12466 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#12467 = VECTOR('',#12468,1.); +#12468 = DIRECTION('',(0.,0.,1.)); +#12469 = ORIENTED_EDGE('',*,*,#12470,.F.); +#12470 = EDGE_CURVE('',#12471,#12463,#12473,.T.); +#12471 = VERTEX_POINT('',#12472); +#12472 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#12473 = LINE('',#12474,#12475); +#12474 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#12475 = VECTOR('',#12476,1.); +#12476 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12477 = ORIENTED_EDGE('',*,*,#12478,.F.); +#12478 = EDGE_CURVE('',#12479,#12471,#12481,.T.); +#12479 = VERTEX_POINT('',#12480); +#12480 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#12481 = LINE('',#12482,#12483); +#12482 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#12483 = VECTOR('',#12484,1.); +#12484 = DIRECTION('',(0.,0.,1.)); +#12485 = ORIENTED_EDGE('',*,*,#12486,.F.); +#12486 = EDGE_CURVE('',#12487,#12479,#12489,.T.); +#12487 = VERTEX_POINT('',#12488); +#12488 = CARTESIAN_POINT('',(6.75,2.35,0.)); +#12489 = LINE('',#12490,#12491); +#12490 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#12491 = VECTOR('',#12492,1.); +#12492 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12493 = ORIENTED_EDGE('',*,*,#12494,.T.); +#12494 = EDGE_CURVE('',#12487,#12495,#12497,.T.); +#12495 = VERTEX_POINT('',#12496); +#12496 = CARTESIAN_POINT('',(6.75,2.35,1.)); +#12497 = LINE('',#12498,#12499); +#12498 = CARTESIAN_POINT('',(6.75,2.35,0.)); +#12499 = VECTOR('',#12500,1.); +#12500 = DIRECTION('',(0.,0.,1.)); +#12501 = ORIENTED_EDGE('',*,*,#12502,.F.); +#12502 = EDGE_CURVE('',#12503,#12495,#12505,.T.); +#12503 = VERTEX_POINT('',#12504); +#12504 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#12505 = LINE('',#12506,#12507); +#12506 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#12507 = VECTOR('',#12508,1.); +#12508 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12509 = ORIENTED_EDGE('',*,*,#12510,.F.); +#12510 = EDGE_CURVE('',#12259,#12503,#12511,.T.); +#12511 = LINE('',#12512,#12513); +#12512 = CARTESIAN_POINT('',(8.25,2.35,0.)); +#12513 = VECTOR('',#12514,1.); +#12514 = DIRECTION('',(0.,0.,1.)); +#12515 = PLANE('',#12516); +#12516 = AXIS2_PLACEMENT_3D('',#12517,#12518,#12519); +#12517 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#12518 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12519 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12520 = ADVANCED_FACE('',(#12521),#12539,.F.); +#12521 = FACE_BOUND('',#12522,.F.); +#12522 = EDGE_LOOP('',(#12523,#12524,#12532,#12538)); +#12523 = ORIENTED_EDGE('',*,*,#11991,.T.); +#12524 = ORIENTED_EDGE('',*,*,#12525,.T.); +#12525 = EDGE_CURVE('',#11984,#12526,#12528,.T.); +#12526 = VERTEX_POINT('',#12527); +#12527 = CARTESIAN_POINT('',(9.1,-2.65,1.85)); +#12528 = LINE('',#12529,#12530); +#12529 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#12530 = VECTOR('',#12531,1.); +#12531 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12532 = ORIENTED_EDGE('',*,*,#12533,.F.); +#12533 = EDGE_CURVE('',#11670,#12526,#12534,.T.); +#12534 = LINE('',#12535,#12536); +#12535 = CARTESIAN_POINT('',(9.1,-2.65,7.)); +#12536 = VECTOR('',#12537,1.); +#12537 = DIRECTION('',(0.,0.,-1.)); +#12538 = ORIENTED_EDGE('',*,*,#11677,.F.); +#12539 = PLANE('',#12540); +#12540 = AXIS2_PLACEMENT_3D('',#12541,#12542,#12543); +#12541 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#12542 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12543 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12544 = ADVANCED_FACE('',(#12545),#12572,.T.); +#12545 = FACE_BOUND('',#12546,.T.); +#12546 = EDGE_LOOP('',(#12547,#12548,#12556,#12564,#12570,#12571)); +#12547 = ORIENTED_EDGE('',*,*,#12398,.T.); +#12548 = ORIENTED_EDGE('',*,*,#12549,.T.); +#12549 = EDGE_CURVE('',#12399,#12550,#12552,.T.); +#12550 = VERTEX_POINT('',#12551); +#12551 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#12552 = LINE('',#12553,#12554); +#12553 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#12554 = VECTOR('',#12555,1.); +#12555 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12556 = ORIENTED_EDGE('',*,*,#12557,.T.); +#12557 = EDGE_CURVE('',#12550,#12558,#12560,.T.); +#12558 = VERTEX_POINT('',#12559); +#12559 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#12560 = LINE('',#12561,#12562); +#12561 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#12562 = VECTOR('',#12563,1.); +#12563 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12564 = ORIENTED_EDGE('',*,*,#12565,.T.); +#12565 = EDGE_CURVE('',#12558,#11822,#12566,.T.); +#12566 = LINE('',#12567,#12568); +#12567 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#12568 = VECTOR('',#12569,1.); +#12569 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12570 = ORIENTED_EDGE('',*,*,#11829,.T.); +#12571 = ORIENTED_EDGE('',*,*,#12033,.T.); +#12572 = PLANE('',#12573); +#12573 = AXIS2_PLACEMENT_3D('',#12574,#12575,#12576); +#12574 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#12575 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12576 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12577 = ADVANCED_FACE('',(#12578),#12596,.F.); +#12578 = FACE_BOUND('',#12579,.F.); +#12579 = EDGE_LOOP('',(#12580,#12588,#12589,#12590)); +#12580 = ORIENTED_EDGE('',*,*,#12581,.T.); +#12581 = EDGE_CURVE('',#12582,#12558,#12584,.T.); +#12582 = VERTEX_POINT('',#12583); +#12583 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12584 = LINE('',#12585,#12586); +#12585 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12586 = VECTOR('',#12587,1.); +#12587 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12588 = ORIENTED_EDGE('',*,*,#12565,.T.); +#12589 = ORIENTED_EDGE('',*,*,#11821,.F.); +#12590 = ORIENTED_EDGE('',*,*,#12591,.F.); +#12591 = EDGE_CURVE('',#12582,#11814,#12592,.T.); +#12592 = LINE('',#12593,#12594); +#12593 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12594 = VECTOR('',#12595,1.); +#12595 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12596 = PLANE('',#12597); +#12597 = AXIS2_PLACEMENT_3D('',#12598,#12599,#12600); +#12598 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#12599 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#12600 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12601 = ADVANCED_FACE('',(#12602),#12627,.F.); +#12602 = FACE_BOUND('',#12603,.F.); +#12603 = EDGE_LOOP('',(#12604,#12605,#12613,#12619,#12620,#12621)); +#12604 = ORIENTED_EDGE('',*,*,#12414,.T.); +#12605 = ORIENTED_EDGE('',*,*,#12606,.T.); +#12606 = EDGE_CURVE('',#12407,#12607,#12609,.T.); +#12607 = VERTEX_POINT('',#12608); +#12608 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#12609 = LINE('',#12610,#12611); +#12610 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#12611 = VECTOR('',#12612,1.); +#12612 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12613 = ORIENTED_EDGE('',*,*,#12614,.T.); +#12614 = EDGE_CURVE('',#12607,#12582,#12615,.T.); +#12615 = LINE('',#12616,#12617); +#12616 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#12617 = VECTOR('',#12618,1.); +#12618 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12619 = ORIENTED_EDGE('',*,*,#12591,.T.); +#12620 = ORIENTED_EDGE('',*,*,#11813,.T.); +#12621 = ORIENTED_EDGE('',*,*,#12622,.T.); +#12622 = EDGE_CURVE('',#11806,#12415,#12623,.T.); +#12623 = LINE('',#12624,#12625); +#12624 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#12625 = VECTOR('',#12626,1.); +#12626 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12627 = PLANE('',#12628); +#12628 = AXIS2_PLACEMENT_3D('',#12629,#12630,#12631); +#12629 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#12630 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12631 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12632 = ADVANCED_FACE('',(#12633),#12644,.F.); +#12633 = FACE_BOUND('',#12634,.F.); +#12634 = EDGE_LOOP('',(#12635,#12636,#12637,#12638)); +#12635 = ORIENTED_EDGE('',*,*,#12422,.T.); +#12636 = ORIENTED_EDGE('',*,*,#12622,.F.); +#12637 = ORIENTED_EDGE('',*,*,#11805,.T.); +#12638 = ORIENTED_EDGE('',*,*,#12639,.T.); +#12639 = EDGE_CURVE('',#11798,#12423,#12640,.T.); +#12640 = LINE('',#12641,#12642); +#12641 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#12642 = VECTOR('',#12643,1.); +#12643 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12644 = PLANE('',#12645); +#12645 = AXIS2_PLACEMENT_3D('',#12646,#12647,#12648); +#12646 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#12647 = DIRECTION('',(0.,0.,1.)); +#12648 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12649 = ADVANCED_FACE('',(#12650),#12677,.T.); +#12650 = FACE_BOUND('',#12651,.T.); +#12651 = EDGE_LOOP('',(#12652,#12653,#12661,#12669,#12675,#12676)); +#12652 = ORIENTED_EDGE('',*,*,#12430,.T.); +#12653 = ORIENTED_EDGE('',*,*,#12654,.T.); +#12654 = EDGE_CURVE('',#12431,#12655,#12657,.T.); +#12655 = VERTEX_POINT('',#12656); +#12656 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#12657 = LINE('',#12658,#12659); +#12658 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#12659 = VECTOR('',#12660,1.); +#12660 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12661 = ORIENTED_EDGE('',*,*,#12662,.T.); +#12662 = EDGE_CURVE('',#12655,#12663,#12665,.T.); +#12663 = VERTEX_POINT('',#12664); +#12664 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#12665 = LINE('',#12666,#12667); +#12666 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#12667 = VECTOR('',#12668,1.); +#12668 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12669 = ORIENTED_EDGE('',*,*,#12670,.T.); +#12670 = EDGE_CURVE('',#12663,#11790,#12671,.T.); +#12671 = LINE('',#12672,#12673); +#12672 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#12673 = VECTOR('',#12674,1.); +#12674 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12675 = ORIENTED_EDGE('',*,*,#11797,.T.); +#12676 = ORIENTED_EDGE('',*,*,#12639,.T.); +#12677 = PLANE('',#12678); +#12678 = AXIS2_PLACEMENT_3D('',#12679,#12680,#12681); +#12679 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#12680 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12681 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12682 = ADVANCED_FACE('',(#12683),#12701,.F.); +#12683 = FACE_BOUND('',#12684,.F.); +#12684 = EDGE_LOOP('',(#12685,#12693,#12694,#12695)); +#12685 = ORIENTED_EDGE('',*,*,#12686,.T.); +#12686 = EDGE_CURVE('',#12687,#12663,#12689,.T.); +#12687 = VERTEX_POINT('',#12688); +#12688 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#12689 = LINE('',#12690,#12691); +#12690 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#12691 = VECTOR('',#12692,1.); +#12692 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12693 = ORIENTED_EDGE('',*,*,#12670,.T.); +#12694 = ORIENTED_EDGE('',*,*,#11789,.F.); +#12695 = ORIENTED_EDGE('',*,*,#12696,.F.); +#12696 = EDGE_CURVE('',#12687,#11782,#12697,.T.); +#12697 = LINE('',#12698,#12699); +#12698 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#12699 = VECTOR('',#12700,1.); +#12700 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12701 = PLANE('',#12702); +#12702 = AXIS2_PLACEMENT_3D('',#12703,#12704,#12705); +#12703 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#12704 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#12705 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12706 = ADVANCED_FACE('',(#12707),#12732,.F.); +#12707 = FACE_BOUND('',#12708,.F.); +#12708 = EDGE_LOOP('',(#12709,#12710,#12718,#12724,#12725,#12726)); +#12709 = ORIENTED_EDGE('',*,*,#12446,.T.); +#12710 = ORIENTED_EDGE('',*,*,#12711,.T.); +#12711 = EDGE_CURVE('',#12439,#12712,#12714,.T.); +#12712 = VERTEX_POINT('',#12713); +#12713 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#12714 = LINE('',#12715,#12716); +#12715 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#12716 = VECTOR('',#12717,1.); +#12717 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12718 = ORIENTED_EDGE('',*,*,#12719,.T.); +#12719 = EDGE_CURVE('',#12712,#12687,#12720,.T.); +#12720 = LINE('',#12721,#12722); +#12721 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#12722 = VECTOR('',#12723,1.); +#12723 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12724 = ORIENTED_EDGE('',*,*,#12696,.T.); +#12725 = ORIENTED_EDGE('',*,*,#11781,.T.); +#12726 = ORIENTED_EDGE('',*,*,#12727,.T.); +#12727 = EDGE_CURVE('',#11774,#12447,#12728,.T.); +#12728 = LINE('',#12729,#12730); +#12729 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#12730 = VECTOR('',#12731,1.); +#12731 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12732 = PLANE('',#12733); +#12733 = AXIS2_PLACEMENT_3D('',#12734,#12735,#12736); +#12734 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#12735 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12736 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12737 = ADVANCED_FACE('',(#12738),#12749,.F.); +#12738 = FACE_BOUND('',#12739,.F.); +#12739 = EDGE_LOOP('',(#12740,#12741,#12742,#12748)); +#12740 = ORIENTED_EDGE('',*,*,#12727,.F.); +#12741 = ORIENTED_EDGE('',*,*,#11773,.T.); +#12742 = ORIENTED_EDGE('',*,*,#12743,.T.); +#12743 = EDGE_CURVE('',#11766,#12455,#12744,.T.); +#12744 = LINE('',#12745,#12746); +#12745 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#12746 = VECTOR('',#12747,1.); +#12747 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12748 = ORIENTED_EDGE('',*,*,#12454,.T.); +#12749 = PLANE('',#12750); +#12750 = AXIS2_PLACEMENT_3D('',#12751,#12752,#12753); +#12751 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#12752 = DIRECTION('',(0.,0.,1.)); +#12753 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12754 = ADVANCED_FACE('',(#12755),#12782,.T.); +#12755 = FACE_BOUND('',#12756,.T.); +#12756 = EDGE_LOOP('',(#12757,#12758,#12766,#12774,#12780,#12781)); +#12757 = ORIENTED_EDGE('',*,*,#12462,.T.); +#12758 = ORIENTED_EDGE('',*,*,#12759,.T.); +#12759 = EDGE_CURVE('',#12463,#12760,#12762,.T.); +#12760 = VERTEX_POINT('',#12761); +#12761 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#12762 = LINE('',#12763,#12764); +#12763 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#12764 = VECTOR('',#12765,1.); +#12765 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12766 = ORIENTED_EDGE('',*,*,#12767,.T.); +#12767 = EDGE_CURVE('',#12760,#12768,#12770,.T.); +#12768 = VERTEX_POINT('',#12769); +#12769 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#12770 = LINE('',#12771,#12772); +#12771 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#12772 = VECTOR('',#12773,1.); +#12773 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12774 = ORIENTED_EDGE('',*,*,#12775,.T.); +#12775 = EDGE_CURVE('',#12768,#11758,#12776,.T.); +#12776 = LINE('',#12777,#12778); +#12777 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#12778 = VECTOR('',#12779,1.); +#12779 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12780 = ORIENTED_EDGE('',*,*,#11765,.T.); +#12781 = ORIENTED_EDGE('',*,*,#12743,.T.); +#12782 = PLANE('',#12783); +#12783 = AXIS2_PLACEMENT_3D('',#12784,#12785,#12786); +#12784 = CARTESIAN_POINT('',(4.25,-0.515451356496,0.330008245993)); +#12785 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12786 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12787 = ADVANCED_FACE('',(#12788),#12806,.F.); +#12788 = FACE_BOUND('',#12789,.F.); +#12789 = EDGE_LOOP('',(#12790,#12798,#12799,#12800)); +#12790 = ORIENTED_EDGE('',*,*,#12791,.T.); +#12791 = EDGE_CURVE('',#12792,#12768,#12794,.T.); +#12792 = VERTEX_POINT('',#12793); +#12793 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#12794 = LINE('',#12795,#12796); +#12795 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#12796 = VECTOR('',#12797,1.); +#12797 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12798 = ORIENTED_EDGE('',*,*,#12775,.T.); +#12799 = ORIENTED_EDGE('',*,*,#11757,.F.); +#12800 = ORIENTED_EDGE('',*,*,#12801,.F.); +#12801 = EDGE_CURVE('',#12792,#11750,#12802,.T.); +#12802 = LINE('',#12803,#12804); +#12803 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#12804 = VECTOR('',#12805,1.); +#12805 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12806 = PLANE('',#12807); +#12807 = AXIS2_PLACEMENT_3D('',#12808,#12809,#12810); +#12808 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#12809 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#12810 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12811 = ADVANCED_FACE('',(#12812),#12837,.F.); +#12812 = FACE_BOUND('',#12813,.F.); +#12813 = EDGE_LOOP('',(#12814,#12815,#12823,#12829,#12830,#12831)); +#12814 = ORIENTED_EDGE('',*,*,#12478,.T.); +#12815 = ORIENTED_EDGE('',*,*,#12816,.T.); +#12816 = EDGE_CURVE('',#12471,#12817,#12819,.T.); +#12817 = VERTEX_POINT('',#12818); +#12818 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#12819 = LINE('',#12820,#12821); +#12820 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#12821 = VECTOR('',#12822,1.); +#12822 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12823 = ORIENTED_EDGE('',*,*,#12824,.T.); +#12824 = EDGE_CURVE('',#12817,#12792,#12825,.T.); +#12825 = LINE('',#12826,#12827); +#12826 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#12827 = VECTOR('',#12828,1.); +#12828 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12829 = ORIENTED_EDGE('',*,*,#12801,.T.); +#12830 = ORIENTED_EDGE('',*,*,#11749,.T.); +#12831 = ORIENTED_EDGE('',*,*,#12832,.T.); +#12832 = EDGE_CURVE('',#11742,#12479,#12833,.T.); +#12833 = LINE('',#12834,#12835); +#12834 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#12835 = VECTOR('',#12836,1.); +#12836 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12837 = PLANE('',#12838); +#12838 = AXIS2_PLACEMENT_3D('',#12839,#12840,#12841); +#12839 = CARTESIAN_POINT('',(5.75,-0.515451356496,0.330008245993)); +#12840 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12841 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12842 = ADVANCED_FACE('',(#12843),#12854,.F.); +#12843 = FACE_BOUND('',#12844,.F.); +#12844 = EDGE_LOOP('',(#12845,#12846,#12852,#12853)); +#12845 = ORIENTED_EDGE('',*,*,#11741,.T.); +#12846 = ORIENTED_EDGE('',*,*,#12847,.T.); +#12847 = EDGE_CURVE('',#11734,#12487,#12848,.T.); +#12848 = LINE('',#12849,#12850); +#12849 = CARTESIAN_POINT('',(6.75,-3.4,0.)); +#12850 = VECTOR('',#12851,1.); +#12851 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12852 = ORIENTED_EDGE('',*,*,#12486,.T.); +#12853 = ORIENTED_EDGE('',*,*,#12832,.F.); +#12854 = PLANE('',#12855); +#12855 = AXIS2_PLACEMENT_3D('',#12856,#12857,#12858); +#12856 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#12857 = DIRECTION('',(0.,0.,1.)); +#12858 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12859 = ADVANCED_FACE('',(#12860),#12887,.T.); +#12860 = FACE_BOUND('',#12861,.T.); +#12861 = EDGE_LOOP('',(#12862,#12863,#12871,#12879,#12885,#12886)); +#12862 = ORIENTED_EDGE('',*,*,#12494,.T.); +#12863 = ORIENTED_EDGE('',*,*,#12864,.T.); +#12864 = EDGE_CURVE('',#12495,#12865,#12867,.T.); +#12865 = VERTEX_POINT('',#12866); +#12866 = CARTESIAN_POINT('',(6.75,0.5,0.3)); +#12867 = LINE('',#12868,#12869); +#12868 = CARTESIAN_POINT('',(6.75,2.35,1.)); +#12869 = VECTOR('',#12870,1.); +#12870 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12871 = ORIENTED_EDGE('',*,*,#12872,.T.); +#12872 = EDGE_CURVE('',#12865,#12873,#12875,.T.); +#12873 = VERTEX_POINT('',#12874); +#12874 = CARTESIAN_POINT('',(6.75,-0.5,0.3)); +#12875 = LINE('',#12876,#12877); +#12876 = CARTESIAN_POINT('',(6.75,0.5,0.3)); +#12877 = VECTOR('',#12878,1.); +#12878 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12879 = ORIENTED_EDGE('',*,*,#12880,.T.); +#12880 = EDGE_CURVE('',#12873,#11726,#12881,.T.); +#12881 = LINE('',#12882,#12883); +#12882 = CARTESIAN_POINT('',(6.75,-0.5,0.3)); +#12883 = VECTOR('',#12884,1.); +#12884 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12885 = ORIENTED_EDGE('',*,*,#11733,.T.); +#12886 = ORIENTED_EDGE('',*,*,#12847,.T.); +#12887 = PLANE('',#12888); +#12888 = AXIS2_PLACEMENT_3D('',#12889,#12890,#12891); +#12889 = CARTESIAN_POINT('',(6.75,-0.515451356496,0.330008245993)); +#12890 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12891 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12892 = ADVANCED_FACE('',(#12893),#12911,.F.); +#12893 = FACE_BOUND('',#12894,.F.); +#12894 = EDGE_LOOP('',(#12895,#12903,#12904,#12905)); +#12895 = ORIENTED_EDGE('',*,*,#12896,.T.); +#12896 = EDGE_CURVE('',#12897,#12873,#12899,.T.); +#12897 = VERTEX_POINT('',#12898); +#12898 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#12899 = LINE('',#12900,#12901); +#12900 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#12901 = VECTOR('',#12902,1.); +#12902 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12903 = ORIENTED_EDGE('',*,*,#12880,.T.); +#12904 = ORIENTED_EDGE('',*,*,#11725,.F.); +#12905 = ORIENTED_EDGE('',*,*,#12906,.F.); +#12906 = EDGE_CURVE('',#12897,#11718,#12907,.T.); +#12907 = LINE('',#12908,#12909); +#12908 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#12909 = VECTOR('',#12910,1.); +#12910 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12911 = PLANE('',#12912); +#12912 = AXIS2_PLACEMENT_3D('',#12913,#12914,#12915); +#12913 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#12914 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#12915 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#12916 = ADVANCED_FACE('',(#12917),#12942,.F.); +#12917 = FACE_BOUND('',#12918,.F.); +#12918 = EDGE_LOOP('',(#12919,#12920,#12928,#12934,#12935,#12936)); +#12919 = ORIENTED_EDGE('',*,*,#12510,.T.); +#12920 = ORIENTED_EDGE('',*,*,#12921,.T.); +#12921 = EDGE_CURVE('',#12503,#12922,#12924,.T.); +#12922 = VERTEX_POINT('',#12923); +#12923 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#12924 = LINE('',#12925,#12926); +#12925 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#12926 = VECTOR('',#12927,1.); +#12927 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#12928 = ORIENTED_EDGE('',*,*,#12929,.T.); +#12929 = EDGE_CURVE('',#12922,#12897,#12930,.T.); +#12930 = LINE('',#12931,#12932); +#12931 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#12932 = VECTOR('',#12933,1.); +#12933 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12934 = ORIENTED_EDGE('',*,*,#12906,.T.); +#12935 = ORIENTED_EDGE('',*,*,#11717,.T.); +#12936 = ORIENTED_EDGE('',*,*,#12937,.T.); +#12937 = EDGE_CURVE('',#11710,#12259,#12938,.T.); +#12938 = LINE('',#12939,#12940); +#12939 = CARTESIAN_POINT('',(8.25,-3.4,0.)); +#12940 = VECTOR('',#12941,1.); +#12941 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12942 = PLANE('',#12943); +#12943 = AXIS2_PLACEMENT_3D('',#12944,#12945,#12946); +#12944 = CARTESIAN_POINT('',(8.25,-0.515451356496,0.330008245993)); +#12945 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#12946 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#12947 = ADVANCED_FACE('',(#12948),#12954,.F.); +#12948 = FACE_BOUND('',#12949,.F.); +#12949 = EDGE_LOOP('',(#12950,#12951,#12952,#12953)); +#12950 = ORIENTED_EDGE('',*,*,#11867,.T.); +#12951 = ORIENTED_EDGE('',*,*,#12258,.T.); +#12952 = ORIENTED_EDGE('',*,*,#12937,.F.); +#12953 = ORIENTED_EDGE('',*,*,#11709,.T.); +#12954 = PLANE('',#12955); +#12955 = AXIS2_PLACEMENT_3D('',#12956,#12957,#12958); +#12956 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#12957 = DIRECTION('',(0.,0.,1.)); +#12958 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12959 = ADVANCED_FACE('',(#12960),#12987,.F.); +#12960 = FACE_BOUND('',#12961,.F.); +#12961 = EDGE_LOOP('',(#12962,#12963,#12964,#12965,#12971,#12972,#12981) + ); +#12962 = ORIENTED_EDGE('',*,*,#11942,.T.); +#12963 = ORIENTED_EDGE('',*,*,#11853,.F.); +#12964 = ORIENTED_EDGE('',*,*,#12533,.T.); +#12965 = ORIENTED_EDGE('',*,*,#12966,.T.); +#12966 = EDGE_CURVE('',#12526,#12205,#12967,.T.); +#12967 = LINE('',#12968,#12969); +#12968 = CARTESIAN_POINT('',(9.1,-2.65,1.85)); +#12969 = VECTOR('',#12970,1.); +#12970 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12971 = ORIENTED_EDGE('',*,*,#12212,.F.); +#12972 = ORIENTED_EDGE('',*,*,#12973,.F.); +#12973 = EDGE_CURVE('',#12974,#12213,#12976,.T.); +#12974 = VERTEX_POINT('',#12975); +#12975 = CARTESIAN_POINT('',(9.1,1.,3.65)); +#12976 = CIRCLE('',#12977,0.5); +#12977 = AXIS2_PLACEMENT_3D('',#12978,#12979,#12980); +#12978 = CARTESIAN_POINT('',(9.1,1.,4.15)); +#12979 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12980 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12981 = ORIENTED_EDGE('',*,*,#12982,.T.); +#12982 = EDGE_CURVE('',#12974,#11935,#12983,.T.); +#12983 = LINE('',#12984,#12985); +#12984 = CARTESIAN_POINT('',(9.1,-0.825,3.65)); +#12985 = VECTOR('',#12986,1.); +#12986 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#12987 = PLANE('',#12988); +#12988 = AXIS2_PLACEMENT_3D('',#12989,#12990,#12991); +#12989 = CARTESIAN_POINT('',(9.1,-2.65,7.)); +#12990 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#12991 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#12992 = ADVANCED_FACE('',(#12993),#13004,.T.); +#12993 = FACE_BOUND('',#12994,.T.); +#12994 = EDGE_LOOP('',(#12995,#12996,#12997,#12998)); +#12995 = ORIENTED_EDGE('',*,*,#12065,.F.); +#12996 = ORIENTED_EDGE('',*,*,#11910,.T.); +#12997 = ORIENTED_EDGE('',*,*,#12267,.T.); +#12998 = ORIENTED_EDGE('',*,*,#12999,.T.); +#12999 = EDGE_CURVE('',#12268,#12066,#13000,.T.); +#13000 = LINE('',#13001,#13002); +#13001 = CARTESIAN_POINT('',(8.,2.35,7.)); +#13002 = VECTOR('',#13003,1.); +#13003 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13004 = PLANE('',#13005); +#13005 = AXIS2_PLACEMENT_3D('',#13006,#13007,#13008); +#13006 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#13007 = DIRECTION('',(0.,0.,1.)); +#13008 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13009 = ADVANCED_FACE('',(#13010),#13021,.F.); +#13010 = FACE_BOUND('',#13011,.F.); +#13011 = EDGE_LOOP('',(#13012,#13018,#13019,#13020)); +#13012 = ORIENTED_EDGE('',*,*,#13013,.T.); +#13013 = EDGE_CURVE('',#11886,#12974,#13014,.T.); +#13014 = LINE('',#13015,#13016); +#13015 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#13016 = VECTOR('',#13017,1.); +#13017 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13018 = ORIENTED_EDGE('',*,*,#12973,.T.); +#13019 = ORIENTED_EDGE('',*,*,#12220,.F.); +#13020 = ORIENTED_EDGE('',*,*,#11893,.T.); +#13021 = CYLINDRICAL_SURFACE('',#13022,0.5); +#13022 = AXIS2_PLACEMENT_3D('',#13023,#13024,#13025); +#13023 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#13024 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#13025 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13026 = ADVANCED_FACE('',(#13027),#13033,.T.); +#13027 = FACE_BOUND('',#13028,.T.); +#13028 = EDGE_LOOP('',(#13029,#13030,#13031,#13032)); +#13029 = ORIENTED_EDGE('',*,*,#11885,.F.); +#13030 = ORIENTED_EDGE('',*,*,#13013,.T.); +#13031 = ORIENTED_EDGE('',*,*,#12982,.T.); +#13032 = ORIENTED_EDGE('',*,*,#11934,.F.); +#13033 = PLANE('',#13034); +#13034 = AXIS2_PLACEMENT_3D('',#13035,#13036,#13037); +#13035 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#13036 = DIRECTION('',(0.,0.,1.)); +#13037 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13038 = ADVANCED_FACE('',(#13039,#13045,#13079,#13113,#13147),#13181, + .T.); +#13039 = FACE_BOUND('',#13040,.T.); +#13040 = EDGE_LOOP('',(#13041,#13042,#13043,#13044)); +#13041 = ORIENTED_EDGE('',*,*,#12204,.T.); +#13042 = ORIENTED_EDGE('',*,*,#11983,.T.); +#13043 = ORIENTED_EDGE('',*,*,#12525,.T.); +#13044 = ORIENTED_EDGE('',*,*,#12966,.T.); +#13045 = FACE_BOUND('',#13046,.T.); +#13046 = EDGE_LOOP('',(#13047,#13057,#13065,#13073)); +#13047 = ORIENTED_EDGE('',*,*,#13048,.F.); +#13048 = EDGE_CURVE('',#13049,#13051,#13053,.T.); +#13049 = VERTEX_POINT('',#13050); +#13050 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#13051 = VERTEX_POINT('',#13052); +#13052 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#13053 = LINE('',#13054,#13055); +#13054 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#13055 = VECTOR('',#13056,1.); +#13056 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13057 = ORIENTED_EDGE('',*,*,#13058,.T.); +#13058 = EDGE_CURVE('',#13049,#13059,#13061,.T.); +#13059 = VERTEX_POINT('',#13060); +#13060 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#13061 = LINE('',#13062,#13063); +#13062 = CARTESIAN_POINT('',(2.035,0.32,1.85)); +#13063 = VECTOR('',#13064,1.); +#13064 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13065 = ORIENTED_EDGE('',*,*,#13066,.T.); +#13066 = EDGE_CURVE('',#13059,#13067,#13069,.T.); +#13067 = VERTEX_POINT('',#13068); +#13068 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#13069 = LINE('',#13070,#13071); +#13070 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#13071 = VECTOR('',#13072,1.); +#13072 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13073 = ORIENTED_EDGE('',*,*,#13074,.T.); +#13074 = EDGE_CURVE('',#13067,#13051,#13075,.T.); +#13075 = LINE('',#13076,#13077); +#13076 = CARTESIAN_POINT('',(2.035,-0.32,1.85)); +#13077 = VECTOR('',#13078,1.); +#13078 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13079 = FACE_BOUND('',#13080,.T.); +#13080 = EDGE_LOOP('',(#13081,#13091,#13099,#13107)); +#13081 = ORIENTED_EDGE('',*,*,#13082,.T.); +#13082 = EDGE_CURVE('',#13083,#13085,#13087,.T.); +#13083 = VERTEX_POINT('',#13084); +#13084 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#13085 = VERTEX_POINT('',#13086); +#13086 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#13087 = LINE('',#13088,#13089); +#13088 = CARTESIAN_POINT('',(2.82,-0.2875,1.85)); +#13089 = VECTOR('',#13090,1.); +#13090 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13091 = ORIENTED_EDGE('',*,*,#13092,.T.); +#13092 = EDGE_CURVE('',#13085,#13093,#13095,.T.); +#13093 = VERTEX_POINT('',#13094); +#13094 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#13095 = LINE('',#13096,#13097); +#13096 = CARTESIAN_POINT('',(3.285,-0.32,1.85)); +#13097 = VECTOR('',#13098,1.); +#13098 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13099 = ORIENTED_EDGE('',*,*,#13100,.F.); +#13100 = EDGE_CURVE('',#13101,#13093,#13103,.T.); +#13101 = VERTEX_POINT('',#13102); +#13102 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#13103 = LINE('',#13104,#13105); +#13104 = CARTESIAN_POINT('',(2.18,-0.2875,1.85)); +#13105 = VECTOR('',#13106,1.); +#13106 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13107 = ORIENTED_EDGE('',*,*,#13108,.T.); +#13108 = EDGE_CURVE('',#13101,#13083,#13109,.T.); +#13109 = LINE('',#13110,#13111); +#13110 = CARTESIAN_POINT('',(3.285,0.32,1.85)); +#13111 = VECTOR('',#13112,1.); +#13112 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13113 = FACE_BOUND('',#13114,.T.); +#13114 = EDGE_LOOP('',(#13115,#13125,#13133,#13141)); +#13115 = ORIENTED_EDGE('',*,*,#13116,.F.); +#13116 = EDGE_CURVE('',#13117,#13119,#13121,.T.); +#13117 = VERTEX_POINT('',#13118); +#13118 = CARTESIAN_POINT('',(4.68,0.32,1.85)); +#13119 = VERTEX_POINT('',#13120); +#13120 = CARTESIAN_POINT('',(4.68,-0.32,1.85)); +#13121 = LINE('',#13122,#13123); +#13122 = CARTESIAN_POINT('',(4.68,-0.2875,1.85)); +#13123 = VECTOR('',#13124,1.); +#13124 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13125 = ORIENTED_EDGE('',*,*,#13126,.T.); +#13126 = EDGE_CURVE('',#13117,#13127,#13129,.T.); +#13127 = VERTEX_POINT('',#13128); +#13128 = CARTESIAN_POINT('',(5.32,0.32,1.85)); +#13129 = LINE('',#13130,#13131); +#13130 = CARTESIAN_POINT('',(4.535,0.32,1.85)); +#13131 = VECTOR('',#13132,1.); +#13132 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13133 = ORIENTED_EDGE('',*,*,#13134,.T.); +#13134 = EDGE_CURVE('',#13127,#13135,#13137,.T.); +#13135 = VERTEX_POINT('',#13136); +#13136 = CARTESIAN_POINT('',(5.32,-0.32,1.85)); +#13137 = LINE('',#13138,#13139); +#13138 = CARTESIAN_POINT('',(5.32,-0.2875,1.85)); +#13139 = VECTOR('',#13140,1.); +#13140 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13141 = ORIENTED_EDGE('',*,*,#13142,.T.); +#13142 = EDGE_CURVE('',#13135,#13119,#13143,.T.); +#13143 = LINE('',#13144,#13145); +#13144 = CARTESIAN_POINT('',(4.535,-0.32,1.85)); +#13145 = VECTOR('',#13146,1.); +#13146 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13147 = FACE_BOUND('',#13148,.T.); +#13148 = EDGE_LOOP('',(#13149,#13159,#13167,#13175)); +#13149 = ORIENTED_EDGE('',*,*,#13150,.T.); +#13150 = EDGE_CURVE('',#13151,#13153,#13155,.T.); +#13151 = VERTEX_POINT('',#13152); +#13152 = CARTESIAN_POINT('',(7.18,0.32,1.85)); +#13153 = VERTEX_POINT('',#13154); +#13154 = CARTESIAN_POINT('',(7.82,0.32,1.85)); +#13155 = LINE('',#13156,#13157); +#13156 = CARTESIAN_POINT('',(5.785,0.32,1.85)); +#13157 = VECTOR('',#13158,1.); +#13158 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13159 = ORIENTED_EDGE('',*,*,#13160,.T.); +#13160 = EDGE_CURVE('',#13153,#13161,#13163,.T.); +#13161 = VERTEX_POINT('',#13162); +#13162 = CARTESIAN_POINT('',(7.82,-0.32,1.85)); +#13163 = LINE('',#13164,#13165); +#13164 = CARTESIAN_POINT('',(7.82,-0.26920299558,1.85)); +#13165 = VECTOR('',#13166,1.); +#13166 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13167 = ORIENTED_EDGE('',*,*,#13168,.T.); +#13168 = EDGE_CURVE('',#13161,#13169,#13171,.T.); +#13169 = VERTEX_POINT('',#13170); +#13170 = CARTESIAN_POINT('',(7.18,-0.32,1.85)); +#13171 = LINE('',#13172,#13173); +#13172 = CARTESIAN_POINT('',(5.785,-0.32,1.85)); +#13173 = VECTOR('',#13174,1.); +#13174 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13175 = ORIENTED_EDGE('',*,*,#13176,.F.); +#13176 = EDGE_CURVE('',#13151,#13169,#13177,.T.); +#13177 = LINE('',#13178,#13179); +#13178 = CARTESIAN_POINT('',(7.18,-0.26920299558,1.85)); +#13179 = VECTOR('',#13180,1.); +#13180 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13181 = PLANE('',#13182); +#13182 = AXIS2_PLACEMENT_3D('',#13183,#13184,#13185); +#13183 = CARTESIAN_POINT('',(3.75,-0.575,1.85)); +#13184 = DIRECTION('',(0.,0.,1.)); +#13185 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13186 = ADVANCED_FACE('',(#13187),#13198,.F.); +#13187 = FACE_BOUND('',#13188,.F.); +#13188 = EDGE_LOOP('',(#13189,#13190,#13196,#13197)); +#13189 = ORIENTED_EDGE('',*,*,#12389,.F.); +#13190 = ORIENTED_EDGE('',*,*,#13191,.T.); +#13191 = EDGE_CURVE('',#12382,#12180,#13192,.T.); +#13192 = LINE('',#13193,#13194); +#13193 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#13194 = VECTOR('',#13195,1.); +#13195 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13196 = ORIENTED_EDGE('',*,*,#12187,.F.); +#13197 = ORIENTED_EDGE('',*,*,#12235,.F.); +#13198 = PLANE('',#13199); +#13199 = AXIS2_PLACEMENT_3D('',#13200,#13201,#13202); +#13200 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#13201 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13202 = DIRECTION('',(0.,0.,1.)); +#13203 = ADVANCED_FACE('',(#13204),#13215,.F.); +#13204 = FACE_BOUND('',#13205,.F.); +#13205 = EDGE_LOOP('',(#13206,#13207,#13213,#13214)); +#13206 = ORIENTED_EDGE('',*,*,#12381,.F.); +#13207 = ORIENTED_EDGE('',*,*,#13208,.T.); +#13208 = EDGE_CURVE('',#12374,#12172,#13209,.T.); +#13209 = LINE('',#13210,#13211); +#13210 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#13211 = VECTOR('',#13212,1.); +#13212 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13213 = ORIENTED_EDGE('',*,*,#12179,.F.); +#13214 = ORIENTED_EDGE('',*,*,#13191,.F.); +#13215 = PLANE('',#13216); +#13216 = AXIS2_PLACEMENT_3D('',#13217,#13218,#13219); +#13217 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#13218 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#13219 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13220 = ADVANCED_FACE('',(#13221),#13232,.F.); +#13221 = FACE_BOUND('',#13222,.F.); +#13222 = EDGE_LOOP('',(#13223,#13224,#13230,#13231)); +#13223 = ORIENTED_EDGE('',*,*,#12373,.F.); +#13224 = ORIENTED_EDGE('',*,*,#13225,.T.); +#13225 = EDGE_CURVE('',#12366,#12164,#13226,.T.); +#13226 = LINE('',#13227,#13228); +#13227 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#13228 = VECTOR('',#13229,1.); +#13229 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13230 = ORIENTED_EDGE('',*,*,#12171,.F.); +#13231 = ORIENTED_EDGE('',*,*,#13208,.F.); +#13232 = PLANE('',#13233); +#13233 = AXIS2_PLACEMENT_3D('',#13234,#13235,#13236); +#13234 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#13235 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13236 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#13237 = ADVANCED_FACE('',(#13238),#13249,.F.); +#13238 = FACE_BOUND('',#13239,.F.); +#13239 = EDGE_LOOP('',(#13240,#13241,#13247,#13248)); +#13240 = ORIENTED_EDGE('',*,*,#12365,.F.); +#13241 = ORIENTED_EDGE('',*,*,#13242,.T.); +#13242 = EDGE_CURVE('',#12357,#12155,#13243,.T.); +#13243 = LINE('',#13244,#13245); +#13244 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#13245 = VECTOR('',#13246,1.); +#13246 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13247 = ORIENTED_EDGE('',*,*,#12163,.F.); +#13248 = ORIENTED_EDGE('',*,*,#13225,.F.); +#13249 = PLANE('',#13250); +#13250 = AXIS2_PLACEMENT_3D('',#13251,#13252,#13253); +#13251 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#13252 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13253 = DIRECTION('',(0.,0.,1.)); +#13254 = ADVANCED_FACE('',(#13255),#13266,.F.); +#13255 = FACE_BOUND('',#13256,.F.); +#13256 = EDGE_LOOP('',(#13257,#13258,#13259,#13260)); +#13257 = ORIENTED_EDGE('',*,*,#12154,.F.); +#13258 = ORIENTED_EDGE('',*,*,#13242,.F.); +#13259 = ORIENTED_EDGE('',*,*,#12356,.F.); +#13260 = ORIENTED_EDGE('',*,*,#13261,.T.); +#13261 = EDGE_CURVE('',#12349,#12147,#13262,.T.); +#13262 = LINE('',#13263,#13264); +#13263 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#13264 = VECTOR('',#13265,1.); +#13265 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13266 = CYLINDRICAL_SURFACE('',#13267,0.75); +#13267 = AXIS2_PLACEMENT_3D('',#13268,#13269,#13270); +#13268 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#13269 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13270 = DIRECTION('',(-0.,0.,-1.)); +#13271 = ADVANCED_FACE('',(#13272),#13283,.F.); +#13272 = FACE_BOUND('',#13273,.F.); +#13273 = EDGE_LOOP('',(#13274,#13275,#13276,#13282)); +#13274 = ORIENTED_EDGE('',*,*,#13261,.F.); +#13275 = ORIENTED_EDGE('',*,*,#12348,.F.); +#13276 = ORIENTED_EDGE('',*,*,#13277,.T.); +#13277 = EDGE_CURVE('',#12341,#12139,#13278,.T.); +#13278 = LINE('',#13279,#13280); +#13279 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#13280 = VECTOR('',#13281,1.); +#13281 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13282 = ORIENTED_EDGE('',*,*,#12146,.F.); +#13283 = PLANE('',#13284); +#13284 = AXIS2_PLACEMENT_3D('',#13285,#13286,#13287); +#13285 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#13286 = DIRECTION('',(-0.,0.,-1.)); +#13287 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13288 = ADVANCED_FACE('',(#13289),#13300,.F.); +#13289 = FACE_BOUND('',#13290,.F.); +#13290 = EDGE_LOOP('',(#13291,#13292,#13298,#13299)); +#13291 = ORIENTED_EDGE('',*,*,#12340,.F.); +#13292 = ORIENTED_EDGE('',*,*,#13293,.T.); +#13293 = EDGE_CURVE('',#12333,#12131,#13294,.T.); +#13294 = LINE('',#13295,#13296); +#13295 = CARTESIAN_POINT('',(1.,2.35,7.)); +#13296 = VECTOR('',#13297,1.); +#13297 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13298 = ORIENTED_EDGE('',*,*,#12138,.F.); +#13299 = ORIENTED_EDGE('',*,*,#13277,.F.); +#13300 = PLANE('',#13301); +#13301 = AXIS2_PLACEMENT_3D('',#13302,#13303,#13304); +#13302 = CARTESIAN_POINT('',(1.,2.35,7.)); +#13303 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13304 = DIRECTION('',(0.,-0.,-1.)); +#13305 = ADVANCED_FACE('',(#13306),#13317,.T.); +#13306 = FACE_BOUND('',#13307,.T.); +#13307 = EDGE_LOOP('',(#13308,#13309,#13315,#13316)); +#13308 = ORIENTED_EDGE('',*,*,#12130,.F.); +#13309 = ORIENTED_EDGE('',*,*,#13310,.F.); +#13310 = EDGE_CURVE('',#12325,#12123,#13311,.T.); +#13311 = LINE('',#13312,#13313); +#13312 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#13313 = VECTOR('',#13314,1.); +#13314 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13315 = ORIENTED_EDGE('',*,*,#12332,.T.); +#13316 = ORIENTED_EDGE('',*,*,#13293,.T.); +#13317 = PLANE('',#13318); +#13318 = AXIS2_PLACEMENT_3D('',#13319,#13320,#13321); +#13319 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#13320 = DIRECTION('',(0.,0.,1.)); +#13321 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13322 = ADVANCED_FACE('',(#13323),#13334,.T.); +#13323 = FACE_BOUND('',#13324,.T.); +#13324 = EDGE_LOOP('',(#13325,#13326,#13327,#13328)); +#13325 = ORIENTED_EDGE('',*,*,#12324,.F.); +#13326 = ORIENTED_EDGE('',*,*,#13310,.T.); +#13327 = ORIENTED_EDGE('',*,*,#12122,.F.); +#13328 = ORIENTED_EDGE('',*,*,#13329,.F.); +#13329 = EDGE_CURVE('',#12317,#12115,#13330,.T.); +#13330 = LINE('',#13331,#13332); +#13331 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#13332 = VECTOR('',#13333,1.); +#13333 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13334 = PLANE('',#13335); +#13335 = AXIS2_PLACEMENT_3D('',#13336,#13337,#13338); +#13336 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#13337 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13338 = DIRECTION('',(0.,-0.,-1.)); +#13339 = ADVANCED_FACE('',(#13340),#13351,.T.); +#13340 = FACE_BOUND('',#13341,.T.); +#13341 = EDGE_LOOP('',(#13342,#13348,#13349,#13350)); +#13342 = ORIENTED_EDGE('',*,*,#13343,.F.); +#13343 = EDGE_CURVE('',#12308,#12106,#13344,.T.); +#13344 = LINE('',#13345,#13346); +#13345 = CARTESIAN_POINT('',(7.25,2.35,3.1)); +#13346 = VECTOR('',#13347,1.); +#13347 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13348 = ORIENTED_EDGE('',*,*,#12316,.F.); +#13349 = ORIENTED_EDGE('',*,*,#13329,.T.); +#13350 = ORIENTED_EDGE('',*,*,#12114,.F.); +#13351 = PLANE('',#13352); +#13352 = AXIS2_PLACEMENT_3D('',#13353,#13354,#13355); +#13353 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#13354 = DIRECTION('',(0.,0.,1.)); +#13355 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13356 = ADVANCED_FACE('',(#13357),#13368,.F.); +#13357 = FACE_BOUND('',#13358,.F.); +#13358 = EDGE_LOOP('',(#13359,#13360,#13361,#13367)); +#13359 = ORIENTED_EDGE('',*,*,#13343,.F.); +#13360 = ORIENTED_EDGE('',*,*,#12307,.T.); +#13361 = ORIENTED_EDGE('',*,*,#13362,.T.); +#13362 = EDGE_CURVE('',#12300,#12098,#13363,.T.); +#13363 = LINE('',#13364,#13365); +#13364 = CARTESIAN_POINT('',(8.,2.35,3.85)); +#13365 = VECTOR('',#13366,1.); +#13366 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13367 = ORIENTED_EDGE('',*,*,#12105,.F.); +#13368 = CYLINDRICAL_SURFACE('',#13369,0.75); +#13369 = AXIS2_PLACEMENT_3D('',#13370,#13371,#13372); +#13370 = CARTESIAN_POINT('',(7.25,2.35,3.85)); +#13371 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13372 = DIRECTION('',(0.,-0.,-1.)); +#13373 = ADVANCED_FACE('',(#13374),#13385,.T.); +#13374 = FACE_BOUND('',#13375,.T.); +#13375 = EDGE_LOOP('',(#13376,#13377,#13378,#13379)); +#13376 = ORIENTED_EDGE('',*,*,#12299,.F.); +#13377 = ORIENTED_EDGE('',*,*,#13362,.T.); +#13378 = ORIENTED_EDGE('',*,*,#12097,.F.); +#13379 = ORIENTED_EDGE('',*,*,#13380,.F.); +#13380 = EDGE_CURVE('',#12292,#12090,#13381,.T.); +#13381 = LINE('',#13382,#13383); +#13382 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#13383 = VECTOR('',#13384,1.); +#13384 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13385 = PLANE('',#13386); +#13386 = AXIS2_PLACEMENT_3D('',#13387,#13388,#13389); +#13387 = CARTESIAN_POINT('',(8.,2.35,3.1)); +#13388 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13389 = DIRECTION('',(0.,0.,1.)); +#13390 = ADVANCED_FACE('',(#13391),#13402,.T.); +#13391 = FACE_BOUND('',#13392,.T.); +#13392 = EDGE_LOOP('',(#13393,#13394,#13395,#13396)); +#13393 = ORIENTED_EDGE('',*,*,#12291,.F.); +#13394 = ORIENTED_EDGE('',*,*,#13380,.T.); +#13395 = ORIENTED_EDGE('',*,*,#12089,.F.); +#13396 = ORIENTED_EDGE('',*,*,#13397,.F.); +#13397 = EDGE_CURVE('',#12284,#12082,#13398,.T.); +#13398 = LINE('',#13399,#13400); +#13399 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#13400 = VECTOR('',#13401,1.); +#13401 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13402 = PLANE('',#13403); +#13403 = AXIS2_PLACEMENT_3D('',#13404,#13405,#13406); +#13404 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#13405 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#13406 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13407 = ADVANCED_FACE('',(#13408),#13419,.T.); +#13408 = FACE_BOUND('',#13409,.T.); +#13409 = EDGE_LOOP('',(#13410,#13411,#13412,#13413)); +#13410 = ORIENTED_EDGE('',*,*,#12283,.F.); +#13411 = ORIENTED_EDGE('',*,*,#13397,.T.); +#13412 = ORIENTED_EDGE('',*,*,#12081,.F.); +#13413 = ORIENTED_EDGE('',*,*,#13414,.F.); +#13414 = EDGE_CURVE('',#12276,#12074,#13415,.T.); +#13415 = LINE('',#13416,#13417); +#13416 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#13417 = VECTOR('',#13418,1.); +#13418 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13419 = PLANE('',#13420); +#13420 = AXIS2_PLACEMENT_3D('',#13421,#13422,#13423); +#13421 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#13422 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#13423 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#13424 = ADVANCED_FACE('',(#13425),#13431,.T.); +#13425 = FACE_BOUND('',#13426,.T.); +#13426 = EDGE_LOOP('',(#13427,#13428,#13429,#13430)); +#13427 = ORIENTED_EDGE('',*,*,#12275,.F.); +#13428 = ORIENTED_EDGE('',*,*,#13414,.T.); +#13429 = ORIENTED_EDGE('',*,*,#12073,.F.); +#13430 = ORIENTED_EDGE('',*,*,#12999,.F.); +#13431 = PLANE('',#13432); +#13432 = AXIS2_PLACEMENT_3D('',#13433,#13434,#13435); +#13433 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#13434 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13435 = DIRECTION('',(0.,0.,1.)); +#13436 = ADVANCED_FACE('',(#13437),#13448,.F.); +#13437 = FACE_BOUND('',#13438,.F.); +#13438 = EDGE_LOOP('',(#13439,#13440,#13441,#13447)); +#13439 = ORIENTED_EDGE('',*,*,#12502,.T.); +#13440 = ORIENTED_EDGE('',*,*,#12864,.T.); +#13441 = ORIENTED_EDGE('',*,*,#13442,.F.); +#13442 = EDGE_CURVE('',#12922,#12865,#13443,.T.); +#13443 = LINE('',#13444,#13445); +#13444 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#13445 = VECTOR('',#13446,1.); +#13446 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13447 = ORIENTED_EDGE('',*,*,#12921,.F.); +#13448 = PLANE('',#13449); +#13449 = AXIS2_PLACEMENT_3D('',#13450,#13451,#13452); +#13450 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#13451 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#13452 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13453 = ADVANCED_FACE('',(#13454),#13465,.F.); +#13454 = FACE_BOUND('',#13455,.F.); +#13455 = EDGE_LOOP('',(#13456,#13457,#13458,#13464)); +#13456 = ORIENTED_EDGE('',*,*,#12470,.T.); +#13457 = ORIENTED_EDGE('',*,*,#12759,.T.); +#13458 = ORIENTED_EDGE('',*,*,#13459,.F.); +#13459 = EDGE_CURVE('',#12817,#12760,#13460,.T.); +#13460 = LINE('',#13461,#13462); +#13461 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#13462 = VECTOR('',#13463,1.); +#13463 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13464 = ORIENTED_EDGE('',*,*,#12816,.F.); +#13465 = PLANE('',#13466); +#13466 = AXIS2_PLACEMENT_3D('',#13467,#13468,#13469); +#13467 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#13468 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#13469 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13470 = ADVANCED_FACE('',(#13471),#13482,.F.); +#13471 = FACE_BOUND('',#13472,.F.); +#13472 = EDGE_LOOP('',(#13473,#13474,#13475,#13481)); +#13473 = ORIENTED_EDGE('',*,*,#12438,.T.); +#13474 = ORIENTED_EDGE('',*,*,#12654,.T.); +#13475 = ORIENTED_EDGE('',*,*,#13476,.F.); +#13476 = EDGE_CURVE('',#12712,#12655,#13477,.T.); +#13477 = LINE('',#13478,#13479); +#13478 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13479 = VECTOR('',#13480,1.); +#13480 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13481 = ORIENTED_EDGE('',*,*,#12711,.F.); +#13482 = PLANE('',#13483); +#13483 = AXIS2_PLACEMENT_3D('',#13484,#13485,#13486); +#13484 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#13485 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#13486 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13487 = ADVANCED_FACE('',(#13488),#13499,.F.); +#13488 = FACE_BOUND('',#13489,.F.); +#13489 = EDGE_LOOP('',(#13490,#13491,#13492,#13498)); +#13490 = ORIENTED_EDGE('',*,*,#12406,.T.); +#13491 = ORIENTED_EDGE('',*,*,#12549,.T.); +#13492 = ORIENTED_EDGE('',*,*,#13493,.F.); +#13493 = EDGE_CURVE('',#12607,#12550,#13494,.T.); +#13494 = LINE('',#13495,#13496); +#13495 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#13496 = VECTOR('',#13497,1.); +#13497 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13498 = ORIENTED_EDGE('',*,*,#12606,.F.); +#13499 = PLANE('',#13500); +#13500 = AXIS2_PLACEMENT_3D('',#13501,#13502,#13503); +#13501 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#13502 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#13503 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#13504 = ADVANCED_FACE('',(#13505,#13511),#13545,.F.); +#13505 = FACE_BOUND('',#13506,.F.); +#13506 = EDGE_LOOP('',(#13507,#13508,#13509,#13510)); +#13507 = ORIENTED_EDGE('',*,*,#13493,.T.); +#13508 = ORIENTED_EDGE('',*,*,#12557,.T.); +#13509 = ORIENTED_EDGE('',*,*,#12581,.F.); +#13510 = ORIENTED_EDGE('',*,*,#12614,.F.); +#13511 = FACE_BOUND('',#13512,.F.); +#13512 = EDGE_LOOP('',(#13513,#13523,#13531,#13539)); +#13513 = ORIENTED_EDGE('',*,*,#13514,.F.); +#13514 = EDGE_CURVE('',#13515,#13517,#13519,.T.); +#13515 = VERTEX_POINT('',#13516); +#13516 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#13517 = VERTEX_POINT('',#13518); +#13518 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#13519 = LINE('',#13520,#13521); +#13520 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#13521 = VECTOR('',#13522,1.); +#13522 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13523 = ORIENTED_EDGE('',*,*,#13524,.T.); +#13524 = EDGE_CURVE('',#13515,#13525,#13527,.T.); +#13525 = VERTEX_POINT('',#13526); +#13526 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#13527 = LINE('',#13528,#13529); +#13528 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#13529 = VECTOR('',#13530,1.); +#13530 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13531 = ORIENTED_EDGE('',*,*,#13532,.T.); +#13532 = EDGE_CURVE('',#13525,#13533,#13535,.T.); +#13533 = VERTEX_POINT('',#13534); +#13534 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#13535 = LINE('',#13536,#13537); +#13536 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#13537 = VECTOR('',#13538,1.); +#13538 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13539 = ORIENTED_EDGE('',*,*,#13540,.T.); +#13540 = EDGE_CURVE('',#13533,#13517,#13541,.T.); +#13541 = LINE('',#13542,#13543); +#13542 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#13543 = VECTOR('',#13544,1.); +#13544 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13545 = PLANE('',#13546); +#13546 = AXIS2_PLACEMENT_3D('',#13547,#13548,#13549); +#13547 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#13548 = DIRECTION('',(0.,0.,1.)); +#13549 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13550 = ADVANCED_FACE('',(#13551,#13557),#13591,.F.); +#13551 = FACE_BOUND('',#13552,.F.); +#13552 = EDGE_LOOP('',(#13553,#13554,#13555,#13556)); +#13553 = ORIENTED_EDGE('',*,*,#13476,.T.); +#13554 = ORIENTED_EDGE('',*,*,#12662,.T.); +#13555 = ORIENTED_EDGE('',*,*,#12686,.F.); +#13556 = ORIENTED_EDGE('',*,*,#12719,.F.); +#13557 = FACE_BOUND('',#13558,.F.); +#13558 = EDGE_LOOP('',(#13559,#13569,#13577,#13585)); +#13559 = ORIENTED_EDGE('',*,*,#13560,.T.); +#13560 = EDGE_CURVE('',#13561,#13563,#13565,.T.); +#13561 = VERTEX_POINT('',#13562); +#13562 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#13563 = VERTEX_POINT('',#13564); +#13564 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#13565 = LINE('',#13566,#13567); +#13566 = CARTESIAN_POINT('',(2.82,0.25,0.3)); +#13567 = VECTOR('',#13568,1.); +#13568 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13569 = ORIENTED_EDGE('',*,*,#13570,.T.); +#13570 = EDGE_CURVE('',#13563,#13571,#13573,.T.); +#13571 = VERTEX_POINT('',#13572); +#13572 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#13573 = LINE('',#13574,#13575); +#13574 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#13575 = VECTOR('',#13576,1.); +#13576 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13577 = ORIENTED_EDGE('',*,*,#13578,.F.); +#13578 = EDGE_CURVE('',#13579,#13571,#13581,.T.); +#13579 = VERTEX_POINT('',#13580); +#13580 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#13581 = LINE('',#13582,#13583); +#13582 = CARTESIAN_POINT('',(2.18,0.25,0.3)); +#13583 = VECTOR('',#13584,1.); +#13584 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13585 = ORIENTED_EDGE('',*,*,#13586,.T.); +#13586 = EDGE_CURVE('',#13579,#13561,#13587,.T.); +#13587 = LINE('',#13588,#13589); +#13588 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#13589 = VECTOR('',#13590,1.); +#13590 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13591 = PLANE('',#13592); +#13592 = AXIS2_PLACEMENT_3D('',#13593,#13594,#13595); +#13593 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#13594 = DIRECTION('',(0.,0.,1.)); +#13595 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13596 = ADVANCED_FACE('',(#13597,#13603),#13637,.F.); +#13597 = FACE_BOUND('',#13598,.F.); +#13598 = EDGE_LOOP('',(#13599,#13600,#13601,#13602)); +#13599 = ORIENTED_EDGE('',*,*,#13459,.T.); +#13600 = ORIENTED_EDGE('',*,*,#12767,.T.); +#13601 = ORIENTED_EDGE('',*,*,#12791,.F.); +#13602 = ORIENTED_EDGE('',*,*,#12824,.F.); +#13603 = FACE_BOUND('',#13604,.F.); +#13604 = EDGE_LOOP('',(#13605,#13615,#13623,#13631)); +#13605 = ORIENTED_EDGE('',*,*,#13606,.F.); +#13606 = EDGE_CURVE('',#13607,#13609,#13611,.T.); +#13607 = VERTEX_POINT('',#13608); +#13608 = CARTESIAN_POINT('',(4.68,0.32,0.3)); +#13609 = VERTEX_POINT('',#13610); +#13610 = CARTESIAN_POINT('',(4.68,-0.32,0.3)); +#13611 = LINE('',#13612,#13613); +#13612 = CARTESIAN_POINT('',(4.68,0.25,0.3)); +#13613 = VECTOR('',#13614,1.); +#13614 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13615 = ORIENTED_EDGE('',*,*,#13616,.T.); +#13616 = EDGE_CURVE('',#13607,#13617,#13619,.T.); +#13617 = VERTEX_POINT('',#13618); +#13618 = CARTESIAN_POINT('',(5.32,0.32,0.3)); +#13619 = LINE('',#13620,#13621); +#13620 = CARTESIAN_POINT('',(5.535,0.32,0.3)); +#13621 = VECTOR('',#13622,1.); +#13622 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13623 = ORIENTED_EDGE('',*,*,#13624,.T.); +#13624 = EDGE_CURVE('',#13617,#13625,#13627,.T.); +#13625 = VERTEX_POINT('',#13626); +#13626 = CARTESIAN_POINT('',(5.32,-0.32,0.3)); +#13627 = LINE('',#13628,#13629); +#13628 = CARTESIAN_POINT('',(5.32,0.25,0.3)); +#13629 = VECTOR('',#13630,1.); +#13630 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13631 = ORIENTED_EDGE('',*,*,#13632,.T.); +#13632 = EDGE_CURVE('',#13625,#13609,#13633,.T.); +#13633 = LINE('',#13634,#13635); +#13634 = CARTESIAN_POINT('',(5.535,-0.32,0.3)); +#13635 = VECTOR('',#13636,1.); +#13636 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13637 = PLANE('',#13638); +#13638 = AXIS2_PLACEMENT_3D('',#13639,#13640,#13641); +#13639 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#13640 = DIRECTION('',(0.,0.,1.)); +#13641 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13642 = ADVANCED_FACE('',(#13643,#13649),#13683,.F.); +#13643 = FACE_BOUND('',#13644,.F.); +#13644 = EDGE_LOOP('',(#13645,#13646,#13647,#13648)); +#13645 = ORIENTED_EDGE('',*,*,#13442,.T.); +#13646 = ORIENTED_EDGE('',*,*,#12872,.T.); +#13647 = ORIENTED_EDGE('',*,*,#12896,.F.); +#13648 = ORIENTED_EDGE('',*,*,#12929,.F.); +#13649 = FACE_BOUND('',#13650,.F.); +#13650 = EDGE_LOOP('',(#13651,#13661,#13669,#13677)); +#13651 = ORIENTED_EDGE('',*,*,#13652,.T.); +#13652 = EDGE_CURVE('',#13653,#13655,#13657,.T.); +#13653 = VERTEX_POINT('',#13654); +#13654 = CARTESIAN_POINT('',(7.18,0.32,0.3)); +#13655 = VERTEX_POINT('',#13656); +#13656 = CARTESIAN_POINT('',(7.82,0.32,0.3)); +#13657 = LINE('',#13658,#13659); +#13658 = CARTESIAN_POINT('',(8.035,0.32,0.3)); +#13659 = VECTOR('',#13660,1.); +#13660 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13661 = ORIENTED_EDGE('',*,*,#13662,.T.); +#13662 = EDGE_CURVE('',#13655,#13663,#13665,.T.); +#13663 = VERTEX_POINT('',#13664); +#13664 = CARTESIAN_POINT('',(7.82,-0.32,0.3)); +#13665 = LINE('',#13666,#13667); +#13666 = CARTESIAN_POINT('',(7.82,0.26829700442,0.3)); +#13667 = VECTOR('',#13668,1.); +#13668 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13669 = ORIENTED_EDGE('',*,*,#13670,.T.); +#13670 = EDGE_CURVE('',#13663,#13671,#13673,.T.); +#13671 = VERTEX_POINT('',#13672); +#13672 = CARTESIAN_POINT('',(7.18,-0.32,0.3)); +#13673 = LINE('',#13674,#13675); +#13674 = CARTESIAN_POINT('',(8.035,-0.32,0.3)); +#13675 = VECTOR('',#13676,1.); +#13676 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13677 = ORIENTED_EDGE('',*,*,#13678,.F.); +#13678 = EDGE_CURVE('',#13653,#13671,#13679,.T.); +#13679 = LINE('',#13680,#13681); +#13680 = CARTESIAN_POINT('',(7.18,0.26829700442,0.3)); +#13681 = VECTOR('',#13682,1.); +#13682 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13683 = PLANE('',#13684); +#13684 = AXIS2_PLACEMENT_3D('',#13685,#13686,#13687); +#13685 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#13686 = DIRECTION('',(0.,0.,1.)); +#13687 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13688 = ADVANCED_FACE('',(#13689),#13714,.T.); +#13689 = FACE_BOUND('',#13690,.T.); +#13690 = EDGE_LOOP('',(#13691,#13692,#13700,#13708)); +#13691 = ORIENTED_EDGE('',*,*,#13048,.T.); +#13692 = ORIENTED_EDGE('',*,*,#13693,.T.); +#13693 = EDGE_CURVE('',#13051,#13694,#13696,.T.); +#13694 = VERTEX_POINT('',#13695); +#13695 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#13696 = LINE('',#13697,#13698); +#13697 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#13698 = VECTOR('',#13699,1.); +#13699 = DIRECTION('',(0.,0.,1.)); +#13700 = ORIENTED_EDGE('',*,*,#13701,.T.); +#13701 = EDGE_CURVE('',#13694,#13702,#13704,.T.); +#13702 = VERTEX_POINT('',#13703); +#13703 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#13704 = LINE('',#13705,#13706); +#13705 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#13706 = VECTOR('',#13707,1.); +#13707 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13708 = ORIENTED_EDGE('',*,*,#13709,.T.); +#13709 = EDGE_CURVE('',#13702,#13049,#13710,.T.); +#13710 = LINE('',#13711,#13712); +#13711 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#13712 = VECTOR('',#13713,1.); +#13713 = DIRECTION('',(-0.,0.,-1.)); +#13714 = PLANE('',#13715); +#13715 = AXIS2_PLACEMENT_3D('',#13716,#13717,#13718); +#13716 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#13717 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13718 = DIRECTION('',(0.,0.,1.)); +#13719 = ADVANCED_FACE('',(#13720),#13738,.F.); +#13720 = FACE_BOUND('',#13721,.F.); +#13721 = EDGE_LOOP('',(#13722,#13730,#13731,#13732)); +#13722 = ORIENTED_EDGE('',*,*,#13723,.F.); +#13723 = EDGE_CURVE('',#13067,#13724,#13726,.T.); +#13724 = VERTEX_POINT('',#13725); +#13725 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13726 = LINE('',#13727,#13728); +#13727 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13728 = VECTOR('',#13729,1.); +#13729 = DIRECTION('',(0.,0.,1.)); +#13730 = ORIENTED_EDGE('',*,*,#13074,.T.); +#13731 = ORIENTED_EDGE('',*,*,#13693,.T.); +#13732 = ORIENTED_EDGE('',*,*,#13733,.F.); +#13733 = EDGE_CURVE('',#13724,#13694,#13734,.T.); +#13734 = LINE('',#13735,#13736); +#13735 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13736 = VECTOR('',#13737,1.); +#13737 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13738 = PLANE('',#13739); +#13739 = AXIS2_PLACEMENT_3D('',#13740,#13741,#13742); +#13740 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#13741 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13742 = DIRECTION('',(0.,-0.,1.)); +#13743 = ADVANCED_FACE('',(#13744),#13762,.F.); +#13744 = FACE_BOUND('',#13745,.F.); +#13745 = EDGE_LOOP('',(#13746,#13747,#13748,#13756)); +#13746 = ORIENTED_EDGE('',*,*,#13066,.T.); +#13747 = ORIENTED_EDGE('',*,*,#13723,.T.); +#13748 = ORIENTED_EDGE('',*,*,#13749,.T.); +#13749 = EDGE_CURVE('',#13724,#13750,#13752,.T.); +#13750 = VERTEX_POINT('',#13751); +#13751 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#13752 = LINE('',#13753,#13754); +#13753 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#13754 = VECTOR('',#13755,1.); +#13755 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13756 = ORIENTED_EDGE('',*,*,#13757,.T.); +#13757 = EDGE_CURVE('',#13750,#13059,#13758,.T.); +#13758 = LINE('',#13759,#13760); +#13759 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13760 = VECTOR('',#13761,1.); +#13761 = DIRECTION('',(-0.,0.,-1.)); +#13762 = PLANE('',#13763); +#13763 = AXIS2_PLACEMENT_3D('',#13764,#13765,#13766); +#13764 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#13765 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13766 = DIRECTION('',(0.,0.,1.)); +#13767 = ADVANCED_FACE('',(#13768),#13779,.F.); +#13768 = FACE_BOUND('',#13769,.F.); +#13769 = EDGE_LOOP('',(#13770,#13771,#13777,#13778)); +#13770 = ORIENTED_EDGE('',*,*,#13757,.F.); +#13771 = ORIENTED_EDGE('',*,*,#13772,.T.); +#13772 = EDGE_CURVE('',#13750,#13702,#13773,.T.); +#13773 = LINE('',#13774,#13775); +#13774 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#13775 = VECTOR('',#13776,1.); +#13776 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13777 = ORIENTED_EDGE('',*,*,#13709,.T.); +#13778 = ORIENTED_EDGE('',*,*,#13058,.T.); +#13779 = PLANE('',#13780); +#13780 = AXIS2_PLACEMENT_3D('',#13781,#13782,#13783); +#13781 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#13782 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13783 = DIRECTION('',(-0.,0.,-1.)); +#13784 = ADVANCED_FACE('',(#13785),#13810,.F.); +#13785 = FACE_BOUND('',#13786,.F.); +#13786 = EDGE_LOOP('',(#13787,#13788,#13796,#13804)); +#13787 = ORIENTED_EDGE('',*,*,#13082,.T.); +#13788 = ORIENTED_EDGE('',*,*,#13789,.T.); +#13789 = EDGE_CURVE('',#13085,#13790,#13792,.T.); +#13790 = VERTEX_POINT('',#13791); +#13791 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13792 = LINE('',#13793,#13794); +#13793 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#13794 = VECTOR('',#13795,1.); +#13795 = DIRECTION('',(0.,0.,1.)); +#13796 = ORIENTED_EDGE('',*,*,#13797,.T.); +#13797 = EDGE_CURVE('',#13790,#13798,#13800,.T.); +#13798 = VERTEX_POINT('',#13799); +#13799 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#13800 = LINE('',#13801,#13802); +#13801 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13802 = VECTOR('',#13803,1.); +#13803 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13804 = ORIENTED_EDGE('',*,*,#13805,.T.); +#13805 = EDGE_CURVE('',#13798,#13083,#13806,.T.); +#13806 = LINE('',#13807,#13808); +#13807 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#13808 = VECTOR('',#13809,1.); +#13809 = DIRECTION('',(-0.,0.,-1.)); +#13810 = PLANE('',#13811); +#13811 = AXIS2_PLACEMENT_3D('',#13812,#13813,#13814); +#13812 = CARTESIAN_POINT('',(2.82,1.138921523207E-16,1.55)); +#13813 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13814 = DIRECTION('',(0.,0.,1.)); +#13815 = ADVANCED_FACE('',(#13816),#13834,.F.); +#13816 = FACE_BOUND('',#13817,.F.); +#13817 = EDGE_LOOP('',(#13818,#13819,#13827,#13833)); +#13818 = ORIENTED_EDGE('',*,*,#13805,.F.); +#13819 = ORIENTED_EDGE('',*,*,#13820,.T.); +#13820 = EDGE_CURVE('',#13798,#13821,#13823,.T.); +#13821 = VERTEX_POINT('',#13822); +#13822 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#13823 = LINE('',#13824,#13825); +#13824 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#13825 = VECTOR('',#13826,1.); +#13826 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13827 = ORIENTED_EDGE('',*,*,#13828,.T.); +#13828 = EDGE_CURVE('',#13821,#13101,#13829,.T.); +#13829 = LINE('',#13830,#13831); +#13830 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#13831 = VECTOR('',#13832,1.); +#13832 = DIRECTION('',(-0.,0.,-1.)); +#13833 = ORIENTED_EDGE('',*,*,#13108,.T.); +#13834 = PLANE('',#13835); +#13835 = AXIS2_PLACEMENT_3D('',#13836,#13837,#13838); +#13836 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#13837 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13838 = DIRECTION('',(-0.,0.,-1.)); +#13839 = ADVANCED_FACE('',(#13840),#13858,.T.); +#13840 = FACE_BOUND('',#13841,.T.); +#13841 = EDGE_LOOP('',(#13842,#13843,#13851,#13857)); +#13842 = ORIENTED_EDGE('',*,*,#13100,.T.); +#13843 = ORIENTED_EDGE('',*,*,#13844,.T.); +#13844 = EDGE_CURVE('',#13093,#13845,#13847,.T.); +#13845 = VERTEX_POINT('',#13846); +#13846 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#13847 = LINE('',#13848,#13849); +#13848 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#13849 = VECTOR('',#13850,1.); +#13850 = DIRECTION('',(0.,0.,1.)); +#13851 = ORIENTED_EDGE('',*,*,#13852,.T.); +#13852 = EDGE_CURVE('',#13845,#13821,#13853,.T.); +#13853 = LINE('',#13854,#13855); +#13854 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#13855 = VECTOR('',#13856,1.); +#13856 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13857 = ORIENTED_EDGE('',*,*,#13828,.T.); +#13858 = PLANE('',#13859); +#13859 = AXIS2_PLACEMENT_3D('',#13860,#13861,#13862); +#13860 = CARTESIAN_POINT('',(2.18,1.922695474661E-16,1.55)); +#13861 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13862 = DIRECTION('',(0.,0.,1.)); +#13863 = ADVANCED_FACE('',(#13864),#13875,.F.); +#13864 = FACE_BOUND('',#13865,.F.); +#13865 = EDGE_LOOP('',(#13866,#13867,#13868,#13869)); +#13866 = ORIENTED_EDGE('',*,*,#13789,.F.); +#13867 = ORIENTED_EDGE('',*,*,#13092,.T.); +#13868 = ORIENTED_EDGE('',*,*,#13844,.T.); +#13869 = ORIENTED_EDGE('',*,*,#13870,.F.); +#13870 = EDGE_CURVE('',#13790,#13845,#13871,.T.); +#13871 = LINE('',#13872,#13873); +#13872 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#13873 = VECTOR('',#13874,1.); +#13874 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13875 = PLANE('',#13876); +#13876 = AXIS2_PLACEMENT_3D('',#13877,#13878,#13879); +#13877 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#13878 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13879 = DIRECTION('',(0.,-0.,1.)); +#13880 = ADVANCED_FACE('',(#13881),#13906,.T.); +#13881 = FACE_BOUND('',#13882,.T.); +#13882 = EDGE_LOOP('',(#13883,#13884,#13892,#13900)); +#13883 = ORIENTED_EDGE('',*,*,#13116,.T.); +#13884 = ORIENTED_EDGE('',*,*,#13885,.T.); +#13885 = EDGE_CURVE('',#13119,#13886,#13888,.T.); +#13886 = VERTEX_POINT('',#13887); +#13887 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#13888 = LINE('',#13889,#13890); +#13889 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#13890 = VECTOR('',#13891,1.); +#13891 = DIRECTION('',(0.,0.,1.)); +#13892 = ORIENTED_EDGE('',*,*,#13893,.T.); +#13893 = EDGE_CURVE('',#13886,#13894,#13896,.T.); +#13894 = VERTEX_POINT('',#13895); +#13895 = CARTESIAN_POINT('',(4.68,0.32,6.3)); +#13896 = LINE('',#13897,#13898); +#13897 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#13898 = VECTOR('',#13899,1.); +#13899 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13900 = ORIENTED_EDGE('',*,*,#13901,.T.); +#13901 = EDGE_CURVE('',#13894,#13117,#13902,.T.); +#13902 = LINE('',#13903,#13904); +#13903 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#13904 = VECTOR('',#13905,1.); +#13905 = DIRECTION('',(-0.,0.,-1.)); +#13906 = PLANE('',#13907); +#13907 = AXIS2_PLACEMENT_3D('',#13908,#13909,#13910); +#13908 = CARTESIAN_POINT('',(4.68,-1.138921523207E-16,1.55)); +#13909 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13910 = DIRECTION('',(0.,0.,1.)); +#13911 = ADVANCED_FACE('',(#13912),#13930,.F.); +#13912 = FACE_BOUND('',#13913,.F.); +#13913 = EDGE_LOOP('',(#13914,#13922,#13923,#13924)); +#13914 = ORIENTED_EDGE('',*,*,#13915,.F.); +#13915 = EDGE_CURVE('',#13135,#13916,#13918,.T.); +#13916 = VERTEX_POINT('',#13917); +#13917 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#13918 = LINE('',#13919,#13920); +#13919 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#13920 = VECTOR('',#13921,1.); +#13921 = DIRECTION('',(0.,0.,1.)); +#13922 = ORIENTED_EDGE('',*,*,#13142,.T.); +#13923 = ORIENTED_EDGE('',*,*,#13885,.T.); +#13924 = ORIENTED_EDGE('',*,*,#13925,.F.); +#13925 = EDGE_CURVE('',#13916,#13886,#13926,.T.); +#13926 = LINE('',#13927,#13928); +#13927 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#13928 = VECTOR('',#13929,1.); +#13929 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13930 = PLANE('',#13931); +#13931 = AXIS2_PLACEMENT_3D('',#13932,#13933,#13934); +#13932 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#13933 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13934 = DIRECTION('',(0.,-0.,1.)); +#13935 = ADVANCED_FACE('',(#13936),#13954,.F.); +#13936 = FACE_BOUND('',#13937,.F.); +#13937 = EDGE_LOOP('',(#13938,#13939,#13940,#13948)); +#13938 = ORIENTED_EDGE('',*,*,#13134,.T.); +#13939 = ORIENTED_EDGE('',*,*,#13915,.T.); +#13940 = ORIENTED_EDGE('',*,*,#13941,.T.); +#13941 = EDGE_CURVE('',#13916,#13942,#13944,.T.); +#13942 = VERTEX_POINT('',#13943); +#13943 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#13944 = LINE('',#13945,#13946); +#13945 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#13946 = VECTOR('',#13947,1.); +#13947 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13948 = ORIENTED_EDGE('',*,*,#13949,.T.); +#13949 = EDGE_CURVE('',#13942,#13127,#13950,.T.); +#13950 = LINE('',#13951,#13952); +#13951 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#13952 = VECTOR('',#13953,1.); +#13953 = DIRECTION('',(-0.,0.,-1.)); +#13954 = PLANE('',#13955); +#13955 = AXIS2_PLACEMENT_3D('',#13956,#13957,#13958); +#13956 = CARTESIAN_POINT('',(5.32,-1.922695474661E-16,1.55)); +#13957 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13958 = DIRECTION('',(0.,0.,1.)); +#13959 = ADVANCED_FACE('',(#13960),#13971,.F.); +#13960 = FACE_BOUND('',#13961,.F.); +#13961 = EDGE_LOOP('',(#13962,#13963,#13969,#13970)); +#13962 = ORIENTED_EDGE('',*,*,#13949,.F.); +#13963 = ORIENTED_EDGE('',*,*,#13964,.T.); +#13964 = EDGE_CURVE('',#13942,#13894,#13965,.T.); +#13965 = LINE('',#13966,#13967); +#13966 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#13967 = VECTOR('',#13968,1.); +#13968 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13969 = ORIENTED_EDGE('',*,*,#13901,.T.); +#13970 = ORIENTED_EDGE('',*,*,#13126,.T.); +#13971 = PLANE('',#13972); +#13972 = AXIS2_PLACEMENT_3D('',#13973,#13974,#13975); +#13973 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#13974 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13975 = DIRECTION('',(-0.,0.,-1.)); +#13976 = ADVANCED_FACE('',(#13977),#14002,.F.); +#13977 = FACE_BOUND('',#13978,.F.); +#13978 = EDGE_LOOP('',(#13979,#13987,#13995,#14001)); +#13979 = ORIENTED_EDGE('',*,*,#13980,.F.); +#13980 = EDGE_CURVE('',#13981,#13153,#13983,.T.); +#13981 = VERTEX_POINT('',#13982); +#13982 = CARTESIAN_POINT('',(7.82,0.32,6.3)); +#13983 = LINE('',#13984,#13985); +#13984 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#13985 = VECTOR('',#13986,1.); +#13986 = DIRECTION('',(-0.,0.,-1.)); +#13987 = ORIENTED_EDGE('',*,*,#13988,.T.); +#13988 = EDGE_CURVE('',#13981,#13989,#13991,.T.); +#13989 = VERTEX_POINT('',#13990); +#13990 = CARTESIAN_POINT('',(7.18,0.32,6.3)); +#13991 = LINE('',#13992,#13993); +#13992 = CARTESIAN_POINT('',(7.82,0.32,6.3)); +#13993 = VECTOR('',#13994,1.); +#13994 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13995 = ORIENTED_EDGE('',*,*,#13996,.T.); +#13996 = EDGE_CURVE('',#13989,#13151,#13997,.T.); +#13997 = LINE('',#13998,#13999); +#13998 = CARTESIAN_POINT('',(7.18,0.32,6.5)); +#13999 = VECTOR('',#14000,1.); +#14000 = DIRECTION('',(-0.,0.,-1.)); +#14001 = ORIENTED_EDGE('',*,*,#13150,.T.); +#14002 = PLANE('',#14003); +#14003 = AXIS2_PLACEMENT_3D('',#14004,#14005,#14006); +#14004 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#14005 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14006 = DIRECTION('',(-0.,0.,-1.)); +#14007 = ADVANCED_FACE('',(#14008),#14026,.T.); +#14008 = FACE_BOUND('',#14009,.T.); +#14009 = EDGE_LOOP('',(#14010,#14011,#14019,#14025)); +#14010 = ORIENTED_EDGE('',*,*,#13176,.T.); +#14011 = ORIENTED_EDGE('',*,*,#14012,.T.); +#14012 = EDGE_CURVE('',#13169,#14013,#14015,.T.); +#14013 = VERTEX_POINT('',#14014); +#14014 = CARTESIAN_POINT('',(7.18,-0.32,6.3)); +#14015 = LINE('',#14016,#14017); +#14016 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#14017 = VECTOR('',#14018,1.); +#14018 = DIRECTION('',(0.,0.,1.)); +#14019 = ORIENTED_EDGE('',*,*,#14020,.T.); +#14020 = EDGE_CURVE('',#14013,#13989,#14021,.T.); +#14021 = LINE('',#14022,#14023); +#14022 = CARTESIAN_POINT('',(7.18,-0.32,6.3)); +#14023 = VECTOR('',#14024,1.); +#14024 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14025 = ORIENTED_EDGE('',*,*,#13996,.T.); +#14026 = PLANE('',#14027); +#14027 = AXIS2_PLACEMENT_3D('',#14028,#14029,#14030); +#14028 = CARTESIAN_POINT('',(7.18,3.65940088399E-02,1.522832428212)); +#14029 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14030 = DIRECTION('',(0.,0.,1.)); +#14031 = ADVANCED_FACE('',(#14032),#14050,.F.); +#14032 = FACE_BOUND('',#14033,.F.); +#14033 = EDGE_LOOP('',(#14034,#14042,#14043,#14044)); +#14034 = ORIENTED_EDGE('',*,*,#14035,.F.); +#14035 = EDGE_CURVE('',#13161,#14036,#14038,.T.); +#14036 = VERTEX_POINT('',#14037); +#14037 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#14038 = LINE('',#14039,#14040); +#14039 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#14040 = VECTOR('',#14041,1.); +#14041 = DIRECTION('',(0.,0.,1.)); +#14042 = ORIENTED_EDGE('',*,*,#13168,.T.); +#14043 = ORIENTED_EDGE('',*,*,#14012,.T.); +#14044 = ORIENTED_EDGE('',*,*,#14045,.F.); +#14045 = EDGE_CURVE('',#14036,#14013,#14046,.T.); +#14046 = LINE('',#14047,#14048); +#14047 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#14048 = VECTOR('',#14049,1.); +#14049 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14050 = PLANE('',#14051); +#14051 = AXIS2_PLACEMENT_3D('',#14052,#14053,#14054); +#14052 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#14053 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14054 = DIRECTION('',(0.,-0.,1.)); +#14055 = ADVANCED_FACE('',(#14056),#14067,.F.); +#14056 = FACE_BOUND('',#14057,.F.); +#14057 = EDGE_LOOP('',(#14058,#14059,#14060,#14066)); +#14058 = ORIENTED_EDGE('',*,*,#13160,.T.); +#14059 = ORIENTED_EDGE('',*,*,#14035,.T.); +#14060 = ORIENTED_EDGE('',*,*,#14061,.T.); +#14061 = EDGE_CURVE('',#14036,#13981,#14062,.T.); +#14062 = LINE('',#14063,#14064); +#14063 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#14064 = VECTOR('',#14065,1.); +#14065 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14066 = ORIENTED_EDGE('',*,*,#13980,.T.); +#14067 = PLANE('',#14068); +#14068 = AXIS2_PLACEMENT_3D('',#14069,#14070,#14071); +#14069 = CARTESIAN_POINT('',(7.82,3.65940088399E-02,1.522832428212)); +#14070 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14071 = DIRECTION('',(0.,0.,1.)); +#14072 = ADVANCED_FACE('',(#14073),#14130,.T.); +#14073 = FACE_BOUND('',#14074,.T.); +#14074 = EDGE_LOOP('',(#14075,#14085,#14093,#14101,#14107,#14108,#14116, + #14124)); +#14075 = ORIENTED_EDGE('',*,*,#14076,.T.); +#14076 = EDGE_CURVE('',#14077,#14079,#14081,.T.); +#14077 = VERTEX_POINT('',#14078); +#14078 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#14079 = VERTEX_POINT('',#14080); +#14080 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#14081 = LINE('',#14082,#14083); +#14082 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#14083 = VECTOR('',#14084,1.); +#14084 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14085 = ORIENTED_EDGE('',*,*,#14086,.T.); +#14086 = EDGE_CURVE('',#14079,#14087,#14089,.T.); +#14087 = VERTEX_POINT('',#14088); +#14088 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#14089 = LINE('',#14090,#14091); +#14090 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#14091 = VECTOR('',#14092,1.); +#14092 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14093 = ORIENTED_EDGE('',*,*,#14094,.T.); +#14094 = EDGE_CURVE('',#14087,#14095,#14097,.T.); +#14095 = VERTEX_POINT('',#14096); +#14096 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#14097 = LINE('',#14098,#14099); +#14098 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#14099 = VECTOR('',#14100,1.); +#14100 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14101 = ORIENTED_EDGE('',*,*,#14102,.T.); +#14102 = EDGE_CURVE('',#14095,#13517,#14103,.T.); +#14103 = LINE('',#14104,#14105); +#14104 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#14105 = VECTOR('',#14106,1.); +#14106 = DIRECTION('',(0.,0.,1.)); +#14107 = ORIENTED_EDGE('',*,*,#13514,.F.); +#14108 = ORIENTED_EDGE('',*,*,#14109,.T.); +#14109 = EDGE_CURVE('',#13515,#14110,#14112,.T.); +#14110 = VERTEX_POINT('',#14111); +#14111 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#14112 = LINE('',#14113,#14114); +#14113 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#14114 = VECTOR('',#14115,1.); +#14115 = DIRECTION('',(-0.,0.,-1.)); +#14116 = ORIENTED_EDGE('',*,*,#14117,.T.); +#14117 = EDGE_CURVE('',#14110,#14118,#14120,.T.); +#14118 = VERTEX_POINT('',#14119); +#14119 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#14120 = LINE('',#14121,#14122); +#14121 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#14122 = VECTOR('',#14123,1.); +#14123 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14124 = ORIENTED_EDGE('',*,*,#14125,.T.); +#14125 = EDGE_CURVE('',#14118,#14077,#14126,.T.); +#14126 = LINE('',#14127,#14128); +#14127 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#14128 = VECTOR('',#14129,1.); +#14129 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14130 = PLANE('',#14131); +#14131 = AXIS2_PLACEMENT_3D('',#14132,#14133,#14134); +#14132 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#14133 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14134 = DIRECTION('',(0.,0.,1.)); +#14135 = ADVANCED_FACE('',(#14136),#14154,.F.); +#14136 = FACE_BOUND('',#14137,.F.); +#14137 = EDGE_LOOP('',(#14138,#14146,#14152,#14153)); +#14138 = ORIENTED_EDGE('',*,*,#14139,.F.); +#14139 = EDGE_CURVE('',#14140,#13533,#14142,.T.); +#14140 = VERTEX_POINT('',#14141); +#14141 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#14142 = LINE('',#14143,#14144); +#14143 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#14144 = VECTOR('',#14145,1.); +#14145 = DIRECTION('',(0.,0.,1.)); +#14146 = ORIENTED_EDGE('',*,*,#14147,.T.); +#14147 = EDGE_CURVE('',#14140,#14095,#14148,.T.); +#14148 = LINE('',#14149,#14150); +#14149 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#14150 = VECTOR('',#14151,1.); +#14151 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14152 = ORIENTED_EDGE('',*,*,#14102,.T.); +#14153 = ORIENTED_EDGE('',*,*,#13540,.F.); +#14154 = PLANE('',#14155); +#14155 = AXIS2_PLACEMENT_3D('',#14156,#14157,#14158); +#14156 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#14157 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14158 = DIRECTION('',(0.,-0.,1.)); +#14159 = ADVANCED_FACE('',(#14160),#14210,.F.); +#14160 = FACE_BOUND('',#14161,.F.); +#14161 = EDGE_LOOP('',(#14162,#14172,#14180,#14186,#14187,#14188,#14196, + #14204)); +#14162 = ORIENTED_EDGE('',*,*,#14163,.T.); +#14163 = EDGE_CURVE('',#14164,#14166,#14168,.T.); +#14164 = VERTEX_POINT('',#14165); +#14165 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#14166 = VERTEX_POINT('',#14167); +#14167 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#14168 = LINE('',#14169,#14170); +#14169 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#14170 = VECTOR('',#14171,1.); +#14171 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14172 = ORIENTED_EDGE('',*,*,#14173,.T.); +#14173 = EDGE_CURVE('',#14166,#14174,#14176,.T.); +#14174 = VERTEX_POINT('',#14175); +#14175 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#14176 = LINE('',#14177,#14178); +#14177 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#14178 = VECTOR('',#14179,1.); +#14179 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14180 = ORIENTED_EDGE('',*,*,#14181,.T.); +#14181 = EDGE_CURVE('',#14174,#14140,#14182,.T.); +#14182 = LINE('',#14183,#14184); +#14183 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#14184 = VECTOR('',#14185,1.); +#14185 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14186 = ORIENTED_EDGE('',*,*,#14139,.T.); +#14187 = ORIENTED_EDGE('',*,*,#13532,.F.); +#14188 = ORIENTED_EDGE('',*,*,#14189,.T.); +#14189 = EDGE_CURVE('',#13525,#14190,#14192,.T.); +#14190 = VERTEX_POINT('',#14191); +#14191 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#14192 = LINE('',#14193,#14194); +#14193 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#14194 = VECTOR('',#14195,1.); +#14195 = DIRECTION('',(-0.,0.,-1.)); +#14196 = ORIENTED_EDGE('',*,*,#14197,.T.); +#14197 = EDGE_CURVE('',#14190,#14198,#14200,.T.); +#14198 = VERTEX_POINT('',#14199); +#14199 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#14200 = LINE('',#14201,#14202); +#14201 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#14202 = VECTOR('',#14203,1.); +#14203 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14204 = ORIENTED_EDGE('',*,*,#14205,.T.); +#14205 = EDGE_CURVE('',#14198,#14164,#14206,.T.); +#14206 = LINE('',#14207,#14208); +#14207 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#14208 = VECTOR('',#14209,1.); +#14209 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14210 = PLANE('',#14211); +#14211 = AXIS2_PLACEMENT_3D('',#14212,#14213,#14214); +#14212 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#14213 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14214 = DIRECTION('',(0.,0.,1.)); +#14215 = ADVANCED_FACE('',(#14216),#14227,.F.); +#14216 = FACE_BOUND('',#14217,.F.); +#14217 = EDGE_LOOP('',(#14218,#14219,#14220,#14221)); +#14218 = ORIENTED_EDGE('',*,*,#14189,.F.); +#14219 = ORIENTED_EDGE('',*,*,#13524,.F.); +#14220 = ORIENTED_EDGE('',*,*,#14109,.T.); +#14221 = ORIENTED_EDGE('',*,*,#14222,.F.); +#14222 = EDGE_CURVE('',#14190,#14110,#14223,.T.); +#14223 = LINE('',#14224,#14225); +#14224 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#14225 = VECTOR('',#14226,1.); +#14226 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14227 = PLANE('',#14228); +#14228 = AXIS2_PLACEMENT_3D('',#14229,#14230,#14231); +#14229 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#14230 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14231 = DIRECTION('',(-0.,0.,-1.)); +#14232 = ADVANCED_FACE('',(#14233),#14258,.F.); +#14233 = FACE_BOUND('',#14234,.F.); +#14234 = EDGE_LOOP('',(#14235,#14245,#14251,#14252)); +#14235 = ORIENTED_EDGE('',*,*,#14236,.T.); +#14236 = EDGE_CURVE('',#14237,#14239,#14241,.T.); +#14237 = VERTEX_POINT('',#14238); +#14238 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#14239 = VERTEX_POINT('',#14240); +#14240 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#14241 = LINE('',#14242,#14243); +#14242 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#14243 = VECTOR('',#14244,1.); +#14244 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14245 = ORIENTED_EDGE('',*,*,#14246,.T.); +#14246 = EDGE_CURVE('',#14239,#13563,#14247,.T.); +#14247 = LINE('',#14248,#14249); +#14248 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#14249 = VECTOR('',#14250,1.); +#14250 = DIRECTION('',(0.,0.,1.)); +#14251 = ORIENTED_EDGE('',*,*,#13560,.F.); +#14252 = ORIENTED_EDGE('',*,*,#14253,.T.); +#14253 = EDGE_CURVE('',#13561,#14237,#14254,.T.); +#14254 = LINE('',#14255,#14256); +#14255 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#14256 = VECTOR('',#14257,1.); +#14257 = DIRECTION('',(-0.,0.,-1.)); +#14258 = PLANE('',#14259); +#14259 = AXIS2_PLACEMENT_3D('',#14260,#14261,#14262); +#14260 = CARTESIAN_POINT('',(2.82,1.138921523207E-16,1.55)); +#14261 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14262 = DIRECTION('',(0.,0.,1.)); +#14263 = ADVANCED_FACE('',(#14264),#14282,.F.); +#14264 = FACE_BOUND('',#14265,.F.); +#14265 = EDGE_LOOP('',(#14266,#14267,#14268,#14276)); +#14266 = ORIENTED_EDGE('',*,*,#14253,.F.); +#14267 = ORIENTED_EDGE('',*,*,#13586,.F.); +#14268 = ORIENTED_EDGE('',*,*,#14269,.T.); +#14269 = EDGE_CURVE('',#13579,#14270,#14272,.T.); +#14270 = VERTEX_POINT('',#14271); +#14271 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#14272 = LINE('',#14273,#14274); +#14273 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#14274 = VECTOR('',#14275,1.); +#14275 = DIRECTION('',(-0.,0.,-1.)); +#14276 = ORIENTED_EDGE('',*,*,#14277,.F.); +#14277 = EDGE_CURVE('',#14237,#14270,#14278,.T.); +#14278 = LINE('',#14279,#14280); +#14279 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#14280 = VECTOR('',#14281,1.); +#14281 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14282 = PLANE('',#14283); +#14283 = AXIS2_PLACEMENT_3D('',#14284,#14285,#14286); +#14284 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#14285 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14286 = DIRECTION('',(-0.,0.,-1.)); +#14287 = ADVANCED_FACE('',(#14288),#14306,.T.); +#14288 = FACE_BOUND('',#14289,.T.); +#14289 = EDGE_LOOP('',(#14290,#14298,#14304,#14305)); +#14290 = ORIENTED_EDGE('',*,*,#14291,.T.); +#14291 = EDGE_CURVE('',#14270,#14292,#14294,.T.); +#14292 = VERTEX_POINT('',#14293); +#14293 = CARTESIAN_POINT('',(2.18,-0.32,-3.2)); +#14294 = LINE('',#14295,#14296); +#14295 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#14296 = VECTOR('',#14297,1.); +#14297 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14298 = ORIENTED_EDGE('',*,*,#14299,.T.); +#14299 = EDGE_CURVE('',#14292,#13571,#14300,.T.); +#14300 = LINE('',#14301,#14302); +#14301 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#14302 = VECTOR('',#14303,1.); +#14303 = DIRECTION('',(0.,0.,1.)); +#14304 = ORIENTED_EDGE('',*,*,#13578,.F.); +#14305 = ORIENTED_EDGE('',*,*,#14269,.T.); +#14306 = PLANE('',#14307); +#14307 = AXIS2_PLACEMENT_3D('',#14308,#14309,#14310); +#14308 = CARTESIAN_POINT('',(2.18,1.922695474661E-16,1.55)); +#14309 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14310 = DIRECTION('',(0.,0.,1.)); +#14311 = ADVANCED_FACE('',(#14312),#14323,.F.); +#14312 = FACE_BOUND('',#14313,.F.); +#14313 = EDGE_LOOP('',(#14314,#14315,#14321,#14322)); +#14314 = ORIENTED_EDGE('',*,*,#14246,.F.); +#14315 = ORIENTED_EDGE('',*,*,#14316,.T.); +#14316 = EDGE_CURVE('',#14239,#14292,#14317,.T.); +#14317 = LINE('',#14318,#14319); +#14318 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#14319 = VECTOR('',#14320,1.); +#14320 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14321 = ORIENTED_EDGE('',*,*,#14299,.T.); +#14322 = ORIENTED_EDGE('',*,*,#13570,.F.); +#14323 = PLANE('',#14324); +#14324 = AXIS2_PLACEMENT_3D('',#14325,#14326,#14327); +#14325 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#14326 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14327 = DIRECTION('',(0.,-0.,1.)); +#14328 = ADVANCED_FACE('',(#14329),#14354,.T.); +#14329 = FACE_BOUND('',#14330,.T.); +#14330 = EDGE_LOOP('',(#14331,#14341,#14347,#14348)); +#14331 = ORIENTED_EDGE('',*,*,#14332,.T.); +#14332 = EDGE_CURVE('',#14333,#14335,#14337,.T.); +#14333 = VERTEX_POINT('',#14334); +#14334 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#14335 = VERTEX_POINT('',#14336); +#14336 = CARTESIAN_POINT('',(4.68,-0.32,-3.2)); +#14337 = LINE('',#14338,#14339); +#14338 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#14339 = VECTOR('',#14340,1.); +#14340 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14341 = ORIENTED_EDGE('',*,*,#14342,.T.); +#14342 = EDGE_CURVE('',#14335,#13609,#14343,.T.); +#14343 = LINE('',#14344,#14345); +#14344 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#14345 = VECTOR('',#14346,1.); +#14346 = DIRECTION('',(0.,0.,1.)); +#14347 = ORIENTED_EDGE('',*,*,#13606,.F.); +#14348 = ORIENTED_EDGE('',*,*,#14349,.T.); +#14349 = EDGE_CURVE('',#13607,#14333,#14350,.T.); +#14350 = LINE('',#14351,#14352); +#14351 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#14352 = VECTOR('',#14353,1.); +#14353 = DIRECTION('',(-0.,0.,-1.)); +#14354 = PLANE('',#14355); +#14355 = AXIS2_PLACEMENT_3D('',#14356,#14357,#14358); +#14356 = CARTESIAN_POINT('',(4.68,-1.138921523207E-16,1.55)); +#14357 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14358 = DIRECTION('',(0.,0.,1.)); +#14359 = ADVANCED_FACE('',(#14360),#14378,.F.); +#14360 = FACE_BOUND('',#14361,.F.); +#14361 = EDGE_LOOP('',(#14362,#14370,#14376,#14377)); +#14362 = ORIENTED_EDGE('',*,*,#14363,.F.); +#14363 = EDGE_CURVE('',#14364,#13625,#14366,.T.); +#14364 = VERTEX_POINT('',#14365); +#14365 = CARTESIAN_POINT('',(5.32,-0.32,-3.2)); +#14366 = LINE('',#14367,#14368); +#14367 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#14368 = VECTOR('',#14369,1.); +#14369 = DIRECTION('',(0.,0.,1.)); +#14370 = ORIENTED_EDGE('',*,*,#14371,.T.); +#14371 = EDGE_CURVE('',#14364,#14335,#14372,.T.); +#14372 = LINE('',#14373,#14374); +#14373 = CARTESIAN_POINT('',(5.32,-0.32,-3.2)); +#14374 = VECTOR('',#14375,1.); +#14375 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14376 = ORIENTED_EDGE('',*,*,#14342,.T.); +#14377 = ORIENTED_EDGE('',*,*,#13632,.F.); +#14378 = PLANE('',#14379); +#14379 = AXIS2_PLACEMENT_3D('',#14380,#14381,#14382); +#14380 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#14381 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14382 = DIRECTION('',(0.,-0.,1.)); +#14383 = ADVANCED_FACE('',(#14384),#14402,.F.); +#14384 = FACE_BOUND('',#14385,.F.); +#14385 = EDGE_LOOP('',(#14386,#14394,#14395,#14396)); +#14386 = ORIENTED_EDGE('',*,*,#14387,.T.); +#14387 = EDGE_CURVE('',#14388,#14364,#14390,.T.); +#14388 = VERTEX_POINT('',#14389); +#14389 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#14390 = LINE('',#14391,#14392); +#14391 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#14392 = VECTOR('',#14393,1.); +#14393 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14394 = ORIENTED_EDGE('',*,*,#14363,.T.); +#14395 = ORIENTED_EDGE('',*,*,#13624,.F.); +#14396 = ORIENTED_EDGE('',*,*,#14397,.T.); +#14397 = EDGE_CURVE('',#13617,#14388,#14398,.T.); +#14398 = LINE('',#14399,#14400); +#14399 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#14400 = VECTOR('',#14401,1.); +#14401 = DIRECTION('',(-0.,0.,-1.)); +#14402 = PLANE('',#14403); +#14403 = AXIS2_PLACEMENT_3D('',#14404,#14405,#14406); +#14404 = CARTESIAN_POINT('',(5.32,-1.922695474661E-16,1.55)); +#14405 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14406 = DIRECTION('',(0.,0.,1.)); +#14407 = ADVANCED_FACE('',(#14408),#14419,.F.); +#14408 = FACE_BOUND('',#14409,.F.); +#14409 = EDGE_LOOP('',(#14410,#14411,#14412,#14413)); +#14410 = ORIENTED_EDGE('',*,*,#14397,.F.); +#14411 = ORIENTED_EDGE('',*,*,#13616,.F.); +#14412 = ORIENTED_EDGE('',*,*,#14349,.T.); +#14413 = ORIENTED_EDGE('',*,*,#14414,.F.); +#14414 = EDGE_CURVE('',#14388,#14333,#14415,.T.); +#14415 = LINE('',#14416,#14417); +#14416 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#14417 = VECTOR('',#14418,1.); +#14418 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14419 = PLANE('',#14420); +#14420 = AXIS2_PLACEMENT_3D('',#14421,#14422,#14423); +#14421 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#14422 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14423 = DIRECTION('',(-0.,0.,-1.)); +#14424 = ADVANCED_FACE('',(#14425),#14450,.F.); +#14425 = FACE_BOUND('',#14426,.F.); +#14426 = EDGE_LOOP('',(#14427,#14435,#14436,#14444)); +#14427 = ORIENTED_EDGE('',*,*,#14428,.F.); +#14428 = EDGE_CURVE('',#13655,#14429,#14431,.T.); +#14429 = VERTEX_POINT('',#14430); +#14430 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#14431 = LINE('',#14432,#14433); +#14432 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#14433 = VECTOR('',#14434,1.); +#14434 = DIRECTION('',(-0.,0.,-1.)); +#14435 = ORIENTED_EDGE('',*,*,#13652,.F.); +#14436 = ORIENTED_EDGE('',*,*,#14437,.T.); +#14437 = EDGE_CURVE('',#13653,#14438,#14440,.T.); +#14438 = VERTEX_POINT('',#14439); +#14439 = CARTESIAN_POINT('',(7.18,0.32,-0.9)); +#14440 = LINE('',#14441,#14442); +#14441 = CARTESIAN_POINT('',(7.18,0.32,6.5)); +#14442 = VECTOR('',#14443,1.); +#14443 = DIRECTION('',(-0.,0.,-1.)); +#14444 = ORIENTED_EDGE('',*,*,#14445,.F.); +#14445 = EDGE_CURVE('',#14429,#14438,#14446,.T.); +#14446 = LINE('',#14447,#14448); +#14447 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#14448 = VECTOR('',#14449,1.); +#14449 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14450 = PLANE('',#14451); +#14451 = AXIS2_PLACEMENT_3D('',#14452,#14453,#14454); +#14452 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#14453 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14454 = DIRECTION('',(-0.,0.,-1.)); +#14455 = ADVANCED_FACE('',(#14456),#14506,.T.); +#14456 = FACE_BOUND('',#14457,.T.); +#14457 = EDGE_LOOP('',(#14458,#14468,#14476,#14484,#14490,#14491,#14492, + #14500)); +#14458 = ORIENTED_EDGE('',*,*,#14459,.T.); +#14459 = EDGE_CURVE('',#14460,#14462,#14464,.T.); +#14460 = VERTEX_POINT('',#14461); +#14461 = CARTESIAN_POINT('',(7.18,0.351578947368,-3.2)); +#14462 = VERTEX_POINT('',#14463); +#14463 = CARTESIAN_POINT('',(7.18,-0.288421052632,-3.2)); +#14464 = LINE('',#14465,#14466); +#14465 = CARTESIAN_POINT('',(7.18,0.32,-3.2)); +#14466 = VECTOR('',#14467,1.); +#14467 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14468 = ORIENTED_EDGE('',*,*,#14469,.T.); +#14469 = EDGE_CURVE('',#14462,#14470,#14472,.T.); +#14470 = VERTEX_POINT('',#14471); +#14471 = CARTESIAN_POINT('',(7.18,-2.E-02,-1.5)); +#14472 = LINE('',#14473,#14474); +#14473 = CARTESIAN_POINT('',(7.18,-0.32,-3.4)); +#14474 = VECTOR('',#14475,1.); +#14475 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14476 = ORIENTED_EDGE('',*,*,#14477,.T.); +#14477 = EDGE_CURVE('',#14470,#14478,#14480,.T.); +#14478 = VERTEX_POINT('',#14479); +#14479 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#14480 = LINE('',#14481,#14482); +#14481 = CARTESIAN_POINT('',(7.18,-2.E-02,-1.5)); +#14482 = VECTOR('',#14483,1.); +#14483 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14484 = ORIENTED_EDGE('',*,*,#14485,.T.); +#14485 = EDGE_CURVE('',#14478,#13671,#14486,.T.); +#14486 = LINE('',#14487,#14488); +#14487 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#14488 = VECTOR('',#14489,1.); +#14489 = DIRECTION('',(0.,0.,1.)); +#14490 = ORIENTED_EDGE('',*,*,#13678,.F.); +#14491 = ORIENTED_EDGE('',*,*,#14437,.T.); +#14492 = ORIENTED_EDGE('',*,*,#14493,.T.); +#14493 = EDGE_CURVE('',#14438,#14494,#14496,.T.); +#14494 = VERTEX_POINT('',#14495); +#14495 = CARTESIAN_POINT('',(7.18,0.62,-1.5)); +#14496 = LINE('',#14497,#14498); +#14497 = CARTESIAN_POINT('',(7.18,0.32,-0.9)); +#14498 = VECTOR('',#14499,1.); +#14499 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14500 = ORIENTED_EDGE('',*,*,#14501,.T.); +#14501 = EDGE_CURVE('',#14494,#14460,#14502,.T.); +#14502 = LINE('',#14503,#14504); +#14503 = CARTESIAN_POINT('',(7.18,0.62,-1.5)); +#14504 = VECTOR('',#14505,1.); +#14505 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14506 = PLANE('',#14507); +#14507 = AXIS2_PLACEMENT_3D('',#14508,#14509,#14510); +#14508 = CARTESIAN_POINT('',(7.18,3.65940088399E-02,1.522832428212)); +#14509 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14510 = DIRECTION('',(0.,0.,1.)); +#14511 = ADVANCED_FACE('',(#14512),#14530,.F.); +#14512 = FACE_BOUND('',#14513,.F.); +#14513 = EDGE_LOOP('',(#14514,#14522,#14528,#14529)); +#14514 = ORIENTED_EDGE('',*,*,#14515,.F.); +#14515 = EDGE_CURVE('',#14516,#13663,#14518,.T.); +#14516 = VERTEX_POINT('',#14517); +#14517 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#14518 = LINE('',#14519,#14520); +#14519 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#14520 = VECTOR('',#14521,1.); +#14521 = DIRECTION('',(0.,0.,1.)); +#14522 = ORIENTED_EDGE('',*,*,#14523,.T.); +#14523 = EDGE_CURVE('',#14516,#14478,#14524,.T.); +#14524 = LINE('',#14525,#14526); +#14525 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#14526 = VECTOR('',#14527,1.); +#14527 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14528 = ORIENTED_EDGE('',*,*,#14485,.T.); +#14529 = ORIENTED_EDGE('',*,*,#13670,.F.); +#14530 = PLANE('',#14531); +#14531 = AXIS2_PLACEMENT_3D('',#14532,#14533,#14534); +#14532 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#14533 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14534 = DIRECTION('',(0.,-0.,1.)); +#14535 = ADVANCED_FACE('',(#14536),#14579,.F.); +#14536 = FACE_BOUND('',#14537,.F.); +#14537 = EDGE_LOOP('',(#14538,#14548,#14556,#14562,#14563,#14564,#14565, + #14573)); +#14538 = ORIENTED_EDGE('',*,*,#14539,.T.); +#14539 = EDGE_CURVE('',#14540,#14542,#14544,.T.); +#14540 = VERTEX_POINT('',#14541); +#14541 = CARTESIAN_POINT('',(7.82,0.351578947368,-3.2)); +#14542 = VERTEX_POINT('',#14543); +#14543 = CARTESIAN_POINT('',(7.82,-0.288421052632,-3.2)); +#14544 = LINE('',#14545,#14546); +#14545 = CARTESIAN_POINT('',(7.82,0.32,-3.2)); +#14546 = VECTOR('',#14547,1.); +#14547 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14548 = ORIENTED_EDGE('',*,*,#14549,.T.); +#14549 = EDGE_CURVE('',#14542,#14550,#14552,.T.); +#14550 = VERTEX_POINT('',#14551); +#14551 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#14552 = LINE('',#14553,#14554); +#14553 = CARTESIAN_POINT('',(7.82,-0.32,-3.4)); +#14554 = VECTOR('',#14555,1.); +#14555 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#14556 = ORIENTED_EDGE('',*,*,#14557,.T.); +#14557 = EDGE_CURVE('',#14550,#14516,#14558,.T.); +#14558 = LINE('',#14559,#14560); +#14559 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#14560 = VECTOR('',#14561,1.); +#14561 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#14562 = ORIENTED_EDGE('',*,*,#14515,.T.); +#14563 = ORIENTED_EDGE('',*,*,#13662,.F.); +#14564 = ORIENTED_EDGE('',*,*,#14428,.T.); +#14565 = ORIENTED_EDGE('',*,*,#14566,.T.); +#14566 = EDGE_CURVE('',#14429,#14567,#14569,.T.); +#14567 = VERTEX_POINT('',#14568); +#14568 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#14569 = LINE('',#14570,#14571); +#14570 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#14571 = VECTOR('',#14572,1.); +#14572 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#14573 = ORIENTED_EDGE('',*,*,#14574,.T.); +#14574 = EDGE_CURVE('',#14567,#14540,#14575,.T.); +#14575 = LINE('',#14576,#14577); +#14576 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#14577 = VECTOR('',#14578,1.); +#14578 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#14579 = PLANE('',#14580); +#14580 = AXIS2_PLACEMENT_3D('',#14581,#14582,#14583); +#14581 = CARTESIAN_POINT('',(7.82,3.65940088399E-02,1.522832428212)); +#14582 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14583 = DIRECTION('',(0.,0.,1.)); +#14584 = ADVANCED_FACE('',(#14585),#14610,.F.); +#14585 = FACE_BOUND('',#14586,.T.); +#14586 = EDGE_LOOP('',(#14587,#14595,#14603,#14609)); +#14587 = ORIENTED_EDGE('',*,*,#14588,.F.); +#14588 = EDGE_CURVE('',#14589,#13694,#14591,.T.); +#14589 = VERTEX_POINT('',#14590); +#14590 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#14591 = LINE('',#14592,#14593); +#14592 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#14593 = VECTOR('',#14594,1.); +#14594 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#14595 = ORIENTED_EDGE('',*,*,#14596,.T.); +#14596 = EDGE_CURVE('',#14589,#14597,#14599,.T.); +#14597 = VERTEX_POINT('',#14598); +#14598 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#14599 = LINE('',#14600,#14601); +#14600 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#14601 = VECTOR('',#14602,1.); +#14602 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14603 = ORIENTED_EDGE('',*,*,#14604,.T.); +#14604 = EDGE_CURVE('',#14597,#13702,#14605,.T.); +#14605 = LINE('',#14606,#14607); +#14606 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#14607 = VECTOR('',#14608,1.); +#14608 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#14609 = ORIENTED_EDGE('',*,*,#13701,.F.); +#14610 = PLANE('',#14611); +#14611 = AXIS2_PLACEMENT_3D('',#14612,#14613,#14614); +#14612 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#14613 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14614 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#14615 = ADVANCED_FACE('',(#14616),#14634,.T.); +#14616 = FACE_BOUND('',#14617,.F.); +#14617 = EDGE_LOOP('',(#14618,#14626,#14627,#14628)); +#14618 = ORIENTED_EDGE('',*,*,#14619,.F.); +#14619 = EDGE_CURVE('',#13724,#14620,#14622,.T.); +#14620 = VERTEX_POINT('',#14621); +#14621 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#14622 = LINE('',#14623,#14624); +#14623 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#14624 = VECTOR('',#14625,1.); +#14625 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#14626 = ORIENTED_EDGE('',*,*,#13733,.T.); +#14627 = ORIENTED_EDGE('',*,*,#14588,.F.); +#14628 = ORIENTED_EDGE('',*,*,#14629,.F.); +#14629 = EDGE_CURVE('',#14620,#14589,#14630,.T.); +#14630 = LINE('',#14631,#14632); +#14631 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#14632 = VECTOR('',#14633,1.); +#14633 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14634 = PLANE('',#14635); +#14635 = AXIS2_PLACEMENT_3D('',#14636,#14637,#14638); +#14636 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#14637 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#14638 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#14639 = ADVANCED_FACE('',(#14640),#14658,.T.); +#14640 = FACE_BOUND('',#14641,.F.); +#14641 = EDGE_LOOP('',(#14642,#14643,#14651,#14657)); +#14642 = ORIENTED_EDGE('',*,*,#14619,.T.); +#14643 = ORIENTED_EDGE('',*,*,#14644,.T.); +#14644 = EDGE_CURVE('',#14620,#14645,#14647,.T.); +#14645 = VERTEX_POINT('',#14646); +#14646 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#14647 = LINE('',#14648,#14649); +#14648 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#14649 = VECTOR('',#14650,1.); +#14650 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14651 = ORIENTED_EDGE('',*,*,#14652,.T.); +#14652 = EDGE_CURVE('',#14645,#13750,#14653,.T.); +#14653 = LINE('',#14654,#14655); +#14654 = CARTESIAN_POINT('',(0.146666666667,0.146666666667, + 6.473333333333)); +#14655 = VECTOR('',#14656,1.); +#14656 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#14657 = ORIENTED_EDGE('',*,*,#13749,.F.); +#14658 = PLANE('',#14659); +#14659 = AXIS2_PLACEMENT_3D('',#14660,#14661,#14662); +#14660 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#14661 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14662 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#14663 = ADVANCED_FACE('',(#14664),#14675,.T.); +#14664 = FACE_BOUND('',#14665,.F.); +#14665 = EDGE_LOOP('',(#14666,#14667,#14673,#14674)); +#14666 = ORIENTED_EDGE('',*,*,#14652,.F.); +#14667 = ORIENTED_EDGE('',*,*,#14668,.T.); +#14668 = EDGE_CURVE('',#14645,#14597,#14669,.T.); +#14669 = LINE('',#14670,#14671); +#14670 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#14671 = VECTOR('',#14672,1.); +#14672 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14673 = ORIENTED_EDGE('',*,*,#14604,.T.); +#14674 = ORIENTED_EDGE('',*,*,#13772,.F.); +#14675 = PLANE('',#14676); +#14676 = AXIS2_PLACEMENT_3D('',#14677,#14678,#14679); +#14677 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#14678 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#14679 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#14680 = ADVANCED_FACE('',(#14681),#14706,.T.); +#14681 = FACE_BOUND('',#14682,.F.); +#14682 = EDGE_LOOP('',(#14683,#14691,#14699,#14705)); +#14683 = ORIENTED_EDGE('',*,*,#14684,.T.); +#14684 = EDGE_CURVE('',#13790,#14685,#14687,.T.); +#14685 = VERTEX_POINT('',#14686); +#14686 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#14687 = LINE('',#14688,#14689); +#14688 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#14689 = VECTOR('',#14690,1.); +#14690 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#14691 = ORIENTED_EDGE('',*,*,#14692,.T.); +#14692 = EDGE_CURVE('',#14685,#14693,#14695,.T.); +#14693 = VERTEX_POINT('',#14694); +#14694 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#14695 = LINE('',#14696,#14697); +#14696 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#14697 = VECTOR('',#14698,1.); +#14698 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14699 = ORIENTED_EDGE('',*,*,#14700,.T.); +#14700 = EDGE_CURVE('',#14693,#13798,#14701,.T.); +#14701 = LINE('',#14702,#14703); +#14702 = CARTESIAN_POINT('',(2.646666666667,0.146666666667, + 6.473333333333)); +#14703 = VECTOR('',#14704,1.); +#14704 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#14705 = ORIENTED_EDGE('',*,*,#13797,.F.); +#14706 = PLANE('',#14707); +#14707 = AXIS2_PLACEMENT_3D('',#14708,#14709,#14710); +#14708 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#14709 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14710 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#14711 = ADVANCED_FACE('',(#14712),#14730,.T.); +#14712 = FACE_BOUND('',#14713,.F.); +#14713 = EDGE_LOOP('',(#14714,#14715,#14723,#14729)); +#14714 = ORIENTED_EDGE('',*,*,#14700,.F.); +#14715 = ORIENTED_EDGE('',*,*,#14716,.T.); +#14716 = EDGE_CURVE('',#14693,#14717,#14719,.T.); +#14717 = VERTEX_POINT('',#14718); +#14718 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#14719 = LINE('',#14720,#14721); +#14720 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#14721 = VECTOR('',#14722,1.); +#14722 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14723 = ORIENTED_EDGE('',*,*,#14724,.T.); +#14724 = EDGE_CURVE('',#14717,#13821,#14725,.T.); +#14725 = LINE('',#14726,#14727); +#14726 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#14727 = VECTOR('',#14728,1.); +#14728 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#14729 = ORIENTED_EDGE('',*,*,#13820,.F.); +#14730 = PLANE('',#14731); +#14731 = AXIS2_PLACEMENT_3D('',#14732,#14733,#14734); +#14732 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#14733 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#14734 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#14735 = ADVANCED_FACE('',(#14736),#14754,.F.); +#14736 = FACE_BOUND('',#14737,.T.); +#14737 = EDGE_LOOP('',(#14738,#14746,#14752,#14753)); +#14738 = ORIENTED_EDGE('',*,*,#14739,.F.); +#14739 = EDGE_CURVE('',#14740,#13845,#14742,.T.); +#14740 = VERTEX_POINT('',#14741); +#14741 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#14742 = LINE('',#14743,#14744); +#14743 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#14744 = VECTOR('',#14745,1.); +#14745 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#14746 = ORIENTED_EDGE('',*,*,#14747,.T.); +#14747 = EDGE_CURVE('',#14740,#14717,#14748,.T.); +#14748 = LINE('',#14749,#14750); +#14749 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#14750 = VECTOR('',#14751,1.); +#14751 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14752 = ORIENTED_EDGE('',*,*,#14724,.T.); +#14753 = ORIENTED_EDGE('',*,*,#13852,.F.); +#14754 = PLANE('',#14755); +#14755 = AXIS2_PLACEMENT_3D('',#14756,#14757,#14758); +#14756 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#14757 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14758 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#14759 = ADVANCED_FACE('',(#14760),#14771,.T.); +#14760 = FACE_BOUND('',#14761,.F.); +#14761 = EDGE_LOOP('',(#14762,#14763,#14764,#14765)); +#14762 = ORIENTED_EDGE('',*,*,#14684,.F.); +#14763 = ORIENTED_EDGE('',*,*,#13870,.T.); +#14764 = ORIENTED_EDGE('',*,*,#14739,.F.); +#14765 = ORIENTED_EDGE('',*,*,#14766,.F.); +#14766 = EDGE_CURVE('',#14685,#14740,#14767,.T.); +#14767 = LINE('',#14768,#14769); +#14768 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#14769 = VECTOR('',#14770,1.); +#14770 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14771 = PLANE('',#14772); +#14772 = AXIS2_PLACEMENT_3D('',#14773,#14774,#14775); +#14773 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#14774 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#14775 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#14776 = ADVANCED_FACE('',(#14777),#14802,.F.); +#14777 = FACE_BOUND('',#14778,.T.); +#14778 = EDGE_LOOP('',(#14779,#14787,#14795,#14801)); +#14779 = ORIENTED_EDGE('',*,*,#14780,.F.); +#14780 = EDGE_CURVE('',#14781,#13886,#14783,.T.); +#14781 = VERTEX_POINT('',#14782); +#14782 = CARTESIAN_POINT('',(4.88,-0.12,6.5)); +#14783 = LINE('',#14784,#14785); +#14784 = CARTESIAN_POINT('',(4.853333333333,-0.146666666667, + 6.473333333333)); +#14785 = VECTOR('',#14786,1.); +#14786 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#14787 = ORIENTED_EDGE('',*,*,#14788,.T.); +#14788 = EDGE_CURVE('',#14781,#14789,#14791,.T.); +#14789 = VERTEX_POINT('',#14790); +#14790 = CARTESIAN_POINT('',(4.88,0.12,6.5)); +#14791 = LINE('',#14792,#14793); +#14792 = CARTESIAN_POINT('',(4.88,-0.32,6.5)); +#14793 = VECTOR('',#14794,1.); +#14794 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14795 = ORIENTED_EDGE('',*,*,#14796,.T.); +#14796 = EDGE_CURVE('',#14789,#13894,#14797,.T.); +#14797 = LINE('',#14798,#14799); +#14798 = CARTESIAN_POINT('',(4.96,4.E-02,6.58)); +#14799 = VECTOR('',#14800,1.); +#14800 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#14801 = ORIENTED_EDGE('',*,*,#13893,.F.); +#14802 = PLANE('',#14803); +#14803 = AXIS2_PLACEMENT_3D('',#14804,#14805,#14806); +#14804 = CARTESIAN_POINT('',(4.78,-0.32,6.4)); +#14805 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14806 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#14807 = ADVANCED_FACE('',(#14808),#14826,.T.); +#14808 = FACE_BOUND('',#14809,.F.); +#14809 = EDGE_LOOP('',(#14810,#14818,#14819,#14820)); +#14810 = ORIENTED_EDGE('',*,*,#14811,.F.); +#14811 = EDGE_CURVE('',#13916,#14812,#14814,.T.); +#14812 = VERTEX_POINT('',#14813); +#14813 = CARTESIAN_POINT('',(5.12,-0.12,6.5)); +#14814 = LINE('',#14815,#14816); +#14815 = CARTESIAN_POINT('',(5.253333333333,-0.253333333333, + 6.366666666667)); +#14816 = VECTOR('',#14817,1.); +#14817 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#14818 = ORIENTED_EDGE('',*,*,#13925,.T.); +#14819 = ORIENTED_EDGE('',*,*,#14780,.F.); +#14820 = ORIENTED_EDGE('',*,*,#14821,.F.); +#14821 = EDGE_CURVE('',#14812,#14781,#14822,.T.); +#14822 = LINE('',#14823,#14824); +#14823 = CARTESIAN_POINT('',(5.32,-0.12,6.5)); +#14824 = VECTOR('',#14825,1.); +#14825 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14826 = PLANE('',#14827); +#14827 = AXIS2_PLACEMENT_3D('',#14828,#14829,#14830); +#14828 = CARTESIAN_POINT('',(5.32,-0.22,6.4)); +#14829 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#14830 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#14831 = ADVANCED_FACE('',(#14832),#14850,.T.); +#14832 = FACE_BOUND('',#14833,.F.); +#14833 = EDGE_LOOP('',(#14834,#14835,#14843,#14849)); +#14834 = ORIENTED_EDGE('',*,*,#14811,.T.); +#14835 = ORIENTED_EDGE('',*,*,#14836,.T.); +#14836 = EDGE_CURVE('',#14812,#14837,#14839,.T.); +#14837 = VERTEX_POINT('',#14838); +#14838 = CARTESIAN_POINT('',(5.12,0.12,6.5)); +#14839 = LINE('',#14840,#14841); +#14840 = CARTESIAN_POINT('',(5.12,-0.32,6.5)); +#14841 = VECTOR('',#14842,1.); +#14842 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14843 = ORIENTED_EDGE('',*,*,#14844,.T.); +#14844 = EDGE_CURVE('',#14837,#13942,#14845,.T.); +#14845 = LINE('',#14846,#14847); +#14846 = CARTESIAN_POINT('',(5.146666666667,0.146666666667, + 6.473333333333)); +#14847 = VECTOR('',#14848,1.); +#14848 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#14849 = ORIENTED_EDGE('',*,*,#13941,.F.); +#14850 = PLANE('',#14851); +#14851 = AXIS2_PLACEMENT_3D('',#14852,#14853,#14854); +#14852 = CARTESIAN_POINT('',(5.22,-0.32,6.4)); +#14853 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14854 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#14855 = ADVANCED_FACE('',(#14856),#14867,.T.); +#14856 = FACE_BOUND('',#14857,.F.); +#14857 = EDGE_LOOP('',(#14858,#14859,#14865,#14866)); +#14858 = ORIENTED_EDGE('',*,*,#14844,.F.); +#14859 = ORIENTED_EDGE('',*,*,#14860,.T.); +#14860 = EDGE_CURVE('',#14837,#14789,#14861,.T.); +#14861 = LINE('',#14862,#14863); +#14862 = CARTESIAN_POINT('',(5.32,0.12,6.5)); +#14863 = VECTOR('',#14864,1.); +#14864 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14865 = ORIENTED_EDGE('',*,*,#14796,.T.); +#14866 = ORIENTED_EDGE('',*,*,#13964,.F.); +#14867 = PLANE('',#14868); +#14868 = AXIS2_PLACEMENT_3D('',#14869,#14870,#14871); +#14869 = CARTESIAN_POINT('',(5.32,0.22,6.4)); +#14870 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#14871 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#14872 = ADVANCED_FACE('',(#14873),#14898,.T.); +#14873 = FACE_BOUND('',#14874,.F.); +#14874 = EDGE_LOOP('',(#14875,#14883,#14891,#14897)); +#14875 = ORIENTED_EDGE('',*,*,#14876,.F.); +#14876 = EDGE_CURVE('',#14877,#13981,#14879,.T.); +#14877 = VERTEX_POINT('',#14878); +#14878 = CARTESIAN_POINT('',(7.62,0.12,6.5)); +#14879 = LINE('',#14880,#14881); +#14880 = CARTESIAN_POINT('',(7.646666666667,0.146666666667, + 6.473333333333)); +#14881 = VECTOR('',#14882,1.); +#14882 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#14883 = ORIENTED_EDGE('',*,*,#14884,.T.); +#14884 = EDGE_CURVE('',#14877,#14885,#14887,.T.); +#14885 = VERTEX_POINT('',#14886); +#14886 = CARTESIAN_POINT('',(7.38,0.12,6.5)); +#14887 = LINE('',#14888,#14889); +#14888 = CARTESIAN_POINT('',(7.82,0.12,6.5)); +#14889 = VECTOR('',#14890,1.); +#14890 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14891 = ORIENTED_EDGE('',*,*,#14892,.T.); +#14892 = EDGE_CURVE('',#14885,#13989,#14893,.T.); +#14893 = LINE('',#14894,#14895); +#14894 = CARTESIAN_POINT('',(7.46,4.E-02,6.58)); +#14895 = VECTOR('',#14896,1.); +#14896 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#14897 = ORIENTED_EDGE('',*,*,#13988,.F.); +#14898 = PLANE('',#14899); +#14899 = AXIS2_PLACEMENT_3D('',#14900,#14901,#14902); +#14900 = CARTESIAN_POINT('',(7.82,0.22,6.4)); +#14901 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#14902 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#14903 = ADVANCED_FACE('',(#14904),#14922,.F.); +#14904 = FACE_BOUND('',#14905,.T.); +#14905 = EDGE_LOOP('',(#14906,#14914,#14920,#14921)); +#14906 = ORIENTED_EDGE('',*,*,#14907,.F.); +#14907 = EDGE_CURVE('',#14908,#14013,#14910,.T.); +#14908 = VERTEX_POINT('',#14909); +#14909 = CARTESIAN_POINT('',(7.38,-0.12,6.5)); +#14910 = LINE('',#14911,#14912); +#14911 = CARTESIAN_POINT('',(7.353333333333,-0.146666666667, + 6.473333333333)); +#14912 = VECTOR('',#14913,1.); +#14913 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#14914 = ORIENTED_EDGE('',*,*,#14915,.T.); +#14915 = EDGE_CURVE('',#14908,#14885,#14916,.T.); +#14916 = LINE('',#14917,#14918); +#14917 = CARTESIAN_POINT('',(7.38,-0.32,6.5)); +#14918 = VECTOR('',#14919,1.); +#14919 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14920 = ORIENTED_EDGE('',*,*,#14892,.T.); +#14921 = ORIENTED_EDGE('',*,*,#14020,.F.); +#14922 = PLANE('',#14923); +#14923 = AXIS2_PLACEMENT_3D('',#14924,#14925,#14926); +#14924 = CARTESIAN_POINT('',(7.28,-0.32,6.4)); +#14925 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#14926 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#14927 = ADVANCED_FACE('',(#14928),#14946,.T.); +#14928 = FACE_BOUND('',#14929,.F.); +#14929 = EDGE_LOOP('',(#14930,#14938,#14939,#14940)); +#14930 = ORIENTED_EDGE('',*,*,#14931,.F.); +#14931 = EDGE_CURVE('',#14036,#14932,#14934,.T.); +#14932 = VERTEX_POINT('',#14933); +#14933 = CARTESIAN_POINT('',(7.62,-0.12,6.5)); +#14934 = LINE('',#14935,#14936); +#14935 = CARTESIAN_POINT('',(7.753333333333,-0.253333333333, + 6.366666666667)); +#14936 = VECTOR('',#14937,1.); +#14937 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#14938 = ORIENTED_EDGE('',*,*,#14045,.T.); +#14939 = ORIENTED_EDGE('',*,*,#14907,.F.); +#14940 = ORIENTED_EDGE('',*,*,#14941,.F.); +#14941 = EDGE_CURVE('',#14932,#14908,#14942,.T.); +#14942 = LINE('',#14943,#14944); +#14943 = CARTESIAN_POINT('',(7.82,-0.12,6.5)); +#14944 = VECTOR('',#14945,1.); +#14945 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14946 = PLANE('',#14947); +#14947 = AXIS2_PLACEMENT_3D('',#14948,#14949,#14950); +#14948 = CARTESIAN_POINT('',(7.82,-0.22,6.4)); +#14949 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#14950 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#14951 = ADVANCED_FACE('',(#14952),#14963,.T.); +#14952 = FACE_BOUND('',#14953,.F.); +#14953 = EDGE_LOOP('',(#14954,#14955,#14961,#14962)); +#14954 = ORIENTED_EDGE('',*,*,#14931,.T.); +#14955 = ORIENTED_EDGE('',*,*,#14956,.T.); +#14956 = EDGE_CURVE('',#14932,#14877,#14957,.T.); +#14957 = LINE('',#14958,#14959); +#14958 = CARTESIAN_POINT('',(7.62,-0.32,6.5)); +#14959 = VECTOR('',#14960,1.); +#14960 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14961 = ORIENTED_EDGE('',*,*,#14876,.T.); +#14962 = ORIENTED_EDGE('',*,*,#14061,.F.); +#14963 = PLANE('',#14964); +#14964 = AXIS2_PLACEMENT_3D('',#14965,#14966,#14967); +#14965 = CARTESIAN_POINT('',(7.72,-0.32,6.4)); +#14966 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#14967 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#14968 = ADVANCED_FACE('',(#14969),#15010,.F.); +#14969 = FACE_BOUND('',#14970,.T.); +#14970 = EDGE_LOOP('',(#14971,#14981,#14989,#14997,#15003,#15004)); +#14971 = ORIENTED_EDGE('',*,*,#14972,.F.); +#14972 = EDGE_CURVE('',#14973,#14975,#14977,.T.); +#14973 = VERTEX_POINT('',#14974); +#14974 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#14975 = VERTEX_POINT('',#14976); +#14976 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#14977 = LINE('',#14978,#14979); +#14978 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#14979 = VECTOR('',#14980,1.); +#14980 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#14981 = ORIENTED_EDGE('',*,*,#14982,.T.); +#14982 = EDGE_CURVE('',#14973,#14983,#14985,.T.); +#14983 = VERTEX_POINT('',#14984); +#14984 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#14985 = LINE('',#14986,#14987); +#14986 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#14987 = VECTOR('',#14988,1.); +#14988 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14989 = ORIENTED_EDGE('',*,*,#14990,.T.); +#14990 = EDGE_CURVE('',#14983,#14991,#14993,.T.); +#14991 = VERTEX_POINT('',#14992); +#14992 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#14993 = LINE('',#14994,#14995); +#14994 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#14995 = VECTOR('',#14996,1.); +#14996 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#14997 = ORIENTED_EDGE('',*,*,#14998,.T.); +#14998 = EDGE_CURVE('',#14991,#14079,#14999,.T.); +#14999 = LINE('',#15000,#15001); +#15000 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#15001 = VECTOR('',#15002,1.); +#15002 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#15003 = ORIENTED_EDGE('',*,*,#14076,.F.); +#15004 = ORIENTED_EDGE('',*,*,#15005,.F.); +#15005 = EDGE_CURVE('',#14975,#14077,#15006,.T.); +#15006 = LINE('',#15007,#15008); +#15007 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#15008 = VECTOR('',#15009,1.); +#15009 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#15010 = PLANE('',#15011); +#15011 = AXIS2_PLACEMENT_3D('',#15012,#15013,#15014); +#15012 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#15013 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#15014 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#15015 = ADVANCED_FACE('',(#15016),#15041,.F.); +#15016 = FACE_BOUND('',#15017,.F.); +#15017 = EDGE_LOOP('',(#15018,#15019,#15025,#15026,#15027,#15035)); +#15018 = ORIENTED_EDGE('',*,*,#14205,.F.); +#15019 = ORIENTED_EDGE('',*,*,#15020,.T.); +#15020 = EDGE_CURVE('',#14198,#14118,#15021,.T.); +#15021 = LINE('',#15022,#15023); +#15022 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#15023 = VECTOR('',#15024,1.); +#15024 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15025 = ORIENTED_EDGE('',*,*,#14125,.T.); +#15026 = ORIENTED_EDGE('',*,*,#15005,.F.); +#15027 = ORIENTED_EDGE('',*,*,#15028,.F.); +#15028 = EDGE_CURVE('',#15029,#14975,#15031,.T.); +#15029 = VERTEX_POINT('',#15030); +#15030 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#15031 = LINE('',#15032,#15033); +#15032 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#15033 = VECTOR('',#15034,1.); +#15034 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15035 = ORIENTED_EDGE('',*,*,#15036,.T.); +#15036 = EDGE_CURVE('',#15029,#14164,#15037,.T.); +#15037 = LINE('',#15038,#15039); +#15038 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#15039 = VECTOR('',#15040,1.); +#15040 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#15041 = PLANE('',#15042); +#15042 = AXIS2_PLACEMENT_3D('',#15043,#15044,#15045); +#15043 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#15044 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#15045 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#15046 = ADVANCED_FACE('',(#15047),#15053,.F.); +#15047 = FACE_BOUND('',#15048,.F.); +#15048 = EDGE_LOOP('',(#15049,#15050,#15051,#15052)); +#15049 = ORIENTED_EDGE('',*,*,#14222,.T.); +#15050 = ORIENTED_EDGE('',*,*,#14117,.T.); +#15051 = ORIENTED_EDGE('',*,*,#15020,.F.); +#15052 = ORIENTED_EDGE('',*,*,#14197,.F.); +#15053 = PLANE('',#15054); +#15054 = AXIS2_PLACEMENT_3D('',#15055,#15056,#15057); +#15055 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#15056 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#15057 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#15058 = ADVANCED_FACE('',(#15059),#15070,.F.); +#15059 = FACE_BOUND('',#15060,.F.); +#15060 = EDGE_LOOP('',(#15061,#15067,#15068,#15069)); +#15061 = ORIENTED_EDGE('',*,*,#15062,.T.); +#15062 = EDGE_CURVE('',#14174,#14087,#15063,.T.); +#15063 = LINE('',#15064,#15065); +#15064 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#15065 = VECTOR('',#15066,1.); +#15066 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15067 = ORIENTED_EDGE('',*,*,#14094,.T.); +#15068 = ORIENTED_EDGE('',*,*,#14147,.F.); +#15069 = ORIENTED_EDGE('',*,*,#14181,.F.); +#15070 = PLANE('',#15071); +#15071 = AXIS2_PLACEMENT_3D('',#15072,#15073,#15074); +#15072 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#15073 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#15074 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#15075 = ADVANCED_FACE('',(#15076),#15096,.F.); +#15076 = FACE_BOUND('',#15077,.F.); +#15077 = EDGE_LOOP('',(#15078,#15079,#15087,#15093,#15094,#15095)); +#15078 = ORIENTED_EDGE('',*,*,#14173,.F.); +#15079 = ORIENTED_EDGE('',*,*,#15080,.F.); +#15080 = EDGE_CURVE('',#15081,#14166,#15083,.T.); +#15081 = VERTEX_POINT('',#15082); +#15082 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#15083 = LINE('',#15084,#15085); +#15084 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#15085 = VECTOR('',#15086,1.); +#15086 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#15087 = ORIENTED_EDGE('',*,*,#15088,.T.); +#15088 = EDGE_CURVE('',#15081,#14991,#15089,.T.); +#15089 = LINE('',#15090,#15091); +#15090 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#15091 = VECTOR('',#15092,1.); +#15092 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15093 = ORIENTED_EDGE('',*,*,#14998,.T.); +#15094 = ORIENTED_EDGE('',*,*,#14086,.T.); +#15095 = ORIENTED_EDGE('',*,*,#15062,.F.); +#15096 = PLANE('',#15097); +#15097 = AXIS2_PLACEMENT_3D('',#15098,#15099,#15100); +#15098 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#15099 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#15100 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#15101 = ADVANCED_FACE('',(#15102),#15129,.T.); +#15102 = FACE_BOUND('',#15103,.F.); +#15103 = EDGE_LOOP('',(#15104,#15112,#15120,#15126,#15127,#15128)); +#15104 = ORIENTED_EDGE('',*,*,#15105,.F.); +#15105 = EDGE_CURVE('',#15106,#15029,#15108,.T.); +#15106 = VERTEX_POINT('',#15107); +#15107 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#15108 = LINE('',#15109,#15110); +#15109 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225 + )); +#15110 = VECTOR('',#15111,1.); +#15111 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#15112 = ORIENTED_EDGE('',*,*,#15113,.T.); +#15113 = EDGE_CURVE('',#15106,#15114,#15116,.T.); +#15114 = VERTEX_POINT('',#15115); +#15115 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#15116 = LINE('',#15117,#15118); +#15117 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#15118 = VECTOR('',#15119,1.); +#15119 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15120 = ORIENTED_EDGE('',*,*,#15121,.T.); +#15121 = EDGE_CURVE('',#15114,#15081,#15122,.T.); +#15122 = LINE('',#15123,#15124); +#15123 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#15124 = VECTOR('',#15125,1.); +#15125 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#15126 = ORIENTED_EDGE('',*,*,#15080,.T.); +#15127 = ORIENTED_EDGE('',*,*,#14163,.F.); +#15128 = ORIENTED_EDGE('',*,*,#15036,.F.); +#15129 = PLANE('',#15130); +#15130 = AXIS2_PLACEMENT_3D('',#15131,#15132,#15133); +#15131 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#15132 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#15133 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#15134 = ADVANCED_FACE('',(#15135),#15160,.T.); +#15135 = FACE_BOUND('',#15136,.F.); +#15136 = EDGE_LOOP('',(#15137,#15145,#15153,#15159)); +#15137 = ORIENTED_EDGE('',*,*,#15138,.F.); +#15138 = EDGE_CURVE('',#15139,#14237,#15141,.T.); +#15139 = VERTEX_POINT('',#15140); +#15140 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#15141 = LINE('',#15142,#15143); +#15142 = CARTESIAN_POINT('',(2.753333333333,0.253333333333, + -3.266666666667)); +#15143 = VECTOR('',#15144,1.); +#15144 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#15145 = ORIENTED_EDGE('',*,*,#15146,.T.); +#15146 = EDGE_CURVE('',#15139,#15147,#15149,.T.); +#15147 = VERTEX_POINT('',#15148); +#15148 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#15149 = LINE('',#15150,#15151); +#15150 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#15151 = VECTOR('',#15152,1.); +#15152 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15153 = ORIENTED_EDGE('',*,*,#15154,.T.); +#15154 = EDGE_CURVE('',#15147,#14239,#15155,.T.); +#15155 = LINE('',#15156,#15157); +#15156 = CARTESIAN_POINT('',(2.646666666667,-0.146666666667, + -3.373333333333)); +#15157 = VECTOR('',#15158,1.); +#15158 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#15159 = ORIENTED_EDGE('',*,*,#14236,.F.); +#15160 = PLANE('',#15161); +#15161 = AXIS2_PLACEMENT_3D('',#15162,#15163,#15164); +#15162 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#15163 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#15164 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#15165 = ADVANCED_FACE('',(#15166),#15184,.T.); +#15166 = FACE_BOUND('',#15167,.T.); +#15167 = EDGE_LOOP('',(#15168,#15169,#15177,#15183)); +#15168 = ORIENTED_EDGE('',*,*,#15138,.F.); +#15169 = ORIENTED_EDGE('',*,*,#15170,.T.); +#15170 = EDGE_CURVE('',#15139,#15171,#15173,.T.); +#15171 = VERTEX_POINT('',#15172); +#15172 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#15173 = LINE('',#15174,#15175); +#15174 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#15175 = VECTOR('',#15176,1.); +#15176 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15177 = ORIENTED_EDGE('',*,*,#15178,.T.); +#15178 = EDGE_CURVE('',#15171,#14270,#15179,.T.); +#15179 = LINE('',#15180,#15181); +#15180 = CARTESIAN_POINT('',(2.353333333333,0.146666666667, + -3.373333333333)); +#15181 = VECTOR('',#15182,1.); +#15182 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#15183 = ORIENTED_EDGE('',*,*,#14277,.F.); +#15184 = PLANE('',#15185); +#15185 = AXIS2_PLACEMENT_3D('',#15186,#15187,#15188); +#15186 = CARTESIAN_POINT('',(2.82,0.22,-3.3)); +#15187 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187 + )); +#15188 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#15189 = ADVANCED_FACE('',(#15190),#15208,.F.); +#15190 = FACE_BOUND('',#15191,.T.); +#15191 = EDGE_LOOP('',(#15192,#15193,#15201,#15207)); +#15192 = ORIENTED_EDGE('',*,*,#15178,.F.); +#15193 = ORIENTED_EDGE('',*,*,#15194,.T.); +#15194 = EDGE_CURVE('',#15171,#15195,#15197,.T.); +#15195 = VERTEX_POINT('',#15196); +#15196 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#15197 = LINE('',#15198,#15199); +#15198 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#15199 = VECTOR('',#15200,1.); +#15200 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15201 = ORIENTED_EDGE('',*,*,#15202,.T.); +#15202 = EDGE_CURVE('',#15195,#14292,#15203,.T.); +#15203 = LINE('',#15204,#15205); +#15204 = CARTESIAN_POINT('',(2.46,-4.E-02,-3.48)); +#15205 = VECTOR('',#15206,1.); +#15206 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#15207 = ORIENTED_EDGE('',*,*,#14291,.F.); +#15208 = PLANE('',#15209); +#15209 = AXIS2_PLACEMENT_3D('',#15210,#15211,#15212); +#15210 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#15211 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#15212 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#15213 = ADVANCED_FACE('',(#15214),#15225,.T.); +#15214 = FACE_BOUND('',#15215,.F.); +#15215 = EDGE_LOOP('',(#15216,#15217,#15223,#15224)); +#15216 = ORIENTED_EDGE('',*,*,#15154,.F.); +#15217 = ORIENTED_EDGE('',*,*,#15218,.T.); +#15218 = EDGE_CURVE('',#15147,#15195,#15219,.T.); +#15219 = LINE('',#15220,#15221); +#15220 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#15221 = VECTOR('',#15222,1.); +#15222 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15223 = ORIENTED_EDGE('',*,*,#15202,.T.); +#15224 = ORIENTED_EDGE('',*,*,#14316,.F.); +#15225 = PLANE('',#15226); +#15226 = AXIS2_PLACEMENT_3D('',#15227,#15228,#15229); +#15227 = CARTESIAN_POINT('',(2.82,-0.22,-3.3)); +#15228 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#15229 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#15230 = ADVANCED_FACE('',(#15231),#15256,.F.); +#15231 = FACE_BOUND('',#15232,.T.); +#15232 = EDGE_LOOP('',(#15233,#15241,#15249,#15255)); +#15233 = ORIENTED_EDGE('',*,*,#15234,.F.); +#15234 = EDGE_CURVE('',#15235,#14333,#15237,.T.); +#15235 = VERTEX_POINT('',#15236); +#15236 = CARTESIAN_POINT('',(4.88,0.12,-3.4)); +#15237 = LINE('',#15238,#15239); +#15238 = CARTESIAN_POINT('',(4.853333333333,0.146666666667, + -3.373333333333)); +#15239 = VECTOR('',#15240,1.); +#15240 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#15241 = ORIENTED_EDGE('',*,*,#15242,.T.); +#15242 = EDGE_CURVE('',#15235,#15243,#15245,.T.); +#15243 = VERTEX_POINT('',#15244); +#15244 = CARTESIAN_POINT('',(4.88,-0.12,-3.4)); +#15245 = LINE('',#15246,#15247); +#15246 = CARTESIAN_POINT('',(4.88,0.32,-3.4)); +#15247 = VECTOR('',#15248,1.); +#15248 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15249 = ORIENTED_EDGE('',*,*,#15250,.T.); +#15250 = EDGE_CURVE('',#15243,#14335,#15251,.T.); +#15251 = LINE('',#15252,#15253); +#15252 = CARTESIAN_POINT('',(4.96,-4.E-02,-3.48)); +#15253 = VECTOR('',#15254,1.); +#15254 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#15255 = ORIENTED_EDGE('',*,*,#14332,.F.); +#15256 = PLANE('',#15257); +#15257 = AXIS2_PLACEMENT_3D('',#15258,#15259,#15260); +#15258 = CARTESIAN_POINT('',(4.78,0.32,-3.3)); +#15259 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#15260 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#15261 = ADVANCED_FACE('',(#15262),#15280,.T.); +#15262 = FACE_BOUND('',#15263,.F.); +#15263 = EDGE_LOOP('',(#15264,#15272,#15278,#15279)); +#15264 = ORIENTED_EDGE('',*,*,#15265,.F.); +#15265 = EDGE_CURVE('',#15266,#14364,#15268,.T.); +#15266 = VERTEX_POINT('',#15267); +#15267 = CARTESIAN_POINT('',(5.12,-0.12,-3.4)); +#15268 = LINE('',#15269,#15270); +#15269 = CARTESIAN_POINT('',(5.146666666667,-0.146666666667, + -3.373333333333)); +#15270 = VECTOR('',#15271,1.); +#15271 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#15272 = ORIENTED_EDGE('',*,*,#15273,.T.); +#15273 = EDGE_CURVE('',#15266,#15243,#15274,.T.); +#15274 = LINE('',#15275,#15276); +#15275 = CARTESIAN_POINT('',(5.32,-0.12,-3.4)); +#15276 = VECTOR('',#15277,1.); +#15277 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15278 = ORIENTED_EDGE('',*,*,#15250,.T.); +#15279 = ORIENTED_EDGE('',*,*,#14371,.F.); +#15280 = PLANE('',#15281); +#15281 = AXIS2_PLACEMENT_3D('',#15282,#15283,#15284); +#15282 = CARTESIAN_POINT('',(5.32,-0.22,-3.3)); +#15283 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#15284 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#15285 = ADVANCED_FACE('',(#15286),#15304,.T.); +#15286 = FACE_BOUND('',#15287,.F.); +#15287 = EDGE_LOOP('',(#15288,#15296,#15302,#15303)); +#15288 = ORIENTED_EDGE('',*,*,#15289,.F.); +#15289 = EDGE_CURVE('',#15290,#14388,#15292,.T.); +#15290 = VERTEX_POINT('',#15291); +#15291 = CARTESIAN_POINT('',(5.12,0.12,-3.4)); +#15292 = LINE('',#15293,#15294); +#15293 = CARTESIAN_POINT('',(5.253333333333,0.253333333333, + -3.266666666667)); +#15294 = VECTOR('',#15295,1.); +#15295 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#15296 = ORIENTED_EDGE('',*,*,#15297,.T.); +#15297 = EDGE_CURVE('',#15290,#15266,#15298,.T.); +#15298 = LINE('',#15299,#15300); +#15299 = CARTESIAN_POINT('',(5.12,0.32,-3.4)); +#15300 = VECTOR('',#15301,1.); +#15301 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15302 = ORIENTED_EDGE('',*,*,#15265,.T.); +#15303 = ORIENTED_EDGE('',*,*,#14387,.F.); +#15304 = PLANE('',#15305); +#15305 = AXIS2_PLACEMENT_3D('',#15306,#15307,#15308); +#15306 = CARTESIAN_POINT('',(5.22,0.32,-3.3)); +#15307 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#15308 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#15309 = ADVANCED_FACE('',(#15310),#15321,.T.); +#15310 = FACE_BOUND('',#15311,.T.); +#15311 = EDGE_LOOP('',(#15312,#15313,#15319,#15320)); +#15312 = ORIENTED_EDGE('',*,*,#15289,.F.); +#15313 = ORIENTED_EDGE('',*,*,#15314,.T.); +#15314 = EDGE_CURVE('',#15290,#15235,#15315,.T.); +#15315 = LINE('',#15316,#15317); +#15316 = CARTESIAN_POINT('',(5.32,0.12,-3.4)); +#15317 = VECTOR('',#15318,1.); +#15318 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15319 = ORIENTED_EDGE('',*,*,#15234,.T.); +#15320 = ORIENTED_EDGE('',*,*,#14414,.F.); +#15321 = PLANE('',#15322); +#15322 = AXIS2_PLACEMENT_3D('',#15323,#15324,#15325); +#15323 = CARTESIAN_POINT('',(5.32,0.22,-3.3)); +#15324 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187 + )); +#15325 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#15326 = ADVANCED_FACE('',(#15327),#15338,.F.); +#15327 = FACE_BOUND('',#15328,.F.); +#15328 = EDGE_LOOP('',(#15329,#15330,#15331,#15337)); +#15329 = ORIENTED_EDGE('',*,*,#14445,.T.); +#15330 = ORIENTED_EDGE('',*,*,#14493,.T.); +#15331 = ORIENTED_EDGE('',*,*,#15332,.F.); +#15332 = EDGE_CURVE('',#14567,#14494,#15333,.T.); +#15333 = LINE('',#15334,#15335); +#15334 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#15335 = VECTOR('',#15336,1.); +#15336 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15337 = ORIENTED_EDGE('',*,*,#14566,.F.); +#15338 = PLANE('',#15339); +#15339 = AXIS2_PLACEMENT_3D('',#15340,#15341,#15342); +#15340 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#15341 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#15342 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#15343 = ADVANCED_FACE('',(#15344),#15385,.F.); +#15344 = FACE_BOUND('',#15345,.T.); +#15345 = EDGE_LOOP('',(#15346,#15356,#15364,#15372,#15378,#15379)); +#15346 = ORIENTED_EDGE('',*,*,#15347,.F.); +#15347 = EDGE_CURVE('',#15348,#15350,#15352,.T.); +#15348 = VERTEX_POINT('',#15349); +#15349 = CARTESIAN_POINT('',(7.38,0.12,-3.4)); +#15350 = VERTEX_POINT('',#15351); +#15351 = CARTESIAN_POINT('',(7.182447406934,0.351192514695, + -3.202447406934)); +#15352 = LINE('',#15353,#15354); +#15353 = CARTESIAN_POINT('',(7.346150901889,0.159613036666, + -3.366150901889)); +#15354 = VECTOR('',#15355,1.); +#15355 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#15356 = ORIENTED_EDGE('',*,*,#15357,.T.); +#15357 = EDGE_CURVE('',#15348,#15358,#15360,.T.); +#15358 = VERTEX_POINT('',#15359); +#15359 = CARTESIAN_POINT('',(7.38,-0.12,-3.4)); +#15360 = LINE('',#15361,#15362); +#15361 = CARTESIAN_POINT('',(7.38,0.32,-3.4)); +#15362 = VECTOR('',#15363,1.); +#15363 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15364 = ORIENTED_EDGE('',*,*,#15365,.T.); +#15365 = EDGE_CURVE('',#15358,#15366,#15368,.T.); +#15366 = VERTEX_POINT('',#15367); +#15367 = CARTESIAN_POINT('',(7.182447406934,-0.288807485305, + -3.202447406934)); +#15368 = LINE('',#15369,#15370); +#15369 = CARTESIAN_POINT('',(7.461511443392,-5.034896900541E-02, + -3.481511443392)); +#15370 = VECTOR('',#15371,1.); +#15371 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#15372 = ORIENTED_EDGE('',*,*,#15373,.T.); +#15373 = EDGE_CURVE('',#15366,#14462,#15374,.T.); +#15374 = LINE('',#15375,#15376); +#15375 = CARTESIAN_POINT('',(7.414309165527,-0.325417236662, + -3.434309165527)); +#15376 = VECTOR('',#15377,1.); +#15377 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#15378 = ORIENTED_EDGE('',*,*,#14459,.F.); +#15379 = ORIENTED_EDGE('',*,*,#15380,.F.); +#15380 = EDGE_CURVE('',#15350,#14460,#15381,.T.); +#15381 = LINE('',#15382,#15383); +#15382 = CARTESIAN_POINT('',(6.958413132695,0.386566347469, + -2.978413132695)); +#15383 = VECTOR('',#15384,1.); +#15384 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#15385 = PLANE('',#15386); +#15386 = AXIS2_PLACEMENT_3D('',#15387,#15388,#15389); +#15387 = CARTESIAN_POINT('',(7.28,0.32,-3.3)); +#15388 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#15389 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#15390 = ADVANCED_FACE('',(#15391),#15411,.F.); +#15391 = FACE_BOUND('',#15392,.F.); +#15392 = EDGE_LOOP('',(#15393,#15394,#15395,#15396,#15397,#15405)); +#15393 = ORIENTED_EDGE('',*,*,#14574,.F.); +#15394 = ORIENTED_EDGE('',*,*,#15332,.T.); +#15395 = ORIENTED_EDGE('',*,*,#14501,.T.); +#15396 = ORIENTED_EDGE('',*,*,#15380,.F.); +#15397 = ORIENTED_EDGE('',*,*,#15398,.F.); +#15398 = EDGE_CURVE('',#15399,#15350,#15401,.T.); +#15399 = VERTEX_POINT('',#15400); +#15400 = CARTESIAN_POINT('',(7.817552593066,0.351192514695, + -3.202447406934)); +#15401 = LINE('',#15402,#15403); +#15402 = CARTESIAN_POINT('',(7.82,0.351192514695,-3.202447406934)); +#15403 = VECTOR('',#15404,1.); +#15404 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15405 = ORIENTED_EDGE('',*,*,#15406,.T.); +#15406 = EDGE_CURVE('',#15399,#14540,#15407,.T.); +#15407 = LINE('',#15408,#15409); +#15408 = CARTESIAN_POINT('',(8.199616963064,0.411518467852, + -2.820383036936)); +#15409 = VECTOR('',#15410,1.); +#15410 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#15411 = PLANE('',#15412); +#15412 = AXIS2_PLACEMENT_3D('',#15413,#15414,#15415); +#15413 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#15414 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#15415 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#15416 = ADVANCED_FACE('',(#15417),#15428,.F.); +#15417 = FACE_BOUND('',#15418,.F.); +#15418 = EDGE_LOOP('',(#15419,#15425,#15426,#15427)); +#15419 = ORIENTED_EDGE('',*,*,#15420,.T.); +#15420 = EDGE_CURVE('',#14550,#14470,#15421,.T.); +#15421 = LINE('',#15422,#15423); +#15422 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#15423 = VECTOR('',#15424,1.); +#15424 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15425 = ORIENTED_EDGE('',*,*,#14477,.T.); +#15426 = ORIENTED_EDGE('',*,*,#14523,.F.); +#15427 = ORIENTED_EDGE('',*,*,#14557,.F.); +#15428 = PLANE('',#15429); +#15429 = AXIS2_PLACEMENT_3D('',#15430,#15431,#15432); +#15430 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#15431 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#15432 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#15433 = ADVANCED_FACE('',(#15434),#15454,.F.); +#15434 = FACE_BOUND('',#15435,.F.); +#15435 = EDGE_LOOP('',(#15436,#15437,#15445,#15451,#15452,#15453)); +#15436 = ORIENTED_EDGE('',*,*,#14549,.F.); +#15437 = ORIENTED_EDGE('',*,*,#15438,.F.); +#15438 = EDGE_CURVE('',#15439,#14542,#15441,.T.); +#15439 = VERTEX_POINT('',#15440); +#15440 = CARTESIAN_POINT('',(7.817552593066,-0.288807485305, + -3.202447406934)); +#15441 = LINE('',#15442,#15443); +#15442 = CARTESIAN_POINT('',(7.743720930233,-0.300465116279, + -3.276279069767)); +#15443 = VECTOR('',#15444,1.); +#15444 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#15445 = ORIENTED_EDGE('',*,*,#15446,.T.); +#15446 = EDGE_CURVE('',#15439,#15366,#15447,.T.); +#15447 = LINE('',#15448,#15449); +#15448 = CARTESIAN_POINT('',(7.82,-0.288807485305,-3.202447406934)); +#15449 = VECTOR('',#15450,1.); +#15450 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15451 = ORIENTED_EDGE('',*,*,#15373,.T.); +#15452 = ORIENTED_EDGE('',*,*,#14469,.T.); +#15453 = ORIENTED_EDGE('',*,*,#15420,.F.); +#15454 = PLANE('',#15455); +#15455 = AXIS2_PLACEMENT_3D('',#15456,#15457,#15458); +#15456 = CARTESIAN_POINT('',(7.82,-0.32,-3.4)); +#15457 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#15458 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#15459 = ADVANCED_FACE('',(#15460),#15487,.T.); +#15460 = FACE_BOUND('',#15461,.F.); +#15461 = EDGE_LOOP('',(#15462,#15470,#15478,#15484,#15485,#15486)); +#15462 = ORIENTED_EDGE('',*,*,#15463,.F.); +#15463 = EDGE_CURVE('',#15464,#15399,#15466,.T.); +#15464 = VERTEX_POINT('',#15465); +#15465 = CARTESIAN_POINT('',(7.62,0.12,-3.4)); +#15466 = LINE('',#15467,#15468); +#15467 = CARTESIAN_POINT('',(7.74881689775,0.270752273427,-3.27118310225 + )); +#15468 = VECTOR('',#15469,1.); +#15469 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#15470 = ORIENTED_EDGE('',*,*,#15471,.T.); +#15471 = EDGE_CURVE('',#15464,#15472,#15474,.T.); +#15472 = VERTEX_POINT('',#15473); +#15473 = CARTESIAN_POINT('',(7.62,-0.12,-3.4)); +#15474 = LINE('',#15475,#15476); +#15475 = CARTESIAN_POINT('',(7.62,0.32,-3.4)); +#15476 = VECTOR('',#15477,1.); +#15477 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15478 = ORIENTED_EDGE('',*,*,#15479,.T.); +#15479 = EDGE_CURVE('',#15472,#15439,#15480,.T.); +#15480 = LINE('',#15481,#15482); +#15481 = CARTESIAN_POINT('',(7.655697812072,-0.150503562587, + -3.364302187928)); +#15482 = VECTOR('',#15483,1.); +#15483 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#15484 = ORIENTED_EDGE('',*,*,#15438,.T.); +#15485 = ORIENTED_EDGE('',*,*,#14539,.F.); +#15486 = ORIENTED_EDGE('',*,*,#15406,.F.); +#15487 = PLANE('',#15488); +#15488 = AXIS2_PLACEMENT_3D('',#15489,#15490,#15491); +#15489 = CARTESIAN_POINT('',(7.72,0.32,-3.3)); +#15490 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#15491 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#15492 = ADVANCED_FACE('',(#15493),#15499,.F.); +#15493 = FACE_BOUND('',#15494,.F.); +#15494 = EDGE_LOOP('',(#15495,#15496,#15497,#15498)); +#15495 = ORIENTED_EDGE('',*,*,#14668,.F.); +#15496 = ORIENTED_EDGE('',*,*,#14644,.F.); +#15497 = ORIENTED_EDGE('',*,*,#14629,.T.); +#15498 = ORIENTED_EDGE('',*,*,#14596,.T.); +#15499 = PLANE('',#15500); +#15500 = AXIS2_PLACEMENT_3D('',#15501,#15502,#15503); +#15501 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#15502 = DIRECTION('',(-0.,0.,-1.)); +#15503 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15504 = ADVANCED_FACE('',(#15505),#15511,.F.); +#15505 = FACE_BOUND('',#15506,.F.); +#15506 = EDGE_LOOP('',(#15507,#15508,#15509,#15510)); +#15507 = ORIENTED_EDGE('',*,*,#14716,.F.); +#15508 = ORIENTED_EDGE('',*,*,#14692,.F.); +#15509 = ORIENTED_EDGE('',*,*,#14766,.T.); +#15510 = ORIENTED_EDGE('',*,*,#14747,.T.); +#15511 = PLANE('',#15512); +#15512 = AXIS2_PLACEMENT_3D('',#15513,#15514,#15515); +#15513 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#15514 = DIRECTION('',(-0.,0.,-1.)); +#15515 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15516 = ADVANCED_FACE('',(#15517),#15523,.F.); +#15517 = FACE_BOUND('',#15518,.F.); +#15518 = EDGE_LOOP('',(#15519,#15520,#15521,#15522)); +#15519 = ORIENTED_EDGE('',*,*,#14860,.F.); +#15520 = ORIENTED_EDGE('',*,*,#14836,.F.); +#15521 = ORIENTED_EDGE('',*,*,#14821,.T.); +#15522 = ORIENTED_EDGE('',*,*,#14788,.T.); +#15523 = PLANE('',#15524); +#15524 = AXIS2_PLACEMENT_3D('',#15525,#15526,#15527); +#15525 = CARTESIAN_POINT('',(5.32,-0.32,6.5)); +#15526 = DIRECTION('',(-0.,0.,-1.)); +#15527 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15528 = ADVANCED_FACE('',(#15529),#15535,.F.); +#15529 = FACE_BOUND('',#15530,.F.); +#15530 = EDGE_LOOP('',(#15531,#15532,#15533,#15534)); +#15531 = ORIENTED_EDGE('',*,*,#14884,.F.); +#15532 = ORIENTED_EDGE('',*,*,#14956,.F.); +#15533 = ORIENTED_EDGE('',*,*,#14941,.T.); +#15534 = ORIENTED_EDGE('',*,*,#14915,.T.); +#15535 = PLANE('',#15536); +#15536 = AXIS2_PLACEMENT_3D('',#15537,#15538,#15539); +#15537 = CARTESIAN_POINT('',(7.82,-0.32,6.5)); +#15538 = DIRECTION('',(-0.,0.,-1.)); +#15539 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15540 = ADVANCED_FACE('',(#15541),#15552,.T.); +#15541 = FACE_BOUND('',#15542,.T.); +#15542 = EDGE_LOOP('',(#15543,#15544,#15550,#15551)); +#15543 = ORIENTED_EDGE('',*,*,#15105,.F.); +#15544 = ORIENTED_EDGE('',*,*,#15545,.T.); +#15545 = EDGE_CURVE('',#15106,#14973,#15546,.T.); +#15546 = LINE('',#15547,#15548); +#15547 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#15548 = VECTOR('',#15549,1.); +#15549 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15550 = ORIENTED_EDGE('',*,*,#14972,.T.); +#15551 = ORIENTED_EDGE('',*,*,#15028,.F.); +#15552 = PLANE('',#15553); +#15553 = AXIS2_PLACEMENT_3D('',#15554,#15555,#15556); +#15554 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#15555 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#15556 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#15557 = ADVANCED_FACE('',(#15558),#15569,.F.); +#15558 = FACE_BOUND('',#15559,.F.); +#15559 = EDGE_LOOP('',(#15560,#15561,#15562,#15563)); +#15560 = ORIENTED_EDGE('',*,*,#15113,.F.); +#15561 = ORIENTED_EDGE('',*,*,#15545,.T.); +#15562 = ORIENTED_EDGE('',*,*,#14982,.T.); +#15563 = ORIENTED_EDGE('',*,*,#15564,.F.); +#15564 = EDGE_CURVE('',#15114,#14983,#15565,.T.); +#15565 = LINE('',#15566,#15567); +#15566 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#15567 = VECTOR('',#15568,1.); +#15568 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15569 = PLANE('',#15570); +#15570 = AXIS2_PLACEMENT_3D('',#15571,#15572,#15573); +#15571 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#15572 = DIRECTION('',(0.,0.,1.)); +#15573 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15574 = ADVANCED_FACE('',(#15575),#15581,.T.); +#15575 = FACE_BOUND('',#15576,.F.); +#15576 = EDGE_LOOP('',(#15577,#15578,#15579,#15580)); +#15577 = ORIENTED_EDGE('',*,*,#15121,.F.); +#15578 = ORIENTED_EDGE('',*,*,#15564,.T.); +#15579 = ORIENTED_EDGE('',*,*,#14990,.T.); +#15580 = ORIENTED_EDGE('',*,*,#15088,.F.); +#15581 = PLANE('',#15582); +#15582 = AXIS2_PLACEMENT_3D('',#15583,#15584,#15585); +#15583 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#15584 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#15585 = DIRECTION('',(1.,-1.224646799148E-16,-5.515863360725E-29)); +#15586 = ADVANCED_FACE('',(#15587),#15593,.F.); +#15587 = FACE_BOUND('',#15588,.F.); +#15588 = EDGE_LOOP('',(#15589,#15590,#15591,#15592)); +#15589 = ORIENTED_EDGE('',*,*,#15218,.F.); +#15590 = ORIENTED_EDGE('',*,*,#15146,.F.); +#15591 = ORIENTED_EDGE('',*,*,#15170,.T.); +#15592 = ORIENTED_EDGE('',*,*,#15194,.T.); +#15593 = PLANE('',#15594); +#15594 = AXIS2_PLACEMENT_3D('',#15595,#15596,#15597); +#15595 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#15596 = DIRECTION('',(0.,0.,1.)); +#15597 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15598 = ADVANCED_FACE('',(#15599),#15605,.F.); +#15599 = FACE_BOUND('',#15600,.F.); +#15600 = EDGE_LOOP('',(#15601,#15602,#15603,#15604)); +#15601 = ORIENTED_EDGE('',*,*,#15273,.F.); +#15602 = ORIENTED_EDGE('',*,*,#15297,.F.); +#15603 = ORIENTED_EDGE('',*,*,#15314,.T.); +#15604 = ORIENTED_EDGE('',*,*,#15242,.T.); +#15605 = PLANE('',#15606); +#15606 = AXIS2_PLACEMENT_3D('',#15607,#15608,#15609); +#15607 = CARTESIAN_POINT('',(5.32,0.32,-3.4)); +#15608 = DIRECTION('',(0.,0.,1.)); +#15609 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15610 = ADVANCED_FACE('',(#15611),#15622,.T.); +#15611 = FACE_BOUND('',#15612,.T.); +#15612 = EDGE_LOOP('',(#15613,#15614,#15620,#15621)); +#15613 = ORIENTED_EDGE('',*,*,#15463,.F.); +#15614 = ORIENTED_EDGE('',*,*,#15615,.T.); +#15615 = EDGE_CURVE('',#15464,#15348,#15616,.T.); +#15616 = LINE('',#15617,#15618); +#15617 = CARTESIAN_POINT('',(7.82,0.12,-3.4)); +#15618 = VECTOR('',#15619,1.); +#15619 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15620 = ORIENTED_EDGE('',*,*,#15347,.T.); +#15621 = ORIENTED_EDGE('',*,*,#15398,.F.); +#15622 = PLANE('',#15623); +#15623 = AXIS2_PLACEMENT_3D('',#15624,#15625,#15626); +#15624 = CARTESIAN_POINT('',(7.82,0.235596257347,-3.301223703467)); +#15625 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#15626 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#15627 = ADVANCED_FACE('',(#15628),#15639,.F.); +#15628 = FACE_BOUND('',#15629,.F.); +#15629 = EDGE_LOOP('',(#15630,#15631,#15632,#15633)); +#15630 = ORIENTED_EDGE('',*,*,#15471,.F.); +#15631 = ORIENTED_EDGE('',*,*,#15615,.T.); +#15632 = ORIENTED_EDGE('',*,*,#15357,.T.); +#15633 = ORIENTED_EDGE('',*,*,#15634,.F.); +#15634 = EDGE_CURVE('',#15472,#15358,#15635,.T.); +#15635 = LINE('',#15636,#15637); +#15636 = CARTESIAN_POINT('',(7.82,-0.12,-3.4)); +#15637 = VECTOR('',#15638,1.); +#15638 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15639 = PLANE('',#15640); +#15640 = AXIS2_PLACEMENT_3D('',#15641,#15642,#15643); +#15641 = CARTESIAN_POINT('',(7.82,0.32,-3.4)); +#15642 = DIRECTION('',(0.,0.,1.)); +#15643 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15644 = ADVANCED_FACE('',(#15645),#15651,.T.); +#15645 = FACE_BOUND('',#15646,.F.); +#15646 = EDGE_LOOP('',(#15647,#15648,#15649,#15650)); +#15647 = ORIENTED_EDGE('',*,*,#15479,.F.); +#15648 = ORIENTED_EDGE('',*,*,#15634,.T.); +#15649 = ORIENTED_EDGE('',*,*,#15365,.T.); +#15650 = ORIENTED_EDGE('',*,*,#15446,.F.); +#15651 = PLANE('',#15652); +#15652 = AXIS2_PLACEMENT_3D('',#15653,#15654,#15655); +#15653 = CARTESIAN_POINT('',(7.82,-0.204403742653,-3.301223703467)); +#15654 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#15655 = DIRECTION('',(1.,-1.224646799148E-16,-5.515863360725E-29)); +#15656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#15660)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#15657,#15658,#15659)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#15657 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#15658 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#15659 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#15660 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#15657, + 'distance_accuracy_value','confusion accuracy'); +#15661 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#15662,#15664); +#15662 = ( REPRESENTATION_RELATIONSHIP('','',#11460,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#15663) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#15663 = ITEM_DEFINED_TRANSFORMATION('','',#11,#91); +#15664 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #15665); +#15665 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('20','J3','',#5,#11455,$); +#15666 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#11457)); +#15667 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#15668,#15670); +#15668 = ( REPRESENTATION_RELATIONSHIP('','',#11460,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#15669) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#15669 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95); +#15670 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #15671); +#15671 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('21','J4','',#5,#11455,$); +#15672 = SHAPE_DEFINITION_REPRESENTATION(#15673,#15679); +#15673 = PRODUCT_DEFINITION_SHAPE('','',#15674); +#15674 = PRODUCT_DEFINITION('design','',#15675,#15678); +#15675 = PRODUCT_DEFINITION_FORMATION('','',#15676); +#15676 = PRODUCT('JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', + 'JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical','',(#15677)); +#15677 = PRODUCT_CONTEXT('',#2,'mechanical'); +#15678 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#15679 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15680),#19201); +#15680 = MANIFOLD_SOLID_BREP('',#15681); +#15681 = CLOSED_SHELL('',(#15682,#15754,#15793,#15817,#15882,#15906, + #16026,#16050,#16115,#16140,#16189,#16206,#16230,#16247,#16417, + #16441,#16675,#16699,#16732,#16756,#16787,#16804,#16837,#16861, + #16892,#16909,#16942,#16966,#16997,#17009,#17042,#17059,#17076, + #17088,#17202,#17219,#17236,#17253,#17270,#17287,#17304,#17321, + #17338,#17355,#17372,#17389,#17406,#17423,#17440,#17452,#17469, + #17486,#17503,#17549,#17595,#17641,#17672,#17696,#17720,#17737, + #17768,#17792,#17816,#17833,#17864,#17888,#17912,#17929,#17992, + #18016,#18072,#18089,#18120,#18144,#18168,#18185,#18248,#18272, + #18328,#18345,#18376,#18400,#18424,#18441,#18472,#18496,#18520, + #18537,#18568,#18592,#18616,#18633,#18680,#18711,#18723,#18740, + #18766,#18799,#18830,#18854,#18878,#18895,#18942,#18973,#18985, + #19002,#19028,#19061,#19073,#19085,#19097,#19114,#19131,#19143, + #19155,#19172,#19189)); +#15682 = ADVANCED_FACE('',(#15683),#15749,.T.); +#15683 = FACE_BOUND('',#15684,.T.); +#15684 = EDGE_LOOP('',(#15685,#15695,#15703,#15711,#15719,#15727,#15735, + #15743)); +#15685 = ORIENTED_EDGE('',*,*,#15686,.T.); +#15686 = EDGE_CURVE('',#15687,#15689,#15691,.T.); +#15687 = VERTEX_POINT('',#15688); +#15688 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#15689 = VERTEX_POINT('',#15690); +#15690 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#15691 = LINE('',#15692,#15693); +#15692 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#15693 = VECTOR('',#15694,1.); +#15694 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15695 = ORIENTED_EDGE('',*,*,#15696,.T.); +#15696 = EDGE_CURVE('',#15689,#15697,#15699,.T.); +#15697 = VERTEX_POINT('',#15698); +#15698 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#15699 = LINE('',#15700,#15701); +#15700 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#15701 = VECTOR('',#15702,1.); +#15702 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15703 = ORIENTED_EDGE('',*,*,#15704,.T.); +#15704 = EDGE_CURVE('',#15697,#15705,#15707,.T.); +#15705 = VERTEX_POINT('',#15706); +#15706 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#15707 = LINE('',#15708,#15709); +#15708 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#15709 = VECTOR('',#15710,1.); +#15710 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15711 = ORIENTED_EDGE('',*,*,#15712,.T.); +#15712 = EDGE_CURVE('',#15705,#15713,#15715,.T.); +#15713 = VERTEX_POINT('',#15714); +#15714 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#15715 = LINE('',#15716,#15717); +#15716 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#15717 = VECTOR('',#15718,1.); +#15718 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15719 = ORIENTED_EDGE('',*,*,#15720,.T.); +#15720 = EDGE_CURVE('',#15713,#15721,#15723,.T.); +#15721 = VERTEX_POINT('',#15722); +#15722 = CARTESIAN_POINT('',(6.8,0.5,7.)); +#15723 = LINE('',#15724,#15725); +#15724 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#15725 = VECTOR('',#15726,1.); +#15726 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15727 = ORIENTED_EDGE('',*,*,#15728,.F.); +#15728 = EDGE_CURVE('',#15729,#15721,#15731,.T.); +#15729 = VERTEX_POINT('',#15730); +#15730 = CARTESIAN_POINT('',(6.8,-2.85,7.)); +#15731 = LINE('',#15732,#15733); +#15732 = CARTESIAN_POINT('',(6.8,-2.65,7.)); +#15733 = VECTOR('',#15734,1.); +#15734 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15735 = ORIENTED_EDGE('',*,*,#15736,.F.); +#15736 = EDGE_CURVE('',#15737,#15729,#15739,.T.); +#15737 = VERTEX_POINT('',#15738); +#15738 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#15739 = LINE('',#15740,#15741); +#15740 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#15741 = VECTOR('',#15742,1.); +#15742 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15743 = ORIENTED_EDGE('',*,*,#15744,.F.); +#15744 = EDGE_CURVE('',#15687,#15737,#15745,.T.); +#15745 = LINE('',#15746,#15747); +#15746 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#15747 = VECTOR('',#15748,1.); +#15748 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15749 = PLANE('',#15750); +#15750 = AXIS2_PLACEMENT_3D('',#15751,#15752,#15753); +#15751 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#15752 = DIRECTION('',(0.,0.,1.)); +#15753 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15754 = ADVANCED_FACE('',(#15755),#15788,.T.); +#15755 = FACE_BOUND('',#15756,.T.); +#15756 = EDGE_LOOP('',(#15757,#15767,#15775,#15781,#15782)); +#15757 = ORIENTED_EDGE('',*,*,#15758,.T.); +#15758 = EDGE_CURVE('',#15759,#15761,#15763,.T.); +#15759 = VERTEX_POINT('',#15760); +#15760 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#15761 = VERTEX_POINT('',#15762); +#15762 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#15763 = LINE('',#15764,#15765); +#15764 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#15765 = VECTOR('',#15766,1.); +#15766 = DIRECTION('',(-0.,0.,-1.)); +#15767 = ORIENTED_EDGE('',*,*,#15768,.T.); +#15768 = EDGE_CURVE('',#15761,#15769,#15771,.T.); +#15769 = VERTEX_POINT('',#15770); +#15770 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#15771 = LINE('',#15772,#15773); +#15772 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#15773 = VECTOR('',#15774,1.); +#15774 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15775 = ORIENTED_EDGE('',*,*,#15776,.T.); +#15776 = EDGE_CURVE('',#15769,#15689,#15777,.T.); +#15777 = LINE('',#15778,#15779); +#15778 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#15779 = VECTOR('',#15780,1.); +#15780 = DIRECTION('',(0.,0.,1.)); +#15781 = ORIENTED_EDGE('',*,*,#15686,.F.); +#15782 = ORIENTED_EDGE('',*,*,#15783,.T.); +#15783 = EDGE_CURVE('',#15687,#15759,#15784,.T.); +#15784 = LINE('',#15785,#15786); +#15785 = CARTESIAN_POINT('',(1.4,0.5,3.8)); +#15786 = VECTOR('',#15787,1.); +#15787 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#15788 = PLANE('',#15789); +#15789 = AXIS2_PLACEMENT_3D('',#15790,#15791,#15792); +#15790 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#15791 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15792 = DIRECTION('',(0.,-0.,1.)); +#15793 = ADVANCED_FACE('',(#15794),#15812,.F.); +#15794 = FACE_BOUND('',#15795,.T.); +#15795 = EDGE_LOOP('',(#15796,#15797,#15798,#15806)); +#15796 = ORIENTED_EDGE('',*,*,#15783,.F.); +#15797 = ORIENTED_EDGE('',*,*,#15744,.T.); +#15798 = ORIENTED_EDGE('',*,*,#15799,.T.); +#15799 = EDGE_CURVE('',#15737,#15800,#15802,.T.); +#15800 = VERTEX_POINT('',#15801); +#15801 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#15802 = LINE('',#15803,#15804); +#15803 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#15804 = VECTOR('',#15805,1.); +#15805 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#15806 = ORIENTED_EDGE('',*,*,#15807,.F.); +#15807 = EDGE_CURVE('',#15759,#15800,#15808,.T.); +#15808 = LINE('',#15809,#15810); +#15809 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#15810 = VECTOR('',#15811,1.); +#15811 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15812 = PLANE('',#15813); +#15813 = AXIS2_PLACEMENT_3D('',#15814,#15815,#15816); +#15814 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#15815 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#15816 = DIRECTION('',(1.224646799147E-16,1.,-2.105272540809E-29)); +#15817 = ADVANCED_FACE('',(#15818),#15877,.F.); +#15818 = FACE_BOUND('',#15819,.F.); +#15819 = EDGE_LOOP('',(#15820,#15830,#15838,#15846,#15854,#15863,#15869, + #15870,#15871)); +#15820 = ORIENTED_EDGE('',*,*,#15821,.F.); +#15821 = EDGE_CURVE('',#15822,#15824,#15826,.T.); +#15822 = VERTEX_POINT('',#15823); +#15823 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#15824 = VERTEX_POINT('',#15825); +#15825 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#15826 = LINE('',#15827,#15828); +#15827 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#15828 = VECTOR('',#15829,1.); +#15829 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15830 = ORIENTED_EDGE('',*,*,#15831,.T.); +#15831 = EDGE_CURVE('',#15822,#15832,#15834,.T.); +#15832 = VERTEX_POINT('',#15833); +#15833 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#15834 = LINE('',#15835,#15836); +#15835 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#15836 = VECTOR('',#15837,1.); +#15837 = DIRECTION('',(0.,0.,1.)); +#15838 = ORIENTED_EDGE('',*,*,#15839,.T.); +#15839 = EDGE_CURVE('',#15832,#15840,#15842,.T.); +#15840 = VERTEX_POINT('',#15841); +#15841 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#15842 = LINE('',#15843,#15844); +#15843 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#15844 = VECTOR('',#15845,1.); +#15845 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15846 = ORIENTED_EDGE('',*,*,#15847,.T.); +#15847 = EDGE_CURVE('',#15840,#15848,#15850,.T.); +#15848 = VERTEX_POINT('',#15849); +#15849 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#15850 = LINE('',#15851,#15852); +#15851 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#15852 = VECTOR('',#15853,1.); +#15853 = DIRECTION('',(-0.,0.,-1.)); +#15854 = ORIENTED_EDGE('',*,*,#15855,.F.); +#15855 = EDGE_CURVE('',#15856,#15848,#15858,.T.); +#15856 = VERTEX_POINT('',#15857); +#15857 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#15858 = CIRCLE('',#15859,0.5); +#15859 = AXIS2_PLACEMENT_3D('',#15860,#15861,#15862); +#15860 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#15861 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15862 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15863 = ORIENTED_EDGE('',*,*,#15864,.T.); +#15864 = EDGE_CURVE('',#15856,#15769,#15865,.T.); +#15865 = LINE('',#15866,#15867); +#15866 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#15867 = VECTOR('',#15868,1.); +#15868 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15869 = ORIENTED_EDGE('',*,*,#15776,.T.); +#15870 = ORIENTED_EDGE('',*,*,#15696,.T.); +#15871 = ORIENTED_EDGE('',*,*,#15872,.F.); +#15872 = EDGE_CURVE('',#15824,#15697,#15873,.T.); +#15873 = LINE('',#15874,#15875); +#15874 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#15875 = VECTOR('',#15876,1.); +#15876 = DIRECTION('',(0.,0.,1.)); +#15877 = PLANE('',#15878); +#15878 = AXIS2_PLACEMENT_3D('',#15879,#15880,#15881); +#15879 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#15880 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15881 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15882 = ADVANCED_FACE('',(#15883),#15901,.F.); +#15883 = FACE_BOUND('',#15884,.T.); +#15884 = EDGE_LOOP('',(#15885,#15886,#15887,#15895)); +#15885 = ORIENTED_EDGE('',*,*,#15799,.F.); +#15886 = ORIENTED_EDGE('',*,*,#15736,.T.); +#15887 = ORIENTED_EDGE('',*,*,#15888,.T.); +#15888 = EDGE_CURVE('',#15729,#15889,#15891,.T.); +#15889 = VERTEX_POINT('',#15890); +#15890 = CARTESIAN_POINT('',(6.6,-2.65,6.8)); +#15891 = LINE('',#15892,#15893); +#15892 = CARTESIAN_POINT('',(5.3,-1.35,5.5)); +#15893 = VECTOR('',#15894,1.); +#15894 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#15895 = ORIENTED_EDGE('',*,*,#15896,.F.); +#15896 = EDGE_CURVE('',#15800,#15889,#15897,.T.); +#15897 = LINE('',#15898,#15899); +#15898 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#15899 = VECTOR('',#15900,1.); +#15900 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15901 = PLANE('',#15902); +#15902 = AXIS2_PLACEMENT_3D('',#15903,#15904,#15905); +#15903 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#15904 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#15905 = DIRECTION('',(-1.,1.224646799147E-16,-2.105272540809E-29)); +#15906 = ADVANCED_FACE('',(#15907),#16021,.F.); +#15907 = FACE_BOUND('',#15908,.F.); +#15908 = EDGE_LOOP('',(#15909,#15917,#15918,#15919,#15927,#15935,#15943, + #15951,#15959,#15967,#15975,#15983,#15991,#15999,#16007,#16015)); +#15909 = ORIENTED_EDGE('',*,*,#15910,.F.); +#15910 = EDGE_CURVE('',#15824,#15911,#15913,.T.); +#15911 = VERTEX_POINT('',#15912); +#15912 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#15913 = LINE('',#15914,#15915); +#15914 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#15915 = VECTOR('',#15916,1.); +#15916 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15917 = ORIENTED_EDGE('',*,*,#15872,.T.); +#15918 = ORIENTED_EDGE('',*,*,#15704,.T.); +#15919 = ORIENTED_EDGE('',*,*,#15920,.F.); +#15920 = EDGE_CURVE('',#15921,#15705,#15923,.T.); +#15921 = VERTEX_POINT('',#15922); +#15922 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#15923 = LINE('',#15924,#15925); +#15924 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#15925 = VECTOR('',#15926,1.); +#15926 = DIRECTION('',(0.,0.,1.)); +#15927 = ORIENTED_EDGE('',*,*,#15928,.F.); +#15928 = EDGE_CURVE('',#15929,#15921,#15931,.T.); +#15929 = VERTEX_POINT('',#15930); +#15930 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#15931 = LINE('',#15932,#15933); +#15932 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#15933 = VECTOR('',#15934,1.); +#15934 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15935 = ORIENTED_EDGE('',*,*,#15936,.F.); +#15936 = EDGE_CURVE('',#15937,#15929,#15939,.T.); +#15937 = VERTEX_POINT('',#15938); +#15938 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#15939 = LINE('',#15940,#15941); +#15940 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#15941 = VECTOR('',#15942,1.); +#15942 = DIRECTION('',(-0.,0.,-1.)); +#15943 = ORIENTED_EDGE('',*,*,#15944,.T.); +#15944 = EDGE_CURVE('',#15937,#15945,#15947,.T.); +#15945 = VERTEX_POINT('',#15946); +#15946 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#15947 = LINE('',#15948,#15949); +#15948 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#15949 = VECTOR('',#15950,1.); +#15950 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15951 = ORIENTED_EDGE('',*,*,#15952,.T.); +#15952 = EDGE_CURVE('',#15945,#15953,#15955,.T.); +#15953 = VERTEX_POINT('',#15954); +#15954 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#15955 = LINE('',#15956,#15957); +#15956 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#15957 = VECTOR('',#15958,1.); +#15958 = DIRECTION('',(-0.,0.,-1.)); +#15959 = ORIENTED_EDGE('',*,*,#15960,.F.); +#15960 = EDGE_CURVE('',#15961,#15953,#15963,.T.); +#15961 = VERTEX_POINT('',#15962); +#15962 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#15963 = LINE('',#15964,#15965); +#15964 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#15965 = VECTOR('',#15966,1.); +#15966 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15967 = ORIENTED_EDGE('',*,*,#15968,.F.); +#15968 = EDGE_CURVE('',#15969,#15961,#15971,.T.); +#15969 = VERTEX_POINT('',#15970); +#15970 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#15971 = LINE('',#15972,#15973); +#15972 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#15973 = VECTOR('',#15974,1.); +#15974 = DIRECTION('',(-0.,0.,-1.)); +#15975 = ORIENTED_EDGE('',*,*,#15976,.T.); +#15976 = EDGE_CURVE('',#15969,#15977,#15979,.T.); +#15977 = VERTEX_POINT('',#15978); +#15978 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#15979 = LINE('',#15980,#15981); +#15980 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#15981 = VECTOR('',#15982,1.); +#15982 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15983 = ORIENTED_EDGE('',*,*,#15984,.T.); +#15984 = EDGE_CURVE('',#15977,#15985,#15987,.T.); +#15985 = VERTEX_POINT('',#15986); +#15986 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#15987 = LINE('',#15988,#15989); +#15988 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#15989 = VECTOR('',#15990,1.); +#15990 = DIRECTION('',(-0.,0.,-1.)); +#15991 = ORIENTED_EDGE('',*,*,#15992,.F.); +#15992 = EDGE_CURVE('',#15993,#15985,#15995,.T.); +#15993 = VERTEX_POINT('',#15994); +#15994 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#15995 = LINE('',#15996,#15997); +#15996 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#15997 = VECTOR('',#15998,1.); +#15998 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15999 = ORIENTED_EDGE('',*,*,#16000,.F.); +#16000 = EDGE_CURVE('',#16001,#15993,#16003,.T.); +#16001 = VERTEX_POINT('',#16002); +#16002 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#16003 = LINE('',#16004,#16005); +#16004 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#16005 = VECTOR('',#16006,1.); +#16006 = DIRECTION('',(-0.,0.,-1.)); +#16007 = ORIENTED_EDGE('',*,*,#16008,.T.); +#16008 = EDGE_CURVE('',#16001,#16009,#16011,.T.); +#16009 = VERTEX_POINT('',#16010); +#16010 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#16011 = LINE('',#16012,#16013); +#16012 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#16013 = VECTOR('',#16014,1.); +#16014 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16015 = ORIENTED_EDGE('',*,*,#16016,.T.); +#16016 = EDGE_CURVE('',#16009,#15911,#16017,.T.); +#16017 = LINE('',#16018,#16019); +#16018 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#16019 = VECTOR('',#16020,1.); +#16020 = DIRECTION('',(-0.,0.,-1.)); +#16021 = PLANE('',#16022); +#16022 = AXIS2_PLACEMENT_3D('',#16023,#16024,#16025); +#16023 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#16024 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16025 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#16026 = ADVANCED_FACE('',(#16027),#16045,.F.); +#16027 = FACE_BOUND('',#16028,.T.); +#16028 = EDGE_LOOP('',(#16029,#16030,#16031,#16039)); +#16029 = ORIENTED_EDGE('',*,*,#15888,.F.); +#16030 = ORIENTED_EDGE('',*,*,#15728,.T.); +#16031 = ORIENTED_EDGE('',*,*,#16032,.T.); +#16032 = EDGE_CURVE('',#15721,#16033,#16035,.T.); +#16033 = VERTEX_POINT('',#16034); +#16034 = CARTESIAN_POINT('',(6.6,0.5,6.8)); +#16035 = LINE('',#16036,#16037); +#16036 = CARTESIAN_POINT('',(6.075,0.5,6.275)); +#16037 = VECTOR('',#16038,1.); +#16038 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#16039 = ORIENTED_EDGE('',*,*,#16040,.F.); +#16040 = EDGE_CURVE('',#15889,#16033,#16041,.T.); +#16041 = LINE('',#16042,#16043); +#16042 = CARTESIAN_POINT('',(6.6,-2.65,6.8)); +#16043 = VECTOR('',#16044,1.); +#16044 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16045 = PLANE('',#16046); +#16046 = AXIS2_PLACEMENT_3D('',#16047,#16048,#16049); +#16047 = CARTESIAN_POINT('',(6.7,-2.65,6.9)); +#16048 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#16049 = DIRECTION('',(-1.224646799147E-16,-1.,-2.105272540809E-29)); +#16050 = ADVANCED_FACE('',(#16051),#16110,.F.); +#16051 = FACE_BOUND('',#16052,.F.); +#16052 = EDGE_LOOP('',(#16053,#16061,#16062,#16063,#16071,#16079,#16088, + #16096,#16104)); +#16053 = ORIENTED_EDGE('',*,*,#16054,.F.); +#16054 = EDGE_CURVE('',#15921,#16055,#16057,.T.); +#16055 = VERTEX_POINT('',#16056); +#16056 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#16057 = LINE('',#16058,#16059); +#16058 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#16059 = VECTOR('',#16060,1.); +#16060 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16061 = ORIENTED_EDGE('',*,*,#15920,.T.); +#16062 = ORIENTED_EDGE('',*,*,#15712,.T.); +#16063 = ORIENTED_EDGE('',*,*,#16064,.F.); +#16064 = EDGE_CURVE('',#16065,#15713,#16067,.T.); +#16065 = VERTEX_POINT('',#16066); +#16066 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#16067 = LINE('',#16068,#16069); +#16068 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#16069 = VECTOR('',#16070,1.); +#16070 = DIRECTION('',(0.,0.,1.)); +#16071 = ORIENTED_EDGE('',*,*,#16072,.F.); +#16072 = EDGE_CURVE('',#16073,#16065,#16075,.T.); +#16073 = VERTEX_POINT('',#16074); +#16074 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#16075 = LINE('',#16076,#16077); +#16076 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#16077 = VECTOR('',#16078,1.); +#16078 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16079 = ORIENTED_EDGE('',*,*,#16080,.F.); +#16080 = EDGE_CURVE('',#16081,#16073,#16083,.T.); +#16081 = VERTEX_POINT('',#16082); +#16082 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#16083 = CIRCLE('',#16084,0.5); +#16084 = AXIS2_PLACEMENT_3D('',#16085,#16086,#16087); +#16085 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#16086 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16087 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16088 = ORIENTED_EDGE('',*,*,#16089,.F.); +#16089 = EDGE_CURVE('',#16090,#16081,#16092,.T.); +#16090 = VERTEX_POINT('',#16091); +#16091 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#16092 = LINE('',#16093,#16094); +#16093 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#16094 = VECTOR('',#16095,1.); +#16095 = DIRECTION('',(-0.,0.,-1.)); +#16096 = ORIENTED_EDGE('',*,*,#16097,.T.); +#16097 = EDGE_CURVE('',#16090,#16098,#16100,.T.); +#16098 = VERTEX_POINT('',#16099); +#16099 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#16100 = LINE('',#16101,#16102); +#16101 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#16102 = VECTOR('',#16103,1.); +#16103 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16104 = ORIENTED_EDGE('',*,*,#16105,.F.); +#16105 = EDGE_CURVE('',#16055,#16098,#16106,.T.); +#16106 = LINE('',#16107,#16108); +#16107 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#16108 = VECTOR('',#16109,1.); +#16109 = DIRECTION('',(0.,0.,1.)); +#16110 = PLANE('',#16111); +#16111 = AXIS2_PLACEMENT_3D('',#16112,#16113,#16114); +#16112 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#16113 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16114 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16115 = ADVANCED_FACE('',(#16116),#16135,.T.); +#16116 = FACE_BOUND('',#16117,.T.); +#16117 = EDGE_LOOP('',(#16118,#16119,#16120,#16128,#16134)); +#16118 = ORIENTED_EDGE('',*,*,#15720,.F.); +#16119 = ORIENTED_EDGE('',*,*,#16064,.F.); +#16120 = ORIENTED_EDGE('',*,*,#16121,.T.); +#16121 = EDGE_CURVE('',#16065,#16122,#16124,.T.); +#16122 = VERTEX_POINT('',#16123); +#16123 = CARTESIAN_POINT('',(6.6,0.5,3.65)); +#16124 = LINE('',#16125,#16126); +#16125 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#16126 = VECTOR('',#16127,1.); +#16127 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16128 = ORIENTED_EDGE('',*,*,#16129,.T.); +#16129 = EDGE_CURVE('',#16122,#16033,#16130,.T.); +#16130 = LINE('',#16131,#16132); +#16131 = CARTESIAN_POINT('',(6.6,0.5,5.325)); +#16132 = VECTOR('',#16133,1.); +#16133 = DIRECTION('',(0.,0.,1.)); +#16134 = ORIENTED_EDGE('',*,*,#16032,.F.); +#16135 = PLANE('',#16136); +#16136 = AXIS2_PLACEMENT_3D('',#16137,#16138,#16139); +#16137 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#16138 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16139 = DIRECTION('',(0.,-0.,1.)); +#16140 = ADVANCED_FACE('',(#16141),#16184,.F.); +#16141 = FACE_BOUND('',#16142,.F.); +#16142 = EDGE_LOOP('',(#16143,#16144,#16152,#16161,#16169,#16177,#16183) + ); +#16143 = ORIENTED_EDGE('',*,*,#15758,.T.); +#16144 = ORIENTED_EDGE('',*,*,#16145,.T.); +#16145 = EDGE_CURVE('',#15761,#16146,#16148,.T.); +#16146 = VERTEX_POINT('',#16147); +#16147 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#16148 = LINE('',#16149,#16150); +#16149 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#16150 = VECTOR('',#16151,1.); +#16151 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16152 = ORIENTED_EDGE('',*,*,#16153,.T.); +#16153 = EDGE_CURVE('',#16146,#16154,#16156,.T.); +#16154 = VERTEX_POINT('',#16155); +#16155 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#16156 = CIRCLE('',#16157,0.5); +#16157 = AXIS2_PLACEMENT_3D('',#16158,#16159,#16160); +#16158 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#16159 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#16160 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16161 = ORIENTED_EDGE('',*,*,#16162,.T.); +#16162 = EDGE_CURVE('',#16154,#16163,#16165,.T.); +#16163 = VERTEX_POINT('',#16164); +#16164 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#16165 = LINE('',#16166,#16167); +#16166 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#16167 = VECTOR('',#16168,1.); +#16168 = DIRECTION('',(0.,0.,-1.)); +#16169 = ORIENTED_EDGE('',*,*,#16170,.T.); +#16170 = EDGE_CURVE('',#16163,#16171,#16173,.T.); +#16171 = VERTEX_POINT('',#16172); +#16172 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#16173 = LINE('',#16174,#16175); +#16174 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#16175 = VECTOR('',#16176,1.); +#16176 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16177 = ORIENTED_EDGE('',*,*,#16178,.F.); +#16178 = EDGE_CURVE('',#15800,#16171,#16179,.T.); +#16179 = LINE('',#16180,#16181); +#16180 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#16181 = VECTOR('',#16182,1.); +#16182 = DIRECTION('',(0.,0.,-1.)); +#16183 = ORIENTED_EDGE('',*,*,#15807,.F.); +#16184 = PLANE('',#16185); +#16185 = AXIS2_PLACEMENT_3D('',#16186,#16187,#16188); +#16186 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#16187 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16188 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16189 = ADVANCED_FACE('',(#16190),#16201,.T.); +#16190 = FACE_BOUND('',#16191,.T.); +#16191 = EDGE_LOOP('',(#16192,#16193,#16199,#16200)); +#16192 = ORIENTED_EDGE('',*,*,#16145,.T.); +#16193 = ORIENTED_EDGE('',*,*,#16194,.T.); +#16194 = EDGE_CURVE('',#16146,#15856,#16195,.T.); +#16195 = LINE('',#16196,#16197); +#16196 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#16197 = VECTOR('',#16198,1.); +#16198 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16199 = ORIENTED_EDGE('',*,*,#15864,.T.); +#16200 = ORIENTED_EDGE('',*,*,#15768,.F.); +#16201 = PLANE('',#16202); +#16202 = AXIS2_PLACEMENT_3D('',#16203,#16204,#16205); +#16203 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#16204 = DIRECTION('',(0.,0.,1.)); +#16205 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16206 = ADVANCED_FACE('',(#16207),#16225,.F.); +#16207 = FACE_BOUND('',#16208,.F.); +#16208 = EDGE_LOOP('',(#16209,#16210,#16211,#16219)); +#16209 = ORIENTED_EDGE('',*,*,#15821,.T.); +#16210 = ORIENTED_EDGE('',*,*,#15910,.T.); +#16211 = ORIENTED_EDGE('',*,*,#16212,.T.); +#16212 = EDGE_CURVE('',#15911,#16213,#16215,.T.); +#16213 = VERTEX_POINT('',#16214); +#16214 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#16215 = LINE('',#16216,#16217); +#16216 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#16217 = VECTOR('',#16218,1.); +#16218 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16219 = ORIENTED_EDGE('',*,*,#16220,.T.); +#16220 = EDGE_CURVE('',#16213,#15822,#16221,.T.); +#16221 = LINE('',#16222,#16223); +#16222 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#16223 = VECTOR('',#16224,1.); +#16224 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16225 = PLANE('',#16226); +#16226 = AXIS2_PLACEMENT_3D('',#16227,#16228,#16229); +#16227 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#16228 = DIRECTION('',(0.,0.,1.)); +#16229 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16230 = ADVANCED_FACE('',(#16231),#16242,.F.); +#16231 = FACE_BOUND('',#16232,.F.); +#16232 = EDGE_LOOP('',(#16233,#16234,#16235,#16241)); +#16233 = ORIENTED_EDGE('',*,*,#16194,.T.); +#16234 = ORIENTED_EDGE('',*,*,#15855,.T.); +#16235 = ORIENTED_EDGE('',*,*,#16236,.F.); +#16236 = EDGE_CURVE('',#16154,#15848,#16237,.T.); +#16237 = LINE('',#16238,#16239); +#16238 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#16239 = VECTOR('',#16240,1.); +#16240 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16241 = ORIENTED_EDGE('',*,*,#16153,.F.); +#16242 = CYLINDRICAL_SURFACE('',#16243,0.5); +#16243 = AXIS2_PLACEMENT_3D('',#16244,#16245,#16246); +#16244 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#16245 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#16246 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16247 = ADVANCED_FACE('',(#16248),#16412,.T.); +#16248 = FACE_BOUND('',#16249,.T.); +#16249 = EDGE_LOOP('',(#16250,#16251,#16259,#16267,#16275,#16283,#16291, + #16300,#16308,#16316,#16324,#16332,#16340,#16349,#16357,#16365, + #16373,#16381,#16387,#16388,#16389,#16390,#16398,#16406)); +#16250 = ORIENTED_EDGE('',*,*,#16089,.F.); +#16251 = ORIENTED_EDGE('',*,*,#16252,.T.); +#16252 = EDGE_CURVE('',#16090,#16253,#16255,.T.); +#16253 = VERTEX_POINT('',#16254); +#16254 = CARTESIAN_POINT('',(5.5,1.5,7.)); +#16255 = LINE('',#16256,#16257); +#16256 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#16257 = VECTOR('',#16258,1.); +#16258 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16259 = ORIENTED_EDGE('',*,*,#16260,.T.); +#16260 = EDGE_CURVE('',#16253,#16261,#16263,.T.); +#16261 = VERTEX_POINT('',#16262); +#16262 = CARTESIAN_POINT('',(5.5,1.5,6.1)); +#16263 = LINE('',#16264,#16265); +#16264 = CARTESIAN_POINT('',(5.5,1.5,5.327450166113)); +#16265 = VECTOR('',#16266,1.); +#16266 = DIRECTION('',(-4.93432455389E-16,8.449221308824E-17,-1.)); +#16267 = ORIENTED_EDGE('',*,*,#16268,.T.); +#16268 = EDGE_CURVE('',#16261,#16269,#16271,.T.); +#16269 = VERTEX_POINT('',#16270); +#16270 = CARTESIAN_POINT('',(5.25,1.5,5.85)); +#16271 = LINE('',#16272,#16273); +#16272 = CARTESIAN_POINT('',(4.238725083056,1.5,4.838725083056)); +#16273 = VECTOR('',#16274,1.); +#16274 = DIRECTION('',(-0.707106781187,1.463406224556E-16, + -0.707106781187)); +#16275 = ORIENTED_EDGE('',*,*,#16276,.T.); +#16276 = EDGE_CURVE('',#16269,#16277,#16279,.T.); +#16277 = VERTEX_POINT('',#16278); +#16278 = CARTESIAN_POINT('',(5.5,1.5,5.6)); +#16279 = LINE('',#16280,#16281); +#16280 = CARTESIAN_POINT('',(5.011274916944,1.5,6.088725083056)); +#16281 = VECTOR('',#16282,1.); +#16282 = DIRECTION('',(0.707106781187,-2.685058879138E-17, + -0.707106781187)); +#16283 = ORIENTED_EDGE('',*,*,#16284,.T.); +#16284 = EDGE_CURVE('',#16277,#16285,#16287,.T.); +#16285 = VERTEX_POINT('',#16286); +#16286 = CARTESIAN_POINT('',(5.5,1.5,3.85)); +#16287 = LINE('',#16288,#16289); +#16288 = CARTESIAN_POINT('',(5.5,1.5,3.827450166113)); +#16289 = VECTOR('',#16290,1.); +#16290 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#16291 = ORIENTED_EDGE('',*,*,#16292,.F.); +#16292 = EDGE_CURVE('',#16293,#16285,#16295,.T.); +#16293 = VERTEX_POINT('',#16294); +#16294 = CARTESIAN_POINT('',(4.75,1.5,3.1)); +#16295 = CIRCLE('',#16296,0.75); +#16296 = AXIS2_PLACEMENT_3D('',#16297,#16298,#16299); +#16297 = CARTESIAN_POINT('',(4.75,1.5,3.85)); +#16298 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16299 = DIRECTION('',(-0.,0.,-1.)); +#16300 = ORIENTED_EDGE('',*,*,#16301,.T.); +#16301 = EDGE_CURVE('',#16293,#16302,#16304,.T.); +#16302 = VERTEX_POINT('',#16303); +#16303 = CARTESIAN_POINT('',(4.,1.5,3.1)); +#16304 = LINE('',#16305,#16306); +#16305 = CARTESIAN_POINT('',(3.25,1.5,3.1)); +#16306 = VECTOR('',#16307,1.); +#16307 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16308 = ORIENTED_EDGE('',*,*,#16309,.T.); +#16309 = EDGE_CURVE('',#16302,#16310,#16312,.T.); +#16310 = VERTEX_POINT('',#16311); +#16311 = CARTESIAN_POINT('',(4.,1.5,7.)); +#16312 = LINE('',#16313,#16314); +#16313 = CARTESIAN_POINT('',(4.,1.5,5.777450166113)); +#16314 = VECTOR('',#16315,1.); +#16315 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#16316 = ORIENTED_EDGE('',*,*,#16317,.T.); +#16317 = EDGE_CURVE('',#16310,#16318,#16320,.T.); +#16318 = VERTEX_POINT('',#16319); +#16319 = CARTESIAN_POINT('',(1.,1.5,7.)); +#16320 = LINE('',#16321,#16322); +#16321 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#16322 = VECTOR('',#16323,1.); +#16323 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16324 = ORIENTED_EDGE('',*,*,#16325,.F.); +#16325 = EDGE_CURVE('',#16326,#16318,#16328,.T.); +#16326 = VERTEX_POINT('',#16327); +#16327 = CARTESIAN_POINT('',(1.,1.5,3.1)); +#16328 = LINE('',#16329,#16330); +#16329 = CARTESIAN_POINT('',(1.,1.5,5.777450166113)); +#16330 = VECTOR('',#16331,1.); +#16331 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#16332 = ORIENTED_EDGE('',*,*,#16333,.F.); +#16333 = EDGE_CURVE('',#16334,#16326,#16336,.T.); +#16334 = VERTEX_POINT('',#16335); +#16335 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#16336 = LINE('',#16337,#16338); +#16337 = CARTESIAN_POINT('',(1.75,1.5,3.1)); +#16338 = VECTOR('',#16339,1.); +#16339 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#16340 = ORIENTED_EDGE('',*,*,#16341,.F.); +#16341 = EDGE_CURVE('',#16342,#16334,#16344,.T.); +#16342 = VERTEX_POINT('',#16343); +#16343 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#16344 = CIRCLE('',#16345,0.75); +#16345 = AXIS2_PLACEMENT_3D('',#16346,#16347,#16348); +#16346 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#16347 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16348 = DIRECTION('',(-0.,0.,-1.)); +#16349 = ORIENTED_EDGE('',*,*,#16350,.F.); +#16350 = EDGE_CURVE('',#16351,#16342,#16353,.T.); +#16351 = VERTEX_POINT('',#16352); +#16352 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#16353 = LINE('',#16354,#16355); +#16354 = CARTESIAN_POINT('',(-0.5,1.5,3.827450166113)); +#16355 = VECTOR('',#16356,1.); +#16356 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#16357 = ORIENTED_EDGE('',*,*,#16358,.F.); +#16358 = EDGE_CURVE('',#16359,#16351,#16361,.T.); +#16359 = VERTEX_POINT('',#16360); +#16360 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#16361 = LINE('',#16362,#16363); +#16362 = CARTESIAN_POINT('',(-1.127491694352E-02,1.5,6.088725083056)); +#16363 = VECTOR('',#16364,1.); +#16364 = DIRECTION('',(-0.707106781187,1.463406224556E-16, + -0.707106781187)); +#16365 = ORIENTED_EDGE('',*,*,#16366,.F.); +#16366 = EDGE_CURVE('',#16367,#16359,#16369,.T.); +#16367 = VERTEX_POINT('',#16368); +#16368 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#16369 = LINE('',#16370,#16371); +#16370 = CARTESIAN_POINT('',(0.761274916944,1.5,4.838725083056)); +#16371 = VECTOR('',#16372,1.); +#16372 = DIRECTION('',(0.707106781187,-2.685058879138E-17, + -0.707106781187)); +#16373 = ORIENTED_EDGE('',*,*,#16374,.F.); +#16374 = EDGE_CURVE('',#16375,#16367,#16377,.T.); +#16375 = VERTEX_POINT('',#16376); +#16376 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#16377 = LINE('',#16378,#16379); +#16378 = CARTESIAN_POINT('',(-0.5,1.5,5.327450166113)); +#16379 = VECTOR('',#16380,1.); +#16380 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#16381 = ORIENTED_EDGE('',*,*,#16382,.T.); +#16382 = EDGE_CURVE('',#16375,#15840,#16383,.T.); +#16383 = LINE('',#16384,#16385); +#16384 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#16385 = VECTOR('',#16386,1.); +#16386 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16387 = ORIENTED_EDGE('',*,*,#15847,.T.); +#16388 = ORIENTED_EDGE('',*,*,#16236,.F.); +#16389 = ORIENTED_EDGE('',*,*,#16162,.T.); +#16390 = ORIENTED_EDGE('',*,*,#16391,.F.); +#16391 = EDGE_CURVE('',#16392,#16163,#16394,.T.); +#16392 = VERTEX_POINT('',#16393); +#16393 = CARTESIAN_POINT('',(6.6,1.5,1.85)); +#16394 = LINE('',#16395,#16396); +#16395 = CARTESIAN_POINT('',(6.6,1.5,1.85)); +#16396 = VECTOR('',#16397,1.); +#16397 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16398 = ORIENTED_EDGE('',*,*,#16399,.F.); +#16399 = EDGE_CURVE('',#16400,#16392,#16402,.T.); +#16400 = VERTEX_POINT('',#16401); +#16401 = CARTESIAN_POINT('',(6.6,1.5,4.15)); +#16402 = LINE('',#16403,#16404); +#16403 = CARTESIAN_POINT('',(6.6,1.5,7.)); +#16404 = VECTOR('',#16405,1.); +#16405 = DIRECTION('',(0.,0.,-1.)); +#16406 = ORIENTED_EDGE('',*,*,#16407,.F.); +#16407 = EDGE_CURVE('',#16081,#16400,#16408,.T.); +#16408 = LINE('',#16409,#16410); +#16409 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#16410 = VECTOR('',#16411,1.); +#16411 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16412 = PLANE('',#16413); +#16413 = AXIS2_PLACEMENT_3D('',#16414,#16415,#16416); +#16414 = CARTESIAN_POINT('',(2.5,1.5,4.554900332226)); +#16415 = DIRECTION('',(-1.224646799147E-16,-1.,-8.449221308824E-17)); +#16416 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#16417 = ADVANCED_FACE('',(#16418),#16436,.T.); +#16418 = FACE_BOUND('',#16419,.T.); +#16419 = EDGE_LOOP('',(#16420,#16421,#16429,#16435)); +#16420 = ORIENTED_EDGE('',*,*,#16382,.F.); +#16421 = ORIENTED_EDGE('',*,*,#16422,.F.); +#16422 = EDGE_CURVE('',#16423,#16375,#16425,.T.); +#16423 = VERTEX_POINT('',#16424); +#16424 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#16425 = LINE('',#16426,#16427); +#16426 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#16427 = VECTOR('',#16428,1.); +#16428 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16429 = ORIENTED_EDGE('',*,*,#16430,.T.); +#16430 = EDGE_CURVE('',#16423,#15832,#16431,.T.); +#16431 = LINE('',#16432,#16433); +#16432 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#16433 = VECTOR('',#16434,1.); +#16434 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16435 = ORIENTED_EDGE('',*,*,#15839,.T.); +#16436 = PLANE('',#16437); +#16437 = AXIS2_PLACEMENT_3D('',#16438,#16439,#16440); +#16438 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#16439 = DIRECTION('',(0.,0.,1.)); +#16440 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16441 = ADVANCED_FACE('',(#16442),#16670,.F.); +#16442 = FACE_BOUND('',#16443,.F.); +#16443 = EDGE_LOOP('',(#16444,#16452,#16453,#16461,#16469,#16477,#16485, + #16493,#16502,#16510,#16518,#16526,#16534,#16542,#16551,#16559, + #16567,#16575,#16581,#16582,#16583,#16584,#16592,#16600,#16608, + #16616,#16624,#16632,#16640,#16648,#16656,#16664)); +#16444 = ORIENTED_EDGE('',*,*,#16445,.F.); +#16445 = EDGE_CURVE('',#16055,#16446,#16448,.T.); +#16446 = VERTEX_POINT('',#16447); +#16447 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#16448 = LINE('',#16449,#16450); +#16449 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#16450 = VECTOR('',#16451,1.); +#16451 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16452 = ORIENTED_EDGE('',*,*,#16105,.T.); +#16453 = ORIENTED_EDGE('',*,*,#16454,.T.); +#16454 = EDGE_CURVE('',#16098,#16455,#16457,.T.); +#16455 = VERTEX_POINT('',#16456); +#16456 = CARTESIAN_POINT('',(5.5,2.35,7.)); +#16457 = LINE('',#16458,#16459); +#16458 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#16459 = VECTOR('',#16460,1.); +#16460 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16461 = ORIENTED_EDGE('',*,*,#16462,.F.); +#16462 = EDGE_CURVE('',#16463,#16455,#16465,.T.); +#16463 = VERTEX_POINT('',#16464); +#16464 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#16465 = LINE('',#16466,#16467); +#16466 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#16467 = VECTOR('',#16468,1.); +#16468 = DIRECTION('',(4.93432455389E-16,-6.042804770875E-32,1.)); +#16469 = ORIENTED_EDGE('',*,*,#16470,.F.); +#16470 = EDGE_CURVE('',#16471,#16463,#16473,.T.); +#16471 = VERTEX_POINT('',#16472); +#16472 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#16473 = LINE('',#16474,#16475); +#16474 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#16475 = VECTOR('',#16476,1.); +#16476 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#16477 = ORIENTED_EDGE('',*,*,#16478,.F.); +#16478 = EDGE_CURVE('',#16479,#16471,#16481,.T.); +#16479 = VERTEX_POINT('',#16480); +#16480 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#16481 = LINE('',#16482,#16483); +#16482 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#16483 = VECTOR('',#16484,1.); +#16484 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#16485 = ORIENTED_EDGE('',*,*,#16486,.F.); +#16486 = EDGE_CURVE('',#16487,#16479,#16489,.T.); +#16487 = VERTEX_POINT('',#16488); +#16488 = CARTESIAN_POINT('',(5.5,2.35,3.85)); +#16489 = LINE('',#16490,#16491); +#16490 = CARTESIAN_POINT('',(5.5,2.35,3.1)); +#16491 = VECTOR('',#16492,1.); +#16492 = DIRECTION('',(0.,0.,1.)); +#16493 = ORIENTED_EDGE('',*,*,#16494,.F.); +#16494 = EDGE_CURVE('',#16495,#16487,#16497,.T.); +#16495 = VERTEX_POINT('',#16496); +#16496 = CARTESIAN_POINT('',(4.75,2.35,3.1)); +#16497 = CIRCLE('',#16498,0.75); +#16498 = AXIS2_PLACEMENT_3D('',#16499,#16500,#16501); +#16499 = CARTESIAN_POINT('',(4.75,2.35,3.85)); +#16500 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16501 = DIRECTION('',(0.,0.,1.)); +#16502 = ORIENTED_EDGE('',*,*,#16503,.F.); +#16503 = EDGE_CURVE('',#16504,#16495,#16506,.T.); +#16504 = VERTEX_POINT('',#16505); +#16505 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#16506 = LINE('',#16507,#16508); +#16507 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#16508 = VECTOR('',#16509,1.); +#16509 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#16510 = ORIENTED_EDGE('',*,*,#16511,.F.); +#16511 = EDGE_CURVE('',#16512,#16504,#16514,.T.); +#16512 = VERTEX_POINT('',#16513); +#16513 = CARTESIAN_POINT('',(4.,2.35,7.)); +#16514 = LINE('',#16515,#16516); +#16515 = CARTESIAN_POINT('',(4.,2.35,7.)); +#16516 = VECTOR('',#16517,1.); +#16517 = DIRECTION('',(-0.,0.,-1.)); +#16518 = ORIENTED_EDGE('',*,*,#16519,.T.); +#16519 = EDGE_CURVE('',#16512,#16520,#16522,.T.); +#16520 = VERTEX_POINT('',#16521); +#16521 = CARTESIAN_POINT('',(1.,2.35,7.)); +#16522 = LINE('',#16523,#16524); +#16523 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#16524 = VECTOR('',#16525,1.); +#16525 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16526 = ORIENTED_EDGE('',*,*,#16527,.T.); +#16527 = EDGE_CURVE('',#16520,#16528,#16530,.T.); +#16528 = VERTEX_POINT('',#16529); +#16529 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#16530 = LINE('',#16531,#16532); +#16531 = CARTESIAN_POINT('',(1.,2.35,7.)); +#16532 = VECTOR('',#16533,1.); +#16533 = DIRECTION('',(-0.,0.,-1.)); +#16534 = ORIENTED_EDGE('',*,*,#16535,.T.); +#16535 = EDGE_CURVE('',#16528,#16536,#16538,.T.); +#16536 = VERTEX_POINT('',#16537); +#16537 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#16538 = LINE('',#16539,#16540); +#16539 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#16540 = VECTOR('',#16541,1.); +#16541 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16542 = ORIENTED_EDGE('',*,*,#16543,.T.); +#16543 = EDGE_CURVE('',#16536,#16544,#16546,.T.); +#16544 = VERTEX_POINT('',#16545); +#16545 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#16546 = CIRCLE('',#16547,0.75); +#16547 = AXIS2_PLACEMENT_3D('',#16548,#16549,#16550); +#16548 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#16549 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#16550 = DIRECTION('',(0.,0.,1.)); +#16551 = ORIENTED_EDGE('',*,*,#16552,.T.); +#16552 = EDGE_CURVE('',#16544,#16553,#16555,.T.); +#16553 = VERTEX_POINT('',#16554); +#16554 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#16555 = LINE('',#16556,#16557); +#16556 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#16557 = VECTOR('',#16558,1.); +#16558 = DIRECTION('',(0.,0.,1.)); +#16559 = ORIENTED_EDGE('',*,*,#16560,.T.); +#16560 = EDGE_CURVE('',#16553,#16561,#16563,.T.); +#16561 = VERTEX_POINT('',#16562); +#16562 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#16563 = LINE('',#16564,#16565); +#16564 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#16565 = VECTOR('',#16566,1.); +#16566 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#16567 = ORIENTED_EDGE('',*,*,#16568,.T.); +#16568 = EDGE_CURVE('',#16561,#16569,#16571,.T.); +#16569 = VERTEX_POINT('',#16570); +#16570 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#16571 = LINE('',#16572,#16573); +#16572 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#16573 = VECTOR('',#16574,1.); +#16574 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#16575 = ORIENTED_EDGE('',*,*,#16576,.T.); +#16576 = EDGE_CURVE('',#16569,#16423,#16577,.T.); +#16577 = LINE('',#16578,#16579); +#16578 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#16579 = VECTOR('',#16580,1.); +#16580 = DIRECTION('',(0.,0.,1.)); +#16581 = ORIENTED_EDGE('',*,*,#16430,.T.); +#16582 = ORIENTED_EDGE('',*,*,#15831,.F.); +#16583 = ORIENTED_EDGE('',*,*,#16220,.F.); +#16584 = ORIENTED_EDGE('',*,*,#16585,.T.); +#16585 = EDGE_CURVE('',#16213,#16586,#16588,.T.); +#16586 = VERTEX_POINT('',#16587); +#16587 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#16588 = LINE('',#16589,#16590); +#16589 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#16590 = VECTOR('',#16591,1.); +#16591 = DIRECTION('',(0.,0.,1.)); +#16592 = ORIENTED_EDGE('',*,*,#16593,.F.); +#16593 = EDGE_CURVE('',#16594,#16586,#16596,.T.); +#16594 = VERTEX_POINT('',#16595); +#16595 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#16596 = LINE('',#16597,#16598); +#16597 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#16598 = VECTOR('',#16599,1.); +#16599 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16600 = ORIENTED_EDGE('',*,*,#16601,.F.); +#16601 = EDGE_CURVE('',#16602,#16594,#16604,.T.); +#16602 = VERTEX_POINT('',#16603); +#16603 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#16604 = LINE('',#16605,#16606); +#16605 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#16606 = VECTOR('',#16607,1.); +#16607 = DIRECTION('',(0.,0.,1.)); +#16608 = ORIENTED_EDGE('',*,*,#16609,.F.); +#16609 = EDGE_CURVE('',#16610,#16602,#16612,.T.); +#16610 = VERTEX_POINT('',#16611); +#16611 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#16612 = LINE('',#16613,#16614); +#16613 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#16614 = VECTOR('',#16615,1.); +#16615 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16616 = ORIENTED_EDGE('',*,*,#16617,.T.); +#16617 = EDGE_CURVE('',#16610,#16618,#16620,.T.); +#16618 = VERTEX_POINT('',#16619); +#16619 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#16620 = LINE('',#16621,#16622); +#16621 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#16622 = VECTOR('',#16623,1.); +#16623 = DIRECTION('',(0.,0.,1.)); +#16624 = ORIENTED_EDGE('',*,*,#16625,.F.); +#16625 = EDGE_CURVE('',#16626,#16618,#16628,.T.); +#16626 = VERTEX_POINT('',#16627); +#16627 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#16628 = LINE('',#16629,#16630); +#16629 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#16630 = VECTOR('',#16631,1.); +#16631 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16632 = ORIENTED_EDGE('',*,*,#16633,.F.); +#16633 = EDGE_CURVE('',#16634,#16626,#16636,.T.); +#16634 = VERTEX_POINT('',#16635); +#16635 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#16636 = LINE('',#16637,#16638); +#16637 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#16638 = VECTOR('',#16639,1.); +#16639 = DIRECTION('',(0.,0.,1.)); +#16640 = ORIENTED_EDGE('',*,*,#16641,.F.); +#16641 = EDGE_CURVE('',#16642,#16634,#16644,.T.); +#16642 = VERTEX_POINT('',#16643); +#16643 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#16644 = LINE('',#16645,#16646); +#16645 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#16646 = VECTOR('',#16647,1.); +#16647 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16648 = ORIENTED_EDGE('',*,*,#16649,.T.); +#16649 = EDGE_CURVE('',#16642,#16650,#16652,.T.); +#16650 = VERTEX_POINT('',#16651); +#16651 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#16652 = LINE('',#16653,#16654); +#16653 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#16654 = VECTOR('',#16655,1.); +#16655 = DIRECTION('',(0.,0.,1.)); +#16656 = ORIENTED_EDGE('',*,*,#16657,.F.); +#16657 = EDGE_CURVE('',#16658,#16650,#16660,.T.); +#16658 = VERTEX_POINT('',#16659); +#16659 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#16660 = LINE('',#16661,#16662); +#16661 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#16662 = VECTOR('',#16663,1.); +#16663 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16664 = ORIENTED_EDGE('',*,*,#16665,.F.); +#16665 = EDGE_CURVE('',#16446,#16658,#16666,.T.); +#16666 = LINE('',#16667,#16668); +#16667 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#16668 = VECTOR('',#16669,1.); +#16669 = DIRECTION('',(0.,0.,1.)); +#16670 = PLANE('',#16671); +#16671 = AXIS2_PLACEMENT_3D('',#16672,#16673,#16674); +#16672 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#16673 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16674 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16675 = ADVANCED_FACE('',(#16676),#16694,.F.); +#16676 = FACE_BOUND('',#16677,.F.); +#16677 = EDGE_LOOP('',(#16678,#16679,#16687,#16693)); +#16678 = ORIENTED_EDGE('',*,*,#16178,.T.); +#16679 = ORIENTED_EDGE('',*,*,#16680,.T.); +#16680 = EDGE_CURVE('',#16171,#16681,#16683,.T.); +#16681 = VERTEX_POINT('',#16682); +#16682 = CARTESIAN_POINT('',(6.6,-2.65,1.85)); +#16683 = LINE('',#16684,#16685); +#16684 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#16685 = VECTOR('',#16686,1.); +#16686 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#16687 = ORIENTED_EDGE('',*,*,#16688,.F.); +#16688 = EDGE_CURVE('',#15889,#16681,#16689,.T.); +#16689 = LINE('',#16690,#16691); +#16690 = CARTESIAN_POINT('',(6.6,-2.65,7.)); +#16691 = VECTOR('',#16692,1.); +#16692 = DIRECTION('',(0.,0.,-1.)); +#16693 = ORIENTED_EDGE('',*,*,#15896,.F.); +#16694 = PLANE('',#16695); +#16695 = AXIS2_PLACEMENT_3D('',#16696,#16697,#16698); +#16696 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#16697 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16698 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#16699 = ADVANCED_FACE('',(#16700),#16727,.T.); +#16700 = FACE_BOUND('',#16701,.T.); +#16701 = EDGE_LOOP('',(#16702,#16703,#16711,#16719,#16725,#16726)); +#16702 = ORIENTED_EDGE('',*,*,#16585,.T.); +#16703 = ORIENTED_EDGE('',*,*,#16704,.T.); +#16704 = EDGE_CURVE('',#16586,#16705,#16707,.T.); +#16705 = VERTEX_POINT('',#16706); +#16706 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#16707 = LINE('',#16708,#16709); +#16708 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#16709 = VECTOR('',#16710,1.); +#16710 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#16711 = ORIENTED_EDGE('',*,*,#16712,.T.); +#16712 = EDGE_CURVE('',#16705,#16713,#16715,.T.); +#16713 = VERTEX_POINT('',#16714); +#16714 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#16715 = LINE('',#16716,#16717); +#16716 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#16717 = VECTOR('',#16718,1.); +#16718 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16719 = ORIENTED_EDGE('',*,*,#16720,.T.); +#16720 = EDGE_CURVE('',#16713,#16009,#16721,.T.); +#16721 = LINE('',#16722,#16723); +#16722 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#16723 = VECTOR('',#16724,1.); +#16724 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16725 = ORIENTED_EDGE('',*,*,#16016,.T.); +#16726 = ORIENTED_EDGE('',*,*,#16212,.T.); +#16727 = PLANE('',#16728); +#16728 = AXIS2_PLACEMENT_3D('',#16729,#16730,#16731); +#16729 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#16730 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#16731 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#16732 = ADVANCED_FACE('',(#16733),#16751,.F.); +#16733 = FACE_BOUND('',#16734,.F.); +#16734 = EDGE_LOOP('',(#16735,#16743,#16744,#16745)); +#16735 = ORIENTED_EDGE('',*,*,#16736,.T.); +#16736 = EDGE_CURVE('',#16737,#16713,#16739,.T.); +#16737 = VERTEX_POINT('',#16738); +#16738 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#16739 = LINE('',#16740,#16741); +#16740 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#16741 = VECTOR('',#16742,1.); +#16742 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16743 = ORIENTED_EDGE('',*,*,#16720,.T.); +#16744 = ORIENTED_EDGE('',*,*,#16008,.F.); +#16745 = ORIENTED_EDGE('',*,*,#16746,.F.); +#16746 = EDGE_CURVE('',#16737,#16001,#16747,.T.); +#16747 = LINE('',#16748,#16749); +#16748 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#16749 = VECTOR('',#16750,1.); +#16750 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16751 = PLANE('',#16752); +#16752 = AXIS2_PLACEMENT_3D('',#16753,#16754,#16755); +#16753 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#16754 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#16755 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16756 = ADVANCED_FACE('',(#16757),#16782,.F.); +#16757 = FACE_BOUND('',#16758,.F.); +#16758 = EDGE_LOOP('',(#16759,#16760,#16768,#16774,#16775,#16776)); +#16759 = ORIENTED_EDGE('',*,*,#16601,.T.); +#16760 = ORIENTED_EDGE('',*,*,#16761,.T.); +#16761 = EDGE_CURVE('',#16594,#16762,#16764,.T.); +#16762 = VERTEX_POINT('',#16763); +#16763 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#16764 = LINE('',#16765,#16766); +#16765 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#16766 = VECTOR('',#16767,1.); +#16767 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#16768 = ORIENTED_EDGE('',*,*,#16769,.T.); +#16769 = EDGE_CURVE('',#16762,#16737,#16770,.T.); +#16770 = LINE('',#16771,#16772); +#16771 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#16772 = VECTOR('',#16773,1.); +#16773 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16774 = ORIENTED_EDGE('',*,*,#16746,.T.); +#16775 = ORIENTED_EDGE('',*,*,#16000,.T.); +#16776 = ORIENTED_EDGE('',*,*,#16777,.T.); +#16777 = EDGE_CURVE('',#15993,#16602,#16778,.T.); +#16778 = LINE('',#16779,#16780); +#16779 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#16780 = VECTOR('',#16781,1.); +#16781 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16782 = PLANE('',#16783); +#16783 = AXIS2_PLACEMENT_3D('',#16784,#16785,#16786); +#16784 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#16785 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#16786 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#16787 = ADVANCED_FACE('',(#16788),#16799,.F.); +#16788 = FACE_BOUND('',#16789,.F.); +#16789 = EDGE_LOOP('',(#16790,#16791,#16792,#16798)); +#16790 = ORIENTED_EDGE('',*,*,#16777,.F.); +#16791 = ORIENTED_EDGE('',*,*,#15992,.T.); +#16792 = ORIENTED_EDGE('',*,*,#16793,.T.); +#16793 = EDGE_CURVE('',#15985,#16610,#16794,.T.); +#16794 = LINE('',#16795,#16796); +#16795 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#16796 = VECTOR('',#16797,1.); +#16797 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16798 = ORIENTED_EDGE('',*,*,#16609,.T.); +#16799 = PLANE('',#16800); +#16800 = AXIS2_PLACEMENT_3D('',#16801,#16802,#16803); +#16801 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#16802 = DIRECTION('',(0.,0.,1.)); +#16803 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16804 = ADVANCED_FACE('',(#16805),#16832,.T.); +#16805 = FACE_BOUND('',#16806,.T.); +#16806 = EDGE_LOOP('',(#16807,#16808,#16816,#16824,#16830,#16831)); +#16807 = ORIENTED_EDGE('',*,*,#16617,.T.); +#16808 = ORIENTED_EDGE('',*,*,#16809,.T.); +#16809 = EDGE_CURVE('',#16618,#16810,#16812,.T.); +#16810 = VERTEX_POINT('',#16811); +#16811 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#16812 = LINE('',#16813,#16814); +#16813 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#16814 = VECTOR('',#16815,1.); +#16815 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#16816 = ORIENTED_EDGE('',*,*,#16817,.T.); +#16817 = EDGE_CURVE('',#16810,#16818,#16820,.T.); +#16818 = VERTEX_POINT('',#16819); +#16819 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#16820 = LINE('',#16821,#16822); +#16821 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#16822 = VECTOR('',#16823,1.); +#16823 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16824 = ORIENTED_EDGE('',*,*,#16825,.T.); +#16825 = EDGE_CURVE('',#16818,#15977,#16826,.T.); +#16826 = LINE('',#16827,#16828); +#16827 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#16828 = VECTOR('',#16829,1.); +#16829 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16830 = ORIENTED_EDGE('',*,*,#15984,.T.); +#16831 = ORIENTED_EDGE('',*,*,#16793,.T.); +#16832 = PLANE('',#16833); +#16833 = AXIS2_PLACEMENT_3D('',#16834,#16835,#16836); +#16834 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#16835 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#16836 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#16837 = ADVANCED_FACE('',(#16838),#16856,.F.); +#16838 = FACE_BOUND('',#16839,.F.); +#16839 = EDGE_LOOP('',(#16840,#16848,#16849,#16850)); +#16840 = ORIENTED_EDGE('',*,*,#16841,.T.); +#16841 = EDGE_CURVE('',#16842,#16818,#16844,.T.); +#16842 = VERTEX_POINT('',#16843); +#16843 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#16844 = LINE('',#16845,#16846); +#16845 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#16846 = VECTOR('',#16847,1.); +#16847 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16848 = ORIENTED_EDGE('',*,*,#16825,.T.); +#16849 = ORIENTED_EDGE('',*,*,#15976,.F.); +#16850 = ORIENTED_EDGE('',*,*,#16851,.F.); +#16851 = EDGE_CURVE('',#16842,#15969,#16852,.T.); +#16852 = LINE('',#16853,#16854); +#16853 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#16854 = VECTOR('',#16855,1.); +#16855 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16856 = PLANE('',#16857); +#16857 = AXIS2_PLACEMENT_3D('',#16858,#16859,#16860); +#16858 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#16859 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#16860 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16861 = ADVANCED_FACE('',(#16862),#16887,.F.); +#16862 = FACE_BOUND('',#16863,.F.); +#16863 = EDGE_LOOP('',(#16864,#16865,#16873,#16879,#16880,#16881)); +#16864 = ORIENTED_EDGE('',*,*,#16633,.T.); +#16865 = ORIENTED_EDGE('',*,*,#16866,.T.); +#16866 = EDGE_CURVE('',#16626,#16867,#16869,.T.); +#16867 = VERTEX_POINT('',#16868); +#16868 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#16869 = LINE('',#16870,#16871); +#16870 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#16871 = VECTOR('',#16872,1.); +#16872 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#16873 = ORIENTED_EDGE('',*,*,#16874,.T.); +#16874 = EDGE_CURVE('',#16867,#16842,#16875,.T.); +#16875 = LINE('',#16876,#16877); +#16876 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#16877 = VECTOR('',#16878,1.); +#16878 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16879 = ORIENTED_EDGE('',*,*,#16851,.T.); +#16880 = ORIENTED_EDGE('',*,*,#15968,.T.); +#16881 = ORIENTED_EDGE('',*,*,#16882,.T.); +#16882 = EDGE_CURVE('',#15961,#16634,#16883,.T.); +#16883 = LINE('',#16884,#16885); +#16884 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#16885 = VECTOR('',#16886,1.); +#16886 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16887 = PLANE('',#16888); +#16888 = AXIS2_PLACEMENT_3D('',#16889,#16890,#16891); +#16889 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#16890 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#16891 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#16892 = ADVANCED_FACE('',(#16893),#16904,.F.); +#16893 = FACE_BOUND('',#16894,.F.); +#16894 = EDGE_LOOP('',(#16895,#16896,#16902,#16903)); +#16895 = ORIENTED_EDGE('',*,*,#15960,.T.); +#16896 = ORIENTED_EDGE('',*,*,#16897,.T.); +#16897 = EDGE_CURVE('',#15953,#16642,#16898,.T.); +#16898 = LINE('',#16899,#16900); +#16899 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#16900 = VECTOR('',#16901,1.); +#16901 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16902 = ORIENTED_EDGE('',*,*,#16641,.T.); +#16903 = ORIENTED_EDGE('',*,*,#16882,.F.); +#16904 = PLANE('',#16905); +#16905 = AXIS2_PLACEMENT_3D('',#16906,#16907,#16908); +#16906 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#16907 = DIRECTION('',(0.,0.,1.)); +#16908 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16909 = ADVANCED_FACE('',(#16910),#16937,.T.); +#16910 = FACE_BOUND('',#16911,.T.); +#16911 = EDGE_LOOP('',(#16912,#16913,#16921,#16929,#16935,#16936)); +#16912 = ORIENTED_EDGE('',*,*,#16649,.T.); +#16913 = ORIENTED_EDGE('',*,*,#16914,.T.); +#16914 = EDGE_CURVE('',#16650,#16915,#16917,.T.); +#16915 = VERTEX_POINT('',#16916); +#16916 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#16917 = LINE('',#16918,#16919); +#16918 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#16919 = VECTOR('',#16920,1.); +#16920 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#16921 = ORIENTED_EDGE('',*,*,#16922,.T.); +#16922 = EDGE_CURVE('',#16915,#16923,#16925,.T.); +#16923 = VERTEX_POINT('',#16924); +#16924 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#16925 = LINE('',#16926,#16927); +#16926 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#16927 = VECTOR('',#16928,1.); +#16928 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16929 = ORIENTED_EDGE('',*,*,#16930,.T.); +#16930 = EDGE_CURVE('',#16923,#15945,#16931,.T.); +#16931 = LINE('',#16932,#16933); +#16932 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#16933 = VECTOR('',#16934,1.); +#16934 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16935 = ORIENTED_EDGE('',*,*,#15952,.T.); +#16936 = ORIENTED_EDGE('',*,*,#16897,.T.); +#16937 = PLANE('',#16938); +#16938 = AXIS2_PLACEMENT_3D('',#16939,#16940,#16941); +#16939 = CARTESIAN_POINT('',(4.25,-0.515451356496,0.330008245993)); +#16940 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#16941 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#16942 = ADVANCED_FACE('',(#16943),#16961,.F.); +#16943 = FACE_BOUND('',#16944,.F.); +#16944 = EDGE_LOOP('',(#16945,#16953,#16954,#16955)); +#16945 = ORIENTED_EDGE('',*,*,#16946,.T.); +#16946 = EDGE_CURVE('',#16947,#16923,#16949,.T.); +#16947 = VERTEX_POINT('',#16948); +#16948 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#16949 = LINE('',#16950,#16951); +#16950 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#16951 = VECTOR('',#16952,1.); +#16952 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16953 = ORIENTED_EDGE('',*,*,#16930,.T.); +#16954 = ORIENTED_EDGE('',*,*,#15944,.F.); +#16955 = ORIENTED_EDGE('',*,*,#16956,.F.); +#16956 = EDGE_CURVE('',#16947,#15937,#16957,.T.); +#16957 = LINE('',#16958,#16959); +#16958 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#16959 = VECTOR('',#16960,1.); +#16960 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16961 = PLANE('',#16962); +#16962 = AXIS2_PLACEMENT_3D('',#16963,#16964,#16965); +#16963 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#16964 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#16965 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#16966 = ADVANCED_FACE('',(#16967),#16992,.F.); +#16967 = FACE_BOUND('',#16968,.F.); +#16968 = EDGE_LOOP('',(#16969,#16970,#16978,#16984,#16985,#16986)); +#16969 = ORIENTED_EDGE('',*,*,#16665,.T.); +#16970 = ORIENTED_EDGE('',*,*,#16971,.T.); +#16971 = EDGE_CURVE('',#16658,#16972,#16974,.T.); +#16972 = VERTEX_POINT('',#16973); +#16973 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#16974 = LINE('',#16975,#16976); +#16975 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#16976 = VECTOR('',#16977,1.); +#16977 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#16978 = ORIENTED_EDGE('',*,*,#16979,.T.); +#16979 = EDGE_CURVE('',#16972,#16947,#16980,.T.); +#16980 = LINE('',#16981,#16982); +#16981 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#16982 = VECTOR('',#16983,1.); +#16983 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16984 = ORIENTED_EDGE('',*,*,#16956,.T.); +#16985 = ORIENTED_EDGE('',*,*,#15936,.T.); +#16986 = ORIENTED_EDGE('',*,*,#16987,.T.); +#16987 = EDGE_CURVE('',#15929,#16446,#16988,.T.); +#16988 = LINE('',#16989,#16990); +#16989 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#16990 = VECTOR('',#16991,1.); +#16991 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16992 = PLANE('',#16993); +#16993 = AXIS2_PLACEMENT_3D('',#16994,#16995,#16996); +#16994 = CARTESIAN_POINT('',(5.75,-0.515451356496,0.330008245993)); +#16995 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#16996 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#16997 = ADVANCED_FACE('',(#16998),#17004,.F.); +#16998 = FACE_BOUND('',#16999,.F.); +#16999 = EDGE_LOOP('',(#17000,#17001,#17002,#17003)); +#17000 = ORIENTED_EDGE('',*,*,#16054,.T.); +#17001 = ORIENTED_EDGE('',*,*,#16445,.T.); +#17002 = ORIENTED_EDGE('',*,*,#16987,.F.); +#17003 = ORIENTED_EDGE('',*,*,#15928,.T.); +#17004 = PLANE('',#17005); +#17005 = AXIS2_PLACEMENT_3D('',#17006,#17007,#17008); +#17006 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#17007 = DIRECTION('',(0.,0.,1.)); +#17008 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17009 = ADVANCED_FACE('',(#17010),#17037,.F.); +#17010 = FACE_BOUND('',#17011,.F.); +#17011 = EDGE_LOOP('',(#17012,#17013,#17014,#17015,#17021,#17022,#17031) + ); +#17012 = ORIENTED_EDGE('',*,*,#16129,.T.); +#17013 = ORIENTED_EDGE('',*,*,#16040,.F.); +#17014 = ORIENTED_EDGE('',*,*,#16688,.T.); +#17015 = ORIENTED_EDGE('',*,*,#17016,.T.); +#17016 = EDGE_CURVE('',#16681,#16392,#17017,.T.); +#17017 = LINE('',#17018,#17019); +#17018 = CARTESIAN_POINT('',(6.6,-2.65,1.85)); +#17019 = VECTOR('',#17020,1.); +#17020 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17021 = ORIENTED_EDGE('',*,*,#16399,.F.); +#17022 = ORIENTED_EDGE('',*,*,#17023,.F.); +#17023 = EDGE_CURVE('',#17024,#16400,#17026,.T.); +#17024 = VERTEX_POINT('',#17025); +#17025 = CARTESIAN_POINT('',(6.6,1.,3.65)); +#17026 = CIRCLE('',#17027,0.5); +#17027 = AXIS2_PLACEMENT_3D('',#17028,#17029,#17030); +#17028 = CARTESIAN_POINT('',(6.6,1.,4.15)); +#17029 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17030 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17031 = ORIENTED_EDGE('',*,*,#17032,.T.); +#17032 = EDGE_CURVE('',#17024,#16122,#17033,.T.); +#17033 = LINE('',#17034,#17035); +#17034 = CARTESIAN_POINT('',(6.6,-0.825,3.65)); +#17035 = VECTOR('',#17036,1.); +#17036 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17037 = PLANE('',#17038); +#17038 = AXIS2_PLACEMENT_3D('',#17039,#17040,#17041); +#17039 = CARTESIAN_POINT('',(6.6,-2.65,7.)); +#17040 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17041 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17042 = ADVANCED_FACE('',(#17043),#17054,.T.); +#17043 = FACE_BOUND('',#17044,.T.); +#17044 = EDGE_LOOP('',(#17045,#17046,#17047,#17048)); +#17045 = ORIENTED_EDGE('',*,*,#16252,.F.); +#17046 = ORIENTED_EDGE('',*,*,#16097,.T.); +#17047 = ORIENTED_EDGE('',*,*,#16454,.T.); +#17048 = ORIENTED_EDGE('',*,*,#17049,.T.); +#17049 = EDGE_CURVE('',#16455,#16253,#17050,.T.); +#17050 = LINE('',#17051,#17052); +#17051 = CARTESIAN_POINT('',(5.5,2.35,7.)); +#17052 = VECTOR('',#17053,1.); +#17053 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17054 = PLANE('',#17055); +#17055 = AXIS2_PLACEMENT_3D('',#17056,#17057,#17058); +#17056 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#17057 = DIRECTION('',(0.,0.,1.)); +#17058 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17059 = ADVANCED_FACE('',(#17060),#17071,.F.); +#17060 = FACE_BOUND('',#17061,.F.); +#17061 = EDGE_LOOP('',(#17062,#17068,#17069,#17070)); +#17062 = ORIENTED_EDGE('',*,*,#17063,.T.); +#17063 = EDGE_CURVE('',#16073,#17024,#17064,.T.); +#17064 = LINE('',#17065,#17066); +#17065 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#17066 = VECTOR('',#17067,1.); +#17067 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17068 = ORIENTED_EDGE('',*,*,#17023,.T.); +#17069 = ORIENTED_EDGE('',*,*,#16407,.F.); +#17070 = ORIENTED_EDGE('',*,*,#16080,.T.); +#17071 = CYLINDRICAL_SURFACE('',#17072,0.5); +#17072 = AXIS2_PLACEMENT_3D('',#17073,#17074,#17075); +#17073 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#17074 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#17075 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17076 = ADVANCED_FACE('',(#17077),#17083,.T.); +#17077 = FACE_BOUND('',#17078,.T.); +#17078 = EDGE_LOOP('',(#17079,#17080,#17081,#17082)); +#17079 = ORIENTED_EDGE('',*,*,#16072,.F.); +#17080 = ORIENTED_EDGE('',*,*,#17063,.T.); +#17081 = ORIENTED_EDGE('',*,*,#17032,.T.); +#17082 = ORIENTED_EDGE('',*,*,#16121,.F.); +#17083 = PLANE('',#17084); +#17084 = AXIS2_PLACEMENT_3D('',#17085,#17086,#17087); +#17085 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#17086 = DIRECTION('',(0.,0.,1.)); +#17087 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17088 = ADVANCED_FACE('',(#17089,#17095,#17129,#17163),#17197,.T.); +#17089 = FACE_BOUND('',#17090,.T.); +#17090 = EDGE_LOOP('',(#17091,#17092,#17093,#17094)); +#17091 = ORIENTED_EDGE('',*,*,#16391,.T.); +#17092 = ORIENTED_EDGE('',*,*,#16170,.T.); +#17093 = ORIENTED_EDGE('',*,*,#16680,.T.); +#17094 = ORIENTED_EDGE('',*,*,#17016,.T.); +#17095 = FACE_BOUND('',#17096,.T.); +#17096 = EDGE_LOOP('',(#17097,#17107,#17115,#17123)); +#17097 = ORIENTED_EDGE('',*,*,#17098,.F.); +#17098 = EDGE_CURVE('',#17099,#17101,#17103,.T.); +#17099 = VERTEX_POINT('',#17100); +#17100 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#17101 = VERTEX_POINT('',#17102); +#17102 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#17103 = LINE('',#17104,#17105); +#17104 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#17105 = VECTOR('',#17106,1.); +#17106 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17107 = ORIENTED_EDGE('',*,*,#17108,.T.); +#17108 = EDGE_CURVE('',#17099,#17109,#17111,.T.); +#17109 = VERTEX_POINT('',#17110); +#17110 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#17111 = LINE('',#17112,#17113); +#17112 = CARTESIAN_POINT('',(1.41,0.32,1.85)); +#17113 = VECTOR('',#17114,1.); +#17114 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#17115 = ORIENTED_EDGE('',*,*,#17116,.T.); +#17116 = EDGE_CURVE('',#17109,#17117,#17119,.T.); +#17117 = VERTEX_POINT('',#17118); +#17118 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#17119 = LINE('',#17120,#17121); +#17120 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#17121 = VECTOR('',#17122,1.); +#17122 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17123 = ORIENTED_EDGE('',*,*,#17124,.T.); +#17124 = EDGE_CURVE('',#17117,#17101,#17125,.T.); +#17125 = LINE('',#17126,#17127); +#17126 = CARTESIAN_POINT('',(1.41,-0.32,1.85)); +#17127 = VECTOR('',#17128,1.); +#17128 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#17129 = FACE_BOUND('',#17130,.T.); +#17130 = EDGE_LOOP('',(#17131,#17141,#17149,#17157)); +#17131 = ORIENTED_EDGE('',*,*,#17132,.F.); +#17132 = EDGE_CURVE('',#17133,#17135,#17137,.T.); +#17133 = VERTEX_POINT('',#17134); +#17134 = CARTESIAN_POINT('',(4.68,0.32,1.85)); +#17135 = VERTEX_POINT('',#17136); +#17136 = CARTESIAN_POINT('',(4.68,-0.32,1.85)); +#17137 = LINE('',#17138,#17139); +#17138 = CARTESIAN_POINT('',(4.68,-0.26920299558,1.85)); +#17139 = VECTOR('',#17140,1.); +#17140 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17141 = ORIENTED_EDGE('',*,*,#17142,.T.); +#17142 = EDGE_CURVE('',#17133,#17143,#17145,.T.); +#17143 = VERTEX_POINT('',#17144); +#17144 = CARTESIAN_POINT('',(5.32,0.32,1.85)); +#17145 = LINE('',#17146,#17147); +#17146 = CARTESIAN_POINT('',(3.91,0.32,1.85)); +#17147 = VECTOR('',#17148,1.); +#17148 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#17149 = ORIENTED_EDGE('',*,*,#17150,.T.); +#17150 = EDGE_CURVE('',#17143,#17151,#17153,.T.); +#17151 = VERTEX_POINT('',#17152); +#17152 = CARTESIAN_POINT('',(5.32,-0.32,1.85)); +#17153 = LINE('',#17154,#17155); +#17154 = CARTESIAN_POINT('',(5.32,-0.26920299558,1.85)); +#17155 = VECTOR('',#17156,1.); +#17156 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17157 = ORIENTED_EDGE('',*,*,#17158,.T.); +#17158 = EDGE_CURVE('',#17151,#17135,#17159,.T.); +#17159 = LINE('',#17160,#17161); +#17160 = CARTESIAN_POINT('',(3.91,-0.32,1.85)); +#17161 = VECTOR('',#17162,1.); +#17162 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#17163 = FACE_BOUND('',#17164,.T.); +#17164 = EDGE_LOOP('',(#17165,#17175,#17183,#17191)); +#17165 = ORIENTED_EDGE('',*,*,#17166,.F.); +#17166 = EDGE_CURVE('',#17167,#17169,#17171,.T.); +#17167 = VERTEX_POINT('',#17168); +#17168 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#17169 = VERTEX_POINT('',#17170); +#17170 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#17171 = LINE('',#17172,#17173); +#17172 = CARTESIAN_POINT('',(2.18,-0.2875,1.85)); +#17173 = VECTOR('',#17174,1.); +#17174 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17175 = ORIENTED_EDGE('',*,*,#17176,.T.); +#17176 = EDGE_CURVE('',#17167,#17177,#17179,.T.); +#17177 = VERTEX_POINT('',#17178); +#17178 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#17179 = LINE('',#17180,#17181); +#17180 = CARTESIAN_POINT('',(2.66,0.32,1.85)); +#17181 = VECTOR('',#17182,1.); +#17182 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#17183 = ORIENTED_EDGE('',*,*,#17184,.T.); +#17184 = EDGE_CURVE('',#17177,#17185,#17187,.T.); +#17185 = VERTEX_POINT('',#17186); +#17186 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#17187 = LINE('',#17188,#17189); +#17188 = CARTESIAN_POINT('',(2.82,-0.2875,1.85)); +#17189 = VECTOR('',#17190,1.); +#17190 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17191 = ORIENTED_EDGE('',*,*,#17192,.T.); +#17192 = EDGE_CURVE('',#17185,#17169,#17193,.T.); +#17193 = LINE('',#17194,#17195); +#17194 = CARTESIAN_POINT('',(2.66,-0.32,1.85)); +#17195 = VECTOR('',#17196,1.); +#17196 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#17197 = PLANE('',#17198); +#17198 = AXIS2_PLACEMENT_3D('',#17199,#17200,#17201); +#17199 = CARTESIAN_POINT('',(2.5,-0.575,1.85)); +#17200 = DIRECTION('',(7.789680114753E-33,-9.539606818914E-49,1.)); +#17201 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#17202 = ADVANCED_FACE('',(#17203),#17214,.F.); +#17203 = FACE_BOUND('',#17204,.F.); +#17204 = EDGE_LOOP('',(#17205,#17206,#17212,#17213)); +#17205 = ORIENTED_EDGE('',*,*,#16576,.F.); +#17206 = ORIENTED_EDGE('',*,*,#17207,.T.); +#17207 = EDGE_CURVE('',#16569,#16367,#17208,.T.); +#17208 = LINE('',#17209,#17210); +#17209 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#17210 = VECTOR('',#17211,1.); +#17211 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17212 = ORIENTED_EDGE('',*,*,#16374,.F.); +#17213 = ORIENTED_EDGE('',*,*,#16422,.F.); +#17214 = PLANE('',#17215); +#17215 = AXIS2_PLACEMENT_3D('',#17216,#17217,#17218); +#17216 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#17217 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17218 = DIRECTION('',(0.,0.,1.)); +#17219 = ADVANCED_FACE('',(#17220),#17231,.F.); +#17220 = FACE_BOUND('',#17221,.F.); +#17221 = EDGE_LOOP('',(#17222,#17223,#17229,#17230)); +#17222 = ORIENTED_EDGE('',*,*,#16568,.F.); +#17223 = ORIENTED_EDGE('',*,*,#17224,.T.); +#17224 = EDGE_CURVE('',#16561,#16359,#17225,.T.); +#17225 = LINE('',#17226,#17227); +#17226 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#17227 = VECTOR('',#17228,1.); +#17228 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17229 = ORIENTED_EDGE('',*,*,#16366,.F.); +#17230 = ORIENTED_EDGE('',*,*,#17207,.F.); +#17231 = PLANE('',#17232); +#17232 = AXIS2_PLACEMENT_3D('',#17233,#17234,#17235); +#17233 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#17234 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#17235 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#17236 = ADVANCED_FACE('',(#17237),#17248,.F.); +#17237 = FACE_BOUND('',#17238,.F.); +#17238 = EDGE_LOOP('',(#17239,#17240,#17246,#17247)); +#17239 = ORIENTED_EDGE('',*,*,#16560,.F.); +#17240 = ORIENTED_EDGE('',*,*,#17241,.T.); +#17241 = EDGE_CURVE('',#16553,#16351,#17242,.T.); +#17242 = LINE('',#17243,#17244); +#17243 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#17244 = VECTOR('',#17245,1.); +#17245 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17246 = ORIENTED_EDGE('',*,*,#16358,.F.); +#17247 = ORIENTED_EDGE('',*,*,#17224,.F.); +#17248 = PLANE('',#17249); +#17249 = AXIS2_PLACEMENT_3D('',#17250,#17251,#17252); +#17250 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#17251 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#17252 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#17253 = ADVANCED_FACE('',(#17254),#17265,.F.); +#17254 = FACE_BOUND('',#17255,.F.); +#17255 = EDGE_LOOP('',(#17256,#17257,#17263,#17264)); +#17256 = ORIENTED_EDGE('',*,*,#16552,.F.); +#17257 = ORIENTED_EDGE('',*,*,#17258,.T.); +#17258 = EDGE_CURVE('',#16544,#16342,#17259,.T.); +#17259 = LINE('',#17260,#17261); +#17260 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#17261 = VECTOR('',#17262,1.); +#17262 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17263 = ORIENTED_EDGE('',*,*,#16350,.F.); +#17264 = ORIENTED_EDGE('',*,*,#17241,.F.); +#17265 = PLANE('',#17266); +#17266 = AXIS2_PLACEMENT_3D('',#17267,#17268,#17269); +#17267 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#17268 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17269 = DIRECTION('',(0.,0.,1.)); +#17270 = ADVANCED_FACE('',(#17271),#17282,.F.); +#17271 = FACE_BOUND('',#17272,.F.); +#17272 = EDGE_LOOP('',(#17273,#17274,#17275,#17276)); +#17273 = ORIENTED_EDGE('',*,*,#16341,.F.); +#17274 = ORIENTED_EDGE('',*,*,#17258,.F.); +#17275 = ORIENTED_EDGE('',*,*,#16543,.F.); +#17276 = ORIENTED_EDGE('',*,*,#17277,.T.); +#17277 = EDGE_CURVE('',#16536,#16334,#17278,.T.); +#17278 = LINE('',#17279,#17280); +#17279 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#17280 = VECTOR('',#17281,1.); +#17281 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17282 = CYLINDRICAL_SURFACE('',#17283,0.75); +#17283 = AXIS2_PLACEMENT_3D('',#17284,#17285,#17286); +#17284 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#17285 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17286 = DIRECTION('',(-0.,0.,-1.)); +#17287 = ADVANCED_FACE('',(#17288),#17299,.F.); +#17288 = FACE_BOUND('',#17289,.F.); +#17289 = EDGE_LOOP('',(#17290,#17291,#17292,#17298)); +#17290 = ORIENTED_EDGE('',*,*,#17277,.F.); +#17291 = ORIENTED_EDGE('',*,*,#16535,.F.); +#17292 = ORIENTED_EDGE('',*,*,#17293,.T.); +#17293 = EDGE_CURVE('',#16528,#16326,#17294,.T.); +#17294 = LINE('',#17295,#17296); +#17295 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#17296 = VECTOR('',#17297,1.); +#17297 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17298 = ORIENTED_EDGE('',*,*,#16333,.F.); +#17299 = PLANE('',#17300); +#17300 = AXIS2_PLACEMENT_3D('',#17301,#17302,#17303); +#17301 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#17302 = DIRECTION('',(-0.,0.,-1.)); +#17303 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17304 = ADVANCED_FACE('',(#17305),#17316,.F.); +#17305 = FACE_BOUND('',#17306,.F.); +#17306 = EDGE_LOOP('',(#17307,#17308,#17314,#17315)); +#17307 = ORIENTED_EDGE('',*,*,#16527,.F.); +#17308 = ORIENTED_EDGE('',*,*,#17309,.T.); +#17309 = EDGE_CURVE('',#16520,#16318,#17310,.T.); +#17310 = LINE('',#17311,#17312); +#17311 = CARTESIAN_POINT('',(1.,2.35,7.)); +#17312 = VECTOR('',#17313,1.); +#17313 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17314 = ORIENTED_EDGE('',*,*,#16325,.F.); +#17315 = ORIENTED_EDGE('',*,*,#17293,.F.); +#17316 = PLANE('',#17317); +#17317 = AXIS2_PLACEMENT_3D('',#17318,#17319,#17320); +#17318 = CARTESIAN_POINT('',(1.,2.35,7.)); +#17319 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17320 = DIRECTION('',(0.,-0.,-1.)); +#17321 = ADVANCED_FACE('',(#17322),#17333,.T.); +#17322 = FACE_BOUND('',#17323,.T.); +#17323 = EDGE_LOOP('',(#17324,#17325,#17331,#17332)); +#17324 = ORIENTED_EDGE('',*,*,#16317,.F.); +#17325 = ORIENTED_EDGE('',*,*,#17326,.F.); +#17326 = EDGE_CURVE('',#16512,#16310,#17327,.T.); +#17327 = LINE('',#17328,#17329); +#17328 = CARTESIAN_POINT('',(4.,2.35,7.)); +#17329 = VECTOR('',#17330,1.); +#17330 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17331 = ORIENTED_EDGE('',*,*,#16519,.T.); +#17332 = ORIENTED_EDGE('',*,*,#17309,.T.); +#17333 = PLANE('',#17334); +#17334 = AXIS2_PLACEMENT_3D('',#17335,#17336,#17337); +#17335 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#17336 = DIRECTION('',(0.,0.,1.)); +#17337 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17338 = ADVANCED_FACE('',(#17339),#17350,.T.); +#17339 = FACE_BOUND('',#17340,.T.); +#17340 = EDGE_LOOP('',(#17341,#17342,#17343,#17344)); +#17341 = ORIENTED_EDGE('',*,*,#16511,.F.); +#17342 = ORIENTED_EDGE('',*,*,#17326,.T.); +#17343 = ORIENTED_EDGE('',*,*,#16309,.F.); +#17344 = ORIENTED_EDGE('',*,*,#17345,.F.); +#17345 = EDGE_CURVE('',#16504,#16302,#17346,.T.); +#17346 = LINE('',#17347,#17348); +#17347 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#17348 = VECTOR('',#17349,1.); +#17349 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17350 = PLANE('',#17351); +#17351 = AXIS2_PLACEMENT_3D('',#17352,#17353,#17354); +#17352 = CARTESIAN_POINT('',(4.,2.35,7.)); +#17353 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17354 = DIRECTION('',(0.,-0.,-1.)); +#17355 = ADVANCED_FACE('',(#17356),#17367,.T.); +#17356 = FACE_BOUND('',#17357,.T.); +#17357 = EDGE_LOOP('',(#17358,#17364,#17365,#17366)); +#17358 = ORIENTED_EDGE('',*,*,#17359,.F.); +#17359 = EDGE_CURVE('',#16495,#16293,#17360,.T.); +#17360 = LINE('',#17361,#17362); +#17361 = CARTESIAN_POINT('',(4.75,2.35,3.1)); +#17362 = VECTOR('',#17363,1.); +#17363 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17364 = ORIENTED_EDGE('',*,*,#16503,.F.); +#17365 = ORIENTED_EDGE('',*,*,#17345,.T.); +#17366 = ORIENTED_EDGE('',*,*,#16301,.F.); +#17367 = PLANE('',#17368); +#17368 = AXIS2_PLACEMENT_3D('',#17369,#17370,#17371); +#17369 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#17370 = DIRECTION('',(0.,0.,1.)); +#17371 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17372 = ADVANCED_FACE('',(#17373),#17384,.F.); +#17373 = FACE_BOUND('',#17374,.F.); +#17374 = EDGE_LOOP('',(#17375,#17376,#17377,#17383)); +#17375 = ORIENTED_EDGE('',*,*,#17359,.F.); +#17376 = ORIENTED_EDGE('',*,*,#16494,.T.); +#17377 = ORIENTED_EDGE('',*,*,#17378,.T.); +#17378 = EDGE_CURVE('',#16487,#16285,#17379,.T.); +#17379 = LINE('',#17380,#17381); +#17380 = CARTESIAN_POINT('',(5.5,2.35,3.85)); +#17381 = VECTOR('',#17382,1.); +#17382 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17383 = ORIENTED_EDGE('',*,*,#16292,.F.); +#17384 = CYLINDRICAL_SURFACE('',#17385,0.75); +#17385 = AXIS2_PLACEMENT_3D('',#17386,#17387,#17388); +#17386 = CARTESIAN_POINT('',(4.75,2.35,3.85)); +#17387 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17388 = DIRECTION('',(0.,-0.,-1.)); +#17389 = ADVANCED_FACE('',(#17390),#17401,.T.); +#17390 = FACE_BOUND('',#17391,.T.); +#17391 = EDGE_LOOP('',(#17392,#17393,#17394,#17395)); +#17392 = ORIENTED_EDGE('',*,*,#16486,.F.); +#17393 = ORIENTED_EDGE('',*,*,#17378,.T.); +#17394 = ORIENTED_EDGE('',*,*,#16284,.F.); +#17395 = ORIENTED_EDGE('',*,*,#17396,.F.); +#17396 = EDGE_CURVE('',#16479,#16277,#17397,.T.); +#17397 = LINE('',#17398,#17399); +#17398 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#17399 = VECTOR('',#17400,1.); +#17400 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17401 = PLANE('',#17402); +#17402 = AXIS2_PLACEMENT_3D('',#17403,#17404,#17405); +#17403 = CARTESIAN_POINT('',(5.5,2.35,3.1)); +#17404 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17405 = DIRECTION('',(0.,0.,1.)); +#17406 = ADVANCED_FACE('',(#17407),#17418,.T.); +#17407 = FACE_BOUND('',#17408,.T.); +#17408 = EDGE_LOOP('',(#17409,#17410,#17411,#17412)); +#17409 = ORIENTED_EDGE('',*,*,#16478,.F.); +#17410 = ORIENTED_EDGE('',*,*,#17396,.T.); +#17411 = ORIENTED_EDGE('',*,*,#16276,.F.); +#17412 = ORIENTED_EDGE('',*,*,#17413,.F.); +#17413 = EDGE_CURVE('',#16471,#16269,#17414,.T.); +#17414 = LINE('',#17415,#17416); +#17415 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#17416 = VECTOR('',#17417,1.); +#17417 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17418 = PLANE('',#17419); +#17419 = AXIS2_PLACEMENT_3D('',#17420,#17421,#17422); +#17420 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#17421 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#17422 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#17423 = ADVANCED_FACE('',(#17424),#17435,.T.); +#17424 = FACE_BOUND('',#17425,.T.); +#17425 = EDGE_LOOP('',(#17426,#17427,#17428,#17429)); +#17426 = ORIENTED_EDGE('',*,*,#16470,.F.); +#17427 = ORIENTED_EDGE('',*,*,#17413,.T.); +#17428 = ORIENTED_EDGE('',*,*,#16268,.F.); +#17429 = ORIENTED_EDGE('',*,*,#17430,.F.); +#17430 = EDGE_CURVE('',#16463,#16261,#17431,.T.); +#17431 = LINE('',#17432,#17433); +#17432 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#17433 = VECTOR('',#17434,1.); +#17434 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17435 = PLANE('',#17436); +#17436 = AXIS2_PLACEMENT_3D('',#17437,#17438,#17439); +#17437 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#17438 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#17439 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#17440 = ADVANCED_FACE('',(#17441),#17447,.T.); +#17441 = FACE_BOUND('',#17442,.T.); +#17442 = EDGE_LOOP('',(#17443,#17444,#17445,#17446)); +#17443 = ORIENTED_EDGE('',*,*,#16462,.F.); +#17444 = ORIENTED_EDGE('',*,*,#17430,.T.); +#17445 = ORIENTED_EDGE('',*,*,#16260,.F.); +#17446 = ORIENTED_EDGE('',*,*,#17049,.F.); +#17447 = PLANE('',#17448); +#17448 = AXIS2_PLACEMENT_3D('',#17449,#17450,#17451); +#17449 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#17450 = DIRECTION('',(-1.,1.224646799147E-16,4.93432455389E-16)); +#17451 = DIRECTION('',(4.93432455389E-16,-6.042804770875E-32,1.)); +#17452 = ADVANCED_FACE('',(#17453),#17464,.F.); +#17453 = FACE_BOUND('',#17454,.F.); +#17454 = EDGE_LOOP('',(#17455,#17456,#17457,#17463)); +#17455 = ORIENTED_EDGE('',*,*,#16657,.T.); +#17456 = ORIENTED_EDGE('',*,*,#16914,.T.); +#17457 = ORIENTED_EDGE('',*,*,#17458,.F.); +#17458 = EDGE_CURVE('',#16972,#16915,#17459,.T.); +#17459 = LINE('',#17460,#17461); +#17460 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#17461 = VECTOR('',#17462,1.); +#17462 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17463 = ORIENTED_EDGE('',*,*,#16971,.F.); +#17464 = PLANE('',#17465); +#17465 = AXIS2_PLACEMENT_3D('',#17466,#17467,#17468); +#17466 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#17467 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#17468 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#17469 = ADVANCED_FACE('',(#17470),#17481,.F.); +#17470 = FACE_BOUND('',#17471,.F.); +#17471 = EDGE_LOOP('',(#17472,#17473,#17474,#17480)); +#17472 = ORIENTED_EDGE('',*,*,#16625,.T.); +#17473 = ORIENTED_EDGE('',*,*,#16809,.T.); +#17474 = ORIENTED_EDGE('',*,*,#17475,.F.); +#17475 = EDGE_CURVE('',#16867,#16810,#17476,.T.); +#17476 = LINE('',#17477,#17478); +#17477 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#17478 = VECTOR('',#17479,1.); +#17479 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17480 = ORIENTED_EDGE('',*,*,#16866,.F.); +#17481 = PLANE('',#17482); +#17482 = AXIS2_PLACEMENT_3D('',#17483,#17484,#17485); +#17483 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#17484 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#17485 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#17486 = ADVANCED_FACE('',(#17487),#17498,.F.); +#17487 = FACE_BOUND('',#17488,.F.); +#17488 = EDGE_LOOP('',(#17489,#17490,#17491,#17497)); +#17489 = ORIENTED_EDGE('',*,*,#16593,.T.); +#17490 = ORIENTED_EDGE('',*,*,#16704,.T.); +#17491 = ORIENTED_EDGE('',*,*,#17492,.F.); +#17492 = EDGE_CURVE('',#16762,#16705,#17493,.T.); +#17493 = LINE('',#17494,#17495); +#17494 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#17495 = VECTOR('',#17496,1.); +#17496 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17497 = ORIENTED_EDGE('',*,*,#16761,.F.); +#17498 = PLANE('',#17499); +#17499 = AXIS2_PLACEMENT_3D('',#17500,#17501,#17502); +#17500 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#17501 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#17502 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#17503 = ADVANCED_FACE('',(#17504,#17510),#17544,.F.); +#17504 = FACE_BOUND('',#17505,.F.); +#17505 = EDGE_LOOP('',(#17506,#17507,#17508,#17509)); +#17506 = ORIENTED_EDGE('',*,*,#17492,.T.); +#17507 = ORIENTED_EDGE('',*,*,#16712,.T.); +#17508 = ORIENTED_EDGE('',*,*,#16736,.F.); +#17509 = ORIENTED_EDGE('',*,*,#16769,.F.); +#17510 = FACE_BOUND('',#17511,.F.); +#17511 = EDGE_LOOP('',(#17512,#17522,#17530,#17538)); +#17512 = ORIENTED_EDGE('',*,*,#17513,.F.); +#17513 = EDGE_CURVE('',#17514,#17516,#17518,.T.); +#17514 = VERTEX_POINT('',#17515); +#17515 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#17516 = VERTEX_POINT('',#17517); +#17517 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#17518 = LINE('',#17519,#17520); +#17519 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#17520 = VECTOR('',#17521,1.); +#17521 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17522 = ORIENTED_EDGE('',*,*,#17523,.T.); +#17523 = EDGE_CURVE('',#17514,#17524,#17526,.T.); +#17524 = VERTEX_POINT('',#17525); +#17525 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#17526 = LINE('',#17527,#17528); +#17527 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#17528 = VECTOR('',#17529,1.); +#17529 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17530 = ORIENTED_EDGE('',*,*,#17531,.T.); +#17531 = EDGE_CURVE('',#17524,#17532,#17534,.T.); +#17532 = VERTEX_POINT('',#17533); +#17533 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#17534 = LINE('',#17535,#17536); +#17535 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#17536 = VECTOR('',#17537,1.); +#17537 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17538 = ORIENTED_EDGE('',*,*,#17539,.T.); +#17539 = EDGE_CURVE('',#17532,#17516,#17540,.T.); +#17540 = LINE('',#17541,#17542); +#17541 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#17542 = VECTOR('',#17543,1.); +#17543 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17544 = PLANE('',#17545); +#17545 = AXIS2_PLACEMENT_3D('',#17546,#17547,#17548); +#17546 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#17547 = DIRECTION('',(0.,0.,1.)); +#17548 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17549 = ADVANCED_FACE('',(#17550,#17556),#17590,.F.); +#17550 = FACE_BOUND('',#17551,.F.); +#17551 = EDGE_LOOP('',(#17552,#17553,#17554,#17555)); +#17552 = ORIENTED_EDGE('',*,*,#17475,.T.); +#17553 = ORIENTED_EDGE('',*,*,#16817,.T.); +#17554 = ORIENTED_EDGE('',*,*,#16841,.F.); +#17555 = ORIENTED_EDGE('',*,*,#16874,.F.); +#17556 = FACE_BOUND('',#17557,.F.); +#17557 = EDGE_LOOP('',(#17558,#17568,#17576,#17584)); +#17558 = ORIENTED_EDGE('',*,*,#17559,.F.); +#17559 = EDGE_CURVE('',#17560,#17562,#17564,.T.); +#17560 = VERTEX_POINT('',#17561); +#17561 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#17562 = VERTEX_POINT('',#17563); +#17563 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#17564 = LINE('',#17565,#17566); +#17565 = CARTESIAN_POINT('',(2.18,0.25,0.3)); +#17566 = VECTOR('',#17567,1.); +#17567 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17568 = ORIENTED_EDGE('',*,*,#17569,.T.); +#17569 = EDGE_CURVE('',#17560,#17570,#17572,.T.); +#17570 = VERTEX_POINT('',#17571); +#17571 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#17572 = LINE('',#17573,#17574); +#17573 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#17574 = VECTOR('',#17575,1.); +#17575 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17576 = ORIENTED_EDGE('',*,*,#17577,.T.); +#17577 = EDGE_CURVE('',#17570,#17578,#17580,.T.); +#17578 = VERTEX_POINT('',#17579); +#17579 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#17580 = LINE('',#17581,#17582); +#17581 = CARTESIAN_POINT('',(2.82,0.25,0.3)); +#17582 = VECTOR('',#17583,1.); +#17583 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17584 = ORIENTED_EDGE('',*,*,#17585,.T.); +#17585 = EDGE_CURVE('',#17578,#17562,#17586,.T.); +#17586 = LINE('',#17587,#17588); +#17587 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#17588 = VECTOR('',#17589,1.); +#17589 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17590 = PLANE('',#17591); +#17591 = AXIS2_PLACEMENT_3D('',#17592,#17593,#17594); +#17592 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#17593 = DIRECTION('',(0.,0.,1.)); +#17594 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17595 = ADVANCED_FACE('',(#17596,#17602),#17636,.F.); +#17596 = FACE_BOUND('',#17597,.F.); +#17597 = EDGE_LOOP('',(#17598,#17599,#17600,#17601)); +#17598 = ORIENTED_EDGE('',*,*,#17458,.T.); +#17599 = ORIENTED_EDGE('',*,*,#16922,.T.); +#17600 = ORIENTED_EDGE('',*,*,#16946,.F.); +#17601 = ORIENTED_EDGE('',*,*,#16979,.F.); +#17602 = FACE_BOUND('',#17603,.F.); +#17603 = EDGE_LOOP('',(#17604,#17614,#17622,#17630)); +#17604 = ORIENTED_EDGE('',*,*,#17605,.F.); +#17605 = EDGE_CURVE('',#17606,#17608,#17610,.T.); +#17606 = VERTEX_POINT('',#17607); +#17607 = CARTESIAN_POINT('',(4.68,0.32,0.3)); +#17608 = VERTEX_POINT('',#17609); +#17609 = CARTESIAN_POINT('',(4.68,-0.32,0.3)); +#17610 = LINE('',#17611,#17612); +#17611 = CARTESIAN_POINT('',(4.68,0.26829700442,0.3)); +#17612 = VECTOR('',#17613,1.); +#17613 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17614 = ORIENTED_EDGE('',*,*,#17615,.T.); +#17615 = EDGE_CURVE('',#17606,#17616,#17618,.T.); +#17616 = VERTEX_POINT('',#17617); +#17617 = CARTESIAN_POINT('',(5.32,0.32,0.3)); +#17618 = LINE('',#17619,#17620); +#17619 = CARTESIAN_POINT('',(5.535,0.32,0.3)); +#17620 = VECTOR('',#17621,1.); +#17621 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17622 = ORIENTED_EDGE('',*,*,#17623,.T.); +#17623 = EDGE_CURVE('',#17616,#17624,#17626,.T.); +#17624 = VERTEX_POINT('',#17625); +#17625 = CARTESIAN_POINT('',(5.32,-0.32,0.3)); +#17626 = LINE('',#17627,#17628); +#17627 = CARTESIAN_POINT('',(5.32,0.26829700442,0.3)); +#17628 = VECTOR('',#17629,1.); +#17629 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17630 = ORIENTED_EDGE('',*,*,#17631,.T.); +#17631 = EDGE_CURVE('',#17624,#17608,#17632,.T.); +#17632 = LINE('',#17633,#17634); +#17633 = CARTESIAN_POINT('',(5.535,-0.32,0.3)); +#17634 = VECTOR('',#17635,1.); +#17635 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17636 = PLANE('',#17637); +#17637 = AXIS2_PLACEMENT_3D('',#17638,#17639,#17640); +#17638 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#17639 = DIRECTION('',(0.,0.,1.)); +#17640 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17641 = ADVANCED_FACE('',(#17642),#17667,.T.); +#17642 = FACE_BOUND('',#17643,.T.); +#17643 = EDGE_LOOP('',(#17644,#17645,#17653,#17661)); +#17644 = ORIENTED_EDGE('',*,*,#17098,.T.); +#17645 = ORIENTED_EDGE('',*,*,#17646,.T.); +#17646 = EDGE_CURVE('',#17101,#17647,#17649,.T.); +#17647 = VERTEX_POINT('',#17648); +#17648 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#17649 = LINE('',#17650,#17651); +#17650 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#17651 = VECTOR('',#17652,1.); +#17652 = DIRECTION('',(0.,0.,1.)); +#17653 = ORIENTED_EDGE('',*,*,#17654,.T.); +#17654 = EDGE_CURVE('',#17647,#17655,#17657,.T.); +#17655 = VERTEX_POINT('',#17656); +#17656 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#17657 = LINE('',#17658,#17659); +#17658 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#17659 = VECTOR('',#17660,1.); +#17660 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17661 = ORIENTED_EDGE('',*,*,#17662,.T.); +#17662 = EDGE_CURVE('',#17655,#17099,#17663,.T.); +#17663 = LINE('',#17664,#17665); +#17664 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#17665 = VECTOR('',#17666,1.); +#17666 = DIRECTION('',(-0.,0.,-1.)); +#17667 = PLANE('',#17668); +#17668 = AXIS2_PLACEMENT_3D('',#17669,#17670,#17671); +#17669 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#17670 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17671 = DIRECTION('',(0.,0.,1.)); +#17672 = ADVANCED_FACE('',(#17673),#17691,.F.); +#17673 = FACE_BOUND('',#17674,.F.); +#17674 = EDGE_LOOP('',(#17675,#17683,#17684,#17685)); +#17675 = ORIENTED_EDGE('',*,*,#17676,.F.); +#17676 = EDGE_CURVE('',#17117,#17677,#17679,.T.); +#17677 = VERTEX_POINT('',#17678); +#17678 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#17679 = LINE('',#17680,#17681); +#17680 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#17681 = VECTOR('',#17682,1.); +#17682 = DIRECTION('',(0.,0.,1.)); +#17683 = ORIENTED_EDGE('',*,*,#17124,.T.); +#17684 = ORIENTED_EDGE('',*,*,#17646,.T.); +#17685 = ORIENTED_EDGE('',*,*,#17686,.F.); +#17686 = EDGE_CURVE('',#17677,#17647,#17687,.T.); +#17687 = LINE('',#17688,#17689); +#17688 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#17689 = VECTOR('',#17690,1.); +#17690 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17691 = PLANE('',#17692); +#17692 = AXIS2_PLACEMENT_3D('',#17693,#17694,#17695); +#17693 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#17694 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17695 = DIRECTION('',(0.,-0.,1.)); +#17696 = ADVANCED_FACE('',(#17697),#17715,.F.); +#17697 = FACE_BOUND('',#17698,.F.); +#17698 = EDGE_LOOP('',(#17699,#17700,#17701,#17709)); +#17699 = ORIENTED_EDGE('',*,*,#17116,.T.); +#17700 = ORIENTED_EDGE('',*,*,#17676,.T.); +#17701 = ORIENTED_EDGE('',*,*,#17702,.T.); +#17702 = EDGE_CURVE('',#17677,#17703,#17705,.T.); +#17703 = VERTEX_POINT('',#17704); +#17704 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#17705 = LINE('',#17706,#17707); +#17706 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#17707 = VECTOR('',#17708,1.); +#17708 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17709 = ORIENTED_EDGE('',*,*,#17710,.T.); +#17710 = EDGE_CURVE('',#17703,#17109,#17711,.T.); +#17711 = LINE('',#17712,#17713); +#17712 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#17713 = VECTOR('',#17714,1.); +#17714 = DIRECTION('',(-0.,0.,-1.)); +#17715 = PLANE('',#17716); +#17716 = AXIS2_PLACEMENT_3D('',#17717,#17718,#17719); +#17717 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#17718 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17719 = DIRECTION('',(0.,0.,1.)); +#17720 = ADVANCED_FACE('',(#17721),#17732,.F.); +#17721 = FACE_BOUND('',#17722,.F.); +#17722 = EDGE_LOOP('',(#17723,#17724,#17730,#17731)); +#17723 = ORIENTED_EDGE('',*,*,#17710,.F.); +#17724 = ORIENTED_EDGE('',*,*,#17725,.T.); +#17725 = EDGE_CURVE('',#17703,#17655,#17726,.T.); +#17726 = LINE('',#17727,#17728); +#17727 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#17728 = VECTOR('',#17729,1.); +#17729 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17730 = ORIENTED_EDGE('',*,*,#17662,.T.); +#17731 = ORIENTED_EDGE('',*,*,#17108,.T.); +#17732 = PLANE('',#17733); +#17733 = AXIS2_PLACEMENT_3D('',#17734,#17735,#17736); +#17734 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#17735 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17736 = DIRECTION('',(-0.,0.,-1.)); +#17737 = ADVANCED_FACE('',(#17738),#17763,.T.); +#17738 = FACE_BOUND('',#17739,.T.); +#17739 = EDGE_LOOP('',(#17740,#17741,#17749,#17757)); +#17740 = ORIENTED_EDGE('',*,*,#17132,.T.); +#17741 = ORIENTED_EDGE('',*,*,#17742,.T.); +#17742 = EDGE_CURVE('',#17135,#17743,#17745,.T.); +#17743 = VERTEX_POINT('',#17744); +#17744 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#17745 = LINE('',#17746,#17747); +#17746 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#17747 = VECTOR('',#17748,1.); +#17748 = DIRECTION('',(0.,0.,1.)); +#17749 = ORIENTED_EDGE('',*,*,#17750,.T.); +#17750 = EDGE_CURVE('',#17743,#17751,#17753,.T.); +#17751 = VERTEX_POINT('',#17752); +#17752 = CARTESIAN_POINT('',(4.68,0.32,6.3)); +#17753 = LINE('',#17754,#17755); +#17754 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#17755 = VECTOR('',#17756,1.); +#17756 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17757 = ORIENTED_EDGE('',*,*,#17758,.T.); +#17758 = EDGE_CURVE('',#17751,#17133,#17759,.T.); +#17759 = LINE('',#17760,#17761); +#17760 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#17761 = VECTOR('',#17762,1.); +#17762 = DIRECTION('',(-0.,0.,-1.)); +#17763 = PLANE('',#17764); +#17764 = AXIS2_PLACEMENT_3D('',#17765,#17766,#17767); +#17765 = CARTESIAN_POINT('',(4.68,3.65940088399E-02,1.522832428212)); +#17766 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17767 = DIRECTION('',(0.,0.,1.)); +#17768 = ADVANCED_FACE('',(#17769),#17787,.F.); +#17769 = FACE_BOUND('',#17770,.F.); +#17770 = EDGE_LOOP('',(#17771,#17779,#17780,#17781)); +#17771 = ORIENTED_EDGE('',*,*,#17772,.F.); +#17772 = EDGE_CURVE('',#17151,#17773,#17775,.T.); +#17773 = VERTEX_POINT('',#17774); +#17774 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#17775 = LINE('',#17776,#17777); +#17776 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#17777 = VECTOR('',#17778,1.); +#17778 = DIRECTION('',(0.,0.,1.)); +#17779 = ORIENTED_EDGE('',*,*,#17158,.T.); +#17780 = ORIENTED_EDGE('',*,*,#17742,.T.); +#17781 = ORIENTED_EDGE('',*,*,#17782,.F.); +#17782 = EDGE_CURVE('',#17773,#17743,#17783,.T.); +#17783 = LINE('',#17784,#17785); +#17784 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#17785 = VECTOR('',#17786,1.); +#17786 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17787 = PLANE('',#17788); +#17788 = AXIS2_PLACEMENT_3D('',#17789,#17790,#17791); +#17789 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#17790 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17791 = DIRECTION('',(0.,-0.,1.)); +#17792 = ADVANCED_FACE('',(#17793),#17811,.F.); +#17793 = FACE_BOUND('',#17794,.F.); +#17794 = EDGE_LOOP('',(#17795,#17796,#17797,#17805)); +#17795 = ORIENTED_EDGE('',*,*,#17150,.T.); +#17796 = ORIENTED_EDGE('',*,*,#17772,.T.); +#17797 = ORIENTED_EDGE('',*,*,#17798,.T.); +#17798 = EDGE_CURVE('',#17773,#17799,#17801,.T.); +#17799 = VERTEX_POINT('',#17800); +#17800 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#17801 = LINE('',#17802,#17803); +#17802 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#17803 = VECTOR('',#17804,1.); +#17804 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17805 = ORIENTED_EDGE('',*,*,#17806,.T.); +#17806 = EDGE_CURVE('',#17799,#17143,#17807,.T.); +#17807 = LINE('',#17808,#17809); +#17808 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#17809 = VECTOR('',#17810,1.); +#17810 = DIRECTION('',(-0.,0.,-1.)); +#17811 = PLANE('',#17812); +#17812 = AXIS2_PLACEMENT_3D('',#17813,#17814,#17815); +#17813 = CARTESIAN_POINT('',(5.32,3.65940088399E-02,1.522832428212)); +#17814 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17815 = DIRECTION('',(0.,0.,1.)); +#17816 = ADVANCED_FACE('',(#17817),#17828,.F.); +#17817 = FACE_BOUND('',#17818,.F.); +#17818 = EDGE_LOOP('',(#17819,#17820,#17826,#17827)); +#17819 = ORIENTED_EDGE('',*,*,#17806,.F.); +#17820 = ORIENTED_EDGE('',*,*,#17821,.T.); +#17821 = EDGE_CURVE('',#17799,#17751,#17822,.T.); +#17822 = LINE('',#17823,#17824); +#17823 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#17824 = VECTOR('',#17825,1.); +#17825 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17826 = ORIENTED_EDGE('',*,*,#17758,.T.); +#17827 = ORIENTED_EDGE('',*,*,#17142,.T.); +#17828 = PLANE('',#17829); +#17829 = AXIS2_PLACEMENT_3D('',#17830,#17831,#17832); +#17830 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#17831 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17832 = DIRECTION('',(-0.,0.,-1.)); +#17833 = ADVANCED_FACE('',(#17834),#17859,.T.); +#17834 = FACE_BOUND('',#17835,.T.); +#17835 = EDGE_LOOP('',(#17836,#17837,#17845,#17853)); +#17836 = ORIENTED_EDGE('',*,*,#17166,.T.); +#17837 = ORIENTED_EDGE('',*,*,#17838,.T.); +#17838 = EDGE_CURVE('',#17169,#17839,#17841,.T.); +#17839 = VERTEX_POINT('',#17840); +#17840 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#17841 = LINE('',#17842,#17843); +#17842 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#17843 = VECTOR('',#17844,1.); +#17844 = DIRECTION('',(0.,0.,1.)); +#17845 = ORIENTED_EDGE('',*,*,#17846,.T.); +#17846 = EDGE_CURVE('',#17839,#17847,#17849,.T.); +#17847 = VERTEX_POINT('',#17848); +#17848 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#17849 = LINE('',#17850,#17851); +#17850 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#17851 = VECTOR('',#17852,1.); +#17852 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17853 = ORIENTED_EDGE('',*,*,#17854,.T.); +#17854 = EDGE_CURVE('',#17847,#17167,#17855,.T.); +#17855 = LINE('',#17856,#17857); +#17856 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#17857 = VECTOR('',#17858,1.); +#17858 = DIRECTION('',(-0.,0.,-1.)); +#17859 = PLANE('',#17860); +#17860 = AXIS2_PLACEMENT_3D('',#17861,#17862,#17863); +#17861 = CARTESIAN_POINT('',(2.18,3.918869757272E-17,1.55)); +#17862 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17863 = DIRECTION('',(0.,0.,1.)); +#17864 = ADVANCED_FACE('',(#17865),#17883,.F.); +#17865 = FACE_BOUND('',#17866,.F.); +#17866 = EDGE_LOOP('',(#17867,#17875,#17876,#17877)); +#17867 = ORIENTED_EDGE('',*,*,#17868,.F.); +#17868 = EDGE_CURVE('',#17185,#17869,#17871,.T.); +#17869 = VERTEX_POINT('',#17870); +#17870 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#17871 = LINE('',#17872,#17873); +#17872 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#17873 = VECTOR('',#17874,1.); +#17874 = DIRECTION('',(0.,0.,1.)); +#17875 = ORIENTED_EDGE('',*,*,#17192,.T.); +#17876 = ORIENTED_EDGE('',*,*,#17838,.T.); +#17877 = ORIENTED_EDGE('',*,*,#17878,.F.); +#17878 = EDGE_CURVE('',#17869,#17839,#17879,.T.); +#17879 = LINE('',#17880,#17881); +#17880 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#17881 = VECTOR('',#17882,1.); +#17882 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17883 = PLANE('',#17884); +#17884 = AXIS2_PLACEMENT_3D('',#17885,#17886,#17887); +#17885 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#17886 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17887 = DIRECTION('',(0.,-0.,1.)); +#17888 = ADVANCED_FACE('',(#17889),#17907,.F.); +#17889 = FACE_BOUND('',#17890,.F.); +#17890 = EDGE_LOOP('',(#17891,#17892,#17893,#17901)); +#17891 = ORIENTED_EDGE('',*,*,#17184,.T.); +#17892 = ORIENTED_EDGE('',*,*,#17868,.T.); +#17893 = ORIENTED_EDGE('',*,*,#17894,.T.); +#17894 = EDGE_CURVE('',#17869,#17895,#17897,.T.); +#17895 = VERTEX_POINT('',#17896); +#17896 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#17897 = LINE('',#17898,#17899); +#17898 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#17899 = VECTOR('',#17900,1.); +#17900 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17901 = ORIENTED_EDGE('',*,*,#17902,.T.); +#17902 = EDGE_CURVE('',#17895,#17177,#17903,.T.); +#17903 = LINE('',#17904,#17905); +#17904 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#17905 = VECTOR('',#17906,1.); +#17906 = DIRECTION('',(-0.,0.,-1.)); +#17907 = PLANE('',#17908); +#17908 = AXIS2_PLACEMENT_3D('',#17909,#17910,#17911); +#17909 = CARTESIAN_POINT('',(2.82,-3.918869757272E-17,1.55)); +#17910 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17911 = DIRECTION('',(0.,0.,1.)); +#17912 = ADVANCED_FACE('',(#17913),#17924,.F.); +#17913 = FACE_BOUND('',#17914,.F.); +#17914 = EDGE_LOOP('',(#17915,#17916,#17922,#17923)); +#17915 = ORIENTED_EDGE('',*,*,#17902,.F.); +#17916 = ORIENTED_EDGE('',*,*,#17917,.T.); +#17917 = EDGE_CURVE('',#17895,#17847,#17918,.T.); +#17918 = LINE('',#17919,#17920); +#17919 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#17920 = VECTOR('',#17921,1.); +#17921 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17922 = ORIENTED_EDGE('',*,*,#17854,.T.); +#17923 = ORIENTED_EDGE('',*,*,#17176,.T.); +#17924 = PLANE('',#17925); +#17925 = AXIS2_PLACEMENT_3D('',#17926,#17927,#17928); +#17926 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#17927 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17928 = DIRECTION('',(-0.,0.,-1.)); +#17929 = ADVANCED_FACE('',(#17930),#17987,.T.); +#17930 = FACE_BOUND('',#17931,.T.); +#17931 = EDGE_LOOP('',(#17932,#17942,#17950,#17958,#17964,#17965,#17973, + #17981)); +#17932 = ORIENTED_EDGE('',*,*,#17933,.T.); +#17933 = EDGE_CURVE('',#17934,#17936,#17938,.T.); +#17934 = VERTEX_POINT('',#17935); +#17935 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#17936 = VERTEX_POINT('',#17937); +#17937 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#17938 = LINE('',#17939,#17940); +#17939 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#17940 = VECTOR('',#17941,1.); +#17941 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17942 = ORIENTED_EDGE('',*,*,#17943,.T.); +#17943 = EDGE_CURVE('',#17936,#17944,#17946,.T.); +#17944 = VERTEX_POINT('',#17945); +#17945 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#17946 = LINE('',#17947,#17948); +#17947 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#17948 = VECTOR('',#17949,1.); +#17949 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#17950 = ORIENTED_EDGE('',*,*,#17951,.T.); +#17951 = EDGE_CURVE('',#17944,#17952,#17954,.T.); +#17952 = VERTEX_POINT('',#17953); +#17953 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#17954 = LINE('',#17955,#17956); +#17955 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#17956 = VECTOR('',#17957,1.); +#17957 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#17958 = ORIENTED_EDGE('',*,*,#17959,.T.); +#17959 = EDGE_CURVE('',#17952,#17516,#17960,.T.); +#17960 = LINE('',#17961,#17962); +#17961 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#17962 = VECTOR('',#17963,1.); +#17963 = DIRECTION('',(0.,0.,1.)); +#17964 = ORIENTED_EDGE('',*,*,#17513,.F.); +#17965 = ORIENTED_EDGE('',*,*,#17966,.T.); +#17966 = EDGE_CURVE('',#17514,#17967,#17969,.T.); +#17967 = VERTEX_POINT('',#17968); +#17968 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#17969 = LINE('',#17970,#17971); +#17970 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#17971 = VECTOR('',#17972,1.); +#17972 = DIRECTION('',(-0.,0.,-1.)); +#17973 = ORIENTED_EDGE('',*,*,#17974,.T.); +#17974 = EDGE_CURVE('',#17967,#17975,#17977,.T.); +#17975 = VERTEX_POINT('',#17976); +#17976 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#17977 = LINE('',#17978,#17979); +#17978 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#17979 = VECTOR('',#17980,1.); +#17980 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#17981 = ORIENTED_EDGE('',*,*,#17982,.T.); +#17982 = EDGE_CURVE('',#17975,#17934,#17983,.T.); +#17983 = LINE('',#17984,#17985); +#17984 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#17985 = VECTOR('',#17986,1.); +#17986 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#17987 = PLANE('',#17988); +#17988 = AXIS2_PLACEMENT_3D('',#17989,#17990,#17991); +#17989 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#17990 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17991 = DIRECTION('',(0.,0.,1.)); +#17992 = ADVANCED_FACE('',(#17993),#18011,.F.); +#17993 = FACE_BOUND('',#17994,.F.); +#17994 = EDGE_LOOP('',(#17995,#18003,#18009,#18010)); +#17995 = ORIENTED_EDGE('',*,*,#17996,.F.); +#17996 = EDGE_CURVE('',#17997,#17532,#17999,.T.); +#17997 = VERTEX_POINT('',#17998); +#17998 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#17999 = LINE('',#18000,#18001); +#18000 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#18001 = VECTOR('',#18002,1.); +#18002 = DIRECTION('',(0.,0.,1.)); +#18003 = ORIENTED_EDGE('',*,*,#18004,.T.); +#18004 = EDGE_CURVE('',#17997,#17952,#18005,.T.); +#18005 = LINE('',#18006,#18007); +#18006 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#18007 = VECTOR('',#18008,1.); +#18008 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18009 = ORIENTED_EDGE('',*,*,#17959,.T.); +#18010 = ORIENTED_EDGE('',*,*,#17539,.F.); +#18011 = PLANE('',#18012); +#18012 = AXIS2_PLACEMENT_3D('',#18013,#18014,#18015); +#18013 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#18014 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18015 = DIRECTION('',(0.,-0.,1.)); +#18016 = ADVANCED_FACE('',(#18017),#18067,.F.); +#18017 = FACE_BOUND('',#18018,.F.); +#18018 = EDGE_LOOP('',(#18019,#18029,#18037,#18043,#18044,#18045,#18053, + #18061)); +#18019 = ORIENTED_EDGE('',*,*,#18020,.T.); +#18020 = EDGE_CURVE('',#18021,#18023,#18025,.T.); +#18021 = VERTEX_POINT('',#18022); +#18022 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#18023 = VERTEX_POINT('',#18024); +#18024 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#18025 = LINE('',#18026,#18027); +#18026 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#18027 = VECTOR('',#18028,1.); +#18028 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18029 = ORIENTED_EDGE('',*,*,#18030,.T.); +#18030 = EDGE_CURVE('',#18023,#18031,#18033,.T.); +#18031 = VERTEX_POINT('',#18032); +#18032 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#18033 = LINE('',#18034,#18035); +#18034 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#18035 = VECTOR('',#18036,1.); +#18036 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#18037 = ORIENTED_EDGE('',*,*,#18038,.T.); +#18038 = EDGE_CURVE('',#18031,#17997,#18039,.T.); +#18039 = LINE('',#18040,#18041); +#18040 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#18041 = VECTOR('',#18042,1.); +#18042 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#18043 = ORIENTED_EDGE('',*,*,#17996,.T.); +#18044 = ORIENTED_EDGE('',*,*,#17531,.F.); +#18045 = ORIENTED_EDGE('',*,*,#18046,.T.); +#18046 = EDGE_CURVE('',#17524,#18047,#18049,.T.); +#18047 = VERTEX_POINT('',#18048); +#18048 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#18049 = LINE('',#18050,#18051); +#18050 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#18051 = VECTOR('',#18052,1.); +#18052 = DIRECTION('',(-0.,0.,-1.)); +#18053 = ORIENTED_EDGE('',*,*,#18054,.T.); +#18054 = EDGE_CURVE('',#18047,#18055,#18057,.T.); +#18055 = VERTEX_POINT('',#18056); +#18056 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#18057 = LINE('',#18058,#18059); +#18058 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#18059 = VECTOR('',#18060,1.); +#18060 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#18061 = ORIENTED_EDGE('',*,*,#18062,.T.); +#18062 = EDGE_CURVE('',#18055,#18021,#18063,.T.); +#18063 = LINE('',#18064,#18065); +#18064 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#18065 = VECTOR('',#18066,1.); +#18066 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#18067 = PLANE('',#18068); +#18068 = AXIS2_PLACEMENT_3D('',#18069,#18070,#18071); +#18069 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#18070 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18071 = DIRECTION('',(0.,0.,1.)); +#18072 = ADVANCED_FACE('',(#18073),#18084,.F.); +#18073 = FACE_BOUND('',#18074,.F.); +#18074 = EDGE_LOOP('',(#18075,#18076,#18077,#18078)); +#18075 = ORIENTED_EDGE('',*,*,#18046,.F.); +#18076 = ORIENTED_EDGE('',*,*,#17523,.F.); +#18077 = ORIENTED_EDGE('',*,*,#17966,.T.); +#18078 = ORIENTED_EDGE('',*,*,#18079,.F.); +#18079 = EDGE_CURVE('',#18047,#17967,#18080,.T.); +#18080 = LINE('',#18081,#18082); +#18081 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#18082 = VECTOR('',#18083,1.); +#18083 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18084 = PLANE('',#18085); +#18085 = AXIS2_PLACEMENT_3D('',#18086,#18087,#18088); +#18086 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#18087 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18088 = DIRECTION('',(-0.,0.,-1.)); +#18089 = ADVANCED_FACE('',(#18090),#18115,.T.); +#18090 = FACE_BOUND('',#18091,.T.); +#18091 = EDGE_LOOP('',(#18092,#18102,#18108,#18109)); +#18092 = ORIENTED_EDGE('',*,*,#18093,.T.); +#18093 = EDGE_CURVE('',#18094,#18096,#18098,.T.); +#18094 = VERTEX_POINT('',#18095); +#18095 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#18096 = VERTEX_POINT('',#18097); +#18097 = CARTESIAN_POINT('',(2.18,-0.32,-3.2)); +#18098 = LINE('',#18099,#18100); +#18099 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#18100 = VECTOR('',#18101,1.); +#18101 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18102 = ORIENTED_EDGE('',*,*,#18103,.T.); +#18103 = EDGE_CURVE('',#18096,#17562,#18104,.T.); +#18104 = LINE('',#18105,#18106); +#18105 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#18106 = VECTOR('',#18107,1.); +#18107 = DIRECTION('',(0.,0.,1.)); +#18108 = ORIENTED_EDGE('',*,*,#17559,.F.); +#18109 = ORIENTED_EDGE('',*,*,#18110,.T.); +#18110 = EDGE_CURVE('',#17560,#18094,#18111,.T.); +#18111 = LINE('',#18112,#18113); +#18112 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#18113 = VECTOR('',#18114,1.); +#18114 = DIRECTION('',(-0.,0.,-1.)); +#18115 = PLANE('',#18116); +#18116 = AXIS2_PLACEMENT_3D('',#18117,#18118,#18119); +#18117 = CARTESIAN_POINT('',(2.18,3.918869757272E-17,1.55)); +#18118 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18119 = DIRECTION('',(0.,0.,1.)); +#18120 = ADVANCED_FACE('',(#18121),#18139,.F.); +#18121 = FACE_BOUND('',#18122,.F.); +#18122 = EDGE_LOOP('',(#18123,#18131,#18137,#18138)); +#18123 = ORIENTED_EDGE('',*,*,#18124,.F.); +#18124 = EDGE_CURVE('',#18125,#17578,#18127,.T.); +#18125 = VERTEX_POINT('',#18126); +#18126 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#18127 = LINE('',#18128,#18129); +#18128 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#18129 = VECTOR('',#18130,1.); +#18130 = DIRECTION('',(0.,0.,1.)); +#18131 = ORIENTED_EDGE('',*,*,#18132,.T.); +#18132 = EDGE_CURVE('',#18125,#18096,#18133,.T.); +#18133 = LINE('',#18134,#18135); +#18134 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#18135 = VECTOR('',#18136,1.); +#18136 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18137 = ORIENTED_EDGE('',*,*,#18103,.T.); +#18138 = ORIENTED_EDGE('',*,*,#17585,.F.); +#18139 = PLANE('',#18140); +#18140 = AXIS2_PLACEMENT_3D('',#18141,#18142,#18143); +#18141 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#18142 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18143 = DIRECTION('',(0.,-0.,1.)); +#18144 = ADVANCED_FACE('',(#18145),#18163,.F.); +#18145 = FACE_BOUND('',#18146,.F.); +#18146 = EDGE_LOOP('',(#18147,#18155,#18156,#18157)); +#18147 = ORIENTED_EDGE('',*,*,#18148,.T.); +#18148 = EDGE_CURVE('',#18149,#18125,#18151,.T.); +#18149 = VERTEX_POINT('',#18150); +#18150 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#18151 = LINE('',#18152,#18153); +#18152 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#18153 = VECTOR('',#18154,1.); +#18154 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18155 = ORIENTED_EDGE('',*,*,#18124,.T.); +#18156 = ORIENTED_EDGE('',*,*,#17577,.F.); +#18157 = ORIENTED_EDGE('',*,*,#18158,.T.); +#18158 = EDGE_CURVE('',#17570,#18149,#18159,.T.); +#18159 = LINE('',#18160,#18161); +#18160 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#18161 = VECTOR('',#18162,1.); +#18162 = DIRECTION('',(-0.,0.,-1.)); +#18163 = PLANE('',#18164); +#18164 = AXIS2_PLACEMENT_3D('',#18165,#18166,#18167); +#18165 = CARTESIAN_POINT('',(2.82,-3.918869757272E-17,1.55)); +#18166 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18167 = DIRECTION('',(0.,0.,1.)); +#18168 = ADVANCED_FACE('',(#18169),#18180,.F.); +#18169 = FACE_BOUND('',#18170,.F.); +#18170 = EDGE_LOOP('',(#18171,#18172,#18173,#18174)); +#18171 = ORIENTED_EDGE('',*,*,#18158,.F.); +#18172 = ORIENTED_EDGE('',*,*,#17569,.F.); +#18173 = ORIENTED_EDGE('',*,*,#18110,.T.); +#18174 = ORIENTED_EDGE('',*,*,#18175,.F.); +#18175 = EDGE_CURVE('',#18149,#18094,#18176,.T.); +#18176 = LINE('',#18177,#18178); +#18177 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#18178 = VECTOR('',#18179,1.); +#18179 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18180 = PLANE('',#18181); +#18181 = AXIS2_PLACEMENT_3D('',#18182,#18183,#18184); +#18182 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#18183 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18184 = DIRECTION('',(-0.,0.,-1.)); +#18185 = ADVANCED_FACE('',(#18186),#18243,.T.); +#18186 = FACE_BOUND('',#18187,.T.); +#18187 = EDGE_LOOP('',(#18188,#18198,#18206,#18214,#18220,#18221,#18229, + #18237)); +#18188 = ORIENTED_EDGE('',*,*,#18189,.T.); +#18189 = EDGE_CURVE('',#18190,#18192,#18194,.T.); +#18190 = VERTEX_POINT('',#18191); +#18191 = CARTESIAN_POINT('',(4.68,0.351578947368,-3.2)); +#18192 = VERTEX_POINT('',#18193); +#18193 = CARTESIAN_POINT('',(4.68,-0.288421052632,-3.2)); +#18194 = LINE('',#18195,#18196); +#18195 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#18196 = VECTOR('',#18197,1.); +#18197 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18198 = ORIENTED_EDGE('',*,*,#18199,.T.); +#18199 = EDGE_CURVE('',#18192,#18200,#18202,.T.); +#18200 = VERTEX_POINT('',#18201); +#18201 = CARTESIAN_POINT('',(4.68,-2.E-02,-1.5)); +#18202 = LINE('',#18203,#18204); +#18203 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#18204 = VECTOR('',#18205,1.); +#18205 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#18206 = ORIENTED_EDGE('',*,*,#18207,.T.); +#18207 = EDGE_CURVE('',#18200,#18208,#18210,.T.); +#18208 = VERTEX_POINT('',#18209); +#18209 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#18210 = LINE('',#18211,#18212); +#18211 = CARTESIAN_POINT('',(4.68,-2.E-02,-1.5)); +#18212 = VECTOR('',#18213,1.); +#18213 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#18214 = ORIENTED_EDGE('',*,*,#18215,.T.); +#18215 = EDGE_CURVE('',#18208,#17608,#18216,.T.); +#18216 = LINE('',#18217,#18218); +#18217 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#18218 = VECTOR('',#18219,1.); +#18219 = DIRECTION('',(0.,0.,1.)); +#18220 = ORIENTED_EDGE('',*,*,#17605,.F.); +#18221 = ORIENTED_EDGE('',*,*,#18222,.T.); +#18222 = EDGE_CURVE('',#17606,#18223,#18225,.T.); +#18223 = VERTEX_POINT('',#18224); +#18224 = CARTESIAN_POINT('',(4.68,0.32,-0.9)); +#18225 = LINE('',#18226,#18227); +#18226 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#18227 = VECTOR('',#18228,1.); +#18228 = DIRECTION('',(-0.,0.,-1.)); +#18229 = ORIENTED_EDGE('',*,*,#18230,.T.); +#18230 = EDGE_CURVE('',#18223,#18231,#18233,.T.); +#18231 = VERTEX_POINT('',#18232); +#18232 = CARTESIAN_POINT('',(4.68,0.62,-1.5)); +#18233 = LINE('',#18234,#18235); +#18234 = CARTESIAN_POINT('',(4.68,0.32,-0.9)); +#18235 = VECTOR('',#18236,1.); +#18236 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#18237 = ORIENTED_EDGE('',*,*,#18238,.T.); +#18238 = EDGE_CURVE('',#18231,#18190,#18239,.T.); +#18239 = LINE('',#18240,#18241); +#18240 = CARTESIAN_POINT('',(4.68,0.62,-1.5)); +#18241 = VECTOR('',#18242,1.); +#18242 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#18243 = PLANE('',#18244); +#18244 = AXIS2_PLACEMENT_3D('',#18245,#18246,#18247); +#18245 = CARTESIAN_POINT('',(4.68,3.65940088399E-02,1.522832428212)); +#18246 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18247 = DIRECTION('',(0.,0.,1.)); +#18248 = ADVANCED_FACE('',(#18249),#18267,.F.); +#18249 = FACE_BOUND('',#18250,.F.); +#18250 = EDGE_LOOP('',(#18251,#18259,#18265,#18266)); +#18251 = ORIENTED_EDGE('',*,*,#18252,.F.); +#18252 = EDGE_CURVE('',#18253,#17624,#18255,.T.); +#18253 = VERTEX_POINT('',#18254); +#18254 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#18255 = LINE('',#18256,#18257); +#18256 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#18257 = VECTOR('',#18258,1.); +#18258 = DIRECTION('',(0.,0.,1.)); +#18259 = ORIENTED_EDGE('',*,*,#18260,.T.); +#18260 = EDGE_CURVE('',#18253,#18208,#18261,.T.); +#18261 = LINE('',#18262,#18263); +#18262 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#18263 = VECTOR('',#18264,1.); +#18264 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18265 = ORIENTED_EDGE('',*,*,#18215,.T.); +#18266 = ORIENTED_EDGE('',*,*,#17631,.F.); +#18267 = PLANE('',#18268); +#18268 = AXIS2_PLACEMENT_3D('',#18269,#18270,#18271); +#18269 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#18270 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18271 = DIRECTION('',(0.,-0.,1.)); +#18272 = ADVANCED_FACE('',(#18273),#18323,.F.); +#18273 = FACE_BOUND('',#18274,.F.); +#18274 = EDGE_LOOP('',(#18275,#18285,#18293,#18299,#18300,#18301,#18309, + #18317)); +#18275 = ORIENTED_EDGE('',*,*,#18276,.T.); +#18276 = EDGE_CURVE('',#18277,#18279,#18281,.T.); +#18277 = VERTEX_POINT('',#18278); +#18278 = CARTESIAN_POINT('',(5.32,0.351578947368,-3.2)); +#18279 = VERTEX_POINT('',#18280); +#18280 = CARTESIAN_POINT('',(5.32,-0.288421052632,-3.2)); +#18281 = LINE('',#18282,#18283); +#18282 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#18283 = VECTOR('',#18284,1.); +#18284 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18285 = ORIENTED_EDGE('',*,*,#18286,.T.); +#18286 = EDGE_CURVE('',#18279,#18287,#18289,.T.); +#18287 = VERTEX_POINT('',#18288); +#18288 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#18289 = LINE('',#18290,#18291); +#18290 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#18291 = VECTOR('',#18292,1.); +#18292 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#18293 = ORIENTED_EDGE('',*,*,#18294,.T.); +#18294 = EDGE_CURVE('',#18287,#18253,#18295,.T.); +#18295 = LINE('',#18296,#18297); +#18296 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#18297 = VECTOR('',#18298,1.); +#18298 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#18299 = ORIENTED_EDGE('',*,*,#18252,.T.); +#18300 = ORIENTED_EDGE('',*,*,#17623,.F.); +#18301 = ORIENTED_EDGE('',*,*,#18302,.T.); +#18302 = EDGE_CURVE('',#17616,#18303,#18305,.T.); +#18303 = VERTEX_POINT('',#18304); +#18304 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#18305 = LINE('',#18306,#18307); +#18306 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#18307 = VECTOR('',#18308,1.); +#18308 = DIRECTION('',(-0.,0.,-1.)); +#18309 = ORIENTED_EDGE('',*,*,#18310,.T.); +#18310 = EDGE_CURVE('',#18303,#18311,#18313,.T.); +#18311 = VERTEX_POINT('',#18312); +#18312 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#18313 = LINE('',#18314,#18315); +#18314 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#18315 = VECTOR('',#18316,1.); +#18316 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#18317 = ORIENTED_EDGE('',*,*,#18318,.T.); +#18318 = EDGE_CURVE('',#18311,#18277,#18319,.T.); +#18319 = LINE('',#18320,#18321); +#18320 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#18321 = VECTOR('',#18322,1.); +#18322 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#18323 = PLANE('',#18324); +#18324 = AXIS2_PLACEMENT_3D('',#18325,#18326,#18327); +#18325 = CARTESIAN_POINT('',(5.32,3.65940088399E-02,1.522832428212)); +#18326 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18327 = DIRECTION('',(0.,0.,1.)); +#18328 = ADVANCED_FACE('',(#18329),#18340,.F.); +#18329 = FACE_BOUND('',#18330,.F.); +#18330 = EDGE_LOOP('',(#18331,#18332,#18333,#18334)); +#18331 = ORIENTED_EDGE('',*,*,#18302,.F.); +#18332 = ORIENTED_EDGE('',*,*,#17615,.F.); +#18333 = ORIENTED_EDGE('',*,*,#18222,.T.); +#18334 = ORIENTED_EDGE('',*,*,#18335,.F.); +#18335 = EDGE_CURVE('',#18303,#18223,#18336,.T.); +#18336 = LINE('',#18337,#18338); +#18337 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#18338 = VECTOR('',#18339,1.); +#18339 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18340 = PLANE('',#18341); +#18341 = AXIS2_PLACEMENT_3D('',#18342,#18343,#18344); +#18342 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#18343 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18344 = DIRECTION('',(-0.,0.,-1.)); +#18345 = ADVANCED_FACE('',(#18346),#18371,.F.); +#18346 = FACE_BOUND('',#18347,.T.); +#18347 = EDGE_LOOP('',(#18348,#18356,#18364,#18370)); +#18348 = ORIENTED_EDGE('',*,*,#18349,.F.); +#18349 = EDGE_CURVE('',#18350,#17647,#18352,.T.); +#18350 = VERTEX_POINT('',#18351); +#18351 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#18352 = LINE('',#18353,#18354); +#18353 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#18354 = VECTOR('',#18355,1.); +#18355 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#18356 = ORIENTED_EDGE('',*,*,#18357,.T.); +#18357 = EDGE_CURVE('',#18350,#18358,#18360,.T.); +#18358 = VERTEX_POINT('',#18359); +#18359 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#18360 = LINE('',#18361,#18362); +#18361 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#18362 = VECTOR('',#18363,1.); +#18363 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18364 = ORIENTED_EDGE('',*,*,#18365,.T.); +#18365 = EDGE_CURVE('',#18358,#17655,#18366,.T.); +#18366 = LINE('',#18367,#18368); +#18367 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#18368 = VECTOR('',#18369,1.); +#18369 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#18370 = ORIENTED_EDGE('',*,*,#17654,.F.); +#18371 = PLANE('',#18372); +#18372 = AXIS2_PLACEMENT_3D('',#18373,#18374,#18375); +#18373 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#18374 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#18375 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#18376 = ADVANCED_FACE('',(#18377),#18395,.T.); +#18377 = FACE_BOUND('',#18378,.F.); +#18378 = EDGE_LOOP('',(#18379,#18387,#18388,#18389)); +#18379 = ORIENTED_EDGE('',*,*,#18380,.T.); +#18380 = EDGE_CURVE('',#18381,#17677,#18383,.T.); +#18381 = VERTEX_POINT('',#18382); +#18382 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#18383 = LINE('',#18384,#18385); +#18384 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#18385 = VECTOR('',#18386,1.); +#18386 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#18387 = ORIENTED_EDGE('',*,*,#17686,.T.); +#18388 = ORIENTED_EDGE('',*,*,#18349,.F.); +#18389 = ORIENTED_EDGE('',*,*,#18390,.F.); +#18390 = EDGE_CURVE('',#18381,#18350,#18391,.T.); +#18391 = LINE('',#18392,#18393); +#18392 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#18393 = VECTOR('',#18394,1.); +#18394 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18395 = PLANE('',#18396); +#18396 = AXIS2_PLACEMENT_3D('',#18397,#18398,#18399); +#18397 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#18398 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#18399 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#18400 = ADVANCED_FACE('',(#18401),#18419,.T.); +#18401 = FACE_BOUND('',#18402,.F.); +#18402 = EDGE_LOOP('',(#18403,#18404,#18412,#18418)); +#18403 = ORIENTED_EDGE('',*,*,#18380,.F.); +#18404 = ORIENTED_EDGE('',*,*,#18405,.T.); +#18405 = EDGE_CURVE('',#18381,#18406,#18408,.T.); +#18406 = VERTEX_POINT('',#18407); +#18407 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#18408 = LINE('',#18409,#18410); +#18409 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#18410 = VECTOR('',#18411,1.); +#18411 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18412 = ORIENTED_EDGE('',*,*,#18413,.T.); +#18413 = EDGE_CURVE('',#18406,#17703,#18414,.T.); +#18414 = LINE('',#18415,#18416); +#18415 = CARTESIAN_POINT('',(0.146666666667,0.146666666667, + 6.473333333333)); +#18416 = VECTOR('',#18417,1.); +#18417 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#18418 = ORIENTED_EDGE('',*,*,#17702,.F.); +#18419 = PLANE('',#18420); +#18420 = AXIS2_PLACEMENT_3D('',#18421,#18422,#18423); +#18421 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#18422 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#18423 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#18424 = ADVANCED_FACE('',(#18425),#18436,.T.); +#18425 = FACE_BOUND('',#18426,.F.); +#18426 = EDGE_LOOP('',(#18427,#18428,#18434,#18435)); +#18427 = ORIENTED_EDGE('',*,*,#18413,.F.); +#18428 = ORIENTED_EDGE('',*,*,#18429,.T.); +#18429 = EDGE_CURVE('',#18406,#18358,#18430,.T.); +#18430 = LINE('',#18431,#18432); +#18431 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#18432 = VECTOR('',#18433,1.); +#18433 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18434 = ORIENTED_EDGE('',*,*,#18365,.T.); +#18435 = ORIENTED_EDGE('',*,*,#17725,.F.); +#18436 = PLANE('',#18437); +#18437 = AXIS2_PLACEMENT_3D('',#18438,#18439,#18440); +#18438 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#18439 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#18440 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#18441 = ADVANCED_FACE('',(#18442),#18467,.F.); +#18442 = FACE_BOUND('',#18443,.T.); +#18443 = EDGE_LOOP('',(#18444,#18452,#18460,#18466)); +#18444 = ORIENTED_EDGE('',*,*,#18445,.F.); +#18445 = EDGE_CURVE('',#18446,#17743,#18448,.T.); +#18446 = VERTEX_POINT('',#18447); +#18447 = CARTESIAN_POINT('',(4.88,-0.12,6.5)); +#18448 = LINE('',#18449,#18450); +#18449 = CARTESIAN_POINT('',(4.853333333333,-0.146666666667, + 6.473333333333)); +#18450 = VECTOR('',#18451,1.); +#18451 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#18452 = ORIENTED_EDGE('',*,*,#18453,.T.); +#18453 = EDGE_CURVE('',#18446,#18454,#18456,.T.); +#18454 = VERTEX_POINT('',#18455); +#18455 = CARTESIAN_POINT('',(4.88,0.12,6.5)); +#18456 = LINE('',#18457,#18458); +#18457 = CARTESIAN_POINT('',(4.88,-0.32,6.5)); +#18458 = VECTOR('',#18459,1.); +#18459 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18460 = ORIENTED_EDGE('',*,*,#18461,.T.); +#18461 = EDGE_CURVE('',#18454,#17751,#18462,.T.); +#18462 = LINE('',#18463,#18464); +#18463 = CARTESIAN_POINT('',(4.96,4.E-02,6.58)); +#18464 = VECTOR('',#18465,1.); +#18465 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#18466 = ORIENTED_EDGE('',*,*,#17750,.F.); +#18467 = PLANE('',#18468); +#18468 = AXIS2_PLACEMENT_3D('',#18469,#18470,#18471); +#18469 = CARTESIAN_POINT('',(4.78,-0.32,6.4)); +#18470 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#18471 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#18472 = ADVANCED_FACE('',(#18473),#18491,.T.); +#18473 = FACE_BOUND('',#18474,.F.); +#18474 = EDGE_LOOP('',(#18475,#18483,#18484,#18485)); +#18475 = ORIENTED_EDGE('',*,*,#18476,.T.); +#18476 = EDGE_CURVE('',#18477,#17773,#18479,.T.); +#18477 = VERTEX_POINT('',#18478); +#18478 = CARTESIAN_POINT('',(5.12,-0.12,6.5)); +#18479 = LINE('',#18480,#18481); +#18480 = CARTESIAN_POINT('',(5.253333333333,-0.253333333333, + 6.366666666667)); +#18481 = VECTOR('',#18482,1.); +#18482 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#18483 = ORIENTED_EDGE('',*,*,#17782,.T.); +#18484 = ORIENTED_EDGE('',*,*,#18445,.F.); +#18485 = ORIENTED_EDGE('',*,*,#18486,.F.); +#18486 = EDGE_CURVE('',#18477,#18446,#18487,.T.); +#18487 = LINE('',#18488,#18489); +#18488 = CARTESIAN_POINT('',(5.32,-0.12,6.5)); +#18489 = VECTOR('',#18490,1.); +#18490 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18491 = PLANE('',#18492); +#18492 = AXIS2_PLACEMENT_3D('',#18493,#18494,#18495); +#18493 = CARTESIAN_POINT('',(5.32,-0.22,6.4)); +#18494 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#18495 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#18496 = ADVANCED_FACE('',(#18497),#18515,.T.); +#18497 = FACE_BOUND('',#18498,.F.); +#18498 = EDGE_LOOP('',(#18499,#18500,#18508,#18514)); +#18499 = ORIENTED_EDGE('',*,*,#18476,.F.); +#18500 = ORIENTED_EDGE('',*,*,#18501,.T.); +#18501 = EDGE_CURVE('',#18477,#18502,#18504,.T.); +#18502 = VERTEX_POINT('',#18503); +#18503 = CARTESIAN_POINT('',(5.12,0.12,6.5)); +#18504 = LINE('',#18505,#18506); +#18505 = CARTESIAN_POINT('',(5.12,-0.32,6.5)); +#18506 = VECTOR('',#18507,1.); +#18507 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18508 = ORIENTED_EDGE('',*,*,#18509,.T.); +#18509 = EDGE_CURVE('',#18502,#17799,#18510,.T.); +#18510 = LINE('',#18511,#18512); +#18511 = CARTESIAN_POINT('',(5.146666666667,0.146666666667, + 6.473333333333)); +#18512 = VECTOR('',#18513,1.); +#18513 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#18514 = ORIENTED_EDGE('',*,*,#17798,.F.); +#18515 = PLANE('',#18516); +#18516 = AXIS2_PLACEMENT_3D('',#18517,#18518,#18519); +#18517 = CARTESIAN_POINT('',(5.22,-0.32,6.4)); +#18518 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#18519 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#18520 = ADVANCED_FACE('',(#18521),#18532,.T.); +#18521 = FACE_BOUND('',#18522,.F.); +#18522 = EDGE_LOOP('',(#18523,#18524,#18530,#18531)); +#18523 = ORIENTED_EDGE('',*,*,#18509,.F.); +#18524 = ORIENTED_EDGE('',*,*,#18525,.T.); +#18525 = EDGE_CURVE('',#18502,#18454,#18526,.T.); +#18526 = LINE('',#18527,#18528); +#18527 = CARTESIAN_POINT('',(5.32,0.12,6.5)); +#18528 = VECTOR('',#18529,1.); +#18529 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18530 = ORIENTED_EDGE('',*,*,#18461,.T.); +#18531 = ORIENTED_EDGE('',*,*,#17821,.F.); +#18532 = PLANE('',#18533); +#18533 = AXIS2_PLACEMENT_3D('',#18534,#18535,#18536); +#18534 = CARTESIAN_POINT('',(5.32,0.22,6.4)); +#18535 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#18536 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#18537 = ADVANCED_FACE('',(#18538),#18563,.F.); +#18538 = FACE_BOUND('',#18539,.T.); +#18539 = EDGE_LOOP('',(#18540,#18548,#18556,#18562)); +#18540 = ORIENTED_EDGE('',*,*,#18541,.F.); +#18541 = EDGE_CURVE('',#18542,#17839,#18544,.T.); +#18542 = VERTEX_POINT('',#18543); +#18543 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#18544 = LINE('',#18545,#18546); +#18545 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#18546 = VECTOR('',#18547,1.); +#18547 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#18548 = ORIENTED_EDGE('',*,*,#18549,.T.); +#18549 = EDGE_CURVE('',#18542,#18550,#18552,.T.); +#18550 = VERTEX_POINT('',#18551); +#18551 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#18552 = LINE('',#18553,#18554); +#18553 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#18554 = VECTOR('',#18555,1.); +#18555 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18556 = ORIENTED_EDGE('',*,*,#18557,.T.); +#18557 = EDGE_CURVE('',#18550,#17847,#18558,.T.); +#18558 = LINE('',#18559,#18560); +#18559 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#18560 = VECTOR('',#18561,1.); +#18561 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#18562 = ORIENTED_EDGE('',*,*,#17846,.F.); +#18563 = PLANE('',#18564); +#18564 = AXIS2_PLACEMENT_3D('',#18565,#18566,#18567); +#18565 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#18566 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#18567 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#18568 = ADVANCED_FACE('',(#18569),#18587,.T.); +#18569 = FACE_BOUND('',#18570,.F.); +#18570 = EDGE_LOOP('',(#18571,#18579,#18580,#18581)); +#18571 = ORIENTED_EDGE('',*,*,#18572,.F.); +#18572 = EDGE_CURVE('',#17869,#18573,#18575,.T.); +#18573 = VERTEX_POINT('',#18574); +#18574 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#18575 = LINE('',#18576,#18577); +#18576 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#18577 = VECTOR('',#18578,1.); +#18578 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#18579 = ORIENTED_EDGE('',*,*,#17878,.T.); +#18580 = ORIENTED_EDGE('',*,*,#18541,.F.); +#18581 = ORIENTED_EDGE('',*,*,#18582,.F.); +#18582 = EDGE_CURVE('',#18573,#18542,#18583,.T.); +#18583 = LINE('',#18584,#18585); +#18584 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#18585 = VECTOR('',#18586,1.); +#18586 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18587 = PLANE('',#18588); +#18588 = AXIS2_PLACEMENT_3D('',#18589,#18590,#18591); +#18589 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#18590 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#18591 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#18592 = ADVANCED_FACE('',(#18593),#18611,.T.); +#18593 = FACE_BOUND('',#18594,.F.); +#18594 = EDGE_LOOP('',(#18595,#18596,#18604,#18610)); +#18595 = ORIENTED_EDGE('',*,*,#18572,.T.); +#18596 = ORIENTED_EDGE('',*,*,#18597,.T.); +#18597 = EDGE_CURVE('',#18573,#18598,#18600,.T.); +#18598 = VERTEX_POINT('',#18599); +#18599 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#18600 = LINE('',#18601,#18602); +#18601 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#18602 = VECTOR('',#18603,1.); +#18603 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18604 = ORIENTED_EDGE('',*,*,#18605,.T.); +#18605 = EDGE_CURVE('',#18598,#17895,#18606,.T.); +#18606 = LINE('',#18607,#18608); +#18607 = CARTESIAN_POINT('',(2.646666666667,0.146666666667, + 6.473333333333)); +#18608 = VECTOR('',#18609,1.); +#18609 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#18610 = ORIENTED_EDGE('',*,*,#17894,.F.); +#18611 = PLANE('',#18612); +#18612 = AXIS2_PLACEMENT_3D('',#18613,#18614,#18615); +#18613 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#18614 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#18615 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#18616 = ADVANCED_FACE('',(#18617),#18628,.T.); +#18617 = FACE_BOUND('',#18618,.F.); +#18618 = EDGE_LOOP('',(#18619,#18620,#18626,#18627)); +#18619 = ORIENTED_EDGE('',*,*,#18605,.F.); +#18620 = ORIENTED_EDGE('',*,*,#18621,.T.); +#18621 = EDGE_CURVE('',#18598,#18550,#18622,.T.); +#18622 = LINE('',#18623,#18624); +#18623 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#18624 = VECTOR('',#18625,1.); +#18625 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18626 = ORIENTED_EDGE('',*,*,#18557,.T.); +#18627 = ORIENTED_EDGE('',*,*,#17917,.F.); +#18628 = PLANE('',#18629); +#18629 = AXIS2_PLACEMENT_3D('',#18630,#18631,#18632); +#18630 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#18631 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#18632 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#18633 = ADVANCED_FACE('',(#18634),#18675,.F.); +#18634 = FACE_BOUND('',#18635,.T.); +#18635 = EDGE_LOOP('',(#18636,#18646,#18654,#18662,#18668,#18669)); +#18636 = ORIENTED_EDGE('',*,*,#18637,.F.); +#18637 = EDGE_CURVE('',#18638,#18640,#18642,.T.); +#18638 = VERTEX_POINT('',#18639); +#18639 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#18640 = VERTEX_POINT('',#18641); +#18641 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#18642 = LINE('',#18643,#18644); +#18643 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#18644 = VECTOR('',#18645,1.); +#18645 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#18646 = ORIENTED_EDGE('',*,*,#18647,.T.); +#18647 = EDGE_CURVE('',#18638,#18648,#18650,.T.); +#18648 = VERTEX_POINT('',#18649); +#18649 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#18650 = LINE('',#18651,#18652); +#18651 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#18652 = VECTOR('',#18653,1.); +#18653 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18654 = ORIENTED_EDGE('',*,*,#18655,.T.); +#18655 = EDGE_CURVE('',#18648,#18656,#18658,.T.); +#18656 = VERTEX_POINT('',#18657); +#18657 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#18658 = LINE('',#18659,#18660); +#18659 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#18660 = VECTOR('',#18661,1.); +#18661 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#18662 = ORIENTED_EDGE('',*,*,#18663,.T.); +#18663 = EDGE_CURVE('',#18656,#17936,#18664,.T.); +#18664 = LINE('',#18665,#18666); +#18665 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#18666 = VECTOR('',#18667,1.); +#18667 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#18668 = ORIENTED_EDGE('',*,*,#17933,.F.); +#18669 = ORIENTED_EDGE('',*,*,#18670,.F.); +#18670 = EDGE_CURVE('',#18640,#17934,#18671,.T.); +#18671 = LINE('',#18672,#18673); +#18672 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#18673 = VECTOR('',#18674,1.); +#18674 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#18675 = PLANE('',#18676); +#18676 = AXIS2_PLACEMENT_3D('',#18677,#18678,#18679); +#18677 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#18678 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#18679 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#18680 = ADVANCED_FACE('',(#18681),#18706,.F.); +#18681 = FACE_BOUND('',#18682,.F.); +#18682 = EDGE_LOOP('',(#18683,#18684,#18690,#18691,#18692,#18700)); +#18683 = ORIENTED_EDGE('',*,*,#18062,.F.); +#18684 = ORIENTED_EDGE('',*,*,#18685,.T.); +#18685 = EDGE_CURVE('',#18055,#17975,#18686,.T.); +#18686 = LINE('',#18687,#18688); +#18687 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#18688 = VECTOR('',#18689,1.); +#18689 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18690 = ORIENTED_EDGE('',*,*,#17982,.T.); +#18691 = ORIENTED_EDGE('',*,*,#18670,.F.); +#18692 = ORIENTED_EDGE('',*,*,#18693,.F.); +#18693 = EDGE_CURVE('',#18694,#18640,#18696,.T.); +#18694 = VERTEX_POINT('',#18695); +#18695 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#18696 = LINE('',#18697,#18698); +#18697 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#18698 = VECTOR('',#18699,1.); +#18699 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18700 = ORIENTED_EDGE('',*,*,#18701,.T.); +#18701 = EDGE_CURVE('',#18694,#18021,#18702,.T.); +#18702 = LINE('',#18703,#18704); +#18703 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#18704 = VECTOR('',#18705,1.); +#18705 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#18706 = PLANE('',#18707); +#18707 = AXIS2_PLACEMENT_3D('',#18708,#18709,#18710); +#18708 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#18709 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#18710 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#18711 = ADVANCED_FACE('',(#18712),#18718,.F.); +#18712 = FACE_BOUND('',#18713,.F.); +#18713 = EDGE_LOOP('',(#18714,#18715,#18716,#18717)); +#18714 = ORIENTED_EDGE('',*,*,#18079,.T.); +#18715 = ORIENTED_EDGE('',*,*,#17974,.T.); +#18716 = ORIENTED_EDGE('',*,*,#18685,.F.); +#18717 = ORIENTED_EDGE('',*,*,#18054,.F.); +#18718 = PLANE('',#18719); +#18719 = AXIS2_PLACEMENT_3D('',#18720,#18721,#18722); +#18720 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#18721 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#18722 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#18723 = ADVANCED_FACE('',(#18724),#18735,.F.); +#18724 = FACE_BOUND('',#18725,.F.); +#18725 = EDGE_LOOP('',(#18726,#18732,#18733,#18734)); +#18726 = ORIENTED_EDGE('',*,*,#18727,.T.); +#18727 = EDGE_CURVE('',#18031,#17944,#18728,.T.); +#18728 = LINE('',#18729,#18730); +#18729 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#18730 = VECTOR('',#18731,1.); +#18731 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18732 = ORIENTED_EDGE('',*,*,#17951,.T.); +#18733 = ORIENTED_EDGE('',*,*,#18004,.F.); +#18734 = ORIENTED_EDGE('',*,*,#18038,.F.); +#18735 = PLANE('',#18736); +#18736 = AXIS2_PLACEMENT_3D('',#18737,#18738,#18739); +#18737 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#18738 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#18739 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#18740 = ADVANCED_FACE('',(#18741),#18761,.F.); +#18741 = FACE_BOUND('',#18742,.F.); +#18742 = EDGE_LOOP('',(#18743,#18744,#18752,#18758,#18759,#18760)); +#18743 = ORIENTED_EDGE('',*,*,#18030,.F.); +#18744 = ORIENTED_EDGE('',*,*,#18745,.F.); +#18745 = EDGE_CURVE('',#18746,#18023,#18748,.T.); +#18746 = VERTEX_POINT('',#18747); +#18747 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#18748 = LINE('',#18749,#18750); +#18749 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#18750 = VECTOR('',#18751,1.); +#18751 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#18752 = ORIENTED_EDGE('',*,*,#18753,.T.); +#18753 = EDGE_CURVE('',#18746,#18656,#18754,.T.); +#18754 = LINE('',#18755,#18756); +#18755 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#18756 = VECTOR('',#18757,1.); +#18757 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18758 = ORIENTED_EDGE('',*,*,#18663,.T.); +#18759 = ORIENTED_EDGE('',*,*,#17943,.T.); +#18760 = ORIENTED_EDGE('',*,*,#18727,.F.); +#18761 = PLANE('',#18762); +#18762 = AXIS2_PLACEMENT_3D('',#18763,#18764,#18765); +#18763 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#18764 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#18765 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#18766 = ADVANCED_FACE('',(#18767),#18794,.T.); +#18767 = FACE_BOUND('',#18768,.F.); +#18768 = EDGE_LOOP('',(#18769,#18777,#18785,#18791,#18792,#18793)); +#18769 = ORIENTED_EDGE('',*,*,#18770,.F.); +#18770 = EDGE_CURVE('',#18771,#18694,#18773,.T.); +#18771 = VERTEX_POINT('',#18772); +#18772 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#18773 = LINE('',#18774,#18775); +#18774 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225 + )); +#18775 = VECTOR('',#18776,1.); +#18776 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#18777 = ORIENTED_EDGE('',*,*,#18778,.T.); +#18778 = EDGE_CURVE('',#18771,#18779,#18781,.T.); +#18779 = VERTEX_POINT('',#18780); +#18780 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#18781 = LINE('',#18782,#18783); +#18782 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#18783 = VECTOR('',#18784,1.); +#18784 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18785 = ORIENTED_EDGE('',*,*,#18786,.T.); +#18786 = EDGE_CURVE('',#18779,#18746,#18787,.T.); +#18787 = LINE('',#18788,#18789); +#18788 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#18789 = VECTOR('',#18790,1.); +#18790 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#18791 = ORIENTED_EDGE('',*,*,#18745,.T.); +#18792 = ORIENTED_EDGE('',*,*,#18020,.F.); +#18793 = ORIENTED_EDGE('',*,*,#18701,.F.); +#18794 = PLANE('',#18795); +#18795 = AXIS2_PLACEMENT_3D('',#18796,#18797,#18798); +#18796 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#18797 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#18798 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#18799 = ADVANCED_FACE('',(#18800),#18825,.F.); +#18800 = FACE_BOUND('',#18801,.T.); +#18801 = EDGE_LOOP('',(#18802,#18810,#18818,#18824)); +#18802 = ORIENTED_EDGE('',*,*,#18803,.F.); +#18803 = EDGE_CURVE('',#18804,#18094,#18806,.T.); +#18804 = VERTEX_POINT('',#18805); +#18805 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#18806 = LINE('',#18807,#18808); +#18807 = CARTESIAN_POINT('',(2.353333333333,0.146666666667, + -3.373333333333)); +#18808 = VECTOR('',#18809,1.); +#18809 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#18810 = ORIENTED_EDGE('',*,*,#18811,.T.); +#18811 = EDGE_CURVE('',#18804,#18812,#18814,.T.); +#18812 = VERTEX_POINT('',#18813); +#18813 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#18814 = LINE('',#18815,#18816); +#18815 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#18816 = VECTOR('',#18817,1.); +#18817 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18818 = ORIENTED_EDGE('',*,*,#18819,.T.); +#18819 = EDGE_CURVE('',#18812,#18096,#18820,.T.); +#18820 = LINE('',#18821,#18822); +#18821 = CARTESIAN_POINT('',(2.46,-4.E-02,-3.48)); +#18822 = VECTOR('',#18823,1.); +#18823 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#18824 = ORIENTED_EDGE('',*,*,#18093,.F.); +#18825 = PLANE('',#18826); +#18826 = AXIS2_PLACEMENT_3D('',#18827,#18828,#18829); +#18827 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#18828 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#18829 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#18830 = ADVANCED_FACE('',(#18831),#18849,.T.); +#18831 = FACE_BOUND('',#18832,.F.); +#18832 = EDGE_LOOP('',(#18833,#18841,#18847,#18848)); +#18833 = ORIENTED_EDGE('',*,*,#18834,.F.); +#18834 = EDGE_CURVE('',#18835,#18125,#18837,.T.); +#18835 = VERTEX_POINT('',#18836); +#18836 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#18837 = LINE('',#18838,#18839); +#18838 = CARTESIAN_POINT('',(2.646666666667,-0.146666666667, + -3.373333333333)); +#18839 = VECTOR('',#18840,1.); +#18840 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#18841 = ORIENTED_EDGE('',*,*,#18842,.T.); +#18842 = EDGE_CURVE('',#18835,#18812,#18843,.T.); +#18843 = LINE('',#18844,#18845); +#18844 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#18845 = VECTOR('',#18846,1.); +#18846 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18847 = ORIENTED_EDGE('',*,*,#18819,.T.); +#18848 = ORIENTED_EDGE('',*,*,#18132,.F.); +#18849 = PLANE('',#18850); +#18850 = AXIS2_PLACEMENT_3D('',#18851,#18852,#18853); +#18851 = CARTESIAN_POINT('',(2.82,-0.22,-3.3)); +#18852 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#18853 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#18854 = ADVANCED_FACE('',(#18855),#18873,.T.); +#18855 = FACE_BOUND('',#18856,.F.); +#18856 = EDGE_LOOP('',(#18857,#18865,#18871,#18872)); +#18857 = ORIENTED_EDGE('',*,*,#18858,.F.); +#18858 = EDGE_CURVE('',#18859,#18149,#18861,.T.); +#18859 = VERTEX_POINT('',#18860); +#18860 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#18861 = LINE('',#18862,#18863); +#18862 = CARTESIAN_POINT('',(2.753333333333,0.253333333333, + -3.266666666667)); +#18863 = VECTOR('',#18864,1.); +#18864 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#18865 = ORIENTED_EDGE('',*,*,#18866,.T.); +#18866 = EDGE_CURVE('',#18859,#18835,#18867,.T.); +#18867 = LINE('',#18868,#18869); +#18868 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#18869 = VECTOR('',#18870,1.); +#18870 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18871 = ORIENTED_EDGE('',*,*,#18834,.T.); +#18872 = ORIENTED_EDGE('',*,*,#18148,.F.); +#18873 = PLANE('',#18874); +#18874 = AXIS2_PLACEMENT_3D('',#18875,#18876,#18877); +#18875 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#18876 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#18877 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#18878 = ADVANCED_FACE('',(#18879),#18890,.T.); +#18879 = FACE_BOUND('',#18880,.T.); +#18880 = EDGE_LOOP('',(#18881,#18882,#18888,#18889)); +#18881 = ORIENTED_EDGE('',*,*,#18858,.F.); +#18882 = ORIENTED_EDGE('',*,*,#18883,.T.); +#18883 = EDGE_CURVE('',#18859,#18804,#18884,.T.); +#18884 = LINE('',#18885,#18886); +#18885 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#18886 = VECTOR('',#18887,1.); +#18887 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18888 = ORIENTED_EDGE('',*,*,#18803,.T.); +#18889 = ORIENTED_EDGE('',*,*,#18175,.F.); +#18890 = PLANE('',#18891); +#18891 = AXIS2_PLACEMENT_3D('',#18892,#18893,#18894); +#18892 = CARTESIAN_POINT('',(2.82,0.22,-3.3)); +#18893 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187 + )); +#18894 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#18895 = ADVANCED_FACE('',(#18896),#18937,.F.); +#18896 = FACE_BOUND('',#18897,.T.); +#18897 = EDGE_LOOP('',(#18898,#18908,#18916,#18924,#18930,#18931)); +#18898 = ORIENTED_EDGE('',*,*,#18899,.F.); +#18899 = EDGE_CURVE('',#18900,#18902,#18904,.T.); +#18900 = VERTEX_POINT('',#18901); +#18901 = CARTESIAN_POINT('',(4.88,0.12,-3.4)); +#18902 = VERTEX_POINT('',#18903); +#18903 = CARTESIAN_POINT('',(4.682447406934,0.351192514695, + -3.202447406934)); +#18904 = LINE('',#18905,#18906); +#18905 = CARTESIAN_POINT('',(4.846150901889,0.159613036666, + -3.366150901889)); +#18906 = VECTOR('',#18907,1.); +#18907 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#18908 = ORIENTED_EDGE('',*,*,#18909,.T.); +#18909 = EDGE_CURVE('',#18900,#18910,#18912,.T.); +#18910 = VERTEX_POINT('',#18911); +#18911 = CARTESIAN_POINT('',(4.88,-0.12,-3.4)); +#18912 = LINE('',#18913,#18914); +#18913 = CARTESIAN_POINT('',(4.88,0.32,-3.4)); +#18914 = VECTOR('',#18915,1.); +#18915 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18916 = ORIENTED_EDGE('',*,*,#18917,.T.); +#18917 = EDGE_CURVE('',#18910,#18918,#18920,.T.); +#18918 = VERTEX_POINT('',#18919); +#18919 = CARTESIAN_POINT('',(4.682447406934,-0.288807485305, + -3.202447406934)); +#18920 = LINE('',#18921,#18922); +#18921 = CARTESIAN_POINT('',(4.961511443392,-5.034896900541E-02, + -3.481511443392)); +#18922 = VECTOR('',#18923,1.); +#18923 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#18924 = ORIENTED_EDGE('',*,*,#18925,.T.); +#18925 = EDGE_CURVE('',#18918,#18192,#18926,.T.); +#18926 = LINE('',#18927,#18928); +#18927 = CARTESIAN_POINT('',(4.914309165527,-0.325417236662, + -3.434309165527)); +#18928 = VECTOR('',#18929,1.); +#18929 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#18930 = ORIENTED_EDGE('',*,*,#18189,.F.); +#18931 = ORIENTED_EDGE('',*,*,#18932,.F.); +#18932 = EDGE_CURVE('',#18902,#18190,#18933,.T.); +#18933 = LINE('',#18934,#18935); +#18934 = CARTESIAN_POINT('',(4.458413132695,0.386566347469, + -2.978413132695)); +#18935 = VECTOR('',#18936,1.); +#18936 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#18937 = PLANE('',#18938); +#18938 = AXIS2_PLACEMENT_3D('',#18939,#18940,#18941); +#18939 = CARTESIAN_POINT('',(4.78,0.32,-3.3)); +#18940 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#18941 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#18942 = ADVANCED_FACE('',(#18943),#18968,.F.); +#18943 = FACE_BOUND('',#18944,.F.); +#18944 = EDGE_LOOP('',(#18945,#18946,#18952,#18953,#18954,#18962)); +#18945 = ORIENTED_EDGE('',*,*,#18318,.F.); +#18946 = ORIENTED_EDGE('',*,*,#18947,.T.); +#18947 = EDGE_CURVE('',#18311,#18231,#18948,.T.); +#18948 = LINE('',#18949,#18950); +#18949 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#18950 = VECTOR('',#18951,1.); +#18951 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18952 = ORIENTED_EDGE('',*,*,#18238,.T.); +#18953 = ORIENTED_EDGE('',*,*,#18932,.F.); +#18954 = ORIENTED_EDGE('',*,*,#18955,.F.); +#18955 = EDGE_CURVE('',#18956,#18902,#18958,.T.); +#18956 = VERTEX_POINT('',#18957); +#18957 = CARTESIAN_POINT('',(5.317552593066,0.351192514695, + -3.202447406934)); +#18958 = LINE('',#18959,#18960); +#18959 = CARTESIAN_POINT('',(5.32,0.351192514695,-3.202447406934)); +#18960 = VECTOR('',#18961,1.); +#18961 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18962 = ORIENTED_EDGE('',*,*,#18963,.T.); +#18963 = EDGE_CURVE('',#18956,#18277,#18964,.T.); +#18964 = LINE('',#18965,#18966); +#18965 = CARTESIAN_POINT('',(5.699616963064,0.411518467852, + -2.820383036936)); +#18966 = VECTOR('',#18967,1.); +#18967 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#18968 = PLANE('',#18969); +#18969 = AXIS2_PLACEMENT_3D('',#18970,#18971,#18972); +#18970 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#18971 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#18972 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#18973 = ADVANCED_FACE('',(#18974),#18980,.F.); +#18974 = FACE_BOUND('',#18975,.F.); +#18975 = EDGE_LOOP('',(#18976,#18977,#18978,#18979)); +#18976 = ORIENTED_EDGE('',*,*,#18335,.T.); +#18977 = ORIENTED_EDGE('',*,*,#18230,.T.); +#18978 = ORIENTED_EDGE('',*,*,#18947,.F.); +#18979 = ORIENTED_EDGE('',*,*,#18310,.F.); +#18980 = PLANE('',#18981); +#18981 = AXIS2_PLACEMENT_3D('',#18982,#18983,#18984); +#18982 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#18983 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#18984 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#18985 = ADVANCED_FACE('',(#18986),#18997,.F.); +#18986 = FACE_BOUND('',#18987,.F.); +#18987 = EDGE_LOOP('',(#18988,#18994,#18995,#18996)); +#18988 = ORIENTED_EDGE('',*,*,#18989,.T.); +#18989 = EDGE_CURVE('',#18287,#18200,#18990,.T.); +#18990 = LINE('',#18991,#18992); +#18991 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#18992 = VECTOR('',#18993,1.); +#18993 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18994 = ORIENTED_EDGE('',*,*,#18207,.T.); +#18995 = ORIENTED_EDGE('',*,*,#18260,.F.); +#18996 = ORIENTED_EDGE('',*,*,#18294,.F.); +#18997 = PLANE('',#18998); +#18998 = AXIS2_PLACEMENT_3D('',#18999,#19000,#19001); +#18999 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#19000 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#19001 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#19002 = ADVANCED_FACE('',(#19003),#19023,.F.); +#19003 = FACE_BOUND('',#19004,.F.); +#19004 = EDGE_LOOP('',(#19005,#19006,#19014,#19020,#19021,#19022)); +#19005 = ORIENTED_EDGE('',*,*,#18286,.F.); +#19006 = ORIENTED_EDGE('',*,*,#19007,.F.); +#19007 = EDGE_CURVE('',#19008,#18279,#19010,.T.); +#19008 = VERTEX_POINT('',#19009); +#19009 = CARTESIAN_POINT('',(5.317552593066,-0.288807485305, + -3.202447406934)); +#19010 = LINE('',#19011,#19012); +#19011 = CARTESIAN_POINT('',(5.243720930233,-0.300465116279, + -3.276279069767)); +#19012 = VECTOR('',#19013,1.); +#19013 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#19014 = ORIENTED_EDGE('',*,*,#19015,.T.); +#19015 = EDGE_CURVE('',#19008,#18918,#19016,.T.); +#19016 = LINE('',#19017,#19018); +#19017 = CARTESIAN_POINT('',(5.32,-0.288807485305,-3.202447406934)); +#19018 = VECTOR('',#19019,1.); +#19019 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19020 = ORIENTED_EDGE('',*,*,#18925,.T.); +#19021 = ORIENTED_EDGE('',*,*,#18199,.T.); +#19022 = ORIENTED_EDGE('',*,*,#18989,.F.); +#19023 = PLANE('',#19024); +#19024 = AXIS2_PLACEMENT_3D('',#19025,#19026,#19027); +#19025 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#19026 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#19027 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#19028 = ADVANCED_FACE('',(#19029),#19056,.T.); +#19029 = FACE_BOUND('',#19030,.F.); +#19030 = EDGE_LOOP('',(#19031,#19039,#19047,#19053,#19054,#19055)); +#19031 = ORIENTED_EDGE('',*,*,#19032,.F.); +#19032 = EDGE_CURVE('',#19033,#18956,#19035,.T.); +#19033 = VERTEX_POINT('',#19034); +#19034 = CARTESIAN_POINT('',(5.12,0.12,-3.4)); +#19035 = LINE('',#19036,#19037); +#19036 = CARTESIAN_POINT('',(5.24881689775,0.270752273427,-3.27118310225 + )); +#19037 = VECTOR('',#19038,1.); +#19038 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#19039 = ORIENTED_EDGE('',*,*,#19040,.T.); +#19040 = EDGE_CURVE('',#19033,#19041,#19043,.T.); +#19041 = VERTEX_POINT('',#19042); +#19042 = CARTESIAN_POINT('',(5.12,-0.12,-3.4)); +#19043 = LINE('',#19044,#19045); +#19044 = CARTESIAN_POINT('',(5.12,0.32,-3.4)); +#19045 = VECTOR('',#19046,1.); +#19046 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19047 = ORIENTED_EDGE('',*,*,#19048,.T.); +#19048 = EDGE_CURVE('',#19041,#19008,#19049,.T.); +#19049 = LINE('',#19050,#19051); +#19050 = CARTESIAN_POINT('',(5.155697812072,-0.150503562587, + -3.364302187928)); +#19051 = VECTOR('',#19052,1.); +#19052 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#19053 = ORIENTED_EDGE('',*,*,#19007,.T.); +#19054 = ORIENTED_EDGE('',*,*,#18276,.F.); +#19055 = ORIENTED_EDGE('',*,*,#18963,.F.); +#19056 = PLANE('',#19057); +#19057 = AXIS2_PLACEMENT_3D('',#19058,#19059,#19060); +#19058 = CARTESIAN_POINT('',(5.22,0.32,-3.3)); +#19059 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#19060 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#19061 = ADVANCED_FACE('',(#19062),#19068,.F.); +#19062 = FACE_BOUND('',#19063,.F.); +#19063 = EDGE_LOOP('',(#19064,#19065,#19066,#19067)); +#19064 = ORIENTED_EDGE('',*,*,#18357,.T.); +#19065 = ORIENTED_EDGE('',*,*,#18429,.F.); +#19066 = ORIENTED_EDGE('',*,*,#18405,.F.); +#19067 = ORIENTED_EDGE('',*,*,#18390,.T.); +#19068 = PLANE('',#19069); +#19069 = AXIS2_PLACEMENT_3D('',#19070,#19071,#19072); +#19070 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#19071 = DIRECTION('',(-0.,0.,-1.)); +#19072 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19073 = ADVANCED_FACE('',(#19074),#19080,.F.); +#19074 = FACE_BOUND('',#19075,.F.); +#19075 = EDGE_LOOP('',(#19076,#19077,#19078,#19079)); +#19076 = ORIENTED_EDGE('',*,*,#18453,.T.); +#19077 = ORIENTED_EDGE('',*,*,#18525,.F.); +#19078 = ORIENTED_EDGE('',*,*,#18501,.F.); +#19079 = ORIENTED_EDGE('',*,*,#18486,.T.); +#19080 = PLANE('',#19081); +#19081 = AXIS2_PLACEMENT_3D('',#19082,#19083,#19084); +#19082 = CARTESIAN_POINT('',(5.32,-0.32,6.5)); +#19083 = DIRECTION('',(-0.,0.,-1.)); +#19084 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19085 = ADVANCED_FACE('',(#19086),#19092,.F.); +#19086 = FACE_BOUND('',#19087,.F.); +#19087 = EDGE_LOOP('',(#19088,#19089,#19090,#19091)); +#19088 = ORIENTED_EDGE('',*,*,#18621,.F.); +#19089 = ORIENTED_EDGE('',*,*,#18597,.F.); +#19090 = ORIENTED_EDGE('',*,*,#18582,.T.); +#19091 = ORIENTED_EDGE('',*,*,#18549,.T.); +#19092 = PLANE('',#19093); +#19093 = AXIS2_PLACEMENT_3D('',#19094,#19095,#19096); +#19094 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#19095 = DIRECTION('',(-0.,0.,-1.)); +#19096 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19097 = ADVANCED_FACE('',(#19098),#19109,.T.); +#19098 = FACE_BOUND('',#19099,.T.); +#19099 = EDGE_LOOP('',(#19100,#19101,#19107,#19108)); +#19100 = ORIENTED_EDGE('',*,*,#18770,.F.); +#19101 = ORIENTED_EDGE('',*,*,#19102,.T.); +#19102 = EDGE_CURVE('',#18771,#18638,#19103,.T.); +#19103 = LINE('',#19104,#19105); +#19104 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#19105 = VECTOR('',#19106,1.); +#19106 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19107 = ORIENTED_EDGE('',*,*,#18637,.T.); +#19108 = ORIENTED_EDGE('',*,*,#18693,.F.); +#19109 = PLANE('',#19110); +#19110 = AXIS2_PLACEMENT_3D('',#19111,#19112,#19113); +#19111 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#19112 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#19113 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#19114 = ADVANCED_FACE('',(#19115),#19126,.F.); +#19115 = FACE_BOUND('',#19116,.F.); +#19116 = EDGE_LOOP('',(#19117,#19118,#19119,#19125)); +#19117 = ORIENTED_EDGE('',*,*,#19102,.T.); +#19118 = ORIENTED_EDGE('',*,*,#18647,.T.); +#19119 = ORIENTED_EDGE('',*,*,#19120,.F.); +#19120 = EDGE_CURVE('',#18779,#18648,#19121,.T.); +#19121 = LINE('',#19122,#19123); +#19122 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#19123 = VECTOR('',#19124,1.); +#19124 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19125 = ORIENTED_EDGE('',*,*,#18778,.F.); +#19126 = PLANE('',#19127); +#19127 = AXIS2_PLACEMENT_3D('',#19128,#19129,#19130); +#19128 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#19129 = DIRECTION('',(0.,0.,1.)); +#19130 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19131 = ADVANCED_FACE('',(#19132),#19138,.T.); +#19132 = FACE_BOUND('',#19133,.F.); +#19133 = EDGE_LOOP('',(#19134,#19135,#19136,#19137)); +#19134 = ORIENTED_EDGE('',*,*,#18786,.F.); +#19135 = ORIENTED_EDGE('',*,*,#19120,.T.); +#19136 = ORIENTED_EDGE('',*,*,#18655,.T.); +#19137 = ORIENTED_EDGE('',*,*,#18753,.F.); +#19138 = PLANE('',#19139); +#19139 = AXIS2_PLACEMENT_3D('',#19140,#19141,#19142); +#19140 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#19141 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#19142 = DIRECTION('',(1.,-1.224646799148E-16,-5.515863360725E-29)); +#19143 = ADVANCED_FACE('',(#19144),#19150,.F.); +#19144 = FACE_BOUND('',#19145,.F.); +#19145 = EDGE_LOOP('',(#19146,#19147,#19148,#19149)); +#19146 = ORIENTED_EDGE('',*,*,#18866,.F.); +#19147 = ORIENTED_EDGE('',*,*,#18883,.T.); +#19148 = ORIENTED_EDGE('',*,*,#18811,.T.); +#19149 = ORIENTED_EDGE('',*,*,#18842,.F.); +#19150 = PLANE('',#19151); +#19151 = AXIS2_PLACEMENT_3D('',#19152,#19153,#19154); +#19152 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#19153 = DIRECTION('',(0.,0.,1.)); +#19154 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19155 = ADVANCED_FACE('',(#19156),#19167,.T.); +#19156 = FACE_BOUND('',#19157,.T.); +#19157 = EDGE_LOOP('',(#19158,#19159,#19165,#19166)); +#19158 = ORIENTED_EDGE('',*,*,#19032,.F.); +#19159 = ORIENTED_EDGE('',*,*,#19160,.T.); +#19160 = EDGE_CURVE('',#19033,#18900,#19161,.T.); +#19161 = LINE('',#19162,#19163); +#19162 = CARTESIAN_POINT('',(5.32,0.12,-3.4)); +#19163 = VECTOR('',#19164,1.); +#19164 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19165 = ORIENTED_EDGE('',*,*,#18899,.T.); +#19166 = ORIENTED_EDGE('',*,*,#18955,.F.); +#19167 = PLANE('',#19168); +#19168 = AXIS2_PLACEMENT_3D('',#19169,#19170,#19171); +#19169 = CARTESIAN_POINT('',(5.32,0.235596257347,-3.301223703467)); +#19170 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#19171 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#19172 = ADVANCED_FACE('',(#19173),#19184,.F.); +#19173 = FACE_BOUND('',#19174,.F.); +#19174 = EDGE_LOOP('',(#19175,#19176,#19177,#19183)); +#19175 = ORIENTED_EDGE('',*,*,#19160,.T.); +#19176 = ORIENTED_EDGE('',*,*,#18909,.T.); +#19177 = ORIENTED_EDGE('',*,*,#19178,.F.); +#19178 = EDGE_CURVE('',#19041,#18910,#19179,.T.); +#19179 = LINE('',#19180,#19181); +#19180 = CARTESIAN_POINT('',(5.32,-0.12,-3.4)); +#19181 = VECTOR('',#19182,1.); +#19182 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19183 = ORIENTED_EDGE('',*,*,#19040,.F.); +#19184 = PLANE('',#19185); +#19185 = AXIS2_PLACEMENT_3D('',#19186,#19187,#19188); +#19186 = CARTESIAN_POINT('',(5.32,0.32,-3.4)); +#19187 = DIRECTION('',(0.,0.,1.)); +#19188 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19189 = ADVANCED_FACE('',(#19190),#19196,.T.); +#19190 = FACE_BOUND('',#19191,.F.); +#19191 = EDGE_LOOP('',(#19192,#19193,#19194,#19195)); +#19192 = ORIENTED_EDGE('',*,*,#19048,.F.); +#19193 = ORIENTED_EDGE('',*,*,#19178,.T.); +#19194 = ORIENTED_EDGE('',*,*,#18917,.T.); +#19195 = ORIENTED_EDGE('',*,*,#19015,.F.); +#19196 = PLANE('',#19197); +#19197 = AXIS2_PLACEMENT_3D('',#19198,#19199,#19200); +#19198 = CARTESIAN_POINT('',(5.32,-0.204403742653,-3.301223703467)); +#19199 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#19200 = DIRECTION('',(1.,-1.224646799148E-16,-5.515863360725E-29)); +#19201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#19205)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#19202,#19203,#19204)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#19202 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#19203 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#19204 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#19205 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#19202, + 'distance_accuracy_value','confusion accuracy'); +#19206 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#19207,#19209); +#19207 = ( REPRESENTATION_RELATIONSHIP('','',#15679,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#19208) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#19208 = ITEM_DEFINED_TRANSFORMATION('','',#11,#99); +#19209 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #19210); +#19210 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('22','J5','',#5,#15674,$); +#19211 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#15676)); +#19212 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#19213,#19215); +#19213 = ( REPRESENTATION_RELATIONSHIP('','',#15679,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#19214) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#19214 = ITEM_DEFINED_TRANSFORMATION('','',#11,#103); +#19215 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #19216); +#19216 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('23','J6','',#5,#15674,$); +#19217 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#19218,#19220); +#19218 = ( REPRESENTATION_RELATIONSHIP('','',#15679,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#19219) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#19219 = ITEM_DEFINED_TRANSFORMATION('','',#11,#107); +#19220 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #19221); +#19221 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('24','J7','',#5,#15674,$); +#19222 = SHAPE_DEFINITION_REPRESENTATION(#19223,#19229); +#19223 = PRODUCT_DEFINITION_SHAPE('','',#19224); +#19224 = PRODUCT_DEFINITION('design','',#19225,#19228); +#19225 = PRODUCT_DEFINITION_FORMATION('','',#19226); +#19226 = PRODUCT('PinHeader_1x04_P2.54mm_Vertical', + 'PinHeader_1x04_P2.54mm_Vertical','',(#19227)); +#19227 = PRODUCT_CONTEXT('',#2,'mechanical'); +#19228 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#19229 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#19230),#22010); +#19230 = MANIFOLD_SOLID_BREP('',#19231); +#19231 = CLOSED_SHELL('',(#19232,#19272,#19303,#19334,#19663,#19992, + #20009,#20026,#20043,#20060,#20077,#20094,#20111,#20128,#20145, + #20162,#20179,#20196,#20213,#20230,#20247,#20264,#20281,#20298, + #20315,#20332,#20349,#20366,#20378,#20409,#20433,#20457,#20474, + #20505,#20529,#20553,#20570,#20601,#20625,#20649,#20666,#20697, + #20721,#20745,#20762,#20793,#20817,#20841,#20858,#20889,#20913, + #20937,#20954,#20985,#21009,#21033,#21050,#21081,#21105,#21129, + #21146,#21177,#21201,#21225,#21242,#21273,#21297,#21321,#21338, + #21369,#21393,#21417,#21434,#21465,#21489,#21513,#21530,#21561, + #21585,#21609,#21626,#21657,#21681,#21705,#21722,#21753,#21777, + #21801,#21818,#21849,#21873,#21897,#21914,#21926,#21938,#21950, + #21962,#21974,#21986,#21998)); +#19232 = ADVANCED_FACE('',(#19233),#19267,.F.); +#19233 = FACE_BOUND('',#19234,.F.); +#19234 = EDGE_LOOP('',(#19235,#19245,#19253,#19261)); +#19235 = ORIENTED_EDGE('',*,*,#19236,.T.); +#19236 = EDGE_CURVE('',#19237,#19239,#19241,.T.); +#19237 = VERTEX_POINT('',#19238); +#19238 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#19239 = VERTEX_POINT('',#19240); +#19240 = CARTESIAN_POINT('',(-1.016,1.27,2.54)); +#19241 = LINE('',#19242,#19243); +#19242 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#19243 = VECTOR('',#19244,1.); +#19244 = DIRECTION('',(0.,0.,1.)); +#19245 = ORIENTED_EDGE('',*,*,#19246,.T.); +#19246 = EDGE_CURVE('',#19239,#19247,#19249,.T.); +#19247 = VERTEX_POINT('',#19248); +#19248 = CARTESIAN_POINT('',(-1.27,1.016,2.54)); +#19249 = LINE('',#19250,#19251); +#19250 = CARTESIAN_POINT('',(-1.016,1.27,2.54)); +#19251 = VECTOR('',#19252,1.); +#19252 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19253 = ORIENTED_EDGE('',*,*,#19254,.F.); +#19254 = EDGE_CURVE('',#19255,#19247,#19257,.T.); +#19255 = VERTEX_POINT('',#19256); +#19256 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#19257 = LINE('',#19258,#19259); +#19258 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#19259 = VECTOR('',#19260,1.); +#19260 = DIRECTION('',(0.,0.,1.)); +#19261 = ORIENTED_EDGE('',*,*,#19262,.F.); +#19262 = EDGE_CURVE('',#19237,#19255,#19263,.T.); +#19263 = LINE('',#19264,#19265); +#19264 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#19265 = VECTOR('',#19266,1.); +#19266 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19267 = PLANE('',#19268); +#19268 = AXIS2_PLACEMENT_3D('',#19269,#19270,#19271); +#19269 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#19270 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19271 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19272 = ADVANCED_FACE('',(#19273),#19298,.F.); +#19273 = FACE_BOUND('',#19274,.F.); +#19274 = EDGE_LOOP('',(#19275,#19285,#19291,#19292)); +#19275 = ORIENTED_EDGE('',*,*,#19276,.T.); +#19276 = EDGE_CURVE('',#19277,#19279,#19281,.T.); +#19277 = VERTEX_POINT('',#19278); +#19278 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#19279 = VERTEX_POINT('',#19280); +#19280 = CARTESIAN_POINT('',(1.016,1.27,2.54)); +#19281 = LINE('',#19282,#19283); +#19282 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#19283 = VECTOR('',#19284,1.); +#19284 = DIRECTION('',(0.,0.,1.)); +#19285 = ORIENTED_EDGE('',*,*,#19286,.T.); +#19286 = EDGE_CURVE('',#19279,#19239,#19287,.T.); +#19287 = LINE('',#19288,#19289); +#19288 = CARTESIAN_POINT('',(1.016,1.27,2.54)); +#19289 = VECTOR('',#19290,1.); +#19290 = DIRECTION('',(-1.,0.,0.)); +#19291 = ORIENTED_EDGE('',*,*,#19236,.F.); +#19292 = ORIENTED_EDGE('',*,*,#19293,.F.); +#19293 = EDGE_CURVE('',#19277,#19237,#19294,.T.); +#19294 = LINE('',#19295,#19296); +#19295 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#19296 = VECTOR('',#19297,1.); +#19297 = DIRECTION('',(-1.,0.,0.)); +#19298 = PLANE('',#19299); +#19299 = AXIS2_PLACEMENT_3D('',#19300,#19301,#19302); +#19300 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#19301 = DIRECTION('',(0.,-1.,0.)); +#19302 = DIRECTION('',(-1.,0.,0.)); +#19303 = ADVANCED_FACE('',(#19304),#19329,.F.); +#19304 = FACE_BOUND('',#19305,.F.); +#19305 = EDGE_LOOP('',(#19306,#19307,#19315,#19323)); +#19306 = ORIENTED_EDGE('',*,*,#19254,.T.); +#19307 = ORIENTED_EDGE('',*,*,#19308,.T.); +#19308 = EDGE_CURVE('',#19247,#19309,#19311,.T.); +#19309 = VERTEX_POINT('',#19310); +#19310 = CARTESIAN_POINT('',(-1.27,-1.016,2.54)); +#19311 = LINE('',#19312,#19313); +#19312 = CARTESIAN_POINT('',(-1.27,1.016,2.54)); +#19313 = VECTOR('',#19314,1.); +#19314 = DIRECTION('',(0.,-1.,0.)); +#19315 = ORIENTED_EDGE('',*,*,#19316,.F.); +#19316 = EDGE_CURVE('',#19317,#19309,#19319,.T.); +#19317 = VERTEX_POINT('',#19318); +#19318 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#19319 = LINE('',#19320,#19321); +#19320 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#19321 = VECTOR('',#19322,1.); +#19322 = DIRECTION('',(0.,0.,1.)); +#19323 = ORIENTED_EDGE('',*,*,#19324,.F.); +#19324 = EDGE_CURVE('',#19255,#19317,#19325,.T.); +#19325 = LINE('',#19326,#19327); +#19326 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#19327 = VECTOR('',#19328,1.); +#19328 = DIRECTION('',(0.,-1.,0.)); +#19329 = PLANE('',#19330); +#19330 = AXIS2_PLACEMENT_3D('',#19331,#19332,#19333); +#19331 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#19332 = DIRECTION('',(1.,0.,0.)); +#19333 = DIRECTION('',(0.,-1.,0.)); +#19334 = ADVANCED_FACE('',(#19335,#19522,#19556,#19590,#19624),#19658, + .F.); +#19335 = FACE_BOUND('',#19336,.F.); +#19336 = EDGE_LOOP('',(#19337,#19338,#19339,#19347,#19355,#19363,#19371, + #19379,#19387,#19395,#19403,#19411,#19419,#19427,#19435,#19443, + #19451,#19459,#19467,#19475,#19483,#19491,#19499,#19507,#19515, + #19521)); +#19337 = ORIENTED_EDGE('',*,*,#19262,.T.); +#19338 = ORIENTED_EDGE('',*,*,#19324,.T.); +#19339 = ORIENTED_EDGE('',*,*,#19340,.T.); +#19340 = EDGE_CURVE('',#19317,#19341,#19343,.T.); +#19341 = VERTEX_POINT('',#19342); +#19342 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#19343 = LINE('',#19344,#19345); +#19344 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#19345 = VECTOR('',#19346,1.); +#19346 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19347 = ORIENTED_EDGE('',*,*,#19348,.T.); +#19348 = EDGE_CURVE('',#19341,#19349,#19351,.T.); +#19349 = VERTEX_POINT('',#19350); +#19350 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#19351 = LINE('',#19352,#19353); +#19352 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#19353 = VECTOR('',#19354,1.); +#19354 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19355 = ORIENTED_EDGE('',*,*,#19356,.T.); +#19356 = EDGE_CURVE('',#19349,#19357,#19359,.T.); +#19357 = VERTEX_POINT('',#19358); +#19358 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#19359 = LINE('',#19360,#19361); +#19360 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#19361 = VECTOR('',#19362,1.); +#19362 = DIRECTION('',(0.,-1.,0.)); +#19363 = ORIENTED_EDGE('',*,*,#19364,.T.); +#19364 = EDGE_CURVE('',#19357,#19365,#19367,.T.); +#19365 = VERTEX_POINT('',#19366); +#19366 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#19367 = LINE('',#19368,#19369); +#19368 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#19369 = VECTOR('',#19370,1.); +#19370 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19371 = ORIENTED_EDGE('',*,*,#19372,.T.); +#19372 = EDGE_CURVE('',#19365,#19373,#19375,.T.); +#19373 = VERTEX_POINT('',#19374); +#19374 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#19375 = LINE('',#19376,#19377); +#19376 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#19377 = VECTOR('',#19378,1.); +#19378 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19379 = ORIENTED_EDGE('',*,*,#19380,.T.); +#19380 = EDGE_CURVE('',#19373,#19381,#19383,.T.); +#19381 = VERTEX_POINT('',#19382); +#19382 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#19383 = LINE('',#19384,#19385); +#19384 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#19385 = VECTOR('',#19386,1.); +#19386 = DIRECTION('',(0.,-1.,0.)); +#19387 = ORIENTED_EDGE('',*,*,#19388,.T.); +#19388 = EDGE_CURVE('',#19381,#19389,#19391,.T.); +#19389 = VERTEX_POINT('',#19390); +#19390 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#19391 = LINE('',#19392,#19393); +#19392 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#19393 = VECTOR('',#19394,1.); +#19394 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19395 = ORIENTED_EDGE('',*,*,#19396,.T.); +#19396 = EDGE_CURVE('',#19389,#19397,#19399,.T.); +#19397 = VERTEX_POINT('',#19398); +#19398 = CARTESIAN_POINT('',(-1.27,-6.604,0.)); +#19399 = LINE('',#19400,#19401); +#19400 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#19401 = VECTOR('',#19402,1.); +#19402 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19403 = ORIENTED_EDGE('',*,*,#19404,.T.); +#19404 = EDGE_CURVE('',#19397,#19405,#19407,.T.); +#19405 = VERTEX_POINT('',#19406); +#19406 = CARTESIAN_POINT('',(-1.27,-8.636,0.)); +#19407 = LINE('',#19408,#19409); +#19408 = CARTESIAN_POINT('',(-1.27,-6.604,0.)); +#19409 = VECTOR('',#19410,1.); +#19410 = DIRECTION('',(0.,-1.,0.)); +#19411 = ORIENTED_EDGE('',*,*,#19412,.T.); +#19412 = EDGE_CURVE('',#19405,#19413,#19415,.T.); +#19413 = VERTEX_POINT('',#19414); +#19414 = CARTESIAN_POINT('',(-1.016,-8.89,0.)); +#19415 = LINE('',#19416,#19417); +#19416 = CARTESIAN_POINT('',(-1.27,-8.636,0.)); +#19417 = VECTOR('',#19418,1.); +#19418 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19419 = ORIENTED_EDGE('',*,*,#19420,.T.); +#19420 = EDGE_CURVE('',#19413,#19421,#19423,.T.); +#19421 = VERTEX_POINT('',#19422); +#19422 = CARTESIAN_POINT('',(1.016,-8.89,0.)); +#19423 = LINE('',#19424,#19425); +#19424 = CARTESIAN_POINT('',(-1.016,-8.89,0.)); +#19425 = VECTOR('',#19426,1.); +#19426 = DIRECTION('',(1.,0.,0.)); +#19427 = ORIENTED_EDGE('',*,*,#19428,.T.); +#19428 = EDGE_CURVE('',#19421,#19429,#19431,.T.); +#19429 = VERTEX_POINT('',#19430); +#19430 = CARTESIAN_POINT('',(1.27,-8.636,0.)); +#19431 = LINE('',#19432,#19433); +#19432 = CARTESIAN_POINT('',(1.016,-8.89,0.)); +#19433 = VECTOR('',#19434,1.); +#19434 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#19435 = ORIENTED_EDGE('',*,*,#19436,.T.); +#19436 = EDGE_CURVE('',#19429,#19437,#19439,.T.); +#19437 = VERTEX_POINT('',#19438); +#19438 = CARTESIAN_POINT('',(1.27,-6.604,0.)); +#19439 = LINE('',#19440,#19441); +#19440 = CARTESIAN_POINT('',(1.27,-8.636,0.)); +#19441 = VECTOR('',#19442,1.); +#19442 = DIRECTION('',(0.,1.,0.)); +#19443 = ORIENTED_EDGE('',*,*,#19444,.T.); +#19444 = EDGE_CURVE('',#19437,#19445,#19447,.T.); +#19445 = VERTEX_POINT('',#19446); +#19446 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#19447 = LINE('',#19448,#19449); +#19448 = CARTESIAN_POINT('',(1.27,-6.604,0.)); +#19449 = VECTOR('',#19450,1.); +#19450 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19451 = ORIENTED_EDGE('',*,*,#19452,.T.); +#19452 = EDGE_CURVE('',#19445,#19453,#19455,.T.); +#19453 = VERTEX_POINT('',#19454); +#19454 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#19455 = LINE('',#19456,#19457); +#19456 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#19457 = VECTOR('',#19458,1.); +#19458 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#19459 = ORIENTED_EDGE('',*,*,#19460,.T.); +#19460 = EDGE_CURVE('',#19453,#19461,#19463,.T.); +#19461 = VERTEX_POINT('',#19462); +#19462 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#19463 = LINE('',#19464,#19465); +#19464 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#19465 = VECTOR('',#19466,1.); +#19466 = DIRECTION('',(0.,1.,0.)); +#19467 = ORIENTED_EDGE('',*,*,#19468,.T.); +#19468 = EDGE_CURVE('',#19461,#19469,#19471,.T.); +#19469 = VERTEX_POINT('',#19470); +#19470 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#19471 = LINE('',#19472,#19473); +#19472 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#19473 = VECTOR('',#19474,1.); +#19474 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19475 = ORIENTED_EDGE('',*,*,#19476,.T.); +#19476 = EDGE_CURVE('',#19469,#19477,#19479,.T.); +#19477 = VERTEX_POINT('',#19478); +#19478 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#19479 = LINE('',#19480,#19481); +#19480 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#19481 = VECTOR('',#19482,1.); +#19482 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#19483 = ORIENTED_EDGE('',*,*,#19484,.T.); +#19484 = EDGE_CURVE('',#19477,#19485,#19487,.T.); +#19485 = VERTEX_POINT('',#19486); +#19486 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#19487 = LINE('',#19488,#19489); +#19488 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#19489 = VECTOR('',#19490,1.); +#19490 = DIRECTION('',(0.,1.,0.)); +#19491 = ORIENTED_EDGE('',*,*,#19492,.T.); +#19492 = EDGE_CURVE('',#19485,#19493,#19495,.T.); +#19493 = VERTEX_POINT('',#19494); +#19494 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#19495 = LINE('',#19496,#19497); +#19496 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#19497 = VECTOR('',#19498,1.); +#19498 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19499 = ORIENTED_EDGE('',*,*,#19500,.T.); +#19500 = EDGE_CURVE('',#19493,#19501,#19503,.T.); +#19501 = VERTEX_POINT('',#19502); +#19502 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#19503 = LINE('',#19504,#19505); +#19504 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#19505 = VECTOR('',#19506,1.); +#19506 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#19507 = ORIENTED_EDGE('',*,*,#19508,.T.); +#19508 = EDGE_CURVE('',#19501,#19509,#19511,.T.); +#19509 = VERTEX_POINT('',#19510); +#19510 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#19511 = LINE('',#19512,#19513); +#19512 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#19513 = VECTOR('',#19514,1.); +#19514 = DIRECTION('',(0.,1.,0.)); +#19515 = ORIENTED_EDGE('',*,*,#19516,.T.); +#19516 = EDGE_CURVE('',#19509,#19277,#19517,.T.); +#19517 = LINE('',#19518,#19519); +#19518 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#19519 = VECTOR('',#19520,1.); +#19520 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19521 = ORIENTED_EDGE('',*,*,#19293,.T.); +#19522 = FACE_BOUND('',#19523,.F.); +#19523 = EDGE_LOOP('',(#19524,#19534,#19542,#19550)); +#19524 = ORIENTED_EDGE('',*,*,#19525,.F.); +#19525 = EDGE_CURVE('',#19526,#19528,#19530,.T.); +#19526 = VERTEX_POINT('',#19527); +#19527 = CARTESIAN_POINT('',(0.32,-4.76,0.)); +#19528 = VERTEX_POINT('',#19529); +#19529 = CARTESIAN_POINT('',(-0.32,-4.76,0.)); +#19530 = LINE('',#19531,#19532); +#19531 = CARTESIAN_POINT('',(-0.16,-4.76,0.)); +#19532 = VECTOR('',#19533,1.); +#19533 = DIRECTION('',(-1.,0.,0.)); +#19534 = ORIENTED_EDGE('',*,*,#19535,.F.); +#19535 = EDGE_CURVE('',#19536,#19526,#19538,.T.); +#19536 = VERTEX_POINT('',#19537); +#19537 = CARTESIAN_POINT('',(0.32,-5.4,0.)); +#19538 = LINE('',#19539,#19540); +#19539 = CARTESIAN_POINT('',(0.32,-4.605,0.)); +#19540 = VECTOR('',#19541,1.); +#19541 = DIRECTION('',(0.,1.,0.)); +#19542 = ORIENTED_EDGE('',*,*,#19543,.T.); +#19543 = EDGE_CURVE('',#19536,#19544,#19546,.T.); +#19544 = VERTEX_POINT('',#19545); +#19545 = CARTESIAN_POINT('',(-0.32,-5.4,0.)); +#19546 = LINE('',#19547,#19548); +#19547 = CARTESIAN_POINT('',(-0.16,-5.4,0.)); +#19548 = VECTOR('',#19549,1.); +#19549 = DIRECTION('',(-1.,0.,0.)); +#19550 = ORIENTED_EDGE('',*,*,#19551,.T.); +#19551 = EDGE_CURVE('',#19544,#19528,#19552,.T.); +#19552 = LINE('',#19553,#19554); +#19553 = CARTESIAN_POINT('',(-0.32,-4.605,0.)); +#19554 = VECTOR('',#19555,1.); +#19555 = DIRECTION('',(0.,1.,0.)); +#19556 = FACE_BOUND('',#19557,.F.); +#19557 = EDGE_LOOP('',(#19558,#19568,#19576,#19584)); +#19558 = ORIENTED_EDGE('',*,*,#19559,.F.); +#19559 = EDGE_CURVE('',#19560,#19562,#19564,.T.); +#19560 = VERTEX_POINT('',#19561); +#19561 = CARTESIAN_POINT('',(0.32,-7.94,0.)); +#19562 = VERTEX_POINT('',#19563); +#19563 = CARTESIAN_POINT('',(0.32,-7.3,0.)); +#19564 = LINE('',#19565,#19566); +#19565 = CARTESIAN_POINT('',(0.32,-5.875,0.)); +#19566 = VECTOR('',#19567,1.); +#19567 = DIRECTION('',(0.,1.,0.)); +#19568 = ORIENTED_EDGE('',*,*,#19569,.T.); +#19569 = EDGE_CURVE('',#19560,#19570,#19572,.T.); +#19570 = VERTEX_POINT('',#19571); +#19571 = CARTESIAN_POINT('',(-0.32,-7.94,0.)); +#19572 = LINE('',#19573,#19574); +#19573 = CARTESIAN_POINT('',(-0.16,-7.94,0.)); +#19574 = VECTOR('',#19575,1.); +#19575 = DIRECTION('',(-1.,0.,0.)); +#19576 = ORIENTED_EDGE('',*,*,#19577,.T.); +#19577 = EDGE_CURVE('',#19570,#19578,#19580,.T.); +#19578 = VERTEX_POINT('',#19579); +#19579 = CARTESIAN_POINT('',(-0.32,-7.3,0.)); +#19580 = LINE('',#19581,#19582); +#19581 = CARTESIAN_POINT('',(-0.32,-5.875,0.)); +#19582 = VECTOR('',#19583,1.); +#19583 = DIRECTION('',(0.,1.,0.)); +#19584 = ORIENTED_EDGE('',*,*,#19585,.F.); +#19585 = EDGE_CURVE('',#19562,#19578,#19586,.T.); +#19586 = LINE('',#19587,#19588); +#19587 = CARTESIAN_POINT('',(-0.16,-7.3,0.)); +#19588 = VECTOR('',#19589,1.); +#19589 = DIRECTION('',(-1.,0.,0.)); +#19590 = FACE_BOUND('',#19591,.F.); +#19591 = EDGE_LOOP('',(#19592,#19602,#19610,#19618)); +#19592 = ORIENTED_EDGE('',*,*,#19593,.F.); +#19593 = EDGE_CURVE('',#19594,#19596,#19598,.T.); +#19594 = VERTEX_POINT('',#19595); +#19595 = CARTESIAN_POINT('',(0.32,-0.32,0.)); +#19596 = VERTEX_POINT('',#19597); +#19597 = CARTESIAN_POINT('',(0.32,0.32,0.)); +#19598 = LINE('',#19599,#19600); +#19599 = CARTESIAN_POINT('',(0.32,-2.065,0.)); +#19600 = VECTOR('',#19601,1.); +#19601 = DIRECTION('',(0.,1.,0.)); +#19602 = ORIENTED_EDGE('',*,*,#19603,.T.); +#19603 = EDGE_CURVE('',#19594,#19604,#19606,.T.); +#19604 = VERTEX_POINT('',#19605); +#19605 = CARTESIAN_POINT('',(-0.32,-0.32,0.)); +#19606 = LINE('',#19607,#19608); +#19607 = CARTESIAN_POINT('',(-0.16,-0.32,0.)); +#19608 = VECTOR('',#19609,1.); +#19609 = DIRECTION('',(-1.,0.,0.)); +#19610 = ORIENTED_EDGE('',*,*,#19611,.T.); +#19611 = EDGE_CURVE('',#19604,#19612,#19614,.T.); +#19612 = VERTEX_POINT('',#19613); +#19613 = CARTESIAN_POINT('',(-0.32,0.32,0.)); +#19614 = LINE('',#19615,#19616); +#19615 = CARTESIAN_POINT('',(-0.32,-2.065,0.)); +#19616 = VECTOR('',#19617,1.); +#19617 = DIRECTION('',(0.,1.,0.)); +#19618 = ORIENTED_EDGE('',*,*,#19619,.F.); +#19619 = EDGE_CURVE('',#19596,#19612,#19620,.T.); +#19620 = LINE('',#19621,#19622); +#19621 = CARTESIAN_POINT('',(-0.16,0.32,0.)); +#19622 = VECTOR('',#19623,1.); +#19623 = DIRECTION('',(-1.,0.,0.)); +#19624 = FACE_BOUND('',#19625,.F.); +#19625 = EDGE_LOOP('',(#19626,#19636,#19644,#19652)); +#19626 = ORIENTED_EDGE('',*,*,#19627,.F.); +#19627 = EDGE_CURVE('',#19628,#19630,#19632,.T.); +#19628 = VERTEX_POINT('',#19629); +#19629 = CARTESIAN_POINT('',(0.32,-2.22,0.)); +#19630 = VERTEX_POINT('',#19631); +#19631 = CARTESIAN_POINT('',(-0.32,-2.22,0.)); +#19632 = LINE('',#19633,#19634); +#19633 = CARTESIAN_POINT('',(-0.16,-2.22,0.)); +#19634 = VECTOR('',#19635,1.); +#19635 = DIRECTION('',(-1.,0.,0.)); +#19636 = ORIENTED_EDGE('',*,*,#19637,.F.); +#19637 = EDGE_CURVE('',#19638,#19628,#19640,.T.); +#19638 = VERTEX_POINT('',#19639); +#19639 = CARTESIAN_POINT('',(0.32,-2.86,0.)); +#19640 = LINE('',#19641,#19642); +#19641 = CARTESIAN_POINT('',(0.32,-3.335,0.)); +#19642 = VECTOR('',#19643,1.); +#19643 = DIRECTION('',(0.,1.,0.)); +#19644 = ORIENTED_EDGE('',*,*,#19645,.T.); +#19645 = EDGE_CURVE('',#19638,#19646,#19648,.T.); +#19646 = VERTEX_POINT('',#19647); +#19647 = CARTESIAN_POINT('',(-0.32,-2.86,0.)); +#19648 = LINE('',#19649,#19650); +#19649 = CARTESIAN_POINT('',(-0.16,-2.86,0.)); +#19650 = VECTOR('',#19651,1.); +#19651 = DIRECTION('',(-1.,0.,0.)); +#19652 = ORIENTED_EDGE('',*,*,#19653,.T.); +#19653 = EDGE_CURVE('',#19646,#19630,#19654,.T.); +#19654 = LINE('',#19655,#19656); +#19655 = CARTESIAN_POINT('',(-0.32,-3.335,0.)); +#19656 = VECTOR('',#19657,1.); +#19657 = DIRECTION('',(0.,1.,0.)); +#19658 = PLANE('',#19659); +#19659 = AXIS2_PLACEMENT_3D('',#19660,#19661,#19662); +#19660 = CARTESIAN_POINT('',(4.259053689278E-17,-3.81,0.)); +#19661 = DIRECTION('',(0.,0.,1.)); +#19662 = DIRECTION('',(1.,0.,-0.)); +#19663 = ADVANCED_FACE('',(#19664,#19851,#19885,#19919,#19953),#19987, + .T.); +#19664 = FACE_BOUND('',#19665,.T.); +#19665 = EDGE_LOOP('',(#19666,#19667,#19668,#19676,#19684,#19692,#19700, + #19708,#19716,#19724,#19732,#19740,#19748,#19756,#19764,#19772, + #19780,#19788,#19796,#19804,#19812,#19820,#19828,#19836,#19844, + #19850)); +#19666 = ORIENTED_EDGE('',*,*,#19246,.T.); +#19667 = ORIENTED_EDGE('',*,*,#19308,.T.); +#19668 = ORIENTED_EDGE('',*,*,#19669,.T.); +#19669 = EDGE_CURVE('',#19309,#19670,#19672,.T.); +#19670 = VERTEX_POINT('',#19671); +#19671 = CARTESIAN_POINT('',(-1.016,-1.27,2.54)); +#19672 = LINE('',#19673,#19674); +#19673 = CARTESIAN_POINT('',(-1.27,-1.016,2.54)); +#19674 = VECTOR('',#19675,1.); +#19675 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19676 = ORIENTED_EDGE('',*,*,#19677,.T.); +#19677 = EDGE_CURVE('',#19670,#19678,#19680,.T.); +#19678 = VERTEX_POINT('',#19679); +#19679 = CARTESIAN_POINT('',(-1.27,-1.524,2.54)); +#19680 = LINE('',#19681,#19682); +#19681 = CARTESIAN_POINT('',(-1.016,-1.27,2.54)); +#19682 = VECTOR('',#19683,1.); +#19683 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19684 = ORIENTED_EDGE('',*,*,#19685,.T.); +#19685 = EDGE_CURVE('',#19678,#19686,#19688,.T.); +#19686 = VERTEX_POINT('',#19687); +#19687 = CARTESIAN_POINT('',(-1.27,-3.556,2.54)); +#19688 = LINE('',#19689,#19690); +#19689 = CARTESIAN_POINT('',(-1.27,-1.524,2.54)); +#19690 = VECTOR('',#19691,1.); +#19691 = DIRECTION('',(0.,-1.,0.)); +#19692 = ORIENTED_EDGE('',*,*,#19693,.T.); +#19693 = EDGE_CURVE('',#19686,#19694,#19696,.T.); +#19694 = VERTEX_POINT('',#19695); +#19695 = CARTESIAN_POINT('',(-1.016,-3.81,2.54)); +#19696 = LINE('',#19697,#19698); +#19697 = CARTESIAN_POINT('',(-1.27,-3.556,2.54)); +#19698 = VECTOR('',#19699,1.); +#19699 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19700 = ORIENTED_EDGE('',*,*,#19701,.T.); +#19701 = EDGE_CURVE('',#19694,#19702,#19704,.T.); +#19702 = VERTEX_POINT('',#19703); +#19703 = CARTESIAN_POINT('',(-1.27,-4.064,2.54)); +#19704 = LINE('',#19705,#19706); +#19705 = CARTESIAN_POINT('',(-1.016,-3.81,2.54)); +#19706 = VECTOR('',#19707,1.); +#19707 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19708 = ORIENTED_EDGE('',*,*,#19709,.T.); +#19709 = EDGE_CURVE('',#19702,#19710,#19712,.T.); +#19710 = VERTEX_POINT('',#19711); +#19711 = CARTESIAN_POINT('',(-1.27,-6.096,2.54)); +#19712 = LINE('',#19713,#19714); +#19713 = CARTESIAN_POINT('',(-1.27,-4.064,2.54)); +#19714 = VECTOR('',#19715,1.); +#19715 = DIRECTION('',(0.,-1.,0.)); +#19716 = ORIENTED_EDGE('',*,*,#19717,.T.); +#19717 = EDGE_CURVE('',#19710,#19718,#19720,.T.); +#19718 = VERTEX_POINT('',#19719); +#19719 = CARTESIAN_POINT('',(-1.016,-6.35,2.54)); +#19720 = LINE('',#19721,#19722); +#19721 = CARTESIAN_POINT('',(-1.27,-6.096,2.54)); +#19722 = VECTOR('',#19723,1.); +#19723 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19724 = ORIENTED_EDGE('',*,*,#19725,.T.); +#19725 = EDGE_CURVE('',#19718,#19726,#19728,.T.); +#19726 = VERTEX_POINT('',#19727); +#19727 = CARTESIAN_POINT('',(-1.27,-6.604,2.54)); +#19728 = LINE('',#19729,#19730); +#19729 = CARTESIAN_POINT('',(-1.016,-6.35,2.54)); +#19730 = VECTOR('',#19731,1.); +#19731 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#19732 = ORIENTED_EDGE('',*,*,#19733,.T.); +#19733 = EDGE_CURVE('',#19726,#19734,#19736,.T.); +#19734 = VERTEX_POINT('',#19735); +#19735 = CARTESIAN_POINT('',(-1.27,-8.636,2.54)); +#19736 = LINE('',#19737,#19738); +#19737 = CARTESIAN_POINT('',(-1.27,-6.604,2.54)); +#19738 = VECTOR('',#19739,1.); +#19739 = DIRECTION('',(0.,-1.,0.)); +#19740 = ORIENTED_EDGE('',*,*,#19741,.T.); +#19741 = EDGE_CURVE('',#19734,#19742,#19744,.T.); +#19742 = VERTEX_POINT('',#19743); +#19743 = CARTESIAN_POINT('',(-1.016,-8.89,2.54)); +#19744 = LINE('',#19745,#19746); +#19745 = CARTESIAN_POINT('',(-1.27,-8.636,2.54)); +#19746 = VECTOR('',#19747,1.); +#19747 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#19748 = ORIENTED_EDGE('',*,*,#19749,.T.); +#19749 = EDGE_CURVE('',#19742,#19750,#19752,.T.); +#19750 = VERTEX_POINT('',#19751); +#19751 = CARTESIAN_POINT('',(1.016,-8.89,2.54)); +#19752 = LINE('',#19753,#19754); +#19753 = CARTESIAN_POINT('',(-1.016,-8.89,2.54)); +#19754 = VECTOR('',#19755,1.); +#19755 = DIRECTION('',(1.,0.,0.)); +#19756 = ORIENTED_EDGE('',*,*,#19757,.T.); +#19757 = EDGE_CURVE('',#19750,#19758,#19760,.T.); +#19758 = VERTEX_POINT('',#19759); +#19759 = CARTESIAN_POINT('',(1.27,-8.636,2.54)); +#19760 = LINE('',#19761,#19762); +#19761 = CARTESIAN_POINT('',(1.016,-8.89,2.54)); +#19762 = VECTOR('',#19763,1.); +#19763 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#19764 = ORIENTED_EDGE('',*,*,#19765,.T.); +#19765 = EDGE_CURVE('',#19758,#19766,#19768,.T.); +#19766 = VERTEX_POINT('',#19767); +#19767 = CARTESIAN_POINT('',(1.27,-6.604,2.54)); +#19768 = LINE('',#19769,#19770); +#19769 = CARTESIAN_POINT('',(1.27,-8.636,2.54)); +#19770 = VECTOR('',#19771,1.); +#19771 = DIRECTION('',(0.,1.,0.)); +#19772 = ORIENTED_EDGE('',*,*,#19773,.T.); +#19773 = EDGE_CURVE('',#19766,#19774,#19776,.T.); +#19774 = VERTEX_POINT('',#19775); +#19775 = CARTESIAN_POINT('',(1.016,-6.35,2.54)); +#19776 = LINE('',#19777,#19778); +#19777 = CARTESIAN_POINT('',(1.27,-6.604,2.54)); +#19778 = VECTOR('',#19779,1.); +#19779 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19780 = ORIENTED_EDGE('',*,*,#19781,.T.); +#19781 = EDGE_CURVE('',#19774,#19782,#19784,.T.); +#19782 = VERTEX_POINT('',#19783); +#19783 = CARTESIAN_POINT('',(1.27,-6.096,2.54)); +#19784 = LINE('',#19785,#19786); +#19785 = CARTESIAN_POINT('',(1.016,-6.35,2.54)); +#19786 = VECTOR('',#19787,1.); +#19787 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#19788 = ORIENTED_EDGE('',*,*,#19789,.T.); +#19789 = EDGE_CURVE('',#19782,#19790,#19792,.T.); +#19790 = VERTEX_POINT('',#19791); +#19791 = CARTESIAN_POINT('',(1.27,-4.064,2.54)); +#19792 = LINE('',#19793,#19794); +#19793 = CARTESIAN_POINT('',(1.27,-6.096,2.54)); +#19794 = VECTOR('',#19795,1.); +#19795 = DIRECTION('',(0.,1.,0.)); +#19796 = ORIENTED_EDGE('',*,*,#19797,.T.); +#19797 = EDGE_CURVE('',#19790,#19798,#19800,.T.); +#19798 = VERTEX_POINT('',#19799); +#19799 = CARTESIAN_POINT('',(1.016,-3.81,2.54)); +#19800 = LINE('',#19801,#19802); +#19801 = CARTESIAN_POINT('',(1.27,-4.064,2.54)); +#19802 = VECTOR('',#19803,1.); +#19803 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19804 = ORIENTED_EDGE('',*,*,#19805,.T.); +#19805 = EDGE_CURVE('',#19798,#19806,#19808,.T.); +#19806 = VERTEX_POINT('',#19807); +#19807 = CARTESIAN_POINT('',(1.27,-3.556,2.54)); +#19808 = LINE('',#19809,#19810); +#19809 = CARTESIAN_POINT('',(1.016,-3.81,2.54)); +#19810 = VECTOR('',#19811,1.); +#19811 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#19812 = ORIENTED_EDGE('',*,*,#19813,.T.); +#19813 = EDGE_CURVE('',#19806,#19814,#19816,.T.); +#19814 = VERTEX_POINT('',#19815); +#19815 = CARTESIAN_POINT('',(1.27,-1.524,2.54)); +#19816 = LINE('',#19817,#19818); +#19817 = CARTESIAN_POINT('',(1.27,-3.556,2.54)); +#19818 = VECTOR('',#19819,1.); +#19819 = DIRECTION('',(0.,1.,0.)); +#19820 = ORIENTED_EDGE('',*,*,#19821,.T.); +#19821 = EDGE_CURVE('',#19814,#19822,#19824,.T.); +#19822 = VERTEX_POINT('',#19823); +#19823 = CARTESIAN_POINT('',(1.016,-1.27,2.54)); +#19824 = LINE('',#19825,#19826); +#19825 = CARTESIAN_POINT('',(1.27,-1.524,2.54)); +#19826 = VECTOR('',#19827,1.); +#19827 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19828 = ORIENTED_EDGE('',*,*,#19829,.T.); +#19829 = EDGE_CURVE('',#19822,#19830,#19832,.T.); +#19830 = VERTEX_POINT('',#19831); +#19831 = CARTESIAN_POINT('',(1.27,-1.016,2.54)); +#19832 = LINE('',#19833,#19834); +#19833 = CARTESIAN_POINT('',(1.016,-1.27,2.54)); +#19834 = VECTOR('',#19835,1.); +#19835 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#19836 = ORIENTED_EDGE('',*,*,#19837,.T.); +#19837 = EDGE_CURVE('',#19830,#19838,#19840,.T.); +#19838 = VERTEX_POINT('',#19839); +#19839 = CARTESIAN_POINT('',(1.27,1.016,2.54)); +#19840 = LINE('',#19841,#19842); +#19841 = CARTESIAN_POINT('',(1.27,-1.016,2.54)); +#19842 = VECTOR('',#19843,1.); +#19843 = DIRECTION('',(0.,1.,0.)); +#19844 = ORIENTED_EDGE('',*,*,#19845,.T.); +#19845 = EDGE_CURVE('',#19838,#19279,#19846,.T.); +#19846 = LINE('',#19847,#19848); +#19847 = CARTESIAN_POINT('',(1.27,1.016,2.54)); +#19848 = VECTOR('',#19849,1.); +#19849 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#19850 = ORIENTED_EDGE('',*,*,#19286,.T.); +#19851 = FACE_BOUND('',#19852,.T.); +#19852 = EDGE_LOOP('',(#19853,#19863,#19871,#19879)); +#19853 = ORIENTED_EDGE('',*,*,#19854,.F.); +#19854 = EDGE_CURVE('',#19855,#19857,#19859,.T.); +#19855 = VERTEX_POINT('',#19856); +#19856 = CARTESIAN_POINT('',(0.32,-4.76,2.54)); +#19857 = VERTEX_POINT('',#19858); +#19858 = CARTESIAN_POINT('',(-0.32,-4.76,2.54)); +#19859 = LINE('',#19860,#19861); +#19860 = CARTESIAN_POINT('',(-0.16,-4.76,2.54)); +#19861 = VECTOR('',#19862,1.); +#19862 = DIRECTION('',(-1.,0.,0.)); +#19863 = ORIENTED_EDGE('',*,*,#19864,.F.); +#19864 = EDGE_CURVE('',#19865,#19855,#19867,.T.); +#19865 = VERTEX_POINT('',#19866); +#19866 = CARTESIAN_POINT('',(0.32,-5.4,2.54)); +#19867 = LINE('',#19868,#19869); +#19868 = CARTESIAN_POINT('',(0.32,-4.605,2.54)); +#19869 = VECTOR('',#19870,1.); +#19870 = DIRECTION('',(0.,1.,0.)); +#19871 = ORIENTED_EDGE('',*,*,#19872,.T.); +#19872 = EDGE_CURVE('',#19865,#19873,#19875,.T.); +#19873 = VERTEX_POINT('',#19874); +#19874 = CARTESIAN_POINT('',(-0.32,-5.4,2.54)); +#19875 = LINE('',#19876,#19877); +#19876 = CARTESIAN_POINT('',(-0.16,-5.4,2.54)); +#19877 = VECTOR('',#19878,1.); +#19878 = DIRECTION('',(-1.,0.,0.)); +#19879 = ORIENTED_EDGE('',*,*,#19880,.T.); +#19880 = EDGE_CURVE('',#19873,#19857,#19881,.T.); +#19881 = LINE('',#19882,#19883); +#19882 = CARTESIAN_POINT('',(-0.32,-4.605,2.54)); +#19883 = VECTOR('',#19884,1.); +#19884 = DIRECTION('',(0.,1.,0.)); +#19885 = FACE_BOUND('',#19886,.T.); +#19886 = EDGE_LOOP('',(#19887,#19897,#19905,#19913)); +#19887 = ORIENTED_EDGE('',*,*,#19888,.F.); +#19888 = EDGE_CURVE('',#19889,#19891,#19893,.T.); +#19889 = VERTEX_POINT('',#19890); +#19890 = CARTESIAN_POINT('',(0.32,-7.94,2.54)); +#19891 = VERTEX_POINT('',#19892); +#19892 = CARTESIAN_POINT('',(0.32,-7.3,2.54)); +#19893 = LINE('',#19894,#19895); +#19894 = CARTESIAN_POINT('',(0.32,-5.875,2.54)); +#19895 = VECTOR('',#19896,1.); +#19896 = DIRECTION('',(0.,1.,0.)); +#19897 = ORIENTED_EDGE('',*,*,#19898,.T.); +#19898 = EDGE_CURVE('',#19889,#19899,#19901,.T.); +#19899 = VERTEX_POINT('',#19900); +#19900 = CARTESIAN_POINT('',(-0.32,-7.94,2.54)); +#19901 = LINE('',#19902,#19903); +#19902 = CARTESIAN_POINT('',(-0.16,-7.94,2.54)); +#19903 = VECTOR('',#19904,1.); +#19904 = DIRECTION('',(-1.,0.,0.)); +#19905 = ORIENTED_EDGE('',*,*,#19906,.T.); +#19906 = EDGE_CURVE('',#19899,#19907,#19909,.T.); +#19907 = VERTEX_POINT('',#19908); +#19908 = CARTESIAN_POINT('',(-0.32,-7.3,2.54)); +#19909 = LINE('',#19910,#19911); +#19910 = CARTESIAN_POINT('',(-0.32,-5.875,2.54)); +#19911 = VECTOR('',#19912,1.); +#19912 = DIRECTION('',(0.,1.,0.)); +#19913 = ORIENTED_EDGE('',*,*,#19914,.F.); +#19914 = EDGE_CURVE('',#19891,#19907,#19915,.T.); +#19915 = LINE('',#19916,#19917); +#19916 = CARTESIAN_POINT('',(-0.16,-7.3,2.54)); +#19917 = VECTOR('',#19918,1.); +#19918 = DIRECTION('',(-1.,0.,0.)); +#19919 = FACE_BOUND('',#19920,.T.); +#19920 = EDGE_LOOP('',(#19921,#19931,#19939,#19947)); +#19921 = ORIENTED_EDGE('',*,*,#19922,.F.); +#19922 = EDGE_CURVE('',#19923,#19925,#19927,.T.); +#19923 = VERTEX_POINT('',#19924); +#19924 = CARTESIAN_POINT('',(0.32,-0.32,2.54)); +#19925 = VERTEX_POINT('',#19926); +#19926 = CARTESIAN_POINT('',(0.32,0.32,2.54)); +#19927 = LINE('',#19928,#19929); +#19928 = CARTESIAN_POINT('',(0.32,-2.065,2.54)); +#19929 = VECTOR('',#19930,1.); +#19930 = DIRECTION('',(0.,1.,0.)); +#19931 = ORIENTED_EDGE('',*,*,#19932,.T.); +#19932 = EDGE_CURVE('',#19923,#19933,#19935,.T.); +#19933 = VERTEX_POINT('',#19934); +#19934 = CARTESIAN_POINT('',(-0.32,-0.32,2.54)); +#19935 = LINE('',#19936,#19937); +#19936 = CARTESIAN_POINT('',(-0.16,-0.32,2.54)); +#19937 = VECTOR('',#19938,1.); +#19938 = DIRECTION('',(-1.,0.,0.)); +#19939 = ORIENTED_EDGE('',*,*,#19940,.T.); +#19940 = EDGE_CURVE('',#19933,#19941,#19943,.T.); +#19941 = VERTEX_POINT('',#19942); +#19942 = CARTESIAN_POINT('',(-0.32,0.32,2.54)); +#19943 = LINE('',#19944,#19945); +#19944 = CARTESIAN_POINT('',(-0.32,-2.065,2.54)); +#19945 = VECTOR('',#19946,1.); +#19946 = DIRECTION('',(0.,1.,0.)); +#19947 = ORIENTED_EDGE('',*,*,#19948,.F.); +#19948 = EDGE_CURVE('',#19925,#19941,#19949,.T.); +#19949 = LINE('',#19950,#19951); +#19950 = CARTESIAN_POINT('',(-0.16,0.32,2.54)); +#19951 = VECTOR('',#19952,1.); +#19952 = DIRECTION('',(-1.,0.,0.)); +#19953 = FACE_BOUND('',#19954,.T.); +#19954 = EDGE_LOOP('',(#19955,#19965,#19973,#19981)); +#19955 = ORIENTED_EDGE('',*,*,#19956,.F.); +#19956 = EDGE_CURVE('',#19957,#19959,#19961,.T.); +#19957 = VERTEX_POINT('',#19958); +#19958 = CARTESIAN_POINT('',(0.32,-2.22,2.54)); +#19959 = VERTEX_POINT('',#19960); +#19960 = CARTESIAN_POINT('',(-0.32,-2.22,2.54)); +#19961 = LINE('',#19962,#19963); +#19962 = CARTESIAN_POINT('',(-0.16,-2.22,2.54)); +#19963 = VECTOR('',#19964,1.); +#19964 = DIRECTION('',(-1.,0.,0.)); +#19965 = ORIENTED_EDGE('',*,*,#19966,.F.); +#19966 = EDGE_CURVE('',#19967,#19957,#19969,.T.); +#19967 = VERTEX_POINT('',#19968); +#19968 = CARTESIAN_POINT('',(0.32,-2.86,2.54)); +#19969 = LINE('',#19970,#19971); +#19970 = CARTESIAN_POINT('',(0.32,-3.335,2.54)); +#19971 = VECTOR('',#19972,1.); +#19972 = DIRECTION('',(0.,1.,0.)); +#19973 = ORIENTED_EDGE('',*,*,#19974,.T.); +#19974 = EDGE_CURVE('',#19967,#19975,#19977,.T.); +#19975 = VERTEX_POINT('',#19976); +#19976 = CARTESIAN_POINT('',(-0.32,-2.86,2.54)); +#19977 = LINE('',#19978,#19979); +#19978 = CARTESIAN_POINT('',(-0.16,-2.86,2.54)); +#19979 = VECTOR('',#19980,1.); +#19980 = DIRECTION('',(-1.,0.,0.)); +#19981 = ORIENTED_EDGE('',*,*,#19982,.T.); +#19982 = EDGE_CURVE('',#19975,#19959,#19983,.T.); +#19983 = LINE('',#19984,#19985); +#19984 = CARTESIAN_POINT('',(-0.32,-3.335,2.54)); +#19985 = VECTOR('',#19986,1.); +#19986 = DIRECTION('',(0.,1.,0.)); +#19987 = PLANE('',#19988); +#19988 = AXIS2_PLACEMENT_3D('',#19989,#19990,#19991); +#19989 = CARTESIAN_POINT('',(4.259053689278E-17,-3.81,2.54)); +#19990 = DIRECTION('',(0.,0.,1.)); +#19991 = DIRECTION('',(1.,0.,-0.)); +#19992 = ADVANCED_FACE('',(#19993),#20004,.F.); +#19993 = FACE_BOUND('',#19994,.F.); +#19994 = EDGE_LOOP('',(#19995,#20001,#20002,#20003)); +#19995 = ORIENTED_EDGE('',*,*,#19996,.T.); +#19996 = EDGE_CURVE('',#19509,#19838,#19997,.T.); +#19997 = LINE('',#19998,#19999); +#19998 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#19999 = VECTOR('',#20000,1.); +#20000 = DIRECTION('',(0.,0.,1.)); +#20001 = ORIENTED_EDGE('',*,*,#19845,.T.); +#20002 = ORIENTED_EDGE('',*,*,#19276,.F.); +#20003 = ORIENTED_EDGE('',*,*,#19516,.F.); +#20004 = PLANE('',#20005); +#20005 = AXIS2_PLACEMENT_3D('',#20006,#20007,#20008); +#20006 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#20007 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#20008 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#20009 = ADVANCED_FACE('',(#20010),#20021,.F.); +#20010 = FACE_BOUND('',#20011,.F.); +#20011 = EDGE_LOOP('',(#20012,#20013,#20014,#20020)); +#20012 = ORIENTED_EDGE('',*,*,#19316,.T.); +#20013 = ORIENTED_EDGE('',*,*,#19669,.T.); +#20014 = ORIENTED_EDGE('',*,*,#20015,.F.); +#20015 = EDGE_CURVE('',#19341,#19670,#20016,.T.); +#20016 = LINE('',#20017,#20018); +#20017 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#20018 = VECTOR('',#20019,1.); +#20019 = DIRECTION('',(0.,0.,1.)); +#20020 = ORIENTED_EDGE('',*,*,#19340,.F.); +#20021 = PLANE('',#20022); +#20022 = AXIS2_PLACEMENT_3D('',#20023,#20024,#20025); +#20023 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#20024 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#20025 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#20026 = ADVANCED_FACE('',(#20027),#20038,.F.); +#20027 = FACE_BOUND('',#20028,.F.); +#20028 = EDGE_LOOP('',(#20029,#20035,#20036,#20037)); +#20029 = ORIENTED_EDGE('',*,*,#20030,.T.); +#20030 = EDGE_CURVE('',#19501,#19830,#20031,.T.); +#20031 = LINE('',#20032,#20033); +#20032 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#20033 = VECTOR('',#20034,1.); +#20034 = DIRECTION('',(0.,0.,1.)); +#20035 = ORIENTED_EDGE('',*,*,#19837,.T.); +#20036 = ORIENTED_EDGE('',*,*,#19996,.F.); +#20037 = ORIENTED_EDGE('',*,*,#19508,.F.); +#20038 = PLANE('',#20039); +#20039 = AXIS2_PLACEMENT_3D('',#20040,#20041,#20042); +#20040 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#20041 = DIRECTION('',(-1.,0.,0.)); +#20042 = DIRECTION('',(0.,1.,0.)); +#20043 = ADVANCED_FACE('',(#20044),#20055,.F.); +#20044 = FACE_BOUND('',#20045,.F.); +#20045 = EDGE_LOOP('',(#20046,#20047,#20048,#20054)); +#20046 = ORIENTED_EDGE('',*,*,#20015,.T.); +#20047 = ORIENTED_EDGE('',*,*,#19677,.T.); +#20048 = ORIENTED_EDGE('',*,*,#20049,.F.); +#20049 = EDGE_CURVE('',#19349,#19678,#20050,.T.); +#20050 = LINE('',#20051,#20052); +#20051 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#20052 = VECTOR('',#20053,1.); +#20053 = DIRECTION('',(0.,0.,1.)); +#20054 = ORIENTED_EDGE('',*,*,#19348,.F.); +#20055 = PLANE('',#20056); +#20056 = AXIS2_PLACEMENT_3D('',#20057,#20058,#20059); +#20057 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#20058 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#20059 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#20060 = ADVANCED_FACE('',(#20061),#20072,.F.); +#20061 = FACE_BOUND('',#20062,.F.); +#20062 = EDGE_LOOP('',(#20063,#20069,#20070,#20071)); +#20063 = ORIENTED_EDGE('',*,*,#20064,.T.); +#20064 = EDGE_CURVE('',#19493,#19822,#20065,.T.); +#20065 = LINE('',#20066,#20067); +#20066 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#20067 = VECTOR('',#20068,1.); +#20068 = DIRECTION('',(0.,0.,1.)); +#20069 = ORIENTED_EDGE('',*,*,#19829,.T.); +#20070 = ORIENTED_EDGE('',*,*,#20030,.F.); +#20071 = ORIENTED_EDGE('',*,*,#19500,.F.); +#20072 = PLANE('',#20073); +#20073 = AXIS2_PLACEMENT_3D('',#20074,#20075,#20076); +#20074 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#20075 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#20076 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#20077 = ADVANCED_FACE('',(#20078),#20089,.F.); +#20078 = FACE_BOUND('',#20079,.F.); +#20079 = EDGE_LOOP('',(#20080,#20081,#20082,#20088)); +#20080 = ORIENTED_EDGE('',*,*,#20049,.T.); +#20081 = ORIENTED_EDGE('',*,*,#19685,.T.); +#20082 = ORIENTED_EDGE('',*,*,#20083,.F.); +#20083 = EDGE_CURVE('',#19357,#19686,#20084,.T.); +#20084 = LINE('',#20085,#20086); +#20085 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#20086 = VECTOR('',#20087,1.); +#20087 = DIRECTION('',(0.,0.,1.)); +#20088 = ORIENTED_EDGE('',*,*,#19356,.F.); +#20089 = PLANE('',#20090); +#20090 = AXIS2_PLACEMENT_3D('',#20091,#20092,#20093); +#20091 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#20092 = DIRECTION('',(1.,0.,0.)); +#20093 = DIRECTION('',(0.,-1.,0.)); +#20094 = ADVANCED_FACE('',(#20095),#20106,.F.); +#20095 = FACE_BOUND('',#20096,.F.); +#20096 = EDGE_LOOP('',(#20097,#20103,#20104,#20105)); +#20097 = ORIENTED_EDGE('',*,*,#20098,.T.); +#20098 = EDGE_CURVE('',#19485,#19814,#20099,.T.); +#20099 = LINE('',#20100,#20101); +#20100 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#20101 = VECTOR('',#20102,1.); +#20102 = DIRECTION('',(0.,0.,1.)); +#20103 = ORIENTED_EDGE('',*,*,#19821,.T.); +#20104 = ORIENTED_EDGE('',*,*,#20064,.F.); +#20105 = ORIENTED_EDGE('',*,*,#19492,.F.); +#20106 = PLANE('',#20107); +#20107 = AXIS2_PLACEMENT_3D('',#20108,#20109,#20110); +#20108 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#20109 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#20110 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#20111 = ADVANCED_FACE('',(#20112),#20123,.F.); +#20112 = FACE_BOUND('',#20113,.F.); +#20113 = EDGE_LOOP('',(#20114,#20115,#20116,#20122)); +#20114 = ORIENTED_EDGE('',*,*,#20083,.T.); +#20115 = ORIENTED_EDGE('',*,*,#19693,.T.); +#20116 = ORIENTED_EDGE('',*,*,#20117,.F.); +#20117 = EDGE_CURVE('',#19365,#19694,#20118,.T.); +#20118 = LINE('',#20119,#20120); +#20119 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#20120 = VECTOR('',#20121,1.); +#20121 = DIRECTION('',(0.,0.,1.)); +#20122 = ORIENTED_EDGE('',*,*,#19364,.F.); +#20123 = PLANE('',#20124); +#20124 = AXIS2_PLACEMENT_3D('',#20125,#20126,#20127); +#20125 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#20126 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#20127 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#20128 = ADVANCED_FACE('',(#20129),#20140,.F.); +#20129 = FACE_BOUND('',#20130,.F.); +#20130 = EDGE_LOOP('',(#20131,#20137,#20138,#20139)); +#20131 = ORIENTED_EDGE('',*,*,#20132,.T.); +#20132 = EDGE_CURVE('',#19477,#19806,#20133,.T.); +#20133 = LINE('',#20134,#20135); +#20134 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#20135 = VECTOR('',#20136,1.); +#20136 = DIRECTION('',(0.,0.,1.)); +#20137 = ORIENTED_EDGE('',*,*,#19813,.T.); +#20138 = ORIENTED_EDGE('',*,*,#20098,.F.); +#20139 = ORIENTED_EDGE('',*,*,#19484,.F.); +#20140 = PLANE('',#20141); +#20141 = AXIS2_PLACEMENT_3D('',#20142,#20143,#20144); +#20142 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#20143 = DIRECTION('',(-1.,0.,0.)); +#20144 = DIRECTION('',(0.,1.,0.)); +#20145 = ADVANCED_FACE('',(#20146),#20157,.F.); +#20146 = FACE_BOUND('',#20147,.F.); +#20147 = EDGE_LOOP('',(#20148,#20149,#20150,#20156)); +#20148 = ORIENTED_EDGE('',*,*,#20117,.T.); +#20149 = ORIENTED_EDGE('',*,*,#19701,.T.); +#20150 = ORIENTED_EDGE('',*,*,#20151,.F.); +#20151 = EDGE_CURVE('',#19373,#19702,#20152,.T.); +#20152 = LINE('',#20153,#20154); +#20153 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#20154 = VECTOR('',#20155,1.); +#20155 = DIRECTION('',(0.,0.,1.)); +#20156 = ORIENTED_EDGE('',*,*,#19372,.F.); +#20157 = PLANE('',#20158); +#20158 = AXIS2_PLACEMENT_3D('',#20159,#20160,#20161); +#20159 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#20160 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#20161 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#20162 = ADVANCED_FACE('',(#20163),#20174,.F.); +#20163 = FACE_BOUND('',#20164,.F.); +#20164 = EDGE_LOOP('',(#20165,#20171,#20172,#20173)); +#20165 = ORIENTED_EDGE('',*,*,#20166,.T.); +#20166 = EDGE_CURVE('',#19469,#19798,#20167,.T.); +#20167 = LINE('',#20168,#20169); +#20168 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#20169 = VECTOR('',#20170,1.); +#20170 = DIRECTION('',(0.,0.,1.)); +#20171 = ORIENTED_EDGE('',*,*,#19805,.T.); +#20172 = ORIENTED_EDGE('',*,*,#20132,.F.); +#20173 = ORIENTED_EDGE('',*,*,#19476,.F.); +#20174 = PLANE('',#20175); +#20175 = AXIS2_PLACEMENT_3D('',#20176,#20177,#20178); +#20176 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#20177 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#20178 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#20179 = ADVANCED_FACE('',(#20180),#20191,.F.); +#20180 = FACE_BOUND('',#20181,.F.); +#20181 = EDGE_LOOP('',(#20182,#20183,#20184,#20190)); +#20182 = ORIENTED_EDGE('',*,*,#20151,.T.); +#20183 = ORIENTED_EDGE('',*,*,#19709,.T.); +#20184 = ORIENTED_EDGE('',*,*,#20185,.F.); +#20185 = EDGE_CURVE('',#19381,#19710,#20186,.T.); +#20186 = LINE('',#20187,#20188); +#20187 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#20188 = VECTOR('',#20189,1.); +#20189 = DIRECTION('',(0.,0.,1.)); +#20190 = ORIENTED_EDGE('',*,*,#19380,.F.); +#20191 = PLANE('',#20192); +#20192 = AXIS2_PLACEMENT_3D('',#20193,#20194,#20195); +#20193 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#20194 = DIRECTION('',(1.,0.,0.)); +#20195 = DIRECTION('',(0.,-1.,0.)); +#20196 = ADVANCED_FACE('',(#20197),#20208,.F.); +#20197 = FACE_BOUND('',#20198,.F.); +#20198 = EDGE_LOOP('',(#20199,#20205,#20206,#20207)); +#20199 = ORIENTED_EDGE('',*,*,#20200,.T.); +#20200 = EDGE_CURVE('',#19461,#19790,#20201,.T.); +#20201 = LINE('',#20202,#20203); +#20202 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#20203 = VECTOR('',#20204,1.); +#20204 = DIRECTION('',(0.,0.,1.)); +#20205 = ORIENTED_EDGE('',*,*,#19797,.T.); +#20206 = ORIENTED_EDGE('',*,*,#20166,.F.); +#20207 = ORIENTED_EDGE('',*,*,#19468,.F.); +#20208 = PLANE('',#20209); +#20209 = AXIS2_PLACEMENT_3D('',#20210,#20211,#20212); +#20210 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#20211 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#20212 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#20213 = ADVANCED_FACE('',(#20214),#20225,.F.); +#20214 = FACE_BOUND('',#20215,.F.); +#20215 = EDGE_LOOP('',(#20216,#20217,#20218,#20224)); +#20216 = ORIENTED_EDGE('',*,*,#20185,.T.); +#20217 = ORIENTED_EDGE('',*,*,#19717,.T.); +#20218 = ORIENTED_EDGE('',*,*,#20219,.F.); +#20219 = EDGE_CURVE('',#19389,#19718,#20220,.T.); +#20220 = LINE('',#20221,#20222); +#20221 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#20222 = VECTOR('',#20223,1.); +#20223 = DIRECTION('',(0.,0.,1.)); +#20224 = ORIENTED_EDGE('',*,*,#19388,.F.); +#20225 = PLANE('',#20226); +#20226 = AXIS2_PLACEMENT_3D('',#20227,#20228,#20229); +#20227 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#20228 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#20229 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#20230 = ADVANCED_FACE('',(#20231),#20242,.F.); +#20231 = FACE_BOUND('',#20232,.F.); +#20232 = EDGE_LOOP('',(#20233,#20239,#20240,#20241)); +#20233 = ORIENTED_EDGE('',*,*,#20234,.T.); +#20234 = EDGE_CURVE('',#19453,#19782,#20235,.T.); +#20235 = LINE('',#20236,#20237); +#20236 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#20237 = VECTOR('',#20238,1.); +#20238 = DIRECTION('',(0.,0.,1.)); +#20239 = ORIENTED_EDGE('',*,*,#19789,.T.); +#20240 = ORIENTED_EDGE('',*,*,#20200,.F.); +#20241 = ORIENTED_EDGE('',*,*,#19460,.F.); +#20242 = PLANE('',#20243); +#20243 = AXIS2_PLACEMENT_3D('',#20244,#20245,#20246); +#20244 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#20245 = DIRECTION('',(-1.,0.,0.)); +#20246 = DIRECTION('',(0.,1.,0.)); +#20247 = ADVANCED_FACE('',(#20248),#20259,.F.); +#20248 = FACE_BOUND('',#20249,.F.); +#20249 = EDGE_LOOP('',(#20250,#20251,#20252,#20258)); +#20250 = ORIENTED_EDGE('',*,*,#20219,.T.); +#20251 = ORIENTED_EDGE('',*,*,#19725,.T.); +#20252 = ORIENTED_EDGE('',*,*,#20253,.F.); +#20253 = EDGE_CURVE('',#19397,#19726,#20254,.T.); +#20254 = LINE('',#20255,#20256); +#20255 = CARTESIAN_POINT('',(-1.27,-6.604,0.)); +#20256 = VECTOR('',#20257,1.); +#20257 = DIRECTION('',(0.,0.,1.)); +#20258 = ORIENTED_EDGE('',*,*,#19396,.F.); +#20259 = PLANE('',#20260); +#20260 = AXIS2_PLACEMENT_3D('',#20261,#20262,#20263); +#20261 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#20262 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#20263 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#20264 = ADVANCED_FACE('',(#20265),#20276,.F.); +#20265 = FACE_BOUND('',#20266,.F.); +#20266 = EDGE_LOOP('',(#20267,#20273,#20274,#20275)); +#20267 = ORIENTED_EDGE('',*,*,#20268,.T.); +#20268 = EDGE_CURVE('',#19445,#19774,#20269,.T.); +#20269 = LINE('',#20270,#20271); +#20270 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#20271 = VECTOR('',#20272,1.); +#20272 = DIRECTION('',(0.,0.,1.)); +#20273 = ORIENTED_EDGE('',*,*,#19781,.T.); +#20274 = ORIENTED_EDGE('',*,*,#20234,.F.); +#20275 = ORIENTED_EDGE('',*,*,#19452,.F.); +#20276 = PLANE('',#20277); +#20277 = AXIS2_PLACEMENT_3D('',#20278,#20279,#20280); +#20278 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#20279 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#20280 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#20281 = ADVANCED_FACE('',(#20282),#20293,.F.); +#20282 = FACE_BOUND('',#20283,.F.); +#20283 = EDGE_LOOP('',(#20284,#20285,#20286,#20292)); +#20284 = ORIENTED_EDGE('',*,*,#20253,.T.); +#20285 = ORIENTED_EDGE('',*,*,#19733,.T.); +#20286 = ORIENTED_EDGE('',*,*,#20287,.F.); +#20287 = EDGE_CURVE('',#19405,#19734,#20288,.T.); +#20288 = LINE('',#20289,#20290); +#20289 = CARTESIAN_POINT('',(-1.27,-8.636,0.)); +#20290 = VECTOR('',#20291,1.); +#20291 = DIRECTION('',(0.,0.,1.)); +#20292 = ORIENTED_EDGE('',*,*,#19404,.F.); +#20293 = PLANE('',#20294); +#20294 = AXIS2_PLACEMENT_3D('',#20295,#20296,#20297); +#20295 = CARTESIAN_POINT('',(-1.27,-6.604,0.)); +#20296 = DIRECTION('',(1.,0.,0.)); +#20297 = DIRECTION('',(0.,-1.,0.)); +#20298 = ADVANCED_FACE('',(#20299),#20310,.F.); +#20299 = FACE_BOUND('',#20300,.F.); +#20300 = EDGE_LOOP('',(#20301,#20307,#20308,#20309)); +#20301 = ORIENTED_EDGE('',*,*,#20302,.T.); +#20302 = EDGE_CURVE('',#19437,#19766,#20303,.T.); +#20303 = LINE('',#20304,#20305); +#20304 = CARTESIAN_POINT('',(1.27,-6.604,0.)); +#20305 = VECTOR('',#20306,1.); +#20306 = DIRECTION('',(0.,0.,1.)); +#20307 = ORIENTED_EDGE('',*,*,#19773,.T.); +#20308 = ORIENTED_EDGE('',*,*,#20268,.F.); +#20309 = ORIENTED_EDGE('',*,*,#19444,.F.); +#20310 = PLANE('',#20311); +#20311 = AXIS2_PLACEMENT_3D('',#20312,#20313,#20314); +#20312 = CARTESIAN_POINT('',(1.27,-6.604,0.)); +#20313 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#20314 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#20315 = ADVANCED_FACE('',(#20316),#20327,.F.); +#20316 = FACE_BOUND('',#20317,.F.); +#20317 = EDGE_LOOP('',(#20318,#20319,#20320,#20326)); +#20318 = ORIENTED_EDGE('',*,*,#20287,.T.); +#20319 = ORIENTED_EDGE('',*,*,#19741,.T.); +#20320 = ORIENTED_EDGE('',*,*,#20321,.F.); +#20321 = EDGE_CURVE('',#19413,#19742,#20322,.T.); +#20322 = LINE('',#20323,#20324); +#20323 = CARTESIAN_POINT('',(-1.016,-8.89,0.)); +#20324 = VECTOR('',#20325,1.); +#20325 = DIRECTION('',(0.,0.,1.)); +#20326 = ORIENTED_EDGE('',*,*,#19412,.F.); +#20327 = PLANE('',#20328); +#20328 = AXIS2_PLACEMENT_3D('',#20329,#20330,#20331); +#20329 = CARTESIAN_POINT('',(-1.27,-8.636,0.)); +#20330 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#20331 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#20332 = ADVANCED_FACE('',(#20333),#20344,.F.); +#20333 = FACE_BOUND('',#20334,.F.); +#20334 = EDGE_LOOP('',(#20335,#20341,#20342,#20343)); +#20335 = ORIENTED_EDGE('',*,*,#20336,.T.); +#20336 = EDGE_CURVE('',#19429,#19758,#20337,.T.); +#20337 = LINE('',#20338,#20339); +#20338 = CARTESIAN_POINT('',(1.27,-8.636,0.)); +#20339 = VECTOR('',#20340,1.); +#20340 = DIRECTION('',(0.,0.,1.)); +#20341 = ORIENTED_EDGE('',*,*,#19765,.T.); +#20342 = ORIENTED_EDGE('',*,*,#20302,.F.); +#20343 = ORIENTED_EDGE('',*,*,#19436,.F.); +#20344 = PLANE('',#20345); +#20345 = AXIS2_PLACEMENT_3D('',#20346,#20347,#20348); +#20346 = CARTESIAN_POINT('',(1.27,-8.636,0.)); +#20347 = DIRECTION('',(-1.,0.,0.)); +#20348 = DIRECTION('',(0.,1.,0.)); +#20349 = ADVANCED_FACE('',(#20350),#20361,.F.); +#20350 = FACE_BOUND('',#20351,.F.); +#20351 = EDGE_LOOP('',(#20352,#20353,#20354,#20360)); +#20352 = ORIENTED_EDGE('',*,*,#20321,.T.); +#20353 = ORIENTED_EDGE('',*,*,#19749,.T.); +#20354 = ORIENTED_EDGE('',*,*,#20355,.F.); +#20355 = EDGE_CURVE('',#19421,#19750,#20356,.T.); +#20356 = LINE('',#20357,#20358); +#20357 = CARTESIAN_POINT('',(1.016,-8.89,0.)); +#20358 = VECTOR('',#20359,1.); +#20359 = DIRECTION('',(0.,0.,1.)); +#20360 = ORIENTED_EDGE('',*,*,#19420,.F.); +#20361 = PLANE('',#20362); +#20362 = AXIS2_PLACEMENT_3D('',#20363,#20364,#20365); +#20363 = CARTESIAN_POINT('',(-1.016,-8.89,0.)); +#20364 = DIRECTION('',(0.,1.,0.)); +#20365 = DIRECTION('',(1.,0.,0.)); +#20366 = ADVANCED_FACE('',(#20367),#20373,.F.); +#20367 = FACE_BOUND('',#20368,.F.); +#20368 = EDGE_LOOP('',(#20369,#20370,#20371,#20372)); +#20369 = ORIENTED_EDGE('',*,*,#20355,.T.); +#20370 = ORIENTED_EDGE('',*,*,#19757,.T.); +#20371 = ORIENTED_EDGE('',*,*,#20336,.F.); +#20372 = ORIENTED_EDGE('',*,*,#19428,.F.); +#20373 = PLANE('',#20374); +#20374 = AXIS2_PLACEMENT_3D('',#20375,#20376,#20377); +#20375 = CARTESIAN_POINT('',(1.016,-8.89,0.)); +#20376 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#20377 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#20378 = ADVANCED_FACE('',(#20379),#20404,.T.); +#20379 = FACE_BOUND('',#20380,.T.); +#20380 = EDGE_LOOP('',(#20381,#20389,#20397,#20403)); +#20381 = ORIENTED_EDGE('',*,*,#20382,.F.); +#20382 = EDGE_CURVE('',#20383,#19526,#20385,.T.); +#20383 = VERTEX_POINT('',#20384); +#20384 = CARTESIAN_POINT('',(0.32,-4.76,-2.84)); +#20385 = LINE('',#20386,#20387); +#20386 = CARTESIAN_POINT('',(0.32,-4.76,-3.)); +#20387 = VECTOR('',#20388,1.); +#20388 = DIRECTION('',(0.,0.,1.)); +#20389 = ORIENTED_EDGE('',*,*,#20390,.F.); +#20390 = EDGE_CURVE('',#20391,#20383,#20393,.T.); +#20391 = VERTEX_POINT('',#20392); +#20392 = CARTESIAN_POINT('',(-0.32,-4.76,-2.84)); +#20393 = LINE('',#20394,#20395); +#20394 = CARTESIAN_POINT('',(-0.32,-4.76,-2.84)); +#20395 = VECTOR('',#20396,1.); +#20396 = DIRECTION('',(1.,0.,0.)); +#20397 = ORIENTED_EDGE('',*,*,#20398,.T.); +#20398 = EDGE_CURVE('',#20391,#19528,#20399,.T.); +#20399 = LINE('',#20400,#20401); +#20400 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#20401 = VECTOR('',#20402,1.); +#20402 = DIRECTION('',(0.,0.,1.)); +#20403 = ORIENTED_EDGE('',*,*,#19525,.F.); +#20404 = PLANE('',#20405); +#20405 = AXIS2_PLACEMENT_3D('',#20406,#20407,#20408); +#20406 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#20407 = DIRECTION('',(0.,1.,0.)); +#20408 = DIRECTION('',(0.,-0.,1.)); +#20409 = ADVANCED_FACE('',(#20410),#20428,.F.); +#20410 = FACE_BOUND('',#20411,.F.); +#20411 = EDGE_LOOP('',(#20412,#20420,#20426,#20427)); +#20412 = ORIENTED_EDGE('',*,*,#20413,.F.); +#20413 = EDGE_CURVE('',#20414,#19544,#20416,.T.); +#20414 = VERTEX_POINT('',#20415); +#20415 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#20416 = LINE('',#20417,#20418); +#20417 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#20418 = VECTOR('',#20419,1.); +#20419 = DIRECTION('',(0.,0.,1.)); +#20420 = ORIENTED_EDGE('',*,*,#20421,.T.); +#20421 = EDGE_CURVE('',#20414,#20391,#20422,.T.); +#20422 = LINE('',#20423,#20424); +#20423 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#20424 = VECTOR('',#20425,1.); +#20425 = DIRECTION('',(0.,1.,0.)); +#20426 = ORIENTED_EDGE('',*,*,#20398,.T.); +#20427 = ORIENTED_EDGE('',*,*,#19551,.F.); +#20428 = PLANE('',#20429); +#20429 = AXIS2_PLACEMENT_3D('',#20430,#20431,#20432); +#20430 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#20431 = DIRECTION('',(1.,0.,0.)); +#20432 = DIRECTION('',(0.,0.,1.)); +#20433 = ADVANCED_FACE('',(#20434),#20452,.F.); +#20434 = FACE_BOUND('',#20435,.F.); +#20435 = EDGE_LOOP('',(#20436,#20444,#20450,#20451)); +#20436 = ORIENTED_EDGE('',*,*,#20437,.F.); +#20437 = EDGE_CURVE('',#20438,#19536,#20440,.T.); +#20438 = VERTEX_POINT('',#20439); +#20439 = CARTESIAN_POINT('',(0.32,-5.4,-2.84)); +#20440 = LINE('',#20441,#20442); +#20441 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#20442 = VECTOR('',#20443,1.); +#20443 = DIRECTION('',(0.,0.,1.)); +#20444 = ORIENTED_EDGE('',*,*,#20445,.F.); +#20445 = EDGE_CURVE('',#20414,#20438,#20446,.T.); +#20446 = LINE('',#20447,#20448); +#20447 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#20448 = VECTOR('',#20449,1.); +#20449 = DIRECTION('',(1.,0.,0.)); +#20450 = ORIENTED_EDGE('',*,*,#20413,.T.); +#20451 = ORIENTED_EDGE('',*,*,#19543,.F.); +#20452 = PLANE('',#20453); +#20453 = AXIS2_PLACEMENT_3D('',#20454,#20455,#20456); +#20454 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#20455 = DIRECTION('',(0.,1.,0.)); +#20456 = DIRECTION('',(0.,-0.,1.)); +#20457 = ADVANCED_FACE('',(#20458),#20469,.T.); +#20458 = FACE_BOUND('',#20459,.T.); +#20459 = EDGE_LOOP('',(#20460,#20461,#20467,#20468)); +#20460 = ORIENTED_EDGE('',*,*,#20437,.F.); +#20461 = ORIENTED_EDGE('',*,*,#20462,.T.); +#20462 = EDGE_CURVE('',#20438,#20383,#20463,.T.); +#20463 = LINE('',#20464,#20465); +#20464 = CARTESIAN_POINT('',(0.32,-5.4,-2.84)); +#20465 = VECTOR('',#20466,1.); +#20466 = DIRECTION('',(0.,1.,0.)); +#20467 = ORIENTED_EDGE('',*,*,#20382,.T.); +#20468 = ORIENTED_EDGE('',*,*,#19535,.F.); +#20469 = PLANE('',#20470); +#20470 = AXIS2_PLACEMENT_3D('',#20471,#20472,#20473); +#20471 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#20472 = DIRECTION('',(1.,0.,0.)); +#20473 = DIRECTION('',(0.,0.,1.)); +#20474 = ADVANCED_FACE('',(#20475),#20500,.T.); +#20475 = FACE_BOUND('',#20476,.T.); +#20476 = EDGE_LOOP('',(#20477,#20485,#20493,#20499)); +#20477 = ORIENTED_EDGE('',*,*,#20478,.F.); +#20478 = EDGE_CURVE('',#20479,#19560,#20481,.T.); +#20479 = VERTEX_POINT('',#20480); +#20480 = CARTESIAN_POINT('',(0.32,-7.94,-2.84)); +#20481 = LINE('',#20482,#20483); +#20482 = CARTESIAN_POINT('',(0.32,-7.94,-3.)); +#20483 = VECTOR('',#20484,1.); +#20484 = DIRECTION('',(0.,0.,1.)); +#20485 = ORIENTED_EDGE('',*,*,#20486,.T.); +#20486 = EDGE_CURVE('',#20479,#20487,#20489,.T.); +#20487 = VERTEX_POINT('',#20488); +#20488 = CARTESIAN_POINT('',(0.32,-7.3,-2.84)); +#20489 = LINE('',#20490,#20491); +#20490 = CARTESIAN_POINT('',(0.32,-7.94,-2.84)); +#20491 = VECTOR('',#20492,1.); +#20492 = DIRECTION('',(0.,1.,0.)); +#20493 = ORIENTED_EDGE('',*,*,#20494,.T.); +#20494 = EDGE_CURVE('',#20487,#19562,#20495,.T.); +#20495 = LINE('',#20496,#20497); +#20496 = CARTESIAN_POINT('',(0.32,-7.3,-3.)); +#20497 = VECTOR('',#20498,1.); +#20498 = DIRECTION('',(0.,0.,1.)); +#20499 = ORIENTED_EDGE('',*,*,#19559,.F.); +#20500 = PLANE('',#20501); +#20501 = AXIS2_PLACEMENT_3D('',#20502,#20503,#20504); +#20502 = CARTESIAN_POINT('',(0.32,-7.94,-3.)); +#20503 = DIRECTION('',(1.,0.,0.)); +#20504 = DIRECTION('',(0.,0.,1.)); +#20505 = ADVANCED_FACE('',(#20506),#20524,.T.); +#20506 = FACE_BOUND('',#20507,.T.); +#20507 = EDGE_LOOP('',(#20508,#20509,#20517,#20523)); +#20508 = ORIENTED_EDGE('',*,*,#20494,.F.); +#20509 = ORIENTED_EDGE('',*,*,#20510,.F.); +#20510 = EDGE_CURVE('',#20511,#20487,#20513,.T.); +#20511 = VERTEX_POINT('',#20512); +#20512 = CARTESIAN_POINT('',(-0.32,-7.3,-2.84)); +#20513 = LINE('',#20514,#20515); +#20514 = CARTESIAN_POINT('',(-0.32,-7.3,-2.84)); +#20515 = VECTOR('',#20516,1.); +#20516 = DIRECTION('',(1.,0.,0.)); +#20517 = ORIENTED_EDGE('',*,*,#20518,.T.); +#20518 = EDGE_CURVE('',#20511,#19578,#20519,.T.); +#20519 = LINE('',#20520,#20521); +#20520 = CARTESIAN_POINT('',(-0.32,-7.3,-3.)); +#20521 = VECTOR('',#20522,1.); +#20522 = DIRECTION('',(0.,0.,1.)); +#20523 = ORIENTED_EDGE('',*,*,#19585,.F.); +#20524 = PLANE('',#20525); +#20525 = AXIS2_PLACEMENT_3D('',#20526,#20527,#20528); +#20526 = CARTESIAN_POINT('',(-0.32,-7.3,-3.)); +#20527 = DIRECTION('',(0.,1.,0.)); +#20528 = DIRECTION('',(0.,-0.,1.)); +#20529 = ADVANCED_FACE('',(#20530),#20548,.F.); +#20530 = FACE_BOUND('',#20531,.F.); +#20531 = EDGE_LOOP('',(#20532,#20540,#20546,#20547)); +#20532 = ORIENTED_EDGE('',*,*,#20533,.F.); +#20533 = EDGE_CURVE('',#20534,#19570,#20536,.T.); +#20534 = VERTEX_POINT('',#20535); +#20535 = CARTESIAN_POINT('',(-0.32,-7.94,-2.84)); +#20536 = LINE('',#20537,#20538); +#20537 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#20538 = VECTOR('',#20539,1.); +#20539 = DIRECTION('',(0.,0.,1.)); +#20540 = ORIENTED_EDGE('',*,*,#20541,.T.); +#20541 = EDGE_CURVE('',#20534,#20511,#20542,.T.); +#20542 = LINE('',#20543,#20544); +#20543 = CARTESIAN_POINT('',(-0.32,-7.94,-2.84)); +#20544 = VECTOR('',#20545,1.); +#20545 = DIRECTION('',(0.,1.,0.)); +#20546 = ORIENTED_EDGE('',*,*,#20518,.T.); +#20547 = ORIENTED_EDGE('',*,*,#19577,.F.); +#20548 = PLANE('',#20549); +#20549 = AXIS2_PLACEMENT_3D('',#20550,#20551,#20552); +#20550 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#20551 = DIRECTION('',(1.,0.,0.)); +#20552 = DIRECTION('',(0.,0.,1.)); +#20553 = ADVANCED_FACE('',(#20554),#20565,.F.); +#20554 = FACE_BOUND('',#20555,.F.); +#20555 = EDGE_LOOP('',(#20556,#20557,#20563,#20564)); +#20556 = ORIENTED_EDGE('',*,*,#20478,.F.); +#20557 = ORIENTED_EDGE('',*,*,#20558,.F.); +#20558 = EDGE_CURVE('',#20534,#20479,#20559,.T.); +#20559 = LINE('',#20560,#20561); +#20560 = CARTESIAN_POINT('',(-0.32,-7.94,-2.84)); +#20561 = VECTOR('',#20562,1.); +#20562 = DIRECTION('',(1.,0.,0.)); +#20563 = ORIENTED_EDGE('',*,*,#20533,.T.); +#20564 = ORIENTED_EDGE('',*,*,#19569,.F.); +#20565 = PLANE('',#20566); +#20566 = AXIS2_PLACEMENT_3D('',#20567,#20568,#20569); +#20567 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#20568 = DIRECTION('',(0.,1.,0.)); +#20569 = DIRECTION('',(0.,-0.,1.)); +#20570 = ADVANCED_FACE('',(#20571),#20596,.T.); +#20571 = FACE_BOUND('',#20572,.T.); +#20572 = EDGE_LOOP('',(#20573,#20581,#20589,#20595)); +#20573 = ORIENTED_EDGE('',*,*,#20574,.F.); +#20574 = EDGE_CURVE('',#20575,#19594,#20577,.T.); +#20575 = VERTEX_POINT('',#20576); +#20576 = CARTESIAN_POINT('',(0.32,-0.32,-2.84)); +#20577 = LINE('',#20578,#20579); +#20578 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#20579 = VECTOR('',#20580,1.); +#20580 = DIRECTION('',(0.,0.,1.)); +#20581 = ORIENTED_EDGE('',*,*,#20582,.T.); +#20582 = EDGE_CURVE('',#20575,#20583,#20585,.T.); +#20583 = VERTEX_POINT('',#20584); +#20584 = CARTESIAN_POINT('',(0.32,0.32,-2.84)); +#20585 = LINE('',#20586,#20587); +#20586 = CARTESIAN_POINT('',(0.32,-0.32,-2.84)); +#20587 = VECTOR('',#20588,1.); +#20588 = DIRECTION('',(0.,1.,0.)); +#20589 = ORIENTED_EDGE('',*,*,#20590,.T.); +#20590 = EDGE_CURVE('',#20583,#19596,#20591,.T.); +#20591 = LINE('',#20592,#20593); +#20592 = CARTESIAN_POINT('',(0.32,0.32,-3.)); +#20593 = VECTOR('',#20594,1.); +#20594 = DIRECTION('',(0.,0.,1.)); +#20595 = ORIENTED_EDGE('',*,*,#19593,.F.); +#20596 = PLANE('',#20597); +#20597 = AXIS2_PLACEMENT_3D('',#20598,#20599,#20600); +#20598 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#20599 = DIRECTION('',(1.,0.,0.)); +#20600 = DIRECTION('',(0.,0.,1.)); +#20601 = ADVANCED_FACE('',(#20602),#20620,.T.); +#20602 = FACE_BOUND('',#20603,.T.); +#20603 = EDGE_LOOP('',(#20604,#20605,#20613,#20619)); +#20604 = ORIENTED_EDGE('',*,*,#20590,.F.); +#20605 = ORIENTED_EDGE('',*,*,#20606,.F.); +#20606 = EDGE_CURVE('',#20607,#20583,#20609,.T.); +#20607 = VERTEX_POINT('',#20608); +#20608 = CARTESIAN_POINT('',(-0.32,0.32,-2.84)); +#20609 = LINE('',#20610,#20611); +#20610 = CARTESIAN_POINT('',(-0.32,0.32,-2.84)); +#20611 = VECTOR('',#20612,1.); +#20612 = DIRECTION('',(1.,0.,0.)); +#20613 = ORIENTED_EDGE('',*,*,#20614,.T.); +#20614 = EDGE_CURVE('',#20607,#19612,#20615,.T.); +#20615 = LINE('',#20616,#20617); +#20616 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#20617 = VECTOR('',#20618,1.); +#20618 = DIRECTION('',(0.,0.,1.)); +#20619 = ORIENTED_EDGE('',*,*,#19619,.F.); +#20620 = PLANE('',#20621); +#20621 = AXIS2_PLACEMENT_3D('',#20622,#20623,#20624); +#20622 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#20623 = DIRECTION('',(0.,1.,0.)); +#20624 = DIRECTION('',(0.,-0.,1.)); +#20625 = ADVANCED_FACE('',(#20626),#20644,.F.); +#20626 = FACE_BOUND('',#20627,.F.); +#20627 = EDGE_LOOP('',(#20628,#20636,#20642,#20643)); +#20628 = ORIENTED_EDGE('',*,*,#20629,.F.); +#20629 = EDGE_CURVE('',#20630,#19604,#20632,.T.); +#20630 = VERTEX_POINT('',#20631); +#20631 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#20632 = LINE('',#20633,#20634); +#20633 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#20634 = VECTOR('',#20635,1.); +#20635 = DIRECTION('',(0.,0.,1.)); +#20636 = ORIENTED_EDGE('',*,*,#20637,.T.); +#20637 = EDGE_CURVE('',#20630,#20607,#20638,.T.); +#20638 = LINE('',#20639,#20640); +#20639 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#20640 = VECTOR('',#20641,1.); +#20641 = DIRECTION('',(0.,1.,0.)); +#20642 = ORIENTED_EDGE('',*,*,#20614,.T.); +#20643 = ORIENTED_EDGE('',*,*,#19611,.F.); +#20644 = PLANE('',#20645); +#20645 = AXIS2_PLACEMENT_3D('',#20646,#20647,#20648); +#20646 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#20647 = DIRECTION('',(1.,0.,0.)); +#20648 = DIRECTION('',(0.,0.,1.)); +#20649 = ADVANCED_FACE('',(#20650),#20661,.F.); +#20650 = FACE_BOUND('',#20651,.F.); +#20651 = EDGE_LOOP('',(#20652,#20653,#20659,#20660)); +#20652 = ORIENTED_EDGE('',*,*,#20574,.F.); +#20653 = ORIENTED_EDGE('',*,*,#20654,.F.); +#20654 = EDGE_CURVE('',#20630,#20575,#20655,.T.); +#20655 = LINE('',#20656,#20657); +#20656 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#20657 = VECTOR('',#20658,1.); +#20658 = DIRECTION('',(1.,0.,0.)); +#20659 = ORIENTED_EDGE('',*,*,#20629,.T.); +#20660 = ORIENTED_EDGE('',*,*,#19603,.F.); +#20661 = PLANE('',#20662); +#20662 = AXIS2_PLACEMENT_3D('',#20663,#20664,#20665); +#20663 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#20664 = DIRECTION('',(0.,1.,0.)); +#20665 = DIRECTION('',(0.,-0.,1.)); +#20666 = ADVANCED_FACE('',(#20667),#20692,.T.); +#20667 = FACE_BOUND('',#20668,.T.); +#20668 = EDGE_LOOP('',(#20669,#20677,#20685,#20691)); +#20669 = ORIENTED_EDGE('',*,*,#20670,.F.); +#20670 = EDGE_CURVE('',#20671,#19628,#20673,.T.); +#20671 = VERTEX_POINT('',#20672); +#20672 = CARTESIAN_POINT('',(0.32,-2.22,-2.84)); +#20673 = LINE('',#20674,#20675); +#20674 = CARTESIAN_POINT('',(0.32,-2.22,-3.)); +#20675 = VECTOR('',#20676,1.); +#20676 = DIRECTION('',(0.,0.,1.)); +#20677 = ORIENTED_EDGE('',*,*,#20678,.F.); +#20678 = EDGE_CURVE('',#20679,#20671,#20681,.T.); +#20679 = VERTEX_POINT('',#20680); +#20680 = CARTESIAN_POINT('',(-0.32,-2.22,-2.84)); +#20681 = LINE('',#20682,#20683); +#20682 = CARTESIAN_POINT('',(-0.32,-2.22,-2.84)); +#20683 = VECTOR('',#20684,1.); +#20684 = DIRECTION('',(1.,0.,0.)); +#20685 = ORIENTED_EDGE('',*,*,#20686,.T.); +#20686 = EDGE_CURVE('',#20679,#19630,#20687,.T.); +#20687 = LINE('',#20688,#20689); +#20688 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#20689 = VECTOR('',#20690,1.); +#20690 = DIRECTION('',(0.,0.,1.)); +#20691 = ORIENTED_EDGE('',*,*,#19627,.F.); +#20692 = PLANE('',#20693); +#20693 = AXIS2_PLACEMENT_3D('',#20694,#20695,#20696); +#20694 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#20695 = DIRECTION('',(0.,1.,0.)); +#20696 = DIRECTION('',(0.,-0.,1.)); +#20697 = ADVANCED_FACE('',(#20698),#20716,.F.); +#20698 = FACE_BOUND('',#20699,.F.); +#20699 = EDGE_LOOP('',(#20700,#20708,#20714,#20715)); +#20700 = ORIENTED_EDGE('',*,*,#20701,.F.); +#20701 = EDGE_CURVE('',#20702,#19646,#20704,.T.); +#20702 = VERTEX_POINT('',#20703); +#20703 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#20704 = LINE('',#20705,#20706); +#20705 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#20706 = VECTOR('',#20707,1.); +#20707 = DIRECTION('',(0.,0.,1.)); +#20708 = ORIENTED_EDGE('',*,*,#20709,.T.); +#20709 = EDGE_CURVE('',#20702,#20679,#20710,.T.); +#20710 = LINE('',#20711,#20712); +#20711 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#20712 = VECTOR('',#20713,1.); +#20713 = DIRECTION('',(0.,1.,0.)); +#20714 = ORIENTED_EDGE('',*,*,#20686,.T.); +#20715 = ORIENTED_EDGE('',*,*,#19653,.F.); +#20716 = PLANE('',#20717); +#20717 = AXIS2_PLACEMENT_3D('',#20718,#20719,#20720); +#20718 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#20719 = DIRECTION('',(1.,0.,0.)); +#20720 = DIRECTION('',(0.,0.,1.)); +#20721 = ADVANCED_FACE('',(#20722),#20740,.F.); +#20722 = FACE_BOUND('',#20723,.F.); +#20723 = EDGE_LOOP('',(#20724,#20732,#20738,#20739)); +#20724 = ORIENTED_EDGE('',*,*,#20725,.F.); +#20725 = EDGE_CURVE('',#20726,#19638,#20728,.T.); +#20726 = VERTEX_POINT('',#20727); +#20727 = CARTESIAN_POINT('',(0.32,-2.86,-2.84)); +#20728 = LINE('',#20729,#20730); +#20729 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#20730 = VECTOR('',#20731,1.); +#20731 = DIRECTION('',(0.,0.,1.)); +#20732 = ORIENTED_EDGE('',*,*,#20733,.F.); +#20733 = EDGE_CURVE('',#20702,#20726,#20734,.T.); +#20734 = LINE('',#20735,#20736); +#20735 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#20736 = VECTOR('',#20737,1.); +#20737 = DIRECTION('',(1.,0.,0.)); +#20738 = ORIENTED_EDGE('',*,*,#20701,.T.); +#20739 = ORIENTED_EDGE('',*,*,#19645,.F.); +#20740 = PLANE('',#20741); +#20741 = AXIS2_PLACEMENT_3D('',#20742,#20743,#20744); +#20742 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#20743 = DIRECTION('',(0.,1.,0.)); +#20744 = DIRECTION('',(0.,-0.,1.)); +#20745 = ADVANCED_FACE('',(#20746),#20757,.T.); +#20746 = FACE_BOUND('',#20747,.T.); +#20747 = EDGE_LOOP('',(#20748,#20749,#20755,#20756)); +#20748 = ORIENTED_EDGE('',*,*,#20725,.F.); +#20749 = ORIENTED_EDGE('',*,*,#20750,.T.); +#20750 = EDGE_CURVE('',#20726,#20671,#20751,.T.); +#20751 = LINE('',#20752,#20753); +#20752 = CARTESIAN_POINT('',(0.32,-2.86,-2.84)); +#20753 = VECTOR('',#20754,1.); +#20754 = DIRECTION('',(0.,1.,0.)); +#20755 = ORIENTED_EDGE('',*,*,#20670,.T.); +#20756 = ORIENTED_EDGE('',*,*,#19637,.F.); +#20757 = PLANE('',#20758); +#20758 = AXIS2_PLACEMENT_3D('',#20759,#20760,#20761); +#20759 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#20760 = DIRECTION('',(1.,0.,0.)); +#20761 = DIRECTION('',(0.,0.,1.)); +#20762 = ADVANCED_FACE('',(#20763),#20788,.T.); +#20763 = FACE_BOUND('',#20764,.T.); +#20764 = EDGE_LOOP('',(#20765,#20773,#20774,#20782)); +#20765 = ORIENTED_EDGE('',*,*,#20766,.F.); +#20766 = EDGE_CURVE('',#19855,#20767,#20769,.T.); +#20767 = VERTEX_POINT('',#20768); +#20768 = CARTESIAN_POINT('',(0.32,-4.76,8.38)); +#20769 = LINE('',#20770,#20771); +#20770 = CARTESIAN_POINT('',(0.32,-4.76,-3.)); +#20771 = VECTOR('',#20772,1.); +#20772 = DIRECTION('',(0.,0.,1.)); +#20773 = ORIENTED_EDGE('',*,*,#19854,.T.); +#20774 = ORIENTED_EDGE('',*,*,#20775,.T.); +#20775 = EDGE_CURVE('',#19857,#20776,#20778,.T.); +#20776 = VERTEX_POINT('',#20777); +#20777 = CARTESIAN_POINT('',(-0.32,-4.76,8.38)); +#20778 = LINE('',#20779,#20780); +#20779 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#20780 = VECTOR('',#20781,1.); +#20781 = DIRECTION('',(0.,0.,1.)); +#20782 = ORIENTED_EDGE('',*,*,#20783,.T.); +#20783 = EDGE_CURVE('',#20776,#20767,#20784,.T.); +#20784 = LINE('',#20785,#20786); +#20785 = CARTESIAN_POINT('',(-0.32,-4.76,8.38)); +#20786 = VECTOR('',#20787,1.); +#20787 = DIRECTION('',(1.,0.,0.)); +#20788 = PLANE('',#20789); +#20789 = AXIS2_PLACEMENT_3D('',#20790,#20791,#20792); +#20790 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#20791 = DIRECTION('',(0.,1.,0.)); +#20792 = DIRECTION('',(0.,-0.,1.)); +#20793 = ADVANCED_FACE('',(#20794),#20812,.F.); +#20794 = FACE_BOUND('',#20795,.F.); +#20795 = EDGE_LOOP('',(#20796,#20804,#20805,#20806)); +#20796 = ORIENTED_EDGE('',*,*,#20797,.F.); +#20797 = EDGE_CURVE('',#19873,#20798,#20800,.T.); +#20798 = VERTEX_POINT('',#20799); +#20799 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#20800 = LINE('',#20801,#20802); +#20801 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#20802 = VECTOR('',#20803,1.); +#20803 = DIRECTION('',(0.,0.,1.)); +#20804 = ORIENTED_EDGE('',*,*,#19880,.T.); +#20805 = ORIENTED_EDGE('',*,*,#20775,.T.); +#20806 = ORIENTED_EDGE('',*,*,#20807,.F.); +#20807 = EDGE_CURVE('',#20798,#20776,#20808,.T.); +#20808 = LINE('',#20809,#20810); +#20809 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#20810 = VECTOR('',#20811,1.); +#20811 = DIRECTION('',(0.,1.,0.)); +#20812 = PLANE('',#20813); +#20813 = AXIS2_PLACEMENT_3D('',#20814,#20815,#20816); +#20814 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#20815 = DIRECTION('',(1.,0.,0.)); +#20816 = DIRECTION('',(0.,0.,1.)); +#20817 = ADVANCED_FACE('',(#20818),#20836,.F.); +#20818 = FACE_BOUND('',#20819,.F.); +#20819 = EDGE_LOOP('',(#20820,#20828,#20829,#20830)); +#20820 = ORIENTED_EDGE('',*,*,#20821,.F.); +#20821 = EDGE_CURVE('',#19865,#20822,#20824,.T.); +#20822 = VERTEX_POINT('',#20823); +#20823 = CARTESIAN_POINT('',(0.32,-5.4,8.38)); +#20824 = LINE('',#20825,#20826); +#20825 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#20826 = VECTOR('',#20827,1.); +#20827 = DIRECTION('',(0.,0.,1.)); +#20828 = ORIENTED_EDGE('',*,*,#19872,.T.); +#20829 = ORIENTED_EDGE('',*,*,#20797,.T.); +#20830 = ORIENTED_EDGE('',*,*,#20831,.T.); +#20831 = EDGE_CURVE('',#20798,#20822,#20832,.T.); +#20832 = LINE('',#20833,#20834); +#20833 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#20834 = VECTOR('',#20835,1.); +#20835 = DIRECTION('',(1.,0.,0.)); +#20836 = PLANE('',#20837); +#20837 = AXIS2_PLACEMENT_3D('',#20838,#20839,#20840); +#20838 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#20839 = DIRECTION('',(0.,1.,0.)); +#20840 = DIRECTION('',(0.,-0.,1.)); +#20841 = ADVANCED_FACE('',(#20842),#20853,.T.); +#20842 = FACE_BOUND('',#20843,.T.); +#20843 = EDGE_LOOP('',(#20844,#20845,#20846,#20847)); +#20844 = ORIENTED_EDGE('',*,*,#20821,.F.); +#20845 = ORIENTED_EDGE('',*,*,#19864,.T.); +#20846 = ORIENTED_EDGE('',*,*,#20766,.T.); +#20847 = ORIENTED_EDGE('',*,*,#20848,.F.); +#20848 = EDGE_CURVE('',#20822,#20767,#20849,.T.); +#20849 = LINE('',#20850,#20851); +#20850 = CARTESIAN_POINT('',(0.32,-5.4,8.38)); +#20851 = VECTOR('',#20852,1.); +#20852 = DIRECTION('',(0.,1.,0.)); +#20853 = PLANE('',#20854); +#20854 = AXIS2_PLACEMENT_3D('',#20855,#20856,#20857); +#20855 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#20856 = DIRECTION('',(1.,0.,0.)); +#20857 = DIRECTION('',(0.,0.,1.)); +#20858 = ADVANCED_FACE('',(#20859),#20884,.T.); +#20859 = FACE_BOUND('',#20860,.T.); +#20860 = EDGE_LOOP('',(#20861,#20869,#20870,#20878)); +#20861 = ORIENTED_EDGE('',*,*,#20862,.F.); +#20862 = EDGE_CURVE('',#19889,#20863,#20865,.T.); +#20863 = VERTEX_POINT('',#20864); +#20864 = CARTESIAN_POINT('',(0.32,-7.94,8.38)); +#20865 = LINE('',#20866,#20867); +#20866 = CARTESIAN_POINT('',(0.32,-7.94,-3.)); +#20867 = VECTOR('',#20868,1.); +#20868 = DIRECTION('',(0.,0.,1.)); +#20869 = ORIENTED_EDGE('',*,*,#19888,.T.); +#20870 = ORIENTED_EDGE('',*,*,#20871,.T.); +#20871 = EDGE_CURVE('',#19891,#20872,#20874,.T.); +#20872 = VERTEX_POINT('',#20873); +#20873 = CARTESIAN_POINT('',(0.32,-7.3,8.38)); +#20874 = LINE('',#20875,#20876); +#20875 = CARTESIAN_POINT('',(0.32,-7.3,-3.)); +#20876 = VECTOR('',#20877,1.); +#20877 = DIRECTION('',(0.,0.,1.)); +#20878 = ORIENTED_EDGE('',*,*,#20879,.F.); +#20879 = EDGE_CURVE('',#20863,#20872,#20880,.T.); +#20880 = LINE('',#20881,#20882); +#20881 = CARTESIAN_POINT('',(0.32,-7.94,8.38)); +#20882 = VECTOR('',#20883,1.); +#20883 = DIRECTION('',(0.,1.,0.)); +#20884 = PLANE('',#20885); +#20885 = AXIS2_PLACEMENT_3D('',#20886,#20887,#20888); +#20886 = CARTESIAN_POINT('',(0.32,-7.94,-3.)); +#20887 = DIRECTION('',(1.,0.,0.)); +#20888 = DIRECTION('',(0.,0.,1.)); +#20889 = ADVANCED_FACE('',(#20890),#20908,.T.); +#20890 = FACE_BOUND('',#20891,.T.); +#20891 = EDGE_LOOP('',(#20892,#20893,#20894,#20902)); +#20892 = ORIENTED_EDGE('',*,*,#20871,.F.); +#20893 = ORIENTED_EDGE('',*,*,#19914,.T.); +#20894 = ORIENTED_EDGE('',*,*,#20895,.T.); +#20895 = EDGE_CURVE('',#19907,#20896,#20898,.T.); +#20896 = VERTEX_POINT('',#20897); +#20897 = CARTESIAN_POINT('',(-0.32,-7.3,8.38)); +#20898 = LINE('',#20899,#20900); +#20899 = CARTESIAN_POINT('',(-0.32,-7.3,-3.)); +#20900 = VECTOR('',#20901,1.); +#20901 = DIRECTION('',(0.,0.,1.)); +#20902 = ORIENTED_EDGE('',*,*,#20903,.T.); +#20903 = EDGE_CURVE('',#20896,#20872,#20904,.T.); +#20904 = LINE('',#20905,#20906); +#20905 = CARTESIAN_POINT('',(-0.32,-7.3,8.38)); +#20906 = VECTOR('',#20907,1.); +#20907 = DIRECTION('',(1.,0.,0.)); +#20908 = PLANE('',#20909); +#20909 = AXIS2_PLACEMENT_3D('',#20910,#20911,#20912); +#20910 = CARTESIAN_POINT('',(-0.32,-7.3,-3.)); +#20911 = DIRECTION('',(0.,1.,0.)); +#20912 = DIRECTION('',(0.,-0.,1.)); +#20913 = ADVANCED_FACE('',(#20914),#20932,.F.); +#20914 = FACE_BOUND('',#20915,.F.); +#20915 = EDGE_LOOP('',(#20916,#20924,#20925,#20926)); +#20916 = ORIENTED_EDGE('',*,*,#20917,.F.); +#20917 = EDGE_CURVE('',#19899,#20918,#20920,.T.); +#20918 = VERTEX_POINT('',#20919); +#20919 = CARTESIAN_POINT('',(-0.32,-7.94,8.38)); +#20920 = LINE('',#20921,#20922); +#20921 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#20922 = VECTOR('',#20923,1.); +#20923 = DIRECTION('',(0.,0.,1.)); +#20924 = ORIENTED_EDGE('',*,*,#19906,.T.); +#20925 = ORIENTED_EDGE('',*,*,#20895,.T.); +#20926 = ORIENTED_EDGE('',*,*,#20927,.F.); +#20927 = EDGE_CURVE('',#20918,#20896,#20928,.T.); +#20928 = LINE('',#20929,#20930); +#20929 = CARTESIAN_POINT('',(-0.32,-7.94,8.38)); +#20930 = VECTOR('',#20931,1.); +#20931 = DIRECTION('',(0.,1.,0.)); +#20932 = PLANE('',#20933); +#20933 = AXIS2_PLACEMENT_3D('',#20934,#20935,#20936); +#20934 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#20935 = DIRECTION('',(1.,0.,0.)); +#20936 = DIRECTION('',(0.,0.,1.)); +#20937 = ADVANCED_FACE('',(#20938),#20949,.F.); +#20938 = FACE_BOUND('',#20939,.F.); +#20939 = EDGE_LOOP('',(#20940,#20941,#20942,#20943)); +#20940 = ORIENTED_EDGE('',*,*,#20862,.F.); +#20941 = ORIENTED_EDGE('',*,*,#19898,.T.); +#20942 = ORIENTED_EDGE('',*,*,#20917,.T.); +#20943 = ORIENTED_EDGE('',*,*,#20944,.T.); +#20944 = EDGE_CURVE('',#20918,#20863,#20945,.T.); +#20945 = LINE('',#20946,#20947); +#20946 = CARTESIAN_POINT('',(-0.32,-7.94,8.38)); +#20947 = VECTOR('',#20948,1.); +#20948 = DIRECTION('',(1.,0.,0.)); +#20949 = PLANE('',#20950); +#20950 = AXIS2_PLACEMENT_3D('',#20951,#20952,#20953); +#20951 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#20952 = DIRECTION('',(0.,1.,0.)); +#20953 = DIRECTION('',(0.,-0.,1.)); +#20954 = ADVANCED_FACE('',(#20955),#20980,.T.); +#20955 = FACE_BOUND('',#20956,.T.); +#20956 = EDGE_LOOP('',(#20957,#20965,#20966,#20974)); +#20957 = ORIENTED_EDGE('',*,*,#20958,.F.); +#20958 = EDGE_CURVE('',#19923,#20959,#20961,.T.); +#20959 = VERTEX_POINT('',#20960); +#20960 = CARTESIAN_POINT('',(0.32,-0.32,8.38)); +#20961 = LINE('',#20962,#20963); +#20962 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#20963 = VECTOR('',#20964,1.); +#20964 = DIRECTION('',(0.,0.,1.)); +#20965 = ORIENTED_EDGE('',*,*,#19922,.T.); +#20966 = ORIENTED_EDGE('',*,*,#20967,.T.); +#20967 = EDGE_CURVE('',#19925,#20968,#20970,.T.); +#20968 = VERTEX_POINT('',#20969); +#20969 = CARTESIAN_POINT('',(0.32,0.32,8.38)); +#20970 = LINE('',#20971,#20972); +#20971 = CARTESIAN_POINT('',(0.32,0.32,-3.)); +#20972 = VECTOR('',#20973,1.); +#20973 = DIRECTION('',(0.,0.,1.)); +#20974 = ORIENTED_EDGE('',*,*,#20975,.F.); +#20975 = EDGE_CURVE('',#20959,#20968,#20976,.T.); +#20976 = LINE('',#20977,#20978); +#20977 = CARTESIAN_POINT('',(0.32,-0.32,8.38)); +#20978 = VECTOR('',#20979,1.); +#20979 = DIRECTION('',(0.,1.,0.)); +#20980 = PLANE('',#20981); +#20981 = AXIS2_PLACEMENT_3D('',#20982,#20983,#20984); +#20982 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#20983 = DIRECTION('',(1.,0.,0.)); +#20984 = DIRECTION('',(0.,0.,1.)); +#20985 = ADVANCED_FACE('',(#20986),#21004,.T.); +#20986 = FACE_BOUND('',#20987,.T.); +#20987 = EDGE_LOOP('',(#20988,#20989,#20990,#20998)); +#20988 = ORIENTED_EDGE('',*,*,#20967,.F.); +#20989 = ORIENTED_EDGE('',*,*,#19948,.T.); +#20990 = ORIENTED_EDGE('',*,*,#20991,.T.); +#20991 = EDGE_CURVE('',#19941,#20992,#20994,.T.); +#20992 = VERTEX_POINT('',#20993); +#20993 = CARTESIAN_POINT('',(-0.32,0.32,8.38)); +#20994 = LINE('',#20995,#20996); +#20995 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#20996 = VECTOR('',#20997,1.); +#20997 = DIRECTION('',(0.,0.,1.)); +#20998 = ORIENTED_EDGE('',*,*,#20999,.T.); +#20999 = EDGE_CURVE('',#20992,#20968,#21000,.T.); +#21000 = LINE('',#21001,#21002); +#21001 = CARTESIAN_POINT('',(-0.32,0.32,8.38)); +#21002 = VECTOR('',#21003,1.); +#21003 = DIRECTION('',(1.,0.,0.)); +#21004 = PLANE('',#21005); +#21005 = AXIS2_PLACEMENT_3D('',#21006,#21007,#21008); +#21006 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#21007 = DIRECTION('',(0.,1.,0.)); +#21008 = DIRECTION('',(0.,-0.,1.)); +#21009 = ADVANCED_FACE('',(#21010),#21028,.F.); +#21010 = FACE_BOUND('',#21011,.F.); +#21011 = EDGE_LOOP('',(#21012,#21020,#21021,#21022)); +#21012 = ORIENTED_EDGE('',*,*,#21013,.F.); +#21013 = EDGE_CURVE('',#19933,#21014,#21016,.T.); +#21014 = VERTEX_POINT('',#21015); +#21015 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#21016 = LINE('',#21017,#21018); +#21017 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#21018 = VECTOR('',#21019,1.); +#21019 = DIRECTION('',(0.,0.,1.)); +#21020 = ORIENTED_EDGE('',*,*,#19940,.T.); +#21021 = ORIENTED_EDGE('',*,*,#20991,.T.); +#21022 = ORIENTED_EDGE('',*,*,#21023,.F.); +#21023 = EDGE_CURVE('',#21014,#20992,#21024,.T.); +#21024 = LINE('',#21025,#21026); +#21025 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#21026 = VECTOR('',#21027,1.); +#21027 = DIRECTION('',(0.,1.,0.)); +#21028 = PLANE('',#21029); +#21029 = AXIS2_PLACEMENT_3D('',#21030,#21031,#21032); +#21030 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#21031 = DIRECTION('',(1.,0.,0.)); +#21032 = DIRECTION('',(0.,0.,1.)); +#21033 = ADVANCED_FACE('',(#21034),#21045,.F.); +#21034 = FACE_BOUND('',#21035,.F.); +#21035 = EDGE_LOOP('',(#21036,#21037,#21038,#21039)); +#21036 = ORIENTED_EDGE('',*,*,#20958,.F.); +#21037 = ORIENTED_EDGE('',*,*,#19932,.T.); +#21038 = ORIENTED_EDGE('',*,*,#21013,.T.); +#21039 = ORIENTED_EDGE('',*,*,#21040,.T.); +#21040 = EDGE_CURVE('',#21014,#20959,#21041,.T.); +#21041 = LINE('',#21042,#21043); +#21042 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#21043 = VECTOR('',#21044,1.); +#21044 = DIRECTION('',(1.,0.,0.)); +#21045 = PLANE('',#21046); +#21046 = AXIS2_PLACEMENT_3D('',#21047,#21048,#21049); +#21047 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#21048 = DIRECTION('',(0.,1.,0.)); +#21049 = DIRECTION('',(0.,-0.,1.)); +#21050 = ADVANCED_FACE('',(#21051),#21076,.T.); +#21051 = FACE_BOUND('',#21052,.T.); +#21052 = EDGE_LOOP('',(#21053,#21061,#21062,#21070)); +#21053 = ORIENTED_EDGE('',*,*,#21054,.F.); +#21054 = EDGE_CURVE('',#19957,#21055,#21057,.T.); +#21055 = VERTEX_POINT('',#21056); +#21056 = CARTESIAN_POINT('',(0.32,-2.22,8.38)); +#21057 = LINE('',#21058,#21059); +#21058 = CARTESIAN_POINT('',(0.32,-2.22,-3.)); +#21059 = VECTOR('',#21060,1.); +#21060 = DIRECTION('',(0.,0.,1.)); +#21061 = ORIENTED_EDGE('',*,*,#19956,.T.); +#21062 = ORIENTED_EDGE('',*,*,#21063,.T.); +#21063 = EDGE_CURVE('',#19959,#21064,#21066,.T.); +#21064 = VERTEX_POINT('',#21065); +#21065 = CARTESIAN_POINT('',(-0.32,-2.22,8.38)); +#21066 = LINE('',#21067,#21068); +#21067 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#21068 = VECTOR('',#21069,1.); +#21069 = DIRECTION('',(0.,0.,1.)); +#21070 = ORIENTED_EDGE('',*,*,#21071,.T.); +#21071 = EDGE_CURVE('',#21064,#21055,#21072,.T.); +#21072 = LINE('',#21073,#21074); +#21073 = CARTESIAN_POINT('',(-0.32,-2.22,8.38)); +#21074 = VECTOR('',#21075,1.); +#21075 = DIRECTION('',(1.,0.,0.)); +#21076 = PLANE('',#21077); +#21077 = AXIS2_PLACEMENT_3D('',#21078,#21079,#21080); +#21078 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#21079 = DIRECTION('',(0.,1.,0.)); +#21080 = DIRECTION('',(0.,-0.,1.)); +#21081 = ADVANCED_FACE('',(#21082),#21100,.F.); +#21082 = FACE_BOUND('',#21083,.F.); +#21083 = EDGE_LOOP('',(#21084,#21092,#21093,#21094)); +#21084 = ORIENTED_EDGE('',*,*,#21085,.F.); +#21085 = EDGE_CURVE('',#19975,#21086,#21088,.T.); +#21086 = VERTEX_POINT('',#21087); +#21087 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#21088 = LINE('',#21089,#21090); +#21089 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#21090 = VECTOR('',#21091,1.); +#21091 = DIRECTION('',(0.,0.,1.)); +#21092 = ORIENTED_EDGE('',*,*,#19982,.T.); +#21093 = ORIENTED_EDGE('',*,*,#21063,.T.); +#21094 = ORIENTED_EDGE('',*,*,#21095,.F.); +#21095 = EDGE_CURVE('',#21086,#21064,#21096,.T.); +#21096 = LINE('',#21097,#21098); +#21097 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#21098 = VECTOR('',#21099,1.); +#21099 = DIRECTION('',(0.,1.,0.)); +#21100 = PLANE('',#21101); +#21101 = AXIS2_PLACEMENT_3D('',#21102,#21103,#21104); +#21102 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#21103 = DIRECTION('',(1.,0.,0.)); +#21104 = DIRECTION('',(0.,0.,1.)); +#21105 = ADVANCED_FACE('',(#21106),#21124,.F.); +#21106 = FACE_BOUND('',#21107,.F.); +#21107 = EDGE_LOOP('',(#21108,#21116,#21117,#21118)); +#21108 = ORIENTED_EDGE('',*,*,#21109,.F.); +#21109 = EDGE_CURVE('',#19967,#21110,#21112,.T.); +#21110 = VERTEX_POINT('',#21111); +#21111 = CARTESIAN_POINT('',(0.32,-2.86,8.38)); +#21112 = LINE('',#21113,#21114); +#21113 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#21114 = VECTOR('',#21115,1.); +#21115 = DIRECTION('',(0.,0.,1.)); +#21116 = ORIENTED_EDGE('',*,*,#19974,.T.); +#21117 = ORIENTED_EDGE('',*,*,#21085,.T.); +#21118 = ORIENTED_EDGE('',*,*,#21119,.T.); +#21119 = EDGE_CURVE('',#21086,#21110,#21120,.T.); +#21120 = LINE('',#21121,#21122); +#21121 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#21122 = VECTOR('',#21123,1.); +#21123 = DIRECTION('',(1.,0.,0.)); +#21124 = PLANE('',#21125); +#21125 = AXIS2_PLACEMENT_3D('',#21126,#21127,#21128); +#21126 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#21127 = DIRECTION('',(0.,1.,0.)); +#21128 = DIRECTION('',(0.,-0.,1.)); +#21129 = ADVANCED_FACE('',(#21130),#21141,.T.); +#21130 = FACE_BOUND('',#21131,.T.); +#21131 = EDGE_LOOP('',(#21132,#21133,#21134,#21135)); +#21132 = ORIENTED_EDGE('',*,*,#21109,.F.); +#21133 = ORIENTED_EDGE('',*,*,#19966,.T.); +#21134 = ORIENTED_EDGE('',*,*,#21054,.T.); +#21135 = ORIENTED_EDGE('',*,*,#21136,.F.); +#21136 = EDGE_CURVE('',#21110,#21055,#21137,.T.); +#21137 = LINE('',#21138,#21139); +#21138 = CARTESIAN_POINT('',(0.32,-2.86,8.38)); +#21139 = VECTOR('',#21140,1.); +#21140 = DIRECTION('',(0.,1.,0.)); +#21141 = PLANE('',#21142); +#21142 = AXIS2_PLACEMENT_3D('',#21143,#21144,#21145); +#21143 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#21144 = DIRECTION('',(1.,0.,0.)); +#21145 = DIRECTION('',(0.,0.,1.)); +#21146 = ADVANCED_FACE('',(#21147),#21172,.F.); +#21147 = FACE_BOUND('',#21148,.T.); +#21148 = EDGE_LOOP('',(#21149,#21157,#21158,#21166)); +#21149 = ORIENTED_EDGE('',*,*,#21150,.F.); +#21150 = EDGE_CURVE('',#20391,#21151,#21153,.T.); +#21151 = VERTEX_POINT('',#21152); +#21152 = CARTESIAN_POINT('',(-0.16,-4.92,-3.)); +#21153 = LINE('',#21154,#21155); +#21154 = CARTESIAN_POINT('',(-0.16,-4.92,-3.)); +#21155 = VECTOR('',#21156,1.); +#21156 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#21157 = ORIENTED_EDGE('',*,*,#20390,.T.); +#21158 = ORIENTED_EDGE('',*,*,#21159,.T.); +#21159 = EDGE_CURVE('',#20383,#21160,#21162,.T.); +#21160 = VERTEX_POINT('',#21161); +#21161 = CARTESIAN_POINT('',(0.16,-4.92,-3.)); +#21162 = LINE('',#21163,#21164); +#21163 = CARTESIAN_POINT('',(5.333333333333E-02,-5.026666666667, + -3.106666666667)); +#21164 = VECTOR('',#21165,1.); +#21165 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#21166 = ORIENTED_EDGE('',*,*,#21167,.F.); +#21167 = EDGE_CURVE('',#21151,#21160,#21168,.T.); +#21168 = LINE('',#21169,#21170); +#21169 = CARTESIAN_POINT('',(-0.32,-4.92,-3.)); +#21170 = VECTOR('',#21171,1.); +#21171 = DIRECTION('',(1.,0.,0.)); +#21172 = PLANE('',#21173); +#21173 = AXIS2_PLACEMENT_3D('',#21174,#21175,#21176); +#21174 = CARTESIAN_POINT('',(-0.32,-4.84,-2.92)); +#21175 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#21176 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#21177 = ADVANCED_FACE('',(#21178),#21196,.T.); +#21178 = FACE_BOUND('',#21179,.T.); +#21179 = EDGE_LOOP('',(#21180,#21188,#21189,#21190)); +#21180 = ORIENTED_EDGE('',*,*,#21181,.F.); +#21181 = EDGE_CURVE('',#20414,#21182,#21184,.T.); +#21182 = VERTEX_POINT('',#21183); +#21183 = CARTESIAN_POINT('',(-0.16,-5.24,-3.)); +#21184 = LINE('',#21185,#21186); +#21185 = CARTESIAN_POINT('',(-0.266666666667,-5.346666666667, + -2.893333333333)); +#21186 = VECTOR('',#21187,1.); +#21187 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#21188 = ORIENTED_EDGE('',*,*,#20421,.T.); +#21189 = ORIENTED_EDGE('',*,*,#21150,.T.); +#21190 = ORIENTED_EDGE('',*,*,#21191,.F.); +#21191 = EDGE_CURVE('',#21182,#21151,#21192,.T.); +#21192 = LINE('',#21193,#21194); +#21193 = CARTESIAN_POINT('',(-0.16,-5.4,-3.)); +#21194 = VECTOR('',#21195,1.); +#21195 = DIRECTION('',(0.,1.,0.)); +#21196 = PLANE('',#21197); +#21197 = AXIS2_PLACEMENT_3D('',#21198,#21199,#21200); +#21198 = CARTESIAN_POINT('',(-0.24,-5.4,-2.92)); +#21199 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#21200 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#21201 = ADVANCED_FACE('',(#21202),#21220,.T.); +#21202 = FACE_BOUND('',#21203,.F.); +#21203 = EDGE_LOOP('',(#21204,#21205,#21206,#21214)); +#21204 = ORIENTED_EDGE('',*,*,#21181,.F.); +#21205 = ORIENTED_EDGE('',*,*,#20445,.T.); +#21206 = ORIENTED_EDGE('',*,*,#21207,.T.); +#21207 = EDGE_CURVE('',#20438,#21208,#21210,.T.); +#21208 = VERTEX_POINT('',#21209); +#21209 = CARTESIAN_POINT('',(0.16,-5.24,-3.)); +#21210 = LINE('',#21211,#21212); +#21211 = CARTESIAN_POINT('',(0.16,-5.24,-3.)); +#21212 = VECTOR('',#21213,1.); +#21213 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#21214 = ORIENTED_EDGE('',*,*,#21215,.F.); +#21215 = EDGE_CURVE('',#21182,#21208,#21216,.T.); +#21216 = LINE('',#21217,#21218); +#21217 = CARTESIAN_POINT('',(-0.32,-5.24,-3.)); +#21218 = VECTOR('',#21219,1.); +#21219 = DIRECTION('',(1.,0.,0.)); +#21220 = PLANE('',#21221); +#21221 = AXIS2_PLACEMENT_3D('',#21222,#21223,#21224); +#21222 = CARTESIAN_POINT('',(-0.32,-5.32,-2.92)); +#21223 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#21224 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#21225 = ADVANCED_FACE('',(#21226),#21237,.F.); +#21226 = FACE_BOUND('',#21227,.F.); +#21227 = EDGE_LOOP('',(#21228,#21229,#21230,#21231)); +#21228 = ORIENTED_EDGE('',*,*,#21207,.F.); +#21229 = ORIENTED_EDGE('',*,*,#20462,.T.); +#21230 = ORIENTED_EDGE('',*,*,#21159,.T.); +#21231 = ORIENTED_EDGE('',*,*,#21232,.F.); +#21232 = EDGE_CURVE('',#21208,#21160,#21233,.T.); +#21233 = LINE('',#21234,#21235); +#21234 = CARTESIAN_POINT('',(0.16,-5.4,-3.)); +#21235 = VECTOR('',#21236,1.); +#21236 = DIRECTION('',(0.,1.,0.)); +#21237 = PLANE('',#21238); +#21238 = AXIS2_PLACEMENT_3D('',#21239,#21240,#21241); +#21239 = CARTESIAN_POINT('',(0.24,-5.4,-2.92)); +#21240 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#21241 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#21242 = ADVANCED_FACE('',(#21243),#21268,.F.); +#21243 = FACE_BOUND('',#21244,.F.); +#21244 = EDGE_LOOP('',(#21245,#21253,#21254,#21262)); +#21245 = ORIENTED_EDGE('',*,*,#21246,.F.); +#21246 = EDGE_CURVE('',#20479,#21247,#21249,.T.); +#21247 = VERTEX_POINT('',#21248); +#21248 = CARTESIAN_POINT('',(0.16,-7.78,-3.)); +#21249 = LINE('',#21250,#21251); +#21250 = CARTESIAN_POINT('',(0.16,-7.78,-3.)); +#21251 = VECTOR('',#21252,1.); +#21252 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#21253 = ORIENTED_EDGE('',*,*,#20486,.T.); +#21254 = ORIENTED_EDGE('',*,*,#21255,.T.); +#21255 = EDGE_CURVE('',#20487,#21256,#21258,.T.); +#21256 = VERTEX_POINT('',#21257); +#21257 = CARTESIAN_POINT('',(0.16,-7.46,-3.)); +#21258 = LINE('',#21259,#21260); +#21259 = CARTESIAN_POINT('',(5.333333333333E-02,-7.566666666667, + -3.106666666667)); +#21260 = VECTOR('',#21261,1.); +#21261 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#21262 = ORIENTED_EDGE('',*,*,#21263,.F.); +#21263 = EDGE_CURVE('',#21247,#21256,#21264,.T.); +#21264 = LINE('',#21265,#21266); +#21265 = CARTESIAN_POINT('',(0.16,-7.94,-3.)); +#21266 = VECTOR('',#21267,1.); +#21267 = DIRECTION('',(0.,1.,0.)); +#21268 = PLANE('',#21269); +#21269 = AXIS2_PLACEMENT_3D('',#21270,#21271,#21272); +#21270 = CARTESIAN_POINT('',(0.24,-7.94,-2.92)); +#21271 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#21272 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#21273 = ADVANCED_FACE('',(#21274),#21292,.F.); +#21274 = FACE_BOUND('',#21275,.T.); +#21275 = EDGE_LOOP('',(#21276,#21284,#21285,#21286)); +#21276 = ORIENTED_EDGE('',*,*,#21277,.F.); +#21277 = EDGE_CURVE('',#20511,#21278,#21280,.T.); +#21278 = VERTEX_POINT('',#21279); +#21279 = CARTESIAN_POINT('',(-0.16,-7.46,-3.)); +#21280 = LINE('',#21281,#21282); +#21281 = CARTESIAN_POINT('',(-0.16,-7.46,-3.)); +#21282 = VECTOR('',#21283,1.); +#21283 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#21284 = ORIENTED_EDGE('',*,*,#20510,.T.); +#21285 = ORIENTED_EDGE('',*,*,#21255,.T.); +#21286 = ORIENTED_EDGE('',*,*,#21287,.F.); +#21287 = EDGE_CURVE('',#21278,#21256,#21288,.T.); +#21288 = LINE('',#21289,#21290); +#21289 = CARTESIAN_POINT('',(-0.32,-7.46,-3.)); +#21290 = VECTOR('',#21291,1.); +#21291 = DIRECTION('',(1.,0.,0.)); +#21292 = PLANE('',#21293); +#21293 = AXIS2_PLACEMENT_3D('',#21294,#21295,#21296); +#21294 = CARTESIAN_POINT('',(-0.32,-7.38,-2.92)); +#21295 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#21296 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#21297 = ADVANCED_FACE('',(#21298),#21316,.T.); +#21298 = FACE_BOUND('',#21299,.T.); +#21299 = EDGE_LOOP('',(#21300,#21308,#21309,#21310)); +#21300 = ORIENTED_EDGE('',*,*,#21301,.F.); +#21301 = EDGE_CURVE('',#20534,#21302,#21304,.T.); +#21302 = VERTEX_POINT('',#21303); +#21303 = CARTESIAN_POINT('',(-0.16,-7.78,-3.)); +#21304 = LINE('',#21305,#21306); +#21305 = CARTESIAN_POINT('',(-0.266666666667,-7.886666666667, + -2.893333333333)); +#21306 = VECTOR('',#21307,1.); +#21307 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#21308 = ORIENTED_EDGE('',*,*,#20541,.T.); +#21309 = ORIENTED_EDGE('',*,*,#21277,.T.); +#21310 = ORIENTED_EDGE('',*,*,#21311,.F.); +#21311 = EDGE_CURVE('',#21302,#21278,#21312,.T.); +#21312 = LINE('',#21313,#21314); +#21313 = CARTESIAN_POINT('',(-0.16,-7.94,-3.)); +#21314 = VECTOR('',#21315,1.); +#21315 = DIRECTION('',(0.,1.,0.)); +#21316 = PLANE('',#21317); +#21317 = AXIS2_PLACEMENT_3D('',#21318,#21319,#21320); +#21318 = CARTESIAN_POINT('',(-0.24,-7.94,-2.92)); +#21319 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#21320 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#21321 = ADVANCED_FACE('',(#21322),#21333,.T.); +#21322 = FACE_BOUND('',#21323,.F.); +#21323 = EDGE_LOOP('',(#21324,#21325,#21326,#21327)); +#21324 = ORIENTED_EDGE('',*,*,#21301,.F.); +#21325 = ORIENTED_EDGE('',*,*,#20558,.T.); +#21326 = ORIENTED_EDGE('',*,*,#21246,.T.); +#21327 = ORIENTED_EDGE('',*,*,#21328,.F.); +#21328 = EDGE_CURVE('',#21302,#21247,#21329,.T.); +#21329 = LINE('',#21330,#21331); +#21330 = CARTESIAN_POINT('',(-0.32,-7.78,-3.)); +#21331 = VECTOR('',#21332,1.); +#21332 = DIRECTION('',(1.,0.,0.)); +#21333 = PLANE('',#21334); +#21334 = AXIS2_PLACEMENT_3D('',#21335,#21336,#21337); +#21335 = CARTESIAN_POINT('',(-0.32,-7.86,-2.92)); +#21336 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#21337 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#21338 = ADVANCED_FACE('',(#21339),#21364,.F.); +#21339 = FACE_BOUND('',#21340,.F.); +#21340 = EDGE_LOOP('',(#21341,#21349,#21350,#21358)); +#21341 = ORIENTED_EDGE('',*,*,#21342,.F.); +#21342 = EDGE_CURVE('',#20575,#21343,#21345,.T.); +#21343 = VERTEX_POINT('',#21344); +#21344 = CARTESIAN_POINT('',(0.16,-0.16,-3.)); +#21345 = LINE('',#21346,#21347); +#21346 = CARTESIAN_POINT('',(0.16,-0.16,-3.)); +#21347 = VECTOR('',#21348,1.); +#21348 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#21349 = ORIENTED_EDGE('',*,*,#20582,.T.); +#21350 = ORIENTED_EDGE('',*,*,#21351,.T.); +#21351 = EDGE_CURVE('',#20583,#21352,#21354,.T.); +#21352 = VERTEX_POINT('',#21353); +#21353 = CARTESIAN_POINT('',(0.16,0.16,-3.)); +#21354 = LINE('',#21355,#21356); +#21355 = CARTESIAN_POINT('',(5.333333333333E-02,5.333333333333E-02, + -3.106666666667)); +#21356 = VECTOR('',#21357,1.); +#21357 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#21358 = ORIENTED_EDGE('',*,*,#21359,.F.); +#21359 = EDGE_CURVE('',#21343,#21352,#21360,.T.); +#21360 = LINE('',#21361,#21362); +#21361 = CARTESIAN_POINT('',(0.16,-0.32,-3.)); +#21362 = VECTOR('',#21363,1.); +#21363 = DIRECTION('',(0.,1.,0.)); +#21364 = PLANE('',#21365); +#21365 = AXIS2_PLACEMENT_3D('',#21366,#21367,#21368); +#21366 = CARTESIAN_POINT('',(0.24,-0.32,-2.92)); +#21367 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#21368 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#21369 = ADVANCED_FACE('',(#21370),#21388,.F.); +#21370 = FACE_BOUND('',#21371,.T.); +#21371 = EDGE_LOOP('',(#21372,#21380,#21381,#21382)); +#21372 = ORIENTED_EDGE('',*,*,#21373,.F.); +#21373 = EDGE_CURVE('',#20607,#21374,#21376,.T.); +#21374 = VERTEX_POINT('',#21375); +#21375 = CARTESIAN_POINT('',(-0.16,0.16,-3.)); +#21376 = LINE('',#21377,#21378); +#21377 = CARTESIAN_POINT('',(-0.16,0.16,-3.)); +#21378 = VECTOR('',#21379,1.); +#21379 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#21380 = ORIENTED_EDGE('',*,*,#20606,.T.); +#21381 = ORIENTED_EDGE('',*,*,#21351,.T.); +#21382 = ORIENTED_EDGE('',*,*,#21383,.F.); +#21383 = EDGE_CURVE('',#21374,#21352,#21384,.T.); +#21384 = LINE('',#21385,#21386); +#21385 = CARTESIAN_POINT('',(-0.32,0.16,-3.)); +#21386 = VECTOR('',#21387,1.); +#21387 = DIRECTION('',(1.,0.,0.)); +#21388 = PLANE('',#21389); +#21389 = AXIS2_PLACEMENT_3D('',#21390,#21391,#21392); +#21390 = CARTESIAN_POINT('',(-0.32,0.24,-2.92)); +#21391 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#21392 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#21393 = ADVANCED_FACE('',(#21394),#21412,.T.); +#21394 = FACE_BOUND('',#21395,.T.); +#21395 = EDGE_LOOP('',(#21396,#21404,#21405,#21406)); +#21396 = ORIENTED_EDGE('',*,*,#21397,.F.); +#21397 = EDGE_CURVE('',#20630,#21398,#21400,.T.); +#21398 = VERTEX_POINT('',#21399); +#21399 = CARTESIAN_POINT('',(-0.16,-0.16,-3.)); +#21400 = LINE('',#21401,#21402); +#21401 = CARTESIAN_POINT('',(-0.266666666667,-0.266666666667, + -2.893333333333)); +#21402 = VECTOR('',#21403,1.); +#21403 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#21404 = ORIENTED_EDGE('',*,*,#20637,.T.); +#21405 = ORIENTED_EDGE('',*,*,#21373,.T.); +#21406 = ORIENTED_EDGE('',*,*,#21407,.F.); +#21407 = EDGE_CURVE('',#21398,#21374,#21408,.T.); +#21408 = LINE('',#21409,#21410); +#21409 = CARTESIAN_POINT('',(-0.16,-0.32,-3.)); +#21410 = VECTOR('',#21411,1.); +#21411 = DIRECTION('',(0.,1.,0.)); +#21412 = PLANE('',#21413); +#21413 = AXIS2_PLACEMENT_3D('',#21414,#21415,#21416); +#21414 = CARTESIAN_POINT('',(-0.24,-0.32,-2.92)); +#21415 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#21416 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#21417 = ADVANCED_FACE('',(#21418),#21429,.T.); +#21418 = FACE_BOUND('',#21419,.F.); +#21419 = EDGE_LOOP('',(#21420,#21421,#21422,#21423)); +#21420 = ORIENTED_EDGE('',*,*,#21397,.F.); +#21421 = ORIENTED_EDGE('',*,*,#20654,.T.); +#21422 = ORIENTED_EDGE('',*,*,#21342,.T.); +#21423 = ORIENTED_EDGE('',*,*,#21424,.F.); +#21424 = EDGE_CURVE('',#21398,#21343,#21425,.T.); +#21425 = LINE('',#21426,#21427); +#21426 = CARTESIAN_POINT('',(-0.32,-0.16,-3.)); +#21427 = VECTOR('',#21428,1.); +#21428 = DIRECTION('',(1.,0.,0.)); +#21429 = PLANE('',#21430); +#21430 = AXIS2_PLACEMENT_3D('',#21431,#21432,#21433); +#21431 = CARTESIAN_POINT('',(-0.32,-0.24,-2.92)); +#21432 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#21433 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#21434 = ADVANCED_FACE('',(#21435),#21460,.F.); +#21435 = FACE_BOUND('',#21436,.T.); +#21436 = EDGE_LOOP('',(#21437,#21445,#21446,#21454)); +#21437 = ORIENTED_EDGE('',*,*,#21438,.F.); +#21438 = EDGE_CURVE('',#20679,#21439,#21441,.T.); +#21439 = VERTEX_POINT('',#21440); +#21440 = CARTESIAN_POINT('',(-0.16,-2.38,-3.)); +#21441 = LINE('',#21442,#21443); +#21442 = CARTESIAN_POINT('',(-0.16,-2.38,-3.)); +#21443 = VECTOR('',#21444,1.); +#21444 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#21445 = ORIENTED_EDGE('',*,*,#20678,.T.); +#21446 = ORIENTED_EDGE('',*,*,#21447,.T.); +#21447 = EDGE_CURVE('',#20671,#21448,#21450,.T.); +#21448 = VERTEX_POINT('',#21449); +#21449 = CARTESIAN_POINT('',(0.16,-2.38,-3.)); +#21450 = LINE('',#21451,#21452); +#21451 = CARTESIAN_POINT('',(5.333333333333E-02,-2.486666666667, + -3.106666666667)); +#21452 = VECTOR('',#21453,1.); +#21453 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#21454 = ORIENTED_EDGE('',*,*,#21455,.F.); +#21455 = EDGE_CURVE('',#21439,#21448,#21456,.T.); +#21456 = LINE('',#21457,#21458); +#21457 = CARTESIAN_POINT('',(-0.32,-2.38,-3.)); +#21458 = VECTOR('',#21459,1.); +#21459 = DIRECTION('',(1.,0.,0.)); +#21460 = PLANE('',#21461); +#21461 = AXIS2_PLACEMENT_3D('',#21462,#21463,#21464); +#21462 = CARTESIAN_POINT('',(-0.32,-2.3,-2.92)); +#21463 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#21464 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#21465 = ADVANCED_FACE('',(#21466),#21484,.T.); +#21466 = FACE_BOUND('',#21467,.T.); +#21467 = EDGE_LOOP('',(#21468,#21476,#21477,#21478)); +#21468 = ORIENTED_EDGE('',*,*,#21469,.F.); +#21469 = EDGE_CURVE('',#20702,#21470,#21472,.T.); +#21470 = VERTEX_POINT('',#21471); +#21471 = CARTESIAN_POINT('',(-0.16,-2.7,-3.)); +#21472 = LINE('',#21473,#21474); +#21473 = CARTESIAN_POINT('',(-0.266666666667,-2.806666666667, + -2.893333333333)); +#21474 = VECTOR('',#21475,1.); +#21475 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#21476 = ORIENTED_EDGE('',*,*,#20709,.T.); +#21477 = ORIENTED_EDGE('',*,*,#21438,.T.); +#21478 = ORIENTED_EDGE('',*,*,#21479,.F.); +#21479 = EDGE_CURVE('',#21470,#21439,#21480,.T.); +#21480 = LINE('',#21481,#21482); +#21481 = CARTESIAN_POINT('',(-0.16,-2.86,-3.)); +#21482 = VECTOR('',#21483,1.); +#21483 = DIRECTION('',(0.,1.,0.)); +#21484 = PLANE('',#21485); +#21485 = AXIS2_PLACEMENT_3D('',#21486,#21487,#21488); +#21486 = CARTESIAN_POINT('',(-0.24,-2.86,-2.92)); +#21487 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#21488 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#21489 = ADVANCED_FACE('',(#21490),#21508,.T.); +#21490 = FACE_BOUND('',#21491,.F.); +#21491 = EDGE_LOOP('',(#21492,#21493,#21494,#21502)); +#21492 = ORIENTED_EDGE('',*,*,#21469,.F.); +#21493 = ORIENTED_EDGE('',*,*,#20733,.T.); +#21494 = ORIENTED_EDGE('',*,*,#21495,.T.); +#21495 = EDGE_CURVE('',#20726,#21496,#21498,.T.); +#21496 = VERTEX_POINT('',#21497); +#21497 = CARTESIAN_POINT('',(0.16,-2.7,-3.)); +#21498 = LINE('',#21499,#21500); +#21499 = CARTESIAN_POINT('',(0.16,-2.7,-3.)); +#21500 = VECTOR('',#21501,1.); +#21501 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#21502 = ORIENTED_EDGE('',*,*,#21503,.F.); +#21503 = EDGE_CURVE('',#21470,#21496,#21504,.T.); +#21504 = LINE('',#21505,#21506); +#21505 = CARTESIAN_POINT('',(-0.32,-2.7,-3.)); +#21506 = VECTOR('',#21507,1.); +#21507 = DIRECTION('',(1.,0.,0.)); +#21508 = PLANE('',#21509); +#21509 = AXIS2_PLACEMENT_3D('',#21510,#21511,#21512); +#21510 = CARTESIAN_POINT('',(-0.32,-2.78,-2.92)); +#21511 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#21512 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#21513 = ADVANCED_FACE('',(#21514),#21525,.F.); +#21514 = FACE_BOUND('',#21515,.F.); +#21515 = EDGE_LOOP('',(#21516,#21517,#21518,#21519)); +#21516 = ORIENTED_EDGE('',*,*,#21495,.F.); +#21517 = ORIENTED_EDGE('',*,*,#20750,.T.); +#21518 = ORIENTED_EDGE('',*,*,#21447,.T.); +#21519 = ORIENTED_EDGE('',*,*,#21520,.F.); +#21520 = EDGE_CURVE('',#21496,#21448,#21521,.T.); +#21521 = LINE('',#21522,#21523); +#21522 = CARTESIAN_POINT('',(0.16,-2.86,-3.)); +#21523 = VECTOR('',#21524,1.); +#21524 = DIRECTION('',(0.,1.,0.)); +#21525 = PLANE('',#21526); +#21526 = AXIS2_PLACEMENT_3D('',#21527,#21528,#21529); +#21527 = CARTESIAN_POINT('',(0.24,-2.86,-2.92)); +#21528 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#21529 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#21530 = ADVANCED_FACE('',(#21531),#21556,.T.); +#21531 = FACE_BOUND('',#21532,.F.); +#21532 = EDGE_LOOP('',(#21533,#21541,#21542,#21550)); +#21533 = ORIENTED_EDGE('',*,*,#21534,.F.); +#21534 = EDGE_CURVE('',#20776,#21535,#21537,.T.); +#21535 = VERTEX_POINT('',#21536); +#21536 = CARTESIAN_POINT('',(-0.16,-4.92,8.54)); +#21537 = LINE('',#21538,#21539); +#21538 = CARTESIAN_POINT('',(-0.16,-4.92,8.54)); +#21539 = VECTOR('',#21540,1.); +#21540 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#21541 = ORIENTED_EDGE('',*,*,#20783,.T.); +#21542 = ORIENTED_EDGE('',*,*,#21543,.T.); +#21543 = EDGE_CURVE('',#20767,#21544,#21546,.T.); +#21544 = VERTEX_POINT('',#21545); +#21545 = CARTESIAN_POINT('',(0.16,-4.92,8.54)); +#21546 = LINE('',#21547,#21548); +#21547 = CARTESIAN_POINT('',(5.333333333333E-02,-5.026666666667, + 8.646666666667)); +#21548 = VECTOR('',#21549,1.); +#21549 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#21550 = ORIENTED_EDGE('',*,*,#21551,.F.); +#21551 = EDGE_CURVE('',#21535,#21544,#21552,.T.); +#21552 = LINE('',#21553,#21554); +#21553 = CARTESIAN_POINT('',(-0.32,-4.92,8.54)); +#21554 = VECTOR('',#21555,1.); +#21555 = DIRECTION('',(1.,0.,0.)); +#21556 = PLANE('',#21557); +#21557 = AXIS2_PLACEMENT_3D('',#21558,#21559,#21560); +#21558 = CARTESIAN_POINT('',(-0.32,-4.84,8.46)); +#21559 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#21560 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#21561 = ADVANCED_FACE('',(#21562),#21580,.F.); +#21562 = FACE_BOUND('',#21563,.F.); +#21563 = EDGE_LOOP('',(#21564,#21572,#21573,#21574)); +#21564 = ORIENTED_EDGE('',*,*,#21565,.F.); +#21565 = EDGE_CURVE('',#20798,#21566,#21568,.T.); +#21566 = VERTEX_POINT('',#21567); +#21567 = CARTESIAN_POINT('',(-0.16,-5.24,8.54)); +#21568 = LINE('',#21569,#21570); +#21569 = CARTESIAN_POINT('',(-0.266666666667,-5.346666666667, + 8.433333333333)); +#21570 = VECTOR('',#21571,1.); +#21571 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#21572 = ORIENTED_EDGE('',*,*,#20807,.T.); +#21573 = ORIENTED_EDGE('',*,*,#21534,.T.); +#21574 = ORIENTED_EDGE('',*,*,#21575,.F.); +#21575 = EDGE_CURVE('',#21566,#21535,#21576,.T.); +#21576 = LINE('',#21577,#21578); +#21577 = CARTESIAN_POINT('',(-0.16,-5.4,8.54)); +#21578 = VECTOR('',#21579,1.); +#21579 = DIRECTION('',(0.,1.,0.)); +#21580 = PLANE('',#21581); +#21581 = AXIS2_PLACEMENT_3D('',#21582,#21583,#21584); +#21582 = CARTESIAN_POINT('',(-0.24,-5.4,8.46)); +#21583 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#21584 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#21585 = ADVANCED_FACE('',(#21586),#21604,.F.); +#21586 = FACE_BOUND('',#21587,.T.); +#21587 = EDGE_LOOP('',(#21588,#21589,#21590,#21598)); +#21588 = ORIENTED_EDGE('',*,*,#21565,.F.); +#21589 = ORIENTED_EDGE('',*,*,#20831,.T.); +#21590 = ORIENTED_EDGE('',*,*,#21591,.T.); +#21591 = EDGE_CURVE('',#20822,#21592,#21594,.T.); +#21592 = VERTEX_POINT('',#21593); +#21593 = CARTESIAN_POINT('',(0.16,-5.24,8.54)); +#21594 = LINE('',#21595,#21596); +#21595 = CARTESIAN_POINT('',(0.16,-5.24,8.54)); +#21596 = VECTOR('',#21597,1.); +#21597 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#21598 = ORIENTED_EDGE('',*,*,#21599,.F.); +#21599 = EDGE_CURVE('',#21566,#21592,#21600,.T.); +#21600 = LINE('',#21601,#21602); +#21601 = CARTESIAN_POINT('',(-0.32,-5.24,8.54)); +#21602 = VECTOR('',#21603,1.); +#21603 = DIRECTION('',(1.,0.,0.)); +#21604 = PLANE('',#21605); +#21605 = AXIS2_PLACEMENT_3D('',#21606,#21607,#21608); +#21606 = CARTESIAN_POINT('',(-0.32,-5.32,8.46)); +#21607 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#21608 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#21609 = ADVANCED_FACE('',(#21610),#21621,.T.); +#21610 = FACE_BOUND('',#21611,.T.); +#21611 = EDGE_LOOP('',(#21612,#21613,#21614,#21615)); +#21612 = ORIENTED_EDGE('',*,*,#21591,.F.); +#21613 = ORIENTED_EDGE('',*,*,#20848,.T.); +#21614 = ORIENTED_EDGE('',*,*,#21543,.T.); +#21615 = ORIENTED_EDGE('',*,*,#21616,.F.); +#21616 = EDGE_CURVE('',#21592,#21544,#21617,.T.); +#21617 = LINE('',#21618,#21619); +#21618 = CARTESIAN_POINT('',(0.16,-5.4,8.54)); +#21619 = VECTOR('',#21620,1.); +#21620 = DIRECTION('',(0.,1.,0.)); +#21621 = PLANE('',#21622); +#21622 = AXIS2_PLACEMENT_3D('',#21623,#21624,#21625); +#21623 = CARTESIAN_POINT('',(0.24,-5.4,8.46)); +#21624 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#21625 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#21626 = ADVANCED_FACE('',(#21627),#21652,.T.); +#21627 = FACE_BOUND('',#21628,.T.); +#21628 = EDGE_LOOP('',(#21629,#21637,#21638,#21646)); +#21629 = ORIENTED_EDGE('',*,*,#21630,.F.); +#21630 = EDGE_CURVE('',#20863,#21631,#21633,.T.); +#21631 = VERTEX_POINT('',#21632); +#21632 = CARTESIAN_POINT('',(0.16,-7.78,8.54)); +#21633 = LINE('',#21634,#21635); +#21634 = CARTESIAN_POINT('',(0.16,-7.78,8.54)); +#21635 = VECTOR('',#21636,1.); +#21636 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#21637 = ORIENTED_EDGE('',*,*,#20879,.T.); +#21638 = ORIENTED_EDGE('',*,*,#21639,.T.); +#21639 = EDGE_CURVE('',#20872,#21640,#21642,.T.); +#21640 = VERTEX_POINT('',#21641); +#21641 = CARTESIAN_POINT('',(0.16,-7.46,8.54)); +#21642 = LINE('',#21643,#21644); +#21643 = CARTESIAN_POINT('',(5.333333333333E-02,-7.566666666667, + 8.646666666667)); +#21644 = VECTOR('',#21645,1.); +#21645 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#21646 = ORIENTED_EDGE('',*,*,#21647,.F.); +#21647 = EDGE_CURVE('',#21631,#21640,#21648,.T.); +#21648 = LINE('',#21649,#21650); +#21649 = CARTESIAN_POINT('',(0.16,-7.94,8.54)); +#21650 = VECTOR('',#21651,1.); +#21651 = DIRECTION('',(0.,1.,0.)); +#21652 = PLANE('',#21653); +#21653 = AXIS2_PLACEMENT_3D('',#21654,#21655,#21656); +#21654 = CARTESIAN_POINT('',(0.24,-7.94,8.46)); +#21655 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#21656 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#21657 = ADVANCED_FACE('',(#21658),#21676,.T.); +#21658 = FACE_BOUND('',#21659,.F.); +#21659 = EDGE_LOOP('',(#21660,#21668,#21669,#21670)); +#21660 = ORIENTED_EDGE('',*,*,#21661,.F.); +#21661 = EDGE_CURVE('',#20896,#21662,#21664,.T.); +#21662 = VERTEX_POINT('',#21663); +#21663 = CARTESIAN_POINT('',(-0.16,-7.46,8.54)); +#21664 = LINE('',#21665,#21666); +#21665 = CARTESIAN_POINT('',(-0.16,-7.46,8.54)); +#21666 = VECTOR('',#21667,1.); +#21667 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#21668 = ORIENTED_EDGE('',*,*,#20903,.T.); +#21669 = ORIENTED_EDGE('',*,*,#21639,.T.); +#21670 = ORIENTED_EDGE('',*,*,#21671,.F.); +#21671 = EDGE_CURVE('',#21662,#21640,#21672,.T.); +#21672 = LINE('',#21673,#21674); +#21673 = CARTESIAN_POINT('',(-0.32,-7.46,8.54)); +#21674 = VECTOR('',#21675,1.); +#21675 = DIRECTION('',(1.,0.,0.)); +#21676 = PLANE('',#21677); +#21677 = AXIS2_PLACEMENT_3D('',#21678,#21679,#21680); +#21678 = CARTESIAN_POINT('',(-0.32,-7.38,8.46)); +#21679 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#21680 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#21681 = ADVANCED_FACE('',(#21682),#21700,.F.); +#21682 = FACE_BOUND('',#21683,.F.); +#21683 = EDGE_LOOP('',(#21684,#21692,#21693,#21694)); +#21684 = ORIENTED_EDGE('',*,*,#21685,.F.); +#21685 = EDGE_CURVE('',#20918,#21686,#21688,.T.); +#21686 = VERTEX_POINT('',#21687); +#21687 = CARTESIAN_POINT('',(-0.16,-7.78,8.54)); +#21688 = LINE('',#21689,#21690); +#21689 = CARTESIAN_POINT('',(-0.266666666667,-7.886666666667, + 8.433333333333)); +#21690 = VECTOR('',#21691,1.); +#21691 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#21692 = ORIENTED_EDGE('',*,*,#20927,.T.); +#21693 = ORIENTED_EDGE('',*,*,#21661,.T.); +#21694 = ORIENTED_EDGE('',*,*,#21695,.F.); +#21695 = EDGE_CURVE('',#21686,#21662,#21696,.T.); +#21696 = LINE('',#21697,#21698); +#21697 = CARTESIAN_POINT('',(-0.16,-7.94,8.54)); +#21698 = VECTOR('',#21699,1.); +#21699 = DIRECTION('',(0.,1.,0.)); +#21700 = PLANE('',#21701); +#21701 = AXIS2_PLACEMENT_3D('',#21702,#21703,#21704); +#21702 = CARTESIAN_POINT('',(-0.24,-7.94,8.46)); +#21703 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#21704 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#21705 = ADVANCED_FACE('',(#21706),#21717,.F.); +#21706 = FACE_BOUND('',#21707,.T.); +#21707 = EDGE_LOOP('',(#21708,#21709,#21710,#21711)); +#21708 = ORIENTED_EDGE('',*,*,#21685,.F.); +#21709 = ORIENTED_EDGE('',*,*,#20944,.T.); +#21710 = ORIENTED_EDGE('',*,*,#21630,.T.); +#21711 = ORIENTED_EDGE('',*,*,#21712,.F.); +#21712 = EDGE_CURVE('',#21686,#21631,#21713,.T.); +#21713 = LINE('',#21714,#21715); +#21714 = CARTESIAN_POINT('',(-0.32,-7.78,8.54)); +#21715 = VECTOR('',#21716,1.); +#21716 = DIRECTION('',(1.,0.,0.)); +#21717 = PLANE('',#21718); +#21718 = AXIS2_PLACEMENT_3D('',#21719,#21720,#21721); +#21719 = CARTESIAN_POINT('',(-0.32,-7.86,8.46)); +#21720 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#21721 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#21722 = ADVANCED_FACE('',(#21723),#21748,.T.); +#21723 = FACE_BOUND('',#21724,.T.); +#21724 = EDGE_LOOP('',(#21725,#21733,#21734,#21742)); +#21725 = ORIENTED_EDGE('',*,*,#21726,.F.); +#21726 = EDGE_CURVE('',#20959,#21727,#21729,.T.); +#21727 = VERTEX_POINT('',#21728); +#21728 = CARTESIAN_POINT('',(0.16,-0.16,8.54)); +#21729 = LINE('',#21730,#21731); +#21730 = CARTESIAN_POINT('',(0.16,-0.16,8.54)); +#21731 = VECTOR('',#21732,1.); +#21732 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#21733 = ORIENTED_EDGE('',*,*,#20975,.T.); +#21734 = ORIENTED_EDGE('',*,*,#21735,.T.); +#21735 = EDGE_CURVE('',#20968,#21736,#21738,.T.); +#21736 = VERTEX_POINT('',#21737); +#21737 = CARTESIAN_POINT('',(0.16,0.16,8.54)); +#21738 = LINE('',#21739,#21740); +#21739 = CARTESIAN_POINT('',(5.333333333333E-02,5.333333333333E-02, + 8.646666666667)); +#21740 = VECTOR('',#21741,1.); +#21741 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#21742 = ORIENTED_EDGE('',*,*,#21743,.F.); +#21743 = EDGE_CURVE('',#21727,#21736,#21744,.T.); +#21744 = LINE('',#21745,#21746); +#21745 = CARTESIAN_POINT('',(0.16,-0.32,8.54)); +#21746 = VECTOR('',#21747,1.); +#21747 = DIRECTION('',(0.,1.,0.)); +#21748 = PLANE('',#21749); +#21749 = AXIS2_PLACEMENT_3D('',#21750,#21751,#21752); +#21750 = CARTESIAN_POINT('',(0.24,-0.32,8.46)); +#21751 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#21752 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#21753 = ADVANCED_FACE('',(#21754),#21772,.T.); +#21754 = FACE_BOUND('',#21755,.F.); +#21755 = EDGE_LOOP('',(#21756,#21764,#21765,#21766)); +#21756 = ORIENTED_EDGE('',*,*,#21757,.F.); +#21757 = EDGE_CURVE('',#20992,#21758,#21760,.T.); +#21758 = VERTEX_POINT('',#21759); +#21759 = CARTESIAN_POINT('',(-0.16,0.16,8.54)); +#21760 = LINE('',#21761,#21762); +#21761 = CARTESIAN_POINT('',(-0.16,0.16,8.54)); +#21762 = VECTOR('',#21763,1.); +#21763 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#21764 = ORIENTED_EDGE('',*,*,#20999,.T.); +#21765 = ORIENTED_EDGE('',*,*,#21735,.T.); +#21766 = ORIENTED_EDGE('',*,*,#21767,.F.); +#21767 = EDGE_CURVE('',#21758,#21736,#21768,.T.); +#21768 = LINE('',#21769,#21770); +#21769 = CARTESIAN_POINT('',(-0.32,0.16,8.54)); +#21770 = VECTOR('',#21771,1.); +#21771 = DIRECTION('',(1.,0.,0.)); +#21772 = PLANE('',#21773); +#21773 = AXIS2_PLACEMENT_3D('',#21774,#21775,#21776); +#21774 = CARTESIAN_POINT('',(-0.32,0.24,8.46)); +#21775 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#21776 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#21777 = ADVANCED_FACE('',(#21778),#21796,.F.); +#21778 = FACE_BOUND('',#21779,.F.); +#21779 = EDGE_LOOP('',(#21780,#21788,#21789,#21790)); +#21780 = ORIENTED_EDGE('',*,*,#21781,.F.); +#21781 = EDGE_CURVE('',#21014,#21782,#21784,.T.); +#21782 = VERTEX_POINT('',#21783); +#21783 = CARTESIAN_POINT('',(-0.16,-0.16,8.54)); +#21784 = LINE('',#21785,#21786); +#21785 = CARTESIAN_POINT('',(-0.266666666667,-0.266666666667, + 8.433333333333)); +#21786 = VECTOR('',#21787,1.); +#21787 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#21788 = ORIENTED_EDGE('',*,*,#21023,.T.); +#21789 = ORIENTED_EDGE('',*,*,#21757,.T.); +#21790 = ORIENTED_EDGE('',*,*,#21791,.F.); +#21791 = EDGE_CURVE('',#21782,#21758,#21792,.T.); +#21792 = LINE('',#21793,#21794); +#21793 = CARTESIAN_POINT('',(-0.16,-0.32,8.54)); +#21794 = VECTOR('',#21795,1.); +#21795 = DIRECTION('',(0.,1.,0.)); +#21796 = PLANE('',#21797); +#21797 = AXIS2_PLACEMENT_3D('',#21798,#21799,#21800); +#21798 = CARTESIAN_POINT('',(-0.24,-0.32,8.46)); +#21799 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#21800 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#21801 = ADVANCED_FACE('',(#21802),#21813,.F.); +#21802 = FACE_BOUND('',#21803,.T.); +#21803 = EDGE_LOOP('',(#21804,#21805,#21806,#21807)); +#21804 = ORIENTED_EDGE('',*,*,#21781,.F.); +#21805 = ORIENTED_EDGE('',*,*,#21040,.T.); +#21806 = ORIENTED_EDGE('',*,*,#21726,.T.); +#21807 = ORIENTED_EDGE('',*,*,#21808,.F.); +#21808 = EDGE_CURVE('',#21782,#21727,#21809,.T.); +#21809 = LINE('',#21810,#21811); +#21810 = CARTESIAN_POINT('',(-0.32,-0.16,8.54)); +#21811 = VECTOR('',#21812,1.); +#21812 = DIRECTION('',(1.,0.,0.)); +#21813 = PLANE('',#21814); +#21814 = AXIS2_PLACEMENT_3D('',#21815,#21816,#21817); +#21815 = CARTESIAN_POINT('',(-0.32,-0.24,8.46)); +#21816 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#21817 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#21818 = ADVANCED_FACE('',(#21819),#21844,.T.); +#21819 = FACE_BOUND('',#21820,.F.); +#21820 = EDGE_LOOP('',(#21821,#21829,#21830,#21838)); +#21821 = ORIENTED_EDGE('',*,*,#21822,.F.); +#21822 = EDGE_CURVE('',#21064,#21823,#21825,.T.); +#21823 = VERTEX_POINT('',#21824); +#21824 = CARTESIAN_POINT('',(-0.16,-2.38,8.54)); +#21825 = LINE('',#21826,#21827); +#21826 = CARTESIAN_POINT('',(-0.16,-2.38,8.54)); +#21827 = VECTOR('',#21828,1.); +#21828 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#21829 = ORIENTED_EDGE('',*,*,#21071,.T.); +#21830 = ORIENTED_EDGE('',*,*,#21831,.T.); +#21831 = EDGE_CURVE('',#21055,#21832,#21834,.T.); +#21832 = VERTEX_POINT('',#21833); +#21833 = CARTESIAN_POINT('',(0.16,-2.38,8.54)); +#21834 = LINE('',#21835,#21836); +#21835 = CARTESIAN_POINT('',(5.333333333333E-02,-2.486666666667, + 8.646666666667)); +#21836 = VECTOR('',#21837,1.); +#21837 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#21838 = ORIENTED_EDGE('',*,*,#21839,.F.); +#21839 = EDGE_CURVE('',#21823,#21832,#21840,.T.); +#21840 = LINE('',#21841,#21842); +#21841 = CARTESIAN_POINT('',(-0.32,-2.38,8.54)); +#21842 = VECTOR('',#21843,1.); +#21843 = DIRECTION('',(1.,0.,0.)); +#21844 = PLANE('',#21845); +#21845 = AXIS2_PLACEMENT_3D('',#21846,#21847,#21848); +#21846 = CARTESIAN_POINT('',(-0.32,-2.3,8.46)); +#21847 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#21848 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#21849 = ADVANCED_FACE('',(#21850),#21868,.F.); +#21850 = FACE_BOUND('',#21851,.F.); +#21851 = EDGE_LOOP('',(#21852,#21860,#21861,#21862)); +#21852 = ORIENTED_EDGE('',*,*,#21853,.F.); +#21853 = EDGE_CURVE('',#21086,#21854,#21856,.T.); +#21854 = VERTEX_POINT('',#21855); +#21855 = CARTESIAN_POINT('',(-0.16,-2.7,8.54)); +#21856 = LINE('',#21857,#21858); +#21857 = CARTESIAN_POINT('',(-0.266666666667,-2.806666666667, + 8.433333333333)); +#21858 = VECTOR('',#21859,1.); +#21859 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#21860 = ORIENTED_EDGE('',*,*,#21095,.T.); +#21861 = ORIENTED_EDGE('',*,*,#21822,.T.); +#21862 = ORIENTED_EDGE('',*,*,#21863,.F.); +#21863 = EDGE_CURVE('',#21854,#21823,#21864,.T.); +#21864 = LINE('',#21865,#21866); +#21865 = CARTESIAN_POINT('',(-0.16,-2.86,8.54)); +#21866 = VECTOR('',#21867,1.); +#21867 = DIRECTION('',(0.,1.,0.)); +#21868 = PLANE('',#21869); +#21869 = AXIS2_PLACEMENT_3D('',#21870,#21871,#21872); +#21870 = CARTESIAN_POINT('',(-0.24,-2.86,8.46)); +#21871 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#21872 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#21873 = ADVANCED_FACE('',(#21874),#21892,.F.); +#21874 = FACE_BOUND('',#21875,.T.); +#21875 = EDGE_LOOP('',(#21876,#21877,#21878,#21886)); +#21876 = ORIENTED_EDGE('',*,*,#21853,.F.); +#21877 = ORIENTED_EDGE('',*,*,#21119,.T.); +#21878 = ORIENTED_EDGE('',*,*,#21879,.T.); +#21879 = EDGE_CURVE('',#21110,#21880,#21882,.T.); +#21880 = VERTEX_POINT('',#21881); +#21881 = CARTESIAN_POINT('',(0.16,-2.7,8.54)); +#21882 = LINE('',#21883,#21884); +#21883 = CARTESIAN_POINT('',(0.16,-2.7,8.54)); +#21884 = VECTOR('',#21885,1.); +#21885 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#21886 = ORIENTED_EDGE('',*,*,#21887,.F.); +#21887 = EDGE_CURVE('',#21854,#21880,#21888,.T.); +#21888 = LINE('',#21889,#21890); +#21889 = CARTESIAN_POINT('',(-0.32,-2.7,8.54)); +#21890 = VECTOR('',#21891,1.); +#21891 = DIRECTION('',(1.,0.,0.)); +#21892 = PLANE('',#21893); +#21893 = AXIS2_PLACEMENT_3D('',#21894,#21895,#21896); +#21894 = CARTESIAN_POINT('',(-0.32,-2.78,8.46)); +#21895 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#21896 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#21897 = ADVANCED_FACE('',(#21898),#21909,.T.); +#21898 = FACE_BOUND('',#21899,.T.); +#21899 = EDGE_LOOP('',(#21900,#21901,#21902,#21903)); +#21900 = ORIENTED_EDGE('',*,*,#21879,.F.); +#21901 = ORIENTED_EDGE('',*,*,#21136,.T.); +#21902 = ORIENTED_EDGE('',*,*,#21831,.T.); +#21903 = ORIENTED_EDGE('',*,*,#21904,.F.); +#21904 = EDGE_CURVE('',#21880,#21832,#21905,.T.); +#21905 = LINE('',#21906,#21907); +#21906 = CARTESIAN_POINT('',(0.16,-2.86,8.54)); +#21907 = VECTOR('',#21908,1.); +#21908 = DIRECTION('',(0.,1.,0.)); +#21909 = PLANE('',#21910); +#21910 = AXIS2_PLACEMENT_3D('',#21911,#21912,#21913); +#21911 = CARTESIAN_POINT('',(0.24,-2.86,8.46)); +#21912 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#21913 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#21914 = ADVANCED_FACE('',(#21915),#21921,.F.); +#21915 = FACE_BOUND('',#21916,.F.); +#21916 = EDGE_LOOP('',(#21917,#21918,#21919,#21920)); +#21917 = ORIENTED_EDGE('',*,*,#21232,.T.); +#21918 = ORIENTED_EDGE('',*,*,#21167,.F.); +#21919 = ORIENTED_EDGE('',*,*,#21191,.F.); +#21920 = ORIENTED_EDGE('',*,*,#21215,.T.); +#21921 = PLANE('',#21922); +#21922 = AXIS2_PLACEMENT_3D('',#21923,#21924,#21925); +#21923 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#21924 = DIRECTION('',(0.,0.,1.)); +#21925 = DIRECTION('',(1.,0.,-0.)); +#21926 = ADVANCED_FACE('',(#21927),#21933,.F.); +#21927 = FACE_BOUND('',#21928,.F.); +#21928 = EDGE_LOOP('',(#21929,#21930,#21931,#21932)); +#21929 = ORIENTED_EDGE('',*,*,#21263,.T.); +#21930 = ORIENTED_EDGE('',*,*,#21287,.F.); +#21931 = ORIENTED_EDGE('',*,*,#21311,.F.); +#21932 = ORIENTED_EDGE('',*,*,#21328,.T.); +#21933 = PLANE('',#21934); +#21934 = AXIS2_PLACEMENT_3D('',#21935,#21936,#21937); +#21935 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#21936 = DIRECTION('',(0.,0.,1.)); +#21937 = DIRECTION('',(1.,0.,-0.)); +#21938 = ADVANCED_FACE('',(#21939),#21945,.F.); +#21939 = FACE_BOUND('',#21940,.F.); +#21940 = EDGE_LOOP('',(#21941,#21942,#21943,#21944)); +#21941 = ORIENTED_EDGE('',*,*,#21359,.T.); +#21942 = ORIENTED_EDGE('',*,*,#21383,.F.); +#21943 = ORIENTED_EDGE('',*,*,#21407,.F.); +#21944 = ORIENTED_EDGE('',*,*,#21424,.T.); +#21945 = PLANE('',#21946); +#21946 = AXIS2_PLACEMENT_3D('',#21947,#21948,#21949); +#21947 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#21948 = DIRECTION('',(0.,0.,1.)); +#21949 = DIRECTION('',(1.,0.,-0.)); +#21950 = ADVANCED_FACE('',(#21951),#21957,.F.); +#21951 = FACE_BOUND('',#21952,.F.); +#21952 = EDGE_LOOP('',(#21953,#21954,#21955,#21956)); +#21953 = ORIENTED_EDGE('',*,*,#21520,.T.); +#21954 = ORIENTED_EDGE('',*,*,#21455,.F.); +#21955 = ORIENTED_EDGE('',*,*,#21479,.F.); +#21956 = ORIENTED_EDGE('',*,*,#21503,.T.); +#21957 = PLANE('',#21958); +#21958 = AXIS2_PLACEMENT_3D('',#21959,#21960,#21961); +#21959 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#21960 = DIRECTION('',(0.,0.,1.)); +#21961 = DIRECTION('',(1.,0.,-0.)); +#21962 = ADVANCED_FACE('',(#21963),#21969,.T.); +#21963 = FACE_BOUND('',#21964,.T.); +#21964 = EDGE_LOOP('',(#21965,#21966,#21967,#21968)); +#21965 = ORIENTED_EDGE('',*,*,#21616,.T.); +#21966 = ORIENTED_EDGE('',*,*,#21551,.F.); +#21967 = ORIENTED_EDGE('',*,*,#21575,.F.); +#21968 = ORIENTED_EDGE('',*,*,#21599,.T.); +#21969 = PLANE('',#21970); +#21970 = AXIS2_PLACEMENT_3D('',#21971,#21972,#21973); +#21971 = CARTESIAN_POINT('',(-0.32,-5.4,8.54)); +#21972 = DIRECTION('',(0.,0.,1.)); +#21973 = DIRECTION('',(1.,0.,-0.)); +#21974 = ADVANCED_FACE('',(#21975),#21981,.T.); +#21975 = FACE_BOUND('',#21976,.T.); +#21976 = EDGE_LOOP('',(#21977,#21978,#21979,#21980)); +#21977 = ORIENTED_EDGE('',*,*,#21647,.T.); +#21978 = ORIENTED_EDGE('',*,*,#21671,.F.); +#21979 = ORIENTED_EDGE('',*,*,#21695,.F.); +#21980 = ORIENTED_EDGE('',*,*,#21712,.T.); +#21981 = PLANE('',#21982); +#21982 = AXIS2_PLACEMENT_3D('',#21983,#21984,#21985); +#21983 = CARTESIAN_POINT('',(-0.32,-7.94,8.54)); +#21984 = DIRECTION('',(0.,0.,1.)); +#21985 = DIRECTION('',(1.,0.,-0.)); +#21986 = ADVANCED_FACE('',(#21987),#21993,.T.); +#21987 = FACE_BOUND('',#21988,.T.); +#21988 = EDGE_LOOP('',(#21989,#21990,#21991,#21992)); +#21989 = ORIENTED_EDGE('',*,*,#21743,.T.); +#21990 = ORIENTED_EDGE('',*,*,#21767,.F.); +#21991 = ORIENTED_EDGE('',*,*,#21791,.F.); +#21992 = ORIENTED_EDGE('',*,*,#21808,.T.); +#21993 = PLANE('',#21994); +#21994 = AXIS2_PLACEMENT_3D('',#21995,#21996,#21997); +#21995 = CARTESIAN_POINT('',(-0.32,-0.32,8.54)); +#21996 = DIRECTION('',(0.,0.,1.)); +#21997 = DIRECTION('',(1.,0.,-0.)); +#21998 = ADVANCED_FACE('',(#21999),#22005,.T.); +#21999 = FACE_BOUND('',#22000,.T.); +#22000 = EDGE_LOOP('',(#22001,#22002,#22003,#22004)); +#22001 = ORIENTED_EDGE('',*,*,#21904,.T.); +#22002 = ORIENTED_EDGE('',*,*,#21839,.F.); +#22003 = ORIENTED_EDGE('',*,*,#21863,.F.); +#22004 = ORIENTED_EDGE('',*,*,#21887,.T.); +#22005 = PLANE('',#22006); +#22006 = AXIS2_PLACEMENT_3D('',#22007,#22008,#22009); +#22007 = CARTESIAN_POINT('',(-0.32,-2.86,8.54)); +#22008 = DIRECTION('',(0.,0.,1.)); +#22009 = DIRECTION('',(1.,0.,-0.)); +#22010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#22014)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#22011,#22012,#22013)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#22011 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#22012 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#22013 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#22014 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#22011, + 'distance_accuracy_value','confusion accuracy'); +#22015 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#22016,#22018); +#22016 = ( REPRESENTATION_RELATIONSHIP('','',#19229,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#22017) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#22017 = ITEM_DEFINED_TRANSFORMATION('','',#11,#111); +#22018 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #22019); +#22019 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('25','J8','',#5,#19224,$); +#22020 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#19226)); +#22021 = SHAPE_DEFINITION_REPRESENTATION(#22022,#22028); +#22022 = PRODUCT_DEFINITION_SHAPE('','',#22023); +#22023 = PRODUCT_DEFINITION('design','',#22024,#22027); +#22024 = PRODUCT_DEFINITION_FORMATION('','',#22025); +#22025 = PRODUCT('Converter_DCDC_RECOM_R-78E-0.5_THT', + 'Converter_DCDC_RECOM_R-78E-0.5_THT','',(#22026)); +#22026 = PRODUCT_CONTEXT('',#2,'mechanical'); +#22027 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#22028 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#22029),#22736); +#22029 = MANIFOLD_SOLID_BREP('',#22030); +#22030 = CLOSED_SHELL('',(#22031,#22065,#22090,#22099,#22200,#22231, + #22256,#22281,#22305,#22329,#22354,#22379,#22396,#22421,#22446, + #22479,#22505,#22531,#22556,#22581,#22607,#22633,#22650,#22676, + #22702,#22718,#22727)); +#22031 = ADVANCED_FACE('',(#22032),#22060,.T.); +#22032 = FACE_BOUND('',#22033,.T.); +#22033 = EDGE_LOOP('',(#22034,#22043,#22052,#22059)); +#22034 = ORIENTED_EDGE('',*,*,#22035,.T.); +#22035 = EDGE_CURVE('',#22036,#22036,#22038,.T.); +#22036 = VERTEX_POINT('',#22037); +#22037 = CARTESIAN_POINT('',(5.23,6.162975822039E-33,-4.)); +#22038 = CIRCLE('',#22039,0.15); +#22039 = AXIS2_PLACEMENT_3D('',#22040,#22041,#22042); +#22040 = CARTESIAN_POINT('',(5.08,1.54074395551E-32,-4.)); +#22041 = DIRECTION('',(-7.92969555769E-31,-4.08046586736E-33,1.)); +#22042 = DIRECTION('',(1.,-6.162975822039E-32,7.92969555769E-31)); +#22043 = ORIENTED_EDGE('',*,*,#22044,.F.); +#22044 = EDGE_CURVE('',#22045,#22036,#22047,.T.); +#22045 = VERTEX_POINT('',#22046); +#22046 = CARTESIAN_POINT('',(5.33,-4.08046586736E-34,-3.9)); +#22047 = CIRCLE('',#22048,0.1); +#22048 = AXIS2_PLACEMENT_3D('',#22049,#22050,#22051); +#22049 = CARTESIAN_POINT('',(5.23,5.754929235303E-33,-3.9)); +#22050 = DIRECTION('',(6.162975822039E-32,1.,4.08046586736E-33)); +#22051 = DIRECTION('',(1.,-6.162975822039E-32,7.92969555769E-31)); +#22052 = ORIENTED_EDGE('',*,*,#22053,.F.); +#22053 = EDGE_CURVE('',#22045,#22045,#22054,.T.); +#22054 = CIRCLE('',#22055,0.25); +#22055 = AXIS2_PLACEMENT_3D('',#22056,#22057,#22058); +#22056 = CARTESIAN_POINT('',(5.08,1.499939296836E-32,-3.9)); +#22057 = DIRECTION('',(-7.92969555769E-31,-4.08046586736E-33,1.)); +#22058 = DIRECTION('',(1.,-6.162975822039E-32,7.92969555769E-31)); +#22059 = ORIENTED_EDGE('',*,*,#22044,.T.); +#22060 = TOROIDAL_SURFACE('',#22061,0.15,0.1); +#22061 = AXIS2_PLACEMENT_3D('',#22062,#22063,#22064); +#22062 = CARTESIAN_POINT('',(5.08,1.499939296836E-32,-3.9)); +#22063 = DIRECTION('',(7.92969555769E-31,4.08046586736E-33,-1.)); +#22064 = DIRECTION('',(1.,-6.162975822039E-32,7.92969555769E-31)); +#22065 = ADVANCED_FACE('',(#22066),#22085,.T.); +#22066 = FACE_BOUND('',#22067,.T.); +#22067 = EDGE_LOOP('',(#22068,#22077,#22083,#22084)); +#22068 = ORIENTED_EDGE('',*,*,#22069,.F.); +#22069 = EDGE_CURVE('',#22070,#22070,#22072,.T.); +#22070 = VERTEX_POINT('',#22071); +#22071 = CARTESIAN_POINT('',(5.33,0.,0.1)); +#22072 = CIRCLE('',#22073,0.25); +#22073 = AXIS2_PLACEMENT_3D('',#22074,#22075,#22076); +#22074 = CARTESIAN_POINT('',(5.08,0.,0.1)); +#22075 = DIRECTION('',(0.,0.,1.)); +#22076 = DIRECTION('',(1.,0.,-0.)); +#22077 = ORIENTED_EDGE('',*,*,#22078,.T.); +#22078 = EDGE_CURVE('',#22070,#22045,#22079,.T.); +#22079 = LINE('',#22080,#22081); +#22080 = CARTESIAN_POINT('',(5.33,0.,0.2)); +#22081 = VECTOR('',#22082,1.); +#22082 = DIRECTION('',(-0.,-0.,-1.)); +#22083 = ORIENTED_EDGE('',*,*,#22053,.T.); +#22084 = ORIENTED_EDGE('',*,*,#22078,.F.); +#22085 = CYLINDRICAL_SURFACE('',#22086,0.25); +#22086 = AXIS2_PLACEMENT_3D('',#22087,#22088,#22089); +#22087 = CARTESIAN_POINT('',(5.08,0.,0.2)); +#22088 = DIRECTION('',(0.,0.,1.)); +#22089 = DIRECTION('',(1.,0.,-0.)); +#22090 = ADVANCED_FACE('',(#22091),#22094,.F.); +#22091 = FACE_BOUND('',#22092,.F.); +#22092 = EDGE_LOOP('',(#22093)); +#22093 = ORIENTED_EDGE('',*,*,#22035,.T.); +#22094 = PLANE('',#22095); +#22095 = AXIS2_PLACEMENT_3D('',#22096,#22097,#22098); +#22096 = CARTESIAN_POINT('',(5.08,2.18439881135E-17,-4.)); +#22097 = DIRECTION('',(-7.92969555769E-31,-4.08046586736E-33,1.)); +#22098 = DIRECTION('',(1.,0.,7.92969555769E-31)); +#22099 = ADVANCED_FACE('',(#22100,#22170,#22181,#22184),#22195,.T.); +#22100 = FACE_BOUND('',#22101,.T.); +#22101 = EDGE_LOOP('',(#22102,#22112,#22121,#22129,#22138,#22146,#22155, + #22163)); +#22102 = ORIENTED_EDGE('',*,*,#22103,.T.); +#22103 = EDGE_CURVE('',#22104,#22106,#22108,.T.); +#22104 = VERTEX_POINT('',#22105); +#22105 = CARTESIAN_POINT('',(8.29,6.075,0.1)); +#22106 = VERTEX_POINT('',#22107); +#22107 = CARTESIAN_POINT('',(8.29,-1.575,0.1)); +#22108 = LINE('',#22109,#22110); +#22109 = CARTESIAN_POINT('',(8.29,6.5,0.1)); +#22110 = VECTOR('',#22111,1.); +#22111 = DIRECTION('',(0.,-1.,0.)); +#22112 = ORIENTED_EDGE('',*,*,#22113,.F.); +#22113 = EDGE_CURVE('',#22114,#22106,#22116,.T.); +#22114 = VERTEX_POINT('',#22115); +#22115 = CARTESIAN_POINT('',(7.865,-2.,0.1)); +#22116 = CIRCLE('',#22117,0.425); +#22117 = AXIS2_PLACEMENT_3D('',#22118,#22119,#22120); +#22118 = CARTESIAN_POINT('',(7.865,-1.575,0.1)); +#22119 = DIRECTION('',(-0.,0.,1.)); +#22120 = DIRECTION('',(0.,-1.,0.)); +#22121 = ORIENTED_EDGE('',*,*,#22122,.T.); +#22122 = EDGE_CURVE('',#22114,#22123,#22125,.T.); +#22123 = VERTEX_POINT('',#22124); +#22124 = CARTESIAN_POINT('',(-2.885,-2.,0.1)); +#22125 = LINE('',#22126,#22127); +#22126 = CARTESIAN_POINT('',(8.29,-2.,0.1)); +#22127 = VECTOR('',#22128,1.); +#22128 = DIRECTION('',(-1.,0.,0.)); +#22129 = ORIENTED_EDGE('',*,*,#22130,.T.); +#22130 = EDGE_CURVE('',#22123,#22131,#22133,.T.); +#22131 = VERTEX_POINT('',#22132); +#22132 = CARTESIAN_POINT('',(-3.31,-1.575,0.1)); +#22133 = CIRCLE('',#22134,0.425); +#22134 = AXIS2_PLACEMENT_3D('',#22135,#22136,#22137); +#22135 = CARTESIAN_POINT('',(-2.885,-1.575,0.1)); +#22136 = DIRECTION('',(-0.,-0.,-1.)); +#22137 = DIRECTION('',(0.,-1.,0.)); +#22138 = ORIENTED_EDGE('',*,*,#22139,.T.); +#22139 = EDGE_CURVE('',#22131,#22140,#22142,.T.); +#22140 = VERTEX_POINT('',#22141); +#22141 = CARTESIAN_POINT('',(-3.31,6.075,0.1)); +#22142 = LINE('',#22143,#22144); +#22143 = CARTESIAN_POINT('',(-3.31,-2.,0.1)); +#22144 = VECTOR('',#22145,1.); +#22145 = DIRECTION('',(0.,1.,0.)); +#22146 = ORIENTED_EDGE('',*,*,#22147,.T.); +#22147 = EDGE_CURVE('',#22140,#22148,#22150,.T.); +#22148 = VERTEX_POINT('',#22149); +#22149 = CARTESIAN_POINT('',(-2.885,6.5,0.1)); +#22150 = CIRCLE('',#22151,0.425); +#22151 = AXIS2_PLACEMENT_3D('',#22152,#22153,#22154); +#22152 = CARTESIAN_POINT('',(-2.885,6.075,0.1)); +#22153 = DIRECTION('',(-0.,-0.,-1.)); +#22154 = DIRECTION('',(0.,-1.,0.)); +#22155 = ORIENTED_EDGE('',*,*,#22156,.T.); +#22156 = EDGE_CURVE('',#22148,#22157,#22159,.T.); +#22157 = VERTEX_POINT('',#22158); +#22158 = CARTESIAN_POINT('',(7.865,6.5,0.1)); +#22159 = LINE('',#22160,#22161); +#22160 = CARTESIAN_POINT('',(-3.31,6.5,0.1)); +#22161 = VECTOR('',#22162,1.); +#22162 = DIRECTION('',(1.,0.,0.)); +#22163 = ORIENTED_EDGE('',*,*,#22164,.F.); +#22164 = EDGE_CURVE('',#22104,#22157,#22165,.T.); +#22165 = CIRCLE('',#22166,0.425); +#22166 = AXIS2_PLACEMENT_3D('',#22167,#22168,#22169); +#22167 = CARTESIAN_POINT('',(7.865,6.075,0.1)); +#22168 = DIRECTION('',(-0.,0.,1.)); +#22169 = DIRECTION('',(0.,-1.,0.)); +#22170 = FACE_BOUND('',#22171,.T.); +#22171 = EDGE_LOOP('',(#22172)); +#22172 = ORIENTED_EDGE('',*,*,#22173,.T.); +#22173 = EDGE_CURVE('',#22174,#22174,#22176,.T.); +#22174 = VERTEX_POINT('',#22175); +#22175 = CARTESIAN_POINT('',(2.79,0.,0.1)); +#22176 = CIRCLE('',#22177,0.25); +#22177 = AXIS2_PLACEMENT_3D('',#22178,#22179,#22180); +#22178 = CARTESIAN_POINT('',(2.54,0.,0.1)); +#22179 = DIRECTION('',(0.,0.,1.)); +#22180 = DIRECTION('',(1.,0.,-0.)); +#22181 = FACE_BOUND('',#22182,.T.); +#22182 = EDGE_LOOP('',(#22183)); +#22183 = ORIENTED_EDGE('',*,*,#22069,.T.); +#22184 = FACE_BOUND('',#22185,.T.); +#22185 = EDGE_LOOP('',(#22186)); +#22186 = ORIENTED_EDGE('',*,*,#22187,.T.); +#22187 = EDGE_CURVE('',#22188,#22188,#22190,.T.); +#22188 = VERTEX_POINT('',#22189); +#22189 = CARTESIAN_POINT('',(0.25,0.,0.1)); +#22190 = CIRCLE('',#22191,0.25); +#22191 = AXIS2_PLACEMENT_3D('',#22192,#22193,#22194); +#22192 = CARTESIAN_POINT('',(0.,0.,0.1)); +#22193 = DIRECTION('',(0.,0.,1.)); +#22194 = DIRECTION('',(1.,0.,-0.)); +#22195 = PLANE('',#22196); +#22196 = AXIS2_PLACEMENT_3D('',#22197,#22198,#22199); +#22197 = CARTESIAN_POINT('',(2.49,2.25,0.1)); +#22198 = DIRECTION('',(-0.,-0.,-1.)); +#22199 = DIRECTION('',(-1.,0.,0.)); +#22200 = ADVANCED_FACE('',(#22201),#22226,.T.); +#22201 = FACE_BOUND('',#22202,.T.); +#22202 = EDGE_LOOP('',(#22203,#22211,#22219,#22225)); +#22203 = ORIENTED_EDGE('',*,*,#22204,.T.); +#22204 = EDGE_CURVE('',#22104,#22205,#22207,.T.); +#22205 = VERTEX_POINT('',#22206); +#22206 = CARTESIAN_POINT('',(8.29,6.075,10.2875)); +#22207 = LINE('',#22208,#22209); +#22208 = CARTESIAN_POINT('',(8.29,6.075,0.1)); +#22209 = VECTOR('',#22210,1.); +#22210 = DIRECTION('',(0.,0.,1.)); +#22211 = ORIENTED_EDGE('',*,*,#22212,.T.); +#22212 = EDGE_CURVE('',#22205,#22213,#22215,.T.); +#22213 = VERTEX_POINT('',#22214); +#22214 = CARTESIAN_POINT('',(8.29,-1.575,10.2875)); +#22215 = LINE('',#22216,#22217); +#22216 = CARTESIAN_POINT('',(8.29,6.075,10.2875)); +#22217 = VECTOR('',#22218,1.); +#22218 = DIRECTION('',(0.,-1.,0.)); +#22219 = ORIENTED_EDGE('',*,*,#22220,.F.); +#22220 = EDGE_CURVE('',#22106,#22213,#22221,.T.); +#22221 = LINE('',#22222,#22223); +#22222 = CARTESIAN_POINT('',(8.29,-1.575,0.1)); +#22223 = VECTOR('',#22224,1.); +#22224 = DIRECTION('',(0.,0.,1.)); +#22225 = ORIENTED_EDGE('',*,*,#22103,.F.); +#22226 = PLANE('',#22227); +#22227 = AXIS2_PLACEMENT_3D('',#22228,#22229,#22230); +#22228 = CARTESIAN_POINT('',(8.29,6.5,0.1)); +#22229 = DIRECTION('',(1.,0.,0.)); +#22230 = DIRECTION('',(0.,-1.,0.)); +#22231 = ADVANCED_FACE('',(#22232),#22251,.T.); +#22232 = FACE_BOUND('',#22233,.T.); +#22233 = EDGE_LOOP('',(#22234,#22235,#22236,#22244)); +#22234 = ORIENTED_EDGE('',*,*,#22204,.F.); +#22235 = ORIENTED_EDGE('',*,*,#22164,.T.); +#22236 = ORIENTED_EDGE('',*,*,#22237,.T.); +#22237 = EDGE_CURVE('',#22157,#22238,#22240,.T.); +#22238 = VERTEX_POINT('',#22239); +#22239 = CARTESIAN_POINT('',(7.865,6.5,10.2875)); +#22240 = LINE('',#22241,#22242); +#22241 = CARTESIAN_POINT('',(7.865,6.5,0.1)); +#22242 = VECTOR('',#22243,1.); +#22243 = DIRECTION('',(0.,0.,1.)); +#22244 = ORIENTED_EDGE('',*,*,#22245,.T.); +#22245 = EDGE_CURVE('',#22238,#22205,#22246,.T.); +#22246 = CIRCLE('',#22247,0.425); +#22247 = AXIS2_PLACEMENT_3D('',#22248,#22249,#22250); +#22248 = CARTESIAN_POINT('',(7.865,6.075,10.2875)); +#22249 = DIRECTION('',(0.,0.,-1.)); +#22250 = DIRECTION('',(0.,1.,0.)); +#22251 = CYLINDRICAL_SURFACE('',#22252,0.425); +#22252 = AXIS2_PLACEMENT_3D('',#22253,#22254,#22255); +#22253 = CARTESIAN_POINT('',(7.865,6.075,0.1)); +#22254 = DIRECTION('',(0.,0.,1.)); +#22255 = DIRECTION('',(1.,0.,-0.)); +#22256 = ADVANCED_FACE('',(#22257),#22276,.T.); +#22257 = FACE_BOUND('',#22258,.T.); +#22258 = EDGE_LOOP('',(#22259,#22267,#22268,#22269)); +#22259 = ORIENTED_EDGE('',*,*,#22260,.F.); +#22260 = EDGE_CURVE('',#22114,#22261,#22263,.T.); +#22261 = VERTEX_POINT('',#22262); +#22262 = CARTESIAN_POINT('',(7.865,-2.,10.2875)); +#22263 = LINE('',#22264,#22265); +#22264 = CARTESIAN_POINT('',(7.865,-2.,0.1)); +#22265 = VECTOR('',#22266,1.); +#22266 = DIRECTION('',(0.,0.,1.)); +#22267 = ORIENTED_EDGE('',*,*,#22113,.T.); +#22268 = ORIENTED_EDGE('',*,*,#22220,.T.); +#22269 = ORIENTED_EDGE('',*,*,#22270,.T.); +#22270 = EDGE_CURVE('',#22213,#22261,#22271,.T.); +#22271 = CIRCLE('',#22272,0.425); +#22272 = AXIS2_PLACEMENT_3D('',#22273,#22274,#22275); +#22273 = CARTESIAN_POINT('',(7.865,-1.575,10.2875)); +#22274 = DIRECTION('',(0.,0.,-1.)); +#22275 = DIRECTION('',(1.,1.044915787883E-15,0.)); +#22276 = CYLINDRICAL_SURFACE('',#22277,0.425); +#22277 = AXIS2_PLACEMENT_3D('',#22278,#22279,#22280); +#22278 = CARTESIAN_POINT('',(7.865,-1.575,0.1)); +#22279 = DIRECTION('',(0.,0.,1.)); +#22280 = DIRECTION('',(0.,-1.,0.)); +#22281 = ADVANCED_FACE('',(#22282),#22300,.T.); +#22282 = FACE_BOUND('',#22283,.T.); +#22283 = EDGE_LOOP('',(#22284,#22285,#22286,#22294)); +#22284 = ORIENTED_EDGE('',*,*,#22237,.F.); +#22285 = ORIENTED_EDGE('',*,*,#22156,.F.); +#22286 = ORIENTED_EDGE('',*,*,#22287,.T.); +#22287 = EDGE_CURVE('',#22148,#22288,#22290,.T.); +#22288 = VERTEX_POINT('',#22289); +#22289 = CARTESIAN_POINT('',(-2.885,6.5,10.2875)); +#22290 = LINE('',#22291,#22292); +#22291 = CARTESIAN_POINT('',(-2.885,6.5,0.1)); +#22292 = VECTOR('',#22293,1.); +#22293 = DIRECTION('',(0.,0.,1.)); +#22294 = ORIENTED_EDGE('',*,*,#22295,.T.); +#22295 = EDGE_CURVE('',#22288,#22238,#22296,.T.); +#22296 = LINE('',#22297,#22298); +#22297 = CARTESIAN_POINT('',(-2.885,6.5,10.2875)); +#22298 = VECTOR('',#22299,1.); +#22299 = DIRECTION('',(1.,0.,0.)); +#22300 = PLANE('',#22301); +#22301 = AXIS2_PLACEMENT_3D('',#22302,#22303,#22304); +#22302 = CARTESIAN_POINT('',(-3.31,6.5,0.1)); +#22303 = DIRECTION('',(0.,1.,0.)); +#22304 = DIRECTION('',(1.,0.,0.)); +#22305 = ADVANCED_FACE('',(#22306),#22324,.T.); +#22306 = FACE_BOUND('',#22307,.T.); +#22307 = EDGE_LOOP('',(#22308,#22309,#22317,#22323)); +#22308 = ORIENTED_EDGE('',*,*,#22260,.T.); +#22309 = ORIENTED_EDGE('',*,*,#22310,.T.); +#22310 = EDGE_CURVE('',#22261,#22311,#22313,.T.); +#22311 = VERTEX_POINT('',#22312); +#22312 = CARTESIAN_POINT('',(-2.885,-2.,10.2875)); +#22313 = LINE('',#22314,#22315); +#22314 = CARTESIAN_POINT('',(7.865,-2.,10.2875)); +#22315 = VECTOR('',#22316,1.); +#22316 = DIRECTION('',(-1.,0.,0.)); +#22317 = ORIENTED_EDGE('',*,*,#22318,.F.); +#22318 = EDGE_CURVE('',#22123,#22311,#22319,.T.); +#22319 = LINE('',#22320,#22321); +#22320 = CARTESIAN_POINT('',(-2.885,-2.,0.1)); +#22321 = VECTOR('',#22322,1.); +#22322 = DIRECTION('',(0.,0.,1.)); +#22323 = ORIENTED_EDGE('',*,*,#22122,.F.); +#22324 = PLANE('',#22325); +#22325 = AXIS2_PLACEMENT_3D('',#22326,#22327,#22328); +#22326 = CARTESIAN_POINT('',(8.29,-2.,0.1)); +#22327 = DIRECTION('',(0.,-1.,0.)); +#22328 = DIRECTION('',(-1.,0.,0.)); +#22329 = ADVANCED_FACE('',(#22330),#22349,.T.); +#22330 = FACE_BOUND('',#22331,.T.); +#22331 = EDGE_LOOP('',(#22332,#22341,#22342,#22343)); +#22332 = ORIENTED_EDGE('',*,*,#22333,.T.); +#22333 = EDGE_CURVE('',#22334,#22288,#22336,.T.); +#22334 = VERTEX_POINT('',#22335); +#22335 = CARTESIAN_POINT('',(-3.31,6.075,10.2875)); +#22336 = CIRCLE('',#22337,0.425); +#22337 = AXIS2_PLACEMENT_3D('',#22338,#22339,#22340); +#22338 = CARTESIAN_POINT('',(-2.885,6.075,10.2875)); +#22339 = DIRECTION('',(0.,0.,-1.)); +#22340 = DIRECTION('',(-1.,2.089831575765E-15,0.)); +#22341 = ORIENTED_EDGE('',*,*,#22287,.F.); +#22342 = ORIENTED_EDGE('',*,*,#22147,.F.); +#22343 = ORIENTED_EDGE('',*,*,#22344,.T.); +#22344 = EDGE_CURVE('',#22140,#22334,#22345,.T.); +#22345 = LINE('',#22346,#22347); +#22346 = CARTESIAN_POINT('',(-3.31,6.075,0.1)); +#22347 = VECTOR('',#22348,1.); +#22348 = DIRECTION('',(0.,0.,1.)); +#22349 = CYLINDRICAL_SURFACE('',#22350,0.425); +#22350 = AXIS2_PLACEMENT_3D('',#22351,#22352,#22353); +#22351 = CARTESIAN_POINT('',(-2.885,6.075,0.1)); +#22352 = DIRECTION('',(0.,0.,1.)); +#22353 = DIRECTION('',(-1.,0.,0.)); +#22354 = ADVANCED_FACE('',(#22355),#22374,.T.); +#22355 = FACE_BOUND('',#22356,.T.); +#22356 = EDGE_LOOP('',(#22357,#22366,#22372,#22373)); +#22357 = ORIENTED_EDGE('',*,*,#22358,.T.); +#22358 = EDGE_CURVE('',#22311,#22359,#22361,.T.); +#22359 = VERTEX_POINT('',#22360); +#22360 = CARTESIAN_POINT('',(-3.31,-1.575,10.2875)); +#22361 = CIRCLE('',#22362,0.425); +#22362 = AXIS2_PLACEMENT_3D('',#22363,#22364,#22365); +#22363 = CARTESIAN_POINT('',(-2.885,-1.575,10.2875)); +#22364 = DIRECTION('',(-0.,0.,-1.)); +#22365 = DIRECTION('',(-1.044915787883E-15,-1.,0.)); +#22366 = ORIENTED_EDGE('',*,*,#22367,.F.); +#22367 = EDGE_CURVE('',#22131,#22359,#22368,.T.); +#22368 = LINE('',#22369,#22370); +#22369 = CARTESIAN_POINT('',(-3.31,-1.575,0.1)); +#22370 = VECTOR('',#22371,1.); +#22371 = DIRECTION('',(0.,0.,1.)); +#22372 = ORIENTED_EDGE('',*,*,#22130,.F.); +#22373 = ORIENTED_EDGE('',*,*,#22318,.T.); +#22374 = CYLINDRICAL_SURFACE('',#22375,0.425); +#22375 = AXIS2_PLACEMENT_3D('',#22376,#22377,#22378); +#22376 = CARTESIAN_POINT('',(-2.885,-1.575,0.1)); +#22377 = DIRECTION('',(0.,0.,1.)); +#22378 = DIRECTION('',(0.,-1.,0.)); +#22379 = ADVANCED_FACE('',(#22380),#22391,.T.); +#22380 = FACE_BOUND('',#22381,.T.); +#22381 = EDGE_LOOP('',(#22382,#22383,#22384,#22385)); +#22382 = ORIENTED_EDGE('',*,*,#22344,.F.); +#22383 = ORIENTED_EDGE('',*,*,#22139,.F.); +#22384 = ORIENTED_EDGE('',*,*,#22367,.T.); +#22385 = ORIENTED_EDGE('',*,*,#22386,.T.); +#22386 = EDGE_CURVE('',#22359,#22334,#22387,.T.); +#22387 = LINE('',#22388,#22389); +#22388 = CARTESIAN_POINT('',(-3.31,-1.575,10.2875)); +#22389 = VECTOR('',#22390,1.); +#22390 = DIRECTION('',(0.,1.,0.)); +#22391 = PLANE('',#22392); +#22392 = AXIS2_PLACEMENT_3D('',#22393,#22394,#22395); +#22393 = CARTESIAN_POINT('',(-3.31,-2.,0.1)); +#22394 = DIRECTION('',(-1.,0.,0.)); +#22395 = DIRECTION('',(0.,1.,0.)); +#22396 = ADVANCED_FACE('',(#22397),#22416,.T.); +#22397 = FACE_BOUND('',#22398,.T.); +#22398 = EDGE_LOOP('',(#22399,#22400,#22408,#22415)); +#22399 = ORIENTED_EDGE('',*,*,#22173,.F.); +#22400 = ORIENTED_EDGE('',*,*,#22401,.T.); +#22401 = EDGE_CURVE('',#22174,#22402,#22404,.T.); +#22402 = VERTEX_POINT('',#22403); +#22403 = CARTESIAN_POINT('',(2.79,-4.08046586736E-34,-3.9)); +#22404 = LINE('',#22405,#22406); +#22405 = CARTESIAN_POINT('',(2.79,0.,0.2)); +#22406 = VECTOR('',#22407,1.); +#22407 = DIRECTION('',(-0.,-0.,-1.)); +#22408 = ORIENTED_EDGE('',*,*,#22409,.T.); +#22409 = EDGE_CURVE('',#22402,#22402,#22410,.T.); +#22410 = CIRCLE('',#22411,0.25); +#22411 = AXIS2_PLACEMENT_3D('',#22412,#22413,#22414); +#22412 = CARTESIAN_POINT('',(2.54,1.499939296836E-32,-3.9)); +#22413 = DIRECTION('',(-3.985391031585E-31,-4.08046586736E-33,1.)); +#22414 = DIRECTION('',(1.,-6.162975822039E-32,3.985391031585E-31)); +#22415 = ORIENTED_EDGE('',*,*,#22401,.F.); +#22416 = CYLINDRICAL_SURFACE('',#22417,0.25); +#22417 = AXIS2_PLACEMENT_3D('',#22418,#22419,#22420); +#22418 = CARTESIAN_POINT('',(2.54,0.,0.2)); +#22419 = DIRECTION('',(0.,0.,1.)); +#22420 = DIRECTION('',(1.,0.,-0.)); +#22421 = ADVANCED_FACE('',(#22422),#22441,.T.); +#22422 = FACE_BOUND('',#22423,.T.); +#22423 = EDGE_LOOP('',(#22424,#22425,#22433,#22440)); +#22424 = ORIENTED_EDGE('',*,*,#22187,.F.); +#22425 = ORIENTED_EDGE('',*,*,#22426,.T.); +#22426 = EDGE_CURVE('',#22188,#22427,#22429,.T.); +#22427 = VERTEX_POINT('',#22428); +#22428 = CARTESIAN_POINT('',(0.25,-4.08046586736E-34,-3.9)); +#22429 = LINE('',#22430,#22431); +#22430 = CARTESIAN_POINT('',(0.25,0.,0.2)); +#22431 = VECTOR('',#22432,1.); +#22432 = DIRECTION('',(-0.,-0.,-1.)); +#22433 = ORIENTED_EDGE('',*,*,#22434,.T.); +#22434 = EDGE_CURVE('',#22427,#22427,#22435,.T.); +#22435 = CIRCLE('',#22436,0.25); +#22436 = AXIS2_PLACEMENT_3D('',#22437,#22438,#22439); +#22437 = CARTESIAN_POINT('',(-3.615612482263E-32,1.499939296836E-32,-3.9 + )); +#22438 = DIRECTION('',(8.217301096052E-33,-4.08046586736E-33,1.)); +#22439 = DIRECTION('',(1.,-6.162975822039E-32,-8.217301096052E-33)); +#22440 = ORIENTED_EDGE('',*,*,#22426,.F.); +#22441 = CYLINDRICAL_SURFACE('',#22442,0.25); +#22442 = AXIS2_PLACEMENT_3D('',#22443,#22444,#22445); +#22443 = CARTESIAN_POINT('',(0.,0.,0.2)); +#22444 = DIRECTION('',(0.,0.,1.)); +#22445 = DIRECTION('',(1.,0.,-0.)); +#22446 = ADVANCED_FACE('',(#22447),#22474,.T.); +#22447 = FACE_BOUND('',#22448,.T.); +#22448 = EDGE_LOOP('',(#22449,#22458,#22466,#22473)); +#22449 = ORIENTED_EDGE('',*,*,#22450,.T.); +#22450 = EDGE_CURVE('',#22205,#22451,#22453,.T.); +#22451 = VERTEX_POINT('',#22452); +#22452 = CARTESIAN_POINT('',(8.0775,6.075,10.5)); +#22453 = CIRCLE('',#22454,0.2125); +#22454 = AXIS2_PLACEMENT_3D('',#22455,#22456,#22457); +#22455 = CARTESIAN_POINT('',(8.0775,6.075,10.2875)); +#22456 = DIRECTION('',(6.123233995737E-17,-1.,0.)); +#22457 = DIRECTION('',(1.,6.123233995737E-17,0.)); +#22458 = ORIENTED_EDGE('',*,*,#22459,.T.); +#22459 = EDGE_CURVE('',#22451,#22460,#22462,.T.); +#22460 = VERTEX_POINT('',#22461); +#22461 = CARTESIAN_POINT('',(8.0775,-1.575,10.5)); +#22462 = LINE('',#22463,#22464); +#22463 = CARTESIAN_POINT('',(8.0775,6.075,10.5)); +#22464 = VECTOR('',#22465,1.); +#22465 = DIRECTION('',(0.,-1.,0.)); +#22466 = ORIENTED_EDGE('',*,*,#22467,.F.); +#22467 = EDGE_CURVE('',#22213,#22460,#22468,.T.); +#22468 = CIRCLE('',#22469,0.2125); +#22469 = AXIS2_PLACEMENT_3D('',#22470,#22471,#22472); +#22470 = CARTESIAN_POINT('',(8.0775,-1.575,10.2875)); +#22471 = DIRECTION('',(0.,-1.,0.)); +#22472 = DIRECTION('',(1.,0.,0.)); +#22473 = ORIENTED_EDGE('',*,*,#22212,.F.); +#22474 = CYLINDRICAL_SURFACE('',#22475,0.2125); +#22475 = AXIS2_PLACEMENT_3D('',#22476,#22477,#22478); +#22476 = CARTESIAN_POINT('',(8.0775,6.075,10.2875)); +#22477 = DIRECTION('',(0.,-1.,0.)); +#22478 = DIRECTION('',(1.,0.,0.)); +#22479 = ADVANCED_FACE('',(#22480),#22500,.T.); +#22480 = FACE_BOUND('',#22481,.T.); +#22481 = EDGE_LOOP('',(#22482,#22491,#22492,#22493)); +#22482 = ORIENTED_EDGE('',*,*,#22483,.T.); +#22483 = EDGE_CURVE('',#22484,#22451,#22486,.T.); +#22484 = VERTEX_POINT('',#22485); +#22485 = CARTESIAN_POINT('',(7.865,6.2875,10.5)); +#22486 = CIRCLE('',#22487,0.2125); +#22487 = AXIS2_PLACEMENT_3D('',#22488,#22489,#22490); +#22488 = CARTESIAN_POINT('',(7.865,6.075,10.5)); +#22489 = DIRECTION('',(0.,0.,-1.)); +#22490 = DIRECTION('',(0.,1.,0.)); +#22491 = ORIENTED_EDGE('',*,*,#22450,.F.); +#22492 = ORIENTED_EDGE('',*,*,#22245,.F.); +#22493 = ORIENTED_EDGE('',*,*,#22494,.T.); +#22494 = EDGE_CURVE('',#22238,#22484,#22495,.T.); +#22495 = CIRCLE('',#22496,0.2125); +#22496 = AXIS2_PLACEMENT_3D('',#22497,#22498,#22499); +#22497 = CARTESIAN_POINT('',(7.865,6.2875,10.2875)); +#22498 = DIRECTION('',(1.,0.,0.)); +#22499 = DIRECTION('',(-0.,1.,0.)); +#22500 = TOROIDAL_SURFACE('',#22501,0.2125,0.2125); +#22501 = AXIS2_PLACEMENT_3D('',#22502,#22503,#22504); +#22502 = CARTESIAN_POINT('',(7.865,6.075,10.2875)); +#22503 = DIRECTION('',(0.,0.,1.)); +#22504 = DIRECTION('',(0.,1.,0.)); +#22505 = ADVANCED_FACE('',(#22506),#22526,.T.); +#22506 = FACE_BOUND('',#22507,.T.); +#22507 = EDGE_LOOP('',(#22508,#22517,#22524,#22525)); +#22508 = ORIENTED_EDGE('',*,*,#22509,.T.); +#22509 = EDGE_CURVE('',#22460,#22510,#22512,.T.); +#22510 = VERTEX_POINT('',#22511); +#22511 = CARTESIAN_POINT('',(7.865,-1.7875,10.5)); +#22512 = CIRCLE('',#22513,0.2125); +#22513 = AXIS2_PLACEMENT_3D('',#22514,#22515,#22516); +#22514 = CARTESIAN_POINT('',(7.865,-1.575,10.5)); +#22515 = DIRECTION('',(0.,0.,-1.)); +#22516 = DIRECTION('',(1.,1.044915787883E-15,0.)); +#22517 = ORIENTED_EDGE('',*,*,#22518,.F.); +#22518 = EDGE_CURVE('',#22261,#22510,#22519,.T.); +#22519 = CIRCLE('',#22520,0.2125); +#22520 = AXIS2_PLACEMENT_3D('',#22521,#22522,#22523); +#22521 = CARTESIAN_POINT('',(7.865,-1.7875,10.2875)); +#22522 = DIRECTION('',(-1.,4.074896785288E-18,0.)); +#22523 = DIRECTION('',(-4.074896785288E-18,-1.,-0.)); +#22524 = ORIENTED_EDGE('',*,*,#22270,.F.); +#22525 = ORIENTED_EDGE('',*,*,#22467,.T.); +#22526 = TOROIDAL_SURFACE('',#22527,0.2125,0.2125); +#22527 = AXIS2_PLACEMENT_3D('',#22528,#22529,#22530); +#22528 = CARTESIAN_POINT('',(7.865,-1.575,10.2875)); +#22529 = DIRECTION('',(0.,0.,1.)); +#22530 = DIRECTION('',(1.,1.044915787883E-15,-0.)); +#22531 = ADVANCED_FACE('',(#22532),#22551,.T.); +#22532 = FACE_BOUND('',#22533,.T.); +#22533 = EDGE_LOOP('',(#22534,#22543,#22549,#22550)); +#22534 = ORIENTED_EDGE('',*,*,#22535,.T.); +#22535 = EDGE_CURVE('',#22288,#22536,#22538,.T.); +#22536 = VERTEX_POINT('',#22537); +#22537 = CARTESIAN_POINT('',(-2.885,6.2875,10.5)); +#22538 = CIRCLE('',#22539,0.2125); +#22539 = AXIS2_PLACEMENT_3D('',#22540,#22541,#22542); +#22540 = CARTESIAN_POINT('',(-2.885,6.2875,10.2875)); +#22541 = DIRECTION('',(1.,0.,0.)); +#22542 = DIRECTION('',(-0.,1.,0.)); +#22543 = ORIENTED_EDGE('',*,*,#22544,.T.); +#22544 = EDGE_CURVE('',#22536,#22484,#22545,.T.); +#22545 = LINE('',#22546,#22547); +#22546 = CARTESIAN_POINT('',(-2.885,6.2875,10.5)); +#22547 = VECTOR('',#22548,1.); +#22548 = DIRECTION('',(1.,0.,0.)); +#22549 = ORIENTED_EDGE('',*,*,#22494,.F.); +#22550 = ORIENTED_EDGE('',*,*,#22295,.F.); +#22551 = CYLINDRICAL_SURFACE('',#22552,0.2125); +#22552 = AXIS2_PLACEMENT_3D('',#22553,#22554,#22555); +#22553 = CARTESIAN_POINT('',(-2.885,6.2875,10.2875)); +#22554 = DIRECTION('',(1.,0.,0.)); +#22555 = DIRECTION('',(-0.,1.,0.)); +#22556 = ADVANCED_FACE('',(#22557),#22576,.T.); +#22557 = FACE_BOUND('',#22558,.T.); +#22558 = EDGE_LOOP('',(#22559,#22560,#22568,#22575)); +#22559 = ORIENTED_EDGE('',*,*,#22518,.T.); +#22560 = ORIENTED_EDGE('',*,*,#22561,.T.); +#22561 = EDGE_CURVE('',#22510,#22562,#22564,.T.); +#22562 = VERTEX_POINT('',#22563); +#22563 = CARTESIAN_POINT('',(-2.885,-1.7875,10.5)); +#22564 = LINE('',#22565,#22566); +#22565 = CARTESIAN_POINT('',(7.865,-1.7875,10.5)); +#22566 = VECTOR('',#22567,1.); +#22567 = DIRECTION('',(-1.,0.,0.)); +#22568 = ORIENTED_EDGE('',*,*,#22569,.F.); +#22569 = EDGE_CURVE('',#22311,#22562,#22570,.T.); +#22570 = CIRCLE('',#22571,0.2125); +#22571 = AXIS2_PLACEMENT_3D('',#22572,#22573,#22574); +#22572 = CARTESIAN_POINT('',(-2.885,-1.7875,10.2875)); +#22573 = DIRECTION('',(-1.,0.,0.)); +#22574 = DIRECTION('',(0.,-1.,0.)); +#22575 = ORIENTED_EDGE('',*,*,#22310,.F.); +#22576 = CYLINDRICAL_SURFACE('',#22577,0.2125); +#22577 = AXIS2_PLACEMENT_3D('',#22578,#22579,#22580); +#22578 = CARTESIAN_POINT('',(7.865,-1.7875,10.2875)); +#22579 = DIRECTION('',(-1.,0.,0.)); +#22580 = DIRECTION('',(0.,-1.,0.)); +#22581 = ADVANCED_FACE('',(#22582),#22602,.T.); +#22582 = FACE_BOUND('',#22583,.T.); +#22583 = EDGE_LOOP('',(#22584,#22593,#22594,#22595)); +#22584 = ORIENTED_EDGE('',*,*,#22585,.T.); +#22585 = EDGE_CURVE('',#22586,#22536,#22588,.T.); +#22586 = VERTEX_POINT('',#22587); +#22587 = CARTESIAN_POINT('',(-3.0975,6.075,10.5)); +#22588 = CIRCLE('',#22589,0.2125); +#22589 = AXIS2_PLACEMENT_3D('',#22590,#22591,#22592); +#22590 = CARTESIAN_POINT('',(-2.885,6.075,10.5)); +#22591 = DIRECTION('',(0.,0.,-1.)); +#22592 = DIRECTION('',(-1.,2.089831575765E-15,0.)); +#22593 = ORIENTED_EDGE('',*,*,#22535,.F.); +#22594 = ORIENTED_EDGE('',*,*,#22333,.F.); +#22595 = ORIENTED_EDGE('',*,*,#22596,.T.); +#22596 = EDGE_CURVE('',#22334,#22586,#22597,.T.); +#22597 = CIRCLE('',#22598,0.2125); +#22598 = AXIS2_PLACEMENT_3D('',#22599,#22600,#22601); +#22599 = CARTESIAN_POINT('',(-3.0975,6.075,10.2875)); +#22600 = DIRECTION('',(0.,1.,-0.)); +#22601 = DIRECTION('',(-1.,0.,0.)); +#22602 = TOROIDAL_SURFACE('',#22603,0.2125,0.2125); +#22603 = AXIS2_PLACEMENT_3D('',#22604,#22605,#22606); +#22604 = CARTESIAN_POINT('',(-2.885,6.075,10.2875)); +#22605 = DIRECTION('',(0.,0.,1.)); +#22606 = DIRECTION('',(-1.,2.089831575765E-15,0.)); +#22607 = ADVANCED_FACE('',(#22608),#22628,.T.); +#22608 = FACE_BOUND('',#22609,.T.); +#22609 = EDGE_LOOP('',(#22610,#22619,#22626,#22627)); +#22610 = ORIENTED_EDGE('',*,*,#22611,.T.); +#22611 = EDGE_CURVE('',#22562,#22612,#22614,.T.); +#22612 = VERTEX_POINT('',#22613); +#22613 = CARTESIAN_POINT('',(-3.0975,-1.575,10.5)); +#22614 = CIRCLE('',#22615,0.2125); +#22615 = AXIS2_PLACEMENT_3D('',#22616,#22617,#22618); +#22616 = CARTESIAN_POINT('',(-2.885,-1.575,10.5)); +#22617 = DIRECTION('',(-0.,0.,-1.)); +#22618 = DIRECTION('',(-1.044915787883E-15,-1.,0.)); +#22619 = ORIENTED_EDGE('',*,*,#22620,.F.); +#22620 = EDGE_CURVE('',#22359,#22612,#22621,.T.); +#22621 = CIRCLE('',#22622,0.2125); +#22622 = AXIS2_PLACEMENT_3D('',#22623,#22624,#22625); +#22623 = CARTESIAN_POINT('',(-3.0975,-1.575,10.2875)); +#22624 = DIRECTION('',(-1.265395767E-16,1.,0.)); +#22625 = DIRECTION('',(-1.,-1.265395767E-16,0.)); +#22626 = ORIENTED_EDGE('',*,*,#22358,.F.); +#22627 = ORIENTED_EDGE('',*,*,#22569,.T.); +#22628 = TOROIDAL_SURFACE('',#22629,0.2125,0.2125); +#22629 = AXIS2_PLACEMENT_3D('',#22630,#22631,#22632); +#22630 = CARTESIAN_POINT('',(-2.885,-1.575,10.2875)); +#22631 = DIRECTION('',(0.,0.,1.)); +#22632 = DIRECTION('',(-1.044915787883E-15,-1.,0.)); +#22633 = ADVANCED_FACE('',(#22634),#22645,.T.); +#22634 = FACE_BOUND('',#22635,.T.); +#22635 = EDGE_LOOP('',(#22636,#22637,#22643,#22644)); +#22636 = ORIENTED_EDGE('',*,*,#22620,.T.); +#22637 = ORIENTED_EDGE('',*,*,#22638,.T.); +#22638 = EDGE_CURVE('',#22612,#22586,#22639,.T.); +#22639 = LINE('',#22640,#22641); +#22640 = CARTESIAN_POINT('',(-3.0975,-1.575,10.5)); +#22641 = VECTOR('',#22642,1.); +#22642 = DIRECTION('',(0.,1.,0.)); +#22643 = ORIENTED_EDGE('',*,*,#22596,.F.); +#22644 = ORIENTED_EDGE('',*,*,#22386,.F.); +#22645 = CYLINDRICAL_SURFACE('',#22646,0.2125); +#22646 = AXIS2_PLACEMENT_3D('',#22647,#22648,#22649); +#22647 = CARTESIAN_POINT('',(-3.0975,-1.575,10.2875)); +#22648 = DIRECTION('',(0.,1.,0.)); +#22649 = DIRECTION('',(-1.,0.,0.)); +#22650 = ADVANCED_FACE('',(#22651),#22671,.T.); +#22651 = FACE_BOUND('',#22652,.T.); +#22652 = EDGE_LOOP('',(#22653,#22662,#22669,#22670)); +#22653 = ORIENTED_EDGE('',*,*,#22654,.T.); +#22654 = EDGE_CURVE('',#22655,#22655,#22657,.T.); +#22655 = VERTEX_POINT('',#22656); +#22656 = CARTESIAN_POINT('',(2.69,6.162975822039E-33,-4.)); +#22657 = CIRCLE('',#22658,0.15); +#22658 = AXIS2_PLACEMENT_3D('',#22659,#22660,#22661); +#22659 = CARTESIAN_POINT('',(2.54,1.54074395551E-32,-4.)); +#22660 = DIRECTION('',(-3.985391031585E-31,-4.08046586736E-33,1.)); +#22661 = DIRECTION('',(1.,-6.162975822039E-32,3.985391031585E-31)); +#22662 = ORIENTED_EDGE('',*,*,#22663,.F.); +#22663 = EDGE_CURVE('',#22402,#22655,#22664,.T.); +#22664 = CIRCLE('',#22665,0.1); +#22665 = AXIS2_PLACEMENT_3D('',#22666,#22667,#22668); +#22666 = CARTESIAN_POINT('',(2.69,5.754929235303E-33,-3.9)); +#22667 = DIRECTION('',(6.162975822039E-32,1.,4.08046586736E-33)); +#22668 = DIRECTION('',(1.,-6.162975822039E-32,3.985391031585E-31)); +#22669 = ORIENTED_EDGE('',*,*,#22409,.F.); +#22670 = ORIENTED_EDGE('',*,*,#22663,.T.); +#22671 = TOROIDAL_SURFACE('',#22672,0.15,0.1); +#22672 = AXIS2_PLACEMENT_3D('',#22673,#22674,#22675); +#22673 = CARTESIAN_POINT('',(2.54,1.499939296836E-32,-3.9)); +#22674 = DIRECTION('',(3.985391031585E-31,4.08046586736E-33,-1.)); +#22675 = DIRECTION('',(1.,-6.162975822039E-32,3.985391031585E-31)); +#22676 = ADVANCED_FACE('',(#22677),#22697,.T.); +#22677 = FACE_BOUND('',#22678,.T.); +#22678 = EDGE_LOOP('',(#22679,#22688,#22695,#22696)); +#22679 = ORIENTED_EDGE('',*,*,#22680,.T.); +#22680 = EDGE_CURVE('',#22681,#22681,#22683,.T.); +#22681 = VERTEX_POINT('',#22682); +#22682 = CARTESIAN_POINT('',(0.15,6.162975822039E-33,-4.)); +#22683 = CIRCLE('',#22684,0.15); +#22684 = AXIS2_PLACEMENT_3D('',#22685,#22686,#22687); +#22685 = CARTESIAN_POINT('',(-3.697785493223E-32,1.54074395551E-32,-4.) + ); +#22686 = DIRECTION('',(8.217301096052E-33,-4.08046586736E-33,1.)); +#22687 = DIRECTION('',(1.,-6.162975822039E-32,-8.217301096052E-33)); +#22688 = ORIENTED_EDGE('',*,*,#22689,.F.); +#22689 = EDGE_CURVE('',#22427,#22681,#22690,.T.); +#22690 = CIRCLE('',#22691,0.1); +#22691 = AXIS2_PLACEMENT_3D('',#22692,#22693,#22694); +#22692 = CARTESIAN_POINT('',(0.15,5.754929235303E-33,-3.9)); +#22693 = DIRECTION('',(6.162975822039E-32,1.,4.08046586736E-33)); +#22694 = DIRECTION('',(1.,-6.162975822039E-32,-8.217301096052E-33)); +#22695 = ORIENTED_EDGE('',*,*,#22434,.F.); +#22696 = ORIENTED_EDGE('',*,*,#22689,.T.); +#22697 = TOROIDAL_SURFACE('',#22698,0.15,0.1); +#22698 = AXIS2_PLACEMENT_3D('',#22699,#22700,#22701); +#22699 = CARTESIAN_POINT('',(-3.615612482263E-32,1.499939296836E-32,-3.9 + )); +#22700 = DIRECTION('',(-8.217301096052E-33,4.08046586736E-33,-1.)); +#22701 = DIRECTION('',(1.,-6.162975822039E-32,-8.217301096052E-33)); +#22702 = ADVANCED_FACE('',(#22703),#22713,.F.); +#22703 = FACE_BOUND('',#22704,.F.); +#22704 = EDGE_LOOP('',(#22705,#22706,#22707,#22708,#22709,#22710,#22711, + #22712)); +#22705 = ORIENTED_EDGE('',*,*,#22544,.T.); +#22706 = ORIENTED_EDGE('',*,*,#22483,.T.); +#22707 = ORIENTED_EDGE('',*,*,#22459,.T.); +#22708 = ORIENTED_EDGE('',*,*,#22509,.T.); +#22709 = ORIENTED_EDGE('',*,*,#22561,.T.); +#22710 = ORIENTED_EDGE('',*,*,#22611,.T.); +#22711 = ORIENTED_EDGE('',*,*,#22638,.T.); +#22712 = ORIENTED_EDGE('',*,*,#22585,.T.); +#22713 = PLANE('',#22714); +#22714 = AXIS2_PLACEMENT_3D('',#22715,#22716,#22717); +#22715 = CARTESIAN_POINT('',(2.49,2.25,10.5)); +#22716 = DIRECTION('',(-0.,-0.,-1.)); +#22717 = DIRECTION('',(-1.,0.,0.)); +#22718 = ADVANCED_FACE('',(#22719),#22722,.F.); +#22719 = FACE_BOUND('',#22720,.F.); +#22720 = EDGE_LOOP('',(#22721)); +#22721 = ORIENTED_EDGE('',*,*,#22654,.T.); +#22722 = PLANE('',#22723); +#22723 = AXIS2_PLACEMENT_3D('',#22724,#22725,#22726); +#22724 = CARTESIAN_POINT('',(2.54,2.18439881135E-17,-4.)); +#22725 = DIRECTION('',(-3.985391031585E-31,-4.08046586736E-33,1.)); +#22726 = DIRECTION('',(1.,0.,3.985391031585E-31)); +#22727 = ADVANCED_FACE('',(#22728),#22731,.F.); +#22728 = FACE_BOUND('',#22729,.F.); +#22729 = EDGE_LOOP('',(#22730)); +#22730 = ORIENTED_EDGE('',*,*,#22680,.T.); +#22731 = PLANE('',#22732); +#22732 = AXIS2_PLACEMENT_3D('',#22733,#22734,#22735); +#22733 = CARTESIAN_POINT('',(-1.60246890532E-17,2.18439881135E-17,-4.)); +#22734 = DIRECTION('',(8.217301096052E-33,-4.08046586736E-33,1.)); +#22735 = DIRECTION('',(1.,0.,-8.217301096052E-33)); +#22736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#22740)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#22737,#22738,#22739)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#22737 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#22738 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#22739 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#22740 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#22737, + 'distance_accuracy_value','confusion accuracy'); +#22741 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#22742,#22744); +#22742 = ( REPRESENTATION_RELATIONSHIP('','',#22028,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#22743) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#22743 = ITEM_DEFINED_TRANSFORMATION('','',#11,#115); +#22744 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #22745); +#22745 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('26','PS1','',#5,#22023,$); +#22746 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#22025)); +#22747 = SHAPE_DEFINITION_REPRESENTATION(#22748,#22754); +#22748 = PRODUCT_DEFINITION_SHAPE('','',#22749); +#22749 = PRODUCT_DEFINITION('design','',#22750,#22753); +#22750 = PRODUCT_DEFINITION_FORMATION('','',#22751); +#22751 = PRODUCT('SOT-23','SOT-23','',(#22752)); +#22752 = PRODUCT_CONTEXT('',#2,'mechanical'); +#22753 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#22754 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#22755),#24737); +#22755 = MANIFOLD_SOLID_BREP('',#22756); +#22756 = CLOSED_SHELL('',(#22757,#22795,#22858,#22881,#22910,#22933, + #22988,#23027,#23050,#23073,#23090,#23113,#23201,#23217,#23247, + #23280,#23311,#23344,#23361,#23378,#23411,#23441,#23464,#23487, + #23504,#23533,#23587,#23610,#23633,#23656,#23695,#23717,#23761, + #23836,#23860,#23928,#23945,#24020,#24044,#24112,#24187,#24211, + #24279,#24296,#24313,#24359,#24375,#24391,#24408,#24420,#24437, + #24454,#24471,#24488,#24505,#24522,#24534,#24551,#24568,#24585, + #24602,#24619,#24631,#24648,#24665,#24682,#24699,#24716,#24728)); +#22757 = ADVANCED_FACE('',(#22758),#22790,.F.); +#22758 = FACE_BOUND('',#22759,.F.); +#22759 = EDGE_LOOP('',(#22760,#22770,#22777,#22785)); +#22760 = ORIENTED_EDGE('',*,*,#22761,.T.); +#22761 = EDGE_CURVE('',#22762,#22764,#22766,.T.); +#22762 = VERTEX_POINT('',#22763); +#22763 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#22764 = VERTEX_POINT('',#22765); +#22765 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#22766 = LINE('',#22767,#22768); +#22767 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#22768 = VECTOR('',#22769,1.); +#22769 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#22770 = ORIENTED_EDGE('',*,*,#22771,.T.); +#22771 = EDGE_CURVE('',#22764,#22772,#22774,.T.); +#22772 = VERTEX_POINT('',#22773); +#22773 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#22774 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22775,#22776),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22775 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#22776 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#22777 = ORIENTED_EDGE('',*,*,#22778,.F.); +#22778 = EDGE_CURVE('',#22779,#22772,#22781,.T.); +#22779 = VERTEX_POINT('',#22780); +#22780 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#22781 = LINE('',#22782,#22783); +#22782 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#22783 = VECTOR('',#22784,1.); +#22784 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#22785 = ORIENTED_EDGE('',*,*,#22786,.F.); +#22786 = EDGE_CURVE('',#22762,#22779,#22787,.T.); +#22787 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22788,#22789),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22788 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#22789 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#22790 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#22791,#22792) + ,(#22793,#22794 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#22791 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#22792 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#22793 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#22794 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#22795 = ADVANCED_FACE('',(#22796),#22853,.T.); +#22796 = FACE_BOUND('',#22797,.T.); +#22797 = EDGE_LOOP('',(#22798,#22799,#22807,#22815,#22823,#22831,#22839, + #22847)); +#22798 = ORIENTED_EDGE('',*,*,#22761,.T.); +#22799 = ORIENTED_EDGE('',*,*,#22800,.T.); +#22800 = EDGE_CURVE('',#22764,#22801,#22803,.T.); +#22801 = VERTEX_POINT('',#22802); +#22802 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#22803 = LINE('',#22804,#22805); +#22804 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#22805 = VECTOR('',#22806,1.); +#22806 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#22807 = ORIENTED_EDGE('',*,*,#22808,.T.); +#22808 = EDGE_CURVE('',#22801,#22809,#22811,.T.); +#22809 = VERTEX_POINT('',#22810); +#22810 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#22811 = LINE('',#22812,#22813); +#22812 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#22813 = VECTOR('',#22814,1.); +#22814 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#22815 = ORIENTED_EDGE('',*,*,#22816,.T.); +#22816 = EDGE_CURVE('',#22809,#22817,#22819,.T.); +#22817 = VERTEX_POINT('',#22818); +#22818 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#22819 = LINE('',#22820,#22821); +#22820 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#22821 = VECTOR('',#22822,1.); +#22822 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#22823 = ORIENTED_EDGE('',*,*,#22824,.T.); +#22824 = EDGE_CURVE('',#22817,#22825,#22827,.T.); +#22825 = VERTEX_POINT('',#22826); +#22826 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#22827 = LINE('',#22828,#22829); +#22828 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#22829 = VECTOR('',#22830,1.); +#22830 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#22831 = ORIENTED_EDGE('',*,*,#22832,.T.); +#22832 = EDGE_CURVE('',#22825,#22833,#22835,.T.); +#22833 = VERTEX_POINT('',#22834); +#22834 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#22835 = LINE('',#22836,#22837); +#22836 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#22837 = VECTOR('',#22838,1.); +#22838 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#22839 = ORIENTED_EDGE('',*,*,#22840,.T.); +#22840 = EDGE_CURVE('',#22833,#22841,#22843,.T.); +#22841 = VERTEX_POINT('',#22842); +#22842 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#22843 = LINE('',#22844,#22845); +#22844 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#22845 = VECTOR('',#22846,1.); +#22846 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#22847 = ORIENTED_EDGE('',*,*,#22848,.T.); +#22848 = EDGE_CURVE('',#22841,#22762,#22849,.T.); +#22849 = LINE('',#22850,#22851); +#22850 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#22851 = VECTOR('',#22852,1.); +#22852 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#22853 = PLANE('',#22854); +#22854 = AXIS2_PLACEMENT_3D('',#22855,#22856,#22857); +#22855 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#22856 = DIRECTION('',(0.,0.,-1.)); +#22857 = DIRECTION('',(0.370454302632,-0.928850692879,0.)); +#22858 = ADVANCED_FACE('',(#22859),#22876,.F.); +#22859 = FACE_BOUND('',#22860,.F.); +#22860 = EDGE_LOOP('',(#22861,#22862,#22869,#22875)); +#22861 = ORIENTED_EDGE('',*,*,#22800,.T.); +#22862 = ORIENTED_EDGE('',*,*,#22863,.T.); +#22863 = EDGE_CURVE('',#22801,#22864,#22866,.T.); +#22864 = VERTEX_POINT('',#22865); +#22865 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#22866 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22867,#22868),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22867 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#22868 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#22869 = ORIENTED_EDGE('',*,*,#22870,.F.); +#22870 = EDGE_CURVE('',#22772,#22864,#22871,.T.); +#22871 = LINE('',#22872,#22873); +#22872 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#22873 = VECTOR('',#22874,1.); +#22874 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#22875 = ORIENTED_EDGE('',*,*,#22771,.F.); +#22876 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#22877,#22878) + ,(#22879,#22880 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#22877 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#22878 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#22879 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#22880 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#22881 = ADVANCED_FACE('',(#22882),#22905,.F.); +#22882 = FACE_BOUND('',#22883,.F.); +#22883 = EDGE_LOOP('',(#22884,#22885,#22892,#22900)); +#22884 = ORIENTED_EDGE('',*,*,#22778,.T.); +#22885 = ORIENTED_EDGE('',*,*,#22886,.T.); +#22886 = EDGE_CURVE('',#22772,#22887,#22889,.T.); +#22887 = VERTEX_POINT('',#22888); +#22888 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#22889 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22890,#22891),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22890 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#22891 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#22892 = ORIENTED_EDGE('',*,*,#22893,.F.); +#22893 = EDGE_CURVE('',#22894,#22887,#22896,.T.); +#22894 = VERTEX_POINT('',#22895); +#22895 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#22896 = LINE('',#22897,#22898); +#22897 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#22898 = VECTOR('',#22899,1.); +#22899 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#22900 = ORIENTED_EDGE('',*,*,#22901,.F.); +#22901 = EDGE_CURVE('',#22779,#22894,#22902,.T.); +#22902 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22903,#22904),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22903 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#22904 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#22905 = PLANE('',#22906); +#22906 = AXIS2_PLACEMENT_3D('',#22907,#22908,#22909); +#22907 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#22908 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#22909 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#22910 = ADVANCED_FACE('',(#22911),#22928,.F.); +#22911 = FACE_BOUND('',#22912,.F.); +#22912 = EDGE_LOOP('',(#22913,#22914,#22915,#22923)); +#22913 = ORIENTED_EDGE('',*,*,#22848,.T.); +#22914 = ORIENTED_EDGE('',*,*,#22786,.T.); +#22915 = ORIENTED_EDGE('',*,*,#22916,.F.); +#22916 = EDGE_CURVE('',#22917,#22779,#22919,.T.); +#22917 = VERTEX_POINT('',#22918); +#22918 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#22919 = LINE('',#22920,#22921); +#22920 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#22921 = VECTOR('',#22922,1.); +#22922 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#22923 = ORIENTED_EDGE('',*,*,#22924,.F.); +#22924 = EDGE_CURVE('',#22841,#22917,#22925,.T.); +#22925 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22926,#22927),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22926 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#22927 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#22928 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#22929,#22930) + ,(#22931,#22932 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#22929 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#22930 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#22931 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#22932 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#22933 = ADVANCED_FACE('',(#22934),#22983,.F.); +#22934 = FACE_BOUND('',#22935,.F.); +#22935 = EDGE_LOOP('',(#22936,#22937,#22938,#22946,#22954,#22962,#22970, + #22978)); +#22936 = ORIENTED_EDGE('',*,*,#22840,.T.); +#22937 = ORIENTED_EDGE('',*,*,#22924,.T.); +#22938 = ORIENTED_EDGE('',*,*,#22939,.F.); +#22939 = EDGE_CURVE('',#22940,#22917,#22942,.T.); +#22940 = VERTEX_POINT('',#22941); +#22941 = CARTESIAN_POINT('',(-0.7,1.15,0.575)); +#22942 = LINE('',#22943,#22944); +#22943 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#22944 = VECTOR('',#22945,1.); +#22945 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#22946 = ORIENTED_EDGE('',*,*,#22947,.F.); +#22947 = EDGE_CURVE('',#22948,#22940,#22950,.T.); +#22948 = VERTEX_POINT('',#22949); +#22949 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#22950 = LINE('',#22951,#22952); +#22951 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#22952 = VECTOR('',#22953,1.); +#22953 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#22954 = ORIENTED_EDGE('',*,*,#22955,.F.); +#22955 = EDGE_CURVE('',#22956,#22948,#22958,.T.); +#22956 = VERTEX_POINT('',#22957); +#22957 = CARTESIAN_POINT('',(-0.7,-0.75,0.575)); +#22958 = LINE('',#22959,#22960); +#22959 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#22960 = VECTOR('',#22961,1.); +#22961 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#22962 = ORIENTED_EDGE('',*,*,#22963,.F.); +#22963 = EDGE_CURVE('',#22964,#22956,#22966,.T.); +#22964 = VERTEX_POINT('',#22965); +#22965 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#22966 = LINE('',#22967,#22968); +#22967 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#22968 = VECTOR('',#22969,1.); +#22969 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#22970 = ORIENTED_EDGE('',*,*,#22971,.F.); +#22971 = EDGE_CURVE('',#22972,#22964,#22974,.T.); +#22972 = VERTEX_POINT('',#22973); +#22973 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#22974 = LINE('',#22975,#22976); +#22975 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#22976 = VECTOR('',#22977,1.); +#22977 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#22978 = ORIENTED_EDGE('',*,*,#22979,.F.); +#22979 = EDGE_CURVE('',#22833,#22972,#22980,.T.); +#22980 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22981,#22982),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22981 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#22982 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#22983 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#22984,#22985) + ,(#22986,#22987 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#22984 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#22985 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#22986 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#22987 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#22988 = ADVANCED_FACE('',(#22989),#23022,.F.); +#22989 = FACE_BOUND('',#22990,.F.); +#22990 = EDGE_LOOP('',(#22991,#22992,#22999,#23007,#23015,#23021)); +#22991 = ORIENTED_EDGE('',*,*,#22808,.T.); +#22992 = ORIENTED_EDGE('',*,*,#22993,.T.); +#22993 = EDGE_CURVE('',#22809,#22994,#22996,.T.); +#22994 = VERTEX_POINT('',#22995); +#22995 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#22996 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22997,#22998),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22997 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#22998 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#22999 = ORIENTED_EDGE('',*,*,#23000,.F.); +#23000 = EDGE_CURVE('',#23001,#22994,#23003,.T.); +#23001 = VERTEX_POINT('',#23002); +#23002 = CARTESIAN_POINT('',(0.7,-0.2,0.575)); +#23003 = LINE('',#23004,#23005); +#23004 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#23005 = VECTOR('',#23006,1.); +#23006 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23007 = ORIENTED_EDGE('',*,*,#23008,.F.); +#23008 = EDGE_CURVE('',#23009,#23001,#23011,.T.); +#23009 = VERTEX_POINT('',#23010); +#23010 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#23011 = LINE('',#23012,#23013); +#23012 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#23013 = VECTOR('',#23014,1.); +#23014 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23015 = ORIENTED_EDGE('',*,*,#23016,.F.); +#23016 = EDGE_CURVE('',#22864,#23009,#23017,.T.); +#23017 = LINE('',#23018,#23019); +#23018 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#23019 = VECTOR('',#23020,1.); +#23020 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23021 = ORIENTED_EDGE('',*,*,#22863,.F.); +#23022 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23023,#23024) + ,(#23025,#23026 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23023 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#23024 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#23025 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#23026 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#23027 = ADVANCED_FACE('',(#23028),#23045,.F.); +#23028 = FACE_BOUND('',#23029,.F.); +#23029 = EDGE_LOOP('',(#23030,#23031,#23032,#23040)); +#23030 = ORIENTED_EDGE('',*,*,#22832,.T.); +#23031 = ORIENTED_EDGE('',*,*,#22979,.T.); +#23032 = ORIENTED_EDGE('',*,*,#23033,.F.); +#23033 = EDGE_CURVE('',#23034,#22972,#23036,.T.); +#23034 = VERTEX_POINT('',#23035); +#23035 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#23036 = LINE('',#23037,#23038); +#23037 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#23038 = VECTOR('',#23039,1.); +#23039 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#23040 = ORIENTED_EDGE('',*,*,#23041,.F.); +#23041 = EDGE_CURVE('',#22825,#23034,#23042,.T.); +#23042 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23043,#23044),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23043 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#23044 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#23045 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23046,#23047) + ,(#23048,#23049 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#23046 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#23047 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#23048 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#23049 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#23050 = ADVANCED_FACE('',(#23051),#23068,.F.); +#23051 = FACE_BOUND('',#23052,.F.); +#23052 = EDGE_LOOP('',(#23053,#23054,#23061,#23067)); +#23053 = ORIENTED_EDGE('',*,*,#22816,.T.); +#23054 = ORIENTED_EDGE('',*,*,#23055,.T.); +#23055 = EDGE_CURVE('',#22817,#23056,#23058,.T.); +#23056 = VERTEX_POINT('',#23057); +#23057 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#23058 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23059,#23060),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23059 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#23060 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#23061 = ORIENTED_EDGE('',*,*,#23062,.F.); +#23062 = EDGE_CURVE('',#22994,#23056,#23063,.T.); +#23063 = LINE('',#23064,#23065); +#23064 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#23065 = VECTOR('',#23066,1.); +#23066 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23067 = ORIENTED_EDGE('',*,*,#22993,.F.); +#23068 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23069,#23070) + ,(#23071,#23072 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#23069 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#23070 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#23071 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#23072 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#23073 = ADVANCED_FACE('',(#23074),#23085,.F.); +#23074 = FACE_BOUND('',#23075,.F.); +#23075 = EDGE_LOOP('',(#23076,#23077,#23078,#23084)); +#23076 = ORIENTED_EDGE('',*,*,#22824,.T.); +#23077 = ORIENTED_EDGE('',*,*,#23041,.T.); +#23078 = ORIENTED_EDGE('',*,*,#23079,.F.); +#23079 = EDGE_CURVE('',#23056,#23034,#23080,.T.); +#23080 = LINE('',#23081,#23082); +#23081 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#23082 = VECTOR('',#23083,1.); +#23083 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#23084 = ORIENTED_EDGE('',*,*,#23055,.F.); +#23085 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23086,#23087) + ,(#23088,#23089 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23086 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#23087 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#23088 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#23089 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#23090 = ADVANCED_FACE('',(#23091),#23108,.F.); +#23091 = FACE_BOUND('',#23092,.F.); +#23092 = EDGE_LOOP('',(#23093,#23094,#23101,#23107)); +#23093 = ORIENTED_EDGE('',*,*,#22870,.T.); +#23094 = ORIENTED_EDGE('',*,*,#23095,.T.); +#23095 = EDGE_CURVE('',#22864,#23096,#23098,.T.); +#23096 = VERTEX_POINT('',#23097); +#23097 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#23098 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23099,#23100),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23099 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#23100 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#23101 = ORIENTED_EDGE('',*,*,#23102,.F.); +#23102 = EDGE_CURVE('',#22887,#23096,#23103,.T.); +#23103 = LINE('',#23104,#23105); +#23104 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#23105 = VECTOR('',#23106,1.); +#23106 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23107 = ORIENTED_EDGE('',*,*,#22886,.F.); +#23108 = PLANE('',#23109); +#23109 = AXIS2_PLACEMENT_3D('',#23110,#23111,#23112); +#23110 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#23111 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23112 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23113 = ADVANCED_FACE('',(#23114),#23196,.F.); +#23114 = FACE_BOUND('',#23115,.F.); +#23115 = EDGE_LOOP('',(#23116,#23124,#23125,#23126,#23134,#23142,#23150, + #23158,#23166,#23174,#23182,#23190)); +#23116 = ORIENTED_EDGE('',*,*,#23117,.T.); +#23117 = EDGE_CURVE('',#23118,#22894,#23120,.T.); +#23118 = VERTEX_POINT('',#23119); +#23119 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#23120 = LINE('',#23121,#23122); +#23121 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#23122 = VECTOR('',#23123,1.); +#23123 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#23124 = ORIENTED_EDGE('',*,*,#22893,.T.); +#23125 = ORIENTED_EDGE('',*,*,#23102,.T.); +#23126 = ORIENTED_EDGE('',*,*,#23127,.T.); +#23127 = EDGE_CURVE('',#23096,#23128,#23130,.T.); +#23128 = VERTEX_POINT('',#23129); +#23129 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#23130 = LINE('',#23131,#23132); +#23131 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#23132 = VECTOR('',#23133,1.); +#23133 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23134 = ORIENTED_EDGE('',*,*,#23135,.T.); +#23135 = EDGE_CURVE('',#23128,#23136,#23138,.T.); +#23136 = VERTEX_POINT('',#23137); +#23137 = CARTESIAN_POINT('',(0.675,0.2,0.725)); +#23138 = LINE('',#23139,#23140); +#23139 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#23140 = VECTOR('',#23141,1.); +#23141 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#23142 = ORIENTED_EDGE('',*,*,#23143,.F.); +#23143 = EDGE_CURVE('',#23144,#23136,#23146,.T.); +#23144 = VERTEX_POINT('',#23145); +#23145 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#23146 = LINE('',#23147,#23148); +#23147 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#23148 = VECTOR('',#23149,1.); +#23149 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23150 = ORIENTED_EDGE('',*,*,#23151,.F.); +#23151 = EDGE_CURVE('',#23152,#23144,#23154,.T.); +#23152 = VERTEX_POINT('',#23153); +#23153 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#23154 = LINE('',#23155,#23156); +#23155 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#23156 = VECTOR('',#23157,1.); +#23157 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23158 = ORIENTED_EDGE('',*,*,#23159,.F.); +#23159 = EDGE_CURVE('',#23160,#23152,#23162,.T.); +#23160 = VERTEX_POINT('',#23161); +#23161 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#23162 = LINE('',#23163,#23164); +#23163 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#23164 = VECTOR('',#23165,1.); +#23165 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#23166 = ORIENTED_EDGE('',*,*,#23167,.F.); +#23167 = EDGE_CURVE('',#23168,#23160,#23170,.T.); +#23168 = VERTEX_POINT('',#23169); +#23169 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#23170 = LINE('',#23171,#23172); +#23171 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#23172 = VECTOR('',#23173,1.); +#23173 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#23174 = ORIENTED_EDGE('',*,*,#23175,.F.); +#23175 = EDGE_CURVE('',#23176,#23168,#23178,.T.); +#23176 = VERTEX_POINT('',#23177); +#23177 = CARTESIAN_POINT('',(-0.675,1.15,0.725)); +#23178 = LINE('',#23179,#23180); +#23179 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#23180 = VECTOR('',#23181,1.); +#23181 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23182 = ORIENTED_EDGE('',*,*,#23183,.F.); +#23183 = EDGE_CURVE('',#23184,#23176,#23186,.T.); +#23184 = VERTEX_POINT('',#23185); +#23185 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#23186 = LINE('',#23187,#23188); +#23187 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#23188 = VECTOR('',#23189,1.); +#23189 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#23190 = ORIENTED_EDGE('',*,*,#23191,.T.); +#23191 = EDGE_CURVE('',#23184,#23118,#23192,.T.); +#23192 = LINE('',#23193,#23194); +#23193 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#23194 = VECTOR('',#23195,1.); +#23195 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23196 = PLANE('',#23197); +#23197 = AXIS2_PLACEMENT_3D('',#23198,#23199,#23200); +#23198 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#23199 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#23200 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#23201 = ADVANCED_FACE('',(#23202),#23212,.F.); +#23202 = FACE_BOUND('',#23203,.F.); +#23203 = EDGE_LOOP('',(#23204,#23205,#23206,#23207)); +#23204 = ORIENTED_EDGE('',*,*,#22916,.T.); +#23205 = ORIENTED_EDGE('',*,*,#22901,.T.); +#23206 = ORIENTED_EDGE('',*,*,#23117,.F.); +#23207 = ORIENTED_EDGE('',*,*,#23208,.F.); +#23208 = EDGE_CURVE('',#22917,#23118,#23209,.T.); +#23209 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23210,#23211),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23210 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#23211 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#23212 = PLANE('',#23213); +#23213 = AXIS2_PLACEMENT_3D('',#23214,#23215,#23216); +#23214 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#23215 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23216 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#23217 = ADVANCED_FACE('',(#23218),#23242,.F.); +#23218 = FACE_BOUND('',#23219,.F.); +#23219 = EDGE_LOOP('',(#23220,#23227,#23228,#23236)); +#23220 = ORIENTED_EDGE('',*,*,#23221,.F.); +#23221 = EDGE_CURVE('',#22972,#23222,#23224,.T.); +#23222 = VERTEX_POINT('',#23223); +#23223 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#23224 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23225,#23226),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23225 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#23226 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#23227 = ORIENTED_EDGE('',*,*,#22971,.T.); +#23228 = ORIENTED_EDGE('',*,*,#23229,.T.); +#23229 = EDGE_CURVE('',#22964,#23230,#23232,.T.); +#23230 = VERTEX_POINT('',#23231); +#23231 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#23232 = LINE('',#23233,#23234); +#23233 = CARTESIAN_POINT('',(-0.7,-1.15,0.529763586955)); +#23234 = VECTOR('',#23235,1.); +#23235 = DIRECTION('',(0.,0.,1.)); +#23236 = ORIENTED_EDGE('',*,*,#23237,.F.); +#23237 = EDGE_CURVE('',#23222,#23230,#23238,.T.); +#23238 = LINE('',#23239,#23240); +#23239 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#23240 = VECTOR('',#23241,1.); +#23241 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23242 = PLANE('',#23243); +#23243 = AXIS2_PLACEMENT_3D('',#23244,#23245,#23246); +#23244 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#23245 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#23246 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23247 = ADVANCED_FACE('',(#23248),#23275,.F.); +#23248 = FACE_BOUND('',#23249,.F.); +#23249 = EDGE_LOOP('',(#23250,#23251,#23260,#23268)); +#23250 = ORIENTED_EDGE('',*,*,#22963,.T.); +#23251 = ORIENTED_EDGE('',*,*,#23252,.T.); +#23252 = EDGE_CURVE('',#22956,#23253,#23255,.T.); +#23253 = VERTEX_POINT('',#23254); +#23254 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#23255 = CIRCLE('',#23256,0.1); +#23256 = AXIS2_PLACEMENT_3D('',#23257,#23258,#23259); +#23257 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#23258 = DIRECTION('',(-1.144237745222E-17,-1.,-5.473822126269E-48)); +#23259 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#23260 = ORIENTED_EDGE('',*,*,#23261,.F.); +#23261 = EDGE_CURVE('',#23262,#23253,#23264,.T.); +#23262 = VERTEX_POINT('',#23263); +#23263 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#23264 = LINE('',#23265,#23266); +#23265 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#23266 = VECTOR('',#23267,1.); +#23267 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#23268 = ORIENTED_EDGE('',*,*,#23269,.F.); +#23269 = EDGE_CURVE('',#22964,#23262,#23270,.T.); +#23270 = CIRCLE('',#23271,0.1); +#23271 = AXIS2_PLACEMENT_3D('',#23272,#23273,#23274); +#23272 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#23273 = DIRECTION('',(-1.144237745222E-17,-1.,-5.473822126269E-48)); +#23274 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#23275 = CYLINDRICAL_SURFACE('',#23276,0.1); +#23276 = AXIS2_PLACEMENT_3D('',#23277,#23278,#23279); +#23277 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#23278 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#23279 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#23280 = ADVANCED_FACE('',(#23281),#23306,.F.); +#23281 = FACE_BOUND('',#23282,.F.); +#23282 = EDGE_LOOP('',(#23283,#23291,#23292,#23300)); +#23283 = ORIENTED_EDGE('',*,*,#23284,.F.); +#23284 = EDGE_CURVE('',#22956,#23285,#23287,.T.); +#23285 = VERTEX_POINT('',#23286); +#23286 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#23287 = LINE('',#23288,#23289); +#23288 = CARTESIAN_POINT('',(-0.7,-0.75,0.529763586955)); +#23289 = VECTOR('',#23290,1.); +#23290 = DIRECTION('',(0.,0.,1.)); +#23291 = ORIENTED_EDGE('',*,*,#22955,.T.); +#23292 = ORIENTED_EDGE('',*,*,#23293,.T.); +#23293 = EDGE_CURVE('',#22948,#23294,#23296,.T.); +#23294 = VERTEX_POINT('',#23295); +#23295 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#23296 = LINE('',#23297,#23298); +#23297 = CARTESIAN_POINT('',(-0.7,0.75,0.529763586955)); +#23298 = VECTOR('',#23299,1.); +#23299 = DIRECTION('',(0.,0.,1.)); +#23300 = ORIENTED_EDGE('',*,*,#23301,.F.); +#23301 = EDGE_CURVE('',#23285,#23294,#23302,.T.); +#23302 = LINE('',#23303,#23304); +#23303 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#23304 = VECTOR('',#23305,1.); +#23305 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23306 = PLANE('',#23307); +#23307 = AXIS2_PLACEMENT_3D('',#23308,#23309,#23310); +#23308 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#23309 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#23310 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23311 = ADVANCED_FACE('',(#23312),#23339,.F.); +#23312 = FACE_BOUND('',#23313,.F.); +#23313 = EDGE_LOOP('',(#23314,#23315,#23324,#23332)); +#23314 = ORIENTED_EDGE('',*,*,#22947,.T.); +#23315 = ORIENTED_EDGE('',*,*,#23316,.T.); +#23316 = EDGE_CURVE('',#22940,#23317,#23319,.T.); +#23317 = VERTEX_POINT('',#23318); +#23318 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#23319 = CIRCLE('',#23320,0.1); +#23320 = AXIS2_PLACEMENT_3D('',#23321,#23322,#23323); +#23321 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#23322 = DIRECTION('',(-1.144237745222E-17,-1.,-5.473822126269E-48)); +#23323 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#23324 = ORIENTED_EDGE('',*,*,#23325,.F.); +#23325 = EDGE_CURVE('',#23326,#23317,#23328,.T.); +#23326 = VERTEX_POINT('',#23327); +#23327 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#23328 = LINE('',#23329,#23330); +#23329 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#23330 = VECTOR('',#23331,1.); +#23331 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#23332 = ORIENTED_EDGE('',*,*,#23333,.F.); +#23333 = EDGE_CURVE('',#22948,#23326,#23334,.T.); +#23334 = CIRCLE('',#23335,0.1); +#23335 = AXIS2_PLACEMENT_3D('',#23336,#23337,#23338); +#23336 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#23337 = DIRECTION('',(-1.144237745222E-17,-1.,-5.473822126269E-48)); +#23338 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#23339 = CYLINDRICAL_SURFACE('',#23340,0.1); +#23340 = AXIS2_PLACEMENT_3D('',#23341,#23342,#23343); +#23341 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#23342 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#23343 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#23344 = ADVANCED_FACE('',(#23345),#23356,.F.); +#23345 = FACE_BOUND('',#23346,.F.); +#23346 = EDGE_LOOP('',(#23347,#23353,#23354,#23355)); +#23347 = ORIENTED_EDGE('',*,*,#23348,.F.); +#23348 = EDGE_CURVE('',#22940,#23184,#23349,.T.); +#23349 = LINE('',#23350,#23351); +#23350 = CARTESIAN_POINT('',(-0.7,1.15,0.529763586955)); +#23351 = VECTOR('',#23352,1.); +#23352 = DIRECTION('',(0.,0.,1.)); +#23353 = ORIENTED_EDGE('',*,*,#22939,.T.); +#23354 = ORIENTED_EDGE('',*,*,#23208,.T.); +#23355 = ORIENTED_EDGE('',*,*,#23191,.F.); +#23356 = PLANE('',#23357); +#23357 = AXIS2_PLACEMENT_3D('',#23358,#23359,#23360); +#23358 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#23359 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#23360 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23361 = ADVANCED_FACE('',(#23362),#23373,.F.); +#23362 = FACE_BOUND('',#23363,.F.); +#23363 = EDGE_LOOP('',(#23364,#23365,#23366,#23372)); +#23364 = ORIENTED_EDGE('',*,*,#23095,.F.); +#23365 = ORIENTED_EDGE('',*,*,#23016,.T.); +#23366 = ORIENTED_EDGE('',*,*,#23367,.T.); +#23367 = EDGE_CURVE('',#23009,#23128,#23368,.T.); +#23368 = LINE('',#23369,#23370); +#23369 = CARTESIAN_POINT('',(0.7,0.2,0.529763586955)); +#23370 = VECTOR('',#23371,1.); +#23371 = DIRECTION('',(0.,0.,1.)); +#23372 = ORIENTED_EDGE('',*,*,#23127,.F.); +#23373 = PLANE('',#23374); +#23374 = AXIS2_PLACEMENT_3D('',#23375,#23376,#23377); +#23375 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#23376 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#23377 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23378 = ADVANCED_FACE('',(#23379),#23406,.F.); +#23379 = FACE_BOUND('',#23380,.F.); +#23380 = EDGE_LOOP('',(#23381,#23382,#23391,#23399)); +#23381 = ORIENTED_EDGE('',*,*,#23008,.T.); +#23382 = ORIENTED_EDGE('',*,*,#23383,.T.); +#23383 = EDGE_CURVE('',#23001,#23384,#23386,.T.); +#23384 = VERTEX_POINT('',#23385); +#23385 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#23386 = CIRCLE('',#23387,0.1); +#23387 = AXIS2_PLACEMENT_3D('',#23388,#23389,#23390); +#23388 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#23389 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23390 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#23391 = ORIENTED_EDGE('',*,*,#23392,.F.); +#23392 = EDGE_CURVE('',#23393,#23384,#23395,.T.); +#23393 = VERTEX_POINT('',#23394); +#23394 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#23395 = LINE('',#23396,#23397); +#23396 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#23397 = VECTOR('',#23398,1.); +#23398 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23399 = ORIENTED_EDGE('',*,*,#23400,.F.); +#23400 = EDGE_CURVE('',#23009,#23393,#23401,.T.); +#23401 = CIRCLE('',#23402,0.1); +#23402 = AXIS2_PLACEMENT_3D('',#23403,#23404,#23405); +#23403 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#23404 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23405 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#23406 = CYLINDRICAL_SURFACE('',#23407,0.1); +#23407 = AXIS2_PLACEMENT_3D('',#23408,#23409,#23410); +#23408 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#23409 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23410 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#23411 = ADVANCED_FACE('',(#23412),#23436,.F.); +#23412 = FACE_BOUND('',#23413,.F.); +#23413 = EDGE_LOOP('',(#23414,#23422,#23423,#23430)); +#23414 = ORIENTED_EDGE('',*,*,#23415,.F.); +#23415 = EDGE_CURVE('',#23001,#23416,#23418,.T.); +#23416 = VERTEX_POINT('',#23417); +#23417 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#23418 = LINE('',#23419,#23420); +#23419 = CARTESIAN_POINT('',(0.7,-0.2,0.529763586955)); +#23420 = VECTOR('',#23421,1.); +#23421 = DIRECTION('',(0.,0.,1.)); +#23422 = ORIENTED_EDGE('',*,*,#23000,.T.); +#23423 = ORIENTED_EDGE('',*,*,#23424,.T.); +#23424 = EDGE_CURVE('',#22994,#23425,#23427,.T.); +#23425 = VERTEX_POINT('',#23426); +#23426 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#23427 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23428,#23429),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23428 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#23429 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#23430 = ORIENTED_EDGE('',*,*,#23431,.F.); +#23431 = EDGE_CURVE('',#23416,#23425,#23432,.T.); +#23432 = LINE('',#23433,#23434); +#23433 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#23434 = VECTOR('',#23435,1.); +#23435 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23436 = PLANE('',#23437); +#23437 = AXIS2_PLACEMENT_3D('',#23438,#23439,#23440); +#23438 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#23439 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#23440 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23441 = ADVANCED_FACE('',(#23442),#23459,.F.); +#23442 = FACE_BOUND('',#23443,.F.); +#23443 = EDGE_LOOP('',(#23444,#23445,#23446,#23454)); +#23444 = ORIENTED_EDGE('',*,*,#23033,.T.); +#23445 = ORIENTED_EDGE('',*,*,#23221,.T.); +#23446 = ORIENTED_EDGE('',*,*,#23447,.F.); +#23447 = EDGE_CURVE('',#23448,#23222,#23450,.T.); +#23448 = VERTEX_POINT('',#23449); +#23449 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#23450 = LINE('',#23451,#23452); +#23451 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#23452 = VECTOR('',#23453,1.); +#23453 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#23454 = ORIENTED_EDGE('',*,*,#23455,.F.); +#23455 = EDGE_CURVE('',#23034,#23448,#23456,.T.); +#23456 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23457,#23458),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23457 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#23458 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#23459 = PLANE('',#23460); +#23460 = AXIS2_PLACEMENT_3D('',#23461,#23462,#23463); +#23461 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#23462 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#23463 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#23464 = ADVANCED_FACE('',(#23465),#23482,.F.); +#23465 = FACE_BOUND('',#23466,.F.); +#23466 = EDGE_LOOP('',(#23467,#23468,#23475,#23481)); +#23467 = ORIENTED_EDGE('',*,*,#23062,.T.); +#23468 = ORIENTED_EDGE('',*,*,#23469,.T.); +#23469 = EDGE_CURVE('',#23056,#23470,#23472,.T.); +#23470 = VERTEX_POINT('',#23471); +#23471 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#23472 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23473,#23474),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23473 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#23474 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#23475 = ORIENTED_EDGE('',*,*,#23476,.F.); +#23476 = EDGE_CURVE('',#23425,#23470,#23477,.T.); +#23477 = LINE('',#23478,#23479); +#23478 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#23479 = VECTOR('',#23480,1.); +#23480 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23481 = ORIENTED_EDGE('',*,*,#23424,.F.); +#23482 = PLANE('',#23483); +#23483 = AXIS2_PLACEMENT_3D('',#23484,#23485,#23486); +#23484 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#23485 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#23486 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23487 = ADVANCED_FACE('',(#23488),#23499,.F.); +#23488 = FACE_BOUND('',#23489,.F.); +#23489 = EDGE_LOOP('',(#23490,#23491,#23492,#23498)); +#23490 = ORIENTED_EDGE('',*,*,#23079,.T.); +#23491 = ORIENTED_EDGE('',*,*,#23455,.T.); +#23492 = ORIENTED_EDGE('',*,*,#23493,.F.); +#23493 = EDGE_CURVE('',#23470,#23448,#23494,.T.); +#23494 = LINE('',#23495,#23496); +#23495 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#23496 = VECTOR('',#23497,1.); +#23497 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#23498 = ORIENTED_EDGE('',*,*,#23469,.F.); +#23499 = PLANE('',#23500); +#23500 = AXIS2_PLACEMENT_3D('',#23501,#23502,#23503); +#23501 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#23502 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23503 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#23504 = ADVANCED_FACE('',(#23505),#23528,.F.); +#23505 = FACE_BOUND('',#23506,.F.); +#23506 = EDGE_LOOP('',(#23507,#23515,#23521,#23522)); +#23507 = ORIENTED_EDGE('',*,*,#23508,.F.); +#23508 = EDGE_CURVE('',#23294,#23509,#23511,.T.); +#23509 = VERTEX_POINT('',#23510); +#23510 = CARTESIAN_POINT('',(-0.675,0.75,0.725)); +#23511 = LINE('',#23512,#23513); +#23512 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#23513 = VECTOR('',#23514,1.); +#23514 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#23515 = ORIENTED_EDGE('',*,*,#23516,.T.); +#23516 = EDGE_CURVE('',#23294,#23184,#23517,.T.); +#23517 = LINE('',#23518,#23519); +#23518 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#23519 = VECTOR('',#23520,1.); +#23520 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#23521 = ORIENTED_EDGE('',*,*,#23183,.T.); +#23522 = ORIENTED_EDGE('',*,*,#23523,.F.); +#23523 = EDGE_CURVE('',#23509,#23176,#23524,.T.); +#23524 = LINE('',#23525,#23526); +#23525 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#23526 = VECTOR('',#23527,1.); +#23527 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23528 = PLANE('',#23529); +#23529 = AXIS2_PLACEMENT_3D('',#23530,#23531,#23532); +#23530 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#23531 = DIRECTION('',(0.,0.,-1.)); +#23532 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#23533 = ADVANCED_FACE('',(#23534),#23582,.F.); +#23534 = FACE_BOUND('',#23535,.F.); +#23535 = EDGE_LOOP('',(#23536,#23546,#23554,#23560,#23561,#23562,#23569, + #23577)); +#23536 = ORIENTED_EDGE('',*,*,#23537,.T.); +#23537 = EDGE_CURVE('',#23538,#23540,#23542,.T.); +#23538 = VERTEX_POINT('',#23539); +#23539 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#23540 = VERTEX_POINT('',#23541); +#23541 = CARTESIAN_POINT('',(-0.675,-1.15,0.725)); +#23542 = LINE('',#23543,#23544); +#23543 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#23544 = VECTOR('',#23545,1.); +#23545 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23546 = ORIENTED_EDGE('',*,*,#23547,.T.); +#23547 = EDGE_CURVE('',#23540,#23548,#23550,.T.); +#23548 = VERTEX_POINT('',#23549); +#23549 = CARTESIAN_POINT('',(-0.675,-0.75,0.725)); +#23550 = LINE('',#23551,#23552); +#23551 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#23552 = VECTOR('',#23553,1.); +#23553 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23554 = ORIENTED_EDGE('',*,*,#23555,.T.); +#23555 = EDGE_CURVE('',#23548,#23509,#23556,.T.); +#23556 = LINE('',#23557,#23558); +#23557 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#23558 = VECTOR('',#23559,1.); +#23559 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23560 = ORIENTED_EDGE('',*,*,#23523,.T.); +#23561 = ORIENTED_EDGE('',*,*,#23175,.T.); +#23562 = ORIENTED_EDGE('',*,*,#23563,.T.); +#23563 = EDGE_CURVE('',#23168,#23564,#23566,.T.); +#23564 = VERTEX_POINT('',#23565); +#23565 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#23566 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23567,#23568),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23567 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#23568 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#23569 = ORIENTED_EDGE('',*,*,#23570,.F.); +#23570 = EDGE_CURVE('',#23571,#23564,#23573,.T.); +#23571 = VERTEX_POINT('',#23572); +#23572 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#23573 = LINE('',#23574,#23575); +#23574 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#23575 = VECTOR('',#23576,1.); +#23576 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#23577 = ORIENTED_EDGE('',*,*,#23578,.F.); +#23578 = EDGE_CURVE('',#23538,#23571,#23579,.T.); +#23579 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23580,#23581),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23580 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#23581 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#23582 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23583,#23584) + ,(#23585,#23586 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23583 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#23584 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#23585 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#23586 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#23587 = ADVANCED_FACE('',(#23588),#23605,.F.); +#23588 = FACE_BOUND('',#23589,.F.); +#23589 = EDGE_LOOP('',(#23590,#23591,#23598,#23604)); +#23590 = ORIENTED_EDGE('',*,*,#23167,.T.); +#23591 = ORIENTED_EDGE('',*,*,#23592,.T.); +#23592 = EDGE_CURVE('',#23160,#23593,#23595,.T.); +#23593 = VERTEX_POINT('',#23594); +#23594 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#23595 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23596,#23597),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23596 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#23597 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#23598 = ORIENTED_EDGE('',*,*,#23599,.F.); +#23599 = EDGE_CURVE('',#23564,#23593,#23600,.T.); +#23600 = LINE('',#23601,#23602); +#23601 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#23602 = VECTOR('',#23603,1.); +#23603 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#23604 = ORIENTED_EDGE('',*,*,#23563,.F.); +#23605 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23606,#23607) + ,(#23608,#23609 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#23606 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#23607 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#23608 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#23609 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#23610 = ADVANCED_FACE('',(#23611),#23628,.F.); +#23611 = FACE_BOUND('',#23612,.F.); +#23612 = EDGE_LOOP('',(#23613,#23614,#23621,#23627)); +#23613 = ORIENTED_EDGE('',*,*,#23159,.T.); +#23614 = ORIENTED_EDGE('',*,*,#23615,.T.); +#23615 = EDGE_CURVE('',#23152,#23616,#23618,.T.); +#23616 = VERTEX_POINT('',#23617); +#23617 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#23618 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23619,#23620),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23619 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#23620 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#23621 = ORIENTED_EDGE('',*,*,#23622,.F.); +#23622 = EDGE_CURVE('',#23593,#23616,#23623,.T.); +#23623 = LINE('',#23624,#23625); +#23624 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#23625 = VECTOR('',#23626,1.); +#23626 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#23627 = ORIENTED_EDGE('',*,*,#23592,.F.); +#23628 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23629,#23630) + ,(#23631,#23632 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23629 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#23630 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#23631 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#23632 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#23633 = ADVANCED_FACE('',(#23634),#23651,.F.); +#23634 = FACE_BOUND('',#23635,.F.); +#23635 = EDGE_LOOP('',(#23636,#23637,#23644,#23650)); +#23636 = ORIENTED_EDGE('',*,*,#23151,.T.); +#23637 = ORIENTED_EDGE('',*,*,#23638,.T.); +#23638 = EDGE_CURVE('',#23144,#23639,#23641,.T.); +#23639 = VERTEX_POINT('',#23640); +#23640 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#23641 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23642,#23643),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23642 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#23643 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#23644 = ORIENTED_EDGE('',*,*,#23645,.F.); +#23645 = EDGE_CURVE('',#23616,#23639,#23646,.T.); +#23646 = LINE('',#23647,#23648); +#23647 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#23648 = VECTOR('',#23649,1.); +#23649 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23650 = ORIENTED_EDGE('',*,*,#23615,.F.); +#23651 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23652,#23653) + ,(#23654,#23655 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#23652 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#23653 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#23654 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#23655 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#23656 = ADVANCED_FACE('',(#23657),#23690,.F.); +#23657 = FACE_BOUND('',#23658,.F.); +#23658 = EDGE_LOOP('',(#23659,#23660,#23668,#23676,#23683,#23689)); +#23659 = ORIENTED_EDGE('',*,*,#23143,.T.); +#23660 = ORIENTED_EDGE('',*,*,#23661,.T.); +#23661 = EDGE_CURVE('',#23136,#23662,#23664,.T.); +#23662 = VERTEX_POINT('',#23663); +#23663 = CARTESIAN_POINT('',(0.675,-0.2,0.725)); +#23664 = LINE('',#23665,#23666); +#23665 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#23666 = VECTOR('',#23667,1.); +#23667 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23668 = ORIENTED_EDGE('',*,*,#23669,.T.); +#23669 = EDGE_CURVE('',#23662,#23670,#23672,.T.); +#23670 = VERTEX_POINT('',#23671); +#23671 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#23672 = LINE('',#23673,#23674); +#23673 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#23674 = VECTOR('',#23675,1.); +#23675 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23676 = ORIENTED_EDGE('',*,*,#23677,.T.); +#23677 = EDGE_CURVE('',#23670,#23678,#23680,.T.); +#23678 = VERTEX_POINT('',#23679); +#23679 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#23680 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23681,#23682),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23681 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#23682 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#23683 = ORIENTED_EDGE('',*,*,#23684,.F.); +#23684 = EDGE_CURVE('',#23639,#23678,#23685,.T.); +#23685 = LINE('',#23686,#23687); +#23686 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#23687 = VECTOR('',#23688,1.); +#23688 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23689 = ORIENTED_EDGE('',*,*,#23638,.F.); +#23690 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23691,#23692) + ,(#23693,#23694 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23691 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#23692 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#23693 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#23694 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#23695 = ADVANCED_FACE('',(#23696),#23712,.F.); +#23696 = FACE_BOUND('',#23697,.F.); +#23697 = EDGE_LOOP('',(#23698,#23699,#23705,#23711)); +#23698 = ORIENTED_EDGE('',*,*,#23135,.F.); +#23699 = ORIENTED_EDGE('',*,*,#23700,.T.); +#23700 = EDGE_CURVE('',#23128,#23416,#23701,.T.); +#23701 = LINE('',#23702,#23703); +#23702 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#23703 = VECTOR('',#23704,1.); +#23704 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23705 = ORIENTED_EDGE('',*,*,#23706,.T.); +#23706 = EDGE_CURVE('',#23416,#23662,#23707,.T.); +#23707 = LINE('',#23708,#23709); +#23708 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#23709 = VECTOR('',#23710,1.); +#23710 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#23711 = ORIENTED_EDGE('',*,*,#23661,.F.); +#23712 = PLANE('',#23713); +#23713 = AXIS2_PLACEMENT_3D('',#23714,#23715,#23716); +#23714 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#23715 = DIRECTION('',(0.,0.,-1.)); +#23716 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#23717 = ADVANCED_FACE('',(#23718),#23756,.F.); +#23718 = FACE_BOUND('',#23719,.F.); +#23719 = EDGE_LOOP('',(#23720,#23721,#23722,#23723,#23724,#23725,#23726, + #23732,#23733,#23741,#23749,#23755)); +#23720 = ORIENTED_EDGE('',*,*,#23706,.F.); +#23721 = ORIENTED_EDGE('',*,*,#23431,.T.); +#23722 = ORIENTED_EDGE('',*,*,#23476,.T.); +#23723 = ORIENTED_EDGE('',*,*,#23493,.T.); +#23724 = ORIENTED_EDGE('',*,*,#23447,.T.); +#23725 = ORIENTED_EDGE('',*,*,#23237,.T.); +#23726 = ORIENTED_EDGE('',*,*,#23727,.T.); +#23727 = EDGE_CURVE('',#23230,#23540,#23728,.T.); +#23728 = LINE('',#23729,#23730); +#23729 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#23730 = VECTOR('',#23731,1.); +#23731 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#23732 = ORIENTED_EDGE('',*,*,#23537,.F.); +#23733 = ORIENTED_EDGE('',*,*,#23734,.F.); +#23734 = EDGE_CURVE('',#23735,#23538,#23737,.T.); +#23735 = VERTEX_POINT('',#23736); +#23736 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#23737 = LINE('',#23738,#23739); +#23738 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#23739 = VECTOR('',#23740,1.); +#23740 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#23741 = ORIENTED_EDGE('',*,*,#23742,.F.); +#23742 = EDGE_CURVE('',#23743,#23735,#23745,.T.); +#23743 = VERTEX_POINT('',#23744); +#23744 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#23745 = LINE('',#23746,#23747); +#23746 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#23747 = VECTOR('',#23748,1.); +#23748 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#23749 = ORIENTED_EDGE('',*,*,#23750,.F.); +#23750 = EDGE_CURVE('',#23670,#23743,#23751,.T.); +#23751 = LINE('',#23752,#23753); +#23752 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#23753 = VECTOR('',#23754,1.); +#23754 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23755 = ORIENTED_EDGE('',*,*,#23669,.F.); +#23756 = PLANE('',#23757); +#23757 = AXIS2_PLACEMENT_3D('',#23758,#23759,#23760); +#23758 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#23759 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#23760 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#23761 = ADVANCED_FACE('',(#23762),#23831,.F.); +#23762 = FACE_BOUND('',#23763,.F.); +#23763 = EDGE_LOOP('',(#23764,#23765,#23766,#23774,#23783,#23791,#23799, + #23807,#23816,#23824)); +#23764 = ORIENTED_EDGE('',*,*,#23229,.F.); +#23765 = ORIENTED_EDGE('',*,*,#23269,.T.); +#23766 = ORIENTED_EDGE('',*,*,#23767,.T.); +#23767 = EDGE_CURVE('',#23262,#23768,#23770,.T.); +#23768 = VERTEX_POINT('',#23769); +#23769 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#23770 = LINE('',#23771,#23772); +#23771 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#23772 = VECTOR('',#23773,1.); +#23773 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#23774 = ORIENTED_EDGE('',*,*,#23775,.T.); +#23775 = EDGE_CURVE('',#23768,#23776,#23778,.T.); +#23776 = VERTEX_POINT('',#23777); +#23777 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#23778 = CIRCLE('',#23779,0.25); +#23779 = AXIS2_PLACEMENT_3D('',#23780,#23781,#23782); +#23780 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#23781 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34)); +#23782 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#23783 = ORIENTED_EDGE('',*,*,#23784,.T.); +#23784 = EDGE_CURVE('',#23776,#23785,#23787,.T.); +#23785 = VERTEX_POINT('',#23786); +#23786 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#23787 = LINE('',#23788,#23789); +#23788 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#23789 = VECTOR('',#23790,1.); +#23790 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#23791 = ORIENTED_EDGE('',*,*,#23792,.T.); +#23792 = EDGE_CURVE('',#23785,#23793,#23795,.T.); +#23793 = VERTEX_POINT('',#23794); +#23794 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#23795 = LINE('',#23796,#23797); +#23796 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#23797 = VECTOR('',#23798,1.); +#23798 = DIRECTION('',(0.,0.,1.)); +#23799 = ORIENTED_EDGE('',*,*,#23800,.T.); +#23800 = EDGE_CURVE('',#23793,#23801,#23803,.T.); +#23801 = VERTEX_POINT('',#23802); +#23802 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#23803 = LINE('',#23804,#23805); +#23804 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#23805 = VECTOR('',#23806,1.); +#23806 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#23807 = ORIENTED_EDGE('',*,*,#23808,.T.); +#23808 = EDGE_CURVE('',#23801,#23809,#23811,.T.); +#23809 = VERTEX_POINT('',#23810); +#23810 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#23811 = CIRCLE('',#23812,0.1); +#23812 = AXIS2_PLACEMENT_3D('',#23813,#23814,#23815); +#23813 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#23814 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47)); +#23815 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#23816 = ORIENTED_EDGE('',*,*,#23817,.T.); +#23817 = EDGE_CURVE('',#23809,#23818,#23820,.T.); +#23818 = VERTEX_POINT('',#23819); +#23819 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#23820 = LINE('',#23821,#23822); +#23821 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#23822 = VECTOR('',#23823,1.); +#23823 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#23824 = ORIENTED_EDGE('',*,*,#23825,.T.); +#23825 = EDGE_CURVE('',#23818,#23230,#23826,.T.); +#23826 = CIRCLE('',#23827,0.25); +#23827 = AXIS2_PLACEMENT_3D('',#23828,#23829,#23830); +#23828 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#23829 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#23830 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#23831 = PLANE('',#23832); +#23832 = AXIS2_PLACEMENT_3D('',#23833,#23834,#23835); +#23833 = CARTESIAN_POINT('',(-0.931323080229,-1.15,0.33452717391)); +#23834 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#23835 = DIRECTION('',(0.,-0.,1.)); +#23836 = ADVANCED_FACE('',(#23837),#23855,.F.); +#23837 = FACE_BOUND('',#23838,.F.); +#23838 = EDGE_LOOP('',(#23839,#23840,#23848,#23854)); +#23839 = ORIENTED_EDGE('',*,*,#23261,.T.); +#23840 = ORIENTED_EDGE('',*,*,#23841,.T.); +#23841 = EDGE_CURVE('',#23253,#23842,#23844,.T.); +#23842 = VERTEX_POINT('',#23843); +#23843 = CARTESIAN_POINT('',(-0.843471632406,-0.75,0.206587955583)); +#23844 = LINE('',#23845,#23846); +#23845 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#23846 = VECTOR('',#23847,1.); +#23847 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#23848 = ORIENTED_EDGE('',*,*,#23849,.F.); +#23849 = EDGE_CURVE('',#23768,#23842,#23850,.T.); +#23850 = LINE('',#23851,#23852); +#23851 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#23852 = VECTOR('',#23853,1.); +#23853 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#23854 = ORIENTED_EDGE('',*,*,#23767,.F.); +#23855 = PLANE('',#23856); +#23856 = AXIS2_PLACEMENT_3D('',#23857,#23858,#23859); +#23857 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#23858 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909 + )); +#23859 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#23860 = ADVANCED_FACE('',(#23861),#23923,.T.); +#23861 = FACE_BOUND('',#23862,.T.); +#23862 = EDGE_LOOP('',(#23863,#23864,#23865,#23866,#23875,#23883,#23891, + #23899,#23908,#23916)); +#23863 = ORIENTED_EDGE('',*,*,#23284,.F.); +#23864 = ORIENTED_EDGE('',*,*,#23252,.T.); +#23865 = ORIENTED_EDGE('',*,*,#23841,.T.); +#23866 = ORIENTED_EDGE('',*,*,#23867,.T.); +#23867 = EDGE_CURVE('',#23842,#23868,#23870,.T.); +#23868 = VERTEX_POINT('',#23869); +#23869 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17)); +#23870 = CIRCLE('',#23871,0.25); +#23871 = AXIS2_PLACEMENT_3D('',#23872,#23873,#23874); +#23872 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#23873 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34)); +#23874 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#23875 = ORIENTED_EDGE('',*,*,#23876,.T.); +#23876 = EDGE_CURVE('',#23868,#23877,#23879,.T.); +#23877 = VERTEX_POINT('',#23878); +#23878 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#23879 = LINE('',#23880,#23881); +#23880 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17)); +#23881 = VECTOR('',#23882,1.); +#23882 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#23883 = ORIENTED_EDGE('',*,*,#23884,.T.); +#23884 = EDGE_CURVE('',#23877,#23885,#23887,.T.); +#23885 = VERTEX_POINT('',#23886); +#23886 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#23887 = LINE('',#23888,#23889); +#23888 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#23889 = VECTOR('',#23890,1.); +#23890 = DIRECTION('',(0.,0.,1.)); +#23891 = ORIENTED_EDGE('',*,*,#23892,.T.); +#23892 = EDGE_CURVE('',#23885,#23893,#23895,.T.); +#23893 = VERTEX_POINT('',#23894); +#23894 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.15)); +#23895 = LINE('',#23896,#23897); +#23896 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#23897 = VECTOR('',#23898,1.); +#23898 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#23899 = ORIENTED_EDGE('',*,*,#23900,.T.); +#23900 = EDGE_CURVE('',#23893,#23901,#23903,.T.); +#23901 = VERTEX_POINT('',#23902); +#23902 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#23903 = CIRCLE('',#23904,0.1); +#23904 = AXIS2_PLACEMENT_3D('',#23905,#23906,#23907); +#23905 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#23906 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47)); +#23907 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#23908 = ORIENTED_EDGE('',*,*,#23909,.T.); +#23909 = EDGE_CURVE('',#23901,#23910,#23912,.T.); +#23910 = VERTEX_POINT('',#23911); +#23911 = CARTESIAN_POINT('',(-0.946201938253,-0.75,0.518412044417)); +#23912 = LINE('',#23913,#23914); +#23913 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#23914 = VECTOR('',#23915,1.); +#23915 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#23916 = ORIENTED_EDGE('',*,*,#23917,.T.); +#23917 = EDGE_CURVE('',#23910,#23285,#23918,.T.); +#23918 = CIRCLE('',#23919,0.25); +#23919 = AXIS2_PLACEMENT_3D('',#23920,#23921,#23922); +#23920 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#23921 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#23922 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#23923 = PLANE('',#23924); +#23924 = AXIS2_PLACEMENT_3D('',#23925,#23926,#23927); +#23925 = CARTESIAN_POINT('',(-0.931323080229,-0.75,0.33452717391)); +#23926 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#23927 = DIRECTION('',(0.,-0.,1.)); +#23928 = ADVANCED_FACE('',(#23929),#23940,.F.); +#23929 = FACE_BOUND('',#23930,.F.); +#23930 = EDGE_LOOP('',(#23931,#23932,#23933,#23934)); +#23931 = ORIENTED_EDGE('',*,*,#23301,.T.); +#23932 = ORIENTED_EDGE('',*,*,#23508,.T.); +#23933 = ORIENTED_EDGE('',*,*,#23555,.F.); +#23934 = ORIENTED_EDGE('',*,*,#23935,.F.); +#23935 = EDGE_CURVE('',#23285,#23548,#23936,.T.); +#23936 = LINE('',#23937,#23938); +#23937 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#23938 = VECTOR('',#23939,1.); +#23939 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#23940 = PLANE('',#23941); +#23941 = AXIS2_PLACEMENT_3D('',#23942,#23943,#23944); +#23942 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#23943 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#23944 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#23945 = ADVANCED_FACE('',(#23946),#24015,.F.); +#23946 = FACE_BOUND('',#23947,.F.); +#23947 = EDGE_LOOP('',(#23948,#23949,#23950,#23958,#23967,#23975,#23983, + #23991,#24000,#24008)); +#23948 = ORIENTED_EDGE('',*,*,#23293,.F.); +#23949 = ORIENTED_EDGE('',*,*,#23333,.T.); +#23950 = ORIENTED_EDGE('',*,*,#23951,.T.); +#23951 = EDGE_CURVE('',#23326,#23952,#23954,.T.); +#23952 = VERTEX_POINT('',#23953); +#23953 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#23954 = LINE('',#23955,#23956); +#23955 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#23956 = VECTOR('',#23957,1.); +#23957 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#23958 = ORIENTED_EDGE('',*,*,#23959,.T.); +#23959 = EDGE_CURVE('',#23952,#23960,#23962,.T.); +#23960 = VERTEX_POINT('',#23961); +#23961 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#23962 = CIRCLE('',#23963,0.25); +#23963 = AXIS2_PLACEMENT_3D('',#23964,#23965,#23966); +#23964 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#23965 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34)); +#23966 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#23967 = ORIENTED_EDGE('',*,*,#23968,.T.); +#23968 = EDGE_CURVE('',#23960,#23969,#23971,.T.); +#23969 = VERTEX_POINT('',#23970); +#23970 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#23971 = LINE('',#23972,#23973); +#23972 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#23973 = VECTOR('',#23974,1.); +#23974 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#23975 = ORIENTED_EDGE('',*,*,#23976,.T.); +#23976 = EDGE_CURVE('',#23969,#23977,#23979,.T.); +#23977 = VERTEX_POINT('',#23978); +#23978 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#23979 = LINE('',#23980,#23981); +#23980 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#23981 = VECTOR('',#23982,1.); +#23982 = DIRECTION('',(0.,0.,1.)); +#23983 = ORIENTED_EDGE('',*,*,#23984,.T.); +#23984 = EDGE_CURVE('',#23977,#23985,#23987,.T.); +#23985 = VERTEX_POINT('',#23986); +#23986 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#23987 = LINE('',#23988,#23989); +#23988 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#23989 = VECTOR('',#23990,1.); +#23990 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#23991 = ORIENTED_EDGE('',*,*,#23992,.T.); +#23992 = EDGE_CURVE('',#23985,#23993,#23995,.T.); +#23993 = VERTEX_POINT('',#23994); +#23994 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#23995 = CIRCLE('',#23996,0.1); +#23996 = AXIS2_PLACEMENT_3D('',#23997,#23998,#23999); +#23997 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#23998 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47)); +#23999 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#24000 = ORIENTED_EDGE('',*,*,#24001,.T.); +#24001 = EDGE_CURVE('',#23993,#24002,#24004,.T.); +#24002 = VERTEX_POINT('',#24003); +#24003 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#24004 = LINE('',#24005,#24006); +#24005 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#24006 = VECTOR('',#24007,1.); +#24007 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#24008 = ORIENTED_EDGE('',*,*,#24009,.T.); +#24009 = EDGE_CURVE('',#24002,#23294,#24010,.T.); +#24010 = CIRCLE('',#24011,0.25); +#24011 = AXIS2_PLACEMENT_3D('',#24012,#24013,#24014); +#24012 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#24013 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24014 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#24015 = PLANE('',#24016); +#24016 = AXIS2_PLACEMENT_3D('',#24017,#24018,#24019); +#24017 = CARTESIAN_POINT('',(-0.931323080229,0.75,0.33452717391)); +#24018 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24019 = DIRECTION('',(0.,-0.,1.)); +#24020 = ADVANCED_FACE('',(#24021),#24039,.F.); +#24021 = FACE_BOUND('',#24022,.F.); +#24022 = EDGE_LOOP('',(#24023,#24024,#24032,#24038)); +#24023 = ORIENTED_EDGE('',*,*,#23325,.T.); +#24024 = ORIENTED_EDGE('',*,*,#24025,.T.); +#24025 = EDGE_CURVE('',#23317,#24026,#24028,.T.); +#24026 = VERTEX_POINT('',#24027); +#24027 = CARTESIAN_POINT('',(-0.843471632406,1.15,0.206587955583)); +#24028 = LINE('',#24029,#24030); +#24029 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#24030 = VECTOR('',#24031,1.); +#24031 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#24032 = ORIENTED_EDGE('',*,*,#24033,.F.); +#24033 = EDGE_CURVE('',#23952,#24026,#24034,.T.); +#24034 = LINE('',#24035,#24036); +#24035 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#24036 = VECTOR('',#24037,1.); +#24037 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24038 = ORIENTED_EDGE('',*,*,#23951,.F.); +#24039 = PLANE('',#24040); +#24040 = AXIS2_PLACEMENT_3D('',#24041,#24042,#24043); +#24041 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#24042 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909 + )); +#24043 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#24044 = ADVANCED_FACE('',(#24045),#24107,.T.); +#24045 = FACE_BOUND('',#24046,.T.); +#24046 = EDGE_LOOP('',(#24047,#24048,#24049,#24050,#24059,#24067,#24075, + #24083,#24092,#24100)); +#24047 = ORIENTED_EDGE('',*,*,#23348,.F.); +#24048 = ORIENTED_EDGE('',*,*,#23316,.T.); +#24049 = ORIENTED_EDGE('',*,*,#24025,.T.); +#24050 = ORIENTED_EDGE('',*,*,#24051,.T.); +#24051 = EDGE_CURVE('',#24026,#24052,#24054,.T.); +#24052 = VERTEX_POINT('',#24053); +#24053 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#24054 = CIRCLE('',#24055,0.25); +#24055 = AXIS2_PLACEMENT_3D('',#24056,#24057,#24058); +#24056 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#24057 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34)); +#24058 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#24059 = ORIENTED_EDGE('',*,*,#24060,.T.); +#24060 = EDGE_CURVE('',#24052,#24061,#24063,.T.); +#24061 = VERTEX_POINT('',#24062); +#24062 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#24063 = LINE('',#24064,#24065); +#24064 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#24065 = VECTOR('',#24066,1.); +#24066 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#24067 = ORIENTED_EDGE('',*,*,#24068,.T.); +#24068 = EDGE_CURVE('',#24061,#24069,#24071,.T.); +#24069 = VERTEX_POINT('',#24070); +#24070 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#24071 = LINE('',#24072,#24073); +#24072 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#24073 = VECTOR('',#24074,1.); +#24074 = DIRECTION('',(0.,0.,1.)); +#24075 = ORIENTED_EDGE('',*,*,#24076,.T.); +#24076 = EDGE_CURVE('',#24069,#24077,#24079,.T.); +#24077 = VERTEX_POINT('',#24078); +#24078 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.15)); +#24079 = LINE('',#24080,#24081); +#24080 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#24081 = VECTOR('',#24082,1.); +#24082 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#24083 = ORIENTED_EDGE('',*,*,#24084,.T.); +#24084 = EDGE_CURVE('',#24077,#24085,#24087,.T.); +#24085 = VERTEX_POINT('',#24086); +#24086 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#24087 = CIRCLE('',#24088,0.1); +#24088 = AXIS2_PLACEMENT_3D('',#24089,#24090,#24091); +#24089 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#24090 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47)); +#24091 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#24092 = ORIENTED_EDGE('',*,*,#24093,.T.); +#24093 = EDGE_CURVE('',#24085,#24094,#24096,.T.); +#24094 = VERTEX_POINT('',#24095); +#24095 = CARTESIAN_POINT('',(-0.946201938253,1.15,0.518412044417)); +#24096 = LINE('',#24097,#24098); +#24097 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#24098 = VECTOR('',#24099,1.); +#24099 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#24100 = ORIENTED_EDGE('',*,*,#24101,.T.); +#24101 = EDGE_CURVE('',#24094,#23184,#24102,.T.); +#24102 = CIRCLE('',#24103,0.25); +#24103 = AXIS2_PLACEMENT_3D('',#24104,#24105,#24106); +#24104 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#24105 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24106 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#24107 = PLANE('',#24108); +#24108 = AXIS2_PLACEMENT_3D('',#24109,#24110,#24111); +#24109 = CARTESIAN_POINT('',(-0.931323080229,1.15,0.33452717391)); +#24110 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24111 = DIRECTION('',(0.,-0.,1.)); +#24112 = ADVANCED_FACE('',(#24113),#24182,.F.); +#24113 = FACE_BOUND('',#24114,.F.); +#24114 = EDGE_LOOP('',(#24115,#24116,#24117,#24125,#24134,#24142,#24150, + #24158,#24167,#24175)); +#24115 = ORIENTED_EDGE('',*,*,#23367,.F.); +#24116 = ORIENTED_EDGE('',*,*,#23400,.T.); +#24117 = ORIENTED_EDGE('',*,*,#24118,.T.); +#24118 = EDGE_CURVE('',#23393,#24119,#24121,.T.); +#24119 = VERTEX_POINT('',#24120); +#24120 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#24121 = LINE('',#24122,#24123); +#24122 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#24123 = VECTOR('',#24124,1.); +#24124 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#24125 = ORIENTED_EDGE('',*,*,#24126,.T.); +#24126 = EDGE_CURVE('',#24119,#24127,#24129,.T.); +#24127 = VERTEX_POINT('',#24128); +#24128 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#24129 = CIRCLE('',#24130,0.25); +#24130 = AXIS2_PLACEMENT_3D('',#24131,#24132,#24133); +#24131 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#24132 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24133 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#24134 = ORIENTED_EDGE('',*,*,#24135,.T.); +#24135 = EDGE_CURVE('',#24127,#24136,#24138,.T.); +#24136 = VERTEX_POINT('',#24137); +#24137 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#24138 = LINE('',#24139,#24140); +#24139 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#24140 = VECTOR('',#24141,1.); +#24141 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#24142 = ORIENTED_EDGE('',*,*,#24143,.T.); +#24143 = EDGE_CURVE('',#24136,#24144,#24146,.T.); +#24144 = VERTEX_POINT('',#24145); +#24145 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#24146 = LINE('',#24147,#24148); +#24147 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#24148 = VECTOR('',#24149,1.); +#24149 = DIRECTION('',(0.,0.,1.)); +#24150 = ORIENTED_EDGE('',*,*,#24151,.T.); +#24151 = EDGE_CURVE('',#24144,#24152,#24154,.T.); +#24152 = VERTEX_POINT('',#24153); +#24153 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#24154 = LINE('',#24155,#24156); +#24155 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#24156 = VECTOR('',#24157,1.); +#24157 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#24158 = ORIENTED_EDGE('',*,*,#24159,.T.); +#24159 = EDGE_CURVE('',#24152,#24160,#24162,.T.); +#24160 = VERTEX_POINT('',#24161); +#24161 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#24162 = CIRCLE('',#24163,0.1); +#24163 = AXIS2_PLACEMENT_3D('',#24164,#24165,#24166); +#24164 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#24165 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24166 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#24167 = ORIENTED_EDGE('',*,*,#24168,.T.); +#24168 = EDGE_CURVE('',#24160,#24169,#24171,.T.); +#24169 = VERTEX_POINT('',#24170); +#24170 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#24171 = LINE('',#24172,#24173); +#24172 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#24173 = VECTOR('',#24174,1.); +#24174 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#24175 = ORIENTED_EDGE('',*,*,#24176,.T.); +#24176 = EDGE_CURVE('',#24169,#23128,#24177,.T.); +#24177 = CIRCLE('',#24178,0.25); +#24178 = AXIS2_PLACEMENT_3D('',#24179,#24180,#24181); +#24179 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#24180 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24181 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#24182 = PLANE('',#24183); +#24183 = AXIS2_PLACEMENT_3D('',#24184,#24185,#24186); +#24184 = CARTESIAN_POINT('',(0.931323080229,0.2,0.33452717391)); +#24185 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24186 = DIRECTION('',(0.,0.,1.)); +#24187 = ADVANCED_FACE('',(#24188),#24206,.F.); +#24188 = FACE_BOUND('',#24189,.F.); +#24189 = EDGE_LOOP('',(#24190,#24191,#24199,#24205)); +#24190 = ORIENTED_EDGE('',*,*,#23392,.T.); +#24191 = ORIENTED_EDGE('',*,*,#24192,.T.); +#24192 = EDGE_CURVE('',#23384,#24193,#24195,.T.); +#24193 = VERTEX_POINT('',#24194); +#24194 = CARTESIAN_POINT('',(0.843471632406,-0.2,0.206587955583)); +#24195 = LINE('',#24196,#24197); +#24196 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#24197 = VECTOR('',#24198,1.); +#24198 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#24199 = ORIENTED_EDGE('',*,*,#24200,.F.); +#24200 = EDGE_CURVE('',#24119,#24193,#24201,.T.); +#24201 = LINE('',#24202,#24203); +#24202 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#24203 = VECTOR('',#24204,1.); +#24204 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24205 = ORIENTED_EDGE('',*,*,#24118,.F.); +#24206 = PLANE('',#24207); +#24207 = AXIS2_PLACEMENT_3D('',#24208,#24209,#24210); +#24208 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#24209 = DIRECTION('',(0.987833053268,1.096715000224E-16,0.155518033909) + ); +#24210 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#24211 = ADVANCED_FACE('',(#24212),#24274,.T.); +#24212 = FACE_BOUND('',#24213,.T.); +#24213 = EDGE_LOOP('',(#24214,#24215,#24216,#24217,#24226,#24234,#24242, + #24250,#24259,#24267)); +#24214 = ORIENTED_EDGE('',*,*,#23415,.F.); +#24215 = ORIENTED_EDGE('',*,*,#23383,.T.); +#24216 = ORIENTED_EDGE('',*,*,#24192,.T.); +#24217 = ORIENTED_EDGE('',*,*,#24218,.T.); +#24218 = EDGE_CURVE('',#24193,#24219,#24221,.T.); +#24219 = VERTEX_POINT('',#24220); +#24220 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#24221 = CIRCLE('',#24222,0.25); +#24222 = AXIS2_PLACEMENT_3D('',#24223,#24224,#24225); +#24223 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#24224 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24225 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#24226 = ORIENTED_EDGE('',*,*,#24227,.T.); +#24227 = EDGE_CURVE('',#24219,#24228,#24230,.T.); +#24228 = VERTEX_POINT('',#24229); +#24229 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#24230 = LINE('',#24231,#24232); +#24231 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#24232 = VECTOR('',#24233,1.); +#24233 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#24234 = ORIENTED_EDGE('',*,*,#24235,.T.); +#24235 = EDGE_CURVE('',#24228,#24236,#24238,.T.); +#24236 = VERTEX_POINT('',#24237); +#24237 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#24238 = LINE('',#24239,#24240); +#24239 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#24240 = VECTOR('',#24241,1.); +#24241 = DIRECTION('',(0.,0.,1.)); +#24242 = ORIENTED_EDGE('',*,*,#24243,.T.); +#24243 = EDGE_CURVE('',#24236,#24244,#24246,.T.); +#24244 = VERTEX_POINT('',#24245); +#24245 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.15)); +#24246 = LINE('',#24247,#24248); +#24247 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#24248 = VECTOR('',#24249,1.); +#24249 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#24250 = ORIENTED_EDGE('',*,*,#24251,.T.); +#24251 = EDGE_CURVE('',#24244,#24252,#24254,.T.); +#24252 = VERTEX_POINT('',#24253); +#24253 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#24254 = CIRCLE('',#24255,0.1); +#24255 = AXIS2_PLACEMENT_3D('',#24256,#24257,#24258); +#24256 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#24257 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24258 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#24259 = ORIENTED_EDGE('',*,*,#24260,.T.); +#24260 = EDGE_CURVE('',#24252,#24261,#24263,.T.); +#24261 = VERTEX_POINT('',#24262); +#24262 = CARTESIAN_POINT('',(0.946201938253,-0.2,0.518412044417)); +#24263 = LINE('',#24264,#24265); +#24264 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#24265 = VECTOR('',#24266,1.); +#24266 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#24267 = ORIENTED_EDGE('',*,*,#24268,.T.); +#24268 = EDGE_CURVE('',#24261,#23416,#24269,.T.); +#24269 = CIRCLE('',#24270,0.25); +#24270 = AXIS2_PLACEMENT_3D('',#24271,#24272,#24273); +#24271 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#24272 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24273 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#24274 = PLANE('',#24275); +#24275 = AXIS2_PLACEMENT_3D('',#24276,#24277,#24278); +#24276 = CARTESIAN_POINT('',(0.931323080229,-0.2,0.33452717391)); +#24277 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24278 = DIRECTION('',(0.,0.,1.)); +#24279 = ADVANCED_FACE('',(#24280),#24291,.T.); +#24280 = FACE_BOUND('',#24281,.T.); +#24281 = EDGE_LOOP('',(#24282,#24283,#24284,#24285)); +#24282 = ORIENTED_EDGE('',*,*,#24009,.T.); +#24283 = ORIENTED_EDGE('',*,*,#23516,.T.); +#24284 = ORIENTED_EDGE('',*,*,#24101,.F.); +#24285 = ORIENTED_EDGE('',*,*,#24286,.F.); +#24286 = EDGE_CURVE('',#24002,#24094,#24287,.T.); +#24287 = LINE('',#24288,#24289); +#24288 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#24289 = VECTOR('',#24290,1.); +#24290 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24291 = CYLINDRICAL_SURFACE('',#24292,0.25); +#24292 = AXIS2_PLACEMENT_3D('',#24293,#24294,#24295); +#24293 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#24294 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#24295 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#24296 = ADVANCED_FACE('',(#24297),#24308,.F.); +#24297 = FACE_BOUND('',#24298,.F.); +#24298 = EDGE_LOOP('',(#24299,#24300,#24306,#24307)); +#24299 = ORIENTED_EDGE('',*,*,#23727,.F.); +#24300 = ORIENTED_EDGE('',*,*,#24301,.T.); +#24301 = EDGE_CURVE('',#23230,#23285,#24302,.T.); +#24302 = LINE('',#24303,#24304); +#24303 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#24304 = VECTOR('',#24305,1.); +#24305 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24306 = ORIENTED_EDGE('',*,*,#23935,.T.); +#24307 = ORIENTED_EDGE('',*,*,#23547,.F.); +#24308 = PLANE('',#24309); +#24309 = AXIS2_PLACEMENT_3D('',#24310,#24311,#24312); +#24310 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#24311 = DIRECTION('',(0.,0.,-1.)); +#24312 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#24313 = ADVANCED_FACE('',(#24314,#24343),#24354,.T.); +#24314 = FACE_BOUND('',#24315,.T.); +#24315 = EDGE_LOOP('',(#24316,#24317,#24318,#24319,#24327,#24335,#24341, + #24342)); +#24316 = ORIENTED_EDGE('',*,*,#23622,.F.); +#24317 = ORIENTED_EDGE('',*,*,#23599,.F.); +#24318 = ORIENTED_EDGE('',*,*,#23570,.F.); +#24319 = ORIENTED_EDGE('',*,*,#24320,.F.); +#24320 = EDGE_CURVE('',#24321,#23571,#24323,.T.); +#24321 = VERTEX_POINT('',#24322); +#24322 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#24323 = LINE('',#24324,#24325); +#24324 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#24325 = VECTOR('',#24326,1.); +#24326 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#24327 = ORIENTED_EDGE('',*,*,#24328,.F.); +#24328 = EDGE_CURVE('',#24329,#24321,#24331,.T.); +#24329 = VERTEX_POINT('',#24330); +#24330 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#24331 = LINE('',#24332,#24333); +#24332 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#24333 = VECTOR('',#24334,1.); +#24334 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#24335 = ORIENTED_EDGE('',*,*,#24336,.F.); +#24336 = EDGE_CURVE('',#23678,#24329,#24337,.T.); +#24337 = LINE('',#24338,#24339); +#24338 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#24339 = VECTOR('',#24340,1.); +#24340 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#24341 = ORIENTED_EDGE('',*,*,#23684,.F.); +#24342 = ORIENTED_EDGE('',*,*,#23645,.F.); +#24343 = FACE_BOUND('',#24344,.T.); +#24344 = EDGE_LOOP('',(#24345)); +#24345 = ORIENTED_EDGE('',*,*,#24346,.T.); +#24346 = EDGE_CURVE('',#24347,#24347,#24349,.T.); +#24347 = VERTEX_POINT('',#24348); +#24348 = CARTESIAN_POINT('',(-0.428243103516,1.178243103516,1.2)); +#24349 = CIRCLE('',#24350,5.E-02); +#24350 = AXIS2_PLACEMENT_3D('',#24351,#24352,#24353); +#24351 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#24352 = DIRECTION('',(0.,-0.,-1.)); +#24353 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24354 = PLANE('',#24355); +#24355 = AXIS2_PLACEMENT_3D('',#24356,#24357,#24358); +#24356 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#24357 = DIRECTION('',(0.,0.,1.)); +#24358 = DIRECTION('',(0.369013679242,-0.929423963825,0.)); +#24359 = ADVANCED_FACE('',(#24360),#24370,.F.); +#24360 = FACE_BOUND('',#24361,.F.); +#24361 = EDGE_LOOP('',(#24362,#24363,#24364,#24365)); +#24362 = ORIENTED_EDGE('',*,*,#23734,.T.); +#24363 = ORIENTED_EDGE('',*,*,#23578,.T.); +#24364 = ORIENTED_EDGE('',*,*,#24320,.F.); +#24365 = ORIENTED_EDGE('',*,*,#24366,.F.); +#24366 = EDGE_CURVE('',#23735,#24321,#24367,.T.); +#24367 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24368,#24369),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24368 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#24369 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#24370 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24371,#24372) + ,(#24373,#24374 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24371 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#24372 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#24373 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#24374 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#24375 = ADVANCED_FACE('',(#24376),#24386,.F.); +#24376 = FACE_BOUND('',#24377,.F.); +#24377 = EDGE_LOOP('',(#24378,#24379,#24384,#24385)); +#24378 = ORIENTED_EDGE('',*,*,#23750,.T.); +#24379 = ORIENTED_EDGE('',*,*,#24380,.T.); +#24380 = EDGE_CURVE('',#23743,#24329,#24381,.T.); +#24381 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24382,#24383),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24382 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#24383 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#24384 = ORIENTED_EDGE('',*,*,#24336,.F.); +#24385 = ORIENTED_EDGE('',*,*,#23677,.F.); +#24386 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24387,#24388) + ,(#24389,#24390 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24387 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#24388 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#24389 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#24390 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#24391 = ADVANCED_FACE('',(#24392),#24403,.T.); +#24392 = FACE_BOUND('',#24393,.T.); +#24393 = EDGE_LOOP('',(#24394,#24395,#24396,#24397)); +#24394 = ORIENTED_EDGE('',*,*,#24176,.T.); +#24395 = ORIENTED_EDGE('',*,*,#23700,.T.); +#24396 = ORIENTED_EDGE('',*,*,#24268,.F.); +#24397 = ORIENTED_EDGE('',*,*,#24398,.F.); +#24398 = EDGE_CURVE('',#24169,#24261,#24399,.T.); +#24399 = LINE('',#24400,#24401); +#24400 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#24401 = VECTOR('',#24402,1.); +#24402 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24403 = CYLINDRICAL_SURFACE('',#24404,0.25); +#24404 = AXIS2_PLACEMENT_3D('',#24405,#24406,#24407); +#24405 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#24406 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24407 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#24408 = ADVANCED_FACE('',(#24409),#24415,.F.); +#24409 = FACE_BOUND('',#24410,.F.); +#24410 = EDGE_LOOP('',(#24411,#24412,#24413,#24414)); +#24411 = ORIENTED_EDGE('',*,*,#23742,.T.); +#24412 = ORIENTED_EDGE('',*,*,#24366,.T.); +#24413 = ORIENTED_EDGE('',*,*,#24328,.F.); +#24414 = ORIENTED_EDGE('',*,*,#24380,.F.); +#24415 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24416,#24417) + ,(#24418,#24419 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24416 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#24417 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#24418 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#24419 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#24420 = ADVANCED_FACE('',(#24421),#24432,.T.); +#24421 = FACE_BOUND('',#24422,.T.); +#24422 = EDGE_LOOP('',(#24423,#24424,#24425,#24426)); +#24423 = ORIENTED_EDGE('',*,*,#23825,.T.); +#24424 = ORIENTED_EDGE('',*,*,#24301,.T.); +#24425 = ORIENTED_EDGE('',*,*,#23917,.F.); +#24426 = ORIENTED_EDGE('',*,*,#24427,.F.); +#24427 = EDGE_CURVE('',#23818,#23910,#24428,.T.); +#24428 = LINE('',#24429,#24430); +#24429 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#24430 = VECTOR('',#24431,1.); +#24431 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24432 = CYLINDRICAL_SURFACE('',#24433,0.25); +#24433 = AXIS2_PLACEMENT_3D('',#24434,#24435,#24436); +#24434 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#24435 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#24436 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#24437 = ADVANCED_FACE('',(#24438),#24449,.F.); +#24438 = FACE_BOUND('',#24439,.F.); +#24439 = EDGE_LOOP('',(#24440,#24446,#24447,#24448)); +#24440 = ORIENTED_EDGE('',*,*,#24441,.T.); +#24441 = EDGE_CURVE('',#23809,#23901,#24442,.T.); +#24442 = LINE('',#24443,#24444); +#24443 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#24444 = VECTOR('',#24445,1.); +#24445 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24446 = ORIENTED_EDGE('',*,*,#23909,.T.); +#24447 = ORIENTED_EDGE('',*,*,#24427,.F.); +#24448 = ORIENTED_EDGE('',*,*,#23817,.F.); +#24449 = PLANE('',#24450); +#24450 = AXIS2_PLACEMENT_3D('',#24451,#24452,#24453); +#24451 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#24452 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#24453 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#24454 = ADVANCED_FACE('',(#24455),#24466,.F.); +#24455 = FACE_BOUND('',#24456,.F.); +#24456 = EDGE_LOOP('',(#24457,#24463,#24464,#24465)); +#24457 = ORIENTED_EDGE('',*,*,#24458,.T.); +#24458 = EDGE_CURVE('',#23801,#23893,#24459,.T.); +#24459 = LINE('',#24460,#24461); +#24460 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#24461 = VECTOR('',#24462,1.); +#24462 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24463 = ORIENTED_EDGE('',*,*,#23900,.T.); +#24464 = ORIENTED_EDGE('',*,*,#24441,.F.); +#24465 = ORIENTED_EDGE('',*,*,#23808,.F.); +#24466 = CYLINDRICAL_SURFACE('',#24467,0.1); +#24467 = AXIS2_PLACEMENT_3D('',#24468,#24469,#24470); +#24468 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#24469 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#24470 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#24471 = ADVANCED_FACE('',(#24472),#24483,.F.); +#24472 = FACE_BOUND('',#24473,.F.); +#24473 = EDGE_LOOP('',(#24474,#24480,#24481,#24482)); +#24474 = ORIENTED_EDGE('',*,*,#24475,.T.); +#24475 = EDGE_CURVE('',#23793,#23885,#24476,.T.); +#24476 = LINE('',#24477,#24478); +#24477 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#24478 = VECTOR('',#24479,1.); +#24479 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24480 = ORIENTED_EDGE('',*,*,#23892,.T.); +#24481 = ORIENTED_EDGE('',*,*,#24458,.F.); +#24482 = ORIENTED_EDGE('',*,*,#23800,.F.); +#24483 = PLANE('',#24484); +#24484 = AXIS2_PLACEMENT_3D('',#24485,#24486,#24487); +#24485 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#24486 = DIRECTION('',(0.,0.,-1.)); +#24487 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#24488 = ADVANCED_FACE('',(#24489),#24500,.F.); +#24489 = FACE_BOUND('',#24490,.F.); +#24490 = EDGE_LOOP('',(#24491,#24497,#24498,#24499)); +#24491 = ORIENTED_EDGE('',*,*,#24492,.T.); +#24492 = EDGE_CURVE('',#23785,#23877,#24493,.T.); +#24493 = LINE('',#24494,#24495); +#24494 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#24495 = VECTOR('',#24496,1.); +#24496 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24497 = ORIENTED_EDGE('',*,*,#23884,.T.); +#24498 = ORIENTED_EDGE('',*,*,#24475,.F.); +#24499 = ORIENTED_EDGE('',*,*,#23792,.F.); +#24500 = PLANE('',#24501); +#24501 = AXIS2_PLACEMENT_3D('',#24502,#24503,#24504); +#24502 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#24503 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#24504 = DIRECTION('',(0.,0.,1.)); +#24505 = ADVANCED_FACE('',(#24506),#24517,.F.); +#24506 = FACE_BOUND('',#24507,.F.); +#24507 = EDGE_LOOP('',(#24508,#24514,#24515,#24516)); +#24508 = ORIENTED_EDGE('',*,*,#24509,.T.); +#24509 = EDGE_CURVE('',#23776,#23868,#24510,.T.); +#24510 = LINE('',#24511,#24512); +#24511 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#24512 = VECTOR('',#24513,1.); +#24513 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24514 = ORIENTED_EDGE('',*,*,#23876,.T.); +#24515 = ORIENTED_EDGE('',*,*,#24492,.F.); +#24516 = ORIENTED_EDGE('',*,*,#23784,.F.); +#24517 = PLANE('',#24518); +#24518 = AXIS2_PLACEMENT_3D('',#24519,#24520,#24521); +#24519 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#24520 = DIRECTION('',(0.,0.,1.)); +#24521 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#24522 = ADVANCED_FACE('',(#24523),#24529,.T.); +#24523 = FACE_BOUND('',#24524,.T.); +#24524 = EDGE_LOOP('',(#24525,#24526,#24527,#24528)); +#24525 = ORIENTED_EDGE('',*,*,#23775,.T.); +#24526 = ORIENTED_EDGE('',*,*,#24509,.T.); +#24527 = ORIENTED_EDGE('',*,*,#23867,.F.); +#24528 = ORIENTED_EDGE('',*,*,#23849,.F.); +#24529 = CYLINDRICAL_SURFACE('',#24530,0.25); +#24530 = AXIS2_PLACEMENT_3D('',#24531,#24532,#24533); +#24531 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#24532 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#24533 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#24534 = ADVANCED_FACE('',(#24535),#24546,.F.); +#24535 = FACE_BOUND('',#24536,.F.); +#24536 = EDGE_LOOP('',(#24537,#24543,#24544,#24545)); +#24537 = ORIENTED_EDGE('',*,*,#24538,.T.); +#24538 = EDGE_CURVE('',#23993,#24085,#24539,.T.); +#24539 = LINE('',#24540,#24541); +#24540 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#24541 = VECTOR('',#24542,1.); +#24542 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24543 = ORIENTED_EDGE('',*,*,#24093,.T.); +#24544 = ORIENTED_EDGE('',*,*,#24286,.F.); +#24545 = ORIENTED_EDGE('',*,*,#24001,.F.); +#24546 = PLANE('',#24547); +#24547 = AXIS2_PLACEMENT_3D('',#24548,#24549,#24550); +#24548 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#24549 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#24550 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#24551 = ADVANCED_FACE('',(#24552),#24563,.F.); +#24552 = FACE_BOUND('',#24553,.F.); +#24553 = EDGE_LOOP('',(#24554,#24560,#24561,#24562)); +#24554 = ORIENTED_EDGE('',*,*,#24555,.T.); +#24555 = EDGE_CURVE('',#23985,#24077,#24556,.T.); +#24556 = LINE('',#24557,#24558); +#24557 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#24558 = VECTOR('',#24559,1.); +#24559 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24560 = ORIENTED_EDGE('',*,*,#24084,.T.); +#24561 = ORIENTED_EDGE('',*,*,#24538,.F.); +#24562 = ORIENTED_EDGE('',*,*,#23992,.F.); +#24563 = CYLINDRICAL_SURFACE('',#24564,0.1); +#24564 = AXIS2_PLACEMENT_3D('',#24565,#24566,#24567); +#24565 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#24566 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#24567 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#24568 = ADVANCED_FACE('',(#24569),#24580,.F.); +#24569 = FACE_BOUND('',#24570,.F.); +#24570 = EDGE_LOOP('',(#24571,#24577,#24578,#24579)); +#24571 = ORIENTED_EDGE('',*,*,#24572,.T.); +#24572 = EDGE_CURVE('',#23977,#24069,#24573,.T.); +#24573 = LINE('',#24574,#24575); +#24574 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#24575 = VECTOR('',#24576,1.); +#24576 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24577 = ORIENTED_EDGE('',*,*,#24076,.T.); +#24578 = ORIENTED_EDGE('',*,*,#24555,.F.); +#24579 = ORIENTED_EDGE('',*,*,#23984,.F.); +#24580 = PLANE('',#24581); +#24581 = AXIS2_PLACEMENT_3D('',#24582,#24583,#24584); +#24582 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#24583 = DIRECTION('',(0.,0.,-1.)); +#24584 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#24585 = ADVANCED_FACE('',(#24586),#24597,.F.); +#24586 = FACE_BOUND('',#24587,.F.); +#24587 = EDGE_LOOP('',(#24588,#24594,#24595,#24596)); +#24588 = ORIENTED_EDGE('',*,*,#24589,.T.); +#24589 = EDGE_CURVE('',#23969,#24061,#24590,.T.); +#24590 = LINE('',#24591,#24592); +#24591 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#24592 = VECTOR('',#24593,1.); +#24593 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24594 = ORIENTED_EDGE('',*,*,#24068,.T.); +#24595 = ORIENTED_EDGE('',*,*,#24572,.F.); +#24596 = ORIENTED_EDGE('',*,*,#23976,.F.); +#24597 = PLANE('',#24598); +#24598 = AXIS2_PLACEMENT_3D('',#24599,#24600,#24601); +#24599 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#24600 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#24601 = DIRECTION('',(0.,0.,1.)); +#24602 = ADVANCED_FACE('',(#24603),#24614,.F.); +#24603 = FACE_BOUND('',#24604,.F.); +#24604 = EDGE_LOOP('',(#24605,#24611,#24612,#24613)); +#24605 = ORIENTED_EDGE('',*,*,#24606,.T.); +#24606 = EDGE_CURVE('',#23960,#24052,#24607,.T.); +#24607 = LINE('',#24608,#24609); +#24608 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#24609 = VECTOR('',#24610,1.); +#24610 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24611 = ORIENTED_EDGE('',*,*,#24060,.T.); +#24612 = ORIENTED_EDGE('',*,*,#24589,.F.); +#24613 = ORIENTED_EDGE('',*,*,#23968,.F.); +#24614 = PLANE('',#24615); +#24615 = AXIS2_PLACEMENT_3D('',#24616,#24617,#24618); +#24616 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#24617 = DIRECTION('',(0.,0.,1.)); +#24618 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#24619 = ADVANCED_FACE('',(#24620),#24626,.T.); +#24620 = FACE_BOUND('',#24621,.T.); +#24621 = EDGE_LOOP('',(#24622,#24623,#24624,#24625)); +#24622 = ORIENTED_EDGE('',*,*,#23959,.T.); +#24623 = ORIENTED_EDGE('',*,*,#24606,.T.); +#24624 = ORIENTED_EDGE('',*,*,#24051,.F.); +#24625 = ORIENTED_EDGE('',*,*,#24033,.F.); +#24626 = CYLINDRICAL_SURFACE('',#24627,0.25); +#24627 = AXIS2_PLACEMENT_3D('',#24628,#24629,#24630); +#24628 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#24629 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#24630 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#24631 = ADVANCED_FACE('',(#24632),#24643,.F.); +#24632 = FACE_BOUND('',#24633,.F.); +#24633 = EDGE_LOOP('',(#24634,#24640,#24641,#24642)); +#24634 = ORIENTED_EDGE('',*,*,#24635,.T.); +#24635 = EDGE_CURVE('',#24160,#24252,#24636,.T.); +#24636 = LINE('',#24637,#24638); +#24637 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#24638 = VECTOR('',#24639,1.); +#24639 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24640 = ORIENTED_EDGE('',*,*,#24260,.T.); +#24641 = ORIENTED_EDGE('',*,*,#24398,.F.); +#24642 = ORIENTED_EDGE('',*,*,#24168,.F.); +#24643 = PLANE('',#24644); +#24644 = AXIS2_PLACEMENT_3D('',#24645,#24646,#24647); +#24645 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#24646 = DIRECTION('',(-0.987833053268,-1.096715000224E-16, + -0.155518033909)); +#24647 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#24648 = ADVANCED_FACE('',(#24649),#24660,.F.); +#24649 = FACE_BOUND('',#24650,.F.); +#24650 = EDGE_LOOP('',(#24651,#24657,#24658,#24659)); +#24651 = ORIENTED_EDGE('',*,*,#24652,.T.); +#24652 = EDGE_CURVE('',#24152,#24244,#24653,.T.); +#24653 = LINE('',#24654,#24655); +#24654 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#24655 = VECTOR('',#24656,1.); +#24656 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24657 = ORIENTED_EDGE('',*,*,#24251,.T.); +#24658 = ORIENTED_EDGE('',*,*,#24635,.F.); +#24659 = ORIENTED_EDGE('',*,*,#24159,.F.); +#24660 = CYLINDRICAL_SURFACE('',#24661,0.1); +#24661 = AXIS2_PLACEMENT_3D('',#24662,#24663,#24664); +#24662 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#24663 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24664 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#24665 = ADVANCED_FACE('',(#24666),#24677,.F.); +#24666 = FACE_BOUND('',#24667,.F.); +#24667 = EDGE_LOOP('',(#24668,#24674,#24675,#24676)); +#24668 = ORIENTED_EDGE('',*,*,#24669,.T.); +#24669 = EDGE_CURVE('',#24144,#24236,#24670,.T.); +#24670 = LINE('',#24671,#24672); +#24671 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#24672 = VECTOR('',#24673,1.); +#24673 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24674 = ORIENTED_EDGE('',*,*,#24243,.T.); +#24675 = ORIENTED_EDGE('',*,*,#24652,.F.); +#24676 = ORIENTED_EDGE('',*,*,#24151,.F.); +#24677 = PLANE('',#24678); +#24678 = AXIS2_PLACEMENT_3D('',#24679,#24680,#24681); +#24679 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#24680 = DIRECTION('',(0.,0.,-1.)); +#24681 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#24682 = ADVANCED_FACE('',(#24683),#24694,.F.); +#24683 = FACE_BOUND('',#24684,.F.); +#24684 = EDGE_LOOP('',(#24685,#24691,#24692,#24693)); +#24685 = ORIENTED_EDGE('',*,*,#24686,.T.); +#24686 = EDGE_CURVE('',#24136,#24228,#24687,.T.); +#24687 = LINE('',#24688,#24689); +#24688 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#24689 = VECTOR('',#24690,1.); +#24690 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24691 = ORIENTED_EDGE('',*,*,#24235,.T.); +#24692 = ORIENTED_EDGE('',*,*,#24669,.F.); +#24693 = ORIENTED_EDGE('',*,*,#24143,.F.); +#24694 = PLANE('',#24695); +#24695 = AXIS2_PLACEMENT_3D('',#24696,#24697,#24698); +#24696 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#24697 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#24698 = DIRECTION('',(0.,0.,1.)); +#24699 = ADVANCED_FACE('',(#24700),#24711,.F.); +#24700 = FACE_BOUND('',#24701,.F.); +#24701 = EDGE_LOOP('',(#24702,#24708,#24709,#24710)); +#24702 = ORIENTED_EDGE('',*,*,#24703,.T.); +#24703 = EDGE_CURVE('',#24127,#24219,#24704,.T.); +#24704 = LINE('',#24705,#24706); +#24705 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#24706 = VECTOR('',#24707,1.); +#24707 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24708 = ORIENTED_EDGE('',*,*,#24227,.T.); +#24709 = ORIENTED_EDGE('',*,*,#24686,.F.); +#24710 = ORIENTED_EDGE('',*,*,#24135,.F.); +#24711 = PLANE('',#24712); +#24712 = AXIS2_PLACEMENT_3D('',#24713,#24714,#24715); +#24713 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#24714 = DIRECTION('',(0.,0.,1.)); +#24715 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#24716 = ADVANCED_FACE('',(#24717),#24723,.T.); +#24717 = FACE_BOUND('',#24718,.T.); +#24718 = EDGE_LOOP('',(#24719,#24720,#24721,#24722)); +#24719 = ORIENTED_EDGE('',*,*,#24126,.T.); +#24720 = ORIENTED_EDGE('',*,*,#24703,.T.); +#24721 = ORIENTED_EDGE('',*,*,#24218,.F.); +#24722 = ORIENTED_EDGE('',*,*,#24200,.F.); +#24723 = CYLINDRICAL_SURFACE('',#24724,0.25); +#24724 = AXIS2_PLACEMENT_3D('',#24725,#24726,#24727); +#24725 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#24726 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24727 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#24728 = ADVANCED_FACE('',(#24729),#24732,.F.); +#24729 = FACE_BOUND('',#24730,.T.); +#24730 = EDGE_LOOP('',(#24731)); +#24731 = ORIENTED_EDGE('',*,*,#24346,.F.); +#24732 = PLANE('',#24733); +#24733 = AXIS2_PLACEMENT_3D('',#24734,#24735,#24736); +#24734 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#24735 = DIRECTION('',(0.,0.,-1.)); +#24736 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#24741)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#24738,#24739,#24740)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#24738 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#24739 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#24740 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#24741 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#24738, + 'distance_accuracy_value','confusion accuracy'); +#24742 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#24743,#24745); +#24743 = ( REPRESENTATION_RELATIONSHIP('','',#22754,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#24744) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#24744 = ITEM_DEFINED_TRANSFORMATION('','',#11,#119); +#24745 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #24746); +#24746 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('27','Q1','',#5,#22749,$); +#24747 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#22751)); +#24748 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#24749,#24751); +#24749 = ( REPRESENTATION_RELATIONSHIP('','',#22754,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#24750) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#24750 = ITEM_DEFINED_TRANSFORMATION('','',#11,#123); +#24751 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #24752); +#24752 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('28','Q2','',#5,#22749,$); +#24753 = SHAPE_DEFINITION_REPRESENTATION(#24754,#24760); +#24754 = PRODUCT_DEFINITION_SHAPE('','',#24755); +#24755 = PRODUCT_DEFINITION('design','',#24756,#24759); +#24756 = PRODUCT_DEFINITION_FORMATION('','',#24757); +#24757 = PRODUCT('R_0603_1608Metric','R_0603_1608Metric','',(#24758)); +#24758 = PRODUCT_CONTEXT('',#2,'mechanical'); +#24759 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#24760 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#24761),#25551); +#24761 = MANIFOLD_SOLID_BREP('',#24762); +#24762 = CLOSED_SHELL('',(#24763,#24803,#24886,#24911,#24936,#25003, + #25020,#25037,#25086,#25103,#25120,#25169,#25186,#25255,#25286, + #25310,#25379,#25403,#25420,#25437,#25454,#25471,#25488,#25505, + #25522,#25539)); +#24763 = ADVANCED_FACE('',(#24764),#24798,.F.); +#24764 = FACE_BOUND('',#24765,.F.); +#24765 = EDGE_LOOP('',(#24766,#24776,#24784,#24792)); +#24766 = ORIENTED_EDGE('',*,*,#24767,.F.); +#24767 = EDGE_CURVE('',#24768,#24770,#24772,.T.); +#24768 = VERTEX_POINT('',#24769); +#24769 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02)); +#24770 = VERTEX_POINT('',#24771); +#24771 = CARTESIAN_POINT('',(-0.8,-0.4,0.405)); +#24772 = LINE('',#24773,#24774); +#24773 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#24774 = VECTOR('',#24775,1.); +#24775 = DIRECTION('',(0.,0.,1.)); +#24776 = ORIENTED_EDGE('',*,*,#24777,.T.); +#24777 = EDGE_CURVE('',#24768,#24778,#24780,.T.); +#24778 = VERTEX_POINT('',#24779); +#24779 = CARTESIAN_POINT('',(-0.8,0.4,4.5E-02)); +#24780 = LINE('',#24781,#24782); +#24781 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02)); +#24782 = VECTOR('',#24783,1.); +#24783 = DIRECTION('',(0.,1.,0.)); +#24784 = ORIENTED_EDGE('',*,*,#24785,.T.); +#24785 = EDGE_CURVE('',#24778,#24786,#24788,.T.); +#24786 = VERTEX_POINT('',#24787); +#24787 = CARTESIAN_POINT('',(-0.8,0.4,0.405)); +#24788 = LINE('',#24789,#24790); +#24789 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#24790 = VECTOR('',#24791,1.); +#24791 = DIRECTION('',(0.,0.,1.)); +#24792 = ORIENTED_EDGE('',*,*,#24793,.F.); +#24793 = EDGE_CURVE('',#24770,#24786,#24794,.T.); +#24794 = LINE('',#24795,#24796); +#24795 = CARTESIAN_POINT('',(-0.8,-0.4,0.405)); +#24796 = VECTOR('',#24797,1.); +#24797 = DIRECTION('',(0.,1.,0.)); +#24798 = PLANE('',#24799); +#24799 = AXIS2_PLACEMENT_3D('',#24800,#24801,#24802); +#24800 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#24801 = DIRECTION('',(1.,0.,0.)); +#24802 = DIRECTION('',(0.,0.,1.)); +#24803 = ADVANCED_FACE('',(#24804),#24881,.F.); +#24804 = FACE_BOUND('',#24805,.F.); +#24805 = EDGE_LOOP('',(#24806,#24816,#24823,#24824,#24833,#24841,#24850, + #24858,#24866,#24874)); +#24806 = ORIENTED_EDGE('',*,*,#24807,.F.); +#24807 = EDGE_CURVE('',#24808,#24810,#24812,.T.); +#24808 = VERTEX_POINT('',#24809); +#24809 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17)); +#24810 = VERTEX_POINT('',#24811); +#24811 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17)); +#24812 = LINE('',#24813,#24814); +#24813 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#24814 = VECTOR('',#24815,1.); +#24815 = DIRECTION('',(1.,0.,0.)); +#24816 = ORIENTED_EDGE('',*,*,#24817,.F.); +#24817 = EDGE_CURVE('',#24768,#24808,#24818,.T.); +#24818 = CIRCLE('',#24819,4.5E-02); +#24819 = AXIS2_PLACEMENT_3D('',#24820,#24821,#24822); +#24820 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#24821 = DIRECTION('',(0.,-1.,0.)); +#24822 = DIRECTION('',(0.,0.,1.)); +#24823 = ORIENTED_EDGE('',*,*,#24767,.T.); +#24824 = ORIENTED_EDGE('',*,*,#24825,.T.); +#24825 = EDGE_CURVE('',#24770,#24826,#24828,.T.); +#24826 = VERTEX_POINT('',#24827); +#24827 = CARTESIAN_POINT('',(-0.755,-0.4,0.45)); +#24828 = CIRCLE('',#24829,4.5E-02); +#24829 = AXIS2_PLACEMENT_3D('',#24830,#24831,#24832); +#24830 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#24831 = DIRECTION('',(0.,1.,0.)); +#24832 = DIRECTION('',(0.,-0.,1.)); +#24833 = ORIENTED_EDGE('',*,*,#24834,.T.); +#24834 = EDGE_CURVE('',#24826,#24835,#24837,.T.); +#24835 = VERTEX_POINT('',#24836); +#24836 = CARTESIAN_POINT('',(-0.545,-0.4,0.45)); +#24837 = LINE('',#24838,#24839); +#24838 = CARTESIAN_POINT('',(-0.8,-0.4,0.45)); +#24839 = VECTOR('',#24840,1.); +#24840 = DIRECTION('',(1.,0.,0.)); +#24841 = ORIENTED_EDGE('',*,*,#24842,.F.); +#24842 = EDGE_CURVE('',#24843,#24835,#24845,.T.); +#24843 = VERTEX_POINT('',#24844); +#24844 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#24845 = CIRCLE('',#24846,4.5E-02); +#24846 = AXIS2_PLACEMENT_3D('',#24847,#24848,#24849); +#24847 = CARTESIAN_POINT('',(-0.545,-0.4,0.405)); +#24848 = DIRECTION('',(0.,-1.,0.)); +#24849 = DIRECTION('',(0.,0.,1.)); +#24850 = ORIENTED_EDGE('',*,*,#24851,.F.); +#24851 = EDGE_CURVE('',#24852,#24843,#24854,.T.); +#24852 = VERTEX_POINT('',#24853); +#24853 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#24854 = LINE('',#24855,#24856); +#24855 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#24856 = VECTOR('',#24857,1.); +#24857 = DIRECTION('',(1.,0.,0.)); +#24858 = ORIENTED_EDGE('',*,*,#24859,.F.); +#24859 = EDGE_CURVE('',#24860,#24852,#24862,.T.); +#24860 = VERTEX_POINT('',#24861); +#24861 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#24862 = LINE('',#24863,#24864); +#24863 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#24864 = VECTOR('',#24865,1.); +#24865 = DIRECTION('',(0.,0.,1.)); +#24866 = ORIENTED_EDGE('',*,*,#24867,.T.); +#24867 = EDGE_CURVE('',#24860,#24868,#24870,.T.); +#24868 = VERTEX_POINT('',#24869); +#24869 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02)); +#24870 = LINE('',#24871,#24872); +#24871 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#24872 = VECTOR('',#24873,1.); +#24873 = DIRECTION('',(1.,0.,0.)); +#24874 = ORIENTED_EDGE('',*,*,#24875,.T.); +#24875 = EDGE_CURVE('',#24868,#24810,#24876,.T.); +#24876 = CIRCLE('',#24877,4.5E-02); +#24877 = AXIS2_PLACEMENT_3D('',#24878,#24879,#24880); +#24878 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02)); +#24879 = DIRECTION('',(0.,1.,0.)); +#24880 = DIRECTION('',(0.,-0.,1.)); +#24881 = PLANE('',#24882); +#24882 = AXIS2_PLACEMENT_3D('',#24883,#24884,#24885); +#24883 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#24884 = DIRECTION('',(0.,1.,0.)); +#24885 = DIRECTION('',(0.,-0.,1.)); +#24886 = ADVANCED_FACE('',(#24887),#24906,.T.); +#24887 = FACE_BOUND('',#24888,.T.); +#24888 = EDGE_LOOP('',(#24889,#24890,#24899,#24905)); +#24889 = ORIENTED_EDGE('',*,*,#24777,.T.); +#24890 = ORIENTED_EDGE('',*,*,#24891,.T.); +#24891 = EDGE_CURVE('',#24778,#24892,#24894,.T.); +#24892 = VERTEX_POINT('',#24893); +#24893 = CARTESIAN_POINT('',(-0.755,0.4,-2.775557561563E-17)); +#24894 = CIRCLE('',#24895,4.5E-02); +#24895 = AXIS2_PLACEMENT_3D('',#24896,#24897,#24898); +#24896 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#24897 = DIRECTION('',(0.,-1.,0.)); +#24898 = DIRECTION('',(0.,0.,1.)); +#24899 = ORIENTED_EDGE('',*,*,#24900,.F.); +#24900 = EDGE_CURVE('',#24808,#24892,#24901,.T.); +#24901 = LINE('',#24902,#24903); +#24902 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17)); +#24903 = VECTOR('',#24904,1.); +#24904 = DIRECTION('',(0.,1.,0.)); +#24905 = ORIENTED_EDGE('',*,*,#24817,.F.); +#24906 = CYLINDRICAL_SURFACE('',#24907,4.5E-02); +#24907 = AXIS2_PLACEMENT_3D('',#24908,#24909,#24910); +#24908 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#24909 = DIRECTION('',(0.,1.,0.)); +#24910 = DIRECTION('',(-1.,0.,0.)); +#24911 = ADVANCED_FACE('',(#24912),#24931,.T.); +#24912 = FACE_BOUND('',#24913,.T.); +#24913 = EDGE_LOOP('',(#24914,#24915,#24923,#24930)); +#24914 = ORIENTED_EDGE('',*,*,#24825,.T.); +#24915 = ORIENTED_EDGE('',*,*,#24916,.T.); +#24916 = EDGE_CURVE('',#24826,#24917,#24919,.T.); +#24917 = VERTEX_POINT('',#24918); +#24918 = CARTESIAN_POINT('',(-0.755,0.4,0.45)); +#24919 = LINE('',#24920,#24921); +#24920 = CARTESIAN_POINT('',(-0.755,-0.4,0.45)); +#24921 = VECTOR('',#24922,1.); +#24922 = DIRECTION('',(0.,1.,0.)); +#24923 = ORIENTED_EDGE('',*,*,#24924,.F.); +#24924 = EDGE_CURVE('',#24786,#24917,#24925,.T.); +#24925 = CIRCLE('',#24926,4.5E-02); +#24926 = AXIS2_PLACEMENT_3D('',#24927,#24928,#24929); +#24927 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#24928 = DIRECTION('',(0.,1.,0.)); +#24929 = DIRECTION('',(0.,-0.,1.)); +#24930 = ORIENTED_EDGE('',*,*,#24793,.F.); +#24931 = CYLINDRICAL_SURFACE('',#24932,4.5E-02); +#24932 = AXIS2_PLACEMENT_3D('',#24933,#24934,#24935); +#24933 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#24934 = DIRECTION('',(0.,1.,0.)); +#24935 = DIRECTION('',(-1.,0.,0.)); +#24936 = ADVANCED_FACE('',(#24937),#24998,.T.); +#24937 = FACE_BOUND('',#24938,.T.); +#24938 = EDGE_LOOP('',(#24939,#24947,#24948,#24949,#24950,#24958,#24967, + #24975,#24983,#24991)); +#24939 = ORIENTED_EDGE('',*,*,#24940,.F.); +#24940 = EDGE_CURVE('',#24892,#24941,#24943,.T.); +#24941 = VERTEX_POINT('',#24942); +#24942 = CARTESIAN_POINT('',(-0.545,0.4,-2.775557561563E-17)); +#24943 = LINE('',#24944,#24945); +#24944 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#24945 = VECTOR('',#24946,1.); +#24946 = DIRECTION('',(1.,0.,0.)); +#24947 = ORIENTED_EDGE('',*,*,#24891,.F.); +#24948 = ORIENTED_EDGE('',*,*,#24785,.T.); +#24949 = ORIENTED_EDGE('',*,*,#24924,.T.); +#24950 = ORIENTED_EDGE('',*,*,#24951,.T.); +#24951 = EDGE_CURVE('',#24917,#24952,#24954,.T.); +#24952 = VERTEX_POINT('',#24953); +#24953 = CARTESIAN_POINT('',(-0.545,0.4,0.45)); +#24954 = LINE('',#24955,#24956); +#24955 = CARTESIAN_POINT('',(-0.8,0.4,0.45)); +#24956 = VECTOR('',#24957,1.); +#24957 = DIRECTION('',(1.,0.,0.)); +#24958 = ORIENTED_EDGE('',*,*,#24959,.F.); +#24959 = EDGE_CURVE('',#24960,#24952,#24962,.T.); +#24960 = VERTEX_POINT('',#24961); +#24961 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#24962 = CIRCLE('',#24963,4.5E-02); +#24963 = AXIS2_PLACEMENT_3D('',#24964,#24965,#24966); +#24964 = CARTESIAN_POINT('',(-0.545,0.4,0.405)); +#24965 = DIRECTION('',(0.,-1.,0.)); +#24966 = DIRECTION('',(0.,0.,1.)); +#24967 = ORIENTED_EDGE('',*,*,#24968,.F.); +#24968 = EDGE_CURVE('',#24969,#24960,#24971,.T.); +#24969 = VERTEX_POINT('',#24970); +#24970 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#24971 = LINE('',#24972,#24973); +#24972 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#24973 = VECTOR('',#24974,1.); +#24974 = DIRECTION('',(1.,0.,0.)); +#24975 = ORIENTED_EDGE('',*,*,#24976,.F.); +#24976 = EDGE_CURVE('',#24977,#24969,#24979,.T.); +#24977 = VERTEX_POINT('',#24978); +#24978 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#24979 = LINE('',#24980,#24981); +#24980 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#24981 = VECTOR('',#24982,1.); +#24982 = DIRECTION('',(0.,0.,1.)); +#24983 = ORIENTED_EDGE('',*,*,#24984,.T.); +#24984 = EDGE_CURVE('',#24977,#24985,#24987,.T.); +#24985 = VERTEX_POINT('',#24986); +#24986 = CARTESIAN_POINT('',(-0.5,0.4,4.5E-02)); +#24987 = LINE('',#24988,#24989); +#24988 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#24989 = VECTOR('',#24990,1.); +#24990 = DIRECTION('',(1.,0.,0.)); +#24991 = ORIENTED_EDGE('',*,*,#24992,.T.); +#24992 = EDGE_CURVE('',#24985,#24941,#24993,.T.); +#24993 = CIRCLE('',#24994,4.5E-02); +#24994 = AXIS2_PLACEMENT_3D('',#24995,#24996,#24997); +#24995 = CARTESIAN_POINT('',(-0.545,0.4,4.5E-02)); +#24996 = DIRECTION('',(0.,1.,0.)); +#24997 = DIRECTION('',(0.,-0.,1.)); +#24998 = PLANE('',#24999); +#24999 = AXIS2_PLACEMENT_3D('',#25000,#25001,#25002); +#25000 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#25001 = DIRECTION('',(0.,1.,0.)); +#25002 = DIRECTION('',(0.,-0.,1.)); +#25003 = ADVANCED_FACE('',(#25004),#25015,.F.); +#25004 = FACE_BOUND('',#25005,.F.); +#25005 = EDGE_LOOP('',(#25006,#25007,#25008,#25009)); +#25006 = ORIENTED_EDGE('',*,*,#24940,.F.); +#25007 = ORIENTED_EDGE('',*,*,#24900,.F.); +#25008 = ORIENTED_EDGE('',*,*,#24807,.T.); +#25009 = ORIENTED_EDGE('',*,*,#25010,.T.); +#25010 = EDGE_CURVE('',#24810,#24941,#25011,.T.); +#25011 = LINE('',#25012,#25013); +#25012 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17)); +#25013 = VECTOR('',#25014,1.); +#25014 = DIRECTION('',(0.,1.,0.)); +#25015 = PLANE('',#25016); +#25016 = AXIS2_PLACEMENT_3D('',#25017,#25018,#25019); +#25017 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#25018 = DIRECTION('',(0.,0.,1.)); +#25019 = DIRECTION('',(1.,0.,-0.)); +#25020 = ADVANCED_FACE('',(#25021),#25032,.T.); +#25021 = FACE_BOUND('',#25022,.T.); +#25022 = EDGE_LOOP('',(#25023,#25024,#25025,#25026)); +#25023 = ORIENTED_EDGE('',*,*,#24875,.T.); +#25024 = ORIENTED_EDGE('',*,*,#25010,.T.); +#25025 = ORIENTED_EDGE('',*,*,#24992,.F.); +#25026 = ORIENTED_EDGE('',*,*,#25027,.F.); +#25027 = EDGE_CURVE('',#24868,#24985,#25028,.T.); +#25028 = LINE('',#25029,#25030); +#25029 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02)); +#25030 = VECTOR('',#25031,1.); +#25031 = DIRECTION('',(0.,1.,0.)); +#25032 = CYLINDRICAL_SURFACE('',#25033,4.5E-02); +#25033 = AXIS2_PLACEMENT_3D('',#25034,#25035,#25036); +#25034 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02)); +#25035 = DIRECTION('',(0.,1.,0.)); +#25036 = DIRECTION('',(1.,0.,0.)); +#25037 = ADVANCED_FACE('',(#25038),#25081,.F.); +#25038 = FACE_BOUND('',#25039,.F.); +#25039 = EDGE_LOOP('',(#25040,#25041,#25042,#25043,#25051,#25059,#25067, + #25075)); +#25040 = ORIENTED_EDGE('',*,*,#24867,.F.); +#25041 = ORIENTED_EDGE('',*,*,#24859,.T.); +#25042 = ORIENTED_EDGE('',*,*,#24851,.T.); +#25043 = ORIENTED_EDGE('',*,*,#25044,.T.); +#25044 = EDGE_CURVE('',#24843,#25045,#25047,.T.); +#25045 = VERTEX_POINT('',#25046); +#25046 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#25047 = LINE('',#25048,#25049); +#25048 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#25049 = VECTOR('',#25050,1.); +#25050 = DIRECTION('',(1.,0.,0.)); +#25051 = ORIENTED_EDGE('',*,*,#25052,.T.); +#25052 = EDGE_CURVE('',#25045,#25053,#25055,.T.); +#25053 = VERTEX_POINT('',#25054); +#25054 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#25055 = LINE('',#25056,#25057); +#25056 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#25057 = VECTOR('',#25058,1.); +#25058 = DIRECTION('',(1.,0.,0.)); +#25059 = ORIENTED_EDGE('',*,*,#25060,.F.); +#25060 = EDGE_CURVE('',#25061,#25053,#25063,.T.); +#25061 = VERTEX_POINT('',#25062); +#25062 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#25063 = LINE('',#25064,#25065); +#25064 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#25065 = VECTOR('',#25066,1.); +#25066 = DIRECTION('',(0.,0.,1.)); +#25067 = ORIENTED_EDGE('',*,*,#25068,.F.); +#25068 = EDGE_CURVE('',#25069,#25061,#25071,.T.); +#25069 = VERTEX_POINT('',#25070); +#25070 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02)); +#25071 = LINE('',#25072,#25073); +#25072 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#25073 = VECTOR('',#25074,1.); +#25074 = DIRECTION('',(1.,0.,0.)); +#25075 = ORIENTED_EDGE('',*,*,#25076,.F.); +#25076 = EDGE_CURVE('',#24868,#25069,#25077,.T.); +#25077 = LINE('',#25078,#25079); +#25078 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#25079 = VECTOR('',#25080,1.); +#25080 = DIRECTION('',(1.,0.,0.)); +#25081 = PLANE('',#25082); +#25082 = AXIS2_PLACEMENT_3D('',#25083,#25084,#25085); +#25083 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#25084 = DIRECTION('',(0.,1.,0.)); +#25085 = DIRECTION('',(0.,-0.,1.)); +#25086 = ADVANCED_FACE('',(#25087),#25098,.T.); +#25087 = FACE_BOUND('',#25088,.T.); +#25088 = EDGE_LOOP('',(#25089,#25090,#25091,#25092)); +#25089 = ORIENTED_EDGE('',*,*,#24951,.F.); +#25090 = ORIENTED_EDGE('',*,*,#24916,.F.); +#25091 = ORIENTED_EDGE('',*,*,#24834,.T.); +#25092 = ORIENTED_EDGE('',*,*,#25093,.T.); +#25093 = EDGE_CURVE('',#24835,#24952,#25094,.T.); +#25094 = LINE('',#25095,#25096); +#25095 = CARTESIAN_POINT('',(-0.545,-0.4,0.45)); +#25096 = VECTOR('',#25097,1.); +#25097 = DIRECTION('',(0.,1.,0.)); +#25098 = PLANE('',#25099); +#25099 = AXIS2_PLACEMENT_3D('',#25100,#25101,#25102); +#25100 = CARTESIAN_POINT('',(-0.8,-0.4,0.45)); +#25101 = DIRECTION('',(0.,0.,1.)); +#25102 = DIRECTION('',(1.,0.,-0.)); +#25103 = ADVANCED_FACE('',(#25104),#25115,.T.); +#25104 = FACE_BOUND('',#25105,.T.); +#25105 = EDGE_LOOP('',(#25106,#25112,#25113,#25114)); +#25106 = ORIENTED_EDGE('',*,*,#25107,.T.); +#25107 = EDGE_CURVE('',#24843,#24960,#25108,.T.); +#25108 = LINE('',#25109,#25110); +#25109 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#25110 = VECTOR('',#25111,1.); +#25111 = DIRECTION('',(0.,1.,0.)); +#25112 = ORIENTED_EDGE('',*,*,#24959,.T.); +#25113 = ORIENTED_EDGE('',*,*,#25093,.F.); +#25114 = ORIENTED_EDGE('',*,*,#24842,.F.); +#25115 = CYLINDRICAL_SURFACE('',#25116,4.5E-02); +#25116 = AXIS2_PLACEMENT_3D('',#25117,#25118,#25119); +#25117 = CARTESIAN_POINT('',(-0.545,-0.4,0.405)); +#25118 = DIRECTION('',(0.,1.,0.)); +#25119 = DIRECTION('',(1.,0.,0.)); +#25120 = ADVANCED_FACE('',(#25121),#25164,.T.); +#25121 = FACE_BOUND('',#25122,.T.); +#25122 = EDGE_LOOP('',(#25123,#25124,#25125,#25126,#25134,#25142,#25150, + #25158)); +#25123 = ORIENTED_EDGE('',*,*,#24984,.F.); +#25124 = ORIENTED_EDGE('',*,*,#24976,.T.); +#25125 = ORIENTED_EDGE('',*,*,#24968,.T.); +#25126 = ORIENTED_EDGE('',*,*,#25127,.T.); +#25127 = EDGE_CURVE('',#24960,#25128,#25130,.T.); +#25128 = VERTEX_POINT('',#25129); +#25129 = CARTESIAN_POINT('',(0.5,0.4,0.405)); +#25130 = LINE('',#25131,#25132); +#25131 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#25132 = VECTOR('',#25133,1.); +#25133 = DIRECTION('',(1.,0.,0.)); +#25134 = ORIENTED_EDGE('',*,*,#25135,.T.); +#25135 = EDGE_CURVE('',#25128,#25136,#25138,.T.); +#25136 = VERTEX_POINT('',#25137); +#25137 = CARTESIAN_POINT('',(0.755,0.4,0.405)); +#25138 = LINE('',#25139,#25140); +#25139 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#25140 = VECTOR('',#25141,1.); +#25141 = DIRECTION('',(1.,0.,0.)); +#25142 = ORIENTED_EDGE('',*,*,#25143,.F.); +#25143 = EDGE_CURVE('',#25144,#25136,#25146,.T.); +#25144 = VERTEX_POINT('',#25145); +#25145 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#25146 = LINE('',#25147,#25148); +#25147 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#25148 = VECTOR('',#25149,1.); +#25149 = DIRECTION('',(0.,0.,1.)); +#25150 = ORIENTED_EDGE('',*,*,#25151,.F.); +#25151 = EDGE_CURVE('',#25152,#25144,#25154,.T.); +#25152 = VERTEX_POINT('',#25153); +#25153 = CARTESIAN_POINT('',(0.5,0.4,4.5E-02)); +#25154 = LINE('',#25155,#25156); +#25155 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#25156 = VECTOR('',#25157,1.); +#25157 = DIRECTION('',(1.,0.,0.)); +#25158 = ORIENTED_EDGE('',*,*,#25159,.F.); +#25159 = EDGE_CURVE('',#24985,#25152,#25160,.T.); +#25160 = LINE('',#25161,#25162); +#25161 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#25162 = VECTOR('',#25163,1.); +#25163 = DIRECTION('',(1.,0.,0.)); +#25164 = PLANE('',#25165); +#25165 = AXIS2_PLACEMENT_3D('',#25166,#25167,#25168); +#25166 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#25167 = DIRECTION('',(0.,1.,0.)); +#25168 = DIRECTION('',(0.,-0.,1.)); +#25169 = ADVANCED_FACE('',(#25170),#25181,.F.); +#25170 = FACE_BOUND('',#25171,.F.); +#25171 = EDGE_LOOP('',(#25172,#25173,#25174,#25180)); +#25172 = ORIENTED_EDGE('',*,*,#25027,.F.); +#25173 = ORIENTED_EDGE('',*,*,#25076,.T.); +#25174 = ORIENTED_EDGE('',*,*,#25175,.T.); +#25175 = EDGE_CURVE('',#25069,#25152,#25176,.T.); +#25176 = LINE('',#25177,#25178); +#25177 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02)); +#25178 = VECTOR('',#25179,1.); +#25179 = DIRECTION('',(0.,1.,0.)); +#25180 = ORIENTED_EDGE('',*,*,#25159,.F.); +#25181 = PLANE('',#25182); +#25182 = AXIS2_PLACEMENT_3D('',#25183,#25184,#25185); +#25183 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#25184 = DIRECTION('',(0.,0.,1.)); +#25185 = DIRECTION('',(1.,0.,-0.)); +#25186 = ADVANCED_FACE('',(#25187),#25250,.F.); +#25187 = FACE_BOUND('',#25188,.F.); +#25188 = EDGE_LOOP('',(#25189,#25199,#25206,#25207,#25208,#25209,#25218, + #25226,#25235,#25243)); +#25189 = ORIENTED_EDGE('',*,*,#25190,.F.); +#25190 = EDGE_CURVE('',#25191,#25193,#25195,.T.); +#25191 = VERTEX_POINT('',#25192); +#25192 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17)); +#25193 = VERTEX_POINT('',#25194); +#25194 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17)); +#25195 = LINE('',#25196,#25197); +#25196 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#25197 = VECTOR('',#25198,1.); +#25198 = DIRECTION('',(1.,0.,0.)); +#25199 = ORIENTED_EDGE('',*,*,#25200,.F.); +#25200 = EDGE_CURVE('',#25069,#25191,#25201,.T.); +#25201 = CIRCLE('',#25202,4.5E-02); +#25202 = AXIS2_PLACEMENT_3D('',#25203,#25204,#25205); +#25203 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02)); +#25204 = DIRECTION('',(0.,-1.,0.)); +#25205 = DIRECTION('',(0.,0.,1.)); +#25206 = ORIENTED_EDGE('',*,*,#25068,.T.); +#25207 = ORIENTED_EDGE('',*,*,#25060,.T.); +#25208 = ORIENTED_EDGE('',*,*,#25052,.F.); +#25209 = ORIENTED_EDGE('',*,*,#25210,.T.); +#25210 = EDGE_CURVE('',#25045,#25211,#25213,.T.); +#25211 = VERTEX_POINT('',#25212); +#25212 = CARTESIAN_POINT('',(0.545,-0.4,0.45)); +#25213 = CIRCLE('',#25214,4.5E-02); +#25214 = AXIS2_PLACEMENT_3D('',#25215,#25216,#25217); +#25215 = CARTESIAN_POINT('',(0.545,-0.4,0.405)); +#25216 = DIRECTION('',(0.,1.,0.)); +#25217 = DIRECTION('',(0.,-0.,1.)); +#25218 = ORIENTED_EDGE('',*,*,#25219,.T.); +#25219 = EDGE_CURVE('',#25211,#25220,#25222,.T.); +#25220 = VERTEX_POINT('',#25221); +#25221 = CARTESIAN_POINT('',(0.755,-0.4,0.45)); +#25222 = LINE('',#25223,#25224); +#25223 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#25224 = VECTOR('',#25225,1.); +#25225 = DIRECTION('',(1.,0.,0.)); +#25226 = ORIENTED_EDGE('',*,*,#25227,.F.); +#25227 = EDGE_CURVE('',#25228,#25220,#25230,.T.); +#25228 = VERTEX_POINT('',#25229); +#25229 = CARTESIAN_POINT('',(0.8,-0.4,0.405)); +#25230 = CIRCLE('',#25231,4.5E-02); +#25231 = AXIS2_PLACEMENT_3D('',#25232,#25233,#25234); +#25232 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#25233 = DIRECTION('',(0.,-1.,0.)); +#25234 = DIRECTION('',(0.,0.,1.)); +#25235 = ORIENTED_EDGE('',*,*,#25236,.F.); +#25236 = EDGE_CURVE('',#25237,#25228,#25239,.T.); +#25237 = VERTEX_POINT('',#25238); +#25238 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02)); +#25239 = LINE('',#25240,#25241); +#25240 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#25241 = VECTOR('',#25242,1.); +#25242 = DIRECTION('',(0.,0.,1.)); +#25243 = ORIENTED_EDGE('',*,*,#25244,.T.); +#25244 = EDGE_CURVE('',#25237,#25193,#25245,.T.); +#25245 = CIRCLE('',#25246,4.5E-02); +#25246 = AXIS2_PLACEMENT_3D('',#25247,#25248,#25249); +#25247 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#25248 = DIRECTION('',(0.,1.,0.)); +#25249 = DIRECTION('',(0.,-0.,1.)); +#25250 = PLANE('',#25251); +#25251 = AXIS2_PLACEMENT_3D('',#25252,#25253,#25254); +#25252 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#25253 = DIRECTION('',(0.,1.,0.)); +#25254 = DIRECTION('',(0.,-0.,1.)); +#25255 = ADVANCED_FACE('',(#25256),#25281,.F.); +#25256 = FACE_BOUND('',#25257,.F.); +#25257 = EDGE_LOOP('',(#25258,#25259,#25267,#25275)); +#25258 = ORIENTED_EDGE('',*,*,#25044,.F.); +#25259 = ORIENTED_EDGE('',*,*,#25260,.T.); +#25260 = EDGE_CURVE('',#24843,#25261,#25263,.T.); +#25261 = VERTEX_POINT('',#25262); +#25262 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#25263 = LINE('',#25264,#25265); +#25264 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#25265 = VECTOR('',#25266,1.); +#25266 = DIRECTION('',(0.,0.,1.)); +#25267 = ORIENTED_EDGE('',*,*,#25268,.T.); +#25268 = EDGE_CURVE('',#25261,#25269,#25271,.T.); +#25269 = VERTEX_POINT('',#25270); +#25270 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#25271 = LINE('',#25272,#25273); +#25272 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#25273 = VECTOR('',#25274,1.); +#25274 = DIRECTION('',(1.,0.,0.)); +#25275 = ORIENTED_EDGE('',*,*,#25276,.F.); +#25276 = EDGE_CURVE('',#25045,#25269,#25277,.T.); +#25277 = LINE('',#25278,#25279); +#25278 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#25279 = VECTOR('',#25280,1.); +#25280 = DIRECTION('',(0.,0.,1.)); +#25281 = PLANE('',#25282); +#25282 = AXIS2_PLACEMENT_3D('',#25283,#25284,#25285); +#25283 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#25284 = DIRECTION('',(0.,1.,0.)); +#25285 = DIRECTION('',(0.,-0.,1.)); +#25286 = ADVANCED_FACE('',(#25287),#25305,.F.); +#25287 = FACE_BOUND('',#25288,.F.); +#25288 = EDGE_LOOP('',(#25289,#25290,#25291,#25299)); +#25289 = ORIENTED_EDGE('',*,*,#25260,.F.); +#25290 = ORIENTED_EDGE('',*,*,#25107,.T.); +#25291 = ORIENTED_EDGE('',*,*,#25292,.T.); +#25292 = EDGE_CURVE('',#24960,#25293,#25295,.T.); +#25293 = VERTEX_POINT('',#25294); +#25294 = CARTESIAN_POINT('',(-0.5,0.4,0.45)); +#25295 = LINE('',#25296,#25297); +#25296 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#25297 = VECTOR('',#25298,1.); +#25298 = DIRECTION('',(0.,0.,1.)); +#25299 = ORIENTED_EDGE('',*,*,#25300,.F.); +#25300 = EDGE_CURVE('',#25261,#25293,#25301,.T.); +#25301 = LINE('',#25302,#25303); +#25302 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#25303 = VECTOR('',#25304,1.); +#25304 = DIRECTION('',(0.,1.,0.)); +#25305 = PLANE('',#25306); +#25306 = AXIS2_PLACEMENT_3D('',#25307,#25308,#25309); +#25307 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#25308 = DIRECTION('',(1.,0.,0.)); +#25309 = DIRECTION('',(0.,0.,1.)); +#25310 = ADVANCED_FACE('',(#25311),#25374,.T.); +#25311 = FACE_BOUND('',#25312,.T.); +#25312 = EDGE_LOOP('',(#25313,#25323,#25330,#25331,#25332,#25333,#25342, + #25350,#25359,#25367)); +#25313 = ORIENTED_EDGE('',*,*,#25314,.F.); +#25314 = EDGE_CURVE('',#25315,#25317,#25319,.T.); +#25315 = VERTEX_POINT('',#25316); +#25316 = CARTESIAN_POINT('',(0.545,0.4,-2.775557561563E-17)); +#25317 = VERTEX_POINT('',#25318); +#25318 = CARTESIAN_POINT('',(0.755,0.4,-2.775557561563E-17)); +#25319 = LINE('',#25320,#25321); +#25320 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#25321 = VECTOR('',#25322,1.); +#25322 = DIRECTION('',(1.,0.,0.)); +#25323 = ORIENTED_EDGE('',*,*,#25324,.F.); +#25324 = EDGE_CURVE('',#25152,#25315,#25325,.T.); +#25325 = CIRCLE('',#25326,4.5E-02); +#25326 = AXIS2_PLACEMENT_3D('',#25327,#25328,#25329); +#25327 = CARTESIAN_POINT('',(0.545,0.4,4.5E-02)); +#25328 = DIRECTION('',(0.,-1.,0.)); +#25329 = DIRECTION('',(0.,0.,1.)); +#25330 = ORIENTED_EDGE('',*,*,#25151,.T.); +#25331 = ORIENTED_EDGE('',*,*,#25143,.T.); +#25332 = ORIENTED_EDGE('',*,*,#25135,.F.); +#25333 = ORIENTED_EDGE('',*,*,#25334,.T.); +#25334 = EDGE_CURVE('',#25128,#25335,#25337,.T.); +#25335 = VERTEX_POINT('',#25336); +#25336 = CARTESIAN_POINT('',(0.545,0.4,0.45)); +#25337 = CIRCLE('',#25338,4.5E-02); +#25338 = AXIS2_PLACEMENT_3D('',#25339,#25340,#25341); +#25339 = CARTESIAN_POINT('',(0.545,0.4,0.405)); +#25340 = DIRECTION('',(0.,1.,0.)); +#25341 = DIRECTION('',(0.,-0.,1.)); +#25342 = ORIENTED_EDGE('',*,*,#25343,.T.); +#25343 = EDGE_CURVE('',#25335,#25344,#25346,.T.); +#25344 = VERTEX_POINT('',#25345); +#25345 = CARTESIAN_POINT('',(0.755,0.4,0.45)); +#25346 = LINE('',#25347,#25348); +#25347 = CARTESIAN_POINT('',(0.5,0.4,0.45)); +#25348 = VECTOR('',#25349,1.); +#25349 = DIRECTION('',(1.,0.,0.)); +#25350 = ORIENTED_EDGE('',*,*,#25351,.F.); +#25351 = EDGE_CURVE('',#25352,#25344,#25354,.T.); +#25352 = VERTEX_POINT('',#25353); +#25353 = CARTESIAN_POINT('',(0.8,0.4,0.405)); +#25354 = CIRCLE('',#25355,4.5E-02); +#25355 = AXIS2_PLACEMENT_3D('',#25356,#25357,#25358); +#25356 = CARTESIAN_POINT('',(0.755,0.4,0.405)); +#25357 = DIRECTION('',(0.,-1.,0.)); +#25358 = DIRECTION('',(0.,0.,1.)); +#25359 = ORIENTED_EDGE('',*,*,#25360,.F.); +#25360 = EDGE_CURVE('',#25361,#25352,#25363,.T.); +#25361 = VERTEX_POINT('',#25362); +#25362 = CARTESIAN_POINT('',(0.8,0.4,4.5E-02)); +#25363 = LINE('',#25364,#25365); +#25364 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#25365 = VECTOR('',#25366,1.); +#25366 = DIRECTION('',(0.,0.,1.)); +#25367 = ORIENTED_EDGE('',*,*,#25368,.T.); +#25368 = EDGE_CURVE('',#25361,#25317,#25369,.T.); +#25369 = CIRCLE('',#25370,4.5E-02); +#25370 = AXIS2_PLACEMENT_3D('',#25371,#25372,#25373); +#25371 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#25372 = DIRECTION('',(0.,1.,0.)); +#25373 = DIRECTION('',(0.,-0.,1.)); +#25374 = PLANE('',#25375); +#25375 = AXIS2_PLACEMENT_3D('',#25376,#25377,#25378); +#25376 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#25377 = DIRECTION('',(0.,1.,0.)); +#25378 = DIRECTION('',(0.,-0.,1.)); +#25379 = ADVANCED_FACE('',(#25380),#25398,.T.); +#25380 = FACE_BOUND('',#25381,.T.); +#25381 = EDGE_LOOP('',(#25382,#25383,#25384,#25392)); +#25382 = ORIENTED_EDGE('',*,*,#25127,.F.); +#25383 = ORIENTED_EDGE('',*,*,#25292,.T.); +#25384 = ORIENTED_EDGE('',*,*,#25385,.T.); +#25385 = EDGE_CURVE('',#25293,#25386,#25388,.T.); +#25386 = VERTEX_POINT('',#25387); +#25387 = CARTESIAN_POINT('',(0.5,0.4,0.45)); +#25388 = LINE('',#25389,#25390); +#25389 = CARTESIAN_POINT('',(-0.5,0.4,0.45)); +#25390 = VECTOR('',#25391,1.); +#25391 = DIRECTION('',(1.,0.,0.)); +#25392 = ORIENTED_EDGE('',*,*,#25393,.F.); +#25393 = EDGE_CURVE('',#25128,#25386,#25394,.T.); +#25394 = LINE('',#25395,#25396); +#25395 = CARTESIAN_POINT('',(0.5,0.4,0.405)); +#25396 = VECTOR('',#25397,1.); +#25397 = DIRECTION('',(0.,0.,1.)); +#25398 = PLANE('',#25399); +#25399 = AXIS2_PLACEMENT_3D('',#25400,#25401,#25402); +#25400 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#25401 = DIRECTION('',(0.,1.,0.)); +#25402 = DIRECTION('',(0.,-0.,1.)); +#25403 = ADVANCED_FACE('',(#25404),#25415,.T.); +#25404 = FACE_BOUND('',#25405,.T.); +#25405 = EDGE_LOOP('',(#25406,#25407,#25408,#25414)); +#25406 = ORIENTED_EDGE('',*,*,#25175,.T.); +#25407 = ORIENTED_EDGE('',*,*,#25324,.T.); +#25408 = ORIENTED_EDGE('',*,*,#25409,.F.); +#25409 = EDGE_CURVE('',#25191,#25315,#25410,.T.); +#25410 = LINE('',#25411,#25412); +#25411 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17)); +#25412 = VECTOR('',#25413,1.); +#25413 = DIRECTION('',(0.,1.,0.)); +#25414 = ORIENTED_EDGE('',*,*,#25200,.F.); +#25415 = CYLINDRICAL_SURFACE('',#25416,4.5E-02); +#25416 = AXIS2_PLACEMENT_3D('',#25417,#25418,#25419); +#25417 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02)); +#25418 = DIRECTION('',(0.,1.,0.)); +#25419 = DIRECTION('',(-1.,0.,0.)); +#25420 = ADVANCED_FACE('',(#25421),#25432,.F.); +#25421 = FACE_BOUND('',#25422,.F.); +#25422 = EDGE_LOOP('',(#25423,#25424,#25425,#25426)); +#25423 = ORIENTED_EDGE('',*,*,#25314,.F.); +#25424 = ORIENTED_EDGE('',*,*,#25409,.F.); +#25425 = ORIENTED_EDGE('',*,*,#25190,.T.); +#25426 = ORIENTED_EDGE('',*,*,#25427,.T.); +#25427 = EDGE_CURVE('',#25193,#25317,#25428,.T.); +#25428 = LINE('',#25429,#25430); +#25429 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17)); +#25430 = VECTOR('',#25431,1.); +#25431 = DIRECTION('',(0.,1.,0.)); +#25432 = PLANE('',#25433); +#25433 = AXIS2_PLACEMENT_3D('',#25434,#25435,#25436); +#25434 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#25435 = DIRECTION('',(0.,0.,1.)); +#25436 = DIRECTION('',(1.,0.,-0.)); +#25437 = ADVANCED_FACE('',(#25438),#25449,.T.); +#25438 = FACE_BOUND('',#25439,.T.); +#25439 = EDGE_LOOP('',(#25440,#25441,#25442,#25443)); +#25440 = ORIENTED_EDGE('',*,*,#25244,.T.); +#25441 = ORIENTED_EDGE('',*,*,#25427,.T.); +#25442 = ORIENTED_EDGE('',*,*,#25368,.F.); +#25443 = ORIENTED_EDGE('',*,*,#25444,.F.); +#25444 = EDGE_CURVE('',#25237,#25361,#25445,.T.); +#25445 = LINE('',#25446,#25447); +#25446 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02)); +#25447 = VECTOR('',#25448,1.); +#25448 = DIRECTION('',(0.,1.,0.)); +#25449 = CYLINDRICAL_SURFACE('',#25450,4.5E-02); +#25450 = AXIS2_PLACEMENT_3D('',#25451,#25452,#25453); +#25451 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#25452 = DIRECTION('',(0.,1.,0.)); +#25453 = DIRECTION('',(1.,0.,0.)); +#25454 = ADVANCED_FACE('',(#25455),#25466,.T.); +#25455 = FACE_BOUND('',#25456,.T.); +#25456 = EDGE_LOOP('',(#25457,#25458,#25459,#25460)); +#25457 = ORIENTED_EDGE('',*,*,#25236,.F.); +#25458 = ORIENTED_EDGE('',*,*,#25444,.T.); +#25459 = ORIENTED_EDGE('',*,*,#25360,.T.); +#25460 = ORIENTED_EDGE('',*,*,#25461,.F.); +#25461 = EDGE_CURVE('',#25228,#25352,#25462,.T.); +#25462 = LINE('',#25463,#25464); +#25463 = CARTESIAN_POINT('',(0.8,-0.4,0.405)); +#25464 = VECTOR('',#25465,1.); +#25465 = DIRECTION('',(0.,1.,0.)); +#25466 = PLANE('',#25467); +#25467 = AXIS2_PLACEMENT_3D('',#25468,#25469,#25470); +#25468 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#25469 = DIRECTION('',(1.,0.,0.)); +#25470 = DIRECTION('',(0.,0.,1.)); +#25471 = ADVANCED_FACE('',(#25472),#25483,.T.); +#25472 = FACE_BOUND('',#25473,.T.); +#25473 = EDGE_LOOP('',(#25474,#25475,#25476,#25482)); +#25474 = ORIENTED_EDGE('',*,*,#25461,.T.); +#25475 = ORIENTED_EDGE('',*,*,#25351,.T.); +#25476 = ORIENTED_EDGE('',*,*,#25477,.F.); +#25477 = EDGE_CURVE('',#25220,#25344,#25478,.T.); +#25478 = LINE('',#25479,#25480); +#25479 = CARTESIAN_POINT('',(0.755,-0.4,0.45)); +#25480 = VECTOR('',#25481,1.); +#25481 = DIRECTION('',(0.,1.,0.)); +#25482 = ORIENTED_EDGE('',*,*,#25227,.F.); +#25483 = CYLINDRICAL_SURFACE('',#25484,4.5E-02); +#25484 = AXIS2_PLACEMENT_3D('',#25485,#25486,#25487); +#25485 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#25486 = DIRECTION('',(0.,1.,0.)); +#25487 = DIRECTION('',(1.,0.,0.)); +#25488 = ADVANCED_FACE('',(#25489),#25500,.T.); +#25489 = FACE_BOUND('',#25490,.T.); +#25490 = EDGE_LOOP('',(#25491,#25492,#25498,#25499)); +#25491 = ORIENTED_EDGE('',*,*,#25343,.F.); +#25492 = ORIENTED_EDGE('',*,*,#25493,.F.); +#25493 = EDGE_CURVE('',#25211,#25335,#25494,.T.); +#25494 = LINE('',#25495,#25496); +#25495 = CARTESIAN_POINT('',(0.545,-0.4,0.45)); +#25496 = VECTOR('',#25497,1.); +#25497 = DIRECTION('',(0.,1.,0.)); +#25498 = ORIENTED_EDGE('',*,*,#25219,.T.); +#25499 = ORIENTED_EDGE('',*,*,#25477,.T.); +#25500 = PLANE('',#25501); +#25501 = AXIS2_PLACEMENT_3D('',#25502,#25503,#25504); +#25502 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#25503 = DIRECTION('',(0.,0.,1.)); +#25504 = DIRECTION('',(1.,0.,-0.)); +#25505 = ADVANCED_FACE('',(#25506),#25517,.T.); +#25506 = FACE_BOUND('',#25507,.T.); +#25507 = EDGE_LOOP('',(#25508,#25509,#25510,#25511)); +#25508 = ORIENTED_EDGE('',*,*,#25210,.T.); +#25509 = ORIENTED_EDGE('',*,*,#25493,.T.); +#25510 = ORIENTED_EDGE('',*,*,#25334,.F.); +#25511 = ORIENTED_EDGE('',*,*,#25512,.F.); +#25512 = EDGE_CURVE('',#25045,#25128,#25513,.T.); +#25513 = LINE('',#25514,#25515); +#25514 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#25515 = VECTOR('',#25516,1.); +#25516 = DIRECTION('',(0.,1.,0.)); +#25517 = CYLINDRICAL_SURFACE('',#25518,4.5E-02); +#25518 = AXIS2_PLACEMENT_3D('',#25519,#25520,#25521); +#25519 = CARTESIAN_POINT('',(0.545,-0.4,0.405)); +#25520 = DIRECTION('',(0.,1.,0.)); +#25521 = DIRECTION('',(-1.,0.,0.)); +#25522 = ADVANCED_FACE('',(#25523),#25534,.T.); +#25523 = FACE_BOUND('',#25524,.T.); +#25524 = EDGE_LOOP('',(#25525,#25526,#25527,#25528)); +#25525 = ORIENTED_EDGE('',*,*,#25276,.F.); +#25526 = ORIENTED_EDGE('',*,*,#25512,.T.); +#25527 = ORIENTED_EDGE('',*,*,#25393,.T.); +#25528 = ORIENTED_EDGE('',*,*,#25529,.F.); +#25529 = EDGE_CURVE('',#25269,#25386,#25530,.T.); +#25530 = LINE('',#25531,#25532); +#25531 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#25532 = VECTOR('',#25533,1.); +#25533 = DIRECTION('',(0.,1.,0.)); +#25534 = PLANE('',#25535); +#25535 = AXIS2_PLACEMENT_3D('',#25536,#25537,#25538); +#25536 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#25537 = DIRECTION('',(1.,0.,0.)); +#25538 = DIRECTION('',(0.,0.,1.)); +#25539 = ADVANCED_FACE('',(#25540),#25546,.T.); +#25540 = FACE_BOUND('',#25541,.T.); +#25541 = EDGE_LOOP('',(#25542,#25543,#25544,#25545)); +#25542 = ORIENTED_EDGE('',*,*,#25300,.F.); +#25543 = ORIENTED_EDGE('',*,*,#25268,.T.); +#25544 = ORIENTED_EDGE('',*,*,#25529,.T.); +#25545 = ORIENTED_EDGE('',*,*,#25385,.F.); +#25546 = PLANE('',#25547); +#25547 = AXIS2_PLACEMENT_3D('',#25548,#25549,#25550); +#25548 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#25549 = DIRECTION('',(0.,0.,1.)); +#25550 = DIRECTION('',(1.,0.,-0.)); +#25551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#25555)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#25552,#25553,#25554)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#25552 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#25553 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#25554 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#25555 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#25552, + 'distance_accuracy_value','confusion accuracy'); +#25556 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25557,#25559); +#25557 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25558) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25558 = ITEM_DEFINED_TRANSFORMATION('','',#11,#127); +#25559 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25560); +#25560 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('29','R1','',#5,#24755,$); +#25561 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#24757)); +#25562 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25563,#25565); +#25563 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25564) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25564 = ITEM_DEFINED_TRANSFORMATION('','',#11,#131); +#25565 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25566); +#25566 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('30','R10','',#5,#24755,$); +#25567 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25568,#25570); +#25568 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25569) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25569 = ITEM_DEFINED_TRANSFORMATION('','',#11,#135); +#25570 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25571); +#25571 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('31','R11','',#5,#24755,$); +#25572 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25573,#25575); +#25573 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25574) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25574 = ITEM_DEFINED_TRANSFORMATION('','',#11,#139); +#25575 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25576); +#25576 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('32','R12','',#5,#24755,$); +#25577 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25578,#25580); +#25578 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25579) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25579 = ITEM_DEFINED_TRANSFORMATION('','',#11,#143); +#25580 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25581); +#25581 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('33','R13','',#5,#24755,$); +#25582 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25583,#25585); +#25583 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25584) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25584 = ITEM_DEFINED_TRANSFORMATION('','',#11,#147); +#25585 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25586); +#25586 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('34','R14','',#5,#24755,$); +#25587 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25588,#25590); +#25588 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25589) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25589 = ITEM_DEFINED_TRANSFORMATION('','',#11,#151); +#25590 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25591); +#25591 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('35','R15','',#5,#24755,$); +#25592 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25593,#25595); +#25593 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25594) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25594 = ITEM_DEFINED_TRANSFORMATION('','',#11,#155); +#25595 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25596); +#25596 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('36','R2','',#5,#24755,$); +#25597 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25598,#25600); +#25598 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25599) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25599 = ITEM_DEFINED_TRANSFORMATION('','',#11,#159); +#25600 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25601); +#25601 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('37','R3','',#5,#24755,$); +#25602 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25603,#25605); +#25603 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25604) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25604 = ITEM_DEFINED_TRANSFORMATION('','',#11,#163); +#25605 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25606); +#25606 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('38','R4','',#5,#24755,$); +#25607 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25608,#25610); +#25608 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25609) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25609 = ITEM_DEFINED_TRANSFORMATION('','',#11,#167); +#25610 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25611); +#25611 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('39','R5','',#5,#24755,$); +#25612 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25613,#25615); +#25613 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25614) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25614 = ITEM_DEFINED_TRANSFORMATION('','',#11,#171); +#25615 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25616); +#25616 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('40','R6','',#5,#24755,$); +#25617 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25618,#25620); +#25618 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25619) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25619 = ITEM_DEFINED_TRANSFORMATION('','',#11,#175); +#25620 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25621); +#25621 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('41','R8','',#5,#24755,$); +#25622 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#25623,#25625); +#25623 = ( REPRESENTATION_RELATIONSHIP('','',#24760,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#25624) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#25624 = ITEM_DEFINED_TRANSFORMATION('','',#11,#179); +#25625 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #25626); +#25626 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('42','R9','',#5,#24755,$); +#25627 = SHAPE_DEFINITION_REPRESENTATION(#25628,#25634); +#25628 = PRODUCT_DEFINITION_SHAPE('','',#25629); +#25629 = PRODUCT_DEFINITION('design','',#25630,#25633); +#25630 = PRODUCT_DEFINITION_FORMATION('','',#25631); +#25631 = PRODUCT('SW_SPST_B3U-1000P','SW_SPST_B3U-1000P','',(#25632)); +#25632 = PRODUCT_CONTEXT('',#2,'mechanical'); +#25633 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#25634 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#25635),#28269); +#25635 = MANIFOLD_SOLID_BREP('',#25636); +#25636 = CLOSED_SHELL('',(#25637,#25741,#25891,#25931,#25955,#25988, + #26115,#26139,#26171,#26211,#26243,#26267,#26387,#26420,#26453, + #26486,#26558,#26598,#26638,#26671,#26702,#26751,#26775,#26799, + #26823,#26840,#26864,#26895,#26926,#26958,#26988,#27019,#27049, + #27074,#27098,#27115,#27159,#27217,#27240,#27264,#27288,#27305, + #27322,#27346,#27383,#27414,#27432,#27464,#27488,#27512,#27543, + #27555,#27582,#27594,#27611,#27629,#27662,#27680,#27722,#27739, + #27785,#27797,#27834,#27851,#27868,#27928,#27940,#27952,#27980, + #27992,#28004,#28029,#28075,#28107,#28131,#28156,#28174,#28199, + #28224,#28241,#28259)); +#25637 = ADVANCED_FACE('',(#25638),#25736,.F.); +#25638 = FACE_BOUND('',#25639,.F.); +#25639 = EDGE_LOOP('',(#25640,#25650,#25658,#25666,#25674,#25682,#25690, + #25698,#25706,#25714,#25722,#25730)); +#25640 = ORIENTED_EDGE('',*,*,#25641,.F.); +#25641 = EDGE_CURVE('',#25642,#25644,#25646,.T.); +#25642 = VERTEX_POINT('',#25643); +#25643 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#25644 = VERTEX_POINT('',#25645); +#25645 = CARTESIAN_POINT('',(-0.925,-1.05,0.)); +#25646 = LINE('',#25647,#25648); +#25647 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#25648 = VECTOR('',#25649,1.); +#25649 = DIRECTION('',(1.,0.,0.)); +#25650 = ORIENTED_EDGE('',*,*,#25651,.T.); +#25651 = EDGE_CURVE('',#25642,#25652,#25654,.T.); +#25652 = VERTEX_POINT('',#25653); +#25653 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#25654 = LINE('',#25655,#25656); +#25655 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#25656 = VECTOR('',#25657,1.); +#25657 = DIRECTION('',(0.,0.,1.)); +#25658 = ORIENTED_EDGE('',*,*,#25659,.T.); +#25659 = EDGE_CURVE('',#25652,#25660,#25662,.T.); +#25660 = VERTEX_POINT('',#25661); +#25661 = CARTESIAN_POINT('',(-1.225,-1.05,0.6)); +#25662 = LINE('',#25663,#25664); +#25663 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#25664 = VECTOR('',#25665,1.); +#25665 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#25666 = ORIENTED_EDGE('',*,*,#25667,.F.); +#25667 = EDGE_CURVE('',#25668,#25660,#25670,.T.); +#25668 = VERTEX_POINT('',#25669); +#25669 = CARTESIAN_POINT('',(-1.225,-1.05,1.08)); +#25670 = LINE('',#25671,#25672); +#25671 = CARTESIAN_POINT('',(-1.225,-1.05,1.08)); +#25672 = VECTOR('',#25673,1.); +#25673 = DIRECTION('',(0.,0.,-1.)); +#25674 = ORIENTED_EDGE('',*,*,#25675,.T.); +#25675 = EDGE_CURVE('',#25668,#25676,#25678,.T.); +#25676 = VERTEX_POINT('',#25677); +#25677 = CARTESIAN_POINT('',(1.225,-1.05,1.08)); +#25678 = LINE('',#25679,#25680); +#25679 = CARTESIAN_POINT('',(-1.5,-1.05,1.08)); +#25680 = VECTOR('',#25681,1.); +#25681 = DIRECTION('',(1.,0.,0.)); +#25682 = ORIENTED_EDGE('',*,*,#25683,.T.); +#25683 = EDGE_CURVE('',#25676,#25684,#25686,.T.); +#25684 = VERTEX_POINT('',#25685); +#25685 = CARTESIAN_POINT('',(1.225,-1.05,0.6)); +#25686 = LINE('',#25687,#25688); +#25687 = CARTESIAN_POINT('',(1.225,-1.05,1.08)); +#25688 = VECTOR('',#25689,1.); +#25689 = DIRECTION('',(0.,0.,-1.)); +#25690 = ORIENTED_EDGE('',*,*,#25691,.F.); +#25691 = EDGE_CURVE('',#25692,#25684,#25694,.T.); +#25692 = VERTEX_POINT('',#25693); +#25693 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#25694 = LINE('',#25695,#25696); +#25695 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#25696 = VECTOR('',#25697,1.); +#25697 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#25698 = ORIENTED_EDGE('',*,*,#25699,.F.); +#25699 = EDGE_CURVE('',#25700,#25692,#25702,.T.); +#25700 = VERTEX_POINT('',#25701); +#25701 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#25702 = LINE('',#25703,#25704); +#25703 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#25704 = VECTOR('',#25705,1.); +#25705 = DIRECTION('',(0.,0.,1.)); +#25706 = ORIENTED_EDGE('',*,*,#25707,.F.); +#25707 = EDGE_CURVE('',#25708,#25700,#25710,.T.); +#25708 = VERTEX_POINT('',#25709); +#25709 = CARTESIAN_POINT('',(0.925,-1.05,0.)); +#25710 = LINE('',#25711,#25712); +#25711 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#25712 = VECTOR('',#25713,1.); +#25713 = DIRECTION('',(1.,0.,0.)); +#25714 = ORIENTED_EDGE('',*,*,#25715,.T.); +#25715 = EDGE_CURVE('',#25708,#25716,#25718,.T.); +#25716 = VERTEX_POINT('',#25717); +#25717 = CARTESIAN_POINT('',(0.925,-1.05,0.6)); +#25718 = LINE('',#25719,#25720); +#25719 = CARTESIAN_POINT('',(0.925,-1.05,0.)); +#25720 = VECTOR('',#25721,1.); +#25721 = DIRECTION('',(0.,0.,1.)); +#25722 = ORIENTED_EDGE('',*,*,#25723,.F.); +#25723 = EDGE_CURVE('',#25724,#25716,#25726,.T.); +#25724 = VERTEX_POINT('',#25725); +#25725 = CARTESIAN_POINT('',(-0.925,-1.05,0.6)); +#25726 = LINE('',#25727,#25728); +#25727 = CARTESIAN_POINT('',(-0.925,-1.05,0.6)); +#25728 = VECTOR('',#25729,1.); +#25729 = DIRECTION('',(1.,0.,0.)); +#25730 = ORIENTED_EDGE('',*,*,#25731,.F.); +#25731 = EDGE_CURVE('',#25644,#25724,#25732,.T.); +#25732 = LINE('',#25733,#25734); +#25733 = CARTESIAN_POINT('',(-0.925,-1.05,0.)); +#25734 = VECTOR('',#25735,1.); +#25735 = DIRECTION('',(0.,0.,1.)); +#25736 = PLANE('',#25737); +#25737 = AXIS2_PLACEMENT_3D('',#25738,#25739,#25740); +#25738 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#25739 = DIRECTION('',(0.,1.,0.)); +#25740 = DIRECTION('',(1.,0.,0.)); +#25741 = ADVANCED_FACE('',(#25742),#25886,.F.); +#25742 = FACE_BOUND('',#25743,.F.); +#25743 = EDGE_LOOP('',(#25744,#25754,#25760,#25761,#25769,#25777,#25783, + #25784,#25792,#25800,#25808,#25816,#25824,#25832,#25840,#25848, + #25856,#25864,#25872,#25880)); +#25744 = ORIENTED_EDGE('',*,*,#25745,.F.); +#25745 = EDGE_CURVE('',#25746,#25748,#25750,.T.); +#25746 = VERTEX_POINT('',#25747); +#25747 = CARTESIAN_POINT('',(-1.5,-0.7,0.)); +#25748 = VERTEX_POINT('',#25749); +#25749 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#25750 = LINE('',#25751,#25752); +#25751 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#25752 = VECTOR('',#25753,1.); +#25753 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#25754 = ORIENTED_EDGE('',*,*,#25755,.T.); +#25755 = EDGE_CURVE('',#25746,#25642,#25756,.T.); +#25756 = LINE('',#25757,#25758); +#25757 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#25758 = VECTOR('',#25759,1.); +#25759 = DIRECTION('',(0.,-1.,0.)); +#25760 = ORIENTED_EDGE('',*,*,#25641,.T.); +#25761 = ORIENTED_EDGE('',*,*,#25762,.F.); +#25762 = EDGE_CURVE('',#25763,#25644,#25765,.T.); +#25763 = VERTEX_POINT('',#25764); +#25764 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#25765 = LINE('',#25766,#25767); +#25766 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#25767 = VECTOR('',#25768,1.); +#25768 = DIRECTION('',(0.,1.,0.)); +#25769 = ORIENTED_EDGE('',*,*,#25770,.T.); +#25770 = EDGE_CURVE('',#25763,#25771,#25773,.T.); +#25771 = VERTEX_POINT('',#25772); +#25772 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#25773 = LINE('',#25774,#25775); +#25774 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#25775 = VECTOR('',#25776,1.); +#25776 = DIRECTION('',(1.,0.,0.)); +#25777 = ORIENTED_EDGE('',*,*,#25778,.T.); +#25778 = EDGE_CURVE('',#25771,#25708,#25779,.T.); +#25779 = LINE('',#25780,#25781); +#25780 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#25781 = VECTOR('',#25782,1.); +#25782 = DIRECTION('',(0.,1.,0.)); +#25783 = ORIENTED_EDGE('',*,*,#25707,.T.); +#25784 = ORIENTED_EDGE('',*,*,#25785,.T.); +#25785 = EDGE_CURVE('',#25700,#25786,#25788,.T.); +#25786 = VERTEX_POINT('',#25787); +#25787 = CARTESIAN_POINT('',(1.5,-0.7,0.)); +#25788 = LINE('',#25789,#25790); +#25789 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#25790 = VECTOR('',#25791,1.); +#25791 = DIRECTION('',(0.,1.,0.)); +#25792 = ORIENTED_EDGE('',*,*,#25793,.F.); +#25793 = EDGE_CURVE('',#25794,#25786,#25796,.T.); +#25794 = VERTEX_POINT('',#25795); +#25795 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#25796 = LINE('',#25797,#25798); +#25797 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#25798 = VECTOR('',#25799,1.); +#25799 = DIRECTION('',(1.,0.,0.)); +#25800 = ORIENTED_EDGE('',*,*,#25801,.F.); +#25801 = EDGE_CURVE('',#25802,#25794,#25804,.T.); +#25802 = VERTEX_POINT('',#25803); +#25803 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#25804 = LINE('',#25805,#25806); +#25805 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#25806 = VECTOR('',#25807,1.); +#25807 = DIRECTION('',(0.,-1.,0.)); +#25808 = ORIENTED_EDGE('',*,*,#25809,.F.); +#25809 = EDGE_CURVE('',#25810,#25802,#25812,.T.); +#25810 = VERTEX_POINT('',#25811); +#25811 = CARTESIAN_POINT('',(1.5,0.7,0.)); +#25812 = LINE('',#25813,#25814); +#25813 = CARTESIAN_POINT('',(2.,0.7,0.)); +#25814 = VECTOR('',#25815,1.); +#25815 = DIRECTION('',(-1.,0.,0.)); +#25816 = ORIENTED_EDGE('',*,*,#25817,.T.); +#25817 = EDGE_CURVE('',#25810,#25818,#25820,.T.); +#25818 = VERTEX_POINT('',#25819); +#25819 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#25820 = LINE('',#25821,#25822); +#25821 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#25822 = VECTOR('',#25823,1.); +#25823 = DIRECTION('',(0.,1.,0.)); +#25824 = ORIENTED_EDGE('',*,*,#25825,.T.); +#25825 = EDGE_CURVE('',#25818,#25826,#25828,.T.); +#25826 = VERTEX_POINT('',#25827); +#25827 = CARTESIAN_POINT('',(0.925,1.05,0.)); +#25828 = LINE('',#25829,#25830); +#25829 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#25830 = VECTOR('',#25831,1.); +#25831 = DIRECTION('',(-1.,0.,0.)); +#25832 = ORIENTED_EDGE('',*,*,#25833,.T.); +#25833 = EDGE_CURVE('',#25826,#25834,#25836,.T.); +#25834 = VERTEX_POINT('',#25835); +#25835 = CARTESIAN_POINT('',(0.925,1.25,0.)); +#25836 = LINE('',#25837,#25838); +#25837 = CARTESIAN_POINT('',(0.925,1.05,0.)); +#25838 = VECTOR('',#25839,1.); +#25839 = DIRECTION('',(0.,1.,0.)); +#25840 = ORIENTED_EDGE('',*,*,#25841,.F.); +#25841 = EDGE_CURVE('',#25842,#25834,#25844,.T.); +#25842 = VERTEX_POINT('',#25843); +#25843 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#25844 = LINE('',#25845,#25846); +#25845 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#25846 = VECTOR('',#25847,1.); +#25847 = DIRECTION('',(1.,0.,0.)); +#25848 = ORIENTED_EDGE('',*,*,#25849,.F.); +#25849 = EDGE_CURVE('',#25850,#25842,#25852,.T.); +#25850 = VERTEX_POINT('',#25851); +#25851 = CARTESIAN_POINT('',(-0.925,1.05,0.)); +#25852 = LINE('',#25853,#25854); +#25853 = CARTESIAN_POINT('',(-0.925,1.05,0.)); +#25854 = VECTOR('',#25855,1.); +#25855 = DIRECTION('',(0.,1.,0.)); +#25856 = ORIENTED_EDGE('',*,*,#25857,.T.); +#25857 = EDGE_CURVE('',#25850,#25858,#25860,.T.); +#25858 = VERTEX_POINT('',#25859); +#25859 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#25860 = LINE('',#25861,#25862); +#25861 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#25862 = VECTOR('',#25863,1.); +#25863 = DIRECTION('',(-1.,0.,0.)); +#25864 = ORIENTED_EDGE('',*,*,#25865,.T.); +#25865 = EDGE_CURVE('',#25858,#25866,#25868,.T.); +#25866 = VERTEX_POINT('',#25867); +#25867 = CARTESIAN_POINT('',(-1.5,0.7,0.)); +#25868 = LINE('',#25869,#25870); +#25869 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#25870 = VECTOR('',#25871,1.); +#25871 = DIRECTION('',(0.,-1.,0.)); +#25872 = ORIENTED_EDGE('',*,*,#25873,.F.); +#25873 = EDGE_CURVE('',#25874,#25866,#25876,.T.); +#25874 = VERTEX_POINT('',#25875); +#25875 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#25876 = LINE('',#25877,#25878); +#25877 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#25878 = VECTOR('',#25879,1.); +#25879 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#25880 = ORIENTED_EDGE('',*,*,#25881,.F.); +#25881 = EDGE_CURVE('',#25748,#25874,#25882,.T.); +#25882 = LINE('',#25883,#25884); +#25883 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#25884 = VECTOR('',#25885,1.); +#25885 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#25886 = PLANE('',#25887); +#25887 = AXIS2_PLACEMENT_3D('',#25888,#25889,#25890); +#25888 = CARTESIAN_POINT('',(0.,0.,0.)); +#25889 = DIRECTION('',(0.,0.,1.)); +#25890 = DIRECTION('',(1.,0.,-0.)); +#25891 = ADVANCED_FACE('',(#25892),#25926,.F.); +#25892 = FACE_BOUND('',#25893,.F.); +#25893 = EDGE_LOOP('',(#25894,#25902,#25903,#25904,#25912,#25920)); +#25894 = ORIENTED_EDGE('',*,*,#25895,.F.); +#25895 = EDGE_CURVE('',#25763,#25896,#25898,.T.); +#25896 = VERTEX_POINT('',#25897); +#25897 = CARTESIAN_POINT('',(-0.925,-1.25,0.1)); +#25898 = LINE('',#25899,#25900); +#25899 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#25900 = VECTOR('',#25901,1.); +#25901 = DIRECTION('',(0.,0.,1.)); +#25902 = ORIENTED_EDGE('',*,*,#25762,.T.); +#25903 = ORIENTED_EDGE('',*,*,#25731,.T.); +#25904 = ORIENTED_EDGE('',*,*,#25905,.F.); +#25905 = EDGE_CURVE('',#25906,#25724,#25908,.T.); +#25906 = VERTEX_POINT('',#25907); +#25907 = CARTESIAN_POINT('',(-0.925,-1.13,0.6)); +#25908 = LINE('',#25909,#25910); +#25909 = CARTESIAN_POINT('',(-0.925,-1.25,0.6)); +#25910 = VECTOR('',#25911,1.); +#25911 = DIRECTION('',(0.,1.,0.)); +#25912 = ORIENTED_EDGE('',*,*,#25913,.F.); +#25913 = EDGE_CURVE('',#25914,#25906,#25916,.T.); +#25914 = VERTEX_POINT('',#25915); +#25915 = CARTESIAN_POINT('',(-0.925,-1.13,0.1)); +#25916 = LINE('',#25917,#25918); +#25917 = CARTESIAN_POINT('',(-0.925,-1.13,0.1)); +#25918 = VECTOR('',#25919,1.); +#25919 = DIRECTION('',(0.,0.,1.)); +#25920 = ORIENTED_EDGE('',*,*,#25921,.T.); +#25921 = EDGE_CURVE('',#25914,#25896,#25922,.T.); +#25922 = LINE('',#25923,#25924); +#25923 = CARTESIAN_POINT('',(-0.925,-1.13,0.1)); +#25924 = VECTOR('',#25925,1.); +#25925 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#25926 = PLANE('',#25927); +#25927 = AXIS2_PLACEMENT_3D('',#25928,#25929,#25930); +#25928 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#25929 = DIRECTION('',(1.,0.,0.)); +#25930 = DIRECTION('',(0.,0.,1.)); +#25931 = ADVANCED_FACE('',(#25932),#25950,.T.); +#25932 = FACE_BOUND('',#25933,.T.); +#25933 = EDGE_LOOP('',(#25934,#25935,#25943,#25949)); +#25934 = ORIENTED_EDGE('',*,*,#25905,.F.); +#25935 = ORIENTED_EDGE('',*,*,#25936,.F.); +#25936 = EDGE_CURVE('',#25937,#25906,#25939,.T.); +#25937 = VERTEX_POINT('',#25938); +#25938 = CARTESIAN_POINT('',(0.925,-1.13,0.6)); +#25939 = LINE('',#25940,#25941); +#25940 = CARTESIAN_POINT('',(0.925,-1.13,0.6)); +#25941 = VECTOR('',#25942,1.); +#25942 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#25943 = ORIENTED_EDGE('',*,*,#25944,.T.); +#25944 = EDGE_CURVE('',#25937,#25716,#25945,.T.); +#25945 = LINE('',#25946,#25947); +#25946 = CARTESIAN_POINT('',(0.925,-1.25,0.6)); +#25947 = VECTOR('',#25948,1.); +#25948 = DIRECTION('',(0.,1.,0.)); +#25949 = ORIENTED_EDGE('',*,*,#25723,.F.); +#25950 = PLANE('',#25951); +#25951 = AXIS2_PLACEMENT_3D('',#25952,#25953,#25954); +#25952 = CARTESIAN_POINT('',(-0.925,-1.25,0.6)); +#25953 = DIRECTION('',(0.,0.,1.)); +#25954 = DIRECTION('',(1.,0.,-0.)); +#25955 = ADVANCED_FACE('',(#25956),#25983,.T.); +#25956 = FACE_BOUND('',#25957,.T.); +#25957 = EDGE_LOOP('',(#25958,#25966,#25967,#25968,#25969,#25977)); +#25958 = ORIENTED_EDGE('',*,*,#25959,.F.); +#25959 = EDGE_CURVE('',#25771,#25960,#25962,.T.); +#25960 = VERTEX_POINT('',#25961); +#25961 = CARTESIAN_POINT('',(0.925,-1.25,0.1)); +#25962 = LINE('',#25963,#25964); +#25963 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#25964 = VECTOR('',#25965,1.); +#25965 = DIRECTION('',(0.,0.,1.)); +#25966 = ORIENTED_EDGE('',*,*,#25778,.T.); +#25967 = ORIENTED_EDGE('',*,*,#25715,.T.); +#25968 = ORIENTED_EDGE('',*,*,#25944,.F.); +#25969 = ORIENTED_EDGE('',*,*,#25970,.F.); +#25970 = EDGE_CURVE('',#25971,#25937,#25973,.T.); +#25971 = VERTEX_POINT('',#25972); +#25972 = CARTESIAN_POINT('',(0.925,-1.13,0.1)); +#25973 = LINE('',#25974,#25975); +#25974 = CARTESIAN_POINT('',(0.925,-1.13,0.1)); +#25975 = VECTOR('',#25976,1.); +#25976 = DIRECTION('',(0.,0.,1.)); +#25977 = ORIENTED_EDGE('',*,*,#25978,.T.); +#25978 = EDGE_CURVE('',#25971,#25960,#25979,.T.); +#25979 = LINE('',#25980,#25981); +#25980 = CARTESIAN_POINT('',(0.925,-1.13,0.1)); +#25981 = VECTOR('',#25982,1.); +#25982 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#25983 = PLANE('',#25984); +#25984 = AXIS2_PLACEMENT_3D('',#25985,#25986,#25987); +#25985 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#25986 = DIRECTION('',(1.,0.,0.)); +#25987 = DIRECTION('',(0.,0.,1.)); +#25988 = ADVANCED_FACE('',(#25989),#26110,.F.); +#25989 = FACE_BOUND('',#25990,.F.); +#25990 = EDGE_LOOP('',(#25991,#25992,#25993,#26001,#26009,#26017,#26025, + #26033,#26041,#26049,#26057,#26065,#26073,#26081,#26087,#26088, + #26096,#26104)); +#25991 = ORIENTED_EDGE('',*,*,#25785,.F.); +#25992 = ORIENTED_EDGE('',*,*,#25699,.T.); +#25993 = ORIENTED_EDGE('',*,*,#25994,.T.); +#25994 = EDGE_CURVE('',#25692,#25995,#25997,.T.); +#25995 = VERTEX_POINT('',#25996); +#25996 = CARTESIAN_POINT('',(1.5,-1.13,0.6)); +#25997 = LINE('',#25998,#25999); +#25998 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#25999 = VECTOR('',#26000,1.); +#26000 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26001 = ORIENTED_EDGE('',*,*,#26002,.T.); +#26002 = EDGE_CURVE('',#25995,#26003,#26005,.T.); +#26003 = VERTEX_POINT('',#26004); +#26004 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#26005 = LINE('',#26006,#26007); +#26006 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#26007 = VECTOR('',#26008,1.); +#26008 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26009 = ORIENTED_EDGE('',*,*,#26010,.T.); +#26010 = EDGE_CURVE('',#26003,#26011,#26013,.T.); +#26011 = VERTEX_POINT('',#26012); +#26012 = CARTESIAN_POINT('',(1.5,-1.25,0.63)); +#26013 = LINE('',#26014,#26015); +#26014 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#26015 = VECTOR('',#26016,1.); +#26016 = DIRECTION('',(0.,0.,1.)); +#26017 = ORIENTED_EDGE('',*,*,#26018,.T.); +#26018 = EDGE_CURVE('',#26011,#26019,#26021,.T.); +#26019 = VERTEX_POINT('',#26020); +#26020 = CARTESIAN_POINT('',(1.5,-1.1,1.08)); +#26021 = LINE('',#26022,#26023); +#26022 = CARTESIAN_POINT('',(1.5,-1.25,0.63)); +#26023 = VECTOR('',#26024,1.); +#26024 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#26025 = ORIENTED_EDGE('',*,*,#26026,.F.); +#26026 = EDGE_CURVE('',#26027,#26019,#26029,.T.); +#26027 = VERTEX_POINT('',#26028); +#26028 = CARTESIAN_POINT('',(1.5,-1.,1.08)); +#26029 = LINE('',#26030,#26031); +#26030 = CARTESIAN_POINT('',(1.5,1.1,1.08)); +#26031 = VECTOR('',#26032,1.); +#26032 = DIRECTION('',(-2.0185873175E-16,-1.,0.)); +#26033 = ORIENTED_EDGE('',*,*,#26034,.T.); +#26034 = EDGE_CURVE('',#26027,#26035,#26037,.T.); +#26035 = VERTEX_POINT('',#26036); +#26036 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#26037 = LINE('',#26038,#26039); +#26038 = CARTESIAN_POINT('',(1.5,-1.,1.08)); +#26039 = VECTOR('',#26040,1.); +#26040 = DIRECTION('',(0.,1.,0.)); +#26041 = ORIENTED_EDGE('',*,*,#26042,.F.); +#26042 = EDGE_CURVE('',#26043,#26035,#26045,.T.); +#26043 = VERTEX_POINT('',#26044); +#26044 = CARTESIAN_POINT('',(1.5,1.1,1.08)); +#26045 = LINE('',#26046,#26047); +#26046 = CARTESIAN_POINT('',(1.5,1.1,1.08)); +#26047 = VECTOR('',#26048,1.); +#26048 = DIRECTION('',(-2.0185873175E-16,-1.,0.)); +#26049 = ORIENTED_EDGE('',*,*,#26050,.F.); +#26050 = EDGE_CURVE('',#26051,#26043,#26053,.T.); +#26051 = VERTEX_POINT('',#26052); +#26052 = CARTESIAN_POINT('',(1.5,1.25,0.63)); +#26053 = LINE('',#26054,#26055); +#26054 = CARTESIAN_POINT('',(1.5,1.25,0.63)); +#26055 = VECTOR('',#26056,1.); +#26056 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#26057 = ORIENTED_EDGE('',*,*,#26058,.F.); +#26058 = EDGE_CURVE('',#26059,#26051,#26061,.T.); +#26059 = VERTEX_POINT('',#26060); +#26060 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#26061 = LINE('',#26062,#26063); +#26062 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#26063 = VECTOR('',#26064,1.); +#26064 = DIRECTION('',(0.,0.,1.)); +#26065 = ORIENTED_EDGE('',*,*,#26066,.F.); +#26066 = EDGE_CURVE('',#26067,#26059,#26069,.T.); +#26067 = VERTEX_POINT('',#26068); +#26068 = CARTESIAN_POINT('',(1.5,1.13,0.6)); +#26069 = LINE('',#26070,#26071); +#26070 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#26071 = VECTOR('',#26072,1.); +#26072 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26073 = ORIENTED_EDGE('',*,*,#26074,.F.); +#26074 = EDGE_CURVE('',#26075,#26067,#26077,.T.); +#26075 = VERTEX_POINT('',#26076); +#26076 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#26077 = LINE('',#26078,#26079); +#26078 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#26079 = VECTOR('',#26080,1.); +#26080 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26081 = ORIENTED_EDGE('',*,*,#26082,.F.); +#26082 = EDGE_CURVE('',#25818,#26075,#26083,.T.); +#26083 = LINE('',#26084,#26085); +#26084 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#26085 = VECTOR('',#26086,1.); +#26086 = DIRECTION('',(0.,0.,1.)); +#26087 = ORIENTED_EDGE('',*,*,#25817,.F.); +#26088 = ORIENTED_EDGE('',*,*,#26089,.T.); +#26089 = EDGE_CURVE('',#25810,#26090,#26092,.T.); +#26090 = VERTEX_POINT('',#26091); +#26091 = CARTESIAN_POINT('',(1.5,0.7,0.1)); +#26092 = LINE('',#26093,#26094); +#26093 = CARTESIAN_POINT('',(1.5,0.7,0.)); +#26094 = VECTOR('',#26095,1.); +#26095 = DIRECTION('',(0.,0.,1.)); +#26096 = ORIENTED_EDGE('',*,*,#26097,.F.); +#26097 = EDGE_CURVE('',#26098,#26090,#26100,.T.); +#26098 = VERTEX_POINT('',#26099); +#26099 = CARTESIAN_POINT('',(1.5,-0.7,0.1)); +#26100 = LINE('',#26101,#26102); +#26101 = CARTESIAN_POINT('',(1.5,-0.525,0.1)); +#26102 = VECTOR('',#26103,1.); +#26103 = DIRECTION('',(0.,1.,0.)); +#26104 = ORIENTED_EDGE('',*,*,#26105,.T.); +#26105 = EDGE_CURVE('',#26098,#25786,#26106,.T.); +#26106 = LINE('',#26107,#26108); +#26107 = CARTESIAN_POINT('',(1.5,-0.7,0.)); +#26108 = VECTOR('',#26109,1.); +#26109 = DIRECTION('',(0.,0.,-1.)); +#26110 = PLANE('',#26111); +#26111 = AXIS2_PLACEMENT_3D('',#26112,#26113,#26114); +#26112 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#26113 = DIRECTION('',(-1.,0.,0.)); +#26114 = DIRECTION('',(0.,1.,0.)); +#26115 = ADVANCED_FACE('',(#26116),#26134,.F.); +#26116 = FACE_BOUND('',#26117,.F.); +#26117 = EDGE_LOOP('',(#26118,#26119,#26120,#26128)); +#26118 = ORIENTED_EDGE('',*,*,#25994,.F.); +#26119 = ORIENTED_EDGE('',*,*,#25691,.T.); +#26120 = ORIENTED_EDGE('',*,*,#26121,.T.); +#26121 = EDGE_CURVE('',#25684,#26122,#26124,.T.); +#26122 = VERTEX_POINT('',#26123); +#26123 = CARTESIAN_POINT('',(1.225,-1.13,0.6)); +#26124 = LINE('',#26125,#26126); +#26125 = CARTESIAN_POINT('',(1.225,-1.05,0.6)); +#26126 = VECTOR('',#26127,1.); +#26127 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26128 = ORIENTED_EDGE('',*,*,#26129,.T.); +#26129 = EDGE_CURVE('',#26122,#25995,#26130,.T.); +#26130 = LINE('',#26131,#26132); +#26131 = CARTESIAN_POINT('',(1.225,-1.13,0.6)); +#26132 = VECTOR('',#26133,1.); +#26133 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#26134 = PLANE('',#26135); +#26135 = AXIS2_PLACEMENT_3D('',#26136,#26137,#26138); +#26136 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#26137 = DIRECTION('',(0.,0.,1.)); +#26138 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26139 = ADVANCED_FACE('',(#26140),#26166,.T.); +#26140 = FACE_BOUND('',#26141,.T.); +#26141 = EDGE_LOOP('',(#26142,#26143,#26144,#26152,#26160)); +#26142 = ORIENTED_EDGE('',*,*,#25683,.T.); +#26143 = ORIENTED_EDGE('',*,*,#26121,.T.); +#26144 = ORIENTED_EDGE('',*,*,#26145,.F.); +#26145 = EDGE_CURVE('',#26146,#26122,#26148,.T.); +#26146 = VERTEX_POINT('',#26147); +#26147 = CARTESIAN_POINT('',(1.225,-1.13,0.99)); +#26148 = LINE('',#26149,#26150); +#26149 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#26150 = VECTOR('',#26151,1.); +#26151 = DIRECTION('',(0.,0.,-1.)); +#26152 = ORIENTED_EDGE('',*,*,#26153,.T.); +#26153 = EDGE_CURVE('',#26146,#26154,#26156,.T.); +#26154 = VERTEX_POINT('',#26155); +#26155 = CARTESIAN_POINT('',(1.225,-1.1,1.08)); +#26156 = LINE('',#26157,#26158); +#26157 = CARTESIAN_POINT('',(1.225,-1.25,0.63)); +#26158 = VECTOR('',#26159,1.); +#26159 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#26160 = ORIENTED_EDGE('',*,*,#26161,.T.); +#26161 = EDGE_CURVE('',#26154,#25676,#26162,.T.); +#26162 = LINE('',#26163,#26164); +#26163 = CARTESIAN_POINT('',(1.225,-1.1,1.08)); +#26164 = VECTOR('',#26165,1.); +#26165 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#26166 = PLANE('',#26167); +#26167 = AXIS2_PLACEMENT_3D('',#26168,#26169,#26170); +#26168 = CARTESIAN_POINT('',(1.225,-1.120112441071,0.81113046028)); +#26169 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#26170 = DIRECTION('',(0.,0.,-1.)); +#26171 = ADVANCED_FACE('',(#26172),#26206,.F.); +#26172 = FACE_BOUND('',#26173,.F.); +#26173 = EDGE_LOOP('',(#26174,#26175,#26183,#26191,#26199,#26205)); +#26174 = ORIENTED_EDGE('',*,*,#25675,.F.); +#26175 = ORIENTED_EDGE('',*,*,#26176,.F.); +#26176 = EDGE_CURVE('',#26177,#25668,#26179,.T.); +#26177 = VERTEX_POINT('',#26178); +#26178 = CARTESIAN_POINT('',(-1.225,-1.1,1.08)); +#26179 = LINE('',#26180,#26181); +#26180 = CARTESIAN_POINT('',(-1.225,-1.1,1.08)); +#26181 = VECTOR('',#26182,1.); +#26182 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#26183 = ORIENTED_EDGE('',*,*,#26184,.F.); +#26184 = EDGE_CURVE('',#26185,#26177,#26187,.T.); +#26185 = VERTEX_POINT('',#26186); +#26186 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#26187 = LINE('',#26188,#26189); +#26188 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#26189 = VECTOR('',#26190,1.); +#26190 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#26191 = ORIENTED_EDGE('',*,*,#26192,.T.); +#26192 = EDGE_CURVE('',#26185,#26193,#26195,.T.); +#26193 = VERTEX_POINT('',#26194); +#26194 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#26195 = LINE('',#26196,#26197); +#26196 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#26197 = VECTOR('',#26198,1.); +#26198 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#26199 = ORIENTED_EDGE('',*,*,#26200,.T.); +#26200 = EDGE_CURVE('',#26193,#26154,#26201,.T.); +#26201 = LINE('',#26202,#26203); +#26202 = CARTESIAN_POINT('',(1.225,-1.25,1.08)); +#26203 = VECTOR('',#26204,1.); +#26204 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#26205 = ORIENTED_EDGE('',*,*,#26161,.T.); +#26206 = PLANE('',#26207); +#26207 = AXIS2_PLACEMENT_3D('',#26208,#26209,#26210); +#26208 = CARTESIAN_POINT('',(0.,0.,1.08)); +#26209 = DIRECTION('',(0.,0.,1.)); +#26210 = DIRECTION('',(1.,0.,-0.)); +#26211 = ADVANCED_FACE('',(#26212),#26238,.T.); +#26212 = FACE_BOUND('',#26213,.F.); +#26213 = EDGE_LOOP('',(#26214,#26215,#26223,#26231,#26237)); +#26214 = ORIENTED_EDGE('',*,*,#25667,.T.); +#26215 = ORIENTED_EDGE('',*,*,#26216,.T.); +#26216 = EDGE_CURVE('',#25660,#26217,#26219,.T.); +#26217 = VERTEX_POINT('',#26218); +#26218 = CARTESIAN_POINT('',(-1.225,-1.13,0.6)); +#26219 = LINE('',#26220,#26221); +#26220 = CARTESIAN_POINT('',(-1.225,-1.05,0.6)); +#26221 = VECTOR('',#26222,1.); +#26222 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26223 = ORIENTED_EDGE('',*,*,#26224,.F.); +#26224 = EDGE_CURVE('',#26225,#26217,#26227,.T.); +#26225 = VERTEX_POINT('',#26226); +#26226 = CARTESIAN_POINT('',(-1.225,-1.13,0.99)); +#26227 = LINE('',#26228,#26229); +#26228 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#26229 = VECTOR('',#26230,1.); +#26230 = DIRECTION('',(0.,0.,-1.)); +#26231 = ORIENTED_EDGE('',*,*,#26232,.T.); +#26232 = EDGE_CURVE('',#26225,#26177,#26233,.T.); +#26233 = LINE('',#26234,#26235); +#26234 = CARTESIAN_POINT('',(-1.225,-1.25,0.63)); +#26235 = VECTOR('',#26236,1.); +#26236 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#26237 = ORIENTED_EDGE('',*,*,#26176,.T.); +#26238 = PLANE('',#26239); +#26239 = AXIS2_PLACEMENT_3D('',#26240,#26241,#26242); +#26240 = CARTESIAN_POINT('',(-1.225,-1.120112441071,0.81113046028)); +#26241 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#26242 = DIRECTION('',(0.,0.,1.)); +#26243 = ADVANCED_FACE('',(#26244),#26262,.F.); +#26244 = FACE_BOUND('',#26245,.T.); +#26245 = EDGE_LOOP('',(#26246,#26254,#26255,#26256)); +#26246 = ORIENTED_EDGE('',*,*,#26247,.F.); +#26247 = EDGE_CURVE('',#25652,#26248,#26250,.T.); +#26248 = VERTEX_POINT('',#26249); +#26249 = CARTESIAN_POINT('',(-1.5,-1.13,0.6)); +#26250 = LINE('',#26251,#26252); +#26251 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#26252 = VECTOR('',#26253,1.); +#26253 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26254 = ORIENTED_EDGE('',*,*,#25659,.T.); +#26255 = ORIENTED_EDGE('',*,*,#26216,.T.); +#26256 = ORIENTED_EDGE('',*,*,#26257,.T.); +#26257 = EDGE_CURVE('',#26217,#26248,#26258,.T.); +#26258 = LINE('',#26259,#26260); +#26259 = CARTESIAN_POINT('',(-1.225,-1.13,0.6)); +#26260 = VECTOR('',#26261,1.); +#26261 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#26262 = PLANE('',#26263); +#26263 = AXIS2_PLACEMENT_3D('',#26264,#26265,#26266); +#26264 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#26265 = DIRECTION('',(0.,0.,1.)); +#26266 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#26267 = ADVANCED_FACE('',(#26268),#26382,.F.); +#26268 = FACE_BOUND('',#26269,.F.); +#26269 = EDGE_LOOP('',(#26270,#26271,#26279,#26287,#26295,#26303,#26311, + #26319,#26327,#26335,#26343,#26351,#26357,#26358,#26359,#26360, + #26368,#26376)); +#26270 = ORIENTED_EDGE('',*,*,#25865,.F.); +#26271 = ORIENTED_EDGE('',*,*,#26272,.T.); +#26272 = EDGE_CURVE('',#25858,#26273,#26275,.T.); +#26273 = VERTEX_POINT('',#26274); +#26274 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#26275 = LINE('',#26276,#26277); +#26276 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#26277 = VECTOR('',#26278,1.); +#26278 = DIRECTION('',(0.,0.,1.)); +#26279 = ORIENTED_EDGE('',*,*,#26280,.T.); +#26280 = EDGE_CURVE('',#26273,#26281,#26283,.T.); +#26281 = VERTEX_POINT('',#26282); +#26282 = CARTESIAN_POINT('',(-1.5,1.13,0.6)); +#26283 = LINE('',#26284,#26285); +#26284 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#26285 = VECTOR('',#26286,1.); +#26286 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26287 = ORIENTED_EDGE('',*,*,#26288,.T.); +#26288 = EDGE_CURVE('',#26281,#26289,#26291,.T.); +#26289 = VERTEX_POINT('',#26290); +#26290 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#26291 = LINE('',#26292,#26293); +#26292 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#26293 = VECTOR('',#26294,1.); +#26294 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26295 = ORIENTED_EDGE('',*,*,#26296,.T.); +#26296 = EDGE_CURVE('',#26289,#26297,#26299,.T.); +#26297 = VERTEX_POINT('',#26298); +#26298 = CARTESIAN_POINT('',(-1.5,1.25,0.63)); +#26299 = LINE('',#26300,#26301); +#26300 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#26301 = VECTOR('',#26302,1.); +#26302 = DIRECTION('',(0.,0.,1.)); +#26303 = ORIENTED_EDGE('',*,*,#26304,.T.); +#26304 = EDGE_CURVE('',#26297,#26305,#26307,.T.); +#26305 = VERTEX_POINT('',#26306); +#26306 = CARTESIAN_POINT('',(-1.5,1.1,1.08)); +#26307 = LINE('',#26308,#26309); +#26308 = CARTESIAN_POINT('',(-1.5,1.25,0.63)); +#26309 = VECTOR('',#26310,1.); +#26310 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#26311 = ORIENTED_EDGE('',*,*,#26312,.T.); +#26312 = EDGE_CURVE('',#26305,#26313,#26315,.T.); +#26313 = VERTEX_POINT('',#26314); +#26314 = CARTESIAN_POINT('',(-1.5,1.,1.08)); +#26315 = LINE('',#26316,#26317); +#26316 = CARTESIAN_POINT('',(-1.5,1.1,1.08)); +#26317 = VECTOR('',#26318,1.); +#26318 = DIRECTION('',(-2.0185873175E-16,-1.,0.)); +#26319 = ORIENTED_EDGE('',*,*,#26320,.T.); +#26320 = EDGE_CURVE('',#26313,#26321,#26323,.T.); +#26321 = VERTEX_POINT('',#26322); +#26322 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#26323 = LINE('',#26324,#26325); +#26324 = CARTESIAN_POINT('',(-1.5,1.,1.08)); +#26325 = VECTOR('',#26326,1.); +#26326 = DIRECTION('',(0.,-1.,0.)); +#26327 = ORIENTED_EDGE('',*,*,#26328,.T.); +#26328 = EDGE_CURVE('',#26321,#26329,#26331,.T.); +#26329 = VERTEX_POINT('',#26330); +#26330 = CARTESIAN_POINT('',(-1.5,-1.1,1.08)); +#26331 = LINE('',#26332,#26333); +#26332 = CARTESIAN_POINT('',(-1.5,1.1,1.08)); +#26333 = VECTOR('',#26334,1.); +#26334 = DIRECTION('',(-2.0185873175E-16,-1.,0.)); +#26335 = ORIENTED_EDGE('',*,*,#26336,.F.); +#26336 = EDGE_CURVE('',#26337,#26329,#26339,.T.); +#26337 = VERTEX_POINT('',#26338); +#26338 = CARTESIAN_POINT('',(-1.5,-1.25,0.63)); +#26339 = LINE('',#26340,#26341); +#26340 = CARTESIAN_POINT('',(-1.5,-1.25,0.63)); +#26341 = VECTOR('',#26342,1.); +#26342 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#26343 = ORIENTED_EDGE('',*,*,#26344,.F.); +#26344 = EDGE_CURVE('',#26345,#26337,#26347,.T.); +#26345 = VERTEX_POINT('',#26346); +#26346 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#26347 = LINE('',#26348,#26349); +#26348 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#26349 = VECTOR('',#26350,1.); +#26350 = DIRECTION('',(0.,0.,1.)); +#26351 = ORIENTED_EDGE('',*,*,#26352,.F.); +#26352 = EDGE_CURVE('',#26248,#26345,#26353,.T.); +#26353 = LINE('',#26354,#26355); +#26354 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#26355 = VECTOR('',#26356,1.); +#26356 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26357 = ORIENTED_EDGE('',*,*,#26247,.F.); +#26358 = ORIENTED_EDGE('',*,*,#25651,.F.); +#26359 = ORIENTED_EDGE('',*,*,#25755,.F.); +#26360 = ORIENTED_EDGE('',*,*,#26361,.T.); +#26361 = EDGE_CURVE('',#25746,#26362,#26364,.T.); +#26362 = VERTEX_POINT('',#26363); +#26363 = CARTESIAN_POINT('',(-1.5,-0.7,0.1)); +#26364 = LINE('',#26365,#26366); +#26365 = CARTESIAN_POINT('',(-1.5,-0.7,0.)); +#26366 = VECTOR('',#26367,1.); +#26367 = DIRECTION('',(0.,0.,1.)); +#26368 = ORIENTED_EDGE('',*,*,#26369,.F.); +#26369 = EDGE_CURVE('',#26370,#26362,#26372,.T.); +#26370 = VERTEX_POINT('',#26371); +#26371 = CARTESIAN_POINT('',(-1.5,0.7,0.1)); +#26372 = LINE('',#26373,#26374); +#26373 = CARTESIAN_POINT('',(-1.5,0.525,0.1)); +#26374 = VECTOR('',#26375,1.); +#26375 = DIRECTION('',(0.,-1.,0.)); +#26376 = ORIENTED_EDGE('',*,*,#26377,.T.); +#26377 = EDGE_CURVE('',#26370,#25866,#26378,.T.); +#26378 = LINE('',#26379,#26380); +#26379 = CARTESIAN_POINT('',(-1.5,0.7,0.)); +#26380 = VECTOR('',#26381,1.); +#26381 = DIRECTION('',(0.,0.,-1.)); +#26382 = PLANE('',#26383); +#26383 = AXIS2_PLACEMENT_3D('',#26384,#26385,#26386); +#26384 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#26385 = DIRECTION('',(1.,0.,0.)); +#26386 = DIRECTION('',(0.,-1.,0.)); +#26387 = ADVANCED_FACE('',(#26388),#26415,.F.); +#26388 = FACE_BOUND('',#26389,.F.); +#26389 = EDGE_LOOP('',(#26390,#26391,#26399,#26407,#26413,#26414)); +#26390 = ORIENTED_EDGE('',*,*,#25873,.T.); +#26391 = ORIENTED_EDGE('',*,*,#26392,.T.); +#26392 = EDGE_CURVE('',#25866,#26393,#26395,.T.); +#26393 = VERTEX_POINT('',#26394); +#26394 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#26395 = LINE('',#26396,#26397); +#26396 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#26397 = VECTOR('',#26398,1.); +#26398 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26399 = ORIENTED_EDGE('',*,*,#26400,.T.); +#26400 = EDGE_CURVE('',#26393,#26401,#26403,.T.); +#26401 = VERTEX_POINT('',#26402); +#26402 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#26403 = LINE('',#26404,#26405); +#26404 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#26405 = VECTOR('',#26406,1.); +#26406 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#26407 = ORIENTED_EDGE('',*,*,#26408,.T.); +#26408 = EDGE_CURVE('',#26401,#25746,#26409,.T.); +#26409 = LINE('',#26410,#26411); +#26410 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#26411 = VECTOR('',#26412,1.); +#26412 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#26413 = ORIENTED_EDGE('',*,*,#25745,.T.); +#26414 = ORIENTED_EDGE('',*,*,#25881,.T.); +#26415 = PLANE('',#26416); +#26416 = AXIS2_PLACEMENT_3D('',#26417,#26418,#26419); +#26417 = CARTESIAN_POINT('',(-1.7,-3.673940397442E-17,0.)); +#26418 = DIRECTION('',(0.,0.,1.)); +#26419 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26420 = ADVANCED_FACE('',(#26421),#26448,.F.); +#26421 = FACE_BOUND('',#26422,.F.); +#26422 = EDGE_LOOP('',(#26423,#26424,#26425,#26433,#26441,#26447)); +#26423 = ORIENTED_EDGE('',*,*,#25770,.F.); +#26424 = ORIENTED_EDGE('',*,*,#25895,.T.); +#26425 = ORIENTED_EDGE('',*,*,#26426,.T.); +#26426 = EDGE_CURVE('',#25896,#26427,#26429,.T.); +#26427 = VERTEX_POINT('',#26428); +#26428 = CARTESIAN_POINT('',(-0.925,-1.25,0.6)); +#26429 = LINE('',#26430,#26431); +#26430 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#26431 = VECTOR('',#26432,1.); +#26432 = DIRECTION('',(0.,0.,1.)); +#26433 = ORIENTED_EDGE('',*,*,#26434,.T.); +#26434 = EDGE_CURVE('',#26427,#26435,#26437,.T.); +#26435 = VERTEX_POINT('',#26436); +#26436 = CARTESIAN_POINT('',(0.925,-1.25,0.6)); +#26437 = LINE('',#26438,#26439); +#26438 = CARTESIAN_POINT('',(-0.925,-1.25,0.6)); +#26439 = VECTOR('',#26440,1.); +#26440 = DIRECTION('',(1.,0.,0.)); +#26441 = ORIENTED_EDGE('',*,*,#26442,.F.); +#26442 = EDGE_CURVE('',#25960,#26435,#26443,.T.); +#26443 = LINE('',#26444,#26445); +#26444 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#26445 = VECTOR('',#26446,1.); +#26446 = DIRECTION('',(0.,0.,1.)); +#26447 = ORIENTED_EDGE('',*,*,#25959,.F.); +#26448 = PLANE('',#26449); +#26449 = AXIS2_PLACEMENT_3D('',#26450,#26451,#26452); +#26450 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#26451 = DIRECTION('',(0.,1.,0.)); +#26452 = DIRECTION('',(0.,-0.,1.)); +#26453 = ADVANCED_FACE('',(#26454),#26481,.F.); +#26454 = FACE_BOUND('',#26455,.F.); +#26455 = EDGE_LOOP('',(#26456,#26457,#26465,#26473,#26479,#26480)); +#26456 = ORIENTED_EDGE('',*,*,#25793,.T.); +#26457 = ORIENTED_EDGE('',*,*,#26458,.T.); +#26458 = EDGE_CURVE('',#25786,#26459,#26461,.T.); +#26459 = VERTEX_POINT('',#26460); +#26460 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#26461 = LINE('',#26462,#26463); +#26462 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#26463 = VECTOR('',#26464,1.); +#26464 = DIRECTION('',(1.,0.,0.)); +#26465 = ORIENTED_EDGE('',*,*,#26466,.T.); +#26466 = EDGE_CURVE('',#26459,#26467,#26469,.T.); +#26467 = VERTEX_POINT('',#26468); +#26468 = CARTESIAN_POINT('',(2.,0.7,0.)); +#26469 = LINE('',#26470,#26471); +#26470 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#26471 = VECTOR('',#26472,1.); +#26472 = DIRECTION('',(0.,1.,0.)); +#26473 = ORIENTED_EDGE('',*,*,#26474,.T.); +#26474 = EDGE_CURVE('',#26467,#25810,#26475,.T.); +#26475 = LINE('',#26476,#26477); +#26476 = CARTESIAN_POINT('',(2.,0.7,0.)); +#26477 = VECTOR('',#26478,1.); +#26478 = DIRECTION('',(-1.,0.,0.)); +#26479 = ORIENTED_EDGE('',*,*,#25809,.T.); +#26480 = ORIENTED_EDGE('',*,*,#25801,.T.); +#26481 = PLANE('',#26482); +#26482 = AXIS2_PLACEMENT_3D('',#26483,#26484,#26485); +#26483 = CARTESIAN_POINT('',(1.7,0.,0.)); +#26484 = DIRECTION('',(0.,0.,1.)); +#26485 = DIRECTION('',(1.,0.,-0.)); +#26486 = ADVANCED_FACE('',(#26487),#26553,.F.); +#26487 = FACE_BOUND('',#26488,.F.); +#26488 = EDGE_LOOP('',(#26489,#26490,#26491,#26499,#26507,#26515,#26523, + #26529,#26530,#26531,#26539,#26547)); +#26489 = ORIENTED_EDGE('',*,*,#25825,.F.); +#26490 = ORIENTED_EDGE('',*,*,#26082,.T.); +#26491 = ORIENTED_EDGE('',*,*,#26492,.T.); +#26492 = EDGE_CURVE('',#26075,#26493,#26495,.T.); +#26493 = VERTEX_POINT('',#26494); +#26494 = CARTESIAN_POINT('',(1.225,1.05,0.6)); +#26495 = LINE('',#26496,#26497); +#26496 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#26497 = VECTOR('',#26498,1.); +#26498 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26499 = ORIENTED_EDGE('',*,*,#26500,.F.); +#26500 = EDGE_CURVE('',#26501,#26493,#26503,.T.); +#26501 = VERTEX_POINT('',#26502); +#26502 = CARTESIAN_POINT('',(1.225,1.05,1.08)); +#26503 = LINE('',#26504,#26505); +#26504 = CARTESIAN_POINT('',(1.225,1.05,1.08)); +#26505 = VECTOR('',#26506,1.); +#26506 = DIRECTION('',(0.,0.,-1.)); +#26507 = ORIENTED_EDGE('',*,*,#26508,.T.); +#26508 = EDGE_CURVE('',#26501,#26509,#26511,.T.); +#26509 = VERTEX_POINT('',#26510); +#26510 = CARTESIAN_POINT('',(-1.225,1.05,1.08)); +#26511 = LINE('',#26512,#26513); +#26512 = CARTESIAN_POINT('',(1.5,1.05,1.08)); +#26513 = VECTOR('',#26514,1.); +#26514 = DIRECTION('',(-1.,0.,0.)); +#26515 = ORIENTED_EDGE('',*,*,#26516,.T.); +#26516 = EDGE_CURVE('',#26509,#26517,#26519,.T.); +#26517 = VERTEX_POINT('',#26518); +#26518 = CARTESIAN_POINT('',(-1.225,1.05,0.6)); +#26519 = LINE('',#26520,#26521); +#26520 = CARTESIAN_POINT('',(-1.225,1.05,1.08)); +#26521 = VECTOR('',#26522,1.); +#26522 = DIRECTION('',(0.,0.,-1.)); +#26523 = ORIENTED_EDGE('',*,*,#26524,.F.); +#26524 = EDGE_CURVE('',#26273,#26517,#26525,.T.); +#26525 = LINE('',#26526,#26527); +#26526 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#26527 = VECTOR('',#26528,1.); +#26528 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26529 = ORIENTED_EDGE('',*,*,#26272,.F.); +#26530 = ORIENTED_EDGE('',*,*,#25857,.F.); +#26531 = ORIENTED_EDGE('',*,*,#26532,.T.); +#26532 = EDGE_CURVE('',#25850,#26533,#26535,.T.); +#26533 = VERTEX_POINT('',#26534); +#26534 = CARTESIAN_POINT('',(-0.925,1.05,0.6)); +#26535 = LINE('',#26536,#26537); +#26536 = CARTESIAN_POINT('',(-0.925,1.05,0.)); +#26537 = VECTOR('',#26538,1.); +#26538 = DIRECTION('',(0.,0.,1.)); +#26539 = ORIENTED_EDGE('',*,*,#26540,.T.); +#26540 = EDGE_CURVE('',#26533,#26541,#26543,.T.); +#26541 = VERTEX_POINT('',#26542); +#26542 = CARTESIAN_POINT('',(0.925,1.05,0.6)); +#26543 = LINE('',#26544,#26545); +#26544 = CARTESIAN_POINT('',(-0.925,1.05,0.6)); +#26545 = VECTOR('',#26546,1.); +#26546 = DIRECTION('',(1.,0.,0.)); +#26547 = ORIENTED_EDGE('',*,*,#26548,.F.); +#26548 = EDGE_CURVE('',#25826,#26541,#26549,.T.); +#26549 = LINE('',#26550,#26551); +#26550 = CARTESIAN_POINT('',(0.925,1.05,0.)); +#26551 = VECTOR('',#26552,1.); +#26552 = DIRECTION('',(0.,0.,1.)); +#26553 = PLANE('',#26554); +#26554 = AXIS2_PLACEMENT_3D('',#26555,#26556,#26557); +#26555 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#26556 = DIRECTION('',(0.,-1.,0.)); +#26557 = DIRECTION('',(-1.,0.,0.)); +#26558 = ADVANCED_FACE('',(#26559),#26593,.T.); +#26559 = FACE_BOUND('',#26560,.T.); +#26560 = EDGE_LOOP('',(#26561,#26569,#26570,#26571,#26579,#26587)); +#26561 = ORIENTED_EDGE('',*,*,#26562,.F.); +#26562 = EDGE_CURVE('',#26541,#26563,#26565,.T.); +#26563 = VERTEX_POINT('',#26564); +#26564 = CARTESIAN_POINT('',(0.925,1.13,0.6)); +#26565 = LINE('',#26566,#26567); +#26566 = CARTESIAN_POINT('',(0.925,1.05,0.6)); +#26567 = VECTOR('',#26568,1.); +#26568 = DIRECTION('',(0.,1.,0.)); +#26569 = ORIENTED_EDGE('',*,*,#26548,.F.); +#26570 = ORIENTED_EDGE('',*,*,#25833,.T.); +#26571 = ORIENTED_EDGE('',*,*,#26572,.T.); +#26572 = EDGE_CURVE('',#25834,#26573,#26575,.T.); +#26573 = VERTEX_POINT('',#26574); +#26574 = CARTESIAN_POINT('',(0.925,1.25,0.1)); +#26575 = LINE('',#26576,#26577); +#26576 = CARTESIAN_POINT('',(0.925,1.25,0.)); +#26577 = VECTOR('',#26578,1.); +#26578 = DIRECTION('',(0.,0.,1.)); +#26579 = ORIENTED_EDGE('',*,*,#26580,.F.); +#26580 = EDGE_CURVE('',#26581,#26573,#26583,.T.); +#26581 = VERTEX_POINT('',#26582); +#26582 = CARTESIAN_POINT('',(0.925,1.13,0.1)); +#26583 = LINE('',#26584,#26585); +#26584 = CARTESIAN_POINT('',(0.925,1.13,0.1)); +#26585 = VECTOR('',#26586,1.); +#26586 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26587 = ORIENTED_EDGE('',*,*,#26588,.T.); +#26588 = EDGE_CURVE('',#26581,#26563,#26589,.T.); +#26589 = LINE('',#26590,#26591); +#26590 = CARTESIAN_POINT('',(0.925,1.13,0.1)); +#26591 = VECTOR('',#26592,1.); +#26592 = DIRECTION('',(0.,0.,1.)); +#26593 = PLANE('',#26594); +#26594 = AXIS2_PLACEMENT_3D('',#26595,#26596,#26597); +#26595 = CARTESIAN_POINT('',(0.925,1.05,0.)); +#26596 = DIRECTION('',(1.,0.,0.)); +#26597 = DIRECTION('',(0.,0.,1.)); +#26598 = ADVANCED_FACE('',(#26599),#26633,.T.); +#26599 = FACE_BOUND('',#26600,.T.); +#26600 = EDGE_LOOP('',(#26601,#26602,#26610,#26618,#26626,#26632)); +#26601 = ORIENTED_EDGE('',*,*,#25841,.F.); +#26602 = ORIENTED_EDGE('',*,*,#26603,.T.); +#26603 = EDGE_CURVE('',#25842,#26604,#26606,.T.); +#26604 = VERTEX_POINT('',#26605); +#26605 = CARTESIAN_POINT('',(-0.925,1.25,0.1)); +#26606 = LINE('',#26607,#26608); +#26607 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#26608 = VECTOR('',#26609,1.); +#26609 = DIRECTION('',(0.,0.,1.)); +#26610 = ORIENTED_EDGE('',*,*,#26611,.T.); +#26611 = EDGE_CURVE('',#26604,#26612,#26614,.T.); +#26612 = VERTEX_POINT('',#26613); +#26613 = CARTESIAN_POINT('',(-0.925,1.25,0.6)); +#26614 = LINE('',#26615,#26616); +#26615 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#26616 = VECTOR('',#26617,1.); +#26617 = DIRECTION('',(0.,0.,1.)); +#26618 = ORIENTED_EDGE('',*,*,#26619,.T.); +#26619 = EDGE_CURVE('',#26612,#26620,#26622,.T.); +#26620 = VERTEX_POINT('',#26621); +#26621 = CARTESIAN_POINT('',(0.925,1.25,0.6)); +#26622 = LINE('',#26623,#26624); +#26623 = CARTESIAN_POINT('',(-0.925,1.25,0.6)); +#26624 = VECTOR('',#26625,1.); +#26625 = DIRECTION('',(1.,0.,0.)); +#26626 = ORIENTED_EDGE('',*,*,#26627,.F.); +#26627 = EDGE_CURVE('',#26573,#26620,#26628,.T.); +#26628 = LINE('',#26629,#26630); +#26629 = CARTESIAN_POINT('',(0.925,1.25,0.)); +#26630 = VECTOR('',#26631,1.); +#26631 = DIRECTION('',(0.,0.,1.)); +#26632 = ORIENTED_EDGE('',*,*,#26572,.F.); +#26633 = PLANE('',#26634); +#26634 = AXIS2_PLACEMENT_3D('',#26635,#26636,#26637); +#26635 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#26636 = DIRECTION('',(0.,1.,0.)); +#26637 = DIRECTION('',(0.,-0.,1.)); +#26638 = ADVANCED_FACE('',(#26639),#26666,.F.); +#26639 = FACE_BOUND('',#26640,.F.); +#26640 = EDGE_LOOP('',(#26641,#26649,#26650,#26651,#26652,#26660)); +#26641 = ORIENTED_EDGE('',*,*,#26642,.F.); +#26642 = EDGE_CURVE('',#26533,#26643,#26645,.T.); +#26643 = VERTEX_POINT('',#26644); +#26644 = CARTESIAN_POINT('',(-0.925,1.13,0.6)); +#26645 = LINE('',#26646,#26647); +#26646 = CARTESIAN_POINT('',(-0.925,1.05,0.6)); +#26647 = VECTOR('',#26648,1.); +#26648 = DIRECTION('',(0.,1.,0.)); +#26649 = ORIENTED_EDGE('',*,*,#26532,.F.); +#26650 = ORIENTED_EDGE('',*,*,#25849,.T.); +#26651 = ORIENTED_EDGE('',*,*,#26603,.T.); +#26652 = ORIENTED_EDGE('',*,*,#26653,.F.); +#26653 = EDGE_CURVE('',#26654,#26604,#26656,.T.); +#26654 = VERTEX_POINT('',#26655); +#26655 = CARTESIAN_POINT('',(-0.925,1.13,0.1)); +#26656 = LINE('',#26657,#26658); +#26657 = CARTESIAN_POINT('',(-0.925,1.13,0.1)); +#26658 = VECTOR('',#26659,1.); +#26659 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26660 = ORIENTED_EDGE('',*,*,#26661,.T.); +#26661 = EDGE_CURVE('',#26654,#26643,#26662,.T.); +#26662 = LINE('',#26663,#26664); +#26663 = CARTESIAN_POINT('',(-0.925,1.13,0.1)); +#26664 = VECTOR('',#26665,1.); +#26665 = DIRECTION('',(0.,0.,1.)); +#26666 = PLANE('',#26667); +#26667 = AXIS2_PLACEMENT_3D('',#26668,#26669,#26670); +#26668 = CARTESIAN_POINT('',(-0.925,1.05,0.)); +#26669 = DIRECTION('',(1.,0.,0.)); +#26670 = DIRECTION('',(0.,0.,1.)); +#26671 = ADVANCED_FACE('',(#26672),#26697,.T.); +#26672 = FACE_BOUND('',#26673,.F.); +#26673 = EDGE_LOOP('',(#26674,#26684,#26690,#26691)); +#26674 = ORIENTED_EDGE('',*,*,#26675,.T.); +#26675 = EDGE_CURVE('',#26676,#26678,#26680,.T.); +#26676 = VERTEX_POINT('',#26677); +#26677 = CARTESIAN_POINT('',(-1.5,-1.13,0.1)); +#26678 = VERTEX_POINT('',#26679); +#26679 = CARTESIAN_POINT('',(-1.5,-1.25,0.1)); +#26680 = LINE('',#26681,#26682); +#26681 = CARTESIAN_POINT('',(-1.5,-1.13,0.1)); +#26682 = VECTOR('',#26683,1.); +#26683 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26684 = ORIENTED_EDGE('',*,*,#26685,.T.); +#26685 = EDGE_CURVE('',#26678,#25896,#26686,.T.); +#26686 = LINE('',#26687,#26688); +#26687 = CARTESIAN_POINT('',(-1.5,-1.25,0.1)); +#26688 = VECTOR('',#26689,1.); +#26689 = DIRECTION('',(1.,-2.22044604925E-16,4.827056628805E-17)); +#26690 = ORIENTED_EDGE('',*,*,#25921,.F.); +#26691 = ORIENTED_EDGE('',*,*,#26692,.F.); +#26692 = EDGE_CURVE('',#26676,#25914,#26693,.T.); +#26693 = LINE('',#26694,#26695); +#26694 = CARTESIAN_POINT('',(-1.5,-1.13,0.1)); +#26695 = VECTOR('',#26696,1.); +#26696 = DIRECTION('',(1.,-2.22044604925E-16,4.827056628805E-17)); +#26697 = PLANE('',#26698); +#26698 = AXIS2_PLACEMENT_3D('',#26699,#26700,#26701); +#26699 = CARTESIAN_POINT('',(-1.5,-1.13,0.1)); +#26700 = DIRECTION('',(4.827056628805E-17,-1.071821882094E-32,-1.)); +#26701 = DIRECTION('',(-1.,2.22044604925E-16,-4.827056628805E-17)); +#26702 = ADVANCED_FACE('',(#26703),#26746,.T.); +#26703 = FACE_BOUND('',#26704,.T.); +#26704 = EDGE_LOOP('',(#26705,#26711,#26712,#26713,#26721,#26727,#26728, + #26729,#26730,#26731,#26737,#26738,#26739,#26745)); +#26705 = ORIENTED_EDGE('',*,*,#26706,.T.); +#26706 = EDGE_CURVE('',#26193,#26146,#26707,.T.); +#26707 = LINE('',#26708,#26709); +#26708 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#26709 = VECTOR('',#26710,1.); +#26710 = DIRECTION('',(0.,0.,-1.)); +#26711 = ORIENTED_EDGE('',*,*,#26145,.T.); +#26712 = ORIENTED_EDGE('',*,*,#26129,.T.); +#26713 = ORIENTED_EDGE('',*,*,#26714,.T.); +#26714 = EDGE_CURVE('',#25995,#26715,#26717,.T.); +#26715 = VERTEX_POINT('',#26716); +#26716 = CARTESIAN_POINT('',(1.5,-1.13,0.1)); +#26717 = LINE('',#26718,#26719); +#26718 = CARTESIAN_POINT('',(1.5,-1.13,0.6)); +#26719 = VECTOR('',#26720,1.); +#26720 = DIRECTION('',(0.,0.,-1.)); +#26721 = ORIENTED_EDGE('',*,*,#26722,.T.); +#26722 = EDGE_CURVE('',#26715,#25971,#26723,.T.); +#26723 = LINE('',#26724,#26725); +#26724 = CARTESIAN_POINT('',(1.5,-1.13,0.1)); +#26725 = VECTOR('',#26726,1.); +#26726 = DIRECTION('',(-1.,2.22044604925E-16,4.827056628805E-17)); +#26727 = ORIENTED_EDGE('',*,*,#25970,.T.); +#26728 = ORIENTED_EDGE('',*,*,#25936,.T.); +#26729 = ORIENTED_EDGE('',*,*,#25913,.F.); +#26730 = ORIENTED_EDGE('',*,*,#26692,.F.); +#26731 = ORIENTED_EDGE('',*,*,#26732,.F.); +#26732 = EDGE_CURVE('',#26248,#26676,#26733,.T.); +#26733 = LINE('',#26734,#26735); +#26734 = CARTESIAN_POINT('',(-1.5,-1.13,0.6)); +#26735 = VECTOR('',#26736,1.); +#26736 = DIRECTION('',(0.,0.,-1.)); +#26737 = ORIENTED_EDGE('',*,*,#26257,.F.); +#26738 = ORIENTED_EDGE('',*,*,#26224,.F.); +#26739 = ORIENTED_EDGE('',*,*,#26740,.F.); +#26740 = EDGE_CURVE('',#26185,#26225,#26741,.T.); +#26741 = LINE('',#26742,#26743); +#26742 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#26743 = VECTOR('',#26744,1.); +#26744 = DIRECTION('',(0.,0.,-1.)); +#26745 = ORIENTED_EDGE('',*,*,#26192,.T.); +#26746 = PLANE('',#26747); +#26747 = AXIS2_PLACEMENT_3D('',#26748,#26749,#26750); +#26748 = CARTESIAN_POINT('',(0.816633064516,-1.13,0.656633064516)); +#26749 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#26750 = DIRECTION('',(0.,0.,-1.)); +#26751 = ADVANCED_FACE('',(#26752),#26770,.T.); +#26752 = FACE_BOUND('',#26753,.T.); +#26753 = EDGE_LOOP('',(#26754,#26762,#26768,#26769)); +#26754 = ORIENTED_EDGE('',*,*,#26755,.T.); +#26755 = EDGE_CURVE('',#26715,#26756,#26758,.T.); +#26756 = VERTEX_POINT('',#26757); +#26757 = CARTESIAN_POINT('',(1.5,-1.25,0.1)); +#26758 = LINE('',#26759,#26760); +#26759 = CARTESIAN_POINT('',(1.5,-1.13,0.1)); +#26760 = VECTOR('',#26761,1.); +#26761 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#26762 = ORIENTED_EDGE('',*,*,#26763,.T.); +#26763 = EDGE_CURVE('',#26756,#25960,#26764,.T.); +#26764 = LINE('',#26765,#26766); +#26765 = CARTESIAN_POINT('',(1.5,-1.25,0.1)); +#26766 = VECTOR('',#26767,1.); +#26767 = DIRECTION('',(-1.,2.22044604925E-16,4.827056628805E-17)); +#26768 = ORIENTED_EDGE('',*,*,#25978,.F.); +#26769 = ORIENTED_EDGE('',*,*,#26722,.F.); +#26770 = PLANE('',#26771); +#26771 = AXIS2_PLACEMENT_3D('',#26772,#26773,#26774); +#26772 = CARTESIAN_POINT('',(1.5,-1.13,0.1)); +#26773 = DIRECTION('',(-4.827056628805E-17,1.071821882094E-32,-1.)); +#26774 = DIRECTION('',(-1.,2.22044604925E-16,4.827056628805E-17)); +#26775 = ADVANCED_FACE('',(#26776),#26794,.F.); +#26776 = FACE_BOUND('',#26777,.F.); +#26777 = EDGE_LOOP('',(#26778,#26779,#26780,#26788)); +#26778 = ORIENTED_EDGE('',*,*,#26458,.F.); +#26779 = ORIENTED_EDGE('',*,*,#26105,.F.); +#26780 = ORIENTED_EDGE('',*,*,#26781,.T.); +#26781 = EDGE_CURVE('',#26098,#26782,#26784,.T.); +#26782 = VERTEX_POINT('',#26783); +#26783 = CARTESIAN_POINT('',(2.,-0.7,0.1)); +#26784 = LINE('',#26785,#26786); +#26785 = CARTESIAN_POINT('',(1.4,-0.7,0.1)); +#26786 = VECTOR('',#26787,1.); +#26787 = DIRECTION('',(1.,0.,0.)); +#26788 = ORIENTED_EDGE('',*,*,#26789,.F.); +#26789 = EDGE_CURVE('',#26459,#26782,#26790,.T.); +#26790 = LINE('',#26791,#26792); +#26791 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#26792 = VECTOR('',#26793,1.); +#26793 = DIRECTION('',(0.,0.,1.)); +#26794 = PLANE('',#26795); +#26795 = AXIS2_PLACEMENT_3D('',#26796,#26797,#26798); +#26796 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#26797 = DIRECTION('',(0.,1.,0.)); +#26798 = DIRECTION('',(1.,0.,0.)); +#26799 = ADVANCED_FACE('',(#26800),#26818,.T.); +#26800 = FACE_BOUND('',#26801,.T.); +#26801 = EDGE_LOOP('',(#26802,#26803,#26804,#26812)); +#26802 = ORIENTED_EDGE('',*,*,#26097,.F.); +#26803 = ORIENTED_EDGE('',*,*,#26781,.T.); +#26804 = ORIENTED_EDGE('',*,*,#26805,.T.); +#26805 = EDGE_CURVE('',#26782,#26806,#26808,.T.); +#26806 = VERTEX_POINT('',#26807); +#26807 = CARTESIAN_POINT('',(2.,0.7,0.1)); +#26808 = LINE('',#26809,#26810); +#26809 = CARTESIAN_POINT('',(2.,-0.7,0.1)); +#26810 = VECTOR('',#26811,1.); +#26811 = DIRECTION('',(0.,1.,0.)); +#26812 = ORIENTED_EDGE('',*,*,#26813,.T.); +#26813 = EDGE_CURVE('',#26806,#26090,#26814,.T.); +#26814 = LINE('',#26815,#26816); +#26815 = CARTESIAN_POINT('',(2.,0.7,0.1)); +#26816 = VECTOR('',#26817,1.); +#26817 = DIRECTION('',(-1.,0.,0.)); +#26818 = PLANE('',#26819); +#26819 = AXIS2_PLACEMENT_3D('',#26820,#26821,#26822); +#26820 = CARTESIAN_POINT('',(1.7,0.,0.1)); +#26821 = DIRECTION('',(0.,0.,1.)); +#26822 = DIRECTION('',(1.,0.,-0.)); +#26823 = ADVANCED_FACE('',(#26824),#26835,.F.); +#26824 = FACE_BOUND('',#26825,.F.); +#26825 = EDGE_LOOP('',(#26826,#26827,#26833,#26834)); +#26826 = ORIENTED_EDGE('',*,*,#26474,.F.); +#26827 = ORIENTED_EDGE('',*,*,#26828,.T.); +#26828 = EDGE_CURVE('',#26467,#26806,#26829,.T.); +#26829 = LINE('',#26830,#26831); +#26830 = CARTESIAN_POINT('',(2.,0.7,0.)); +#26831 = VECTOR('',#26832,1.); +#26832 = DIRECTION('',(0.,0.,1.)); +#26833 = ORIENTED_EDGE('',*,*,#26813,.T.); +#26834 = ORIENTED_EDGE('',*,*,#26089,.F.); +#26835 = PLANE('',#26836); +#26836 = AXIS2_PLACEMENT_3D('',#26837,#26838,#26839); +#26837 = CARTESIAN_POINT('',(2.,0.7,0.)); +#26838 = DIRECTION('',(0.,-1.,0.)); +#26839 = DIRECTION('',(-1.,0.,0.)); +#26840 = ADVANCED_FACE('',(#26841),#26859,.F.); +#26841 = FACE_BOUND('',#26842,.T.); +#26842 = EDGE_LOOP('',(#26843,#26844,#26845,#26853)); +#26843 = ORIENTED_EDGE('',*,*,#26074,.F.); +#26844 = ORIENTED_EDGE('',*,*,#26492,.T.); +#26845 = ORIENTED_EDGE('',*,*,#26846,.T.); +#26846 = EDGE_CURVE('',#26493,#26847,#26849,.T.); +#26847 = VERTEX_POINT('',#26848); +#26848 = CARTESIAN_POINT('',(1.225,1.13,0.6)); +#26849 = LINE('',#26850,#26851); +#26850 = CARTESIAN_POINT('',(1.225,1.05,0.6)); +#26851 = VECTOR('',#26852,1.); +#26852 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26853 = ORIENTED_EDGE('',*,*,#26854,.T.); +#26854 = EDGE_CURVE('',#26847,#26067,#26855,.T.); +#26855 = LINE('',#26856,#26857); +#26856 = CARTESIAN_POINT('',(1.225,1.13,0.6)); +#26857 = VECTOR('',#26858,1.); +#26858 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26859 = PLANE('',#26860); +#26860 = AXIS2_PLACEMENT_3D('',#26861,#26862,#26863); +#26861 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#26862 = DIRECTION('',(0.,0.,1.)); +#26863 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#26864 = ADVANCED_FACE('',(#26865),#26890,.T.); +#26865 = FACE_BOUND('',#26866,.F.); +#26866 = EDGE_LOOP('',(#26867,#26868,#26876,#26884)); +#26867 = ORIENTED_EDGE('',*,*,#26066,.T.); +#26868 = ORIENTED_EDGE('',*,*,#26869,.T.); +#26869 = EDGE_CURVE('',#26059,#26870,#26872,.T.); +#26870 = VERTEX_POINT('',#26871); +#26871 = CARTESIAN_POINT('',(1.5,1.25,0.1)); +#26872 = LINE('',#26873,#26874); +#26873 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#26874 = VECTOR('',#26875,1.); +#26875 = DIRECTION('',(0.,0.,-1.)); +#26876 = ORIENTED_EDGE('',*,*,#26877,.F.); +#26877 = EDGE_CURVE('',#26878,#26870,#26880,.T.); +#26878 = VERTEX_POINT('',#26879); +#26879 = CARTESIAN_POINT('',(1.5,1.13,0.1)); +#26880 = LINE('',#26881,#26882); +#26881 = CARTESIAN_POINT('',(1.5,1.13,0.1)); +#26882 = VECTOR('',#26883,1.); +#26883 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26884 = ORIENTED_EDGE('',*,*,#26885,.F.); +#26885 = EDGE_CURVE('',#26067,#26878,#26886,.T.); +#26886 = LINE('',#26887,#26888); +#26887 = CARTESIAN_POINT('',(1.5,1.13,0.6)); +#26888 = VECTOR('',#26889,1.); +#26889 = DIRECTION('',(0.,0.,-1.)); +#26890 = PLANE('',#26891); +#26891 = AXIS2_PLACEMENT_3D('',#26892,#26893,#26894); +#26892 = CARTESIAN_POINT('',(1.5,1.13,0.6)); +#26893 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#26894 = DIRECTION('',(0.,0.,1.)); +#26895 = ADVANCED_FACE('',(#26896),#26921,.F.); +#26896 = FACE_BOUND('',#26897,.T.); +#26897 = EDGE_LOOP('',(#26898,#26906,#26914,#26920)); +#26898 = ORIENTED_EDGE('',*,*,#26899,.T.); +#26899 = EDGE_CURVE('',#26059,#26900,#26902,.T.); +#26900 = VERTEX_POINT('',#26901); +#26901 = CARTESIAN_POINT('',(1.225,1.25,0.6)); +#26902 = LINE('',#26903,#26904); +#26903 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#26904 = VECTOR('',#26905,1.); +#26905 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26906 = ORIENTED_EDGE('',*,*,#26907,.T.); +#26907 = EDGE_CURVE('',#26900,#26908,#26910,.T.); +#26908 = VERTEX_POINT('',#26909); +#26909 = CARTESIAN_POINT('',(1.225,1.25,0.63)); +#26910 = LINE('',#26911,#26912); +#26911 = CARTESIAN_POINT('',(1.225,1.25,0.6)); +#26912 = VECTOR('',#26913,1.); +#26913 = DIRECTION('',(0.,0.,1.)); +#26914 = ORIENTED_EDGE('',*,*,#26915,.F.); +#26915 = EDGE_CURVE('',#26051,#26908,#26916,.T.); +#26916 = LINE('',#26917,#26918); +#26917 = CARTESIAN_POINT('',(1.5,1.25,0.63)); +#26918 = VECTOR('',#26919,1.); +#26919 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26920 = ORIENTED_EDGE('',*,*,#26058,.F.); +#26921 = PLANE('',#26922); +#26922 = AXIS2_PLACEMENT_3D('',#26923,#26924,#26925); +#26923 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#26924 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#26925 = DIRECTION('',(0.,0.,-1.)); +#26926 = ADVANCED_FACE('',(#26927),#26953,.F.); +#26927 = FACE_BOUND('',#26928,.T.); +#26928 = EDGE_LOOP('',(#26929,#26930,#26938,#26946,#26952)); +#26929 = ORIENTED_EDGE('',*,*,#26915,.T.); +#26930 = ORIENTED_EDGE('',*,*,#26931,.T.); +#26931 = EDGE_CURVE('',#26908,#26932,#26934,.T.); +#26932 = VERTEX_POINT('',#26933); +#26933 = CARTESIAN_POINT('',(1.225,1.13,0.99)); +#26934 = LINE('',#26935,#26936); +#26935 = CARTESIAN_POINT('',(1.225,1.25,0.63)); +#26936 = VECTOR('',#26937,1.); +#26937 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#26938 = ORIENTED_EDGE('',*,*,#26939,.T.); +#26939 = EDGE_CURVE('',#26932,#26940,#26942,.T.); +#26940 = VERTEX_POINT('',#26941); +#26941 = CARTESIAN_POINT('',(1.225,1.1,1.08)); +#26942 = LINE('',#26943,#26944); +#26943 = CARTESIAN_POINT('',(1.225,1.25,0.63)); +#26944 = VECTOR('',#26945,1.); +#26945 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#26946 = ORIENTED_EDGE('',*,*,#26947,.F.); +#26947 = EDGE_CURVE('',#26043,#26940,#26948,.T.); +#26948 = LINE('',#26949,#26950); +#26949 = CARTESIAN_POINT('',(1.5,1.1,1.08)); +#26950 = VECTOR('',#26951,1.); +#26951 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#26952 = ORIENTED_EDGE('',*,*,#26050,.F.); +#26953 = PLANE('',#26954); +#26954 = AXIS2_PLACEMENT_3D('',#26955,#26956,#26957); +#26955 = CARTESIAN_POINT('',(1.5,1.25,0.63)); +#26956 = DIRECTION('',(-1.053250040572E-16,-0.948683298051, + -0.316227766017)); +#26957 = DIRECTION('',(3.510833468575E-17,0.316227766017,-0.948683298051 + )); +#26958 = ADVANCED_FACE('',(#26959),#26983,.T.); +#26959 = FACE_BOUND('',#26960,.T.); +#26960 = EDGE_LOOP('',(#26961,#26969,#26970,#26971,#26977)); +#26961 = ORIENTED_EDGE('',*,*,#26962,.F.); +#26962 = EDGE_CURVE('',#26035,#26963,#26965,.T.); +#26963 = VERTEX_POINT('',#26964); +#26964 = CARTESIAN_POINT('',(1.225,1.,1.08)); +#26965 = LINE('',#26966,#26967); +#26966 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#26967 = VECTOR('',#26968,1.); +#26968 = DIRECTION('',(-1.,0.,0.)); +#26969 = ORIENTED_EDGE('',*,*,#26042,.F.); +#26970 = ORIENTED_EDGE('',*,*,#26947,.T.); +#26971 = ORIENTED_EDGE('',*,*,#26972,.T.); +#26972 = EDGE_CURVE('',#26940,#26501,#26973,.T.); +#26973 = LINE('',#26974,#26975); +#26974 = CARTESIAN_POINT('',(1.225,1.1,1.08)); +#26975 = VECTOR('',#26976,1.); +#26976 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#26977 = ORIENTED_EDGE('',*,*,#26978,.T.); +#26978 = EDGE_CURVE('',#26501,#26963,#26979,.T.); +#26979 = LINE('',#26980,#26981); +#26980 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#26981 = VECTOR('',#26982,1.); +#26982 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#26983 = PLANE('',#26984); +#26984 = AXIS2_PLACEMENT_3D('',#26985,#26986,#26987); +#26985 = CARTESIAN_POINT('',(0.,0.,1.08)); +#26986 = DIRECTION('',(0.,0.,1.)); +#26987 = DIRECTION('',(1.,0.,-0.)); +#26988 = ADVANCED_FACE('',(#26989),#27014,.F.); +#26989 = FACE_BOUND('',#26990,.F.); +#26990 = EDGE_LOOP('',(#26991,#26999,#27007,#27013)); +#26991 = ORIENTED_EDGE('',*,*,#26992,.T.); +#26992 = EDGE_CURVE('',#26027,#26993,#26995,.T.); +#26993 = VERTEX_POINT('',#26994); +#26994 = CARTESIAN_POINT('',(1.5,-1.,1.2)); +#26995 = LINE('',#26996,#26997); +#26996 = CARTESIAN_POINT('',(1.5,-1.,1.08)); +#26997 = VECTOR('',#26998,1.); +#26998 = DIRECTION('',(0.,0.,1.)); +#26999 = ORIENTED_EDGE('',*,*,#27000,.T.); +#27000 = EDGE_CURVE('',#26993,#27001,#27003,.T.); +#27001 = VERTEX_POINT('',#27002); +#27002 = CARTESIAN_POINT('',(1.5,1.,1.2)); +#27003 = LINE('',#27004,#27005); +#27004 = CARTESIAN_POINT('',(1.5,-1.,1.2)); +#27005 = VECTOR('',#27006,1.); +#27006 = DIRECTION('',(0.,1.,0.)); +#27007 = ORIENTED_EDGE('',*,*,#27008,.F.); +#27008 = EDGE_CURVE('',#26035,#27001,#27009,.T.); +#27009 = LINE('',#27010,#27011); +#27010 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#27011 = VECTOR('',#27012,1.); +#27012 = DIRECTION('',(0.,0.,1.)); +#27013 = ORIENTED_EDGE('',*,*,#26034,.F.); +#27014 = PLANE('',#27015); +#27015 = AXIS2_PLACEMENT_3D('',#27016,#27017,#27018); +#27016 = CARTESIAN_POINT('',(1.5,-1.,1.08)); +#27017 = DIRECTION('',(-1.,0.,0.)); +#27018 = DIRECTION('',(0.,1.,0.)); +#27019 = ADVANCED_FACE('',(#27020),#27044,.T.); +#27020 = FACE_BOUND('',#27021,.T.); +#27021 = EDGE_LOOP('',(#27022,#27030,#27031,#27037,#27038)); +#27022 = ORIENTED_EDGE('',*,*,#27023,.F.); +#27023 = EDGE_CURVE('',#25676,#27024,#27026,.T.); +#27024 = VERTEX_POINT('',#27025); +#27025 = CARTESIAN_POINT('',(1.225,-1.,1.08)); +#27026 = LINE('',#27027,#27028); +#27027 = CARTESIAN_POINT('',(1.225,-1.25,1.08)); +#27028 = VECTOR('',#27029,1.); +#27029 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27030 = ORIENTED_EDGE('',*,*,#26161,.F.); +#27031 = ORIENTED_EDGE('',*,*,#27032,.F.); +#27032 = EDGE_CURVE('',#26019,#26154,#27033,.T.); +#27033 = LINE('',#27034,#27035); +#27034 = CARTESIAN_POINT('',(1.5,-1.1,1.08)); +#27035 = VECTOR('',#27036,1.); +#27036 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#27037 = ORIENTED_EDGE('',*,*,#26026,.F.); +#27038 = ORIENTED_EDGE('',*,*,#27039,.F.); +#27039 = EDGE_CURVE('',#27024,#26027,#27040,.T.); +#27040 = LINE('',#27041,#27042); +#27041 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#27042 = VECTOR('',#27043,1.); +#27043 = DIRECTION('',(1.,0.,0.)); +#27044 = PLANE('',#27045); +#27045 = AXIS2_PLACEMENT_3D('',#27046,#27047,#27048); +#27046 = CARTESIAN_POINT('',(0.,0.,1.08)); +#27047 = DIRECTION('',(0.,0.,1.)); +#27048 = DIRECTION('',(1.,0.,-0.)); +#27049 = ADVANCED_FACE('',(#27050),#27069,.F.); +#27050 = FACE_BOUND('',#27051,.F.); +#27051 = EDGE_LOOP('',(#27052,#27060,#27066,#27067,#27068)); +#27052 = ORIENTED_EDGE('',*,*,#27053,.T.); +#27053 = EDGE_CURVE('',#26011,#27054,#27056,.T.); +#27054 = VERTEX_POINT('',#27055); +#27055 = CARTESIAN_POINT('',(1.225,-1.25,0.63)); +#27056 = LINE('',#27057,#27058); +#27057 = CARTESIAN_POINT('',(1.5,-1.25,0.63)); +#27058 = VECTOR('',#27059,1.); +#27059 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#27060 = ORIENTED_EDGE('',*,*,#27061,.T.); +#27061 = EDGE_CURVE('',#27054,#26146,#27062,.T.); +#27062 = LINE('',#27063,#27064); +#27063 = CARTESIAN_POINT('',(1.225,-1.25,0.63)); +#27064 = VECTOR('',#27065,1.); +#27065 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#27066 = ORIENTED_EDGE('',*,*,#26153,.T.); +#27067 = ORIENTED_EDGE('',*,*,#27032,.F.); +#27068 = ORIENTED_EDGE('',*,*,#26018,.F.); +#27069 = PLANE('',#27070); +#27070 = AXIS2_PLACEMENT_3D('',#27071,#27072,#27073); +#27071 = CARTESIAN_POINT('',(1.5,-1.25,0.63)); +#27072 = DIRECTION('',(2.106500081145E-16,0.948683298051,-0.316227766017 + )); +#27073 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#27074 = ADVANCED_FACE('',(#27075),#27093,.F.); +#27075 = FACE_BOUND('',#27076,.F.); +#27076 = EDGE_LOOP('',(#27077,#27085,#27091,#27092)); +#27077 = ORIENTED_EDGE('',*,*,#27078,.T.); +#27078 = EDGE_CURVE('',#26003,#27079,#27081,.T.); +#27079 = VERTEX_POINT('',#27080); +#27080 = CARTESIAN_POINT('',(1.225,-1.25,0.6)); +#27081 = LINE('',#27082,#27083); +#27082 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#27083 = VECTOR('',#27084,1.); +#27084 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#27085 = ORIENTED_EDGE('',*,*,#27086,.T.); +#27086 = EDGE_CURVE('',#27079,#27054,#27087,.T.); +#27087 = LINE('',#27088,#27089); +#27088 = CARTESIAN_POINT('',(1.225,-1.25,0.6)); +#27089 = VECTOR('',#27090,1.); +#27090 = DIRECTION('',(0.,0.,1.)); +#27091 = ORIENTED_EDGE('',*,*,#27053,.F.); +#27092 = ORIENTED_EDGE('',*,*,#26010,.F.); +#27093 = PLANE('',#27094); +#27094 = AXIS2_PLACEMENT_3D('',#27095,#27096,#27097); +#27095 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#27096 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27097 = DIRECTION('',(0.,-0.,1.)); +#27098 = ADVANCED_FACE('',(#27099),#27110,.T.); +#27099 = FACE_BOUND('',#27100,.T.); +#27100 = EDGE_LOOP('',(#27101,#27102,#27108,#27109)); +#27101 = ORIENTED_EDGE('',*,*,#26002,.T.); +#27102 = ORIENTED_EDGE('',*,*,#27103,.T.); +#27103 = EDGE_CURVE('',#26003,#26756,#27104,.T.); +#27104 = LINE('',#27105,#27106); +#27105 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#27106 = VECTOR('',#27107,1.); +#27107 = DIRECTION('',(0.,0.,-1.)); +#27108 = ORIENTED_EDGE('',*,*,#26755,.F.); +#27109 = ORIENTED_EDGE('',*,*,#26714,.F.); +#27110 = PLANE('',#27111); +#27111 = AXIS2_PLACEMENT_3D('',#27112,#27113,#27114); +#27112 = CARTESIAN_POINT('',(1.5,-1.13,0.6)); +#27113 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27114 = DIRECTION('',(0.,0.,-1.)); +#27115 = ADVANCED_FACE('',(#27116),#27154,.T.); +#27116 = FACE_BOUND('',#27117,.T.); +#27117 = EDGE_LOOP('',(#27118,#27119,#27120,#27121,#27122,#27123,#27131, + #27139,#27148)); +#27118 = ORIENTED_EDGE('',*,*,#27061,.T.); +#27119 = ORIENTED_EDGE('',*,*,#26706,.F.); +#27120 = ORIENTED_EDGE('',*,*,#26200,.T.); +#27121 = ORIENTED_EDGE('',*,*,#26161,.T.); +#27122 = ORIENTED_EDGE('',*,*,#27023,.T.); +#27123 = ORIENTED_EDGE('',*,*,#27124,.T.); +#27124 = EDGE_CURVE('',#27024,#27125,#27127,.T.); +#27125 = VERTEX_POINT('',#27126); +#27126 = CARTESIAN_POINT('',(1.225,-1.,1.2)); +#27127 = LINE('',#27128,#27129); +#27128 = CARTESIAN_POINT('',(1.225,-1.,1.08)); +#27129 = VECTOR('',#27130,1.); +#27130 = DIRECTION('',(0.,0.,1.)); +#27131 = ORIENTED_EDGE('',*,*,#27132,.T.); +#27132 = EDGE_CURVE('',#27125,#27133,#27135,.T.); +#27133 = VERTEX_POINT('',#27134); +#27134 = CARTESIAN_POINT('',(1.225,-1.13,1.2)); +#27135 = LINE('',#27136,#27137); +#27136 = CARTESIAN_POINT('',(1.225,-1.,1.2)); +#27137 = VECTOR('',#27138,1.); +#27138 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27139 = ORIENTED_EDGE('',*,*,#27140,.T.); +#27140 = EDGE_CURVE('',#27133,#27141,#27143,.T.); +#27141 = VERTEX_POINT('',#27142); +#27142 = CARTESIAN_POINT('',(1.225,-1.25,1.08)); +#27143 = CIRCLE('',#27144,0.12); +#27144 = AXIS2_PLACEMENT_3D('',#27145,#27146,#27147); +#27145 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#27146 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27147 = DIRECTION('',(8.217301096051E-31,3.700743415417E-15,1.)); +#27148 = ORIENTED_EDGE('',*,*,#27149,.T.); +#27149 = EDGE_CURVE('',#27141,#27054,#27150,.T.); +#27150 = LINE('',#27151,#27152); +#27151 = CARTESIAN_POINT('',(1.225,-1.25,1.08)); +#27152 = VECTOR('',#27153,1.); +#27153 = DIRECTION('',(0.,0.,-1.)); +#27154 = PLANE('',#27155); +#27155 = AXIS2_PLACEMENT_3D('',#27156,#27157,#27158); +#27156 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#27157 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27158 = DIRECTION('',(0.,0.,-1.)); +#27159 = ADVANCED_FACE('',(#27160),#27212,.T.); +#27160 = FACE_BOUND('',#27161,.F.); +#27161 = EDGE_LOOP('',(#27162,#27170,#27171,#27172,#27173,#27181,#27189, + #27197,#27206)); +#27162 = ORIENTED_EDGE('',*,*,#27163,.T.); +#27163 = EDGE_CURVE('',#27164,#26225,#27166,.T.); +#27164 = VERTEX_POINT('',#27165); +#27165 = CARTESIAN_POINT('',(-1.225,-1.25,0.63)); +#27166 = LINE('',#27167,#27168); +#27167 = CARTESIAN_POINT('',(-1.225,-1.25,0.63)); +#27168 = VECTOR('',#27169,1.); +#27169 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#27170 = ORIENTED_EDGE('',*,*,#26740,.F.); +#27171 = ORIENTED_EDGE('',*,*,#26184,.T.); +#27172 = ORIENTED_EDGE('',*,*,#26176,.T.); +#27173 = ORIENTED_EDGE('',*,*,#27174,.T.); +#27174 = EDGE_CURVE('',#25668,#27175,#27177,.T.); +#27175 = VERTEX_POINT('',#27176); +#27176 = CARTESIAN_POINT('',(-1.225,-1.,1.08)); +#27177 = LINE('',#27178,#27179); +#27178 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#27179 = VECTOR('',#27180,1.); +#27180 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27181 = ORIENTED_EDGE('',*,*,#27182,.T.); +#27182 = EDGE_CURVE('',#27175,#27183,#27185,.T.); +#27183 = VERTEX_POINT('',#27184); +#27184 = CARTESIAN_POINT('',(-1.225,-1.,1.2)); +#27185 = LINE('',#27186,#27187); +#27186 = CARTESIAN_POINT('',(-1.225,-1.,1.08)); +#27187 = VECTOR('',#27188,1.); +#27188 = DIRECTION('',(0.,0.,1.)); +#27189 = ORIENTED_EDGE('',*,*,#27190,.T.); +#27190 = EDGE_CURVE('',#27183,#27191,#27193,.T.); +#27191 = VERTEX_POINT('',#27192); +#27192 = CARTESIAN_POINT('',(-1.225,-1.13,1.2)); +#27193 = LINE('',#27194,#27195); +#27194 = CARTESIAN_POINT('',(-1.225,-1.,1.2)); +#27195 = VECTOR('',#27196,1.); +#27196 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27197 = ORIENTED_EDGE('',*,*,#27198,.T.); +#27198 = EDGE_CURVE('',#27191,#27199,#27201,.T.); +#27199 = VERTEX_POINT('',#27200); +#27200 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#27201 = CIRCLE('',#27202,0.12); +#27202 = AXIS2_PLACEMENT_3D('',#27203,#27204,#27205); +#27203 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#27204 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27205 = DIRECTION('',(8.217301096051E-31,3.700743415417E-15,1.)); +#27206 = ORIENTED_EDGE('',*,*,#27207,.T.); +#27207 = EDGE_CURVE('',#27199,#27164,#27208,.T.); +#27208 = LINE('',#27209,#27210); +#27209 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#27210 = VECTOR('',#27211,1.); +#27211 = DIRECTION('',(0.,0.,-1.)); +#27212 = PLANE('',#27213); +#27213 = AXIS2_PLACEMENT_3D('',#27214,#27215,#27216); +#27214 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#27215 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#27216 = DIRECTION('',(0.,0.,1.)); +#27217 = ADVANCED_FACE('',(#27218),#27235,.F.); +#27218 = FACE_BOUND('',#27219,.T.); +#27219 = EDGE_LOOP('',(#27220,#27226,#27227,#27228,#27234)); +#27220 = ORIENTED_EDGE('',*,*,#27221,.T.); +#27221 = EDGE_CURVE('',#26337,#27164,#27222,.T.); +#27222 = LINE('',#27223,#27224); +#27223 = CARTESIAN_POINT('',(-1.5,-1.25,0.63)); +#27224 = VECTOR('',#27225,1.); +#27225 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27226 = ORIENTED_EDGE('',*,*,#27163,.T.); +#27227 = ORIENTED_EDGE('',*,*,#26232,.T.); +#27228 = ORIENTED_EDGE('',*,*,#27229,.F.); +#27229 = EDGE_CURVE('',#26329,#26177,#27230,.T.); +#27230 = LINE('',#27231,#27232); +#27231 = CARTESIAN_POINT('',(-1.5,-1.1,1.08)); +#27232 = VECTOR('',#27233,1.); +#27233 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27234 = ORIENTED_EDGE('',*,*,#26336,.F.); +#27235 = PLANE('',#27236); +#27236 = AXIS2_PLACEMENT_3D('',#27237,#27238,#27239); +#27237 = CARTESIAN_POINT('',(-1.5,-1.25,0.63)); +#27238 = DIRECTION('',(2.106500081145E-16,0.948683298051,-0.316227766017 + )); +#27239 = DIRECTION('',(-7.021666937149E-17,-0.316227766017, + -0.948683298051)); +#27240 = ADVANCED_FACE('',(#27241),#27259,.F.); +#27241 = FACE_BOUND('',#27242,.F.); +#27242 = EDGE_LOOP('',(#27243,#27244,#27245,#27253)); +#27243 = ORIENTED_EDGE('',*,*,#26392,.F.); +#27244 = ORIENTED_EDGE('',*,*,#26377,.F.); +#27245 = ORIENTED_EDGE('',*,*,#27246,.T.); +#27246 = EDGE_CURVE('',#26370,#27247,#27249,.T.); +#27247 = VERTEX_POINT('',#27248); +#27248 = CARTESIAN_POINT('',(-2.,0.7,0.1)); +#27249 = LINE('',#27250,#27251); +#27250 = CARTESIAN_POINT('',(-1.4,0.7,0.1)); +#27251 = VECTOR('',#27252,1.); +#27252 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27253 = ORIENTED_EDGE('',*,*,#27254,.F.); +#27254 = EDGE_CURVE('',#26393,#27247,#27255,.T.); +#27255 = LINE('',#27256,#27257); +#27256 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#27257 = VECTOR('',#27258,1.); +#27258 = DIRECTION('',(0.,0.,1.)); +#27259 = PLANE('',#27260); +#27260 = AXIS2_PLACEMENT_3D('',#27261,#27262,#27263); +#27261 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#27262 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#27263 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27264 = ADVANCED_FACE('',(#27265),#27283,.T.); +#27265 = FACE_BOUND('',#27266,.T.); +#27266 = EDGE_LOOP('',(#27267,#27268,#27269,#27277)); +#27267 = ORIENTED_EDGE('',*,*,#26369,.F.); +#27268 = ORIENTED_EDGE('',*,*,#27246,.T.); +#27269 = ORIENTED_EDGE('',*,*,#27270,.T.); +#27270 = EDGE_CURVE('',#27247,#27271,#27273,.T.); +#27271 = VERTEX_POINT('',#27272); +#27272 = CARTESIAN_POINT('',(-2.,-0.7,0.1)); +#27273 = LINE('',#27274,#27275); +#27274 = CARTESIAN_POINT('',(-2.,0.7,0.1)); +#27275 = VECTOR('',#27276,1.); +#27276 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#27277 = ORIENTED_EDGE('',*,*,#27278,.T.); +#27278 = EDGE_CURVE('',#27271,#26362,#27279,.T.); +#27279 = LINE('',#27280,#27281); +#27280 = CARTESIAN_POINT('',(-2.,-0.7,0.1)); +#27281 = VECTOR('',#27282,1.); +#27282 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#27283 = PLANE('',#27284); +#27284 = AXIS2_PLACEMENT_3D('',#27285,#27286,#27287); +#27285 = CARTESIAN_POINT('',(-1.7,-3.673940397442E-17,0.1)); +#27286 = DIRECTION('',(0.,0.,1.)); +#27287 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27288 = ADVANCED_FACE('',(#27289),#27300,.F.); +#27289 = FACE_BOUND('',#27290,.F.); +#27290 = EDGE_LOOP('',(#27291,#27292,#27298,#27299)); +#27291 = ORIENTED_EDGE('',*,*,#26408,.F.); +#27292 = ORIENTED_EDGE('',*,*,#27293,.T.); +#27293 = EDGE_CURVE('',#26401,#27271,#27294,.T.); +#27294 = LINE('',#27295,#27296); +#27295 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#27296 = VECTOR('',#27297,1.); +#27297 = DIRECTION('',(0.,0.,1.)); +#27298 = ORIENTED_EDGE('',*,*,#27278,.T.); +#27299 = ORIENTED_EDGE('',*,*,#26361,.F.); +#27300 = PLANE('',#27301); +#27301 = AXIS2_PLACEMENT_3D('',#27302,#27303,#27304); +#27302 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#27303 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#27304 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#27305 = ADVANCED_FACE('',(#27306),#27317,.T.); +#27306 = FACE_BOUND('',#27307,.F.); +#27307 = EDGE_LOOP('',(#27308,#27309,#27315,#27316)); +#27308 = ORIENTED_EDGE('',*,*,#26352,.T.); +#27309 = ORIENTED_EDGE('',*,*,#27310,.T.); +#27310 = EDGE_CURVE('',#26345,#26678,#27311,.T.); +#27311 = LINE('',#27312,#27313); +#27312 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#27313 = VECTOR('',#27314,1.); +#27314 = DIRECTION('',(0.,0.,-1.)); +#27315 = ORIENTED_EDGE('',*,*,#26675,.F.); +#27316 = ORIENTED_EDGE('',*,*,#26732,.F.); +#27317 = PLANE('',#27318); +#27318 = AXIS2_PLACEMENT_3D('',#27319,#27320,#27321); +#27319 = CARTESIAN_POINT('',(-1.5,-1.13,0.6)); +#27320 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#27321 = DIRECTION('',(0.,0.,1.)); +#27322 = ADVANCED_FACE('',(#27323),#27341,.F.); +#27323 = FACE_BOUND('',#27324,.T.); +#27324 = EDGE_LOOP('',(#27325,#27333,#27339,#27340)); +#27325 = ORIENTED_EDGE('',*,*,#27326,.T.); +#27326 = EDGE_CURVE('',#26345,#27327,#27329,.T.); +#27327 = VERTEX_POINT('',#27328); +#27328 = CARTESIAN_POINT('',(-1.225,-1.25,0.6)); +#27329 = LINE('',#27330,#27331); +#27330 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#27331 = VECTOR('',#27332,1.); +#27332 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27333 = ORIENTED_EDGE('',*,*,#27334,.T.); +#27334 = EDGE_CURVE('',#27327,#27164,#27335,.T.); +#27335 = LINE('',#27336,#27337); +#27336 = CARTESIAN_POINT('',(-1.225,-1.25,0.6)); +#27337 = VECTOR('',#27338,1.); +#27338 = DIRECTION('',(0.,0.,1.)); +#27339 = ORIENTED_EDGE('',*,*,#27221,.F.); +#27340 = ORIENTED_EDGE('',*,*,#26344,.F.); +#27341 = PLANE('',#27342); +#27342 = AXIS2_PLACEMENT_3D('',#27343,#27344,#27345); +#27343 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#27344 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27345 = DIRECTION('',(0.,0.,-1.)); +#27346 = ADVANCED_FACE('',(#27347),#27378,.T.); +#27347 = FACE_BOUND('',#27348,.T.); +#27348 = EDGE_LOOP('',(#27349,#27350,#27358,#27364,#27372)); +#27349 = ORIENTED_EDGE('',*,*,#26312,.T.); +#27350 = ORIENTED_EDGE('',*,*,#27351,.F.); +#27351 = EDGE_CURVE('',#27352,#26313,#27354,.T.); +#27352 = VERTEX_POINT('',#27353); +#27353 = CARTESIAN_POINT('',(-1.225,1.,1.08)); +#27354 = LINE('',#27355,#27356); +#27355 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#27356 = VECTOR('',#27357,1.); +#27357 = DIRECTION('',(-1.,0.,0.)); +#27358 = ORIENTED_EDGE('',*,*,#27359,.F.); +#27359 = EDGE_CURVE('',#26509,#27352,#27360,.T.); +#27360 = LINE('',#27361,#27362); +#27361 = CARTESIAN_POINT('',(-1.225,1.25,1.08)); +#27362 = VECTOR('',#27363,1.); +#27363 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27364 = ORIENTED_EDGE('',*,*,#27365,.F.); +#27365 = EDGE_CURVE('',#27366,#26509,#27368,.T.); +#27366 = VERTEX_POINT('',#27367); +#27367 = CARTESIAN_POINT('',(-1.225,1.1,1.08)); +#27368 = LINE('',#27369,#27370); +#27369 = CARTESIAN_POINT('',(-1.225,1.1,1.08)); +#27370 = VECTOR('',#27371,1.); +#27371 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27372 = ORIENTED_EDGE('',*,*,#27373,.F.); +#27373 = EDGE_CURVE('',#26305,#27366,#27374,.T.); +#27374 = LINE('',#27375,#27376); +#27375 = CARTESIAN_POINT('',(-1.5,1.1,1.08)); +#27376 = VECTOR('',#27377,1.); +#27377 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27378 = PLANE('',#27379); +#27379 = AXIS2_PLACEMENT_3D('',#27380,#27381,#27382); +#27380 = CARTESIAN_POINT('',(0.,0.,1.08)); +#27381 = DIRECTION('',(0.,0.,1.)); +#27382 = DIRECTION('',(1.,0.,-0.)); +#27383 = ADVANCED_FACE('',(#27384),#27409,.F.); +#27384 = FACE_BOUND('',#27385,.F.); +#27385 = EDGE_LOOP('',(#27386,#27394,#27402,#27408)); +#27386 = ORIENTED_EDGE('',*,*,#27387,.T.); +#27387 = EDGE_CURVE('',#26313,#27388,#27390,.T.); +#27388 = VERTEX_POINT('',#27389); +#27389 = CARTESIAN_POINT('',(-1.5,1.,1.2)); +#27390 = LINE('',#27391,#27392); +#27391 = CARTESIAN_POINT('',(-1.5,1.,1.08)); +#27392 = VECTOR('',#27393,1.); +#27393 = DIRECTION('',(0.,0.,1.)); +#27394 = ORIENTED_EDGE('',*,*,#27395,.T.); +#27395 = EDGE_CURVE('',#27388,#27396,#27398,.T.); +#27396 = VERTEX_POINT('',#27397); +#27397 = CARTESIAN_POINT('',(-1.5,-1.,1.2)); +#27398 = LINE('',#27399,#27400); +#27399 = CARTESIAN_POINT('',(-1.5,1.,1.2)); +#27400 = VECTOR('',#27401,1.); +#27401 = DIRECTION('',(0.,-1.,0.)); +#27402 = ORIENTED_EDGE('',*,*,#27403,.F.); +#27403 = EDGE_CURVE('',#26321,#27396,#27404,.T.); +#27404 = LINE('',#27405,#27406); +#27405 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#27406 = VECTOR('',#27407,1.); +#27407 = DIRECTION('',(0.,0.,1.)); +#27408 = ORIENTED_EDGE('',*,*,#26320,.F.); +#27409 = PLANE('',#27410); +#27410 = AXIS2_PLACEMENT_3D('',#27411,#27412,#27413); +#27411 = CARTESIAN_POINT('',(-1.5,1.,1.08)); +#27412 = DIRECTION('',(1.,0.,0.)); +#27413 = DIRECTION('',(0.,-1.,0.)); +#27414 = ADVANCED_FACE('',(#27415),#27427,.T.); +#27415 = FACE_BOUND('',#27416,.T.); +#27416 = EDGE_LOOP('',(#27417,#27418,#27419,#27425,#27426)); +#27417 = ORIENTED_EDGE('',*,*,#26176,.T.); +#27418 = ORIENTED_EDGE('',*,*,#27174,.T.); +#27419 = ORIENTED_EDGE('',*,*,#27420,.F.); +#27420 = EDGE_CURVE('',#26321,#27175,#27421,.T.); +#27421 = LINE('',#27422,#27423); +#27422 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#27423 = VECTOR('',#27424,1.); +#27424 = DIRECTION('',(1.,0.,0.)); +#27425 = ORIENTED_EDGE('',*,*,#26328,.T.); +#27426 = ORIENTED_EDGE('',*,*,#27229,.T.); +#27427 = PLANE('',#27428); +#27428 = AXIS2_PLACEMENT_3D('',#27429,#27430,#27431); +#27429 = CARTESIAN_POINT('',(0.,0.,1.08)); +#27430 = DIRECTION('',(0.,0.,1.)); +#27431 = DIRECTION('',(1.,0.,-0.)); +#27432 = ADVANCED_FACE('',(#27433),#27459,.F.); +#27433 = FACE_BOUND('',#27434,.F.); +#27434 = EDGE_LOOP('',(#27435,#27443,#27451,#27457,#27458)); +#27435 = ORIENTED_EDGE('',*,*,#27436,.T.); +#27436 = EDGE_CURVE('',#26297,#27437,#27439,.T.); +#27437 = VERTEX_POINT('',#27438); +#27438 = CARTESIAN_POINT('',(-1.225,1.25,0.63)); +#27439 = LINE('',#27440,#27441); +#27440 = CARTESIAN_POINT('',(-1.5,1.25,0.63)); +#27441 = VECTOR('',#27442,1.); +#27442 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27443 = ORIENTED_EDGE('',*,*,#27444,.T.); +#27444 = EDGE_CURVE('',#27437,#27445,#27447,.T.); +#27445 = VERTEX_POINT('',#27446); +#27446 = CARTESIAN_POINT('',(-1.225,1.13,0.99)); +#27447 = LINE('',#27448,#27449); +#27448 = CARTESIAN_POINT('',(-1.225,1.25,0.63)); +#27449 = VECTOR('',#27450,1.); +#27450 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#27451 = ORIENTED_EDGE('',*,*,#27452,.T.); +#27452 = EDGE_CURVE('',#27445,#27366,#27453,.T.); +#27453 = LINE('',#27454,#27455); +#27454 = CARTESIAN_POINT('',(-1.225,1.25,0.63)); +#27455 = VECTOR('',#27456,1.); +#27456 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#27457 = ORIENTED_EDGE('',*,*,#27373,.F.); +#27458 = ORIENTED_EDGE('',*,*,#26304,.F.); +#27459 = PLANE('',#27460); +#27460 = AXIS2_PLACEMENT_3D('',#27461,#27462,#27463); +#27461 = CARTESIAN_POINT('',(-1.5,1.25,0.63)); +#27462 = DIRECTION('',(-1.053250040572E-16,-0.948683298051, + -0.316227766017)); +#27463 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#27464 = ADVANCED_FACE('',(#27465),#27483,.F.); +#27465 = FACE_BOUND('',#27466,.F.); +#27466 = EDGE_LOOP('',(#27467,#27475,#27481,#27482)); +#27467 = ORIENTED_EDGE('',*,*,#27468,.T.); +#27468 = EDGE_CURVE('',#26289,#27469,#27471,.T.); +#27469 = VERTEX_POINT('',#27470); +#27470 = CARTESIAN_POINT('',(-1.225,1.25,0.6)); +#27471 = LINE('',#27472,#27473); +#27472 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#27473 = VECTOR('',#27474,1.); +#27474 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27475 = ORIENTED_EDGE('',*,*,#27476,.T.); +#27476 = EDGE_CURVE('',#27469,#27437,#27477,.T.); +#27477 = LINE('',#27478,#27479); +#27478 = CARTESIAN_POINT('',(-1.225,1.25,0.6)); +#27479 = VECTOR('',#27480,1.); +#27480 = DIRECTION('',(0.,0.,1.)); +#27481 = ORIENTED_EDGE('',*,*,#27436,.F.); +#27482 = ORIENTED_EDGE('',*,*,#26296,.F.); +#27483 = PLANE('',#27484); +#27484 = AXIS2_PLACEMENT_3D('',#27485,#27486,#27487); +#27485 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#27486 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27487 = DIRECTION('',(0.,0.,1.)); +#27488 = ADVANCED_FACE('',(#27489),#27507,.F.); +#27489 = FACE_BOUND('',#27490,.F.); +#27490 = EDGE_LOOP('',(#27491,#27492,#27493,#27501)); +#27491 = ORIENTED_EDGE('',*,*,#26280,.F.); +#27492 = ORIENTED_EDGE('',*,*,#26524,.T.); +#27493 = ORIENTED_EDGE('',*,*,#27494,.T.); +#27494 = EDGE_CURVE('',#26517,#27495,#27497,.T.); +#27495 = VERTEX_POINT('',#27496); +#27496 = CARTESIAN_POINT('',(-1.225,1.13,0.6)); +#27497 = LINE('',#27498,#27499); +#27498 = CARTESIAN_POINT('',(-1.225,1.05,0.6)); +#27499 = VECTOR('',#27500,1.); +#27500 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27501 = ORIENTED_EDGE('',*,*,#27502,.T.); +#27502 = EDGE_CURVE('',#27495,#26281,#27503,.T.); +#27503 = LINE('',#27504,#27505); +#27504 = CARTESIAN_POINT('',(-1.225,1.13,0.6)); +#27505 = VECTOR('',#27506,1.); +#27506 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27507 = PLANE('',#27508); +#27508 = AXIS2_PLACEMENT_3D('',#27509,#27510,#27511); +#27509 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#27510 = DIRECTION('',(0.,0.,1.)); +#27511 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#27512 = ADVANCED_FACE('',(#27513),#27538,.T.); +#27513 = FACE_BOUND('',#27514,.T.); +#27514 = EDGE_LOOP('',(#27515,#27516,#27524,#27532)); +#27515 = ORIENTED_EDGE('',*,*,#26288,.T.); +#27516 = ORIENTED_EDGE('',*,*,#27517,.T.); +#27517 = EDGE_CURVE('',#26289,#27518,#27520,.T.); +#27518 = VERTEX_POINT('',#27519); +#27519 = CARTESIAN_POINT('',(-1.5,1.25,0.1)); +#27520 = LINE('',#27521,#27522); +#27521 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#27522 = VECTOR('',#27523,1.); +#27523 = DIRECTION('',(0.,0.,-1.)); +#27524 = ORIENTED_EDGE('',*,*,#27525,.F.); +#27525 = EDGE_CURVE('',#27526,#27518,#27528,.T.); +#27526 = VERTEX_POINT('',#27527); +#27527 = CARTESIAN_POINT('',(-1.5,1.13,0.1)); +#27528 = LINE('',#27529,#27530); +#27529 = CARTESIAN_POINT('',(-1.5,1.13,0.1)); +#27530 = VECTOR('',#27531,1.); +#27531 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27532 = ORIENTED_EDGE('',*,*,#27533,.F.); +#27533 = EDGE_CURVE('',#26281,#27526,#27534,.T.); +#27534 = LINE('',#27535,#27536); +#27535 = CARTESIAN_POINT('',(-1.5,1.13,0.6)); +#27536 = VECTOR('',#27537,1.); +#27537 = DIRECTION('',(0.,0.,-1.)); +#27538 = PLANE('',#27539); +#27539 = AXIS2_PLACEMENT_3D('',#27540,#27541,#27542); +#27540 = CARTESIAN_POINT('',(-1.5,1.13,0.6)); +#27541 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27542 = DIRECTION('',(0.,0.,-1.)); +#27543 = ADVANCED_FACE('',(#27544),#27550,.F.); +#27544 = FACE_BOUND('',#27545,.F.); +#27545 = EDGE_LOOP('',(#27546,#27547,#27548,#27549)); +#27546 = ORIENTED_EDGE('',*,*,#27254,.T.); +#27547 = ORIENTED_EDGE('',*,*,#27270,.T.); +#27548 = ORIENTED_EDGE('',*,*,#27293,.F.); +#27549 = ORIENTED_EDGE('',*,*,#26400,.F.); +#27550 = PLANE('',#27551); +#27551 = AXIS2_PLACEMENT_3D('',#27552,#27553,#27554); +#27552 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#27553 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#27554 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#27555 = ADVANCED_FACE('',(#27556),#27577,.F.); +#27556 = FACE_BOUND('',#27557,.F.); +#27557 = EDGE_LOOP('',(#27558,#27559,#27560,#27561,#27562,#27563,#27564, + #27565,#27566,#27567,#27568,#27569,#27570,#27571)); +#27558 = ORIENTED_EDGE('',*,*,#27149,.T.); +#27559 = ORIENTED_EDGE('',*,*,#27086,.F.); +#27560 = ORIENTED_EDGE('',*,*,#27078,.F.); +#27561 = ORIENTED_EDGE('',*,*,#27103,.T.); +#27562 = ORIENTED_EDGE('',*,*,#26763,.T.); +#27563 = ORIENTED_EDGE('',*,*,#26442,.T.); +#27564 = ORIENTED_EDGE('',*,*,#26434,.F.); +#27565 = ORIENTED_EDGE('',*,*,#26426,.F.); +#27566 = ORIENTED_EDGE('',*,*,#26685,.F.); +#27567 = ORIENTED_EDGE('',*,*,#27310,.F.); +#27568 = ORIENTED_EDGE('',*,*,#27326,.T.); +#27569 = ORIENTED_EDGE('',*,*,#27334,.T.); +#27570 = ORIENTED_EDGE('',*,*,#27207,.F.); +#27571 = ORIENTED_EDGE('',*,*,#27572,.T.); +#27572 = EDGE_CURVE('',#27199,#27141,#27573,.T.); +#27573 = LINE('',#27574,#27575); +#27574 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#27575 = VECTOR('',#27576,1.); +#27576 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27577 = PLANE('',#27578); +#27578 = AXIS2_PLACEMENT_3D('',#27579,#27580,#27581); +#27579 = CARTESIAN_POINT('',(0.816633064516,-1.25,0.656633064516)); +#27580 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27581 = DIRECTION('',(0.,0.,-1.)); +#27582 = ADVANCED_FACE('',(#27583),#27589,.F.); +#27583 = FACE_BOUND('',#27584,.F.); +#27584 = EDGE_LOOP('',(#27585,#27586,#27587,#27588)); +#27585 = ORIENTED_EDGE('',*,*,#26789,.T.); +#27586 = ORIENTED_EDGE('',*,*,#26805,.T.); +#27587 = ORIENTED_EDGE('',*,*,#26828,.F.); +#27588 = ORIENTED_EDGE('',*,*,#26466,.F.); +#27589 = PLANE('',#27590); +#27590 = AXIS2_PLACEMENT_3D('',#27591,#27592,#27593); +#27591 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#27592 = DIRECTION('',(-1.,0.,0.)); +#27593 = DIRECTION('',(0.,1.,0.)); +#27594 = ADVANCED_FACE('',(#27595),#27606,.T.); +#27595 = FACE_BOUND('',#27596,.T.); +#27596 = EDGE_LOOP('',(#27597,#27598,#27599,#27600)); +#27597 = ORIENTED_EDGE('',*,*,#26642,.F.); +#27598 = ORIENTED_EDGE('',*,*,#26540,.T.); +#27599 = ORIENTED_EDGE('',*,*,#26562,.T.); +#27600 = ORIENTED_EDGE('',*,*,#27601,.F.); +#27601 = EDGE_CURVE('',#26643,#26563,#27602,.T.); +#27602 = LINE('',#27603,#27604); +#27603 = CARTESIAN_POINT('',(-0.925,1.13,0.6)); +#27604 = VECTOR('',#27605,1.); +#27605 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27606 = PLANE('',#27607); +#27607 = AXIS2_PLACEMENT_3D('',#27608,#27609,#27610); +#27608 = CARTESIAN_POINT('',(-0.925,1.05,0.6)); +#27609 = DIRECTION('',(0.,0.,1.)); +#27610 = DIRECTION('',(1.,0.,-0.)); +#27611 = ADVANCED_FACE('',(#27612),#27624,.T.); +#27612 = FACE_BOUND('',#27613,.T.); +#27613 = EDGE_LOOP('',(#27614,#27615,#27616,#27622,#27623)); +#27614 = ORIENTED_EDGE('',*,*,#26516,.T.); +#27615 = ORIENTED_EDGE('',*,*,#27494,.T.); +#27616 = ORIENTED_EDGE('',*,*,#27617,.F.); +#27617 = EDGE_CURVE('',#27445,#27495,#27618,.T.); +#27618 = LINE('',#27619,#27620); +#27619 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#27620 = VECTOR('',#27621,1.); +#27621 = DIRECTION('',(0.,0.,-1.)); +#27622 = ORIENTED_EDGE('',*,*,#27452,.T.); +#27623 = ORIENTED_EDGE('',*,*,#27365,.T.); +#27624 = PLANE('',#27625); +#27625 = AXIS2_PLACEMENT_3D('',#27626,#27627,#27628); +#27626 = CARTESIAN_POINT('',(-1.225,1.120112441071,0.81113046028)); +#27627 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27628 = DIRECTION('',(0.,0.,-1.)); +#27629 = ADVANCED_FACE('',(#27630),#27657,.F.); +#27630 = FACE_BOUND('',#27631,.F.); +#27631 = EDGE_LOOP('',(#27632,#27633,#27634,#27635,#27643,#27651)); +#27632 = ORIENTED_EDGE('',*,*,#27365,.T.); +#27633 = ORIENTED_EDGE('',*,*,#26508,.F.); +#27634 = ORIENTED_EDGE('',*,*,#26972,.F.); +#27635 = ORIENTED_EDGE('',*,*,#27636,.F.); +#27636 = EDGE_CURVE('',#27637,#26940,#27639,.T.); +#27637 = VERTEX_POINT('',#27638); +#27638 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#27639 = LINE('',#27640,#27641); +#27640 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#27641 = VECTOR('',#27642,1.); +#27642 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#27643 = ORIENTED_EDGE('',*,*,#27644,.T.); +#27644 = EDGE_CURVE('',#27637,#27645,#27647,.T.); +#27645 = VERTEX_POINT('',#27646); +#27646 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#27647 = LINE('',#27648,#27649); +#27648 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#27649 = VECTOR('',#27650,1.); +#27650 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27651 = ORIENTED_EDGE('',*,*,#27652,.T.); +#27652 = EDGE_CURVE('',#27645,#27366,#27653,.T.); +#27653 = LINE('',#27654,#27655); +#27654 = CARTESIAN_POINT('',(-1.225,1.25,1.08)); +#27655 = VECTOR('',#27656,1.); +#27656 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#27657 = PLANE('',#27658); +#27658 = AXIS2_PLACEMENT_3D('',#27659,#27660,#27661); +#27659 = CARTESIAN_POINT('',(0.,0.,1.08)); +#27660 = DIRECTION('',(0.,0.,1.)); +#27661 = DIRECTION('',(1.,0.,-0.)); +#27662 = ADVANCED_FACE('',(#27663),#27675,.T.); +#27663 = FACE_BOUND('',#27664,.F.); +#27664 = EDGE_LOOP('',(#27665,#27666,#27667,#27673,#27674)); +#27665 = ORIENTED_EDGE('',*,*,#26500,.T.); +#27666 = ORIENTED_EDGE('',*,*,#26846,.T.); +#27667 = ORIENTED_EDGE('',*,*,#27668,.F.); +#27668 = EDGE_CURVE('',#26932,#26847,#27669,.T.); +#27669 = LINE('',#27670,#27671); +#27670 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#27671 = VECTOR('',#27672,1.); +#27672 = DIRECTION('',(0.,0.,-1.)); +#27673 = ORIENTED_EDGE('',*,*,#26939,.T.); +#27674 = ORIENTED_EDGE('',*,*,#26972,.T.); +#27675 = PLANE('',#27676); +#27676 = AXIS2_PLACEMENT_3D('',#27677,#27678,#27679); +#27677 = CARTESIAN_POINT('',(1.225,1.120112441071,0.81113046028)); +#27678 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27679 = DIRECTION('',(0.,0.,1.)); +#27680 = ADVANCED_FACE('',(#27681),#27717,.T.); +#27681 = FACE_BOUND('',#27682,.T.); +#27682 = EDGE_LOOP('',(#27683,#27689,#27690,#27691,#27692,#27698,#27699, + #27700,#27701,#27707,#27708,#27709,#27710,#27716)); +#27683 = ORIENTED_EDGE('',*,*,#27684,.T.); +#27684 = EDGE_CURVE('',#27645,#27445,#27685,.T.); +#27685 = LINE('',#27686,#27687); +#27686 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#27687 = VECTOR('',#27688,1.); +#27688 = DIRECTION('',(0.,0.,-1.)); +#27689 = ORIENTED_EDGE('',*,*,#27617,.T.); +#27690 = ORIENTED_EDGE('',*,*,#27502,.T.); +#27691 = ORIENTED_EDGE('',*,*,#27533,.T.); +#27692 = ORIENTED_EDGE('',*,*,#27693,.T.); +#27693 = EDGE_CURVE('',#27526,#26654,#27694,.T.); +#27694 = LINE('',#27695,#27696); +#27695 = CARTESIAN_POINT('',(-1.5,1.13,0.1)); +#27696 = VECTOR('',#27697,1.); +#27697 = DIRECTION('',(1.,-1.110223024625E-16,4.827056628805E-17)); +#27698 = ORIENTED_EDGE('',*,*,#26661,.T.); +#27699 = ORIENTED_EDGE('',*,*,#27601,.T.); +#27700 = ORIENTED_EDGE('',*,*,#26588,.F.); +#27701 = ORIENTED_EDGE('',*,*,#27702,.F.); +#27702 = EDGE_CURVE('',#26878,#26581,#27703,.T.); +#27703 = LINE('',#27704,#27705); +#27704 = CARTESIAN_POINT('',(1.5,1.13,0.1)); +#27705 = VECTOR('',#27706,1.); +#27706 = DIRECTION('',(-1.,1.110223024625E-16,4.827056628805E-17)); +#27707 = ORIENTED_EDGE('',*,*,#26885,.F.); +#27708 = ORIENTED_EDGE('',*,*,#26854,.F.); +#27709 = ORIENTED_EDGE('',*,*,#27668,.F.); +#27710 = ORIENTED_EDGE('',*,*,#27711,.F.); +#27711 = EDGE_CURVE('',#27637,#26932,#27712,.T.); +#27712 = LINE('',#27713,#27714); +#27713 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#27714 = VECTOR('',#27715,1.); +#27715 = DIRECTION('',(0.,0.,-1.)); +#27716 = ORIENTED_EDGE('',*,*,#27644,.T.); +#27717 = PLANE('',#27718); +#27718 = AXIS2_PLACEMENT_3D('',#27719,#27720,#27721); +#27719 = CARTESIAN_POINT('',(-0.816633064516,1.13,0.656633064516)); +#27720 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#27721 = DIRECTION('',(0.,0.,-1.)); +#27722 = ADVANCED_FACE('',(#27723),#27734,.T.); +#27723 = FACE_BOUND('',#27724,.F.); +#27724 = EDGE_LOOP('',(#27725,#27726,#27732,#27733)); +#27725 = ORIENTED_EDGE('',*,*,#26877,.T.); +#27726 = ORIENTED_EDGE('',*,*,#27727,.T.); +#27727 = EDGE_CURVE('',#26870,#26573,#27728,.T.); +#27728 = LINE('',#27729,#27730); +#27729 = CARTESIAN_POINT('',(1.5,1.25,0.1)); +#27730 = VECTOR('',#27731,1.); +#27731 = DIRECTION('',(-1.,1.110223024625E-16,4.827056628805E-17)); +#27732 = ORIENTED_EDGE('',*,*,#26580,.F.); +#27733 = ORIENTED_EDGE('',*,*,#27702,.F.); +#27734 = PLANE('',#27735); +#27735 = AXIS2_PLACEMENT_3D('',#27736,#27737,#27738); +#27736 = CARTESIAN_POINT('',(1.5,1.13,0.1)); +#27737 = DIRECTION('',(-4.827056628805E-17,5.359109410469E-33,-1.)); +#27738 = DIRECTION('',(1.,-1.110223024625E-16,-4.827056628805E-17)); +#27739 = ADVANCED_FACE('',(#27740),#27780,.F.); +#27740 = FACE_BOUND('',#27741,.F.); +#27741 = EDGE_LOOP('',(#27742,#27750,#27751,#27752,#27753,#27759,#27760, + #27761,#27762,#27763,#27764,#27765,#27766,#27774)); +#27742 = ORIENTED_EDGE('',*,*,#27743,.T.); +#27743 = EDGE_CURVE('',#27744,#27437,#27746,.T.); +#27744 = VERTEX_POINT('',#27745); +#27745 = CARTESIAN_POINT('',(-1.225,1.25,1.08)); +#27746 = LINE('',#27747,#27748); +#27747 = CARTESIAN_POINT('',(-1.225,1.25,1.08)); +#27748 = VECTOR('',#27749,1.); +#27749 = DIRECTION('',(0.,0.,-1.)); +#27750 = ORIENTED_EDGE('',*,*,#27476,.F.); +#27751 = ORIENTED_EDGE('',*,*,#27468,.F.); +#27752 = ORIENTED_EDGE('',*,*,#27517,.T.); +#27753 = ORIENTED_EDGE('',*,*,#27754,.T.); +#27754 = EDGE_CURVE('',#27518,#26604,#27755,.T.); +#27755 = LINE('',#27756,#27757); +#27756 = CARTESIAN_POINT('',(-1.5,1.25,0.1)); +#27757 = VECTOR('',#27758,1.); +#27758 = DIRECTION('',(1.,-1.110223024625E-16,4.827056628805E-17)); +#27759 = ORIENTED_EDGE('',*,*,#26611,.T.); +#27760 = ORIENTED_EDGE('',*,*,#26619,.T.); +#27761 = ORIENTED_EDGE('',*,*,#26627,.F.); +#27762 = ORIENTED_EDGE('',*,*,#27727,.F.); +#27763 = ORIENTED_EDGE('',*,*,#26869,.F.); +#27764 = ORIENTED_EDGE('',*,*,#26899,.T.); +#27765 = ORIENTED_EDGE('',*,*,#26907,.T.); +#27766 = ORIENTED_EDGE('',*,*,#27767,.F.); +#27767 = EDGE_CURVE('',#27768,#26908,#27770,.T.); +#27768 = VERTEX_POINT('',#27769); +#27769 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#27770 = LINE('',#27771,#27772); +#27771 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#27772 = VECTOR('',#27773,1.); +#27773 = DIRECTION('',(0.,0.,-1.)); +#27774 = ORIENTED_EDGE('',*,*,#27775,.T.); +#27775 = EDGE_CURVE('',#27768,#27744,#27776,.T.); +#27776 = LINE('',#27777,#27778); +#27777 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#27778 = VECTOR('',#27779,1.); +#27779 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27780 = PLANE('',#27781); +#27781 = AXIS2_PLACEMENT_3D('',#27782,#27783,#27784); +#27782 = CARTESIAN_POINT('',(-0.816633064516,1.25,0.656633064516)); +#27783 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#27784 = DIRECTION('',(0.,0.,-1.)); +#27785 = ADVANCED_FACE('',(#27786),#27792,.T.); +#27786 = FACE_BOUND('',#27787,.T.); +#27787 = EDGE_LOOP('',(#27788,#27789,#27790,#27791)); +#27788 = ORIENTED_EDGE('',*,*,#27525,.T.); +#27789 = ORIENTED_EDGE('',*,*,#27754,.T.); +#27790 = ORIENTED_EDGE('',*,*,#26653,.F.); +#27791 = ORIENTED_EDGE('',*,*,#27693,.F.); +#27792 = PLANE('',#27793); +#27793 = AXIS2_PLACEMENT_3D('',#27794,#27795,#27796); +#27794 = CARTESIAN_POINT('',(-1.5,1.13,0.1)); +#27795 = DIRECTION('',(4.827056628805E-17,-5.359109410469E-33,-1.)); +#27796 = DIRECTION('',(1.,-1.110223024625E-16,4.827056628805E-17)); +#27797 = ADVANCED_FACE('',(#27798),#27829,.T.); +#27798 = FACE_BOUND('',#27799,.F.); +#27799 = EDGE_LOOP('',(#27800,#27801,#27802,#27803,#27804,#27805,#27813, + #27821,#27828)); +#27800 = ORIENTED_EDGE('',*,*,#26931,.T.); +#27801 = ORIENTED_EDGE('',*,*,#27711,.F.); +#27802 = ORIENTED_EDGE('',*,*,#27636,.T.); +#27803 = ORIENTED_EDGE('',*,*,#26972,.T.); +#27804 = ORIENTED_EDGE('',*,*,#26978,.T.); +#27805 = ORIENTED_EDGE('',*,*,#27806,.T.); +#27806 = EDGE_CURVE('',#26963,#27807,#27809,.T.); +#27807 = VERTEX_POINT('',#27808); +#27808 = CARTESIAN_POINT('',(1.225,1.,1.2)); +#27809 = LINE('',#27810,#27811); +#27810 = CARTESIAN_POINT('',(1.225,1.,1.08)); +#27811 = VECTOR('',#27812,1.); +#27812 = DIRECTION('',(0.,0.,1.)); +#27813 = ORIENTED_EDGE('',*,*,#27814,.T.); +#27814 = EDGE_CURVE('',#27807,#27815,#27817,.T.); +#27815 = VERTEX_POINT('',#27816); +#27816 = CARTESIAN_POINT('',(1.225,1.13,1.2)); +#27817 = LINE('',#27818,#27819); +#27818 = CARTESIAN_POINT('',(1.225,1.,1.2)); +#27819 = VECTOR('',#27820,1.); +#27820 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27821 = ORIENTED_EDGE('',*,*,#27822,.T.); +#27822 = EDGE_CURVE('',#27815,#27768,#27823,.T.); +#27823 = CIRCLE('',#27824,0.12); +#27824 = AXIS2_PLACEMENT_3D('',#27825,#27826,#27827); +#27825 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#27826 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27827 = DIRECTION('',(-4.108650548025E-31,-3.700743415417E-15,1.)); +#27828 = ORIENTED_EDGE('',*,*,#27767,.T.); +#27829 = PLANE('',#27830); +#27830 = AXIS2_PLACEMENT_3D('',#27831,#27832,#27833); +#27831 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#27832 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#27833 = DIRECTION('',(0.,0.,1.)); +#27834 = ADVANCED_FACE('',(#27835),#27846,.F.); +#27835 = FACE_BOUND('',#27836,.F.); +#27836 = EDGE_LOOP('',(#27837,#27838,#27839,#27845)); +#27837 = ORIENTED_EDGE('',*,*,#26962,.F.); +#27838 = ORIENTED_EDGE('',*,*,#27008,.T.); +#27839 = ORIENTED_EDGE('',*,*,#27840,.T.); +#27840 = EDGE_CURVE('',#27001,#27807,#27841,.T.); +#27841 = LINE('',#27842,#27843); +#27842 = CARTESIAN_POINT('',(1.5,1.,1.2)); +#27843 = VECTOR('',#27844,1.); +#27844 = DIRECTION('',(-1.,0.,0.)); +#27845 = ORIENTED_EDGE('',*,*,#27806,.F.); +#27846 = PLANE('',#27847); +#27847 = AXIS2_PLACEMENT_3D('',#27848,#27849,#27850); +#27848 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#27849 = DIRECTION('',(0.,-1.,0.)); +#27850 = DIRECTION('',(-1.,0.,0.)); +#27851 = ADVANCED_FACE('',(#27852),#27863,.F.); +#27852 = FACE_BOUND('',#27853,.F.); +#27853 = EDGE_LOOP('',(#27854,#27855,#27856,#27862)); +#27854 = ORIENTED_EDGE('',*,*,#27039,.F.); +#27855 = ORIENTED_EDGE('',*,*,#27124,.T.); +#27856 = ORIENTED_EDGE('',*,*,#27857,.T.); +#27857 = EDGE_CURVE('',#27125,#26993,#27858,.T.); +#27858 = LINE('',#27859,#27860); +#27859 = CARTESIAN_POINT('',(-1.5,-1.,1.2)); +#27860 = VECTOR('',#27861,1.); +#27861 = DIRECTION('',(1.,0.,0.)); +#27862 = ORIENTED_EDGE('',*,*,#26992,.F.); +#27863 = PLANE('',#27864); +#27864 = AXIS2_PLACEMENT_3D('',#27865,#27866,#27867); +#27865 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#27866 = DIRECTION('',(0.,1.,0.)); +#27867 = DIRECTION('',(1.,0.,0.)); +#27868 = ADVANCED_FACE('',(#27869,#27912),#27923,.T.); +#27869 = FACE_BOUND('',#27870,.T.); +#27870 = EDGE_LOOP('',(#27871,#27877,#27878,#27884,#27885,#27886,#27887, + #27888,#27889,#27897,#27905,#27911)); +#27871 = ORIENTED_EDGE('',*,*,#27872,.T.); +#27872 = EDGE_CURVE('',#27396,#27183,#27873,.T.); +#27873 = LINE('',#27874,#27875); +#27874 = CARTESIAN_POINT('',(-1.5,-1.,1.2)); +#27875 = VECTOR('',#27876,1.); +#27876 = DIRECTION('',(1.,0.,0.)); +#27877 = ORIENTED_EDGE('',*,*,#27190,.T.); +#27878 = ORIENTED_EDGE('',*,*,#27879,.T.); +#27879 = EDGE_CURVE('',#27191,#27133,#27880,.T.); +#27880 = LINE('',#27881,#27882); +#27881 = CARTESIAN_POINT('',(-1.225,-1.13,1.2)); +#27882 = VECTOR('',#27883,1.); +#27883 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27884 = ORIENTED_EDGE('',*,*,#27132,.F.); +#27885 = ORIENTED_EDGE('',*,*,#27857,.T.); +#27886 = ORIENTED_EDGE('',*,*,#27000,.T.); +#27887 = ORIENTED_EDGE('',*,*,#27840,.T.); +#27888 = ORIENTED_EDGE('',*,*,#27814,.T.); +#27889 = ORIENTED_EDGE('',*,*,#27890,.T.); +#27890 = EDGE_CURVE('',#27815,#27891,#27893,.T.); +#27891 = VERTEX_POINT('',#27892); +#27892 = CARTESIAN_POINT('',(-1.225,1.13,1.2)); +#27893 = LINE('',#27894,#27895); +#27894 = CARTESIAN_POINT('',(1.225,1.13,1.2)); +#27895 = VECTOR('',#27896,1.); +#27896 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27897 = ORIENTED_EDGE('',*,*,#27898,.F.); +#27898 = EDGE_CURVE('',#27899,#27891,#27901,.T.); +#27899 = VERTEX_POINT('',#27900); +#27900 = CARTESIAN_POINT('',(-1.225,1.,1.2)); +#27901 = LINE('',#27902,#27903); +#27902 = CARTESIAN_POINT('',(-1.225,1.,1.2)); +#27903 = VECTOR('',#27904,1.); +#27904 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27905 = ORIENTED_EDGE('',*,*,#27906,.T.); +#27906 = EDGE_CURVE('',#27899,#27388,#27907,.T.); +#27907 = LINE('',#27908,#27909); +#27908 = CARTESIAN_POINT('',(1.5,1.,1.2)); +#27909 = VECTOR('',#27910,1.); +#27910 = DIRECTION('',(-1.,0.,0.)); +#27911 = ORIENTED_EDGE('',*,*,#27395,.T.); +#27912 = FACE_BOUND('',#27913,.T.); +#27913 = EDGE_LOOP('',(#27914)); +#27914 = ORIENTED_EDGE('',*,*,#27915,.F.); +#27915 = EDGE_CURVE('',#27916,#27916,#27918,.T.); +#27916 = VERTEX_POINT('',#27917); +#27917 = CARTESIAN_POINT('',(0.8,0.,1.2)); +#27918 = CIRCLE('',#27919,0.8); +#27919 = AXIS2_PLACEMENT_3D('',#27920,#27921,#27922); +#27920 = CARTESIAN_POINT('',(0.,0.,1.2)); +#27921 = DIRECTION('',(0.,0.,1.)); +#27922 = DIRECTION('',(1.,0.,-0.)); +#27923 = PLANE('',#27924); +#27924 = AXIS2_PLACEMENT_3D('',#27925,#27926,#27927); +#27925 = CARTESIAN_POINT('',(0.,0.,1.2)); +#27926 = DIRECTION('',(0.,0.,1.)); +#27927 = DIRECTION('',(1.,0.,-0.)); +#27928 = ADVANCED_FACE('',(#27929),#27935,.T.); +#27929 = FACE_BOUND('',#27930,.T.); +#27930 = EDGE_LOOP('',(#27931,#27932,#27933,#27934)); +#27931 = ORIENTED_EDGE('',*,*,#27879,.F.); +#27932 = ORIENTED_EDGE('',*,*,#27198,.T.); +#27933 = ORIENTED_EDGE('',*,*,#27572,.T.); +#27934 = ORIENTED_EDGE('',*,*,#27140,.F.); +#27935 = CYLINDRICAL_SURFACE('',#27936,0.12); +#27936 = AXIS2_PLACEMENT_3D('',#27937,#27938,#27939); +#27937 = CARTESIAN_POINT('',(0.6125,-1.13,1.08)); +#27938 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27939 = DIRECTION('',(8.217301096051E-31,3.700743415417E-15,1.)); +#27940 = ADVANCED_FACE('',(#27941),#27947,.F.); +#27941 = FACE_BOUND('',#27942,.F.); +#27942 = EDGE_LOOP('',(#27943,#27944,#27945,#27946)); +#27943 = ORIENTED_EDGE('',*,*,#27420,.F.); +#27944 = ORIENTED_EDGE('',*,*,#27403,.T.); +#27945 = ORIENTED_EDGE('',*,*,#27872,.T.); +#27946 = ORIENTED_EDGE('',*,*,#27182,.F.); +#27947 = PLANE('',#27948); +#27948 = AXIS2_PLACEMENT_3D('',#27949,#27950,#27951); +#27949 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#27950 = DIRECTION('',(0.,1.,0.)); +#27951 = DIRECTION('',(1.,0.,0.)); +#27952 = ADVANCED_FACE('',(#27953),#27975,.T.); +#27953 = FACE_BOUND('',#27954,.T.); +#27954 = EDGE_LOOP('',(#27955,#27956,#27957,#27958,#27959,#27960,#27966, + #27967,#27974)); +#27955 = ORIENTED_EDGE('',*,*,#27444,.T.); +#27956 = ORIENTED_EDGE('',*,*,#27684,.F.); +#27957 = ORIENTED_EDGE('',*,*,#27652,.T.); +#27958 = ORIENTED_EDGE('',*,*,#27365,.T.); +#27959 = ORIENTED_EDGE('',*,*,#27359,.T.); +#27960 = ORIENTED_EDGE('',*,*,#27961,.T.); +#27961 = EDGE_CURVE('',#27352,#27899,#27962,.T.); +#27962 = LINE('',#27963,#27964); +#27963 = CARTESIAN_POINT('',(-1.225,1.,1.08)); +#27964 = VECTOR('',#27965,1.); +#27965 = DIRECTION('',(0.,0.,1.)); +#27966 = ORIENTED_EDGE('',*,*,#27898,.T.); +#27967 = ORIENTED_EDGE('',*,*,#27968,.T.); +#27968 = EDGE_CURVE('',#27891,#27744,#27969,.T.); +#27969 = CIRCLE('',#27970,0.12); +#27970 = AXIS2_PLACEMENT_3D('',#27971,#27972,#27973); +#27971 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#27972 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27973 = DIRECTION('',(-4.108650548025E-31,-3.700743415417E-15,1.)); +#27974 = ORIENTED_EDGE('',*,*,#27743,.T.); +#27975 = PLANE('',#27976); +#27976 = AXIS2_PLACEMENT_3D('',#27977,#27978,#27979); +#27977 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#27978 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#27979 = DIRECTION('',(0.,0.,-1.)); +#27980 = ADVANCED_FACE('',(#27981),#27987,.F.); +#27981 = FACE_BOUND('',#27982,.F.); +#27982 = EDGE_LOOP('',(#27983,#27984,#27985,#27986)); +#27983 = ORIENTED_EDGE('',*,*,#27351,.F.); +#27984 = ORIENTED_EDGE('',*,*,#27961,.T.); +#27985 = ORIENTED_EDGE('',*,*,#27906,.T.); +#27986 = ORIENTED_EDGE('',*,*,#27387,.F.); +#27987 = PLANE('',#27988); +#27988 = AXIS2_PLACEMENT_3D('',#27989,#27990,#27991); +#27989 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#27990 = DIRECTION('',(0.,-1.,0.)); +#27991 = DIRECTION('',(-1.,0.,0.)); +#27992 = ADVANCED_FACE('',(#27993),#27999,.T.); +#27993 = FACE_BOUND('',#27994,.T.); +#27994 = EDGE_LOOP('',(#27995,#27996,#27997,#27998)); +#27995 = ORIENTED_EDGE('',*,*,#27890,.F.); +#27996 = ORIENTED_EDGE('',*,*,#27822,.T.); +#27997 = ORIENTED_EDGE('',*,*,#27775,.T.); +#27998 = ORIENTED_EDGE('',*,*,#27968,.F.); +#27999 = CYLINDRICAL_SURFACE('',#28000,0.12); +#28000 = AXIS2_PLACEMENT_3D('',#28001,#28002,#28003); +#28001 = CARTESIAN_POINT('',(-0.6125,1.13,1.08)); +#28002 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28003 = DIRECTION('',(-4.108650548025E-31,-3.700743415417E-15,1.)); +#28004 = ADVANCED_FACE('',(#28005),#28024,.F.); +#28005 = FACE_BOUND('',#28006,.F.); +#28006 = EDGE_LOOP('',(#28007,#28015,#28022,#28023)); +#28007 = ORIENTED_EDGE('',*,*,#28008,.F.); +#28008 = EDGE_CURVE('',#28009,#27916,#28011,.T.); +#28009 = VERTEX_POINT('',#28010); +#28010 = CARTESIAN_POINT('',(0.8,0.,1.08)); +#28011 = LINE('',#28012,#28013); +#28012 = CARTESIAN_POINT('',(0.8,0.,1.08)); +#28013 = VECTOR('',#28014,1.); +#28014 = DIRECTION('',(0.,0.,1.)); +#28015 = ORIENTED_EDGE('',*,*,#28016,.T.); +#28016 = EDGE_CURVE('',#28009,#28009,#28017,.T.); +#28017 = CIRCLE('',#28018,0.8); +#28018 = AXIS2_PLACEMENT_3D('',#28019,#28020,#28021); +#28019 = CARTESIAN_POINT('',(0.,0.,1.08)); +#28020 = DIRECTION('',(0.,0.,1.)); +#28021 = DIRECTION('',(1.,0.,-0.)); +#28022 = ORIENTED_EDGE('',*,*,#28008,.T.); +#28023 = ORIENTED_EDGE('',*,*,#27915,.F.); +#28024 = CYLINDRICAL_SURFACE('',#28025,0.8); +#28025 = AXIS2_PLACEMENT_3D('',#28026,#28027,#28028); +#28026 = CARTESIAN_POINT('',(0.,0.,1.08)); +#28027 = DIRECTION('',(0.,0.,1.)); +#28028 = DIRECTION('',(1.,0.,-0.)); +#28029 = ADVANCED_FACE('',(#28030,#28033),#28070,.T.); +#28030 = FACE_BOUND('',#28031,.T.); +#28031 = EDGE_LOOP('',(#28032)); +#28032 = ORIENTED_EDGE('',*,*,#28016,.T.); +#28033 = FACE_BOUND('',#28034,.T.); +#28034 = EDGE_LOOP('',(#28035,#28046,#28055,#28064)); +#28035 = ORIENTED_EDGE('',*,*,#28036,.F.); +#28036 = EDGE_CURVE('',#28037,#28039,#28041,.T.); +#28037 = VERTEX_POINT('',#28038); +#28038 = CARTESIAN_POINT('',(0.514761438768,0.545454545455,1.08)); +#28039 = VERTEX_POINT('',#28040); +#28040 = CARTESIAN_POINT('',(0.377491721764,0.6,1.08)); +#28041 = CIRCLE('',#28042,0.2); +#28042 = AXIS2_PLACEMENT_3D('',#28043,#28044,#28045); +#28043 = CARTESIAN_POINT('',(0.377491721764,0.4,1.08)); +#28044 = DIRECTION('',(-0.,0.,1.)); +#28045 = DIRECTION('',(0.,-1.,0.)); +#28046 = ORIENTED_EDGE('',*,*,#28047,.T.); +#28047 = EDGE_CURVE('',#28037,#28048,#28050,.T.); +#28048 = VERTEX_POINT('',#28049); +#28049 = CARTESIAN_POINT('',(-0.514761438768,0.545454545455,1.08)); +#28050 = CIRCLE('',#28051,0.75); +#28051 = AXIS2_PLACEMENT_3D('',#28052,#28053,#28054); +#28052 = CARTESIAN_POINT('',(0.,0.,1.08)); +#28053 = DIRECTION('',(0.,0.,-1.)); +#28054 = DIRECTION('',(0.6,0.8,0.)); +#28055 = ORIENTED_EDGE('',*,*,#28056,.T.); +#28056 = EDGE_CURVE('',#28048,#28057,#28059,.T.); +#28057 = VERTEX_POINT('',#28058); +#28058 = CARTESIAN_POINT('',(-0.377491721764,0.6,1.08)); +#28059 = CIRCLE('',#28060,0.2); +#28060 = AXIS2_PLACEMENT_3D('',#28061,#28062,#28063); +#28061 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.08)); +#28062 = DIRECTION('',(-0.,-0.,-1.)); +#28063 = DIRECTION('',(0.,-1.,0.)); +#28064 = ORIENTED_EDGE('',*,*,#28065,.T.); +#28065 = EDGE_CURVE('',#28057,#28039,#28066,.T.); +#28066 = LINE('',#28067,#28068); +#28067 = CARTESIAN_POINT('',(-0.375,0.6,1.08)); +#28068 = VECTOR('',#28069,1.); +#28069 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28070 = PLANE('',#28071); +#28071 = AXIS2_PLACEMENT_3D('',#28072,#28073,#28074); +#28072 = CARTESIAN_POINT('',(0.,0.,1.08)); +#28073 = DIRECTION('',(0.,0.,1.)); +#28074 = DIRECTION('',(1.,0.,-0.)); +#28075 = ADVANCED_FACE('',(#28076),#28102,.T.); +#28076 = FACE_BOUND('',#28077,.T.); +#28077 = EDGE_LOOP('',(#28078,#28079,#28087,#28096)); +#28078 = ORIENTED_EDGE('',*,*,#28036,.T.); +#28079 = ORIENTED_EDGE('',*,*,#28080,.T.); +#28080 = EDGE_CURVE('',#28039,#28081,#28083,.T.); +#28081 = VERTEX_POINT('',#28082); +#28082 = CARTESIAN_POINT('',(0.377491721764,0.6,1.4)); +#28083 = LINE('',#28084,#28085); +#28084 = CARTESIAN_POINT('',(0.377491721764,0.6,1.08)); +#28085 = VECTOR('',#28086,1.); +#28086 = DIRECTION('',(0.,0.,1.)); +#28087 = ORIENTED_EDGE('',*,*,#28088,.T.); +#28088 = EDGE_CURVE('',#28081,#28089,#28091,.T.); +#28089 = VERTEX_POINT('',#28090); +#28090 = CARTESIAN_POINT('',(0.514761438768,0.545454545455,1.4)); +#28091 = CIRCLE('',#28092,0.2); +#28092 = AXIS2_PLACEMENT_3D('',#28093,#28094,#28095); +#28093 = CARTESIAN_POINT('',(0.377491721764,0.4,1.4)); +#28094 = DIRECTION('',(0.,0.,-1.)); +#28095 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#28096 = ORIENTED_EDGE('',*,*,#28097,.F.); +#28097 = EDGE_CURVE('',#28037,#28089,#28098,.T.); +#28098 = LINE('',#28099,#28100); +#28099 = CARTESIAN_POINT('',(0.514761438768,0.545454545455,1.08)); +#28100 = VECTOR('',#28101,1.); +#28101 = DIRECTION('',(0.,0.,1.)); +#28102 = CYLINDRICAL_SURFACE('',#28103,0.2); +#28103 = AXIS2_PLACEMENT_3D('',#28104,#28105,#28106); +#28104 = CARTESIAN_POINT('',(0.377491721764,0.4,1.08)); +#28105 = DIRECTION('',(0.,0.,1.)); +#28106 = DIRECTION('',(0.686348585025,0.727272727273,-0.)); +#28107 = ADVANCED_FACE('',(#28108),#28126,.T.); +#28108 = FACE_BOUND('',#28109,.T.); +#28109 = EDGE_LOOP('',(#28110,#28111,#28119,#28125)); +#28110 = ORIENTED_EDGE('',*,*,#28065,.F.); +#28111 = ORIENTED_EDGE('',*,*,#28112,.T.); +#28112 = EDGE_CURVE('',#28057,#28113,#28115,.T.); +#28113 = VERTEX_POINT('',#28114); +#28114 = CARTESIAN_POINT('',(-0.377491721764,0.6,1.4)); +#28115 = LINE('',#28116,#28117); +#28116 = CARTESIAN_POINT('',(-0.377491721764,0.6,1.08)); +#28117 = VECTOR('',#28118,1.); +#28118 = DIRECTION('',(0.,0.,1.)); +#28119 = ORIENTED_EDGE('',*,*,#28120,.T.); +#28120 = EDGE_CURVE('',#28113,#28081,#28121,.T.); +#28121 = LINE('',#28122,#28123); +#28122 = CARTESIAN_POINT('',(-0.45,0.6,1.4)); +#28123 = VECTOR('',#28124,1.); +#28124 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28125 = ORIENTED_EDGE('',*,*,#28080,.F.); +#28126 = PLANE('',#28127); +#28127 = AXIS2_PLACEMENT_3D('',#28128,#28129,#28130); +#28128 = CARTESIAN_POINT('',(-0.75,0.6,0.)); +#28129 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28130 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28131 = ADVANCED_FACE('',(#28132),#28151,.T.); +#28132 = FACE_BOUND('',#28133,.T.); +#28133 = EDGE_LOOP('',(#28134,#28142,#28149,#28150)); +#28134 = ORIENTED_EDGE('',*,*,#28135,.T.); +#28135 = EDGE_CURVE('',#28048,#28136,#28138,.T.); +#28136 = VERTEX_POINT('',#28137); +#28137 = CARTESIAN_POINT('',(-0.514761438768,0.545454545455,1.4)); +#28138 = LINE('',#28139,#28140); +#28139 = CARTESIAN_POINT('',(-0.514761438768,0.545454545455,1.08)); +#28140 = VECTOR('',#28141,1.); +#28141 = DIRECTION('',(0.,0.,1.)); +#28142 = ORIENTED_EDGE('',*,*,#28143,.F.); +#28143 = EDGE_CURVE('',#28113,#28136,#28144,.T.); +#28144 = CIRCLE('',#28145,0.2); +#28145 = AXIS2_PLACEMENT_3D('',#28146,#28147,#28148); +#28146 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.4)); +#28147 = DIRECTION('',(0.,-0.,1.)); +#28148 = DIRECTION('',(2.775557561563E-16,1.,0.)); +#28149 = ORIENTED_EDGE('',*,*,#28112,.F.); +#28150 = ORIENTED_EDGE('',*,*,#28056,.F.); +#28151 = CYLINDRICAL_SURFACE('',#28152,0.2); +#28152 = AXIS2_PLACEMENT_3D('',#28153,#28154,#28155); +#28153 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.08)); +#28154 = DIRECTION('',(0.,0.,1.)); +#28155 = DIRECTION('',(-0.686348585025,0.727272727273,0.)); +#28156 = ADVANCED_FACE('',(#28157),#28169,.T.); +#28157 = FACE_BOUND('',#28158,.T.); +#28158 = EDGE_LOOP('',(#28159,#28160,#28161,#28168)); +#28159 = ORIENTED_EDGE('',*,*,#28047,.F.); +#28160 = ORIENTED_EDGE('',*,*,#28097,.T.); +#28161 = ORIENTED_EDGE('',*,*,#28162,.T.); +#28162 = EDGE_CURVE('',#28089,#28136,#28163,.T.); +#28163 = CIRCLE('',#28164,0.75); +#28164 = AXIS2_PLACEMENT_3D('',#28165,#28166,#28167); +#28165 = CARTESIAN_POINT('',(0.,0.,1.4)); +#28166 = DIRECTION('',(0.,0.,-1.)); +#28167 = DIRECTION('',(0.6,0.8,0.)); +#28168 = ORIENTED_EDGE('',*,*,#28135,.F.); +#28169 = CYLINDRICAL_SURFACE('',#28170,0.75); +#28170 = AXIS2_PLACEMENT_3D('',#28171,#28172,#28173); +#28171 = CARTESIAN_POINT('',(0.,0.,1.08)); +#28172 = DIRECTION('',(0.,0.,1.)); +#28173 = DIRECTION('',(1.,0.,-0.)); +#28174 = ADVANCED_FACE('',(#28175),#28194,.T.); +#28175 = FACE_BOUND('',#28176,.T.); +#28176 = EDGE_LOOP('',(#28177,#28186,#28193)); +#28177 = ORIENTED_EDGE('',*,*,#28178,.F.); +#28178 = EDGE_CURVE('',#28179,#28081,#28181,.T.); +#28179 = VERTEX_POINT('',#28180); +#28180 = CARTESIAN_POINT('',(0.377491721764,0.4,1.6)); +#28181 = CIRCLE('',#28182,0.2); +#28182 = AXIS2_PLACEMENT_3D('',#28183,#28184,#28185); +#28183 = CARTESIAN_POINT('',(0.377491721764,0.4,1.4)); +#28184 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#28185 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#28186 = ORIENTED_EDGE('',*,*,#28187,.T.); +#28187 = EDGE_CURVE('',#28179,#28089,#28188,.T.); +#28188 = CIRCLE('',#28189,0.2); +#28189 = AXIS2_PLACEMENT_3D('',#28190,#28191,#28192); +#28190 = CARTESIAN_POINT('',(0.377491721764,0.4,1.4)); +#28191 = DIRECTION('',(-0.727272727273,0.686348585025,0.)); +#28192 = DIRECTION('',(0.686348585025,0.727272727273,0.)); +#28193 = ORIENTED_EDGE('',*,*,#28088,.F.); +#28194 = SPHERICAL_SURFACE('',#28195,0.2); +#28195 = AXIS2_PLACEMENT_3D('',#28196,#28197,#28198); +#28196 = CARTESIAN_POINT('',(0.377491721764,0.4,1.4)); +#28197 = DIRECTION('',(-0.,-0.,-1.)); +#28198 = DIRECTION('',(5.551115123126E-16,1.,-0.)); +#28199 = ADVANCED_FACE('',(#28200),#28219,.T.); +#28200 = FACE_BOUND('',#28201,.T.); +#28201 = EDGE_LOOP('',(#28202,#28211,#28217,#28218)); +#28202 = ORIENTED_EDGE('',*,*,#28203,.F.); +#28203 = EDGE_CURVE('',#28204,#28113,#28206,.T.); +#28204 = VERTEX_POINT('',#28205); +#28205 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.6)); +#28206 = CIRCLE('',#28207,0.2); +#28207 = AXIS2_PLACEMENT_3D('',#28208,#28209,#28210); +#28208 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.4)); +#28209 = DIRECTION('',(-1.,2.775557561563E-16,0.)); +#28210 = DIRECTION('',(2.775557561563E-16,1.,0.)); +#28211 = ORIENTED_EDGE('',*,*,#28212,.T.); +#28212 = EDGE_CURVE('',#28204,#28179,#28213,.T.); +#28213 = LINE('',#28214,#28215); +#28214 = CARTESIAN_POINT('',(-0.45,0.4,1.6)); +#28215 = VECTOR('',#28216,1.); +#28216 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28217 = ORIENTED_EDGE('',*,*,#28178,.T.); +#28218 = ORIENTED_EDGE('',*,*,#28120,.F.); +#28219 = CYLINDRICAL_SURFACE('',#28220,0.2); +#28220 = AXIS2_PLACEMENT_3D('',#28221,#28222,#28223); +#28221 = CARTESIAN_POINT('',(-0.45,0.4,1.4)); +#28222 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28223 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28224 = ADVANCED_FACE('',(#28225),#28236,.T.); +#28225 = FACE_BOUND('',#28226,.T.); +#28226 = EDGE_LOOP('',(#28227,#28228,#28235)); +#28227 = ORIENTED_EDGE('',*,*,#28143,.T.); +#28228 = ORIENTED_EDGE('',*,*,#28229,.F.); +#28229 = EDGE_CURVE('',#28204,#28136,#28230,.T.); +#28230 = CIRCLE('',#28231,0.2); +#28231 = AXIS2_PLACEMENT_3D('',#28232,#28233,#28234); +#28232 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.4)); +#28233 = DIRECTION('',(-0.727272727273,-0.686348585025,-0.)); +#28234 = DIRECTION('',(-0.686348585025,0.727272727273,0.)); +#28235 = ORIENTED_EDGE('',*,*,#28203,.T.); +#28236 = SPHERICAL_SURFACE('',#28237,0.2); +#28237 = AXIS2_PLACEMENT_3D('',#28238,#28239,#28240); +#28238 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.4)); +#28239 = DIRECTION('',(-0.,-0.,-1.)); +#28240 = DIRECTION('',(2.775557561563E-16,1.,-0.)); +#28241 = ADVANCED_FACE('',(#28242),#28254,.T.); +#28242 = FACE_BOUND('',#28243,.T.); +#28243 = EDGE_LOOP('',(#28244,#28251,#28252,#28253)); +#28244 = ORIENTED_EDGE('',*,*,#28245,.T.); +#28245 = EDGE_CURVE('',#28179,#28204,#28246,.T.); +#28246 = CIRCLE('',#28247,0.55); +#28247 = AXIS2_PLACEMENT_3D('',#28248,#28249,#28250); +#28248 = CARTESIAN_POINT('',(0.,0.,1.6)); +#28249 = DIRECTION('',(0.,0.,-1.)); +#28250 = DIRECTION('',(0.6,0.8,0.)); +#28251 = ORIENTED_EDGE('',*,*,#28229,.T.); +#28252 = ORIENTED_EDGE('',*,*,#28162,.F.); +#28253 = ORIENTED_EDGE('',*,*,#28187,.F.); +#28254 = TOROIDAL_SURFACE('',#28255,0.55,0.2); +#28255 = AXIS2_PLACEMENT_3D('',#28256,#28257,#28258); +#28256 = CARTESIAN_POINT('',(0.,0.,1.4)); +#28257 = DIRECTION('',(0.,0.,1.)); +#28258 = DIRECTION('',(0.6,0.8,-0.)); +#28259 = ADVANCED_FACE('',(#28260),#28264,.T.); +#28260 = FACE_BOUND('',#28261,.T.); +#28261 = EDGE_LOOP('',(#28262,#28263)); +#28262 = ORIENTED_EDGE('',*,*,#28212,.F.); +#28263 = ORIENTED_EDGE('',*,*,#28245,.F.); +#28264 = PLANE('',#28265); +#28265 = AXIS2_PLACEMENT_3D('',#28266,#28267,#28268); +#28266 = CARTESIAN_POINT('',(0.,0.,1.6)); +#28267 = DIRECTION('',(0.,0.,1.)); +#28268 = DIRECTION('',(1.,0.,-0.)); +#28269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#28273)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#28270,#28271,#28272)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#28270 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#28271 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#28272 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#28273 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#28270, + 'distance_accuracy_value','confusion accuracy'); +#28274 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#28275,#28277); +#28275 = ( REPRESENTATION_RELATIONSHIP('','',#25634,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#28276) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#28276 = ITEM_DEFINED_TRANSFORMATION('','',#11,#183); +#28277 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #28278); +#28278 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('43','SW1','',#5,#25629,$); +#28279 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#25631)); +#28280 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#28281,#28283); +#28281 = ( REPRESENTATION_RELATIONSHIP('','',#25634,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#28282) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#28282 = ITEM_DEFINED_TRANSFORMATION('','',#11,#187); +#28283 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #28284); +#28284 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('44','SW2','',#5,#25629,$); +#28285 = SHAPE_DEFINITION_REPRESENTATION(#28286,#28292); +#28286 = PRODUCT_DEFINITION_SHAPE('','',#28287); +#28287 = PRODUCT_DEFINITION('design','',#28288,#28291); +#28288 = PRODUCT_DEFINITION_FORMATION('','',#28289); +#28289 = PRODUCT('ESP32-WROOM-32E','ESP32-WROOM-32E','',(#28290)); +#28290 = PRODUCT_CONTEXT('',#2,'mechanical'); +#28291 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#28292 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#28293),#43618); +#28293 = BREP_WITH_VOIDS('',#28294,(#41518,#41668,#41818,#41968,#42118, + #42268,#42418,#42568,#42718,#42868,#43018,#43168,#43318,#43468)); +#28294 = CLOSED_SHELL('',(#28295,#28335,#28374,#28421,#30568,#32097, + #32129,#32169,#32193,#32222,#32247,#32271,#32296,#32334,#32388, + #32424,#32456,#32480,#32505,#32543,#32597,#32633,#32665,#32689, + #32714,#32752,#32806,#32842,#32874,#32898,#32923,#32961,#33015, + #33051,#33083,#33107,#33132,#33170,#33224,#33260,#33292,#33316, + #33341,#33379,#33433,#33469,#33501,#33525,#33550,#33588,#33642, + #33678,#33710,#33734,#33759,#33797,#33851,#33887,#33919,#33943, + #33968,#34006,#34060,#34096,#34128,#34152,#34177,#34215,#34269, + #34305,#34337,#34361,#34386,#34424,#34478,#34514,#34546,#34570, + #34595,#34633,#34687,#34723,#34755,#34779,#34804,#34842,#34896, + #34932,#34964,#34988,#35013,#35043,#35081,#35106,#35131,#35167, + #35203,#35241,#35279,#35315,#35351,#35389,#35427,#35463,#35499, + #35537,#35575,#35611,#35647,#35685,#35723,#35759,#35795,#35833, + #35845,#35857,#35869,#35881,#35893,#35905,#35917,#35929,#35941, + #35968,#35992,#36009,#36043,#36067,#36091,#36108,#36142,#36166, + #36190,#36207,#36241,#36265,#36289,#36306,#36340,#36364,#36388, + #36405,#36439,#36463,#36487,#36504,#36538,#36562,#36586,#36603, + #36637,#36661,#36685,#36702,#36736,#36760,#36784,#36801,#36835, + #36859,#36883,#36900,#36934,#36958,#36982,#36999,#37033,#37057, + #37081,#37098,#37132,#37156,#37180,#37197,#37231,#37255,#37279, + #37296,#37330,#37364,#37398,#37432,#37466,#37500,#37534,#37568, + #37602,#37636,#37668,#37692,#37717,#37741,#37766,#37790,#37815, + #37832,#37863,#37887,#37911,#37935,#37959,#37983,#38007,#38031, + #38055,#38079,#38103,#38127,#38151,#38175,#38199,#38223,#38247, + #38271,#38295,#38319,#38343,#38367,#38391,#38415,#38439,#38463, + #38487,#38504,#38521,#38554,#38573,#38592,#38605,#38619,#38637, + #38670,#38687,#38700,#38727,#38753,#38771,#38804,#38821,#38834, + #38861,#38887,#38905,#38938,#38955,#38968,#38995,#39021,#39039, + #39072,#39089,#39102,#39129,#39155,#39173,#39206,#39223,#39236, + #39263,#39289,#39307,#39340,#39357,#39370,#39397,#39423,#39441, + #39474,#39491,#39504,#39531,#39557,#39575,#39608,#39625,#39638, + #39665,#39691,#39709,#39742,#39759,#39772,#39799,#39825,#39843, + #39876,#39893,#39906,#39933,#39959,#39977,#40010,#40027,#40040, + #40067,#40093,#40111,#40144,#40161,#40174,#40201,#40227,#40245, + #40278,#40295,#40308,#40335,#40361,#40379,#40397,#40414,#40427, + #40444,#40457,#40475,#40493,#40510,#40523,#40540,#40553,#40571, + #40589,#40606,#40619,#40636,#40649,#40667,#40685,#40702,#40715, + #40732,#40745,#40763,#40781,#40798,#40811,#40828,#40841,#40861, + #40881,#40901,#40921,#40941,#40961,#40981,#41001,#41021,#41041, + #41061,#41081,#41101,#41126,#41151,#41168,#41193,#41210,#41235, + #41252,#41269,#41305,#41317,#41329,#41341,#41353,#41365,#41377, + #41389,#41401,#41413,#41425,#41437,#41449,#41461,#41484,#41509)); +#28295 = ADVANCED_FACE('',(#28296),#28330,.T.); +#28296 = FACE_BOUND('',#28297,.T.); +#28297 = EDGE_LOOP('',(#28298,#28308,#28316,#28324)); +#28298 = ORIENTED_EDGE('',*,*,#28299,.T.); +#28299 = EDGE_CURVE('',#28300,#28302,#28304,.T.); +#28300 = VERTEX_POINT('',#28301); +#28301 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#28302 = VERTEX_POINT('',#28303); +#28303 = CARTESIAN_POINT('',(-9.,12.75,0.8)); +#28304 = LINE('',#28305,#28306); +#28305 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#28306 = VECTOR('',#28307,1.); +#28307 = DIRECTION('',(0.,0.,1.)); +#28308 = ORIENTED_EDGE('',*,*,#28309,.T.); +#28309 = EDGE_CURVE('',#28302,#28310,#28312,.T.); +#28310 = VERTEX_POINT('',#28311); +#28311 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#28312 = LINE('',#28313,#28314); +#28313 = CARTESIAN_POINT('',(-9.,12.75,0.8)); +#28314 = VECTOR('',#28315,1.); +#28315 = DIRECTION('',(1.,0.,0.)); +#28316 = ORIENTED_EDGE('',*,*,#28317,.F.); +#28317 = EDGE_CURVE('',#28318,#28310,#28320,.T.); +#28318 = VERTEX_POINT('',#28319); +#28319 = CARTESIAN_POINT('',(9.,12.75,0.)); +#28320 = LINE('',#28321,#28322); +#28321 = CARTESIAN_POINT('',(9.,12.75,0.)); +#28322 = VECTOR('',#28323,1.); +#28323 = DIRECTION('',(0.,0.,1.)); +#28324 = ORIENTED_EDGE('',*,*,#28325,.F.); +#28325 = EDGE_CURVE('',#28300,#28318,#28326,.T.); +#28326 = LINE('',#28327,#28328); +#28327 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#28328 = VECTOR('',#28329,1.); +#28329 = DIRECTION('',(1.,0.,0.)); +#28330 = PLANE('',#28331); +#28331 = AXIS2_PLACEMENT_3D('',#28332,#28333,#28334); +#28332 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#28333 = DIRECTION('',(0.,1.,0.)); +#28334 = DIRECTION('',(1.,0.,0.)); +#28335 = ADVANCED_FACE('',(#28336),#28369,.T.); +#28336 = FACE_BOUND('',#28337,.T.); +#28337 = EDGE_LOOP('',(#28338,#28346,#28354,#28362,#28368)); +#28338 = ORIENTED_EDGE('',*,*,#28339,.F.); +#28339 = EDGE_CURVE('',#28340,#28300,#28342,.T.); +#28340 = VERTEX_POINT('',#28341); +#28341 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#28342 = LINE('',#28343,#28344); +#28343 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28344 = VECTOR('',#28345,1.); +#28345 = DIRECTION('',(0.,1.,0.)); +#28346 = ORIENTED_EDGE('',*,*,#28347,.F.); +#28347 = EDGE_CURVE('',#28348,#28340,#28350,.T.); +#28348 = VERTEX_POINT('',#28349); +#28349 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#28350 = LINE('',#28351,#28352); +#28351 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#28352 = VECTOR('',#28353,1.); +#28353 = DIRECTION('',(-0.,-0.,-1.)); +#28354 = ORIENTED_EDGE('',*,*,#28355,.F.); +#28355 = EDGE_CURVE('',#28356,#28348,#28358,.T.); +#28356 = VERTEX_POINT('',#28357); +#28357 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#28358 = LINE('',#28359,#28360); +#28359 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#28360 = VECTOR('',#28361,1.); +#28361 = DIRECTION('',(-0.,-0.,-1.)); +#28362 = ORIENTED_EDGE('',*,*,#28363,.T.); +#28363 = EDGE_CURVE('',#28356,#28302,#28364,.T.); +#28364 = LINE('',#28365,#28366); +#28365 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#28366 = VECTOR('',#28367,1.); +#28367 = DIRECTION('',(0.,1.,0.)); +#28368 = ORIENTED_EDGE('',*,*,#28299,.F.); +#28369 = PLANE('',#28370); +#28370 = AXIS2_PLACEMENT_3D('',#28371,#28372,#28373); +#28371 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28372 = DIRECTION('',(-1.,0.,0.)); +#28373 = DIRECTION('',(0.,1.,0.)); +#28374 = ADVANCED_FACE('',(#28375),#28416,.T.); +#28375 = FACE_BOUND('',#28376,.T.); +#28376 = EDGE_LOOP('',(#28377,#28385,#28386,#28394,#28402,#28410)); +#28377 = ORIENTED_EDGE('',*,*,#28378,.F.); +#28378 = EDGE_CURVE('',#28318,#28379,#28381,.T.); +#28379 = VERTEX_POINT('',#28380); +#28380 = CARTESIAN_POINT('',(9.,5.71,0.)); +#28381 = LINE('',#28382,#28383); +#28382 = CARTESIAN_POINT('',(9.,12.75,0.)); +#28383 = VECTOR('',#28384,1.); +#28384 = DIRECTION('',(0.,-1.,0.)); +#28385 = ORIENTED_EDGE('',*,*,#28317,.T.); +#28386 = ORIENTED_EDGE('',*,*,#28387,.T.); +#28387 = EDGE_CURVE('',#28310,#28388,#28390,.T.); +#28388 = VERTEX_POINT('',#28389); +#28389 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#28390 = LINE('',#28391,#28392); +#28391 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#28392 = VECTOR('',#28393,1.); +#28393 = DIRECTION('',(0.,-1.,0.)); +#28394 = ORIENTED_EDGE('',*,*,#28395,.T.); +#28395 = EDGE_CURVE('',#28388,#28396,#28398,.T.); +#28396 = VERTEX_POINT('',#28397); +#28397 = CARTESIAN_POINT('',(9.000000214576,5.71,0.799997854233)); +#28398 = LINE('',#28399,#28400); +#28399 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#28400 = VECTOR('',#28401,1.); +#28401 = DIRECTION('',(0.,0.,-1.)); +#28402 = ORIENTED_EDGE('',*,*,#28403,.T.); +#28403 = EDGE_CURVE('',#28396,#28404,#28406,.T.); +#28404 = VERTEX_POINT('',#28405); +#28405 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#28406 = LINE('',#28407,#28408); +#28407 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#28408 = VECTOR('',#28409,1.); +#28409 = DIRECTION('',(0.,0.,-1.)); +#28410 = ORIENTED_EDGE('',*,*,#28411,.T.); +#28411 = EDGE_CURVE('',#28404,#28379,#28412,.T.); +#28412 = LINE('',#28413,#28414); +#28413 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#28414 = VECTOR('',#28415,1.); +#28415 = DIRECTION('',(0.,0.,-1.)); +#28416 = PLANE('',#28417); +#28417 = AXIS2_PLACEMENT_3D('',#28418,#28419,#28420); +#28418 = CARTESIAN_POINT('',(9.,12.75,0.)); +#28419 = DIRECTION('',(1.,0.,0.)); +#28420 = DIRECTION('',(0.,-1.,0.)); +#28421 = ADVANCED_FACE('',(#28422,#30257,#30291,#30325,#30359,#30393, + #30427,#30461,#30495,#30529),#30563,.F.); +#28422 = FACE_BOUND('',#28423,.F.); +#28423 = EDGE_LOOP('',(#28424,#28425,#28426,#28434,#28442,#28450,#28458, + #28466,#28474,#28482,#28490,#28498,#28506,#28514,#28522,#28530, + #28538,#28546,#28554,#28562,#28570,#28578,#28586,#28594,#28602, + #28610,#28618,#28626,#28634,#28642,#28650,#28658,#28666,#28674, + #28682,#28690,#28698,#28706,#28714,#28722,#28730,#28738,#28746, + #28754,#28762,#28770,#28778,#28786,#28794,#28802,#28810,#28818, + #28826,#28834,#28842,#28850,#28858,#28866,#28874,#28882,#28890, + #28898,#28906,#28914,#28922,#28930,#28938,#28946,#28954,#28962, + #28970,#28978,#28986,#28994,#29002,#29010,#29018,#29026,#29034, + #29042,#29050,#29058,#29066,#29074,#29082,#29090,#29098,#29106, + #29114,#29122,#29130,#29138,#29146,#29154,#29162,#29170,#29178, + #29186,#29194,#29202,#29210,#29218,#29226,#29234,#29242,#29250, + #29258,#29266,#29274,#29282,#29290,#29298,#29306,#29314,#29322, + #29330,#29338,#29346,#29354,#29362,#29370,#29378,#29386,#29394, + #29402,#29410,#29418,#29426,#29434,#29442,#29450,#29458,#29466, + #29474,#29482,#29490,#29498,#29506,#29514,#29522,#29530,#29538, + #29546,#29554,#29562,#29570,#29578,#29586,#29594,#29602,#29610, + #29618,#29626,#29634,#29642,#29650,#29658,#29666,#29674,#29682, + #29690,#29698,#29706,#29714,#29722,#29730,#29738,#29746,#29754, + #29762,#29770,#29778,#29786,#29794,#29802,#29810,#29818,#29826, + #29834,#29842,#29850,#29858,#29866,#29874,#29882,#29890,#29898, + #29906,#29914,#29922,#29930,#29938,#29946,#29954,#29962,#29970, + #29978,#29986,#29994,#30002,#30010,#30018,#30026,#30034,#30042, + #30050,#30058,#30066,#30074,#30082,#30090,#30098,#30106,#30114, + #30122,#30130,#30138,#30146,#30154,#30162,#30170,#30178,#30186, + #30194,#30202,#30210,#30218,#30226,#30234,#30242,#30250,#30256)); +#28424 = ORIENTED_EDGE('',*,*,#28325,.F.); +#28425 = ORIENTED_EDGE('',*,*,#28339,.F.); +#28426 = ORIENTED_EDGE('',*,*,#28427,.T.); +#28427 = EDGE_CURVE('',#28340,#28428,#28430,.T.); +#28428 = VERTEX_POINT('',#28429); +#28429 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#28430 = LINE('',#28431,#28432); +#28431 = CARTESIAN_POINT('',(-4.5,5.71,0.)); +#28432 = VECTOR('',#28433,1.); +#28433 = DIRECTION('',(1.,0.,0.)); +#28434 = ORIENTED_EDGE('',*,*,#28435,.T.); +#28435 = EDGE_CURVE('',#28428,#28436,#28438,.T.); +#28436 = VERTEX_POINT('',#28437); +#28437 = CARTESIAN_POINT('',(-8.15,5.71,0.)); +#28438 = LINE('',#28439,#28440); +#28439 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#28440 = VECTOR('',#28441,1.); +#28441 = DIRECTION('',(1.,0.,0.)); +#28442 = ORIENTED_EDGE('',*,*,#28443,.T.); +#28443 = EDGE_CURVE('',#28436,#28444,#28446,.T.); +#28444 = VERTEX_POINT('',#28445); +#28445 = CARTESIAN_POINT('',(-8.15,4.81,0.)); +#28446 = LINE('',#28447,#28448); +#28447 = CARTESIAN_POINT('',(-8.15,11.11,0.)); +#28448 = VECTOR('',#28449,1.); +#28449 = DIRECTION('',(0.,-1.,0.)); +#28450 = ORIENTED_EDGE('',*,*,#28451,.F.); +#28451 = EDGE_CURVE('',#28452,#28444,#28454,.T.); +#28452 = VERTEX_POINT('',#28453); +#28453 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#28454 = LINE('',#28455,#28456); +#28455 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#28456 = VECTOR('',#28457,1.); +#28457 = DIRECTION('',(1.,0.,0.)); +#28458 = ORIENTED_EDGE('',*,*,#28459,.T.); +#28459 = EDGE_CURVE('',#28452,#28460,#28462,.T.); +#28460 = VERTEX_POINT('',#28461); +#28461 = CARTESIAN_POINT('',(-9.,4.81,0.)); +#28462 = LINE('',#28463,#28464); +#28463 = CARTESIAN_POINT('',(-4.275,4.81,0.)); +#28464 = VECTOR('',#28465,1.); +#28465 = DIRECTION('',(-1.,0.,0.)); +#28466 = ORIENTED_EDGE('',*,*,#28467,.F.); +#28467 = EDGE_CURVE('',#28468,#28460,#28470,.T.); +#28468 = VERTEX_POINT('',#28469); +#28469 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#28470 = LINE('',#28471,#28472); +#28471 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28472 = VECTOR('',#28473,1.); +#28473 = DIRECTION('',(0.,1.,0.)); +#28474 = ORIENTED_EDGE('',*,*,#28475,.T.); +#28475 = EDGE_CURVE('',#28468,#28476,#28478,.T.); +#28476 = VERTEX_POINT('',#28477); +#28477 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#28478 = LINE('',#28479,#28480); +#28479 = CARTESIAN_POINT('',(-4.5,4.44,0.)); +#28480 = VECTOR('',#28481,1.); +#28481 = DIRECTION('',(1.,0.,0.)); +#28482 = ORIENTED_EDGE('',*,*,#28483,.T.); +#28483 = EDGE_CURVE('',#28476,#28484,#28486,.T.); +#28484 = VERTEX_POINT('',#28485); +#28485 = CARTESIAN_POINT('',(-8.15,4.44,0.)); +#28486 = LINE('',#28487,#28488); +#28487 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#28488 = VECTOR('',#28489,1.); +#28489 = DIRECTION('',(1.,0.,0.)); +#28490 = ORIENTED_EDGE('',*,*,#28491,.T.); +#28491 = EDGE_CURVE('',#28484,#28492,#28494,.T.); +#28492 = VERTEX_POINT('',#28493); +#28493 = CARTESIAN_POINT('',(-8.15,3.54,0.)); +#28494 = LINE('',#28495,#28496); +#28495 = CARTESIAN_POINT('',(-8.15,9.84,0.)); +#28496 = VECTOR('',#28497,1.); +#28497 = DIRECTION('',(0.,-1.,0.)); +#28498 = ORIENTED_EDGE('',*,*,#28499,.F.); +#28499 = EDGE_CURVE('',#28500,#28492,#28502,.T.); +#28500 = VERTEX_POINT('',#28501); +#28501 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#28502 = LINE('',#28503,#28504); +#28503 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#28504 = VECTOR('',#28505,1.); +#28505 = DIRECTION('',(1.,0.,0.)); +#28506 = ORIENTED_EDGE('',*,*,#28507,.T.); +#28507 = EDGE_CURVE('',#28500,#28508,#28510,.T.); +#28508 = VERTEX_POINT('',#28509); +#28509 = CARTESIAN_POINT('',(-9.,3.54,0.)); +#28510 = LINE('',#28511,#28512); +#28511 = CARTESIAN_POINT('',(-4.275,3.54,0.)); +#28512 = VECTOR('',#28513,1.); +#28513 = DIRECTION('',(-1.,0.,0.)); +#28514 = ORIENTED_EDGE('',*,*,#28515,.F.); +#28515 = EDGE_CURVE('',#28516,#28508,#28518,.T.); +#28516 = VERTEX_POINT('',#28517); +#28517 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#28518 = LINE('',#28519,#28520); +#28519 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28520 = VECTOR('',#28521,1.); +#28521 = DIRECTION('',(0.,1.,0.)); +#28522 = ORIENTED_EDGE('',*,*,#28523,.T.); +#28523 = EDGE_CURVE('',#28516,#28524,#28526,.T.); +#28524 = VERTEX_POINT('',#28525); +#28525 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#28526 = LINE('',#28527,#28528); +#28527 = CARTESIAN_POINT('',(-4.5,3.17,0.)); +#28528 = VECTOR('',#28529,1.); +#28529 = DIRECTION('',(1.,0.,0.)); +#28530 = ORIENTED_EDGE('',*,*,#28531,.T.); +#28531 = EDGE_CURVE('',#28524,#28532,#28534,.T.); +#28532 = VERTEX_POINT('',#28533); +#28533 = CARTESIAN_POINT('',(-8.15,3.17,0.)); +#28534 = LINE('',#28535,#28536); +#28535 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#28536 = VECTOR('',#28537,1.); +#28537 = DIRECTION('',(1.,0.,0.)); +#28538 = ORIENTED_EDGE('',*,*,#28539,.T.); +#28539 = EDGE_CURVE('',#28532,#28540,#28542,.T.); +#28540 = VERTEX_POINT('',#28541); +#28541 = CARTESIAN_POINT('',(-8.15,2.27,0.)); +#28542 = LINE('',#28543,#28544); +#28543 = CARTESIAN_POINT('',(-8.15,8.57,0.)); +#28544 = VECTOR('',#28545,1.); +#28545 = DIRECTION('',(0.,-1.,0.)); +#28546 = ORIENTED_EDGE('',*,*,#28547,.F.); +#28547 = EDGE_CURVE('',#28548,#28540,#28550,.T.); +#28548 = VERTEX_POINT('',#28549); +#28549 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#28550 = LINE('',#28551,#28552); +#28551 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#28552 = VECTOR('',#28553,1.); +#28553 = DIRECTION('',(1.,0.,0.)); +#28554 = ORIENTED_EDGE('',*,*,#28555,.T.); +#28555 = EDGE_CURVE('',#28548,#28556,#28558,.T.); +#28556 = VERTEX_POINT('',#28557); +#28557 = CARTESIAN_POINT('',(-9.,2.27,0.)); +#28558 = LINE('',#28559,#28560); +#28559 = CARTESIAN_POINT('',(-4.275,2.27,0.)); +#28560 = VECTOR('',#28561,1.); +#28561 = DIRECTION('',(-1.,0.,0.)); +#28562 = ORIENTED_EDGE('',*,*,#28563,.F.); +#28563 = EDGE_CURVE('',#28564,#28556,#28566,.T.); +#28564 = VERTEX_POINT('',#28565); +#28565 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#28566 = LINE('',#28567,#28568); +#28567 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28568 = VECTOR('',#28569,1.); +#28569 = DIRECTION('',(0.,1.,0.)); +#28570 = ORIENTED_EDGE('',*,*,#28571,.T.); +#28571 = EDGE_CURVE('',#28564,#28572,#28574,.T.); +#28572 = VERTEX_POINT('',#28573); +#28573 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#28574 = LINE('',#28575,#28576); +#28575 = CARTESIAN_POINT('',(-4.5,1.9,0.)); +#28576 = VECTOR('',#28577,1.); +#28577 = DIRECTION('',(1.,0.,0.)); +#28578 = ORIENTED_EDGE('',*,*,#28579,.T.); +#28579 = EDGE_CURVE('',#28572,#28580,#28582,.T.); +#28580 = VERTEX_POINT('',#28581); +#28581 = CARTESIAN_POINT('',(-8.15,1.9,0.)); +#28582 = LINE('',#28583,#28584); +#28583 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#28584 = VECTOR('',#28585,1.); +#28585 = DIRECTION('',(1.,0.,0.)); +#28586 = ORIENTED_EDGE('',*,*,#28587,.T.); +#28587 = EDGE_CURVE('',#28580,#28588,#28590,.T.); +#28588 = VERTEX_POINT('',#28589); +#28589 = CARTESIAN_POINT('',(-8.15,1.,0.)); +#28590 = LINE('',#28591,#28592); +#28591 = CARTESIAN_POINT('',(-8.15,7.3,0.)); +#28592 = VECTOR('',#28593,1.); +#28593 = DIRECTION('',(0.,-1.,0.)); +#28594 = ORIENTED_EDGE('',*,*,#28595,.F.); +#28595 = EDGE_CURVE('',#28596,#28588,#28598,.T.); +#28596 = VERTEX_POINT('',#28597); +#28597 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#28598 = LINE('',#28599,#28600); +#28599 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#28600 = VECTOR('',#28601,1.); +#28601 = DIRECTION('',(1.,0.,0.)); +#28602 = ORIENTED_EDGE('',*,*,#28603,.T.); +#28603 = EDGE_CURVE('',#28596,#28604,#28606,.T.); +#28604 = VERTEX_POINT('',#28605); +#28605 = CARTESIAN_POINT('',(-9.,1.,0.)); +#28606 = LINE('',#28607,#28608); +#28607 = CARTESIAN_POINT('',(-4.275,1.,0.)); +#28608 = VECTOR('',#28609,1.); +#28609 = DIRECTION('',(-1.,0.,0.)); +#28610 = ORIENTED_EDGE('',*,*,#28611,.F.); +#28611 = EDGE_CURVE('',#28612,#28604,#28614,.T.); +#28612 = VERTEX_POINT('',#28613); +#28613 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#28614 = LINE('',#28615,#28616); +#28615 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28616 = VECTOR('',#28617,1.); +#28617 = DIRECTION('',(0.,1.,0.)); +#28618 = ORIENTED_EDGE('',*,*,#28619,.T.); +#28619 = EDGE_CURVE('',#28612,#28620,#28622,.T.); +#28620 = VERTEX_POINT('',#28621); +#28621 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#28622 = LINE('',#28623,#28624); +#28623 = CARTESIAN_POINT('',(-4.5,0.63,0.)); +#28624 = VECTOR('',#28625,1.); +#28625 = DIRECTION('',(1.,0.,0.)); +#28626 = ORIENTED_EDGE('',*,*,#28627,.T.); +#28627 = EDGE_CURVE('',#28620,#28628,#28630,.T.); +#28628 = VERTEX_POINT('',#28629); +#28629 = CARTESIAN_POINT('',(-8.15,0.63,0.)); +#28630 = LINE('',#28631,#28632); +#28631 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#28632 = VECTOR('',#28633,1.); +#28633 = DIRECTION('',(1.,0.,0.)); +#28634 = ORIENTED_EDGE('',*,*,#28635,.T.); +#28635 = EDGE_CURVE('',#28628,#28636,#28638,.T.); +#28636 = VERTEX_POINT('',#28637); +#28637 = CARTESIAN_POINT('',(-8.15,-0.27,0.)); +#28638 = LINE('',#28639,#28640); +#28639 = CARTESIAN_POINT('',(-8.15,6.03,0.)); +#28640 = VECTOR('',#28641,1.); +#28641 = DIRECTION('',(0.,-1.,0.)); +#28642 = ORIENTED_EDGE('',*,*,#28643,.F.); +#28643 = EDGE_CURVE('',#28644,#28636,#28646,.T.); +#28644 = VERTEX_POINT('',#28645); +#28645 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#28646 = LINE('',#28647,#28648); +#28647 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#28648 = VECTOR('',#28649,1.); +#28649 = DIRECTION('',(1.,0.,0.)); +#28650 = ORIENTED_EDGE('',*,*,#28651,.T.); +#28651 = EDGE_CURVE('',#28644,#28652,#28654,.T.); +#28652 = VERTEX_POINT('',#28653); +#28653 = CARTESIAN_POINT('',(-9.,-0.27,0.)); +#28654 = LINE('',#28655,#28656); +#28655 = CARTESIAN_POINT('',(-4.275,-0.27,0.)); +#28656 = VECTOR('',#28657,1.); +#28657 = DIRECTION('',(-1.,0.,0.)); +#28658 = ORIENTED_EDGE('',*,*,#28659,.F.); +#28659 = EDGE_CURVE('',#28660,#28652,#28662,.T.); +#28660 = VERTEX_POINT('',#28661); +#28661 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#28662 = LINE('',#28663,#28664); +#28663 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28664 = VECTOR('',#28665,1.); +#28665 = DIRECTION('',(0.,1.,0.)); +#28666 = ORIENTED_EDGE('',*,*,#28667,.T.); +#28667 = EDGE_CURVE('',#28660,#28668,#28670,.T.); +#28668 = VERTEX_POINT('',#28669); +#28669 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#28670 = LINE('',#28671,#28672); +#28671 = CARTESIAN_POINT('',(-4.5,-0.64,0.)); +#28672 = VECTOR('',#28673,1.); +#28673 = DIRECTION('',(1.,0.,0.)); +#28674 = ORIENTED_EDGE('',*,*,#28675,.T.); +#28675 = EDGE_CURVE('',#28668,#28676,#28678,.T.); +#28676 = VERTEX_POINT('',#28677); +#28677 = CARTESIAN_POINT('',(-8.15,-0.64,0.)); +#28678 = LINE('',#28679,#28680); +#28679 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#28680 = VECTOR('',#28681,1.); +#28681 = DIRECTION('',(1.,0.,0.)); +#28682 = ORIENTED_EDGE('',*,*,#28683,.T.); +#28683 = EDGE_CURVE('',#28676,#28684,#28686,.T.); +#28684 = VERTEX_POINT('',#28685); +#28685 = CARTESIAN_POINT('',(-8.15,-1.54,0.)); +#28686 = LINE('',#28687,#28688); +#28687 = CARTESIAN_POINT('',(-8.15,4.76,0.)); +#28688 = VECTOR('',#28689,1.); +#28689 = DIRECTION('',(0.,-1.,0.)); +#28690 = ORIENTED_EDGE('',*,*,#28691,.F.); +#28691 = EDGE_CURVE('',#28692,#28684,#28694,.T.); +#28692 = VERTEX_POINT('',#28693); +#28693 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#28694 = LINE('',#28695,#28696); +#28695 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#28696 = VECTOR('',#28697,1.); +#28697 = DIRECTION('',(1.,0.,0.)); +#28698 = ORIENTED_EDGE('',*,*,#28699,.T.); +#28699 = EDGE_CURVE('',#28692,#28700,#28702,.T.); +#28700 = VERTEX_POINT('',#28701); +#28701 = CARTESIAN_POINT('',(-9.,-1.54,0.)); +#28702 = LINE('',#28703,#28704); +#28703 = CARTESIAN_POINT('',(-4.275,-1.54,0.)); +#28704 = VECTOR('',#28705,1.); +#28705 = DIRECTION('',(-1.,0.,0.)); +#28706 = ORIENTED_EDGE('',*,*,#28707,.F.); +#28707 = EDGE_CURVE('',#28708,#28700,#28710,.T.); +#28708 = VERTEX_POINT('',#28709); +#28709 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#28710 = LINE('',#28711,#28712); +#28711 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28712 = VECTOR('',#28713,1.); +#28713 = DIRECTION('',(0.,1.,0.)); +#28714 = ORIENTED_EDGE('',*,*,#28715,.T.); +#28715 = EDGE_CURVE('',#28708,#28716,#28718,.T.); +#28716 = VERTEX_POINT('',#28717); +#28717 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#28718 = LINE('',#28719,#28720); +#28719 = CARTESIAN_POINT('',(-4.5,-1.91,0.)); +#28720 = VECTOR('',#28721,1.); +#28721 = DIRECTION('',(1.,0.,0.)); +#28722 = ORIENTED_EDGE('',*,*,#28723,.T.); +#28723 = EDGE_CURVE('',#28716,#28724,#28726,.T.); +#28724 = VERTEX_POINT('',#28725); +#28725 = CARTESIAN_POINT('',(-8.15,-1.91,0.)); +#28726 = LINE('',#28727,#28728); +#28727 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#28728 = VECTOR('',#28729,1.); +#28729 = DIRECTION('',(1.,0.,0.)); +#28730 = ORIENTED_EDGE('',*,*,#28731,.T.); +#28731 = EDGE_CURVE('',#28724,#28732,#28734,.T.); +#28732 = VERTEX_POINT('',#28733); +#28733 = CARTESIAN_POINT('',(-8.15,-2.81,0.)); +#28734 = LINE('',#28735,#28736); +#28735 = CARTESIAN_POINT('',(-8.15,3.49,0.)); +#28736 = VECTOR('',#28737,1.); +#28737 = DIRECTION('',(0.,-1.,0.)); +#28738 = ORIENTED_EDGE('',*,*,#28739,.F.); +#28739 = EDGE_CURVE('',#28740,#28732,#28742,.T.); +#28740 = VERTEX_POINT('',#28741); +#28741 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#28742 = LINE('',#28743,#28744); +#28743 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#28744 = VECTOR('',#28745,1.); +#28745 = DIRECTION('',(1.,0.,0.)); +#28746 = ORIENTED_EDGE('',*,*,#28747,.T.); +#28747 = EDGE_CURVE('',#28740,#28748,#28750,.T.); +#28748 = VERTEX_POINT('',#28749); +#28749 = CARTESIAN_POINT('',(-9.,-2.81,0.)); +#28750 = LINE('',#28751,#28752); +#28751 = CARTESIAN_POINT('',(-4.275,-2.81,0.)); +#28752 = VECTOR('',#28753,1.); +#28753 = DIRECTION('',(-1.,0.,0.)); +#28754 = ORIENTED_EDGE('',*,*,#28755,.F.); +#28755 = EDGE_CURVE('',#28756,#28748,#28758,.T.); +#28756 = VERTEX_POINT('',#28757); +#28757 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#28758 = LINE('',#28759,#28760); +#28759 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28760 = VECTOR('',#28761,1.); +#28761 = DIRECTION('',(0.,1.,0.)); +#28762 = ORIENTED_EDGE('',*,*,#28763,.T.); +#28763 = EDGE_CURVE('',#28756,#28764,#28766,.T.); +#28764 = VERTEX_POINT('',#28765); +#28765 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#28766 = LINE('',#28767,#28768); +#28767 = CARTESIAN_POINT('',(-4.5,-3.18,0.)); +#28768 = VECTOR('',#28769,1.); +#28769 = DIRECTION('',(1.,0.,0.)); +#28770 = ORIENTED_EDGE('',*,*,#28771,.T.); +#28771 = EDGE_CURVE('',#28764,#28772,#28774,.T.); +#28772 = VERTEX_POINT('',#28773); +#28773 = CARTESIAN_POINT('',(-8.15,-3.18,0.)); +#28774 = LINE('',#28775,#28776); +#28775 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#28776 = VECTOR('',#28777,1.); +#28777 = DIRECTION('',(1.,0.,0.)); +#28778 = ORIENTED_EDGE('',*,*,#28779,.T.); +#28779 = EDGE_CURVE('',#28772,#28780,#28782,.T.); +#28780 = VERTEX_POINT('',#28781); +#28781 = CARTESIAN_POINT('',(-8.15,-4.08,0.)); +#28782 = LINE('',#28783,#28784); +#28783 = CARTESIAN_POINT('',(-8.15,2.22,0.)); +#28784 = VECTOR('',#28785,1.); +#28785 = DIRECTION('',(0.,-1.,0.)); +#28786 = ORIENTED_EDGE('',*,*,#28787,.F.); +#28787 = EDGE_CURVE('',#28788,#28780,#28790,.T.); +#28788 = VERTEX_POINT('',#28789); +#28789 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#28790 = LINE('',#28791,#28792); +#28791 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#28792 = VECTOR('',#28793,1.); +#28793 = DIRECTION('',(1.,0.,0.)); +#28794 = ORIENTED_EDGE('',*,*,#28795,.T.); +#28795 = EDGE_CURVE('',#28788,#28796,#28798,.T.); +#28796 = VERTEX_POINT('',#28797); +#28797 = CARTESIAN_POINT('',(-9.,-4.08,0.)); +#28798 = LINE('',#28799,#28800); +#28799 = CARTESIAN_POINT('',(-4.275,-4.08,0.)); +#28800 = VECTOR('',#28801,1.); +#28801 = DIRECTION('',(-1.,0.,0.)); +#28802 = ORIENTED_EDGE('',*,*,#28803,.F.); +#28803 = EDGE_CURVE('',#28804,#28796,#28806,.T.); +#28804 = VERTEX_POINT('',#28805); +#28805 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#28806 = LINE('',#28807,#28808); +#28807 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28808 = VECTOR('',#28809,1.); +#28809 = DIRECTION('',(0.,1.,0.)); +#28810 = ORIENTED_EDGE('',*,*,#28811,.T.); +#28811 = EDGE_CURVE('',#28804,#28812,#28814,.T.); +#28812 = VERTEX_POINT('',#28813); +#28813 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#28814 = LINE('',#28815,#28816); +#28815 = CARTESIAN_POINT('',(-4.5,-4.45,0.)); +#28816 = VECTOR('',#28817,1.); +#28817 = DIRECTION('',(1.,0.,0.)); +#28818 = ORIENTED_EDGE('',*,*,#28819,.T.); +#28819 = EDGE_CURVE('',#28812,#28820,#28822,.T.); +#28820 = VERTEX_POINT('',#28821); +#28821 = CARTESIAN_POINT('',(-8.15,-4.45,0.)); +#28822 = LINE('',#28823,#28824); +#28823 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#28824 = VECTOR('',#28825,1.); +#28825 = DIRECTION('',(1.,0.,0.)); +#28826 = ORIENTED_EDGE('',*,*,#28827,.T.); +#28827 = EDGE_CURVE('',#28820,#28828,#28830,.T.); +#28828 = VERTEX_POINT('',#28829); +#28829 = CARTESIAN_POINT('',(-8.15,-5.35,0.)); +#28830 = LINE('',#28831,#28832); +#28831 = CARTESIAN_POINT('',(-8.15,0.95,0.)); +#28832 = VECTOR('',#28833,1.); +#28833 = DIRECTION('',(0.,-1.,0.)); +#28834 = ORIENTED_EDGE('',*,*,#28835,.F.); +#28835 = EDGE_CURVE('',#28836,#28828,#28838,.T.); +#28836 = VERTEX_POINT('',#28837); +#28837 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#28838 = LINE('',#28839,#28840); +#28839 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#28840 = VECTOR('',#28841,1.); +#28841 = DIRECTION('',(1.,0.,0.)); +#28842 = ORIENTED_EDGE('',*,*,#28843,.T.); +#28843 = EDGE_CURVE('',#28836,#28844,#28846,.T.); +#28844 = VERTEX_POINT('',#28845); +#28845 = CARTESIAN_POINT('',(-9.,-5.35,0.)); +#28846 = LINE('',#28847,#28848); +#28847 = CARTESIAN_POINT('',(-4.275,-5.35,0.)); +#28848 = VECTOR('',#28849,1.); +#28849 = DIRECTION('',(-1.,0.,0.)); +#28850 = ORIENTED_EDGE('',*,*,#28851,.F.); +#28851 = EDGE_CURVE('',#28852,#28844,#28854,.T.); +#28852 = VERTEX_POINT('',#28853); +#28853 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#28854 = LINE('',#28855,#28856); +#28855 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28856 = VECTOR('',#28857,1.); +#28857 = DIRECTION('',(0.,1.,0.)); +#28858 = ORIENTED_EDGE('',*,*,#28859,.T.); +#28859 = EDGE_CURVE('',#28852,#28860,#28862,.T.); +#28860 = VERTEX_POINT('',#28861); +#28861 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#28862 = LINE('',#28863,#28864); +#28863 = CARTESIAN_POINT('',(-4.5,-5.72,0.)); +#28864 = VECTOR('',#28865,1.); +#28865 = DIRECTION('',(1.,0.,0.)); +#28866 = ORIENTED_EDGE('',*,*,#28867,.T.); +#28867 = EDGE_CURVE('',#28860,#28868,#28870,.T.); +#28868 = VERTEX_POINT('',#28869); +#28869 = CARTESIAN_POINT('',(-8.15,-5.72,0.)); +#28870 = LINE('',#28871,#28872); +#28871 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#28872 = VECTOR('',#28873,1.); +#28873 = DIRECTION('',(1.,0.,0.)); +#28874 = ORIENTED_EDGE('',*,*,#28875,.T.); +#28875 = EDGE_CURVE('',#28868,#28876,#28878,.T.); +#28876 = VERTEX_POINT('',#28877); +#28877 = CARTESIAN_POINT('',(-8.15,-6.62,0.)); +#28878 = LINE('',#28879,#28880); +#28879 = CARTESIAN_POINT('',(-8.15,-0.32,0.)); +#28880 = VECTOR('',#28881,1.); +#28881 = DIRECTION('',(0.,-1.,0.)); +#28882 = ORIENTED_EDGE('',*,*,#28883,.F.); +#28883 = EDGE_CURVE('',#28884,#28876,#28886,.T.); +#28884 = VERTEX_POINT('',#28885); +#28885 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#28886 = LINE('',#28887,#28888); +#28887 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#28888 = VECTOR('',#28889,1.); +#28889 = DIRECTION('',(1.,0.,0.)); +#28890 = ORIENTED_EDGE('',*,*,#28891,.T.); +#28891 = EDGE_CURVE('',#28884,#28892,#28894,.T.); +#28892 = VERTEX_POINT('',#28893); +#28893 = CARTESIAN_POINT('',(-9.,-6.62,0.)); +#28894 = LINE('',#28895,#28896); +#28895 = CARTESIAN_POINT('',(-4.275,-6.62,0.)); +#28896 = VECTOR('',#28897,1.); +#28897 = DIRECTION('',(-1.,0.,0.)); +#28898 = ORIENTED_EDGE('',*,*,#28899,.F.); +#28899 = EDGE_CURVE('',#28900,#28892,#28902,.T.); +#28900 = VERTEX_POINT('',#28901); +#28901 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#28902 = LINE('',#28903,#28904); +#28903 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28904 = VECTOR('',#28905,1.); +#28905 = DIRECTION('',(0.,1.,0.)); +#28906 = ORIENTED_EDGE('',*,*,#28907,.T.); +#28907 = EDGE_CURVE('',#28900,#28908,#28910,.T.); +#28908 = VERTEX_POINT('',#28909); +#28909 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#28910 = LINE('',#28911,#28912); +#28911 = CARTESIAN_POINT('',(-4.5,-6.99,0.)); +#28912 = VECTOR('',#28913,1.); +#28913 = DIRECTION('',(1.,0.,0.)); +#28914 = ORIENTED_EDGE('',*,*,#28915,.T.); +#28915 = EDGE_CURVE('',#28908,#28916,#28918,.T.); +#28916 = VERTEX_POINT('',#28917); +#28917 = CARTESIAN_POINT('',(-8.15,-6.99,0.)); +#28918 = LINE('',#28919,#28920); +#28919 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#28920 = VECTOR('',#28921,1.); +#28921 = DIRECTION('',(1.,0.,0.)); +#28922 = ORIENTED_EDGE('',*,*,#28923,.T.); +#28923 = EDGE_CURVE('',#28916,#28924,#28926,.T.); +#28924 = VERTEX_POINT('',#28925); +#28925 = CARTESIAN_POINT('',(-8.15,-7.89,0.)); +#28926 = LINE('',#28927,#28928); +#28927 = CARTESIAN_POINT('',(-8.15,-1.59,0.)); +#28928 = VECTOR('',#28929,1.); +#28929 = DIRECTION('',(0.,-1.,0.)); +#28930 = ORIENTED_EDGE('',*,*,#28931,.F.); +#28931 = EDGE_CURVE('',#28932,#28924,#28934,.T.); +#28932 = VERTEX_POINT('',#28933); +#28933 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#28934 = LINE('',#28935,#28936); +#28935 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#28936 = VECTOR('',#28937,1.); +#28937 = DIRECTION('',(1.,0.,0.)); +#28938 = ORIENTED_EDGE('',*,*,#28939,.T.); +#28939 = EDGE_CURVE('',#28932,#28940,#28942,.T.); +#28940 = VERTEX_POINT('',#28941); +#28941 = CARTESIAN_POINT('',(-9.,-7.89,0.)); +#28942 = LINE('',#28943,#28944); +#28943 = CARTESIAN_POINT('',(-4.275,-7.89,0.)); +#28944 = VECTOR('',#28945,1.); +#28945 = DIRECTION('',(-1.,0.,0.)); +#28946 = ORIENTED_EDGE('',*,*,#28947,.F.); +#28947 = EDGE_CURVE('',#28948,#28940,#28950,.T.); +#28948 = VERTEX_POINT('',#28949); +#28949 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#28950 = LINE('',#28951,#28952); +#28951 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#28952 = VECTOR('',#28953,1.); +#28953 = DIRECTION('',(0.,1.,0.)); +#28954 = ORIENTED_EDGE('',*,*,#28955,.T.); +#28955 = EDGE_CURVE('',#28948,#28956,#28958,.T.); +#28956 = VERTEX_POINT('',#28957); +#28957 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#28958 = LINE('',#28959,#28960); +#28959 = CARTESIAN_POINT('',(-4.5,-8.26,0.)); +#28960 = VECTOR('',#28961,1.); +#28961 = DIRECTION('',(1.,0.,0.)); +#28962 = ORIENTED_EDGE('',*,*,#28963,.T.); +#28963 = EDGE_CURVE('',#28956,#28964,#28966,.T.); +#28964 = VERTEX_POINT('',#28965); +#28965 = CARTESIAN_POINT('',(-8.15,-8.26,0.)); +#28966 = LINE('',#28967,#28968); +#28967 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#28968 = VECTOR('',#28969,1.); +#28969 = DIRECTION('',(1.,0.,0.)); +#28970 = ORIENTED_EDGE('',*,*,#28971,.T.); +#28971 = EDGE_CURVE('',#28964,#28972,#28974,.T.); +#28972 = VERTEX_POINT('',#28973); +#28973 = CARTESIAN_POINT('',(-8.15,-9.16,0.)); +#28974 = LINE('',#28975,#28976); +#28975 = CARTESIAN_POINT('',(-8.15,-2.86,0.)); +#28976 = VECTOR('',#28977,1.); +#28977 = DIRECTION('',(0.,-1.,0.)); +#28978 = ORIENTED_EDGE('',*,*,#28979,.F.); +#28979 = EDGE_CURVE('',#28980,#28972,#28982,.T.); +#28980 = VERTEX_POINT('',#28981); +#28981 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#28982 = LINE('',#28983,#28984); +#28983 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#28984 = VECTOR('',#28985,1.); +#28985 = DIRECTION('',(1.,0.,0.)); +#28986 = ORIENTED_EDGE('',*,*,#28987,.T.); +#28987 = EDGE_CURVE('',#28980,#28988,#28990,.T.); +#28988 = VERTEX_POINT('',#28989); +#28989 = CARTESIAN_POINT('',(-9.,-9.16,0.)); +#28990 = LINE('',#28991,#28992); +#28991 = CARTESIAN_POINT('',(-4.275,-9.16,0.)); +#28992 = VECTOR('',#28993,1.); +#28993 = DIRECTION('',(-1.,0.,0.)); +#28994 = ORIENTED_EDGE('',*,*,#28995,.F.); +#28995 = EDGE_CURVE('',#28996,#28988,#28998,.T.); +#28996 = VERTEX_POINT('',#28997); +#28997 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#28998 = LINE('',#28999,#29000); +#28999 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#29000 = VECTOR('',#29001,1.); +#29001 = DIRECTION('',(0.,1.,0.)); +#29002 = ORIENTED_EDGE('',*,*,#29003,.T.); +#29003 = EDGE_CURVE('',#28996,#29004,#29006,.T.); +#29004 = VERTEX_POINT('',#29005); +#29005 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#29006 = LINE('',#29007,#29008); +#29007 = CARTESIAN_POINT('',(-4.5,-9.53,0.)); +#29008 = VECTOR('',#29009,1.); +#29009 = DIRECTION('',(1.,0.,0.)); +#29010 = ORIENTED_EDGE('',*,*,#29011,.T.); +#29011 = EDGE_CURVE('',#29004,#29012,#29014,.T.); +#29012 = VERTEX_POINT('',#29013); +#29013 = CARTESIAN_POINT('',(-8.15,-9.53,0.)); +#29014 = LINE('',#29015,#29016); +#29015 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#29016 = VECTOR('',#29017,1.); +#29017 = DIRECTION('',(1.,0.,0.)); +#29018 = ORIENTED_EDGE('',*,*,#29019,.T.); +#29019 = EDGE_CURVE('',#29012,#29020,#29022,.T.); +#29020 = VERTEX_POINT('',#29021); +#29021 = CARTESIAN_POINT('',(-8.15,-10.43,0.)); +#29022 = LINE('',#29023,#29024); +#29023 = CARTESIAN_POINT('',(-8.15,-4.13,0.)); +#29024 = VECTOR('',#29025,1.); +#29025 = DIRECTION('',(0.,-1.,0.)); +#29026 = ORIENTED_EDGE('',*,*,#29027,.F.); +#29027 = EDGE_CURVE('',#29028,#29020,#29030,.T.); +#29028 = VERTEX_POINT('',#29029); +#29029 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#29030 = LINE('',#29031,#29032); +#29031 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#29032 = VECTOR('',#29033,1.); +#29033 = DIRECTION('',(1.,0.,0.)); +#29034 = ORIENTED_EDGE('',*,*,#29035,.T.); +#29035 = EDGE_CURVE('',#29028,#29036,#29038,.T.); +#29036 = VERTEX_POINT('',#29037); +#29037 = CARTESIAN_POINT('',(-9.,-10.43,0.)); +#29038 = LINE('',#29039,#29040); +#29039 = CARTESIAN_POINT('',(-4.275,-10.43,0.)); +#29040 = VECTOR('',#29041,1.); +#29041 = DIRECTION('',(-1.,0.,0.)); +#29042 = ORIENTED_EDGE('',*,*,#29043,.F.); +#29043 = EDGE_CURVE('',#29044,#29036,#29046,.T.); +#29044 = VERTEX_POINT('',#29045); +#29045 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#29046 = LINE('',#29047,#29048); +#29047 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#29048 = VECTOR('',#29049,1.); +#29049 = DIRECTION('',(0.,1.,0.)); +#29050 = ORIENTED_EDGE('',*,*,#29051,.T.); +#29051 = EDGE_CURVE('',#29044,#29052,#29054,.T.); +#29052 = VERTEX_POINT('',#29053); +#29053 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#29054 = LINE('',#29055,#29056); +#29055 = CARTESIAN_POINT('',(-4.5,-10.8,0.)); +#29056 = VECTOR('',#29057,1.); +#29057 = DIRECTION('',(1.,0.,0.)); +#29058 = ORIENTED_EDGE('',*,*,#29059,.T.); +#29059 = EDGE_CURVE('',#29052,#29060,#29062,.T.); +#29060 = VERTEX_POINT('',#29061); +#29061 = CARTESIAN_POINT('',(-8.15,-10.8,0.)); +#29062 = LINE('',#29063,#29064); +#29063 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#29064 = VECTOR('',#29065,1.); +#29065 = DIRECTION('',(1.,0.,0.)); +#29066 = ORIENTED_EDGE('',*,*,#29067,.T.); +#29067 = EDGE_CURVE('',#29060,#29068,#29070,.T.); +#29068 = VERTEX_POINT('',#29069); +#29069 = CARTESIAN_POINT('',(-8.15,-11.7,0.)); +#29070 = LINE('',#29071,#29072); +#29071 = CARTESIAN_POINT('',(-8.15,-5.4,0.)); +#29072 = VECTOR('',#29073,1.); +#29073 = DIRECTION('',(0.,-1.,0.)); +#29074 = ORIENTED_EDGE('',*,*,#29075,.F.); +#29075 = EDGE_CURVE('',#29076,#29068,#29078,.T.); +#29076 = VERTEX_POINT('',#29077); +#29077 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#29078 = LINE('',#29079,#29080); +#29079 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#29080 = VECTOR('',#29081,1.); +#29081 = DIRECTION('',(1.,0.,0.)); +#29082 = ORIENTED_EDGE('',*,*,#29083,.T.); +#29083 = EDGE_CURVE('',#29076,#29084,#29086,.T.); +#29084 = VERTEX_POINT('',#29085); +#29085 = CARTESIAN_POINT('',(-9.,-11.7,0.)); +#29086 = LINE('',#29087,#29088); +#29087 = CARTESIAN_POINT('',(-4.275,-11.7,0.)); +#29088 = VECTOR('',#29089,1.); +#29089 = DIRECTION('',(-1.,0.,0.)); +#29090 = ORIENTED_EDGE('',*,*,#29091,.F.); +#29091 = EDGE_CURVE('',#29092,#29084,#29094,.T.); +#29092 = VERTEX_POINT('',#29093); +#29093 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#29094 = LINE('',#29095,#29096); +#29095 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#29096 = VECTOR('',#29097,1.); +#29097 = DIRECTION('',(0.,1.,0.)); +#29098 = ORIENTED_EDGE('',*,*,#29099,.F.); +#29099 = EDGE_CURVE('',#29100,#29092,#29102,.T.); +#29100 = VERTEX_POINT('',#29101); +#29101 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#29102 = LINE('',#29103,#29104); +#29103 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29104 = VECTOR('',#29105,1.); +#29105 = DIRECTION('',(-1.,0.,0.)); +#29106 = ORIENTED_EDGE('',*,*,#29107,.T.); +#29107 = EDGE_CURVE('',#29100,#29108,#29110,.T.); +#29108 = VERTEX_POINT('',#29109); +#29109 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#29110 = LINE('',#29111,#29112); +#29111 = CARTESIAN_POINT('',(-6.165,-6.375,0.)); +#29112 = VECTOR('',#29113,1.); +#29113 = DIRECTION('',(0.,1.,0.)); +#29114 = ORIENTED_EDGE('',*,*,#29115,.T.); +#29115 = EDGE_CURVE('',#29108,#29116,#29118,.T.); +#29116 = VERTEX_POINT('',#29117); +#29117 = CARTESIAN_POINT('',(-6.165,-11.9,0.)); +#29118 = LINE('',#29119,#29120); +#29119 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#29120 = VECTOR('',#29121,1.); +#29121 = DIRECTION('',(0.,1.,0.)); +#29122 = ORIENTED_EDGE('',*,*,#29123,.T.); +#29123 = EDGE_CURVE('',#29116,#29124,#29126,.T.); +#29124 = VERTEX_POINT('',#29125); +#29125 = CARTESIAN_POINT('',(-5.265,-11.9,0.)); +#29126 = LINE('',#29127,#29128); +#29127 = CARTESIAN_POINT('',(-5.6225,-11.9,0.)); +#29128 = VECTOR('',#29129,1.); +#29129 = DIRECTION('',(1.,0.,0.)); +#29130 = ORIENTED_EDGE('',*,*,#29131,.F.); +#29131 = EDGE_CURVE('',#29132,#29124,#29134,.T.); +#29132 = VERTEX_POINT('',#29133); +#29133 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#29134 = LINE('',#29135,#29136); +#29135 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#29136 = VECTOR('',#29137,1.); +#29137 = DIRECTION('',(0.,1.,0.)); +#29138 = ORIENTED_EDGE('',*,*,#29139,.T.); +#29139 = EDGE_CURVE('',#29132,#29140,#29142,.T.); +#29140 = VERTEX_POINT('',#29141); +#29141 = CARTESIAN_POINT('',(-5.265,-12.75,0.)); +#29142 = LINE('',#29143,#29144); +#29143 = CARTESIAN_POINT('',(-5.265,-6.15,0.)); +#29144 = VECTOR('',#29145,1.); +#29145 = DIRECTION('',(0.,-1.,0.)); +#29146 = ORIENTED_EDGE('',*,*,#29147,.F.); +#29147 = EDGE_CURVE('',#29148,#29140,#29150,.T.); +#29148 = VERTEX_POINT('',#29149); +#29149 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#29150 = LINE('',#29151,#29152); +#29151 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29152 = VECTOR('',#29153,1.); +#29153 = DIRECTION('',(-1.,0.,0.)); +#29154 = ORIENTED_EDGE('',*,*,#29155,.T.); +#29155 = EDGE_CURVE('',#29148,#29156,#29158,.T.); +#29156 = VERTEX_POINT('',#29157); +#29157 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#29158 = LINE('',#29159,#29160); +#29159 = CARTESIAN_POINT('',(-4.895,-6.375,0.)); +#29160 = VECTOR('',#29161,1.); +#29161 = DIRECTION('',(0.,1.,0.)); +#29162 = ORIENTED_EDGE('',*,*,#29163,.T.); +#29163 = EDGE_CURVE('',#29156,#29164,#29166,.T.); +#29164 = VERTEX_POINT('',#29165); +#29165 = CARTESIAN_POINT('',(-4.895,-11.9,0.)); +#29166 = LINE('',#29167,#29168); +#29167 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#29168 = VECTOR('',#29169,1.); +#29169 = DIRECTION('',(0.,1.,0.)); +#29170 = ORIENTED_EDGE('',*,*,#29171,.T.); +#29171 = EDGE_CURVE('',#29164,#29172,#29174,.T.); +#29172 = VERTEX_POINT('',#29173); +#29173 = CARTESIAN_POINT('',(-3.995,-11.9,0.)); +#29174 = LINE('',#29175,#29176); +#29175 = CARTESIAN_POINT('',(-4.3525,-11.9,0.)); +#29176 = VECTOR('',#29177,1.); +#29177 = DIRECTION('',(1.,0.,0.)); +#29178 = ORIENTED_EDGE('',*,*,#29179,.F.); +#29179 = EDGE_CURVE('',#29180,#29172,#29182,.T.); +#29180 = VERTEX_POINT('',#29181); +#29181 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#29182 = LINE('',#29183,#29184); +#29183 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#29184 = VECTOR('',#29185,1.); +#29185 = DIRECTION('',(0.,1.,0.)); +#29186 = ORIENTED_EDGE('',*,*,#29187,.T.); +#29187 = EDGE_CURVE('',#29180,#29188,#29190,.T.); +#29188 = VERTEX_POINT('',#29189); +#29189 = CARTESIAN_POINT('',(-3.995,-12.75,0.)); +#29190 = LINE('',#29191,#29192); +#29191 = CARTESIAN_POINT('',(-3.995,-6.15,0.)); +#29192 = VECTOR('',#29193,1.); +#29193 = DIRECTION('',(0.,-1.,0.)); +#29194 = ORIENTED_EDGE('',*,*,#29195,.F.); +#29195 = EDGE_CURVE('',#29196,#29188,#29198,.T.); +#29196 = VERTEX_POINT('',#29197); +#29197 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#29198 = LINE('',#29199,#29200); +#29199 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29200 = VECTOR('',#29201,1.); +#29201 = DIRECTION('',(-1.,0.,0.)); +#29202 = ORIENTED_EDGE('',*,*,#29203,.T.); +#29203 = EDGE_CURVE('',#29196,#29204,#29206,.T.); +#29204 = VERTEX_POINT('',#29205); +#29205 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#29206 = LINE('',#29207,#29208); +#29207 = CARTESIAN_POINT('',(-3.625,-6.375,0.)); +#29208 = VECTOR('',#29209,1.); +#29209 = DIRECTION('',(0.,1.,0.)); +#29210 = ORIENTED_EDGE('',*,*,#29211,.T.); +#29211 = EDGE_CURVE('',#29204,#29212,#29214,.T.); +#29212 = VERTEX_POINT('',#29213); +#29213 = CARTESIAN_POINT('',(-3.625,-11.9,0.)); +#29214 = LINE('',#29215,#29216); +#29215 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#29216 = VECTOR('',#29217,1.); +#29217 = DIRECTION('',(0.,1.,0.)); +#29218 = ORIENTED_EDGE('',*,*,#29219,.T.); +#29219 = EDGE_CURVE('',#29212,#29220,#29222,.T.); +#29220 = VERTEX_POINT('',#29221); +#29221 = CARTESIAN_POINT('',(-2.725,-11.9,0.)); +#29222 = LINE('',#29223,#29224); +#29223 = CARTESIAN_POINT('',(-3.0825,-11.9,0.)); +#29224 = VECTOR('',#29225,1.); +#29225 = DIRECTION('',(1.,0.,0.)); +#29226 = ORIENTED_EDGE('',*,*,#29227,.F.); +#29227 = EDGE_CURVE('',#29228,#29220,#29230,.T.); +#29228 = VERTEX_POINT('',#29229); +#29229 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#29230 = LINE('',#29231,#29232); +#29231 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#29232 = VECTOR('',#29233,1.); +#29233 = DIRECTION('',(0.,1.,0.)); +#29234 = ORIENTED_EDGE('',*,*,#29235,.T.); +#29235 = EDGE_CURVE('',#29228,#29236,#29238,.T.); +#29236 = VERTEX_POINT('',#29237); +#29237 = CARTESIAN_POINT('',(-2.725,-12.75,0.)); +#29238 = LINE('',#29239,#29240); +#29239 = CARTESIAN_POINT('',(-2.725,-6.15,0.)); +#29240 = VECTOR('',#29241,1.); +#29241 = DIRECTION('',(0.,-1.,0.)); +#29242 = ORIENTED_EDGE('',*,*,#29243,.F.); +#29243 = EDGE_CURVE('',#29244,#29236,#29246,.T.); +#29244 = VERTEX_POINT('',#29245); +#29245 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#29246 = LINE('',#29247,#29248); +#29247 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29248 = VECTOR('',#29249,1.); +#29249 = DIRECTION('',(-1.,0.,0.)); +#29250 = ORIENTED_EDGE('',*,*,#29251,.T.); +#29251 = EDGE_CURVE('',#29244,#29252,#29254,.T.); +#29252 = VERTEX_POINT('',#29253); +#29253 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#29254 = LINE('',#29255,#29256); +#29255 = CARTESIAN_POINT('',(-2.355,-6.375,0.)); +#29256 = VECTOR('',#29257,1.); +#29257 = DIRECTION('',(0.,1.,0.)); +#29258 = ORIENTED_EDGE('',*,*,#29259,.T.); +#29259 = EDGE_CURVE('',#29252,#29260,#29262,.T.); +#29260 = VERTEX_POINT('',#29261); +#29261 = CARTESIAN_POINT('',(-2.355,-11.9,0.)); +#29262 = LINE('',#29263,#29264); +#29263 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#29264 = VECTOR('',#29265,1.); +#29265 = DIRECTION('',(0.,1.,0.)); +#29266 = ORIENTED_EDGE('',*,*,#29267,.T.); +#29267 = EDGE_CURVE('',#29260,#29268,#29270,.T.); +#29268 = VERTEX_POINT('',#29269); +#29269 = CARTESIAN_POINT('',(-1.455,-11.9,0.)); +#29270 = LINE('',#29271,#29272); +#29271 = CARTESIAN_POINT('',(-1.8125,-11.9,0.)); +#29272 = VECTOR('',#29273,1.); +#29273 = DIRECTION('',(1.,0.,0.)); +#29274 = ORIENTED_EDGE('',*,*,#29275,.F.); +#29275 = EDGE_CURVE('',#29276,#29268,#29278,.T.); +#29276 = VERTEX_POINT('',#29277); +#29277 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#29278 = LINE('',#29279,#29280); +#29279 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#29280 = VECTOR('',#29281,1.); +#29281 = DIRECTION('',(0.,1.,0.)); +#29282 = ORIENTED_EDGE('',*,*,#29283,.T.); +#29283 = EDGE_CURVE('',#29276,#29284,#29286,.T.); +#29284 = VERTEX_POINT('',#29285); +#29285 = CARTESIAN_POINT('',(-1.455,-12.75,0.)); +#29286 = LINE('',#29287,#29288); +#29287 = CARTESIAN_POINT('',(-1.455,-6.15,0.)); +#29288 = VECTOR('',#29289,1.); +#29289 = DIRECTION('',(0.,-1.,0.)); +#29290 = ORIENTED_EDGE('',*,*,#29291,.F.); +#29291 = EDGE_CURVE('',#29292,#29284,#29294,.T.); +#29292 = VERTEX_POINT('',#29293); +#29293 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#29294 = LINE('',#29295,#29296); +#29295 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29296 = VECTOR('',#29297,1.); +#29297 = DIRECTION('',(-1.,0.,0.)); +#29298 = ORIENTED_EDGE('',*,*,#29299,.T.); +#29299 = EDGE_CURVE('',#29292,#29300,#29302,.T.); +#29300 = VERTEX_POINT('',#29301); +#29301 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#29302 = LINE('',#29303,#29304); +#29303 = CARTESIAN_POINT('',(-1.085,-6.375,0.)); +#29304 = VECTOR('',#29305,1.); +#29305 = DIRECTION('',(0.,1.,0.)); +#29306 = ORIENTED_EDGE('',*,*,#29307,.T.); +#29307 = EDGE_CURVE('',#29300,#29308,#29310,.T.); +#29308 = VERTEX_POINT('',#29309); +#29309 = CARTESIAN_POINT('',(-1.085,-11.9,0.)); +#29310 = LINE('',#29311,#29312); +#29311 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#29312 = VECTOR('',#29313,1.); +#29313 = DIRECTION('',(0.,1.,0.)); +#29314 = ORIENTED_EDGE('',*,*,#29315,.T.); +#29315 = EDGE_CURVE('',#29308,#29316,#29318,.T.); +#29316 = VERTEX_POINT('',#29317); +#29317 = CARTESIAN_POINT('',(-0.185,-11.9,0.)); +#29318 = LINE('',#29319,#29320); +#29319 = CARTESIAN_POINT('',(-0.5425,-11.9,0.)); +#29320 = VECTOR('',#29321,1.); +#29321 = DIRECTION('',(1.,0.,0.)); +#29322 = ORIENTED_EDGE('',*,*,#29323,.F.); +#29323 = EDGE_CURVE('',#29324,#29316,#29326,.T.); +#29324 = VERTEX_POINT('',#29325); +#29325 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#29326 = LINE('',#29327,#29328); +#29327 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#29328 = VECTOR('',#29329,1.); +#29329 = DIRECTION('',(0.,1.,0.)); +#29330 = ORIENTED_EDGE('',*,*,#29331,.T.); +#29331 = EDGE_CURVE('',#29324,#29332,#29334,.T.); +#29332 = VERTEX_POINT('',#29333); +#29333 = CARTESIAN_POINT('',(-0.185,-12.75,0.)); +#29334 = LINE('',#29335,#29336); +#29335 = CARTESIAN_POINT('',(-0.185,-6.15,0.)); +#29336 = VECTOR('',#29337,1.); +#29337 = DIRECTION('',(0.,-1.,0.)); +#29338 = ORIENTED_EDGE('',*,*,#29339,.F.); +#29339 = EDGE_CURVE('',#29340,#29332,#29342,.T.); +#29340 = VERTEX_POINT('',#29341); +#29341 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#29342 = LINE('',#29343,#29344); +#29343 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29344 = VECTOR('',#29345,1.); +#29345 = DIRECTION('',(-1.,0.,0.)); +#29346 = ORIENTED_EDGE('',*,*,#29347,.F.); +#29347 = EDGE_CURVE('',#29348,#29340,#29350,.T.); +#29348 = VERTEX_POINT('',#29349); +#29349 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#29350 = LINE('',#29351,#29352); +#29351 = CARTESIAN_POINT('',(0.185,-6.15,0.)); +#29352 = VECTOR('',#29353,1.); +#29353 = DIRECTION('',(0.,-1.,0.)); +#29354 = ORIENTED_EDGE('',*,*,#29355,.T.); +#29355 = EDGE_CURVE('',#29348,#29356,#29358,.T.); +#29356 = VERTEX_POINT('',#29357); +#29357 = CARTESIAN_POINT('',(0.185,-11.9,0.)); +#29358 = LINE('',#29359,#29360); +#29359 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#29360 = VECTOR('',#29361,1.); +#29361 = DIRECTION('',(0.,1.,0.)); +#29362 = ORIENTED_EDGE('',*,*,#29363,.F.); +#29363 = EDGE_CURVE('',#29364,#29356,#29366,.T.); +#29364 = VERTEX_POINT('',#29365); +#29365 = CARTESIAN_POINT('',(1.085,-11.9,0.)); +#29366 = LINE('',#29367,#29368); +#29367 = CARTESIAN_POINT('',(0.5425,-11.9,0.)); +#29368 = VECTOR('',#29369,1.); +#29369 = DIRECTION('',(-1.,-0.,-0.)); +#29370 = ORIENTED_EDGE('',*,*,#29371,.F.); +#29371 = EDGE_CURVE('',#29372,#29364,#29374,.T.); +#29372 = VERTEX_POINT('',#29373); +#29373 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#29374 = LINE('',#29375,#29376); +#29375 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#29376 = VECTOR('',#29377,1.); +#29377 = DIRECTION('',(0.,1.,0.)); +#29378 = ORIENTED_EDGE('',*,*,#29379,.F.); +#29379 = EDGE_CURVE('',#29380,#29372,#29382,.T.); +#29380 = VERTEX_POINT('',#29381); +#29381 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#29382 = LINE('',#29383,#29384); +#29383 = CARTESIAN_POINT('',(1.085,-6.375,0.)); +#29384 = VECTOR('',#29385,1.); +#29385 = DIRECTION('',(0.,1.,0.)); +#29386 = ORIENTED_EDGE('',*,*,#29387,.F.); +#29387 = EDGE_CURVE('',#29388,#29380,#29390,.T.); +#29388 = VERTEX_POINT('',#29389); +#29389 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#29390 = LINE('',#29391,#29392); +#29391 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29392 = VECTOR('',#29393,1.); +#29393 = DIRECTION('',(-1.,0.,0.)); +#29394 = ORIENTED_EDGE('',*,*,#29395,.F.); +#29395 = EDGE_CURVE('',#29396,#29388,#29398,.T.); +#29396 = VERTEX_POINT('',#29397); +#29397 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#29398 = LINE('',#29399,#29400); +#29399 = CARTESIAN_POINT('',(1.455,-6.15,0.)); +#29400 = VECTOR('',#29401,1.); +#29401 = DIRECTION('',(0.,-1.,0.)); +#29402 = ORIENTED_EDGE('',*,*,#29403,.T.); +#29403 = EDGE_CURVE('',#29396,#29404,#29406,.T.); +#29404 = VERTEX_POINT('',#29405); +#29405 = CARTESIAN_POINT('',(1.455,-11.9,0.)); +#29406 = LINE('',#29407,#29408); +#29407 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#29408 = VECTOR('',#29409,1.); +#29409 = DIRECTION('',(0.,1.,0.)); +#29410 = ORIENTED_EDGE('',*,*,#29411,.F.); +#29411 = EDGE_CURVE('',#29412,#29404,#29414,.T.); +#29412 = VERTEX_POINT('',#29413); +#29413 = CARTESIAN_POINT('',(2.355,-11.9,0.)); +#29414 = LINE('',#29415,#29416); +#29415 = CARTESIAN_POINT('',(1.8125,-11.9,0.)); +#29416 = VECTOR('',#29417,1.); +#29417 = DIRECTION('',(-1.,-0.,-0.)); +#29418 = ORIENTED_EDGE('',*,*,#29419,.F.); +#29419 = EDGE_CURVE('',#29420,#29412,#29422,.T.); +#29420 = VERTEX_POINT('',#29421); +#29421 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#29422 = LINE('',#29423,#29424); +#29423 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#29424 = VECTOR('',#29425,1.); +#29425 = DIRECTION('',(0.,1.,0.)); +#29426 = ORIENTED_EDGE('',*,*,#29427,.F.); +#29427 = EDGE_CURVE('',#29428,#29420,#29430,.T.); +#29428 = VERTEX_POINT('',#29429); +#29429 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#29430 = LINE('',#29431,#29432); +#29431 = CARTESIAN_POINT('',(2.355,-6.375,0.)); +#29432 = VECTOR('',#29433,1.); +#29433 = DIRECTION('',(0.,1.,0.)); +#29434 = ORIENTED_EDGE('',*,*,#29435,.F.); +#29435 = EDGE_CURVE('',#29436,#29428,#29438,.T.); +#29436 = VERTEX_POINT('',#29437); +#29437 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#29438 = LINE('',#29439,#29440); +#29439 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29440 = VECTOR('',#29441,1.); +#29441 = DIRECTION('',(-1.,0.,0.)); +#29442 = ORIENTED_EDGE('',*,*,#29443,.F.); +#29443 = EDGE_CURVE('',#29444,#29436,#29446,.T.); +#29444 = VERTEX_POINT('',#29445); +#29445 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#29446 = LINE('',#29447,#29448); +#29447 = CARTESIAN_POINT('',(2.725,-6.15,0.)); +#29448 = VECTOR('',#29449,1.); +#29449 = DIRECTION('',(0.,-1.,0.)); +#29450 = ORIENTED_EDGE('',*,*,#29451,.T.); +#29451 = EDGE_CURVE('',#29444,#29452,#29454,.T.); +#29452 = VERTEX_POINT('',#29453); +#29453 = CARTESIAN_POINT('',(2.725,-11.9,0.)); +#29454 = LINE('',#29455,#29456); +#29455 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#29456 = VECTOR('',#29457,1.); +#29457 = DIRECTION('',(0.,1.,0.)); +#29458 = ORIENTED_EDGE('',*,*,#29459,.F.); +#29459 = EDGE_CURVE('',#29460,#29452,#29462,.T.); +#29460 = VERTEX_POINT('',#29461); +#29461 = CARTESIAN_POINT('',(3.625,-11.9,0.)); +#29462 = LINE('',#29463,#29464); +#29463 = CARTESIAN_POINT('',(3.0825,-11.9,0.)); +#29464 = VECTOR('',#29465,1.); +#29465 = DIRECTION('',(-1.,-0.,-0.)); +#29466 = ORIENTED_EDGE('',*,*,#29467,.F.); +#29467 = EDGE_CURVE('',#29468,#29460,#29470,.T.); +#29468 = VERTEX_POINT('',#29469); +#29469 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#29470 = LINE('',#29471,#29472); +#29471 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#29472 = VECTOR('',#29473,1.); +#29473 = DIRECTION('',(0.,1.,0.)); +#29474 = ORIENTED_EDGE('',*,*,#29475,.F.); +#29475 = EDGE_CURVE('',#29476,#29468,#29478,.T.); +#29476 = VERTEX_POINT('',#29477); +#29477 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#29478 = LINE('',#29479,#29480); +#29479 = CARTESIAN_POINT('',(3.625,-6.375,0.)); +#29480 = VECTOR('',#29481,1.); +#29481 = DIRECTION('',(0.,1.,0.)); +#29482 = ORIENTED_EDGE('',*,*,#29483,.F.); +#29483 = EDGE_CURVE('',#29484,#29476,#29486,.T.); +#29484 = VERTEX_POINT('',#29485); +#29485 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#29486 = LINE('',#29487,#29488); +#29487 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29488 = VECTOR('',#29489,1.); +#29489 = DIRECTION('',(-1.,0.,0.)); +#29490 = ORIENTED_EDGE('',*,*,#29491,.F.); +#29491 = EDGE_CURVE('',#29492,#29484,#29494,.T.); +#29492 = VERTEX_POINT('',#29493); +#29493 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#29494 = LINE('',#29495,#29496); +#29495 = CARTESIAN_POINT('',(3.995,-6.15,0.)); +#29496 = VECTOR('',#29497,1.); +#29497 = DIRECTION('',(0.,-1.,0.)); +#29498 = ORIENTED_EDGE('',*,*,#29499,.T.); +#29499 = EDGE_CURVE('',#29492,#29500,#29502,.T.); +#29500 = VERTEX_POINT('',#29501); +#29501 = CARTESIAN_POINT('',(3.995,-11.9,0.)); +#29502 = LINE('',#29503,#29504); +#29503 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#29504 = VECTOR('',#29505,1.); +#29505 = DIRECTION('',(0.,1.,0.)); +#29506 = ORIENTED_EDGE('',*,*,#29507,.F.); +#29507 = EDGE_CURVE('',#29508,#29500,#29510,.T.); +#29508 = VERTEX_POINT('',#29509); +#29509 = CARTESIAN_POINT('',(4.895,-11.9,0.)); +#29510 = LINE('',#29511,#29512); +#29511 = CARTESIAN_POINT('',(4.3525,-11.9,0.)); +#29512 = VECTOR('',#29513,1.); +#29513 = DIRECTION('',(-1.,-0.,-0.)); +#29514 = ORIENTED_EDGE('',*,*,#29515,.F.); +#29515 = EDGE_CURVE('',#29516,#29508,#29518,.T.); +#29516 = VERTEX_POINT('',#29517); +#29517 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#29518 = LINE('',#29519,#29520); +#29519 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#29520 = VECTOR('',#29521,1.); +#29521 = DIRECTION('',(0.,1.,0.)); +#29522 = ORIENTED_EDGE('',*,*,#29523,.F.); +#29523 = EDGE_CURVE('',#29524,#29516,#29526,.T.); +#29524 = VERTEX_POINT('',#29525); +#29525 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#29526 = LINE('',#29527,#29528); +#29527 = CARTESIAN_POINT('',(4.895,-6.375,0.)); +#29528 = VECTOR('',#29529,1.); +#29529 = DIRECTION('',(0.,1.,0.)); +#29530 = ORIENTED_EDGE('',*,*,#29531,.F.); +#29531 = EDGE_CURVE('',#29532,#29524,#29534,.T.); +#29532 = VERTEX_POINT('',#29533); +#29533 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#29534 = LINE('',#29535,#29536); +#29535 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29536 = VECTOR('',#29537,1.); +#29537 = DIRECTION('',(-1.,0.,0.)); +#29538 = ORIENTED_EDGE('',*,*,#29539,.F.); +#29539 = EDGE_CURVE('',#29540,#29532,#29542,.T.); +#29540 = VERTEX_POINT('',#29541); +#29541 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#29542 = LINE('',#29543,#29544); +#29543 = CARTESIAN_POINT('',(5.265,-6.15,0.)); +#29544 = VECTOR('',#29545,1.); +#29545 = DIRECTION('',(0.,-1.,0.)); +#29546 = ORIENTED_EDGE('',*,*,#29547,.T.); +#29547 = EDGE_CURVE('',#29540,#29548,#29550,.T.); +#29548 = VERTEX_POINT('',#29549); +#29549 = CARTESIAN_POINT('',(5.265,-11.9,0.)); +#29550 = LINE('',#29551,#29552); +#29551 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#29552 = VECTOR('',#29553,1.); +#29553 = DIRECTION('',(0.,1.,0.)); +#29554 = ORIENTED_EDGE('',*,*,#29555,.F.); +#29555 = EDGE_CURVE('',#29556,#29548,#29558,.T.); +#29556 = VERTEX_POINT('',#29557); +#29557 = CARTESIAN_POINT('',(6.165,-11.9,0.)); +#29558 = LINE('',#29559,#29560); +#29559 = CARTESIAN_POINT('',(5.6225,-11.9,0.)); +#29560 = VECTOR('',#29561,1.); +#29561 = DIRECTION('',(-1.,-0.,-0.)); +#29562 = ORIENTED_EDGE('',*,*,#29563,.F.); +#29563 = EDGE_CURVE('',#29564,#29556,#29566,.T.); +#29564 = VERTEX_POINT('',#29565); +#29565 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#29566 = LINE('',#29567,#29568); +#29567 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#29568 = VECTOR('',#29569,1.); +#29569 = DIRECTION('',(0.,1.,0.)); +#29570 = ORIENTED_EDGE('',*,*,#29571,.F.); +#29571 = EDGE_CURVE('',#29572,#29564,#29574,.T.); +#29572 = VERTEX_POINT('',#29573); +#29573 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#29574 = LINE('',#29575,#29576); +#29575 = CARTESIAN_POINT('',(6.165,-6.375,0.)); +#29576 = VECTOR('',#29577,1.); +#29577 = DIRECTION('',(0.,1.,0.)); +#29578 = ORIENTED_EDGE('',*,*,#29579,.F.); +#29579 = EDGE_CURVE('',#29580,#29572,#29582,.T.); +#29580 = VERTEX_POINT('',#29581); +#29581 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29582 = LINE('',#29583,#29584); +#29583 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#29584 = VECTOR('',#29585,1.); +#29585 = DIRECTION('',(-1.,0.,0.)); +#29586 = ORIENTED_EDGE('',*,*,#29587,.F.); +#29587 = EDGE_CURVE('',#29588,#29580,#29590,.T.); +#29588 = VERTEX_POINT('',#29589); +#29589 = CARTESIAN_POINT('',(9.,-11.7,0.)); +#29590 = LINE('',#29591,#29592); +#29591 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29592 = VECTOR('',#29593,1.); +#29593 = DIRECTION('',(0.,-1.,0.)); +#29594 = ORIENTED_EDGE('',*,*,#29595,.F.); +#29595 = EDGE_CURVE('',#29596,#29588,#29598,.T.); +#29596 = VERTEX_POINT('',#29597); +#29597 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#29598 = LINE('',#29599,#29600); +#29599 = CARTESIAN_POINT('',(4.275,-11.7,0.)); +#29600 = VECTOR('',#29601,1.); +#29601 = DIRECTION('',(1.,0.,0.)); +#29602 = ORIENTED_EDGE('',*,*,#29603,.T.); +#29603 = EDGE_CURVE('',#29596,#29604,#29606,.T.); +#29604 = VERTEX_POINT('',#29605); +#29605 = CARTESIAN_POINT('',(8.15,-11.7,0.)); +#29606 = LINE('',#29607,#29608); +#29607 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#29608 = VECTOR('',#29609,1.); +#29609 = DIRECTION('',(-1.,-0.,-0.)); +#29610 = ORIENTED_EDGE('',*,*,#29611,.F.); +#29611 = EDGE_CURVE('',#29612,#29604,#29614,.T.); +#29612 = VERTEX_POINT('',#29613); +#29613 = CARTESIAN_POINT('',(8.15,-10.8,0.)); +#29614 = LINE('',#29615,#29616); +#29615 = CARTESIAN_POINT('',(8.15,-5.4,0.)); +#29616 = VECTOR('',#29617,1.); +#29617 = DIRECTION('',(-0.,-1.,-0.)); +#29618 = ORIENTED_EDGE('',*,*,#29619,.F.); +#29619 = EDGE_CURVE('',#29620,#29612,#29622,.T.); +#29620 = VERTEX_POINT('',#29621); +#29621 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#29622 = LINE('',#29623,#29624); +#29623 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#29624 = VECTOR('',#29625,1.); +#29625 = DIRECTION('',(-1.,-0.,-0.)); +#29626 = ORIENTED_EDGE('',*,*,#29627,.F.); +#29627 = EDGE_CURVE('',#29628,#29620,#29630,.T.); +#29628 = VERTEX_POINT('',#29629); +#29629 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#29630 = LINE('',#29631,#29632); +#29631 = CARTESIAN_POINT('',(4.5,-10.8,0.)); +#29632 = VECTOR('',#29633,1.); +#29633 = DIRECTION('',(-1.,0.,0.)); +#29634 = ORIENTED_EDGE('',*,*,#29635,.F.); +#29635 = EDGE_CURVE('',#29636,#29628,#29638,.T.); +#29636 = VERTEX_POINT('',#29637); +#29637 = CARTESIAN_POINT('',(9.,-10.43,0.)); +#29638 = LINE('',#29639,#29640); +#29639 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29640 = VECTOR('',#29641,1.); +#29641 = DIRECTION('',(0.,-1.,0.)); +#29642 = ORIENTED_EDGE('',*,*,#29643,.F.); +#29643 = EDGE_CURVE('',#29644,#29636,#29646,.T.); +#29644 = VERTEX_POINT('',#29645); +#29645 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#29646 = LINE('',#29647,#29648); +#29647 = CARTESIAN_POINT('',(4.275,-10.43,0.)); +#29648 = VECTOR('',#29649,1.); +#29649 = DIRECTION('',(1.,0.,0.)); +#29650 = ORIENTED_EDGE('',*,*,#29651,.T.); +#29651 = EDGE_CURVE('',#29644,#29652,#29654,.T.); +#29652 = VERTEX_POINT('',#29653); +#29653 = CARTESIAN_POINT('',(8.15,-10.43,0.)); +#29654 = LINE('',#29655,#29656); +#29655 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#29656 = VECTOR('',#29657,1.); +#29657 = DIRECTION('',(-1.,-0.,-0.)); +#29658 = ORIENTED_EDGE('',*,*,#29659,.F.); +#29659 = EDGE_CURVE('',#29660,#29652,#29662,.T.); +#29660 = VERTEX_POINT('',#29661); +#29661 = CARTESIAN_POINT('',(8.15,-9.53,0.)); +#29662 = LINE('',#29663,#29664); +#29663 = CARTESIAN_POINT('',(8.15,-4.13,0.)); +#29664 = VECTOR('',#29665,1.); +#29665 = DIRECTION('',(-0.,-1.,-0.)); +#29666 = ORIENTED_EDGE('',*,*,#29667,.F.); +#29667 = EDGE_CURVE('',#29668,#29660,#29670,.T.); +#29668 = VERTEX_POINT('',#29669); +#29669 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#29670 = LINE('',#29671,#29672); +#29671 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#29672 = VECTOR('',#29673,1.); +#29673 = DIRECTION('',(-1.,-0.,-0.)); +#29674 = ORIENTED_EDGE('',*,*,#29675,.F.); +#29675 = EDGE_CURVE('',#29676,#29668,#29678,.T.); +#29676 = VERTEX_POINT('',#29677); +#29677 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#29678 = LINE('',#29679,#29680); +#29679 = CARTESIAN_POINT('',(4.5,-9.53,0.)); +#29680 = VECTOR('',#29681,1.); +#29681 = DIRECTION('',(-1.,0.,0.)); +#29682 = ORIENTED_EDGE('',*,*,#29683,.F.); +#29683 = EDGE_CURVE('',#29684,#29676,#29686,.T.); +#29684 = VERTEX_POINT('',#29685); +#29685 = CARTESIAN_POINT('',(9.,-9.16,0.)); +#29686 = LINE('',#29687,#29688); +#29687 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29688 = VECTOR('',#29689,1.); +#29689 = DIRECTION('',(0.,-1.,0.)); +#29690 = ORIENTED_EDGE('',*,*,#29691,.F.); +#29691 = EDGE_CURVE('',#29692,#29684,#29694,.T.); +#29692 = VERTEX_POINT('',#29693); +#29693 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#29694 = LINE('',#29695,#29696); +#29695 = CARTESIAN_POINT('',(4.275,-9.16,0.)); +#29696 = VECTOR('',#29697,1.); +#29697 = DIRECTION('',(1.,0.,0.)); +#29698 = ORIENTED_EDGE('',*,*,#29699,.T.); +#29699 = EDGE_CURVE('',#29692,#29700,#29702,.T.); +#29700 = VERTEX_POINT('',#29701); +#29701 = CARTESIAN_POINT('',(8.15,-9.16,0.)); +#29702 = LINE('',#29703,#29704); +#29703 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#29704 = VECTOR('',#29705,1.); +#29705 = DIRECTION('',(-1.,-0.,-0.)); +#29706 = ORIENTED_EDGE('',*,*,#29707,.F.); +#29707 = EDGE_CURVE('',#29708,#29700,#29710,.T.); +#29708 = VERTEX_POINT('',#29709); +#29709 = CARTESIAN_POINT('',(8.15,-8.26,0.)); +#29710 = LINE('',#29711,#29712); +#29711 = CARTESIAN_POINT('',(8.15,-2.86,0.)); +#29712 = VECTOR('',#29713,1.); +#29713 = DIRECTION('',(-0.,-1.,-0.)); +#29714 = ORIENTED_EDGE('',*,*,#29715,.F.); +#29715 = EDGE_CURVE('',#29716,#29708,#29718,.T.); +#29716 = VERTEX_POINT('',#29717); +#29717 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#29718 = LINE('',#29719,#29720); +#29719 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#29720 = VECTOR('',#29721,1.); +#29721 = DIRECTION('',(-1.,-0.,-0.)); +#29722 = ORIENTED_EDGE('',*,*,#29723,.F.); +#29723 = EDGE_CURVE('',#29724,#29716,#29726,.T.); +#29724 = VERTEX_POINT('',#29725); +#29725 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#29726 = LINE('',#29727,#29728); +#29727 = CARTESIAN_POINT('',(4.5,-8.26,0.)); +#29728 = VECTOR('',#29729,1.); +#29729 = DIRECTION('',(-1.,0.,0.)); +#29730 = ORIENTED_EDGE('',*,*,#29731,.F.); +#29731 = EDGE_CURVE('',#29732,#29724,#29734,.T.); +#29732 = VERTEX_POINT('',#29733); +#29733 = CARTESIAN_POINT('',(9.,-7.89,0.)); +#29734 = LINE('',#29735,#29736); +#29735 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29736 = VECTOR('',#29737,1.); +#29737 = DIRECTION('',(0.,-1.,0.)); +#29738 = ORIENTED_EDGE('',*,*,#29739,.F.); +#29739 = EDGE_CURVE('',#29740,#29732,#29742,.T.); +#29740 = VERTEX_POINT('',#29741); +#29741 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#29742 = LINE('',#29743,#29744); +#29743 = CARTESIAN_POINT('',(4.275,-7.89,0.)); +#29744 = VECTOR('',#29745,1.); +#29745 = DIRECTION('',(1.,0.,0.)); +#29746 = ORIENTED_EDGE('',*,*,#29747,.T.); +#29747 = EDGE_CURVE('',#29740,#29748,#29750,.T.); +#29748 = VERTEX_POINT('',#29749); +#29749 = CARTESIAN_POINT('',(8.15,-7.89,0.)); +#29750 = LINE('',#29751,#29752); +#29751 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#29752 = VECTOR('',#29753,1.); +#29753 = DIRECTION('',(-1.,-0.,-0.)); +#29754 = ORIENTED_EDGE('',*,*,#29755,.F.); +#29755 = EDGE_CURVE('',#29756,#29748,#29758,.T.); +#29756 = VERTEX_POINT('',#29757); +#29757 = CARTESIAN_POINT('',(8.15,-6.99,0.)); +#29758 = LINE('',#29759,#29760); +#29759 = CARTESIAN_POINT('',(8.15,-1.59,0.)); +#29760 = VECTOR('',#29761,1.); +#29761 = DIRECTION('',(-0.,-1.,-0.)); +#29762 = ORIENTED_EDGE('',*,*,#29763,.F.); +#29763 = EDGE_CURVE('',#29764,#29756,#29766,.T.); +#29764 = VERTEX_POINT('',#29765); +#29765 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#29766 = LINE('',#29767,#29768); +#29767 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#29768 = VECTOR('',#29769,1.); +#29769 = DIRECTION('',(-1.,-0.,-0.)); +#29770 = ORIENTED_EDGE('',*,*,#29771,.F.); +#29771 = EDGE_CURVE('',#29772,#29764,#29774,.T.); +#29772 = VERTEX_POINT('',#29773); +#29773 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#29774 = LINE('',#29775,#29776); +#29775 = CARTESIAN_POINT('',(4.5,-6.99,0.)); +#29776 = VECTOR('',#29777,1.); +#29777 = DIRECTION('',(-1.,0.,0.)); +#29778 = ORIENTED_EDGE('',*,*,#29779,.F.); +#29779 = EDGE_CURVE('',#29780,#29772,#29782,.T.); +#29780 = VERTEX_POINT('',#29781); +#29781 = CARTESIAN_POINT('',(9.,-6.62,0.)); +#29782 = LINE('',#29783,#29784); +#29783 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29784 = VECTOR('',#29785,1.); +#29785 = DIRECTION('',(0.,-1.,0.)); +#29786 = ORIENTED_EDGE('',*,*,#29787,.F.); +#29787 = EDGE_CURVE('',#29788,#29780,#29790,.T.); +#29788 = VERTEX_POINT('',#29789); +#29789 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#29790 = LINE('',#29791,#29792); +#29791 = CARTESIAN_POINT('',(4.275,-6.62,0.)); +#29792 = VECTOR('',#29793,1.); +#29793 = DIRECTION('',(1.,0.,0.)); +#29794 = ORIENTED_EDGE('',*,*,#29795,.T.); +#29795 = EDGE_CURVE('',#29788,#29796,#29798,.T.); +#29796 = VERTEX_POINT('',#29797); +#29797 = CARTESIAN_POINT('',(8.15,-6.62,0.)); +#29798 = LINE('',#29799,#29800); +#29799 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#29800 = VECTOR('',#29801,1.); +#29801 = DIRECTION('',(-1.,-0.,-0.)); +#29802 = ORIENTED_EDGE('',*,*,#29803,.F.); +#29803 = EDGE_CURVE('',#29804,#29796,#29806,.T.); +#29804 = VERTEX_POINT('',#29805); +#29805 = CARTESIAN_POINT('',(8.15,-5.72,0.)); +#29806 = LINE('',#29807,#29808); +#29807 = CARTESIAN_POINT('',(8.15,-0.32,0.)); +#29808 = VECTOR('',#29809,1.); +#29809 = DIRECTION('',(-0.,-1.,-0.)); +#29810 = ORIENTED_EDGE('',*,*,#29811,.F.); +#29811 = EDGE_CURVE('',#29812,#29804,#29814,.T.); +#29812 = VERTEX_POINT('',#29813); +#29813 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#29814 = LINE('',#29815,#29816); +#29815 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#29816 = VECTOR('',#29817,1.); +#29817 = DIRECTION('',(-1.,-0.,-0.)); +#29818 = ORIENTED_EDGE('',*,*,#29819,.F.); +#29819 = EDGE_CURVE('',#29820,#29812,#29822,.T.); +#29820 = VERTEX_POINT('',#29821); +#29821 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#29822 = LINE('',#29823,#29824); +#29823 = CARTESIAN_POINT('',(4.5,-5.72,0.)); +#29824 = VECTOR('',#29825,1.); +#29825 = DIRECTION('',(-1.,0.,0.)); +#29826 = ORIENTED_EDGE('',*,*,#29827,.F.); +#29827 = EDGE_CURVE('',#29828,#29820,#29830,.T.); +#29828 = VERTEX_POINT('',#29829); +#29829 = CARTESIAN_POINT('',(9.,-5.35,0.)); +#29830 = LINE('',#29831,#29832); +#29831 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29832 = VECTOR('',#29833,1.); +#29833 = DIRECTION('',(0.,-1.,0.)); +#29834 = ORIENTED_EDGE('',*,*,#29835,.F.); +#29835 = EDGE_CURVE('',#29836,#29828,#29838,.T.); +#29836 = VERTEX_POINT('',#29837); +#29837 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#29838 = LINE('',#29839,#29840); +#29839 = CARTESIAN_POINT('',(4.275,-5.35,0.)); +#29840 = VECTOR('',#29841,1.); +#29841 = DIRECTION('',(1.,0.,0.)); +#29842 = ORIENTED_EDGE('',*,*,#29843,.T.); +#29843 = EDGE_CURVE('',#29836,#29844,#29846,.T.); +#29844 = VERTEX_POINT('',#29845); +#29845 = CARTESIAN_POINT('',(8.15,-5.35,0.)); +#29846 = LINE('',#29847,#29848); +#29847 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#29848 = VECTOR('',#29849,1.); +#29849 = DIRECTION('',(-1.,-0.,-0.)); +#29850 = ORIENTED_EDGE('',*,*,#29851,.F.); +#29851 = EDGE_CURVE('',#29852,#29844,#29854,.T.); +#29852 = VERTEX_POINT('',#29853); +#29853 = CARTESIAN_POINT('',(8.15,-4.45,0.)); +#29854 = LINE('',#29855,#29856); +#29855 = CARTESIAN_POINT('',(8.15,0.95,0.)); +#29856 = VECTOR('',#29857,1.); +#29857 = DIRECTION('',(-0.,-1.,-0.)); +#29858 = ORIENTED_EDGE('',*,*,#29859,.F.); +#29859 = EDGE_CURVE('',#29860,#29852,#29862,.T.); +#29860 = VERTEX_POINT('',#29861); +#29861 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#29862 = LINE('',#29863,#29864); +#29863 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#29864 = VECTOR('',#29865,1.); +#29865 = DIRECTION('',(-1.,-0.,-0.)); +#29866 = ORIENTED_EDGE('',*,*,#29867,.F.); +#29867 = EDGE_CURVE('',#29868,#29860,#29870,.T.); +#29868 = VERTEX_POINT('',#29869); +#29869 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#29870 = LINE('',#29871,#29872); +#29871 = CARTESIAN_POINT('',(4.5,-4.45,0.)); +#29872 = VECTOR('',#29873,1.); +#29873 = DIRECTION('',(-1.,0.,0.)); +#29874 = ORIENTED_EDGE('',*,*,#29875,.F.); +#29875 = EDGE_CURVE('',#29876,#29868,#29878,.T.); +#29876 = VERTEX_POINT('',#29877); +#29877 = CARTESIAN_POINT('',(9.,-4.08,0.)); +#29878 = LINE('',#29879,#29880); +#29879 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29880 = VECTOR('',#29881,1.); +#29881 = DIRECTION('',(0.,-1.,0.)); +#29882 = ORIENTED_EDGE('',*,*,#29883,.F.); +#29883 = EDGE_CURVE('',#29884,#29876,#29886,.T.); +#29884 = VERTEX_POINT('',#29885); +#29885 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#29886 = LINE('',#29887,#29888); +#29887 = CARTESIAN_POINT('',(4.275,-4.08,0.)); +#29888 = VECTOR('',#29889,1.); +#29889 = DIRECTION('',(1.,0.,0.)); +#29890 = ORIENTED_EDGE('',*,*,#29891,.T.); +#29891 = EDGE_CURVE('',#29884,#29892,#29894,.T.); +#29892 = VERTEX_POINT('',#29893); +#29893 = CARTESIAN_POINT('',(8.15,-4.08,0.)); +#29894 = LINE('',#29895,#29896); +#29895 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#29896 = VECTOR('',#29897,1.); +#29897 = DIRECTION('',(-1.,-0.,-0.)); +#29898 = ORIENTED_EDGE('',*,*,#29899,.F.); +#29899 = EDGE_CURVE('',#29900,#29892,#29902,.T.); +#29900 = VERTEX_POINT('',#29901); +#29901 = CARTESIAN_POINT('',(8.15,-3.18,0.)); +#29902 = LINE('',#29903,#29904); +#29903 = CARTESIAN_POINT('',(8.15,2.22,0.)); +#29904 = VECTOR('',#29905,1.); +#29905 = DIRECTION('',(-0.,-1.,-0.)); +#29906 = ORIENTED_EDGE('',*,*,#29907,.F.); +#29907 = EDGE_CURVE('',#29908,#29900,#29910,.T.); +#29908 = VERTEX_POINT('',#29909); +#29909 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#29910 = LINE('',#29911,#29912); +#29911 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#29912 = VECTOR('',#29913,1.); +#29913 = DIRECTION('',(-1.,-0.,-0.)); +#29914 = ORIENTED_EDGE('',*,*,#29915,.F.); +#29915 = EDGE_CURVE('',#29916,#29908,#29918,.T.); +#29916 = VERTEX_POINT('',#29917); +#29917 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#29918 = LINE('',#29919,#29920); +#29919 = CARTESIAN_POINT('',(4.5,-3.18,0.)); +#29920 = VECTOR('',#29921,1.); +#29921 = DIRECTION('',(-1.,0.,0.)); +#29922 = ORIENTED_EDGE('',*,*,#29923,.F.); +#29923 = EDGE_CURVE('',#29924,#29916,#29926,.T.); +#29924 = VERTEX_POINT('',#29925); +#29925 = CARTESIAN_POINT('',(9.,-2.81,0.)); +#29926 = LINE('',#29927,#29928); +#29927 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29928 = VECTOR('',#29929,1.); +#29929 = DIRECTION('',(0.,-1.,0.)); +#29930 = ORIENTED_EDGE('',*,*,#29931,.F.); +#29931 = EDGE_CURVE('',#29932,#29924,#29934,.T.); +#29932 = VERTEX_POINT('',#29933); +#29933 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#29934 = LINE('',#29935,#29936); +#29935 = CARTESIAN_POINT('',(4.275,-2.81,0.)); +#29936 = VECTOR('',#29937,1.); +#29937 = DIRECTION('',(1.,0.,0.)); +#29938 = ORIENTED_EDGE('',*,*,#29939,.T.); +#29939 = EDGE_CURVE('',#29932,#29940,#29942,.T.); +#29940 = VERTEX_POINT('',#29941); +#29941 = CARTESIAN_POINT('',(8.15,-2.81,0.)); +#29942 = LINE('',#29943,#29944); +#29943 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#29944 = VECTOR('',#29945,1.); +#29945 = DIRECTION('',(-1.,-0.,-0.)); +#29946 = ORIENTED_EDGE('',*,*,#29947,.F.); +#29947 = EDGE_CURVE('',#29948,#29940,#29950,.T.); +#29948 = VERTEX_POINT('',#29949); +#29949 = CARTESIAN_POINT('',(8.15,-1.91,0.)); +#29950 = LINE('',#29951,#29952); +#29951 = CARTESIAN_POINT('',(8.15,3.49,0.)); +#29952 = VECTOR('',#29953,1.); +#29953 = DIRECTION('',(-0.,-1.,-0.)); +#29954 = ORIENTED_EDGE('',*,*,#29955,.F.); +#29955 = EDGE_CURVE('',#29956,#29948,#29958,.T.); +#29956 = VERTEX_POINT('',#29957); +#29957 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#29958 = LINE('',#29959,#29960); +#29959 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#29960 = VECTOR('',#29961,1.); +#29961 = DIRECTION('',(-1.,-0.,-0.)); +#29962 = ORIENTED_EDGE('',*,*,#29963,.F.); +#29963 = EDGE_CURVE('',#29964,#29956,#29966,.T.); +#29964 = VERTEX_POINT('',#29965); +#29965 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#29966 = LINE('',#29967,#29968); +#29967 = CARTESIAN_POINT('',(4.5,-1.91,0.)); +#29968 = VECTOR('',#29969,1.); +#29969 = DIRECTION('',(-1.,0.,0.)); +#29970 = ORIENTED_EDGE('',*,*,#29971,.F.); +#29971 = EDGE_CURVE('',#29972,#29964,#29974,.T.); +#29972 = VERTEX_POINT('',#29973); +#29973 = CARTESIAN_POINT('',(9.,-1.54,0.)); +#29974 = LINE('',#29975,#29976); +#29975 = CARTESIAN_POINT('',(9.,12.75,0.)); +#29976 = VECTOR('',#29977,1.); +#29977 = DIRECTION('',(0.,-1.,0.)); +#29978 = ORIENTED_EDGE('',*,*,#29979,.F.); +#29979 = EDGE_CURVE('',#29980,#29972,#29982,.T.); +#29980 = VERTEX_POINT('',#29981); +#29981 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#29982 = LINE('',#29983,#29984); +#29983 = CARTESIAN_POINT('',(4.275,-1.54,0.)); +#29984 = VECTOR('',#29985,1.); +#29985 = DIRECTION('',(1.,0.,0.)); +#29986 = ORIENTED_EDGE('',*,*,#29987,.T.); +#29987 = EDGE_CURVE('',#29980,#29988,#29990,.T.); +#29988 = VERTEX_POINT('',#29989); +#29989 = CARTESIAN_POINT('',(8.15,-1.54,0.)); +#29990 = LINE('',#29991,#29992); +#29991 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#29992 = VECTOR('',#29993,1.); +#29993 = DIRECTION('',(-1.,-0.,-0.)); +#29994 = ORIENTED_EDGE('',*,*,#29995,.F.); +#29995 = EDGE_CURVE('',#29996,#29988,#29998,.T.); +#29996 = VERTEX_POINT('',#29997); +#29997 = CARTESIAN_POINT('',(8.15,-0.64,0.)); +#29998 = LINE('',#29999,#30000); +#29999 = CARTESIAN_POINT('',(8.15,4.76,0.)); +#30000 = VECTOR('',#30001,1.); +#30001 = DIRECTION('',(-0.,-1.,-0.)); +#30002 = ORIENTED_EDGE('',*,*,#30003,.F.); +#30003 = EDGE_CURVE('',#30004,#29996,#30006,.T.); +#30004 = VERTEX_POINT('',#30005); +#30005 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#30006 = LINE('',#30007,#30008); +#30007 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#30008 = VECTOR('',#30009,1.); +#30009 = DIRECTION('',(-1.,-0.,-0.)); +#30010 = ORIENTED_EDGE('',*,*,#30011,.F.); +#30011 = EDGE_CURVE('',#30012,#30004,#30014,.T.); +#30012 = VERTEX_POINT('',#30013); +#30013 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#30014 = LINE('',#30015,#30016); +#30015 = CARTESIAN_POINT('',(4.5,-0.64,0.)); +#30016 = VECTOR('',#30017,1.); +#30017 = DIRECTION('',(-1.,0.,0.)); +#30018 = ORIENTED_EDGE('',*,*,#30019,.F.); +#30019 = EDGE_CURVE('',#30020,#30012,#30022,.T.); +#30020 = VERTEX_POINT('',#30021); +#30021 = CARTESIAN_POINT('',(9.,-0.27,0.)); +#30022 = LINE('',#30023,#30024); +#30023 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30024 = VECTOR('',#30025,1.); +#30025 = DIRECTION('',(0.,-1.,0.)); +#30026 = ORIENTED_EDGE('',*,*,#30027,.F.); +#30027 = EDGE_CURVE('',#30028,#30020,#30030,.T.); +#30028 = VERTEX_POINT('',#30029); +#30029 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#30030 = LINE('',#30031,#30032); +#30031 = CARTESIAN_POINT('',(4.275,-0.27,0.)); +#30032 = VECTOR('',#30033,1.); +#30033 = DIRECTION('',(1.,0.,0.)); +#30034 = ORIENTED_EDGE('',*,*,#30035,.T.); +#30035 = EDGE_CURVE('',#30028,#30036,#30038,.T.); +#30036 = VERTEX_POINT('',#30037); +#30037 = CARTESIAN_POINT('',(8.15,-0.27,0.)); +#30038 = LINE('',#30039,#30040); +#30039 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#30040 = VECTOR('',#30041,1.); +#30041 = DIRECTION('',(-1.,-0.,-0.)); +#30042 = ORIENTED_EDGE('',*,*,#30043,.F.); +#30043 = EDGE_CURVE('',#30044,#30036,#30046,.T.); +#30044 = VERTEX_POINT('',#30045); +#30045 = CARTESIAN_POINT('',(8.15,0.63,0.)); +#30046 = LINE('',#30047,#30048); +#30047 = CARTESIAN_POINT('',(8.15,6.03,0.)); +#30048 = VECTOR('',#30049,1.); +#30049 = DIRECTION('',(-0.,-1.,-0.)); +#30050 = ORIENTED_EDGE('',*,*,#30051,.F.); +#30051 = EDGE_CURVE('',#30052,#30044,#30054,.T.); +#30052 = VERTEX_POINT('',#30053); +#30053 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#30054 = LINE('',#30055,#30056); +#30055 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#30056 = VECTOR('',#30057,1.); +#30057 = DIRECTION('',(-1.,-0.,-0.)); +#30058 = ORIENTED_EDGE('',*,*,#30059,.F.); +#30059 = EDGE_CURVE('',#30060,#30052,#30062,.T.); +#30060 = VERTEX_POINT('',#30061); +#30061 = CARTESIAN_POINT('',(9.,0.63,0.)); +#30062 = LINE('',#30063,#30064); +#30063 = CARTESIAN_POINT('',(4.5,0.63,0.)); +#30064 = VECTOR('',#30065,1.); +#30065 = DIRECTION('',(-1.,0.,0.)); +#30066 = ORIENTED_EDGE('',*,*,#30067,.F.); +#30067 = EDGE_CURVE('',#30068,#30060,#30070,.T.); +#30068 = VERTEX_POINT('',#30069); +#30069 = CARTESIAN_POINT('',(9.,1.,0.)); +#30070 = LINE('',#30071,#30072); +#30071 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30072 = VECTOR('',#30073,1.); +#30073 = DIRECTION('',(0.,-1.,0.)); +#30074 = ORIENTED_EDGE('',*,*,#30075,.F.); +#30075 = EDGE_CURVE('',#30076,#30068,#30078,.T.); +#30076 = VERTEX_POINT('',#30077); +#30077 = CARTESIAN_POINT('',(8.55,1.,0.)); +#30078 = LINE('',#30079,#30080); +#30079 = CARTESIAN_POINT('',(4.275,1.,0.)); +#30080 = VECTOR('',#30081,1.); +#30081 = DIRECTION('',(1.,0.,0.)); +#30082 = ORIENTED_EDGE('',*,*,#30083,.T.); +#30083 = EDGE_CURVE('',#30076,#30084,#30086,.T.); +#30084 = VERTEX_POINT('',#30085); +#30085 = CARTESIAN_POINT('',(8.15,1.,0.)); +#30086 = LINE('',#30087,#30088); +#30087 = CARTESIAN_POINT('',(8.55,1.,0.)); +#30088 = VECTOR('',#30089,1.); +#30089 = DIRECTION('',(-1.,-0.,-0.)); +#30090 = ORIENTED_EDGE('',*,*,#30091,.F.); +#30091 = EDGE_CURVE('',#30092,#30084,#30094,.T.); +#30092 = VERTEX_POINT('',#30093); +#30093 = CARTESIAN_POINT('',(8.15,1.9,0.)); +#30094 = LINE('',#30095,#30096); +#30095 = CARTESIAN_POINT('',(8.15,7.3,0.)); +#30096 = VECTOR('',#30097,1.); +#30097 = DIRECTION('',(-0.,-1.,-0.)); +#30098 = ORIENTED_EDGE('',*,*,#30099,.F.); +#30099 = EDGE_CURVE('',#30100,#30092,#30102,.T.); +#30100 = VERTEX_POINT('',#30101); +#30101 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#30102 = LINE('',#30103,#30104); +#30103 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#30104 = VECTOR('',#30105,1.); +#30105 = DIRECTION('',(-1.,-0.,-0.)); +#30106 = ORIENTED_EDGE('',*,*,#30107,.F.); +#30107 = EDGE_CURVE('',#30108,#30100,#30110,.T.); +#30108 = VERTEX_POINT('',#30109); +#30109 = CARTESIAN_POINT('',(9.,1.9,0.)); +#30110 = LINE('',#30111,#30112); +#30111 = CARTESIAN_POINT('',(4.5,1.9,0.)); +#30112 = VECTOR('',#30113,1.); +#30113 = DIRECTION('',(-1.,0.,0.)); +#30114 = ORIENTED_EDGE('',*,*,#30115,.F.); +#30115 = EDGE_CURVE('',#30116,#30108,#30118,.T.); +#30116 = VERTEX_POINT('',#30117); +#30117 = CARTESIAN_POINT('',(9.,2.27,0.)); +#30118 = LINE('',#30119,#30120); +#30119 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30120 = VECTOR('',#30121,1.); +#30121 = DIRECTION('',(0.,-1.,0.)); +#30122 = ORIENTED_EDGE('',*,*,#30123,.F.); +#30123 = EDGE_CURVE('',#30124,#30116,#30126,.T.); +#30124 = VERTEX_POINT('',#30125); +#30125 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#30126 = LINE('',#30127,#30128); +#30127 = CARTESIAN_POINT('',(4.275,2.27,0.)); +#30128 = VECTOR('',#30129,1.); +#30129 = DIRECTION('',(1.,0.,0.)); +#30130 = ORIENTED_EDGE('',*,*,#30131,.T.); +#30131 = EDGE_CURVE('',#30124,#30132,#30134,.T.); +#30132 = VERTEX_POINT('',#30133); +#30133 = CARTESIAN_POINT('',(8.15,2.27,0.)); +#30134 = LINE('',#30135,#30136); +#30135 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#30136 = VECTOR('',#30137,1.); +#30137 = DIRECTION('',(-1.,-0.,-0.)); +#30138 = ORIENTED_EDGE('',*,*,#30139,.F.); +#30139 = EDGE_CURVE('',#30140,#30132,#30142,.T.); +#30140 = VERTEX_POINT('',#30141); +#30141 = CARTESIAN_POINT('',(8.15,3.17,0.)); +#30142 = LINE('',#30143,#30144); +#30143 = CARTESIAN_POINT('',(8.15,8.57,0.)); +#30144 = VECTOR('',#30145,1.); +#30145 = DIRECTION('',(-0.,-1.,-0.)); +#30146 = ORIENTED_EDGE('',*,*,#30147,.F.); +#30147 = EDGE_CURVE('',#30148,#30140,#30150,.T.); +#30148 = VERTEX_POINT('',#30149); +#30149 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#30150 = LINE('',#30151,#30152); +#30151 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#30152 = VECTOR('',#30153,1.); +#30153 = DIRECTION('',(-1.,-0.,-0.)); +#30154 = ORIENTED_EDGE('',*,*,#30155,.F.); +#30155 = EDGE_CURVE('',#30156,#30148,#30158,.T.); +#30156 = VERTEX_POINT('',#30157); +#30157 = CARTESIAN_POINT('',(9.,3.17,0.)); +#30158 = LINE('',#30159,#30160); +#30159 = CARTESIAN_POINT('',(4.5,3.17,0.)); +#30160 = VECTOR('',#30161,1.); +#30161 = DIRECTION('',(-1.,0.,0.)); +#30162 = ORIENTED_EDGE('',*,*,#30163,.F.); +#30163 = EDGE_CURVE('',#30164,#30156,#30166,.T.); +#30164 = VERTEX_POINT('',#30165); +#30165 = CARTESIAN_POINT('',(9.,3.54,0.)); +#30166 = LINE('',#30167,#30168); +#30167 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30168 = VECTOR('',#30169,1.); +#30169 = DIRECTION('',(0.,-1.,0.)); +#30170 = ORIENTED_EDGE('',*,*,#30171,.F.); +#30171 = EDGE_CURVE('',#30172,#30164,#30174,.T.); +#30172 = VERTEX_POINT('',#30173); +#30173 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#30174 = LINE('',#30175,#30176); +#30175 = CARTESIAN_POINT('',(4.275,3.54,0.)); +#30176 = VECTOR('',#30177,1.); +#30177 = DIRECTION('',(1.,0.,0.)); +#30178 = ORIENTED_EDGE('',*,*,#30179,.T.); +#30179 = EDGE_CURVE('',#30172,#30180,#30182,.T.); +#30180 = VERTEX_POINT('',#30181); +#30181 = CARTESIAN_POINT('',(8.15,3.54,0.)); +#30182 = LINE('',#30183,#30184); +#30183 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#30184 = VECTOR('',#30185,1.); +#30185 = DIRECTION('',(-1.,-0.,-0.)); +#30186 = ORIENTED_EDGE('',*,*,#30187,.F.); +#30187 = EDGE_CURVE('',#30188,#30180,#30190,.T.); +#30188 = VERTEX_POINT('',#30189); +#30189 = CARTESIAN_POINT('',(8.15,4.44,0.)); +#30190 = LINE('',#30191,#30192); +#30191 = CARTESIAN_POINT('',(8.15,9.84,0.)); +#30192 = VECTOR('',#30193,1.); +#30193 = DIRECTION('',(-0.,-1.,-0.)); +#30194 = ORIENTED_EDGE('',*,*,#30195,.F.); +#30195 = EDGE_CURVE('',#30196,#30188,#30198,.T.); +#30196 = VERTEX_POINT('',#30197); +#30197 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#30198 = LINE('',#30199,#30200); +#30199 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#30200 = VECTOR('',#30201,1.); +#30201 = DIRECTION('',(-1.,-0.,-0.)); +#30202 = ORIENTED_EDGE('',*,*,#30203,.F.); +#30203 = EDGE_CURVE('',#30204,#30196,#30206,.T.); +#30204 = VERTEX_POINT('',#30205); +#30205 = CARTESIAN_POINT('',(9.,4.44,0.)); +#30206 = LINE('',#30207,#30208); +#30207 = CARTESIAN_POINT('',(4.5,4.44,0.)); +#30208 = VECTOR('',#30209,1.); +#30209 = DIRECTION('',(-1.,0.,0.)); +#30210 = ORIENTED_EDGE('',*,*,#30211,.F.); +#30211 = EDGE_CURVE('',#30212,#30204,#30214,.T.); +#30212 = VERTEX_POINT('',#30213); +#30213 = CARTESIAN_POINT('',(9.,4.81,0.)); +#30214 = LINE('',#30215,#30216); +#30215 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30216 = VECTOR('',#30217,1.); +#30217 = DIRECTION('',(0.,-1.,0.)); +#30218 = ORIENTED_EDGE('',*,*,#30219,.F.); +#30219 = EDGE_CURVE('',#30220,#30212,#30222,.T.); +#30220 = VERTEX_POINT('',#30221); +#30221 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#30222 = LINE('',#30223,#30224); +#30223 = CARTESIAN_POINT('',(4.275,4.81,0.)); +#30224 = VECTOR('',#30225,1.); +#30225 = DIRECTION('',(1.,0.,0.)); +#30226 = ORIENTED_EDGE('',*,*,#30227,.T.); +#30227 = EDGE_CURVE('',#30220,#30228,#30230,.T.); +#30228 = VERTEX_POINT('',#30229); +#30229 = CARTESIAN_POINT('',(8.15,4.81,0.)); +#30230 = LINE('',#30231,#30232); +#30231 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#30232 = VECTOR('',#30233,1.); +#30233 = DIRECTION('',(-1.,-0.,-0.)); +#30234 = ORIENTED_EDGE('',*,*,#30235,.F.); +#30235 = EDGE_CURVE('',#30236,#30228,#30238,.T.); +#30236 = VERTEX_POINT('',#30237); +#30237 = CARTESIAN_POINT('',(8.15,5.71,0.)); +#30238 = LINE('',#30239,#30240); +#30239 = CARTESIAN_POINT('',(8.15,11.11,0.)); +#30240 = VECTOR('',#30241,1.); +#30241 = DIRECTION('',(-0.,-1.,-0.)); +#30242 = ORIENTED_EDGE('',*,*,#30243,.F.); +#30243 = EDGE_CURVE('',#30244,#30236,#30246,.T.); +#30244 = VERTEX_POINT('',#30245); +#30245 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#30246 = LINE('',#30247,#30248); +#30247 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#30248 = VECTOR('',#30249,1.); +#30249 = DIRECTION('',(-1.,-0.,-0.)); +#30250 = ORIENTED_EDGE('',*,*,#30251,.F.); +#30251 = EDGE_CURVE('',#28379,#30244,#30252,.T.); +#30252 = LINE('',#30253,#30254); +#30253 = CARTESIAN_POINT('',(4.5,5.71,0.)); +#30254 = VECTOR('',#30255,1.); +#30255 = DIRECTION('',(-1.,0.,0.)); +#30256 = ORIENTED_EDGE('',*,*,#28378,.F.); +#30257 = FACE_BOUND('',#30258,.F.); +#30258 = EDGE_LOOP('',(#30259,#30269,#30277,#30285)); +#30259 = ORIENTED_EDGE('',*,*,#30260,.T.); +#30260 = EDGE_CURVE('',#30261,#30263,#30265,.T.); +#30261 = VERTEX_POINT('',#30262); +#30262 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#30263 = VERTEX_POINT('',#30264); +#30264 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#30265 = LINE('',#30266,#30267); +#30266 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#30267 = VECTOR('',#30268,1.); +#30268 = DIRECTION('',(1.,0.,0.)); +#30269 = ORIENTED_EDGE('',*,*,#30270,.T.); +#30270 = EDGE_CURVE('',#30263,#30271,#30273,.T.); +#30271 = VERTEX_POINT('',#30272); +#30272 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#30273 = LINE('',#30274,#30275); +#30274 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#30275 = VECTOR('',#30276,1.); +#30276 = DIRECTION('',(0.,-1.,0.)); +#30277 = ORIENTED_EDGE('',*,*,#30278,.T.); +#30278 = EDGE_CURVE('',#30271,#30279,#30281,.T.); +#30279 = VERTEX_POINT('',#30280); +#30280 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#30281 = LINE('',#30282,#30283); +#30282 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#30283 = VECTOR('',#30284,1.); +#30284 = DIRECTION('',(-1.,0.,0.)); +#30285 = ORIENTED_EDGE('',*,*,#30286,.T.); +#30286 = EDGE_CURVE('',#30279,#30261,#30287,.T.); +#30287 = LINE('',#30288,#30289); +#30288 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#30289 = VECTOR('',#30290,1.); +#30290 = DIRECTION('',(0.,1.,0.)); +#30291 = FACE_BOUND('',#30292,.F.); +#30292 = EDGE_LOOP('',(#30293,#30303,#30311,#30319)); +#30293 = ORIENTED_EDGE('',*,*,#30294,.T.); +#30294 = EDGE_CURVE('',#30295,#30297,#30299,.T.); +#30295 = VERTEX_POINT('',#30296); +#30296 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#30297 = VERTEX_POINT('',#30298); +#30298 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#30299 = LINE('',#30300,#30301); +#30300 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#30301 = VECTOR('',#30302,1.); +#30302 = DIRECTION('',(1.,0.,0.)); +#30303 = ORIENTED_EDGE('',*,*,#30304,.T.); +#30304 = EDGE_CURVE('',#30297,#30305,#30307,.T.); +#30305 = VERTEX_POINT('',#30306); +#30306 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#30307 = LINE('',#30308,#30309); +#30308 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#30309 = VECTOR('',#30310,1.); +#30310 = DIRECTION('',(0.,-1.,0.)); +#30311 = ORIENTED_EDGE('',*,*,#30312,.T.); +#30312 = EDGE_CURVE('',#30305,#30313,#30315,.T.); +#30313 = VERTEX_POINT('',#30314); +#30314 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#30315 = LINE('',#30316,#30317); +#30316 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#30317 = VECTOR('',#30318,1.); +#30318 = DIRECTION('',(-1.,0.,0.)); +#30319 = ORIENTED_EDGE('',*,*,#30320,.T.); +#30320 = EDGE_CURVE('',#30313,#30295,#30321,.T.); +#30321 = LINE('',#30322,#30323); +#30322 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#30323 = VECTOR('',#30324,1.); +#30324 = DIRECTION('',(0.,1.,0.)); +#30325 = FACE_BOUND('',#30326,.F.); +#30326 = EDGE_LOOP('',(#30327,#30337,#30345,#30353)); +#30327 = ORIENTED_EDGE('',*,*,#30328,.T.); +#30328 = EDGE_CURVE('',#30329,#30331,#30333,.T.); +#30329 = VERTEX_POINT('',#30330); +#30330 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#30331 = VERTEX_POINT('',#30332); +#30332 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#30333 = LINE('',#30334,#30335); +#30334 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#30335 = VECTOR('',#30336,1.); +#30336 = DIRECTION('',(1.,0.,0.)); +#30337 = ORIENTED_EDGE('',*,*,#30338,.T.); +#30338 = EDGE_CURVE('',#30331,#30339,#30341,.T.); +#30339 = VERTEX_POINT('',#30340); +#30340 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#30341 = LINE('',#30342,#30343); +#30342 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#30343 = VECTOR('',#30344,1.); +#30344 = DIRECTION('',(0.,-1.,0.)); +#30345 = ORIENTED_EDGE('',*,*,#30346,.T.); +#30346 = EDGE_CURVE('',#30339,#30347,#30349,.T.); +#30347 = VERTEX_POINT('',#30348); +#30348 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#30349 = LINE('',#30350,#30351); +#30350 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#30351 = VECTOR('',#30352,1.); +#30352 = DIRECTION('',(-1.,0.,0.)); +#30353 = ORIENTED_EDGE('',*,*,#30354,.T.); +#30354 = EDGE_CURVE('',#30347,#30329,#30355,.T.); +#30355 = LINE('',#30356,#30357); +#30356 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#30357 = VECTOR('',#30358,1.); +#30358 = DIRECTION('',(0.,1.,0.)); +#30359 = FACE_BOUND('',#30360,.F.); +#30360 = EDGE_LOOP('',(#30361,#30371,#30379,#30387)); +#30361 = ORIENTED_EDGE('',*,*,#30362,.T.); +#30362 = EDGE_CURVE('',#30363,#30365,#30367,.T.); +#30363 = VERTEX_POINT('',#30364); +#30364 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#30365 = VERTEX_POINT('',#30366); +#30366 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#30367 = LINE('',#30368,#30369); +#30368 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#30369 = VECTOR('',#30370,1.); +#30370 = DIRECTION('',(1.,0.,0.)); +#30371 = ORIENTED_EDGE('',*,*,#30372,.T.); +#30372 = EDGE_CURVE('',#30365,#30373,#30375,.T.); +#30373 = VERTEX_POINT('',#30374); +#30374 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#30375 = LINE('',#30376,#30377); +#30376 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#30377 = VECTOR('',#30378,1.); +#30378 = DIRECTION('',(0.,-1.,0.)); +#30379 = ORIENTED_EDGE('',*,*,#30380,.T.); +#30380 = EDGE_CURVE('',#30373,#30381,#30383,.T.); +#30381 = VERTEX_POINT('',#30382); +#30382 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#30383 = LINE('',#30384,#30385); +#30384 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#30385 = VECTOR('',#30386,1.); +#30386 = DIRECTION('',(-1.,0.,0.)); +#30387 = ORIENTED_EDGE('',*,*,#30388,.T.); +#30388 = EDGE_CURVE('',#30381,#30363,#30389,.T.); +#30389 = LINE('',#30390,#30391); +#30390 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#30391 = VECTOR('',#30392,1.); +#30392 = DIRECTION('',(0.,1.,0.)); +#30393 = FACE_BOUND('',#30394,.F.); +#30394 = EDGE_LOOP('',(#30395,#30405,#30413,#30421)); +#30395 = ORIENTED_EDGE('',*,*,#30396,.T.); +#30396 = EDGE_CURVE('',#30397,#30399,#30401,.T.); +#30397 = VERTEX_POINT('',#30398); +#30398 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#30399 = VERTEX_POINT('',#30400); +#30400 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#30401 = LINE('',#30402,#30403); +#30402 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#30403 = VECTOR('',#30404,1.); +#30404 = DIRECTION('',(1.,0.,0.)); +#30405 = ORIENTED_EDGE('',*,*,#30406,.T.); +#30406 = EDGE_CURVE('',#30399,#30407,#30409,.T.); +#30407 = VERTEX_POINT('',#30408); +#30408 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#30409 = LINE('',#30410,#30411); +#30410 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#30411 = VECTOR('',#30412,1.); +#30412 = DIRECTION('',(0.,-1.,0.)); +#30413 = ORIENTED_EDGE('',*,*,#30414,.T.); +#30414 = EDGE_CURVE('',#30407,#30415,#30417,.T.); +#30415 = VERTEX_POINT('',#30416); +#30416 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#30417 = LINE('',#30418,#30419); +#30418 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#30419 = VECTOR('',#30420,1.); +#30420 = DIRECTION('',(-1.,0.,0.)); +#30421 = ORIENTED_EDGE('',*,*,#30422,.T.); +#30422 = EDGE_CURVE('',#30415,#30397,#30423,.T.); +#30423 = LINE('',#30424,#30425); +#30424 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#30425 = VECTOR('',#30426,1.); +#30426 = DIRECTION('',(0.,1.,0.)); +#30427 = FACE_BOUND('',#30428,.F.); +#30428 = EDGE_LOOP('',(#30429,#30439,#30447,#30455)); +#30429 = ORIENTED_EDGE('',*,*,#30430,.T.); +#30430 = EDGE_CURVE('',#30431,#30433,#30435,.T.); +#30431 = VERTEX_POINT('',#30432); +#30432 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#30433 = VERTEX_POINT('',#30434); +#30434 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#30435 = LINE('',#30436,#30437); +#30436 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#30437 = VECTOR('',#30438,1.); +#30438 = DIRECTION('',(1.,0.,0.)); +#30439 = ORIENTED_EDGE('',*,*,#30440,.T.); +#30440 = EDGE_CURVE('',#30433,#30441,#30443,.T.); +#30441 = VERTEX_POINT('',#30442); +#30442 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#30443 = LINE('',#30444,#30445); +#30444 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#30445 = VECTOR('',#30446,1.); +#30446 = DIRECTION('',(0.,-1.,0.)); +#30447 = ORIENTED_EDGE('',*,*,#30448,.T.); +#30448 = EDGE_CURVE('',#30441,#30449,#30451,.T.); +#30449 = VERTEX_POINT('',#30450); +#30450 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#30451 = LINE('',#30452,#30453); +#30452 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#30453 = VECTOR('',#30454,1.); +#30454 = DIRECTION('',(-1.,0.,0.)); +#30455 = ORIENTED_EDGE('',*,*,#30456,.T.); +#30456 = EDGE_CURVE('',#30449,#30431,#30457,.T.); +#30457 = LINE('',#30458,#30459); +#30458 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#30459 = VECTOR('',#30460,1.); +#30460 = DIRECTION('',(0.,1.,0.)); +#30461 = FACE_BOUND('',#30462,.F.); +#30462 = EDGE_LOOP('',(#30463,#30473,#30481,#30489)); +#30463 = ORIENTED_EDGE('',*,*,#30464,.T.); +#30464 = EDGE_CURVE('',#30465,#30467,#30469,.T.); +#30465 = VERTEX_POINT('',#30466); +#30466 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#30467 = VERTEX_POINT('',#30468); +#30468 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#30469 = LINE('',#30470,#30471); +#30470 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#30471 = VECTOR('',#30472,1.); +#30472 = DIRECTION('',(1.,0.,0.)); +#30473 = ORIENTED_EDGE('',*,*,#30474,.T.); +#30474 = EDGE_CURVE('',#30467,#30475,#30477,.T.); +#30475 = VERTEX_POINT('',#30476); +#30476 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#30477 = LINE('',#30478,#30479); +#30478 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#30479 = VECTOR('',#30480,1.); +#30480 = DIRECTION('',(0.,-1.,0.)); +#30481 = ORIENTED_EDGE('',*,*,#30482,.T.); +#30482 = EDGE_CURVE('',#30475,#30483,#30485,.T.); +#30483 = VERTEX_POINT('',#30484); +#30484 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#30485 = LINE('',#30486,#30487); +#30486 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#30487 = VECTOR('',#30488,1.); +#30488 = DIRECTION('',(-1.,0.,0.)); +#30489 = ORIENTED_EDGE('',*,*,#30490,.T.); +#30490 = EDGE_CURVE('',#30483,#30465,#30491,.T.); +#30491 = LINE('',#30492,#30493); +#30492 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#30493 = VECTOR('',#30494,1.); +#30494 = DIRECTION('',(0.,1.,0.)); +#30495 = FACE_BOUND('',#30496,.F.); +#30496 = EDGE_LOOP('',(#30497,#30507,#30515,#30523)); +#30497 = ORIENTED_EDGE('',*,*,#30498,.T.); +#30498 = EDGE_CURVE('',#30499,#30501,#30503,.T.); +#30499 = VERTEX_POINT('',#30500); +#30500 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#30501 = VERTEX_POINT('',#30502); +#30502 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#30503 = LINE('',#30504,#30505); +#30504 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#30505 = VECTOR('',#30506,1.); +#30506 = DIRECTION('',(1.,0.,0.)); +#30507 = ORIENTED_EDGE('',*,*,#30508,.T.); +#30508 = EDGE_CURVE('',#30501,#30509,#30511,.T.); +#30509 = VERTEX_POINT('',#30510); +#30510 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#30511 = LINE('',#30512,#30513); +#30512 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#30513 = VECTOR('',#30514,1.); +#30514 = DIRECTION('',(0.,-1.,0.)); +#30515 = ORIENTED_EDGE('',*,*,#30516,.T.); +#30516 = EDGE_CURVE('',#30509,#30517,#30519,.T.); +#30517 = VERTEX_POINT('',#30518); +#30518 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#30519 = LINE('',#30520,#30521); +#30520 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#30521 = VECTOR('',#30522,1.); +#30522 = DIRECTION('',(-1.,0.,0.)); +#30523 = ORIENTED_EDGE('',*,*,#30524,.T.); +#30524 = EDGE_CURVE('',#30517,#30499,#30525,.T.); +#30525 = LINE('',#30526,#30527); +#30526 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#30527 = VECTOR('',#30528,1.); +#30528 = DIRECTION('',(0.,1.,0.)); +#30529 = FACE_BOUND('',#30530,.F.); +#30530 = EDGE_LOOP('',(#30531,#30541,#30549,#30557)); +#30531 = ORIENTED_EDGE('',*,*,#30532,.T.); +#30532 = EDGE_CURVE('',#30533,#30535,#30537,.T.); +#30533 = VERTEX_POINT('',#30534); +#30534 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#30535 = VERTEX_POINT('',#30536); +#30536 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#30537 = LINE('',#30538,#30539); +#30538 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#30539 = VECTOR('',#30540,1.); +#30540 = DIRECTION('',(1.,0.,0.)); +#30541 = ORIENTED_EDGE('',*,*,#30542,.T.); +#30542 = EDGE_CURVE('',#30535,#30543,#30545,.T.); +#30543 = VERTEX_POINT('',#30544); +#30544 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#30545 = LINE('',#30546,#30547); +#30546 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#30547 = VECTOR('',#30548,1.); +#30548 = DIRECTION('',(0.,-1.,0.)); +#30549 = ORIENTED_EDGE('',*,*,#30550,.T.); +#30550 = EDGE_CURVE('',#30543,#30551,#30553,.T.); +#30551 = VERTEX_POINT('',#30552); +#30552 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#30553 = LINE('',#30554,#30555); +#30554 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#30555 = VECTOR('',#30556,1.); +#30556 = DIRECTION('',(-1.,0.,0.)); +#30557 = ORIENTED_EDGE('',*,*,#30558,.T.); +#30558 = EDGE_CURVE('',#30551,#30533,#30559,.T.); +#30559 = LINE('',#30560,#30561); +#30560 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#30561 = VECTOR('',#30562,1.); +#30562 = DIRECTION('',(0.,1.,0.)); +#30563 = PLANE('',#30564); +#30564 = AXIS2_PLACEMENT_3D('',#30565,#30566,#30567); +#30565 = CARTESIAN_POINT('',(0.,0.,0.)); +#30566 = DIRECTION('',(0.,0.,1.)); +#30567 = DIRECTION('',(1.,0.,-0.)); +#30568 = ADVANCED_FACE('',(#30569,#31796,#31866),#32092,.T.); +#30569 = FACE_BOUND('',#30570,.T.); +#30570 = EDGE_LOOP('',(#30571,#30572,#30573,#30581,#30589,#30597,#30605, + #30613,#30621,#30629,#30637,#30645,#30653,#30661,#30669,#30677, + #30685,#30693,#30701,#30709,#30717,#30725,#30733,#30741,#30749, + #30757,#30765,#30773,#30781,#30789,#30797,#30805,#30813,#30821, + #30829,#30837,#30845,#30853,#30861,#30869,#30877,#30885,#30893, + #30901,#30909,#30917,#30925,#30933,#30941,#30949,#30957,#30965, + #30973,#30981,#30989,#30997,#31005,#31013,#31021,#31029,#31037, + #31045,#31053,#31061,#31069,#31077,#31085,#31093,#31101,#31109, + #31117,#31125,#31133,#31141,#31149,#31157,#31165,#31173,#31181, + #31189,#31197,#31205,#31213,#31221,#31229,#31237,#31245,#31253, + #31261,#31269,#31277,#31285,#31293,#31301,#31309,#31317,#31325, + #31333,#31341,#31349,#31357,#31365,#31373,#31381,#31389,#31397, + #31405,#31413,#31421,#31429,#31437,#31445,#31453,#31461,#31469, + #31477,#31485,#31493,#31501,#31509,#31517,#31525,#31533,#31541, + #31549,#31557,#31565,#31573,#31581,#31589,#31597,#31605,#31613, + #31621,#31629,#31637,#31645,#31653,#31661,#31669,#31677,#31685, + #31693,#31701,#31709,#31717,#31725,#31733,#31741,#31749,#31757, + #31765,#31773,#31781,#31789,#31795)); +#30571 = ORIENTED_EDGE('',*,*,#28309,.F.); +#30572 = ORIENTED_EDGE('',*,*,#28363,.F.); +#30573 = ORIENTED_EDGE('',*,*,#30574,.T.); +#30574 = EDGE_CURVE('',#28356,#30575,#30577,.T.); +#30575 = VERTEX_POINT('',#30576); +#30576 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#30577 = LINE('',#30578,#30579); +#30578 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#30579 = VECTOR('',#30580,1.); +#30580 = DIRECTION('',(1.,0.,0.)); +#30581 = ORIENTED_EDGE('',*,*,#30582,.T.); +#30582 = EDGE_CURVE('',#30575,#30583,#30585,.T.); +#30583 = VERTEX_POINT('',#30584); +#30584 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#30585 = LINE('',#30586,#30587); +#30586 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#30587 = VECTOR('',#30588,1.); +#30588 = DIRECTION('',(0.,-1.,0.)); +#30589 = ORIENTED_EDGE('',*,*,#30590,.T.); +#30590 = EDGE_CURVE('',#30583,#30591,#30593,.T.); +#30591 = VERTEX_POINT('',#30592); +#30592 = CARTESIAN_POINT('',(-9.,4.81,0.8)); +#30593 = LINE('',#30594,#30595); +#30594 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#30595 = VECTOR('',#30596,1.); +#30596 = DIRECTION('',(-1.,0.,0.)); +#30597 = ORIENTED_EDGE('',*,*,#30598,.F.); +#30598 = EDGE_CURVE('',#30599,#30591,#30601,.T.); +#30599 = VERTEX_POINT('',#30600); +#30600 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#30601 = LINE('',#30602,#30603); +#30602 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30603 = VECTOR('',#30604,1.); +#30604 = DIRECTION('',(0.,1.,0.)); +#30605 = ORIENTED_EDGE('',*,*,#30606,.T.); +#30606 = EDGE_CURVE('',#30599,#30607,#30609,.T.); +#30607 = VERTEX_POINT('',#30608); +#30608 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#30609 = LINE('',#30610,#30611); +#30610 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#30611 = VECTOR('',#30612,1.); +#30612 = DIRECTION('',(1.,0.,0.)); +#30613 = ORIENTED_EDGE('',*,*,#30614,.T.); +#30614 = EDGE_CURVE('',#30607,#30615,#30617,.T.); +#30615 = VERTEX_POINT('',#30616); +#30616 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#30617 = LINE('',#30618,#30619); +#30618 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#30619 = VECTOR('',#30620,1.); +#30620 = DIRECTION('',(0.,-1.,0.)); +#30621 = ORIENTED_EDGE('',*,*,#30622,.T.); +#30622 = EDGE_CURVE('',#30615,#30623,#30625,.T.); +#30623 = VERTEX_POINT('',#30624); +#30624 = CARTESIAN_POINT('',(-9.,3.54,0.8)); +#30625 = LINE('',#30626,#30627); +#30626 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#30627 = VECTOR('',#30628,1.); +#30628 = DIRECTION('',(-1.,0.,0.)); +#30629 = ORIENTED_EDGE('',*,*,#30630,.F.); +#30630 = EDGE_CURVE('',#30631,#30623,#30633,.T.); +#30631 = VERTEX_POINT('',#30632); +#30632 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#30633 = LINE('',#30634,#30635); +#30634 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30635 = VECTOR('',#30636,1.); +#30636 = DIRECTION('',(0.,1.,0.)); +#30637 = ORIENTED_EDGE('',*,*,#30638,.T.); +#30638 = EDGE_CURVE('',#30631,#30639,#30641,.T.); +#30639 = VERTEX_POINT('',#30640); +#30640 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#30641 = LINE('',#30642,#30643); +#30642 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#30643 = VECTOR('',#30644,1.); +#30644 = DIRECTION('',(1.,0.,0.)); +#30645 = ORIENTED_EDGE('',*,*,#30646,.T.); +#30646 = EDGE_CURVE('',#30639,#30647,#30649,.T.); +#30647 = VERTEX_POINT('',#30648); +#30648 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#30649 = LINE('',#30650,#30651); +#30650 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#30651 = VECTOR('',#30652,1.); +#30652 = DIRECTION('',(0.,-1.,0.)); +#30653 = ORIENTED_EDGE('',*,*,#30654,.T.); +#30654 = EDGE_CURVE('',#30647,#30655,#30657,.T.); +#30655 = VERTEX_POINT('',#30656); +#30656 = CARTESIAN_POINT('',(-9.,2.27,0.8)); +#30657 = LINE('',#30658,#30659); +#30658 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#30659 = VECTOR('',#30660,1.); +#30660 = DIRECTION('',(-1.,0.,0.)); +#30661 = ORIENTED_EDGE('',*,*,#30662,.F.); +#30662 = EDGE_CURVE('',#30663,#30655,#30665,.T.); +#30663 = VERTEX_POINT('',#30664); +#30664 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#30665 = LINE('',#30666,#30667); +#30666 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30667 = VECTOR('',#30668,1.); +#30668 = DIRECTION('',(0.,1.,0.)); +#30669 = ORIENTED_EDGE('',*,*,#30670,.T.); +#30670 = EDGE_CURVE('',#30663,#30671,#30673,.T.); +#30671 = VERTEX_POINT('',#30672); +#30672 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#30673 = LINE('',#30674,#30675); +#30674 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#30675 = VECTOR('',#30676,1.); +#30676 = DIRECTION('',(1.,0.,0.)); +#30677 = ORIENTED_EDGE('',*,*,#30678,.T.); +#30678 = EDGE_CURVE('',#30671,#30679,#30681,.T.); +#30679 = VERTEX_POINT('',#30680); +#30680 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#30681 = LINE('',#30682,#30683); +#30682 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#30683 = VECTOR('',#30684,1.); +#30684 = DIRECTION('',(0.,-1.,0.)); +#30685 = ORIENTED_EDGE('',*,*,#30686,.T.); +#30686 = EDGE_CURVE('',#30679,#30687,#30689,.T.); +#30687 = VERTEX_POINT('',#30688); +#30688 = CARTESIAN_POINT('',(-9.,1.,0.8)); +#30689 = LINE('',#30690,#30691); +#30690 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#30691 = VECTOR('',#30692,1.); +#30692 = DIRECTION('',(-1.,0.,0.)); +#30693 = ORIENTED_EDGE('',*,*,#30694,.F.); +#30694 = EDGE_CURVE('',#30695,#30687,#30697,.T.); +#30695 = VERTEX_POINT('',#30696); +#30696 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#30697 = LINE('',#30698,#30699); +#30698 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30699 = VECTOR('',#30700,1.); +#30700 = DIRECTION('',(0.,1.,0.)); +#30701 = ORIENTED_EDGE('',*,*,#30702,.T.); +#30702 = EDGE_CURVE('',#30695,#30703,#30705,.T.); +#30703 = VERTEX_POINT('',#30704); +#30704 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#30705 = LINE('',#30706,#30707); +#30706 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#30707 = VECTOR('',#30708,1.); +#30708 = DIRECTION('',(1.,0.,0.)); +#30709 = ORIENTED_EDGE('',*,*,#30710,.T.); +#30710 = EDGE_CURVE('',#30703,#30711,#30713,.T.); +#30711 = VERTEX_POINT('',#30712); +#30712 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#30713 = LINE('',#30714,#30715); +#30714 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#30715 = VECTOR('',#30716,1.); +#30716 = DIRECTION('',(0.,-1.,0.)); +#30717 = ORIENTED_EDGE('',*,*,#30718,.T.); +#30718 = EDGE_CURVE('',#30711,#30719,#30721,.T.); +#30719 = VERTEX_POINT('',#30720); +#30720 = CARTESIAN_POINT('',(-9.,-0.27,0.8)); +#30721 = LINE('',#30722,#30723); +#30722 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#30723 = VECTOR('',#30724,1.); +#30724 = DIRECTION('',(-1.,0.,0.)); +#30725 = ORIENTED_EDGE('',*,*,#30726,.F.); +#30726 = EDGE_CURVE('',#30727,#30719,#30729,.T.); +#30727 = VERTEX_POINT('',#30728); +#30728 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#30729 = LINE('',#30730,#30731); +#30730 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30731 = VECTOR('',#30732,1.); +#30732 = DIRECTION('',(0.,1.,0.)); +#30733 = ORIENTED_EDGE('',*,*,#30734,.T.); +#30734 = EDGE_CURVE('',#30727,#30735,#30737,.T.); +#30735 = VERTEX_POINT('',#30736); +#30736 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#30737 = LINE('',#30738,#30739); +#30738 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#30739 = VECTOR('',#30740,1.); +#30740 = DIRECTION('',(1.,0.,0.)); +#30741 = ORIENTED_EDGE('',*,*,#30742,.T.); +#30742 = EDGE_CURVE('',#30735,#30743,#30745,.T.); +#30743 = VERTEX_POINT('',#30744); +#30744 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#30745 = LINE('',#30746,#30747); +#30746 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#30747 = VECTOR('',#30748,1.); +#30748 = DIRECTION('',(0.,-1.,0.)); +#30749 = ORIENTED_EDGE('',*,*,#30750,.T.); +#30750 = EDGE_CURVE('',#30743,#30751,#30753,.T.); +#30751 = VERTEX_POINT('',#30752); +#30752 = CARTESIAN_POINT('',(-9.,-1.54,0.8)); +#30753 = LINE('',#30754,#30755); +#30754 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#30755 = VECTOR('',#30756,1.); +#30756 = DIRECTION('',(-1.,0.,0.)); +#30757 = ORIENTED_EDGE('',*,*,#30758,.F.); +#30758 = EDGE_CURVE('',#30759,#30751,#30761,.T.); +#30759 = VERTEX_POINT('',#30760); +#30760 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#30761 = LINE('',#30762,#30763); +#30762 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30763 = VECTOR('',#30764,1.); +#30764 = DIRECTION('',(0.,1.,0.)); +#30765 = ORIENTED_EDGE('',*,*,#30766,.T.); +#30766 = EDGE_CURVE('',#30759,#30767,#30769,.T.); +#30767 = VERTEX_POINT('',#30768); +#30768 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#30769 = LINE('',#30770,#30771); +#30770 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#30771 = VECTOR('',#30772,1.); +#30772 = DIRECTION('',(1.,0.,0.)); +#30773 = ORIENTED_EDGE('',*,*,#30774,.T.); +#30774 = EDGE_CURVE('',#30767,#30775,#30777,.T.); +#30775 = VERTEX_POINT('',#30776); +#30776 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#30777 = LINE('',#30778,#30779); +#30778 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#30779 = VECTOR('',#30780,1.); +#30780 = DIRECTION('',(0.,-1.,0.)); +#30781 = ORIENTED_EDGE('',*,*,#30782,.T.); +#30782 = EDGE_CURVE('',#30775,#30783,#30785,.T.); +#30783 = VERTEX_POINT('',#30784); +#30784 = CARTESIAN_POINT('',(-9.,-2.81,0.8)); +#30785 = LINE('',#30786,#30787); +#30786 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#30787 = VECTOR('',#30788,1.); +#30788 = DIRECTION('',(-1.,0.,0.)); +#30789 = ORIENTED_EDGE('',*,*,#30790,.F.); +#30790 = EDGE_CURVE('',#30791,#30783,#30793,.T.); +#30791 = VERTEX_POINT('',#30792); +#30792 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#30793 = LINE('',#30794,#30795); +#30794 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30795 = VECTOR('',#30796,1.); +#30796 = DIRECTION('',(0.,1.,0.)); +#30797 = ORIENTED_EDGE('',*,*,#30798,.T.); +#30798 = EDGE_CURVE('',#30791,#30799,#30801,.T.); +#30799 = VERTEX_POINT('',#30800); +#30800 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#30801 = LINE('',#30802,#30803); +#30802 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#30803 = VECTOR('',#30804,1.); +#30804 = DIRECTION('',(1.,0.,0.)); +#30805 = ORIENTED_EDGE('',*,*,#30806,.T.); +#30806 = EDGE_CURVE('',#30799,#30807,#30809,.T.); +#30807 = VERTEX_POINT('',#30808); +#30808 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#30809 = LINE('',#30810,#30811); +#30810 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#30811 = VECTOR('',#30812,1.); +#30812 = DIRECTION('',(0.,-1.,0.)); +#30813 = ORIENTED_EDGE('',*,*,#30814,.T.); +#30814 = EDGE_CURVE('',#30807,#30815,#30817,.T.); +#30815 = VERTEX_POINT('',#30816); +#30816 = CARTESIAN_POINT('',(-9.,-4.08,0.8)); +#30817 = LINE('',#30818,#30819); +#30818 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#30819 = VECTOR('',#30820,1.); +#30820 = DIRECTION('',(-1.,0.,0.)); +#30821 = ORIENTED_EDGE('',*,*,#30822,.F.); +#30822 = EDGE_CURVE('',#30823,#30815,#30825,.T.); +#30823 = VERTEX_POINT('',#30824); +#30824 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#30825 = LINE('',#30826,#30827); +#30826 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30827 = VECTOR('',#30828,1.); +#30828 = DIRECTION('',(0.,1.,0.)); +#30829 = ORIENTED_EDGE('',*,*,#30830,.T.); +#30830 = EDGE_CURVE('',#30823,#30831,#30833,.T.); +#30831 = VERTEX_POINT('',#30832); +#30832 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#30833 = LINE('',#30834,#30835); +#30834 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#30835 = VECTOR('',#30836,1.); +#30836 = DIRECTION('',(1.,0.,0.)); +#30837 = ORIENTED_EDGE('',*,*,#30838,.T.); +#30838 = EDGE_CURVE('',#30831,#30839,#30841,.T.); +#30839 = VERTEX_POINT('',#30840); +#30840 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#30841 = LINE('',#30842,#30843); +#30842 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#30843 = VECTOR('',#30844,1.); +#30844 = DIRECTION('',(0.,-1.,0.)); +#30845 = ORIENTED_EDGE('',*,*,#30846,.T.); +#30846 = EDGE_CURVE('',#30839,#30847,#30849,.T.); +#30847 = VERTEX_POINT('',#30848); +#30848 = CARTESIAN_POINT('',(-9.,-5.35,0.8)); +#30849 = LINE('',#30850,#30851); +#30850 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#30851 = VECTOR('',#30852,1.); +#30852 = DIRECTION('',(-1.,0.,0.)); +#30853 = ORIENTED_EDGE('',*,*,#30854,.F.); +#30854 = EDGE_CURVE('',#30855,#30847,#30857,.T.); +#30855 = VERTEX_POINT('',#30856); +#30856 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#30857 = LINE('',#30858,#30859); +#30858 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30859 = VECTOR('',#30860,1.); +#30860 = DIRECTION('',(0.,1.,0.)); +#30861 = ORIENTED_EDGE('',*,*,#30862,.T.); +#30862 = EDGE_CURVE('',#30855,#30863,#30865,.T.); +#30863 = VERTEX_POINT('',#30864); +#30864 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#30865 = LINE('',#30866,#30867); +#30866 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#30867 = VECTOR('',#30868,1.); +#30868 = DIRECTION('',(1.,0.,0.)); +#30869 = ORIENTED_EDGE('',*,*,#30870,.T.); +#30870 = EDGE_CURVE('',#30863,#30871,#30873,.T.); +#30871 = VERTEX_POINT('',#30872); +#30872 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#30873 = LINE('',#30874,#30875); +#30874 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#30875 = VECTOR('',#30876,1.); +#30876 = DIRECTION('',(0.,-1.,0.)); +#30877 = ORIENTED_EDGE('',*,*,#30878,.T.); +#30878 = EDGE_CURVE('',#30871,#30879,#30881,.T.); +#30879 = VERTEX_POINT('',#30880); +#30880 = CARTESIAN_POINT('',(-9.,-6.62,0.8)); +#30881 = LINE('',#30882,#30883); +#30882 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#30883 = VECTOR('',#30884,1.); +#30884 = DIRECTION('',(-1.,0.,0.)); +#30885 = ORIENTED_EDGE('',*,*,#30886,.F.); +#30886 = EDGE_CURVE('',#30887,#30879,#30889,.T.); +#30887 = VERTEX_POINT('',#30888); +#30888 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#30889 = LINE('',#30890,#30891); +#30890 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30891 = VECTOR('',#30892,1.); +#30892 = DIRECTION('',(0.,1.,0.)); +#30893 = ORIENTED_EDGE('',*,*,#30894,.T.); +#30894 = EDGE_CURVE('',#30887,#30895,#30897,.T.); +#30895 = VERTEX_POINT('',#30896); +#30896 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#30897 = LINE('',#30898,#30899); +#30898 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#30899 = VECTOR('',#30900,1.); +#30900 = DIRECTION('',(1.,0.,0.)); +#30901 = ORIENTED_EDGE('',*,*,#30902,.T.); +#30902 = EDGE_CURVE('',#30895,#30903,#30905,.T.); +#30903 = VERTEX_POINT('',#30904); +#30904 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#30905 = LINE('',#30906,#30907); +#30906 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#30907 = VECTOR('',#30908,1.); +#30908 = DIRECTION('',(0.,-1.,0.)); +#30909 = ORIENTED_EDGE('',*,*,#30910,.T.); +#30910 = EDGE_CURVE('',#30903,#30911,#30913,.T.); +#30911 = VERTEX_POINT('',#30912); +#30912 = CARTESIAN_POINT('',(-9.,-7.89,0.8)); +#30913 = LINE('',#30914,#30915); +#30914 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#30915 = VECTOR('',#30916,1.); +#30916 = DIRECTION('',(-1.,0.,0.)); +#30917 = ORIENTED_EDGE('',*,*,#30918,.F.); +#30918 = EDGE_CURVE('',#30919,#30911,#30921,.T.); +#30919 = VERTEX_POINT('',#30920); +#30920 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#30921 = LINE('',#30922,#30923); +#30922 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30923 = VECTOR('',#30924,1.); +#30924 = DIRECTION('',(0.,1.,0.)); +#30925 = ORIENTED_EDGE('',*,*,#30926,.T.); +#30926 = EDGE_CURVE('',#30919,#30927,#30929,.T.); +#30927 = VERTEX_POINT('',#30928); +#30928 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#30929 = LINE('',#30930,#30931); +#30930 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#30931 = VECTOR('',#30932,1.); +#30932 = DIRECTION('',(1.,0.,0.)); +#30933 = ORIENTED_EDGE('',*,*,#30934,.T.); +#30934 = EDGE_CURVE('',#30927,#30935,#30937,.T.); +#30935 = VERTEX_POINT('',#30936); +#30936 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#30937 = LINE('',#30938,#30939); +#30938 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#30939 = VECTOR('',#30940,1.); +#30940 = DIRECTION('',(0.,-1.,0.)); +#30941 = ORIENTED_EDGE('',*,*,#30942,.T.); +#30942 = EDGE_CURVE('',#30935,#30943,#30945,.T.); +#30943 = VERTEX_POINT('',#30944); +#30944 = CARTESIAN_POINT('',(-9.,-9.16,0.8)); +#30945 = LINE('',#30946,#30947); +#30946 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#30947 = VECTOR('',#30948,1.); +#30948 = DIRECTION('',(-1.,0.,0.)); +#30949 = ORIENTED_EDGE('',*,*,#30950,.F.); +#30950 = EDGE_CURVE('',#30951,#30943,#30953,.T.); +#30951 = VERTEX_POINT('',#30952); +#30952 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#30953 = LINE('',#30954,#30955); +#30954 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30955 = VECTOR('',#30956,1.); +#30956 = DIRECTION('',(0.,1.,0.)); +#30957 = ORIENTED_EDGE('',*,*,#30958,.T.); +#30958 = EDGE_CURVE('',#30951,#30959,#30961,.T.); +#30959 = VERTEX_POINT('',#30960); +#30960 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#30961 = LINE('',#30962,#30963); +#30962 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#30963 = VECTOR('',#30964,1.); +#30964 = DIRECTION('',(1.,0.,0.)); +#30965 = ORIENTED_EDGE('',*,*,#30966,.T.); +#30966 = EDGE_CURVE('',#30959,#30967,#30969,.T.); +#30967 = VERTEX_POINT('',#30968); +#30968 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#30969 = LINE('',#30970,#30971); +#30970 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#30971 = VECTOR('',#30972,1.); +#30972 = DIRECTION('',(0.,-1.,0.)); +#30973 = ORIENTED_EDGE('',*,*,#30974,.T.); +#30974 = EDGE_CURVE('',#30967,#30975,#30977,.T.); +#30975 = VERTEX_POINT('',#30976); +#30976 = CARTESIAN_POINT('',(-9.,-10.43,0.8)); +#30977 = LINE('',#30978,#30979); +#30978 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#30979 = VECTOR('',#30980,1.); +#30980 = DIRECTION('',(-1.,0.,0.)); +#30981 = ORIENTED_EDGE('',*,*,#30982,.F.); +#30982 = EDGE_CURVE('',#30983,#30975,#30985,.T.); +#30983 = VERTEX_POINT('',#30984); +#30984 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#30985 = LINE('',#30986,#30987); +#30986 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30987 = VECTOR('',#30988,1.); +#30988 = DIRECTION('',(0.,1.,0.)); +#30989 = ORIENTED_EDGE('',*,*,#30990,.T.); +#30990 = EDGE_CURVE('',#30983,#30991,#30993,.T.); +#30991 = VERTEX_POINT('',#30992); +#30992 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#30993 = LINE('',#30994,#30995); +#30994 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#30995 = VECTOR('',#30996,1.); +#30996 = DIRECTION('',(1.,0.,0.)); +#30997 = ORIENTED_EDGE('',*,*,#30998,.T.); +#30998 = EDGE_CURVE('',#30991,#30999,#31001,.T.); +#30999 = VERTEX_POINT('',#31000); +#31000 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#31001 = LINE('',#31002,#31003); +#31002 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#31003 = VECTOR('',#31004,1.); +#31004 = DIRECTION('',(0.,-1.,0.)); +#31005 = ORIENTED_EDGE('',*,*,#31006,.T.); +#31006 = EDGE_CURVE('',#30999,#31007,#31009,.T.); +#31007 = VERTEX_POINT('',#31008); +#31008 = CARTESIAN_POINT('',(-9.,-11.7,0.8)); +#31009 = LINE('',#31010,#31011); +#31010 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#31011 = VECTOR('',#31012,1.); +#31012 = DIRECTION('',(-1.,0.,0.)); +#31013 = ORIENTED_EDGE('',*,*,#31014,.F.); +#31014 = EDGE_CURVE('',#31015,#31007,#31017,.T.); +#31015 = VERTEX_POINT('',#31016); +#31016 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#31017 = LINE('',#31018,#31019); +#31018 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#31019 = VECTOR('',#31020,1.); +#31020 = DIRECTION('',(0.,1.,0.)); +#31021 = ORIENTED_EDGE('',*,*,#31022,.F.); +#31022 = EDGE_CURVE('',#31023,#31015,#31025,.T.); +#31023 = VERTEX_POINT('',#31024); +#31024 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#31025 = LINE('',#31026,#31027); +#31026 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31027 = VECTOR('',#31028,1.); +#31028 = DIRECTION('',(-1.,0.,0.)); +#31029 = ORIENTED_EDGE('',*,*,#31030,.T.); +#31030 = EDGE_CURVE('',#31023,#31031,#31033,.T.); +#31031 = VERTEX_POINT('',#31032); +#31032 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#31033 = LINE('',#31034,#31035); +#31034 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#31035 = VECTOR('',#31036,1.); +#31036 = DIRECTION('',(0.,1.,0.)); +#31037 = ORIENTED_EDGE('',*,*,#31038,.T.); +#31038 = EDGE_CURVE('',#31031,#31039,#31041,.T.); +#31039 = VERTEX_POINT('',#31040); +#31040 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#31041 = LINE('',#31042,#31043); +#31042 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#31043 = VECTOR('',#31044,1.); +#31044 = DIRECTION('',(1.,0.,0.)); +#31045 = ORIENTED_EDGE('',*,*,#31046,.T.); +#31046 = EDGE_CURVE('',#31039,#31047,#31049,.T.); +#31047 = VERTEX_POINT('',#31048); +#31048 = CARTESIAN_POINT('',(-5.265,-12.75,0.8)); +#31049 = LINE('',#31050,#31051); +#31050 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#31051 = VECTOR('',#31052,1.); +#31052 = DIRECTION('',(0.,-1.,0.)); +#31053 = ORIENTED_EDGE('',*,*,#31054,.F.); +#31054 = EDGE_CURVE('',#31055,#31047,#31057,.T.); +#31055 = VERTEX_POINT('',#31056); +#31056 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#31057 = LINE('',#31058,#31059); +#31058 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31059 = VECTOR('',#31060,1.); +#31060 = DIRECTION('',(-1.,0.,0.)); +#31061 = ORIENTED_EDGE('',*,*,#31062,.T.); +#31062 = EDGE_CURVE('',#31055,#31063,#31065,.T.); +#31063 = VERTEX_POINT('',#31064); +#31064 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#31065 = LINE('',#31066,#31067); +#31066 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#31067 = VECTOR('',#31068,1.); +#31068 = DIRECTION('',(0.,1.,0.)); +#31069 = ORIENTED_EDGE('',*,*,#31070,.T.); +#31070 = EDGE_CURVE('',#31063,#31071,#31073,.T.); +#31071 = VERTEX_POINT('',#31072); +#31072 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#31073 = LINE('',#31074,#31075); +#31074 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#31075 = VECTOR('',#31076,1.); +#31076 = DIRECTION('',(1.,0.,0.)); +#31077 = ORIENTED_EDGE('',*,*,#31078,.T.); +#31078 = EDGE_CURVE('',#31071,#31079,#31081,.T.); +#31079 = VERTEX_POINT('',#31080); +#31080 = CARTESIAN_POINT('',(-3.995,-12.75,0.8)); +#31081 = LINE('',#31082,#31083); +#31082 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#31083 = VECTOR('',#31084,1.); +#31084 = DIRECTION('',(0.,-1.,0.)); +#31085 = ORIENTED_EDGE('',*,*,#31086,.F.); +#31086 = EDGE_CURVE('',#31087,#31079,#31089,.T.); +#31087 = VERTEX_POINT('',#31088); +#31088 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#31089 = LINE('',#31090,#31091); +#31090 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31091 = VECTOR('',#31092,1.); +#31092 = DIRECTION('',(-1.,0.,0.)); +#31093 = ORIENTED_EDGE('',*,*,#31094,.T.); +#31094 = EDGE_CURVE('',#31087,#31095,#31097,.T.); +#31095 = VERTEX_POINT('',#31096); +#31096 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#31097 = LINE('',#31098,#31099); +#31098 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#31099 = VECTOR('',#31100,1.); +#31100 = DIRECTION('',(0.,1.,0.)); +#31101 = ORIENTED_EDGE('',*,*,#31102,.T.); +#31102 = EDGE_CURVE('',#31095,#31103,#31105,.T.); +#31103 = VERTEX_POINT('',#31104); +#31104 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#31105 = LINE('',#31106,#31107); +#31106 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#31107 = VECTOR('',#31108,1.); +#31108 = DIRECTION('',(1.,0.,0.)); +#31109 = ORIENTED_EDGE('',*,*,#31110,.T.); +#31110 = EDGE_CURVE('',#31103,#31111,#31113,.T.); +#31111 = VERTEX_POINT('',#31112); +#31112 = CARTESIAN_POINT('',(-2.725,-12.75,0.8)); +#31113 = LINE('',#31114,#31115); +#31114 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#31115 = VECTOR('',#31116,1.); +#31116 = DIRECTION('',(0.,-1.,0.)); +#31117 = ORIENTED_EDGE('',*,*,#31118,.F.); +#31118 = EDGE_CURVE('',#31119,#31111,#31121,.T.); +#31119 = VERTEX_POINT('',#31120); +#31120 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#31121 = LINE('',#31122,#31123); +#31122 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31123 = VECTOR('',#31124,1.); +#31124 = DIRECTION('',(-1.,0.,0.)); +#31125 = ORIENTED_EDGE('',*,*,#31126,.T.); +#31126 = EDGE_CURVE('',#31119,#31127,#31129,.T.); +#31127 = VERTEX_POINT('',#31128); +#31128 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#31129 = LINE('',#31130,#31131); +#31130 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#31131 = VECTOR('',#31132,1.); +#31132 = DIRECTION('',(0.,1.,0.)); +#31133 = ORIENTED_EDGE('',*,*,#31134,.T.); +#31134 = EDGE_CURVE('',#31127,#31135,#31137,.T.); +#31135 = VERTEX_POINT('',#31136); +#31136 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#31137 = LINE('',#31138,#31139); +#31138 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#31139 = VECTOR('',#31140,1.); +#31140 = DIRECTION('',(1.,0.,0.)); +#31141 = ORIENTED_EDGE('',*,*,#31142,.T.); +#31142 = EDGE_CURVE('',#31135,#31143,#31145,.T.); +#31143 = VERTEX_POINT('',#31144); +#31144 = CARTESIAN_POINT('',(-1.455,-12.75,0.8)); +#31145 = LINE('',#31146,#31147); +#31146 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#31147 = VECTOR('',#31148,1.); +#31148 = DIRECTION('',(0.,-1.,0.)); +#31149 = ORIENTED_EDGE('',*,*,#31150,.F.); +#31150 = EDGE_CURVE('',#31151,#31143,#31153,.T.); +#31151 = VERTEX_POINT('',#31152); +#31152 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#31153 = LINE('',#31154,#31155); +#31154 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31155 = VECTOR('',#31156,1.); +#31156 = DIRECTION('',(-1.,0.,0.)); +#31157 = ORIENTED_EDGE('',*,*,#31158,.T.); +#31158 = EDGE_CURVE('',#31151,#31159,#31161,.T.); +#31159 = VERTEX_POINT('',#31160); +#31160 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#31161 = LINE('',#31162,#31163); +#31162 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#31163 = VECTOR('',#31164,1.); +#31164 = DIRECTION('',(0.,1.,0.)); +#31165 = ORIENTED_EDGE('',*,*,#31166,.T.); +#31166 = EDGE_CURVE('',#31159,#31167,#31169,.T.); +#31167 = VERTEX_POINT('',#31168); +#31168 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#31169 = LINE('',#31170,#31171); +#31170 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#31171 = VECTOR('',#31172,1.); +#31172 = DIRECTION('',(1.,0.,0.)); +#31173 = ORIENTED_EDGE('',*,*,#31174,.T.); +#31174 = EDGE_CURVE('',#31167,#31175,#31177,.T.); +#31175 = VERTEX_POINT('',#31176); +#31176 = CARTESIAN_POINT('',(-0.185,-12.75,0.8)); +#31177 = LINE('',#31178,#31179); +#31178 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#31179 = VECTOR('',#31180,1.); +#31180 = DIRECTION('',(0.,-1.,0.)); +#31181 = ORIENTED_EDGE('',*,*,#31182,.F.); +#31182 = EDGE_CURVE('',#31183,#31175,#31185,.T.); +#31183 = VERTEX_POINT('',#31184); +#31184 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#31185 = LINE('',#31186,#31187); +#31186 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31187 = VECTOR('',#31188,1.); +#31188 = DIRECTION('',(-1.,0.,0.)); +#31189 = ORIENTED_EDGE('',*,*,#31190,.F.); +#31190 = EDGE_CURVE('',#31191,#31183,#31193,.T.); +#31191 = VERTEX_POINT('',#31192); +#31192 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#31193 = LINE('',#31194,#31195); +#31194 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#31195 = VECTOR('',#31196,1.); +#31196 = DIRECTION('',(-0.,-1.,-0.)); +#31197 = ORIENTED_EDGE('',*,*,#31198,.F.); +#31198 = EDGE_CURVE('',#31199,#31191,#31201,.T.); +#31199 = VERTEX_POINT('',#31200); +#31200 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#31201 = LINE('',#31202,#31203); +#31202 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#31203 = VECTOR('',#31204,1.); +#31204 = DIRECTION('',(-1.,-0.,-0.)); +#31205 = ORIENTED_EDGE('',*,*,#31206,.F.); +#31206 = EDGE_CURVE('',#31207,#31199,#31209,.T.); +#31207 = VERTEX_POINT('',#31208); +#31208 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#31209 = LINE('',#31210,#31211); +#31210 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#31211 = VECTOR('',#31212,1.); +#31212 = DIRECTION('',(0.,1.,0.)); +#31213 = ORIENTED_EDGE('',*,*,#31214,.F.); +#31214 = EDGE_CURVE('',#31215,#31207,#31217,.T.); +#31215 = VERTEX_POINT('',#31216); +#31216 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#31217 = LINE('',#31218,#31219); +#31218 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31219 = VECTOR('',#31220,1.); +#31220 = DIRECTION('',(-1.,0.,0.)); +#31221 = ORIENTED_EDGE('',*,*,#31222,.F.); +#31222 = EDGE_CURVE('',#31223,#31215,#31225,.T.); +#31223 = VERTEX_POINT('',#31224); +#31224 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#31225 = LINE('',#31226,#31227); +#31226 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#31227 = VECTOR('',#31228,1.); +#31228 = DIRECTION('',(-0.,-1.,-0.)); +#31229 = ORIENTED_EDGE('',*,*,#31230,.F.); +#31230 = EDGE_CURVE('',#31231,#31223,#31233,.T.); +#31231 = VERTEX_POINT('',#31232); +#31232 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#31233 = LINE('',#31234,#31235); +#31234 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#31235 = VECTOR('',#31236,1.); +#31236 = DIRECTION('',(-1.,-0.,-0.)); +#31237 = ORIENTED_EDGE('',*,*,#31238,.F.); +#31238 = EDGE_CURVE('',#31239,#31231,#31241,.T.); +#31239 = VERTEX_POINT('',#31240); +#31240 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#31241 = LINE('',#31242,#31243); +#31242 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#31243 = VECTOR('',#31244,1.); +#31244 = DIRECTION('',(0.,1.,0.)); +#31245 = ORIENTED_EDGE('',*,*,#31246,.F.); +#31246 = EDGE_CURVE('',#31247,#31239,#31249,.T.); +#31247 = VERTEX_POINT('',#31248); +#31248 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#31249 = LINE('',#31250,#31251); +#31250 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31251 = VECTOR('',#31252,1.); +#31252 = DIRECTION('',(-1.,0.,0.)); +#31253 = ORIENTED_EDGE('',*,*,#31254,.F.); +#31254 = EDGE_CURVE('',#31255,#31247,#31257,.T.); +#31255 = VERTEX_POINT('',#31256); +#31256 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#31257 = LINE('',#31258,#31259); +#31258 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#31259 = VECTOR('',#31260,1.); +#31260 = DIRECTION('',(-0.,-1.,-0.)); +#31261 = ORIENTED_EDGE('',*,*,#31262,.F.); +#31262 = EDGE_CURVE('',#31263,#31255,#31265,.T.); +#31263 = VERTEX_POINT('',#31264); +#31264 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#31265 = LINE('',#31266,#31267); +#31266 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#31267 = VECTOR('',#31268,1.); +#31268 = DIRECTION('',(-1.,-0.,-0.)); +#31269 = ORIENTED_EDGE('',*,*,#31270,.F.); +#31270 = EDGE_CURVE('',#31271,#31263,#31273,.T.); +#31271 = VERTEX_POINT('',#31272); +#31272 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#31273 = LINE('',#31274,#31275); +#31274 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#31275 = VECTOR('',#31276,1.); +#31276 = DIRECTION('',(0.,1.,0.)); +#31277 = ORIENTED_EDGE('',*,*,#31278,.F.); +#31278 = EDGE_CURVE('',#31279,#31271,#31281,.T.); +#31279 = VERTEX_POINT('',#31280); +#31280 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#31281 = LINE('',#31282,#31283); +#31282 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31283 = VECTOR('',#31284,1.); +#31284 = DIRECTION('',(-1.,0.,0.)); +#31285 = ORIENTED_EDGE('',*,*,#31286,.F.); +#31286 = EDGE_CURVE('',#31287,#31279,#31289,.T.); +#31287 = VERTEX_POINT('',#31288); +#31288 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#31289 = LINE('',#31290,#31291); +#31290 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#31291 = VECTOR('',#31292,1.); +#31292 = DIRECTION('',(-0.,-1.,-0.)); +#31293 = ORIENTED_EDGE('',*,*,#31294,.F.); +#31294 = EDGE_CURVE('',#31295,#31287,#31297,.T.); +#31295 = VERTEX_POINT('',#31296); +#31296 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#31297 = LINE('',#31298,#31299); +#31298 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#31299 = VECTOR('',#31300,1.); +#31300 = DIRECTION('',(-1.,-0.,-0.)); +#31301 = ORIENTED_EDGE('',*,*,#31302,.F.); +#31302 = EDGE_CURVE('',#31303,#31295,#31305,.T.); +#31303 = VERTEX_POINT('',#31304); +#31304 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#31305 = LINE('',#31306,#31307); +#31306 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#31307 = VECTOR('',#31308,1.); +#31308 = DIRECTION('',(0.,1.,0.)); +#31309 = ORIENTED_EDGE('',*,*,#31310,.F.); +#31310 = EDGE_CURVE('',#31311,#31303,#31313,.T.); +#31311 = VERTEX_POINT('',#31312); +#31312 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#31313 = LINE('',#31314,#31315); +#31314 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31315 = VECTOR('',#31316,1.); +#31316 = DIRECTION('',(-1.,0.,0.)); +#31317 = ORIENTED_EDGE('',*,*,#31318,.F.); +#31318 = EDGE_CURVE('',#31319,#31311,#31321,.T.); +#31319 = VERTEX_POINT('',#31320); +#31320 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#31321 = LINE('',#31322,#31323); +#31322 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#31323 = VECTOR('',#31324,1.); +#31324 = DIRECTION('',(-0.,-1.,-0.)); +#31325 = ORIENTED_EDGE('',*,*,#31326,.F.); +#31326 = EDGE_CURVE('',#31327,#31319,#31329,.T.); +#31327 = VERTEX_POINT('',#31328); +#31328 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#31329 = LINE('',#31330,#31331); +#31330 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#31331 = VECTOR('',#31332,1.); +#31332 = DIRECTION('',(-1.,-0.,-0.)); +#31333 = ORIENTED_EDGE('',*,*,#31334,.F.); +#31334 = EDGE_CURVE('',#31335,#31327,#31337,.T.); +#31335 = VERTEX_POINT('',#31336); +#31336 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#31337 = LINE('',#31338,#31339); +#31338 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#31339 = VECTOR('',#31340,1.); +#31340 = DIRECTION('',(0.,1.,0.)); +#31341 = ORIENTED_EDGE('',*,*,#31342,.F.); +#31342 = EDGE_CURVE('',#31343,#31335,#31345,.T.); +#31343 = VERTEX_POINT('',#31344); +#31344 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31345 = LINE('',#31346,#31347); +#31346 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#31347 = VECTOR('',#31348,1.); +#31348 = DIRECTION('',(-1.,0.,0.)); +#31349 = ORIENTED_EDGE('',*,*,#31350,.F.); +#31350 = EDGE_CURVE('',#31351,#31343,#31353,.T.); +#31351 = VERTEX_POINT('',#31352); +#31352 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#31353 = LINE('',#31354,#31355); +#31354 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31355 = VECTOR('',#31356,1.); +#31356 = DIRECTION('',(0.,-1.,0.)); +#31357 = ORIENTED_EDGE('',*,*,#31358,.F.); +#31358 = EDGE_CURVE('',#31359,#31351,#31361,.T.); +#31359 = VERTEX_POINT('',#31360); +#31360 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#31361 = LINE('',#31362,#31363); +#31362 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#31363 = VECTOR('',#31364,1.); +#31364 = DIRECTION('',(1.,0.,0.)); +#31365 = ORIENTED_EDGE('',*,*,#31366,.F.); +#31366 = EDGE_CURVE('',#31367,#31359,#31369,.T.); +#31367 = VERTEX_POINT('',#31368); +#31368 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#31369 = LINE('',#31370,#31371); +#31370 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#31371 = VECTOR('',#31372,1.); +#31372 = DIRECTION('',(-0.,-1.,-0.)); +#31373 = ORIENTED_EDGE('',*,*,#31374,.F.); +#31374 = EDGE_CURVE('',#31375,#31367,#31377,.T.); +#31375 = VERTEX_POINT('',#31376); +#31376 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#31377 = LINE('',#31378,#31379); +#31378 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#31379 = VECTOR('',#31380,1.); +#31380 = DIRECTION('',(-1.,-0.,-0.)); +#31381 = ORIENTED_EDGE('',*,*,#31382,.F.); +#31382 = EDGE_CURVE('',#31383,#31375,#31385,.T.); +#31383 = VERTEX_POINT('',#31384); +#31384 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#31385 = LINE('',#31386,#31387); +#31386 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31387 = VECTOR('',#31388,1.); +#31388 = DIRECTION('',(0.,-1.,0.)); +#31389 = ORIENTED_EDGE('',*,*,#31390,.F.); +#31390 = EDGE_CURVE('',#31391,#31383,#31393,.T.); +#31391 = VERTEX_POINT('',#31392); +#31392 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#31393 = LINE('',#31394,#31395); +#31394 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#31395 = VECTOR('',#31396,1.); +#31396 = DIRECTION('',(1.,0.,0.)); +#31397 = ORIENTED_EDGE('',*,*,#31398,.F.); +#31398 = EDGE_CURVE('',#31399,#31391,#31401,.T.); +#31399 = VERTEX_POINT('',#31400); +#31400 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#31401 = LINE('',#31402,#31403); +#31402 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#31403 = VECTOR('',#31404,1.); +#31404 = DIRECTION('',(-0.,-1.,-0.)); +#31405 = ORIENTED_EDGE('',*,*,#31406,.F.); +#31406 = EDGE_CURVE('',#31407,#31399,#31409,.T.); +#31407 = VERTEX_POINT('',#31408); +#31408 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#31409 = LINE('',#31410,#31411); +#31410 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#31411 = VECTOR('',#31412,1.); +#31412 = DIRECTION('',(-1.,-0.,-0.)); +#31413 = ORIENTED_EDGE('',*,*,#31414,.F.); +#31414 = EDGE_CURVE('',#31415,#31407,#31417,.T.); +#31415 = VERTEX_POINT('',#31416); +#31416 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#31417 = LINE('',#31418,#31419); +#31418 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31419 = VECTOR('',#31420,1.); +#31420 = DIRECTION('',(0.,-1.,0.)); +#31421 = ORIENTED_EDGE('',*,*,#31422,.F.); +#31422 = EDGE_CURVE('',#31423,#31415,#31425,.T.); +#31423 = VERTEX_POINT('',#31424); +#31424 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#31425 = LINE('',#31426,#31427); +#31426 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#31427 = VECTOR('',#31428,1.); +#31428 = DIRECTION('',(1.,0.,0.)); +#31429 = ORIENTED_EDGE('',*,*,#31430,.F.); +#31430 = EDGE_CURVE('',#31431,#31423,#31433,.T.); +#31431 = VERTEX_POINT('',#31432); +#31432 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#31433 = LINE('',#31434,#31435); +#31434 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#31435 = VECTOR('',#31436,1.); +#31436 = DIRECTION('',(-0.,-1.,-0.)); +#31437 = ORIENTED_EDGE('',*,*,#31438,.F.); +#31438 = EDGE_CURVE('',#31439,#31431,#31441,.T.); +#31439 = VERTEX_POINT('',#31440); +#31440 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#31441 = LINE('',#31442,#31443); +#31442 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#31443 = VECTOR('',#31444,1.); +#31444 = DIRECTION('',(-1.,-0.,-0.)); +#31445 = ORIENTED_EDGE('',*,*,#31446,.F.); +#31446 = EDGE_CURVE('',#31447,#31439,#31449,.T.); +#31447 = VERTEX_POINT('',#31448); +#31448 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#31449 = LINE('',#31450,#31451); +#31450 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31451 = VECTOR('',#31452,1.); +#31452 = DIRECTION('',(0.,-1.,0.)); +#31453 = ORIENTED_EDGE('',*,*,#31454,.F.); +#31454 = EDGE_CURVE('',#31455,#31447,#31457,.T.); +#31455 = VERTEX_POINT('',#31456); +#31456 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#31457 = LINE('',#31458,#31459); +#31458 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#31459 = VECTOR('',#31460,1.); +#31460 = DIRECTION('',(1.,0.,0.)); +#31461 = ORIENTED_EDGE('',*,*,#31462,.F.); +#31462 = EDGE_CURVE('',#31463,#31455,#31465,.T.); +#31463 = VERTEX_POINT('',#31464); +#31464 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#31465 = LINE('',#31466,#31467); +#31466 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#31467 = VECTOR('',#31468,1.); +#31468 = DIRECTION('',(-0.,-1.,-0.)); +#31469 = ORIENTED_EDGE('',*,*,#31470,.F.); +#31470 = EDGE_CURVE('',#31471,#31463,#31473,.T.); +#31471 = VERTEX_POINT('',#31472); +#31472 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#31473 = LINE('',#31474,#31475); +#31474 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#31475 = VECTOR('',#31476,1.); +#31476 = DIRECTION('',(-1.,-0.,-0.)); +#31477 = ORIENTED_EDGE('',*,*,#31478,.F.); +#31478 = EDGE_CURVE('',#31479,#31471,#31481,.T.); +#31479 = VERTEX_POINT('',#31480); +#31480 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#31481 = LINE('',#31482,#31483); +#31482 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31483 = VECTOR('',#31484,1.); +#31484 = DIRECTION('',(0.,-1.,0.)); +#31485 = ORIENTED_EDGE('',*,*,#31486,.F.); +#31486 = EDGE_CURVE('',#31487,#31479,#31489,.T.); +#31487 = VERTEX_POINT('',#31488); +#31488 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#31489 = LINE('',#31490,#31491); +#31490 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#31491 = VECTOR('',#31492,1.); +#31492 = DIRECTION('',(1.,0.,0.)); +#31493 = ORIENTED_EDGE('',*,*,#31494,.F.); +#31494 = EDGE_CURVE('',#31495,#31487,#31497,.T.); +#31495 = VERTEX_POINT('',#31496); +#31496 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#31497 = LINE('',#31498,#31499); +#31498 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#31499 = VECTOR('',#31500,1.); +#31500 = DIRECTION('',(-0.,-1.,-0.)); +#31501 = ORIENTED_EDGE('',*,*,#31502,.F.); +#31502 = EDGE_CURVE('',#31503,#31495,#31505,.T.); +#31503 = VERTEX_POINT('',#31504); +#31504 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#31505 = LINE('',#31506,#31507); +#31506 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#31507 = VECTOR('',#31508,1.); +#31508 = DIRECTION('',(-1.,-0.,-0.)); +#31509 = ORIENTED_EDGE('',*,*,#31510,.F.); +#31510 = EDGE_CURVE('',#31511,#31503,#31513,.T.); +#31511 = VERTEX_POINT('',#31512); +#31512 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#31513 = LINE('',#31514,#31515); +#31514 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31515 = VECTOR('',#31516,1.); +#31516 = DIRECTION('',(0.,-1.,0.)); +#31517 = ORIENTED_EDGE('',*,*,#31518,.F.); +#31518 = EDGE_CURVE('',#31519,#31511,#31521,.T.); +#31519 = VERTEX_POINT('',#31520); +#31520 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#31521 = LINE('',#31522,#31523); +#31522 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#31523 = VECTOR('',#31524,1.); +#31524 = DIRECTION('',(1.,0.,0.)); +#31525 = ORIENTED_EDGE('',*,*,#31526,.F.); +#31526 = EDGE_CURVE('',#31527,#31519,#31529,.T.); +#31527 = VERTEX_POINT('',#31528); +#31528 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#31529 = LINE('',#31530,#31531); +#31530 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#31531 = VECTOR('',#31532,1.); +#31532 = DIRECTION('',(-0.,-1.,-0.)); +#31533 = ORIENTED_EDGE('',*,*,#31534,.F.); +#31534 = EDGE_CURVE('',#31535,#31527,#31537,.T.); +#31535 = VERTEX_POINT('',#31536); +#31536 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#31537 = LINE('',#31538,#31539); +#31538 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#31539 = VECTOR('',#31540,1.); +#31540 = DIRECTION('',(-1.,-0.,-0.)); +#31541 = ORIENTED_EDGE('',*,*,#31542,.F.); +#31542 = EDGE_CURVE('',#31543,#31535,#31545,.T.); +#31543 = VERTEX_POINT('',#31544); +#31544 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#31545 = LINE('',#31546,#31547); +#31546 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31547 = VECTOR('',#31548,1.); +#31548 = DIRECTION('',(0.,-1.,0.)); +#31549 = ORIENTED_EDGE('',*,*,#31550,.F.); +#31550 = EDGE_CURVE('',#31551,#31543,#31553,.T.); +#31551 = VERTEX_POINT('',#31552); +#31552 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#31553 = LINE('',#31554,#31555); +#31554 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#31555 = VECTOR('',#31556,1.); +#31556 = DIRECTION('',(1.,0.,0.)); +#31557 = ORIENTED_EDGE('',*,*,#31558,.F.); +#31558 = EDGE_CURVE('',#31559,#31551,#31561,.T.); +#31559 = VERTEX_POINT('',#31560); +#31560 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#31561 = LINE('',#31562,#31563); +#31562 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#31563 = VECTOR('',#31564,1.); +#31564 = DIRECTION('',(-0.,-1.,-0.)); +#31565 = ORIENTED_EDGE('',*,*,#31566,.F.); +#31566 = EDGE_CURVE('',#31567,#31559,#31569,.T.); +#31567 = VERTEX_POINT('',#31568); +#31568 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#31569 = LINE('',#31570,#31571); +#31570 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#31571 = VECTOR('',#31572,1.); +#31572 = DIRECTION('',(-1.,-0.,-0.)); +#31573 = ORIENTED_EDGE('',*,*,#31574,.F.); +#31574 = EDGE_CURVE('',#31575,#31567,#31577,.T.); +#31575 = VERTEX_POINT('',#31576); +#31576 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#31577 = LINE('',#31578,#31579); +#31578 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31579 = VECTOR('',#31580,1.); +#31580 = DIRECTION('',(0.,-1.,0.)); +#31581 = ORIENTED_EDGE('',*,*,#31582,.F.); +#31582 = EDGE_CURVE('',#31583,#31575,#31585,.T.); +#31583 = VERTEX_POINT('',#31584); +#31584 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#31585 = LINE('',#31586,#31587); +#31586 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#31587 = VECTOR('',#31588,1.); +#31588 = DIRECTION('',(1.,0.,0.)); +#31589 = ORIENTED_EDGE('',*,*,#31590,.F.); +#31590 = EDGE_CURVE('',#31591,#31583,#31593,.T.); +#31591 = VERTEX_POINT('',#31592); +#31592 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#31593 = LINE('',#31594,#31595); +#31594 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#31595 = VECTOR('',#31596,1.); +#31596 = DIRECTION('',(-0.,-1.,-0.)); +#31597 = ORIENTED_EDGE('',*,*,#31598,.F.); +#31598 = EDGE_CURVE('',#31599,#31591,#31601,.T.); +#31599 = VERTEX_POINT('',#31600); +#31600 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#31601 = LINE('',#31602,#31603); +#31602 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#31603 = VECTOR('',#31604,1.); +#31604 = DIRECTION('',(-1.,-0.,-0.)); +#31605 = ORIENTED_EDGE('',*,*,#31606,.F.); +#31606 = EDGE_CURVE('',#31607,#31599,#31609,.T.); +#31607 = VERTEX_POINT('',#31608); +#31608 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#31609 = LINE('',#31610,#31611); +#31610 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31611 = VECTOR('',#31612,1.); +#31612 = DIRECTION('',(0.,-1.,0.)); +#31613 = ORIENTED_EDGE('',*,*,#31614,.F.); +#31614 = EDGE_CURVE('',#31615,#31607,#31617,.T.); +#31615 = VERTEX_POINT('',#31616); +#31616 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#31617 = LINE('',#31618,#31619); +#31618 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#31619 = VECTOR('',#31620,1.); +#31620 = DIRECTION('',(1.,0.,0.)); +#31621 = ORIENTED_EDGE('',*,*,#31622,.F.); +#31622 = EDGE_CURVE('',#31623,#31615,#31625,.T.); +#31623 = VERTEX_POINT('',#31624); +#31624 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#31625 = LINE('',#31626,#31627); +#31626 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#31627 = VECTOR('',#31628,1.); +#31628 = DIRECTION('',(-0.,-1.,-0.)); +#31629 = ORIENTED_EDGE('',*,*,#31630,.F.); +#31630 = EDGE_CURVE('',#31631,#31623,#31633,.T.); +#31631 = VERTEX_POINT('',#31632); +#31632 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#31633 = LINE('',#31634,#31635); +#31634 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#31635 = VECTOR('',#31636,1.); +#31636 = DIRECTION('',(-1.,-0.,-0.)); +#31637 = ORIENTED_EDGE('',*,*,#31638,.F.); +#31638 = EDGE_CURVE('',#31639,#31631,#31641,.T.); +#31639 = VERTEX_POINT('',#31640); +#31640 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#31641 = LINE('',#31642,#31643); +#31642 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31643 = VECTOR('',#31644,1.); +#31644 = DIRECTION('',(0.,-1.,0.)); +#31645 = ORIENTED_EDGE('',*,*,#31646,.F.); +#31646 = EDGE_CURVE('',#31647,#31639,#31649,.T.); +#31647 = VERTEX_POINT('',#31648); +#31648 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#31649 = LINE('',#31650,#31651); +#31650 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#31651 = VECTOR('',#31652,1.); +#31652 = DIRECTION('',(1.,0.,0.)); +#31653 = ORIENTED_EDGE('',*,*,#31654,.F.); +#31654 = EDGE_CURVE('',#31655,#31647,#31657,.T.); +#31655 = VERTEX_POINT('',#31656); +#31656 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#31657 = LINE('',#31658,#31659); +#31658 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#31659 = VECTOR('',#31660,1.); +#31660 = DIRECTION('',(-0.,-1.,-0.)); +#31661 = ORIENTED_EDGE('',*,*,#31662,.F.); +#31662 = EDGE_CURVE('',#31663,#31655,#31665,.T.); +#31663 = VERTEX_POINT('',#31664); +#31664 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#31665 = LINE('',#31666,#31667); +#31666 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#31667 = VECTOR('',#31668,1.); +#31668 = DIRECTION('',(-1.,-0.,-0.)); +#31669 = ORIENTED_EDGE('',*,*,#31670,.F.); +#31670 = EDGE_CURVE('',#31671,#31663,#31673,.T.); +#31671 = VERTEX_POINT('',#31672); +#31672 = CARTESIAN_POINT('',(9.,1.,0.8)); +#31673 = LINE('',#31674,#31675); +#31674 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31675 = VECTOR('',#31676,1.); +#31676 = DIRECTION('',(0.,-1.,0.)); +#31677 = ORIENTED_EDGE('',*,*,#31678,.F.); +#31678 = EDGE_CURVE('',#31679,#31671,#31681,.T.); +#31679 = VERTEX_POINT('',#31680); +#31680 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#31681 = LINE('',#31682,#31683); +#31682 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#31683 = VECTOR('',#31684,1.); +#31684 = DIRECTION('',(1.,0.,0.)); +#31685 = ORIENTED_EDGE('',*,*,#31686,.F.); +#31686 = EDGE_CURVE('',#31687,#31679,#31689,.T.); +#31687 = VERTEX_POINT('',#31688); +#31688 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#31689 = LINE('',#31690,#31691); +#31690 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#31691 = VECTOR('',#31692,1.); +#31692 = DIRECTION('',(-0.,-1.,-0.)); +#31693 = ORIENTED_EDGE('',*,*,#31694,.F.); +#31694 = EDGE_CURVE('',#31695,#31687,#31697,.T.); +#31695 = VERTEX_POINT('',#31696); +#31696 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#31697 = LINE('',#31698,#31699); +#31698 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#31699 = VECTOR('',#31700,1.); +#31700 = DIRECTION('',(-1.,-0.,-0.)); +#31701 = ORIENTED_EDGE('',*,*,#31702,.F.); +#31702 = EDGE_CURVE('',#31703,#31695,#31705,.T.); +#31703 = VERTEX_POINT('',#31704); +#31704 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#31705 = LINE('',#31706,#31707); +#31706 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31707 = VECTOR('',#31708,1.); +#31708 = DIRECTION('',(0.,-1.,0.)); +#31709 = ORIENTED_EDGE('',*,*,#31710,.F.); +#31710 = EDGE_CURVE('',#31711,#31703,#31713,.T.); +#31711 = VERTEX_POINT('',#31712); +#31712 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#31713 = LINE('',#31714,#31715); +#31714 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#31715 = VECTOR('',#31716,1.); +#31716 = DIRECTION('',(1.,0.,0.)); +#31717 = ORIENTED_EDGE('',*,*,#31718,.F.); +#31718 = EDGE_CURVE('',#31719,#31711,#31721,.T.); +#31719 = VERTEX_POINT('',#31720); +#31720 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#31721 = LINE('',#31722,#31723); +#31722 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#31723 = VECTOR('',#31724,1.); +#31724 = DIRECTION('',(-0.,-1.,-0.)); +#31725 = ORIENTED_EDGE('',*,*,#31726,.F.); +#31726 = EDGE_CURVE('',#31727,#31719,#31729,.T.); +#31727 = VERTEX_POINT('',#31728); +#31728 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#31729 = LINE('',#31730,#31731); +#31730 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#31731 = VECTOR('',#31732,1.); +#31732 = DIRECTION('',(-1.,-0.,-0.)); +#31733 = ORIENTED_EDGE('',*,*,#31734,.F.); +#31734 = EDGE_CURVE('',#31735,#31727,#31737,.T.); +#31735 = VERTEX_POINT('',#31736); +#31736 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#31737 = LINE('',#31738,#31739); +#31738 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31739 = VECTOR('',#31740,1.); +#31740 = DIRECTION('',(0.,-1.,0.)); +#31741 = ORIENTED_EDGE('',*,*,#31742,.F.); +#31742 = EDGE_CURVE('',#31743,#31735,#31745,.T.); +#31743 = VERTEX_POINT('',#31744); +#31744 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#31745 = LINE('',#31746,#31747); +#31746 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#31747 = VECTOR('',#31748,1.); +#31748 = DIRECTION('',(1.,0.,0.)); +#31749 = ORIENTED_EDGE('',*,*,#31750,.F.); +#31750 = EDGE_CURVE('',#31751,#31743,#31753,.T.); +#31751 = VERTEX_POINT('',#31752); +#31752 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#31753 = LINE('',#31754,#31755); +#31754 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#31755 = VECTOR('',#31756,1.); +#31756 = DIRECTION('',(-0.,-1.,-0.)); +#31757 = ORIENTED_EDGE('',*,*,#31758,.F.); +#31758 = EDGE_CURVE('',#31759,#31751,#31761,.T.); +#31759 = VERTEX_POINT('',#31760); +#31760 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#31761 = LINE('',#31762,#31763); +#31762 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#31763 = VECTOR('',#31764,1.); +#31764 = DIRECTION('',(-1.,-0.,-0.)); +#31765 = ORIENTED_EDGE('',*,*,#31766,.F.); +#31766 = EDGE_CURVE('',#31767,#31759,#31769,.T.); +#31767 = VERTEX_POINT('',#31768); +#31768 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#31769 = LINE('',#31770,#31771); +#31770 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#31771 = VECTOR('',#31772,1.); +#31772 = DIRECTION('',(0.,-1.,0.)); +#31773 = ORIENTED_EDGE('',*,*,#31774,.F.); +#31774 = EDGE_CURVE('',#31775,#31767,#31777,.T.); +#31775 = VERTEX_POINT('',#31776); +#31776 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#31777 = LINE('',#31778,#31779); +#31778 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#31779 = VECTOR('',#31780,1.); +#31780 = DIRECTION('',(1.,0.,0.)); +#31781 = ORIENTED_EDGE('',*,*,#31782,.F.); +#31782 = EDGE_CURVE('',#31783,#31775,#31785,.T.); +#31783 = VERTEX_POINT('',#31784); +#31784 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#31785 = LINE('',#31786,#31787); +#31786 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#31787 = VECTOR('',#31788,1.); +#31788 = DIRECTION('',(-0.,-1.,-0.)); +#31789 = ORIENTED_EDGE('',*,*,#31790,.F.); +#31790 = EDGE_CURVE('',#28388,#31783,#31791,.T.); +#31791 = LINE('',#31792,#31793); +#31792 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#31793 = VECTOR('',#31794,1.); +#31794 = DIRECTION('',(-1.,-0.,-0.)); +#31795 = ORIENTED_EDGE('',*,*,#28387,.F.); +#31796 = FACE_BOUND('',#31797,.T.); +#31797 = EDGE_LOOP('',(#31798,#31809,#31817,#31826,#31834,#31843,#31851, + #31860)); +#31798 = ORIENTED_EDGE('',*,*,#31799,.F.); +#31799 = EDGE_CURVE('',#31800,#31802,#31804,.T.); +#31800 = VERTEX_POINT('',#31801); +#31801 = CARTESIAN_POINT('',(-7.65,5.9,0.8)); +#31802 = VERTEX_POINT('',#31803); +#31803 = CARTESIAN_POINT('',(-7.9,5.65,0.8)); +#31804 = CIRCLE('',#31805,0.25); +#31805 = AXIS2_PLACEMENT_3D('',#31806,#31807,#31808); +#31806 = CARTESIAN_POINT('',(-7.65,5.65,0.8)); +#31807 = DIRECTION('',(-0.,0.,1.)); +#31808 = DIRECTION('',(0.,-1.,0.)); +#31809 = ORIENTED_EDGE('',*,*,#31810,.T.); +#31810 = EDGE_CURVE('',#31800,#31811,#31813,.T.); +#31811 = VERTEX_POINT('',#31812); +#31812 = CARTESIAN_POINT('',(7.65,5.9,0.8)); +#31813 = LINE('',#31814,#31815); +#31814 = CARTESIAN_POINT('',(-7.9,5.9,0.8)); +#31815 = VECTOR('',#31816,1.); +#31816 = DIRECTION('',(1.,0.,0.)); +#31817 = ORIENTED_EDGE('',*,*,#31818,.T.); +#31818 = EDGE_CURVE('',#31811,#31819,#31821,.T.); +#31819 = VERTEX_POINT('',#31820); +#31820 = CARTESIAN_POINT('',(7.9,5.65,0.8)); +#31821 = CIRCLE('',#31822,0.25); +#31822 = AXIS2_PLACEMENT_3D('',#31823,#31824,#31825); +#31823 = CARTESIAN_POINT('',(7.65,5.65,0.8)); +#31824 = DIRECTION('',(-0.,-0.,-1.)); +#31825 = DIRECTION('',(0.,-1.,0.)); +#31826 = ORIENTED_EDGE('',*,*,#31827,.T.); +#31827 = EDGE_CURVE('',#31819,#31828,#31830,.T.); +#31828 = VERTEX_POINT('',#31829); +#31829 = CARTESIAN_POINT('',(7.9,-11.45,0.8)); +#31830 = LINE('',#31831,#31832); +#31831 = CARTESIAN_POINT('',(7.9,5.9,0.8)); +#31832 = VECTOR('',#31833,1.); +#31833 = DIRECTION('',(0.,-1.,0.)); +#31834 = ORIENTED_EDGE('',*,*,#31835,.T.); +#31835 = EDGE_CURVE('',#31828,#31836,#31838,.T.); +#31836 = VERTEX_POINT('',#31837); +#31837 = CARTESIAN_POINT('',(7.65,-11.7,0.8)); +#31838 = CIRCLE('',#31839,0.25); +#31839 = AXIS2_PLACEMENT_3D('',#31840,#31841,#31842); +#31840 = CARTESIAN_POINT('',(7.65,-11.45,0.8)); +#31841 = DIRECTION('',(-0.,-0.,-1.)); +#31842 = DIRECTION('',(0.,-1.,0.)); +#31843 = ORIENTED_EDGE('',*,*,#31844,.T.); +#31844 = EDGE_CURVE('',#31836,#31845,#31847,.T.); +#31845 = VERTEX_POINT('',#31846); +#31846 = CARTESIAN_POINT('',(-7.65,-11.7,0.8)); +#31847 = LINE('',#31848,#31849); +#31848 = CARTESIAN_POINT('',(7.9,-11.7,0.8)); +#31849 = VECTOR('',#31850,1.); +#31850 = DIRECTION('',(-1.,0.,0.)); +#31851 = ORIENTED_EDGE('',*,*,#31852,.T.); +#31852 = EDGE_CURVE('',#31845,#31853,#31855,.T.); +#31853 = VERTEX_POINT('',#31854); +#31854 = CARTESIAN_POINT('',(-7.9,-11.45,0.8)); +#31855 = CIRCLE('',#31856,0.25); +#31856 = AXIS2_PLACEMENT_3D('',#31857,#31858,#31859); +#31857 = CARTESIAN_POINT('',(-7.65,-11.45,0.8)); +#31858 = DIRECTION('',(-0.,-0.,-1.)); +#31859 = DIRECTION('',(0.,-1.,0.)); +#31860 = ORIENTED_EDGE('',*,*,#31861,.T.); +#31861 = EDGE_CURVE('',#31853,#31802,#31862,.T.); +#31862 = LINE('',#31863,#31864); +#31863 = CARTESIAN_POINT('',(-7.9,-11.7,0.8)); +#31864 = VECTOR('',#31865,1.); +#31865 = DIRECTION('',(0.,1.,0.)); +#31866 = FACE_BOUND('',#31867,.T.); +#31867 = EDGE_LOOP('',(#31868,#31878,#31886,#31894,#31902,#31910,#31918, + #31926,#31934,#31942,#31950,#31958,#31966,#31974,#31982,#31990, + #31998,#32006,#32014,#32022,#32030,#32038,#32046,#32054,#32062, + #32070,#32078,#32086)); +#31868 = ORIENTED_EDGE('',*,*,#31869,.F.); +#31869 = EDGE_CURVE('',#31870,#31872,#31874,.T.); +#31870 = VERTEX_POINT('',#31871); +#31871 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#31872 = VERTEX_POINT('',#31873); +#31873 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#31874 = LINE('',#31875,#31876); +#31875 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#31876 = VECTOR('',#31877,1.); +#31877 = DIRECTION('',(0.,1.,0.)); +#31878 = ORIENTED_EDGE('',*,*,#31879,.F.); +#31879 = EDGE_CURVE('',#31880,#31870,#31882,.T.); +#31880 = VERTEX_POINT('',#31881); +#31881 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#31882 = LINE('',#31883,#31884); +#31883 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#31884 = VECTOR('',#31885,1.); +#31885 = DIRECTION('',(1.,0.,0.)); +#31886 = ORIENTED_EDGE('',*,*,#31887,.F.); +#31887 = EDGE_CURVE('',#31888,#31880,#31890,.T.); +#31888 = VERTEX_POINT('',#31889); +#31889 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#31890 = LINE('',#31891,#31892); +#31891 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#31892 = VECTOR('',#31893,1.); +#31893 = DIRECTION('',(0.,-1.,0.)); +#31894 = ORIENTED_EDGE('',*,*,#31895,.F.); +#31895 = EDGE_CURVE('',#31896,#31888,#31898,.T.); +#31896 = VERTEX_POINT('',#31897); +#31897 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#31898 = LINE('',#31899,#31900); +#31899 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#31900 = VECTOR('',#31901,1.); +#31901 = DIRECTION('',(1.,0.,0.)); +#31902 = ORIENTED_EDGE('',*,*,#31903,.F.); +#31903 = EDGE_CURVE('',#31904,#31896,#31906,.T.); +#31904 = VERTEX_POINT('',#31905); +#31905 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#31906 = LINE('',#31907,#31908); +#31907 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#31908 = VECTOR('',#31909,1.); +#31909 = DIRECTION('',(0.,1.,0.)); +#31910 = ORIENTED_EDGE('',*,*,#31911,.F.); +#31911 = EDGE_CURVE('',#31912,#31904,#31914,.T.); +#31912 = VERTEX_POINT('',#31913); +#31913 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#31914 = LINE('',#31915,#31916); +#31915 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#31916 = VECTOR('',#31917,1.); +#31917 = DIRECTION('',(1.,0.,0.)); +#31918 = ORIENTED_EDGE('',*,*,#31919,.F.); +#31919 = EDGE_CURVE('',#31920,#31912,#31922,.T.); +#31920 = VERTEX_POINT('',#31921); +#31921 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#31922 = LINE('',#31923,#31924); +#31923 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#31924 = VECTOR('',#31925,1.); +#31925 = DIRECTION('',(0.,-1.,0.)); +#31926 = ORIENTED_EDGE('',*,*,#31927,.F.); +#31927 = EDGE_CURVE('',#31928,#31920,#31930,.T.); +#31928 = VERTEX_POINT('',#31929); +#31929 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#31930 = LINE('',#31931,#31932); +#31931 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#31932 = VECTOR('',#31933,1.); +#31933 = DIRECTION('',(1.,0.,0.)); +#31934 = ORIENTED_EDGE('',*,*,#31935,.F.); +#31935 = EDGE_CURVE('',#31936,#31928,#31938,.T.); +#31936 = VERTEX_POINT('',#31937); +#31937 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#31938 = LINE('',#31939,#31940); +#31939 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#31940 = VECTOR('',#31941,1.); +#31941 = DIRECTION('',(0.,1.,0.)); +#31942 = ORIENTED_EDGE('',*,*,#31943,.F.); +#31943 = EDGE_CURVE('',#31944,#31936,#31946,.T.); +#31944 = VERTEX_POINT('',#31945); +#31945 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#31946 = LINE('',#31947,#31948); +#31947 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#31948 = VECTOR('',#31949,1.); +#31949 = DIRECTION('',(1.,0.,0.)); +#31950 = ORIENTED_EDGE('',*,*,#31951,.F.); +#31951 = EDGE_CURVE('',#31952,#31944,#31954,.T.); +#31952 = VERTEX_POINT('',#31953); +#31953 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#31954 = LINE('',#31955,#31956); +#31955 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#31956 = VECTOR('',#31957,1.); +#31957 = DIRECTION('',(0.,-1.,0.)); +#31958 = ORIENTED_EDGE('',*,*,#31959,.F.); +#31959 = EDGE_CURVE('',#31960,#31952,#31962,.T.); +#31960 = VERTEX_POINT('',#31961); +#31961 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#31962 = LINE('',#31963,#31964); +#31963 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#31964 = VECTOR('',#31965,1.); +#31965 = DIRECTION('',(1.,0.,0.)); +#31966 = ORIENTED_EDGE('',*,*,#31967,.F.); +#31967 = EDGE_CURVE('',#31968,#31960,#31970,.T.); +#31968 = VERTEX_POINT('',#31969); +#31969 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#31970 = LINE('',#31971,#31972); +#31971 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#31972 = VECTOR('',#31973,1.); +#31973 = DIRECTION('',(0.,1.,0.)); +#31974 = ORIENTED_EDGE('',*,*,#31975,.F.); +#31975 = EDGE_CURVE('',#31976,#31968,#31978,.T.); +#31976 = VERTEX_POINT('',#31977); +#31977 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#31978 = LINE('',#31979,#31980); +#31979 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#31980 = VECTOR('',#31981,1.); +#31981 = DIRECTION('',(1.,0.,0.)); +#31982 = ORIENTED_EDGE('',*,*,#31983,.F.); +#31983 = EDGE_CURVE('',#31984,#31976,#31986,.T.); +#31984 = VERTEX_POINT('',#31985); +#31985 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#31986 = LINE('',#31987,#31988); +#31987 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#31988 = VECTOR('',#31989,1.); +#31989 = DIRECTION('',(0.,-1.,0.)); +#31990 = ORIENTED_EDGE('',*,*,#31991,.F.); +#31991 = EDGE_CURVE('',#31992,#31984,#31994,.T.); +#31992 = VERTEX_POINT('',#31993); +#31993 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#31994 = LINE('',#31995,#31996); +#31995 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#31996 = VECTOR('',#31997,1.); +#31997 = DIRECTION('',(1.,0.,0.)); +#31998 = ORIENTED_EDGE('',*,*,#31999,.F.); +#31999 = EDGE_CURVE('',#32000,#31992,#32002,.T.); +#32000 = VERTEX_POINT('',#32001); +#32001 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#32002 = LINE('',#32003,#32004); +#32003 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#32004 = VECTOR('',#32005,1.); +#32005 = DIRECTION('',(0.,1.,0.)); +#32006 = ORIENTED_EDGE('',*,*,#32007,.F.); +#32007 = EDGE_CURVE('',#32008,#32000,#32010,.T.); +#32008 = VERTEX_POINT('',#32009); +#32009 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#32010 = LINE('',#32011,#32012); +#32011 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#32012 = VECTOR('',#32013,1.); +#32013 = DIRECTION('',(1.,0.,0.)); +#32014 = ORIENTED_EDGE('',*,*,#32015,.F.); +#32015 = EDGE_CURVE('',#32016,#32008,#32018,.T.); +#32016 = VERTEX_POINT('',#32017); +#32017 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#32018 = LINE('',#32019,#32020); +#32019 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#32020 = VECTOR('',#32021,1.); +#32021 = DIRECTION('',(0.,-1.,0.)); +#32022 = ORIENTED_EDGE('',*,*,#32023,.F.); +#32023 = EDGE_CURVE('',#32024,#32016,#32026,.T.); +#32024 = VERTEX_POINT('',#32025); +#32025 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#32026 = LINE('',#32027,#32028); +#32027 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#32028 = VECTOR('',#32029,1.); +#32029 = DIRECTION('',(-1.,0.,0.)); +#32030 = ORIENTED_EDGE('',*,*,#32031,.F.); +#32031 = EDGE_CURVE('',#32032,#32024,#32034,.T.); +#32032 = VERTEX_POINT('',#32033); +#32033 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#32034 = LINE('',#32035,#32036); +#32035 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#32036 = VECTOR('',#32037,1.); +#32037 = DIRECTION('',(0.,1.,0.)); +#32038 = ORIENTED_EDGE('',*,*,#32039,.F.); +#32039 = EDGE_CURVE('',#32040,#32032,#32042,.T.); +#32040 = VERTEX_POINT('',#32041); +#32041 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#32042 = LINE('',#32043,#32044); +#32043 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#32044 = VECTOR('',#32045,1.); +#32045 = DIRECTION('',(-1.,0.,0.)); +#32046 = ORIENTED_EDGE('',*,*,#32047,.F.); +#32047 = EDGE_CURVE('',#32048,#32040,#32050,.T.); +#32048 = VERTEX_POINT('',#32049); +#32049 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#32050 = LINE('',#32051,#32052); +#32051 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#32052 = VECTOR('',#32053,1.); +#32053 = DIRECTION('',(0.,-1.,0.)); +#32054 = ORIENTED_EDGE('',*,*,#32055,.F.); +#32055 = EDGE_CURVE('',#32056,#32048,#32058,.T.); +#32056 = VERTEX_POINT('',#32057); +#32057 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#32058 = LINE('',#32059,#32060); +#32059 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#32060 = VECTOR('',#32061,1.); +#32061 = DIRECTION('',(-1.,0.,0.)); +#32062 = ORIENTED_EDGE('',*,*,#32063,.F.); +#32063 = EDGE_CURVE('',#32064,#32056,#32066,.T.); +#32064 = VERTEX_POINT('',#32065); +#32065 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#32066 = LINE('',#32067,#32068); +#32067 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#32068 = VECTOR('',#32069,1.); +#32069 = DIRECTION('',(0.,1.,0.)); +#32070 = ORIENTED_EDGE('',*,*,#32071,.F.); +#32071 = EDGE_CURVE('',#32072,#32064,#32074,.T.); +#32072 = VERTEX_POINT('',#32073); +#32073 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#32074 = LINE('',#32075,#32076); +#32075 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#32076 = VECTOR('',#32077,1.); +#32077 = DIRECTION('',(-1.,0.,0.)); +#32078 = ORIENTED_EDGE('',*,*,#32079,.F.); +#32079 = EDGE_CURVE('',#32080,#32072,#32082,.T.); +#32080 = VERTEX_POINT('',#32081); +#32081 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#32082 = LINE('',#32083,#32084); +#32083 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#32084 = VECTOR('',#32085,1.); +#32085 = DIRECTION('',(0.,-1.,0.)); +#32086 = ORIENTED_EDGE('',*,*,#32087,.F.); +#32087 = EDGE_CURVE('',#31872,#32080,#32088,.T.); +#32088 = LINE('',#32089,#32090); +#32089 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#32090 = VECTOR('',#32091,1.); +#32091 = DIRECTION('',(-1.,0.,0.)); +#32092 = PLANE('',#32093); +#32093 = AXIS2_PLACEMENT_3D('',#32094,#32095,#32096); +#32094 = CARTESIAN_POINT('',(0.,0.,0.8)); +#32095 = DIRECTION('',(0.,0.,1.)); +#32096 = DIRECTION('',(1.,0.,-0.)); +#32097 = ADVANCED_FACE('',(#32098),#32124,.F.); +#32098 = FACE_BOUND('',#32099,.F.); +#32099 = EDGE_LOOP('',(#32100,#32101,#32102,#32110,#32118)); +#32100 = ORIENTED_EDGE('',*,*,#28347,.F.); +#32101 = ORIENTED_EDGE('',*,*,#28355,.F.); +#32102 = ORIENTED_EDGE('',*,*,#32103,.T.); +#32103 = EDGE_CURVE('',#28356,#32104,#32106,.T.); +#32104 = VERTEX_POINT('',#32105); +#32105 = CARTESIAN_POINT('',(-9.,5.535,0.8)); +#32106 = LINE('',#32107,#32108); +#32107 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#32108 = VECTOR('',#32109,1.); +#32109 = DIRECTION('',(0.,-1.,0.)); +#32110 = ORIENTED_EDGE('',*,*,#32111,.F.); +#32111 = EDGE_CURVE('',#32112,#32104,#32114,.T.); +#32112 = VERTEX_POINT('',#32113); +#32113 = CARTESIAN_POINT('',(-9.,5.535,0.)); +#32114 = LINE('',#32115,#32116); +#32115 = CARTESIAN_POINT('',(-9.,5.535,0.)); +#32116 = VECTOR('',#32117,1.); +#32117 = DIRECTION('',(0.,0.,1.)); +#32118 = ORIENTED_EDGE('',*,*,#32119,.F.); +#32119 = EDGE_CURVE('',#28340,#32112,#32120,.T.); +#32120 = LINE('',#32121,#32122); +#32121 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#32122 = VECTOR('',#32123,1.); +#32123 = DIRECTION('',(0.,-1.,0.)); +#32124 = PLANE('',#32125); +#32125 = AXIS2_PLACEMENT_3D('',#32126,#32127,#32128); +#32126 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#32127 = DIRECTION('',(1.,0.,0.)); +#32128 = DIRECTION('',(0.,-1.,0.)); +#32129 = ADVANCED_FACE('',(#32130),#32164,.F.); +#32130 = FACE_BOUND('',#32131,.F.); +#32131 = EDGE_LOOP('',(#32132,#32142,#32150,#32156,#32157,#32158)); +#32132 = ORIENTED_EDGE('',*,*,#32133,.T.); +#32133 = EDGE_CURVE('',#32134,#32136,#32138,.T.); +#32134 = VERTEX_POINT('',#32135); +#32135 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.145767343E-06)); +#32136 = VERTEX_POINT('',#32137); +#32137 = CARTESIAN_POINT('',(9.000000023842,5.535,-2.145767343E-06)); +#32138 = LINE('',#32139,#32140); +#32139 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#32140 = VECTOR('',#32141,1.); +#32141 = DIRECTION('',(0.,-1.,0.)); +#32142 = ORIENTED_EDGE('',*,*,#32143,.T.); +#32143 = EDGE_CURVE('',#32136,#32144,#32146,.T.); +#32144 = VERTEX_POINT('',#32145); +#32145 = CARTESIAN_POINT('',(9.000000214576,5.535,0.799997854233)); +#32146 = LINE('',#32147,#32148); +#32147 = CARTESIAN_POINT('',(9.000000023842,5.535,-2.14576734264E-06)); +#32148 = VECTOR('',#32149,1.); +#32149 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32150 = ORIENTED_EDGE('',*,*,#32151,.F.); +#32151 = EDGE_CURVE('',#28396,#32144,#32152,.T.); +#32152 = LINE('',#32153,#32154); +#32153 = CARTESIAN_POINT('',(9.000000214576,5.71,0.799997854233)); +#32154 = VECTOR('',#32155,1.); +#32155 = DIRECTION('',(0.,-1.,0.)); +#32156 = ORIENTED_EDGE('',*,*,#28403,.T.); +#32157 = ORIENTED_EDGE('',*,*,#28411,.T.); +#32158 = ORIENTED_EDGE('',*,*,#32159,.F.); +#32159 = EDGE_CURVE('',#32134,#28379,#32160,.T.); +#32160 = LINE('',#32161,#32162); +#32161 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#32162 = VECTOR('',#32163,1.); +#32163 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32164 = PLANE('',#32165); +#32165 = AXIS2_PLACEMENT_3D('',#32166,#32167,#32168); +#32166 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#32167 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32168 = DIRECTION('',(0.,1.,0.)); +#32169 = ADVANCED_FACE('',(#32170),#32188,.T.); +#32170 = FACE_BOUND('',#32171,.F.); +#32171 = EDGE_LOOP('',(#32172,#32173,#32174,#32182)); +#32172 = ORIENTED_EDGE('',*,*,#31790,.F.); +#32173 = ORIENTED_EDGE('',*,*,#28395,.T.); +#32174 = ORIENTED_EDGE('',*,*,#32175,.T.); +#32175 = EDGE_CURVE('',#28396,#32176,#32178,.T.); +#32176 = VERTEX_POINT('',#32177); +#32177 = CARTESIAN_POINT('',(8.550000214576,5.71,0.799997961521)); +#32178 = LINE('',#32179,#32180); +#32179 = CARTESIAN_POINT('',(9.000000214576,5.71,0.799997854233)); +#32180 = VECTOR('',#32181,1.); +#32181 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32182 = ORIENTED_EDGE('',*,*,#32183,.F.); +#32183 = EDGE_CURVE('',#31783,#32176,#32184,.T.); +#32184 = LINE('',#32185,#32186); +#32185 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#32186 = VECTOR('',#32187,1.); +#32187 = DIRECTION('',(0.,0.,-1.)); +#32188 = PLANE('',#32189); +#32189 = AXIS2_PLACEMENT_3D('',#32190,#32191,#32192); +#32190 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#32191 = DIRECTION('',(-0.,-1.,-0.)); +#32192 = DIRECTION('',(1.,-0.,0.)); +#32193 = ADVANCED_FACE('',(#32194),#32217,.F.); +#32194 = FACE_BOUND('',#32195,.T.); +#32195 = EDGE_LOOP('',(#32196,#32205,#32206,#32207,#32208,#32209,#32210, + #32211)); +#32196 = ORIENTED_EDGE('',*,*,#32197,.T.); +#32197 = EDGE_CURVE('',#32198,#32112,#32200,.T.); +#32198 = VERTEX_POINT('',#32199); +#32199 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#32200 = CIRCLE('',#32201,0.275); +#32201 = AXIS2_PLACEMENT_3D('',#32202,#32203,#32204); +#32202 = CARTESIAN_POINT('',(-9.,5.26,0.)); +#32203 = DIRECTION('',(0.,0.,1.)); +#32204 = DIRECTION('',(1.,0.,-0.)); +#32205 = ORIENTED_EDGE('',*,*,#32119,.F.); +#32206 = ORIENTED_EDGE('',*,*,#28427,.T.); +#32207 = ORIENTED_EDGE('',*,*,#28435,.T.); +#32208 = ORIENTED_EDGE('',*,*,#28443,.T.); +#32209 = ORIENTED_EDGE('',*,*,#28451,.F.); +#32210 = ORIENTED_EDGE('',*,*,#28459,.T.); +#32211 = ORIENTED_EDGE('',*,*,#32212,.F.); +#32212 = EDGE_CURVE('',#32198,#28460,#32213,.T.); +#32213 = LINE('',#32214,#32215); +#32214 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#32215 = VECTOR('',#32216,1.); +#32216 = DIRECTION('',(0.,-1.,0.)); +#32217 = PLANE('',#32218); +#32218 = AXIS2_PLACEMENT_3D('',#32219,#32220,#32221); +#32219 = CARTESIAN_POINT('',(-8.571261896074,5.26,0.)); +#32220 = DIRECTION('',(0.,0.,1.)); +#32221 = DIRECTION('',(1.,0.,-0.)); +#32222 = ADVANCED_FACE('',(#32223),#32242,.T.); +#32223 = FACE_BOUND('',#32224,.F.); +#32224 = EDGE_LOOP('',(#32225,#32233,#32234,#32235,#32236)); +#32225 = ORIENTED_EDGE('',*,*,#32226,.F.); +#32226 = EDGE_CURVE('',#32134,#32227,#32229,.T.); +#32227 = VERTEX_POINT('',#32228); +#32228 = CARTESIAN_POINT('',(8.150000023842,5.71,-1.943111538E-06)); +#32229 = LINE('',#32230,#32231); +#32230 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#32231 = VECTOR('',#32232,1.); +#32232 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32233 = ORIENTED_EDGE('',*,*,#32159,.T.); +#32234 = ORIENTED_EDGE('',*,*,#30251,.T.); +#32235 = ORIENTED_EDGE('',*,*,#30243,.T.); +#32236 = ORIENTED_EDGE('',*,*,#32237,.F.); +#32237 = EDGE_CURVE('',#32227,#30236,#32238,.T.); +#32238 = LINE('',#32239,#32240); +#32239 = CARTESIAN_POINT('',(8.150000023842,5.71,-1.94311153833E-06)); +#32240 = VECTOR('',#32241,1.); +#32241 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32242 = PLANE('',#32243); +#32243 = AXIS2_PLACEMENT_3D('',#32244,#32245,#32246); +#32244 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#32245 = DIRECTION('',(0.,1.,0.)); +#32246 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#32247 = ADVANCED_FACE('',(#32248),#32266,.T.); +#32248 = FACE_BOUND('',#32249,.F.); +#32249 = EDGE_LOOP('',(#32250,#32258,#32259,#32260)); +#32250 = ORIENTED_EDGE('',*,*,#32251,.F.); +#32251 = EDGE_CURVE('',#32227,#32252,#32254,.T.); +#32252 = VERTEX_POINT('',#32253); +#32253 = CARTESIAN_POINT('',(8.150000023842,4.81,-1.943111538E-06)); +#32254 = LINE('',#32255,#32256); +#32255 = CARTESIAN_POINT('',(8.150000023842,5.71,-1.94311153833E-06)); +#32256 = VECTOR('',#32257,1.); +#32257 = DIRECTION('',(0.,-1.,0.)); +#32258 = ORIENTED_EDGE('',*,*,#32237,.T.); +#32259 = ORIENTED_EDGE('',*,*,#30235,.T.); +#32260 = ORIENTED_EDGE('',*,*,#32261,.F.); +#32261 = EDGE_CURVE('',#32252,#30228,#32262,.T.); +#32262 = LINE('',#32263,#32264); +#32263 = CARTESIAN_POINT('',(8.150000023842,4.81,-1.94311153833E-06)); +#32264 = VECTOR('',#32265,1.); +#32265 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32266 = PLANE('',#32267); +#32267 = AXIS2_PLACEMENT_3D('',#32268,#32269,#32270); +#32268 = CARTESIAN_POINT('',(8.150000023842,5.71,-1.94311153833E-06)); +#32269 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32270 = DIRECTION('',(0.,1.,0.)); +#32271 = ADVANCED_FACE('',(#32272),#32291,.T.); +#32272 = FACE_BOUND('',#32273,.F.); +#32273 = EDGE_LOOP('',(#32274,#32282,#32283,#32284,#32285)); +#32274 = ORIENTED_EDGE('',*,*,#32275,.F.); +#32275 = EDGE_CURVE('',#32252,#32276,#32278,.T.); +#32276 = VERTEX_POINT('',#32277); +#32277 = CARTESIAN_POINT('',(9.000000023842,4.81,-2.145767343E-06)); +#32278 = LINE('',#32279,#32280); +#32279 = CARTESIAN_POINT('',(8.150000023842,4.81,-1.94311153833E-06)); +#32280 = VECTOR('',#32281,1.); +#32281 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#32282 = ORIENTED_EDGE('',*,*,#32261,.T.); +#32283 = ORIENTED_EDGE('',*,*,#30227,.F.); +#32284 = ORIENTED_EDGE('',*,*,#30219,.T.); +#32285 = ORIENTED_EDGE('',*,*,#32286,.F.); +#32286 = EDGE_CURVE('',#32276,#30212,#32287,.T.); +#32287 = LINE('',#32288,#32289); +#32288 = CARTESIAN_POINT('',(9.000000023842,4.81,-2.14576734264E-06)); +#32289 = VECTOR('',#32290,1.); +#32290 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32291 = PLANE('',#32292); +#32292 = AXIS2_PLACEMENT_3D('',#32293,#32294,#32295); +#32293 = CARTESIAN_POINT('',(8.150000023842,4.81,-1.94311153833E-06)); +#32294 = DIRECTION('',(0.,-1.,0.)); +#32295 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32296 = ADVANCED_FACE('',(#32297),#32329,.T.); +#32297 = FACE_BOUND('',#32298,.T.); +#32298 = EDGE_LOOP('',(#32299,#32300,#32308,#32314,#32315,#32323)); +#32299 = ORIENTED_EDGE('',*,*,#28467,.F.); +#32300 = ORIENTED_EDGE('',*,*,#32301,.F.); +#32301 = EDGE_CURVE('',#32302,#28468,#32304,.T.); +#32302 = VERTEX_POINT('',#32303); +#32303 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#32304 = LINE('',#32305,#32306); +#32305 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#32306 = VECTOR('',#32307,1.); +#32307 = DIRECTION('',(-0.,-0.,-1.)); +#32308 = ORIENTED_EDGE('',*,*,#32309,.F.); +#32309 = EDGE_CURVE('',#30599,#32302,#32310,.T.); +#32310 = LINE('',#32311,#32312); +#32311 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#32312 = VECTOR('',#32313,1.); +#32313 = DIRECTION('',(-0.,-0.,-1.)); +#32314 = ORIENTED_EDGE('',*,*,#30598,.T.); +#32315 = ORIENTED_EDGE('',*,*,#32316,.T.); +#32316 = EDGE_CURVE('',#30591,#32317,#32319,.T.); +#32317 = VERTEX_POINT('',#32318); +#32318 = CARTESIAN_POINT('',(-9.,4.81,0.4)); +#32319 = LINE('',#32320,#32321); +#32320 = CARTESIAN_POINT('',(-9.,4.81,0.8)); +#32321 = VECTOR('',#32322,1.); +#32322 = DIRECTION('',(-0.,-0.,-1.)); +#32323 = ORIENTED_EDGE('',*,*,#32324,.T.); +#32324 = EDGE_CURVE('',#32317,#28460,#32325,.T.); +#32325 = LINE('',#32326,#32327); +#32326 = CARTESIAN_POINT('',(-9.,4.81,0.4)); +#32327 = VECTOR('',#32328,1.); +#32328 = DIRECTION('',(-0.,-0.,-1.)); +#32329 = PLANE('',#32330); +#32330 = AXIS2_PLACEMENT_3D('',#32331,#32332,#32333); +#32331 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#32332 = DIRECTION('',(-1.,0.,0.)); +#32333 = DIRECTION('',(0.,1.,0.)); +#32334 = ADVANCED_FACE('',(#32335),#32383,.T.); +#32335 = FACE_BOUND('',#32336,.T.); +#32336 = EDGE_LOOP('',(#32337,#32338,#32346,#32354,#32360,#32361,#32369, + #32377)); +#32337 = ORIENTED_EDGE('',*,*,#30211,.F.); +#32338 = ORIENTED_EDGE('',*,*,#32339,.F.); +#32339 = EDGE_CURVE('',#32340,#30212,#32342,.T.); +#32340 = VERTEX_POINT('',#32341); +#32341 = CARTESIAN_POINT('',(9.,4.81,0.4)); +#32342 = LINE('',#32343,#32344); +#32343 = CARTESIAN_POINT('',(9.,4.81,0.4)); +#32344 = VECTOR('',#32345,1.); +#32345 = DIRECTION('',(0.,0.,-1.)); +#32346 = ORIENTED_EDGE('',*,*,#32347,.F.); +#32347 = EDGE_CURVE('',#32348,#32340,#32350,.T.); +#32348 = VERTEX_POINT('',#32349); +#32349 = CARTESIAN_POINT('',(9.000000214576,4.81,0.799997854233)); +#32350 = LINE('',#32351,#32352); +#32351 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#32352 = VECTOR('',#32353,1.); +#32353 = DIRECTION('',(0.,0.,-1.)); +#32354 = ORIENTED_EDGE('',*,*,#32355,.F.); +#32355 = EDGE_CURVE('',#31767,#32348,#32356,.T.); +#32356 = LINE('',#32357,#32358); +#32357 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#32358 = VECTOR('',#32359,1.); +#32359 = DIRECTION('',(0.,0.,-1.)); +#32360 = ORIENTED_EDGE('',*,*,#31766,.T.); +#32361 = ORIENTED_EDGE('',*,*,#32362,.T.); +#32362 = EDGE_CURVE('',#31759,#32363,#32365,.T.); +#32363 = VERTEX_POINT('',#32364); +#32364 = CARTESIAN_POINT('',(9.000000214576,4.44,0.799997854233)); +#32365 = LINE('',#32366,#32367); +#32366 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#32367 = VECTOR('',#32368,1.); +#32368 = DIRECTION('',(0.,0.,-1.)); +#32369 = ORIENTED_EDGE('',*,*,#32370,.T.); +#32370 = EDGE_CURVE('',#32363,#32371,#32373,.T.); +#32371 = VERTEX_POINT('',#32372); +#32372 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#32373 = LINE('',#32374,#32375); +#32374 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#32375 = VECTOR('',#32376,1.); +#32376 = DIRECTION('',(0.,0.,-1.)); +#32377 = ORIENTED_EDGE('',*,*,#32378,.T.); +#32378 = EDGE_CURVE('',#32371,#30204,#32379,.T.); +#32379 = LINE('',#32380,#32381); +#32380 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#32381 = VECTOR('',#32382,1.); +#32382 = DIRECTION('',(0.,0.,-1.)); +#32383 = PLANE('',#32384); +#32384 = AXIS2_PLACEMENT_3D('',#32385,#32386,#32387); +#32385 = CARTESIAN_POINT('',(9.,12.75,0.)); +#32386 = DIRECTION('',(1.,0.,0.)); +#32387 = DIRECTION('',(0.,-1.,0.)); +#32388 = ADVANCED_FACE('',(#32389),#32419,.F.); +#32389 = FACE_BOUND('',#32390,.T.); +#32390 = EDGE_LOOP('',(#32391,#32402,#32408,#32409,#32410,#32411,#32412, + #32413)); +#32391 = ORIENTED_EDGE('',*,*,#32392,.T.); +#32392 = EDGE_CURVE('',#32393,#32395,#32397,.T.); +#32393 = VERTEX_POINT('',#32394); +#32394 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#32395 = VERTEX_POINT('',#32396); +#32396 = CARTESIAN_POINT('',(-9.,4.265,0.)); +#32397 = CIRCLE('',#32398,0.275); +#32398 = AXIS2_PLACEMENT_3D('',#32399,#32400,#32401); +#32399 = CARTESIAN_POINT('',(-9.,3.99,0.)); +#32400 = DIRECTION('',(0.,0.,1.)); +#32401 = DIRECTION('',(1.,0.,-0.)); +#32402 = ORIENTED_EDGE('',*,*,#32403,.F.); +#32403 = EDGE_CURVE('',#28468,#32395,#32404,.T.); +#32404 = LINE('',#32405,#32406); +#32405 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#32406 = VECTOR('',#32407,1.); +#32407 = DIRECTION('',(0.,-1.,0.)); +#32408 = ORIENTED_EDGE('',*,*,#28475,.T.); +#32409 = ORIENTED_EDGE('',*,*,#28483,.T.); +#32410 = ORIENTED_EDGE('',*,*,#28491,.T.); +#32411 = ORIENTED_EDGE('',*,*,#28499,.F.); +#32412 = ORIENTED_EDGE('',*,*,#28507,.T.); +#32413 = ORIENTED_EDGE('',*,*,#32414,.F.); +#32414 = EDGE_CURVE('',#32393,#28508,#32415,.T.); +#32415 = LINE('',#32416,#32417); +#32416 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#32417 = VECTOR('',#32418,1.); +#32418 = DIRECTION('',(0.,-1.,0.)); +#32419 = PLANE('',#32420); +#32420 = AXIS2_PLACEMENT_3D('',#32421,#32422,#32423); +#32421 = CARTESIAN_POINT('',(-8.571261896074,3.99,0.)); +#32422 = DIRECTION('',(0.,0.,1.)); +#32423 = DIRECTION('',(1.,0.,-0.)); +#32424 = ADVANCED_FACE('',(#32425),#32451,.T.); +#32425 = FACE_BOUND('',#32426,.F.); +#32426 = EDGE_LOOP('',(#32427,#32437,#32443,#32444,#32445)); +#32427 = ORIENTED_EDGE('',*,*,#32428,.F.); +#32428 = EDGE_CURVE('',#32429,#32431,#32433,.T.); +#32429 = VERTEX_POINT('',#32430); +#32430 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.145767343E-06)); +#32431 = VERTEX_POINT('',#32432); +#32432 = CARTESIAN_POINT('',(8.150000023842,4.44,-1.943111538E-06)); +#32433 = LINE('',#32434,#32435); +#32434 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#32435 = VECTOR('',#32436,1.); +#32436 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32437 = ORIENTED_EDGE('',*,*,#32438,.T.); +#32438 = EDGE_CURVE('',#32429,#30204,#32439,.T.); +#32439 = LINE('',#32440,#32441); +#32440 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#32441 = VECTOR('',#32442,1.); +#32442 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32443 = ORIENTED_EDGE('',*,*,#30203,.T.); +#32444 = ORIENTED_EDGE('',*,*,#30195,.T.); +#32445 = ORIENTED_EDGE('',*,*,#32446,.F.); +#32446 = EDGE_CURVE('',#32431,#30188,#32447,.T.); +#32447 = LINE('',#32448,#32449); +#32448 = CARTESIAN_POINT('',(8.150000023842,4.44,-1.94311153833E-06)); +#32449 = VECTOR('',#32450,1.); +#32450 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32451 = PLANE('',#32452); +#32452 = AXIS2_PLACEMENT_3D('',#32453,#32454,#32455); +#32453 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#32454 = DIRECTION('',(0.,1.,0.)); +#32455 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#32456 = ADVANCED_FACE('',(#32457),#32475,.T.); +#32457 = FACE_BOUND('',#32458,.F.); +#32458 = EDGE_LOOP('',(#32459,#32467,#32468,#32469)); +#32459 = ORIENTED_EDGE('',*,*,#32460,.F.); +#32460 = EDGE_CURVE('',#32431,#32461,#32463,.T.); +#32461 = VERTEX_POINT('',#32462); +#32462 = CARTESIAN_POINT('',(8.150000023842,3.54,-1.943111538E-06)); +#32463 = LINE('',#32464,#32465); +#32464 = CARTESIAN_POINT('',(8.150000023842,4.44,-1.94311153833E-06)); +#32465 = VECTOR('',#32466,1.); +#32466 = DIRECTION('',(0.,-1.,0.)); +#32467 = ORIENTED_EDGE('',*,*,#32446,.T.); +#32468 = ORIENTED_EDGE('',*,*,#30187,.T.); +#32469 = ORIENTED_EDGE('',*,*,#32470,.F.); +#32470 = EDGE_CURVE('',#32461,#30180,#32471,.T.); +#32471 = LINE('',#32472,#32473); +#32472 = CARTESIAN_POINT('',(8.150000023842,3.54,-1.94311153833E-06)); +#32473 = VECTOR('',#32474,1.); +#32474 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32475 = PLANE('',#32476); +#32476 = AXIS2_PLACEMENT_3D('',#32477,#32478,#32479); +#32477 = CARTESIAN_POINT('',(8.150000023842,4.44,-1.94311153833E-06)); +#32478 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32479 = DIRECTION('',(0.,1.,0.)); +#32480 = ADVANCED_FACE('',(#32481),#32500,.T.); +#32481 = FACE_BOUND('',#32482,.F.); +#32482 = EDGE_LOOP('',(#32483,#32491,#32492,#32493,#32494)); +#32483 = ORIENTED_EDGE('',*,*,#32484,.F.); +#32484 = EDGE_CURVE('',#32461,#32485,#32487,.T.); +#32485 = VERTEX_POINT('',#32486); +#32486 = CARTESIAN_POINT('',(9.000000023842,3.54,-2.145767343E-06)); +#32487 = LINE('',#32488,#32489); +#32488 = CARTESIAN_POINT('',(8.150000023842,3.54,-1.94311153833E-06)); +#32489 = VECTOR('',#32490,1.); +#32490 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#32491 = ORIENTED_EDGE('',*,*,#32470,.T.); +#32492 = ORIENTED_EDGE('',*,*,#30179,.F.); +#32493 = ORIENTED_EDGE('',*,*,#30171,.T.); +#32494 = ORIENTED_EDGE('',*,*,#32495,.F.); +#32495 = EDGE_CURVE('',#32485,#30164,#32496,.T.); +#32496 = LINE('',#32497,#32498); +#32497 = CARTESIAN_POINT('',(9.000000023842,3.54,-2.14576734264E-06)); +#32498 = VECTOR('',#32499,1.); +#32499 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32500 = PLANE('',#32501); +#32501 = AXIS2_PLACEMENT_3D('',#32502,#32503,#32504); +#32502 = CARTESIAN_POINT('',(8.150000023842,3.54,-1.94311153833E-06)); +#32503 = DIRECTION('',(0.,-1.,0.)); +#32504 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32505 = ADVANCED_FACE('',(#32506),#32538,.T.); +#32506 = FACE_BOUND('',#32507,.T.); +#32507 = EDGE_LOOP('',(#32508,#32509,#32517,#32523,#32524,#32532)); +#32508 = ORIENTED_EDGE('',*,*,#28515,.F.); +#32509 = ORIENTED_EDGE('',*,*,#32510,.F.); +#32510 = EDGE_CURVE('',#32511,#28516,#32513,.T.); +#32511 = VERTEX_POINT('',#32512); +#32512 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#32513 = LINE('',#32514,#32515); +#32514 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#32515 = VECTOR('',#32516,1.); +#32516 = DIRECTION('',(-0.,-0.,-1.)); +#32517 = ORIENTED_EDGE('',*,*,#32518,.F.); +#32518 = EDGE_CURVE('',#30631,#32511,#32519,.T.); +#32519 = LINE('',#32520,#32521); +#32520 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#32521 = VECTOR('',#32522,1.); +#32522 = DIRECTION('',(-0.,-0.,-1.)); +#32523 = ORIENTED_EDGE('',*,*,#30630,.T.); +#32524 = ORIENTED_EDGE('',*,*,#32525,.T.); +#32525 = EDGE_CURVE('',#30623,#32526,#32528,.T.); +#32526 = VERTEX_POINT('',#32527); +#32527 = CARTESIAN_POINT('',(-9.,3.54,0.4)); +#32528 = LINE('',#32529,#32530); +#32529 = CARTESIAN_POINT('',(-9.,3.54,0.8)); +#32530 = VECTOR('',#32531,1.); +#32531 = DIRECTION('',(-0.,-0.,-1.)); +#32532 = ORIENTED_EDGE('',*,*,#32533,.T.); +#32533 = EDGE_CURVE('',#32526,#28508,#32534,.T.); +#32534 = LINE('',#32535,#32536); +#32535 = CARTESIAN_POINT('',(-9.,3.54,0.4)); +#32536 = VECTOR('',#32537,1.); +#32537 = DIRECTION('',(-0.,-0.,-1.)); +#32538 = PLANE('',#32539); +#32539 = AXIS2_PLACEMENT_3D('',#32540,#32541,#32542); +#32540 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#32541 = DIRECTION('',(-1.,0.,0.)); +#32542 = DIRECTION('',(0.,1.,0.)); +#32543 = ADVANCED_FACE('',(#32544),#32592,.T.); +#32544 = FACE_BOUND('',#32545,.T.); +#32545 = EDGE_LOOP('',(#32546,#32547,#32555,#32563,#32569,#32570,#32578, + #32586)); +#32546 = ORIENTED_EDGE('',*,*,#30163,.F.); +#32547 = ORIENTED_EDGE('',*,*,#32548,.F.); +#32548 = EDGE_CURVE('',#32549,#30164,#32551,.T.); +#32549 = VERTEX_POINT('',#32550); +#32550 = CARTESIAN_POINT('',(9.,3.54,0.4)); +#32551 = LINE('',#32552,#32553); +#32552 = CARTESIAN_POINT('',(9.,3.54,0.4)); +#32553 = VECTOR('',#32554,1.); +#32554 = DIRECTION('',(0.,0.,-1.)); +#32555 = ORIENTED_EDGE('',*,*,#32556,.F.); +#32556 = EDGE_CURVE('',#32557,#32549,#32559,.T.); +#32557 = VERTEX_POINT('',#32558); +#32558 = CARTESIAN_POINT('',(9.000000214576,3.54,0.799997854233)); +#32559 = LINE('',#32560,#32561); +#32560 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#32561 = VECTOR('',#32562,1.); +#32562 = DIRECTION('',(0.,0.,-1.)); +#32563 = ORIENTED_EDGE('',*,*,#32564,.F.); +#32564 = EDGE_CURVE('',#31735,#32557,#32565,.T.); +#32565 = LINE('',#32566,#32567); +#32566 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#32567 = VECTOR('',#32568,1.); +#32568 = DIRECTION('',(0.,0.,-1.)); +#32569 = ORIENTED_EDGE('',*,*,#31734,.T.); +#32570 = ORIENTED_EDGE('',*,*,#32571,.T.); +#32571 = EDGE_CURVE('',#31727,#32572,#32574,.T.); +#32572 = VERTEX_POINT('',#32573); +#32573 = CARTESIAN_POINT('',(9.000000214576,3.17,0.799997854233)); +#32574 = LINE('',#32575,#32576); +#32575 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#32576 = VECTOR('',#32577,1.); +#32577 = DIRECTION('',(0.,0.,-1.)); +#32578 = ORIENTED_EDGE('',*,*,#32579,.T.); +#32579 = EDGE_CURVE('',#32572,#32580,#32582,.T.); +#32580 = VERTEX_POINT('',#32581); +#32581 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#32582 = LINE('',#32583,#32584); +#32583 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#32584 = VECTOR('',#32585,1.); +#32585 = DIRECTION('',(0.,0.,-1.)); +#32586 = ORIENTED_EDGE('',*,*,#32587,.T.); +#32587 = EDGE_CURVE('',#32580,#30156,#32588,.T.); +#32588 = LINE('',#32589,#32590); +#32589 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#32590 = VECTOR('',#32591,1.); +#32591 = DIRECTION('',(0.,0.,-1.)); +#32592 = PLANE('',#32593); +#32593 = AXIS2_PLACEMENT_3D('',#32594,#32595,#32596); +#32594 = CARTESIAN_POINT('',(9.,12.75,0.)); +#32595 = DIRECTION('',(1.,0.,0.)); +#32596 = DIRECTION('',(0.,-1.,0.)); +#32597 = ADVANCED_FACE('',(#32598),#32628,.F.); +#32598 = FACE_BOUND('',#32599,.T.); +#32599 = EDGE_LOOP('',(#32600,#32611,#32617,#32618,#32619,#32620,#32621, + #32622)); +#32600 = ORIENTED_EDGE('',*,*,#32601,.T.); +#32601 = EDGE_CURVE('',#32602,#32604,#32606,.T.); +#32602 = VERTEX_POINT('',#32603); +#32603 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#32604 = VERTEX_POINT('',#32605); +#32605 = CARTESIAN_POINT('',(-9.,2.995,0.)); +#32606 = CIRCLE('',#32607,0.275); +#32607 = AXIS2_PLACEMENT_3D('',#32608,#32609,#32610); +#32608 = CARTESIAN_POINT('',(-9.,2.72,0.)); +#32609 = DIRECTION('',(0.,0.,1.)); +#32610 = DIRECTION('',(1.,0.,-0.)); +#32611 = ORIENTED_EDGE('',*,*,#32612,.F.); +#32612 = EDGE_CURVE('',#28516,#32604,#32613,.T.); +#32613 = LINE('',#32614,#32615); +#32614 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#32615 = VECTOR('',#32616,1.); +#32616 = DIRECTION('',(0.,-1.,0.)); +#32617 = ORIENTED_EDGE('',*,*,#28523,.T.); +#32618 = ORIENTED_EDGE('',*,*,#28531,.T.); +#32619 = ORIENTED_EDGE('',*,*,#28539,.T.); +#32620 = ORIENTED_EDGE('',*,*,#28547,.F.); +#32621 = ORIENTED_EDGE('',*,*,#28555,.T.); +#32622 = ORIENTED_EDGE('',*,*,#32623,.F.); +#32623 = EDGE_CURVE('',#32602,#28556,#32624,.T.); +#32624 = LINE('',#32625,#32626); +#32625 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#32626 = VECTOR('',#32627,1.); +#32627 = DIRECTION('',(0.,-1.,0.)); +#32628 = PLANE('',#32629); +#32629 = AXIS2_PLACEMENT_3D('',#32630,#32631,#32632); +#32630 = CARTESIAN_POINT('',(-8.571261896074,2.72,0.)); +#32631 = DIRECTION('',(0.,0.,1.)); +#32632 = DIRECTION('',(1.,0.,-0.)); +#32633 = ADVANCED_FACE('',(#32634),#32660,.T.); +#32634 = FACE_BOUND('',#32635,.F.); +#32635 = EDGE_LOOP('',(#32636,#32646,#32652,#32653,#32654)); +#32636 = ORIENTED_EDGE('',*,*,#32637,.F.); +#32637 = EDGE_CURVE('',#32638,#32640,#32642,.T.); +#32638 = VERTEX_POINT('',#32639); +#32639 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.145767343E-06)); +#32640 = VERTEX_POINT('',#32641); +#32641 = CARTESIAN_POINT('',(8.150000023842,3.17,-1.943111538E-06)); +#32642 = LINE('',#32643,#32644); +#32643 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#32644 = VECTOR('',#32645,1.); +#32645 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32646 = ORIENTED_EDGE('',*,*,#32647,.T.); +#32647 = EDGE_CURVE('',#32638,#30156,#32648,.T.); +#32648 = LINE('',#32649,#32650); +#32649 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#32650 = VECTOR('',#32651,1.); +#32651 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32652 = ORIENTED_EDGE('',*,*,#30155,.T.); +#32653 = ORIENTED_EDGE('',*,*,#30147,.T.); +#32654 = ORIENTED_EDGE('',*,*,#32655,.F.); +#32655 = EDGE_CURVE('',#32640,#30140,#32656,.T.); +#32656 = LINE('',#32657,#32658); +#32657 = CARTESIAN_POINT('',(8.150000023842,3.17,-1.94311153833E-06)); +#32658 = VECTOR('',#32659,1.); +#32659 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32660 = PLANE('',#32661); +#32661 = AXIS2_PLACEMENT_3D('',#32662,#32663,#32664); +#32662 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#32663 = DIRECTION('',(0.,1.,0.)); +#32664 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#32665 = ADVANCED_FACE('',(#32666),#32684,.T.); +#32666 = FACE_BOUND('',#32667,.F.); +#32667 = EDGE_LOOP('',(#32668,#32676,#32677,#32678)); +#32668 = ORIENTED_EDGE('',*,*,#32669,.F.); +#32669 = EDGE_CURVE('',#32640,#32670,#32672,.T.); +#32670 = VERTEX_POINT('',#32671); +#32671 = CARTESIAN_POINT('',(8.150000023842,2.27,-1.943111538E-06)); +#32672 = LINE('',#32673,#32674); +#32673 = CARTESIAN_POINT('',(8.150000023842,3.17,-1.94311153833E-06)); +#32674 = VECTOR('',#32675,1.); +#32675 = DIRECTION('',(0.,-1.,0.)); +#32676 = ORIENTED_EDGE('',*,*,#32655,.T.); +#32677 = ORIENTED_EDGE('',*,*,#30139,.T.); +#32678 = ORIENTED_EDGE('',*,*,#32679,.F.); +#32679 = EDGE_CURVE('',#32670,#30132,#32680,.T.); +#32680 = LINE('',#32681,#32682); +#32681 = CARTESIAN_POINT('',(8.150000023842,2.27,-1.94311153833E-06)); +#32682 = VECTOR('',#32683,1.); +#32683 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32684 = PLANE('',#32685); +#32685 = AXIS2_PLACEMENT_3D('',#32686,#32687,#32688); +#32686 = CARTESIAN_POINT('',(8.150000023842,3.17,-1.94311153833E-06)); +#32687 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32688 = DIRECTION('',(0.,1.,0.)); +#32689 = ADVANCED_FACE('',(#32690),#32709,.T.); +#32690 = FACE_BOUND('',#32691,.F.); +#32691 = EDGE_LOOP('',(#32692,#32700,#32701,#32702,#32703)); +#32692 = ORIENTED_EDGE('',*,*,#32693,.F.); +#32693 = EDGE_CURVE('',#32670,#32694,#32696,.T.); +#32694 = VERTEX_POINT('',#32695); +#32695 = CARTESIAN_POINT('',(9.000000023842,2.27,-2.145767343E-06)); +#32696 = LINE('',#32697,#32698); +#32697 = CARTESIAN_POINT('',(8.150000023842,2.27,-1.94311153833E-06)); +#32698 = VECTOR('',#32699,1.); +#32699 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#32700 = ORIENTED_EDGE('',*,*,#32679,.T.); +#32701 = ORIENTED_EDGE('',*,*,#30131,.F.); +#32702 = ORIENTED_EDGE('',*,*,#30123,.T.); +#32703 = ORIENTED_EDGE('',*,*,#32704,.F.); +#32704 = EDGE_CURVE('',#32694,#30116,#32705,.T.); +#32705 = LINE('',#32706,#32707); +#32706 = CARTESIAN_POINT('',(9.000000023842,2.27,-2.14576734264E-06)); +#32707 = VECTOR('',#32708,1.); +#32708 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32709 = PLANE('',#32710); +#32710 = AXIS2_PLACEMENT_3D('',#32711,#32712,#32713); +#32711 = CARTESIAN_POINT('',(8.150000023842,2.27,-1.94311153833E-06)); +#32712 = DIRECTION('',(0.,-1.,0.)); +#32713 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32714 = ADVANCED_FACE('',(#32715),#32747,.T.); +#32715 = FACE_BOUND('',#32716,.T.); +#32716 = EDGE_LOOP('',(#32717,#32718,#32726,#32732,#32733,#32741)); +#32717 = ORIENTED_EDGE('',*,*,#28563,.F.); +#32718 = ORIENTED_EDGE('',*,*,#32719,.F.); +#32719 = EDGE_CURVE('',#32720,#28564,#32722,.T.); +#32720 = VERTEX_POINT('',#32721); +#32721 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#32722 = LINE('',#32723,#32724); +#32723 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#32724 = VECTOR('',#32725,1.); +#32725 = DIRECTION('',(-0.,-0.,-1.)); +#32726 = ORIENTED_EDGE('',*,*,#32727,.F.); +#32727 = EDGE_CURVE('',#30663,#32720,#32728,.T.); +#32728 = LINE('',#32729,#32730); +#32729 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#32730 = VECTOR('',#32731,1.); +#32731 = DIRECTION('',(-0.,-0.,-1.)); +#32732 = ORIENTED_EDGE('',*,*,#30662,.T.); +#32733 = ORIENTED_EDGE('',*,*,#32734,.T.); +#32734 = EDGE_CURVE('',#30655,#32735,#32737,.T.); +#32735 = VERTEX_POINT('',#32736); +#32736 = CARTESIAN_POINT('',(-9.,2.27,0.4)); +#32737 = LINE('',#32738,#32739); +#32738 = CARTESIAN_POINT('',(-9.,2.27,0.8)); +#32739 = VECTOR('',#32740,1.); +#32740 = DIRECTION('',(-0.,-0.,-1.)); +#32741 = ORIENTED_EDGE('',*,*,#32742,.T.); +#32742 = EDGE_CURVE('',#32735,#28556,#32743,.T.); +#32743 = LINE('',#32744,#32745); +#32744 = CARTESIAN_POINT('',(-9.,2.27,0.4)); +#32745 = VECTOR('',#32746,1.); +#32746 = DIRECTION('',(-0.,-0.,-1.)); +#32747 = PLANE('',#32748); +#32748 = AXIS2_PLACEMENT_3D('',#32749,#32750,#32751); +#32749 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#32750 = DIRECTION('',(-1.,0.,0.)); +#32751 = DIRECTION('',(0.,1.,0.)); +#32752 = ADVANCED_FACE('',(#32753),#32801,.T.); +#32753 = FACE_BOUND('',#32754,.T.); +#32754 = EDGE_LOOP('',(#32755,#32756,#32764,#32772,#32778,#32779,#32787, + #32795)); +#32755 = ORIENTED_EDGE('',*,*,#30115,.F.); +#32756 = ORIENTED_EDGE('',*,*,#32757,.F.); +#32757 = EDGE_CURVE('',#32758,#30116,#32760,.T.); +#32758 = VERTEX_POINT('',#32759); +#32759 = CARTESIAN_POINT('',(9.,2.27,0.4)); +#32760 = LINE('',#32761,#32762); +#32761 = CARTESIAN_POINT('',(9.,2.27,0.4)); +#32762 = VECTOR('',#32763,1.); +#32763 = DIRECTION('',(0.,0.,-1.)); +#32764 = ORIENTED_EDGE('',*,*,#32765,.F.); +#32765 = EDGE_CURVE('',#32766,#32758,#32768,.T.); +#32766 = VERTEX_POINT('',#32767); +#32767 = CARTESIAN_POINT('',(9.000000214576,2.27,0.799997854233)); +#32768 = LINE('',#32769,#32770); +#32769 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#32770 = VECTOR('',#32771,1.); +#32771 = DIRECTION('',(0.,0.,-1.)); +#32772 = ORIENTED_EDGE('',*,*,#32773,.F.); +#32773 = EDGE_CURVE('',#31703,#32766,#32774,.T.); +#32774 = LINE('',#32775,#32776); +#32775 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#32776 = VECTOR('',#32777,1.); +#32777 = DIRECTION('',(0.,0.,-1.)); +#32778 = ORIENTED_EDGE('',*,*,#31702,.T.); +#32779 = ORIENTED_EDGE('',*,*,#32780,.T.); +#32780 = EDGE_CURVE('',#31695,#32781,#32783,.T.); +#32781 = VERTEX_POINT('',#32782); +#32782 = CARTESIAN_POINT('',(9.000000214576,1.9,0.799997854233)); +#32783 = LINE('',#32784,#32785); +#32784 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#32785 = VECTOR('',#32786,1.); +#32786 = DIRECTION('',(0.,0.,-1.)); +#32787 = ORIENTED_EDGE('',*,*,#32788,.T.); +#32788 = EDGE_CURVE('',#32781,#32789,#32791,.T.); +#32789 = VERTEX_POINT('',#32790); +#32790 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#32791 = LINE('',#32792,#32793); +#32792 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#32793 = VECTOR('',#32794,1.); +#32794 = DIRECTION('',(0.,0.,-1.)); +#32795 = ORIENTED_EDGE('',*,*,#32796,.T.); +#32796 = EDGE_CURVE('',#32789,#30108,#32797,.T.); +#32797 = LINE('',#32798,#32799); +#32798 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#32799 = VECTOR('',#32800,1.); +#32800 = DIRECTION('',(0.,0.,-1.)); +#32801 = PLANE('',#32802); +#32802 = AXIS2_PLACEMENT_3D('',#32803,#32804,#32805); +#32803 = CARTESIAN_POINT('',(9.,12.75,0.)); +#32804 = DIRECTION('',(1.,0.,0.)); +#32805 = DIRECTION('',(0.,-1.,0.)); +#32806 = ADVANCED_FACE('',(#32807),#32837,.F.); +#32807 = FACE_BOUND('',#32808,.T.); +#32808 = EDGE_LOOP('',(#32809,#32820,#32826,#32827,#32828,#32829,#32830, + #32831)); +#32809 = ORIENTED_EDGE('',*,*,#32810,.T.); +#32810 = EDGE_CURVE('',#32811,#32813,#32815,.T.); +#32811 = VERTEX_POINT('',#32812); +#32812 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#32813 = VERTEX_POINT('',#32814); +#32814 = CARTESIAN_POINT('',(-9.,1.725,0.)); +#32815 = CIRCLE('',#32816,0.275); +#32816 = AXIS2_PLACEMENT_3D('',#32817,#32818,#32819); +#32817 = CARTESIAN_POINT('',(-9.,1.45,0.)); +#32818 = DIRECTION('',(0.,0.,1.)); +#32819 = DIRECTION('',(1.,0.,-0.)); +#32820 = ORIENTED_EDGE('',*,*,#32821,.F.); +#32821 = EDGE_CURVE('',#28564,#32813,#32822,.T.); +#32822 = LINE('',#32823,#32824); +#32823 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#32824 = VECTOR('',#32825,1.); +#32825 = DIRECTION('',(0.,-1.,0.)); +#32826 = ORIENTED_EDGE('',*,*,#28571,.T.); +#32827 = ORIENTED_EDGE('',*,*,#28579,.T.); +#32828 = ORIENTED_EDGE('',*,*,#28587,.T.); +#32829 = ORIENTED_EDGE('',*,*,#28595,.F.); +#32830 = ORIENTED_EDGE('',*,*,#28603,.T.); +#32831 = ORIENTED_EDGE('',*,*,#32832,.F.); +#32832 = EDGE_CURVE('',#32811,#28604,#32833,.T.); +#32833 = LINE('',#32834,#32835); +#32834 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#32835 = VECTOR('',#32836,1.); +#32836 = DIRECTION('',(0.,-1.,0.)); +#32837 = PLANE('',#32838); +#32838 = AXIS2_PLACEMENT_3D('',#32839,#32840,#32841); +#32839 = CARTESIAN_POINT('',(-8.571261896074,1.45,0.)); +#32840 = DIRECTION('',(0.,0.,1.)); +#32841 = DIRECTION('',(1.,0.,-0.)); +#32842 = ADVANCED_FACE('',(#32843),#32869,.T.); +#32843 = FACE_BOUND('',#32844,.F.); +#32844 = EDGE_LOOP('',(#32845,#32855,#32861,#32862,#32863)); +#32845 = ORIENTED_EDGE('',*,*,#32846,.F.); +#32846 = EDGE_CURVE('',#32847,#32849,#32851,.T.); +#32847 = VERTEX_POINT('',#32848); +#32848 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.145767343E-06)); +#32849 = VERTEX_POINT('',#32850); +#32850 = CARTESIAN_POINT('',(8.150000023842,1.9,-1.943111538E-06)); +#32851 = LINE('',#32852,#32853); +#32852 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#32853 = VECTOR('',#32854,1.); +#32854 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32855 = ORIENTED_EDGE('',*,*,#32856,.T.); +#32856 = EDGE_CURVE('',#32847,#30108,#32857,.T.); +#32857 = LINE('',#32858,#32859); +#32858 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#32859 = VECTOR('',#32860,1.); +#32860 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32861 = ORIENTED_EDGE('',*,*,#30107,.T.); +#32862 = ORIENTED_EDGE('',*,*,#30099,.T.); +#32863 = ORIENTED_EDGE('',*,*,#32864,.F.); +#32864 = EDGE_CURVE('',#32849,#30092,#32865,.T.); +#32865 = LINE('',#32866,#32867); +#32866 = CARTESIAN_POINT('',(8.150000023842,1.9,-1.94311153833E-06)); +#32867 = VECTOR('',#32868,1.); +#32868 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32869 = PLANE('',#32870); +#32870 = AXIS2_PLACEMENT_3D('',#32871,#32872,#32873); +#32871 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#32872 = DIRECTION('',(0.,1.,0.)); +#32873 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#32874 = ADVANCED_FACE('',(#32875),#32893,.T.); +#32875 = FACE_BOUND('',#32876,.F.); +#32876 = EDGE_LOOP('',(#32877,#32885,#32886,#32887)); +#32877 = ORIENTED_EDGE('',*,*,#32878,.F.); +#32878 = EDGE_CURVE('',#32849,#32879,#32881,.T.); +#32879 = VERTEX_POINT('',#32880); +#32880 = CARTESIAN_POINT('',(8.150000023842,1.,-1.943111538E-06)); +#32881 = LINE('',#32882,#32883); +#32882 = CARTESIAN_POINT('',(8.150000023842,1.9,-1.94311153833E-06)); +#32883 = VECTOR('',#32884,1.); +#32884 = DIRECTION('',(0.,-1.,0.)); +#32885 = ORIENTED_EDGE('',*,*,#32864,.T.); +#32886 = ORIENTED_EDGE('',*,*,#30091,.T.); +#32887 = ORIENTED_EDGE('',*,*,#32888,.F.); +#32888 = EDGE_CURVE('',#32879,#30084,#32889,.T.); +#32889 = LINE('',#32890,#32891); +#32890 = CARTESIAN_POINT('',(8.150000023842,1.,-1.94311153833E-06)); +#32891 = VECTOR('',#32892,1.); +#32892 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32893 = PLANE('',#32894); +#32894 = AXIS2_PLACEMENT_3D('',#32895,#32896,#32897); +#32895 = CARTESIAN_POINT('',(8.150000023842,1.9,-1.94311153833E-06)); +#32896 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32897 = DIRECTION('',(0.,1.,0.)); +#32898 = ADVANCED_FACE('',(#32899),#32918,.T.); +#32899 = FACE_BOUND('',#32900,.F.); +#32900 = EDGE_LOOP('',(#32901,#32909,#32910,#32911,#32912)); +#32901 = ORIENTED_EDGE('',*,*,#32902,.F.); +#32902 = EDGE_CURVE('',#32879,#32903,#32905,.T.); +#32903 = VERTEX_POINT('',#32904); +#32904 = CARTESIAN_POINT('',(9.000000023842,1.,-2.145767343E-06)); +#32905 = LINE('',#32906,#32907); +#32906 = CARTESIAN_POINT('',(8.150000023842,1.,-1.94311153833E-06)); +#32907 = VECTOR('',#32908,1.); +#32908 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#32909 = ORIENTED_EDGE('',*,*,#32888,.T.); +#32910 = ORIENTED_EDGE('',*,*,#30083,.F.); +#32911 = ORIENTED_EDGE('',*,*,#30075,.T.); +#32912 = ORIENTED_EDGE('',*,*,#32913,.F.); +#32913 = EDGE_CURVE('',#32903,#30068,#32914,.T.); +#32914 = LINE('',#32915,#32916); +#32915 = CARTESIAN_POINT('',(9.000000023842,1.,-2.14576734264E-06)); +#32916 = VECTOR('',#32917,1.); +#32917 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#32918 = PLANE('',#32919); +#32919 = AXIS2_PLACEMENT_3D('',#32920,#32921,#32922); +#32920 = CARTESIAN_POINT('',(8.150000023842,1.,-1.94311153833E-06)); +#32921 = DIRECTION('',(0.,-1.,0.)); +#32922 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#32923 = ADVANCED_FACE('',(#32924),#32956,.T.); +#32924 = FACE_BOUND('',#32925,.T.); +#32925 = EDGE_LOOP('',(#32926,#32927,#32935,#32941,#32942,#32950)); +#32926 = ORIENTED_EDGE('',*,*,#28611,.F.); +#32927 = ORIENTED_EDGE('',*,*,#32928,.F.); +#32928 = EDGE_CURVE('',#32929,#28612,#32931,.T.); +#32929 = VERTEX_POINT('',#32930); +#32930 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#32931 = LINE('',#32932,#32933); +#32932 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#32933 = VECTOR('',#32934,1.); +#32934 = DIRECTION('',(-0.,-0.,-1.)); +#32935 = ORIENTED_EDGE('',*,*,#32936,.F.); +#32936 = EDGE_CURVE('',#30695,#32929,#32937,.T.); +#32937 = LINE('',#32938,#32939); +#32938 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#32939 = VECTOR('',#32940,1.); +#32940 = DIRECTION('',(-0.,-0.,-1.)); +#32941 = ORIENTED_EDGE('',*,*,#30694,.T.); +#32942 = ORIENTED_EDGE('',*,*,#32943,.T.); +#32943 = EDGE_CURVE('',#30687,#32944,#32946,.T.); +#32944 = VERTEX_POINT('',#32945); +#32945 = CARTESIAN_POINT('',(-9.,1.,0.4)); +#32946 = LINE('',#32947,#32948); +#32947 = CARTESIAN_POINT('',(-9.,1.,0.8)); +#32948 = VECTOR('',#32949,1.); +#32949 = DIRECTION('',(-0.,-0.,-1.)); +#32950 = ORIENTED_EDGE('',*,*,#32951,.T.); +#32951 = EDGE_CURVE('',#32944,#28604,#32952,.T.); +#32952 = LINE('',#32953,#32954); +#32953 = CARTESIAN_POINT('',(-9.,1.,0.4)); +#32954 = VECTOR('',#32955,1.); +#32955 = DIRECTION('',(-0.,-0.,-1.)); +#32956 = PLANE('',#32957); +#32957 = AXIS2_PLACEMENT_3D('',#32958,#32959,#32960); +#32958 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#32959 = DIRECTION('',(-1.,0.,0.)); +#32960 = DIRECTION('',(0.,1.,0.)); +#32961 = ADVANCED_FACE('',(#32962),#33010,.T.); +#32962 = FACE_BOUND('',#32963,.T.); +#32963 = EDGE_LOOP('',(#32964,#32965,#32973,#32981,#32987,#32988,#32996, + #33004)); +#32964 = ORIENTED_EDGE('',*,*,#30067,.F.); +#32965 = ORIENTED_EDGE('',*,*,#32966,.F.); +#32966 = EDGE_CURVE('',#32967,#30068,#32969,.T.); +#32967 = VERTEX_POINT('',#32968); +#32968 = CARTESIAN_POINT('',(9.,1.,0.4)); +#32969 = LINE('',#32970,#32971); +#32970 = CARTESIAN_POINT('',(9.,1.,0.4)); +#32971 = VECTOR('',#32972,1.); +#32972 = DIRECTION('',(0.,0.,-1.)); +#32973 = ORIENTED_EDGE('',*,*,#32974,.F.); +#32974 = EDGE_CURVE('',#32975,#32967,#32977,.T.); +#32975 = VERTEX_POINT('',#32976); +#32976 = CARTESIAN_POINT('',(9.000000214576,1.,0.799997854233)); +#32977 = LINE('',#32978,#32979); +#32978 = CARTESIAN_POINT('',(9.,1.,0.8)); +#32979 = VECTOR('',#32980,1.); +#32980 = DIRECTION('',(0.,0.,-1.)); +#32981 = ORIENTED_EDGE('',*,*,#32982,.F.); +#32982 = EDGE_CURVE('',#31671,#32975,#32983,.T.); +#32983 = LINE('',#32984,#32985); +#32984 = CARTESIAN_POINT('',(9.,1.,0.8)); +#32985 = VECTOR('',#32986,1.); +#32986 = DIRECTION('',(0.,0.,-1.)); +#32987 = ORIENTED_EDGE('',*,*,#31670,.T.); +#32988 = ORIENTED_EDGE('',*,*,#32989,.T.); +#32989 = EDGE_CURVE('',#31663,#32990,#32992,.T.); +#32990 = VERTEX_POINT('',#32991); +#32991 = CARTESIAN_POINT('',(9.000000214576,0.63,0.799997854233)); +#32992 = LINE('',#32993,#32994); +#32993 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#32994 = VECTOR('',#32995,1.); +#32995 = DIRECTION('',(0.,0.,-1.)); +#32996 = ORIENTED_EDGE('',*,*,#32997,.T.); +#32997 = EDGE_CURVE('',#32990,#32998,#33000,.T.); +#32998 = VERTEX_POINT('',#32999); +#32999 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#33000 = LINE('',#33001,#33002); +#33001 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#33002 = VECTOR('',#33003,1.); +#33003 = DIRECTION('',(0.,0.,-1.)); +#33004 = ORIENTED_EDGE('',*,*,#33005,.T.); +#33005 = EDGE_CURVE('',#32998,#30060,#33006,.T.); +#33006 = LINE('',#33007,#33008); +#33007 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#33008 = VECTOR('',#33009,1.); +#33009 = DIRECTION('',(0.,0.,-1.)); +#33010 = PLANE('',#33011); +#33011 = AXIS2_PLACEMENT_3D('',#33012,#33013,#33014); +#33012 = CARTESIAN_POINT('',(9.,12.75,0.)); +#33013 = DIRECTION('',(1.,0.,0.)); +#33014 = DIRECTION('',(0.,-1.,0.)); +#33015 = ADVANCED_FACE('',(#33016),#33046,.F.); +#33016 = FACE_BOUND('',#33017,.T.); +#33017 = EDGE_LOOP('',(#33018,#33029,#33035,#33036,#33037,#33038,#33039, + #33040)); +#33018 = ORIENTED_EDGE('',*,*,#33019,.T.); +#33019 = EDGE_CURVE('',#33020,#33022,#33024,.T.); +#33020 = VERTEX_POINT('',#33021); +#33021 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#33022 = VERTEX_POINT('',#33023); +#33023 = CARTESIAN_POINT('',(-9.,0.455,0.)); +#33024 = CIRCLE('',#33025,0.275); +#33025 = AXIS2_PLACEMENT_3D('',#33026,#33027,#33028); +#33026 = CARTESIAN_POINT('',(-9.,0.18,0.)); +#33027 = DIRECTION('',(0.,0.,1.)); +#33028 = DIRECTION('',(1.,0.,-0.)); +#33029 = ORIENTED_EDGE('',*,*,#33030,.F.); +#33030 = EDGE_CURVE('',#28612,#33022,#33031,.T.); +#33031 = LINE('',#33032,#33033); +#33032 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#33033 = VECTOR('',#33034,1.); +#33034 = DIRECTION('',(0.,-1.,0.)); +#33035 = ORIENTED_EDGE('',*,*,#28619,.T.); +#33036 = ORIENTED_EDGE('',*,*,#28627,.T.); +#33037 = ORIENTED_EDGE('',*,*,#28635,.T.); +#33038 = ORIENTED_EDGE('',*,*,#28643,.F.); +#33039 = ORIENTED_EDGE('',*,*,#28651,.T.); +#33040 = ORIENTED_EDGE('',*,*,#33041,.F.); +#33041 = EDGE_CURVE('',#33020,#28652,#33042,.T.); +#33042 = LINE('',#33043,#33044); +#33043 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#33044 = VECTOR('',#33045,1.); +#33045 = DIRECTION('',(0.,-1.,0.)); +#33046 = PLANE('',#33047); +#33047 = AXIS2_PLACEMENT_3D('',#33048,#33049,#33050); +#33048 = CARTESIAN_POINT('',(-8.571261896074,0.18,0.)); +#33049 = DIRECTION('',(0.,0.,1.)); +#33050 = DIRECTION('',(1.,0.,-0.)); +#33051 = ADVANCED_FACE('',(#33052),#33078,.T.); +#33052 = FACE_BOUND('',#33053,.F.); +#33053 = EDGE_LOOP('',(#33054,#33064,#33070,#33071,#33072)); +#33054 = ORIENTED_EDGE('',*,*,#33055,.F.); +#33055 = EDGE_CURVE('',#33056,#33058,#33060,.T.); +#33056 = VERTEX_POINT('',#33057); +#33057 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.145767343E-06)); +#33058 = VERTEX_POINT('',#33059); +#33059 = CARTESIAN_POINT('',(8.150000023842,0.63,-1.943111538E-06)); +#33060 = LINE('',#33061,#33062); +#33061 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#33062 = VECTOR('',#33063,1.); +#33063 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33064 = ORIENTED_EDGE('',*,*,#33065,.T.); +#33065 = EDGE_CURVE('',#33056,#30060,#33066,.T.); +#33066 = LINE('',#33067,#33068); +#33067 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#33068 = VECTOR('',#33069,1.); +#33069 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33070 = ORIENTED_EDGE('',*,*,#30059,.T.); +#33071 = ORIENTED_EDGE('',*,*,#30051,.T.); +#33072 = ORIENTED_EDGE('',*,*,#33073,.F.); +#33073 = EDGE_CURVE('',#33058,#30044,#33074,.T.); +#33074 = LINE('',#33075,#33076); +#33075 = CARTESIAN_POINT('',(8.150000023842,0.63,-1.94311153833E-06)); +#33076 = VECTOR('',#33077,1.); +#33077 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33078 = PLANE('',#33079); +#33079 = AXIS2_PLACEMENT_3D('',#33080,#33081,#33082); +#33080 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#33081 = DIRECTION('',(0.,1.,0.)); +#33082 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33083 = ADVANCED_FACE('',(#33084),#33102,.T.); +#33084 = FACE_BOUND('',#33085,.F.); +#33085 = EDGE_LOOP('',(#33086,#33094,#33095,#33096)); +#33086 = ORIENTED_EDGE('',*,*,#33087,.F.); +#33087 = EDGE_CURVE('',#33058,#33088,#33090,.T.); +#33088 = VERTEX_POINT('',#33089); +#33089 = CARTESIAN_POINT('',(8.150000023842,-0.27,-1.943111538E-06)); +#33090 = LINE('',#33091,#33092); +#33091 = CARTESIAN_POINT('',(8.150000023842,0.63,-1.94311153833E-06)); +#33092 = VECTOR('',#33093,1.); +#33093 = DIRECTION('',(0.,-1.,0.)); +#33094 = ORIENTED_EDGE('',*,*,#33073,.T.); +#33095 = ORIENTED_EDGE('',*,*,#30043,.T.); +#33096 = ORIENTED_EDGE('',*,*,#33097,.F.); +#33097 = EDGE_CURVE('',#33088,#30036,#33098,.T.); +#33098 = LINE('',#33099,#33100); +#33099 = CARTESIAN_POINT('',(8.150000023842,-0.27,-1.94311153833E-06)); +#33100 = VECTOR('',#33101,1.); +#33101 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33102 = PLANE('',#33103); +#33103 = AXIS2_PLACEMENT_3D('',#33104,#33105,#33106); +#33104 = CARTESIAN_POINT('',(8.150000023842,0.63,-1.94311153833E-06)); +#33105 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33106 = DIRECTION('',(0.,1.,0.)); +#33107 = ADVANCED_FACE('',(#33108),#33127,.T.); +#33108 = FACE_BOUND('',#33109,.F.); +#33109 = EDGE_LOOP('',(#33110,#33118,#33119,#33120,#33121)); +#33110 = ORIENTED_EDGE('',*,*,#33111,.F.); +#33111 = EDGE_CURVE('',#33088,#33112,#33114,.T.); +#33112 = VERTEX_POINT('',#33113); +#33113 = CARTESIAN_POINT('',(9.000000023842,-0.27,-2.145767343E-06)); +#33114 = LINE('',#33115,#33116); +#33115 = CARTESIAN_POINT('',(8.150000023842,-0.27,-1.94311153833E-06)); +#33116 = VECTOR('',#33117,1.); +#33117 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33118 = ORIENTED_EDGE('',*,*,#33097,.T.); +#33119 = ORIENTED_EDGE('',*,*,#30035,.F.); +#33120 = ORIENTED_EDGE('',*,*,#30027,.T.); +#33121 = ORIENTED_EDGE('',*,*,#33122,.F.); +#33122 = EDGE_CURVE('',#33112,#30020,#33123,.T.); +#33123 = LINE('',#33124,#33125); +#33124 = CARTESIAN_POINT('',(9.000000023842,-0.27,-2.14576734264E-06)); +#33125 = VECTOR('',#33126,1.); +#33126 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33127 = PLANE('',#33128); +#33128 = AXIS2_PLACEMENT_3D('',#33129,#33130,#33131); +#33129 = CARTESIAN_POINT('',(8.150000023842,-0.27,-1.94311153833E-06)); +#33130 = DIRECTION('',(0.,-1.,0.)); +#33131 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33132 = ADVANCED_FACE('',(#33133),#33165,.T.); +#33133 = FACE_BOUND('',#33134,.T.); +#33134 = EDGE_LOOP('',(#33135,#33136,#33144,#33150,#33151,#33159)); +#33135 = ORIENTED_EDGE('',*,*,#28659,.F.); +#33136 = ORIENTED_EDGE('',*,*,#33137,.F.); +#33137 = EDGE_CURVE('',#33138,#28660,#33140,.T.); +#33138 = VERTEX_POINT('',#33139); +#33139 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#33140 = LINE('',#33141,#33142); +#33141 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#33142 = VECTOR('',#33143,1.); +#33143 = DIRECTION('',(-0.,-0.,-1.)); +#33144 = ORIENTED_EDGE('',*,*,#33145,.F.); +#33145 = EDGE_CURVE('',#30727,#33138,#33146,.T.); +#33146 = LINE('',#33147,#33148); +#33147 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#33148 = VECTOR('',#33149,1.); +#33149 = DIRECTION('',(-0.,-0.,-1.)); +#33150 = ORIENTED_EDGE('',*,*,#30726,.T.); +#33151 = ORIENTED_EDGE('',*,*,#33152,.T.); +#33152 = EDGE_CURVE('',#30719,#33153,#33155,.T.); +#33153 = VERTEX_POINT('',#33154); +#33154 = CARTESIAN_POINT('',(-9.,-0.27,0.4)); +#33155 = LINE('',#33156,#33157); +#33156 = CARTESIAN_POINT('',(-9.,-0.27,0.8)); +#33157 = VECTOR('',#33158,1.); +#33158 = DIRECTION('',(-0.,-0.,-1.)); +#33159 = ORIENTED_EDGE('',*,*,#33160,.T.); +#33160 = EDGE_CURVE('',#33153,#28652,#33161,.T.); +#33161 = LINE('',#33162,#33163); +#33162 = CARTESIAN_POINT('',(-9.,-0.27,0.4)); +#33163 = VECTOR('',#33164,1.); +#33164 = DIRECTION('',(-0.,-0.,-1.)); +#33165 = PLANE('',#33166); +#33166 = AXIS2_PLACEMENT_3D('',#33167,#33168,#33169); +#33167 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#33168 = DIRECTION('',(-1.,0.,0.)); +#33169 = DIRECTION('',(0.,1.,0.)); +#33170 = ADVANCED_FACE('',(#33171),#33219,.T.); +#33171 = FACE_BOUND('',#33172,.T.); +#33172 = EDGE_LOOP('',(#33173,#33174,#33182,#33190,#33196,#33197,#33205, + #33213)); +#33173 = ORIENTED_EDGE('',*,*,#30019,.F.); +#33174 = ORIENTED_EDGE('',*,*,#33175,.F.); +#33175 = EDGE_CURVE('',#33176,#30020,#33178,.T.); +#33176 = VERTEX_POINT('',#33177); +#33177 = CARTESIAN_POINT('',(9.,-0.27,0.4)); +#33178 = LINE('',#33179,#33180); +#33179 = CARTESIAN_POINT('',(9.,-0.27,0.4)); +#33180 = VECTOR('',#33181,1.); +#33181 = DIRECTION('',(0.,0.,-1.)); +#33182 = ORIENTED_EDGE('',*,*,#33183,.F.); +#33183 = EDGE_CURVE('',#33184,#33176,#33186,.T.); +#33184 = VERTEX_POINT('',#33185); +#33185 = CARTESIAN_POINT('',(9.000000214576,-0.27,0.799997854233)); +#33186 = LINE('',#33187,#33188); +#33187 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#33188 = VECTOR('',#33189,1.); +#33189 = DIRECTION('',(0.,0.,-1.)); +#33190 = ORIENTED_EDGE('',*,*,#33191,.F.); +#33191 = EDGE_CURVE('',#31639,#33184,#33192,.T.); +#33192 = LINE('',#33193,#33194); +#33193 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#33194 = VECTOR('',#33195,1.); +#33195 = DIRECTION('',(0.,0.,-1.)); +#33196 = ORIENTED_EDGE('',*,*,#31638,.T.); +#33197 = ORIENTED_EDGE('',*,*,#33198,.T.); +#33198 = EDGE_CURVE('',#31631,#33199,#33201,.T.); +#33199 = VERTEX_POINT('',#33200); +#33200 = CARTESIAN_POINT('',(9.000000214576,-0.64,0.799997854233)); +#33201 = LINE('',#33202,#33203); +#33202 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#33203 = VECTOR('',#33204,1.); +#33204 = DIRECTION('',(0.,0.,-1.)); +#33205 = ORIENTED_EDGE('',*,*,#33206,.T.); +#33206 = EDGE_CURVE('',#33199,#33207,#33209,.T.); +#33207 = VERTEX_POINT('',#33208); +#33208 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#33209 = LINE('',#33210,#33211); +#33210 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#33211 = VECTOR('',#33212,1.); +#33212 = DIRECTION('',(0.,0.,-1.)); +#33213 = ORIENTED_EDGE('',*,*,#33214,.T.); +#33214 = EDGE_CURVE('',#33207,#30012,#33215,.T.); +#33215 = LINE('',#33216,#33217); +#33216 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#33217 = VECTOR('',#33218,1.); +#33218 = DIRECTION('',(0.,0.,-1.)); +#33219 = PLANE('',#33220); +#33220 = AXIS2_PLACEMENT_3D('',#33221,#33222,#33223); +#33221 = CARTESIAN_POINT('',(9.,12.75,0.)); +#33222 = DIRECTION('',(1.,0.,0.)); +#33223 = DIRECTION('',(0.,-1.,0.)); +#33224 = ADVANCED_FACE('',(#33225),#33255,.F.); +#33225 = FACE_BOUND('',#33226,.T.); +#33226 = EDGE_LOOP('',(#33227,#33238,#33244,#33245,#33246,#33247,#33248, + #33249)); +#33227 = ORIENTED_EDGE('',*,*,#33228,.T.); +#33228 = EDGE_CURVE('',#33229,#33231,#33233,.T.); +#33229 = VERTEX_POINT('',#33230); +#33230 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#33231 = VERTEX_POINT('',#33232); +#33232 = CARTESIAN_POINT('',(-9.,-0.815,0.)); +#33233 = CIRCLE('',#33234,0.275); +#33234 = AXIS2_PLACEMENT_3D('',#33235,#33236,#33237); +#33235 = CARTESIAN_POINT('',(-9.,-1.09,0.)); +#33236 = DIRECTION('',(0.,0.,1.)); +#33237 = DIRECTION('',(1.,0.,-0.)); +#33238 = ORIENTED_EDGE('',*,*,#33239,.F.); +#33239 = EDGE_CURVE('',#28660,#33231,#33240,.T.); +#33240 = LINE('',#33241,#33242); +#33241 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#33242 = VECTOR('',#33243,1.); +#33243 = DIRECTION('',(0.,-1.,0.)); +#33244 = ORIENTED_EDGE('',*,*,#28667,.T.); +#33245 = ORIENTED_EDGE('',*,*,#28675,.T.); +#33246 = ORIENTED_EDGE('',*,*,#28683,.T.); +#33247 = ORIENTED_EDGE('',*,*,#28691,.F.); +#33248 = ORIENTED_EDGE('',*,*,#28699,.T.); +#33249 = ORIENTED_EDGE('',*,*,#33250,.F.); +#33250 = EDGE_CURVE('',#33229,#28700,#33251,.T.); +#33251 = LINE('',#33252,#33253); +#33252 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#33253 = VECTOR('',#33254,1.); +#33254 = DIRECTION('',(0.,-1.,0.)); +#33255 = PLANE('',#33256); +#33256 = AXIS2_PLACEMENT_3D('',#33257,#33258,#33259); +#33257 = CARTESIAN_POINT('',(-8.571261896074,-1.09,0.)); +#33258 = DIRECTION('',(0.,0.,1.)); +#33259 = DIRECTION('',(1.,0.,-0.)); +#33260 = ADVANCED_FACE('',(#33261),#33287,.T.); +#33261 = FACE_BOUND('',#33262,.F.); +#33262 = EDGE_LOOP('',(#33263,#33273,#33279,#33280,#33281)); +#33263 = ORIENTED_EDGE('',*,*,#33264,.F.); +#33264 = EDGE_CURVE('',#33265,#33267,#33269,.T.); +#33265 = VERTEX_POINT('',#33266); +#33266 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.145767343E-06)); +#33267 = VERTEX_POINT('',#33268); +#33268 = CARTESIAN_POINT('',(8.150000023842,-0.64,-1.943111538E-06)); +#33269 = LINE('',#33270,#33271); +#33270 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#33271 = VECTOR('',#33272,1.); +#33272 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33273 = ORIENTED_EDGE('',*,*,#33274,.T.); +#33274 = EDGE_CURVE('',#33265,#30012,#33275,.T.); +#33275 = LINE('',#33276,#33277); +#33276 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#33277 = VECTOR('',#33278,1.); +#33278 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33279 = ORIENTED_EDGE('',*,*,#30011,.T.); +#33280 = ORIENTED_EDGE('',*,*,#30003,.T.); +#33281 = ORIENTED_EDGE('',*,*,#33282,.F.); +#33282 = EDGE_CURVE('',#33267,#29996,#33283,.T.); +#33283 = LINE('',#33284,#33285); +#33284 = CARTESIAN_POINT('',(8.150000023842,-0.64,-1.94311153833E-06)); +#33285 = VECTOR('',#33286,1.); +#33286 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33287 = PLANE('',#33288); +#33288 = AXIS2_PLACEMENT_3D('',#33289,#33290,#33291); +#33289 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#33290 = DIRECTION('',(0.,1.,0.)); +#33291 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33292 = ADVANCED_FACE('',(#33293),#33311,.T.); +#33293 = FACE_BOUND('',#33294,.F.); +#33294 = EDGE_LOOP('',(#33295,#33303,#33304,#33305)); +#33295 = ORIENTED_EDGE('',*,*,#33296,.F.); +#33296 = EDGE_CURVE('',#33267,#33297,#33299,.T.); +#33297 = VERTEX_POINT('',#33298); +#33298 = CARTESIAN_POINT('',(8.150000023842,-1.54,-1.943111538E-06)); +#33299 = LINE('',#33300,#33301); +#33300 = CARTESIAN_POINT('',(8.150000023842,-0.64,-1.94311153833E-06)); +#33301 = VECTOR('',#33302,1.); +#33302 = DIRECTION('',(0.,-1.,0.)); +#33303 = ORIENTED_EDGE('',*,*,#33282,.T.); +#33304 = ORIENTED_EDGE('',*,*,#29995,.T.); +#33305 = ORIENTED_EDGE('',*,*,#33306,.F.); +#33306 = EDGE_CURVE('',#33297,#29988,#33307,.T.); +#33307 = LINE('',#33308,#33309); +#33308 = CARTESIAN_POINT('',(8.150000023842,-1.54,-1.94311153833E-06)); +#33309 = VECTOR('',#33310,1.); +#33310 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33311 = PLANE('',#33312); +#33312 = AXIS2_PLACEMENT_3D('',#33313,#33314,#33315); +#33313 = CARTESIAN_POINT('',(8.150000023842,-0.64,-1.94311153833E-06)); +#33314 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33315 = DIRECTION('',(0.,1.,0.)); +#33316 = ADVANCED_FACE('',(#33317),#33336,.T.); +#33317 = FACE_BOUND('',#33318,.F.); +#33318 = EDGE_LOOP('',(#33319,#33327,#33328,#33329,#33330)); +#33319 = ORIENTED_EDGE('',*,*,#33320,.F.); +#33320 = EDGE_CURVE('',#33297,#33321,#33323,.T.); +#33321 = VERTEX_POINT('',#33322); +#33322 = CARTESIAN_POINT('',(9.000000023842,-1.54,-2.145767343E-06)); +#33323 = LINE('',#33324,#33325); +#33324 = CARTESIAN_POINT('',(8.150000023842,-1.54,-1.94311153833E-06)); +#33325 = VECTOR('',#33326,1.); +#33326 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33327 = ORIENTED_EDGE('',*,*,#33306,.T.); +#33328 = ORIENTED_EDGE('',*,*,#29987,.F.); +#33329 = ORIENTED_EDGE('',*,*,#29979,.T.); +#33330 = ORIENTED_EDGE('',*,*,#33331,.F.); +#33331 = EDGE_CURVE('',#33321,#29972,#33332,.T.); +#33332 = LINE('',#33333,#33334); +#33333 = CARTESIAN_POINT('',(9.000000023842,-1.54,-2.14576734264E-06)); +#33334 = VECTOR('',#33335,1.); +#33335 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33336 = PLANE('',#33337); +#33337 = AXIS2_PLACEMENT_3D('',#33338,#33339,#33340); +#33338 = CARTESIAN_POINT('',(8.150000023842,-1.54,-1.94311153833E-06)); +#33339 = DIRECTION('',(0.,-1.,0.)); +#33340 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33341 = ADVANCED_FACE('',(#33342),#33374,.T.); +#33342 = FACE_BOUND('',#33343,.T.); +#33343 = EDGE_LOOP('',(#33344,#33345,#33353,#33359,#33360,#33368)); +#33344 = ORIENTED_EDGE('',*,*,#28707,.F.); +#33345 = ORIENTED_EDGE('',*,*,#33346,.F.); +#33346 = EDGE_CURVE('',#33347,#28708,#33349,.T.); +#33347 = VERTEX_POINT('',#33348); +#33348 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#33349 = LINE('',#33350,#33351); +#33350 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#33351 = VECTOR('',#33352,1.); +#33352 = DIRECTION('',(-0.,-0.,-1.)); +#33353 = ORIENTED_EDGE('',*,*,#33354,.F.); +#33354 = EDGE_CURVE('',#30759,#33347,#33355,.T.); +#33355 = LINE('',#33356,#33357); +#33356 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#33357 = VECTOR('',#33358,1.); +#33358 = DIRECTION('',(-0.,-0.,-1.)); +#33359 = ORIENTED_EDGE('',*,*,#30758,.T.); +#33360 = ORIENTED_EDGE('',*,*,#33361,.T.); +#33361 = EDGE_CURVE('',#30751,#33362,#33364,.T.); +#33362 = VERTEX_POINT('',#33363); +#33363 = CARTESIAN_POINT('',(-9.,-1.54,0.4)); +#33364 = LINE('',#33365,#33366); +#33365 = CARTESIAN_POINT('',(-9.,-1.54,0.8)); +#33366 = VECTOR('',#33367,1.); +#33367 = DIRECTION('',(-0.,-0.,-1.)); +#33368 = ORIENTED_EDGE('',*,*,#33369,.T.); +#33369 = EDGE_CURVE('',#33362,#28700,#33370,.T.); +#33370 = LINE('',#33371,#33372); +#33371 = CARTESIAN_POINT('',(-9.,-1.54,0.4)); +#33372 = VECTOR('',#33373,1.); +#33373 = DIRECTION('',(-0.,-0.,-1.)); +#33374 = PLANE('',#33375); +#33375 = AXIS2_PLACEMENT_3D('',#33376,#33377,#33378); +#33376 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#33377 = DIRECTION('',(-1.,0.,0.)); +#33378 = DIRECTION('',(0.,1.,0.)); +#33379 = ADVANCED_FACE('',(#33380),#33428,.T.); +#33380 = FACE_BOUND('',#33381,.T.); +#33381 = EDGE_LOOP('',(#33382,#33383,#33391,#33399,#33405,#33406,#33414, + #33422)); +#33382 = ORIENTED_EDGE('',*,*,#29971,.F.); +#33383 = ORIENTED_EDGE('',*,*,#33384,.F.); +#33384 = EDGE_CURVE('',#33385,#29972,#33387,.T.); +#33385 = VERTEX_POINT('',#33386); +#33386 = CARTESIAN_POINT('',(9.,-1.54,0.4)); +#33387 = LINE('',#33388,#33389); +#33388 = CARTESIAN_POINT('',(9.,-1.54,0.4)); +#33389 = VECTOR('',#33390,1.); +#33390 = DIRECTION('',(0.,0.,-1.)); +#33391 = ORIENTED_EDGE('',*,*,#33392,.F.); +#33392 = EDGE_CURVE('',#33393,#33385,#33395,.T.); +#33393 = VERTEX_POINT('',#33394); +#33394 = CARTESIAN_POINT('',(9.000000214576,-1.54,0.799997854233)); +#33395 = LINE('',#33396,#33397); +#33396 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#33397 = VECTOR('',#33398,1.); +#33398 = DIRECTION('',(0.,0.,-1.)); +#33399 = ORIENTED_EDGE('',*,*,#33400,.F.); +#33400 = EDGE_CURVE('',#31607,#33393,#33401,.T.); +#33401 = LINE('',#33402,#33403); +#33402 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#33403 = VECTOR('',#33404,1.); +#33404 = DIRECTION('',(0.,0.,-1.)); +#33405 = ORIENTED_EDGE('',*,*,#31606,.T.); +#33406 = ORIENTED_EDGE('',*,*,#33407,.T.); +#33407 = EDGE_CURVE('',#31599,#33408,#33410,.T.); +#33408 = VERTEX_POINT('',#33409); +#33409 = CARTESIAN_POINT('',(9.000000214576,-1.91,0.799997854233)); +#33410 = LINE('',#33411,#33412); +#33411 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#33412 = VECTOR('',#33413,1.); +#33413 = DIRECTION('',(0.,0.,-1.)); +#33414 = ORIENTED_EDGE('',*,*,#33415,.T.); +#33415 = EDGE_CURVE('',#33408,#33416,#33418,.T.); +#33416 = VERTEX_POINT('',#33417); +#33417 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#33418 = LINE('',#33419,#33420); +#33419 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#33420 = VECTOR('',#33421,1.); +#33421 = DIRECTION('',(0.,0.,-1.)); +#33422 = ORIENTED_EDGE('',*,*,#33423,.T.); +#33423 = EDGE_CURVE('',#33416,#29964,#33424,.T.); +#33424 = LINE('',#33425,#33426); +#33425 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#33426 = VECTOR('',#33427,1.); +#33427 = DIRECTION('',(0.,0.,-1.)); +#33428 = PLANE('',#33429); +#33429 = AXIS2_PLACEMENT_3D('',#33430,#33431,#33432); +#33430 = CARTESIAN_POINT('',(9.,12.75,0.)); +#33431 = DIRECTION('',(1.,0.,0.)); +#33432 = DIRECTION('',(0.,-1.,0.)); +#33433 = ADVANCED_FACE('',(#33434),#33464,.F.); +#33434 = FACE_BOUND('',#33435,.T.); +#33435 = EDGE_LOOP('',(#33436,#33447,#33453,#33454,#33455,#33456,#33457, + #33458)); +#33436 = ORIENTED_EDGE('',*,*,#33437,.T.); +#33437 = EDGE_CURVE('',#33438,#33440,#33442,.T.); +#33438 = VERTEX_POINT('',#33439); +#33439 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#33440 = VERTEX_POINT('',#33441); +#33441 = CARTESIAN_POINT('',(-9.,-2.085,0.)); +#33442 = CIRCLE('',#33443,0.275); +#33443 = AXIS2_PLACEMENT_3D('',#33444,#33445,#33446); +#33444 = CARTESIAN_POINT('',(-9.,-2.36,0.)); +#33445 = DIRECTION('',(0.,0.,1.)); +#33446 = DIRECTION('',(1.,0.,-0.)); +#33447 = ORIENTED_EDGE('',*,*,#33448,.F.); +#33448 = EDGE_CURVE('',#28708,#33440,#33449,.T.); +#33449 = LINE('',#33450,#33451); +#33450 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#33451 = VECTOR('',#33452,1.); +#33452 = DIRECTION('',(0.,-1.,0.)); +#33453 = ORIENTED_EDGE('',*,*,#28715,.T.); +#33454 = ORIENTED_EDGE('',*,*,#28723,.T.); +#33455 = ORIENTED_EDGE('',*,*,#28731,.T.); +#33456 = ORIENTED_EDGE('',*,*,#28739,.F.); +#33457 = ORIENTED_EDGE('',*,*,#28747,.T.); +#33458 = ORIENTED_EDGE('',*,*,#33459,.F.); +#33459 = EDGE_CURVE('',#33438,#28748,#33460,.T.); +#33460 = LINE('',#33461,#33462); +#33461 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#33462 = VECTOR('',#33463,1.); +#33463 = DIRECTION('',(0.,-1.,0.)); +#33464 = PLANE('',#33465); +#33465 = AXIS2_PLACEMENT_3D('',#33466,#33467,#33468); +#33466 = CARTESIAN_POINT('',(-8.571261896074,-2.36,0.)); +#33467 = DIRECTION('',(0.,0.,1.)); +#33468 = DIRECTION('',(1.,0.,-0.)); +#33469 = ADVANCED_FACE('',(#33470),#33496,.T.); +#33470 = FACE_BOUND('',#33471,.F.); +#33471 = EDGE_LOOP('',(#33472,#33482,#33488,#33489,#33490)); +#33472 = ORIENTED_EDGE('',*,*,#33473,.F.); +#33473 = EDGE_CURVE('',#33474,#33476,#33478,.T.); +#33474 = VERTEX_POINT('',#33475); +#33475 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.145767343E-06)); +#33476 = VERTEX_POINT('',#33477); +#33477 = CARTESIAN_POINT('',(8.150000023842,-1.91,-1.943111538E-06)); +#33478 = LINE('',#33479,#33480); +#33479 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#33480 = VECTOR('',#33481,1.); +#33481 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33482 = ORIENTED_EDGE('',*,*,#33483,.T.); +#33483 = EDGE_CURVE('',#33474,#29964,#33484,.T.); +#33484 = LINE('',#33485,#33486); +#33485 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#33486 = VECTOR('',#33487,1.); +#33487 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33488 = ORIENTED_EDGE('',*,*,#29963,.T.); +#33489 = ORIENTED_EDGE('',*,*,#29955,.T.); +#33490 = ORIENTED_EDGE('',*,*,#33491,.F.); +#33491 = EDGE_CURVE('',#33476,#29948,#33492,.T.); +#33492 = LINE('',#33493,#33494); +#33493 = CARTESIAN_POINT('',(8.150000023842,-1.91,-1.94311153833E-06)); +#33494 = VECTOR('',#33495,1.); +#33495 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33496 = PLANE('',#33497); +#33497 = AXIS2_PLACEMENT_3D('',#33498,#33499,#33500); +#33498 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#33499 = DIRECTION('',(0.,1.,0.)); +#33500 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33501 = ADVANCED_FACE('',(#33502),#33520,.T.); +#33502 = FACE_BOUND('',#33503,.F.); +#33503 = EDGE_LOOP('',(#33504,#33512,#33513,#33514)); +#33504 = ORIENTED_EDGE('',*,*,#33505,.F.); +#33505 = EDGE_CURVE('',#33476,#33506,#33508,.T.); +#33506 = VERTEX_POINT('',#33507); +#33507 = CARTESIAN_POINT('',(8.150000023842,-2.81,-1.943111538E-06)); +#33508 = LINE('',#33509,#33510); +#33509 = CARTESIAN_POINT('',(8.150000023842,-1.91,-1.94311153833E-06)); +#33510 = VECTOR('',#33511,1.); +#33511 = DIRECTION('',(0.,-1.,0.)); +#33512 = ORIENTED_EDGE('',*,*,#33491,.T.); +#33513 = ORIENTED_EDGE('',*,*,#29947,.T.); +#33514 = ORIENTED_EDGE('',*,*,#33515,.F.); +#33515 = EDGE_CURVE('',#33506,#29940,#33516,.T.); +#33516 = LINE('',#33517,#33518); +#33517 = CARTESIAN_POINT('',(8.150000023842,-2.81,-1.94311153833E-06)); +#33518 = VECTOR('',#33519,1.); +#33519 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33520 = PLANE('',#33521); +#33521 = AXIS2_PLACEMENT_3D('',#33522,#33523,#33524); +#33522 = CARTESIAN_POINT('',(8.150000023842,-1.91,-1.94311153833E-06)); +#33523 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33524 = DIRECTION('',(0.,1.,0.)); +#33525 = ADVANCED_FACE('',(#33526),#33545,.T.); +#33526 = FACE_BOUND('',#33527,.F.); +#33527 = EDGE_LOOP('',(#33528,#33536,#33537,#33538,#33539)); +#33528 = ORIENTED_EDGE('',*,*,#33529,.F.); +#33529 = EDGE_CURVE('',#33506,#33530,#33532,.T.); +#33530 = VERTEX_POINT('',#33531); +#33531 = CARTESIAN_POINT('',(9.000000023842,-2.81,-2.145767343E-06)); +#33532 = LINE('',#33533,#33534); +#33533 = CARTESIAN_POINT('',(8.150000023842,-2.81,-1.94311153833E-06)); +#33534 = VECTOR('',#33535,1.); +#33535 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33536 = ORIENTED_EDGE('',*,*,#33515,.T.); +#33537 = ORIENTED_EDGE('',*,*,#29939,.F.); +#33538 = ORIENTED_EDGE('',*,*,#29931,.T.); +#33539 = ORIENTED_EDGE('',*,*,#33540,.F.); +#33540 = EDGE_CURVE('',#33530,#29924,#33541,.T.); +#33541 = LINE('',#33542,#33543); +#33542 = CARTESIAN_POINT('',(9.000000023842,-2.81,-2.14576734264E-06)); +#33543 = VECTOR('',#33544,1.); +#33544 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33545 = PLANE('',#33546); +#33546 = AXIS2_PLACEMENT_3D('',#33547,#33548,#33549); +#33547 = CARTESIAN_POINT('',(8.150000023842,-2.81,-1.94311153833E-06)); +#33548 = DIRECTION('',(0.,-1.,0.)); +#33549 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33550 = ADVANCED_FACE('',(#33551),#33583,.T.); +#33551 = FACE_BOUND('',#33552,.T.); +#33552 = EDGE_LOOP('',(#33553,#33554,#33562,#33568,#33569,#33577)); +#33553 = ORIENTED_EDGE('',*,*,#28755,.F.); +#33554 = ORIENTED_EDGE('',*,*,#33555,.F.); +#33555 = EDGE_CURVE('',#33556,#28756,#33558,.T.); +#33556 = VERTEX_POINT('',#33557); +#33557 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#33558 = LINE('',#33559,#33560); +#33559 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#33560 = VECTOR('',#33561,1.); +#33561 = DIRECTION('',(-0.,-0.,-1.)); +#33562 = ORIENTED_EDGE('',*,*,#33563,.F.); +#33563 = EDGE_CURVE('',#30791,#33556,#33564,.T.); +#33564 = LINE('',#33565,#33566); +#33565 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#33566 = VECTOR('',#33567,1.); +#33567 = DIRECTION('',(-0.,-0.,-1.)); +#33568 = ORIENTED_EDGE('',*,*,#30790,.T.); +#33569 = ORIENTED_EDGE('',*,*,#33570,.T.); +#33570 = EDGE_CURVE('',#30783,#33571,#33573,.T.); +#33571 = VERTEX_POINT('',#33572); +#33572 = CARTESIAN_POINT('',(-9.,-2.81,0.4)); +#33573 = LINE('',#33574,#33575); +#33574 = CARTESIAN_POINT('',(-9.,-2.81,0.8)); +#33575 = VECTOR('',#33576,1.); +#33576 = DIRECTION('',(-0.,-0.,-1.)); +#33577 = ORIENTED_EDGE('',*,*,#33578,.T.); +#33578 = EDGE_CURVE('',#33571,#28748,#33579,.T.); +#33579 = LINE('',#33580,#33581); +#33580 = CARTESIAN_POINT('',(-9.,-2.81,0.4)); +#33581 = VECTOR('',#33582,1.); +#33582 = DIRECTION('',(-0.,-0.,-1.)); +#33583 = PLANE('',#33584); +#33584 = AXIS2_PLACEMENT_3D('',#33585,#33586,#33587); +#33585 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#33586 = DIRECTION('',(-1.,0.,0.)); +#33587 = DIRECTION('',(0.,1.,0.)); +#33588 = ADVANCED_FACE('',(#33589),#33637,.T.); +#33589 = FACE_BOUND('',#33590,.T.); +#33590 = EDGE_LOOP('',(#33591,#33592,#33600,#33608,#33614,#33615,#33623, + #33631)); +#33591 = ORIENTED_EDGE('',*,*,#29923,.F.); +#33592 = ORIENTED_EDGE('',*,*,#33593,.F.); +#33593 = EDGE_CURVE('',#33594,#29924,#33596,.T.); +#33594 = VERTEX_POINT('',#33595); +#33595 = CARTESIAN_POINT('',(9.,-2.81,0.4)); +#33596 = LINE('',#33597,#33598); +#33597 = CARTESIAN_POINT('',(9.,-2.81,0.4)); +#33598 = VECTOR('',#33599,1.); +#33599 = DIRECTION('',(0.,0.,-1.)); +#33600 = ORIENTED_EDGE('',*,*,#33601,.F.); +#33601 = EDGE_CURVE('',#33602,#33594,#33604,.T.); +#33602 = VERTEX_POINT('',#33603); +#33603 = CARTESIAN_POINT('',(9.000000214576,-2.81,0.799997854233)); +#33604 = LINE('',#33605,#33606); +#33605 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#33606 = VECTOR('',#33607,1.); +#33607 = DIRECTION('',(0.,0.,-1.)); +#33608 = ORIENTED_EDGE('',*,*,#33609,.F.); +#33609 = EDGE_CURVE('',#31575,#33602,#33610,.T.); +#33610 = LINE('',#33611,#33612); +#33611 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#33612 = VECTOR('',#33613,1.); +#33613 = DIRECTION('',(0.,0.,-1.)); +#33614 = ORIENTED_EDGE('',*,*,#31574,.T.); +#33615 = ORIENTED_EDGE('',*,*,#33616,.T.); +#33616 = EDGE_CURVE('',#31567,#33617,#33619,.T.); +#33617 = VERTEX_POINT('',#33618); +#33618 = CARTESIAN_POINT('',(9.000000214576,-3.18,0.799997854233)); +#33619 = LINE('',#33620,#33621); +#33620 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#33621 = VECTOR('',#33622,1.); +#33622 = DIRECTION('',(0.,0.,-1.)); +#33623 = ORIENTED_EDGE('',*,*,#33624,.T.); +#33624 = EDGE_CURVE('',#33617,#33625,#33627,.T.); +#33625 = VERTEX_POINT('',#33626); +#33626 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#33627 = LINE('',#33628,#33629); +#33628 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#33629 = VECTOR('',#33630,1.); +#33630 = DIRECTION('',(0.,0.,-1.)); +#33631 = ORIENTED_EDGE('',*,*,#33632,.T.); +#33632 = EDGE_CURVE('',#33625,#29916,#33633,.T.); +#33633 = LINE('',#33634,#33635); +#33634 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#33635 = VECTOR('',#33636,1.); +#33636 = DIRECTION('',(0.,0.,-1.)); +#33637 = PLANE('',#33638); +#33638 = AXIS2_PLACEMENT_3D('',#33639,#33640,#33641); +#33639 = CARTESIAN_POINT('',(9.,12.75,0.)); +#33640 = DIRECTION('',(1.,0.,0.)); +#33641 = DIRECTION('',(0.,-1.,0.)); +#33642 = ADVANCED_FACE('',(#33643),#33673,.F.); +#33643 = FACE_BOUND('',#33644,.T.); +#33644 = EDGE_LOOP('',(#33645,#33656,#33662,#33663,#33664,#33665,#33666, + #33667)); +#33645 = ORIENTED_EDGE('',*,*,#33646,.T.); +#33646 = EDGE_CURVE('',#33647,#33649,#33651,.T.); +#33647 = VERTEX_POINT('',#33648); +#33648 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#33649 = VERTEX_POINT('',#33650); +#33650 = CARTESIAN_POINT('',(-9.,-3.355,0.)); +#33651 = CIRCLE('',#33652,0.275); +#33652 = AXIS2_PLACEMENT_3D('',#33653,#33654,#33655); +#33653 = CARTESIAN_POINT('',(-9.,-3.63,0.)); +#33654 = DIRECTION('',(0.,0.,1.)); +#33655 = DIRECTION('',(1.,0.,-0.)); +#33656 = ORIENTED_EDGE('',*,*,#33657,.F.); +#33657 = EDGE_CURVE('',#28756,#33649,#33658,.T.); +#33658 = LINE('',#33659,#33660); +#33659 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#33660 = VECTOR('',#33661,1.); +#33661 = DIRECTION('',(0.,-1.,0.)); +#33662 = ORIENTED_EDGE('',*,*,#28763,.T.); +#33663 = ORIENTED_EDGE('',*,*,#28771,.T.); +#33664 = ORIENTED_EDGE('',*,*,#28779,.T.); +#33665 = ORIENTED_EDGE('',*,*,#28787,.F.); +#33666 = ORIENTED_EDGE('',*,*,#28795,.T.); +#33667 = ORIENTED_EDGE('',*,*,#33668,.F.); +#33668 = EDGE_CURVE('',#33647,#28796,#33669,.T.); +#33669 = LINE('',#33670,#33671); +#33670 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#33671 = VECTOR('',#33672,1.); +#33672 = DIRECTION('',(0.,-1.,0.)); +#33673 = PLANE('',#33674); +#33674 = AXIS2_PLACEMENT_3D('',#33675,#33676,#33677); +#33675 = CARTESIAN_POINT('',(-8.571261896074,-3.63,0.)); +#33676 = DIRECTION('',(0.,0.,1.)); +#33677 = DIRECTION('',(1.,0.,-0.)); +#33678 = ADVANCED_FACE('',(#33679),#33705,.T.); +#33679 = FACE_BOUND('',#33680,.F.); +#33680 = EDGE_LOOP('',(#33681,#33691,#33697,#33698,#33699)); +#33681 = ORIENTED_EDGE('',*,*,#33682,.F.); +#33682 = EDGE_CURVE('',#33683,#33685,#33687,.T.); +#33683 = VERTEX_POINT('',#33684); +#33684 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.145767343E-06)); +#33685 = VERTEX_POINT('',#33686); +#33686 = CARTESIAN_POINT('',(8.150000023842,-3.18,-1.943111538E-06)); +#33687 = LINE('',#33688,#33689); +#33688 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#33689 = VECTOR('',#33690,1.); +#33690 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33691 = ORIENTED_EDGE('',*,*,#33692,.T.); +#33692 = EDGE_CURVE('',#33683,#29916,#33693,.T.); +#33693 = LINE('',#33694,#33695); +#33694 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#33695 = VECTOR('',#33696,1.); +#33696 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33697 = ORIENTED_EDGE('',*,*,#29915,.T.); +#33698 = ORIENTED_EDGE('',*,*,#29907,.T.); +#33699 = ORIENTED_EDGE('',*,*,#33700,.F.); +#33700 = EDGE_CURVE('',#33685,#29900,#33701,.T.); +#33701 = LINE('',#33702,#33703); +#33702 = CARTESIAN_POINT('',(8.150000023842,-3.18,-1.94311153833E-06)); +#33703 = VECTOR('',#33704,1.); +#33704 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33705 = PLANE('',#33706); +#33706 = AXIS2_PLACEMENT_3D('',#33707,#33708,#33709); +#33707 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#33708 = DIRECTION('',(0.,1.,0.)); +#33709 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33710 = ADVANCED_FACE('',(#33711),#33729,.T.); +#33711 = FACE_BOUND('',#33712,.F.); +#33712 = EDGE_LOOP('',(#33713,#33721,#33722,#33723)); +#33713 = ORIENTED_EDGE('',*,*,#33714,.F.); +#33714 = EDGE_CURVE('',#33685,#33715,#33717,.T.); +#33715 = VERTEX_POINT('',#33716); +#33716 = CARTESIAN_POINT('',(8.150000023842,-4.08,-1.943111538E-06)); +#33717 = LINE('',#33718,#33719); +#33718 = CARTESIAN_POINT('',(8.150000023842,-3.18,-1.94311153833E-06)); +#33719 = VECTOR('',#33720,1.); +#33720 = DIRECTION('',(0.,-1.,0.)); +#33721 = ORIENTED_EDGE('',*,*,#33700,.T.); +#33722 = ORIENTED_EDGE('',*,*,#29899,.T.); +#33723 = ORIENTED_EDGE('',*,*,#33724,.F.); +#33724 = EDGE_CURVE('',#33715,#29892,#33725,.T.); +#33725 = LINE('',#33726,#33727); +#33726 = CARTESIAN_POINT('',(8.150000023842,-4.08,-1.94311153833E-06)); +#33727 = VECTOR('',#33728,1.); +#33728 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33729 = PLANE('',#33730); +#33730 = AXIS2_PLACEMENT_3D('',#33731,#33732,#33733); +#33731 = CARTESIAN_POINT('',(8.150000023842,-3.18,-1.94311153833E-06)); +#33732 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33733 = DIRECTION('',(0.,1.,0.)); +#33734 = ADVANCED_FACE('',(#33735),#33754,.T.); +#33735 = FACE_BOUND('',#33736,.F.); +#33736 = EDGE_LOOP('',(#33737,#33745,#33746,#33747,#33748)); +#33737 = ORIENTED_EDGE('',*,*,#33738,.F.); +#33738 = EDGE_CURVE('',#33715,#33739,#33741,.T.); +#33739 = VERTEX_POINT('',#33740); +#33740 = CARTESIAN_POINT('',(9.000000023842,-4.08,-2.145767343E-06)); +#33741 = LINE('',#33742,#33743); +#33742 = CARTESIAN_POINT('',(8.150000023842,-4.08,-1.94311153833E-06)); +#33743 = VECTOR('',#33744,1.); +#33744 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33745 = ORIENTED_EDGE('',*,*,#33724,.T.); +#33746 = ORIENTED_EDGE('',*,*,#29891,.F.); +#33747 = ORIENTED_EDGE('',*,*,#29883,.T.); +#33748 = ORIENTED_EDGE('',*,*,#33749,.F.); +#33749 = EDGE_CURVE('',#33739,#29876,#33750,.T.); +#33750 = LINE('',#33751,#33752); +#33751 = CARTESIAN_POINT('',(9.000000023842,-4.08,-2.14576734264E-06)); +#33752 = VECTOR('',#33753,1.); +#33753 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33754 = PLANE('',#33755); +#33755 = AXIS2_PLACEMENT_3D('',#33756,#33757,#33758); +#33756 = CARTESIAN_POINT('',(8.150000023842,-4.08,-1.94311153833E-06)); +#33757 = DIRECTION('',(0.,-1.,0.)); +#33758 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33759 = ADVANCED_FACE('',(#33760),#33792,.T.); +#33760 = FACE_BOUND('',#33761,.T.); +#33761 = EDGE_LOOP('',(#33762,#33763,#33771,#33777,#33778,#33786)); +#33762 = ORIENTED_EDGE('',*,*,#28803,.F.); +#33763 = ORIENTED_EDGE('',*,*,#33764,.F.); +#33764 = EDGE_CURVE('',#33765,#28804,#33767,.T.); +#33765 = VERTEX_POINT('',#33766); +#33766 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#33767 = LINE('',#33768,#33769); +#33768 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#33769 = VECTOR('',#33770,1.); +#33770 = DIRECTION('',(-0.,-0.,-1.)); +#33771 = ORIENTED_EDGE('',*,*,#33772,.F.); +#33772 = EDGE_CURVE('',#30823,#33765,#33773,.T.); +#33773 = LINE('',#33774,#33775); +#33774 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#33775 = VECTOR('',#33776,1.); +#33776 = DIRECTION('',(-0.,-0.,-1.)); +#33777 = ORIENTED_EDGE('',*,*,#30822,.T.); +#33778 = ORIENTED_EDGE('',*,*,#33779,.T.); +#33779 = EDGE_CURVE('',#30815,#33780,#33782,.T.); +#33780 = VERTEX_POINT('',#33781); +#33781 = CARTESIAN_POINT('',(-9.,-4.08,0.4)); +#33782 = LINE('',#33783,#33784); +#33783 = CARTESIAN_POINT('',(-9.,-4.08,0.8)); +#33784 = VECTOR('',#33785,1.); +#33785 = DIRECTION('',(-0.,-0.,-1.)); +#33786 = ORIENTED_EDGE('',*,*,#33787,.T.); +#33787 = EDGE_CURVE('',#33780,#28796,#33788,.T.); +#33788 = LINE('',#33789,#33790); +#33789 = CARTESIAN_POINT('',(-9.,-4.08,0.4)); +#33790 = VECTOR('',#33791,1.); +#33791 = DIRECTION('',(-0.,-0.,-1.)); +#33792 = PLANE('',#33793); +#33793 = AXIS2_PLACEMENT_3D('',#33794,#33795,#33796); +#33794 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#33795 = DIRECTION('',(-1.,0.,0.)); +#33796 = DIRECTION('',(0.,1.,0.)); +#33797 = ADVANCED_FACE('',(#33798),#33846,.T.); +#33798 = FACE_BOUND('',#33799,.T.); +#33799 = EDGE_LOOP('',(#33800,#33801,#33809,#33817,#33823,#33824,#33832, + #33840)); +#33800 = ORIENTED_EDGE('',*,*,#29875,.F.); +#33801 = ORIENTED_EDGE('',*,*,#33802,.F.); +#33802 = EDGE_CURVE('',#33803,#29876,#33805,.T.); +#33803 = VERTEX_POINT('',#33804); +#33804 = CARTESIAN_POINT('',(9.,-4.08,0.4)); +#33805 = LINE('',#33806,#33807); +#33806 = CARTESIAN_POINT('',(9.,-4.08,0.4)); +#33807 = VECTOR('',#33808,1.); +#33808 = DIRECTION('',(0.,0.,-1.)); +#33809 = ORIENTED_EDGE('',*,*,#33810,.F.); +#33810 = EDGE_CURVE('',#33811,#33803,#33813,.T.); +#33811 = VERTEX_POINT('',#33812); +#33812 = CARTESIAN_POINT('',(9.000000214576,-4.08,0.799997854233)); +#33813 = LINE('',#33814,#33815); +#33814 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#33815 = VECTOR('',#33816,1.); +#33816 = DIRECTION('',(0.,0.,-1.)); +#33817 = ORIENTED_EDGE('',*,*,#33818,.F.); +#33818 = EDGE_CURVE('',#31543,#33811,#33819,.T.); +#33819 = LINE('',#33820,#33821); +#33820 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#33821 = VECTOR('',#33822,1.); +#33822 = DIRECTION('',(0.,0.,-1.)); +#33823 = ORIENTED_EDGE('',*,*,#31542,.T.); +#33824 = ORIENTED_EDGE('',*,*,#33825,.T.); +#33825 = EDGE_CURVE('',#31535,#33826,#33828,.T.); +#33826 = VERTEX_POINT('',#33827); +#33827 = CARTESIAN_POINT('',(9.000000214576,-4.45,0.799997854233)); +#33828 = LINE('',#33829,#33830); +#33829 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#33830 = VECTOR('',#33831,1.); +#33831 = DIRECTION('',(0.,0.,-1.)); +#33832 = ORIENTED_EDGE('',*,*,#33833,.T.); +#33833 = EDGE_CURVE('',#33826,#33834,#33836,.T.); +#33834 = VERTEX_POINT('',#33835); +#33835 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#33836 = LINE('',#33837,#33838); +#33837 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#33838 = VECTOR('',#33839,1.); +#33839 = DIRECTION('',(0.,0.,-1.)); +#33840 = ORIENTED_EDGE('',*,*,#33841,.T.); +#33841 = EDGE_CURVE('',#33834,#29868,#33842,.T.); +#33842 = LINE('',#33843,#33844); +#33843 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#33844 = VECTOR('',#33845,1.); +#33845 = DIRECTION('',(0.,0.,-1.)); +#33846 = PLANE('',#33847); +#33847 = AXIS2_PLACEMENT_3D('',#33848,#33849,#33850); +#33848 = CARTESIAN_POINT('',(9.,12.75,0.)); +#33849 = DIRECTION('',(1.,0.,0.)); +#33850 = DIRECTION('',(0.,-1.,0.)); +#33851 = ADVANCED_FACE('',(#33852),#33882,.F.); +#33852 = FACE_BOUND('',#33853,.T.); +#33853 = EDGE_LOOP('',(#33854,#33865,#33871,#33872,#33873,#33874,#33875, + #33876)); +#33854 = ORIENTED_EDGE('',*,*,#33855,.T.); +#33855 = EDGE_CURVE('',#33856,#33858,#33860,.T.); +#33856 = VERTEX_POINT('',#33857); +#33857 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#33858 = VERTEX_POINT('',#33859); +#33859 = CARTESIAN_POINT('',(-9.,-4.625,0.)); +#33860 = CIRCLE('',#33861,0.275); +#33861 = AXIS2_PLACEMENT_3D('',#33862,#33863,#33864); +#33862 = CARTESIAN_POINT('',(-9.,-4.9,0.)); +#33863 = DIRECTION('',(0.,0.,1.)); +#33864 = DIRECTION('',(1.,0.,-0.)); +#33865 = ORIENTED_EDGE('',*,*,#33866,.F.); +#33866 = EDGE_CURVE('',#28804,#33858,#33867,.T.); +#33867 = LINE('',#33868,#33869); +#33868 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#33869 = VECTOR('',#33870,1.); +#33870 = DIRECTION('',(0.,-1.,0.)); +#33871 = ORIENTED_EDGE('',*,*,#28811,.T.); +#33872 = ORIENTED_EDGE('',*,*,#28819,.T.); +#33873 = ORIENTED_EDGE('',*,*,#28827,.T.); +#33874 = ORIENTED_EDGE('',*,*,#28835,.F.); +#33875 = ORIENTED_EDGE('',*,*,#28843,.T.); +#33876 = ORIENTED_EDGE('',*,*,#33877,.F.); +#33877 = EDGE_CURVE('',#33856,#28844,#33878,.T.); +#33878 = LINE('',#33879,#33880); +#33879 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#33880 = VECTOR('',#33881,1.); +#33881 = DIRECTION('',(0.,-1.,0.)); +#33882 = PLANE('',#33883); +#33883 = AXIS2_PLACEMENT_3D('',#33884,#33885,#33886); +#33884 = CARTESIAN_POINT('',(-8.571261896074,-4.9,0.)); +#33885 = DIRECTION('',(0.,0.,1.)); +#33886 = DIRECTION('',(1.,0.,-0.)); +#33887 = ADVANCED_FACE('',(#33888),#33914,.T.); +#33888 = FACE_BOUND('',#33889,.F.); +#33889 = EDGE_LOOP('',(#33890,#33900,#33906,#33907,#33908)); +#33890 = ORIENTED_EDGE('',*,*,#33891,.F.); +#33891 = EDGE_CURVE('',#33892,#33894,#33896,.T.); +#33892 = VERTEX_POINT('',#33893); +#33893 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.145767343E-06)); +#33894 = VERTEX_POINT('',#33895); +#33895 = CARTESIAN_POINT('',(8.150000023842,-4.45,-1.943111538E-06)); +#33896 = LINE('',#33897,#33898); +#33897 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#33898 = VECTOR('',#33899,1.); +#33899 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33900 = ORIENTED_EDGE('',*,*,#33901,.T.); +#33901 = EDGE_CURVE('',#33892,#29868,#33902,.T.); +#33902 = LINE('',#33903,#33904); +#33903 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#33904 = VECTOR('',#33905,1.); +#33905 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33906 = ORIENTED_EDGE('',*,*,#29867,.T.); +#33907 = ORIENTED_EDGE('',*,*,#29859,.T.); +#33908 = ORIENTED_EDGE('',*,*,#33909,.F.); +#33909 = EDGE_CURVE('',#33894,#29852,#33910,.T.); +#33910 = LINE('',#33911,#33912); +#33911 = CARTESIAN_POINT('',(8.150000023842,-4.45,-1.94311153833E-06)); +#33912 = VECTOR('',#33913,1.); +#33913 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33914 = PLANE('',#33915); +#33915 = AXIS2_PLACEMENT_3D('',#33916,#33917,#33918); +#33916 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#33917 = DIRECTION('',(0.,1.,0.)); +#33918 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33919 = ADVANCED_FACE('',(#33920),#33938,.T.); +#33920 = FACE_BOUND('',#33921,.F.); +#33921 = EDGE_LOOP('',(#33922,#33930,#33931,#33932)); +#33922 = ORIENTED_EDGE('',*,*,#33923,.F.); +#33923 = EDGE_CURVE('',#33894,#33924,#33926,.T.); +#33924 = VERTEX_POINT('',#33925); +#33925 = CARTESIAN_POINT('',(8.150000023842,-5.35,-1.943111538E-06)); +#33926 = LINE('',#33927,#33928); +#33927 = CARTESIAN_POINT('',(8.150000023842,-4.45,-1.94311153833E-06)); +#33928 = VECTOR('',#33929,1.); +#33929 = DIRECTION('',(0.,-1.,0.)); +#33930 = ORIENTED_EDGE('',*,*,#33909,.T.); +#33931 = ORIENTED_EDGE('',*,*,#29851,.T.); +#33932 = ORIENTED_EDGE('',*,*,#33933,.F.); +#33933 = EDGE_CURVE('',#33924,#29844,#33934,.T.); +#33934 = LINE('',#33935,#33936); +#33935 = CARTESIAN_POINT('',(8.150000023842,-5.35,-1.94311153833E-06)); +#33936 = VECTOR('',#33937,1.); +#33937 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33938 = PLANE('',#33939); +#33939 = AXIS2_PLACEMENT_3D('',#33940,#33941,#33942); +#33940 = CARTESIAN_POINT('',(8.150000023842,-4.45,-1.94311153833E-06)); +#33941 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33942 = DIRECTION('',(0.,1.,0.)); +#33943 = ADVANCED_FACE('',(#33944),#33963,.T.); +#33944 = FACE_BOUND('',#33945,.F.); +#33945 = EDGE_LOOP('',(#33946,#33954,#33955,#33956,#33957)); +#33946 = ORIENTED_EDGE('',*,*,#33947,.F.); +#33947 = EDGE_CURVE('',#33924,#33948,#33950,.T.); +#33948 = VERTEX_POINT('',#33949); +#33949 = CARTESIAN_POINT('',(9.000000023842,-5.35,-2.145767343E-06)); +#33950 = LINE('',#33951,#33952); +#33951 = CARTESIAN_POINT('',(8.150000023842,-5.35,-1.94311153833E-06)); +#33952 = VECTOR('',#33953,1.); +#33953 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33954 = ORIENTED_EDGE('',*,*,#33933,.T.); +#33955 = ORIENTED_EDGE('',*,*,#29843,.F.); +#33956 = ORIENTED_EDGE('',*,*,#29835,.T.); +#33957 = ORIENTED_EDGE('',*,*,#33958,.F.); +#33958 = EDGE_CURVE('',#33948,#29828,#33959,.T.); +#33959 = LINE('',#33960,#33961); +#33960 = CARTESIAN_POINT('',(9.000000023842,-5.35,-2.14576734264E-06)); +#33961 = VECTOR('',#33962,1.); +#33962 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33963 = PLANE('',#33964); +#33964 = AXIS2_PLACEMENT_3D('',#33965,#33966,#33967); +#33965 = CARTESIAN_POINT('',(8.150000023842,-5.35,-1.94311153833E-06)); +#33966 = DIRECTION('',(0.,-1.,0.)); +#33967 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33968 = ADVANCED_FACE('',(#33969),#34001,.T.); +#33969 = FACE_BOUND('',#33970,.T.); +#33970 = EDGE_LOOP('',(#33971,#33972,#33980,#33986,#33987,#33995)); +#33971 = ORIENTED_EDGE('',*,*,#28851,.F.); +#33972 = ORIENTED_EDGE('',*,*,#33973,.F.); +#33973 = EDGE_CURVE('',#33974,#28852,#33976,.T.); +#33974 = VERTEX_POINT('',#33975); +#33975 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#33976 = LINE('',#33977,#33978); +#33977 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#33978 = VECTOR('',#33979,1.); +#33979 = DIRECTION('',(-0.,-0.,-1.)); +#33980 = ORIENTED_EDGE('',*,*,#33981,.F.); +#33981 = EDGE_CURVE('',#30855,#33974,#33982,.T.); +#33982 = LINE('',#33983,#33984); +#33983 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#33984 = VECTOR('',#33985,1.); +#33985 = DIRECTION('',(-0.,-0.,-1.)); +#33986 = ORIENTED_EDGE('',*,*,#30854,.T.); +#33987 = ORIENTED_EDGE('',*,*,#33988,.T.); +#33988 = EDGE_CURVE('',#30847,#33989,#33991,.T.); +#33989 = VERTEX_POINT('',#33990); +#33990 = CARTESIAN_POINT('',(-9.,-5.35,0.4)); +#33991 = LINE('',#33992,#33993); +#33992 = CARTESIAN_POINT('',(-9.,-5.35,0.8)); +#33993 = VECTOR('',#33994,1.); +#33994 = DIRECTION('',(-0.,-0.,-1.)); +#33995 = ORIENTED_EDGE('',*,*,#33996,.T.); +#33996 = EDGE_CURVE('',#33989,#28844,#33997,.T.); +#33997 = LINE('',#33998,#33999); +#33998 = CARTESIAN_POINT('',(-9.,-5.35,0.4)); +#33999 = VECTOR('',#34000,1.); +#34000 = DIRECTION('',(-0.,-0.,-1.)); +#34001 = PLANE('',#34002); +#34002 = AXIS2_PLACEMENT_3D('',#34003,#34004,#34005); +#34003 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34004 = DIRECTION('',(-1.,0.,0.)); +#34005 = DIRECTION('',(0.,1.,0.)); +#34006 = ADVANCED_FACE('',(#34007),#34055,.T.); +#34007 = FACE_BOUND('',#34008,.T.); +#34008 = EDGE_LOOP('',(#34009,#34010,#34018,#34026,#34032,#34033,#34041, + #34049)); +#34009 = ORIENTED_EDGE('',*,*,#29827,.F.); +#34010 = ORIENTED_EDGE('',*,*,#34011,.F.); +#34011 = EDGE_CURVE('',#34012,#29828,#34014,.T.); +#34012 = VERTEX_POINT('',#34013); +#34013 = CARTESIAN_POINT('',(9.,-5.35,0.4)); +#34014 = LINE('',#34015,#34016); +#34015 = CARTESIAN_POINT('',(9.,-5.35,0.4)); +#34016 = VECTOR('',#34017,1.); +#34017 = DIRECTION('',(0.,0.,-1.)); +#34018 = ORIENTED_EDGE('',*,*,#34019,.F.); +#34019 = EDGE_CURVE('',#34020,#34012,#34022,.T.); +#34020 = VERTEX_POINT('',#34021); +#34021 = CARTESIAN_POINT('',(9.000000214576,-5.35,0.799997854233)); +#34022 = LINE('',#34023,#34024); +#34023 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#34024 = VECTOR('',#34025,1.); +#34025 = DIRECTION('',(0.,0.,-1.)); +#34026 = ORIENTED_EDGE('',*,*,#34027,.F.); +#34027 = EDGE_CURVE('',#31511,#34020,#34028,.T.); +#34028 = LINE('',#34029,#34030); +#34029 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#34030 = VECTOR('',#34031,1.); +#34031 = DIRECTION('',(0.,0.,-1.)); +#34032 = ORIENTED_EDGE('',*,*,#31510,.T.); +#34033 = ORIENTED_EDGE('',*,*,#34034,.T.); +#34034 = EDGE_CURVE('',#31503,#34035,#34037,.T.); +#34035 = VERTEX_POINT('',#34036); +#34036 = CARTESIAN_POINT('',(9.000000214576,-5.72,0.799997854233)); +#34037 = LINE('',#34038,#34039); +#34038 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#34039 = VECTOR('',#34040,1.); +#34040 = DIRECTION('',(0.,0.,-1.)); +#34041 = ORIENTED_EDGE('',*,*,#34042,.T.); +#34042 = EDGE_CURVE('',#34035,#34043,#34045,.T.); +#34043 = VERTEX_POINT('',#34044); +#34044 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#34045 = LINE('',#34046,#34047); +#34046 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#34047 = VECTOR('',#34048,1.); +#34048 = DIRECTION('',(0.,0.,-1.)); +#34049 = ORIENTED_EDGE('',*,*,#34050,.T.); +#34050 = EDGE_CURVE('',#34043,#29820,#34051,.T.); +#34051 = LINE('',#34052,#34053); +#34052 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#34053 = VECTOR('',#34054,1.); +#34054 = DIRECTION('',(0.,0.,-1.)); +#34055 = PLANE('',#34056); +#34056 = AXIS2_PLACEMENT_3D('',#34057,#34058,#34059); +#34057 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34058 = DIRECTION('',(1.,0.,0.)); +#34059 = DIRECTION('',(0.,-1.,0.)); +#34060 = ADVANCED_FACE('',(#34061),#34091,.F.); +#34061 = FACE_BOUND('',#34062,.T.); +#34062 = EDGE_LOOP('',(#34063,#34074,#34080,#34081,#34082,#34083,#34084, + #34085)); +#34063 = ORIENTED_EDGE('',*,*,#34064,.T.); +#34064 = EDGE_CURVE('',#34065,#34067,#34069,.T.); +#34065 = VERTEX_POINT('',#34066); +#34066 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#34067 = VERTEX_POINT('',#34068); +#34068 = CARTESIAN_POINT('',(-9.,-5.895,0.)); +#34069 = CIRCLE('',#34070,0.275); +#34070 = AXIS2_PLACEMENT_3D('',#34071,#34072,#34073); +#34071 = CARTESIAN_POINT('',(-9.,-6.17,0.)); +#34072 = DIRECTION('',(0.,0.,1.)); +#34073 = DIRECTION('',(1.,0.,-0.)); +#34074 = ORIENTED_EDGE('',*,*,#34075,.F.); +#34075 = EDGE_CURVE('',#28852,#34067,#34076,.T.); +#34076 = LINE('',#34077,#34078); +#34077 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#34078 = VECTOR('',#34079,1.); +#34079 = DIRECTION('',(0.,-1.,0.)); +#34080 = ORIENTED_EDGE('',*,*,#28859,.T.); +#34081 = ORIENTED_EDGE('',*,*,#28867,.T.); +#34082 = ORIENTED_EDGE('',*,*,#28875,.T.); +#34083 = ORIENTED_EDGE('',*,*,#28883,.F.); +#34084 = ORIENTED_EDGE('',*,*,#28891,.T.); +#34085 = ORIENTED_EDGE('',*,*,#34086,.F.); +#34086 = EDGE_CURVE('',#34065,#28892,#34087,.T.); +#34087 = LINE('',#34088,#34089); +#34088 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#34089 = VECTOR('',#34090,1.); +#34090 = DIRECTION('',(0.,-1.,0.)); +#34091 = PLANE('',#34092); +#34092 = AXIS2_PLACEMENT_3D('',#34093,#34094,#34095); +#34093 = CARTESIAN_POINT('',(-8.571261896074,-6.17,0.)); +#34094 = DIRECTION('',(0.,0.,1.)); +#34095 = DIRECTION('',(1.,0.,-0.)); +#34096 = ADVANCED_FACE('',(#34097),#34123,.T.); +#34097 = FACE_BOUND('',#34098,.F.); +#34098 = EDGE_LOOP('',(#34099,#34109,#34115,#34116,#34117)); +#34099 = ORIENTED_EDGE('',*,*,#34100,.F.); +#34100 = EDGE_CURVE('',#34101,#34103,#34105,.T.); +#34101 = VERTEX_POINT('',#34102); +#34102 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.145767343E-06)); +#34103 = VERTEX_POINT('',#34104); +#34104 = CARTESIAN_POINT('',(8.150000023842,-5.72,-1.943111538E-06)); +#34105 = LINE('',#34106,#34107); +#34106 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#34107 = VECTOR('',#34108,1.); +#34108 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34109 = ORIENTED_EDGE('',*,*,#34110,.T.); +#34110 = EDGE_CURVE('',#34101,#29820,#34111,.T.); +#34111 = LINE('',#34112,#34113); +#34112 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#34113 = VECTOR('',#34114,1.); +#34114 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34115 = ORIENTED_EDGE('',*,*,#29819,.T.); +#34116 = ORIENTED_EDGE('',*,*,#29811,.T.); +#34117 = ORIENTED_EDGE('',*,*,#34118,.F.); +#34118 = EDGE_CURVE('',#34103,#29804,#34119,.T.); +#34119 = LINE('',#34120,#34121); +#34120 = CARTESIAN_POINT('',(8.150000023842,-5.72,-1.94311153833E-06)); +#34121 = VECTOR('',#34122,1.); +#34122 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34123 = PLANE('',#34124); +#34124 = AXIS2_PLACEMENT_3D('',#34125,#34126,#34127); +#34125 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#34126 = DIRECTION('',(0.,1.,0.)); +#34127 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34128 = ADVANCED_FACE('',(#34129),#34147,.T.); +#34129 = FACE_BOUND('',#34130,.F.); +#34130 = EDGE_LOOP('',(#34131,#34139,#34140,#34141)); +#34131 = ORIENTED_EDGE('',*,*,#34132,.F.); +#34132 = EDGE_CURVE('',#34103,#34133,#34135,.T.); +#34133 = VERTEX_POINT('',#34134); +#34134 = CARTESIAN_POINT('',(8.150000023842,-6.62,-1.943111538E-06)); +#34135 = LINE('',#34136,#34137); +#34136 = CARTESIAN_POINT('',(8.150000023842,-5.72,-1.94311153833E-06)); +#34137 = VECTOR('',#34138,1.); +#34138 = DIRECTION('',(0.,-1.,0.)); +#34139 = ORIENTED_EDGE('',*,*,#34118,.T.); +#34140 = ORIENTED_EDGE('',*,*,#29803,.T.); +#34141 = ORIENTED_EDGE('',*,*,#34142,.F.); +#34142 = EDGE_CURVE('',#34133,#29796,#34143,.T.); +#34143 = LINE('',#34144,#34145); +#34144 = CARTESIAN_POINT('',(8.150000023842,-6.62,-1.94311153833E-06)); +#34145 = VECTOR('',#34146,1.); +#34146 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34147 = PLANE('',#34148); +#34148 = AXIS2_PLACEMENT_3D('',#34149,#34150,#34151); +#34149 = CARTESIAN_POINT('',(8.150000023842,-5.72,-1.94311153833E-06)); +#34150 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34151 = DIRECTION('',(0.,1.,0.)); +#34152 = ADVANCED_FACE('',(#34153),#34172,.T.); +#34153 = FACE_BOUND('',#34154,.F.); +#34154 = EDGE_LOOP('',(#34155,#34163,#34164,#34165,#34166)); +#34155 = ORIENTED_EDGE('',*,*,#34156,.F.); +#34156 = EDGE_CURVE('',#34133,#34157,#34159,.T.); +#34157 = VERTEX_POINT('',#34158); +#34158 = CARTESIAN_POINT('',(9.000000023842,-6.62,-2.145767343E-06)); +#34159 = LINE('',#34160,#34161); +#34160 = CARTESIAN_POINT('',(8.150000023842,-6.62,-1.94311153833E-06)); +#34161 = VECTOR('',#34162,1.); +#34162 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34163 = ORIENTED_EDGE('',*,*,#34142,.T.); +#34164 = ORIENTED_EDGE('',*,*,#29795,.F.); +#34165 = ORIENTED_EDGE('',*,*,#29787,.T.); +#34166 = ORIENTED_EDGE('',*,*,#34167,.F.); +#34167 = EDGE_CURVE('',#34157,#29780,#34168,.T.); +#34168 = LINE('',#34169,#34170); +#34169 = CARTESIAN_POINT('',(9.000000023842,-6.62,-2.14576734264E-06)); +#34170 = VECTOR('',#34171,1.); +#34171 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34172 = PLANE('',#34173); +#34173 = AXIS2_PLACEMENT_3D('',#34174,#34175,#34176); +#34174 = CARTESIAN_POINT('',(8.150000023842,-6.62,-1.94311153833E-06)); +#34175 = DIRECTION('',(0.,-1.,0.)); +#34176 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34177 = ADVANCED_FACE('',(#34178),#34210,.T.); +#34178 = FACE_BOUND('',#34179,.T.); +#34179 = EDGE_LOOP('',(#34180,#34181,#34189,#34195,#34196,#34204)); +#34180 = ORIENTED_EDGE('',*,*,#28899,.F.); +#34181 = ORIENTED_EDGE('',*,*,#34182,.F.); +#34182 = EDGE_CURVE('',#34183,#28900,#34185,.T.); +#34183 = VERTEX_POINT('',#34184); +#34184 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#34185 = LINE('',#34186,#34187); +#34186 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#34187 = VECTOR('',#34188,1.); +#34188 = DIRECTION('',(-0.,-0.,-1.)); +#34189 = ORIENTED_EDGE('',*,*,#34190,.F.); +#34190 = EDGE_CURVE('',#30887,#34183,#34191,.T.); +#34191 = LINE('',#34192,#34193); +#34192 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#34193 = VECTOR('',#34194,1.); +#34194 = DIRECTION('',(-0.,-0.,-1.)); +#34195 = ORIENTED_EDGE('',*,*,#30886,.T.); +#34196 = ORIENTED_EDGE('',*,*,#34197,.T.); +#34197 = EDGE_CURVE('',#30879,#34198,#34200,.T.); +#34198 = VERTEX_POINT('',#34199); +#34199 = CARTESIAN_POINT('',(-9.,-6.62,0.4)); +#34200 = LINE('',#34201,#34202); +#34201 = CARTESIAN_POINT('',(-9.,-6.62,0.8)); +#34202 = VECTOR('',#34203,1.); +#34203 = DIRECTION('',(-0.,-0.,-1.)); +#34204 = ORIENTED_EDGE('',*,*,#34205,.T.); +#34205 = EDGE_CURVE('',#34198,#28892,#34206,.T.); +#34206 = LINE('',#34207,#34208); +#34207 = CARTESIAN_POINT('',(-9.,-6.62,0.4)); +#34208 = VECTOR('',#34209,1.); +#34209 = DIRECTION('',(-0.,-0.,-1.)); +#34210 = PLANE('',#34211); +#34211 = AXIS2_PLACEMENT_3D('',#34212,#34213,#34214); +#34212 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34213 = DIRECTION('',(-1.,0.,0.)); +#34214 = DIRECTION('',(0.,1.,0.)); +#34215 = ADVANCED_FACE('',(#34216),#34264,.T.); +#34216 = FACE_BOUND('',#34217,.T.); +#34217 = EDGE_LOOP('',(#34218,#34219,#34227,#34235,#34241,#34242,#34250, + #34258)); +#34218 = ORIENTED_EDGE('',*,*,#29779,.F.); +#34219 = ORIENTED_EDGE('',*,*,#34220,.F.); +#34220 = EDGE_CURVE('',#34221,#29780,#34223,.T.); +#34221 = VERTEX_POINT('',#34222); +#34222 = CARTESIAN_POINT('',(9.,-6.62,0.4)); +#34223 = LINE('',#34224,#34225); +#34224 = CARTESIAN_POINT('',(9.,-6.62,0.4)); +#34225 = VECTOR('',#34226,1.); +#34226 = DIRECTION('',(0.,0.,-1.)); +#34227 = ORIENTED_EDGE('',*,*,#34228,.F.); +#34228 = EDGE_CURVE('',#34229,#34221,#34231,.T.); +#34229 = VERTEX_POINT('',#34230); +#34230 = CARTESIAN_POINT('',(9.000000214576,-6.62,0.799997854233)); +#34231 = LINE('',#34232,#34233); +#34232 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#34233 = VECTOR('',#34234,1.); +#34234 = DIRECTION('',(0.,0.,-1.)); +#34235 = ORIENTED_EDGE('',*,*,#34236,.F.); +#34236 = EDGE_CURVE('',#31479,#34229,#34237,.T.); +#34237 = LINE('',#34238,#34239); +#34238 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#34239 = VECTOR('',#34240,1.); +#34240 = DIRECTION('',(0.,0.,-1.)); +#34241 = ORIENTED_EDGE('',*,*,#31478,.T.); +#34242 = ORIENTED_EDGE('',*,*,#34243,.T.); +#34243 = EDGE_CURVE('',#31471,#34244,#34246,.T.); +#34244 = VERTEX_POINT('',#34245); +#34245 = CARTESIAN_POINT('',(9.000000214576,-6.99,0.799997854233)); +#34246 = LINE('',#34247,#34248); +#34247 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#34248 = VECTOR('',#34249,1.); +#34249 = DIRECTION('',(0.,0.,-1.)); +#34250 = ORIENTED_EDGE('',*,*,#34251,.T.); +#34251 = EDGE_CURVE('',#34244,#34252,#34254,.T.); +#34252 = VERTEX_POINT('',#34253); +#34253 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#34254 = LINE('',#34255,#34256); +#34255 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#34256 = VECTOR('',#34257,1.); +#34257 = DIRECTION('',(0.,0.,-1.)); +#34258 = ORIENTED_EDGE('',*,*,#34259,.T.); +#34259 = EDGE_CURVE('',#34252,#29772,#34260,.T.); +#34260 = LINE('',#34261,#34262); +#34261 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#34262 = VECTOR('',#34263,1.); +#34263 = DIRECTION('',(0.,0.,-1.)); +#34264 = PLANE('',#34265); +#34265 = AXIS2_PLACEMENT_3D('',#34266,#34267,#34268); +#34266 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34267 = DIRECTION('',(1.,0.,0.)); +#34268 = DIRECTION('',(0.,-1.,0.)); +#34269 = ADVANCED_FACE('',(#34270),#34300,.F.); +#34270 = FACE_BOUND('',#34271,.T.); +#34271 = EDGE_LOOP('',(#34272,#34283,#34289,#34290,#34291,#34292,#34293, + #34294)); +#34272 = ORIENTED_EDGE('',*,*,#34273,.T.); +#34273 = EDGE_CURVE('',#34274,#34276,#34278,.T.); +#34274 = VERTEX_POINT('',#34275); +#34275 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#34276 = VERTEX_POINT('',#34277); +#34277 = CARTESIAN_POINT('',(-9.,-7.165,0.)); +#34278 = CIRCLE('',#34279,0.275); +#34279 = AXIS2_PLACEMENT_3D('',#34280,#34281,#34282); +#34280 = CARTESIAN_POINT('',(-9.,-7.44,0.)); +#34281 = DIRECTION('',(0.,0.,1.)); +#34282 = DIRECTION('',(1.,0.,-0.)); +#34283 = ORIENTED_EDGE('',*,*,#34284,.F.); +#34284 = EDGE_CURVE('',#28900,#34276,#34285,.T.); +#34285 = LINE('',#34286,#34287); +#34286 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#34287 = VECTOR('',#34288,1.); +#34288 = DIRECTION('',(0.,-1.,0.)); +#34289 = ORIENTED_EDGE('',*,*,#28907,.T.); +#34290 = ORIENTED_EDGE('',*,*,#28915,.T.); +#34291 = ORIENTED_EDGE('',*,*,#28923,.T.); +#34292 = ORIENTED_EDGE('',*,*,#28931,.F.); +#34293 = ORIENTED_EDGE('',*,*,#28939,.T.); +#34294 = ORIENTED_EDGE('',*,*,#34295,.F.); +#34295 = EDGE_CURVE('',#34274,#28940,#34296,.T.); +#34296 = LINE('',#34297,#34298); +#34297 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#34298 = VECTOR('',#34299,1.); +#34299 = DIRECTION('',(0.,-1.,0.)); +#34300 = PLANE('',#34301); +#34301 = AXIS2_PLACEMENT_3D('',#34302,#34303,#34304); +#34302 = CARTESIAN_POINT('',(-8.571261896074,-7.44,0.)); +#34303 = DIRECTION('',(0.,0.,1.)); +#34304 = DIRECTION('',(1.,0.,-0.)); +#34305 = ADVANCED_FACE('',(#34306),#34332,.T.); +#34306 = FACE_BOUND('',#34307,.F.); +#34307 = EDGE_LOOP('',(#34308,#34318,#34324,#34325,#34326)); +#34308 = ORIENTED_EDGE('',*,*,#34309,.F.); +#34309 = EDGE_CURVE('',#34310,#34312,#34314,.T.); +#34310 = VERTEX_POINT('',#34311); +#34311 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.145767343E-06)); +#34312 = VERTEX_POINT('',#34313); +#34313 = CARTESIAN_POINT('',(8.150000023842,-6.99,-1.943111538E-06)); +#34314 = LINE('',#34315,#34316); +#34315 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#34316 = VECTOR('',#34317,1.); +#34317 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34318 = ORIENTED_EDGE('',*,*,#34319,.T.); +#34319 = EDGE_CURVE('',#34310,#29772,#34320,.T.); +#34320 = LINE('',#34321,#34322); +#34321 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#34322 = VECTOR('',#34323,1.); +#34323 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34324 = ORIENTED_EDGE('',*,*,#29771,.T.); +#34325 = ORIENTED_EDGE('',*,*,#29763,.T.); +#34326 = ORIENTED_EDGE('',*,*,#34327,.F.); +#34327 = EDGE_CURVE('',#34312,#29756,#34328,.T.); +#34328 = LINE('',#34329,#34330); +#34329 = CARTESIAN_POINT('',(8.150000023842,-6.99,-1.94311153833E-06)); +#34330 = VECTOR('',#34331,1.); +#34331 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34332 = PLANE('',#34333); +#34333 = AXIS2_PLACEMENT_3D('',#34334,#34335,#34336); +#34334 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#34335 = DIRECTION('',(0.,1.,0.)); +#34336 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34337 = ADVANCED_FACE('',(#34338),#34356,.T.); +#34338 = FACE_BOUND('',#34339,.F.); +#34339 = EDGE_LOOP('',(#34340,#34348,#34349,#34350)); +#34340 = ORIENTED_EDGE('',*,*,#34341,.F.); +#34341 = EDGE_CURVE('',#34312,#34342,#34344,.T.); +#34342 = VERTEX_POINT('',#34343); +#34343 = CARTESIAN_POINT('',(8.150000023842,-7.89,-1.943111538E-06)); +#34344 = LINE('',#34345,#34346); +#34345 = CARTESIAN_POINT('',(8.150000023842,-6.99,-1.94311153833E-06)); +#34346 = VECTOR('',#34347,1.); +#34347 = DIRECTION('',(0.,-1.,0.)); +#34348 = ORIENTED_EDGE('',*,*,#34327,.T.); +#34349 = ORIENTED_EDGE('',*,*,#29755,.T.); +#34350 = ORIENTED_EDGE('',*,*,#34351,.F.); +#34351 = EDGE_CURVE('',#34342,#29748,#34352,.T.); +#34352 = LINE('',#34353,#34354); +#34353 = CARTESIAN_POINT('',(8.150000023842,-7.89,-1.94311153833E-06)); +#34354 = VECTOR('',#34355,1.); +#34355 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34356 = PLANE('',#34357); +#34357 = AXIS2_PLACEMENT_3D('',#34358,#34359,#34360); +#34358 = CARTESIAN_POINT('',(8.150000023842,-6.99,-1.94311153833E-06)); +#34359 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34360 = DIRECTION('',(0.,1.,0.)); +#34361 = ADVANCED_FACE('',(#34362),#34381,.T.); +#34362 = FACE_BOUND('',#34363,.F.); +#34363 = EDGE_LOOP('',(#34364,#34372,#34373,#34374,#34375)); +#34364 = ORIENTED_EDGE('',*,*,#34365,.F.); +#34365 = EDGE_CURVE('',#34342,#34366,#34368,.T.); +#34366 = VERTEX_POINT('',#34367); +#34367 = CARTESIAN_POINT('',(9.000000023842,-7.89,-2.145767343E-06)); +#34368 = LINE('',#34369,#34370); +#34369 = CARTESIAN_POINT('',(8.150000023842,-7.89,-1.94311153833E-06)); +#34370 = VECTOR('',#34371,1.); +#34371 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34372 = ORIENTED_EDGE('',*,*,#34351,.T.); +#34373 = ORIENTED_EDGE('',*,*,#29747,.F.); +#34374 = ORIENTED_EDGE('',*,*,#29739,.T.); +#34375 = ORIENTED_EDGE('',*,*,#34376,.F.); +#34376 = EDGE_CURVE('',#34366,#29732,#34377,.T.); +#34377 = LINE('',#34378,#34379); +#34378 = CARTESIAN_POINT('',(9.000000023842,-7.89,-2.14576734264E-06)); +#34379 = VECTOR('',#34380,1.); +#34380 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34381 = PLANE('',#34382); +#34382 = AXIS2_PLACEMENT_3D('',#34383,#34384,#34385); +#34383 = CARTESIAN_POINT('',(8.150000023842,-7.89,-1.94311153833E-06)); +#34384 = DIRECTION('',(0.,-1.,0.)); +#34385 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34386 = ADVANCED_FACE('',(#34387),#34419,.T.); +#34387 = FACE_BOUND('',#34388,.T.); +#34388 = EDGE_LOOP('',(#34389,#34390,#34398,#34404,#34405,#34413)); +#34389 = ORIENTED_EDGE('',*,*,#28947,.F.); +#34390 = ORIENTED_EDGE('',*,*,#34391,.F.); +#34391 = EDGE_CURVE('',#34392,#28948,#34394,.T.); +#34392 = VERTEX_POINT('',#34393); +#34393 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#34394 = LINE('',#34395,#34396); +#34395 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#34396 = VECTOR('',#34397,1.); +#34397 = DIRECTION('',(-0.,-0.,-1.)); +#34398 = ORIENTED_EDGE('',*,*,#34399,.F.); +#34399 = EDGE_CURVE('',#30919,#34392,#34400,.T.); +#34400 = LINE('',#34401,#34402); +#34401 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#34402 = VECTOR('',#34403,1.); +#34403 = DIRECTION('',(-0.,-0.,-1.)); +#34404 = ORIENTED_EDGE('',*,*,#30918,.T.); +#34405 = ORIENTED_EDGE('',*,*,#34406,.T.); +#34406 = EDGE_CURVE('',#30911,#34407,#34409,.T.); +#34407 = VERTEX_POINT('',#34408); +#34408 = CARTESIAN_POINT('',(-9.,-7.89,0.4)); +#34409 = LINE('',#34410,#34411); +#34410 = CARTESIAN_POINT('',(-9.,-7.89,0.8)); +#34411 = VECTOR('',#34412,1.); +#34412 = DIRECTION('',(-0.,-0.,-1.)); +#34413 = ORIENTED_EDGE('',*,*,#34414,.T.); +#34414 = EDGE_CURVE('',#34407,#28940,#34415,.T.); +#34415 = LINE('',#34416,#34417); +#34416 = CARTESIAN_POINT('',(-9.,-7.89,0.4)); +#34417 = VECTOR('',#34418,1.); +#34418 = DIRECTION('',(-0.,-0.,-1.)); +#34419 = PLANE('',#34420); +#34420 = AXIS2_PLACEMENT_3D('',#34421,#34422,#34423); +#34421 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34422 = DIRECTION('',(-1.,0.,0.)); +#34423 = DIRECTION('',(0.,1.,0.)); +#34424 = ADVANCED_FACE('',(#34425),#34473,.T.); +#34425 = FACE_BOUND('',#34426,.T.); +#34426 = EDGE_LOOP('',(#34427,#34428,#34436,#34444,#34450,#34451,#34459, + #34467)); +#34427 = ORIENTED_EDGE('',*,*,#29731,.F.); +#34428 = ORIENTED_EDGE('',*,*,#34429,.F.); +#34429 = EDGE_CURVE('',#34430,#29732,#34432,.T.); +#34430 = VERTEX_POINT('',#34431); +#34431 = CARTESIAN_POINT('',(9.,-7.89,0.4)); +#34432 = LINE('',#34433,#34434); +#34433 = CARTESIAN_POINT('',(9.,-7.89,0.4)); +#34434 = VECTOR('',#34435,1.); +#34435 = DIRECTION('',(0.,0.,-1.)); +#34436 = ORIENTED_EDGE('',*,*,#34437,.F.); +#34437 = EDGE_CURVE('',#34438,#34430,#34440,.T.); +#34438 = VERTEX_POINT('',#34439); +#34439 = CARTESIAN_POINT('',(9.000000214576,-7.89,0.799997854233)); +#34440 = LINE('',#34441,#34442); +#34441 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#34442 = VECTOR('',#34443,1.); +#34443 = DIRECTION('',(0.,0.,-1.)); +#34444 = ORIENTED_EDGE('',*,*,#34445,.F.); +#34445 = EDGE_CURVE('',#31447,#34438,#34446,.T.); +#34446 = LINE('',#34447,#34448); +#34447 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#34448 = VECTOR('',#34449,1.); +#34449 = DIRECTION('',(0.,0.,-1.)); +#34450 = ORIENTED_EDGE('',*,*,#31446,.T.); +#34451 = ORIENTED_EDGE('',*,*,#34452,.T.); +#34452 = EDGE_CURVE('',#31439,#34453,#34455,.T.); +#34453 = VERTEX_POINT('',#34454); +#34454 = CARTESIAN_POINT('',(9.000000214576,-8.26,0.799997854233)); +#34455 = LINE('',#34456,#34457); +#34456 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#34457 = VECTOR('',#34458,1.); +#34458 = DIRECTION('',(0.,0.,-1.)); +#34459 = ORIENTED_EDGE('',*,*,#34460,.T.); +#34460 = EDGE_CURVE('',#34453,#34461,#34463,.T.); +#34461 = VERTEX_POINT('',#34462); +#34462 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#34463 = LINE('',#34464,#34465); +#34464 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#34465 = VECTOR('',#34466,1.); +#34466 = DIRECTION('',(0.,0.,-1.)); +#34467 = ORIENTED_EDGE('',*,*,#34468,.T.); +#34468 = EDGE_CURVE('',#34461,#29724,#34469,.T.); +#34469 = LINE('',#34470,#34471); +#34470 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#34471 = VECTOR('',#34472,1.); +#34472 = DIRECTION('',(0.,0.,-1.)); +#34473 = PLANE('',#34474); +#34474 = AXIS2_PLACEMENT_3D('',#34475,#34476,#34477); +#34475 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34476 = DIRECTION('',(1.,0.,0.)); +#34477 = DIRECTION('',(0.,-1.,0.)); +#34478 = ADVANCED_FACE('',(#34479),#34509,.F.); +#34479 = FACE_BOUND('',#34480,.T.); +#34480 = EDGE_LOOP('',(#34481,#34492,#34498,#34499,#34500,#34501,#34502, + #34503)); +#34481 = ORIENTED_EDGE('',*,*,#34482,.T.); +#34482 = EDGE_CURVE('',#34483,#34485,#34487,.T.); +#34483 = VERTEX_POINT('',#34484); +#34484 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#34485 = VERTEX_POINT('',#34486); +#34486 = CARTESIAN_POINT('',(-9.,-8.435,0.)); +#34487 = CIRCLE('',#34488,0.275); +#34488 = AXIS2_PLACEMENT_3D('',#34489,#34490,#34491); +#34489 = CARTESIAN_POINT('',(-9.,-8.71,0.)); +#34490 = DIRECTION('',(0.,0.,1.)); +#34491 = DIRECTION('',(1.,0.,-0.)); +#34492 = ORIENTED_EDGE('',*,*,#34493,.F.); +#34493 = EDGE_CURVE('',#28948,#34485,#34494,.T.); +#34494 = LINE('',#34495,#34496); +#34495 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#34496 = VECTOR('',#34497,1.); +#34497 = DIRECTION('',(0.,-1.,0.)); +#34498 = ORIENTED_EDGE('',*,*,#28955,.T.); +#34499 = ORIENTED_EDGE('',*,*,#28963,.T.); +#34500 = ORIENTED_EDGE('',*,*,#28971,.T.); +#34501 = ORIENTED_EDGE('',*,*,#28979,.F.); +#34502 = ORIENTED_EDGE('',*,*,#28987,.T.); +#34503 = ORIENTED_EDGE('',*,*,#34504,.F.); +#34504 = EDGE_CURVE('',#34483,#28988,#34505,.T.); +#34505 = LINE('',#34506,#34507); +#34506 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#34507 = VECTOR('',#34508,1.); +#34508 = DIRECTION('',(0.,-1.,0.)); +#34509 = PLANE('',#34510); +#34510 = AXIS2_PLACEMENT_3D('',#34511,#34512,#34513); +#34511 = CARTESIAN_POINT('',(-8.571261896074,-8.71,0.)); +#34512 = DIRECTION('',(0.,0.,1.)); +#34513 = DIRECTION('',(1.,0.,-0.)); +#34514 = ADVANCED_FACE('',(#34515),#34541,.T.); +#34515 = FACE_BOUND('',#34516,.F.); +#34516 = EDGE_LOOP('',(#34517,#34527,#34533,#34534,#34535)); +#34517 = ORIENTED_EDGE('',*,*,#34518,.F.); +#34518 = EDGE_CURVE('',#34519,#34521,#34523,.T.); +#34519 = VERTEX_POINT('',#34520); +#34520 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.145767343E-06)); +#34521 = VERTEX_POINT('',#34522); +#34522 = CARTESIAN_POINT('',(8.150000023842,-8.26,-1.943111538E-06)); +#34523 = LINE('',#34524,#34525); +#34524 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#34525 = VECTOR('',#34526,1.); +#34526 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34527 = ORIENTED_EDGE('',*,*,#34528,.T.); +#34528 = EDGE_CURVE('',#34519,#29724,#34529,.T.); +#34529 = LINE('',#34530,#34531); +#34530 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#34531 = VECTOR('',#34532,1.); +#34532 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34533 = ORIENTED_EDGE('',*,*,#29723,.T.); +#34534 = ORIENTED_EDGE('',*,*,#29715,.T.); +#34535 = ORIENTED_EDGE('',*,*,#34536,.F.); +#34536 = EDGE_CURVE('',#34521,#29708,#34537,.T.); +#34537 = LINE('',#34538,#34539); +#34538 = CARTESIAN_POINT('',(8.150000023842,-8.26,-1.94311153833E-06)); +#34539 = VECTOR('',#34540,1.); +#34540 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34541 = PLANE('',#34542); +#34542 = AXIS2_PLACEMENT_3D('',#34543,#34544,#34545); +#34543 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#34544 = DIRECTION('',(0.,1.,0.)); +#34545 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34546 = ADVANCED_FACE('',(#34547),#34565,.T.); +#34547 = FACE_BOUND('',#34548,.F.); +#34548 = EDGE_LOOP('',(#34549,#34557,#34558,#34559)); +#34549 = ORIENTED_EDGE('',*,*,#34550,.F.); +#34550 = EDGE_CURVE('',#34521,#34551,#34553,.T.); +#34551 = VERTEX_POINT('',#34552); +#34552 = CARTESIAN_POINT('',(8.150000023842,-9.16,-1.943111538E-06)); +#34553 = LINE('',#34554,#34555); +#34554 = CARTESIAN_POINT('',(8.150000023842,-8.26,-1.94311153833E-06)); +#34555 = VECTOR('',#34556,1.); +#34556 = DIRECTION('',(0.,-1.,0.)); +#34557 = ORIENTED_EDGE('',*,*,#34536,.T.); +#34558 = ORIENTED_EDGE('',*,*,#29707,.T.); +#34559 = ORIENTED_EDGE('',*,*,#34560,.F.); +#34560 = EDGE_CURVE('',#34551,#29700,#34561,.T.); +#34561 = LINE('',#34562,#34563); +#34562 = CARTESIAN_POINT('',(8.150000023842,-9.16,-1.94311153833E-06)); +#34563 = VECTOR('',#34564,1.); +#34564 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34565 = PLANE('',#34566); +#34566 = AXIS2_PLACEMENT_3D('',#34567,#34568,#34569); +#34567 = CARTESIAN_POINT('',(8.150000023842,-8.26,-1.94311153833E-06)); +#34568 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34569 = DIRECTION('',(0.,1.,0.)); +#34570 = ADVANCED_FACE('',(#34571),#34590,.T.); +#34571 = FACE_BOUND('',#34572,.F.); +#34572 = EDGE_LOOP('',(#34573,#34581,#34582,#34583,#34584)); +#34573 = ORIENTED_EDGE('',*,*,#34574,.F.); +#34574 = EDGE_CURVE('',#34551,#34575,#34577,.T.); +#34575 = VERTEX_POINT('',#34576); +#34576 = CARTESIAN_POINT('',(9.000000023842,-9.16,-2.145767343E-06)); +#34577 = LINE('',#34578,#34579); +#34578 = CARTESIAN_POINT('',(8.150000023842,-9.16,-1.94311153833E-06)); +#34579 = VECTOR('',#34580,1.); +#34580 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34581 = ORIENTED_EDGE('',*,*,#34560,.T.); +#34582 = ORIENTED_EDGE('',*,*,#29699,.F.); +#34583 = ORIENTED_EDGE('',*,*,#29691,.T.); +#34584 = ORIENTED_EDGE('',*,*,#34585,.F.); +#34585 = EDGE_CURVE('',#34575,#29684,#34586,.T.); +#34586 = LINE('',#34587,#34588); +#34587 = CARTESIAN_POINT('',(9.000000023842,-9.16,-2.14576734264E-06)); +#34588 = VECTOR('',#34589,1.); +#34589 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34590 = PLANE('',#34591); +#34591 = AXIS2_PLACEMENT_3D('',#34592,#34593,#34594); +#34592 = CARTESIAN_POINT('',(8.150000023842,-9.16,-1.94311153833E-06)); +#34593 = DIRECTION('',(0.,-1.,0.)); +#34594 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34595 = ADVANCED_FACE('',(#34596),#34628,.T.); +#34596 = FACE_BOUND('',#34597,.T.); +#34597 = EDGE_LOOP('',(#34598,#34599,#34607,#34613,#34614,#34622)); +#34598 = ORIENTED_EDGE('',*,*,#28995,.F.); +#34599 = ORIENTED_EDGE('',*,*,#34600,.F.); +#34600 = EDGE_CURVE('',#34601,#28996,#34603,.T.); +#34601 = VERTEX_POINT('',#34602); +#34602 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#34603 = LINE('',#34604,#34605); +#34604 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#34605 = VECTOR('',#34606,1.); +#34606 = DIRECTION('',(-0.,-0.,-1.)); +#34607 = ORIENTED_EDGE('',*,*,#34608,.F.); +#34608 = EDGE_CURVE('',#30951,#34601,#34609,.T.); +#34609 = LINE('',#34610,#34611); +#34610 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#34611 = VECTOR('',#34612,1.); +#34612 = DIRECTION('',(-0.,-0.,-1.)); +#34613 = ORIENTED_EDGE('',*,*,#30950,.T.); +#34614 = ORIENTED_EDGE('',*,*,#34615,.T.); +#34615 = EDGE_CURVE('',#30943,#34616,#34618,.T.); +#34616 = VERTEX_POINT('',#34617); +#34617 = CARTESIAN_POINT('',(-9.,-9.16,0.4)); +#34618 = LINE('',#34619,#34620); +#34619 = CARTESIAN_POINT('',(-9.,-9.16,0.8)); +#34620 = VECTOR('',#34621,1.); +#34621 = DIRECTION('',(-0.,-0.,-1.)); +#34622 = ORIENTED_EDGE('',*,*,#34623,.T.); +#34623 = EDGE_CURVE('',#34616,#28988,#34624,.T.); +#34624 = LINE('',#34625,#34626); +#34625 = CARTESIAN_POINT('',(-9.,-9.16,0.4)); +#34626 = VECTOR('',#34627,1.); +#34627 = DIRECTION('',(-0.,-0.,-1.)); +#34628 = PLANE('',#34629); +#34629 = AXIS2_PLACEMENT_3D('',#34630,#34631,#34632); +#34630 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34631 = DIRECTION('',(-1.,0.,0.)); +#34632 = DIRECTION('',(0.,1.,0.)); +#34633 = ADVANCED_FACE('',(#34634),#34682,.T.); +#34634 = FACE_BOUND('',#34635,.T.); +#34635 = EDGE_LOOP('',(#34636,#34637,#34645,#34653,#34659,#34660,#34668, + #34676)); +#34636 = ORIENTED_EDGE('',*,*,#29683,.F.); +#34637 = ORIENTED_EDGE('',*,*,#34638,.F.); +#34638 = EDGE_CURVE('',#34639,#29684,#34641,.T.); +#34639 = VERTEX_POINT('',#34640); +#34640 = CARTESIAN_POINT('',(9.,-9.16,0.4)); +#34641 = LINE('',#34642,#34643); +#34642 = CARTESIAN_POINT('',(9.,-9.16,0.4)); +#34643 = VECTOR('',#34644,1.); +#34644 = DIRECTION('',(0.,0.,-1.)); +#34645 = ORIENTED_EDGE('',*,*,#34646,.F.); +#34646 = EDGE_CURVE('',#34647,#34639,#34649,.T.); +#34647 = VERTEX_POINT('',#34648); +#34648 = CARTESIAN_POINT('',(9.000000214576,-9.16,0.799997854233)); +#34649 = LINE('',#34650,#34651); +#34650 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#34651 = VECTOR('',#34652,1.); +#34652 = DIRECTION('',(0.,0.,-1.)); +#34653 = ORIENTED_EDGE('',*,*,#34654,.F.); +#34654 = EDGE_CURVE('',#31415,#34647,#34655,.T.); +#34655 = LINE('',#34656,#34657); +#34656 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#34657 = VECTOR('',#34658,1.); +#34658 = DIRECTION('',(0.,0.,-1.)); +#34659 = ORIENTED_EDGE('',*,*,#31414,.T.); +#34660 = ORIENTED_EDGE('',*,*,#34661,.T.); +#34661 = EDGE_CURVE('',#31407,#34662,#34664,.T.); +#34662 = VERTEX_POINT('',#34663); +#34663 = CARTESIAN_POINT('',(9.000000214576,-9.53,0.799997854233)); +#34664 = LINE('',#34665,#34666); +#34665 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#34666 = VECTOR('',#34667,1.); +#34667 = DIRECTION('',(0.,0.,-1.)); +#34668 = ORIENTED_EDGE('',*,*,#34669,.T.); +#34669 = EDGE_CURVE('',#34662,#34670,#34672,.T.); +#34670 = VERTEX_POINT('',#34671); +#34671 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#34672 = LINE('',#34673,#34674); +#34673 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#34674 = VECTOR('',#34675,1.); +#34675 = DIRECTION('',(0.,0.,-1.)); +#34676 = ORIENTED_EDGE('',*,*,#34677,.T.); +#34677 = EDGE_CURVE('',#34670,#29676,#34678,.T.); +#34678 = LINE('',#34679,#34680); +#34679 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#34680 = VECTOR('',#34681,1.); +#34681 = DIRECTION('',(0.,0.,-1.)); +#34682 = PLANE('',#34683); +#34683 = AXIS2_PLACEMENT_3D('',#34684,#34685,#34686); +#34684 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34685 = DIRECTION('',(1.,0.,0.)); +#34686 = DIRECTION('',(0.,-1.,0.)); +#34687 = ADVANCED_FACE('',(#34688),#34718,.F.); +#34688 = FACE_BOUND('',#34689,.T.); +#34689 = EDGE_LOOP('',(#34690,#34701,#34707,#34708,#34709,#34710,#34711, + #34712)); +#34690 = ORIENTED_EDGE('',*,*,#34691,.T.); +#34691 = EDGE_CURVE('',#34692,#34694,#34696,.T.); +#34692 = VERTEX_POINT('',#34693); +#34693 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#34694 = VERTEX_POINT('',#34695); +#34695 = CARTESIAN_POINT('',(-9.,-9.705,0.)); +#34696 = CIRCLE('',#34697,0.275); +#34697 = AXIS2_PLACEMENT_3D('',#34698,#34699,#34700); +#34698 = CARTESIAN_POINT('',(-9.,-9.98,0.)); +#34699 = DIRECTION('',(0.,0.,1.)); +#34700 = DIRECTION('',(1.,0.,-0.)); +#34701 = ORIENTED_EDGE('',*,*,#34702,.F.); +#34702 = EDGE_CURVE('',#28996,#34694,#34703,.T.); +#34703 = LINE('',#34704,#34705); +#34704 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#34705 = VECTOR('',#34706,1.); +#34706 = DIRECTION('',(0.,-1.,0.)); +#34707 = ORIENTED_EDGE('',*,*,#29003,.T.); +#34708 = ORIENTED_EDGE('',*,*,#29011,.T.); +#34709 = ORIENTED_EDGE('',*,*,#29019,.T.); +#34710 = ORIENTED_EDGE('',*,*,#29027,.F.); +#34711 = ORIENTED_EDGE('',*,*,#29035,.T.); +#34712 = ORIENTED_EDGE('',*,*,#34713,.F.); +#34713 = EDGE_CURVE('',#34692,#29036,#34714,.T.); +#34714 = LINE('',#34715,#34716); +#34715 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#34716 = VECTOR('',#34717,1.); +#34717 = DIRECTION('',(0.,-1.,0.)); +#34718 = PLANE('',#34719); +#34719 = AXIS2_PLACEMENT_3D('',#34720,#34721,#34722); +#34720 = CARTESIAN_POINT('',(-8.571261896074,-9.98,0.)); +#34721 = DIRECTION('',(0.,0.,1.)); +#34722 = DIRECTION('',(1.,0.,-0.)); +#34723 = ADVANCED_FACE('',(#34724),#34750,.T.); +#34724 = FACE_BOUND('',#34725,.F.); +#34725 = EDGE_LOOP('',(#34726,#34736,#34742,#34743,#34744)); +#34726 = ORIENTED_EDGE('',*,*,#34727,.F.); +#34727 = EDGE_CURVE('',#34728,#34730,#34732,.T.); +#34728 = VERTEX_POINT('',#34729); +#34729 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.145767343E-06)); +#34730 = VERTEX_POINT('',#34731); +#34731 = CARTESIAN_POINT('',(8.150000023842,-9.53,-1.943111538E-06)); +#34732 = LINE('',#34733,#34734); +#34733 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#34734 = VECTOR('',#34735,1.); +#34735 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34736 = ORIENTED_EDGE('',*,*,#34737,.T.); +#34737 = EDGE_CURVE('',#34728,#29676,#34738,.T.); +#34738 = LINE('',#34739,#34740); +#34739 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#34740 = VECTOR('',#34741,1.); +#34741 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34742 = ORIENTED_EDGE('',*,*,#29675,.T.); +#34743 = ORIENTED_EDGE('',*,*,#29667,.T.); +#34744 = ORIENTED_EDGE('',*,*,#34745,.F.); +#34745 = EDGE_CURVE('',#34730,#29660,#34746,.T.); +#34746 = LINE('',#34747,#34748); +#34747 = CARTESIAN_POINT('',(8.150000023842,-9.53,-1.94311153833E-06)); +#34748 = VECTOR('',#34749,1.); +#34749 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34750 = PLANE('',#34751); +#34751 = AXIS2_PLACEMENT_3D('',#34752,#34753,#34754); +#34752 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#34753 = DIRECTION('',(0.,1.,0.)); +#34754 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34755 = ADVANCED_FACE('',(#34756),#34774,.T.); +#34756 = FACE_BOUND('',#34757,.F.); +#34757 = EDGE_LOOP('',(#34758,#34766,#34767,#34768)); +#34758 = ORIENTED_EDGE('',*,*,#34759,.F.); +#34759 = EDGE_CURVE('',#34730,#34760,#34762,.T.); +#34760 = VERTEX_POINT('',#34761); +#34761 = CARTESIAN_POINT('',(8.150000023842,-10.43,-1.943111538E-06)); +#34762 = LINE('',#34763,#34764); +#34763 = CARTESIAN_POINT('',(8.150000023842,-9.53,-1.94311153833E-06)); +#34764 = VECTOR('',#34765,1.); +#34765 = DIRECTION('',(0.,-1.,0.)); +#34766 = ORIENTED_EDGE('',*,*,#34745,.T.); +#34767 = ORIENTED_EDGE('',*,*,#29659,.T.); +#34768 = ORIENTED_EDGE('',*,*,#34769,.F.); +#34769 = EDGE_CURVE('',#34760,#29652,#34770,.T.); +#34770 = LINE('',#34771,#34772); +#34771 = CARTESIAN_POINT('',(8.150000023842,-10.43,-1.94311153833E-06)); +#34772 = VECTOR('',#34773,1.); +#34773 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34774 = PLANE('',#34775); +#34775 = AXIS2_PLACEMENT_3D('',#34776,#34777,#34778); +#34776 = CARTESIAN_POINT('',(8.150000023842,-9.53,-1.94311153833E-06)); +#34777 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34778 = DIRECTION('',(0.,1.,0.)); +#34779 = ADVANCED_FACE('',(#34780),#34799,.T.); +#34780 = FACE_BOUND('',#34781,.F.); +#34781 = EDGE_LOOP('',(#34782,#34790,#34791,#34792,#34793)); +#34782 = ORIENTED_EDGE('',*,*,#34783,.F.); +#34783 = EDGE_CURVE('',#34760,#34784,#34786,.T.); +#34784 = VERTEX_POINT('',#34785); +#34785 = CARTESIAN_POINT('',(9.000000023842,-10.43,-2.145767343E-06)); +#34786 = LINE('',#34787,#34788); +#34787 = CARTESIAN_POINT('',(8.150000023842,-10.43,-1.94311153833E-06)); +#34788 = VECTOR('',#34789,1.); +#34789 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34790 = ORIENTED_EDGE('',*,*,#34769,.T.); +#34791 = ORIENTED_EDGE('',*,*,#29651,.F.); +#34792 = ORIENTED_EDGE('',*,*,#29643,.T.); +#34793 = ORIENTED_EDGE('',*,*,#34794,.F.); +#34794 = EDGE_CURVE('',#34784,#29636,#34795,.T.); +#34795 = LINE('',#34796,#34797); +#34796 = CARTESIAN_POINT('',(9.000000023842,-10.43,-2.14576734264E-06)); +#34797 = VECTOR('',#34798,1.); +#34798 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34799 = PLANE('',#34800); +#34800 = AXIS2_PLACEMENT_3D('',#34801,#34802,#34803); +#34801 = CARTESIAN_POINT('',(8.150000023842,-10.43,-1.94311153833E-06)); +#34802 = DIRECTION('',(0.,-1.,0.)); +#34803 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34804 = ADVANCED_FACE('',(#34805),#34837,.T.); +#34805 = FACE_BOUND('',#34806,.T.); +#34806 = EDGE_LOOP('',(#34807,#34808,#34816,#34822,#34823,#34831)); +#34807 = ORIENTED_EDGE('',*,*,#29043,.F.); +#34808 = ORIENTED_EDGE('',*,*,#34809,.F.); +#34809 = EDGE_CURVE('',#34810,#29044,#34812,.T.); +#34810 = VERTEX_POINT('',#34811); +#34811 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#34812 = LINE('',#34813,#34814); +#34813 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#34814 = VECTOR('',#34815,1.); +#34815 = DIRECTION('',(-0.,-0.,-1.)); +#34816 = ORIENTED_EDGE('',*,*,#34817,.F.); +#34817 = EDGE_CURVE('',#30983,#34810,#34818,.T.); +#34818 = LINE('',#34819,#34820); +#34819 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#34820 = VECTOR('',#34821,1.); +#34821 = DIRECTION('',(-0.,-0.,-1.)); +#34822 = ORIENTED_EDGE('',*,*,#30982,.T.); +#34823 = ORIENTED_EDGE('',*,*,#34824,.T.); +#34824 = EDGE_CURVE('',#30975,#34825,#34827,.T.); +#34825 = VERTEX_POINT('',#34826); +#34826 = CARTESIAN_POINT('',(-9.,-10.43,0.4)); +#34827 = LINE('',#34828,#34829); +#34828 = CARTESIAN_POINT('',(-9.,-10.43,0.8)); +#34829 = VECTOR('',#34830,1.); +#34830 = DIRECTION('',(-0.,-0.,-1.)); +#34831 = ORIENTED_EDGE('',*,*,#34832,.T.); +#34832 = EDGE_CURVE('',#34825,#29036,#34833,.T.); +#34833 = LINE('',#34834,#34835); +#34834 = CARTESIAN_POINT('',(-9.,-10.43,0.4)); +#34835 = VECTOR('',#34836,1.); +#34836 = DIRECTION('',(-0.,-0.,-1.)); +#34837 = PLANE('',#34838); +#34838 = AXIS2_PLACEMENT_3D('',#34839,#34840,#34841); +#34839 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34840 = DIRECTION('',(-1.,0.,0.)); +#34841 = DIRECTION('',(0.,1.,0.)); +#34842 = ADVANCED_FACE('',(#34843),#34891,.T.); +#34843 = FACE_BOUND('',#34844,.T.); +#34844 = EDGE_LOOP('',(#34845,#34846,#34854,#34862,#34868,#34869,#34877, + #34885)); +#34845 = ORIENTED_EDGE('',*,*,#29635,.F.); +#34846 = ORIENTED_EDGE('',*,*,#34847,.F.); +#34847 = EDGE_CURVE('',#34848,#29636,#34850,.T.); +#34848 = VERTEX_POINT('',#34849); +#34849 = CARTESIAN_POINT('',(9.,-10.43,0.4)); +#34850 = LINE('',#34851,#34852); +#34851 = CARTESIAN_POINT('',(9.,-10.43,0.4)); +#34852 = VECTOR('',#34853,1.); +#34853 = DIRECTION('',(0.,0.,-1.)); +#34854 = ORIENTED_EDGE('',*,*,#34855,.F.); +#34855 = EDGE_CURVE('',#34856,#34848,#34858,.T.); +#34856 = VERTEX_POINT('',#34857); +#34857 = CARTESIAN_POINT('',(9.000000214576,-10.43,0.799997854233)); +#34858 = LINE('',#34859,#34860); +#34859 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#34860 = VECTOR('',#34861,1.); +#34861 = DIRECTION('',(0.,0.,-1.)); +#34862 = ORIENTED_EDGE('',*,*,#34863,.F.); +#34863 = EDGE_CURVE('',#31383,#34856,#34864,.T.); +#34864 = LINE('',#34865,#34866); +#34865 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#34866 = VECTOR('',#34867,1.); +#34867 = DIRECTION('',(0.,0.,-1.)); +#34868 = ORIENTED_EDGE('',*,*,#31382,.T.); +#34869 = ORIENTED_EDGE('',*,*,#34870,.T.); +#34870 = EDGE_CURVE('',#31375,#34871,#34873,.T.); +#34871 = VERTEX_POINT('',#34872); +#34872 = CARTESIAN_POINT('',(9.000000214576,-10.8,0.799997854233)); +#34873 = LINE('',#34874,#34875); +#34874 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#34875 = VECTOR('',#34876,1.); +#34876 = DIRECTION('',(0.,0.,-1.)); +#34877 = ORIENTED_EDGE('',*,*,#34878,.T.); +#34878 = EDGE_CURVE('',#34871,#34879,#34881,.T.); +#34879 = VERTEX_POINT('',#34880); +#34880 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#34881 = LINE('',#34882,#34883); +#34882 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#34883 = VECTOR('',#34884,1.); +#34884 = DIRECTION('',(0.,0.,-1.)); +#34885 = ORIENTED_EDGE('',*,*,#34886,.T.); +#34886 = EDGE_CURVE('',#34879,#29628,#34887,.T.); +#34887 = LINE('',#34888,#34889); +#34888 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#34889 = VECTOR('',#34890,1.); +#34890 = DIRECTION('',(0.,0.,-1.)); +#34891 = PLANE('',#34892); +#34892 = AXIS2_PLACEMENT_3D('',#34893,#34894,#34895); +#34893 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34894 = DIRECTION('',(1.,0.,0.)); +#34895 = DIRECTION('',(0.,-1.,0.)); +#34896 = ADVANCED_FACE('',(#34897),#34927,.F.); +#34897 = FACE_BOUND('',#34898,.T.); +#34898 = EDGE_LOOP('',(#34899,#34910,#34916,#34917,#34918,#34919,#34920, + #34921)); +#34899 = ORIENTED_EDGE('',*,*,#34900,.T.); +#34900 = EDGE_CURVE('',#34901,#34903,#34905,.T.); +#34901 = VERTEX_POINT('',#34902); +#34902 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#34903 = VERTEX_POINT('',#34904); +#34904 = CARTESIAN_POINT('',(-9.,-10.975,0.)); +#34905 = CIRCLE('',#34906,0.275); +#34906 = AXIS2_PLACEMENT_3D('',#34907,#34908,#34909); +#34907 = CARTESIAN_POINT('',(-9.,-11.25,0.)); +#34908 = DIRECTION('',(0.,0.,1.)); +#34909 = DIRECTION('',(1.,0.,-0.)); +#34910 = ORIENTED_EDGE('',*,*,#34911,.F.); +#34911 = EDGE_CURVE('',#29044,#34903,#34912,.T.); +#34912 = LINE('',#34913,#34914); +#34913 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#34914 = VECTOR('',#34915,1.); +#34915 = DIRECTION('',(0.,-1.,0.)); +#34916 = ORIENTED_EDGE('',*,*,#29051,.T.); +#34917 = ORIENTED_EDGE('',*,*,#29059,.T.); +#34918 = ORIENTED_EDGE('',*,*,#29067,.T.); +#34919 = ORIENTED_EDGE('',*,*,#29075,.F.); +#34920 = ORIENTED_EDGE('',*,*,#29083,.T.); +#34921 = ORIENTED_EDGE('',*,*,#34922,.F.); +#34922 = EDGE_CURVE('',#34901,#29084,#34923,.T.); +#34923 = LINE('',#34924,#34925); +#34924 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#34925 = VECTOR('',#34926,1.); +#34926 = DIRECTION('',(0.,-1.,0.)); +#34927 = PLANE('',#34928); +#34928 = AXIS2_PLACEMENT_3D('',#34929,#34930,#34931); +#34929 = CARTESIAN_POINT('',(-8.571261896074,-11.25,0.)); +#34930 = DIRECTION('',(0.,0.,1.)); +#34931 = DIRECTION('',(1.,0.,-0.)); +#34932 = ADVANCED_FACE('',(#34933),#34959,.T.); +#34933 = FACE_BOUND('',#34934,.F.); +#34934 = EDGE_LOOP('',(#34935,#34945,#34951,#34952,#34953)); +#34935 = ORIENTED_EDGE('',*,*,#34936,.F.); +#34936 = EDGE_CURVE('',#34937,#34939,#34941,.T.); +#34937 = VERTEX_POINT('',#34938); +#34938 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.145767343E-06)); +#34939 = VERTEX_POINT('',#34940); +#34940 = CARTESIAN_POINT('',(8.150000023842,-10.8,-1.943111538E-06)); +#34941 = LINE('',#34942,#34943); +#34942 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#34943 = VECTOR('',#34944,1.); +#34944 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34945 = ORIENTED_EDGE('',*,*,#34946,.T.); +#34946 = EDGE_CURVE('',#34937,#29628,#34947,.T.); +#34947 = LINE('',#34948,#34949); +#34948 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#34949 = VECTOR('',#34950,1.); +#34950 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34951 = ORIENTED_EDGE('',*,*,#29627,.T.); +#34952 = ORIENTED_EDGE('',*,*,#29619,.T.); +#34953 = ORIENTED_EDGE('',*,*,#34954,.F.); +#34954 = EDGE_CURVE('',#34939,#29612,#34955,.T.); +#34955 = LINE('',#34956,#34957); +#34956 = CARTESIAN_POINT('',(8.150000023842,-10.8,-1.94311153833E-06)); +#34957 = VECTOR('',#34958,1.); +#34958 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34959 = PLANE('',#34960); +#34960 = AXIS2_PLACEMENT_3D('',#34961,#34962,#34963); +#34961 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#34962 = DIRECTION('',(0.,1.,0.)); +#34963 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34964 = ADVANCED_FACE('',(#34965),#34983,.T.); +#34965 = FACE_BOUND('',#34966,.F.); +#34966 = EDGE_LOOP('',(#34967,#34975,#34976,#34977)); +#34967 = ORIENTED_EDGE('',*,*,#34968,.F.); +#34968 = EDGE_CURVE('',#34939,#34969,#34971,.T.); +#34969 = VERTEX_POINT('',#34970); +#34970 = CARTESIAN_POINT('',(8.150000023842,-11.7,-1.943111538E-06)); +#34971 = LINE('',#34972,#34973); +#34972 = CARTESIAN_POINT('',(8.150000023842,-10.8,-1.94311153833E-06)); +#34973 = VECTOR('',#34974,1.); +#34974 = DIRECTION('',(0.,-1.,0.)); +#34975 = ORIENTED_EDGE('',*,*,#34954,.T.); +#34976 = ORIENTED_EDGE('',*,*,#29611,.T.); +#34977 = ORIENTED_EDGE('',*,*,#34978,.F.); +#34978 = EDGE_CURVE('',#34969,#29604,#34979,.T.); +#34979 = LINE('',#34980,#34981); +#34980 = CARTESIAN_POINT('',(8.150000023842,-11.7,-1.94311153833E-06)); +#34981 = VECTOR('',#34982,1.); +#34982 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34983 = PLANE('',#34984); +#34984 = AXIS2_PLACEMENT_3D('',#34985,#34986,#34987); +#34985 = CARTESIAN_POINT('',(8.150000023842,-10.8,-1.94311153833E-06)); +#34986 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34987 = DIRECTION('',(0.,1.,0.)); +#34988 = ADVANCED_FACE('',(#34989),#35008,.T.); +#34989 = FACE_BOUND('',#34990,.F.); +#34990 = EDGE_LOOP('',(#34991,#34999,#35000,#35001,#35002)); +#34991 = ORIENTED_EDGE('',*,*,#34992,.F.); +#34992 = EDGE_CURVE('',#34969,#34993,#34995,.T.); +#34993 = VERTEX_POINT('',#34994); +#34994 = CARTESIAN_POINT('',(9.000000023842,-11.7,-2.145767343E-06)); +#34995 = LINE('',#34996,#34997); +#34996 = CARTESIAN_POINT('',(8.150000023842,-11.7,-1.94311153833E-06)); +#34997 = VECTOR('',#34998,1.); +#34998 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34999 = ORIENTED_EDGE('',*,*,#34978,.T.); +#35000 = ORIENTED_EDGE('',*,*,#29603,.F.); +#35001 = ORIENTED_EDGE('',*,*,#29595,.T.); +#35002 = ORIENTED_EDGE('',*,*,#35003,.F.); +#35003 = EDGE_CURVE('',#34993,#29588,#35004,.T.); +#35004 = LINE('',#35005,#35006); +#35005 = CARTESIAN_POINT('',(9.000000023842,-11.7,-2.14576734264E-06)); +#35006 = VECTOR('',#35007,1.); +#35007 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35008 = PLANE('',#35009); +#35009 = AXIS2_PLACEMENT_3D('',#35010,#35011,#35012); +#35010 = CARTESIAN_POINT('',(8.150000023842,-11.7,-1.94311153833E-06)); +#35011 = DIRECTION('',(0.,-1.,0.)); +#35012 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35013 = ADVANCED_FACE('',(#35014),#35038,.T.); +#35014 = FACE_BOUND('',#35015,.T.); +#35015 = EDGE_LOOP('',(#35016,#35017,#35023,#35024,#35032)); +#35016 = ORIENTED_EDGE('',*,*,#29091,.F.); +#35017 = ORIENTED_EDGE('',*,*,#35018,.T.); +#35018 = EDGE_CURVE('',#29092,#31015,#35019,.T.); +#35019 = LINE('',#35020,#35021); +#35020 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35021 = VECTOR('',#35022,1.); +#35022 = DIRECTION('',(0.,0.,1.)); +#35023 = ORIENTED_EDGE('',*,*,#31014,.T.); +#35024 = ORIENTED_EDGE('',*,*,#35025,.T.); +#35025 = EDGE_CURVE('',#31007,#35026,#35028,.T.); +#35026 = VERTEX_POINT('',#35027); +#35027 = CARTESIAN_POINT('',(-9.,-11.7,0.4)); +#35028 = LINE('',#35029,#35030); +#35029 = CARTESIAN_POINT('',(-9.,-11.7,0.8)); +#35030 = VECTOR('',#35031,1.); +#35031 = DIRECTION('',(-0.,-0.,-1.)); +#35032 = ORIENTED_EDGE('',*,*,#35033,.T.); +#35033 = EDGE_CURVE('',#35026,#29084,#35034,.T.); +#35034 = LINE('',#35035,#35036); +#35035 = CARTESIAN_POINT('',(-9.,-11.7,0.4)); +#35036 = VECTOR('',#35037,1.); +#35037 = DIRECTION('',(-0.,-0.,-1.)); +#35038 = PLANE('',#35039); +#35039 = AXIS2_PLACEMENT_3D('',#35040,#35041,#35042); +#35040 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35041 = DIRECTION('',(-1.,0.,0.)); +#35042 = DIRECTION('',(0.,1.,0.)); +#35043 = ADVANCED_FACE('',(#35044),#35076,.T.); +#35044 = FACE_BOUND('',#35045,.T.); +#35045 = EDGE_LOOP('',(#35046,#35047,#35055,#35063,#35069,#35070)); +#35046 = ORIENTED_EDGE('',*,*,#29587,.F.); +#35047 = ORIENTED_EDGE('',*,*,#35048,.F.); +#35048 = EDGE_CURVE('',#35049,#29588,#35051,.T.); +#35049 = VERTEX_POINT('',#35050); +#35050 = CARTESIAN_POINT('',(9.,-11.7,0.4)); +#35051 = LINE('',#35052,#35053); +#35052 = CARTESIAN_POINT('',(9.,-11.7,0.4)); +#35053 = VECTOR('',#35054,1.); +#35054 = DIRECTION('',(0.,0.,-1.)); +#35055 = ORIENTED_EDGE('',*,*,#35056,.F.); +#35056 = EDGE_CURVE('',#35057,#35049,#35059,.T.); +#35057 = VERTEX_POINT('',#35058); +#35058 = CARTESIAN_POINT('',(9.000000214576,-11.7,0.799997854233)); +#35059 = LINE('',#35060,#35061); +#35060 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#35061 = VECTOR('',#35062,1.); +#35062 = DIRECTION('',(0.,0.,-1.)); +#35063 = ORIENTED_EDGE('',*,*,#35064,.F.); +#35064 = EDGE_CURVE('',#31351,#35057,#35065,.T.); +#35065 = LINE('',#35066,#35067); +#35066 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#35067 = VECTOR('',#35068,1.); +#35068 = DIRECTION('',(0.,0.,-1.)); +#35069 = ORIENTED_EDGE('',*,*,#31350,.T.); +#35070 = ORIENTED_EDGE('',*,*,#35071,.F.); +#35071 = EDGE_CURVE('',#29580,#31343,#35072,.T.); +#35072 = LINE('',#35073,#35074); +#35073 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35074 = VECTOR('',#35075,1.); +#35075 = DIRECTION('',(0.,0.,1.)); +#35076 = PLANE('',#35077); +#35077 = AXIS2_PLACEMENT_3D('',#35078,#35079,#35080); +#35078 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35079 = DIRECTION('',(1.,0.,0.)); +#35080 = DIRECTION('',(0.,-1.,0.)); +#35081 = ADVANCED_FACE('',(#35082),#35101,.T.); +#35082 = FACE_BOUND('',#35083,.T.); +#35083 = EDGE_LOOP('',(#35084,#35085,#35093,#35099,#35100)); +#35084 = ORIENTED_EDGE('',*,*,#29099,.F.); +#35085 = ORIENTED_EDGE('',*,*,#35086,.F.); +#35086 = EDGE_CURVE('',#35087,#29100,#35089,.T.); +#35087 = VERTEX_POINT('',#35088); +#35088 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#35089 = LINE('',#35090,#35091); +#35090 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#35091 = VECTOR('',#35092,1.); +#35092 = DIRECTION('',(-0.,-0.,-1.)); +#35093 = ORIENTED_EDGE('',*,*,#35094,.F.); +#35094 = EDGE_CURVE('',#31023,#35087,#35095,.T.); +#35095 = LINE('',#35096,#35097); +#35096 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#35097 = VECTOR('',#35098,1.); +#35098 = DIRECTION('',(-0.,-0.,-1.)); +#35099 = ORIENTED_EDGE('',*,*,#31022,.T.); +#35100 = ORIENTED_EDGE('',*,*,#35018,.F.); +#35101 = PLANE('',#35102); +#35102 = AXIS2_PLACEMENT_3D('',#35103,#35104,#35105); +#35103 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35104 = DIRECTION('',(0.,-1.,0.)); +#35105 = DIRECTION('',(-1.,0.,0.)); +#35106 = ADVANCED_FACE('',(#35107),#35126,.T.); +#35107 = FACE_BOUND('',#35108,.T.); +#35108 = EDGE_LOOP('',(#35109,#35110,#35111,#35112,#35120)); +#35109 = ORIENTED_EDGE('',*,*,#29579,.F.); +#35110 = ORIENTED_EDGE('',*,*,#35071,.T.); +#35111 = ORIENTED_EDGE('',*,*,#31342,.T.); +#35112 = ORIENTED_EDGE('',*,*,#35113,.T.); +#35113 = EDGE_CURVE('',#31335,#35114,#35116,.T.); +#35114 = VERTEX_POINT('',#35115); +#35115 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#35116 = LINE('',#35117,#35118); +#35117 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#35118 = VECTOR('',#35119,1.); +#35119 = DIRECTION('',(0.,0.,-1.)); +#35120 = ORIENTED_EDGE('',*,*,#35121,.T.); +#35121 = EDGE_CURVE('',#35114,#29572,#35122,.T.); +#35122 = LINE('',#35123,#35124); +#35123 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#35124 = VECTOR('',#35125,1.); +#35125 = DIRECTION('',(0.,0.,-1.)); +#35126 = PLANE('',#35127); +#35127 = AXIS2_PLACEMENT_3D('',#35128,#35129,#35130); +#35128 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35129 = DIRECTION('',(0.,-1.,0.)); +#35130 = DIRECTION('',(-1.,0.,0.)); +#35131 = ADVANCED_FACE('',(#35132),#35162,.F.); +#35132 = FACE_BOUND('',#35133,.T.); +#35133 = EDGE_LOOP('',(#35134,#35145,#35151,#35152,#35153,#35154,#35155, + #35156)); +#35134 = ORIENTED_EDGE('',*,*,#35135,.T.); +#35135 = EDGE_CURVE('',#35136,#35138,#35140,.T.); +#35136 = VERTEX_POINT('',#35137); +#35137 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#35138 = VERTEX_POINT('',#35139); +#35139 = CARTESIAN_POINT('',(-5.99,-12.75,0.)); +#35140 = CIRCLE('',#35141,0.275); +#35141 = AXIS2_PLACEMENT_3D('',#35142,#35143,#35144); +#35142 = CARTESIAN_POINT('',(-5.715,-12.75,0.)); +#35143 = DIRECTION('',(0.,-0.,1.)); +#35144 = DIRECTION('',(0.,1.,0.)); +#35145 = ORIENTED_EDGE('',*,*,#35146,.F.); +#35146 = EDGE_CURVE('',#29100,#35138,#35147,.T.); +#35147 = LINE('',#35148,#35149); +#35148 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#35149 = VECTOR('',#35150,1.); +#35150 = DIRECTION('',(1.,0.,0.)); +#35151 = ORIENTED_EDGE('',*,*,#29107,.T.); +#35152 = ORIENTED_EDGE('',*,*,#29115,.T.); +#35153 = ORIENTED_EDGE('',*,*,#29123,.T.); +#35154 = ORIENTED_EDGE('',*,*,#29131,.F.); +#35155 = ORIENTED_EDGE('',*,*,#29139,.T.); +#35156 = ORIENTED_EDGE('',*,*,#35157,.F.); +#35157 = EDGE_CURVE('',#35136,#29140,#35158,.T.); +#35158 = LINE('',#35159,#35160); +#35159 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#35160 = VECTOR('',#35161,1.); +#35161 = DIRECTION('',(1.,0.,0.)); +#35162 = PLANE('',#35163); +#35163 = AXIS2_PLACEMENT_3D('',#35164,#35165,#35166); +#35164 = CARTESIAN_POINT('',(-5.715,-12.32126189607,0.)); +#35165 = DIRECTION('',(0.,0.,1.)); +#35166 = DIRECTION('',(0.,1.,0.)); +#35167 = ADVANCED_FACE('',(#35168),#35198,.F.); +#35168 = FACE_BOUND('',#35169,.T.); +#35169 = EDGE_LOOP('',(#35170,#35181,#35187,#35188,#35189,#35190,#35191, + #35192)); +#35170 = ORIENTED_EDGE('',*,*,#35171,.T.); +#35171 = EDGE_CURVE('',#35172,#35174,#35176,.T.); +#35172 = VERTEX_POINT('',#35173); +#35173 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#35174 = VERTEX_POINT('',#35175); +#35175 = CARTESIAN_POINT('',(5.44,-12.75,0.)); +#35176 = CIRCLE('',#35177,0.275); +#35177 = AXIS2_PLACEMENT_3D('',#35178,#35179,#35180); +#35178 = CARTESIAN_POINT('',(5.715,-12.75,0.)); +#35179 = DIRECTION('',(0.,-0.,1.)); +#35180 = DIRECTION('',(0.,1.,0.)); +#35181 = ORIENTED_EDGE('',*,*,#35182,.F.); +#35182 = EDGE_CURVE('',#29532,#35174,#35183,.T.); +#35183 = LINE('',#35184,#35185); +#35184 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#35185 = VECTOR('',#35186,1.); +#35186 = DIRECTION('',(1.,0.,0.)); +#35187 = ORIENTED_EDGE('',*,*,#29539,.F.); +#35188 = ORIENTED_EDGE('',*,*,#29547,.T.); +#35189 = ORIENTED_EDGE('',*,*,#29555,.F.); +#35190 = ORIENTED_EDGE('',*,*,#29563,.F.); +#35191 = ORIENTED_EDGE('',*,*,#29571,.F.); +#35192 = ORIENTED_EDGE('',*,*,#35193,.F.); +#35193 = EDGE_CURVE('',#35172,#29572,#35194,.T.); +#35194 = LINE('',#35195,#35196); +#35195 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#35196 = VECTOR('',#35197,1.); +#35197 = DIRECTION('',(1.,0.,0.)); +#35198 = PLANE('',#35199); +#35199 = AXIS2_PLACEMENT_3D('',#35200,#35201,#35202); +#35200 = CARTESIAN_POINT('',(5.715,-12.32126189607,0.)); +#35201 = DIRECTION('',(0.,0.,1.)); +#35202 = DIRECTION('',(0.,1.,0.)); +#35203 = ADVANCED_FACE('',(#35204),#35236,.T.); +#35204 = FACE_BOUND('',#35205,.T.); +#35205 = EDGE_LOOP('',(#35206,#35207,#35215,#35221,#35222,#35230)); +#35206 = ORIENTED_EDGE('',*,*,#29147,.F.); +#35207 = ORIENTED_EDGE('',*,*,#35208,.F.); +#35208 = EDGE_CURVE('',#35209,#29148,#35211,.T.); +#35209 = VERTEX_POINT('',#35210); +#35210 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#35211 = LINE('',#35212,#35213); +#35212 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#35213 = VECTOR('',#35214,1.); +#35214 = DIRECTION('',(-0.,-0.,-1.)); +#35215 = ORIENTED_EDGE('',*,*,#35216,.F.); +#35216 = EDGE_CURVE('',#31055,#35209,#35217,.T.); +#35217 = LINE('',#35218,#35219); +#35218 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#35219 = VECTOR('',#35220,1.); +#35220 = DIRECTION('',(-0.,-0.,-1.)); +#35221 = ORIENTED_EDGE('',*,*,#31054,.T.); +#35222 = ORIENTED_EDGE('',*,*,#35223,.T.); +#35223 = EDGE_CURVE('',#31047,#35224,#35226,.T.); +#35224 = VERTEX_POINT('',#35225); +#35225 = CARTESIAN_POINT('',(-5.265,-12.75,0.4)); +#35226 = LINE('',#35227,#35228); +#35227 = CARTESIAN_POINT('',(-5.265,-12.75,0.8)); +#35228 = VECTOR('',#35229,1.); +#35229 = DIRECTION('',(-0.,-0.,-1.)); +#35230 = ORIENTED_EDGE('',*,*,#35231,.T.); +#35231 = EDGE_CURVE('',#35224,#29140,#35232,.T.); +#35232 = LINE('',#35233,#35234); +#35233 = CARTESIAN_POINT('',(-5.265,-12.75,0.4)); +#35234 = VECTOR('',#35235,1.); +#35235 = DIRECTION('',(-0.,-0.,-1.)); +#35236 = PLANE('',#35237); +#35237 = AXIS2_PLACEMENT_3D('',#35238,#35239,#35240); +#35238 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35239 = DIRECTION('',(0.,-1.,0.)); +#35240 = DIRECTION('',(-1.,0.,0.)); +#35241 = ADVANCED_FACE('',(#35242),#35274,.T.); +#35242 = FACE_BOUND('',#35243,.T.); +#35243 = EDGE_LOOP('',(#35244,#35245,#35253,#35259,#35260,#35268)); +#35244 = ORIENTED_EDGE('',*,*,#29531,.F.); +#35245 = ORIENTED_EDGE('',*,*,#35246,.F.); +#35246 = EDGE_CURVE('',#35247,#29532,#35249,.T.); +#35247 = VERTEX_POINT('',#35248); +#35248 = CARTESIAN_POINT('',(5.265,-12.75,0.4)); +#35249 = LINE('',#35250,#35251); +#35250 = CARTESIAN_POINT('',(5.265,-12.75,0.4)); +#35251 = VECTOR('',#35252,1.); +#35252 = DIRECTION('',(0.,0.,-1.)); +#35253 = ORIENTED_EDGE('',*,*,#35254,.F.); +#35254 = EDGE_CURVE('',#31311,#35247,#35255,.T.); +#35255 = LINE('',#35256,#35257); +#35256 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#35257 = VECTOR('',#35258,1.); +#35258 = DIRECTION('',(0.,0.,-1.)); +#35259 = ORIENTED_EDGE('',*,*,#31310,.T.); +#35260 = ORIENTED_EDGE('',*,*,#35261,.T.); +#35261 = EDGE_CURVE('',#31303,#35262,#35264,.T.); +#35262 = VERTEX_POINT('',#35263); +#35263 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#35264 = LINE('',#35265,#35266); +#35265 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#35266 = VECTOR('',#35267,1.); +#35267 = DIRECTION('',(0.,0.,-1.)); +#35268 = ORIENTED_EDGE('',*,*,#35269,.T.); +#35269 = EDGE_CURVE('',#35262,#29524,#35270,.T.); +#35270 = LINE('',#35271,#35272); +#35271 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#35272 = VECTOR('',#35273,1.); +#35273 = DIRECTION('',(0.,0.,-1.)); +#35274 = PLANE('',#35275); +#35275 = AXIS2_PLACEMENT_3D('',#35276,#35277,#35278); +#35276 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35277 = DIRECTION('',(0.,-1.,0.)); +#35278 = DIRECTION('',(-1.,0.,0.)); +#35279 = ADVANCED_FACE('',(#35280),#35310,.F.); +#35280 = FACE_BOUND('',#35281,.T.); +#35281 = EDGE_LOOP('',(#35282,#35293,#35299,#35300,#35301,#35302,#35303, + #35304)); +#35282 = ORIENTED_EDGE('',*,*,#35283,.T.); +#35283 = EDGE_CURVE('',#35284,#35286,#35288,.T.); +#35284 = VERTEX_POINT('',#35285); +#35285 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#35286 = VERTEX_POINT('',#35287); +#35287 = CARTESIAN_POINT('',(-4.72,-12.75,0.)); +#35288 = CIRCLE('',#35289,0.275); +#35289 = AXIS2_PLACEMENT_3D('',#35290,#35291,#35292); +#35290 = CARTESIAN_POINT('',(-4.445,-12.75,0.)); +#35291 = DIRECTION('',(0.,-0.,1.)); +#35292 = DIRECTION('',(0.,1.,0.)); +#35293 = ORIENTED_EDGE('',*,*,#35294,.F.); +#35294 = EDGE_CURVE('',#29148,#35286,#35295,.T.); +#35295 = LINE('',#35296,#35297); +#35296 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#35297 = VECTOR('',#35298,1.); +#35298 = DIRECTION('',(1.,0.,0.)); +#35299 = ORIENTED_EDGE('',*,*,#29155,.T.); +#35300 = ORIENTED_EDGE('',*,*,#29163,.T.); +#35301 = ORIENTED_EDGE('',*,*,#29171,.T.); +#35302 = ORIENTED_EDGE('',*,*,#29179,.F.); +#35303 = ORIENTED_EDGE('',*,*,#29187,.T.); +#35304 = ORIENTED_EDGE('',*,*,#35305,.F.); +#35305 = EDGE_CURVE('',#35284,#29188,#35306,.T.); +#35306 = LINE('',#35307,#35308); +#35307 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#35308 = VECTOR('',#35309,1.); +#35309 = DIRECTION('',(1.,0.,0.)); +#35310 = PLANE('',#35311); +#35311 = AXIS2_PLACEMENT_3D('',#35312,#35313,#35314); +#35312 = CARTESIAN_POINT('',(-4.445,-12.32126189607,0.)); +#35313 = DIRECTION('',(0.,0.,1.)); +#35314 = DIRECTION('',(0.,1.,0.)); +#35315 = ADVANCED_FACE('',(#35316),#35346,.F.); +#35316 = FACE_BOUND('',#35317,.T.); +#35317 = EDGE_LOOP('',(#35318,#35329,#35335,#35336,#35337,#35338,#35339, + #35340)); +#35318 = ORIENTED_EDGE('',*,*,#35319,.T.); +#35319 = EDGE_CURVE('',#35320,#35322,#35324,.T.); +#35320 = VERTEX_POINT('',#35321); +#35321 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#35322 = VERTEX_POINT('',#35323); +#35323 = CARTESIAN_POINT('',(4.17,-12.75,0.)); +#35324 = CIRCLE('',#35325,0.275); +#35325 = AXIS2_PLACEMENT_3D('',#35326,#35327,#35328); +#35326 = CARTESIAN_POINT('',(4.445,-12.75,0.)); +#35327 = DIRECTION('',(0.,-0.,1.)); +#35328 = DIRECTION('',(0.,1.,0.)); +#35329 = ORIENTED_EDGE('',*,*,#35330,.F.); +#35330 = EDGE_CURVE('',#29484,#35322,#35331,.T.); +#35331 = LINE('',#35332,#35333); +#35332 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#35333 = VECTOR('',#35334,1.); +#35334 = DIRECTION('',(1.,0.,0.)); +#35335 = ORIENTED_EDGE('',*,*,#29491,.F.); +#35336 = ORIENTED_EDGE('',*,*,#29499,.T.); +#35337 = ORIENTED_EDGE('',*,*,#29507,.F.); +#35338 = ORIENTED_EDGE('',*,*,#29515,.F.); +#35339 = ORIENTED_EDGE('',*,*,#29523,.F.); +#35340 = ORIENTED_EDGE('',*,*,#35341,.F.); +#35341 = EDGE_CURVE('',#35320,#29524,#35342,.T.); +#35342 = LINE('',#35343,#35344); +#35343 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#35344 = VECTOR('',#35345,1.); +#35345 = DIRECTION('',(1.,0.,0.)); +#35346 = PLANE('',#35347); +#35347 = AXIS2_PLACEMENT_3D('',#35348,#35349,#35350); +#35348 = CARTESIAN_POINT('',(4.445,-12.32126189607,0.)); +#35349 = DIRECTION('',(0.,0.,1.)); +#35350 = DIRECTION('',(0.,1.,0.)); +#35351 = ADVANCED_FACE('',(#35352),#35384,.T.); +#35352 = FACE_BOUND('',#35353,.T.); +#35353 = EDGE_LOOP('',(#35354,#35355,#35363,#35369,#35370,#35378)); +#35354 = ORIENTED_EDGE('',*,*,#29195,.F.); +#35355 = ORIENTED_EDGE('',*,*,#35356,.F.); +#35356 = EDGE_CURVE('',#35357,#29196,#35359,.T.); +#35357 = VERTEX_POINT('',#35358); +#35358 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#35359 = LINE('',#35360,#35361); +#35360 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#35361 = VECTOR('',#35362,1.); +#35362 = DIRECTION('',(-0.,-0.,-1.)); +#35363 = ORIENTED_EDGE('',*,*,#35364,.F.); +#35364 = EDGE_CURVE('',#31087,#35357,#35365,.T.); +#35365 = LINE('',#35366,#35367); +#35366 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#35367 = VECTOR('',#35368,1.); +#35368 = DIRECTION('',(-0.,-0.,-1.)); +#35369 = ORIENTED_EDGE('',*,*,#31086,.T.); +#35370 = ORIENTED_EDGE('',*,*,#35371,.T.); +#35371 = EDGE_CURVE('',#31079,#35372,#35374,.T.); +#35372 = VERTEX_POINT('',#35373); +#35373 = CARTESIAN_POINT('',(-3.995,-12.75,0.4)); +#35374 = LINE('',#35375,#35376); +#35375 = CARTESIAN_POINT('',(-3.995,-12.75,0.8)); +#35376 = VECTOR('',#35377,1.); +#35377 = DIRECTION('',(-0.,-0.,-1.)); +#35378 = ORIENTED_EDGE('',*,*,#35379,.T.); +#35379 = EDGE_CURVE('',#35372,#29188,#35380,.T.); +#35380 = LINE('',#35381,#35382); +#35381 = CARTESIAN_POINT('',(-3.995,-12.75,0.4)); +#35382 = VECTOR('',#35383,1.); +#35383 = DIRECTION('',(-0.,-0.,-1.)); +#35384 = PLANE('',#35385); +#35385 = AXIS2_PLACEMENT_3D('',#35386,#35387,#35388); +#35386 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35387 = DIRECTION('',(0.,-1.,0.)); +#35388 = DIRECTION('',(-1.,0.,0.)); +#35389 = ADVANCED_FACE('',(#35390),#35422,.T.); +#35390 = FACE_BOUND('',#35391,.T.); +#35391 = EDGE_LOOP('',(#35392,#35393,#35401,#35407,#35408,#35416)); +#35392 = ORIENTED_EDGE('',*,*,#29483,.F.); +#35393 = ORIENTED_EDGE('',*,*,#35394,.F.); +#35394 = EDGE_CURVE('',#35395,#29484,#35397,.T.); +#35395 = VERTEX_POINT('',#35396); +#35396 = CARTESIAN_POINT('',(3.995,-12.75,0.4)); +#35397 = LINE('',#35398,#35399); +#35398 = CARTESIAN_POINT('',(3.995,-12.75,0.4)); +#35399 = VECTOR('',#35400,1.); +#35400 = DIRECTION('',(0.,0.,-1.)); +#35401 = ORIENTED_EDGE('',*,*,#35402,.F.); +#35402 = EDGE_CURVE('',#31279,#35395,#35403,.T.); +#35403 = LINE('',#35404,#35405); +#35404 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#35405 = VECTOR('',#35406,1.); +#35406 = DIRECTION('',(0.,0.,-1.)); +#35407 = ORIENTED_EDGE('',*,*,#31278,.T.); +#35408 = ORIENTED_EDGE('',*,*,#35409,.T.); +#35409 = EDGE_CURVE('',#31271,#35410,#35412,.T.); +#35410 = VERTEX_POINT('',#35411); +#35411 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#35412 = LINE('',#35413,#35414); +#35413 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#35414 = VECTOR('',#35415,1.); +#35415 = DIRECTION('',(0.,0.,-1.)); +#35416 = ORIENTED_EDGE('',*,*,#35417,.T.); +#35417 = EDGE_CURVE('',#35410,#29476,#35418,.T.); +#35418 = LINE('',#35419,#35420); +#35419 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#35420 = VECTOR('',#35421,1.); +#35421 = DIRECTION('',(0.,0.,-1.)); +#35422 = PLANE('',#35423); +#35423 = AXIS2_PLACEMENT_3D('',#35424,#35425,#35426); +#35424 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35425 = DIRECTION('',(0.,-1.,0.)); +#35426 = DIRECTION('',(-1.,0.,0.)); +#35427 = ADVANCED_FACE('',(#35428),#35458,.F.); +#35428 = FACE_BOUND('',#35429,.T.); +#35429 = EDGE_LOOP('',(#35430,#35441,#35447,#35448,#35449,#35450,#35451, + #35452)); +#35430 = ORIENTED_EDGE('',*,*,#35431,.T.); +#35431 = EDGE_CURVE('',#35432,#35434,#35436,.T.); +#35432 = VERTEX_POINT('',#35433); +#35433 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#35434 = VERTEX_POINT('',#35435); +#35435 = CARTESIAN_POINT('',(-3.45,-12.75,0.)); +#35436 = CIRCLE('',#35437,0.275); +#35437 = AXIS2_PLACEMENT_3D('',#35438,#35439,#35440); +#35438 = CARTESIAN_POINT('',(-3.175,-12.75,0.)); +#35439 = DIRECTION('',(0.,-0.,1.)); +#35440 = DIRECTION('',(0.,1.,0.)); +#35441 = ORIENTED_EDGE('',*,*,#35442,.F.); +#35442 = EDGE_CURVE('',#29196,#35434,#35443,.T.); +#35443 = LINE('',#35444,#35445); +#35444 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#35445 = VECTOR('',#35446,1.); +#35446 = DIRECTION('',(1.,0.,0.)); +#35447 = ORIENTED_EDGE('',*,*,#29203,.T.); +#35448 = ORIENTED_EDGE('',*,*,#29211,.T.); +#35449 = ORIENTED_EDGE('',*,*,#29219,.T.); +#35450 = ORIENTED_EDGE('',*,*,#29227,.F.); +#35451 = ORIENTED_EDGE('',*,*,#29235,.T.); +#35452 = ORIENTED_EDGE('',*,*,#35453,.F.); +#35453 = EDGE_CURVE('',#35432,#29236,#35454,.T.); +#35454 = LINE('',#35455,#35456); +#35455 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#35456 = VECTOR('',#35457,1.); +#35457 = DIRECTION('',(1.,0.,0.)); +#35458 = PLANE('',#35459); +#35459 = AXIS2_PLACEMENT_3D('',#35460,#35461,#35462); +#35460 = CARTESIAN_POINT('',(-3.175,-12.32126189607,0.)); +#35461 = DIRECTION('',(0.,0.,1.)); +#35462 = DIRECTION('',(0.,1.,0.)); +#35463 = ADVANCED_FACE('',(#35464),#35494,.F.); +#35464 = FACE_BOUND('',#35465,.T.); +#35465 = EDGE_LOOP('',(#35466,#35477,#35483,#35484,#35485,#35486,#35487, + #35488)); +#35466 = ORIENTED_EDGE('',*,*,#35467,.T.); +#35467 = EDGE_CURVE('',#35468,#35470,#35472,.T.); +#35468 = VERTEX_POINT('',#35469); +#35469 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#35470 = VERTEX_POINT('',#35471); +#35471 = CARTESIAN_POINT('',(2.9,-12.75,0.)); +#35472 = CIRCLE('',#35473,0.275); +#35473 = AXIS2_PLACEMENT_3D('',#35474,#35475,#35476); +#35474 = CARTESIAN_POINT('',(3.175,-12.75,0.)); +#35475 = DIRECTION('',(0.,-0.,1.)); +#35476 = DIRECTION('',(0.,1.,0.)); +#35477 = ORIENTED_EDGE('',*,*,#35478,.F.); +#35478 = EDGE_CURVE('',#29436,#35470,#35479,.T.); +#35479 = LINE('',#35480,#35481); +#35480 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#35481 = VECTOR('',#35482,1.); +#35482 = DIRECTION('',(1.,0.,0.)); +#35483 = ORIENTED_EDGE('',*,*,#29443,.F.); +#35484 = ORIENTED_EDGE('',*,*,#29451,.T.); +#35485 = ORIENTED_EDGE('',*,*,#29459,.F.); +#35486 = ORIENTED_EDGE('',*,*,#29467,.F.); +#35487 = ORIENTED_EDGE('',*,*,#29475,.F.); +#35488 = ORIENTED_EDGE('',*,*,#35489,.F.); +#35489 = EDGE_CURVE('',#35468,#29476,#35490,.T.); +#35490 = LINE('',#35491,#35492); +#35491 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#35492 = VECTOR('',#35493,1.); +#35493 = DIRECTION('',(1.,0.,0.)); +#35494 = PLANE('',#35495); +#35495 = AXIS2_PLACEMENT_3D('',#35496,#35497,#35498); +#35496 = CARTESIAN_POINT('',(3.175,-12.32126189607,0.)); +#35497 = DIRECTION('',(0.,0.,1.)); +#35498 = DIRECTION('',(0.,1.,0.)); +#35499 = ADVANCED_FACE('',(#35500),#35532,.T.); +#35500 = FACE_BOUND('',#35501,.T.); +#35501 = EDGE_LOOP('',(#35502,#35503,#35511,#35517,#35518,#35526)); +#35502 = ORIENTED_EDGE('',*,*,#29243,.F.); +#35503 = ORIENTED_EDGE('',*,*,#35504,.F.); +#35504 = EDGE_CURVE('',#35505,#29244,#35507,.T.); +#35505 = VERTEX_POINT('',#35506); +#35506 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#35507 = LINE('',#35508,#35509); +#35508 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#35509 = VECTOR('',#35510,1.); +#35510 = DIRECTION('',(-0.,-0.,-1.)); +#35511 = ORIENTED_EDGE('',*,*,#35512,.F.); +#35512 = EDGE_CURVE('',#31119,#35505,#35513,.T.); +#35513 = LINE('',#35514,#35515); +#35514 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#35515 = VECTOR('',#35516,1.); +#35516 = DIRECTION('',(-0.,-0.,-1.)); +#35517 = ORIENTED_EDGE('',*,*,#31118,.T.); +#35518 = ORIENTED_EDGE('',*,*,#35519,.T.); +#35519 = EDGE_CURVE('',#31111,#35520,#35522,.T.); +#35520 = VERTEX_POINT('',#35521); +#35521 = CARTESIAN_POINT('',(-2.725,-12.75,0.4)); +#35522 = LINE('',#35523,#35524); +#35523 = CARTESIAN_POINT('',(-2.725,-12.75,0.8)); +#35524 = VECTOR('',#35525,1.); +#35525 = DIRECTION('',(-0.,-0.,-1.)); +#35526 = ORIENTED_EDGE('',*,*,#35527,.T.); +#35527 = EDGE_CURVE('',#35520,#29236,#35528,.T.); +#35528 = LINE('',#35529,#35530); +#35529 = CARTESIAN_POINT('',(-2.725,-12.75,0.4)); +#35530 = VECTOR('',#35531,1.); +#35531 = DIRECTION('',(-0.,-0.,-1.)); +#35532 = PLANE('',#35533); +#35533 = AXIS2_PLACEMENT_3D('',#35534,#35535,#35536); +#35534 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35535 = DIRECTION('',(0.,-1.,0.)); +#35536 = DIRECTION('',(-1.,0.,0.)); +#35537 = ADVANCED_FACE('',(#35538),#35570,.T.); +#35538 = FACE_BOUND('',#35539,.T.); +#35539 = EDGE_LOOP('',(#35540,#35541,#35549,#35555,#35556,#35564)); +#35540 = ORIENTED_EDGE('',*,*,#29435,.F.); +#35541 = ORIENTED_EDGE('',*,*,#35542,.F.); +#35542 = EDGE_CURVE('',#35543,#29436,#35545,.T.); +#35543 = VERTEX_POINT('',#35544); +#35544 = CARTESIAN_POINT('',(2.725,-12.75,0.4)); +#35545 = LINE('',#35546,#35547); +#35546 = CARTESIAN_POINT('',(2.725,-12.75,0.4)); +#35547 = VECTOR('',#35548,1.); +#35548 = DIRECTION('',(0.,0.,-1.)); +#35549 = ORIENTED_EDGE('',*,*,#35550,.F.); +#35550 = EDGE_CURVE('',#31247,#35543,#35551,.T.); +#35551 = LINE('',#35552,#35553); +#35552 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#35553 = VECTOR('',#35554,1.); +#35554 = DIRECTION('',(0.,0.,-1.)); +#35555 = ORIENTED_EDGE('',*,*,#31246,.T.); +#35556 = ORIENTED_EDGE('',*,*,#35557,.T.); +#35557 = EDGE_CURVE('',#31239,#35558,#35560,.T.); +#35558 = VERTEX_POINT('',#35559); +#35559 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#35560 = LINE('',#35561,#35562); +#35561 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#35562 = VECTOR('',#35563,1.); +#35563 = DIRECTION('',(0.,0.,-1.)); +#35564 = ORIENTED_EDGE('',*,*,#35565,.T.); +#35565 = EDGE_CURVE('',#35558,#29428,#35566,.T.); +#35566 = LINE('',#35567,#35568); +#35567 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#35568 = VECTOR('',#35569,1.); +#35569 = DIRECTION('',(0.,0.,-1.)); +#35570 = PLANE('',#35571); +#35571 = AXIS2_PLACEMENT_3D('',#35572,#35573,#35574); +#35572 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35573 = DIRECTION('',(0.,-1.,0.)); +#35574 = DIRECTION('',(-1.,0.,0.)); +#35575 = ADVANCED_FACE('',(#35576),#35606,.F.); +#35576 = FACE_BOUND('',#35577,.T.); +#35577 = EDGE_LOOP('',(#35578,#35589,#35595,#35596,#35597,#35598,#35599, + #35600)); +#35578 = ORIENTED_EDGE('',*,*,#35579,.T.); +#35579 = EDGE_CURVE('',#35580,#35582,#35584,.T.); +#35580 = VERTEX_POINT('',#35581); +#35581 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#35582 = VERTEX_POINT('',#35583); +#35583 = CARTESIAN_POINT('',(-2.18,-12.75,0.)); +#35584 = CIRCLE('',#35585,0.275); +#35585 = AXIS2_PLACEMENT_3D('',#35586,#35587,#35588); +#35586 = CARTESIAN_POINT('',(-1.905,-12.75,0.)); +#35587 = DIRECTION('',(0.,-0.,1.)); +#35588 = DIRECTION('',(0.,1.,0.)); +#35589 = ORIENTED_EDGE('',*,*,#35590,.F.); +#35590 = EDGE_CURVE('',#29244,#35582,#35591,.T.); +#35591 = LINE('',#35592,#35593); +#35592 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#35593 = VECTOR('',#35594,1.); +#35594 = DIRECTION('',(1.,0.,0.)); +#35595 = ORIENTED_EDGE('',*,*,#29251,.T.); +#35596 = ORIENTED_EDGE('',*,*,#29259,.T.); +#35597 = ORIENTED_EDGE('',*,*,#29267,.T.); +#35598 = ORIENTED_EDGE('',*,*,#29275,.F.); +#35599 = ORIENTED_EDGE('',*,*,#29283,.T.); +#35600 = ORIENTED_EDGE('',*,*,#35601,.F.); +#35601 = EDGE_CURVE('',#35580,#29284,#35602,.T.); +#35602 = LINE('',#35603,#35604); +#35603 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#35604 = VECTOR('',#35605,1.); +#35605 = DIRECTION('',(1.,0.,0.)); +#35606 = PLANE('',#35607); +#35607 = AXIS2_PLACEMENT_3D('',#35608,#35609,#35610); +#35608 = CARTESIAN_POINT('',(-1.905,-12.32126189607,0.)); +#35609 = DIRECTION('',(0.,0.,1.)); +#35610 = DIRECTION('',(0.,1.,0.)); +#35611 = ADVANCED_FACE('',(#35612),#35642,.F.); +#35612 = FACE_BOUND('',#35613,.T.); +#35613 = EDGE_LOOP('',(#35614,#35625,#35631,#35632,#35633,#35634,#35635, + #35636)); +#35614 = ORIENTED_EDGE('',*,*,#35615,.T.); +#35615 = EDGE_CURVE('',#35616,#35618,#35620,.T.); +#35616 = VERTEX_POINT('',#35617); +#35617 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#35618 = VERTEX_POINT('',#35619); +#35619 = CARTESIAN_POINT('',(1.63,-12.75,0.)); +#35620 = CIRCLE('',#35621,0.275); +#35621 = AXIS2_PLACEMENT_3D('',#35622,#35623,#35624); +#35622 = CARTESIAN_POINT('',(1.905,-12.75,0.)); +#35623 = DIRECTION('',(0.,-0.,1.)); +#35624 = DIRECTION('',(0.,1.,0.)); +#35625 = ORIENTED_EDGE('',*,*,#35626,.F.); +#35626 = EDGE_CURVE('',#29388,#35618,#35627,.T.); +#35627 = LINE('',#35628,#35629); +#35628 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#35629 = VECTOR('',#35630,1.); +#35630 = DIRECTION('',(1.,0.,0.)); +#35631 = ORIENTED_EDGE('',*,*,#29395,.F.); +#35632 = ORIENTED_EDGE('',*,*,#29403,.T.); +#35633 = ORIENTED_EDGE('',*,*,#29411,.F.); +#35634 = ORIENTED_EDGE('',*,*,#29419,.F.); +#35635 = ORIENTED_EDGE('',*,*,#29427,.F.); +#35636 = ORIENTED_EDGE('',*,*,#35637,.F.); +#35637 = EDGE_CURVE('',#35616,#29428,#35638,.T.); +#35638 = LINE('',#35639,#35640); +#35639 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#35640 = VECTOR('',#35641,1.); +#35641 = DIRECTION('',(1.,0.,0.)); +#35642 = PLANE('',#35643); +#35643 = AXIS2_PLACEMENT_3D('',#35644,#35645,#35646); +#35644 = CARTESIAN_POINT('',(1.905,-12.32126189607,0.)); +#35645 = DIRECTION('',(0.,0.,1.)); +#35646 = DIRECTION('',(0.,1.,0.)); +#35647 = ADVANCED_FACE('',(#35648),#35680,.T.); +#35648 = FACE_BOUND('',#35649,.T.); +#35649 = EDGE_LOOP('',(#35650,#35651,#35659,#35665,#35666,#35674)); +#35650 = ORIENTED_EDGE('',*,*,#29291,.F.); +#35651 = ORIENTED_EDGE('',*,*,#35652,.F.); +#35652 = EDGE_CURVE('',#35653,#29292,#35655,.T.); +#35653 = VERTEX_POINT('',#35654); +#35654 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#35655 = LINE('',#35656,#35657); +#35656 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#35657 = VECTOR('',#35658,1.); +#35658 = DIRECTION('',(-0.,-0.,-1.)); +#35659 = ORIENTED_EDGE('',*,*,#35660,.F.); +#35660 = EDGE_CURVE('',#31151,#35653,#35661,.T.); +#35661 = LINE('',#35662,#35663); +#35662 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#35663 = VECTOR('',#35664,1.); +#35664 = DIRECTION('',(-0.,-0.,-1.)); +#35665 = ORIENTED_EDGE('',*,*,#31150,.T.); +#35666 = ORIENTED_EDGE('',*,*,#35667,.T.); +#35667 = EDGE_CURVE('',#31143,#35668,#35670,.T.); +#35668 = VERTEX_POINT('',#35669); +#35669 = CARTESIAN_POINT('',(-1.455,-12.75,0.4)); +#35670 = LINE('',#35671,#35672); +#35671 = CARTESIAN_POINT('',(-1.455,-12.75,0.8)); +#35672 = VECTOR('',#35673,1.); +#35673 = DIRECTION('',(-0.,-0.,-1.)); +#35674 = ORIENTED_EDGE('',*,*,#35675,.T.); +#35675 = EDGE_CURVE('',#35668,#29284,#35676,.T.); +#35676 = LINE('',#35677,#35678); +#35677 = CARTESIAN_POINT('',(-1.455,-12.75,0.4)); +#35678 = VECTOR('',#35679,1.); +#35679 = DIRECTION('',(-0.,-0.,-1.)); +#35680 = PLANE('',#35681); +#35681 = AXIS2_PLACEMENT_3D('',#35682,#35683,#35684); +#35682 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35683 = DIRECTION('',(0.,-1.,0.)); +#35684 = DIRECTION('',(-1.,0.,0.)); +#35685 = ADVANCED_FACE('',(#35686),#35718,.T.); +#35686 = FACE_BOUND('',#35687,.T.); +#35687 = EDGE_LOOP('',(#35688,#35689,#35697,#35703,#35704,#35712)); +#35688 = ORIENTED_EDGE('',*,*,#29387,.F.); +#35689 = ORIENTED_EDGE('',*,*,#35690,.F.); +#35690 = EDGE_CURVE('',#35691,#29388,#35693,.T.); +#35691 = VERTEX_POINT('',#35692); +#35692 = CARTESIAN_POINT('',(1.455,-12.75,0.4)); +#35693 = LINE('',#35694,#35695); +#35694 = CARTESIAN_POINT('',(1.455,-12.75,0.4)); +#35695 = VECTOR('',#35696,1.); +#35696 = DIRECTION('',(0.,0.,-1.)); +#35697 = ORIENTED_EDGE('',*,*,#35698,.F.); +#35698 = EDGE_CURVE('',#31215,#35691,#35699,.T.); +#35699 = LINE('',#35700,#35701); +#35700 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#35701 = VECTOR('',#35702,1.); +#35702 = DIRECTION('',(0.,0.,-1.)); +#35703 = ORIENTED_EDGE('',*,*,#31214,.T.); +#35704 = ORIENTED_EDGE('',*,*,#35705,.T.); +#35705 = EDGE_CURVE('',#31207,#35706,#35708,.T.); +#35706 = VERTEX_POINT('',#35707); +#35707 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#35708 = LINE('',#35709,#35710); +#35709 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#35710 = VECTOR('',#35711,1.); +#35711 = DIRECTION('',(0.,0.,-1.)); +#35712 = ORIENTED_EDGE('',*,*,#35713,.T.); +#35713 = EDGE_CURVE('',#35706,#29380,#35714,.T.); +#35714 = LINE('',#35715,#35716); +#35715 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#35716 = VECTOR('',#35717,1.); +#35717 = DIRECTION('',(0.,0.,-1.)); +#35718 = PLANE('',#35719); +#35719 = AXIS2_PLACEMENT_3D('',#35720,#35721,#35722); +#35720 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35721 = DIRECTION('',(0.,-1.,0.)); +#35722 = DIRECTION('',(-1.,0.,0.)); +#35723 = ADVANCED_FACE('',(#35724),#35754,.F.); +#35724 = FACE_BOUND('',#35725,.T.); +#35725 = EDGE_LOOP('',(#35726,#35737,#35743,#35744,#35745,#35746,#35747, + #35748)); +#35726 = ORIENTED_EDGE('',*,*,#35727,.T.); +#35727 = EDGE_CURVE('',#35728,#35730,#35732,.T.); +#35728 = VERTEX_POINT('',#35729); +#35729 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#35730 = VERTEX_POINT('',#35731); +#35731 = CARTESIAN_POINT('',(-0.91,-12.75,0.)); +#35732 = CIRCLE('',#35733,0.275); +#35733 = AXIS2_PLACEMENT_3D('',#35734,#35735,#35736); +#35734 = CARTESIAN_POINT('',(-0.635,-12.75,0.)); +#35735 = DIRECTION('',(0.,-0.,1.)); +#35736 = DIRECTION('',(0.,1.,0.)); +#35737 = ORIENTED_EDGE('',*,*,#35738,.F.); +#35738 = EDGE_CURVE('',#29292,#35730,#35739,.T.); +#35739 = LINE('',#35740,#35741); +#35740 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#35741 = VECTOR('',#35742,1.); +#35742 = DIRECTION('',(1.,0.,0.)); +#35743 = ORIENTED_EDGE('',*,*,#29299,.T.); +#35744 = ORIENTED_EDGE('',*,*,#29307,.T.); +#35745 = ORIENTED_EDGE('',*,*,#29315,.T.); +#35746 = ORIENTED_EDGE('',*,*,#29323,.F.); +#35747 = ORIENTED_EDGE('',*,*,#29331,.T.); +#35748 = ORIENTED_EDGE('',*,*,#35749,.F.); +#35749 = EDGE_CURVE('',#35728,#29332,#35750,.T.); +#35750 = LINE('',#35751,#35752); +#35751 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#35752 = VECTOR('',#35753,1.); +#35753 = DIRECTION('',(1.,0.,0.)); +#35754 = PLANE('',#35755); +#35755 = AXIS2_PLACEMENT_3D('',#35756,#35757,#35758); +#35756 = CARTESIAN_POINT('',(-0.635,-12.32126189607,0.)); +#35757 = DIRECTION('',(0.,0.,1.)); +#35758 = DIRECTION('',(0.,1.,0.)); +#35759 = ADVANCED_FACE('',(#35760),#35790,.F.); +#35760 = FACE_BOUND('',#35761,.T.); +#35761 = EDGE_LOOP('',(#35762,#35773,#35779,#35780,#35781,#35782,#35783, + #35784)); +#35762 = ORIENTED_EDGE('',*,*,#35763,.T.); +#35763 = EDGE_CURVE('',#35764,#35766,#35768,.T.); +#35764 = VERTEX_POINT('',#35765); +#35765 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#35766 = VERTEX_POINT('',#35767); +#35767 = CARTESIAN_POINT('',(0.36,-12.75,0.)); +#35768 = CIRCLE('',#35769,0.275); +#35769 = AXIS2_PLACEMENT_3D('',#35770,#35771,#35772); +#35770 = CARTESIAN_POINT('',(0.635,-12.75,0.)); +#35771 = DIRECTION('',(0.,-0.,1.)); +#35772 = DIRECTION('',(0.,1.,0.)); +#35773 = ORIENTED_EDGE('',*,*,#35774,.F.); +#35774 = EDGE_CURVE('',#29340,#35766,#35775,.T.); +#35775 = LINE('',#35776,#35777); +#35776 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#35777 = VECTOR('',#35778,1.); +#35778 = DIRECTION('',(1.,0.,0.)); +#35779 = ORIENTED_EDGE('',*,*,#29347,.F.); +#35780 = ORIENTED_EDGE('',*,*,#29355,.T.); +#35781 = ORIENTED_EDGE('',*,*,#29363,.F.); +#35782 = ORIENTED_EDGE('',*,*,#29371,.F.); +#35783 = ORIENTED_EDGE('',*,*,#29379,.F.); +#35784 = ORIENTED_EDGE('',*,*,#35785,.F.); +#35785 = EDGE_CURVE('',#35764,#29380,#35786,.T.); +#35786 = LINE('',#35787,#35788); +#35787 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#35788 = VECTOR('',#35789,1.); +#35789 = DIRECTION('',(1.,0.,0.)); +#35790 = PLANE('',#35791); +#35791 = AXIS2_PLACEMENT_3D('',#35792,#35793,#35794); +#35792 = CARTESIAN_POINT('',(0.635,-12.32126189607,0.)); +#35793 = DIRECTION('',(0.,0.,1.)); +#35794 = DIRECTION('',(0.,1.,0.)); +#35795 = ADVANCED_FACE('',(#35796),#35828,.T.); +#35796 = FACE_BOUND('',#35797,.T.); +#35797 = EDGE_LOOP('',(#35798,#35799,#35807,#35813,#35814,#35822)); +#35798 = ORIENTED_EDGE('',*,*,#29339,.F.); +#35799 = ORIENTED_EDGE('',*,*,#35800,.F.); +#35800 = EDGE_CURVE('',#35801,#29340,#35803,.T.); +#35801 = VERTEX_POINT('',#35802); +#35802 = CARTESIAN_POINT('',(0.185,-12.75,0.4)); +#35803 = LINE('',#35804,#35805); +#35804 = CARTESIAN_POINT('',(0.185,-12.75,0.4)); +#35805 = VECTOR('',#35806,1.); +#35806 = DIRECTION('',(0.,0.,-1.)); +#35807 = ORIENTED_EDGE('',*,*,#35808,.F.); +#35808 = EDGE_CURVE('',#31183,#35801,#35809,.T.); +#35809 = LINE('',#35810,#35811); +#35810 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#35811 = VECTOR('',#35812,1.); +#35812 = DIRECTION('',(0.,0.,-1.)); +#35813 = ORIENTED_EDGE('',*,*,#31182,.T.); +#35814 = ORIENTED_EDGE('',*,*,#35815,.T.); +#35815 = EDGE_CURVE('',#31175,#35816,#35818,.T.); +#35816 = VERTEX_POINT('',#35817); +#35817 = CARTESIAN_POINT('',(-0.185,-12.75,0.4)); +#35818 = LINE('',#35819,#35820); +#35819 = CARTESIAN_POINT('',(-0.185,-12.75,0.8)); +#35820 = VECTOR('',#35821,1.); +#35821 = DIRECTION('',(-0.,-0.,-1.)); +#35822 = ORIENTED_EDGE('',*,*,#35823,.T.); +#35823 = EDGE_CURVE('',#35816,#29332,#35824,.T.); +#35824 = LINE('',#35825,#35826); +#35825 = CARTESIAN_POINT('',(-0.185,-12.75,0.4)); +#35826 = VECTOR('',#35827,1.); +#35827 = DIRECTION('',(-0.,-0.,-1.)); +#35828 = PLANE('',#35829); +#35829 = AXIS2_PLACEMENT_3D('',#35830,#35831,#35832); +#35830 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35831 = DIRECTION('',(0.,-1.,0.)); +#35832 = DIRECTION('',(-1.,0.,0.)); +#35833 = ADVANCED_FACE('',(#35834),#35840,.F.); +#35834 = FACE_BOUND('',#35835,.F.); +#35835 = EDGE_LOOP('',(#35836,#35837,#35838,#35839)); +#35836 = ORIENTED_EDGE('',*,*,#30286,.F.); +#35837 = ORIENTED_EDGE('',*,*,#30278,.F.); +#35838 = ORIENTED_EDGE('',*,*,#30270,.F.); +#35839 = ORIENTED_EDGE('',*,*,#30260,.F.); +#35840 = PLANE('',#35841); +#35841 = AXIS2_PLACEMENT_3D('',#35842,#35843,#35844); +#35842 = CARTESIAN_POINT('',(-2.9,-3.86,0.)); +#35843 = DIRECTION('',(0.,0.,1.)); +#35844 = DIRECTION('',(1.,0.,-0.)); +#35845 = ADVANCED_FACE('',(#35846),#35852,.F.); +#35846 = FACE_BOUND('',#35847,.F.); +#35847 = EDGE_LOOP('',(#35848,#35849,#35850,#35851)); +#35848 = ORIENTED_EDGE('',*,*,#30320,.F.); +#35849 = ORIENTED_EDGE('',*,*,#30312,.F.); +#35850 = ORIENTED_EDGE('',*,*,#30304,.F.); +#35851 = ORIENTED_EDGE('',*,*,#30294,.F.); +#35852 = PLANE('',#35853); +#35853 = AXIS2_PLACEMENT_3D('',#35854,#35855,#35856); +#35854 = CARTESIAN_POINT('',(-1.5,-3.86,0.)); +#35855 = DIRECTION('',(0.,0.,1.)); +#35856 = DIRECTION('',(1.,0.,-0.)); +#35857 = ADVANCED_FACE('',(#35858),#35864,.F.); +#35858 = FACE_BOUND('',#35859,.F.); +#35859 = EDGE_LOOP('',(#35860,#35861,#35862,#35863)); +#35860 = ORIENTED_EDGE('',*,*,#30354,.F.); +#35861 = ORIENTED_EDGE('',*,*,#30346,.F.); +#35862 = ORIENTED_EDGE('',*,*,#30338,.F.); +#35863 = ORIENTED_EDGE('',*,*,#30328,.F.); +#35864 = PLANE('',#35865); +#35865 = AXIS2_PLACEMENT_3D('',#35866,#35867,#35868); +#35866 = CARTESIAN_POINT('',(-0.1,-3.86,0.)); +#35867 = DIRECTION('',(0.,0.,1.)); +#35868 = DIRECTION('',(1.,0.,-0.)); +#35869 = ADVANCED_FACE('',(#35870),#35876,.F.); +#35870 = FACE_BOUND('',#35871,.F.); +#35871 = EDGE_LOOP('',(#35872,#35873,#35874,#35875)); +#35872 = ORIENTED_EDGE('',*,*,#30388,.F.); +#35873 = ORIENTED_EDGE('',*,*,#30380,.F.); +#35874 = ORIENTED_EDGE('',*,*,#30372,.F.); +#35875 = ORIENTED_EDGE('',*,*,#30362,.F.); +#35876 = PLANE('',#35877); +#35877 = AXIS2_PLACEMENT_3D('',#35878,#35879,#35880); +#35878 = CARTESIAN_POINT('',(-2.9,-2.46,0.)); +#35879 = DIRECTION('',(0.,0.,1.)); +#35880 = DIRECTION('',(1.,0.,-0.)); +#35881 = ADVANCED_FACE('',(#35882),#35888,.F.); +#35882 = FACE_BOUND('',#35883,.F.); +#35883 = EDGE_LOOP('',(#35884,#35885,#35886,#35887)); +#35884 = ORIENTED_EDGE('',*,*,#30422,.F.); +#35885 = ORIENTED_EDGE('',*,*,#30414,.F.); +#35886 = ORIENTED_EDGE('',*,*,#30406,.F.); +#35887 = ORIENTED_EDGE('',*,*,#30396,.F.); +#35888 = PLANE('',#35889); +#35889 = AXIS2_PLACEMENT_3D('',#35890,#35891,#35892); +#35890 = CARTESIAN_POINT('',(-1.5,-2.46,0.)); +#35891 = DIRECTION('',(0.,0.,1.)); +#35892 = DIRECTION('',(1.,0.,-0.)); +#35893 = ADVANCED_FACE('',(#35894),#35900,.F.); +#35894 = FACE_BOUND('',#35895,.F.); +#35895 = EDGE_LOOP('',(#35896,#35897,#35898,#35899)); +#35896 = ORIENTED_EDGE('',*,*,#30456,.F.); +#35897 = ORIENTED_EDGE('',*,*,#30448,.F.); +#35898 = ORIENTED_EDGE('',*,*,#30440,.F.); +#35899 = ORIENTED_EDGE('',*,*,#30430,.F.); +#35900 = PLANE('',#35901); +#35901 = AXIS2_PLACEMENT_3D('',#35902,#35903,#35904); +#35902 = CARTESIAN_POINT('',(-2.9,-1.06,0.)); +#35903 = DIRECTION('',(0.,0.,1.)); +#35904 = DIRECTION('',(1.,0.,-0.)); +#35905 = ADVANCED_FACE('',(#35906),#35912,.F.); +#35906 = FACE_BOUND('',#35907,.F.); +#35907 = EDGE_LOOP('',(#35908,#35909,#35910,#35911)); +#35908 = ORIENTED_EDGE('',*,*,#30490,.F.); +#35909 = ORIENTED_EDGE('',*,*,#30482,.F.); +#35910 = ORIENTED_EDGE('',*,*,#30474,.F.); +#35911 = ORIENTED_EDGE('',*,*,#30464,.F.); +#35912 = PLANE('',#35913); +#35913 = AXIS2_PLACEMENT_3D('',#35914,#35915,#35916); +#35914 = CARTESIAN_POINT('',(-1.5,-1.06,0.)); +#35915 = DIRECTION('',(0.,0.,1.)); +#35916 = DIRECTION('',(1.,0.,-0.)); +#35917 = ADVANCED_FACE('',(#35918),#35924,.F.); +#35918 = FACE_BOUND('',#35919,.F.); +#35919 = EDGE_LOOP('',(#35920,#35921,#35922,#35923)); +#35920 = ORIENTED_EDGE('',*,*,#30524,.F.); +#35921 = ORIENTED_EDGE('',*,*,#30516,.F.); +#35922 = ORIENTED_EDGE('',*,*,#30508,.F.); +#35923 = ORIENTED_EDGE('',*,*,#30498,.F.); +#35924 = PLANE('',#35925); +#35925 = AXIS2_PLACEMENT_3D('',#35926,#35927,#35928); +#35926 = CARTESIAN_POINT('',(-0.1,-2.46,0.)); +#35927 = DIRECTION('',(0.,0.,1.)); +#35928 = DIRECTION('',(1.,0.,-0.)); +#35929 = ADVANCED_FACE('',(#35930),#35936,.F.); +#35930 = FACE_BOUND('',#35931,.F.); +#35931 = EDGE_LOOP('',(#35932,#35933,#35934,#35935)); +#35932 = ORIENTED_EDGE('',*,*,#30558,.F.); +#35933 = ORIENTED_EDGE('',*,*,#30550,.F.); +#35934 = ORIENTED_EDGE('',*,*,#30542,.F.); +#35935 = ORIENTED_EDGE('',*,*,#30532,.F.); +#35936 = PLANE('',#35937); +#35937 = AXIS2_PLACEMENT_3D('',#35938,#35939,#35940); +#35938 = CARTESIAN_POINT('',(-0.1,-1.06,0.)); +#35939 = DIRECTION('',(0.,0.,1.)); +#35940 = DIRECTION('',(1.,0.,-0.)); +#35941 = ADVANCED_FACE('',(#35942),#35963,.T.); +#35942 = FACE_BOUND('',#35943,.T.); +#35943 = EDGE_LOOP('',(#35944,#35953,#35959,#35960,#35961,#35962)); +#35944 = ORIENTED_EDGE('',*,*,#35945,.F.); +#35945 = EDGE_CURVE('',#35946,#32104,#35948,.T.); +#35946 = VERTEX_POINT('',#35947); +#35947 = CARTESIAN_POINT('',(-9.,4.985,0.8)); +#35948 = CIRCLE('',#35949,0.275); +#35949 = AXIS2_PLACEMENT_3D('',#35950,#35951,#35952); +#35950 = CARTESIAN_POINT('',(-9.,5.26,0.8)); +#35951 = DIRECTION('',(0.,0.,1.)); +#35952 = DIRECTION('',(1.,0.,-0.)); +#35953 = ORIENTED_EDGE('',*,*,#35954,.T.); +#35954 = EDGE_CURVE('',#35946,#30591,#35955,.T.); +#35955 = LINE('',#35956,#35957); +#35956 = CARTESIAN_POINT('',(-9.,4.985,0.8)); +#35957 = VECTOR('',#35958,1.); +#35958 = DIRECTION('',(0.,-1.,0.)); +#35959 = ORIENTED_EDGE('',*,*,#30590,.F.); +#35960 = ORIENTED_EDGE('',*,*,#30582,.F.); +#35961 = ORIENTED_EDGE('',*,*,#30574,.F.); +#35962 = ORIENTED_EDGE('',*,*,#32103,.T.); +#35963 = PLANE('',#35964); +#35964 = AXIS2_PLACEMENT_3D('',#35965,#35966,#35967); +#35965 = CARTESIAN_POINT('',(-8.571261896074,5.26,0.8)); +#35966 = DIRECTION('',(0.,0.,1.)); +#35967 = DIRECTION('',(1.,0.,-0.)); +#35968 = ADVANCED_FACE('',(#35969),#35987,.T.); +#35969 = FACE_BOUND('',#35970,.F.); +#35970 = EDGE_LOOP('',(#35971,#35972,#35973,#35981)); +#35971 = ORIENTED_EDGE('',*,*,#31782,.F.); +#35972 = ORIENTED_EDGE('',*,*,#32183,.T.); +#35973 = ORIENTED_EDGE('',*,*,#35974,.T.); +#35974 = EDGE_CURVE('',#32176,#35975,#35977,.T.); +#35975 = VERTEX_POINT('',#35976); +#35976 = CARTESIAN_POINT('',(8.550000214576,4.81,0.799997961521)); +#35977 = LINE('',#35978,#35979); +#35978 = CARTESIAN_POINT('',(8.550000214576,5.71,0.799997961521)); +#35979 = VECTOR('',#35980,1.); +#35980 = DIRECTION('',(0.,-1.,0.)); +#35981 = ORIENTED_EDGE('',*,*,#35982,.F.); +#35982 = EDGE_CURVE('',#31775,#35975,#35983,.T.); +#35983 = LINE('',#35984,#35985); +#35984 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#35985 = VECTOR('',#35986,1.); +#35986 = DIRECTION('',(0.,0.,-1.)); +#35987 = PLANE('',#35988); +#35988 = AXIS2_PLACEMENT_3D('',#35989,#35990,#35991); +#35989 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#35990 = DIRECTION('',(1.,0.,0.)); +#35991 = DIRECTION('',(-0.,1.,0.)); +#35992 = ADVANCED_FACE('',(#35993),#36004,.T.); +#35993 = FACE_BOUND('',#35994,.F.); +#35994 = EDGE_LOOP('',(#35995,#35996,#35997,#36003)); +#35995 = ORIENTED_EDGE('',*,*,#31774,.F.); +#35996 = ORIENTED_EDGE('',*,*,#35982,.T.); +#35997 = ORIENTED_EDGE('',*,*,#35998,.T.); +#35998 = EDGE_CURVE('',#35975,#32348,#35999,.T.); +#35999 = LINE('',#36000,#36001); +#36000 = CARTESIAN_POINT('',(8.150000214577,4.81,0.799998056888)); +#36001 = VECTOR('',#36002,1.); +#36002 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36003 = ORIENTED_EDGE('',*,*,#32355,.F.); +#36004 = PLANE('',#36005); +#36005 = AXIS2_PLACEMENT_3D('',#36006,#36007,#36008); +#36006 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#36007 = DIRECTION('',(0.,1.,0.)); +#36008 = DIRECTION('',(-1.,0.,0.)); +#36009 = ADVANCED_FACE('',(#36010),#36038,.T.); +#36010 = FACE_BOUND('',#36011,.T.); +#36011 = EDGE_LOOP('',(#36012,#36023,#36029,#36030,#36031,#36032)); +#36012 = ORIENTED_EDGE('',*,*,#36013,.F.); +#36013 = EDGE_CURVE('',#36014,#36016,#36018,.T.); +#36014 = VERTEX_POINT('',#36015); +#36015 = CARTESIAN_POINT('',(-9.,3.715,0.8)); +#36016 = VERTEX_POINT('',#36017); +#36017 = CARTESIAN_POINT('',(-9.,4.265,0.8)); +#36018 = CIRCLE('',#36019,0.275); +#36019 = AXIS2_PLACEMENT_3D('',#36020,#36021,#36022); +#36020 = CARTESIAN_POINT('',(-9.,3.99,0.8)); +#36021 = DIRECTION('',(0.,0.,1.)); +#36022 = DIRECTION('',(1.,0.,-0.)); +#36023 = ORIENTED_EDGE('',*,*,#36024,.T.); +#36024 = EDGE_CURVE('',#36014,#30623,#36025,.T.); +#36025 = LINE('',#36026,#36027); +#36026 = CARTESIAN_POINT('',(-9.,3.715,0.8)); +#36027 = VECTOR('',#36028,1.); +#36028 = DIRECTION('',(0.,-1.,0.)); +#36029 = ORIENTED_EDGE('',*,*,#30622,.F.); +#36030 = ORIENTED_EDGE('',*,*,#30614,.F.); +#36031 = ORIENTED_EDGE('',*,*,#30606,.F.); +#36032 = ORIENTED_EDGE('',*,*,#36033,.T.); +#36033 = EDGE_CURVE('',#30599,#36016,#36034,.T.); +#36034 = LINE('',#36035,#36036); +#36035 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#36036 = VECTOR('',#36037,1.); +#36037 = DIRECTION('',(0.,-1.,0.)); +#36038 = PLANE('',#36039); +#36039 = AXIS2_PLACEMENT_3D('',#36040,#36041,#36042); +#36040 = CARTESIAN_POINT('',(-8.571261896074,3.99,0.8)); +#36041 = DIRECTION('',(0.,0.,1.)); +#36042 = DIRECTION('',(1.,0.,-0.)); +#36043 = ADVANCED_FACE('',(#36044),#36062,.T.); +#36044 = FACE_BOUND('',#36045,.F.); +#36045 = EDGE_LOOP('',(#36046,#36047,#36048,#36056)); +#36046 = ORIENTED_EDGE('',*,*,#31758,.F.); +#36047 = ORIENTED_EDGE('',*,*,#32362,.T.); +#36048 = ORIENTED_EDGE('',*,*,#36049,.T.); +#36049 = EDGE_CURVE('',#32363,#36050,#36052,.T.); +#36050 = VERTEX_POINT('',#36051); +#36051 = CARTESIAN_POINT('',(8.550000214576,4.44,0.799997961521)); +#36052 = LINE('',#36053,#36054); +#36053 = CARTESIAN_POINT('',(9.000000214576,4.44,0.799997854233)); +#36054 = VECTOR('',#36055,1.); +#36055 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36056 = ORIENTED_EDGE('',*,*,#36057,.F.); +#36057 = EDGE_CURVE('',#31751,#36050,#36058,.T.); +#36058 = LINE('',#36059,#36060); +#36059 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#36060 = VECTOR('',#36061,1.); +#36061 = DIRECTION('',(0.,0.,-1.)); +#36062 = PLANE('',#36063); +#36063 = AXIS2_PLACEMENT_3D('',#36064,#36065,#36066); +#36064 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#36065 = DIRECTION('',(-0.,-1.,-0.)); +#36066 = DIRECTION('',(1.,-0.,0.)); +#36067 = ADVANCED_FACE('',(#36068),#36086,.T.); +#36068 = FACE_BOUND('',#36069,.F.); +#36069 = EDGE_LOOP('',(#36070,#36071,#36072,#36080)); +#36070 = ORIENTED_EDGE('',*,*,#31750,.F.); +#36071 = ORIENTED_EDGE('',*,*,#36057,.T.); +#36072 = ORIENTED_EDGE('',*,*,#36073,.T.); +#36073 = EDGE_CURVE('',#36050,#36074,#36076,.T.); +#36074 = VERTEX_POINT('',#36075); +#36075 = CARTESIAN_POINT('',(8.550000214576,3.54,0.799997961521)); +#36076 = LINE('',#36077,#36078); +#36077 = CARTESIAN_POINT('',(8.550000214576,4.44,0.799997961521)); +#36078 = VECTOR('',#36079,1.); +#36079 = DIRECTION('',(0.,-1.,0.)); +#36080 = ORIENTED_EDGE('',*,*,#36081,.F.); +#36081 = EDGE_CURVE('',#31743,#36074,#36082,.T.); +#36082 = LINE('',#36083,#36084); +#36083 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#36084 = VECTOR('',#36085,1.); +#36085 = DIRECTION('',(0.,0.,-1.)); +#36086 = PLANE('',#36087); +#36087 = AXIS2_PLACEMENT_3D('',#36088,#36089,#36090); +#36088 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#36089 = DIRECTION('',(1.,0.,0.)); +#36090 = DIRECTION('',(-0.,1.,0.)); +#36091 = ADVANCED_FACE('',(#36092),#36103,.T.); +#36092 = FACE_BOUND('',#36093,.F.); +#36093 = EDGE_LOOP('',(#36094,#36095,#36096,#36102)); +#36094 = ORIENTED_EDGE('',*,*,#31742,.F.); +#36095 = ORIENTED_EDGE('',*,*,#36081,.T.); +#36096 = ORIENTED_EDGE('',*,*,#36097,.T.); +#36097 = EDGE_CURVE('',#36074,#32557,#36098,.T.); +#36098 = LINE('',#36099,#36100); +#36099 = CARTESIAN_POINT('',(8.150000214577,3.54,0.799998056888)); +#36100 = VECTOR('',#36101,1.); +#36101 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36102 = ORIENTED_EDGE('',*,*,#32564,.F.); +#36103 = PLANE('',#36104); +#36104 = AXIS2_PLACEMENT_3D('',#36105,#36106,#36107); +#36105 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#36106 = DIRECTION('',(0.,1.,0.)); +#36107 = DIRECTION('',(-1.,0.,0.)); +#36108 = ADVANCED_FACE('',(#36109),#36137,.T.); +#36109 = FACE_BOUND('',#36110,.T.); +#36110 = EDGE_LOOP('',(#36111,#36122,#36128,#36129,#36130,#36131)); +#36111 = ORIENTED_EDGE('',*,*,#36112,.F.); +#36112 = EDGE_CURVE('',#36113,#36115,#36117,.T.); +#36113 = VERTEX_POINT('',#36114); +#36114 = CARTESIAN_POINT('',(-9.,2.445,0.8)); +#36115 = VERTEX_POINT('',#36116); +#36116 = CARTESIAN_POINT('',(-9.,2.995,0.8)); +#36117 = CIRCLE('',#36118,0.275); +#36118 = AXIS2_PLACEMENT_3D('',#36119,#36120,#36121); +#36119 = CARTESIAN_POINT('',(-9.,2.72,0.8)); +#36120 = DIRECTION('',(0.,0.,1.)); +#36121 = DIRECTION('',(1.,0.,-0.)); +#36122 = ORIENTED_EDGE('',*,*,#36123,.T.); +#36123 = EDGE_CURVE('',#36113,#30655,#36124,.T.); +#36124 = LINE('',#36125,#36126); +#36125 = CARTESIAN_POINT('',(-9.,2.445,0.8)); +#36126 = VECTOR('',#36127,1.); +#36127 = DIRECTION('',(0.,-1.,0.)); +#36128 = ORIENTED_EDGE('',*,*,#30654,.F.); +#36129 = ORIENTED_EDGE('',*,*,#30646,.F.); +#36130 = ORIENTED_EDGE('',*,*,#30638,.F.); +#36131 = ORIENTED_EDGE('',*,*,#36132,.T.); +#36132 = EDGE_CURVE('',#30631,#36115,#36133,.T.); +#36133 = LINE('',#36134,#36135); +#36134 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#36135 = VECTOR('',#36136,1.); +#36136 = DIRECTION('',(0.,-1.,0.)); +#36137 = PLANE('',#36138); +#36138 = AXIS2_PLACEMENT_3D('',#36139,#36140,#36141); +#36139 = CARTESIAN_POINT('',(-8.571261896074,2.72,0.8)); +#36140 = DIRECTION('',(0.,0.,1.)); +#36141 = DIRECTION('',(1.,0.,-0.)); +#36142 = ADVANCED_FACE('',(#36143),#36161,.T.); +#36143 = FACE_BOUND('',#36144,.F.); +#36144 = EDGE_LOOP('',(#36145,#36146,#36147,#36155)); +#36145 = ORIENTED_EDGE('',*,*,#31726,.F.); +#36146 = ORIENTED_EDGE('',*,*,#32571,.T.); +#36147 = ORIENTED_EDGE('',*,*,#36148,.T.); +#36148 = EDGE_CURVE('',#32572,#36149,#36151,.T.); +#36149 = VERTEX_POINT('',#36150); +#36150 = CARTESIAN_POINT('',(8.550000214576,3.17,0.799997961521)); +#36151 = LINE('',#36152,#36153); +#36152 = CARTESIAN_POINT('',(9.000000214576,3.17,0.799997854233)); +#36153 = VECTOR('',#36154,1.); +#36154 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36155 = ORIENTED_EDGE('',*,*,#36156,.F.); +#36156 = EDGE_CURVE('',#31719,#36149,#36157,.T.); +#36157 = LINE('',#36158,#36159); +#36158 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#36159 = VECTOR('',#36160,1.); +#36160 = DIRECTION('',(0.,0.,-1.)); +#36161 = PLANE('',#36162); +#36162 = AXIS2_PLACEMENT_3D('',#36163,#36164,#36165); +#36163 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#36164 = DIRECTION('',(-0.,-1.,-0.)); +#36165 = DIRECTION('',(1.,-0.,0.)); +#36166 = ADVANCED_FACE('',(#36167),#36185,.T.); +#36167 = FACE_BOUND('',#36168,.F.); +#36168 = EDGE_LOOP('',(#36169,#36170,#36171,#36179)); +#36169 = ORIENTED_EDGE('',*,*,#31718,.F.); +#36170 = ORIENTED_EDGE('',*,*,#36156,.T.); +#36171 = ORIENTED_EDGE('',*,*,#36172,.T.); +#36172 = EDGE_CURVE('',#36149,#36173,#36175,.T.); +#36173 = VERTEX_POINT('',#36174); +#36174 = CARTESIAN_POINT('',(8.550000214576,2.27,0.799997961521)); +#36175 = LINE('',#36176,#36177); +#36176 = CARTESIAN_POINT('',(8.550000214576,3.17,0.799997961521)); +#36177 = VECTOR('',#36178,1.); +#36178 = DIRECTION('',(0.,-1.,0.)); +#36179 = ORIENTED_EDGE('',*,*,#36180,.F.); +#36180 = EDGE_CURVE('',#31711,#36173,#36181,.T.); +#36181 = LINE('',#36182,#36183); +#36182 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#36183 = VECTOR('',#36184,1.); +#36184 = DIRECTION('',(0.,0.,-1.)); +#36185 = PLANE('',#36186); +#36186 = AXIS2_PLACEMENT_3D('',#36187,#36188,#36189); +#36187 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#36188 = DIRECTION('',(1.,0.,0.)); +#36189 = DIRECTION('',(-0.,1.,0.)); +#36190 = ADVANCED_FACE('',(#36191),#36202,.T.); +#36191 = FACE_BOUND('',#36192,.F.); +#36192 = EDGE_LOOP('',(#36193,#36194,#36195,#36201)); +#36193 = ORIENTED_EDGE('',*,*,#31710,.F.); +#36194 = ORIENTED_EDGE('',*,*,#36180,.T.); +#36195 = ORIENTED_EDGE('',*,*,#36196,.T.); +#36196 = EDGE_CURVE('',#36173,#32766,#36197,.T.); +#36197 = LINE('',#36198,#36199); +#36198 = CARTESIAN_POINT('',(8.150000214577,2.27,0.799998056888)); +#36199 = VECTOR('',#36200,1.); +#36200 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36201 = ORIENTED_EDGE('',*,*,#32773,.F.); +#36202 = PLANE('',#36203); +#36203 = AXIS2_PLACEMENT_3D('',#36204,#36205,#36206); +#36204 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#36205 = DIRECTION('',(0.,1.,0.)); +#36206 = DIRECTION('',(-1.,0.,0.)); +#36207 = ADVANCED_FACE('',(#36208),#36236,.T.); +#36208 = FACE_BOUND('',#36209,.T.); +#36209 = EDGE_LOOP('',(#36210,#36221,#36227,#36228,#36229,#36230)); +#36210 = ORIENTED_EDGE('',*,*,#36211,.F.); +#36211 = EDGE_CURVE('',#36212,#36214,#36216,.T.); +#36212 = VERTEX_POINT('',#36213); +#36213 = CARTESIAN_POINT('',(-9.,1.175,0.8)); +#36214 = VERTEX_POINT('',#36215); +#36215 = CARTESIAN_POINT('',(-9.,1.725,0.8)); +#36216 = CIRCLE('',#36217,0.275); +#36217 = AXIS2_PLACEMENT_3D('',#36218,#36219,#36220); +#36218 = CARTESIAN_POINT('',(-9.,1.45,0.8)); +#36219 = DIRECTION('',(0.,0.,1.)); +#36220 = DIRECTION('',(1.,0.,-0.)); +#36221 = ORIENTED_EDGE('',*,*,#36222,.T.); +#36222 = EDGE_CURVE('',#36212,#30687,#36223,.T.); +#36223 = LINE('',#36224,#36225); +#36224 = CARTESIAN_POINT('',(-9.,1.175,0.8)); +#36225 = VECTOR('',#36226,1.); +#36226 = DIRECTION('',(0.,-1.,0.)); +#36227 = ORIENTED_EDGE('',*,*,#30686,.F.); +#36228 = ORIENTED_EDGE('',*,*,#30678,.F.); +#36229 = ORIENTED_EDGE('',*,*,#30670,.F.); +#36230 = ORIENTED_EDGE('',*,*,#36231,.T.); +#36231 = EDGE_CURVE('',#30663,#36214,#36232,.T.); +#36232 = LINE('',#36233,#36234); +#36233 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#36234 = VECTOR('',#36235,1.); +#36235 = DIRECTION('',(0.,-1.,0.)); +#36236 = PLANE('',#36237); +#36237 = AXIS2_PLACEMENT_3D('',#36238,#36239,#36240); +#36238 = CARTESIAN_POINT('',(-8.571261896074,1.45,0.8)); +#36239 = DIRECTION('',(0.,0.,1.)); +#36240 = DIRECTION('',(1.,0.,-0.)); +#36241 = ADVANCED_FACE('',(#36242),#36260,.T.); +#36242 = FACE_BOUND('',#36243,.F.); +#36243 = EDGE_LOOP('',(#36244,#36245,#36246,#36254)); +#36244 = ORIENTED_EDGE('',*,*,#31694,.F.); +#36245 = ORIENTED_EDGE('',*,*,#32780,.T.); +#36246 = ORIENTED_EDGE('',*,*,#36247,.T.); +#36247 = EDGE_CURVE('',#32781,#36248,#36250,.T.); +#36248 = VERTEX_POINT('',#36249); +#36249 = CARTESIAN_POINT('',(8.550000214576,1.9,0.799997961521)); +#36250 = LINE('',#36251,#36252); +#36251 = CARTESIAN_POINT('',(9.000000214576,1.9,0.799997854233)); +#36252 = VECTOR('',#36253,1.); +#36253 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36254 = ORIENTED_EDGE('',*,*,#36255,.F.); +#36255 = EDGE_CURVE('',#31687,#36248,#36256,.T.); +#36256 = LINE('',#36257,#36258); +#36257 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#36258 = VECTOR('',#36259,1.); +#36259 = DIRECTION('',(0.,0.,-1.)); +#36260 = PLANE('',#36261); +#36261 = AXIS2_PLACEMENT_3D('',#36262,#36263,#36264); +#36262 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#36263 = DIRECTION('',(-0.,-1.,-0.)); +#36264 = DIRECTION('',(1.,-0.,0.)); +#36265 = ADVANCED_FACE('',(#36266),#36284,.T.); +#36266 = FACE_BOUND('',#36267,.F.); +#36267 = EDGE_LOOP('',(#36268,#36269,#36270,#36278)); +#36268 = ORIENTED_EDGE('',*,*,#31686,.F.); +#36269 = ORIENTED_EDGE('',*,*,#36255,.T.); +#36270 = ORIENTED_EDGE('',*,*,#36271,.T.); +#36271 = EDGE_CURVE('',#36248,#36272,#36274,.T.); +#36272 = VERTEX_POINT('',#36273); +#36273 = CARTESIAN_POINT('',(8.550000214576,1.,0.799997961521)); +#36274 = LINE('',#36275,#36276); +#36275 = CARTESIAN_POINT('',(8.550000214576,1.9,0.799997961521)); +#36276 = VECTOR('',#36277,1.); +#36277 = DIRECTION('',(0.,-1.,0.)); +#36278 = ORIENTED_EDGE('',*,*,#36279,.F.); +#36279 = EDGE_CURVE('',#31679,#36272,#36280,.T.); +#36280 = LINE('',#36281,#36282); +#36281 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#36282 = VECTOR('',#36283,1.); +#36283 = DIRECTION('',(0.,0.,-1.)); +#36284 = PLANE('',#36285); +#36285 = AXIS2_PLACEMENT_3D('',#36286,#36287,#36288); +#36286 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#36287 = DIRECTION('',(1.,0.,0.)); +#36288 = DIRECTION('',(-0.,1.,0.)); +#36289 = ADVANCED_FACE('',(#36290),#36301,.T.); +#36290 = FACE_BOUND('',#36291,.F.); +#36291 = EDGE_LOOP('',(#36292,#36293,#36294,#36300)); +#36292 = ORIENTED_EDGE('',*,*,#31678,.F.); +#36293 = ORIENTED_EDGE('',*,*,#36279,.T.); +#36294 = ORIENTED_EDGE('',*,*,#36295,.T.); +#36295 = EDGE_CURVE('',#36272,#32975,#36296,.T.); +#36296 = LINE('',#36297,#36298); +#36297 = CARTESIAN_POINT('',(8.150000214577,1.,0.799998056888)); +#36298 = VECTOR('',#36299,1.); +#36299 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36300 = ORIENTED_EDGE('',*,*,#32982,.F.); +#36301 = PLANE('',#36302); +#36302 = AXIS2_PLACEMENT_3D('',#36303,#36304,#36305); +#36303 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#36304 = DIRECTION('',(0.,1.,0.)); +#36305 = DIRECTION('',(-1.,0.,0.)); +#36306 = ADVANCED_FACE('',(#36307),#36335,.T.); +#36307 = FACE_BOUND('',#36308,.T.); +#36308 = EDGE_LOOP('',(#36309,#36320,#36326,#36327,#36328,#36329)); +#36309 = ORIENTED_EDGE('',*,*,#36310,.F.); +#36310 = EDGE_CURVE('',#36311,#36313,#36315,.T.); +#36311 = VERTEX_POINT('',#36312); +#36312 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.8)); +#36313 = VERTEX_POINT('',#36314); +#36314 = CARTESIAN_POINT('',(-9.,0.455,0.8)); +#36315 = CIRCLE('',#36316,0.275); +#36316 = AXIS2_PLACEMENT_3D('',#36317,#36318,#36319); +#36317 = CARTESIAN_POINT('',(-9.,0.18,0.8)); +#36318 = DIRECTION('',(0.,0.,1.)); +#36319 = DIRECTION('',(1.,0.,-0.)); +#36320 = ORIENTED_EDGE('',*,*,#36321,.T.); +#36321 = EDGE_CURVE('',#36311,#30719,#36322,.T.); +#36322 = LINE('',#36323,#36324); +#36323 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.8)); +#36324 = VECTOR('',#36325,1.); +#36325 = DIRECTION('',(0.,-1.,0.)); +#36326 = ORIENTED_EDGE('',*,*,#30718,.F.); +#36327 = ORIENTED_EDGE('',*,*,#30710,.F.); +#36328 = ORIENTED_EDGE('',*,*,#30702,.F.); +#36329 = ORIENTED_EDGE('',*,*,#36330,.T.); +#36330 = EDGE_CURVE('',#30695,#36313,#36331,.T.); +#36331 = LINE('',#36332,#36333); +#36332 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#36333 = VECTOR('',#36334,1.); +#36334 = DIRECTION('',(0.,-1.,0.)); +#36335 = PLANE('',#36336); +#36336 = AXIS2_PLACEMENT_3D('',#36337,#36338,#36339); +#36337 = CARTESIAN_POINT('',(-8.571261896074,0.18,0.8)); +#36338 = DIRECTION('',(0.,0.,1.)); +#36339 = DIRECTION('',(1.,0.,-0.)); +#36340 = ADVANCED_FACE('',(#36341),#36359,.T.); +#36341 = FACE_BOUND('',#36342,.F.); +#36342 = EDGE_LOOP('',(#36343,#36344,#36345,#36353)); +#36343 = ORIENTED_EDGE('',*,*,#31662,.F.); +#36344 = ORIENTED_EDGE('',*,*,#32989,.T.); +#36345 = ORIENTED_EDGE('',*,*,#36346,.T.); +#36346 = EDGE_CURVE('',#32990,#36347,#36349,.T.); +#36347 = VERTEX_POINT('',#36348); +#36348 = CARTESIAN_POINT('',(8.550000214576,0.63,0.799997961521)); +#36349 = LINE('',#36350,#36351); +#36350 = CARTESIAN_POINT('',(9.000000214576,0.63,0.799997854233)); +#36351 = VECTOR('',#36352,1.); +#36352 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36353 = ORIENTED_EDGE('',*,*,#36354,.F.); +#36354 = EDGE_CURVE('',#31655,#36347,#36355,.T.); +#36355 = LINE('',#36356,#36357); +#36356 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#36357 = VECTOR('',#36358,1.); +#36358 = DIRECTION('',(0.,0.,-1.)); +#36359 = PLANE('',#36360); +#36360 = AXIS2_PLACEMENT_3D('',#36361,#36362,#36363); +#36361 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#36362 = DIRECTION('',(-0.,-1.,-0.)); +#36363 = DIRECTION('',(1.,-0.,0.)); +#36364 = ADVANCED_FACE('',(#36365),#36383,.T.); +#36365 = FACE_BOUND('',#36366,.F.); +#36366 = EDGE_LOOP('',(#36367,#36368,#36369,#36377)); +#36367 = ORIENTED_EDGE('',*,*,#31654,.F.); +#36368 = ORIENTED_EDGE('',*,*,#36354,.T.); +#36369 = ORIENTED_EDGE('',*,*,#36370,.T.); +#36370 = EDGE_CURVE('',#36347,#36371,#36373,.T.); +#36371 = VERTEX_POINT('',#36372); +#36372 = CARTESIAN_POINT('',(8.550000214576,-0.27,0.799997961521)); +#36373 = LINE('',#36374,#36375); +#36374 = CARTESIAN_POINT('',(8.550000214576,0.63,0.799997961521)); +#36375 = VECTOR('',#36376,1.); +#36376 = DIRECTION('',(0.,-1.,0.)); +#36377 = ORIENTED_EDGE('',*,*,#36378,.F.); +#36378 = EDGE_CURVE('',#31647,#36371,#36379,.T.); +#36379 = LINE('',#36380,#36381); +#36380 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#36381 = VECTOR('',#36382,1.); +#36382 = DIRECTION('',(0.,0.,-1.)); +#36383 = PLANE('',#36384); +#36384 = AXIS2_PLACEMENT_3D('',#36385,#36386,#36387); +#36385 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#36386 = DIRECTION('',(1.,0.,0.)); +#36387 = DIRECTION('',(-0.,1.,0.)); +#36388 = ADVANCED_FACE('',(#36389),#36400,.T.); +#36389 = FACE_BOUND('',#36390,.F.); +#36390 = EDGE_LOOP('',(#36391,#36392,#36393,#36399)); +#36391 = ORIENTED_EDGE('',*,*,#31646,.F.); +#36392 = ORIENTED_EDGE('',*,*,#36378,.T.); +#36393 = ORIENTED_EDGE('',*,*,#36394,.T.); +#36394 = EDGE_CURVE('',#36371,#33184,#36395,.T.); +#36395 = LINE('',#36396,#36397); +#36396 = CARTESIAN_POINT('',(8.150000214577,-0.27,0.799998056888)); +#36397 = VECTOR('',#36398,1.); +#36398 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36399 = ORIENTED_EDGE('',*,*,#33191,.F.); +#36400 = PLANE('',#36401); +#36401 = AXIS2_PLACEMENT_3D('',#36402,#36403,#36404); +#36402 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#36403 = DIRECTION('',(0.,1.,0.)); +#36404 = DIRECTION('',(-1.,0.,0.)); +#36405 = ADVANCED_FACE('',(#36406),#36434,.T.); +#36406 = FACE_BOUND('',#36407,.T.); +#36407 = EDGE_LOOP('',(#36408,#36419,#36425,#36426,#36427,#36428)); +#36408 = ORIENTED_EDGE('',*,*,#36409,.F.); +#36409 = EDGE_CURVE('',#36410,#36412,#36414,.T.); +#36410 = VERTEX_POINT('',#36411); +#36411 = CARTESIAN_POINT('',(-9.,-1.365,0.8)); +#36412 = VERTEX_POINT('',#36413); +#36413 = CARTESIAN_POINT('',(-9.,-0.815,0.8)); +#36414 = CIRCLE('',#36415,0.275); +#36415 = AXIS2_PLACEMENT_3D('',#36416,#36417,#36418); +#36416 = CARTESIAN_POINT('',(-9.,-1.09,0.8)); +#36417 = DIRECTION('',(0.,0.,1.)); +#36418 = DIRECTION('',(1.,0.,-0.)); +#36419 = ORIENTED_EDGE('',*,*,#36420,.T.); +#36420 = EDGE_CURVE('',#36410,#30751,#36421,.T.); +#36421 = LINE('',#36422,#36423); +#36422 = CARTESIAN_POINT('',(-9.,-1.365,0.8)); +#36423 = VECTOR('',#36424,1.); +#36424 = DIRECTION('',(0.,-1.,0.)); +#36425 = ORIENTED_EDGE('',*,*,#30750,.F.); +#36426 = ORIENTED_EDGE('',*,*,#30742,.F.); +#36427 = ORIENTED_EDGE('',*,*,#30734,.F.); +#36428 = ORIENTED_EDGE('',*,*,#36429,.T.); +#36429 = EDGE_CURVE('',#30727,#36412,#36430,.T.); +#36430 = LINE('',#36431,#36432); +#36431 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#36432 = VECTOR('',#36433,1.); +#36433 = DIRECTION('',(0.,-1.,0.)); +#36434 = PLANE('',#36435); +#36435 = AXIS2_PLACEMENT_3D('',#36436,#36437,#36438); +#36436 = CARTESIAN_POINT('',(-8.571261896074,-1.09,0.8)); +#36437 = DIRECTION('',(0.,0.,1.)); +#36438 = DIRECTION('',(1.,0.,-0.)); +#36439 = ADVANCED_FACE('',(#36440),#36458,.T.); +#36440 = FACE_BOUND('',#36441,.F.); +#36441 = EDGE_LOOP('',(#36442,#36443,#36444,#36452)); +#36442 = ORIENTED_EDGE('',*,*,#31630,.F.); +#36443 = ORIENTED_EDGE('',*,*,#33198,.T.); +#36444 = ORIENTED_EDGE('',*,*,#36445,.T.); +#36445 = EDGE_CURVE('',#33199,#36446,#36448,.T.); +#36446 = VERTEX_POINT('',#36447); +#36447 = CARTESIAN_POINT('',(8.550000214576,-0.64,0.799997961521)); +#36448 = LINE('',#36449,#36450); +#36449 = CARTESIAN_POINT('',(9.000000214576,-0.64,0.799997854233)); +#36450 = VECTOR('',#36451,1.); +#36451 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36452 = ORIENTED_EDGE('',*,*,#36453,.F.); +#36453 = EDGE_CURVE('',#31623,#36446,#36454,.T.); +#36454 = LINE('',#36455,#36456); +#36455 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#36456 = VECTOR('',#36457,1.); +#36457 = DIRECTION('',(0.,0.,-1.)); +#36458 = PLANE('',#36459); +#36459 = AXIS2_PLACEMENT_3D('',#36460,#36461,#36462); +#36460 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#36461 = DIRECTION('',(-0.,-1.,-0.)); +#36462 = DIRECTION('',(1.,-0.,0.)); +#36463 = ADVANCED_FACE('',(#36464),#36482,.T.); +#36464 = FACE_BOUND('',#36465,.F.); +#36465 = EDGE_LOOP('',(#36466,#36467,#36468,#36476)); +#36466 = ORIENTED_EDGE('',*,*,#31622,.F.); +#36467 = ORIENTED_EDGE('',*,*,#36453,.T.); +#36468 = ORIENTED_EDGE('',*,*,#36469,.T.); +#36469 = EDGE_CURVE('',#36446,#36470,#36472,.T.); +#36470 = VERTEX_POINT('',#36471); +#36471 = CARTESIAN_POINT('',(8.550000214576,-1.54,0.799997961521)); +#36472 = LINE('',#36473,#36474); +#36473 = CARTESIAN_POINT('',(8.550000214576,-0.64,0.799997961521)); +#36474 = VECTOR('',#36475,1.); +#36475 = DIRECTION('',(0.,-1.,0.)); +#36476 = ORIENTED_EDGE('',*,*,#36477,.F.); +#36477 = EDGE_CURVE('',#31615,#36470,#36478,.T.); +#36478 = LINE('',#36479,#36480); +#36479 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#36480 = VECTOR('',#36481,1.); +#36481 = DIRECTION('',(0.,0.,-1.)); +#36482 = PLANE('',#36483); +#36483 = AXIS2_PLACEMENT_3D('',#36484,#36485,#36486); +#36484 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#36485 = DIRECTION('',(1.,0.,0.)); +#36486 = DIRECTION('',(-0.,1.,0.)); +#36487 = ADVANCED_FACE('',(#36488),#36499,.T.); +#36488 = FACE_BOUND('',#36489,.F.); +#36489 = EDGE_LOOP('',(#36490,#36491,#36492,#36498)); +#36490 = ORIENTED_EDGE('',*,*,#31614,.F.); +#36491 = ORIENTED_EDGE('',*,*,#36477,.T.); +#36492 = ORIENTED_EDGE('',*,*,#36493,.T.); +#36493 = EDGE_CURVE('',#36470,#33393,#36494,.T.); +#36494 = LINE('',#36495,#36496); +#36495 = CARTESIAN_POINT('',(8.150000214577,-1.54,0.799998056888)); +#36496 = VECTOR('',#36497,1.); +#36497 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36498 = ORIENTED_EDGE('',*,*,#33400,.F.); +#36499 = PLANE('',#36500); +#36500 = AXIS2_PLACEMENT_3D('',#36501,#36502,#36503); +#36501 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#36502 = DIRECTION('',(0.,1.,0.)); +#36503 = DIRECTION('',(-1.,0.,0.)); +#36504 = ADVANCED_FACE('',(#36505),#36533,.T.); +#36505 = FACE_BOUND('',#36506,.T.); +#36506 = EDGE_LOOP('',(#36507,#36518,#36524,#36525,#36526,#36527)); +#36507 = ORIENTED_EDGE('',*,*,#36508,.F.); +#36508 = EDGE_CURVE('',#36509,#36511,#36513,.T.); +#36509 = VERTEX_POINT('',#36510); +#36510 = CARTESIAN_POINT('',(-9.,-2.635,0.8)); +#36511 = VERTEX_POINT('',#36512); +#36512 = CARTESIAN_POINT('',(-9.,-2.085,0.8)); +#36513 = CIRCLE('',#36514,0.275); +#36514 = AXIS2_PLACEMENT_3D('',#36515,#36516,#36517); +#36515 = CARTESIAN_POINT('',(-9.,-2.36,0.8)); +#36516 = DIRECTION('',(0.,0.,1.)); +#36517 = DIRECTION('',(1.,0.,-0.)); +#36518 = ORIENTED_EDGE('',*,*,#36519,.T.); +#36519 = EDGE_CURVE('',#36509,#30783,#36520,.T.); +#36520 = LINE('',#36521,#36522); +#36521 = CARTESIAN_POINT('',(-9.,-2.635,0.8)); +#36522 = VECTOR('',#36523,1.); +#36523 = DIRECTION('',(0.,-1.,0.)); +#36524 = ORIENTED_EDGE('',*,*,#30782,.F.); +#36525 = ORIENTED_EDGE('',*,*,#30774,.F.); +#36526 = ORIENTED_EDGE('',*,*,#30766,.F.); +#36527 = ORIENTED_EDGE('',*,*,#36528,.T.); +#36528 = EDGE_CURVE('',#30759,#36511,#36529,.T.); +#36529 = LINE('',#36530,#36531); +#36530 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#36531 = VECTOR('',#36532,1.); +#36532 = DIRECTION('',(0.,-1.,0.)); +#36533 = PLANE('',#36534); +#36534 = AXIS2_PLACEMENT_3D('',#36535,#36536,#36537); +#36535 = CARTESIAN_POINT('',(-8.571261896074,-2.36,0.8)); +#36536 = DIRECTION('',(0.,0.,1.)); +#36537 = DIRECTION('',(1.,0.,-0.)); +#36538 = ADVANCED_FACE('',(#36539),#36557,.T.); +#36539 = FACE_BOUND('',#36540,.F.); +#36540 = EDGE_LOOP('',(#36541,#36542,#36543,#36551)); +#36541 = ORIENTED_EDGE('',*,*,#31598,.F.); +#36542 = ORIENTED_EDGE('',*,*,#33407,.T.); +#36543 = ORIENTED_EDGE('',*,*,#36544,.T.); +#36544 = EDGE_CURVE('',#33408,#36545,#36547,.T.); +#36545 = VERTEX_POINT('',#36546); +#36546 = CARTESIAN_POINT('',(8.550000214576,-1.91,0.799997961521)); +#36547 = LINE('',#36548,#36549); +#36548 = CARTESIAN_POINT('',(9.000000214576,-1.91,0.799997854233)); +#36549 = VECTOR('',#36550,1.); +#36550 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36551 = ORIENTED_EDGE('',*,*,#36552,.F.); +#36552 = EDGE_CURVE('',#31591,#36545,#36553,.T.); +#36553 = LINE('',#36554,#36555); +#36554 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#36555 = VECTOR('',#36556,1.); +#36556 = DIRECTION('',(0.,0.,-1.)); +#36557 = PLANE('',#36558); +#36558 = AXIS2_PLACEMENT_3D('',#36559,#36560,#36561); +#36559 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#36560 = DIRECTION('',(-0.,-1.,-0.)); +#36561 = DIRECTION('',(1.,-0.,0.)); +#36562 = ADVANCED_FACE('',(#36563),#36581,.T.); +#36563 = FACE_BOUND('',#36564,.F.); +#36564 = EDGE_LOOP('',(#36565,#36566,#36567,#36575)); +#36565 = ORIENTED_EDGE('',*,*,#31590,.F.); +#36566 = ORIENTED_EDGE('',*,*,#36552,.T.); +#36567 = ORIENTED_EDGE('',*,*,#36568,.T.); +#36568 = EDGE_CURVE('',#36545,#36569,#36571,.T.); +#36569 = VERTEX_POINT('',#36570); +#36570 = CARTESIAN_POINT('',(8.550000214576,-2.81,0.799997961521)); +#36571 = LINE('',#36572,#36573); +#36572 = CARTESIAN_POINT('',(8.550000214576,-1.91,0.799997961521)); +#36573 = VECTOR('',#36574,1.); +#36574 = DIRECTION('',(0.,-1.,0.)); +#36575 = ORIENTED_EDGE('',*,*,#36576,.F.); +#36576 = EDGE_CURVE('',#31583,#36569,#36577,.T.); +#36577 = LINE('',#36578,#36579); +#36578 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#36579 = VECTOR('',#36580,1.); +#36580 = DIRECTION('',(0.,0.,-1.)); +#36581 = PLANE('',#36582); +#36582 = AXIS2_PLACEMENT_3D('',#36583,#36584,#36585); +#36583 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#36584 = DIRECTION('',(1.,0.,0.)); +#36585 = DIRECTION('',(-0.,1.,0.)); +#36586 = ADVANCED_FACE('',(#36587),#36598,.T.); +#36587 = FACE_BOUND('',#36588,.F.); +#36588 = EDGE_LOOP('',(#36589,#36590,#36591,#36597)); +#36589 = ORIENTED_EDGE('',*,*,#31582,.F.); +#36590 = ORIENTED_EDGE('',*,*,#36576,.T.); +#36591 = ORIENTED_EDGE('',*,*,#36592,.T.); +#36592 = EDGE_CURVE('',#36569,#33602,#36593,.T.); +#36593 = LINE('',#36594,#36595); +#36594 = CARTESIAN_POINT('',(8.150000214577,-2.81,0.799998056888)); +#36595 = VECTOR('',#36596,1.); +#36596 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36597 = ORIENTED_EDGE('',*,*,#33609,.F.); +#36598 = PLANE('',#36599); +#36599 = AXIS2_PLACEMENT_3D('',#36600,#36601,#36602); +#36600 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#36601 = DIRECTION('',(0.,1.,0.)); +#36602 = DIRECTION('',(-1.,0.,0.)); +#36603 = ADVANCED_FACE('',(#36604),#36632,.T.); +#36604 = FACE_BOUND('',#36605,.T.); +#36605 = EDGE_LOOP('',(#36606,#36617,#36623,#36624,#36625,#36626)); +#36606 = ORIENTED_EDGE('',*,*,#36607,.F.); +#36607 = EDGE_CURVE('',#36608,#36610,#36612,.T.); +#36608 = VERTEX_POINT('',#36609); +#36609 = CARTESIAN_POINT('',(-9.,-3.905,0.8)); +#36610 = VERTEX_POINT('',#36611); +#36611 = CARTESIAN_POINT('',(-9.,-3.355,0.8)); +#36612 = CIRCLE('',#36613,0.275); +#36613 = AXIS2_PLACEMENT_3D('',#36614,#36615,#36616); +#36614 = CARTESIAN_POINT('',(-9.,-3.63,0.8)); +#36615 = DIRECTION('',(0.,0.,1.)); +#36616 = DIRECTION('',(1.,0.,-0.)); +#36617 = ORIENTED_EDGE('',*,*,#36618,.T.); +#36618 = EDGE_CURVE('',#36608,#30815,#36619,.T.); +#36619 = LINE('',#36620,#36621); +#36620 = CARTESIAN_POINT('',(-9.,-3.905,0.8)); +#36621 = VECTOR('',#36622,1.); +#36622 = DIRECTION('',(0.,-1.,0.)); +#36623 = ORIENTED_EDGE('',*,*,#30814,.F.); +#36624 = ORIENTED_EDGE('',*,*,#30806,.F.); +#36625 = ORIENTED_EDGE('',*,*,#30798,.F.); +#36626 = ORIENTED_EDGE('',*,*,#36627,.T.); +#36627 = EDGE_CURVE('',#30791,#36610,#36628,.T.); +#36628 = LINE('',#36629,#36630); +#36629 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#36630 = VECTOR('',#36631,1.); +#36631 = DIRECTION('',(0.,-1.,0.)); +#36632 = PLANE('',#36633); +#36633 = AXIS2_PLACEMENT_3D('',#36634,#36635,#36636); +#36634 = CARTESIAN_POINT('',(-8.571261896074,-3.63,0.8)); +#36635 = DIRECTION('',(0.,0.,1.)); +#36636 = DIRECTION('',(1.,0.,-0.)); +#36637 = ADVANCED_FACE('',(#36638),#36656,.T.); +#36638 = FACE_BOUND('',#36639,.F.); +#36639 = EDGE_LOOP('',(#36640,#36641,#36642,#36650)); +#36640 = ORIENTED_EDGE('',*,*,#31566,.F.); +#36641 = ORIENTED_EDGE('',*,*,#33616,.T.); +#36642 = ORIENTED_EDGE('',*,*,#36643,.T.); +#36643 = EDGE_CURVE('',#33617,#36644,#36646,.T.); +#36644 = VERTEX_POINT('',#36645); +#36645 = CARTESIAN_POINT('',(8.550000214576,-3.18,0.799997961521)); +#36646 = LINE('',#36647,#36648); +#36647 = CARTESIAN_POINT('',(9.000000214576,-3.18,0.799997854233)); +#36648 = VECTOR('',#36649,1.); +#36649 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36650 = ORIENTED_EDGE('',*,*,#36651,.F.); +#36651 = EDGE_CURVE('',#31559,#36644,#36652,.T.); +#36652 = LINE('',#36653,#36654); +#36653 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#36654 = VECTOR('',#36655,1.); +#36655 = DIRECTION('',(0.,0.,-1.)); +#36656 = PLANE('',#36657); +#36657 = AXIS2_PLACEMENT_3D('',#36658,#36659,#36660); +#36658 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#36659 = DIRECTION('',(-0.,-1.,-0.)); +#36660 = DIRECTION('',(1.,-0.,0.)); +#36661 = ADVANCED_FACE('',(#36662),#36680,.T.); +#36662 = FACE_BOUND('',#36663,.F.); +#36663 = EDGE_LOOP('',(#36664,#36665,#36666,#36674)); +#36664 = ORIENTED_EDGE('',*,*,#31558,.F.); +#36665 = ORIENTED_EDGE('',*,*,#36651,.T.); +#36666 = ORIENTED_EDGE('',*,*,#36667,.T.); +#36667 = EDGE_CURVE('',#36644,#36668,#36670,.T.); +#36668 = VERTEX_POINT('',#36669); +#36669 = CARTESIAN_POINT('',(8.550000214576,-4.08,0.799997961521)); +#36670 = LINE('',#36671,#36672); +#36671 = CARTESIAN_POINT('',(8.550000214576,-3.18,0.799997961521)); +#36672 = VECTOR('',#36673,1.); +#36673 = DIRECTION('',(0.,-1.,0.)); +#36674 = ORIENTED_EDGE('',*,*,#36675,.F.); +#36675 = EDGE_CURVE('',#31551,#36668,#36676,.T.); +#36676 = LINE('',#36677,#36678); +#36677 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#36678 = VECTOR('',#36679,1.); +#36679 = DIRECTION('',(0.,0.,-1.)); +#36680 = PLANE('',#36681); +#36681 = AXIS2_PLACEMENT_3D('',#36682,#36683,#36684); +#36682 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#36683 = DIRECTION('',(1.,0.,0.)); +#36684 = DIRECTION('',(-0.,1.,0.)); +#36685 = ADVANCED_FACE('',(#36686),#36697,.T.); +#36686 = FACE_BOUND('',#36687,.F.); +#36687 = EDGE_LOOP('',(#36688,#36689,#36690,#36696)); +#36688 = ORIENTED_EDGE('',*,*,#31550,.F.); +#36689 = ORIENTED_EDGE('',*,*,#36675,.T.); +#36690 = ORIENTED_EDGE('',*,*,#36691,.T.); +#36691 = EDGE_CURVE('',#36668,#33811,#36692,.T.); +#36692 = LINE('',#36693,#36694); +#36693 = CARTESIAN_POINT('',(8.150000214577,-4.08,0.799998056888)); +#36694 = VECTOR('',#36695,1.); +#36695 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36696 = ORIENTED_EDGE('',*,*,#33818,.F.); +#36697 = PLANE('',#36698); +#36698 = AXIS2_PLACEMENT_3D('',#36699,#36700,#36701); +#36699 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#36700 = DIRECTION('',(0.,1.,0.)); +#36701 = DIRECTION('',(-1.,0.,0.)); +#36702 = ADVANCED_FACE('',(#36703),#36731,.T.); +#36703 = FACE_BOUND('',#36704,.T.); +#36704 = EDGE_LOOP('',(#36705,#36716,#36722,#36723,#36724,#36725)); +#36705 = ORIENTED_EDGE('',*,*,#36706,.F.); +#36706 = EDGE_CURVE('',#36707,#36709,#36711,.T.); +#36707 = VERTEX_POINT('',#36708); +#36708 = CARTESIAN_POINT('',(-9.,-5.175,0.8)); +#36709 = VERTEX_POINT('',#36710); +#36710 = CARTESIAN_POINT('',(-9.,-4.625,0.8)); +#36711 = CIRCLE('',#36712,0.275); +#36712 = AXIS2_PLACEMENT_3D('',#36713,#36714,#36715); +#36713 = CARTESIAN_POINT('',(-9.,-4.9,0.8)); +#36714 = DIRECTION('',(0.,0.,1.)); +#36715 = DIRECTION('',(1.,0.,-0.)); +#36716 = ORIENTED_EDGE('',*,*,#36717,.T.); +#36717 = EDGE_CURVE('',#36707,#30847,#36718,.T.); +#36718 = LINE('',#36719,#36720); +#36719 = CARTESIAN_POINT('',(-9.,-5.175,0.8)); +#36720 = VECTOR('',#36721,1.); +#36721 = DIRECTION('',(0.,-1.,0.)); +#36722 = ORIENTED_EDGE('',*,*,#30846,.F.); +#36723 = ORIENTED_EDGE('',*,*,#30838,.F.); +#36724 = ORIENTED_EDGE('',*,*,#30830,.F.); +#36725 = ORIENTED_EDGE('',*,*,#36726,.T.); +#36726 = EDGE_CURVE('',#30823,#36709,#36727,.T.); +#36727 = LINE('',#36728,#36729); +#36728 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#36729 = VECTOR('',#36730,1.); +#36730 = DIRECTION('',(0.,-1.,0.)); +#36731 = PLANE('',#36732); +#36732 = AXIS2_PLACEMENT_3D('',#36733,#36734,#36735); +#36733 = CARTESIAN_POINT('',(-8.571261896074,-4.9,0.8)); +#36734 = DIRECTION('',(0.,0.,1.)); +#36735 = DIRECTION('',(1.,0.,-0.)); +#36736 = ADVANCED_FACE('',(#36737),#36755,.T.); +#36737 = FACE_BOUND('',#36738,.F.); +#36738 = EDGE_LOOP('',(#36739,#36740,#36741,#36749)); +#36739 = ORIENTED_EDGE('',*,*,#31534,.F.); +#36740 = ORIENTED_EDGE('',*,*,#33825,.T.); +#36741 = ORIENTED_EDGE('',*,*,#36742,.T.); +#36742 = EDGE_CURVE('',#33826,#36743,#36745,.T.); +#36743 = VERTEX_POINT('',#36744); +#36744 = CARTESIAN_POINT('',(8.550000214576,-4.45,0.799997961521)); +#36745 = LINE('',#36746,#36747); +#36746 = CARTESIAN_POINT('',(9.000000214576,-4.45,0.799997854233)); +#36747 = VECTOR('',#36748,1.); +#36748 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36749 = ORIENTED_EDGE('',*,*,#36750,.F.); +#36750 = EDGE_CURVE('',#31527,#36743,#36751,.T.); +#36751 = LINE('',#36752,#36753); +#36752 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#36753 = VECTOR('',#36754,1.); +#36754 = DIRECTION('',(0.,0.,-1.)); +#36755 = PLANE('',#36756); +#36756 = AXIS2_PLACEMENT_3D('',#36757,#36758,#36759); +#36757 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#36758 = DIRECTION('',(-0.,-1.,-0.)); +#36759 = DIRECTION('',(1.,-0.,0.)); +#36760 = ADVANCED_FACE('',(#36761),#36779,.T.); +#36761 = FACE_BOUND('',#36762,.F.); +#36762 = EDGE_LOOP('',(#36763,#36764,#36765,#36773)); +#36763 = ORIENTED_EDGE('',*,*,#31526,.F.); +#36764 = ORIENTED_EDGE('',*,*,#36750,.T.); +#36765 = ORIENTED_EDGE('',*,*,#36766,.T.); +#36766 = EDGE_CURVE('',#36743,#36767,#36769,.T.); +#36767 = VERTEX_POINT('',#36768); +#36768 = CARTESIAN_POINT('',(8.550000214576,-5.35,0.799997961521)); +#36769 = LINE('',#36770,#36771); +#36770 = CARTESIAN_POINT('',(8.550000214576,-4.45,0.799997961521)); +#36771 = VECTOR('',#36772,1.); +#36772 = DIRECTION('',(0.,-1.,0.)); +#36773 = ORIENTED_EDGE('',*,*,#36774,.F.); +#36774 = EDGE_CURVE('',#31519,#36767,#36775,.T.); +#36775 = LINE('',#36776,#36777); +#36776 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#36777 = VECTOR('',#36778,1.); +#36778 = DIRECTION('',(0.,0.,-1.)); +#36779 = PLANE('',#36780); +#36780 = AXIS2_PLACEMENT_3D('',#36781,#36782,#36783); +#36781 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#36782 = DIRECTION('',(1.,0.,0.)); +#36783 = DIRECTION('',(-0.,1.,0.)); +#36784 = ADVANCED_FACE('',(#36785),#36796,.T.); +#36785 = FACE_BOUND('',#36786,.F.); +#36786 = EDGE_LOOP('',(#36787,#36788,#36789,#36795)); +#36787 = ORIENTED_EDGE('',*,*,#31518,.F.); +#36788 = ORIENTED_EDGE('',*,*,#36774,.T.); +#36789 = ORIENTED_EDGE('',*,*,#36790,.T.); +#36790 = EDGE_CURVE('',#36767,#34020,#36791,.T.); +#36791 = LINE('',#36792,#36793); +#36792 = CARTESIAN_POINT('',(8.150000214577,-5.35,0.799998056888)); +#36793 = VECTOR('',#36794,1.); +#36794 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36795 = ORIENTED_EDGE('',*,*,#34027,.F.); +#36796 = PLANE('',#36797); +#36797 = AXIS2_PLACEMENT_3D('',#36798,#36799,#36800); +#36798 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#36799 = DIRECTION('',(0.,1.,0.)); +#36800 = DIRECTION('',(-1.,0.,0.)); +#36801 = ADVANCED_FACE('',(#36802),#36830,.T.); +#36802 = FACE_BOUND('',#36803,.T.); +#36803 = EDGE_LOOP('',(#36804,#36815,#36821,#36822,#36823,#36824)); +#36804 = ORIENTED_EDGE('',*,*,#36805,.F.); +#36805 = EDGE_CURVE('',#36806,#36808,#36810,.T.); +#36806 = VERTEX_POINT('',#36807); +#36807 = CARTESIAN_POINT('',(-9.,-6.445,0.8)); +#36808 = VERTEX_POINT('',#36809); +#36809 = CARTESIAN_POINT('',(-9.,-5.895,0.8)); +#36810 = CIRCLE('',#36811,0.275); +#36811 = AXIS2_PLACEMENT_3D('',#36812,#36813,#36814); +#36812 = CARTESIAN_POINT('',(-9.,-6.17,0.8)); +#36813 = DIRECTION('',(0.,0.,1.)); +#36814 = DIRECTION('',(1.,0.,-0.)); +#36815 = ORIENTED_EDGE('',*,*,#36816,.T.); +#36816 = EDGE_CURVE('',#36806,#30879,#36817,.T.); +#36817 = LINE('',#36818,#36819); +#36818 = CARTESIAN_POINT('',(-9.,-6.445,0.8)); +#36819 = VECTOR('',#36820,1.); +#36820 = DIRECTION('',(0.,-1.,0.)); +#36821 = ORIENTED_EDGE('',*,*,#30878,.F.); +#36822 = ORIENTED_EDGE('',*,*,#30870,.F.); +#36823 = ORIENTED_EDGE('',*,*,#30862,.F.); +#36824 = ORIENTED_EDGE('',*,*,#36825,.T.); +#36825 = EDGE_CURVE('',#30855,#36808,#36826,.T.); +#36826 = LINE('',#36827,#36828); +#36827 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#36828 = VECTOR('',#36829,1.); +#36829 = DIRECTION('',(0.,-1.,0.)); +#36830 = PLANE('',#36831); +#36831 = AXIS2_PLACEMENT_3D('',#36832,#36833,#36834); +#36832 = CARTESIAN_POINT('',(-8.571261896074,-6.17,0.8)); +#36833 = DIRECTION('',(0.,0.,1.)); +#36834 = DIRECTION('',(1.,0.,-0.)); +#36835 = ADVANCED_FACE('',(#36836),#36854,.T.); +#36836 = FACE_BOUND('',#36837,.F.); +#36837 = EDGE_LOOP('',(#36838,#36839,#36840,#36848)); +#36838 = ORIENTED_EDGE('',*,*,#31502,.F.); +#36839 = ORIENTED_EDGE('',*,*,#34034,.T.); +#36840 = ORIENTED_EDGE('',*,*,#36841,.T.); +#36841 = EDGE_CURVE('',#34035,#36842,#36844,.T.); +#36842 = VERTEX_POINT('',#36843); +#36843 = CARTESIAN_POINT('',(8.550000214576,-5.72,0.799997961521)); +#36844 = LINE('',#36845,#36846); +#36845 = CARTESIAN_POINT('',(9.000000214576,-5.72,0.799997854233)); +#36846 = VECTOR('',#36847,1.); +#36847 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36848 = ORIENTED_EDGE('',*,*,#36849,.F.); +#36849 = EDGE_CURVE('',#31495,#36842,#36850,.T.); +#36850 = LINE('',#36851,#36852); +#36851 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#36852 = VECTOR('',#36853,1.); +#36853 = DIRECTION('',(0.,0.,-1.)); +#36854 = PLANE('',#36855); +#36855 = AXIS2_PLACEMENT_3D('',#36856,#36857,#36858); +#36856 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#36857 = DIRECTION('',(-0.,-1.,-0.)); +#36858 = DIRECTION('',(1.,-0.,0.)); +#36859 = ADVANCED_FACE('',(#36860),#36878,.T.); +#36860 = FACE_BOUND('',#36861,.F.); +#36861 = EDGE_LOOP('',(#36862,#36863,#36864,#36872)); +#36862 = ORIENTED_EDGE('',*,*,#31494,.F.); +#36863 = ORIENTED_EDGE('',*,*,#36849,.T.); +#36864 = ORIENTED_EDGE('',*,*,#36865,.T.); +#36865 = EDGE_CURVE('',#36842,#36866,#36868,.T.); +#36866 = VERTEX_POINT('',#36867); +#36867 = CARTESIAN_POINT('',(8.550000214576,-6.62,0.799997961521)); +#36868 = LINE('',#36869,#36870); +#36869 = CARTESIAN_POINT('',(8.550000214576,-5.72,0.799997961521)); +#36870 = VECTOR('',#36871,1.); +#36871 = DIRECTION('',(0.,-1.,0.)); +#36872 = ORIENTED_EDGE('',*,*,#36873,.F.); +#36873 = EDGE_CURVE('',#31487,#36866,#36874,.T.); +#36874 = LINE('',#36875,#36876); +#36875 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#36876 = VECTOR('',#36877,1.); +#36877 = DIRECTION('',(0.,0.,-1.)); +#36878 = PLANE('',#36879); +#36879 = AXIS2_PLACEMENT_3D('',#36880,#36881,#36882); +#36880 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#36881 = DIRECTION('',(1.,0.,0.)); +#36882 = DIRECTION('',(-0.,1.,0.)); +#36883 = ADVANCED_FACE('',(#36884),#36895,.T.); +#36884 = FACE_BOUND('',#36885,.F.); +#36885 = EDGE_LOOP('',(#36886,#36887,#36888,#36894)); +#36886 = ORIENTED_EDGE('',*,*,#31486,.F.); +#36887 = ORIENTED_EDGE('',*,*,#36873,.T.); +#36888 = ORIENTED_EDGE('',*,*,#36889,.T.); +#36889 = EDGE_CURVE('',#36866,#34229,#36890,.T.); +#36890 = LINE('',#36891,#36892); +#36891 = CARTESIAN_POINT('',(8.150000214577,-6.62,0.799998056888)); +#36892 = VECTOR('',#36893,1.); +#36893 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36894 = ORIENTED_EDGE('',*,*,#34236,.F.); +#36895 = PLANE('',#36896); +#36896 = AXIS2_PLACEMENT_3D('',#36897,#36898,#36899); +#36897 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#36898 = DIRECTION('',(0.,1.,0.)); +#36899 = DIRECTION('',(-1.,0.,0.)); +#36900 = ADVANCED_FACE('',(#36901),#36929,.T.); +#36901 = FACE_BOUND('',#36902,.T.); +#36902 = EDGE_LOOP('',(#36903,#36914,#36920,#36921,#36922,#36923)); +#36903 = ORIENTED_EDGE('',*,*,#36904,.F.); +#36904 = EDGE_CURVE('',#36905,#36907,#36909,.T.); +#36905 = VERTEX_POINT('',#36906); +#36906 = CARTESIAN_POINT('',(-9.,-7.715,0.8)); +#36907 = VERTEX_POINT('',#36908); +#36908 = CARTESIAN_POINT('',(-9.,-7.165,0.8)); +#36909 = CIRCLE('',#36910,0.275); +#36910 = AXIS2_PLACEMENT_3D('',#36911,#36912,#36913); +#36911 = CARTESIAN_POINT('',(-9.,-7.44,0.8)); +#36912 = DIRECTION('',(0.,0.,1.)); +#36913 = DIRECTION('',(1.,0.,-0.)); +#36914 = ORIENTED_EDGE('',*,*,#36915,.T.); +#36915 = EDGE_CURVE('',#36905,#30911,#36916,.T.); +#36916 = LINE('',#36917,#36918); +#36917 = CARTESIAN_POINT('',(-9.,-7.715,0.8)); +#36918 = VECTOR('',#36919,1.); +#36919 = DIRECTION('',(0.,-1.,0.)); +#36920 = ORIENTED_EDGE('',*,*,#30910,.F.); +#36921 = ORIENTED_EDGE('',*,*,#30902,.F.); +#36922 = ORIENTED_EDGE('',*,*,#30894,.F.); +#36923 = ORIENTED_EDGE('',*,*,#36924,.T.); +#36924 = EDGE_CURVE('',#30887,#36907,#36925,.T.); +#36925 = LINE('',#36926,#36927); +#36926 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#36927 = VECTOR('',#36928,1.); +#36928 = DIRECTION('',(0.,-1.,0.)); +#36929 = PLANE('',#36930); +#36930 = AXIS2_PLACEMENT_3D('',#36931,#36932,#36933); +#36931 = CARTESIAN_POINT('',(-8.571261896074,-7.44,0.8)); +#36932 = DIRECTION('',(0.,0.,1.)); +#36933 = DIRECTION('',(1.,0.,-0.)); +#36934 = ADVANCED_FACE('',(#36935),#36953,.T.); +#36935 = FACE_BOUND('',#36936,.F.); +#36936 = EDGE_LOOP('',(#36937,#36938,#36939,#36947)); +#36937 = ORIENTED_EDGE('',*,*,#31470,.F.); +#36938 = ORIENTED_EDGE('',*,*,#34243,.T.); +#36939 = ORIENTED_EDGE('',*,*,#36940,.T.); +#36940 = EDGE_CURVE('',#34244,#36941,#36943,.T.); +#36941 = VERTEX_POINT('',#36942); +#36942 = CARTESIAN_POINT('',(8.550000214576,-6.99,0.799997961521)); +#36943 = LINE('',#36944,#36945); +#36944 = CARTESIAN_POINT('',(9.000000214576,-6.99,0.799997854233)); +#36945 = VECTOR('',#36946,1.); +#36946 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36947 = ORIENTED_EDGE('',*,*,#36948,.F.); +#36948 = EDGE_CURVE('',#31463,#36941,#36949,.T.); +#36949 = LINE('',#36950,#36951); +#36950 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#36951 = VECTOR('',#36952,1.); +#36952 = DIRECTION('',(0.,0.,-1.)); +#36953 = PLANE('',#36954); +#36954 = AXIS2_PLACEMENT_3D('',#36955,#36956,#36957); +#36955 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#36956 = DIRECTION('',(-0.,-1.,-0.)); +#36957 = DIRECTION('',(1.,-0.,0.)); +#36958 = ADVANCED_FACE('',(#36959),#36977,.T.); +#36959 = FACE_BOUND('',#36960,.F.); +#36960 = EDGE_LOOP('',(#36961,#36962,#36963,#36971)); +#36961 = ORIENTED_EDGE('',*,*,#31462,.F.); +#36962 = ORIENTED_EDGE('',*,*,#36948,.T.); +#36963 = ORIENTED_EDGE('',*,*,#36964,.T.); +#36964 = EDGE_CURVE('',#36941,#36965,#36967,.T.); +#36965 = VERTEX_POINT('',#36966); +#36966 = CARTESIAN_POINT('',(8.550000214576,-7.89,0.799997961521)); +#36967 = LINE('',#36968,#36969); +#36968 = CARTESIAN_POINT('',(8.550000214576,-6.99,0.799997961521)); +#36969 = VECTOR('',#36970,1.); +#36970 = DIRECTION('',(0.,-1.,0.)); +#36971 = ORIENTED_EDGE('',*,*,#36972,.F.); +#36972 = EDGE_CURVE('',#31455,#36965,#36973,.T.); +#36973 = LINE('',#36974,#36975); +#36974 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#36975 = VECTOR('',#36976,1.); +#36976 = DIRECTION('',(0.,0.,-1.)); +#36977 = PLANE('',#36978); +#36978 = AXIS2_PLACEMENT_3D('',#36979,#36980,#36981); +#36979 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#36980 = DIRECTION('',(1.,0.,0.)); +#36981 = DIRECTION('',(-0.,1.,0.)); +#36982 = ADVANCED_FACE('',(#36983),#36994,.T.); +#36983 = FACE_BOUND('',#36984,.F.); +#36984 = EDGE_LOOP('',(#36985,#36986,#36987,#36993)); +#36985 = ORIENTED_EDGE('',*,*,#31454,.F.); +#36986 = ORIENTED_EDGE('',*,*,#36972,.T.); +#36987 = ORIENTED_EDGE('',*,*,#36988,.T.); +#36988 = EDGE_CURVE('',#36965,#34438,#36989,.T.); +#36989 = LINE('',#36990,#36991); +#36990 = CARTESIAN_POINT('',(8.150000214577,-7.89,0.799998056888)); +#36991 = VECTOR('',#36992,1.); +#36992 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36993 = ORIENTED_EDGE('',*,*,#34445,.F.); +#36994 = PLANE('',#36995); +#36995 = AXIS2_PLACEMENT_3D('',#36996,#36997,#36998); +#36996 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#36997 = DIRECTION('',(0.,1.,0.)); +#36998 = DIRECTION('',(-1.,0.,0.)); +#36999 = ADVANCED_FACE('',(#37000),#37028,.T.); +#37000 = FACE_BOUND('',#37001,.T.); +#37001 = EDGE_LOOP('',(#37002,#37013,#37019,#37020,#37021,#37022)); +#37002 = ORIENTED_EDGE('',*,*,#37003,.F.); +#37003 = EDGE_CURVE('',#37004,#37006,#37008,.T.); +#37004 = VERTEX_POINT('',#37005); +#37005 = CARTESIAN_POINT('',(-9.,-8.985,0.8)); +#37006 = VERTEX_POINT('',#37007); +#37007 = CARTESIAN_POINT('',(-9.,-8.435,0.8)); +#37008 = CIRCLE('',#37009,0.275); +#37009 = AXIS2_PLACEMENT_3D('',#37010,#37011,#37012); +#37010 = CARTESIAN_POINT('',(-9.,-8.71,0.8)); +#37011 = DIRECTION('',(0.,0.,1.)); +#37012 = DIRECTION('',(1.,0.,-0.)); +#37013 = ORIENTED_EDGE('',*,*,#37014,.T.); +#37014 = EDGE_CURVE('',#37004,#30943,#37015,.T.); +#37015 = LINE('',#37016,#37017); +#37016 = CARTESIAN_POINT('',(-9.,-8.985,0.8)); +#37017 = VECTOR('',#37018,1.); +#37018 = DIRECTION('',(0.,-1.,0.)); +#37019 = ORIENTED_EDGE('',*,*,#30942,.F.); +#37020 = ORIENTED_EDGE('',*,*,#30934,.F.); +#37021 = ORIENTED_EDGE('',*,*,#30926,.F.); +#37022 = ORIENTED_EDGE('',*,*,#37023,.T.); +#37023 = EDGE_CURVE('',#30919,#37006,#37024,.T.); +#37024 = LINE('',#37025,#37026); +#37025 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#37026 = VECTOR('',#37027,1.); +#37027 = DIRECTION('',(0.,-1.,0.)); +#37028 = PLANE('',#37029); +#37029 = AXIS2_PLACEMENT_3D('',#37030,#37031,#37032); +#37030 = CARTESIAN_POINT('',(-8.571261896074,-8.71,0.8)); +#37031 = DIRECTION('',(0.,0.,1.)); +#37032 = DIRECTION('',(1.,0.,-0.)); +#37033 = ADVANCED_FACE('',(#37034),#37052,.T.); +#37034 = FACE_BOUND('',#37035,.F.); +#37035 = EDGE_LOOP('',(#37036,#37037,#37038,#37046)); +#37036 = ORIENTED_EDGE('',*,*,#31438,.F.); +#37037 = ORIENTED_EDGE('',*,*,#34452,.T.); +#37038 = ORIENTED_EDGE('',*,*,#37039,.T.); +#37039 = EDGE_CURVE('',#34453,#37040,#37042,.T.); +#37040 = VERTEX_POINT('',#37041); +#37041 = CARTESIAN_POINT('',(8.550000214576,-8.26,0.799997961521)); +#37042 = LINE('',#37043,#37044); +#37043 = CARTESIAN_POINT('',(9.000000214576,-8.26,0.799997854233)); +#37044 = VECTOR('',#37045,1.); +#37045 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#37046 = ORIENTED_EDGE('',*,*,#37047,.F.); +#37047 = EDGE_CURVE('',#31431,#37040,#37048,.T.); +#37048 = LINE('',#37049,#37050); +#37049 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#37050 = VECTOR('',#37051,1.); +#37051 = DIRECTION('',(0.,0.,-1.)); +#37052 = PLANE('',#37053); +#37053 = AXIS2_PLACEMENT_3D('',#37054,#37055,#37056); +#37054 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#37055 = DIRECTION('',(-0.,-1.,-0.)); +#37056 = DIRECTION('',(1.,-0.,0.)); +#37057 = ADVANCED_FACE('',(#37058),#37076,.T.); +#37058 = FACE_BOUND('',#37059,.F.); +#37059 = EDGE_LOOP('',(#37060,#37061,#37062,#37070)); +#37060 = ORIENTED_EDGE('',*,*,#31430,.F.); +#37061 = ORIENTED_EDGE('',*,*,#37047,.T.); +#37062 = ORIENTED_EDGE('',*,*,#37063,.T.); +#37063 = EDGE_CURVE('',#37040,#37064,#37066,.T.); +#37064 = VERTEX_POINT('',#37065); +#37065 = CARTESIAN_POINT('',(8.550000214576,-9.16,0.799997961521)); +#37066 = LINE('',#37067,#37068); +#37067 = CARTESIAN_POINT('',(8.550000214576,-8.26,0.799997961521)); +#37068 = VECTOR('',#37069,1.); +#37069 = DIRECTION('',(0.,-1.,0.)); +#37070 = ORIENTED_EDGE('',*,*,#37071,.F.); +#37071 = EDGE_CURVE('',#31423,#37064,#37072,.T.); +#37072 = LINE('',#37073,#37074); +#37073 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#37074 = VECTOR('',#37075,1.); +#37075 = DIRECTION('',(0.,0.,-1.)); +#37076 = PLANE('',#37077); +#37077 = AXIS2_PLACEMENT_3D('',#37078,#37079,#37080); +#37078 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#37079 = DIRECTION('',(1.,0.,0.)); +#37080 = DIRECTION('',(-0.,1.,0.)); +#37081 = ADVANCED_FACE('',(#37082),#37093,.T.); +#37082 = FACE_BOUND('',#37083,.F.); +#37083 = EDGE_LOOP('',(#37084,#37085,#37086,#37092)); +#37084 = ORIENTED_EDGE('',*,*,#31422,.F.); +#37085 = ORIENTED_EDGE('',*,*,#37071,.T.); +#37086 = ORIENTED_EDGE('',*,*,#37087,.T.); +#37087 = EDGE_CURVE('',#37064,#34647,#37088,.T.); +#37088 = LINE('',#37089,#37090); +#37089 = CARTESIAN_POINT('',(8.150000214577,-9.16,0.799998056888)); +#37090 = VECTOR('',#37091,1.); +#37091 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#37092 = ORIENTED_EDGE('',*,*,#34654,.F.); +#37093 = PLANE('',#37094); +#37094 = AXIS2_PLACEMENT_3D('',#37095,#37096,#37097); +#37095 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#37096 = DIRECTION('',(0.,1.,0.)); +#37097 = DIRECTION('',(-1.,0.,0.)); +#37098 = ADVANCED_FACE('',(#37099),#37127,.T.); +#37099 = FACE_BOUND('',#37100,.T.); +#37100 = EDGE_LOOP('',(#37101,#37112,#37118,#37119,#37120,#37121)); +#37101 = ORIENTED_EDGE('',*,*,#37102,.F.); +#37102 = EDGE_CURVE('',#37103,#37105,#37107,.T.); +#37103 = VERTEX_POINT('',#37104); +#37104 = CARTESIAN_POINT('',(-9.,-10.255,0.8)); +#37105 = VERTEX_POINT('',#37106); +#37106 = CARTESIAN_POINT('',(-9.,-9.705,0.8)); +#37107 = CIRCLE('',#37108,0.275); +#37108 = AXIS2_PLACEMENT_3D('',#37109,#37110,#37111); +#37109 = CARTESIAN_POINT('',(-9.,-9.98,0.8)); +#37110 = DIRECTION('',(0.,0.,1.)); +#37111 = DIRECTION('',(1.,0.,-0.)); +#37112 = ORIENTED_EDGE('',*,*,#37113,.T.); +#37113 = EDGE_CURVE('',#37103,#30975,#37114,.T.); +#37114 = LINE('',#37115,#37116); +#37115 = CARTESIAN_POINT('',(-9.,-10.255,0.8)); +#37116 = VECTOR('',#37117,1.); +#37117 = DIRECTION('',(0.,-1.,0.)); +#37118 = ORIENTED_EDGE('',*,*,#30974,.F.); +#37119 = ORIENTED_EDGE('',*,*,#30966,.F.); +#37120 = ORIENTED_EDGE('',*,*,#30958,.F.); +#37121 = ORIENTED_EDGE('',*,*,#37122,.T.); +#37122 = EDGE_CURVE('',#30951,#37105,#37123,.T.); +#37123 = LINE('',#37124,#37125); +#37124 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#37125 = VECTOR('',#37126,1.); +#37126 = DIRECTION('',(0.,-1.,0.)); +#37127 = PLANE('',#37128); +#37128 = AXIS2_PLACEMENT_3D('',#37129,#37130,#37131); +#37129 = CARTESIAN_POINT('',(-8.571261896074,-9.98,0.8)); +#37130 = DIRECTION('',(0.,0.,1.)); +#37131 = DIRECTION('',(1.,0.,-0.)); +#37132 = ADVANCED_FACE('',(#37133),#37151,.T.); +#37133 = FACE_BOUND('',#37134,.F.); +#37134 = EDGE_LOOP('',(#37135,#37136,#37137,#37145)); +#37135 = ORIENTED_EDGE('',*,*,#31406,.F.); +#37136 = ORIENTED_EDGE('',*,*,#34661,.T.); +#37137 = ORIENTED_EDGE('',*,*,#37138,.T.); +#37138 = EDGE_CURVE('',#34662,#37139,#37141,.T.); +#37139 = VERTEX_POINT('',#37140); +#37140 = CARTESIAN_POINT('',(8.550000214576,-9.53,0.799997961521)); +#37141 = LINE('',#37142,#37143); +#37142 = CARTESIAN_POINT('',(9.000000214576,-9.53,0.799997854233)); +#37143 = VECTOR('',#37144,1.); +#37144 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#37145 = ORIENTED_EDGE('',*,*,#37146,.F.); +#37146 = EDGE_CURVE('',#31399,#37139,#37147,.T.); +#37147 = LINE('',#37148,#37149); +#37148 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#37149 = VECTOR('',#37150,1.); +#37150 = DIRECTION('',(0.,0.,-1.)); +#37151 = PLANE('',#37152); +#37152 = AXIS2_PLACEMENT_3D('',#37153,#37154,#37155); +#37153 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#37154 = DIRECTION('',(-0.,-1.,-0.)); +#37155 = DIRECTION('',(1.,-0.,0.)); +#37156 = ADVANCED_FACE('',(#37157),#37175,.T.); +#37157 = FACE_BOUND('',#37158,.F.); +#37158 = EDGE_LOOP('',(#37159,#37160,#37161,#37169)); +#37159 = ORIENTED_EDGE('',*,*,#31398,.F.); +#37160 = ORIENTED_EDGE('',*,*,#37146,.T.); +#37161 = ORIENTED_EDGE('',*,*,#37162,.T.); +#37162 = EDGE_CURVE('',#37139,#37163,#37165,.T.); +#37163 = VERTEX_POINT('',#37164); +#37164 = CARTESIAN_POINT('',(8.550000214576,-10.43,0.799997961521)); +#37165 = LINE('',#37166,#37167); +#37166 = CARTESIAN_POINT('',(8.550000214576,-9.53,0.799997961521)); +#37167 = VECTOR('',#37168,1.); +#37168 = DIRECTION('',(0.,-1.,0.)); +#37169 = ORIENTED_EDGE('',*,*,#37170,.F.); +#37170 = EDGE_CURVE('',#31391,#37163,#37171,.T.); +#37171 = LINE('',#37172,#37173); +#37172 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#37173 = VECTOR('',#37174,1.); +#37174 = DIRECTION('',(0.,0.,-1.)); +#37175 = PLANE('',#37176); +#37176 = AXIS2_PLACEMENT_3D('',#37177,#37178,#37179); +#37177 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#37178 = DIRECTION('',(1.,0.,0.)); +#37179 = DIRECTION('',(-0.,1.,0.)); +#37180 = ADVANCED_FACE('',(#37181),#37192,.T.); +#37181 = FACE_BOUND('',#37182,.F.); +#37182 = EDGE_LOOP('',(#37183,#37184,#37185,#37191)); +#37183 = ORIENTED_EDGE('',*,*,#31390,.F.); +#37184 = ORIENTED_EDGE('',*,*,#37170,.T.); +#37185 = ORIENTED_EDGE('',*,*,#37186,.T.); +#37186 = EDGE_CURVE('',#37163,#34856,#37187,.T.); +#37187 = LINE('',#37188,#37189); +#37188 = CARTESIAN_POINT('',(8.150000214577,-10.43,0.799998056888)); +#37189 = VECTOR('',#37190,1.); +#37190 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#37191 = ORIENTED_EDGE('',*,*,#34863,.F.); +#37192 = PLANE('',#37193); +#37193 = AXIS2_PLACEMENT_3D('',#37194,#37195,#37196); +#37194 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#37195 = DIRECTION('',(0.,1.,0.)); +#37196 = DIRECTION('',(-1.,0.,0.)); +#37197 = ADVANCED_FACE('',(#37198),#37226,.T.); +#37198 = FACE_BOUND('',#37199,.T.); +#37199 = EDGE_LOOP('',(#37200,#37211,#37217,#37218,#37219,#37220)); +#37200 = ORIENTED_EDGE('',*,*,#37201,.F.); +#37201 = EDGE_CURVE('',#37202,#37204,#37206,.T.); +#37202 = VERTEX_POINT('',#37203); +#37203 = CARTESIAN_POINT('',(-9.,-11.525,0.8)); +#37204 = VERTEX_POINT('',#37205); +#37205 = CARTESIAN_POINT('',(-9.,-10.975,0.8)); +#37206 = CIRCLE('',#37207,0.275); +#37207 = AXIS2_PLACEMENT_3D('',#37208,#37209,#37210); +#37208 = CARTESIAN_POINT('',(-9.,-11.25,0.8)); +#37209 = DIRECTION('',(0.,0.,1.)); +#37210 = DIRECTION('',(1.,0.,-0.)); +#37211 = ORIENTED_EDGE('',*,*,#37212,.T.); +#37212 = EDGE_CURVE('',#37202,#31007,#37213,.T.); +#37213 = LINE('',#37214,#37215); +#37214 = CARTESIAN_POINT('',(-9.,-11.525,0.8)); +#37215 = VECTOR('',#37216,1.); +#37216 = DIRECTION('',(0.,-1.,0.)); +#37217 = ORIENTED_EDGE('',*,*,#31006,.F.); +#37218 = ORIENTED_EDGE('',*,*,#30998,.F.); +#37219 = ORIENTED_EDGE('',*,*,#30990,.F.); +#37220 = ORIENTED_EDGE('',*,*,#37221,.T.); +#37221 = EDGE_CURVE('',#30983,#37204,#37222,.T.); +#37222 = LINE('',#37223,#37224); +#37223 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#37224 = VECTOR('',#37225,1.); +#37225 = DIRECTION('',(0.,-1.,0.)); +#37226 = PLANE('',#37227); +#37227 = AXIS2_PLACEMENT_3D('',#37228,#37229,#37230); +#37228 = CARTESIAN_POINT('',(-8.571261896074,-11.25,0.8)); +#37229 = DIRECTION('',(0.,0.,1.)); +#37230 = DIRECTION('',(1.,0.,-0.)); +#37231 = ADVANCED_FACE('',(#37232),#37250,.T.); +#37232 = FACE_BOUND('',#37233,.F.); +#37233 = EDGE_LOOP('',(#37234,#37235,#37236,#37244)); +#37234 = ORIENTED_EDGE('',*,*,#31374,.F.); +#37235 = ORIENTED_EDGE('',*,*,#34870,.T.); +#37236 = ORIENTED_EDGE('',*,*,#37237,.T.); +#37237 = EDGE_CURVE('',#34871,#37238,#37240,.T.); +#37238 = VERTEX_POINT('',#37239); +#37239 = CARTESIAN_POINT('',(8.550000214576,-10.8,0.799997961521)); +#37240 = LINE('',#37241,#37242); +#37241 = CARTESIAN_POINT('',(9.000000214576,-10.8,0.799997854233)); +#37242 = VECTOR('',#37243,1.); +#37243 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#37244 = ORIENTED_EDGE('',*,*,#37245,.F.); +#37245 = EDGE_CURVE('',#31367,#37238,#37246,.T.); +#37246 = LINE('',#37247,#37248); +#37247 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#37248 = VECTOR('',#37249,1.); +#37249 = DIRECTION('',(0.,0.,-1.)); +#37250 = PLANE('',#37251); +#37251 = AXIS2_PLACEMENT_3D('',#37252,#37253,#37254); +#37252 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#37253 = DIRECTION('',(-0.,-1.,-0.)); +#37254 = DIRECTION('',(1.,-0.,0.)); +#37255 = ADVANCED_FACE('',(#37256),#37274,.T.); +#37256 = FACE_BOUND('',#37257,.F.); +#37257 = EDGE_LOOP('',(#37258,#37259,#37260,#37268)); +#37258 = ORIENTED_EDGE('',*,*,#31366,.F.); +#37259 = ORIENTED_EDGE('',*,*,#37245,.T.); +#37260 = ORIENTED_EDGE('',*,*,#37261,.T.); +#37261 = EDGE_CURVE('',#37238,#37262,#37264,.T.); +#37262 = VERTEX_POINT('',#37263); +#37263 = CARTESIAN_POINT('',(8.550000214576,-11.7,0.799997961521)); +#37264 = LINE('',#37265,#37266); +#37265 = CARTESIAN_POINT('',(8.550000214576,-10.8,0.799997961521)); +#37266 = VECTOR('',#37267,1.); +#37267 = DIRECTION('',(0.,-1.,0.)); +#37268 = ORIENTED_EDGE('',*,*,#37269,.F.); +#37269 = EDGE_CURVE('',#31359,#37262,#37270,.T.); +#37270 = LINE('',#37271,#37272); +#37271 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#37272 = VECTOR('',#37273,1.); +#37273 = DIRECTION('',(0.,0.,-1.)); +#37274 = PLANE('',#37275); +#37275 = AXIS2_PLACEMENT_3D('',#37276,#37277,#37278); +#37276 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#37277 = DIRECTION('',(1.,0.,0.)); +#37278 = DIRECTION('',(-0.,1.,0.)); +#37279 = ADVANCED_FACE('',(#37280),#37291,.T.); +#37280 = FACE_BOUND('',#37281,.F.); +#37281 = EDGE_LOOP('',(#37282,#37283,#37284,#37290)); +#37282 = ORIENTED_EDGE('',*,*,#31358,.F.); +#37283 = ORIENTED_EDGE('',*,*,#37269,.T.); +#37284 = ORIENTED_EDGE('',*,*,#37285,.T.); +#37285 = EDGE_CURVE('',#37262,#35057,#37286,.T.); +#37286 = LINE('',#37287,#37288); +#37287 = CARTESIAN_POINT('',(8.150000214577,-11.7,0.799998056888)); +#37288 = VECTOR('',#37289,1.); +#37289 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#37290 = ORIENTED_EDGE('',*,*,#35064,.F.); +#37291 = PLANE('',#37292); +#37292 = AXIS2_PLACEMENT_3D('',#37293,#37294,#37295); +#37293 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#37294 = DIRECTION('',(0.,1.,0.)); +#37295 = DIRECTION('',(-1.,0.,0.)); +#37296 = ADVANCED_FACE('',(#37297),#37325,.T.); +#37297 = FACE_BOUND('',#37298,.T.); +#37298 = EDGE_LOOP('',(#37299,#37310,#37316,#37317,#37318,#37319)); +#37299 = ORIENTED_EDGE('',*,*,#37300,.F.); +#37300 = EDGE_CURVE('',#37301,#37303,#37305,.T.); +#37301 = VERTEX_POINT('',#37302); +#37302 = CARTESIAN_POINT('',(-5.44,-12.75,0.8)); +#37303 = VERTEX_POINT('',#37304); +#37304 = CARTESIAN_POINT('',(-5.99,-12.75,0.8)); +#37305 = CIRCLE('',#37306,0.275); +#37306 = AXIS2_PLACEMENT_3D('',#37307,#37308,#37309); +#37307 = CARTESIAN_POINT('',(-5.715,-12.75,0.8)); +#37308 = DIRECTION('',(0.,-0.,1.)); +#37309 = DIRECTION('',(0.,1.,0.)); +#37310 = ORIENTED_EDGE('',*,*,#37311,.T.); +#37311 = EDGE_CURVE('',#37301,#31047,#37312,.T.); +#37312 = LINE('',#37313,#37314); +#37313 = CARTESIAN_POINT('',(-5.44,-12.75,0.8)); +#37314 = VECTOR('',#37315,1.); +#37315 = DIRECTION('',(1.,0.,0.)); +#37316 = ORIENTED_EDGE('',*,*,#31046,.F.); +#37317 = ORIENTED_EDGE('',*,*,#31038,.F.); +#37318 = ORIENTED_EDGE('',*,*,#31030,.F.); +#37319 = ORIENTED_EDGE('',*,*,#37320,.T.); +#37320 = EDGE_CURVE('',#31023,#37303,#37321,.T.); +#37321 = LINE('',#37322,#37323); +#37322 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#37323 = VECTOR('',#37324,1.); +#37324 = DIRECTION('',(1.,0.,0.)); +#37325 = PLANE('',#37326); +#37326 = AXIS2_PLACEMENT_3D('',#37327,#37328,#37329); +#37327 = CARTESIAN_POINT('',(-5.715,-12.32126189607,0.8)); +#37328 = DIRECTION('',(0.,0.,1.)); +#37329 = DIRECTION('',(0.,1.,0.)); +#37330 = ADVANCED_FACE('',(#37331),#37359,.T.); +#37331 = FACE_BOUND('',#37332,.T.); +#37332 = EDGE_LOOP('',(#37333,#37344,#37350,#37351,#37352,#37353)); +#37333 = ORIENTED_EDGE('',*,*,#37334,.F.); +#37334 = EDGE_CURVE('',#37335,#37337,#37339,.T.); +#37335 = VERTEX_POINT('',#37336); +#37336 = CARTESIAN_POINT('',(5.99,-12.75,0.8)); +#37337 = VERTEX_POINT('',#37338); +#37338 = CARTESIAN_POINT('',(5.44,-12.75,0.8)); +#37339 = CIRCLE('',#37340,0.275); +#37340 = AXIS2_PLACEMENT_3D('',#37341,#37342,#37343); +#37341 = CARTESIAN_POINT('',(5.715,-12.75,0.8)); +#37342 = DIRECTION('',(0.,-0.,1.)); +#37343 = DIRECTION('',(0.,1.,0.)); +#37344 = ORIENTED_EDGE('',*,*,#37345,.T.); +#37345 = EDGE_CURVE('',#37335,#31335,#37346,.T.); +#37346 = LINE('',#37347,#37348); +#37347 = CARTESIAN_POINT('',(5.99,-12.75,0.8)); +#37348 = VECTOR('',#37349,1.); +#37349 = DIRECTION('',(1.,0.,0.)); +#37350 = ORIENTED_EDGE('',*,*,#31334,.T.); +#37351 = ORIENTED_EDGE('',*,*,#31326,.T.); +#37352 = ORIENTED_EDGE('',*,*,#31318,.T.); +#37353 = ORIENTED_EDGE('',*,*,#37354,.T.); +#37354 = EDGE_CURVE('',#31311,#37337,#37355,.T.); +#37355 = LINE('',#37356,#37357); +#37356 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#37357 = VECTOR('',#37358,1.); +#37358 = DIRECTION('',(1.,0.,0.)); +#37359 = PLANE('',#37360); +#37360 = AXIS2_PLACEMENT_3D('',#37361,#37362,#37363); +#37361 = CARTESIAN_POINT('',(5.715,-12.32126189607,0.8)); +#37362 = DIRECTION('',(0.,0.,1.)); +#37363 = DIRECTION('',(0.,1.,0.)); +#37364 = ADVANCED_FACE('',(#37365),#37393,.T.); +#37365 = FACE_BOUND('',#37366,.T.); +#37366 = EDGE_LOOP('',(#37367,#37378,#37384,#37385,#37386,#37387)); +#37367 = ORIENTED_EDGE('',*,*,#37368,.F.); +#37368 = EDGE_CURVE('',#37369,#37371,#37373,.T.); +#37369 = VERTEX_POINT('',#37370); +#37370 = CARTESIAN_POINT('',(-4.17,-12.75,0.8)); +#37371 = VERTEX_POINT('',#37372); +#37372 = CARTESIAN_POINT('',(-4.72,-12.75,0.8)); +#37373 = CIRCLE('',#37374,0.275); +#37374 = AXIS2_PLACEMENT_3D('',#37375,#37376,#37377); +#37375 = CARTESIAN_POINT('',(-4.445,-12.75,0.8)); +#37376 = DIRECTION('',(0.,-0.,1.)); +#37377 = DIRECTION('',(0.,1.,0.)); +#37378 = ORIENTED_EDGE('',*,*,#37379,.T.); +#37379 = EDGE_CURVE('',#37369,#31079,#37380,.T.); +#37380 = LINE('',#37381,#37382); +#37381 = CARTESIAN_POINT('',(-4.17,-12.75,0.8)); +#37382 = VECTOR('',#37383,1.); +#37383 = DIRECTION('',(1.,0.,0.)); +#37384 = ORIENTED_EDGE('',*,*,#31078,.F.); +#37385 = ORIENTED_EDGE('',*,*,#31070,.F.); +#37386 = ORIENTED_EDGE('',*,*,#31062,.F.); +#37387 = ORIENTED_EDGE('',*,*,#37388,.T.); +#37388 = EDGE_CURVE('',#31055,#37371,#37389,.T.); +#37389 = LINE('',#37390,#37391); +#37390 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#37391 = VECTOR('',#37392,1.); +#37392 = DIRECTION('',(1.,0.,0.)); +#37393 = PLANE('',#37394); +#37394 = AXIS2_PLACEMENT_3D('',#37395,#37396,#37397); +#37395 = CARTESIAN_POINT('',(-4.445,-12.32126189607,0.8)); +#37396 = DIRECTION('',(0.,0.,1.)); +#37397 = DIRECTION('',(0.,1.,0.)); +#37398 = ADVANCED_FACE('',(#37399),#37427,.T.); +#37399 = FACE_BOUND('',#37400,.T.); +#37400 = EDGE_LOOP('',(#37401,#37412,#37418,#37419,#37420,#37421)); +#37401 = ORIENTED_EDGE('',*,*,#37402,.F.); +#37402 = EDGE_CURVE('',#37403,#37405,#37407,.T.); +#37403 = VERTEX_POINT('',#37404); +#37404 = CARTESIAN_POINT('',(4.72,-12.75,0.8)); +#37405 = VERTEX_POINT('',#37406); +#37406 = CARTESIAN_POINT('',(4.17,-12.75,0.8)); +#37407 = CIRCLE('',#37408,0.275); +#37408 = AXIS2_PLACEMENT_3D('',#37409,#37410,#37411); +#37409 = CARTESIAN_POINT('',(4.445,-12.75,0.8)); +#37410 = DIRECTION('',(0.,-0.,1.)); +#37411 = DIRECTION('',(0.,1.,0.)); +#37412 = ORIENTED_EDGE('',*,*,#37413,.T.); +#37413 = EDGE_CURVE('',#37403,#31303,#37414,.T.); +#37414 = LINE('',#37415,#37416); +#37415 = CARTESIAN_POINT('',(4.72,-12.75,0.8)); +#37416 = VECTOR('',#37417,1.); +#37417 = DIRECTION('',(1.,0.,0.)); +#37418 = ORIENTED_EDGE('',*,*,#31302,.T.); +#37419 = ORIENTED_EDGE('',*,*,#31294,.T.); +#37420 = ORIENTED_EDGE('',*,*,#31286,.T.); +#37421 = ORIENTED_EDGE('',*,*,#37422,.T.); +#37422 = EDGE_CURVE('',#31279,#37405,#37423,.T.); +#37423 = LINE('',#37424,#37425); +#37424 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#37425 = VECTOR('',#37426,1.); +#37426 = DIRECTION('',(1.,0.,0.)); +#37427 = PLANE('',#37428); +#37428 = AXIS2_PLACEMENT_3D('',#37429,#37430,#37431); +#37429 = CARTESIAN_POINT('',(4.445,-12.32126189607,0.8)); +#37430 = DIRECTION('',(0.,0.,1.)); +#37431 = DIRECTION('',(0.,1.,0.)); +#37432 = ADVANCED_FACE('',(#37433),#37461,.T.); +#37433 = FACE_BOUND('',#37434,.T.); +#37434 = EDGE_LOOP('',(#37435,#37446,#37452,#37453,#37454,#37455)); +#37435 = ORIENTED_EDGE('',*,*,#37436,.F.); +#37436 = EDGE_CURVE('',#37437,#37439,#37441,.T.); +#37437 = VERTEX_POINT('',#37438); +#37438 = CARTESIAN_POINT('',(-2.9,-12.75,0.8)); +#37439 = VERTEX_POINT('',#37440); +#37440 = CARTESIAN_POINT('',(-3.45,-12.75,0.8)); +#37441 = CIRCLE('',#37442,0.275); +#37442 = AXIS2_PLACEMENT_3D('',#37443,#37444,#37445); +#37443 = CARTESIAN_POINT('',(-3.175,-12.75,0.8)); +#37444 = DIRECTION('',(0.,-0.,1.)); +#37445 = DIRECTION('',(0.,1.,0.)); +#37446 = ORIENTED_EDGE('',*,*,#37447,.T.); +#37447 = EDGE_CURVE('',#37437,#31111,#37448,.T.); +#37448 = LINE('',#37449,#37450); +#37449 = CARTESIAN_POINT('',(-2.9,-12.75,0.8)); +#37450 = VECTOR('',#37451,1.); +#37451 = DIRECTION('',(1.,0.,0.)); +#37452 = ORIENTED_EDGE('',*,*,#31110,.F.); +#37453 = ORIENTED_EDGE('',*,*,#31102,.F.); +#37454 = ORIENTED_EDGE('',*,*,#31094,.F.); +#37455 = ORIENTED_EDGE('',*,*,#37456,.T.); +#37456 = EDGE_CURVE('',#31087,#37439,#37457,.T.); +#37457 = LINE('',#37458,#37459); +#37458 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#37459 = VECTOR('',#37460,1.); +#37460 = DIRECTION('',(1.,0.,0.)); +#37461 = PLANE('',#37462); +#37462 = AXIS2_PLACEMENT_3D('',#37463,#37464,#37465); +#37463 = CARTESIAN_POINT('',(-3.175,-12.32126189607,0.8)); +#37464 = DIRECTION('',(0.,0.,1.)); +#37465 = DIRECTION('',(0.,1.,0.)); +#37466 = ADVANCED_FACE('',(#37467),#37495,.T.); +#37467 = FACE_BOUND('',#37468,.T.); +#37468 = EDGE_LOOP('',(#37469,#37480,#37486,#37487,#37488,#37489)); +#37469 = ORIENTED_EDGE('',*,*,#37470,.F.); +#37470 = EDGE_CURVE('',#37471,#37473,#37475,.T.); +#37471 = VERTEX_POINT('',#37472); +#37472 = CARTESIAN_POINT('',(3.45,-12.75,0.8)); +#37473 = VERTEX_POINT('',#37474); +#37474 = CARTESIAN_POINT('',(2.9,-12.75,0.8)); +#37475 = CIRCLE('',#37476,0.275); +#37476 = AXIS2_PLACEMENT_3D('',#37477,#37478,#37479); +#37477 = CARTESIAN_POINT('',(3.175,-12.75,0.8)); +#37478 = DIRECTION('',(0.,-0.,1.)); +#37479 = DIRECTION('',(0.,1.,0.)); +#37480 = ORIENTED_EDGE('',*,*,#37481,.T.); +#37481 = EDGE_CURVE('',#37471,#31271,#37482,.T.); +#37482 = LINE('',#37483,#37484); +#37483 = CARTESIAN_POINT('',(3.45,-12.75,0.8)); +#37484 = VECTOR('',#37485,1.); +#37485 = DIRECTION('',(1.,0.,0.)); +#37486 = ORIENTED_EDGE('',*,*,#31270,.T.); +#37487 = ORIENTED_EDGE('',*,*,#31262,.T.); +#37488 = ORIENTED_EDGE('',*,*,#31254,.T.); +#37489 = ORIENTED_EDGE('',*,*,#37490,.T.); +#37490 = EDGE_CURVE('',#31247,#37473,#37491,.T.); +#37491 = LINE('',#37492,#37493); +#37492 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#37493 = VECTOR('',#37494,1.); +#37494 = DIRECTION('',(1.,0.,0.)); +#37495 = PLANE('',#37496); +#37496 = AXIS2_PLACEMENT_3D('',#37497,#37498,#37499); +#37497 = CARTESIAN_POINT('',(3.175,-12.32126189607,0.8)); +#37498 = DIRECTION('',(0.,0.,1.)); +#37499 = DIRECTION('',(0.,1.,0.)); +#37500 = ADVANCED_FACE('',(#37501),#37529,.T.); +#37501 = FACE_BOUND('',#37502,.T.); +#37502 = EDGE_LOOP('',(#37503,#37514,#37520,#37521,#37522,#37523)); +#37503 = ORIENTED_EDGE('',*,*,#37504,.F.); +#37504 = EDGE_CURVE('',#37505,#37507,#37509,.T.); +#37505 = VERTEX_POINT('',#37506); +#37506 = CARTESIAN_POINT('',(-1.63,-12.75,0.8)); +#37507 = VERTEX_POINT('',#37508); +#37508 = CARTESIAN_POINT('',(-2.18,-12.75,0.8)); +#37509 = CIRCLE('',#37510,0.275); +#37510 = AXIS2_PLACEMENT_3D('',#37511,#37512,#37513); +#37511 = CARTESIAN_POINT('',(-1.905,-12.75,0.8)); +#37512 = DIRECTION('',(0.,-0.,1.)); +#37513 = DIRECTION('',(0.,1.,0.)); +#37514 = ORIENTED_EDGE('',*,*,#37515,.T.); +#37515 = EDGE_CURVE('',#37505,#31143,#37516,.T.); +#37516 = LINE('',#37517,#37518); +#37517 = CARTESIAN_POINT('',(-1.63,-12.75,0.8)); +#37518 = VECTOR('',#37519,1.); +#37519 = DIRECTION('',(1.,0.,0.)); +#37520 = ORIENTED_EDGE('',*,*,#31142,.F.); +#37521 = ORIENTED_EDGE('',*,*,#31134,.F.); +#37522 = ORIENTED_EDGE('',*,*,#31126,.F.); +#37523 = ORIENTED_EDGE('',*,*,#37524,.T.); +#37524 = EDGE_CURVE('',#31119,#37507,#37525,.T.); +#37525 = LINE('',#37526,#37527); +#37526 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#37527 = VECTOR('',#37528,1.); +#37528 = DIRECTION('',(1.,0.,0.)); +#37529 = PLANE('',#37530); +#37530 = AXIS2_PLACEMENT_3D('',#37531,#37532,#37533); +#37531 = CARTESIAN_POINT('',(-1.905,-12.32126189607,0.8)); +#37532 = DIRECTION('',(0.,0.,1.)); +#37533 = DIRECTION('',(0.,1.,0.)); +#37534 = ADVANCED_FACE('',(#37535),#37563,.T.); +#37535 = FACE_BOUND('',#37536,.T.); +#37536 = EDGE_LOOP('',(#37537,#37548,#37554,#37555,#37556,#37557)); +#37537 = ORIENTED_EDGE('',*,*,#37538,.F.); +#37538 = EDGE_CURVE('',#37539,#37541,#37543,.T.); +#37539 = VERTEX_POINT('',#37540); +#37540 = CARTESIAN_POINT('',(2.18,-12.75,0.8)); +#37541 = VERTEX_POINT('',#37542); +#37542 = CARTESIAN_POINT('',(1.63,-12.75,0.8)); +#37543 = CIRCLE('',#37544,0.275); +#37544 = AXIS2_PLACEMENT_3D('',#37545,#37546,#37547); +#37545 = CARTESIAN_POINT('',(1.905,-12.75,0.8)); +#37546 = DIRECTION('',(0.,-0.,1.)); +#37547 = DIRECTION('',(0.,1.,0.)); +#37548 = ORIENTED_EDGE('',*,*,#37549,.T.); +#37549 = EDGE_CURVE('',#37539,#31239,#37550,.T.); +#37550 = LINE('',#37551,#37552); +#37551 = CARTESIAN_POINT('',(2.18,-12.75,0.8)); +#37552 = VECTOR('',#37553,1.); +#37553 = DIRECTION('',(1.,0.,0.)); +#37554 = ORIENTED_EDGE('',*,*,#31238,.T.); +#37555 = ORIENTED_EDGE('',*,*,#31230,.T.); +#37556 = ORIENTED_EDGE('',*,*,#31222,.T.); +#37557 = ORIENTED_EDGE('',*,*,#37558,.T.); +#37558 = EDGE_CURVE('',#31215,#37541,#37559,.T.); +#37559 = LINE('',#37560,#37561); +#37560 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#37561 = VECTOR('',#37562,1.); +#37562 = DIRECTION('',(1.,0.,0.)); +#37563 = PLANE('',#37564); +#37564 = AXIS2_PLACEMENT_3D('',#37565,#37566,#37567); +#37565 = CARTESIAN_POINT('',(1.905,-12.32126189607,0.8)); +#37566 = DIRECTION('',(0.,0.,1.)); +#37567 = DIRECTION('',(0.,1.,0.)); +#37568 = ADVANCED_FACE('',(#37569),#37597,.T.); +#37569 = FACE_BOUND('',#37570,.T.); +#37570 = EDGE_LOOP('',(#37571,#37582,#37588,#37589,#37590,#37591)); +#37571 = ORIENTED_EDGE('',*,*,#37572,.F.); +#37572 = EDGE_CURVE('',#37573,#37575,#37577,.T.); +#37573 = VERTEX_POINT('',#37574); +#37574 = CARTESIAN_POINT('',(-0.36,-12.75,0.8)); +#37575 = VERTEX_POINT('',#37576); +#37576 = CARTESIAN_POINT('',(-0.91,-12.75,0.8)); +#37577 = CIRCLE('',#37578,0.275); +#37578 = AXIS2_PLACEMENT_3D('',#37579,#37580,#37581); +#37579 = CARTESIAN_POINT('',(-0.635,-12.75,0.8)); +#37580 = DIRECTION('',(0.,-0.,1.)); +#37581 = DIRECTION('',(0.,1.,0.)); +#37582 = ORIENTED_EDGE('',*,*,#37583,.T.); +#37583 = EDGE_CURVE('',#37573,#31175,#37584,.T.); +#37584 = LINE('',#37585,#37586); +#37585 = CARTESIAN_POINT('',(-0.36,-12.75,0.8)); +#37586 = VECTOR('',#37587,1.); +#37587 = DIRECTION('',(1.,0.,0.)); +#37588 = ORIENTED_EDGE('',*,*,#31174,.F.); +#37589 = ORIENTED_EDGE('',*,*,#31166,.F.); +#37590 = ORIENTED_EDGE('',*,*,#31158,.F.); +#37591 = ORIENTED_EDGE('',*,*,#37592,.T.); +#37592 = EDGE_CURVE('',#31151,#37575,#37593,.T.); +#37593 = LINE('',#37594,#37595); +#37594 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#37595 = VECTOR('',#37596,1.); +#37596 = DIRECTION('',(1.,0.,0.)); +#37597 = PLANE('',#37598); +#37598 = AXIS2_PLACEMENT_3D('',#37599,#37600,#37601); +#37599 = CARTESIAN_POINT('',(-0.635,-12.32126189607,0.8)); +#37600 = DIRECTION('',(0.,0.,1.)); +#37601 = DIRECTION('',(0.,1.,0.)); +#37602 = ADVANCED_FACE('',(#37603),#37631,.T.); +#37603 = FACE_BOUND('',#37604,.T.); +#37604 = EDGE_LOOP('',(#37605,#37616,#37622,#37623,#37624,#37625)); +#37605 = ORIENTED_EDGE('',*,*,#37606,.F.); +#37606 = EDGE_CURVE('',#37607,#37609,#37611,.T.); +#37607 = VERTEX_POINT('',#37608); +#37608 = CARTESIAN_POINT('',(0.91,-12.75,0.8)); +#37609 = VERTEX_POINT('',#37610); +#37610 = CARTESIAN_POINT('',(0.36,-12.75,0.8)); +#37611 = CIRCLE('',#37612,0.275); +#37612 = AXIS2_PLACEMENT_3D('',#37613,#37614,#37615); +#37613 = CARTESIAN_POINT('',(0.635,-12.75,0.8)); +#37614 = DIRECTION('',(0.,-0.,1.)); +#37615 = DIRECTION('',(0.,1.,0.)); +#37616 = ORIENTED_EDGE('',*,*,#37617,.T.); +#37617 = EDGE_CURVE('',#37607,#31207,#37618,.T.); +#37618 = LINE('',#37619,#37620); +#37619 = CARTESIAN_POINT('',(0.91,-12.75,0.8)); +#37620 = VECTOR('',#37621,1.); +#37621 = DIRECTION('',(1.,0.,0.)); +#37622 = ORIENTED_EDGE('',*,*,#31206,.T.); +#37623 = ORIENTED_EDGE('',*,*,#31198,.T.); +#37624 = ORIENTED_EDGE('',*,*,#31190,.T.); +#37625 = ORIENTED_EDGE('',*,*,#37626,.T.); +#37626 = EDGE_CURVE('',#31183,#37609,#37627,.T.); +#37627 = LINE('',#37628,#37629); +#37628 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#37629 = VECTOR('',#37630,1.); +#37630 = DIRECTION('',(1.,0.,0.)); +#37631 = PLANE('',#37632); +#37632 = AXIS2_PLACEMENT_3D('',#37633,#37634,#37635); +#37633 = CARTESIAN_POINT('',(0.635,-12.32126189607,0.8)); +#37634 = DIRECTION('',(0.,0.,1.)); +#37635 = DIRECTION('',(0.,1.,0.)); +#37636 = ADVANCED_FACE('',(#37637),#37663,.T.); +#37637 = FACE_BOUND('',#37638,.T.); +#37638 = EDGE_LOOP('',(#37639,#37640,#37648,#37657)); +#37639 = ORIENTED_EDGE('',*,*,#31799,.T.); +#37640 = ORIENTED_EDGE('',*,*,#37641,.T.); +#37641 = EDGE_CURVE('',#31802,#37642,#37644,.T.); +#37642 = VERTEX_POINT('',#37643); +#37643 = CARTESIAN_POINT('',(-7.9,5.65,2.85)); +#37644 = LINE('',#37645,#37646); +#37645 = CARTESIAN_POINT('',(-7.9,5.65,0.8)); +#37646 = VECTOR('',#37647,1.); +#37647 = DIRECTION('',(0.,0.,1.)); +#37648 = ORIENTED_EDGE('',*,*,#37649,.T.); +#37649 = EDGE_CURVE('',#37642,#37650,#37652,.T.); +#37650 = VERTEX_POINT('',#37651); +#37651 = CARTESIAN_POINT('',(-7.65,5.9,2.85)); +#37652 = CIRCLE('',#37653,0.25); +#37653 = AXIS2_PLACEMENT_3D('',#37654,#37655,#37656); +#37654 = CARTESIAN_POINT('',(-7.65,5.65,2.85)); +#37655 = DIRECTION('',(0.,0.,-1.)); +#37656 = DIRECTION('',(0.,1.,0.)); +#37657 = ORIENTED_EDGE('',*,*,#37658,.F.); +#37658 = EDGE_CURVE('',#31800,#37650,#37659,.T.); +#37659 = LINE('',#37660,#37661); +#37660 = CARTESIAN_POINT('',(-7.65,5.9,0.8)); +#37661 = VECTOR('',#37662,1.); +#37662 = DIRECTION('',(0.,0.,1.)); +#37663 = CYLINDRICAL_SURFACE('',#37664,0.25); +#37664 = AXIS2_PLACEMENT_3D('',#37665,#37666,#37667); +#37665 = CARTESIAN_POINT('',(-7.65,5.65,0.8)); +#37666 = DIRECTION('',(0.,0.,1.)); +#37667 = DIRECTION('',(0.,1.,0.)); +#37668 = ADVANCED_FACE('',(#37669),#37687,.T.); +#37669 = FACE_BOUND('',#37670,.T.); +#37670 = EDGE_LOOP('',(#37671,#37672,#37680,#37686)); +#37671 = ORIENTED_EDGE('',*,*,#31861,.F.); +#37672 = ORIENTED_EDGE('',*,*,#37673,.T.); +#37673 = EDGE_CURVE('',#31853,#37674,#37676,.T.); +#37674 = VERTEX_POINT('',#37675); +#37675 = CARTESIAN_POINT('',(-7.9,-11.45,2.85)); +#37676 = LINE('',#37677,#37678); +#37677 = CARTESIAN_POINT('',(-7.9,-11.45,0.8)); +#37678 = VECTOR('',#37679,1.); +#37679 = DIRECTION('',(0.,0.,1.)); +#37680 = ORIENTED_EDGE('',*,*,#37681,.T.); +#37681 = EDGE_CURVE('',#37674,#37642,#37682,.T.); +#37682 = LINE('',#37683,#37684); +#37683 = CARTESIAN_POINT('',(-7.9,-11.7,2.85)); +#37684 = VECTOR('',#37685,1.); +#37685 = DIRECTION('',(0.,1.,0.)); +#37686 = ORIENTED_EDGE('',*,*,#37641,.F.); +#37687 = PLANE('',#37688); +#37688 = AXIS2_PLACEMENT_3D('',#37689,#37690,#37691); +#37689 = CARTESIAN_POINT('',(-7.9,-11.7,0.8)); +#37690 = DIRECTION('',(-1.,0.,0.)); +#37691 = DIRECTION('',(0.,1.,0.)); +#37692 = ADVANCED_FACE('',(#37693),#37712,.T.); +#37693 = FACE_BOUND('',#37694,.T.); +#37694 = EDGE_LOOP('',(#37695,#37703,#37710,#37711)); +#37695 = ORIENTED_EDGE('',*,*,#37696,.T.); +#37696 = EDGE_CURVE('',#31845,#37697,#37699,.T.); +#37697 = VERTEX_POINT('',#37698); +#37698 = CARTESIAN_POINT('',(-7.65,-11.7,2.85)); +#37699 = LINE('',#37700,#37701); +#37700 = CARTESIAN_POINT('',(-7.65,-11.7,0.8)); +#37701 = VECTOR('',#37702,1.); +#37702 = DIRECTION('',(0.,0.,1.)); +#37703 = ORIENTED_EDGE('',*,*,#37704,.T.); +#37704 = EDGE_CURVE('',#37697,#37674,#37705,.T.); +#37705 = CIRCLE('',#37706,0.25); +#37706 = AXIS2_PLACEMENT_3D('',#37707,#37708,#37709); +#37707 = CARTESIAN_POINT('',(-7.65,-11.45,2.85)); +#37708 = DIRECTION('',(-0.,-0.,-1.)); +#37709 = DIRECTION('',(0.,-1.,0.)); +#37710 = ORIENTED_EDGE('',*,*,#37673,.F.); +#37711 = ORIENTED_EDGE('',*,*,#31852,.F.); +#37712 = CYLINDRICAL_SURFACE('',#37713,0.25); +#37713 = AXIS2_PLACEMENT_3D('',#37714,#37715,#37716); +#37714 = CARTESIAN_POINT('',(-7.65,-11.45,0.8)); +#37715 = DIRECTION('',(0.,0.,1.)); +#37716 = DIRECTION('',(0.,-1.,0.)); +#37717 = ADVANCED_FACE('',(#37718),#37736,.T.); +#37718 = FACE_BOUND('',#37719,.T.); +#37719 = EDGE_LOOP('',(#37720,#37721,#37729,#37735)); +#37720 = ORIENTED_EDGE('',*,*,#31844,.F.); +#37721 = ORIENTED_EDGE('',*,*,#37722,.T.); +#37722 = EDGE_CURVE('',#31836,#37723,#37725,.T.); +#37723 = VERTEX_POINT('',#37724); +#37724 = CARTESIAN_POINT('',(7.65,-11.7,2.85)); +#37725 = LINE('',#37726,#37727); +#37726 = CARTESIAN_POINT('',(7.65,-11.7,0.8)); +#37727 = VECTOR('',#37728,1.); +#37728 = DIRECTION('',(0.,0.,1.)); +#37729 = ORIENTED_EDGE('',*,*,#37730,.T.); +#37730 = EDGE_CURVE('',#37723,#37697,#37731,.T.); +#37731 = LINE('',#37732,#37733); +#37732 = CARTESIAN_POINT('',(7.9,-11.7,2.85)); +#37733 = VECTOR('',#37734,1.); +#37734 = DIRECTION('',(-1.,0.,0.)); +#37735 = ORIENTED_EDGE('',*,*,#37696,.F.); +#37736 = PLANE('',#37737); +#37737 = AXIS2_PLACEMENT_3D('',#37738,#37739,#37740); +#37738 = CARTESIAN_POINT('',(7.9,-11.7,0.8)); +#37739 = DIRECTION('',(0.,-1.,0.)); +#37740 = DIRECTION('',(-1.,0.,0.)); +#37741 = ADVANCED_FACE('',(#37742),#37761,.T.); +#37742 = FACE_BOUND('',#37743,.T.); +#37743 = EDGE_LOOP('',(#37744,#37752,#37759,#37760)); +#37744 = ORIENTED_EDGE('',*,*,#37745,.T.); +#37745 = EDGE_CURVE('',#31828,#37746,#37748,.T.); +#37746 = VERTEX_POINT('',#37747); +#37747 = CARTESIAN_POINT('',(7.9,-11.45,2.85)); +#37748 = LINE('',#37749,#37750); +#37749 = CARTESIAN_POINT('',(7.9,-11.45,0.8)); +#37750 = VECTOR('',#37751,1.); +#37751 = DIRECTION('',(0.,0.,1.)); +#37752 = ORIENTED_EDGE('',*,*,#37753,.F.); +#37753 = EDGE_CURVE('',#37723,#37746,#37754,.T.); +#37754 = CIRCLE('',#37755,0.25); +#37755 = AXIS2_PLACEMENT_3D('',#37756,#37757,#37758); +#37756 = CARTESIAN_POINT('',(7.65,-11.45,2.85)); +#37757 = DIRECTION('',(-0.,0.,1.)); +#37758 = DIRECTION('',(0.,-1.,0.)); +#37759 = ORIENTED_EDGE('',*,*,#37722,.F.); +#37760 = ORIENTED_EDGE('',*,*,#31835,.F.); +#37761 = CYLINDRICAL_SURFACE('',#37762,0.25); +#37762 = AXIS2_PLACEMENT_3D('',#37763,#37764,#37765); +#37763 = CARTESIAN_POINT('',(7.65,-11.45,0.8)); +#37764 = DIRECTION('',(0.,0.,1.)); +#37765 = DIRECTION('',(1.,0.,-0.)); +#37766 = ADVANCED_FACE('',(#37767),#37785,.T.); +#37767 = FACE_BOUND('',#37768,.T.); +#37768 = EDGE_LOOP('',(#37769,#37770,#37778,#37784)); +#37769 = ORIENTED_EDGE('',*,*,#31827,.F.); +#37770 = ORIENTED_EDGE('',*,*,#37771,.T.); +#37771 = EDGE_CURVE('',#31819,#37772,#37774,.T.); +#37772 = VERTEX_POINT('',#37773); +#37773 = CARTESIAN_POINT('',(7.9,5.65,2.85)); +#37774 = LINE('',#37775,#37776); +#37775 = CARTESIAN_POINT('',(7.9,5.65,0.8)); +#37776 = VECTOR('',#37777,1.); +#37777 = DIRECTION('',(0.,0.,1.)); +#37778 = ORIENTED_EDGE('',*,*,#37779,.T.); +#37779 = EDGE_CURVE('',#37772,#37746,#37780,.T.); +#37780 = LINE('',#37781,#37782); +#37781 = CARTESIAN_POINT('',(7.9,5.9,2.85)); +#37782 = VECTOR('',#37783,1.); +#37783 = DIRECTION('',(0.,-1.,0.)); +#37784 = ORIENTED_EDGE('',*,*,#37745,.F.); +#37785 = PLANE('',#37786); +#37786 = AXIS2_PLACEMENT_3D('',#37787,#37788,#37789); +#37787 = CARTESIAN_POINT('',(7.9,5.9,0.8)); +#37788 = DIRECTION('',(1.,0.,0.)); +#37789 = DIRECTION('',(0.,-1.,0.)); +#37790 = ADVANCED_FACE('',(#37791),#37810,.T.); +#37791 = FACE_BOUND('',#37792,.T.); +#37792 = EDGE_LOOP('',(#37793,#37801,#37808,#37809)); +#37793 = ORIENTED_EDGE('',*,*,#37794,.T.); +#37794 = EDGE_CURVE('',#31811,#37795,#37797,.T.); +#37795 = VERTEX_POINT('',#37796); +#37796 = CARTESIAN_POINT('',(7.65,5.9,2.85)); +#37797 = LINE('',#37798,#37799); +#37798 = CARTESIAN_POINT('',(7.65,5.9,0.8)); +#37799 = VECTOR('',#37800,1.); +#37800 = DIRECTION('',(0.,0.,1.)); +#37801 = ORIENTED_EDGE('',*,*,#37802,.T.); +#37802 = EDGE_CURVE('',#37795,#37772,#37803,.T.); +#37803 = CIRCLE('',#37804,0.25); +#37804 = AXIS2_PLACEMENT_3D('',#37805,#37806,#37807); +#37805 = CARTESIAN_POINT('',(7.65,5.65,2.85)); +#37806 = DIRECTION('',(0.,0.,-1.)); +#37807 = DIRECTION('',(1.,0.,0.)); +#37808 = ORIENTED_EDGE('',*,*,#37771,.F.); +#37809 = ORIENTED_EDGE('',*,*,#31818,.F.); +#37810 = CYLINDRICAL_SURFACE('',#37811,0.25); +#37811 = AXIS2_PLACEMENT_3D('',#37812,#37813,#37814); +#37812 = CARTESIAN_POINT('',(7.65,5.65,0.8)); +#37813 = DIRECTION('',(0.,0.,1.)); +#37814 = DIRECTION('',(0.,1.,0.)); +#37815 = ADVANCED_FACE('',(#37816),#37827,.T.); +#37816 = FACE_BOUND('',#37817,.T.); +#37817 = EDGE_LOOP('',(#37818,#37819,#37820,#37826)); +#37818 = ORIENTED_EDGE('',*,*,#31810,.F.); +#37819 = ORIENTED_EDGE('',*,*,#37658,.T.); +#37820 = ORIENTED_EDGE('',*,*,#37821,.T.); +#37821 = EDGE_CURVE('',#37650,#37795,#37822,.T.); +#37822 = LINE('',#37823,#37824); +#37823 = CARTESIAN_POINT('',(-7.9,5.9,2.85)); +#37824 = VECTOR('',#37825,1.); +#37825 = DIRECTION('',(1.,0.,0.)); +#37826 = ORIENTED_EDGE('',*,*,#37794,.F.); +#37827 = PLANE('',#37828); +#37828 = AXIS2_PLACEMENT_3D('',#37829,#37830,#37831); +#37829 = CARTESIAN_POINT('',(-7.9,5.9,0.8)); +#37830 = DIRECTION('',(0.,1.,0.)); +#37831 = DIRECTION('',(1.,0.,0.)); +#37832 = ADVANCED_FACE('',(#37833),#37858,.F.); +#37833 = FACE_BOUND('',#37834,.F.); +#37834 = EDGE_LOOP('',(#37835,#37843,#37851,#37857)); +#37835 = ORIENTED_EDGE('',*,*,#37836,.T.); +#37836 = EDGE_CURVE('',#31870,#37837,#37839,.T.); +#37837 = VERTEX_POINT('',#37838); +#37838 = CARTESIAN_POINT('',(7.5,6.75,1.)); +#37839 = LINE('',#37840,#37841); +#37840 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#37841 = VECTOR('',#37842,1.); +#37842 = DIRECTION('',(0.,0.,1.)); +#37843 = ORIENTED_EDGE('',*,*,#37844,.T.); +#37844 = EDGE_CURVE('',#37837,#37845,#37847,.T.); +#37845 = VERTEX_POINT('',#37846); +#37846 = CARTESIAN_POINT('',(7.5,12.25,1.)); +#37847 = LINE('',#37848,#37849); +#37848 = CARTESIAN_POINT('',(7.5,6.75,1.)); +#37849 = VECTOR('',#37850,1.); +#37850 = DIRECTION('',(0.,1.,0.)); +#37851 = ORIENTED_EDGE('',*,*,#37852,.F.); +#37852 = EDGE_CURVE('',#31872,#37845,#37853,.T.); +#37853 = LINE('',#37854,#37855); +#37854 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#37855 = VECTOR('',#37856,1.); +#37856 = DIRECTION('',(0.,0.,1.)); +#37857 = ORIENTED_EDGE('',*,*,#31869,.F.); +#37858 = PLANE('',#37859); +#37859 = AXIS2_PLACEMENT_3D('',#37860,#37861,#37862); +#37860 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#37861 = DIRECTION('',(-1.,0.,0.)); +#37862 = DIRECTION('',(0.,1.,0.)); +#37863 = ADVANCED_FACE('',(#37864),#37882,.F.); +#37864 = FACE_BOUND('',#37865,.F.); +#37865 = EDGE_LOOP('',(#37866,#37867,#37875,#37881)); +#37866 = ORIENTED_EDGE('',*,*,#37852,.T.); +#37867 = ORIENTED_EDGE('',*,*,#37868,.T.); +#37868 = EDGE_CURVE('',#37845,#37869,#37871,.T.); +#37869 = VERTEX_POINT('',#37870); +#37870 = CARTESIAN_POINT('',(2.,12.25,1.)); +#37871 = LINE('',#37872,#37873); +#37872 = CARTESIAN_POINT('',(7.5,12.25,1.)); +#37873 = VECTOR('',#37874,1.); +#37874 = DIRECTION('',(-1.,0.,0.)); +#37875 = ORIENTED_EDGE('',*,*,#37876,.F.); +#37876 = EDGE_CURVE('',#32080,#37869,#37877,.T.); +#37877 = LINE('',#37878,#37879); +#37878 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#37879 = VECTOR('',#37880,1.); +#37880 = DIRECTION('',(0.,0.,1.)); +#37881 = ORIENTED_EDGE('',*,*,#32087,.F.); +#37882 = PLANE('',#37883); +#37883 = AXIS2_PLACEMENT_3D('',#37884,#37885,#37886); +#37884 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#37885 = DIRECTION('',(0.,-1.,0.)); +#37886 = DIRECTION('',(-1.,0.,0.)); +#37887 = ADVANCED_FACE('',(#37888),#37906,.F.); +#37888 = FACE_BOUND('',#37889,.F.); +#37889 = EDGE_LOOP('',(#37890,#37891,#37899,#37905)); +#37890 = ORIENTED_EDGE('',*,*,#37876,.T.); +#37891 = ORIENTED_EDGE('',*,*,#37892,.T.); +#37892 = EDGE_CURVE('',#37869,#37893,#37895,.T.); +#37893 = VERTEX_POINT('',#37894); +#37894 = CARTESIAN_POINT('',(2.,9.75,1.)); +#37895 = LINE('',#37896,#37897); +#37896 = CARTESIAN_POINT('',(2.,12.25,1.)); +#37897 = VECTOR('',#37898,1.); +#37898 = DIRECTION('',(0.,-1.,0.)); +#37899 = ORIENTED_EDGE('',*,*,#37900,.F.); +#37900 = EDGE_CURVE('',#32072,#37893,#37901,.T.); +#37901 = LINE('',#37902,#37903); +#37902 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#37903 = VECTOR('',#37904,1.); +#37904 = DIRECTION('',(0.,0.,1.)); +#37905 = ORIENTED_EDGE('',*,*,#32079,.F.); +#37906 = PLANE('',#37907); +#37907 = AXIS2_PLACEMENT_3D('',#37908,#37909,#37910); +#37908 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#37909 = DIRECTION('',(1.,0.,0.)); +#37910 = DIRECTION('',(0.,-1.,0.)); +#37911 = ADVANCED_FACE('',(#37912),#37930,.F.); +#37912 = FACE_BOUND('',#37913,.F.); +#37913 = EDGE_LOOP('',(#37914,#37915,#37923,#37929)); +#37914 = ORIENTED_EDGE('',*,*,#37900,.T.); +#37915 = ORIENTED_EDGE('',*,*,#37916,.T.); +#37916 = EDGE_CURVE('',#37893,#37917,#37919,.T.); +#37917 = VERTEX_POINT('',#37918); +#37918 = CARTESIAN_POINT('',(0.5,9.75,1.)); +#37919 = LINE('',#37920,#37921); +#37920 = CARTESIAN_POINT('',(2.,9.75,1.)); +#37921 = VECTOR('',#37922,1.); +#37922 = DIRECTION('',(-1.,0.,0.)); +#37923 = ORIENTED_EDGE('',*,*,#37924,.F.); +#37924 = EDGE_CURVE('',#32064,#37917,#37925,.T.); +#37925 = LINE('',#37926,#37927); +#37926 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#37927 = VECTOR('',#37928,1.); +#37928 = DIRECTION('',(0.,0.,1.)); +#37929 = ORIENTED_EDGE('',*,*,#32071,.F.); +#37930 = PLANE('',#37931); +#37931 = AXIS2_PLACEMENT_3D('',#37932,#37933,#37934); +#37932 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#37933 = DIRECTION('',(0.,-1.,0.)); +#37934 = DIRECTION('',(-1.,0.,0.)); +#37935 = ADVANCED_FACE('',(#37936),#37954,.F.); +#37936 = FACE_BOUND('',#37937,.F.); +#37937 = EDGE_LOOP('',(#37938,#37939,#37947,#37953)); +#37938 = ORIENTED_EDGE('',*,*,#37924,.T.); +#37939 = ORIENTED_EDGE('',*,*,#37940,.T.); +#37940 = EDGE_CURVE('',#37917,#37941,#37943,.T.); +#37941 = VERTEX_POINT('',#37942); +#37942 = CARTESIAN_POINT('',(0.5,12.25,1.)); +#37943 = LINE('',#37944,#37945); +#37944 = CARTESIAN_POINT('',(0.5,9.75,1.)); +#37945 = VECTOR('',#37946,1.); +#37946 = DIRECTION('',(0.,1.,0.)); +#37947 = ORIENTED_EDGE('',*,*,#37948,.F.); +#37948 = EDGE_CURVE('',#32056,#37941,#37949,.T.); +#37949 = LINE('',#37950,#37951); +#37950 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#37951 = VECTOR('',#37952,1.); +#37952 = DIRECTION('',(0.,0.,1.)); +#37953 = ORIENTED_EDGE('',*,*,#32063,.F.); +#37954 = PLANE('',#37955); +#37955 = AXIS2_PLACEMENT_3D('',#37956,#37957,#37958); +#37956 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#37957 = DIRECTION('',(-1.,0.,0.)); +#37958 = DIRECTION('',(0.,1.,0.)); +#37959 = ADVANCED_FACE('',(#37960),#37978,.F.); +#37960 = FACE_BOUND('',#37961,.F.); +#37961 = EDGE_LOOP('',(#37962,#37963,#37971,#37977)); +#37962 = ORIENTED_EDGE('',*,*,#37948,.T.); +#37963 = ORIENTED_EDGE('',*,*,#37964,.T.); +#37964 = EDGE_CURVE('',#37941,#37965,#37967,.T.); +#37965 = VERTEX_POINT('',#37966); +#37966 = CARTESIAN_POINT('',(-2.75,12.25,1.)); +#37967 = LINE('',#37968,#37969); +#37968 = CARTESIAN_POINT('',(0.5,12.25,1.)); +#37969 = VECTOR('',#37970,1.); +#37970 = DIRECTION('',(-1.,0.,0.)); +#37971 = ORIENTED_EDGE('',*,*,#37972,.F.); +#37972 = EDGE_CURVE('',#32048,#37965,#37973,.T.); +#37973 = LINE('',#37974,#37975); +#37974 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#37975 = VECTOR('',#37976,1.); +#37976 = DIRECTION('',(0.,0.,1.)); +#37977 = ORIENTED_EDGE('',*,*,#32055,.F.); +#37978 = PLANE('',#37979); +#37979 = AXIS2_PLACEMENT_3D('',#37980,#37981,#37982); +#37980 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#37981 = DIRECTION('',(0.,-1.,0.)); +#37982 = DIRECTION('',(-1.,0.,0.)); +#37983 = ADVANCED_FACE('',(#37984),#38002,.F.); +#37984 = FACE_BOUND('',#37985,.F.); +#37985 = EDGE_LOOP('',(#37986,#37987,#37995,#38001)); +#37986 = ORIENTED_EDGE('',*,*,#37972,.T.); +#37987 = ORIENTED_EDGE('',*,*,#37988,.T.); +#37988 = EDGE_CURVE('',#37965,#37989,#37991,.T.); +#37989 = VERTEX_POINT('',#37990); +#37990 = CARTESIAN_POINT('',(-2.75,9.75,1.)); +#37991 = LINE('',#37992,#37993); +#37992 = CARTESIAN_POINT('',(-2.75,12.25,1.)); +#37993 = VECTOR('',#37994,1.); +#37994 = DIRECTION('',(0.,-1.,0.)); +#37995 = ORIENTED_EDGE('',*,*,#37996,.F.); +#37996 = EDGE_CURVE('',#32040,#37989,#37997,.T.); +#37997 = LINE('',#37998,#37999); +#37998 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#37999 = VECTOR('',#38000,1.); +#38000 = DIRECTION('',(0.,0.,1.)); +#38001 = ORIENTED_EDGE('',*,*,#32047,.F.); +#38002 = PLANE('',#38003); +#38003 = AXIS2_PLACEMENT_3D('',#38004,#38005,#38006); +#38004 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#38005 = DIRECTION('',(1.,0.,0.)); +#38006 = DIRECTION('',(0.,-1.,0.)); +#38007 = ADVANCED_FACE('',(#38008),#38026,.F.); +#38008 = FACE_BOUND('',#38009,.F.); +#38009 = EDGE_LOOP('',(#38010,#38011,#38019,#38025)); +#38010 = ORIENTED_EDGE('',*,*,#37996,.T.); +#38011 = ORIENTED_EDGE('',*,*,#38012,.T.); +#38012 = EDGE_CURVE('',#37989,#38013,#38015,.T.); +#38013 = VERTEX_POINT('',#38014); +#38014 = CARTESIAN_POINT('',(-4.25,9.75,1.)); +#38015 = LINE('',#38016,#38017); +#38016 = CARTESIAN_POINT('',(-2.75,9.75,1.)); +#38017 = VECTOR('',#38018,1.); +#38018 = DIRECTION('',(-1.,0.,0.)); +#38019 = ORIENTED_EDGE('',*,*,#38020,.F.); +#38020 = EDGE_CURVE('',#32032,#38013,#38021,.T.); +#38021 = LINE('',#38022,#38023); +#38022 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#38023 = VECTOR('',#38024,1.); +#38024 = DIRECTION('',(0.,0.,1.)); +#38025 = ORIENTED_EDGE('',*,*,#32039,.F.); +#38026 = PLANE('',#38027); +#38027 = AXIS2_PLACEMENT_3D('',#38028,#38029,#38030); +#38028 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#38029 = DIRECTION('',(0.,-1.,0.)); +#38030 = DIRECTION('',(-1.,0.,0.)); +#38031 = ADVANCED_FACE('',(#38032),#38050,.F.); +#38032 = FACE_BOUND('',#38033,.F.); +#38033 = EDGE_LOOP('',(#38034,#38035,#38043,#38049)); +#38034 = ORIENTED_EDGE('',*,*,#38020,.T.); +#38035 = ORIENTED_EDGE('',*,*,#38036,.T.); +#38036 = EDGE_CURVE('',#38013,#38037,#38039,.T.); +#38037 = VERTEX_POINT('',#38038); +#38038 = CARTESIAN_POINT('',(-4.25,12.25,1.)); +#38039 = LINE('',#38040,#38041); +#38040 = CARTESIAN_POINT('',(-4.25,9.75,1.)); +#38041 = VECTOR('',#38042,1.); +#38042 = DIRECTION('',(0.,1.,0.)); +#38043 = ORIENTED_EDGE('',*,*,#38044,.F.); +#38044 = EDGE_CURVE('',#32024,#38037,#38045,.T.); +#38045 = LINE('',#38046,#38047); +#38046 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#38047 = VECTOR('',#38048,1.); +#38048 = DIRECTION('',(0.,0.,1.)); +#38049 = ORIENTED_EDGE('',*,*,#32031,.F.); +#38050 = PLANE('',#38051); +#38051 = AXIS2_PLACEMENT_3D('',#38052,#38053,#38054); +#38052 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#38053 = DIRECTION('',(-1.,0.,0.)); +#38054 = DIRECTION('',(0.,1.,0.)); +#38055 = ADVANCED_FACE('',(#38056),#38074,.F.); +#38056 = FACE_BOUND('',#38057,.F.); +#38057 = EDGE_LOOP('',(#38058,#38059,#38067,#38073)); +#38058 = ORIENTED_EDGE('',*,*,#38044,.T.); +#38059 = ORIENTED_EDGE('',*,*,#38060,.T.); +#38060 = EDGE_CURVE('',#38037,#38061,#38063,.T.); +#38061 = VERTEX_POINT('',#38062); +#38062 = CARTESIAN_POINT('',(-7.5,12.25,1.)); +#38063 = LINE('',#38064,#38065); +#38064 = CARTESIAN_POINT('',(-4.25,12.25,1.)); +#38065 = VECTOR('',#38066,1.); +#38066 = DIRECTION('',(-1.,0.,0.)); +#38067 = ORIENTED_EDGE('',*,*,#38068,.F.); +#38068 = EDGE_CURVE('',#32016,#38061,#38069,.T.); +#38069 = LINE('',#38070,#38071); +#38070 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#38071 = VECTOR('',#38072,1.); +#38072 = DIRECTION('',(0.,0.,1.)); +#38073 = ORIENTED_EDGE('',*,*,#32023,.F.); +#38074 = PLANE('',#38075); +#38075 = AXIS2_PLACEMENT_3D('',#38076,#38077,#38078); +#38076 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#38077 = DIRECTION('',(0.,-1.,0.)); +#38078 = DIRECTION('',(-1.,0.,0.)); +#38079 = ADVANCED_FACE('',(#38080),#38098,.F.); +#38080 = FACE_BOUND('',#38081,.F.); +#38081 = EDGE_LOOP('',(#38082,#38083,#38091,#38097)); +#38082 = ORIENTED_EDGE('',*,*,#38068,.T.); +#38083 = ORIENTED_EDGE('',*,*,#38084,.T.); +#38084 = EDGE_CURVE('',#38061,#38085,#38087,.T.); +#38085 = VERTEX_POINT('',#38086); +#38086 = CARTESIAN_POINT('',(-7.5,7.75,1.)); +#38087 = LINE('',#38088,#38089); +#38088 = CARTESIAN_POINT('',(-7.5,12.25,1.)); +#38089 = VECTOR('',#38090,1.); +#38090 = DIRECTION('',(0.,-1.,0.)); +#38091 = ORIENTED_EDGE('',*,*,#38092,.F.); +#38092 = EDGE_CURVE('',#32008,#38085,#38093,.T.); +#38093 = LINE('',#38094,#38095); +#38094 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#38095 = VECTOR('',#38096,1.); +#38096 = DIRECTION('',(0.,0.,1.)); +#38097 = ORIENTED_EDGE('',*,*,#32015,.F.); +#38098 = PLANE('',#38099); +#38099 = AXIS2_PLACEMENT_3D('',#38100,#38101,#38102); +#38100 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#38101 = DIRECTION('',(1.,0.,0.)); +#38102 = DIRECTION('',(0.,-1.,0.)); +#38103 = ADVANCED_FACE('',(#38104),#38122,.F.); +#38104 = FACE_BOUND('',#38105,.F.); +#38105 = EDGE_LOOP('',(#38106,#38107,#38115,#38121)); +#38106 = ORIENTED_EDGE('',*,*,#38092,.T.); +#38107 = ORIENTED_EDGE('',*,*,#38108,.T.); +#38108 = EDGE_CURVE('',#38085,#38109,#38111,.T.); +#38109 = VERTEX_POINT('',#38110); +#38110 = CARTESIAN_POINT('',(-6.5,7.75,1.)); +#38111 = LINE('',#38112,#38113); +#38112 = CARTESIAN_POINT('',(-7.5,7.75,1.)); +#38113 = VECTOR('',#38114,1.); +#38114 = DIRECTION('',(1.,0.,0.)); +#38115 = ORIENTED_EDGE('',*,*,#38116,.F.); +#38116 = EDGE_CURVE('',#32000,#38109,#38117,.T.); +#38117 = LINE('',#38118,#38119); +#38118 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#38119 = VECTOR('',#38120,1.); +#38120 = DIRECTION('',(0.,0.,1.)); +#38121 = ORIENTED_EDGE('',*,*,#32007,.F.); +#38122 = PLANE('',#38123); +#38123 = AXIS2_PLACEMENT_3D('',#38124,#38125,#38126); +#38124 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#38125 = DIRECTION('',(0.,1.,0.)); +#38126 = DIRECTION('',(1.,0.,0.)); +#38127 = ADVANCED_FACE('',(#38128),#38146,.F.); +#38128 = FACE_BOUND('',#38129,.F.); +#38129 = EDGE_LOOP('',(#38130,#38131,#38139,#38145)); +#38130 = ORIENTED_EDGE('',*,*,#38116,.T.); +#38131 = ORIENTED_EDGE('',*,*,#38132,.T.); +#38132 = EDGE_CURVE('',#38109,#38133,#38135,.T.); +#38133 = VERTEX_POINT('',#38134); +#38134 = CARTESIAN_POINT('',(-6.5,11.25,1.)); +#38135 = LINE('',#38136,#38137); +#38136 = CARTESIAN_POINT('',(-6.5,7.75,1.)); +#38137 = VECTOR('',#38138,1.); +#38138 = DIRECTION('',(0.,1.,0.)); +#38139 = ORIENTED_EDGE('',*,*,#38140,.F.); +#38140 = EDGE_CURVE('',#31992,#38133,#38141,.T.); +#38141 = LINE('',#38142,#38143); +#38142 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#38143 = VECTOR('',#38144,1.); +#38144 = DIRECTION('',(0.,0.,1.)); +#38145 = ORIENTED_EDGE('',*,*,#31999,.F.); +#38146 = PLANE('',#38147); +#38147 = AXIS2_PLACEMENT_3D('',#38148,#38149,#38150); +#38148 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#38149 = DIRECTION('',(-1.,0.,0.)); +#38150 = DIRECTION('',(0.,1.,0.)); +#38151 = ADVANCED_FACE('',(#38152),#38170,.F.); +#38152 = FACE_BOUND('',#38153,.F.); +#38153 = EDGE_LOOP('',(#38154,#38155,#38163,#38169)); +#38154 = ORIENTED_EDGE('',*,*,#38140,.T.); +#38155 = ORIENTED_EDGE('',*,*,#38156,.T.); +#38156 = EDGE_CURVE('',#38133,#38157,#38159,.T.); +#38157 = VERTEX_POINT('',#38158); +#38158 = CARTESIAN_POINT('',(-5.25,11.25,1.)); +#38159 = LINE('',#38160,#38161); +#38160 = CARTESIAN_POINT('',(-6.5,11.25,1.)); +#38161 = VECTOR('',#38162,1.); +#38162 = DIRECTION('',(1.,0.,0.)); +#38163 = ORIENTED_EDGE('',*,*,#38164,.F.); +#38164 = EDGE_CURVE('',#31984,#38157,#38165,.T.); +#38165 = LINE('',#38166,#38167); +#38166 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#38167 = VECTOR('',#38168,1.); +#38168 = DIRECTION('',(0.,0.,1.)); +#38169 = ORIENTED_EDGE('',*,*,#31991,.F.); +#38170 = PLANE('',#38171); +#38171 = AXIS2_PLACEMENT_3D('',#38172,#38173,#38174); +#38172 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#38173 = DIRECTION('',(0.,1.,0.)); +#38174 = DIRECTION('',(1.,0.,0.)); +#38175 = ADVANCED_FACE('',(#38176),#38194,.F.); +#38176 = FACE_BOUND('',#38177,.F.); +#38177 = EDGE_LOOP('',(#38178,#38179,#38187,#38193)); +#38178 = ORIENTED_EDGE('',*,*,#38164,.T.); +#38179 = ORIENTED_EDGE('',*,*,#38180,.T.); +#38180 = EDGE_CURVE('',#38157,#38181,#38183,.T.); +#38181 = VERTEX_POINT('',#38182); +#38182 = CARTESIAN_POINT('',(-5.25,8.75,1.)); +#38183 = LINE('',#38184,#38185); +#38184 = CARTESIAN_POINT('',(-5.25,11.25,1.)); +#38185 = VECTOR('',#38186,1.); +#38186 = DIRECTION('',(0.,-1.,0.)); +#38187 = ORIENTED_EDGE('',*,*,#38188,.F.); +#38188 = EDGE_CURVE('',#31976,#38181,#38189,.T.); +#38189 = LINE('',#38190,#38191); +#38190 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#38191 = VECTOR('',#38192,1.); +#38192 = DIRECTION('',(0.,0.,1.)); +#38193 = ORIENTED_EDGE('',*,*,#31983,.F.); +#38194 = PLANE('',#38195); +#38195 = AXIS2_PLACEMENT_3D('',#38196,#38197,#38198); +#38196 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#38197 = DIRECTION('',(1.,0.,0.)); +#38198 = DIRECTION('',(0.,-1.,0.)); +#38199 = ADVANCED_FACE('',(#38200),#38218,.F.); +#38200 = FACE_BOUND('',#38201,.F.); +#38201 = EDGE_LOOP('',(#38202,#38203,#38211,#38217)); +#38202 = ORIENTED_EDGE('',*,*,#38188,.T.); +#38203 = ORIENTED_EDGE('',*,*,#38204,.T.); +#38204 = EDGE_CURVE('',#38181,#38205,#38207,.T.); +#38205 = VERTEX_POINT('',#38206); +#38206 = CARTESIAN_POINT('',(-1.75,8.75,1.)); +#38207 = LINE('',#38208,#38209); +#38208 = CARTESIAN_POINT('',(-5.25,8.75,1.)); +#38209 = VECTOR('',#38210,1.); +#38210 = DIRECTION('',(1.,0.,0.)); +#38211 = ORIENTED_EDGE('',*,*,#38212,.F.); +#38212 = EDGE_CURVE('',#31968,#38205,#38213,.T.); +#38213 = LINE('',#38214,#38215); +#38214 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#38215 = VECTOR('',#38216,1.); +#38216 = DIRECTION('',(0.,0.,1.)); +#38217 = ORIENTED_EDGE('',*,*,#31975,.F.); +#38218 = PLANE('',#38219); +#38219 = AXIS2_PLACEMENT_3D('',#38220,#38221,#38222); +#38220 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#38221 = DIRECTION('',(0.,1.,0.)); +#38222 = DIRECTION('',(1.,0.,0.)); +#38223 = ADVANCED_FACE('',(#38224),#38242,.F.); +#38224 = FACE_BOUND('',#38225,.F.); +#38225 = EDGE_LOOP('',(#38226,#38227,#38235,#38241)); +#38226 = ORIENTED_EDGE('',*,*,#38212,.T.); +#38227 = ORIENTED_EDGE('',*,*,#38228,.T.); +#38228 = EDGE_CURVE('',#38205,#38229,#38231,.T.); +#38229 = VERTEX_POINT('',#38230); +#38230 = CARTESIAN_POINT('',(-1.75,11.25,1.)); +#38231 = LINE('',#38232,#38233); +#38232 = CARTESIAN_POINT('',(-1.75,8.75,1.)); +#38233 = VECTOR('',#38234,1.); +#38234 = DIRECTION('',(0.,1.,0.)); +#38235 = ORIENTED_EDGE('',*,*,#38236,.F.); +#38236 = EDGE_CURVE('',#31960,#38229,#38237,.T.); +#38237 = LINE('',#38238,#38239); +#38238 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#38239 = VECTOR('',#38240,1.); +#38240 = DIRECTION('',(0.,0.,1.)); +#38241 = ORIENTED_EDGE('',*,*,#31967,.F.); +#38242 = PLANE('',#38243); +#38243 = AXIS2_PLACEMENT_3D('',#38244,#38245,#38246); +#38244 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#38245 = DIRECTION('',(-1.,0.,0.)); +#38246 = DIRECTION('',(0.,1.,0.)); +#38247 = ADVANCED_FACE('',(#38248),#38266,.F.); +#38248 = FACE_BOUND('',#38249,.F.); +#38249 = EDGE_LOOP('',(#38250,#38251,#38259,#38265)); +#38250 = ORIENTED_EDGE('',*,*,#38236,.T.); +#38251 = ORIENTED_EDGE('',*,*,#38252,.T.); +#38252 = EDGE_CURVE('',#38229,#38253,#38255,.T.); +#38253 = VERTEX_POINT('',#38254); +#38254 = CARTESIAN_POINT('',(-0.5,11.25,1.)); +#38255 = LINE('',#38256,#38257); +#38256 = CARTESIAN_POINT('',(-1.75,11.25,1.)); +#38257 = VECTOR('',#38258,1.); +#38258 = DIRECTION('',(1.,0.,0.)); +#38259 = ORIENTED_EDGE('',*,*,#38260,.F.); +#38260 = EDGE_CURVE('',#31952,#38253,#38261,.T.); +#38261 = LINE('',#38262,#38263); +#38262 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#38263 = VECTOR('',#38264,1.); +#38264 = DIRECTION('',(0.,0.,1.)); +#38265 = ORIENTED_EDGE('',*,*,#31959,.F.); +#38266 = PLANE('',#38267); +#38267 = AXIS2_PLACEMENT_3D('',#38268,#38269,#38270); +#38268 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#38269 = DIRECTION('',(0.,1.,0.)); +#38270 = DIRECTION('',(1.,0.,0.)); +#38271 = ADVANCED_FACE('',(#38272),#38290,.F.); +#38272 = FACE_BOUND('',#38273,.F.); +#38273 = EDGE_LOOP('',(#38274,#38275,#38283,#38289)); +#38274 = ORIENTED_EDGE('',*,*,#38260,.T.); +#38275 = ORIENTED_EDGE('',*,*,#38276,.T.); +#38276 = EDGE_CURVE('',#38253,#38277,#38279,.T.); +#38277 = VERTEX_POINT('',#38278); +#38278 = CARTESIAN_POINT('',(-0.5,8.75,1.)); +#38279 = LINE('',#38280,#38281); +#38280 = CARTESIAN_POINT('',(-0.5,11.25,1.)); +#38281 = VECTOR('',#38282,1.); +#38282 = DIRECTION('',(0.,-1.,0.)); +#38283 = ORIENTED_EDGE('',*,*,#38284,.F.); +#38284 = EDGE_CURVE('',#31944,#38277,#38285,.T.); +#38285 = LINE('',#38286,#38287); +#38286 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#38287 = VECTOR('',#38288,1.); +#38288 = DIRECTION('',(0.,0.,1.)); +#38289 = ORIENTED_EDGE('',*,*,#31951,.F.); +#38290 = PLANE('',#38291); +#38291 = AXIS2_PLACEMENT_3D('',#38292,#38293,#38294); +#38292 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#38293 = DIRECTION('',(1.,0.,0.)); +#38294 = DIRECTION('',(0.,-1.,0.)); +#38295 = ADVANCED_FACE('',(#38296),#38314,.F.); +#38296 = FACE_BOUND('',#38297,.F.); +#38297 = EDGE_LOOP('',(#38298,#38299,#38307,#38313)); +#38298 = ORIENTED_EDGE('',*,*,#38284,.T.); +#38299 = ORIENTED_EDGE('',*,*,#38300,.T.); +#38300 = EDGE_CURVE('',#38277,#38301,#38303,.T.); +#38301 = VERTEX_POINT('',#38302); +#38302 = CARTESIAN_POINT('',(3.,8.75,1.)); +#38303 = LINE('',#38304,#38305); +#38304 = CARTESIAN_POINT('',(-0.5,8.75,1.)); +#38305 = VECTOR('',#38306,1.); +#38306 = DIRECTION('',(1.,0.,0.)); +#38307 = ORIENTED_EDGE('',*,*,#38308,.F.); +#38308 = EDGE_CURVE('',#31936,#38301,#38309,.T.); +#38309 = LINE('',#38310,#38311); +#38310 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#38311 = VECTOR('',#38312,1.); +#38312 = DIRECTION('',(0.,0.,1.)); +#38313 = ORIENTED_EDGE('',*,*,#31943,.F.); +#38314 = PLANE('',#38315); +#38315 = AXIS2_PLACEMENT_3D('',#38316,#38317,#38318); +#38316 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#38317 = DIRECTION('',(0.,1.,0.)); +#38318 = DIRECTION('',(1.,0.,0.)); +#38319 = ADVANCED_FACE('',(#38320),#38338,.F.); +#38320 = FACE_BOUND('',#38321,.F.); +#38321 = EDGE_LOOP('',(#38322,#38323,#38331,#38337)); +#38322 = ORIENTED_EDGE('',*,*,#38308,.T.); +#38323 = ORIENTED_EDGE('',*,*,#38324,.T.); +#38324 = EDGE_CURVE('',#38301,#38325,#38327,.T.); +#38325 = VERTEX_POINT('',#38326); +#38326 = CARTESIAN_POINT('',(3.,11.25,1.)); +#38327 = LINE('',#38328,#38329); +#38328 = CARTESIAN_POINT('',(3.,8.75,1.)); +#38329 = VECTOR('',#38330,1.); +#38330 = DIRECTION('',(0.,1.,0.)); +#38331 = ORIENTED_EDGE('',*,*,#38332,.F.); +#38332 = EDGE_CURVE('',#31928,#38325,#38333,.T.); +#38333 = LINE('',#38334,#38335); +#38334 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#38335 = VECTOR('',#38336,1.); +#38336 = DIRECTION('',(0.,0.,1.)); +#38337 = ORIENTED_EDGE('',*,*,#31935,.F.); +#38338 = PLANE('',#38339); +#38339 = AXIS2_PLACEMENT_3D('',#38340,#38341,#38342); +#38340 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#38341 = DIRECTION('',(-1.,0.,0.)); +#38342 = DIRECTION('',(0.,1.,0.)); +#38343 = ADVANCED_FACE('',(#38344),#38362,.F.); +#38344 = FACE_BOUND('',#38345,.F.); +#38345 = EDGE_LOOP('',(#38346,#38347,#38355,#38361)); +#38346 = ORIENTED_EDGE('',*,*,#38332,.T.); +#38347 = ORIENTED_EDGE('',*,*,#38348,.T.); +#38348 = EDGE_CURVE('',#38325,#38349,#38351,.T.); +#38349 = VERTEX_POINT('',#38350); +#38350 = CARTESIAN_POINT('',(4.25,11.25,1.)); +#38351 = LINE('',#38352,#38353); +#38352 = CARTESIAN_POINT('',(3.,11.25,1.)); +#38353 = VECTOR('',#38354,1.); +#38354 = DIRECTION('',(1.,0.,0.)); +#38355 = ORIENTED_EDGE('',*,*,#38356,.F.); +#38356 = EDGE_CURVE('',#31920,#38349,#38357,.T.); +#38357 = LINE('',#38358,#38359); +#38358 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#38359 = VECTOR('',#38360,1.); +#38360 = DIRECTION('',(0.,0.,1.)); +#38361 = ORIENTED_EDGE('',*,*,#31927,.F.); +#38362 = PLANE('',#38363); +#38363 = AXIS2_PLACEMENT_3D('',#38364,#38365,#38366); +#38364 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#38365 = DIRECTION('',(0.,1.,0.)); +#38366 = DIRECTION('',(1.,0.,0.)); +#38367 = ADVANCED_FACE('',(#38368),#38386,.F.); +#38368 = FACE_BOUND('',#38369,.F.); +#38369 = EDGE_LOOP('',(#38370,#38371,#38379,#38385)); +#38370 = ORIENTED_EDGE('',*,*,#38356,.T.); +#38371 = ORIENTED_EDGE('',*,*,#38372,.T.); +#38372 = EDGE_CURVE('',#38349,#38373,#38375,.T.); +#38373 = VERTEX_POINT('',#38374); +#38374 = CARTESIAN_POINT('',(4.25,6.75,1.)); +#38375 = LINE('',#38376,#38377); +#38376 = CARTESIAN_POINT('',(4.25,11.25,1.)); +#38377 = VECTOR('',#38378,1.); +#38378 = DIRECTION('',(0.,-1.,0.)); +#38379 = ORIENTED_EDGE('',*,*,#38380,.F.); +#38380 = EDGE_CURVE('',#31912,#38373,#38381,.T.); +#38381 = LINE('',#38382,#38383); +#38382 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#38383 = VECTOR('',#38384,1.); +#38384 = DIRECTION('',(0.,0.,1.)); +#38385 = ORIENTED_EDGE('',*,*,#31919,.F.); +#38386 = PLANE('',#38387); +#38387 = AXIS2_PLACEMENT_3D('',#38388,#38389,#38390); +#38388 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#38389 = DIRECTION('',(1.,0.,0.)); +#38390 = DIRECTION('',(0.,-1.,0.)); +#38391 = ADVANCED_FACE('',(#38392),#38410,.F.); +#38392 = FACE_BOUND('',#38393,.F.); +#38393 = EDGE_LOOP('',(#38394,#38395,#38403,#38409)); +#38394 = ORIENTED_EDGE('',*,*,#38380,.T.); +#38395 = ORIENTED_EDGE('',*,*,#38396,.T.); +#38396 = EDGE_CURVE('',#38373,#38397,#38399,.T.); +#38397 = VERTEX_POINT('',#38398); +#38398 = CARTESIAN_POINT('',(5.25,6.75,1.)); +#38399 = LINE('',#38400,#38401); +#38400 = CARTESIAN_POINT('',(4.25,6.75,1.)); +#38401 = VECTOR('',#38402,1.); +#38402 = DIRECTION('',(1.,0.,0.)); +#38403 = ORIENTED_EDGE('',*,*,#38404,.F.); +#38404 = EDGE_CURVE('',#31904,#38397,#38405,.T.); +#38405 = LINE('',#38406,#38407); +#38406 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#38407 = VECTOR('',#38408,1.); +#38408 = DIRECTION('',(0.,0.,1.)); +#38409 = ORIENTED_EDGE('',*,*,#31911,.F.); +#38410 = PLANE('',#38411); +#38411 = AXIS2_PLACEMENT_3D('',#38412,#38413,#38414); +#38412 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#38413 = DIRECTION('',(0.,1.,0.)); +#38414 = DIRECTION('',(1.,0.,0.)); +#38415 = ADVANCED_FACE('',(#38416),#38434,.F.); +#38416 = FACE_BOUND('',#38417,.F.); +#38417 = EDGE_LOOP('',(#38418,#38419,#38427,#38433)); +#38418 = ORIENTED_EDGE('',*,*,#38404,.T.); +#38419 = ORIENTED_EDGE('',*,*,#38420,.T.); +#38420 = EDGE_CURVE('',#38397,#38421,#38423,.T.); +#38421 = VERTEX_POINT('',#38422); +#38422 = CARTESIAN_POINT('',(5.25,11.25,1.)); +#38423 = LINE('',#38424,#38425); +#38424 = CARTESIAN_POINT('',(5.25,6.75,1.)); +#38425 = VECTOR('',#38426,1.); +#38426 = DIRECTION('',(0.,1.,0.)); +#38427 = ORIENTED_EDGE('',*,*,#38428,.F.); +#38428 = EDGE_CURVE('',#31896,#38421,#38429,.T.); +#38429 = LINE('',#38430,#38431); +#38430 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#38431 = VECTOR('',#38432,1.); +#38432 = DIRECTION('',(0.,0.,1.)); +#38433 = ORIENTED_EDGE('',*,*,#31903,.F.); +#38434 = PLANE('',#38435); +#38435 = AXIS2_PLACEMENT_3D('',#38436,#38437,#38438); +#38436 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#38437 = DIRECTION('',(-1.,0.,0.)); +#38438 = DIRECTION('',(0.,1.,0.)); +#38439 = ADVANCED_FACE('',(#38440),#38458,.F.); +#38440 = FACE_BOUND('',#38441,.F.); +#38441 = EDGE_LOOP('',(#38442,#38443,#38451,#38457)); +#38442 = ORIENTED_EDGE('',*,*,#38428,.T.); +#38443 = ORIENTED_EDGE('',*,*,#38444,.T.); +#38444 = EDGE_CURVE('',#38421,#38445,#38447,.T.); +#38445 = VERTEX_POINT('',#38446); +#38446 = CARTESIAN_POINT('',(6.5,11.25,1.)); +#38447 = LINE('',#38448,#38449); +#38448 = CARTESIAN_POINT('',(5.25,11.25,1.)); +#38449 = VECTOR('',#38450,1.); +#38450 = DIRECTION('',(1.,0.,0.)); +#38451 = ORIENTED_EDGE('',*,*,#38452,.F.); +#38452 = EDGE_CURVE('',#31888,#38445,#38453,.T.); +#38453 = LINE('',#38454,#38455); +#38454 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#38455 = VECTOR('',#38456,1.); +#38456 = DIRECTION('',(0.,0.,1.)); +#38457 = ORIENTED_EDGE('',*,*,#31895,.F.); +#38458 = PLANE('',#38459); +#38459 = AXIS2_PLACEMENT_3D('',#38460,#38461,#38462); +#38460 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#38461 = DIRECTION('',(0.,1.,0.)); +#38462 = DIRECTION('',(1.,0.,0.)); +#38463 = ADVANCED_FACE('',(#38464),#38482,.F.); +#38464 = FACE_BOUND('',#38465,.F.); +#38465 = EDGE_LOOP('',(#38466,#38467,#38475,#38481)); +#38466 = ORIENTED_EDGE('',*,*,#38452,.T.); +#38467 = ORIENTED_EDGE('',*,*,#38468,.T.); +#38468 = EDGE_CURVE('',#38445,#38469,#38471,.T.); +#38469 = VERTEX_POINT('',#38470); +#38470 = CARTESIAN_POINT('',(6.5,6.75,1.)); +#38471 = LINE('',#38472,#38473); +#38472 = CARTESIAN_POINT('',(6.5,11.25,1.)); +#38473 = VECTOR('',#38474,1.); +#38474 = DIRECTION('',(0.,-1.,0.)); +#38475 = ORIENTED_EDGE('',*,*,#38476,.F.); +#38476 = EDGE_CURVE('',#31880,#38469,#38477,.T.); +#38477 = LINE('',#38478,#38479); +#38478 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#38479 = VECTOR('',#38480,1.); +#38480 = DIRECTION('',(0.,0.,1.)); +#38481 = ORIENTED_EDGE('',*,*,#31887,.F.); +#38482 = PLANE('',#38483); +#38483 = AXIS2_PLACEMENT_3D('',#38484,#38485,#38486); +#38484 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#38485 = DIRECTION('',(1.,0.,0.)); +#38486 = DIRECTION('',(0.,-1.,0.)); +#38487 = ADVANCED_FACE('',(#38488),#38499,.F.); +#38488 = FACE_BOUND('',#38489,.F.); +#38489 = EDGE_LOOP('',(#38490,#38491,#38497,#38498)); +#38490 = ORIENTED_EDGE('',*,*,#38476,.T.); +#38491 = ORIENTED_EDGE('',*,*,#38492,.T.); +#38492 = EDGE_CURVE('',#38469,#37837,#38493,.T.); +#38493 = LINE('',#38494,#38495); +#38494 = CARTESIAN_POINT('',(6.5,6.75,1.)); +#38495 = VECTOR('',#38496,1.); +#38496 = DIRECTION('',(1.,0.,0.)); +#38497 = ORIENTED_EDGE('',*,*,#37836,.F.); +#38498 = ORIENTED_EDGE('',*,*,#31879,.F.); +#38499 = PLANE('',#38500); +#38500 = AXIS2_PLACEMENT_3D('',#38501,#38502,#38503); +#38501 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#38502 = DIRECTION('',(0.,1.,0.)); +#38503 = DIRECTION('',(1.,0.,0.)); +#38504 = ADVANCED_FACE('',(#38505),#38516,.F.); +#38505 = FACE_BOUND('',#38506,.F.); +#38506 = EDGE_LOOP('',(#38507,#38508,#38509,#38510)); +#38507 = ORIENTED_EDGE('',*,*,#32197,.T.); +#38508 = ORIENTED_EDGE('',*,*,#32111,.T.); +#38509 = ORIENTED_EDGE('',*,*,#35945,.F.); +#38510 = ORIENTED_EDGE('',*,*,#38511,.F.); +#38511 = EDGE_CURVE('',#32198,#35946,#38512,.T.); +#38512 = LINE('',#38513,#38514); +#38513 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#38514 = VECTOR('',#38515,1.); +#38515 = DIRECTION('',(0.,0.,1.)); +#38516 = CYLINDRICAL_SURFACE('',#38517,0.275); +#38517 = AXIS2_PLACEMENT_3D('',#38518,#38519,#38520); +#38518 = CARTESIAN_POINT('',(-9.,5.26,0.)); +#38519 = DIRECTION('',(-0.,-0.,-1.)); +#38520 = DIRECTION('',(1.,0.,0.)); +#38521 = ADVANCED_FACE('',(#38522),#38549,.F.); +#38522 = FACE_BOUND('',#38523,.F.); +#38523 = EDGE_LOOP('',(#38524,#38534,#38541,#38542)); +#38524 = ORIENTED_EDGE('',*,*,#38525,.T.); +#38525 = EDGE_CURVE('',#38526,#38528,#38530,.T.); +#38526 = VERTEX_POINT('',#38527); +#38527 = CARTESIAN_POINT('',(9.000000023842,4.985,-2.145767343E-06)); +#38528 = VERTEX_POINT('',#38529); +#38529 = CARTESIAN_POINT('',(9.000000214576,4.985,0.799997854233)); +#38530 = LINE('',#38531,#38532); +#38531 = CARTESIAN_POINT('',(9.000000023842,4.985,-2.14576734264E-06)); +#38532 = VECTOR('',#38533,1.); +#38533 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38534 = ORIENTED_EDGE('',*,*,#38535,.T.); +#38535 = EDGE_CURVE('',#38528,#32144,#38536,.T.); +#38536 = CIRCLE('',#38537,0.275); +#38537 = AXIS2_PLACEMENT_3D('',#38538,#38539,#38540); +#38538 = CARTESIAN_POINT('',(9.000000214576,5.26,0.799997854233)); +#38539 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#38540 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38541 = ORIENTED_EDGE('',*,*,#32143,.F.); +#38542 = ORIENTED_EDGE('',*,*,#38543,.F.); +#38543 = EDGE_CURVE('',#38526,#32136,#38544,.T.); +#38544 = CIRCLE('',#38545,0.275); +#38545 = AXIS2_PLACEMENT_3D('',#38546,#38547,#38548); +#38546 = CARTESIAN_POINT('',(9.000000023842,5.26,-2.14576734264E-06)); +#38547 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#38548 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38549 = CYLINDRICAL_SURFACE('',#38550,0.275); +#38550 = AXIS2_PLACEMENT_3D('',#38551,#38552,#38553); +#38551 = CARTESIAN_POINT('',(9.000000023842,5.26,-2.14576734264E-06)); +#38552 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#38553 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38554 = ADVANCED_FACE('',(#38555),#38568,.F.); +#38555 = FACE_BOUND('',#38556,.F.); +#38556 = EDGE_LOOP('',(#38557,#38558,#38559,#38560,#38561,#38562)); +#38557 = ORIENTED_EDGE('',*,*,#38543,.T.); +#38558 = ORIENTED_EDGE('',*,*,#32133,.F.); +#38559 = ORIENTED_EDGE('',*,*,#32226,.T.); +#38560 = ORIENTED_EDGE('',*,*,#32251,.T.); +#38561 = ORIENTED_EDGE('',*,*,#32275,.T.); +#38562 = ORIENTED_EDGE('',*,*,#38563,.F.); +#38563 = EDGE_CURVE('',#38526,#32276,#38564,.T.); +#38564 = LINE('',#38565,#38566); +#38565 = CARTESIAN_POINT('',(9.000000023842,4.985,-2.14576734264E-06)); +#38566 = VECTOR('',#38567,1.); +#38567 = DIRECTION('',(0.,-1.,0.)); +#38568 = PLANE('',#38569); +#38569 = AXIS2_PLACEMENT_3D('',#38570,#38571,#38572); +#38570 = CARTESIAN_POINT('',(8.571261919915,5.26,-2.04354820701E-06)); +#38571 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38572 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38573 = ADVANCED_FACE('',(#38574),#38587,.T.); +#38574 = FACE_BOUND('',#38575,.F.); +#38575 = EDGE_LOOP('',(#38576,#38577,#38583,#38584,#38585,#38586)); +#38576 = ORIENTED_EDGE('',*,*,#38535,.F.); +#38577 = ORIENTED_EDGE('',*,*,#38578,.T.); +#38578 = EDGE_CURVE('',#38528,#32348,#38579,.T.); +#38579 = LINE('',#38580,#38581); +#38580 = CARTESIAN_POINT('',(9.000000214576,4.985,0.799997854233)); +#38581 = VECTOR('',#38582,1.); +#38582 = DIRECTION('',(0.,-1.,0.)); +#38583 = ORIENTED_EDGE('',*,*,#35998,.F.); +#38584 = ORIENTED_EDGE('',*,*,#35974,.F.); +#38585 = ORIENTED_EDGE('',*,*,#32175,.F.); +#38586 = ORIENTED_EDGE('',*,*,#32151,.T.); +#38587 = PLANE('',#38588); +#38588 = AXIS2_PLACEMENT_3D('',#38589,#38590,#38591); +#38589 = CARTESIAN_POINT('',(8.57126211065,5.26,0.799997956452)); +#38590 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38591 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38592 = ADVANCED_FACE('',(#38593),#38600,.F.); +#38593 = FACE_BOUND('',#38594,.F.); +#38594 = EDGE_LOOP('',(#38595,#38596,#38597,#38598,#38599)); +#38595 = ORIENTED_EDGE('',*,*,#38511,.T.); +#38596 = ORIENTED_EDGE('',*,*,#35954,.T.); +#38597 = ORIENTED_EDGE('',*,*,#32316,.T.); +#38598 = ORIENTED_EDGE('',*,*,#32324,.T.); +#38599 = ORIENTED_EDGE('',*,*,#32212,.F.); +#38600 = PLANE('',#38601); +#38601 = AXIS2_PLACEMENT_3D('',#38602,#38603,#38604); +#38602 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#38603 = DIRECTION('',(1.,0.,0.)); +#38604 = DIRECTION('',(0.,-1.,0.)); +#38605 = ADVANCED_FACE('',(#38606),#38614,.F.); +#38606 = FACE_BOUND('',#38607,.F.); +#38607 = EDGE_LOOP('',(#38608,#38609,#38610,#38611,#38612,#38613)); +#38608 = ORIENTED_EDGE('',*,*,#38563,.T.); +#38609 = ORIENTED_EDGE('',*,*,#32286,.T.); +#38610 = ORIENTED_EDGE('',*,*,#32339,.F.); +#38611 = ORIENTED_EDGE('',*,*,#32347,.F.); +#38612 = ORIENTED_EDGE('',*,*,#38578,.F.); +#38613 = ORIENTED_EDGE('',*,*,#38525,.F.); +#38614 = PLANE('',#38615); +#38615 = AXIS2_PLACEMENT_3D('',#38616,#38617,#38618); +#38616 = CARTESIAN_POINT('',(9.000000023842,4.985,-2.14576734264E-06)); +#38617 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38618 = DIRECTION('',(0.,1.,0.)); +#38619 = ADVANCED_FACE('',(#38620),#38632,.F.); +#38620 = FACE_BOUND('',#38621,.F.); +#38621 = EDGE_LOOP('',(#38622,#38623,#38624,#38625,#38631)); +#38622 = ORIENTED_EDGE('',*,*,#32301,.F.); +#38623 = ORIENTED_EDGE('',*,*,#32309,.F.); +#38624 = ORIENTED_EDGE('',*,*,#36033,.T.); +#38625 = ORIENTED_EDGE('',*,*,#38626,.F.); +#38626 = EDGE_CURVE('',#32395,#36016,#38627,.T.); +#38627 = LINE('',#38628,#38629); +#38628 = CARTESIAN_POINT('',(-9.,4.265,0.)); +#38629 = VECTOR('',#38630,1.); +#38630 = DIRECTION('',(0.,0.,1.)); +#38631 = ORIENTED_EDGE('',*,*,#32403,.F.); +#38632 = PLANE('',#38633); +#38633 = AXIS2_PLACEMENT_3D('',#38634,#38635,#38636); +#38634 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#38635 = DIRECTION('',(1.,0.,0.)); +#38636 = DIRECTION('',(0.,-1.,0.)); +#38637 = ADVANCED_FACE('',(#38638),#38665,.F.); +#38638 = FACE_BOUND('',#38639,.F.); +#38639 = EDGE_LOOP('',(#38640,#38648,#38656,#38662,#38663,#38664)); +#38640 = ORIENTED_EDGE('',*,*,#38641,.T.); +#38641 = EDGE_CURVE('',#32429,#38642,#38644,.T.); +#38642 = VERTEX_POINT('',#38643); +#38643 = CARTESIAN_POINT('',(9.000000023842,4.265,-2.145767343E-06)); +#38644 = LINE('',#38645,#38646); +#38645 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#38646 = VECTOR('',#38647,1.); +#38647 = DIRECTION('',(0.,-1.,0.)); +#38648 = ORIENTED_EDGE('',*,*,#38649,.T.); +#38649 = EDGE_CURVE('',#38642,#38650,#38652,.T.); +#38650 = VERTEX_POINT('',#38651); +#38651 = CARTESIAN_POINT('',(9.000000214576,4.265,0.799997854233)); +#38652 = LINE('',#38653,#38654); +#38653 = CARTESIAN_POINT('',(9.000000023842,4.265,-2.14576734264E-06)); +#38654 = VECTOR('',#38655,1.); +#38655 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38656 = ORIENTED_EDGE('',*,*,#38657,.F.); +#38657 = EDGE_CURVE('',#32363,#38650,#38658,.T.); +#38658 = LINE('',#38659,#38660); +#38659 = CARTESIAN_POINT('',(9.000000214576,4.44,0.799997854233)); +#38660 = VECTOR('',#38661,1.); +#38661 = DIRECTION('',(0.,-1.,0.)); +#38662 = ORIENTED_EDGE('',*,*,#32370,.T.); +#38663 = ORIENTED_EDGE('',*,*,#32378,.T.); +#38664 = ORIENTED_EDGE('',*,*,#32438,.F.); +#38665 = PLANE('',#38666); +#38666 = AXIS2_PLACEMENT_3D('',#38667,#38668,#38669); +#38667 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#38668 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38669 = DIRECTION('',(0.,1.,0.)); +#38670 = ADVANCED_FACE('',(#38671),#38682,.F.); +#38671 = FACE_BOUND('',#38672,.F.); +#38672 = EDGE_LOOP('',(#38673,#38674,#38675,#38676)); +#38673 = ORIENTED_EDGE('',*,*,#32392,.T.); +#38674 = ORIENTED_EDGE('',*,*,#38626,.T.); +#38675 = ORIENTED_EDGE('',*,*,#36013,.F.); +#38676 = ORIENTED_EDGE('',*,*,#38677,.F.); +#38677 = EDGE_CURVE('',#32393,#36014,#38678,.T.); +#38678 = LINE('',#38679,#38680); +#38679 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#38680 = VECTOR('',#38681,1.); +#38681 = DIRECTION('',(0.,0.,1.)); +#38682 = CYLINDRICAL_SURFACE('',#38683,0.275); +#38683 = AXIS2_PLACEMENT_3D('',#38684,#38685,#38686); +#38684 = CARTESIAN_POINT('',(-9.,3.99,0.)); +#38685 = DIRECTION('',(-0.,-0.,-1.)); +#38686 = DIRECTION('',(1.,0.,0.)); +#38687 = ADVANCED_FACE('',(#38688),#38695,.F.); +#38688 = FACE_BOUND('',#38689,.F.); +#38689 = EDGE_LOOP('',(#38690,#38691,#38692,#38693,#38694)); +#38690 = ORIENTED_EDGE('',*,*,#38677,.T.); +#38691 = ORIENTED_EDGE('',*,*,#36024,.T.); +#38692 = ORIENTED_EDGE('',*,*,#32525,.T.); +#38693 = ORIENTED_EDGE('',*,*,#32533,.T.); +#38694 = ORIENTED_EDGE('',*,*,#32414,.F.); +#38695 = PLANE('',#38696); +#38696 = AXIS2_PLACEMENT_3D('',#38697,#38698,#38699); +#38697 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#38698 = DIRECTION('',(1.,0.,0.)); +#38699 = DIRECTION('',(0.,-1.,0.)); +#38700 = ADVANCED_FACE('',(#38701),#38722,.F.); +#38701 = FACE_BOUND('',#38702,.F.); +#38702 = EDGE_LOOP('',(#38703,#38712,#38713,#38714,#38715,#38716)); +#38703 = ORIENTED_EDGE('',*,*,#38704,.T.); +#38704 = EDGE_CURVE('',#38705,#38642,#38707,.T.); +#38705 = VERTEX_POINT('',#38706); +#38706 = CARTESIAN_POINT('',(9.000000023842,3.715,-2.145767343E-06)); +#38707 = CIRCLE('',#38708,0.275); +#38708 = AXIS2_PLACEMENT_3D('',#38709,#38710,#38711); +#38709 = CARTESIAN_POINT('',(9.000000023842,3.99,-2.14576734264E-06)); +#38710 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#38711 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38712 = ORIENTED_EDGE('',*,*,#38641,.F.); +#38713 = ORIENTED_EDGE('',*,*,#32428,.T.); +#38714 = ORIENTED_EDGE('',*,*,#32460,.T.); +#38715 = ORIENTED_EDGE('',*,*,#32484,.T.); +#38716 = ORIENTED_EDGE('',*,*,#38717,.F.); +#38717 = EDGE_CURVE('',#38705,#32485,#38718,.T.); +#38718 = LINE('',#38719,#38720); +#38719 = CARTESIAN_POINT('',(9.000000023842,3.715,-2.14576734264E-06)); +#38720 = VECTOR('',#38721,1.); +#38721 = DIRECTION('',(0.,-1.,0.)); +#38722 = PLANE('',#38723); +#38723 = AXIS2_PLACEMENT_3D('',#38724,#38725,#38726); +#38724 = CARTESIAN_POINT('',(8.571261919915,3.99,-2.04354820701E-06)); +#38725 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38726 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38727 = ADVANCED_FACE('',(#38728),#38748,.F.); +#38728 = FACE_BOUND('',#38729,.F.); +#38729 = EDGE_LOOP('',(#38730,#38731,#38732,#38733,#38734,#38742)); +#38730 = ORIENTED_EDGE('',*,*,#38717,.T.); +#38731 = ORIENTED_EDGE('',*,*,#32495,.T.); +#38732 = ORIENTED_EDGE('',*,*,#32548,.F.); +#38733 = ORIENTED_EDGE('',*,*,#32556,.F.); +#38734 = ORIENTED_EDGE('',*,*,#38735,.F.); +#38735 = EDGE_CURVE('',#38736,#32557,#38738,.T.); +#38736 = VERTEX_POINT('',#38737); +#38737 = CARTESIAN_POINT('',(9.000000214576,3.715,0.799997854233)); +#38738 = LINE('',#38739,#38740); +#38739 = CARTESIAN_POINT('',(9.000000214576,3.715,0.799997854233)); +#38740 = VECTOR('',#38741,1.); +#38741 = DIRECTION('',(0.,-1.,0.)); +#38742 = ORIENTED_EDGE('',*,*,#38743,.F.); +#38743 = EDGE_CURVE('',#38705,#38736,#38744,.T.); +#38744 = LINE('',#38745,#38746); +#38745 = CARTESIAN_POINT('',(9.000000023842,3.715,-2.14576734264E-06)); +#38746 = VECTOR('',#38747,1.); +#38747 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38748 = PLANE('',#38749); +#38749 = AXIS2_PLACEMENT_3D('',#38750,#38751,#38752); +#38750 = CARTESIAN_POINT('',(9.000000023842,3.715,-2.14576734264E-06)); +#38751 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38752 = DIRECTION('',(0.,1.,0.)); +#38753 = ADVANCED_FACE('',(#38754),#38766,.F.); +#38754 = FACE_BOUND('',#38755,.F.); +#38755 = EDGE_LOOP('',(#38756,#38757,#38758,#38759,#38765)); +#38756 = ORIENTED_EDGE('',*,*,#32510,.F.); +#38757 = ORIENTED_EDGE('',*,*,#32518,.F.); +#38758 = ORIENTED_EDGE('',*,*,#36132,.T.); +#38759 = ORIENTED_EDGE('',*,*,#38760,.F.); +#38760 = EDGE_CURVE('',#32604,#36115,#38761,.T.); +#38761 = LINE('',#38762,#38763); +#38762 = CARTESIAN_POINT('',(-9.,2.995,0.)); +#38763 = VECTOR('',#38764,1.); +#38764 = DIRECTION('',(0.,0.,1.)); +#38765 = ORIENTED_EDGE('',*,*,#32612,.F.); +#38766 = PLANE('',#38767); +#38767 = AXIS2_PLACEMENT_3D('',#38768,#38769,#38770); +#38768 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#38769 = DIRECTION('',(1.,0.,0.)); +#38770 = DIRECTION('',(0.,-1.,0.)); +#38771 = ADVANCED_FACE('',(#38772),#38799,.F.); +#38772 = FACE_BOUND('',#38773,.F.); +#38773 = EDGE_LOOP('',(#38774,#38782,#38790,#38796,#38797,#38798)); +#38774 = ORIENTED_EDGE('',*,*,#38775,.T.); +#38775 = EDGE_CURVE('',#32638,#38776,#38778,.T.); +#38776 = VERTEX_POINT('',#38777); +#38777 = CARTESIAN_POINT('',(9.000000023842,2.995,-2.145767343E-06)); +#38778 = LINE('',#38779,#38780); +#38779 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#38780 = VECTOR('',#38781,1.); +#38781 = DIRECTION('',(0.,-1.,0.)); +#38782 = ORIENTED_EDGE('',*,*,#38783,.T.); +#38783 = EDGE_CURVE('',#38776,#38784,#38786,.T.); +#38784 = VERTEX_POINT('',#38785); +#38785 = CARTESIAN_POINT('',(9.000000214576,2.995,0.799997854233)); +#38786 = LINE('',#38787,#38788); +#38787 = CARTESIAN_POINT('',(9.000000023842,2.995,-2.14576734264E-06)); +#38788 = VECTOR('',#38789,1.); +#38789 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38790 = ORIENTED_EDGE('',*,*,#38791,.F.); +#38791 = EDGE_CURVE('',#32572,#38784,#38792,.T.); +#38792 = LINE('',#38793,#38794); +#38793 = CARTESIAN_POINT('',(9.000000214576,3.17,0.799997854233)); +#38794 = VECTOR('',#38795,1.); +#38795 = DIRECTION('',(0.,-1.,0.)); +#38796 = ORIENTED_EDGE('',*,*,#32579,.T.); +#38797 = ORIENTED_EDGE('',*,*,#32587,.T.); +#38798 = ORIENTED_EDGE('',*,*,#32647,.F.); +#38799 = PLANE('',#38800); +#38800 = AXIS2_PLACEMENT_3D('',#38801,#38802,#38803); +#38801 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#38802 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38803 = DIRECTION('',(0.,1.,0.)); +#38804 = ADVANCED_FACE('',(#38805),#38816,.F.); +#38805 = FACE_BOUND('',#38806,.F.); +#38806 = EDGE_LOOP('',(#38807,#38808,#38809,#38810)); +#38807 = ORIENTED_EDGE('',*,*,#32601,.T.); +#38808 = ORIENTED_EDGE('',*,*,#38760,.T.); +#38809 = ORIENTED_EDGE('',*,*,#36112,.F.); +#38810 = ORIENTED_EDGE('',*,*,#38811,.F.); +#38811 = EDGE_CURVE('',#32602,#36113,#38812,.T.); +#38812 = LINE('',#38813,#38814); +#38813 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#38814 = VECTOR('',#38815,1.); +#38815 = DIRECTION('',(0.,0.,1.)); +#38816 = CYLINDRICAL_SURFACE('',#38817,0.275); +#38817 = AXIS2_PLACEMENT_3D('',#38818,#38819,#38820); +#38818 = CARTESIAN_POINT('',(-9.,2.72,0.)); +#38819 = DIRECTION('',(-0.,-0.,-1.)); +#38820 = DIRECTION('',(1.,0.,0.)); +#38821 = ADVANCED_FACE('',(#38822),#38829,.F.); +#38822 = FACE_BOUND('',#38823,.F.); +#38823 = EDGE_LOOP('',(#38824,#38825,#38826,#38827,#38828)); +#38824 = ORIENTED_EDGE('',*,*,#38811,.T.); +#38825 = ORIENTED_EDGE('',*,*,#36123,.T.); +#38826 = ORIENTED_EDGE('',*,*,#32734,.T.); +#38827 = ORIENTED_EDGE('',*,*,#32742,.T.); +#38828 = ORIENTED_EDGE('',*,*,#32623,.F.); +#38829 = PLANE('',#38830); +#38830 = AXIS2_PLACEMENT_3D('',#38831,#38832,#38833); +#38831 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#38832 = DIRECTION('',(1.,0.,0.)); +#38833 = DIRECTION('',(0.,-1.,0.)); +#38834 = ADVANCED_FACE('',(#38835),#38856,.F.); +#38835 = FACE_BOUND('',#38836,.F.); +#38836 = EDGE_LOOP('',(#38837,#38846,#38847,#38848,#38849,#38850)); +#38837 = ORIENTED_EDGE('',*,*,#38838,.T.); +#38838 = EDGE_CURVE('',#38839,#38776,#38841,.T.); +#38839 = VERTEX_POINT('',#38840); +#38840 = CARTESIAN_POINT('',(9.000000023842,2.445,-2.145767343E-06)); +#38841 = CIRCLE('',#38842,0.275); +#38842 = AXIS2_PLACEMENT_3D('',#38843,#38844,#38845); +#38843 = CARTESIAN_POINT('',(9.000000023842,2.72,-2.14576734264E-06)); +#38844 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#38845 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38846 = ORIENTED_EDGE('',*,*,#38775,.F.); +#38847 = ORIENTED_EDGE('',*,*,#32637,.T.); +#38848 = ORIENTED_EDGE('',*,*,#32669,.T.); +#38849 = ORIENTED_EDGE('',*,*,#32693,.T.); +#38850 = ORIENTED_EDGE('',*,*,#38851,.F.); +#38851 = EDGE_CURVE('',#38839,#32694,#38852,.T.); +#38852 = LINE('',#38853,#38854); +#38853 = CARTESIAN_POINT('',(9.000000023842,2.445,-2.14576734264E-06)); +#38854 = VECTOR('',#38855,1.); +#38855 = DIRECTION('',(0.,-1.,0.)); +#38856 = PLANE('',#38857); +#38857 = AXIS2_PLACEMENT_3D('',#38858,#38859,#38860); +#38858 = CARTESIAN_POINT('',(8.571261919915,2.72,-2.04354820701E-06)); +#38859 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38860 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38861 = ADVANCED_FACE('',(#38862),#38882,.F.); +#38862 = FACE_BOUND('',#38863,.F.); +#38863 = EDGE_LOOP('',(#38864,#38865,#38866,#38867,#38868,#38876)); +#38864 = ORIENTED_EDGE('',*,*,#38851,.T.); +#38865 = ORIENTED_EDGE('',*,*,#32704,.T.); +#38866 = ORIENTED_EDGE('',*,*,#32757,.F.); +#38867 = ORIENTED_EDGE('',*,*,#32765,.F.); +#38868 = ORIENTED_EDGE('',*,*,#38869,.F.); +#38869 = EDGE_CURVE('',#38870,#32766,#38872,.T.); +#38870 = VERTEX_POINT('',#38871); +#38871 = CARTESIAN_POINT('',(9.000000214576,2.445,0.799997854233)); +#38872 = LINE('',#38873,#38874); +#38873 = CARTESIAN_POINT('',(9.000000214576,2.445,0.799997854233)); +#38874 = VECTOR('',#38875,1.); +#38875 = DIRECTION('',(0.,-1.,0.)); +#38876 = ORIENTED_EDGE('',*,*,#38877,.F.); +#38877 = EDGE_CURVE('',#38839,#38870,#38878,.T.); +#38878 = LINE('',#38879,#38880); +#38879 = CARTESIAN_POINT('',(9.000000023842,2.445,-2.14576734264E-06)); +#38880 = VECTOR('',#38881,1.); +#38881 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38882 = PLANE('',#38883); +#38883 = AXIS2_PLACEMENT_3D('',#38884,#38885,#38886); +#38884 = CARTESIAN_POINT('',(9.000000023842,2.445,-2.14576734264E-06)); +#38885 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38886 = DIRECTION('',(0.,1.,0.)); +#38887 = ADVANCED_FACE('',(#38888),#38900,.F.); +#38888 = FACE_BOUND('',#38889,.F.); +#38889 = EDGE_LOOP('',(#38890,#38891,#38892,#38893,#38899)); +#38890 = ORIENTED_EDGE('',*,*,#32719,.F.); +#38891 = ORIENTED_EDGE('',*,*,#32727,.F.); +#38892 = ORIENTED_EDGE('',*,*,#36231,.T.); +#38893 = ORIENTED_EDGE('',*,*,#38894,.F.); +#38894 = EDGE_CURVE('',#32813,#36214,#38895,.T.); +#38895 = LINE('',#38896,#38897); +#38896 = CARTESIAN_POINT('',(-9.,1.725,0.)); +#38897 = VECTOR('',#38898,1.); +#38898 = DIRECTION('',(0.,0.,1.)); +#38899 = ORIENTED_EDGE('',*,*,#32821,.F.); +#38900 = PLANE('',#38901); +#38901 = AXIS2_PLACEMENT_3D('',#38902,#38903,#38904); +#38902 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#38903 = DIRECTION('',(1.,0.,0.)); +#38904 = DIRECTION('',(0.,-1.,0.)); +#38905 = ADVANCED_FACE('',(#38906),#38933,.F.); +#38906 = FACE_BOUND('',#38907,.F.); +#38907 = EDGE_LOOP('',(#38908,#38916,#38924,#38930,#38931,#38932)); +#38908 = ORIENTED_EDGE('',*,*,#38909,.T.); +#38909 = EDGE_CURVE('',#32847,#38910,#38912,.T.); +#38910 = VERTEX_POINT('',#38911); +#38911 = CARTESIAN_POINT('',(9.000000023842,1.725,-2.145767343E-06)); +#38912 = LINE('',#38913,#38914); +#38913 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#38914 = VECTOR('',#38915,1.); +#38915 = DIRECTION('',(0.,-1.,0.)); +#38916 = ORIENTED_EDGE('',*,*,#38917,.T.); +#38917 = EDGE_CURVE('',#38910,#38918,#38920,.T.); +#38918 = VERTEX_POINT('',#38919); +#38919 = CARTESIAN_POINT('',(9.000000214576,1.725,0.799997854233)); +#38920 = LINE('',#38921,#38922); +#38921 = CARTESIAN_POINT('',(9.000000023842,1.725,-2.14576734264E-06)); +#38922 = VECTOR('',#38923,1.); +#38923 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38924 = ORIENTED_EDGE('',*,*,#38925,.F.); +#38925 = EDGE_CURVE('',#32781,#38918,#38926,.T.); +#38926 = LINE('',#38927,#38928); +#38927 = CARTESIAN_POINT('',(9.000000214576,1.9,0.799997854233)); +#38928 = VECTOR('',#38929,1.); +#38929 = DIRECTION('',(0.,-1.,0.)); +#38930 = ORIENTED_EDGE('',*,*,#32788,.T.); +#38931 = ORIENTED_EDGE('',*,*,#32796,.T.); +#38932 = ORIENTED_EDGE('',*,*,#32856,.F.); +#38933 = PLANE('',#38934); +#38934 = AXIS2_PLACEMENT_3D('',#38935,#38936,#38937); +#38935 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#38936 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38937 = DIRECTION('',(0.,1.,0.)); +#38938 = ADVANCED_FACE('',(#38939),#38950,.F.); +#38939 = FACE_BOUND('',#38940,.F.); +#38940 = EDGE_LOOP('',(#38941,#38942,#38943,#38944)); +#38941 = ORIENTED_EDGE('',*,*,#32810,.T.); +#38942 = ORIENTED_EDGE('',*,*,#38894,.T.); +#38943 = ORIENTED_EDGE('',*,*,#36211,.F.); +#38944 = ORIENTED_EDGE('',*,*,#38945,.F.); +#38945 = EDGE_CURVE('',#32811,#36212,#38946,.T.); +#38946 = LINE('',#38947,#38948); +#38947 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#38948 = VECTOR('',#38949,1.); +#38949 = DIRECTION('',(0.,0.,1.)); +#38950 = CYLINDRICAL_SURFACE('',#38951,0.275); +#38951 = AXIS2_PLACEMENT_3D('',#38952,#38953,#38954); +#38952 = CARTESIAN_POINT('',(-9.,1.45,0.)); +#38953 = DIRECTION('',(-0.,-0.,-1.)); +#38954 = DIRECTION('',(1.,0.,0.)); +#38955 = ADVANCED_FACE('',(#38956),#38963,.F.); +#38956 = FACE_BOUND('',#38957,.F.); +#38957 = EDGE_LOOP('',(#38958,#38959,#38960,#38961,#38962)); +#38958 = ORIENTED_EDGE('',*,*,#38945,.T.); +#38959 = ORIENTED_EDGE('',*,*,#36222,.T.); +#38960 = ORIENTED_EDGE('',*,*,#32943,.T.); +#38961 = ORIENTED_EDGE('',*,*,#32951,.T.); +#38962 = ORIENTED_EDGE('',*,*,#32832,.F.); +#38963 = PLANE('',#38964); +#38964 = AXIS2_PLACEMENT_3D('',#38965,#38966,#38967); +#38965 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#38966 = DIRECTION('',(1.,0.,0.)); +#38967 = DIRECTION('',(0.,-1.,0.)); +#38968 = ADVANCED_FACE('',(#38969),#38990,.F.); +#38969 = FACE_BOUND('',#38970,.F.); +#38970 = EDGE_LOOP('',(#38971,#38980,#38981,#38982,#38983,#38984)); +#38971 = ORIENTED_EDGE('',*,*,#38972,.T.); +#38972 = EDGE_CURVE('',#38973,#38910,#38975,.T.); +#38973 = VERTEX_POINT('',#38974); +#38974 = CARTESIAN_POINT('',(9.000000023842,1.175,-2.145767343E-06)); +#38975 = CIRCLE('',#38976,0.275); +#38976 = AXIS2_PLACEMENT_3D('',#38977,#38978,#38979); +#38977 = CARTESIAN_POINT('',(9.000000023842,1.45,-2.14576734264E-06)); +#38978 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#38979 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38980 = ORIENTED_EDGE('',*,*,#38909,.F.); +#38981 = ORIENTED_EDGE('',*,*,#32846,.T.); +#38982 = ORIENTED_EDGE('',*,*,#32878,.T.); +#38983 = ORIENTED_EDGE('',*,*,#32902,.T.); +#38984 = ORIENTED_EDGE('',*,*,#38985,.F.); +#38985 = EDGE_CURVE('',#38973,#32903,#38986,.T.); +#38986 = LINE('',#38987,#38988); +#38987 = CARTESIAN_POINT('',(9.000000023842,1.175,-2.14576734264E-06)); +#38988 = VECTOR('',#38989,1.); +#38989 = DIRECTION('',(0.,-1.,0.)); +#38990 = PLANE('',#38991); +#38991 = AXIS2_PLACEMENT_3D('',#38992,#38993,#38994); +#38992 = CARTESIAN_POINT('',(8.571261919915,1.45,-2.04354820701E-06)); +#38993 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#38994 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38995 = ADVANCED_FACE('',(#38996),#39016,.F.); +#38996 = FACE_BOUND('',#38997,.F.); +#38997 = EDGE_LOOP('',(#38998,#38999,#39000,#39001,#39002,#39010)); +#38998 = ORIENTED_EDGE('',*,*,#38985,.T.); +#38999 = ORIENTED_EDGE('',*,*,#32913,.T.); +#39000 = ORIENTED_EDGE('',*,*,#32966,.F.); +#39001 = ORIENTED_EDGE('',*,*,#32974,.F.); +#39002 = ORIENTED_EDGE('',*,*,#39003,.F.); +#39003 = EDGE_CURVE('',#39004,#32975,#39006,.T.); +#39004 = VERTEX_POINT('',#39005); +#39005 = CARTESIAN_POINT('',(9.000000214576,1.175,0.799997854233)); +#39006 = LINE('',#39007,#39008); +#39007 = CARTESIAN_POINT('',(9.000000214576,1.175,0.799997854233)); +#39008 = VECTOR('',#39009,1.); +#39009 = DIRECTION('',(0.,-1.,0.)); +#39010 = ORIENTED_EDGE('',*,*,#39011,.F.); +#39011 = EDGE_CURVE('',#38973,#39004,#39012,.T.); +#39012 = LINE('',#39013,#39014); +#39013 = CARTESIAN_POINT('',(9.000000023842,1.175,-2.14576734264E-06)); +#39014 = VECTOR('',#39015,1.); +#39015 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39016 = PLANE('',#39017); +#39017 = AXIS2_PLACEMENT_3D('',#39018,#39019,#39020); +#39018 = CARTESIAN_POINT('',(9.000000023842,1.175,-2.14576734264E-06)); +#39019 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39020 = DIRECTION('',(0.,1.,0.)); +#39021 = ADVANCED_FACE('',(#39022),#39034,.F.); +#39022 = FACE_BOUND('',#39023,.F.); +#39023 = EDGE_LOOP('',(#39024,#39025,#39026,#39027,#39033)); +#39024 = ORIENTED_EDGE('',*,*,#32928,.F.); +#39025 = ORIENTED_EDGE('',*,*,#32936,.F.); +#39026 = ORIENTED_EDGE('',*,*,#36330,.T.); +#39027 = ORIENTED_EDGE('',*,*,#39028,.F.); +#39028 = EDGE_CURVE('',#33022,#36313,#39029,.T.); +#39029 = LINE('',#39030,#39031); +#39030 = CARTESIAN_POINT('',(-9.,0.455,0.)); +#39031 = VECTOR('',#39032,1.); +#39032 = DIRECTION('',(0.,0.,1.)); +#39033 = ORIENTED_EDGE('',*,*,#33030,.F.); +#39034 = PLANE('',#39035); +#39035 = AXIS2_PLACEMENT_3D('',#39036,#39037,#39038); +#39036 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#39037 = DIRECTION('',(1.,0.,0.)); +#39038 = DIRECTION('',(0.,-1.,0.)); +#39039 = ADVANCED_FACE('',(#39040),#39067,.F.); +#39040 = FACE_BOUND('',#39041,.F.); +#39041 = EDGE_LOOP('',(#39042,#39050,#39058,#39064,#39065,#39066)); +#39042 = ORIENTED_EDGE('',*,*,#39043,.T.); +#39043 = EDGE_CURVE('',#33056,#39044,#39046,.T.); +#39044 = VERTEX_POINT('',#39045); +#39045 = CARTESIAN_POINT('',(9.000000023842,0.455,-2.145767343E-06)); +#39046 = LINE('',#39047,#39048); +#39047 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#39048 = VECTOR('',#39049,1.); +#39049 = DIRECTION('',(0.,-1.,0.)); +#39050 = ORIENTED_EDGE('',*,*,#39051,.T.); +#39051 = EDGE_CURVE('',#39044,#39052,#39054,.T.); +#39052 = VERTEX_POINT('',#39053); +#39053 = CARTESIAN_POINT('',(9.000000214576,0.455,0.799997854233)); +#39054 = LINE('',#39055,#39056); +#39055 = CARTESIAN_POINT('',(9.000000023842,0.455,-2.14576734264E-06)); +#39056 = VECTOR('',#39057,1.); +#39057 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39058 = ORIENTED_EDGE('',*,*,#39059,.F.); +#39059 = EDGE_CURVE('',#32990,#39052,#39060,.T.); +#39060 = LINE('',#39061,#39062); +#39061 = CARTESIAN_POINT('',(9.000000214576,0.63,0.799997854233)); +#39062 = VECTOR('',#39063,1.); +#39063 = DIRECTION('',(0.,-1.,0.)); +#39064 = ORIENTED_EDGE('',*,*,#32997,.T.); +#39065 = ORIENTED_EDGE('',*,*,#33005,.T.); +#39066 = ORIENTED_EDGE('',*,*,#33065,.F.); +#39067 = PLANE('',#39068); +#39068 = AXIS2_PLACEMENT_3D('',#39069,#39070,#39071); +#39069 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#39070 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39071 = DIRECTION('',(0.,1.,0.)); +#39072 = ADVANCED_FACE('',(#39073),#39084,.F.); +#39073 = FACE_BOUND('',#39074,.F.); +#39074 = EDGE_LOOP('',(#39075,#39076,#39077,#39078)); +#39075 = ORIENTED_EDGE('',*,*,#33019,.T.); +#39076 = ORIENTED_EDGE('',*,*,#39028,.T.); +#39077 = ORIENTED_EDGE('',*,*,#36310,.F.); +#39078 = ORIENTED_EDGE('',*,*,#39079,.F.); +#39079 = EDGE_CURVE('',#33020,#36311,#39080,.T.); +#39080 = LINE('',#39081,#39082); +#39081 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#39082 = VECTOR('',#39083,1.); +#39083 = DIRECTION('',(0.,0.,1.)); +#39084 = CYLINDRICAL_SURFACE('',#39085,0.275); +#39085 = AXIS2_PLACEMENT_3D('',#39086,#39087,#39088); +#39086 = CARTESIAN_POINT('',(-9.,0.18,0.)); +#39087 = DIRECTION('',(-0.,-0.,-1.)); +#39088 = DIRECTION('',(1.,0.,0.)); +#39089 = ADVANCED_FACE('',(#39090),#39097,.F.); +#39090 = FACE_BOUND('',#39091,.F.); +#39091 = EDGE_LOOP('',(#39092,#39093,#39094,#39095,#39096)); +#39092 = ORIENTED_EDGE('',*,*,#39079,.T.); +#39093 = ORIENTED_EDGE('',*,*,#36321,.T.); +#39094 = ORIENTED_EDGE('',*,*,#33152,.T.); +#39095 = ORIENTED_EDGE('',*,*,#33160,.T.); +#39096 = ORIENTED_EDGE('',*,*,#33041,.F.); +#39097 = PLANE('',#39098); +#39098 = AXIS2_PLACEMENT_3D('',#39099,#39100,#39101); +#39099 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#39100 = DIRECTION('',(1.,0.,0.)); +#39101 = DIRECTION('',(0.,-1.,0.)); +#39102 = ADVANCED_FACE('',(#39103),#39124,.F.); +#39103 = FACE_BOUND('',#39104,.F.); +#39104 = EDGE_LOOP('',(#39105,#39114,#39115,#39116,#39117,#39118)); +#39105 = ORIENTED_EDGE('',*,*,#39106,.T.); +#39106 = EDGE_CURVE('',#39107,#39044,#39109,.T.); +#39107 = VERTEX_POINT('',#39108); +#39108 = CARTESIAN_POINT('',(9.000000023842,-9.5E-02,-2.145767343E-06)); +#39109 = CIRCLE('',#39110,0.275); +#39110 = AXIS2_PLACEMENT_3D('',#39111,#39112,#39113); +#39111 = CARTESIAN_POINT('',(9.000000023842,0.18,-2.14576734264E-06)); +#39112 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#39113 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39114 = ORIENTED_EDGE('',*,*,#39043,.F.); +#39115 = ORIENTED_EDGE('',*,*,#33055,.T.); +#39116 = ORIENTED_EDGE('',*,*,#33087,.T.); +#39117 = ORIENTED_EDGE('',*,*,#33111,.T.); +#39118 = ORIENTED_EDGE('',*,*,#39119,.F.); +#39119 = EDGE_CURVE('',#39107,#33112,#39120,.T.); +#39120 = LINE('',#39121,#39122); +#39121 = CARTESIAN_POINT('',(9.000000023842,-9.5E-02,-2.14576734264E-06) + ); +#39122 = VECTOR('',#39123,1.); +#39123 = DIRECTION('',(0.,-1.,0.)); +#39124 = PLANE('',#39125); +#39125 = AXIS2_PLACEMENT_3D('',#39126,#39127,#39128); +#39126 = CARTESIAN_POINT('',(8.571261919915,0.18,-2.04354820701E-06)); +#39127 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39128 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#39129 = ADVANCED_FACE('',(#39130),#39150,.F.); +#39130 = FACE_BOUND('',#39131,.F.); +#39131 = EDGE_LOOP('',(#39132,#39133,#39134,#39135,#39136,#39144)); +#39132 = ORIENTED_EDGE('',*,*,#39119,.T.); +#39133 = ORIENTED_EDGE('',*,*,#33122,.T.); +#39134 = ORIENTED_EDGE('',*,*,#33175,.F.); +#39135 = ORIENTED_EDGE('',*,*,#33183,.F.); +#39136 = ORIENTED_EDGE('',*,*,#39137,.F.); +#39137 = EDGE_CURVE('',#39138,#33184,#39140,.T.); +#39138 = VERTEX_POINT('',#39139); +#39139 = CARTESIAN_POINT('',(9.000000214576,-9.5E-02,0.799997854233)); +#39140 = LINE('',#39141,#39142); +#39141 = CARTESIAN_POINT('',(9.000000214576,-9.5E-02,0.799997854233)); +#39142 = VECTOR('',#39143,1.); +#39143 = DIRECTION('',(0.,-1.,0.)); +#39144 = ORIENTED_EDGE('',*,*,#39145,.F.); +#39145 = EDGE_CURVE('',#39107,#39138,#39146,.T.); +#39146 = LINE('',#39147,#39148); +#39147 = CARTESIAN_POINT('',(9.000000023842,-9.5E-02,-2.14576734264E-06) + ); +#39148 = VECTOR('',#39149,1.); +#39149 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39150 = PLANE('',#39151); +#39151 = AXIS2_PLACEMENT_3D('',#39152,#39153,#39154); +#39152 = CARTESIAN_POINT('',(9.000000023842,-9.5E-02,-2.14576734264E-06) + ); +#39153 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39154 = DIRECTION('',(0.,1.,0.)); +#39155 = ADVANCED_FACE('',(#39156),#39168,.F.); +#39156 = FACE_BOUND('',#39157,.F.); +#39157 = EDGE_LOOP('',(#39158,#39159,#39160,#39161,#39167)); +#39158 = ORIENTED_EDGE('',*,*,#33137,.F.); +#39159 = ORIENTED_EDGE('',*,*,#33145,.F.); +#39160 = ORIENTED_EDGE('',*,*,#36429,.T.); +#39161 = ORIENTED_EDGE('',*,*,#39162,.F.); +#39162 = EDGE_CURVE('',#33231,#36412,#39163,.T.); +#39163 = LINE('',#39164,#39165); +#39164 = CARTESIAN_POINT('',(-9.,-0.815,0.)); +#39165 = VECTOR('',#39166,1.); +#39166 = DIRECTION('',(0.,0.,1.)); +#39167 = ORIENTED_EDGE('',*,*,#33239,.F.); +#39168 = PLANE('',#39169); +#39169 = AXIS2_PLACEMENT_3D('',#39170,#39171,#39172); +#39170 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#39171 = DIRECTION('',(1.,0.,0.)); +#39172 = DIRECTION('',(0.,-1.,0.)); +#39173 = ADVANCED_FACE('',(#39174),#39201,.F.); +#39174 = FACE_BOUND('',#39175,.F.); +#39175 = EDGE_LOOP('',(#39176,#39184,#39192,#39198,#39199,#39200)); +#39176 = ORIENTED_EDGE('',*,*,#39177,.T.); +#39177 = EDGE_CURVE('',#33265,#39178,#39180,.T.); +#39178 = VERTEX_POINT('',#39179); +#39179 = CARTESIAN_POINT('',(9.000000023842,-0.815,-2.145767343E-06)); +#39180 = LINE('',#39181,#39182); +#39181 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#39182 = VECTOR('',#39183,1.); +#39183 = DIRECTION('',(0.,-1.,0.)); +#39184 = ORIENTED_EDGE('',*,*,#39185,.T.); +#39185 = EDGE_CURVE('',#39178,#39186,#39188,.T.); +#39186 = VERTEX_POINT('',#39187); +#39187 = CARTESIAN_POINT('',(9.000000214576,-0.815,0.799997854233)); +#39188 = LINE('',#39189,#39190); +#39189 = CARTESIAN_POINT('',(9.000000023842,-0.815,-2.14576734264E-06)); +#39190 = VECTOR('',#39191,1.); +#39191 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39192 = ORIENTED_EDGE('',*,*,#39193,.F.); +#39193 = EDGE_CURVE('',#33199,#39186,#39194,.T.); +#39194 = LINE('',#39195,#39196); +#39195 = CARTESIAN_POINT('',(9.000000214576,-0.64,0.799997854233)); +#39196 = VECTOR('',#39197,1.); +#39197 = DIRECTION('',(0.,-1.,0.)); +#39198 = ORIENTED_EDGE('',*,*,#33206,.T.); +#39199 = ORIENTED_EDGE('',*,*,#33214,.T.); +#39200 = ORIENTED_EDGE('',*,*,#33274,.F.); +#39201 = PLANE('',#39202); +#39202 = AXIS2_PLACEMENT_3D('',#39203,#39204,#39205); +#39203 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#39204 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39205 = DIRECTION('',(0.,1.,0.)); +#39206 = ADVANCED_FACE('',(#39207),#39218,.F.); +#39207 = FACE_BOUND('',#39208,.F.); +#39208 = EDGE_LOOP('',(#39209,#39210,#39211,#39212)); +#39209 = ORIENTED_EDGE('',*,*,#33228,.T.); +#39210 = ORIENTED_EDGE('',*,*,#39162,.T.); +#39211 = ORIENTED_EDGE('',*,*,#36409,.F.); +#39212 = ORIENTED_EDGE('',*,*,#39213,.F.); +#39213 = EDGE_CURVE('',#33229,#36410,#39214,.T.); +#39214 = LINE('',#39215,#39216); +#39215 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#39216 = VECTOR('',#39217,1.); +#39217 = DIRECTION('',(0.,0.,1.)); +#39218 = CYLINDRICAL_SURFACE('',#39219,0.275); +#39219 = AXIS2_PLACEMENT_3D('',#39220,#39221,#39222); +#39220 = CARTESIAN_POINT('',(-9.,-1.09,0.)); +#39221 = DIRECTION('',(-0.,-0.,-1.)); +#39222 = DIRECTION('',(1.,0.,0.)); +#39223 = ADVANCED_FACE('',(#39224),#39231,.F.); +#39224 = FACE_BOUND('',#39225,.F.); +#39225 = EDGE_LOOP('',(#39226,#39227,#39228,#39229,#39230)); +#39226 = ORIENTED_EDGE('',*,*,#39213,.T.); +#39227 = ORIENTED_EDGE('',*,*,#36420,.T.); +#39228 = ORIENTED_EDGE('',*,*,#33361,.T.); +#39229 = ORIENTED_EDGE('',*,*,#33369,.T.); +#39230 = ORIENTED_EDGE('',*,*,#33250,.F.); +#39231 = PLANE('',#39232); +#39232 = AXIS2_PLACEMENT_3D('',#39233,#39234,#39235); +#39233 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#39234 = DIRECTION('',(1.,0.,0.)); +#39235 = DIRECTION('',(0.,-1.,0.)); +#39236 = ADVANCED_FACE('',(#39237),#39258,.F.); +#39237 = FACE_BOUND('',#39238,.F.); +#39238 = EDGE_LOOP('',(#39239,#39248,#39249,#39250,#39251,#39252)); +#39239 = ORIENTED_EDGE('',*,*,#39240,.T.); +#39240 = EDGE_CURVE('',#39241,#39178,#39243,.T.); +#39241 = VERTEX_POINT('',#39242); +#39242 = CARTESIAN_POINT('',(9.000000023842,-1.365,-2.145767343E-06)); +#39243 = CIRCLE('',#39244,0.275); +#39244 = AXIS2_PLACEMENT_3D('',#39245,#39246,#39247); +#39245 = CARTESIAN_POINT('',(9.000000023842,-1.09,-2.14576734264E-06)); +#39246 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#39247 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39248 = ORIENTED_EDGE('',*,*,#39177,.F.); +#39249 = ORIENTED_EDGE('',*,*,#33264,.T.); +#39250 = ORIENTED_EDGE('',*,*,#33296,.T.); +#39251 = ORIENTED_EDGE('',*,*,#33320,.T.); +#39252 = ORIENTED_EDGE('',*,*,#39253,.F.); +#39253 = EDGE_CURVE('',#39241,#33321,#39254,.T.); +#39254 = LINE('',#39255,#39256); +#39255 = CARTESIAN_POINT('',(9.000000023842,-1.365,-2.14576734264E-06)); +#39256 = VECTOR('',#39257,1.); +#39257 = DIRECTION('',(0.,-1.,0.)); +#39258 = PLANE('',#39259); +#39259 = AXIS2_PLACEMENT_3D('',#39260,#39261,#39262); +#39260 = CARTESIAN_POINT('',(8.571261919915,-1.09,-2.04354820701E-06)); +#39261 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39262 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#39263 = ADVANCED_FACE('',(#39264),#39284,.F.); +#39264 = FACE_BOUND('',#39265,.F.); +#39265 = EDGE_LOOP('',(#39266,#39267,#39268,#39269,#39270,#39278)); +#39266 = ORIENTED_EDGE('',*,*,#39253,.T.); +#39267 = ORIENTED_EDGE('',*,*,#33331,.T.); +#39268 = ORIENTED_EDGE('',*,*,#33384,.F.); +#39269 = ORIENTED_EDGE('',*,*,#33392,.F.); +#39270 = ORIENTED_EDGE('',*,*,#39271,.F.); +#39271 = EDGE_CURVE('',#39272,#33393,#39274,.T.); +#39272 = VERTEX_POINT('',#39273); +#39273 = CARTESIAN_POINT('',(9.000000214576,-1.365,0.799997854233)); +#39274 = LINE('',#39275,#39276); +#39275 = CARTESIAN_POINT('',(9.000000214576,-1.365,0.799997854233)); +#39276 = VECTOR('',#39277,1.); +#39277 = DIRECTION('',(0.,-1.,0.)); +#39278 = ORIENTED_EDGE('',*,*,#39279,.F.); +#39279 = EDGE_CURVE('',#39241,#39272,#39280,.T.); +#39280 = LINE('',#39281,#39282); +#39281 = CARTESIAN_POINT('',(9.000000023842,-1.365,-2.14576734264E-06)); +#39282 = VECTOR('',#39283,1.); +#39283 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39284 = PLANE('',#39285); +#39285 = AXIS2_PLACEMENT_3D('',#39286,#39287,#39288); +#39286 = CARTESIAN_POINT('',(9.000000023842,-1.365,-2.14576734264E-06)); +#39287 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39288 = DIRECTION('',(0.,1.,0.)); +#39289 = ADVANCED_FACE('',(#39290),#39302,.F.); +#39290 = FACE_BOUND('',#39291,.F.); +#39291 = EDGE_LOOP('',(#39292,#39293,#39294,#39295,#39301)); +#39292 = ORIENTED_EDGE('',*,*,#33346,.F.); +#39293 = ORIENTED_EDGE('',*,*,#33354,.F.); +#39294 = ORIENTED_EDGE('',*,*,#36528,.T.); +#39295 = ORIENTED_EDGE('',*,*,#39296,.F.); +#39296 = EDGE_CURVE('',#33440,#36511,#39297,.T.); +#39297 = LINE('',#39298,#39299); +#39298 = CARTESIAN_POINT('',(-9.,-2.085,0.)); +#39299 = VECTOR('',#39300,1.); +#39300 = DIRECTION('',(0.,0.,1.)); +#39301 = ORIENTED_EDGE('',*,*,#33448,.F.); +#39302 = PLANE('',#39303); +#39303 = AXIS2_PLACEMENT_3D('',#39304,#39305,#39306); +#39304 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#39305 = DIRECTION('',(1.,0.,0.)); +#39306 = DIRECTION('',(0.,-1.,0.)); +#39307 = ADVANCED_FACE('',(#39308),#39335,.F.); +#39308 = FACE_BOUND('',#39309,.F.); +#39309 = EDGE_LOOP('',(#39310,#39318,#39326,#39332,#39333,#39334)); +#39310 = ORIENTED_EDGE('',*,*,#39311,.T.); +#39311 = EDGE_CURVE('',#33474,#39312,#39314,.T.); +#39312 = VERTEX_POINT('',#39313); +#39313 = CARTESIAN_POINT('',(9.000000023842,-2.085,-2.145767343E-06)); +#39314 = LINE('',#39315,#39316); +#39315 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#39316 = VECTOR('',#39317,1.); +#39317 = DIRECTION('',(0.,-1.,0.)); +#39318 = ORIENTED_EDGE('',*,*,#39319,.T.); +#39319 = EDGE_CURVE('',#39312,#39320,#39322,.T.); +#39320 = VERTEX_POINT('',#39321); +#39321 = CARTESIAN_POINT('',(9.000000214576,-2.085,0.799997854233)); +#39322 = LINE('',#39323,#39324); +#39323 = CARTESIAN_POINT('',(9.000000023842,-2.085,-2.14576734264E-06)); +#39324 = VECTOR('',#39325,1.); +#39325 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39326 = ORIENTED_EDGE('',*,*,#39327,.F.); +#39327 = EDGE_CURVE('',#33408,#39320,#39328,.T.); +#39328 = LINE('',#39329,#39330); +#39329 = CARTESIAN_POINT('',(9.000000214576,-1.91,0.799997854233)); +#39330 = VECTOR('',#39331,1.); +#39331 = DIRECTION('',(0.,-1.,0.)); +#39332 = ORIENTED_EDGE('',*,*,#33415,.T.); +#39333 = ORIENTED_EDGE('',*,*,#33423,.T.); +#39334 = ORIENTED_EDGE('',*,*,#33483,.F.); +#39335 = PLANE('',#39336); +#39336 = AXIS2_PLACEMENT_3D('',#39337,#39338,#39339); +#39337 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#39338 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39339 = DIRECTION('',(0.,1.,0.)); +#39340 = ADVANCED_FACE('',(#39341),#39352,.F.); +#39341 = FACE_BOUND('',#39342,.F.); +#39342 = EDGE_LOOP('',(#39343,#39344,#39345,#39346)); +#39343 = ORIENTED_EDGE('',*,*,#33437,.T.); +#39344 = ORIENTED_EDGE('',*,*,#39296,.T.); +#39345 = ORIENTED_EDGE('',*,*,#36508,.F.); +#39346 = ORIENTED_EDGE('',*,*,#39347,.F.); +#39347 = EDGE_CURVE('',#33438,#36509,#39348,.T.); +#39348 = LINE('',#39349,#39350); +#39349 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#39350 = VECTOR('',#39351,1.); +#39351 = DIRECTION('',(0.,0.,1.)); +#39352 = CYLINDRICAL_SURFACE('',#39353,0.275); +#39353 = AXIS2_PLACEMENT_3D('',#39354,#39355,#39356); +#39354 = CARTESIAN_POINT('',(-9.,-2.36,0.)); +#39355 = DIRECTION('',(-0.,-0.,-1.)); +#39356 = DIRECTION('',(1.,0.,0.)); +#39357 = ADVANCED_FACE('',(#39358),#39365,.F.); +#39358 = FACE_BOUND('',#39359,.F.); +#39359 = EDGE_LOOP('',(#39360,#39361,#39362,#39363,#39364)); +#39360 = ORIENTED_EDGE('',*,*,#39347,.T.); +#39361 = ORIENTED_EDGE('',*,*,#36519,.T.); +#39362 = ORIENTED_EDGE('',*,*,#33570,.T.); +#39363 = ORIENTED_EDGE('',*,*,#33578,.T.); +#39364 = ORIENTED_EDGE('',*,*,#33459,.F.); +#39365 = PLANE('',#39366); +#39366 = AXIS2_PLACEMENT_3D('',#39367,#39368,#39369); +#39367 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#39368 = DIRECTION('',(1.,0.,0.)); +#39369 = DIRECTION('',(0.,-1.,0.)); +#39370 = ADVANCED_FACE('',(#39371),#39392,.F.); +#39371 = FACE_BOUND('',#39372,.F.); +#39372 = EDGE_LOOP('',(#39373,#39382,#39383,#39384,#39385,#39386)); +#39373 = ORIENTED_EDGE('',*,*,#39374,.T.); +#39374 = EDGE_CURVE('',#39375,#39312,#39377,.T.); +#39375 = VERTEX_POINT('',#39376); +#39376 = CARTESIAN_POINT('',(9.000000023842,-2.635,-2.145767343E-06)); +#39377 = CIRCLE('',#39378,0.275); +#39378 = AXIS2_PLACEMENT_3D('',#39379,#39380,#39381); +#39379 = CARTESIAN_POINT('',(9.000000023842,-2.36,-2.14576734264E-06)); +#39380 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#39381 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39382 = ORIENTED_EDGE('',*,*,#39311,.F.); +#39383 = ORIENTED_EDGE('',*,*,#33473,.T.); +#39384 = ORIENTED_EDGE('',*,*,#33505,.T.); +#39385 = ORIENTED_EDGE('',*,*,#33529,.T.); +#39386 = ORIENTED_EDGE('',*,*,#39387,.F.); +#39387 = EDGE_CURVE('',#39375,#33530,#39388,.T.); +#39388 = LINE('',#39389,#39390); +#39389 = CARTESIAN_POINT('',(9.000000023842,-2.635,-2.14576734264E-06)); +#39390 = VECTOR('',#39391,1.); +#39391 = DIRECTION('',(0.,-1.,0.)); +#39392 = PLANE('',#39393); +#39393 = AXIS2_PLACEMENT_3D('',#39394,#39395,#39396); +#39394 = CARTESIAN_POINT('',(8.571261919915,-2.36,-2.04354820701E-06)); +#39395 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39396 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#39397 = ADVANCED_FACE('',(#39398),#39418,.F.); +#39398 = FACE_BOUND('',#39399,.F.); +#39399 = EDGE_LOOP('',(#39400,#39401,#39402,#39403,#39404,#39412)); +#39400 = ORIENTED_EDGE('',*,*,#39387,.T.); +#39401 = ORIENTED_EDGE('',*,*,#33540,.T.); +#39402 = ORIENTED_EDGE('',*,*,#33593,.F.); +#39403 = ORIENTED_EDGE('',*,*,#33601,.F.); +#39404 = ORIENTED_EDGE('',*,*,#39405,.F.); +#39405 = EDGE_CURVE('',#39406,#33602,#39408,.T.); +#39406 = VERTEX_POINT('',#39407); +#39407 = CARTESIAN_POINT('',(9.000000214576,-2.635,0.799997854233)); +#39408 = LINE('',#39409,#39410); +#39409 = CARTESIAN_POINT('',(9.000000214576,-2.635,0.799997854233)); +#39410 = VECTOR('',#39411,1.); +#39411 = DIRECTION('',(0.,-1.,0.)); +#39412 = ORIENTED_EDGE('',*,*,#39413,.F.); +#39413 = EDGE_CURVE('',#39375,#39406,#39414,.T.); +#39414 = LINE('',#39415,#39416); +#39415 = CARTESIAN_POINT('',(9.000000023842,-2.635,-2.14576734264E-06)); +#39416 = VECTOR('',#39417,1.); +#39417 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39418 = PLANE('',#39419); +#39419 = AXIS2_PLACEMENT_3D('',#39420,#39421,#39422); +#39420 = CARTESIAN_POINT('',(9.000000023842,-2.635,-2.14576734264E-06)); +#39421 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39422 = DIRECTION('',(0.,1.,0.)); +#39423 = ADVANCED_FACE('',(#39424),#39436,.F.); +#39424 = FACE_BOUND('',#39425,.F.); +#39425 = EDGE_LOOP('',(#39426,#39427,#39428,#39429,#39435)); +#39426 = ORIENTED_EDGE('',*,*,#33555,.F.); +#39427 = ORIENTED_EDGE('',*,*,#33563,.F.); +#39428 = ORIENTED_EDGE('',*,*,#36627,.T.); +#39429 = ORIENTED_EDGE('',*,*,#39430,.F.); +#39430 = EDGE_CURVE('',#33649,#36610,#39431,.T.); +#39431 = LINE('',#39432,#39433); +#39432 = CARTESIAN_POINT('',(-9.,-3.355,0.)); +#39433 = VECTOR('',#39434,1.); +#39434 = DIRECTION('',(0.,0.,1.)); +#39435 = ORIENTED_EDGE('',*,*,#33657,.F.); +#39436 = PLANE('',#39437); +#39437 = AXIS2_PLACEMENT_3D('',#39438,#39439,#39440); +#39438 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#39439 = DIRECTION('',(1.,0.,0.)); +#39440 = DIRECTION('',(0.,-1.,0.)); +#39441 = ADVANCED_FACE('',(#39442),#39469,.F.); +#39442 = FACE_BOUND('',#39443,.F.); +#39443 = EDGE_LOOP('',(#39444,#39452,#39460,#39466,#39467,#39468)); +#39444 = ORIENTED_EDGE('',*,*,#39445,.T.); +#39445 = EDGE_CURVE('',#33683,#39446,#39448,.T.); +#39446 = VERTEX_POINT('',#39447); +#39447 = CARTESIAN_POINT('',(9.000000023842,-3.355,-2.145767343E-06)); +#39448 = LINE('',#39449,#39450); +#39449 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#39450 = VECTOR('',#39451,1.); +#39451 = DIRECTION('',(0.,-1.,0.)); +#39452 = ORIENTED_EDGE('',*,*,#39453,.T.); +#39453 = EDGE_CURVE('',#39446,#39454,#39456,.T.); +#39454 = VERTEX_POINT('',#39455); +#39455 = CARTESIAN_POINT('',(9.000000214576,-3.355,0.799997854233)); +#39456 = LINE('',#39457,#39458); +#39457 = CARTESIAN_POINT('',(9.000000023842,-3.355,-2.14576734264E-06)); +#39458 = VECTOR('',#39459,1.); +#39459 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39460 = ORIENTED_EDGE('',*,*,#39461,.F.); +#39461 = EDGE_CURVE('',#33617,#39454,#39462,.T.); +#39462 = LINE('',#39463,#39464); +#39463 = CARTESIAN_POINT('',(9.000000214576,-3.18,0.799997854233)); +#39464 = VECTOR('',#39465,1.); +#39465 = DIRECTION('',(0.,-1.,0.)); +#39466 = ORIENTED_EDGE('',*,*,#33624,.T.); +#39467 = ORIENTED_EDGE('',*,*,#33632,.T.); +#39468 = ORIENTED_EDGE('',*,*,#33692,.F.); +#39469 = PLANE('',#39470); +#39470 = AXIS2_PLACEMENT_3D('',#39471,#39472,#39473); +#39471 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#39472 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39473 = DIRECTION('',(0.,1.,0.)); +#39474 = ADVANCED_FACE('',(#39475),#39486,.F.); +#39475 = FACE_BOUND('',#39476,.F.); +#39476 = EDGE_LOOP('',(#39477,#39478,#39479,#39480)); +#39477 = ORIENTED_EDGE('',*,*,#33646,.T.); +#39478 = ORIENTED_EDGE('',*,*,#39430,.T.); +#39479 = ORIENTED_EDGE('',*,*,#36607,.F.); +#39480 = ORIENTED_EDGE('',*,*,#39481,.F.); +#39481 = EDGE_CURVE('',#33647,#36608,#39482,.T.); +#39482 = LINE('',#39483,#39484); +#39483 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#39484 = VECTOR('',#39485,1.); +#39485 = DIRECTION('',(0.,0.,1.)); +#39486 = CYLINDRICAL_SURFACE('',#39487,0.275); +#39487 = AXIS2_PLACEMENT_3D('',#39488,#39489,#39490); +#39488 = CARTESIAN_POINT('',(-9.,-3.63,0.)); +#39489 = DIRECTION('',(-0.,-0.,-1.)); +#39490 = DIRECTION('',(1.,0.,0.)); +#39491 = ADVANCED_FACE('',(#39492),#39499,.F.); +#39492 = FACE_BOUND('',#39493,.F.); +#39493 = EDGE_LOOP('',(#39494,#39495,#39496,#39497,#39498)); +#39494 = ORIENTED_EDGE('',*,*,#39481,.T.); +#39495 = ORIENTED_EDGE('',*,*,#36618,.T.); +#39496 = ORIENTED_EDGE('',*,*,#33779,.T.); +#39497 = ORIENTED_EDGE('',*,*,#33787,.T.); +#39498 = ORIENTED_EDGE('',*,*,#33668,.F.); +#39499 = PLANE('',#39500); +#39500 = AXIS2_PLACEMENT_3D('',#39501,#39502,#39503); +#39501 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#39502 = DIRECTION('',(1.,0.,0.)); +#39503 = DIRECTION('',(0.,-1.,0.)); +#39504 = ADVANCED_FACE('',(#39505),#39526,.F.); +#39505 = FACE_BOUND('',#39506,.F.); +#39506 = EDGE_LOOP('',(#39507,#39516,#39517,#39518,#39519,#39520)); +#39507 = ORIENTED_EDGE('',*,*,#39508,.T.); +#39508 = EDGE_CURVE('',#39509,#39446,#39511,.T.); +#39509 = VERTEX_POINT('',#39510); +#39510 = CARTESIAN_POINT('',(9.000000023842,-3.905,-2.145767343E-06)); +#39511 = CIRCLE('',#39512,0.275); +#39512 = AXIS2_PLACEMENT_3D('',#39513,#39514,#39515); +#39513 = CARTESIAN_POINT('',(9.000000023842,-3.63,-2.14576734264E-06)); +#39514 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#39515 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39516 = ORIENTED_EDGE('',*,*,#39445,.F.); +#39517 = ORIENTED_EDGE('',*,*,#33682,.T.); +#39518 = ORIENTED_EDGE('',*,*,#33714,.T.); +#39519 = ORIENTED_EDGE('',*,*,#33738,.T.); +#39520 = ORIENTED_EDGE('',*,*,#39521,.F.); +#39521 = EDGE_CURVE('',#39509,#33739,#39522,.T.); +#39522 = LINE('',#39523,#39524); +#39523 = CARTESIAN_POINT('',(9.000000023842,-3.905,-2.14576734264E-06)); +#39524 = VECTOR('',#39525,1.); +#39525 = DIRECTION('',(0.,-1.,0.)); +#39526 = PLANE('',#39527); +#39527 = AXIS2_PLACEMENT_3D('',#39528,#39529,#39530); +#39528 = CARTESIAN_POINT('',(8.571261919915,-3.63,-2.04354820701E-06)); +#39529 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39530 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#39531 = ADVANCED_FACE('',(#39532),#39552,.F.); +#39532 = FACE_BOUND('',#39533,.F.); +#39533 = EDGE_LOOP('',(#39534,#39535,#39536,#39537,#39538,#39546)); +#39534 = ORIENTED_EDGE('',*,*,#39521,.T.); +#39535 = ORIENTED_EDGE('',*,*,#33749,.T.); +#39536 = ORIENTED_EDGE('',*,*,#33802,.F.); +#39537 = ORIENTED_EDGE('',*,*,#33810,.F.); +#39538 = ORIENTED_EDGE('',*,*,#39539,.F.); +#39539 = EDGE_CURVE('',#39540,#33811,#39542,.T.); +#39540 = VERTEX_POINT('',#39541); +#39541 = CARTESIAN_POINT('',(9.000000214576,-3.905,0.799997854233)); +#39542 = LINE('',#39543,#39544); +#39543 = CARTESIAN_POINT('',(9.000000214576,-3.905,0.799997854233)); +#39544 = VECTOR('',#39545,1.); +#39545 = DIRECTION('',(0.,-1.,0.)); +#39546 = ORIENTED_EDGE('',*,*,#39547,.F.); +#39547 = EDGE_CURVE('',#39509,#39540,#39548,.T.); +#39548 = LINE('',#39549,#39550); +#39549 = CARTESIAN_POINT('',(9.000000023842,-3.905,-2.14576734264E-06)); +#39550 = VECTOR('',#39551,1.); +#39551 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39552 = PLANE('',#39553); +#39553 = AXIS2_PLACEMENT_3D('',#39554,#39555,#39556); +#39554 = CARTESIAN_POINT('',(9.000000023842,-3.905,-2.14576734264E-06)); +#39555 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39556 = DIRECTION('',(0.,1.,0.)); +#39557 = ADVANCED_FACE('',(#39558),#39570,.F.); +#39558 = FACE_BOUND('',#39559,.F.); +#39559 = EDGE_LOOP('',(#39560,#39561,#39562,#39563,#39569)); +#39560 = ORIENTED_EDGE('',*,*,#33764,.F.); +#39561 = ORIENTED_EDGE('',*,*,#33772,.F.); +#39562 = ORIENTED_EDGE('',*,*,#36726,.T.); +#39563 = ORIENTED_EDGE('',*,*,#39564,.F.); +#39564 = EDGE_CURVE('',#33858,#36709,#39565,.T.); +#39565 = LINE('',#39566,#39567); +#39566 = CARTESIAN_POINT('',(-9.,-4.625,0.)); +#39567 = VECTOR('',#39568,1.); +#39568 = DIRECTION('',(0.,0.,1.)); +#39569 = ORIENTED_EDGE('',*,*,#33866,.F.); +#39570 = PLANE('',#39571); +#39571 = AXIS2_PLACEMENT_3D('',#39572,#39573,#39574); +#39572 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#39573 = DIRECTION('',(1.,0.,0.)); +#39574 = DIRECTION('',(0.,-1.,0.)); +#39575 = ADVANCED_FACE('',(#39576),#39603,.F.); +#39576 = FACE_BOUND('',#39577,.F.); +#39577 = EDGE_LOOP('',(#39578,#39586,#39594,#39600,#39601,#39602)); +#39578 = ORIENTED_EDGE('',*,*,#39579,.T.); +#39579 = EDGE_CURVE('',#33892,#39580,#39582,.T.); +#39580 = VERTEX_POINT('',#39581); +#39581 = CARTESIAN_POINT('',(9.000000023842,-4.625,-2.145767343E-06)); +#39582 = LINE('',#39583,#39584); +#39583 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#39584 = VECTOR('',#39585,1.); +#39585 = DIRECTION('',(0.,-1.,0.)); +#39586 = ORIENTED_EDGE('',*,*,#39587,.T.); +#39587 = EDGE_CURVE('',#39580,#39588,#39590,.T.); +#39588 = VERTEX_POINT('',#39589); +#39589 = CARTESIAN_POINT('',(9.000000214576,-4.625,0.799997854233)); +#39590 = LINE('',#39591,#39592); +#39591 = CARTESIAN_POINT('',(9.000000023842,-4.625,-2.14576734264E-06)); +#39592 = VECTOR('',#39593,1.); +#39593 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39594 = ORIENTED_EDGE('',*,*,#39595,.F.); +#39595 = EDGE_CURVE('',#33826,#39588,#39596,.T.); +#39596 = LINE('',#39597,#39598); +#39597 = CARTESIAN_POINT('',(9.000000214576,-4.45,0.799997854233)); +#39598 = VECTOR('',#39599,1.); +#39599 = DIRECTION('',(0.,-1.,0.)); +#39600 = ORIENTED_EDGE('',*,*,#33833,.T.); +#39601 = ORIENTED_EDGE('',*,*,#33841,.T.); +#39602 = ORIENTED_EDGE('',*,*,#33901,.F.); +#39603 = PLANE('',#39604); +#39604 = AXIS2_PLACEMENT_3D('',#39605,#39606,#39607); +#39605 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#39606 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39607 = DIRECTION('',(0.,1.,0.)); +#39608 = ADVANCED_FACE('',(#39609),#39620,.F.); +#39609 = FACE_BOUND('',#39610,.F.); +#39610 = EDGE_LOOP('',(#39611,#39612,#39613,#39614)); +#39611 = ORIENTED_EDGE('',*,*,#33855,.T.); +#39612 = ORIENTED_EDGE('',*,*,#39564,.T.); +#39613 = ORIENTED_EDGE('',*,*,#36706,.F.); +#39614 = ORIENTED_EDGE('',*,*,#39615,.F.); +#39615 = EDGE_CURVE('',#33856,#36707,#39616,.T.); +#39616 = LINE('',#39617,#39618); +#39617 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#39618 = VECTOR('',#39619,1.); +#39619 = DIRECTION('',(0.,0.,1.)); +#39620 = CYLINDRICAL_SURFACE('',#39621,0.275); +#39621 = AXIS2_PLACEMENT_3D('',#39622,#39623,#39624); +#39622 = CARTESIAN_POINT('',(-9.,-4.9,0.)); +#39623 = DIRECTION('',(-0.,-0.,-1.)); +#39624 = DIRECTION('',(1.,0.,0.)); +#39625 = ADVANCED_FACE('',(#39626),#39633,.F.); +#39626 = FACE_BOUND('',#39627,.F.); +#39627 = EDGE_LOOP('',(#39628,#39629,#39630,#39631,#39632)); +#39628 = ORIENTED_EDGE('',*,*,#39615,.T.); +#39629 = ORIENTED_EDGE('',*,*,#36717,.T.); +#39630 = ORIENTED_EDGE('',*,*,#33988,.T.); +#39631 = ORIENTED_EDGE('',*,*,#33996,.T.); +#39632 = ORIENTED_EDGE('',*,*,#33877,.F.); +#39633 = PLANE('',#39634); +#39634 = AXIS2_PLACEMENT_3D('',#39635,#39636,#39637); +#39635 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#39636 = DIRECTION('',(1.,0.,0.)); +#39637 = DIRECTION('',(0.,-1.,0.)); +#39638 = ADVANCED_FACE('',(#39639),#39660,.F.); +#39639 = FACE_BOUND('',#39640,.F.); +#39640 = EDGE_LOOP('',(#39641,#39650,#39651,#39652,#39653,#39654)); +#39641 = ORIENTED_EDGE('',*,*,#39642,.T.); +#39642 = EDGE_CURVE('',#39643,#39580,#39645,.T.); +#39643 = VERTEX_POINT('',#39644); +#39644 = CARTESIAN_POINT('',(9.000000023842,-5.175,-2.145767343E-06)); +#39645 = CIRCLE('',#39646,0.275); +#39646 = AXIS2_PLACEMENT_3D('',#39647,#39648,#39649); +#39647 = CARTESIAN_POINT('',(9.000000023842,-4.9,-2.14576734264E-06)); +#39648 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#39649 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39650 = ORIENTED_EDGE('',*,*,#39579,.F.); +#39651 = ORIENTED_EDGE('',*,*,#33891,.T.); +#39652 = ORIENTED_EDGE('',*,*,#33923,.T.); +#39653 = ORIENTED_EDGE('',*,*,#33947,.T.); +#39654 = ORIENTED_EDGE('',*,*,#39655,.F.); +#39655 = EDGE_CURVE('',#39643,#33948,#39656,.T.); +#39656 = LINE('',#39657,#39658); +#39657 = CARTESIAN_POINT('',(9.000000023842,-5.175,-2.14576734264E-06)); +#39658 = VECTOR('',#39659,1.); +#39659 = DIRECTION('',(0.,-1.,0.)); +#39660 = PLANE('',#39661); +#39661 = AXIS2_PLACEMENT_3D('',#39662,#39663,#39664); +#39662 = CARTESIAN_POINT('',(8.571261919915,-4.9,-2.04354820701E-06)); +#39663 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39664 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#39665 = ADVANCED_FACE('',(#39666),#39686,.F.); +#39666 = FACE_BOUND('',#39667,.F.); +#39667 = EDGE_LOOP('',(#39668,#39669,#39670,#39671,#39672,#39680)); +#39668 = ORIENTED_EDGE('',*,*,#39655,.T.); +#39669 = ORIENTED_EDGE('',*,*,#33958,.T.); +#39670 = ORIENTED_EDGE('',*,*,#34011,.F.); +#39671 = ORIENTED_EDGE('',*,*,#34019,.F.); +#39672 = ORIENTED_EDGE('',*,*,#39673,.F.); +#39673 = EDGE_CURVE('',#39674,#34020,#39676,.T.); +#39674 = VERTEX_POINT('',#39675); +#39675 = CARTESIAN_POINT('',(9.000000214576,-5.175,0.799997854233)); +#39676 = LINE('',#39677,#39678); +#39677 = CARTESIAN_POINT('',(9.000000214576,-5.175,0.799997854233)); +#39678 = VECTOR('',#39679,1.); +#39679 = DIRECTION('',(0.,-1.,0.)); +#39680 = ORIENTED_EDGE('',*,*,#39681,.F.); +#39681 = EDGE_CURVE('',#39643,#39674,#39682,.T.); +#39682 = LINE('',#39683,#39684); +#39683 = CARTESIAN_POINT('',(9.000000023842,-5.175,-2.14576734264E-06)); +#39684 = VECTOR('',#39685,1.); +#39685 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39686 = PLANE('',#39687); +#39687 = AXIS2_PLACEMENT_3D('',#39688,#39689,#39690); +#39688 = CARTESIAN_POINT('',(9.000000023842,-5.175,-2.14576734264E-06)); +#39689 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39690 = DIRECTION('',(0.,1.,0.)); +#39691 = ADVANCED_FACE('',(#39692),#39704,.F.); +#39692 = FACE_BOUND('',#39693,.F.); +#39693 = EDGE_LOOP('',(#39694,#39695,#39696,#39697,#39703)); +#39694 = ORIENTED_EDGE('',*,*,#33973,.F.); +#39695 = ORIENTED_EDGE('',*,*,#33981,.F.); +#39696 = ORIENTED_EDGE('',*,*,#36825,.T.); +#39697 = ORIENTED_EDGE('',*,*,#39698,.F.); +#39698 = EDGE_CURVE('',#34067,#36808,#39699,.T.); +#39699 = LINE('',#39700,#39701); +#39700 = CARTESIAN_POINT('',(-9.,-5.895,0.)); +#39701 = VECTOR('',#39702,1.); +#39702 = DIRECTION('',(0.,0.,1.)); +#39703 = ORIENTED_EDGE('',*,*,#34075,.F.); +#39704 = PLANE('',#39705); +#39705 = AXIS2_PLACEMENT_3D('',#39706,#39707,#39708); +#39706 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#39707 = DIRECTION('',(1.,0.,0.)); +#39708 = DIRECTION('',(0.,-1.,0.)); +#39709 = ADVANCED_FACE('',(#39710),#39737,.F.); +#39710 = FACE_BOUND('',#39711,.F.); +#39711 = EDGE_LOOP('',(#39712,#39720,#39728,#39734,#39735,#39736)); +#39712 = ORIENTED_EDGE('',*,*,#39713,.T.); +#39713 = EDGE_CURVE('',#34101,#39714,#39716,.T.); +#39714 = VERTEX_POINT('',#39715); +#39715 = CARTESIAN_POINT('',(9.000000023842,-5.895,-2.145767343E-06)); +#39716 = LINE('',#39717,#39718); +#39717 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#39718 = VECTOR('',#39719,1.); +#39719 = DIRECTION('',(0.,-1.,0.)); +#39720 = ORIENTED_EDGE('',*,*,#39721,.T.); +#39721 = EDGE_CURVE('',#39714,#39722,#39724,.T.); +#39722 = VERTEX_POINT('',#39723); +#39723 = CARTESIAN_POINT('',(9.000000214576,-5.895,0.799997854233)); +#39724 = LINE('',#39725,#39726); +#39725 = CARTESIAN_POINT('',(9.000000023842,-5.895,-2.14576734264E-06)); +#39726 = VECTOR('',#39727,1.); +#39727 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39728 = ORIENTED_EDGE('',*,*,#39729,.F.); +#39729 = EDGE_CURVE('',#34035,#39722,#39730,.T.); +#39730 = LINE('',#39731,#39732); +#39731 = CARTESIAN_POINT('',(9.000000214576,-5.72,0.799997854233)); +#39732 = VECTOR('',#39733,1.); +#39733 = DIRECTION('',(0.,-1.,0.)); +#39734 = ORIENTED_EDGE('',*,*,#34042,.T.); +#39735 = ORIENTED_EDGE('',*,*,#34050,.T.); +#39736 = ORIENTED_EDGE('',*,*,#34110,.F.); +#39737 = PLANE('',#39738); +#39738 = AXIS2_PLACEMENT_3D('',#39739,#39740,#39741); +#39739 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#39740 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39741 = DIRECTION('',(0.,1.,0.)); +#39742 = ADVANCED_FACE('',(#39743),#39754,.F.); +#39743 = FACE_BOUND('',#39744,.F.); +#39744 = EDGE_LOOP('',(#39745,#39746,#39747,#39748)); +#39745 = ORIENTED_EDGE('',*,*,#34064,.T.); +#39746 = ORIENTED_EDGE('',*,*,#39698,.T.); +#39747 = ORIENTED_EDGE('',*,*,#36805,.F.); +#39748 = ORIENTED_EDGE('',*,*,#39749,.F.); +#39749 = EDGE_CURVE('',#34065,#36806,#39750,.T.); +#39750 = LINE('',#39751,#39752); +#39751 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#39752 = VECTOR('',#39753,1.); +#39753 = DIRECTION('',(0.,0.,1.)); +#39754 = CYLINDRICAL_SURFACE('',#39755,0.275); +#39755 = AXIS2_PLACEMENT_3D('',#39756,#39757,#39758); +#39756 = CARTESIAN_POINT('',(-9.,-6.17,0.)); +#39757 = DIRECTION('',(-0.,-0.,-1.)); +#39758 = DIRECTION('',(1.,0.,0.)); +#39759 = ADVANCED_FACE('',(#39760),#39767,.F.); +#39760 = FACE_BOUND('',#39761,.F.); +#39761 = EDGE_LOOP('',(#39762,#39763,#39764,#39765,#39766)); +#39762 = ORIENTED_EDGE('',*,*,#39749,.T.); +#39763 = ORIENTED_EDGE('',*,*,#36816,.T.); +#39764 = ORIENTED_EDGE('',*,*,#34197,.T.); +#39765 = ORIENTED_EDGE('',*,*,#34205,.T.); +#39766 = ORIENTED_EDGE('',*,*,#34086,.F.); +#39767 = PLANE('',#39768); +#39768 = AXIS2_PLACEMENT_3D('',#39769,#39770,#39771); +#39769 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#39770 = DIRECTION('',(1.,0.,0.)); +#39771 = DIRECTION('',(0.,-1.,0.)); +#39772 = ADVANCED_FACE('',(#39773),#39794,.F.); +#39773 = FACE_BOUND('',#39774,.F.); +#39774 = EDGE_LOOP('',(#39775,#39784,#39785,#39786,#39787,#39788)); +#39775 = ORIENTED_EDGE('',*,*,#39776,.T.); +#39776 = EDGE_CURVE('',#39777,#39714,#39779,.T.); +#39777 = VERTEX_POINT('',#39778); +#39778 = CARTESIAN_POINT('',(9.000000023842,-6.445,-2.145767343E-06)); +#39779 = CIRCLE('',#39780,0.275); +#39780 = AXIS2_PLACEMENT_3D('',#39781,#39782,#39783); +#39781 = CARTESIAN_POINT('',(9.000000023842,-6.17,-2.14576734264E-06)); +#39782 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#39783 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39784 = ORIENTED_EDGE('',*,*,#39713,.F.); +#39785 = ORIENTED_EDGE('',*,*,#34100,.T.); +#39786 = ORIENTED_EDGE('',*,*,#34132,.T.); +#39787 = ORIENTED_EDGE('',*,*,#34156,.T.); +#39788 = ORIENTED_EDGE('',*,*,#39789,.F.); +#39789 = EDGE_CURVE('',#39777,#34157,#39790,.T.); +#39790 = LINE('',#39791,#39792); +#39791 = CARTESIAN_POINT('',(9.000000023842,-6.445,-2.14576734264E-06)); +#39792 = VECTOR('',#39793,1.); +#39793 = DIRECTION('',(0.,-1.,0.)); +#39794 = PLANE('',#39795); +#39795 = AXIS2_PLACEMENT_3D('',#39796,#39797,#39798); +#39796 = CARTESIAN_POINT('',(8.571261919915,-6.17,-2.04354820701E-06)); +#39797 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39798 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#39799 = ADVANCED_FACE('',(#39800),#39820,.F.); +#39800 = FACE_BOUND('',#39801,.F.); +#39801 = EDGE_LOOP('',(#39802,#39803,#39804,#39805,#39806,#39814)); +#39802 = ORIENTED_EDGE('',*,*,#39789,.T.); +#39803 = ORIENTED_EDGE('',*,*,#34167,.T.); +#39804 = ORIENTED_EDGE('',*,*,#34220,.F.); +#39805 = ORIENTED_EDGE('',*,*,#34228,.F.); +#39806 = ORIENTED_EDGE('',*,*,#39807,.F.); +#39807 = EDGE_CURVE('',#39808,#34229,#39810,.T.); +#39808 = VERTEX_POINT('',#39809); +#39809 = CARTESIAN_POINT('',(9.000000214576,-6.445,0.799997854233)); +#39810 = LINE('',#39811,#39812); +#39811 = CARTESIAN_POINT('',(9.000000214576,-6.445,0.799997854233)); +#39812 = VECTOR('',#39813,1.); +#39813 = DIRECTION('',(0.,-1.,0.)); +#39814 = ORIENTED_EDGE('',*,*,#39815,.F.); +#39815 = EDGE_CURVE('',#39777,#39808,#39816,.T.); +#39816 = LINE('',#39817,#39818); +#39817 = CARTESIAN_POINT('',(9.000000023842,-6.445,-2.14576734264E-06)); +#39818 = VECTOR('',#39819,1.); +#39819 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39820 = PLANE('',#39821); +#39821 = AXIS2_PLACEMENT_3D('',#39822,#39823,#39824); +#39822 = CARTESIAN_POINT('',(9.000000023842,-6.445,-2.14576734264E-06)); +#39823 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39824 = DIRECTION('',(0.,1.,0.)); +#39825 = ADVANCED_FACE('',(#39826),#39838,.F.); +#39826 = FACE_BOUND('',#39827,.F.); +#39827 = EDGE_LOOP('',(#39828,#39829,#39830,#39831,#39837)); +#39828 = ORIENTED_EDGE('',*,*,#34182,.F.); +#39829 = ORIENTED_EDGE('',*,*,#34190,.F.); +#39830 = ORIENTED_EDGE('',*,*,#36924,.T.); +#39831 = ORIENTED_EDGE('',*,*,#39832,.F.); +#39832 = EDGE_CURVE('',#34276,#36907,#39833,.T.); +#39833 = LINE('',#39834,#39835); +#39834 = CARTESIAN_POINT('',(-9.,-7.165,0.)); +#39835 = VECTOR('',#39836,1.); +#39836 = DIRECTION('',(0.,0.,1.)); +#39837 = ORIENTED_EDGE('',*,*,#34284,.F.); +#39838 = PLANE('',#39839); +#39839 = AXIS2_PLACEMENT_3D('',#39840,#39841,#39842); +#39840 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#39841 = DIRECTION('',(1.,0.,0.)); +#39842 = DIRECTION('',(0.,-1.,0.)); +#39843 = ADVANCED_FACE('',(#39844),#39871,.F.); +#39844 = FACE_BOUND('',#39845,.F.); +#39845 = EDGE_LOOP('',(#39846,#39854,#39862,#39868,#39869,#39870)); +#39846 = ORIENTED_EDGE('',*,*,#39847,.T.); +#39847 = EDGE_CURVE('',#34310,#39848,#39850,.T.); +#39848 = VERTEX_POINT('',#39849); +#39849 = CARTESIAN_POINT('',(9.000000023842,-7.165,-2.145767343E-06)); +#39850 = LINE('',#39851,#39852); +#39851 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#39852 = VECTOR('',#39853,1.); +#39853 = DIRECTION('',(0.,-1.,0.)); +#39854 = ORIENTED_EDGE('',*,*,#39855,.T.); +#39855 = EDGE_CURVE('',#39848,#39856,#39858,.T.); +#39856 = VERTEX_POINT('',#39857); +#39857 = CARTESIAN_POINT('',(9.000000214576,-7.165,0.799997854233)); +#39858 = LINE('',#39859,#39860); +#39859 = CARTESIAN_POINT('',(9.000000023842,-7.165,-2.14576734264E-06)); +#39860 = VECTOR('',#39861,1.); +#39861 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39862 = ORIENTED_EDGE('',*,*,#39863,.F.); +#39863 = EDGE_CURVE('',#34244,#39856,#39864,.T.); +#39864 = LINE('',#39865,#39866); +#39865 = CARTESIAN_POINT('',(9.000000214576,-6.99,0.799997854233)); +#39866 = VECTOR('',#39867,1.); +#39867 = DIRECTION('',(0.,-1.,0.)); +#39868 = ORIENTED_EDGE('',*,*,#34251,.T.); +#39869 = ORIENTED_EDGE('',*,*,#34259,.T.); +#39870 = ORIENTED_EDGE('',*,*,#34319,.F.); +#39871 = PLANE('',#39872); +#39872 = AXIS2_PLACEMENT_3D('',#39873,#39874,#39875); +#39873 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#39874 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39875 = DIRECTION('',(0.,1.,0.)); +#39876 = ADVANCED_FACE('',(#39877),#39888,.F.); +#39877 = FACE_BOUND('',#39878,.F.); +#39878 = EDGE_LOOP('',(#39879,#39880,#39881,#39882)); +#39879 = ORIENTED_EDGE('',*,*,#34273,.T.); +#39880 = ORIENTED_EDGE('',*,*,#39832,.T.); +#39881 = ORIENTED_EDGE('',*,*,#36904,.F.); +#39882 = ORIENTED_EDGE('',*,*,#39883,.F.); +#39883 = EDGE_CURVE('',#34274,#36905,#39884,.T.); +#39884 = LINE('',#39885,#39886); +#39885 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#39886 = VECTOR('',#39887,1.); +#39887 = DIRECTION('',(0.,0.,1.)); +#39888 = CYLINDRICAL_SURFACE('',#39889,0.275); +#39889 = AXIS2_PLACEMENT_3D('',#39890,#39891,#39892); +#39890 = CARTESIAN_POINT('',(-9.,-7.44,0.)); +#39891 = DIRECTION('',(-0.,-0.,-1.)); +#39892 = DIRECTION('',(1.,0.,0.)); +#39893 = ADVANCED_FACE('',(#39894),#39901,.F.); +#39894 = FACE_BOUND('',#39895,.F.); +#39895 = EDGE_LOOP('',(#39896,#39897,#39898,#39899,#39900)); +#39896 = ORIENTED_EDGE('',*,*,#39883,.T.); +#39897 = ORIENTED_EDGE('',*,*,#36915,.T.); +#39898 = ORIENTED_EDGE('',*,*,#34406,.T.); +#39899 = ORIENTED_EDGE('',*,*,#34414,.T.); +#39900 = ORIENTED_EDGE('',*,*,#34295,.F.); +#39901 = PLANE('',#39902); +#39902 = AXIS2_PLACEMENT_3D('',#39903,#39904,#39905); +#39903 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#39904 = DIRECTION('',(1.,0.,0.)); +#39905 = DIRECTION('',(0.,-1.,0.)); +#39906 = ADVANCED_FACE('',(#39907),#39928,.F.); +#39907 = FACE_BOUND('',#39908,.F.); +#39908 = EDGE_LOOP('',(#39909,#39918,#39919,#39920,#39921,#39922)); +#39909 = ORIENTED_EDGE('',*,*,#39910,.T.); +#39910 = EDGE_CURVE('',#39911,#39848,#39913,.T.); +#39911 = VERTEX_POINT('',#39912); +#39912 = CARTESIAN_POINT('',(9.000000023842,-7.715,-2.145767343E-06)); +#39913 = CIRCLE('',#39914,0.275); +#39914 = AXIS2_PLACEMENT_3D('',#39915,#39916,#39917); +#39915 = CARTESIAN_POINT('',(9.000000023842,-7.44,-2.14576734264E-06)); +#39916 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#39917 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39918 = ORIENTED_EDGE('',*,*,#39847,.F.); +#39919 = ORIENTED_EDGE('',*,*,#34309,.T.); +#39920 = ORIENTED_EDGE('',*,*,#34341,.T.); +#39921 = ORIENTED_EDGE('',*,*,#34365,.T.); +#39922 = ORIENTED_EDGE('',*,*,#39923,.F.); +#39923 = EDGE_CURVE('',#39911,#34366,#39924,.T.); +#39924 = LINE('',#39925,#39926); +#39925 = CARTESIAN_POINT('',(9.000000023842,-7.715,-2.14576734264E-06)); +#39926 = VECTOR('',#39927,1.); +#39927 = DIRECTION('',(0.,-1.,0.)); +#39928 = PLANE('',#39929); +#39929 = AXIS2_PLACEMENT_3D('',#39930,#39931,#39932); +#39930 = CARTESIAN_POINT('',(8.571261919915,-7.44,-2.04354820701E-06)); +#39931 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39932 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#39933 = ADVANCED_FACE('',(#39934),#39954,.F.); +#39934 = FACE_BOUND('',#39935,.F.); +#39935 = EDGE_LOOP('',(#39936,#39937,#39938,#39939,#39940,#39948)); +#39936 = ORIENTED_EDGE('',*,*,#39923,.T.); +#39937 = ORIENTED_EDGE('',*,*,#34376,.T.); +#39938 = ORIENTED_EDGE('',*,*,#34429,.F.); +#39939 = ORIENTED_EDGE('',*,*,#34437,.F.); +#39940 = ORIENTED_EDGE('',*,*,#39941,.F.); +#39941 = EDGE_CURVE('',#39942,#34438,#39944,.T.); +#39942 = VERTEX_POINT('',#39943); +#39943 = CARTESIAN_POINT('',(9.000000214576,-7.715,0.799997854233)); +#39944 = LINE('',#39945,#39946); +#39945 = CARTESIAN_POINT('',(9.000000214576,-7.715,0.799997854233)); +#39946 = VECTOR('',#39947,1.); +#39947 = DIRECTION('',(0.,-1.,0.)); +#39948 = ORIENTED_EDGE('',*,*,#39949,.F.); +#39949 = EDGE_CURVE('',#39911,#39942,#39950,.T.); +#39950 = LINE('',#39951,#39952); +#39951 = CARTESIAN_POINT('',(9.000000023842,-7.715,-2.14576734264E-06)); +#39952 = VECTOR('',#39953,1.); +#39953 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39954 = PLANE('',#39955); +#39955 = AXIS2_PLACEMENT_3D('',#39956,#39957,#39958); +#39956 = CARTESIAN_POINT('',(9.000000023842,-7.715,-2.14576734264E-06)); +#39957 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#39958 = DIRECTION('',(0.,1.,0.)); +#39959 = ADVANCED_FACE('',(#39960),#39972,.F.); +#39960 = FACE_BOUND('',#39961,.F.); +#39961 = EDGE_LOOP('',(#39962,#39963,#39964,#39965,#39971)); +#39962 = ORIENTED_EDGE('',*,*,#34391,.F.); +#39963 = ORIENTED_EDGE('',*,*,#34399,.F.); +#39964 = ORIENTED_EDGE('',*,*,#37023,.T.); +#39965 = ORIENTED_EDGE('',*,*,#39966,.F.); +#39966 = EDGE_CURVE('',#34485,#37006,#39967,.T.); +#39967 = LINE('',#39968,#39969); +#39968 = CARTESIAN_POINT('',(-9.,-8.435,0.)); +#39969 = VECTOR('',#39970,1.); +#39970 = DIRECTION('',(0.,0.,1.)); +#39971 = ORIENTED_EDGE('',*,*,#34493,.F.); +#39972 = PLANE('',#39973); +#39973 = AXIS2_PLACEMENT_3D('',#39974,#39975,#39976); +#39974 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#39975 = DIRECTION('',(1.,0.,0.)); +#39976 = DIRECTION('',(0.,-1.,0.)); +#39977 = ADVANCED_FACE('',(#39978),#40005,.F.); +#39978 = FACE_BOUND('',#39979,.F.); +#39979 = EDGE_LOOP('',(#39980,#39988,#39996,#40002,#40003,#40004)); +#39980 = ORIENTED_EDGE('',*,*,#39981,.T.); +#39981 = EDGE_CURVE('',#34519,#39982,#39984,.T.); +#39982 = VERTEX_POINT('',#39983); +#39983 = CARTESIAN_POINT('',(9.000000023842,-8.435,-2.145767343E-06)); +#39984 = LINE('',#39985,#39986); +#39985 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#39986 = VECTOR('',#39987,1.); +#39987 = DIRECTION('',(0.,-1.,0.)); +#39988 = ORIENTED_EDGE('',*,*,#39989,.T.); +#39989 = EDGE_CURVE('',#39982,#39990,#39992,.T.); +#39990 = VERTEX_POINT('',#39991); +#39991 = CARTESIAN_POINT('',(9.000000214576,-8.435,0.799997854233)); +#39992 = LINE('',#39993,#39994); +#39993 = CARTESIAN_POINT('',(9.000000023842,-8.435,-2.14576734264E-06)); +#39994 = VECTOR('',#39995,1.); +#39995 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#39996 = ORIENTED_EDGE('',*,*,#39997,.F.); +#39997 = EDGE_CURVE('',#34453,#39990,#39998,.T.); +#39998 = LINE('',#39999,#40000); +#39999 = CARTESIAN_POINT('',(9.000000214576,-8.26,0.799997854233)); +#40000 = VECTOR('',#40001,1.); +#40001 = DIRECTION('',(0.,-1.,0.)); +#40002 = ORIENTED_EDGE('',*,*,#34460,.T.); +#40003 = ORIENTED_EDGE('',*,*,#34468,.T.); +#40004 = ORIENTED_EDGE('',*,*,#34528,.F.); +#40005 = PLANE('',#40006); +#40006 = AXIS2_PLACEMENT_3D('',#40007,#40008,#40009); +#40007 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#40008 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40009 = DIRECTION('',(0.,1.,0.)); +#40010 = ADVANCED_FACE('',(#40011),#40022,.F.); +#40011 = FACE_BOUND('',#40012,.F.); +#40012 = EDGE_LOOP('',(#40013,#40014,#40015,#40016)); +#40013 = ORIENTED_EDGE('',*,*,#34482,.T.); +#40014 = ORIENTED_EDGE('',*,*,#39966,.T.); +#40015 = ORIENTED_EDGE('',*,*,#37003,.F.); +#40016 = ORIENTED_EDGE('',*,*,#40017,.F.); +#40017 = EDGE_CURVE('',#34483,#37004,#40018,.T.); +#40018 = LINE('',#40019,#40020); +#40019 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#40020 = VECTOR('',#40021,1.); +#40021 = DIRECTION('',(0.,0.,1.)); +#40022 = CYLINDRICAL_SURFACE('',#40023,0.275); +#40023 = AXIS2_PLACEMENT_3D('',#40024,#40025,#40026); +#40024 = CARTESIAN_POINT('',(-9.,-8.71,0.)); +#40025 = DIRECTION('',(-0.,-0.,-1.)); +#40026 = DIRECTION('',(1.,0.,0.)); +#40027 = ADVANCED_FACE('',(#40028),#40035,.F.); +#40028 = FACE_BOUND('',#40029,.F.); +#40029 = EDGE_LOOP('',(#40030,#40031,#40032,#40033,#40034)); +#40030 = ORIENTED_EDGE('',*,*,#40017,.T.); +#40031 = ORIENTED_EDGE('',*,*,#37014,.T.); +#40032 = ORIENTED_EDGE('',*,*,#34615,.T.); +#40033 = ORIENTED_EDGE('',*,*,#34623,.T.); +#40034 = ORIENTED_EDGE('',*,*,#34504,.F.); +#40035 = PLANE('',#40036); +#40036 = AXIS2_PLACEMENT_3D('',#40037,#40038,#40039); +#40037 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#40038 = DIRECTION('',(1.,0.,0.)); +#40039 = DIRECTION('',(0.,-1.,0.)); +#40040 = ADVANCED_FACE('',(#40041),#40062,.F.); +#40041 = FACE_BOUND('',#40042,.F.); +#40042 = EDGE_LOOP('',(#40043,#40052,#40053,#40054,#40055,#40056)); +#40043 = ORIENTED_EDGE('',*,*,#40044,.T.); +#40044 = EDGE_CURVE('',#40045,#39982,#40047,.T.); +#40045 = VERTEX_POINT('',#40046); +#40046 = CARTESIAN_POINT('',(9.000000023842,-8.985,-2.145767343E-06)); +#40047 = CIRCLE('',#40048,0.275); +#40048 = AXIS2_PLACEMENT_3D('',#40049,#40050,#40051); +#40049 = CARTESIAN_POINT('',(9.000000023842,-8.71,-2.14576734264E-06)); +#40050 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40051 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40052 = ORIENTED_EDGE('',*,*,#39981,.F.); +#40053 = ORIENTED_EDGE('',*,*,#34518,.T.); +#40054 = ORIENTED_EDGE('',*,*,#34550,.T.); +#40055 = ORIENTED_EDGE('',*,*,#34574,.T.); +#40056 = ORIENTED_EDGE('',*,*,#40057,.F.); +#40057 = EDGE_CURVE('',#40045,#34575,#40058,.T.); +#40058 = LINE('',#40059,#40060); +#40059 = CARTESIAN_POINT('',(9.000000023842,-8.985,-2.14576734264E-06)); +#40060 = VECTOR('',#40061,1.); +#40061 = DIRECTION('',(0.,-1.,0.)); +#40062 = PLANE('',#40063); +#40063 = AXIS2_PLACEMENT_3D('',#40064,#40065,#40066); +#40064 = CARTESIAN_POINT('',(8.571261919915,-8.71,-2.04354820701E-06)); +#40065 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40066 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40067 = ADVANCED_FACE('',(#40068),#40088,.F.); +#40068 = FACE_BOUND('',#40069,.F.); +#40069 = EDGE_LOOP('',(#40070,#40071,#40072,#40073,#40074,#40082)); +#40070 = ORIENTED_EDGE('',*,*,#40057,.T.); +#40071 = ORIENTED_EDGE('',*,*,#34585,.T.); +#40072 = ORIENTED_EDGE('',*,*,#34638,.F.); +#40073 = ORIENTED_EDGE('',*,*,#34646,.F.); +#40074 = ORIENTED_EDGE('',*,*,#40075,.F.); +#40075 = EDGE_CURVE('',#40076,#34647,#40078,.T.); +#40076 = VERTEX_POINT('',#40077); +#40077 = CARTESIAN_POINT('',(9.000000214576,-8.985,0.799997854233)); +#40078 = LINE('',#40079,#40080); +#40079 = CARTESIAN_POINT('',(9.000000214576,-8.985,0.799997854233)); +#40080 = VECTOR('',#40081,1.); +#40081 = DIRECTION('',(0.,-1.,0.)); +#40082 = ORIENTED_EDGE('',*,*,#40083,.F.); +#40083 = EDGE_CURVE('',#40045,#40076,#40084,.T.); +#40084 = LINE('',#40085,#40086); +#40085 = CARTESIAN_POINT('',(9.000000023842,-8.985,-2.14576734264E-06)); +#40086 = VECTOR('',#40087,1.); +#40087 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40088 = PLANE('',#40089); +#40089 = AXIS2_PLACEMENT_3D('',#40090,#40091,#40092); +#40090 = CARTESIAN_POINT('',(9.000000023842,-8.985,-2.14576734264E-06)); +#40091 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40092 = DIRECTION('',(0.,1.,0.)); +#40093 = ADVANCED_FACE('',(#40094),#40106,.F.); +#40094 = FACE_BOUND('',#40095,.F.); +#40095 = EDGE_LOOP('',(#40096,#40097,#40098,#40099,#40105)); +#40096 = ORIENTED_EDGE('',*,*,#34600,.F.); +#40097 = ORIENTED_EDGE('',*,*,#34608,.F.); +#40098 = ORIENTED_EDGE('',*,*,#37122,.T.); +#40099 = ORIENTED_EDGE('',*,*,#40100,.F.); +#40100 = EDGE_CURVE('',#34694,#37105,#40101,.T.); +#40101 = LINE('',#40102,#40103); +#40102 = CARTESIAN_POINT('',(-9.,-9.705,0.)); +#40103 = VECTOR('',#40104,1.); +#40104 = DIRECTION('',(0.,0.,1.)); +#40105 = ORIENTED_EDGE('',*,*,#34702,.F.); +#40106 = PLANE('',#40107); +#40107 = AXIS2_PLACEMENT_3D('',#40108,#40109,#40110); +#40108 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#40109 = DIRECTION('',(1.,0.,0.)); +#40110 = DIRECTION('',(0.,-1.,0.)); +#40111 = ADVANCED_FACE('',(#40112),#40139,.F.); +#40112 = FACE_BOUND('',#40113,.F.); +#40113 = EDGE_LOOP('',(#40114,#40122,#40130,#40136,#40137,#40138)); +#40114 = ORIENTED_EDGE('',*,*,#40115,.T.); +#40115 = EDGE_CURVE('',#34728,#40116,#40118,.T.); +#40116 = VERTEX_POINT('',#40117); +#40117 = CARTESIAN_POINT('',(9.000000023842,-9.705,-2.145767343E-06)); +#40118 = LINE('',#40119,#40120); +#40119 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#40120 = VECTOR('',#40121,1.); +#40121 = DIRECTION('',(0.,-1.,0.)); +#40122 = ORIENTED_EDGE('',*,*,#40123,.T.); +#40123 = EDGE_CURVE('',#40116,#40124,#40126,.T.); +#40124 = VERTEX_POINT('',#40125); +#40125 = CARTESIAN_POINT('',(9.000000214576,-9.705,0.799997854233)); +#40126 = LINE('',#40127,#40128); +#40127 = CARTESIAN_POINT('',(9.000000023842,-9.705,-2.14576734264E-06)); +#40128 = VECTOR('',#40129,1.); +#40129 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40130 = ORIENTED_EDGE('',*,*,#40131,.F.); +#40131 = EDGE_CURVE('',#34662,#40124,#40132,.T.); +#40132 = LINE('',#40133,#40134); +#40133 = CARTESIAN_POINT('',(9.000000214576,-9.53,0.799997854233)); +#40134 = VECTOR('',#40135,1.); +#40135 = DIRECTION('',(0.,-1.,0.)); +#40136 = ORIENTED_EDGE('',*,*,#34669,.T.); +#40137 = ORIENTED_EDGE('',*,*,#34677,.T.); +#40138 = ORIENTED_EDGE('',*,*,#34737,.F.); +#40139 = PLANE('',#40140); +#40140 = AXIS2_PLACEMENT_3D('',#40141,#40142,#40143); +#40141 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#40142 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40143 = DIRECTION('',(0.,1.,0.)); +#40144 = ADVANCED_FACE('',(#40145),#40156,.F.); +#40145 = FACE_BOUND('',#40146,.F.); +#40146 = EDGE_LOOP('',(#40147,#40148,#40149,#40150)); +#40147 = ORIENTED_EDGE('',*,*,#34691,.T.); +#40148 = ORIENTED_EDGE('',*,*,#40100,.T.); +#40149 = ORIENTED_EDGE('',*,*,#37102,.F.); +#40150 = ORIENTED_EDGE('',*,*,#40151,.F.); +#40151 = EDGE_CURVE('',#34692,#37103,#40152,.T.); +#40152 = LINE('',#40153,#40154); +#40153 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#40154 = VECTOR('',#40155,1.); +#40155 = DIRECTION('',(0.,0.,1.)); +#40156 = CYLINDRICAL_SURFACE('',#40157,0.275); +#40157 = AXIS2_PLACEMENT_3D('',#40158,#40159,#40160); +#40158 = CARTESIAN_POINT('',(-9.,-9.98,0.)); +#40159 = DIRECTION('',(-0.,-0.,-1.)); +#40160 = DIRECTION('',(1.,0.,0.)); +#40161 = ADVANCED_FACE('',(#40162),#40169,.F.); +#40162 = FACE_BOUND('',#40163,.F.); +#40163 = EDGE_LOOP('',(#40164,#40165,#40166,#40167,#40168)); +#40164 = ORIENTED_EDGE('',*,*,#40151,.T.); +#40165 = ORIENTED_EDGE('',*,*,#37113,.T.); +#40166 = ORIENTED_EDGE('',*,*,#34824,.T.); +#40167 = ORIENTED_EDGE('',*,*,#34832,.T.); +#40168 = ORIENTED_EDGE('',*,*,#34713,.F.); +#40169 = PLANE('',#40170); +#40170 = AXIS2_PLACEMENT_3D('',#40171,#40172,#40173); +#40171 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#40172 = DIRECTION('',(1.,0.,0.)); +#40173 = DIRECTION('',(0.,-1.,0.)); +#40174 = ADVANCED_FACE('',(#40175),#40196,.F.); +#40175 = FACE_BOUND('',#40176,.F.); +#40176 = EDGE_LOOP('',(#40177,#40186,#40187,#40188,#40189,#40190)); +#40177 = ORIENTED_EDGE('',*,*,#40178,.T.); +#40178 = EDGE_CURVE('',#40179,#40116,#40181,.T.); +#40179 = VERTEX_POINT('',#40180); +#40180 = CARTESIAN_POINT('',(9.000000023842,-10.255,-2.145767343E-06)); +#40181 = CIRCLE('',#40182,0.275); +#40182 = AXIS2_PLACEMENT_3D('',#40183,#40184,#40185); +#40183 = CARTESIAN_POINT('',(9.000000023842,-9.98,-2.14576734264E-06)); +#40184 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40185 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40186 = ORIENTED_EDGE('',*,*,#40115,.F.); +#40187 = ORIENTED_EDGE('',*,*,#34727,.T.); +#40188 = ORIENTED_EDGE('',*,*,#34759,.T.); +#40189 = ORIENTED_EDGE('',*,*,#34783,.T.); +#40190 = ORIENTED_EDGE('',*,*,#40191,.F.); +#40191 = EDGE_CURVE('',#40179,#34784,#40192,.T.); +#40192 = LINE('',#40193,#40194); +#40193 = CARTESIAN_POINT('',(9.000000023842,-10.255,-2.14576734264E-06) + ); +#40194 = VECTOR('',#40195,1.); +#40195 = DIRECTION('',(0.,-1.,0.)); +#40196 = PLANE('',#40197); +#40197 = AXIS2_PLACEMENT_3D('',#40198,#40199,#40200); +#40198 = CARTESIAN_POINT('',(8.571261919915,-9.98,-2.04354820701E-06)); +#40199 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40200 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40201 = ADVANCED_FACE('',(#40202),#40222,.F.); +#40202 = FACE_BOUND('',#40203,.F.); +#40203 = EDGE_LOOP('',(#40204,#40205,#40206,#40207,#40208,#40216)); +#40204 = ORIENTED_EDGE('',*,*,#40191,.T.); +#40205 = ORIENTED_EDGE('',*,*,#34794,.T.); +#40206 = ORIENTED_EDGE('',*,*,#34847,.F.); +#40207 = ORIENTED_EDGE('',*,*,#34855,.F.); +#40208 = ORIENTED_EDGE('',*,*,#40209,.F.); +#40209 = EDGE_CURVE('',#40210,#34856,#40212,.T.); +#40210 = VERTEX_POINT('',#40211); +#40211 = CARTESIAN_POINT('',(9.000000214576,-10.255,0.799997854233)); +#40212 = LINE('',#40213,#40214); +#40213 = CARTESIAN_POINT('',(9.000000214576,-10.255,0.799997854233)); +#40214 = VECTOR('',#40215,1.); +#40215 = DIRECTION('',(0.,-1.,0.)); +#40216 = ORIENTED_EDGE('',*,*,#40217,.F.); +#40217 = EDGE_CURVE('',#40179,#40210,#40218,.T.); +#40218 = LINE('',#40219,#40220); +#40219 = CARTESIAN_POINT('',(9.000000023842,-10.255,-2.14576734264E-06) + ); +#40220 = VECTOR('',#40221,1.); +#40221 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40222 = PLANE('',#40223); +#40223 = AXIS2_PLACEMENT_3D('',#40224,#40225,#40226); +#40224 = CARTESIAN_POINT('',(9.000000023842,-10.255,-2.14576734264E-06) + ); +#40225 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40226 = DIRECTION('',(0.,1.,0.)); +#40227 = ADVANCED_FACE('',(#40228),#40240,.F.); +#40228 = FACE_BOUND('',#40229,.F.); +#40229 = EDGE_LOOP('',(#40230,#40231,#40232,#40233,#40239)); +#40230 = ORIENTED_EDGE('',*,*,#34809,.F.); +#40231 = ORIENTED_EDGE('',*,*,#34817,.F.); +#40232 = ORIENTED_EDGE('',*,*,#37221,.T.); +#40233 = ORIENTED_EDGE('',*,*,#40234,.F.); +#40234 = EDGE_CURVE('',#34903,#37204,#40235,.T.); +#40235 = LINE('',#40236,#40237); +#40236 = CARTESIAN_POINT('',(-9.,-10.975,0.)); +#40237 = VECTOR('',#40238,1.); +#40238 = DIRECTION('',(0.,0.,1.)); +#40239 = ORIENTED_EDGE('',*,*,#34911,.F.); +#40240 = PLANE('',#40241); +#40241 = AXIS2_PLACEMENT_3D('',#40242,#40243,#40244); +#40242 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#40243 = DIRECTION('',(1.,0.,0.)); +#40244 = DIRECTION('',(0.,-1.,0.)); +#40245 = ADVANCED_FACE('',(#40246),#40273,.F.); +#40246 = FACE_BOUND('',#40247,.F.); +#40247 = EDGE_LOOP('',(#40248,#40256,#40264,#40270,#40271,#40272)); +#40248 = ORIENTED_EDGE('',*,*,#40249,.T.); +#40249 = EDGE_CURVE('',#34937,#40250,#40252,.T.); +#40250 = VERTEX_POINT('',#40251); +#40251 = CARTESIAN_POINT('',(9.000000023842,-10.975,-2.145767343E-06)); +#40252 = LINE('',#40253,#40254); +#40253 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#40254 = VECTOR('',#40255,1.); +#40255 = DIRECTION('',(0.,-1.,0.)); +#40256 = ORIENTED_EDGE('',*,*,#40257,.T.); +#40257 = EDGE_CURVE('',#40250,#40258,#40260,.T.); +#40258 = VERTEX_POINT('',#40259); +#40259 = CARTESIAN_POINT('',(9.000000214576,-10.975,0.799997854233)); +#40260 = LINE('',#40261,#40262); +#40261 = CARTESIAN_POINT('',(9.000000023842,-10.975,-2.14576734264E-06) + ); +#40262 = VECTOR('',#40263,1.); +#40263 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40264 = ORIENTED_EDGE('',*,*,#40265,.F.); +#40265 = EDGE_CURVE('',#34871,#40258,#40266,.T.); +#40266 = LINE('',#40267,#40268); +#40267 = CARTESIAN_POINT('',(9.000000214576,-10.8,0.799997854233)); +#40268 = VECTOR('',#40269,1.); +#40269 = DIRECTION('',(0.,-1.,0.)); +#40270 = ORIENTED_EDGE('',*,*,#34878,.T.); +#40271 = ORIENTED_EDGE('',*,*,#34886,.T.); +#40272 = ORIENTED_EDGE('',*,*,#34946,.F.); +#40273 = PLANE('',#40274); +#40274 = AXIS2_PLACEMENT_3D('',#40275,#40276,#40277); +#40275 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#40276 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40277 = DIRECTION('',(0.,1.,0.)); +#40278 = ADVANCED_FACE('',(#40279),#40290,.F.); +#40279 = FACE_BOUND('',#40280,.F.); +#40280 = EDGE_LOOP('',(#40281,#40282,#40283,#40284)); +#40281 = ORIENTED_EDGE('',*,*,#34900,.T.); +#40282 = ORIENTED_EDGE('',*,*,#40234,.T.); +#40283 = ORIENTED_EDGE('',*,*,#37201,.F.); +#40284 = ORIENTED_EDGE('',*,*,#40285,.F.); +#40285 = EDGE_CURVE('',#34901,#37202,#40286,.T.); +#40286 = LINE('',#40287,#40288); +#40287 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#40288 = VECTOR('',#40289,1.); +#40289 = DIRECTION('',(0.,0.,1.)); +#40290 = CYLINDRICAL_SURFACE('',#40291,0.275); +#40291 = AXIS2_PLACEMENT_3D('',#40292,#40293,#40294); +#40292 = CARTESIAN_POINT('',(-9.,-11.25,0.)); +#40293 = DIRECTION('',(-0.,-0.,-1.)); +#40294 = DIRECTION('',(1.,0.,0.)); +#40295 = ADVANCED_FACE('',(#40296),#40303,.F.); +#40296 = FACE_BOUND('',#40297,.F.); +#40297 = EDGE_LOOP('',(#40298,#40299,#40300,#40301,#40302)); +#40298 = ORIENTED_EDGE('',*,*,#40285,.T.); +#40299 = ORIENTED_EDGE('',*,*,#37212,.T.); +#40300 = ORIENTED_EDGE('',*,*,#35025,.T.); +#40301 = ORIENTED_EDGE('',*,*,#35033,.T.); +#40302 = ORIENTED_EDGE('',*,*,#34922,.F.); +#40303 = PLANE('',#40304); +#40304 = AXIS2_PLACEMENT_3D('',#40305,#40306,#40307); +#40305 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#40306 = DIRECTION('',(1.,0.,0.)); +#40307 = DIRECTION('',(0.,-1.,0.)); +#40308 = ADVANCED_FACE('',(#40309),#40330,.F.); +#40309 = FACE_BOUND('',#40310,.F.); +#40310 = EDGE_LOOP('',(#40311,#40320,#40321,#40322,#40323,#40324)); +#40311 = ORIENTED_EDGE('',*,*,#40312,.T.); +#40312 = EDGE_CURVE('',#40313,#40250,#40315,.T.); +#40313 = VERTEX_POINT('',#40314); +#40314 = CARTESIAN_POINT('',(9.000000023842,-11.525,-2.145767343E-06)); +#40315 = CIRCLE('',#40316,0.275); +#40316 = AXIS2_PLACEMENT_3D('',#40317,#40318,#40319); +#40317 = CARTESIAN_POINT('',(9.000000023842,-11.25,-2.14576734264E-06)); +#40318 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40319 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40320 = ORIENTED_EDGE('',*,*,#40249,.F.); +#40321 = ORIENTED_EDGE('',*,*,#34936,.T.); +#40322 = ORIENTED_EDGE('',*,*,#34968,.T.); +#40323 = ORIENTED_EDGE('',*,*,#34992,.T.); +#40324 = ORIENTED_EDGE('',*,*,#40325,.F.); +#40325 = EDGE_CURVE('',#40313,#34993,#40326,.T.); +#40326 = LINE('',#40327,#40328); +#40327 = CARTESIAN_POINT('',(9.000000023842,-11.525,-2.14576734264E-06) + ); +#40328 = VECTOR('',#40329,1.); +#40329 = DIRECTION('',(0.,-1.,0.)); +#40330 = PLANE('',#40331); +#40331 = AXIS2_PLACEMENT_3D('',#40332,#40333,#40334); +#40332 = CARTESIAN_POINT('',(8.571261919915,-11.25,-2.04354820701E-06)); +#40333 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40334 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40335 = ADVANCED_FACE('',(#40336),#40356,.F.); +#40336 = FACE_BOUND('',#40337,.F.); +#40337 = EDGE_LOOP('',(#40338,#40339,#40340,#40341,#40342,#40350)); +#40338 = ORIENTED_EDGE('',*,*,#40325,.T.); +#40339 = ORIENTED_EDGE('',*,*,#35003,.T.); +#40340 = ORIENTED_EDGE('',*,*,#35048,.F.); +#40341 = ORIENTED_EDGE('',*,*,#35056,.F.); +#40342 = ORIENTED_EDGE('',*,*,#40343,.F.); +#40343 = EDGE_CURVE('',#40344,#35057,#40346,.T.); +#40344 = VERTEX_POINT('',#40345); +#40345 = CARTESIAN_POINT('',(9.000000214576,-11.525,0.799997854233)); +#40346 = LINE('',#40347,#40348); +#40347 = CARTESIAN_POINT('',(9.000000214576,-11.525,0.799997854233)); +#40348 = VECTOR('',#40349,1.); +#40349 = DIRECTION('',(0.,-1.,0.)); +#40350 = ORIENTED_EDGE('',*,*,#40351,.F.); +#40351 = EDGE_CURVE('',#40313,#40344,#40352,.T.); +#40352 = LINE('',#40353,#40354); +#40353 = CARTESIAN_POINT('',(9.000000023842,-11.525,-2.14576734264E-06) + ); +#40354 = VECTOR('',#40355,1.); +#40355 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40356 = PLANE('',#40357); +#40357 = AXIS2_PLACEMENT_3D('',#40358,#40359,#40360); +#40358 = CARTESIAN_POINT('',(9.000000023842,-11.525,-2.14576734264E-06) + ); +#40359 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40360 = DIRECTION('',(0.,1.,0.)); +#40361 = ADVANCED_FACE('',(#40362),#40374,.F.); +#40362 = FACE_BOUND('',#40363,.F.); +#40363 = EDGE_LOOP('',(#40364,#40365,#40366,#40367,#40373)); +#40364 = ORIENTED_EDGE('',*,*,#35086,.F.); +#40365 = ORIENTED_EDGE('',*,*,#35094,.F.); +#40366 = ORIENTED_EDGE('',*,*,#37320,.T.); +#40367 = ORIENTED_EDGE('',*,*,#40368,.F.); +#40368 = EDGE_CURVE('',#35138,#37303,#40369,.T.); +#40369 = LINE('',#40370,#40371); +#40370 = CARTESIAN_POINT('',(-5.99,-12.75,0.)); +#40371 = VECTOR('',#40372,1.); +#40372 = DIRECTION('',(0.,0.,1.)); +#40373 = ORIENTED_EDGE('',*,*,#35146,.F.); +#40374 = PLANE('',#40375); +#40375 = AXIS2_PLACEMENT_3D('',#40376,#40377,#40378); +#40376 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#40377 = DIRECTION('',(0.,1.,0.)); +#40378 = DIRECTION('',(1.,0.,0.)); +#40379 = ADVANCED_FACE('',(#40380),#40392,.F.); +#40380 = FACE_BOUND('',#40381,.F.); +#40381 = EDGE_LOOP('',(#40382,#40388,#40389,#40390,#40391)); +#40382 = ORIENTED_EDGE('',*,*,#40383,.T.); +#40383 = EDGE_CURVE('',#35172,#37335,#40384,.T.); +#40384 = LINE('',#40385,#40386); +#40385 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#40386 = VECTOR('',#40387,1.); +#40387 = DIRECTION('',(0.,0.,1.)); +#40388 = ORIENTED_EDGE('',*,*,#37345,.T.); +#40389 = ORIENTED_EDGE('',*,*,#35113,.T.); +#40390 = ORIENTED_EDGE('',*,*,#35121,.T.); +#40391 = ORIENTED_EDGE('',*,*,#35193,.F.); +#40392 = PLANE('',#40393); +#40393 = AXIS2_PLACEMENT_3D('',#40394,#40395,#40396); +#40394 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#40395 = DIRECTION('',(0.,1.,0.)); +#40396 = DIRECTION('',(1.,0.,0.)); +#40397 = ADVANCED_FACE('',(#40398),#40409,.F.); +#40398 = FACE_BOUND('',#40399,.F.); +#40399 = EDGE_LOOP('',(#40400,#40401,#40402,#40403)); +#40400 = ORIENTED_EDGE('',*,*,#35135,.T.); +#40401 = ORIENTED_EDGE('',*,*,#40368,.T.); +#40402 = ORIENTED_EDGE('',*,*,#37300,.F.); +#40403 = ORIENTED_EDGE('',*,*,#40404,.F.); +#40404 = EDGE_CURVE('',#35136,#37301,#40405,.T.); +#40405 = LINE('',#40406,#40407); +#40406 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#40407 = VECTOR('',#40408,1.); +#40408 = DIRECTION('',(0.,0.,1.)); +#40409 = CYLINDRICAL_SURFACE('',#40410,0.275); +#40410 = AXIS2_PLACEMENT_3D('',#40411,#40412,#40413); +#40411 = CARTESIAN_POINT('',(-5.715,-12.75,0.)); +#40412 = DIRECTION('',(0.,-0.,-1.)); +#40413 = DIRECTION('',(0.,1.,0.)); +#40414 = ADVANCED_FACE('',(#40415),#40422,.F.); +#40415 = FACE_BOUND('',#40416,.F.); +#40416 = EDGE_LOOP('',(#40417,#40418,#40419,#40420,#40421)); +#40417 = ORIENTED_EDGE('',*,*,#40404,.T.); +#40418 = ORIENTED_EDGE('',*,*,#37311,.T.); +#40419 = ORIENTED_EDGE('',*,*,#35223,.T.); +#40420 = ORIENTED_EDGE('',*,*,#35231,.T.); +#40421 = ORIENTED_EDGE('',*,*,#35157,.F.); +#40422 = PLANE('',#40423); +#40423 = AXIS2_PLACEMENT_3D('',#40424,#40425,#40426); +#40424 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#40425 = DIRECTION('',(0.,1.,0.)); +#40426 = DIRECTION('',(1.,0.,0.)); +#40427 = ADVANCED_FACE('',(#40428),#40439,.F.); +#40428 = FACE_BOUND('',#40429,.F.); +#40429 = EDGE_LOOP('',(#40430,#40431,#40437,#40438)); +#40430 = ORIENTED_EDGE('',*,*,#35171,.T.); +#40431 = ORIENTED_EDGE('',*,*,#40432,.T.); +#40432 = EDGE_CURVE('',#35174,#37337,#40433,.T.); +#40433 = LINE('',#40434,#40435); +#40434 = CARTESIAN_POINT('',(5.44,-12.75,0.)); +#40435 = VECTOR('',#40436,1.); +#40436 = DIRECTION('',(0.,0.,1.)); +#40437 = ORIENTED_EDGE('',*,*,#37334,.F.); +#40438 = ORIENTED_EDGE('',*,*,#40383,.F.); +#40439 = CYLINDRICAL_SURFACE('',#40440,0.275); +#40440 = AXIS2_PLACEMENT_3D('',#40441,#40442,#40443); +#40441 = CARTESIAN_POINT('',(5.715,-12.75,0.)); +#40442 = DIRECTION('',(0.,-0.,-1.)); +#40443 = DIRECTION('',(0.,1.,0.)); +#40444 = ADVANCED_FACE('',(#40445),#40452,.F.); +#40445 = FACE_BOUND('',#40446,.F.); +#40446 = EDGE_LOOP('',(#40447,#40448,#40449,#40450,#40451)); +#40447 = ORIENTED_EDGE('',*,*,#35246,.F.); +#40448 = ORIENTED_EDGE('',*,*,#35254,.F.); +#40449 = ORIENTED_EDGE('',*,*,#37354,.T.); +#40450 = ORIENTED_EDGE('',*,*,#40432,.F.); +#40451 = ORIENTED_EDGE('',*,*,#35182,.F.); +#40452 = PLANE('',#40453); +#40453 = AXIS2_PLACEMENT_3D('',#40454,#40455,#40456); +#40454 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#40455 = DIRECTION('',(0.,1.,0.)); +#40456 = DIRECTION('',(1.,0.,0.)); +#40457 = ADVANCED_FACE('',(#40458),#40470,.F.); +#40458 = FACE_BOUND('',#40459,.F.); +#40459 = EDGE_LOOP('',(#40460,#40461,#40462,#40463,#40469)); +#40460 = ORIENTED_EDGE('',*,*,#35208,.F.); +#40461 = ORIENTED_EDGE('',*,*,#35216,.F.); +#40462 = ORIENTED_EDGE('',*,*,#37388,.T.); +#40463 = ORIENTED_EDGE('',*,*,#40464,.F.); +#40464 = EDGE_CURVE('',#35286,#37371,#40465,.T.); +#40465 = LINE('',#40466,#40467); +#40466 = CARTESIAN_POINT('',(-4.72,-12.75,0.)); +#40467 = VECTOR('',#40468,1.); +#40468 = DIRECTION('',(0.,0.,1.)); +#40469 = ORIENTED_EDGE('',*,*,#35294,.F.); +#40470 = PLANE('',#40471); +#40471 = AXIS2_PLACEMENT_3D('',#40472,#40473,#40474); +#40472 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#40473 = DIRECTION('',(0.,1.,0.)); +#40474 = DIRECTION('',(1.,0.,0.)); +#40475 = ADVANCED_FACE('',(#40476),#40488,.F.); +#40476 = FACE_BOUND('',#40477,.F.); +#40477 = EDGE_LOOP('',(#40478,#40484,#40485,#40486,#40487)); +#40478 = ORIENTED_EDGE('',*,*,#40479,.T.); +#40479 = EDGE_CURVE('',#35320,#37403,#40480,.T.); +#40480 = LINE('',#40481,#40482); +#40481 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#40482 = VECTOR('',#40483,1.); +#40483 = DIRECTION('',(0.,0.,1.)); +#40484 = ORIENTED_EDGE('',*,*,#37413,.T.); +#40485 = ORIENTED_EDGE('',*,*,#35261,.T.); +#40486 = ORIENTED_EDGE('',*,*,#35269,.T.); +#40487 = ORIENTED_EDGE('',*,*,#35341,.F.); +#40488 = PLANE('',#40489); +#40489 = AXIS2_PLACEMENT_3D('',#40490,#40491,#40492); +#40490 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#40491 = DIRECTION('',(0.,1.,0.)); +#40492 = DIRECTION('',(1.,0.,0.)); +#40493 = ADVANCED_FACE('',(#40494),#40505,.F.); +#40494 = FACE_BOUND('',#40495,.F.); +#40495 = EDGE_LOOP('',(#40496,#40497,#40498,#40499)); +#40496 = ORIENTED_EDGE('',*,*,#35283,.T.); +#40497 = ORIENTED_EDGE('',*,*,#40464,.T.); +#40498 = ORIENTED_EDGE('',*,*,#37368,.F.); +#40499 = ORIENTED_EDGE('',*,*,#40500,.F.); +#40500 = EDGE_CURVE('',#35284,#37369,#40501,.T.); +#40501 = LINE('',#40502,#40503); +#40502 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#40503 = VECTOR('',#40504,1.); +#40504 = DIRECTION('',(0.,0.,1.)); +#40505 = CYLINDRICAL_SURFACE('',#40506,0.275); +#40506 = AXIS2_PLACEMENT_3D('',#40507,#40508,#40509); +#40507 = CARTESIAN_POINT('',(-4.445,-12.75,0.)); +#40508 = DIRECTION('',(0.,-0.,-1.)); +#40509 = DIRECTION('',(0.,1.,0.)); +#40510 = ADVANCED_FACE('',(#40511),#40518,.F.); +#40511 = FACE_BOUND('',#40512,.F.); +#40512 = EDGE_LOOP('',(#40513,#40514,#40515,#40516,#40517)); +#40513 = ORIENTED_EDGE('',*,*,#40500,.T.); +#40514 = ORIENTED_EDGE('',*,*,#37379,.T.); +#40515 = ORIENTED_EDGE('',*,*,#35371,.T.); +#40516 = ORIENTED_EDGE('',*,*,#35379,.T.); +#40517 = ORIENTED_EDGE('',*,*,#35305,.F.); +#40518 = PLANE('',#40519); +#40519 = AXIS2_PLACEMENT_3D('',#40520,#40521,#40522); +#40520 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#40521 = DIRECTION('',(0.,1.,0.)); +#40522 = DIRECTION('',(1.,0.,0.)); +#40523 = ADVANCED_FACE('',(#40524),#40535,.F.); +#40524 = FACE_BOUND('',#40525,.F.); +#40525 = EDGE_LOOP('',(#40526,#40527,#40533,#40534)); +#40526 = ORIENTED_EDGE('',*,*,#35319,.T.); +#40527 = ORIENTED_EDGE('',*,*,#40528,.T.); +#40528 = EDGE_CURVE('',#35322,#37405,#40529,.T.); +#40529 = LINE('',#40530,#40531); +#40530 = CARTESIAN_POINT('',(4.17,-12.75,0.)); +#40531 = VECTOR('',#40532,1.); +#40532 = DIRECTION('',(0.,0.,1.)); +#40533 = ORIENTED_EDGE('',*,*,#37402,.F.); +#40534 = ORIENTED_EDGE('',*,*,#40479,.F.); +#40535 = CYLINDRICAL_SURFACE('',#40536,0.275); +#40536 = AXIS2_PLACEMENT_3D('',#40537,#40538,#40539); +#40537 = CARTESIAN_POINT('',(4.445,-12.75,0.)); +#40538 = DIRECTION('',(0.,-0.,-1.)); +#40539 = DIRECTION('',(0.,1.,0.)); +#40540 = ADVANCED_FACE('',(#40541),#40548,.F.); +#40541 = FACE_BOUND('',#40542,.F.); +#40542 = EDGE_LOOP('',(#40543,#40544,#40545,#40546,#40547)); +#40543 = ORIENTED_EDGE('',*,*,#35394,.F.); +#40544 = ORIENTED_EDGE('',*,*,#35402,.F.); +#40545 = ORIENTED_EDGE('',*,*,#37422,.T.); +#40546 = ORIENTED_EDGE('',*,*,#40528,.F.); +#40547 = ORIENTED_EDGE('',*,*,#35330,.F.); +#40548 = PLANE('',#40549); +#40549 = AXIS2_PLACEMENT_3D('',#40550,#40551,#40552); +#40550 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#40551 = DIRECTION('',(0.,1.,0.)); +#40552 = DIRECTION('',(1.,0.,0.)); +#40553 = ADVANCED_FACE('',(#40554),#40566,.F.); +#40554 = FACE_BOUND('',#40555,.F.); +#40555 = EDGE_LOOP('',(#40556,#40557,#40558,#40559,#40565)); +#40556 = ORIENTED_EDGE('',*,*,#35356,.F.); +#40557 = ORIENTED_EDGE('',*,*,#35364,.F.); +#40558 = ORIENTED_EDGE('',*,*,#37456,.T.); +#40559 = ORIENTED_EDGE('',*,*,#40560,.F.); +#40560 = EDGE_CURVE('',#35434,#37439,#40561,.T.); +#40561 = LINE('',#40562,#40563); +#40562 = CARTESIAN_POINT('',(-3.45,-12.75,0.)); +#40563 = VECTOR('',#40564,1.); +#40564 = DIRECTION('',(0.,0.,1.)); +#40565 = ORIENTED_EDGE('',*,*,#35442,.F.); +#40566 = PLANE('',#40567); +#40567 = AXIS2_PLACEMENT_3D('',#40568,#40569,#40570); +#40568 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#40569 = DIRECTION('',(0.,1.,0.)); +#40570 = DIRECTION('',(1.,0.,0.)); +#40571 = ADVANCED_FACE('',(#40572),#40584,.F.); +#40572 = FACE_BOUND('',#40573,.F.); +#40573 = EDGE_LOOP('',(#40574,#40580,#40581,#40582,#40583)); +#40574 = ORIENTED_EDGE('',*,*,#40575,.T.); +#40575 = EDGE_CURVE('',#35468,#37471,#40576,.T.); +#40576 = LINE('',#40577,#40578); +#40577 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#40578 = VECTOR('',#40579,1.); +#40579 = DIRECTION('',(0.,0.,1.)); +#40580 = ORIENTED_EDGE('',*,*,#37481,.T.); +#40581 = ORIENTED_EDGE('',*,*,#35409,.T.); +#40582 = ORIENTED_EDGE('',*,*,#35417,.T.); +#40583 = ORIENTED_EDGE('',*,*,#35489,.F.); +#40584 = PLANE('',#40585); +#40585 = AXIS2_PLACEMENT_3D('',#40586,#40587,#40588); +#40586 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#40587 = DIRECTION('',(0.,1.,0.)); +#40588 = DIRECTION('',(1.,0.,0.)); +#40589 = ADVANCED_FACE('',(#40590),#40601,.F.); +#40590 = FACE_BOUND('',#40591,.F.); +#40591 = EDGE_LOOP('',(#40592,#40593,#40594,#40595)); +#40592 = ORIENTED_EDGE('',*,*,#35431,.T.); +#40593 = ORIENTED_EDGE('',*,*,#40560,.T.); +#40594 = ORIENTED_EDGE('',*,*,#37436,.F.); +#40595 = ORIENTED_EDGE('',*,*,#40596,.F.); +#40596 = EDGE_CURVE('',#35432,#37437,#40597,.T.); +#40597 = LINE('',#40598,#40599); +#40598 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#40599 = VECTOR('',#40600,1.); +#40600 = DIRECTION('',(0.,0.,1.)); +#40601 = CYLINDRICAL_SURFACE('',#40602,0.275); +#40602 = AXIS2_PLACEMENT_3D('',#40603,#40604,#40605); +#40603 = CARTESIAN_POINT('',(-3.175,-12.75,0.)); +#40604 = DIRECTION('',(0.,-0.,-1.)); +#40605 = DIRECTION('',(0.,1.,0.)); +#40606 = ADVANCED_FACE('',(#40607),#40614,.F.); +#40607 = FACE_BOUND('',#40608,.F.); +#40608 = EDGE_LOOP('',(#40609,#40610,#40611,#40612,#40613)); +#40609 = ORIENTED_EDGE('',*,*,#40596,.T.); +#40610 = ORIENTED_EDGE('',*,*,#37447,.T.); +#40611 = ORIENTED_EDGE('',*,*,#35519,.T.); +#40612 = ORIENTED_EDGE('',*,*,#35527,.T.); +#40613 = ORIENTED_EDGE('',*,*,#35453,.F.); +#40614 = PLANE('',#40615); +#40615 = AXIS2_PLACEMENT_3D('',#40616,#40617,#40618); +#40616 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#40617 = DIRECTION('',(0.,1.,0.)); +#40618 = DIRECTION('',(1.,0.,0.)); +#40619 = ADVANCED_FACE('',(#40620),#40631,.F.); +#40620 = FACE_BOUND('',#40621,.F.); +#40621 = EDGE_LOOP('',(#40622,#40623,#40629,#40630)); +#40622 = ORIENTED_EDGE('',*,*,#35467,.T.); +#40623 = ORIENTED_EDGE('',*,*,#40624,.T.); +#40624 = EDGE_CURVE('',#35470,#37473,#40625,.T.); +#40625 = LINE('',#40626,#40627); +#40626 = CARTESIAN_POINT('',(2.9,-12.75,0.)); +#40627 = VECTOR('',#40628,1.); +#40628 = DIRECTION('',(0.,0.,1.)); +#40629 = ORIENTED_EDGE('',*,*,#37470,.F.); +#40630 = ORIENTED_EDGE('',*,*,#40575,.F.); +#40631 = CYLINDRICAL_SURFACE('',#40632,0.275); +#40632 = AXIS2_PLACEMENT_3D('',#40633,#40634,#40635); +#40633 = CARTESIAN_POINT('',(3.175,-12.75,0.)); +#40634 = DIRECTION('',(0.,-0.,-1.)); +#40635 = DIRECTION('',(0.,1.,0.)); +#40636 = ADVANCED_FACE('',(#40637),#40644,.F.); +#40637 = FACE_BOUND('',#40638,.F.); +#40638 = EDGE_LOOP('',(#40639,#40640,#40641,#40642,#40643)); +#40639 = ORIENTED_EDGE('',*,*,#35542,.F.); +#40640 = ORIENTED_EDGE('',*,*,#35550,.F.); +#40641 = ORIENTED_EDGE('',*,*,#37490,.T.); +#40642 = ORIENTED_EDGE('',*,*,#40624,.F.); +#40643 = ORIENTED_EDGE('',*,*,#35478,.F.); +#40644 = PLANE('',#40645); +#40645 = AXIS2_PLACEMENT_3D('',#40646,#40647,#40648); +#40646 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#40647 = DIRECTION('',(0.,1.,0.)); +#40648 = DIRECTION('',(1.,0.,0.)); +#40649 = ADVANCED_FACE('',(#40650),#40662,.F.); +#40650 = FACE_BOUND('',#40651,.F.); +#40651 = EDGE_LOOP('',(#40652,#40653,#40654,#40655,#40661)); +#40652 = ORIENTED_EDGE('',*,*,#35504,.F.); +#40653 = ORIENTED_EDGE('',*,*,#35512,.F.); +#40654 = ORIENTED_EDGE('',*,*,#37524,.T.); +#40655 = ORIENTED_EDGE('',*,*,#40656,.F.); +#40656 = EDGE_CURVE('',#35582,#37507,#40657,.T.); +#40657 = LINE('',#40658,#40659); +#40658 = CARTESIAN_POINT('',(-2.18,-12.75,0.)); +#40659 = VECTOR('',#40660,1.); +#40660 = DIRECTION('',(0.,0.,1.)); +#40661 = ORIENTED_EDGE('',*,*,#35590,.F.); +#40662 = PLANE('',#40663); +#40663 = AXIS2_PLACEMENT_3D('',#40664,#40665,#40666); +#40664 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#40665 = DIRECTION('',(0.,1.,0.)); +#40666 = DIRECTION('',(1.,0.,0.)); +#40667 = ADVANCED_FACE('',(#40668),#40680,.F.); +#40668 = FACE_BOUND('',#40669,.F.); +#40669 = EDGE_LOOP('',(#40670,#40676,#40677,#40678,#40679)); +#40670 = ORIENTED_EDGE('',*,*,#40671,.T.); +#40671 = EDGE_CURVE('',#35616,#37539,#40672,.T.); +#40672 = LINE('',#40673,#40674); +#40673 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#40674 = VECTOR('',#40675,1.); +#40675 = DIRECTION('',(0.,0.,1.)); +#40676 = ORIENTED_EDGE('',*,*,#37549,.T.); +#40677 = ORIENTED_EDGE('',*,*,#35557,.T.); +#40678 = ORIENTED_EDGE('',*,*,#35565,.T.); +#40679 = ORIENTED_EDGE('',*,*,#35637,.F.); +#40680 = PLANE('',#40681); +#40681 = AXIS2_PLACEMENT_3D('',#40682,#40683,#40684); +#40682 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#40683 = DIRECTION('',(0.,1.,0.)); +#40684 = DIRECTION('',(1.,0.,0.)); +#40685 = ADVANCED_FACE('',(#40686),#40697,.F.); +#40686 = FACE_BOUND('',#40687,.F.); +#40687 = EDGE_LOOP('',(#40688,#40689,#40690,#40691)); +#40688 = ORIENTED_EDGE('',*,*,#35579,.T.); +#40689 = ORIENTED_EDGE('',*,*,#40656,.T.); +#40690 = ORIENTED_EDGE('',*,*,#37504,.F.); +#40691 = ORIENTED_EDGE('',*,*,#40692,.F.); +#40692 = EDGE_CURVE('',#35580,#37505,#40693,.T.); +#40693 = LINE('',#40694,#40695); +#40694 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#40695 = VECTOR('',#40696,1.); +#40696 = DIRECTION('',(0.,0.,1.)); +#40697 = CYLINDRICAL_SURFACE('',#40698,0.275); +#40698 = AXIS2_PLACEMENT_3D('',#40699,#40700,#40701); +#40699 = CARTESIAN_POINT('',(-1.905,-12.75,0.)); +#40700 = DIRECTION('',(0.,-0.,-1.)); +#40701 = DIRECTION('',(0.,1.,0.)); +#40702 = ADVANCED_FACE('',(#40703),#40710,.F.); +#40703 = FACE_BOUND('',#40704,.F.); +#40704 = EDGE_LOOP('',(#40705,#40706,#40707,#40708,#40709)); +#40705 = ORIENTED_EDGE('',*,*,#40692,.T.); +#40706 = ORIENTED_EDGE('',*,*,#37515,.T.); +#40707 = ORIENTED_EDGE('',*,*,#35667,.T.); +#40708 = ORIENTED_EDGE('',*,*,#35675,.T.); +#40709 = ORIENTED_EDGE('',*,*,#35601,.F.); +#40710 = PLANE('',#40711); +#40711 = AXIS2_PLACEMENT_3D('',#40712,#40713,#40714); +#40712 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#40713 = DIRECTION('',(0.,1.,0.)); +#40714 = DIRECTION('',(1.,0.,0.)); +#40715 = ADVANCED_FACE('',(#40716),#40727,.F.); +#40716 = FACE_BOUND('',#40717,.F.); +#40717 = EDGE_LOOP('',(#40718,#40719,#40725,#40726)); +#40718 = ORIENTED_EDGE('',*,*,#35615,.T.); +#40719 = ORIENTED_EDGE('',*,*,#40720,.T.); +#40720 = EDGE_CURVE('',#35618,#37541,#40721,.T.); +#40721 = LINE('',#40722,#40723); +#40722 = CARTESIAN_POINT('',(1.63,-12.75,0.)); +#40723 = VECTOR('',#40724,1.); +#40724 = DIRECTION('',(0.,0.,1.)); +#40725 = ORIENTED_EDGE('',*,*,#37538,.F.); +#40726 = ORIENTED_EDGE('',*,*,#40671,.F.); +#40727 = CYLINDRICAL_SURFACE('',#40728,0.275); +#40728 = AXIS2_PLACEMENT_3D('',#40729,#40730,#40731); +#40729 = CARTESIAN_POINT('',(1.905,-12.75,0.)); +#40730 = DIRECTION('',(0.,-0.,-1.)); +#40731 = DIRECTION('',(0.,1.,0.)); +#40732 = ADVANCED_FACE('',(#40733),#40740,.F.); +#40733 = FACE_BOUND('',#40734,.F.); +#40734 = EDGE_LOOP('',(#40735,#40736,#40737,#40738,#40739)); +#40735 = ORIENTED_EDGE('',*,*,#35690,.F.); +#40736 = ORIENTED_EDGE('',*,*,#35698,.F.); +#40737 = ORIENTED_EDGE('',*,*,#37558,.T.); +#40738 = ORIENTED_EDGE('',*,*,#40720,.F.); +#40739 = ORIENTED_EDGE('',*,*,#35626,.F.); +#40740 = PLANE('',#40741); +#40741 = AXIS2_PLACEMENT_3D('',#40742,#40743,#40744); +#40742 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#40743 = DIRECTION('',(0.,1.,0.)); +#40744 = DIRECTION('',(1.,0.,0.)); +#40745 = ADVANCED_FACE('',(#40746),#40758,.F.); +#40746 = FACE_BOUND('',#40747,.F.); +#40747 = EDGE_LOOP('',(#40748,#40749,#40750,#40751,#40757)); +#40748 = ORIENTED_EDGE('',*,*,#35652,.F.); +#40749 = ORIENTED_EDGE('',*,*,#35660,.F.); +#40750 = ORIENTED_EDGE('',*,*,#37592,.T.); +#40751 = ORIENTED_EDGE('',*,*,#40752,.F.); +#40752 = EDGE_CURVE('',#35730,#37575,#40753,.T.); +#40753 = LINE('',#40754,#40755); +#40754 = CARTESIAN_POINT('',(-0.91,-12.75,0.)); +#40755 = VECTOR('',#40756,1.); +#40756 = DIRECTION('',(0.,0.,1.)); +#40757 = ORIENTED_EDGE('',*,*,#35738,.F.); +#40758 = PLANE('',#40759); +#40759 = AXIS2_PLACEMENT_3D('',#40760,#40761,#40762); +#40760 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#40761 = DIRECTION('',(0.,1.,0.)); +#40762 = DIRECTION('',(1.,0.,0.)); +#40763 = ADVANCED_FACE('',(#40764),#40776,.F.); +#40764 = FACE_BOUND('',#40765,.F.); +#40765 = EDGE_LOOP('',(#40766,#40772,#40773,#40774,#40775)); +#40766 = ORIENTED_EDGE('',*,*,#40767,.T.); +#40767 = EDGE_CURVE('',#35764,#37607,#40768,.T.); +#40768 = LINE('',#40769,#40770); +#40769 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#40770 = VECTOR('',#40771,1.); +#40771 = DIRECTION('',(0.,0.,1.)); +#40772 = ORIENTED_EDGE('',*,*,#37617,.T.); +#40773 = ORIENTED_EDGE('',*,*,#35705,.T.); +#40774 = ORIENTED_EDGE('',*,*,#35713,.T.); +#40775 = ORIENTED_EDGE('',*,*,#35785,.F.); +#40776 = PLANE('',#40777); +#40777 = AXIS2_PLACEMENT_3D('',#40778,#40779,#40780); +#40778 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#40779 = DIRECTION('',(0.,1.,0.)); +#40780 = DIRECTION('',(1.,0.,0.)); +#40781 = ADVANCED_FACE('',(#40782),#40793,.F.); +#40782 = FACE_BOUND('',#40783,.F.); +#40783 = EDGE_LOOP('',(#40784,#40785,#40786,#40787)); +#40784 = ORIENTED_EDGE('',*,*,#35727,.T.); +#40785 = ORIENTED_EDGE('',*,*,#40752,.T.); +#40786 = ORIENTED_EDGE('',*,*,#37572,.F.); +#40787 = ORIENTED_EDGE('',*,*,#40788,.F.); +#40788 = EDGE_CURVE('',#35728,#37573,#40789,.T.); +#40789 = LINE('',#40790,#40791); +#40790 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#40791 = VECTOR('',#40792,1.); +#40792 = DIRECTION('',(0.,0.,1.)); +#40793 = CYLINDRICAL_SURFACE('',#40794,0.275); +#40794 = AXIS2_PLACEMENT_3D('',#40795,#40796,#40797); +#40795 = CARTESIAN_POINT('',(-0.635,-12.75,0.)); +#40796 = DIRECTION('',(0.,-0.,-1.)); +#40797 = DIRECTION('',(0.,1.,0.)); +#40798 = ADVANCED_FACE('',(#40799),#40806,.F.); +#40799 = FACE_BOUND('',#40800,.F.); +#40800 = EDGE_LOOP('',(#40801,#40802,#40803,#40804,#40805)); +#40801 = ORIENTED_EDGE('',*,*,#40788,.T.); +#40802 = ORIENTED_EDGE('',*,*,#37583,.T.); +#40803 = ORIENTED_EDGE('',*,*,#35815,.T.); +#40804 = ORIENTED_EDGE('',*,*,#35823,.T.); +#40805 = ORIENTED_EDGE('',*,*,#35749,.F.); +#40806 = PLANE('',#40807); +#40807 = AXIS2_PLACEMENT_3D('',#40808,#40809,#40810); +#40808 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#40809 = DIRECTION('',(0.,1.,0.)); +#40810 = DIRECTION('',(1.,0.,0.)); +#40811 = ADVANCED_FACE('',(#40812),#40823,.F.); +#40812 = FACE_BOUND('',#40813,.F.); +#40813 = EDGE_LOOP('',(#40814,#40815,#40821,#40822)); +#40814 = ORIENTED_EDGE('',*,*,#35763,.T.); +#40815 = ORIENTED_EDGE('',*,*,#40816,.T.); +#40816 = EDGE_CURVE('',#35766,#37609,#40817,.T.); +#40817 = LINE('',#40818,#40819); +#40818 = CARTESIAN_POINT('',(0.36,-12.75,0.)); +#40819 = VECTOR('',#40820,1.); +#40820 = DIRECTION('',(0.,0.,1.)); +#40821 = ORIENTED_EDGE('',*,*,#37606,.F.); +#40822 = ORIENTED_EDGE('',*,*,#40767,.F.); +#40823 = CYLINDRICAL_SURFACE('',#40824,0.275); +#40824 = AXIS2_PLACEMENT_3D('',#40825,#40826,#40827); +#40825 = CARTESIAN_POINT('',(0.635,-12.75,0.)); +#40826 = DIRECTION('',(0.,-0.,-1.)); +#40827 = DIRECTION('',(0.,1.,0.)); +#40828 = ADVANCED_FACE('',(#40829),#40836,.F.); +#40829 = FACE_BOUND('',#40830,.F.); +#40830 = EDGE_LOOP('',(#40831,#40832,#40833,#40834,#40835)); +#40831 = ORIENTED_EDGE('',*,*,#35800,.F.); +#40832 = ORIENTED_EDGE('',*,*,#35808,.F.); +#40833 = ORIENTED_EDGE('',*,*,#37626,.T.); +#40834 = ORIENTED_EDGE('',*,*,#40816,.F.); +#40835 = ORIENTED_EDGE('',*,*,#35774,.F.); +#40836 = PLANE('',#40837); +#40837 = AXIS2_PLACEMENT_3D('',#40838,#40839,#40840); +#40838 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#40839 = DIRECTION('',(0.,1.,0.)); +#40840 = DIRECTION('',(1.,0.,0.)); +#40841 = ADVANCED_FACE('',(#40842),#40856,.T.); +#40842 = FACE_BOUND('',#40843,.F.); +#40843 = EDGE_LOOP('',(#40844,#40851,#40852,#40853,#40854,#40855)); +#40844 = ORIENTED_EDGE('',*,*,#40845,.F.); +#40845 = EDGE_CURVE('',#38736,#38650,#40846,.T.); +#40846 = CIRCLE('',#40847,0.275); +#40847 = AXIS2_PLACEMENT_3D('',#40848,#40849,#40850); +#40848 = CARTESIAN_POINT('',(9.000000214576,3.99,0.799997854233)); +#40849 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40850 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40851 = ORIENTED_EDGE('',*,*,#38735,.T.); +#40852 = ORIENTED_EDGE('',*,*,#36097,.F.); +#40853 = ORIENTED_EDGE('',*,*,#36073,.F.); +#40854 = ORIENTED_EDGE('',*,*,#36049,.F.); +#40855 = ORIENTED_EDGE('',*,*,#38657,.T.); +#40856 = PLANE('',#40857); +#40857 = AXIS2_PLACEMENT_3D('',#40858,#40859,#40860); +#40858 = CARTESIAN_POINT('',(8.57126211065,3.99,0.799997956452)); +#40859 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40860 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40861 = ADVANCED_FACE('',(#40862),#40876,.T.); +#40862 = FACE_BOUND('',#40863,.F.); +#40863 = EDGE_LOOP('',(#40864,#40871,#40872,#40873,#40874,#40875)); +#40864 = ORIENTED_EDGE('',*,*,#40865,.F.); +#40865 = EDGE_CURVE('',#38870,#38784,#40866,.T.); +#40866 = CIRCLE('',#40867,0.275); +#40867 = AXIS2_PLACEMENT_3D('',#40868,#40869,#40870); +#40868 = CARTESIAN_POINT('',(9.000000214576,2.72,0.799997854233)); +#40869 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40870 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40871 = ORIENTED_EDGE('',*,*,#38869,.T.); +#40872 = ORIENTED_EDGE('',*,*,#36196,.F.); +#40873 = ORIENTED_EDGE('',*,*,#36172,.F.); +#40874 = ORIENTED_EDGE('',*,*,#36148,.F.); +#40875 = ORIENTED_EDGE('',*,*,#38791,.T.); +#40876 = PLANE('',#40877); +#40877 = AXIS2_PLACEMENT_3D('',#40878,#40879,#40880); +#40878 = CARTESIAN_POINT('',(8.57126211065,2.72,0.799997956452)); +#40879 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40880 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40881 = ADVANCED_FACE('',(#40882),#40896,.T.); +#40882 = FACE_BOUND('',#40883,.F.); +#40883 = EDGE_LOOP('',(#40884,#40891,#40892,#40893,#40894,#40895)); +#40884 = ORIENTED_EDGE('',*,*,#40885,.F.); +#40885 = EDGE_CURVE('',#39004,#38918,#40886,.T.); +#40886 = CIRCLE('',#40887,0.275); +#40887 = AXIS2_PLACEMENT_3D('',#40888,#40889,#40890); +#40888 = CARTESIAN_POINT('',(9.000000214576,1.45,0.799997854233)); +#40889 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40890 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40891 = ORIENTED_EDGE('',*,*,#39003,.T.); +#40892 = ORIENTED_EDGE('',*,*,#36295,.F.); +#40893 = ORIENTED_EDGE('',*,*,#36271,.F.); +#40894 = ORIENTED_EDGE('',*,*,#36247,.F.); +#40895 = ORIENTED_EDGE('',*,*,#38925,.T.); +#40896 = PLANE('',#40897); +#40897 = AXIS2_PLACEMENT_3D('',#40898,#40899,#40900); +#40898 = CARTESIAN_POINT('',(8.57126211065,1.45,0.799997956452)); +#40899 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40900 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40901 = ADVANCED_FACE('',(#40902),#40916,.T.); +#40902 = FACE_BOUND('',#40903,.F.); +#40903 = EDGE_LOOP('',(#40904,#40911,#40912,#40913,#40914,#40915)); +#40904 = ORIENTED_EDGE('',*,*,#40905,.F.); +#40905 = EDGE_CURVE('',#39138,#39052,#40906,.T.); +#40906 = CIRCLE('',#40907,0.275); +#40907 = AXIS2_PLACEMENT_3D('',#40908,#40909,#40910); +#40908 = CARTESIAN_POINT('',(9.000000214576,0.18,0.799997854233)); +#40909 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40910 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40911 = ORIENTED_EDGE('',*,*,#39137,.T.); +#40912 = ORIENTED_EDGE('',*,*,#36394,.F.); +#40913 = ORIENTED_EDGE('',*,*,#36370,.F.); +#40914 = ORIENTED_EDGE('',*,*,#36346,.F.); +#40915 = ORIENTED_EDGE('',*,*,#39059,.T.); +#40916 = PLANE('',#40917); +#40917 = AXIS2_PLACEMENT_3D('',#40918,#40919,#40920); +#40918 = CARTESIAN_POINT('',(8.57126211065,0.18,0.799997956452)); +#40919 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40920 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40921 = ADVANCED_FACE('',(#40922),#40936,.T.); +#40922 = FACE_BOUND('',#40923,.F.); +#40923 = EDGE_LOOP('',(#40924,#40931,#40932,#40933,#40934,#40935)); +#40924 = ORIENTED_EDGE('',*,*,#40925,.F.); +#40925 = EDGE_CURVE('',#39272,#39186,#40926,.T.); +#40926 = CIRCLE('',#40927,0.275); +#40927 = AXIS2_PLACEMENT_3D('',#40928,#40929,#40930); +#40928 = CARTESIAN_POINT('',(9.000000214576,-1.09,0.799997854233)); +#40929 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40930 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40931 = ORIENTED_EDGE('',*,*,#39271,.T.); +#40932 = ORIENTED_EDGE('',*,*,#36493,.F.); +#40933 = ORIENTED_EDGE('',*,*,#36469,.F.); +#40934 = ORIENTED_EDGE('',*,*,#36445,.F.); +#40935 = ORIENTED_EDGE('',*,*,#39193,.T.); +#40936 = PLANE('',#40937); +#40937 = AXIS2_PLACEMENT_3D('',#40938,#40939,#40940); +#40938 = CARTESIAN_POINT('',(8.57126211065,-1.09,0.799997956452)); +#40939 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40940 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40941 = ADVANCED_FACE('',(#40942),#40956,.T.); +#40942 = FACE_BOUND('',#40943,.F.); +#40943 = EDGE_LOOP('',(#40944,#40951,#40952,#40953,#40954,#40955)); +#40944 = ORIENTED_EDGE('',*,*,#40945,.F.); +#40945 = EDGE_CURVE('',#39406,#39320,#40946,.T.); +#40946 = CIRCLE('',#40947,0.275); +#40947 = AXIS2_PLACEMENT_3D('',#40948,#40949,#40950); +#40948 = CARTESIAN_POINT('',(9.000000214576,-2.36,0.799997854233)); +#40949 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40950 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40951 = ORIENTED_EDGE('',*,*,#39405,.T.); +#40952 = ORIENTED_EDGE('',*,*,#36592,.F.); +#40953 = ORIENTED_EDGE('',*,*,#36568,.F.); +#40954 = ORIENTED_EDGE('',*,*,#36544,.F.); +#40955 = ORIENTED_EDGE('',*,*,#39327,.T.); +#40956 = PLANE('',#40957); +#40957 = AXIS2_PLACEMENT_3D('',#40958,#40959,#40960); +#40958 = CARTESIAN_POINT('',(8.57126211065,-2.36,0.799997956452)); +#40959 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40960 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40961 = ADVANCED_FACE('',(#40962),#40976,.T.); +#40962 = FACE_BOUND('',#40963,.F.); +#40963 = EDGE_LOOP('',(#40964,#40971,#40972,#40973,#40974,#40975)); +#40964 = ORIENTED_EDGE('',*,*,#40965,.F.); +#40965 = EDGE_CURVE('',#39540,#39454,#40966,.T.); +#40966 = CIRCLE('',#40967,0.275); +#40967 = AXIS2_PLACEMENT_3D('',#40968,#40969,#40970); +#40968 = CARTESIAN_POINT('',(9.000000214576,-3.63,0.799997854233)); +#40969 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40970 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40971 = ORIENTED_EDGE('',*,*,#39539,.T.); +#40972 = ORIENTED_EDGE('',*,*,#36691,.F.); +#40973 = ORIENTED_EDGE('',*,*,#36667,.F.); +#40974 = ORIENTED_EDGE('',*,*,#36643,.F.); +#40975 = ORIENTED_EDGE('',*,*,#39461,.T.); +#40976 = PLANE('',#40977); +#40977 = AXIS2_PLACEMENT_3D('',#40978,#40979,#40980); +#40978 = CARTESIAN_POINT('',(8.57126211065,-3.63,0.799997956452)); +#40979 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40980 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40981 = ADVANCED_FACE('',(#40982),#40996,.T.); +#40982 = FACE_BOUND('',#40983,.F.); +#40983 = EDGE_LOOP('',(#40984,#40991,#40992,#40993,#40994,#40995)); +#40984 = ORIENTED_EDGE('',*,*,#40985,.F.); +#40985 = EDGE_CURVE('',#39674,#39588,#40986,.T.); +#40986 = CIRCLE('',#40987,0.275); +#40987 = AXIS2_PLACEMENT_3D('',#40988,#40989,#40990); +#40988 = CARTESIAN_POINT('',(9.000000214576,-4.9,0.799997854233)); +#40989 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40990 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40991 = ORIENTED_EDGE('',*,*,#39673,.T.); +#40992 = ORIENTED_EDGE('',*,*,#36790,.F.); +#40993 = ORIENTED_EDGE('',*,*,#36766,.F.); +#40994 = ORIENTED_EDGE('',*,*,#36742,.F.); +#40995 = ORIENTED_EDGE('',*,*,#39595,.T.); +#40996 = PLANE('',#40997); +#40997 = AXIS2_PLACEMENT_3D('',#40998,#40999,#41000); +#40998 = CARTESIAN_POINT('',(8.57126211065,-4.9,0.799997956452)); +#40999 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41000 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41001 = ADVANCED_FACE('',(#41002),#41016,.T.); +#41002 = FACE_BOUND('',#41003,.F.); +#41003 = EDGE_LOOP('',(#41004,#41011,#41012,#41013,#41014,#41015)); +#41004 = ORIENTED_EDGE('',*,*,#41005,.F.); +#41005 = EDGE_CURVE('',#39808,#39722,#41006,.T.); +#41006 = CIRCLE('',#41007,0.275); +#41007 = AXIS2_PLACEMENT_3D('',#41008,#41009,#41010); +#41008 = CARTESIAN_POINT('',(9.000000214576,-6.17,0.799997854233)); +#41009 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41010 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41011 = ORIENTED_EDGE('',*,*,#39807,.T.); +#41012 = ORIENTED_EDGE('',*,*,#36889,.F.); +#41013 = ORIENTED_EDGE('',*,*,#36865,.F.); +#41014 = ORIENTED_EDGE('',*,*,#36841,.F.); +#41015 = ORIENTED_EDGE('',*,*,#39729,.T.); +#41016 = PLANE('',#41017); +#41017 = AXIS2_PLACEMENT_3D('',#41018,#41019,#41020); +#41018 = CARTESIAN_POINT('',(8.57126211065,-6.17,0.799997956452)); +#41019 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41020 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41021 = ADVANCED_FACE('',(#41022),#41036,.T.); +#41022 = FACE_BOUND('',#41023,.F.); +#41023 = EDGE_LOOP('',(#41024,#41031,#41032,#41033,#41034,#41035)); +#41024 = ORIENTED_EDGE('',*,*,#41025,.F.); +#41025 = EDGE_CURVE('',#39942,#39856,#41026,.T.); +#41026 = CIRCLE('',#41027,0.275); +#41027 = AXIS2_PLACEMENT_3D('',#41028,#41029,#41030); +#41028 = CARTESIAN_POINT('',(9.000000214576,-7.44,0.799997854233)); +#41029 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41030 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41031 = ORIENTED_EDGE('',*,*,#39941,.T.); +#41032 = ORIENTED_EDGE('',*,*,#36988,.F.); +#41033 = ORIENTED_EDGE('',*,*,#36964,.F.); +#41034 = ORIENTED_EDGE('',*,*,#36940,.F.); +#41035 = ORIENTED_EDGE('',*,*,#39863,.T.); +#41036 = PLANE('',#41037); +#41037 = AXIS2_PLACEMENT_3D('',#41038,#41039,#41040); +#41038 = CARTESIAN_POINT('',(8.57126211065,-7.44,0.799997956452)); +#41039 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41040 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41041 = ADVANCED_FACE('',(#41042),#41056,.T.); +#41042 = FACE_BOUND('',#41043,.F.); +#41043 = EDGE_LOOP('',(#41044,#41051,#41052,#41053,#41054,#41055)); +#41044 = ORIENTED_EDGE('',*,*,#41045,.F.); +#41045 = EDGE_CURVE('',#40076,#39990,#41046,.T.); +#41046 = CIRCLE('',#41047,0.275); +#41047 = AXIS2_PLACEMENT_3D('',#41048,#41049,#41050); +#41048 = CARTESIAN_POINT('',(9.000000214576,-8.71,0.799997854233)); +#41049 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41050 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41051 = ORIENTED_EDGE('',*,*,#40075,.T.); +#41052 = ORIENTED_EDGE('',*,*,#37087,.F.); +#41053 = ORIENTED_EDGE('',*,*,#37063,.F.); +#41054 = ORIENTED_EDGE('',*,*,#37039,.F.); +#41055 = ORIENTED_EDGE('',*,*,#39997,.T.); +#41056 = PLANE('',#41057); +#41057 = AXIS2_PLACEMENT_3D('',#41058,#41059,#41060); +#41058 = CARTESIAN_POINT('',(8.57126211065,-8.71,0.799997956452)); +#41059 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41060 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41061 = ADVANCED_FACE('',(#41062),#41076,.T.); +#41062 = FACE_BOUND('',#41063,.F.); +#41063 = EDGE_LOOP('',(#41064,#41071,#41072,#41073,#41074,#41075)); +#41064 = ORIENTED_EDGE('',*,*,#41065,.F.); +#41065 = EDGE_CURVE('',#40210,#40124,#41066,.T.); +#41066 = CIRCLE('',#41067,0.275); +#41067 = AXIS2_PLACEMENT_3D('',#41068,#41069,#41070); +#41068 = CARTESIAN_POINT('',(9.000000214576,-9.98,0.799997854233)); +#41069 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41070 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41071 = ORIENTED_EDGE('',*,*,#40209,.T.); +#41072 = ORIENTED_EDGE('',*,*,#37186,.F.); +#41073 = ORIENTED_EDGE('',*,*,#37162,.F.); +#41074 = ORIENTED_EDGE('',*,*,#37138,.F.); +#41075 = ORIENTED_EDGE('',*,*,#40131,.T.); +#41076 = PLANE('',#41077); +#41077 = AXIS2_PLACEMENT_3D('',#41078,#41079,#41080); +#41078 = CARTESIAN_POINT('',(8.57126211065,-9.98,0.799997956452)); +#41079 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41080 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41081 = ADVANCED_FACE('',(#41082),#41096,.T.); +#41082 = FACE_BOUND('',#41083,.F.); +#41083 = EDGE_LOOP('',(#41084,#41091,#41092,#41093,#41094,#41095)); +#41084 = ORIENTED_EDGE('',*,*,#41085,.F.); +#41085 = EDGE_CURVE('',#40344,#40258,#41086,.T.); +#41086 = CIRCLE('',#41087,0.275); +#41087 = AXIS2_PLACEMENT_3D('',#41088,#41089,#41090); +#41088 = CARTESIAN_POINT('',(9.000000214576,-11.25,0.799997854233)); +#41089 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41090 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41091 = ORIENTED_EDGE('',*,*,#40343,.T.); +#41092 = ORIENTED_EDGE('',*,*,#37285,.F.); +#41093 = ORIENTED_EDGE('',*,*,#37261,.F.); +#41094 = ORIENTED_EDGE('',*,*,#37237,.F.); +#41095 = ORIENTED_EDGE('',*,*,#40265,.T.); +#41096 = PLANE('',#41097); +#41097 = AXIS2_PLACEMENT_3D('',#41098,#41099,#41100); +#41098 = CARTESIAN_POINT('',(8.57126211065,-11.25,0.799997956452)); +#41099 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41100 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41101 = ADVANCED_FACE('',(#41102),#41121,.T.); +#41102 = FACE_BOUND('',#41103,.T.); +#41103 = EDGE_LOOP('',(#41104,#41105,#41114)); +#41104 = ORIENTED_EDGE('',*,*,#37649,.F.); +#41105 = ORIENTED_EDGE('',*,*,#41106,.T.); +#41106 = EDGE_CURVE('',#37642,#41107,#41109,.T.); +#41107 = VERTEX_POINT('',#41108); +#41108 = CARTESIAN_POINT('',(-7.65,5.65,3.1)); +#41109 = CIRCLE('',#41110,0.25); +#41110 = AXIS2_PLACEMENT_3D('',#41111,#41112,#41113); +#41111 = CARTESIAN_POINT('',(-7.65,5.65,2.85)); +#41112 = DIRECTION('',(0.,1.,-6.E-17)); +#41113 = DIRECTION('',(0.,6.E-17,1.)); +#41114 = ORIENTED_EDGE('',*,*,#41115,.F.); +#41115 = EDGE_CURVE('',#37650,#41107,#41116,.T.); +#41116 = CIRCLE('',#41117,0.25); +#41117 = AXIS2_PLACEMENT_3D('',#41118,#41119,#41120); +#41118 = CARTESIAN_POINT('',(-7.65,5.65,2.85)); +#41119 = DIRECTION('',(1.,0.,0.)); +#41120 = DIRECTION('',(-0.,1.,0.)); +#41121 = SPHERICAL_SURFACE('',#41122,0.25); +#41122 = AXIS2_PLACEMENT_3D('',#41123,#41124,#41125); +#41123 = CARTESIAN_POINT('',(-7.65,5.65,2.85)); +#41124 = DIRECTION('',(1.,0.,0.)); +#41125 = DIRECTION('',(-0.,1.,0.)); +#41126 = ADVANCED_FACE('',(#41127),#41146,.T.); +#41127 = FACE_BOUND('',#41128,.T.); +#41128 = EDGE_LOOP('',(#41129,#41138,#41144,#41145)); +#41129 = ORIENTED_EDGE('',*,*,#41130,.F.); +#41130 = EDGE_CURVE('',#41131,#37674,#41133,.T.); +#41131 = VERTEX_POINT('',#41132); +#41132 = CARTESIAN_POINT('',(-7.65,-11.45,3.1)); +#41133 = CIRCLE('',#41134,0.25); +#41134 = AXIS2_PLACEMENT_3D('',#41135,#41136,#41137); +#41135 = CARTESIAN_POINT('',(-7.65,-11.45,2.85)); +#41136 = DIRECTION('',(6.E-17,-1.,0.)); +#41137 = DIRECTION('',(-1.,-6.E-17,0.)); +#41138 = ORIENTED_EDGE('',*,*,#41139,.T.); +#41139 = EDGE_CURVE('',#41131,#41107,#41140,.T.); +#41140 = LINE('',#41141,#41142); +#41141 = CARTESIAN_POINT('',(-7.65,-11.7,3.1)); +#41142 = VECTOR('',#41143,1.); +#41143 = DIRECTION('',(0.,1.,0.)); +#41144 = ORIENTED_EDGE('',*,*,#41106,.F.); +#41145 = ORIENTED_EDGE('',*,*,#37681,.F.); +#41146 = CYLINDRICAL_SURFACE('',#41147,0.25); +#41147 = AXIS2_PLACEMENT_3D('',#41148,#41149,#41150); +#41148 = CARTESIAN_POINT('',(-7.65,-11.7,2.85)); +#41149 = DIRECTION('',(0.,1.,0.)); +#41150 = DIRECTION('',(-1.,0.,0.)); +#41151 = ADVANCED_FACE('',(#41152),#41163,.T.); +#41152 = FACE_BOUND('',#41153,.T.); +#41153 = EDGE_LOOP('',(#41154,#41161,#41162)); +#41154 = ORIENTED_EDGE('',*,*,#41155,.F.); +#41155 = EDGE_CURVE('',#41131,#37697,#41156,.T.); +#41156 = CIRCLE('',#41157,0.25); +#41157 = AXIS2_PLACEMENT_3D('',#41158,#41159,#41160); +#41158 = CARTESIAN_POINT('',(-7.65,-11.45,2.85)); +#41159 = DIRECTION('',(1.,0.,0.)); +#41160 = DIRECTION('',(0.,-1.,0.)); +#41161 = ORIENTED_EDGE('',*,*,#41130,.T.); +#41162 = ORIENTED_EDGE('',*,*,#37704,.F.); +#41163 = SPHERICAL_SURFACE('',#41164,0.25); +#41164 = AXIS2_PLACEMENT_3D('',#41165,#41166,#41167); +#41165 = CARTESIAN_POINT('',(-7.65,-11.45,2.85)); +#41166 = DIRECTION('',(-0.,-0.,-1.)); +#41167 = DIRECTION('',(0.,-1.,0.)); +#41168 = ADVANCED_FACE('',(#41169),#41188,.T.); +#41169 = FACE_BOUND('',#41170,.T.); +#41170 = EDGE_LOOP('',(#41171,#41180,#41186,#41187)); +#41171 = ORIENTED_EDGE('',*,*,#41172,.F.); +#41172 = EDGE_CURVE('',#41173,#37723,#41175,.T.); +#41173 = VERTEX_POINT('',#41174); +#41174 = CARTESIAN_POINT('',(7.65,-11.45,3.1)); +#41175 = CIRCLE('',#41176,0.25); +#41176 = AXIS2_PLACEMENT_3D('',#41177,#41178,#41179); +#41177 = CARTESIAN_POINT('',(7.65,-11.45,2.85)); +#41178 = DIRECTION('',(1.,0.,0.)); +#41179 = DIRECTION('',(0.,-1.,0.)); +#41180 = ORIENTED_EDGE('',*,*,#41181,.T.); +#41181 = EDGE_CURVE('',#41173,#41131,#41182,.T.); +#41182 = LINE('',#41183,#41184); +#41183 = CARTESIAN_POINT('',(7.9,-11.45,3.1)); +#41184 = VECTOR('',#41185,1.); +#41185 = DIRECTION('',(-1.,0.,0.)); +#41186 = ORIENTED_EDGE('',*,*,#41155,.T.); +#41187 = ORIENTED_EDGE('',*,*,#37730,.F.); +#41188 = CYLINDRICAL_SURFACE('',#41189,0.25); +#41189 = AXIS2_PLACEMENT_3D('',#41190,#41191,#41192); +#41190 = CARTESIAN_POINT('',(7.9,-11.45,2.85)); +#41191 = DIRECTION('',(-1.,0.,0.)); +#41192 = DIRECTION('',(0.,-1.,0.)); +#41193 = ADVANCED_FACE('',(#41194),#41205,.T.); +#41194 = FACE_BOUND('',#41195,.T.); +#41195 = EDGE_LOOP('',(#41196,#41197,#41204)); +#41196 = ORIENTED_EDGE('',*,*,#37753,.T.); +#41197 = ORIENTED_EDGE('',*,*,#41198,.F.); +#41198 = EDGE_CURVE('',#41173,#37746,#41199,.T.); +#41199 = CIRCLE('',#41200,0.25); +#41200 = AXIS2_PLACEMENT_3D('',#41201,#41202,#41203); +#41201 = CARTESIAN_POINT('',(7.65,-11.45,2.85)); +#41202 = DIRECTION('',(6.E-17,1.,0.)); +#41203 = DIRECTION('',(1.,-6.E-17,0.)); +#41204 = ORIENTED_EDGE('',*,*,#41172,.T.); +#41205 = SPHERICAL_SURFACE('',#41206,0.25); +#41206 = AXIS2_PLACEMENT_3D('',#41207,#41208,#41209); +#41207 = CARTESIAN_POINT('',(7.65,-11.45,2.85)); +#41208 = DIRECTION('',(-0.,-0.,-1.)); +#41209 = DIRECTION('',(0.,-1.,0.)); +#41210 = ADVANCED_FACE('',(#41211),#41230,.T.); +#41211 = FACE_BOUND('',#41212,.T.); +#41212 = EDGE_LOOP('',(#41213,#41214,#41223,#41229)); +#41213 = ORIENTED_EDGE('',*,*,#37779,.F.); +#41214 = ORIENTED_EDGE('',*,*,#41215,.T.); +#41215 = EDGE_CURVE('',#37772,#41216,#41218,.T.); +#41216 = VERTEX_POINT('',#41217); +#41217 = CARTESIAN_POINT('',(7.65,5.65,3.1)); +#41218 = CIRCLE('',#41219,0.25); +#41219 = AXIS2_PLACEMENT_3D('',#41220,#41221,#41222); +#41220 = CARTESIAN_POINT('',(7.65,5.65,2.85)); +#41221 = DIRECTION('',(0.,-1.,0.)); +#41222 = DIRECTION('',(1.,0.,0.)); +#41223 = ORIENTED_EDGE('',*,*,#41224,.T.); +#41224 = EDGE_CURVE('',#41216,#41173,#41225,.T.); +#41225 = LINE('',#41226,#41227); +#41226 = CARTESIAN_POINT('',(7.65,5.9,3.1)); +#41227 = VECTOR('',#41228,1.); +#41228 = DIRECTION('',(0.,-1.,0.)); +#41229 = ORIENTED_EDGE('',*,*,#41198,.T.); +#41230 = CYLINDRICAL_SURFACE('',#41231,0.25); +#41231 = AXIS2_PLACEMENT_3D('',#41232,#41233,#41234); +#41232 = CARTESIAN_POINT('',(7.65,5.9,2.85)); +#41233 = DIRECTION('',(0.,-1.,0.)); +#41234 = DIRECTION('',(1.,0.,0.)); +#41235 = ADVANCED_FACE('',(#41236),#41247,.T.); +#41236 = FACE_BOUND('',#41237,.T.); +#41237 = EDGE_LOOP('',(#41238,#41239,#41246)); +#41238 = ORIENTED_EDGE('',*,*,#37802,.F.); +#41239 = ORIENTED_EDGE('',*,*,#41240,.T.); +#41240 = EDGE_CURVE('',#37795,#41216,#41241,.T.); +#41241 = CIRCLE('',#41242,0.25); +#41242 = AXIS2_PLACEMENT_3D('',#41243,#41244,#41245); +#41243 = CARTESIAN_POINT('',(7.65,5.65,2.85)); +#41244 = DIRECTION('',(1.,0.,-6.E-17)); +#41245 = DIRECTION('',(6.E-17,0.,1.)); +#41246 = ORIENTED_EDGE('',*,*,#41215,.F.); +#41247 = SPHERICAL_SURFACE('',#41248,0.25); +#41248 = AXIS2_PLACEMENT_3D('',#41249,#41250,#41251); +#41249 = CARTESIAN_POINT('',(7.65,5.65,2.85)); +#41250 = DIRECTION('',(0.,-1.,0.)); +#41251 = DIRECTION('',(1.,0.,0.)); +#41252 = ADVANCED_FACE('',(#41253),#41264,.T.); +#41253 = FACE_BOUND('',#41254,.T.); +#41254 = EDGE_LOOP('',(#41255,#41256,#41257,#41263)); +#41255 = ORIENTED_EDGE('',*,*,#37821,.F.); +#41256 = ORIENTED_EDGE('',*,*,#41115,.T.); +#41257 = ORIENTED_EDGE('',*,*,#41258,.T.); +#41258 = EDGE_CURVE('',#41107,#41216,#41259,.T.); +#41259 = LINE('',#41260,#41261); +#41260 = CARTESIAN_POINT('',(-7.9,5.65,3.1)); +#41261 = VECTOR('',#41262,1.); +#41262 = DIRECTION('',(1.,0.,0.)); +#41263 = ORIENTED_EDGE('',*,*,#41240,.F.); +#41264 = CYLINDRICAL_SURFACE('',#41265,0.25); +#41265 = AXIS2_PLACEMENT_3D('',#41266,#41267,#41268); +#41266 = CARTESIAN_POINT('',(-7.9,5.65,2.85)); +#41267 = DIRECTION('',(1.,0.,0.)); +#41268 = DIRECTION('',(-0.,1.,0.)); +#41269 = ADVANCED_FACE('',(#41270),#41300,.T.); +#41270 = FACE_BOUND('',#41271,.T.); +#41271 = EDGE_LOOP('',(#41272,#41273,#41274,#41275,#41276,#41277,#41278, + #41279,#41280,#41281,#41282,#41283,#41284,#41285,#41286,#41287, + #41288,#41289,#41290,#41291,#41292,#41293,#41294,#41295,#41296, + #41297,#41298,#41299)); +#41272 = ORIENTED_EDGE('',*,*,#37844,.T.); +#41273 = ORIENTED_EDGE('',*,*,#37868,.T.); +#41274 = ORIENTED_EDGE('',*,*,#37892,.T.); +#41275 = ORIENTED_EDGE('',*,*,#37916,.T.); +#41276 = ORIENTED_EDGE('',*,*,#37940,.T.); +#41277 = ORIENTED_EDGE('',*,*,#37964,.T.); +#41278 = ORIENTED_EDGE('',*,*,#37988,.T.); +#41279 = ORIENTED_EDGE('',*,*,#38012,.T.); +#41280 = ORIENTED_EDGE('',*,*,#38036,.T.); +#41281 = ORIENTED_EDGE('',*,*,#38060,.T.); +#41282 = ORIENTED_EDGE('',*,*,#38084,.T.); +#41283 = ORIENTED_EDGE('',*,*,#38108,.T.); +#41284 = ORIENTED_EDGE('',*,*,#38132,.T.); +#41285 = ORIENTED_EDGE('',*,*,#38156,.T.); +#41286 = ORIENTED_EDGE('',*,*,#38180,.T.); +#41287 = ORIENTED_EDGE('',*,*,#38204,.T.); +#41288 = ORIENTED_EDGE('',*,*,#38228,.T.); +#41289 = ORIENTED_EDGE('',*,*,#38252,.T.); +#41290 = ORIENTED_EDGE('',*,*,#38276,.T.); +#41291 = ORIENTED_EDGE('',*,*,#38300,.T.); +#41292 = ORIENTED_EDGE('',*,*,#38324,.T.); +#41293 = ORIENTED_EDGE('',*,*,#38348,.T.); +#41294 = ORIENTED_EDGE('',*,*,#38372,.T.); +#41295 = ORIENTED_EDGE('',*,*,#38396,.T.); +#41296 = ORIENTED_EDGE('',*,*,#38420,.T.); +#41297 = ORIENTED_EDGE('',*,*,#38444,.T.); +#41298 = ORIENTED_EDGE('',*,*,#38468,.T.); +#41299 = ORIENTED_EDGE('',*,*,#38492,.T.); +#41300 = PLANE('',#41301); +#41301 = AXIS2_PLACEMENT_3D('',#41302,#41303,#41304); +#41302 = CARTESIAN_POINT('',(0.444805194805,10.090909090909,1.)); +#41303 = DIRECTION('',(0.,0.,1.)); +#41304 = DIRECTION('',(1.,0.,-0.)); +#41305 = ADVANCED_FACE('',(#41306),#41312,.F.); +#41306 = FACE_BOUND('',#41307,.F.); +#41307 = EDGE_LOOP('',(#41308,#41309,#41310,#41311)); +#41308 = ORIENTED_EDGE('',*,*,#38743,.T.); +#41309 = ORIENTED_EDGE('',*,*,#40845,.T.); +#41310 = ORIENTED_EDGE('',*,*,#38649,.F.); +#41311 = ORIENTED_EDGE('',*,*,#38704,.F.); +#41312 = CYLINDRICAL_SURFACE('',#41313,0.275); +#41313 = AXIS2_PLACEMENT_3D('',#41314,#41315,#41316); +#41314 = CARTESIAN_POINT('',(9.000000023842,3.99,-2.14576734264E-06)); +#41315 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41316 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41317 = ADVANCED_FACE('',(#41318),#41324,.F.); +#41318 = FACE_BOUND('',#41319,.F.); +#41319 = EDGE_LOOP('',(#41320,#41321,#41322,#41323)); +#41320 = ORIENTED_EDGE('',*,*,#38877,.T.); +#41321 = ORIENTED_EDGE('',*,*,#40865,.T.); +#41322 = ORIENTED_EDGE('',*,*,#38783,.F.); +#41323 = ORIENTED_EDGE('',*,*,#38838,.F.); +#41324 = CYLINDRICAL_SURFACE('',#41325,0.275); +#41325 = AXIS2_PLACEMENT_3D('',#41326,#41327,#41328); +#41326 = CARTESIAN_POINT('',(9.000000023842,2.72,-2.14576734264E-06)); +#41327 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41328 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41329 = ADVANCED_FACE('',(#41330),#41336,.F.); +#41330 = FACE_BOUND('',#41331,.F.); +#41331 = EDGE_LOOP('',(#41332,#41333,#41334,#41335)); +#41332 = ORIENTED_EDGE('',*,*,#39011,.T.); +#41333 = ORIENTED_EDGE('',*,*,#40885,.T.); +#41334 = ORIENTED_EDGE('',*,*,#38917,.F.); +#41335 = ORIENTED_EDGE('',*,*,#38972,.F.); +#41336 = CYLINDRICAL_SURFACE('',#41337,0.275); +#41337 = AXIS2_PLACEMENT_3D('',#41338,#41339,#41340); +#41338 = CARTESIAN_POINT('',(9.000000023842,1.45,-2.14576734264E-06)); +#41339 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41340 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41341 = ADVANCED_FACE('',(#41342),#41348,.F.); +#41342 = FACE_BOUND('',#41343,.F.); +#41343 = EDGE_LOOP('',(#41344,#41345,#41346,#41347)); +#41344 = ORIENTED_EDGE('',*,*,#39145,.T.); +#41345 = ORIENTED_EDGE('',*,*,#40905,.T.); +#41346 = ORIENTED_EDGE('',*,*,#39051,.F.); +#41347 = ORIENTED_EDGE('',*,*,#39106,.F.); +#41348 = CYLINDRICAL_SURFACE('',#41349,0.275); +#41349 = AXIS2_PLACEMENT_3D('',#41350,#41351,#41352); +#41350 = CARTESIAN_POINT('',(9.000000023842,0.18,-2.14576734264E-06)); +#41351 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41352 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41353 = ADVANCED_FACE('',(#41354),#41360,.F.); +#41354 = FACE_BOUND('',#41355,.F.); +#41355 = EDGE_LOOP('',(#41356,#41357,#41358,#41359)); +#41356 = ORIENTED_EDGE('',*,*,#39279,.T.); +#41357 = ORIENTED_EDGE('',*,*,#40925,.T.); +#41358 = ORIENTED_EDGE('',*,*,#39185,.F.); +#41359 = ORIENTED_EDGE('',*,*,#39240,.F.); +#41360 = CYLINDRICAL_SURFACE('',#41361,0.275); +#41361 = AXIS2_PLACEMENT_3D('',#41362,#41363,#41364); +#41362 = CARTESIAN_POINT('',(9.000000023842,-1.09,-2.14576734264E-06)); +#41363 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41364 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41365 = ADVANCED_FACE('',(#41366),#41372,.F.); +#41366 = FACE_BOUND('',#41367,.F.); +#41367 = EDGE_LOOP('',(#41368,#41369,#41370,#41371)); +#41368 = ORIENTED_EDGE('',*,*,#39413,.T.); +#41369 = ORIENTED_EDGE('',*,*,#40945,.T.); +#41370 = ORIENTED_EDGE('',*,*,#39319,.F.); +#41371 = ORIENTED_EDGE('',*,*,#39374,.F.); +#41372 = CYLINDRICAL_SURFACE('',#41373,0.275); +#41373 = AXIS2_PLACEMENT_3D('',#41374,#41375,#41376); +#41374 = CARTESIAN_POINT('',(9.000000023842,-2.36,-2.14576734264E-06)); +#41375 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41376 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41377 = ADVANCED_FACE('',(#41378),#41384,.F.); +#41378 = FACE_BOUND('',#41379,.F.); +#41379 = EDGE_LOOP('',(#41380,#41381,#41382,#41383)); +#41380 = ORIENTED_EDGE('',*,*,#39547,.T.); +#41381 = ORIENTED_EDGE('',*,*,#40965,.T.); +#41382 = ORIENTED_EDGE('',*,*,#39453,.F.); +#41383 = ORIENTED_EDGE('',*,*,#39508,.F.); +#41384 = CYLINDRICAL_SURFACE('',#41385,0.275); +#41385 = AXIS2_PLACEMENT_3D('',#41386,#41387,#41388); +#41386 = CARTESIAN_POINT('',(9.000000023842,-3.63,-2.14576734264E-06)); +#41387 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41388 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41389 = ADVANCED_FACE('',(#41390),#41396,.F.); +#41390 = FACE_BOUND('',#41391,.F.); +#41391 = EDGE_LOOP('',(#41392,#41393,#41394,#41395)); +#41392 = ORIENTED_EDGE('',*,*,#39681,.T.); +#41393 = ORIENTED_EDGE('',*,*,#40985,.T.); +#41394 = ORIENTED_EDGE('',*,*,#39587,.F.); +#41395 = ORIENTED_EDGE('',*,*,#39642,.F.); +#41396 = CYLINDRICAL_SURFACE('',#41397,0.275); +#41397 = AXIS2_PLACEMENT_3D('',#41398,#41399,#41400); +#41398 = CARTESIAN_POINT('',(9.000000023842,-4.9,-2.14576734264E-06)); +#41399 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41400 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41401 = ADVANCED_FACE('',(#41402),#41408,.F.); +#41402 = FACE_BOUND('',#41403,.F.); +#41403 = EDGE_LOOP('',(#41404,#41405,#41406,#41407)); +#41404 = ORIENTED_EDGE('',*,*,#39815,.T.); +#41405 = ORIENTED_EDGE('',*,*,#41005,.T.); +#41406 = ORIENTED_EDGE('',*,*,#39721,.F.); +#41407 = ORIENTED_EDGE('',*,*,#39776,.F.); +#41408 = CYLINDRICAL_SURFACE('',#41409,0.275); +#41409 = AXIS2_PLACEMENT_3D('',#41410,#41411,#41412); +#41410 = CARTESIAN_POINT('',(9.000000023842,-6.17,-2.14576734264E-06)); +#41411 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41412 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41413 = ADVANCED_FACE('',(#41414),#41420,.F.); +#41414 = FACE_BOUND('',#41415,.F.); +#41415 = EDGE_LOOP('',(#41416,#41417,#41418,#41419)); +#41416 = ORIENTED_EDGE('',*,*,#39949,.T.); +#41417 = ORIENTED_EDGE('',*,*,#41025,.T.); +#41418 = ORIENTED_EDGE('',*,*,#39855,.F.); +#41419 = ORIENTED_EDGE('',*,*,#39910,.F.); +#41420 = CYLINDRICAL_SURFACE('',#41421,0.275); +#41421 = AXIS2_PLACEMENT_3D('',#41422,#41423,#41424); +#41422 = CARTESIAN_POINT('',(9.000000023842,-7.44,-2.14576734264E-06)); +#41423 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41424 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41425 = ADVANCED_FACE('',(#41426),#41432,.F.); +#41426 = FACE_BOUND('',#41427,.F.); +#41427 = EDGE_LOOP('',(#41428,#41429,#41430,#41431)); +#41428 = ORIENTED_EDGE('',*,*,#40083,.T.); +#41429 = ORIENTED_EDGE('',*,*,#41045,.T.); +#41430 = ORIENTED_EDGE('',*,*,#39989,.F.); +#41431 = ORIENTED_EDGE('',*,*,#40044,.F.); +#41432 = CYLINDRICAL_SURFACE('',#41433,0.275); +#41433 = AXIS2_PLACEMENT_3D('',#41434,#41435,#41436); +#41434 = CARTESIAN_POINT('',(9.000000023842,-8.71,-2.14576734264E-06)); +#41435 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41436 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41437 = ADVANCED_FACE('',(#41438),#41444,.F.); +#41438 = FACE_BOUND('',#41439,.F.); +#41439 = EDGE_LOOP('',(#41440,#41441,#41442,#41443)); +#41440 = ORIENTED_EDGE('',*,*,#40217,.T.); +#41441 = ORIENTED_EDGE('',*,*,#41065,.T.); +#41442 = ORIENTED_EDGE('',*,*,#40123,.F.); +#41443 = ORIENTED_EDGE('',*,*,#40178,.F.); +#41444 = CYLINDRICAL_SURFACE('',#41445,0.275); +#41445 = AXIS2_PLACEMENT_3D('',#41446,#41447,#41448); +#41446 = CARTESIAN_POINT('',(9.000000023842,-9.98,-2.14576734264E-06)); +#41447 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41448 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41449 = ADVANCED_FACE('',(#41450),#41456,.F.); +#41450 = FACE_BOUND('',#41451,.F.); +#41451 = EDGE_LOOP('',(#41452,#41453,#41454,#41455)); +#41452 = ORIENTED_EDGE('',*,*,#40351,.T.); +#41453 = ORIENTED_EDGE('',*,*,#41085,.T.); +#41454 = ORIENTED_EDGE('',*,*,#40257,.F.); +#41455 = ORIENTED_EDGE('',*,*,#40312,.F.); +#41456 = CYLINDRICAL_SURFACE('',#41457,0.275); +#41457 = AXIS2_PLACEMENT_3D('',#41458,#41459,#41460); +#41458 = CARTESIAN_POINT('',(9.000000023842,-11.25,-2.14576734264E-06)); +#41459 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#41460 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41461 = ADVANCED_FACE('',(#41462,#41468),#41479,.T.); +#41462 = FACE_BOUND('',#41463,.T.); +#41463 = EDGE_LOOP('',(#41464,#41465,#41466,#41467)); +#41464 = ORIENTED_EDGE('',*,*,#41181,.F.); +#41465 = ORIENTED_EDGE('',*,*,#41224,.F.); +#41466 = ORIENTED_EDGE('',*,*,#41258,.F.); +#41467 = ORIENTED_EDGE('',*,*,#41139,.F.); +#41468 = FACE_BOUND('',#41469,.T.); +#41469 = EDGE_LOOP('',(#41470)); +#41470 = ORIENTED_EDGE('',*,*,#41471,.F.); +#41471 = EDGE_CURVE('',#41472,#41472,#41474,.T.); +#41472 = VERTEX_POINT('',#41473); +#41473 = CARTESIAN_POINT('',(-5.45,-9.6,3.1)); +#41474 = CIRCLE('',#41475,0.25); +#41475 = AXIS2_PLACEMENT_3D('',#41476,#41477,#41478); +#41476 = CARTESIAN_POINT('',(-5.7,-9.6,3.1)); +#41477 = DIRECTION('',(0.,0.,1.)); +#41478 = DIRECTION('',(1.,0.,-0.)); +#41479 = PLANE('',#41480); +#41480 = AXIS2_PLACEMENT_3D('',#41481,#41482,#41483); +#41481 = CARTESIAN_POINT('',(0.,-2.9,3.1)); +#41482 = DIRECTION('',(0.,0.,1.)); +#41483 = DIRECTION('',(1.,0.,-0.)); +#41484 = ADVANCED_FACE('',(#41485),#41504,.F.); +#41485 = FACE_BOUND('',#41486,.F.); +#41486 = EDGE_LOOP('',(#41487,#41495,#41502,#41503)); +#41487 = ORIENTED_EDGE('',*,*,#41488,.T.); +#41488 = EDGE_CURVE('',#41472,#41489,#41491,.T.); +#41489 = VERTEX_POINT('',#41490); +#41490 = CARTESIAN_POINT('',(-5.45,-9.6,1.1)); +#41491 = LINE('',#41492,#41493); +#41492 = CARTESIAN_POINT('',(-5.45,-9.6,3.1)); +#41493 = VECTOR('',#41494,1.); +#41494 = DIRECTION('',(-0.,-0.,-1.)); +#41495 = ORIENTED_EDGE('',*,*,#41496,.T.); +#41496 = EDGE_CURVE('',#41489,#41489,#41497,.T.); +#41497 = CIRCLE('',#41498,0.25); +#41498 = AXIS2_PLACEMENT_3D('',#41499,#41500,#41501); +#41499 = CARTESIAN_POINT('',(-5.7,-9.6,1.1)); +#41500 = DIRECTION('',(0.,0.,1.)); +#41501 = DIRECTION('',(1.,0.,-0.)); +#41502 = ORIENTED_EDGE('',*,*,#41488,.F.); +#41503 = ORIENTED_EDGE('',*,*,#41471,.F.); +#41504 = CYLINDRICAL_SURFACE('',#41505,0.25); +#41505 = AXIS2_PLACEMENT_3D('',#41506,#41507,#41508); +#41506 = CARTESIAN_POINT('',(-5.7,-9.6,3.1)); +#41507 = DIRECTION('',(0.,0.,1.)); +#41508 = DIRECTION('',(1.,0.,-0.)); +#41509 = ADVANCED_FACE('',(#41510),#41513,.T.); +#41510 = FACE_BOUND('',#41511,.T.); +#41511 = EDGE_LOOP('',(#41512)); +#41512 = ORIENTED_EDGE('',*,*,#41496,.T.); +#41513 = PLANE('',#41514); +#41514 = AXIS2_PLACEMENT_3D('',#41515,#41516,#41517); +#41515 = CARTESIAN_POINT('',(-5.7,-9.6,1.1)); +#41516 = DIRECTION('',(0.,0.,1.)); +#41517 = DIRECTION('',(1.,0.,-0.)); +#41518 = ORIENTED_CLOSED_SHELL('',*,#41519,.F.); +#41519 = CLOSED_SHELL('',(#41520,#41560,#41591,#41615,#41639,#41656)); +#41520 = ADVANCED_FACE('',(#41521),#41555,.T.); +#41521 = FACE_BOUND('',#41522,.F.); +#41522 = EDGE_LOOP('',(#41523,#41533,#41541,#41549)); +#41523 = ORIENTED_EDGE('',*,*,#41524,.F.); +#41524 = EDGE_CURVE('',#41525,#41527,#41529,.T.); +#41525 = VERTEX_POINT('',#41526); +#41526 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#41527 = VERTEX_POINT('',#41528); +#41528 = CARTESIAN_POINT('',(8.550000119209,-10.8,0.399997961521)); +#41529 = LINE('',#41530,#41531); +#41530 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#41531 = VECTOR('',#41532,1.); +#41532 = DIRECTION('',(0.,0.,-1.)); +#41533 = ORIENTED_EDGE('',*,*,#41534,.T.); +#41534 = EDGE_CURVE('',#41525,#41535,#41537,.T.); +#41535 = VERTEX_POINT('',#41536); +#41536 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#41537 = LINE('',#41538,#41539); +#41538 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#41539 = VECTOR('',#41540,1.); +#41540 = DIRECTION('',(-1.,-0.,-0.)); +#41541 = ORIENTED_EDGE('',*,*,#41542,.T.); +#41542 = EDGE_CURVE('',#41535,#41543,#41545,.T.); +#41543 = VERTEX_POINT('',#41544); +#41544 = CARTESIAN_POINT('',(8.150000119209,-10.8,0.399998056888)); +#41545 = LINE('',#41546,#41547); +#41546 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#41547 = VECTOR('',#41548,1.); +#41548 = DIRECTION('',(0.,0.,-1.)); +#41549 = ORIENTED_EDGE('',*,*,#41550,.T.); +#41550 = EDGE_CURVE('',#41543,#41527,#41551,.T.); +#41551 = LINE('',#41552,#41553); +#41552 = CARTESIAN_POINT('',(8.150000119209,-10.8,0.399998056888)); +#41553 = VECTOR('',#41554,1.); +#41554 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41555 = PLANE('',#41556); +#41556 = AXIS2_PLACEMENT_3D('',#41557,#41558,#41559); +#41557 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#41558 = DIRECTION('',(0.,1.,0.)); +#41559 = DIRECTION('',(0.,-0.,1.)); +#41560 = ADVANCED_FACE('',(#41561),#41586,.T.); +#41561 = FACE_BOUND('',#41562,.T.); +#41562 = EDGE_LOOP('',(#41563,#41573,#41579,#41580)); +#41563 = ORIENTED_EDGE('',*,*,#41564,.T.); +#41564 = EDGE_CURVE('',#41565,#41567,#41569,.T.); +#41565 = VERTEX_POINT('',#41566); +#41566 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#41567 = VERTEX_POINT('',#41568); +#41568 = CARTESIAN_POINT('',(8.550000119209,-11.7,0.399997961521)); +#41569 = LINE('',#41570,#41571); +#41570 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#41571 = VECTOR('',#41572,1.); +#41572 = DIRECTION('',(0.,0.,-1.)); +#41573 = ORIENTED_EDGE('',*,*,#41574,.F.); +#41574 = EDGE_CURVE('',#41527,#41567,#41575,.T.); +#41575 = LINE('',#41576,#41577); +#41576 = CARTESIAN_POINT('',(8.550000119209,-10.8,0.399997961521)); +#41577 = VECTOR('',#41578,1.); +#41578 = DIRECTION('',(0.,-1.,0.)); +#41579 = ORIENTED_EDGE('',*,*,#41524,.F.); +#41580 = ORIENTED_EDGE('',*,*,#41581,.T.); +#41581 = EDGE_CURVE('',#41525,#41565,#41582,.T.); +#41582 = LINE('',#41583,#41584); +#41583 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#41584 = VECTOR('',#41585,1.); +#41585 = DIRECTION('',(-0.,-1.,-0.)); +#41586 = PLANE('',#41587); +#41587 = AXIS2_PLACEMENT_3D('',#41588,#41589,#41590); +#41588 = CARTESIAN_POINT('',(8.550000214576,-10.8,0.799997961521)); +#41589 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41590 = DIRECTION('',(0.,1.,0.)); +#41591 = ADVANCED_FACE('',(#41592),#41610,.F.); +#41592 = FACE_BOUND('',#41593,.T.); +#41593 = EDGE_LOOP('',(#41594,#41595,#41603,#41609)); +#41594 = ORIENTED_EDGE('',*,*,#41574,.T.); +#41595 = ORIENTED_EDGE('',*,*,#41596,.T.); +#41596 = EDGE_CURVE('',#41567,#41597,#41599,.T.); +#41597 = VERTEX_POINT('',#41598); +#41598 = CARTESIAN_POINT('',(8.150000119209,-11.7,0.399998056888)); +#41599 = LINE('',#41600,#41601); +#41600 = CARTESIAN_POINT('',(8.550000119209,-11.7,0.399997961521)); +#41601 = VECTOR('',#41602,1.); +#41602 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41603 = ORIENTED_EDGE('',*,*,#41604,.T.); +#41604 = EDGE_CURVE('',#41597,#41543,#41605,.T.); +#41605 = LINE('',#41606,#41607); +#41606 = CARTESIAN_POINT('',(8.150000119209,-11.7,0.399998056888)); +#41607 = VECTOR('',#41608,1.); +#41608 = DIRECTION('',(0.,1.,0.)); +#41609 = ORIENTED_EDGE('',*,*,#41550,.T.); +#41610 = PLANE('',#41611); +#41611 = AXIS2_PLACEMENT_3D('',#41612,#41613,#41614); +#41612 = CARTESIAN_POINT('',(8.350000119209,-11.25,0.399998009205)); +#41613 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41614 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41615 = ADVANCED_FACE('',(#41616),#41634,.F.); +#41616 = FACE_BOUND('',#41617,.T.); +#41617 = EDGE_LOOP('',(#41618,#41626,#41627,#41628)); +#41618 = ORIENTED_EDGE('',*,*,#41619,.F.); +#41619 = EDGE_CURVE('',#41535,#41620,#41622,.T.); +#41620 = VERTEX_POINT('',#41621); +#41621 = CARTESIAN_POINT('',(8.15,-11.7,0.4)); +#41622 = LINE('',#41623,#41624); +#41623 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#41624 = VECTOR('',#41625,1.); +#41625 = DIRECTION('',(-0.,-1.,-0.)); +#41626 = ORIENTED_EDGE('',*,*,#41542,.T.); +#41627 = ORIENTED_EDGE('',*,*,#41604,.F.); +#41628 = ORIENTED_EDGE('',*,*,#41629,.F.); +#41629 = EDGE_CURVE('',#41620,#41597,#41630,.T.); +#41630 = LINE('',#41631,#41632); +#41631 = CARTESIAN_POINT('',(8.15,-11.7,0.4)); +#41632 = VECTOR('',#41633,1.); +#41633 = DIRECTION('',(0.,0.,-1.)); +#41634 = PLANE('',#41635); +#41635 = AXIS2_PLACEMENT_3D('',#41636,#41637,#41638); +#41636 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#41637 = DIRECTION('',(1.,0.,0.)); +#41638 = DIRECTION('',(-0.,1.,0.)); +#41639 = ADVANCED_FACE('',(#41640),#41651,.F.); +#41640 = FACE_BOUND('',#41641,.T.); +#41641 = EDGE_LOOP('',(#41642,#41643,#41644,#41650)); +#41642 = ORIENTED_EDGE('',*,*,#41534,.T.); +#41643 = ORIENTED_EDGE('',*,*,#41619,.T.); +#41644 = ORIENTED_EDGE('',*,*,#41645,.F.); +#41645 = EDGE_CURVE('',#41565,#41620,#41646,.T.); +#41646 = LINE('',#41647,#41648); +#41647 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#41648 = VECTOR('',#41649,1.); +#41649 = DIRECTION('',(-1.,-0.,-0.)); +#41650 = ORIENTED_EDGE('',*,*,#41581,.F.); +#41651 = PLANE('',#41652); +#41652 = AXIS2_PLACEMENT_3D('',#41653,#41654,#41655); +#41653 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#41654 = DIRECTION('',(-0.,-0.,-1.)); +#41655 = DIRECTION('',(0.,1.,-0.)); +#41656 = ADVANCED_FACE('',(#41657),#41663,.F.); +#41657 = FACE_BOUND('',#41658,.T.); +#41658 = EDGE_LOOP('',(#41659,#41660,#41661,#41662)); +#41659 = ORIENTED_EDGE('',*,*,#41564,.F.); +#41660 = ORIENTED_EDGE('',*,*,#41645,.T.); +#41661 = ORIENTED_EDGE('',*,*,#41629,.T.); +#41662 = ORIENTED_EDGE('',*,*,#41596,.F.); +#41663 = PLANE('',#41664); +#41664 = AXIS2_PLACEMENT_3D('',#41665,#41666,#41667); +#41665 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#41666 = DIRECTION('',(0.,1.,0.)); +#41667 = DIRECTION('',(0.,-0.,1.)); +#41668 = ORIENTED_CLOSED_SHELL('',*,#41669,.F.); +#41669 = CLOSED_SHELL('',(#41670,#41710,#41741,#41765,#41789,#41806)); +#41670 = ADVANCED_FACE('',(#41671),#41705,.T.); +#41671 = FACE_BOUND('',#41672,.F.); +#41672 = EDGE_LOOP('',(#41673,#41683,#41691,#41699)); +#41673 = ORIENTED_EDGE('',*,*,#41674,.F.); +#41674 = EDGE_CURVE('',#41675,#41677,#41679,.T.); +#41675 = VERTEX_POINT('',#41676); +#41676 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41677 = VERTEX_POINT('',#41678); +#41678 = CARTESIAN_POINT('',(8.550000119209,-9.53,0.399997961521)); +#41679 = LINE('',#41680,#41681); +#41680 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41681 = VECTOR('',#41682,1.); +#41682 = DIRECTION('',(0.,0.,-1.)); +#41683 = ORIENTED_EDGE('',*,*,#41684,.T.); +#41684 = EDGE_CURVE('',#41675,#41685,#41687,.T.); +#41685 = VERTEX_POINT('',#41686); +#41686 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#41687 = LINE('',#41688,#41689); +#41688 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41689 = VECTOR('',#41690,1.); +#41690 = DIRECTION('',(-1.,-0.,-0.)); +#41691 = ORIENTED_EDGE('',*,*,#41692,.T.); +#41692 = EDGE_CURVE('',#41685,#41693,#41695,.T.); +#41693 = VERTEX_POINT('',#41694); +#41694 = CARTESIAN_POINT('',(8.150000119209,-9.53,0.399998056888)); +#41695 = LINE('',#41696,#41697); +#41696 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#41697 = VECTOR('',#41698,1.); +#41698 = DIRECTION('',(0.,0.,-1.)); +#41699 = ORIENTED_EDGE('',*,*,#41700,.T.); +#41700 = EDGE_CURVE('',#41693,#41677,#41701,.T.); +#41701 = LINE('',#41702,#41703); +#41702 = CARTESIAN_POINT('',(8.150000119209,-9.53,0.399998056888)); +#41703 = VECTOR('',#41704,1.); +#41704 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41705 = PLANE('',#41706); +#41706 = AXIS2_PLACEMENT_3D('',#41707,#41708,#41709); +#41707 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41708 = DIRECTION('',(0.,1.,0.)); +#41709 = DIRECTION('',(0.,-0.,1.)); +#41710 = ADVANCED_FACE('',(#41711),#41736,.T.); +#41711 = FACE_BOUND('',#41712,.T.); +#41712 = EDGE_LOOP('',(#41713,#41723,#41729,#41730)); +#41713 = ORIENTED_EDGE('',*,*,#41714,.T.); +#41714 = EDGE_CURVE('',#41715,#41717,#41719,.T.); +#41715 = VERTEX_POINT('',#41716); +#41716 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41717 = VERTEX_POINT('',#41718); +#41718 = CARTESIAN_POINT('',(8.550000119209,-10.43,0.399997961521)); +#41719 = LINE('',#41720,#41721); +#41720 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41721 = VECTOR('',#41722,1.); +#41722 = DIRECTION('',(0.,0.,-1.)); +#41723 = ORIENTED_EDGE('',*,*,#41724,.F.); +#41724 = EDGE_CURVE('',#41677,#41717,#41725,.T.); +#41725 = LINE('',#41726,#41727); +#41726 = CARTESIAN_POINT('',(8.550000119209,-9.53,0.399997961521)); +#41727 = VECTOR('',#41728,1.); +#41728 = DIRECTION('',(0.,-1.,0.)); +#41729 = ORIENTED_EDGE('',*,*,#41674,.F.); +#41730 = ORIENTED_EDGE('',*,*,#41731,.T.); +#41731 = EDGE_CURVE('',#41675,#41715,#41732,.T.); +#41732 = LINE('',#41733,#41734); +#41733 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41734 = VECTOR('',#41735,1.); +#41735 = DIRECTION('',(-0.,-1.,-0.)); +#41736 = PLANE('',#41737); +#41737 = AXIS2_PLACEMENT_3D('',#41738,#41739,#41740); +#41738 = CARTESIAN_POINT('',(8.550000214576,-9.53,0.799997961521)); +#41739 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41740 = DIRECTION('',(0.,1.,0.)); +#41741 = ADVANCED_FACE('',(#41742),#41760,.F.); +#41742 = FACE_BOUND('',#41743,.T.); +#41743 = EDGE_LOOP('',(#41744,#41745,#41753,#41759)); +#41744 = ORIENTED_EDGE('',*,*,#41724,.T.); +#41745 = ORIENTED_EDGE('',*,*,#41746,.T.); +#41746 = EDGE_CURVE('',#41717,#41747,#41749,.T.); +#41747 = VERTEX_POINT('',#41748); +#41748 = CARTESIAN_POINT('',(8.150000119209,-10.43,0.399998056888)); +#41749 = LINE('',#41750,#41751); +#41750 = CARTESIAN_POINT('',(8.550000119209,-10.43,0.399997961521)); +#41751 = VECTOR('',#41752,1.); +#41752 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41753 = ORIENTED_EDGE('',*,*,#41754,.T.); +#41754 = EDGE_CURVE('',#41747,#41693,#41755,.T.); +#41755 = LINE('',#41756,#41757); +#41756 = CARTESIAN_POINT('',(8.150000119209,-10.43,0.399998056888)); +#41757 = VECTOR('',#41758,1.); +#41758 = DIRECTION('',(0.,1.,0.)); +#41759 = ORIENTED_EDGE('',*,*,#41700,.T.); +#41760 = PLANE('',#41761); +#41761 = AXIS2_PLACEMENT_3D('',#41762,#41763,#41764); +#41762 = CARTESIAN_POINT('',(8.350000119209,-9.98,0.399998009205)); +#41763 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41764 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41765 = ADVANCED_FACE('',(#41766),#41784,.F.); +#41766 = FACE_BOUND('',#41767,.T.); +#41767 = EDGE_LOOP('',(#41768,#41776,#41777,#41778)); +#41768 = ORIENTED_EDGE('',*,*,#41769,.F.); +#41769 = EDGE_CURVE('',#41685,#41770,#41772,.T.); +#41770 = VERTEX_POINT('',#41771); +#41771 = CARTESIAN_POINT('',(8.15,-10.43,0.4)); +#41772 = LINE('',#41773,#41774); +#41773 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#41774 = VECTOR('',#41775,1.); +#41775 = DIRECTION('',(-0.,-1.,-0.)); +#41776 = ORIENTED_EDGE('',*,*,#41692,.T.); +#41777 = ORIENTED_EDGE('',*,*,#41754,.F.); +#41778 = ORIENTED_EDGE('',*,*,#41779,.F.); +#41779 = EDGE_CURVE('',#41770,#41747,#41780,.T.); +#41780 = LINE('',#41781,#41782); +#41781 = CARTESIAN_POINT('',(8.15,-10.43,0.4)); +#41782 = VECTOR('',#41783,1.); +#41783 = DIRECTION('',(0.,0.,-1.)); +#41784 = PLANE('',#41785); +#41785 = AXIS2_PLACEMENT_3D('',#41786,#41787,#41788); +#41786 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#41787 = DIRECTION('',(1.,0.,0.)); +#41788 = DIRECTION('',(-0.,1.,0.)); +#41789 = ADVANCED_FACE('',(#41790),#41801,.F.); +#41790 = FACE_BOUND('',#41791,.T.); +#41791 = EDGE_LOOP('',(#41792,#41793,#41794,#41800)); +#41792 = ORIENTED_EDGE('',*,*,#41684,.T.); +#41793 = ORIENTED_EDGE('',*,*,#41769,.T.); +#41794 = ORIENTED_EDGE('',*,*,#41795,.F.); +#41795 = EDGE_CURVE('',#41715,#41770,#41796,.T.); +#41796 = LINE('',#41797,#41798); +#41797 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41798 = VECTOR('',#41799,1.); +#41799 = DIRECTION('',(-1.,-0.,-0.)); +#41800 = ORIENTED_EDGE('',*,*,#41731,.F.); +#41801 = PLANE('',#41802); +#41802 = AXIS2_PLACEMENT_3D('',#41803,#41804,#41805); +#41803 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41804 = DIRECTION('',(-0.,-0.,-1.)); +#41805 = DIRECTION('',(0.,1.,-0.)); +#41806 = ADVANCED_FACE('',(#41807),#41813,.F.); +#41807 = FACE_BOUND('',#41808,.T.); +#41808 = EDGE_LOOP('',(#41809,#41810,#41811,#41812)); +#41809 = ORIENTED_EDGE('',*,*,#41714,.F.); +#41810 = ORIENTED_EDGE('',*,*,#41795,.T.); +#41811 = ORIENTED_EDGE('',*,*,#41779,.T.); +#41812 = ORIENTED_EDGE('',*,*,#41746,.F.); +#41813 = PLANE('',#41814); +#41814 = AXIS2_PLACEMENT_3D('',#41815,#41816,#41817); +#41815 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41816 = DIRECTION('',(0.,1.,0.)); +#41817 = DIRECTION('',(0.,-0.,1.)); +#41818 = ORIENTED_CLOSED_SHELL('',*,#41819,.F.); +#41819 = CLOSED_SHELL('',(#41820,#41860,#41891,#41915,#41939,#41956)); +#41820 = ADVANCED_FACE('',(#41821),#41855,.T.); +#41821 = FACE_BOUND('',#41822,.F.); +#41822 = EDGE_LOOP('',(#41823,#41833,#41841,#41849)); +#41823 = ORIENTED_EDGE('',*,*,#41824,.F.); +#41824 = EDGE_CURVE('',#41825,#41827,#41829,.T.); +#41825 = VERTEX_POINT('',#41826); +#41826 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41827 = VERTEX_POINT('',#41828); +#41828 = CARTESIAN_POINT('',(8.550000119209,-8.26,0.399997961521)); +#41829 = LINE('',#41830,#41831); +#41830 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41831 = VECTOR('',#41832,1.); +#41832 = DIRECTION('',(0.,0.,-1.)); +#41833 = ORIENTED_EDGE('',*,*,#41834,.T.); +#41834 = EDGE_CURVE('',#41825,#41835,#41837,.T.); +#41835 = VERTEX_POINT('',#41836); +#41836 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#41837 = LINE('',#41838,#41839); +#41838 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41839 = VECTOR('',#41840,1.); +#41840 = DIRECTION('',(-1.,-0.,-0.)); +#41841 = ORIENTED_EDGE('',*,*,#41842,.T.); +#41842 = EDGE_CURVE('',#41835,#41843,#41845,.T.); +#41843 = VERTEX_POINT('',#41844); +#41844 = CARTESIAN_POINT('',(8.150000119209,-8.26,0.399998056888)); +#41845 = LINE('',#41846,#41847); +#41846 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#41847 = VECTOR('',#41848,1.); +#41848 = DIRECTION('',(0.,0.,-1.)); +#41849 = ORIENTED_EDGE('',*,*,#41850,.T.); +#41850 = EDGE_CURVE('',#41843,#41827,#41851,.T.); +#41851 = LINE('',#41852,#41853); +#41852 = CARTESIAN_POINT('',(8.150000119209,-8.26,0.399998056888)); +#41853 = VECTOR('',#41854,1.); +#41854 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41855 = PLANE('',#41856); +#41856 = AXIS2_PLACEMENT_3D('',#41857,#41858,#41859); +#41857 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41858 = DIRECTION('',(0.,1.,0.)); +#41859 = DIRECTION('',(0.,-0.,1.)); +#41860 = ADVANCED_FACE('',(#41861),#41886,.T.); +#41861 = FACE_BOUND('',#41862,.T.); +#41862 = EDGE_LOOP('',(#41863,#41873,#41879,#41880)); +#41863 = ORIENTED_EDGE('',*,*,#41864,.T.); +#41864 = EDGE_CURVE('',#41865,#41867,#41869,.T.); +#41865 = VERTEX_POINT('',#41866); +#41866 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41867 = VERTEX_POINT('',#41868); +#41868 = CARTESIAN_POINT('',(8.550000119209,-9.16,0.399997961521)); +#41869 = LINE('',#41870,#41871); +#41870 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41871 = VECTOR('',#41872,1.); +#41872 = DIRECTION('',(0.,0.,-1.)); +#41873 = ORIENTED_EDGE('',*,*,#41874,.F.); +#41874 = EDGE_CURVE('',#41827,#41867,#41875,.T.); +#41875 = LINE('',#41876,#41877); +#41876 = CARTESIAN_POINT('',(8.550000119209,-8.26,0.399997961521)); +#41877 = VECTOR('',#41878,1.); +#41878 = DIRECTION('',(0.,-1.,0.)); +#41879 = ORIENTED_EDGE('',*,*,#41824,.F.); +#41880 = ORIENTED_EDGE('',*,*,#41881,.T.); +#41881 = EDGE_CURVE('',#41825,#41865,#41882,.T.); +#41882 = LINE('',#41883,#41884); +#41883 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41884 = VECTOR('',#41885,1.); +#41885 = DIRECTION('',(-0.,-1.,-0.)); +#41886 = PLANE('',#41887); +#41887 = AXIS2_PLACEMENT_3D('',#41888,#41889,#41890); +#41888 = CARTESIAN_POINT('',(8.550000214576,-8.26,0.799997961521)); +#41889 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41890 = DIRECTION('',(0.,1.,0.)); +#41891 = ADVANCED_FACE('',(#41892),#41910,.F.); +#41892 = FACE_BOUND('',#41893,.T.); +#41893 = EDGE_LOOP('',(#41894,#41895,#41903,#41909)); +#41894 = ORIENTED_EDGE('',*,*,#41874,.T.); +#41895 = ORIENTED_EDGE('',*,*,#41896,.T.); +#41896 = EDGE_CURVE('',#41867,#41897,#41899,.T.); +#41897 = VERTEX_POINT('',#41898); +#41898 = CARTESIAN_POINT('',(8.150000119209,-9.16,0.399998056888)); +#41899 = LINE('',#41900,#41901); +#41900 = CARTESIAN_POINT('',(8.550000119209,-9.16,0.399997961521)); +#41901 = VECTOR('',#41902,1.); +#41902 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41903 = ORIENTED_EDGE('',*,*,#41904,.T.); +#41904 = EDGE_CURVE('',#41897,#41843,#41905,.T.); +#41905 = LINE('',#41906,#41907); +#41906 = CARTESIAN_POINT('',(8.150000119209,-9.16,0.399998056888)); +#41907 = VECTOR('',#41908,1.); +#41908 = DIRECTION('',(0.,1.,0.)); +#41909 = ORIENTED_EDGE('',*,*,#41850,.T.); +#41910 = PLANE('',#41911); +#41911 = AXIS2_PLACEMENT_3D('',#41912,#41913,#41914); +#41912 = CARTESIAN_POINT('',(8.350000119209,-8.71,0.399998009205)); +#41913 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41914 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41915 = ADVANCED_FACE('',(#41916),#41934,.F.); +#41916 = FACE_BOUND('',#41917,.T.); +#41917 = EDGE_LOOP('',(#41918,#41926,#41927,#41928)); +#41918 = ORIENTED_EDGE('',*,*,#41919,.F.); +#41919 = EDGE_CURVE('',#41835,#41920,#41922,.T.); +#41920 = VERTEX_POINT('',#41921); +#41921 = CARTESIAN_POINT('',(8.15,-9.16,0.4)); +#41922 = LINE('',#41923,#41924); +#41923 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#41924 = VECTOR('',#41925,1.); +#41925 = DIRECTION('',(-0.,-1.,-0.)); +#41926 = ORIENTED_EDGE('',*,*,#41842,.T.); +#41927 = ORIENTED_EDGE('',*,*,#41904,.F.); +#41928 = ORIENTED_EDGE('',*,*,#41929,.F.); +#41929 = EDGE_CURVE('',#41920,#41897,#41930,.T.); +#41930 = LINE('',#41931,#41932); +#41931 = CARTESIAN_POINT('',(8.15,-9.16,0.4)); +#41932 = VECTOR('',#41933,1.); +#41933 = DIRECTION('',(0.,0.,-1.)); +#41934 = PLANE('',#41935); +#41935 = AXIS2_PLACEMENT_3D('',#41936,#41937,#41938); +#41936 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#41937 = DIRECTION('',(1.,0.,0.)); +#41938 = DIRECTION('',(-0.,1.,0.)); +#41939 = ADVANCED_FACE('',(#41940),#41951,.F.); +#41940 = FACE_BOUND('',#41941,.T.); +#41941 = EDGE_LOOP('',(#41942,#41943,#41944,#41950)); +#41942 = ORIENTED_EDGE('',*,*,#41834,.T.); +#41943 = ORIENTED_EDGE('',*,*,#41919,.T.); +#41944 = ORIENTED_EDGE('',*,*,#41945,.F.); +#41945 = EDGE_CURVE('',#41865,#41920,#41946,.T.); +#41946 = LINE('',#41947,#41948); +#41947 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41948 = VECTOR('',#41949,1.); +#41949 = DIRECTION('',(-1.,-0.,-0.)); +#41950 = ORIENTED_EDGE('',*,*,#41881,.F.); +#41951 = PLANE('',#41952); +#41952 = AXIS2_PLACEMENT_3D('',#41953,#41954,#41955); +#41953 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41954 = DIRECTION('',(-0.,-0.,-1.)); +#41955 = DIRECTION('',(0.,1.,-0.)); +#41956 = ADVANCED_FACE('',(#41957),#41963,.F.); +#41957 = FACE_BOUND('',#41958,.T.); +#41958 = EDGE_LOOP('',(#41959,#41960,#41961,#41962)); +#41959 = ORIENTED_EDGE('',*,*,#41864,.F.); +#41960 = ORIENTED_EDGE('',*,*,#41945,.T.); +#41961 = ORIENTED_EDGE('',*,*,#41929,.T.); +#41962 = ORIENTED_EDGE('',*,*,#41896,.F.); +#41963 = PLANE('',#41964); +#41964 = AXIS2_PLACEMENT_3D('',#41965,#41966,#41967); +#41965 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41966 = DIRECTION('',(0.,1.,0.)); +#41967 = DIRECTION('',(0.,-0.,1.)); +#41968 = ORIENTED_CLOSED_SHELL('',*,#41969,.F.); +#41969 = CLOSED_SHELL('',(#41970,#42010,#42041,#42065,#42089,#42106)); +#41970 = ADVANCED_FACE('',(#41971),#42005,.T.); +#41971 = FACE_BOUND('',#41972,.F.); +#41972 = EDGE_LOOP('',(#41973,#41983,#41991,#41999)); +#41973 = ORIENTED_EDGE('',*,*,#41974,.F.); +#41974 = EDGE_CURVE('',#41975,#41977,#41979,.T.); +#41975 = VERTEX_POINT('',#41976); +#41976 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#41977 = VERTEX_POINT('',#41978); +#41978 = CARTESIAN_POINT('',(8.550000119209,-6.99,0.399997961521)); +#41979 = LINE('',#41980,#41981); +#41980 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#41981 = VECTOR('',#41982,1.); +#41982 = DIRECTION('',(0.,0.,-1.)); +#41983 = ORIENTED_EDGE('',*,*,#41984,.T.); +#41984 = EDGE_CURVE('',#41975,#41985,#41987,.T.); +#41985 = VERTEX_POINT('',#41986); +#41986 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#41987 = LINE('',#41988,#41989); +#41988 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#41989 = VECTOR('',#41990,1.); +#41990 = DIRECTION('',(-1.,-0.,-0.)); +#41991 = ORIENTED_EDGE('',*,*,#41992,.T.); +#41992 = EDGE_CURVE('',#41985,#41993,#41995,.T.); +#41993 = VERTEX_POINT('',#41994); +#41994 = CARTESIAN_POINT('',(8.150000119209,-6.99,0.399998056888)); +#41995 = LINE('',#41996,#41997); +#41996 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#41997 = VECTOR('',#41998,1.); +#41998 = DIRECTION('',(0.,0.,-1.)); +#41999 = ORIENTED_EDGE('',*,*,#42000,.T.); +#42000 = EDGE_CURVE('',#41993,#41977,#42001,.T.); +#42001 = LINE('',#42002,#42003); +#42002 = CARTESIAN_POINT('',(8.150000119209,-6.99,0.399998056888)); +#42003 = VECTOR('',#42004,1.); +#42004 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42005 = PLANE('',#42006); +#42006 = AXIS2_PLACEMENT_3D('',#42007,#42008,#42009); +#42007 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#42008 = DIRECTION('',(0.,1.,0.)); +#42009 = DIRECTION('',(0.,-0.,1.)); +#42010 = ADVANCED_FACE('',(#42011),#42036,.T.); +#42011 = FACE_BOUND('',#42012,.T.); +#42012 = EDGE_LOOP('',(#42013,#42023,#42029,#42030)); +#42013 = ORIENTED_EDGE('',*,*,#42014,.T.); +#42014 = EDGE_CURVE('',#42015,#42017,#42019,.T.); +#42015 = VERTEX_POINT('',#42016); +#42016 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#42017 = VERTEX_POINT('',#42018); +#42018 = CARTESIAN_POINT('',(8.550000119209,-7.89,0.399997961521)); +#42019 = LINE('',#42020,#42021); +#42020 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#42021 = VECTOR('',#42022,1.); +#42022 = DIRECTION('',(0.,0.,-1.)); +#42023 = ORIENTED_EDGE('',*,*,#42024,.F.); +#42024 = EDGE_CURVE('',#41977,#42017,#42025,.T.); +#42025 = LINE('',#42026,#42027); +#42026 = CARTESIAN_POINT('',(8.550000119209,-6.99,0.399997961521)); +#42027 = VECTOR('',#42028,1.); +#42028 = DIRECTION('',(0.,-1.,0.)); +#42029 = ORIENTED_EDGE('',*,*,#41974,.F.); +#42030 = ORIENTED_EDGE('',*,*,#42031,.T.); +#42031 = EDGE_CURVE('',#41975,#42015,#42032,.T.); +#42032 = LINE('',#42033,#42034); +#42033 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#42034 = VECTOR('',#42035,1.); +#42035 = DIRECTION('',(-0.,-1.,-0.)); +#42036 = PLANE('',#42037); +#42037 = AXIS2_PLACEMENT_3D('',#42038,#42039,#42040); +#42038 = CARTESIAN_POINT('',(8.550000214576,-6.99,0.799997961521)); +#42039 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42040 = DIRECTION('',(0.,1.,0.)); +#42041 = ADVANCED_FACE('',(#42042),#42060,.F.); +#42042 = FACE_BOUND('',#42043,.T.); +#42043 = EDGE_LOOP('',(#42044,#42045,#42053,#42059)); +#42044 = ORIENTED_EDGE('',*,*,#42024,.T.); +#42045 = ORIENTED_EDGE('',*,*,#42046,.T.); +#42046 = EDGE_CURVE('',#42017,#42047,#42049,.T.); +#42047 = VERTEX_POINT('',#42048); +#42048 = CARTESIAN_POINT('',(8.150000119209,-7.89,0.399998056888)); +#42049 = LINE('',#42050,#42051); +#42050 = CARTESIAN_POINT('',(8.550000119209,-7.89,0.399997961521)); +#42051 = VECTOR('',#42052,1.); +#42052 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42053 = ORIENTED_EDGE('',*,*,#42054,.T.); +#42054 = EDGE_CURVE('',#42047,#41993,#42055,.T.); +#42055 = LINE('',#42056,#42057); +#42056 = CARTESIAN_POINT('',(8.150000119209,-7.89,0.399998056888)); +#42057 = VECTOR('',#42058,1.); +#42058 = DIRECTION('',(0.,1.,0.)); +#42059 = ORIENTED_EDGE('',*,*,#42000,.T.); +#42060 = PLANE('',#42061); +#42061 = AXIS2_PLACEMENT_3D('',#42062,#42063,#42064); +#42062 = CARTESIAN_POINT('',(8.350000119209,-7.44,0.399998009205)); +#42063 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42064 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42065 = ADVANCED_FACE('',(#42066),#42084,.F.); +#42066 = FACE_BOUND('',#42067,.T.); +#42067 = EDGE_LOOP('',(#42068,#42076,#42077,#42078)); +#42068 = ORIENTED_EDGE('',*,*,#42069,.F.); +#42069 = EDGE_CURVE('',#41985,#42070,#42072,.T.); +#42070 = VERTEX_POINT('',#42071); +#42071 = CARTESIAN_POINT('',(8.15,-7.89,0.4)); +#42072 = LINE('',#42073,#42074); +#42073 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#42074 = VECTOR('',#42075,1.); +#42075 = DIRECTION('',(-0.,-1.,-0.)); +#42076 = ORIENTED_EDGE('',*,*,#41992,.T.); +#42077 = ORIENTED_EDGE('',*,*,#42054,.F.); +#42078 = ORIENTED_EDGE('',*,*,#42079,.F.); +#42079 = EDGE_CURVE('',#42070,#42047,#42080,.T.); +#42080 = LINE('',#42081,#42082); +#42081 = CARTESIAN_POINT('',(8.15,-7.89,0.4)); +#42082 = VECTOR('',#42083,1.); +#42083 = DIRECTION('',(0.,0.,-1.)); +#42084 = PLANE('',#42085); +#42085 = AXIS2_PLACEMENT_3D('',#42086,#42087,#42088); +#42086 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#42087 = DIRECTION('',(1.,0.,0.)); +#42088 = DIRECTION('',(-0.,1.,0.)); +#42089 = ADVANCED_FACE('',(#42090),#42101,.F.); +#42090 = FACE_BOUND('',#42091,.T.); +#42091 = EDGE_LOOP('',(#42092,#42093,#42094,#42100)); +#42092 = ORIENTED_EDGE('',*,*,#41984,.T.); +#42093 = ORIENTED_EDGE('',*,*,#42069,.T.); +#42094 = ORIENTED_EDGE('',*,*,#42095,.F.); +#42095 = EDGE_CURVE('',#42015,#42070,#42096,.T.); +#42096 = LINE('',#42097,#42098); +#42097 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#42098 = VECTOR('',#42099,1.); +#42099 = DIRECTION('',(-1.,-0.,-0.)); +#42100 = ORIENTED_EDGE('',*,*,#42031,.F.); +#42101 = PLANE('',#42102); +#42102 = AXIS2_PLACEMENT_3D('',#42103,#42104,#42105); +#42103 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#42104 = DIRECTION('',(-0.,-0.,-1.)); +#42105 = DIRECTION('',(0.,1.,-0.)); +#42106 = ADVANCED_FACE('',(#42107),#42113,.F.); +#42107 = FACE_BOUND('',#42108,.T.); +#42108 = EDGE_LOOP('',(#42109,#42110,#42111,#42112)); +#42109 = ORIENTED_EDGE('',*,*,#42014,.F.); +#42110 = ORIENTED_EDGE('',*,*,#42095,.T.); +#42111 = ORIENTED_EDGE('',*,*,#42079,.T.); +#42112 = ORIENTED_EDGE('',*,*,#42046,.F.); +#42113 = PLANE('',#42114); +#42114 = AXIS2_PLACEMENT_3D('',#42115,#42116,#42117); +#42115 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#42116 = DIRECTION('',(0.,1.,0.)); +#42117 = DIRECTION('',(0.,-0.,1.)); +#42118 = ORIENTED_CLOSED_SHELL('',*,#42119,.F.); +#42119 = CLOSED_SHELL('',(#42120,#42160,#42191,#42215,#42239,#42256)); +#42120 = ADVANCED_FACE('',(#42121),#42155,.T.); +#42121 = FACE_BOUND('',#42122,.F.); +#42122 = EDGE_LOOP('',(#42123,#42133,#42141,#42149)); +#42123 = ORIENTED_EDGE('',*,*,#42124,.F.); +#42124 = EDGE_CURVE('',#42125,#42127,#42129,.T.); +#42125 = VERTEX_POINT('',#42126); +#42126 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#42127 = VERTEX_POINT('',#42128); +#42128 = CARTESIAN_POINT('',(8.550000119209,-5.72,0.399997961521)); +#42129 = LINE('',#42130,#42131); +#42130 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#42131 = VECTOR('',#42132,1.); +#42132 = DIRECTION('',(0.,0.,-1.)); +#42133 = ORIENTED_EDGE('',*,*,#42134,.T.); +#42134 = EDGE_CURVE('',#42125,#42135,#42137,.T.); +#42135 = VERTEX_POINT('',#42136); +#42136 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#42137 = LINE('',#42138,#42139); +#42138 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#42139 = VECTOR('',#42140,1.); +#42140 = DIRECTION('',(-1.,-0.,-0.)); +#42141 = ORIENTED_EDGE('',*,*,#42142,.T.); +#42142 = EDGE_CURVE('',#42135,#42143,#42145,.T.); +#42143 = VERTEX_POINT('',#42144); +#42144 = CARTESIAN_POINT('',(8.150000119209,-5.72,0.399998056888)); +#42145 = LINE('',#42146,#42147); +#42146 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#42147 = VECTOR('',#42148,1.); +#42148 = DIRECTION('',(0.,0.,-1.)); +#42149 = ORIENTED_EDGE('',*,*,#42150,.T.); +#42150 = EDGE_CURVE('',#42143,#42127,#42151,.T.); +#42151 = LINE('',#42152,#42153); +#42152 = CARTESIAN_POINT('',(8.150000119209,-5.72,0.399998056888)); +#42153 = VECTOR('',#42154,1.); +#42154 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42155 = PLANE('',#42156); +#42156 = AXIS2_PLACEMENT_3D('',#42157,#42158,#42159); +#42157 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#42158 = DIRECTION('',(0.,1.,0.)); +#42159 = DIRECTION('',(0.,-0.,1.)); +#42160 = ADVANCED_FACE('',(#42161),#42186,.T.); +#42161 = FACE_BOUND('',#42162,.T.); +#42162 = EDGE_LOOP('',(#42163,#42173,#42179,#42180)); +#42163 = ORIENTED_EDGE('',*,*,#42164,.T.); +#42164 = EDGE_CURVE('',#42165,#42167,#42169,.T.); +#42165 = VERTEX_POINT('',#42166); +#42166 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#42167 = VERTEX_POINT('',#42168); +#42168 = CARTESIAN_POINT('',(8.550000119209,-6.62,0.399997961521)); +#42169 = LINE('',#42170,#42171); +#42170 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#42171 = VECTOR('',#42172,1.); +#42172 = DIRECTION('',(0.,0.,-1.)); +#42173 = ORIENTED_EDGE('',*,*,#42174,.F.); +#42174 = EDGE_CURVE('',#42127,#42167,#42175,.T.); +#42175 = LINE('',#42176,#42177); +#42176 = CARTESIAN_POINT('',(8.550000119209,-5.72,0.399997961521)); +#42177 = VECTOR('',#42178,1.); +#42178 = DIRECTION('',(0.,-1.,0.)); +#42179 = ORIENTED_EDGE('',*,*,#42124,.F.); +#42180 = ORIENTED_EDGE('',*,*,#42181,.T.); +#42181 = EDGE_CURVE('',#42125,#42165,#42182,.T.); +#42182 = LINE('',#42183,#42184); +#42183 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#42184 = VECTOR('',#42185,1.); +#42185 = DIRECTION('',(-0.,-1.,-0.)); +#42186 = PLANE('',#42187); +#42187 = AXIS2_PLACEMENT_3D('',#42188,#42189,#42190); +#42188 = CARTESIAN_POINT('',(8.550000214576,-5.72,0.799997961521)); +#42189 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42190 = DIRECTION('',(0.,1.,0.)); +#42191 = ADVANCED_FACE('',(#42192),#42210,.F.); +#42192 = FACE_BOUND('',#42193,.T.); +#42193 = EDGE_LOOP('',(#42194,#42195,#42203,#42209)); +#42194 = ORIENTED_EDGE('',*,*,#42174,.T.); +#42195 = ORIENTED_EDGE('',*,*,#42196,.T.); +#42196 = EDGE_CURVE('',#42167,#42197,#42199,.T.); +#42197 = VERTEX_POINT('',#42198); +#42198 = CARTESIAN_POINT('',(8.150000119209,-6.62,0.399998056888)); +#42199 = LINE('',#42200,#42201); +#42200 = CARTESIAN_POINT('',(8.550000119209,-6.62,0.399997961521)); +#42201 = VECTOR('',#42202,1.); +#42202 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42203 = ORIENTED_EDGE('',*,*,#42204,.T.); +#42204 = EDGE_CURVE('',#42197,#42143,#42205,.T.); +#42205 = LINE('',#42206,#42207); +#42206 = CARTESIAN_POINT('',(8.150000119209,-6.62,0.399998056888)); +#42207 = VECTOR('',#42208,1.); +#42208 = DIRECTION('',(0.,1.,0.)); +#42209 = ORIENTED_EDGE('',*,*,#42150,.T.); +#42210 = PLANE('',#42211); +#42211 = AXIS2_PLACEMENT_3D('',#42212,#42213,#42214); +#42212 = CARTESIAN_POINT('',(8.350000119209,-6.17,0.399998009205)); +#42213 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42214 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42215 = ADVANCED_FACE('',(#42216),#42234,.F.); +#42216 = FACE_BOUND('',#42217,.T.); +#42217 = EDGE_LOOP('',(#42218,#42226,#42227,#42228)); +#42218 = ORIENTED_EDGE('',*,*,#42219,.F.); +#42219 = EDGE_CURVE('',#42135,#42220,#42222,.T.); +#42220 = VERTEX_POINT('',#42221); +#42221 = CARTESIAN_POINT('',(8.15,-6.62,0.4)); +#42222 = LINE('',#42223,#42224); +#42223 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#42224 = VECTOR('',#42225,1.); +#42225 = DIRECTION('',(-0.,-1.,-0.)); +#42226 = ORIENTED_EDGE('',*,*,#42142,.T.); +#42227 = ORIENTED_EDGE('',*,*,#42204,.F.); +#42228 = ORIENTED_EDGE('',*,*,#42229,.F.); +#42229 = EDGE_CURVE('',#42220,#42197,#42230,.T.); +#42230 = LINE('',#42231,#42232); +#42231 = CARTESIAN_POINT('',(8.15,-6.62,0.4)); +#42232 = VECTOR('',#42233,1.); +#42233 = DIRECTION('',(0.,0.,-1.)); +#42234 = PLANE('',#42235); +#42235 = AXIS2_PLACEMENT_3D('',#42236,#42237,#42238); +#42236 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#42237 = DIRECTION('',(1.,0.,0.)); +#42238 = DIRECTION('',(-0.,1.,0.)); +#42239 = ADVANCED_FACE('',(#42240),#42251,.F.); +#42240 = FACE_BOUND('',#42241,.T.); +#42241 = EDGE_LOOP('',(#42242,#42243,#42244,#42250)); +#42242 = ORIENTED_EDGE('',*,*,#42134,.T.); +#42243 = ORIENTED_EDGE('',*,*,#42219,.T.); +#42244 = ORIENTED_EDGE('',*,*,#42245,.F.); +#42245 = EDGE_CURVE('',#42165,#42220,#42246,.T.); +#42246 = LINE('',#42247,#42248); +#42247 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#42248 = VECTOR('',#42249,1.); +#42249 = DIRECTION('',(-1.,-0.,-0.)); +#42250 = ORIENTED_EDGE('',*,*,#42181,.F.); +#42251 = PLANE('',#42252); +#42252 = AXIS2_PLACEMENT_3D('',#42253,#42254,#42255); +#42253 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#42254 = DIRECTION('',(-0.,-0.,-1.)); +#42255 = DIRECTION('',(0.,1.,-0.)); +#42256 = ADVANCED_FACE('',(#42257),#42263,.F.); +#42257 = FACE_BOUND('',#42258,.T.); +#42258 = EDGE_LOOP('',(#42259,#42260,#42261,#42262)); +#42259 = ORIENTED_EDGE('',*,*,#42164,.F.); +#42260 = ORIENTED_EDGE('',*,*,#42245,.T.); +#42261 = ORIENTED_EDGE('',*,*,#42229,.T.); +#42262 = ORIENTED_EDGE('',*,*,#42196,.F.); +#42263 = PLANE('',#42264); +#42264 = AXIS2_PLACEMENT_3D('',#42265,#42266,#42267); +#42265 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#42266 = DIRECTION('',(0.,1.,0.)); +#42267 = DIRECTION('',(0.,-0.,1.)); +#42268 = ORIENTED_CLOSED_SHELL('',*,#42269,.F.); +#42269 = CLOSED_SHELL('',(#42270,#42310,#42341,#42365,#42389,#42406)); +#42270 = ADVANCED_FACE('',(#42271),#42305,.T.); +#42271 = FACE_BOUND('',#42272,.F.); +#42272 = EDGE_LOOP('',(#42273,#42283,#42291,#42299)); +#42273 = ORIENTED_EDGE('',*,*,#42274,.F.); +#42274 = EDGE_CURVE('',#42275,#42277,#42279,.T.); +#42275 = VERTEX_POINT('',#42276); +#42276 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#42277 = VERTEX_POINT('',#42278); +#42278 = CARTESIAN_POINT('',(8.550000119209,-4.45,0.399997961521)); +#42279 = LINE('',#42280,#42281); +#42280 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#42281 = VECTOR('',#42282,1.); +#42282 = DIRECTION('',(0.,0.,-1.)); +#42283 = ORIENTED_EDGE('',*,*,#42284,.T.); +#42284 = EDGE_CURVE('',#42275,#42285,#42287,.T.); +#42285 = VERTEX_POINT('',#42286); +#42286 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#42287 = LINE('',#42288,#42289); +#42288 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#42289 = VECTOR('',#42290,1.); +#42290 = DIRECTION('',(-1.,-0.,-0.)); +#42291 = ORIENTED_EDGE('',*,*,#42292,.T.); +#42292 = EDGE_CURVE('',#42285,#42293,#42295,.T.); +#42293 = VERTEX_POINT('',#42294); +#42294 = CARTESIAN_POINT('',(8.150000119209,-4.45,0.399998056888)); +#42295 = LINE('',#42296,#42297); +#42296 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#42297 = VECTOR('',#42298,1.); +#42298 = DIRECTION('',(0.,0.,-1.)); +#42299 = ORIENTED_EDGE('',*,*,#42300,.T.); +#42300 = EDGE_CURVE('',#42293,#42277,#42301,.T.); +#42301 = LINE('',#42302,#42303); +#42302 = CARTESIAN_POINT('',(8.150000119209,-4.45,0.399998056888)); +#42303 = VECTOR('',#42304,1.); +#42304 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42305 = PLANE('',#42306); +#42306 = AXIS2_PLACEMENT_3D('',#42307,#42308,#42309); +#42307 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#42308 = DIRECTION('',(0.,1.,0.)); +#42309 = DIRECTION('',(0.,-0.,1.)); +#42310 = ADVANCED_FACE('',(#42311),#42336,.T.); +#42311 = FACE_BOUND('',#42312,.T.); +#42312 = EDGE_LOOP('',(#42313,#42323,#42329,#42330)); +#42313 = ORIENTED_EDGE('',*,*,#42314,.T.); +#42314 = EDGE_CURVE('',#42315,#42317,#42319,.T.); +#42315 = VERTEX_POINT('',#42316); +#42316 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#42317 = VERTEX_POINT('',#42318); +#42318 = CARTESIAN_POINT('',(8.550000119209,-5.35,0.399997961521)); +#42319 = LINE('',#42320,#42321); +#42320 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#42321 = VECTOR('',#42322,1.); +#42322 = DIRECTION('',(0.,0.,-1.)); +#42323 = ORIENTED_EDGE('',*,*,#42324,.F.); +#42324 = EDGE_CURVE('',#42277,#42317,#42325,.T.); +#42325 = LINE('',#42326,#42327); +#42326 = CARTESIAN_POINT('',(8.550000119209,-4.45,0.399997961521)); +#42327 = VECTOR('',#42328,1.); +#42328 = DIRECTION('',(0.,-1.,0.)); +#42329 = ORIENTED_EDGE('',*,*,#42274,.F.); +#42330 = ORIENTED_EDGE('',*,*,#42331,.T.); +#42331 = EDGE_CURVE('',#42275,#42315,#42332,.T.); +#42332 = LINE('',#42333,#42334); +#42333 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#42334 = VECTOR('',#42335,1.); +#42335 = DIRECTION('',(-0.,-1.,-0.)); +#42336 = PLANE('',#42337); +#42337 = AXIS2_PLACEMENT_3D('',#42338,#42339,#42340); +#42338 = CARTESIAN_POINT('',(8.550000214576,-4.45,0.799997961521)); +#42339 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42340 = DIRECTION('',(0.,1.,0.)); +#42341 = ADVANCED_FACE('',(#42342),#42360,.F.); +#42342 = FACE_BOUND('',#42343,.T.); +#42343 = EDGE_LOOP('',(#42344,#42345,#42353,#42359)); +#42344 = ORIENTED_EDGE('',*,*,#42324,.T.); +#42345 = ORIENTED_EDGE('',*,*,#42346,.T.); +#42346 = EDGE_CURVE('',#42317,#42347,#42349,.T.); +#42347 = VERTEX_POINT('',#42348); +#42348 = CARTESIAN_POINT('',(8.150000119209,-5.35,0.399998056888)); +#42349 = LINE('',#42350,#42351); +#42350 = CARTESIAN_POINT('',(8.550000119209,-5.35,0.399997961521)); +#42351 = VECTOR('',#42352,1.); +#42352 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42353 = ORIENTED_EDGE('',*,*,#42354,.T.); +#42354 = EDGE_CURVE('',#42347,#42293,#42355,.T.); +#42355 = LINE('',#42356,#42357); +#42356 = CARTESIAN_POINT('',(8.150000119209,-5.35,0.399998056888)); +#42357 = VECTOR('',#42358,1.); +#42358 = DIRECTION('',(0.,1.,0.)); +#42359 = ORIENTED_EDGE('',*,*,#42300,.T.); +#42360 = PLANE('',#42361); +#42361 = AXIS2_PLACEMENT_3D('',#42362,#42363,#42364); +#42362 = CARTESIAN_POINT('',(8.350000119209,-4.9,0.399998009205)); +#42363 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42364 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42365 = ADVANCED_FACE('',(#42366),#42384,.F.); +#42366 = FACE_BOUND('',#42367,.T.); +#42367 = EDGE_LOOP('',(#42368,#42376,#42377,#42378)); +#42368 = ORIENTED_EDGE('',*,*,#42369,.F.); +#42369 = EDGE_CURVE('',#42285,#42370,#42372,.T.); +#42370 = VERTEX_POINT('',#42371); +#42371 = CARTESIAN_POINT('',(8.15,-5.35,0.4)); +#42372 = LINE('',#42373,#42374); +#42373 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#42374 = VECTOR('',#42375,1.); +#42375 = DIRECTION('',(-0.,-1.,-0.)); +#42376 = ORIENTED_EDGE('',*,*,#42292,.T.); +#42377 = ORIENTED_EDGE('',*,*,#42354,.F.); +#42378 = ORIENTED_EDGE('',*,*,#42379,.F.); +#42379 = EDGE_CURVE('',#42370,#42347,#42380,.T.); +#42380 = LINE('',#42381,#42382); +#42381 = CARTESIAN_POINT('',(8.15,-5.35,0.4)); +#42382 = VECTOR('',#42383,1.); +#42383 = DIRECTION('',(0.,0.,-1.)); +#42384 = PLANE('',#42385); +#42385 = AXIS2_PLACEMENT_3D('',#42386,#42387,#42388); +#42386 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#42387 = DIRECTION('',(1.,0.,0.)); +#42388 = DIRECTION('',(-0.,1.,0.)); +#42389 = ADVANCED_FACE('',(#42390),#42401,.F.); +#42390 = FACE_BOUND('',#42391,.T.); +#42391 = EDGE_LOOP('',(#42392,#42393,#42394,#42400)); +#42392 = ORIENTED_EDGE('',*,*,#42284,.T.); +#42393 = ORIENTED_EDGE('',*,*,#42369,.T.); +#42394 = ORIENTED_EDGE('',*,*,#42395,.F.); +#42395 = EDGE_CURVE('',#42315,#42370,#42396,.T.); +#42396 = LINE('',#42397,#42398); +#42397 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#42398 = VECTOR('',#42399,1.); +#42399 = DIRECTION('',(-1.,-0.,-0.)); +#42400 = ORIENTED_EDGE('',*,*,#42331,.F.); +#42401 = PLANE('',#42402); +#42402 = AXIS2_PLACEMENT_3D('',#42403,#42404,#42405); +#42403 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#42404 = DIRECTION('',(-0.,-0.,-1.)); +#42405 = DIRECTION('',(0.,1.,-0.)); +#42406 = ADVANCED_FACE('',(#42407),#42413,.F.); +#42407 = FACE_BOUND('',#42408,.T.); +#42408 = EDGE_LOOP('',(#42409,#42410,#42411,#42412)); +#42409 = ORIENTED_EDGE('',*,*,#42314,.F.); +#42410 = ORIENTED_EDGE('',*,*,#42395,.T.); +#42411 = ORIENTED_EDGE('',*,*,#42379,.T.); +#42412 = ORIENTED_EDGE('',*,*,#42346,.F.); +#42413 = PLANE('',#42414); +#42414 = AXIS2_PLACEMENT_3D('',#42415,#42416,#42417); +#42415 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#42416 = DIRECTION('',(0.,1.,0.)); +#42417 = DIRECTION('',(0.,-0.,1.)); +#42418 = ORIENTED_CLOSED_SHELL('',*,#42419,.F.); +#42419 = CLOSED_SHELL('',(#42420,#42460,#42491,#42515,#42539,#42556)); +#42420 = ADVANCED_FACE('',(#42421),#42455,.T.); +#42421 = FACE_BOUND('',#42422,.F.); +#42422 = EDGE_LOOP('',(#42423,#42433,#42441,#42449)); +#42423 = ORIENTED_EDGE('',*,*,#42424,.F.); +#42424 = EDGE_CURVE('',#42425,#42427,#42429,.T.); +#42425 = VERTEX_POINT('',#42426); +#42426 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#42427 = VERTEX_POINT('',#42428); +#42428 = CARTESIAN_POINT('',(8.550000119209,-3.18,0.399997961521)); +#42429 = LINE('',#42430,#42431); +#42430 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#42431 = VECTOR('',#42432,1.); +#42432 = DIRECTION('',(0.,0.,-1.)); +#42433 = ORIENTED_EDGE('',*,*,#42434,.T.); +#42434 = EDGE_CURVE('',#42425,#42435,#42437,.T.); +#42435 = VERTEX_POINT('',#42436); +#42436 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#42437 = LINE('',#42438,#42439); +#42438 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#42439 = VECTOR('',#42440,1.); +#42440 = DIRECTION('',(-1.,-0.,-0.)); +#42441 = ORIENTED_EDGE('',*,*,#42442,.T.); +#42442 = EDGE_CURVE('',#42435,#42443,#42445,.T.); +#42443 = VERTEX_POINT('',#42444); +#42444 = CARTESIAN_POINT('',(8.150000119209,-3.18,0.399998056888)); +#42445 = LINE('',#42446,#42447); +#42446 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#42447 = VECTOR('',#42448,1.); +#42448 = DIRECTION('',(0.,0.,-1.)); +#42449 = ORIENTED_EDGE('',*,*,#42450,.T.); +#42450 = EDGE_CURVE('',#42443,#42427,#42451,.T.); +#42451 = LINE('',#42452,#42453); +#42452 = CARTESIAN_POINT('',(8.150000119209,-3.18,0.399998056888)); +#42453 = VECTOR('',#42454,1.); +#42454 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42455 = PLANE('',#42456); +#42456 = AXIS2_PLACEMENT_3D('',#42457,#42458,#42459); +#42457 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#42458 = DIRECTION('',(0.,1.,0.)); +#42459 = DIRECTION('',(0.,-0.,1.)); +#42460 = ADVANCED_FACE('',(#42461),#42486,.T.); +#42461 = FACE_BOUND('',#42462,.T.); +#42462 = EDGE_LOOP('',(#42463,#42473,#42479,#42480)); +#42463 = ORIENTED_EDGE('',*,*,#42464,.T.); +#42464 = EDGE_CURVE('',#42465,#42467,#42469,.T.); +#42465 = VERTEX_POINT('',#42466); +#42466 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#42467 = VERTEX_POINT('',#42468); +#42468 = CARTESIAN_POINT('',(8.550000119209,-4.08,0.399997961521)); +#42469 = LINE('',#42470,#42471); +#42470 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#42471 = VECTOR('',#42472,1.); +#42472 = DIRECTION('',(0.,0.,-1.)); +#42473 = ORIENTED_EDGE('',*,*,#42474,.F.); +#42474 = EDGE_CURVE('',#42427,#42467,#42475,.T.); +#42475 = LINE('',#42476,#42477); +#42476 = CARTESIAN_POINT('',(8.550000119209,-3.18,0.399997961521)); +#42477 = VECTOR('',#42478,1.); +#42478 = DIRECTION('',(0.,-1.,0.)); +#42479 = ORIENTED_EDGE('',*,*,#42424,.F.); +#42480 = ORIENTED_EDGE('',*,*,#42481,.T.); +#42481 = EDGE_CURVE('',#42425,#42465,#42482,.T.); +#42482 = LINE('',#42483,#42484); +#42483 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#42484 = VECTOR('',#42485,1.); +#42485 = DIRECTION('',(-0.,-1.,-0.)); +#42486 = PLANE('',#42487); +#42487 = AXIS2_PLACEMENT_3D('',#42488,#42489,#42490); +#42488 = CARTESIAN_POINT('',(8.550000214576,-3.18,0.799997961521)); +#42489 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42490 = DIRECTION('',(0.,1.,0.)); +#42491 = ADVANCED_FACE('',(#42492),#42510,.F.); +#42492 = FACE_BOUND('',#42493,.T.); +#42493 = EDGE_LOOP('',(#42494,#42495,#42503,#42509)); +#42494 = ORIENTED_EDGE('',*,*,#42474,.T.); +#42495 = ORIENTED_EDGE('',*,*,#42496,.T.); +#42496 = EDGE_CURVE('',#42467,#42497,#42499,.T.); +#42497 = VERTEX_POINT('',#42498); +#42498 = CARTESIAN_POINT('',(8.150000119209,-4.08,0.399998056888)); +#42499 = LINE('',#42500,#42501); +#42500 = CARTESIAN_POINT('',(8.550000119209,-4.08,0.399997961521)); +#42501 = VECTOR('',#42502,1.); +#42502 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42503 = ORIENTED_EDGE('',*,*,#42504,.T.); +#42504 = EDGE_CURVE('',#42497,#42443,#42505,.T.); +#42505 = LINE('',#42506,#42507); +#42506 = CARTESIAN_POINT('',(8.150000119209,-4.08,0.399998056888)); +#42507 = VECTOR('',#42508,1.); +#42508 = DIRECTION('',(0.,1.,0.)); +#42509 = ORIENTED_EDGE('',*,*,#42450,.T.); +#42510 = PLANE('',#42511); +#42511 = AXIS2_PLACEMENT_3D('',#42512,#42513,#42514); +#42512 = CARTESIAN_POINT('',(8.350000119209,-3.63,0.399998009205)); +#42513 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42514 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42515 = ADVANCED_FACE('',(#42516),#42534,.F.); +#42516 = FACE_BOUND('',#42517,.T.); +#42517 = EDGE_LOOP('',(#42518,#42526,#42527,#42528)); +#42518 = ORIENTED_EDGE('',*,*,#42519,.F.); +#42519 = EDGE_CURVE('',#42435,#42520,#42522,.T.); +#42520 = VERTEX_POINT('',#42521); +#42521 = CARTESIAN_POINT('',(8.15,-4.08,0.4)); +#42522 = LINE('',#42523,#42524); +#42523 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#42524 = VECTOR('',#42525,1.); +#42525 = DIRECTION('',(-0.,-1.,-0.)); +#42526 = ORIENTED_EDGE('',*,*,#42442,.T.); +#42527 = ORIENTED_EDGE('',*,*,#42504,.F.); +#42528 = ORIENTED_EDGE('',*,*,#42529,.F.); +#42529 = EDGE_CURVE('',#42520,#42497,#42530,.T.); +#42530 = LINE('',#42531,#42532); +#42531 = CARTESIAN_POINT('',(8.15,-4.08,0.4)); +#42532 = VECTOR('',#42533,1.); +#42533 = DIRECTION('',(0.,0.,-1.)); +#42534 = PLANE('',#42535); +#42535 = AXIS2_PLACEMENT_3D('',#42536,#42537,#42538); +#42536 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#42537 = DIRECTION('',(1.,0.,0.)); +#42538 = DIRECTION('',(-0.,1.,0.)); +#42539 = ADVANCED_FACE('',(#42540),#42551,.F.); +#42540 = FACE_BOUND('',#42541,.T.); +#42541 = EDGE_LOOP('',(#42542,#42543,#42544,#42550)); +#42542 = ORIENTED_EDGE('',*,*,#42434,.T.); +#42543 = ORIENTED_EDGE('',*,*,#42519,.T.); +#42544 = ORIENTED_EDGE('',*,*,#42545,.F.); +#42545 = EDGE_CURVE('',#42465,#42520,#42546,.T.); +#42546 = LINE('',#42547,#42548); +#42547 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#42548 = VECTOR('',#42549,1.); +#42549 = DIRECTION('',(-1.,-0.,-0.)); +#42550 = ORIENTED_EDGE('',*,*,#42481,.F.); +#42551 = PLANE('',#42552); +#42552 = AXIS2_PLACEMENT_3D('',#42553,#42554,#42555); +#42553 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#42554 = DIRECTION('',(-0.,-0.,-1.)); +#42555 = DIRECTION('',(0.,1.,-0.)); +#42556 = ADVANCED_FACE('',(#42557),#42563,.F.); +#42557 = FACE_BOUND('',#42558,.T.); +#42558 = EDGE_LOOP('',(#42559,#42560,#42561,#42562)); +#42559 = ORIENTED_EDGE('',*,*,#42464,.F.); +#42560 = ORIENTED_EDGE('',*,*,#42545,.T.); +#42561 = ORIENTED_EDGE('',*,*,#42529,.T.); +#42562 = ORIENTED_EDGE('',*,*,#42496,.F.); +#42563 = PLANE('',#42564); +#42564 = AXIS2_PLACEMENT_3D('',#42565,#42566,#42567); +#42565 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#42566 = DIRECTION('',(0.,1.,0.)); +#42567 = DIRECTION('',(0.,-0.,1.)); +#42568 = ORIENTED_CLOSED_SHELL('',*,#42569,.F.); +#42569 = CLOSED_SHELL('',(#42570,#42610,#42641,#42665,#42689,#42706)); +#42570 = ADVANCED_FACE('',(#42571),#42605,.T.); +#42571 = FACE_BOUND('',#42572,.F.); +#42572 = EDGE_LOOP('',(#42573,#42583,#42591,#42599)); +#42573 = ORIENTED_EDGE('',*,*,#42574,.F.); +#42574 = EDGE_CURVE('',#42575,#42577,#42579,.T.); +#42575 = VERTEX_POINT('',#42576); +#42576 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#42577 = VERTEX_POINT('',#42578); +#42578 = CARTESIAN_POINT('',(8.550000119209,-1.91,0.399997961521)); +#42579 = LINE('',#42580,#42581); +#42580 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#42581 = VECTOR('',#42582,1.); +#42582 = DIRECTION('',(0.,0.,-1.)); +#42583 = ORIENTED_EDGE('',*,*,#42584,.T.); +#42584 = EDGE_CURVE('',#42575,#42585,#42587,.T.); +#42585 = VERTEX_POINT('',#42586); +#42586 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#42587 = LINE('',#42588,#42589); +#42588 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#42589 = VECTOR('',#42590,1.); +#42590 = DIRECTION('',(-1.,-0.,-0.)); +#42591 = ORIENTED_EDGE('',*,*,#42592,.T.); +#42592 = EDGE_CURVE('',#42585,#42593,#42595,.T.); +#42593 = VERTEX_POINT('',#42594); +#42594 = CARTESIAN_POINT('',(8.150000119209,-1.91,0.399998056888)); +#42595 = LINE('',#42596,#42597); +#42596 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#42597 = VECTOR('',#42598,1.); +#42598 = DIRECTION('',(0.,0.,-1.)); +#42599 = ORIENTED_EDGE('',*,*,#42600,.T.); +#42600 = EDGE_CURVE('',#42593,#42577,#42601,.T.); +#42601 = LINE('',#42602,#42603); +#42602 = CARTESIAN_POINT('',(8.150000119209,-1.91,0.399998056888)); +#42603 = VECTOR('',#42604,1.); +#42604 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42605 = PLANE('',#42606); +#42606 = AXIS2_PLACEMENT_3D('',#42607,#42608,#42609); +#42607 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#42608 = DIRECTION('',(0.,1.,0.)); +#42609 = DIRECTION('',(0.,-0.,1.)); +#42610 = ADVANCED_FACE('',(#42611),#42636,.T.); +#42611 = FACE_BOUND('',#42612,.T.); +#42612 = EDGE_LOOP('',(#42613,#42623,#42629,#42630)); +#42613 = ORIENTED_EDGE('',*,*,#42614,.T.); +#42614 = EDGE_CURVE('',#42615,#42617,#42619,.T.); +#42615 = VERTEX_POINT('',#42616); +#42616 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#42617 = VERTEX_POINT('',#42618); +#42618 = CARTESIAN_POINT('',(8.550000119209,-2.81,0.399997961521)); +#42619 = LINE('',#42620,#42621); +#42620 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#42621 = VECTOR('',#42622,1.); +#42622 = DIRECTION('',(0.,0.,-1.)); +#42623 = ORIENTED_EDGE('',*,*,#42624,.F.); +#42624 = EDGE_CURVE('',#42577,#42617,#42625,.T.); +#42625 = LINE('',#42626,#42627); +#42626 = CARTESIAN_POINT('',(8.550000119209,-1.91,0.399997961521)); +#42627 = VECTOR('',#42628,1.); +#42628 = DIRECTION('',(0.,-1.,0.)); +#42629 = ORIENTED_EDGE('',*,*,#42574,.F.); +#42630 = ORIENTED_EDGE('',*,*,#42631,.T.); +#42631 = EDGE_CURVE('',#42575,#42615,#42632,.T.); +#42632 = LINE('',#42633,#42634); +#42633 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#42634 = VECTOR('',#42635,1.); +#42635 = DIRECTION('',(-0.,-1.,-0.)); +#42636 = PLANE('',#42637); +#42637 = AXIS2_PLACEMENT_3D('',#42638,#42639,#42640); +#42638 = CARTESIAN_POINT('',(8.550000214576,-1.91,0.799997961521)); +#42639 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42640 = DIRECTION('',(0.,1.,0.)); +#42641 = ADVANCED_FACE('',(#42642),#42660,.F.); +#42642 = FACE_BOUND('',#42643,.T.); +#42643 = EDGE_LOOP('',(#42644,#42645,#42653,#42659)); +#42644 = ORIENTED_EDGE('',*,*,#42624,.T.); +#42645 = ORIENTED_EDGE('',*,*,#42646,.T.); +#42646 = EDGE_CURVE('',#42617,#42647,#42649,.T.); +#42647 = VERTEX_POINT('',#42648); +#42648 = CARTESIAN_POINT('',(8.150000119209,-2.81,0.399998056888)); +#42649 = LINE('',#42650,#42651); +#42650 = CARTESIAN_POINT('',(8.550000119209,-2.81,0.399997961521)); +#42651 = VECTOR('',#42652,1.); +#42652 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42653 = ORIENTED_EDGE('',*,*,#42654,.T.); +#42654 = EDGE_CURVE('',#42647,#42593,#42655,.T.); +#42655 = LINE('',#42656,#42657); +#42656 = CARTESIAN_POINT('',(8.150000119209,-2.81,0.399998056888)); +#42657 = VECTOR('',#42658,1.); +#42658 = DIRECTION('',(0.,1.,0.)); +#42659 = ORIENTED_EDGE('',*,*,#42600,.T.); +#42660 = PLANE('',#42661); +#42661 = AXIS2_PLACEMENT_3D('',#42662,#42663,#42664); +#42662 = CARTESIAN_POINT('',(8.350000119209,-2.36,0.399998009205)); +#42663 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42664 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42665 = ADVANCED_FACE('',(#42666),#42684,.F.); +#42666 = FACE_BOUND('',#42667,.T.); +#42667 = EDGE_LOOP('',(#42668,#42676,#42677,#42678)); +#42668 = ORIENTED_EDGE('',*,*,#42669,.F.); +#42669 = EDGE_CURVE('',#42585,#42670,#42672,.T.); +#42670 = VERTEX_POINT('',#42671); +#42671 = CARTESIAN_POINT('',(8.15,-2.81,0.4)); +#42672 = LINE('',#42673,#42674); +#42673 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#42674 = VECTOR('',#42675,1.); +#42675 = DIRECTION('',(-0.,-1.,-0.)); +#42676 = ORIENTED_EDGE('',*,*,#42592,.T.); +#42677 = ORIENTED_EDGE('',*,*,#42654,.F.); +#42678 = ORIENTED_EDGE('',*,*,#42679,.F.); +#42679 = EDGE_CURVE('',#42670,#42647,#42680,.T.); +#42680 = LINE('',#42681,#42682); +#42681 = CARTESIAN_POINT('',(8.15,-2.81,0.4)); +#42682 = VECTOR('',#42683,1.); +#42683 = DIRECTION('',(0.,0.,-1.)); +#42684 = PLANE('',#42685); +#42685 = AXIS2_PLACEMENT_3D('',#42686,#42687,#42688); +#42686 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#42687 = DIRECTION('',(1.,0.,0.)); +#42688 = DIRECTION('',(-0.,1.,0.)); +#42689 = ADVANCED_FACE('',(#42690),#42701,.F.); +#42690 = FACE_BOUND('',#42691,.T.); +#42691 = EDGE_LOOP('',(#42692,#42693,#42694,#42700)); +#42692 = ORIENTED_EDGE('',*,*,#42584,.T.); +#42693 = ORIENTED_EDGE('',*,*,#42669,.T.); +#42694 = ORIENTED_EDGE('',*,*,#42695,.F.); +#42695 = EDGE_CURVE('',#42615,#42670,#42696,.T.); +#42696 = LINE('',#42697,#42698); +#42697 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#42698 = VECTOR('',#42699,1.); +#42699 = DIRECTION('',(-1.,-0.,-0.)); +#42700 = ORIENTED_EDGE('',*,*,#42631,.F.); +#42701 = PLANE('',#42702); +#42702 = AXIS2_PLACEMENT_3D('',#42703,#42704,#42705); +#42703 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#42704 = DIRECTION('',(-0.,-0.,-1.)); +#42705 = DIRECTION('',(0.,1.,-0.)); +#42706 = ADVANCED_FACE('',(#42707),#42713,.F.); +#42707 = FACE_BOUND('',#42708,.T.); +#42708 = EDGE_LOOP('',(#42709,#42710,#42711,#42712)); +#42709 = ORIENTED_EDGE('',*,*,#42614,.F.); +#42710 = ORIENTED_EDGE('',*,*,#42695,.T.); +#42711 = ORIENTED_EDGE('',*,*,#42679,.T.); +#42712 = ORIENTED_EDGE('',*,*,#42646,.F.); +#42713 = PLANE('',#42714); +#42714 = AXIS2_PLACEMENT_3D('',#42715,#42716,#42717); +#42715 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#42716 = DIRECTION('',(0.,1.,0.)); +#42717 = DIRECTION('',(0.,-0.,1.)); +#42718 = ORIENTED_CLOSED_SHELL('',*,#42719,.F.); +#42719 = CLOSED_SHELL('',(#42720,#42760,#42791,#42815,#42839,#42856)); +#42720 = ADVANCED_FACE('',(#42721),#42755,.T.); +#42721 = FACE_BOUND('',#42722,.F.); +#42722 = EDGE_LOOP('',(#42723,#42733,#42741,#42749)); +#42723 = ORIENTED_EDGE('',*,*,#42724,.F.); +#42724 = EDGE_CURVE('',#42725,#42727,#42729,.T.); +#42725 = VERTEX_POINT('',#42726); +#42726 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#42727 = VERTEX_POINT('',#42728); +#42728 = CARTESIAN_POINT('',(8.550000119209,-0.64,0.399997961521)); +#42729 = LINE('',#42730,#42731); +#42730 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#42731 = VECTOR('',#42732,1.); +#42732 = DIRECTION('',(0.,0.,-1.)); +#42733 = ORIENTED_EDGE('',*,*,#42734,.T.); +#42734 = EDGE_CURVE('',#42725,#42735,#42737,.T.); +#42735 = VERTEX_POINT('',#42736); +#42736 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#42737 = LINE('',#42738,#42739); +#42738 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#42739 = VECTOR('',#42740,1.); +#42740 = DIRECTION('',(-1.,-0.,-0.)); +#42741 = ORIENTED_EDGE('',*,*,#42742,.T.); +#42742 = EDGE_CURVE('',#42735,#42743,#42745,.T.); +#42743 = VERTEX_POINT('',#42744); +#42744 = CARTESIAN_POINT('',(8.150000119209,-0.64,0.399998056888)); +#42745 = LINE('',#42746,#42747); +#42746 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#42747 = VECTOR('',#42748,1.); +#42748 = DIRECTION('',(0.,0.,-1.)); +#42749 = ORIENTED_EDGE('',*,*,#42750,.T.); +#42750 = EDGE_CURVE('',#42743,#42727,#42751,.T.); +#42751 = LINE('',#42752,#42753); +#42752 = CARTESIAN_POINT('',(8.150000119209,-0.64,0.399998056888)); +#42753 = VECTOR('',#42754,1.); +#42754 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42755 = PLANE('',#42756); +#42756 = AXIS2_PLACEMENT_3D('',#42757,#42758,#42759); +#42757 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#42758 = DIRECTION('',(0.,1.,0.)); +#42759 = DIRECTION('',(0.,-0.,1.)); +#42760 = ADVANCED_FACE('',(#42761),#42786,.T.); +#42761 = FACE_BOUND('',#42762,.T.); +#42762 = EDGE_LOOP('',(#42763,#42773,#42779,#42780)); +#42763 = ORIENTED_EDGE('',*,*,#42764,.T.); +#42764 = EDGE_CURVE('',#42765,#42767,#42769,.T.); +#42765 = VERTEX_POINT('',#42766); +#42766 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#42767 = VERTEX_POINT('',#42768); +#42768 = CARTESIAN_POINT('',(8.550000119209,-1.54,0.399997961521)); +#42769 = LINE('',#42770,#42771); +#42770 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#42771 = VECTOR('',#42772,1.); +#42772 = DIRECTION('',(0.,0.,-1.)); +#42773 = ORIENTED_EDGE('',*,*,#42774,.F.); +#42774 = EDGE_CURVE('',#42727,#42767,#42775,.T.); +#42775 = LINE('',#42776,#42777); +#42776 = CARTESIAN_POINT('',(8.550000119209,-0.64,0.399997961521)); +#42777 = VECTOR('',#42778,1.); +#42778 = DIRECTION('',(0.,-1.,0.)); +#42779 = ORIENTED_EDGE('',*,*,#42724,.F.); +#42780 = ORIENTED_EDGE('',*,*,#42781,.T.); +#42781 = EDGE_CURVE('',#42725,#42765,#42782,.T.); +#42782 = LINE('',#42783,#42784); +#42783 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#42784 = VECTOR('',#42785,1.); +#42785 = DIRECTION('',(-0.,-1.,-0.)); +#42786 = PLANE('',#42787); +#42787 = AXIS2_PLACEMENT_3D('',#42788,#42789,#42790); +#42788 = CARTESIAN_POINT('',(8.550000214576,-0.64,0.799997961521)); +#42789 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42790 = DIRECTION('',(0.,1.,0.)); +#42791 = ADVANCED_FACE('',(#42792),#42810,.F.); +#42792 = FACE_BOUND('',#42793,.T.); +#42793 = EDGE_LOOP('',(#42794,#42795,#42803,#42809)); +#42794 = ORIENTED_EDGE('',*,*,#42774,.T.); +#42795 = ORIENTED_EDGE('',*,*,#42796,.T.); +#42796 = EDGE_CURVE('',#42767,#42797,#42799,.T.); +#42797 = VERTEX_POINT('',#42798); +#42798 = CARTESIAN_POINT('',(8.150000119209,-1.54,0.399998056888)); +#42799 = LINE('',#42800,#42801); +#42800 = CARTESIAN_POINT('',(8.550000119209,-1.54,0.399997961521)); +#42801 = VECTOR('',#42802,1.); +#42802 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42803 = ORIENTED_EDGE('',*,*,#42804,.T.); +#42804 = EDGE_CURVE('',#42797,#42743,#42805,.T.); +#42805 = LINE('',#42806,#42807); +#42806 = CARTESIAN_POINT('',(8.150000119209,-1.54,0.399998056888)); +#42807 = VECTOR('',#42808,1.); +#42808 = DIRECTION('',(0.,1.,0.)); +#42809 = ORIENTED_EDGE('',*,*,#42750,.T.); +#42810 = PLANE('',#42811); +#42811 = AXIS2_PLACEMENT_3D('',#42812,#42813,#42814); +#42812 = CARTESIAN_POINT('',(8.350000119209,-1.09,0.399998009205)); +#42813 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42814 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42815 = ADVANCED_FACE('',(#42816),#42834,.F.); +#42816 = FACE_BOUND('',#42817,.T.); +#42817 = EDGE_LOOP('',(#42818,#42826,#42827,#42828)); +#42818 = ORIENTED_EDGE('',*,*,#42819,.F.); +#42819 = EDGE_CURVE('',#42735,#42820,#42822,.T.); +#42820 = VERTEX_POINT('',#42821); +#42821 = CARTESIAN_POINT('',(8.15,-1.54,0.4)); +#42822 = LINE('',#42823,#42824); +#42823 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#42824 = VECTOR('',#42825,1.); +#42825 = DIRECTION('',(-0.,-1.,-0.)); +#42826 = ORIENTED_EDGE('',*,*,#42742,.T.); +#42827 = ORIENTED_EDGE('',*,*,#42804,.F.); +#42828 = ORIENTED_EDGE('',*,*,#42829,.F.); +#42829 = EDGE_CURVE('',#42820,#42797,#42830,.T.); +#42830 = LINE('',#42831,#42832); +#42831 = CARTESIAN_POINT('',(8.15,-1.54,0.4)); +#42832 = VECTOR('',#42833,1.); +#42833 = DIRECTION('',(0.,0.,-1.)); +#42834 = PLANE('',#42835); +#42835 = AXIS2_PLACEMENT_3D('',#42836,#42837,#42838); +#42836 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#42837 = DIRECTION('',(1.,0.,0.)); +#42838 = DIRECTION('',(-0.,1.,0.)); +#42839 = ADVANCED_FACE('',(#42840),#42851,.F.); +#42840 = FACE_BOUND('',#42841,.T.); +#42841 = EDGE_LOOP('',(#42842,#42843,#42844,#42850)); +#42842 = ORIENTED_EDGE('',*,*,#42734,.T.); +#42843 = ORIENTED_EDGE('',*,*,#42819,.T.); +#42844 = ORIENTED_EDGE('',*,*,#42845,.F.); +#42845 = EDGE_CURVE('',#42765,#42820,#42846,.T.); +#42846 = LINE('',#42847,#42848); +#42847 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#42848 = VECTOR('',#42849,1.); +#42849 = DIRECTION('',(-1.,-0.,-0.)); +#42850 = ORIENTED_EDGE('',*,*,#42781,.F.); +#42851 = PLANE('',#42852); +#42852 = AXIS2_PLACEMENT_3D('',#42853,#42854,#42855); +#42853 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#42854 = DIRECTION('',(-0.,-0.,-1.)); +#42855 = DIRECTION('',(0.,1.,-0.)); +#42856 = ADVANCED_FACE('',(#42857),#42863,.F.); +#42857 = FACE_BOUND('',#42858,.T.); +#42858 = EDGE_LOOP('',(#42859,#42860,#42861,#42862)); +#42859 = ORIENTED_EDGE('',*,*,#42764,.F.); +#42860 = ORIENTED_EDGE('',*,*,#42845,.T.); +#42861 = ORIENTED_EDGE('',*,*,#42829,.T.); +#42862 = ORIENTED_EDGE('',*,*,#42796,.F.); +#42863 = PLANE('',#42864); +#42864 = AXIS2_PLACEMENT_3D('',#42865,#42866,#42867); +#42865 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#42866 = DIRECTION('',(0.,1.,0.)); +#42867 = DIRECTION('',(0.,-0.,1.)); +#42868 = ORIENTED_CLOSED_SHELL('',*,#42869,.F.); +#42869 = CLOSED_SHELL('',(#42870,#42910,#42941,#42965,#42989,#43006)); +#42870 = ADVANCED_FACE('',(#42871),#42905,.T.); +#42871 = FACE_BOUND('',#42872,.F.); +#42872 = EDGE_LOOP('',(#42873,#42883,#42891,#42899)); +#42873 = ORIENTED_EDGE('',*,*,#42874,.F.); +#42874 = EDGE_CURVE('',#42875,#42877,#42879,.T.); +#42875 = VERTEX_POINT('',#42876); +#42876 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#42877 = VERTEX_POINT('',#42878); +#42878 = CARTESIAN_POINT('',(8.550000119209,0.63,0.399997961521)); +#42879 = LINE('',#42880,#42881); +#42880 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#42881 = VECTOR('',#42882,1.); +#42882 = DIRECTION('',(0.,0.,-1.)); +#42883 = ORIENTED_EDGE('',*,*,#42884,.T.); +#42884 = EDGE_CURVE('',#42875,#42885,#42887,.T.); +#42885 = VERTEX_POINT('',#42886); +#42886 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#42887 = LINE('',#42888,#42889); +#42888 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#42889 = VECTOR('',#42890,1.); +#42890 = DIRECTION('',(-1.,-0.,-0.)); +#42891 = ORIENTED_EDGE('',*,*,#42892,.T.); +#42892 = EDGE_CURVE('',#42885,#42893,#42895,.T.); +#42893 = VERTEX_POINT('',#42894); +#42894 = CARTESIAN_POINT('',(8.150000119209,0.63,0.399998056888)); +#42895 = LINE('',#42896,#42897); +#42896 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#42897 = VECTOR('',#42898,1.); +#42898 = DIRECTION('',(0.,0.,-1.)); +#42899 = ORIENTED_EDGE('',*,*,#42900,.T.); +#42900 = EDGE_CURVE('',#42893,#42877,#42901,.T.); +#42901 = LINE('',#42902,#42903); +#42902 = CARTESIAN_POINT('',(8.150000119209,0.63,0.399998056888)); +#42903 = VECTOR('',#42904,1.); +#42904 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42905 = PLANE('',#42906); +#42906 = AXIS2_PLACEMENT_3D('',#42907,#42908,#42909); +#42907 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#42908 = DIRECTION('',(0.,1.,0.)); +#42909 = DIRECTION('',(0.,-0.,1.)); +#42910 = ADVANCED_FACE('',(#42911),#42936,.T.); +#42911 = FACE_BOUND('',#42912,.T.); +#42912 = EDGE_LOOP('',(#42913,#42923,#42929,#42930)); +#42913 = ORIENTED_EDGE('',*,*,#42914,.T.); +#42914 = EDGE_CURVE('',#42915,#42917,#42919,.T.); +#42915 = VERTEX_POINT('',#42916); +#42916 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#42917 = VERTEX_POINT('',#42918); +#42918 = CARTESIAN_POINT('',(8.550000119209,-0.27,0.399997961521)); +#42919 = LINE('',#42920,#42921); +#42920 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#42921 = VECTOR('',#42922,1.); +#42922 = DIRECTION('',(0.,0.,-1.)); +#42923 = ORIENTED_EDGE('',*,*,#42924,.F.); +#42924 = EDGE_CURVE('',#42877,#42917,#42925,.T.); +#42925 = LINE('',#42926,#42927); +#42926 = CARTESIAN_POINT('',(8.550000119209,0.63,0.399997961521)); +#42927 = VECTOR('',#42928,1.); +#42928 = DIRECTION('',(0.,-1.,0.)); +#42929 = ORIENTED_EDGE('',*,*,#42874,.F.); +#42930 = ORIENTED_EDGE('',*,*,#42931,.T.); +#42931 = EDGE_CURVE('',#42875,#42915,#42932,.T.); +#42932 = LINE('',#42933,#42934); +#42933 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#42934 = VECTOR('',#42935,1.); +#42935 = DIRECTION('',(-0.,-1.,-0.)); +#42936 = PLANE('',#42937); +#42937 = AXIS2_PLACEMENT_3D('',#42938,#42939,#42940); +#42938 = CARTESIAN_POINT('',(8.550000214576,0.63,0.799997961521)); +#42939 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42940 = DIRECTION('',(0.,1.,0.)); +#42941 = ADVANCED_FACE('',(#42942),#42960,.F.); +#42942 = FACE_BOUND('',#42943,.T.); +#42943 = EDGE_LOOP('',(#42944,#42945,#42953,#42959)); +#42944 = ORIENTED_EDGE('',*,*,#42924,.T.); +#42945 = ORIENTED_EDGE('',*,*,#42946,.T.); +#42946 = EDGE_CURVE('',#42917,#42947,#42949,.T.); +#42947 = VERTEX_POINT('',#42948); +#42948 = CARTESIAN_POINT('',(8.150000119209,-0.27,0.399998056888)); +#42949 = LINE('',#42950,#42951); +#42950 = CARTESIAN_POINT('',(8.550000119209,-0.27,0.399997961521)); +#42951 = VECTOR('',#42952,1.); +#42952 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42953 = ORIENTED_EDGE('',*,*,#42954,.T.); +#42954 = EDGE_CURVE('',#42947,#42893,#42955,.T.); +#42955 = LINE('',#42956,#42957); +#42956 = CARTESIAN_POINT('',(8.150000119209,-0.27,0.399998056888)); +#42957 = VECTOR('',#42958,1.); +#42958 = DIRECTION('',(0.,1.,0.)); +#42959 = ORIENTED_EDGE('',*,*,#42900,.T.); +#42960 = PLANE('',#42961); +#42961 = AXIS2_PLACEMENT_3D('',#42962,#42963,#42964); +#42962 = CARTESIAN_POINT('',(8.350000119209,0.18,0.399998009205)); +#42963 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42964 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42965 = ADVANCED_FACE('',(#42966),#42984,.F.); +#42966 = FACE_BOUND('',#42967,.T.); +#42967 = EDGE_LOOP('',(#42968,#42976,#42977,#42978)); +#42968 = ORIENTED_EDGE('',*,*,#42969,.F.); +#42969 = EDGE_CURVE('',#42885,#42970,#42972,.T.); +#42970 = VERTEX_POINT('',#42971); +#42971 = CARTESIAN_POINT('',(8.15,-0.27,0.4)); +#42972 = LINE('',#42973,#42974); +#42973 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#42974 = VECTOR('',#42975,1.); +#42975 = DIRECTION('',(-0.,-1.,-0.)); +#42976 = ORIENTED_EDGE('',*,*,#42892,.T.); +#42977 = ORIENTED_EDGE('',*,*,#42954,.F.); +#42978 = ORIENTED_EDGE('',*,*,#42979,.F.); +#42979 = EDGE_CURVE('',#42970,#42947,#42980,.T.); +#42980 = LINE('',#42981,#42982); +#42981 = CARTESIAN_POINT('',(8.15,-0.27,0.4)); +#42982 = VECTOR('',#42983,1.); +#42983 = DIRECTION('',(0.,0.,-1.)); +#42984 = PLANE('',#42985); +#42985 = AXIS2_PLACEMENT_3D('',#42986,#42987,#42988); +#42986 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#42987 = DIRECTION('',(1.,0.,0.)); +#42988 = DIRECTION('',(-0.,1.,0.)); +#42989 = ADVANCED_FACE('',(#42990),#43001,.F.); +#42990 = FACE_BOUND('',#42991,.T.); +#42991 = EDGE_LOOP('',(#42992,#42993,#42994,#43000)); +#42992 = ORIENTED_EDGE('',*,*,#42884,.T.); +#42993 = ORIENTED_EDGE('',*,*,#42969,.T.); +#42994 = ORIENTED_EDGE('',*,*,#42995,.F.); +#42995 = EDGE_CURVE('',#42915,#42970,#42996,.T.); +#42996 = LINE('',#42997,#42998); +#42997 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#42998 = VECTOR('',#42999,1.); +#42999 = DIRECTION('',(-1.,-0.,-0.)); +#43000 = ORIENTED_EDGE('',*,*,#42931,.F.); +#43001 = PLANE('',#43002); +#43002 = AXIS2_PLACEMENT_3D('',#43003,#43004,#43005); +#43003 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#43004 = DIRECTION('',(-0.,-0.,-1.)); +#43005 = DIRECTION('',(0.,1.,-0.)); +#43006 = ADVANCED_FACE('',(#43007),#43013,.F.); +#43007 = FACE_BOUND('',#43008,.T.); +#43008 = EDGE_LOOP('',(#43009,#43010,#43011,#43012)); +#43009 = ORIENTED_EDGE('',*,*,#42914,.F.); +#43010 = ORIENTED_EDGE('',*,*,#42995,.T.); +#43011 = ORIENTED_EDGE('',*,*,#42979,.T.); +#43012 = ORIENTED_EDGE('',*,*,#42946,.F.); +#43013 = PLANE('',#43014); +#43014 = AXIS2_PLACEMENT_3D('',#43015,#43016,#43017); +#43015 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#43016 = DIRECTION('',(0.,1.,0.)); +#43017 = DIRECTION('',(0.,-0.,1.)); +#43018 = ORIENTED_CLOSED_SHELL('',*,#43019,.F.); +#43019 = CLOSED_SHELL('',(#43020,#43060,#43091,#43115,#43139,#43156)); +#43020 = ADVANCED_FACE('',(#43021),#43055,.T.); +#43021 = FACE_BOUND('',#43022,.F.); +#43022 = EDGE_LOOP('',(#43023,#43033,#43041,#43049)); +#43023 = ORIENTED_EDGE('',*,*,#43024,.F.); +#43024 = EDGE_CURVE('',#43025,#43027,#43029,.T.); +#43025 = VERTEX_POINT('',#43026); +#43026 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#43027 = VERTEX_POINT('',#43028); +#43028 = CARTESIAN_POINT('',(8.550000119209,1.9,0.399997961521)); +#43029 = LINE('',#43030,#43031); +#43030 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#43031 = VECTOR('',#43032,1.); +#43032 = DIRECTION('',(0.,0.,-1.)); +#43033 = ORIENTED_EDGE('',*,*,#43034,.T.); +#43034 = EDGE_CURVE('',#43025,#43035,#43037,.T.); +#43035 = VERTEX_POINT('',#43036); +#43036 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#43037 = LINE('',#43038,#43039); +#43038 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#43039 = VECTOR('',#43040,1.); +#43040 = DIRECTION('',(-1.,-0.,-0.)); +#43041 = ORIENTED_EDGE('',*,*,#43042,.T.); +#43042 = EDGE_CURVE('',#43035,#43043,#43045,.T.); +#43043 = VERTEX_POINT('',#43044); +#43044 = CARTESIAN_POINT('',(8.150000119209,1.9,0.399998056888)); +#43045 = LINE('',#43046,#43047); +#43046 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#43047 = VECTOR('',#43048,1.); +#43048 = DIRECTION('',(0.,0.,-1.)); +#43049 = ORIENTED_EDGE('',*,*,#43050,.T.); +#43050 = EDGE_CURVE('',#43043,#43027,#43051,.T.); +#43051 = LINE('',#43052,#43053); +#43052 = CARTESIAN_POINT('',(8.150000119209,1.9,0.399998056888)); +#43053 = VECTOR('',#43054,1.); +#43054 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43055 = PLANE('',#43056); +#43056 = AXIS2_PLACEMENT_3D('',#43057,#43058,#43059); +#43057 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#43058 = DIRECTION('',(0.,1.,0.)); +#43059 = DIRECTION('',(0.,-0.,1.)); +#43060 = ADVANCED_FACE('',(#43061),#43086,.T.); +#43061 = FACE_BOUND('',#43062,.T.); +#43062 = EDGE_LOOP('',(#43063,#43073,#43079,#43080)); +#43063 = ORIENTED_EDGE('',*,*,#43064,.T.); +#43064 = EDGE_CURVE('',#43065,#43067,#43069,.T.); +#43065 = VERTEX_POINT('',#43066); +#43066 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#43067 = VERTEX_POINT('',#43068); +#43068 = CARTESIAN_POINT('',(8.550000119209,1.,0.399997961521)); +#43069 = LINE('',#43070,#43071); +#43070 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#43071 = VECTOR('',#43072,1.); +#43072 = DIRECTION('',(0.,0.,-1.)); +#43073 = ORIENTED_EDGE('',*,*,#43074,.F.); +#43074 = EDGE_CURVE('',#43027,#43067,#43075,.T.); +#43075 = LINE('',#43076,#43077); +#43076 = CARTESIAN_POINT('',(8.550000119209,1.9,0.399997961521)); +#43077 = VECTOR('',#43078,1.); +#43078 = DIRECTION('',(0.,-1.,0.)); +#43079 = ORIENTED_EDGE('',*,*,#43024,.F.); +#43080 = ORIENTED_EDGE('',*,*,#43081,.T.); +#43081 = EDGE_CURVE('',#43025,#43065,#43082,.T.); +#43082 = LINE('',#43083,#43084); +#43083 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#43084 = VECTOR('',#43085,1.); +#43085 = DIRECTION('',(-0.,-1.,-0.)); +#43086 = PLANE('',#43087); +#43087 = AXIS2_PLACEMENT_3D('',#43088,#43089,#43090); +#43088 = CARTESIAN_POINT('',(8.550000214576,1.9,0.799997961521)); +#43089 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43090 = DIRECTION('',(0.,1.,0.)); +#43091 = ADVANCED_FACE('',(#43092),#43110,.F.); +#43092 = FACE_BOUND('',#43093,.T.); +#43093 = EDGE_LOOP('',(#43094,#43095,#43103,#43109)); +#43094 = ORIENTED_EDGE('',*,*,#43074,.T.); +#43095 = ORIENTED_EDGE('',*,*,#43096,.T.); +#43096 = EDGE_CURVE('',#43067,#43097,#43099,.T.); +#43097 = VERTEX_POINT('',#43098); +#43098 = CARTESIAN_POINT('',(8.150000119209,1.,0.399998056888)); +#43099 = LINE('',#43100,#43101); +#43100 = CARTESIAN_POINT('',(8.550000119209,1.,0.399997961521)); +#43101 = VECTOR('',#43102,1.); +#43102 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43103 = ORIENTED_EDGE('',*,*,#43104,.T.); +#43104 = EDGE_CURVE('',#43097,#43043,#43105,.T.); +#43105 = LINE('',#43106,#43107); +#43106 = CARTESIAN_POINT('',(8.150000119209,1.,0.399998056888)); +#43107 = VECTOR('',#43108,1.); +#43108 = DIRECTION('',(0.,1.,0.)); +#43109 = ORIENTED_EDGE('',*,*,#43050,.T.); +#43110 = PLANE('',#43111); +#43111 = AXIS2_PLACEMENT_3D('',#43112,#43113,#43114); +#43112 = CARTESIAN_POINT('',(8.350000119209,1.45,0.399998009205)); +#43113 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43114 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43115 = ADVANCED_FACE('',(#43116),#43134,.F.); +#43116 = FACE_BOUND('',#43117,.T.); +#43117 = EDGE_LOOP('',(#43118,#43126,#43127,#43128)); +#43118 = ORIENTED_EDGE('',*,*,#43119,.F.); +#43119 = EDGE_CURVE('',#43035,#43120,#43122,.T.); +#43120 = VERTEX_POINT('',#43121); +#43121 = CARTESIAN_POINT('',(8.15,1.,0.4)); +#43122 = LINE('',#43123,#43124); +#43123 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#43124 = VECTOR('',#43125,1.); +#43125 = DIRECTION('',(-0.,-1.,-0.)); +#43126 = ORIENTED_EDGE('',*,*,#43042,.T.); +#43127 = ORIENTED_EDGE('',*,*,#43104,.F.); +#43128 = ORIENTED_EDGE('',*,*,#43129,.F.); +#43129 = EDGE_CURVE('',#43120,#43097,#43130,.T.); +#43130 = LINE('',#43131,#43132); +#43131 = CARTESIAN_POINT('',(8.15,1.,0.4)); +#43132 = VECTOR('',#43133,1.); +#43133 = DIRECTION('',(0.,0.,-1.)); +#43134 = PLANE('',#43135); +#43135 = AXIS2_PLACEMENT_3D('',#43136,#43137,#43138); +#43136 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#43137 = DIRECTION('',(1.,0.,0.)); +#43138 = DIRECTION('',(-0.,1.,0.)); +#43139 = ADVANCED_FACE('',(#43140),#43151,.F.); +#43140 = FACE_BOUND('',#43141,.T.); +#43141 = EDGE_LOOP('',(#43142,#43143,#43144,#43150)); +#43142 = ORIENTED_EDGE('',*,*,#43034,.T.); +#43143 = ORIENTED_EDGE('',*,*,#43119,.T.); +#43144 = ORIENTED_EDGE('',*,*,#43145,.F.); +#43145 = EDGE_CURVE('',#43065,#43120,#43146,.T.); +#43146 = LINE('',#43147,#43148); +#43147 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#43148 = VECTOR('',#43149,1.); +#43149 = DIRECTION('',(-1.,-0.,-0.)); +#43150 = ORIENTED_EDGE('',*,*,#43081,.F.); +#43151 = PLANE('',#43152); +#43152 = AXIS2_PLACEMENT_3D('',#43153,#43154,#43155); +#43153 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#43154 = DIRECTION('',(-0.,-0.,-1.)); +#43155 = DIRECTION('',(0.,1.,-0.)); +#43156 = ADVANCED_FACE('',(#43157),#43163,.F.); +#43157 = FACE_BOUND('',#43158,.T.); +#43158 = EDGE_LOOP('',(#43159,#43160,#43161,#43162)); +#43159 = ORIENTED_EDGE('',*,*,#43064,.F.); +#43160 = ORIENTED_EDGE('',*,*,#43145,.T.); +#43161 = ORIENTED_EDGE('',*,*,#43129,.T.); +#43162 = ORIENTED_EDGE('',*,*,#43096,.F.); +#43163 = PLANE('',#43164); +#43164 = AXIS2_PLACEMENT_3D('',#43165,#43166,#43167); +#43165 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#43166 = DIRECTION('',(0.,1.,0.)); +#43167 = DIRECTION('',(0.,-0.,1.)); +#43168 = ORIENTED_CLOSED_SHELL('',*,#43169,.F.); +#43169 = CLOSED_SHELL('',(#43170,#43210,#43241,#43265,#43289,#43306)); +#43170 = ADVANCED_FACE('',(#43171),#43205,.T.); +#43171 = FACE_BOUND('',#43172,.F.); +#43172 = EDGE_LOOP('',(#43173,#43183,#43191,#43199)); +#43173 = ORIENTED_EDGE('',*,*,#43174,.F.); +#43174 = EDGE_CURVE('',#43175,#43177,#43179,.T.); +#43175 = VERTEX_POINT('',#43176); +#43176 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#43177 = VERTEX_POINT('',#43178); +#43178 = CARTESIAN_POINT('',(8.550000119209,3.17,0.399997961521)); +#43179 = LINE('',#43180,#43181); +#43180 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#43181 = VECTOR('',#43182,1.); +#43182 = DIRECTION('',(0.,0.,-1.)); +#43183 = ORIENTED_EDGE('',*,*,#43184,.T.); +#43184 = EDGE_CURVE('',#43175,#43185,#43187,.T.); +#43185 = VERTEX_POINT('',#43186); +#43186 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#43187 = LINE('',#43188,#43189); +#43188 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#43189 = VECTOR('',#43190,1.); +#43190 = DIRECTION('',(-1.,-0.,-0.)); +#43191 = ORIENTED_EDGE('',*,*,#43192,.T.); +#43192 = EDGE_CURVE('',#43185,#43193,#43195,.T.); +#43193 = VERTEX_POINT('',#43194); +#43194 = CARTESIAN_POINT('',(8.150000119209,3.17,0.399998056888)); +#43195 = LINE('',#43196,#43197); +#43196 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#43197 = VECTOR('',#43198,1.); +#43198 = DIRECTION('',(0.,0.,-1.)); +#43199 = ORIENTED_EDGE('',*,*,#43200,.T.); +#43200 = EDGE_CURVE('',#43193,#43177,#43201,.T.); +#43201 = LINE('',#43202,#43203); +#43202 = CARTESIAN_POINT('',(8.150000119209,3.17,0.399998056888)); +#43203 = VECTOR('',#43204,1.); +#43204 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43205 = PLANE('',#43206); +#43206 = AXIS2_PLACEMENT_3D('',#43207,#43208,#43209); +#43207 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#43208 = DIRECTION('',(0.,1.,0.)); +#43209 = DIRECTION('',(0.,-0.,1.)); +#43210 = ADVANCED_FACE('',(#43211),#43236,.T.); +#43211 = FACE_BOUND('',#43212,.T.); +#43212 = EDGE_LOOP('',(#43213,#43223,#43229,#43230)); +#43213 = ORIENTED_EDGE('',*,*,#43214,.T.); +#43214 = EDGE_CURVE('',#43215,#43217,#43219,.T.); +#43215 = VERTEX_POINT('',#43216); +#43216 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#43217 = VERTEX_POINT('',#43218); +#43218 = CARTESIAN_POINT('',(8.550000119209,2.27,0.399997961521)); +#43219 = LINE('',#43220,#43221); +#43220 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#43221 = VECTOR('',#43222,1.); +#43222 = DIRECTION('',(0.,0.,-1.)); +#43223 = ORIENTED_EDGE('',*,*,#43224,.F.); +#43224 = EDGE_CURVE('',#43177,#43217,#43225,.T.); +#43225 = LINE('',#43226,#43227); +#43226 = CARTESIAN_POINT('',(8.550000119209,3.17,0.399997961521)); +#43227 = VECTOR('',#43228,1.); +#43228 = DIRECTION('',(0.,-1.,0.)); +#43229 = ORIENTED_EDGE('',*,*,#43174,.F.); +#43230 = ORIENTED_EDGE('',*,*,#43231,.T.); +#43231 = EDGE_CURVE('',#43175,#43215,#43232,.T.); +#43232 = LINE('',#43233,#43234); +#43233 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#43234 = VECTOR('',#43235,1.); +#43235 = DIRECTION('',(-0.,-1.,-0.)); +#43236 = PLANE('',#43237); +#43237 = AXIS2_PLACEMENT_3D('',#43238,#43239,#43240); +#43238 = CARTESIAN_POINT('',(8.550000214576,3.17,0.799997961521)); +#43239 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43240 = DIRECTION('',(0.,1.,0.)); +#43241 = ADVANCED_FACE('',(#43242),#43260,.F.); +#43242 = FACE_BOUND('',#43243,.T.); +#43243 = EDGE_LOOP('',(#43244,#43245,#43253,#43259)); +#43244 = ORIENTED_EDGE('',*,*,#43224,.T.); +#43245 = ORIENTED_EDGE('',*,*,#43246,.T.); +#43246 = EDGE_CURVE('',#43217,#43247,#43249,.T.); +#43247 = VERTEX_POINT('',#43248); +#43248 = CARTESIAN_POINT('',(8.150000119209,2.27,0.399998056888)); +#43249 = LINE('',#43250,#43251); +#43250 = CARTESIAN_POINT('',(8.550000119209,2.27,0.399997961521)); +#43251 = VECTOR('',#43252,1.); +#43252 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43253 = ORIENTED_EDGE('',*,*,#43254,.T.); +#43254 = EDGE_CURVE('',#43247,#43193,#43255,.T.); +#43255 = LINE('',#43256,#43257); +#43256 = CARTESIAN_POINT('',(8.150000119209,2.27,0.399998056888)); +#43257 = VECTOR('',#43258,1.); +#43258 = DIRECTION('',(0.,1.,0.)); +#43259 = ORIENTED_EDGE('',*,*,#43200,.T.); +#43260 = PLANE('',#43261); +#43261 = AXIS2_PLACEMENT_3D('',#43262,#43263,#43264); +#43262 = CARTESIAN_POINT('',(8.350000119209,2.72,0.399998009205)); +#43263 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43264 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43265 = ADVANCED_FACE('',(#43266),#43284,.F.); +#43266 = FACE_BOUND('',#43267,.T.); +#43267 = EDGE_LOOP('',(#43268,#43276,#43277,#43278)); +#43268 = ORIENTED_EDGE('',*,*,#43269,.F.); +#43269 = EDGE_CURVE('',#43185,#43270,#43272,.T.); +#43270 = VERTEX_POINT('',#43271); +#43271 = CARTESIAN_POINT('',(8.15,2.27,0.4)); +#43272 = LINE('',#43273,#43274); +#43273 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#43274 = VECTOR('',#43275,1.); +#43275 = DIRECTION('',(-0.,-1.,-0.)); +#43276 = ORIENTED_EDGE('',*,*,#43192,.T.); +#43277 = ORIENTED_EDGE('',*,*,#43254,.F.); +#43278 = ORIENTED_EDGE('',*,*,#43279,.F.); +#43279 = EDGE_CURVE('',#43270,#43247,#43280,.T.); +#43280 = LINE('',#43281,#43282); +#43281 = CARTESIAN_POINT('',(8.15,2.27,0.4)); +#43282 = VECTOR('',#43283,1.); +#43283 = DIRECTION('',(0.,0.,-1.)); +#43284 = PLANE('',#43285); +#43285 = AXIS2_PLACEMENT_3D('',#43286,#43287,#43288); +#43286 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#43287 = DIRECTION('',(1.,0.,0.)); +#43288 = DIRECTION('',(-0.,1.,0.)); +#43289 = ADVANCED_FACE('',(#43290),#43301,.F.); +#43290 = FACE_BOUND('',#43291,.T.); +#43291 = EDGE_LOOP('',(#43292,#43293,#43294,#43300)); +#43292 = ORIENTED_EDGE('',*,*,#43184,.T.); +#43293 = ORIENTED_EDGE('',*,*,#43269,.T.); +#43294 = ORIENTED_EDGE('',*,*,#43295,.F.); +#43295 = EDGE_CURVE('',#43215,#43270,#43296,.T.); +#43296 = LINE('',#43297,#43298); +#43297 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#43298 = VECTOR('',#43299,1.); +#43299 = DIRECTION('',(-1.,-0.,-0.)); +#43300 = ORIENTED_EDGE('',*,*,#43231,.F.); +#43301 = PLANE('',#43302); +#43302 = AXIS2_PLACEMENT_3D('',#43303,#43304,#43305); +#43303 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#43304 = DIRECTION('',(-0.,-0.,-1.)); +#43305 = DIRECTION('',(0.,1.,-0.)); +#43306 = ADVANCED_FACE('',(#43307),#43313,.F.); +#43307 = FACE_BOUND('',#43308,.T.); +#43308 = EDGE_LOOP('',(#43309,#43310,#43311,#43312)); +#43309 = ORIENTED_EDGE('',*,*,#43214,.F.); +#43310 = ORIENTED_EDGE('',*,*,#43295,.T.); +#43311 = ORIENTED_EDGE('',*,*,#43279,.T.); +#43312 = ORIENTED_EDGE('',*,*,#43246,.F.); +#43313 = PLANE('',#43314); +#43314 = AXIS2_PLACEMENT_3D('',#43315,#43316,#43317); +#43315 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#43316 = DIRECTION('',(0.,1.,0.)); +#43317 = DIRECTION('',(0.,-0.,1.)); +#43318 = ORIENTED_CLOSED_SHELL('',*,#43319,.F.); +#43319 = CLOSED_SHELL('',(#43320,#43360,#43391,#43415,#43439,#43456)); +#43320 = ADVANCED_FACE('',(#43321),#43355,.T.); +#43321 = FACE_BOUND('',#43322,.F.); +#43322 = EDGE_LOOP('',(#43323,#43333,#43341,#43349)); +#43323 = ORIENTED_EDGE('',*,*,#43324,.F.); +#43324 = EDGE_CURVE('',#43325,#43327,#43329,.T.); +#43325 = VERTEX_POINT('',#43326); +#43326 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#43327 = VERTEX_POINT('',#43328); +#43328 = CARTESIAN_POINT('',(8.550000119209,4.44,0.399997961521)); +#43329 = LINE('',#43330,#43331); +#43330 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#43331 = VECTOR('',#43332,1.); +#43332 = DIRECTION('',(0.,0.,-1.)); +#43333 = ORIENTED_EDGE('',*,*,#43334,.T.); +#43334 = EDGE_CURVE('',#43325,#43335,#43337,.T.); +#43335 = VERTEX_POINT('',#43336); +#43336 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#43337 = LINE('',#43338,#43339); +#43338 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#43339 = VECTOR('',#43340,1.); +#43340 = DIRECTION('',(-1.,-0.,-0.)); +#43341 = ORIENTED_EDGE('',*,*,#43342,.T.); +#43342 = EDGE_CURVE('',#43335,#43343,#43345,.T.); +#43343 = VERTEX_POINT('',#43344); +#43344 = CARTESIAN_POINT('',(8.150000119209,4.44,0.399998056888)); +#43345 = LINE('',#43346,#43347); +#43346 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#43347 = VECTOR('',#43348,1.); +#43348 = DIRECTION('',(0.,0.,-1.)); +#43349 = ORIENTED_EDGE('',*,*,#43350,.T.); +#43350 = EDGE_CURVE('',#43343,#43327,#43351,.T.); +#43351 = LINE('',#43352,#43353); +#43352 = CARTESIAN_POINT('',(8.150000119209,4.44,0.399998056888)); +#43353 = VECTOR('',#43354,1.); +#43354 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43355 = PLANE('',#43356); +#43356 = AXIS2_PLACEMENT_3D('',#43357,#43358,#43359); +#43357 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#43358 = DIRECTION('',(0.,1.,0.)); +#43359 = DIRECTION('',(0.,-0.,1.)); +#43360 = ADVANCED_FACE('',(#43361),#43386,.T.); +#43361 = FACE_BOUND('',#43362,.T.); +#43362 = EDGE_LOOP('',(#43363,#43373,#43379,#43380)); +#43363 = ORIENTED_EDGE('',*,*,#43364,.T.); +#43364 = EDGE_CURVE('',#43365,#43367,#43369,.T.); +#43365 = VERTEX_POINT('',#43366); +#43366 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#43367 = VERTEX_POINT('',#43368); +#43368 = CARTESIAN_POINT('',(8.550000119209,3.54,0.399997961521)); +#43369 = LINE('',#43370,#43371); +#43370 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#43371 = VECTOR('',#43372,1.); +#43372 = DIRECTION('',(0.,0.,-1.)); +#43373 = ORIENTED_EDGE('',*,*,#43374,.F.); +#43374 = EDGE_CURVE('',#43327,#43367,#43375,.T.); +#43375 = LINE('',#43376,#43377); +#43376 = CARTESIAN_POINT('',(8.550000119209,4.44,0.399997961521)); +#43377 = VECTOR('',#43378,1.); +#43378 = DIRECTION('',(0.,-1.,0.)); +#43379 = ORIENTED_EDGE('',*,*,#43324,.F.); +#43380 = ORIENTED_EDGE('',*,*,#43381,.T.); +#43381 = EDGE_CURVE('',#43325,#43365,#43382,.T.); +#43382 = LINE('',#43383,#43384); +#43383 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#43384 = VECTOR('',#43385,1.); +#43385 = DIRECTION('',(-0.,-1.,-0.)); +#43386 = PLANE('',#43387); +#43387 = AXIS2_PLACEMENT_3D('',#43388,#43389,#43390); +#43388 = CARTESIAN_POINT('',(8.550000214576,4.44,0.799997961521)); +#43389 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43390 = DIRECTION('',(0.,1.,0.)); +#43391 = ADVANCED_FACE('',(#43392),#43410,.F.); +#43392 = FACE_BOUND('',#43393,.T.); +#43393 = EDGE_LOOP('',(#43394,#43395,#43403,#43409)); +#43394 = ORIENTED_EDGE('',*,*,#43374,.T.); +#43395 = ORIENTED_EDGE('',*,*,#43396,.T.); +#43396 = EDGE_CURVE('',#43367,#43397,#43399,.T.); +#43397 = VERTEX_POINT('',#43398); +#43398 = CARTESIAN_POINT('',(8.150000119209,3.54,0.399998056888)); +#43399 = LINE('',#43400,#43401); +#43400 = CARTESIAN_POINT('',(8.550000119209,3.54,0.399997961521)); +#43401 = VECTOR('',#43402,1.); +#43402 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43403 = ORIENTED_EDGE('',*,*,#43404,.T.); +#43404 = EDGE_CURVE('',#43397,#43343,#43405,.T.); +#43405 = LINE('',#43406,#43407); +#43406 = CARTESIAN_POINT('',(8.150000119209,3.54,0.399998056888)); +#43407 = VECTOR('',#43408,1.); +#43408 = DIRECTION('',(0.,1.,0.)); +#43409 = ORIENTED_EDGE('',*,*,#43350,.T.); +#43410 = PLANE('',#43411); +#43411 = AXIS2_PLACEMENT_3D('',#43412,#43413,#43414); +#43412 = CARTESIAN_POINT('',(8.350000119209,3.99,0.399998009205)); +#43413 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43414 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43415 = ADVANCED_FACE('',(#43416),#43434,.F.); +#43416 = FACE_BOUND('',#43417,.T.); +#43417 = EDGE_LOOP('',(#43418,#43426,#43427,#43428)); +#43418 = ORIENTED_EDGE('',*,*,#43419,.F.); +#43419 = EDGE_CURVE('',#43335,#43420,#43422,.T.); +#43420 = VERTEX_POINT('',#43421); +#43421 = CARTESIAN_POINT('',(8.15,3.54,0.4)); +#43422 = LINE('',#43423,#43424); +#43423 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#43424 = VECTOR('',#43425,1.); +#43425 = DIRECTION('',(-0.,-1.,-0.)); +#43426 = ORIENTED_EDGE('',*,*,#43342,.T.); +#43427 = ORIENTED_EDGE('',*,*,#43404,.F.); +#43428 = ORIENTED_EDGE('',*,*,#43429,.F.); +#43429 = EDGE_CURVE('',#43420,#43397,#43430,.T.); +#43430 = LINE('',#43431,#43432); +#43431 = CARTESIAN_POINT('',(8.15,3.54,0.4)); +#43432 = VECTOR('',#43433,1.); +#43433 = DIRECTION('',(0.,0.,-1.)); +#43434 = PLANE('',#43435); +#43435 = AXIS2_PLACEMENT_3D('',#43436,#43437,#43438); +#43436 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#43437 = DIRECTION('',(1.,0.,0.)); +#43438 = DIRECTION('',(-0.,1.,0.)); +#43439 = ADVANCED_FACE('',(#43440),#43451,.F.); +#43440 = FACE_BOUND('',#43441,.T.); +#43441 = EDGE_LOOP('',(#43442,#43443,#43444,#43450)); +#43442 = ORIENTED_EDGE('',*,*,#43334,.T.); +#43443 = ORIENTED_EDGE('',*,*,#43419,.T.); +#43444 = ORIENTED_EDGE('',*,*,#43445,.F.); +#43445 = EDGE_CURVE('',#43365,#43420,#43446,.T.); +#43446 = LINE('',#43447,#43448); +#43447 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#43448 = VECTOR('',#43449,1.); +#43449 = DIRECTION('',(-1.,-0.,-0.)); +#43450 = ORIENTED_EDGE('',*,*,#43381,.F.); +#43451 = PLANE('',#43452); +#43452 = AXIS2_PLACEMENT_3D('',#43453,#43454,#43455); +#43453 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#43454 = DIRECTION('',(-0.,-0.,-1.)); +#43455 = DIRECTION('',(0.,1.,-0.)); +#43456 = ADVANCED_FACE('',(#43457),#43463,.F.); +#43457 = FACE_BOUND('',#43458,.T.); +#43458 = EDGE_LOOP('',(#43459,#43460,#43461,#43462)); +#43459 = ORIENTED_EDGE('',*,*,#43364,.F.); +#43460 = ORIENTED_EDGE('',*,*,#43445,.T.); +#43461 = ORIENTED_EDGE('',*,*,#43429,.T.); +#43462 = ORIENTED_EDGE('',*,*,#43396,.F.); +#43463 = PLANE('',#43464); +#43464 = AXIS2_PLACEMENT_3D('',#43465,#43466,#43467); +#43465 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#43466 = DIRECTION('',(0.,1.,0.)); +#43467 = DIRECTION('',(0.,-0.,1.)); +#43468 = ORIENTED_CLOSED_SHELL('',*,#43469,.F.); +#43469 = CLOSED_SHELL('',(#43470,#43510,#43541,#43565,#43589,#43606)); +#43470 = ADVANCED_FACE('',(#43471),#43505,.T.); +#43471 = FACE_BOUND('',#43472,.F.); +#43472 = EDGE_LOOP('',(#43473,#43483,#43491,#43499)); +#43473 = ORIENTED_EDGE('',*,*,#43474,.F.); +#43474 = EDGE_CURVE('',#43475,#43477,#43479,.T.); +#43475 = VERTEX_POINT('',#43476); +#43476 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#43477 = VERTEX_POINT('',#43478); +#43478 = CARTESIAN_POINT('',(8.550000119209,5.71,0.399997961521)); +#43479 = LINE('',#43480,#43481); +#43480 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#43481 = VECTOR('',#43482,1.); +#43482 = DIRECTION('',(0.,0.,-1.)); +#43483 = ORIENTED_EDGE('',*,*,#43484,.T.); +#43484 = EDGE_CURVE('',#43475,#43485,#43487,.T.); +#43485 = VERTEX_POINT('',#43486); +#43486 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#43487 = LINE('',#43488,#43489); +#43488 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#43489 = VECTOR('',#43490,1.); +#43490 = DIRECTION('',(-1.,-0.,-0.)); +#43491 = ORIENTED_EDGE('',*,*,#43492,.T.); +#43492 = EDGE_CURVE('',#43485,#43493,#43495,.T.); +#43493 = VERTEX_POINT('',#43494); +#43494 = CARTESIAN_POINT('',(8.150000119209,5.71,0.399998056888)); +#43495 = LINE('',#43496,#43497); +#43496 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#43497 = VECTOR('',#43498,1.); +#43498 = DIRECTION('',(0.,0.,-1.)); +#43499 = ORIENTED_EDGE('',*,*,#43500,.T.); +#43500 = EDGE_CURVE('',#43493,#43477,#43501,.T.); +#43501 = LINE('',#43502,#43503); +#43502 = CARTESIAN_POINT('',(8.150000119209,5.71,0.399998056888)); +#43503 = VECTOR('',#43504,1.); +#43504 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43505 = PLANE('',#43506); +#43506 = AXIS2_PLACEMENT_3D('',#43507,#43508,#43509); +#43507 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#43508 = DIRECTION('',(0.,1.,0.)); +#43509 = DIRECTION('',(0.,-0.,1.)); +#43510 = ADVANCED_FACE('',(#43511),#43536,.T.); +#43511 = FACE_BOUND('',#43512,.T.); +#43512 = EDGE_LOOP('',(#43513,#43523,#43529,#43530)); +#43513 = ORIENTED_EDGE('',*,*,#43514,.T.); +#43514 = EDGE_CURVE('',#43515,#43517,#43519,.T.); +#43515 = VERTEX_POINT('',#43516); +#43516 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#43517 = VERTEX_POINT('',#43518); +#43518 = CARTESIAN_POINT('',(8.550000119209,4.81,0.399997961521)); +#43519 = LINE('',#43520,#43521); +#43520 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#43521 = VECTOR('',#43522,1.); +#43522 = DIRECTION('',(0.,0.,-1.)); +#43523 = ORIENTED_EDGE('',*,*,#43524,.F.); +#43524 = EDGE_CURVE('',#43477,#43517,#43525,.T.); +#43525 = LINE('',#43526,#43527); +#43526 = CARTESIAN_POINT('',(8.550000119209,5.71,0.399997961521)); +#43527 = VECTOR('',#43528,1.); +#43528 = DIRECTION('',(0.,-1.,0.)); +#43529 = ORIENTED_EDGE('',*,*,#43474,.F.); +#43530 = ORIENTED_EDGE('',*,*,#43531,.T.); +#43531 = EDGE_CURVE('',#43475,#43515,#43532,.T.); +#43532 = LINE('',#43533,#43534); +#43533 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#43534 = VECTOR('',#43535,1.); +#43535 = DIRECTION('',(-0.,-1.,-0.)); +#43536 = PLANE('',#43537); +#43537 = AXIS2_PLACEMENT_3D('',#43538,#43539,#43540); +#43538 = CARTESIAN_POINT('',(8.550000214576,5.71,0.799997961521)); +#43539 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43540 = DIRECTION('',(0.,1.,0.)); +#43541 = ADVANCED_FACE('',(#43542),#43560,.F.); +#43542 = FACE_BOUND('',#43543,.T.); +#43543 = EDGE_LOOP('',(#43544,#43545,#43553,#43559)); +#43544 = ORIENTED_EDGE('',*,*,#43524,.T.); +#43545 = ORIENTED_EDGE('',*,*,#43546,.T.); +#43546 = EDGE_CURVE('',#43517,#43547,#43549,.T.); +#43547 = VERTEX_POINT('',#43548); +#43548 = CARTESIAN_POINT('',(8.150000119209,4.81,0.399998056888)); +#43549 = LINE('',#43550,#43551); +#43550 = CARTESIAN_POINT('',(8.550000119209,4.81,0.399997961521)); +#43551 = VECTOR('',#43552,1.); +#43552 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43553 = ORIENTED_EDGE('',*,*,#43554,.T.); +#43554 = EDGE_CURVE('',#43547,#43493,#43555,.T.); +#43555 = LINE('',#43556,#43557); +#43556 = CARTESIAN_POINT('',(8.150000119209,4.81,0.399998056888)); +#43557 = VECTOR('',#43558,1.); +#43558 = DIRECTION('',(0.,1.,0.)); +#43559 = ORIENTED_EDGE('',*,*,#43500,.T.); +#43560 = PLANE('',#43561); +#43561 = AXIS2_PLACEMENT_3D('',#43562,#43563,#43564); +#43562 = CARTESIAN_POINT('',(8.350000119209,5.26,0.399998009205)); +#43563 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43564 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43565 = ADVANCED_FACE('',(#43566),#43584,.F.); +#43566 = FACE_BOUND('',#43567,.T.); +#43567 = EDGE_LOOP('',(#43568,#43576,#43577,#43578)); +#43568 = ORIENTED_EDGE('',*,*,#43569,.F.); +#43569 = EDGE_CURVE('',#43485,#43570,#43572,.T.); +#43570 = VERTEX_POINT('',#43571); +#43571 = CARTESIAN_POINT('',(8.15,4.81,0.4)); +#43572 = LINE('',#43573,#43574); +#43573 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#43574 = VECTOR('',#43575,1.); +#43575 = DIRECTION('',(-0.,-1.,-0.)); +#43576 = ORIENTED_EDGE('',*,*,#43492,.T.); +#43577 = ORIENTED_EDGE('',*,*,#43554,.F.); +#43578 = ORIENTED_EDGE('',*,*,#43579,.F.); +#43579 = EDGE_CURVE('',#43570,#43547,#43580,.T.); +#43580 = LINE('',#43581,#43582); +#43581 = CARTESIAN_POINT('',(8.15,4.81,0.4)); +#43582 = VECTOR('',#43583,1.); +#43583 = DIRECTION('',(0.,0.,-1.)); +#43584 = PLANE('',#43585); +#43585 = AXIS2_PLACEMENT_3D('',#43586,#43587,#43588); +#43586 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#43587 = DIRECTION('',(1.,0.,0.)); +#43588 = DIRECTION('',(-0.,1.,0.)); +#43589 = ADVANCED_FACE('',(#43590),#43601,.F.); +#43590 = FACE_BOUND('',#43591,.T.); +#43591 = EDGE_LOOP('',(#43592,#43593,#43594,#43600)); +#43592 = ORIENTED_EDGE('',*,*,#43484,.T.); +#43593 = ORIENTED_EDGE('',*,*,#43569,.T.); +#43594 = ORIENTED_EDGE('',*,*,#43595,.F.); +#43595 = EDGE_CURVE('',#43515,#43570,#43596,.T.); +#43596 = LINE('',#43597,#43598); +#43597 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#43598 = VECTOR('',#43599,1.); +#43599 = DIRECTION('',(-1.,-0.,-0.)); +#43600 = ORIENTED_EDGE('',*,*,#43531,.F.); +#43601 = PLANE('',#43602); +#43602 = AXIS2_PLACEMENT_3D('',#43603,#43604,#43605); +#43603 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#43604 = DIRECTION('',(-0.,-0.,-1.)); +#43605 = DIRECTION('',(0.,1.,-0.)); +#43606 = ADVANCED_FACE('',(#43607),#43613,.F.); +#43607 = FACE_BOUND('',#43608,.T.); +#43608 = EDGE_LOOP('',(#43609,#43610,#43611,#43612)); +#43609 = ORIENTED_EDGE('',*,*,#43514,.F.); +#43610 = ORIENTED_EDGE('',*,*,#43595,.T.); +#43611 = ORIENTED_EDGE('',*,*,#43579,.T.); +#43612 = ORIENTED_EDGE('',*,*,#43546,.F.); +#43613 = PLANE('',#43614); +#43614 = AXIS2_PLACEMENT_3D('',#43615,#43616,#43617); +#43615 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#43616 = DIRECTION('',(0.,1.,0.)); +#43617 = DIRECTION('',(0.,-0.,1.)); +#43618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#43622)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#43619,#43620,#43621)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#43619 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#43620 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#43621 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#43622 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#43619, + 'distance_accuracy_value','confusion accuracy'); +#43623 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#43624,#43626); +#43624 = ( REPRESENTATION_RELATIONSHIP('','',#28292,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#43625) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#43625 = ITEM_DEFINED_TRANSFORMATION('','',#11,#191); +#43626 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #43627); +#43627 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('45','U1','',#5,#28287,$); +#43628 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#28289)); +#43629 = SHAPE_DEFINITION_REPRESENTATION(#43630,#43636); +#43630 = PRODUCT_DEFINITION_SHAPE('','',#43631); +#43631 = PRODUCT_DEFINITION('design','',#43632,#43635); +#43632 = PRODUCT_DEFINITION_FORMATION('','',#43633); +#43633 = PRODUCT('SOIC-16_3.9x9.9mm_P1.27mm','SOIC-16_3.9x9.9mm_P1.27mm' + ,'',(#43634)); +#43634 = PRODUCT_CONTEXT('',#2,'mechanical'); +#43635 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#43636 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#43637),#51843); +#43637 = MANIFOLD_SOLID_BREP('',#43638); +#43638 = CLOSED_SHELL('',(#43639,#43677,#43740,#43763,#43792,#43815, + #43966,#44117,#44140,#44163,#44180,#44203,#44291,#44307,#44337, + #44368,#44399,#44430,#44461,#44492,#44523,#44554,#44585,#44616, + #44647,#44678,#44709,#44740,#44771,#44802,#44819,#44836,#44867, + #44898,#44929,#44960,#44991,#45022,#45053,#45084,#45115,#45146, + #45177,#45208,#45239,#45270,#45301,#45331,#45354,#45377,#45394, + #45439,#45589,#45612,#45635,#45658,#45809,#45847,#45896,#45988, + #46013,#46097,#46119,#46211,#46236,#46320,#46342,#46434,#46459, + #46543,#46565,#46657,#46682,#46766,#46788,#46880,#46905,#46989, + #47011,#47103,#47128,#47212,#47234,#47326,#47351,#47435,#47452, + #47537,#47562,#47639,#47724,#47749,#47826,#47843,#47935,#47960, + #48044,#48066,#48158,#48183,#48267,#48289,#48381,#48406,#48490, + #48512,#48604,#48629,#48713,#48735,#48827,#48852,#48936,#48958, + #49050,#49075,#49159,#49181,#49273,#49298,#49382,#49399,#49418, + #49437,#49456,#49475,#49494,#49513,#49532,#49578,#49594,#49613, + #49632,#49651,#49670,#49689,#49708,#49727,#49743,#49760,#49772, + #49789,#49806,#49823,#49840,#49857,#49874,#49891,#49903,#49920, + #49937,#49954,#49971,#49988,#50005,#50022,#50034,#50051,#50068, + #50085,#50102,#50119,#50136,#50153,#50165,#50182,#50199,#50216, + #50233,#50250,#50267,#50284,#50296,#50313,#50330,#50347,#50364, + #50381,#50398,#50415,#50427,#50444,#50461,#50478,#50495,#50512, + #50529,#50546,#50558,#50575,#50592,#50609,#50626,#50643,#50660, + #50677,#50689,#50706,#50723,#50740,#50757,#50774,#50791,#50803, + #50820,#50837,#50854,#50871,#50888,#50905,#50917,#50934,#50951, + #50968,#50985,#51002,#51019,#51036,#51048,#51065,#51082,#51099, + #51116,#51133,#51150,#51167,#51179,#51196,#51213,#51230,#51247, + #51264,#51281,#51298,#51310,#51327,#51344,#51361,#51378,#51395, + #51412,#51429,#51441,#51458,#51475,#51492,#51509,#51526,#51543, + #51560,#51572,#51589,#51606,#51623,#51640,#51657,#51674,#51691, + #51703,#51720,#51737,#51754,#51771,#51788,#51805,#51822,#51834)); +#43639 = ADVANCED_FACE('',(#43640),#43672,.F.); +#43640 = FACE_BOUND('',#43641,.F.); +#43641 = EDGE_LOOP('',(#43642,#43652,#43659,#43667)); +#43642 = ORIENTED_EDGE('',*,*,#43643,.T.); +#43643 = EDGE_CURVE('',#43644,#43646,#43648,.T.); +#43644 = VERTEX_POINT('',#43645); +#43645 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#43646 = VERTEX_POINT('',#43647); +#43647 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#43648 = LINE('',#43649,#43650); +#43649 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#43650 = VECTOR('',#43651,1.); +#43651 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#43652 = ORIENTED_EDGE('',*,*,#43653,.T.); +#43653 = EDGE_CURVE('',#43646,#43654,#43656,.T.); +#43654 = VERTEX_POINT('',#43655); +#43655 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#43656 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#43657,#43658),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#43657 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#43658 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#43659 = ORIENTED_EDGE('',*,*,#43660,.F.); +#43660 = EDGE_CURVE('',#43661,#43654,#43663,.T.); +#43661 = VERTEX_POINT('',#43662); +#43662 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#43663 = LINE('',#43664,#43665); +#43664 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#43665 = VECTOR('',#43666,1.); +#43666 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#43667 = ORIENTED_EDGE('',*,*,#43668,.F.); +#43668 = EDGE_CURVE('',#43644,#43661,#43669,.T.); +#43669 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#43670,#43671),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#43670 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#43671 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#43672 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#43673,#43674) + ,(#43675,#43676 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#43673 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#43674 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#43675 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#43676 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#43677 = ADVANCED_FACE('',(#43678),#43735,.F.); +#43678 = FACE_BOUND('',#43679,.T.); +#43679 = EDGE_LOOP('',(#43680,#43681,#43689,#43697,#43705,#43713,#43721, + #43729)); +#43680 = ORIENTED_EDGE('',*,*,#43643,.T.); +#43681 = ORIENTED_EDGE('',*,*,#43682,.T.); +#43682 = EDGE_CURVE('',#43646,#43683,#43685,.T.); +#43683 = VERTEX_POINT('',#43684); +#43684 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#43685 = LINE('',#43686,#43687); +#43686 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#43687 = VECTOR('',#43688,1.); +#43688 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#43689 = ORIENTED_EDGE('',*,*,#43690,.T.); +#43690 = EDGE_CURVE('',#43683,#43691,#43693,.T.); +#43691 = VERTEX_POINT('',#43692); +#43692 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#43693 = LINE('',#43694,#43695); +#43694 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#43695 = VECTOR('',#43696,1.); +#43696 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#43697 = ORIENTED_EDGE('',*,*,#43698,.T.); +#43698 = EDGE_CURVE('',#43691,#43699,#43701,.T.); +#43699 = VERTEX_POINT('',#43700); +#43700 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#43701 = LINE('',#43702,#43703); +#43702 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#43703 = VECTOR('',#43704,1.); +#43704 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#43705 = ORIENTED_EDGE('',*,*,#43706,.T.); +#43706 = EDGE_CURVE('',#43699,#43707,#43709,.T.); +#43707 = VERTEX_POINT('',#43708); +#43708 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#43709 = LINE('',#43710,#43711); +#43710 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#43711 = VECTOR('',#43712,1.); +#43712 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#43713 = ORIENTED_EDGE('',*,*,#43714,.T.); +#43714 = EDGE_CURVE('',#43707,#43715,#43717,.T.); +#43715 = VERTEX_POINT('',#43716); +#43716 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#43717 = LINE('',#43718,#43719); +#43718 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#43719 = VECTOR('',#43720,1.); +#43720 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#43721 = ORIENTED_EDGE('',*,*,#43722,.T.); +#43722 = EDGE_CURVE('',#43715,#43723,#43725,.T.); +#43723 = VERTEX_POINT('',#43724); +#43724 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#43725 = LINE('',#43726,#43727); +#43726 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#43727 = VECTOR('',#43728,1.); +#43728 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43729 = ORIENTED_EDGE('',*,*,#43730,.T.); +#43730 = EDGE_CURVE('',#43723,#43644,#43731,.T.); +#43731 = LINE('',#43732,#43733); +#43732 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#43733 = VECTOR('',#43734,1.); +#43734 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#43735 = PLANE('',#43736); +#43736 = AXIS2_PLACEMENT_3D('',#43737,#43738,#43739); +#43737 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#43738 = DIRECTION('',(0.,0.,1.)); +#43739 = DIRECTION('',(0.334735188201,-0.942312237945,0.)); +#43740 = ADVANCED_FACE('',(#43741),#43758,.F.); +#43741 = FACE_BOUND('',#43742,.F.); +#43742 = EDGE_LOOP('',(#43743,#43744,#43751,#43757)); +#43743 = ORIENTED_EDGE('',*,*,#43682,.T.); +#43744 = ORIENTED_EDGE('',*,*,#43745,.T.); +#43745 = EDGE_CURVE('',#43683,#43746,#43748,.T.); +#43746 = VERTEX_POINT('',#43747); +#43747 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#43748 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#43749,#43750),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#43749 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#43750 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#43751 = ORIENTED_EDGE('',*,*,#43752,.F.); +#43752 = EDGE_CURVE('',#43654,#43746,#43753,.T.); +#43753 = LINE('',#43754,#43755); +#43754 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#43755 = VECTOR('',#43756,1.); +#43756 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#43757 = ORIENTED_EDGE('',*,*,#43653,.F.); +#43758 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#43759,#43760) + ,(#43761,#43762 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#43759 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#43760 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#43761 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#43762 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#43763 = ADVANCED_FACE('',(#43764),#43787,.F.); +#43764 = FACE_BOUND('',#43765,.F.); +#43765 = EDGE_LOOP('',(#43766,#43767,#43774,#43782)); +#43766 = ORIENTED_EDGE('',*,*,#43660,.T.); +#43767 = ORIENTED_EDGE('',*,*,#43768,.T.); +#43768 = EDGE_CURVE('',#43654,#43769,#43771,.T.); +#43769 = VERTEX_POINT('',#43770); +#43770 = CARTESIAN_POINT('',(1.775,4.95,1.025)); +#43771 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#43772,#43773),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#43772 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#43773 = CARTESIAN_POINT('',(1.775,4.95,1.025)); +#43774 = ORIENTED_EDGE('',*,*,#43775,.F.); +#43775 = EDGE_CURVE('',#43776,#43769,#43778,.T.); +#43776 = VERTEX_POINT('',#43777); +#43777 = CARTESIAN_POINT('',(-1.775,4.95,1.025)); +#43778 = LINE('',#43779,#43780); +#43779 = CARTESIAN_POINT('',(-1.775,4.95,1.025)); +#43780 = VECTOR('',#43781,1.); +#43781 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#43782 = ORIENTED_EDGE('',*,*,#43783,.F.); +#43783 = EDGE_CURVE('',#43661,#43776,#43784,.T.); +#43784 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#43785,#43786),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#43785 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#43786 = CARTESIAN_POINT('',(-1.775,4.95,1.025)); +#43787 = PLANE('',#43788); +#43788 = AXIS2_PLACEMENT_3D('',#43789,#43790,#43791); +#43789 = CARTESIAN_POINT('',(-1.775,4.95,1.025)); +#43790 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#43791 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#43792 = ADVANCED_FACE('',(#43793),#43810,.F.); +#43793 = FACE_BOUND('',#43794,.F.); +#43794 = EDGE_LOOP('',(#43795,#43796,#43797,#43805)); +#43795 = ORIENTED_EDGE('',*,*,#43730,.T.); +#43796 = ORIENTED_EDGE('',*,*,#43668,.T.); +#43797 = ORIENTED_EDGE('',*,*,#43798,.F.); +#43798 = EDGE_CURVE('',#43799,#43661,#43801,.T.); +#43799 = VERTEX_POINT('',#43800); +#43800 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#43801 = LINE('',#43802,#43803); +#43802 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#43803 = VECTOR('',#43804,1.); +#43804 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#43805 = ORIENTED_EDGE('',*,*,#43806,.F.); +#43806 = EDGE_CURVE('',#43723,#43799,#43807,.T.); +#43807 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#43808,#43809),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#43808 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#43809 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#43810 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#43811,#43812) + ,(#43813,#43814 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#43811 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#43812 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#43813 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#43814 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#43815 = ADVANCED_FACE('',(#43816),#43961,.F.); +#43816 = FACE_BOUND('',#43817,.F.); +#43817 = EDGE_LOOP('',(#43818,#43819,#43820,#43828,#43836,#43844,#43852, + #43860,#43868,#43876,#43884,#43892,#43900,#43908,#43916,#43924, + #43932,#43940,#43948,#43956)); +#43818 = ORIENTED_EDGE('',*,*,#43722,.T.); +#43819 = ORIENTED_EDGE('',*,*,#43806,.T.); +#43820 = ORIENTED_EDGE('',*,*,#43821,.F.); +#43821 = EDGE_CURVE('',#43822,#43799,#43824,.T.); +#43822 = VERTEX_POINT('',#43823); +#43823 = CARTESIAN_POINT('',(-1.95,4.65,0.825)); +#43824 = LINE('',#43825,#43826); +#43825 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43826 = VECTOR('',#43827,1.); +#43827 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43828 = ORIENTED_EDGE('',*,*,#43829,.F.); +#43829 = EDGE_CURVE('',#43830,#43822,#43832,.T.); +#43830 = VERTEX_POINT('',#43831); +#43831 = CARTESIAN_POINT('',(-1.95,4.24,0.825)); +#43832 = LINE('',#43833,#43834); +#43833 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43834 = VECTOR('',#43835,1.); +#43835 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43836 = ORIENTED_EDGE('',*,*,#43837,.F.); +#43837 = EDGE_CURVE('',#43838,#43830,#43840,.T.); +#43838 = VERTEX_POINT('',#43839); +#43839 = CARTESIAN_POINT('',(-1.95,3.38,0.825)); +#43840 = LINE('',#43841,#43842); +#43841 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43842 = VECTOR('',#43843,1.); +#43843 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43844 = ORIENTED_EDGE('',*,*,#43845,.F.); +#43845 = EDGE_CURVE('',#43846,#43838,#43848,.T.); +#43846 = VERTEX_POINT('',#43847); +#43847 = CARTESIAN_POINT('',(-1.95,2.97,0.825)); +#43848 = LINE('',#43849,#43850); +#43849 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43850 = VECTOR('',#43851,1.); +#43851 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43852 = ORIENTED_EDGE('',*,*,#43853,.F.); +#43853 = EDGE_CURVE('',#43854,#43846,#43856,.T.); +#43854 = VERTEX_POINT('',#43855); +#43855 = CARTESIAN_POINT('',(-1.95,2.11,0.825)); +#43856 = LINE('',#43857,#43858); +#43857 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43858 = VECTOR('',#43859,1.); +#43859 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43860 = ORIENTED_EDGE('',*,*,#43861,.F.); +#43861 = EDGE_CURVE('',#43862,#43854,#43864,.T.); +#43862 = VERTEX_POINT('',#43863); +#43863 = CARTESIAN_POINT('',(-1.95,1.7,0.825)); +#43864 = LINE('',#43865,#43866); +#43865 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43866 = VECTOR('',#43867,1.); +#43867 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43868 = ORIENTED_EDGE('',*,*,#43869,.F.); +#43869 = EDGE_CURVE('',#43870,#43862,#43872,.T.); +#43870 = VERTEX_POINT('',#43871); +#43871 = CARTESIAN_POINT('',(-1.95,0.84,0.825)); +#43872 = LINE('',#43873,#43874); +#43873 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43874 = VECTOR('',#43875,1.); +#43875 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43876 = ORIENTED_EDGE('',*,*,#43877,.F.); +#43877 = EDGE_CURVE('',#43878,#43870,#43880,.T.); +#43878 = VERTEX_POINT('',#43879); +#43879 = CARTESIAN_POINT('',(-1.95,0.43,0.825)); +#43880 = LINE('',#43881,#43882); +#43881 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43882 = VECTOR('',#43883,1.); +#43883 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43884 = ORIENTED_EDGE('',*,*,#43885,.F.); +#43885 = EDGE_CURVE('',#43886,#43878,#43888,.T.); +#43886 = VERTEX_POINT('',#43887); +#43887 = CARTESIAN_POINT('',(-1.95,-0.43,0.825)); +#43888 = LINE('',#43889,#43890); +#43889 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43890 = VECTOR('',#43891,1.); +#43891 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43892 = ORIENTED_EDGE('',*,*,#43893,.F.); +#43893 = EDGE_CURVE('',#43894,#43886,#43896,.T.); +#43894 = VERTEX_POINT('',#43895); +#43895 = CARTESIAN_POINT('',(-1.95,-0.84,0.825)); +#43896 = LINE('',#43897,#43898); +#43897 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43898 = VECTOR('',#43899,1.); +#43899 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43900 = ORIENTED_EDGE('',*,*,#43901,.F.); +#43901 = EDGE_CURVE('',#43902,#43894,#43904,.T.); +#43902 = VERTEX_POINT('',#43903); +#43903 = CARTESIAN_POINT('',(-1.95,-1.7,0.825)); +#43904 = LINE('',#43905,#43906); +#43905 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43906 = VECTOR('',#43907,1.); +#43907 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43908 = ORIENTED_EDGE('',*,*,#43909,.F.); +#43909 = EDGE_CURVE('',#43910,#43902,#43912,.T.); +#43910 = VERTEX_POINT('',#43911); +#43911 = CARTESIAN_POINT('',(-1.95,-2.11,0.825)); +#43912 = LINE('',#43913,#43914); +#43913 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43914 = VECTOR('',#43915,1.); +#43915 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43916 = ORIENTED_EDGE('',*,*,#43917,.F.); +#43917 = EDGE_CURVE('',#43918,#43910,#43920,.T.); +#43918 = VERTEX_POINT('',#43919); +#43919 = CARTESIAN_POINT('',(-1.95,-2.97,0.825)); +#43920 = LINE('',#43921,#43922); +#43921 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43922 = VECTOR('',#43923,1.); +#43923 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43924 = ORIENTED_EDGE('',*,*,#43925,.F.); +#43925 = EDGE_CURVE('',#43926,#43918,#43928,.T.); +#43926 = VERTEX_POINT('',#43927); +#43927 = CARTESIAN_POINT('',(-1.95,-3.38,0.825)); +#43928 = LINE('',#43929,#43930); +#43929 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43930 = VECTOR('',#43931,1.); +#43931 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43932 = ORIENTED_EDGE('',*,*,#43933,.F.); +#43933 = EDGE_CURVE('',#43934,#43926,#43936,.T.); +#43934 = VERTEX_POINT('',#43935); +#43935 = CARTESIAN_POINT('',(-1.95,-4.24,0.825)); +#43936 = LINE('',#43937,#43938); +#43937 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43938 = VECTOR('',#43939,1.); +#43939 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43940 = ORIENTED_EDGE('',*,*,#43941,.F.); +#43941 = EDGE_CURVE('',#43942,#43934,#43944,.T.); +#43942 = VERTEX_POINT('',#43943); +#43943 = CARTESIAN_POINT('',(-1.95,-4.65,0.825)); +#43944 = LINE('',#43945,#43946); +#43945 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43946 = VECTOR('',#43947,1.); +#43947 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43948 = ORIENTED_EDGE('',*,*,#43949,.F.); +#43949 = EDGE_CURVE('',#43950,#43942,#43952,.T.); +#43950 = VERTEX_POINT('',#43951); +#43951 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43952 = LINE('',#43953,#43954); +#43953 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43954 = VECTOR('',#43955,1.); +#43955 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#43956 = ORIENTED_EDGE('',*,*,#43957,.F.); +#43957 = EDGE_CURVE('',#43715,#43950,#43958,.T.); +#43958 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#43959,#43960),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#43959 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#43960 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43961 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#43962,#43963) + ,(#43964,#43965 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#43962 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#43963 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#43964 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#43965 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#43966 = ADVANCED_FACE('',(#43967),#44112,.F.); +#43967 = FACE_BOUND('',#43968,.F.); +#43968 = EDGE_LOOP('',(#43969,#43970,#43977,#43985,#43993,#44001,#44009, + #44017,#44025,#44033,#44041,#44049,#44057,#44065,#44073,#44081, + #44089,#44097,#44105,#44111)); +#43969 = ORIENTED_EDGE('',*,*,#43690,.T.); +#43970 = ORIENTED_EDGE('',*,*,#43971,.T.); +#43971 = EDGE_CURVE('',#43691,#43972,#43974,.T.); +#43972 = VERTEX_POINT('',#43973); +#43973 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#43974 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#43975,#43976),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#43975 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#43976 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#43977 = ORIENTED_EDGE('',*,*,#43978,.F.); +#43978 = EDGE_CURVE('',#43979,#43972,#43981,.T.); +#43979 = VERTEX_POINT('',#43980); +#43980 = CARTESIAN_POINT('',(1.95,-4.65,0.825)); +#43981 = LINE('',#43982,#43983); +#43982 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#43983 = VECTOR('',#43984,1.); +#43984 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#43985 = ORIENTED_EDGE('',*,*,#43986,.F.); +#43986 = EDGE_CURVE('',#43987,#43979,#43989,.T.); +#43987 = VERTEX_POINT('',#43988); +#43988 = CARTESIAN_POINT('',(1.95,-4.24,0.825)); +#43989 = LINE('',#43990,#43991); +#43990 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#43991 = VECTOR('',#43992,1.); +#43992 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#43993 = ORIENTED_EDGE('',*,*,#43994,.F.); +#43994 = EDGE_CURVE('',#43995,#43987,#43997,.T.); +#43995 = VERTEX_POINT('',#43996); +#43996 = CARTESIAN_POINT('',(1.95,-3.38,0.825)); +#43997 = LINE('',#43998,#43999); +#43998 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#43999 = VECTOR('',#44000,1.); +#44000 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44001 = ORIENTED_EDGE('',*,*,#44002,.F.); +#44002 = EDGE_CURVE('',#44003,#43995,#44005,.T.); +#44003 = VERTEX_POINT('',#44004); +#44004 = CARTESIAN_POINT('',(1.95,-2.97,0.825)); +#44005 = LINE('',#44006,#44007); +#44006 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44007 = VECTOR('',#44008,1.); +#44008 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44009 = ORIENTED_EDGE('',*,*,#44010,.F.); +#44010 = EDGE_CURVE('',#44011,#44003,#44013,.T.); +#44011 = VERTEX_POINT('',#44012); +#44012 = CARTESIAN_POINT('',(1.95,-2.11,0.825)); +#44013 = LINE('',#44014,#44015); +#44014 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44015 = VECTOR('',#44016,1.); +#44016 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44017 = ORIENTED_EDGE('',*,*,#44018,.F.); +#44018 = EDGE_CURVE('',#44019,#44011,#44021,.T.); +#44019 = VERTEX_POINT('',#44020); +#44020 = CARTESIAN_POINT('',(1.95,-1.7,0.825)); +#44021 = LINE('',#44022,#44023); +#44022 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44023 = VECTOR('',#44024,1.); +#44024 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44025 = ORIENTED_EDGE('',*,*,#44026,.F.); +#44026 = EDGE_CURVE('',#44027,#44019,#44029,.T.); +#44027 = VERTEX_POINT('',#44028); +#44028 = CARTESIAN_POINT('',(1.95,-0.84,0.825)); +#44029 = LINE('',#44030,#44031); +#44030 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44031 = VECTOR('',#44032,1.); +#44032 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44033 = ORIENTED_EDGE('',*,*,#44034,.F.); +#44034 = EDGE_CURVE('',#44035,#44027,#44037,.T.); +#44035 = VERTEX_POINT('',#44036); +#44036 = CARTESIAN_POINT('',(1.95,-0.43,0.825)); +#44037 = LINE('',#44038,#44039); +#44038 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44039 = VECTOR('',#44040,1.); +#44040 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44041 = ORIENTED_EDGE('',*,*,#44042,.F.); +#44042 = EDGE_CURVE('',#44043,#44035,#44045,.T.); +#44043 = VERTEX_POINT('',#44044); +#44044 = CARTESIAN_POINT('',(1.95,0.43,0.825)); +#44045 = LINE('',#44046,#44047); +#44046 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44047 = VECTOR('',#44048,1.); +#44048 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44049 = ORIENTED_EDGE('',*,*,#44050,.F.); +#44050 = EDGE_CURVE('',#44051,#44043,#44053,.T.); +#44051 = VERTEX_POINT('',#44052); +#44052 = CARTESIAN_POINT('',(1.95,0.84,0.825)); +#44053 = LINE('',#44054,#44055); +#44054 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44055 = VECTOR('',#44056,1.); +#44056 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44057 = ORIENTED_EDGE('',*,*,#44058,.F.); +#44058 = EDGE_CURVE('',#44059,#44051,#44061,.T.); +#44059 = VERTEX_POINT('',#44060); +#44060 = CARTESIAN_POINT('',(1.95,1.7,0.825)); +#44061 = LINE('',#44062,#44063); +#44062 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44063 = VECTOR('',#44064,1.); +#44064 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44065 = ORIENTED_EDGE('',*,*,#44066,.F.); +#44066 = EDGE_CURVE('',#44067,#44059,#44069,.T.); +#44067 = VERTEX_POINT('',#44068); +#44068 = CARTESIAN_POINT('',(1.95,2.11,0.825)); +#44069 = LINE('',#44070,#44071); +#44070 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44071 = VECTOR('',#44072,1.); +#44072 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44073 = ORIENTED_EDGE('',*,*,#44074,.F.); +#44074 = EDGE_CURVE('',#44075,#44067,#44077,.T.); +#44075 = VERTEX_POINT('',#44076); +#44076 = CARTESIAN_POINT('',(1.95,2.97,0.825)); +#44077 = LINE('',#44078,#44079); +#44078 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44079 = VECTOR('',#44080,1.); +#44080 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44081 = ORIENTED_EDGE('',*,*,#44082,.F.); +#44082 = EDGE_CURVE('',#44083,#44075,#44085,.T.); +#44083 = VERTEX_POINT('',#44084); +#44084 = CARTESIAN_POINT('',(1.95,3.38,0.825)); +#44085 = LINE('',#44086,#44087); +#44086 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44087 = VECTOR('',#44088,1.); +#44088 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44089 = ORIENTED_EDGE('',*,*,#44090,.F.); +#44090 = EDGE_CURVE('',#44091,#44083,#44093,.T.); +#44091 = VERTEX_POINT('',#44092); +#44092 = CARTESIAN_POINT('',(1.95,4.24,0.825)); +#44093 = LINE('',#44094,#44095); +#44094 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44095 = VECTOR('',#44096,1.); +#44096 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44097 = ORIENTED_EDGE('',*,*,#44098,.F.); +#44098 = EDGE_CURVE('',#44099,#44091,#44101,.T.); +#44099 = VERTEX_POINT('',#44100); +#44100 = CARTESIAN_POINT('',(1.95,4.65,0.825)); +#44101 = LINE('',#44102,#44103); +#44102 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44103 = VECTOR('',#44104,1.); +#44104 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44105 = ORIENTED_EDGE('',*,*,#44106,.F.); +#44106 = EDGE_CURVE('',#43746,#44099,#44107,.T.); +#44107 = LINE('',#44108,#44109); +#44108 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44109 = VECTOR('',#44110,1.); +#44110 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44111 = ORIENTED_EDGE('',*,*,#43745,.F.); +#44112 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#44113,#44114) + ,(#44115,#44116 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#44113 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#44114 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44115 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#44116 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#44117 = ADVANCED_FACE('',(#44118),#44135,.F.); +#44118 = FACE_BOUND('',#44119,.F.); +#44119 = EDGE_LOOP('',(#44120,#44121,#44122,#44130)); +#44120 = ORIENTED_EDGE('',*,*,#43714,.T.); +#44121 = ORIENTED_EDGE('',*,*,#43957,.T.); +#44122 = ORIENTED_EDGE('',*,*,#44123,.F.); +#44123 = EDGE_CURVE('',#44124,#43950,#44126,.T.); +#44124 = VERTEX_POINT('',#44125); +#44125 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#44126 = LINE('',#44127,#44128); +#44127 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#44128 = VECTOR('',#44129,1.); +#44129 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#44130 = ORIENTED_EDGE('',*,*,#44131,.F.); +#44131 = EDGE_CURVE('',#43707,#44124,#44132,.T.); +#44132 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#44133,#44134),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#44133 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#44134 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#44135 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#44136,#44137) + ,(#44138,#44139 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#44136 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#44137 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#44138 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#44139 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#44140 = ADVANCED_FACE('',(#44141),#44158,.F.); +#44141 = FACE_BOUND('',#44142,.F.); +#44142 = EDGE_LOOP('',(#44143,#44144,#44151,#44157)); +#44143 = ORIENTED_EDGE('',*,*,#43698,.T.); +#44144 = ORIENTED_EDGE('',*,*,#44145,.T.); +#44145 = EDGE_CURVE('',#43699,#44146,#44148,.T.); +#44146 = VERTEX_POINT('',#44147); +#44147 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#44148 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#44149,#44150),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#44149 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#44150 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#44151 = ORIENTED_EDGE('',*,*,#44152,.F.); +#44152 = EDGE_CURVE('',#43972,#44146,#44153,.T.); +#44153 = LINE('',#44154,#44155); +#44154 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#44155 = VECTOR('',#44156,1.); +#44156 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#44157 = ORIENTED_EDGE('',*,*,#43971,.F.); +#44158 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#44159,#44160) + ,(#44161,#44162 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#44159 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#44160 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#44161 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#44162 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#44163 = ADVANCED_FACE('',(#44164),#44175,.F.); +#44164 = FACE_BOUND('',#44165,.F.); +#44165 = EDGE_LOOP('',(#44166,#44167,#44168,#44174)); +#44166 = ORIENTED_EDGE('',*,*,#43706,.T.); +#44167 = ORIENTED_EDGE('',*,*,#44131,.T.); +#44168 = ORIENTED_EDGE('',*,*,#44169,.F.); +#44169 = EDGE_CURVE('',#44146,#44124,#44170,.T.); +#44170 = LINE('',#44171,#44172); +#44171 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#44172 = VECTOR('',#44173,1.); +#44173 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#44174 = ORIENTED_EDGE('',*,*,#44145,.F.); +#44175 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#44176,#44177) + ,(#44178,#44179 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#44176 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#44177 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#44178 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#44179 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#44180 = ADVANCED_FACE('',(#44181),#44198,.F.); +#44181 = FACE_BOUND('',#44182,.F.); +#44182 = EDGE_LOOP('',(#44183,#44184,#44191,#44197)); +#44183 = ORIENTED_EDGE('',*,*,#43752,.T.); +#44184 = ORIENTED_EDGE('',*,*,#44185,.T.); +#44185 = EDGE_CURVE('',#43746,#44186,#44188,.T.); +#44186 = VERTEX_POINT('',#44187); +#44187 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#44188 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#44189,#44190),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#44189 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#44190 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#44191 = ORIENTED_EDGE('',*,*,#44192,.F.); +#44192 = EDGE_CURVE('',#43769,#44186,#44193,.T.); +#44193 = LINE('',#44194,#44195); +#44194 = CARTESIAN_POINT('',(1.775,4.95,1.025)); +#44195 = VECTOR('',#44196,1.); +#44196 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#44197 = ORIENTED_EDGE('',*,*,#43768,.F.); +#44198 = PLANE('',#44199); +#44199 = AXIS2_PLACEMENT_3D('',#44200,#44201,#44202); +#44200 = CARTESIAN_POINT('',(1.775,4.95,1.025)); +#44201 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#44202 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#44203 = ADVANCED_FACE('',(#44204),#44286,.F.); +#44204 = FACE_BOUND('',#44205,.F.); +#44205 = EDGE_LOOP('',(#44206,#44214,#44215,#44216,#44224,#44232,#44240, + #44248,#44256,#44264,#44272,#44280)); +#44206 = ORIENTED_EDGE('',*,*,#44207,.T.); +#44207 = EDGE_CURVE('',#44208,#43776,#44210,.T.); +#44208 = VERTEX_POINT('',#44209); +#44209 = CARTESIAN_POINT('',(-1.95,4.775,1.025)); +#44210 = LINE('',#44211,#44212); +#44211 = CARTESIAN_POINT('',(-1.95,4.775,1.025)); +#44212 = VECTOR('',#44213,1.); +#44213 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#44214 = ORIENTED_EDGE('',*,*,#43775,.T.); +#44215 = ORIENTED_EDGE('',*,*,#44192,.T.); +#44216 = ORIENTED_EDGE('',*,*,#44217,.T.); +#44217 = EDGE_CURVE('',#44186,#44218,#44220,.T.); +#44218 = VERTEX_POINT('',#44219); +#44219 = CARTESIAN_POINT('',(1.95,4.65,1.025)); +#44220 = LINE('',#44221,#44222); +#44221 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#44222 = VECTOR('',#44223,1.); +#44223 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44224 = ORIENTED_EDGE('',*,*,#44225,.T.); +#44225 = EDGE_CURVE('',#44218,#44226,#44228,.T.); +#44226 = VERTEX_POINT('',#44227); +#44227 = CARTESIAN_POINT('',(1.875,4.65,1.025)); +#44228 = LINE('',#44229,#44230); +#44229 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#44230 = VECTOR('',#44231,1.); +#44231 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#44232 = ORIENTED_EDGE('',*,*,#44233,.F.); +#44233 = EDGE_CURVE('',#44234,#44226,#44236,.T.); +#44234 = VERTEX_POINT('',#44235); +#44235 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#44236 = LINE('',#44237,#44238); +#44237 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#44238 = VECTOR('',#44239,1.); +#44239 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44240 = ORIENTED_EDGE('',*,*,#44241,.F.); +#44241 = EDGE_CURVE('',#44242,#44234,#44244,.T.); +#44242 = VERTEX_POINT('',#44243); +#44243 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#44244 = LINE('',#44245,#44246); +#44245 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#44246 = VECTOR('',#44247,1.); +#44247 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#44248 = ORIENTED_EDGE('',*,*,#44249,.F.); +#44249 = EDGE_CURVE('',#44250,#44242,#44252,.T.); +#44250 = VERTEX_POINT('',#44251); +#44251 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#44252 = LINE('',#44253,#44254); +#44253 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#44254 = VECTOR('',#44255,1.); +#44255 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44256 = ORIENTED_EDGE('',*,*,#44257,.F.); +#44257 = EDGE_CURVE('',#44258,#44250,#44260,.T.); +#44258 = VERTEX_POINT('',#44259); +#44259 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#44260 = LINE('',#44261,#44262); +#44261 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#44262 = VECTOR('',#44263,1.); +#44263 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#44264 = ORIENTED_EDGE('',*,*,#44265,.F.); +#44265 = EDGE_CURVE('',#44266,#44258,#44268,.T.); +#44266 = VERTEX_POINT('',#44267); +#44267 = CARTESIAN_POINT('',(-1.875,4.65,1.025)); +#44268 = LINE('',#44269,#44270); +#44269 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#44270 = VECTOR('',#44271,1.); +#44271 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44272 = ORIENTED_EDGE('',*,*,#44273,.F.); +#44273 = EDGE_CURVE('',#44274,#44266,#44276,.T.); +#44274 = VERTEX_POINT('',#44275); +#44275 = CARTESIAN_POINT('',(-1.95,4.65,1.025)); +#44276 = LINE('',#44277,#44278); +#44277 = CARTESIAN_POINT('',(-2.2,4.65,1.025)); +#44278 = VECTOR('',#44279,1.); +#44279 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#44280 = ORIENTED_EDGE('',*,*,#44281,.T.); +#44281 = EDGE_CURVE('',#44274,#44208,#44282,.T.); +#44282 = LINE('',#44283,#44284); +#44283 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44284 = VECTOR('',#44285,1.); +#44285 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44286 = PLANE('',#44287); +#44287 = AXIS2_PLACEMENT_3D('',#44288,#44289,#44290); +#44288 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#44289 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#44290 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#44291 = ADVANCED_FACE('',(#44292),#44302,.F.); +#44292 = FACE_BOUND('',#44293,.F.); +#44293 = EDGE_LOOP('',(#44294,#44295,#44296,#44297)); +#44294 = ORIENTED_EDGE('',*,*,#43798,.T.); +#44295 = ORIENTED_EDGE('',*,*,#43783,.T.); +#44296 = ORIENTED_EDGE('',*,*,#44207,.F.); +#44297 = ORIENTED_EDGE('',*,*,#44298,.F.); +#44298 = EDGE_CURVE('',#43799,#44208,#44299,.T.); +#44299 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#44300,#44301),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#44300 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#44301 = CARTESIAN_POINT('',(-1.95,4.775,1.025)); +#44302 = PLANE('',#44303); +#44303 = AXIS2_PLACEMENT_3D('',#44304,#44305,#44306); +#44304 = CARTESIAN_POINT('',(-1.95,4.775,1.025)); +#44305 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#44306 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#44307 = ADVANCED_FACE('',(#44308),#44332,.F.); +#44308 = FACE_BOUND('',#44309,.F.); +#44309 = EDGE_LOOP('',(#44310,#44317,#44318,#44326)); +#44310 = ORIENTED_EDGE('',*,*,#44311,.F.); +#44311 = EDGE_CURVE('',#43950,#44312,#44314,.T.); +#44312 = VERTEX_POINT('',#44313); +#44313 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44314 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#44315,#44316),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#44315 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#44316 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44317 = ORIENTED_EDGE('',*,*,#43949,.T.); +#44318 = ORIENTED_EDGE('',*,*,#44319,.T.); +#44319 = EDGE_CURVE('',#43942,#44320,#44322,.T.); +#44320 = VERTEX_POINT('',#44321); +#44321 = CARTESIAN_POINT('',(-1.95,-4.65,1.025)); +#44322 = LINE('',#44323,#44324); +#44323 = CARTESIAN_POINT('',(-1.95,-4.65,0.776557752994)); +#44324 = VECTOR('',#44325,1.); +#44325 = DIRECTION('',(0.,0.,1.)); +#44326 = ORIENTED_EDGE('',*,*,#44327,.F.); +#44327 = EDGE_CURVE('',#44312,#44320,#44328,.T.); +#44328 = LINE('',#44329,#44330); +#44329 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44330 = VECTOR('',#44331,1.); +#44331 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44332 = PLANE('',#44333); +#44333 = AXIS2_PLACEMENT_3D('',#44334,#44335,#44336); +#44334 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44335 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44336 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44337 = ADVANCED_FACE('',(#44338),#44363,.F.); +#44338 = FACE_BOUND('',#44339,.F.); +#44339 = EDGE_LOOP('',(#44340,#44348,#44349,#44357)); +#44340 = ORIENTED_EDGE('',*,*,#44341,.F.); +#44341 = EDGE_CURVE('',#43942,#44342,#44344,.T.); +#44342 = VERTEX_POINT('',#44343); +#44343 = CARTESIAN_POINT('',(-2.2,-4.65,0.825)); +#44344 = LINE('',#44345,#44346); +#44345 = CARTESIAN_POINT('',(-1.8,-4.65,0.825)); +#44346 = VECTOR('',#44347,1.); +#44347 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44348 = ORIENTED_EDGE('',*,*,#43941,.T.); +#44349 = ORIENTED_EDGE('',*,*,#44350,.T.); +#44350 = EDGE_CURVE('',#43934,#44351,#44353,.T.); +#44351 = VERTEX_POINT('',#44352); +#44352 = CARTESIAN_POINT('',(-2.2,-4.24,0.825)); +#44353 = LINE('',#44354,#44355); +#44354 = CARTESIAN_POINT('',(-1.8,-4.24,0.825)); +#44355 = VECTOR('',#44356,1.); +#44356 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44357 = ORIENTED_EDGE('',*,*,#44358,.F.); +#44358 = EDGE_CURVE('',#44342,#44351,#44359,.T.); +#44359 = LINE('',#44360,#44361); +#44360 = CARTESIAN_POINT('',(-2.2,-4.65,0.825)); +#44361 = VECTOR('',#44362,1.); +#44362 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#44363 = PLANE('',#44364); +#44364 = AXIS2_PLACEMENT_3D('',#44365,#44366,#44367); +#44365 = CARTESIAN_POINT('',(-1.8,-4.65,0.825)); +#44366 = DIRECTION('',(0.,0.,1.)); +#44367 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44368 = ADVANCED_FACE('',(#44369),#44394,.F.); +#44369 = FACE_BOUND('',#44370,.F.); +#44370 = EDGE_LOOP('',(#44371,#44379,#44380,#44388)); +#44371 = ORIENTED_EDGE('',*,*,#44372,.F.); +#44372 = EDGE_CURVE('',#43934,#44373,#44375,.T.); +#44373 = VERTEX_POINT('',#44374); +#44374 = CARTESIAN_POINT('',(-1.95,-4.24,1.025)); +#44375 = LINE('',#44376,#44377); +#44376 = CARTESIAN_POINT('',(-1.95,-4.24,0.776557752994)); +#44377 = VECTOR('',#44378,1.); +#44378 = DIRECTION('',(0.,0.,1.)); +#44379 = ORIENTED_EDGE('',*,*,#43933,.T.); +#44380 = ORIENTED_EDGE('',*,*,#44381,.T.); +#44381 = EDGE_CURVE('',#43926,#44382,#44384,.T.); +#44382 = VERTEX_POINT('',#44383); +#44383 = CARTESIAN_POINT('',(-1.95,-3.38,1.025)); +#44384 = LINE('',#44385,#44386); +#44385 = CARTESIAN_POINT('',(-1.95,-3.38,0.776557752994)); +#44386 = VECTOR('',#44387,1.); +#44387 = DIRECTION('',(0.,0.,1.)); +#44388 = ORIENTED_EDGE('',*,*,#44389,.F.); +#44389 = EDGE_CURVE('',#44373,#44382,#44390,.T.); +#44390 = LINE('',#44391,#44392); +#44391 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44392 = VECTOR('',#44393,1.); +#44393 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44394 = PLANE('',#44395); +#44395 = AXIS2_PLACEMENT_3D('',#44396,#44397,#44398); +#44396 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44397 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44398 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44399 = ADVANCED_FACE('',(#44400),#44425,.F.); +#44400 = FACE_BOUND('',#44401,.F.); +#44401 = EDGE_LOOP('',(#44402,#44410,#44411,#44419)); +#44402 = ORIENTED_EDGE('',*,*,#44403,.F.); +#44403 = EDGE_CURVE('',#43926,#44404,#44406,.T.); +#44404 = VERTEX_POINT('',#44405); +#44405 = CARTESIAN_POINT('',(-2.2,-3.38,0.825)); +#44406 = LINE('',#44407,#44408); +#44407 = CARTESIAN_POINT('',(-1.8,-3.38,0.825)); +#44408 = VECTOR('',#44409,1.); +#44409 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44410 = ORIENTED_EDGE('',*,*,#43925,.T.); +#44411 = ORIENTED_EDGE('',*,*,#44412,.T.); +#44412 = EDGE_CURVE('',#43918,#44413,#44415,.T.); +#44413 = VERTEX_POINT('',#44414); +#44414 = CARTESIAN_POINT('',(-2.2,-2.97,0.825)); +#44415 = LINE('',#44416,#44417); +#44416 = CARTESIAN_POINT('',(-1.8,-2.97,0.825)); +#44417 = VECTOR('',#44418,1.); +#44418 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44419 = ORIENTED_EDGE('',*,*,#44420,.F.); +#44420 = EDGE_CURVE('',#44404,#44413,#44421,.T.); +#44421 = LINE('',#44422,#44423); +#44422 = CARTESIAN_POINT('',(-2.2,-3.38,0.825)); +#44423 = VECTOR('',#44424,1.); +#44424 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#44425 = PLANE('',#44426); +#44426 = AXIS2_PLACEMENT_3D('',#44427,#44428,#44429); +#44427 = CARTESIAN_POINT('',(-1.8,-3.38,0.825)); +#44428 = DIRECTION('',(0.,0.,1.)); +#44429 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44430 = ADVANCED_FACE('',(#44431),#44456,.F.); +#44431 = FACE_BOUND('',#44432,.F.); +#44432 = EDGE_LOOP('',(#44433,#44441,#44442,#44450)); +#44433 = ORIENTED_EDGE('',*,*,#44434,.F.); +#44434 = EDGE_CURVE('',#43918,#44435,#44437,.T.); +#44435 = VERTEX_POINT('',#44436); +#44436 = CARTESIAN_POINT('',(-1.95,-2.97,1.025)); +#44437 = LINE('',#44438,#44439); +#44438 = CARTESIAN_POINT('',(-1.95,-2.97,0.776557752994)); +#44439 = VECTOR('',#44440,1.); +#44440 = DIRECTION('',(0.,0.,1.)); +#44441 = ORIENTED_EDGE('',*,*,#43917,.T.); +#44442 = ORIENTED_EDGE('',*,*,#44443,.T.); +#44443 = EDGE_CURVE('',#43910,#44444,#44446,.T.); +#44444 = VERTEX_POINT('',#44445); +#44445 = CARTESIAN_POINT('',(-1.95,-2.11,1.025)); +#44446 = LINE('',#44447,#44448); +#44447 = CARTESIAN_POINT('',(-1.95,-2.11,0.776557752994)); +#44448 = VECTOR('',#44449,1.); +#44449 = DIRECTION('',(0.,0.,1.)); +#44450 = ORIENTED_EDGE('',*,*,#44451,.F.); +#44451 = EDGE_CURVE('',#44435,#44444,#44452,.T.); +#44452 = LINE('',#44453,#44454); +#44453 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44454 = VECTOR('',#44455,1.); +#44455 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44456 = PLANE('',#44457); +#44457 = AXIS2_PLACEMENT_3D('',#44458,#44459,#44460); +#44458 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44459 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44460 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44461 = ADVANCED_FACE('',(#44462),#44487,.F.); +#44462 = FACE_BOUND('',#44463,.F.); +#44463 = EDGE_LOOP('',(#44464,#44472,#44473,#44481)); +#44464 = ORIENTED_EDGE('',*,*,#44465,.F.); +#44465 = EDGE_CURVE('',#43910,#44466,#44468,.T.); +#44466 = VERTEX_POINT('',#44467); +#44467 = CARTESIAN_POINT('',(-2.2,-2.11,0.825)); +#44468 = LINE('',#44469,#44470); +#44469 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#44470 = VECTOR('',#44471,1.); +#44471 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44472 = ORIENTED_EDGE('',*,*,#43909,.T.); +#44473 = ORIENTED_EDGE('',*,*,#44474,.T.); +#44474 = EDGE_CURVE('',#43902,#44475,#44477,.T.); +#44475 = VERTEX_POINT('',#44476); +#44476 = CARTESIAN_POINT('',(-2.2,-1.7,0.825)); +#44477 = LINE('',#44478,#44479); +#44478 = CARTESIAN_POINT('',(-1.8,-1.7,0.825)); +#44479 = VECTOR('',#44480,1.); +#44480 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44481 = ORIENTED_EDGE('',*,*,#44482,.F.); +#44482 = EDGE_CURVE('',#44466,#44475,#44483,.T.); +#44483 = LINE('',#44484,#44485); +#44484 = CARTESIAN_POINT('',(-2.2,-2.11,0.825)); +#44485 = VECTOR('',#44486,1.); +#44486 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#44487 = PLANE('',#44488); +#44488 = AXIS2_PLACEMENT_3D('',#44489,#44490,#44491); +#44489 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#44490 = DIRECTION('',(0.,0.,1.)); +#44491 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44492 = ADVANCED_FACE('',(#44493),#44518,.F.); +#44493 = FACE_BOUND('',#44494,.F.); +#44494 = EDGE_LOOP('',(#44495,#44503,#44504,#44512)); +#44495 = ORIENTED_EDGE('',*,*,#44496,.F.); +#44496 = EDGE_CURVE('',#43902,#44497,#44499,.T.); +#44497 = VERTEX_POINT('',#44498); +#44498 = CARTESIAN_POINT('',(-1.95,-1.7,1.025)); +#44499 = LINE('',#44500,#44501); +#44500 = CARTESIAN_POINT('',(-1.95,-1.7,0.776557752994)); +#44501 = VECTOR('',#44502,1.); +#44502 = DIRECTION('',(0.,0.,1.)); +#44503 = ORIENTED_EDGE('',*,*,#43901,.T.); +#44504 = ORIENTED_EDGE('',*,*,#44505,.T.); +#44505 = EDGE_CURVE('',#43894,#44506,#44508,.T.); +#44506 = VERTEX_POINT('',#44507); +#44507 = CARTESIAN_POINT('',(-1.95,-0.84,1.025)); +#44508 = LINE('',#44509,#44510); +#44509 = CARTESIAN_POINT('',(-1.95,-0.84,0.776557752994)); +#44510 = VECTOR('',#44511,1.); +#44511 = DIRECTION('',(0.,0.,1.)); +#44512 = ORIENTED_EDGE('',*,*,#44513,.F.); +#44513 = EDGE_CURVE('',#44497,#44506,#44514,.T.); +#44514 = LINE('',#44515,#44516); +#44515 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44516 = VECTOR('',#44517,1.); +#44517 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44518 = PLANE('',#44519); +#44519 = AXIS2_PLACEMENT_3D('',#44520,#44521,#44522); +#44520 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44521 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44522 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44523 = ADVANCED_FACE('',(#44524),#44549,.F.); +#44524 = FACE_BOUND('',#44525,.F.); +#44525 = EDGE_LOOP('',(#44526,#44534,#44535,#44543)); +#44526 = ORIENTED_EDGE('',*,*,#44527,.F.); +#44527 = EDGE_CURVE('',#43894,#44528,#44530,.T.); +#44528 = VERTEX_POINT('',#44529); +#44529 = CARTESIAN_POINT('',(-2.2,-0.84,0.825)); +#44530 = LINE('',#44531,#44532); +#44531 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#44532 = VECTOR('',#44533,1.); +#44533 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44534 = ORIENTED_EDGE('',*,*,#43893,.T.); +#44535 = ORIENTED_EDGE('',*,*,#44536,.T.); +#44536 = EDGE_CURVE('',#43886,#44537,#44539,.T.); +#44537 = VERTEX_POINT('',#44538); +#44538 = CARTESIAN_POINT('',(-2.2,-0.43,0.825)); +#44539 = LINE('',#44540,#44541); +#44540 = CARTESIAN_POINT('',(-1.8,-0.43,0.825)); +#44541 = VECTOR('',#44542,1.); +#44542 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44543 = ORIENTED_EDGE('',*,*,#44544,.F.); +#44544 = EDGE_CURVE('',#44528,#44537,#44545,.T.); +#44545 = LINE('',#44546,#44547); +#44546 = CARTESIAN_POINT('',(-2.2,-0.84,0.825)); +#44547 = VECTOR('',#44548,1.); +#44548 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#44549 = PLANE('',#44550); +#44550 = AXIS2_PLACEMENT_3D('',#44551,#44552,#44553); +#44551 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#44552 = DIRECTION('',(0.,0.,1.)); +#44553 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44554 = ADVANCED_FACE('',(#44555),#44580,.F.); +#44555 = FACE_BOUND('',#44556,.F.); +#44556 = EDGE_LOOP('',(#44557,#44565,#44566,#44574)); +#44557 = ORIENTED_EDGE('',*,*,#44558,.F.); +#44558 = EDGE_CURVE('',#43886,#44559,#44561,.T.); +#44559 = VERTEX_POINT('',#44560); +#44560 = CARTESIAN_POINT('',(-1.95,-0.43,1.025)); +#44561 = LINE('',#44562,#44563); +#44562 = CARTESIAN_POINT('',(-1.95,-0.43,0.776557752994)); +#44563 = VECTOR('',#44564,1.); +#44564 = DIRECTION('',(0.,0.,1.)); +#44565 = ORIENTED_EDGE('',*,*,#43885,.T.); +#44566 = ORIENTED_EDGE('',*,*,#44567,.T.); +#44567 = EDGE_CURVE('',#43878,#44568,#44570,.T.); +#44568 = VERTEX_POINT('',#44569); +#44569 = CARTESIAN_POINT('',(-1.95,0.43,1.025)); +#44570 = LINE('',#44571,#44572); +#44571 = CARTESIAN_POINT('',(-1.95,0.43,0.776557752994)); +#44572 = VECTOR('',#44573,1.); +#44573 = DIRECTION('',(0.,0.,1.)); +#44574 = ORIENTED_EDGE('',*,*,#44575,.F.); +#44575 = EDGE_CURVE('',#44559,#44568,#44576,.T.); +#44576 = LINE('',#44577,#44578); +#44577 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44578 = VECTOR('',#44579,1.); +#44579 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44580 = PLANE('',#44581); +#44581 = AXIS2_PLACEMENT_3D('',#44582,#44583,#44584); +#44582 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44583 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44584 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44585 = ADVANCED_FACE('',(#44586),#44611,.F.); +#44586 = FACE_BOUND('',#44587,.F.); +#44587 = EDGE_LOOP('',(#44588,#44596,#44597,#44605)); +#44588 = ORIENTED_EDGE('',*,*,#44589,.F.); +#44589 = EDGE_CURVE('',#43878,#44590,#44592,.T.); +#44590 = VERTEX_POINT('',#44591); +#44591 = CARTESIAN_POINT('',(-2.2,0.43,0.825)); +#44592 = LINE('',#44593,#44594); +#44593 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#44594 = VECTOR('',#44595,1.); +#44595 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44596 = ORIENTED_EDGE('',*,*,#43877,.T.); +#44597 = ORIENTED_EDGE('',*,*,#44598,.T.); +#44598 = EDGE_CURVE('',#43870,#44599,#44601,.T.); +#44599 = VERTEX_POINT('',#44600); +#44600 = CARTESIAN_POINT('',(-2.2,0.84,0.825)); +#44601 = LINE('',#44602,#44603); +#44602 = CARTESIAN_POINT('',(-1.8,0.84,0.825)); +#44603 = VECTOR('',#44604,1.); +#44604 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44605 = ORIENTED_EDGE('',*,*,#44606,.F.); +#44606 = EDGE_CURVE('',#44590,#44599,#44607,.T.); +#44607 = LINE('',#44608,#44609); +#44608 = CARTESIAN_POINT('',(-2.2,0.43,0.825)); +#44609 = VECTOR('',#44610,1.); +#44610 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#44611 = PLANE('',#44612); +#44612 = AXIS2_PLACEMENT_3D('',#44613,#44614,#44615); +#44613 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#44614 = DIRECTION('',(0.,0.,1.)); +#44615 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44616 = ADVANCED_FACE('',(#44617),#44642,.F.); +#44617 = FACE_BOUND('',#44618,.F.); +#44618 = EDGE_LOOP('',(#44619,#44627,#44628,#44636)); +#44619 = ORIENTED_EDGE('',*,*,#44620,.F.); +#44620 = EDGE_CURVE('',#43870,#44621,#44623,.T.); +#44621 = VERTEX_POINT('',#44622); +#44622 = CARTESIAN_POINT('',(-1.95,0.84,1.025)); +#44623 = LINE('',#44624,#44625); +#44624 = CARTESIAN_POINT('',(-1.95,0.84,0.776557752994)); +#44625 = VECTOR('',#44626,1.); +#44626 = DIRECTION('',(0.,0.,1.)); +#44627 = ORIENTED_EDGE('',*,*,#43869,.T.); +#44628 = ORIENTED_EDGE('',*,*,#44629,.T.); +#44629 = EDGE_CURVE('',#43862,#44630,#44632,.T.); +#44630 = VERTEX_POINT('',#44631); +#44631 = CARTESIAN_POINT('',(-1.95,1.7,1.025)); +#44632 = LINE('',#44633,#44634); +#44633 = CARTESIAN_POINT('',(-1.95,1.7,0.776557752994)); +#44634 = VECTOR('',#44635,1.); +#44635 = DIRECTION('',(0.,0.,1.)); +#44636 = ORIENTED_EDGE('',*,*,#44637,.F.); +#44637 = EDGE_CURVE('',#44621,#44630,#44638,.T.); +#44638 = LINE('',#44639,#44640); +#44639 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44640 = VECTOR('',#44641,1.); +#44641 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44642 = PLANE('',#44643); +#44643 = AXIS2_PLACEMENT_3D('',#44644,#44645,#44646); +#44644 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44645 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44646 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44647 = ADVANCED_FACE('',(#44648),#44673,.F.); +#44648 = FACE_BOUND('',#44649,.F.); +#44649 = EDGE_LOOP('',(#44650,#44658,#44659,#44667)); +#44650 = ORIENTED_EDGE('',*,*,#44651,.F.); +#44651 = EDGE_CURVE('',#43862,#44652,#44654,.T.); +#44652 = VERTEX_POINT('',#44653); +#44653 = CARTESIAN_POINT('',(-2.2,1.7,0.825)); +#44654 = LINE('',#44655,#44656); +#44655 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#44656 = VECTOR('',#44657,1.); +#44657 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44658 = ORIENTED_EDGE('',*,*,#43861,.T.); +#44659 = ORIENTED_EDGE('',*,*,#44660,.T.); +#44660 = EDGE_CURVE('',#43854,#44661,#44663,.T.); +#44661 = VERTEX_POINT('',#44662); +#44662 = CARTESIAN_POINT('',(-2.2,2.11,0.825)); +#44663 = LINE('',#44664,#44665); +#44664 = CARTESIAN_POINT('',(-1.8,2.11,0.825)); +#44665 = VECTOR('',#44666,1.); +#44666 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44667 = ORIENTED_EDGE('',*,*,#44668,.F.); +#44668 = EDGE_CURVE('',#44652,#44661,#44669,.T.); +#44669 = LINE('',#44670,#44671); +#44670 = CARTESIAN_POINT('',(-2.2,1.7,0.825)); +#44671 = VECTOR('',#44672,1.); +#44672 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#44673 = PLANE('',#44674); +#44674 = AXIS2_PLACEMENT_3D('',#44675,#44676,#44677); +#44675 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#44676 = DIRECTION('',(0.,0.,1.)); +#44677 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44678 = ADVANCED_FACE('',(#44679),#44704,.F.); +#44679 = FACE_BOUND('',#44680,.F.); +#44680 = EDGE_LOOP('',(#44681,#44689,#44690,#44698)); +#44681 = ORIENTED_EDGE('',*,*,#44682,.F.); +#44682 = EDGE_CURVE('',#43854,#44683,#44685,.T.); +#44683 = VERTEX_POINT('',#44684); +#44684 = CARTESIAN_POINT('',(-1.95,2.11,1.025)); +#44685 = LINE('',#44686,#44687); +#44686 = CARTESIAN_POINT('',(-1.95,2.11,0.776557752994)); +#44687 = VECTOR('',#44688,1.); +#44688 = DIRECTION('',(0.,0.,1.)); +#44689 = ORIENTED_EDGE('',*,*,#43853,.T.); +#44690 = ORIENTED_EDGE('',*,*,#44691,.T.); +#44691 = EDGE_CURVE('',#43846,#44692,#44694,.T.); +#44692 = VERTEX_POINT('',#44693); +#44693 = CARTESIAN_POINT('',(-1.95,2.97,1.025)); +#44694 = LINE('',#44695,#44696); +#44695 = CARTESIAN_POINT('',(-1.95,2.97,0.776557752994)); +#44696 = VECTOR('',#44697,1.); +#44697 = DIRECTION('',(0.,0.,1.)); +#44698 = ORIENTED_EDGE('',*,*,#44699,.F.); +#44699 = EDGE_CURVE('',#44683,#44692,#44700,.T.); +#44700 = LINE('',#44701,#44702); +#44701 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44702 = VECTOR('',#44703,1.); +#44703 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44704 = PLANE('',#44705); +#44705 = AXIS2_PLACEMENT_3D('',#44706,#44707,#44708); +#44706 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44707 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44708 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44709 = ADVANCED_FACE('',(#44710),#44735,.F.); +#44710 = FACE_BOUND('',#44711,.F.); +#44711 = EDGE_LOOP('',(#44712,#44720,#44721,#44729)); +#44712 = ORIENTED_EDGE('',*,*,#44713,.F.); +#44713 = EDGE_CURVE('',#43846,#44714,#44716,.T.); +#44714 = VERTEX_POINT('',#44715); +#44715 = CARTESIAN_POINT('',(-2.2,2.97,0.825)); +#44716 = LINE('',#44717,#44718); +#44717 = CARTESIAN_POINT('',(-1.8,2.97,0.825)); +#44718 = VECTOR('',#44719,1.); +#44719 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44720 = ORIENTED_EDGE('',*,*,#43845,.T.); +#44721 = ORIENTED_EDGE('',*,*,#44722,.T.); +#44722 = EDGE_CURVE('',#43838,#44723,#44725,.T.); +#44723 = VERTEX_POINT('',#44724); +#44724 = CARTESIAN_POINT('',(-2.2,3.38,0.825)); +#44725 = LINE('',#44726,#44727); +#44726 = CARTESIAN_POINT('',(-1.8,3.38,0.825)); +#44727 = VECTOR('',#44728,1.); +#44728 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44729 = ORIENTED_EDGE('',*,*,#44730,.F.); +#44730 = EDGE_CURVE('',#44714,#44723,#44731,.T.); +#44731 = LINE('',#44732,#44733); +#44732 = CARTESIAN_POINT('',(-2.2,2.97,0.825)); +#44733 = VECTOR('',#44734,1.); +#44734 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#44735 = PLANE('',#44736); +#44736 = AXIS2_PLACEMENT_3D('',#44737,#44738,#44739); +#44737 = CARTESIAN_POINT('',(-1.8,2.97,0.825)); +#44738 = DIRECTION('',(0.,0.,1.)); +#44739 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44740 = ADVANCED_FACE('',(#44741),#44766,.F.); +#44741 = FACE_BOUND('',#44742,.F.); +#44742 = EDGE_LOOP('',(#44743,#44751,#44752,#44760)); +#44743 = ORIENTED_EDGE('',*,*,#44744,.F.); +#44744 = EDGE_CURVE('',#43838,#44745,#44747,.T.); +#44745 = VERTEX_POINT('',#44746); +#44746 = CARTESIAN_POINT('',(-1.95,3.38,1.025)); +#44747 = LINE('',#44748,#44749); +#44748 = CARTESIAN_POINT('',(-1.95,3.38,0.776557752994)); +#44749 = VECTOR('',#44750,1.); +#44750 = DIRECTION('',(0.,0.,1.)); +#44751 = ORIENTED_EDGE('',*,*,#43837,.T.); +#44752 = ORIENTED_EDGE('',*,*,#44753,.T.); +#44753 = EDGE_CURVE('',#43830,#44754,#44756,.T.); +#44754 = VERTEX_POINT('',#44755); +#44755 = CARTESIAN_POINT('',(-1.95,4.24,1.025)); +#44756 = LINE('',#44757,#44758); +#44757 = CARTESIAN_POINT('',(-1.95,4.24,0.776557752994)); +#44758 = VECTOR('',#44759,1.); +#44759 = DIRECTION('',(0.,0.,1.)); +#44760 = ORIENTED_EDGE('',*,*,#44761,.F.); +#44761 = EDGE_CURVE('',#44745,#44754,#44762,.T.); +#44762 = LINE('',#44763,#44764); +#44763 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44764 = VECTOR('',#44765,1.); +#44765 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44766 = PLANE('',#44767); +#44767 = AXIS2_PLACEMENT_3D('',#44768,#44769,#44770); +#44768 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44769 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44770 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44771 = ADVANCED_FACE('',(#44772),#44797,.F.); +#44772 = FACE_BOUND('',#44773,.F.); +#44773 = EDGE_LOOP('',(#44774,#44782,#44783,#44791)); +#44774 = ORIENTED_EDGE('',*,*,#44775,.F.); +#44775 = EDGE_CURVE('',#43830,#44776,#44778,.T.); +#44776 = VERTEX_POINT('',#44777); +#44777 = CARTESIAN_POINT('',(-2.2,4.24,0.825)); +#44778 = LINE('',#44779,#44780); +#44779 = CARTESIAN_POINT('',(-1.8,4.24,0.825)); +#44780 = VECTOR('',#44781,1.); +#44781 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44782 = ORIENTED_EDGE('',*,*,#43829,.T.); +#44783 = ORIENTED_EDGE('',*,*,#44784,.T.); +#44784 = EDGE_CURVE('',#43822,#44785,#44787,.T.); +#44785 = VERTEX_POINT('',#44786); +#44786 = CARTESIAN_POINT('',(-2.2,4.65,0.825)); +#44787 = LINE('',#44788,#44789); +#44788 = CARTESIAN_POINT('',(-1.8,4.65,0.825)); +#44789 = VECTOR('',#44790,1.); +#44790 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44791 = ORIENTED_EDGE('',*,*,#44792,.F.); +#44792 = EDGE_CURVE('',#44776,#44785,#44793,.T.); +#44793 = LINE('',#44794,#44795); +#44794 = CARTESIAN_POINT('',(-2.2,4.24,0.825)); +#44795 = VECTOR('',#44796,1.); +#44796 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#44797 = PLANE('',#44798); +#44798 = AXIS2_PLACEMENT_3D('',#44799,#44800,#44801); +#44799 = CARTESIAN_POINT('',(-1.8,4.24,0.825)); +#44800 = DIRECTION('',(0.,0.,1.)); +#44801 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#44802 = ADVANCED_FACE('',(#44803),#44814,.F.); +#44803 = FACE_BOUND('',#44804,.F.); +#44804 = EDGE_LOOP('',(#44805,#44811,#44812,#44813)); +#44805 = ORIENTED_EDGE('',*,*,#44806,.F.); +#44806 = EDGE_CURVE('',#43822,#44274,#44807,.T.); +#44807 = LINE('',#44808,#44809); +#44808 = CARTESIAN_POINT('',(-1.95,4.65,0.776557752994)); +#44809 = VECTOR('',#44810,1.); +#44810 = DIRECTION('',(0.,0.,1.)); +#44811 = ORIENTED_EDGE('',*,*,#43821,.T.); +#44812 = ORIENTED_EDGE('',*,*,#44298,.T.); +#44813 = ORIENTED_EDGE('',*,*,#44281,.F.); +#44814 = PLANE('',#44815); +#44815 = AXIS2_PLACEMENT_3D('',#44816,#44817,#44818); +#44816 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#44817 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44818 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#44819 = ADVANCED_FACE('',(#44820),#44831,.F.); +#44820 = FACE_BOUND('',#44821,.F.); +#44821 = EDGE_LOOP('',(#44822,#44823,#44824,#44830)); +#44822 = ORIENTED_EDGE('',*,*,#44185,.F.); +#44823 = ORIENTED_EDGE('',*,*,#44106,.T.); +#44824 = ORIENTED_EDGE('',*,*,#44825,.T.); +#44825 = EDGE_CURVE('',#44099,#44218,#44826,.T.); +#44826 = LINE('',#44827,#44828); +#44827 = CARTESIAN_POINT('',(1.95,4.65,0.776557752994)); +#44828 = VECTOR('',#44829,1.); +#44829 = DIRECTION('',(0.,0.,1.)); +#44830 = ORIENTED_EDGE('',*,*,#44217,.F.); +#44831 = PLANE('',#44832); +#44832 = AXIS2_PLACEMENT_3D('',#44833,#44834,#44835); +#44833 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#44834 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#44835 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44836 = ADVANCED_FACE('',(#44837),#44862,.F.); +#44837 = FACE_BOUND('',#44838,.F.); +#44838 = EDGE_LOOP('',(#44839,#44847,#44848,#44856)); +#44839 = ORIENTED_EDGE('',*,*,#44840,.F.); +#44840 = EDGE_CURVE('',#44099,#44841,#44843,.T.); +#44841 = VERTEX_POINT('',#44842); +#44842 = CARTESIAN_POINT('',(2.2,4.65,0.825)); +#44843 = LINE('',#44844,#44845); +#44844 = CARTESIAN_POINT('',(1.8,4.65,0.825)); +#44845 = VECTOR('',#44846,1.); +#44846 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44847 = ORIENTED_EDGE('',*,*,#44098,.T.); +#44848 = ORIENTED_EDGE('',*,*,#44849,.T.); +#44849 = EDGE_CURVE('',#44091,#44850,#44852,.T.); +#44850 = VERTEX_POINT('',#44851); +#44851 = CARTESIAN_POINT('',(2.2,4.24,0.825)); +#44852 = LINE('',#44853,#44854); +#44853 = CARTESIAN_POINT('',(1.8,4.24,0.825)); +#44854 = VECTOR('',#44855,1.); +#44855 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44856 = ORIENTED_EDGE('',*,*,#44857,.F.); +#44857 = EDGE_CURVE('',#44841,#44850,#44858,.T.); +#44858 = LINE('',#44859,#44860); +#44859 = CARTESIAN_POINT('',(2.2,4.65,0.825)); +#44860 = VECTOR('',#44861,1.); +#44861 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44862 = PLANE('',#44863); +#44863 = AXIS2_PLACEMENT_3D('',#44864,#44865,#44866); +#44864 = CARTESIAN_POINT('',(1.8,4.65,0.825)); +#44865 = DIRECTION('',(0.,0.,1.)); +#44866 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#44867 = ADVANCED_FACE('',(#44868),#44893,.F.); +#44868 = FACE_BOUND('',#44869,.F.); +#44869 = EDGE_LOOP('',(#44870,#44878,#44879,#44887)); +#44870 = ORIENTED_EDGE('',*,*,#44871,.F.); +#44871 = EDGE_CURVE('',#44091,#44872,#44874,.T.); +#44872 = VERTEX_POINT('',#44873); +#44873 = CARTESIAN_POINT('',(1.95,4.24,1.025)); +#44874 = LINE('',#44875,#44876); +#44875 = CARTESIAN_POINT('',(1.95,4.24,0.776557752994)); +#44876 = VECTOR('',#44877,1.); +#44877 = DIRECTION('',(0.,0.,1.)); +#44878 = ORIENTED_EDGE('',*,*,#44090,.T.); +#44879 = ORIENTED_EDGE('',*,*,#44880,.T.); +#44880 = EDGE_CURVE('',#44083,#44881,#44883,.T.); +#44881 = VERTEX_POINT('',#44882); +#44882 = CARTESIAN_POINT('',(1.95,3.38,1.025)); +#44883 = LINE('',#44884,#44885); +#44884 = CARTESIAN_POINT('',(1.95,3.38,0.776557752994)); +#44885 = VECTOR('',#44886,1.); +#44886 = DIRECTION('',(0.,0.,1.)); +#44887 = ORIENTED_EDGE('',*,*,#44888,.F.); +#44888 = EDGE_CURVE('',#44872,#44881,#44889,.T.); +#44889 = LINE('',#44890,#44891); +#44890 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#44891 = VECTOR('',#44892,1.); +#44892 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44893 = PLANE('',#44894); +#44894 = AXIS2_PLACEMENT_3D('',#44895,#44896,#44897); +#44895 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#44896 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#44897 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44898 = ADVANCED_FACE('',(#44899),#44924,.F.); +#44899 = FACE_BOUND('',#44900,.F.); +#44900 = EDGE_LOOP('',(#44901,#44909,#44910,#44918)); +#44901 = ORIENTED_EDGE('',*,*,#44902,.F.); +#44902 = EDGE_CURVE('',#44083,#44903,#44905,.T.); +#44903 = VERTEX_POINT('',#44904); +#44904 = CARTESIAN_POINT('',(2.2,3.38,0.825)); +#44905 = LINE('',#44906,#44907); +#44906 = CARTESIAN_POINT('',(1.8,3.38,0.825)); +#44907 = VECTOR('',#44908,1.); +#44908 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44909 = ORIENTED_EDGE('',*,*,#44082,.T.); +#44910 = ORIENTED_EDGE('',*,*,#44911,.T.); +#44911 = EDGE_CURVE('',#44075,#44912,#44914,.T.); +#44912 = VERTEX_POINT('',#44913); +#44913 = CARTESIAN_POINT('',(2.2,2.97,0.825)); +#44914 = LINE('',#44915,#44916); +#44915 = CARTESIAN_POINT('',(1.8,2.97,0.825)); +#44916 = VECTOR('',#44917,1.); +#44917 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44918 = ORIENTED_EDGE('',*,*,#44919,.F.); +#44919 = EDGE_CURVE('',#44903,#44912,#44920,.T.); +#44920 = LINE('',#44921,#44922); +#44921 = CARTESIAN_POINT('',(2.2,3.38,0.825)); +#44922 = VECTOR('',#44923,1.); +#44923 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44924 = PLANE('',#44925); +#44925 = AXIS2_PLACEMENT_3D('',#44926,#44927,#44928); +#44926 = CARTESIAN_POINT('',(1.8,3.38,0.825)); +#44927 = DIRECTION('',(0.,0.,1.)); +#44928 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#44929 = ADVANCED_FACE('',(#44930),#44955,.F.); +#44930 = FACE_BOUND('',#44931,.F.); +#44931 = EDGE_LOOP('',(#44932,#44940,#44941,#44949)); +#44932 = ORIENTED_EDGE('',*,*,#44933,.F.); +#44933 = EDGE_CURVE('',#44075,#44934,#44936,.T.); +#44934 = VERTEX_POINT('',#44935); +#44935 = CARTESIAN_POINT('',(1.95,2.97,1.025)); +#44936 = LINE('',#44937,#44938); +#44937 = CARTESIAN_POINT('',(1.95,2.97,0.776557752994)); +#44938 = VECTOR('',#44939,1.); +#44939 = DIRECTION('',(0.,0.,1.)); +#44940 = ORIENTED_EDGE('',*,*,#44074,.T.); +#44941 = ORIENTED_EDGE('',*,*,#44942,.T.); +#44942 = EDGE_CURVE('',#44067,#44943,#44945,.T.); +#44943 = VERTEX_POINT('',#44944); +#44944 = CARTESIAN_POINT('',(1.95,2.11,1.025)); +#44945 = LINE('',#44946,#44947); +#44946 = CARTESIAN_POINT('',(1.95,2.11,0.776557752994)); +#44947 = VECTOR('',#44948,1.); +#44948 = DIRECTION('',(0.,0.,1.)); +#44949 = ORIENTED_EDGE('',*,*,#44950,.F.); +#44950 = EDGE_CURVE('',#44934,#44943,#44951,.T.); +#44951 = LINE('',#44952,#44953); +#44952 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#44953 = VECTOR('',#44954,1.); +#44954 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44955 = PLANE('',#44956); +#44956 = AXIS2_PLACEMENT_3D('',#44957,#44958,#44959); +#44957 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#44958 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#44959 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44960 = ADVANCED_FACE('',(#44961),#44986,.F.); +#44961 = FACE_BOUND('',#44962,.F.); +#44962 = EDGE_LOOP('',(#44963,#44971,#44972,#44980)); +#44963 = ORIENTED_EDGE('',*,*,#44964,.F.); +#44964 = EDGE_CURVE('',#44067,#44965,#44967,.T.); +#44965 = VERTEX_POINT('',#44966); +#44966 = CARTESIAN_POINT('',(2.2,2.11,0.825)); +#44967 = LINE('',#44968,#44969); +#44968 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#44969 = VECTOR('',#44970,1.); +#44970 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44971 = ORIENTED_EDGE('',*,*,#44066,.T.); +#44972 = ORIENTED_EDGE('',*,*,#44973,.T.); +#44973 = EDGE_CURVE('',#44059,#44974,#44976,.T.); +#44974 = VERTEX_POINT('',#44975); +#44975 = CARTESIAN_POINT('',(2.2,1.7,0.825)); +#44976 = LINE('',#44977,#44978); +#44977 = CARTESIAN_POINT('',(1.8,1.7,0.825)); +#44978 = VECTOR('',#44979,1.); +#44979 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#44980 = ORIENTED_EDGE('',*,*,#44981,.F.); +#44981 = EDGE_CURVE('',#44965,#44974,#44982,.T.); +#44982 = LINE('',#44983,#44984); +#44983 = CARTESIAN_POINT('',(2.2,2.11,0.825)); +#44984 = VECTOR('',#44985,1.); +#44985 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#44986 = PLANE('',#44987); +#44987 = AXIS2_PLACEMENT_3D('',#44988,#44989,#44990); +#44988 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#44989 = DIRECTION('',(0.,0.,1.)); +#44990 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#44991 = ADVANCED_FACE('',(#44992),#45017,.F.); +#44992 = FACE_BOUND('',#44993,.F.); +#44993 = EDGE_LOOP('',(#44994,#45002,#45003,#45011)); +#44994 = ORIENTED_EDGE('',*,*,#44995,.F.); +#44995 = EDGE_CURVE('',#44059,#44996,#44998,.T.); +#44996 = VERTEX_POINT('',#44997); +#44997 = CARTESIAN_POINT('',(1.95,1.7,1.025)); +#44998 = LINE('',#44999,#45000); +#44999 = CARTESIAN_POINT('',(1.95,1.7,0.776557752994)); +#45000 = VECTOR('',#45001,1.); +#45001 = DIRECTION('',(0.,0.,1.)); +#45002 = ORIENTED_EDGE('',*,*,#44058,.T.); +#45003 = ORIENTED_EDGE('',*,*,#45004,.T.); +#45004 = EDGE_CURVE('',#44051,#45005,#45007,.T.); +#45005 = VERTEX_POINT('',#45006); +#45006 = CARTESIAN_POINT('',(1.95,0.84,1.025)); +#45007 = LINE('',#45008,#45009); +#45008 = CARTESIAN_POINT('',(1.95,0.84,0.776557752994)); +#45009 = VECTOR('',#45010,1.); +#45010 = DIRECTION('',(0.,0.,1.)); +#45011 = ORIENTED_EDGE('',*,*,#45012,.F.); +#45012 = EDGE_CURVE('',#44996,#45005,#45013,.T.); +#45013 = LINE('',#45014,#45015); +#45014 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45015 = VECTOR('',#45016,1.); +#45016 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45017 = PLANE('',#45018); +#45018 = AXIS2_PLACEMENT_3D('',#45019,#45020,#45021); +#45019 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45020 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45021 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45022 = ADVANCED_FACE('',(#45023),#45048,.F.); +#45023 = FACE_BOUND('',#45024,.F.); +#45024 = EDGE_LOOP('',(#45025,#45033,#45034,#45042)); +#45025 = ORIENTED_EDGE('',*,*,#45026,.F.); +#45026 = EDGE_CURVE('',#44051,#45027,#45029,.T.); +#45027 = VERTEX_POINT('',#45028); +#45028 = CARTESIAN_POINT('',(2.2,0.84,0.825)); +#45029 = LINE('',#45030,#45031); +#45030 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#45031 = VECTOR('',#45032,1.); +#45032 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45033 = ORIENTED_EDGE('',*,*,#44050,.T.); +#45034 = ORIENTED_EDGE('',*,*,#45035,.T.); +#45035 = EDGE_CURVE('',#44043,#45036,#45038,.T.); +#45036 = VERTEX_POINT('',#45037); +#45037 = CARTESIAN_POINT('',(2.2,0.43,0.825)); +#45038 = LINE('',#45039,#45040); +#45039 = CARTESIAN_POINT('',(1.8,0.43,0.825)); +#45040 = VECTOR('',#45041,1.); +#45041 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45042 = ORIENTED_EDGE('',*,*,#45043,.F.); +#45043 = EDGE_CURVE('',#45027,#45036,#45044,.T.); +#45044 = LINE('',#45045,#45046); +#45045 = CARTESIAN_POINT('',(2.2,0.84,0.825)); +#45046 = VECTOR('',#45047,1.); +#45047 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45048 = PLANE('',#45049); +#45049 = AXIS2_PLACEMENT_3D('',#45050,#45051,#45052); +#45050 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#45051 = DIRECTION('',(0.,0.,1.)); +#45052 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#45053 = ADVANCED_FACE('',(#45054),#45079,.F.); +#45054 = FACE_BOUND('',#45055,.F.); +#45055 = EDGE_LOOP('',(#45056,#45064,#45065,#45073)); +#45056 = ORIENTED_EDGE('',*,*,#45057,.F.); +#45057 = EDGE_CURVE('',#44043,#45058,#45060,.T.); +#45058 = VERTEX_POINT('',#45059); +#45059 = CARTESIAN_POINT('',(1.95,0.43,1.025)); +#45060 = LINE('',#45061,#45062); +#45061 = CARTESIAN_POINT('',(1.95,0.43,0.776557752994)); +#45062 = VECTOR('',#45063,1.); +#45063 = DIRECTION('',(0.,0.,1.)); +#45064 = ORIENTED_EDGE('',*,*,#44042,.T.); +#45065 = ORIENTED_EDGE('',*,*,#45066,.T.); +#45066 = EDGE_CURVE('',#44035,#45067,#45069,.T.); +#45067 = VERTEX_POINT('',#45068); +#45068 = CARTESIAN_POINT('',(1.95,-0.43,1.025)); +#45069 = LINE('',#45070,#45071); +#45070 = CARTESIAN_POINT('',(1.95,-0.43,0.776557752994)); +#45071 = VECTOR('',#45072,1.); +#45072 = DIRECTION('',(0.,0.,1.)); +#45073 = ORIENTED_EDGE('',*,*,#45074,.F.); +#45074 = EDGE_CURVE('',#45058,#45067,#45075,.T.); +#45075 = LINE('',#45076,#45077); +#45076 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45077 = VECTOR('',#45078,1.); +#45078 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45079 = PLANE('',#45080); +#45080 = AXIS2_PLACEMENT_3D('',#45081,#45082,#45083); +#45081 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45082 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45083 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45084 = ADVANCED_FACE('',(#45085),#45110,.F.); +#45085 = FACE_BOUND('',#45086,.F.); +#45086 = EDGE_LOOP('',(#45087,#45095,#45096,#45104)); +#45087 = ORIENTED_EDGE('',*,*,#45088,.F.); +#45088 = EDGE_CURVE('',#44035,#45089,#45091,.T.); +#45089 = VERTEX_POINT('',#45090); +#45090 = CARTESIAN_POINT('',(2.2,-0.43,0.825)); +#45091 = LINE('',#45092,#45093); +#45092 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#45093 = VECTOR('',#45094,1.); +#45094 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45095 = ORIENTED_EDGE('',*,*,#44034,.T.); +#45096 = ORIENTED_EDGE('',*,*,#45097,.T.); +#45097 = EDGE_CURVE('',#44027,#45098,#45100,.T.); +#45098 = VERTEX_POINT('',#45099); +#45099 = CARTESIAN_POINT('',(2.2,-0.84,0.825)); +#45100 = LINE('',#45101,#45102); +#45101 = CARTESIAN_POINT('',(1.8,-0.84,0.825)); +#45102 = VECTOR('',#45103,1.); +#45103 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45104 = ORIENTED_EDGE('',*,*,#45105,.F.); +#45105 = EDGE_CURVE('',#45089,#45098,#45106,.T.); +#45106 = LINE('',#45107,#45108); +#45107 = CARTESIAN_POINT('',(2.2,-0.43,0.825)); +#45108 = VECTOR('',#45109,1.); +#45109 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45110 = PLANE('',#45111); +#45111 = AXIS2_PLACEMENT_3D('',#45112,#45113,#45114); +#45112 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#45113 = DIRECTION('',(0.,0.,1.)); +#45114 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#45115 = ADVANCED_FACE('',(#45116),#45141,.F.); +#45116 = FACE_BOUND('',#45117,.F.); +#45117 = EDGE_LOOP('',(#45118,#45126,#45127,#45135)); +#45118 = ORIENTED_EDGE('',*,*,#45119,.F.); +#45119 = EDGE_CURVE('',#44027,#45120,#45122,.T.); +#45120 = VERTEX_POINT('',#45121); +#45121 = CARTESIAN_POINT('',(1.95,-0.84,1.025)); +#45122 = LINE('',#45123,#45124); +#45123 = CARTESIAN_POINT('',(1.95,-0.84,0.776557752994)); +#45124 = VECTOR('',#45125,1.); +#45125 = DIRECTION('',(0.,0.,1.)); +#45126 = ORIENTED_EDGE('',*,*,#44026,.T.); +#45127 = ORIENTED_EDGE('',*,*,#45128,.T.); +#45128 = EDGE_CURVE('',#44019,#45129,#45131,.T.); +#45129 = VERTEX_POINT('',#45130); +#45130 = CARTESIAN_POINT('',(1.95,-1.7,1.025)); +#45131 = LINE('',#45132,#45133); +#45132 = CARTESIAN_POINT('',(1.95,-1.7,0.776557752994)); +#45133 = VECTOR('',#45134,1.); +#45134 = DIRECTION('',(0.,0.,1.)); +#45135 = ORIENTED_EDGE('',*,*,#45136,.F.); +#45136 = EDGE_CURVE('',#45120,#45129,#45137,.T.); +#45137 = LINE('',#45138,#45139); +#45138 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45139 = VECTOR('',#45140,1.); +#45140 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45141 = PLANE('',#45142); +#45142 = AXIS2_PLACEMENT_3D('',#45143,#45144,#45145); +#45143 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45144 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45145 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45146 = ADVANCED_FACE('',(#45147),#45172,.F.); +#45147 = FACE_BOUND('',#45148,.F.); +#45148 = EDGE_LOOP('',(#45149,#45157,#45158,#45166)); +#45149 = ORIENTED_EDGE('',*,*,#45150,.F.); +#45150 = EDGE_CURVE('',#44019,#45151,#45153,.T.); +#45151 = VERTEX_POINT('',#45152); +#45152 = CARTESIAN_POINT('',(2.2,-1.7,0.825)); +#45153 = LINE('',#45154,#45155); +#45154 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#45155 = VECTOR('',#45156,1.); +#45156 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45157 = ORIENTED_EDGE('',*,*,#44018,.T.); +#45158 = ORIENTED_EDGE('',*,*,#45159,.T.); +#45159 = EDGE_CURVE('',#44011,#45160,#45162,.T.); +#45160 = VERTEX_POINT('',#45161); +#45161 = CARTESIAN_POINT('',(2.2,-2.11,0.825)); +#45162 = LINE('',#45163,#45164); +#45163 = CARTESIAN_POINT('',(1.8,-2.11,0.825)); +#45164 = VECTOR('',#45165,1.); +#45165 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45166 = ORIENTED_EDGE('',*,*,#45167,.F.); +#45167 = EDGE_CURVE('',#45151,#45160,#45168,.T.); +#45168 = LINE('',#45169,#45170); +#45169 = CARTESIAN_POINT('',(2.2,-1.7,0.825)); +#45170 = VECTOR('',#45171,1.); +#45171 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45172 = PLANE('',#45173); +#45173 = AXIS2_PLACEMENT_3D('',#45174,#45175,#45176); +#45174 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#45175 = DIRECTION('',(0.,0.,1.)); +#45176 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#45177 = ADVANCED_FACE('',(#45178),#45203,.F.); +#45178 = FACE_BOUND('',#45179,.F.); +#45179 = EDGE_LOOP('',(#45180,#45188,#45189,#45197)); +#45180 = ORIENTED_EDGE('',*,*,#45181,.F.); +#45181 = EDGE_CURVE('',#44011,#45182,#45184,.T.); +#45182 = VERTEX_POINT('',#45183); +#45183 = CARTESIAN_POINT('',(1.95,-2.11,1.025)); +#45184 = LINE('',#45185,#45186); +#45185 = CARTESIAN_POINT('',(1.95,-2.11,0.776557752994)); +#45186 = VECTOR('',#45187,1.); +#45187 = DIRECTION('',(0.,0.,1.)); +#45188 = ORIENTED_EDGE('',*,*,#44010,.T.); +#45189 = ORIENTED_EDGE('',*,*,#45190,.T.); +#45190 = EDGE_CURVE('',#44003,#45191,#45193,.T.); +#45191 = VERTEX_POINT('',#45192); +#45192 = CARTESIAN_POINT('',(1.95,-2.97,1.025)); +#45193 = LINE('',#45194,#45195); +#45194 = CARTESIAN_POINT('',(1.95,-2.97,0.776557752994)); +#45195 = VECTOR('',#45196,1.); +#45196 = DIRECTION('',(0.,0.,1.)); +#45197 = ORIENTED_EDGE('',*,*,#45198,.F.); +#45198 = EDGE_CURVE('',#45182,#45191,#45199,.T.); +#45199 = LINE('',#45200,#45201); +#45200 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45201 = VECTOR('',#45202,1.); +#45202 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45203 = PLANE('',#45204); +#45204 = AXIS2_PLACEMENT_3D('',#45205,#45206,#45207); +#45205 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45206 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45207 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45208 = ADVANCED_FACE('',(#45209),#45234,.F.); +#45209 = FACE_BOUND('',#45210,.F.); +#45210 = EDGE_LOOP('',(#45211,#45219,#45220,#45228)); +#45211 = ORIENTED_EDGE('',*,*,#45212,.F.); +#45212 = EDGE_CURVE('',#44003,#45213,#45215,.T.); +#45213 = VERTEX_POINT('',#45214); +#45214 = CARTESIAN_POINT('',(2.2,-2.97,0.825)); +#45215 = LINE('',#45216,#45217); +#45216 = CARTESIAN_POINT('',(1.8,-2.97,0.825)); +#45217 = VECTOR('',#45218,1.); +#45218 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45219 = ORIENTED_EDGE('',*,*,#44002,.T.); +#45220 = ORIENTED_EDGE('',*,*,#45221,.T.); +#45221 = EDGE_CURVE('',#43995,#45222,#45224,.T.); +#45222 = VERTEX_POINT('',#45223); +#45223 = CARTESIAN_POINT('',(2.2,-3.38,0.825)); +#45224 = LINE('',#45225,#45226); +#45225 = CARTESIAN_POINT('',(1.8,-3.38,0.825)); +#45226 = VECTOR('',#45227,1.); +#45227 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45228 = ORIENTED_EDGE('',*,*,#45229,.F.); +#45229 = EDGE_CURVE('',#45213,#45222,#45230,.T.); +#45230 = LINE('',#45231,#45232); +#45231 = CARTESIAN_POINT('',(2.2,-2.97,0.825)); +#45232 = VECTOR('',#45233,1.); +#45233 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45234 = PLANE('',#45235); +#45235 = AXIS2_PLACEMENT_3D('',#45236,#45237,#45238); +#45236 = CARTESIAN_POINT('',(1.8,-2.97,0.825)); +#45237 = DIRECTION('',(0.,0.,1.)); +#45238 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#45239 = ADVANCED_FACE('',(#45240),#45265,.F.); +#45240 = FACE_BOUND('',#45241,.F.); +#45241 = EDGE_LOOP('',(#45242,#45250,#45251,#45259)); +#45242 = ORIENTED_EDGE('',*,*,#45243,.F.); +#45243 = EDGE_CURVE('',#43995,#45244,#45246,.T.); +#45244 = VERTEX_POINT('',#45245); +#45245 = CARTESIAN_POINT('',(1.95,-3.38,1.025)); +#45246 = LINE('',#45247,#45248); +#45247 = CARTESIAN_POINT('',(1.95,-3.38,0.776557752994)); +#45248 = VECTOR('',#45249,1.); +#45249 = DIRECTION('',(0.,0.,1.)); +#45250 = ORIENTED_EDGE('',*,*,#43994,.T.); +#45251 = ORIENTED_EDGE('',*,*,#45252,.T.); +#45252 = EDGE_CURVE('',#43987,#45253,#45255,.T.); +#45253 = VERTEX_POINT('',#45254); +#45254 = CARTESIAN_POINT('',(1.95,-4.24,1.025)); +#45255 = LINE('',#45256,#45257); +#45256 = CARTESIAN_POINT('',(1.95,-4.24,0.776557752994)); +#45257 = VECTOR('',#45258,1.); +#45258 = DIRECTION('',(0.,0.,1.)); +#45259 = ORIENTED_EDGE('',*,*,#45260,.F.); +#45260 = EDGE_CURVE('',#45244,#45253,#45261,.T.); +#45261 = LINE('',#45262,#45263); +#45262 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45263 = VECTOR('',#45264,1.); +#45264 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45265 = PLANE('',#45266); +#45266 = AXIS2_PLACEMENT_3D('',#45267,#45268,#45269); +#45267 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45268 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45269 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45270 = ADVANCED_FACE('',(#45271),#45296,.F.); +#45271 = FACE_BOUND('',#45272,.F.); +#45272 = EDGE_LOOP('',(#45273,#45281,#45282,#45290)); +#45273 = ORIENTED_EDGE('',*,*,#45274,.F.); +#45274 = EDGE_CURVE('',#43987,#45275,#45277,.T.); +#45275 = VERTEX_POINT('',#45276); +#45276 = CARTESIAN_POINT('',(2.2,-4.24,0.825)); +#45277 = LINE('',#45278,#45279); +#45278 = CARTESIAN_POINT('',(1.8,-4.24,0.825)); +#45279 = VECTOR('',#45280,1.); +#45280 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45281 = ORIENTED_EDGE('',*,*,#43986,.T.); +#45282 = ORIENTED_EDGE('',*,*,#45283,.T.); +#45283 = EDGE_CURVE('',#43979,#45284,#45286,.T.); +#45284 = VERTEX_POINT('',#45285); +#45285 = CARTESIAN_POINT('',(2.2,-4.65,0.825)); +#45286 = LINE('',#45287,#45288); +#45287 = CARTESIAN_POINT('',(1.8,-4.65,0.825)); +#45288 = VECTOR('',#45289,1.); +#45289 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45290 = ORIENTED_EDGE('',*,*,#45291,.F.); +#45291 = EDGE_CURVE('',#45275,#45284,#45292,.T.); +#45292 = LINE('',#45293,#45294); +#45293 = CARTESIAN_POINT('',(2.2,-4.24,0.825)); +#45294 = VECTOR('',#45295,1.); +#45295 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45296 = PLANE('',#45297); +#45297 = AXIS2_PLACEMENT_3D('',#45298,#45299,#45300); +#45298 = CARTESIAN_POINT('',(1.8,-4.24,0.825)); +#45299 = DIRECTION('',(0.,0.,1.)); +#45300 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#45301 = ADVANCED_FACE('',(#45302),#45326,.F.); +#45302 = FACE_BOUND('',#45303,.F.); +#45303 = EDGE_LOOP('',(#45304,#45312,#45313,#45320)); +#45304 = ORIENTED_EDGE('',*,*,#45305,.F.); +#45305 = EDGE_CURVE('',#43979,#45306,#45308,.T.); +#45306 = VERTEX_POINT('',#45307); +#45307 = CARTESIAN_POINT('',(1.95,-4.65,1.025)); +#45308 = LINE('',#45309,#45310); +#45309 = CARTESIAN_POINT('',(1.95,-4.65,0.776557752994)); +#45310 = VECTOR('',#45311,1.); +#45311 = DIRECTION('',(0.,0.,1.)); +#45312 = ORIENTED_EDGE('',*,*,#43978,.T.); +#45313 = ORIENTED_EDGE('',*,*,#45314,.T.); +#45314 = EDGE_CURVE('',#43972,#45315,#45317,.T.); +#45315 = VERTEX_POINT('',#45316); +#45316 = CARTESIAN_POINT('',(1.95,-4.775,1.025)); +#45317 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45318,#45319),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45318 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#45319 = CARTESIAN_POINT('',(1.95,-4.775,1.025)); +#45320 = ORIENTED_EDGE('',*,*,#45321,.F.); +#45321 = EDGE_CURVE('',#45306,#45315,#45322,.T.); +#45322 = LINE('',#45323,#45324); +#45323 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45324 = VECTOR('',#45325,1.); +#45325 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45326 = PLANE('',#45327); +#45327 = AXIS2_PLACEMENT_3D('',#45328,#45329,#45330); +#45328 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45329 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45330 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45331 = ADVANCED_FACE('',(#45332),#45349,.F.); +#45332 = FACE_BOUND('',#45333,.F.); +#45333 = EDGE_LOOP('',(#45334,#45335,#45336,#45344)); +#45334 = ORIENTED_EDGE('',*,*,#44123,.T.); +#45335 = ORIENTED_EDGE('',*,*,#44311,.T.); +#45336 = ORIENTED_EDGE('',*,*,#45337,.F.); +#45337 = EDGE_CURVE('',#45338,#44312,#45340,.T.); +#45338 = VERTEX_POINT('',#45339); +#45339 = CARTESIAN_POINT('',(-1.775,-4.95,1.025)); +#45340 = LINE('',#45341,#45342); +#45341 = CARTESIAN_POINT('',(-1.775,-4.95,1.025)); +#45342 = VECTOR('',#45343,1.); +#45343 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#45344 = ORIENTED_EDGE('',*,*,#45345,.F.); +#45345 = EDGE_CURVE('',#44124,#45338,#45346,.T.); +#45346 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45347,#45348),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45347 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#45348 = CARTESIAN_POINT('',(-1.775,-4.95,1.025)); +#45349 = PLANE('',#45350); +#45350 = AXIS2_PLACEMENT_3D('',#45351,#45352,#45353); +#45351 = CARTESIAN_POINT('',(-1.775,-4.95,1.025)); +#45352 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#45353 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#45354 = ADVANCED_FACE('',(#45355),#45372,.F.); +#45355 = FACE_BOUND('',#45356,.F.); +#45356 = EDGE_LOOP('',(#45357,#45358,#45365,#45371)); +#45357 = ORIENTED_EDGE('',*,*,#44152,.T.); +#45358 = ORIENTED_EDGE('',*,*,#45359,.T.); +#45359 = EDGE_CURVE('',#44146,#45360,#45362,.T.); +#45360 = VERTEX_POINT('',#45361); +#45361 = CARTESIAN_POINT('',(1.775,-4.95,1.025)); +#45362 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45363,#45364),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45363 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#45364 = CARTESIAN_POINT('',(1.775,-4.95,1.025)); +#45365 = ORIENTED_EDGE('',*,*,#45366,.F.); +#45366 = EDGE_CURVE('',#45315,#45360,#45367,.T.); +#45367 = LINE('',#45368,#45369); +#45368 = CARTESIAN_POINT('',(1.95,-4.775,1.025)); +#45369 = VECTOR('',#45370,1.); +#45370 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#45371 = ORIENTED_EDGE('',*,*,#45314,.F.); +#45372 = PLANE('',#45373); +#45373 = AXIS2_PLACEMENT_3D('',#45374,#45375,#45376); +#45374 = CARTESIAN_POINT('',(1.95,-4.775,1.025)); +#45375 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#45376 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#45377 = ADVANCED_FACE('',(#45378),#45389,.F.); +#45378 = FACE_BOUND('',#45379,.F.); +#45379 = EDGE_LOOP('',(#45380,#45381,#45382,#45388)); +#45380 = ORIENTED_EDGE('',*,*,#44169,.T.); +#45381 = ORIENTED_EDGE('',*,*,#45345,.T.); +#45382 = ORIENTED_EDGE('',*,*,#45383,.F.); +#45383 = EDGE_CURVE('',#45360,#45338,#45384,.T.); +#45384 = LINE('',#45385,#45386); +#45385 = CARTESIAN_POINT('',(1.775,-4.95,1.025)); +#45386 = VECTOR('',#45387,1.); +#45387 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45388 = ORIENTED_EDGE('',*,*,#45359,.F.); +#45389 = PLANE('',#45390); +#45390 = AXIS2_PLACEMENT_3D('',#45391,#45392,#45393); +#45391 = CARTESIAN_POINT('',(1.775,-4.95,1.025)); +#45392 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45393 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45394 = ADVANCED_FACE('',(#45395),#45434,.F.); +#45395 = FACE_BOUND('',#45396,.F.); +#45396 = EDGE_LOOP('',(#45397,#45405,#45413,#45419,#45420,#45428)); +#45397 = ORIENTED_EDGE('',*,*,#45398,.F.); +#45398 = EDGE_CURVE('',#45399,#44754,#45401,.T.); +#45399 = VERTEX_POINT('',#45400); +#45400 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#45401 = LINE('',#45402,#45403); +#45402 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#45403 = VECTOR('',#45404,1.); +#45404 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#45405 = ORIENTED_EDGE('',*,*,#45406,.T.); +#45406 = EDGE_CURVE('',#45399,#45407,#45409,.T.); +#45407 = VERTEX_POINT('',#45408); +#45408 = CARTESIAN_POINT('',(-2.2,4.65,1.025)); +#45409 = LINE('',#45410,#45411); +#45410 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#45411 = VECTOR('',#45412,1.); +#45412 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#45413 = ORIENTED_EDGE('',*,*,#45414,.T.); +#45414 = EDGE_CURVE('',#45407,#44274,#45415,.T.); +#45415 = LINE('',#45416,#45417); +#45416 = CARTESIAN_POINT('',(-2.2,4.65,1.025)); +#45417 = VECTOR('',#45418,1.); +#45418 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#45419 = ORIENTED_EDGE('',*,*,#44273,.T.); +#45420 = ORIENTED_EDGE('',*,*,#45421,.F.); +#45421 = EDGE_CURVE('',#45422,#44266,#45424,.T.); +#45422 = VERTEX_POINT('',#45423); +#45423 = CARTESIAN_POINT('',(-1.875,4.24,1.025)); +#45424 = LINE('',#45425,#45426); +#45425 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45426 = VECTOR('',#45427,1.); +#45427 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45428 = ORIENTED_EDGE('',*,*,#45429,.F.); +#45429 = EDGE_CURVE('',#44754,#45422,#45430,.T.); +#45430 = LINE('',#45431,#45432); +#45431 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#45432 = VECTOR('',#45433,1.); +#45433 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#45434 = PLANE('',#45435); +#45435 = AXIS2_PLACEMENT_3D('',#45436,#45437,#45438); +#45436 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#45437 = DIRECTION('',(0.,0.,-1.)); +#45438 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#45439 = ADVANCED_FACE('',(#45440),#45584,.F.); +#45440 = FACE_BOUND('',#45441,.F.); +#45441 = EDGE_LOOP('',(#45442,#45452,#45460,#45468,#45476,#45484,#45492, + #45500,#45508,#45516,#45524,#45532,#45540,#45548,#45556,#45562, + #45563,#45564,#45571,#45579)); +#45442 = ORIENTED_EDGE('',*,*,#45443,.T.); +#45443 = EDGE_CURVE('',#45444,#45446,#45448,.T.); +#45444 = VERTEX_POINT('',#45445); +#45445 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45446 = VERTEX_POINT('',#45447); +#45447 = CARTESIAN_POINT('',(-1.875,-4.65,1.025)); +#45448 = LINE('',#45449,#45450); +#45449 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45450 = VECTOR('',#45451,1.); +#45451 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45452 = ORIENTED_EDGE('',*,*,#45453,.T.); +#45453 = EDGE_CURVE('',#45446,#45454,#45456,.T.); +#45454 = VERTEX_POINT('',#45455); +#45455 = CARTESIAN_POINT('',(-1.875,-4.24,1.025)); +#45456 = LINE('',#45457,#45458); +#45457 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45458 = VECTOR('',#45459,1.); +#45459 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45460 = ORIENTED_EDGE('',*,*,#45461,.T.); +#45461 = EDGE_CURVE('',#45454,#45462,#45464,.T.); +#45462 = VERTEX_POINT('',#45463); +#45463 = CARTESIAN_POINT('',(-1.875,-3.38,1.025)); +#45464 = LINE('',#45465,#45466); +#45465 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45466 = VECTOR('',#45467,1.); +#45467 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45468 = ORIENTED_EDGE('',*,*,#45469,.T.); +#45469 = EDGE_CURVE('',#45462,#45470,#45472,.T.); +#45470 = VERTEX_POINT('',#45471); +#45471 = CARTESIAN_POINT('',(-1.875,-2.97,1.025)); +#45472 = LINE('',#45473,#45474); +#45473 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45474 = VECTOR('',#45475,1.); +#45475 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45476 = ORIENTED_EDGE('',*,*,#45477,.T.); +#45477 = EDGE_CURVE('',#45470,#45478,#45480,.T.); +#45478 = VERTEX_POINT('',#45479); +#45479 = CARTESIAN_POINT('',(-1.875,-2.11,1.025)); +#45480 = LINE('',#45481,#45482); +#45481 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45482 = VECTOR('',#45483,1.); +#45483 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45484 = ORIENTED_EDGE('',*,*,#45485,.T.); +#45485 = EDGE_CURVE('',#45478,#45486,#45488,.T.); +#45486 = VERTEX_POINT('',#45487); +#45487 = CARTESIAN_POINT('',(-1.875,-1.7,1.025)); +#45488 = LINE('',#45489,#45490); +#45489 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45490 = VECTOR('',#45491,1.); +#45491 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45492 = ORIENTED_EDGE('',*,*,#45493,.T.); +#45493 = EDGE_CURVE('',#45486,#45494,#45496,.T.); +#45494 = VERTEX_POINT('',#45495); +#45495 = CARTESIAN_POINT('',(-1.875,-0.84,1.025)); +#45496 = LINE('',#45497,#45498); +#45497 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45498 = VECTOR('',#45499,1.); +#45499 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45500 = ORIENTED_EDGE('',*,*,#45501,.T.); +#45501 = EDGE_CURVE('',#45494,#45502,#45504,.T.); +#45502 = VERTEX_POINT('',#45503); +#45503 = CARTESIAN_POINT('',(-1.875,-0.43,1.025)); +#45504 = LINE('',#45505,#45506); +#45505 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45506 = VECTOR('',#45507,1.); +#45507 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45508 = ORIENTED_EDGE('',*,*,#45509,.T.); +#45509 = EDGE_CURVE('',#45502,#45510,#45512,.T.); +#45510 = VERTEX_POINT('',#45511); +#45511 = CARTESIAN_POINT('',(-1.875,0.43,1.025)); +#45512 = LINE('',#45513,#45514); +#45513 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45514 = VECTOR('',#45515,1.); +#45515 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45516 = ORIENTED_EDGE('',*,*,#45517,.T.); +#45517 = EDGE_CURVE('',#45510,#45518,#45520,.T.); +#45518 = VERTEX_POINT('',#45519); +#45519 = CARTESIAN_POINT('',(-1.875,0.84,1.025)); +#45520 = LINE('',#45521,#45522); +#45521 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45522 = VECTOR('',#45523,1.); +#45523 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45524 = ORIENTED_EDGE('',*,*,#45525,.T.); +#45525 = EDGE_CURVE('',#45518,#45526,#45528,.T.); +#45526 = VERTEX_POINT('',#45527); +#45527 = CARTESIAN_POINT('',(-1.875,1.7,1.025)); +#45528 = LINE('',#45529,#45530); +#45529 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45530 = VECTOR('',#45531,1.); +#45531 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45532 = ORIENTED_EDGE('',*,*,#45533,.T.); +#45533 = EDGE_CURVE('',#45526,#45534,#45536,.T.); +#45534 = VERTEX_POINT('',#45535); +#45535 = CARTESIAN_POINT('',(-1.875,2.11,1.025)); +#45536 = LINE('',#45537,#45538); +#45537 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45538 = VECTOR('',#45539,1.); +#45539 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45540 = ORIENTED_EDGE('',*,*,#45541,.T.); +#45541 = EDGE_CURVE('',#45534,#45542,#45544,.T.); +#45542 = VERTEX_POINT('',#45543); +#45543 = CARTESIAN_POINT('',(-1.875,2.97,1.025)); +#45544 = LINE('',#45545,#45546); +#45545 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45546 = VECTOR('',#45547,1.); +#45547 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45548 = ORIENTED_EDGE('',*,*,#45549,.T.); +#45549 = EDGE_CURVE('',#45542,#45550,#45552,.T.); +#45550 = VERTEX_POINT('',#45551); +#45551 = CARTESIAN_POINT('',(-1.875,3.38,1.025)); +#45552 = LINE('',#45553,#45554); +#45553 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45554 = VECTOR('',#45555,1.); +#45555 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45556 = ORIENTED_EDGE('',*,*,#45557,.T.); +#45557 = EDGE_CURVE('',#45550,#45422,#45558,.T.); +#45558 = LINE('',#45559,#45560); +#45559 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45560 = VECTOR('',#45561,1.); +#45561 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45562 = ORIENTED_EDGE('',*,*,#45421,.T.); +#45563 = ORIENTED_EDGE('',*,*,#44265,.T.); +#45564 = ORIENTED_EDGE('',*,*,#45565,.T.); +#45565 = EDGE_CURVE('',#44258,#45566,#45568,.T.); +#45566 = VERTEX_POINT('',#45567); +#45567 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#45568 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45569,#45570),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45569 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#45570 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#45571 = ORIENTED_EDGE('',*,*,#45572,.F.); +#45572 = EDGE_CURVE('',#45573,#45566,#45575,.T.); +#45573 = VERTEX_POINT('',#45574); +#45574 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#45575 = LINE('',#45576,#45577); +#45576 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#45577 = VECTOR('',#45578,1.); +#45578 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45579 = ORIENTED_EDGE('',*,*,#45580,.F.); +#45580 = EDGE_CURVE('',#45444,#45573,#45581,.T.); +#45581 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45582,#45583),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45582 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45583 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#45584 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45585,#45586) + ,(#45587,#45588 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#45585 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#45586 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#45587 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#45588 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#45589 = ADVANCED_FACE('',(#45590),#45607,.F.); +#45590 = FACE_BOUND('',#45591,.F.); +#45591 = EDGE_LOOP('',(#45592,#45593,#45600,#45606)); +#45592 = ORIENTED_EDGE('',*,*,#44257,.T.); +#45593 = ORIENTED_EDGE('',*,*,#45594,.T.); +#45594 = EDGE_CURVE('',#44250,#45595,#45597,.T.); +#45595 = VERTEX_POINT('',#45596); +#45596 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#45597 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45598,#45599),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45598 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#45599 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#45600 = ORIENTED_EDGE('',*,*,#45601,.F.); +#45601 = EDGE_CURVE('',#45566,#45595,#45602,.T.); +#45602 = LINE('',#45603,#45604); +#45603 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#45604 = VECTOR('',#45605,1.); +#45605 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#45606 = ORIENTED_EDGE('',*,*,#45565,.F.); +#45607 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45608,#45609) + ,(#45610,#45611 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#45608 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#45609 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#45610 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#45611 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#45612 = ADVANCED_FACE('',(#45613),#45630,.F.); +#45613 = FACE_BOUND('',#45614,.F.); +#45614 = EDGE_LOOP('',(#45615,#45616,#45623,#45629)); +#45615 = ORIENTED_EDGE('',*,*,#44249,.T.); +#45616 = ORIENTED_EDGE('',*,*,#45617,.T.); +#45617 = EDGE_CURVE('',#44242,#45618,#45620,.T.); +#45618 = VERTEX_POINT('',#45619); +#45619 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#45620 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45621,#45622),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45621 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#45622 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#45623 = ORIENTED_EDGE('',*,*,#45624,.F.); +#45624 = EDGE_CURVE('',#45595,#45618,#45625,.T.); +#45625 = LINE('',#45626,#45627); +#45626 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#45627 = VECTOR('',#45628,1.); +#45628 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45629 = ORIENTED_EDGE('',*,*,#45594,.F.); +#45630 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45631,#45632) + ,(#45633,#45634 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#45631 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#45632 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#45633 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#45634 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#45635 = ADVANCED_FACE('',(#45636),#45653,.F.); +#45636 = FACE_BOUND('',#45637,.F.); +#45637 = EDGE_LOOP('',(#45638,#45639,#45646,#45652)); +#45638 = ORIENTED_EDGE('',*,*,#44241,.T.); +#45639 = ORIENTED_EDGE('',*,*,#45640,.T.); +#45640 = EDGE_CURVE('',#44234,#45641,#45643,.T.); +#45641 = VERTEX_POINT('',#45642); +#45642 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#45643 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45644,#45645),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45644 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45645 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#45646 = ORIENTED_EDGE('',*,*,#45647,.F.); +#45647 = EDGE_CURVE('',#45618,#45641,#45648,.T.); +#45648 = LINE('',#45649,#45650); +#45649 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#45650 = VECTOR('',#45651,1.); +#45651 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#45652 = ORIENTED_EDGE('',*,*,#45617,.F.); +#45653 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45654,#45655) + ,(#45656,#45657 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#45654 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#45655 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#45656 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45657 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#45658 = ADVANCED_FACE('',(#45659),#45804,.F.); +#45659 = FACE_BOUND('',#45660,.F.); +#45660 = EDGE_LOOP('',(#45661,#45662,#45670,#45678,#45686,#45694,#45702, + #45710,#45718,#45726,#45734,#45742,#45750,#45758,#45766,#45774, + #45782,#45790,#45797,#45803)); +#45661 = ORIENTED_EDGE('',*,*,#44233,.T.); +#45662 = ORIENTED_EDGE('',*,*,#45663,.T.); +#45663 = EDGE_CURVE('',#44226,#45664,#45666,.T.); +#45664 = VERTEX_POINT('',#45665); +#45665 = CARTESIAN_POINT('',(1.875,4.24,1.025)); +#45666 = LINE('',#45667,#45668); +#45667 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45668 = VECTOR('',#45669,1.); +#45669 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45670 = ORIENTED_EDGE('',*,*,#45671,.T.); +#45671 = EDGE_CURVE('',#45664,#45672,#45674,.T.); +#45672 = VERTEX_POINT('',#45673); +#45673 = CARTESIAN_POINT('',(1.875,3.38,1.025)); +#45674 = LINE('',#45675,#45676); +#45675 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45676 = VECTOR('',#45677,1.); +#45677 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45678 = ORIENTED_EDGE('',*,*,#45679,.T.); +#45679 = EDGE_CURVE('',#45672,#45680,#45682,.T.); +#45680 = VERTEX_POINT('',#45681); +#45681 = CARTESIAN_POINT('',(1.875,2.97,1.025)); +#45682 = LINE('',#45683,#45684); +#45683 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45684 = VECTOR('',#45685,1.); +#45685 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45686 = ORIENTED_EDGE('',*,*,#45687,.T.); +#45687 = EDGE_CURVE('',#45680,#45688,#45690,.T.); +#45688 = VERTEX_POINT('',#45689); +#45689 = CARTESIAN_POINT('',(1.875,2.11,1.025)); +#45690 = LINE('',#45691,#45692); +#45691 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45692 = VECTOR('',#45693,1.); +#45693 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45694 = ORIENTED_EDGE('',*,*,#45695,.T.); +#45695 = EDGE_CURVE('',#45688,#45696,#45698,.T.); +#45696 = VERTEX_POINT('',#45697); +#45697 = CARTESIAN_POINT('',(1.875,1.7,1.025)); +#45698 = LINE('',#45699,#45700); +#45699 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45700 = VECTOR('',#45701,1.); +#45701 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45702 = ORIENTED_EDGE('',*,*,#45703,.T.); +#45703 = EDGE_CURVE('',#45696,#45704,#45706,.T.); +#45704 = VERTEX_POINT('',#45705); +#45705 = CARTESIAN_POINT('',(1.875,0.84,1.025)); +#45706 = LINE('',#45707,#45708); +#45707 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45708 = VECTOR('',#45709,1.); +#45709 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45710 = ORIENTED_EDGE('',*,*,#45711,.T.); +#45711 = EDGE_CURVE('',#45704,#45712,#45714,.T.); +#45712 = VERTEX_POINT('',#45713); +#45713 = CARTESIAN_POINT('',(1.875,0.43,1.025)); +#45714 = LINE('',#45715,#45716); +#45715 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45716 = VECTOR('',#45717,1.); +#45717 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45718 = ORIENTED_EDGE('',*,*,#45719,.T.); +#45719 = EDGE_CURVE('',#45712,#45720,#45722,.T.); +#45720 = VERTEX_POINT('',#45721); +#45721 = CARTESIAN_POINT('',(1.875,-0.43,1.025)); +#45722 = LINE('',#45723,#45724); +#45723 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45724 = VECTOR('',#45725,1.); +#45725 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45726 = ORIENTED_EDGE('',*,*,#45727,.T.); +#45727 = EDGE_CURVE('',#45720,#45728,#45730,.T.); +#45728 = VERTEX_POINT('',#45729); +#45729 = CARTESIAN_POINT('',(1.875,-0.84,1.025)); +#45730 = LINE('',#45731,#45732); +#45731 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45732 = VECTOR('',#45733,1.); +#45733 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45734 = ORIENTED_EDGE('',*,*,#45735,.T.); +#45735 = EDGE_CURVE('',#45728,#45736,#45738,.T.); +#45736 = VERTEX_POINT('',#45737); +#45737 = CARTESIAN_POINT('',(1.875,-1.7,1.025)); +#45738 = LINE('',#45739,#45740); +#45739 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45740 = VECTOR('',#45741,1.); +#45741 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45742 = ORIENTED_EDGE('',*,*,#45743,.T.); +#45743 = EDGE_CURVE('',#45736,#45744,#45746,.T.); +#45744 = VERTEX_POINT('',#45745); +#45745 = CARTESIAN_POINT('',(1.875,-2.11,1.025)); +#45746 = LINE('',#45747,#45748); +#45747 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45748 = VECTOR('',#45749,1.); +#45749 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45750 = ORIENTED_EDGE('',*,*,#45751,.T.); +#45751 = EDGE_CURVE('',#45744,#45752,#45754,.T.); +#45752 = VERTEX_POINT('',#45753); +#45753 = CARTESIAN_POINT('',(1.875,-2.97,1.025)); +#45754 = LINE('',#45755,#45756); +#45755 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45756 = VECTOR('',#45757,1.); +#45757 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45758 = ORIENTED_EDGE('',*,*,#45759,.T.); +#45759 = EDGE_CURVE('',#45752,#45760,#45762,.T.); +#45760 = VERTEX_POINT('',#45761); +#45761 = CARTESIAN_POINT('',(1.875,-3.38,1.025)); +#45762 = LINE('',#45763,#45764); +#45763 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45764 = VECTOR('',#45765,1.); +#45765 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45766 = ORIENTED_EDGE('',*,*,#45767,.T.); +#45767 = EDGE_CURVE('',#45760,#45768,#45770,.T.); +#45768 = VERTEX_POINT('',#45769); +#45769 = CARTESIAN_POINT('',(1.875,-4.24,1.025)); +#45770 = LINE('',#45771,#45772); +#45771 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45772 = VECTOR('',#45773,1.); +#45773 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45774 = ORIENTED_EDGE('',*,*,#45775,.T.); +#45775 = EDGE_CURVE('',#45768,#45776,#45778,.T.); +#45776 = VERTEX_POINT('',#45777); +#45777 = CARTESIAN_POINT('',(1.875,-4.65,1.025)); +#45778 = LINE('',#45779,#45780); +#45779 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45780 = VECTOR('',#45781,1.); +#45781 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45782 = ORIENTED_EDGE('',*,*,#45783,.T.); +#45783 = EDGE_CURVE('',#45776,#45784,#45786,.T.); +#45784 = VERTEX_POINT('',#45785); +#45785 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#45786 = LINE('',#45787,#45788); +#45787 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45788 = VECTOR('',#45789,1.); +#45789 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45790 = ORIENTED_EDGE('',*,*,#45791,.T.); +#45791 = EDGE_CURVE('',#45784,#45792,#45794,.T.); +#45792 = VERTEX_POINT('',#45793); +#45793 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#45794 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45795,#45796),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45795 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#45796 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#45797 = ORIENTED_EDGE('',*,*,#45798,.F.); +#45798 = EDGE_CURVE('',#45641,#45792,#45799,.T.); +#45799 = LINE('',#45800,#45801); +#45800 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#45801 = VECTOR('',#45802,1.); +#45802 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45803 = ORIENTED_EDGE('',*,*,#45640,.F.); +#45804 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45805,#45806) + ,(#45807,#45808 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#45805 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45806 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#45807 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#45808 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#45809 = ADVANCED_FACE('',(#45810),#45842,.F.); +#45810 = FACE_BOUND('',#45811,.F.); +#45811 = EDGE_LOOP('',(#45812,#45820,#45828,#45834,#45840,#45841)); +#45812 = ORIENTED_EDGE('',*,*,#45813,.F.); +#45813 = EDGE_CURVE('',#45814,#44218,#45816,.T.); +#45814 = VERTEX_POINT('',#45815); +#45815 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#45816 = LINE('',#45817,#45818); +#45817 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#45818 = VECTOR('',#45819,1.); +#45819 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45820 = ORIENTED_EDGE('',*,*,#45821,.T.); +#45821 = EDGE_CURVE('',#45814,#45822,#45824,.T.); +#45822 = VERTEX_POINT('',#45823); +#45823 = CARTESIAN_POINT('',(2.2,4.24,1.025)); +#45824 = LINE('',#45825,#45826); +#45825 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#45826 = VECTOR('',#45827,1.); +#45827 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45828 = ORIENTED_EDGE('',*,*,#45829,.T.); +#45829 = EDGE_CURVE('',#45822,#44872,#45830,.T.); +#45830 = LINE('',#45831,#45832); +#45831 = CARTESIAN_POINT('',(2.2,4.24,1.025)); +#45832 = VECTOR('',#45833,1.); +#45833 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45834 = ORIENTED_EDGE('',*,*,#45835,.T.); +#45835 = EDGE_CURVE('',#44872,#45664,#45836,.T.); +#45836 = LINE('',#45837,#45838); +#45837 = CARTESIAN_POINT('',(2.2,4.24,1.025)); +#45838 = VECTOR('',#45839,1.); +#45839 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45840 = ORIENTED_EDGE('',*,*,#45663,.F.); +#45841 = ORIENTED_EDGE('',*,*,#44225,.F.); +#45842 = PLANE('',#45843); +#45843 = AXIS2_PLACEMENT_3D('',#45844,#45845,#45846); +#45844 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#45845 = DIRECTION('',(0.,0.,-1.)); +#45846 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#45847 = ADVANCED_FACE('',(#45848),#45891,.F.); +#45848 = FACE_BOUND('',#45849,.F.); +#45849 = EDGE_LOOP('',(#45850,#45851,#45857,#45858,#45866,#45874,#45880, + #45881,#45887,#45888,#45889,#45890)); +#45850 = ORIENTED_EDGE('',*,*,#44327,.T.); +#45851 = ORIENTED_EDGE('',*,*,#45852,.T.); +#45852 = EDGE_CURVE('',#44320,#45446,#45853,.T.); +#45853 = LINE('',#45854,#45855); +#45854 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#45855 = VECTOR('',#45856,1.); +#45856 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#45857 = ORIENTED_EDGE('',*,*,#45443,.F.); +#45858 = ORIENTED_EDGE('',*,*,#45859,.F.); +#45859 = EDGE_CURVE('',#45860,#45444,#45862,.T.); +#45860 = VERTEX_POINT('',#45861); +#45861 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#45862 = LINE('',#45863,#45864); +#45863 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#45864 = VECTOR('',#45865,1.); +#45865 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#45866 = ORIENTED_EDGE('',*,*,#45867,.F.); +#45867 = EDGE_CURVE('',#45868,#45860,#45870,.T.); +#45868 = VERTEX_POINT('',#45869); +#45869 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#45870 = LINE('',#45871,#45872); +#45871 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#45872 = VECTOR('',#45873,1.); +#45873 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45874 = ORIENTED_EDGE('',*,*,#45875,.F.); +#45875 = EDGE_CURVE('',#45784,#45868,#45876,.T.); +#45876 = LINE('',#45877,#45878); +#45877 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#45878 = VECTOR('',#45879,1.); +#45879 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#45880 = ORIENTED_EDGE('',*,*,#45783,.F.); +#45881 = ORIENTED_EDGE('',*,*,#45882,.F.); +#45882 = EDGE_CURVE('',#45306,#45776,#45883,.T.); +#45883 = LINE('',#45884,#45885); +#45884 = CARTESIAN_POINT('',(2.2,-4.65,1.025)); +#45885 = VECTOR('',#45886,1.); +#45886 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45887 = ORIENTED_EDGE('',*,*,#45321,.T.); +#45888 = ORIENTED_EDGE('',*,*,#45366,.T.); +#45889 = ORIENTED_EDGE('',*,*,#45383,.T.); +#45890 = ORIENTED_EDGE('',*,*,#45337,.T.); +#45891 = PLANE('',#45892); +#45892 = AXIS2_PLACEMENT_3D('',#45893,#45894,#45895); +#45893 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#45894 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#45895 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#45896 = ADVANCED_FACE('',(#45897),#45983,.F.); +#45897 = FACE_BOUND('',#45898,.F.); +#45898 = EDGE_LOOP('',(#45899,#45900,#45901,#45910,#45918,#45927,#45935, + #45943,#45951,#45960,#45968,#45977)); +#45899 = ORIENTED_EDGE('',*,*,#44319,.F.); +#45900 = ORIENTED_EDGE('',*,*,#44341,.T.); +#45901 = ORIENTED_EDGE('',*,*,#45902,.T.); +#45902 = EDGE_CURVE('',#44342,#45903,#45905,.T.); +#45903 = VERTEX_POINT('',#45904); +#45904 = CARTESIAN_POINT('',(-2.298480775301,-4.65,0.742364817767)); +#45905 = CIRCLE('',#45906,0.1); +#45906 = AXIS2_PLACEMENT_3D('',#45907,#45908,#45909); +#45907 = CARTESIAN_POINT('',(-2.2,-4.65,0.725)); +#45908 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#45909 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#45910 = ORIENTED_EDGE('',*,*,#45911,.T.); +#45911 = EDGE_CURVE('',#45903,#45912,#45914,.T.); +#45912 = VERTEX_POINT('',#45913); +#45913 = CARTESIAN_POINT('',(-2.379496640897,-4.65,0.2479055467)); +#45914 = LINE('',#45915,#45916); +#45915 = CARTESIAN_POINT('',(-2.298480775301,-4.65,0.742364817767)); +#45916 = VECTOR('',#45917,1.); +#45917 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#45918 = ORIENTED_EDGE('',*,*,#45919,.T.); +#45919 = EDGE_CURVE('',#45912,#45920,#45922,.T.); +#45920 = VERTEX_POINT('',#45921); +#45921 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.)); +#45922 = CIRCLE('',#45923,0.3); +#45923 = AXIS2_PLACEMENT_3D('',#45924,#45925,#45926); +#45924 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.3)); +#45925 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#45926 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#45927 = ORIENTED_EDGE('',*,*,#45928,.T.); +#45928 = EDGE_CURVE('',#45920,#45929,#45931,.T.); +#45929 = VERTEX_POINT('',#45930); +#45930 = CARTESIAN_POINT('',(-3.,-4.65,0.)); +#45931 = LINE('',#45932,#45933); +#45932 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.)); +#45933 = VECTOR('',#45934,1.); +#45934 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#45935 = ORIENTED_EDGE('',*,*,#45936,.T.); +#45936 = EDGE_CURVE('',#45929,#45937,#45939,.T.); +#45937 = VERTEX_POINT('',#45938); +#45938 = CARTESIAN_POINT('',(-3.,-4.65,0.2)); +#45939 = LINE('',#45940,#45941); +#45940 = CARTESIAN_POINT('',(-3.,-4.65,0.)); +#45941 = VECTOR('',#45942,1.); +#45942 = DIRECTION('',(0.,0.,1.)); +#45943 = ORIENTED_EDGE('',*,*,#45944,.T.); +#45944 = EDGE_CURVE('',#45937,#45945,#45947,.T.); +#45945 = VERTEX_POINT('',#45946); +#45946 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.2)); +#45947 = LINE('',#45948,#45949); +#45948 = CARTESIAN_POINT('',(-3.,-4.65,0.2)); +#45949 = VECTOR('',#45950,1.); +#45950 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#45951 = ORIENTED_EDGE('',*,*,#45952,.T.); +#45952 = EDGE_CURVE('',#45945,#45953,#45955,.T.); +#45953 = VERTEX_POINT('',#45954); +#45954 = CARTESIAN_POINT('',(-2.5764581915,-4.65,0.282635182233)); +#45955 = CIRCLE('',#45956,0.1); +#45956 = AXIS2_PLACEMENT_3D('',#45957,#45958,#45959); +#45957 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.3)); +#45958 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#45959 = DIRECTION('',(0.,0.,-1.)); +#45960 = ORIENTED_EDGE('',*,*,#45961,.T.); +#45961 = EDGE_CURVE('',#45953,#45962,#45964,.T.); +#45962 = VERTEX_POINT('',#45963); +#45963 = CARTESIAN_POINT('',(-2.495442325904,-4.65,0.7770944533)); +#45964 = LINE('',#45965,#45966); +#45965 = CARTESIAN_POINT('',(-2.5764581915,-4.65,0.282635182233)); +#45966 = VECTOR('',#45967,1.); +#45967 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#45968 = ORIENTED_EDGE('',*,*,#45969,.T.); +#45969 = EDGE_CURVE('',#45962,#45970,#45972,.T.); +#45970 = VERTEX_POINT('',#45971); +#45971 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#45972 = CIRCLE('',#45973,0.3); +#45973 = AXIS2_PLACEMENT_3D('',#45974,#45975,#45976); +#45974 = CARTESIAN_POINT('',(-2.2,-4.65,0.725)); +#45975 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#45976 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#45977 = ORIENTED_EDGE('',*,*,#45978,.T.); +#45978 = EDGE_CURVE('',#45970,#44320,#45979,.T.); +#45979 = LINE('',#45980,#45981); +#45980 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#45981 = VECTOR('',#45982,1.); +#45982 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#45983 = PLANE('',#45984); +#45984 = AXIS2_PLACEMENT_3D('',#45985,#45986,#45987); +#45985 = CARTESIAN_POINT('',(-2.410970442936,-4.65,0.528115505988)); +#45986 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#45987 = DIRECTION('',(0.,-0.,1.)); +#45988 = ADVANCED_FACE('',(#45989),#46008,.F.); +#45989 = FACE_BOUND('',#45990,.F.); +#45990 = EDGE_LOOP('',(#45991,#45992,#46001,#46007)); +#45991 = ORIENTED_EDGE('',*,*,#44358,.T.); +#45992 = ORIENTED_EDGE('',*,*,#45993,.T.); +#45993 = EDGE_CURVE('',#44351,#45994,#45996,.T.); +#45994 = VERTEX_POINT('',#45995); +#45995 = CARTESIAN_POINT('',(-2.298480775301,-4.24,0.742364817767)); +#45996 = CIRCLE('',#45997,0.1); +#45997 = AXIS2_PLACEMENT_3D('',#45998,#45999,#46000); +#45998 = CARTESIAN_POINT('',(-2.2,-4.24,0.725)); +#45999 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46000 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46001 = ORIENTED_EDGE('',*,*,#46002,.F.); +#46002 = EDGE_CURVE('',#45903,#45994,#46003,.T.); +#46003 = LINE('',#46004,#46005); +#46004 = CARTESIAN_POINT('',(-2.298480775301,-4.65,0.742364817767)); +#46005 = VECTOR('',#46006,1.); +#46006 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46007 = ORIENTED_EDGE('',*,*,#45902,.F.); +#46008 = CYLINDRICAL_SURFACE('',#46009,0.1); +#46009 = AXIS2_PLACEMENT_3D('',#46010,#46011,#46012); +#46010 = CARTESIAN_POINT('',(-2.2,-4.65,0.725)); +#46011 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#46012 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46013 = ADVANCED_FACE('',(#46014),#46092,.T.); +#46014 = FACE_BOUND('',#46015,.T.); +#46015 = EDGE_LOOP('',(#46016,#46017,#46018,#46019,#46027,#46036,#46044, + #46052,#46060,#46069,#46077,#46086)); +#46016 = ORIENTED_EDGE('',*,*,#44372,.F.); +#46017 = ORIENTED_EDGE('',*,*,#44350,.T.); +#46018 = ORIENTED_EDGE('',*,*,#45993,.T.); +#46019 = ORIENTED_EDGE('',*,*,#46020,.T.); +#46020 = EDGE_CURVE('',#45994,#46021,#46023,.T.); +#46021 = VERTEX_POINT('',#46022); +#46022 = CARTESIAN_POINT('',(-2.379496640897,-4.24,0.2479055467)); +#46023 = LINE('',#46024,#46025); +#46024 = CARTESIAN_POINT('',(-2.298480775301,-4.24,0.742364817767)); +#46025 = VECTOR('',#46026,1.); +#46026 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46027 = ORIENTED_EDGE('',*,*,#46028,.T.); +#46028 = EDGE_CURVE('',#46021,#46029,#46031,.T.); +#46029 = VERTEX_POINT('',#46030); +#46030 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.)); +#46031 = CIRCLE('',#46032,0.3); +#46032 = AXIS2_PLACEMENT_3D('',#46033,#46034,#46035); +#46033 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.3)); +#46034 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46035 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46036 = ORIENTED_EDGE('',*,*,#46037,.T.); +#46037 = EDGE_CURVE('',#46029,#46038,#46040,.T.); +#46038 = VERTEX_POINT('',#46039); +#46039 = CARTESIAN_POINT('',(-3.,-4.24,0.)); +#46040 = LINE('',#46041,#46042); +#46041 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.)); +#46042 = VECTOR('',#46043,1.); +#46043 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46044 = ORIENTED_EDGE('',*,*,#46045,.T.); +#46045 = EDGE_CURVE('',#46038,#46046,#46048,.T.); +#46046 = VERTEX_POINT('',#46047); +#46047 = CARTESIAN_POINT('',(-3.,-4.24,0.2)); +#46048 = LINE('',#46049,#46050); +#46049 = CARTESIAN_POINT('',(-3.,-4.24,0.)); +#46050 = VECTOR('',#46051,1.); +#46051 = DIRECTION('',(0.,0.,1.)); +#46052 = ORIENTED_EDGE('',*,*,#46053,.T.); +#46053 = EDGE_CURVE('',#46046,#46054,#46056,.T.); +#46054 = VERTEX_POINT('',#46055); +#46055 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.2)); +#46056 = LINE('',#46057,#46058); +#46057 = CARTESIAN_POINT('',(-3.,-4.24,0.2)); +#46058 = VECTOR('',#46059,1.); +#46059 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46060 = ORIENTED_EDGE('',*,*,#46061,.T.); +#46061 = EDGE_CURVE('',#46054,#46062,#46064,.T.); +#46062 = VERTEX_POINT('',#46063); +#46063 = CARTESIAN_POINT('',(-2.5764581915,-4.24,0.282635182233)); +#46064 = CIRCLE('',#46065,0.1); +#46065 = AXIS2_PLACEMENT_3D('',#46066,#46067,#46068); +#46066 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.3)); +#46067 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46068 = DIRECTION('',(0.,0.,-1.)); +#46069 = ORIENTED_EDGE('',*,*,#46070,.T.); +#46070 = EDGE_CURVE('',#46062,#46071,#46073,.T.); +#46071 = VERTEX_POINT('',#46072); +#46072 = CARTESIAN_POINT('',(-2.495442325904,-4.24,0.7770944533)); +#46073 = LINE('',#46074,#46075); +#46074 = CARTESIAN_POINT('',(-2.5764581915,-4.24,0.282635182233)); +#46075 = VECTOR('',#46076,1.); +#46076 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46077 = ORIENTED_EDGE('',*,*,#46078,.T.); +#46078 = EDGE_CURVE('',#46071,#46079,#46081,.T.); +#46079 = VERTEX_POINT('',#46080); +#46080 = CARTESIAN_POINT('',(-2.2,-4.24,1.025)); +#46081 = CIRCLE('',#46082,0.3); +#46082 = AXIS2_PLACEMENT_3D('',#46083,#46084,#46085); +#46083 = CARTESIAN_POINT('',(-2.2,-4.24,0.725)); +#46084 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46085 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46086 = ORIENTED_EDGE('',*,*,#46087,.T.); +#46087 = EDGE_CURVE('',#46079,#44373,#46088,.T.); +#46088 = LINE('',#46089,#46090); +#46089 = CARTESIAN_POINT('',(-2.2,-4.24,1.025)); +#46090 = VECTOR('',#46091,1.); +#46091 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46092 = PLANE('',#46093); +#46093 = AXIS2_PLACEMENT_3D('',#46094,#46095,#46096); +#46094 = CARTESIAN_POINT('',(-2.410970442936,-4.24,0.528115505988)); +#46095 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46096 = DIRECTION('',(0.,-0.,1.)); +#46097 = ADVANCED_FACE('',(#46098),#46114,.F.); +#46098 = FACE_BOUND('',#46099,.F.); +#46099 = EDGE_LOOP('',(#46100,#46101,#46107,#46108)); +#46100 = ORIENTED_EDGE('',*,*,#44389,.T.); +#46101 = ORIENTED_EDGE('',*,*,#46102,.T.); +#46102 = EDGE_CURVE('',#44382,#45462,#46103,.T.); +#46103 = LINE('',#46104,#46105); +#46104 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#46105 = VECTOR('',#46106,1.); +#46106 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46107 = ORIENTED_EDGE('',*,*,#45461,.F.); +#46108 = ORIENTED_EDGE('',*,*,#46109,.F.); +#46109 = EDGE_CURVE('',#44373,#45454,#46110,.T.); +#46110 = LINE('',#46111,#46112); +#46111 = CARTESIAN_POINT('',(-2.2,-4.24,1.025)); +#46112 = VECTOR('',#46113,1.); +#46113 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46114 = PLANE('',#46115); +#46115 = AXIS2_PLACEMENT_3D('',#46116,#46117,#46118); +#46116 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#46117 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#46118 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#46119 = ADVANCED_FACE('',(#46120),#46206,.F.); +#46120 = FACE_BOUND('',#46121,.F.); +#46121 = EDGE_LOOP('',(#46122,#46123,#46124,#46133,#46141,#46150,#46158, + #46166,#46174,#46183,#46191,#46200)); +#46122 = ORIENTED_EDGE('',*,*,#44381,.F.); +#46123 = ORIENTED_EDGE('',*,*,#44403,.T.); +#46124 = ORIENTED_EDGE('',*,*,#46125,.T.); +#46125 = EDGE_CURVE('',#44404,#46126,#46128,.T.); +#46126 = VERTEX_POINT('',#46127); +#46127 = CARTESIAN_POINT('',(-2.298480775301,-3.38,0.742364817767)); +#46128 = CIRCLE('',#46129,0.1); +#46129 = AXIS2_PLACEMENT_3D('',#46130,#46131,#46132); +#46130 = CARTESIAN_POINT('',(-2.2,-3.38,0.725)); +#46131 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46132 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46133 = ORIENTED_EDGE('',*,*,#46134,.T.); +#46134 = EDGE_CURVE('',#46126,#46135,#46137,.T.); +#46135 = VERTEX_POINT('',#46136); +#46136 = CARTESIAN_POINT('',(-2.379496640897,-3.38,0.2479055467)); +#46137 = LINE('',#46138,#46139); +#46138 = CARTESIAN_POINT('',(-2.298480775301,-3.38,0.742364817767)); +#46139 = VECTOR('',#46140,1.); +#46140 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46141 = ORIENTED_EDGE('',*,*,#46142,.T.); +#46142 = EDGE_CURVE('',#46135,#46143,#46145,.T.); +#46143 = VERTEX_POINT('',#46144); +#46144 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.)); +#46145 = CIRCLE('',#46146,0.3); +#46146 = AXIS2_PLACEMENT_3D('',#46147,#46148,#46149); +#46147 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.3)); +#46148 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46149 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46150 = ORIENTED_EDGE('',*,*,#46151,.T.); +#46151 = EDGE_CURVE('',#46143,#46152,#46154,.T.); +#46152 = VERTEX_POINT('',#46153); +#46153 = CARTESIAN_POINT('',(-3.,-3.38,0.)); +#46154 = LINE('',#46155,#46156); +#46155 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.)); +#46156 = VECTOR('',#46157,1.); +#46157 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46158 = ORIENTED_EDGE('',*,*,#46159,.T.); +#46159 = EDGE_CURVE('',#46152,#46160,#46162,.T.); +#46160 = VERTEX_POINT('',#46161); +#46161 = CARTESIAN_POINT('',(-3.,-3.38,0.2)); +#46162 = LINE('',#46163,#46164); +#46163 = CARTESIAN_POINT('',(-3.,-3.38,0.)); +#46164 = VECTOR('',#46165,1.); +#46165 = DIRECTION('',(0.,0.,1.)); +#46166 = ORIENTED_EDGE('',*,*,#46167,.T.); +#46167 = EDGE_CURVE('',#46160,#46168,#46170,.T.); +#46168 = VERTEX_POINT('',#46169); +#46169 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.2)); +#46170 = LINE('',#46171,#46172); +#46171 = CARTESIAN_POINT('',(-3.,-3.38,0.2)); +#46172 = VECTOR('',#46173,1.); +#46173 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46174 = ORIENTED_EDGE('',*,*,#46175,.T.); +#46175 = EDGE_CURVE('',#46168,#46176,#46178,.T.); +#46176 = VERTEX_POINT('',#46177); +#46177 = CARTESIAN_POINT('',(-2.5764581915,-3.38,0.282635182233)); +#46178 = CIRCLE('',#46179,0.1); +#46179 = AXIS2_PLACEMENT_3D('',#46180,#46181,#46182); +#46180 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.3)); +#46181 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46182 = DIRECTION('',(0.,0.,-1.)); +#46183 = ORIENTED_EDGE('',*,*,#46184,.T.); +#46184 = EDGE_CURVE('',#46176,#46185,#46187,.T.); +#46185 = VERTEX_POINT('',#46186); +#46186 = CARTESIAN_POINT('',(-2.495442325904,-3.38,0.7770944533)); +#46187 = LINE('',#46188,#46189); +#46188 = CARTESIAN_POINT('',(-2.5764581915,-3.38,0.282635182233)); +#46189 = VECTOR('',#46190,1.); +#46190 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46191 = ORIENTED_EDGE('',*,*,#46192,.T.); +#46192 = EDGE_CURVE('',#46185,#46193,#46195,.T.); +#46193 = VERTEX_POINT('',#46194); +#46194 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#46195 = CIRCLE('',#46196,0.3); +#46196 = AXIS2_PLACEMENT_3D('',#46197,#46198,#46199); +#46197 = CARTESIAN_POINT('',(-2.2,-3.38,0.725)); +#46198 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46199 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46200 = ORIENTED_EDGE('',*,*,#46201,.T.); +#46201 = EDGE_CURVE('',#46193,#44382,#46202,.T.); +#46202 = LINE('',#46203,#46204); +#46203 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#46204 = VECTOR('',#46205,1.); +#46205 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46206 = PLANE('',#46207); +#46207 = AXIS2_PLACEMENT_3D('',#46208,#46209,#46210); +#46208 = CARTESIAN_POINT('',(-2.410970442936,-3.38,0.528115505988)); +#46209 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46210 = DIRECTION('',(0.,-0.,1.)); +#46211 = ADVANCED_FACE('',(#46212),#46231,.F.); +#46212 = FACE_BOUND('',#46213,.F.); +#46213 = EDGE_LOOP('',(#46214,#46215,#46224,#46230)); +#46214 = ORIENTED_EDGE('',*,*,#44420,.T.); +#46215 = ORIENTED_EDGE('',*,*,#46216,.T.); +#46216 = EDGE_CURVE('',#44413,#46217,#46219,.T.); +#46217 = VERTEX_POINT('',#46218); +#46218 = CARTESIAN_POINT('',(-2.298480775301,-2.97,0.742364817767)); +#46219 = CIRCLE('',#46220,0.1); +#46220 = AXIS2_PLACEMENT_3D('',#46221,#46222,#46223); +#46221 = CARTESIAN_POINT('',(-2.2,-2.97,0.725)); +#46222 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46223 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46224 = ORIENTED_EDGE('',*,*,#46225,.F.); +#46225 = EDGE_CURVE('',#46126,#46217,#46226,.T.); +#46226 = LINE('',#46227,#46228); +#46227 = CARTESIAN_POINT('',(-2.298480775301,-3.38,0.742364817767)); +#46228 = VECTOR('',#46229,1.); +#46229 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46230 = ORIENTED_EDGE('',*,*,#46125,.F.); +#46231 = CYLINDRICAL_SURFACE('',#46232,0.1); +#46232 = AXIS2_PLACEMENT_3D('',#46233,#46234,#46235); +#46233 = CARTESIAN_POINT('',(-2.2,-3.38,0.725)); +#46234 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#46235 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46236 = ADVANCED_FACE('',(#46237),#46315,.T.); +#46237 = FACE_BOUND('',#46238,.T.); +#46238 = EDGE_LOOP('',(#46239,#46240,#46241,#46242,#46250,#46259,#46267, + #46275,#46283,#46292,#46300,#46309)); +#46239 = ORIENTED_EDGE('',*,*,#44434,.F.); +#46240 = ORIENTED_EDGE('',*,*,#44412,.T.); +#46241 = ORIENTED_EDGE('',*,*,#46216,.T.); +#46242 = ORIENTED_EDGE('',*,*,#46243,.T.); +#46243 = EDGE_CURVE('',#46217,#46244,#46246,.T.); +#46244 = VERTEX_POINT('',#46245); +#46245 = CARTESIAN_POINT('',(-2.379496640897,-2.97,0.2479055467)); +#46246 = LINE('',#46247,#46248); +#46247 = CARTESIAN_POINT('',(-2.298480775301,-2.97,0.742364817767)); +#46248 = VECTOR('',#46249,1.); +#46249 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46250 = ORIENTED_EDGE('',*,*,#46251,.T.); +#46251 = EDGE_CURVE('',#46244,#46252,#46254,.T.); +#46252 = VERTEX_POINT('',#46253); +#46253 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.)); +#46254 = CIRCLE('',#46255,0.3); +#46255 = AXIS2_PLACEMENT_3D('',#46256,#46257,#46258); +#46256 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.3)); +#46257 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46258 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46259 = ORIENTED_EDGE('',*,*,#46260,.T.); +#46260 = EDGE_CURVE('',#46252,#46261,#46263,.T.); +#46261 = VERTEX_POINT('',#46262); +#46262 = CARTESIAN_POINT('',(-3.,-2.97,0.)); +#46263 = LINE('',#46264,#46265); +#46264 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.)); +#46265 = VECTOR('',#46266,1.); +#46266 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46267 = ORIENTED_EDGE('',*,*,#46268,.T.); +#46268 = EDGE_CURVE('',#46261,#46269,#46271,.T.); +#46269 = VERTEX_POINT('',#46270); +#46270 = CARTESIAN_POINT('',(-3.,-2.97,0.2)); +#46271 = LINE('',#46272,#46273); +#46272 = CARTESIAN_POINT('',(-3.,-2.97,0.)); +#46273 = VECTOR('',#46274,1.); +#46274 = DIRECTION('',(0.,0.,1.)); +#46275 = ORIENTED_EDGE('',*,*,#46276,.T.); +#46276 = EDGE_CURVE('',#46269,#46277,#46279,.T.); +#46277 = VERTEX_POINT('',#46278); +#46278 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.2)); +#46279 = LINE('',#46280,#46281); +#46280 = CARTESIAN_POINT('',(-3.,-2.97,0.2)); +#46281 = VECTOR('',#46282,1.); +#46282 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46283 = ORIENTED_EDGE('',*,*,#46284,.T.); +#46284 = EDGE_CURVE('',#46277,#46285,#46287,.T.); +#46285 = VERTEX_POINT('',#46286); +#46286 = CARTESIAN_POINT('',(-2.5764581915,-2.97,0.282635182233)); +#46287 = CIRCLE('',#46288,0.1); +#46288 = AXIS2_PLACEMENT_3D('',#46289,#46290,#46291); +#46289 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.3)); +#46290 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46291 = DIRECTION('',(0.,0.,-1.)); +#46292 = ORIENTED_EDGE('',*,*,#46293,.T.); +#46293 = EDGE_CURVE('',#46285,#46294,#46296,.T.); +#46294 = VERTEX_POINT('',#46295); +#46295 = CARTESIAN_POINT('',(-2.495442325904,-2.97,0.7770944533)); +#46296 = LINE('',#46297,#46298); +#46297 = CARTESIAN_POINT('',(-2.5764581915,-2.97,0.282635182233)); +#46298 = VECTOR('',#46299,1.); +#46299 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46300 = ORIENTED_EDGE('',*,*,#46301,.T.); +#46301 = EDGE_CURVE('',#46294,#46302,#46304,.T.); +#46302 = VERTEX_POINT('',#46303); +#46303 = CARTESIAN_POINT('',(-2.2,-2.97,1.025)); +#46304 = CIRCLE('',#46305,0.3); +#46305 = AXIS2_PLACEMENT_3D('',#46306,#46307,#46308); +#46306 = CARTESIAN_POINT('',(-2.2,-2.97,0.725)); +#46307 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46308 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46309 = ORIENTED_EDGE('',*,*,#46310,.T.); +#46310 = EDGE_CURVE('',#46302,#44435,#46311,.T.); +#46311 = LINE('',#46312,#46313); +#46312 = CARTESIAN_POINT('',(-2.2,-2.97,1.025)); +#46313 = VECTOR('',#46314,1.); +#46314 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46315 = PLANE('',#46316); +#46316 = AXIS2_PLACEMENT_3D('',#46317,#46318,#46319); +#46317 = CARTESIAN_POINT('',(-2.410970442936,-2.97,0.528115505988)); +#46318 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46319 = DIRECTION('',(0.,-0.,1.)); +#46320 = ADVANCED_FACE('',(#46321),#46337,.F.); +#46321 = FACE_BOUND('',#46322,.F.); +#46322 = EDGE_LOOP('',(#46323,#46324,#46330,#46331)); +#46323 = ORIENTED_EDGE('',*,*,#44451,.T.); +#46324 = ORIENTED_EDGE('',*,*,#46325,.T.); +#46325 = EDGE_CURVE('',#44444,#45478,#46326,.T.); +#46326 = LINE('',#46327,#46328); +#46327 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#46328 = VECTOR('',#46329,1.); +#46329 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46330 = ORIENTED_EDGE('',*,*,#45477,.F.); +#46331 = ORIENTED_EDGE('',*,*,#46332,.F.); +#46332 = EDGE_CURVE('',#44435,#45470,#46333,.T.); +#46333 = LINE('',#46334,#46335); +#46334 = CARTESIAN_POINT('',(-2.2,-2.97,1.025)); +#46335 = VECTOR('',#46336,1.); +#46336 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46337 = PLANE('',#46338); +#46338 = AXIS2_PLACEMENT_3D('',#46339,#46340,#46341); +#46339 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#46340 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#46341 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#46342 = ADVANCED_FACE('',(#46343),#46429,.F.); +#46343 = FACE_BOUND('',#46344,.F.); +#46344 = EDGE_LOOP('',(#46345,#46346,#46347,#46356,#46364,#46373,#46381, + #46389,#46397,#46406,#46414,#46423)); +#46345 = ORIENTED_EDGE('',*,*,#44443,.F.); +#46346 = ORIENTED_EDGE('',*,*,#44465,.T.); +#46347 = ORIENTED_EDGE('',*,*,#46348,.T.); +#46348 = EDGE_CURVE('',#44466,#46349,#46351,.T.); +#46349 = VERTEX_POINT('',#46350); +#46350 = CARTESIAN_POINT('',(-2.298480775301,-2.11,0.742364817767)); +#46351 = CIRCLE('',#46352,0.1); +#46352 = AXIS2_PLACEMENT_3D('',#46353,#46354,#46355); +#46353 = CARTESIAN_POINT('',(-2.2,-2.11,0.725)); +#46354 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46355 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46356 = ORIENTED_EDGE('',*,*,#46357,.T.); +#46357 = EDGE_CURVE('',#46349,#46358,#46360,.T.); +#46358 = VERTEX_POINT('',#46359); +#46359 = CARTESIAN_POINT('',(-2.379496640897,-2.11,0.2479055467)); +#46360 = LINE('',#46361,#46362); +#46361 = CARTESIAN_POINT('',(-2.298480775301,-2.11,0.742364817767)); +#46362 = VECTOR('',#46363,1.); +#46363 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46364 = ORIENTED_EDGE('',*,*,#46365,.T.); +#46365 = EDGE_CURVE('',#46358,#46366,#46368,.T.); +#46366 = VERTEX_POINT('',#46367); +#46367 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.)); +#46368 = CIRCLE('',#46369,0.3); +#46369 = AXIS2_PLACEMENT_3D('',#46370,#46371,#46372); +#46370 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.3)); +#46371 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46372 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46373 = ORIENTED_EDGE('',*,*,#46374,.T.); +#46374 = EDGE_CURVE('',#46366,#46375,#46377,.T.); +#46375 = VERTEX_POINT('',#46376); +#46376 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#46377 = LINE('',#46378,#46379); +#46378 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.)); +#46379 = VECTOR('',#46380,1.); +#46380 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46381 = ORIENTED_EDGE('',*,*,#46382,.T.); +#46382 = EDGE_CURVE('',#46375,#46383,#46385,.T.); +#46383 = VERTEX_POINT('',#46384); +#46384 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#46385 = LINE('',#46386,#46387); +#46386 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#46387 = VECTOR('',#46388,1.); +#46388 = DIRECTION('',(0.,0.,1.)); +#46389 = ORIENTED_EDGE('',*,*,#46390,.T.); +#46390 = EDGE_CURVE('',#46383,#46391,#46393,.T.); +#46391 = VERTEX_POINT('',#46392); +#46392 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.2)); +#46393 = LINE('',#46394,#46395); +#46394 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#46395 = VECTOR('',#46396,1.); +#46396 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46397 = ORIENTED_EDGE('',*,*,#46398,.T.); +#46398 = EDGE_CURVE('',#46391,#46399,#46401,.T.); +#46399 = VERTEX_POINT('',#46400); +#46400 = CARTESIAN_POINT('',(-2.5764581915,-2.11,0.282635182233)); +#46401 = CIRCLE('',#46402,0.1); +#46402 = AXIS2_PLACEMENT_3D('',#46403,#46404,#46405); +#46403 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.3)); +#46404 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46405 = DIRECTION('',(0.,0.,-1.)); +#46406 = ORIENTED_EDGE('',*,*,#46407,.T.); +#46407 = EDGE_CURVE('',#46399,#46408,#46410,.T.); +#46408 = VERTEX_POINT('',#46409); +#46409 = CARTESIAN_POINT('',(-2.495442325904,-2.11,0.7770944533)); +#46410 = LINE('',#46411,#46412); +#46411 = CARTESIAN_POINT('',(-2.5764581915,-2.11,0.282635182233)); +#46412 = VECTOR('',#46413,1.); +#46413 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46414 = ORIENTED_EDGE('',*,*,#46415,.T.); +#46415 = EDGE_CURVE('',#46408,#46416,#46418,.T.); +#46416 = VERTEX_POINT('',#46417); +#46417 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#46418 = CIRCLE('',#46419,0.3); +#46419 = AXIS2_PLACEMENT_3D('',#46420,#46421,#46422); +#46420 = CARTESIAN_POINT('',(-2.2,-2.11,0.725)); +#46421 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46422 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46423 = ORIENTED_EDGE('',*,*,#46424,.T.); +#46424 = EDGE_CURVE('',#46416,#44444,#46425,.T.); +#46425 = LINE('',#46426,#46427); +#46426 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#46427 = VECTOR('',#46428,1.); +#46428 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46429 = PLANE('',#46430); +#46430 = AXIS2_PLACEMENT_3D('',#46431,#46432,#46433); +#46431 = CARTESIAN_POINT('',(-2.410970442936,-2.11,0.528115505988)); +#46432 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46433 = DIRECTION('',(0.,-0.,1.)); +#46434 = ADVANCED_FACE('',(#46435),#46454,.F.); +#46435 = FACE_BOUND('',#46436,.F.); +#46436 = EDGE_LOOP('',(#46437,#46438,#46447,#46453)); +#46437 = ORIENTED_EDGE('',*,*,#44482,.T.); +#46438 = ORIENTED_EDGE('',*,*,#46439,.T.); +#46439 = EDGE_CURVE('',#44475,#46440,#46442,.T.); +#46440 = VERTEX_POINT('',#46441); +#46441 = CARTESIAN_POINT('',(-2.298480775301,-1.7,0.742364817767)); +#46442 = CIRCLE('',#46443,0.1); +#46443 = AXIS2_PLACEMENT_3D('',#46444,#46445,#46446); +#46444 = CARTESIAN_POINT('',(-2.2,-1.7,0.725)); +#46445 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46446 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46447 = ORIENTED_EDGE('',*,*,#46448,.F.); +#46448 = EDGE_CURVE('',#46349,#46440,#46449,.T.); +#46449 = LINE('',#46450,#46451); +#46450 = CARTESIAN_POINT('',(-2.298480775301,-2.11,0.742364817767)); +#46451 = VECTOR('',#46452,1.); +#46452 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46453 = ORIENTED_EDGE('',*,*,#46348,.F.); +#46454 = CYLINDRICAL_SURFACE('',#46455,0.1); +#46455 = AXIS2_PLACEMENT_3D('',#46456,#46457,#46458); +#46456 = CARTESIAN_POINT('',(-2.2,-2.11,0.725)); +#46457 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#46458 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46459 = ADVANCED_FACE('',(#46460),#46538,.T.); +#46460 = FACE_BOUND('',#46461,.T.); +#46461 = EDGE_LOOP('',(#46462,#46463,#46464,#46465,#46473,#46482,#46490, + #46498,#46506,#46515,#46523,#46532)); +#46462 = ORIENTED_EDGE('',*,*,#44496,.F.); +#46463 = ORIENTED_EDGE('',*,*,#44474,.T.); +#46464 = ORIENTED_EDGE('',*,*,#46439,.T.); +#46465 = ORIENTED_EDGE('',*,*,#46466,.T.); +#46466 = EDGE_CURVE('',#46440,#46467,#46469,.T.); +#46467 = VERTEX_POINT('',#46468); +#46468 = CARTESIAN_POINT('',(-2.379496640897,-1.7,0.2479055467)); +#46469 = LINE('',#46470,#46471); +#46470 = CARTESIAN_POINT('',(-2.298480775301,-1.7,0.742364817767)); +#46471 = VECTOR('',#46472,1.); +#46472 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46473 = ORIENTED_EDGE('',*,*,#46474,.T.); +#46474 = EDGE_CURVE('',#46467,#46475,#46477,.T.); +#46475 = VERTEX_POINT('',#46476); +#46476 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.)); +#46477 = CIRCLE('',#46478,0.3); +#46478 = AXIS2_PLACEMENT_3D('',#46479,#46480,#46481); +#46479 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.3)); +#46480 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46481 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46482 = ORIENTED_EDGE('',*,*,#46483,.T.); +#46483 = EDGE_CURVE('',#46475,#46484,#46486,.T.); +#46484 = VERTEX_POINT('',#46485); +#46485 = CARTESIAN_POINT('',(-3.,-1.7,0.)); +#46486 = LINE('',#46487,#46488); +#46487 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.)); +#46488 = VECTOR('',#46489,1.); +#46489 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46490 = ORIENTED_EDGE('',*,*,#46491,.T.); +#46491 = EDGE_CURVE('',#46484,#46492,#46494,.T.); +#46492 = VERTEX_POINT('',#46493); +#46493 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#46494 = LINE('',#46495,#46496); +#46495 = CARTESIAN_POINT('',(-3.,-1.7,0.)); +#46496 = VECTOR('',#46497,1.); +#46497 = DIRECTION('',(0.,0.,1.)); +#46498 = ORIENTED_EDGE('',*,*,#46499,.T.); +#46499 = EDGE_CURVE('',#46492,#46500,#46502,.T.); +#46500 = VERTEX_POINT('',#46501); +#46501 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.2)); +#46502 = LINE('',#46503,#46504); +#46503 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#46504 = VECTOR('',#46505,1.); +#46505 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46506 = ORIENTED_EDGE('',*,*,#46507,.T.); +#46507 = EDGE_CURVE('',#46500,#46508,#46510,.T.); +#46508 = VERTEX_POINT('',#46509); +#46509 = CARTESIAN_POINT('',(-2.5764581915,-1.7,0.282635182233)); +#46510 = CIRCLE('',#46511,0.1); +#46511 = AXIS2_PLACEMENT_3D('',#46512,#46513,#46514); +#46512 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.3)); +#46513 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46514 = DIRECTION('',(0.,0.,-1.)); +#46515 = ORIENTED_EDGE('',*,*,#46516,.T.); +#46516 = EDGE_CURVE('',#46508,#46517,#46519,.T.); +#46517 = VERTEX_POINT('',#46518); +#46518 = CARTESIAN_POINT('',(-2.495442325904,-1.7,0.7770944533)); +#46519 = LINE('',#46520,#46521); +#46520 = CARTESIAN_POINT('',(-2.5764581915,-1.7,0.282635182233)); +#46521 = VECTOR('',#46522,1.); +#46522 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46523 = ORIENTED_EDGE('',*,*,#46524,.T.); +#46524 = EDGE_CURVE('',#46517,#46525,#46527,.T.); +#46525 = VERTEX_POINT('',#46526); +#46526 = CARTESIAN_POINT('',(-2.2,-1.7,1.025)); +#46527 = CIRCLE('',#46528,0.3); +#46528 = AXIS2_PLACEMENT_3D('',#46529,#46530,#46531); +#46529 = CARTESIAN_POINT('',(-2.2,-1.7,0.725)); +#46530 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46531 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46532 = ORIENTED_EDGE('',*,*,#46533,.T.); +#46533 = EDGE_CURVE('',#46525,#44497,#46534,.T.); +#46534 = LINE('',#46535,#46536); +#46535 = CARTESIAN_POINT('',(-2.2,-1.7,1.025)); +#46536 = VECTOR('',#46537,1.); +#46537 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46538 = PLANE('',#46539); +#46539 = AXIS2_PLACEMENT_3D('',#46540,#46541,#46542); +#46540 = CARTESIAN_POINT('',(-2.410970442936,-1.7,0.528115505988)); +#46541 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46542 = DIRECTION('',(0.,-0.,1.)); +#46543 = ADVANCED_FACE('',(#46544),#46560,.F.); +#46544 = FACE_BOUND('',#46545,.F.); +#46545 = EDGE_LOOP('',(#46546,#46547,#46553,#46554)); +#46546 = ORIENTED_EDGE('',*,*,#44513,.T.); +#46547 = ORIENTED_EDGE('',*,*,#46548,.T.); +#46548 = EDGE_CURVE('',#44506,#45494,#46549,.T.); +#46549 = LINE('',#46550,#46551); +#46550 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#46551 = VECTOR('',#46552,1.); +#46552 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46553 = ORIENTED_EDGE('',*,*,#45493,.F.); +#46554 = ORIENTED_EDGE('',*,*,#46555,.F.); +#46555 = EDGE_CURVE('',#44497,#45486,#46556,.T.); +#46556 = LINE('',#46557,#46558); +#46557 = CARTESIAN_POINT('',(-2.2,-1.7,1.025)); +#46558 = VECTOR('',#46559,1.); +#46559 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46560 = PLANE('',#46561); +#46561 = AXIS2_PLACEMENT_3D('',#46562,#46563,#46564); +#46562 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#46563 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#46564 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#46565 = ADVANCED_FACE('',(#46566),#46652,.F.); +#46566 = FACE_BOUND('',#46567,.F.); +#46567 = EDGE_LOOP('',(#46568,#46569,#46570,#46579,#46587,#46596,#46604, + #46612,#46620,#46629,#46637,#46646)); +#46568 = ORIENTED_EDGE('',*,*,#44505,.F.); +#46569 = ORIENTED_EDGE('',*,*,#44527,.T.); +#46570 = ORIENTED_EDGE('',*,*,#46571,.T.); +#46571 = EDGE_CURVE('',#44528,#46572,#46574,.T.); +#46572 = VERTEX_POINT('',#46573); +#46573 = CARTESIAN_POINT('',(-2.298480775301,-0.84,0.742364817767)); +#46574 = CIRCLE('',#46575,0.1); +#46575 = AXIS2_PLACEMENT_3D('',#46576,#46577,#46578); +#46576 = CARTESIAN_POINT('',(-2.2,-0.84,0.725)); +#46577 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46578 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46579 = ORIENTED_EDGE('',*,*,#46580,.T.); +#46580 = EDGE_CURVE('',#46572,#46581,#46583,.T.); +#46581 = VERTEX_POINT('',#46582); +#46582 = CARTESIAN_POINT('',(-2.379496640897,-0.84,0.2479055467)); +#46583 = LINE('',#46584,#46585); +#46584 = CARTESIAN_POINT('',(-2.298480775301,-0.84,0.742364817767)); +#46585 = VECTOR('',#46586,1.); +#46586 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46587 = ORIENTED_EDGE('',*,*,#46588,.T.); +#46588 = EDGE_CURVE('',#46581,#46589,#46591,.T.); +#46589 = VERTEX_POINT('',#46590); +#46590 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.)); +#46591 = CIRCLE('',#46592,0.3); +#46592 = AXIS2_PLACEMENT_3D('',#46593,#46594,#46595); +#46593 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.3)); +#46594 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46595 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46596 = ORIENTED_EDGE('',*,*,#46597,.T.); +#46597 = EDGE_CURVE('',#46589,#46598,#46600,.T.); +#46598 = VERTEX_POINT('',#46599); +#46599 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#46600 = LINE('',#46601,#46602); +#46601 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.)); +#46602 = VECTOR('',#46603,1.); +#46603 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46604 = ORIENTED_EDGE('',*,*,#46605,.T.); +#46605 = EDGE_CURVE('',#46598,#46606,#46608,.T.); +#46606 = VERTEX_POINT('',#46607); +#46607 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#46608 = LINE('',#46609,#46610); +#46609 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#46610 = VECTOR('',#46611,1.); +#46611 = DIRECTION('',(0.,0.,1.)); +#46612 = ORIENTED_EDGE('',*,*,#46613,.T.); +#46613 = EDGE_CURVE('',#46606,#46614,#46616,.T.); +#46614 = VERTEX_POINT('',#46615); +#46615 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.2)); +#46616 = LINE('',#46617,#46618); +#46617 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#46618 = VECTOR('',#46619,1.); +#46619 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46620 = ORIENTED_EDGE('',*,*,#46621,.T.); +#46621 = EDGE_CURVE('',#46614,#46622,#46624,.T.); +#46622 = VERTEX_POINT('',#46623); +#46623 = CARTESIAN_POINT('',(-2.5764581915,-0.84,0.282635182233)); +#46624 = CIRCLE('',#46625,0.1); +#46625 = AXIS2_PLACEMENT_3D('',#46626,#46627,#46628); +#46626 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.3)); +#46627 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46628 = DIRECTION('',(0.,0.,-1.)); +#46629 = ORIENTED_EDGE('',*,*,#46630,.T.); +#46630 = EDGE_CURVE('',#46622,#46631,#46633,.T.); +#46631 = VERTEX_POINT('',#46632); +#46632 = CARTESIAN_POINT('',(-2.495442325904,-0.84,0.7770944533)); +#46633 = LINE('',#46634,#46635); +#46634 = CARTESIAN_POINT('',(-2.5764581915,-0.84,0.282635182233)); +#46635 = VECTOR('',#46636,1.); +#46636 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46637 = ORIENTED_EDGE('',*,*,#46638,.T.); +#46638 = EDGE_CURVE('',#46631,#46639,#46641,.T.); +#46639 = VERTEX_POINT('',#46640); +#46640 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#46641 = CIRCLE('',#46642,0.3); +#46642 = AXIS2_PLACEMENT_3D('',#46643,#46644,#46645); +#46643 = CARTESIAN_POINT('',(-2.2,-0.84,0.725)); +#46644 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46645 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46646 = ORIENTED_EDGE('',*,*,#46647,.T.); +#46647 = EDGE_CURVE('',#46639,#44506,#46648,.T.); +#46648 = LINE('',#46649,#46650); +#46649 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#46650 = VECTOR('',#46651,1.); +#46651 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46652 = PLANE('',#46653); +#46653 = AXIS2_PLACEMENT_3D('',#46654,#46655,#46656); +#46654 = CARTESIAN_POINT('',(-2.410970442936,-0.84,0.528115505988)); +#46655 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46656 = DIRECTION('',(0.,-0.,1.)); +#46657 = ADVANCED_FACE('',(#46658),#46677,.F.); +#46658 = FACE_BOUND('',#46659,.F.); +#46659 = EDGE_LOOP('',(#46660,#46661,#46670,#46676)); +#46660 = ORIENTED_EDGE('',*,*,#44544,.T.); +#46661 = ORIENTED_EDGE('',*,*,#46662,.T.); +#46662 = EDGE_CURVE('',#44537,#46663,#46665,.T.); +#46663 = VERTEX_POINT('',#46664); +#46664 = CARTESIAN_POINT('',(-2.298480775301,-0.43,0.742364817767)); +#46665 = CIRCLE('',#46666,0.1); +#46666 = AXIS2_PLACEMENT_3D('',#46667,#46668,#46669); +#46667 = CARTESIAN_POINT('',(-2.2,-0.43,0.725)); +#46668 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46669 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46670 = ORIENTED_EDGE('',*,*,#46671,.F.); +#46671 = EDGE_CURVE('',#46572,#46663,#46672,.T.); +#46672 = LINE('',#46673,#46674); +#46673 = CARTESIAN_POINT('',(-2.298480775301,-0.84,0.742364817767)); +#46674 = VECTOR('',#46675,1.); +#46675 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46676 = ORIENTED_EDGE('',*,*,#46571,.F.); +#46677 = CYLINDRICAL_SURFACE('',#46678,0.1); +#46678 = AXIS2_PLACEMENT_3D('',#46679,#46680,#46681); +#46679 = CARTESIAN_POINT('',(-2.2,-0.84,0.725)); +#46680 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#46681 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46682 = ADVANCED_FACE('',(#46683),#46761,.T.); +#46683 = FACE_BOUND('',#46684,.T.); +#46684 = EDGE_LOOP('',(#46685,#46686,#46687,#46688,#46696,#46705,#46713, + #46721,#46729,#46738,#46746,#46755)); +#46685 = ORIENTED_EDGE('',*,*,#44558,.F.); +#46686 = ORIENTED_EDGE('',*,*,#44536,.T.); +#46687 = ORIENTED_EDGE('',*,*,#46662,.T.); +#46688 = ORIENTED_EDGE('',*,*,#46689,.T.); +#46689 = EDGE_CURVE('',#46663,#46690,#46692,.T.); +#46690 = VERTEX_POINT('',#46691); +#46691 = CARTESIAN_POINT('',(-2.379496640897,-0.43,0.2479055467)); +#46692 = LINE('',#46693,#46694); +#46693 = CARTESIAN_POINT('',(-2.298480775301,-0.43,0.742364817767)); +#46694 = VECTOR('',#46695,1.); +#46695 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46696 = ORIENTED_EDGE('',*,*,#46697,.T.); +#46697 = EDGE_CURVE('',#46690,#46698,#46700,.T.); +#46698 = VERTEX_POINT('',#46699); +#46699 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.)); +#46700 = CIRCLE('',#46701,0.3); +#46701 = AXIS2_PLACEMENT_3D('',#46702,#46703,#46704); +#46702 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.3)); +#46703 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46704 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46705 = ORIENTED_EDGE('',*,*,#46706,.T.); +#46706 = EDGE_CURVE('',#46698,#46707,#46709,.T.); +#46707 = VERTEX_POINT('',#46708); +#46708 = CARTESIAN_POINT('',(-3.,-0.43,0.)); +#46709 = LINE('',#46710,#46711); +#46710 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.)); +#46711 = VECTOR('',#46712,1.); +#46712 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46713 = ORIENTED_EDGE('',*,*,#46714,.T.); +#46714 = EDGE_CURVE('',#46707,#46715,#46717,.T.); +#46715 = VERTEX_POINT('',#46716); +#46716 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#46717 = LINE('',#46718,#46719); +#46718 = CARTESIAN_POINT('',(-3.,-0.43,0.)); +#46719 = VECTOR('',#46720,1.); +#46720 = DIRECTION('',(0.,0.,1.)); +#46721 = ORIENTED_EDGE('',*,*,#46722,.T.); +#46722 = EDGE_CURVE('',#46715,#46723,#46725,.T.); +#46723 = VERTEX_POINT('',#46724); +#46724 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.2)); +#46725 = LINE('',#46726,#46727); +#46726 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#46727 = VECTOR('',#46728,1.); +#46728 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46729 = ORIENTED_EDGE('',*,*,#46730,.T.); +#46730 = EDGE_CURVE('',#46723,#46731,#46733,.T.); +#46731 = VERTEX_POINT('',#46732); +#46732 = CARTESIAN_POINT('',(-2.5764581915,-0.43,0.282635182233)); +#46733 = CIRCLE('',#46734,0.1); +#46734 = AXIS2_PLACEMENT_3D('',#46735,#46736,#46737); +#46735 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.3)); +#46736 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46737 = DIRECTION('',(0.,0.,-1.)); +#46738 = ORIENTED_EDGE('',*,*,#46739,.T.); +#46739 = EDGE_CURVE('',#46731,#46740,#46742,.T.); +#46740 = VERTEX_POINT('',#46741); +#46741 = CARTESIAN_POINT('',(-2.495442325904,-0.43,0.7770944533)); +#46742 = LINE('',#46743,#46744); +#46743 = CARTESIAN_POINT('',(-2.5764581915,-0.43,0.282635182233)); +#46744 = VECTOR('',#46745,1.); +#46745 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46746 = ORIENTED_EDGE('',*,*,#46747,.T.); +#46747 = EDGE_CURVE('',#46740,#46748,#46750,.T.); +#46748 = VERTEX_POINT('',#46749); +#46749 = CARTESIAN_POINT('',(-2.2,-0.43,1.025)); +#46750 = CIRCLE('',#46751,0.3); +#46751 = AXIS2_PLACEMENT_3D('',#46752,#46753,#46754); +#46752 = CARTESIAN_POINT('',(-2.2,-0.43,0.725)); +#46753 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46754 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46755 = ORIENTED_EDGE('',*,*,#46756,.T.); +#46756 = EDGE_CURVE('',#46748,#44559,#46757,.T.); +#46757 = LINE('',#46758,#46759); +#46758 = CARTESIAN_POINT('',(-2.2,-0.43,1.025)); +#46759 = VECTOR('',#46760,1.); +#46760 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46761 = PLANE('',#46762); +#46762 = AXIS2_PLACEMENT_3D('',#46763,#46764,#46765); +#46763 = CARTESIAN_POINT('',(-2.410970442936,-0.43,0.528115505988)); +#46764 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46765 = DIRECTION('',(0.,-0.,1.)); +#46766 = ADVANCED_FACE('',(#46767),#46783,.F.); +#46767 = FACE_BOUND('',#46768,.F.); +#46768 = EDGE_LOOP('',(#46769,#46770,#46776,#46777)); +#46769 = ORIENTED_EDGE('',*,*,#44575,.T.); +#46770 = ORIENTED_EDGE('',*,*,#46771,.T.); +#46771 = EDGE_CURVE('',#44568,#45510,#46772,.T.); +#46772 = LINE('',#46773,#46774); +#46773 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#46774 = VECTOR('',#46775,1.); +#46775 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46776 = ORIENTED_EDGE('',*,*,#45509,.F.); +#46777 = ORIENTED_EDGE('',*,*,#46778,.F.); +#46778 = EDGE_CURVE('',#44559,#45502,#46779,.T.); +#46779 = LINE('',#46780,#46781); +#46780 = CARTESIAN_POINT('',(-2.2,-0.43,1.025)); +#46781 = VECTOR('',#46782,1.); +#46782 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46783 = PLANE('',#46784); +#46784 = AXIS2_PLACEMENT_3D('',#46785,#46786,#46787); +#46785 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#46786 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#46787 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#46788 = ADVANCED_FACE('',(#46789),#46875,.F.); +#46789 = FACE_BOUND('',#46790,.F.); +#46790 = EDGE_LOOP('',(#46791,#46792,#46793,#46802,#46810,#46819,#46827, + #46835,#46843,#46852,#46860,#46869)); +#46791 = ORIENTED_EDGE('',*,*,#44567,.F.); +#46792 = ORIENTED_EDGE('',*,*,#44589,.T.); +#46793 = ORIENTED_EDGE('',*,*,#46794,.T.); +#46794 = EDGE_CURVE('',#44590,#46795,#46797,.T.); +#46795 = VERTEX_POINT('',#46796); +#46796 = CARTESIAN_POINT('',(-2.298480775301,0.43,0.742364817767)); +#46797 = CIRCLE('',#46798,0.1); +#46798 = AXIS2_PLACEMENT_3D('',#46799,#46800,#46801); +#46799 = CARTESIAN_POINT('',(-2.2,0.43,0.725)); +#46800 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46801 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46802 = ORIENTED_EDGE('',*,*,#46803,.T.); +#46803 = EDGE_CURVE('',#46795,#46804,#46806,.T.); +#46804 = VERTEX_POINT('',#46805); +#46805 = CARTESIAN_POINT('',(-2.379496640897,0.43,0.2479055467)); +#46806 = LINE('',#46807,#46808); +#46807 = CARTESIAN_POINT('',(-2.298480775301,0.43,0.742364817767)); +#46808 = VECTOR('',#46809,1.); +#46809 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46810 = ORIENTED_EDGE('',*,*,#46811,.T.); +#46811 = EDGE_CURVE('',#46804,#46812,#46814,.T.); +#46812 = VERTEX_POINT('',#46813); +#46813 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.)); +#46814 = CIRCLE('',#46815,0.3); +#46815 = AXIS2_PLACEMENT_3D('',#46816,#46817,#46818); +#46816 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.3)); +#46817 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46818 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46819 = ORIENTED_EDGE('',*,*,#46820,.T.); +#46820 = EDGE_CURVE('',#46812,#46821,#46823,.T.); +#46821 = VERTEX_POINT('',#46822); +#46822 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#46823 = LINE('',#46824,#46825); +#46824 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.)); +#46825 = VECTOR('',#46826,1.); +#46826 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46827 = ORIENTED_EDGE('',*,*,#46828,.T.); +#46828 = EDGE_CURVE('',#46821,#46829,#46831,.T.); +#46829 = VERTEX_POINT('',#46830); +#46830 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#46831 = LINE('',#46832,#46833); +#46832 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#46833 = VECTOR('',#46834,1.); +#46834 = DIRECTION('',(0.,0.,1.)); +#46835 = ORIENTED_EDGE('',*,*,#46836,.T.); +#46836 = EDGE_CURVE('',#46829,#46837,#46839,.T.); +#46837 = VERTEX_POINT('',#46838); +#46838 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.2)); +#46839 = LINE('',#46840,#46841); +#46840 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#46841 = VECTOR('',#46842,1.); +#46842 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46843 = ORIENTED_EDGE('',*,*,#46844,.T.); +#46844 = EDGE_CURVE('',#46837,#46845,#46847,.T.); +#46845 = VERTEX_POINT('',#46846); +#46846 = CARTESIAN_POINT('',(-2.5764581915,0.43,0.282635182233)); +#46847 = CIRCLE('',#46848,0.1); +#46848 = AXIS2_PLACEMENT_3D('',#46849,#46850,#46851); +#46849 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.3)); +#46850 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46851 = DIRECTION('',(0.,0.,-1.)); +#46852 = ORIENTED_EDGE('',*,*,#46853,.T.); +#46853 = EDGE_CURVE('',#46845,#46854,#46856,.T.); +#46854 = VERTEX_POINT('',#46855); +#46855 = CARTESIAN_POINT('',(-2.495442325904,0.43,0.7770944533)); +#46856 = LINE('',#46857,#46858); +#46857 = CARTESIAN_POINT('',(-2.5764581915,0.43,0.282635182233)); +#46858 = VECTOR('',#46859,1.); +#46859 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46860 = ORIENTED_EDGE('',*,*,#46861,.T.); +#46861 = EDGE_CURVE('',#46854,#46862,#46864,.T.); +#46862 = VERTEX_POINT('',#46863); +#46863 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#46864 = CIRCLE('',#46865,0.3); +#46865 = AXIS2_PLACEMENT_3D('',#46866,#46867,#46868); +#46866 = CARTESIAN_POINT('',(-2.2,0.43,0.725)); +#46867 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46868 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46869 = ORIENTED_EDGE('',*,*,#46870,.T.); +#46870 = EDGE_CURVE('',#46862,#44568,#46871,.T.); +#46871 = LINE('',#46872,#46873); +#46872 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#46873 = VECTOR('',#46874,1.); +#46874 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46875 = PLANE('',#46876); +#46876 = AXIS2_PLACEMENT_3D('',#46877,#46878,#46879); +#46877 = CARTESIAN_POINT('',(-2.410970442936,0.43,0.528115505988)); +#46878 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46879 = DIRECTION('',(0.,-0.,1.)); +#46880 = ADVANCED_FACE('',(#46881),#46900,.F.); +#46881 = FACE_BOUND('',#46882,.F.); +#46882 = EDGE_LOOP('',(#46883,#46884,#46893,#46899)); +#46883 = ORIENTED_EDGE('',*,*,#44606,.T.); +#46884 = ORIENTED_EDGE('',*,*,#46885,.T.); +#46885 = EDGE_CURVE('',#44599,#46886,#46888,.T.); +#46886 = VERTEX_POINT('',#46887); +#46887 = CARTESIAN_POINT('',(-2.298480775301,0.84,0.742364817767)); +#46888 = CIRCLE('',#46889,0.1); +#46889 = AXIS2_PLACEMENT_3D('',#46890,#46891,#46892); +#46890 = CARTESIAN_POINT('',(-2.2,0.84,0.725)); +#46891 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#46892 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46893 = ORIENTED_EDGE('',*,*,#46894,.F.); +#46894 = EDGE_CURVE('',#46795,#46886,#46895,.T.); +#46895 = LINE('',#46896,#46897); +#46896 = CARTESIAN_POINT('',(-2.298480775301,0.43,0.742364817767)); +#46897 = VECTOR('',#46898,1.); +#46898 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46899 = ORIENTED_EDGE('',*,*,#46794,.F.); +#46900 = CYLINDRICAL_SURFACE('',#46901,0.1); +#46901 = AXIS2_PLACEMENT_3D('',#46902,#46903,#46904); +#46902 = CARTESIAN_POINT('',(-2.2,0.43,0.725)); +#46903 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#46904 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#46905 = ADVANCED_FACE('',(#46906),#46984,.T.); +#46906 = FACE_BOUND('',#46907,.T.); +#46907 = EDGE_LOOP('',(#46908,#46909,#46910,#46911,#46919,#46928,#46936, + #46944,#46952,#46961,#46969,#46978)); +#46908 = ORIENTED_EDGE('',*,*,#44620,.F.); +#46909 = ORIENTED_EDGE('',*,*,#44598,.T.); +#46910 = ORIENTED_EDGE('',*,*,#46885,.T.); +#46911 = ORIENTED_EDGE('',*,*,#46912,.T.); +#46912 = EDGE_CURVE('',#46886,#46913,#46915,.T.); +#46913 = VERTEX_POINT('',#46914); +#46914 = CARTESIAN_POINT('',(-2.379496640897,0.84,0.2479055467)); +#46915 = LINE('',#46916,#46917); +#46916 = CARTESIAN_POINT('',(-2.298480775301,0.84,0.742364817767)); +#46917 = VECTOR('',#46918,1.); +#46918 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#46919 = ORIENTED_EDGE('',*,*,#46920,.T.); +#46920 = EDGE_CURVE('',#46913,#46921,#46923,.T.); +#46921 = VERTEX_POINT('',#46922); +#46922 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.)); +#46923 = CIRCLE('',#46924,0.3); +#46924 = AXIS2_PLACEMENT_3D('',#46925,#46926,#46927); +#46925 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.3)); +#46926 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#46927 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#46928 = ORIENTED_EDGE('',*,*,#46929,.T.); +#46929 = EDGE_CURVE('',#46921,#46930,#46932,.T.); +#46930 = VERTEX_POINT('',#46931); +#46931 = CARTESIAN_POINT('',(-3.,0.84,0.)); +#46932 = LINE('',#46933,#46934); +#46933 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.)); +#46934 = VECTOR('',#46935,1.); +#46935 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46936 = ORIENTED_EDGE('',*,*,#46937,.T.); +#46937 = EDGE_CURVE('',#46930,#46938,#46940,.T.); +#46938 = VERTEX_POINT('',#46939); +#46939 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#46940 = LINE('',#46941,#46942); +#46941 = CARTESIAN_POINT('',(-3.,0.84,0.)); +#46942 = VECTOR('',#46943,1.); +#46943 = DIRECTION('',(0.,0.,1.)); +#46944 = ORIENTED_EDGE('',*,*,#46945,.T.); +#46945 = EDGE_CURVE('',#46938,#46946,#46948,.T.); +#46946 = VERTEX_POINT('',#46947); +#46947 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.2)); +#46948 = LINE('',#46949,#46950); +#46949 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#46950 = VECTOR('',#46951,1.); +#46951 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46952 = ORIENTED_EDGE('',*,*,#46953,.T.); +#46953 = EDGE_CURVE('',#46946,#46954,#46956,.T.); +#46954 = VERTEX_POINT('',#46955); +#46955 = CARTESIAN_POINT('',(-2.5764581915,0.84,0.282635182233)); +#46956 = CIRCLE('',#46957,0.1); +#46957 = AXIS2_PLACEMENT_3D('',#46958,#46959,#46960); +#46958 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.3)); +#46959 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#46960 = DIRECTION('',(0.,0.,-1.)); +#46961 = ORIENTED_EDGE('',*,*,#46962,.T.); +#46962 = EDGE_CURVE('',#46954,#46963,#46965,.T.); +#46963 = VERTEX_POINT('',#46964); +#46964 = CARTESIAN_POINT('',(-2.495442325904,0.84,0.7770944533)); +#46965 = LINE('',#46966,#46967); +#46966 = CARTESIAN_POINT('',(-2.5764581915,0.84,0.282635182233)); +#46967 = VECTOR('',#46968,1.); +#46968 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#46969 = ORIENTED_EDGE('',*,*,#46970,.T.); +#46970 = EDGE_CURVE('',#46963,#46971,#46973,.T.); +#46971 = VERTEX_POINT('',#46972); +#46972 = CARTESIAN_POINT('',(-2.2,0.84,1.025)); +#46973 = CIRCLE('',#46974,0.3); +#46974 = AXIS2_PLACEMENT_3D('',#46975,#46976,#46977); +#46975 = CARTESIAN_POINT('',(-2.2,0.84,0.725)); +#46976 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#46977 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#46978 = ORIENTED_EDGE('',*,*,#46979,.T.); +#46979 = EDGE_CURVE('',#46971,#44621,#46980,.T.); +#46980 = LINE('',#46981,#46982); +#46981 = CARTESIAN_POINT('',(-2.2,0.84,1.025)); +#46982 = VECTOR('',#46983,1.); +#46983 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46984 = PLANE('',#46985); +#46985 = AXIS2_PLACEMENT_3D('',#46986,#46987,#46988); +#46986 = CARTESIAN_POINT('',(-2.410970442936,0.84,0.528115505988)); +#46987 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46988 = DIRECTION('',(0.,-0.,1.)); +#46989 = ADVANCED_FACE('',(#46990),#47006,.F.); +#46990 = FACE_BOUND('',#46991,.F.); +#46991 = EDGE_LOOP('',(#46992,#46993,#46999,#47000)); +#46992 = ORIENTED_EDGE('',*,*,#44637,.T.); +#46993 = ORIENTED_EDGE('',*,*,#46994,.T.); +#46994 = EDGE_CURVE('',#44630,#45526,#46995,.T.); +#46995 = LINE('',#46996,#46997); +#46996 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#46997 = VECTOR('',#46998,1.); +#46998 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46999 = ORIENTED_EDGE('',*,*,#45525,.F.); +#47000 = ORIENTED_EDGE('',*,*,#47001,.F.); +#47001 = EDGE_CURVE('',#44621,#45518,#47002,.T.); +#47002 = LINE('',#47003,#47004); +#47003 = CARTESIAN_POINT('',(-2.2,0.84,1.025)); +#47004 = VECTOR('',#47005,1.); +#47005 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47006 = PLANE('',#47007); +#47007 = AXIS2_PLACEMENT_3D('',#47008,#47009,#47010); +#47008 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#47009 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#47010 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#47011 = ADVANCED_FACE('',(#47012),#47098,.F.); +#47012 = FACE_BOUND('',#47013,.F.); +#47013 = EDGE_LOOP('',(#47014,#47015,#47016,#47025,#47033,#47042,#47050, + #47058,#47066,#47075,#47083,#47092)); +#47014 = ORIENTED_EDGE('',*,*,#44629,.F.); +#47015 = ORIENTED_EDGE('',*,*,#44651,.T.); +#47016 = ORIENTED_EDGE('',*,*,#47017,.T.); +#47017 = EDGE_CURVE('',#44652,#47018,#47020,.T.); +#47018 = VERTEX_POINT('',#47019); +#47019 = CARTESIAN_POINT('',(-2.298480775301,1.7,0.742364817767)); +#47020 = CIRCLE('',#47021,0.1); +#47021 = AXIS2_PLACEMENT_3D('',#47022,#47023,#47024); +#47022 = CARTESIAN_POINT('',(-2.2,1.7,0.725)); +#47023 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47024 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47025 = ORIENTED_EDGE('',*,*,#47026,.T.); +#47026 = EDGE_CURVE('',#47018,#47027,#47029,.T.); +#47027 = VERTEX_POINT('',#47028); +#47028 = CARTESIAN_POINT('',(-2.379496640897,1.7,0.2479055467)); +#47029 = LINE('',#47030,#47031); +#47030 = CARTESIAN_POINT('',(-2.298480775301,1.7,0.742364817767)); +#47031 = VECTOR('',#47032,1.); +#47032 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47033 = ORIENTED_EDGE('',*,*,#47034,.T.); +#47034 = EDGE_CURVE('',#47027,#47035,#47037,.T.); +#47035 = VERTEX_POINT('',#47036); +#47036 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.)); +#47037 = CIRCLE('',#47038,0.3); +#47038 = AXIS2_PLACEMENT_3D('',#47039,#47040,#47041); +#47039 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.3)); +#47040 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47041 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47042 = ORIENTED_EDGE('',*,*,#47043,.T.); +#47043 = EDGE_CURVE('',#47035,#47044,#47046,.T.); +#47044 = VERTEX_POINT('',#47045); +#47045 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#47046 = LINE('',#47047,#47048); +#47047 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.)); +#47048 = VECTOR('',#47049,1.); +#47049 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47050 = ORIENTED_EDGE('',*,*,#47051,.T.); +#47051 = EDGE_CURVE('',#47044,#47052,#47054,.T.); +#47052 = VERTEX_POINT('',#47053); +#47053 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#47054 = LINE('',#47055,#47056); +#47055 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#47056 = VECTOR('',#47057,1.); +#47057 = DIRECTION('',(0.,0.,1.)); +#47058 = ORIENTED_EDGE('',*,*,#47059,.T.); +#47059 = EDGE_CURVE('',#47052,#47060,#47062,.T.); +#47060 = VERTEX_POINT('',#47061); +#47061 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.2)); +#47062 = LINE('',#47063,#47064); +#47063 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#47064 = VECTOR('',#47065,1.); +#47065 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47066 = ORIENTED_EDGE('',*,*,#47067,.T.); +#47067 = EDGE_CURVE('',#47060,#47068,#47070,.T.); +#47068 = VERTEX_POINT('',#47069); +#47069 = CARTESIAN_POINT('',(-2.5764581915,1.7,0.282635182233)); +#47070 = CIRCLE('',#47071,0.1); +#47071 = AXIS2_PLACEMENT_3D('',#47072,#47073,#47074); +#47072 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.3)); +#47073 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47074 = DIRECTION('',(0.,0.,-1.)); +#47075 = ORIENTED_EDGE('',*,*,#47076,.T.); +#47076 = EDGE_CURVE('',#47068,#47077,#47079,.T.); +#47077 = VERTEX_POINT('',#47078); +#47078 = CARTESIAN_POINT('',(-2.495442325904,1.7,0.7770944533)); +#47079 = LINE('',#47080,#47081); +#47080 = CARTESIAN_POINT('',(-2.5764581915,1.7,0.282635182233)); +#47081 = VECTOR('',#47082,1.); +#47082 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47083 = ORIENTED_EDGE('',*,*,#47084,.T.); +#47084 = EDGE_CURVE('',#47077,#47085,#47087,.T.); +#47085 = VERTEX_POINT('',#47086); +#47086 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#47087 = CIRCLE('',#47088,0.3); +#47088 = AXIS2_PLACEMENT_3D('',#47089,#47090,#47091); +#47089 = CARTESIAN_POINT('',(-2.2,1.7,0.725)); +#47090 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47091 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47092 = ORIENTED_EDGE('',*,*,#47093,.T.); +#47093 = EDGE_CURVE('',#47085,#44630,#47094,.T.); +#47094 = LINE('',#47095,#47096); +#47095 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#47096 = VECTOR('',#47097,1.); +#47097 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47098 = PLANE('',#47099); +#47099 = AXIS2_PLACEMENT_3D('',#47100,#47101,#47102); +#47100 = CARTESIAN_POINT('',(-2.410970442936,1.7,0.528115505988)); +#47101 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47102 = DIRECTION('',(0.,-0.,1.)); +#47103 = ADVANCED_FACE('',(#47104),#47123,.F.); +#47104 = FACE_BOUND('',#47105,.F.); +#47105 = EDGE_LOOP('',(#47106,#47107,#47116,#47122)); +#47106 = ORIENTED_EDGE('',*,*,#44668,.T.); +#47107 = ORIENTED_EDGE('',*,*,#47108,.T.); +#47108 = EDGE_CURVE('',#44661,#47109,#47111,.T.); +#47109 = VERTEX_POINT('',#47110); +#47110 = CARTESIAN_POINT('',(-2.298480775301,2.11,0.742364817767)); +#47111 = CIRCLE('',#47112,0.1); +#47112 = AXIS2_PLACEMENT_3D('',#47113,#47114,#47115); +#47113 = CARTESIAN_POINT('',(-2.2,2.11,0.725)); +#47114 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47115 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47116 = ORIENTED_EDGE('',*,*,#47117,.F.); +#47117 = EDGE_CURVE('',#47018,#47109,#47118,.T.); +#47118 = LINE('',#47119,#47120); +#47119 = CARTESIAN_POINT('',(-2.298480775301,1.7,0.742364817767)); +#47120 = VECTOR('',#47121,1.); +#47121 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47122 = ORIENTED_EDGE('',*,*,#47017,.F.); +#47123 = CYLINDRICAL_SURFACE('',#47124,0.1); +#47124 = AXIS2_PLACEMENT_3D('',#47125,#47126,#47127); +#47125 = CARTESIAN_POINT('',(-2.2,1.7,0.725)); +#47126 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#47127 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47128 = ADVANCED_FACE('',(#47129),#47207,.T.); +#47129 = FACE_BOUND('',#47130,.T.); +#47130 = EDGE_LOOP('',(#47131,#47132,#47133,#47134,#47142,#47151,#47159, + #47167,#47175,#47184,#47192,#47201)); +#47131 = ORIENTED_EDGE('',*,*,#44682,.F.); +#47132 = ORIENTED_EDGE('',*,*,#44660,.T.); +#47133 = ORIENTED_EDGE('',*,*,#47108,.T.); +#47134 = ORIENTED_EDGE('',*,*,#47135,.T.); +#47135 = EDGE_CURVE('',#47109,#47136,#47138,.T.); +#47136 = VERTEX_POINT('',#47137); +#47137 = CARTESIAN_POINT('',(-2.379496640897,2.11,0.2479055467)); +#47138 = LINE('',#47139,#47140); +#47139 = CARTESIAN_POINT('',(-2.298480775301,2.11,0.742364817767)); +#47140 = VECTOR('',#47141,1.); +#47141 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47142 = ORIENTED_EDGE('',*,*,#47143,.T.); +#47143 = EDGE_CURVE('',#47136,#47144,#47146,.T.); +#47144 = VERTEX_POINT('',#47145); +#47145 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.)); +#47146 = CIRCLE('',#47147,0.3); +#47147 = AXIS2_PLACEMENT_3D('',#47148,#47149,#47150); +#47148 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.3)); +#47149 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47150 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47151 = ORIENTED_EDGE('',*,*,#47152,.T.); +#47152 = EDGE_CURVE('',#47144,#47153,#47155,.T.); +#47153 = VERTEX_POINT('',#47154); +#47154 = CARTESIAN_POINT('',(-3.,2.11,0.)); +#47155 = LINE('',#47156,#47157); +#47156 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.)); +#47157 = VECTOR('',#47158,1.); +#47158 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47159 = ORIENTED_EDGE('',*,*,#47160,.T.); +#47160 = EDGE_CURVE('',#47153,#47161,#47163,.T.); +#47161 = VERTEX_POINT('',#47162); +#47162 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#47163 = LINE('',#47164,#47165); +#47164 = CARTESIAN_POINT('',(-3.,2.11,0.)); +#47165 = VECTOR('',#47166,1.); +#47166 = DIRECTION('',(0.,0.,1.)); +#47167 = ORIENTED_EDGE('',*,*,#47168,.T.); +#47168 = EDGE_CURVE('',#47161,#47169,#47171,.T.); +#47169 = VERTEX_POINT('',#47170); +#47170 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.2)); +#47171 = LINE('',#47172,#47173); +#47172 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#47173 = VECTOR('',#47174,1.); +#47174 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47175 = ORIENTED_EDGE('',*,*,#47176,.T.); +#47176 = EDGE_CURVE('',#47169,#47177,#47179,.T.); +#47177 = VERTEX_POINT('',#47178); +#47178 = CARTESIAN_POINT('',(-2.5764581915,2.11,0.282635182233)); +#47179 = CIRCLE('',#47180,0.1); +#47180 = AXIS2_PLACEMENT_3D('',#47181,#47182,#47183); +#47181 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.3)); +#47182 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47183 = DIRECTION('',(0.,0.,-1.)); +#47184 = ORIENTED_EDGE('',*,*,#47185,.T.); +#47185 = EDGE_CURVE('',#47177,#47186,#47188,.T.); +#47186 = VERTEX_POINT('',#47187); +#47187 = CARTESIAN_POINT('',(-2.495442325904,2.11,0.7770944533)); +#47188 = LINE('',#47189,#47190); +#47189 = CARTESIAN_POINT('',(-2.5764581915,2.11,0.282635182233)); +#47190 = VECTOR('',#47191,1.); +#47191 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47192 = ORIENTED_EDGE('',*,*,#47193,.T.); +#47193 = EDGE_CURVE('',#47186,#47194,#47196,.T.); +#47194 = VERTEX_POINT('',#47195); +#47195 = CARTESIAN_POINT('',(-2.2,2.11,1.025)); +#47196 = CIRCLE('',#47197,0.3); +#47197 = AXIS2_PLACEMENT_3D('',#47198,#47199,#47200); +#47198 = CARTESIAN_POINT('',(-2.2,2.11,0.725)); +#47199 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47200 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47201 = ORIENTED_EDGE('',*,*,#47202,.T.); +#47202 = EDGE_CURVE('',#47194,#44683,#47203,.T.); +#47203 = LINE('',#47204,#47205); +#47204 = CARTESIAN_POINT('',(-2.2,2.11,1.025)); +#47205 = VECTOR('',#47206,1.); +#47206 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47207 = PLANE('',#47208); +#47208 = AXIS2_PLACEMENT_3D('',#47209,#47210,#47211); +#47209 = CARTESIAN_POINT('',(-2.410970442936,2.11,0.528115505988)); +#47210 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47211 = DIRECTION('',(0.,-0.,1.)); +#47212 = ADVANCED_FACE('',(#47213),#47229,.F.); +#47213 = FACE_BOUND('',#47214,.F.); +#47214 = EDGE_LOOP('',(#47215,#47216,#47222,#47223)); +#47215 = ORIENTED_EDGE('',*,*,#44699,.T.); +#47216 = ORIENTED_EDGE('',*,*,#47217,.T.); +#47217 = EDGE_CURVE('',#44692,#45542,#47218,.T.); +#47218 = LINE('',#47219,#47220); +#47219 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#47220 = VECTOR('',#47221,1.); +#47221 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47222 = ORIENTED_EDGE('',*,*,#45541,.F.); +#47223 = ORIENTED_EDGE('',*,*,#47224,.F.); +#47224 = EDGE_CURVE('',#44683,#45534,#47225,.T.); +#47225 = LINE('',#47226,#47227); +#47226 = CARTESIAN_POINT('',(-2.2,2.11,1.025)); +#47227 = VECTOR('',#47228,1.); +#47228 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47229 = PLANE('',#47230); +#47230 = AXIS2_PLACEMENT_3D('',#47231,#47232,#47233); +#47231 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#47232 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#47233 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#47234 = ADVANCED_FACE('',(#47235),#47321,.F.); +#47235 = FACE_BOUND('',#47236,.F.); +#47236 = EDGE_LOOP('',(#47237,#47238,#47239,#47248,#47256,#47265,#47273, + #47281,#47289,#47298,#47306,#47315)); +#47237 = ORIENTED_EDGE('',*,*,#44691,.F.); +#47238 = ORIENTED_EDGE('',*,*,#44713,.T.); +#47239 = ORIENTED_EDGE('',*,*,#47240,.T.); +#47240 = EDGE_CURVE('',#44714,#47241,#47243,.T.); +#47241 = VERTEX_POINT('',#47242); +#47242 = CARTESIAN_POINT('',(-2.298480775301,2.97,0.742364817767)); +#47243 = CIRCLE('',#47244,0.1); +#47244 = AXIS2_PLACEMENT_3D('',#47245,#47246,#47247); +#47245 = CARTESIAN_POINT('',(-2.2,2.97,0.725)); +#47246 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47247 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47248 = ORIENTED_EDGE('',*,*,#47249,.T.); +#47249 = EDGE_CURVE('',#47241,#47250,#47252,.T.); +#47250 = VERTEX_POINT('',#47251); +#47251 = CARTESIAN_POINT('',(-2.379496640897,2.97,0.2479055467)); +#47252 = LINE('',#47253,#47254); +#47253 = CARTESIAN_POINT('',(-2.298480775301,2.97,0.742364817767)); +#47254 = VECTOR('',#47255,1.); +#47255 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47256 = ORIENTED_EDGE('',*,*,#47257,.T.); +#47257 = EDGE_CURVE('',#47250,#47258,#47260,.T.); +#47258 = VERTEX_POINT('',#47259); +#47259 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.)); +#47260 = CIRCLE('',#47261,0.3); +#47261 = AXIS2_PLACEMENT_3D('',#47262,#47263,#47264); +#47262 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.3)); +#47263 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47264 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47265 = ORIENTED_EDGE('',*,*,#47266,.T.); +#47266 = EDGE_CURVE('',#47258,#47267,#47269,.T.); +#47267 = VERTEX_POINT('',#47268); +#47268 = CARTESIAN_POINT('',(-3.,2.97,0.)); +#47269 = LINE('',#47270,#47271); +#47270 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.)); +#47271 = VECTOR('',#47272,1.); +#47272 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47273 = ORIENTED_EDGE('',*,*,#47274,.T.); +#47274 = EDGE_CURVE('',#47267,#47275,#47277,.T.); +#47275 = VERTEX_POINT('',#47276); +#47276 = CARTESIAN_POINT('',(-3.,2.97,0.2)); +#47277 = LINE('',#47278,#47279); +#47278 = CARTESIAN_POINT('',(-3.,2.97,0.)); +#47279 = VECTOR('',#47280,1.); +#47280 = DIRECTION('',(0.,0.,1.)); +#47281 = ORIENTED_EDGE('',*,*,#47282,.T.); +#47282 = EDGE_CURVE('',#47275,#47283,#47285,.T.); +#47283 = VERTEX_POINT('',#47284); +#47284 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.2)); +#47285 = LINE('',#47286,#47287); +#47286 = CARTESIAN_POINT('',(-3.,2.97,0.2)); +#47287 = VECTOR('',#47288,1.); +#47288 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47289 = ORIENTED_EDGE('',*,*,#47290,.T.); +#47290 = EDGE_CURVE('',#47283,#47291,#47293,.T.); +#47291 = VERTEX_POINT('',#47292); +#47292 = CARTESIAN_POINT('',(-2.5764581915,2.97,0.282635182233)); +#47293 = CIRCLE('',#47294,0.1); +#47294 = AXIS2_PLACEMENT_3D('',#47295,#47296,#47297); +#47295 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.3)); +#47296 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47297 = DIRECTION('',(0.,0.,-1.)); +#47298 = ORIENTED_EDGE('',*,*,#47299,.T.); +#47299 = EDGE_CURVE('',#47291,#47300,#47302,.T.); +#47300 = VERTEX_POINT('',#47301); +#47301 = CARTESIAN_POINT('',(-2.495442325904,2.97,0.7770944533)); +#47302 = LINE('',#47303,#47304); +#47303 = CARTESIAN_POINT('',(-2.5764581915,2.97,0.282635182233)); +#47304 = VECTOR('',#47305,1.); +#47305 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47306 = ORIENTED_EDGE('',*,*,#47307,.T.); +#47307 = EDGE_CURVE('',#47300,#47308,#47310,.T.); +#47308 = VERTEX_POINT('',#47309); +#47309 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#47310 = CIRCLE('',#47311,0.3); +#47311 = AXIS2_PLACEMENT_3D('',#47312,#47313,#47314); +#47312 = CARTESIAN_POINT('',(-2.2,2.97,0.725)); +#47313 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47314 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47315 = ORIENTED_EDGE('',*,*,#47316,.T.); +#47316 = EDGE_CURVE('',#47308,#44692,#47317,.T.); +#47317 = LINE('',#47318,#47319); +#47318 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#47319 = VECTOR('',#47320,1.); +#47320 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47321 = PLANE('',#47322); +#47322 = AXIS2_PLACEMENT_3D('',#47323,#47324,#47325); +#47323 = CARTESIAN_POINT('',(-2.410970442936,2.97,0.528115505988)); +#47324 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47325 = DIRECTION('',(0.,-0.,1.)); +#47326 = ADVANCED_FACE('',(#47327),#47346,.F.); +#47327 = FACE_BOUND('',#47328,.F.); +#47328 = EDGE_LOOP('',(#47329,#47330,#47339,#47345)); +#47329 = ORIENTED_EDGE('',*,*,#44730,.T.); +#47330 = ORIENTED_EDGE('',*,*,#47331,.T.); +#47331 = EDGE_CURVE('',#44723,#47332,#47334,.T.); +#47332 = VERTEX_POINT('',#47333); +#47333 = CARTESIAN_POINT('',(-2.298480775301,3.38,0.742364817767)); +#47334 = CIRCLE('',#47335,0.1); +#47335 = AXIS2_PLACEMENT_3D('',#47336,#47337,#47338); +#47336 = CARTESIAN_POINT('',(-2.2,3.38,0.725)); +#47337 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47338 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47339 = ORIENTED_EDGE('',*,*,#47340,.F.); +#47340 = EDGE_CURVE('',#47241,#47332,#47341,.T.); +#47341 = LINE('',#47342,#47343); +#47342 = CARTESIAN_POINT('',(-2.298480775301,2.97,0.742364817767)); +#47343 = VECTOR('',#47344,1.); +#47344 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47345 = ORIENTED_EDGE('',*,*,#47240,.F.); +#47346 = CYLINDRICAL_SURFACE('',#47347,0.1); +#47347 = AXIS2_PLACEMENT_3D('',#47348,#47349,#47350); +#47348 = CARTESIAN_POINT('',(-2.2,2.97,0.725)); +#47349 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#47350 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47351 = ADVANCED_FACE('',(#47352),#47430,.T.); +#47352 = FACE_BOUND('',#47353,.T.); +#47353 = EDGE_LOOP('',(#47354,#47355,#47356,#47357,#47365,#47374,#47382, + #47390,#47398,#47407,#47415,#47424)); +#47354 = ORIENTED_EDGE('',*,*,#44744,.F.); +#47355 = ORIENTED_EDGE('',*,*,#44722,.T.); +#47356 = ORIENTED_EDGE('',*,*,#47331,.T.); +#47357 = ORIENTED_EDGE('',*,*,#47358,.T.); +#47358 = EDGE_CURVE('',#47332,#47359,#47361,.T.); +#47359 = VERTEX_POINT('',#47360); +#47360 = CARTESIAN_POINT('',(-2.379496640897,3.38,0.2479055467)); +#47361 = LINE('',#47362,#47363); +#47362 = CARTESIAN_POINT('',(-2.298480775301,3.38,0.742364817767)); +#47363 = VECTOR('',#47364,1.); +#47364 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47365 = ORIENTED_EDGE('',*,*,#47366,.T.); +#47366 = EDGE_CURVE('',#47359,#47367,#47369,.T.); +#47367 = VERTEX_POINT('',#47368); +#47368 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.)); +#47369 = CIRCLE('',#47370,0.3); +#47370 = AXIS2_PLACEMENT_3D('',#47371,#47372,#47373); +#47371 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.3)); +#47372 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47373 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47374 = ORIENTED_EDGE('',*,*,#47375,.T.); +#47375 = EDGE_CURVE('',#47367,#47376,#47378,.T.); +#47376 = VERTEX_POINT('',#47377); +#47377 = CARTESIAN_POINT('',(-3.,3.38,0.)); +#47378 = LINE('',#47379,#47380); +#47379 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.)); +#47380 = VECTOR('',#47381,1.); +#47381 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47382 = ORIENTED_EDGE('',*,*,#47383,.T.); +#47383 = EDGE_CURVE('',#47376,#47384,#47386,.T.); +#47384 = VERTEX_POINT('',#47385); +#47385 = CARTESIAN_POINT('',(-3.,3.38,0.2)); +#47386 = LINE('',#47387,#47388); +#47387 = CARTESIAN_POINT('',(-3.,3.38,0.)); +#47388 = VECTOR('',#47389,1.); +#47389 = DIRECTION('',(0.,0.,1.)); +#47390 = ORIENTED_EDGE('',*,*,#47391,.T.); +#47391 = EDGE_CURVE('',#47384,#47392,#47394,.T.); +#47392 = VERTEX_POINT('',#47393); +#47393 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.2)); +#47394 = LINE('',#47395,#47396); +#47395 = CARTESIAN_POINT('',(-3.,3.38,0.2)); +#47396 = VECTOR('',#47397,1.); +#47397 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47398 = ORIENTED_EDGE('',*,*,#47399,.T.); +#47399 = EDGE_CURVE('',#47392,#47400,#47402,.T.); +#47400 = VERTEX_POINT('',#47401); +#47401 = CARTESIAN_POINT('',(-2.5764581915,3.38,0.282635182233)); +#47402 = CIRCLE('',#47403,0.1); +#47403 = AXIS2_PLACEMENT_3D('',#47404,#47405,#47406); +#47404 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.3)); +#47405 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47406 = DIRECTION('',(0.,0.,-1.)); +#47407 = ORIENTED_EDGE('',*,*,#47408,.T.); +#47408 = EDGE_CURVE('',#47400,#47409,#47411,.T.); +#47409 = VERTEX_POINT('',#47410); +#47410 = CARTESIAN_POINT('',(-2.495442325904,3.38,0.7770944533)); +#47411 = LINE('',#47412,#47413); +#47412 = CARTESIAN_POINT('',(-2.5764581915,3.38,0.282635182233)); +#47413 = VECTOR('',#47414,1.); +#47414 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47415 = ORIENTED_EDGE('',*,*,#47416,.T.); +#47416 = EDGE_CURVE('',#47409,#47417,#47419,.T.); +#47417 = VERTEX_POINT('',#47418); +#47418 = CARTESIAN_POINT('',(-2.2,3.38,1.025)); +#47419 = CIRCLE('',#47420,0.3); +#47420 = AXIS2_PLACEMENT_3D('',#47421,#47422,#47423); +#47421 = CARTESIAN_POINT('',(-2.2,3.38,0.725)); +#47422 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47423 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47424 = ORIENTED_EDGE('',*,*,#47425,.T.); +#47425 = EDGE_CURVE('',#47417,#44745,#47426,.T.); +#47426 = LINE('',#47427,#47428); +#47427 = CARTESIAN_POINT('',(-2.2,3.38,1.025)); +#47428 = VECTOR('',#47429,1.); +#47429 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47430 = PLANE('',#47431); +#47431 = AXIS2_PLACEMENT_3D('',#47432,#47433,#47434); +#47432 = CARTESIAN_POINT('',(-2.410970442936,3.38,0.528115505988)); +#47433 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47434 = DIRECTION('',(0.,-0.,1.)); +#47435 = ADVANCED_FACE('',(#47436),#47447,.F.); +#47436 = FACE_BOUND('',#47437,.F.); +#47437 = EDGE_LOOP('',(#47438,#47439,#47440,#47441)); +#47438 = ORIENTED_EDGE('',*,*,#44761,.T.); +#47439 = ORIENTED_EDGE('',*,*,#45429,.T.); +#47440 = ORIENTED_EDGE('',*,*,#45557,.F.); +#47441 = ORIENTED_EDGE('',*,*,#47442,.F.); +#47442 = EDGE_CURVE('',#44745,#45550,#47443,.T.); +#47443 = LINE('',#47444,#47445); +#47444 = CARTESIAN_POINT('',(-2.2,3.38,1.025)); +#47445 = VECTOR('',#47446,1.); +#47446 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47447 = PLANE('',#47448); +#47448 = AXIS2_PLACEMENT_3D('',#47449,#47450,#47451); +#47449 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#47450 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#47451 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#47452 = ADVANCED_FACE('',(#47453),#47532,.F.); +#47453 = FACE_BOUND('',#47454,.F.); +#47454 = EDGE_LOOP('',(#47455,#47456,#47457,#47466,#47474,#47483,#47491, + #47499,#47507,#47516,#47524,#47531)); +#47455 = ORIENTED_EDGE('',*,*,#44753,.F.); +#47456 = ORIENTED_EDGE('',*,*,#44775,.T.); +#47457 = ORIENTED_EDGE('',*,*,#47458,.T.); +#47458 = EDGE_CURVE('',#44776,#47459,#47461,.T.); +#47459 = VERTEX_POINT('',#47460); +#47460 = CARTESIAN_POINT('',(-2.298480775301,4.24,0.742364817767)); +#47461 = CIRCLE('',#47462,0.1); +#47462 = AXIS2_PLACEMENT_3D('',#47463,#47464,#47465); +#47463 = CARTESIAN_POINT('',(-2.2,4.24,0.725)); +#47464 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47465 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47466 = ORIENTED_EDGE('',*,*,#47467,.T.); +#47467 = EDGE_CURVE('',#47459,#47468,#47470,.T.); +#47468 = VERTEX_POINT('',#47469); +#47469 = CARTESIAN_POINT('',(-2.379496640897,4.24,0.2479055467)); +#47470 = LINE('',#47471,#47472); +#47471 = CARTESIAN_POINT('',(-2.298480775301,4.24,0.742364817767)); +#47472 = VECTOR('',#47473,1.); +#47473 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47474 = ORIENTED_EDGE('',*,*,#47475,.T.); +#47475 = EDGE_CURVE('',#47468,#47476,#47478,.T.); +#47476 = VERTEX_POINT('',#47477); +#47477 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.)); +#47478 = CIRCLE('',#47479,0.3); +#47479 = AXIS2_PLACEMENT_3D('',#47480,#47481,#47482); +#47480 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.3)); +#47481 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47482 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47483 = ORIENTED_EDGE('',*,*,#47484,.T.); +#47484 = EDGE_CURVE('',#47476,#47485,#47487,.T.); +#47485 = VERTEX_POINT('',#47486); +#47486 = CARTESIAN_POINT('',(-3.,4.24,0.)); +#47487 = LINE('',#47488,#47489); +#47488 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.)); +#47489 = VECTOR('',#47490,1.); +#47490 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47491 = ORIENTED_EDGE('',*,*,#47492,.T.); +#47492 = EDGE_CURVE('',#47485,#47493,#47495,.T.); +#47493 = VERTEX_POINT('',#47494); +#47494 = CARTESIAN_POINT('',(-3.,4.24,0.2)); +#47495 = LINE('',#47496,#47497); +#47496 = CARTESIAN_POINT('',(-3.,4.24,0.)); +#47497 = VECTOR('',#47498,1.); +#47498 = DIRECTION('',(0.,0.,1.)); +#47499 = ORIENTED_EDGE('',*,*,#47500,.T.); +#47500 = EDGE_CURVE('',#47493,#47501,#47503,.T.); +#47501 = VERTEX_POINT('',#47502); +#47502 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.2)); +#47503 = LINE('',#47504,#47505); +#47504 = CARTESIAN_POINT('',(-3.,4.24,0.2)); +#47505 = VECTOR('',#47506,1.); +#47506 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47507 = ORIENTED_EDGE('',*,*,#47508,.T.); +#47508 = EDGE_CURVE('',#47501,#47509,#47511,.T.); +#47509 = VERTEX_POINT('',#47510); +#47510 = CARTESIAN_POINT('',(-2.5764581915,4.24,0.282635182233)); +#47511 = CIRCLE('',#47512,0.1); +#47512 = AXIS2_PLACEMENT_3D('',#47513,#47514,#47515); +#47513 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.3)); +#47514 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47515 = DIRECTION('',(0.,0.,-1.)); +#47516 = ORIENTED_EDGE('',*,*,#47517,.T.); +#47517 = EDGE_CURVE('',#47509,#47518,#47520,.T.); +#47518 = VERTEX_POINT('',#47519); +#47519 = CARTESIAN_POINT('',(-2.495442325904,4.24,0.7770944533)); +#47520 = LINE('',#47521,#47522); +#47521 = CARTESIAN_POINT('',(-2.5764581915,4.24,0.282635182233)); +#47522 = VECTOR('',#47523,1.); +#47523 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47524 = ORIENTED_EDGE('',*,*,#47525,.T.); +#47525 = EDGE_CURVE('',#47518,#45399,#47526,.T.); +#47526 = CIRCLE('',#47527,0.3); +#47527 = AXIS2_PLACEMENT_3D('',#47528,#47529,#47530); +#47528 = CARTESIAN_POINT('',(-2.2,4.24,0.725)); +#47529 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47530 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47531 = ORIENTED_EDGE('',*,*,#45398,.T.); +#47532 = PLANE('',#47533); +#47533 = AXIS2_PLACEMENT_3D('',#47534,#47535,#47536); +#47534 = CARTESIAN_POINT('',(-2.410970442936,4.24,0.528115505988)); +#47535 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47536 = DIRECTION('',(0.,-0.,1.)); +#47537 = ADVANCED_FACE('',(#47538),#47557,.F.); +#47538 = FACE_BOUND('',#47539,.F.); +#47539 = EDGE_LOOP('',(#47540,#47541,#47550,#47556)); +#47540 = ORIENTED_EDGE('',*,*,#44792,.T.); +#47541 = ORIENTED_EDGE('',*,*,#47542,.T.); +#47542 = EDGE_CURVE('',#44785,#47543,#47545,.T.); +#47543 = VERTEX_POINT('',#47544); +#47544 = CARTESIAN_POINT('',(-2.298480775301,4.65,0.742364817767)); +#47545 = CIRCLE('',#47546,0.1); +#47546 = AXIS2_PLACEMENT_3D('',#47547,#47548,#47549); +#47547 = CARTESIAN_POINT('',(-2.2,4.65,0.725)); +#47548 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47549 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47550 = ORIENTED_EDGE('',*,*,#47551,.F.); +#47551 = EDGE_CURVE('',#47459,#47543,#47552,.T.); +#47552 = LINE('',#47553,#47554); +#47553 = CARTESIAN_POINT('',(-2.298480775301,4.24,0.742364817767)); +#47554 = VECTOR('',#47555,1.); +#47555 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47556 = ORIENTED_EDGE('',*,*,#47458,.F.); +#47557 = CYLINDRICAL_SURFACE('',#47558,0.1); +#47558 = AXIS2_PLACEMENT_3D('',#47559,#47560,#47561); +#47559 = CARTESIAN_POINT('',(-2.2,4.24,0.725)); +#47560 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#47561 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47562 = ADVANCED_FACE('',(#47563),#47634,.T.); +#47563 = FACE_BOUND('',#47564,.T.); +#47564 = EDGE_LOOP('',(#47565,#47566,#47567,#47568,#47576,#47585,#47593, + #47601,#47609,#47618,#47626,#47633)); +#47565 = ORIENTED_EDGE('',*,*,#44806,.F.); +#47566 = ORIENTED_EDGE('',*,*,#44784,.T.); +#47567 = ORIENTED_EDGE('',*,*,#47542,.T.); +#47568 = ORIENTED_EDGE('',*,*,#47569,.T.); +#47569 = EDGE_CURVE('',#47543,#47570,#47572,.T.); +#47570 = VERTEX_POINT('',#47571); +#47571 = CARTESIAN_POINT('',(-2.379496640897,4.65,0.2479055467)); +#47572 = LINE('',#47573,#47574); +#47573 = CARTESIAN_POINT('',(-2.298480775301,4.65,0.742364817767)); +#47574 = VECTOR('',#47575,1.); +#47575 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47576 = ORIENTED_EDGE('',*,*,#47577,.T.); +#47577 = EDGE_CURVE('',#47570,#47578,#47580,.T.); +#47578 = VERTEX_POINT('',#47579); +#47579 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.)); +#47580 = CIRCLE('',#47581,0.3); +#47581 = AXIS2_PLACEMENT_3D('',#47582,#47583,#47584); +#47582 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.3)); +#47583 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47584 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47585 = ORIENTED_EDGE('',*,*,#47586,.T.); +#47586 = EDGE_CURVE('',#47578,#47587,#47589,.T.); +#47587 = VERTEX_POINT('',#47588); +#47588 = CARTESIAN_POINT('',(-3.,4.65,0.)); +#47589 = LINE('',#47590,#47591); +#47590 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.)); +#47591 = VECTOR('',#47592,1.); +#47592 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47593 = ORIENTED_EDGE('',*,*,#47594,.T.); +#47594 = EDGE_CURVE('',#47587,#47595,#47597,.T.); +#47595 = VERTEX_POINT('',#47596); +#47596 = CARTESIAN_POINT('',(-3.,4.65,0.2)); +#47597 = LINE('',#47598,#47599); +#47598 = CARTESIAN_POINT('',(-3.,4.65,0.)); +#47599 = VECTOR('',#47600,1.); +#47600 = DIRECTION('',(0.,0.,1.)); +#47601 = ORIENTED_EDGE('',*,*,#47602,.T.); +#47602 = EDGE_CURVE('',#47595,#47603,#47605,.T.); +#47603 = VERTEX_POINT('',#47604); +#47604 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.2)); +#47605 = LINE('',#47606,#47607); +#47606 = CARTESIAN_POINT('',(-3.,4.65,0.2)); +#47607 = VECTOR('',#47608,1.); +#47608 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47609 = ORIENTED_EDGE('',*,*,#47610,.T.); +#47610 = EDGE_CURVE('',#47603,#47611,#47613,.T.); +#47611 = VERTEX_POINT('',#47612); +#47612 = CARTESIAN_POINT('',(-2.5764581915,4.65,0.282635182233)); +#47613 = CIRCLE('',#47614,0.1); +#47614 = AXIS2_PLACEMENT_3D('',#47615,#47616,#47617); +#47615 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.3)); +#47616 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47617 = DIRECTION('',(0.,0.,-1.)); +#47618 = ORIENTED_EDGE('',*,*,#47619,.T.); +#47619 = EDGE_CURVE('',#47611,#47620,#47622,.T.); +#47620 = VERTEX_POINT('',#47621); +#47621 = CARTESIAN_POINT('',(-2.495442325904,4.65,0.7770944533)); +#47622 = LINE('',#47623,#47624); +#47623 = CARTESIAN_POINT('',(-2.5764581915,4.65,0.282635182233)); +#47624 = VECTOR('',#47625,1.); +#47625 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47626 = ORIENTED_EDGE('',*,*,#47627,.T.); +#47627 = EDGE_CURVE('',#47620,#45407,#47628,.T.); +#47628 = CIRCLE('',#47629,0.3); +#47629 = AXIS2_PLACEMENT_3D('',#47630,#47631,#47632); +#47630 = CARTESIAN_POINT('',(-2.2,4.65,0.725)); +#47631 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47632 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47633 = ORIENTED_EDGE('',*,*,#45414,.T.); +#47634 = PLANE('',#47635); +#47635 = AXIS2_PLACEMENT_3D('',#47636,#47637,#47638); +#47636 = CARTESIAN_POINT('',(-2.410970442936,4.65,0.528115505988)); +#47637 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47638 = DIRECTION('',(0.,-0.,1.)); +#47639 = ADVANCED_FACE('',(#47640),#47719,.F.); +#47640 = FACE_BOUND('',#47641,.F.); +#47641 = EDGE_LOOP('',(#47642,#47643,#47644,#47653,#47661,#47670,#47678, + #47686,#47694,#47703,#47711,#47718)); +#47642 = ORIENTED_EDGE('',*,*,#44825,.F.); +#47643 = ORIENTED_EDGE('',*,*,#44840,.T.); +#47644 = ORIENTED_EDGE('',*,*,#47645,.T.); +#47645 = EDGE_CURVE('',#44841,#47646,#47648,.T.); +#47646 = VERTEX_POINT('',#47647); +#47647 = CARTESIAN_POINT('',(2.298480775301,4.65,0.742364817767)); +#47648 = CIRCLE('',#47649,0.1); +#47649 = AXIS2_PLACEMENT_3D('',#47650,#47651,#47652); +#47650 = CARTESIAN_POINT('',(2.2,4.65,0.725)); +#47651 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47652 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#47653 = ORIENTED_EDGE('',*,*,#47654,.T.); +#47654 = EDGE_CURVE('',#47646,#47655,#47657,.T.); +#47655 = VERTEX_POINT('',#47656); +#47656 = CARTESIAN_POINT('',(2.379496640897,4.65,0.2479055467)); +#47657 = LINE('',#47658,#47659); +#47658 = CARTESIAN_POINT('',(2.298480775301,4.65,0.742364817767)); +#47659 = VECTOR('',#47660,1.); +#47660 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#47661 = ORIENTED_EDGE('',*,*,#47662,.T.); +#47662 = EDGE_CURVE('',#47655,#47663,#47665,.T.); +#47663 = VERTEX_POINT('',#47664); +#47664 = CARTESIAN_POINT('',(2.674938966801,4.65,0.)); +#47665 = CIRCLE('',#47666,0.3); +#47666 = AXIS2_PLACEMENT_3D('',#47667,#47668,#47669); +#47667 = CARTESIAN_POINT('',(2.674938966801,4.65,0.3)); +#47668 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47669 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#47670 = ORIENTED_EDGE('',*,*,#47671,.T.); +#47671 = EDGE_CURVE('',#47663,#47672,#47674,.T.); +#47672 = VERTEX_POINT('',#47673); +#47673 = CARTESIAN_POINT('',(3.,4.65,0.)); +#47674 = LINE('',#47675,#47676); +#47675 = CARTESIAN_POINT('',(2.674938966801,4.65,0.)); +#47676 = VECTOR('',#47677,1.); +#47677 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#47678 = ORIENTED_EDGE('',*,*,#47679,.T.); +#47679 = EDGE_CURVE('',#47672,#47680,#47682,.T.); +#47680 = VERTEX_POINT('',#47681); +#47681 = CARTESIAN_POINT('',(3.,4.65,0.2)); +#47682 = LINE('',#47683,#47684); +#47683 = CARTESIAN_POINT('',(3.,4.65,0.)); +#47684 = VECTOR('',#47685,1.); +#47685 = DIRECTION('',(0.,0.,1.)); +#47686 = ORIENTED_EDGE('',*,*,#47687,.T.); +#47687 = EDGE_CURVE('',#47680,#47688,#47690,.T.); +#47688 = VERTEX_POINT('',#47689); +#47689 = CARTESIAN_POINT('',(2.674938966801,4.65,0.2)); +#47690 = LINE('',#47691,#47692); +#47691 = CARTESIAN_POINT('',(3.,4.65,0.2)); +#47692 = VECTOR('',#47693,1.); +#47693 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47694 = ORIENTED_EDGE('',*,*,#47695,.T.); +#47695 = EDGE_CURVE('',#47688,#47696,#47698,.T.); +#47696 = VERTEX_POINT('',#47697); +#47697 = CARTESIAN_POINT('',(2.5764581915,4.65,0.282635182233)); +#47698 = CIRCLE('',#47699,0.1); +#47699 = AXIS2_PLACEMENT_3D('',#47700,#47701,#47702); +#47700 = CARTESIAN_POINT('',(2.674938966801,4.65,0.3)); +#47701 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47702 = DIRECTION('',(0.,0.,-1.)); +#47703 = ORIENTED_EDGE('',*,*,#47704,.T.); +#47704 = EDGE_CURVE('',#47696,#47705,#47707,.T.); +#47705 = VERTEX_POINT('',#47706); +#47706 = CARTESIAN_POINT('',(2.495442325904,4.65,0.7770944533)); +#47707 = LINE('',#47708,#47709); +#47708 = CARTESIAN_POINT('',(2.5764581915,4.65,0.282635182233)); +#47709 = VECTOR('',#47710,1.); +#47710 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#47711 = ORIENTED_EDGE('',*,*,#47712,.T.); +#47712 = EDGE_CURVE('',#47705,#45814,#47713,.T.); +#47713 = CIRCLE('',#47714,0.3); +#47714 = AXIS2_PLACEMENT_3D('',#47715,#47716,#47717); +#47715 = CARTESIAN_POINT('',(2.2,4.65,0.725)); +#47716 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47717 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#47718 = ORIENTED_EDGE('',*,*,#45813,.T.); +#47719 = PLANE('',#47720); +#47720 = AXIS2_PLACEMENT_3D('',#47721,#47722,#47723); +#47721 = CARTESIAN_POINT('',(2.410970442936,4.65,0.528115505988)); +#47722 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47723 = DIRECTION('',(0.,0.,1.)); +#47724 = ADVANCED_FACE('',(#47725),#47744,.F.); +#47725 = FACE_BOUND('',#47726,.F.); +#47726 = EDGE_LOOP('',(#47727,#47728,#47737,#47743)); +#47727 = ORIENTED_EDGE('',*,*,#44857,.T.); +#47728 = ORIENTED_EDGE('',*,*,#47729,.T.); +#47729 = EDGE_CURVE('',#44850,#47730,#47732,.T.); +#47730 = VERTEX_POINT('',#47731); +#47731 = CARTESIAN_POINT('',(2.298480775301,4.24,0.742364817767)); +#47732 = CIRCLE('',#47733,0.1); +#47733 = AXIS2_PLACEMENT_3D('',#47734,#47735,#47736); +#47734 = CARTESIAN_POINT('',(2.2,4.24,0.725)); +#47735 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47736 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#47737 = ORIENTED_EDGE('',*,*,#47738,.F.); +#47738 = EDGE_CURVE('',#47646,#47730,#47739,.T.); +#47739 = LINE('',#47740,#47741); +#47740 = CARTESIAN_POINT('',(2.298480775301,4.65,0.742364817767)); +#47741 = VECTOR('',#47742,1.); +#47742 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47743 = ORIENTED_EDGE('',*,*,#47645,.F.); +#47744 = CYLINDRICAL_SURFACE('',#47745,0.1); +#47745 = AXIS2_PLACEMENT_3D('',#47746,#47747,#47748); +#47746 = CARTESIAN_POINT('',(2.2,4.65,0.725)); +#47747 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47748 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#47749 = ADVANCED_FACE('',(#47750),#47821,.T.); +#47750 = FACE_BOUND('',#47751,.T.); +#47751 = EDGE_LOOP('',(#47752,#47753,#47754,#47755,#47763,#47772,#47780, + #47788,#47796,#47805,#47813,#47820)); +#47752 = ORIENTED_EDGE('',*,*,#44871,.F.); +#47753 = ORIENTED_EDGE('',*,*,#44849,.T.); +#47754 = ORIENTED_EDGE('',*,*,#47729,.T.); +#47755 = ORIENTED_EDGE('',*,*,#47756,.T.); +#47756 = EDGE_CURVE('',#47730,#47757,#47759,.T.); +#47757 = VERTEX_POINT('',#47758); +#47758 = CARTESIAN_POINT('',(2.379496640897,4.24,0.2479055467)); +#47759 = LINE('',#47760,#47761); +#47760 = CARTESIAN_POINT('',(2.298480775301,4.24,0.742364817767)); +#47761 = VECTOR('',#47762,1.); +#47762 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#47763 = ORIENTED_EDGE('',*,*,#47764,.T.); +#47764 = EDGE_CURVE('',#47757,#47765,#47767,.T.); +#47765 = VERTEX_POINT('',#47766); +#47766 = CARTESIAN_POINT('',(2.674938966801,4.24,0.)); +#47767 = CIRCLE('',#47768,0.3); +#47768 = AXIS2_PLACEMENT_3D('',#47769,#47770,#47771); +#47769 = CARTESIAN_POINT('',(2.674938966801,4.24,0.3)); +#47770 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47771 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#47772 = ORIENTED_EDGE('',*,*,#47773,.T.); +#47773 = EDGE_CURVE('',#47765,#47774,#47776,.T.); +#47774 = VERTEX_POINT('',#47775); +#47775 = CARTESIAN_POINT('',(3.,4.24,0.)); +#47776 = LINE('',#47777,#47778); +#47777 = CARTESIAN_POINT('',(2.674938966801,4.24,0.)); +#47778 = VECTOR('',#47779,1.); +#47779 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#47780 = ORIENTED_EDGE('',*,*,#47781,.T.); +#47781 = EDGE_CURVE('',#47774,#47782,#47784,.T.); +#47782 = VERTEX_POINT('',#47783); +#47783 = CARTESIAN_POINT('',(3.,4.24,0.2)); +#47784 = LINE('',#47785,#47786); +#47785 = CARTESIAN_POINT('',(3.,4.24,0.)); +#47786 = VECTOR('',#47787,1.); +#47787 = DIRECTION('',(0.,0.,1.)); +#47788 = ORIENTED_EDGE('',*,*,#47789,.T.); +#47789 = EDGE_CURVE('',#47782,#47790,#47792,.T.); +#47790 = VERTEX_POINT('',#47791); +#47791 = CARTESIAN_POINT('',(2.674938966801,4.24,0.2)); +#47792 = LINE('',#47793,#47794); +#47793 = CARTESIAN_POINT('',(3.,4.24,0.2)); +#47794 = VECTOR('',#47795,1.); +#47795 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47796 = ORIENTED_EDGE('',*,*,#47797,.T.); +#47797 = EDGE_CURVE('',#47790,#47798,#47800,.T.); +#47798 = VERTEX_POINT('',#47799); +#47799 = CARTESIAN_POINT('',(2.5764581915,4.24,0.282635182233)); +#47800 = CIRCLE('',#47801,0.1); +#47801 = AXIS2_PLACEMENT_3D('',#47802,#47803,#47804); +#47802 = CARTESIAN_POINT('',(2.674938966801,4.24,0.3)); +#47803 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47804 = DIRECTION('',(0.,0.,-1.)); +#47805 = ORIENTED_EDGE('',*,*,#47806,.T.); +#47806 = EDGE_CURVE('',#47798,#47807,#47809,.T.); +#47807 = VERTEX_POINT('',#47808); +#47808 = CARTESIAN_POINT('',(2.495442325904,4.24,0.7770944533)); +#47809 = LINE('',#47810,#47811); +#47810 = CARTESIAN_POINT('',(2.5764581915,4.24,0.282635182233)); +#47811 = VECTOR('',#47812,1.); +#47812 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#47813 = ORIENTED_EDGE('',*,*,#47814,.T.); +#47814 = EDGE_CURVE('',#47807,#45822,#47815,.T.); +#47815 = CIRCLE('',#47816,0.3); +#47816 = AXIS2_PLACEMENT_3D('',#47817,#47818,#47819); +#47817 = CARTESIAN_POINT('',(2.2,4.24,0.725)); +#47818 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47819 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#47820 = ORIENTED_EDGE('',*,*,#45829,.T.); +#47821 = PLANE('',#47822); +#47822 = AXIS2_PLACEMENT_3D('',#47823,#47824,#47825); +#47823 = CARTESIAN_POINT('',(2.410970442936,4.24,0.528115505988)); +#47824 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47825 = DIRECTION('',(0.,0.,1.)); +#47826 = ADVANCED_FACE('',(#47827),#47838,.F.); +#47827 = FACE_BOUND('',#47828,.F.); +#47828 = EDGE_LOOP('',(#47829,#47830,#47831,#47837)); +#47829 = ORIENTED_EDGE('',*,*,#45835,.F.); +#47830 = ORIENTED_EDGE('',*,*,#44888,.T.); +#47831 = ORIENTED_EDGE('',*,*,#47832,.T.); +#47832 = EDGE_CURVE('',#44881,#45672,#47833,.T.); +#47833 = LINE('',#47834,#47835); +#47834 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#47835 = VECTOR('',#47836,1.); +#47836 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47837 = ORIENTED_EDGE('',*,*,#45671,.F.); +#47838 = PLANE('',#47839); +#47839 = AXIS2_PLACEMENT_3D('',#47840,#47841,#47842); +#47840 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#47841 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#47842 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#47843 = ADVANCED_FACE('',(#47844),#47930,.F.); +#47844 = FACE_BOUND('',#47845,.F.); +#47845 = EDGE_LOOP('',(#47846,#47847,#47848,#47857,#47865,#47874,#47882, + #47890,#47898,#47907,#47915,#47924)); +#47846 = ORIENTED_EDGE('',*,*,#44880,.F.); +#47847 = ORIENTED_EDGE('',*,*,#44902,.T.); +#47848 = ORIENTED_EDGE('',*,*,#47849,.T.); +#47849 = EDGE_CURVE('',#44903,#47850,#47852,.T.); +#47850 = VERTEX_POINT('',#47851); +#47851 = CARTESIAN_POINT('',(2.298480775301,3.38,0.742364817767)); +#47852 = CIRCLE('',#47853,0.1); +#47853 = AXIS2_PLACEMENT_3D('',#47854,#47855,#47856); +#47854 = CARTESIAN_POINT('',(2.2,3.38,0.725)); +#47855 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47856 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#47857 = ORIENTED_EDGE('',*,*,#47858,.T.); +#47858 = EDGE_CURVE('',#47850,#47859,#47861,.T.); +#47859 = VERTEX_POINT('',#47860); +#47860 = CARTESIAN_POINT('',(2.379496640897,3.38,0.2479055467)); +#47861 = LINE('',#47862,#47863); +#47862 = CARTESIAN_POINT('',(2.298480775301,3.38,0.742364817767)); +#47863 = VECTOR('',#47864,1.); +#47864 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#47865 = ORIENTED_EDGE('',*,*,#47866,.T.); +#47866 = EDGE_CURVE('',#47859,#47867,#47869,.T.); +#47867 = VERTEX_POINT('',#47868); +#47868 = CARTESIAN_POINT('',(2.674938966801,3.38,0.)); +#47869 = CIRCLE('',#47870,0.3); +#47870 = AXIS2_PLACEMENT_3D('',#47871,#47872,#47873); +#47871 = CARTESIAN_POINT('',(2.674938966801,3.38,0.3)); +#47872 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47873 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#47874 = ORIENTED_EDGE('',*,*,#47875,.T.); +#47875 = EDGE_CURVE('',#47867,#47876,#47878,.T.); +#47876 = VERTEX_POINT('',#47877); +#47877 = CARTESIAN_POINT('',(3.,3.38,0.)); +#47878 = LINE('',#47879,#47880); +#47879 = CARTESIAN_POINT('',(2.674938966801,3.38,0.)); +#47880 = VECTOR('',#47881,1.); +#47881 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#47882 = ORIENTED_EDGE('',*,*,#47883,.T.); +#47883 = EDGE_CURVE('',#47876,#47884,#47886,.T.); +#47884 = VERTEX_POINT('',#47885); +#47885 = CARTESIAN_POINT('',(3.,3.38,0.2)); +#47886 = LINE('',#47887,#47888); +#47887 = CARTESIAN_POINT('',(3.,3.38,0.)); +#47888 = VECTOR('',#47889,1.); +#47889 = DIRECTION('',(0.,0.,1.)); +#47890 = ORIENTED_EDGE('',*,*,#47891,.T.); +#47891 = EDGE_CURVE('',#47884,#47892,#47894,.T.); +#47892 = VERTEX_POINT('',#47893); +#47893 = CARTESIAN_POINT('',(2.674938966801,3.38,0.2)); +#47894 = LINE('',#47895,#47896); +#47895 = CARTESIAN_POINT('',(3.,3.38,0.2)); +#47896 = VECTOR('',#47897,1.); +#47897 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47898 = ORIENTED_EDGE('',*,*,#47899,.T.); +#47899 = EDGE_CURVE('',#47892,#47900,#47902,.T.); +#47900 = VERTEX_POINT('',#47901); +#47901 = CARTESIAN_POINT('',(2.5764581915,3.38,0.282635182233)); +#47902 = CIRCLE('',#47903,0.1); +#47903 = AXIS2_PLACEMENT_3D('',#47904,#47905,#47906); +#47904 = CARTESIAN_POINT('',(2.674938966801,3.38,0.3)); +#47905 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47906 = DIRECTION('',(0.,0.,-1.)); +#47907 = ORIENTED_EDGE('',*,*,#47908,.T.); +#47908 = EDGE_CURVE('',#47900,#47909,#47911,.T.); +#47909 = VERTEX_POINT('',#47910); +#47910 = CARTESIAN_POINT('',(2.495442325904,3.38,0.7770944533)); +#47911 = LINE('',#47912,#47913); +#47912 = CARTESIAN_POINT('',(2.5764581915,3.38,0.282635182233)); +#47913 = VECTOR('',#47914,1.); +#47914 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#47915 = ORIENTED_EDGE('',*,*,#47916,.T.); +#47916 = EDGE_CURVE('',#47909,#47917,#47919,.T.); +#47917 = VERTEX_POINT('',#47918); +#47918 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#47919 = CIRCLE('',#47920,0.3); +#47920 = AXIS2_PLACEMENT_3D('',#47921,#47922,#47923); +#47921 = CARTESIAN_POINT('',(2.2,3.38,0.725)); +#47922 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47923 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#47924 = ORIENTED_EDGE('',*,*,#47925,.T.); +#47925 = EDGE_CURVE('',#47917,#44881,#47926,.T.); +#47926 = LINE('',#47927,#47928); +#47927 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#47928 = VECTOR('',#47929,1.); +#47929 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47930 = PLANE('',#47931); +#47931 = AXIS2_PLACEMENT_3D('',#47932,#47933,#47934); +#47932 = CARTESIAN_POINT('',(2.410970442936,3.38,0.528115505988)); +#47933 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47934 = DIRECTION('',(0.,0.,1.)); +#47935 = ADVANCED_FACE('',(#47936),#47955,.F.); +#47936 = FACE_BOUND('',#47937,.F.); +#47937 = EDGE_LOOP('',(#47938,#47939,#47948,#47954)); +#47938 = ORIENTED_EDGE('',*,*,#44919,.T.); +#47939 = ORIENTED_EDGE('',*,*,#47940,.T.); +#47940 = EDGE_CURVE('',#44912,#47941,#47943,.T.); +#47941 = VERTEX_POINT('',#47942); +#47942 = CARTESIAN_POINT('',(2.298480775301,2.97,0.742364817767)); +#47943 = CIRCLE('',#47944,0.1); +#47944 = AXIS2_PLACEMENT_3D('',#47945,#47946,#47947); +#47945 = CARTESIAN_POINT('',(2.2,2.97,0.725)); +#47946 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47947 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#47948 = ORIENTED_EDGE('',*,*,#47949,.F.); +#47949 = EDGE_CURVE('',#47850,#47941,#47950,.T.); +#47950 = LINE('',#47951,#47952); +#47951 = CARTESIAN_POINT('',(2.298480775301,3.38,0.742364817767)); +#47952 = VECTOR('',#47953,1.); +#47953 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47954 = ORIENTED_EDGE('',*,*,#47849,.F.); +#47955 = CYLINDRICAL_SURFACE('',#47956,0.1); +#47956 = AXIS2_PLACEMENT_3D('',#47957,#47958,#47959); +#47957 = CARTESIAN_POINT('',(2.2,3.38,0.725)); +#47958 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47959 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#47960 = ADVANCED_FACE('',(#47961),#48039,.T.); +#47961 = FACE_BOUND('',#47962,.T.); +#47962 = EDGE_LOOP('',(#47963,#47964,#47965,#47966,#47974,#47983,#47991, + #47999,#48007,#48016,#48024,#48033)); +#47963 = ORIENTED_EDGE('',*,*,#44933,.F.); +#47964 = ORIENTED_EDGE('',*,*,#44911,.T.); +#47965 = ORIENTED_EDGE('',*,*,#47940,.T.); +#47966 = ORIENTED_EDGE('',*,*,#47967,.T.); +#47967 = EDGE_CURVE('',#47941,#47968,#47970,.T.); +#47968 = VERTEX_POINT('',#47969); +#47969 = CARTESIAN_POINT('',(2.379496640897,2.97,0.2479055467)); +#47970 = LINE('',#47971,#47972); +#47971 = CARTESIAN_POINT('',(2.298480775301,2.97,0.742364817767)); +#47972 = VECTOR('',#47973,1.); +#47973 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#47974 = ORIENTED_EDGE('',*,*,#47975,.T.); +#47975 = EDGE_CURVE('',#47968,#47976,#47978,.T.); +#47976 = VERTEX_POINT('',#47977); +#47977 = CARTESIAN_POINT('',(2.674938966801,2.97,0.)); +#47978 = CIRCLE('',#47979,0.3); +#47979 = AXIS2_PLACEMENT_3D('',#47980,#47981,#47982); +#47980 = CARTESIAN_POINT('',(2.674938966801,2.97,0.3)); +#47981 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47982 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#47983 = ORIENTED_EDGE('',*,*,#47984,.T.); +#47984 = EDGE_CURVE('',#47976,#47985,#47987,.T.); +#47985 = VERTEX_POINT('',#47986); +#47986 = CARTESIAN_POINT('',(3.,2.97,0.)); +#47987 = LINE('',#47988,#47989); +#47988 = CARTESIAN_POINT('',(2.674938966801,2.97,0.)); +#47989 = VECTOR('',#47990,1.); +#47990 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#47991 = ORIENTED_EDGE('',*,*,#47992,.T.); +#47992 = EDGE_CURVE('',#47985,#47993,#47995,.T.); +#47993 = VERTEX_POINT('',#47994); +#47994 = CARTESIAN_POINT('',(3.,2.97,0.2)); +#47995 = LINE('',#47996,#47997); +#47996 = CARTESIAN_POINT('',(3.,2.97,0.)); +#47997 = VECTOR('',#47998,1.); +#47998 = DIRECTION('',(0.,0.,1.)); +#47999 = ORIENTED_EDGE('',*,*,#48000,.T.); +#48000 = EDGE_CURVE('',#47993,#48001,#48003,.T.); +#48001 = VERTEX_POINT('',#48002); +#48002 = CARTESIAN_POINT('',(2.674938966801,2.97,0.2)); +#48003 = LINE('',#48004,#48005); +#48004 = CARTESIAN_POINT('',(3.,2.97,0.2)); +#48005 = VECTOR('',#48006,1.); +#48006 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48007 = ORIENTED_EDGE('',*,*,#48008,.T.); +#48008 = EDGE_CURVE('',#48001,#48009,#48011,.T.); +#48009 = VERTEX_POINT('',#48010); +#48010 = CARTESIAN_POINT('',(2.5764581915,2.97,0.282635182233)); +#48011 = CIRCLE('',#48012,0.1); +#48012 = AXIS2_PLACEMENT_3D('',#48013,#48014,#48015); +#48013 = CARTESIAN_POINT('',(2.674938966801,2.97,0.3)); +#48014 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48015 = DIRECTION('',(0.,0.,-1.)); +#48016 = ORIENTED_EDGE('',*,*,#48017,.T.); +#48017 = EDGE_CURVE('',#48009,#48018,#48020,.T.); +#48018 = VERTEX_POINT('',#48019); +#48019 = CARTESIAN_POINT('',(2.495442325904,2.97,0.7770944533)); +#48020 = LINE('',#48021,#48022); +#48021 = CARTESIAN_POINT('',(2.5764581915,2.97,0.282635182233)); +#48022 = VECTOR('',#48023,1.); +#48023 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48024 = ORIENTED_EDGE('',*,*,#48025,.T.); +#48025 = EDGE_CURVE('',#48018,#48026,#48028,.T.); +#48026 = VERTEX_POINT('',#48027); +#48027 = CARTESIAN_POINT('',(2.2,2.97,1.025)); +#48028 = CIRCLE('',#48029,0.3); +#48029 = AXIS2_PLACEMENT_3D('',#48030,#48031,#48032); +#48030 = CARTESIAN_POINT('',(2.2,2.97,0.725)); +#48031 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48032 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48033 = ORIENTED_EDGE('',*,*,#48034,.T.); +#48034 = EDGE_CURVE('',#48026,#44934,#48035,.T.); +#48035 = LINE('',#48036,#48037); +#48036 = CARTESIAN_POINT('',(2.2,2.97,1.025)); +#48037 = VECTOR('',#48038,1.); +#48038 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48039 = PLANE('',#48040); +#48040 = AXIS2_PLACEMENT_3D('',#48041,#48042,#48043); +#48041 = CARTESIAN_POINT('',(2.410970442936,2.97,0.528115505988)); +#48042 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48043 = DIRECTION('',(0.,0.,1.)); +#48044 = ADVANCED_FACE('',(#48045),#48061,.F.); +#48045 = FACE_BOUND('',#48046,.F.); +#48046 = EDGE_LOOP('',(#48047,#48053,#48054,#48060)); +#48047 = ORIENTED_EDGE('',*,*,#48048,.F.); +#48048 = EDGE_CURVE('',#44934,#45680,#48049,.T.); +#48049 = LINE('',#48050,#48051); +#48050 = CARTESIAN_POINT('',(2.2,2.97,1.025)); +#48051 = VECTOR('',#48052,1.); +#48052 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48053 = ORIENTED_EDGE('',*,*,#44950,.T.); +#48054 = ORIENTED_EDGE('',*,*,#48055,.T.); +#48055 = EDGE_CURVE('',#44943,#45688,#48056,.T.); +#48056 = LINE('',#48057,#48058); +#48057 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#48058 = VECTOR('',#48059,1.); +#48059 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48060 = ORIENTED_EDGE('',*,*,#45687,.F.); +#48061 = PLANE('',#48062); +#48062 = AXIS2_PLACEMENT_3D('',#48063,#48064,#48065); +#48063 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48064 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48065 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48066 = ADVANCED_FACE('',(#48067),#48153,.F.); +#48067 = FACE_BOUND('',#48068,.F.); +#48068 = EDGE_LOOP('',(#48069,#48070,#48071,#48080,#48088,#48097,#48105, + #48113,#48121,#48130,#48138,#48147)); +#48069 = ORIENTED_EDGE('',*,*,#44942,.F.); +#48070 = ORIENTED_EDGE('',*,*,#44964,.T.); +#48071 = ORIENTED_EDGE('',*,*,#48072,.T.); +#48072 = EDGE_CURVE('',#44965,#48073,#48075,.T.); +#48073 = VERTEX_POINT('',#48074); +#48074 = CARTESIAN_POINT('',(2.298480775301,2.11,0.742364817767)); +#48075 = CIRCLE('',#48076,0.1); +#48076 = AXIS2_PLACEMENT_3D('',#48077,#48078,#48079); +#48077 = CARTESIAN_POINT('',(2.2,2.11,0.725)); +#48078 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48079 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48080 = ORIENTED_EDGE('',*,*,#48081,.T.); +#48081 = EDGE_CURVE('',#48073,#48082,#48084,.T.); +#48082 = VERTEX_POINT('',#48083); +#48083 = CARTESIAN_POINT('',(2.379496640897,2.11,0.2479055467)); +#48084 = LINE('',#48085,#48086); +#48085 = CARTESIAN_POINT('',(2.298480775301,2.11,0.742364817767)); +#48086 = VECTOR('',#48087,1.); +#48087 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48088 = ORIENTED_EDGE('',*,*,#48089,.T.); +#48089 = EDGE_CURVE('',#48082,#48090,#48092,.T.); +#48090 = VERTEX_POINT('',#48091); +#48091 = CARTESIAN_POINT('',(2.674938966801,2.11,0.)); +#48092 = CIRCLE('',#48093,0.3); +#48093 = AXIS2_PLACEMENT_3D('',#48094,#48095,#48096); +#48094 = CARTESIAN_POINT('',(2.674938966801,2.11,0.3)); +#48095 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48096 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48097 = ORIENTED_EDGE('',*,*,#48098,.T.); +#48098 = EDGE_CURVE('',#48090,#48099,#48101,.T.); +#48099 = VERTEX_POINT('',#48100); +#48100 = CARTESIAN_POINT('',(3.,2.11,0.)); +#48101 = LINE('',#48102,#48103); +#48102 = CARTESIAN_POINT('',(2.674938966801,2.11,0.)); +#48103 = VECTOR('',#48104,1.); +#48104 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48105 = ORIENTED_EDGE('',*,*,#48106,.T.); +#48106 = EDGE_CURVE('',#48099,#48107,#48109,.T.); +#48107 = VERTEX_POINT('',#48108); +#48108 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#48109 = LINE('',#48110,#48111); +#48110 = CARTESIAN_POINT('',(3.,2.11,0.)); +#48111 = VECTOR('',#48112,1.); +#48112 = DIRECTION('',(0.,0.,1.)); +#48113 = ORIENTED_EDGE('',*,*,#48114,.T.); +#48114 = EDGE_CURVE('',#48107,#48115,#48117,.T.); +#48115 = VERTEX_POINT('',#48116); +#48116 = CARTESIAN_POINT('',(2.674938966801,2.11,0.2)); +#48117 = LINE('',#48118,#48119); +#48118 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#48119 = VECTOR('',#48120,1.); +#48120 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48121 = ORIENTED_EDGE('',*,*,#48122,.T.); +#48122 = EDGE_CURVE('',#48115,#48123,#48125,.T.); +#48123 = VERTEX_POINT('',#48124); +#48124 = CARTESIAN_POINT('',(2.5764581915,2.11,0.282635182233)); +#48125 = CIRCLE('',#48126,0.1); +#48126 = AXIS2_PLACEMENT_3D('',#48127,#48128,#48129); +#48127 = CARTESIAN_POINT('',(2.674938966801,2.11,0.3)); +#48128 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48129 = DIRECTION('',(0.,0.,-1.)); +#48130 = ORIENTED_EDGE('',*,*,#48131,.T.); +#48131 = EDGE_CURVE('',#48123,#48132,#48134,.T.); +#48132 = VERTEX_POINT('',#48133); +#48133 = CARTESIAN_POINT('',(2.495442325904,2.11,0.7770944533)); +#48134 = LINE('',#48135,#48136); +#48135 = CARTESIAN_POINT('',(2.5764581915,2.11,0.282635182233)); +#48136 = VECTOR('',#48137,1.); +#48137 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48138 = ORIENTED_EDGE('',*,*,#48139,.T.); +#48139 = EDGE_CURVE('',#48132,#48140,#48142,.T.); +#48140 = VERTEX_POINT('',#48141); +#48141 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#48142 = CIRCLE('',#48143,0.3); +#48143 = AXIS2_PLACEMENT_3D('',#48144,#48145,#48146); +#48144 = CARTESIAN_POINT('',(2.2,2.11,0.725)); +#48145 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48146 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48147 = ORIENTED_EDGE('',*,*,#48148,.T.); +#48148 = EDGE_CURVE('',#48140,#44943,#48149,.T.); +#48149 = LINE('',#48150,#48151); +#48150 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#48151 = VECTOR('',#48152,1.); +#48152 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48153 = PLANE('',#48154); +#48154 = AXIS2_PLACEMENT_3D('',#48155,#48156,#48157); +#48155 = CARTESIAN_POINT('',(2.410970442936,2.11,0.528115505988)); +#48156 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48157 = DIRECTION('',(0.,0.,1.)); +#48158 = ADVANCED_FACE('',(#48159),#48178,.F.); +#48159 = FACE_BOUND('',#48160,.F.); +#48160 = EDGE_LOOP('',(#48161,#48162,#48171,#48177)); +#48161 = ORIENTED_EDGE('',*,*,#44981,.T.); +#48162 = ORIENTED_EDGE('',*,*,#48163,.T.); +#48163 = EDGE_CURVE('',#44974,#48164,#48166,.T.); +#48164 = VERTEX_POINT('',#48165); +#48165 = CARTESIAN_POINT('',(2.298480775301,1.7,0.742364817767)); +#48166 = CIRCLE('',#48167,0.1); +#48167 = AXIS2_PLACEMENT_3D('',#48168,#48169,#48170); +#48168 = CARTESIAN_POINT('',(2.2,1.7,0.725)); +#48169 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48170 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48171 = ORIENTED_EDGE('',*,*,#48172,.F.); +#48172 = EDGE_CURVE('',#48073,#48164,#48173,.T.); +#48173 = LINE('',#48174,#48175); +#48174 = CARTESIAN_POINT('',(2.298480775301,2.11,0.742364817767)); +#48175 = VECTOR('',#48176,1.); +#48176 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48177 = ORIENTED_EDGE('',*,*,#48072,.F.); +#48178 = CYLINDRICAL_SURFACE('',#48179,0.1); +#48179 = AXIS2_PLACEMENT_3D('',#48180,#48181,#48182); +#48180 = CARTESIAN_POINT('',(2.2,2.11,0.725)); +#48181 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48182 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48183 = ADVANCED_FACE('',(#48184),#48262,.T.); +#48184 = FACE_BOUND('',#48185,.T.); +#48185 = EDGE_LOOP('',(#48186,#48187,#48188,#48189,#48197,#48206,#48214, + #48222,#48230,#48239,#48247,#48256)); +#48186 = ORIENTED_EDGE('',*,*,#44995,.F.); +#48187 = ORIENTED_EDGE('',*,*,#44973,.T.); +#48188 = ORIENTED_EDGE('',*,*,#48163,.T.); +#48189 = ORIENTED_EDGE('',*,*,#48190,.T.); +#48190 = EDGE_CURVE('',#48164,#48191,#48193,.T.); +#48191 = VERTEX_POINT('',#48192); +#48192 = CARTESIAN_POINT('',(2.379496640897,1.7,0.2479055467)); +#48193 = LINE('',#48194,#48195); +#48194 = CARTESIAN_POINT('',(2.298480775301,1.7,0.742364817767)); +#48195 = VECTOR('',#48196,1.); +#48196 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48197 = ORIENTED_EDGE('',*,*,#48198,.T.); +#48198 = EDGE_CURVE('',#48191,#48199,#48201,.T.); +#48199 = VERTEX_POINT('',#48200); +#48200 = CARTESIAN_POINT('',(2.674938966801,1.7,0.)); +#48201 = CIRCLE('',#48202,0.3); +#48202 = AXIS2_PLACEMENT_3D('',#48203,#48204,#48205); +#48203 = CARTESIAN_POINT('',(2.674938966801,1.7,0.3)); +#48204 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48205 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48206 = ORIENTED_EDGE('',*,*,#48207,.T.); +#48207 = EDGE_CURVE('',#48199,#48208,#48210,.T.); +#48208 = VERTEX_POINT('',#48209); +#48209 = CARTESIAN_POINT('',(3.,1.7,0.)); +#48210 = LINE('',#48211,#48212); +#48211 = CARTESIAN_POINT('',(2.674938966801,1.7,0.)); +#48212 = VECTOR('',#48213,1.); +#48213 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48214 = ORIENTED_EDGE('',*,*,#48215,.T.); +#48215 = EDGE_CURVE('',#48208,#48216,#48218,.T.); +#48216 = VERTEX_POINT('',#48217); +#48217 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#48218 = LINE('',#48219,#48220); +#48219 = CARTESIAN_POINT('',(3.,1.7,0.)); +#48220 = VECTOR('',#48221,1.); +#48221 = DIRECTION('',(0.,0.,1.)); +#48222 = ORIENTED_EDGE('',*,*,#48223,.T.); +#48223 = EDGE_CURVE('',#48216,#48224,#48226,.T.); +#48224 = VERTEX_POINT('',#48225); +#48225 = CARTESIAN_POINT('',(2.674938966801,1.7,0.2)); +#48226 = LINE('',#48227,#48228); +#48227 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#48228 = VECTOR('',#48229,1.); +#48229 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48230 = ORIENTED_EDGE('',*,*,#48231,.T.); +#48231 = EDGE_CURVE('',#48224,#48232,#48234,.T.); +#48232 = VERTEX_POINT('',#48233); +#48233 = CARTESIAN_POINT('',(2.5764581915,1.7,0.282635182233)); +#48234 = CIRCLE('',#48235,0.1); +#48235 = AXIS2_PLACEMENT_3D('',#48236,#48237,#48238); +#48236 = CARTESIAN_POINT('',(2.674938966801,1.7,0.3)); +#48237 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48238 = DIRECTION('',(0.,0.,-1.)); +#48239 = ORIENTED_EDGE('',*,*,#48240,.T.); +#48240 = EDGE_CURVE('',#48232,#48241,#48243,.T.); +#48241 = VERTEX_POINT('',#48242); +#48242 = CARTESIAN_POINT('',(2.495442325904,1.7,0.7770944533)); +#48243 = LINE('',#48244,#48245); +#48244 = CARTESIAN_POINT('',(2.5764581915,1.7,0.282635182233)); +#48245 = VECTOR('',#48246,1.); +#48246 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48247 = ORIENTED_EDGE('',*,*,#48248,.T.); +#48248 = EDGE_CURVE('',#48241,#48249,#48251,.T.); +#48249 = VERTEX_POINT('',#48250); +#48250 = CARTESIAN_POINT('',(2.2,1.7,1.025)); +#48251 = CIRCLE('',#48252,0.3); +#48252 = AXIS2_PLACEMENT_3D('',#48253,#48254,#48255); +#48253 = CARTESIAN_POINT('',(2.2,1.7,0.725)); +#48254 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48255 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48256 = ORIENTED_EDGE('',*,*,#48257,.T.); +#48257 = EDGE_CURVE('',#48249,#44996,#48258,.T.); +#48258 = LINE('',#48259,#48260); +#48259 = CARTESIAN_POINT('',(2.2,1.7,1.025)); +#48260 = VECTOR('',#48261,1.); +#48261 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48262 = PLANE('',#48263); +#48263 = AXIS2_PLACEMENT_3D('',#48264,#48265,#48266); +#48264 = CARTESIAN_POINT('',(2.410970442936,1.7,0.528115505988)); +#48265 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48266 = DIRECTION('',(0.,0.,1.)); +#48267 = ADVANCED_FACE('',(#48268),#48284,.F.); +#48268 = FACE_BOUND('',#48269,.F.); +#48269 = EDGE_LOOP('',(#48270,#48276,#48277,#48283)); +#48270 = ORIENTED_EDGE('',*,*,#48271,.F.); +#48271 = EDGE_CURVE('',#44996,#45696,#48272,.T.); +#48272 = LINE('',#48273,#48274); +#48273 = CARTESIAN_POINT('',(2.2,1.7,1.025)); +#48274 = VECTOR('',#48275,1.); +#48275 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48276 = ORIENTED_EDGE('',*,*,#45012,.T.); +#48277 = ORIENTED_EDGE('',*,*,#48278,.T.); +#48278 = EDGE_CURVE('',#45005,#45704,#48279,.T.); +#48279 = LINE('',#48280,#48281); +#48280 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#48281 = VECTOR('',#48282,1.); +#48282 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48283 = ORIENTED_EDGE('',*,*,#45703,.F.); +#48284 = PLANE('',#48285); +#48285 = AXIS2_PLACEMENT_3D('',#48286,#48287,#48288); +#48286 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48287 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48288 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48289 = ADVANCED_FACE('',(#48290),#48376,.F.); +#48290 = FACE_BOUND('',#48291,.F.); +#48291 = EDGE_LOOP('',(#48292,#48293,#48294,#48303,#48311,#48320,#48328, + #48336,#48344,#48353,#48361,#48370)); +#48292 = ORIENTED_EDGE('',*,*,#45004,.F.); +#48293 = ORIENTED_EDGE('',*,*,#45026,.T.); +#48294 = ORIENTED_EDGE('',*,*,#48295,.T.); +#48295 = EDGE_CURVE('',#45027,#48296,#48298,.T.); +#48296 = VERTEX_POINT('',#48297); +#48297 = CARTESIAN_POINT('',(2.298480775301,0.84,0.742364817767)); +#48298 = CIRCLE('',#48299,0.1); +#48299 = AXIS2_PLACEMENT_3D('',#48300,#48301,#48302); +#48300 = CARTESIAN_POINT('',(2.2,0.84,0.725)); +#48301 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48302 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48303 = ORIENTED_EDGE('',*,*,#48304,.T.); +#48304 = EDGE_CURVE('',#48296,#48305,#48307,.T.); +#48305 = VERTEX_POINT('',#48306); +#48306 = CARTESIAN_POINT('',(2.379496640897,0.84,0.2479055467)); +#48307 = LINE('',#48308,#48309); +#48308 = CARTESIAN_POINT('',(2.298480775301,0.84,0.742364817767)); +#48309 = VECTOR('',#48310,1.); +#48310 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48311 = ORIENTED_EDGE('',*,*,#48312,.T.); +#48312 = EDGE_CURVE('',#48305,#48313,#48315,.T.); +#48313 = VERTEX_POINT('',#48314); +#48314 = CARTESIAN_POINT('',(2.674938966801,0.84,0.)); +#48315 = CIRCLE('',#48316,0.3); +#48316 = AXIS2_PLACEMENT_3D('',#48317,#48318,#48319); +#48317 = CARTESIAN_POINT('',(2.674938966801,0.84,0.3)); +#48318 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48319 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48320 = ORIENTED_EDGE('',*,*,#48321,.T.); +#48321 = EDGE_CURVE('',#48313,#48322,#48324,.T.); +#48322 = VERTEX_POINT('',#48323); +#48323 = CARTESIAN_POINT('',(3.,0.84,0.)); +#48324 = LINE('',#48325,#48326); +#48325 = CARTESIAN_POINT('',(2.674938966801,0.84,0.)); +#48326 = VECTOR('',#48327,1.); +#48327 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48328 = ORIENTED_EDGE('',*,*,#48329,.T.); +#48329 = EDGE_CURVE('',#48322,#48330,#48332,.T.); +#48330 = VERTEX_POINT('',#48331); +#48331 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#48332 = LINE('',#48333,#48334); +#48333 = CARTESIAN_POINT('',(3.,0.84,0.)); +#48334 = VECTOR('',#48335,1.); +#48335 = DIRECTION('',(0.,0.,1.)); +#48336 = ORIENTED_EDGE('',*,*,#48337,.T.); +#48337 = EDGE_CURVE('',#48330,#48338,#48340,.T.); +#48338 = VERTEX_POINT('',#48339); +#48339 = CARTESIAN_POINT('',(2.674938966801,0.84,0.2)); +#48340 = LINE('',#48341,#48342); +#48341 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#48342 = VECTOR('',#48343,1.); +#48343 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48344 = ORIENTED_EDGE('',*,*,#48345,.T.); +#48345 = EDGE_CURVE('',#48338,#48346,#48348,.T.); +#48346 = VERTEX_POINT('',#48347); +#48347 = CARTESIAN_POINT('',(2.5764581915,0.84,0.282635182233)); +#48348 = CIRCLE('',#48349,0.1); +#48349 = AXIS2_PLACEMENT_3D('',#48350,#48351,#48352); +#48350 = CARTESIAN_POINT('',(2.674938966801,0.84,0.3)); +#48351 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48352 = DIRECTION('',(0.,0.,-1.)); +#48353 = ORIENTED_EDGE('',*,*,#48354,.T.); +#48354 = EDGE_CURVE('',#48346,#48355,#48357,.T.); +#48355 = VERTEX_POINT('',#48356); +#48356 = CARTESIAN_POINT('',(2.495442325904,0.84,0.7770944533)); +#48357 = LINE('',#48358,#48359); +#48358 = CARTESIAN_POINT('',(2.5764581915,0.84,0.282635182233)); +#48359 = VECTOR('',#48360,1.); +#48360 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48361 = ORIENTED_EDGE('',*,*,#48362,.T.); +#48362 = EDGE_CURVE('',#48355,#48363,#48365,.T.); +#48363 = VERTEX_POINT('',#48364); +#48364 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#48365 = CIRCLE('',#48366,0.3); +#48366 = AXIS2_PLACEMENT_3D('',#48367,#48368,#48369); +#48367 = CARTESIAN_POINT('',(2.2,0.84,0.725)); +#48368 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48369 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48370 = ORIENTED_EDGE('',*,*,#48371,.T.); +#48371 = EDGE_CURVE('',#48363,#45005,#48372,.T.); +#48372 = LINE('',#48373,#48374); +#48373 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#48374 = VECTOR('',#48375,1.); +#48375 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48376 = PLANE('',#48377); +#48377 = AXIS2_PLACEMENT_3D('',#48378,#48379,#48380); +#48378 = CARTESIAN_POINT('',(2.410970442936,0.84,0.528115505988)); +#48379 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48380 = DIRECTION('',(0.,0.,1.)); +#48381 = ADVANCED_FACE('',(#48382),#48401,.F.); +#48382 = FACE_BOUND('',#48383,.F.); +#48383 = EDGE_LOOP('',(#48384,#48385,#48394,#48400)); +#48384 = ORIENTED_EDGE('',*,*,#45043,.T.); +#48385 = ORIENTED_EDGE('',*,*,#48386,.T.); +#48386 = EDGE_CURVE('',#45036,#48387,#48389,.T.); +#48387 = VERTEX_POINT('',#48388); +#48388 = CARTESIAN_POINT('',(2.298480775301,0.43,0.742364817767)); +#48389 = CIRCLE('',#48390,0.1); +#48390 = AXIS2_PLACEMENT_3D('',#48391,#48392,#48393); +#48391 = CARTESIAN_POINT('',(2.2,0.43,0.725)); +#48392 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48393 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48394 = ORIENTED_EDGE('',*,*,#48395,.F.); +#48395 = EDGE_CURVE('',#48296,#48387,#48396,.T.); +#48396 = LINE('',#48397,#48398); +#48397 = CARTESIAN_POINT('',(2.298480775301,0.84,0.742364817767)); +#48398 = VECTOR('',#48399,1.); +#48399 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48400 = ORIENTED_EDGE('',*,*,#48295,.F.); +#48401 = CYLINDRICAL_SURFACE('',#48402,0.1); +#48402 = AXIS2_PLACEMENT_3D('',#48403,#48404,#48405); +#48403 = CARTESIAN_POINT('',(2.2,0.84,0.725)); +#48404 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48405 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48406 = ADVANCED_FACE('',(#48407),#48485,.T.); +#48407 = FACE_BOUND('',#48408,.T.); +#48408 = EDGE_LOOP('',(#48409,#48410,#48411,#48412,#48420,#48429,#48437, + #48445,#48453,#48462,#48470,#48479)); +#48409 = ORIENTED_EDGE('',*,*,#45057,.F.); +#48410 = ORIENTED_EDGE('',*,*,#45035,.T.); +#48411 = ORIENTED_EDGE('',*,*,#48386,.T.); +#48412 = ORIENTED_EDGE('',*,*,#48413,.T.); +#48413 = EDGE_CURVE('',#48387,#48414,#48416,.T.); +#48414 = VERTEX_POINT('',#48415); +#48415 = CARTESIAN_POINT('',(2.379496640897,0.43,0.2479055467)); +#48416 = LINE('',#48417,#48418); +#48417 = CARTESIAN_POINT('',(2.298480775301,0.43,0.742364817767)); +#48418 = VECTOR('',#48419,1.); +#48419 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48420 = ORIENTED_EDGE('',*,*,#48421,.T.); +#48421 = EDGE_CURVE('',#48414,#48422,#48424,.T.); +#48422 = VERTEX_POINT('',#48423); +#48423 = CARTESIAN_POINT('',(2.674938966801,0.43,0.)); +#48424 = CIRCLE('',#48425,0.3); +#48425 = AXIS2_PLACEMENT_3D('',#48426,#48427,#48428); +#48426 = CARTESIAN_POINT('',(2.674938966801,0.43,0.3)); +#48427 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48428 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48429 = ORIENTED_EDGE('',*,*,#48430,.T.); +#48430 = EDGE_CURVE('',#48422,#48431,#48433,.T.); +#48431 = VERTEX_POINT('',#48432); +#48432 = CARTESIAN_POINT('',(3.,0.43,0.)); +#48433 = LINE('',#48434,#48435); +#48434 = CARTESIAN_POINT('',(2.674938966801,0.43,0.)); +#48435 = VECTOR('',#48436,1.); +#48436 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48437 = ORIENTED_EDGE('',*,*,#48438,.T.); +#48438 = EDGE_CURVE('',#48431,#48439,#48441,.T.); +#48439 = VERTEX_POINT('',#48440); +#48440 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#48441 = LINE('',#48442,#48443); +#48442 = CARTESIAN_POINT('',(3.,0.43,0.)); +#48443 = VECTOR('',#48444,1.); +#48444 = DIRECTION('',(0.,0.,1.)); +#48445 = ORIENTED_EDGE('',*,*,#48446,.T.); +#48446 = EDGE_CURVE('',#48439,#48447,#48449,.T.); +#48447 = VERTEX_POINT('',#48448); +#48448 = CARTESIAN_POINT('',(2.674938966801,0.43,0.2)); +#48449 = LINE('',#48450,#48451); +#48450 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#48451 = VECTOR('',#48452,1.); +#48452 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48453 = ORIENTED_EDGE('',*,*,#48454,.T.); +#48454 = EDGE_CURVE('',#48447,#48455,#48457,.T.); +#48455 = VERTEX_POINT('',#48456); +#48456 = CARTESIAN_POINT('',(2.5764581915,0.43,0.282635182233)); +#48457 = CIRCLE('',#48458,0.1); +#48458 = AXIS2_PLACEMENT_3D('',#48459,#48460,#48461); +#48459 = CARTESIAN_POINT('',(2.674938966801,0.43,0.3)); +#48460 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48461 = DIRECTION('',(0.,0.,-1.)); +#48462 = ORIENTED_EDGE('',*,*,#48463,.T.); +#48463 = EDGE_CURVE('',#48455,#48464,#48466,.T.); +#48464 = VERTEX_POINT('',#48465); +#48465 = CARTESIAN_POINT('',(2.495442325904,0.43,0.7770944533)); +#48466 = LINE('',#48467,#48468); +#48467 = CARTESIAN_POINT('',(2.5764581915,0.43,0.282635182233)); +#48468 = VECTOR('',#48469,1.); +#48469 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48470 = ORIENTED_EDGE('',*,*,#48471,.T.); +#48471 = EDGE_CURVE('',#48464,#48472,#48474,.T.); +#48472 = VERTEX_POINT('',#48473); +#48473 = CARTESIAN_POINT('',(2.2,0.43,1.025)); +#48474 = CIRCLE('',#48475,0.3); +#48475 = AXIS2_PLACEMENT_3D('',#48476,#48477,#48478); +#48476 = CARTESIAN_POINT('',(2.2,0.43,0.725)); +#48477 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48478 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48479 = ORIENTED_EDGE('',*,*,#48480,.T.); +#48480 = EDGE_CURVE('',#48472,#45058,#48481,.T.); +#48481 = LINE('',#48482,#48483); +#48482 = CARTESIAN_POINT('',(2.2,0.43,1.025)); +#48483 = VECTOR('',#48484,1.); +#48484 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48485 = PLANE('',#48486); +#48486 = AXIS2_PLACEMENT_3D('',#48487,#48488,#48489); +#48487 = CARTESIAN_POINT('',(2.410970442936,0.43,0.528115505988)); +#48488 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48489 = DIRECTION('',(0.,0.,1.)); +#48490 = ADVANCED_FACE('',(#48491),#48507,.F.); +#48491 = FACE_BOUND('',#48492,.F.); +#48492 = EDGE_LOOP('',(#48493,#48499,#48500,#48506)); +#48493 = ORIENTED_EDGE('',*,*,#48494,.F.); +#48494 = EDGE_CURVE('',#45058,#45712,#48495,.T.); +#48495 = LINE('',#48496,#48497); +#48496 = CARTESIAN_POINT('',(2.2,0.43,1.025)); +#48497 = VECTOR('',#48498,1.); +#48498 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48499 = ORIENTED_EDGE('',*,*,#45074,.T.); +#48500 = ORIENTED_EDGE('',*,*,#48501,.T.); +#48501 = EDGE_CURVE('',#45067,#45720,#48502,.T.); +#48502 = LINE('',#48503,#48504); +#48503 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#48504 = VECTOR('',#48505,1.); +#48505 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48506 = ORIENTED_EDGE('',*,*,#45719,.F.); +#48507 = PLANE('',#48508); +#48508 = AXIS2_PLACEMENT_3D('',#48509,#48510,#48511); +#48509 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48510 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48511 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48512 = ADVANCED_FACE('',(#48513),#48599,.F.); +#48513 = FACE_BOUND('',#48514,.F.); +#48514 = EDGE_LOOP('',(#48515,#48516,#48517,#48526,#48534,#48543,#48551, + #48559,#48567,#48576,#48584,#48593)); +#48515 = ORIENTED_EDGE('',*,*,#45066,.F.); +#48516 = ORIENTED_EDGE('',*,*,#45088,.T.); +#48517 = ORIENTED_EDGE('',*,*,#48518,.T.); +#48518 = EDGE_CURVE('',#45089,#48519,#48521,.T.); +#48519 = VERTEX_POINT('',#48520); +#48520 = CARTESIAN_POINT('',(2.298480775301,-0.43,0.742364817767)); +#48521 = CIRCLE('',#48522,0.1); +#48522 = AXIS2_PLACEMENT_3D('',#48523,#48524,#48525); +#48523 = CARTESIAN_POINT('',(2.2,-0.43,0.725)); +#48524 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48525 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48526 = ORIENTED_EDGE('',*,*,#48527,.T.); +#48527 = EDGE_CURVE('',#48519,#48528,#48530,.T.); +#48528 = VERTEX_POINT('',#48529); +#48529 = CARTESIAN_POINT('',(2.379496640897,-0.43,0.2479055467)); +#48530 = LINE('',#48531,#48532); +#48531 = CARTESIAN_POINT('',(2.298480775301,-0.43,0.742364817767)); +#48532 = VECTOR('',#48533,1.); +#48533 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48534 = ORIENTED_EDGE('',*,*,#48535,.T.); +#48535 = EDGE_CURVE('',#48528,#48536,#48538,.T.); +#48536 = VERTEX_POINT('',#48537); +#48537 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.)); +#48538 = CIRCLE('',#48539,0.3); +#48539 = AXIS2_PLACEMENT_3D('',#48540,#48541,#48542); +#48540 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.3)); +#48541 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48542 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48543 = ORIENTED_EDGE('',*,*,#48544,.T.); +#48544 = EDGE_CURVE('',#48536,#48545,#48547,.T.); +#48545 = VERTEX_POINT('',#48546); +#48546 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#48547 = LINE('',#48548,#48549); +#48548 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.)); +#48549 = VECTOR('',#48550,1.); +#48550 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48551 = ORIENTED_EDGE('',*,*,#48552,.T.); +#48552 = EDGE_CURVE('',#48545,#48553,#48555,.T.); +#48553 = VERTEX_POINT('',#48554); +#48554 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#48555 = LINE('',#48556,#48557); +#48556 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#48557 = VECTOR('',#48558,1.); +#48558 = DIRECTION('',(0.,0.,1.)); +#48559 = ORIENTED_EDGE('',*,*,#48560,.T.); +#48560 = EDGE_CURVE('',#48553,#48561,#48563,.T.); +#48561 = VERTEX_POINT('',#48562); +#48562 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.2)); +#48563 = LINE('',#48564,#48565); +#48564 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#48565 = VECTOR('',#48566,1.); +#48566 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48567 = ORIENTED_EDGE('',*,*,#48568,.T.); +#48568 = EDGE_CURVE('',#48561,#48569,#48571,.T.); +#48569 = VERTEX_POINT('',#48570); +#48570 = CARTESIAN_POINT('',(2.5764581915,-0.43,0.282635182233)); +#48571 = CIRCLE('',#48572,0.1); +#48572 = AXIS2_PLACEMENT_3D('',#48573,#48574,#48575); +#48573 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.3)); +#48574 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48575 = DIRECTION('',(0.,0.,-1.)); +#48576 = ORIENTED_EDGE('',*,*,#48577,.T.); +#48577 = EDGE_CURVE('',#48569,#48578,#48580,.T.); +#48578 = VERTEX_POINT('',#48579); +#48579 = CARTESIAN_POINT('',(2.495442325904,-0.43,0.7770944533)); +#48580 = LINE('',#48581,#48582); +#48581 = CARTESIAN_POINT('',(2.5764581915,-0.43,0.282635182233)); +#48582 = VECTOR('',#48583,1.); +#48583 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48584 = ORIENTED_EDGE('',*,*,#48585,.T.); +#48585 = EDGE_CURVE('',#48578,#48586,#48588,.T.); +#48586 = VERTEX_POINT('',#48587); +#48587 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#48588 = CIRCLE('',#48589,0.3); +#48589 = AXIS2_PLACEMENT_3D('',#48590,#48591,#48592); +#48590 = CARTESIAN_POINT('',(2.2,-0.43,0.725)); +#48591 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48592 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48593 = ORIENTED_EDGE('',*,*,#48594,.T.); +#48594 = EDGE_CURVE('',#48586,#45067,#48595,.T.); +#48595 = LINE('',#48596,#48597); +#48596 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#48597 = VECTOR('',#48598,1.); +#48598 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48599 = PLANE('',#48600); +#48600 = AXIS2_PLACEMENT_3D('',#48601,#48602,#48603); +#48601 = CARTESIAN_POINT('',(2.410970442936,-0.43,0.528115505988)); +#48602 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48603 = DIRECTION('',(0.,0.,1.)); +#48604 = ADVANCED_FACE('',(#48605),#48624,.F.); +#48605 = FACE_BOUND('',#48606,.F.); +#48606 = EDGE_LOOP('',(#48607,#48608,#48617,#48623)); +#48607 = ORIENTED_EDGE('',*,*,#45105,.T.); +#48608 = ORIENTED_EDGE('',*,*,#48609,.T.); +#48609 = EDGE_CURVE('',#45098,#48610,#48612,.T.); +#48610 = VERTEX_POINT('',#48611); +#48611 = CARTESIAN_POINT('',(2.298480775301,-0.84,0.742364817767)); +#48612 = CIRCLE('',#48613,0.1); +#48613 = AXIS2_PLACEMENT_3D('',#48614,#48615,#48616); +#48614 = CARTESIAN_POINT('',(2.2,-0.84,0.725)); +#48615 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48616 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48617 = ORIENTED_EDGE('',*,*,#48618,.F.); +#48618 = EDGE_CURVE('',#48519,#48610,#48619,.T.); +#48619 = LINE('',#48620,#48621); +#48620 = CARTESIAN_POINT('',(2.298480775301,-0.43,0.742364817767)); +#48621 = VECTOR('',#48622,1.); +#48622 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48623 = ORIENTED_EDGE('',*,*,#48518,.F.); +#48624 = CYLINDRICAL_SURFACE('',#48625,0.1); +#48625 = AXIS2_PLACEMENT_3D('',#48626,#48627,#48628); +#48626 = CARTESIAN_POINT('',(2.2,-0.43,0.725)); +#48627 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48628 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48629 = ADVANCED_FACE('',(#48630),#48708,.T.); +#48630 = FACE_BOUND('',#48631,.T.); +#48631 = EDGE_LOOP('',(#48632,#48633,#48634,#48635,#48643,#48652,#48660, + #48668,#48676,#48685,#48693,#48702)); +#48632 = ORIENTED_EDGE('',*,*,#45119,.F.); +#48633 = ORIENTED_EDGE('',*,*,#45097,.T.); +#48634 = ORIENTED_EDGE('',*,*,#48609,.T.); +#48635 = ORIENTED_EDGE('',*,*,#48636,.T.); +#48636 = EDGE_CURVE('',#48610,#48637,#48639,.T.); +#48637 = VERTEX_POINT('',#48638); +#48638 = CARTESIAN_POINT('',(2.379496640897,-0.84,0.2479055467)); +#48639 = LINE('',#48640,#48641); +#48640 = CARTESIAN_POINT('',(2.298480775301,-0.84,0.742364817767)); +#48641 = VECTOR('',#48642,1.); +#48642 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48643 = ORIENTED_EDGE('',*,*,#48644,.T.); +#48644 = EDGE_CURVE('',#48637,#48645,#48647,.T.); +#48645 = VERTEX_POINT('',#48646); +#48646 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.)); +#48647 = CIRCLE('',#48648,0.3); +#48648 = AXIS2_PLACEMENT_3D('',#48649,#48650,#48651); +#48649 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.3)); +#48650 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48651 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48652 = ORIENTED_EDGE('',*,*,#48653,.T.); +#48653 = EDGE_CURVE('',#48645,#48654,#48656,.T.); +#48654 = VERTEX_POINT('',#48655); +#48655 = CARTESIAN_POINT('',(3.,-0.84,0.)); +#48656 = LINE('',#48657,#48658); +#48657 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.)); +#48658 = VECTOR('',#48659,1.); +#48659 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48660 = ORIENTED_EDGE('',*,*,#48661,.T.); +#48661 = EDGE_CURVE('',#48654,#48662,#48664,.T.); +#48662 = VERTEX_POINT('',#48663); +#48663 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#48664 = LINE('',#48665,#48666); +#48665 = CARTESIAN_POINT('',(3.,-0.84,0.)); +#48666 = VECTOR('',#48667,1.); +#48667 = DIRECTION('',(0.,0.,1.)); +#48668 = ORIENTED_EDGE('',*,*,#48669,.T.); +#48669 = EDGE_CURVE('',#48662,#48670,#48672,.T.); +#48670 = VERTEX_POINT('',#48671); +#48671 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.2)); +#48672 = LINE('',#48673,#48674); +#48673 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#48674 = VECTOR('',#48675,1.); +#48675 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48676 = ORIENTED_EDGE('',*,*,#48677,.T.); +#48677 = EDGE_CURVE('',#48670,#48678,#48680,.T.); +#48678 = VERTEX_POINT('',#48679); +#48679 = CARTESIAN_POINT('',(2.5764581915,-0.84,0.282635182233)); +#48680 = CIRCLE('',#48681,0.1); +#48681 = AXIS2_PLACEMENT_3D('',#48682,#48683,#48684); +#48682 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.3)); +#48683 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48684 = DIRECTION('',(0.,0.,-1.)); +#48685 = ORIENTED_EDGE('',*,*,#48686,.T.); +#48686 = EDGE_CURVE('',#48678,#48687,#48689,.T.); +#48687 = VERTEX_POINT('',#48688); +#48688 = CARTESIAN_POINT('',(2.495442325904,-0.84,0.7770944533)); +#48689 = LINE('',#48690,#48691); +#48690 = CARTESIAN_POINT('',(2.5764581915,-0.84,0.282635182233)); +#48691 = VECTOR('',#48692,1.); +#48692 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48693 = ORIENTED_EDGE('',*,*,#48694,.T.); +#48694 = EDGE_CURVE('',#48687,#48695,#48697,.T.); +#48695 = VERTEX_POINT('',#48696); +#48696 = CARTESIAN_POINT('',(2.2,-0.84,1.025)); +#48697 = CIRCLE('',#48698,0.3); +#48698 = AXIS2_PLACEMENT_3D('',#48699,#48700,#48701); +#48699 = CARTESIAN_POINT('',(2.2,-0.84,0.725)); +#48700 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48701 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48702 = ORIENTED_EDGE('',*,*,#48703,.T.); +#48703 = EDGE_CURVE('',#48695,#45120,#48704,.T.); +#48704 = LINE('',#48705,#48706); +#48705 = CARTESIAN_POINT('',(2.2,-0.84,1.025)); +#48706 = VECTOR('',#48707,1.); +#48707 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48708 = PLANE('',#48709); +#48709 = AXIS2_PLACEMENT_3D('',#48710,#48711,#48712); +#48710 = CARTESIAN_POINT('',(2.410970442936,-0.84,0.528115505988)); +#48711 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48712 = DIRECTION('',(0.,0.,1.)); +#48713 = ADVANCED_FACE('',(#48714),#48730,.F.); +#48714 = FACE_BOUND('',#48715,.F.); +#48715 = EDGE_LOOP('',(#48716,#48722,#48723,#48729)); +#48716 = ORIENTED_EDGE('',*,*,#48717,.F.); +#48717 = EDGE_CURVE('',#45120,#45728,#48718,.T.); +#48718 = LINE('',#48719,#48720); +#48719 = CARTESIAN_POINT('',(2.2,-0.84,1.025)); +#48720 = VECTOR('',#48721,1.); +#48721 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48722 = ORIENTED_EDGE('',*,*,#45136,.T.); +#48723 = ORIENTED_EDGE('',*,*,#48724,.T.); +#48724 = EDGE_CURVE('',#45129,#45736,#48725,.T.); +#48725 = LINE('',#48726,#48727); +#48726 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#48727 = VECTOR('',#48728,1.); +#48728 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48729 = ORIENTED_EDGE('',*,*,#45735,.F.); +#48730 = PLANE('',#48731); +#48731 = AXIS2_PLACEMENT_3D('',#48732,#48733,#48734); +#48732 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48733 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48734 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48735 = ADVANCED_FACE('',(#48736),#48822,.F.); +#48736 = FACE_BOUND('',#48737,.F.); +#48737 = EDGE_LOOP('',(#48738,#48739,#48740,#48749,#48757,#48766,#48774, + #48782,#48790,#48799,#48807,#48816)); +#48738 = ORIENTED_EDGE('',*,*,#45128,.F.); +#48739 = ORIENTED_EDGE('',*,*,#45150,.T.); +#48740 = ORIENTED_EDGE('',*,*,#48741,.T.); +#48741 = EDGE_CURVE('',#45151,#48742,#48744,.T.); +#48742 = VERTEX_POINT('',#48743); +#48743 = CARTESIAN_POINT('',(2.298480775301,-1.7,0.742364817767)); +#48744 = CIRCLE('',#48745,0.1); +#48745 = AXIS2_PLACEMENT_3D('',#48746,#48747,#48748); +#48746 = CARTESIAN_POINT('',(2.2,-1.7,0.725)); +#48747 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48748 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48749 = ORIENTED_EDGE('',*,*,#48750,.T.); +#48750 = EDGE_CURVE('',#48742,#48751,#48753,.T.); +#48751 = VERTEX_POINT('',#48752); +#48752 = CARTESIAN_POINT('',(2.379496640897,-1.7,0.2479055467)); +#48753 = LINE('',#48754,#48755); +#48754 = CARTESIAN_POINT('',(2.298480775301,-1.7,0.742364817767)); +#48755 = VECTOR('',#48756,1.); +#48756 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48757 = ORIENTED_EDGE('',*,*,#48758,.T.); +#48758 = EDGE_CURVE('',#48751,#48759,#48761,.T.); +#48759 = VERTEX_POINT('',#48760); +#48760 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.)); +#48761 = CIRCLE('',#48762,0.3); +#48762 = AXIS2_PLACEMENT_3D('',#48763,#48764,#48765); +#48763 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.3)); +#48764 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48765 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48766 = ORIENTED_EDGE('',*,*,#48767,.T.); +#48767 = EDGE_CURVE('',#48759,#48768,#48770,.T.); +#48768 = VERTEX_POINT('',#48769); +#48769 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#48770 = LINE('',#48771,#48772); +#48771 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.)); +#48772 = VECTOR('',#48773,1.); +#48773 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48774 = ORIENTED_EDGE('',*,*,#48775,.T.); +#48775 = EDGE_CURVE('',#48768,#48776,#48778,.T.); +#48776 = VERTEX_POINT('',#48777); +#48777 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#48778 = LINE('',#48779,#48780); +#48779 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#48780 = VECTOR('',#48781,1.); +#48781 = DIRECTION('',(0.,0.,1.)); +#48782 = ORIENTED_EDGE('',*,*,#48783,.T.); +#48783 = EDGE_CURVE('',#48776,#48784,#48786,.T.); +#48784 = VERTEX_POINT('',#48785); +#48785 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.2)); +#48786 = LINE('',#48787,#48788); +#48787 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#48788 = VECTOR('',#48789,1.); +#48789 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48790 = ORIENTED_EDGE('',*,*,#48791,.T.); +#48791 = EDGE_CURVE('',#48784,#48792,#48794,.T.); +#48792 = VERTEX_POINT('',#48793); +#48793 = CARTESIAN_POINT('',(2.5764581915,-1.7,0.282635182233)); +#48794 = CIRCLE('',#48795,0.1); +#48795 = AXIS2_PLACEMENT_3D('',#48796,#48797,#48798); +#48796 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.3)); +#48797 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48798 = DIRECTION('',(0.,0.,-1.)); +#48799 = ORIENTED_EDGE('',*,*,#48800,.T.); +#48800 = EDGE_CURVE('',#48792,#48801,#48803,.T.); +#48801 = VERTEX_POINT('',#48802); +#48802 = CARTESIAN_POINT('',(2.495442325904,-1.7,0.7770944533)); +#48803 = LINE('',#48804,#48805); +#48804 = CARTESIAN_POINT('',(2.5764581915,-1.7,0.282635182233)); +#48805 = VECTOR('',#48806,1.); +#48806 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48807 = ORIENTED_EDGE('',*,*,#48808,.T.); +#48808 = EDGE_CURVE('',#48801,#48809,#48811,.T.); +#48809 = VERTEX_POINT('',#48810); +#48810 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#48811 = CIRCLE('',#48812,0.3); +#48812 = AXIS2_PLACEMENT_3D('',#48813,#48814,#48815); +#48813 = CARTESIAN_POINT('',(2.2,-1.7,0.725)); +#48814 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48815 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48816 = ORIENTED_EDGE('',*,*,#48817,.T.); +#48817 = EDGE_CURVE('',#48809,#45129,#48818,.T.); +#48818 = LINE('',#48819,#48820); +#48819 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#48820 = VECTOR('',#48821,1.); +#48821 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48822 = PLANE('',#48823); +#48823 = AXIS2_PLACEMENT_3D('',#48824,#48825,#48826); +#48824 = CARTESIAN_POINT('',(2.410970442936,-1.7,0.528115505988)); +#48825 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48826 = DIRECTION('',(0.,0.,1.)); +#48827 = ADVANCED_FACE('',(#48828),#48847,.F.); +#48828 = FACE_BOUND('',#48829,.F.); +#48829 = EDGE_LOOP('',(#48830,#48831,#48840,#48846)); +#48830 = ORIENTED_EDGE('',*,*,#45167,.T.); +#48831 = ORIENTED_EDGE('',*,*,#48832,.T.); +#48832 = EDGE_CURVE('',#45160,#48833,#48835,.T.); +#48833 = VERTEX_POINT('',#48834); +#48834 = CARTESIAN_POINT('',(2.298480775301,-2.11,0.742364817767)); +#48835 = CIRCLE('',#48836,0.1); +#48836 = AXIS2_PLACEMENT_3D('',#48837,#48838,#48839); +#48837 = CARTESIAN_POINT('',(2.2,-2.11,0.725)); +#48838 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48839 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48840 = ORIENTED_EDGE('',*,*,#48841,.F.); +#48841 = EDGE_CURVE('',#48742,#48833,#48842,.T.); +#48842 = LINE('',#48843,#48844); +#48843 = CARTESIAN_POINT('',(2.298480775301,-1.7,0.742364817767)); +#48844 = VECTOR('',#48845,1.); +#48845 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48846 = ORIENTED_EDGE('',*,*,#48741,.F.); +#48847 = CYLINDRICAL_SURFACE('',#48848,0.1); +#48848 = AXIS2_PLACEMENT_3D('',#48849,#48850,#48851); +#48849 = CARTESIAN_POINT('',(2.2,-1.7,0.725)); +#48850 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48851 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48852 = ADVANCED_FACE('',(#48853),#48931,.T.); +#48853 = FACE_BOUND('',#48854,.T.); +#48854 = EDGE_LOOP('',(#48855,#48856,#48857,#48858,#48866,#48875,#48883, + #48891,#48899,#48908,#48916,#48925)); +#48855 = ORIENTED_EDGE('',*,*,#45181,.F.); +#48856 = ORIENTED_EDGE('',*,*,#45159,.T.); +#48857 = ORIENTED_EDGE('',*,*,#48832,.T.); +#48858 = ORIENTED_EDGE('',*,*,#48859,.T.); +#48859 = EDGE_CURVE('',#48833,#48860,#48862,.T.); +#48860 = VERTEX_POINT('',#48861); +#48861 = CARTESIAN_POINT('',(2.379496640897,-2.11,0.2479055467)); +#48862 = LINE('',#48863,#48864); +#48863 = CARTESIAN_POINT('',(2.298480775301,-2.11,0.742364817767)); +#48864 = VECTOR('',#48865,1.); +#48865 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48866 = ORIENTED_EDGE('',*,*,#48867,.T.); +#48867 = EDGE_CURVE('',#48860,#48868,#48870,.T.); +#48868 = VERTEX_POINT('',#48869); +#48869 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.)); +#48870 = CIRCLE('',#48871,0.3); +#48871 = AXIS2_PLACEMENT_3D('',#48872,#48873,#48874); +#48872 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.3)); +#48873 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48874 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48875 = ORIENTED_EDGE('',*,*,#48876,.T.); +#48876 = EDGE_CURVE('',#48868,#48877,#48879,.T.); +#48877 = VERTEX_POINT('',#48878); +#48878 = CARTESIAN_POINT('',(3.,-2.11,0.)); +#48879 = LINE('',#48880,#48881); +#48880 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.)); +#48881 = VECTOR('',#48882,1.); +#48882 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48883 = ORIENTED_EDGE('',*,*,#48884,.T.); +#48884 = EDGE_CURVE('',#48877,#48885,#48887,.T.); +#48885 = VERTEX_POINT('',#48886); +#48886 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#48887 = LINE('',#48888,#48889); +#48888 = CARTESIAN_POINT('',(3.,-2.11,0.)); +#48889 = VECTOR('',#48890,1.); +#48890 = DIRECTION('',(0.,0.,1.)); +#48891 = ORIENTED_EDGE('',*,*,#48892,.T.); +#48892 = EDGE_CURVE('',#48885,#48893,#48895,.T.); +#48893 = VERTEX_POINT('',#48894); +#48894 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.2)); +#48895 = LINE('',#48896,#48897); +#48896 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#48897 = VECTOR('',#48898,1.); +#48898 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48899 = ORIENTED_EDGE('',*,*,#48900,.T.); +#48900 = EDGE_CURVE('',#48893,#48901,#48903,.T.); +#48901 = VERTEX_POINT('',#48902); +#48902 = CARTESIAN_POINT('',(2.5764581915,-2.11,0.282635182233)); +#48903 = CIRCLE('',#48904,0.1); +#48904 = AXIS2_PLACEMENT_3D('',#48905,#48906,#48907); +#48905 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.3)); +#48906 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48907 = DIRECTION('',(0.,0.,-1.)); +#48908 = ORIENTED_EDGE('',*,*,#48909,.T.); +#48909 = EDGE_CURVE('',#48901,#48910,#48912,.T.); +#48910 = VERTEX_POINT('',#48911); +#48911 = CARTESIAN_POINT('',(2.495442325904,-2.11,0.7770944533)); +#48912 = LINE('',#48913,#48914); +#48913 = CARTESIAN_POINT('',(2.5764581915,-2.11,0.282635182233)); +#48914 = VECTOR('',#48915,1.); +#48915 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#48916 = ORIENTED_EDGE('',*,*,#48917,.T.); +#48917 = EDGE_CURVE('',#48910,#48918,#48920,.T.); +#48918 = VERTEX_POINT('',#48919); +#48919 = CARTESIAN_POINT('',(2.2,-2.11,1.025)); +#48920 = CIRCLE('',#48921,0.3); +#48921 = AXIS2_PLACEMENT_3D('',#48922,#48923,#48924); +#48922 = CARTESIAN_POINT('',(2.2,-2.11,0.725)); +#48923 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48924 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#48925 = ORIENTED_EDGE('',*,*,#48926,.T.); +#48926 = EDGE_CURVE('',#48918,#45182,#48927,.T.); +#48927 = LINE('',#48928,#48929); +#48928 = CARTESIAN_POINT('',(2.2,-2.11,1.025)); +#48929 = VECTOR('',#48930,1.); +#48930 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48931 = PLANE('',#48932); +#48932 = AXIS2_PLACEMENT_3D('',#48933,#48934,#48935); +#48933 = CARTESIAN_POINT('',(2.410970442936,-2.11,0.528115505988)); +#48934 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48935 = DIRECTION('',(0.,0.,1.)); +#48936 = ADVANCED_FACE('',(#48937),#48953,.F.); +#48937 = FACE_BOUND('',#48938,.F.); +#48938 = EDGE_LOOP('',(#48939,#48945,#48946,#48952)); +#48939 = ORIENTED_EDGE('',*,*,#48940,.F.); +#48940 = EDGE_CURVE('',#45182,#45744,#48941,.T.); +#48941 = LINE('',#48942,#48943); +#48942 = CARTESIAN_POINT('',(2.2,-2.11,1.025)); +#48943 = VECTOR('',#48944,1.); +#48944 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48945 = ORIENTED_EDGE('',*,*,#45198,.T.); +#48946 = ORIENTED_EDGE('',*,*,#48947,.T.); +#48947 = EDGE_CURVE('',#45191,#45752,#48948,.T.); +#48948 = LINE('',#48949,#48950); +#48949 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#48950 = VECTOR('',#48951,1.); +#48951 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#48952 = ORIENTED_EDGE('',*,*,#45751,.F.); +#48953 = PLANE('',#48954); +#48954 = AXIS2_PLACEMENT_3D('',#48955,#48956,#48957); +#48955 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48956 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48957 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48958 = ADVANCED_FACE('',(#48959),#49045,.F.); +#48959 = FACE_BOUND('',#48960,.F.); +#48960 = EDGE_LOOP('',(#48961,#48962,#48963,#48972,#48980,#48989,#48997, + #49005,#49013,#49022,#49030,#49039)); +#48961 = ORIENTED_EDGE('',*,*,#45190,.F.); +#48962 = ORIENTED_EDGE('',*,*,#45212,.T.); +#48963 = ORIENTED_EDGE('',*,*,#48964,.T.); +#48964 = EDGE_CURVE('',#45213,#48965,#48967,.T.); +#48965 = VERTEX_POINT('',#48966); +#48966 = CARTESIAN_POINT('',(2.298480775301,-2.97,0.742364817767)); +#48967 = CIRCLE('',#48968,0.1); +#48968 = AXIS2_PLACEMENT_3D('',#48969,#48970,#48971); +#48969 = CARTESIAN_POINT('',(2.2,-2.97,0.725)); +#48970 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#48971 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#48972 = ORIENTED_EDGE('',*,*,#48973,.T.); +#48973 = EDGE_CURVE('',#48965,#48974,#48976,.T.); +#48974 = VERTEX_POINT('',#48975); +#48975 = CARTESIAN_POINT('',(2.379496640897,-2.97,0.2479055467)); +#48976 = LINE('',#48977,#48978); +#48977 = CARTESIAN_POINT('',(2.298480775301,-2.97,0.742364817767)); +#48978 = VECTOR('',#48979,1.); +#48979 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#48980 = ORIENTED_EDGE('',*,*,#48981,.T.); +#48981 = EDGE_CURVE('',#48974,#48982,#48984,.T.); +#48982 = VERTEX_POINT('',#48983); +#48983 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.)); +#48984 = CIRCLE('',#48985,0.3); +#48985 = AXIS2_PLACEMENT_3D('',#48986,#48987,#48988); +#48986 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.3)); +#48987 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#48988 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#48989 = ORIENTED_EDGE('',*,*,#48990,.T.); +#48990 = EDGE_CURVE('',#48982,#48991,#48993,.T.); +#48991 = VERTEX_POINT('',#48992); +#48992 = CARTESIAN_POINT('',(3.,-2.97,0.)); +#48993 = LINE('',#48994,#48995); +#48994 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.)); +#48995 = VECTOR('',#48996,1.); +#48996 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#48997 = ORIENTED_EDGE('',*,*,#48998,.T.); +#48998 = EDGE_CURVE('',#48991,#48999,#49001,.T.); +#48999 = VERTEX_POINT('',#49000); +#49000 = CARTESIAN_POINT('',(3.,-2.97,0.2)); +#49001 = LINE('',#49002,#49003); +#49002 = CARTESIAN_POINT('',(3.,-2.97,0.)); +#49003 = VECTOR('',#49004,1.); +#49004 = DIRECTION('',(0.,0.,1.)); +#49005 = ORIENTED_EDGE('',*,*,#49006,.T.); +#49006 = EDGE_CURVE('',#48999,#49007,#49009,.T.); +#49007 = VERTEX_POINT('',#49008); +#49008 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.2)); +#49009 = LINE('',#49010,#49011); +#49010 = CARTESIAN_POINT('',(3.,-2.97,0.2)); +#49011 = VECTOR('',#49012,1.); +#49012 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49013 = ORIENTED_EDGE('',*,*,#49014,.T.); +#49014 = EDGE_CURVE('',#49007,#49015,#49017,.T.); +#49015 = VERTEX_POINT('',#49016); +#49016 = CARTESIAN_POINT('',(2.5764581915,-2.97,0.282635182233)); +#49017 = CIRCLE('',#49018,0.1); +#49018 = AXIS2_PLACEMENT_3D('',#49019,#49020,#49021); +#49019 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.3)); +#49020 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49021 = DIRECTION('',(0.,0.,-1.)); +#49022 = ORIENTED_EDGE('',*,*,#49023,.T.); +#49023 = EDGE_CURVE('',#49015,#49024,#49026,.T.); +#49024 = VERTEX_POINT('',#49025); +#49025 = CARTESIAN_POINT('',(2.495442325904,-2.97,0.7770944533)); +#49026 = LINE('',#49027,#49028); +#49027 = CARTESIAN_POINT('',(2.5764581915,-2.97,0.282635182233)); +#49028 = VECTOR('',#49029,1.); +#49029 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49030 = ORIENTED_EDGE('',*,*,#49031,.T.); +#49031 = EDGE_CURVE('',#49024,#49032,#49034,.T.); +#49032 = VERTEX_POINT('',#49033); +#49033 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#49034 = CIRCLE('',#49035,0.3); +#49035 = AXIS2_PLACEMENT_3D('',#49036,#49037,#49038); +#49036 = CARTESIAN_POINT('',(2.2,-2.97,0.725)); +#49037 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49038 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49039 = ORIENTED_EDGE('',*,*,#49040,.T.); +#49040 = EDGE_CURVE('',#49032,#45191,#49041,.T.); +#49041 = LINE('',#49042,#49043); +#49042 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#49043 = VECTOR('',#49044,1.); +#49044 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49045 = PLANE('',#49046); +#49046 = AXIS2_PLACEMENT_3D('',#49047,#49048,#49049); +#49047 = CARTESIAN_POINT('',(2.410970442936,-2.97,0.528115505988)); +#49048 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49049 = DIRECTION('',(0.,0.,1.)); +#49050 = ADVANCED_FACE('',(#49051),#49070,.F.); +#49051 = FACE_BOUND('',#49052,.F.); +#49052 = EDGE_LOOP('',(#49053,#49054,#49063,#49069)); +#49053 = ORIENTED_EDGE('',*,*,#45229,.T.); +#49054 = ORIENTED_EDGE('',*,*,#49055,.T.); +#49055 = EDGE_CURVE('',#45222,#49056,#49058,.T.); +#49056 = VERTEX_POINT('',#49057); +#49057 = CARTESIAN_POINT('',(2.298480775301,-3.38,0.742364817767)); +#49058 = CIRCLE('',#49059,0.1); +#49059 = AXIS2_PLACEMENT_3D('',#49060,#49061,#49062); +#49060 = CARTESIAN_POINT('',(2.2,-3.38,0.725)); +#49061 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49062 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49063 = ORIENTED_EDGE('',*,*,#49064,.F.); +#49064 = EDGE_CURVE('',#48965,#49056,#49065,.T.); +#49065 = LINE('',#49066,#49067); +#49066 = CARTESIAN_POINT('',(2.298480775301,-2.97,0.742364817767)); +#49067 = VECTOR('',#49068,1.); +#49068 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49069 = ORIENTED_EDGE('',*,*,#48964,.F.); +#49070 = CYLINDRICAL_SURFACE('',#49071,0.1); +#49071 = AXIS2_PLACEMENT_3D('',#49072,#49073,#49074); +#49072 = CARTESIAN_POINT('',(2.2,-2.97,0.725)); +#49073 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49074 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49075 = ADVANCED_FACE('',(#49076),#49154,.T.); +#49076 = FACE_BOUND('',#49077,.T.); +#49077 = EDGE_LOOP('',(#49078,#49079,#49080,#49081,#49089,#49098,#49106, + #49114,#49122,#49131,#49139,#49148)); +#49078 = ORIENTED_EDGE('',*,*,#45243,.F.); +#49079 = ORIENTED_EDGE('',*,*,#45221,.T.); +#49080 = ORIENTED_EDGE('',*,*,#49055,.T.); +#49081 = ORIENTED_EDGE('',*,*,#49082,.T.); +#49082 = EDGE_CURVE('',#49056,#49083,#49085,.T.); +#49083 = VERTEX_POINT('',#49084); +#49084 = CARTESIAN_POINT('',(2.379496640897,-3.38,0.2479055467)); +#49085 = LINE('',#49086,#49087); +#49086 = CARTESIAN_POINT('',(2.298480775301,-3.38,0.742364817767)); +#49087 = VECTOR('',#49088,1.); +#49088 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49089 = ORIENTED_EDGE('',*,*,#49090,.T.); +#49090 = EDGE_CURVE('',#49083,#49091,#49093,.T.); +#49091 = VERTEX_POINT('',#49092); +#49092 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.)); +#49093 = CIRCLE('',#49094,0.3); +#49094 = AXIS2_PLACEMENT_3D('',#49095,#49096,#49097); +#49095 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.3)); +#49096 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49097 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49098 = ORIENTED_EDGE('',*,*,#49099,.T.); +#49099 = EDGE_CURVE('',#49091,#49100,#49102,.T.); +#49100 = VERTEX_POINT('',#49101); +#49101 = CARTESIAN_POINT('',(3.,-3.38,0.)); +#49102 = LINE('',#49103,#49104); +#49103 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.)); +#49104 = VECTOR('',#49105,1.); +#49105 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49106 = ORIENTED_EDGE('',*,*,#49107,.T.); +#49107 = EDGE_CURVE('',#49100,#49108,#49110,.T.); +#49108 = VERTEX_POINT('',#49109); +#49109 = CARTESIAN_POINT('',(3.,-3.38,0.2)); +#49110 = LINE('',#49111,#49112); +#49111 = CARTESIAN_POINT('',(3.,-3.38,0.)); +#49112 = VECTOR('',#49113,1.); +#49113 = DIRECTION('',(0.,0.,1.)); +#49114 = ORIENTED_EDGE('',*,*,#49115,.T.); +#49115 = EDGE_CURVE('',#49108,#49116,#49118,.T.); +#49116 = VERTEX_POINT('',#49117); +#49117 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.2)); +#49118 = LINE('',#49119,#49120); +#49119 = CARTESIAN_POINT('',(3.,-3.38,0.2)); +#49120 = VECTOR('',#49121,1.); +#49121 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49122 = ORIENTED_EDGE('',*,*,#49123,.T.); +#49123 = EDGE_CURVE('',#49116,#49124,#49126,.T.); +#49124 = VERTEX_POINT('',#49125); +#49125 = CARTESIAN_POINT('',(2.5764581915,-3.38,0.282635182233)); +#49126 = CIRCLE('',#49127,0.1); +#49127 = AXIS2_PLACEMENT_3D('',#49128,#49129,#49130); +#49128 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.3)); +#49129 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49130 = DIRECTION('',(0.,0.,-1.)); +#49131 = ORIENTED_EDGE('',*,*,#49132,.T.); +#49132 = EDGE_CURVE('',#49124,#49133,#49135,.T.); +#49133 = VERTEX_POINT('',#49134); +#49134 = CARTESIAN_POINT('',(2.495442325904,-3.38,0.7770944533)); +#49135 = LINE('',#49136,#49137); +#49136 = CARTESIAN_POINT('',(2.5764581915,-3.38,0.282635182233)); +#49137 = VECTOR('',#49138,1.); +#49138 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49139 = ORIENTED_EDGE('',*,*,#49140,.T.); +#49140 = EDGE_CURVE('',#49133,#49141,#49143,.T.); +#49141 = VERTEX_POINT('',#49142); +#49142 = CARTESIAN_POINT('',(2.2,-3.38,1.025)); +#49143 = CIRCLE('',#49144,0.3); +#49144 = AXIS2_PLACEMENT_3D('',#49145,#49146,#49147); +#49145 = CARTESIAN_POINT('',(2.2,-3.38,0.725)); +#49146 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49147 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49148 = ORIENTED_EDGE('',*,*,#49149,.T.); +#49149 = EDGE_CURVE('',#49141,#45244,#49150,.T.); +#49150 = LINE('',#49151,#49152); +#49151 = CARTESIAN_POINT('',(2.2,-3.38,1.025)); +#49152 = VECTOR('',#49153,1.); +#49153 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49154 = PLANE('',#49155); +#49155 = AXIS2_PLACEMENT_3D('',#49156,#49157,#49158); +#49156 = CARTESIAN_POINT('',(2.410970442936,-3.38,0.528115505988)); +#49157 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49158 = DIRECTION('',(0.,0.,1.)); +#49159 = ADVANCED_FACE('',(#49160),#49176,.F.); +#49160 = FACE_BOUND('',#49161,.F.); +#49161 = EDGE_LOOP('',(#49162,#49168,#49169,#49175)); +#49162 = ORIENTED_EDGE('',*,*,#49163,.F.); +#49163 = EDGE_CURVE('',#45244,#45760,#49164,.T.); +#49164 = LINE('',#49165,#49166); +#49165 = CARTESIAN_POINT('',(2.2,-3.38,1.025)); +#49166 = VECTOR('',#49167,1.); +#49167 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49168 = ORIENTED_EDGE('',*,*,#45260,.T.); +#49169 = ORIENTED_EDGE('',*,*,#49170,.T.); +#49170 = EDGE_CURVE('',#45253,#45768,#49171,.T.); +#49171 = LINE('',#49172,#49173); +#49172 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#49173 = VECTOR('',#49174,1.); +#49174 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49175 = ORIENTED_EDGE('',*,*,#45767,.F.); +#49176 = PLANE('',#49177); +#49177 = AXIS2_PLACEMENT_3D('',#49178,#49179,#49180); +#49178 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#49179 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#49180 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#49181 = ADVANCED_FACE('',(#49182),#49268,.F.); +#49182 = FACE_BOUND('',#49183,.F.); +#49183 = EDGE_LOOP('',(#49184,#49185,#49186,#49195,#49203,#49212,#49220, + #49228,#49236,#49245,#49253,#49262)); +#49184 = ORIENTED_EDGE('',*,*,#45252,.F.); +#49185 = ORIENTED_EDGE('',*,*,#45274,.T.); +#49186 = ORIENTED_EDGE('',*,*,#49187,.T.); +#49187 = EDGE_CURVE('',#45275,#49188,#49190,.T.); +#49188 = VERTEX_POINT('',#49189); +#49189 = CARTESIAN_POINT('',(2.298480775301,-4.24,0.742364817767)); +#49190 = CIRCLE('',#49191,0.1); +#49191 = AXIS2_PLACEMENT_3D('',#49192,#49193,#49194); +#49192 = CARTESIAN_POINT('',(2.2,-4.24,0.725)); +#49193 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49194 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49195 = ORIENTED_EDGE('',*,*,#49196,.T.); +#49196 = EDGE_CURVE('',#49188,#49197,#49199,.T.); +#49197 = VERTEX_POINT('',#49198); +#49198 = CARTESIAN_POINT('',(2.379496640897,-4.24,0.2479055467)); +#49199 = LINE('',#49200,#49201); +#49200 = CARTESIAN_POINT('',(2.298480775301,-4.24,0.742364817767)); +#49201 = VECTOR('',#49202,1.); +#49202 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49203 = ORIENTED_EDGE('',*,*,#49204,.T.); +#49204 = EDGE_CURVE('',#49197,#49205,#49207,.T.); +#49205 = VERTEX_POINT('',#49206); +#49206 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.)); +#49207 = CIRCLE('',#49208,0.3); +#49208 = AXIS2_PLACEMENT_3D('',#49209,#49210,#49211); +#49209 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.3)); +#49210 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49211 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49212 = ORIENTED_EDGE('',*,*,#49213,.T.); +#49213 = EDGE_CURVE('',#49205,#49214,#49216,.T.); +#49214 = VERTEX_POINT('',#49215); +#49215 = CARTESIAN_POINT('',(3.,-4.24,0.)); +#49216 = LINE('',#49217,#49218); +#49217 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.)); +#49218 = VECTOR('',#49219,1.); +#49219 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49220 = ORIENTED_EDGE('',*,*,#49221,.T.); +#49221 = EDGE_CURVE('',#49214,#49222,#49224,.T.); +#49222 = VERTEX_POINT('',#49223); +#49223 = CARTESIAN_POINT('',(3.,-4.24,0.2)); +#49224 = LINE('',#49225,#49226); +#49225 = CARTESIAN_POINT('',(3.,-4.24,0.)); +#49226 = VECTOR('',#49227,1.); +#49227 = DIRECTION('',(0.,0.,1.)); +#49228 = ORIENTED_EDGE('',*,*,#49229,.T.); +#49229 = EDGE_CURVE('',#49222,#49230,#49232,.T.); +#49230 = VERTEX_POINT('',#49231); +#49231 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.2)); +#49232 = LINE('',#49233,#49234); +#49233 = CARTESIAN_POINT('',(3.,-4.24,0.2)); +#49234 = VECTOR('',#49235,1.); +#49235 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49236 = ORIENTED_EDGE('',*,*,#49237,.T.); +#49237 = EDGE_CURVE('',#49230,#49238,#49240,.T.); +#49238 = VERTEX_POINT('',#49239); +#49239 = CARTESIAN_POINT('',(2.5764581915,-4.24,0.282635182233)); +#49240 = CIRCLE('',#49241,0.1); +#49241 = AXIS2_PLACEMENT_3D('',#49242,#49243,#49244); +#49242 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.3)); +#49243 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49244 = DIRECTION('',(0.,0.,-1.)); +#49245 = ORIENTED_EDGE('',*,*,#49246,.T.); +#49246 = EDGE_CURVE('',#49238,#49247,#49249,.T.); +#49247 = VERTEX_POINT('',#49248); +#49248 = CARTESIAN_POINT('',(2.495442325904,-4.24,0.7770944533)); +#49249 = LINE('',#49250,#49251); +#49250 = CARTESIAN_POINT('',(2.5764581915,-4.24,0.282635182233)); +#49251 = VECTOR('',#49252,1.); +#49252 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49253 = ORIENTED_EDGE('',*,*,#49254,.T.); +#49254 = EDGE_CURVE('',#49247,#49255,#49257,.T.); +#49255 = VERTEX_POINT('',#49256); +#49256 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#49257 = CIRCLE('',#49258,0.3); +#49258 = AXIS2_PLACEMENT_3D('',#49259,#49260,#49261); +#49259 = CARTESIAN_POINT('',(2.2,-4.24,0.725)); +#49260 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49261 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49262 = ORIENTED_EDGE('',*,*,#49263,.T.); +#49263 = EDGE_CURVE('',#49255,#45253,#49264,.T.); +#49264 = LINE('',#49265,#49266); +#49265 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#49266 = VECTOR('',#49267,1.); +#49267 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49268 = PLANE('',#49269); +#49269 = AXIS2_PLACEMENT_3D('',#49270,#49271,#49272); +#49270 = CARTESIAN_POINT('',(2.410970442936,-4.24,0.528115505988)); +#49271 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49272 = DIRECTION('',(0.,0.,1.)); +#49273 = ADVANCED_FACE('',(#49274),#49293,.F.); +#49274 = FACE_BOUND('',#49275,.F.); +#49275 = EDGE_LOOP('',(#49276,#49277,#49286,#49292)); +#49276 = ORIENTED_EDGE('',*,*,#45291,.T.); +#49277 = ORIENTED_EDGE('',*,*,#49278,.T.); +#49278 = EDGE_CURVE('',#45284,#49279,#49281,.T.); +#49279 = VERTEX_POINT('',#49280); +#49280 = CARTESIAN_POINT('',(2.298480775301,-4.65,0.742364817767)); +#49281 = CIRCLE('',#49282,0.1); +#49282 = AXIS2_PLACEMENT_3D('',#49283,#49284,#49285); +#49283 = CARTESIAN_POINT('',(2.2,-4.65,0.725)); +#49284 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49285 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49286 = ORIENTED_EDGE('',*,*,#49287,.F.); +#49287 = EDGE_CURVE('',#49188,#49279,#49288,.T.); +#49288 = LINE('',#49289,#49290); +#49289 = CARTESIAN_POINT('',(2.298480775301,-4.24,0.742364817767)); +#49290 = VECTOR('',#49291,1.); +#49291 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49292 = ORIENTED_EDGE('',*,*,#49187,.F.); +#49293 = CYLINDRICAL_SURFACE('',#49294,0.1); +#49294 = AXIS2_PLACEMENT_3D('',#49295,#49296,#49297); +#49295 = CARTESIAN_POINT('',(2.2,-4.24,0.725)); +#49296 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49297 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49298 = ADVANCED_FACE('',(#49299),#49377,.T.); +#49299 = FACE_BOUND('',#49300,.T.); +#49300 = EDGE_LOOP('',(#49301,#49302,#49303,#49304,#49312,#49321,#49329, + #49337,#49345,#49354,#49362,#49371)); +#49301 = ORIENTED_EDGE('',*,*,#45305,.F.); +#49302 = ORIENTED_EDGE('',*,*,#45283,.T.); +#49303 = ORIENTED_EDGE('',*,*,#49278,.T.); +#49304 = ORIENTED_EDGE('',*,*,#49305,.T.); +#49305 = EDGE_CURVE('',#49279,#49306,#49308,.T.); +#49306 = VERTEX_POINT('',#49307); +#49307 = CARTESIAN_POINT('',(2.379496640897,-4.65,0.2479055467)); +#49308 = LINE('',#49309,#49310); +#49309 = CARTESIAN_POINT('',(2.298480775301,-4.65,0.742364817767)); +#49310 = VECTOR('',#49311,1.); +#49311 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49312 = ORIENTED_EDGE('',*,*,#49313,.T.); +#49313 = EDGE_CURVE('',#49306,#49314,#49316,.T.); +#49314 = VERTEX_POINT('',#49315); +#49315 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.)); +#49316 = CIRCLE('',#49317,0.3); +#49317 = AXIS2_PLACEMENT_3D('',#49318,#49319,#49320); +#49318 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.3)); +#49319 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49320 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49321 = ORIENTED_EDGE('',*,*,#49322,.T.); +#49322 = EDGE_CURVE('',#49314,#49323,#49325,.T.); +#49323 = VERTEX_POINT('',#49324); +#49324 = CARTESIAN_POINT('',(3.,-4.65,0.)); +#49325 = LINE('',#49326,#49327); +#49326 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.)); +#49327 = VECTOR('',#49328,1.); +#49328 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49329 = ORIENTED_EDGE('',*,*,#49330,.T.); +#49330 = EDGE_CURVE('',#49323,#49331,#49333,.T.); +#49331 = VERTEX_POINT('',#49332); +#49332 = CARTESIAN_POINT('',(3.,-4.65,0.2)); +#49333 = LINE('',#49334,#49335); +#49334 = CARTESIAN_POINT('',(3.,-4.65,0.)); +#49335 = VECTOR('',#49336,1.); +#49336 = DIRECTION('',(0.,0.,1.)); +#49337 = ORIENTED_EDGE('',*,*,#49338,.T.); +#49338 = EDGE_CURVE('',#49331,#49339,#49341,.T.); +#49339 = VERTEX_POINT('',#49340); +#49340 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.2)); +#49341 = LINE('',#49342,#49343); +#49342 = CARTESIAN_POINT('',(3.,-4.65,0.2)); +#49343 = VECTOR('',#49344,1.); +#49344 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49345 = ORIENTED_EDGE('',*,*,#49346,.T.); +#49346 = EDGE_CURVE('',#49339,#49347,#49349,.T.); +#49347 = VERTEX_POINT('',#49348); +#49348 = CARTESIAN_POINT('',(2.5764581915,-4.65,0.282635182233)); +#49349 = CIRCLE('',#49350,0.1); +#49350 = AXIS2_PLACEMENT_3D('',#49351,#49352,#49353); +#49351 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.3)); +#49352 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49353 = DIRECTION('',(0.,0.,-1.)); +#49354 = ORIENTED_EDGE('',*,*,#49355,.T.); +#49355 = EDGE_CURVE('',#49347,#49356,#49358,.T.); +#49356 = VERTEX_POINT('',#49357); +#49357 = CARTESIAN_POINT('',(2.495442325904,-4.65,0.7770944533)); +#49358 = LINE('',#49359,#49360); +#49359 = CARTESIAN_POINT('',(2.5764581915,-4.65,0.282635182233)); +#49360 = VECTOR('',#49361,1.); +#49361 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49362 = ORIENTED_EDGE('',*,*,#49363,.T.); +#49363 = EDGE_CURVE('',#49356,#49364,#49366,.T.); +#49364 = VERTEX_POINT('',#49365); +#49365 = CARTESIAN_POINT('',(2.2,-4.65,1.025)); +#49366 = CIRCLE('',#49367,0.3); +#49367 = AXIS2_PLACEMENT_3D('',#49368,#49369,#49370); +#49368 = CARTESIAN_POINT('',(2.2,-4.65,0.725)); +#49369 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49370 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49371 = ORIENTED_EDGE('',*,*,#49372,.T.); +#49372 = EDGE_CURVE('',#49364,#45306,#49373,.T.); +#49373 = LINE('',#49374,#49375); +#49374 = CARTESIAN_POINT('',(2.2,-4.65,1.025)); +#49375 = VECTOR('',#49376,1.); +#49376 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49377 = PLANE('',#49378); +#49378 = AXIS2_PLACEMENT_3D('',#49379,#49380,#49381); +#49379 = CARTESIAN_POINT('',(2.410970442936,-4.65,0.528115505988)); +#49380 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49381 = DIRECTION('',(0.,0.,1.)); +#49382 = ADVANCED_FACE('',(#49383),#49394,.T.); +#49383 = FACE_BOUND('',#49384,.T.); +#49384 = EDGE_LOOP('',(#49385,#49386,#49387,#49388)); +#49385 = ORIENTED_EDGE('',*,*,#47525,.T.); +#49386 = ORIENTED_EDGE('',*,*,#45406,.T.); +#49387 = ORIENTED_EDGE('',*,*,#47627,.F.); +#49388 = ORIENTED_EDGE('',*,*,#49389,.F.); +#49389 = EDGE_CURVE('',#47518,#47620,#49390,.T.); +#49390 = LINE('',#49391,#49392); +#49391 = CARTESIAN_POINT('',(-2.495442325904,4.24,0.7770944533)); +#49392 = VECTOR('',#49393,1.); +#49393 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49394 = CYLINDRICAL_SURFACE('',#49395,0.3); +#49395 = AXIS2_PLACEMENT_3D('',#49396,#49397,#49398); +#49396 = CARTESIAN_POINT('',(-2.2,4.24,0.725)); +#49397 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#49398 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#49399 = ADVANCED_FACE('',(#49400),#49413,.F.); +#49400 = FACE_BOUND('',#49401,.F.); +#49401 = EDGE_LOOP('',(#49402,#49403,#49409,#49410,#49411,#49412)); +#49402 = ORIENTED_EDGE('',*,*,#45978,.F.); +#49403 = ORIENTED_EDGE('',*,*,#49404,.T.); +#49404 = EDGE_CURVE('',#45970,#46079,#49405,.T.); +#49405 = LINE('',#49406,#49407); +#49406 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#49407 = VECTOR('',#49408,1.); +#49408 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49409 = ORIENTED_EDGE('',*,*,#46087,.T.); +#49410 = ORIENTED_EDGE('',*,*,#46109,.T.); +#49411 = ORIENTED_EDGE('',*,*,#45453,.F.); +#49412 = ORIENTED_EDGE('',*,*,#45852,.F.); +#49413 = PLANE('',#49414); +#49414 = AXIS2_PLACEMENT_3D('',#49415,#49416,#49417); +#49415 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#49416 = DIRECTION('',(0.,0.,-1.)); +#49417 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49418 = ADVANCED_FACE('',(#49419),#49432,.F.); +#49419 = FACE_BOUND('',#49420,.F.); +#49420 = EDGE_LOOP('',(#49421,#49422,#49428,#49429,#49430,#49431)); +#49421 = ORIENTED_EDGE('',*,*,#46201,.F.); +#49422 = ORIENTED_EDGE('',*,*,#49423,.T.); +#49423 = EDGE_CURVE('',#46193,#46302,#49424,.T.); +#49424 = LINE('',#49425,#49426); +#49425 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#49426 = VECTOR('',#49427,1.); +#49427 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49428 = ORIENTED_EDGE('',*,*,#46310,.T.); +#49429 = ORIENTED_EDGE('',*,*,#46332,.T.); +#49430 = ORIENTED_EDGE('',*,*,#45469,.F.); +#49431 = ORIENTED_EDGE('',*,*,#46102,.F.); +#49432 = PLANE('',#49433); +#49433 = AXIS2_PLACEMENT_3D('',#49434,#49435,#49436); +#49434 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#49435 = DIRECTION('',(0.,0.,-1.)); +#49436 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49437 = ADVANCED_FACE('',(#49438),#49451,.F.); +#49438 = FACE_BOUND('',#49439,.F.); +#49439 = EDGE_LOOP('',(#49440,#49441,#49447,#49448,#49449,#49450)); +#49440 = ORIENTED_EDGE('',*,*,#46424,.F.); +#49441 = ORIENTED_EDGE('',*,*,#49442,.T.); +#49442 = EDGE_CURVE('',#46416,#46525,#49443,.T.); +#49443 = LINE('',#49444,#49445); +#49444 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#49445 = VECTOR('',#49446,1.); +#49446 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49447 = ORIENTED_EDGE('',*,*,#46533,.T.); +#49448 = ORIENTED_EDGE('',*,*,#46555,.T.); +#49449 = ORIENTED_EDGE('',*,*,#45485,.F.); +#49450 = ORIENTED_EDGE('',*,*,#46325,.F.); +#49451 = PLANE('',#49452); +#49452 = AXIS2_PLACEMENT_3D('',#49453,#49454,#49455); +#49453 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#49454 = DIRECTION('',(0.,0.,-1.)); +#49455 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49456 = ADVANCED_FACE('',(#49457),#49470,.F.); +#49457 = FACE_BOUND('',#49458,.F.); +#49458 = EDGE_LOOP('',(#49459,#49460,#49466,#49467,#49468,#49469)); +#49459 = ORIENTED_EDGE('',*,*,#46647,.F.); +#49460 = ORIENTED_EDGE('',*,*,#49461,.T.); +#49461 = EDGE_CURVE('',#46639,#46748,#49462,.T.); +#49462 = LINE('',#49463,#49464); +#49463 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#49464 = VECTOR('',#49465,1.); +#49465 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49466 = ORIENTED_EDGE('',*,*,#46756,.T.); +#49467 = ORIENTED_EDGE('',*,*,#46778,.T.); +#49468 = ORIENTED_EDGE('',*,*,#45501,.F.); +#49469 = ORIENTED_EDGE('',*,*,#46548,.F.); +#49470 = PLANE('',#49471); +#49471 = AXIS2_PLACEMENT_3D('',#49472,#49473,#49474); +#49472 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#49473 = DIRECTION('',(0.,0.,-1.)); +#49474 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49475 = ADVANCED_FACE('',(#49476),#49489,.F.); +#49476 = FACE_BOUND('',#49477,.F.); +#49477 = EDGE_LOOP('',(#49478,#49479,#49485,#49486,#49487,#49488)); +#49478 = ORIENTED_EDGE('',*,*,#46870,.F.); +#49479 = ORIENTED_EDGE('',*,*,#49480,.T.); +#49480 = EDGE_CURVE('',#46862,#46971,#49481,.T.); +#49481 = LINE('',#49482,#49483); +#49482 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#49483 = VECTOR('',#49484,1.); +#49484 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49485 = ORIENTED_EDGE('',*,*,#46979,.T.); +#49486 = ORIENTED_EDGE('',*,*,#47001,.T.); +#49487 = ORIENTED_EDGE('',*,*,#45517,.F.); +#49488 = ORIENTED_EDGE('',*,*,#46771,.F.); +#49489 = PLANE('',#49490); +#49490 = AXIS2_PLACEMENT_3D('',#49491,#49492,#49493); +#49491 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#49492 = DIRECTION('',(0.,0.,-1.)); +#49493 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49494 = ADVANCED_FACE('',(#49495),#49508,.F.); +#49495 = FACE_BOUND('',#49496,.F.); +#49496 = EDGE_LOOP('',(#49497,#49498,#49504,#49505,#49506,#49507)); +#49497 = ORIENTED_EDGE('',*,*,#47093,.F.); +#49498 = ORIENTED_EDGE('',*,*,#49499,.T.); +#49499 = EDGE_CURVE('',#47085,#47194,#49500,.T.); +#49500 = LINE('',#49501,#49502); +#49501 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#49502 = VECTOR('',#49503,1.); +#49503 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49504 = ORIENTED_EDGE('',*,*,#47202,.T.); +#49505 = ORIENTED_EDGE('',*,*,#47224,.T.); +#49506 = ORIENTED_EDGE('',*,*,#45533,.F.); +#49507 = ORIENTED_EDGE('',*,*,#46994,.F.); +#49508 = PLANE('',#49509); +#49509 = AXIS2_PLACEMENT_3D('',#49510,#49511,#49512); +#49510 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#49511 = DIRECTION('',(0.,0.,-1.)); +#49512 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49513 = ADVANCED_FACE('',(#49514),#49527,.F.); +#49514 = FACE_BOUND('',#49515,.F.); +#49515 = EDGE_LOOP('',(#49516,#49517,#49523,#49524,#49525,#49526)); +#49516 = ORIENTED_EDGE('',*,*,#47316,.F.); +#49517 = ORIENTED_EDGE('',*,*,#49518,.T.); +#49518 = EDGE_CURVE('',#47308,#47417,#49519,.T.); +#49519 = LINE('',#49520,#49521); +#49520 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#49521 = VECTOR('',#49522,1.); +#49522 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49523 = ORIENTED_EDGE('',*,*,#47425,.T.); +#49524 = ORIENTED_EDGE('',*,*,#47442,.T.); +#49525 = ORIENTED_EDGE('',*,*,#45549,.F.); +#49526 = ORIENTED_EDGE('',*,*,#47217,.F.); +#49527 = PLANE('',#49528); +#49528 = AXIS2_PLACEMENT_3D('',#49529,#49530,#49531); +#49529 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#49530 = DIRECTION('',(0.,0.,-1.)); +#49531 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49532 = ADVANCED_FACE('',(#49533,#49562),#49573,.T.); +#49533 = FACE_BOUND('',#49534,.T.); +#49534 = EDGE_LOOP('',(#49535,#49536,#49537,#49538,#49546,#49554,#49560, + #49561)); +#49535 = ORIENTED_EDGE('',*,*,#45624,.F.); +#49536 = ORIENTED_EDGE('',*,*,#45601,.F.); +#49537 = ORIENTED_EDGE('',*,*,#45572,.F.); +#49538 = ORIENTED_EDGE('',*,*,#49539,.F.); +#49539 = EDGE_CURVE('',#49540,#45573,#49542,.T.); +#49540 = VERTEX_POINT('',#49541); +#49541 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#49542 = LINE('',#49543,#49544); +#49543 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#49544 = VECTOR('',#49545,1.); +#49545 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#49546 = ORIENTED_EDGE('',*,*,#49547,.F.); +#49547 = EDGE_CURVE('',#49548,#49540,#49550,.T.); +#49548 = VERTEX_POINT('',#49549); +#49549 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#49550 = LINE('',#49551,#49552); +#49551 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#49552 = VECTOR('',#49553,1.); +#49553 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49554 = ORIENTED_EDGE('',*,*,#49555,.F.); +#49555 = EDGE_CURVE('',#45792,#49548,#49556,.T.); +#49556 = LINE('',#49557,#49558); +#49557 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#49558 = VECTOR('',#49559,1.); +#49559 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#49560 = ORIENTED_EDGE('',*,*,#45798,.F.); +#49561 = ORIENTED_EDGE('',*,*,#45647,.F.); +#49562 = FACE_BOUND('',#49563,.T.); +#49563 = EDGE_LOOP('',(#49564)); +#49564 = ORIENTED_EDGE('',*,*,#49565,.T.); +#49565 = EDGE_CURVE('',#49566,#49566,#49568,.T.); +#49566 = VERTEX_POINT('',#49567); +#49567 = CARTESIAN_POINT('',(-0.960171280765,3.660171280765,1.75)); +#49568 = CIRCLE('',#49569,0.3); +#49569 = AXIS2_PLACEMENT_3D('',#49570,#49571,#49572); +#49570 = CARTESIAN_POINT('',(-0.960171280765,3.960171280765,1.75)); +#49571 = DIRECTION('',(0.,-0.,-1.)); +#49572 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49573 = PLANE('',#49574); +#49574 = AXIS2_PLACEMENT_3D('',#49575,#49576,#49577); +#49575 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#49576 = DIRECTION('',(0.,0.,1.)); +#49577 = DIRECTION('',(0.33282455482,-0.942988767541,0.)); +#49578 = ADVANCED_FACE('',(#49579),#49589,.F.); +#49579 = FACE_BOUND('',#49580,.F.); +#49580 = EDGE_LOOP('',(#49581,#49582,#49583,#49584)); +#49581 = ORIENTED_EDGE('',*,*,#45859,.T.); +#49582 = ORIENTED_EDGE('',*,*,#45580,.T.); +#49583 = ORIENTED_EDGE('',*,*,#49539,.F.); +#49584 = ORIENTED_EDGE('',*,*,#49585,.F.); +#49585 = EDGE_CURVE('',#45860,#49540,#49586,.T.); +#49586 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#49587,#49588),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#49587 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#49588 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#49589 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#49590,#49591) + ,(#49592,#49593 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#49590 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#49591 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#49592 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#49593 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#49594 = ADVANCED_FACE('',(#49595),#49608,.F.); +#49595 = FACE_BOUND('',#49596,.F.); +#49596 = EDGE_LOOP('',(#49597,#49598,#49604,#49605,#49606,#49607)); +#49597 = ORIENTED_EDGE('',*,*,#47925,.F.); +#49598 = ORIENTED_EDGE('',*,*,#49599,.T.); +#49599 = EDGE_CURVE('',#47917,#48026,#49600,.T.); +#49600 = LINE('',#49601,#49602); +#49601 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#49602 = VECTOR('',#49603,1.); +#49603 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49604 = ORIENTED_EDGE('',*,*,#48034,.T.); +#49605 = ORIENTED_EDGE('',*,*,#48048,.T.); +#49606 = ORIENTED_EDGE('',*,*,#45679,.F.); +#49607 = ORIENTED_EDGE('',*,*,#47832,.F.); +#49608 = PLANE('',#49609); +#49609 = AXIS2_PLACEMENT_3D('',#49610,#49611,#49612); +#49610 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#49611 = DIRECTION('',(0.,0.,-1.)); +#49612 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#49613 = ADVANCED_FACE('',(#49614),#49627,.F.); +#49614 = FACE_BOUND('',#49615,.F.); +#49615 = EDGE_LOOP('',(#49616,#49617,#49623,#49624,#49625,#49626)); +#49616 = ORIENTED_EDGE('',*,*,#48148,.F.); +#49617 = ORIENTED_EDGE('',*,*,#49618,.T.); +#49618 = EDGE_CURVE('',#48140,#48249,#49619,.T.); +#49619 = LINE('',#49620,#49621); +#49620 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#49621 = VECTOR('',#49622,1.); +#49622 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49623 = ORIENTED_EDGE('',*,*,#48257,.T.); +#49624 = ORIENTED_EDGE('',*,*,#48271,.T.); +#49625 = ORIENTED_EDGE('',*,*,#45695,.F.); +#49626 = ORIENTED_EDGE('',*,*,#48055,.F.); +#49627 = PLANE('',#49628); +#49628 = AXIS2_PLACEMENT_3D('',#49629,#49630,#49631); +#49629 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#49630 = DIRECTION('',(0.,0.,-1.)); +#49631 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#49632 = ADVANCED_FACE('',(#49633),#49646,.F.); +#49633 = FACE_BOUND('',#49634,.F.); +#49634 = EDGE_LOOP('',(#49635,#49636,#49642,#49643,#49644,#49645)); +#49635 = ORIENTED_EDGE('',*,*,#48371,.F.); +#49636 = ORIENTED_EDGE('',*,*,#49637,.T.); +#49637 = EDGE_CURVE('',#48363,#48472,#49638,.T.); +#49638 = LINE('',#49639,#49640); +#49639 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#49640 = VECTOR('',#49641,1.); +#49641 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49642 = ORIENTED_EDGE('',*,*,#48480,.T.); +#49643 = ORIENTED_EDGE('',*,*,#48494,.T.); +#49644 = ORIENTED_EDGE('',*,*,#45711,.F.); +#49645 = ORIENTED_EDGE('',*,*,#48278,.F.); +#49646 = PLANE('',#49647); +#49647 = AXIS2_PLACEMENT_3D('',#49648,#49649,#49650); +#49648 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#49649 = DIRECTION('',(0.,0.,-1.)); +#49650 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#49651 = ADVANCED_FACE('',(#49652),#49665,.F.); +#49652 = FACE_BOUND('',#49653,.F.); +#49653 = EDGE_LOOP('',(#49654,#49655,#49661,#49662,#49663,#49664)); +#49654 = ORIENTED_EDGE('',*,*,#48594,.F.); +#49655 = ORIENTED_EDGE('',*,*,#49656,.T.); +#49656 = EDGE_CURVE('',#48586,#48695,#49657,.T.); +#49657 = LINE('',#49658,#49659); +#49658 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#49659 = VECTOR('',#49660,1.); +#49660 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49661 = ORIENTED_EDGE('',*,*,#48703,.T.); +#49662 = ORIENTED_EDGE('',*,*,#48717,.T.); +#49663 = ORIENTED_EDGE('',*,*,#45727,.F.); +#49664 = ORIENTED_EDGE('',*,*,#48501,.F.); +#49665 = PLANE('',#49666); +#49666 = AXIS2_PLACEMENT_3D('',#49667,#49668,#49669); +#49667 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#49668 = DIRECTION('',(0.,0.,-1.)); +#49669 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#49670 = ADVANCED_FACE('',(#49671),#49684,.F.); +#49671 = FACE_BOUND('',#49672,.F.); +#49672 = EDGE_LOOP('',(#49673,#49674,#49680,#49681,#49682,#49683)); +#49673 = ORIENTED_EDGE('',*,*,#48817,.F.); +#49674 = ORIENTED_EDGE('',*,*,#49675,.T.); +#49675 = EDGE_CURVE('',#48809,#48918,#49676,.T.); +#49676 = LINE('',#49677,#49678); +#49677 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#49678 = VECTOR('',#49679,1.); +#49679 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49680 = ORIENTED_EDGE('',*,*,#48926,.T.); +#49681 = ORIENTED_EDGE('',*,*,#48940,.T.); +#49682 = ORIENTED_EDGE('',*,*,#45743,.F.); +#49683 = ORIENTED_EDGE('',*,*,#48724,.F.); +#49684 = PLANE('',#49685); +#49685 = AXIS2_PLACEMENT_3D('',#49686,#49687,#49688); +#49686 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#49687 = DIRECTION('',(0.,0.,-1.)); +#49688 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#49689 = ADVANCED_FACE('',(#49690),#49703,.F.); +#49690 = FACE_BOUND('',#49691,.F.); +#49691 = EDGE_LOOP('',(#49692,#49693,#49699,#49700,#49701,#49702)); +#49692 = ORIENTED_EDGE('',*,*,#49040,.F.); +#49693 = ORIENTED_EDGE('',*,*,#49694,.T.); +#49694 = EDGE_CURVE('',#49032,#49141,#49695,.T.); +#49695 = LINE('',#49696,#49697); +#49696 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#49697 = VECTOR('',#49698,1.); +#49698 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49699 = ORIENTED_EDGE('',*,*,#49149,.T.); +#49700 = ORIENTED_EDGE('',*,*,#49163,.T.); +#49701 = ORIENTED_EDGE('',*,*,#45759,.F.); +#49702 = ORIENTED_EDGE('',*,*,#48947,.F.); +#49703 = PLANE('',#49704); +#49704 = AXIS2_PLACEMENT_3D('',#49705,#49706,#49707); +#49705 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#49706 = DIRECTION('',(0.,0.,-1.)); +#49707 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#49708 = ADVANCED_FACE('',(#49709),#49722,.F.); +#49709 = FACE_BOUND('',#49710,.F.); +#49710 = EDGE_LOOP('',(#49711,#49712,#49718,#49719,#49720,#49721)); +#49711 = ORIENTED_EDGE('',*,*,#49263,.F.); +#49712 = ORIENTED_EDGE('',*,*,#49713,.T.); +#49713 = EDGE_CURVE('',#49255,#49364,#49714,.T.); +#49714 = LINE('',#49715,#49716); +#49715 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#49716 = VECTOR('',#49717,1.); +#49717 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49718 = ORIENTED_EDGE('',*,*,#49372,.T.); +#49719 = ORIENTED_EDGE('',*,*,#45882,.T.); +#49720 = ORIENTED_EDGE('',*,*,#45775,.F.); +#49721 = ORIENTED_EDGE('',*,*,#49170,.F.); +#49722 = PLANE('',#49723); +#49723 = AXIS2_PLACEMENT_3D('',#49724,#49725,#49726); +#49724 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#49725 = DIRECTION('',(0.,0.,-1.)); +#49726 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#49727 = ADVANCED_FACE('',(#49728),#49738,.F.); +#49728 = FACE_BOUND('',#49729,.F.); +#49729 = EDGE_LOOP('',(#49730,#49731,#49736,#49737)); +#49730 = ORIENTED_EDGE('',*,*,#45875,.T.); +#49731 = ORIENTED_EDGE('',*,*,#49732,.T.); +#49732 = EDGE_CURVE('',#45868,#49548,#49733,.T.); +#49733 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#49734,#49735),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#49734 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#49735 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#49736 = ORIENTED_EDGE('',*,*,#49555,.F.); +#49737 = ORIENTED_EDGE('',*,*,#45791,.F.); +#49738 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#49739,#49740) + ,(#49741,#49742 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#49739 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#49740 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#49741 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#49742 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#49743 = ADVANCED_FACE('',(#49744),#49755,.T.); +#49744 = FACE_BOUND('',#49745,.T.); +#49745 = EDGE_LOOP('',(#49746,#49747,#49748,#49749)); +#49746 = ORIENTED_EDGE('',*,*,#47712,.T.); +#49747 = ORIENTED_EDGE('',*,*,#45821,.T.); +#49748 = ORIENTED_EDGE('',*,*,#47814,.F.); +#49749 = ORIENTED_EDGE('',*,*,#49750,.F.); +#49750 = EDGE_CURVE('',#47705,#47807,#49751,.T.); +#49751 = LINE('',#49752,#49753); +#49752 = CARTESIAN_POINT('',(2.495442325904,4.65,0.7770944533)); +#49753 = VECTOR('',#49754,1.); +#49754 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49755 = CYLINDRICAL_SURFACE('',#49756,0.3); +#49756 = AXIS2_PLACEMENT_3D('',#49757,#49758,#49759); +#49757 = CARTESIAN_POINT('',(2.2,4.65,0.725)); +#49758 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49759 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49760 = ADVANCED_FACE('',(#49761),#49767,.F.); +#49761 = FACE_BOUND('',#49762,.F.); +#49762 = EDGE_LOOP('',(#49763,#49764,#49765,#49766)); +#49763 = ORIENTED_EDGE('',*,*,#45867,.T.); +#49764 = ORIENTED_EDGE('',*,*,#49585,.T.); +#49765 = ORIENTED_EDGE('',*,*,#49547,.F.); +#49766 = ORIENTED_EDGE('',*,*,#49732,.F.); +#49767 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#49768,#49769) + ,(#49770,#49771 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#49768 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#49769 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#49770 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#49771 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#49772 = ADVANCED_FACE('',(#49773),#49784,.T.); +#49773 = FACE_BOUND('',#49774,.T.); +#49774 = EDGE_LOOP('',(#49775,#49776,#49777,#49778)); +#49775 = ORIENTED_EDGE('',*,*,#45969,.T.); +#49776 = ORIENTED_EDGE('',*,*,#49404,.T.); +#49777 = ORIENTED_EDGE('',*,*,#46078,.F.); +#49778 = ORIENTED_EDGE('',*,*,#49779,.F.); +#49779 = EDGE_CURVE('',#45962,#46071,#49780,.T.); +#49780 = LINE('',#49781,#49782); +#49781 = CARTESIAN_POINT('',(-2.495442325904,-4.65,0.7770944533)); +#49782 = VECTOR('',#49783,1.); +#49783 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49784 = CYLINDRICAL_SURFACE('',#49785,0.3); +#49785 = AXIS2_PLACEMENT_3D('',#49786,#49787,#49788); +#49786 = CARTESIAN_POINT('',(-2.2,-4.65,0.725)); +#49787 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#49788 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#49789 = ADVANCED_FACE('',(#49790),#49801,.F.); +#49790 = FACE_BOUND('',#49791,.F.); +#49791 = EDGE_LOOP('',(#49792,#49798,#49799,#49800)); +#49792 = ORIENTED_EDGE('',*,*,#49793,.T.); +#49793 = EDGE_CURVE('',#45953,#46062,#49794,.T.); +#49794 = LINE('',#49795,#49796); +#49795 = CARTESIAN_POINT('',(-2.5764581915,-4.65,0.282635182233)); +#49796 = VECTOR('',#49797,1.); +#49797 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49798 = ORIENTED_EDGE('',*,*,#46070,.T.); +#49799 = ORIENTED_EDGE('',*,*,#49779,.F.); +#49800 = ORIENTED_EDGE('',*,*,#45961,.F.); +#49801 = PLANE('',#49802); +#49802 = AXIS2_PLACEMENT_3D('',#49803,#49804,#49805); +#49803 = CARTESIAN_POINT('',(-2.5764581915,-4.65,0.282635182233)); +#49804 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#49805 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#49806 = ADVANCED_FACE('',(#49807),#49818,.F.); +#49807 = FACE_BOUND('',#49808,.F.); +#49808 = EDGE_LOOP('',(#49809,#49815,#49816,#49817)); +#49809 = ORIENTED_EDGE('',*,*,#49810,.T.); +#49810 = EDGE_CURVE('',#45945,#46054,#49811,.T.); +#49811 = LINE('',#49812,#49813); +#49812 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.2)); +#49813 = VECTOR('',#49814,1.); +#49814 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49815 = ORIENTED_EDGE('',*,*,#46061,.T.); +#49816 = ORIENTED_EDGE('',*,*,#49793,.F.); +#49817 = ORIENTED_EDGE('',*,*,#45952,.F.); +#49818 = CYLINDRICAL_SURFACE('',#49819,0.1); +#49819 = AXIS2_PLACEMENT_3D('',#49820,#49821,#49822); +#49820 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.3)); +#49821 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#49822 = DIRECTION('',(-0.,0.,-1.)); +#49823 = ADVANCED_FACE('',(#49824),#49835,.F.); +#49824 = FACE_BOUND('',#49825,.F.); +#49825 = EDGE_LOOP('',(#49826,#49832,#49833,#49834)); +#49826 = ORIENTED_EDGE('',*,*,#49827,.T.); +#49827 = EDGE_CURVE('',#45937,#46046,#49828,.T.); +#49828 = LINE('',#49829,#49830); +#49829 = CARTESIAN_POINT('',(-3.,-4.65,0.2)); +#49830 = VECTOR('',#49831,1.); +#49831 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49832 = ORIENTED_EDGE('',*,*,#46053,.T.); +#49833 = ORIENTED_EDGE('',*,*,#49810,.F.); +#49834 = ORIENTED_EDGE('',*,*,#45944,.F.); +#49835 = PLANE('',#49836); +#49836 = AXIS2_PLACEMENT_3D('',#49837,#49838,#49839); +#49837 = CARTESIAN_POINT('',(-3.,-4.65,0.2)); +#49838 = DIRECTION('',(0.,0.,-1.)); +#49839 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49840 = ADVANCED_FACE('',(#49841),#49852,.F.); +#49841 = FACE_BOUND('',#49842,.F.); +#49842 = EDGE_LOOP('',(#49843,#49849,#49850,#49851)); +#49843 = ORIENTED_EDGE('',*,*,#49844,.T.); +#49844 = EDGE_CURVE('',#45929,#46038,#49845,.T.); +#49845 = LINE('',#49846,#49847); +#49846 = CARTESIAN_POINT('',(-3.,-4.65,0.)); +#49847 = VECTOR('',#49848,1.); +#49848 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49849 = ORIENTED_EDGE('',*,*,#46045,.T.); +#49850 = ORIENTED_EDGE('',*,*,#49827,.F.); +#49851 = ORIENTED_EDGE('',*,*,#45936,.F.); +#49852 = PLANE('',#49853); +#49853 = AXIS2_PLACEMENT_3D('',#49854,#49855,#49856); +#49854 = CARTESIAN_POINT('',(-3.,-4.65,0.)); +#49855 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49856 = DIRECTION('',(0.,0.,1.)); +#49857 = ADVANCED_FACE('',(#49858),#49869,.F.); +#49858 = FACE_BOUND('',#49859,.F.); +#49859 = EDGE_LOOP('',(#49860,#49866,#49867,#49868)); +#49860 = ORIENTED_EDGE('',*,*,#49861,.T.); +#49861 = EDGE_CURVE('',#45920,#46029,#49862,.T.); +#49862 = LINE('',#49863,#49864); +#49863 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.)); +#49864 = VECTOR('',#49865,1.); +#49865 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49866 = ORIENTED_EDGE('',*,*,#46037,.T.); +#49867 = ORIENTED_EDGE('',*,*,#49844,.F.); +#49868 = ORIENTED_EDGE('',*,*,#45928,.F.); +#49869 = PLANE('',#49870); +#49870 = AXIS2_PLACEMENT_3D('',#49871,#49872,#49873); +#49871 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.)); +#49872 = DIRECTION('',(0.,0.,1.)); +#49873 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#49874 = ADVANCED_FACE('',(#49875),#49886,.T.); +#49875 = FACE_BOUND('',#49876,.T.); +#49876 = EDGE_LOOP('',(#49877,#49878,#49879,#49880)); +#49877 = ORIENTED_EDGE('',*,*,#45919,.T.); +#49878 = ORIENTED_EDGE('',*,*,#49861,.T.); +#49879 = ORIENTED_EDGE('',*,*,#46028,.F.); +#49880 = ORIENTED_EDGE('',*,*,#49881,.F.); +#49881 = EDGE_CURVE('',#45912,#46021,#49882,.T.); +#49882 = LINE('',#49883,#49884); +#49883 = CARTESIAN_POINT('',(-2.379496640897,-4.65,0.2479055467)); +#49884 = VECTOR('',#49885,1.); +#49885 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49886 = CYLINDRICAL_SURFACE('',#49887,0.3); +#49887 = AXIS2_PLACEMENT_3D('',#49888,#49889,#49890); +#49888 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.3)); +#49889 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#49890 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#49891 = ADVANCED_FACE('',(#49892),#49898,.F.); +#49892 = FACE_BOUND('',#49893,.F.); +#49893 = EDGE_LOOP('',(#49894,#49895,#49896,#49897)); +#49894 = ORIENTED_EDGE('',*,*,#46002,.T.); +#49895 = ORIENTED_EDGE('',*,*,#46020,.T.); +#49896 = ORIENTED_EDGE('',*,*,#49881,.F.); +#49897 = ORIENTED_EDGE('',*,*,#45911,.F.); +#49898 = PLANE('',#49899); +#49899 = AXIS2_PLACEMENT_3D('',#49900,#49901,#49902); +#49900 = CARTESIAN_POINT('',(-2.298480775301,-4.65,0.742364817767)); +#49901 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#49902 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#49903 = ADVANCED_FACE('',(#49904),#49915,.T.); +#49904 = FACE_BOUND('',#49905,.T.); +#49905 = EDGE_LOOP('',(#49906,#49907,#49908,#49909)); +#49906 = ORIENTED_EDGE('',*,*,#46192,.T.); +#49907 = ORIENTED_EDGE('',*,*,#49423,.T.); +#49908 = ORIENTED_EDGE('',*,*,#46301,.F.); +#49909 = ORIENTED_EDGE('',*,*,#49910,.F.); +#49910 = EDGE_CURVE('',#46185,#46294,#49911,.T.); +#49911 = LINE('',#49912,#49913); +#49912 = CARTESIAN_POINT('',(-2.495442325904,-3.38,0.7770944533)); +#49913 = VECTOR('',#49914,1.); +#49914 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49915 = CYLINDRICAL_SURFACE('',#49916,0.3); +#49916 = AXIS2_PLACEMENT_3D('',#49917,#49918,#49919); +#49917 = CARTESIAN_POINT('',(-2.2,-3.38,0.725)); +#49918 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#49919 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#49920 = ADVANCED_FACE('',(#49921),#49932,.F.); +#49921 = FACE_BOUND('',#49922,.F.); +#49922 = EDGE_LOOP('',(#49923,#49929,#49930,#49931)); +#49923 = ORIENTED_EDGE('',*,*,#49924,.T.); +#49924 = EDGE_CURVE('',#46176,#46285,#49925,.T.); +#49925 = LINE('',#49926,#49927); +#49926 = CARTESIAN_POINT('',(-2.5764581915,-3.38,0.282635182233)); +#49927 = VECTOR('',#49928,1.); +#49928 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49929 = ORIENTED_EDGE('',*,*,#46293,.T.); +#49930 = ORIENTED_EDGE('',*,*,#49910,.F.); +#49931 = ORIENTED_EDGE('',*,*,#46184,.F.); +#49932 = PLANE('',#49933); +#49933 = AXIS2_PLACEMENT_3D('',#49934,#49935,#49936); +#49934 = CARTESIAN_POINT('',(-2.5764581915,-3.38,0.282635182233)); +#49935 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#49936 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#49937 = ADVANCED_FACE('',(#49938),#49949,.F.); +#49938 = FACE_BOUND('',#49939,.F.); +#49939 = EDGE_LOOP('',(#49940,#49946,#49947,#49948)); +#49940 = ORIENTED_EDGE('',*,*,#49941,.T.); +#49941 = EDGE_CURVE('',#46168,#46277,#49942,.T.); +#49942 = LINE('',#49943,#49944); +#49943 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.2)); +#49944 = VECTOR('',#49945,1.); +#49945 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49946 = ORIENTED_EDGE('',*,*,#46284,.T.); +#49947 = ORIENTED_EDGE('',*,*,#49924,.F.); +#49948 = ORIENTED_EDGE('',*,*,#46175,.F.); +#49949 = CYLINDRICAL_SURFACE('',#49950,0.1); +#49950 = AXIS2_PLACEMENT_3D('',#49951,#49952,#49953); +#49951 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.3)); +#49952 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#49953 = DIRECTION('',(-0.,0.,-1.)); +#49954 = ADVANCED_FACE('',(#49955),#49966,.F.); +#49955 = FACE_BOUND('',#49956,.F.); +#49956 = EDGE_LOOP('',(#49957,#49963,#49964,#49965)); +#49957 = ORIENTED_EDGE('',*,*,#49958,.T.); +#49958 = EDGE_CURVE('',#46160,#46269,#49959,.T.); +#49959 = LINE('',#49960,#49961); +#49960 = CARTESIAN_POINT('',(-3.,-3.38,0.2)); +#49961 = VECTOR('',#49962,1.); +#49962 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49963 = ORIENTED_EDGE('',*,*,#46276,.T.); +#49964 = ORIENTED_EDGE('',*,*,#49941,.F.); +#49965 = ORIENTED_EDGE('',*,*,#46167,.F.); +#49966 = PLANE('',#49967); +#49967 = AXIS2_PLACEMENT_3D('',#49968,#49969,#49970); +#49968 = CARTESIAN_POINT('',(-3.,-3.38,0.2)); +#49969 = DIRECTION('',(0.,0.,-1.)); +#49970 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49971 = ADVANCED_FACE('',(#49972),#49983,.F.); +#49972 = FACE_BOUND('',#49973,.F.); +#49973 = EDGE_LOOP('',(#49974,#49980,#49981,#49982)); +#49974 = ORIENTED_EDGE('',*,*,#49975,.T.); +#49975 = EDGE_CURVE('',#46152,#46261,#49976,.T.); +#49976 = LINE('',#49977,#49978); +#49977 = CARTESIAN_POINT('',(-3.,-3.38,0.)); +#49978 = VECTOR('',#49979,1.); +#49979 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49980 = ORIENTED_EDGE('',*,*,#46268,.T.); +#49981 = ORIENTED_EDGE('',*,*,#49958,.F.); +#49982 = ORIENTED_EDGE('',*,*,#46159,.F.); +#49983 = PLANE('',#49984); +#49984 = AXIS2_PLACEMENT_3D('',#49985,#49986,#49987); +#49985 = CARTESIAN_POINT('',(-3.,-3.38,0.)); +#49986 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49987 = DIRECTION('',(0.,0.,1.)); +#49988 = ADVANCED_FACE('',(#49989),#50000,.F.); +#49989 = FACE_BOUND('',#49990,.F.); +#49990 = EDGE_LOOP('',(#49991,#49997,#49998,#49999)); +#49991 = ORIENTED_EDGE('',*,*,#49992,.T.); +#49992 = EDGE_CURVE('',#46143,#46252,#49993,.T.); +#49993 = LINE('',#49994,#49995); +#49994 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.)); +#49995 = VECTOR('',#49996,1.); +#49996 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49997 = ORIENTED_EDGE('',*,*,#46260,.T.); +#49998 = ORIENTED_EDGE('',*,*,#49975,.F.); +#49999 = ORIENTED_EDGE('',*,*,#46151,.F.); +#50000 = PLANE('',#50001); +#50001 = AXIS2_PLACEMENT_3D('',#50002,#50003,#50004); +#50002 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.)); +#50003 = DIRECTION('',(0.,0.,1.)); +#50004 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#50005 = ADVANCED_FACE('',(#50006),#50017,.T.); +#50006 = FACE_BOUND('',#50007,.T.); +#50007 = EDGE_LOOP('',(#50008,#50009,#50010,#50011)); +#50008 = ORIENTED_EDGE('',*,*,#46142,.T.); +#50009 = ORIENTED_EDGE('',*,*,#49992,.T.); +#50010 = ORIENTED_EDGE('',*,*,#46251,.F.); +#50011 = ORIENTED_EDGE('',*,*,#50012,.F.); +#50012 = EDGE_CURVE('',#46135,#46244,#50013,.T.); +#50013 = LINE('',#50014,#50015); +#50014 = CARTESIAN_POINT('',(-2.379496640897,-3.38,0.2479055467)); +#50015 = VECTOR('',#50016,1.); +#50016 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50017 = CYLINDRICAL_SURFACE('',#50018,0.3); +#50018 = AXIS2_PLACEMENT_3D('',#50019,#50020,#50021); +#50019 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.3)); +#50020 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50021 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#50022 = ADVANCED_FACE('',(#50023),#50029,.F.); +#50023 = FACE_BOUND('',#50024,.F.); +#50024 = EDGE_LOOP('',(#50025,#50026,#50027,#50028)); +#50025 = ORIENTED_EDGE('',*,*,#46225,.T.); +#50026 = ORIENTED_EDGE('',*,*,#46243,.T.); +#50027 = ORIENTED_EDGE('',*,*,#50012,.F.); +#50028 = ORIENTED_EDGE('',*,*,#46134,.F.); +#50029 = PLANE('',#50030); +#50030 = AXIS2_PLACEMENT_3D('',#50031,#50032,#50033); +#50031 = CARTESIAN_POINT('',(-2.298480775301,-3.38,0.742364817767)); +#50032 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#50033 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#50034 = ADVANCED_FACE('',(#50035),#50046,.T.); +#50035 = FACE_BOUND('',#50036,.T.); +#50036 = EDGE_LOOP('',(#50037,#50038,#50039,#50040)); +#50037 = ORIENTED_EDGE('',*,*,#46415,.T.); +#50038 = ORIENTED_EDGE('',*,*,#49442,.T.); +#50039 = ORIENTED_EDGE('',*,*,#46524,.F.); +#50040 = ORIENTED_EDGE('',*,*,#50041,.F.); +#50041 = EDGE_CURVE('',#46408,#46517,#50042,.T.); +#50042 = LINE('',#50043,#50044); +#50043 = CARTESIAN_POINT('',(-2.495442325904,-2.11,0.7770944533)); +#50044 = VECTOR('',#50045,1.); +#50045 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50046 = CYLINDRICAL_SURFACE('',#50047,0.3); +#50047 = AXIS2_PLACEMENT_3D('',#50048,#50049,#50050); +#50048 = CARTESIAN_POINT('',(-2.2,-2.11,0.725)); +#50049 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50050 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#50051 = ADVANCED_FACE('',(#50052),#50063,.F.); +#50052 = FACE_BOUND('',#50053,.F.); +#50053 = EDGE_LOOP('',(#50054,#50060,#50061,#50062)); +#50054 = ORIENTED_EDGE('',*,*,#50055,.T.); +#50055 = EDGE_CURVE('',#46399,#46508,#50056,.T.); +#50056 = LINE('',#50057,#50058); +#50057 = CARTESIAN_POINT('',(-2.5764581915,-2.11,0.282635182233)); +#50058 = VECTOR('',#50059,1.); +#50059 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50060 = ORIENTED_EDGE('',*,*,#46516,.T.); +#50061 = ORIENTED_EDGE('',*,*,#50041,.F.); +#50062 = ORIENTED_EDGE('',*,*,#46407,.F.); +#50063 = PLANE('',#50064); +#50064 = AXIS2_PLACEMENT_3D('',#50065,#50066,#50067); +#50065 = CARTESIAN_POINT('',(-2.5764581915,-2.11,0.282635182233)); +#50066 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#50067 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#50068 = ADVANCED_FACE('',(#50069),#50080,.F.); +#50069 = FACE_BOUND('',#50070,.F.); +#50070 = EDGE_LOOP('',(#50071,#50077,#50078,#50079)); +#50071 = ORIENTED_EDGE('',*,*,#50072,.T.); +#50072 = EDGE_CURVE('',#46391,#46500,#50073,.T.); +#50073 = LINE('',#50074,#50075); +#50074 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.2)); +#50075 = VECTOR('',#50076,1.); +#50076 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50077 = ORIENTED_EDGE('',*,*,#46507,.T.); +#50078 = ORIENTED_EDGE('',*,*,#50055,.F.); +#50079 = ORIENTED_EDGE('',*,*,#46398,.F.); +#50080 = CYLINDRICAL_SURFACE('',#50081,0.1); +#50081 = AXIS2_PLACEMENT_3D('',#50082,#50083,#50084); +#50082 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.3)); +#50083 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50084 = DIRECTION('',(-0.,0.,-1.)); +#50085 = ADVANCED_FACE('',(#50086),#50097,.F.); +#50086 = FACE_BOUND('',#50087,.F.); +#50087 = EDGE_LOOP('',(#50088,#50094,#50095,#50096)); +#50088 = ORIENTED_EDGE('',*,*,#50089,.T.); +#50089 = EDGE_CURVE('',#46383,#46492,#50090,.T.); +#50090 = LINE('',#50091,#50092); +#50091 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#50092 = VECTOR('',#50093,1.); +#50093 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50094 = ORIENTED_EDGE('',*,*,#46499,.T.); +#50095 = ORIENTED_EDGE('',*,*,#50072,.F.); +#50096 = ORIENTED_EDGE('',*,*,#46390,.F.); +#50097 = PLANE('',#50098); +#50098 = AXIS2_PLACEMENT_3D('',#50099,#50100,#50101); +#50099 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#50100 = DIRECTION('',(0.,0.,-1.)); +#50101 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50102 = ADVANCED_FACE('',(#50103),#50114,.F.); +#50103 = FACE_BOUND('',#50104,.F.); +#50104 = EDGE_LOOP('',(#50105,#50111,#50112,#50113)); +#50105 = ORIENTED_EDGE('',*,*,#50106,.T.); +#50106 = EDGE_CURVE('',#46375,#46484,#50107,.T.); +#50107 = LINE('',#50108,#50109); +#50108 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#50109 = VECTOR('',#50110,1.); +#50110 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50111 = ORIENTED_EDGE('',*,*,#46491,.T.); +#50112 = ORIENTED_EDGE('',*,*,#50089,.F.); +#50113 = ORIENTED_EDGE('',*,*,#46382,.F.); +#50114 = PLANE('',#50115); +#50115 = AXIS2_PLACEMENT_3D('',#50116,#50117,#50118); +#50116 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#50117 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50118 = DIRECTION('',(0.,0.,1.)); +#50119 = ADVANCED_FACE('',(#50120),#50131,.F.); +#50120 = FACE_BOUND('',#50121,.F.); +#50121 = EDGE_LOOP('',(#50122,#50128,#50129,#50130)); +#50122 = ORIENTED_EDGE('',*,*,#50123,.T.); +#50123 = EDGE_CURVE('',#46366,#46475,#50124,.T.); +#50124 = LINE('',#50125,#50126); +#50125 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.)); +#50126 = VECTOR('',#50127,1.); +#50127 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50128 = ORIENTED_EDGE('',*,*,#46483,.T.); +#50129 = ORIENTED_EDGE('',*,*,#50106,.F.); +#50130 = ORIENTED_EDGE('',*,*,#46374,.F.); +#50131 = PLANE('',#50132); +#50132 = AXIS2_PLACEMENT_3D('',#50133,#50134,#50135); +#50133 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.)); +#50134 = DIRECTION('',(0.,0.,1.)); +#50135 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#50136 = ADVANCED_FACE('',(#50137),#50148,.T.); +#50137 = FACE_BOUND('',#50138,.T.); +#50138 = EDGE_LOOP('',(#50139,#50140,#50141,#50142)); +#50139 = ORIENTED_EDGE('',*,*,#46365,.T.); +#50140 = ORIENTED_EDGE('',*,*,#50123,.T.); +#50141 = ORIENTED_EDGE('',*,*,#46474,.F.); +#50142 = ORIENTED_EDGE('',*,*,#50143,.F.); +#50143 = EDGE_CURVE('',#46358,#46467,#50144,.T.); +#50144 = LINE('',#50145,#50146); +#50145 = CARTESIAN_POINT('',(-2.379496640897,-2.11,0.2479055467)); +#50146 = VECTOR('',#50147,1.); +#50147 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50148 = CYLINDRICAL_SURFACE('',#50149,0.3); +#50149 = AXIS2_PLACEMENT_3D('',#50150,#50151,#50152); +#50150 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.3)); +#50151 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50152 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#50153 = ADVANCED_FACE('',(#50154),#50160,.F.); +#50154 = FACE_BOUND('',#50155,.F.); +#50155 = EDGE_LOOP('',(#50156,#50157,#50158,#50159)); +#50156 = ORIENTED_EDGE('',*,*,#46448,.T.); +#50157 = ORIENTED_EDGE('',*,*,#46466,.T.); +#50158 = ORIENTED_EDGE('',*,*,#50143,.F.); +#50159 = ORIENTED_EDGE('',*,*,#46357,.F.); +#50160 = PLANE('',#50161); +#50161 = AXIS2_PLACEMENT_3D('',#50162,#50163,#50164); +#50162 = CARTESIAN_POINT('',(-2.298480775301,-2.11,0.742364817767)); +#50163 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#50164 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#50165 = ADVANCED_FACE('',(#50166),#50177,.T.); +#50166 = FACE_BOUND('',#50167,.T.); +#50167 = EDGE_LOOP('',(#50168,#50169,#50170,#50171)); +#50168 = ORIENTED_EDGE('',*,*,#46638,.T.); +#50169 = ORIENTED_EDGE('',*,*,#49461,.T.); +#50170 = ORIENTED_EDGE('',*,*,#46747,.F.); +#50171 = ORIENTED_EDGE('',*,*,#50172,.F.); +#50172 = EDGE_CURVE('',#46631,#46740,#50173,.T.); +#50173 = LINE('',#50174,#50175); +#50174 = CARTESIAN_POINT('',(-2.495442325904,-0.84,0.7770944533)); +#50175 = VECTOR('',#50176,1.); +#50176 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50177 = CYLINDRICAL_SURFACE('',#50178,0.3); +#50178 = AXIS2_PLACEMENT_3D('',#50179,#50180,#50181); +#50179 = CARTESIAN_POINT('',(-2.2,-0.84,0.725)); +#50180 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50181 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#50182 = ADVANCED_FACE('',(#50183),#50194,.F.); +#50183 = FACE_BOUND('',#50184,.F.); +#50184 = EDGE_LOOP('',(#50185,#50191,#50192,#50193)); +#50185 = ORIENTED_EDGE('',*,*,#50186,.T.); +#50186 = EDGE_CURVE('',#46622,#46731,#50187,.T.); +#50187 = LINE('',#50188,#50189); +#50188 = CARTESIAN_POINT('',(-2.5764581915,-0.84,0.282635182233)); +#50189 = VECTOR('',#50190,1.); +#50190 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50191 = ORIENTED_EDGE('',*,*,#46739,.T.); +#50192 = ORIENTED_EDGE('',*,*,#50172,.F.); +#50193 = ORIENTED_EDGE('',*,*,#46630,.F.); +#50194 = PLANE('',#50195); +#50195 = AXIS2_PLACEMENT_3D('',#50196,#50197,#50198); +#50196 = CARTESIAN_POINT('',(-2.5764581915,-0.84,0.282635182233)); +#50197 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#50198 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#50199 = ADVANCED_FACE('',(#50200),#50211,.F.); +#50200 = FACE_BOUND('',#50201,.F.); +#50201 = EDGE_LOOP('',(#50202,#50208,#50209,#50210)); +#50202 = ORIENTED_EDGE('',*,*,#50203,.T.); +#50203 = EDGE_CURVE('',#46614,#46723,#50204,.T.); +#50204 = LINE('',#50205,#50206); +#50205 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.2)); +#50206 = VECTOR('',#50207,1.); +#50207 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50208 = ORIENTED_EDGE('',*,*,#46730,.T.); +#50209 = ORIENTED_EDGE('',*,*,#50186,.F.); +#50210 = ORIENTED_EDGE('',*,*,#46621,.F.); +#50211 = CYLINDRICAL_SURFACE('',#50212,0.1); +#50212 = AXIS2_PLACEMENT_3D('',#50213,#50214,#50215); +#50213 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.3)); +#50214 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50215 = DIRECTION('',(-0.,0.,-1.)); +#50216 = ADVANCED_FACE('',(#50217),#50228,.F.); +#50217 = FACE_BOUND('',#50218,.F.); +#50218 = EDGE_LOOP('',(#50219,#50225,#50226,#50227)); +#50219 = ORIENTED_EDGE('',*,*,#50220,.T.); +#50220 = EDGE_CURVE('',#46606,#46715,#50221,.T.); +#50221 = LINE('',#50222,#50223); +#50222 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#50223 = VECTOR('',#50224,1.); +#50224 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50225 = ORIENTED_EDGE('',*,*,#46722,.T.); +#50226 = ORIENTED_EDGE('',*,*,#50203,.F.); +#50227 = ORIENTED_EDGE('',*,*,#46613,.F.); +#50228 = PLANE('',#50229); +#50229 = AXIS2_PLACEMENT_3D('',#50230,#50231,#50232); +#50230 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#50231 = DIRECTION('',(0.,0.,-1.)); +#50232 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50233 = ADVANCED_FACE('',(#50234),#50245,.F.); +#50234 = FACE_BOUND('',#50235,.F.); +#50235 = EDGE_LOOP('',(#50236,#50242,#50243,#50244)); +#50236 = ORIENTED_EDGE('',*,*,#50237,.T.); +#50237 = EDGE_CURVE('',#46598,#46707,#50238,.T.); +#50238 = LINE('',#50239,#50240); +#50239 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#50240 = VECTOR('',#50241,1.); +#50241 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50242 = ORIENTED_EDGE('',*,*,#46714,.T.); +#50243 = ORIENTED_EDGE('',*,*,#50220,.F.); +#50244 = ORIENTED_EDGE('',*,*,#46605,.F.); +#50245 = PLANE('',#50246); +#50246 = AXIS2_PLACEMENT_3D('',#50247,#50248,#50249); +#50247 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#50248 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50249 = DIRECTION('',(0.,0.,1.)); +#50250 = ADVANCED_FACE('',(#50251),#50262,.F.); +#50251 = FACE_BOUND('',#50252,.F.); +#50252 = EDGE_LOOP('',(#50253,#50259,#50260,#50261)); +#50253 = ORIENTED_EDGE('',*,*,#50254,.T.); +#50254 = EDGE_CURVE('',#46589,#46698,#50255,.T.); +#50255 = LINE('',#50256,#50257); +#50256 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.)); +#50257 = VECTOR('',#50258,1.); +#50258 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50259 = ORIENTED_EDGE('',*,*,#46706,.T.); +#50260 = ORIENTED_EDGE('',*,*,#50237,.F.); +#50261 = ORIENTED_EDGE('',*,*,#46597,.F.); +#50262 = PLANE('',#50263); +#50263 = AXIS2_PLACEMENT_3D('',#50264,#50265,#50266); +#50264 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.)); +#50265 = DIRECTION('',(0.,0.,1.)); +#50266 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#50267 = ADVANCED_FACE('',(#50268),#50279,.T.); +#50268 = FACE_BOUND('',#50269,.T.); +#50269 = EDGE_LOOP('',(#50270,#50271,#50272,#50273)); +#50270 = ORIENTED_EDGE('',*,*,#46588,.T.); +#50271 = ORIENTED_EDGE('',*,*,#50254,.T.); +#50272 = ORIENTED_EDGE('',*,*,#46697,.F.); +#50273 = ORIENTED_EDGE('',*,*,#50274,.F.); +#50274 = EDGE_CURVE('',#46581,#46690,#50275,.T.); +#50275 = LINE('',#50276,#50277); +#50276 = CARTESIAN_POINT('',(-2.379496640897,-0.84,0.2479055467)); +#50277 = VECTOR('',#50278,1.); +#50278 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50279 = CYLINDRICAL_SURFACE('',#50280,0.3); +#50280 = AXIS2_PLACEMENT_3D('',#50281,#50282,#50283); +#50281 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.3)); +#50282 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50283 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#50284 = ADVANCED_FACE('',(#50285),#50291,.F.); +#50285 = FACE_BOUND('',#50286,.F.); +#50286 = EDGE_LOOP('',(#50287,#50288,#50289,#50290)); +#50287 = ORIENTED_EDGE('',*,*,#46671,.T.); +#50288 = ORIENTED_EDGE('',*,*,#46689,.T.); +#50289 = ORIENTED_EDGE('',*,*,#50274,.F.); +#50290 = ORIENTED_EDGE('',*,*,#46580,.F.); +#50291 = PLANE('',#50292); +#50292 = AXIS2_PLACEMENT_3D('',#50293,#50294,#50295); +#50293 = CARTESIAN_POINT('',(-2.298480775301,-0.84,0.742364817767)); +#50294 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#50295 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#50296 = ADVANCED_FACE('',(#50297),#50308,.T.); +#50297 = FACE_BOUND('',#50298,.T.); +#50298 = EDGE_LOOP('',(#50299,#50300,#50301,#50302)); +#50299 = ORIENTED_EDGE('',*,*,#46861,.T.); +#50300 = ORIENTED_EDGE('',*,*,#49480,.T.); +#50301 = ORIENTED_EDGE('',*,*,#46970,.F.); +#50302 = ORIENTED_EDGE('',*,*,#50303,.F.); +#50303 = EDGE_CURVE('',#46854,#46963,#50304,.T.); +#50304 = LINE('',#50305,#50306); +#50305 = CARTESIAN_POINT('',(-2.495442325904,0.43,0.7770944533)); +#50306 = VECTOR('',#50307,1.); +#50307 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50308 = CYLINDRICAL_SURFACE('',#50309,0.3); +#50309 = AXIS2_PLACEMENT_3D('',#50310,#50311,#50312); +#50310 = CARTESIAN_POINT('',(-2.2,0.43,0.725)); +#50311 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50312 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#50313 = ADVANCED_FACE('',(#50314),#50325,.F.); +#50314 = FACE_BOUND('',#50315,.F.); +#50315 = EDGE_LOOP('',(#50316,#50322,#50323,#50324)); +#50316 = ORIENTED_EDGE('',*,*,#50317,.T.); +#50317 = EDGE_CURVE('',#46845,#46954,#50318,.T.); +#50318 = LINE('',#50319,#50320); +#50319 = CARTESIAN_POINT('',(-2.5764581915,0.43,0.282635182233)); +#50320 = VECTOR('',#50321,1.); +#50321 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50322 = ORIENTED_EDGE('',*,*,#46962,.T.); +#50323 = ORIENTED_EDGE('',*,*,#50303,.F.); +#50324 = ORIENTED_EDGE('',*,*,#46853,.F.); +#50325 = PLANE('',#50326); +#50326 = AXIS2_PLACEMENT_3D('',#50327,#50328,#50329); +#50327 = CARTESIAN_POINT('',(-2.5764581915,0.43,0.282635182233)); +#50328 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#50329 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#50330 = ADVANCED_FACE('',(#50331),#50342,.F.); +#50331 = FACE_BOUND('',#50332,.F.); +#50332 = EDGE_LOOP('',(#50333,#50339,#50340,#50341)); +#50333 = ORIENTED_EDGE('',*,*,#50334,.T.); +#50334 = EDGE_CURVE('',#46837,#46946,#50335,.T.); +#50335 = LINE('',#50336,#50337); +#50336 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.2)); +#50337 = VECTOR('',#50338,1.); +#50338 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50339 = ORIENTED_EDGE('',*,*,#46953,.T.); +#50340 = ORIENTED_EDGE('',*,*,#50317,.F.); +#50341 = ORIENTED_EDGE('',*,*,#46844,.F.); +#50342 = CYLINDRICAL_SURFACE('',#50343,0.1); +#50343 = AXIS2_PLACEMENT_3D('',#50344,#50345,#50346); +#50344 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.3)); +#50345 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50346 = DIRECTION('',(-0.,0.,-1.)); +#50347 = ADVANCED_FACE('',(#50348),#50359,.F.); +#50348 = FACE_BOUND('',#50349,.F.); +#50349 = EDGE_LOOP('',(#50350,#50356,#50357,#50358)); +#50350 = ORIENTED_EDGE('',*,*,#50351,.T.); +#50351 = EDGE_CURVE('',#46829,#46938,#50352,.T.); +#50352 = LINE('',#50353,#50354); +#50353 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#50354 = VECTOR('',#50355,1.); +#50355 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50356 = ORIENTED_EDGE('',*,*,#46945,.T.); +#50357 = ORIENTED_EDGE('',*,*,#50334,.F.); +#50358 = ORIENTED_EDGE('',*,*,#46836,.F.); +#50359 = PLANE('',#50360); +#50360 = AXIS2_PLACEMENT_3D('',#50361,#50362,#50363); +#50361 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#50362 = DIRECTION('',(0.,0.,-1.)); +#50363 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50364 = ADVANCED_FACE('',(#50365),#50376,.F.); +#50365 = FACE_BOUND('',#50366,.F.); +#50366 = EDGE_LOOP('',(#50367,#50373,#50374,#50375)); +#50367 = ORIENTED_EDGE('',*,*,#50368,.T.); +#50368 = EDGE_CURVE('',#46821,#46930,#50369,.T.); +#50369 = LINE('',#50370,#50371); +#50370 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#50371 = VECTOR('',#50372,1.); +#50372 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50373 = ORIENTED_EDGE('',*,*,#46937,.T.); +#50374 = ORIENTED_EDGE('',*,*,#50351,.F.); +#50375 = ORIENTED_EDGE('',*,*,#46828,.F.); +#50376 = PLANE('',#50377); +#50377 = AXIS2_PLACEMENT_3D('',#50378,#50379,#50380); +#50378 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#50379 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50380 = DIRECTION('',(0.,0.,1.)); +#50381 = ADVANCED_FACE('',(#50382),#50393,.F.); +#50382 = FACE_BOUND('',#50383,.F.); +#50383 = EDGE_LOOP('',(#50384,#50390,#50391,#50392)); +#50384 = ORIENTED_EDGE('',*,*,#50385,.T.); +#50385 = EDGE_CURVE('',#46812,#46921,#50386,.T.); +#50386 = LINE('',#50387,#50388); +#50387 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.)); +#50388 = VECTOR('',#50389,1.); +#50389 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50390 = ORIENTED_EDGE('',*,*,#46929,.T.); +#50391 = ORIENTED_EDGE('',*,*,#50368,.F.); +#50392 = ORIENTED_EDGE('',*,*,#46820,.F.); +#50393 = PLANE('',#50394); +#50394 = AXIS2_PLACEMENT_3D('',#50395,#50396,#50397); +#50395 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.)); +#50396 = DIRECTION('',(0.,0.,1.)); +#50397 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#50398 = ADVANCED_FACE('',(#50399),#50410,.T.); +#50399 = FACE_BOUND('',#50400,.T.); +#50400 = EDGE_LOOP('',(#50401,#50402,#50403,#50404)); +#50401 = ORIENTED_EDGE('',*,*,#46811,.T.); +#50402 = ORIENTED_EDGE('',*,*,#50385,.T.); +#50403 = ORIENTED_EDGE('',*,*,#46920,.F.); +#50404 = ORIENTED_EDGE('',*,*,#50405,.F.); +#50405 = EDGE_CURVE('',#46804,#46913,#50406,.T.); +#50406 = LINE('',#50407,#50408); +#50407 = CARTESIAN_POINT('',(-2.379496640897,0.43,0.2479055467)); +#50408 = VECTOR('',#50409,1.); +#50409 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50410 = CYLINDRICAL_SURFACE('',#50411,0.3); +#50411 = AXIS2_PLACEMENT_3D('',#50412,#50413,#50414); +#50412 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.3)); +#50413 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50414 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#50415 = ADVANCED_FACE('',(#50416),#50422,.F.); +#50416 = FACE_BOUND('',#50417,.F.); +#50417 = EDGE_LOOP('',(#50418,#50419,#50420,#50421)); +#50418 = ORIENTED_EDGE('',*,*,#46894,.T.); +#50419 = ORIENTED_EDGE('',*,*,#46912,.T.); +#50420 = ORIENTED_EDGE('',*,*,#50405,.F.); +#50421 = ORIENTED_EDGE('',*,*,#46803,.F.); +#50422 = PLANE('',#50423); +#50423 = AXIS2_PLACEMENT_3D('',#50424,#50425,#50426); +#50424 = CARTESIAN_POINT('',(-2.298480775301,0.43,0.742364817767)); +#50425 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#50426 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#50427 = ADVANCED_FACE('',(#50428),#50439,.T.); +#50428 = FACE_BOUND('',#50429,.T.); +#50429 = EDGE_LOOP('',(#50430,#50431,#50432,#50433)); +#50430 = ORIENTED_EDGE('',*,*,#47084,.T.); +#50431 = ORIENTED_EDGE('',*,*,#49499,.T.); +#50432 = ORIENTED_EDGE('',*,*,#47193,.F.); +#50433 = ORIENTED_EDGE('',*,*,#50434,.F.); +#50434 = EDGE_CURVE('',#47077,#47186,#50435,.T.); +#50435 = LINE('',#50436,#50437); +#50436 = CARTESIAN_POINT('',(-2.495442325904,1.7,0.7770944533)); +#50437 = VECTOR('',#50438,1.); +#50438 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50439 = CYLINDRICAL_SURFACE('',#50440,0.3); +#50440 = AXIS2_PLACEMENT_3D('',#50441,#50442,#50443); +#50441 = CARTESIAN_POINT('',(-2.2,1.7,0.725)); +#50442 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50443 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#50444 = ADVANCED_FACE('',(#50445),#50456,.F.); +#50445 = FACE_BOUND('',#50446,.F.); +#50446 = EDGE_LOOP('',(#50447,#50453,#50454,#50455)); +#50447 = ORIENTED_EDGE('',*,*,#50448,.T.); +#50448 = EDGE_CURVE('',#47068,#47177,#50449,.T.); +#50449 = LINE('',#50450,#50451); +#50450 = CARTESIAN_POINT('',(-2.5764581915,1.7,0.282635182233)); +#50451 = VECTOR('',#50452,1.); +#50452 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50453 = ORIENTED_EDGE('',*,*,#47185,.T.); +#50454 = ORIENTED_EDGE('',*,*,#50434,.F.); +#50455 = ORIENTED_EDGE('',*,*,#47076,.F.); +#50456 = PLANE('',#50457); +#50457 = AXIS2_PLACEMENT_3D('',#50458,#50459,#50460); +#50458 = CARTESIAN_POINT('',(-2.5764581915,1.7,0.282635182233)); +#50459 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#50460 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#50461 = ADVANCED_FACE('',(#50462),#50473,.F.); +#50462 = FACE_BOUND('',#50463,.F.); +#50463 = EDGE_LOOP('',(#50464,#50470,#50471,#50472)); +#50464 = ORIENTED_EDGE('',*,*,#50465,.T.); +#50465 = EDGE_CURVE('',#47060,#47169,#50466,.T.); +#50466 = LINE('',#50467,#50468); +#50467 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.2)); +#50468 = VECTOR('',#50469,1.); +#50469 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50470 = ORIENTED_EDGE('',*,*,#47176,.T.); +#50471 = ORIENTED_EDGE('',*,*,#50448,.F.); +#50472 = ORIENTED_EDGE('',*,*,#47067,.F.); +#50473 = CYLINDRICAL_SURFACE('',#50474,0.1); +#50474 = AXIS2_PLACEMENT_3D('',#50475,#50476,#50477); +#50475 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.3)); +#50476 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50477 = DIRECTION('',(-0.,0.,-1.)); +#50478 = ADVANCED_FACE('',(#50479),#50490,.F.); +#50479 = FACE_BOUND('',#50480,.F.); +#50480 = EDGE_LOOP('',(#50481,#50487,#50488,#50489)); +#50481 = ORIENTED_EDGE('',*,*,#50482,.T.); +#50482 = EDGE_CURVE('',#47052,#47161,#50483,.T.); +#50483 = LINE('',#50484,#50485); +#50484 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#50485 = VECTOR('',#50486,1.); +#50486 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50487 = ORIENTED_EDGE('',*,*,#47168,.T.); +#50488 = ORIENTED_EDGE('',*,*,#50465,.F.); +#50489 = ORIENTED_EDGE('',*,*,#47059,.F.); +#50490 = PLANE('',#50491); +#50491 = AXIS2_PLACEMENT_3D('',#50492,#50493,#50494); +#50492 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#50493 = DIRECTION('',(0.,0.,-1.)); +#50494 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50495 = ADVANCED_FACE('',(#50496),#50507,.F.); +#50496 = FACE_BOUND('',#50497,.F.); +#50497 = EDGE_LOOP('',(#50498,#50504,#50505,#50506)); +#50498 = ORIENTED_EDGE('',*,*,#50499,.T.); +#50499 = EDGE_CURVE('',#47044,#47153,#50500,.T.); +#50500 = LINE('',#50501,#50502); +#50501 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#50502 = VECTOR('',#50503,1.); +#50503 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50504 = ORIENTED_EDGE('',*,*,#47160,.T.); +#50505 = ORIENTED_EDGE('',*,*,#50482,.F.); +#50506 = ORIENTED_EDGE('',*,*,#47051,.F.); +#50507 = PLANE('',#50508); +#50508 = AXIS2_PLACEMENT_3D('',#50509,#50510,#50511); +#50509 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#50510 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50511 = DIRECTION('',(0.,0.,1.)); +#50512 = ADVANCED_FACE('',(#50513),#50524,.F.); +#50513 = FACE_BOUND('',#50514,.F.); +#50514 = EDGE_LOOP('',(#50515,#50521,#50522,#50523)); +#50515 = ORIENTED_EDGE('',*,*,#50516,.T.); +#50516 = EDGE_CURVE('',#47035,#47144,#50517,.T.); +#50517 = LINE('',#50518,#50519); +#50518 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.)); +#50519 = VECTOR('',#50520,1.); +#50520 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50521 = ORIENTED_EDGE('',*,*,#47152,.T.); +#50522 = ORIENTED_EDGE('',*,*,#50499,.F.); +#50523 = ORIENTED_EDGE('',*,*,#47043,.F.); +#50524 = PLANE('',#50525); +#50525 = AXIS2_PLACEMENT_3D('',#50526,#50527,#50528); +#50526 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.)); +#50527 = DIRECTION('',(0.,0.,1.)); +#50528 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#50529 = ADVANCED_FACE('',(#50530),#50541,.T.); +#50530 = FACE_BOUND('',#50531,.T.); +#50531 = EDGE_LOOP('',(#50532,#50533,#50534,#50535)); +#50532 = ORIENTED_EDGE('',*,*,#47034,.T.); +#50533 = ORIENTED_EDGE('',*,*,#50516,.T.); +#50534 = ORIENTED_EDGE('',*,*,#47143,.F.); +#50535 = ORIENTED_EDGE('',*,*,#50536,.F.); +#50536 = EDGE_CURVE('',#47027,#47136,#50537,.T.); +#50537 = LINE('',#50538,#50539); +#50538 = CARTESIAN_POINT('',(-2.379496640897,1.7,0.2479055467)); +#50539 = VECTOR('',#50540,1.); +#50540 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50541 = CYLINDRICAL_SURFACE('',#50542,0.3); +#50542 = AXIS2_PLACEMENT_3D('',#50543,#50544,#50545); +#50543 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.3)); +#50544 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50545 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#50546 = ADVANCED_FACE('',(#50547),#50553,.F.); +#50547 = FACE_BOUND('',#50548,.F.); +#50548 = EDGE_LOOP('',(#50549,#50550,#50551,#50552)); +#50549 = ORIENTED_EDGE('',*,*,#47117,.T.); +#50550 = ORIENTED_EDGE('',*,*,#47135,.T.); +#50551 = ORIENTED_EDGE('',*,*,#50536,.F.); +#50552 = ORIENTED_EDGE('',*,*,#47026,.F.); +#50553 = PLANE('',#50554); +#50554 = AXIS2_PLACEMENT_3D('',#50555,#50556,#50557); +#50555 = CARTESIAN_POINT('',(-2.298480775301,1.7,0.742364817767)); +#50556 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#50557 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#50558 = ADVANCED_FACE('',(#50559),#50570,.T.); +#50559 = FACE_BOUND('',#50560,.T.); +#50560 = EDGE_LOOP('',(#50561,#50562,#50563,#50564)); +#50561 = ORIENTED_EDGE('',*,*,#47307,.T.); +#50562 = ORIENTED_EDGE('',*,*,#49518,.T.); +#50563 = ORIENTED_EDGE('',*,*,#47416,.F.); +#50564 = ORIENTED_EDGE('',*,*,#50565,.F.); +#50565 = EDGE_CURVE('',#47300,#47409,#50566,.T.); +#50566 = LINE('',#50567,#50568); +#50567 = CARTESIAN_POINT('',(-2.495442325904,2.97,0.7770944533)); +#50568 = VECTOR('',#50569,1.); +#50569 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50570 = CYLINDRICAL_SURFACE('',#50571,0.3); +#50571 = AXIS2_PLACEMENT_3D('',#50572,#50573,#50574); +#50572 = CARTESIAN_POINT('',(-2.2,2.97,0.725)); +#50573 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50574 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#50575 = ADVANCED_FACE('',(#50576),#50587,.F.); +#50576 = FACE_BOUND('',#50577,.F.); +#50577 = EDGE_LOOP('',(#50578,#50584,#50585,#50586)); +#50578 = ORIENTED_EDGE('',*,*,#50579,.T.); +#50579 = EDGE_CURVE('',#47291,#47400,#50580,.T.); +#50580 = LINE('',#50581,#50582); +#50581 = CARTESIAN_POINT('',(-2.5764581915,2.97,0.282635182233)); +#50582 = VECTOR('',#50583,1.); +#50583 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50584 = ORIENTED_EDGE('',*,*,#47408,.T.); +#50585 = ORIENTED_EDGE('',*,*,#50565,.F.); +#50586 = ORIENTED_EDGE('',*,*,#47299,.F.); +#50587 = PLANE('',#50588); +#50588 = AXIS2_PLACEMENT_3D('',#50589,#50590,#50591); +#50589 = CARTESIAN_POINT('',(-2.5764581915,2.97,0.282635182233)); +#50590 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#50591 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#50592 = ADVANCED_FACE('',(#50593),#50604,.F.); +#50593 = FACE_BOUND('',#50594,.F.); +#50594 = EDGE_LOOP('',(#50595,#50601,#50602,#50603)); +#50595 = ORIENTED_EDGE('',*,*,#50596,.T.); +#50596 = EDGE_CURVE('',#47283,#47392,#50597,.T.); +#50597 = LINE('',#50598,#50599); +#50598 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.2)); +#50599 = VECTOR('',#50600,1.); +#50600 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50601 = ORIENTED_EDGE('',*,*,#47399,.T.); +#50602 = ORIENTED_EDGE('',*,*,#50579,.F.); +#50603 = ORIENTED_EDGE('',*,*,#47290,.F.); +#50604 = CYLINDRICAL_SURFACE('',#50605,0.1); +#50605 = AXIS2_PLACEMENT_3D('',#50606,#50607,#50608); +#50606 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.3)); +#50607 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50608 = DIRECTION('',(-0.,0.,-1.)); +#50609 = ADVANCED_FACE('',(#50610),#50621,.F.); +#50610 = FACE_BOUND('',#50611,.F.); +#50611 = EDGE_LOOP('',(#50612,#50618,#50619,#50620)); +#50612 = ORIENTED_EDGE('',*,*,#50613,.T.); +#50613 = EDGE_CURVE('',#47275,#47384,#50614,.T.); +#50614 = LINE('',#50615,#50616); +#50615 = CARTESIAN_POINT('',(-3.,2.97,0.2)); +#50616 = VECTOR('',#50617,1.); +#50617 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50618 = ORIENTED_EDGE('',*,*,#47391,.T.); +#50619 = ORIENTED_EDGE('',*,*,#50596,.F.); +#50620 = ORIENTED_EDGE('',*,*,#47282,.F.); +#50621 = PLANE('',#50622); +#50622 = AXIS2_PLACEMENT_3D('',#50623,#50624,#50625); +#50623 = CARTESIAN_POINT('',(-3.,2.97,0.2)); +#50624 = DIRECTION('',(0.,0.,-1.)); +#50625 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50626 = ADVANCED_FACE('',(#50627),#50638,.F.); +#50627 = FACE_BOUND('',#50628,.F.); +#50628 = EDGE_LOOP('',(#50629,#50635,#50636,#50637)); +#50629 = ORIENTED_EDGE('',*,*,#50630,.T.); +#50630 = EDGE_CURVE('',#47267,#47376,#50631,.T.); +#50631 = LINE('',#50632,#50633); +#50632 = CARTESIAN_POINT('',(-3.,2.97,0.)); +#50633 = VECTOR('',#50634,1.); +#50634 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50635 = ORIENTED_EDGE('',*,*,#47383,.T.); +#50636 = ORIENTED_EDGE('',*,*,#50613,.F.); +#50637 = ORIENTED_EDGE('',*,*,#47274,.F.); +#50638 = PLANE('',#50639); +#50639 = AXIS2_PLACEMENT_3D('',#50640,#50641,#50642); +#50640 = CARTESIAN_POINT('',(-3.,2.97,0.)); +#50641 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50642 = DIRECTION('',(0.,0.,1.)); +#50643 = ADVANCED_FACE('',(#50644),#50655,.F.); +#50644 = FACE_BOUND('',#50645,.F.); +#50645 = EDGE_LOOP('',(#50646,#50652,#50653,#50654)); +#50646 = ORIENTED_EDGE('',*,*,#50647,.T.); +#50647 = EDGE_CURVE('',#47258,#47367,#50648,.T.); +#50648 = LINE('',#50649,#50650); +#50649 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.)); +#50650 = VECTOR('',#50651,1.); +#50651 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50652 = ORIENTED_EDGE('',*,*,#47375,.T.); +#50653 = ORIENTED_EDGE('',*,*,#50630,.F.); +#50654 = ORIENTED_EDGE('',*,*,#47266,.F.); +#50655 = PLANE('',#50656); +#50656 = AXIS2_PLACEMENT_3D('',#50657,#50658,#50659); +#50657 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.)); +#50658 = DIRECTION('',(0.,0.,1.)); +#50659 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#50660 = ADVANCED_FACE('',(#50661),#50672,.T.); +#50661 = FACE_BOUND('',#50662,.T.); +#50662 = EDGE_LOOP('',(#50663,#50664,#50665,#50666)); +#50663 = ORIENTED_EDGE('',*,*,#47257,.T.); +#50664 = ORIENTED_EDGE('',*,*,#50647,.T.); +#50665 = ORIENTED_EDGE('',*,*,#47366,.F.); +#50666 = ORIENTED_EDGE('',*,*,#50667,.F.); +#50667 = EDGE_CURVE('',#47250,#47359,#50668,.T.); +#50668 = LINE('',#50669,#50670); +#50669 = CARTESIAN_POINT('',(-2.379496640897,2.97,0.2479055467)); +#50670 = VECTOR('',#50671,1.); +#50671 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50672 = CYLINDRICAL_SURFACE('',#50673,0.3); +#50673 = AXIS2_PLACEMENT_3D('',#50674,#50675,#50676); +#50674 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.3)); +#50675 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50676 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#50677 = ADVANCED_FACE('',(#50678),#50684,.F.); +#50678 = FACE_BOUND('',#50679,.F.); +#50679 = EDGE_LOOP('',(#50680,#50681,#50682,#50683)); +#50680 = ORIENTED_EDGE('',*,*,#47340,.T.); +#50681 = ORIENTED_EDGE('',*,*,#47358,.T.); +#50682 = ORIENTED_EDGE('',*,*,#50667,.F.); +#50683 = ORIENTED_EDGE('',*,*,#47249,.F.); +#50684 = PLANE('',#50685); +#50685 = AXIS2_PLACEMENT_3D('',#50686,#50687,#50688); +#50686 = CARTESIAN_POINT('',(-2.298480775301,2.97,0.742364817767)); +#50687 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#50688 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#50689 = ADVANCED_FACE('',(#50690),#50701,.F.); +#50690 = FACE_BOUND('',#50691,.F.); +#50691 = EDGE_LOOP('',(#50692,#50698,#50699,#50700)); +#50692 = ORIENTED_EDGE('',*,*,#50693,.T.); +#50693 = EDGE_CURVE('',#47509,#47611,#50694,.T.); +#50694 = LINE('',#50695,#50696); +#50695 = CARTESIAN_POINT('',(-2.5764581915,4.24,0.282635182233)); +#50696 = VECTOR('',#50697,1.); +#50697 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50698 = ORIENTED_EDGE('',*,*,#47619,.T.); +#50699 = ORIENTED_EDGE('',*,*,#49389,.F.); +#50700 = ORIENTED_EDGE('',*,*,#47517,.F.); +#50701 = PLANE('',#50702); +#50702 = AXIS2_PLACEMENT_3D('',#50703,#50704,#50705); +#50703 = CARTESIAN_POINT('',(-2.5764581915,4.24,0.282635182233)); +#50704 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#50705 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#50706 = ADVANCED_FACE('',(#50707),#50718,.F.); +#50707 = FACE_BOUND('',#50708,.F.); +#50708 = EDGE_LOOP('',(#50709,#50715,#50716,#50717)); +#50709 = ORIENTED_EDGE('',*,*,#50710,.T.); +#50710 = EDGE_CURVE('',#47501,#47603,#50711,.T.); +#50711 = LINE('',#50712,#50713); +#50712 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.2)); +#50713 = VECTOR('',#50714,1.); +#50714 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50715 = ORIENTED_EDGE('',*,*,#47610,.T.); +#50716 = ORIENTED_EDGE('',*,*,#50693,.F.); +#50717 = ORIENTED_EDGE('',*,*,#47508,.F.); +#50718 = CYLINDRICAL_SURFACE('',#50719,0.1); +#50719 = AXIS2_PLACEMENT_3D('',#50720,#50721,#50722); +#50720 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.3)); +#50721 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50722 = DIRECTION('',(-0.,0.,-1.)); +#50723 = ADVANCED_FACE('',(#50724),#50735,.F.); +#50724 = FACE_BOUND('',#50725,.F.); +#50725 = EDGE_LOOP('',(#50726,#50732,#50733,#50734)); +#50726 = ORIENTED_EDGE('',*,*,#50727,.T.); +#50727 = EDGE_CURVE('',#47493,#47595,#50728,.T.); +#50728 = LINE('',#50729,#50730); +#50729 = CARTESIAN_POINT('',(-3.,4.24,0.2)); +#50730 = VECTOR('',#50731,1.); +#50731 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50732 = ORIENTED_EDGE('',*,*,#47602,.T.); +#50733 = ORIENTED_EDGE('',*,*,#50710,.F.); +#50734 = ORIENTED_EDGE('',*,*,#47500,.F.); +#50735 = PLANE('',#50736); +#50736 = AXIS2_PLACEMENT_3D('',#50737,#50738,#50739); +#50737 = CARTESIAN_POINT('',(-3.,4.24,0.2)); +#50738 = DIRECTION('',(0.,0.,-1.)); +#50739 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50740 = ADVANCED_FACE('',(#50741),#50752,.F.); +#50741 = FACE_BOUND('',#50742,.F.); +#50742 = EDGE_LOOP('',(#50743,#50749,#50750,#50751)); +#50743 = ORIENTED_EDGE('',*,*,#50744,.T.); +#50744 = EDGE_CURVE('',#47485,#47587,#50745,.T.); +#50745 = LINE('',#50746,#50747); +#50746 = CARTESIAN_POINT('',(-3.,4.24,0.)); +#50747 = VECTOR('',#50748,1.); +#50748 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50749 = ORIENTED_EDGE('',*,*,#47594,.T.); +#50750 = ORIENTED_EDGE('',*,*,#50727,.F.); +#50751 = ORIENTED_EDGE('',*,*,#47492,.F.); +#50752 = PLANE('',#50753); +#50753 = AXIS2_PLACEMENT_3D('',#50754,#50755,#50756); +#50754 = CARTESIAN_POINT('',(-3.,4.24,0.)); +#50755 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#50756 = DIRECTION('',(0.,0.,1.)); +#50757 = ADVANCED_FACE('',(#50758),#50769,.F.); +#50758 = FACE_BOUND('',#50759,.F.); +#50759 = EDGE_LOOP('',(#50760,#50766,#50767,#50768)); +#50760 = ORIENTED_EDGE('',*,*,#50761,.T.); +#50761 = EDGE_CURVE('',#47476,#47578,#50762,.T.); +#50762 = LINE('',#50763,#50764); +#50763 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.)); +#50764 = VECTOR('',#50765,1.); +#50765 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50766 = ORIENTED_EDGE('',*,*,#47586,.T.); +#50767 = ORIENTED_EDGE('',*,*,#50744,.F.); +#50768 = ORIENTED_EDGE('',*,*,#47484,.F.); +#50769 = PLANE('',#50770); +#50770 = AXIS2_PLACEMENT_3D('',#50771,#50772,#50773); +#50771 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.)); +#50772 = DIRECTION('',(0.,0.,1.)); +#50773 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#50774 = ADVANCED_FACE('',(#50775),#50786,.T.); +#50775 = FACE_BOUND('',#50776,.T.); +#50776 = EDGE_LOOP('',(#50777,#50778,#50779,#50780)); +#50777 = ORIENTED_EDGE('',*,*,#47475,.T.); +#50778 = ORIENTED_EDGE('',*,*,#50761,.T.); +#50779 = ORIENTED_EDGE('',*,*,#47577,.F.); +#50780 = ORIENTED_EDGE('',*,*,#50781,.F.); +#50781 = EDGE_CURVE('',#47468,#47570,#50782,.T.); +#50782 = LINE('',#50783,#50784); +#50783 = CARTESIAN_POINT('',(-2.379496640897,4.24,0.2479055467)); +#50784 = VECTOR('',#50785,1.); +#50785 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#50786 = CYLINDRICAL_SURFACE('',#50787,0.3); +#50787 = AXIS2_PLACEMENT_3D('',#50788,#50789,#50790); +#50788 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.3)); +#50789 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#50790 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#50791 = ADVANCED_FACE('',(#50792),#50798,.F.); +#50792 = FACE_BOUND('',#50793,.F.); +#50793 = EDGE_LOOP('',(#50794,#50795,#50796,#50797)); +#50794 = ORIENTED_EDGE('',*,*,#47551,.T.); +#50795 = ORIENTED_EDGE('',*,*,#47569,.T.); +#50796 = ORIENTED_EDGE('',*,*,#50781,.F.); +#50797 = ORIENTED_EDGE('',*,*,#47467,.F.); +#50798 = PLANE('',#50799); +#50799 = AXIS2_PLACEMENT_3D('',#50800,#50801,#50802); +#50800 = CARTESIAN_POINT('',(-2.298480775301,4.24,0.742364817767)); +#50801 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#50802 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#50803 = ADVANCED_FACE('',(#50804),#50815,.F.); +#50804 = FACE_BOUND('',#50805,.F.); +#50805 = EDGE_LOOP('',(#50806,#50812,#50813,#50814)); +#50806 = ORIENTED_EDGE('',*,*,#50807,.T.); +#50807 = EDGE_CURVE('',#47696,#47798,#50808,.T.); +#50808 = LINE('',#50809,#50810); +#50809 = CARTESIAN_POINT('',(2.5764581915,4.65,0.282635182233)); +#50810 = VECTOR('',#50811,1.); +#50811 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50812 = ORIENTED_EDGE('',*,*,#47806,.T.); +#50813 = ORIENTED_EDGE('',*,*,#49750,.F.); +#50814 = ORIENTED_EDGE('',*,*,#47704,.F.); +#50815 = PLANE('',#50816); +#50816 = AXIS2_PLACEMENT_3D('',#50817,#50818,#50819); +#50817 = CARTESIAN_POINT('',(2.5764581915,4.65,0.282635182233)); +#50818 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#50819 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50820 = ADVANCED_FACE('',(#50821),#50832,.F.); +#50821 = FACE_BOUND('',#50822,.F.); +#50822 = EDGE_LOOP('',(#50823,#50829,#50830,#50831)); +#50823 = ORIENTED_EDGE('',*,*,#50824,.T.); +#50824 = EDGE_CURVE('',#47688,#47790,#50825,.T.); +#50825 = LINE('',#50826,#50827); +#50826 = CARTESIAN_POINT('',(2.674938966801,4.65,0.2)); +#50827 = VECTOR('',#50828,1.); +#50828 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50829 = ORIENTED_EDGE('',*,*,#47797,.T.); +#50830 = ORIENTED_EDGE('',*,*,#50807,.F.); +#50831 = ORIENTED_EDGE('',*,*,#47695,.F.); +#50832 = CYLINDRICAL_SURFACE('',#50833,0.1); +#50833 = AXIS2_PLACEMENT_3D('',#50834,#50835,#50836); +#50834 = CARTESIAN_POINT('',(2.674938966801,4.65,0.3)); +#50835 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50836 = DIRECTION('',(0.,0.,-1.)); +#50837 = ADVANCED_FACE('',(#50838),#50849,.F.); +#50838 = FACE_BOUND('',#50839,.F.); +#50839 = EDGE_LOOP('',(#50840,#50846,#50847,#50848)); +#50840 = ORIENTED_EDGE('',*,*,#50841,.T.); +#50841 = EDGE_CURVE('',#47680,#47782,#50842,.T.); +#50842 = LINE('',#50843,#50844); +#50843 = CARTESIAN_POINT('',(3.,4.65,0.2)); +#50844 = VECTOR('',#50845,1.); +#50845 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50846 = ORIENTED_EDGE('',*,*,#47789,.T.); +#50847 = ORIENTED_EDGE('',*,*,#50824,.F.); +#50848 = ORIENTED_EDGE('',*,*,#47687,.F.); +#50849 = PLANE('',#50850); +#50850 = AXIS2_PLACEMENT_3D('',#50851,#50852,#50853); +#50851 = CARTESIAN_POINT('',(3.,4.65,0.2)); +#50852 = DIRECTION('',(0.,0.,-1.)); +#50853 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#50854 = ADVANCED_FACE('',(#50855),#50866,.F.); +#50855 = FACE_BOUND('',#50856,.F.); +#50856 = EDGE_LOOP('',(#50857,#50863,#50864,#50865)); +#50857 = ORIENTED_EDGE('',*,*,#50858,.T.); +#50858 = EDGE_CURVE('',#47672,#47774,#50859,.T.); +#50859 = LINE('',#50860,#50861); +#50860 = CARTESIAN_POINT('',(3.,4.65,0.)); +#50861 = VECTOR('',#50862,1.); +#50862 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50863 = ORIENTED_EDGE('',*,*,#47781,.T.); +#50864 = ORIENTED_EDGE('',*,*,#50841,.F.); +#50865 = ORIENTED_EDGE('',*,*,#47679,.F.); +#50866 = PLANE('',#50867); +#50867 = AXIS2_PLACEMENT_3D('',#50868,#50869,#50870); +#50868 = CARTESIAN_POINT('',(3.,4.65,0.)); +#50869 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50870 = DIRECTION('',(0.,0.,1.)); +#50871 = ADVANCED_FACE('',(#50872),#50883,.F.); +#50872 = FACE_BOUND('',#50873,.F.); +#50873 = EDGE_LOOP('',(#50874,#50880,#50881,#50882)); +#50874 = ORIENTED_EDGE('',*,*,#50875,.T.); +#50875 = EDGE_CURVE('',#47663,#47765,#50876,.T.); +#50876 = LINE('',#50877,#50878); +#50877 = CARTESIAN_POINT('',(2.674938966801,4.65,0.)); +#50878 = VECTOR('',#50879,1.); +#50879 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50880 = ORIENTED_EDGE('',*,*,#47773,.T.); +#50881 = ORIENTED_EDGE('',*,*,#50858,.F.); +#50882 = ORIENTED_EDGE('',*,*,#47671,.F.); +#50883 = PLANE('',#50884); +#50884 = AXIS2_PLACEMENT_3D('',#50885,#50886,#50887); +#50885 = CARTESIAN_POINT('',(2.674938966801,4.65,0.)); +#50886 = DIRECTION('',(0.,0.,1.)); +#50887 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#50888 = ADVANCED_FACE('',(#50889),#50900,.T.); +#50889 = FACE_BOUND('',#50890,.T.); +#50890 = EDGE_LOOP('',(#50891,#50892,#50893,#50894)); +#50891 = ORIENTED_EDGE('',*,*,#47662,.T.); +#50892 = ORIENTED_EDGE('',*,*,#50875,.T.); +#50893 = ORIENTED_EDGE('',*,*,#47764,.F.); +#50894 = ORIENTED_EDGE('',*,*,#50895,.F.); +#50895 = EDGE_CURVE('',#47655,#47757,#50896,.T.); +#50896 = LINE('',#50897,#50898); +#50897 = CARTESIAN_POINT('',(2.379496640897,4.65,0.2479055467)); +#50898 = VECTOR('',#50899,1.); +#50899 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50900 = CYLINDRICAL_SURFACE('',#50901,0.3); +#50901 = AXIS2_PLACEMENT_3D('',#50902,#50903,#50904); +#50902 = CARTESIAN_POINT('',(2.674938966801,4.65,0.3)); +#50903 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50904 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50905 = ADVANCED_FACE('',(#50906),#50912,.F.); +#50906 = FACE_BOUND('',#50907,.F.); +#50907 = EDGE_LOOP('',(#50908,#50909,#50910,#50911)); +#50908 = ORIENTED_EDGE('',*,*,#47738,.T.); +#50909 = ORIENTED_EDGE('',*,*,#47756,.T.); +#50910 = ORIENTED_EDGE('',*,*,#50895,.F.); +#50911 = ORIENTED_EDGE('',*,*,#47654,.F.); +#50912 = PLANE('',#50913); +#50913 = AXIS2_PLACEMENT_3D('',#50914,#50915,#50916); +#50914 = CARTESIAN_POINT('',(2.298480775301,4.65,0.742364817767)); +#50915 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#50916 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50917 = ADVANCED_FACE('',(#50918),#50929,.T.); +#50918 = FACE_BOUND('',#50919,.T.); +#50919 = EDGE_LOOP('',(#50920,#50921,#50922,#50923)); +#50920 = ORIENTED_EDGE('',*,*,#47916,.T.); +#50921 = ORIENTED_EDGE('',*,*,#49599,.T.); +#50922 = ORIENTED_EDGE('',*,*,#48025,.F.); +#50923 = ORIENTED_EDGE('',*,*,#50924,.F.); +#50924 = EDGE_CURVE('',#47909,#48018,#50925,.T.); +#50925 = LINE('',#50926,#50927); +#50926 = CARTESIAN_POINT('',(2.495442325904,3.38,0.7770944533)); +#50927 = VECTOR('',#50928,1.); +#50928 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50929 = CYLINDRICAL_SURFACE('',#50930,0.3); +#50930 = AXIS2_PLACEMENT_3D('',#50931,#50932,#50933); +#50931 = CARTESIAN_POINT('',(2.2,3.38,0.725)); +#50932 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50933 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50934 = ADVANCED_FACE('',(#50935),#50946,.F.); +#50935 = FACE_BOUND('',#50936,.F.); +#50936 = EDGE_LOOP('',(#50937,#50943,#50944,#50945)); +#50937 = ORIENTED_EDGE('',*,*,#50938,.T.); +#50938 = EDGE_CURVE('',#47900,#48009,#50939,.T.); +#50939 = LINE('',#50940,#50941); +#50940 = CARTESIAN_POINT('',(2.5764581915,3.38,0.282635182233)); +#50941 = VECTOR('',#50942,1.); +#50942 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50943 = ORIENTED_EDGE('',*,*,#48017,.T.); +#50944 = ORIENTED_EDGE('',*,*,#50924,.F.); +#50945 = ORIENTED_EDGE('',*,*,#47908,.F.); +#50946 = PLANE('',#50947); +#50947 = AXIS2_PLACEMENT_3D('',#50948,#50949,#50950); +#50948 = CARTESIAN_POINT('',(2.5764581915,3.38,0.282635182233)); +#50949 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#50950 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50951 = ADVANCED_FACE('',(#50952),#50963,.F.); +#50952 = FACE_BOUND('',#50953,.F.); +#50953 = EDGE_LOOP('',(#50954,#50960,#50961,#50962)); +#50954 = ORIENTED_EDGE('',*,*,#50955,.T.); +#50955 = EDGE_CURVE('',#47892,#48001,#50956,.T.); +#50956 = LINE('',#50957,#50958); +#50957 = CARTESIAN_POINT('',(2.674938966801,3.38,0.2)); +#50958 = VECTOR('',#50959,1.); +#50959 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50960 = ORIENTED_EDGE('',*,*,#48008,.T.); +#50961 = ORIENTED_EDGE('',*,*,#50938,.F.); +#50962 = ORIENTED_EDGE('',*,*,#47899,.F.); +#50963 = CYLINDRICAL_SURFACE('',#50964,0.1); +#50964 = AXIS2_PLACEMENT_3D('',#50965,#50966,#50967); +#50965 = CARTESIAN_POINT('',(2.674938966801,3.38,0.3)); +#50966 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50967 = DIRECTION('',(0.,0.,-1.)); +#50968 = ADVANCED_FACE('',(#50969),#50980,.F.); +#50969 = FACE_BOUND('',#50970,.F.); +#50970 = EDGE_LOOP('',(#50971,#50977,#50978,#50979)); +#50971 = ORIENTED_EDGE('',*,*,#50972,.T.); +#50972 = EDGE_CURVE('',#47884,#47993,#50973,.T.); +#50973 = LINE('',#50974,#50975); +#50974 = CARTESIAN_POINT('',(3.,3.38,0.2)); +#50975 = VECTOR('',#50976,1.); +#50976 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50977 = ORIENTED_EDGE('',*,*,#48000,.T.); +#50978 = ORIENTED_EDGE('',*,*,#50955,.F.); +#50979 = ORIENTED_EDGE('',*,*,#47891,.F.); +#50980 = PLANE('',#50981); +#50981 = AXIS2_PLACEMENT_3D('',#50982,#50983,#50984); +#50982 = CARTESIAN_POINT('',(3.,3.38,0.2)); +#50983 = DIRECTION('',(0.,0.,-1.)); +#50984 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#50985 = ADVANCED_FACE('',(#50986),#50997,.F.); +#50986 = FACE_BOUND('',#50987,.F.); +#50987 = EDGE_LOOP('',(#50988,#50994,#50995,#50996)); +#50988 = ORIENTED_EDGE('',*,*,#50989,.T.); +#50989 = EDGE_CURVE('',#47876,#47985,#50990,.T.); +#50990 = LINE('',#50991,#50992); +#50991 = CARTESIAN_POINT('',(3.,3.38,0.)); +#50992 = VECTOR('',#50993,1.); +#50993 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50994 = ORIENTED_EDGE('',*,*,#47992,.T.); +#50995 = ORIENTED_EDGE('',*,*,#50972,.F.); +#50996 = ORIENTED_EDGE('',*,*,#47883,.F.); +#50997 = PLANE('',#50998); +#50998 = AXIS2_PLACEMENT_3D('',#50999,#51000,#51001); +#50999 = CARTESIAN_POINT('',(3.,3.38,0.)); +#51000 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51001 = DIRECTION('',(0.,0.,1.)); +#51002 = ADVANCED_FACE('',(#51003),#51014,.F.); +#51003 = FACE_BOUND('',#51004,.F.); +#51004 = EDGE_LOOP('',(#51005,#51011,#51012,#51013)); +#51005 = ORIENTED_EDGE('',*,*,#51006,.T.); +#51006 = EDGE_CURVE('',#47867,#47976,#51007,.T.); +#51007 = LINE('',#51008,#51009); +#51008 = CARTESIAN_POINT('',(2.674938966801,3.38,0.)); +#51009 = VECTOR('',#51010,1.); +#51010 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51011 = ORIENTED_EDGE('',*,*,#47984,.T.); +#51012 = ORIENTED_EDGE('',*,*,#50989,.F.); +#51013 = ORIENTED_EDGE('',*,*,#47875,.F.); +#51014 = PLANE('',#51015); +#51015 = AXIS2_PLACEMENT_3D('',#51016,#51017,#51018); +#51016 = CARTESIAN_POINT('',(2.674938966801,3.38,0.)); +#51017 = DIRECTION('',(0.,0.,1.)); +#51018 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#51019 = ADVANCED_FACE('',(#51020),#51031,.T.); +#51020 = FACE_BOUND('',#51021,.T.); +#51021 = EDGE_LOOP('',(#51022,#51023,#51024,#51025)); +#51022 = ORIENTED_EDGE('',*,*,#47866,.T.); +#51023 = ORIENTED_EDGE('',*,*,#51006,.T.); +#51024 = ORIENTED_EDGE('',*,*,#47975,.F.); +#51025 = ORIENTED_EDGE('',*,*,#51026,.F.); +#51026 = EDGE_CURVE('',#47859,#47968,#51027,.T.); +#51027 = LINE('',#51028,#51029); +#51028 = CARTESIAN_POINT('',(2.379496640897,3.38,0.2479055467)); +#51029 = VECTOR('',#51030,1.); +#51030 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51031 = CYLINDRICAL_SURFACE('',#51032,0.3); +#51032 = AXIS2_PLACEMENT_3D('',#51033,#51034,#51035); +#51033 = CARTESIAN_POINT('',(2.674938966801,3.38,0.3)); +#51034 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51035 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#51036 = ADVANCED_FACE('',(#51037),#51043,.F.); +#51037 = FACE_BOUND('',#51038,.F.); +#51038 = EDGE_LOOP('',(#51039,#51040,#51041,#51042)); +#51039 = ORIENTED_EDGE('',*,*,#47949,.T.); +#51040 = ORIENTED_EDGE('',*,*,#47967,.T.); +#51041 = ORIENTED_EDGE('',*,*,#51026,.F.); +#51042 = ORIENTED_EDGE('',*,*,#47858,.F.); +#51043 = PLANE('',#51044); +#51044 = AXIS2_PLACEMENT_3D('',#51045,#51046,#51047); +#51045 = CARTESIAN_POINT('',(2.298480775301,3.38,0.742364817767)); +#51046 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#51047 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#51048 = ADVANCED_FACE('',(#51049),#51060,.T.); +#51049 = FACE_BOUND('',#51050,.T.); +#51050 = EDGE_LOOP('',(#51051,#51052,#51053,#51054)); +#51051 = ORIENTED_EDGE('',*,*,#48139,.T.); +#51052 = ORIENTED_EDGE('',*,*,#49618,.T.); +#51053 = ORIENTED_EDGE('',*,*,#48248,.F.); +#51054 = ORIENTED_EDGE('',*,*,#51055,.F.); +#51055 = EDGE_CURVE('',#48132,#48241,#51056,.T.); +#51056 = LINE('',#51057,#51058); +#51057 = CARTESIAN_POINT('',(2.495442325904,2.11,0.7770944533)); +#51058 = VECTOR('',#51059,1.); +#51059 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51060 = CYLINDRICAL_SURFACE('',#51061,0.3); +#51061 = AXIS2_PLACEMENT_3D('',#51062,#51063,#51064); +#51062 = CARTESIAN_POINT('',(2.2,2.11,0.725)); +#51063 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51064 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51065 = ADVANCED_FACE('',(#51066),#51077,.F.); +#51066 = FACE_BOUND('',#51067,.F.); +#51067 = EDGE_LOOP('',(#51068,#51074,#51075,#51076)); +#51068 = ORIENTED_EDGE('',*,*,#51069,.T.); +#51069 = EDGE_CURVE('',#48123,#48232,#51070,.T.); +#51070 = LINE('',#51071,#51072); +#51071 = CARTESIAN_POINT('',(2.5764581915,2.11,0.282635182233)); +#51072 = VECTOR('',#51073,1.); +#51073 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51074 = ORIENTED_EDGE('',*,*,#48240,.T.); +#51075 = ORIENTED_EDGE('',*,*,#51055,.F.); +#51076 = ORIENTED_EDGE('',*,*,#48131,.F.); +#51077 = PLANE('',#51078); +#51078 = AXIS2_PLACEMENT_3D('',#51079,#51080,#51081); +#51079 = CARTESIAN_POINT('',(2.5764581915,2.11,0.282635182233)); +#51080 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#51081 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#51082 = ADVANCED_FACE('',(#51083),#51094,.F.); +#51083 = FACE_BOUND('',#51084,.F.); +#51084 = EDGE_LOOP('',(#51085,#51091,#51092,#51093)); +#51085 = ORIENTED_EDGE('',*,*,#51086,.T.); +#51086 = EDGE_CURVE('',#48115,#48224,#51087,.T.); +#51087 = LINE('',#51088,#51089); +#51088 = CARTESIAN_POINT('',(2.674938966801,2.11,0.2)); +#51089 = VECTOR('',#51090,1.); +#51090 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51091 = ORIENTED_EDGE('',*,*,#48231,.T.); +#51092 = ORIENTED_EDGE('',*,*,#51069,.F.); +#51093 = ORIENTED_EDGE('',*,*,#48122,.F.); +#51094 = CYLINDRICAL_SURFACE('',#51095,0.1); +#51095 = AXIS2_PLACEMENT_3D('',#51096,#51097,#51098); +#51096 = CARTESIAN_POINT('',(2.674938966801,2.11,0.3)); +#51097 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51098 = DIRECTION('',(0.,0.,-1.)); +#51099 = ADVANCED_FACE('',(#51100),#51111,.F.); +#51100 = FACE_BOUND('',#51101,.F.); +#51101 = EDGE_LOOP('',(#51102,#51108,#51109,#51110)); +#51102 = ORIENTED_EDGE('',*,*,#51103,.T.); +#51103 = EDGE_CURVE('',#48107,#48216,#51104,.T.); +#51104 = LINE('',#51105,#51106); +#51105 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#51106 = VECTOR('',#51107,1.); +#51107 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51108 = ORIENTED_EDGE('',*,*,#48223,.T.); +#51109 = ORIENTED_EDGE('',*,*,#51086,.F.); +#51110 = ORIENTED_EDGE('',*,*,#48114,.F.); +#51111 = PLANE('',#51112); +#51112 = AXIS2_PLACEMENT_3D('',#51113,#51114,#51115); +#51113 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#51114 = DIRECTION('',(0.,0.,-1.)); +#51115 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51116 = ADVANCED_FACE('',(#51117),#51128,.F.); +#51117 = FACE_BOUND('',#51118,.F.); +#51118 = EDGE_LOOP('',(#51119,#51125,#51126,#51127)); +#51119 = ORIENTED_EDGE('',*,*,#51120,.T.); +#51120 = EDGE_CURVE('',#48099,#48208,#51121,.T.); +#51121 = LINE('',#51122,#51123); +#51122 = CARTESIAN_POINT('',(3.,2.11,0.)); +#51123 = VECTOR('',#51124,1.); +#51124 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51125 = ORIENTED_EDGE('',*,*,#48215,.T.); +#51126 = ORIENTED_EDGE('',*,*,#51103,.F.); +#51127 = ORIENTED_EDGE('',*,*,#48106,.F.); +#51128 = PLANE('',#51129); +#51129 = AXIS2_PLACEMENT_3D('',#51130,#51131,#51132); +#51130 = CARTESIAN_POINT('',(3.,2.11,0.)); +#51131 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51132 = DIRECTION('',(0.,0.,1.)); +#51133 = ADVANCED_FACE('',(#51134),#51145,.F.); +#51134 = FACE_BOUND('',#51135,.F.); +#51135 = EDGE_LOOP('',(#51136,#51142,#51143,#51144)); +#51136 = ORIENTED_EDGE('',*,*,#51137,.T.); +#51137 = EDGE_CURVE('',#48090,#48199,#51138,.T.); +#51138 = LINE('',#51139,#51140); +#51139 = CARTESIAN_POINT('',(2.674938966801,2.11,0.)); +#51140 = VECTOR('',#51141,1.); +#51141 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51142 = ORIENTED_EDGE('',*,*,#48207,.T.); +#51143 = ORIENTED_EDGE('',*,*,#51120,.F.); +#51144 = ORIENTED_EDGE('',*,*,#48098,.F.); +#51145 = PLANE('',#51146); +#51146 = AXIS2_PLACEMENT_3D('',#51147,#51148,#51149); +#51147 = CARTESIAN_POINT('',(2.674938966801,2.11,0.)); +#51148 = DIRECTION('',(0.,0.,1.)); +#51149 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#51150 = ADVANCED_FACE('',(#51151),#51162,.T.); +#51151 = FACE_BOUND('',#51152,.T.); +#51152 = EDGE_LOOP('',(#51153,#51154,#51155,#51156)); +#51153 = ORIENTED_EDGE('',*,*,#48089,.T.); +#51154 = ORIENTED_EDGE('',*,*,#51137,.T.); +#51155 = ORIENTED_EDGE('',*,*,#48198,.F.); +#51156 = ORIENTED_EDGE('',*,*,#51157,.F.); +#51157 = EDGE_CURVE('',#48082,#48191,#51158,.T.); +#51158 = LINE('',#51159,#51160); +#51159 = CARTESIAN_POINT('',(2.379496640897,2.11,0.2479055467)); +#51160 = VECTOR('',#51161,1.); +#51161 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51162 = CYLINDRICAL_SURFACE('',#51163,0.3); +#51163 = AXIS2_PLACEMENT_3D('',#51164,#51165,#51166); +#51164 = CARTESIAN_POINT('',(2.674938966801,2.11,0.3)); +#51165 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51166 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#51167 = ADVANCED_FACE('',(#51168),#51174,.F.); +#51168 = FACE_BOUND('',#51169,.F.); +#51169 = EDGE_LOOP('',(#51170,#51171,#51172,#51173)); +#51170 = ORIENTED_EDGE('',*,*,#48172,.T.); +#51171 = ORIENTED_EDGE('',*,*,#48190,.T.); +#51172 = ORIENTED_EDGE('',*,*,#51157,.F.); +#51173 = ORIENTED_EDGE('',*,*,#48081,.F.); +#51174 = PLANE('',#51175); +#51175 = AXIS2_PLACEMENT_3D('',#51176,#51177,#51178); +#51176 = CARTESIAN_POINT('',(2.298480775301,2.11,0.742364817767)); +#51177 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#51178 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#51179 = ADVANCED_FACE('',(#51180),#51191,.T.); +#51180 = FACE_BOUND('',#51181,.T.); +#51181 = EDGE_LOOP('',(#51182,#51183,#51184,#51185)); +#51182 = ORIENTED_EDGE('',*,*,#48362,.T.); +#51183 = ORIENTED_EDGE('',*,*,#49637,.T.); +#51184 = ORIENTED_EDGE('',*,*,#48471,.F.); +#51185 = ORIENTED_EDGE('',*,*,#51186,.F.); +#51186 = EDGE_CURVE('',#48355,#48464,#51187,.T.); +#51187 = LINE('',#51188,#51189); +#51188 = CARTESIAN_POINT('',(2.495442325904,0.84,0.7770944533)); +#51189 = VECTOR('',#51190,1.); +#51190 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51191 = CYLINDRICAL_SURFACE('',#51192,0.3); +#51192 = AXIS2_PLACEMENT_3D('',#51193,#51194,#51195); +#51193 = CARTESIAN_POINT('',(2.2,0.84,0.725)); +#51194 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51195 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51196 = ADVANCED_FACE('',(#51197),#51208,.F.); +#51197 = FACE_BOUND('',#51198,.F.); +#51198 = EDGE_LOOP('',(#51199,#51205,#51206,#51207)); +#51199 = ORIENTED_EDGE('',*,*,#51200,.T.); +#51200 = EDGE_CURVE('',#48346,#48455,#51201,.T.); +#51201 = LINE('',#51202,#51203); +#51202 = CARTESIAN_POINT('',(2.5764581915,0.84,0.282635182233)); +#51203 = VECTOR('',#51204,1.); +#51204 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51205 = ORIENTED_EDGE('',*,*,#48463,.T.); +#51206 = ORIENTED_EDGE('',*,*,#51186,.F.); +#51207 = ORIENTED_EDGE('',*,*,#48354,.F.); +#51208 = PLANE('',#51209); +#51209 = AXIS2_PLACEMENT_3D('',#51210,#51211,#51212); +#51210 = CARTESIAN_POINT('',(2.5764581915,0.84,0.282635182233)); +#51211 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#51212 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#51213 = ADVANCED_FACE('',(#51214),#51225,.F.); +#51214 = FACE_BOUND('',#51215,.F.); +#51215 = EDGE_LOOP('',(#51216,#51222,#51223,#51224)); +#51216 = ORIENTED_EDGE('',*,*,#51217,.T.); +#51217 = EDGE_CURVE('',#48338,#48447,#51218,.T.); +#51218 = LINE('',#51219,#51220); +#51219 = CARTESIAN_POINT('',(2.674938966801,0.84,0.2)); +#51220 = VECTOR('',#51221,1.); +#51221 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51222 = ORIENTED_EDGE('',*,*,#48454,.T.); +#51223 = ORIENTED_EDGE('',*,*,#51200,.F.); +#51224 = ORIENTED_EDGE('',*,*,#48345,.F.); +#51225 = CYLINDRICAL_SURFACE('',#51226,0.1); +#51226 = AXIS2_PLACEMENT_3D('',#51227,#51228,#51229); +#51227 = CARTESIAN_POINT('',(2.674938966801,0.84,0.3)); +#51228 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51229 = DIRECTION('',(0.,0.,-1.)); +#51230 = ADVANCED_FACE('',(#51231),#51242,.F.); +#51231 = FACE_BOUND('',#51232,.F.); +#51232 = EDGE_LOOP('',(#51233,#51239,#51240,#51241)); +#51233 = ORIENTED_EDGE('',*,*,#51234,.T.); +#51234 = EDGE_CURVE('',#48330,#48439,#51235,.T.); +#51235 = LINE('',#51236,#51237); +#51236 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#51237 = VECTOR('',#51238,1.); +#51238 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51239 = ORIENTED_EDGE('',*,*,#48446,.T.); +#51240 = ORIENTED_EDGE('',*,*,#51217,.F.); +#51241 = ORIENTED_EDGE('',*,*,#48337,.F.); +#51242 = PLANE('',#51243); +#51243 = AXIS2_PLACEMENT_3D('',#51244,#51245,#51246); +#51244 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#51245 = DIRECTION('',(0.,0.,-1.)); +#51246 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51247 = ADVANCED_FACE('',(#51248),#51259,.F.); +#51248 = FACE_BOUND('',#51249,.F.); +#51249 = EDGE_LOOP('',(#51250,#51256,#51257,#51258)); +#51250 = ORIENTED_EDGE('',*,*,#51251,.T.); +#51251 = EDGE_CURVE('',#48322,#48431,#51252,.T.); +#51252 = LINE('',#51253,#51254); +#51253 = CARTESIAN_POINT('',(3.,0.84,0.)); +#51254 = VECTOR('',#51255,1.); +#51255 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51256 = ORIENTED_EDGE('',*,*,#48438,.T.); +#51257 = ORIENTED_EDGE('',*,*,#51234,.F.); +#51258 = ORIENTED_EDGE('',*,*,#48329,.F.); +#51259 = PLANE('',#51260); +#51260 = AXIS2_PLACEMENT_3D('',#51261,#51262,#51263); +#51261 = CARTESIAN_POINT('',(3.,0.84,0.)); +#51262 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51263 = DIRECTION('',(0.,0.,1.)); +#51264 = ADVANCED_FACE('',(#51265),#51276,.F.); +#51265 = FACE_BOUND('',#51266,.F.); +#51266 = EDGE_LOOP('',(#51267,#51273,#51274,#51275)); +#51267 = ORIENTED_EDGE('',*,*,#51268,.T.); +#51268 = EDGE_CURVE('',#48313,#48422,#51269,.T.); +#51269 = LINE('',#51270,#51271); +#51270 = CARTESIAN_POINT('',(2.674938966801,0.84,0.)); +#51271 = VECTOR('',#51272,1.); +#51272 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51273 = ORIENTED_EDGE('',*,*,#48430,.T.); +#51274 = ORIENTED_EDGE('',*,*,#51251,.F.); +#51275 = ORIENTED_EDGE('',*,*,#48321,.F.); +#51276 = PLANE('',#51277); +#51277 = AXIS2_PLACEMENT_3D('',#51278,#51279,#51280); +#51278 = CARTESIAN_POINT('',(2.674938966801,0.84,0.)); +#51279 = DIRECTION('',(0.,0.,1.)); +#51280 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#51281 = ADVANCED_FACE('',(#51282),#51293,.T.); +#51282 = FACE_BOUND('',#51283,.T.); +#51283 = EDGE_LOOP('',(#51284,#51285,#51286,#51287)); +#51284 = ORIENTED_EDGE('',*,*,#48312,.T.); +#51285 = ORIENTED_EDGE('',*,*,#51268,.T.); +#51286 = ORIENTED_EDGE('',*,*,#48421,.F.); +#51287 = ORIENTED_EDGE('',*,*,#51288,.F.); +#51288 = EDGE_CURVE('',#48305,#48414,#51289,.T.); +#51289 = LINE('',#51290,#51291); +#51290 = CARTESIAN_POINT('',(2.379496640897,0.84,0.2479055467)); +#51291 = VECTOR('',#51292,1.); +#51292 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51293 = CYLINDRICAL_SURFACE('',#51294,0.3); +#51294 = AXIS2_PLACEMENT_3D('',#51295,#51296,#51297); +#51295 = CARTESIAN_POINT('',(2.674938966801,0.84,0.3)); +#51296 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51297 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#51298 = ADVANCED_FACE('',(#51299),#51305,.F.); +#51299 = FACE_BOUND('',#51300,.F.); +#51300 = EDGE_LOOP('',(#51301,#51302,#51303,#51304)); +#51301 = ORIENTED_EDGE('',*,*,#48395,.T.); +#51302 = ORIENTED_EDGE('',*,*,#48413,.T.); +#51303 = ORIENTED_EDGE('',*,*,#51288,.F.); +#51304 = ORIENTED_EDGE('',*,*,#48304,.F.); +#51305 = PLANE('',#51306); +#51306 = AXIS2_PLACEMENT_3D('',#51307,#51308,#51309); +#51307 = CARTESIAN_POINT('',(2.298480775301,0.84,0.742364817767)); +#51308 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#51309 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#51310 = ADVANCED_FACE('',(#51311),#51322,.T.); +#51311 = FACE_BOUND('',#51312,.T.); +#51312 = EDGE_LOOP('',(#51313,#51314,#51315,#51316)); +#51313 = ORIENTED_EDGE('',*,*,#48585,.T.); +#51314 = ORIENTED_EDGE('',*,*,#49656,.T.); +#51315 = ORIENTED_EDGE('',*,*,#48694,.F.); +#51316 = ORIENTED_EDGE('',*,*,#51317,.F.); +#51317 = EDGE_CURVE('',#48578,#48687,#51318,.T.); +#51318 = LINE('',#51319,#51320); +#51319 = CARTESIAN_POINT('',(2.495442325904,-0.43,0.7770944533)); +#51320 = VECTOR('',#51321,1.); +#51321 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51322 = CYLINDRICAL_SURFACE('',#51323,0.3); +#51323 = AXIS2_PLACEMENT_3D('',#51324,#51325,#51326); +#51324 = CARTESIAN_POINT('',(2.2,-0.43,0.725)); +#51325 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51326 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51327 = ADVANCED_FACE('',(#51328),#51339,.F.); +#51328 = FACE_BOUND('',#51329,.F.); +#51329 = EDGE_LOOP('',(#51330,#51336,#51337,#51338)); +#51330 = ORIENTED_EDGE('',*,*,#51331,.T.); +#51331 = EDGE_CURVE('',#48569,#48678,#51332,.T.); +#51332 = LINE('',#51333,#51334); +#51333 = CARTESIAN_POINT('',(2.5764581915,-0.43,0.282635182233)); +#51334 = VECTOR('',#51335,1.); +#51335 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51336 = ORIENTED_EDGE('',*,*,#48686,.T.); +#51337 = ORIENTED_EDGE('',*,*,#51317,.F.); +#51338 = ORIENTED_EDGE('',*,*,#48577,.F.); +#51339 = PLANE('',#51340); +#51340 = AXIS2_PLACEMENT_3D('',#51341,#51342,#51343); +#51341 = CARTESIAN_POINT('',(2.5764581915,-0.43,0.282635182233)); +#51342 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#51343 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#51344 = ADVANCED_FACE('',(#51345),#51356,.F.); +#51345 = FACE_BOUND('',#51346,.F.); +#51346 = EDGE_LOOP('',(#51347,#51353,#51354,#51355)); +#51347 = ORIENTED_EDGE('',*,*,#51348,.T.); +#51348 = EDGE_CURVE('',#48561,#48670,#51349,.T.); +#51349 = LINE('',#51350,#51351); +#51350 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.2)); +#51351 = VECTOR('',#51352,1.); +#51352 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51353 = ORIENTED_EDGE('',*,*,#48677,.T.); +#51354 = ORIENTED_EDGE('',*,*,#51331,.F.); +#51355 = ORIENTED_EDGE('',*,*,#48568,.F.); +#51356 = CYLINDRICAL_SURFACE('',#51357,0.1); +#51357 = AXIS2_PLACEMENT_3D('',#51358,#51359,#51360); +#51358 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.3)); +#51359 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51360 = DIRECTION('',(0.,0.,-1.)); +#51361 = ADVANCED_FACE('',(#51362),#51373,.F.); +#51362 = FACE_BOUND('',#51363,.F.); +#51363 = EDGE_LOOP('',(#51364,#51370,#51371,#51372)); +#51364 = ORIENTED_EDGE('',*,*,#51365,.T.); +#51365 = EDGE_CURVE('',#48553,#48662,#51366,.T.); +#51366 = LINE('',#51367,#51368); +#51367 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#51368 = VECTOR('',#51369,1.); +#51369 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51370 = ORIENTED_EDGE('',*,*,#48669,.T.); +#51371 = ORIENTED_EDGE('',*,*,#51348,.F.); +#51372 = ORIENTED_EDGE('',*,*,#48560,.F.); +#51373 = PLANE('',#51374); +#51374 = AXIS2_PLACEMENT_3D('',#51375,#51376,#51377); +#51375 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#51376 = DIRECTION('',(0.,0.,-1.)); +#51377 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51378 = ADVANCED_FACE('',(#51379),#51390,.F.); +#51379 = FACE_BOUND('',#51380,.F.); +#51380 = EDGE_LOOP('',(#51381,#51387,#51388,#51389)); +#51381 = ORIENTED_EDGE('',*,*,#51382,.T.); +#51382 = EDGE_CURVE('',#48545,#48654,#51383,.T.); +#51383 = LINE('',#51384,#51385); +#51384 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#51385 = VECTOR('',#51386,1.); +#51386 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51387 = ORIENTED_EDGE('',*,*,#48661,.T.); +#51388 = ORIENTED_EDGE('',*,*,#51365,.F.); +#51389 = ORIENTED_EDGE('',*,*,#48552,.F.); +#51390 = PLANE('',#51391); +#51391 = AXIS2_PLACEMENT_3D('',#51392,#51393,#51394); +#51392 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#51393 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51394 = DIRECTION('',(0.,0.,1.)); +#51395 = ADVANCED_FACE('',(#51396),#51407,.F.); +#51396 = FACE_BOUND('',#51397,.F.); +#51397 = EDGE_LOOP('',(#51398,#51404,#51405,#51406)); +#51398 = ORIENTED_EDGE('',*,*,#51399,.T.); +#51399 = EDGE_CURVE('',#48536,#48645,#51400,.T.); +#51400 = LINE('',#51401,#51402); +#51401 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.)); +#51402 = VECTOR('',#51403,1.); +#51403 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51404 = ORIENTED_EDGE('',*,*,#48653,.T.); +#51405 = ORIENTED_EDGE('',*,*,#51382,.F.); +#51406 = ORIENTED_EDGE('',*,*,#48544,.F.); +#51407 = PLANE('',#51408); +#51408 = AXIS2_PLACEMENT_3D('',#51409,#51410,#51411); +#51409 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.)); +#51410 = DIRECTION('',(0.,0.,1.)); +#51411 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#51412 = ADVANCED_FACE('',(#51413),#51424,.T.); +#51413 = FACE_BOUND('',#51414,.T.); +#51414 = EDGE_LOOP('',(#51415,#51416,#51417,#51418)); +#51415 = ORIENTED_EDGE('',*,*,#48535,.T.); +#51416 = ORIENTED_EDGE('',*,*,#51399,.T.); +#51417 = ORIENTED_EDGE('',*,*,#48644,.F.); +#51418 = ORIENTED_EDGE('',*,*,#51419,.F.); +#51419 = EDGE_CURVE('',#48528,#48637,#51420,.T.); +#51420 = LINE('',#51421,#51422); +#51421 = CARTESIAN_POINT('',(2.379496640897,-0.43,0.2479055467)); +#51422 = VECTOR('',#51423,1.); +#51423 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51424 = CYLINDRICAL_SURFACE('',#51425,0.3); +#51425 = AXIS2_PLACEMENT_3D('',#51426,#51427,#51428); +#51426 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.3)); +#51427 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51428 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#51429 = ADVANCED_FACE('',(#51430),#51436,.F.); +#51430 = FACE_BOUND('',#51431,.F.); +#51431 = EDGE_LOOP('',(#51432,#51433,#51434,#51435)); +#51432 = ORIENTED_EDGE('',*,*,#48618,.T.); +#51433 = ORIENTED_EDGE('',*,*,#48636,.T.); +#51434 = ORIENTED_EDGE('',*,*,#51419,.F.); +#51435 = ORIENTED_EDGE('',*,*,#48527,.F.); +#51436 = PLANE('',#51437); +#51437 = AXIS2_PLACEMENT_3D('',#51438,#51439,#51440); +#51438 = CARTESIAN_POINT('',(2.298480775301,-0.43,0.742364817767)); +#51439 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#51440 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#51441 = ADVANCED_FACE('',(#51442),#51453,.T.); +#51442 = FACE_BOUND('',#51443,.T.); +#51443 = EDGE_LOOP('',(#51444,#51445,#51446,#51447)); +#51444 = ORIENTED_EDGE('',*,*,#48808,.T.); +#51445 = ORIENTED_EDGE('',*,*,#49675,.T.); +#51446 = ORIENTED_EDGE('',*,*,#48917,.F.); +#51447 = ORIENTED_EDGE('',*,*,#51448,.F.); +#51448 = EDGE_CURVE('',#48801,#48910,#51449,.T.); +#51449 = LINE('',#51450,#51451); +#51450 = CARTESIAN_POINT('',(2.495442325904,-1.7,0.7770944533)); +#51451 = VECTOR('',#51452,1.); +#51452 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51453 = CYLINDRICAL_SURFACE('',#51454,0.3); +#51454 = AXIS2_PLACEMENT_3D('',#51455,#51456,#51457); +#51455 = CARTESIAN_POINT('',(2.2,-1.7,0.725)); +#51456 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51457 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51458 = ADVANCED_FACE('',(#51459),#51470,.F.); +#51459 = FACE_BOUND('',#51460,.F.); +#51460 = EDGE_LOOP('',(#51461,#51467,#51468,#51469)); +#51461 = ORIENTED_EDGE('',*,*,#51462,.T.); +#51462 = EDGE_CURVE('',#48792,#48901,#51463,.T.); +#51463 = LINE('',#51464,#51465); +#51464 = CARTESIAN_POINT('',(2.5764581915,-1.7,0.282635182233)); +#51465 = VECTOR('',#51466,1.); +#51466 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51467 = ORIENTED_EDGE('',*,*,#48909,.T.); +#51468 = ORIENTED_EDGE('',*,*,#51448,.F.); +#51469 = ORIENTED_EDGE('',*,*,#48800,.F.); +#51470 = PLANE('',#51471); +#51471 = AXIS2_PLACEMENT_3D('',#51472,#51473,#51474); +#51472 = CARTESIAN_POINT('',(2.5764581915,-1.7,0.282635182233)); +#51473 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#51474 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#51475 = ADVANCED_FACE('',(#51476),#51487,.F.); +#51476 = FACE_BOUND('',#51477,.F.); +#51477 = EDGE_LOOP('',(#51478,#51484,#51485,#51486)); +#51478 = ORIENTED_EDGE('',*,*,#51479,.T.); +#51479 = EDGE_CURVE('',#48784,#48893,#51480,.T.); +#51480 = LINE('',#51481,#51482); +#51481 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.2)); +#51482 = VECTOR('',#51483,1.); +#51483 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51484 = ORIENTED_EDGE('',*,*,#48900,.T.); +#51485 = ORIENTED_EDGE('',*,*,#51462,.F.); +#51486 = ORIENTED_EDGE('',*,*,#48791,.F.); +#51487 = CYLINDRICAL_SURFACE('',#51488,0.1); +#51488 = AXIS2_PLACEMENT_3D('',#51489,#51490,#51491); +#51489 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.3)); +#51490 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51491 = DIRECTION('',(0.,0.,-1.)); +#51492 = ADVANCED_FACE('',(#51493),#51504,.F.); +#51493 = FACE_BOUND('',#51494,.F.); +#51494 = EDGE_LOOP('',(#51495,#51501,#51502,#51503)); +#51495 = ORIENTED_EDGE('',*,*,#51496,.T.); +#51496 = EDGE_CURVE('',#48776,#48885,#51497,.T.); +#51497 = LINE('',#51498,#51499); +#51498 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#51499 = VECTOR('',#51500,1.); +#51500 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51501 = ORIENTED_EDGE('',*,*,#48892,.T.); +#51502 = ORIENTED_EDGE('',*,*,#51479,.F.); +#51503 = ORIENTED_EDGE('',*,*,#48783,.F.); +#51504 = PLANE('',#51505); +#51505 = AXIS2_PLACEMENT_3D('',#51506,#51507,#51508); +#51506 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#51507 = DIRECTION('',(0.,0.,-1.)); +#51508 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51509 = ADVANCED_FACE('',(#51510),#51521,.F.); +#51510 = FACE_BOUND('',#51511,.F.); +#51511 = EDGE_LOOP('',(#51512,#51518,#51519,#51520)); +#51512 = ORIENTED_EDGE('',*,*,#51513,.T.); +#51513 = EDGE_CURVE('',#48768,#48877,#51514,.T.); +#51514 = LINE('',#51515,#51516); +#51515 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#51516 = VECTOR('',#51517,1.); +#51517 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51518 = ORIENTED_EDGE('',*,*,#48884,.T.); +#51519 = ORIENTED_EDGE('',*,*,#51496,.F.); +#51520 = ORIENTED_EDGE('',*,*,#48775,.F.); +#51521 = PLANE('',#51522); +#51522 = AXIS2_PLACEMENT_3D('',#51523,#51524,#51525); +#51523 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#51524 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51525 = DIRECTION('',(0.,0.,1.)); +#51526 = ADVANCED_FACE('',(#51527),#51538,.F.); +#51527 = FACE_BOUND('',#51528,.F.); +#51528 = EDGE_LOOP('',(#51529,#51535,#51536,#51537)); +#51529 = ORIENTED_EDGE('',*,*,#51530,.T.); +#51530 = EDGE_CURVE('',#48759,#48868,#51531,.T.); +#51531 = LINE('',#51532,#51533); +#51532 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.)); +#51533 = VECTOR('',#51534,1.); +#51534 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51535 = ORIENTED_EDGE('',*,*,#48876,.T.); +#51536 = ORIENTED_EDGE('',*,*,#51513,.F.); +#51537 = ORIENTED_EDGE('',*,*,#48767,.F.); +#51538 = PLANE('',#51539); +#51539 = AXIS2_PLACEMENT_3D('',#51540,#51541,#51542); +#51540 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.)); +#51541 = DIRECTION('',(0.,0.,1.)); +#51542 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#51543 = ADVANCED_FACE('',(#51544),#51555,.T.); +#51544 = FACE_BOUND('',#51545,.T.); +#51545 = EDGE_LOOP('',(#51546,#51547,#51548,#51549)); +#51546 = ORIENTED_EDGE('',*,*,#48758,.T.); +#51547 = ORIENTED_EDGE('',*,*,#51530,.T.); +#51548 = ORIENTED_EDGE('',*,*,#48867,.F.); +#51549 = ORIENTED_EDGE('',*,*,#51550,.F.); +#51550 = EDGE_CURVE('',#48751,#48860,#51551,.T.); +#51551 = LINE('',#51552,#51553); +#51552 = CARTESIAN_POINT('',(2.379496640897,-1.7,0.2479055467)); +#51553 = VECTOR('',#51554,1.); +#51554 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51555 = CYLINDRICAL_SURFACE('',#51556,0.3); +#51556 = AXIS2_PLACEMENT_3D('',#51557,#51558,#51559); +#51557 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.3)); +#51558 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51559 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#51560 = ADVANCED_FACE('',(#51561),#51567,.F.); +#51561 = FACE_BOUND('',#51562,.F.); +#51562 = EDGE_LOOP('',(#51563,#51564,#51565,#51566)); +#51563 = ORIENTED_EDGE('',*,*,#48841,.T.); +#51564 = ORIENTED_EDGE('',*,*,#48859,.T.); +#51565 = ORIENTED_EDGE('',*,*,#51550,.F.); +#51566 = ORIENTED_EDGE('',*,*,#48750,.F.); +#51567 = PLANE('',#51568); +#51568 = AXIS2_PLACEMENT_3D('',#51569,#51570,#51571); +#51569 = CARTESIAN_POINT('',(2.298480775301,-1.7,0.742364817767)); +#51570 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#51571 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#51572 = ADVANCED_FACE('',(#51573),#51584,.T.); +#51573 = FACE_BOUND('',#51574,.T.); +#51574 = EDGE_LOOP('',(#51575,#51576,#51577,#51578)); +#51575 = ORIENTED_EDGE('',*,*,#49031,.T.); +#51576 = ORIENTED_EDGE('',*,*,#49694,.T.); +#51577 = ORIENTED_EDGE('',*,*,#49140,.F.); +#51578 = ORIENTED_EDGE('',*,*,#51579,.F.); +#51579 = EDGE_CURVE('',#49024,#49133,#51580,.T.); +#51580 = LINE('',#51581,#51582); +#51581 = CARTESIAN_POINT('',(2.495442325904,-2.97,0.7770944533)); +#51582 = VECTOR('',#51583,1.); +#51583 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51584 = CYLINDRICAL_SURFACE('',#51585,0.3); +#51585 = AXIS2_PLACEMENT_3D('',#51586,#51587,#51588); +#51586 = CARTESIAN_POINT('',(2.2,-2.97,0.725)); +#51587 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51588 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51589 = ADVANCED_FACE('',(#51590),#51601,.F.); +#51590 = FACE_BOUND('',#51591,.F.); +#51591 = EDGE_LOOP('',(#51592,#51598,#51599,#51600)); +#51592 = ORIENTED_EDGE('',*,*,#51593,.T.); +#51593 = EDGE_CURVE('',#49015,#49124,#51594,.T.); +#51594 = LINE('',#51595,#51596); +#51595 = CARTESIAN_POINT('',(2.5764581915,-2.97,0.282635182233)); +#51596 = VECTOR('',#51597,1.); +#51597 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51598 = ORIENTED_EDGE('',*,*,#49132,.T.); +#51599 = ORIENTED_EDGE('',*,*,#51579,.F.); +#51600 = ORIENTED_EDGE('',*,*,#49023,.F.); +#51601 = PLANE('',#51602); +#51602 = AXIS2_PLACEMENT_3D('',#51603,#51604,#51605); +#51603 = CARTESIAN_POINT('',(2.5764581915,-2.97,0.282635182233)); +#51604 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#51605 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#51606 = ADVANCED_FACE('',(#51607),#51618,.F.); +#51607 = FACE_BOUND('',#51608,.F.); +#51608 = EDGE_LOOP('',(#51609,#51615,#51616,#51617)); +#51609 = ORIENTED_EDGE('',*,*,#51610,.T.); +#51610 = EDGE_CURVE('',#49007,#49116,#51611,.T.); +#51611 = LINE('',#51612,#51613); +#51612 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.2)); +#51613 = VECTOR('',#51614,1.); +#51614 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51615 = ORIENTED_EDGE('',*,*,#49123,.T.); +#51616 = ORIENTED_EDGE('',*,*,#51593,.F.); +#51617 = ORIENTED_EDGE('',*,*,#49014,.F.); +#51618 = CYLINDRICAL_SURFACE('',#51619,0.1); +#51619 = AXIS2_PLACEMENT_3D('',#51620,#51621,#51622); +#51620 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.3)); +#51621 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51622 = DIRECTION('',(0.,0.,-1.)); +#51623 = ADVANCED_FACE('',(#51624),#51635,.F.); +#51624 = FACE_BOUND('',#51625,.F.); +#51625 = EDGE_LOOP('',(#51626,#51632,#51633,#51634)); +#51626 = ORIENTED_EDGE('',*,*,#51627,.T.); +#51627 = EDGE_CURVE('',#48999,#49108,#51628,.T.); +#51628 = LINE('',#51629,#51630); +#51629 = CARTESIAN_POINT('',(3.,-2.97,0.2)); +#51630 = VECTOR('',#51631,1.); +#51631 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51632 = ORIENTED_EDGE('',*,*,#49115,.T.); +#51633 = ORIENTED_EDGE('',*,*,#51610,.F.); +#51634 = ORIENTED_EDGE('',*,*,#49006,.F.); +#51635 = PLANE('',#51636); +#51636 = AXIS2_PLACEMENT_3D('',#51637,#51638,#51639); +#51637 = CARTESIAN_POINT('',(3.,-2.97,0.2)); +#51638 = DIRECTION('',(0.,0.,-1.)); +#51639 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51640 = ADVANCED_FACE('',(#51641),#51652,.F.); +#51641 = FACE_BOUND('',#51642,.F.); +#51642 = EDGE_LOOP('',(#51643,#51649,#51650,#51651)); +#51643 = ORIENTED_EDGE('',*,*,#51644,.T.); +#51644 = EDGE_CURVE('',#48991,#49100,#51645,.T.); +#51645 = LINE('',#51646,#51647); +#51646 = CARTESIAN_POINT('',(3.,-2.97,0.)); +#51647 = VECTOR('',#51648,1.); +#51648 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51649 = ORIENTED_EDGE('',*,*,#49107,.T.); +#51650 = ORIENTED_EDGE('',*,*,#51627,.F.); +#51651 = ORIENTED_EDGE('',*,*,#48998,.F.); +#51652 = PLANE('',#51653); +#51653 = AXIS2_PLACEMENT_3D('',#51654,#51655,#51656); +#51654 = CARTESIAN_POINT('',(3.,-2.97,0.)); +#51655 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51656 = DIRECTION('',(0.,0.,1.)); +#51657 = ADVANCED_FACE('',(#51658),#51669,.F.); +#51658 = FACE_BOUND('',#51659,.F.); +#51659 = EDGE_LOOP('',(#51660,#51666,#51667,#51668)); +#51660 = ORIENTED_EDGE('',*,*,#51661,.T.); +#51661 = EDGE_CURVE('',#48982,#49091,#51662,.T.); +#51662 = LINE('',#51663,#51664); +#51663 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.)); +#51664 = VECTOR('',#51665,1.); +#51665 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51666 = ORIENTED_EDGE('',*,*,#49099,.T.); +#51667 = ORIENTED_EDGE('',*,*,#51644,.F.); +#51668 = ORIENTED_EDGE('',*,*,#48990,.F.); +#51669 = PLANE('',#51670); +#51670 = AXIS2_PLACEMENT_3D('',#51671,#51672,#51673); +#51671 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.)); +#51672 = DIRECTION('',(0.,0.,1.)); +#51673 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#51674 = ADVANCED_FACE('',(#51675),#51686,.T.); +#51675 = FACE_BOUND('',#51676,.T.); +#51676 = EDGE_LOOP('',(#51677,#51678,#51679,#51680)); +#51677 = ORIENTED_EDGE('',*,*,#48981,.T.); +#51678 = ORIENTED_EDGE('',*,*,#51661,.T.); +#51679 = ORIENTED_EDGE('',*,*,#49090,.F.); +#51680 = ORIENTED_EDGE('',*,*,#51681,.F.); +#51681 = EDGE_CURVE('',#48974,#49083,#51682,.T.); +#51682 = LINE('',#51683,#51684); +#51683 = CARTESIAN_POINT('',(2.379496640897,-2.97,0.2479055467)); +#51684 = VECTOR('',#51685,1.); +#51685 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51686 = CYLINDRICAL_SURFACE('',#51687,0.3); +#51687 = AXIS2_PLACEMENT_3D('',#51688,#51689,#51690); +#51688 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.3)); +#51689 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51690 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#51691 = ADVANCED_FACE('',(#51692),#51698,.F.); +#51692 = FACE_BOUND('',#51693,.F.); +#51693 = EDGE_LOOP('',(#51694,#51695,#51696,#51697)); +#51694 = ORIENTED_EDGE('',*,*,#49064,.T.); +#51695 = ORIENTED_EDGE('',*,*,#49082,.T.); +#51696 = ORIENTED_EDGE('',*,*,#51681,.F.); +#51697 = ORIENTED_EDGE('',*,*,#48973,.F.); +#51698 = PLANE('',#51699); +#51699 = AXIS2_PLACEMENT_3D('',#51700,#51701,#51702); +#51700 = CARTESIAN_POINT('',(2.298480775301,-2.97,0.742364817767)); +#51701 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#51702 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#51703 = ADVANCED_FACE('',(#51704),#51715,.T.); +#51704 = FACE_BOUND('',#51705,.T.); +#51705 = EDGE_LOOP('',(#51706,#51707,#51708,#51709)); +#51706 = ORIENTED_EDGE('',*,*,#49254,.T.); +#51707 = ORIENTED_EDGE('',*,*,#49713,.T.); +#51708 = ORIENTED_EDGE('',*,*,#49363,.F.); +#51709 = ORIENTED_EDGE('',*,*,#51710,.F.); +#51710 = EDGE_CURVE('',#49247,#49356,#51711,.T.); +#51711 = LINE('',#51712,#51713); +#51712 = CARTESIAN_POINT('',(2.495442325904,-4.24,0.7770944533)); +#51713 = VECTOR('',#51714,1.); +#51714 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51715 = CYLINDRICAL_SURFACE('',#51716,0.3); +#51716 = AXIS2_PLACEMENT_3D('',#51717,#51718,#51719); +#51717 = CARTESIAN_POINT('',(2.2,-4.24,0.725)); +#51718 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51719 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51720 = ADVANCED_FACE('',(#51721),#51732,.F.); +#51721 = FACE_BOUND('',#51722,.F.); +#51722 = EDGE_LOOP('',(#51723,#51729,#51730,#51731)); +#51723 = ORIENTED_EDGE('',*,*,#51724,.T.); +#51724 = EDGE_CURVE('',#49238,#49347,#51725,.T.); +#51725 = LINE('',#51726,#51727); +#51726 = CARTESIAN_POINT('',(2.5764581915,-4.24,0.282635182233)); +#51727 = VECTOR('',#51728,1.); +#51728 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51729 = ORIENTED_EDGE('',*,*,#49355,.T.); +#51730 = ORIENTED_EDGE('',*,*,#51710,.F.); +#51731 = ORIENTED_EDGE('',*,*,#49246,.F.); +#51732 = PLANE('',#51733); +#51733 = AXIS2_PLACEMENT_3D('',#51734,#51735,#51736); +#51734 = CARTESIAN_POINT('',(2.5764581915,-4.24,0.282635182233)); +#51735 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#51736 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#51737 = ADVANCED_FACE('',(#51738),#51749,.F.); +#51738 = FACE_BOUND('',#51739,.F.); +#51739 = EDGE_LOOP('',(#51740,#51746,#51747,#51748)); +#51740 = ORIENTED_EDGE('',*,*,#51741,.T.); +#51741 = EDGE_CURVE('',#49230,#49339,#51742,.T.); +#51742 = LINE('',#51743,#51744); +#51743 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.2)); +#51744 = VECTOR('',#51745,1.); +#51745 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51746 = ORIENTED_EDGE('',*,*,#49346,.T.); +#51747 = ORIENTED_EDGE('',*,*,#51724,.F.); +#51748 = ORIENTED_EDGE('',*,*,#49237,.F.); +#51749 = CYLINDRICAL_SURFACE('',#51750,0.1); +#51750 = AXIS2_PLACEMENT_3D('',#51751,#51752,#51753); +#51751 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.3)); +#51752 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51753 = DIRECTION('',(0.,0.,-1.)); +#51754 = ADVANCED_FACE('',(#51755),#51766,.F.); +#51755 = FACE_BOUND('',#51756,.F.); +#51756 = EDGE_LOOP('',(#51757,#51763,#51764,#51765)); +#51757 = ORIENTED_EDGE('',*,*,#51758,.T.); +#51758 = EDGE_CURVE('',#49222,#49331,#51759,.T.); +#51759 = LINE('',#51760,#51761); +#51760 = CARTESIAN_POINT('',(3.,-4.24,0.2)); +#51761 = VECTOR('',#51762,1.); +#51762 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51763 = ORIENTED_EDGE('',*,*,#49338,.T.); +#51764 = ORIENTED_EDGE('',*,*,#51741,.F.); +#51765 = ORIENTED_EDGE('',*,*,#49229,.F.); +#51766 = PLANE('',#51767); +#51767 = AXIS2_PLACEMENT_3D('',#51768,#51769,#51770); +#51768 = CARTESIAN_POINT('',(3.,-4.24,0.2)); +#51769 = DIRECTION('',(0.,0.,-1.)); +#51770 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51771 = ADVANCED_FACE('',(#51772),#51783,.F.); +#51772 = FACE_BOUND('',#51773,.F.); +#51773 = EDGE_LOOP('',(#51774,#51780,#51781,#51782)); +#51774 = ORIENTED_EDGE('',*,*,#51775,.T.); +#51775 = EDGE_CURVE('',#49214,#49323,#51776,.T.); +#51776 = LINE('',#51777,#51778); +#51777 = CARTESIAN_POINT('',(3.,-4.24,0.)); +#51778 = VECTOR('',#51779,1.); +#51779 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51780 = ORIENTED_EDGE('',*,*,#49330,.T.); +#51781 = ORIENTED_EDGE('',*,*,#51758,.F.); +#51782 = ORIENTED_EDGE('',*,*,#49221,.F.); +#51783 = PLANE('',#51784); +#51784 = AXIS2_PLACEMENT_3D('',#51785,#51786,#51787); +#51785 = CARTESIAN_POINT('',(3.,-4.24,0.)); +#51786 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51787 = DIRECTION('',(0.,0.,1.)); +#51788 = ADVANCED_FACE('',(#51789),#51800,.F.); +#51789 = FACE_BOUND('',#51790,.F.); +#51790 = EDGE_LOOP('',(#51791,#51797,#51798,#51799)); +#51791 = ORIENTED_EDGE('',*,*,#51792,.T.); +#51792 = EDGE_CURVE('',#49205,#49314,#51793,.T.); +#51793 = LINE('',#51794,#51795); +#51794 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.)); +#51795 = VECTOR('',#51796,1.); +#51796 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51797 = ORIENTED_EDGE('',*,*,#49322,.T.); +#51798 = ORIENTED_EDGE('',*,*,#51775,.F.); +#51799 = ORIENTED_EDGE('',*,*,#49213,.F.); +#51800 = PLANE('',#51801); +#51801 = AXIS2_PLACEMENT_3D('',#51802,#51803,#51804); +#51802 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.)); +#51803 = DIRECTION('',(0.,0.,1.)); +#51804 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#51805 = ADVANCED_FACE('',(#51806),#51817,.T.); +#51806 = FACE_BOUND('',#51807,.T.); +#51807 = EDGE_LOOP('',(#51808,#51809,#51810,#51811)); +#51808 = ORIENTED_EDGE('',*,*,#49204,.T.); +#51809 = ORIENTED_EDGE('',*,*,#51792,.T.); +#51810 = ORIENTED_EDGE('',*,*,#49313,.F.); +#51811 = ORIENTED_EDGE('',*,*,#51812,.F.); +#51812 = EDGE_CURVE('',#49197,#49306,#51813,.T.); +#51813 = LINE('',#51814,#51815); +#51814 = CARTESIAN_POINT('',(2.379496640897,-4.24,0.2479055467)); +#51815 = VECTOR('',#51816,1.); +#51816 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51817 = CYLINDRICAL_SURFACE('',#51818,0.3); +#51818 = AXIS2_PLACEMENT_3D('',#51819,#51820,#51821); +#51819 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.3)); +#51820 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51821 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#51822 = ADVANCED_FACE('',(#51823),#51829,.F.); +#51823 = FACE_BOUND('',#51824,.F.); +#51824 = EDGE_LOOP('',(#51825,#51826,#51827,#51828)); +#51825 = ORIENTED_EDGE('',*,*,#49287,.T.); +#51826 = ORIENTED_EDGE('',*,*,#49305,.T.); +#51827 = ORIENTED_EDGE('',*,*,#51812,.F.); +#51828 = ORIENTED_EDGE('',*,*,#49196,.F.); +#51829 = PLANE('',#51830); +#51830 = AXIS2_PLACEMENT_3D('',#51831,#51832,#51833); +#51831 = CARTESIAN_POINT('',(2.298480775301,-4.24,0.742364817767)); +#51832 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#51833 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#51834 = ADVANCED_FACE('',(#51835),#51838,.F.); +#51835 = FACE_BOUND('',#51836,.T.); +#51836 = EDGE_LOOP('',(#51837)); +#51837 = ORIENTED_EDGE('',*,*,#49565,.F.); +#51838 = PLANE('',#51839); +#51839 = AXIS2_PLACEMENT_3D('',#51840,#51841,#51842); +#51840 = CARTESIAN_POINT('',(-0.960171280765,3.960171280765,1.75)); +#51841 = DIRECTION('',(0.,0.,-1.)); +#51842 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#51847)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#51844,#51845,#51846)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#51844 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#51845 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#51846 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#51847 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#51844, + 'distance_accuracy_value','confusion accuracy'); +#51848 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#51849,#51851); +#51849 = ( REPRESENTATION_RELATIONSHIP('','',#43636,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#51850) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#51850 = ITEM_DEFINED_TRANSFORMATION('','',#11,#195); +#51851 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #51852); +#51852 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('46','U2','',#5,#43631,$); +#51853 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#43633)); +#51854 = SHAPE_DEFINITION_REPRESENTATION(#51855,#51861); +#51855 = PRODUCT_DEFINITION_SHAPE('','',#51856); +#51856 = PRODUCT_DEFINITION('design','',#51857,#51860); +#51857 = PRODUCT_DEFINITION_FORMATION('','',#51858); +#51858 = PRODUCT('SOT-223','SOT-223','',(#51859)); +#51859 = PRODUCT_CONTEXT('',#2,'mechanical'); +#51860 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#51861 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#51862),#54114); +#51862 = MANIFOLD_SOLID_BREP('',#51863); +#51863 = CLOSED_SHELL('',(#51864,#51950,#51981,#52004,#52034,#52065, + #52096,#52127,#52158,#52189,#52219,#52242,#52275,#52298,#52321, + #52377,#52469,#52561,#52578,#52609,#52701,#52793,#52810,#52841, + #52933,#53025,#53042,#53098,#53115,#53146,#53163,#53201,#53232, + #53255,#53299,#53318,#53335,#53352,#53369,#53386,#53403,#53420, + #53437,#53449,#53468,#53485,#53502,#53519,#53536,#53553,#53570, + #53587,#53599,#53618,#53635,#53652,#53669,#53686,#53703,#53720, + #53737,#53749,#53766,#53851,#53936,#53953,#53970,#53993,#54010, + #54027,#54044,#54061,#54078,#54095,#54107)); +#51864 = ADVANCED_FACE('',(#51865),#51945,.T.); +#51865 = FACE_BOUND('',#51866,.T.); +#51866 = EDGE_LOOP('',(#51867,#51877,#51884,#51892,#51900,#51908,#51916, + #51924,#51932,#51940)); +#51867 = ORIENTED_EDGE('',*,*,#51868,.T.); +#51868 = EDGE_CURVE('',#51869,#51871,#51873,.T.); +#51869 = VERTEX_POINT('',#51870); +#51870 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#51871 = VERTEX_POINT('',#51872); +#51872 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#51873 = LINE('',#51874,#51875); +#51874 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#51875 = VECTOR('',#51876,1.); +#51876 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51877 = ORIENTED_EDGE('',*,*,#51878,.T.); +#51878 = EDGE_CURVE('',#51871,#51879,#51881,.T.); +#51879 = VERTEX_POINT('',#51880); +#51880 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#51881 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#51882,#51883),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#51882 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#51883 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#51884 = ORIENTED_EDGE('',*,*,#51885,.F.); +#51885 = EDGE_CURVE('',#51886,#51879,#51888,.T.); +#51886 = VERTEX_POINT('',#51887); +#51887 = CARTESIAN_POINT('',(-1.75,-2.68345,0.765)); +#51888 = LINE('',#51889,#51890); +#51889 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51890 = VECTOR('',#51891,1.); +#51891 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51892 = ORIENTED_EDGE('',*,*,#51893,.F.); +#51893 = EDGE_CURVE('',#51894,#51886,#51896,.T.); +#51894 = VERTEX_POINT('',#51895); +#51895 = CARTESIAN_POINT('',(-1.75,-1.91675,0.765)); +#51896 = LINE('',#51897,#51898); +#51897 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51898 = VECTOR('',#51899,1.); +#51899 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51900 = ORIENTED_EDGE('',*,*,#51901,.F.); +#51901 = EDGE_CURVE('',#51902,#51894,#51904,.T.); +#51902 = VERTEX_POINT('',#51903); +#51903 = CARTESIAN_POINT('',(-1.75,-0.38335,0.765)); +#51904 = LINE('',#51905,#51906); +#51905 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51906 = VECTOR('',#51907,1.); +#51907 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51908 = ORIENTED_EDGE('',*,*,#51909,.F.); +#51909 = EDGE_CURVE('',#51910,#51902,#51912,.T.); +#51910 = VERTEX_POINT('',#51911); +#51911 = CARTESIAN_POINT('',(-1.75,0.38335,0.765)); +#51912 = LINE('',#51913,#51914); +#51913 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51914 = VECTOR('',#51915,1.); +#51915 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51916 = ORIENTED_EDGE('',*,*,#51917,.F.); +#51917 = EDGE_CURVE('',#51918,#51910,#51920,.T.); +#51918 = VERTEX_POINT('',#51919); +#51919 = CARTESIAN_POINT('',(-1.75,1.91675,0.765)); +#51920 = LINE('',#51921,#51922); +#51921 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51922 = VECTOR('',#51923,1.); +#51923 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51924 = ORIENTED_EDGE('',*,*,#51925,.F.); +#51925 = EDGE_CURVE('',#51926,#51918,#51928,.T.); +#51926 = VERTEX_POINT('',#51927); +#51927 = CARTESIAN_POINT('',(-1.75,2.68345,0.765)); +#51928 = LINE('',#51929,#51930); +#51929 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51930 = VECTOR('',#51931,1.); +#51931 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51932 = ORIENTED_EDGE('',*,*,#51933,.F.); +#51933 = EDGE_CURVE('',#51934,#51926,#51936,.T.); +#51934 = VERTEX_POINT('',#51935); +#51935 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51936 = LINE('',#51937,#51938); +#51937 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51938 = VECTOR('',#51939,1.); +#51939 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51940 = ORIENTED_EDGE('',*,*,#51941,.F.); +#51941 = EDGE_CURVE('',#51869,#51934,#51942,.T.); +#51942 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#51943,#51944),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#51943 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#51944 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51945 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#51946,#51947) + ,(#51948,#51949 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#51946 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#51947 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#51948 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#51949 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#51950 = ADVANCED_FACE('',(#51951),#51976,.T.); +#51951 = FACE_BOUND('',#51952,.F.); +#51952 = EDGE_LOOP('',(#51953,#51954,#51962,#51970)); +#51953 = ORIENTED_EDGE('',*,*,#51868,.T.); +#51954 = ORIENTED_EDGE('',*,*,#51955,.T.); +#51955 = EDGE_CURVE('',#51871,#51956,#51958,.T.); +#51956 = VERTEX_POINT('',#51957); +#51957 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#51958 = LINE('',#51959,#51960); +#51959 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#51960 = VECTOR('',#51961,1.); +#51961 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#51962 = ORIENTED_EDGE('',*,*,#51963,.T.); +#51963 = EDGE_CURVE('',#51956,#51964,#51966,.T.); +#51964 = VERTEX_POINT('',#51965); +#51965 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#51966 = LINE('',#51967,#51968); +#51967 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#51968 = VECTOR('',#51969,1.); +#51969 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51970 = ORIENTED_EDGE('',*,*,#51971,.T.); +#51971 = EDGE_CURVE('',#51964,#51869,#51972,.T.); +#51972 = LINE('',#51973,#51974); +#51973 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#51974 = VECTOR('',#51975,1.); +#51975 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51976 = PLANE('',#51977); +#51977 = AXIS2_PLACEMENT_3D('',#51978,#51979,#51980); +#51978 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#51979 = DIRECTION('',(0.,0.,-1.)); +#51980 = DIRECTION('',(0.464692418444,-0.885472165706,0.)); +#51981 = ADVANCED_FACE('',(#51982),#51999,.T.); +#51982 = FACE_BOUND('',#51983,.T.); +#51983 = EDGE_LOOP('',(#51984,#51985,#51992,#51998)); +#51984 = ORIENTED_EDGE('',*,*,#51955,.T.); +#51985 = ORIENTED_EDGE('',*,*,#51986,.T.); +#51986 = EDGE_CURVE('',#51956,#51987,#51989,.T.); +#51987 = VERTEX_POINT('',#51988); +#51988 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#51989 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#51990,#51991),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#51990 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#51991 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#51992 = ORIENTED_EDGE('',*,*,#51993,.F.); +#51993 = EDGE_CURVE('',#51879,#51987,#51994,.T.); +#51994 = LINE('',#51995,#51996); +#51995 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#51996 = VECTOR('',#51997,1.); +#51997 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#51998 = ORIENTED_EDGE('',*,*,#51878,.F.); +#51999 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#52000,#52001) + ,(#52002,#52003 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52000 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#52001 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#52002 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#52003 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#52004 = ADVANCED_FACE('',(#52005),#52029,.T.); +#52005 = FACE_BOUND('',#52006,.T.); +#52006 = EDGE_LOOP('',(#52007,#52014,#52015,#52023)); +#52007 = ORIENTED_EDGE('',*,*,#52008,.F.); +#52008 = EDGE_CURVE('',#51934,#52009,#52011,.T.); +#52009 = VERTEX_POINT('',#52010); +#52010 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52011 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52012,#52013),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52012 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#52013 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52014 = ORIENTED_EDGE('',*,*,#51933,.T.); +#52015 = ORIENTED_EDGE('',*,*,#52016,.F.); +#52016 = EDGE_CURVE('',#52017,#51926,#52019,.T.); +#52017 = VERTEX_POINT('',#52018); +#52018 = CARTESIAN_POINT('',(-1.75,2.68345,1.035)); +#52019 = LINE('',#52020,#52021); +#52020 = CARTESIAN_POINT('',(-1.75,2.68345,0.773709888363)); +#52021 = VECTOR('',#52022,1.); +#52022 = DIRECTION('',(0.,0.,-1.)); +#52023 = ORIENTED_EDGE('',*,*,#52024,.F.); +#52024 = EDGE_CURVE('',#52009,#52017,#52025,.T.); +#52025 = LINE('',#52026,#52027); +#52026 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52027 = VECTOR('',#52028,1.); +#52028 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52029 = PLANE('',#52030); +#52030 = AXIS2_PLACEMENT_3D('',#52031,#52032,#52033); +#52031 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52032 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52033 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52034 = ADVANCED_FACE('',(#52035),#52060,.F.); +#52035 = FACE_BOUND('',#52036,.F.); +#52036 = EDGE_LOOP('',(#52037,#52045,#52046,#52054)); +#52037 = ORIENTED_EDGE('',*,*,#52038,.F.); +#52038 = EDGE_CURVE('',#51918,#52039,#52041,.T.); +#52039 = VERTEX_POINT('',#52040); +#52040 = CARTESIAN_POINT('',(-2.25,1.91675,0.765)); +#52041 = LINE('',#52042,#52043); +#52042 = CARTESIAN_POINT('',(-1.72,1.91675,0.765)); +#52043 = VECTOR('',#52044,1.); +#52044 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52045 = ORIENTED_EDGE('',*,*,#51925,.F.); +#52046 = ORIENTED_EDGE('',*,*,#52047,.T.); +#52047 = EDGE_CURVE('',#51926,#52048,#52050,.T.); +#52048 = VERTEX_POINT('',#52049); +#52049 = CARTESIAN_POINT('',(-2.25,2.68345,0.765)); +#52050 = LINE('',#52051,#52052); +#52051 = CARTESIAN_POINT('',(-1.72,2.68345,0.765)); +#52052 = VECTOR('',#52053,1.); +#52053 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52054 = ORIENTED_EDGE('',*,*,#52055,.F.); +#52055 = EDGE_CURVE('',#52039,#52048,#52056,.T.); +#52056 = LINE('',#52057,#52058); +#52057 = CARTESIAN_POINT('',(-2.25,1.91675,0.765)); +#52058 = VECTOR('',#52059,1.); +#52059 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52060 = PLANE('',#52061); +#52061 = AXIS2_PLACEMENT_3D('',#52062,#52063,#52064); +#52062 = CARTESIAN_POINT('',(-1.72,1.91675,0.765)); +#52063 = DIRECTION('',(0.,0.,1.)); +#52064 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52065 = ADVANCED_FACE('',(#52066),#52091,.T.); +#52066 = FACE_BOUND('',#52067,.T.); +#52067 = EDGE_LOOP('',(#52068,#52076,#52077,#52085)); +#52068 = ORIENTED_EDGE('',*,*,#52069,.T.); +#52069 = EDGE_CURVE('',#52070,#51918,#52072,.T.); +#52070 = VERTEX_POINT('',#52071); +#52071 = CARTESIAN_POINT('',(-1.75,1.91675,1.035)); +#52072 = LINE('',#52073,#52074); +#52073 = CARTESIAN_POINT('',(-1.75,1.91675,0.773709888363)); +#52074 = VECTOR('',#52075,1.); +#52075 = DIRECTION('',(0.,0.,-1.)); +#52076 = ORIENTED_EDGE('',*,*,#51917,.T.); +#52077 = ORIENTED_EDGE('',*,*,#52078,.F.); +#52078 = EDGE_CURVE('',#52079,#51910,#52081,.T.); +#52079 = VERTEX_POINT('',#52080); +#52080 = CARTESIAN_POINT('',(-1.75,0.38335,1.035)); +#52081 = LINE('',#52082,#52083); +#52082 = CARTESIAN_POINT('',(-1.75,0.38335,0.773709888363)); +#52083 = VECTOR('',#52084,1.); +#52084 = DIRECTION('',(0.,0.,-1.)); +#52085 = ORIENTED_EDGE('',*,*,#52086,.F.); +#52086 = EDGE_CURVE('',#52070,#52079,#52087,.T.); +#52087 = LINE('',#52088,#52089); +#52088 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52089 = VECTOR('',#52090,1.); +#52090 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52091 = PLANE('',#52092); +#52092 = AXIS2_PLACEMENT_3D('',#52093,#52094,#52095); +#52093 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52094 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52095 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52096 = ADVANCED_FACE('',(#52097),#52122,.F.); +#52097 = FACE_BOUND('',#52098,.F.); +#52098 = EDGE_LOOP('',(#52099,#52107,#52108,#52116)); +#52099 = ORIENTED_EDGE('',*,*,#52100,.F.); +#52100 = EDGE_CURVE('',#51902,#52101,#52103,.T.); +#52101 = VERTEX_POINT('',#52102); +#52102 = CARTESIAN_POINT('',(-2.25,-0.38335,0.765)); +#52103 = LINE('',#52104,#52105); +#52104 = CARTESIAN_POINT('',(-1.72,-0.38335,0.765)); +#52105 = VECTOR('',#52106,1.); +#52106 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52107 = ORIENTED_EDGE('',*,*,#51909,.F.); +#52108 = ORIENTED_EDGE('',*,*,#52109,.T.); +#52109 = EDGE_CURVE('',#51910,#52110,#52112,.T.); +#52110 = VERTEX_POINT('',#52111); +#52111 = CARTESIAN_POINT('',(-2.25,0.38335,0.765)); +#52112 = LINE('',#52113,#52114); +#52113 = CARTESIAN_POINT('',(-1.72,0.38335,0.765)); +#52114 = VECTOR('',#52115,1.); +#52115 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52116 = ORIENTED_EDGE('',*,*,#52117,.F.); +#52117 = EDGE_CURVE('',#52101,#52110,#52118,.T.); +#52118 = LINE('',#52119,#52120); +#52119 = CARTESIAN_POINT('',(-2.25,-0.38335,0.765)); +#52120 = VECTOR('',#52121,1.); +#52121 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52122 = PLANE('',#52123); +#52123 = AXIS2_PLACEMENT_3D('',#52124,#52125,#52126); +#52124 = CARTESIAN_POINT('',(-1.72,-0.38335,0.765)); +#52125 = DIRECTION('',(0.,0.,1.)); +#52126 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52127 = ADVANCED_FACE('',(#52128),#52153,.T.); +#52128 = FACE_BOUND('',#52129,.T.); +#52129 = EDGE_LOOP('',(#52130,#52138,#52139,#52147)); +#52130 = ORIENTED_EDGE('',*,*,#52131,.T.); +#52131 = EDGE_CURVE('',#52132,#51902,#52134,.T.); +#52132 = VERTEX_POINT('',#52133); +#52133 = CARTESIAN_POINT('',(-1.75,-0.38335,1.035)); +#52134 = LINE('',#52135,#52136); +#52135 = CARTESIAN_POINT('',(-1.75,-0.38335,0.773709888363)); +#52136 = VECTOR('',#52137,1.); +#52137 = DIRECTION('',(0.,0.,-1.)); +#52138 = ORIENTED_EDGE('',*,*,#51901,.T.); +#52139 = ORIENTED_EDGE('',*,*,#52140,.F.); +#52140 = EDGE_CURVE('',#52141,#51894,#52143,.T.); +#52141 = VERTEX_POINT('',#52142); +#52142 = CARTESIAN_POINT('',(-1.75,-1.91675,1.035)); +#52143 = LINE('',#52144,#52145); +#52144 = CARTESIAN_POINT('',(-1.75,-1.91675,0.773709888363)); +#52145 = VECTOR('',#52146,1.); +#52146 = DIRECTION('',(0.,0.,-1.)); +#52147 = ORIENTED_EDGE('',*,*,#52148,.F.); +#52148 = EDGE_CURVE('',#52132,#52141,#52149,.T.); +#52149 = LINE('',#52150,#52151); +#52150 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52151 = VECTOR('',#52152,1.); +#52152 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52153 = PLANE('',#52154); +#52154 = AXIS2_PLACEMENT_3D('',#52155,#52156,#52157); +#52155 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52156 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52157 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52158 = ADVANCED_FACE('',(#52159),#52184,.F.); +#52159 = FACE_BOUND('',#52160,.F.); +#52160 = EDGE_LOOP('',(#52161,#52169,#52170,#52178)); +#52161 = ORIENTED_EDGE('',*,*,#52162,.F.); +#52162 = EDGE_CURVE('',#51886,#52163,#52165,.T.); +#52163 = VERTEX_POINT('',#52164); +#52164 = CARTESIAN_POINT('',(-2.25,-2.68345,0.765)); +#52165 = LINE('',#52166,#52167); +#52166 = CARTESIAN_POINT('',(-1.72,-2.68345,0.765)); +#52167 = VECTOR('',#52168,1.); +#52168 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52169 = ORIENTED_EDGE('',*,*,#51893,.F.); +#52170 = ORIENTED_EDGE('',*,*,#52171,.T.); +#52171 = EDGE_CURVE('',#51894,#52172,#52174,.T.); +#52172 = VERTEX_POINT('',#52173); +#52173 = CARTESIAN_POINT('',(-2.25,-1.91675,0.765)); +#52174 = LINE('',#52175,#52176); +#52175 = CARTESIAN_POINT('',(-1.72,-1.91675,0.765)); +#52176 = VECTOR('',#52177,1.); +#52177 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52178 = ORIENTED_EDGE('',*,*,#52179,.F.); +#52179 = EDGE_CURVE('',#52163,#52172,#52180,.T.); +#52180 = LINE('',#52181,#52182); +#52181 = CARTESIAN_POINT('',(-2.25,-2.68345,0.765)); +#52182 = VECTOR('',#52183,1.); +#52183 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52184 = PLANE('',#52185); +#52185 = AXIS2_PLACEMENT_3D('',#52186,#52187,#52188); +#52186 = CARTESIAN_POINT('',(-1.72,-2.68345,0.765)); +#52187 = DIRECTION('',(0.,0.,1.)); +#52188 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52189 = ADVANCED_FACE('',(#52190),#52214,.T.); +#52190 = FACE_BOUND('',#52191,.T.); +#52191 = EDGE_LOOP('',(#52192,#52200,#52201,#52208)); +#52192 = ORIENTED_EDGE('',*,*,#52193,.T.); +#52193 = EDGE_CURVE('',#52194,#51886,#52196,.T.); +#52194 = VERTEX_POINT('',#52195); +#52195 = CARTESIAN_POINT('',(-1.75,-2.68345,1.035)); +#52196 = LINE('',#52197,#52198); +#52197 = CARTESIAN_POINT('',(-1.75,-2.68345,0.773709888363)); +#52198 = VECTOR('',#52199,1.); +#52199 = DIRECTION('',(0.,0.,-1.)); +#52200 = ORIENTED_EDGE('',*,*,#51885,.T.); +#52201 = ORIENTED_EDGE('',*,*,#52202,.T.); +#52202 = EDGE_CURVE('',#51879,#52203,#52205,.T.); +#52203 = VERTEX_POINT('',#52204); +#52204 = CARTESIAN_POINT('',(-1.75,-3.25,1.035)); +#52205 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52206,#52207),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52206 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#52207 = CARTESIAN_POINT('',(-1.75,-3.25,1.035)); +#52208 = ORIENTED_EDGE('',*,*,#52209,.F.); +#52209 = EDGE_CURVE('',#52194,#52203,#52210,.T.); +#52210 = LINE('',#52211,#52212); +#52211 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52212 = VECTOR('',#52213,1.); +#52213 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52214 = PLANE('',#52215); +#52215 = AXIS2_PLACEMENT_3D('',#52216,#52217,#52218); +#52216 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#52217 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52218 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52219 = ADVANCED_FACE('',(#52220),#52237,.T.); +#52220 = FACE_BOUND('',#52221,.T.); +#52221 = EDGE_LOOP('',(#52222,#52223,#52224,#52232)); +#52222 = ORIENTED_EDGE('',*,*,#51971,.T.); +#52223 = ORIENTED_EDGE('',*,*,#51941,.T.); +#52224 = ORIENTED_EDGE('',*,*,#52225,.F.); +#52225 = EDGE_CURVE('',#52226,#51934,#52228,.T.); +#52226 = VERTEX_POINT('',#52227); +#52227 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#52228 = LINE('',#52229,#52230); +#52229 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#52230 = VECTOR('',#52231,1.); +#52231 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52232 = ORIENTED_EDGE('',*,*,#52233,.F.); +#52233 = EDGE_CURVE('',#51964,#52226,#52234,.T.); +#52234 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52235,#52236),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52235 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#52236 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#52237 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#52238,#52239) + ,(#52240,#52241 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52238 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#52239 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#52240 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#52241 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#52242 = ADVANCED_FACE('',(#52243),#52270,.T.); +#52243 = FACE_BOUND('',#52244,.T.); +#52244 = EDGE_LOOP('',(#52245,#52246,#52247,#52255,#52263,#52269)); +#52245 = ORIENTED_EDGE('',*,*,#51963,.T.); +#52246 = ORIENTED_EDGE('',*,*,#52233,.T.); +#52247 = ORIENTED_EDGE('',*,*,#52248,.F.); +#52248 = EDGE_CURVE('',#52249,#52226,#52251,.T.); +#52249 = VERTEX_POINT('',#52250); +#52250 = CARTESIAN_POINT('',(1.75,1.15005,0.765)); +#52251 = LINE('',#52252,#52253); +#52252 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#52253 = VECTOR('',#52254,1.); +#52254 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52255 = ORIENTED_EDGE('',*,*,#52256,.F.); +#52256 = EDGE_CURVE('',#52257,#52249,#52259,.T.); +#52257 = VERTEX_POINT('',#52258); +#52258 = CARTESIAN_POINT('',(1.75,-1.15005,0.765)); +#52259 = LINE('',#52260,#52261); +#52260 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#52261 = VECTOR('',#52262,1.); +#52262 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52263 = ORIENTED_EDGE('',*,*,#52264,.F.); +#52264 = EDGE_CURVE('',#51987,#52257,#52265,.T.); +#52265 = LINE('',#52266,#52267); +#52266 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#52267 = VECTOR('',#52268,1.); +#52268 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52269 = ORIENTED_EDGE('',*,*,#51986,.F.); +#52270 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#52271,#52272) + ,(#52273,#52274 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#52271 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#52272 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#52273 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#52274 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#52275 = ADVANCED_FACE('',(#52276),#52293,.T.); +#52276 = FACE_BOUND('',#52277,.T.); +#52277 = EDGE_LOOP('',(#52278,#52279,#52286,#52292)); +#52278 = ORIENTED_EDGE('',*,*,#51993,.T.); +#52279 = ORIENTED_EDGE('',*,*,#52280,.T.); +#52280 = EDGE_CURVE('',#51987,#52281,#52283,.T.); +#52281 = VERTEX_POINT('',#52282); +#52282 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#52283 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52284,#52285),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52284 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#52285 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#52286 = ORIENTED_EDGE('',*,*,#52287,.F.); +#52287 = EDGE_CURVE('',#52203,#52281,#52288,.T.); +#52288 = LINE('',#52289,#52290); +#52289 = CARTESIAN_POINT('',(-1.75,-3.25,1.035)); +#52290 = VECTOR('',#52291,1.); +#52291 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#52292 = ORIENTED_EDGE('',*,*,#52202,.F.); +#52293 = PLANE('',#52294); +#52294 = AXIS2_PLACEMENT_3D('',#52295,#52296,#52297); +#52295 = CARTESIAN_POINT('',(-1.75,-3.25,1.035)); +#52296 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52297 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#52298 = ADVANCED_FACE('',(#52299),#52316,.T.); +#52299 = FACE_BOUND('',#52300,.T.); +#52300 = EDGE_LOOP('',(#52301,#52302,#52303,#52311)); +#52301 = ORIENTED_EDGE('',*,*,#52225,.T.); +#52302 = ORIENTED_EDGE('',*,*,#52008,.T.); +#52303 = ORIENTED_EDGE('',*,*,#52304,.F.); +#52304 = EDGE_CURVE('',#52305,#52009,#52307,.T.); +#52305 = VERTEX_POINT('',#52306); +#52306 = CARTESIAN_POINT('',(1.75,3.25,1.035)); +#52307 = LINE('',#52308,#52309); +#52308 = CARTESIAN_POINT('',(1.75,3.25,1.035)); +#52309 = VECTOR('',#52310,1.); +#52310 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52311 = ORIENTED_EDGE('',*,*,#52312,.F.); +#52312 = EDGE_CURVE('',#52226,#52305,#52313,.T.); +#52313 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#52314,#52315),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#52314 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#52315 = CARTESIAN_POINT('',(1.75,3.25,1.035)); +#52316 = PLANE('',#52317); +#52317 = AXIS2_PLACEMENT_3D('',#52318,#52319,#52320); +#52318 = CARTESIAN_POINT('',(1.75,3.25,1.035)); +#52319 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52320 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52321 = ADVANCED_FACE('',(#52322),#52372,.T.); +#52322 = FACE_BOUND('',#52323,.T.); +#52323 = EDGE_LOOP('',(#52324,#52325,#52326,#52334,#52342,#52350,#52358, + #52366)); +#52324 = ORIENTED_EDGE('',*,*,#52304,.T.); +#52325 = ORIENTED_EDGE('',*,*,#52024,.T.); +#52326 = ORIENTED_EDGE('',*,*,#52327,.T.); +#52327 = EDGE_CURVE('',#52017,#52328,#52330,.T.); +#52328 = VERTEX_POINT('',#52329); +#52329 = CARTESIAN_POINT('',(-1.735,2.68345,1.035)); +#52330 = LINE('',#52331,#52332); +#52331 = CARTESIAN_POINT('',(-2.25,2.68345,1.035)); +#52332 = VECTOR('',#52333,1.); +#52333 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52334 = ORIENTED_EDGE('',*,*,#52335,.F.); +#52335 = EDGE_CURVE('',#52336,#52328,#52338,.T.); +#52336 = VERTEX_POINT('',#52337); +#52337 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#52338 = LINE('',#52339,#52340); +#52339 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#52340 = VECTOR('',#52341,1.); +#52341 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52342 = ORIENTED_EDGE('',*,*,#52343,.F.); +#52343 = EDGE_CURVE('',#52344,#52336,#52346,.T.); +#52344 = VERTEX_POINT('',#52345); +#52345 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#52346 = LINE('',#52347,#52348); +#52347 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#52348 = VECTOR('',#52349,1.); +#52349 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52350 = ORIENTED_EDGE('',*,*,#52351,.F.); +#52351 = EDGE_CURVE('',#52352,#52344,#52354,.T.); +#52352 = VERTEX_POINT('',#52353); +#52353 = CARTESIAN_POINT('',(1.735,1.15005,1.035)); +#52354 = LINE('',#52355,#52356); +#52355 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#52356 = VECTOR('',#52357,1.); +#52357 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52358 = ORIENTED_EDGE('',*,*,#52359,.F.); +#52359 = EDGE_CURVE('',#52360,#52352,#52362,.T.); +#52360 = VERTEX_POINT('',#52361); +#52361 = CARTESIAN_POINT('',(1.75,1.15005,1.035)); +#52362 = LINE('',#52363,#52364); +#52363 = CARTESIAN_POINT('',(2.25,1.15005,1.035)); +#52364 = VECTOR('',#52365,1.); +#52365 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52366 = ORIENTED_EDGE('',*,*,#52367,.T.); +#52367 = EDGE_CURVE('',#52360,#52305,#52368,.T.); +#52368 = LINE('',#52369,#52370); +#52369 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#52370 = VECTOR('',#52371,1.); +#52371 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52372 = PLANE('',#52373); +#52373 = AXIS2_PLACEMENT_3D('',#52374,#52375,#52376); +#52374 = CARTESIAN_POINT('',(-1.7425,-3.732941412364E-16,1.035)); +#52375 = DIRECTION('',(-2.496972947931E-25,-3.410490578954E-32,1.)); +#52376 = DIRECTION('',(1.025679957475E-16,-1.,-3.410490576393E-32)); +#52377 = ADVANCED_FACE('',(#52378),#52464,.T.); +#52378 = FACE_BOUND('',#52379,.T.); +#52379 = EDGE_LOOP('',(#52380,#52381,#52382,#52391,#52399,#52408,#52416, + #52424,#52432,#52441,#52449,#52458)); +#52380 = ORIENTED_EDGE('',*,*,#52016,.T.); +#52381 = ORIENTED_EDGE('',*,*,#52047,.T.); +#52382 = ORIENTED_EDGE('',*,*,#52383,.T.); +#52383 = EDGE_CURVE('',#52048,#52384,#52386,.T.); +#52384 = VERTEX_POINT('',#52385); +#52385 = CARTESIAN_POINT('',(-2.446961550602,2.68345,0.599729635533)); +#52386 = CIRCLE('',#52387,0.2); +#52387 = AXIS2_PLACEMENT_3D('',#52388,#52389,#52390); +#52388 = CARTESIAN_POINT('',(-2.25,2.68345,0.565)); +#52389 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52390 = DIRECTION('',(0.,0.,1.)); +#52391 = ORIENTED_EDGE('',*,*,#52392,.T.); +#52392 = EDGE_CURVE('',#52384,#52393,#52395,.T.); +#52393 = VERTEX_POINT('',#52394); +#52394 = CARTESIAN_POINT('',(-2.473891419252,2.68345,0.388385356497)); +#52395 = LINE('',#52396,#52397); +#52396 = CARTESIAN_POINT('',(-2.446961550602,2.68345,0.599729635533)); +#52397 = VECTOR('',#52398,1.); +#52398 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#52399 = ORIENTED_EDGE('',*,*,#52400,.T.); +#52400 = EDGE_CURVE('',#52393,#52401,#52403,.T.); +#52401 = VERTEX_POINT('',#52402); +#52402 = CARTESIAN_POINT('',(-2.936751063167,2.68345,-1.665334536938E-16 + )); +#52403 = CIRCLE('',#52404,0.47); +#52404 = AXIS2_PLACEMENT_3D('',#52405,#52406,#52407); +#52405 = CARTESIAN_POINT('',(-2.936751063167,2.68345,0.47)); +#52406 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#52407 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52408 = ORIENTED_EDGE('',*,*,#52409,.T.); +#52409 = EDGE_CURVE('',#52401,#52410,#52412,.T.); +#52410 = VERTEX_POINT('',#52411); +#52411 = CARTESIAN_POINT('',(-3.5,2.68345,-1.665334536938E-16)); +#52412 = LINE('',#52413,#52414); +#52413 = CARTESIAN_POINT('',(-2.936751063167,2.68345,-1.665334536938E-16 + )); +#52414 = VECTOR('',#52415,1.); +#52415 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52416 = ORIENTED_EDGE('',*,*,#52417,.T.); +#52417 = EDGE_CURVE('',#52410,#52418,#52420,.T.); +#52418 = VERTEX_POINT('',#52419); +#52419 = CARTESIAN_POINT('',(-3.5,2.68345,0.27)); +#52420 = LINE('',#52421,#52422); +#52421 = CARTESIAN_POINT('',(-3.5,2.68345,-1.665334536938E-16)); +#52422 = VECTOR('',#52423,1.); +#52423 = DIRECTION('',(0.,0.,1.)); +#52424 = ORIENTED_EDGE('',*,*,#52425,.T.); +#52425 = EDGE_CURVE('',#52418,#52426,#52428,.T.); +#52426 = VERTEX_POINT('',#52427); +#52427 = CARTESIAN_POINT('',(-2.936751063167,2.68345,0.27)); +#52428 = LINE('',#52429,#52430); +#52429 = CARTESIAN_POINT('',(-3.5,2.68345,0.27)); +#52430 = VECTOR('',#52431,1.); +#52431 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52432 = ORIENTED_EDGE('',*,*,#52433,.T.); +#52433 = EDGE_CURVE('',#52426,#52434,#52436,.T.); +#52434 = VERTEX_POINT('',#52435); +#52435 = CARTESIAN_POINT('',(-2.739789512565,2.68345,0.435270364467)); +#52436 = CIRCLE('',#52437,0.2); +#52437 = AXIS2_PLACEMENT_3D('',#52438,#52439,#52440); +#52438 = CARTESIAN_POINT('',(-2.936751063167,2.68345,0.47)); +#52439 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52440 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#52441 = ORIENTED_EDGE('',*,*,#52442,.T.); +#52442 = EDGE_CURVE('',#52434,#52443,#52445,.T.); +#52443 = VERTEX_POINT('',#52444); +#52444 = CARTESIAN_POINT('',(-2.712859643916,2.68345,0.646614643503)); +#52445 = LINE('',#52446,#52447); +#52446 = CARTESIAN_POINT('',(-2.739789512565,2.68345,0.435270364467)); +#52447 = VECTOR('',#52448,1.); +#52448 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#52449 = ORIENTED_EDGE('',*,*,#52450,.T.); +#52450 = EDGE_CURVE('',#52443,#52451,#52453,.T.); +#52451 = VERTEX_POINT('',#52452); +#52452 = CARTESIAN_POINT('',(-2.25,2.68345,1.035)); +#52453 = CIRCLE('',#52454,0.47); +#52454 = AXIS2_PLACEMENT_3D('',#52455,#52456,#52457); +#52455 = CARTESIAN_POINT('',(-2.25,2.68345,0.565)); +#52456 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#52457 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#52458 = ORIENTED_EDGE('',*,*,#52459,.T.); +#52459 = EDGE_CURVE('',#52451,#52017,#52460,.T.); +#52460 = LINE('',#52461,#52462); +#52461 = CARTESIAN_POINT('',(-2.25,2.68345,1.035)); +#52462 = VECTOR('',#52463,1.); +#52463 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52464 = PLANE('',#52465); +#52465 = AXIS2_PLACEMENT_3D('',#52466,#52467,#52468); +#52466 = CARTESIAN_POINT('',(-2.606989201797,2.68345,0.512419776725)); +#52467 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52468 = DIRECTION('',(0.,-0.,1.)); +#52469 = ADVANCED_FACE('',(#52470),#52556,.F.); +#52470 = FACE_BOUND('',#52471,.F.); +#52471 = EDGE_LOOP('',(#52472,#52473,#52474,#52483,#52491,#52500,#52508, + #52516,#52524,#52533,#52541,#52550)); +#52472 = ORIENTED_EDGE('',*,*,#52069,.T.); +#52473 = ORIENTED_EDGE('',*,*,#52038,.T.); +#52474 = ORIENTED_EDGE('',*,*,#52475,.T.); +#52475 = EDGE_CURVE('',#52039,#52476,#52478,.T.); +#52476 = VERTEX_POINT('',#52477); +#52477 = CARTESIAN_POINT('',(-2.446961550602,1.91675,0.599729635533)); +#52478 = CIRCLE('',#52479,0.2); +#52479 = AXIS2_PLACEMENT_3D('',#52480,#52481,#52482); +#52480 = CARTESIAN_POINT('',(-2.25,1.91675,0.565)); +#52481 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52482 = DIRECTION('',(0.,0.,1.)); +#52483 = ORIENTED_EDGE('',*,*,#52484,.T.); +#52484 = EDGE_CURVE('',#52476,#52485,#52487,.T.); +#52485 = VERTEX_POINT('',#52486); +#52486 = CARTESIAN_POINT('',(-2.473891419252,1.91675,0.388385356497)); +#52487 = LINE('',#52488,#52489); +#52488 = CARTESIAN_POINT('',(-2.446961550602,1.91675,0.599729635533)); +#52489 = VECTOR('',#52490,1.); +#52490 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#52491 = ORIENTED_EDGE('',*,*,#52492,.T.); +#52492 = EDGE_CURVE('',#52485,#52493,#52495,.T.); +#52493 = VERTEX_POINT('',#52494); +#52494 = CARTESIAN_POINT('',(-2.936751063167,1.91675,-1.665334536938E-16 + )); +#52495 = CIRCLE('',#52496,0.47); +#52496 = AXIS2_PLACEMENT_3D('',#52497,#52498,#52499); +#52497 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.47)); +#52498 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#52499 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52500 = ORIENTED_EDGE('',*,*,#52501,.T.); +#52501 = EDGE_CURVE('',#52493,#52502,#52504,.T.); +#52502 = VERTEX_POINT('',#52503); +#52503 = CARTESIAN_POINT('',(-3.5,1.91675,-1.665334536938E-16)); +#52504 = LINE('',#52505,#52506); +#52505 = CARTESIAN_POINT('',(-2.936751063167,1.91675,-1.665334536938E-16 + )); +#52506 = VECTOR('',#52507,1.); +#52507 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52508 = ORIENTED_EDGE('',*,*,#52509,.T.); +#52509 = EDGE_CURVE('',#52502,#52510,#52512,.T.); +#52510 = VERTEX_POINT('',#52511); +#52511 = CARTESIAN_POINT('',(-3.5,1.91675,0.27)); +#52512 = LINE('',#52513,#52514); +#52513 = CARTESIAN_POINT('',(-3.5,1.91675,-1.665334536938E-16)); +#52514 = VECTOR('',#52515,1.); +#52515 = DIRECTION('',(0.,0.,1.)); +#52516 = ORIENTED_EDGE('',*,*,#52517,.T.); +#52517 = EDGE_CURVE('',#52510,#52518,#52520,.T.); +#52518 = VERTEX_POINT('',#52519); +#52519 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.27)); +#52520 = LINE('',#52521,#52522); +#52521 = CARTESIAN_POINT('',(-3.5,1.91675,0.27)); +#52522 = VECTOR('',#52523,1.); +#52523 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52524 = ORIENTED_EDGE('',*,*,#52525,.T.); +#52525 = EDGE_CURVE('',#52518,#52526,#52528,.T.); +#52526 = VERTEX_POINT('',#52527); +#52527 = CARTESIAN_POINT('',(-2.739789512565,1.91675,0.435270364467)); +#52528 = CIRCLE('',#52529,0.2); +#52529 = AXIS2_PLACEMENT_3D('',#52530,#52531,#52532); +#52530 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.47)); +#52531 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52532 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#52533 = ORIENTED_EDGE('',*,*,#52534,.T.); +#52534 = EDGE_CURVE('',#52526,#52535,#52537,.T.); +#52535 = VERTEX_POINT('',#52536); +#52536 = CARTESIAN_POINT('',(-2.712859643916,1.91675,0.646614643503)); +#52537 = LINE('',#52538,#52539); +#52538 = CARTESIAN_POINT('',(-2.739789512565,1.91675,0.435270364467)); +#52539 = VECTOR('',#52540,1.); +#52540 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#52541 = ORIENTED_EDGE('',*,*,#52542,.T.); +#52542 = EDGE_CURVE('',#52535,#52543,#52545,.T.); +#52543 = VERTEX_POINT('',#52544); +#52544 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#52545 = CIRCLE('',#52546,0.47); +#52546 = AXIS2_PLACEMENT_3D('',#52547,#52548,#52549); +#52547 = CARTESIAN_POINT('',(-2.25,1.91675,0.565)); +#52548 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#52549 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#52550 = ORIENTED_EDGE('',*,*,#52551,.T.); +#52551 = EDGE_CURVE('',#52543,#52070,#52552,.T.); +#52552 = LINE('',#52553,#52554); +#52553 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#52554 = VECTOR('',#52555,1.); +#52555 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52556 = PLANE('',#52557); +#52557 = AXIS2_PLACEMENT_3D('',#52558,#52559,#52560); +#52558 = CARTESIAN_POINT('',(-2.606989201797,1.91675,0.512419776725)); +#52559 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52560 = DIRECTION('',(0.,-0.,1.)); +#52561 = ADVANCED_FACE('',(#52562),#52573,.F.); +#52562 = FACE_BOUND('',#52563,.F.); +#52563 = EDGE_LOOP('',(#52564,#52565,#52566,#52572)); +#52564 = ORIENTED_EDGE('',*,*,#52055,.T.); +#52565 = ORIENTED_EDGE('',*,*,#52383,.T.); +#52566 = ORIENTED_EDGE('',*,*,#52567,.F.); +#52567 = EDGE_CURVE('',#52476,#52384,#52568,.T.); +#52568 = LINE('',#52569,#52570); +#52569 = CARTESIAN_POINT('',(-2.446961550602,1.91675,0.599729635533)); +#52570 = VECTOR('',#52571,1.); +#52571 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52572 = ORIENTED_EDGE('',*,*,#52475,.F.); +#52573 = CYLINDRICAL_SURFACE('',#52574,0.2); +#52574 = AXIS2_PLACEMENT_3D('',#52575,#52576,#52577); +#52575 = CARTESIAN_POINT('',(-2.25,1.91675,0.565)); +#52576 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52577 = DIRECTION('',(0.,0.,1.)); +#52578 = ADVANCED_FACE('',(#52579),#52604,.T.); +#52579 = FACE_BOUND('',#52580,.T.); +#52580 = EDGE_LOOP('',(#52581,#52589,#52590,#52598)); +#52581 = ORIENTED_EDGE('',*,*,#52582,.F.); +#52582 = EDGE_CURVE('',#52070,#52583,#52585,.T.); +#52583 = VERTEX_POINT('',#52584); +#52584 = CARTESIAN_POINT('',(-1.735,1.91675,1.035)); +#52585 = LINE('',#52586,#52587); +#52586 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#52587 = VECTOR('',#52588,1.); +#52588 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52589 = ORIENTED_EDGE('',*,*,#52086,.T.); +#52590 = ORIENTED_EDGE('',*,*,#52591,.T.); +#52591 = EDGE_CURVE('',#52079,#52592,#52594,.T.); +#52592 = VERTEX_POINT('',#52593); +#52593 = CARTESIAN_POINT('',(-1.735,0.38335,1.035)); +#52594 = LINE('',#52595,#52596); +#52595 = CARTESIAN_POINT('',(-2.25,0.38335,1.035)); +#52596 = VECTOR('',#52597,1.); +#52597 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52598 = ORIENTED_EDGE('',*,*,#52599,.F.); +#52599 = EDGE_CURVE('',#52583,#52592,#52600,.T.); +#52600 = LINE('',#52601,#52602); +#52601 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#52602 = VECTOR('',#52603,1.); +#52603 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52604 = PLANE('',#52605); +#52605 = AXIS2_PLACEMENT_3D('',#52606,#52607,#52608); +#52606 = CARTESIAN_POINT('',(-1.7425,-3.732941412364E-16,1.035)); +#52607 = DIRECTION('',(-2.496972947931E-25,-3.410490578954E-32,1.)); +#52608 = DIRECTION('',(1.025679957475E-16,-1.,-3.410490576393E-32)); +#52609 = ADVANCED_FACE('',(#52610),#52696,.T.); +#52610 = FACE_BOUND('',#52611,.T.); +#52611 = EDGE_LOOP('',(#52612,#52613,#52614,#52623,#52631,#52640,#52648, + #52656,#52664,#52673,#52681,#52690)); +#52612 = ORIENTED_EDGE('',*,*,#52078,.T.); +#52613 = ORIENTED_EDGE('',*,*,#52109,.T.); +#52614 = ORIENTED_EDGE('',*,*,#52615,.T.); +#52615 = EDGE_CURVE('',#52110,#52616,#52618,.T.); +#52616 = VERTEX_POINT('',#52617); +#52617 = CARTESIAN_POINT('',(-2.446961550602,0.38335,0.599729635533)); +#52618 = CIRCLE('',#52619,0.2); +#52619 = AXIS2_PLACEMENT_3D('',#52620,#52621,#52622); +#52620 = CARTESIAN_POINT('',(-2.25,0.38335,0.565)); +#52621 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52622 = DIRECTION('',(0.,0.,1.)); +#52623 = ORIENTED_EDGE('',*,*,#52624,.T.); +#52624 = EDGE_CURVE('',#52616,#52625,#52627,.T.); +#52625 = VERTEX_POINT('',#52626); +#52626 = CARTESIAN_POINT('',(-2.473891419252,0.38335,0.388385356497)); +#52627 = LINE('',#52628,#52629); +#52628 = CARTESIAN_POINT('',(-2.446961550602,0.38335,0.599729635533)); +#52629 = VECTOR('',#52630,1.); +#52630 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#52631 = ORIENTED_EDGE('',*,*,#52632,.T.); +#52632 = EDGE_CURVE('',#52625,#52633,#52635,.T.); +#52633 = VERTEX_POINT('',#52634); +#52634 = CARTESIAN_POINT('',(-2.936751063167,0.38335,-1.665334536938E-16 + )); +#52635 = CIRCLE('',#52636,0.47); +#52636 = AXIS2_PLACEMENT_3D('',#52637,#52638,#52639); +#52637 = CARTESIAN_POINT('',(-2.936751063167,0.38335,0.47)); +#52638 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#52639 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52640 = ORIENTED_EDGE('',*,*,#52641,.T.); +#52641 = EDGE_CURVE('',#52633,#52642,#52644,.T.); +#52642 = VERTEX_POINT('',#52643); +#52643 = CARTESIAN_POINT('',(-3.5,0.38335,-1.665334536938E-16)); +#52644 = LINE('',#52645,#52646); +#52645 = CARTESIAN_POINT('',(-2.936751063167,0.38335,-1.665334536938E-16 + )); +#52646 = VECTOR('',#52647,1.); +#52647 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52648 = ORIENTED_EDGE('',*,*,#52649,.T.); +#52649 = EDGE_CURVE('',#52642,#52650,#52652,.T.); +#52650 = VERTEX_POINT('',#52651); +#52651 = CARTESIAN_POINT('',(-3.5,0.38335,0.27)); +#52652 = LINE('',#52653,#52654); +#52653 = CARTESIAN_POINT('',(-3.5,0.38335,-1.665334536938E-16)); +#52654 = VECTOR('',#52655,1.); +#52655 = DIRECTION('',(0.,0.,1.)); +#52656 = ORIENTED_EDGE('',*,*,#52657,.T.); +#52657 = EDGE_CURVE('',#52650,#52658,#52660,.T.); +#52658 = VERTEX_POINT('',#52659); +#52659 = CARTESIAN_POINT('',(-2.936751063167,0.38335,0.27)); +#52660 = LINE('',#52661,#52662); +#52661 = CARTESIAN_POINT('',(-3.5,0.38335,0.27)); +#52662 = VECTOR('',#52663,1.); +#52663 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52664 = ORIENTED_EDGE('',*,*,#52665,.T.); +#52665 = EDGE_CURVE('',#52658,#52666,#52668,.T.); +#52666 = VERTEX_POINT('',#52667); +#52667 = CARTESIAN_POINT('',(-2.739789512565,0.38335,0.435270364467)); +#52668 = CIRCLE('',#52669,0.2); +#52669 = AXIS2_PLACEMENT_3D('',#52670,#52671,#52672); +#52670 = CARTESIAN_POINT('',(-2.936751063167,0.38335,0.47)); +#52671 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52672 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#52673 = ORIENTED_EDGE('',*,*,#52674,.T.); +#52674 = EDGE_CURVE('',#52666,#52675,#52677,.T.); +#52675 = VERTEX_POINT('',#52676); +#52676 = CARTESIAN_POINT('',(-2.712859643916,0.38335,0.646614643503)); +#52677 = LINE('',#52678,#52679); +#52678 = CARTESIAN_POINT('',(-2.739789512565,0.38335,0.435270364467)); +#52679 = VECTOR('',#52680,1.); +#52680 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#52681 = ORIENTED_EDGE('',*,*,#52682,.T.); +#52682 = EDGE_CURVE('',#52675,#52683,#52685,.T.); +#52683 = VERTEX_POINT('',#52684); +#52684 = CARTESIAN_POINT('',(-2.25,0.38335,1.035)); +#52685 = CIRCLE('',#52686,0.47); +#52686 = AXIS2_PLACEMENT_3D('',#52687,#52688,#52689); +#52687 = CARTESIAN_POINT('',(-2.25,0.38335,0.565)); +#52688 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#52689 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#52690 = ORIENTED_EDGE('',*,*,#52691,.T.); +#52691 = EDGE_CURVE('',#52683,#52079,#52692,.T.); +#52692 = LINE('',#52693,#52694); +#52693 = CARTESIAN_POINT('',(-2.25,0.38335,1.035)); +#52694 = VECTOR('',#52695,1.); +#52695 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52696 = PLANE('',#52697); +#52697 = AXIS2_PLACEMENT_3D('',#52698,#52699,#52700); +#52698 = CARTESIAN_POINT('',(-2.606989201797,0.38335,0.512419776725)); +#52699 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52700 = DIRECTION('',(0.,-0.,1.)); +#52701 = ADVANCED_FACE('',(#52702),#52788,.F.); +#52702 = FACE_BOUND('',#52703,.F.); +#52703 = EDGE_LOOP('',(#52704,#52705,#52706,#52715,#52723,#52732,#52740, + #52748,#52756,#52765,#52773,#52782)); +#52704 = ORIENTED_EDGE('',*,*,#52131,.T.); +#52705 = ORIENTED_EDGE('',*,*,#52100,.T.); +#52706 = ORIENTED_EDGE('',*,*,#52707,.T.); +#52707 = EDGE_CURVE('',#52101,#52708,#52710,.T.); +#52708 = VERTEX_POINT('',#52709); +#52709 = CARTESIAN_POINT('',(-2.446961550602,-0.38335,0.599729635533)); +#52710 = CIRCLE('',#52711,0.2); +#52711 = AXIS2_PLACEMENT_3D('',#52712,#52713,#52714); +#52712 = CARTESIAN_POINT('',(-2.25,-0.38335,0.565)); +#52713 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52714 = DIRECTION('',(0.,0.,1.)); +#52715 = ORIENTED_EDGE('',*,*,#52716,.T.); +#52716 = EDGE_CURVE('',#52708,#52717,#52719,.T.); +#52717 = VERTEX_POINT('',#52718); +#52718 = CARTESIAN_POINT('',(-2.473891419252,-0.38335,0.388385356497)); +#52719 = LINE('',#52720,#52721); +#52720 = CARTESIAN_POINT('',(-2.446961550602,-0.38335,0.599729635533)); +#52721 = VECTOR('',#52722,1.); +#52722 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#52723 = ORIENTED_EDGE('',*,*,#52724,.T.); +#52724 = EDGE_CURVE('',#52717,#52725,#52727,.T.); +#52725 = VERTEX_POINT('',#52726); +#52726 = CARTESIAN_POINT('',(-2.936751063167,-0.38335, + -1.665334536938E-16)); +#52727 = CIRCLE('',#52728,0.47); +#52728 = AXIS2_PLACEMENT_3D('',#52729,#52730,#52731); +#52729 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.47)); +#52730 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#52731 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52732 = ORIENTED_EDGE('',*,*,#52733,.T.); +#52733 = EDGE_CURVE('',#52725,#52734,#52736,.T.); +#52734 = VERTEX_POINT('',#52735); +#52735 = CARTESIAN_POINT('',(-3.5,-0.38335,-1.665334536938E-16)); +#52736 = LINE('',#52737,#52738); +#52737 = CARTESIAN_POINT('',(-2.936751063167,-0.38335, + -1.665334536938E-16)); +#52738 = VECTOR('',#52739,1.); +#52739 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52740 = ORIENTED_EDGE('',*,*,#52741,.T.); +#52741 = EDGE_CURVE('',#52734,#52742,#52744,.T.); +#52742 = VERTEX_POINT('',#52743); +#52743 = CARTESIAN_POINT('',(-3.5,-0.38335,0.27)); +#52744 = LINE('',#52745,#52746); +#52745 = CARTESIAN_POINT('',(-3.5,-0.38335,-1.665334536938E-16)); +#52746 = VECTOR('',#52747,1.); +#52747 = DIRECTION('',(0.,0.,1.)); +#52748 = ORIENTED_EDGE('',*,*,#52749,.T.); +#52749 = EDGE_CURVE('',#52742,#52750,#52752,.T.); +#52750 = VERTEX_POINT('',#52751); +#52751 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.27)); +#52752 = LINE('',#52753,#52754); +#52753 = CARTESIAN_POINT('',(-3.5,-0.38335,0.27)); +#52754 = VECTOR('',#52755,1.); +#52755 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52756 = ORIENTED_EDGE('',*,*,#52757,.T.); +#52757 = EDGE_CURVE('',#52750,#52758,#52760,.T.); +#52758 = VERTEX_POINT('',#52759); +#52759 = CARTESIAN_POINT('',(-2.739789512565,-0.38335,0.435270364467)); +#52760 = CIRCLE('',#52761,0.2); +#52761 = AXIS2_PLACEMENT_3D('',#52762,#52763,#52764); +#52762 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.47)); +#52763 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52764 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#52765 = ORIENTED_EDGE('',*,*,#52766,.T.); +#52766 = EDGE_CURVE('',#52758,#52767,#52769,.T.); +#52767 = VERTEX_POINT('',#52768); +#52768 = CARTESIAN_POINT('',(-2.712859643916,-0.38335,0.646614643503)); +#52769 = LINE('',#52770,#52771); +#52770 = CARTESIAN_POINT('',(-2.739789512565,-0.38335,0.435270364467)); +#52771 = VECTOR('',#52772,1.); +#52772 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#52773 = ORIENTED_EDGE('',*,*,#52774,.T.); +#52774 = EDGE_CURVE('',#52767,#52775,#52777,.T.); +#52775 = VERTEX_POINT('',#52776); +#52776 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#52777 = CIRCLE('',#52778,0.47); +#52778 = AXIS2_PLACEMENT_3D('',#52779,#52780,#52781); +#52779 = CARTESIAN_POINT('',(-2.25,-0.38335,0.565)); +#52780 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#52781 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#52782 = ORIENTED_EDGE('',*,*,#52783,.T.); +#52783 = EDGE_CURVE('',#52775,#52132,#52784,.T.); +#52784 = LINE('',#52785,#52786); +#52785 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#52786 = VECTOR('',#52787,1.); +#52787 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52788 = PLANE('',#52789); +#52789 = AXIS2_PLACEMENT_3D('',#52790,#52791,#52792); +#52790 = CARTESIAN_POINT('',(-2.606989201797,-0.38335,0.512419776725)); +#52791 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52792 = DIRECTION('',(0.,-0.,1.)); +#52793 = ADVANCED_FACE('',(#52794),#52805,.F.); +#52794 = FACE_BOUND('',#52795,.F.); +#52795 = EDGE_LOOP('',(#52796,#52797,#52798,#52804)); +#52796 = ORIENTED_EDGE('',*,*,#52117,.T.); +#52797 = ORIENTED_EDGE('',*,*,#52615,.T.); +#52798 = ORIENTED_EDGE('',*,*,#52799,.F.); +#52799 = EDGE_CURVE('',#52708,#52616,#52800,.T.); +#52800 = LINE('',#52801,#52802); +#52801 = CARTESIAN_POINT('',(-2.446961550602,-0.38335,0.599729635533)); +#52802 = VECTOR('',#52803,1.); +#52803 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52804 = ORIENTED_EDGE('',*,*,#52707,.F.); +#52805 = CYLINDRICAL_SURFACE('',#52806,0.2); +#52806 = AXIS2_PLACEMENT_3D('',#52807,#52808,#52809); +#52807 = CARTESIAN_POINT('',(-2.25,-0.38335,0.565)); +#52808 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52809 = DIRECTION('',(0.,0.,1.)); +#52810 = ADVANCED_FACE('',(#52811),#52836,.T.); +#52811 = FACE_BOUND('',#52812,.T.); +#52812 = EDGE_LOOP('',(#52813,#52821,#52822,#52830)); +#52813 = ORIENTED_EDGE('',*,*,#52814,.F.); +#52814 = EDGE_CURVE('',#52132,#52815,#52817,.T.); +#52815 = VERTEX_POINT('',#52816); +#52816 = CARTESIAN_POINT('',(-1.735,-0.38335,1.035)); +#52817 = LINE('',#52818,#52819); +#52818 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#52819 = VECTOR('',#52820,1.); +#52820 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52821 = ORIENTED_EDGE('',*,*,#52148,.T.); +#52822 = ORIENTED_EDGE('',*,*,#52823,.T.); +#52823 = EDGE_CURVE('',#52141,#52824,#52826,.T.); +#52824 = VERTEX_POINT('',#52825); +#52825 = CARTESIAN_POINT('',(-1.735,-1.91675,1.035)); +#52826 = LINE('',#52827,#52828); +#52827 = CARTESIAN_POINT('',(-2.25,-1.91675,1.035)); +#52828 = VECTOR('',#52829,1.); +#52829 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52830 = ORIENTED_EDGE('',*,*,#52831,.F.); +#52831 = EDGE_CURVE('',#52815,#52824,#52832,.T.); +#52832 = LINE('',#52833,#52834); +#52833 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#52834 = VECTOR('',#52835,1.); +#52835 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52836 = PLANE('',#52837); +#52837 = AXIS2_PLACEMENT_3D('',#52838,#52839,#52840); +#52838 = CARTESIAN_POINT('',(-1.7425,-3.732941412364E-16,1.035)); +#52839 = DIRECTION('',(-2.496972947931E-25,-3.410490578954E-32,1.)); +#52840 = DIRECTION('',(1.025679957475E-16,-1.,-3.410490576393E-32)); +#52841 = ADVANCED_FACE('',(#52842),#52928,.T.); +#52842 = FACE_BOUND('',#52843,.T.); +#52843 = EDGE_LOOP('',(#52844,#52845,#52846,#52855,#52863,#52872,#52880, + #52888,#52896,#52905,#52913,#52922)); +#52844 = ORIENTED_EDGE('',*,*,#52140,.T.); +#52845 = ORIENTED_EDGE('',*,*,#52171,.T.); +#52846 = ORIENTED_EDGE('',*,*,#52847,.T.); +#52847 = EDGE_CURVE('',#52172,#52848,#52850,.T.); +#52848 = VERTEX_POINT('',#52849); +#52849 = CARTESIAN_POINT('',(-2.446961550602,-1.91675,0.599729635533)); +#52850 = CIRCLE('',#52851,0.2); +#52851 = AXIS2_PLACEMENT_3D('',#52852,#52853,#52854); +#52852 = CARTESIAN_POINT('',(-2.25,-1.91675,0.565)); +#52853 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52854 = DIRECTION('',(0.,0.,1.)); +#52855 = ORIENTED_EDGE('',*,*,#52856,.T.); +#52856 = EDGE_CURVE('',#52848,#52857,#52859,.T.); +#52857 = VERTEX_POINT('',#52858); +#52858 = CARTESIAN_POINT('',(-2.473891419252,-1.91675,0.388385356497)); +#52859 = LINE('',#52860,#52861); +#52860 = CARTESIAN_POINT('',(-2.446961550602,-1.91675,0.599729635533)); +#52861 = VECTOR('',#52862,1.); +#52862 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#52863 = ORIENTED_EDGE('',*,*,#52864,.T.); +#52864 = EDGE_CURVE('',#52857,#52865,#52867,.T.); +#52865 = VERTEX_POINT('',#52866); +#52866 = CARTESIAN_POINT('',(-2.936751063167,-1.91675, + -1.665334536938E-16)); +#52867 = CIRCLE('',#52868,0.47); +#52868 = AXIS2_PLACEMENT_3D('',#52869,#52870,#52871); +#52869 = CARTESIAN_POINT('',(-2.936751063167,-1.91675,0.47)); +#52870 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#52871 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52872 = ORIENTED_EDGE('',*,*,#52873,.T.); +#52873 = EDGE_CURVE('',#52865,#52874,#52876,.T.); +#52874 = VERTEX_POINT('',#52875); +#52875 = CARTESIAN_POINT('',(-3.5,-1.91675,-1.665334536938E-16)); +#52876 = LINE('',#52877,#52878); +#52877 = CARTESIAN_POINT('',(-2.936751063167,-1.91675, + -1.665334536938E-16)); +#52878 = VECTOR('',#52879,1.); +#52879 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52880 = ORIENTED_EDGE('',*,*,#52881,.T.); +#52881 = EDGE_CURVE('',#52874,#52882,#52884,.T.); +#52882 = VERTEX_POINT('',#52883); +#52883 = CARTESIAN_POINT('',(-3.5,-1.91675,0.27)); +#52884 = LINE('',#52885,#52886); +#52885 = CARTESIAN_POINT('',(-3.5,-1.91675,-1.665334536938E-16)); +#52886 = VECTOR('',#52887,1.); +#52887 = DIRECTION('',(0.,0.,1.)); +#52888 = ORIENTED_EDGE('',*,*,#52889,.T.); +#52889 = EDGE_CURVE('',#52882,#52890,#52892,.T.); +#52890 = VERTEX_POINT('',#52891); +#52891 = CARTESIAN_POINT('',(-2.936751063167,-1.91675,0.27)); +#52892 = LINE('',#52893,#52894); +#52893 = CARTESIAN_POINT('',(-3.5,-1.91675,0.27)); +#52894 = VECTOR('',#52895,1.); +#52895 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52896 = ORIENTED_EDGE('',*,*,#52897,.T.); +#52897 = EDGE_CURVE('',#52890,#52898,#52900,.T.); +#52898 = VERTEX_POINT('',#52899); +#52899 = CARTESIAN_POINT('',(-2.739789512565,-1.91675,0.435270364467)); +#52900 = CIRCLE('',#52901,0.2); +#52901 = AXIS2_PLACEMENT_3D('',#52902,#52903,#52904); +#52902 = CARTESIAN_POINT('',(-2.936751063167,-1.91675,0.47)); +#52903 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52904 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#52905 = ORIENTED_EDGE('',*,*,#52906,.T.); +#52906 = EDGE_CURVE('',#52898,#52907,#52909,.T.); +#52907 = VERTEX_POINT('',#52908); +#52908 = CARTESIAN_POINT('',(-2.712859643916,-1.91675,0.646614643503)); +#52909 = LINE('',#52910,#52911); +#52910 = CARTESIAN_POINT('',(-2.739789512565,-1.91675,0.435270364467)); +#52911 = VECTOR('',#52912,1.); +#52912 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#52913 = ORIENTED_EDGE('',*,*,#52914,.T.); +#52914 = EDGE_CURVE('',#52907,#52915,#52917,.T.); +#52915 = VERTEX_POINT('',#52916); +#52916 = CARTESIAN_POINT('',(-2.25,-1.91675,1.035)); +#52917 = CIRCLE('',#52918,0.47); +#52918 = AXIS2_PLACEMENT_3D('',#52919,#52920,#52921); +#52919 = CARTESIAN_POINT('',(-2.25,-1.91675,0.565)); +#52920 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#52921 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#52922 = ORIENTED_EDGE('',*,*,#52923,.T.); +#52923 = EDGE_CURVE('',#52915,#52141,#52924,.T.); +#52924 = LINE('',#52925,#52926); +#52925 = CARTESIAN_POINT('',(-2.25,-1.91675,1.035)); +#52926 = VECTOR('',#52927,1.); +#52927 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52928 = PLANE('',#52929); +#52929 = AXIS2_PLACEMENT_3D('',#52930,#52931,#52932); +#52930 = CARTESIAN_POINT('',(-2.606989201797,-1.91675,0.512419776725)); +#52931 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52932 = DIRECTION('',(0.,-0.,1.)); +#52933 = ADVANCED_FACE('',(#52934),#53020,.F.); +#52934 = FACE_BOUND('',#52935,.F.); +#52935 = EDGE_LOOP('',(#52936,#52937,#52938,#52947,#52955,#52964,#52972, + #52980,#52988,#52997,#53005,#53014)); +#52936 = ORIENTED_EDGE('',*,*,#52193,.T.); +#52937 = ORIENTED_EDGE('',*,*,#52162,.T.); +#52938 = ORIENTED_EDGE('',*,*,#52939,.T.); +#52939 = EDGE_CURVE('',#52163,#52940,#52942,.T.); +#52940 = VERTEX_POINT('',#52941); +#52941 = CARTESIAN_POINT('',(-2.446961550602,-2.68345,0.599729635533)); +#52942 = CIRCLE('',#52943,0.2); +#52943 = AXIS2_PLACEMENT_3D('',#52944,#52945,#52946); +#52944 = CARTESIAN_POINT('',(-2.25,-2.68345,0.565)); +#52945 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52946 = DIRECTION('',(0.,0.,1.)); +#52947 = ORIENTED_EDGE('',*,*,#52948,.T.); +#52948 = EDGE_CURVE('',#52940,#52949,#52951,.T.); +#52949 = VERTEX_POINT('',#52950); +#52950 = CARTESIAN_POINT('',(-2.473891419252,-2.68345,0.388385356497)); +#52951 = LINE('',#52952,#52953); +#52952 = CARTESIAN_POINT('',(-2.446961550602,-2.68345,0.599729635533)); +#52953 = VECTOR('',#52954,1.); +#52954 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#52955 = ORIENTED_EDGE('',*,*,#52956,.T.); +#52956 = EDGE_CURVE('',#52949,#52957,#52959,.T.); +#52957 = VERTEX_POINT('',#52958); +#52958 = CARTESIAN_POINT('',(-2.936751063167,-2.68345, + -1.665334536938E-16)); +#52959 = CIRCLE('',#52960,0.47); +#52960 = AXIS2_PLACEMENT_3D('',#52961,#52962,#52963); +#52961 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.47)); +#52962 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#52963 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52964 = ORIENTED_EDGE('',*,*,#52965,.T.); +#52965 = EDGE_CURVE('',#52957,#52966,#52968,.T.); +#52966 = VERTEX_POINT('',#52967); +#52967 = CARTESIAN_POINT('',(-3.5,-2.68345,-1.665334536938E-16)); +#52968 = LINE('',#52969,#52970); +#52969 = CARTESIAN_POINT('',(-2.936751063167,-2.68345, + -1.665334536938E-16)); +#52970 = VECTOR('',#52971,1.); +#52971 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52972 = ORIENTED_EDGE('',*,*,#52973,.T.); +#52973 = EDGE_CURVE('',#52966,#52974,#52976,.T.); +#52974 = VERTEX_POINT('',#52975); +#52975 = CARTESIAN_POINT('',(-3.5,-2.68345,0.27)); +#52976 = LINE('',#52977,#52978); +#52977 = CARTESIAN_POINT('',(-3.5,-2.68345,-1.665334536938E-16)); +#52978 = VECTOR('',#52979,1.); +#52979 = DIRECTION('',(0.,0.,1.)); +#52980 = ORIENTED_EDGE('',*,*,#52981,.T.); +#52981 = EDGE_CURVE('',#52974,#52982,#52984,.T.); +#52982 = VERTEX_POINT('',#52983); +#52983 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.27)); +#52984 = LINE('',#52985,#52986); +#52985 = CARTESIAN_POINT('',(-3.5,-2.68345,0.27)); +#52986 = VECTOR('',#52987,1.); +#52987 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52988 = ORIENTED_EDGE('',*,*,#52989,.T.); +#52989 = EDGE_CURVE('',#52982,#52990,#52992,.T.); +#52990 = VERTEX_POINT('',#52991); +#52991 = CARTESIAN_POINT('',(-2.739789512565,-2.68345,0.435270364467)); +#52992 = CIRCLE('',#52993,0.2); +#52993 = AXIS2_PLACEMENT_3D('',#52994,#52995,#52996); +#52994 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.47)); +#52995 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52996 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#52997 = ORIENTED_EDGE('',*,*,#52998,.T.); +#52998 = EDGE_CURVE('',#52990,#52999,#53001,.T.); +#52999 = VERTEX_POINT('',#53000); +#53000 = CARTESIAN_POINT('',(-2.712859643916,-2.68345,0.646614643503)); +#53001 = LINE('',#53002,#53003); +#53002 = CARTESIAN_POINT('',(-2.739789512565,-2.68345,0.435270364467)); +#53003 = VECTOR('',#53004,1.); +#53004 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#53005 = ORIENTED_EDGE('',*,*,#53006,.T.); +#53006 = EDGE_CURVE('',#52999,#53007,#53009,.T.); +#53007 = VERTEX_POINT('',#53008); +#53008 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#53009 = CIRCLE('',#53010,0.47); +#53010 = AXIS2_PLACEMENT_3D('',#53011,#53012,#53013); +#53011 = CARTESIAN_POINT('',(-2.25,-2.68345,0.565)); +#53012 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#53013 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#53014 = ORIENTED_EDGE('',*,*,#53015,.T.); +#53015 = EDGE_CURVE('',#53007,#52194,#53016,.T.); +#53016 = LINE('',#53017,#53018); +#53017 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#53018 = VECTOR('',#53019,1.); +#53019 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53020 = PLANE('',#53021); +#53021 = AXIS2_PLACEMENT_3D('',#53022,#53023,#53024); +#53022 = CARTESIAN_POINT('',(-2.606989201797,-2.68345,0.512419776725)); +#53023 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53024 = DIRECTION('',(0.,-0.,1.)); +#53025 = ADVANCED_FACE('',(#53026),#53037,.F.); +#53026 = FACE_BOUND('',#53027,.F.); +#53027 = EDGE_LOOP('',(#53028,#53029,#53030,#53036)); +#53028 = ORIENTED_EDGE('',*,*,#52179,.T.); +#53029 = ORIENTED_EDGE('',*,*,#52847,.T.); +#53030 = ORIENTED_EDGE('',*,*,#53031,.F.); +#53031 = EDGE_CURVE('',#52940,#52848,#53032,.T.); +#53032 = LINE('',#53033,#53034); +#53033 = CARTESIAN_POINT('',(-2.446961550602,-2.68345,0.599729635533)); +#53034 = VECTOR('',#53035,1.); +#53035 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53036 = ORIENTED_EDGE('',*,*,#52939,.F.); +#53037 = CYLINDRICAL_SURFACE('',#53038,0.2); +#53038 = AXIS2_PLACEMENT_3D('',#53039,#53040,#53041); +#53039 = CARTESIAN_POINT('',(-2.25,-2.68345,0.565)); +#53040 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53041 = DIRECTION('',(0.,0.,1.)); +#53042 = ADVANCED_FACE('',(#53043),#53093,.T.); +#53043 = FACE_BOUND('',#53044,.T.); +#53044 = EDGE_LOOP('',(#53045,#53053,#53061,#53069,#53077,#53085,#53091, + #53092)); +#53045 = ORIENTED_EDGE('',*,*,#53046,.T.); +#53046 = EDGE_CURVE('',#52281,#53047,#53049,.T.); +#53047 = VERTEX_POINT('',#53048); +#53048 = CARTESIAN_POINT('',(1.75,-1.15005,1.035)); +#53049 = LINE('',#53050,#53051); +#53050 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#53051 = VECTOR('',#53052,1.); +#53052 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53053 = ORIENTED_EDGE('',*,*,#53054,.T.); +#53054 = EDGE_CURVE('',#53047,#53055,#53057,.T.); +#53055 = VERTEX_POINT('',#53056); +#53056 = CARTESIAN_POINT('',(1.735,-1.15005,1.035)); +#53057 = LINE('',#53058,#53059); +#53058 = CARTESIAN_POINT('',(2.25,-1.15005,1.035)); +#53059 = VECTOR('',#53060,1.); +#53060 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53061 = ORIENTED_EDGE('',*,*,#53062,.F.); +#53062 = EDGE_CURVE('',#53063,#53055,#53065,.T.); +#53063 = VERTEX_POINT('',#53064); +#53064 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#53065 = LINE('',#53066,#53067); +#53066 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#53067 = VECTOR('',#53068,1.); +#53068 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53069 = ORIENTED_EDGE('',*,*,#53070,.F.); +#53070 = EDGE_CURVE('',#53071,#53063,#53073,.T.); +#53071 = VERTEX_POINT('',#53072); +#53072 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#53073 = LINE('',#53074,#53075); +#53074 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#53075 = VECTOR('',#53076,1.); +#53076 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53077 = ORIENTED_EDGE('',*,*,#53078,.F.); +#53078 = EDGE_CURVE('',#53079,#53071,#53081,.T.); +#53079 = VERTEX_POINT('',#53080); +#53080 = CARTESIAN_POINT('',(-1.735,-2.68345,1.035)); +#53081 = LINE('',#53082,#53083); +#53082 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#53083 = VECTOR('',#53084,1.); +#53084 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53085 = ORIENTED_EDGE('',*,*,#53086,.F.); +#53086 = EDGE_CURVE('',#52194,#53079,#53087,.T.); +#53087 = LINE('',#53088,#53089); +#53088 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#53089 = VECTOR('',#53090,1.); +#53090 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53091 = ORIENTED_EDGE('',*,*,#52209,.T.); +#53092 = ORIENTED_EDGE('',*,*,#52287,.T.); +#53093 = PLANE('',#53094); +#53094 = AXIS2_PLACEMENT_3D('',#53095,#53096,#53097); +#53095 = CARTESIAN_POINT('',(-1.7425,-3.732941412364E-16,1.035)); +#53096 = DIRECTION('',(-2.496972947931E-25,-3.410490578954E-32,1.)); +#53097 = DIRECTION('',(1.025679957475E-16,-1.,-3.410490576393E-32)); +#53098 = ADVANCED_FACE('',(#53099),#53110,.T.); +#53099 = FACE_BOUND('',#53100,.T.); +#53100 = EDGE_LOOP('',(#53101,#53102,#53103,#53109)); +#53101 = ORIENTED_EDGE('',*,*,#52280,.F.); +#53102 = ORIENTED_EDGE('',*,*,#52264,.T.); +#53103 = ORIENTED_EDGE('',*,*,#53104,.F.); +#53104 = EDGE_CURVE('',#53047,#52257,#53105,.T.); +#53105 = LINE('',#53106,#53107); +#53106 = CARTESIAN_POINT('',(1.75,-1.15005,0.773709888363)); +#53107 = VECTOR('',#53108,1.); +#53108 = DIRECTION('',(0.,0.,-1.)); +#53109 = ORIENTED_EDGE('',*,*,#53046,.F.); +#53110 = PLANE('',#53111); +#53111 = AXIS2_PLACEMENT_3D('',#53112,#53113,#53114); +#53112 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#53113 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53114 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53115 = ADVANCED_FACE('',(#53116),#53141,.F.); +#53116 = FACE_BOUND('',#53117,.F.); +#53117 = EDGE_LOOP('',(#53118,#53119,#53127,#53135)); +#53118 = ORIENTED_EDGE('',*,*,#52256,.F.); +#53119 = ORIENTED_EDGE('',*,*,#53120,.T.); +#53120 = EDGE_CURVE('',#52257,#53121,#53123,.T.); +#53121 = VERTEX_POINT('',#53122); +#53122 = CARTESIAN_POINT('',(2.25,-1.15005,0.765)); +#53123 = LINE('',#53124,#53125); +#53124 = CARTESIAN_POINT('',(1.72,-1.15005,0.765)); +#53125 = VECTOR('',#53126,1.); +#53126 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53127 = ORIENTED_EDGE('',*,*,#53128,.F.); +#53128 = EDGE_CURVE('',#53129,#53121,#53131,.T.); +#53129 = VERTEX_POINT('',#53130); +#53130 = CARTESIAN_POINT('',(2.25,1.15005,0.765)); +#53131 = LINE('',#53132,#53133); +#53132 = CARTESIAN_POINT('',(2.25,1.15005,0.765)); +#53133 = VECTOR('',#53134,1.); +#53134 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53135 = ORIENTED_EDGE('',*,*,#53136,.F.); +#53136 = EDGE_CURVE('',#52249,#53129,#53137,.T.); +#53137 = LINE('',#53138,#53139); +#53138 = CARTESIAN_POINT('',(1.72,1.15005,0.765)); +#53139 = VECTOR('',#53140,1.); +#53140 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53141 = PLANE('',#53142); +#53142 = AXIS2_PLACEMENT_3D('',#53143,#53144,#53145); +#53143 = CARTESIAN_POINT('',(1.72,-0.38335,0.765)); +#53144 = DIRECTION('',(0.,0.,1.)); +#53145 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#53146 = ADVANCED_FACE('',(#53147),#53158,.T.); +#53147 = FACE_BOUND('',#53148,.T.); +#53148 = EDGE_LOOP('',(#53149,#53155,#53156,#53157)); +#53149 = ORIENTED_EDGE('',*,*,#53150,.T.); +#53150 = EDGE_CURVE('',#52360,#52249,#53151,.T.); +#53151 = LINE('',#53152,#53153); +#53152 = CARTESIAN_POINT('',(1.75,1.15005,0.773709888363)); +#53153 = VECTOR('',#53154,1.); +#53154 = DIRECTION('',(0.,0.,-1.)); +#53155 = ORIENTED_EDGE('',*,*,#52248,.T.); +#53156 = ORIENTED_EDGE('',*,*,#52312,.T.); +#53157 = ORIENTED_EDGE('',*,*,#52367,.F.); +#53158 = PLANE('',#53159); +#53159 = AXIS2_PLACEMENT_3D('',#53160,#53161,#53162); +#53160 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#53161 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53162 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53163 = ADVANCED_FACE('',(#53164),#53196,.F.); +#53164 = FACE_BOUND('',#53165,.F.); +#53165 = EDGE_LOOP('',(#53166,#53176,#53182,#53183,#53189,#53190)); +#53166 = ORIENTED_EDGE('',*,*,#53167,.F.); +#53167 = EDGE_CURVE('',#53168,#53170,#53172,.T.); +#53168 = VERTEX_POINT('',#53169); +#53169 = CARTESIAN_POINT('',(2.25,-1.15005,1.035)); +#53170 = VERTEX_POINT('',#53171); +#53171 = CARTESIAN_POINT('',(2.25,1.15005,1.035)); +#53172 = LINE('',#53173,#53174); +#53173 = CARTESIAN_POINT('',(2.25,-1.15005,1.035)); +#53174 = VECTOR('',#53175,1.); +#53175 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53176 = ORIENTED_EDGE('',*,*,#53177,.T.); +#53177 = EDGE_CURVE('',#53168,#53047,#53178,.T.); +#53178 = LINE('',#53179,#53180); +#53179 = CARTESIAN_POINT('',(2.25,-1.15005,1.035)); +#53180 = VECTOR('',#53181,1.); +#53181 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53182 = ORIENTED_EDGE('',*,*,#53054,.T.); +#53183 = ORIENTED_EDGE('',*,*,#53184,.T.); +#53184 = EDGE_CURVE('',#53055,#52352,#53185,.T.); +#53185 = LINE('',#53186,#53187); +#53186 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#53187 = VECTOR('',#53188,1.); +#53188 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53189 = ORIENTED_EDGE('',*,*,#52359,.F.); +#53190 = ORIENTED_EDGE('',*,*,#53191,.F.); +#53191 = EDGE_CURVE('',#53170,#52360,#53192,.T.); +#53192 = LINE('',#53193,#53194); +#53193 = CARTESIAN_POINT('',(2.25,1.15005,1.035)); +#53194 = VECTOR('',#53195,1.); +#53195 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53196 = PLANE('',#53197); +#53197 = AXIS2_PLACEMENT_3D('',#53198,#53199,#53200); +#53198 = CARTESIAN_POINT('',(2.25,-0.38335,1.035)); +#53199 = DIRECTION('',(0.,0.,-1.)); +#53200 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#53201 = ADVANCED_FACE('',(#53202),#53227,.T.); +#53202 = FACE_BOUND('',#53203,.T.); +#53203 = EDGE_LOOP('',(#53204,#53205,#53206,#53207,#53214,#53222)); +#53204 = ORIENTED_EDGE('',*,*,#53062,.T.); +#53205 = ORIENTED_EDGE('',*,*,#53184,.T.); +#53206 = ORIENTED_EDGE('',*,*,#52351,.T.); +#53207 = ORIENTED_EDGE('',*,*,#53208,.T.); +#53208 = EDGE_CURVE('',#52344,#53209,#53211,.T.); +#53209 = VERTEX_POINT('',#53210); +#53210 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#53211 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53212,#53213),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53212 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#53213 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#53214 = ORIENTED_EDGE('',*,*,#53215,.F.); +#53215 = EDGE_CURVE('',#53216,#53209,#53218,.T.); +#53216 = VERTEX_POINT('',#53217); +#53217 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#53218 = LINE('',#53219,#53220); +#53219 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#53220 = VECTOR('',#53221,1.); +#53221 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53222 = ORIENTED_EDGE('',*,*,#53223,.F.); +#53223 = EDGE_CURVE('',#53063,#53216,#53224,.T.); +#53224 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53225,#53226),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53225 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#53226 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#53227 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53228,#53229) + ,(#53230,#53231 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.47),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53228 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#53229 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#53230 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#53231 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#53232 = ADVANCED_FACE('',(#53233),#53250,.T.); +#53233 = FACE_BOUND('',#53234,.T.); +#53234 = EDGE_LOOP('',(#53235,#53236,#53243,#53249)); +#53235 = ORIENTED_EDGE('',*,*,#52343,.T.); +#53236 = ORIENTED_EDGE('',*,*,#53237,.T.); +#53237 = EDGE_CURVE('',#52336,#53238,#53240,.T.); +#53238 = VERTEX_POINT('',#53239); +#53239 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#53240 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53241,#53242),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53241 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#53242 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#53243 = ORIENTED_EDGE('',*,*,#53244,.F.); +#53244 = EDGE_CURVE('',#53209,#53238,#53245,.T.); +#53245 = LINE('',#53246,#53247); +#53246 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#53247 = VECTOR('',#53248,1.); +#53248 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53249 = ORIENTED_EDGE('',*,*,#53208,.F.); +#53250 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53251,#53252) + ,(#53253,#53254 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.47),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53251 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#53252 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#53253 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#53254 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#53255 = ADVANCED_FACE('',(#53256),#53294,.T.); +#53256 = FACE_BOUND('',#53257,.T.); +#53257 = EDGE_LOOP('',(#53258,#53259,#53265,#53266,#53272,#53273,#53279, + #53280,#53287,#53293)); +#53258 = ORIENTED_EDGE('',*,*,#52335,.T.); +#53259 = ORIENTED_EDGE('',*,*,#53260,.T.); +#53260 = EDGE_CURVE('',#52328,#52583,#53261,.T.); +#53261 = LINE('',#53262,#53263); +#53262 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#53263 = VECTOR('',#53264,1.); +#53264 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53265 = ORIENTED_EDGE('',*,*,#52599,.T.); +#53266 = ORIENTED_EDGE('',*,*,#53267,.T.); +#53267 = EDGE_CURVE('',#52592,#52815,#53268,.T.); +#53268 = LINE('',#53269,#53270); +#53269 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#53270 = VECTOR('',#53271,1.); +#53271 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53272 = ORIENTED_EDGE('',*,*,#52831,.T.); +#53273 = ORIENTED_EDGE('',*,*,#53274,.T.); +#53274 = EDGE_CURVE('',#52824,#53079,#53275,.T.); +#53275 = LINE('',#53276,#53277); +#53276 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#53277 = VECTOR('',#53278,1.); +#53278 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53279 = ORIENTED_EDGE('',*,*,#53078,.T.); +#53280 = ORIENTED_EDGE('',*,*,#53281,.T.); +#53281 = EDGE_CURVE('',#53071,#53282,#53284,.T.); +#53282 = VERTEX_POINT('',#53283); +#53283 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#53284 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53285,#53286),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53285 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#53286 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#53287 = ORIENTED_EDGE('',*,*,#53288,.F.); +#53288 = EDGE_CURVE('',#53238,#53282,#53289,.T.); +#53289 = LINE('',#53290,#53291); +#53290 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#53291 = VECTOR('',#53292,1.); +#53292 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53293 = ORIENTED_EDGE('',*,*,#53237,.F.); +#53294 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53295,#53296) + ,(#53297,#53298 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.47),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53295 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#53296 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#53297 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#53298 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#53299 = ADVANCED_FACE('',(#53300),#53313,.F.); +#53300 = FACE_BOUND('',#53301,.F.); +#53301 = EDGE_LOOP('',(#53302,#53303,#53309,#53310,#53311,#53312)); +#53302 = ORIENTED_EDGE('',*,*,#52551,.F.); +#53303 = ORIENTED_EDGE('',*,*,#53304,.T.); +#53304 = EDGE_CURVE('',#52543,#52451,#53305,.T.); +#53305 = LINE('',#53306,#53307); +#53306 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#53307 = VECTOR('',#53308,1.); +#53308 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53309 = ORIENTED_EDGE('',*,*,#52459,.T.); +#53310 = ORIENTED_EDGE('',*,*,#52327,.T.); +#53311 = ORIENTED_EDGE('',*,*,#53260,.T.); +#53312 = ORIENTED_EDGE('',*,*,#52582,.F.); +#53313 = PLANE('',#53314); +#53314 = AXIS2_PLACEMENT_3D('',#53315,#53316,#53317); +#53315 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#53316 = DIRECTION('',(0.,0.,-1.)); +#53317 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53318 = ADVANCED_FACE('',(#53319),#53330,.T.); +#53319 = FACE_BOUND('',#53320,.T.); +#53320 = EDGE_LOOP('',(#53321,#53322,#53323,#53324)); +#53321 = ORIENTED_EDGE('',*,*,#52542,.T.); +#53322 = ORIENTED_EDGE('',*,*,#53304,.T.); +#53323 = ORIENTED_EDGE('',*,*,#52450,.F.); +#53324 = ORIENTED_EDGE('',*,*,#53325,.F.); +#53325 = EDGE_CURVE('',#52535,#52443,#53326,.T.); +#53326 = LINE('',#53327,#53328); +#53327 = CARTESIAN_POINT('',(-2.712859643916,1.91675,0.646614643503)); +#53328 = VECTOR('',#53329,1.); +#53329 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53330 = CYLINDRICAL_SURFACE('',#53331,0.47); +#53331 = AXIS2_PLACEMENT_3D('',#53332,#53333,#53334); +#53332 = CARTESIAN_POINT('',(-2.25,1.91675,0.565)); +#53333 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53334 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#53335 = ADVANCED_FACE('',(#53336),#53347,.F.); +#53336 = FACE_BOUND('',#53337,.F.); +#53337 = EDGE_LOOP('',(#53338,#53344,#53345,#53346)); +#53338 = ORIENTED_EDGE('',*,*,#53339,.T.); +#53339 = EDGE_CURVE('',#52526,#52434,#53340,.T.); +#53340 = LINE('',#53341,#53342); +#53341 = CARTESIAN_POINT('',(-2.739789512565,1.91675,0.435270364467)); +#53342 = VECTOR('',#53343,1.); +#53343 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53344 = ORIENTED_EDGE('',*,*,#52442,.T.); +#53345 = ORIENTED_EDGE('',*,*,#53325,.F.); +#53346 = ORIENTED_EDGE('',*,*,#52534,.F.); +#53347 = PLANE('',#53348); +#53348 = AXIS2_PLACEMENT_3D('',#53349,#53350,#53351); +#53349 = CARTESIAN_POINT('',(-2.739789512565,1.91675,0.435270364467)); +#53350 = DIRECTION('',(0.991979380222,-1.135060249332E-17, + -0.126399799104)); +#53351 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#53352 = ADVANCED_FACE('',(#53353),#53364,.F.); +#53353 = FACE_BOUND('',#53354,.F.); +#53354 = EDGE_LOOP('',(#53355,#53361,#53362,#53363)); +#53355 = ORIENTED_EDGE('',*,*,#53356,.T.); +#53356 = EDGE_CURVE('',#52518,#52426,#53357,.T.); +#53357 = LINE('',#53358,#53359); +#53358 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.27)); +#53359 = VECTOR('',#53360,1.); +#53360 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53361 = ORIENTED_EDGE('',*,*,#52433,.T.); +#53362 = ORIENTED_EDGE('',*,*,#53339,.F.); +#53363 = ORIENTED_EDGE('',*,*,#52525,.F.); +#53364 = CYLINDRICAL_SURFACE('',#53365,0.2); +#53365 = AXIS2_PLACEMENT_3D('',#53366,#53367,#53368); +#53366 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.47)); +#53367 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53368 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#53369 = ADVANCED_FACE('',(#53370),#53381,.F.); +#53370 = FACE_BOUND('',#53371,.F.); +#53371 = EDGE_LOOP('',(#53372,#53378,#53379,#53380)); +#53372 = ORIENTED_EDGE('',*,*,#53373,.T.); +#53373 = EDGE_CURVE('',#52510,#52418,#53374,.T.); +#53374 = LINE('',#53375,#53376); +#53375 = CARTESIAN_POINT('',(-3.5,1.91675,0.27)); +#53376 = VECTOR('',#53377,1.); +#53377 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53378 = ORIENTED_EDGE('',*,*,#52425,.T.); +#53379 = ORIENTED_EDGE('',*,*,#53356,.F.); +#53380 = ORIENTED_EDGE('',*,*,#52517,.F.); +#53381 = PLANE('',#53382); +#53382 = AXIS2_PLACEMENT_3D('',#53383,#53384,#53385); +#53383 = CARTESIAN_POINT('',(-3.5,1.91675,0.27)); +#53384 = DIRECTION('',(0.,0.,-1.)); +#53385 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53386 = ADVANCED_FACE('',(#53387),#53398,.F.); +#53387 = FACE_BOUND('',#53388,.F.); +#53388 = EDGE_LOOP('',(#53389,#53395,#53396,#53397)); +#53389 = ORIENTED_EDGE('',*,*,#53390,.T.); +#53390 = EDGE_CURVE('',#52502,#52410,#53391,.T.); +#53391 = LINE('',#53392,#53393); +#53392 = CARTESIAN_POINT('',(-3.5,1.91675,-1.665334536938E-16)); +#53393 = VECTOR('',#53394,1.); +#53394 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53395 = ORIENTED_EDGE('',*,*,#52417,.T.); +#53396 = ORIENTED_EDGE('',*,*,#53373,.F.); +#53397 = ORIENTED_EDGE('',*,*,#52509,.F.); +#53398 = PLANE('',#53399); +#53399 = AXIS2_PLACEMENT_3D('',#53400,#53401,#53402); +#53400 = CARTESIAN_POINT('',(-3.5,1.91675,-1.665334536938E-16)); +#53401 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53402 = DIRECTION('',(0.,0.,1.)); +#53403 = ADVANCED_FACE('',(#53404),#53415,.F.); +#53404 = FACE_BOUND('',#53405,.F.); +#53405 = EDGE_LOOP('',(#53406,#53412,#53413,#53414)); +#53406 = ORIENTED_EDGE('',*,*,#53407,.T.); +#53407 = EDGE_CURVE('',#52493,#52401,#53408,.T.); +#53408 = LINE('',#53409,#53410); +#53409 = CARTESIAN_POINT('',(-2.936751063167,1.91675,-1.665334536938E-16 + )); +#53410 = VECTOR('',#53411,1.); +#53411 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53412 = ORIENTED_EDGE('',*,*,#52409,.T.); +#53413 = ORIENTED_EDGE('',*,*,#53390,.F.); +#53414 = ORIENTED_EDGE('',*,*,#52501,.F.); +#53415 = PLANE('',#53416); +#53416 = AXIS2_PLACEMENT_3D('',#53417,#53418,#53419); +#53417 = CARTESIAN_POINT('',(-2.936751063167,1.91675,-1.665334536938E-16 + )); +#53418 = DIRECTION('',(0.,0.,1.)); +#53419 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53420 = ADVANCED_FACE('',(#53421),#53432,.T.); +#53421 = FACE_BOUND('',#53422,.T.); +#53422 = EDGE_LOOP('',(#53423,#53424,#53425,#53426)); +#53423 = ORIENTED_EDGE('',*,*,#52492,.T.); +#53424 = ORIENTED_EDGE('',*,*,#53407,.T.); +#53425 = ORIENTED_EDGE('',*,*,#52400,.F.); +#53426 = ORIENTED_EDGE('',*,*,#53427,.F.); +#53427 = EDGE_CURVE('',#52485,#52393,#53428,.T.); +#53428 = LINE('',#53429,#53430); +#53429 = CARTESIAN_POINT('',(-2.473891419252,1.91675,0.388385356497)); +#53430 = VECTOR('',#53431,1.); +#53431 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53432 = CYLINDRICAL_SURFACE('',#53433,0.47); +#53433 = AXIS2_PLACEMENT_3D('',#53434,#53435,#53436); +#53434 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.47)); +#53435 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53436 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#53437 = ADVANCED_FACE('',(#53438),#53444,.F.); +#53438 = FACE_BOUND('',#53439,.F.); +#53439 = EDGE_LOOP('',(#53440,#53441,#53442,#53443)); +#53440 = ORIENTED_EDGE('',*,*,#52567,.T.); +#53441 = ORIENTED_EDGE('',*,*,#52392,.T.); +#53442 = ORIENTED_EDGE('',*,*,#53427,.F.); +#53443 = ORIENTED_EDGE('',*,*,#52484,.F.); +#53444 = PLANE('',#53445); +#53445 = AXIS2_PLACEMENT_3D('',#53446,#53447,#53448); +#53446 = CARTESIAN_POINT('',(-2.446961550602,1.91675,0.599729635533)); +#53447 = DIRECTION('',(-0.991979380222,1.135060249332E-17,0.126399799104 + )); +#53448 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#53449 = ADVANCED_FACE('',(#53450),#53463,.F.); +#53450 = FACE_BOUND('',#53451,.F.); +#53451 = EDGE_LOOP('',(#53452,#53453,#53459,#53460,#53461,#53462)); +#53452 = ORIENTED_EDGE('',*,*,#52783,.F.); +#53453 = ORIENTED_EDGE('',*,*,#53454,.T.); +#53454 = EDGE_CURVE('',#52775,#52683,#53455,.T.); +#53455 = LINE('',#53456,#53457); +#53456 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#53457 = VECTOR('',#53458,1.); +#53458 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53459 = ORIENTED_EDGE('',*,*,#52691,.T.); +#53460 = ORIENTED_EDGE('',*,*,#52591,.T.); +#53461 = ORIENTED_EDGE('',*,*,#53267,.T.); +#53462 = ORIENTED_EDGE('',*,*,#52814,.F.); +#53463 = PLANE('',#53464); +#53464 = AXIS2_PLACEMENT_3D('',#53465,#53466,#53467); +#53465 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#53466 = DIRECTION('',(0.,0.,-1.)); +#53467 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53468 = ADVANCED_FACE('',(#53469),#53480,.T.); +#53469 = FACE_BOUND('',#53470,.T.); +#53470 = EDGE_LOOP('',(#53471,#53472,#53473,#53474)); +#53471 = ORIENTED_EDGE('',*,*,#52774,.T.); +#53472 = ORIENTED_EDGE('',*,*,#53454,.T.); +#53473 = ORIENTED_EDGE('',*,*,#52682,.F.); +#53474 = ORIENTED_EDGE('',*,*,#53475,.F.); +#53475 = EDGE_CURVE('',#52767,#52675,#53476,.T.); +#53476 = LINE('',#53477,#53478); +#53477 = CARTESIAN_POINT('',(-2.712859643916,-0.38335,0.646614643503)); +#53478 = VECTOR('',#53479,1.); +#53479 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53480 = CYLINDRICAL_SURFACE('',#53481,0.47); +#53481 = AXIS2_PLACEMENT_3D('',#53482,#53483,#53484); +#53482 = CARTESIAN_POINT('',(-2.25,-0.38335,0.565)); +#53483 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53484 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#53485 = ADVANCED_FACE('',(#53486),#53497,.F.); +#53486 = FACE_BOUND('',#53487,.F.); +#53487 = EDGE_LOOP('',(#53488,#53494,#53495,#53496)); +#53488 = ORIENTED_EDGE('',*,*,#53489,.T.); +#53489 = EDGE_CURVE('',#52758,#52666,#53490,.T.); +#53490 = LINE('',#53491,#53492); +#53491 = CARTESIAN_POINT('',(-2.739789512565,-0.38335,0.435270364467)); +#53492 = VECTOR('',#53493,1.); +#53493 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53494 = ORIENTED_EDGE('',*,*,#52674,.T.); +#53495 = ORIENTED_EDGE('',*,*,#53475,.F.); +#53496 = ORIENTED_EDGE('',*,*,#52766,.F.); +#53497 = PLANE('',#53498); +#53498 = AXIS2_PLACEMENT_3D('',#53499,#53500,#53501); +#53499 = CARTESIAN_POINT('',(-2.739789512565,-0.38335,0.435270364467)); +#53500 = DIRECTION('',(0.991979380222,-1.135060249332E-17, + -0.126399799104)); +#53501 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#53502 = ADVANCED_FACE('',(#53503),#53514,.F.); +#53503 = FACE_BOUND('',#53504,.F.); +#53504 = EDGE_LOOP('',(#53505,#53511,#53512,#53513)); +#53505 = ORIENTED_EDGE('',*,*,#53506,.T.); +#53506 = EDGE_CURVE('',#52750,#52658,#53507,.T.); +#53507 = LINE('',#53508,#53509); +#53508 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.27)); +#53509 = VECTOR('',#53510,1.); +#53510 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53511 = ORIENTED_EDGE('',*,*,#52665,.T.); +#53512 = ORIENTED_EDGE('',*,*,#53489,.F.); +#53513 = ORIENTED_EDGE('',*,*,#52757,.F.); +#53514 = CYLINDRICAL_SURFACE('',#53515,0.2); +#53515 = AXIS2_PLACEMENT_3D('',#53516,#53517,#53518); +#53516 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.47)); +#53517 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53518 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#53519 = ADVANCED_FACE('',(#53520),#53531,.F.); +#53520 = FACE_BOUND('',#53521,.F.); +#53521 = EDGE_LOOP('',(#53522,#53528,#53529,#53530)); +#53522 = ORIENTED_EDGE('',*,*,#53523,.T.); +#53523 = EDGE_CURVE('',#52742,#52650,#53524,.T.); +#53524 = LINE('',#53525,#53526); +#53525 = CARTESIAN_POINT('',(-3.5,-0.38335,0.27)); +#53526 = VECTOR('',#53527,1.); +#53527 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53528 = ORIENTED_EDGE('',*,*,#52657,.T.); +#53529 = ORIENTED_EDGE('',*,*,#53506,.F.); +#53530 = ORIENTED_EDGE('',*,*,#52749,.F.); +#53531 = PLANE('',#53532); +#53532 = AXIS2_PLACEMENT_3D('',#53533,#53534,#53535); +#53533 = CARTESIAN_POINT('',(-3.5,-0.38335,0.27)); +#53534 = DIRECTION('',(0.,0.,-1.)); +#53535 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53536 = ADVANCED_FACE('',(#53537),#53548,.F.); +#53537 = FACE_BOUND('',#53538,.F.); +#53538 = EDGE_LOOP('',(#53539,#53545,#53546,#53547)); +#53539 = ORIENTED_EDGE('',*,*,#53540,.T.); +#53540 = EDGE_CURVE('',#52734,#52642,#53541,.T.); +#53541 = LINE('',#53542,#53543); +#53542 = CARTESIAN_POINT('',(-3.5,-0.38335,-1.665334536938E-16)); +#53543 = VECTOR('',#53544,1.); +#53544 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53545 = ORIENTED_EDGE('',*,*,#52649,.T.); +#53546 = ORIENTED_EDGE('',*,*,#53523,.F.); +#53547 = ORIENTED_EDGE('',*,*,#52741,.F.); +#53548 = PLANE('',#53549); +#53549 = AXIS2_PLACEMENT_3D('',#53550,#53551,#53552); +#53550 = CARTESIAN_POINT('',(-3.5,-0.38335,-1.665334536938E-16)); +#53551 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53552 = DIRECTION('',(0.,0.,1.)); +#53553 = ADVANCED_FACE('',(#53554),#53565,.F.); +#53554 = FACE_BOUND('',#53555,.F.); +#53555 = EDGE_LOOP('',(#53556,#53562,#53563,#53564)); +#53556 = ORIENTED_EDGE('',*,*,#53557,.T.); +#53557 = EDGE_CURVE('',#52725,#52633,#53558,.T.); +#53558 = LINE('',#53559,#53560); +#53559 = CARTESIAN_POINT('',(-2.936751063167,-0.38335, + -1.665334536938E-16)); +#53560 = VECTOR('',#53561,1.); +#53561 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53562 = ORIENTED_EDGE('',*,*,#52641,.T.); +#53563 = ORIENTED_EDGE('',*,*,#53540,.F.); +#53564 = ORIENTED_EDGE('',*,*,#52733,.F.); +#53565 = PLANE('',#53566); +#53566 = AXIS2_PLACEMENT_3D('',#53567,#53568,#53569); +#53567 = CARTESIAN_POINT('',(-2.936751063167,-0.38335, + -1.665334536938E-16)); +#53568 = DIRECTION('',(0.,0.,1.)); +#53569 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53570 = ADVANCED_FACE('',(#53571),#53582,.T.); +#53571 = FACE_BOUND('',#53572,.T.); +#53572 = EDGE_LOOP('',(#53573,#53574,#53575,#53576)); +#53573 = ORIENTED_EDGE('',*,*,#52724,.T.); +#53574 = ORIENTED_EDGE('',*,*,#53557,.T.); +#53575 = ORIENTED_EDGE('',*,*,#52632,.F.); +#53576 = ORIENTED_EDGE('',*,*,#53577,.F.); +#53577 = EDGE_CURVE('',#52717,#52625,#53578,.T.); +#53578 = LINE('',#53579,#53580); +#53579 = CARTESIAN_POINT('',(-2.473891419252,-0.38335,0.388385356497)); +#53580 = VECTOR('',#53581,1.); +#53581 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53582 = CYLINDRICAL_SURFACE('',#53583,0.47); +#53583 = AXIS2_PLACEMENT_3D('',#53584,#53585,#53586); +#53584 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.47)); +#53585 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53586 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#53587 = ADVANCED_FACE('',(#53588),#53594,.F.); +#53588 = FACE_BOUND('',#53589,.F.); +#53589 = EDGE_LOOP('',(#53590,#53591,#53592,#53593)); +#53590 = ORIENTED_EDGE('',*,*,#52799,.T.); +#53591 = ORIENTED_EDGE('',*,*,#52624,.T.); +#53592 = ORIENTED_EDGE('',*,*,#53577,.F.); +#53593 = ORIENTED_EDGE('',*,*,#52716,.F.); +#53594 = PLANE('',#53595); +#53595 = AXIS2_PLACEMENT_3D('',#53596,#53597,#53598); +#53596 = CARTESIAN_POINT('',(-2.446961550602,-0.38335,0.599729635533)); +#53597 = DIRECTION('',(-0.991979380222,1.135060249332E-17,0.126399799104 + )); +#53598 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#53599 = ADVANCED_FACE('',(#53600),#53613,.F.); +#53600 = FACE_BOUND('',#53601,.F.); +#53601 = EDGE_LOOP('',(#53602,#53603,#53609,#53610,#53611,#53612)); +#53602 = ORIENTED_EDGE('',*,*,#53015,.F.); +#53603 = ORIENTED_EDGE('',*,*,#53604,.T.); +#53604 = EDGE_CURVE('',#53007,#52915,#53605,.T.); +#53605 = LINE('',#53606,#53607); +#53606 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#53607 = VECTOR('',#53608,1.); +#53608 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53609 = ORIENTED_EDGE('',*,*,#52923,.T.); +#53610 = ORIENTED_EDGE('',*,*,#52823,.T.); +#53611 = ORIENTED_EDGE('',*,*,#53274,.T.); +#53612 = ORIENTED_EDGE('',*,*,#53086,.F.); +#53613 = PLANE('',#53614); +#53614 = AXIS2_PLACEMENT_3D('',#53615,#53616,#53617); +#53615 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#53616 = DIRECTION('',(0.,0.,-1.)); +#53617 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53618 = ADVANCED_FACE('',(#53619),#53630,.T.); +#53619 = FACE_BOUND('',#53620,.T.); +#53620 = EDGE_LOOP('',(#53621,#53622,#53623,#53624)); +#53621 = ORIENTED_EDGE('',*,*,#53006,.T.); +#53622 = ORIENTED_EDGE('',*,*,#53604,.T.); +#53623 = ORIENTED_EDGE('',*,*,#52914,.F.); +#53624 = ORIENTED_EDGE('',*,*,#53625,.F.); +#53625 = EDGE_CURVE('',#52999,#52907,#53626,.T.); +#53626 = LINE('',#53627,#53628); +#53627 = CARTESIAN_POINT('',(-2.712859643916,-2.68345,0.646614643503)); +#53628 = VECTOR('',#53629,1.); +#53629 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53630 = CYLINDRICAL_SURFACE('',#53631,0.47); +#53631 = AXIS2_PLACEMENT_3D('',#53632,#53633,#53634); +#53632 = CARTESIAN_POINT('',(-2.25,-2.68345,0.565)); +#53633 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53634 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#53635 = ADVANCED_FACE('',(#53636),#53647,.F.); +#53636 = FACE_BOUND('',#53637,.F.); +#53637 = EDGE_LOOP('',(#53638,#53644,#53645,#53646)); +#53638 = ORIENTED_EDGE('',*,*,#53639,.T.); +#53639 = EDGE_CURVE('',#52990,#52898,#53640,.T.); +#53640 = LINE('',#53641,#53642); +#53641 = CARTESIAN_POINT('',(-2.739789512565,-2.68345,0.435270364467)); +#53642 = VECTOR('',#53643,1.); +#53643 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53644 = ORIENTED_EDGE('',*,*,#52906,.T.); +#53645 = ORIENTED_EDGE('',*,*,#53625,.F.); +#53646 = ORIENTED_EDGE('',*,*,#52998,.F.); +#53647 = PLANE('',#53648); +#53648 = AXIS2_PLACEMENT_3D('',#53649,#53650,#53651); +#53649 = CARTESIAN_POINT('',(-2.739789512565,-2.68345,0.435270364467)); +#53650 = DIRECTION('',(0.991979380222,-1.135060249332E-17, + -0.126399799104)); +#53651 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#53652 = ADVANCED_FACE('',(#53653),#53664,.F.); +#53653 = FACE_BOUND('',#53654,.F.); +#53654 = EDGE_LOOP('',(#53655,#53661,#53662,#53663)); +#53655 = ORIENTED_EDGE('',*,*,#53656,.T.); +#53656 = EDGE_CURVE('',#52982,#52890,#53657,.T.); +#53657 = LINE('',#53658,#53659); +#53658 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.27)); +#53659 = VECTOR('',#53660,1.); +#53660 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53661 = ORIENTED_EDGE('',*,*,#52897,.T.); +#53662 = ORIENTED_EDGE('',*,*,#53639,.F.); +#53663 = ORIENTED_EDGE('',*,*,#52989,.F.); +#53664 = CYLINDRICAL_SURFACE('',#53665,0.2); +#53665 = AXIS2_PLACEMENT_3D('',#53666,#53667,#53668); +#53666 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.47)); +#53667 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53668 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#53669 = ADVANCED_FACE('',(#53670),#53681,.F.); +#53670 = FACE_BOUND('',#53671,.F.); +#53671 = EDGE_LOOP('',(#53672,#53678,#53679,#53680)); +#53672 = ORIENTED_EDGE('',*,*,#53673,.T.); +#53673 = EDGE_CURVE('',#52974,#52882,#53674,.T.); +#53674 = LINE('',#53675,#53676); +#53675 = CARTESIAN_POINT('',(-3.5,-2.68345,0.27)); +#53676 = VECTOR('',#53677,1.); +#53677 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53678 = ORIENTED_EDGE('',*,*,#52889,.T.); +#53679 = ORIENTED_EDGE('',*,*,#53656,.F.); +#53680 = ORIENTED_EDGE('',*,*,#52981,.F.); +#53681 = PLANE('',#53682); +#53682 = AXIS2_PLACEMENT_3D('',#53683,#53684,#53685); +#53683 = CARTESIAN_POINT('',(-3.5,-2.68345,0.27)); +#53684 = DIRECTION('',(0.,0.,-1.)); +#53685 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53686 = ADVANCED_FACE('',(#53687),#53698,.F.); +#53687 = FACE_BOUND('',#53688,.F.); +#53688 = EDGE_LOOP('',(#53689,#53695,#53696,#53697)); +#53689 = ORIENTED_EDGE('',*,*,#53690,.T.); +#53690 = EDGE_CURVE('',#52966,#52874,#53691,.T.); +#53691 = LINE('',#53692,#53693); +#53692 = CARTESIAN_POINT('',(-3.5,-2.68345,-1.665334536938E-16)); +#53693 = VECTOR('',#53694,1.); +#53694 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53695 = ORIENTED_EDGE('',*,*,#52881,.T.); +#53696 = ORIENTED_EDGE('',*,*,#53673,.F.); +#53697 = ORIENTED_EDGE('',*,*,#52973,.F.); +#53698 = PLANE('',#53699); +#53699 = AXIS2_PLACEMENT_3D('',#53700,#53701,#53702); +#53700 = CARTESIAN_POINT('',(-3.5,-2.68345,-1.665334536938E-16)); +#53701 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#53702 = DIRECTION('',(0.,0.,1.)); +#53703 = ADVANCED_FACE('',(#53704),#53715,.F.); +#53704 = FACE_BOUND('',#53705,.F.); +#53705 = EDGE_LOOP('',(#53706,#53712,#53713,#53714)); +#53706 = ORIENTED_EDGE('',*,*,#53707,.T.); +#53707 = EDGE_CURVE('',#52957,#52865,#53708,.T.); +#53708 = LINE('',#53709,#53710); +#53709 = CARTESIAN_POINT('',(-2.936751063167,-2.68345, + -1.665334536938E-16)); +#53710 = VECTOR('',#53711,1.); +#53711 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53712 = ORIENTED_EDGE('',*,*,#52873,.T.); +#53713 = ORIENTED_EDGE('',*,*,#53690,.F.); +#53714 = ORIENTED_EDGE('',*,*,#52965,.F.); +#53715 = PLANE('',#53716); +#53716 = AXIS2_PLACEMENT_3D('',#53717,#53718,#53719); +#53717 = CARTESIAN_POINT('',(-2.936751063167,-2.68345, + -1.665334536938E-16)); +#53718 = DIRECTION('',(0.,0.,1.)); +#53719 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53720 = ADVANCED_FACE('',(#53721),#53732,.T.); +#53721 = FACE_BOUND('',#53722,.T.); +#53722 = EDGE_LOOP('',(#53723,#53724,#53725,#53726)); +#53723 = ORIENTED_EDGE('',*,*,#52956,.T.); +#53724 = ORIENTED_EDGE('',*,*,#53707,.T.); +#53725 = ORIENTED_EDGE('',*,*,#52864,.F.); +#53726 = ORIENTED_EDGE('',*,*,#53727,.F.); +#53727 = EDGE_CURVE('',#52949,#52857,#53728,.T.); +#53728 = LINE('',#53729,#53730); +#53729 = CARTESIAN_POINT('',(-2.473891419252,-2.68345,0.388385356497)); +#53730 = VECTOR('',#53731,1.); +#53731 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53732 = CYLINDRICAL_SURFACE('',#53733,0.47); +#53733 = AXIS2_PLACEMENT_3D('',#53734,#53735,#53736); +#53734 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.47)); +#53735 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#53736 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#53737 = ADVANCED_FACE('',(#53738),#53744,.F.); +#53738 = FACE_BOUND('',#53739,.F.); +#53739 = EDGE_LOOP('',(#53740,#53741,#53742,#53743)); +#53740 = ORIENTED_EDGE('',*,*,#53031,.T.); +#53741 = ORIENTED_EDGE('',*,*,#52856,.T.); +#53742 = ORIENTED_EDGE('',*,*,#53727,.F.); +#53743 = ORIENTED_EDGE('',*,*,#52948,.F.); +#53744 = PLANE('',#53745); +#53745 = AXIS2_PLACEMENT_3D('',#53746,#53747,#53748); +#53746 = CARTESIAN_POINT('',(-2.446961550602,-2.68345,0.599729635533)); +#53747 = DIRECTION('',(-0.991979380222,1.135060249332E-17,0.126399799104 + )); +#53748 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#53749 = ADVANCED_FACE('',(#53750),#53761,.T.); +#53750 = FACE_BOUND('',#53751,.T.); +#53751 = EDGE_LOOP('',(#53752,#53753,#53754,#53760)); +#53752 = ORIENTED_EDGE('',*,*,#53070,.T.); +#53753 = ORIENTED_EDGE('',*,*,#53223,.T.); +#53754 = ORIENTED_EDGE('',*,*,#53755,.F.); +#53755 = EDGE_CURVE('',#53282,#53216,#53756,.T.); +#53756 = LINE('',#53757,#53758); +#53757 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#53758 = VECTOR('',#53759,1.); +#53759 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53760 = ORIENTED_EDGE('',*,*,#53281,.F.); +#53761 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53762,#53763) + ,(#53764,#53765 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.47),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53762 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#53763 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#53764 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#53765 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#53766 = ADVANCED_FACE('',(#53767),#53846,.T.); +#53767 = FACE_BOUND('',#53768,.T.); +#53768 = EDGE_LOOP('',(#53769,#53770,#53771,#53780,#53788,#53797,#53805, + #53813,#53821,#53830,#53838,#53845)); +#53769 = ORIENTED_EDGE('',*,*,#53104,.T.); +#53770 = ORIENTED_EDGE('',*,*,#53120,.T.); +#53771 = ORIENTED_EDGE('',*,*,#53772,.T.); +#53772 = EDGE_CURVE('',#53121,#53773,#53775,.T.); +#53773 = VERTEX_POINT('',#53774); +#53774 = CARTESIAN_POINT('',(2.446961550602,-1.15005,0.599729635533)); +#53775 = CIRCLE('',#53776,0.2); +#53776 = AXIS2_PLACEMENT_3D('',#53777,#53778,#53779); +#53777 = CARTESIAN_POINT('',(2.25,-1.15005,0.565)); +#53778 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53779 = DIRECTION('',(0.,0.,1.)); +#53780 = ORIENTED_EDGE('',*,*,#53781,.T.); +#53781 = EDGE_CURVE('',#53773,#53782,#53784,.T.); +#53782 = VERTEX_POINT('',#53783); +#53783 = CARTESIAN_POINT('',(2.473891419252,-1.15005,0.388385356497)); +#53784 = LINE('',#53785,#53786); +#53785 = CARTESIAN_POINT('',(2.446961550602,-1.15005,0.599729635533)); +#53786 = VECTOR('',#53787,1.); +#53787 = DIRECTION('',(0.126399799104,1.403319672733E-17,-0.991979380222 + )); +#53788 = ORIENTED_EDGE('',*,*,#53789,.T.); +#53789 = EDGE_CURVE('',#53782,#53790,#53792,.T.); +#53790 = VERTEX_POINT('',#53791); +#53791 = CARTESIAN_POINT('',(2.936751063167,-1.15005,-1.665334536938E-16 + )); +#53792 = CIRCLE('',#53793,0.47); +#53793 = AXIS2_PLACEMENT_3D('',#53794,#53795,#53796); +#53794 = CARTESIAN_POINT('',(2.936751063167,-1.15005,0.47)); +#53795 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53796 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#53797 = ORIENTED_EDGE('',*,*,#53798,.T.); +#53798 = EDGE_CURVE('',#53790,#53799,#53801,.T.); +#53799 = VERTEX_POINT('',#53800); +#53800 = CARTESIAN_POINT('',(3.5,-1.15005,-1.665334536938E-16)); +#53801 = LINE('',#53802,#53803); +#53802 = CARTESIAN_POINT('',(2.936751063167,-1.15005,-1.665334536938E-16 + )); +#53803 = VECTOR('',#53804,1.); +#53804 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53805 = ORIENTED_EDGE('',*,*,#53806,.T.); +#53806 = EDGE_CURVE('',#53799,#53807,#53809,.T.); +#53807 = VERTEX_POINT('',#53808); +#53808 = CARTESIAN_POINT('',(3.5,-1.15005,0.27)); +#53809 = LINE('',#53810,#53811); +#53810 = CARTESIAN_POINT('',(3.5,-1.15005,-1.665334536938E-16)); +#53811 = VECTOR('',#53812,1.); +#53812 = DIRECTION('',(0.,0.,1.)); +#53813 = ORIENTED_EDGE('',*,*,#53814,.T.); +#53814 = EDGE_CURVE('',#53807,#53815,#53817,.T.); +#53815 = VERTEX_POINT('',#53816); +#53816 = CARTESIAN_POINT('',(2.936751063167,-1.15005,0.27)); +#53817 = LINE('',#53818,#53819); +#53818 = CARTESIAN_POINT('',(3.5,-1.15005,0.27)); +#53819 = VECTOR('',#53820,1.); +#53820 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53821 = ORIENTED_EDGE('',*,*,#53822,.T.); +#53822 = EDGE_CURVE('',#53815,#53823,#53825,.T.); +#53823 = VERTEX_POINT('',#53824); +#53824 = CARTESIAN_POINT('',(2.739789512565,-1.15005,0.435270364467)); +#53825 = CIRCLE('',#53826,0.2); +#53826 = AXIS2_PLACEMENT_3D('',#53827,#53828,#53829); +#53827 = CARTESIAN_POINT('',(2.936751063167,-1.15005,0.47)); +#53828 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53829 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#53830 = ORIENTED_EDGE('',*,*,#53831,.T.); +#53831 = EDGE_CURVE('',#53823,#53832,#53834,.T.); +#53832 = VERTEX_POINT('',#53833); +#53833 = CARTESIAN_POINT('',(2.712859643916,-1.15005,0.646614643503)); +#53834 = LINE('',#53835,#53836); +#53835 = CARTESIAN_POINT('',(2.739789512565,-1.15005,0.435270364467)); +#53836 = VECTOR('',#53837,1.); +#53837 = DIRECTION('',(-0.126399799104,-1.403319672733E-17, + 0.991979380222)); +#53838 = ORIENTED_EDGE('',*,*,#53839,.T.); +#53839 = EDGE_CURVE('',#53832,#53168,#53840,.T.); +#53840 = CIRCLE('',#53841,0.47); +#53841 = AXIS2_PLACEMENT_3D('',#53842,#53843,#53844); +#53842 = CARTESIAN_POINT('',(2.25,-1.15005,0.565)); +#53843 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53844 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#53845 = ORIENTED_EDGE('',*,*,#53177,.T.); +#53846 = PLANE('',#53847); +#53847 = AXIS2_PLACEMENT_3D('',#53848,#53849,#53850); +#53848 = CARTESIAN_POINT('',(2.606989201797,-1.15005,0.512419776725)); +#53849 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53850 = DIRECTION('',(0.,0.,1.)); +#53851 = ADVANCED_FACE('',(#53852),#53931,.F.); +#53852 = FACE_BOUND('',#53853,.F.); +#53853 = EDGE_LOOP('',(#53854,#53855,#53856,#53865,#53873,#53882,#53890, + #53898,#53906,#53915,#53923,#53930)); +#53854 = ORIENTED_EDGE('',*,*,#53150,.T.); +#53855 = ORIENTED_EDGE('',*,*,#53136,.T.); +#53856 = ORIENTED_EDGE('',*,*,#53857,.T.); +#53857 = EDGE_CURVE('',#53129,#53858,#53860,.T.); +#53858 = VERTEX_POINT('',#53859); +#53859 = CARTESIAN_POINT('',(2.446961550602,1.15005,0.599729635533)); +#53860 = CIRCLE('',#53861,0.2); +#53861 = AXIS2_PLACEMENT_3D('',#53862,#53863,#53864); +#53862 = CARTESIAN_POINT('',(2.25,1.15005,0.565)); +#53863 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53864 = DIRECTION('',(0.,0.,1.)); +#53865 = ORIENTED_EDGE('',*,*,#53866,.T.); +#53866 = EDGE_CURVE('',#53858,#53867,#53869,.T.); +#53867 = VERTEX_POINT('',#53868); +#53868 = CARTESIAN_POINT('',(2.473891419252,1.15005,0.388385356497)); +#53869 = LINE('',#53870,#53871); +#53870 = CARTESIAN_POINT('',(2.446961550602,1.15005,0.599729635533)); +#53871 = VECTOR('',#53872,1.); +#53872 = DIRECTION('',(0.126399799104,1.403319672733E-17,-0.991979380222 + )); +#53873 = ORIENTED_EDGE('',*,*,#53874,.T.); +#53874 = EDGE_CURVE('',#53867,#53875,#53877,.T.); +#53875 = VERTEX_POINT('',#53876); +#53876 = CARTESIAN_POINT('',(2.936751063167,1.15005,-1.665334536938E-16) + ); +#53877 = CIRCLE('',#53878,0.47); +#53878 = AXIS2_PLACEMENT_3D('',#53879,#53880,#53881); +#53879 = CARTESIAN_POINT('',(2.936751063167,1.15005,0.47)); +#53880 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53881 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#53882 = ORIENTED_EDGE('',*,*,#53883,.T.); +#53883 = EDGE_CURVE('',#53875,#53884,#53886,.T.); +#53884 = VERTEX_POINT('',#53885); +#53885 = CARTESIAN_POINT('',(3.5,1.15005,-1.665334536938E-16)); +#53886 = LINE('',#53887,#53888); +#53887 = CARTESIAN_POINT('',(2.936751063167,1.15005,-1.665334536938E-16) + ); +#53888 = VECTOR('',#53889,1.); +#53889 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53890 = ORIENTED_EDGE('',*,*,#53891,.T.); +#53891 = EDGE_CURVE('',#53884,#53892,#53894,.T.); +#53892 = VERTEX_POINT('',#53893); +#53893 = CARTESIAN_POINT('',(3.5,1.15005,0.27)); +#53894 = LINE('',#53895,#53896); +#53895 = CARTESIAN_POINT('',(3.5,1.15005,-1.665334536938E-16)); +#53896 = VECTOR('',#53897,1.); +#53897 = DIRECTION('',(0.,0.,1.)); +#53898 = ORIENTED_EDGE('',*,*,#53899,.T.); +#53899 = EDGE_CURVE('',#53892,#53900,#53902,.T.); +#53900 = VERTEX_POINT('',#53901); +#53901 = CARTESIAN_POINT('',(2.936751063167,1.15005,0.27)); +#53902 = LINE('',#53903,#53904); +#53903 = CARTESIAN_POINT('',(3.5,1.15005,0.27)); +#53904 = VECTOR('',#53905,1.); +#53905 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53906 = ORIENTED_EDGE('',*,*,#53907,.T.); +#53907 = EDGE_CURVE('',#53900,#53908,#53910,.T.); +#53908 = VERTEX_POINT('',#53909); +#53909 = CARTESIAN_POINT('',(2.739789512565,1.15005,0.435270364467)); +#53910 = CIRCLE('',#53911,0.2); +#53911 = AXIS2_PLACEMENT_3D('',#53912,#53913,#53914); +#53912 = CARTESIAN_POINT('',(2.936751063167,1.15005,0.47)); +#53913 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53914 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#53915 = ORIENTED_EDGE('',*,*,#53916,.T.); +#53916 = EDGE_CURVE('',#53908,#53917,#53919,.T.); +#53917 = VERTEX_POINT('',#53918); +#53918 = CARTESIAN_POINT('',(2.712859643916,1.15005,0.646614643503)); +#53919 = LINE('',#53920,#53921); +#53920 = CARTESIAN_POINT('',(2.739789512565,1.15005,0.435270364467)); +#53921 = VECTOR('',#53922,1.); +#53922 = DIRECTION('',(-0.126399799104,-1.403319672733E-17, + 0.991979380222)); +#53923 = ORIENTED_EDGE('',*,*,#53924,.T.); +#53924 = EDGE_CURVE('',#53917,#53170,#53925,.T.); +#53925 = CIRCLE('',#53926,0.47); +#53926 = AXIS2_PLACEMENT_3D('',#53927,#53928,#53929); +#53927 = CARTESIAN_POINT('',(2.25,1.15005,0.565)); +#53928 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53929 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#53930 = ORIENTED_EDGE('',*,*,#53191,.T.); +#53931 = PLANE('',#53932); +#53932 = AXIS2_PLACEMENT_3D('',#53933,#53934,#53935); +#53933 = CARTESIAN_POINT('',(2.606989201797,1.15005,0.512419776725)); +#53934 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53935 = DIRECTION('',(0.,0.,1.)); +#53936 = ADVANCED_FACE('',(#53937),#53948,.F.); +#53937 = FACE_BOUND('',#53938,.F.); +#53938 = EDGE_LOOP('',(#53939,#53940,#53946,#53947)); +#53939 = ORIENTED_EDGE('',*,*,#53772,.T.); +#53940 = ORIENTED_EDGE('',*,*,#53941,.F.); +#53941 = EDGE_CURVE('',#53858,#53773,#53942,.T.); +#53942 = LINE('',#53943,#53944); +#53943 = CARTESIAN_POINT('',(2.446961550602,1.15005,0.599729635533)); +#53944 = VECTOR('',#53945,1.); +#53945 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53946 = ORIENTED_EDGE('',*,*,#53857,.F.); +#53947 = ORIENTED_EDGE('',*,*,#53128,.T.); +#53948 = CYLINDRICAL_SURFACE('',#53949,0.2); +#53949 = AXIS2_PLACEMENT_3D('',#53950,#53951,#53952); +#53950 = CARTESIAN_POINT('',(2.25,-0.38335,0.565)); +#53951 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53952 = DIRECTION('',(0.,0.,1.)); +#53953 = ADVANCED_FACE('',(#53954),#53965,.T.); +#53954 = FACE_BOUND('',#53955,.T.); +#53955 = EDGE_LOOP('',(#53956,#53962,#53963,#53964)); +#53956 = ORIENTED_EDGE('',*,*,#53957,.F.); +#53957 = EDGE_CURVE('',#53917,#53832,#53958,.T.); +#53958 = LINE('',#53959,#53960); +#53959 = CARTESIAN_POINT('',(2.712859643916,1.15005,0.646614643503)); +#53960 = VECTOR('',#53961,1.); +#53961 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53962 = ORIENTED_EDGE('',*,*,#53924,.T.); +#53963 = ORIENTED_EDGE('',*,*,#53167,.F.); +#53964 = ORIENTED_EDGE('',*,*,#53839,.F.); +#53965 = CYLINDRICAL_SURFACE('',#53966,0.47); +#53966 = AXIS2_PLACEMENT_3D('',#53967,#53968,#53969); +#53967 = CARTESIAN_POINT('',(2.25,-0.38335,0.565)); +#53968 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53969 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#53970 = ADVANCED_FACE('',(#53971,#53977),#53988,.F.); +#53971 = FACE_BOUND('',#53972,.F.); +#53972 = EDGE_LOOP('',(#53973,#53974,#53975,#53976)); +#53973 = ORIENTED_EDGE('',*,*,#53288,.F.); +#53974 = ORIENTED_EDGE('',*,*,#53244,.F.); +#53975 = ORIENTED_EDGE('',*,*,#53215,.F.); +#53976 = ORIENTED_EDGE('',*,*,#53755,.F.); +#53977 = FACE_BOUND('',#53978,.F.); +#53978 = EDGE_LOOP('',(#53979)); +#53979 = ORIENTED_EDGE('',*,*,#53980,.F.); +#53980 = EDGE_CURVE('',#53981,#53981,#53983,.T.); +#53981 = VERTEX_POINT('',#53982); +#53982 = CARTESIAN_POINT('',(-1.441540344923,2.891540344923,1.7)); +#53983 = CIRCLE('',#53984,5.E-02); +#53984 = AXIS2_PLACEMENT_3D('',#53985,#53986,#53987); +#53985 = CARTESIAN_POINT('',(-1.441540344923,2.941540344923,1.7)); +#53986 = DIRECTION('',(0.,-0.,-1.)); +#53987 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53988 = PLANE('',#53989); +#53989 = AXIS2_PLACEMENT_3D('',#53990,#53991,#53992); +#53990 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#53991 = DIRECTION('',(0.,0.,-1.)); +#53992 = DIRECTION('',(0.463114948424,-0.886298225512,0.)); +#53993 = ADVANCED_FACE('',(#53994),#54005,.F.); +#53994 = FACE_BOUND('',#53995,.F.); +#53995 = EDGE_LOOP('',(#53996,#53997,#53998,#53999)); +#53996 = ORIENTED_EDGE('',*,*,#53831,.T.); +#53997 = ORIENTED_EDGE('',*,*,#53957,.F.); +#53998 = ORIENTED_EDGE('',*,*,#53916,.F.); +#53999 = ORIENTED_EDGE('',*,*,#54000,.T.); +#54000 = EDGE_CURVE('',#53908,#53823,#54001,.T.); +#54001 = LINE('',#54002,#54003); +#54002 = CARTESIAN_POINT('',(2.739789512565,1.15005,0.435270364467)); +#54003 = VECTOR('',#54004,1.); +#54004 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54005 = PLANE('',#54006); +#54006 = AXIS2_PLACEMENT_3D('',#54007,#54008,#54009); +#54007 = CARTESIAN_POINT('',(2.739789512565,-0.38335,0.435270364467)); +#54008 = DIRECTION('',(-0.991979380222,-1.101318347876E-16, + -0.126399799104)); +#54009 = DIRECTION('',(-0.126399799104,-1.403319672733E-17, + 0.991979380222)); +#54010 = ADVANCED_FACE('',(#54011),#54022,.F.); +#54011 = FACE_BOUND('',#54012,.F.); +#54012 = EDGE_LOOP('',(#54013,#54014,#54015,#54016)); +#54013 = ORIENTED_EDGE('',*,*,#53822,.T.); +#54014 = ORIENTED_EDGE('',*,*,#54000,.F.); +#54015 = ORIENTED_EDGE('',*,*,#53907,.F.); +#54016 = ORIENTED_EDGE('',*,*,#54017,.T.); +#54017 = EDGE_CURVE('',#53900,#53815,#54018,.T.); +#54018 = LINE('',#54019,#54020); +#54019 = CARTESIAN_POINT('',(2.936751063167,1.15005,0.27)); +#54020 = VECTOR('',#54021,1.); +#54021 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54022 = CYLINDRICAL_SURFACE('',#54023,0.2); +#54023 = AXIS2_PLACEMENT_3D('',#54024,#54025,#54026); +#54024 = CARTESIAN_POINT('',(2.936751063167,-0.38335,0.47)); +#54025 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54026 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#54027 = ADVANCED_FACE('',(#54028),#54039,.F.); +#54028 = FACE_BOUND('',#54029,.F.); +#54029 = EDGE_LOOP('',(#54030,#54031,#54032,#54033)); +#54030 = ORIENTED_EDGE('',*,*,#53814,.T.); +#54031 = ORIENTED_EDGE('',*,*,#54017,.F.); +#54032 = ORIENTED_EDGE('',*,*,#53899,.F.); +#54033 = ORIENTED_EDGE('',*,*,#54034,.T.); +#54034 = EDGE_CURVE('',#53892,#53807,#54035,.T.); +#54035 = LINE('',#54036,#54037); +#54036 = CARTESIAN_POINT('',(3.5,1.15005,0.27)); +#54037 = VECTOR('',#54038,1.); +#54038 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54039 = PLANE('',#54040); +#54040 = AXIS2_PLACEMENT_3D('',#54041,#54042,#54043); +#54041 = CARTESIAN_POINT('',(3.5,-0.38335,0.27)); +#54042 = DIRECTION('',(0.,0.,-1.)); +#54043 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#54044 = ADVANCED_FACE('',(#54045),#54056,.F.); +#54045 = FACE_BOUND('',#54046,.F.); +#54046 = EDGE_LOOP('',(#54047,#54048,#54049,#54050)); +#54047 = ORIENTED_EDGE('',*,*,#53806,.T.); +#54048 = ORIENTED_EDGE('',*,*,#54034,.F.); +#54049 = ORIENTED_EDGE('',*,*,#53891,.F.); +#54050 = ORIENTED_EDGE('',*,*,#54051,.T.); +#54051 = EDGE_CURVE('',#53884,#53799,#54052,.T.); +#54052 = LINE('',#54053,#54054); +#54053 = CARTESIAN_POINT('',(3.5,1.15005,-1.665334536938E-16)); +#54054 = VECTOR('',#54055,1.); +#54055 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54056 = PLANE('',#54057); +#54057 = AXIS2_PLACEMENT_3D('',#54058,#54059,#54060); +#54058 = CARTESIAN_POINT('',(3.5,-0.38335,-1.665334536938E-16)); +#54059 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54060 = DIRECTION('',(0.,0.,1.)); +#54061 = ADVANCED_FACE('',(#54062),#54073,.F.); +#54062 = FACE_BOUND('',#54063,.F.); +#54063 = EDGE_LOOP('',(#54064,#54065,#54066,#54067)); +#54064 = ORIENTED_EDGE('',*,*,#53798,.T.); +#54065 = ORIENTED_EDGE('',*,*,#54051,.F.); +#54066 = ORIENTED_EDGE('',*,*,#53883,.F.); +#54067 = ORIENTED_EDGE('',*,*,#54068,.T.); +#54068 = EDGE_CURVE('',#53875,#53790,#54069,.T.); +#54069 = LINE('',#54070,#54071); +#54070 = CARTESIAN_POINT('',(2.936751063167,1.15005,-1.665334536938E-16) + ); +#54071 = VECTOR('',#54072,1.); +#54072 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54073 = PLANE('',#54074); +#54074 = AXIS2_PLACEMENT_3D('',#54075,#54076,#54077); +#54075 = CARTESIAN_POINT('',(2.936751063167,-0.38335,-1.665334536938E-16 + )); +#54076 = DIRECTION('',(0.,0.,1.)); +#54077 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#54078 = ADVANCED_FACE('',(#54079),#54090,.T.); +#54079 = FACE_BOUND('',#54080,.T.); +#54080 = EDGE_LOOP('',(#54081,#54087,#54088,#54089)); +#54081 = ORIENTED_EDGE('',*,*,#54082,.F.); +#54082 = EDGE_CURVE('',#53867,#53782,#54083,.T.); +#54083 = LINE('',#54084,#54085); +#54084 = CARTESIAN_POINT('',(2.473891419252,1.15005,0.388385356497)); +#54085 = VECTOR('',#54086,1.); +#54086 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54087 = ORIENTED_EDGE('',*,*,#53874,.T.); +#54088 = ORIENTED_EDGE('',*,*,#54068,.T.); +#54089 = ORIENTED_EDGE('',*,*,#53789,.F.); +#54090 = CYLINDRICAL_SURFACE('',#54091,0.47); +#54091 = AXIS2_PLACEMENT_3D('',#54092,#54093,#54094); +#54092 = CARTESIAN_POINT('',(2.936751063167,-0.38335,0.47)); +#54093 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54094 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#54095 = ADVANCED_FACE('',(#54096),#54102,.F.); +#54096 = FACE_BOUND('',#54097,.F.); +#54097 = EDGE_LOOP('',(#54098,#54099,#54100,#54101)); +#54098 = ORIENTED_EDGE('',*,*,#53781,.T.); +#54099 = ORIENTED_EDGE('',*,*,#54082,.F.); +#54100 = ORIENTED_EDGE('',*,*,#53866,.F.); +#54101 = ORIENTED_EDGE('',*,*,#53941,.T.); +#54102 = PLANE('',#54103); +#54103 = AXIS2_PLACEMENT_3D('',#54104,#54105,#54106); +#54104 = CARTESIAN_POINT('',(2.446961550602,-0.38335,0.599729635533)); +#54105 = DIRECTION('',(0.991979380222,1.101318347876E-16,0.126399799104) + ); +#54106 = DIRECTION('',(0.126399799104,1.403319672733E-17,-0.991979380222 + )); +#54107 = ADVANCED_FACE('',(#54108),#54109,.F.); +#54108 = FACE_BOUND('',#53978,.T.); +#54109 = PLANE('',#54110); +#54110 = AXIS2_PLACEMENT_3D('',#54111,#54112,#54113); +#54111 = CARTESIAN_POINT('',(-1.441540344923,2.941540344923,1.7)); +#54112 = DIRECTION('',(0.,0.,-1.)); +#54113 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#54118)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#54115,#54116,#54117)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#54115 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#54116 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#54117 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#54118 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#54115, + 'distance_accuracy_value','confusion accuracy'); +#54119 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#54120,#54122); +#54120 = ( REPRESENTATION_RELATIONSHIP('','',#51861,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#54121) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#54121 = ITEM_DEFINED_TRANSFORMATION('','',#11,#199); +#54122 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #54123); +#54123 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('47','U3','',#5,#51856,$); +#54124 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#51858)); +#54125 = SHAPE_DEFINITION_REPRESENTATION(#54126,#54132); +#54126 = PRODUCT_DEFINITION_SHAPE('','',#54127); +#54127 = PRODUCT_DEFINITION('design','',#54128,#54131); +#54128 = PRODUCT_DEFINITION_FORMATION('','',#54129); +#54129 = PRODUCT('SOT-23-5','SOT-23-5','',(#54130)); +#54130 = PRODUCT_CONTEXT('',#2,'mechanical'); +#54131 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#54132 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#54133),#57202); +#54133 = MANIFOLD_SOLID_BREP('',#54134); +#54134 = CLOSED_SHELL('',(#54135,#54173,#54236,#54259,#54288,#54311, + #54382,#54437,#54460,#54483,#54500,#54523,#54611,#54627,#54657, + #54688,#54719,#54750,#54781,#54812,#54829,#54846,#54877,#54908, + #54939,#54969,#54992,#55015,#55032,#55077,#55147,#55170,#55193, + #55216,#55271,#55309,#55358,#55450,#55475,#55559,#55581,#55673, + #55698,#55782,#55799,#55884,#55909,#55986,#56071,#56096,#56173, + #56190,#56282,#56307,#56391,#56408,#56427,#56446,#56492,#56508, + #56527,#56543,#56560,#56572,#56589,#56606,#56623,#56640,#56657, + #56674,#56691,#56703,#56720,#56737,#56754,#56771,#56788,#56805, + #56822,#56834,#56851,#56868,#56885,#56902,#56919,#56936,#56948, + #56965,#56982,#56999,#57016,#57033,#57050,#57062,#57079,#57096, + #57113,#57130,#57147,#57164,#57181,#57193)); +#54135 = ADVANCED_FACE('',(#54136),#54168,.F.); +#54136 = FACE_BOUND('',#54137,.F.); +#54137 = EDGE_LOOP('',(#54138,#54148,#54155,#54163)); +#54138 = ORIENTED_EDGE('',*,*,#54139,.T.); +#54139 = EDGE_CURVE('',#54140,#54142,#54144,.T.); +#54140 = VERTEX_POINT('',#54141); +#54141 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#54142 = VERTEX_POINT('',#54143); +#54143 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#54144 = LINE('',#54145,#54146); +#54145 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#54146 = VECTOR('',#54147,1.); +#54147 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54148 = ORIENTED_EDGE('',*,*,#54149,.T.); +#54149 = EDGE_CURVE('',#54142,#54150,#54152,.T.); +#54150 = VERTEX_POINT('',#54151); +#54151 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#54152 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54153,#54154),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54153 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#54154 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#54155 = ORIENTED_EDGE('',*,*,#54156,.F.); +#54156 = EDGE_CURVE('',#54157,#54150,#54159,.T.); +#54157 = VERTEX_POINT('',#54158); +#54158 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#54159 = LINE('',#54160,#54161); +#54160 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#54161 = VECTOR('',#54162,1.); +#54162 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54163 = ORIENTED_EDGE('',*,*,#54164,.F.); +#54164 = EDGE_CURVE('',#54140,#54157,#54165,.T.); +#54165 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54166,#54167),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54166 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#54167 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#54168 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54169,#54170) + ,(#54171,#54172 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#54169 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#54170 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#54171 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#54172 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#54173 = ADVANCED_FACE('',(#54174),#54231,.F.); +#54174 = FACE_BOUND('',#54175,.T.); +#54175 = EDGE_LOOP('',(#54176,#54177,#54185,#54193,#54201,#54209,#54217, + #54225)); +#54176 = ORIENTED_EDGE('',*,*,#54139,.T.); +#54177 = ORIENTED_EDGE('',*,*,#54178,.T.); +#54178 = EDGE_CURVE('',#54142,#54179,#54181,.T.); +#54179 = VERTEX_POINT('',#54180); +#54180 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#54181 = LINE('',#54182,#54183); +#54182 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#54183 = VECTOR('',#54184,1.); +#54184 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54185 = ORIENTED_EDGE('',*,*,#54186,.T.); +#54186 = EDGE_CURVE('',#54179,#54187,#54189,.T.); +#54187 = VERTEX_POINT('',#54188); +#54188 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#54189 = LINE('',#54190,#54191); +#54190 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#54191 = VECTOR('',#54192,1.); +#54192 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54193 = ORIENTED_EDGE('',*,*,#54194,.T.); +#54194 = EDGE_CURVE('',#54187,#54195,#54197,.T.); +#54195 = VERTEX_POINT('',#54196); +#54196 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#54197 = LINE('',#54198,#54199); +#54198 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#54199 = VECTOR('',#54200,1.); +#54200 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54201 = ORIENTED_EDGE('',*,*,#54202,.T.); +#54202 = EDGE_CURVE('',#54195,#54203,#54205,.T.); +#54203 = VERTEX_POINT('',#54204); +#54204 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#54205 = LINE('',#54206,#54207); +#54206 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#54207 = VECTOR('',#54208,1.); +#54208 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54209 = ORIENTED_EDGE('',*,*,#54210,.T.); +#54210 = EDGE_CURVE('',#54203,#54211,#54213,.T.); +#54211 = VERTEX_POINT('',#54212); +#54212 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#54213 = LINE('',#54214,#54215); +#54214 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#54215 = VECTOR('',#54216,1.); +#54216 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54217 = ORIENTED_EDGE('',*,*,#54218,.T.); +#54218 = EDGE_CURVE('',#54211,#54219,#54221,.T.); +#54219 = VERTEX_POINT('',#54220); +#54220 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#54221 = LINE('',#54222,#54223); +#54222 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#54223 = VECTOR('',#54224,1.); +#54224 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54225 = ORIENTED_EDGE('',*,*,#54226,.T.); +#54226 = EDGE_CURVE('',#54219,#54140,#54227,.T.); +#54227 = LINE('',#54228,#54229); +#54228 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#54229 = VECTOR('',#54230,1.); +#54230 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54231 = PLANE('',#54232); +#54232 = AXIS2_PLACEMENT_3D('',#54233,#54234,#54235); +#54233 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#54234 = DIRECTION('',(0.,0.,1.)); +#54235 = DIRECTION('',(0.436587433964,-0.899661832304,0.)); +#54236 = ADVANCED_FACE('',(#54237),#54254,.F.); +#54237 = FACE_BOUND('',#54238,.F.); +#54238 = EDGE_LOOP('',(#54239,#54240,#54247,#54253)); +#54239 = ORIENTED_EDGE('',*,*,#54178,.T.); +#54240 = ORIENTED_EDGE('',*,*,#54241,.T.); +#54241 = EDGE_CURVE('',#54179,#54242,#54244,.T.); +#54242 = VERTEX_POINT('',#54243); +#54243 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54244 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54245,#54246),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54245 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#54246 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54247 = ORIENTED_EDGE('',*,*,#54248,.F.); +#54248 = EDGE_CURVE('',#54150,#54242,#54249,.T.); +#54249 = LINE('',#54250,#54251); +#54250 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#54251 = VECTOR('',#54252,1.); +#54252 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54253 = ORIENTED_EDGE('',*,*,#54149,.F.); +#54254 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54255,#54256) + ,(#54257,#54258 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#54255 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#54256 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#54257 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#54258 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54259 = ADVANCED_FACE('',(#54260),#54283,.F.); +#54260 = FACE_BOUND('',#54261,.F.); +#54261 = EDGE_LOOP('',(#54262,#54263,#54270,#54278)); +#54262 = ORIENTED_EDGE('',*,*,#54156,.T.); +#54263 = ORIENTED_EDGE('',*,*,#54264,.T.); +#54264 = EDGE_CURVE('',#54150,#54265,#54267,.T.); +#54265 = VERTEX_POINT('',#54266); +#54266 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#54267 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54268,#54269),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54268 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#54269 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#54270 = ORIENTED_EDGE('',*,*,#54271,.F.); +#54271 = EDGE_CURVE('',#54272,#54265,#54274,.T.); +#54272 = VERTEX_POINT('',#54273); +#54273 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#54274 = LINE('',#54275,#54276); +#54275 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#54276 = VECTOR('',#54277,1.); +#54277 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54278 = ORIENTED_EDGE('',*,*,#54279,.F.); +#54279 = EDGE_CURVE('',#54157,#54272,#54280,.T.); +#54280 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54281,#54282),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54281 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#54282 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#54283 = PLANE('',#54284); +#54284 = AXIS2_PLACEMENT_3D('',#54285,#54286,#54287); +#54285 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#54286 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54287 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54288 = ADVANCED_FACE('',(#54289),#54306,.F.); +#54289 = FACE_BOUND('',#54290,.F.); +#54290 = EDGE_LOOP('',(#54291,#54292,#54293,#54301)); +#54291 = ORIENTED_EDGE('',*,*,#54226,.T.); +#54292 = ORIENTED_EDGE('',*,*,#54164,.T.); +#54293 = ORIENTED_EDGE('',*,*,#54294,.F.); +#54294 = EDGE_CURVE('',#54295,#54157,#54297,.T.); +#54295 = VERTEX_POINT('',#54296); +#54296 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#54297 = LINE('',#54298,#54299); +#54298 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#54299 = VECTOR('',#54300,1.); +#54300 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54301 = ORIENTED_EDGE('',*,*,#54302,.F.); +#54302 = EDGE_CURVE('',#54219,#54295,#54303,.T.); +#54303 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54304,#54305),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54304 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#54305 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#54306 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54307,#54308) + ,(#54309,#54310 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#54307 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#54308 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#54309 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#54310 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#54311 = ADVANCED_FACE('',(#54312),#54377,.F.); +#54312 = FACE_BOUND('',#54313,.F.); +#54313 = EDGE_LOOP('',(#54314,#54315,#54316,#54324,#54332,#54340,#54348, + #54356,#54364,#54372)); +#54314 = ORIENTED_EDGE('',*,*,#54218,.T.); +#54315 = ORIENTED_EDGE('',*,*,#54302,.T.); +#54316 = ORIENTED_EDGE('',*,*,#54317,.F.); +#54317 = EDGE_CURVE('',#54318,#54295,#54320,.T.); +#54318 = VERTEX_POINT('',#54319); +#54319 = CARTESIAN_POINT('',(-0.8,1.2,0.75)); +#54320 = LINE('',#54321,#54322); +#54321 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54322 = VECTOR('',#54323,1.); +#54323 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54324 = ORIENTED_EDGE('',*,*,#54325,.F.); +#54325 = EDGE_CURVE('',#54326,#54318,#54328,.T.); +#54326 = VERTEX_POINT('',#54327); +#54327 = CARTESIAN_POINT('',(-0.8,0.7,0.75)); +#54328 = LINE('',#54329,#54330); +#54329 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54330 = VECTOR('',#54331,1.); +#54331 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54332 = ORIENTED_EDGE('',*,*,#54333,.F.); +#54333 = EDGE_CURVE('',#54334,#54326,#54336,.T.); +#54334 = VERTEX_POINT('',#54335); +#54335 = CARTESIAN_POINT('',(-0.8,0.25,0.75)); +#54336 = LINE('',#54337,#54338); +#54337 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54338 = VECTOR('',#54339,1.); +#54339 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54340 = ORIENTED_EDGE('',*,*,#54341,.F.); +#54341 = EDGE_CURVE('',#54342,#54334,#54344,.T.); +#54342 = VERTEX_POINT('',#54343); +#54343 = CARTESIAN_POINT('',(-0.8,-0.25,0.75)); +#54344 = LINE('',#54345,#54346); +#54345 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54346 = VECTOR('',#54347,1.); +#54347 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54348 = ORIENTED_EDGE('',*,*,#54349,.F.); +#54349 = EDGE_CURVE('',#54350,#54342,#54352,.T.); +#54350 = VERTEX_POINT('',#54351); +#54351 = CARTESIAN_POINT('',(-0.8,-0.7,0.75)); +#54352 = LINE('',#54353,#54354); +#54353 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54354 = VECTOR('',#54355,1.); +#54355 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54356 = ORIENTED_EDGE('',*,*,#54357,.F.); +#54357 = EDGE_CURVE('',#54358,#54350,#54360,.T.); +#54358 = VERTEX_POINT('',#54359); +#54359 = CARTESIAN_POINT('',(-0.8,-1.2,0.75)); +#54360 = LINE('',#54361,#54362); +#54361 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54362 = VECTOR('',#54363,1.); +#54363 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54364 = ORIENTED_EDGE('',*,*,#54365,.F.); +#54365 = EDGE_CURVE('',#54366,#54358,#54368,.T.); +#54366 = VERTEX_POINT('',#54367); +#54367 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54368 = LINE('',#54369,#54370); +#54369 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54370 = VECTOR('',#54371,1.); +#54371 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54372 = ORIENTED_EDGE('',*,*,#54373,.F.); +#54373 = EDGE_CURVE('',#54211,#54366,#54374,.T.); +#54374 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54375,#54376),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54375 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#54376 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54377 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54378,#54379) + ,(#54380,#54381 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#54378 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#54379 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54380 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#54381 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#54382 = ADVANCED_FACE('',(#54383),#54432,.F.); +#54383 = FACE_BOUND('',#54384,.F.); +#54384 = EDGE_LOOP('',(#54385,#54386,#54393,#54401,#54409,#54417,#54425, + #54431)); +#54385 = ORIENTED_EDGE('',*,*,#54186,.T.); +#54386 = ORIENTED_EDGE('',*,*,#54387,.T.); +#54387 = EDGE_CURVE('',#54187,#54388,#54390,.T.); +#54388 = VERTEX_POINT('',#54389); +#54389 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#54390 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54391,#54392),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54391 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#54392 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#54393 = ORIENTED_EDGE('',*,*,#54394,.F.); +#54394 = EDGE_CURVE('',#54395,#54388,#54397,.T.); +#54395 = VERTEX_POINT('',#54396); +#54396 = CARTESIAN_POINT('',(0.8,-1.2,0.75)); +#54397 = LINE('',#54398,#54399); +#54398 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54399 = VECTOR('',#54400,1.); +#54400 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54401 = ORIENTED_EDGE('',*,*,#54402,.F.); +#54402 = EDGE_CURVE('',#54403,#54395,#54405,.T.); +#54403 = VERTEX_POINT('',#54404); +#54404 = CARTESIAN_POINT('',(0.8,-0.7,0.75)); +#54405 = LINE('',#54406,#54407); +#54406 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54407 = VECTOR('',#54408,1.); +#54408 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54409 = ORIENTED_EDGE('',*,*,#54410,.F.); +#54410 = EDGE_CURVE('',#54411,#54403,#54413,.T.); +#54411 = VERTEX_POINT('',#54412); +#54412 = CARTESIAN_POINT('',(0.8,0.7,0.75)); +#54413 = LINE('',#54414,#54415); +#54414 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54415 = VECTOR('',#54416,1.); +#54416 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54417 = ORIENTED_EDGE('',*,*,#54418,.F.); +#54418 = EDGE_CURVE('',#54419,#54411,#54421,.T.); +#54419 = VERTEX_POINT('',#54420); +#54420 = CARTESIAN_POINT('',(0.8,1.2,0.75)); +#54421 = LINE('',#54422,#54423); +#54422 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54423 = VECTOR('',#54424,1.); +#54424 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54425 = ORIENTED_EDGE('',*,*,#54426,.F.); +#54426 = EDGE_CURVE('',#54242,#54419,#54427,.T.); +#54427 = LINE('',#54428,#54429); +#54428 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54429 = VECTOR('',#54430,1.); +#54430 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54431 = ORIENTED_EDGE('',*,*,#54241,.F.); +#54432 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54433,#54434) + ,(#54435,#54436 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#54433 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#54434 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54435 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#54436 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#54437 = ADVANCED_FACE('',(#54438),#54455,.F.); +#54438 = FACE_BOUND('',#54439,.F.); +#54439 = EDGE_LOOP('',(#54440,#54441,#54442,#54450)); +#54440 = ORIENTED_EDGE('',*,*,#54210,.T.); +#54441 = ORIENTED_EDGE('',*,*,#54373,.T.); +#54442 = ORIENTED_EDGE('',*,*,#54443,.F.); +#54443 = EDGE_CURVE('',#54444,#54366,#54446,.T.); +#54444 = VERTEX_POINT('',#54445); +#54445 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#54446 = LINE('',#54447,#54448); +#54447 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#54448 = VECTOR('',#54449,1.); +#54449 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54450 = ORIENTED_EDGE('',*,*,#54451,.F.); +#54451 = EDGE_CURVE('',#54203,#54444,#54452,.T.); +#54452 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54453,#54454),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54453 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#54454 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#54455 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54456,#54457) + ,(#54458,#54459 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#54456 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#54457 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#54458 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#54459 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54460 = ADVANCED_FACE('',(#54461),#54478,.F.); +#54461 = FACE_BOUND('',#54462,.F.); +#54462 = EDGE_LOOP('',(#54463,#54464,#54471,#54477)); +#54463 = ORIENTED_EDGE('',*,*,#54194,.T.); +#54464 = ORIENTED_EDGE('',*,*,#54465,.T.); +#54465 = EDGE_CURVE('',#54195,#54466,#54468,.T.); +#54466 = VERTEX_POINT('',#54467); +#54467 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#54468 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54469,#54470),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54469 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#54470 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#54471 = ORIENTED_EDGE('',*,*,#54472,.F.); +#54472 = EDGE_CURVE('',#54388,#54466,#54473,.T.); +#54473 = LINE('',#54474,#54475); +#54474 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#54475 = VECTOR('',#54476,1.); +#54476 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54477 = ORIENTED_EDGE('',*,*,#54387,.F.); +#54478 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54479,#54480) + ,(#54481,#54482 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#54479 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#54480 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#54481 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#54482 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#54483 = ADVANCED_FACE('',(#54484),#54495,.F.); +#54484 = FACE_BOUND('',#54485,.F.); +#54485 = EDGE_LOOP('',(#54486,#54487,#54488,#54494)); +#54486 = ORIENTED_EDGE('',*,*,#54202,.T.); +#54487 = ORIENTED_EDGE('',*,*,#54451,.T.); +#54488 = ORIENTED_EDGE('',*,*,#54489,.F.); +#54489 = EDGE_CURVE('',#54466,#54444,#54490,.T.); +#54490 = LINE('',#54491,#54492); +#54491 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#54492 = VECTOR('',#54493,1.); +#54493 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54494 = ORIENTED_EDGE('',*,*,#54465,.F.); +#54495 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54496,#54497) + ,(#54498,#54499 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#54496 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#54497 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#54498 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#54499 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#54500 = ADVANCED_FACE('',(#54501),#54518,.F.); +#54501 = FACE_BOUND('',#54502,.F.); +#54502 = EDGE_LOOP('',(#54503,#54504,#54511,#54517)); +#54503 = ORIENTED_EDGE('',*,*,#54248,.T.); +#54504 = ORIENTED_EDGE('',*,*,#54505,.T.); +#54505 = EDGE_CURVE('',#54242,#54506,#54508,.T.); +#54506 = VERTEX_POINT('',#54507); +#54507 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#54508 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54509,#54510),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54509 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#54510 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#54511 = ORIENTED_EDGE('',*,*,#54512,.F.); +#54512 = EDGE_CURVE('',#54265,#54506,#54513,.T.); +#54513 = LINE('',#54514,#54515); +#54514 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#54515 = VECTOR('',#54516,1.); +#54516 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54517 = ORIENTED_EDGE('',*,*,#54264,.F.); +#54518 = PLANE('',#54519); +#54519 = AXIS2_PLACEMENT_3D('',#54520,#54521,#54522); +#54520 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#54521 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#54522 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54523 = ADVANCED_FACE('',(#54524),#54606,.F.); +#54524 = FACE_BOUND('',#54525,.F.); +#54525 = EDGE_LOOP('',(#54526,#54534,#54535,#54536,#54544,#54552,#54560, + #54568,#54576,#54584,#54592,#54600)); +#54526 = ORIENTED_EDGE('',*,*,#54527,.T.); +#54527 = EDGE_CURVE('',#54528,#54272,#54530,.T.); +#54528 = VERTEX_POINT('',#54529); +#54529 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#54530 = LINE('',#54531,#54532); +#54531 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#54532 = VECTOR('',#54533,1.); +#54533 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54534 = ORIENTED_EDGE('',*,*,#54271,.T.); +#54535 = ORIENTED_EDGE('',*,*,#54512,.T.); +#54536 = ORIENTED_EDGE('',*,*,#54537,.T.); +#54537 = EDGE_CURVE('',#54506,#54538,#54540,.T.); +#54538 = VERTEX_POINT('',#54539); +#54539 = CARTESIAN_POINT('',(0.8,1.2,0.9)); +#54540 = LINE('',#54541,#54542); +#54541 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#54542 = VECTOR('',#54543,1.); +#54543 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54544 = ORIENTED_EDGE('',*,*,#54545,.T.); +#54545 = EDGE_CURVE('',#54538,#54546,#54548,.T.); +#54546 = VERTEX_POINT('',#54547); +#54547 = CARTESIAN_POINT('',(0.775,1.2,0.9)); +#54548 = LINE('',#54549,#54550); +#54549 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#54550 = VECTOR('',#54551,1.); +#54551 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54552 = ORIENTED_EDGE('',*,*,#54553,.F.); +#54553 = EDGE_CURVE('',#54554,#54546,#54556,.T.); +#54554 = VERTEX_POINT('',#54555); +#54555 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#54556 = LINE('',#54557,#54558); +#54557 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#54558 = VECTOR('',#54559,1.); +#54559 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54560 = ORIENTED_EDGE('',*,*,#54561,.F.); +#54561 = EDGE_CURVE('',#54562,#54554,#54564,.T.); +#54562 = VERTEX_POINT('',#54563); +#54563 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#54564 = LINE('',#54565,#54566); +#54565 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#54566 = VECTOR('',#54567,1.); +#54567 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54568 = ORIENTED_EDGE('',*,*,#54569,.F.); +#54569 = EDGE_CURVE('',#54570,#54562,#54572,.T.); +#54570 = VERTEX_POINT('',#54571); +#54571 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#54572 = LINE('',#54573,#54574); +#54573 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#54574 = VECTOR('',#54575,1.); +#54575 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54576 = ORIENTED_EDGE('',*,*,#54577,.F.); +#54577 = EDGE_CURVE('',#54578,#54570,#54580,.T.); +#54578 = VERTEX_POINT('',#54579); +#54579 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#54580 = LINE('',#54581,#54582); +#54581 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#54582 = VECTOR('',#54583,1.); +#54583 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54584 = ORIENTED_EDGE('',*,*,#54585,.F.); +#54585 = EDGE_CURVE('',#54586,#54578,#54588,.T.); +#54586 = VERTEX_POINT('',#54587); +#54587 = CARTESIAN_POINT('',(-0.775,1.2,0.9)); +#54588 = LINE('',#54589,#54590); +#54589 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#54590 = VECTOR('',#54591,1.); +#54591 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54592 = ORIENTED_EDGE('',*,*,#54593,.F.); +#54593 = EDGE_CURVE('',#54594,#54586,#54596,.T.); +#54594 = VERTEX_POINT('',#54595); +#54595 = CARTESIAN_POINT('',(-0.8,1.2,0.9)); +#54596 = LINE('',#54597,#54598); +#54597 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#54598 = VECTOR('',#54599,1.); +#54599 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54600 = ORIENTED_EDGE('',*,*,#54601,.T.); +#54601 = EDGE_CURVE('',#54594,#54528,#54602,.T.); +#54602 = LINE('',#54603,#54604); +#54603 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54604 = VECTOR('',#54605,1.); +#54605 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54606 = PLANE('',#54607); +#54607 = AXIS2_PLACEMENT_3D('',#54608,#54609,#54610); +#54608 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#54609 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#54610 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#54611 = ADVANCED_FACE('',(#54612),#54622,.F.); +#54612 = FACE_BOUND('',#54613,.F.); +#54613 = EDGE_LOOP('',(#54614,#54615,#54616,#54617)); +#54614 = ORIENTED_EDGE('',*,*,#54294,.T.); +#54615 = ORIENTED_EDGE('',*,*,#54279,.T.); +#54616 = ORIENTED_EDGE('',*,*,#54527,.F.); +#54617 = ORIENTED_EDGE('',*,*,#54618,.F.); +#54618 = EDGE_CURVE('',#54295,#54528,#54619,.T.); +#54619 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54620,#54621),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54620 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#54621 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#54622 = PLANE('',#54623); +#54623 = AXIS2_PLACEMENT_3D('',#54624,#54625,#54626); +#54624 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#54625 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#54626 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54627 = ADVANCED_FACE('',(#54628),#54652,.F.); +#54628 = FACE_BOUND('',#54629,.F.); +#54629 = EDGE_LOOP('',(#54630,#54637,#54638,#54646)); +#54630 = ORIENTED_EDGE('',*,*,#54631,.F.); +#54631 = EDGE_CURVE('',#54366,#54632,#54634,.T.); +#54632 = VERTEX_POINT('',#54633); +#54633 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54634 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54635,#54636),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54635 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#54636 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54637 = ORIENTED_EDGE('',*,*,#54365,.T.); +#54638 = ORIENTED_EDGE('',*,*,#54639,.T.); +#54639 = EDGE_CURVE('',#54358,#54640,#54642,.T.); +#54640 = VERTEX_POINT('',#54641); +#54641 = CARTESIAN_POINT('',(-0.8,-1.2,0.9)); +#54642 = LINE('',#54643,#54644); +#54643 = CARTESIAN_POINT('',(-0.8,-1.2,0.670847817658)); +#54644 = VECTOR('',#54645,1.); +#54645 = DIRECTION('',(0.,0.,1.)); +#54646 = ORIENTED_EDGE('',*,*,#54647,.F.); +#54647 = EDGE_CURVE('',#54632,#54640,#54648,.T.); +#54648 = LINE('',#54649,#54650); +#54649 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54650 = VECTOR('',#54651,1.); +#54651 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54652 = PLANE('',#54653); +#54653 = AXIS2_PLACEMENT_3D('',#54654,#54655,#54656); +#54654 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54655 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54656 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54657 = ADVANCED_FACE('',(#54658),#54683,.F.); +#54658 = FACE_BOUND('',#54659,.F.); +#54659 = EDGE_LOOP('',(#54660,#54668,#54669,#54677)); +#54660 = ORIENTED_EDGE('',*,*,#54661,.F.); +#54661 = EDGE_CURVE('',#54358,#54662,#54664,.T.); +#54662 = VERTEX_POINT('',#54663); +#54663 = CARTESIAN_POINT('',(-0.85,-1.2,0.75)); +#54664 = LINE('',#54665,#54666); +#54665 = CARTESIAN_POINT('',(-0.75,-1.2,0.75)); +#54666 = VECTOR('',#54667,1.); +#54667 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54668 = ORIENTED_EDGE('',*,*,#54357,.T.); +#54669 = ORIENTED_EDGE('',*,*,#54670,.T.); +#54670 = EDGE_CURVE('',#54350,#54671,#54673,.T.); +#54671 = VERTEX_POINT('',#54672); +#54672 = CARTESIAN_POINT('',(-0.85,-0.7,0.75)); +#54673 = LINE('',#54674,#54675); +#54674 = CARTESIAN_POINT('',(-0.75,-0.7,0.75)); +#54675 = VECTOR('',#54676,1.); +#54676 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54677 = ORIENTED_EDGE('',*,*,#54678,.F.); +#54678 = EDGE_CURVE('',#54662,#54671,#54679,.T.); +#54679 = LINE('',#54680,#54681); +#54680 = CARTESIAN_POINT('',(-0.85,-1.2,0.75)); +#54681 = VECTOR('',#54682,1.); +#54682 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54683 = PLANE('',#54684); +#54684 = AXIS2_PLACEMENT_3D('',#54685,#54686,#54687); +#54685 = CARTESIAN_POINT('',(-0.75,-1.2,0.75)); +#54686 = DIRECTION('',(0.,0.,1.)); +#54687 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54688 = ADVANCED_FACE('',(#54689),#54714,.F.); +#54689 = FACE_BOUND('',#54690,.F.); +#54690 = EDGE_LOOP('',(#54691,#54699,#54700,#54708)); +#54691 = ORIENTED_EDGE('',*,*,#54692,.F.); +#54692 = EDGE_CURVE('',#54350,#54693,#54695,.T.); +#54693 = VERTEX_POINT('',#54694); +#54694 = CARTESIAN_POINT('',(-0.8,-0.7,0.9)); +#54695 = LINE('',#54696,#54697); +#54696 = CARTESIAN_POINT('',(-0.8,-0.7,0.670847817658)); +#54697 = VECTOR('',#54698,1.); +#54698 = DIRECTION('',(0.,0.,1.)); +#54699 = ORIENTED_EDGE('',*,*,#54349,.T.); +#54700 = ORIENTED_EDGE('',*,*,#54701,.T.); +#54701 = EDGE_CURVE('',#54342,#54702,#54704,.T.); +#54702 = VERTEX_POINT('',#54703); +#54703 = CARTESIAN_POINT('',(-0.8,-0.25,0.9)); +#54704 = LINE('',#54705,#54706); +#54705 = CARTESIAN_POINT('',(-0.8,-0.25,0.670847817658)); +#54706 = VECTOR('',#54707,1.); +#54707 = DIRECTION('',(0.,0.,1.)); +#54708 = ORIENTED_EDGE('',*,*,#54709,.F.); +#54709 = EDGE_CURVE('',#54693,#54702,#54710,.T.); +#54710 = LINE('',#54711,#54712); +#54711 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54712 = VECTOR('',#54713,1.); +#54713 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54714 = PLANE('',#54715); +#54715 = AXIS2_PLACEMENT_3D('',#54716,#54717,#54718); +#54716 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54717 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54718 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54719 = ADVANCED_FACE('',(#54720),#54745,.F.); +#54720 = FACE_BOUND('',#54721,.F.); +#54721 = EDGE_LOOP('',(#54722,#54730,#54731,#54739)); +#54722 = ORIENTED_EDGE('',*,*,#54723,.F.); +#54723 = EDGE_CURVE('',#54342,#54724,#54726,.T.); +#54724 = VERTEX_POINT('',#54725); +#54725 = CARTESIAN_POINT('',(-0.85,-0.25,0.75)); +#54726 = LINE('',#54727,#54728); +#54727 = CARTESIAN_POINT('',(-0.75,-0.25,0.75)); +#54728 = VECTOR('',#54729,1.); +#54729 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54730 = ORIENTED_EDGE('',*,*,#54341,.T.); +#54731 = ORIENTED_EDGE('',*,*,#54732,.T.); +#54732 = EDGE_CURVE('',#54334,#54733,#54735,.T.); +#54733 = VERTEX_POINT('',#54734); +#54734 = CARTESIAN_POINT('',(-0.85,0.25,0.75)); +#54735 = LINE('',#54736,#54737); +#54736 = CARTESIAN_POINT('',(-0.75,0.25,0.75)); +#54737 = VECTOR('',#54738,1.); +#54738 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54739 = ORIENTED_EDGE('',*,*,#54740,.F.); +#54740 = EDGE_CURVE('',#54724,#54733,#54741,.T.); +#54741 = LINE('',#54742,#54743); +#54742 = CARTESIAN_POINT('',(-0.85,-0.25,0.75)); +#54743 = VECTOR('',#54744,1.); +#54744 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54745 = PLANE('',#54746); +#54746 = AXIS2_PLACEMENT_3D('',#54747,#54748,#54749); +#54747 = CARTESIAN_POINT('',(-0.75,-0.25,0.75)); +#54748 = DIRECTION('',(0.,0.,1.)); +#54749 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54750 = ADVANCED_FACE('',(#54751),#54776,.F.); +#54751 = FACE_BOUND('',#54752,.F.); +#54752 = EDGE_LOOP('',(#54753,#54761,#54762,#54770)); +#54753 = ORIENTED_EDGE('',*,*,#54754,.F.); +#54754 = EDGE_CURVE('',#54334,#54755,#54757,.T.); +#54755 = VERTEX_POINT('',#54756); +#54756 = CARTESIAN_POINT('',(-0.8,0.25,0.9)); +#54757 = LINE('',#54758,#54759); +#54758 = CARTESIAN_POINT('',(-0.8,0.25,0.670847817658)); +#54759 = VECTOR('',#54760,1.); +#54760 = DIRECTION('',(0.,0.,1.)); +#54761 = ORIENTED_EDGE('',*,*,#54333,.T.); +#54762 = ORIENTED_EDGE('',*,*,#54763,.T.); +#54763 = EDGE_CURVE('',#54326,#54764,#54766,.T.); +#54764 = VERTEX_POINT('',#54765); +#54765 = CARTESIAN_POINT('',(-0.8,0.7,0.9)); +#54766 = LINE('',#54767,#54768); +#54767 = CARTESIAN_POINT('',(-0.8,0.7,0.670847817658)); +#54768 = VECTOR('',#54769,1.); +#54769 = DIRECTION('',(0.,0.,1.)); +#54770 = ORIENTED_EDGE('',*,*,#54771,.F.); +#54771 = EDGE_CURVE('',#54755,#54764,#54772,.T.); +#54772 = LINE('',#54773,#54774); +#54773 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54774 = VECTOR('',#54775,1.); +#54775 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54776 = PLANE('',#54777); +#54777 = AXIS2_PLACEMENT_3D('',#54778,#54779,#54780); +#54778 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54779 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54780 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54781 = ADVANCED_FACE('',(#54782),#54807,.F.); +#54782 = FACE_BOUND('',#54783,.F.); +#54783 = EDGE_LOOP('',(#54784,#54792,#54793,#54801)); +#54784 = ORIENTED_EDGE('',*,*,#54785,.F.); +#54785 = EDGE_CURVE('',#54326,#54786,#54788,.T.); +#54786 = VERTEX_POINT('',#54787); +#54787 = CARTESIAN_POINT('',(-0.85,0.7,0.75)); +#54788 = LINE('',#54789,#54790); +#54789 = CARTESIAN_POINT('',(-0.75,0.7,0.75)); +#54790 = VECTOR('',#54791,1.); +#54791 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54792 = ORIENTED_EDGE('',*,*,#54325,.T.); +#54793 = ORIENTED_EDGE('',*,*,#54794,.T.); +#54794 = EDGE_CURVE('',#54318,#54795,#54797,.T.); +#54795 = VERTEX_POINT('',#54796); +#54796 = CARTESIAN_POINT('',(-0.85,1.2,0.75)); +#54797 = LINE('',#54798,#54799); +#54798 = CARTESIAN_POINT('',(-0.75,1.2,0.75)); +#54799 = VECTOR('',#54800,1.); +#54800 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54801 = ORIENTED_EDGE('',*,*,#54802,.F.); +#54802 = EDGE_CURVE('',#54786,#54795,#54803,.T.); +#54803 = LINE('',#54804,#54805); +#54804 = CARTESIAN_POINT('',(-0.85,0.7,0.75)); +#54805 = VECTOR('',#54806,1.); +#54806 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54807 = PLANE('',#54808); +#54808 = AXIS2_PLACEMENT_3D('',#54809,#54810,#54811); +#54809 = CARTESIAN_POINT('',(-0.75,0.7,0.75)); +#54810 = DIRECTION('',(0.,0.,1.)); +#54811 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54812 = ADVANCED_FACE('',(#54813),#54824,.F.); +#54813 = FACE_BOUND('',#54814,.F.); +#54814 = EDGE_LOOP('',(#54815,#54821,#54822,#54823)); +#54815 = ORIENTED_EDGE('',*,*,#54816,.F.); +#54816 = EDGE_CURVE('',#54318,#54594,#54817,.T.); +#54817 = LINE('',#54818,#54819); +#54818 = CARTESIAN_POINT('',(-0.8,1.2,0.670847817658)); +#54819 = VECTOR('',#54820,1.); +#54820 = DIRECTION('',(0.,0.,1.)); +#54821 = ORIENTED_EDGE('',*,*,#54317,.T.); +#54822 = ORIENTED_EDGE('',*,*,#54618,.T.); +#54823 = ORIENTED_EDGE('',*,*,#54601,.F.); +#54824 = PLANE('',#54825); +#54825 = AXIS2_PLACEMENT_3D('',#54826,#54827,#54828); +#54826 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#54827 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54828 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54829 = ADVANCED_FACE('',(#54830),#54841,.F.); +#54830 = FACE_BOUND('',#54831,.F.); +#54831 = EDGE_LOOP('',(#54832,#54833,#54834,#54840)); +#54832 = ORIENTED_EDGE('',*,*,#54505,.F.); +#54833 = ORIENTED_EDGE('',*,*,#54426,.T.); +#54834 = ORIENTED_EDGE('',*,*,#54835,.T.); +#54835 = EDGE_CURVE('',#54419,#54538,#54836,.T.); +#54836 = LINE('',#54837,#54838); +#54837 = CARTESIAN_POINT('',(0.8,1.2,0.670847817658)); +#54838 = VECTOR('',#54839,1.); +#54839 = DIRECTION('',(0.,0.,1.)); +#54840 = ORIENTED_EDGE('',*,*,#54537,.F.); +#54841 = PLANE('',#54842); +#54842 = AXIS2_PLACEMENT_3D('',#54843,#54844,#54845); +#54843 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#54844 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54845 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54846 = ADVANCED_FACE('',(#54847),#54872,.F.); +#54847 = FACE_BOUND('',#54848,.F.); +#54848 = EDGE_LOOP('',(#54849,#54857,#54858,#54866)); +#54849 = ORIENTED_EDGE('',*,*,#54850,.F.); +#54850 = EDGE_CURVE('',#54419,#54851,#54853,.T.); +#54851 = VERTEX_POINT('',#54852); +#54852 = CARTESIAN_POINT('',(0.85,1.2,0.75)); +#54853 = LINE('',#54854,#54855); +#54854 = CARTESIAN_POINT('',(0.75,1.2,0.75)); +#54855 = VECTOR('',#54856,1.); +#54856 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54857 = ORIENTED_EDGE('',*,*,#54418,.T.); +#54858 = ORIENTED_EDGE('',*,*,#54859,.T.); +#54859 = EDGE_CURVE('',#54411,#54860,#54862,.T.); +#54860 = VERTEX_POINT('',#54861); +#54861 = CARTESIAN_POINT('',(0.85,0.7,0.75)); +#54862 = LINE('',#54863,#54864); +#54863 = CARTESIAN_POINT('',(0.75,0.7,0.75)); +#54864 = VECTOR('',#54865,1.); +#54865 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54866 = ORIENTED_EDGE('',*,*,#54867,.F.); +#54867 = EDGE_CURVE('',#54851,#54860,#54868,.T.); +#54868 = LINE('',#54869,#54870); +#54869 = CARTESIAN_POINT('',(0.85,1.2,0.75)); +#54870 = VECTOR('',#54871,1.); +#54871 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54872 = PLANE('',#54873); +#54873 = AXIS2_PLACEMENT_3D('',#54874,#54875,#54876); +#54874 = CARTESIAN_POINT('',(0.75,1.2,0.75)); +#54875 = DIRECTION('',(0.,0.,1.)); +#54876 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#54877 = ADVANCED_FACE('',(#54878),#54903,.F.); +#54878 = FACE_BOUND('',#54879,.F.); +#54879 = EDGE_LOOP('',(#54880,#54888,#54889,#54897)); +#54880 = ORIENTED_EDGE('',*,*,#54881,.F.); +#54881 = EDGE_CURVE('',#54411,#54882,#54884,.T.); +#54882 = VERTEX_POINT('',#54883); +#54883 = CARTESIAN_POINT('',(0.8,0.7,0.9)); +#54884 = LINE('',#54885,#54886); +#54885 = CARTESIAN_POINT('',(0.8,0.7,0.670847817658)); +#54886 = VECTOR('',#54887,1.); +#54887 = DIRECTION('',(0.,0.,1.)); +#54888 = ORIENTED_EDGE('',*,*,#54410,.T.); +#54889 = ORIENTED_EDGE('',*,*,#54890,.T.); +#54890 = EDGE_CURVE('',#54403,#54891,#54893,.T.); +#54891 = VERTEX_POINT('',#54892); +#54892 = CARTESIAN_POINT('',(0.8,-0.7,0.9)); +#54893 = LINE('',#54894,#54895); +#54894 = CARTESIAN_POINT('',(0.8,-0.7,0.670847817658)); +#54895 = VECTOR('',#54896,1.); +#54896 = DIRECTION('',(0.,0.,1.)); +#54897 = ORIENTED_EDGE('',*,*,#54898,.F.); +#54898 = EDGE_CURVE('',#54882,#54891,#54899,.T.); +#54899 = LINE('',#54900,#54901); +#54900 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#54901 = VECTOR('',#54902,1.); +#54902 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54903 = PLANE('',#54904); +#54904 = AXIS2_PLACEMENT_3D('',#54905,#54906,#54907); +#54905 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#54906 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54907 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54908 = ADVANCED_FACE('',(#54909),#54934,.F.); +#54909 = FACE_BOUND('',#54910,.F.); +#54910 = EDGE_LOOP('',(#54911,#54919,#54920,#54928)); +#54911 = ORIENTED_EDGE('',*,*,#54912,.F.); +#54912 = EDGE_CURVE('',#54403,#54913,#54915,.T.); +#54913 = VERTEX_POINT('',#54914); +#54914 = CARTESIAN_POINT('',(0.85,-0.7,0.75)); +#54915 = LINE('',#54916,#54917); +#54916 = CARTESIAN_POINT('',(0.75,-0.7,0.75)); +#54917 = VECTOR('',#54918,1.); +#54918 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54919 = ORIENTED_EDGE('',*,*,#54402,.T.); +#54920 = ORIENTED_EDGE('',*,*,#54921,.T.); +#54921 = EDGE_CURVE('',#54395,#54922,#54924,.T.); +#54922 = VERTEX_POINT('',#54923); +#54923 = CARTESIAN_POINT('',(0.85,-1.2,0.75)); +#54924 = LINE('',#54925,#54926); +#54925 = CARTESIAN_POINT('',(0.75,-1.2,0.75)); +#54926 = VECTOR('',#54927,1.); +#54927 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54928 = ORIENTED_EDGE('',*,*,#54929,.F.); +#54929 = EDGE_CURVE('',#54913,#54922,#54930,.T.); +#54930 = LINE('',#54931,#54932); +#54931 = CARTESIAN_POINT('',(0.85,-0.7,0.75)); +#54932 = VECTOR('',#54933,1.); +#54933 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54934 = PLANE('',#54935); +#54935 = AXIS2_PLACEMENT_3D('',#54936,#54937,#54938); +#54936 = CARTESIAN_POINT('',(0.75,-0.7,0.75)); +#54937 = DIRECTION('',(0.,0.,1.)); +#54938 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#54939 = ADVANCED_FACE('',(#54940),#54964,.F.); +#54940 = FACE_BOUND('',#54941,.F.); +#54941 = EDGE_LOOP('',(#54942,#54950,#54951,#54958)); +#54942 = ORIENTED_EDGE('',*,*,#54943,.F.); +#54943 = EDGE_CURVE('',#54395,#54944,#54946,.T.); +#54944 = VERTEX_POINT('',#54945); +#54945 = CARTESIAN_POINT('',(0.8,-1.2,0.9)); +#54946 = LINE('',#54947,#54948); +#54947 = CARTESIAN_POINT('',(0.8,-1.2,0.670847817658)); +#54948 = VECTOR('',#54949,1.); +#54949 = DIRECTION('',(0.,0.,1.)); +#54950 = ORIENTED_EDGE('',*,*,#54394,.T.); +#54951 = ORIENTED_EDGE('',*,*,#54952,.T.); +#54952 = EDGE_CURVE('',#54388,#54953,#54955,.T.); +#54953 = VERTEX_POINT('',#54954); +#54954 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#54955 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54956,#54957),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54956 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#54957 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#54958 = ORIENTED_EDGE('',*,*,#54959,.F.); +#54959 = EDGE_CURVE('',#54944,#54953,#54960,.T.); +#54960 = LINE('',#54961,#54962); +#54961 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#54962 = VECTOR('',#54963,1.); +#54963 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54964 = PLANE('',#54965); +#54965 = AXIS2_PLACEMENT_3D('',#54966,#54967,#54968); +#54966 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#54967 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54968 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54969 = ADVANCED_FACE('',(#54970),#54987,.F.); +#54970 = FACE_BOUND('',#54971,.F.); +#54971 = EDGE_LOOP('',(#54972,#54973,#54974,#54982)); +#54972 = ORIENTED_EDGE('',*,*,#54443,.T.); +#54973 = ORIENTED_EDGE('',*,*,#54631,.T.); +#54974 = ORIENTED_EDGE('',*,*,#54975,.F.); +#54975 = EDGE_CURVE('',#54976,#54632,#54978,.T.); +#54976 = VERTEX_POINT('',#54977); +#54977 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#54978 = LINE('',#54979,#54980); +#54979 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#54980 = VECTOR('',#54981,1.); +#54981 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54982 = ORIENTED_EDGE('',*,*,#54983,.F.); +#54983 = EDGE_CURVE('',#54444,#54976,#54984,.T.); +#54984 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54985,#54986),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54985 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#54986 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#54987 = PLANE('',#54988); +#54988 = AXIS2_PLACEMENT_3D('',#54989,#54990,#54991); +#54989 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#54990 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#54991 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#54992 = ADVANCED_FACE('',(#54993),#55010,.F.); +#54993 = FACE_BOUND('',#54994,.F.); +#54994 = EDGE_LOOP('',(#54995,#54996,#55003,#55009)); +#54995 = ORIENTED_EDGE('',*,*,#54472,.T.); +#54996 = ORIENTED_EDGE('',*,*,#54997,.T.); +#54997 = EDGE_CURVE('',#54466,#54998,#55000,.T.); +#54998 = VERTEX_POINT('',#54999); +#54999 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#55000 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55001,#55002),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55001 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#55002 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#55003 = ORIENTED_EDGE('',*,*,#55004,.F.); +#55004 = EDGE_CURVE('',#54953,#54998,#55005,.T.); +#55005 = LINE('',#55006,#55007); +#55006 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#55007 = VECTOR('',#55008,1.); +#55008 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#55009 = ORIENTED_EDGE('',*,*,#54952,.F.); +#55010 = PLANE('',#55011); +#55011 = AXIS2_PLACEMENT_3D('',#55012,#55013,#55014); +#55012 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#55013 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#55014 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#55015 = ADVANCED_FACE('',(#55016),#55027,.F.); +#55016 = FACE_BOUND('',#55017,.F.); +#55017 = EDGE_LOOP('',(#55018,#55019,#55020,#55026)); +#55018 = ORIENTED_EDGE('',*,*,#54489,.T.); +#55019 = ORIENTED_EDGE('',*,*,#54983,.T.); +#55020 = ORIENTED_EDGE('',*,*,#55021,.F.); +#55021 = EDGE_CURVE('',#54998,#54976,#55022,.T.); +#55022 = LINE('',#55023,#55024); +#55023 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#55024 = VECTOR('',#55025,1.); +#55025 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55026 = ORIENTED_EDGE('',*,*,#54997,.F.); +#55027 = PLANE('',#55028); +#55028 = AXIS2_PLACEMENT_3D('',#55029,#55030,#55031); +#55029 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#55030 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55031 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55032 = ADVANCED_FACE('',(#55033),#55072,.F.); +#55033 = FACE_BOUND('',#55034,.F.); +#55034 = EDGE_LOOP('',(#55035,#55043,#55051,#55057,#55058,#55066)); +#55035 = ORIENTED_EDGE('',*,*,#55036,.F.); +#55036 = EDGE_CURVE('',#55037,#54764,#55039,.T.); +#55037 = VERTEX_POINT('',#55038); +#55038 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#55039 = LINE('',#55040,#55041); +#55040 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#55041 = VECTOR('',#55042,1.); +#55042 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55043 = ORIENTED_EDGE('',*,*,#55044,.T.); +#55044 = EDGE_CURVE('',#55037,#55045,#55047,.T.); +#55045 = VERTEX_POINT('',#55046); +#55046 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#55047 = LINE('',#55048,#55049); +#55048 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#55049 = VECTOR('',#55050,1.); +#55050 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55051 = ORIENTED_EDGE('',*,*,#55052,.T.); +#55052 = EDGE_CURVE('',#55045,#54594,#55053,.T.); +#55053 = LINE('',#55054,#55055); +#55054 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#55055 = VECTOR('',#55056,1.); +#55056 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55057 = ORIENTED_EDGE('',*,*,#54593,.T.); +#55058 = ORIENTED_EDGE('',*,*,#55059,.F.); +#55059 = EDGE_CURVE('',#55060,#54586,#55062,.T.); +#55060 = VERTEX_POINT('',#55061); +#55061 = CARTESIAN_POINT('',(-0.775,0.7,0.9)); +#55062 = LINE('',#55063,#55064); +#55063 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55064 = VECTOR('',#55065,1.); +#55065 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55066 = ORIENTED_EDGE('',*,*,#55067,.F.); +#55067 = EDGE_CURVE('',#54764,#55060,#55068,.T.); +#55068 = LINE('',#55069,#55070); +#55069 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#55070 = VECTOR('',#55071,1.); +#55071 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55072 = PLANE('',#55073); +#55073 = AXIS2_PLACEMENT_3D('',#55074,#55075,#55076); +#55074 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#55075 = DIRECTION('',(0.,0.,-1.)); +#55076 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55077 = ADVANCED_FACE('',(#55078),#55142,.F.); +#55078 = FACE_BOUND('',#55079,.F.); +#55079 = EDGE_LOOP('',(#55080,#55090,#55098,#55106,#55114,#55120,#55121, + #55122,#55129,#55137)); +#55080 = ORIENTED_EDGE('',*,*,#55081,.T.); +#55081 = EDGE_CURVE('',#55082,#55084,#55086,.T.); +#55082 = VERTEX_POINT('',#55083); +#55083 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55084 = VERTEX_POINT('',#55085); +#55085 = CARTESIAN_POINT('',(-0.775,-1.2,0.9)); +#55086 = LINE('',#55087,#55088); +#55087 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55088 = VECTOR('',#55089,1.); +#55089 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55090 = ORIENTED_EDGE('',*,*,#55091,.T.); +#55091 = EDGE_CURVE('',#55084,#55092,#55094,.T.); +#55092 = VERTEX_POINT('',#55093); +#55093 = CARTESIAN_POINT('',(-0.775,-0.7,0.9)); +#55094 = LINE('',#55095,#55096); +#55095 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55096 = VECTOR('',#55097,1.); +#55097 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55098 = ORIENTED_EDGE('',*,*,#55099,.T.); +#55099 = EDGE_CURVE('',#55092,#55100,#55102,.T.); +#55100 = VERTEX_POINT('',#55101); +#55101 = CARTESIAN_POINT('',(-0.775,-0.25,0.9)); +#55102 = LINE('',#55103,#55104); +#55103 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55104 = VECTOR('',#55105,1.); +#55105 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55106 = ORIENTED_EDGE('',*,*,#55107,.T.); +#55107 = EDGE_CURVE('',#55100,#55108,#55110,.T.); +#55108 = VERTEX_POINT('',#55109); +#55109 = CARTESIAN_POINT('',(-0.775,0.25,0.9)); +#55110 = LINE('',#55111,#55112); +#55111 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55112 = VECTOR('',#55113,1.); +#55113 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55114 = ORIENTED_EDGE('',*,*,#55115,.T.); +#55115 = EDGE_CURVE('',#55108,#55060,#55116,.T.); +#55116 = LINE('',#55117,#55118); +#55117 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55118 = VECTOR('',#55119,1.); +#55119 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55120 = ORIENTED_EDGE('',*,*,#55059,.T.); +#55121 = ORIENTED_EDGE('',*,*,#54585,.T.); +#55122 = ORIENTED_EDGE('',*,*,#55123,.T.); +#55123 = EDGE_CURVE('',#54578,#55124,#55126,.T.); +#55124 = VERTEX_POINT('',#55125); +#55125 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#55126 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55127,#55128),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55127 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#55128 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#55129 = ORIENTED_EDGE('',*,*,#55130,.F.); +#55130 = EDGE_CURVE('',#55131,#55124,#55133,.T.); +#55131 = VERTEX_POINT('',#55132); +#55132 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#55133 = LINE('',#55134,#55135); +#55134 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#55135 = VECTOR('',#55136,1.); +#55136 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55137 = ORIENTED_EDGE('',*,*,#55138,.F.); +#55138 = EDGE_CURVE('',#55082,#55131,#55139,.T.); +#55139 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55140,#55141),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55140 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55141 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#55142 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55143,#55144) + ,(#55145,#55146 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#55143 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#55144 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#55145 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#55146 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#55147 = ADVANCED_FACE('',(#55148),#55165,.F.); +#55148 = FACE_BOUND('',#55149,.F.); +#55149 = EDGE_LOOP('',(#55150,#55151,#55158,#55164)); +#55150 = ORIENTED_EDGE('',*,*,#54577,.T.); +#55151 = ORIENTED_EDGE('',*,*,#55152,.T.); +#55152 = EDGE_CURVE('',#54570,#55153,#55155,.T.); +#55153 = VERTEX_POINT('',#55154); +#55154 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#55155 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55156,#55157),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55156 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#55157 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#55158 = ORIENTED_EDGE('',*,*,#55159,.F.); +#55159 = EDGE_CURVE('',#55124,#55153,#55160,.T.); +#55160 = LINE('',#55161,#55162); +#55161 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#55162 = VECTOR('',#55163,1.); +#55163 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#55164 = ORIENTED_EDGE('',*,*,#55123,.F.); +#55165 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55166,#55167) + ,(#55168,#55169 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#55166 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#55167 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#55168 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#55169 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#55170 = ADVANCED_FACE('',(#55171),#55188,.F.); +#55171 = FACE_BOUND('',#55172,.F.); +#55172 = EDGE_LOOP('',(#55173,#55174,#55181,#55187)); +#55173 = ORIENTED_EDGE('',*,*,#54569,.T.); +#55174 = ORIENTED_EDGE('',*,*,#55175,.T.); +#55175 = EDGE_CURVE('',#54562,#55176,#55178,.T.); +#55176 = VERTEX_POINT('',#55177); +#55177 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#55178 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55179,#55180),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55179 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#55180 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#55181 = ORIENTED_EDGE('',*,*,#55182,.F.); +#55182 = EDGE_CURVE('',#55153,#55176,#55183,.T.); +#55183 = LINE('',#55184,#55185); +#55184 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#55185 = VECTOR('',#55186,1.); +#55186 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#55187 = ORIENTED_EDGE('',*,*,#55152,.F.); +#55188 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55189,#55190) + ,(#55191,#55192 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#55189 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#55190 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#55191 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#55192 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#55193 = ADVANCED_FACE('',(#55194),#55211,.F.); +#55194 = FACE_BOUND('',#55195,.F.); +#55195 = EDGE_LOOP('',(#55196,#55197,#55204,#55210)); +#55196 = ORIENTED_EDGE('',*,*,#54561,.T.); +#55197 = ORIENTED_EDGE('',*,*,#55198,.T.); +#55198 = EDGE_CURVE('',#54554,#55199,#55201,.T.); +#55199 = VERTEX_POINT('',#55200); +#55200 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#55201 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55202,#55203),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55202 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#55203 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#55204 = ORIENTED_EDGE('',*,*,#55205,.F.); +#55205 = EDGE_CURVE('',#55176,#55199,#55206,.T.); +#55206 = LINE('',#55207,#55208); +#55207 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#55208 = VECTOR('',#55209,1.); +#55209 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#55210 = ORIENTED_EDGE('',*,*,#55175,.F.); +#55211 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55212,#55213) + ,(#55214,#55215 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#55212 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#55213 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#55214 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#55215 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#55216 = ADVANCED_FACE('',(#55217),#55266,.F.); +#55217 = FACE_BOUND('',#55218,.F.); +#55218 = EDGE_LOOP('',(#55219,#55220,#55228,#55236,#55244,#55252,#55259, + #55265)); +#55219 = ORIENTED_EDGE('',*,*,#54553,.T.); +#55220 = ORIENTED_EDGE('',*,*,#55221,.T.); +#55221 = EDGE_CURVE('',#54546,#55222,#55224,.T.); +#55222 = VERTEX_POINT('',#55223); +#55223 = CARTESIAN_POINT('',(0.775,0.7,0.9)); +#55224 = LINE('',#55225,#55226); +#55225 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#55226 = VECTOR('',#55227,1.); +#55227 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55228 = ORIENTED_EDGE('',*,*,#55229,.T.); +#55229 = EDGE_CURVE('',#55222,#55230,#55232,.T.); +#55230 = VERTEX_POINT('',#55231); +#55231 = CARTESIAN_POINT('',(0.775,-0.7,0.9)); +#55232 = LINE('',#55233,#55234); +#55233 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#55234 = VECTOR('',#55235,1.); +#55235 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55236 = ORIENTED_EDGE('',*,*,#55237,.T.); +#55237 = EDGE_CURVE('',#55230,#55238,#55240,.T.); +#55238 = VERTEX_POINT('',#55239); +#55239 = CARTESIAN_POINT('',(0.775,-1.2,0.9)); +#55240 = LINE('',#55241,#55242); +#55241 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#55242 = VECTOR('',#55243,1.); +#55243 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55244 = ORIENTED_EDGE('',*,*,#55245,.T.); +#55245 = EDGE_CURVE('',#55238,#55246,#55248,.T.); +#55246 = VERTEX_POINT('',#55247); +#55247 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#55248 = LINE('',#55249,#55250); +#55249 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#55250 = VECTOR('',#55251,1.); +#55251 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55252 = ORIENTED_EDGE('',*,*,#55253,.T.); +#55253 = EDGE_CURVE('',#55246,#55254,#55256,.T.); +#55254 = VERTEX_POINT('',#55255); +#55255 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#55256 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55257,#55258),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55257 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#55258 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#55259 = ORIENTED_EDGE('',*,*,#55260,.F.); +#55260 = EDGE_CURVE('',#55199,#55254,#55261,.T.); +#55261 = LINE('',#55262,#55263); +#55262 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#55263 = VECTOR('',#55264,1.); +#55264 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55265 = ORIENTED_EDGE('',*,*,#55198,.F.); +#55266 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55267,#55268) + ,(#55269,#55270 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#55267 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#55268 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#55269 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#55270 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#55271 = ADVANCED_FACE('',(#55272),#55304,.F.); +#55272 = FACE_BOUND('',#55273,.F.); +#55273 = EDGE_LOOP('',(#55274,#55282,#55290,#55296,#55302,#55303)); +#55274 = ORIENTED_EDGE('',*,*,#55275,.F.); +#55275 = EDGE_CURVE('',#55276,#54538,#55278,.T.); +#55276 = VERTEX_POINT('',#55277); +#55277 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#55278 = LINE('',#55279,#55280); +#55279 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#55280 = VECTOR('',#55281,1.); +#55281 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55282 = ORIENTED_EDGE('',*,*,#55283,.T.); +#55283 = EDGE_CURVE('',#55276,#55284,#55286,.T.); +#55284 = VERTEX_POINT('',#55285); +#55285 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#55286 = LINE('',#55287,#55288); +#55287 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#55288 = VECTOR('',#55289,1.); +#55289 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55290 = ORIENTED_EDGE('',*,*,#55291,.T.); +#55291 = EDGE_CURVE('',#55284,#54882,#55292,.T.); +#55292 = LINE('',#55293,#55294); +#55293 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#55294 = VECTOR('',#55295,1.); +#55295 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55296 = ORIENTED_EDGE('',*,*,#55297,.T.); +#55297 = EDGE_CURVE('',#54882,#55222,#55298,.T.); +#55298 = LINE('',#55299,#55300); +#55299 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#55300 = VECTOR('',#55301,1.); +#55301 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55302 = ORIENTED_EDGE('',*,*,#55221,.F.); +#55303 = ORIENTED_EDGE('',*,*,#54545,.F.); +#55304 = PLANE('',#55305); +#55305 = AXIS2_PLACEMENT_3D('',#55306,#55307,#55308); +#55306 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#55307 = DIRECTION('',(0.,0.,-1.)); +#55308 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#55309 = ADVANCED_FACE('',(#55310),#55353,.F.); +#55310 = FACE_BOUND('',#55311,.F.); +#55311 = EDGE_LOOP('',(#55312,#55318,#55319,#55320,#55321,#55322,#55323, + #55329,#55330,#55338,#55346,#55352)); +#55312 = ORIENTED_EDGE('',*,*,#55313,.F.); +#55313 = EDGE_CURVE('',#54944,#55238,#55314,.T.); +#55314 = LINE('',#55315,#55316); +#55315 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#55316 = VECTOR('',#55317,1.); +#55317 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55318 = ORIENTED_EDGE('',*,*,#54959,.T.); +#55319 = ORIENTED_EDGE('',*,*,#55004,.T.); +#55320 = ORIENTED_EDGE('',*,*,#55021,.T.); +#55321 = ORIENTED_EDGE('',*,*,#54975,.T.); +#55322 = ORIENTED_EDGE('',*,*,#54647,.T.); +#55323 = ORIENTED_EDGE('',*,*,#55324,.T.); +#55324 = EDGE_CURVE('',#54640,#55084,#55325,.T.); +#55325 = LINE('',#55326,#55327); +#55326 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#55327 = VECTOR('',#55328,1.); +#55328 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55329 = ORIENTED_EDGE('',*,*,#55081,.F.); +#55330 = ORIENTED_EDGE('',*,*,#55331,.F.); +#55331 = EDGE_CURVE('',#55332,#55082,#55334,.T.); +#55332 = VERTEX_POINT('',#55333); +#55333 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#55334 = LINE('',#55335,#55336); +#55335 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#55336 = VECTOR('',#55337,1.); +#55337 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#55338 = ORIENTED_EDGE('',*,*,#55339,.F.); +#55339 = EDGE_CURVE('',#55340,#55332,#55342,.T.); +#55340 = VERTEX_POINT('',#55341); +#55341 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#55342 = LINE('',#55343,#55344); +#55343 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#55344 = VECTOR('',#55345,1.); +#55345 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55346 = ORIENTED_EDGE('',*,*,#55347,.F.); +#55347 = EDGE_CURVE('',#55246,#55340,#55348,.T.); +#55348 = LINE('',#55349,#55350); +#55349 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#55350 = VECTOR('',#55351,1.); +#55351 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#55352 = ORIENTED_EDGE('',*,*,#55245,.F.); +#55353 = PLANE('',#55354); +#55354 = AXIS2_PLACEMENT_3D('',#55355,#55356,#55357); +#55355 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#55356 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#55357 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#55358 = ADVANCED_FACE('',(#55359),#55445,.F.); +#55359 = FACE_BOUND('',#55360,.F.); +#55360 = EDGE_LOOP('',(#55361,#55362,#55363,#55372,#55380,#55389,#55397, + #55405,#55413,#55422,#55430,#55439)); +#55361 = ORIENTED_EDGE('',*,*,#54639,.F.); +#55362 = ORIENTED_EDGE('',*,*,#54661,.T.); +#55363 = ORIENTED_EDGE('',*,*,#55364,.T.); +#55364 = EDGE_CURVE('',#54662,#55365,#55367,.T.); +#55365 = VERTEX_POINT('',#55366); +#55366 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#55367 = CIRCLE('',#55368,0.1); +#55368 = AXIS2_PLACEMENT_3D('',#55369,#55370,#55371); +#55369 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#55370 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55371 = DIRECTION('',(0.,0.,1.)); +#55372 = ORIENTED_EDGE('',*,*,#55373,.T.); +#55373 = EDGE_CURVE('',#55365,#55374,#55376,.T.); +#55374 = VERTEX_POINT('',#55375); +#55375 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583)); +#55376 = LINE('',#55377,#55378); +#55377 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#55378 = VECTOR('',#55379,1.); +#55379 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#55380 = ORIENTED_EDGE('',*,*,#55381,.T.); +#55381 = EDGE_CURVE('',#55374,#55382,#55384,.T.); +#55382 = VERTEX_POINT('',#55383); +#55383 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#55384 = CIRCLE('',#55385,0.25); +#55385 = AXIS2_PLACEMENT_3D('',#55386,#55387,#55388); +#55386 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#55387 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#55388 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55389 = ORIENTED_EDGE('',*,*,#55390,.T.); +#55390 = EDGE_CURVE('',#55382,#55391,#55393,.T.); +#55391 = VERTEX_POINT('',#55392); +#55392 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#55393 = LINE('',#55394,#55395); +#55394 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#55395 = VECTOR('',#55396,1.); +#55396 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55397 = ORIENTED_EDGE('',*,*,#55398,.T.); +#55398 = EDGE_CURVE('',#55391,#55399,#55401,.T.); +#55399 = VERTEX_POINT('',#55400); +#55400 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#55401 = LINE('',#55402,#55403); +#55402 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#55403 = VECTOR('',#55404,1.); +#55404 = DIRECTION('',(0.,0.,1.)); +#55405 = ORIENTED_EDGE('',*,*,#55406,.T.); +#55406 = EDGE_CURVE('',#55399,#55407,#55409,.T.); +#55407 = VERTEX_POINT('',#55408); +#55408 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15)); +#55409 = LINE('',#55410,#55411); +#55410 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#55411 = VECTOR('',#55412,1.); +#55412 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55413 = ORIENTED_EDGE('',*,*,#55414,.T.); +#55414 = EDGE_CURVE('',#55407,#55415,#55417,.T.); +#55415 = VERTEX_POINT('',#55416); +#55416 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#55417 = CIRCLE('',#55418,0.1); +#55418 = AXIS2_PLACEMENT_3D('',#55419,#55420,#55421); +#55419 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#55420 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55421 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55422 = ORIENTED_EDGE('',*,*,#55423,.T.); +#55423 = EDGE_CURVE('',#55415,#55424,#55426,.T.); +#55424 = VERTEX_POINT('',#55425); +#55425 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417)); +#55426 = LINE('',#55427,#55428); +#55427 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#55428 = VECTOR('',#55429,1.); +#55429 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#55430 = ORIENTED_EDGE('',*,*,#55431,.T.); +#55431 = EDGE_CURVE('',#55424,#55432,#55434,.T.); +#55432 = VERTEX_POINT('',#55433); +#55433 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#55434 = CIRCLE('',#55435,0.25); +#55435 = AXIS2_PLACEMENT_3D('',#55436,#55437,#55438); +#55436 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#55437 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#55438 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55439 = ORIENTED_EDGE('',*,*,#55440,.T.); +#55440 = EDGE_CURVE('',#55432,#54640,#55441,.T.); +#55441 = LINE('',#55442,#55443); +#55442 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#55443 = VECTOR('',#55444,1.); +#55444 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55445 = PLANE('',#55446); +#55446 = AXIS2_PLACEMENT_3D('',#55447,#55448,#55449); +#55447 = CARTESIAN_POINT('',(-1.069123385139,-1.2,0.441695635315)); +#55448 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55449 = DIRECTION('',(0.,-0.,1.)); +#55450 = ADVANCED_FACE('',(#55451),#55470,.F.); +#55451 = FACE_BOUND('',#55452,.F.); +#55452 = EDGE_LOOP('',(#55453,#55454,#55463,#55469)); +#55453 = ORIENTED_EDGE('',*,*,#54678,.T.); +#55454 = ORIENTED_EDGE('',*,*,#55455,.T.); +#55455 = EDGE_CURVE('',#54671,#55456,#55458,.T.); +#55456 = VERTEX_POINT('',#55457); +#55457 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767)); +#55458 = CIRCLE('',#55459,0.1); +#55459 = AXIS2_PLACEMENT_3D('',#55460,#55461,#55462); +#55460 = CARTESIAN_POINT('',(-0.85,-0.7,0.65)); +#55461 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55462 = DIRECTION('',(0.,0.,1.)); +#55463 = ORIENTED_EDGE('',*,*,#55464,.F.); +#55464 = EDGE_CURVE('',#55365,#55456,#55465,.T.); +#55465 = LINE('',#55466,#55467); +#55466 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#55467 = VECTOR('',#55468,1.); +#55468 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55469 = ORIENTED_EDGE('',*,*,#55364,.F.); +#55470 = CYLINDRICAL_SURFACE('',#55471,0.1); +#55471 = AXIS2_PLACEMENT_3D('',#55472,#55473,#55474); +#55472 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#55473 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55474 = DIRECTION('',(0.,0.,1.)); +#55475 = ADVANCED_FACE('',(#55476),#55554,.T.); +#55476 = FACE_BOUND('',#55477,.T.); +#55477 = EDGE_LOOP('',(#55478,#55479,#55480,#55481,#55489,#55498,#55506, + #55514,#55522,#55531,#55539,#55548)); +#55478 = ORIENTED_EDGE('',*,*,#54692,.F.); +#55479 = ORIENTED_EDGE('',*,*,#54670,.T.); +#55480 = ORIENTED_EDGE('',*,*,#55455,.T.); +#55481 = ORIENTED_EDGE('',*,*,#55482,.T.); +#55482 = EDGE_CURVE('',#55456,#55483,#55485,.T.); +#55483 = VERTEX_POINT('',#55484); +#55484 = CARTESIAN_POINT('',(-1.02432885403,-0.7,0.206587955583)); +#55485 = LINE('',#55486,#55487); +#55486 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767)); +#55487 = VECTOR('',#55488,1.); +#55488 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#55489 = ORIENTED_EDGE('',*,*,#55490,.T.); +#55490 = EDGE_CURVE('',#55483,#55491,#55493,.T.); +#55491 = VERTEX_POINT('',#55492); +#55492 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.)); +#55493 = CIRCLE('',#55494,0.25); +#55494 = AXIS2_PLACEMENT_3D('',#55495,#55496,#55497); +#55495 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25)); +#55496 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#55497 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55498 = ORIENTED_EDGE('',*,*,#55499,.T.); +#55499 = EDGE_CURVE('',#55491,#55500,#55502,.T.); +#55500 = VERTEX_POINT('',#55501); +#55501 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#55502 = LINE('',#55503,#55504); +#55503 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.)); +#55504 = VECTOR('',#55505,1.); +#55505 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55506 = ORIENTED_EDGE('',*,*,#55507,.T.); +#55507 = EDGE_CURVE('',#55500,#55508,#55510,.T.); +#55508 = VERTEX_POINT('',#55509); +#55509 = CARTESIAN_POINT('',(-1.4,-0.7,0.15)); +#55510 = LINE('',#55511,#55512); +#55511 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#55512 = VECTOR('',#55513,1.); +#55513 = DIRECTION('',(0.,0.,1.)); +#55514 = ORIENTED_EDGE('',*,*,#55515,.T.); +#55515 = EDGE_CURVE('',#55508,#55516,#55518,.T.); +#55516 = VERTEX_POINT('',#55517); +#55517 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.15)); +#55518 = LINE('',#55519,#55520); +#55519 = CARTESIAN_POINT('',(-1.4,-0.7,0.15)); +#55520 = VECTOR('',#55521,1.); +#55521 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55522 = ORIENTED_EDGE('',*,*,#55523,.T.); +#55523 = EDGE_CURVE('',#55516,#55524,#55526,.T.); +#55524 = VERTEX_POINT('',#55525); +#55525 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233)); +#55526 = CIRCLE('',#55527,0.1); +#55527 = AXIS2_PLACEMENT_3D('',#55528,#55529,#55530); +#55528 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25)); +#55529 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55530 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55531 = ORIENTED_EDGE('',*,*,#55532,.T.); +#55532 = EDGE_CURVE('',#55524,#55533,#55535,.T.); +#55533 = VERTEX_POINT('',#55534); +#55534 = CARTESIAN_POINT('',(-1.096201938253,-0.7,0.693412044417)); +#55535 = LINE('',#55536,#55537); +#55536 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233)); +#55537 = VECTOR('',#55538,1.); +#55538 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#55539 = ORIENTED_EDGE('',*,*,#55540,.T.); +#55540 = EDGE_CURVE('',#55533,#55541,#55543,.T.); +#55541 = VERTEX_POINT('',#55542); +#55542 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#55543 = CIRCLE('',#55544,0.25); +#55544 = AXIS2_PLACEMENT_3D('',#55545,#55546,#55547); +#55545 = CARTESIAN_POINT('',(-0.85,-0.7,0.65)); +#55546 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#55547 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55548 = ORIENTED_EDGE('',*,*,#55549,.T.); +#55549 = EDGE_CURVE('',#55541,#54693,#55550,.T.); +#55550 = LINE('',#55551,#55552); +#55551 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#55552 = VECTOR('',#55553,1.); +#55553 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55554 = PLANE('',#55555); +#55555 = AXIS2_PLACEMENT_3D('',#55556,#55557,#55558); +#55556 = CARTESIAN_POINT('',(-1.069123385139,-0.7,0.441695635315)); +#55557 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55558 = DIRECTION('',(0.,-0.,1.)); +#55559 = ADVANCED_FACE('',(#55560),#55576,.F.); +#55560 = FACE_BOUND('',#55561,.F.); +#55561 = EDGE_LOOP('',(#55562,#55563,#55569,#55570)); +#55562 = ORIENTED_EDGE('',*,*,#54709,.T.); +#55563 = ORIENTED_EDGE('',*,*,#55564,.T.); +#55564 = EDGE_CURVE('',#54702,#55100,#55565,.T.); +#55565 = LINE('',#55566,#55567); +#55566 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#55567 = VECTOR('',#55568,1.); +#55568 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55569 = ORIENTED_EDGE('',*,*,#55099,.F.); +#55570 = ORIENTED_EDGE('',*,*,#55571,.F.); +#55571 = EDGE_CURVE('',#54693,#55092,#55572,.T.); +#55572 = LINE('',#55573,#55574); +#55573 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#55574 = VECTOR('',#55575,1.); +#55575 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55576 = PLANE('',#55577); +#55577 = AXIS2_PLACEMENT_3D('',#55578,#55579,#55580); +#55578 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#55579 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#55580 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#55581 = ADVANCED_FACE('',(#55582),#55668,.F.); +#55582 = FACE_BOUND('',#55583,.F.); +#55583 = EDGE_LOOP('',(#55584,#55585,#55586,#55595,#55603,#55612,#55620, + #55628,#55636,#55645,#55653,#55662)); +#55584 = ORIENTED_EDGE('',*,*,#54701,.F.); +#55585 = ORIENTED_EDGE('',*,*,#54723,.T.); +#55586 = ORIENTED_EDGE('',*,*,#55587,.T.); +#55587 = EDGE_CURVE('',#54724,#55588,#55590,.T.); +#55588 = VERTEX_POINT('',#55589); +#55589 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#55590 = CIRCLE('',#55591,0.1); +#55591 = AXIS2_PLACEMENT_3D('',#55592,#55593,#55594); +#55592 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#55593 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55594 = DIRECTION('',(0.,0.,1.)); +#55595 = ORIENTED_EDGE('',*,*,#55596,.T.); +#55596 = EDGE_CURVE('',#55588,#55597,#55599,.T.); +#55597 = VERTEX_POINT('',#55598); +#55598 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583)); +#55599 = LINE('',#55600,#55601); +#55600 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#55601 = VECTOR('',#55602,1.); +#55602 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#55603 = ORIENTED_EDGE('',*,*,#55604,.T.); +#55604 = EDGE_CURVE('',#55597,#55605,#55607,.T.); +#55605 = VERTEX_POINT('',#55606); +#55606 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#55607 = CIRCLE('',#55608,0.25); +#55608 = AXIS2_PLACEMENT_3D('',#55609,#55610,#55611); +#55609 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#55610 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#55611 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55612 = ORIENTED_EDGE('',*,*,#55613,.T.); +#55613 = EDGE_CURVE('',#55605,#55614,#55616,.T.); +#55614 = VERTEX_POINT('',#55615); +#55615 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#55616 = LINE('',#55617,#55618); +#55617 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#55618 = VECTOR('',#55619,1.); +#55619 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55620 = ORIENTED_EDGE('',*,*,#55621,.T.); +#55621 = EDGE_CURVE('',#55614,#55622,#55624,.T.); +#55622 = VERTEX_POINT('',#55623); +#55623 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#55624 = LINE('',#55625,#55626); +#55625 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#55626 = VECTOR('',#55627,1.); +#55627 = DIRECTION('',(0.,0.,1.)); +#55628 = ORIENTED_EDGE('',*,*,#55629,.T.); +#55629 = EDGE_CURVE('',#55622,#55630,#55632,.T.); +#55630 = VERTEX_POINT('',#55631); +#55631 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15)); +#55632 = LINE('',#55633,#55634); +#55633 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#55634 = VECTOR('',#55635,1.); +#55635 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55636 = ORIENTED_EDGE('',*,*,#55637,.T.); +#55637 = EDGE_CURVE('',#55630,#55638,#55640,.T.); +#55638 = VERTEX_POINT('',#55639); +#55639 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#55640 = CIRCLE('',#55641,0.1); +#55641 = AXIS2_PLACEMENT_3D('',#55642,#55643,#55644); +#55642 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#55643 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55644 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55645 = ORIENTED_EDGE('',*,*,#55646,.T.); +#55646 = EDGE_CURVE('',#55638,#55647,#55649,.T.); +#55647 = VERTEX_POINT('',#55648); +#55648 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417)); +#55649 = LINE('',#55650,#55651); +#55650 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#55651 = VECTOR('',#55652,1.); +#55652 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#55653 = ORIENTED_EDGE('',*,*,#55654,.T.); +#55654 = EDGE_CURVE('',#55647,#55655,#55657,.T.); +#55655 = VERTEX_POINT('',#55656); +#55656 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#55657 = CIRCLE('',#55658,0.25); +#55658 = AXIS2_PLACEMENT_3D('',#55659,#55660,#55661); +#55659 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#55660 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#55661 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55662 = ORIENTED_EDGE('',*,*,#55663,.T.); +#55663 = EDGE_CURVE('',#55655,#54702,#55664,.T.); +#55664 = LINE('',#55665,#55666); +#55665 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#55666 = VECTOR('',#55667,1.); +#55667 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55668 = PLANE('',#55669); +#55669 = AXIS2_PLACEMENT_3D('',#55670,#55671,#55672); +#55670 = CARTESIAN_POINT('',(-1.069123385139,-0.25,0.441695635315)); +#55671 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55672 = DIRECTION('',(0.,-0.,1.)); +#55673 = ADVANCED_FACE('',(#55674),#55693,.F.); +#55674 = FACE_BOUND('',#55675,.F.); +#55675 = EDGE_LOOP('',(#55676,#55677,#55686,#55692)); +#55676 = ORIENTED_EDGE('',*,*,#54740,.T.); +#55677 = ORIENTED_EDGE('',*,*,#55678,.T.); +#55678 = EDGE_CURVE('',#54733,#55679,#55681,.T.); +#55679 = VERTEX_POINT('',#55680); +#55680 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767)); +#55681 = CIRCLE('',#55682,0.1); +#55682 = AXIS2_PLACEMENT_3D('',#55683,#55684,#55685); +#55683 = CARTESIAN_POINT('',(-0.85,0.25,0.65)); +#55684 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55685 = DIRECTION('',(0.,0.,1.)); +#55686 = ORIENTED_EDGE('',*,*,#55687,.F.); +#55687 = EDGE_CURVE('',#55588,#55679,#55688,.T.); +#55688 = LINE('',#55689,#55690); +#55689 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#55690 = VECTOR('',#55691,1.); +#55691 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55692 = ORIENTED_EDGE('',*,*,#55587,.F.); +#55693 = CYLINDRICAL_SURFACE('',#55694,0.1); +#55694 = AXIS2_PLACEMENT_3D('',#55695,#55696,#55697); +#55695 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#55696 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55697 = DIRECTION('',(0.,0.,1.)); +#55698 = ADVANCED_FACE('',(#55699),#55777,.T.); +#55699 = FACE_BOUND('',#55700,.T.); +#55700 = EDGE_LOOP('',(#55701,#55702,#55703,#55704,#55712,#55721,#55729, + #55737,#55745,#55754,#55762,#55771)); +#55701 = ORIENTED_EDGE('',*,*,#54754,.F.); +#55702 = ORIENTED_EDGE('',*,*,#54732,.T.); +#55703 = ORIENTED_EDGE('',*,*,#55678,.T.); +#55704 = ORIENTED_EDGE('',*,*,#55705,.T.); +#55705 = EDGE_CURVE('',#55679,#55706,#55708,.T.); +#55706 = VERTEX_POINT('',#55707); +#55707 = CARTESIAN_POINT('',(-1.02432885403,0.25,0.206587955583)); +#55708 = LINE('',#55709,#55710); +#55709 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767)); +#55710 = VECTOR('',#55711,1.); +#55711 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#55712 = ORIENTED_EDGE('',*,*,#55713,.T.); +#55713 = EDGE_CURVE('',#55706,#55714,#55716,.T.); +#55714 = VERTEX_POINT('',#55715); +#55715 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.)); +#55716 = CIRCLE('',#55717,0.25); +#55717 = AXIS2_PLACEMENT_3D('',#55718,#55719,#55720); +#55718 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25)); +#55719 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#55720 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55721 = ORIENTED_EDGE('',*,*,#55722,.T.); +#55722 = EDGE_CURVE('',#55714,#55723,#55725,.T.); +#55723 = VERTEX_POINT('',#55724); +#55724 = CARTESIAN_POINT('',(-1.4,0.25,0.)); +#55725 = LINE('',#55726,#55727); +#55726 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.)); +#55727 = VECTOR('',#55728,1.); +#55728 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55729 = ORIENTED_EDGE('',*,*,#55730,.T.); +#55730 = EDGE_CURVE('',#55723,#55731,#55733,.T.); +#55731 = VERTEX_POINT('',#55732); +#55732 = CARTESIAN_POINT('',(-1.4,0.25,0.15)); +#55733 = LINE('',#55734,#55735); +#55734 = CARTESIAN_POINT('',(-1.4,0.25,0.)); +#55735 = VECTOR('',#55736,1.); +#55736 = DIRECTION('',(0.,0.,1.)); +#55737 = ORIENTED_EDGE('',*,*,#55738,.T.); +#55738 = EDGE_CURVE('',#55731,#55739,#55741,.T.); +#55739 = VERTEX_POINT('',#55740); +#55740 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.15)); +#55741 = LINE('',#55742,#55743); +#55742 = CARTESIAN_POINT('',(-1.4,0.25,0.15)); +#55743 = VECTOR('',#55744,1.); +#55744 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55745 = ORIENTED_EDGE('',*,*,#55746,.T.); +#55746 = EDGE_CURVE('',#55739,#55747,#55749,.T.); +#55747 = VERTEX_POINT('',#55748); +#55748 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233)); +#55749 = CIRCLE('',#55750,0.1); +#55750 = AXIS2_PLACEMENT_3D('',#55751,#55752,#55753); +#55751 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25)); +#55752 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55753 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55754 = ORIENTED_EDGE('',*,*,#55755,.T.); +#55755 = EDGE_CURVE('',#55747,#55756,#55758,.T.); +#55756 = VERTEX_POINT('',#55757); +#55757 = CARTESIAN_POINT('',(-1.096201938253,0.25,0.693412044417)); +#55758 = LINE('',#55759,#55760); +#55759 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233)); +#55760 = VECTOR('',#55761,1.); +#55761 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#55762 = ORIENTED_EDGE('',*,*,#55763,.T.); +#55763 = EDGE_CURVE('',#55756,#55764,#55766,.T.); +#55764 = VERTEX_POINT('',#55765); +#55765 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#55766 = CIRCLE('',#55767,0.25); +#55767 = AXIS2_PLACEMENT_3D('',#55768,#55769,#55770); +#55768 = CARTESIAN_POINT('',(-0.85,0.25,0.65)); +#55769 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#55770 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55771 = ORIENTED_EDGE('',*,*,#55772,.T.); +#55772 = EDGE_CURVE('',#55764,#54755,#55773,.T.); +#55773 = LINE('',#55774,#55775); +#55774 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#55775 = VECTOR('',#55776,1.); +#55776 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55777 = PLANE('',#55778); +#55778 = AXIS2_PLACEMENT_3D('',#55779,#55780,#55781); +#55779 = CARTESIAN_POINT('',(-1.069123385139,0.25,0.441695635315)); +#55780 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55781 = DIRECTION('',(0.,-0.,1.)); +#55782 = ADVANCED_FACE('',(#55783),#55794,.F.); +#55783 = FACE_BOUND('',#55784,.F.); +#55784 = EDGE_LOOP('',(#55785,#55786,#55787,#55788)); +#55785 = ORIENTED_EDGE('',*,*,#54771,.T.); +#55786 = ORIENTED_EDGE('',*,*,#55067,.T.); +#55787 = ORIENTED_EDGE('',*,*,#55115,.F.); +#55788 = ORIENTED_EDGE('',*,*,#55789,.F.); +#55789 = EDGE_CURVE('',#54755,#55108,#55790,.T.); +#55790 = LINE('',#55791,#55792); +#55791 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#55792 = VECTOR('',#55793,1.); +#55793 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55794 = PLANE('',#55795); +#55795 = AXIS2_PLACEMENT_3D('',#55796,#55797,#55798); +#55796 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#55797 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#55798 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#55799 = ADVANCED_FACE('',(#55800),#55879,.F.); +#55800 = FACE_BOUND('',#55801,.F.); +#55801 = EDGE_LOOP('',(#55802,#55803,#55804,#55813,#55821,#55830,#55838, + #55846,#55854,#55863,#55871,#55878)); +#55802 = ORIENTED_EDGE('',*,*,#54763,.F.); +#55803 = ORIENTED_EDGE('',*,*,#54785,.T.); +#55804 = ORIENTED_EDGE('',*,*,#55805,.T.); +#55805 = EDGE_CURVE('',#54786,#55806,#55808,.T.); +#55806 = VERTEX_POINT('',#55807); +#55807 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#55808 = CIRCLE('',#55809,0.1); +#55809 = AXIS2_PLACEMENT_3D('',#55810,#55811,#55812); +#55810 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#55811 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55812 = DIRECTION('',(0.,0.,1.)); +#55813 = ORIENTED_EDGE('',*,*,#55814,.T.); +#55814 = EDGE_CURVE('',#55806,#55815,#55817,.T.); +#55815 = VERTEX_POINT('',#55816); +#55816 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583)); +#55817 = LINE('',#55818,#55819); +#55818 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#55819 = VECTOR('',#55820,1.); +#55820 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#55821 = ORIENTED_EDGE('',*,*,#55822,.T.); +#55822 = EDGE_CURVE('',#55815,#55823,#55825,.T.); +#55823 = VERTEX_POINT('',#55824); +#55824 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#55825 = CIRCLE('',#55826,0.25); +#55826 = AXIS2_PLACEMENT_3D('',#55827,#55828,#55829); +#55827 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#55828 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#55829 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55830 = ORIENTED_EDGE('',*,*,#55831,.T.); +#55831 = EDGE_CURVE('',#55823,#55832,#55834,.T.); +#55832 = VERTEX_POINT('',#55833); +#55833 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#55834 = LINE('',#55835,#55836); +#55835 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#55836 = VECTOR('',#55837,1.); +#55837 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55838 = ORIENTED_EDGE('',*,*,#55839,.T.); +#55839 = EDGE_CURVE('',#55832,#55840,#55842,.T.); +#55840 = VERTEX_POINT('',#55841); +#55841 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#55842 = LINE('',#55843,#55844); +#55843 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#55844 = VECTOR('',#55845,1.); +#55845 = DIRECTION('',(0.,0.,1.)); +#55846 = ORIENTED_EDGE('',*,*,#55847,.T.); +#55847 = EDGE_CURVE('',#55840,#55848,#55850,.T.); +#55848 = VERTEX_POINT('',#55849); +#55849 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15)); +#55850 = LINE('',#55851,#55852); +#55851 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#55852 = VECTOR('',#55853,1.); +#55853 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55854 = ORIENTED_EDGE('',*,*,#55855,.T.); +#55855 = EDGE_CURVE('',#55848,#55856,#55858,.T.); +#55856 = VERTEX_POINT('',#55857); +#55857 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#55858 = CIRCLE('',#55859,0.1); +#55859 = AXIS2_PLACEMENT_3D('',#55860,#55861,#55862); +#55860 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#55861 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55862 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55863 = ORIENTED_EDGE('',*,*,#55864,.T.); +#55864 = EDGE_CURVE('',#55856,#55865,#55867,.T.); +#55865 = VERTEX_POINT('',#55866); +#55866 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417)); +#55867 = LINE('',#55868,#55869); +#55868 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#55869 = VECTOR('',#55870,1.); +#55870 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#55871 = ORIENTED_EDGE('',*,*,#55872,.T.); +#55872 = EDGE_CURVE('',#55865,#55037,#55873,.T.); +#55873 = CIRCLE('',#55874,0.25); +#55874 = AXIS2_PLACEMENT_3D('',#55875,#55876,#55877); +#55875 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#55876 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#55877 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55878 = ORIENTED_EDGE('',*,*,#55036,.T.); +#55879 = PLANE('',#55880); +#55880 = AXIS2_PLACEMENT_3D('',#55881,#55882,#55883); +#55881 = CARTESIAN_POINT('',(-1.069123385139,0.7,0.441695635315)); +#55882 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55883 = DIRECTION('',(0.,-0.,1.)); +#55884 = ADVANCED_FACE('',(#55885),#55904,.F.); +#55885 = FACE_BOUND('',#55886,.F.); +#55886 = EDGE_LOOP('',(#55887,#55888,#55897,#55903)); +#55887 = ORIENTED_EDGE('',*,*,#54802,.T.); +#55888 = ORIENTED_EDGE('',*,*,#55889,.T.); +#55889 = EDGE_CURVE('',#54795,#55890,#55892,.T.); +#55890 = VERTEX_POINT('',#55891); +#55891 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767)); +#55892 = CIRCLE('',#55893,0.1); +#55893 = AXIS2_PLACEMENT_3D('',#55894,#55895,#55896); +#55894 = CARTESIAN_POINT('',(-0.85,1.2,0.65)); +#55895 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55896 = DIRECTION('',(0.,0.,1.)); +#55897 = ORIENTED_EDGE('',*,*,#55898,.F.); +#55898 = EDGE_CURVE('',#55806,#55890,#55899,.T.); +#55899 = LINE('',#55900,#55901); +#55900 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#55901 = VECTOR('',#55902,1.); +#55902 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55903 = ORIENTED_EDGE('',*,*,#55805,.F.); +#55904 = CYLINDRICAL_SURFACE('',#55905,0.1); +#55905 = AXIS2_PLACEMENT_3D('',#55906,#55907,#55908); +#55906 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#55907 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55908 = DIRECTION('',(0.,0.,1.)); +#55909 = ADVANCED_FACE('',(#55910),#55981,.T.); +#55910 = FACE_BOUND('',#55911,.T.); +#55911 = EDGE_LOOP('',(#55912,#55913,#55914,#55915,#55923,#55932,#55940, + #55948,#55956,#55965,#55973,#55980)); +#55912 = ORIENTED_EDGE('',*,*,#54816,.F.); +#55913 = ORIENTED_EDGE('',*,*,#54794,.T.); +#55914 = ORIENTED_EDGE('',*,*,#55889,.T.); +#55915 = ORIENTED_EDGE('',*,*,#55916,.T.); +#55916 = EDGE_CURVE('',#55890,#55917,#55919,.T.); +#55917 = VERTEX_POINT('',#55918); +#55918 = CARTESIAN_POINT('',(-1.02432885403,1.2,0.206587955583)); +#55919 = LINE('',#55920,#55921); +#55920 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767)); +#55921 = VECTOR('',#55922,1.); +#55922 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#55923 = ORIENTED_EDGE('',*,*,#55924,.T.); +#55924 = EDGE_CURVE('',#55917,#55925,#55927,.T.); +#55925 = VERTEX_POINT('',#55926); +#55926 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.)); +#55927 = CIRCLE('',#55928,0.25); +#55928 = AXIS2_PLACEMENT_3D('',#55929,#55930,#55931); +#55929 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25)); +#55930 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#55931 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55932 = ORIENTED_EDGE('',*,*,#55933,.T.); +#55933 = EDGE_CURVE('',#55925,#55934,#55936,.T.); +#55934 = VERTEX_POINT('',#55935); +#55935 = CARTESIAN_POINT('',(-1.4,1.2,0.)); +#55936 = LINE('',#55937,#55938); +#55937 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.)); +#55938 = VECTOR('',#55939,1.); +#55939 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55940 = ORIENTED_EDGE('',*,*,#55941,.T.); +#55941 = EDGE_CURVE('',#55934,#55942,#55944,.T.); +#55942 = VERTEX_POINT('',#55943); +#55943 = CARTESIAN_POINT('',(-1.4,1.2,0.15)); +#55944 = LINE('',#55945,#55946); +#55945 = CARTESIAN_POINT('',(-1.4,1.2,0.)); +#55946 = VECTOR('',#55947,1.); +#55947 = DIRECTION('',(0.,0.,1.)); +#55948 = ORIENTED_EDGE('',*,*,#55949,.T.); +#55949 = EDGE_CURVE('',#55942,#55950,#55952,.T.); +#55950 = VERTEX_POINT('',#55951); +#55951 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.15)); +#55952 = LINE('',#55953,#55954); +#55953 = CARTESIAN_POINT('',(-1.4,1.2,0.15)); +#55954 = VECTOR('',#55955,1.); +#55955 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55956 = ORIENTED_EDGE('',*,*,#55957,.T.); +#55957 = EDGE_CURVE('',#55950,#55958,#55960,.T.); +#55958 = VERTEX_POINT('',#55959); +#55959 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233)); +#55960 = CIRCLE('',#55961,0.1); +#55961 = AXIS2_PLACEMENT_3D('',#55962,#55963,#55964); +#55962 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25)); +#55963 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55964 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55965 = ORIENTED_EDGE('',*,*,#55966,.T.); +#55966 = EDGE_CURVE('',#55958,#55967,#55969,.T.); +#55967 = VERTEX_POINT('',#55968); +#55968 = CARTESIAN_POINT('',(-1.096201938253,1.2,0.693412044417)); +#55969 = LINE('',#55970,#55971); +#55970 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233)); +#55971 = VECTOR('',#55972,1.); +#55972 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#55973 = ORIENTED_EDGE('',*,*,#55974,.T.); +#55974 = EDGE_CURVE('',#55967,#55045,#55975,.T.); +#55975 = CIRCLE('',#55976,0.25); +#55976 = AXIS2_PLACEMENT_3D('',#55977,#55978,#55979); +#55977 = CARTESIAN_POINT('',(-0.85,1.2,0.65)); +#55978 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#55979 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55980 = ORIENTED_EDGE('',*,*,#55052,.T.); +#55981 = PLANE('',#55982); +#55982 = AXIS2_PLACEMENT_3D('',#55983,#55984,#55985); +#55983 = CARTESIAN_POINT('',(-1.069123385139,1.2,0.441695635315)); +#55984 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55985 = DIRECTION('',(0.,-0.,1.)); +#55986 = ADVANCED_FACE('',(#55987),#56066,.F.); +#55987 = FACE_BOUND('',#55988,.F.); +#55988 = EDGE_LOOP('',(#55989,#55990,#55991,#56000,#56008,#56017,#56025, + #56033,#56041,#56050,#56058,#56065)); +#55989 = ORIENTED_EDGE('',*,*,#54835,.F.); +#55990 = ORIENTED_EDGE('',*,*,#54850,.T.); +#55991 = ORIENTED_EDGE('',*,*,#55992,.T.); +#55992 = EDGE_CURVE('',#54851,#55993,#55995,.T.); +#55993 = VERTEX_POINT('',#55994); +#55994 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#55995 = CIRCLE('',#55996,0.1); +#55996 = AXIS2_PLACEMENT_3D('',#55997,#55998,#55999); +#55997 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#55998 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55999 = DIRECTION('',(0.,0.,1.)); +#56000 = ORIENTED_EDGE('',*,*,#56001,.T.); +#56001 = EDGE_CURVE('',#55993,#56002,#56004,.T.); +#56002 = VERTEX_POINT('',#56003); +#56003 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583)); +#56004 = LINE('',#56005,#56006); +#56005 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#56006 = VECTOR('',#56007,1.); +#56007 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#56008 = ORIENTED_EDGE('',*,*,#56009,.T.); +#56009 = EDGE_CURVE('',#56002,#56010,#56012,.T.); +#56010 = VERTEX_POINT('',#56011); +#56011 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#56012 = CIRCLE('',#56013,0.25); +#56013 = AXIS2_PLACEMENT_3D('',#56014,#56015,#56016); +#56014 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#56015 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56016 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#56017 = ORIENTED_EDGE('',*,*,#56018,.T.); +#56018 = EDGE_CURVE('',#56010,#56019,#56021,.T.); +#56019 = VERTEX_POINT('',#56020); +#56020 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#56021 = LINE('',#56022,#56023); +#56022 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#56023 = VECTOR('',#56024,1.); +#56024 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56025 = ORIENTED_EDGE('',*,*,#56026,.T.); +#56026 = EDGE_CURVE('',#56019,#56027,#56029,.T.); +#56027 = VERTEX_POINT('',#56028); +#56028 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#56029 = LINE('',#56030,#56031); +#56030 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#56031 = VECTOR('',#56032,1.); +#56032 = DIRECTION('',(0.,0.,1.)); +#56033 = ORIENTED_EDGE('',*,*,#56034,.T.); +#56034 = EDGE_CURVE('',#56027,#56035,#56037,.T.); +#56035 = VERTEX_POINT('',#56036); +#56036 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15)); +#56037 = LINE('',#56038,#56039); +#56038 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#56039 = VECTOR('',#56040,1.); +#56040 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56041 = ORIENTED_EDGE('',*,*,#56042,.T.); +#56042 = EDGE_CURVE('',#56035,#56043,#56045,.T.); +#56043 = VERTEX_POINT('',#56044); +#56044 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#56045 = CIRCLE('',#56046,0.1); +#56046 = AXIS2_PLACEMENT_3D('',#56047,#56048,#56049); +#56047 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#56048 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56049 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#56050 = ORIENTED_EDGE('',*,*,#56051,.T.); +#56051 = EDGE_CURVE('',#56043,#56052,#56054,.T.); +#56052 = VERTEX_POINT('',#56053); +#56053 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417)); +#56054 = LINE('',#56055,#56056); +#56055 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#56056 = VECTOR('',#56057,1.); +#56057 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#56058 = ORIENTED_EDGE('',*,*,#56059,.T.); +#56059 = EDGE_CURVE('',#56052,#55276,#56060,.T.); +#56060 = CIRCLE('',#56061,0.25); +#56061 = AXIS2_PLACEMENT_3D('',#56062,#56063,#56064); +#56062 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#56063 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56064 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#56065 = ORIENTED_EDGE('',*,*,#55275,.T.); +#56066 = PLANE('',#56067); +#56067 = AXIS2_PLACEMENT_3D('',#56068,#56069,#56070); +#56068 = CARTESIAN_POINT('',(1.069123385139,1.2,0.441695635315)); +#56069 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56070 = DIRECTION('',(0.,0.,1.)); +#56071 = ADVANCED_FACE('',(#56072),#56091,.F.); +#56072 = FACE_BOUND('',#56073,.F.); +#56073 = EDGE_LOOP('',(#56074,#56075,#56084,#56090)); +#56074 = ORIENTED_EDGE('',*,*,#54867,.T.); +#56075 = ORIENTED_EDGE('',*,*,#56076,.T.); +#56076 = EDGE_CURVE('',#54860,#56077,#56079,.T.); +#56077 = VERTEX_POINT('',#56078); +#56078 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767)); +#56079 = CIRCLE('',#56080,0.1); +#56080 = AXIS2_PLACEMENT_3D('',#56081,#56082,#56083); +#56081 = CARTESIAN_POINT('',(0.85,0.7,0.65)); +#56082 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56083 = DIRECTION('',(0.,0.,1.)); +#56084 = ORIENTED_EDGE('',*,*,#56085,.F.); +#56085 = EDGE_CURVE('',#55993,#56077,#56086,.T.); +#56086 = LINE('',#56087,#56088); +#56087 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#56088 = VECTOR('',#56089,1.); +#56089 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56090 = ORIENTED_EDGE('',*,*,#55992,.F.); +#56091 = CYLINDRICAL_SURFACE('',#56092,0.1); +#56092 = AXIS2_PLACEMENT_3D('',#56093,#56094,#56095); +#56093 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#56094 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56095 = DIRECTION('',(0.,0.,1.)); +#56096 = ADVANCED_FACE('',(#56097),#56168,.T.); +#56097 = FACE_BOUND('',#56098,.T.); +#56098 = EDGE_LOOP('',(#56099,#56100,#56101,#56102,#56110,#56119,#56127, + #56135,#56143,#56152,#56160,#56167)); +#56099 = ORIENTED_EDGE('',*,*,#54881,.F.); +#56100 = ORIENTED_EDGE('',*,*,#54859,.T.); +#56101 = ORIENTED_EDGE('',*,*,#56076,.T.); +#56102 = ORIENTED_EDGE('',*,*,#56103,.T.); +#56103 = EDGE_CURVE('',#56077,#56104,#56106,.T.); +#56104 = VERTEX_POINT('',#56105); +#56105 = CARTESIAN_POINT('',(1.02432885403,0.7,0.206587955583)); +#56106 = LINE('',#56107,#56108); +#56107 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767)); +#56108 = VECTOR('',#56109,1.); +#56109 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#56110 = ORIENTED_EDGE('',*,*,#56111,.T.); +#56111 = EDGE_CURVE('',#56104,#56112,#56114,.T.); +#56112 = VERTEX_POINT('',#56113); +#56113 = CARTESIAN_POINT('',(1.270530792283,0.7,0.)); +#56114 = CIRCLE('',#56115,0.25); +#56115 = AXIS2_PLACEMENT_3D('',#56116,#56117,#56118); +#56116 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25)); +#56117 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56118 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#56119 = ORIENTED_EDGE('',*,*,#56120,.T.); +#56120 = EDGE_CURVE('',#56112,#56121,#56123,.T.); +#56121 = VERTEX_POINT('',#56122); +#56122 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#56123 = LINE('',#56124,#56125); +#56124 = CARTESIAN_POINT('',(1.270530792283,0.7,0.)); +#56125 = VECTOR('',#56126,1.); +#56126 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56127 = ORIENTED_EDGE('',*,*,#56128,.T.); +#56128 = EDGE_CURVE('',#56121,#56129,#56131,.T.); +#56129 = VERTEX_POINT('',#56130); +#56130 = CARTESIAN_POINT('',(1.4,0.7,0.15)); +#56131 = LINE('',#56132,#56133); +#56132 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#56133 = VECTOR('',#56134,1.); +#56134 = DIRECTION('',(0.,0.,1.)); +#56135 = ORIENTED_EDGE('',*,*,#56136,.T.); +#56136 = EDGE_CURVE('',#56129,#56137,#56139,.T.); +#56137 = VERTEX_POINT('',#56138); +#56138 = CARTESIAN_POINT('',(1.270530792283,0.7,0.15)); +#56139 = LINE('',#56140,#56141); +#56140 = CARTESIAN_POINT('',(1.4,0.7,0.15)); +#56141 = VECTOR('',#56142,1.); +#56142 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56143 = ORIENTED_EDGE('',*,*,#56144,.T.); +#56144 = EDGE_CURVE('',#56137,#56145,#56147,.T.); +#56145 = VERTEX_POINT('',#56146); +#56146 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233)); +#56147 = CIRCLE('',#56148,0.1); +#56148 = AXIS2_PLACEMENT_3D('',#56149,#56150,#56151); +#56149 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25)); +#56150 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56151 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#56152 = ORIENTED_EDGE('',*,*,#56153,.T.); +#56153 = EDGE_CURVE('',#56145,#56154,#56156,.T.); +#56154 = VERTEX_POINT('',#56155); +#56155 = CARTESIAN_POINT('',(1.096201938253,0.7,0.693412044417)); +#56156 = LINE('',#56157,#56158); +#56157 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233)); +#56158 = VECTOR('',#56159,1.); +#56159 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#56160 = ORIENTED_EDGE('',*,*,#56161,.T.); +#56161 = EDGE_CURVE('',#56154,#55284,#56162,.T.); +#56162 = CIRCLE('',#56163,0.25); +#56163 = AXIS2_PLACEMENT_3D('',#56164,#56165,#56166); +#56164 = CARTESIAN_POINT('',(0.85,0.7,0.65)); +#56165 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56166 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#56167 = ORIENTED_EDGE('',*,*,#55291,.T.); +#56168 = PLANE('',#56169); +#56169 = AXIS2_PLACEMENT_3D('',#56170,#56171,#56172); +#56170 = CARTESIAN_POINT('',(1.069123385139,0.7,0.441695635315)); +#56171 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56172 = DIRECTION('',(0.,0.,1.)); +#56173 = ADVANCED_FACE('',(#56174),#56185,.F.); +#56174 = FACE_BOUND('',#56175,.F.); +#56175 = EDGE_LOOP('',(#56176,#56177,#56178,#56184)); +#56176 = ORIENTED_EDGE('',*,*,#55297,.F.); +#56177 = ORIENTED_EDGE('',*,*,#54898,.T.); +#56178 = ORIENTED_EDGE('',*,*,#56179,.T.); +#56179 = EDGE_CURVE('',#54891,#55230,#56180,.T.); +#56180 = LINE('',#56181,#56182); +#56181 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#56182 = VECTOR('',#56183,1.); +#56183 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56184 = ORIENTED_EDGE('',*,*,#55229,.F.); +#56185 = PLANE('',#56186); +#56186 = AXIS2_PLACEMENT_3D('',#56187,#56188,#56189); +#56187 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#56188 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#56189 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#56190 = ADVANCED_FACE('',(#56191),#56277,.F.); +#56191 = FACE_BOUND('',#56192,.F.); +#56192 = EDGE_LOOP('',(#56193,#56194,#56195,#56204,#56212,#56221,#56229, + #56237,#56245,#56254,#56262,#56271)); +#56193 = ORIENTED_EDGE('',*,*,#54890,.F.); +#56194 = ORIENTED_EDGE('',*,*,#54912,.T.); +#56195 = ORIENTED_EDGE('',*,*,#56196,.T.); +#56196 = EDGE_CURVE('',#54913,#56197,#56199,.T.); +#56197 = VERTEX_POINT('',#56198); +#56198 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#56199 = CIRCLE('',#56200,0.1); +#56200 = AXIS2_PLACEMENT_3D('',#56201,#56202,#56203); +#56201 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#56202 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56203 = DIRECTION('',(0.,0.,1.)); +#56204 = ORIENTED_EDGE('',*,*,#56205,.T.); +#56205 = EDGE_CURVE('',#56197,#56206,#56208,.T.); +#56206 = VERTEX_POINT('',#56207); +#56207 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583)); +#56208 = LINE('',#56209,#56210); +#56209 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#56210 = VECTOR('',#56211,1.); +#56211 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#56212 = ORIENTED_EDGE('',*,*,#56213,.T.); +#56213 = EDGE_CURVE('',#56206,#56214,#56216,.T.); +#56214 = VERTEX_POINT('',#56215); +#56215 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#56216 = CIRCLE('',#56217,0.25); +#56217 = AXIS2_PLACEMENT_3D('',#56218,#56219,#56220); +#56218 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#56219 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56220 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#56221 = ORIENTED_EDGE('',*,*,#56222,.T.); +#56222 = EDGE_CURVE('',#56214,#56223,#56225,.T.); +#56223 = VERTEX_POINT('',#56224); +#56224 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#56225 = LINE('',#56226,#56227); +#56226 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#56227 = VECTOR('',#56228,1.); +#56228 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56229 = ORIENTED_EDGE('',*,*,#56230,.T.); +#56230 = EDGE_CURVE('',#56223,#56231,#56233,.T.); +#56231 = VERTEX_POINT('',#56232); +#56232 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#56233 = LINE('',#56234,#56235); +#56234 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#56235 = VECTOR('',#56236,1.); +#56236 = DIRECTION('',(0.,0.,1.)); +#56237 = ORIENTED_EDGE('',*,*,#56238,.T.); +#56238 = EDGE_CURVE('',#56231,#56239,#56241,.T.); +#56239 = VERTEX_POINT('',#56240); +#56240 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15)); +#56241 = LINE('',#56242,#56243); +#56242 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#56243 = VECTOR('',#56244,1.); +#56244 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56245 = ORIENTED_EDGE('',*,*,#56246,.T.); +#56246 = EDGE_CURVE('',#56239,#56247,#56249,.T.); +#56247 = VERTEX_POINT('',#56248); +#56248 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#56249 = CIRCLE('',#56250,0.1); +#56250 = AXIS2_PLACEMENT_3D('',#56251,#56252,#56253); +#56251 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#56252 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56253 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#56254 = ORIENTED_EDGE('',*,*,#56255,.T.); +#56255 = EDGE_CURVE('',#56247,#56256,#56258,.T.); +#56256 = VERTEX_POINT('',#56257); +#56257 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417)); +#56258 = LINE('',#56259,#56260); +#56259 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#56260 = VECTOR('',#56261,1.); +#56261 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#56262 = ORIENTED_EDGE('',*,*,#56263,.T.); +#56263 = EDGE_CURVE('',#56256,#56264,#56266,.T.); +#56264 = VERTEX_POINT('',#56265); +#56265 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#56266 = CIRCLE('',#56267,0.25); +#56267 = AXIS2_PLACEMENT_3D('',#56268,#56269,#56270); +#56268 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#56269 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56270 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#56271 = ORIENTED_EDGE('',*,*,#56272,.T.); +#56272 = EDGE_CURVE('',#56264,#54891,#56273,.T.); +#56273 = LINE('',#56274,#56275); +#56274 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#56275 = VECTOR('',#56276,1.); +#56276 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56277 = PLANE('',#56278); +#56278 = AXIS2_PLACEMENT_3D('',#56279,#56280,#56281); +#56279 = CARTESIAN_POINT('',(1.069123385139,-0.7,0.441695635315)); +#56280 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56281 = DIRECTION('',(0.,0.,1.)); +#56282 = ADVANCED_FACE('',(#56283),#56302,.F.); +#56283 = FACE_BOUND('',#56284,.F.); +#56284 = EDGE_LOOP('',(#56285,#56286,#56295,#56301)); +#56285 = ORIENTED_EDGE('',*,*,#54929,.T.); +#56286 = ORIENTED_EDGE('',*,*,#56287,.T.); +#56287 = EDGE_CURVE('',#54922,#56288,#56290,.T.); +#56288 = VERTEX_POINT('',#56289); +#56289 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767)); +#56290 = CIRCLE('',#56291,0.1); +#56291 = AXIS2_PLACEMENT_3D('',#56292,#56293,#56294); +#56292 = CARTESIAN_POINT('',(0.85,-1.2,0.65)); +#56293 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56294 = DIRECTION('',(0.,0.,1.)); +#56295 = ORIENTED_EDGE('',*,*,#56296,.F.); +#56296 = EDGE_CURVE('',#56197,#56288,#56297,.T.); +#56297 = LINE('',#56298,#56299); +#56298 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#56299 = VECTOR('',#56300,1.); +#56300 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56301 = ORIENTED_EDGE('',*,*,#56196,.F.); +#56302 = CYLINDRICAL_SURFACE('',#56303,0.1); +#56303 = AXIS2_PLACEMENT_3D('',#56304,#56305,#56306); +#56304 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#56305 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56306 = DIRECTION('',(0.,0.,1.)); +#56307 = ADVANCED_FACE('',(#56308),#56386,.T.); +#56308 = FACE_BOUND('',#56309,.T.); +#56309 = EDGE_LOOP('',(#56310,#56311,#56312,#56313,#56321,#56330,#56338, + #56346,#56354,#56363,#56371,#56380)); +#56310 = ORIENTED_EDGE('',*,*,#54943,.F.); +#56311 = ORIENTED_EDGE('',*,*,#54921,.T.); +#56312 = ORIENTED_EDGE('',*,*,#56287,.T.); +#56313 = ORIENTED_EDGE('',*,*,#56314,.T.); +#56314 = EDGE_CURVE('',#56288,#56315,#56317,.T.); +#56315 = VERTEX_POINT('',#56316); +#56316 = CARTESIAN_POINT('',(1.02432885403,-1.2,0.206587955583)); +#56317 = LINE('',#56318,#56319); +#56318 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767)); +#56319 = VECTOR('',#56320,1.); +#56320 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#56321 = ORIENTED_EDGE('',*,*,#56322,.T.); +#56322 = EDGE_CURVE('',#56315,#56323,#56325,.T.); +#56323 = VERTEX_POINT('',#56324); +#56324 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.)); +#56325 = CIRCLE('',#56326,0.25); +#56326 = AXIS2_PLACEMENT_3D('',#56327,#56328,#56329); +#56327 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25)); +#56328 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56329 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#56330 = ORIENTED_EDGE('',*,*,#56331,.T.); +#56331 = EDGE_CURVE('',#56323,#56332,#56334,.T.); +#56332 = VERTEX_POINT('',#56333); +#56333 = CARTESIAN_POINT('',(1.4,-1.2,0.)); +#56334 = LINE('',#56335,#56336); +#56335 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.)); +#56336 = VECTOR('',#56337,1.); +#56337 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56338 = ORIENTED_EDGE('',*,*,#56339,.T.); +#56339 = EDGE_CURVE('',#56332,#56340,#56342,.T.); +#56340 = VERTEX_POINT('',#56341); +#56341 = CARTESIAN_POINT('',(1.4,-1.2,0.15)); +#56342 = LINE('',#56343,#56344); +#56343 = CARTESIAN_POINT('',(1.4,-1.2,0.)); +#56344 = VECTOR('',#56345,1.); +#56345 = DIRECTION('',(0.,0.,1.)); +#56346 = ORIENTED_EDGE('',*,*,#56347,.T.); +#56347 = EDGE_CURVE('',#56340,#56348,#56350,.T.); +#56348 = VERTEX_POINT('',#56349); +#56349 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.15)); +#56350 = LINE('',#56351,#56352); +#56351 = CARTESIAN_POINT('',(1.4,-1.2,0.15)); +#56352 = VECTOR('',#56353,1.); +#56353 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56354 = ORIENTED_EDGE('',*,*,#56355,.T.); +#56355 = EDGE_CURVE('',#56348,#56356,#56358,.T.); +#56356 = VERTEX_POINT('',#56357); +#56357 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233)); +#56358 = CIRCLE('',#56359,0.1); +#56359 = AXIS2_PLACEMENT_3D('',#56360,#56361,#56362); +#56360 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25)); +#56361 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56362 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#56363 = ORIENTED_EDGE('',*,*,#56364,.T.); +#56364 = EDGE_CURVE('',#56356,#56365,#56367,.T.); +#56365 = VERTEX_POINT('',#56366); +#56366 = CARTESIAN_POINT('',(1.096201938253,-1.2,0.693412044417)); +#56367 = LINE('',#56368,#56369); +#56368 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233)); +#56369 = VECTOR('',#56370,1.); +#56370 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#56371 = ORIENTED_EDGE('',*,*,#56372,.T.); +#56372 = EDGE_CURVE('',#56365,#56373,#56375,.T.); +#56373 = VERTEX_POINT('',#56374); +#56374 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#56375 = CIRCLE('',#56376,0.25); +#56376 = AXIS2_PLACEMENT_3D('',#56377,#56378,#56379); +#56377 = CARTESIAN_POINT('',(0.85,-1.2,0.65)); +#56378 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56379 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#56380 = ORIENTED_EDGE('',*,*,#56381,.T.); +#56381 = EDGE_CURVE('',#56373,#54944,#56382,.T.); +#56382 = LINE('',#56383,#56384); +#56383 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#56384 = VECTOR('',#56385,1.); +#56385 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56386 = PLANE('',#56387); +#56387 = AXIS2_PLACEMENT_3D('',#56388,#56389,#56390); +#56388 = CARTESIAN_POINT('',(1.069123385139,-1.2,0.441695635315)); +#56389 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56390 = DIRECTION('',(0.,0.,1.)); +#56391 = ADVANCED_FACE('',(#56392),#56403,.T.); +#56392 = FACE_BOUND('',#56393,.T.); +#56393 = EDGE_LOOP('',(#56394,#56395,#56396,#56397)); +#56394 = ORIENTED_EDGE('',*,*,#55872,.T.); +#56395 = ORIENTED_EDGE('',*,*,#55044,.T.); +#56396 = ORIENTED_EDGE('',*,*,#55974,.F.); +#56397 = ORIENTED_EDGE('',*,*,#56398,.F.); +#56398 = EDGE_CURVE('',#55865,#55967,#56399,.T.); +#56399 = LINE('',#56400,#56401); +#56400 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417)); +#56401 = VECTOR('',#56402,1.); +#56402 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56403 = CYLINDRICAL_SURFACE('',#56404,0.25); +#56404 = AXIS2_PLACEMENT_3D('',#56405,#56406,#56407); +#56405 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#56406 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56407 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#56408 = ADVANCED_FACE('',(#56409),#56422,.F.); +#56409 = FACE_BOUND('',#56410,.F.); +#56410 = EDGE_LOOP('',(#56411,#56412,#56418,#56419,#56420,#56421)); +#56411 = ORIENTED_EDGE('',*,*,#55440,.F.); +#56412 = ORIENTED_EDGE('',*,*,#56413,.T.); +#56413 = EDGE_CURVE('',#55432,#55541,#56414,.T.); +#56414 = LINE('',#56415,#56416); +#56415 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#56416 = VECTOR('',#56417,1.); +#56417 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56418 = ORIENTED_EDGE('',*,*,#55549,.T.); +#56419 = ORIENTED_EDGE('',*,*,#55571,.T.); +#56420 = ORIENTED_EDGE('',*,*,#55091,.F.); +#56421 = ORIENTED_EDGE('',*,*,#55324,.F.); +#56422 = PLANE('',#56423); +#56423 = AXIS2_PLACEMENT_3D('',#56424,#56425,#56426); +#56424 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#56425 = DIRECTION('',(0.,0.,-1.)); +#56426 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56427 = ADVANCED_FACE('',(#56428),#56441,.F.); +#56428 = FACE_BOUND('',#56429,.F.); +#56429 = EDGE_LOOP('',(#56430,#56431,#56437,#56438,#56439,#56440)); +#56430 = ORIENTED_EDGE('',*,*,#55663,.F.); +#56431 = ORIENTED_EDGE('',*,*,#56432,.T.); +#56432 = EDGE_CURVE('',#55655,#55764,#56433,.T.); +#56433 = LINE('',#56434,#56435); +#56434 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#56435 = VECTOR('',#56436,1.); +#56436 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56437 = ORIENTED_EDGE('',*,*,#55772,.T.); +#56438 = ORIENTED_EDGE('',*,*,#55789,.T.); +#56439 = ORIENTED_EDGE('',*,*,#55107,.F.); +#56440 = ORIENTED_EDGE('',*,*,#55564,.F.); +#56441 = PLANE('',#56442); +#56442 = AXIS2_PLACEMENT_3D('',#56443,#56444,#56445); +#56443 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#56444 = DIRECTION('',(0.,0.,-1.)); +#56445 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56446 = ADVANCED_FACE('',(#56447,#56476),#56487,.T.); +#56447 = FACE_BOUND('',#56448,.T.); +#56448 = EDGE_LOOP('',(#56449,#56450,#56451,#56452,#56460,#56468,#56474, + #56475)); +#56449 = ORIENTED_EDGE('',*,*,#55182,.F.); +#56450 = ORIENTED_EDGE('',*,*,#55159,.F.); +#56451 = ORIENTED_EDGE('',*,*,#55130,.F.); +#56452 = ORIENTED_EDGE('',*,*,#56453,.F.); +#56453 = EDGE_CURVE('',#56454,#55131,#56456,.T.); +#56454 = VERTEX_POINT('',#56455); +#56455 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#56456 = LINE('',#56457,#56458); +#56457 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#56458 = VECTOR('',#56459,1.); +#56459 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#56460 = ORIENTED_EDGE('',*,*,#56461,.F.); +#56461 = EDGE_CURVE('',#56462,#56454,#56464,.T.); +#56462 = VERTEX_POINT('',#56463); +#56463 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#56464 = LINE('',#56465,#56466); +#56465 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#56466 = VECTOR('',#56467,1.); +#56467 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56468 = ORIENTED_EDGE('',*,*,#56469,.F.); +#56469 = EDGE_CURVE('',#55254,#56462,#56470,.T.); +#56470 = LINE('',#56471,#56472); +#56471 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#56472 = VECTOR('',#56473,1.); +#56473 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#56474 = ORIENTED_EDGE('',*,*,#55260,.F.); +#56475 = ORIENTED_EDGE('',*,*,#55205,.F.); +#56476 = FACE_BOUND('',#56477,.T.); +#56477 = EDGE_LOOP('',(#56478)); +#56478 = ORIENTED_EDGE('',*,*,#56479,.T.); +#56479 = EDGE_CURVE('',#56480,#56480,#56482,.T.); +#56480 = VERTEX_POINT('',#56481); +#56481 = CARTESIAN_POINT('',(-0.483648457443,1.083648457443,1.55)); +#56482 = CIRCLE('',#56483,5.E-02); +#56483 = AXIS2_PLACEMENT_3D('',#56484,#56485,#56486); +#56484 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55)); +#56485 = DIRECTION('',(0.,-0.,-1.)); +#56486 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56487 = PLANE('',#56488); +#56488 = AXIS2_PLACEMENT_3D('',#56489,#56490,#56491); +#56489 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#56490 = DIRECTION('',(0.,0.,1.)); +#56491 = DIRECTION('',(0.436386464522,-0.899759330922,0.)); +#56492 = ADVANCED_FACE('',(#56493),#56503,.F.); +#56493 = FACE_BOUND('',#56494,.F.); +#56494 = EDGE_LOOP('',(#56495,#56496,#56497,#56498)); +#56495 = ORIENTED_EDGE('',*,*,#55331,.T.); +#56496 = ORIENTED_EDGE('',*,*,#55138,.T.); +#56497 = ORIENTED_EDGE('',*,*,#56453,.F.); +#56498 = ORIENTED_EDGE('',*,*,#56499,.F.); +#56499 = EDGE_CURVE('',#55332,#56454,#56500,.T.); +#56500 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56501,#56502),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56501 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#56502 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#56503 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56504,#56505) + ,(#56506,#56507 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#56504 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#56505 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#56506 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56507 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#56508 = ADVANCED_FACE('',(#56509),#56522,.F.); +#56509 = FACE_BOUND('',#56510,.F.); +#56510 = EDGE_LOOP('',(#56511,#56512,#56518,#56519,#56520,#56521)); +#56511 = ORIENTED_EDGE('',*,*,#56272,.F.); +#56512 = ORIENTED_EDGE('',*,*,#56513,.T.); +#56513 = EDGE_CURVE('',#56264,#56373,#56514,.T.); +#56514 = LINE('',#56515,#56516); +#56515 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#56516 = VECTOR('',#56517,1.); +#56517 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56518 = ORIENTED_EDGE('',*,*,#56381,.T.); +#56519 = ORIENTED_EDGE('',*,*,#55313,.T.); +#56520 = ORIENTED_EDGE('',*,*,#55237,.F.); +#56521 = ORIENTED_EDGE('',*,*,#56179,.F.); +#56522 = PLANE('',#56523); +#56523 = AXIS2_PLACEMENT_3D('',#56524,#56525,#56526); +#56524 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#56525 = DIRECTION('',(0.,0.,-1.)); +#56526 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#56527 = ADVANCED_FACE('',(#56528),#56538,.F.); +#56528 = FACE_BOUND('',#56529,.F.); +#56529 = EDGE_LOOP('',(#56530,#56531,#56536,#56537)); +#56530 = ORIENTED_EDGE('',*,*,#55347,.T.); +#56531 = ORIENTED_EDGE('',*,*,#56532,.T.); +#56532 = EDGE_CURVE('',#55340,#56462,#56533,.T.); +#56533 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56534,#56535),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56534 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#56535 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#56536 = ORIENTED_EDGE('',*,*,#56469,.F.); +#56537 = ORIENTED_EDGE('',*,*,#55253,.F.); +#56538 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56539,#56540) + ,(#56541,#56542 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#56539 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#56540 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#56541 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#56542 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#56543 = ADVANCED_FACE('',(#56544),#56555,.T.); +#56544 = FACE_BOUND('',#56545,.T.); +#56545 = EDGE_LOOP('',(#56546,#56547,#56548,#56549)); +#56546 = ORIENTED_EDGE('',*,*,#56059,.T.); +#56547 = ORIENTED_EDGE('',*,*,#55283,.T.); +#56548 = ORIENTED_EDGE('',*,*,#56161,.F.); +#56549 = ORIENTED_EDGE('',*,*,#56550,.F.); +#56550 = EDGE_CURVE('',#56052,#56154,#56551,.T.); +#56551 = LINE('',#56552,#56553); +#56552 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417)); +#56553 = VECTOR('',#56554,1.); +#56554 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56555 = CYLINDRICAL_SURFACE('',#56556,0.25); +#56556 = AXIS2_PLACEMENT_3D('',#56557,#56558,#56559); +#56557 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#56558 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56559 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#56560 = ADVANCED_FACE('',(#56561),#56567,.F.); +#56561 = FACE_BOUND('',#56562,.F.); +#56562 = EDGE_LOOP('',(#56563,#56564,#56565,#56566)); +#56563 = ORIENTED_EDGE('',*,*,#55339,.T.); +#56564 = ORIENTED_EDGE('',*,*,#56499,.T.); +#56565 = ORIENTED_EDGE('',*,*,#56461,.F.); +#56566 = ORIENTED_EDGE('',*,*,#56532,.F.); +#56567 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56568,#56569) + ,(#56570,#56571 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56568 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#56569 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#56570 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#56571 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#56572 = ADVANCED_FACE('',(#56573),#56584,.T.); +#56573 = FACE_BOUND('',#56574,.T.); +#56574 = EDGE_LOOP('',(#56575,#56576,#56577,#56578)); +#56575 = ORIENTED_EDGE('',*,*,#55431,.T.); +#56576 = ORIENTED_EDGE('',*,*,#56413,.T.); +#56577 = ORIENTED_EDGE('',*,*,#55540,.F.); +#56578 = ORIENTED_EDGE('',*,*,#56579,.F.); +#56579 = EDGE_CURVE('',#55424,#55533,#56580,.T.); +#56580 = LINE('',#56581,#56582); +#56581 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417)); +#56582 = VECTOR('',#56583,1.); +#56583 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56584 = CYLINDRICAL_SURFACE('',#56585,0.25); +#56585 = AXIS2_PLACEMENT_3D('',#56586,#56587,#56588); +#56586 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#56587 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56588 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#56589 = ADVANCED_FACE('',(#56590),#56601,.F.); +#56590 = FACE_BOUND('',#56591,.F.); +#56591 = EDGE_LOOP('',(#56592,#56598,#56599,#56600)); +#56592 = ORIENTED_EDGE('',*,*,#56593,.T.); +#56593 = EDGE_CURVE('',#55415,#55524,#56594,.T.); +#56594 = LINE('',#56595,#56596); +#56595 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#56596 = VECTOR('',#56597,1.); +#56597 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56598 = ORIENTED_EDGE('',*,*,#55532,.T.); +#56599 = ORIENTED_EDGE('',*,*,#56579,.F.); +#56600 = ORIENTED_EDGE('',*,*,#55423,.F.); +#56601 = PLANE('',#56602); +#56602 = AXIS2_PLACEMENT_3D('',#56603,#56604,#56605); +#56603 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#56604 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#56605 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#56606 = ADVANCED_FACE('',(#56607),#56618,.F.); +#56607 = FACE_BOUND('',#56608,.F.); +#56608 = EDGE_LOOP('',(#56609,#56615,#56616,#56617)); +#56609 = ORIENTED_EDGE('',*,*,#56610,.T.); +#56610 = EDGE_CURVE('',#55407,#55516,#56611,.T.); +#56611 = LINE('',#56612,#56613); +#56612 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15)); +#56613 = VECTOR('',#56614,1.); +#56614 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56615 = ORIENTED_EDGE('',*,*,#55523,.T.); +#56616 = ORIENTED_EDGE('',*,*,#56593,.F.); +#56617 = ORIENTED_EDGE('',*,*,#55414,.F.); +#56618 = CYLINDRICAL_SURFACE('',#56619,0.1); +#56619 = AXIS2_PLACEMENT_3D('',#56620,#56621,#56622); +#56620 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#56621 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56622 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#56623 = ADVANCED_FACE('',(#56624),#56635,.F.); +#56624 = FACE_BOUND('',#56625,.F.); +#56625 = EDGE_LOOP('',(#56626,#56632,#56633,#56634)); +#56626 = ORIENTED_EDGE('',*,*,#56627,.T.); +#56627 = EDGE_CURVE('',#55399,#55508,#56628,.T.); +#56628 = LINE('',#56629,#56630); +#56629 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#56630 = VECTOR('',#56631,1.); +#56631 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56632 = ORIENTED_EDGE('',*,*,#55515,.T.); +#56633 = ORIENTED_EDGE('',*,*,#56610,.F.); +#56634 = ORIENTED_EDGE('',*,*,#55406,.F.); +#56635 = PLANE('',#56636); +#56636 = AXIS2_PLACEMENT_3D('',#56637,#56638,#56639); +#56637 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#56638 = DIRECTION('',(0.,0.,-1.)); +#56639 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56640 = ADVANCED_FACE('',(#56641),#56652,.F.); +#56641 = FACE_BOUND('',#56642,.F.); +#56642 = EDGE_LOOP('',(#56643,#56649,#56650,#56651)); +#56643 = ORIENTED_EDGE('',*,*,#56644,.T.); +#56644 = EDGE_CURVE('',#55391,#55500,#56645,.T.); +#56645 = LINE('',#56646,#56647); +#56646 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#56647 = VECTOR('',#56648,1.); +#56648 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56649 = ORIENTED_EDGE('',*,*,#55507,.T.); +#56650 = ORIENTED_EDGE('',*,*,#56627,.F.); +#56651 = ORIENTED_EDGE('',*,*,#55398,.F.); +#56652 = PLANE('',#56653); +#56653 = AXIS2_PLACEMENT_3D('',#56654,#56655,#56656); +#56654 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#56655 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56656 = DIRECTION('',(0.,0.,1.)); +#56657 = ADVANCED_FACE('',(#56658),#56669,.F.); +#56658 = FACE_BOUND('',#56659,.F.); +#56659 = EDGE_LOOP('',(#56660,#56666,#56667,#56668)); +#56660 = ORIENTED_EDGE('',*,*,#56661,.T.); +#56661 = EDGE_CURVE('',#55382,#55491,#56662,.T.); +#56662 = LINE('',#56663,#56664); +#56663 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#56664 = VECTOR('',#56665,1.); +#56665 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56666 = ORIENTED_EDGE('',*,*,#55499,.T.); +#56667 = ORIENTED_EDGE('',*,*,#56644,.F.); +#56668 = ORIENTED_EDGE('',*,*,#55390,.F.); +#56669 = PLANE('',#56670); +#56670 = AXIS2_PLACEMENT_3D('',#56671,#56672,#56673); +#56671 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#56672 = DIRECTION('',(0.,0.,1.)); +#56673 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56674 = ADVANCED_FACE('',(#56675),#56686,.T.); +#56675 = FACE_BOUND('',#56676,.T.); +#56676 = EDGE_LOOP('',(#56677,#56678,#56679,#56680)); +#56677 = ORIENTED_EDGE('',*,*,#55381,.T.); +#56678 = ORIENTED_EDGE('',*,*,#56661,.T.); +#56679 = ORIENTED_EDGE('',*,*,#55490,.F.); +#56680 = ORIENTED_EDGE('',*,*,#56681,.F.); +#56681 = EDGE_CURVE('',#55374,#55483,#56682,.T.); +#56682 = LINE('',#56683,#56684); +#56683 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583)); +#56684 = VECTOR('',#56685,1.); +#56685 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56686 = CYLINDRICAL_SURFACE('',#56687,0.25); +#56687 = AXIS2_PLACEMENT_3D('',#56688,#56689,#56690); +#56688 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#56689 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56690 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#56691 = ADVANCED_FACE('',(#56692),#56698,.F.); +#56692 = FACE_BOUND('',#56693,.F.); +#56693 = EDGE_LOOP('',(#56694,#56695,#56696,#56697)); +#56694 = ORIENTED_EDGE('',*,*,#55464,.T.); +#56695 = ORIENTED_EDGE('',*,*,#55482,.T.); +#56696 = ORIENTED_EDGE('',*,*,#56681,.F.); +#56697 = ORIENTED_EDGE('',*,*,#55373,.F.); +#56698 = PLANE('',#56699); +#56699 = AXIS2_PLACEMENT_3D('',#56700,#56701,#56702); +#56700 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#56701 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#56702 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#56703 = ADVANCED_FACE('',(#56704),#56715,.T.); +#56704 = FACE_BOUND('',#56705,.T.); +#56705 = EDGE_LOOP('',(#56706,#56707,#56708,#56709)); +#56706 = ORIENTED_EDGE('',*,*,#55654,.T.); +#56707 = ORIENTED_EDGE('',*,*,#56432,.T.); +#56708 = ORIENTED_EDGE('',*,*,#55763,.F.); +#56709 = ORIENTED_EDGE('',*,*,#56710,.F.); +#56710 = EDGE_CURVE('',#55647,#55756,#56711,.T.); +#56711 = LINE('',#56712,#56713); +#56712 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417)); +#56713 = VECTOR('',#56714,1.); +#56714 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56715 = CYLINDRICAL_SURFACE('',#56716,0.25); +#56716 = AXIS2_PLACEMENT_3D('',#56717,#56718,#56719); +#56717 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#56718 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56719 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#56720 = ADVANCED_FACE('',(#56721),#56732,.F.); +#56721 = FACE_BOUND('',#56722,.F.); +#56722 = EDGE_LOOP('',(#56723,#56729,#56730,#56731)); +#56723 = ORIENTED_EDGE('',*,*,#56724,.T.); +#56724 = EDGE_CURVE('',#55638,#55747,#56725,.T.); +#56725 = LINE('',#56726,#56727); +#56726 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#56727 = VECTOR('',#56728,1.); +#56728 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56729 = ORIENTED_EDGE('',*,*,#55755,.T.); +#56730 = ORIENTED_EDGE('',*,*,#56710,.F.); +#56731 = ORIENTED_EDGE('',*,*,#55646,.F.); +#56732 = PLANE('',#56733); +#56733 = AXIS2_PLACEMENT_3D('',#56734,#56735,#56736); +#56734 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#56735 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#56736 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#56737 = ADVANCED_FACE('',(#56738),#56749,.F.); +#56738 = FACE_BOUND('',#56739,.F.); +#56739 = EDGE_LOOP('',(#56740,#56746,#56747,#56748)); +#56740 = ORIENTED_EDGE('',*,*,#56741,.T.); +#56741 = EDGE_CURVE('',#55630,#55739,#56742,.T.); +#56742 = LINE('',#56743,#56744); +#56743 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15)); +#56744 = VECTOR('',#56745,1.); +#56745 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56746 = ORIENTED_EDGE('',*,*,#55746,.T.); +#56747 = ORIENTED_EDGE('',*,*,#56724,.F.); +#56748 = ORIENTED_EDGE('',*,*,#55637,.F.); +#56749 = CYLINDRICAL_SURFACE('',#56750,0.1); +#56750 = AXIS2_PLACEMENT_3D('',#56751,#56752,#56753); +#56751 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#56752 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56753 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#56754 = ADVANCED_FACE('',(#56755),#56766,.F.); +#56755 = FACE_BOUND('',#56756,.F.); +#56756 = EDGE_LOOP('',(#56757,#56763,#56764,#56765)); +#56757 = ORIENTED_EDGE('',*,*,#56758,.T.); +#56758 = EDGE_CURVE('',#55622,#55731,#56759,.T.); +#56759 = LINE('',#56760,#56761); +#56760 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#56761 = VECTOR('',#56762,1.); +#56762 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56763 = ORIENTED_EDGE('',*,*,#55738,.T.); +#56764 = ORIENTED_EDGE('',*,*,#56741,.F.); +#56765 = ORIENTED_EDGE('',*,*,#55629,.F.); +#56766 = PLANE('',#56767); +#56767 = AXIS2_PLACEMENT_3D('',#56768,#56769,#56770); +#56768 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#56769 = DIRECTION('',(0.,0.,-1.)); +#56770 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56771 = ADVANCED_FACE('',(#56772),#56783,.F.); +#56772 = FACE_BOUND('',#56773,.F.); +#56773 = EDGE_LOOP('',(#56774,#56780,#56781,#56782)); +#56774 = ORIENTED_EDGE('',*,*,#56775,.T.); +#56775 = EDGE_CURVE('',#55614,#55723,#56776,.T.); +#56776 = LINE('',#56777,#56778); +#56777 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#56778 = VECTOR('',#56779,1.); +#56779 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56780 = ORIENTED_EDGE('',*,*,#55730,.T.); +#56781 = ORIENTED_EDGE('',*,*,#56758,.F.); +#56782 = ORIENTED_EDGE('',*,*,#55621,.F.); +#56783 = PLANE('',#56784); +#56784 = AXIS2_PLACEMENT_3D('',#56785,#56786,#56787); +#56785 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#56786 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56787 = DIRECTION('',(0.,0.,1.)); +#56788 = ADVANCED_FACE('',(#56789),#56800,.F.); +#56789 = FACE_BOUND('',#56790,.F.); +#56790 = EDGE_LOOP('',(#56791,#56797,#56798,#56799)); +#56791 = ORIENTED_EDGE('',*,*,#56792,.T.); +#56792 = EDGE_CURVE('',#55605,#55714,#56793,.T.); +#56793 = LINE('',#56794,#56795); +#56794 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#56795 = VECTOR('',#56796,1.); +#56796 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56797 = ORIENTED_EDGE('',*,*,#55722,.T.); +#56798 = ORIENTED_EDGE('',*,*,#56775,.F.); +#56799 = ORIENTED_EDGE('',*,*,#55613,.F.); +#56800 = PLANE('',#56801); +#56801 = AXIS2_PLACEMENT_3D('',#56802,#56803,#56804); +#56802 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#56803 = DIRECTION('',(0.,0.,1.)); +#56804 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56805 = ADVANCED_FACE('',(#56806),#56817,.T.); +#56806 = FACE_BOUND('',#56807,.T.); +#56807 = EDGE_LOOP('',(#56808,#56809,#56810,#56811)); +#56808 = ORIENTED_EDGE('',*,*,#55604,.T.); +#56809 = ORIENTED_EDGE('',*,*,#56792,.T.); +#56810 = ORIENTED_EDGE('',*,*,#55713,.F.); +#56811 = ORIENTED_EDGE('',*,*,#56812,.F.); +#56812 = EDGE_CURVE('',#55597,#55706,#56813,.T.); +#56813 = LINE('',#56814,#56815); +#56814 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583)); +#56815 = VECTOR('',#56816,1.); +#56816 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56817 = CYLINDRICAL_SURFACE('',#56818,0.25); +#56818 = AXIS2_PLACEMENT_3D('',#56819,#56820,#56821); +#56819 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#56820 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56821 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#56822 = ADVANCED_FACE('',(#56823),#56829,.F.); +#56823 = FACE_BOUND('',#56824,.F.); +#56824 = EDGE_LOOP('',(#56825,#56826,#56827,#56828)); +#56825 = ORIENTED_EDGE('',*,*,#55687,.T.); +#56826 = ORIENTED_EDGE('',*,*,#55705,.T.); +#56827 = ORIENTED_EDGE('',*,*,#56812,.F.); +#56828 = ORIENTED_EDGE('',*,*,#55596,.F.); +#56829 = PLANE('',#56830); +#56830 = AXIS2_PLACEMENT_3D('',#56831,#56832,#56833); +#56831 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#56832 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#56833 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#56834 = ADVANCED_FACE('',(#56835),#56846,.F.); +#56835 = FACE_BOUND('',#56836,.F.); +#56836 = EDGE_LOOP('',(#56837,#56843,#56844,#56845)); +#56837 = ORIENTED_EDGE('',*,*,#56838,.T.); +#56838 = EDGE_CURVE('',#55856,#55958,#56839,.T.); +#56839 = LINE('',#56840,#56841); +#56840 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#56841 = VECTOR('',#56842,1.); +#56842 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56843 = ORIENTED_EDGE('',*,*,#55966,.T.); +#56844 = ORIENTED_EDGE('',*,*,#56398,.F.); +#56845 = ORIENTED_EDGE('',*,*,#55864,.F.); +#56846 = PLANE('',#56847); +#56847 = AXIS2_PLACEMENT_3D('',#56848,#56849,#56850); +#56848 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#56849 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#56850 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#56851 = ADVANCED_FACE('',(#56852),#56863,.F.); +#56852 = FACE_BOUND('',#56853,.F.); +#56853 = EDGE_LOOP('',(#56854,#56860,#56861,#56862)); +#56854 = ORIENTED_EDGE('',*,*,#56855,.T.); +#56855 = EDGE_CURVE('',#55848,#55950,#56856,.T.); +#56856 = LINE('',#56857,#56858); +#56857 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15)); +#56858 = VECTOR('',#56859,1.); +#56859 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56860 = ORIENTED_EDGE('',*,*,#55957,.T.); +#56861 = ORIENTED_EDGE('',*,*,#56838,.F.); +#56862 = ORIENTED_EDGE('',*,*,#55855,.F.); +#56863 = CYLINDRICAL_SURFACE('',#56864,0.1); +#56864 = AXIS2_PLACEMENT_3D('',#56865,#56866,#56867); +#56865 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#56866 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56867 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#56868 = ADVANCED_FACE('',(#56869),#56880,.F.); +#56869 = FACE_BOUND('',#56870,.F.); +#56870 = EDGE_LOOP('',(#56871,#56877,#56878,#56879)); +#56871 = ORIENTED_EDGE('',*,*,#56872,.T.); +#56872 = EDGE_CURVE('',#55840,#55942,#56873,.T.); +#56873 = LINE('',#56874,#56875); +#56874 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#56875 = VECTOR('',#56876,1.); +#56876 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56877 = ORIENTED_EDGE('',*,*,#55949,.T.); +#56878 = ORIENTED_EDGE('',*,*,#56855,.F.); +#56879 = ORIENTED_EDGE('',*,*,#55847,.F.); +#56880 = PLANE('',#56881); +#56881 = AXIS2_PLACEMENT_3D('',#56882,#56883,#56884); +#56882 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#56883 = DIRECTION('',(0.,0.,-1.)); +#56884 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56885 = ADVANCED_FACE('',(#56886),#56897,.F.); +#56886 = FACE_BOUND('',#56887,.F.); +#56887 = EDGE_LOOP('',(#56888,#56894,#56895,#56896)); +#56888 = ORIENTED_EDGE('',*,*,#56889,.T.); +#56889 = EDGE_CURVE('',#55832,#55934,#56890,.T.); +#56890 = LINE('',#56891,#56892); +#56891 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#56892 = VECTOR('',#56893,1.); +#56893 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56894 = ORIENTED_EDGE('',*,*,#55941,.T.); +#56895 = ORIENTED_EDGE('',*,*,#56872,.F.); +#56896 = ORIENTED_EDGE('',*,*,#55839,.F.); +#56897 = PLANE('',#56898); +#56898 = AXIS2_PLACEMENT_3D('',#56899,#56900,#56901); +#56899 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#56900 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56901 = DIRECTION('',(0.,0.,1.)); +#56902 = ADVANCED_FACE('',(#56903),#56914,.F.); +#56903 = FACE_BOUND('',#56904,.F.); +#56904 = EDGE_LOOP('',(#56905,#56911,#56912,#56913)); +#56905 = ORIENTED_EDGE('',*,*,#56906,.T.); +#56906 = EDGE_CURVE('',#55823,#55925,#56907,.T.); +#56907 = LINE('',#56908,#56909); +#56908 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#56909 = VECTOR('',#56910,1.); +#56910 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56911 = ORIENTED_EDGE('',*,*,#55933,.T.); +#56912 = ORIENTED_EDGE('',*,*,#56889,.F.); +#56913 = ORIENTED_EDGE('',*,*,#55831,.F.); +#56914 = PLANE('',#56915); +#56915 = AXIS2_PLACEMENT_3D('',#56916,#56917,#56918); +#56916 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#56917 = DIRECTION('',(0.,0.,1.)); +#56918 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56919 = ADVANCED_FACE('',(#56920),#56931,.T.); +#56920 = FACE_BOUND('',#56921,.T.); +#56921 = EDGE_LOOP('',(#56922,#56923,#56924,#56925)); +#56922 = ORIENTED_EDGE('',*,*,#55822,.T.); +#56923 = ORIENTED_EDGE('',*,*,#56906,.T.); +#56924 = ORIENTED_EDGE('',*,*,#55924,.F.); +#56925 = ORIENTED_EDGE('',*,*,#56926,.F.); +#56926 = EDGE_CURVE('',#55815,#55917,#56927,.T.); +#56927 = LINE('',#56928,#56929); +#56928 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583)); +#56929 = VECTOR('',#56930,1.); +#56930 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56931 = CYLINDRICAL_SURFACE('',#56932,0.25); +#56932 = AXIS2_PLACEMENT_3D('',#56933,#56934,#56935); +#56933 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#56934 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#56935 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#56936 = ADVANCED_FACE('',(#56937),#56943,.F.); +#56937 = FACE_BOUND('',#56938,.F.); +#56938 = EDGE_LOOP('',(#56939,#56940,#56941,#56942)); +#56939 = ORIENTED_EDGE('',*,*,#55898,.T.); +#56940 = ORIENTED_EDGE('',*,*,#55916,.T.); +#56941 = ORIENTED_EDGE('',*,*,#56926,.F.); +#56942 = ORIENTED_EDGE('',*,*,#55814,.F.); +#56943 = PLANE('',#56944); +#56944 = AXIS2_PLACEMENT_3D('',#56945,#56946,#56947); +#56945 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#56946 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#56947 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#56948 = ADVANCED_FACE('',(#56949),#56960,.F.); +#56949 = FACE_BOUND('',#56950,.F.); +#56950 = EDGE_LOOP('',(#56951,#56957,#56958,#56959)); +#56951 = ORIENTED_EDGE('',*,*,#56952,.T.); +#56952 = EDGE_CURVE('',#56043,#56145,#56953,.T.); +#56953 = LINE('',#56954,#56955); +#56954 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#56955 = VECTOR('',#56956,1.); +#56956 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56957 = ORIENTED_EDGE('',*,*,#56153,.T.); +#56958 = ORIENTED_EDGE('',*,*,#56550,.F.); +#56959 = ORIENTED_EDGE('',*,*,#56051,.F.); +#56960 = PLANE('',#56961); +#56961 = AXIS2_PLACEMENT_3D('',#56962,#56963,#56964); +#56962 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#56963 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#56964 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#56965 = ADVANCED_FACE('',(#56966),#56977,.F.); +#56966 = FACE_BOUND('',#56967,.F.); +#56967 = EDGE_LOOP('',(#56968,#56974,#56975,#56976)); +#56968 = ORIENTED_EDGE('',*,*,#56969,.T.); +#56969 = EDGE_CURVE('',#56035,#56137,#56970,.T.); +#56970 = LINE('',#56971,#56972); +#56971 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15)); +#56972 = VECTOR('',#56973,1.); +#56973 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56974 = ORIENTED_EDGE('',*,*,#56144,.T.); +#56975 = ORIENTED_EDGE('',*,*,#56952,.F.); +#56976 = ORIENTED_EDGE('',*,*,#56042,.F.); +#56977 = CYLINDRICAL_SURFACE('',#56978,0.1); +#56978 = AXIS2_PLACEMENT_3D('',#56979,#56980,#56981); +#56979 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#56980 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56981 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#56982 = ADVANCED_FACE('',(#56983),#56994,.F.); +#56983 = FACE_BOUND('',#56984,.F.); +#56984 = EDGE_LOOP('',(#56985,#56991,#56992,#56993)); +#56985 = ORIENTED_EDGE('',*,*,#56986,.T.); +#56986 = EDGE_CURVE('',#56027,#56129,#56987,.T.); +#56987 = LINE('',#56988,#56989); +#56988 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#56989 = VECTOR('',#56990,1.); +#56990 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56991 = ORIENTED_EDGE('',*,*,#56136,.T.); +#56992 = ORIENTED_EDGE('',*,*,#56969,.F.); +#56993 = ORIENTED_EDGE('',*,*,#56034,.F.); +#56994 = PLANE('',#56995); +#56995 = AXIS2_PLACEMENT_3D('',#56996,#56997,#56998); +#56996 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#56997 = DIRECTION('',(0.,0.,-1.)); +#56998 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#56999 = ADVANCED_FACE('',(#57000),#57011,.F.); +#57000 = FACE_BOUND('',#57001,.F.); +#57001 = EDGE_LOOP('',(#57002,#57008,#57009,#57010)); +#57002 = ORIENTED_EDGE('',*,*,#57003,.T.); +#57003 = EDGE_CURVE('',#56019,#56121,#57004,.T.); +#57004 = LINE('',#57005,#57006); +#57005 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#57006 = VECTOR('',#57007,1.); +#57007 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57008 = ORIENTED_EDGE('',*,*,#56128,.T.); +#57009 = ORIENTED_EDGE('',*,*,#56986,.F.); +#57010 = ORIENTED_EDGE('',*,*,#56026,.F.); +#57011 = PLANE('',#57012); +#57012 = AXIS2_PLACEMENT_3D('',#57013,#57014,#57015); +#57013 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#57014 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57015 = DIRECTION('',(0.,0.,1.)); +#57016 = ADVANCED_FACE('',(#57017),#57028,.F.); +#57017 = FACE_BOUND('',#57018,.F.); +#57018 = EDGE_LOOP('',(#57019,#57025,#57026,#57027)); +#57019 = ORIENTED_EDGE('',*,*,#57020,.T.); +#57020 = EDGE_CURVE('',#56010,#56112,#57021,.T.); +#57021 = LINE('',#57022,#57023); +#57022 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#57023 = VECTOR('',#57024,1.); +#57024 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57025 = ORIENTED_EDGE('',*,*,#56120,.T.); +#57026 = ORIENTED_EDGE('',*,*,#57003,.F.); +#57027 = ORIENTED_EDGE('',*,*,#56018,.F.); +#57028 = PLANE('',#57029); +#57029 = AXIS2_PLACEMENT_3D('',#57030,#57031,#57032); +#57030 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#57031 = DIRECTION('',(0.,0.,1.)); +#57032 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#57033 = ADVANCED_FACE('',(#57034),#57045,.T.); +#57034 = FACE_BOUND('',#57035,.T.); +#57035 = EDGE_LOOP('',(#57036,#57037,#57038,#57039)); +#57036 = ORIENTED_EDGE('',*,*,#56009,.T.); +#57037 = ORIENTED_EDGE('',*,*,#57020,.T.); +#57038 = ORIENTED_EDGE('',*,*,#56111,.F.); +#57039 = ORIENTED_EDGE('',*,*,#57040,.F.); +#57040 = EDGE_CURVE('',#56002,#56104,#57041,.T.); +#57041 = LINE('',#57042,#57043); +#57042 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583)); +#57043 = VECTOR('',#57044,1.); +#57044 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57045 = CYLINDRICAL_SURFACE('',#57046,0.25); +#57046 = AXIS2_PLACEMENT_3D('',#57047,#57048,#57049); +#57047 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#57048 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57049 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#57050 = ADVANCED_FACE('',(#57051),#57057,.F.); +#57051 = FACE_BOUND('',#57052,.F.); +#57052 = EDGE_LOOP('',(#57053,#57054,#57055,#57056)); +#57053 = ORIENTED_EDGE('',*,*,#56085,.T.); +#57054 = ORIENTED_EDGE('',*,*,#56103,.T.); +#57055 = ORIENTED_EDGE('',*,*,#57040,.F.); +#57056 = ORIENTED_EDGE('',*,*,#56001,.F.); +#57057 = PLANE('',#57058); +#57058 = AXIS2_PLACEMENT_3D('',#57059,#57060,#57061); +#57059 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#57060 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012) + ); +#57061 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#57062 = ADVANCED_FACE('',(#57063),#57074,.T.); +#57063 = FACE_BOUND('',#57064,.T.); +#57064 = EDGE_LOOP('',(#57065,#57066,#57067,#57068)); +#57065 = ORIENTED_EDGE('',*,*,#56263,.T.); +#57066 = ORIENTED_EDGE('',*,*,#56513,.T.); +#57067 = ORIENTED_EDGE('',*,*,#56372,.F.); +#57068 = ORIENTED_EDGE('',*,*,#57069,.F.); +#57069 = EDGE_CURVE('',#56256,#56365,#57070,.T.); +#57070 = LINE('',#57071,#57072); +#57071 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417)); +#57072 = VECTOR('',#57073,1.); +#57073 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57074 = CYLINDRICAL_SURFACE('',#57075,0.25); +#57075 = AXIS2_PLACEMENT_3D('',#57076,#57077,#57078); +#57076 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#57077 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57078 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#57079 = ADVANCED_FACE('',(#57080),#57091,.F.); +#57080 = FACE_BOUND('',#57081,.F.); +#57081 = EDGE_LOOP('',(#57082,#57088,#57089,#57090)); +#57082 = ORIENTED_EDGE('',*,*,#57083,.T.); +#57083 = EDGE_CURVE('',#56247,#56356,#57084,.T.); +#57084 = LINE('',#57085,#57086); +#57085 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#57086 = VECTOR('',#57087,1.); +#57087 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57088 = ORIENTED_EDGE('',*,*,#56364,.T.); +#57089 = ORIENTED_EDGE('',*,*,#57069,.F.); +#57090 = ORIENTED_EDGE('',*,*,#56255,.F.); +#57091 = PLANE('',#57092); +#57092 = AXIS2_PLACEMENT_3D('',#57093,#57094,#57095); +#57093 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#57094 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#57095 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#57096 = ADVANCED_FACE('',(#57097),#57108,.F.); +#57097 = FACE_BOUND('',#57098,.F.); +#57098 = EDGE_LOOP('',(#57099,#57105,#57106,#57107)); +#57099 = ORIENTED_EDGE('',*,*,#57100,.T.); +#57100 = EDGE_CURVE('',#56239,#56348,#57101,.T.); +#57101 = LINE('',#57102,#57103); +#57102 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15)); +#57103 = VECTOR('',#57104,1.); +#57104 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57105 = ORIENTED_EDGE('',*,*,#56355,.T.); +#57106 = ORIENTED_EDGE('',*,*,#57083,.F.); +#57107 = ORIENTED_EDGE('',*,*,#56246,.F.); +#57108 = CYLINDRICAL_SURFACE('',#57109,0.1); +#57109 = AXIS2_PLACEMENT_3D('',#57110,#57111,#57112); +#57110 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#57111 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57112 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#57113 = ADVANCED_FACE('',(#57114),#57125,.F.); +#57114 = FACE_BOUND('',#57115,.F.); +#57115 = EDGE_LOOP('',(#57116,#57122,#57123,#57124)); +#57116 = ORIENTED_EDGE('',*,*,#57117,.T.); +#57117 = EDGE_CURVE('',#56231,#56340,#57118,.T.); +#57118 = LINE('',#57119,#57120); +#57119 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#57120 = VECTOR('',#57121,1.); +#57121 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57122 = ORIENTED_EDGE('',*,*,#56347,.T.); +#57123 = ORIENTED_EDGE('',*,*,#57100,.F.); +#57124 = ORIENTED_EDGE('',*,*,#56238,.F.); +#57125 = PLANE('',#57126); +#57126 = AXIS2_PLACEMENT_3D('',#57127,#57128,#57129); +#57127 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#57128 = DIRECTION('',(0.,0.,-1.)); +#57129 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#57130 = ADVANCED_FACE('',(#57131),#57142,.F.); +#57131 = FACE_BOUND('',#57132,.F.); +#57132 = EDGE_LOOP('',(#57133,#57139,#57140,#57141)); +#57133 = ORIENTED_EDGE('',*,*,#57134,.T.); +#57134 = EDGE_CURVE('',#56223,#56332,#57135,.T.); +#57135 = LINE('',#57136,#57137); +#57136 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#57137 = VECTOR('',#57138,1.); +#57138 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57139 = ORIENTED_EDGE('',*,*,#56339,.T.); +#57140 = ORIENTED_EDGE('',*,*,#57117,.F.); +#57141 = ORIENTED_EDGE('',*,*,#56230,.F.); +#57142 = PLANE('',#57143); +#57143 = AXIS2_PLACEMENT_3D('',#57144,#57145,#57146); +#57144 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#57145 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57146 = DIRECTION('',(0.,0.,1.)); +#57147 = ADVANCED_FACE('',(#57148),#57159,.F.); +#57148 = FACE_BOUND('',#57149,.F.); +#57149 = EDGE_LOOP('',(#57150,#57156,#57157,#57158)); +#57150 = ORIENTED_EDGE('',*,*,#57151,.T.); +#57151 = EDGE_CURVE('',#56214,#56323,#57152,.T.); +#57152 = LINE('',#57153,#57154); +#57153 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#57154 = VECTOR('',#57155,1.); +#57155 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57156 = ORIENTED_EDGE('',*,*,#56331,.T.); +#57157 = ORIENTED_EDGE('',*,*,#57134,.F.); +#57158 = ORIENTED_EDGE('',*,*,#56222,.F.); +#57159 = PLANE('',#57160); +#57160 = AXIS2_PLACEMENT_3D('',#57161,#57162,#57163); +#57161 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#57162 = DIRECTION('',(0.,0.,1.)); +#57163 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#57164 = ADVANCED_FACE('',(#57165),#57176,.T.); +#57165 = FACE_BOUND('',#57166,.T.); +#57166 = EDGE_LOOP('',(#57167,#57168,#57169,#57170)); +#57167 = ORIENTED_EDGE('',*,*,#56213,.T.); +#57168 = ORIENTED_EDGE('',*,*,#57151,.T.); +#57169 = ORIENTED_EDGE('',*,*,#56322,.F.); +#57170 = ORIENTED_EDGE('',*,*,#57171,.F.); +#57171 = EDGE_CURVE('',#56206,#56315,#57172,.T.); +#57172 = LINE('',#57173,#57174); +#57173 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583)); +#57174 = VECTOR('',#57175,1.); +#57175 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57176 = CYLINDRICAL_SURFACE('',#57177,0.25); +#57177 = AXIS2_PLACEMENT_3D('',#57178,#57179,#57180); +#57178 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#57179 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57180 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#57181 = ADVANCED_FACE('',(#57182),#57188,.F.); +#57182 = FACE_BOUND('',#57183,.F.); +#57183 = EDGE_LOOP('',(#57184,#57185,#57186,#57187)); +#57184 = ORIENTED_EDGE('',*,*,#56296,.T.); +#57185 = ORIENTED_EDGE('',*,*,#56314,.T.); +#57186 = ORIENTED_EDGE('',*,*,#57171,.F.); +#57187 = ORIENTED_EDGE('',*,*,#56205,.F.); +#57188 = PLANE('',#57189); +#57189 = AXIS2_PLACEMENT_3D('',#57190,#57191,#57192); +#57190 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#57191 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012) + ); +#57192 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#57193 = ADVANCED_FACE('',(#57194),#57197,.F.); +#57194 = FACE_BOUND('',#57195,.T.); +#57195 = EDGE_LOOP('',(#57196)); +#57196 = ORIENTED_EDGE('',*,*,#56479,.F.); +#57197 = PLANE('',#57198); +#57198 = AXIS2_PLACEMENT_3D('',#57199,#57200,#57201); +#57199 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55)); +#57200 = DIRECTION('',(0.,0.,-1.)); +#57201 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#57206)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#57203,#57204,#57205)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#57203 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#57204 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#57205 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#57206 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#57203, + 'distance_accuracy_value','confusion accuracy'); +#57207 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#57208,#57210); +#57208 = ( REPRESENTATION_RELATIONSHIP('','',#54132,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#57209) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#57209 = ITEM_DEFINED_TRANSFORMATION('','',#11,#203); +#57210 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #57211); +#57211 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('48','U4','',#5,#54127,$); +#57212 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#54129)); +#57213 = SHAPE_DEFINITION_REPRESENTATION(#57214,#57220); +#57214 = PRODUCT_DEFINITION_SHAPE('','',#57215); +#57215 = PRODUCT_DEFINITION('design','',#57216,#57219); +#57216 = PRODUCT_DEFINITION_FORMATION('','',#57217); +#57217 = PRODUCT('sandtable-controller_PCB','sandtable-controller_PCB', + '',(#57218)); +#57218 = PRODUCT_CONTEXT('',#2,'mechanical'); +#57219 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#57220 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#57221),#60948); +#57221 = MANIFOLD_SOLID_BREP('',#57222); +#57222 = CLOSED_SHELL('',(#57223,#57263,#57294,#57325,#58323,#59321, + #59333,#59350,#59372,#59389,#59406,#59418,#59435,#59457,#59474, + #59491,#59503,#59520,#59542,#59559,#59576,#59588,#59610,#59627, + #59644,#59656,#59673,#59690,#59707,#59724,#59741,#59758,#59775, + #59792,#59809,#59826,#59843,#59860,#59877,#59899,#59916,#59933, + #59945,#59962,#59984,#60001,#60018,#60030,#60052,#60069,#60086, + #60098,#60120,#60137,#60154,#60166,#60183,#60200,#60217,#60234, + #60251,#60268,#60285,#60302,#60319,#60336,#60353,#60370,#60387, + #60404,#60421,#60438,#60455,#60472,#60489,#60506,#60523,#60540, + #60557,#60574,#60591,#60608,#60625,#60642,#60659,#60676,#60693, + #60710,#60727,#60744,#60761,#60778,#60795,#60812,#60829,#60846, + #60863,#60880,#60897,#60914,#60931)); +#57223 = ADVANCED_FACE('',(#57224),#57258,.T.); +#57224 = FACE_BOUND('',#57225,.T.); +#57225 = EDGE_LOOP('',(#57226,#57236,#57244,#57252)); +#57226 = ORIENTED_EDGE('',*,*,#57227,.T.); +#57227 = EDGE_CURVE('',#57228,#57230,#57232,.T.); +#57228 = VERTEX_POINT('',#57229); +#57229 = CARTESIAN_POINT('',(180.,-163.34,0.)); +#57230 = VERTEX_POINT('',#57231); +#57231 = CARTESIAN_POINT('',(180.,-163.34,1.51)); +#57232 = LINE('',#57233,#57234); +#57233 = CARTESIAN_POINT('',(180.,-163.34,0.)); +#57234 = VECTOR('',#57235,1.); +#57235 = DIRECTION('',(0.,0.,1.)); +#57236 = ORIENTED_EDGE('',*,*,#57237,.T.); +#57237 = EDGE_CURVE('',#57230,#57238,#57240,.T.); +#57238 = VERTEX_POINT('',#57239); +#57239 = CARTESIAN_POINT('',(100.,-163.34,1.51)); +#57240 = LINE('',#57241,#57242); +#57241 = CARTESIAN_POINT('',(180.,-163.34,1.51)); +#57242 = VECTOR('',#57243,1.); +#57243 = DIRECTION('',(-1.,0.,0.)); +#57244 = ORIENTED_EDGE('',*,*,#57245,.F.); +#57245 = EDGE_CURVE('',#57246,#57238,#57248,.T.); +#57246 = VERTEX_POINT('',#57247); +#57247 = CARTESIAN_POINT('',(100.,-163.34,0.)); +#57248 = LINE('',#57249,#57250); +#57249 = CARTESIAN_POINT('',(100.,-163.34,0.)); +#57250 = VECTOR('',#57251,1.); +#57251 = DIRECTION('',(0.,0.,1.)); +#57252 = ORIENTED_EDGE('',*,*,#57253,.F.); +#57253 = EDGE_CURVE('',#57228,#57246,#57254,.T.); +#57254 = LINE('',#57255,#57256); +#57255 = CARTESIAN_POINT('',(180.,-163.34,0.)); +#57256 = VECTOR('',#57257,1.); +#57257 = DIRECTION('',(-1.,0.,0.)); +#57258 = PLANE('',#57259); +#57259 = AXIS2_PLACEMENT_3D('',#57260,#57261,#57262); +#57260 = CARTESIAN_POINT('',(180.,-163.34,0.)); +#57261 = DIRECTION('',(0.,-1.,0.)); +#57262 = DIRECTION('',(-1.,0.,0.)); +#57263 = ADVANCED_FACE('',(#57264),#57289,.T.); +#57264 = FACE_BOUND('',#57265,.T.); +#57265 = EDGE_LOOP('',(#57266,#57276,#57282,#57283)); +#57266 = ORIENTED_EDGE('',*,*,#57267,.T.); +#57267 = EDGE_CURVE('',#57268,#57270,#57272,.T.); +#57268 = VERTEX_POINT('',#57269); +#57269 = CARTESIAN_POINT('',(180.,-100.,0.)); +#57270 = VERTEX_POINT('',#57271); +#57271 = CARTESIAN_POINT('',(180.,-100.,1.51)); +#57272 = LINE('',#57273,#57274); +#57273 = CARTESIAN_POINT('',(180.,-100.,0.)); +#57274 = VECTOR('',#57275,1.); +#57275 = DIRECTION('',(0.,0.,1.)); +#57276 = ORIENTED_EDGE('',*,*,#57277,.T.); +#57277 = EDGE_CURVE('',#57270,#57230,#57278,.T.); +#57278 = LINE('',#57279,#57280); +#57279 = CARTESIAN_POINT('',(180.,-100.,1.51)); +#57280 = VECTOR('',#57281,1.); +#57281 = DIRECTION('',(0.,-1.,0.)); +#57282 = ORIENTED_EDGE('',*,*,#57227,.F.); +#57283 = ORIENTED_EDGE('',*,*,#57284,.F.); +#57284 = EDGE_CURVE('',#57268,#57228,#57285,.T.); +#57285 = LINE('',#57286,#57287); +#57286 = CARTESIAN_POINT('',(180.,-100.,0.)); +#57287 = VECTOR('',#57288,1.); +#57288 = DIRECTION('',(0.,-1.,0.)); +#57289 = PLANE('',#57290); +#57290 = AXIS2_PLACEMENT_3D('',#57291,#57292,#57293); +#57291 = CARTESIAN_POINT('',(180.,-100.,0.)); +#57292 = DIRECTION('',(1.,0.,-0.)); +#57293 = DIRECTION('',(0.,-1.,0.)); +#57294 = ADVANCED_FACE('',(#57295),#57320,.T.); +#57295 = FACE_BOUND('',#57296,.T.); +#57296 = EDGE_LOOP('',(#57297,#57298,#57306,#57314)); +#57297 = ORIENTED_EDGE('',*,*,#57245,.T.); +#57298 = ORIENTED_EDGE('',*,*,#57299,.T.); +#57299 = EDGE_CURVE('',#57238,#57300,#57302,.T.); +#57300 = VERTEX_POINT('',#57301); +#57301 = CARTESIAN_POINT('',(100.,-100.,1.51)); +#57302 = LINE('',#57303,#57304); +#57303 = CARTESIAN_POINT('',(100.,-163.34,1.51)); +#57304 = VECTOR('',#57305,1.); +#57305 = DIRECTION('',(0.,1.,0.)); +#57306 = ORIENTED_EDGE('',*,*,#57307,.F.); +#57307 = EDGE_CURVE('',#57308,#57300,#57310,.T.); +#57308 = VERTEX_POINT('',#57309); +#57309 = CARTESIAN_POINT('',(100.,-100.,0.)); +#57310 = LINE('',#57311,#57312); +#57311 = CARTESIAN_POINT('',(100.,-100.,0.)); +#57312 = VECTOR('',#57313,1.); +#57313 = DIRECTION('',(0.,0.,1.)); +#57314 = ORIENTED_EDGE('',*,*,#57315,.F.); +#57315 = EDGE_CURVE('',#57246,#57308,#57316,.T.); +#57316 = LINE('',#57317,#57318); +#57317 = CARTESIAN_POINT('',(100.,-163.34,0.)); +#57318 = VECTOR('',#57319,1.); +#57319 = DIRECTION('',(0.,1.,0.)); +#57320 = PLANE('',#57321); +#57321 = AXIS2_PLACEMENT_3D('',#57322,#57323,#57324); +#57322 = CARTESIAN_POINT('',(100.,-163.34,0.)); +#57323 = DIRECTION('',(-1.,0.,0.)); +#57324 = DIRECTION('',(0.,1.,0.)); +#57325 = ADVANCED_FACE('',(#57326,#57337,#57348,#57384,#57395,#57431, + #57442,#57478,#57514,#57525,#57536,#57547,#57558,#57569,#57580, + #57591,#57602,#57613,#57624,#57635,#57646,#57657,#57693,#57704, + #57740,#57776,#57812,#57823,#57834,#57845,#57856,#57867,#57878, + #57889,#57900,#57911,#57922,#57933,#57944,#57955,#57966,#57977, + #57988,#57999,#58010,#58021,#58032,#58043,#58054,#58065,#58076, + #58087,#58098,#58109,#58120,#58131,#58142,#58153,#58164,#58175, + #58186,#58197,#58208,#58219,#58230,#58241,#58252,#58263,#58274, + #58285,#58296,#58307),#58318,.F.); +#57326 = FACE_BOUND('',#57327,.F.); +#57327 = EDGE_LOOP('',(#57328,#57329,#57330,#57336)); +#57328 = ORIENTED_EDGE('',*,*,#57253,.F.); +#57329 = ORIENTED_EDGE('',*,*,#57284,.F.); +#57330 = ORIENTED_EDGE('',*,*,#57331,.F.); +#57331 = EDGE_CURVE('',#57308,#57268,#57332,.T.); +#57332 = LINE('',#57333,#57334); +#57333 = CARTESIAN_POINT('',(100.,-100.,0.)); +#57334 = VECTOR('',#57335,1.); +#57335 = DIRECTION('',(1.,0.,0.)); +#57336 = ORIENTED_EDGE('',*,*,#57315,.F.); +#57337 = FACE_BOUND('',#57338,.F.); +#57338 = EDGE_LOOP('',(#57339)); +#57339 = ORIENTED_EDGE('',*,*,#57340,.T.); +#57340 = EDGE_CURVE('',#57341,#57341,#57343,.T.); +#57341 = VERTEX_POINT('',#57342); +#57342 = CARTESIAN_POINT('',(113.97,-157.4,0.)); +#57343 = CIRCLE('',#57344,1.6); +#57344 = AXIS2_PLACEMENT_3D('',#57345,#57346,#57347); +#57345 = CARTESIAN_POINT('',(113.97,-155.8,0.)); +#57346 = DIRECTION('',(-0.,0.,-1.)); +#57347 = DIRECTION('',(-0.,-1.,0.)); +#57348 = FACE_BOUND('',#57349,.F.); +#57349 = EDGE_LOOP('',(#57350,#57361,#57369,#57378)); +#57350 = ORIENTED_EDGE('',*,*,#57351,.T.); +#57351 = EDGE_CURVE('',#57352,#57354,#57356,.T.); +#57352 = VERTEX_POINT('',#57353); +#57353 = CARTESIAN_POINT('',(102.05,-148.62,0.)); +#57354 = VERTEX_POINT('',#57355); +#57355 = CARTESIAN_POINT('',(102.05,-148.02,0.)); +#57356 = CIRCLE('',#57357,0.3); +#57357 = AXIS2_PLACEMENT_3D('',#57358,#57359,#57360); +#57358 = CARTESIAN_POINT('',(102.05,-148.32,0.)); +#57359 = DIRECTION('',(-0.,0.,-1.)); +#57360 = DIRECTION('',(0.,1.,0.)); +#57361 = ORIENTED_EDGE('',*,*,#57362,.T.); +#57362 = EDGE_CURVE('',#57354,#57363,#57365,.T.); +#57363 = VERTEX_POINT('',#57364); +#57364 = CARTESIAN_POINT('',(102.65,-148.02,0.)); +#57365 = LINE('',#57366,#57367); +#57366 = CARTESIAN_POINT('',(51.325,-148.02,0.)); +#57367 = VECTOR('',#57368,1.); +#57368 = DIRECTION('',(1.,0.,-0.)); +#57369 = ORIENTED_EDGE('',*,*,#57370,.T.); +#57370 = EDGE_CURVE('',#57363,#57371,#57373,.T.); +#57371 = VERTEX_POINT('',#57372); +#57372 = CARTESIAN_POINT('',(102.65,-148.62,0.)); +#57373 = CIRCLE('',#57374,0.3); +#57374 = AXIS2_PLACEMENT_3D('',#57375,#57376,#57377); +#57375 = CARTESIAN_POINT('',(102.65,-148.32,0.)); +#57376 = DIRECTION('',(-0.,0.,-1.)); +#57377 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#57378 = ORIENTED_EDGE('',*,*,#57379,.T.); +#57379 = EDGE_CURVE('',#57371,#57352,#57380,.T.); +#57380 = LINE('',#57381,#57382); +#57381 = CARTESIAN_POINT('',(51.025,-148.62,0.)); +#57382 = VECTOR('',#57383,1.); +#57383 = DIRECTION('',(-1.,0.,0.)); +#57384 = FACE_BOUND('',#57385,.F.); +#57385 = EDGE_LOOP('',(#57386)); +#57386 = ORIENTED_EDGE('',*,*,#57387,.T.); +#57387 = EDGE_CURVE('',#57388,#57388,#57390,.T.); +#57388 = VERTEX_POINT('',#57389); +#57389 = CARTESIAN_POINT('',(106.,-147.215,0.)); +#57390 = CIRCLE('',#57391,0.325); +#57391 = AXIS2_PLACEMENT_3D('',#57392,#57393,#57394); +#57392 = CARTESIAN_POINT('',(106.,-146.89,0.)); +#57393 = DIRECTION('',(-0.,0.,-1.)); +#57394 = DIRECTION('',(-0.,-1.,0.)); +#57395 = FACE_BOUND('',#57396,.F.); +#57396 = EDGE_LOOP('',(#57397,#57408,#57416,#57425)); +#57397 = ORIENTED_EDGE('',*,*,#57398,.T.); +#57398 = EDGE_CURVE('',#57399,#57401,#57403,.T.); +#57399 = VERTEX_POINT('',#57400); +#57400 = CARTESIAN_POINT('',(105.98,-148.62,0.)); +#57401 = VERTEX_POINT('',#57402); +#57402 = CARTESIAN_POINT('',(105.98,-148.02,0.)); +#57403 = CIRCLE('',#57404,0.3); +#57404 = AXIS2_PLACEMENT_3D('',#57405,#57406,#57407); +#57405 = CARTESIAN_POINT('',(105.98,-148.32,0.)); +#57406 = DIRECTION('',(-0.,0.,-1.)); +#57407 = DIRECTION('',(0.,1.,0.)); +#57408 = ORIENTED_EDGE('',*,*,#57409,.T.); +#57409 = EDGE_CURVE('',#57401,#57410,#57412,.T.); +#57410 = VERTEX_POINT('',#57411); +#57411 = CARTESIAN_POINT('',(107.08,-148.02,0.)); +#57412 = LINE('',#57413,#57414); +#57413 = CARTESIAN_POINT('',(53.54,-148.02,0.)); +#57414 = VECTOR('',#57415,1.); +#57415 = DIRECTION('',(1.,0.,-0.)); +#57416 = ORIENTED_EDGE('',*,*,#57417,.T.); +#57417 = EDGE_CURVE('',#57410,#57418,#57420,.T.); +#57418 = VERTEX_POINT('',#57419); +#57419 = CARTESIAN_POINT('',(107.08,-148.62,0.)); +#57420 = CIRCLE('',#57421,0.3); +#57421 = AXIS2_PLACEMENT_3D('',#57422,#57423,#57424); +#57422 = CARTESIAN_POINT('',(107.08,-148.32,0.)); +#57423 = DIRECTION('',(-0.,0.,-1.)); +#57424 = DIRECTION('',(-0.,-1.,0.)); +#57425 = ORIENTED_EDGE('',*,*,#57426,.T.); +#57426 = EDGE_CURVE('',#57418,#57399,#57427,.T.); +#57427 = LINE('',#57428,#57429); +#57428 = CARTESIAN_POINT('',(52.99,-148.62,0.)); +#57429 = VECTOR('',#57430,1.); +#57430 = DIRECTION('',(-1.,0.,0.)); +#57431 = FACE_BOUND('',#57432,.F.); +#57432 = EDGE_LOOP('',(#57433)); +#57433 = ORIENTED_EDGE('',*,*,#57434,.T.); +#57434 = EDGE_CURVE('',#57435,#57435,#57437,.T.); +#57435 = VERTEX_POINT('',#57436); +#57436 = CARTESIAN_POINT('',(106.,-141.435,0.)); +#57437 = CIRCLE('',#57438,0.325); +#57438 = AXIS2_PLACEMENT_3D('',#57439,#57440,#57441); +#57439 = CARTESIAN_POINT('',(106.,-141.11,0.)); +#57440 = DIRECTION('',(-0.,0.,-1.)); +#57441 = DIRECTION('',(-0.,-1.,0.)); +#57442 = FACE_BOUND('',#57443,.F.); +#57443 = EDGE_LOOP('',(#57444,#57455,#57463,#57472)); +#57444 = ORIENTED_EDGE('',*,*,#57445,.T.); +#57445 = EDGE_CURVE('',#57446,#57448,#57450,.T.); +#57446 = VERTEX_POINT('',#57447); +#57447 = CARTESIAN_POINT('',(102.05,-139.98,0.)); +#57448 = VERTEX_POINT('',#57449); +#57449 = CARTESIAN_POINT('',(102.05,-139.38,0.)); +#57450 = CIRCLE('',#57451,0.3); +#57451 = AXIS2_PLACEMENT_3D('',#57452,#57453,#57454); +#57452 = CARTESIAN_POINT('',(102.05,-139.68,0.)); +#57453 = DIRECTION('',(-0.,0.,-1.)); +#57454 = DIRECTION('',(0.,1.,0.)); +#57455 = ORIENTED_EDGE('',*,*,#57456,.T.); +#57456 = EDGE_CURVE('',#57448,#57457,#57459,.T.); +#57457 = VERTEX_POINT('',#57458); +#57458 = CARTESIAN_POINT('',(102.65,-139.38,0.)); +#57459 = LINE('',#57460,#57461); +#57460 = CARTESIAN_POINT('',(51.325,-139.38,0.)); +#57461 = VECTOR('',#57462,1.); +#57462 = DIRECTION('',(1.,0.,-0.)); +#57463 = ORIENTED_EDGE('',*,*,#57464,.T.); +#57464 = EDGE_CURVE('',#57457,#57465,#57467,.T.); +#57465 = VERTEX_POINT('',#57466); +#57466 = CARTESIAN_POINT('',(102.65,-139.98,0.)); +#57467 = CIRCLE('',#57468,0.3); +#57468 = AXIS2_PLACEMENT_3D('',#57469,#57470,#57471); +#57469 = CARTESIAN_POINT('',(102.65,-139.68,0.)); +#57470 = DIRECTION('',(-0.,0.,-1.)); +#57471 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#57472 = ORIENTED_EDGE('',*,*,#57473,.T.); +#57473 = EDGE_CURVE('',#57465,#57446,#57474,.T.); +#57474 = LINE('',#57475,#57476); +#57475 = CARTESIAN_POINT('',(51.025,-139.98,0.)); +#57476 = VECTOR('',#57477,1.); +#57477 = DIRECTION('',(-1.,0.,0.)); +#57478 = FACE_BOUND('',#57479,.F.); +#57479 = EDGE_LOOP('',(#57480,#57491,#57499,#57508)); +#57480 = ORIENTED_EDGE('',*,*,#57481,.T.); +#57481 = EDGE_CURVE('',#57482,#57484,#57486,.T.); +#57482 = VERTEX_POINT('',#57483); +#57483 = CARTESIAN_POINT('',(105.98,-139.98,0.)); +#57484 = VERTEX_POINT('',#57485); +#57485 = CARTESIAN_POINT('',(105.98,-139.38,0.)); +#57486 = CIRCLE('',#57487,0.3); +#57487 = AXIS2_PLACEMENT_3D('',#57488,#57489,#57490); +#57488 = CARTESIAN_POINT('',(105.98,-139.68,0.)); +#57489 = DIRECTION('',(-0.,0.,-1.)); +#57490 = DIRECTION('',(0.,1.,0.)); +#57491 = ORIENTED_EDGE('',*,*,#57492,.T.); +#57492 = EDGE_CURVE('',#57484,#57493,#57495,.T.); +#57493 = VERTEX_POINT('',#57494); +#57494 = CARTESIAN_POINT('',(107.08,-139.38,0.)); +#57495 = LINE('',#57496,#57497); +#57496 = CARTESIAN_POINT('',(53.54,-139.38,0.)); +#57497 = VECTOR('',#57498,1.); +#57498 = DIRECTION('',(1.,0.,-0.)); +#57499 = ORIENTED_EDGE('',*,*,#57500,.T.); +#57500 = EDGE_CURVE('',#57493,#57501,#57503,.T.); +#57501 = VERTEX_POINT('',#57502); +#57502 = CARTESIAN_POINT('',(107.08,-139.98,0.)); +#57503 = CIRCLE('',#57504,0.3); +#57504 = AXIS2_PLACEMENT_3D('',#57505,#57506,#57507); +#57505 = CARTESIAN_POINT('',(107.08,-139.68,0.)); +#57506 = DIRECTION('',(-0.,0.,-1.)); +#57507 = DIRECTION('',(-0.,-1.,0.)); +#57508 = ORIENTED_EDGE('',*,*,#57509,.T.); +#57509 = EDGE_CURVE('',#57501,#57482,#57510,.T.); +#57510 = LINE('',#57511,#57512); +#57511 = CARTESIAN_POINT('',(52.99,-139.98,0.)); +#57512 = VECTOR('',#57513,1.); +#57513 = DIRECTION('',(-1.,0.,0.)); +#57514 = FACE_BOUND('',#57515,.F.); +#57515 = EDGE_LOOP('',(#57516)); +#57516 = ORIENTED_EDGE('',*,*,#57517,.T.); +#57517 = EDGE_CURVE('',#57518,#57518,#57520,.T.); +#57518 = VERTEX_POINT('',#57519); +#57519 = CARTESIAN_POINT('',(118.,-135.5,0.)); +#57520 = CIRCLE('',#57521,0.5); +#57521 = AXIS2_PLACEMENT_3D('',#57522,#57523,#57524); +#57522 = CARTESIAN_POINT('',(118.,-135.,0.)); +#57523 = DIRECTION('',(-0.,0.,-1.)); +#57524 = DIRECTION('',(-0.,-1.,0.)); +#57525 = FACE_BOUND('',#57526,.F.); +#57526 = EDGE_LOOP('',(#57527)); +#57527 = ORIENTED_EDGE('',*,*,#57528,.T.); +#57528 = EDGE_CURVE('',#57529,#57529,#57531,.T.); +#57529 = VERTEX_POINT('',#57530); +#57530 = CARTESIAN_POINT('',(120.54,-135.5,0.)); +#57531 = CIRCLE('',#57532,0.5); +#57532 = AXIS2_PLACEMENT_3D('',#57533,#57534,#57535); +#57533 = CARTESIAN_POINT('',(120.54,-135.,0.)); +#57534 = DIRECTION('',(-0.,0.,-1.)); +#57535 = DIRECTION('',(-0.,-1.,0.)); +#57536 = FACE_BOUND('',#57537,.F.); +#57537 = EDGE_LOOP('',(#57538)); +#57538 = ORIENTED_EDGE('',*,*,#57539,.T.); +#57539 = EDGE_CURVE('',#57540,#57540,#57542,.T.); +#57540 = VERTEX_POINT('',#57541); +#57541 = CARTESIAN_POINT('',(123.08,-135.5,0.)); +#57542 = CIRCLE('',#57543,0.5); +#57543 = AXIS2_PLACEMENT_3D('',#57544,#57545,#57546); +#57544 = CARTESIAN_POINT('',(123.08,-135.,0.)); +#57545 = DIRECTION('',(-0.,0.,-1.)); +#57546 = DIRECTION('',(-0.,-1.,0.)); +#57547 = FACE_BOUND('',#57548,.F.); +#57548 = EDGE_LOOP('',(#57549)); +#57549 = ORIENTED_EDGE('',*,*,#57550,.T.); +#57550 = EDGE_CURVE('',#57551,#57551,#57553,.T.); +#57551 = VERTEX_POINT('',#57552); +#57552 = CARTESIAN_POINT('',(177.5,-160.12,0.)); +#57553 = CIRCLE('',#57554,0.5); +#57554 = AXIS2_PLACEMENT_3D('',#57555,#57556,#57557); +#57555 = CARTESIAN_POINT('',(177.5,-159.62,0.)); +#57556 = DIRECTION('',(-0.,0.,-1.)); +#57557 = DIRECTION('',(-0.,-1.,0.)); +#57558 = FACE_BOUND('',#57559,.F.); +#57559 = EDGE_LOOP('',(#57560)); +#57560 = ORIENTED_EDGE('',*,*,#57561,.T.); +#57561 = EDGE_CURVE('',#57562,#57562,#57564,.T.); +#57562 = VERTEX_POINT('',#57563); +#57563 = CARTESIAN_POINT('',(177.5,-157.58,0.)); +#57564 = CIRCLE('',#57565,0.5); +#57565 = AXIS2_PLACEMENT_3D('',#57566,#57567,#57568); +#57566 = CARTESIAN_POINT('',(177.5,-157.08,0.)); +#57567 = DIRECTION('',(-0.,0.,-1.)); +#57568 = DIRECTION('',(-0.,-1.,0.)); +#57569 = FACE_BOUND('',#57570,.F.); +#57570 = EDGE_LOOP('',(#57571)); +#57571 = ORIENTED_EDGE('',*,*,#57572,.T.); +#57572 = EDGE_CURVE('',#57573,#57573,#57575,.T.); +#57573 = VERTEX_POINT('',#57574); +#57574 = CARTESIAN_POINT('',(177.5,-155.04,0.)); +#57575 = CIRCLE('',#57576,0.5); +#57576 = AXIS2_PLACEMENT_3D('',#57577,#57578,#57579); +#57577 = CARTESIAN_POINT('',(177.5,-154.54,0.)); +#57578 = DIRECTION('',(-0.,0.,-1.)); +#57579 = DIRECTION('',(-0.,-1.,0.)); +#57580 = FACE_BOUND('',#57581,.F.); +#57581 = EDGE_LOOP('',(#57582)); +#57582 = ORIENTED_EDGE('',*,*,#57583,.T.); +#57583 = EDGE_CURVE('',#57584,#57584,#57586,.T.); +#57584 = VERTEX_POINT('',#57585); +#57585 = CARTESIAN_POINT('',(166.04,-152.32,0.)); +#57586 = CIRCLE('',#57587,1.6); +#57587 = AXIS2_PLACEMENT_3D('',#57588,#57589,#57590); +#57588 = CARTESIAN_POINT('',(166.04,-150.72,0.)); +#57589 = DIRECTION('',(-0.,0.,-1.)); +#57590 = DIRECTION('',(-0.,-1.,0.)); +#57591 = FACE_BOUND('',#57592,.F.); +#57592 = EDGE_LOOP('',(#57593)); +#57593 = ORIENTED_EDGE('',*,*,#57594,.T.); +#57594 = EDGE_CURVE('',#57595,#57595,#57597,.T.); +#57595 = VERTEX_POINT('',#57596); +#57596 = CARTESIAN_POINT('',(177.5,-152.5,0.)); +#57597 = CIRCLE('',#57598,0.5); +#57598 = AXIS2_PLACEMENT_3D('',#57599,#57600,#57601); +#57599 = CARTESIAN_POINT('',(177.5,-152.,0.)); +#57600 = DIRECTION('',(-0.,0.,-1.)); +#57601 = DIRECTION('',(-0.,-1.,0.)); +#57602 = FACE_BOUND('',#57603,.F.); +#57603 = EDGE_LOOP('',(#57604)); +#57604 = ORIENTED_EDGE('',*,*,#57605,.T.); +#57605 = EDGE_CURVE('',#57606,#57606,#57608,.T.); +#57606 = VERTEX_POINT('',#57607); +#57607 = CARTESIAN_POINT('',(176.5,-146.175,0.)); +#57608 = CIRCLE('',#57609,0.475); +#57609 = AXIS2_PLACEMENT_3D('',#57610,#57611,#57612); +#57610 = CARTESIAN_POINT('',(176.5,-145.7,0.)); +#57611 = DIRECTION('',(-0.,0.,-1.)); +#57612 = DIRECTION('',(-0.,-1.,0.)); +#57613 = FACE_BOUND('',#57614,.F.); +#57614 = EDGE_LOOP('',(#57615)); +#57615 = ORIENTED_EDGE('',*,*,#57616,.T.); +#57616 = EDGE_CURVE('',#57617,#57617,#57619,.T.); +#57617 = VERTEX_POINT('',#57618); +#57618 = CARTESIAN_POINT('',(176.5,-143.675,0.)); +#57619 = CIRCLE('',#57620,0.475); +#57620 = AXIS2_PLACEMENT_3D('',#57621,#57622,#57623); +#57621 = CARTESIAN_POINT('',(176.5,-143.2,0.)); +#57622 = DIRECTION('',(-0.,0.,-1.)); +#57623 = DIRECTION('',(-0.,-1.,0.)); +#57624 = FACE_BOUND('',#57625,.F.); +#57625 = EDGE_LOOP('',(#57626)); +#57626 = ORIENTED_EDGE('',*,*,#57627,.T.); +#57627 = EDGE_CURVE('',#57628,#57628,#57630,.T.); +#57628 = VERTEX_POINT('',#57629); +#57629 = CARTESIAN_POINT('',(176.5,-141.175,0.)); +#57630 = CIRCLE('',#57631,0.475); +#57631 = AXIS2_PLACEMENT_3D('',#57632,#57633,#57634); +#57632 = CARTESIAN_POINT('',(176.5,-140.7,0.)); +#57633 = DIRECTION('',(-0.,0.,-1.)); +#57634 = DIRECTION('',(-0.,-1.,0.)); +#57635 = FACE_BOUND('',#57636,.F.); +#57636 = EDGE_LOOP('',(#57637)); +#57637 = ORIENTED_EDGE('',*,*,#57638,.T.); +#57638 = EDGE_CURVE('',#57639,#57639,#57641,.T.); +#57639 = VERTEX_POINT('',#57640); +#57640 = CARTESIAN_POINT('',(176.5,-135.075,0.)); +#57641 = CIRCLE('',#57642,0.475); +#57642 = AXIS2_PLACEMENT_3D('',#57643,#57644,#57645); +#57643 = CARTESIAN_POINT('',(176.5,-134.6,0.)); +#57644 = DIRECTION('',(-0.,0.,-1.)); +#57645 = DIRECTION('',(-0.,-1.,0.)); +#57646 = FACE_BOUND('',#57647,.F.); +#57647 = EDGE_LOOP('',(#57648)); +#57648 = ORIENTED_EDGE('',*,*,#57649,.T.); +#57649 = EDGE_CURVE('',#57650,#57650,#57652,.T.); +#57650 = VERTEX_POINT('',#57651); +#57651 = CARTESIAN_POINT('',(176.5,-132.575,0.)); +#57652 = CIRCLE('',#57653,0.475); +#57653 = AXIS2_PLACEMENT_3D('',#57654,#57655,#57656); +#57654 = CARTESIAN_POINT('',(176.5,-132.1,0.)); +#57655 = DIRECTION('',(-0.,0.,-1.)); +#57656 = DIRECTION('',(-0.,-1.,0.)); +#57657 = FACE_BOUND('',#57658,.F.); +#57658 = EDGE_LOOP('',(#57659,#57670,#57678,#57687)); +#57659 = ORIENTED_EDGE('',*,*,#57660,.T.); +#57660 = EDGE_CURVE('',#57661,#57663,#57665,.T.); +#57661 = VERTEX_POINT('',#57662); +#57662 = CARTESIAN_POINT('',(104.55,-130.,0.)); +#57663 = VERTEX_POINT('',#57664); +#57664 = CARTESIAN_POINT('',(104.55,-129.,0.)); +#57665 = CIRCLE('',#57666,0.5); +#57666 = AXIS2_PLACEMENT_3D('',#57667,#57668,#57669); +#57667 = CARTESIAN_POINT('',(104.55,-129.5,0.)); +#57668 = DIRECTION('',(-0.,0.,-1.)); +#57669 = DIRECTION('',(0.,1.,0.)); +#57670 = ORIENTED_EDGE('',*,*,#57671,.T.); +#57671 = EDGE_CURVE('',#57663,#57672,#57674,.T.); +#57672 = VERTEX_POINT('',#57673); +#57673 = CARTESIAN_POINT('',(106.05,-129.,0.)); +#57674 = LINE('',#57675,#57676); +#57675 = CARTESIAN_POINT('',(53.025,-129.,0.)); +#57676 = VECTOR('',#57677,1.); +#57677 = DIRECTION('',(1.,0.,-0.)); +#57678 = ORIENTED_EDGE('',*,*,#57679,.T.); +#57679 = EDGE_CURVE('',#57672,#57680,#57682,.T.); +#57680 = VERTEX_POINT('',#57681); +#57681 = CARTESIAN_POINT('',(106.05,-130.,0.)); +#57682 = CIRCLE('',#57683,0.5); +#57683 = AXIS2_PLACEMENT_3D('',#57684,#57685,#57686); +#57684 = CARTESIAN_POINT('',(106.05,-129.5,0.)); +#57685 = DIRECTION('',(-0.,0.,-1.)); +#57686 = DIRECTION('',(-0.,-1.,0.)); +#57687 = ORIENTED_EDGE('',*,*,#57688,.T.); +#57688 = EDGE_CURVE('',#57680,#57661,#57689,.T.); +#57689 = LINE('',#57690,#57691); +#57690 = CARTESIAN_POINT('',(52.275,-130.,0.)); +#57691 = VECTOR('',#57692,1.); +#57692 = DIRECTION('',(-1.,0.,0.)); +#57693 = FACE_BOUND('',#57694,.F.); +#57694 = EDGE_LOOP('',(#57695)); +#57695 = ORIENTED_EDGE('',*,*,#57696,.T.); +#57696 = EDGE_CURVE('',#57697,#57697,#57699,.T.); +#57697 = VERTEX_POINT('',#57698); +#57698 = CARTESIAN_POINT('',(103.3,-125.8,0.)); +#57699 = CIRCLE('',#57700,0.8); +#57700 = AXIS2_PLACEMENT_3D('',#57701,#57702,#57703); +#57701 = CARTESIAN_POINT('',(103.3,-125.,0.)); +#57702 = DIRECTION('',(-0.,0.,-1.)); +#57703 = DIRECTION('',(-0.,-1.,0.)); +#57704 = FACE_BOUND('',#57705,.F.); +#57705 = EDGE_LOOP('',(#57706,#57717,#57725,#57734)); +#57706 = ORIENTED_EDGE('',*,*,#57707,.T.); +#57707 = EDGE_CURVE('',#57708,#57710,#57712,.T.); +#57708 = VERTEX_POINT('',#57709); +#57709 = CARTESIAN_POINT('',(106.8,-125.65,0.)); +#57710 = VERTEX_POINT('',#57711); +#57711 = CARTESIAN_POINT('',(105.8,-125.65,0.)); +#57712 = CIRCLE('',#57713,0.5); +#57713 = AXIS2_PLACEMENT_3D('',#57714,#57715,#57716); +#57714 = CARTESIAN_POINT('',(106.3,-125.65,0.)); +#57715 = DIRECTION('',(-0.,0.,-1.)); +#57716 = DIRECTION('',(-1.,0.,0.)); +#57717 = ORIENTED_EDGE('',*,*,#57718,.T.); +#57718 = EDGE_CURVE('',#57710,#57719,#57721,.T.); +#57719 = VERTEX_POINT('',#57720); +#57720 = CARTESIAN_POINT('',(105.8,-124.35,0.)); +#57721 = LINE('',#57722,#57723); +#57722 = CARTESIAN_POINT('',(105.8,-62.175,0.)); +#57723 = VECTOR('',#57724,1.); +#57724 = DIRECTION('',(-0.,1.,0.)); +#57725 = ORIENTED_EDGE('',*,*,#57726,.T.); +#57726 = EDGE_CURVE('',#57719,#57727,#57729,.T.); +#57727 = VERTEX_POINT('',#57728); +#57728 = CARTESIAN_POINT('',(106.8,-124.35,0.)); +#57729 = CIRCLE('',#57730,0.5); +#57730 = AXIS2_PLACEMENT_3D('',#57731,#57732,#57733); +#57731 = CARTESIAN_POINT('',(106.3,-124.35,0.)); +#57732 = DIRECTION('',(0.,-0.,-1.)); +#57733 = DIRECTION('',(1.,0.,-0.)); +#57734 = ORIENTED_EDGE('',*,*,#57735,.T.); +#57735 = EDGE_CURVE('',#57727,#57708,#57736,.T.); +#57736 = LINE('',#57737,#57738); +#57737 = CARTESIAN_POINT('',(106.8,-62.825,0.)); +#57738 = VECTOR('',#57739,1.); +#57739 = DIRECTION('',(0.,-1.,0.)); +#57740 = FACE_BOUND('',#57741,.F.); +#57741 = EDGE_LOOP('',(#57742,#57753,#57761,#57770)); +#57742 = ORIENTED_EDGE('',*,*,#57743,.T.); +#57743 = EDGE_CURVE('',#57744,#57746,#57748,.T.); +#57744 = VERTEX_POINT('',#57745); +#57745 = CARTESIAN_POINT('',(112.8,-126.,0.)); +#57746 = VERTEX_POINT('',#57747); +#57747 = CARTESIAN_POINT('',(111.8,-126.,0.)); +#57748 = CIRCLE('',#57749,0.5); +#57749 = AXIS2_PLACEMENT_3D('',#57750,#57751,#57752); +#57750 = CARTESIAN_POINT('',(112.3,-126.,0.)); +#57751 = DIRECTION('',(-0.,0.,-1.)); +#57752 = DIRECTION('',(-1.,0.,0.)); +#57753 = ORIENTED_EDGE('',*,*,#57754,.T.); +#57754 = EDGE_CURVE('',#57746,#57755,#57757,.T.); +#57755 = VERTEX_POINT('',#57756); +#57756 = CARTESIAN_POINT('',(111.8,-124.,0.)); +#57757 = LINE('',#57758,#57759); +#57758 = CARTESIAN_POINT('',(111.8,-62.,0.)); +#57759 = VECTOR('',#57760,1.); +#57760 = DIRECTION('',(-0.,1.,0.)); +#57761 = ORIENTED_EDGE('',*,*,#57762,.T.); +#57762 = EDGE_CURVE('',#57755,#57763,#57765,.T.); +#57763 = VERTEX_POINT('',#57764); +#57764 = CARTESIAN_POINT('',(112.8,-124.,0.)); +#57765 = CIRCLE('',#57766,0.5); +#57766 = AXIS2_PLACEMENT_3D('',#57767,#57768,#57769); +#57767 = CARTESIAN_POINT('',(112.3,-124.,0.)); +#57768 = DIRECTION('',(0.,-0.,-1.)); +#57769 = DIRECTION('',(1.,0.,-0.)); +#57770 = ORIENTED_EDGE('',*,*,#57771,.T.); +#57771 = EDGE_CURVE('',#57763,#57744,#57772,.T.); +#57772 = LINE('',#57773,#57774); +#57773 = CARTESIAN_POINT('',(112.8,-63.,0.)); +#57774 = VECTOR('',#57775,1.); +#57775 = DIRECTION('',(0.,-1.,0.)); +#57776 = FACE_BOUND('',#57777,.F.); +#57777 = EDGE_LOOP('',(#57778,#57789,#57797,#57806)); +#57778 = ORIENTED_EDGE('',*,*,#57779,.T.); +#57779 = EDGE_CURVE('',#57780,#57782,#57784,.T.); +#57780 = VERTEX_POINT('',#57781); +#57781 = CARTESIAN_POINT('',(104.55,-121.,0.)); +#57782 = VERTEX_POINT('',#57783); +#57783 = CARTESIAN_POINT('',(104.55,-120.,0.)); +#57784 = CIRCLE('',#57785,0.5); +#57785 = AXIS2_PLACEMENT_3D('',#57786,#57787,#57788); +#57786 = CARTESIAN_POINT('',(104.55,-120.5,0.)); +#57787 = DIRECTION('',(-0.,0.,-1.)); +#57788 = DIRECTION('',(0.,1.,0.)); +#57789 = ORIENTED_EDGE('',*,*,#57790,.T.); +#57790 = EDGE_CURVE('',#57782,#57791,#57793,.T.); +#57791 = VERTEX_POINT('',#57792); +#57792 = CARTESIAN_POINT('',(106.05,-120.,0.)); +#57793 = LINE('',#57794,#57795); +#57794 = CARTESIAN_POINT('',(53.025,-120.,0.)); +#57795 = VECTOR('',#57796,1.); +#57796 = DIRECTION('',(1.,0.,-0.)); +#57797 = ORIENTED_EDGE('',*,*,#57798,.T.); +#57798 = EDGE_CURVE('',#57791,#57799,#57801,.T.); +#57799 = VERTEX_POINT('',#57800); +#57800 = CARTESIAN_POINT('',(106.05,-121.,0.)); +#57801 = CIRCLE('',#57802,0.5); +#57802 = AXIS2_PLACEMENT_3D('',#57803,#57804,#57805); +#57803 = CARTESIAN_POINT('',(106.05,-120.5,0.)); +#57804 = DIRECTION('',(-0.,0.,-1.)); +#57805 = DIRECTION('',(-0.,-1.,0.)); +#57806 = ORIENTED_EDGE('',*,*,#57807,.T.); +#57807 = EDGE_CURVE('',#57799,#57780,#57808,.T.); +#57808 = LINE('',#57809,#57810); +#57809 = CARTESIAN_POINT('',(52.275,-121.,0.)); +#57810 = VECTOR('',#57811,1.); +#57811 = DIRECTION('',(-1.,0.,0.)); +#57812 = FACE_BOUND('',#57813,.F.); +#57813 = EDGE_LOOP('',(#57814)); +#57814 = ORIENTED_EDGE('',*,*,#57815,.T.); +#57815 = EDGE_CURVE('',#57816,#57816,#57818,.T.); +#57816 = VERTEX_POINT('',#57817); +#57817 = CARTESIAN_POINT('',(104.5,-111.375,0.)); +#57818 = CIRCLE('',#57819,0.475); +#57819 = AXIS2_PLACEMENT_3D('',#57820,#57821,#57822); +#57820 = CARTESIAN_POINT('',(104.5,-110.9,0.)); +#57821 = DIRECTION('',(-0.,0.,-1.)); +#57822 = DIRECTION('',(-0.,-1.,0.)); +#57823 = FACE_BOUND('',#57824,.F.); +#57824 = EDGE_LOOP('',(#57825)); +#57825 = ORIENTED_EDGE('',*,*,#57826,.T.); +#57826 = EDGE_CURVE('',#57827,#57827,#57829,.T.); +#57827 = VERTEX_POINT('',#57828); +#57828 = CARTESIAN_POINT('',(120.32,-115.,0.)); +#57829 = CIRCLE('',#57830,0.4); +#57830 = AXIS2_PLACEMENT_3D('',#57831,#57832,#57833); +#57831 = CARTESIAN_POINT('',(120.32,-114.6,0.)); +#57832 = DIRECTION('',(-0.,0.,-1.)); +#57833 = DIRECTION('',(-0.,-1.,0.)); +#57834 = FACE_BOUND('',#57835,.F.); +#57835 = EDGE_LOOP('',(#57836)); +#57836 = ORIENTED_EDGE('',*,*,#57837,.T.); +#57837 = EDGE_CURVE('',#57838,#57838,#57840,.T.); +#57838 = VERTEX_POINT('',#57839); +#57839 = CARTESIAN_POINT('',(104.5,-108.875,0.)); +#57840 = CIRCLE('',#57841,0.475); +#57841 = AXIS2_PLACEMENT_3D('',#57842,#57843,#57844); +#57842 = CARTESIAN_POINT('',(104.5,-108.4,0.)); +#57843 = DIRECTION('',(-0.,0.,-1.)); +#57844 = DIRECTION('',(-0.,-1.,0.)); +#57845 = FACE_BOUND('',#57846,.F.); +#57846 = EDGE_LOOP('',(#57847)); +#57847 = ORIENTED_EDGE('',*,*,#57848,.T.); +#57848 = EDGE_CURVE('',#57849,#57849,#57851,.T.); +#57849 = VERTEX_POINT('',#57850); +#57850 = CARTESIAN_POINT('',(104.5,-106.375,0.)); +#57851 = CIRCLE('',#57852,0.475); +#57852 = AXIS2_PLACEMENT_3D('',#57853,#57854,#57855); +#57853 = CARTESIAN_POINT('',(104.5,-105.9,0.)); +#57854 = DIRECTION('',(-0.,0.,-1.)); +#57855 = DIRECTION('',(-0.,-1.,0.)); +#57856 = FACE_BOUND('',#57857,.F.); +#57857 = EDGE_LOOP('',(#57858)); +#57858 = ORIENTED_EDGE('',*,*,#57859,.T.); +#57859 = EDGE_CURVE('',#57860,#57860,#57862,.T.); +#57860 = VERTEX_POINT('',#57861); +#57861 = CARTESIAN_POINT('',(104.5,-103.875,0.)); +#57862 = CIRCLE('',#57863,0.475); +#57863 = AXIS2_PLACEMENT_3D('',#57864,#57865,#57866); +#57864 = CARTESIAN_POINT('',(104.5,-103.4,0.)); +#57865 = DIRECTION('',(-0.,0.,-1.)); +#57866 = DIRECTION('',(-0.,-1.,0.)); +#57867 = FACE_BOUND('',#57868,.F.); +#57868 = EDGE_LOOP('',(#57869)); +#57869 = ORIENTED_EDGE('',*,*,#57870,.T.); +#57870 = EDGE_CURVE('',#57871,#57871,#57873,.T.); +#57871 = VERTEX_POINT('',#57872); +#57872 = CARTESIAN_POINT('',(115.24,-109.14,0.)); +#57873 = CIRCLE('',#57874,1.6); +#57874 = AXIS2_PLACEMENT_3D('',#57875,#57876,#57877); +#57875 = CARTESIAN_POINT('',(115.24,-107.54,0.)); +#57876 = DIRECTION('',(-0.,0.,-1.)); +#57877 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#57878 = FACE_BOUND('',#57879,.F.); +#57879 = EDGE_LOOP('',(#57880)); +#57880 = ORIENTED_EDGE('',*,*,#57881,.T.); +#57881 = EDGE_CURVE('',#57882,#57882,#57884,.T.); +#57882 = VERTEX_POINT('',#57883); +#57883 = CARTESIAN_POINT('',(120.32,-102.3,0.)); +#57884 = CIRCLE('',#57885,0.4); +#57885 = AXIS2_PLACEMENT_3D('',#57886,#57887,#57888); +#57886 = CARTESIAN_POINT('',(120.32,-101.9,0.)); +#57887 = DIRECTION('',(-0.,0.,-1.)); +#57888 = DIRECTION('',(-0.,-1.,0.)); +#57889 = FACE_BOUND('',#57890,.F.); +#57890 = EDGE_LOOP('',(#57891)); +#57891 = ORIENTED_EDGE('',*,*,#57892,.T.); +#57892 = EDGE_CURVE('',#57893,#57893,#57895,.T.); +#57893 = VERTEX_POINT('',#57894); +#57894 = CARTESIAN_POINT('',(122.86,-115.,0.)); +#57895 = CIRCLE('',#57896,0.4); +#57896 = AXIS2_PLACEMENT_3D('',#57897,#57898,#57899); +#57897 = CARTESIAN_POINT('',(122.86,-114.6,0.)); +#57898 = DIRECTION('',(-0.,0.,-1.)); +#57899 = DIRECTION('',(-0.,-1.,0.)); +#57900 = FACE_BOUND('',#57901,.F.); +#57901 = EDGE_LOOP('',(#57902)); +#57902 = ORIENTED_EDGE('',*,*,#57903,.T.); +#57903 = EDGE_CURVE('',#57904,#57904,#57906,.T.); +#57904 = VERTEX_POINT('',#57905); +#57905 = CARTESIAN_POINT('',(125.4,-115.,0.)); +#57906 = CIRCLE('',#57907,0.4); +#57907 = AXIS2_PLACEMENT_3D('',#57908,#57909,#57910); +#57908 = CARTESIAN_POINT('',(125.4,-114.6,0.)); +#57909 = DIRECTION('',(-0.,0.,-1.)); +#57910 = DIRECTION('',(-0.,-1.,0.)); +#57911 = FACE_BOUND('',#57912,.F.); +#57912 = EDGE_LOOP('',(#57913)); +#57913 = ORIENTED_EDGE('',*,*,#57914,.T.); +#57914 = EDGE_CURVE('',#57915,#57915,#57917,.T.); +#57915 = VERTEX_POINT('',#57916); +#57916 = CARTESIAN_POINT('',(127.94,-115.,0.)); +#57917 = CIRCLE('',#57918,0.4); +#57918 = AXIS2_PLACEMENT_3D('',#57919,#57920,#57921); +#57919 = CARTESIAN_POINT('',(127.94,-114.6,0.)); +#57920 = DIRECTION('',(-0.,0.,-1.)); +#57921 = DIRECTION('',(-0.,-1.,0.)); +#57922 = FACE_BOUND('',#57923,.F.); +#57923 = EDGE_LOOP('',(#57924)); +#57924 = ORIENTED_EDGE('',*,*,#57925,.T.); +#57925 = EDGE_CURVE('',#57926,#57926,#57928,.T.); +#57926 = VERTEX_POINT('',#57927); +#57927 = CARTESIAN_POINT('',(130.48,-115.,0.)); +#57928 = CIRCLE('',#57929,0.4); +#57929 = AXIS2_PLACEMENT_3D('',#57930,#57931,#57932); +#57930 = CARTESIAN_POINT('',(130.48,-114.6,0.)); +#57931 = DIRECTION('',(-0.,0.,-1.)); +#57932 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#57933 = FACE_BOUND('',#57934,.F.); +#57934 = EDGE_LOOP('',(#57935)); +#57935 = ORIENTED_EDGE('',*,*,#57936,.T.); +#57936 = EDGE_CURVE('',#57937,#57937,#57939,.T.); +#57937 = VERTEX_POINT('',#57938); +#57938 = CARTESIAN_POINT('',(133.02,-115.,0.)); +#57939 = CIRCLE('',#57940,0.4); +#57940 = AXIS2_PLACEMENT_3D('',#57941,#57942,#57943); +#57941 = CARTESIAN_POINT('',(133.02,-114.6,0.)); +#57942 = DIRECTION('',(-0.,0.,-1.)); +#57943 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#57944 = FACE_BOUND('',#57945,.F.); +#57945 = EDGE_LOOP('',(#57946)); +#57946 = ORIENTED_EDGE('',*,*,#57947,.T.); +#57947 = EDGE_CURVE('',#57948,#57948,#57950,.T.); +#57948 = VERTEX_POINT('',#57949); +#57949 = CARTESIAN_POINT('',(135.56,-115.,0.)); +#57950 = CIRCLE('',#57951,0.4); +#57951 = AXIS2_PLACEMENT_3D('',#57952,#57953,#57954); +#57952 = CARTESIAN_POINT('',(135.56,-114.6,0.)); +#57953 = DIRECTION('',(-0.,0.,-1.)); +#57954 = DIRECTION('',(-0.,-1.,0.)); +#57955 = FACE_BOUND('',#57956,.F.); +#57956 = EDGE_LOOP('',(#57957)); +#57957 = ORIENTED_EDGE('',*,*,#57958,.T.); +#57958 = EDGE_CURVE('',#57959,#57959,#57961,.T.); +#57959 = VERTEX_POINT('',#57960); +#57960 = CARTESIAN_POINT('',(138.1,-115.,0.)); +#57961 = CIRCLE('',#57962,0.4); +#57962 = AXIS2_PLACEMENT_3D('',#57963,#57964,#57965); +#57963 = CARTESIAN_POINT('',(138.1,-114.6,0.)); +#57964 = DIRECTION('',(-0.,0.,-1.)); +#57965 = DIRECTION('',(-0.,-1.,0.)); +#57966 = FACE_BOUND('',#57967,.F.); +#57967 = EDGE_LOOP('',(#57968)); +#57968 = ORIENTED_EDGE('',*,*,#57969,.T.); +#57969 = EDGE_CURVE('',#57970,#57970,#57972,.T.); +#57970 = VERTEX_POINT('',#57971); +#57971 = CARTESIAN_POINT('',(122.86,-102.3,0.)); +#57972 = CIRCLE('',#57973,0.4); +#57973 = AXIS2_PLACEMENT_3D('',#57974,#57975,#57976); +#57974 = CARTESIAN_POINT('',(122.86,-101.9,0.)); +#57975 = DIRECTION('',(-0.,0.,-1.)); +#57976 = DIRECTION('',(-0.,-1.,0.)); +#57977 = FACE_BOUND('',#57978,.F.); +#57978 = EDGE_LOOP('',(#57979)); +#57979 = ORIENTED_EDGE('',*,*,#57980,.T.); +#57980 = EDGE_CURVE('',#57981,#57981,#57983,.T.); +#57981 = VERTEX_POINT('',#57982); +#57982 = CARTESIAN_POINT('',(125.4,-102.3,0.)); +#57983 = CIRCLE('',#57984,0.4); +#57984 = AXIS2_PLACEMENT_3D('',#57985,#57986,#57987); +#57985 = CARTESIAN_POINT('',(125.4,-101.9,0.)); +#57986 = DIRECTION('',(-0.,0.,-1.)); +#57987 = DIRECTION('',(-0.,-1.,0.)); +#57988 = FACE_BOUND('',#57989,.F.); +#57989 = EDGE_LOOP('',(#57990)); +#57990 = ORIENTED_EDGE('',*,*,#57991,.T.); +#57991 = EDGE_CURVE('',#57992,#57992,#57994,.T.); +#57992 = VERTEX_POINT('',#57993); +#57993 = CARTESIAN_POINT('',(127.94,-102.3,0.)); +#57994 = CIRCLE('',#57995,0.4); +#57995 = AXIS2_PLACEMENT_3D('',#57996,#57997,#57998); +#57996 = CARTESIAN_POINT('',(127.94,-101.9,0.)); +#57997 = DIRECTION('',(-0.,0.,-1.)); +#57998 = DIRECTION('',(-0.,-1.,0.)); +#57999 = FACE_BOUND('',#58000,.F.); +#58000 = EDGE_LOOP('',(#58001)); +#58001 = ORIENTED_EDGE('',*,*,#58002,.T.); +#58002 = EDGE_CURVE('',#58003,#58003,#58005,.T.); +#58003 = VERTEX_POINT('',#58004); +#58004 = CARTESIAN_POINT('',(130.48,-102.3,0.)); +#58005 = CIRCLE('',#58006,0.4); +#58006 = AXIS2_PLACEMENT_3D('',#58007,#58008,#58009); +#58007 = CARTESIAN_POINT('',(130.48,-101.9,0.)); +#58008 = DIRECTION('',(-0.,0.,-1.)); +#58009 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#58010 = FACE_BOUND('',#58011,.F.); +#58011 = EDGE_LOOP('',(#58012)); +#58012 = ORIENTED_EDGE('',*,*,#58013,.T.); +#58013 = EDGE_CURVE('',#58014,#58014,#58016,.T.); +#58014 = VERTEX_POINT('',#58015); +#58015 = CARTESIAN_POINT('',(133.02,-102.3,0.)); +#58016 = CIRCLE('',#58017,0.4); +#58017 = AXIS2_PLACEMENT_3D('',#58018,#58019,#58020); +#58018 = CARTESIAN_POINT('',(133.02,-101.9,0.)); +#58019 = DIRECTION('',(-0.,0.,-1.)); +#58020 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#58021 = FACE_BOUND('',#58022,.F.); +#58022 = EDGE_LOOP('',(#58023)); +#58023 = ORIENTED_EDGE('',*,*,#58024,.T.); +#58024 = EDGE_CURVE('',#58025,#58025,#58027,.T.); +#58025 = VERTEX_POINT('',#58026); +#58026 = CARTESIAN_POINT('',(135.56,-102.3,0.)); +#58027 = CIRCLE('',#58028,0.4); +#58028 = AXIS2_PLACEMENT_3D('',#58029,#58030,#58031); +#58029 = CARTESIAN_POINT('',(135.56,-101.9,0.)); +#58030 = DIRECTION('',(-0.,0.,-1.)); +#58031 = DIRECTION('',(-0.,-1.,0.)); +#58032 = FACE_BOUND('',#58033,.F.); +#58033 = EDGE_LOOP('',(#58034)); +#58034 = ORIENTED_EDGE('',*,*,#58035,.T.); +#58035 = EDGE_CURVE('',#58036,#58036,#58038,.T.); +#58036 = VERTEX_POINT('',#58037); +#58037 = CARTESIAN_POINT('',(138.1,-102.3,0.)); +#58038 = CIRCLE('',#58039,0.4); +#58039 = AXIS2_PLACEMENT_3D('',#58040,#58041,#58042); +#58040 = CARTESIAN_POINT('',(138.1,-101.9,0.)); +#58041 = DIRECTION('',(-0.,0.,-1.)); +#58042 = DIRECTION('',(-0.,-1.,0.)); +#58043 = FACE_BOUND('',#58044,.F.); +#58044 = EDGE_LOOP('',(#58045)); +#58045 = ORIENTED_EDGE('',*,*,#58046,.T.); +#58046 = EDGE_CURVE('',#58047,#58047,#58049,.T.); +#58047 = VERTEX_POINT('',#58048); +#58048 = CARTESIAN_POINT('',(176.5,-130.075,0.)); +#58049 = CIRCLE('',#58050,0.475); +#58050 = AXIS2_PLACEMENT_3D('',#58051,#58052,#58053); +#58051 = CARTESIAN_POINT('',(176.5,-129.6,0.)); +#58052 = DIRECTION('',(-0.,0.,-1.)); +#58053 = DIRECTION('',(-0.,-1.,0.)); +#58054 = FACE_BOUND('',#58055,.F.); +#58055 = EDGE_LOOP('',(#58056)); +#58056 = ORIENTED_EDGE('',*,*,#58057,.T.); +#58057 = EDGE_CURVE('',#58058,#58058,#58060,.T.); +#58058 = VERTEX_POINT('',#58059); +#58059 = CARTESIAN_POINT('',(176.5,-123.975,0.)); +#58060 = CIRCLE('',#58061,0.475); +#58061 = AXIS2_PLACEMENT_3D('',#58062,#58063,#58064); +#58062 = CARTESIAN_POINT('',(176.5,-123.5,0.)); +#58063 = DIRECTION('',(-0.,0.,-1.)); +#58064 = DIRECTION('',(-0.,-1.,0.)); +#58065 = FACE_BOUND('',#58066,.F.); +#58066 = EDGE_LOOP('',(#58067)); +#58067 = ORIENTED_EDGE('',*,*,#58068,.T.); +#58068 = EDGE_CURVE('',#58069,#58069,#58071,.T.); +#58069 = VERTEX_POINT('',#58070); +#58070 = CARTESIAN_POINT('',(166.04,-124.38,0.)); +#58071 = CIRCLE('',#58072,1.6); +#58072 = AXIS2_PLACEMENT_3D('',#58073,#58074,#58075); +#58073 = CARTESIAN_POINT('',(166.04,-122.78,0.)); +#58074 = DIRECTION('',(-0.,0.,-1.)); +#58075 = DIRECTION('',(-0.,-1.,0.)); +#58076 = FACE_BOUND('',#58077,.F.); +#58077 = EDGE_LOOP('',(#58078)); +#58078 = ORIENTED_EDGE('',*,*,#58079,.T.); +#58079 = EDGE_CURVE('',#58080,#58080,#58082,.T.); +#58080 = VERTEX_POINT('',#58081); +#58081 = CARTESIAN_POINT('',(176.5,-121.475,0.)); +#58082 = CIRCLE('',#58083,0.475); +#58083 = AXIS2_PLACEMENT_3D('',#58084,#58085,#58086); +#58084 = CARTESIAN_POINT('',(176.5,-121.,0.)); +#58085 = DIRECTION('',(-0.,0.,-1.)); +#58086 = DIRECTION('',(-0.,-1.,0.)); +#58087 = FACE_BOUND('',#58088,.F.); +#58088 = EDGE_LOOP('',(#58089)); +#58089 = ORIENTED_EDGE('',*,*,#58090,.T.); +#58090 = EDGE_CURVE('',#58091,#58091,#58093,.T.); +#58091 = VERTEX_POINT('',#58092); +#58092 = CARTESIAN_POINT('',(176.5,-118.975,0.)); +#58093 = CIRCLE('',#58094,0.475); +#58094 = AXIS2_PLACEMENT_3D('',#58095,#58096,#58097); +#58095 = CARTESIAN_POINT('',(176.5,-118.5,0.)); +#58096 = DIRECTION('',(-0.,0.,-1.)); +#58097 = DIRECTION('',(-0.,-1.,0.)); +#58098 = FACE_BOUND('',#58099,.F.); +#58099 = EDGE_LOOP('',(#58100)); +#58100 = ORIENTED_EDGE('',*,*,#58101,.T.); +#58101 = EDGE_CURVE('',#58102,#58102,#58104,.T.); +#58102 = VERTEX_POINT('',#58103); +#58103 = CARTESIAN_POINT('',(141.32,-115.,0.)); +#58104 = CIRCLE('',#58105,0.4); +#58105 = AXIS2_PLACEMENT_3D('',#58106,#58107,#58108); +#58106 = CARTESIAN_POINT('',(141.32,-114.6,0.)); +#58107 = DIRECTION('',(-0.,0.,-1.)); +#58108 = DIRECTION('',(-0.,-1.,0.)); +#58109 = FACE_BOUND('',#58110,.F.); +#58110 = EDGE_LOOP('',(#58111)); +#58111 = ORIENTED_EDGE('',*,*,#58112,.T.); +#58112 = EDGE_CURVE('',#58113,#58113,#58115,.T.); +#58113 = VERTEX_POINT('',#58114); +#58114 = CARTESIAN_POINT('',(143.86,-115.,0.)); +#58115 = CIRCLE('',#58116,0.4); +#58116 = AXIS2_PLACEMENT_3D('',#58117,#58118,#58119); +#58117 = CARTESIAN_POINT('',(143.86,-114.6,0.)); +#58118 = DIRECTION('',(-0.,0.,-1.)); +#58119 = DIRECTION('',(-0.,-1.,0.)); +#58120 = FACE_BOUND('',#58121,.F.); +#58121 = EDGE_LOOP('',(#58122)); +#58122 = ORIENTED_EDGE('',*,*,#58123,.T.); +#58123 = EDGE_CURVE('',#58124,#58124,#58126,.T.); +#58124 = VERTEX_POINT('',#58125); +#58125 = CARTESIAN_POINT('',(146.4,-115.,0.)); +#58126 = CIRCLE('',#58127,0.4); +#58127 = AXIS2_PLACEMENT_3D('',#58128,#58129,#58130); +#58128 = CARTESIAN_POINT('',(146.4,-114.6,0.)); +#58129 = DIRECTION('',(-0.,0.,-1.)); +#58130 = DIRECTION('',(-0.,-1.,0.)); +#58131 = FACE_BOUND('',#58132,.F.); +#58132 = EDGE_LOOP('',(#58133)); +#58133 = ORIENTED_EDGE('',*,*,#58134,.T.); +#58134 = EDGE_CURVE('',#58135,#58135,#58137,.T.); +#58135 = VERTEX_POINT('',#58136); +#58136 = CARTESIAN_POINT('',(148.94,-115.,0.)); +#58137 = CIRCLE('',#58138,0.4); +#58138 = AXIS2_PLACEMENT_3D('',#58139,#58140,#58141); +#58139 = CARTESIAN_POINT('',(148.94,-114.6,0.)); +#58140 = DIRECTION('',(-0.,0.,-1.)); +#58141 = DIRECTION('',(-0.,-1.,0.)); +#58142 = FACE_BOUND('',#58143,.F.); +#58143 = EDGE_LOOP('',(#58144)); +#58144 = ORIENTED_EDGE('',*,*,#58145,.T.); +#58145 = EDGE_CURVE('',#58146,#58146,#58148,.T.); +#58146 = VERTEX_POINT('',#58147); +#58147 = CARTESIAN_POINT('',(151.48,-115.,0.)); +#58148 = CIRCLE('',#58149,0.4); +#58149 = AXIS2_PLACEMENT_3D('',#58150,#58151,#58152); +#58150 = CARTESIAN_POINT('',(151.48,-114.6,0.)); +#58151 = DIRECTION('',(-0.,0.,-1.)); +#58152 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#58153 = FACE_BOUND('',#58154,.F.); +#58154 = EDGE_LOOP('',(#58155)); +#58155 = ORIENTED_EDGE('',*,*,#58156,.T.); +#58156 = EDGE_CURVE('',#58157,#58157,#58159,.T.); +#58157 = VERTEX_POINT('',#58158); +#58158 = CARTESIAN_POINT('',(154.02,-115.,0.)); +#58159 = CIRCLE('',#58160,0.4); +#58160 = AXIS2_PLACEMENT_3D('',#58161,#58162,#58163); +#58161 = CARTESIAN_POINT('',(154.02,-114.6,0.)); +#58162 = DIRECTION('',(-0.,0.,-1.)); +#58163 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#58164 = FACE_BOUND('',#58165,.F.); +#58165 = EDGE_LOOP('',(#58166)); +#58166 = ORIENTED_EDGE('',*,*,#58167,.T.); +#58167 = EDGE_CURVE('',#58168,#58168,#58170,.T.); +#58168 = VERTEX_POINT('',#58169); +#58169 = CARTESIAN_POINT('',(156.56,-115.,0.)); +#58170 = CIRCLE('',#58171,0.4); +#58171 = AXIS2_PLACEMENT_3D('',#58172,#58173,#58174); +#58172 = CARTESIAN_POINT('',(156.56,-114.6,0.)); +#58173 = DIRECTION('',(-0.,0.,-1.)); +#58174 = DIRECTION('',(-0.,-1.,0.)); +#58175 = FACE_BOUND('',#58176,.F.); +#58176 = EDGE_LOOP('',(#58177)); +#58177 = ORIENTED_EDGE('',*,*,#58178,.T.); +#58178 = EDGE_CURVE('',#58179,#58179,#58181,.T.); +#58179 = VERTEX_POINT('',#58180); +#58180 = CARTESIAN_POINT('',(141.32,-102.3,0.)); +#58181 = CIRCLE('',#58182,0.4); +#58182 = AXIS2_PLACEMENT_3D('',#58183,#58184,#58185); +#58183 = CARTESIAN_POINT('',(141.32,-101.9,0.)); +#58184 = DIRECTION('',(-0.,0.,-1.)); +#58185 = DIRECTION('',(-0.,-1.,0.)); +#58186 = FACE_BOUND('',#58187,.F.); +#58187 = EDGE_LOOP('',(#58188)); +#58188 = ORIENTED_EDGE('',*,*,#58189,.T.); +#58189 = EDGE_CURVE('',#58190,#58190,#58192,.T.); +#58190 = VERTEX_POINT('',#58191); +#58191 = CARTESIAN_POINT('',(143.86,-102.3,0.)); +#58192 = CIRCLE('',#58193,0.4); +#58193 = AXIS2_PLACEMENT_3D('',#58194,#58195,#58196); +#58194 = CARTESIAN_POINT('',(143.86,-101.9,0.)); +#58195 = DIRECTION('',(-0.,0.,-1.)); +#58196 = DIRECTION('',(-0.,-1.,0.)); +#58197 = FACE_BOUND('',#58198,.F.); +#58198 = EDGE_LOOP('',(#58199)); +#58199 = ORIENTED_EDGE('',*,*,#58200,.T.); +#58200 = EDGE_CURVE('',#58201,#58201,#58203,.T.); +#58201 = VERTEX_POINT('',#58202); +#58202 = CARTESIAN_POINT('',(146.4,-102.3,0.)); +#58203 = CIRCLE('',#58204,0.4); +#58204 = AXIS2_PLACEMENT_3D('',#58205,#58206,#58207); +#58205 = CARTESIAN_POINT('',(146.4,-101.9,0.)); +#58206 = DIRECTION('',(-0.,0.,-1.)); +#58207 = DIRECTION('',(-0.,-1.,0.)); +#58208 = FACE_BOUND('',#58209,.F.); +#58209 = EDGE_LOOP('',(#58210)); +#58210 = ORIENTED_EDGE('',*,*,#58211,.T.); +#58211 = EDGE_CURVE('',#58212,#58212,#58214,.T.); +#58212 = VERTEX_POINT('',#58213); +#58213 = CARTESIAN_POINT('',(148.94,-102.3,0.)); +#58214 = CIRCLE('',#58215,0.4); +#58215 = AXIS2_PLACEMENT_3D('',#58216,#58217,#58218); +#58216 = CARTESIAN_POINT('',(148.94,-101.9,0.)); +#58217 = DIRECTION('',(-0.,0.,-1.)); +#58218 = DIRECTION('',(-0.,-1.,0.)); +#58219 = FACE_BOUND('',#58220,.F.); +#58220 = EDGE_LOOP('',(#58221)); +#58221 = ORIENTED_EDGE('',*,*,#58222,.T.); +#58222 = EDGE_CURVE('',#58223,#58223,#58225,.T.); +#58223 = VERTEX_POINT('',#58224); +#58224 = CARTESIAN_POINT('',(151.48,-102.3,0.)); +#58225 = CIRCLE('',#58226,0.4); +#58226 = AXIS2_PLACEMENT_3D('',#58227,#58228,#58229); +#58227 = CARTESIAN_POINT('',(151.48,-101.9,0.)); +#58228 = DIRECTION('',(-0.,0.,-1.)); +#58229 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#58230 = FACE_BOUND('',#58231,.F.); +#58231 = EDGE_LOOP('',(#58232)); +#58232 = ORIENTED_EDGE('',*,*,#58233,.T.); +#58233 = EDGE_CURVE('',#58234,#58234,#58236,.T.); +#58234 = VERTEX_POINT('',#58235); +#58235 = CARTESIAN_POINT('',(154.02,-102.3,0.)); +#58236 = CIRCLE('',#58237,0.4); +#58237 = AXIS2_PLACEMENT_3D('',#58238,#58239,#58240); +#58238 = CARTESIAN_POINT('',(154.02,-101.9,0.)); +#58239 = DIRECTION('',(-0.,0.,-1.)); +#58240 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#58241 = FACE_BOUND('',#58242,.F.); +#58242 = EDGE_LOOP('',(#58243)); +#58243 = ORIENTED_EDGE('',*,*,#58244,.T.); +#58244 = EDGE_CURVE('',#58245,#58245,#58247,.T.); +#58245 = VERTEX_POINT('',#58246); +#58246 = CARTESIAN_POINT('',(156.56,-102.3,0.)); +#58247 = CIRCLE('',#58248,0.4); +#58248 = AXIS2_PLACEMENT_3D('',#58249,#58250,#58251); +#58249 = CARTESIAN_POINT('',(156.56,-101.9,0.)); +#58250 = DIRECTION('',(-0.,0.,-1.)); +#58251 = DIRECTION('',(-0.,-1.,0.)); +#58252 = FACE_BOUND('',#58253,.F.); +#58253 = EDGE_LOOP('',(#58254)); +#58254 = ORIENTED_EDGE('',*,*,#58255,.T.); +#58255 = EDGE_CURVE('',#58256,#58256,#58258,.T.); +#58256 = VERTEX_POINT('',#58257); +#58257 = CARTESIAN_POINT('',(159.1,-115.,0.)); +#58258 = CIRCLE('',#58259,0.4); +#58259 = AXIS2_PLACEMENT_3D('',#58260,#58261,#58262); +#58260 = CARTESIAN_POINT('',(159.1,-114.6,0.)); +#58261 = DIRECTION('',(-0.,0.,-1.)); +#58262 = DIRECTION('',(-0.,-1.,0.)); +#58263 = FACE_BOUND('',#58264,.F.); +#58264 = EDGE_LOOP('',(#58265)); +#58265 = ORIENTED_EDGE('',*,*,#58266,.T.); +#58266 = EDGE_CURVE('',#58267,#58267,#58269,.T.); +#58267 = VERTEX_POINT('',#58268); +#58268 = CARTESIAN_POINT('',(176.5,-111.375,0.)); +#58269 = CIRCLE('',#58270,0.475); +#58270 = AXIS2_PLACEMENT_3D('',#58271,#58272,#58273); +#58271 = CARTESIAN_POINT('',(176.5,-110.9,0.)); +#58272 = DIRECTION('',(-0.,0.,-1.)); +#58273 = DIRECTION('',(-0.,-1.,0.)); +#58274 = FACE_BOUND('',#58275,.F.); +#58275 = EDGE_LOOP('',(#58276)); +#58276 = ORIENTED_EDGE('',*,*,#58277,.T.); +#58277 = EDGE_CURVE('',#58278,#58278,#58280,.T.); +#58278 = VERTEX_POINT('',#58279); +#58279 = CARTESIAN_POINT('',(159.1,-102.3,0.)); +#58280 = CIRCLE('',#58281,0.4); +#58281 = AXIS2_PLACEMENT_3D('',#58282,#58283,#58284); +#58282 = CARTESIAN_POINT('',(159.1,-101.9,0.)); +#58283 = DIRECTION('',(-0.,0.,-1.)); +#58284 = DIRECTION('',(-0.,-1.,0.)); +#58285 = FACE_BOUND('',#58286,.F.); +#58286 = EDGE_LOOP('',(#58287)); +#58287 = ORIENTED_EDGE('',*,*,#58288,.T.); +#58288 = EDGE_CURVE('',#58289,#58289,#58291,.T.); +#58289 = VERTEX_POINT('',#58290); +#58290 = CARTESIAN_POINT('',(176.5,-108.875,0.)); +#58291 = CIRCLE('',#58292,0.475); +#58292 = AXIS2_PLACEMENT_3D('',#58293,#58294,#58295); +#58293 = CARTESIAN_POINT('',(176.5,-108.4,0.)); +#58294 = DIRECTION('',(-0.,0.,-1.)); +#58295 = DIRECTION('',(-0.,-1.,0.)); +#58296 = FACE_BOUND('',#58297,.F.); +#58297 = EDGE_LOOP('',(#58298)); +#58298 = ORIENTED_EDGE('',*,*,#58299,.T.); +#58299 = EDGE_CURVE('',#58300,#58300,#58302,.T.); +#58300 = VERTEX_POINT('',#58301); +#58301 = CARTESIAN_POINT('',(176.5,-106.375,0.)); +#58302 = CIRCLE('',#58303,0.475); +#58303 = AXIS2_PLACEMENT_3D('',#58304,#58305,#58306); +#58304 = CARTESIAN_POINT('',(176.5,-105.9,0.)); +#58305 = DIRECTION('',(-0.,0.,-1.)); +#58306 = DIRECTION('',(-0.,-1.,0.)); +#58307 = FACE_BOUND('',#58308,.F.); +#58308 = EDGE_LOOP('',(#58309)); +#58309 = ORIENTED_EDGE('',*,*,#58310,.T.); +#58310 = EDGE_CURVE('',#58311,#58311,#58313,.T.); +#58311 = VERTEX_POINT('',#58312); +#58312 = CARTESIAN_POINT('',(176.5,-103.875,0.)); +#58313 = CIRCLE('',#58314,0.475); +#58314 = AXIS2_PLACEMENT_3D('',#58315,#58316,#58317); +#58315 = CARTESIAN_POINT('',(176.5,-103.4,0.)); +#58316 = DIRECTION('',(-0.,0.,-1.)); +#58317 = DIRECTION('',(-0.,-1.,0.)); +#58318 = PLANE('',#58319); +#58319 = AXIS2_PLACEMENT_3D('',#58320,#58321,#58322); +#58320 = CARTESIAN_POINT('',(0.,0.,0.)); +#58321 = DIRECTION('',(0.,0.,1.)); +#58322 = DIRECTION('',(1.,0.,-0.)); +#58323 = ADVANCED_FACE('',(#58324,#58335,#58346,#58382,#58393,#58429, + #58440,#58476,#58512,#58523,#58534,#58545,#58556,#58567,#58578, + #58589,#58600,#58611,#58622,#58633,#58644,#58655,#58691,#58702, + #58738,#58774,#58810,#58821,#58832,#58843,#58854,#58865,#58876, + #58887,#58898,#58909,#58920,#58931,#58942,#58953,#58964,#58975, + #58986,#58997,#59008,#59019,#59030,#59041,#59052,#59063,#59074, + #59085,#59096,#59107,#59118,#59129,#59140,#59151,#59162,#59173, + #59184,#59195,#59206,#59217,#59228,#59239,#59250,#59261,#59272, + #59283,#59294,#59305),#59316,.T.); +#58324 = FACE_BOUND('',#58325,.T.); +#58325 = EDGE_LOOP('',(#58326,#58327,#58328,#58334)); +#58326 = ORIENTED_EDGE('',*,*,#57237,.F.); +#58327 = ORIENTED_EDGE('',*,*,#57277,.F.); +#58328 = ORIENTED_EDGE('',*,*,#58329,.F.); +#58329 = EDGE_CURVE('',#57300,#57270,#58330,.T.); +#58330 = LINE('',#58331,#58332); +#58331 = CARTESIAN_POINT('',(100.,-100.,1.51)); +#58332 = VECTOR('',#58333,1.); +#58333 = DIRECTION('',(1.,0.,0.)); +#58334 = ORIENTED_EDGE('',*,*,#57299,.F.); +#58335 = FACE_BOUND('',#58336,.T.); +#58336 = EDGE_LOOP('',(#58337)); +#58337 = ORIENTED_EDGE('',*,*,#58338,.T.); +#58338 = EDGE_CURVE('',#58339,#58339,#58341,.T.); +#58339 = VERTEX_POINT('',#58340); +#58340 = CARTESIAN_POINT('',(113.97,-157.4,1.51)); +#58341 = CIRCLE('',#58342,1.6); +#58342 = AXIS2_PLACEMENT_3D('',#58343,#58344,#58345); +#58343 = CARTESIAN_POINT('',(113.97,-155.8,1.51)); +#58344 = DIRECTION('',(-0.,0.,-1.)); +#58345 = DIRECTION('',(-0.,-1.,0.)); +#58346 = FACE_BOUND('',#58347,.T.); +#58347 = EDGE_LOOP('',(#58348,#58359,#58367,#58376)); +#58348 = ORIENTED_EDGE('',*,*,#58349,.T.); +#58349 = EDGE_CURVE('',#58350,#58352,#58354,.T.); +#58350 = VERTEX_POINT('',#58351); +#58351 = CARTESIAN_POINT('',(102.05,-148.62,1.51)); +#58352 = VERTEX_POINT('',#58353); +#58353 = CARTESIAN_POINT('',(102.05,-148.02,1.51)); +#58354 = CIRCLE('',#58355,0.3); +#58355 = AXIS2_PLACEMENT_3D('',#58356,#58357,#58358); +#58356 = CARTESIAN_POINT('',(102.05,-148.32,1.51)); +#58357 = DIRECTION('',(-0.,0.,-1.)); +#58358 = DIRECTION('',(0.,1.,0.)); +#58359 = ORIENTED_EDGE('',*,*,#58360,.T.); +#58360 = EDGE_CURVE('',#58352,#58361,#58363,.T.); +#58361 = VERTEX_POINT('',#58362); +#58362 = CARTESIAN_POINT('',(102.65,-148.02,1.51)); +#58363 = LINE('',#58364,#58365); +#58364 = CARTESIAN_POINT('',(51.325,-148.02,1.51)); +#58365 = VECTOR('',#58366,1.); +#58366 = DIRECTION('',(1.,0.,-0.)); +#58367 = ORIENTED_EDGE('',*,*,#58368,.T.); +#58368 = EDGE_CURVE('',#58361,#58369,#58371,.T.); +#58369 = VERTEX_POINT('',#58370); +#58370 = CARTESIAN_POINT('',(102.65,-148.62,1.51)); +#58371 = CIRCLE('',#58372,0.3); +#58372 = AXIS2_PLACEMENT_3D('',#58373,#58374,#58375); +#58373 = CARTESIAN_POINT('',(102.65,-148.32,1.51)); +#58374 = DIRECTION('',(-0.,0.,-1.)); +#58375 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#58376 = ORIENTED_EDGE('',*,*,#58377,.T.); +#58377 = EDGE_CURVE('',#58369,#58350,#58378,.T.); +#58378 = LINE('',#58379,#58380); +#58379 = CARTESIAN_POINT('',(51.025,-148.62,1.51)); +#58380 = VECTOR('',#58381,1.); +#58381 = DIRECTION('',(-1.,0.,0.)); +#58382 = FACE_BOUND('',#58383,.T.); +#58383 = EDGE_LOOP('',(#58384)); +#58384 = ORIENTED_EDGE('',*,*,#58385,.T.); +#58385 = EDGE_CURVE('',#58386,#58386,#58388,.T.); +#58386 = VERTEX_POINT('',#58387); +#58387 = CARTESIAN_POINT('',(106.,-147.215,1.51)); +#58388 = CIRCLE('',#58389,0.325); +#58389 = AXIS2_PLACEMENT_3D('',#58390,#58391,#58392); +#58390 = CARTESIAN_POINT('',(106.,-146.89,1.51)); +#58391 = DIRECTION('',(-0.,0.,-1.)); +#58392 = DIRECTION('',(-0.,-1.,0.)); +#58393 = FACE_BOUND('',#58394,.T.); +#58394 = EDGE_LOOP('',(#58395,#58406,#58414,#58423)); +#58395 = ORIENTED_EDGE('',*,*,#58396,.T.); +#58396 = EDGE_CURVE('',#58397,#58399,#58401,.T.); +#58397 = VERTEX_POINT('',#58398); +#58398 = CARTESIAN_POINT('',(105.98,-148.62,1.51)); +#58399 = VERTEX_POINT('',#58400); +#58400 = CARTESIAN_POINT('',(105.98,-148.02,1.51)); +#58401 = CIRCLE('',#58402,0.3); +#58402 = AXIS2_PLACEMENT_3D('',#58403,#58404,#58405); +#58403 = CARTESIAN_POINT('',(105.98,-148.32,1.51)); +#58404 = DIRECTION('',(-0.,0.,-1.)); +#58405 = DIRECTION('',(0.,1.,0.)); +#58406 = ORIENTED_EDGE('',*,*,#58407,.T.); +#58407 = EDGE_CURVE('',#58399,#58408,#58410,.T.); +#58408 = VERTEX_POINT('',#58409); +#58409 = CARTESIAN_POINT('',(107.08,-148.02,1.51)); +#58410 = LINE('',#58411,#58412); +#58411 = CARTESIAN_POINT('',(53.54,-148.02,1.51)); +#58412 = VECTOR('',#58413,1.); +#58413 = DIRECTION('',(1.,0.,-0.)); +#58414 = ORIENTED_EDGE('',*,*,#58415,.T.); +#58415 = EDGE_CURVE('',#58408,#58416,#58418,.T.); +#58416 = VERTEX_POINT('',#58417); +#58417 = CARTESIAN_POINT('',(107.08,-148.62,1.51)); +#58418 = CIRCLE('',#58419,0.3); +#58419 = AXIS2_PLACEMENT_3D('',#58420,#58421,#58422); +#58420 = CARTESIAN_POINT('',(107.08,-148.32,1.51)); +#58421 = DIRECTION('',(-0.,0.,-1.)); +#58422 = DIRECTION('',(-0.,-1.,0.)); +#58423 = ORIENTED_EDGE('',*,*,#58424,.T.); +#58424 = EDGE_CURVE('',#58416,#58397,#58425,.T.); +#58425 = LINE('',#58426,#58427); +#58426 = CARTESIAN_POINT('',(52.99,-148.62,1.51)); +#58427 = VECTOR('',#58428,1.); +#58428 = DIRECTION('',(-1.,0.,0.)); +#58429 = FACE_BOUND('',#58430,.T.); +#58430 = EDGE_LOOP('',(#58431)); +#58431 = ORIENTED_EDGE('',*,*,#58432,.T.); +#58432 = EDGE_CURVE('',#58433,#58433,#58435,.T.); +#58433 = VERTEX_POINT('',#58434); +#58434 = CARTESIAN_POINT('',(106.,-141.435,1.51)); +#58435 = CIRCLE('',#58436,0.325); +#58436 = AXIS2_PLACEMENT_3D('',#58437,#58438,#58439); +#58437 = CARTESIAN_POINT('',(106.,-141.11,1.51)); +#58438 = DIRECTION('',(-0.,0.,-1.)); +#58439 = DIRECTION('',(-0.,-1.,0.)); +#58440 = FACE_BOUND('',#58441,.T.); +#58441 = EDGE_LOOP('',(#58442,#58453,#58461,#58470)); +#58442 = ORIENTED_EDGE('',*,*,#58443,.T.); +#58443 = EDGE_CURVE('',#58444,#58446,#58448,.T.); +#58444 = VERTEX_POINT('',#58445); +#58445 = CARTESIAN_POINT('',(102.05,-139.98,1.51)); +#58446 = VERTEX_POINT('',#58447); +#58447 = CARTESIAN_POINT('',(102.05,-139.38,1.51)); +#58448 = CIRCLE('',#58449,0.3); +#58449 = AXIS2_PLACEMENT_3D('',#58450,#58451,#58452); +#58450 = CARTESIAN_POINT('',(102.05,-139.68,1.51)); +#58451 = DIRECTION('',(-0.,0.,-1.)); +#58452 = DIRECTION('',(0.,1.,0.)); +#58453 = ORIENTED_EDGE('',*,*,#58454,.T.); +#58454 = EDGE_CURVE('',#58446,#58455,#58457,.T.); +#58455 = VERTEX_POINT('',#58456); +#58456 = CARTESIAN_POINT('',(102.65,-139.38,1.51)); +#58457 = LINE('',#58458,#58459); +#58458 = CARTESIAN_POINT('',(51.325,-139.38,1.51)); +#58459 = VECTOR('',#58460,1.); +#58460 = DIRECTION('',(1.,0.,-0.)); +#58461 = ORIENTED_EDGE('',*,*,#58462,.T.); +#58462 = EDGE_CURVE('',#58455,#58463,#58465,.T.); +#58463 = VERTEX_POINT('',#58464); +#58464 = CARTESIAN_POINT('',(102.65,-139.98,1.51)); +#58465 = CIRCLE('',#58466,0.3); +#58466 = AXIS2_PLACEMENT_3D('',#58467,#58468,#58469); +#58467 = CARTESIAN_POINT('',(102.65,-139.68,1.51)); +#58468 = DIRECTION('',(-0.,0.,-1.)); +#58469 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#58470 = ORIENTED_EDGE('',*,*,#58471,.T.); +#58471 = EDGE_CURVE('',#58463,#58444,#58472,.T.); +#58472 = LINE('',#58473,#58474); +#58473 = CARTESIAN_POINT('',(51.025,-139.98,1.51)); +#58474 = VECTOR('',#58475,1.); +#58475 = DIRECTION('',(-1.,0.,0.)); +#58476 = FACE_BOUND('',#58477,.T.); +#58477 = EDGE_LOOP('',(#58478,#58489,#58497,#58506)); +#58478 = ORIENTED_EDGE('',*,*,#58479,.T.); +#58479 = EDGE_CURVE('',#58480,#58482,#58484,.T.); +#58480 = VERTEX_POINT('',#58481); +#58481 = CARTESIAN_POINT('',(105.98,-139.98,1.51)); +#58482 = VERTEX_POINT('',#58483); +#58483 = CARTESIAN_POINT('',(105.98,-139.38,1.51)); +#58484 = CIRCLE('',#58485,0.3); +#58485 = AXIS2_PLACEMENT_3D('',#58486,#58487,#58488); +#58486 = CARTESIAN_POINT('',(105.98,-139.68,1.51)); +#58487 = DIRECTION('',(-0.,0.,-1.)); +#58488 = DIRECTION('',(0.,1.,0.)); +#58489 = ORIENTED_EDGE('',*,*,#58490,.T.); +#58490 = EDGE_CURVE('',#58482,#58491,#58493,.T.); +#58491 = VERTEX_POINT('',#58492); +#58492 = CARTESIAN_POINT('',(107.08,-139.38,1.51)); +#58493 = LINE('',#58494,#58495); +#58494 = CARTESIAN_POINT('',(53.54,-139.38,1.51)); +#58495 = VECTOR('',#58496,1.); +#58496 = DIRECTION('',(1.,0.,-0.)); +#58497 = ORIENTED_EDGE('',*,*,#58498,.T.); +#58498 = EDGE_CURVE('',#58491,#58499,#58501,.T.); +#58499 = VERTEX_POINT('',#58500); +#58500 = CARTESIAN_POINT('',(107.08,-139.98,1.51)); +#58501 = CIRCLE('',#58502,0.3); +#58502 = AXIS2_PLACEMENT_3D('',#58503,#58504,#58505); +#58503 = CARTESIAN_POINT('',(107.08,-139.68,1.51)); +#58504 = DIRECTION('',(-0.,0.,-1.)); +#58505 = DIRECTION('',(-0.,-1.,0.)); +#58506 = ORIENTED_EDGE('',*,*,#58507,.T.); +#58507 = EDGE_CURVE('',#58499,#58480,#58508,.T.); +#58508 = LINE('',#58509,#58510); +#58509 = CARTESIAN_POINT('',(52.99,-139.98,1.51)); +#58510 = VECTOR('',#58511,1.); +#58511 = DIRECTION('',(-1.,0.,0.)); +#58512 = FACE_BOUND('',#58513,.T.); +#58513 = EDGE_LOOP('',(#58514)); +#58514 = ORIENTED_EDGE('',*,*,#58515,.T.); +#58515 = EDGE_CURVE('',#58516,#58516,#58518,.T.); +#58516 = VERTEX_POINT('',#58517); +#58517 = CARTESIAN_POINT('',(118.,-135.5,1.51)); +#58518 = CIRCLE('',#58519,0.5); +#58519 = AXIS2_PLACEMENT_3D('',#58520,#58521,#58522); +#58520 = CARTESIAN_POINT('',(118.,-135.,1.51)); +#58521 = DIRECTION('',(-0.,0.,-1.)); +#58522 = DIRECTION('',(-0.,-1.,0.)); +#58523 = FACE_BOUND('',#58524,.T.); +#58524 = EDGE_LOOP('',(#58525)); +#58525 = ORIENTED_EDGE('',*,*,#58526,.T.); +#58526 = EDGE_CURVE('',#58527,#58527,#58529,.T.); +#58527 = VERTEX_POINT('',#58528); +#58528 = CARTESIAN_POINT('',(120.54,-135.5,1.51)); +#58529 = CIRCLE('',#58530,0.5); +#58530 = AXIS2_PLACEMENT_3D('',#58531,#58532,#58533); +#58531 = CARTESIAN_POINT('',(120.54,-135.,1.51)); +#58532 = DIRECTION('',(-0.,0.,-1.)); +#58533 = DIRECTION('',(-0.,-1.,0.)); +#58534 = FACE_BOUND('',#58535,.T.); +#58535 = EDGE_LOOP('',(#58536)); +#58536 = ORIENTED_EDGE('',*,*,#58537,.T.); +#58537 = EDGE_CURVE('',#58538,#58538,#58540,.T.); +#58538 = VERTEX_POINT('',#58539); +#58539 = CARTESIAN_POINT('',(123.08,-135.5,1.51)); +#58540 = CIRCLE('',#58541,0.5); +#58541 = AXIS2_PLACEMENT_3D('',#58542,#58543,#58544); +#58542 = CARTESIAN_POINT('',(123.08,-135.,1.51)); +#58543 = DIRECTION('',(-0.,0.,-1.)); +#58544 = DIRECTION('',(-0.,-1.,0.)); +#58545 = FACE_BOUND('',#58546,.T.); +#58546 = EDGE_LOOP('',(#58547)); +#58547 = ORIENTED_EDGE('',*,*,#58548,.T.); +#58548 = EDGE_CURVE('',#58549,#58549,#58551,.T.); +#58549 = VERTEX_POINT('',#58550); +#58550 = CARTESIAN_POINT('',(177.5,-160.12,1.51)); +#58551 = CIRCLE('',#58552,0.5); +#58552 = AXIS2_PLACEMENT_3D('',#58553,#58554,#58555); +#58553 = CARTESIAN_POINT('',(177.5,-159.62,1.51)); +#58554 = DIRECTION('',(-0.,0.,-1.)); +#58555 = DIRECTION('',(-0.,-1.,0.)); +#58556 = FACE_BOUND('',#58557,.T.); +#58557 = EDGE_LOOP('',(#58558)); +#58558 = ORIENTED_EDGE('',*,*,#58559,.T.); +#58559 = EDGE_CURVE('',#58560,#58560,#58562,.T.); +#58560 = VERTEX_POINT('',#58561); +#58561 = CARTESIAN_POINT('',(177.5,-157.58,1.51)); +#58562 = CIRCLE('',#58563,0.5); +#58563 = AXIS2_PLACEMENT_3D('',#58564,#58565,#58566); +#58564 = CARTESIAN_POINT('',(177.5,-157.08,1.51)); +#58565 = DIRECTION('',(-0.,0.,-1.)); +#58566 = DIRECTION('',(-0.,-1.,0.)); +#58567 = FACE_BOUND('',#58568,.T.); +#58568 = EDGE_LOOP('',(#58569)); +#58569 = ORIENTED_EDGE('',*,*,#58570,.T.); +#58570 = EDGE_CURVE('',#58571,#58571,#58573,.T.); +#58571 = VERTEX_POINT('',#58572); +#58572 = CARTESIAN_POINT('',(177.5,-155.04,1.51)); +#58573 = CIRCLE('',#58574,0.5); +#58574 = AXIS2_PLACEMENT_3D('',#58575,#58576,#58577); +#58575 = CARTESIAN_POINT('',(177.5,-154.54,1.51)); +#58576 = DIRECTION('',(-0.,0.,-1.)); +#58577 = DIRECTION('',(-0.,-1.,0.)); +#58578 = FACE_BOUND('',#58579,.T.); +#58579 = EDGE_LOOP('',(#58580)); +#58580 = ORIENTED_EDGE('',*,*,#58581,.T.); +#58581 = EDGE_CURVE('',#58582,#58582,#58584,.T.); +#58582 = VERTEX_POINT('',#58583); +#58583 = CARTESIAN_POINT('',(166.04,-152.32,1.51)); +#58584 = CIRCLE('',#58585,1.6); +#58585 = AXIS2_PLACEMENT_3D('',#58586,#58587,#58588); +#58586 = CARTESIAN_POINT('',(166.04,-150.72,1.51)); +#58587 = DIRECTION('',(-0.,0.,-1.)); +#58588 = DIRECTION('',(-0.,-1.,0.)); +#58589 = FACE_BOUND('',#58590,.T.); +#58590 = EDGE_LOOP('',(#58591)); +#58591 = ORIENTED_EDGE('',*,*,#58592,.T.); +#58592 = EDGE_CURVE('',#58593,#58593,#58595,.T.); +#58593 = VERTEX_POINT('',#58594); +#58594 = CARTESIAN_POINT('',(177.5,-152.5,1.51)); +#58595 = CIRCLE('',#58596,0.5); +#58596 = AXIS2_PLACEMENT_3D('',#58597,#58598,#58599); +#58597 = CARTESIAN_POINT('',(177.5,-152.,1.51)); +#58598 = DIRECTION('',(-0.,0.,-1.)); +#58599 = DIRECTION('',(-0.,-1.,0.)); +#58600 = FACE_BOUND('',#58601,.T.); +#58601 = EDGE_LOOP('',(#58602)); +#58602 = ORIENTED_EDGE('',*,*,#58603,.T.); +#58603 = EDGE_CURVE('',#58604,#58604,#58606,.T.); +#58604 = VERTEX_POINT('',#58605); +#58605 = CARTESIAN_POINT('',(176.5,-146.175,1.51)); +#58606 = CIRCLE('',#58607,0.475); +#58607 = AXIS2_PLACEMENT_3D('',#58608,#58609,#58610); +#58608 = CARTESIAN_POINT('',(176.5,-145.7,1.51)); +#58609 = DIRECTION('',(-0.,0.,-1.)); +#58610 = DIRECTION('',(-0.,-1.,0.)); +#58611 = FACE_BOUND('',#58612,.T.); +#58612 = EDGE_LOOP('',(#58613)); +#58613 = ORIENTED_EDGE('',*,*,#58614,.T.); +#58614 = EDGE_CURVE('',#58615,#58615,#58617,.T.); +#58615 = VERTEX_POINT('',#58616); +#58616 = CARTESIAN_POINT('',(176.5,-143.675,1.51)); +#58617 = CIRCLE('',#58618,0.475); +#58618 = AXIS2_PLACEMENT_3D('',#58619,#58620,#58621); +#58619 = CARTESIAN_POINT('',(176.5,-143.2,1.51)); +#58620 = DIRECTION('',(-0.,0.,-1.)); +#58621 = DIRECTION('',(-0.,-1.,0.)); +#58622 = FACE_BOUND('',#58623,.T.); +#58623 = EDGE_LOOP('',(#58624)); +#58624 = ORIENTED_EDGE('',*,*,#58625,.T.); +#58625 = EDGE_CURVE('',#58626,#58626,#58628,.T.); +#58626 = VERTEX_POINT('',#58627); +#58627 = CARTESIAN_POINT('',(176.5,-141.175,1.51)); +#58628 = CIRCLE('',#58629,0.475); +#58629 = AXIS2_PLACEMENT_3D('',#58630,#58631,#58632); +#58630 = CARTESIAN_POINT('',(176.5,-140.7,1.51)); +#58631 = DIRECTION('',(-0.,0.,-1.)); +#58632 = DIRECTION('',(-0.,-1.,0.)); +#58633 = FACE_BOUND('',#58634,.T.); +#58634 = EDGE_LOOP('',(#58635)); +#58635 = ORIENTED_EDGE('',*,*,#58636,.T.); +#58636 = EDGE_CURVE('',#58637,#58637,#58639,.T.); +#58637 = VERTEX_POINT('',#58638); +#58638 = CARTESIAN_POINT('',(176.5,-135.075,1.51)); +#58639 = CIRCLE('',#58640,0.475); +#58640 = AXIS2_PLACEMENT_3D('',#58641,#58642,#58643); +#58641 = CARTESIAN_POINT('',(176.5,-134.6,1.51)); +#58642 = DIRECTION('',(-0.,0.,-1.)); +#58643 = DIRECTION('',(-0.,-1.,0.)); +#58644 = FACE_BOUND('',#58645,.T.); +#58645 = EDGE_LOOP('',(#58646)); +#58646 = ORIENTED_EDGE('',*,*,#58647,.T.); +#58647 = EDGE_CURVE('',#58648,#58648,#58650,.T.); +#58648 = VERTEX_POINT('',#58649); +#58649 = CARTESIAN_POINT('',(176.5,-132.575,1.51)); +#58650 = CIRCLE('',#58651,0.475); +#58651 = AXIS2_PLACEMENT_3D('',#58652,#58653,#58654); +#58652 = CARTESIAN_POINT('',(176.5,-132.1,1.51)); +#58653 = DIRECTION('',(-0.,0.,-1.)); +#58654 = DIRECTION('',(-0.,-1.,0.)); +#58655 = FACE_BOUND('',#58656,.T.); +#58656 = EDGE_LOOP('',(#58657,#58668,#58676,#58685)); +#58657 = ORIENTED_EDGE('',*,*,#58658,.T.); +#58658 = EDGE_CURVE('',#58659,#58661,#58663,.T.); +#58659 = VERTEX_POINT('',#58660); +#58660 = CARTESIAN_POINT('',(104.55,-130.,1.51)); +#58661 = VERTEX_POINT('',#58662); +#58662 = CARTESIAN_POINT('',(104.55,-129.,1.51)); +#58663 = CIRCLE('',#58664,0.5); +#58664 = AXIS2_PLACEMENT_3D('',#58665,#58666,#58667); +#58665 = CARTESIAN_POINT('',(104.55,-129.5,1.51)); +#58666 = DIRECTION('',(-0.,0.,-1.)); +#58667 = DIRECTION('',(0.,1.,0.)); +#58668 = ORIENTED_EDGE('',*,*,#58669,.T.); +#58669 = EDGE_CURVE('',#58661,#58670,#58672,.T.); +#58670 = VERTEX_POINT('',#58671); +#58671 = CARTESIAN_POINT('',(106.05,-129.,1.51)); +#58672 = LINE('',#58673,#58674); +#58673 = CARTESIAN_POINT('',(53.025,-129.,1.51)); +#58674 = VECTOR('',#58675,1.); +#58675 = DIRECTION('',(1.,0.,-0.)); +#58676 = ORIENTED_EDGE('',*,*,#58677,.T.); +#58677 = EDGE_CURVE('',#58670,#58678,#58680,.T.); +#58678 = VERTEX_POINT('',#58679); +#58679 = CARTESIAN_POINT('',(106.05,-130.,1.51)); +#58680 = CIRCLE('',#58681,0.5); +#58681 = AXIS2_PLACEMENT_3D('',#58682,#58683,#58684); +#58682 = CARTESIAN_POINT('',(106.05,-129.5,1.51)); +#58683 = DIRECTION('',(-0.,0.,-1.)); +#58684 = DIRECTION('',(-0.,-1.,0.)); +#58685 = ORIENTED_EDGE('',*,*,#58686,.T.); +#58686 = EDGE_CURVE('',#58678,#58659,#58687,.T.); +#58687 = LINE('',#58688,#58689); +#58688 = CARTESIAN_POINT('',(52.275,-130.,1.51)); +#58689 = VECTOR('',#58690,1.); +#58690 = DIRECTION('',(-1.,0.,0.)); +#58691 = FACE_BOUND('',#58692,.T.); +#58692 = EDGE_LOOP('',(#58693)); +#58693 = ORIENTED_EDGE('',*,*,#58694,.T.); +#58694 = EDGE_CURVE('',#58695,#58695,#58697,.T.); +#58695 = VERTEX_POINT('',#58696); +#58696 = CARTESIAN_POINT('',(103.3,-125.8,1.51)); +#58697 = CIRCLE('',#58698,0.8); +#58698 = AXIS2_PLACEMENT_3D('',#58699,#58700,#58701); +#58699 = CARTESIAN_POINT('',(103.3,-125.,1.51)); +#58700 = DIRECTION('',(-0.,0.,-1.)); +#58701 = DIRECTION('',(-0.,-1.,0.)); +#58702 = FACE_BOUND('',#58703,.T.); +#58703 = EDGE_LOOP('',(#58704,#58715,#58723,#58732)); +#58704 = ORIENTED_EDGE('',*,*,#58705,.T.); +#58705 = EDGE_CURVE('',#58706,#58708,#58710,.T.); +#58706 = VERTEX_POINT('',#58707); +#58707 = CARTESIAN_POINT('',(106.8,-125.65,1.51)); +#58708 = VERTEX_POINT('',#58709); +#58709 = CARTESIAN_POINT('',(105.8,-125.65,1.51)); +#58710 = CIRCLE('',#58711,0.5); +#58711 = AXIS2_PLACEMENT_3D('',#58712,#58713,#58714); +#58712 = CARTESIAN_POINT('',(106.3,-125.65,1.51)); +#58713 = DIRECTION('',(-0.,0.,-1.)); +#58714 = DIRECTION('',(-1.,0.,0.)); +#58715 = ORIENTED_EDGE('',*,*,#58716,.T.); +#58716 = EDGE_CURVE('',#58708,#58717,#58719,.T.); +#58717 = VERTEX_POINT('',#58718); +#58718 = CARTESIAN_POINT('',(105.8,-124.35,1.51)); +#58719 = LINE('',#58720,#58721); +#58720 = CARTESIAN_POINT('',(105.8,-62.175,1.51)); +#58721 = VECTOR('',#58722,1.); +#58722 = DIRECTION('',(-0.,1.,0.)); +#58723 = ORIENTED_EDGE('',*,*,#58724,.T.); +#58724 = EDGE_CURVE('',#58717,#58725,#58727,.T.); +#58725 = VERTEX_POINT('',#58726); +#58726 = CARTESIAN_POINT('',(106.8,-124.35,1.51)); +#58727 = CIRCLE('',#58728,0.5); +#58728 = AXIS2_PLACEMENT_3D('',#58729,#58730,#58731); +#58729 = CARTESIAN_POINT('',(106.3,-124.35,1.51)); +#58730 = DIRECTION('',(0.,-0.,-1.)); +#58731 = DIRECTION('',(1.,0.,-0.)); +#58732 = ORIENTED_EDGE('',*,*,#58733,.T.); +#58733 = EDGE_CURVE('',#58725,#58706,#58734,.T.); +#58734 = LINE('',#58735,#58736); +#58735 = CARTESIAN_POINT('',(106.8,-62.825,1.51)); +#58736 = VECTOR('',#58737,1.); +#58737 = DIRECTION('',(0.,-1.,0.)); +#58738 = FACE_BOUND('',#58739,.T.); +#58739 = EDGE_LOOP('',(#58740,#58751,#58759,#58768)); +#58740 = ORIENTED_EDGE('',*,*,#58741,.T.); +#58741 = EDGE_CURVE('',#58742,#58744,#58746,.T.); +#58742 = VERTEX_POINT('',#58743); +#58743 = CARTESIAN_POINT('',(112.8,-126.,1.51)); +#58744 = VERTEX_POINT('',#58745); +#58745 = CARTESIAN_POINT('',(111.8,-126.,1.51)); +#58746 = CIRCLE('',#58747,0.5); +#58747 = AXIS2_PLACEMENT_3D('',#58748,#58749,#58750); +#58748 = CARTESIAN_POINT('',(112.3,-126.,1.51)); +#58749 = DIRECTION('',(-0.,0.,-1.)); +#58750 = DIRECTION('',(-1.,0.,0.)); +#58751 = ORIENTED_EDGE('',*,*,#58752,.T.); +#58752 = EDGE_CURVE('',#58744,#58753,#58755,.T.); +#58753 = VERTEX_POINT('',#58754); +#58754 = CARTESIAN_POINT('',(111.8,-124.,1.51)); +#58755 = LINE('',#58756,#58757); +#58756 = CARTESIAN_POINT('',(111.8,-62.,1.51)); +#58757 = VECTOR('',#58758,1.); +#58758 = DIRECTION('',(-0.,1.,0.)); +#58759 = ORIENTED_EDGE('',*,*,#58760,.T.); +#58760 = EDGE_CURVE('',#58753,#58761,#58763,.T.); +#58761 = VERTEX_POINT('',#58762); +#58762 = CARTESIAN_POINT('',(112.8,-124.,1.51)); +#58763 = CIRCLE('',#58764,0.5); +#58764 = AXIS2_PLACEMENT_3D('',#58765,#58766,#58767); +#58765 = CARTESIAN_POINT('',(112.3,-124.,1.51)); +#58766 = DIRECTION('',(0.,-0.,-1.)); +#58767 = DIRECTION('',(1.,0.,-0.)); +#58768 = ORIENTED_EDGE('',*,*,#58769,.T.); +#58769 = EDGE_CURVE('',#58761,#58742,#58770,.T.); +#58770 = LINE('',#58771,#58772); +#58771 = CARTESIAN_POINT('',(112.8,-63.,1.51)); +#58772 = VECTOR('',#58773,1.); +#58773 = DIRECTION('',(0.,-1.,0.)); +#58774 = FACE_BOUND('',#58775,.T.); +#58775 = EDGE_LOOP('',(#58776,#58787,#58795,#58804)); +#58776 = ORIENTED_EDGE('',*,*,#58777,.T.); +#58777 = EDGE_CURVE('',#58778,#58780,#58782,.T.); +#58778 = VERTEX_POINT('',#58779); +#58779 = CARTESIAN_POINT('',(104.55,-121.,1.51)); +#58780 = VERTEX_POINT('',#58781); +#58781 = CARTESIAN_POINT('',(104.55,-120.,1.51)); +#58782 = CIRCLE('',#58783,0.5); +#58783 = AXIS2_PLACEMENT_3D('',#58784,#58785,#58786); +#58784 = CARTESIAN_POINT('',(104.55,-120.5,1.51)); +#58785 = DIRECTION('',(-0.,0.,-1.)); +#58786 = DIRECTION('',(0.,1.,0.)); +#58787 = ORIENTED_EDGE('',*,*,#58788,.T.); +#58788 = EDGE_CURVE('',#58780,#58789,#58791,.T.); +#58789 = VERTEX_POINT('',#58790); +#58790 = CARTESIAN_POINT('',(106.05,-120.,1.51)); +#58791 = LINE('',#58792,#58793); +#58792 = CARTESIAN_POINT('',(53.025,-120.,1.51)); +#58793 = VECTOR('',#58794,1.); +#58794 = DIRECTION('',(1.,0.,-0.)); +#58795 = ORIENTED_EDGE('',*,*,#58796,.T.); +#58796 = EDGE_CURVE('',#58789,#58797,#58799,.T.); +#58797 = VERTEX_POINT('',#58798); +#58798 = CARTESIAN_POINT('',(106.05,-121.,1.51)); +#58799 = CIRCLE('',#58800,0.5); +#58800 = AXIS2_PLACEMENT_3D('',#58801,#58802,#58803); +#58801 = CARTESIAN_POINT('',(106.05,-120.5,1.51)); +#58802 = DIRECTION('',(-0.,0.,-1.)); +#58803 = DIRECTION('',(-0.,-1.,0.)); +#58804 = ORIENTED_EDGE('',*,*,#58805,.T.); +#58805 = EDGE_CURVE('',#58797,#58778,#58806,.T.); +#58806 = LINE('',#58807,#58808); +#58807 = CARTESIAN_POINT('',(52.275,-121.,1.51)); +#58808 = VECTOR('',#58809,1.); +#58809 = DIRECTION('',(-1.,0.,0.)); +#58810 = FACE_BOUND('',#58811,.T.); +#58811 = EDGE_LOOP('',(#58812)); +#58812 = ORIENTED_EDGE('',*,*,#58813,.T.); +#58813 = EDGE_CURVE('',#58814,#58814,#58816,.T.); +#58814 = VERTEX_POINT('',#58815); +#58815 = CARTESIAN_POINT('',(104.5,-111.375,1.51)); +#58816 = CIRCLE('',#58817,0.475); +#58817 = AXIS2_PLACEMENT_3D('',#58818,#58819,#58820); +#58818 = CARTESIAN_POINT('',(104.5,-110.9,1.51)); +#58819 = DIRECTION('',(-0.,0.,-1.)); +#58820 = DIRECTION('',(-0.,-1.,0.)); +#58821 = FACE_BOUND('',#58822,.T.); +#58822 = EDGE_LOOP('',(#58823)); +#58823 = ORIENTED_EDGE('',*,*,#58824,.T.); +#58824 = EDGE_CURVE('',#58825,#58825,#58827,.T.); +#58825 = VERTEX_POINT('',#58826); +#58826 = CARTESIAN_POINT('',(120.32,-115.,1.51)); +#58827 = CIRCLE('',#58828,0.4); +#58828 = AXIS2_PLACEMENT_3D('',#58829,#58830,#58831); +#58829 = CARTESIAN_POINT('',(120.32,-114.6,1.51)); +#58830 = DIRECTION('',(-0.,0.,-1.)); +#58831 = DIRECTION('',(-0.,-1.,0.)); +#58832 = FACE_BOUND('',#58833,.T.); +#58833 = EDGE_LOOP('',(#58834)); +#58834 = ORIENTED_EDGE('',*,*,#58835,.T.); +#58835 = EDGE_CURVE('',#58836,#58836,#58838,.T.); +#58836 = VERTEX_POINT('',#58837); +#58837 = CARTESIAN_POINT('',(104.5,-108.875,1.51)); +#58838 = CIRCLE('',#58839,0.475); +#58839 = AXIS2_PLACEMENT_3D('',#58840,#58841,#58842); +#58840 = CARTESIAN_POINT('',(104.5,-108.4,1.51)); +#58841 = DIRECTION('',(-0.,0.,-1.)); +#58842 = DIRECTION('',(-0.,-1.,0.)); +#58843 = FACE_BOUND('',#58844,.T.); +#58844 = EDGE_LOOP('',(#58845)); +#58845 = ORIENTED_EDGE('',*,*,#58846,.T.); +#58846 = EDGE_CURVE('',#58847,#58847,#58849,.T.); +#58847 = VERTEX_POINT('',#58848); +#58848 = CARTESIAN_POINT('',(104.5,-106.375,1.51)); +#58849 = CIRCLE('',#58850,0.475); +#58850 = AXIS2_PLACEMENT_3D('',#58851,#58852,#58853); +#58851 = CARTESIAN_POINT('',(104.5,-105.9,1.51)); +#58852 = DIRECTION('',(-0.,0.,-1.)); +#58853 = DIRECTION('',(-0.,-1.,0.)); +#58854 = FACE_BOUND('',#58855,.T.); +#58855 = EDGE_LOOP('',(#58856)); +#58856 = ORIENTED_EDGE('',*,*,#58857,.T.); +#58857 = EDGE_CURVE('',#58858,#58858,#58860,.T.); +#58858 = VERTEX_POINT('',#58859); +#58859 = CARTESIAN_POINT('',(104.5,-103.875,1.51)); +#58860 = CIRCLE('',#58861,0.475); +#58861 = AXIS2_PLACEMENT_3D('',#58862,#58863,#58864); +#58862 = CARTESIAN_POINT('',(104.5,-103.4,1.51)); +#58863 = DIRECTION('',(-0.,0.,-1.)); +#58864 = DIRECTION('',(-0.,-1.,0.)); +#58865 = FACE_BOUND('',#58866,.T.); +#58866 = EDGE_LOOP('',(#58867)); +#58867 = ORIENTED_EDGE('',*,*,#58868,.T.); +#58868 = EDGE_CURVE('',#58869,#58869,#58871,.T.); +#58869 = VERTEX_POINT('',#58870); +#58870 = CARTESIAN_POINT('',(115.24,-109.14,1.51)); +#58871 = CIRCLE('',#58872,1.6); +#58872 = AXIS2_PLACEMENT_3D('',#58873,#58874,#58875); +#58873 = CARTESIAN_POINT('',(115.24,-107.54,1.51)); +#58874 = DIRECTION('',(-0.,0.,-1.)); +#58875 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#58876 = FACE_BOUND('',#58877,.T.); +#58877 = EDGE_LOOP('',(#58878)); +#58878 = ORIENTED_EDGE('',*,*,#58879,.T.); +#58879 = EDGE_CURVE('',#58880,#58880,#58882,.T.); +#58880 = VERTEX_POINT('',#58881); +#58881 = CARTESIAN_POINT('',(120.32,-102.3,1.51)); +#58882 = CIRCLE('',#58883,0.4); +#58883 = AXIS2_PLACEMENT_3D('',#58884,#58885,#58886); +#58884 = CARTESIAN_POINT('',(120.32,-101.9,1.51)); +#58885 = DIRECTION('',(-0.,0.,-1.)); +#58886 = DIRECTION('',(-0.,-1.,0.)); +#58887 = FACE_BOUND('',#58888,.T.); +#58888 = EDGE_LOOP('',(#58889)); +#58889 = ORIENTED_EDGE('',*,*,#58890,.T.); +#58890 = EDGE_CURVE('',#58891,#58891,#58893,.T.); +#58891 = VERTEX_POINT('',#58892); +#58892 = CARTESIAN_POINT('',(122.86,-115.,1.51)); +#58893 = CIRCLE('',#58894,0.4); +#58894 = AXIS2_PLACEMENT_3D('',#58895,#58896,#58897); +#58895 = CARTESIAN_POINT('',(122.86,-114.6,1.51)); +#58896 = DIRECTION('',(-0.,0.,-1.)); +#58897 = DIRECTION('',(-0.,-1.,0.)); +#58898 = FACE_BOUND('',#58899,.T.); +#58899 = EDGE_LOOP('',(#58900)); +#58900 = ORIENTED_EDGE('',*,*,#58901,.T.); +#58901 = EDGE_CURVE('',#58902,#58902,#58904,.T.); +#58902 = VERTEX_POINT('',#58903); +#58903 = CARTESIAN_POINT('',(125.4,-115.,1.51)); +#58904 = CIRCLE('',#58905,0.4); +#58905 = AXIS2_PLACEMENT_3D('',#58906,#58907,#58908); +#58906 = CARTESIAN_POINT('',(125.4,-114.6,1.51)); +#58907 = DIRECTION('',(-0.,0.,-1.)); +#58908 = DIRECTION('',(-0.,-1.,0.)); +#58909 = FACE_BOUND('',#58910,.T.); +#58910 = EDGE_LOOP('',(#58911)); +#58911 = ORIENTED_EDGE('',*,*,#58912,.T.); +#58912 = EDGE_CURVE('',#58913,#58913,#58915,.T.); +#58913 = VERTEX_POINT('',#58914); +#58914 = CARTESIAN_POINT('',(127.94,-115.,1.51)); +#58915 = CIRCLE('',#58916,0.4); +#58916 = AXIS2_PLACEMENT_3D('',#58917,#58918,#58919); +#58917 = CARTESIAN_POINT('',(127.94,-114.6,1.51)); +#58918 = DIRECTION('',(-0.,0.,-1.)); +#58919 = DIRECTION('',(-0.,-1.,0.)); +#58920 = FACE_BOUND('',#58921,.T.); +#58921 = EDGE_LOOP('',(#58922)); +#58922 = ORIENTED_EDGE('',*,*,#58923,.T.); +#58923 = EDGE_CURVE('',#58924,#58924,#58926,.T.); +#58924 = VERTEX_POINT('',#58925); +#58925 = CARTESIAN_POINT('',(130.48,-115.,1.51)); +#58926 = CIRCLE('',#58927,0.4); +#58927 = AXIS2_PLACEMENT_3D('',#58928,#58929,#58930); +#58928 = CARTESIAN_POINT('',(130.48,-114.6,1.51)); +#58929 = DIRECTION('',(-0.,0.,-1.)); +#58930 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#58931 = FACE_BOUND('',#58932,.T.); +#58932 = EDGE_LOOP('',(#58933)); +#58933 = ORIENTED_EDGE('',*,*,#58934,.T.); +#58934 = EDGE_CURVE('',#58935,#58935,#58937,.T.); +#58935 = VERTEX_POINT('',#58936); +#58936 = CARTESIAN_POINT('',(133.02,-115.,1.51)); +#58937 = CIRCLE('',#58938,0.4); +#58938 = AXIS2_PLACEMENT_3D('',#58939,#58940,#58941); +#58939 = CARTESIAN_POINT('',(133.02,-114.6,1.51)); +#58940 = DIRECTION('',(-0.,0.,-1.)); +#58941 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#58942 = FACE_BOUND('',#58943,.T.); +#58943 = EDGE_LOOP('',(#58944)); +#58944 = ORIENTED_EDGE('',*,*,#58945,.T.); +#58945 = EDGE_CURVE('',#58946,#58946,#58948,.T.); +#58946 = VERTEX_POINT('',#58947); +#58947 = CARTESIAN_POINT('',(135.56,-115.,1.51)); +#58948 = CIRCLE('',#58949,0.4); +#58949 = AXIS2_PLACEMENT_3D('',#58950,#58951,#58952); +#58950 = CARTESIAN_POINT('',(135.56,-114.6,1.51)); +#58951 = DIRECTION('',(-0.,0.,-1.)); +#58952 = DIRECTION('',(-0.,-1.,0.)); +#58953 = FACE_BOUND('',#58954,.T.); +#58954 = EDGE_LOOP('',(#58955)); +#58955 = ORIENTED_EDGE('',*,*,#58956,.T.); +#58956 = EDGE_CURVE('',#58957,#58957,#58959,.T.); +#58957 = VERTEX_POINT('',#58958); +#58958 = CARTESIAN_POINT('',(138.1,-115.,1.51)); +#58959 = CIRCLE('',#58960,0.4); +#58960 = AXIS2_PLACEMENT_3D('',#58961,#58962,#58963); +#58961 = CARTESIAN_POINT('',(138.1,-114.6,1.51)); +#58962 = DIRECTION('',(-0.,0.,-1.)); +#58963 = DIRECTION('',(-0.,-1.,0.)); +#58964 = FACE_BOUND('',#58965,.T.); +#58965 = EDGE_LOOP('',(#58966)); +#58966 = ORIENTED_EDGE('',*,*,#58967,.T.); +#58967 = EDGE_CURVE('',#58968,#58968,#58970,.T.); +#58968 = VERTEX_POINT('',#58969); +#58969 = CARTESIAN_POINT('',(122.86,-102.3,1.51)); +#58970 = CIRCLE('',#58971,0.4); +#58971 = AXIS2_PLACEMENT_3D('',#58972,#58973,#58974); +#58972 = CARTESIAN_POINT('',(122.86,-101.9,1.51)); +#58973 = DIRECTION('',(-0.,0.,-1.)); +#58974 = DIRECTION('',(-0.,-1.,0.)); +#58975 = FACE_BOUND('',#58976,.T.); +#58976 = EDGE_LOOP('',(#58977)); +#58977 = ORIENTED_EDGE('',*,*,#58978,.T.); +#58978 = EDGE_CURVE('',#58979,#58979,#58981,.T.); +#58979 = VERTEX_POINT('',#58980); +#58980 = CARTESIAN_POINT('',(125.4,-102.3,1.51)); +#58981 = CIRCLE('',#58982,0.4); +#58982 = AXIS2_PLACEMENT_3D('',#58983,#58984,#58985); +#58983 = CARTESIAN_POINT('',(125.4,-101.9,1.51)); +#58984 = DIRECTION('',(-0.,0.,-1.)); +#58985 = DIRECTION('',(-0.,-1.,0.)); +#58986 = FACE_BOUND('',#58987,.T.); +#58987 = EDGE_LOOP('',(#58988)); +#58988 = ORIENTED_EDGE('',*,*,#58989,.T.); +#58989 = EDGE_CURVE('',#58990,#58990,#58992,.T.); +#58990 = VERTEX_POINT('',#58991); +#58991 = CARTESIAN_POINT('',(127.94,-102.3,1.51)); +#58992 = CIRCLE('',#58993,0.4); +#58993 = AXIS2_PLACEMENT_3D('',#58994,#58995,#58996); +#58994 = CARTESIAN_POINT('',(127.94,-101.9,1.51)); +#58995 = DIRECTION('',(-0.,0.,-1.)); +#58996 = DIRECTION('',(-0.,-1.,0.)); +#58997 = FACE_BOUND('',#58998,.T.); +#58998 = EDGE_LOOP('',(#58999)); +#58999 = ORIENTED_EDGE('',*,*,#59000,.T.); +#59000 = EDGE_CURVE('',#59001,#59001,#59003,.T.); +#59001 = VERTEX_POINT('',#59002); +#59002 = CARTESIAN_POINT('',(130.48,-102.3,1.51)); +#59003 = CIRCLE('',#59004,0.4); +#59004 = AXIS2_PLACEMENT_3D('',#59005,#59006,#59007); +#59005 = CARTESIAN_POINT('',(130.48,-101.9,1.51)); +#59006 = DIRECTION('',(-0.,0.,-1.)); +#59007 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#59008 = FACE_BOUND('',#59009,.T.); +#59009 = EDGE_LOOP('',(#59010)); +#59010 = ORIENTED_EDGE('',*,*,#59011,.T.); +#59011 = EDGE_CURVE('',#59012,#59012,#59014,.T.); +#59012 = VERTEX_POINT('',#59013); +#59013 = CARTESIAN_POINT('',(133.02,-102.3,1.51)); +#59014 = CIRCLE('',#59015,0.4); +#59015 = AXIS2_PLACEMENT_3D('',#59016,#59017,#59018); +#59016 = CARTESIAN_POINT('',(133.02,-101.9,1.51)); +#59017 = DIRECTION('',(-0.,0.,-1.)); +#59018 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#59019 = FACE_BOUND('',#59020,.T.); +#59020 = EDGE_LOOP('',(#59021)); +#59021 = ORIENTED_EDGE('',*,*,#59022,.T.); +#59022 = EDGE_CURVE('',#59023,#59023,#59025,.T.); +#59023 = VERTEX_POINT('',#59024); +#59024 = CARTESIAN_POINT('',(135.56,-102.3,1.51)); +#59025 = CIRCLE('',#59026,0.4); +#59026 = AXIS2_PLACEMENT_3D('',#59027,#59028,#59029); +#59027 = CARTESIAN_POINT('',(135.56,-101.9,1.51)); +#59028 = DIRECTION('',(-0.,0.,-1.)); +#59029 = DIRECTION('',(-0.,-1.,0.)); +#59030 = FACE_BOUND('',#59031,.T.); +#59031 = EDGE_LOOP('',(#59032)); +#59032 = ORIENTED_EDGE('',*,*,#59033,.T.); +#59033 = EDGE_CURVE('',#59034,#59034,#59036,.T.); +#59034 = VERTEX_POINT('',#59035); +#59035 = CARTESIAN_POINT('',(138.1,-102.3,1.51)); +#59036 = CIRCLE('',#59037,0.4); +#59037 = AXIS2_PLACEMENT_3D('',#59038,#59039,#59040); +#59038 = CARTESIAN_POINT('',(138.1,-101.9,1.51)); +#59039 = DIRECTION('',(-0.,0.,-1.)); +#59040 = DIRECTION('',(-0.,-1.,0.)); +#59041 = FACE_BOUND('',#59042,.T.); +#59042 = EDGE_LOOP('',(#59043)); +#59043 = ORIENTED_EDGE('',*,*,#59044,.T.); +#59044 = EDGE_CURVE('',#59045,#59045,#59047,.T.); +#59045 = VERTEX_POINT('',#59046); +#59046 = CARTESIAN_POINT('',(176.5,-130.075,1.51)); +#59047 = CIRCLE('',#59048,0.475); +#59048 = AXIS2_PLACEMENT_3D('',#59049,#59050,#59051); +#59049 = CARTESIAN_POINT('',(176.5,-129.6,1.51)); +#59050 = DIRECTION('',(-0.,0.,-1.)); +#59051 = DIRECTION('',(-0.,-1.,0.)); +#59052 = FACE_BOUND('',#59053,.T.); +#59053 = EDGE_LOOP('',(#59054)); +#59054 = ORIENTED_EDGE('',*,*,#59055,.T.); +#59055 = EDGE_CURVE('',#59056,#59056,#59058,.T.); +#59056 = VERTEX_POINT('',#59057); +#59057 = CARTESIAN_POINT('',(176.5,-123.975,1.51)); +#59058 = CIRCLE('',#59059,0.475); +#59059 = AXIS2_PLACEMENT_3D('',#59060,#59061,#59062); +#59060 = CARTESIAN_POINT('',(176.5,-123.5,1.51)); +#59061 = DIRECTION('',(-0.,0.,-1.)); +#59062 = DIRECTION('',(-0.,-1.,0.)); +#59063 = FACE_BOUND('',#59064,.T.); +#59064 = EDGE_LOOP('',(#59065)); +#59065 = ORIENTED_EDGE('',*,*,#59066,.T.); +#59066 = EDGE_CURVE('',#59067,#59067,#59069,.T.); +#59067 = VERTEX_POINT('',#59068); +#59068 = CARTESIAN_POINT('',(166.04,-124.38,1.51)); +#59069 = CIRCLE('',#59070,1.6); +#59070 = AXIS2_PLACEMENT_3D('',#59071,#59072,#59073); +#59071 = CARTESIAN_POINT('',(166.04,-122.78,1.51)); +#59072 = DIRECTION('',(-0.,0.,-1.)); +#59073 = DIRECTION('',(-0.,-1.,0.)); +#59074 = FACE_BOUND('',#59075,.T.); +#59075 = EDGE_LOOP('',(#59076)); +#59076 = ORIENTED_EDGE('',*,*,#59077,.T.); +#59077 = EDGE_CURVE('',#59078,#59078,#59080,.T.); +#59078 = VERTEX_POINT('',#59079); +#59079 = CARTESIAN_POINT('',(176.5,-121.475,1.51)); +#59080 = CIRCLE('',#59081,0.475); +#59081 = AXIS2_PLACEMENT_3D('',#59082,#59083,#59084); +#59082 = CARTESIAN_POINT('',(176.5,-121.,1.51)); +#59083 = DIRECTION('',(-0.,0.,-1.)); +#59084 = DIRECTION('',(-0.,-1.,0.)); +#59085 = FACE_BOUND('',#59086,.T.); +#59086 = EDGE_LOOP('',(#59087)); +#59087 = ORIENTED_EDGE('',*,*,#59088,.T.); +#59088 = EDGE_CURVE('',#59089,#59089,#59091,.T.); +#59089 = VERTEX_POINT('',#59090); +#59090 = CARTESIAN_POINT('',(176.5,-118.975,1.51)); +#59091 = CIRCLE('',#59092,0.475); +#59092 = AXIS2_PLACEMENT_3D('',#59093,#59094,#59095); +#59093 = CARTESIAN_POINT('',(176.5,-118.5,1.51)); +#59094 = DIRECTION('',(-0.,0.,-1.)); +#59095 = DIRECTION('',(-0.,-1.,0.)); +#59096 = FACE_BOUND('',#59097,.T.); +#59097 = EDGE_LOOP('',(#59098)); +#59098 = ORIENTED_EDGE('',*,*,#59099,.T.); +#59099 = EDGE_CURVE('',#59100,#59100,#59102,.T.); +#59100 = VERTEX_POINT('',#59101); +#59101 = CARTESIAN_POINT('',(141.32,-115.,1.51)); +#59102 = CIRCLE('',#59103,0.4); +#59103 = AXIS2_PLACEMENT_3D('',#59104,#59105,#59106); +#59104 = CARTESIAN_POINT('',(141.32,-114.6,1.51)); +#59105 = DIRECTION('',(-0.,0.,-1.)); +#59106 = DIRECTION('',(-0.,-1.,0.)); +#59107 = FACE_BOUND('',#59108,.T.); +#59108 = EDGE_LOOP('',(#59109)); +#59109 = ORIENTED_EDGE('',*,*,#59110,.T.); +#59110 = EDGE_CURVE('',#59111,#59111,#59113,.T.); +#59111 = VERTEX_POINT('',#59112); +#59112 = CARTESIAN_POINT('',(143.86,-115.,1.51)); +#59113 = CIRCLE('',#59114,0.4); +#59114 = AXIS2_PLACEMENT_3D('',#59115,#59116,#59117); +#59115 = CARTESIAN_POINT('',(143.86,-114.6,1.51)); +#59116 = DIRECTION('',(-0.,0.,-1.)); +#59117 = DIRECTION('',(-0.,-1.,0.)); +#59118 = FACE_BOUND('',#59119,.T.); +#59119 = EDGE_LOOP('',(#59120)); +#59120 = ORIENTED_EDGE('',*,*,#59121,.T.); +#59121 = EDGE_CURVE('',#59122,#59122,#59124,.T.); +#59122 = VERTEX_POINT('',#59123); +#59123 = CARTESIAN_POINT('',(146.4,-115.,1.51)); +#59124 = CIRCLE('',#59125,0.4); +#59125 = AXIS2_PLACEMENT_3D('',#59126,#59127,#59128); +#59126 = CARTESIAN_POINT('',(146.4,-114.6,1.51)); +#59127 = DIRECTION('',(-0.,0.,-1.)); +#59128 = DIRECTION('',(-0.,-1.,0.)); +#59129 = FACE_BOUND('',#59130,.T.); +#59130 = EDGE_LOOP('',(#59131)); +#59131 = ORIENTED_EDGE('',*,*,#59132,.T.); +#59132 = EDGE_CURVE('',#59133,#59133,#59135,.T.); +#59133 = VERTEX_POINT('',#59134); +#59134 = CARTESIAN_POINT('',(148.94,-115.,1.51)); +#59135 = CIRCLE('',#59136,0.4); +#59136 = AXIS2_PLACEMENT_3D('',#59137,#59138,#59139); +#59137 = CARTESIAN_POINT('',(148.94,-114.6,1.51)); +#59138 = DIRECTION('',(-0.,0.,-1.)); +#59139 = DIRECTION('',(-0.,-1.,0.)); +#59140 = FACE_BOUND('',#59141,.T.); +#59141 = EDGE_LOOP('',(#59142)); +#59142 = ORIENTED_EDGE('',*,*,#59143,.T.); +#59143 = EDGE_CURVE('',#59144,#59144,#59146,.T.); +#59144 = VERTEX_POINT('',#59145); +#59145 = CARTESIAN_POINT('',(151.48,-115.,1.51)); +#59146 = CIRCLE('',#59147,0.4); +#59147 = AXIS2_PLACEMENT_3D('',#59148,#59149,#59150); +#59148 = CARTESIAN_POINT('',(151.48,-114.6,1.51)); +#59149 = DIRECTION('',(-0.,0.,-1.)); +#59150 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#59151 = FACE_BOUND('',#59152,.T.); +#59152 = EDGE_LOOP('',(#59153)); +#59153 = ORIENTED_EDGE('',*,*,#59154,.T.); +#59154 = EDGE_CURVE('',#59155,#59155,#59157,.T.); +#59155 = VERTEX_POINT('',#59156); +#59156 = CARTESIAN_POINT('',(154.02,-115.,1.51)); +#59157 = CIRCLE('',#59158,0.4); +#59158 = AXIS2_PLACEMENT_3D('',#59159,#59160,#59161); +#59159 = CARTESIAN_POINT('',(154.02,-114.6,1.51)); +#59160 = DIRECTION('',(-0.,0.,-1.)); +#59161 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#59162 = FACE_BOUND('',#59163,.T.); +#59163 = EDGE_LOOP('',(#59164)); +#59164 = ORIENTED_EDGE('',*,*,#59165,.T.); +#59165 = EDGE_CURVE('',#59166,#59166,#59168,.T.); +#59166 = VERTEX_POINT('',#59167); +#59167 = CARTESIAN_POINT('',(156.56,-115.,1.51)); +#59168 = CIRCLE('',#59169,0.4); +#59169 = AXIS2_PLACEMENT_3D('',#59170,#59171,#59172); +#59170 = CARTESIAN_POINT('',(156.56,-114.6,1.51)); +#59171 = DIRECTION('',(-0.,0.,-1.)); +#59172 = DIRECTION('',(-0.,-1.,0.)); +#59173 = FACE_BOUND('',#59174,.T.); +#59174 = EDGE_LOOP('',(#59175)); +#59175 = ORIENTED_EDGE('',*,*,#59176,.T.); +#59176 = EDGE_CURVE('',#59177,#59177,#59179,.T.); +#59177 = VERTEX_POINT('',#59178); +#59178 = CARTESIAN_POINT('',(141.32,-102.3,1.51)); +#59179 = CIRCLE('',#59180,0.4); +#59180 = AXIS2_PLACEMENT_3D('',#59181,#59182,#59183); +#59181 = CARTESIAN_POINT('',(141.32,-101.9,1.51)); +#59182 = DIRECTION('',(-0.,0.,-1.)); +#59183 = DIRECTION('',(-0.,-1.,0.)); +#59184 = FACE_BOUND('',#59185,.T.); +#59185 = EDGE_LOOP('',(#59186)); +#59186 = ORIENTED_EDGE('',*,*,#59187,.T.); +#59187 = EDGE_CURVE('',#59188,#59188,#59190,.T.); +#59188 = VERTEX_POINT('',#59189); +#59189 = CARTESIAN_POINT('',(143.86,-102.3,1.51)); +#59190 = CIRCLE('',#59191,0.4); +#59191 = AXIS2_PLACEMENT_3D('',#59192,#59193,#59194); +#59192 = CARTESIAN_POINT('',(143.86,-101.9,1.51)); +#59193 = DIRECTION('',(-0.,0.,-1.)); +#59194 = DIRECTION('',(-0.,-1.,0.)); +#59195 = FACE_BOUND('',#59196,.T.); +#59196 = EDGE_LOOP('',(#59197)); +#59197 = ORIENTED_EDGE('',*,*,#59198,.T.); +#59198 = EDGE_CURVE('',#59199,#59199,#59201,.T.); +#59199 = VERTEX_POINT('',#59200); +#59200 = CARTESIAN_POINT('',(146.4,-102.3,1.51)); +#59201 = CIRCLE('',#59202,0.4); +#59202 = AXIS2_PLACEMENT_3D('',#59203,#59204,#59205); +#59203 = CARTESIAN_POINT('',(146.4,-101.9,1.51)); +#59204 = DIRECTION('',(-0.,0.,-1.)); +#59205 = DIRECTION('',(-0.,-1.,0.)); +#59206 = FACE_BOUND('',#59207,.T.); +#59207 = EDGE_LOOP('',(#59208)); +#59208 = ORIENTED_EDGE('',*,*,#59209,.T.); +#59209 = EDGE_CURVE('',#59210,#59210,#59212,.T.); +#59210 = VERTEX_POINT('',#59211); +#59211 = CARTESIAN_POINT('',(148.94,-102.3,1.51)); +#59212 = CIRCLE('',#59213,0.4); +#59213 = AXIS2_PLACEMENT_3D('',#59214,#59215,#59216); +#59214 = CARTESIAN_POINT('',(148.94,-101.9,1.51)); +#59215 = DIRECTION('',(-0.,0.,-1.)); +#59216 = DIRECTION('',(-0.,-1.,0.)); +#59217 = FACE_BOUND('',#59218,.T.); +#59218 = EDGE_LOOP('',(#59219)); +#59219 = ORIENTED_EDGE('',*,*,#59220,.T.); +#59220 = EDGE_CURVE('',#59221,#59221,#59223,.T.); +#59221 = VERTEX_POINT('',#59222); +#59222 = CARTESIAN_POINT('',(151.48,-102.3,1.51)); +#59223 = CIRCLE('',#59224,0.4); +#59224 = AXIS2_PLACEMENT_3D('',#59225,#59226,#59227); +#59225 = CARTESIAN_POINT('',(151.48,-101.9,1.51)); +#59226 = DIRECTION('',(-0.,0.,-1.)); +#59227 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#59228 = FACE_BOUND('',#59229,.T.); +#59229 = EDGE_LOOP('',(#59230)); +#59230 = ORIENTED_EDGE('',*,*,#59231,.T.); +#59231 = EDGE_CURVE('',#59232,#59232,#59234,.T.); +#59232 = VERTEX_POINT('',#59233); +#59233 = CARTESIAN_POINT('',(154.02,-102.3,1.51)); +#59234 = CIRCLE('',#59235,0.4); +#59235 = AXIS2_PLACEMENT_3D('',#59236,#59237,#59238); +#59236 = CARTESIAN_POINT('',(154.02,-101.9,1.51)); +#59237 = DIRECTION('',(-0.,0.,-1.)); +#59238 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#59239 = FACE_BOUND('',#59240,.T.); +#59240 = EDGE_LOOP('',(#59241)); +#59241 = ORIENTED_EDGE('',*,*,#59242,.T.); +#59242 = EDGE_CURVE('',#59243,#59243,#59245,.T.); +#59243 = VERTEX_POINT('',#59244); +#59244 = CARTESIAN_POINT('',(156.56,-102.3,1.51)); +#59245 = CIRCLE('',#59246,0.4); +#59246 = AXIS2_PLACEMENT_3D('',#59247,#59248,#59249); +#59247 = CARTESIAN_POINT('',(156.56,-101.9,1.51)); +#59248 = DIRECTION('',(-0.,0.,-1.)); +#59249 = DIRECTION('',(-0.,-1.,0.)); +#59250 = FACE_BOUND('',#59251,.T.); +#59251 = EDGE_LOOP('',(#59252)); +#59252 = ORIENTED_EDGE('',*,*,#59253,.T.); +#59253 = EDGE_CURVE('',#59254,#59254,#59256,.T.); +#59254 = VERTEX_POINT('',#59255); +#59255 = CARTESIAN_POINT('',(159.1,-115.,1.51)); +#59256 = CIRCLE('',#59257,0.4); +#59257 = AXIS2_PLACEMENT_3D('',#59258,#59259,#59260); +#59258 = CARTESIAN_POINT('',(159.1,-114.6,1.51)); +#59259 = DIRECTION('',(-0.,0.,-1.)); +#59260 = DIRECTION('',(-0.,-1.,0.)); +#59261 = FACE_BOUND('',#59262,.T.); +#59262 = EDGE_LOOP('',(#59263)); +#59263 = ORIENTED_EDGE('',*,*,#59264,.T.); +#59264 = EDGE_CURVE('',#59265,#59265,#59267,.T.); +#59265 = VERTEX_POINT('',#59266); +#59266 = CARTESIAN_POINT('',(176.5,-111.375,1.51)); +#59267 = CIRCLE('',#59268,0.475); +#59268 = AXIS2_PLACEMENT_3D('',#59269,#59270,#59271); +#59269 = CARTESIAN_POINT('',(176.5,-110.9,1.51)); +#59270 = DIRECTION('',(-0.,0.,-1.)); +#59271 = DIRECTION('',(-0.,-1.,0.)); +#59272 = FACE_BOUND('',#59273,.T.); +#59273 = EDGE_LOOP('',(#59274)); +#59274 = ORIENTED_EDGE('',*,*,#59275,.T.); +#59275 = EDGE_CURVE('',#59276,#59276,#59278,.T.); +#59276 = VERTEX_POINT('',#59277); +#59277 = CARTESIAN_POINT('',(159.1,-102.3,1.51)); +#59278 = CIRCLE('',#59279,0.4); +#59279 = AXIS2_PLACEMENT_3D('',#59280,#59281,#59282); +#59280 = CARTESIAN_POINT('',(159.1,-101.9,1.51)); +#59281 = DIRECTION('',(-0.,0.,-1.)); +#59282 = DIRECTION('',(-0.,-1.,0.)); +#59283 = FACE_BOUND('',#59284,.T.); +#59284 = EDGE_LOOP('',(#59285)); +#59285 = ORIENTED_EDGE('',*,*,#59286,.T.); +#59286 = EDGE_CURVE('',#59287,#59287,#59289,.T.); +#59287 = VERTEX_POINT('',#59288); +#59288 = CARTESIAN_POINT('',(176.5,-108.875,1.51)); +#59289 = CIRCLE('',#59290,0.475); +#59290 = AXIS2_PLACEMENT_3D('',#59291,#59292,#59293); +#59291 = CARTESIAN_POINT('',(176.5,-108.4,1.51)); +#59292 = DIRECTION('',(-0.,0.,-1.)); +#59293 = DIRECTION('',(-0.,-1.,0.)); +#59294 = FACE_BOUND('',#59295,.T.); +#59295 = EDGE_LOOP('',(#59296)); +#59296 = ORIENTED_EDGE('',*,*,#59297,.T.); +#59297 = EDGE_CURVE('',#59298,#59298,#59300,.T.); +#59298 = VERTEX_POINT('',#59299); +#59299 = CARTESIAN_POINT('',(176.5,-106.375,1.51)); +#59300 = CIRCLE('',#59301,0.475); +#59301 = AXIS2_PLACEMENT_3D('',#59302,#59303,#59304); +#59302 = CARTESIAN_POINT('',(176.5,-105.9,1.51)); +#59303 = DIRECTION('',(-0.,0.,-1.)); +#59304 = DIRECTION('',(-0.,-1.,0.)); +#59305 = FACE_BOUND('',#59306,.T.); +#59306 = EDGE_LOOP('',(#59307)); +#59307 = ORIENTED_EDGE('',*,*,#59308,.T.); +#59308 = EDGE_CURVE('',#59309,#59309,#59311,.T.); +#59309 = VERTEX_POINT('',#59310); +#59310 = CARTESIAN_POINT('',(176.5,-103.875,1.51)); +#59311 = CIRCLE('',#59312,0.475); +#59312 = AXIS2_PLACEMENT_3D('',#59313,#59314,#59315); +#59313 = CARTESIAN_POINT('',(176.5,-103.4,1.51)); +#59314 = DIRECTION('',(-0.,0.,-1.)); +#59315 = DIRECTION('',(-0.,-1.,0.)); +#59316 = PLANE('',#59317); +#59317 = AXIS2_PLACEMENT_3D('',#59318,#59319,#59320); +#59318 = CARTESIAN_POINT('',(0.,0.,1.51)); +#59319 = DIRECTION('',(0.,0.,1.)); +#59320 = DIRECTION('',(1.,0.,-0.)); +#59321 = ADVANCED_FACE('',(#59322),#59328,.T.); +#59322 = FACE_BOUND('',#59323,.T.); +#59323 = EDGE_LOOP('',(#59324,#59325,#59326,#59327)); +#59324 = ORIENTED_EDGE('',*,*,#57307,.T.); +#59325 = ORIENTED_EDGE('',*,*,#58329,.T.); +#59326 = ORIENTED_EDGE('',*,*,#57267,.F.); +#59327 = ORIENTED_EDGE('',*,*,#57331,.F.); +#59328 = PLANE('',#59329); +#59329 = AXIS2_PLACEMENT_3D('',#59330,#59331,#59332); +#59330 = CARTESIAN_POINT('',(100.,-100.,0.)); +#59331 = DIRECTION('',(0.,1.,0.)); +#59332 = DIRECTION('',(1.,0.,0.)); +#59333 = ADVANCED_FACE('',(#59334),#59345,.F.); +#59334 = FACE_BOUND('',#59335,.T.); +#59335 = EDGE_LOOP('',(#59336,#59337,#59343,#59344)); +#59336 = ORIENTED_EDGE('',*,*,#57340,.T.); +#59337 = ORIENTED_EDGE('',*,*,#59338,.T.); +#59338 = EDGE_CURVE('',#57341,#58339,#59339,.T.); +#59339 = LINE('',#59340,#59341); +#59340 = CARTESIAN_POINT('',(113.97,-157.4,-4.6E-02)); +#59341 = VECTOR('',#59342,1.); +#59342 = DIRECTION('',(0.,0.,1.)); +#59343 = ORIENTED_EDGE('',*,*,#58338,.F.); +#59344 = ORIENTED_EDGE('',*,*,#59338,.F.); +#59345 = CYLINDRICAL_SURFACE('',#59346,1.6); +#59346 = AXIS2_PLACEMENT_3D('',#59347,#59348,#59349); +#59347 = CARTESIAN_POINT('',(113.97,-155.8,-4.6E-02)); +#59348 = DIRECTION('',(-0.,-0.,-1.)); +#59349 = DIRECTION('',(-0.,-1.,0.)); +#59350 = ADVANCED_FACE('',(#59351),#59367,.F.); +#59351 = FACE_BOUND('',#59352,.T.); +#59352 = EDGE_LOOP('',(#59353,#59354,#59360,#59361)); +#59353 = ORIENTED_EDGE('',*,*,#57351,.T.); +#59354 = ORIENTED_EDGE('',*,*,#59355,.T.); +#59355 = EDGE_CURVE('',#57354,#58352,#59356,.T.); +#59356 = LINE('',#59357,#59358); +#59357 = CARTESIAN_POINT('',(102.05,-148.02,-4.6E-02)); +#59358 = VECTOR('',#59359,1.); +#59359 = DIRECTION('',(0.,0.,1.)); +#59360 = ORIENTED_EDGE('',*,*,#58349,.F.); +#59361 = ORIENTED_EDGE('',*,*,#59362,.F.); +#59362 = EDGE_CURVE('',#57352,#58350,#59363,.T.); +#59363 = LINE('',#59364,#59365); +#59364 = CARTESIAN_POINT('',(102.05,-148.62,-4.6E-02)); +#59365 = VECTOR('',#59366,1.); +#59366 = DIRECTION('',(0.,0.,1.)); +#59367 = CYLINDRICAL_SURFACE('',#59368,0.3); +#59368 = AXIS2_PLACEMENT_3D('',#59369,#59370,#59371); +#59369 = CARTESIAN_POINT('',(102.05,-148.32,-4.6E-02)); +#59370 = DIRECTION('',(-0.,0.,-1.)); +#59371 = DIRECTION('',(0.,1.,0.)); +#59372 = ADVANCED_FACE('',(#59373),#59384,.T.); +#59373 = FACE_BOUND('',#59374,.T.); +#59374 = EDGE_LOOP('',(#59375,#59376,#59377,#59378)); +#59375 = ORIENTED_EDGE('',*,*,#57379,.T.); +#59376 = ORIENTED_EDGE('',*,*,#59362,.T.); +#59377 = ORIENTED_EDGE('',*,*,#58377,.F.); +#59378 = ORIENTED_EDGE('',*,*,#59379,.F.); +#59379 = EDGE_CURVE('',#57371,#58369,#59380,.T.); +#59380 = LINE('',#59381,#59382); +#59381 = CARTESIAN_POINT('',(102.65,-148.62,-4.6E-02)); +#59382 = VECTOR('',#59383,1.); +#59383 = DIRECTION('',(0.,0.,1.)); +#59384 = PLANE('',#59385); +#59385 = AXIS2_PLACEMENT_3D('',#59386,#59387,#59388); +#59386 = CARTESIAN_POINT('',(102.05,-148.62,-4.6E-02)); +#59387 = DIRECTION('',(0.,1.,0.)); +#59388 = DIRECTION('',(1.,0.,0.)); +#59389 = ADVANCED_FACE('',(#59390),#59401,.F.); +#59390 = FACE_BOUND('',#59391,.T.); +#59391 = EDGE_LOOP('',(#59392,#59393,#59394,#59395)); +#59392 = ORIENTED_EDGE('',*,*,#57370,.T.); +#59393 = ORIENTED_EDGE('',*,*,#59379,.T.); +#59394 = ORIENTED_EDGE('',*,*,#58368,.F.); +#59395 = ORIENTED_EDGE('',*,*,#59396,.F.); +#59396 = EDGE_CURVE('',#57363,#58361,#59397,.T.); +#59397 = LINE('',#59398,#59399); +#59398 = CARTESIAN_POINT('',(102.65,-148.02,-4.6E-02)); +#59399 = VECTOR('',#59400,1.); +#59400 = DIRECTION('',(0.,0.,1.)); +#59401 = CYLINDRICAL_SURFACE('',#59402,0.3); +#59402 = AXIS2_PLACEMENT_3D('',#59403,#59404,#59405); +#59403 = CARTESIAN_POINT('',(102.65,-148.32,-4.6E-02)); +#59404 = DIRECTION('',(-0.,-0.,-1.)); +#59405 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#59406 = ADVANCED_FACE('',(#59407),#59413,.T.); +#59407 = FACE_BOUND('',#59408,.T.); +#59408 = EDGE_LOOP('',(#59409,#59410,#59411,#59412)); +#59409 = ORIENTED_EDGE('',*,*,#57362,.T.); +#59410 = ORIENTED_EDGE('',*,*,#59396,.T.); +#59411 = ORIENTED_EDGE('',*,*,#58360,.F.); +#59412 = ORIENTED_EDGE('',*,*,#59355,.F.); +#59413 = PLANE('',#59414); +#59414 = AXIS2_PLACEMENT_3D('',#59415,#59416,#59417); +#59415 = CARTESIAN_POINT('',(102.65,-148.02,-4.6E-02)); +#59416 = DIRECTION('',(0.,-1.,0.)); +#59417 = DIRECTION('',(-1.,0.,0.)); +#59418 = ADVANCED_FACE('',(#59419),#59430,.F.); +#59419 = FACE_BOUND('',#59420,.T.); +#59420 = EDGE_LOOP('',(#59421,#59422,#59428,#59429)); +#59421 = ORIENTED_EDGE('',*,*,#57387,.T.); +#59422 = ORIENTED_EDGE('',*,*,#59423,.T.); +#59423 = EDGE_CURVE('',#57388,#58386,#59424,.T.); +#59424 = LINE('',#59425,#59426); +#59425 = CARTESIAN_POINT('',(106.,-147.215,-4.6E-02)); +#59426 = VECTOR('',#59427,1.); +#59427 = DIRECTION('',(0.,0.,1.)); +#59428 = ORIENTED_EDGE('',*,*,#58385,.F.); +#59429 = ORIENTED_EDGE('',*,*,#59423,.F.); +#59430 = CYLINDRICAL_SURFACE('',#59431,0.325); +#59431 = AXIS2_PLACEMENT_3D('',#59432,#59433,#59434); +#59432 = CARTESIAN_POINT('',(106.,-146.89,-4.6E-02)); +#59433 = DIRECTION('',(-0.,-0.,-1.)); +#59434 = DIRECTION('',(-0.,-1.,0.)); +#59435 = ADVANCED_FACE('',(#59436),#59452,.F.); +#59436 = FACE_BOUND('',#59437,.T.); +#59437 = EDGE_LOOP('',(#59438,#59439,#59445,#59446)); +#59438 = ORIENTED_EDGE('',*,*,#57398,.T.); +#59439 = ORIENTED_EDGE('',*,*,#59440,.T.); +#59440 = EDGE_CURVE('',#57401,#58399,#59441,.T.); +#59441 = LINE('',#59442,#59443); +#59442 = CARTESIAN_POINT('',(105.98,-148.02,-4.6E-02)); +#59443 = VECTOR('',#59444,1.); +#59444 = DIRECTION('',(0.,0.,1.)); +#59445 = ORIENTED_EDGE('',*,*,#58396,.F.); +#59446 = ORIENTED_EDGE('',*,*,#59447,.F.); +#59447 = EDGE_CURVE('',#57399,#58397,#59448,.T.); +#59448 = LINE('',#59449,#59450); +#59449 = CARTESIAN_POINT('',(105.98,-148.62,-4.6E-02)); +#59450 = VECTOR('',#59451,1.); +#59451 = DIRECTION('',(0.,0.,1.)); +#59452 = CYLINDRICAL_SURFACE('',#59453,0.3); +#59453 = AXIS2_PLACEMENT_3D('',#59454,#59455,#59456); +#59454 = CARTESIAN_POINT('',(105.98,-148.32,-4.6E-02)); +#59455 = DIRECTION('',(-0.,0.,-1.)); +#59456 = DIRECTION('',(0.,1.,0.)); +#59457 = ADVANCED_FACE('',(#59458),#59469,.T.); +#59458 = FACE_BOUND('',#59459,.T.); +#59459 = EDGE_LOOP('',(#59460,#59461,#59462,#59463)); +#59460 = ORIENTED_EDGE('',*,*,#57426,.T.); +#59461 = ORIENTED_EDGE('',*,*,#59447,.T.); +#59462 = ORIENTED_EDGE('',*,*,#58424,.F.); +#59463 = ORIENTED_EDGE('',*,*,#59464,.F.); +#59464 = EDGE_CURVE('',#57418,#58416,#59465,.T.); +#59465 = LINE('',#59466,#59467); +#59466 = CARTESIAN_POINT('',(107.08,-148.62,-4.6E-02)); +#59467 = VECTOR('',#59468,1.); +#59468 = DIRECTION('',(0.,0.,1.)); +#59469 = PLANE('',#59470); +#59470 = AXIS2_PLACEMENT_3D('',#59471,#59472,#59473); +#59471 = CARTESIAN_POINT('',(105.98,-148.62,-4.6E-02)); +#59472 = DIRECTION('',(0.,1.,0.)); +#59473 = DIRECTION('',(1.,0.,0.)); +#59474 = ADVANCED_FACE('',(#59475),#59486,.F.); +#59475 = FACE_BOUND('',#59476,.T.); +#59476 = EDGE_LOOP('',(#59477,#59478,#59479,#59480)); +#59477 = ORIENTED_EDGE('',*,*,#57417,.T.); +#59478 = ORIENTED_EDGE('',*,*,#59464,.T.); +#59479 = ORIENTED_EDGE('',*,*,#58415,.F.); +#59480 = ORIENTED_EDGE('',*,*,#59481,.F.); +#59481 = EDGE_CURVE('',#57410,#58408,#59482,.T.); +#59482 = LINE('',#59483,#59484); +#59483 = CARTESIAN_POINT('',(107.08,-148.02,-4.6E-02)); +#59484 = VECTOR('',#59485,1.); +#59485 = DIRECTION('',(0.,0.,1.)); +#59486 = CYLINDRICAL_SURFACE('',#59487,0.3); +#59487 = AXIS2_PLACEMENT_3D('',#59488,#59489,#59490); +#59488 = CARTESIAN_POINT('',(107.08,-148.32,-4.6E-02)); +#59489 = DIRECTION('',(-0.,-0.,-1.)); +#59490 = DIRECTION('',(-0.,-1.,0.)); +#59491 = ADVANCED_FACE('',(#59492),#59498,.T.); +#59492 = FACE_BOUND('',#59493,.T.); +#59493 = EDGE_LOOP('',(#59494,#59495,#59496,#59497)); +#59494 = ORIENTED_EDGE('',*,*,#57409,.T.); +#59495 = ORIENTED_EDGE('',*,*,#59481,.T.); +#59496 = ORIENTED_EDGE('',*,*,#58407,.F.); +#59497 = ORIENTED_EDGE('',*,*,#59440,.F.); +#59498 = PLANE('',#59499); +#59499 = AXIS2_PLACEMENT_3D('',#59500,#59501,#59502); +#59500 = CARTESIAN_POINT('',(107.08,-148.02,-4.6E-02)); +#59501 = DIRECTION('',(0.,-1.,0.)); +#59502 = DIRECTION('',(-1.,0.,0.)); +#59503 = ADVANCED_FACE('',(#59504),#59515,.F.); +#59504 = FACE_BOUND('',#59505,.T.); +#59505 = EDGE_LOOP('',(#59506,#59507,#59513,#59514)); +#59506 = ORIENTED_EDGE('',*,*,#57434,.T.); +#59507 = ORIENTED_EDGE('',*,*,#59508,.T.); +#59508 = EDGE_CURVE('',#57435,#58433,#59509,.T.); +#59509 = LINE('',#59510,#59511); +#59510 = CARTESIAN_POINT('',(106.,-141.435,-4.6E-02)); +#59511 = VECTOR('',#59512,1.); +#59512 = DIRECTION('',(0.,0.,1.)); +#59513 = ORIENTED_EDGE('',*,*,#58432,.F.); +#59514 = ORIENTED_EDGE('',*,*,#59508,.F.); +#59515 = CYLINDRICAL_SURFACE('',#59516,0.325); +#59516 = AXIS2_PLACEMENT_3D('',#59517,#59518,#59519); +#59517 = CARTESIAN_POINT('',(106.,-141.11,-4.6E-02)); +#59518 = DIRECTION('',(-0.,-0.,-1.)); +#59519 = DIRECTION('',(-0.,-1.,0.)); +#59520 = ADVANCED_FACE('',(#59521),#59537,.F.); +#59521 = FACE_BOUND('',#59522,.T.); +#59522 = EDGE_LOOP('',(#59523,#59524,#59530,#59531)); +#59523 = ORIENTED_EDGE('',*,*,#57445,.T.); +#59524 = ORIENTED_EDGE('',*,*,#59525,.T.); +#59525 = EDGE_CURVE('',#57448,#58446,#59526,.T.); +#59526 = LINE('',#59527,#59528); +#59527 = CARTESIAN_POINT('',(102.05,-139.38,-4.6E-02)); +#59528 = VECTOR('',#59529,1.); +#59529 = DIRECTION('',(0.,0.,1.)); +#59530 = ORIENTED_EDGE('',*,*,#58443,.F.); +#59531 = ORIENTED_EDGE('',*,*,#59532,.F.); +#59532 = EDGE_CURVE('',#57446,#58444,#59533,.T.); +#59533 = LINE('',#59534,#59535); +#59534 = CARTESIAN_POINT('',(102.05,-139.98,-4.6E-02)); +#59535 = VECTOR('',#59536,1.); +#59536 = DIRECTION('',(0.,0.,1.)); +#59537 = CYLINDRICAL_SURFACE('',#59538,0.3); +#59538 = AXIS2_PLACEMENT_3D('',#59539,#59540,#59541); +#59539 = CARTESIAN_POINT('',(102.05,-139.68,-4.6E-02)); +#59540 = DIRECTION('',(-0.,0.,-1.)); +#59541 = DIRECTION('',(0.,1.,0.)); +#59542 = ADVANCED_FACE('',(#59543),#59554,.T.); +#59543 = FACE_BOUND('',#59544,.T.); +#59544 = EDGE_LOOP('',(#59545,#59546,#59547,#59548)); +#59545 = ORIENTED_EDGE('',*,*,#57473,.T.); +#59546 = ORIENTED_EDGE('',*,*,#59532,.T.); +#59547 = ORIENTED_EDGE('',*,*,#58471,.F.); +#59548 = ORIENTED_EDGE('',*,*,#59549,.F.); +#59549 = EDGE_CURVE('',#57465,#58463,#59550,.T.); +#59550 = LINE('',#59551,#59552); +#59551 = CARTESIAN_POINT('',(102.65,-139.98,-4.6E-02)); +#59552 = VECTOR('',#59553,1.); +#59553 = DIRECTION('',(0.,0.,1.)); +#59554 = PLANE('',#59555); +#59555 = AXIS2_PLACEMENT_3D('',#59556,#59557,#59558); +#59556 = CARTESIAN_POINT('',(102.05,-139.98,-4.6E-02)); +#59557 = DIRECTION('',(0.,1.,0.)); +#59558 = DIRECTION('',(1.,0.,0.)); +#59559 = ADVANCED_FACE('',(#59560),#59571,.F.); +#59560 = FACE_BOUND('',#59561,.T.); +#59561 = EDGE_LOOP('',(#59562,#59563,#59564,#59565)); +#59562 = ORIENTED_EDGE('',*,*,#57464,.T.); +#59563 = ORIENTED_EDGE('',*,*,#59549,.T.); +#59564 = ORIENTED_EDGE('',*,*,#58462,.F.); +#59565 = ORIENTED_EDGE('',*,*,#59566,.F.); +#59566 = EDGE_CURVE('',#57457,#58455,#59567,.T.); +#59567 = LINE('',#59568,#59569); +#59568 = CARTESIAN_POINT('',(102.65,-139.38,-4.6E-02)); +#59569 = VECTOR('',#59570,1.); +#59570 = DIRECTION('',(0.,0.,1.)); +#59571 = CYLINDRICAL_SURFACE('',#59572,0.3); +#59572 = AXIS2_PLACEMENT_3D('',#59573,#59574,#59575); +#59573 = CARTESIAN_POINT('',(102.65,-139.68,-4.6E-02)); +#59574 = DIRECTION('',(-0.,-0.,-1.)); +#59575 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#59576 = ADVANCED_FACE('',(#59577),#59583,.T.); +#59577 = FACE_BOUND('',#59578,.T.); +#59578 = EDGE_LOOP('',(#59579,#59580,#59581,#59582)); +#59579 = ORIENTED_EDGE('',*,*,#57456,.T.); +#59580 = ORIENTED_EDGE('',*,*,#59566,.T.); +#59581 = ORIENTED_EDGE('',*,*,#58454,.F.); +#59582 = ORIENTED_EDGE('',*,*,#59525,.F.); +#59583 = PLANE('',#59584); +#59584 = AXIS2_PLACEMENT_3D('',#59585,#59586,#59587); +#59585 = CARTESIAN_POINT('',(102.65,-139.38,-4.6E-02)); +#59586 = DIRECTION('',(0.,-1.,0.)); +#59587 = DIRECTION('',(-1.,0.,0.)); +#59588 = ADVANCED_FACE('',(#59589),#59605,.F.); +#59589 = FACE_BOUND('',#59590,.T.); +#59590 = EDGE_LOOP('',(#59591,#59592,#59598,#59599)); +#59591 = ORIENTED_EDGE('',*,*,#57481,.T.); +#59592 = ORIENTED_EDGE('',*,*,#59593,.T.); +#59593 = EDGE_CURVE('',#57484,#58482,#59594,.T.); +#59594 = LINE('',#59595,#59596); +#59595 = CARTESIAN_POINT('',(105.98,-139.38,-4.6E-02)); +#59596 = VECTOR('',#59597,1.); +#59597 = DIRECTION('',(0.,0.,1.)); +#59598 = ORIENTED_EDGE('',*,*,#58479,.F.); +#59599 = ORIENTED_EDGE('',*,*,#59600,.F.); +#59600 = EDGE_CURVE('',#57482,#58480,#59601,.T.); +#59601 = LINE('',#59602,#59603); +#59602 = CARTESIAN_POINT('',(105.98,-139.98,-4.6E-02)); +#59603 = VECTOR('',#59604,1.); +#59604 = DIRECTION('',(0.,0.,1.)); +#59605 = CYLINDRICAL_SURFACE('',#59606,0.3); +#59606 = AXIS2_PLACEMENT_3D('',#59607,#59608,#59609); +#59607 = CARTESIAN_POINT('',(105.98,-139.68,-4.6E-02)); +#59608 = DIRECTION('',(-0.,0.,-1.)); +#59609 = DIRECTION('',(0.,1.,0.)); +#59610 = ADVANCED_FACE('',(#59611),#59622,.T.); +#59611 = FACE_BOUND('',#59612,.T.); +#59612 = EDGE_LOOP('',(#59613,#59614,#59615,#59616)); +#59613 = ORIENTED_EDGE('',*,*,#57509,.T.); +#59614 = ORIENTED_EDGE('',*,*,#59600,.T.); +#59615 = ORIENTED_EDGE('',*,*,#58507,.F.); +#59616 = ORIENTED_EDGE('',*,*,#59617,.F.); +#59617 = EDGE_CURVE('',#57501,#58499,#59618,.T.); +#59618 = LINE('',#59619,#59620); +#59619 = CARTESIAN_POINT('',(107.08,-139.98,-4.6E-02)); +#59620 = VECTOR('',#59621,1.); +#59621 = DIRECTION('',(0.,0.,1.)); +#59622 = PLANE('',#59623); +#59623 = AXIS2_PLACEMENT_3D('',#59624,#59625,#59626); +#59624 = CARTESIAN_POINT('',(105.98,-139.98,-4.6E-02)); +#59625 = DIRECTION('',(0.,1.,0.)); +#59626 = DIRECTION('',(1.,0.,0.)); +#59627 = ADVANCED_FACE('',(#59628),#59639,.F.); +#59628 = FACE_BOUND('',#59629,.T.); +#59629 = EDGE_LOOP('',(#59630,#59631,#59632,#59633)); +#59630 = ORIENTED_EDGE('',*,*,#57500,.T.); +#59631 = ORIENTED_EDGE('',*,*,#59617,.T.); +#59632 = ORIENTED_EDGE('',*,*,#58498,.F.); +#59633 = ORIENTED_EDGE('',*,*,#59634,.F.); +#59634 = EDGE_CURVE('',#57493,#58491,#59635,.T.); +#59635 = LINE('',#59636,#59637); +#59636 = CARTESIAN_POINT('',(107.08,-139.38,-4.6E-02)); +#59637 = VECTOR('',#59638,1.); +#59638 = DIRECTION('',(0.,0.,1.)); +#59639 = CYLINDRICAL_SURFACE('',#59640,0.3); +#59640 = AXIS2_PLACEMENT_3D('',#59641,#59642,#59643); +#59641 = CARTESIAN_POINT('',(107.08,-139.68,-4.6E-02)); +#59642 = DIRECTION('',(-0.,-0.,-1.)); +#59643 = DIRECTION('',(-0.,-1.,0.)); +#59644 = ADVANCED_FACE('',(#59645),#59651,.T.); +#59645 = FACE_BOUND('',#59646,.T.); +#59646 = EDGE_LOOP('',(#59647,#59648,#59649,#59650)); +#59647 = ORIENTED_EDGE('',*,*,#57492,.T.); +#59648 = ORIENTED_EDGE('',*,*,#59634,.T.); +#59649 = ORIENTED_EDGE('',*,*,#58490,.F.); +#59650 = ORIENTED_EDGE('',*,*,#59593,.F.); +#59651 = PLANE('',#59652); +#59652 = AXIS2_PLACEMENT_3D('',#59653,#59654,#59655); +#59653 = CARTESIAN_POINT('',(107.08,-139.38,-4.6E-02)); +#59654 = DIRECTION('',(0.,-1.,0.)); +#59655 = DIRECTION('',(-1.,0.,0.)); +#59656 = ADVANCED_FACE('',(#59657),#59668,.F.); +#59657 = FACE_BOUND('',#59658,.T.); +#59658 = EDGE_LOOP('',(#59659,#59660,#59666,#59667)); +#59659 = ORIENTED_EDGE('',*,*,#57517,.T.); +#59660 = ORIENTED_EDGE('',*,*,#59661,.T.); +#59661 = EDGE_CURVE('',#57518,#58516,#59662,.T.); +#59662 = LINE('',#59663,#59664); +#59663 = CARTESIAN_POINT('',(118.,-135.5,-4.6E-02)); +#59664 = VECTOR('',#59665,1.); +#59665 = DIRECTION('',(0.,0.,1.)); +#59666 = ORIENTED_EDGE('',*,*,#58515,.F.); +#59667 = ORIENTED_EDGE('',*,*,#59661,.F.); +#59668 = CYLINDRICAL_SURFACE('',#59669,0.5); +#59669 = AXIS2_PLACEMENT_3D('',#59670,#59671,#59672); +#59670 = CARTESIAN_POINT('',(118.,-135.,-4.6E-02)); +#59671 = DIRECTION('',(-0.,-0.,-1.)); +#59672 = DIRECTION('',(-0.,-1.,0.)); +#59673 = ADVANCED_FACE('',(#59674),#59685,.F.); +#59674 = FACE_BOUND('',#59675,.T.); +#59675 = EDGE_LOOP('',(#59676,#59677,#59683,#59684)); +#59676 = ORIENTED_EDGE('',*,*,#57528,.T.); +#59677 = ORIENTED_EDGE('',*,*,#59678,.T.); +#59678 = EDGE_CURVE('',#57529,#58527,#59679,.T.); +#59679 = LINE('',#59680,#59681); +#59680 = CARTESIAN_POINT('',(120.54,-135.5,-4.6E-02)); +#59681 = VECTOR('',#59682,1.); +#59682 = DIRECTION('',(0.,0.,1.)); +#59683 = ORIENTED_EDGE('',*,*,#58526,.F.); +#59684 = ORIENTED_EDGE('',*,*,#59678,.F.); +#59685 = CYLINDRICAL_SURFACE('',#59686,0.5); +#59686 = AXIS2_PLACEMENT_3D('',#59687,#59688,#59689); +#59687 = CARTESIAN_POINT('',(120.54,-135.,-4.6E-02)); +#59688 = DIRECTION('',(-0.,-0.,-1.)); +#59689 = DIRECTION('',(-0.,-1.,0.)); +#59690 = ADVANCED_FACE('',(#59691),#59702,.F.); +#59691 = FACE_BOUND('',#59692,.T.); +#59692 = EDGE_LOOP('',(#59693,#59694,#59700,#59701)); +#59693 = ORIENTED_EDGE('',*,*,#57539,.T.); +#59694 = ORIENTED_EDGE('',*,*,#59695,.T.); +#59695 = EDGE_CURVE('',#57540,#58538,#59696,.T.); +#59696 = LINE('',#59697,#59698); +#59697 = CARTESIAN_POINT('',(123.08,-135.5,-4.6E-02)); +#59698 = VECTOR('',#59699,1.); +#59699 = DIRECTION('',(0.,0.,1.)); +#59700 = ORIENTED_EDGE('',*,*,#58537,.F.); +#59701 = ORIENTED_EDGE('',*,*,#59695,.F.); +#59702 = CYLINDRICAL_SURFACE('',#59703,0.5); +#59703 = AXIS2_PLACEMENT_3D('',#59704,#59705,#59706); +#59704 = CARTESIAN_POINT('',(123.08,-135.,-4.6E-02)); +#59705 = DIRECTION('',(-0.,-0.,-1.)); +#59706 = DIRECTION('',(-0.,-1.,0.)); +#59707 = ADVANCED_FACE('',(#59708),#59719,.F.); +#59708 = FACE_BOUND('',#59709,.T.); +#59709 = EDGE_LOOP('',(#59710,#59711,#59717,#59718)); +#59710 = ORIENTED_EDGE('',*,*,#57550,.T.); +#59711 = ORIENTED_EDGE('',*,*,#59712,.T.); +#59712 = EDGE_CURVE('',#57551,#58549,#59713,.T.); +#59713 = LINE('',#59714,#59715); +#59714 = CARTESIAN_POINT('',(177.5,-160.12,-4.6E-02)); +#59715 = VECTOR('',#59716,1.); +#59716 = DIRECTION('',(0.,0.,1.)); +#59717 = ORIENTED_EDGE('',*,*,#58548,.F.); +#59718 = ORIENTED_EDGE('',*,*,#59712,.F.); +#59719 = CYLINDRICAL_SURFACE('',#59720,0.5); +#59720 = AXIS2_PLACEMENT_3D('',#59721,#59722,#59723); +#59721 = CARTESIAN_POINT('',(177.5,-159.62,-4.6E-02)); +#59722 = DIRECTION('',(-0.,-0.,-1.)); +#59723 = DIRECTION('',(-0.,-1.,0.)); +#59724 = ADVANCED_FACE('',(#59725),#59736,.F.); +#59725 = FACE_BOUND('',#59726,.T.); +#59726 = EDGE_LOOP('',(#59727,#59728,#59734,#59735)); +#59727 = ORIENTED_EDGE('',*,*,#57561,.T.); +#59728 = ORIENTED_EDGE('',*,*,#59729,.T.); +#59729 = EDGE_CURVE('',#57562,#58560,#59730,.T.); +#59730 = LINE('',#59731,#59732); +#59731 = CARTESIAN_POINT('',(177.5,-157.58,-4.6E-02)); +#59732 = VECTOR('',#59733,1.); +#59733 = DIRECTION('',(0.,0.,1.)); +#59734 = ORIENTED_EDGE('',*,*,#58559,.F.); +#59735 = ORIENTED_EDGE('',*,*,#59729,.F.); +#59736 = CYLINDRICAL_SURFACE('',#59737,0.5); +#59737 = AXIS2_PLACEMENT_3D('',#59738,#59739,#59740); +#59738 = CARTESIAN_POINT('',(177.5,-157.08,-4.6E-02)); +#59739 = DIRECTION('',(-0.,-0.,-1.)); +#59740 = DIRECTION('',(-0.,-1.,0.)); +#59741 = ADVANCED_FACE('',(#59742),#59753,.F.); +#59742 = FACE_BOUND('',#59743,.T.); +#59743 = EDGE_LOOP('',(#59744,#59745,#59751,#59752)); +#59744 = ORIENTED_EDGE('',*,*,#57572,.T.); +#59745 = ORIENTED_EDGE('',*,*,#59746,.T.); +#59746 = EDGE_CURVE('',#57573,#58571,#59747,.T.); +#59747 = LINE('',#59748,#59749); +#59748 = CARTESIAN_POINT('',(177.5,-155.04,-4.6E-02)); +#59749 = VECTOR('',#59750,1.); +#59750 = DIRECTION('',(0.,0.,1.)); +#59751 = ORIENTED_EDGE('',*,*,#58570,.F.); +#59752 = ORIENTED_EDGE('',*,*,#59746,.F.); +#59753 = CYLINDRICAL_SURFACE('',#59754,0.5); +#59754 = AXIS2_PLACEMENT_3D('',#59755,#59756,#59757); +#59755 = CARTESIAN_POINT('',(177.5,-154.54,-4.6E-02)); +#59756 = DIRECTION('',(-0.,-0.,-1.)); +#59757 = DIRECTION('',(-0.,-1.,0.)); +#59758 = ADVANCED_FACE('',(#59759),#59770,.F.); +#59759 = FACE_BOUND('',#59760,.T.); +#59760 = EDGE_LOOP('',(#59761,#59762,#59768,#59769)); +#59761 = ORIENTED_EDGE('',*,*,#57583,.T.); +#59762 = ORIENTED_EDGE('',*,*,#59763,.T.); +#59763 = EDGE_CURVE('',#57584,#58582,#59764,.T.); +#59764 = LINE('',#59765,#59766); +#59765 = CARTESIAN_POINT('',(166.04,-152.32,-4.6E-02)); +#59766 = VECTOR('',#59767,1.); +#59767 = DIRECTION('',(0.,0.,1.)); +#59768 = ORIENTED_EDGE('',*,*,#58581,.F.); +#59769 = ORIENTED_EDGE('',*,*,#59763,.F.); +#59770 = CYLINDRICAL_SURFACE('',#59771,1.6); +#59771 = AXIS2_PLACEMENT_3D('',#59772,#59773,#59774); +#59772 = CARTESIAN_POINT('',(166.04,-150.72,-4.6E-02)); +#59773 = DIRECTION('',(-0.,-0.,-1.)); +#59774 = DIRECTION('',(-0.,-1.,0.)); +#59775 = ADVANCED_FACE('',(#59776),#59787,.F.); +#59776 = FACE_BOUND('',#59777,.T.); +#59777 = EDGE_LOOP('',(#59778,#59779,#59785,#59786)); +#59778 = ORIENTED_EDGE('',*,*,#57594,.T.); +#59779 = ORIENTED_EDGE('',*,*,#59780,.T.); +#59780 = EDGE_CURVE('',#57595,#58593,#59781,.T.); +#59781 = LINE('',#59782,#59783); +#59782 = CARTESIAN_POINT('',(177.5,-152.5,-4.6E-02)); +#59783 = VECTOR('',#59784,1.); +#59784 = DIRECTION('',(0.,0.,1.)); +#59785 = ORIENTED_EDGE('',*,*,#58592,.F.); +#59786 = ORIENTED_EDGE('',*,*,#59780,.F.); +#59787 = CYLINDRICAL_SURFACE('',#59788,0.5); +#59788 = AXIS2_PLACEMENT_3D('',#59789,#59790,#59791); +#59789 = CARTESIAN_POINT('',(177.5,-152.,-4.6E-02)); +#59790 = DIRECTION('',(-0.,-0.,-1.)); +#59791 = DIRECTION('',(-0.,-1.,0.)); +#59792 = ADVANCED_FACE('',(#59793),#59804,.F.); +#59793 = FACE_BOUND('',#59794,.T.); +#59794 = EDGE_LOOP('',(#59795,#59796,#59802,#59803)); +#59795 = ORIENTED_EDGE('',*,*,#57605,.T.); +#59796 = ORIENTED_EDGE('',*,*,#59797,.T.); +#59797 = EDGE_CURVE('',#57606,#58604,#59798,.T.); +#59798 = LINE('',#59799,#59800); +#59799 = CARTESIAN_POINT('',(176.5,-146.175,-4.6E-02)); +#59800 = VECTOR('',#59801,1.); +#59801 = DIRECTION('',(0.,0.,1.)); +#59802 = ORIENTED_EDGE('',*,*,#58603,.F.); +#59803 = ORIENTED_EDGE('',*,*,#59797,.F.); +#59804 = CYLINDRICAL_SURFACE('',#59805,0.475); +#59805 = AXIS2_PLACEMENT_3D('',#59806,#59807,#59808); +#59806 = CARTESIAN_POINT('',(176.5,-145.7,-4.6E-02)); +#59807 = DIRECTION('',(-0.,-0.,-1.)); +#59808 = DIRECTION('',(-0.,-1.,0.)); +#59809 = ADVANCED_FACE('',(#59810),#59821,.F.); +#59810 = FACE_BOUND('',#59811,.T.); +#59811 = EDGE_LOOP('',(#59812,#59813,#59819,#59820)); +#59812 = ORIENTED_EDGE('',*,*,#57616,.T.); +#59813 = ORIENTED_EDGE('',*,*,#59814,.T.); +#59814 = EDGE_CURVE('',#57617,#58615,#59815,.T.); +#59815 = LINE('',#59816,#59817); +#59816 = CARTESIAN_POINT('',(176.5,-143.675,-4.6E-02)); +#59817 = VECTOR('',#59818,1.); +#59818 = DIRECTION('',(0.,0.,1.)); +#59819 = ORIENTED_EDGE('',*,*,#58614,.F.); +#59820 = ORIENTED_EDGE('',*,*,#59814,.F.); +#59821 = CYLINDRICAL_SURFACE('',#59822,0.475); +#59822 = AXIS2_PLACEMENT_3D('',#59823,#59824,#59825); +#59823 = CARTESIAN_POINT('',(176.5,-143.2,-4.6E-02)); +#59824 = DIRECTION('',(-0.,-0.,-1.)); +#59825 = DIRECTION('',(-0.,-1.,0.)); +#59826 = ADVANCED_FACE('',(#59827),#59838,.F.); +#59827 = FACE_BOUND('',#59828,.T.); +#59828 = EDGE_LOOP('',(#59829,#59830,#59836,#59837)); +#59829 = ORIENTED_EDGE('',*,*,#57627,.T.); +#59830 = ORIENTED_EDGE('',*,*,#59831,.T.); +#59831 = EDGE_CURVE('',#57628,#58626,#59832,.T.); +#59832 = LINE('',#59833,#59834); +#59833 = CARTESIAN_POINT('',(176.5,-141.175,-4.6E-02)); +#59834 = VECTOR('',#59835,1.); +#59835 = DIRECTION('',(0.,0.,1.)); +#59836 = ORIENTED_EDGE('',*,*,#58625,.F.); +#59837 = ORIENTED_EDGE('',*,*,#59831,.F.); +#59838 = CYLINDRICAL_SURFACE('',#59839,0.475); +#59839 = AXIS2_PLACEMENT_3D('',#59840,#59841,#59842); +#59840 = CARTESIAN_POINT('',(176.5,-140.7,-4.6E-02)); +#59841 = DIRECTION('',(-0.,-0.,-1.)); +#59842 = DIRECTION('',(-0.,-1.,0.)); +#59843 = ADVANCED_FACE('',(#59844),#59855,.F.); +#59844 = FACE_BOUND('',#59845,.T.); +#59845 = EDGE_LOOP('',(#59846,#59847,#59853,#59854)); +#59846 = ORIENTED_EDGE('',*,*,#57638,.T.); +#59847 = ORIENTED_EDGE('',*,*,#59848,.T.); +#59848 = EDGE_CURVE('',#57639,#58637,#59849,.T.); +#59849 = LINE('',#59850,#59851); +#59850 = CARTESIAN_POINT('',(176.5,-135.075,-4.6E-02)); +#59851 = VECTOR('',#59852,1.); +#59852 = DIRECTION('',(0.,0.,1.)); +#59853 = ORIENTED_EDGE('',*,*,#58636,.F.); +#59854 = ORIENTED_EDGE('',*,*,#59848,.F.); +#59855 = CYLINDRICAL_SURFACE('',#59856,0.475); +#59856 = AXIS2_PLACEMENT_3D('',#59857,#59858,#59859); +#59857 = CARTESIAN_POINT('',(176.5,-134.6,-4.6E-02)); +#59858 = DIRECTION('',(-0.,-0.,-1.)); +#59859 = DIRECTION('',(-0.,-1.,0.)); +#59860 = ADVANCED_FACE('',(#59861),#59872,.F.); +#59861 = FACE_BOUND('',#59862,.T.); +#59862 = EDGE_LOOP('',(#59863,#59864,#59870,#59871)); +#59863 = ORIENTED_EDGE('',*,*,#57649,.T.); +#59864 = ORIENTED_EDGE('',*,*,#59865,.T.); +#59865 = EDGE_CURVE('',#57650,#58648,#59866,.T.); +#59866 = LINE('',#59867,#59868); +#59867 = CARTESIAN_POINT('',(176.5,-132.575,-4.6E-02)); +#59868 = VECTOR('',#59869,1.); +#59869 = DIRECTION('',(0.,0.,1.)); +#59870 = ORIENTED_EDGE('',*,*,#58647,.F.); +#59871 = ORIENTED_EDGE('',*,*,#59865,.F.); +#59872 = CYLINDRICAL_SURFACE('',#59873,0.475); +#59873 = AXIS2_PLACEMENT_3D('',#59874,#59875,#59876); +#59874 = CARTESIAN_POINT('',(176.5,-132.1,-4.6E-02)); +#59875 = DIRECTION('',(-0.,-0.,-1.)); +#59876 = DIRECTION('',(-0.,-1.,0.)); +#59877 = ADVANCED_FACE('',(#59878),#59894,.F.); +#59878 = FACE_BOUND('',#59879,.T.); +#59879 = EDGE_LOOP('',(#59880,#59881,#59887,#59888)); +#59880 = ORIENTED_EDGE('',*,*,#57660,.T.); +#59881 = ORIENTED_EDGE('',*,*,#59882,.T.); +#59882 = EDGE_CURVE('',#57663,#58661,#59883,.T.); +#59883 = LINE('',#59884,#59885); +#59884 = CARTESIAN_POINT('',(104.55,-129.,-4.6E-02)); +#59885 = VECTOR('',#59886,1.); +#59886 = DIRECTION('',(0.,0.,1.)); +#59887 = ORIENTED_EDGE('',*,*,#58658,.F.); +#59888 = ORIENTED_EDGE('',*,*,#59889,.F.); +#59889 = EDGE_CURVE('',#57661,#58659,#59890,.T.); +#59890 = LINE('',#59891,#59892); +#59891 = CARTESIAN_POINT('',(104.55,-130.,-4.6E-02)); +#59892 = VECTOR('',#59893,1.); +#59893 = DIRECTION('',(0.,0.,1.)); +#59894 = CYLINDRICAL_SURFACE('',#59895,0.5); +#59895 = AXIS2_PLACEMENT_3D('',#59896,#59897,#59898); +#59896 = CARTESIAN_POINT('',(104.55,-129.5,-4.6E-02)); +#59897 = DIRECTION('',(-0.,0.,-1.)); +#59898 = DIRECTION('',(0.,1.,0.)); +#59899 = ADVANCED_FACE('',(#59900),#59911,.T.); +#59900 = FACE_BOUND('',#59901,.T.); +#59901 = EDGE_LOOP('',(#59902,#59903,#59904,#59905)); +#59902 = ORIENTED_EDGE('',*,*,#57688,.T.); +#59903 = ORIENTED_EDGE('',*,*,#59889,.T.); +#59904 = ORIENTED_EDGE('',*,*,#58686,.F.); +#59905 = ORIENTED_EDGE('',*,*,#59906,.F.); +#59906 = EDGE_CURVE('',#57680,#58678,#59907,.T.); +#59907 = LINE('',#59908,#59909); +#59908 = CARTESIAN_POINT('',(106.05,-130.,-4.6E-02)); +#59909 = VECTOR('',#59910,1.); +#59910 = DIRECTION('',(0.,0.,1.)); +#59911 = PLANE('',#59912); +#59912 = AXIS2_PLACEMENT_3D('',#59913,#59914,#59915); +#59913 = CARTESIAN_POINT('',(104.55,-130.,-4.6E-02)); +#59914 = DIRECTION('',(0.,1.,0.)); +#59915 = DIRECTION('',(1.,0.,0.)); +#59916 = ADVANCED_FACE('',(#59917),#59928,.F.); +#59917 = FACE_BOUND('',#59918,.T.); +#59918 = EDGE_LOOP('',(#59919,#59920,#59921,#59922)); +#59919 = ORIENTED_EDGE('',*,*,#57679,.T.); +#59920 = ORIENTED_EDGE('',*,*,#59906,.T.); +#59921 = ORIENTED_EDGE('',*,*,#58677,.F.); +#59922 = ORIENTED_EDGE('',*,*,#59923,.F.); +#59923 = EDGE_CURVE('',#57672,#58670,#59924,.T.); +#59924 = LINE('',#59925,#59926); +#59925 = CARTESIAN_POINT('',(106.05,-129.,-4.6E-02)); +#59926 = VECTOR('',#59927,1.); +#59927 = DIRECTION('',(0.,0.,1.)); +#59928 = CYLINDRICAL_SURFACE('',#59929,0.5); +#59929 = AXIS2_PLACEMENT_3D('',#59930,#59931,#59932); +#59930 = CARTESIAN_POINT('',(106.05,-129.5,-4.6E-02)); +#59931 = DIRECTION('',(-0.,-0.,-1.)); +#59932 = DIRECTION('',(-0.,-1.,0.)); +#59933 = ADVANCED_FACE('',(#59934),#59940,.T.); +#59934 = FACE_BOUND('',#59935,.T.); +#59935 = EDGE_LOOP('',(#59936,#59937,#59938,#59939)); +#59936 = ORIENTED_EDGE('',*,*,#57671,.T.); +#59937 = ORIENTED_EDGE('',*,*,#59923,.T.); +#59938 = ORIENTED_EDGE('',*,*,#58669,.F.); +#59939 = ORIENTED_EDGE('',*,*,#59882,.F.); +#59940 = PLANE('',#59941); +#59941 = AXIS2_PLACEMENT_3D('',#59942,#59943,#59944); +#59942 = CARTESIAN_POINT('',(106.05,-129.,-4.6E-02)); +#59943 = DIRECTION('',(0.,-1.,0.)); +#59944 = DIRECTION('',(-1.,0.,0.)); +#59945 = ADVANCED_FACE('',(#59946),#59957,.F.); +#59946 = FACE_BOUND('',#59947,.T.); +#59947 = EDGE_LOOP('',(#59948,#59949,#59955,#59956)); +#59948 = ORIENTED_EDGE('',*,*,#57696,.T.); +#59949 = ORIENTED_EDGE('',*,*,#59950,.T.); +#59950 = EDGE_CURVE('',#57697,#58695,#59951,.T.); +#59951 = LINE('',#59952,#59953); +#59952 = CARTESIAN_POINT('',(103.3,-125.8,-4.6E-02)); +#59953 = VECTOR('',#59954,1.); +#59954 = DIRECTION('',(0.,0.,1.)); +#59955 = ORIENTED_EDGE('',*,*,#58694,.F.); +#59956 = ORIENTED_EDGE('',*,*,#59950,.F.); +#59957 = CYLINDRICAL_SURFACE('',#59958,0.8); +#59958 = AXIS2_PLACEMENT_3D('',#59959,#59960,#59961); +#59959 = CARTESIAN_POINT('',(103.3,-125.,-4.6E-02)); +#59960 = DIRECTION('',(-0.,-0.,-1.)); +#59961 = DIRECTION('',(-0.,-1.,0.)); +#59962 = ADVANCED_FACE('',(#59963),#59979,.F.); +#59963 = FACE_BOUND('',#59964,.T.); +#59964 = EDGE_LOOP('',(#59965,#59966,#59972,#59973)); +#59965 = ORIENTED_EDGE('',*,*,#57707,.T.); +#59966 = ORIENTED_EDGE('',*,*,#59967,.T.); +#59967 = EDGE_CURVE('',#57710,#58708,#59968,.T.); +#59968 = LINE('',#59969,#59970); +#59969 = CARTESIAN_POINT('',(105.8,-125.65,-4.6E-02)); +#59970 = VECTOR('',#59971,1.); +#59971 = DIRECTION('',(0.,0.,1.)); +#59972 = ORIENTED_EDGE('',*,*,#58705,.F.); +#59973 = ORIENTED_EDGE('',*,*,#59974,.F.); +#59974 = EDGE_CURVE('',#57708,#58706,#59975,.T.); +#59975 = LINE('',#59976,#59977); +#59976 = CARTESIAN_POINT('',(106.8,-125.65,-4.6E-02)); +#59977 = VECTOR('',#59978,1.); +#59978 = DIRECTION('',(0.,0.,1.)); +#59979 = CYLINDRICAL_SURFACE('',#59980,0.5); +#59980 = AXIS2_PLACEMENT_3D('',#59981,#59982,#59983); +#59981 = CARTESIAN_POINT('',(106.3,-125.65,-4.6E-02)); +#59982 = DIRECTION('',(-0.,-0.,-1.)); +#59983 = DIRECTION('',(-1.,0.,-0.)); +#59984 = ADVANCED_FACE('',(#59985),#59996,.T.); +#59985 = FACE_BOUND('',#59986,.T.); +#59986 = EDGE_LOOP('',(#59987,#59988,#59989,#59990)); +#59987 = ORIENTED_EDGE('',*,*,#57735,.T.); +#59988 = ORIENTED_EDGE('',*,*,#59974,.T.); +#59989 = ORIENTED_EDGE('',*,*,#58733,.F.); +#59990 = ORIENTED_EDGE('',*,*,#59991,.F.); +#59991 = EDGE_CURVE('',#57727,#58725,#59992,.T.); +#59992 = LINE('',#59993,#59994); +#59993 = CARTESIAN_POINT('',(106.8,-124.35,-4.6E-02)); +#59994 = VECTOR('',#59995,1.); +#59995 = DIRECTION('',(0.,0.,1.)); +#59996 = PLANE('',#59997); +#59997 = AXIS2_PLACEMENT_3D('',#59998,#59999,#60000); +#59998 = CARTESIAN_POINT('',(106.8,-125.65,-4.6E-02)); +#59999 = DIRECTION('',(-1.,0.,0.)); +#60000 = DIRECTION('',(0.,1.,0.)); +#60001 = ADVANCED_FACE('',(#60002),#60013,.F.); +#60002 = FACE_BOUND('',#60003,.T.); +#60003 = EDGE_LOOP('',(#60004,#60005,#60006,#60007)); +#60004 = ORIENTED_EDGE('',*,*,#57726,.T.); +#60005 = ORIENTED_EDGE('',*,*,#59991,.T.); +#60006 = ORIENTED_EDGE('',*,*,#58724,.F.); +#60007 = ORIENTED_EDGE('',*,*,#60008,.F.); +#60008 = EDGE_CURVE('',#57719,#58717,#60009,.T.); +#60009 = LINE('',#60010,#60011); +#60010 = CARTESIAN_POINT('',(105.8,-124.35,-4.6E-02)); +#60011 = VECTOR('',#60012,1.); +#60012 = DIRECTION('',(0.,0.,1.)); +#60013 = CYLINDRICAL_SURFACE('',#60014,0.5); +#60014 = AXIS2_PLACEMENT_3D('',#60015,#60016,#60017); +#60015 = CARTESIAN_POINT('',(106.3,-124.35,-4.6E-02)); +#60016 = DIRECTION('',(-0.,-0.,-1.)); +#60017 = DIRECTION('',(1.,0.,-0.)); +#60018 = ADVANCED_FACE('',(#60019),#60025,.T.); +#60019 = FACE_BOUND('',#60020,.T.); +#60020 = EDGE_LOOP('',(#60021,#60022,#60023,#60024)); +#60021 = ORIENTED_EDGE('',*,*,#57718,.T.); +#60022 = ORIENTED_EDGE('',*,*,#60008,.T.); +#60023 = ORIENTED_EDGE('',*,*,#58716,.F.); +#60024 = ORIENTED_EDGE('',*,*,#59967,.F.); +#60025 = PLANE('',#60026); +#60026 = AXIS2_PLACEMENT_3D('',#60027,#60028,#60029); +#60027 = CARTESIAN_POINT('',(105.8,-124.35,-4.6E-02)); +#60028 = DIRECTION('',(1.,0.,-0.)); +#60029 = DIRECTION('',(0.,-1.,0.)); +#60030 = ADVANCED_FACE('',(#60031),#60047,.F.); +#60031 = FACE_BOUND('',#60032,.T.); +#60032 = EDGE_LOOP('',(#60033,#60034,#60040,#60041)); +#60033 = ORIENTED_EDGE('',*,*,#57743,.T.); +#60034 = ORIENTED_EDGE('',*,*,#60035,.T.); +#60035 = EDGE_CURVE('',#57746,#58744,#60036,.T.); +#60036 = LINE('',#60037,#60038); +#60037 = CARTESIAN_POINT('',(111.8,-126.,-4.6E-02)); +#60038 = VECTOR('',#60039,1.); +#60039 = DIRECTION('',(0.,0.,1.)); +#60040 = ORIENTED_EDGE('',*,*,#58741,.F.); +#60041 = ORIENTED_EDGE('',*,*,#60042,.F.); +#60042 = EDGE_CURVE('',#57744,#58742,#60043,.T.); +#60043 = LINE('',#60044,#60045); +#60044 = CARTESIAN_POINT('',(112.8,-126.,-4.6E-02)); +#60045 = VECTOR('',#60046,1.); +#60046 = DIRECTION('',(0.,0.,1.)); +#60047 = CYLINDRICAL_SURFACE('',#60048,0.5); +#60048 = AXIS2_PLACEMENT_3D('',#60049,#60050,#60051); +#60049 = CARTESIAN_POINT('',(112.3,-126.,-4.6E-02)); +#60050 = DIRECTION('',(-0.,-0.,-1.)); +#60051 = DIRECTION('',(-1.,0.,-0.)); +#60052 = ADVANCED_FACE('',(#60053),#60064,.T.); +#60053 = FACE_BOUND('',#60054,.T.); +#60054 = EDGE_LOOP('',(#60055,#60056,#60057,#60058)); +#60055 = ORIENTED_EDGE('',*,*,#57771,.T.); +#60056 = ORIENTED_EDGE('',*,*,#60042,.T.); +#60057 = ORIENTED_EDGE('',*,*,#58769,.F.); +#60058 = ORIENTED_EDGE('',*,*,#60059,.F.); +#60059 = EDGE_CURVE('',#57763,#58761,#60060,.T.); +#60060 = LINE('',#60061,#60062); +#60061 = CARTESIAN_POINT('',(112.8,-124.,-4.6E-02)); +#60062 = VECTOR('',#60063,1.); +#60063 = DIRECTION('',(0.,0.,1.)); +#60064 = PLANE('',#60065); +#60065 = AXIS2_PLACEMENT_3D('',#60066,#60067,#60068); +#60066 = CARTESIAN_POINT('',(112.8,-126.,-4.6E-02)); +#60067 = DIRECTION('',(-1.,0.,0.)); +#60068 = DIRECTION('',(0.,1.,0.)); +#60069 = ADVANCED_FACE('',(#60070),#60081,.F.); +#60070 = FACE_BOUND('',#60071,.T.); +#60071 = EDGE_LOOP('',(#60072,#60073,#60074,#60075)); +#60072 = ORIENTED_EDGE('',*,*,#57762,.T.); +#60073 = ORIENTED_EDGE('',*,*,#60059,.T.); +#60074 = ORIENTED_EDGE('',*,*,#58760,.F.); +#60075 = ORIENTED_EDGE('',*,*,#60076,.F.); +#60076 = EDGE_CURVE('',#57755,#58753,#60077,.T.); +#60077 = LINE('',#60078,#60079); +#60078 = CARTESIAN_POINT('',(111.8,-124.,-4.6E-02)); +#60079 = VECTOR('',#60080,1.); +#60080 = DIRECTION('',(0.,0.,1.)); +#60081 = CYLINDRICAL_SURFACE('',#60082,0.5); +#60082 = AXIS2_PLACEMENT_3D('',#60083,#60084,#60085); +#60083 = CARTESIAN_POINT('',(112.3,-124.,-4.6E-02)); +#60084 = DIRECTION('',(-0.,-0.,-1.)); +#60085 = DIRECTION('',(1.,0.,-0.)); +#60086 = ADVANCED_FACE('',(#60087),#60093,.T.); +#60087 = FACE_BOUND('',#60088,.T.); +#60088 = EDGE_LOOP('',(#60089,#60090,#60091,#60092)); +#60089 = ORIENTED_EDGE('',*,*,#57754,.T.); +#60090 = ORIENTED_EDGE('',*,*,#60076,.T.); +#60091 = ORIENTED_EDGE('',*,*,#58752,.F.); +#60092 = ORIENTED_EDGE('',*,*,#60035,.F.); +#60093 = PLANE('',#60094); +#60094 = AXIS2_PLACEMENT_3D('',#60095,#60096,#60097); +#60095 = CARTESIAN_POINT('',(111.8,-124.,-4.6E-02)); +#60096 = DIRECTION('',(1.,0.,-0.)); +#60097 = DIRECTION('',(0.,-1.,0.)); +#60098 = ADVANCED_FACE('',(#60099),#60115,.F.); +#60099 = FACE_BOUND('',#60100,.T.); +#60100 = EDGE_LOOP('',(#60101,#60102,#60108,#60109)); +#60101 = ORIENTED_EDGE('',*,*,#57779,.T.); +#60102 = ORIENTED_EDGE('',*,*,#60103,.T.); +#60103 = EDGE_CURVE('',#57782,#58780,#60104,.T.); +#60104 = LINE('',#60105,#60106); +#60105 = CARTESIAN_POINT('',(104.55,-120.,-4.6E-02)); +#60106 = VECTOR('',#60107,1.); +#60107 = DIRECTION('',(0.,0.,1.)); +#60108 = ORIENTED_EDGE('',*,*,#58777,.F.); +#60109 = ORIENTED_EDGE('',*,*,#60110,.F.); +#60110 = EDGE_CURVE('',#57780,#58778,#60111,.T.); +#60111 = LINE('',#60112,#60113); +#60112 = CARTESIAN_POINT('',(104.55,-121.,-4.6E-02)); +#60113 = VECTOR('',#60114,1.); +#60114 = DIRECTION('',(0.,0.,1.)); +#60115 = CYLINDRICAL_SURFACE('',#60116,0.5); +#60116 = AXIS2_PLACEMENT_3D('',#60117,#60118,#60119); +#60117 = CARTESIAN_POINT('',(104.55,-120.5,-4.6E-02)); +#60118 = DIRECTION('',(-0.,0.,-1.)); +#60119 = DIRECTION('',(0.,1.,0.)); +#60120 = ADVANCED_FACE('',(#60121),#60132,.T.); +#60121 = FACE_BOUND('',#60122,.T.); +#60122 = EDGE_LOOP('',(#60123,#60124,#60125,#60126)); +#60123 = ORIENTED_EDGE('',*,*,#57807,.T.); +#60124 = ORIENTED_EDGE('',*,*,#60110,.T.); +#60125 = ORIENTED_EDGE('',*,*,#58805,.F.); +#60126 = ORIENTED_EDGE('',*,*,#60127,.F.); +#60127 = EDGE_CURVE('',#57799,#58797,#60128,.T.); +#60128 = LINE('',#60129,#60130); +#60129 = CARTESIAN_POINT('',(106.05,-121.,-4.6E-02)); +#60130 = VECTOR('',#60131,1.); +#60131 = DIRECTION('',(0.,0.,1.)); +#60132 = PLANE('',#60133); +#60133 = AXIS2_PLACEMENT_3D('',#60134,#60135,#60136); +#60134 = CARTESIAN_POINT('',(104.55,-121.,-4.6E-02)); +#60135 = DIRECTION('',(0.,1.,0.)); +#60136 = DIRECTION('',(1.,0.,0.)); +#60137 = ADVANCED_FACE('',(#60138),#60149,.F.); +#60138 = FACE_BOUND('',#60139,.T.); +#60139 = EDGE_LOOP('',(#60140,#60141,#60142,#60143)); +#60140 = ORIENTED_EDGE('',*,*,#57798,.T.); +#60141 = ORIENTED_EDGE('',*,*,#60127,.T.); +#60142 = ORIENTED_EDGE('',*,*,#58796,.F.); +#60143 = ORIENTED_EDGE('',*,*,#60144,.F.); +#60144 = EDGE_CURVE('',#57791,#58789,#60145,.T.); +#60145 = LINE('',#60146,#60147); +#60146 = CARTESIAN_POINT('',(106.05,-120.,-4.6E-02)); +#60147 = VECTOR('',#60148,1.); +#60148 = DIRECTION('',(0.,0.,1.)); +#60149 = CYLINDRICAL_SURFACE('',#60150,0.5); +#60150 = AXIS2_PLACEMENT_3D('',#60151,#60152,#60153); +#60151 = CARTESIAN_POINT('',(106.05,-120.5,-4.6E-02)); +#60152 = DIRECTION('',(-0.,-0.,-1.)); +#60153 = DIRECTION('',(-0.,-1.,0.)); +#60154 = ADVANCED_FACE('',(#60155),#60161,.T.); +#60155 = FACE_BOUND('',#60156,.T.); +#60156 = EDGE_LOOP('',(#60157,#60158,#60159,#60160)); +#60157 = ORIENTED_EDGE('',*,*,#57790,.T.); +#60158 = ORIENTED_EDGE('',*,*,#60144,.T.); +#60159 = ORIENTED_EDGE('',*,*,#58788,.F.); +#60160 = ORIENTED_EDGE('',*,*,#60103,.F.); +#60161 = PLANE('',#60162); +#60162 = AXIS2_PLACEMENT_3D('',#60163,#60164,#60165); +#60163 = CARTESIAN_POINT('',(106.05,-120.,-4.6E-02)); +#60164 = DIRECTION('',(0.,-1.,0.)); +#60165 = DIRECTION('',(-1.,0.,0.)); +#60166 = ADVANCED_FACE('',(#60167),#60178,.F.); +#60167 = FACE_BOUND('',#60168,.T.); +#60168 = EDGE_LOOP('',(#60169,#60170,#60176,#60177)); +#60169 = ORIENTED_EDGE('',*,*,#57815,.T.); +#60170 = ORIENTED_EDGE('',*,*,#60171,.T.); +#60171 = EDGE_CURVE('',#57816,#58814,#60172,.T.); +#60172 = LINE('',#60173,#60174); +#60173 = CARTESIAN_POINT('',(104.5,-111.375,-4.6E-02)); +#60174 = VECTOR('',#60175,1.); +#60175 = DIRECTION('',(0.,0.,1.)); +#60176 = ORIENTED_EDGE('',*,*,#58813,.F.); +#60177 = ORIENTED_EDGE('',*,*,#60171,.F.); +#60178 = CYLINDRICAL_SURFACE('',#60179,0.475); +#60179 = AXIS2_PLACEMENT_3D('',#60180,#60181,#60182); +#60180 = CARTESIAN_POINT('',(104.5,-110.9,-4.6E-02)); +#60181 = DIRECTION('',(-0.,-0.,-1.)); +#60182 = DIRECTION('',(-0.,-1.,0.)); +#60183 = ADVANCED_FACE('',(#60184),#60195,.F.); +#60184 = FACE_BOUND('',#60185,.T.); +#60185 = EDGE_LOOP('',(#60186,#60187,#60193,#60194)); +#60186 = ORIENTED_EDGE('',*,*,#57826,.T.); +#60187 = ORIENTED_EDGE('',*,*,#60188,.T.); +#60188 = EDGE_CURVE('',#57827,#58825,#60189,.T.); +#60189 = LINE('',#60190,#60191); +#60190 = CARTESIAN_POINT('',(120.32,-115.,-4.6E-02)); +#60191 = VECTOR('',#60192,1.); +#60192 = DIRECTION('',(0.,0.,1.)); +#60193 = ORIENTED_EDGE('',*,*,#58824,.F.); +#60194 = ORIENTED_EDGE('',*,*,#60188,.F.); +#60195 = CYLINDRICAL_SURFACE('',#60196,0.4); +#60196 = AXIS2_PLACEMENT_3D('',#60197,#60198,#60199); +#60197 = CARTESIAN_POINT('',(120.32,-114.6,-4.6E-02)); +#60198 = DIRECTION('',(-0.,-0.,-1.)); +#60199 = DIRECTION('',(-0.,-1.,0.)); +#60200 = ADVANCED_FACE('',(#60201),#60212,.F.); +#60201 = FACE_BOUND('',#60202,.T.); +#60202 = EDGE_LOOP('',(#60203,#60204,#60210,#60211)); +#60203 = ORIENTED_EDGE('',*,*,#57837,.T.); +#60204 = ORIENTED_EDGE('',*,*,#60205,.T.); +#60205 = EDGE_CURVE('',#57838,#58836,#60206,.T.); +#60206 = LINE('',#60207,#60208); +#60207 = CARTESIAN_POINT('',(104.5,-108.875,-4.6E-02)); +#60208 = VECTOR('',#60209,1.); +#60209 = DIRECTION('',(0.,0.,1.)); +#60210 = ORIENTED_EDGE('',*,*,#58835,.F.); +#60211 = ORIENTED_EDGE('',*,*,#60205,.F.); +#60212 = CYLINDRICAL_SURFACE('',#60213,0.475); +#60213 = AXIS2_PLACEMENT_3D('',#60214,#60215,#60216); +#60214 = CARTESIAN_POINT('',(104.5,-108.4,-4.6E-02)); +#60215 = DIRECTION('',(-0.,-0.,-1.)); +#60216 = DIRECTION('',(-0.,-1.,0.)); +#60217 = ADVANCED_FACE('',(#60218),#60229,.F.); +#60218 = FACE_BOUND('',#60219,.T.); +#60219 = EDGE_LOOP('',(#60220,#60221,#60227,#60228)); +#60220 = ORIENTED_EDGE('',*,*,#57848,.T.); +#60221 = ORIENTED_EDGE('',*,*,#60222,.T.); +#60222 = EDGE_CURVE('',#57849,#58847,#60223,.T.); +#60223 = LINE('',#60224,#60225); +#60224 = CARTESIAN_POINT('',(104.5,-106.375,-4.6E-02)); +#60225 = VECTOR('',#60226,1.); +#60226 = DIRECTION('',(0.,0.,1.)); +#60227 = ORIENTED_EDGE('',*,*,#58846,.F.); +#60228 = ORIENTED_EDGE('',*,*,#60222,.F.); +#60229 = CYLINDRICAL_SURFACE('',#60230,0.475); +#60230 = AXIS2_PLACEMENT_3D('',#60231,#60232,#60233); +#60231 = CARTESIAN_POINT('',(104.5,-105.9,-4.6E-02)); +#60232 = DIRECTION('',(-0.,-0.,-1.)); +#60233 = DIRECTION('',(-0.,-1.,0.)); +#60234 = ADVANCED_FACE('',(#60235),#60246,.F.); +#60235 = FACE_BOUND('',#60236,.T.); +#60236 = EDGE_LOOP('',(#60237,#60238,#60244,#60245)); +#60237 = ORIENTED_EDGE('',*,*,#57859,.T.); +#60238 = ORIENTED_EDGE('',*,*,#60239,.T.); +#60239 = EDGE_CURVE('',#57860,#58858,#60240,.T.); +#60240 = LINE('',#60241,#60242); +#60241 = CARTESIAN_POINT('',(104.5,-103.875,-4.6E-02)); +#60242 = VECTOR('',#60243,1.); +#60243 = DIRECTION('',(0.,0.,1.)); +#60244 = ORIENTED_EDGE('',*,*,#58857,.F.); +#60245 = ORIENTED_EDGE('',*,*,#60239,.F.); +#60246 = CYLINDRICAL_SURFACE('',#60247,0.475); +#60247 = AXIS2_PLACEMENT_3D('',#60248,#60249,#60250); +#60248 = CARTESIAN_POINT('',(104.5,-103.4,-4.6E-02)); +#60249 = DIRECTION('',(-0.,-0.,-1.)); +#60250 = DIRECTION('',(-0.,-1.,0.)); +#60251 = ADVANCED_FACE('',(#60252),#60263,.F.); +#60252 = FACE_BOUND('',#60253,.T.); +#60253 = EDGE_LOOP('',(#60254,#60255,#60261,#60262)); +#60254 = ORIENTED_EDGE('',*,*,#57870,.T.); +#60255 = ORIENTED_EDGE('',*,*,#60256,.T.); +#60256 = EDGE_CURVE('',#57871,#58869,#60257,.T.); +#60257 = LINE('',#60258,#60259); +#60258 = CARTESIAN_POINT('',(115.24,-109.14,-4.6E-02)); +#60259 = VECTOR('',#60260,1.); +#60260 = DIRECTION('',(0.,0.,1.)); +#60261 = ORIENTED_EDGE('',*,*,#58868,.F.); +#60262 = ORIENTED_EDGE('',*,*,#60256,.F.); +#60263 = CYLINDRICAL_SURFACE('',#60264,1.6); +#60264 = AXIS2_PLACEMENT_3D('',#60265,#60266,#60267); +#60265 = CARTESIAN_POINT('',(115.24,-107.54,-4.6E-02)); +#60266 = DIRECTION('',(-0.,-0.,-1.)); +#60267 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#60268 = ADVANCED_FACE('',(#60269),#60280,.F.); +#60269 = FACE_BOUND('',#60270,.T.); +#60270 = EDGE_LOOP('',(#60271,#60272,#60278,#60279)); +#60271 = ORIENTED_EDGE('',*,*,#57881,.T.); +#60272 = ORIENTED_EDGE('',*,*,#60273,.T.); +#60273 = EDGE_CURVE('',#57882,#58880,#60274,.T.); +#60274 = LINE('',#60275,#60276); +#60275 = CARTESIAN_POINT('',(120.32,-102.3,-4.6E-02)); +#60276 = VECTOR('',#60277,1.); +#60277 = DIRECTION('',(0.,0.,1.)); +#60278 = ORIENTED_EDGE('',*,*,#58879,.F.); +#60279 = ORIENTED_EDGE('',*,*,#60273,.F.); +#60280 = CYLINDRICAL_SURFACE('',#60281,0.4); +#60281 = AXIS2_PLACEMENT_3D('',#60282,#60283,#60284); +#60282 = CARTESIAN_POINT('',(120.32,-101.9,-4.6E-02)); +#60283 = DIRECTION('',(-0.,-0.,-1.)); +#60284 = DIRECTION('',(-0.,-1.,0.)); +#60285 = ADVANCED_FACE('',(#60286),#60297,.F.); +#60286 = FACE_BOUND('',#60287,.T.); +#60287 = EDGE_LOOP('',(#60288,#60289,#60295,#60296)); +#60288 = ORIENTED_EDGE('',*,*,#57892,.T.); +#60289 = ORIENTED_EDGE('',*,*,#60290,.T.); +#60290 = EDGE_CURVE('',#57893,#58891,#60291,.T.); +#60291 = LINE('',#60292,#60293); +#60292 = CARTESIAN_POINT('',(122.86,-115.,-4.6E-02)); +#60293 = VECTOR('',#60294,1.); +#60294 = DIRECTION('',(0.,0.,1.)); +#60295 = ORIENTED_EDGE('',*,*,#58890,.F.); +#60296 = ORIENTED_EDGE('',*,*,#60290,.F.); +#60297 = CYLINDRICAL_SURFACE('',#60298,0.4); +#60298 = AXIS2_PLACEMENT_3D('',#60299,#60300,#60301); +#60299 = CARTESIAN_POINT('',(122.86,-114.6,-4.6E-02)); +#60300 = DIRECTION('',(-0.,-0.,-1.)); +#60301 = DIRECTION('',(-0.,-1.,0.)); +#60302 = ADVANCED_FACE('',(#60303),#60314,.F.); +#60303 = FACE_BOUND('',#60304,.T.); +#60304 = EDGE_LOOP('',(#60305,#60306,#60312,#60313)); +#60305 = ORIENTED_EDGE('',*,*,#57903,.T.); +#60306 = ORIENTED_EDGE('',*,*,#60307,.T.); +#60307 = EDGE_CURVE('',#57904,#58902,#60308,.T.); +#60308 = LINE('',#60309,#60310); +#60309 = CARTESIAN_POINT('',(125.4,-115.,-4.6E-02)); +#60310 = VECTOR('',#60311,1.); +#60311 = DIRECTION('',(0.,0.,1.)); +#60312 = ORIENTED_EDGE('',*,*,#58901,.F.); +#60313 = ORIENTED_EDGE('',*,*,#60307,.F.); +#60314 = CYLINDRICAL_SURFACE('',#60315,0.4); +#60315 = AXIS2_PLACEMENT_3D('',#60316,#60317,#60318); +#60316 = CARTESIAN_POINT('',(125.4,-114.6,-4.6E-02)); +#60317 = DIRECTION('',(-0.,-0.,-1.)); +#60318 = DIRECTION('',(-0.,-1.,0.)); +#60319 = ADVANCED_FACE('',(#60320),#60331,.F.); +#60320 = FACE_BOUND('',#60321,.T.); +#60321 = EDGE_LOOP('',(#60322,#60323,#60329,#60330)); +#60322 = ORIENTED_EDGE('',*,*,#57914,.T.); +#60323 = ORIENTED_EDGE('',*,*,#60324,.T.); +#60324 = EDGE_CURVE('',#57915,#58913,#60325,.T.); +#60325 = LINE('',#60326,#60327); +#60326 = CARTESIAN_POINT('',(127.94,-115.,-4.6E-02)); +#60327 = VECTOR('',#60328,1.); +#60328 = DIRECTION('',(0.,0.,1.)); +#60329 = ORIENTED_EDGE('',*,*,#58912,.F.); +#60330 = ORIENTED_EDGE('',*,*,#60324,.F.); +#60331 = CYLINDRICAL_SURFACE('',#60332,0.4); +#60332 = AXIS2_PLACEMENT_3D('',#60333,#60334,#60335); +#60333 = CARTESIAN_POINT('',(127.94,-114.6,-4.6E-02)); +#60334 = DIRECTION('',(-0.,-0.,-1.)); +#60335 = DIRECTION('',(-0.,-1.,0.)); +#60336 = ADVANCED_FACE('',(#60337),#60348,.F.); +#60337 = FACE_BOUND('',#60338,.T.); +#60338 = EDGE_LOOP('',(#60339,#60340,#60346,#60347)); +#60339 = ORIENTED_EDGE('',*,*,#57925,.T.); +#60340 = ORIENTED_EDGE('',*,*,#60341,.T.); +#60341 = EDGE_CURVE('',#57926,#58924,#60342,.T.); +#60342 = LINE('',#60343,#60344); +#60343 = CARTESIAN_POINT('',(130.48,-115.,-4.6E-02)); +#60344 = VECTOR('',#60345,1.); +#60345 = DIRECTION('',(0.,0.,1.)); +#60346 = ORIENTED_EDGE('',*,*,#58923,.F.); +#60347 = ORIENTED_EDGE('',*,*,#60341,.F.); +#60348 = CYLINDRICAL_SURFACE('',#60349,0.4); +#60349 = AXIS2_PLACEMENT_3D('',#60350,#60351,#60352); +#60350 = CARTESIAN_POINT('',(130.48,-114.6,-4.6E-02)); +#60351 = DIRECTION('',(-0.,-0.,-1.)); +#60352 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#60353 = ADVANCED_FACE('',(#60354),#60365,.F.); +#60354 = FACE_BOUND('',#60355,.T.); +#60355 = EDGE_LOOP('',(#60356,#60357,#60363,#60364)); +#60356 = ORIENTED_EDGE('',*,*,#57936,.T.); +#60357 = ORIENTED_EDGE('',*,*,#60358,.T.); +#60358 = EDGE_CURVE('',#57937,#58935,#60359,.T.); +#60359 = LINE('',#60360,#60361); +#60360 = CARTESIAN_POINT('',(133.02,-115.,-4.6E-02)); +#60361 = VECTOR('',#60362,1.); +#60362 = DIRECTION('',(0.,0.,1.)); +#60363 = ORIENTED_EDGE('',*,*,#58934,.F.); +#60364 = ORIENTED_EDGE('',*,*,#60358,.F.); +#60365 = CYLINDRICAL_SURFACE('',#60366,0.4); +#60366 = AXIS2_PLACEMENT_3D('',#60367,#60368,#60369); +#60367 = CARTESIAN_POINT('',(133.02,-114.6,-4.6E-02)); +#60368 = DIRECTION('',(-0.,0.,-1.)); +#60369 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#60370 = ADVANCED_FACE('',(#60371),#60382,.F.); +#60371 = FACE_BOUND('',#60372,.T.); +#60372 = EDGE_LOOP('',(#60373,#60374,#60380,#60381)); +#60373 = ORIENTED_EDGE('',*,*,#57947,.T.); +#60374 = ORIENTED_EDGE('',*,*,#60375,.T.); +#60375 = EDGE_CURVE('',#57948,#58946,#60376,.T.); +#60376 = LINE('',#60377,#60378); +#60377 = CARTESIAN_POINT('',(135.56,-115.,-4.6E-02)); +#60378 = VECTOR('',#60379,1.); +#60379 = DIRECTION('',(0.,0.,1.)); +#60380 = ORIENTED_EDGE('',*,*,#58945,.F.); +#60381 = ORIENTED_EDGE('',*,*,#60375,.F.); +#60382 = CYLINDRICAL_SURFACE('',#60383,0.4); +#60383 = AXIS2_PLACEMENT_3D('',#60384,#60385,#60386); +#60384 = CARTESIAN_POINT('',(135.56,-114.6,-4.6E-02)); +#60385 = DIRECTION('',(-0.,-0.,-1.)); +#60386 = DIRECTION('',(-0.,-1.,0.)); +#60387 = ADVANCED_FACE('',(#60388),#60399,.F.); +#60388 = FACE_BOUND('',#60389,.T.); +#60389 = EDGE_LOOP('',(#60390,#60391,#60397,#60398)); +#60390 = ORIENTED_EDGE('',*,*,#57958,.T.); +#60391 = ORIENTED_EDGE('',*,*,#60392,.T.); +#60392 = EDGE_CURVE('',#57959,#58957,#60393,.T.); +#60393 = LINE('',#60394,#60395); +#60394 = CARTESIAN_POINT('',(138.1,-115.,-4.6E-02)); +#60395 = VECTOR('',#60396,1.); +#60396 = DIRECTION('',(0.,0.,1.)); +#60397 = ORIENTED_EDGE('',*,*,#58956,.F.); +#60398 = ORIENTED_EDGE('',*,*,#60392,.F.); +#60399 = CYLINDRICAL_SURFACE('',#60400,0.4); +#60400 = AXIS2_PLACEMENT_3D('',#60401,#60402,#60403); +#60401 = CARTESIAN_POINT('',(138.1,-114.6,-4.6E-02)); +#60402 = DIRECTION('',(-0.,-0.,-1.)); +#60403 = DIRECTION('',(-0.,-1.,0.)); +#60404 = ADVANCED_FACE('',(#60405),#60416,.F.); +#60405 = FACE_BOUND('',#60406,.T.); +#60406 = EDGE_LOOP('',(#60407,#60408,#60414,#60415)); +#60407 = ORIENTED_EDGE('',*,*,#57969,.T.); +#60408 = ORIENTED_EDGE('',*,*,#60409,.T.); +#60409 = EDGE_CURVE('',#57970,#58968,#60410,.T.); +#60410 = LINE('',#60411,#60412); +#60411 = CARTESIAN_POINT('',(122.86,-102.3,-4.6E-02)); +#60412 = VECTOR('',#60413,1.); +#60413 = DIRECTION('',(0.,0.,1.)); +#60414 = ORIENTED_EDGE('',*,*,#58967,.F.); +#60415 = ORIENTED_EDGE('',*,*,#60409,.F.); +#60416 = CYLINDRICAL_SURFACE('',#60417,0.4); +#60417 = AXIS2_PLACEMENT_3D('',#60418,#60419,#60420); +#60418 = CARTESIAN_POINT('',(122.86,-101.9,-4.6E-02)); +#60419 = DIRECTION('',(-0.,-0.,-1.)); +#60420 = DIRECTION('',(-0.,-1.,0.)); +#60421 = ADVANCED_FACE('',(#60422),#60433,.F.); +#60422 = FACE_BOUND('',#60423,.T.); +#60423 = EDGE_LOOP('',(#60424,#60425,#60431,#60432)); +#60424 = ORIENTED_EDGE('',*,*,#57980,.T.); +#60425 = ORIENTED_EDGE('',*,*,#60426,.T.); +#60426 = EDGE_CURVE('',#57981,#58979,#60427,.T.); +#60427 = LINE('',#60428,#60429); +#60428 = CARTESIAN_POINT('',(125.4,-102.3,-4.6E-02)); +#60429 = VECTOR('',#60430,1.); +#60430 = DIRECTION('',(0.,0.,1.)); +#60431 = ORIENTED_EDGE('',*,*,#58978,.F.); +#60432 = ORIENTED_EDGE('',*,*,#60426,.F.); +#60433 = CYLINDRICAL_SURFACE('',#60434,0.4); +#60434 = AXIS2_PLACEMENT_3D('',#60435,#60436,#60437); +#60435 = CARTESIAN_POINT('',(125.4,-101.9,-4.6E-02)); +#60436 = DIRECTION('',(-0.,-0.,-1.)); +#60437 = DIRECTION('',(-0.,-1.,0.)); +#60438 = ADVANCED_FACE('',(#60439),#60450,.F.); +#60439 = FACE_BOUND('',#60440,.T.); +#60440 = EDGE_LOOP('',(#60441,#60442,#60448,#60449)); +#60441 = ORIENTED_EDGE('',*,*,#57991,.T.); +#60442 = ORIENTED_EDGE('',*,*,#60443,.T.); +#60443 = EDGE_CURVE('',#57992,#58990,#60444,.T.); +#60444 = LINE('',#60445,#60446); +#60445 = CARTESIAN_POINT('',(127.94,-102.3,-4.6E-02)); +#60446 = VECTOR('',#60447,1.); +#60447 = DIRECTION('',(0.,0.,1.)); +#60448 = ORIENTED_EDGE('',*,*,#58989,.F.); +#60449 = ORIENTED_EDGE('',*,*,#60443,.F.); +#60450 = CYLINDRICAL_SURFACE('',#60451,0.4); +#60451 = AXIS2_PLACEMENT_3D('',#60452,#60453,#60454); +#60452 = CARTESIAN_POINT('',(127.94,-101.9,-4.6E-02)); +#60453 = DIRECTION('',(-0.,-0.,-1.)); +#60454 = DIRECTION('',(-0.,-1.,0.)); +#60455 = ADVANCED_FACE('',(#60456),#60467,.F.); +#60456 = FACE_BOUND('',#60457,.T.); +#60457 = EDGE_LOOP('',(#60458,#60459,#60465,#60466)); +#60458 = ORIENTED_EDGE('',*,*,#58002,.T.); +#60459 = ORIENTED_EDGE('',*,*,#60460,.T.); +#60460 = EDGE_CURVE('',#58003,#59001,#60461,.T.); +#60461 = LINE('',#60462,#60463); +#60462 = CARTESIAN_POINT('',(130.48,-102.3,-4.6E-02)); +#60463 = VECTOR('',#60464,1.); +#60464 = DIRECTION('',(0.,0.,1.)); +#60465 = ORIENTED_EDGE('',*,*,#59000,.F.); +#60466 = ORIENTED_EDGE('',*,*,#60460,.F.); +#60467 = CYLINDRICAL_SURFACE('',#60468,0.4); +#60468 = AXIS2_PLACEMENT_3D('',#60469,#60470,#60471); +#60469 = CARTESIAN_POINT('',(130.48,-101.9,-4.6E-02)); +#60470 = DIRECTION('',(-0.,-0.,-1.)); +#60471 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#60472 = ADVANCED_FACE('',(#60473),#60484,.F.); +#60473 = FACE_BOUND('',#60474,.T.); +#60474 = EDGE_LOOP('',(#60475,#60476,#60482,#60483)); +#60475 = ORIENTED_EDGE('',*,*,#58013,.T.); +#60476 = ORIENTED_EDGE('',*,*,#60477,.T.); +#60477 = EDGE_CURVE('',#58014,#59012,#60478,.T.); +#60478 = LINE('',#60479,#60480); +#60479 = CARTESIAN_POINT('',(133.02,-102.3,-4.6E-02)); +#60480 = VECTOR('',#60481,1.); +#60481 = DIRECTION('',(0.,0.,1.)); +#60482 = ORIENTED_EDGE('',*,*,#59011,.F.); +#60483 = ORIENTED_EDGE('',*,*,#60477,.F.); +#60484 = CYLINDRICAL_SURFACE('',#60485,0.4); +#60485 = AXIS2_PLACEMENT_3D('',#60486,#60487,#60488); +#60486 = CARTESIAN_POINT('',(133.02,-101.9,-4.6E-02)); +#60487 = DIRECTION('',(-0.,0.,-1.)); +#60488 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#60489 = ADVANCED_FACE('',(#60490),#60501,.F.); +#60490 = FACE_BOUND('',#60491,.T.); +#60491 = EDGE_LOOP('',(#60492,#60493,#60499,#60500)); +#60492 = ORIENTED_EDGE('',*,*,#58024,.T.); +#60493 = ORIENTED_EDGE('',*,*,#60494,.T.); +#60494 = EDGE_CURVE('',#58025,#59023,#60495,.T.); +#60495 = LINE('',#60496,#60497); +#60496 = CARTESIAN_POINT('',(135.56,-102.3,-4.6E-02)); +#60497 = VECTOR('',#60498,1.); +#60498 = DIRECTION('',(0.,0.,1.)); +#60499 = ORIENTED_EDGE('',*,*,#59022,.F.); +#60500 = ORIENTED_EDGE('',*,*,#60494,.F.); +#60501 = CYLINDRICAL_SURFACE('',#60502,0.4); +#60502 = AXIS2_PLACEMENT_3D('',#60503,#60504,#60505); +#60503 = CARTESIAN_POINT('',(135.56,-101.9,-4.6E-02)); +#60504 = DIRECTION('',(-0.,-0.,-1.)); +#60505 = DIRECTION('',(-0.,-1.,0.)); +#60506 = ADVANCED_FACE('',(#60507),#60518,.F.); +#60507 = FACE_BOUND('',#60508,.T.); +#60508 = EDGE_LOOP('',(#60509,#60510,#60516,#60517)); +#60509 = ORIENTED_EDGE('',*,*,#58035,.T.); +#60510 = ORIENTED_EDGE('',*,*,#60511,.T.); +#60511 = EDGE_CURVE('',#58036,#59034,#60512,.T.); +#60512 = LINE('',#60513,#60514); +#60513 = CARTESIAN_POINT('',(138.1,-102.3,-4.6E-02)); +#60514 = VECTOR('',#60515,1.); +#60515 = DIRECTION('',(0.,0.,1.)); +#60516 = ORIENTED_EDGE('',*,*,#59033,.F.); +#60517 = ORIENTED_EDGE('',*,*,#60511,.F.); +#60518 = CYLINDRICAL_SURFACE('',#60519,0.4); +#60519 = AXIS2_PLACEMENT_3D('',#60520,#60521,#60522); +#60520 = CARTESIAN_POINT('',(138.1,-101.9,-4.6E-02)); +#60521 = DIRECTION('',(-0.,-0.,-1.)); +#60522 = DIRECTION('',(-0.,-1.,0.)); +#60523 = ADVANCED_FACE('',(#60524),#60535,.F.); +#60524 = FACE_BOUND('',#60525,.T.); +#60525 = EDGE_LOOP('',(#60526,#60527,#60533,#60534)); +#60526 = ORIENTED_EDGE('',*,*,#58046,.T.); +#60527 = ORIENTED_EDGE('',*,*,#60528,.T.); +#60528 = EDGE_CURVE('',#58047,#59045,#60529,.T.); +#60529 = LINE('',#60530,#60531); +#60530 = CARTESIAN_POINT('',(176.5,-130.075,-4.6E-02)); +#60531 = VECTOR('',#60532,1.); +#60532 = DIRECTION('',(0.,0.,1.)); +#60533 = ORIENTED_EDGE('',*,*,#59044,.F.); +#60534 = ORIENTED_EDGE('',*,*,#60528,.F.); +#60535 = CYLINDRICAL_SURFACE('',#60536,0.475); +#60536 = AXIS2_PLACEMENT_3D('',#60537,#60538,#60539); +#60537 = CARTESIAN_POINT('',(176.5,-129.6,-4.6E-02)); +#60538 = DIRECTION('',(-0.,-0.,-1.)); +#60539 = DIRECTION('',(-0.,-1.,0.)); +#60540 = ADVANCED_FACE('',(#60541),#60552,.F.); +#60541 = FACE_BOUND('',#60542,.T.); +#60542 = EDGE_LOOP('',(#60543,#60544,#60550,#60551)); +#60543 = ORIENTED_EDGE('',*,*,#58057,.T.); +#60544 = ORIENTED_EDGE('',*,*,#60545,.T.); +#60545 = EDGE_CURVE('',#58058,#59056,#60546,.T.); +#60546 = LINE('',#60547,#60548); +#60547 = CARTESIAN_POINT('',(176.5,-123.975,-4.6E-02)); +#60548 = VECTOR('',#60549,1.); +#60549 = DIRECTION('',(0.,0.,1.)); +#60550 = ORIENTED_EDGE('',*,*,#59055,.F.); +#60551 = ORIENTED_EDGE('',*,*,#60545,.F.); +#60552 = CYLINDRICAL_SURFACE('',#60553,0.475); +#60553 = AXIS2_PLACEMENT_3D('',#60554,#60555,#60556); +#60554 = CARTESIAN_POINT('',(176.5,-123.5,-4.6E-02)); +#60555 = DIRECTION('',(-0.,-0.,-1.)); +#60556 = DIRECTION('',(-0.,-1.,0.)); +#60557 = ADVANCED_FACE('',(#60558),#60569,.F.); +#60558 = FACE_BOUND('',#60559,.T.); +#60559 = EDGE_LOOP('',(#60560,#60561,#60567,#60568)); +#60560 = ORIENTED_EDGE('',*,*,#58068,.T.); +#60561 = ORIENTED_EDGE('',*,*,#60562,.T.); +#60562 = EDGE_CURVE('',#58069,#59067,#60563,.T.); +#60563 = LINE('',#60564,#60565); +#60564 = CARTESIAN_POINT('',(166.04,-124.38,-4.6E-02)); +#60565 = VECTOR('',#60566,1.); +#60566 = DIRECTION('',(0.,0.,1.)); +#60567 = ORIENTED_EDGE('',*,*,#59066,.F.); +#60568 = ORIENTED_EDGE('',*,*,#60562,.F.); +#60569 = CYLINDRICAL_SURFACE('',#60570,1.6); +#60570 = AXIS2_PLACEMENT_3D('',#60571,#60572,#60573); +#60571 = CARTESIAN_POINT('',(166.04,-122.78,-4.6E-02)); +#60572 = DIRECTION('',(-0.,-0.,-1.)); +#60573 = DIRECTION('',(-0.,-1.,0.)); +#60574 = ADVANCED_FACE('',(#60575),#60586,.F.); +#60575 = FACE_BOUND('',#60576,.T.); +#60576 = EDGE_LOOP('',(#60577,#60578,#60584,#60585)); +#60577 = ORIENTED_EDGE('',*,*,#58079,.T.); +#60578 = ORIENTED_EDGE('',*,*,#60579,.T.); +#60579 = EDGE_CURVE('',#58080,#59078,#60580,.T.); +#60580 = LINE('',#60581,#60582); +#60581 = CARTESIAN_POINT('',(176.5,-121.475,-4.6E-02)); +#60582 = VECTOR('',#60583,1.); +#60583 = DIRECTION('',(0.,0.,1.)); +#60584 = ORIENTED_EDGE('',*,*,#59077,.F.); +#60585 = ORIENTED_EDGE('',*,*,#60579,.F.); +#60586 = CYLINDRICAL_SURFACE('',#60587,0.475); +#60587 = AXIS2_PLACEMENT_3D('',#60588,#60589,#60590); +#60588 = CARTESIAN_POINT('',(176.5,-121.,-4.6E-02)); +#60589 = DIRECTION('',(-0.,-0.,-1.)); +#60590 = DIRECTION('',(-0.,-1.,0.)); +#60591 = ADVANCED_FACE('',(#60592),#60603,.F.); +#60592 = FACE_BOUND('',#60593,.T.); +#60593 = EDGE_LOOP('',(#60594,#60595,#60601,#60602)); +#60594 = ORIENTED_EDGE('',*,*,#58090,.T.); +#60595 = ORIENTED_EDGE('',*,*,#60596,.T.); +#60596 = EDGE_CURVE('',#58091,#59089,#60597,.T.); +#60597 = LINE('',#60598,#60599); +#60598 = CARTESIAN_POINT('',(176.5,-118.975,-4.6E-02)); +#60599 = VECTOR('',#60600,1.); +#60600 = DIRECTION('',(0.,0.,1.)); +#60601 = ORIENTED_EDGE('',*,*,#59088,.F.); +#60602 = ORIENTED_EDGE('',*,*,#60596,.F.); +#60603 = CYLINDRICAL_SURFACE('',#60604,0.475); +#60604 = AXIS2_PLACEMENT_3D('',#60605,#60606,#60607); +#60605 = CARTESIAN_POINT('',(176.5,-118.5,-4.6E-02)); +#60606 = DIRECTION('',(-0.,-0.,-1.)); +#60607 = DIRECTION('',(-0.,-1.,0.)); +#60608 = ADVANCED_FACE('',(#60609),#60620,.F.); +#60609 = FACE_BOUND('',#60610,.T.); +#60610 = EDGE_LOOP('',(#60611,#60612,#60618,#60619)); +#60611 = ORIENTED_EDGE('',*,*,#58101,.T.); +#60612 = ORIENTED_EDGE('',*,*,#60613,.T.); +#60613 = EDGE_CURVE('',#58102,#59100,#60614,.T.); +#60614 = LINE('',#60615,#60616); +#60615 = CARTESIAN_POINT('',(141.32,-115.,-4.6E-02)); +#60616 = VECTOR('',#60617,1.); +#60617 = DIRECTION('',(0.,0.,1.)); +#60618 = ORIENTED_EDGE('',*,*,#59099,.F.); +#60619 = ORIENTED_EDGE('',*,*,#60613,.F.); +#60620 = CYLINDRICAL_SURFACE('',#60621,0.4); +#60621 = AXIS2_PLACEMENT_3D('',#60622,#60623,#60624); +#60622 = CARTESIAN_POINT('',(141.32,-114.6,-4.6E-02)); +#60623 = DIRECTION('',(-0.,-0.,-1.)); +#60624 = DIRECTION('',(-0.,-1.,0.)); +#60625 = ADVANCED_FACE('',(#60626),#60637,.F.); +#60626 = FACE_BOUND('',#60627,.T.); +#60627 = EDGE_LOOP('',(#60628,#60629,#60635,#60636)); +#60628 = ORIENTED_EDGE('',*,*,#58112,.T.); +#60629 = ORIENTED_EDGE('',*,*,#60630,.T.); +#60630 = EDGE_CURVE('',#58113,#59111,#60631,.T.); +#60631 = LINE('',#60632,#60633); +#60632 = CARTESIAN_POINT('',(143.86,-115.,-4.6E-02)); +#60633 = VECTOR('',#60634,1.); +#60634 = DIRECTION('',(0.,0.,1.)); +#60635 = ORIENTED_EDGE('',*,*,#59110,.F.); +#60636 = ORIENTED_EDGE('',*,*,#60630,.F.); +#60637 = CYLINDRICAL_SURFACE('',#60638,0.4); +#60638 = AXIS2_PLACEMENT_3D('',#60639,#60640,#60641); +#60639 = CARTESIAN_POINT('',(143.86,-114.6,-4.6E-02)); +#60640 = DIRECTION('',(-0.,-0.,-1.)); +#60641 = DIRECTION('',(-0.,-1.,0.)); +#60642 = ADVANCED_FACE('',(#60643),#60654,.F.); +#60643 = FACE_BOUND('',#60644,.T.); +#60644 = EDGE_LOOP('',(#60645,#60646,#60652,#60653)); +#60645 = ORIENTED_EDGE('',*,*,#58123,.T.); +#60646 = ORIENTED_EDGE('',*,*,#60647,.T.); +#60647 = EDGE_CURVE('',#58124,#59122,#60648,.T.); +#60648 = LINE('',#60649,#60650); +#60649 = CARTESIAN_POINT('',(146.4,-115.,-4.6E-02)); +#60650 = VECTOR('',#60651,1.); +#60651 = DIRECTION('',(0.,0.,1.)); +#60652 = ORIENTED_EDGE('',*,*,#59121,.F.); +#60653 = ORIENTED_EDGE('',*,*,#60647,.F.); +#60654 = CYLINDRICAL_SURFACE('',#60655,0.4); +#60655 = AXIS2_PLACEMENT_3D('',#60656,#60657,#60658); +#60656 = CARTESIAN_POINT('',(146.4,-114.6,-4.6E-02)); +#60657 = DIRECTION('',(-0.,-0.,-1.)); +#60658 = DIRECTION('',(-0.,-1.,0.)); +#60659 = ADVANCED_FACE('',(#60660),#60671,.F.); +#60660 = FACE_BOUND('',#60661,.T.); +#60661 = EDGE_LOOP('',(#60662,#60663,#60669,#60670)); +#60662 = ORIENTED_EDGE('',*,*,#58134,.T.); +#60663 = ORIENTED_EDGE('',*,*,#60664,.T.); +#60664 = EDGE_CURVE('',#58135,#59133,#60665,.T.); +#60665 = LINE('',#60666,#60667); +#60666 = CARTESIAN_POINT('',(148.94,-115.,-4.6E-02)); +#60667 = VECTOR('',#60668,1.); +#60668 = DIRECTION('',(0.,0.,1.)); +#60669 = ORIENTED_EDGE('',*,*,#59132,.F.); +#60670 = ORIENTED_EDGE('',*,*,#60664,.F.); +#60671 = CYLINDRICAL_SURFACE('',#60672,0.4); +#60672 = AXIS2_PLACEMENT_3D('',#60673,#60674,#60675); +#60673 = CARTESIAN_POINT('',(148.94,-114.6,-4.6E-02)); +#60674 = DIRECTION('',(-0.,-0.,-1.)); +#60675 = DIRECTION('',(-0.,-1.,0.)); +#60676 = ADVANCED_FACE('',(#60677),#60688,.F.); +#60677 = FACE_BOUND('',#60678,.T.); +#60678 = EDGE_LOOP('',(#60679,#60680,#60686,#60687)); +#60679 = ORIENTED_EDGE('',*,*,#58145,.T.); +#60680 = ORIENTED_EDGE('',*,*,#60681,.T.); +#60681 = EDGE_CURVE('',#58146,#59144,#60682,.T.); +#60682 = LINE('',#60683,#60684); +#60683 = CARTESIAN_POINT('',(151.48,-115.,-4.6E-02)); +#60684 = VECTOR('',#60685,1.); +#60685 = DIRECTION('',(0.,0.,1.)); +#60686 = ORIENTED_EDGE('',*,*,#59143,.F.); +#60687 = ORIENTED_EDGE('',*,*,#60681,.F.); +#60688 = CYLINDRICAL_SURFACE('',#60689,0.4); +#60689 = AXIS2_PLACEMENT_3D('',#60690,#60691,#60692); +#60690 = CARTESIAN_POINT('',(151.48,-114.6,-4.6E-02)); +#60691 = DIRECTION('',(-0.,-0.,-1.)); +#60692 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#60693 = ADVANCED_FACE('',(#60694),#60705,.F.); +#60694 = FACE_BOUND('',#60695,.T.); +#60695 = EDGE_LOOP('',(#60696,#60697,#60703,#60704)); +#60696 = ORIENTED_EDGE('',*,*,#58156,.T.); +#60697 = ORIENTED_EDGE('',*,*,#60698,.T.); +#60698 = EDGE_CURVE('',#58157,#59155,#60699,.T.); +#60699 = LINE('',#60700,#60701); +#60700 = CARTESIAN_POINT('',(154.02,-115.,-4.6E-02)); +#60701 = VECTOR('',#60702,1.); +#60702 = DIRECTION('',(0.,0.,1.)); +#60703 = ORIENTED_EDGE('',*,*,#59154,.F.); +#60704 = ORIENTED_EDGE('',*,*,#60698,.F.); +#60705 = CYLINDRICAL_SURFACE('',#60706,0.4); +#60706 = AXIS2_PLACEMENT_3D('',#60707,#60708,#60709); +#60707 = CARTESIAN_POINT('',(154.02,-114.6,-4.6E-02)); +#60708 = DIRECTION('',(-0.,0.,-1.)); +#60709 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#60710 = ADVANCED_FACE('',(#60711),#60722,.F.); +#60711 = FACE_BOUND('',#60712,.T.); +#60712 = EDGE_LOOP('',(#60713,#60714,#60720,#60721)); +#60713 = ORIENTED_EDGE('',*,*,#58167,.T.); +#60714 = ORIENTED_EDGE('',*,*,#60715,.T.); +#60715 = EDGE_CURVE('',#58168,#59166,#60716,.T.); +#60716 = LINE('',#60717,#60718); +#60717 = CARTESIAN_POINT('',(156.56,-115.,-4.6E-02)); +#60718 = VECTOR('',#60719,1.); +#60719 = DIRECTION('',(0.,0.,1.)); +#60720 = ORIENTED_EDGE('',*,*,#59165,.F.); +#60721 = ORIENTED_EDGE('',*,*,#60715,.F.); +#60722 = CYLINDRICAL_SURFACE('',#60723,0.4); +#60723 = AXIS2_PLACEMENT_3D('',#60724,#60725,#60726); +#60724 = CARTESIAN_POINT('',(156.56,-114.6,-4.6E-02)); +#60725 = DIRECTION('',(-0.,-0.,-1.)); +#60726 = DIRECTION('',(-0.,-1.,0.)); +#60727 = ADVANCED_FACE('',(#60728),#60739,.F.); +#60728 = FACE_BOUND('',#60729,.T.); +#60729 = EDGE_LOOP('',(#60730,#60731,#60737,#60738)); +#60730 = ORIENTED_EDGE('',*,*,#58178,.T.); +#60731 = ORIENTED_EDGE('',*,*,#60732,.T.); +#60732 = EDGE_CURVE('',#58179,#59177,#60733,.T.); +#60733 = LINE('',#60734,#60735); +#60734 = CARTESIAN_POINT('',(141.32,-102.3,-4.6E-02)); +#60735 = VECTOR('',#60736,1.); +#60736 = DIRECTION('',(0.,0.,1.)); +#60737 = ORIENTED_EDGE('',*,*,#59176,.F.); +#60738 = ORIENTED_EDGE('',*,*,#60732,.F.); +#60739 = CYLINDRICAL_SURFACE('',#60740,0.4); +#60740 = AXIS2_PLACEMENT_3D('',#60741,#60742,#60743); +#60741 = CARTESIAN_POINT('',(141.32,-101.9,-4.6E-02)); +#60742 = DIRECTION('',(-0.,-0.,-1.)); +#60743 = DIRECTION('',(-0.,-1.,0.)); +#60744 = ADVANCED_FACE('',(#60745),#60756,.F.); +#60745 = FACE_BOUND('',#60746,.T.); +#60746 = EDGE_LOOP('',(#60747,#60748,#60754,#60755)); +#60747 = ORIENTED_EDGE('',*,*,#58189,.T.); +#60748 = ORIENTED_EDGE('',*,*,#60749,.T.); +#60749 = EDGE_CURVE('',#58190,#59188,#60750,.T.); +#60750 = LINE('',#60751,#60752); +#60751 = CARTESIAN_POINT('',(143.86,-102.3,-4.6E-02)); +#60752 = VECTOR('',#60753,1.); +#60753 = DIRECTION('',(0.,0.,1.)); +#60754 = ORIENTED_EDGE('',*,*,#59187,.F.); +#60755 = ORIENTED_EDGE('',*,*,#60749,.F.); +#60756 = CYLINDRICAL_SURFACE('',#60757,0.4); +#60757 = AXIS2_PLACEMENT_3D('',#60758,#60759,#60760); +#60758 = CARTESIAN_POINT('',(143.86,-101.9,-4.6E-02)); +#60759 = DIRECTION('',(-0.,-0.,-1.)); +#60760 = DIRECTION('',(-0.,-1.,0.)); +#60761 = ADVANCED_FACE('',(#60762),#60773,.F.); +#60762 = FACE_BOUND('',#60763,.T.); +#60763 = EDGE_LOOP('',(#60764,#60765,#60771,#60772)); +#60764 = ORIENTED_EDGE('',*,*,#58200,.T.); +#60765 = ORIENTED_EDGE('',*,*,#60766,.T.); +#60766 = EDGE_CURVE('',#58201,#59199,#60767,.T.); +#60767 = LINE('',#60768,#60769); +#60768 = CARTESIAN_POINT('',(146.4,-102.3,-4.6E-02)); +#60769 = VECTOR('',#60770,1.); +#60770 = DIRECTION('',(0.,0.,1.)); +#60771 = ORIENTED_EDGE('',*,*,#59198,.F.); +#60772 = ORIENTED_EDGE('',*,*,#60766,.F.); +#60773 = CYLINDRICAL_SURFACE('',#60774,0.4); +#60774 = AXIS2_PLACEMENT_3D('',#60775,#60776,#60777); +#60775 = CARTESIAN_POINT('',(146.4,-101.9,-4.6E-02)); +#60776 = DIRECTION('',(-0.,-0.,-1.)); +#60777 = DIRECTION('',(-0.,-1.,0.)); +#60778 = ADVANCED_FACE('',(#60779),#60790,.F.); +#60779 = FACE_BOUND('',#60780,.T.); +#60780 = EDGE_LOOP('',(#60781,#60782,#60788,#60789)); +#60781 = ORIENTED_EDGE('',*,*,#58211,.T.); +#60782 = ORIENTED_EDGE('',*,*,#60783,.T.); +#60783 = EDGE_CURVE('',#58212,#59210,#60784,.T.); +#60784 = LINE('',#60785,#60786); +#60785 = CARTESIAN_POINT('',(148.94,-102.3,-4.6E-02)); +#60786 = VECTOR('',#60787,1.); +#60787 = DIRECTION('',(0.,0.,1.)); +#60788 = ORIENTED_EDGE('',*,*,#59209,.F.); +#60789 = ORIENTED_EDGE('',*,*,#60783,.F.); +#60790 = CYLINDRICAL_SURFACE('',#60791,0.4); +#60791 = AXIS2_PLACEMENT_3D('',#60792,#60793,#60794); +#60792 = CARTESIAN_POINT('',(148.94,-101.9,-4.6E-02)); +#60793 = DIRECTION('',(-0.,-0.,-1.)); +#60794 = DIRECTION('',(-0.,-1.,0.)); +#60795 = ADVANCED_FACE('',(#60796),#60807,.F.); +#60796 = FACE_BOUND('',#60797,.T.); +#60797 = EDGE_LOOP('',(#60798,#60799,#60805,#60806)); +#60798 = ORIENTED_EDGE('',*,*,#58222,.T.); +#60799 = ORIENTED_EDGE('',*,*,#60800,.T.); +#60800 = EDGE_CURVE('',#58223,#59221,#60801,.T.); +#60801 = LINE('',#60802,#60803); +#60802 = CARTESIAN_POINT('',(151.48,-102.3,-4.6E-02)); +#60803 = VECTOR('',#60804,1.); +#60804 = DIRECTION('',(0.,0.,1.)); +#60805 = ORIENTED_EDGE('',*,*,#59220,.F.); +#60806 = ORIENTED_EDGE('',*,*,#60800,.F.); +#60807 = CYLINDRICAL_SURFACE('',#60808,0.4); +#60808 = AXIS2_PLACEMENT_3D('',#60809,#60810,#60811); +#60809 = CARTESIAN_POINT('',(151.48,-101.9,-4.6E-02)); +#60810 = DIRECTION('',(-0.,-0.,-1.)); +#60811 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#60812 = ADVANCED_FACE('',(#60813),#60824,.F.); +#60813 = FACE_BOUND('',#60814,.T.); +#60814 = EDGE_LOOP('',(#60815,#60816,#60822,#60823)); +#60815 = ORIENTED_EDGE('',*,*,#58233,.T.); +#60816 = ORIENTED_EDGE('',*,*,#60817,.T.); +#60817 = EDGE_CURVE('',#58234,#59232,#60818,.T.); +#60818 = LINE('',#60819,#60820); +#60819 = CARTESIAN_POINT('',(154.02,-102.3,-4.6E-02)); +#60820 = VECTOR('',#60821,1.); +#60821 = DIRECTION('',(0.,0.,1.)); +#60822 = ORIENTED_EDGE('',*,*,#59231,.F.); +#60823 = ORIENTED_EDGE('',*,*,#60817,.F.); +#60824 = CYLINDRICAL_SURFACE('',#60825,0.4); +#60825 = AXIS2_PLACEMENT_3D('',#60826,#60827,#60828); +#60826 = CARTESIAN_POINT('',(154.02,-101.9,-4.6E-02)); +#60827 = DIRECTION('',(-0.,0.,-1.)); +#60828 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#60829 = ADVANCED_FACE('',(#60830),#60841,.F.); +#60830 = FACE_BOUND('',#60831,.T.); +#60831 = EDGE_LOOP('',(#60832,#60833,#60839,#60840)); +#60832 = ORIENTED_EDGE('',*,*,#58244,.T.); +#60833 = ORIENTED_EDGE('',*,*,#60834,.T.); +#60834 = EDGE_CURVE('',#58245,#59243,#60835,.T.); +#60835 = LINE('',#60836,#60837); +#60836 = CARTESIAN_POINT('',(156.56,-102.3,-4.6E-02)); +#60837 = VECTOR('',#60838,1.); +#60838 = DIRECTION('',(0.,0.,1.)); +#60839 = ORIENTED_EDGE('',*,*,#59242,.F.); +#60840 = ORIENTED_EDGE('',*,*,#60834,.F.); +#60841 = CYLINDRICAL_SURFACE('',#60842,0.4); +#60842 = AXIS2_PLACEMENT_3D('',#60843,#60844,#60845); +#60843 = CARTESIAN_POINT('',(156.56,-101.9,-4.6E-02)); +#60844 = DIRECTION('',(-0.,-0.,-1.)); +#60845 = DIRECTION('',(-0.,-1.,0.)); +#60846 = ADVANCED_FACE('',(#60847),#60858,.F.); +#60847 = FACE_BOUND('',#60848,.T.); +#60848 = EDGE_LOOP('',(#60849,#60850,#60856,#60857)); +#60849 = ORIENTED_EDGE('',*,*,#58255,.T.); +#60850 = ORIENTED_EDGE('',*,*,#60851,.T.); +#60851 = EDGE_CURVE('',#58256,#59254,#60852,.T.); +#60852 = LINE('',#60853,#60854); +#60853 = CARTESIAN_POINT('',(159.1,-115.,-4.6E-02)); +#60854 = VECTOR('',#60855,1.); +#60855 = DIRECTION('',(0.,0.,1.)); +#60856 = ORIENTED_EDGE('',*,*,#59253,.F.); +#60857 = ORIENTED_EDGE('',*,*,#60851,.F.); +#60858 = CYLINDRICAL_SURFACE('',#60859,0.4); +#60859 = AXIS2_PLACEMENT_3D('',#60860,#60861,#60862); +#60860 = CARTESIAN_POINT('',(159.1,-114.6,-4.6E-02)); +#60861 = DIRECTION('',(-0.,-0.,-1.)); +#60862 = DIRECTION('',(-0.,-1.,0.)); +#60863 = ADVANCED_FACE('',(#60864),#60875,.F.); +#60864 = FACE_BOUND('',#60865,.T.); +#60865 = EDGE_LOOP('',(#60866,#60867,#60873,#60874)); +#60866 = ORIENTED_EDGE('',*,*,#58266,.T.); +#60867 = ORIENTED_EDGE('',*,*,#60868,.T.); +#60868 = EDGE_CURVE('',#58267,#59265,#60869,.T.); +#60869 = LINE('',#60870,#60871); +#60870 = CARTESIAN_POINT('',(176.5,-111.375,-4.6E-02)); +#60871 = VECTOR('',#60872,1.); +#60872 = DIRECTION('',(0.,0.,1.)); +#60873 = ORIENTED_EDGE('',*,*,#59264,.F.); +#60874 = ORIENTED_EDGE('',*,*,#60868,.F.); +#60875 = CYLINDRICAL_SURFACE('',#60876,0.475); +#60876 = AXIS2_PLACEMENT_3D('',#60877,#60878,#60879); +#60877 = CARTESIAN_POINT('',(176.5,-110.9,-4.6E-02)); +#60878 = DIRECTION('',(-0.,-0.,-1.)); +#60879 = DIRECTION('',(-0.,-1.,0.)); +#60880 = ADVANCED_FACE('',(#60881),#60892,.F.); +#60881 = FACE_BOUND('',#60882,.T.); +#60882 = EDGE_LOOP('',(#60883,#60884,#60890,#60891)); +#60883 = ORIENTED_EDGE('',*,*,#58277,.T.); +#60884 = ORIENTED_EDGE('',*,*,#60885,.T.); +#60885 = EDGE_CURVE('',#58278,#59276,#60886,.T.); +#60886 = LINE('',#60887,#60888); +#60887 = CARTESIAN_POINT('',(159.1,-102.3,-4.6E-02)); +#60888 = VECTOR('',#60889,1.); +#60889 = DIRECTION('',(0.,0.,1.)); +#60890 = ORIENTED_EDGE('',*,*,#59275,.F.); +#60891 = ORIENTED_EDGE('',*,*,#60885,.F.); +#60892 = CYLINDRICAL_SURFACE('',#60893,0.4); +#60893 = AXIS2_PLACEMENT_3D('',#60894,#60895,#60896); +#60894 = CARTESIAN_POINT('',(159.1,-101.9,-4.6E-02)); +#60895 = DIRECTION('',(-0.,-0.,-1.)); +#60896 = DIRECTION('',(-0.,-1.,0.)); +#60897 = ADVANCED_FACE('',(#60898),#60909,.F.); +#60898 = FACE_BOUND('',#60899,.T.); +#60899 = EDGE_LOOP('',(#60900,#60901,#60907,#60908)); +#60900 = ORIENTED_EDGE('',*,*,#58288,.T.); +#60901 = ORIENTED_EDGE('',*,*,#60902,.T.); +#60902 = EDGE_CURVE('',#58289,#59287,#60903,.T.); +#60903 = LINE('',#60904,#60905); +#60904 = CARTESIAN_POINT('',(176.5,-108.875,-4.6E-02)); +#60905 = VECTOR('',#60906,1.); +#60906 = DIRECTION('',(0.,0.,1.)); +#60907 = ORIENTED_EDGE('',*,*,#59286,.F.); +#60908 = ORIENTED_EDGE('',*,*,#60902,.F.); +#60909 = CYLINDRICAL_SURFACE('',#60910,0.475); +#60910 = AXIS2_PLACEMENT_3D('',#60911,#60912,#60913); +#60911 = CARTESIAN_POINT('',(176.5,-108.4,-4.6E-02)); +#60912 = DIRECTION('',(-0.,-0.,-1.)); +#60913 = DIRECTION('',(-0.,-1.,0.)); +#60914 = ADVANCED_FACE('',(#60915),#60926,.F.); +#60915 = FACE_BOUND('',#60916,.T.); +#60916 = EDGE_LOOP('',(#60917,#60918,#60924,#60925)); +#60917 = ORIENTED_EDGE('',*,*,#58299,.T.); +#60918 = ORIENTED_EDGE('',*,*,#60919,.T.); +#60919 = EDGE_CURVE('',#58300,#59298,#60920,.T.); +#60920 = LINE('',#60921,#60922); +#60921 = CARTESIAN_POINT('',(176.5,-106.375,-4.6E-02)); +#60922 = VECTOR('',#60923,1.); +#60923 = DIRECTION('',(0.,0.,1.)); +#60924 = ORIENTED_EDGE('',*,*,#59297,.F.); +#60925 = ORIENTED_EDGE('',*,*,#60919,.F.); +#60926 = CYLINDRICAL_SURFACE('',#60927,0.475); +#60927 = AXIS2_PLACEMENT_3D('',#60928,#60929,#60930); +#60928 = CARTESIAN_POINT('',(176.5,-105.9,-4.6E-02)); +#60929 = DIRECTION('',(-0.,-0.,-1.)); +#60930 = DIRECTION('',(-0.,-1.,0.)); +#60931 = ADVANCED_FACE('',(#60932),#60943,.F.); +#60932 = FACE_BOUND('',#60933,.T.); +#60933 = EDGE_LOOP('',(#60934,#60935,#60941,#60942)); +#60934 = ORIENTED_EDGE('',*,*,#58310,.T.); +#60935 = ORIENTED_EDGE('',*,*,#60936,.T.); +#60936 = EDGE_CURVE('',#58311,#59309,#60937,.T.); +#60937 = LINE('',#60938,#60939); +#60938 = CARTESIAN_POINT('',(176.5,-103.875,-4.6E-02)); +#60939 = VECTOR('',#60940,1.); +#60940 = DIRECTION('',(0.,0.,1.)); +#60941 = ORIENTED_EDGE('',*,*,#59308,.F.); +#60942 = ORIENTED_EDGE('',*,*,#60936,.F.); +#60943 = CYLINDRICAL_SURFACE('',#60944,0.475); +#60944 = AXIS2_PLACEMENT_3D('',#60945,#60946,#60947); +#60945 = CARTESIAN_POINT('',(176.5,-103.4,-4.6E-02)); +#60946 = DIRECTION('',(-0.,-0.,-1.)); +#60947 = DIRECTION('',(-0.,-1.,0.)); +#60948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#60952)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#60949,#60950,#60951)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#60949 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#60950 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#60951 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#60952 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#60949, + 'distance_accuracy_value','confusion accuracy'); +#60953 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#60954,#60956); +#60954 = ( REPRESENTATION_RELATIONSHIP('','',#57220,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#60955) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#60955 = ITEM_DEFINED_TRANSFORMATION('','',#11,#207); +#60956 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #60957); +#60957 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('49','=>[0:1:1:21]','',#5,#57215 + ,$); +#60958 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#57217)); +#60959 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #60960),#60948); +#60960 = STYLED_ITEM('color',(#60961),#57221); +#60961 = PRESENTATION_STYLE_ASSIGNMENT((#60962)); +#60962 = SURFACE_STYLE_USAGE(.BOTH.,#60963); +#60963 = SURFACE_SIDE_STYLE('',(#60964)); +#60964 = SURFACE_STYLE_FILL_AREA(#60965); +#60965 = FILL_AREA_STYLE('',(#60966)); +#60966 = FILL_AREA_STYLE_COLOUR('',#60967); +#60967 = COLOUR_RGB('',0.313304153717,0.484529207832,0.410020903123); +ENDSEC; +END-ISO-10303-21; diff --git a/pcb/fluidnc/config.yaml b/pcb/fluidnc/config.yaml new file mode 100644 index 0000000..d0e1d71 --- /dev/null +++ b/pcb/fluidnc/config.yaml @@ -0,0 +1,77 @@ +# FluidNC config for the SandTable Controller v0.3 (ESP32 + 2x DRV8825 at 1/32 step). +# A starting point: not yet run on real hardware. +# +# Units +# X = theta (arm angle) in DEGREES +# 200 steps x 32 microsteps x (80T hub / 20T motor pulley) = 25600 steps per arm turn = 71.111 per degree +# Y = rho (ball distance from the centre) in MM +# 200 steps x 32 microsteps / (20T GT2 pulley = 40 mm per turn) = 160 steps per mm +# +# If an axis turns the wrong way, add :low to its direction_pin (for example gpio.19:low) +# or flip one coil's plug. + +board: SandTable Controller v0.3 +name: Sand Table + +stepping: + engine: RMT + idle_ms: 255 # 255 = never switch the motors off, so the arm can't drift + pulse_us: 4 # DRV8825 needs at least 1.9 us + dir_delay_us: 2 # DRV8825 needs at least 0.65 us + disable_delay_us: 0 + +axes: + shared_stepper_disable_pin: gpio.13 # high = drivers off (a pull-up keeps them off during boot) + + x: # theta, degrees + steps_per_mm: 71.111 + max_rate_mm_per_min: 3600 # 10 arm turns per minute + acceleration_mm_per_sec2: 120 + max_travel_mm: 360 # only sets how far $HX searches; theta is unlimited + soft_limits: false + homing: + cycle: 0 # not part of $H. With a hall sensor fitted, home theta by hand with $HX + positive_direction: true + mpos_mm: 0 + feed_mm_per_min: 120 + seek_mm_per_min: 720 + settle_ms: 250 + seek_scaler: 1.1 + feed_scaler: 1.1 + motor0: + limit_neg_pin: NO_PIN + limit_pos_pin: NO_PIN + limit_all_pin: gpio.35:low # HALL connector (active low, pulled up on the board) + hard_limits: false + pulloff_mm: 5 + stepstick: + step_pin: gpio.18 + direction_pin: gpio.19 + disable_pin: NO_PIN + + y: # rho, mm + steps_per_mm: 160 + max_rate_mm_per_min: 1500 + acceleration_mm_per_sec2: 100 + max_travel_mm: 135 + soft_limits: false + homing: + cycle: 1 # $H homes rho + positive_direction: false # the home switch is at the centre end of the arm + mpos_mm: 3 # switch trips near rho 2 mm, then backs off 1 mm. Tune so Y0 is dead centre + feed_mm_per_min: 100 + seek_mm_per_min: 600 + settle_ms: 250 + seek_scaler: 1.1 + feed_scaler: 1.1 + motor0: + limit_neg_pin: gpio.34:low # HOME connector: switch COM to GND (pin 3), NO to signal (pin 2) + limit_pos_pin: NO_PIN + limit_all_pin: NO_PIN + hard_limits: true # patterns stay 1 mm past the switch (rho_min_mm = 3), so a press + # while drawing means lost steps: FluidNC stops at once by itself + pulloff_mm: 1 + stepstick: + step_pin: gpio.27 + direction_pin: gpio.14 + disable_pin: NO_PIN diff --git a/pcb/kicad/fp-lib-table b/pcb/kicad/fp-lib-table new file mode 100644 index 0000000..0296d69 --- /dev/null +++ b/pcb/kicad/fp-lib-table @@ -0,0 +1,20 @@ +(fp_lib_table + (version 7) + (lib (name "Button_Switch_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Button_Switch_SMD.pretty")(options "")(descr "")) + (lib (name "Capacitor_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Capacitor_SMD.pretty")(options "")(descr "")) + (lib (name "Connector_BarrelJack")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_BarrelJack.pretty")(options "")(descr "")) + (lib (name "Connector_JST")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_JST.pretty")(options "")(descr "")) + (lib (name "Connector_PinHeader_2.54mm")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_PinHeader_2.54mm.pretty")(options "")(descr "")) + (lib (name "Connector_USB")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Connector_USB.pretty")(options "")(descr "")) + (lib (name "Converter_DCDC")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Converter_DCDC.pretty")(options "")(descr "")) + (lib (name "Diode_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Diode_SMD.pretty")(options "")(descr "")) + (lib (name "Fuse")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Fuse.pretty")(options "")(descr "")) + (lib (name "Jumper")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Jumper.pretty")(options "")(descr "")) + (lib (name "LED_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/LED_SMD.pretty")(options "")(descr "")) + (lib (name "Module")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Module.pretty")(options "")(descr "")) + (lib (name "MountingHole")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/MountingHole.pretty")(options "")(descr "")) + (lib (name "Package_SO")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Package_SO.pretty")(options "")(descr "")) + (lib (name "Package_TO_SOT_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Package_TO_SOT_SMD.pretty")(options "")(descr "")) + (lib (name "RF_Module")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/RF_Module.pretty")(options "")(descr "")) + (lib (name "Resistor_SMD")(type "KiCad")(uri "${KICAD9_FOOTPRINT_DIR}/Resistor_SMD.pretty")(options "")(descr "")) +) diff --git a/pcb/kicad/sandtable-controller.kicad_pcb b/pcb/kicad/sandtable-controller.kicad_pcb new file mode 100644 index 0000000..7a107e6 --- /dev/null +++ b/pcb/kicad/sandtable-controller.kicad_pcb @@ -0,0 +1,32344 @@ +(kicad_pcb + (version 20241229) + (generator "pcbnew") + (generator_version "9.0") + (general + (thickness 1.6) + (legacy_teardrops no) + ) + (paper "A4") + (title_block + (title "SandTable Controller") + (date "2026-10-22") + (rev "0.4") + (company "lazypugs") + (comment 1 "ESP32 + 2x DRV8825 StepStick, drop-in for the Uno bay") + ) + (layers + (0 "F.Cu" signal) + (2 "B.Cu" signal) + (9 "F.Adhes" user "F.Adhesive") + (11 "B.Adhes" user "B.Adhesive") + (13 "F.Paste" user) + (15 "B.Paste" user) + (5 "F.SilkS" user "F.Silkscreen") + (7 "B.SilkS" user "B.Silkscreen") + (1 "F.Mask" user) + (3 "B.Mask" user) + (17 "Dwgs.User" user "User.Drawings") + (19 "Cmts.User" user "User.Comments") + (21 "Eco1.User" user "User.Eco1") + (23 "Eco2.User" user "User.Eco2") + (25 "Edge.Cuts" user) + (27 "Margin" user) + (31 "F.CrtYd" user "F.Courtyard") + (29 "B.CrtYd" user "B.Courtyard") + (35 "F.Fab" user) + (33 "B.Fab" user) + ) + (setup + (pad_to_mask_clearance 0) + (allow_soldermask_bridges_in_footprints no) + (tenting front back) + (aux_axis_origin 100 163.34) + (pcbplotparams + (layerselection 0x00000000_00000000_55555555_5755f5ff) + (plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000) + (disableapertmacros no) + (usegerberextensions no) + (usegerberattributes yes) + (usegerberadvancedattributes yes) + (creategerberjobfile yes) + (svgprecision 4) + (plotframeref no) + (mode 1) + (useauxorigin no) + (outputformat 1) + (mirror no) + (drillshape 1) + (scaleselection 1) + (outputdirectory "") + ) + ) + (net 0 "") + (net 1 "/GND") + (net 2 "/+12V") + (net 3 "/+3V3") + (net 4 "/+5V") + (net 5 "/+5V_REG") + (net 6 "/CC1") + (net 7 "/CC2") + (net 8 "/DRV_EN") + (net 9 "/DRV_VDD") + (net 10 "/DTR") + (net 11 "/EN") + (net 12 "/EXP_IO25") + (net 13 "/EXP_IO32") + (net 14 "/HALL") + (net 15 "/HALL_RAW") + (net 16 "/HOME") + (net 17 "/HOME_RAW") + (net 18 "/IO0") + (net 19 "/LED_BUF") + (net 20 "/LED_DATA") + (net 21 "/LED_DOUT") + (net 22 "/PWR_A") + (net 23 "/Q1B") + (net 24 "/Q2B") + (net 25 "/RTS") + (net 26 "/STAT") + (net 27 "/STAT_A") + (net 28 "/U0RXD") + (net 29 "/U0TXD") + (net 30 "/USB_DM") + (net 31 "/USB_DP") + (net 32 "/VBUS") + (net 33 "/VIN_FUSED") + (net 34 "/VIN_RAW") + (net 35 "/X_1A") + (net 36 "/X_1B") + (net 37 "/X_2A") + (net 38 "/X_2B") + (net 39 "/X_DIR") + (net 40 "/X_STEP") + (net 41 "/Y_1A") + (net 42 "/Y_1B") + (net 43 "/Y_2A") + (net 44 "/Y_2B") + (net 45 "/Y_DIR") + (net 46 "/Y_STEP") + (net 47 "unconnected-(J2-SBU1-PadA8)") + (net 48 "unconnected-(J2-SBU2-PadB8)") + (net 49 "unconnected-(U1-IO12-Pad14)") + (net 50 "unconnected-(U1-IO15-Pad23)") + (net 51 "unconnected-(U1-IO16-Pad27)") + (net 52 "unconnected-(U1-IO17-Pad28)") + (net 53 "unconnected-(U1-IO21-Pad33)") + (net 54 "unconnected-(U1-IO22-Pad36)") + (net 55 "unconnected-(U1-IO23-Pad37)") + (net 56 "unconnected-(U1-IO26-Pad11)") + (net 57 "unconnected-(U1-IO4-Pad26)") + (net 58 "unconnected-(U1-IO5-Pad29)") + (net 59 "unconnected-(U1-NC-Pad17)") + (net 60 "unconnected-(U1-NC-Pad18)") + (net 61 "unconnected-(U1-NC-Pad19)") + (net 62 "unconnected-(U1-NC-Pad20)") + (net 63 "unconnected-(U1-NC-Pad21)") + (net 64 "unconnected-(U1-NC-Pad22)") + (net 65 "unconnected-(U1-NC-Pad32)") + (net 66 "unconnected-(U1-SENSOR_VN-Pad5)") + (net 67 "unconnected-(U1-SENSOR_VP-Pad4)") + (net 68 "unconnected-(U2-NC-Pad7)") + (net 69 "unconnected-(U2-NC-Pad8)") + (net 70 "unconnected-(U2-R232-Pad15)") + (net 71 "unconnected-(U2-~{CTS}-Pad9)") + (net 72 "unconnected-(U2-~{DCD}-Pad12)") + (net 73 "unconnected-(U2-~{DSR}-Pad10)") + (net 74 "unconnected-(U2-~{RI}-Pad11)") + (footprint "Module:Pololu_Breakout-16_15.2x20.3mm" + (layer "F.Cu") + (uuid "4ae593ec-eccb-534f-8aad-1eacbc744a74") + (at 138.1 101.9 270) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8eee2878-e3b1-563e-b354-21ed2a2361c4") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Pololu Breakout 16-pin 15.2x20.3mm 0.6x0.8") + (tags "Pololu Breakout") + (property "Reference" "A1" + (at 6.35 -2.54 0) + (layer "F.SilkS") + (uuid "05ccdf2f-c4f0-4475-bcd9-f1ec554057f0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "DRV8825 StepStick (theta/spin)" + (at 6.35 20.17 0) + (layer "F.Fab") + (uuid "2e390c47-779d-4587-8c70-b24269f1c29f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "3974cd12-b625-4036-b7f0-95b74122f89f") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "a093d798-154d-4b3a-9c9d-27d0b0803a6e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -1.4 -1.4) + (end -1.4 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "9fd8924e-59be-4220-a4f0-8826996718c3") + ) + (fp_line + (start -1.4 1.27) + (end -1.4 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "ebba8f54-4f64-4ee3-83f7-542a3b4ce9ff") + ) + (fp_line + (start -1.4 19.18) + (end 14.1 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "1f01e891-6f4f-4dbc-a764-ed5fd2883408") + ) + (fp_line + (start 0 -1.4) + (end -1.4 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "888e952f-fd10-49c1-b504-52c23dad5a2e") + ) + (fp_line + (start 1.27 -1.4) + (end 1.27 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "84170ae6-30b0-4c7a-a047-8ffd9eac9d74") + ) + (fp_line + (start 1.27 1.27) + (end -1.4 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7cd939fe-f239-48b0-84b0-db4c73b495b0") + ) + (fp_line + (start 1.27 1.27) + (end 1.27 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "878a80d1-cd31-4ad5-b401-47da6eede999") + ) + (fp_line + (start 11.43 -1.4) + (end 11.43 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "721011f6-9bad-4233-8e51-f343d657ca00") + ) + (fp_line + (start 14.1 -1.4) + (end 1.27 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "759b5851-f0dc-4bf5-b98e-4fd9c1b2c87b") + ) + (fp_line + (start 14.1 19.18) + (end 14.1 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "15be6a81-38cd-48c0-a658-95ca1cf860cf") + ) + (fp_line + (start -1.27 0) + (end 0 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "29499d72-54e9-40d1-8791-5581662227be") + ) + (fp_line + (start -1.27 19.05) + (end -1.27 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "35af0296-2cb7-431b-8543-e8d68c22ab11") + ) + (fp_line + (start 0 -1.27) + (end 13.97 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3065d307-d27b-4459-a59d-4b98af61841d") + ) + (fp_line + (start 13.97 -1.27) + (end 13.97 19.05) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "41f5b452-4e42-4293-8e21-149fa3213f1c") + ) + (fp_line + (start 13.97 19.05) + (end -1.27 19.05) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b9869771-847d-40cc-8a79-af275c85fb38") + ) + (fp_text user "${REFERENCE}" + (at 6.35 0 0) + (layer "F.Fab") + (uuid "82866c8a-11ec-4480-b5f2-9f133ec9ac4c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "a5bf6fea-baf2-47b3-a4de-8b32482d1fec") + (net 1 "/GND") + (uuid "46ac1755-874b-5ba3-94df-7474e04fd254") + ) + (pad "2" thru_hole oval + (at 0 2.54 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "5fa27605-9535-40c5-8d2d-0036dbfbd977") + (net 9 "/DRV_VDD") + (uuid "5d31f506-4764-5c2c-9919-b495acfd363d") + ) + (pad "3" thru_hole oval + (at 0 5.08 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "567c6f9a-ceba-4996-baf1-d518b7cfc1b8") + (net 36 "/X_1B") + (uuid "be73d376-6dc6-5c5f-a19e-640336167223") + ) + (pad "4" thru_hole oval + (at 0 7.62 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "6ce49674-00e7-4943-a7d1-ce6de8f047bb") + (net 35 "/X_1A") + (uuid "6fcb89cb-a1c9-58a4-b596-2e2d7aa0536e") + ) + (pad "5" thru_hole oval + (at 0 10.16 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "e6577bf3-114f-40f7-9ba0-e5a48d073d09") + (net 37 "/X_2A") + (uuid "976e5c2e-503c-5a21-8b10-1d117f1779e4") + ) + (pad "6" thru_hole oval + (at 0 12.7 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "ea59663c-dd2b-49a4-aceb-928cd2103174") + (net 38 "/X_2B") + (uuid "6e425090-4359-5be3-93a1-666b8d6b19e5") + ) + (pad "7" thru_hole oval + (at 0 15.24 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "8c37b18a-4212-47fc-9def-1e1911f29a8f") + (net 1 "/GND") + (uuid "815e03db-ca54-55b2-a74a-fbaa85ebc817") + ) + (pad "8" thru_hole oval + (at 0 17.78 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "af5e149d-65b5-47d1-93a1-6f0bcce1e672") + (net 2 "/+12V") + (uuid "7f5e5559-65f0-5a76-9e9f-759505d897c5") + ) + (pad "9" thru_hole oval + (at 12.7 17.78 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "27a7cd1a-78f1-4fbd-ae91-3389acd852e1") + (net 8 "/DRV_EN") + (uuid "b7de2659-ae82-5d96-bcd2-312a72a83a2a") + ) + (pad "10" thru_hole oval + (at 12.7 15.24 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "f2c14cae-1d8f-41be-b78b-5954bdddae1b") + (net 3 "/+3V3") + (uuid "0267f676-128e-5c75-a151-f5892ae122bd") + ) + (pad "11" thru_hole oval + (at 12.7 12.7 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "10776c48-2eaa-431b-8de2-6a3291f4f0f7") + (net 3 "/+3V3") + (uuid "b4205c84-e1cf-59a2-8be2-ccb48524cb3f") + ) + (pad "12" thru_hole oval + (at 12.7 10.16 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "51b86555-2619-45da-af9c-4c0e580657fc") + (net 3 "/+3V3") + (uuid "945c1e56-2f52-584a-8f4e-7196f2fa2a15") + ) + (pad "13" thru_hole oval + (at 12.7 7.62 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "0fced33b-9b6c-410b-b200-84a860f57f4a") + (net 3 "/+3V3") + (uuid "9b9adc60-1c4c-5cb1-aee2-bbb690595dd8") + ) + (pad "14" thru_hole oval + (at 12.7 5.08 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "c95ddd35-51ec-4578-826e-0e9625e86489") + (net 3 "/+3V3") + (uuid "ede8b2d5-7b56-504b-8703-1e3c499336ae") + ) + (pad "15" thru_hole oval + (at 12.7 2.54 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "1cef4470-7a63-4408-bfdd-2738afea9d7d") + (net 40 "/X_STEP") + (uuid "7bd7855d-966b-5e86-b190-fe9d24a197c1") + ) + (pad "16" thru_hole oval + (at 12.7 0 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "de170945-c365-417e-bd94-f8aafba2aa2a") + (net 39 "/X_DIR") + (uuid "030b34ec-07a8-5ab1-9239-28bb0034fc44") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Module.3dshapes/Pololu_Breakout-16_15.2x20.3mm.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (fp_rect + (start -1.53 -1.52) + (end 1.53 19.3) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "1d1c21be-e381-5cc5-8c17-809d79dca906") + ) + (fp_rect + (start 11.17 -1.52) + (end 14.21 19.3) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "3fd6b5c3-707f-5a01-864f-35f501f2e398") + ) + (path "/b3bed31e-4ebe-57b0-8327-9f8ac130ab57") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Module:Pololu_Breakout-16_15.2x20.3mm" + (layer "F.Cu") + (uuid "798a2a26-60f9-5470-9285-04eb2ef74b0b") + (at 159.1 101.9 270) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bcc2a2c6-1471-5270-8aba-1f848dc9c8f5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Pololu Breakout 16-pin 15.2x20.3mm 0.6x0.8") + (tags "Pololu Breakout") + (property "Reference" "A2" + (at 6.35 -2.54 0) + (layer "F.SilkS") + (uuid "05ccdf2f-c4f0-4475-bcd9-f1ec554057f0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "DRV8825 StepStick (rho/arm)" + (at 6.35 20.17 0) + (layer "F.Fab") + (uuid "2e390c47-779d-4587-8c70-b24269f1c29f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "3974cd12-b625-4036-b7f0-95b74122f89f") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "a093d798-154d-4b3a-9c9d-27d0b0803a6e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -1.4 -1.4) + (end -1.4 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "9fd8924e-59be-4220-a4f0-8826996718c3") + ) + (fp_line + (start -1.4 1.27) + (end -1.4 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "ebba8f54-4f64-4ee3-83f7-542a3b4ce9ff") + ) + (fp_line + (start -1.4 19.18) + (end 14.1 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "1f01e891-6f4f-4dbc-a764-ed5fd2883408") + ) + (fp_line + (start 0 -1.4) + (end -1.4 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "888e952f-fd10-49c1-b504-52c23dad5a2e") + ) + (fp_line + (start 1.27 -1.4) + (end 1.27 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "84170ae6-30b0-4c7a-a047-8ffd9eac9d74") + ) + (fp_line + (start 1.27 1.27) + (end -1.4 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7cd939fe-f239-48b0-84b0-db4c73b495b0") + ) + (fp_line + (start 1.27 1.27) + (end 1.27 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "878a80d1-cd31-4ad5-b401-47da6eede999") + ) + (fp_line + (start 11.43 -1.4) + (end 11.43 19.18) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "721011f6-9bad-4233-8e51-f343d657ca00") + ) + (fp_line + (start 14.1 -1.4) + (end 1.27 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "759b5851-f0dc-4bf5-b98e-4fd9c1b2c87b") + ) + (fp_line + (start 14.1 19.18) + (end 14.1 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "15be6a81-38cd-48c0-a658-95ca1cf860cf") + ) + (fp_line + (start -1.27 0) + (end 0 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "29499d72-54e9-40d1-8791-5581662227be") + ) + (fp_line + (start -1.27 19.05) + (end -1.27 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "35af0296-2cb7-431b-8543-e8d68c22ab11") + ) + (fp_line + (start 0 -1.27) + (end 13.97 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3065d307-d27b-4459-a59d-4b98af61841d") + ) + (fp_line + (start 13.97 -1.27) + (end 13.97 19.05) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "41f5b452-4e42-4293-8e21-149fa3213f1c") + ) + (fp_line + (start 13.97 19.05) + (end -1.27 19.05) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b9869771-847d-40cc-8a79-af275c85fb38") + ) + (fp_text user "${REFERENCE}" + (at 6.35 0 0) + (layer "F.Fab") + (uuid "82866c8a-11ec-4480-b5f2-9f133ec9ac4c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "a5bf6fea-baf2-47b3-a4de-8b32482d1fec") + (net 1 "/GND") + (uuid "e6a68a71-7689-5fd4-b4ff-b125e048a388") + ) + (pad "2" thru_hole oval + (at 0 2.54 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "5fa27605-9535-40c5-8d2d-0036dbfbd977") + (net 9 "/DRV_VDD") + (uuid "ae861326-1082-536e-9aae-ab810a0f5ef3") + ) + (pad "3" thru_hole oval + (at 0 5.08 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "567c6f9a-ceba-4996-baf1-d518b7cfc1b8") + (net 42 "/Y_1B") + (uuid "a6bb68ea-9c4f-51e4-9ae7-8cb786e5351e") + ) + (pad "4" thru_hole oval + (at 0 7.62 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "6ce49674-00e7-4943-a7d1-ce6de8f047bb") + (net 41 "/Y_1A") + (uuid "a972d730-23c7-5f70-9469-1ed7edbb7627") + ) + (pad "5" thru_hole oval + (at 0 10.16 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "e6577bf3-114f-40f7-9ba0-e5a48d073d09") + (net 43 "/Y_2A") + (uuid "e95cf71d-122b-511b-87fc-c987a21e02eb") + ) + (pad "6" thru_hole oval + (at 0 12.7 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "ea59663c-dd2b-49a4-aceb-928cd2103174") + (net 44 "/Y_2B") + (uuid "85e67c7d-8217-529b-bbc5-d5a214facb60") + ) + (pad "7" thru_hole oval + (at 0 15.24 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "8c37b18a-4212-47fc-9def-1e1911f29a8f") + (net 1 "/GND") + (uuid "1be548a6-ff01-56f7-a112-347ea2086e33") + ) + (pad "8" thru_hole oval + (at 0 17.78 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "af5e149d-65b5-47d1-93a1-6f0bcce1e672") + (net 2 "/+12V") + (uuid "da95ad5c-f21c-552d-8c57-de5ff6151de1") + ) + (pad "9" thru_hole oval + (at 12.7 17.78 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "27a7cd1a-78f1-4fbd-ae91-3389acd852e1") + (net 8 "/DRV_EN") + (uuid "12418b60-925f-5602-9465-57556cb17100") + ) + (pad "10" thru_hole oval + (at 12.7 15.24 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "f2c14cae-1d8f-41be-b78b-5954bdddae1b") + (net 3 "/+3V3") + (uuid "ee443ee9-0e73-5697-a408-7bed310a8c20") + ) + (pad "11" thru_hole oval + (at 12.7 12.7 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "10776c48-2eaa-431b-8de2-6a3291f4f0f7") + (net 3 "/+3V3") + (uuid "a98c3f59-9ade-582c-8afd-8153bfd9d1af") + ) + (pad "12" thru_hole oval + (at 12.7 10.16 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "51b86555-2619-45da-af9c-4c0e580657fc") + (net 3 "/+3V3") + (uuid "a9a1b86b-2725-5fc3-bcca-6468c5b442b5") + ) + (pad "13" thru_hole oval + (at 12.7 7.62 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "0fced33b-9b6c-410b-b200-84a860f57f4a") + (net 3 "/+3V3") + (uuid "767b2ef1-f35c-5bec-8ce1-78487848b3ef") + ) + (pad "14" thru_hole oval + (at 12.7 5.08 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "c95ddd35-51ec-4578-826e-0e9625e86489") + (net 3 "/+3V3") + (uuid "624494b6-a629-5f93-9000-73ad80bd3fd6") + ) + (pad "15" thru_hole oval + (at 12.7 2.54 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "1cef4470-7a63-4408-bfdd-2738afea9d7d") + (net 46 "/Y_STEP") + (uuid "b2de5a2b-f1ac-5a67-828d-2290bc6a186c") + ) + (pad "16" thru_hole oval + (at 12.7 0 270) + (size 1.6 1.6) + (drill 0.8) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "de170945-c365-417e-bd94-f8aafba2aa2a") + (net 45 "/Y_DIR") + (uuid "30cced1e-7a4f-59a9-8dfc-874f03f1f688") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Module.3dshapes/Pololu_Breakout-16_15.2x20.3mm.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (fp_rect + (start -1.53 -1.52) + (end 1.53 19.3) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "5712b9c9-8464-52b7-8fd6-c94ba1511e16") + ) + (fp_rect + (start 11.17 -1.52) + (end 14.21 19.3) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "8089b9dd-5303-5f2a-9ce8-38426b90926f") + ) + (path "/1a7133b1-be90-5e2d-be8e-8b3325c622d3") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:CP_Elec_8x10" + (layer "F.Cu") + (uuid "198db8a8-e023-5c12-9103-1cb3f901fe55") + (at 124 121) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "04605543-01f6-573d-aeb2-d96d6eff8320") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SMD capacitor, aluminum electrolytic, Nichicon, 8.0x10mm") + (tags "capacitor electrolytic") + (property "Reference" "C1" + (uuid "faa0c7f3-5e06-5c00-a064-5522e09a4480") + (at 0 -5.2 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "100uF 25V" + (uuid "2d82fd04-aeb5-5a4e-bd2c-96bcb254f4d4") + (at 0 5.2 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -5.5 -2.51) + (end -4.5 -2.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -5 -3.01) + (end -5 -2.01) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 -3.195563) + (end -4.26 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 -3.195563) + (end -3.195563 -4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 3.195563) + (end -4.26 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 3.195563) + (end -3.195563 4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.195563 -4.26) + (end 4.26 -4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.195563 4.26) + (end 4.26 4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 4.26 -4.26) + (end 4.26 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 4.26 4.26) + (end 4.26 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -5.25 -1.5) + (end -5.25 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -5.25 1.5) + (end -4.4 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -3.25) + (end -4.4 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -3.25) + (end -3.25 -4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -1.5) + (end -5.25 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 1.5) + (end -4.4 3.25) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 3.25) + (end -3.25 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.25 -4.4) + (end 4.4 -4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.25 4.4) + (end 4.4 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 -4.4) + (end 4.4 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 -1.5) + (end 5.25 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 1.5) + (end 4.4 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 5.25 -1.5) + (end 5.25 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 5.25 1.5) + (end 4.4 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.15 -3.15) + (end -4.15 3.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -4.15 -3.15) + (end -3.15 -4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -4.15 3.15) + (end -3.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.562278 -1.5) + (end -2.762278 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.162278 -1.9) + (end -3.162278 -1.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.15 -4.15) + (end 4.15 -4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.15 4.15) + (end 4.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 4.15 -4.15) + (end 4.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_circle + (center 0 0) + (end 4 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -3.25 0) + (size 3.5 2.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1) + (net 2 "/+12V") + (uuid "3a4b5304-1b31-51e7-8fb2-cc61e381f52e") + ) + (pad "2" smd roundrect + (at 3.25 0) + (size 3.5 2.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1) + (net 1 "/GND") + (uuid "2380ede0-abf3-55bc-b06c-2ddea4be5f4f") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/6e1bc80c-cb62-5987-b5d6-eac62ab087e5") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "2a991bf7-1043-5da7-a4d4-d96f12af763e") + (at 155 155 90) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e7cd7544-0c81-5687-b42e-a5059255cac2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C10" + (uuid "7780bc9f-3a55-5321-8ec7-cfd92f69763e") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "d07e6b77-0879-5152-86c4-a7829098454b") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "f71fc3e2-60eb-5f48-a4b8-0bb66122b10b") + ) + (pad "2" smd roundrect + (at 0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "b3b5c855-ad02-5595-a8f9-dd26555caf54") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/eef2da2b-6409-51d5-a615-8a0b429293e3") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "a84c6ef3-402b-51e4-8b98-774a5a0abf9a") + (at 161 118.5) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f0725150-b74d-576c-b411-d3cfdb399929") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C13" + (uuid "06ac2f3f-992a-5cd8-b585-ea13e2c82f4c") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "c6ff36a4-8758-5b1d-8ffe-d1428a8f80bd") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 16 "/HOME") + (uuid "a69e994a-bf03-5671-ae26-3c65e2e18d8c") + ) + (pad "2" smd roundrect + (at 0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "576e416f-e6a3-591f-970b-1e1f76a3b87d") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/00db1c8e-91ac-582c-bc84-a655be0745b8") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "3573c0b9-e336-5058-9919-393390c79c28") + (at 161 120.7) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "01f70323-4307-595c-bcc7-b33eaede7ea5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C14" + (uuid "280ecafc-cfba-5d4d-8863-2b5dce4d2d07") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "4b2c965d-d9ea-5730-a9d7-7fb16d601509") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 14 "/HALL") + (uuid "bef1f21b-50b5-59a2-b9df-8b31eb07cc9d") + ) + (pad "2" smd roundrect + (at 0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "1eed937c-e84a-5354-9646-bdb398980887") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/5ebd8202-e921-5da6-b535-685eaf6f1d8e") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "47bfb66c-dde9-58c1-8673-c81d4af0cee3") + (at 161 130 90) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "3b1d0a5f-5865-52ff-8df9-1aeee6f29a56") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C15" + (uuid "9b561f91-9e9b-5f7a-8683-1c7f51439931") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "86a756a8-24f6-5a18-9ea5-dd13664c9bfd") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 4 "/+5V") + (uuid "fed9be4a-10bc-5126-88cf-cbed94821b55") + ) + (pad "2" smd roundrect + (at 0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "cc2b3687-383a-5c8a-89c0-7d03c7f884f0") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/25fb3a75-18c1-52bc-bf72-56c946150f28") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_1206_3216Metric" + (layer "F.Cu") + (uuid "e1962789-8c42-5659-910c-e803f981695b") + (at 121.8 105.4) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "df4b7897-6cf3-5425-844f-fcc28f4f2824") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C16" + (uuid "f03c9261-7b1b-5a16-b8f1-acb9c6b65e7e") + (at 3.6 0 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF 50V" + (uuid "8cb1fae8-086d-5996-8b70-ba0529ee8c14") + (at 0 1.85 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.711252 -0.91) + (end 0.711252 -0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.711252 0.91) + (end 0.711252 0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.3 -1.15) + (end 2.3 1.15) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1.6 -0.8) + (end 1.6 0.8) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (pad "1" smd roundrect + (at -1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 2 "/+12V") + (uuid "c03e6256-03b5-55f6-aa43-524212442a80") + ) + (pad "2" smd roundrect + (at 1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 1 "/GND") + (uuid "15bdef03-d4e4-5b78-9189-c782c105f34e") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d6e7af3b-8b93-532c-84b6-23547c0607c6") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_1206_3216Metric" + (layer "F.Cu") + (uuid "8475c421-88b3-53d9-a62e-6cb076280a56") + (at 142.8 105.4) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "2ff7cd8a-3c87-530c-8f11-09f22444a25f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C17" + (uuid "2561f6d5-c63f-59ce-af9d-a277583b4b7a") + (at 3.6 0 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF 50V" + (uuid "4726a6f0-d28f-5296-90ae-f12de26d5031") + (at 0 1.85 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.711252 -0.91) + (end 0.711252 -0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.711252 0.91) + (end 0.711252 0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.3 -1.15) + (end 2.3 1.15) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1.6 -0.8) + (end 1.6 0.8) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (pad "1" smd roundrect + (at -1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 2 "/+12V") + (uuid "eacbedb2-3b25-5540-8af8-d17ea963abf7") + ) + (pad "2" smd roundrect + (at 1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 1 "/GND") + (uuid "f921f3eb-65e2-5ea1-bfd9-ebe916b43b85") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/50f337b3-2ce0-544e-9e89-0cd24dd4570d") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:CP_Elec_8x10" + (layer "F.Cu") + (uuid "2cde9fe5-e266-57d3-820a-aea7371bbdb0") + (at 145.5 121) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "c8d7ac01-5ef9-5341-a702-8d715eddfd87") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SMD capacitor, aluminum electrolytic, Nichicon, 8.0x10mm") + (tags "capacitor electrolytic") + (property "Reference" "C2" + (uuid "4d7a4c1d-b5e2-5a88-89bf-168039c34493") + (at 0 -5.2 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "100uF 25V" + (uuid "06ce39d8-182d-5f1e-bcc3-7fe5588375bd") + (at 0 5.2 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -5.5 -2.51) + (end -4.5 -2.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -5 -3.01) + (end -5 -2.01) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 -3.195563) + (end -4.26 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 -3.195563) + (end -3.195563 -4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 3.195563) + (end -4.26 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -4.26 3.195563) + (end -3.195563 4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.195563 -4.26) + (end 4.26 -4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.195563 4.26) + (end 4.26 4.26) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 4.26 -4.26) + (end 4.26 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 4.26 4.26) + (end 4.26 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -5.25 -1.5) + (end -5.25 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -5.25 1.5) + (end -4.4 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -3.25) + (end -4.4 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -3.25) + (end -3.25 -4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 -1.5) + (end -5.25 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 1.5) + (end -4.4 3.25) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.4 3.25) + (end -3.25 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.25 -4.4) + (end 4.4 -4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.25 4.4) + (end 4.4 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 -4.4) + (end 4.4 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 -1.5) + (end 5.25 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 4.4 1.5) + (end 4.4 4.4) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 5.25 -1.5) + (end 5.25 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 5.25 1.5) + (end 4.4 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -4.15 -3.15) + (end -4.15 3.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -4.15 -3.15) + (end -3.15 -4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -4.15 3.15) + (end -3.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.562278 -1.5) + (end -2.762278 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.162278 -1.9) + (end -3.162278 -1.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.15 -4.15) + (end 4.15 -4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.15 4.15) + (end 4.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 4.15 -4.15) + (end 4.15 4.15) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_circle + (center 0 0) + (end 4 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -3.25 0) + (size 3.5 2.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1) + (net 2 "/+12V") + (uuid "ab8e16d9-dbf7-52f7-afaa-961b90c82c6e") + ) + (pad "2" smd roundrect + (at 3.25 0) + (size 3.5 2.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1) + (net 1 "/GND") + (uuid "cdb56614-350b-5d7e-ae0b-bbf1978b7214") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/94674d34-a062-5d75-9308-274f6e8ac33e") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_1206_3216Metric" + (layer "F.Cu") + (uuid "cccc68f1-0cbd-51eb-9d73-5875dfb9bb80") + (at 120.5 139.6) + (property "LCSC" "C13585" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "39789304-dfde-584e-b1ef-0ff7ad818e1d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C3" + (uuid "c190275b-271a-519f-a8e4-0143daa6fd38") + (at 0 -1.85 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF 25V" + (uuid "ec7d005d-bd02-5251-9ca1-f7e9d06b1e10") + (at 0 1.85 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.711252 -0.91) + (end 0.711252 -0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.711252 0.91) + (end 0.711252 0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.3 -1.15) + (end 2.3 1.15) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1.6 -0.8) + (end 1.6 0.8) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (pad "1" smd roundrect + (at -1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 2 "/+12V") + (uuid "c414e767-f891-5646-821b-33f2a81868af") + ) + (pad "2" smd roundrect + (at 1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 1 "/GND") + (uuid "edddac33-b2c3-5314-b9ef-9f31fa182808") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d8c84f00-0c2b-57fe-925d-6813a5c4e8cf") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_1206_3216Metric" + (layer "F.Cu") + (uuid "d313bea1-0653-54f8-a2ac-8a4a113a7032") + (at 126 139.6) + (property "LCSC" "C13585" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "1113b88b-0bed-540e-a8e3-b87412989d19") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C4" + (uuid "84d1440a-73b3-5b7f-b9cc-7dc8d685f32f") + (at 0 -1.85 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF 16V" + (uuid "2a2d7801-73d5-5044-8e31-d1d0c0956642") + (at 0 1.85 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.711252 -0.91) + (end 0.711252 -0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.711252 0.91) + (end 0.711252 0.91) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.3 -1.15) + (end 2.3 1.15) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1.6 -0.8) + (end 1.6 0.8) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (pad "1" smd roundrect + (at -1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 5 "/+5V_REG") + (uuid "ad2ff147-0071-5bb8-86c4-097de64fdf49") + ) + (pad "2" smd roundrect + (at 1.475 0) + (size 1.15 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.217391) + (net 1 "/GND") + (uuid "47dd160b-004e-5ed3-9264-57c02b3365bb") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/a962269d-1c75-523f-beb6-0da18c5d2f18") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0805_2012Metric" + (layer "F.Cu") + (uuid "63297324-fc3a-5fdc-809c-5545237c1f10") + (at 159.6 144 90) + (property "LCSC" "C15850" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ed7642f1-51e0-5f56-8485-70dbf525bec1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C5" + (uuid "2c70401e-d42a-54a0-aa82-5b7ee8fc6b23") + (at 0 -1.68 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF" + (uuid "5864a8e5-fc38-5699-b2f1-36077cf64b9b") + (at 0 1.68 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.261252 -0.735) + (end 0.261252 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.261252 0.735) + (end 0.261252 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.7 -0.98) + (end 1.7 0.98) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1 -0.625) + (end 1 0.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.5 0.5) + (thickness 0.08) + ) + ) + ) + (pad "1" smd roundrect + (at -0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 4 "/+5V") + (uuid "69384807-cc90-5805-9e8e-d32f72a7287f") + ) + (pad "2" smd roundrect + (at 0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "37656d2d-2a29-50cc-8f81-3a33a668d4e3") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/f5d22db1-0d75-58c3-aa8d-cdfad0b729e2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0805_2012Metric" + (layer "F.Cu") + (uuid "f4c0d708-be5a-535f-a8b2-02688c5dea9a") + (at 159.6 139.5 90) + (property "LCSC" "C45783" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "6e8f852d-281b-572b-9735-53c619b21716") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C6" + (uuid "1172212d-637e-510f-88f9-492c144b9439") + (at 0 -1.68 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "22uF" + (uuid "cffe7c51-fd0b-5e83-bbaf-afdfb5fcf54f") + (at 0 1.68 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.261252 -0.735) + (end 0.261252 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.261252 0.735) + (end 0.261252 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.7 -0.98) + (end 1.7 0.98) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1 -0.625) + (end 1 0.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.5 0.5) + (thickness 0.08) + ) + ) + ) + (pad "1" smd roundrect + (at -0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "d6cdffb3-868a-5612-b27a-8da6c5e7459f") + ) + (pad "2" smd roundrect + (at 0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "917390b9-1417-5d6b-a3bc-2fa23241293a") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/8db23ce3-3324-5a54-995d-c8e3d38448e2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "90ce0294-808c-5fbf-bd0e-f693e9492f53") + (at 127 143 90) + (property "LCSC" "C14663" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "869f8f68-c756-534e-b906-d0cf2f0f7dd2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C7" + (uuid "a496f552-a6fd-5cff-9597-930f412e723d") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "100nF" + (uuid "cf2afce2-3ab8-5fd7-b81d-21af98259ed9") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "211967dd-8c4d-5cae-ab6c-c5560d06e6a9") + ) + (pad "2" smd roundrect + (at 0.775 0 90) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "5569207e-2272-513d-8137-7d57413cdd7f") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/b44c0a62-31e7-5f22-b0c2-204702902245") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0603_1608Metric" + (layer "F.Cu") + (uuid "6de7e892-ddd8-532e-a6d4-253a451b5c85") + (at 154.6 152.7) + (property "LCSC" "C15849" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "daf7529b-5249-5b08-8dc4-85fa0ffb295f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C8" + (uuid "c6059a67-1793-5970-8c37-5e867cdbe5c3") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1uF" + (uuid "66323709-8729-5efe-b8f2-b5b6bd92d787") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.14058 -0.51) + (end 0.14058 -0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.14058 0.51) + (end 0.14058 0.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 11 "/EN") + (uuid "775fcb88-03ce-5d6c-bd0f-2f2104723f4e") + ) + (pad "2" smd roundrect + (at 0.775 0) + (size 0.9 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "8cc16537-7428-5b02-bb3f-aa8e1062d347") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/18cbfacf-9548-5796-88c0-04204a991c37") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Capacitor_SMD:C_0805_2012Metric" + (layer "F.Cu") + (uuid "69ff356d-ad0e-5160-aa9a-920c50f80cd2") + (at 157.5 154.6 90) + (property "LCSC" "C15850" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f50487ce-6cc7-5917-a5be-2f874e379164") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Reference" "C9" + (uuid "98919885-e225-5a87-ae38-f174769f865d") + (at 0 -1.68 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10uF" + (uuid "3c8b9c96-bce5-5006-8acd-87fd50b73c25") + (at 0 1.68 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.261252 -0.735) + (end 0.261252 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.261252 0.735) + (end 0.261252 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.7 -0.98) + (end 1.7 0.98) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -1 -0.625) + (end 1 0.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.5 0.5) + (thickness 0.08) + ) + ) + ) + (pad "1" smd roundrect + (at -0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "8c4a35ec-8acd-585d-a835-1015eebdf1eb") + ) + (pad "2" smd roundrect + (at 0.95 0 90) + (size 1 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "4ec8ddcb-3fe4-5b33-8bf8-18a53cf0a9e9") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/8f9eda86-de49-5f22-8d1d-1eec8a8e48d3") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Diode_SMD:D_SMA" + (layer "F.Cu") + (uuid "feea4a78-723d-524f-a904-88a2d3f5d217") + (at 116 122 90) + (property "LCSC" "C8678" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bb876cdb-8a7d-5f2f-9125-90be42b6a57d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Diode SMA (DO-214AC)") + (tags "Diode SMA (DO-214AC)") + (property "Reference" "D1" + (at 0 -2.5 0) + (layer "F.SilkS") + (uuid "78f18f7d-f8a5-43e4-98c1-400155beaace") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "SS34" + (at 0 2.6 0) + (layer "F.Fab") + (uuid "d8100462-8cef-473f-be33-7f843be6851c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "c4278de3-51d4-45cb-b37b-42a667e66bc5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 90) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "aa802e2b-7add-4e63-bcb2-5328ca681d3d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -3.51 -1.65) + (end -3.51 1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412") + ) + (fp_line + (start -3.51 -1.65) + (end 2 -1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307") + ) + (fp_line + (start -3.51 1.65) + (end 2 1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "dff34e10-67ca-4b77-95c8-838244782165") + ) + (fp_line + (start -3.5 -1.75) + (end 3.5 -1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837") + ) + (fp_line + (start -3.5 1.75) + (end -3.5 -1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2dd2626e-6f74-400d-9266-48b047137055") + ) + (fp_line + (start 3.5 -1.75) + (end 3.5 1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4ca79e24-2e7b-47bd-871d-fec997d695df") + ) + (fp_line + (start 3.5 1.75) + (end -3.5 1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d08df98a-2ea9-4491-a654-062a8028f290") + ) + (fp_line + (start -2.3 1.5) + (end -2.3 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5") + ) + (fp_line + (start -0.64944 -0.79908) + (end -0.64944 0.80112) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0f99da12-e271-4d4a-8797-6ea6343d195d") + ) + (fp_line + (start -0.64944 0.00102) + (end -1.55114 0.00102) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361") + ) + (fp_line + (start -0.64944 0.00102) + (end 0.50118 -0.79908) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa") + ) + (fp_line + (start -0.64944 0.00102) + (end 0.50118 0.75032) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d55225e2-3236-4507-bfd9-80a48f293c40") + ) + (fp_line + (start 0.50118 0.00102) + (end 1.4994 0.00102) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "46fe74cf-81ca-444c-a727-666d0e34a994") + ) + (fp_line + (start 0.50118 0.75032) + (end 0.50118 -0.79908) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7c1208d5-7637-4920-8943-369f975b8a74") + ) + (fp_line + (start 2.3 -1.5) + (end -2.3 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032") + ) + (fp_line + (start 2.3 -1.5) + (end 2.3 1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d13e07f1-e4fe-4d02-b51c-871844057f50") + ) + (fp_line + (start 2.3 1.5) + (end -2.3 1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f849bb85-eee3-44d9-b881-7f1627d4304a") + ) + (fp_text user "${REFERENCE}" + (at 0 -2.5 0) + (layer "F.Fab") + (uuid "84118230-d2f4-4bb3-819b-e1cb088384b6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -2 0 90) + (size 2.5 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1388888889) + (uuid "e092a9e8-b915-4f8c-82db-96bdde4366ac") + (net 2 "/+12V") + (uuid "d6d98eda-2c45-5431-b5b2-57501409207f") + ) + (pad "2" smd roundrect + (at 2 0 90) + (size 2.5 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1388888889) + (uuid "7c00314a-7875-4f2e-ac99-32554d25fcd6") + (net 33 "/VIN_FUSED") + (uuid "9a8bef7d-d4d0-543f-bee7-cf36ba4c80c4") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/e6f704cd-1a92-526e-8a4f-3b691b41894f") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Diode_SMD:D_SMA" + (layer "F.Cu") + (uuid "e6a2fc38-1328-59f8-be21-ea939d93f729") + (at 128.87 133 90) + (property "LCSC" "C8678" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "508b9d2d-cdcc-5f5c-921f-03545412ee17") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Diode SMA (DO-214AC)") + (tags "Diode SMA (DO-214AC)") + (property "Reference" "D2" + (at 0 -2.5 0) + (layer "F.SilkS") + (uuid "78f18f7d-f8a5-43e4-98c1-400155beaace") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "SS34" + (at 0 2.6 0) + (layer "F.Fab") + (uuid "d8100462-8cef-473f-be33-7f843be6851c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "c4278de3-51d4-45cb-b37b-42a667e66bc5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 90) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "aa802e2b-7add-4e63-bcb2-5328ca681d3d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -3.51 -1.65) + (end -3.51 1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412") + ) + (fp_line + (start -3.51 -1.65) + (end 2 -1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307") + ) + (fp_line + (start -3.51 1.65) + (end 2 1.65) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "dff34e10-67ca-4b77-95c8-838244782165") + ) + (fp_line + (start -3.5 -1.75) + (end 3.5 -1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837") + ) + (fp_line + (start -3.5 1.75) + (end -3.5 -1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2dd2626e-6f74-400d-9266-48b047137055") + ) + (fp_line + (start 3.5 -1.75) + (end 3.5 1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4ca79e24-2e7b-47bd-871d-fec997d695df") + ) + (fp_line + (start 3.5 1.75) + (end -3.5 1.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d08df98a-2ea9-4491-a654-062a8028f290") + ) + (fp_line + (start -2.3 1.5) + (end -2.3 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5") + ) + (fp_line + (start -0.64944 -0.79908) + (end -0.64944 0.80112) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0f99da12-e271-4d4a-8797-6ea6343d195d") + ) + (fp_line + (start -0.64944 0.00102) + (end -1.55114 0.00102) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361") + ) + (fp_line + (start -0.64944 0.00102) + (end 0.50118 -0.79908) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa") + ) + (fp_line + (start -0.64944 0.00102) + (end 0.50118 0.75032) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d55225e2-3236-4507-bfd9-80a48f293c40") + ) + (fp_line + (start 0.50118 0.00102) + (end 1.4994 0.00102) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "46fe74cf-81ca-444c-a727-666d0e34a994") + ) + (fp_line + (start 0.50118 0.75032) + (end 0.50118 -0.79908) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7c1208d5-7637-4920-8943-369f975b8a74") + ) + (fp_line + (start 2.3 -1.5) + (end -2.3 -1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032") + ) + (fp_line + (start 2.3 -1.5) + (end 2.3 1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d13e07f1-e4fe-4d02-b51c-871844057f50") + ) + (fp_line + (start 2.3 1.5) + (end -2.3 1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f849bb85-eee3-44d9-b881-7f1627d4304a") + ) + (fp_text user "${REFERENCE}" + (at 0 -2.5 0) + (layer "F.Fab") + (uuid "84118230-d2f4-4bb3-819b-e1cb088384b6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -2 0 90) + (size 2.5 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1388888889) + (uuid "e092a9e8-b915-4f8c-82db-96bdde4366ac") + (net 4 "/+5V") + (uuid "77df0d91-0317-58e6-981a-7e0663d30110") + ) + (pad "2" smd roundrect + (at 2 0 90) + (size 2.5 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.1388888889) + (uuid "7c00314a-7875-4f2e-ac99-32554d25fcd6") + (net 5 "/+5V_REG") + (uuid "713c33cd-3936-5d29-9f8c-a9be59638380") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d00f60b7-51dd-51c1-bd90-f02a1bdf4114") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Diode_SMD:D_SOD-123" + (layer "F.Cu") + (uuid "08a18818-4d2e-52a8-ac2e-4fe964ce1571") + (at 113 139.8) + (property "LCSC" "C8598" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "b4ee2e91-f163-59e8-9509-9b6338806a33") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOD-123") + (tags "SOD-123") + (property "Reference" "D3" + (at 0 -2 0) + (layer "F.SilkS") + (uuid "5c813cbc-84b5-45a4-a0aa-35d3573110db") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "B5819W" + (at 0 2.1 0) + (layer "F.Fab") + (uuid "12459980-93ec-4d14-a5d8-25465bd8b01f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "9df2fb6c-9a01-450c-8dda-024b1c6ddfcc") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "434b35bb-86e7-4a80-b86a-8dfd526da733") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -2.36 -1) + (end -2.36 1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "de699020-a29a-4525-a22d-28ad5ded289c") + ) + (fp_line + (start -2.36 -1) + (end 1.65 -1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e1b647a2-f10b-41c9-a10d-290cc557cf1b") + ) + (fp_line + (start -2.36 1) + (end 1.65 1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "bb8e1113-3a33-4b8a-8d4d-dc28453c23b3") + ) + (fp_line + (start -2.35 -1.15) + (end -2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f234f584-a276-4f4c-b983-7f290a1e5747") + ) + (fp_line + (start -2.35 -1.15) + (end 2.35 -1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4aacff46-a0e4-4a7e-adc9-4cb9bcd268bd") + ) + (fp_line + (start 2.35 -1.15) + (end 2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f57b8828-8e33-4d6a-ba4b-817e53acd1da") + ) + (fp_line + (start 2.35 1.15) + (end -2.35 1.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "277b3168-086d-4feb-9ab8-026e88452a58") + ) + (fp_line + (start -1.4 -0.9) + (end 1.4 -0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "4ad4e92b-9b64-4eed-8c4b-d96097a88e61") + ) + (fp_line + (start -1.4 0.9) + (end -1.4 -0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "1ac565ca-970b-44d3-9087-59b04ab60eae") + ) + (fp_line + (start -0.75 0) + (end -0.35 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "46dc275b-0899-4d0d-8713-b622e0c22f0e") + ) + (fp_line + (start -0.35 0) + (end -0.35 -0.55) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9b27c55d-1944-4b36-b982-eb719a46d948") + ) + (fp_line + (start -0.35 0) + (end -0.35 0.55) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "68f6cd3c-fdce-44a9-af86-78cf47501eda") + ) + (fp_line + (start -0.35 0) + (end 0.25 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e7535fdf-c98f-460e-b3e7-c5c3c78dc09f") + ) + (fp_line + (start 0.25 -0.4) + (end 0.25 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "00b1df15-efaf-4389-b1a8-f9ec8af76c39") + ) + (fp_line + (start 0.25 0) + (end 0.75 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "44d78e10-5c1c-4284-ba9c-163e5208ec30") + ) + (fp_line + (start 0.25 0.4) + (end -0.35 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c82b3165-5533-40f3-a703-e13e1a64873f") + ) + (fp_line + (start 1.4 -0.9) + (end 1.4 0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c36e9a65-0388-45d7-9b3b-1648a22d40d4") + ) + (fp_line + (start 1.4 0.9) + (end -1.4 0.9) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3ea8d381-2884-4493-a631-0d00c072c3e5") + ) + (fp_text user "${REFERENCE}" + (at 0 -2 0) + (layer "F.Fab") + (uuid "4ef1dce9-e176-4a2e-8fb0-c36ec2740b29") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -1.65 0) + (size 0.9 1.2) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "8ca7cf40-9887-436c-bea9-a303f4626eef") + (net 4 "/+5V") + (uuid "578aa616-263f-56ca-b5d7-e60ac3cd383a") + ) + (pad "2" smd roundrect + (at 1.65 0) + (size 0.9 1.2) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "6df6f7bc-2215-4f91-8920-244285a2df55") + (net 32 "/VBUS") + (uuid "3634550f-f1ce-51a4-81b4-aca04a904a2b") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/dfd2dfe3-ff53-5171-b30b-1664ef15efba") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "LED_SMD:LED_0603_1608Metric" + (layer "F.Cu") + (uuid "96427fbd-f798-5b8b-992e-f95929de59f5") + (at 134 130) + (property "LCSC" "C72043" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d15e099d-b80e-54aa-bd4a-a7eea2c48927") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") + (tags "LED") + (property "Reference" "D4" + (uuid "ec4c1155-e8c0-54d1-a500-f916d60fb70b") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "GREEN" + (uuid "13679960-beac-5d8f-a14c-12bde62d6b98") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.485 -0.735) + (end -1.485 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.485 0.735) + (end 0.8 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.8 -0.735) + (end -1.485 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.8 -0.1) + (end -0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.8 0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.5 -0.4) + (end -0.8 -0.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0.8 -0.4) + (end -0.5 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0.8 0.4) + (end 0.8 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.7875 0) + (size 0.875 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "e89e1352-73af-5a85-8d64-9259766f8df6") + ) + (pad "2" smd roundrect + (at 0.7875 0) + (size 0.875 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 22 "/PWR_A") + (uuid "0cb22547-ceb1-5b4c-aa7d-55cc43c491e6") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d5d115dd-d95a-55f7-b8e6-9d5a871a10c2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "LED_SMD:LED_0603_1608Metric" + (layer "F.Cu") + (uuid "81d6af5b-3964-5087-a670-a75ab0703ee6") + (at 138 130) + (property "LCSC" "C72041" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "aa6dcdf9-7d94-5782-a933-e87df5627e7b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") + (tags "LED") + (property "Reference" "D5" + (uuid "4e96d6a8-f45f-5d1a-8922-2b630ce1c7b1") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "BLUE" + (uuid "d51a74b5-ae9c-5a74-a0a0-2a3114090050") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.485 -0.735) + (end -1.485 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.485 0.735) + (end 0.8 0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.8 -0.735) + (end -1.485 -0.735) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.8 -0.1) + (end -0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.8 0.4) + (end 0.8 0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.5 -0.4) + (end -0.8 -0.1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0.8 -0.4) + (end -0.5 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0.8 0.4) + (end 0.8 -0.4) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.7875 0) + (size 0.875 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "3dbbde60-063b-50d6-84e6-0ce456650f2f") + ) + (pad "2" smd roundrect + (at 0.7875 0) + (size 0.875 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 27 "/STAT_A") + (uuid "38e9a97f-2ec9-5d32-a9a1-bd64b8a4ba59") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/b832dc67-ac61-5cff-b5d4-6f2d2cdf6f9a") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Diode_SMD:D_SOD-323" + (layer "F.Cu") + (uuid "1fa1f56a-e568-596b-af02-efeba97159b2") + (at 164.5 118) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "eed710eb-1065-5106-a49c-1795e645a7cb") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOD-323") + (tags "SOD-323") + (property "Reference" "D6" + (at 2.9 0 0) + (layer "F.SilkS") + (uuid "79190826-681c-4fdc-b12c-3f8b6154fbab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "BAT54WS" + (at 0.1 1.9 0) + (layer "F.Fab") + (uuid "7c6bb9df-d0fb-4fc6-85db-faa2fbb7e2da") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "f2048a39-80ef-4169-8d09-1f2d88be028d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "75d2582e-c82e-4e5b-b310-50525c2c39dc") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.61 -0.85) + (end -1.61 0.85) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "9fa4a396-756e-42e1-95fe-51f739568da4") + ) + (fp_line + (start -1.61 -0.85) + (end 1.05 -0.85) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b2b464f7-a7f6-47fb-b985-5c555a333b02") + ) + (fp_line + (start -1.61 0.85) + (end 1.05 0.85) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "58527a67-6c09-4075-bc2b-ca92033302e2") + ) + (fp_line + (start -1.6 -0.95) + (end -1.6 0.95) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "14d3c7e3-424d-4c48-9696-e1af815ca346") + ) + (fp_line + (start -1.6 -0.95) + (end 1.6 -0.95) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "25943275-b4f4-458b-968e-4e7d1b18b813") + ) + (fp_line + (start -1.6 0.95) + (end 1.6 0.95) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b091ffbd-8d7a-4fd2-affc-9bca98ed58c8") + ) + (fp_line + (start 1.6 -0.95) + (end 1.6 0.95) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2d3ac3c3-21b1-436c-a482-be0e5cbc03dc") + ) + (fp_line + (start -0.9 -0.7) + (end 0.9 -0.7) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "a91bf8a8-a86b-4c9d-b9d5-768d008733e0") + ) + (fp_line + (start -0.9 0.7) + (end -0.9 -0.7) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "6b9cddb4-30e0-4176-ba95-a9a8f1eebdf1") + ) + (fp_line + (start -0.3 -0.35) + (end -0.3 0.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "57ce2fc2-7393-47f8-a2b5-b7c698d824b9") + ) + (fp_line + (start -0.3 0) + (end -0.5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "736d82eb-b026-4c17-b85c-32188fb4efe7") + ) + (fp_line + (start -0.3 0) + (end 0.2 -0.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c0a23ccb-47a9-4e99-add2-9e1dd8cc2ef7") + ) + (fp_line + (start 0.2 -0.35) + (end 0.2 0.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "144ca42e-2457-408a-a685-f16c6c456078") + ) + (fp_line + (start 0.2 0) + (end 0.45 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "582a92da-4d85-4031-886e-0b167511d5ce") + ) + (fp_line + (start 0.2 0.35) + (end -0.3 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "027f9db6-b42c-444b-a815-728f17de2c0d") + ) + (fp_line + (start 0.9 -0.7) + (end 0.9 0.7) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b8ae0859-36a8-41d7-bebb-140105094216") + ) + (fp_line + (start 0.9 0.7) + (end -0.9 0.7) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "4aa2c486-5a5a-4bc8-938c-7f12da303ff1") + ) + (fp_text user "${REFERENCE}" + (at 0 -1.85 0) + (layer "F.Fab") + (uuid "8c174789-8e4c-4a28-9d51-3650bdcb2856") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -1.05 0) + (size 0.6 0.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "8ca31b66-f8b6-45f9-8378-2150b0b7a501") + (net 3 "/+3V3") + (uuid "fba14158-ef31-56a1-8dc6-24b57e2a7d27") + ) + (pad "2" smd roundrect + (at 1.05 0) + (size 0.6 0.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "c9761b48-9e0e-49d7-8a73-4e53ce23d384") + (net 16 "/HOME") + (uuid "f25f70a0-18f3-5f13-a475-c11bd4c35bbf") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/1411384d-6125-5ba2-8940-ab8b86bbcd02") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Diode_SMD:D_SOD-323" + (layer "F.Cu") + (uuid "759807f8-de7c-5eab-a310-50584e457366") + (at 164.5 115.85) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "b4813d35-676a-5369-98c6-23a2765ef23e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOD-323") + (tags "SOD-323") + (property "Reference" "D7" + (at 2.9 0 0) + (layer "F.SilkS") + (uuid "79190826-681c-4fdc-b12c-3f8b6154fbab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "BAT54WS" + (at 0.1 1.9 0) + (layer "F.Fab") + (uuid "7c6bb9df-d0fb-4fc6-85db-faa2fbb7e2da") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "f2048a39-80ef-4169-8d09-1f2d88be028d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "75d2582e-c82e-4e5b-b310-50525c2c39dc") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.61 -0.85) + (end -1.61 0.85) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "9fa4a396-756e-42e1-95fe-51f739568da4") + ) + (fp_line + (start -1.61 -0.85) + (end 1.05 -0.85) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b2b464f7-a7f6-47fb-b985-5c555a333b02") + ) + (fp_line + (start -1.61 0.85) + (end 1.05 0.85) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "58527a67-6c09-4075-bc2b-ca92033302e2") + ) + (fp_line + (start -1.6 -0.95) + (end -1.6 0.95) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "14d3c7e3-424d-4c48-9696-e1af815ca346") + ) + (fp_line + (start -1.6 -0.95) + (end 1.6 -0.95) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "25943275-b4f4-458b-968e-4e7d1b18b813") + ) + (fp_line + (start -1.6 0.95) + (end 1.6 0.95) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b091ffbd-8d7a-4fd2-affc-9bca98ed58c8") + ) + (fp_line + (start 1.6 -0.95) + (end 1.6 0.95) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2d3ac3c3-21b1-436c-a482-be0e5cbc03dc") + ) + (fp_line + (start -0.9 -0.7) + (end 0.9 -0.7) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "a91bf8a8-a86b-4c9d-b9d5-768d008733e0") + ) + (fp_line + (start -0.9 0.7) + (end -0.9 -0.7) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "6b9cddb4-30e0-4176-ba95-a9a8f1eebdf1") + ) + (fp_line + (start -0.3 -0.35) + (end -0.3 0.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "57ce2fc2-7393-47f8-a2b5-b7c698d824b9") + ) + (fp_line + (start -0.3 0) + (end -0.5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "736d82eb-b026-4c17-b85c-32188fb4efe7") + ) + (fp_line + (start -0.3 0) + (end 0.2 -0.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c0a23ccb-47a9-4e99-add2-9e1dd8cc2ef7") + ) + (fp_line + (start 0.2 -0.35) + (end 0.2 0.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "144ca42e-2457-408a-a685-f16c6c456078") + ) + (fp_line + (start 0.2 0) + (end 0.45 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "582a92da-4d85-4031-886e-0b167511d5ce") + ) + (fp_line + (start 0.2 0.35) + (end -0.3 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "027f9db6-b42c-444b-a815-728f17de2c0d") + ) + (fp_line + (start 0.9 -0.7) + (end 0.9 0.7) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b8ae0859-36a8-41d7-bebb-140105094216") + ) + (fp_line + (start 0.9 0.7) + (end -0.9 0.7) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "4aa2c486-5a5a-4bc8-938c-7f12da303ff1") + ) + (fp_text user "${REFERENCE}" + (at 0 -1.85 0) + (layer "F.Fab") + (uuid "8c174789-8e4c-4a28-9d51-3650bdcb2856") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -1.05 0) + (size 0.6 0.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "8ca31b66-f8b6-45f9-8378-2150b0b7a501") + (net 3 "/+3V3") + (uuid "734011ec-1b49-5c90-b10d-252275dae0e9") + ) + (pad "2" smd roundrect + (at 1.05 0) + (size 0.6 0.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "c9761b48-9e0e-49d7-8a73-4e53ce23d384") + (net 14 "/HALL") + (uuid "4a0700ef-37f0-5b88-ba94-500ccf5ad467") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/a9befe6a-5f6b-504a-aee1-fb17cf6894f4") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Fuse:Fuse_1812_4532Metric" + (layer "F.Cu") + (uuid "c7cdf87a-c09a-5ff3-97a5-b1c6089cda7b") + (at 112.6 116.2) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "6c496cf9-feae-5a21-81ea-f307e9920feb") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Fuse SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator") + (tags "fuse") + (property "Reference" "F1" + (uuid "57a42d1c-d753-547f-8a9a-ad719abce0ec") + (at 0 -2.65 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.5A PTC" + (uuid "403b8467-e48a-5cd8-b6ef-279c23687bc3") + (at 0 2.65 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.386252 -1.71) + (end 1.386252 -1.71) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.386252 1.71) + (end 1.386252 1.71) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -1.95) + (end 2.95 1.95) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -2.25 -1.6) + (end 2.25 1.6) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -2.1375 0) + (size 1.125 3.4) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.222222) + (net 34 "/VIN_RAW") + (uuid "c54d5d70-7145-5061-8155-849f6614cacf") + ) + (pad "2" smd roundrect + (at 2.1375 0) + (size 1.125 3.4) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.222222) + (net 33 "/VIN_FUSED") + (uuid "2bbcd5ea-2f6d-5504-9a21-7b6740d358a3") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Fuse.3dshapes/Fuse_1812_4532Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/cfb237ae-57a5-5f9c-b4c9-2a9692ece986") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "MountingHole:MountingHole_3.2mm_M3" + (layer "F.Cu") + (uuid "2a1c599c-6415-57a2-a9ab-703f370bb0be") + (at 115.24 107.54) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bc77a473-242a-5dba-999d-ca782bed6faf") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py") + (tags "mountinghole M3") + (property "Reference" "H1" + (uuid "7bae9581-700a-593c-ba05-6d47240e9872") + (at 0 -4.15 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M3" + (uuid "af1be946-6e50-5659-b565-c1829210e2f4") + (at 0 4.15 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr exclude_from_pos_files exclude_from_bom) + (fp_circle + (center 0 0) + (end 3.2 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + ) + (fp_circle + (center 0 0) + (end 3.45 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 0) + (size 3.2 3.2) + (drill 3.2) + (layers "*.Cu" "*.Mask") + (uuid "edb82e79-a435-593d-b646-634e7f78c56e") + ) + (embedded_fonts no) + (path "/a55fb8bf-893f-5507-b859-4affb8349791") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "MountingHole:MountingHole_3.2mm_M3" + (layer "F.Cu") + (uuid "410581e1-7b17-53bf-b0a3-1dfbcbfd9e21") + (at 113.97 155.8) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "3da4840f-5ad4-5ce4-8fc9-bc532e20c042") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py") + (tags "mountinghole M3") + (property "Reference" "H2" + (uuid "4a8f105f-6689-5dad-b7c8-e4093dc1f80f") + (at 0 -4.15 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M3" + (uuid "be8b045a-a0c4-541f-80d6-a6bf1193a367") + (at 0 4.15 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr exclude_from_pos_files exclude_from_bom) + (fp_circle + (center 0 0) + (end 3.2 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + ) + (fp_circle + (center 0 0) + (end 3.45 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 0) + (size 3.2 3.2) + (drill 3.2) + (layers "*.Cu" "*.Mask") + (uuid "9a9677d6-d505-5e0d-99b9-09287dd4c7ac") + ) + (embedded_fonts no) + (path "/036a4b56-52b2-5771-b3c6-5223c9161179") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "MountingHole:MountingHole_3.2mm_M3" + (layer "F.Cu") + (uuid "9a42c004-2b59-5dba-bb56-ac70a0b0e0e0") + (at 166.04 122.78) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "63a3b944-5261-5712-8635-9fc717d5f998") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py") + (tags "mountinghole M3") + (property "Reference" "H3" + (uuid "44c0bc15-79a9-5710-92d8-3d1b7c0a89f2") + (at 0 4.4 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M3" + (uuid "b31ba191-5e36-53d9-8369-907c6138bf78") + (at 0 4.15 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr exclude_from_pos_files exclude_from_bom) + (fp_circle + (center 0 0) + (end 3.2 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + ) + (fp_circle + (center 0 0) + (end 3.45 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 0) + (size 3.2 3.2) + (drill 3.2) + (layers "*.Cu" "*.Mask") + (uuid "a772e3b0-5618-5fe5-9e1c-41e199a50d0a") + ) + (embedded_fonts no) + (path "/c9f982e9-5ced-5e2b-8969-2804505c7ee4") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "MountingHole:MountingHole_3.2mm_M3" + (layer "F.Cu") + (uuid "1624629f-55d9-5de0-b7d3-9694627b1f4d") + (at 166.04 150.72) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "a60c4481-468e-526b-9bdc-b1ba456b9ec7") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py") + (tags "mountinghole M3") + (property "Reference" "H4" + (uuid "1c7101c8-65d8-5047-9253-81e89229da3c") + (at 0 -4.15 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M3" + (uuid "b5a220a5-2c80-5944-b112-ecce83bb9484") + (at 0 4.15 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr exclude_from_pos_files exclude_from_bom) + (fp_circle + (center 0 0) + (end 3.2 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + ) + (fp_circle + (center 0 0) + (end 3.45 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 0) + (size 3.2 3.2) + (drill 3.2) + (layers "*.Cu" "*.Mask") + (uuid "8f3ed90a-2516-52fd-aeab-9f7320e84b17") + ) + (embedded_fonts no) + (path "/459d15f8-4315-546a-9288-98ab8f88b4b8") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal" + (layer "F.Cu") + (uuid "5548a4a4-1c3c-5a1b-b210-dba2baff838e") + (at 112.3 125 270) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d62132bb-40cb-51c0-87c3-51fb6e2fd72d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Barrel Jack, 2.0mm ID, 5.5mm OD, 24V, 8A, no switch, https://www.cui.com/product/resource/pj-063ah.pdf") + (tags "barrel jack cui dc power") + (property "Reference" "J1" + (at 0 -2.3 0) + (layer "F.SilkS") + (uuid "4121a2f6-118f-4220-a08b-294b72087f4d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "12V DC 5.5x2.1" + (at 0 13 0) + (layer "F.Fab") + (uuid "a72f9ad1-35e7-49c9-ba9c-cc973eb1367d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "12fc0690-0dfe-40b8-91f7-e0cc3b278fbf") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "45e06c7f-7ab6-4dd8-b6ed-33c63f308d2e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -5.11 -1.11) + (end -2.3 -1.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b31d6d79-ea1c-4c95-adb1-d21f1549c8f5") + ) + (fp_line + (start -5.11 4.95) + (end -5.11 -1.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "d7282e65-fbbb-4589-a2b7-746485f18a1e") + ) + (fp_line + (start -5.11 12.11) + (end -5.11 9.05) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "365c0f1f-1b45-4a4b-8710-f676ccb7d630") + ) + (fp_line + (start -1 -1.3) + (end 1 -1.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "4ce3e448-49de-451c-a0b3-03ea9eb41d6b") + ) + (fp_line + (start 2.3 -1.11) + (end 5.11 -1.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "d6075507-462e-487d-baae-66192f409fe0") + ) + (fp_line + (start 5.11 -1.11) + (end 5.11 4.95) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "05654b49-8885-4fc8-b161-e88b30d91441") + ) + (fp_line + (start 5.11 9.05) + (end 5.11 12.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "dfb16273-9f1d-4d4f-bfbe-7c84d769e98e") + ) + (fp_line + (start 5.11 12.11) + (end -5.11 12.11) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "75b837a2-4a72-4c7b-9bc8-f8054ed2e465") + ) + (fp_line + (start -6 -1.5) + (end -6 12.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "231c929b-1a06-477f-b119-0e42c6149b81") + ) + (fp_line + (start -6 12.5) + (end 6 12.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "da936a0b-44e9-4b73-9b11-0085280187ed") + ) + (fp_line + (start 6 -1.5) + (end -6 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "61183066-65c4-4fdd-b2f3-46f12eee4f84") + ) + (fp_line + (start 6 12.5) + (end 6 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "994a3c6b-3c6a-453c-a9e5-c29f4506fe10") + ) + (fp_line + (start -5 -1) + (end -1 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0c70ef17-066c-4008-bb24-d1c8e7b37da4") + ) + (fp_line + (start -5 12) + (end -5 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "501e4880-e200-4cae-9ec7-9f0ffa2744a5") + ) + (fp_line + (start -1 -1) + (end 0 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "bc59247c-c84d-4577-80df-c4829fcd00d7") + ) + (fp_line + (start 0 0) + (end 1 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9cb6c357-d528-480c-9621-8deecd3dd26f") + ) + (fp_line + (start 1 -1) + (end 5 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f57de3e0-3282-471e-8803-c93177d98f5c") + ) + (fp_line + (start 5 -1) + (end 5 12) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "56b2ce76-feed-441e-8190-961d8d9056a0") + ) + (fp_line + (start 5 12) + (end -5 12) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "823eaac6-3feb-4d65-b523-bfd790226bbb") + ) + (fp_text user "${REFERENCE}" + (at 0 5.5 0) + (layer "F.Fab") + (uuid "620f403a-3d36-48e5-8020-547abc139e82") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at 0 9 270) + (size 1.6 1.6) + (drill 1.6) + (layers "*.Cu" "*.Mask") + (uuid "870945bb-682c-4978-abf1-e7f423b54994") + (uuid "b27de65b-74d0-50f5-9482-aab0af68f84f") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 4 2) + (drill oval 3 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "eea39138-d740-4b91-b2fe-3ba62fa313fd") + (net 34 "/VIN_RAW") + (uuid "372f69f9-a960-531f-8ec1-0a3f732c1ebb") + ) + (pad "2" thru_hole oval + (at 0 6 270) + (size 3.3 2) + (drill oval 2.3 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "cc1f23b8-0ffb-4ed5-bc80-0c7dda1d7df4") + (net 1 "/GND") + (uuid "d9a27ede-3898-58c2-97b2-140678ee6829") + ) + (pad "MP" thru_hole oval + (at -4.5 7 270) + (size 2 3.5) + (drill oval 1 2.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "6f34993f-b2d4-451c-82f0-2ba80ed4d83e") + (uuid "4971d2af-a646-594a-98a1-f956b4a663a1") + ) + (pad "MP" thru_hole oval + (at 4.5 7 270) + (size 2 3.5) + (drill oval 1 2.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "a15e4e26-333b-4c9b-803f-e0ff9f539c8c") + (uuid "4971d2af-a646-594a-98a1-f956b4a663a1") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_BarrelJack.3dshapes/BarrelJack_CUI_PJ-063AH_Horizontal.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/ed0ad194-4212-580e-b303-3998de02f3c1") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12" + (layer "F.Cu") + (uuid "2aff47df-92a6-5b73-bf51-ad8831069c34") + (at 103.4 144 270) + (property "LCSC" "C165948" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "34368228-3982-5a9b-8554-ed8ba656f589") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "USB Type-C receptacle for USB 2.0 and PD, http://www.krhro.com/uploads/soft/180320/1-1P320120243.pdf") + (tags "usb usb-c 2.0 pd") + (property "Reference" "J2" + (at 0 -5.645 0) + (layer "F.SilkS") + (uuid "a144ce76-cc23-44fb-8108-bf18e64a4c3d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "USB-C" + (at 0 5.1 0) + (layer "F.Fab") + (uuid "0ca5cf76-e951-4e58-a402-14dc42a864b3") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "2b954944-56ad-4032-bee5-bd7186324aef") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 270) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "9d55800b-f601-4afa-9fad-eee332310ae0") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -4.7 -1.9) + (end -4.7 0.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "9513b845-7495-41b4-99da-c8a12a5f4b76") + ) + (fp_line + (start -4.7 2) + (end -4.7 3.9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7abeef8d-db92-4e88-b3d6-7c7e4efa4938") + ) + (fp_line + (start -4.7 3.9) + (end 4.7 3.9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "f40329f5-4d09-479c-8f81-97fdcd13c5cd") + ) + (fp_line + (start 4.7 -1.9) + (end 4.7 0.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "177e7db1-b916-4e65-ace8-532e6e1f85db") + ) + (fp_line + (start 4.7 2) + (end 4.7 3.9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "bd122681-67e3-4c23-b564-57e345c7c818") + ) + (fp_line + (start -5.32 -5.27) + (end -5.32 4.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d939342c-cab3-429e-ad71-738d34173267") + ) + (fp_line + (start -5.32 -5.27) + (end 5.32 -5.27) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3215d7dd-650e-4c6a-86e5-bc970c8d9c6c") + ) + (fp_line + (start -5.32 4.15) + (end 5.32 4.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c38cb6a1-740b-49d2-b49e-f8ce3382fe48") + ) + (fp_line + (start 5.32 -5.27) + (end 5.32 4.15) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3b610068-7f90-495b-a772-9a6b7e6a55c9") + ) + (fp_line + (start -4.47 -3.65) + (end -4.47 3.65) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "47095738-bb75-4e91-802c-f92840c443b3") + ) + (fp_line + (start -4.47 -3.65) + (end 4.47 -3.65) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "6142486d-ba8a-4b38-a6ca-d52b6a020ef2") + ) + (fp_line + (start -4.47 3.65) + (end 4.47 3.65) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "84966fee-864e-4cdc-8345-c62bca33694f") + ) + (fp_line + (start 4.47 -3.65) + (end 4.47 3.65) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f6b3cf35-21be-4e1f-8c99-3404cfc41d3f") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "9189a13a-f353-4ddb-8257-370c54398cd0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at -2.89 -2.6 270) + (size 0.65 0.65) + (drill 0.65) + (layers "*.Cu" "*.Mask") + (uuid "e13b4b37-788a-41d5-87ca-c66be43ee32d") + (uuid "19850610-7e13-5570-8828-dded7554575f") + ) + (pad "" np_thru_hole circle + (at 2.89 -2.6 270) + (size 0.65 0.65) + (drill 0.65) + (layers "*.Cu" "*.Mask") + (uuid "4558f1f0-2fa3-46e1-a220-284fa2707bb5") + (uuid "19850610-7e13-5570-8828-dded7554575f") + ) + (pad "A1" smd rect + (at -3.25 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "245fae56-8b58-4bd8-bbf1-36624dc3fa3e") + (net 1 "/GND") + (uuid "d586faf6-af96-5cec-a2e4-2851e64d2d4e") + ) + (pad "A4" smd rect + (at -2.45 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "412cd3c1-0d89-4ca6-be0e-1b17d8471f5a") + (net 32 "/VBUS") + (uuid "5e2b5c5d-bf9f-5769-a68f-c012f0fc51d0") + ) + (pad "A5" smd rect + (at -1.25 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "93953890-acba-456b-bb6d-b1e79179ffa0") + (net 6 "/CC1") + (uuid "9a6a3bb6-8d4a-53af-b6fb-a2500c8d260d") + ) + (pad "A6" smd rect + (at -0.25 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "6a642da3-3122-4031-a6e9-68498b0f5bb9") + (net 31 "/USB_DP") + (uuid "832ca5f2-25a2-55fb-b178-f97b34e0a630") + ) + (pad "A7" smd rect + (at 0.25 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "01b9b129-063c-4bae-b620-9610006254cb") + (net 30 "/USB_DM") + (uuid "0dd352fc-7d6a-533f-a2cc-06d40c144009") + ) + (pad "A8" smd rect + (at 1.25 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "46ecdf8a-0917-4257-a388-b77e7451dc23") + (net 47 "unconnected-(J2-SBU1-PadA8)") + (uuid "1ee3d0f4-86b0-5817-812a-70d06da1c610") + ) + (pad "A9" smd rect + (at 2.45 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "a35f3da7-7460-43f1-99b7-9ed521817778") + (net 32 "/VBUS") + (uuid "6fb2d688-805d-54ef-b017-09a3c8ca41be") + ) + (pad "A12" smd rect + (at 3.25 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "3795b0f1-50f9-473e-9d26-381fc08b3c2d") + (net 1 "/GND") + (uuid "68f69939-6315-5b90-ba46-3f55d34009ba") + ) + (pad "B1" smd rect + (at 3.25 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c9e8a0db-2a60-41d9-b783-6c4e64a8fb5d") + (net 1 "/GND") + (uuid "76aaecd2-a682-5ab2-8df1-2a435dbbd004") + ) + (pad "B4" smd rect + (at 2.45 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "51b193ee-c8c2-4ee6-8d8c-14b79a2c1520") + (net 32 "/VBUS") + (uuid "43c066f5-8b28-57fa-81e9-6d0c4c021821") + ) + (pad "B5" smd rect + (at 1.75 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "45f8f791-f545-4341-9848-fb81a03703a6") + (net 7 "/CC2") + (uuid "ca44041f-288a-517b-ba9b-bd0a2abfb05f") + ) + (pad "B6" smd rect + (at 0.75 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "efc27675-62a0-44de-8210-29c2190dd309") + (net 31 "/USB_DP") + (uuid "350b135e-9b01-5a3f-a01d-25bb6527d892") + ) + (pad "B7" smd rect + (at -0.75 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "96622dcb-c1cc-4b7d-8455-8cd0ce1e5c34") + (net 30 "/USB_DM") + (uuid "61837419-9bb3-586b-bb59-b5050d715b0a") + ) + (pad "B8" smd rect + (at -1.75 -4.045 270) + (size 0.3 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "09bb6e12-e7e5-4788-b43e-4cc6c50a557a") + (net 48 "unconnected-(J2-SBU2-PadB8)") + (uuid "53384acf-20ca-5dcf-80db-6328724f52ca") + ) + (pad "B9" smd rect + (at -2.45 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "70539c09-2020-4a42-a156-43d1513170d0") + (net 32 "/VBUS") + (uuid "f24026fb-0159-5620-b983-c9648befcc40") + ) + (pad "B12" smd rect + (at -3.25 -4.045 270) + (size 0.6 1.45) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "eda87c04-3a59-4e2c-a9bd-f59ed31672aa") + (net 1 "/GND") + (uuid "a615c776-47ae-5576-aca6-2d29d11139d5") + ) + (pad "S1" thru_hole oval + (at -4.32 -3.13 270) + (size 1 2.1) + (drill oval 0.6 1.7) + (property pad_prop_heatsink) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "69c3dc88-a37e-49ef-ae4d-497d3191ad5b") + (net 1 "/GND") + (uuid "7d605899-303c-5f9b-bbdd-b615c228cb0e") + ) + (pad "S1" thru_hole oval + (at -4.32 1.05 270) + (size 1 1.6) + (drill oval 0.6 1.2) + (property pad_prop_heatsink) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "5991ca6f-c5c1-4692-8fe9-cf4b7ca50c4b") + (net 1 "/GND") + (uuid "7d605899-303c-5f9b-bbdd-b615c228cb0e") + ) + (pad "S1" thru_hole oval + (at 4.32 -3.13 270) + (size 1 2.1) + (drill oval 0.6 1.7) + (property pad_prop_heatsink) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "af5ae63f-ef36-487e-a6b8-831b84890f25") + (net 1 "/GND") + (uuid "7d605899-303c-5f9b-bbdd-b615c228cb0e") + ) + (pad "S1" thru_hole oval + (at 4.32 1.05 270) + (size 1 1.6) + (drill oval 0.6 1.2) + (property pad_prop_heatsink) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (uuid "e783dde5-f762-4528-9b55-9220820b0b1c") + (net 1 "/GND") + (uuid "7d605899-303c-5f9b-bbdd-b615c228cb0e") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_USB.3dshapes/USB_C_Receptacle_HRO_TYPE-C-31-M-12.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/8d1310f0-9128-5564-a14a-afbf40a99a6e") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "8dae16ba-0ad7-5b4c-bda1-e4ad19a6d6fb") + (at 104.5 103.4 270) + (property "LCSC" "C158012" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "432b8cf7-603f-5276-8a78-1a3ab8c7fd8b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J3" + (uuid "de7d54e2-8d61-52ed-9ddd-41e3bff184de") + (at 3.75 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "SPIN MOTOR" + (uuid "c6e69ccf-604a-5edb-ba7b-adae94e2bf09") + (at 3.75 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 3.75 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 9.3 -0.2) + (end 9.3 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 9.3 2.75) + (end 3.75 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 10.05 -0.2) + (end 9.3 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 10.06 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 6.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 8.25 -2.45) + (end 10.05 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 10.45 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 9.95 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 3.75 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 38 "/X_2B") + (uuid "d0598dd9-23b1-5f71-8786-69907d2ee190") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 37 "/X_2A") + (uuid "6f84fae8-5f82-58a5-871e-621423fad3f7") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 35 "/X_1A") + (uuid "c719095e-2585-5df9-882a-e943b8c5bacc") + ) + (pad "4" thru_hole oval + (at 7.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 36 "/X_1B") + (uuid "66a9a0a3-ba43-519e-9e0b-7b22aeff233e") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/708cf780-e089-5de2-8c0f-1543c42c32ca") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "45179826-373e-5067-a2ed-b9ec0691a7fd") + (at 176.5 103.4 270) + (property "LCSC" "C158012" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ab0ec991-30b1-576f-b14d-de6fd83a6ead") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J4" + (uuid "893a002e-cff7-5baf-b50e-3e8f749aa8e6") + (at 3.75 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "ARM MOTOR" + (uuid "9fdae7cd-8659-5d6e-8dc5-5969a6ccb97a") + (at 3.75 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 3.75 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 9.3 -0.2) + (end 9.3 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 9.3 2.75) + (end 3.75 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 10.05 -0.2) + (end 9.3 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 10.06 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 6.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 8.25 -2.45) + (end 10.05 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 10.45 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 9.95 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 3.75 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 42 "/Y_1B") + (uuid "6b123bc3-cd4c-5f8b-8632-58059a653ac2") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 41 "/Y_1A") + (uuid "e783f657-cf05-5af5-b1e2-600ee0d840d7") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 43 "/Y_2A") + (uuid "f2e151f8-f85d-5bef-bad1-537a30f692ed") + ) + (pad "4" thru_hole oval + (at 7.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 44 "/Y_2B") + (uuid "111cab74-be40-5c27-aace-7e7835913ffe") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/2b484b55-795c-57ba-9b9a-6be1442a758d") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "3b63aa94-0284-5d9e-b8cb-6c0b61230065") + (at 176.5 118.5 270) + (property "LCSC" "C144394" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "1fe2a19e-aa0a-5f99-8ba2-6586c0e16de1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J5" + (uuid "7d83eaa4-6d64-562c-8a4b-612e0b9bb0a5") + (at 2.5 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "HOME SW" + (uuid "d840964b-4c13-544c-9bf8-58b036038197") + (at 2.5 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 -0.2) + (end 6.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 7.55 -0.2) + (end 6.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 7.56 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 4.25 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 5.75 -2.45) + (end 7.55 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 7.95 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 7.45 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 2.5 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 3 "/+3V3") + (uuid "bb9b64a1-5b74-5433-b47e-9883f16be1a8") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 17 "/HOME_RAW") + (uuid "07bfa94b-40e8-5549-9860-ff3c514c26ad") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "08f26098-5885-581f-8530-c5b137293375") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/27bcc6d4-646d-5537-a603-df25b3cb5e89") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "a8a85f3d-4fd1-5d51-b5f4-7667b7825729") + (at 176.5 129.6 270) + (property "LCSC" "C144394" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "5cb613f6-b12a-530a-bfc0-07a4a26eb131") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J6" + (uuid "61176638-f716-5abc-aa21-0fa8245cb1e2") + (at 2.5 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "HALL" + (uuid "b5f5b44d-3fd0-505c-a32e-ae9f17670028") + (at 2.5 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 -0.2) + (end 6.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 7.55 -0.2) + (end 6.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 7.56 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 4.25 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 5.75 -2.45) + (end 7.55 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 7.95 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 7.45 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 2.5 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 4 "/+5V") + (uuid "f6fa1b8c-353e-51b0-abd1-30ea7afcbf7f") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "/HALL_RAW") + (uuid "c1166c02-4ac6-570f-91de-97b00450391e") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "aa1eda84-2d56-52d8-9bb1-821d58de9bc8") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/549450fb-f2e4-54be-b663-61640c1ecfed") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (layer "F.Cu") + (uuid "133d31c3-5b26-5b9d-a19e-27ae5411f6b7") + (at 176.5 140.7 270) + (property "LCSC" "C144394" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8c7ce2e5-3504-542a-9748-ceae1e362683") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") + (tags "connector JST XH vertical") + (property "Reference" "J7" + (uuid "46711e1d-aaaa-564b-8d70-c3b57526f209") + (at 2.5 -3.55 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "LED STRIP" + (uuid "ba5ee8cb-b29d-5f11-ae56-1e51a4215ec4") + (at 2.5 4.6 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -2.85 -2.75) + (end -2.85 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.55 -0.2) + (end -1.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 -0.2) + (end -1.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.6 -2.75) + (end -2.85 -2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 -0.2) + (end 6.8 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 6.8 2.75) + (end 2.5 2.75) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 7.55 -0.2) + (end 6.8 -0.2) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -2.56 -2.46) + (end 7.56 3.51) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.55 -2.45) + (end -0.75 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 0.75 -2.45) + (end 4.25 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start 5.75 -2.45) + (end 7.55 -1.7) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + ) + (fp_rect + (start -2.95 -2.85) + (end 7.95 3.9) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -0.625 -2.35) + (end 0 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 0 -1.35) + (end 0.625 -2.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_rect + (start -2.45 -2.35) + (end 7.45 3.4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 2.5 2.7 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole roundrect + (at 0 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (roundrect_rratio 0.147059) + (net 4 "/+5V") + (uuid "d4970e94-4312-595d-a3ae-beccfa62ac80") + ) + (pad "2" thru_hole oval + (at 2.5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 21 "/LED_DOUT") + (uuid "a1dc3499-89f5-5368-aed9-ec87431cc706") + ) + (pad "3" thru_hole oval + (at 5 0 270) + (size 1.7 1.95) + (drill 0.95) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "7fe99a87-7e92-592c-89b8-5a04fc6432a9") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_JST.3dshapes/JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/0c6ee88d-6318-51af-a4e4-f4a9504c7a87") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "73121754-5eac-5e07-a171-c0db16bc766f") + (at 177.5 152) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "74bacf16-cb94-5c1b-b060-45ff34a41282") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Through hole straight pin header, 1x04, 2.54mm pitch, single row") + (tags "Through hole pin header THT 1x04 2.54mm single row") + (property "Reference" "J8" + (uuid "b656204c-dcab-576e-bb16-b0313f763041") + (at 0 -2.38 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "EXPANSION" + (uuid "00015b8d-39f4-5548-b634-5213b84c2be0") + (at 0 10 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -1.38 -1.38) + (end 0 -1.38) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.38 0) + (end -1.38 -1.38) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.38 1.27) + (end -1.38 9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.38 1.27) + (end 1.38 1.27) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -1.38 9) + (end 1.38 9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 1.38 1.27) + (end 1.38 9) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.77 -1.77) + (end 1.77 9.39) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -1.27 -0.635) + (end -0.635 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -1.27 8.89) + (end -1.27 -0.635) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -0.635 -1.27) + (end 1.27 -1.27) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 1.27 -1.27) + (end 1.27 8.89) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 1.27 8.89) + (end -1.27 8.89) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 3.81 90) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.7 1.7) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "/+3V3") + (uuid "e5e1450a-1ccb-5c64-bea1-2bac4cbaeab6") + ) + (pad "2" thru_hole circle + (at 0 2.54) + (size 1.7 1.7) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 13 "/EXP_IO32") + (uuid "c7f97231-d286-5ceb-9285-05d244cb829d") + ) + (pad "3" thru_hole circle + (at 0 5.08) + (size 1.7 1.7) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 12 "/EXP_IO25") + (uuid "883cb7fb-6da7-50a2-9144-ac28ba132613") + ) + (pad "4" thru_hole circle + (at 0 7.62) + (size 1.7 1.7) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "08a7dfe9-3149-5c15-b49e-e4be824abeeb") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x04_P2.54mm_Vertical.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/7150e8ae-22e2-5a66-8dc8-eedaf1fca13a") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm" + (layer "F.Cu") + (uuid "001acaa3-59b5-50e6-8ed9-f4ba6865fa61") + (at 136 108) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f2eb0b12-cee8-512f-8138-939309eb1744") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open") + (tags "solder jumper open") + (property "Reference" "JP1" + (at 0 -1.8 0) + (layer "F.SilkS") + (uuid "732d89d4-2969-4956-97df-5bf80fb988d0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "A4988" + (at 0 1.9 0) + (layer "F.Fab") + (uuid "e5a4db1a-c061-4b0a-ad51-a24c8790a5c4") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "efb33a39-f8e2-4059-81ec-af7a2bfc56a7") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "c1af3a12-4d8b-4748-870e-a07d94a67d7c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (zone_connect 1) + (attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges) + (fp_rect + (start -0.15 -0.75) + (end 0.15 0.75) + (stroke + (width 0) + (type default) + ) + (fill yes) + (layer "F.Mask") + (uuid "3b5e2732-2a4c-4917-b09e-a67ffc4435d7") + ) + (fp_line + (start -1.4 -1) + (end 1.4 -1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "8836b64e-369e-4f15-96a2-8a1544e9b710") + ) + (fp_line + (start -1.4 1) + (end -1.4 -1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "2b78501f-9740-4fac-a533-e8eeb064d3d8") + ) + (fp_line + (start 1.4 -1) + (end 1.4 1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "bef3ac59-f4df-486e-ae42-6082ded2534b") + ) + (fp_line + (start 1.4 1) + (end -1.4 1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0afca7c1-a1da-4c94-baed-c05f52325e81") + ) + (fp_line + (start -1.65 -1.25) + (end -1.65 1.25) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "cd488bed-8cd4-4cfb-b5d4-35466b1cd694") + ) + (fp_line + (start -1.65 -1.25) + (end 1.65 -1.25) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5e522d62-2040-4627-b73c-ae2bc7b5c9a4") + ) + (fp_line + (start 1.65 1.25) + (end -1.65 1.25) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "80727963-3592-4046-a0ca-c28e2e012625") + ) + (fp_line + (start 1.65 1.25) + (end 1.65 -1.25) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5e939036-bb28-43e0-a5a9-2b1fa0e13751") + ) + (pad "1" smd rect + (at -0.65 0) + (size 1 1.5) + (layers "F.Cu" "F.Mask") + (uuid "003e114e-b0ac-40f1-9aec-50bbd5050086") + (net 3 "/+3V3") + (uuid "d5b08315-c9b5-5c27-9063-0c54a5a527b9") + ) + (pad "2" smd rect + (at 0.65 0) + (size 1 1.5) + (layers "F.Cu" "F.Mask") + (uuid "a5e10e8c-d3d0-475e-966d-105f9d5f626e") + (net 9 "/DRV_VDD") + (uuid "09a94fdb-7260-54c5-9c99-cf20aed9a9f1") + ) + (embedded_fonts no) + (path "/ef559780-d426-5a77-9b5b-eaf0cb48c92e") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT" + (layer "F.Cu") + (uuid "29356138-e9ed-5f32-a9c6-a604bf09e287") + (at 118 135) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "647f66ff-1bb0-5397-b638-218e9977be54") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "DCDC-Converter, RECOM, RECOM_R-78E-0.5, SIP-3, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Exx-0.5.pdf") + (tags "dc-dc recom buck sip-3 pitch 2.54mm") + (property "Reference" "PS1" + (uuid "1d47199e-7378-5dcf-a059-a735ab9776f3") + (at 2.54 -7.56 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "R-78E5.0-1.0" + (uuid "50a5902f-b25c-52ed-8652-e70e94f2d1ed") + (at 2.54 3 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr through_hole) + (fp_line + (start -3.61 1.06) + (end -3.61 2.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.61 2.3) + (end -2.37 2.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.37 -6.56) + (end 8.35 -6.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -3.37 2.06) + (end -3.37 -6.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 8.35 -6.56) + (end 8.35 2.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 8.35 2.06) + (end -3.37 2.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -3.57 -6.75) + (end 8.54 2.25) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_line + (start -3.31 -6.5) + (end 8.29 -6.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -3.31 1) + (end -3.31 -6.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start -2.31 2) + (end -3.31 1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 8.29 -6.5) + (end 8.29 2) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_line + (start 8.29 2) + (end -2.31 2) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 2.54 -2.25 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.5 2.3) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 2 "/+12V") + (uuid "3d606cca-6dc4-5808-8454-9f70af970cdb") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.5 2.3) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "/GND") + (uuid "7751201a-b024-59b0-8434-77af77bee7c0") + ) + (pad "3" thru_hole oval + (at 5.08 0) + (size 1.5 2.3) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 5 "/+5V_REG") + (uuid "92445cfa-b094-5e86-a1d5-8be0f1e7fd53") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Converter_DCDC.3dshapes/Converter_DCDC_RECOM_R-78E-0.5_THT.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/eca5d989-b3a9-5315-923f-dbc7574ff14d") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-23" + (layer "F.Cu") + (uuid "34bdfe8e-a0e9-5e6a-b751-8e9a0c7f1e1f") + (at 128 147.2) + (property "LCSC" "C20526" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8e27e0be-88a0-59b1-9af1-d7b66056a1a2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOT TO_SOT_SMD") + (property "Reference" "Q1" + (uuid "4da47c95-c5c5-5568-a9e7-fb2543ac1411") + (at 0 -2.4 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "MMBT3904" + (uuid "2cd83c77-0596-58fb-acc5-25ab58126947") + (at 0 2.4 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.76 -1.56) + (end 0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 -1.51) + (end -0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 0.39) + (end -0.76 -0.39) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 1.56) + (end -0.76 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 -1.56) + (end 0.76 -0.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 0.56) + (end 0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 1.56) + (end -0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -1.3 -0.38) + (xy -1.06 -0.05) + (xy -1.54 -0.05) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -1.93 -1.5) + (end -0.9 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 -0.39) + (end -1.93 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 0.39) + (end -0.9 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 1.5) + (end -1.93 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -1.7) + (end 0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -1.5) + (end -0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -0.39) + (end -1.93 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 0.39) + (end -0.9 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 1.5) + (end -1.93 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 1.7) + (end -0.9 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 -1.7) + (end 0.9 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 -0.55) + (end 1.93 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 0.55) + (end 0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 1.7) + (end -0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.93 -0.55) + (end 1.93 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.93 0.55) + (end 0.9 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.325 -1.45) + (xy 0.65 -1.45) + (xy 0.65 1.45) + (xy -0.65 1.45) + (xy -0.65 -1.125) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 0.72 0.72) + (thickness 0.11) + ) + ) + ) + (pad "1" smd roundrect + (at -0.9375 -0.95) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 23 "/Q1B") + (uuid "cdf3fbb0-0a8b-5317-8a80-a63ea325d264") + ) + (pad "2" smd roundrect + (at -0.9375 0.95) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 25 "/RTS") + (uuid "c79263d6-0cd0-52cc-b992-60eae93c08c0") + ) + (pad "3" smd roundrect + (at 0.9375 0) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 11 "/EN") + (uuid "0f177608-1531-5ba3-bd4f-eb3f32bc1e39") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/11349a74-c0a9-5c21-82e3-92fca14936f5") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-23" + (layer "F.Cu") + (uuid "a4d80dcc-bf5b-5632-b200-f4e42faf88d7") + (at 128 151.2) + (property "LCSC" "C20526" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "cd18e13a-34dd-5899-8d93-d8eaa3e9e7a6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOT TO_SOT_SMD") + (property "Reference" "Q2" + (uuid "b6077846-8e91-5001-9240-7e261c7c3522") + (at 0 -2.4 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "MMBT3904" + (uuid "fa19dae3-f88e-5b01-9113-2cef709010e9") + (at 0 2.4 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.76 -1.56) + (end 0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 -1.51) + (end -0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 0.39) + (end -0.76 -0.39) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.76 1.56) + (end -0.76 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 -1.56) + (end 0.76 -0.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 0.56) + (end 0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.76 1.56) + (end -0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -1.3 -0.38) + (xy -1.06 -0.05) + (xy -1.54 -0.05) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -1.93 -1.5) + (end -0.9 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 -0.39) + (end -1.93 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 0.39) + (end -0.9 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.93 1.5) + (end -1.93 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -1.7) + (end 0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -1.5) + (end -0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 -0.39) + (end -1.93 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 0.39) + (end -0.9 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 1.5) + (end -1.93 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -0.9 1.7) + (end -0.9 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 -1.7) + (end 0.9 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 -0.55) + (end 1.93 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 0.55) + (end 0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 0.9 1.7) + (end -0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.93 -0.55) + (end 1.93 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.93 0.55) + (end 0.9 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.325 -1.45) + (xy 0.65 -1.45) + (xy 0.65 1.45) + (xy -0.65 1.45) + (xy -0.65 -1.125) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 0.72 0.72) + (thickness 0.11) + ) + ) + ) + (pad "1" smd roundrect + (at -0.9375 -0.95) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 24 "/Q2B") + (uuid "721d7176-a2fe-50fe-8967-f11b5c1a5572") + ) + (pad "2" smd roundrect + (at -0.9375 0.95) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 10 "/DTR") + (uuid "7a51e99a-e16d-56a4-9ac3-60709e067772") + ) + (pad "3" smd roundrect + (at 0.9375 0) + (size 1.475 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 18 "/IO0") + (uuid "02ecfe46-9e36-5139-9793-82fc687d66b5") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/226d855a-ed97-50e3-bc21-c9b8747baaf3") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "31f77d2f-5925-50f7-99fa-b6b83dfe8095") + (at 111.5 142.75) + (property "LCSC" "C23186" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "255441aa-93ce-55bf-9e6b-98362a174322") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R1" + (uuid "623948ed-4702-5b31-8736-08d3bcc2edd5") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "5.1k" + (uuid "94273dc2-064f-538c-a86a-80552f631af9") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 6 "/CC1") + (uuid "3ad671fb-2416-5273-98eb-54ddae0ab312") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "95fdb2c8-5a34-5602-98ed-86ceeb5cb627") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/a680cbe7-0f52-58fe-8242-a4cefcb892f1") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "5389057c-e6e0-5181-88e2-5b6dd438ad0a") + (at 157.5 118.5) + (property "LCSC" "C21190" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d055c20f-7adc-5dc7-9d54-e2ae03eb66f4") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R10" + (uuid "1e686ddc-8ade-56bd-b8f3-50126cb71746") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1k" + (uuid "8e1b1d35-798f-58c7-b763-08dd21d8177e") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 17 "/HOME_RAW") + (uuid "40b65474-2539-5246-bbcd-74ffcac2d93a") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 16 "/HOME") + (uuid "11a60641-9723-5eec-b754-be7d4da87bba") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/02b12c82-22e5-5040-b1cb-4f3d13b2e0a0") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "9eabd520-c397-5058-9ef1-93bf8a0c1ef6") + (at 154 120.7) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "aac6a386-1233-5f2c-ad39-bf6236fe6ead") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R11" + (uuid "7916b476-3264-5cb3-b564-0c4fafa509ef") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "4f5ad9f5-8557-505d-aeda-d7e234725cf1") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "fdb9bacb-b3ac-5e96-847f-fbbbb552a1c9") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 15 "/HALL_RAW") + (uuid "f76803c5-9f1f-5e2c-94af-ef96f546af65") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/57f73b68-632a-5478-b7a9-f190be911688") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "1b0679b0-ed44-5107-9345-e6632ad30960") + (at 157.5 120.7) + (property "LCSC" "C21190" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "012a06df-b1a3-5251-b0a9-6a2320b7e100") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R12" + (uuid "ff3fd57e-6e13-5caf-ae23-c7710e921da5") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1k" + (uuid "f591fb6a-28a7-57fe-b26e-6c83a90e91fd") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 15 "/HALL_RAW") + (uuid "4ad0848f-e927-58c8-9d23-8f950e2029e2") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 14 "/HALL") + (uuid "648531c4-ee8b-5790-9afd-740fb564df95") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/11806a6c-034b-55ce-9de9-903f7b99340b") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "62436e35-4a39-5d49-8f93-b73c7f6743de") + (at 170 130 90) + (property "LCSC" "C23138" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "67102eab-d27a-5ccd-9d56-5b1f4878cb76") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R13" + (uuid "1c9fe050-81bc-5809-ae29-1a519d641aab") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "330" + (uuid "a047e441-51b7-5d5a-a90c-f5b04b962d34") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 19 "/LED_BUF") + (uuid "babc0edc-5c07-5aea-bb75-ef6ef8da85c1") + ) + (pad "2" smd roundrect + (at 0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 21 "/LED_DOUT") + (uuid "31753a54-0225-52cc-84ba-29bbaa413160") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/46f59bf6-29cd-5c57-95e3-89e686cca6aa") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "e454e7d4-65b1-5f14-b458-ba3048273527") + (at 134 132.5) + (property "LCSC" "C21190" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7f6209ca-3d56-5e92-af84-dfd6c0a55954") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R14" + (uuid "9d784fec-f038-5eaa-aa96-592e3f5861e4") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1k" + (uuid "20f94cf6-b64f-52ec-9095-8ee0b4fb865c") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "8e2e1928-857a-5de2-9fcf-fe91fc8d28ec") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 22 "/PWR_A") + (uuid "50b8c924-9024-5412-9c3c-92bcdc445c91") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/ce7d6208-8a8a-5871-96f1-a5eff454d35c") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "32d02b52-ad0c-5ae6-af33-66768cc3cf36") + (at 138 132.5) + (property "LCSC" "C21190" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "9cdc0605-8307-5880-8d45-7ea8b4553884") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R15" + (uuid "ed59504c-6140-57a0-bb3f-470163dface5") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "1k" + (uuid "ff94b75b-794a-5ef6-9ac6-749a4c70be73") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 26 "/STAT") + (uuid "09e2e114-0be3-530d-ae2d-b5fa9dad66f7") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 27 "/STAT_A") + (uuid "035d4073-b194-502b-a027-e4d4bc06c659") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/72f891f8-ee6d-51f4-8966-7c74fc42716c") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "9d8a48db-6e15-5488-b3eb-ba310a50cb21") + (at 111.5 145.75) + (property "LCSC" "C23186" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "69d1604d-9f45-5bf6-be37-0ee7153af940") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R2" + (uuid "931bfd84-aa39-5cac-b42a-61b0eb2e9f44") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "5.1k" + (uuid "1e8b7314-01c7-51e4-89f4-eb4d8353eb80") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 7 "/CC2") + (uuid "febe8c24-b931-5b59-85a2-5bcc3ed882fe") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "3ea1e64b-358e-540d-a882-e06a00a37e6e") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/11b33b9a-df3c-580c-9410-8bcb87c6b59b") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "a37a44a2-b6db-5041-b6e0-326625b0ec4c") + (at 131 145 90) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "a397232d-020c-54f3-967c-878125ae5b86") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R3" + (uuid "f509c334-f860-5935-9aa2-701804cfb78c") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "3bbbe9ee-b77b-507d-8221-b4f128182ea6") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 10 "/DTR") + (uuid "aa861747-3afc-5976-ab6e-0c80ba581d38") + ) + (pad "2" smd roundrect + (at 0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 23 "/Q1B") + (uuid "a0b1c448-27d9-56a8-a1c6-8e601cc25dd4") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/361b6a0c-fdf3-5366-a925-bc3597a8da31") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "ed31670d-5596-5cfe-9ef0-7ff4917680bc") + (at 131 149.5 90) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "baa86c78-8539-5e56-b77e-ab237938ef69") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R4" + (uuid "588f010b-814d-5bee-aa8d-a3a9c8954eed") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "dc2251a6-8547-5524-9387-7913ff183c6c") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 25 "/RTS") + (uuid "99c3aec6-d09d-549a-bd0f-422411434298") + ) + (pad "2" smd roundrect + (at 0.825 0 90) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 24 "/Q2B") + (uuid "82afd907-a040-5bfc-9b75-7dd26da6c081") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/95f8ea31-0e5c-5e0f-b4ba-423b07f1ac7c") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "bc823e07-2139-553b-85ca-1de61ecf04c1") + (at 154.6 151) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0afb7d8c-603e-51d6-b698-ac7e1237c966") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R5" + (uuid "81de89b1-470f-50eb-853d-11a0e4f79115") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "0723ce1f-3b3f-57d3-a995-b9ed50d4dccd") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "13d9c074-2287-5ffd-b5a1-eb6974d86140") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 11 "/EN") + (uuid "b2fe5097-0a40-5beb-8bce-3c53f89768e1") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/f0f4b15c-5bad-5c9c-a667-bcf9f833f827") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "e38df896-740b-5a19-8b7f-33e3d2e4b5e8") + (at 131 137.5) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bcdcbb19-f995-5192-973a-15023ac0ca2e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R6" + (uuid "69755257-67a7-55c7-8eff-8dc612fce46d") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "e0b55d9c-a71e-5b13-aec2-4aee74a6fd67") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "73a4f1f0-168d-5b94-aad1-22615a1a8d78") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 18 "/IO0") + (uuid "b4ef2521-3cfe-5472-817c-72d688430c10") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/b767d7de-5928-5314-aed0-83763e967099") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "e41c2099-2342-500f-a03a-3d353eddc4bc") + (at 147 131) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "43962992-b03d-5e49-9f44-499d6331d0ff") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R8" + (uuid "ed285754-5471-5aa9-b2e2-6c11acf134bd") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "f7cc06ed-c5cd-5f1e-96d8-d17291f319ba") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "37471679-ffc2-5544-a1dd-d49e61687521") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 8 "/DRV_EN") + (uuid "a92cd469-535b-5dae-97b1-a3b07e3090e4") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/87628e3d-d60f-5ba2-90a9-e8571c1cee3f") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Resistor_SMD:R_0603_1608Metric" + (layer "F.Cu") + (uuid "3def5c93-8fc4-5fd8-a74d-1d962d932a10") + (at 154 118.5) + (property "LCSC" "C25804" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8b8c4a48-80a3-5c43-8542-232a01a0bf8d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Reference" "R9" + (uuid "f2ab1921-b09c-53b0-bee6-fdd166d192c5") + (at 0 -1.43 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "10k" + (uuid "b03680e4-d139-5a9b-9f44-a4fef08382a4") + (at 0 1.43 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.237258 -0.5225) + (end 0.237258 -0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.237258 0.5225) + (end 0.237258 0.5225) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_rect + (start -1.48 -0.73) + (end 1.48 0.73) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + ) + (fp_rect + (start -0.8 -0.4125) + (end 0.8 0.4125) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (effects + (font + (size 0.4 0.4) + (thickness 0.06) + ) + ) + ) + (pad "1" smd roundrect + (at -0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "507a6bc6-47c9-56ee-ad12-4d3dfc759dfe") + ) + (pad "2" smd roundrect + (at 0.825 0) + (size 0.8 0.95) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 17 "/HOME_RAW") + (uuid "5597b640-3e52-5b6f-9555-f4d59c70a160") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/fdca50db-642f-568f-ac2f-0a3fcf029fb9") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Button_Switch_SMD:SW_SPST_B3U-1000P" + (layer "F.Cu") + (uuid "07f46896-b81d-58fc-8c09-04e8881657a6") + (at 127.5 155) + (property "LCSC" "C231329" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "5ffe2ab1-0ee0-51dd-a5a2-d8577845f68c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, without Boss") + (tags "Tactile Switch") + (property "Reference" "SW1" + (at 0 2.7 0) + (layer "F.SilkS") + (uuid "e56ff9ca-74d7-4aa3-8111-533a5ee32933") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "RESET" + (at 0 2.5 0) + (layer "F.Fab") + (uuid "a786f27e-1ab5-47e2-b000-faa5fc44f3aa") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "8c197b0c-cea6-4c47-a225-322399bfaee3") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "e0ba27b1-1f99-49b5-8a9c-5cf571a9795c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.65 -1.4) + (end 1.65 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0e11df53-f8ee-43ce-93b4-3c90d3d22c5c") + ) + (fp_line + (start -1.65 -1.1) + (end -1.65 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "75f2296d-b0af-40b7-a7ae-3583b9f751e7") + ) + (fp_line + (start -1.65 1.1) + (end -1.65 1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7606794f-94b1-4b7c-9aab-06201525eb9b") + ) + (fp_line + (start -1.65 1.4) + (end 1.65 1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "5616da4a-8ed8-4011-921b-cd43949918e7") + ) + (fp_line + (start 1.65 -1.4) + (end 1.65 -1.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "705a451f-c08f-4aa5-aa9c-8fcf274e5428") + ) + (fp_line + (start 1.65 1.4) + (end 1.65 1.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b43c1010-b7f4-4abc-8ebc-c2e4f2484a6f") + ) + (fp_line + (start -2.4 -1.65) + (end -2.4 1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7833e4a1-0304-4444-8f84-b8edbf518fcf") + ) + (fp_line + (start -2.4 1.65) + (end 2.4 1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2581f53c-f7e0-40b8-8870-3a4da1d2dbc0") + ) + (fp_line + (start 2.4 -1.65) + (end -2.4 -1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "79cb4ec8-1000-4659-bc94-d06d6d6efe6e") + ) + (fp_line + (start 2.4 1.65) + (end 2.4 -1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f5c54de1-e2a8-4db1-94ec-36f52a2b3bf5") + ) + (fp_line + (start -1.5 -1.25) + (end 1.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0a332110-eeed-4bb6-87c5-62011a75ac14") + ) + (fp_line + (start -1.5 1.25) + (end -1.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3de81bd5-2500-4819-bd11-f02b4544c28b") + ) + (fp_line + (start 1.5 -1.25) + (end 1.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7566e90f-6899-4152-9345-77c96692f19f") + ) + (fp_line + (start 1.5 1.25) + (end -1.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b8fe5f89-c5d9-4130-b4a4-4f66c371753d") + ) + (fp_circle + (center 0 0) + (end 0.75 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "950f98fb-a768-43cf-957b-3a4fad696344") + ) + (fp_text user "${REFERENCE}" + (at 0 -2.5 0) + (layer "F.Fab") + (uuid "b618111c-4d85-41dc-be76-621aed6ccefc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd rect + (at -1.7 0) + (size 0.9 1.7) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "f5178655-4ae4-4e7c-b5bb-a79d990d08a6") + (net 11 "/EN") + (uuid "ab58c045-1b32-5f80-9cb8-ee444bb0b679") + ) + (pad "2" smd rect + (at 1.7 0) + (size 0.9 1.7) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "6f994d3d-2800-47d5-b256-665b170cf7f7") + (net 1 "/GND") + (uuid "a52764e4-092e-58e0-aaef-2827076b90bd") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_B3U-1000P.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/1abe3ec4-5aa3-51bb-b2c6-96932b03128b") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Button_Switch_SMD:SW_SPST_B3U-1000P" + (layer "F.Cu") + (uuid "67a147ab-579b-586d-b9c7-1179e6435170") + (at 122 155) + (property "LCSC" "C231329" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "369f956b-ddd5-57d3-b664-fe1e8d8bbc2f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, without Boss") + (tags "Tactile Switch") + (property "Reference" "SW2" + (at 0 -2.5 0) + (layer "F.SilkS") + (uuid "e56ff9ca-74d7-4aa3-8111-533a5ee32933") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "BOOT" + (at 0 2.5 0) + (layer "F.Fab") + (uuid "a786f27e-1ab5-47e2-b000-faa5fc44f3aa") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "8c197b0c-cea6-4c47-a225-322399bfaee3") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "e0ba27b1-1f99-49b5-8a9c-5cf571a9795c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.65 -1.4) + (end 1.65 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0e11df53-f8ee-43ce-93b4-3c90d3d22c5c") + ) + (fp_line + (start -1.65 -1.1) + (end -1.65 -1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "75f2296d-b0af-40b7-a7ae-3583b9f751e7") + ) + (fp_line + (start -1.65 1.1) + (end -1.65 1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "7606794f-94b1-4b7c-9aab-06201525eb9b") + ) + (fp_line + (start -1.65 1.4) + (end 1.65 1.4) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "5616da4a-8ed8-4011-921b-cd43949918e7") + ) + (fp_line + (start 1.65 -1.4) + (end 1.65 -1.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "705a451f-c08f-4aa5-aa9c-8fcf274e5428") + ) + (fp_line + (start 1.65 1.4) + (end 1.65 1.1) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "b43c1010-b7f4-4abc-8ebc-c2e4f2484a6f") + ) + (fp_line + (start -2.4 -1.65) + (end -2.4 1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7833e4a1-0304-4444-8f84-b8edbf518fcf") + ) + (fp_line + (start -2.4 1.65) + (end 2.4 1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2581f53c-f7e0-40b8-8870-3a4da1d2dbc0") + ) + (fp_line + (start 2.4 -1.65) + (end -2.4 -1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "79cb4ec8-1000-4659-bc94-d06d6d6efe6e") + ) + (fp_line + (start 2.4 1.65) + (end 2.4 -1.65) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f5c54de1-e2a8-4db1-94ec-36f52a2b3bf5") + ) + (fp_line + (start -1.5 -1.25) + (end 1.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0a332110-eeed-4bb6-87c5-62011a75ac14") + ) + (fp_line + (start -1.5 1.25) + (end -1.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3de81bd5-2500-4819-bd11-f02b4544c28b") + ) + (fp_line + (start 1.5 -1.25) + (end 1.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7566e90f-6899-4152-9345-77c96692f19f") + ) + (fp_line + (start 1.5 1.25) + (end -1.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "b8fe5f89-c5d9-4130-b4a4-4f66c371753d") + ) + (fp_circle + (center 0 0) + (end 0.75 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "950f98fb-a768-43cf-957b-3a4fad696344") + ) + (fp_text user "${REFERENCE}" + (at 0 -2.5 0) + (layer "F.Fab") + (uuid "b618111c-4d85-41dc-be76-621aed6ccefc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd rect + (at -1.7 0) + (size 0.9 1.7) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "f5178655-4ae4-4e7c-b5bb-a79d990d08a6") + (net 18 "/IO0") + (uuid "6ab349a1-3ec3-5acc-a980-9a7140c485bb") + ) + (pad "2" smd rect + (at 1.7 0) + (size 0.9 1.7) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "6f994d3d-2800-47d5-b256-665b170cf7f7") + (net 1 "/GND") + (uuid "8091d330-2b6e-58bc-8c56-35b1e61026fb") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_B3U-1000P.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/5cf58b67-333f-5e2a-893e-34255fef1ee7") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "RF_Module:ESP32-WROOM-32E" + (layer "F.Cu") + (uuid "4c7ad107-676c-5d3d-be5c-bc1c308946b4") + (at 143 150.59 180) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ad52f188-11b7-5819-bef7-0090923fad89") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "2.4 GHz Wi­-Fi and Bluetooth 5 (LE) module: https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf") + (tags "Bluetooth WiFi Wi-Fi ESP32 WROOM Xtensa LX6") + (property "Reference" "U1" + (at -10.5 13.5 0) + (layer "F.SilkS") + (uuid "6061ecd3-0cf8-4046-9ce3-82ecb6993515") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify left) + ) + ) + (property "Value" "ESP32-WROOM-32E-N8" + (at 0 14.5 0) + (layer "F.Fab") + (uuid "baab5e21-f062-46e2-be45-b446bf5b894c") + (effects + (font + (size 0.9 0.9) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "f420f95b-1617-46ac-9746-a9dbd9f31bd5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "5cfdf0aa-8858-4a1c-bb26-68cf6f79703b") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -9.2 12.95) + (end -9.2 12) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "a4b669ee-9518-4f2f-bfdc-03148cc2b4fd") + ) + (fp_line + (start -7.8 12.95) + (end -9.2 12.95) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "096aeaa0-c10f-4f21-828c-e4348cf8a588") + ) + (fp_line + (start 7.8 12.95) + (end 9.2 12.95) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "eecac9da-c07f-413d-aed4-9abe8346f038") + ) + (fp_line + (start 9.2 12.95) + (end 9.2 12) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "4707d851-649e-4387-919b-53dc34fe39f0") + ) + (fp_poly + (pts + (xy -9.2 -6) + (xy -9.7 -6) + (xy -9.2 -6.5) + (xy -9.2 -6) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + (uuid "c1eb111e-b8ac-4c8f-9a03-9fe757631ec7") + ) + (fp_poly + (pts + (xy -24.25 -28) + (xy 24.25 -28) + (xy 24.25 -6.31) + (xy 9.75 -6.31) + (xy 9.75 13.54) + (xy -9.75 13.54) + (xy -9.75 -6.31) + (xy -24.25 -6.31) + ) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "8268eeb2-ce71-4802-8031-b3df26ba0a06") + ) + (fp_line + (start -9 -12.75) + (end 9 -12.75) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3a9f88c5-c3ce-4470-a940-4ca3add49d80") + ) + (fp_line + (start -9 -6.56) + (end -9 -12.75) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "a54b9094-38e0-4d2c-a567-4d0bdb61e2db") + ) + (fp_line + (start 9 -12.75) + (end 9 -6.56) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "8b370f59-36f6-438e-83c5-3bed3ef74482") + ) + (fp_rect + (start -9 -6.56) + (end 9 12.75) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "6d2613c8-2be8-4d41-809d-52158ba110a1") + ) + (fp_poly + (pts + (xy -5 -9.75) + (xy -3 -9.75) + (xy -3 -12.25) + (xy 0 -12.25) + (xy 0 -9.75) + (xy 2 -9.75) + (xy 2 -12.25) + (xy 7.5 -12.25) + (xy 7.5 -6.75) + (xy 7 -6.75) + (xy 7 -11.75) + (xy 5 -11.75) + (xy 5 -6.75) + (xy 4.5 -6.75) + (xy 4.5 -11.75) + (xy 2.5 -11.75) + (xy 2.5 -9.25) + (xy -0.5 -9.25) + (xy -0.5 -11.75) + (xy -2.5 -11.75) + (xy -2.5 -9.25) + (xy -5.5 -9.25) + (xy -5.5 -11.75) + (xy -7.5 -11.75) + (xy -7.5 -8.25) + (xy -8 -8.25) + (xy -8 -12.25) + (xy -5 -12.25) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill yes) + (layer "F.Fab") + (uuid "2321df2f-9a58-433d-a5e7-84e7c5c56a3a") + ) + (fp_text user "${REFERENCE}" + (at 0 -1 0) + (layer "F.Fab") + (uuid "263ff581-2132-48f1-8b01-0ccace8bfbba") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd rect + (at -8.75 -5.26 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "1bd7944f-be9d-451a-aa42-3967010b7c19") + (net 1 "/GND") + (uuid "171713fe-d428-54b6-8844-ee33aef09378") + ) + (pad "2" smd rect + (at -8.75 -3.99 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "00117d8e-0e8d-444b-a1f3-f4978d47d9b3") + (net 3 "/+3V3") + (uuid "4a7568bb-4a8f-5dd7-8493-736a08b46cdb") + ) + (pad "3" smd rect + (at -8.75 -2.72 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "91ca2eda-da62-4e31-b5ef-380eeadd5000") + (net 11 "/EN") + (uuid "0bee4d95-2ae2-5969-894b-95c63ac7234e") + ) + (pad "4" smd rect + (at -8.75 -1.45 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "2686b64b-b117-4477-93b4-ce60fdcd9cc5") + (net 67 "unconnected-(U1-SENSOR_VP-Pad4)") + (uuid "94208bda-d988-5868-9df6-b9809d439e6e") + ) + (pad "5" smd rect + (at -8.75 -0.18 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "794e3ab7-bd2d-44e8-86f4-4cb341674aa9") + (net 66 "unconnected-(U1-SENSOR_VN-Pad5)") + (uuid "664270b6-5432-5edf-aff8-22e2a61603ce") + ) + (pad "6" smd rect + (at -8.75 1.09 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c9cd98db-7e4d-40a5-8665-084a8c17d2ba") + (net 16 "/HOME") + (uuid "2821827c-6c44-5b23-9daf-5d0c8d7bc88b") + ) + (pad "7" smd rect + (at -8.75 2.36 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "0ae96d54-8e1d-4b64-a8af-e9c017ed7421") + (net 14 "/HALL") + (uuid "108f6fc8-b360-58cc-a6b3-58b639b75a75") + ) + (pad "8" smd rect + (at -8.75 3.63 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "1ca0da5b-186e-4c73-9e08-80816cd57c3e") + (net 13 "/EXP_IO32") + (uuid "3a6a54ec-1b26-5664-86a6-d62a03ccac4e") + ) + (pad "9" smd rect + (at -8.75 4.9 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "9cafe792-c1f7-4977-b804-edb98a3a182b") + (net 20 "/LED_DATA") + (uuid "7c5b6425-4043-5338-b17d-2cde6272742d") + ) + (pad "10" smd rect + (at -8.75 6.17 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "e61148d5-71cf-4624-90e2-ff3dbad1b9e1") + (net 12 "/EXP_IO25") + (uuid "1e2d7a2f-ff8d-5364-ae5c-ec22661583d4") + ) + (pad "11" smd rect + (at -8.75 7.44 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "04db5ea8-45c7-4ac8-980e-cfac02b827e8") + (net 56 "unconnected-(U1-IO26-Pad11)") + (uuid "fc23ce3f-ae42-5e7d-92e1-25b40e8c790f") + ) + (pad "12" smd rect + (at -8.75 8.71 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "58a3c98d-76e8-4c99-a8ce-0d6d75cc8c7c") + (net 46 "/Y_STEP") + (uuid "0d9f84af-b60c-5ab4-9a67-3d5425767aac") + ) + (pad "13" smd rect + (at -8.75 9.98 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "7e5ce69e-18e7-4931-bb46-7c9dc6e0e941") + (net 45 "/Y_DIR") + (uuid "fe3470ce-e115-57bf-abae-cfee2763c75f") + ) + (pad "14" smd rect + (at -8.75 11.25 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "3cd7ed2b-c450-450e-936e-7c0f0e734b4d") + (net 49 "unconnected-(U1-IO12-Pad14)") + (uuid "0a1c5e5b-bedd-5b3e-8b08-b6cee475814f") + ) + (pad "15" smd rect + (at -5.715 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "09ac19f1-8843-473a-8db7-f17f798d1427") + (net 1 "/GND") + (uuid "00da8d49-ffa1-5f29-a84b-60dd201ae543") + ) + (pad "16" smd rect + (at -4.445 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c3a85e10-30b8-4774-b039-1ce64878785f") + (net 8 "/DRV_EN") + (uuid "52837b74-f989-5208-a5ce-a6a3df7d8105") + ) + (pad "17" smd rect + (at -3.175 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "7f185524-599a-42ad-bc27-e369217d213b") + (net 59 "unconnected-(U1-NC-Pad17)") + (uuid "2fefcb83-ddd9-5d5a-8349-60905d38a1fb") + ) + (pad "18" smd rect + (at -1.905 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "214e7d56-0045-4455-9f46-6b2f57a41cd3") + (net 60 "unconnected-(U1-NC-Pad18)") + (uuid "b5885202-50b2-5f50-bfa8-f65fa70a26b6") + ) + (pad "19" smd rect + (at -0.635 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "12741a6e-4604-43e7-ab0a-6421b6ae053f") + (net 61 "unconnected-(U1-NC-Pad19)") + (uuid "b30e0925-8ca7-54f1-87e0-da050cf51942") + ) + (pad "20" smd rect + (at 0.635 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "84adfd0c-f05c-4154-b92b-0680dc137f7d") + (net 62 "unconnected-(U1-NC-Pad20)") + (uuid "e0e5cae4-7e32-5231-b7c8-8efca531f619") + ) + (pad "21" smd rect + (at 1.905 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "ffda12c1-9487-4b14-8d72-661b48c27e1b") + (net 63 "unconnected-(U1-NC-Pad21)") + (uuid "58d8f263-d1f1-5fc1-aed5-e4241fc5692c") + ) + (pad "22" smd rect + (at 3.175 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "1966bc1d-685b-4227-b62d-6466fa415482") + (net 64 "unconnected-(U1-NC-Pad22)") + (uuid "f3c60052-5977-5010-9e48-e34e301b7aac") + ) + (pad "23" smd rect + (at 4.445 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "f211a9cb-7289-4d78-b282-cf7821210735") + (net 50 "unconnected-(U1-IO15-Pad23)") + (uuid "2dbd0d6b-951b-5aac-ad37-493222a6f16a") + ) + (pad "24" smd rect + (at 5.715 12.5 270) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "ad9e9b5c-a1a3-45f4-a01f-5e77c3f309a3") + (net 26 "/STAT") + (uuid "2f7c9c7c-1bf0-5b58-821e-98bc854fccda") + ) + (pad "25" smd rect + (at 8.75 11.25 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "3258a05b-ce27-4d91-b8c2-261e029b1392") + (net 18 "/IO0") + (uuid "5253379d-a847-5df5-8170-43d37b168e3f") + ) + (pad "26" smd rect + (at 8.75 9.98 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c624fb84-f402-4a8e-b962-ba20aa89de98") + (net 57 "unconnected-(U1-IO4-Pad26)") + (uuid "a58e49bc-5483-50a3-bcd4-507ab438d5a3") + ) + (pad "27" smd rect + (at 8.75 8.71 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "c92753be-49ac-455f-aa5d-13fd26901862") + (net 51 "unconnected-(U1-IO16-Pad27)") + (uuid "2cd97fe4-84cc-52b6-bd08-80287befaf47") + ) + (pad "28" smd rect + (at 8.75 7.44 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "ccc41bc7-3d13-4b70-b3b4-c7cec91e3b45") + (net 52 "unconnected-(U1-IO17-Pad28)") + (uuid "94dda3f9-1e1b-596e-b637-c631d532cd9e") + ) + (pad "29" smd rect + (at 8.75 6.17 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "e4d0f92e-c25a-4ff4-b1fb-7251025c4967") + (net 58 "unconnected-(U1-IO5-Pad29)") + (uuid "78b311e8-3dfe-5d04-837a-dfef7e012c56") + ) + (pad "30" smd rect + (at 8.75 4.9 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "895699e9-3c04-445a-b169-a7e578af16e2") + (net 40 "/X_STEP") + (uuid "98fed87d-1a29-503c-a76c-ffcd20b78dac") + ) + (pad "31" smd rect + (at 8.75 3.63 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "208f540b-63e2-4482-b989-1c21ef6541ed") + (net 39 "/X_DIR") + (uuid "df497679-4d22-58d0-aad9-750c37b20d3d") + ) + (pad "32" smd rect + (at 8.75 2.36 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "4cb5aeb8-5597-433f-b523-e9eb0ce4b74f") + (net 65 "unconnected-(U1-NC-Pad32)") + (uuid "df89dc1b-a3ff-5e92-bdb7-1cba5362bbe2") + ) + (pad "33" smd rect + (at 8.75 1.09 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "4030bb27-6bab-4b3b-9dc4-8147cff47580") + (net 53 "unconnected-(U1-IO21-Pad33)") + (uuid "c44c51f7-08c8-5aae-b0a0-5f854eadf1d5") + ) + (pad "34" smd rect + (at 8.75 -0.18 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "3c2dfa5b-bca7-485d-8ac2-0490caf8f423") + (net 28 "/U0RXD") + (uuid "dbefdcd0-61ab-5e01-83ec-c91d2d72403d") + ) + (pad "35" smd rect + (at 8.75 -1.45 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "944e43b2-2724-43b5-a4e9-cb4bfabcca01") + (net 29 "/U0TXD") + (uuid "7b74701a-eb83-57b8-ac32-6deaedfc2dec") + ) + (pad "36" smd rect + (at 8.75 -2.72 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "aea91c2b-5619-4c2d-95e1-00ab2c53b95e") + (net 54 "unconnected-(U1-IO22-Pad36)") + (uuid "c3808808-3801-5d91-84ec-f550e82888fb") + ) + (pad "37" smd rect + (at 8.75 -3.99 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "a1c7862f-f61f-429f-8bfb-54e911fcb4c5") + (net 55 "unconnected-(U1-IO23-Pad37)") + (uuid "57678c4f-5185-5ae2-a11d-ed9e0327dbd1") + ) + (pad "38" smd rect + (at 8.75 -5.26 180) + (size 1.5 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (uuid "70aebf0b-4ef0-48ad-b944-2a511ec10266") + (net 1 "/GND") + (uuid "98b19ffc-fdb9-507e-8bf1-61ccd4a962ba") + ) + (pad "39" smd rect + (at -1.5 2.46 180) + (size 3.7 3.7) + (property pad_prop_heatsink) + (layers "F.Cu") + (zone_connect 2) + (net 1 "/GND") + (uuid "06530431-8bcf-5608-88e2-9e551ed76d33") + ) + (pad "39" smd rect + (at -2.9 1.06 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "2a79540c-e9f3-4c56-b697-b3574c1c3c5e") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -2.9 2.46 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "6fb3a553-b08e-4c2b-b985-68a1771cf673") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -2.9 3.86 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "0d38cf24-9fe9-4560-b25e-f7f29e858302") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -1.5 1.06 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "8ccb6e04-98b6-4e38-bb17-634d04f08b1e") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -1.5 2.46 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "5f10cd5f-8266-4a41-bb47-c1dfbc7b8f0d") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -1.5 3.86 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "20238581-146b-48fd-8869-c8cac548f27c") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -0.1 1.06 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "cc130642-720d-4987-90aa-5d333f991c42") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -0.1 2.46 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "f42d5508-edc1-40d6-ae33-ac51fbcc9d3a") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (pad "39" smd rect + (at -0.1 3.86 180) + (size 0.9 0.9) + (property pad_prop_heatsink) + (layers "F.Cu" "F.Mask" "F.Paste") + (zone_connect 2) + (uuid "2227fd0f-b48d-4c14-8f48-80e960588b32") + (net 1 "/GND") + (uuid "cbec0955-a9c4-5f80-a21c-1e8bf5491c2a") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/RF_Module.3dshapes/ESP32-WROOM-32E.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/7cd83c1e-c6b7-5a66-a779-e12a7ddc11b2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" + (layer "F.Cu") + (uuid "dad623b4-cbcd-523c-ad44-7c007700e145") + (at 122 147) + (property "LCSC" "C84681" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d87981aa-067f-577c-b3af-5bf9dbd1e52a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOIC, 16 Pin (JEDEC MS-012, variation AC, https://www.jedec.org/document_search?search_api_views_fulltext=MS-012, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOIC SO 16-pin-NSOP R-16 R-16-S D0016A M2B SO16 SOT109-1 751B SOIC_N narrow") + (property "Reference" "U2" + (uuid "3ad5e655-4fdf-5324-acd8-5a5fb2972dc3") + (at 0 -5.9 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "CH340C" + (uuid "d862b92a-0017-596e-9536-89c3dd59369a") + (at 0 5.9 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -2.06 -5.06) + (end 2.06 -5.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.06 -5.005) + (end -2.06 -5.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -2.06 5.06) + (end -2.06 5.005) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 2.06 -5.06) + (end 2.06 -5.005) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 2.06 5.005) + (end 2.06 5.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 2.06 5.06) + (end -2.06 5.06) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -2.6 -5.01) + (xy -2.84 -5.34) + (xy -2.36 -5.34) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -3.7 -5) + (end -2.2 -5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -3.7 5) + (end -3.7 -5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.2 -5.2) + (end 2.2 -5.2) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.2 -5) + (end -2.2 -5.2) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.2 5) + (end -3.7 5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.2 5.2) + (end -2.2 5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.2 -5.2) + (end 2.2 -5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.2 -5) + (end 3.7 -5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.2 5) + (end 2.2 5.2) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.2 5.2) + (end -2.2 5.2) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 3.7 -5) + (end 3.7 5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 3.7 5) + (end 2.2 5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.975 -4.95) + (xy 1.95 -4.95) + (xy 1.95 4.95) + (xy -1.95 4.95) + (xy -1.95 -3.975) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" smd roundrect + (at -2.475 -4.445) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "30e60c26-f4b9-5e02-8be2-b49640d6c6b4") + ) + (pad "2" smd roundrect + (at -2.475 -3.175) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 28 "/U0RXD") + (uuid "4ef9538a-5fca-5309-9b89-4ecf452439d1") + ) + (pad "3" smd roundrect + (at -2.475 -1.905) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 29 "/U0TXD") + (uuid "b2e8fcd0-debb-5706-beb7-fef05a3f42dd") + ) + (pad "4" smd roundrect + (at -2.475 -0.635) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "1625d485-d76a-5885-bcf3-16881b2f840e") + ) + (pad "5" smd roundrect + (at -2.475 0.635) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 31 "/USB_DP") + (uuid "d1c66cec-edd9-58c8-b15d-1ab0447f4284") + ) + (pad "6" smd roundrect + (at -2.475 1.905) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 30 "/USB_DM") + (uuid "23cfb33c-76aa-58fa-a306-979f086bb931") + ) + (pad "7" smd roundrect + (at -2.475 3.175) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 68 "unconnected-(U2-NC-Pad7)") + (uuid "1c174948-302a-5e37-9975-886782452fc7") + ) + (pad "8" smd roundrect + (at -2.475 4.445) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 69 "unconnected-(U2-NC-Pad8)") + (uuid "89cb3909-0811-5e0e-b881-d4d908147a97") + ) + (pad "9" smd roundrect + (at 2.475 4.445) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 71 "unconnected-(U2-~{CTS}-Pad9)") + (uuid "3913fab7-3d8d-5bc3-a3e8-04c244192f80") + ) + (pad "10" smd roundrect + (at 2.475 3.175) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 73 "unconnected-(U2-~{DSR}-Pad10)") + (uuid "3f46259f-ed07-5fc4-a464-b3433ac4a261") + ) + (pad "11" smd roundrect + (at 2.475 1.905) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 74 "unconnected-(U2-~{RI}-Pad11)") + (uuid "730fe26f-6325-5704-81ed-0ff45b715442") + ) + (pad "12" smd roundrect + (at 2.475 0.635) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 72 "unconnected-(U2-~{DCD}-Pad12)") + (uuid "7326246d-1e9b-5148-89c5-09b331541276") + ) + (pad "13" smd roundrect + (at 2.475 -0.635) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 10 "/DTR") + (uuid "7debfb9d-c1ec-5aef-be72-d25ac3e7bf0c") + ) + (pad "14" smd roundrect + (at 2.475 -1.905) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 25 "/RTS") + (uuid "42d98ab9-dc7a-53f8-aca5-add3fe03bb23") + ) + (pad "15" smd roundrect + (at 2.475 -3.175) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 70 "unconnected-(U2-R232-Pad15)") + (uuid "fa84d197-61f1-567d-8c97-c6af210a8b7d") + ) + (pad "16" smd roundrect + (at 2.475 -4.445) + (size 1.95 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 3 "/+3V3") + (uuid "5ce6e0ed-d7bf-5960-9f63-28215f9446b9") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-16_3.9x9.9mm_P1.27mm.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/ae46ffd7-7a16-5ced-a31e-415062575590") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" + (layer "F.Cu") + (uuid "f4fb018d-8fb8-5738-b9a8-1f706d714830") + (at 166 141.5) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e115f1b5-a27c-55c8-986f-de6af4c0f5ba") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "module CMS SOT223 4 pins") + (tags "CMS SOT") + (property "Reference" "U3" + (at 0 -4.5 0) + (layer "F.SilkS") + (uuid "095b50a5-76ce-476b-aa10-37a37fa441f1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "AP7361C-33E" + (at 0 4.5 0) + (layer "F.Fab") + (uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "0fecb949-4744-4c65-8091-70f595847ba4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "" + (at 0 0 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "7dd6192e-e612-428f-816e-6f28697542d5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -1.85 -3.41) + (end 1.91 -3.41) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d") + ) + (fp_line + (start -1.85 3.41) + (end 1.91 3.41) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "6e43f798-7915-403c-b947-4851bde35045") + ) + (fp_line + (start 1.91 -3.41) + (end 1.91 -2.15) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "ddfc40c4-e33c-493e-b735-24282440d539") + ) + (fp_line + (start 1.91 3.41) + (end 1.91 2.15) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "79366377-6a9f-460a-b0d1-788467590954") + ) + (fp_poly + (pts + (xy -3.13 -3.31) + (xy -3.37 -3.64) + (xy -2.89 -3.64) + (xy -3.13 -3.31) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + (uuid "27420593-f422-495a-9e17-88a99bcd8a3d") + ) + (fp_line + (start -4.4 -3.6) + (end -4.4 3.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2d708b29-208a-4760-a2c5-6626e4d03d29") + ) + (fp_line + (start -4.4 3.6) + (end 4.4 3.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270") + ) + (fp_line + (start 4.4 -3.6) + (end -4.4 -3.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d963e7fb-b321-4298-bcd6-9650f5938938") + ) + (fp_line + (start 4.4 3.6) + (end 4.4 -3.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "18839f08-10e9-4a73-9312-8be172f09091") + ) + (fp_line + (start -1.85 -2.35) + (end -1.85 3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc") + ) + (fp_line + (start -1.85 -2.35) + (end -0.85 -3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f393364a-2641-4746-ba4c-6509ea1de503") + ) + (fp_line + (start -1.85 3.35) + (end 1.85 3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "27db54e0-f4a8-4972-bcbc-256787416dcd") + ) + (fp_line + (start -0.85 -3.35) + (end 1.85 -3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "be579ebe-38db-4860-98f0-9f530f704760") + ) + (fp_line + (start 1.85 -3.35) + (end 1.85 3.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (pad "1" smd roundrect + (at -3.15 -2.3) + (size 2 1.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448") + (net 4 "/+5V") + (uuid "ec269813-7c7f-5891-be62-ea24ae12eb4d") + ) + (pad "2" smd roundrect + (at -3.15 0) + (size 2 1.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8") + (net 1 "/GND") + (uuid "ceecb2a5-4c16-51b1-932d-d9f0710eb663") + ) + (pad "2" smd roundrect + (at 3.15 0) + (size 2 3.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e") + (net 1 "/GND") + (uuid "ceecb2a5-4c16-51b1-932d-d9f0710eb663") + ) + (pad "3" smd roundrect + (at -3.15 2.3) + (size 2 1.5) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "5046df04-2b74-45a5-867e-e33a5e51e59c") + (net 3 "/+3V3") + (uuid "4a1908a0-fad9-5454-98ee-f74fb4c420be") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/d4a02e29-917d-50de-86ba-f0a34c73b816") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-23-5" + (layer "F.Cu") + (uuid "fbccb7b0-7bcf-5dec-9b66-2aaff9aaa175") + (at 165.5 130) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "98b456c0-43a9-5442-8836-47113cfc5771") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOT, 5 Pin (JEDEC MO-178 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-178), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOT TO_SOT_SMD") + (property "Reference" "U4" + (uuid "061ad332-d919-5c44-9250-f2508b7492b9") + (at 0 -2.4 0) + (layer "F.SilkS") + (effects + (font + (size 0.7 0.7) + (thickness 0.1) + ) + ) + ) + (property "Value" "74AHCT1G125" + (uuid "7ef42316-c277-51ea-8faa-1f499b7fd48d") + (at 0 2.4 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.91 -1.56) + (end 0.91 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.91 -1.51) + (end -0.91 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.91 1.56) + (end -0.91 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 -1.56) + (end 0.91 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 -0.39) + (end 0.91 0.39) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 1.51) + (end 0.91 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 1.56) + (end -0.91 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -1.45 -1.51) + (xy -1.69 -1.84) + (xy -1.21 -1.84) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -2.05 -1.5) + (end -1.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.05 1.5) + (end -2.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 -1.7) + (end 1.05 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 -1.5) + (end -1.05 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 1.5) + (end -2.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 1.7) + (end -1.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 -1.7) + (end 1.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 -1.5) + (end 2.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 -0.39) + (end 1.05 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 0.39) + (end 2.05 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 1.5) + (end 1.05 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 1.7) + (end -1.05 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 -1.5) + (end 2.05 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 -0.39) + (end 1.05 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 0.39) + (end 2.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 1.5) + (end 1.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.4 -1.45) + (xy 0.8 -1.45) + (xy 0.8 1.45) + (xy -0.8 1.45) + (xy -0.8 -1.05) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 0.72 0.72) + (thickness 0.11) + ) + ) + ) + (pad "1" smd roundrect + (at -1.1375 -0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "a9705570-2c06-51ff-b770-decc19f5e66e") + ) + (pad "2" smd roundrect + (at -1.1375 0) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 20 "/LED_DATA") + (uuid "a32b462b-accb-58cd-841e-e56218701072") + ) + (pad "3" smd roundrect + (at -1.1375 0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "69a285c5-4ac4-55cc-8e56-15d0645d5274") + ) + (pad "4" smd roundrect + (at 1.1375 0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 19 "/LED_BUF") + (uuid "a18aa55d-47ad-571a-bb90-4b7e5501697e") + ) + (pad "5" smd roundrect + (at 1.1375 -0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 4 "/+5V") + (uuid "772927f1-027d-5c33-aa4e-56c022828e9f") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/f710d186-b3dd-51fc-8a27-8c527bde241d") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (footprint "Package_TO_SOT_SMD:SOT-23-6" + (layer "F.Cu") + (uuid "e5c80dea-0e75-5563-b139-60c007cf3689") + (at 113 149.5) + (property "LCSC" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "5cc8db61-104b-5302-95ee-d998836a59ed") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (descr "SOT, 6 Pin (JEDEC MO-178 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-178), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOT TO_SOT_SMD") + (property "Reference" "U5" + (uuid "997f3f27-0984-5e62-907e-64f893c9e34e") + (at 0 -2.4 0) + (layer "F.SilkS") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "USBLC6-2SC6" + (uuid "83fb635e-5b8d-5766-8b83-568ae88195e4") + (at 0 2.4 0) + (layer "F.Fab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (attr smd) + (fp_line + (start -0.91 -1.56) + (end 0.91 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.91 -1.51) + (end -0.91 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start -0.91 1.56) + (end -0.91 1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 -1.56) + (end 0.91 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 1.51) + (end 0.91 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_line + (start 0.91 1.56) + (end -0.91 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + ) + (fp_poly + (pts + (xy -1.45 -1.51) + (xy -1.69 -1.84) + (xy -1.21 -1.84) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "F.SilkS") + ) + (fp_line + (start -2.05 -1.5) + (end -1.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -2.05 1.5) + (end -2.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 -1.7) + (end 1.05 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 -1.5) + (end -1.05 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 1.5) + (end -2.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start -1.05 1.7) + (end -1.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 -1.7) + (end 1.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 -1.5) + (end 2.05 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 1.5) + (end 1.05 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 1.05 1.7) + (end -1.05 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 -1.5) + (end 2.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_line + (start 2.05 1.5) + (end 1.05 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + ) + (fp_poly + (pts + (xy -0.4 -1.45) + (xy 0.8 -1.45) + (xy 0.8 1.45) + (xy -0.8 1.45) + (xy -0.8 -1.05) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "F.Fab") + (effects + (font + (size 0.72 0.72) + (thickness 0.11) + ) + ) + ) + (pad "1" smd roundrect + (at -1.1375 -0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 31 "/USB_DP") + (uuid "5eed875e-1efa-54f4-b6ef-d5ed01d596df") + ) + (pad "2" smd roundrect + (at -1.1375 0) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 1 "/GND") + (uuid "2dbf0cab-34e3-5ba7-8c88-43b15bb50add") + ) + (pad "3" smd roundrect + (at -1.1375 0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 30 "/USB_DM") + (uuid "acb560f0-6293-5a26-8bcb-2a8182890b97") + ) + (pad "4" smd roundrect + (at 1.1375 0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 30 "/USB_DM") + (uuid "10d19a94-9535-5194-b1a1-97919d003b99") + ) + (pad "5" smd roundrect + (at 1.1375 0) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 32 "/VBUS") + (uuid "261d46eb-5315-5ada-ab4e-97ca1f8a16c1") + ) + (pad "6" smd roundrect + (at 1.1375 -0.95) + (size 1.325 0.6) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net 31 "/USB_DP") + (uuid "1109bfba-24b5-57e9-9fd8-f07e6396ba6b") + ) + (embedded_fonts no) + (model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + (path "/63463f95-bc81-5b80-9847-846553ad8cf2") + (sheetname "/") + (sheetfile "sandtable-controller.kicad_sch") + ) + (gr_rect + (start 100 100) + (end 180 163.34) + (stroke + (width 0.05) + (type default) + ) + (fill no) + (layer "Edge.Cuts") + (uuid "53c46d28-bda7-5d4c-9b58-294289f37b27") + ) + (gr_text "SANDTABLE" + (at 153.8 127.6 0) + (layer "F.SilkS") + (uuid "58a508d1-de92-5d35-bf14-4ac1b4c32eb2") + (effects + (font + (size 1.1 1.1) + (thickness 0.165) + (bold yes) + ) + ) + ) + (gr_text "CTRL v0.4" + (at 153.8 129.6 0) + (layer "F.SilkS") + (uuid "abc75593-029c-5788-9e3e-50e39bf74486") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SPIN" + (at 104.5 115.2 0) + (layer "F.SilkS") + (uuid "8b9978ec-b48b-544a-9de6-2209d4d75ae7") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "12V" + (at 102.4 117.6 0) + (layer "F.SilkS") + (uuid "dc612d7b-e767-5a33-8edc-6afea291e4fb") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "USB" + (at 102.2 137.3 0) + (layer "F.SilkS") + (uuid "fe3c31ba-dae5-56d3-95fa-9f566a675886") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "ARM" + (at 171 107.15 90) + (layer "F.SilkS") + (uuid "0753cdda-bfcc-5732-b3e2-06f3d940ac17") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "HOME" + (at 171 121 90) + (layer "F.SilkS") + (uuid "f9140ffa-03c8-5406-ba77-596ecf015d75") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "HALL" + (at 171.4 133.6 90) + (layer "F.SilkS") + (uuid "04bea5ee-c46f-5903-b769-a12ceb56337b") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "LED" + (at 171 143.2 90) + (layer "F.SilkS") + (uuid "597248de-7179-5bbf-97a1-cbdaec2fbf96") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "EXP" + (at 174.6 155.8 90) + (layer "F.SilkS") + (uuid "aeefdf18-73b2-5aa9-81cc-def10901ec8b") + (effects + (font + (size 0.9 0.9) + (thickness 0.135) + ) + ) + ) + (gr_text "VMOT" + (at 120.32 103.5 0) + (layer "F.SilkS") + (uuid "b94b9eb2-be55-5ecf-9d4e-fc1a0a4db896") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "EN" + (at 120.32 113 0) + (layer "F.SilkS") + (uuid "608d34fd-bb99-5ae3-95d0-f6c537b22e1a") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "DIR" + (at 138.1 113 0) + (layer "F.SilkS") + (uuid "902d07be-ea12-57aa-9928-847cc0d16567") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "VMOT" + (at 141.32 103.5 0) + (layer "F.SilkS") + (uuid "5124b8e9-fc69-5aa6-8707-4af39c366864") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "EN" + (at 141.32 113 0) + (layer "F.SilkS") + (uuid "8a901ef6-7dac-51af-ae04-c88c516ee5cf") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "DIR" + (at 159.1 113 0) + (layer "F.SilkS") + (uuid "c2c9c71a-d75e-583b-98e5-5a47da0637a1") + (effects + (font + (size 0.8 0.8) + (thickness 0.12) + ) + ) + ) + (gr_text "SANDTABLE CONTROLLER v0.4" + (at 140 130 0) + (layer "B.SilkS") + (uuid "b5665b84-c44c-54c7-aab2-461b9d9f829b") + (effects + (font + (size 1.6 1.6) + (thickness 0.24) + (bold yes) + ) + (justify mirror) + ) + ) + (gr_text "ESP32 + 2x DRV8825 | 12V in | FluidNC" + (at 140 133 0) + (layer "B.SilkS") + (uuid "78638186-0c48-5189-8ac3-e2550afdf4b0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (gr_text "lazypugs 2026" + (at 140 135.5 0) + (layer "B.SilkS") + (uuid "e12a2ff1-fc9d-5d6a-b879-403c55711f78") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (gr_text "A4988 ONLY" + (at 136 109.9 0) + (layer "F.SilkS") + (uuid "f7e84a30-4434-5060-8b77-5e4f57176e85") + (effects + (font + (size 0.7 0.7) + (thickness 0.105) + ) + ) + ) + (gr_text "WayWayWay" + (at 140 138 0) + (layer "B.SilkS") + (uuid "cefbd5f2-d2f7-55e2-afa2-804d3439077b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (segment + (start 107.445 143.75) + (end 109 143.75) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "e4a5d5ca-7443-5bbd-87e3-3790f578c237") + ) + (segment + (start 107.445 144.75) + (end 109 144.75) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "f0199340-6cd5-5793-b64e-4eaaaa24f9a3") + ) + (segment + (start 109 143.75) + (end 109 144.75) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "72cdc08e-d3b1-5ce4-8e77-1199fe38af53") + ) + (segment + (start 107.445 143.25) + (end 106.15 143.25) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "227913f1-3b97-555f-b125-3e85ae8a0319") + ) + (segment + (start 107.445 144.25) + (end 106.15 144.25) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "f1367aee-d1d2-5722-b4ec-09b38ac9590f") + ) + (segment + (start 106.15 143.25) + (end 106.15 144.25) + (width 0.2) + (layer "B.Cu") + (net 30) + (uuid "299322f0-02a9-55df-8d5f-891c3836c03f") + ) + (segment + (start 107.445 142.75) + (end 110.675 142.75) + (width 0.2) + (layer "F.Cu") + (net 6) + (uuid "ecbac6ce-9ed3-5d65-8ff0-779d83cecf1c") + ) + (segment + (start 107.445 145.75) + (end 110.675 145.75) + (width 0.2) + (layer "F.Cu") + (net 7) + (uuid "279ae33e-8a69-5fcf-a8f9-e3ef89bb157e") + ) + (segment + (start 107.445 140.75) + (end 109.3 140.75) + (width 0.4) + (layer "F.Cu") + (net 1) + (uuid "9d172a68-e699-5db6-b1cc-1e4fb1288685") + ) + (segment + (start 107.445 147.25) + (end 109.3 147.25) + (width 0.4) + (layer "F.Cu") + (net 1) + (uuid "a3e888ba-b4c0-540a-b3a8-1098145301b1") + ) + (segment + (start 122.86 101.9) + (end 122.86 105.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "10e5bd5c-6f61-5389-8d2f-26fe927b1e43") + ) + (segment + (start 143.86 101.9) + (end 143.86 105.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "34a4d31a-c18a-5880-b599-be0f99a9f818") + ) + (segment + (start 111.863 149.5) + (end 110.55 149.5) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "d40e5f92-a70d-51e4-b603-9acae0afa1cc") + ) + (segment + (start 161.775 118.5) + (end 161.775 119.6) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "9583a625-12d4-5c02-aaba-b732750d21d5") + ) + (segment + (start 161.775 119.6) + (end 161.775 120.7) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "b718732e-ddf9-506c-8c38-7915abc2bb89") + ) + (segment + (start 120.32 101.9) + (end 120.32 105.4) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "065da8be-0454-595b-a795-304ede82cea7") + ) + (segment + (start 141.32 101.9) + (end 141.32 105.4) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "75fa4f5d-5a5f-569e-b4ab-19afd54fe84e") + ) + (segment + (start 107.445 141.55) + (end 109.3 141.55) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "1abad463-01a3-5ab0-89ca-d82c196c5189") + ) + (segment + (start 107.445 146.45) + (end 109.3 146.45) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "837acb9e-55bd-5893-b061-aa84c90698d7") + ) + (segment + (start 109 144.2) + (end 110.6 144.2) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "071fec1f-85e6-5d59-911a-440d752f91f8") + ) + (segment + (start 110.6 144.2) + (end 111.5 145.1) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "bd616d49-bfcf-5289-90a0-5ff4a48f2ab8") + ) + (segment + (start 111.5 145.1) + (end 111.5 148.1) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "f585750b-a3f9-5b77-8779-f5503059fb92") + ) + (segment + (start 111.5 148.1) + (end 111.7 148.3) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "9f78b368-fa98-5ec1-96e1-dae004256ee9") + ) + (segment + (start 112.5 148.5) + (end 113.5 148.5) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "7aed0104-7221-519e-bd44-0db483df9d13") + ) + (segment + (start 114.8 148.3) + (end 115.2 147.9) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "23a3f372-e9b6-5d4b-b11a-dfa6ab373524") + ) + (segment + (start 115.2 147.9) + (end 118.6 147.9) + (width 0.2) + (layer "F.Cu") + (net 31) + (uuid "3092bb8b-912e-5304-9b80-9b58f0dec281") + ) + (segment + (start 106.2 143.8) + (end 108.2 145.8) + (width 0.2) + (layer "B.Cu") + (net 30) + (uuid "b7a83f09-6ed9-5e88-840d-969844275dbc") + ) + (segment + (start 108.2 145.8) + (end 108.2 148.2) + (width 0.2) + (layer "B.Cu") + (net 30) + (uuid "5952a51c-b626-5747-9aee-5c8d6588d05a") + ) + (segment + (start 108.2 148.2) + (end 110.2 150.2) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "350b5ee8-0b9b-5f07-8562-3c09bf840a13") + ) + (segment + (start 110.2 150.2) + (end 111.2 150.2) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "e1e69a36-0476-5f57-98db-f991310480a2") + ) + (segment + (start 112.5 150.4) + (end 113.5 150.4) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "253b4d56-ec8d-5b53-8d4b-9d7e8271358a") + ) + (segment + (start 114.8 150.2) + (end 117.6 150.2) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "e4ffeede-f6df-5964-94c7-9c8a9c23d284") + ) + (segment + (start 117.6 150.2) + (end 118.6 149.2) + (width 0.2) + (layer "F.Cu") + (net 30) + (uuid "4fa3026b-ca01-50e8-a25b-136a6733298e") + ) + (segment + (start 109.3 141.5) + (end 109.6 141.8) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "aa21faa1-e060-5515-9ac1-93e4908f6048") + ) + (segment + (start 109.6 141.8) + (end 109.6 146.5) + (width 0.4) + (layer "B.Cu") + (net 32) + (uuid "36af672c-4993-5a0c-a05f-ff9d3d867f68") + ) + (segment + (start 109.6 146.5) + (end 109.5 146.4) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "0feb7b45-a780-5641-bc06-c0c61629e12d") + ) + (segment + (start 109.5 146.4) + (end 109.3 146.4) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "772bcc31-e46d-5c1a-af2f-c973220936ec") + ) + (segment + (start 109.6 141.8) + (end 110.5 140.9) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "278e36d8-2677-5bd0-b5d0-e9b021976d30") + ) + (segment + (start 110.5 140.9) + (end 113.5 140.9) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "bde50c2e-5c58-589c-b60c-5cb8b97027c6") + ) + (segment + (start 113.5 140.9) + (end 114.2 140.2) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "da26833a-1d31-5fbd-be7a-cdacbc4bd711") + ) + (segment + (start 109.6 146.5) + (end 112.5 149.4) + (width 0.4) + (layer "B.Cu") + (net 32) + (uuid "3083b267-1d7a-5227-9eb9-ad40c7c0c409") + ) + (segment + (start 112.5 149.4) + (end 115.3 149.4) + (width 0.4) + (layer "B.Cu") + (net 32) + (uuid "5036e357-2359-53d4-9e5d-c7a13aca9422") + ) + (segment + (start 115.3 149.4) + (end 114.8 149.4) + (width 0.4) + (layer "F.Cu") + (net 32) + (uuid "4faff915-4e21-5c38-b66b-f4355278f48c") + ) + (segment + (start 111 117.9) + (end 111 122.7) + (width 0.8) + (layer "F.Cu") + (net 34) + (uuid "3c3eb5bf-fd33-59f9-8a0b-510da67e2ebb") + ) + (segment + (start 111 122.7) + (end 111.3 123) + (width 0.8) + (layer "F.Cu") + (net 34) + (uuid "e05882b5-4a6f-5c88-a4fc-c313e5efc394") + ) + (segment + (start 105.4 103.3) + (end 119.3 103.3) + (width 0.5) + (layer "F.Cu") + (net 38) + (uuid "aa8a8be4-6f40-562e-9893-ce5de78d7960") + ) + (segment + (start 119.3 103.3) + (end 123.6 103.3) + (width 0.5) + (layer "B.Cu") + (net 38) + (uuid "b2c821a3-8c9e-56b2-925e-c748e1ea0723") + ) + (segment + (start 123.6 103.3) + (end 124.7 102.2) + (width 0.5) + (layer "B.Cu") + (net 38) + (uuid "0223fd92-c4a3-558a-ac32-55e9f660b3ca") + ) + (segment + (start 105.4 110.6) + (end 124.3 110.6) + (width 0.5) + (layer "F.Cu") + (net 36) + (uuid "41df9fc9-0a65-5663-ade5-9fd8837dd5ca") + ) + (segment + (start 124.3 110.6) + (end 132.5 102.4) + (width 0.5) + (layer "F.Cu") + (net 36) + (uuid "ec5a006d-9df9-5cc2-9c26-07b7783ec4a8") + ) + (segment + (start 105.3 105.4) + (end 119.1 105.4) + (width 0.5) + (layer "F.Cu") + (net 37) + (uuid "bfa11dfd-7a9c-5ff8-b376-6bba1ed5080d") + ) + (segment + (start 119.1 105.4) + (end 124 105.4) + (width 0.5) + (layer "B.Cu") + (net 37) + (uuid "61ec67e3-7944-5633-8a60-522de8c9f5bd") + ) + (segment + (start 124 105.4) + (end 127.2 102.2) + (width 0.5) + (layer "B.Cu") + (net 37) + (uuid "17f50075-7fad-530f-bde0-44e92ff8636d") + ) + (segment + (start 105.4 108.7) + (end 106.4 109.7) + (width 0.5) + (layer "F.Cu") + (net 35) + (uuid "1072a263-efd3-551e-bbba-88e0d8b1585a") + ) + (segment + (start 106.4 109.7) + (end 122.4 109.7) + (width 0.5) + (layer "F.Cu") + (net 35) + (uuid "94d1c6e0-be2e-5bc1-bb6f-b0b1ef60e85d") + ) + (segment + (start 122.4 109.7) + (end 129.8 102.3) + (width 0.5) + (layer "F.Cu") + (net 35) + (uuid "778c69b0-8e54-5887-88fa-6080e35c59ce") + ) + (segment + (start 154.7 102.3) + (end 155.7 103.3) + (width 0.5) + (layer "F.Cu") + (net 42) + (uuid "8279d9e2-2bfe-5911-b79b-8576644f2298") + ) + (segment + (start 155.7 103.3) + (end 175.6 103.3) + (width 0.5) + (layer "F.Cu") + (net 42) + (uuid "f888b2f2-0d69-550f-a5e6-38cdd22acfa0") + ) + (segment + (start 147.1 102.2) + (end 155.5 110.6) + (width 0.5) + (layer "F.Cu") + (net 44) + (uuid "790249ac-a812-5eeb-bd62-494caf480e68") + ) + (segment + (start 155.5 110.6) + (end 175.6 110.6) + (width 0.5) + (layer "F.Cu") + (net 44) + (uuid "9f94a8e6-3ac6-5f99-b21b-53c14c1b6604") + ) + (segment + (start 152.2 102.2) + (end 155.6 105.6) + (width 0.5) + (layer "F.Cu") + (net 41) + (uuid "a6a8cbd0-dc96-5ffe-8408-ff4d20cb0aeb") + ) + (segment + (start 155.6 105.6) + (end 175.6 105.6) + (width 0.5) + (layer "F.Cu") + (net 41) + (uuid "85dec408-cf6b-5944-8ab0-395c08a7d4a1") + ) + (segment + (start 149.7 102.1) + (end 155.7 108.1) + (width 0.5) + (layer "F.Cu") + (net 43) + (uuid "0ede1ebf-97af-578d-8227-e9849700a63e") + ) + (segment + (start 155.7 108.1) + (end 175.6 108.1) + (width 0.5) + (layer "F.Cu") + (net 43) + (uuid "2c3a35a3-0a81-5301-a616-84e5eaaac7db") + ) + (segment + (start 119.8 106.3) + (end 119.8 108.7) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "78c86069-8ab8-5bf0-b781-5e219526ba31") + ) + (segment + (start 119.8 108.7) + (end 119.8 111.6) + (width 0.8) + (layer "B.Cu") + (net 2) + (uuid "995a9e4a-a7a2-5905-b07c-3ca4bb2a2dda") + ) + (segment + (start 119.8 111.6) + (end 118.8 112.6) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "b6ce31c3-37c6-570a-a844-fb1e20028064") + ) + (segment + (start 118.8 112.6) + (end 118.8 119) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "de8d6dda-911b-5555-96dd-1fb6d18bf159") + ) + (segment + (start 118.8 119) + (end 119.6 119.8) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "7e3164e1-fcfe-5601-84a1-feeb32f15440") + ) + (segment + (start 119 122.2) + (end 117.8 122.2) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "062b0a88-8f79-5167-9e28-39c62bf802a1") + ) + (segment + (start 117.8 122.2) + (end 116.9 123.1) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "a2558c0d-2c1a-5324-9409-0c05a640aba9") + ) + (segment + (start 116.9 125.2) + (end 116.9 133.5) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "a2127e7d-c923-5be5-a5e5-8fcfc1196fef") + ) + (segment + (start 116.9 133.5) + (end 117.3 133.9) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "40f5b5d2-d57c-5712-a321-850ec4a584d5") + ) + (segment + (start 118.7 136.1) + (end 118.7 138.7) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "302c6aad-5da9-549e-b235-bf980a075b1e") + ) + (segment + (start 122.5 119.8) + (end 123.3 119) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "fa2f5057-31f2-509f-8f8c-d6c783006ecb") + ) + (segment + (start 123.3 119) + (end 139.7 119) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "7e8e2fa2-5736-5990-8eeb-f5a5c3a46dc3") + ) + (segment + (start 139.7 119) + (end 140.5 119.8) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "e2bd9aa6-a944-502d-afcf-5eff4f228bf6") + ) + (segment + (start 139.7 119) + (end 139.7 107.4) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "5e34f74f-c6b2-558c-ae2a-72b64e2fa32b") + ) + (segment + (start 139.7 107.4) + (end 140.8 106.3) + (width 0.8) + (layer "F.Cu") + (net 2) + (uuid "48d552e3-bae6-50ad-a909-74a62c36f9b9") + ) + (segment + (start 137.3 132.9) + (end 137.3 137.4) + (width 0.2) + (layer "F.Cu") + (net 26) + (uuid "8f900e12-b4b2-57d4-a895-dc05568eb90f") + ) + (segment + (start 123.3 136.1) + (end 123.3 138) + (width 0.6) + (layer "F.Cu") + (net 5) + (uuid "91c3c6ca-d4a0-569a-add8-fb1ad5c8a2d4") + ) + (segment + (start 123.3 138) + (end 124 138.7) + (width 0.6) + (layer "F.Cu") + (net 5) + (uuid "65066933-8507-51a7-b9b9-c186333aa17b") + ) + (segment + (start 123.8 134.4) + (end 126.4 131.8) + (width 0.6) + (layer "F.Cu") + (net 5) + (uuid "d05bbc2a-ba23-56a9-ba9a-47d518a7ab70") + ) + (segment + (start 126.4 131.8) + (end 128 131.8) + (width 0.6) + (layer "F.Cu") + (net 5) + (uuid "eec25904-7ac0-545c-aae6-e531cf6c4e19") + ) + (segment + (start 111.8 139.2) + (end 113.4 137.6) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "b23bfa07-8a18-533c-b1fb-0eed3ad3514c") + ) + (segment + (start 113.4 137.6) + (end 117.7 137.6) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "5c91828b-a92a-5f34-a28b-8255b200cce6") + ) + (segment + (start 117.7 137.6) + (end 124.2 137.6) + (width 0.6) + (layer "B.Cu") + (net 4) + (uuid "d7292072-22fe-530f-81d7-186bb2a8c252") + ) + (segment + (start 124.2 137.6) + (end 126 135.8) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "ecd902bc-0ea7-5fad-8362-964369b94bb8") + ) + (segment + (start 126 135.8) + (end 128 135.8) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "cad9273e-c43c-582f-968f-48c7c452658c") + ) + (segment + (start 129.7 133.8) + (end 132.1 131.4) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "737417cf-eacd-5420-b9b6-96a8591222e0") + ) + (segment + (start 132.1 131.4) + (end 144.8 131.4) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "86399460-dc56-5ee9-9d19-6cb04dd98c8d") + ) + (segment + (start 144.8 131.4) + (end 145.5 132.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "4c8ab7bb-0e91-51c7-8ae6-7287871be453") + ) + (segment + (start 145.5 132.1) + (end 159.6 132.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "b786205b-9057-57e9-85a6-a6a65abb4627") + ) + (segment + (start 159.6 132.1) + (end 160.6 131.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "915723e8-56e7-5402-9672-65fce340df32") + ) + (segment + (start 161.4 130.4) + (end 161.6 130.4) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "0c3c443b-1987-51c0-85be-33fefe472bf4") + ) + (segment + (start 161.6 130.4) + (end 163.1 128.9) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "c88627d0-715c-59de-975d-be67a0c666d9") + ) + (segment + (start 163.1 128.9) + (end 163.1 128.5) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "6546777b-30e4-5cb1-9054-0bd86a6c484e") + ) + (segment + (start 163.1 128.5) + (end 163.5 128.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "caeab301-471f-57c3-b93c-ce5f2ed46cff") + ) + (segment + (start 163.5 128.1) + (end 165.3 128.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "02af8441-fc9e-54f2-84a0-c3bbf570befd") + ) + (segment + (start 165.3 128.1) + (end 166 128.8) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "5b1f0f2c-c4e6-5463-9045-3afb178fd3e3") + ) + (segment + (start 159.6 132.1) + (end 159.6 135.9) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "ce831daf-4c1a-5e2d-9742-52b71c75f5d7") + ) + (segment + (start 159.6 135.9) + (end 162.2 138.5) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "f9b324fe-e9b6-5ebf-9700-eaa79d42ecb5") + ) + (segment + (start 161.9 139.9) + (end 161.8 139.9) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "29a78b4a-1f62-5229-bb33-02fb5ec8ed1b") + ) + (segment + (start 161.8 139.9) + (end 161 140.7) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "654e7367-0be9-5b93-a6fa-f13bbe8056d8") + ) + (segment + (start 161 140.7) + (end 161 143.7) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "9c652d99-0b33-55b0-8004-8a2c166026c1") + ) + (segment + (start 161 143.7) + (end 160.2 144.5) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "37cc6746-db1d-5634-88e4-43935e9d8815") + ) + (segment + (start 167.3 128.8) + (end 168 128.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "c3689f74-c892-5700-9f94-01dbdec59007") + ) + (segment + (start 168 128.1) + (end 174.9 128.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "121f17f6-363f-58f2-a728-93e16ca267e4") + ) + (segment + (start 174.9 128.1) + (end 175.6 128.8) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "688f3e37-f558-575b-94f5-d64c51d594e1") + ) + (segment + (start 175.6 130.4) + (end 174.9 131.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "2f67ed15-7773-5213-af95-599475fa829c") + ) + (segment + (start 174.9 131.1) + (end 174.9 139.1) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "3f0e2644-dcf8-562a-ac6a-da0cb0ba295b") + ) + (segment + (start 174.9 139.1) + (end 175.7 139.9) + (width 0.6) + (layer "F.Cu") + (net 4) + (uuid "507aab15-e430-5396-b3c3-d6c57cec1e2c") + ) + (segment + (start 123.6 114.6) + (end 124.6 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "16dc176c-22a4-57f7-9e13-00455d8562eb") + ) + (segment + (start 126.2 114.6) + (end 127.2 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "ec73c565-a870-5f7b-ba67-775255da33d0") + ) + (segment + (start 128.7 114.6) + (end 129.7 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "d787452b-3e3b-509c-8264-eb6cc0f6b782") + ) + (segment + (start 131.2 114.6) + (end 132.3 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "ad65e940-6325-551b-8053-4c0b2701a181") + ) + (segment + (start 133.4 113.9) + (end 134.9 112.4) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "077de7aa-88a1-5535-a6cd-348451433b9a") + ) + (segment + (start 134.9 112.4) + (end 134.9 108.7) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "4b1f99b5-e27e-5b41-af83-55a0774449ef") + ) + (segment + (start 134.9 112.4) + (end 138.7 112.4) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "dbbb692d-6670-5acc-b834-093be42c40b1") + ) + (segment + (start 138.7 112.4) + (end 141.1 112.4) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "c9bf2fca-2086-5c38-acad-cb74c8059503") + ) + (segment + (start 141.1 112.4) + (end 143.1 114.4) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "bf95cba6-f99b-5419-8872-6fc4b62f35cd") + ) + (segment + (start 144.6 114.6) + (end 145.6 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "0320386c-6574-5547-8e2b-82ab3a4d3a69") + ) + (segment + (start 147.2 114.6) + (end 148.2 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "499b859b-5dd6-59d1-96de-7acd3f372fb3") + ) + (segment + (start 149.7 114.6) + (end 150.7 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "24d29de8-edf5-57df-84a1-c9e3dd2be09f") + ) + (segment + (start 152.2 114.6) + (end 153.3 114.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "f1280bf0-bb2d-59e7-b149-660af9003de3") + ) + (segment + (start 153.5 115.2) + (end 153.5 118.1) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "0030e1ea-949f-5d58-9218-b8b7586786d1") + ) + (segment + (start 153.2 118.9) + (end 153.2 120.3) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "96d4cd16-9c3b-555a-a51a-51614846ba91") + ) + (segment + (start 154.7 115) + (end 155.6 115.9) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "b4d6879d-6be6-5abb-bb8e-94f93bc7de29") + ) + (segment + (start 155.6 115.9) + (end 163.2 115.9) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "c4756ad9-990a-51a6-94e4-db45f2e4b11f") + ) + (segment + (start 163.4 116) + (end 163.4 117.8) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "24693606-8c58-5712-b8d9-1824e67d8c8e") + ) + (segment + (start 163.7 118.2) + (end 164.3 118.8) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "7152be8a-7a07-5901-bace-c4320d43e32f") + ) + (segment + (start 164.3 118.8) + (end 175.6 118.8) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "4d4e01a1-13ec-5021-9d16-90d632de1c74") + ) + (segment + (start 152.8 121.1) + (end 146.5 127.4) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "81a0a9ed-84a8-59f8-8393-edd10ebcebad") + ) + (segment + (start 146.5 127.4) + (end 146.5 130.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "a9e659e3-0325-5263-a5e2-53e3faf26184") + ) + (segment + (start 145.8 130.6) + (end 145.7 130.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "e784a6e5-3641-50f7-b45e-677ef12bcfd2") + ) + (segment + (start 145.7 130.5) + (end 139.9 130.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "142f5a52-3132-5b79-8021-bc3d06777a11") + ) + (segment + (start 139.9 130.5) + (end 139.5 130.5) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "012cc2a8-505e-562e-a5e7-857045f58136") + ) + (segment + (start 139.5 130.5) + (end 136.5 133.5) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "99db677e-ac0c-5915-a1ca-6cfa8dd6da63") + ) + (segment + (start 136.5 133.5) + (end 134.2 133.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "47101a93-2ef8-50cc-b489-01a7fe71ff76") + ) + (segment + (start 134.2 133.5) + (end 133.5 132.8) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "8b7957af-9652-5f4d-b9de-3ebab47ea265") + ) + (segment + (start 134.2 133.5) + (end 130.5 137.2) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "0b8d944d-319a-511e-8597-7ded6bf47337") + ) + (segment + (start 129.8 137.9) + (end 129.8 141.1) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "9f80e898-f6af-5b72-8b8f-42c4b0f89fff") + ) + (segment + (start 129.8 141.1) + (end 127.4 143.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "6a9cb650-58b9-515e-b48b-b55e91b8af85") + ) + (segment + (start 126.6 143.4) + (end 126.1 143.4) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "8ae69b67-bdb5-55c0-a2fd-57402e08f7a0") + ) + (segment + (start 126.1 143.4) + (end 125.4 142.7) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "3a9e6c1f-a0c1-5c2f-b252-d5c2f51f998c") + ) + (segment + (start 123.5 142.8) + (end 121 145.3) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "5c3b658c-c4c0-5cba-aaf1-d815a118a468") + ) + (segment + (start 121 145.3) + (end 121 145.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "a7f1b393-ab64-5973-902e-c22d8b372080") + ) + (segment + (start 121 145.6) + (end 120.5 146.1) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "965240de-550b-5d79-8223-4b1aab18a78f") + ) + (segment + (start 146.5 130) + (end 148.9 130) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "1b02632a-4b9a-5cfc-8ef9-f1fb0a8f09ea") + ) + (segment + (start 148.9 130) + (end 150.1 131.2) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "e156abf4-233e-50d4-8095-3a904f74f376") + ) + (segment + (start 150.1 131.2) + (end 151.9 133) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "65f0ea75-ab71-5b8a-b5ae-c33189c6a653") + ) + (segment + (start 151.9 133) + (end 158.9 140) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "7814cbb3-51fe-574a-a979-dd78e9018392") + ) + (segment + (start 160.1 140.9) + (end 160.1 141.9) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "75c4076a-a9fb-51c4-aa3f-0f2bbeda8a19") + ) + (segment + (start 160.1 141.9) + (end 160.1 143.5) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "d29cc032-0c31-50c4-a525-80fdcbceb2a6") + ) + (segment + (start 160.1 143.5) + (end 161.3 144.7) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "ca9d5d72-fb49-5b50-a562-7a141d6b6c06") + ) + (segment + (start 161.3 144.7) + (end 161.9 144.1) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "3e6f1a81-4e19-5563-8541-690e6c17ffc7") + ) + (segment + (start 161.3 144.7) + (end 161.3 145.2) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "fcda3920-96fc-5254-9547-c09a0007718a") + ) + (segment + (start 161.3 145.2) + (end 156.5 150) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "64777e48-1a72-55d8-a958-8e2e7e0bc8c9") + ) + (segment + (start 156.5 150) + (end 154.8 150) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "6a5c7bd7-febd-53ed-98a5-57fdd700f9ff") + ) + (segment + (start 154.8 150) + (end 154.1 150.7) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "33c8b814-7e9c-57d1-acd6-3d17750cda10") + ) + (segment + (start 153.4 150.6) + (end 153.4 150.4) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "9f8b7bdc-9711-5780-b848-2b0eabc38ddf") + ) + (segment + (start 153.4 150.4) + (end 153.1 150.1) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "befcea6a-3f61-52b8-a072-3fa373fae359") + ) + (segment + (start 153.1 150.1) + (end 153.1 153.9) + (width 0.4) + (layer "B.Cu") + (net 3) + (uuid "e5c5eaa2-96d9-5456-840a-c2183f86d155") + ) + (segment + (start 153.1 153.9) + (end 152.5 154.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "09767704-bc89-5bc6-bd4e-5e06ceb393d5") + ) + (segment + (start 153 154) + (end 154.6 155.6) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "1644beef-b5b1-5184-8210-2a29b9588c64") + ) + (segment + (start 155.4 155.5) + (end 156.8 155.5) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "6ec46ddf-9d10-5eb8-a677-68f2dfa931f5") + ) + (segment + (start 163.8 144.5) + (end 170.5 151.2) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "94ecbc4a-c3a4-551b-aaad-08bd218abee8") + ) + (segment + (start 170.5 151.2) + (end 176.7 151.2) + (width 0.4) + (layer "F.Cu") + (net 3) + (uuid "cd186de6-a238-5598-af40-cd801c37d2c1") + ) + (segment + (start 139.2 129.6) + (end 140 129.6) + (width 0.2) + (layer "F.Cu") + (net 27) + (uuid "9c5edcfa-63eb-58b4-ab27-00770225a84a") + ) + (segment + (start 140 129.6) + (end 140.6 130.2) + (width 0.2) + (layer "B.Cu") + (net 27) + (uuid "6486eebd-87e4-54ce-9374-679fdb085936") + ) + (segment + (start 140.6 130.2) + (end 140.6 131.5) + (width 0.2) + (layer "B.Cu") + (net 27) + (uuid "2a087834-d28d-53df-9da8-bd3d8cdaecf2") + ) + (segment + (start 140.6 131.5) + (end 139.8 132.3) + (width 0.2) + (layer "B.Cu") + (net 27) + (uuid "c3073e56-ac75-5e4a-bae5-2113dcabe6aa") + ) + (segment + (start 139.8 132.3) + (end 139.2 132.3) + (width 0.2) + (layer "F.Cu") + (net 27) + (uuid "779dafb7-ce4f-5a07-a004-009a7c40cc76") + ) + (segment + (start 135.2 130.4) + (end 135.3 130.5) + (width 0.2) + (layer "F.Cu") + (net 22) + (uuid "396f9e3d-dcef-512c-b442-e4a40a7e05d6") + ) + (segment + (start 135.3 130.5) + (end 135.8 130.5) + (width 0.2) + (layer "F.Cu") + (net 22) + (uuid "905da8f9-0f7a-5243-807e-d65c974cac35") + ) + (segment + (start 135.8 130.5) + (end 135.8 132.3) + (width 0.2) + (layer "B.Cu") + (net 22) + (uuid "18decf37-0d44-5dd9-858b-4241231eebdd") + ) + (segment + (start 135.8 132.3) + (end 135.2 132.3) + (width 0.2) + (layer "F.Cu") + (net 22) + (uuid "a660e817-d499-5655-8f8c-14ae7fbcf6d4") + ) + (segment + (start 167.3 130.8) + (end 169.6 130.8) + (width 0.2) + (layer "F.Cu") + (net 19) + (uuid "e66ad4d2-fdd6-52ce-811e-c9e858d5b852") + ) + (segment + (start 115.3 117.9) + (end 115.3 118.8) + (width 0.8) + (layer "F.Cu") + (net 33) + (uuid "e7c665ef-cb0c-53db-a8e8-e92d54793052") + ) + (segment + (start 127.8 150) + (end 128.8 149) + (width 0.2) + (layer "F.Cu") + (net 24) + (uuid "7458e9b4-165d-5be8-99f4-5adc6fb2ed29") + ) + (segment + (start 128.8 149) + (end 130.6 149) + (width 0.2) + (layer "F.Cu") + (net 24) + (uuid "49e342b6-46ab-5f20-80be-c1f87e9448eb") + ) + (segment + (start 127.8 146) + (end 129.3 144.5) + (width 0.2) + (layer "F.Cu") + (net 23) + (uuid "bb847c08-a913-52ea-8265-e58842403d4c") + ) + (segment + (start 129.3 144.5) + (end 130.6 144.5) + (width 0.2) + (layer "F.Cu") + (net 23) + (uuid "89b7f5b8-8a5f-50c5-88b7-2837e45b04b9") + ) + (segment + (start 125.4 145.3) + (end 125.9 145.8) + (width 0.2) + (layer "F.Cu") + (net 25) + (uuid "acc2ce97-2a98-5e89-83f4-c670e10175a8") + ) + (segment + (start 125.9 145.8) + (end 125.9 146.9) + (width 0.2) + (layer "F.Cu") + (net 25) + (uuid "0d10fa4d-a339-5ab6-8c23-5222047a5d69") + ) + (segment + (start 125.9 146.9) + (end 126.9 147.9) + (width 0.2) + (layer "F.Cu") + (net 25) + (uuid "8f34a9c1-61f6-5412-9b83-b3c10173d0ce") + ) + (segment + (start 127.8 148.4) + (end 128.3 148.4) + (width 0.2) + (layer "F.Cu") + (net 25) + (uuid "70bea13f-f426-5343-ad3a-9ef3ace179b8") + ) + (segment + (start 128.3 148.4) + (end 129.9 150) + (width 0.2) + (layer "B.Cu") + (net 25) + (uuid "7a0274d3-ac0c-5f74-8564-e1658033198f") + ) + (segment + (start 129.9 150) + (end 130.6 150) + (width 0.2) + (layer "F.Cu") + (net 25) + (uuid "5aa5487f-24af-5cc0-8d80-562391f74527") + ) + (segment + (start 123.5 146.1) + (end 123 146.1) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "95061f6a-68fc-515b-a86c-3f7fe46625fd") + ) + (segment + (start 123 146.1) + (end 128.7 146.1) + (width 0.2) + (layer "B.Cu") + (net 10) + (uuid "6e7abf2c-3e65-5c35-b448-a38a88c7ad6a") + ) + (segment + (start 128.7 146.1) + (end 130.6 146.1) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "06682fe7-37da-57ad-9cbc-8d485e084b36") + ) + (segment + (start 127.1 146.1) + (end 127.1 151.2) + (width 0.2) + (layer "B.Cu") + (net 10) + (uuid "9a672c14-8a86-50b3-ba96-e7d11d0decaf") + ) + (segment + (start 127.1 151.2) + (end 127.1 151.9) + (width 0.2) + (layer "F.Cu") + (net 10) + (uuid "864b0675-b420-50a6-ba47-238e6d5af5a1") + ) + (segment + (start 170.4 129.5) + (end 174.2 133.3) + (width 0.2) + (layer "F.Cu") + (net 21) + (uuid "9668e7e3-9ac0-5d74-a4ea-6eb20205931c") + ) + (segment + (start 174.2 133.3) + (end 174.2 140.8) + (width 0.2) + (layer "F.Cu") + (net 21) + (uuid "46ab27da-69d8-5297-b702-921a1a874273") + ) + (segment + (start 174.2 140.8) + (end 175.9 142.5) + (width 0.2) + (layer "F.Cu") + (net 21) + (uuid "df13380b-ba9d-5ccf-a074-d42f55805284") + ) + (segment + (start 120.5 144.1) + (end 121 144.1) + (width 0.2) + (layer "F.Cu") + (net 28) + (uuid "f77b9ac6-567b-5cc0-8624-42072b58998d") + ) + (segment + (start 121 144.1) + (end 127.7 144.1) + (width 0.2) + (layer "B.Cu") + (net 28) + (uuid "3b582573-e49f-5d01-834f-9eab3444b7e3") + ) + (segment + (start 127.7 144.1) + (end 132.1 148.5) + (width 0.2) + (layer "B.Cu") + (net 28) + (uuid "d0b1d4f6-1e80-506f-bae9-b2c982ccd9d3") + ) + (segment + (start 132.1 148.5) + (end 132.1 149.1) + (width 0.2) + (layer "F.Cu") + (net 28) + (uuid "f50fb90b-6c89-52be-89b0-cd8da1d11fba") + ) + (segment + (start 132.1 149.1) + (end 133.5 150.5) + (width 0.2) + (layer "F.Cu") + (net 28) + (uuid "9baaf1a9-d59a-5b5c-8f7d-9d6348c9c8b3") + ) + (segment + (start 118.6 145.3) + (end 118 145.3) + (width 0.2) + (layer "F.Cu") + (net 29) + (uuid "1f4aa450-2072-5fca-9b39-28735387f290") + ) + (segment + (start 118 145.3) + (end 124.8 152.1) + (width 0.2) + (layer "B.Cu") + (net 29) + (uuid "168b8766-61cd-5548-95e6-02f2a86fc940") + ) + (segment + (start 124.8 152.1) + (end 128.4 152.1) + (width 0.2) + (layer "B.Cu") + (net 29) + (uuid "be3af123-ca05-5bc7-99bb-70f34965c640") + ) + (segment + (start 128.4 152.1) + (end 133.5 152.1) + (width 0.2) + (layer "F.Cu") + (net 29) + (uuid "146d8b81-ddd0-558a-835d-e06aefa2400e") + ) + (segment + (start 155.2 118.5) + (end 156.3 118.5) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "15cfc6f0-8b03-5961-942c-a6a1de786529") + ) + (segment + (start 157 118.1) + (end 157.5 117.6) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "a8ecee8c-6654-5631-a8ed-c5b5fcf25ee9") + ) + (segment + (start 157.5 117.6) + (end 162.4 117.6) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "d6287305-1243-5eac-8e76-8f31abe5cacc") + ) + (segment + (start 162.4 117.6) + (end 162.7 117.9) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "5054afd4-9e28-5411-870e-417e71c83e86") + ) + (segment + (start 162.7 117.9) + (end 162.7 118.4) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "32b866a6-5fdb-54f0-b8d9-f378a393671d") + ) + (segment + (start 162.7 118.4) + (end 165 120.7) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "581b3faf-5c2c-517b-a427-edb11a2f8cc5") + ) + (segment + (start 165 120.7) + (end 175.6 120.7) + (width 0.2) + (layer "F.Cu") + (net 17) + (uuid "f512af4f-aa0c-524f-b9a1-6f86396b7678") + ) + (segment + (start 135.9 102.6) + (end 136.3 103) + (width 0.2) + (layer "F.Cu") + (net 9) + (uuid "e4795cc1-d20f-5c12-9f24-511b8fe9c8a6") + ) + (segment + (start 136.3 103) + (end 136.3 107.3) + (width 0.2) + (layer "F.Cu") + (net 9) + (uuid "26476880-5cfe-5a76-8445-989ff75311a7") + ) + (segment + (start 136.2 101.5) + (end 137 100.7) + (width 0.2) + (layer "F.Cu") + (net 9) + (uuid "688ded3a-a078-56e8-814b-797baf9df5e9") + ) + (segment + (start 137 100.7) + (end 154.8 100.7) + (width 0.2) + (layer "F.Cu") + (net 9) + (uuid "4c877969-8273-56c4-a264-c32484cb09d3") + ) + (segment + (start 154.8 100.7) + (end 155.8 101.7) + (width 0.2) + (layer "F.Cu") + (net 9) + (uuid "869ea280-7ed7-5350-bb3c-8ff542f2a19f") + ) + (segment + (start 163.7 130.2) + (end 163.6 130.2) + (width 0.2) + (layer "F.Cu") + (net 20) + (uuid "a90e9b14-6493-5fbf-a6b9-1c19fdfb7396") + ) + (segment + (start 163.6 130.2) + (end 161.5 132.3) + (width 0.2) + (layer "F.Cu") + (net 20) + (uuid "c59e8485-b125-5100-8298-104d63c9b416") + ) + (segment + (start 161.5 132.3) + (end 161.5 136.5) + (width 0.2) + (layer "F.Cu") + (net 20) + (uuid "23316208-868e-5e05-ac39-c73608455a94") + ) + (segment + (start 161.5 136.5) + (end 157.8 140.2) + (width 0.2) + (layer "B.Cu") + (net 20) + (uuid "932d1c6d-b83a-543a-9db4-52235eabc937") + ) + (segment + (start 157.8 140.2) + (end 152.5 145.5) + (width 0.2) + (layer "F.Cu") + (net 20) + (uuid "84face9c-7426-5843-bf16-7e0e00e2cc45") + ) + (segment + (start 132.2 137.9) + (end 133.5 139.2) + (width 0.2) + (layer "F.Cu") + (net 18) + (uuid "276b9f5b-7388-548e-9558-d54b224cd776") + ) + (segment + (start 133.5 139.7) + (end 133.4 139.7) + (width 0.2) + (layer "F.Cu") + (net 18) + (uuid "8dda006d-8070-5950-923d-e41470ea88a0") + ) + (segment + (start 133.4 139.7) + (end 132.9 140.2) + (width 0.2) + (layer "F.Cu") + (net 18) + (uuid "aab0f659-70f5-5293-bb69-5506221ca76e") + ) + (segment + (start 132.9 140.2) + (end 132.9 148.1) + (width 0.2) + (layer "F.Cu") + (net 18) + (uuid "2290df37-72c4-5531-bfdd-bdef7755bbc1") + ) + (segment + (start 132.9 148.1) + (end 132.9 148.7) + (width 0.2) + (layer "B.Cu") + (net 18) + (uuid "6cbd583d-1151-56a2-adff-be746c9df51a") + ) + (segment + (start 132.9 148.7) + (end 130.3 151.3) + (width 0.2) + (layer "B.Cu") + (net 18) + (uuid "27aa5c33-4cb9-5ae4-9505-f1d90f2f2f04") + ) + (segment + (start 130.3 151.3) + (end 129.6 151.3) + (width 0.2) + (layer "F.Cu") + (net 18) + (uuid "ff28f310-1dfb-5cf9-b52d-fa705d333a18") + ) + (segment + (start 130.3 151.3) + (end 128.6 153) + (width 0.2) + (layer "B.Cu") + (net 18) + (uuid "64df95a5-54d6-57c7-a1da-4a0e2e169b9d") + ) + (segment + (start 128.6 153) + (end 122.3 153) + (width 0.2) + (layer "F.Cu") + (net 18) + (uuid "ded80725-4de4-57da-a7b9-60178bb6d6de") + ) + (segment + (start 122.3 153) + (end 120.7 154.6) + (width 0.2) + (layer "F.Cu") + (net 18) + (uuid "92c456ae-fa38-5d05-a097-0f70dc6cc7c3") + ) + (segment + (start 156.2 115.3) + (end 152.9 118.6) + (width 0.2) + (layer "B.Cu") + (net 46) + (uuid "b4ceb657-bd6e-5999-8bc2-1ded92851b3a") + ) + (segment + (start 152.9 118.6) + (end 152.9 135.2) + (width 0.2) + (layer "B.Cu") + (net 46) + (uuid "7acf7b4c-4295-5839-a0b8-636d7de5c338") + ) + (segment + (start 152.9 135.2) + (end 152.9 141.2) + (width 0.2) + (layer "F.Cu") + (net 46) + (uuid "1a594539-0fe6-512a-a6f9-d21f80d18c68") + ) + (segment + (start 152.9 141.2) + (end 152.5 141.6) + (width 0.2) + (layer "F.Cu") + (net 46) + (uuid "a55b48a7-77f9-5ef5-ba40-8b109916bdc9") + ) + (segment + (start 135.2 115.3) + (end 135.1 115.4) + (width 0.2) + (layer "B.Cu") + (net 40) + (uuid "63036878-a894-5faa-a870-5235216ae981") + ) + (segment + (start 135.1 115.4) + (end 135.1 134.3) + (width 0.2) + (layer "B.Cu") + (net 40) + (uuid "34883297-29bd-52b5-aa4c-d4c034634cc2") + ) + (segment + (start 135.1 134.3) + (end 135.4 134.6) + (width 0.2) + (layer "F.Cu") + (net 40) + (uuid "8afa31ca-1c04-56a6-bfff-1e1f1b1eb34c") + ) + (segment + (start 135.4 134.6) + (end 135.4 145.1) + (width 0.2) + (layer "F.Cu") + (net 40) + (uuid "d52c87e8-5529-5935-b954-6c7f9dba1492") + ) + (segment + (start 135.4 145.1) + (end 135 145.5) + (width 0.2) + (layer "F.Cu") + (net 40) + (uuid "8cdba291-d9e2-5396-a8ec-665c62050429") + ) + (segment + (start 155.2 120.7) + (end 156.3 120.7) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "254bacd9-425d-5b82-9c77-0bd954d5460c") + ) + (segment + (start 157 121.1) + (end 163.1 127.2) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "f35da7a0-0338-5854-bfcc-69a36f73068a") + ) + (segment + (start 163.1 127.2) + (end 171.5 127.2) + (width 0.2) + (layer "F.Cu") + (net 15) + (uuid "8a59dbfd-cea6-5a9d-952b-e72a405c31e1") + ) + (segment + (start 171.5 127.2) + (end 175.8 131.5) + (width 0.2) + (layer "B.Cu") + (net 15) + (uuid "29d656f4-3fe1-51d0-9bf8-808383525baf") + ) + (segment + (start 152.5 147.4) + (end 157.9 147.4) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "3d52dce4-e7d1-586b-a088-906926288379") + ) + (segment + (start 157.9 147.4) + (end 159.1 148.6) + (width 0.2) + (layer "B.Cu") + (net 13) + (uuid "af5db092-32c4-5d30-bb68-7e327dc68e46") + ) + (segment + (start 159.1 148.6) + (end 164.8 154.3) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "ad781c32-95d7-51a7-a2f5-67cea52d2874") + ) + (segment + (start 164.8 154.3) + (end 176.7 154.3) + (width 0.2) + (layer "F.Cu") + (net 13) + (uuid "c017f16a-7830-54ee-b189-a6f32682799e") + ) + (segment + (start 158.8 115.3) + (end 158.8 130.3) + (width 0.2) + (layer "B.Cu") + (net 45) + (uuid "d6ab934e-8256-5afc-8ad1-a9b59cc79c10") + ) + (segment + (start 158.8 130.3) + (end 152.2 136.9) + (width 0.2) + (layer "B.Cu") + (net 45) + (uuid "405c4a45-4721-57fc-8487-4ec9e9eda702") + ) + (segment + (start 152.2 136.9) + (end 150.6 138.5) + (width 0.2) + (layer "F.Cu") + (net 45) + (uuid "893d5477-d67b-50b1-a7f8-d48cf780ea27") + ) + (segment + (start 150.6 138.5) + (end 150.6 140) + (width 0.2) + (layer "F.Cu") + (net 45) + (uuid "989dc088-42ca-5c3a-a11c-d91a4073c5c0") + ) + (segment + (start 150.6 140) + (end 151 140.4) + (width 0.2) + (layer "F.Cu") + (net 45) + (uuid "34b27374-d6f1-5156-8d7b-8c70a07982ae") + ) + (segment + (start 137.5 115.1) + (end 137.3 115.1) + (width 0.2) + (layer "F.Cu") + (net 39) + (uuid "bd71a9bc-6763-5996-bcd6-241f62d45782") + ) + (segment + (start 137.3 115.1) + (end 134.4 118) + (width 0.2) + (layer "F.Cu") + (net 39) + (uuid "f8651ba0-669b-534b-b7a4-cdee89e0f081") + ) + (segment + (start 134.4 118) + (end 134.4 134.6) + (width 0.2) + (layer "B.Cu") + (net 39) + (uuid "ea75069a-a37e-5e67-b45c-45b9839180de") + ) + (segment + (start 134.4 134.6) + (end 136.1 136.3) + (width 0.2) + (layer "B.Cu") + (net 39) + (uuid "f99d706f-2a90-5592-aa51-16602ae6bd14") + ) + (segment + (start 136.1 136.3) + (end 136.1 145.6) + (width 0.2) + (layer "F.Cu") + (net 39) + (uuid "8299668e-04f4-58ec-97e6-a742cf88ee7b") + ) + (segment + (start 136.1 145.6) + (end 135 146.7) + (width 0.2) + (layer "F.Cu") + (net 39) + (uuid "66f96517-4207-5291-acba-592b587e9206") + ) + (segment + (start 129.6 147.4) + (end 132.2 147.4) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "c6e6454f-0c00-5db1-83ce-9952d95a0747") + ) + (segment + (start 132.2 147.4) + (end 133.2 147.4) + (width 0.2) + (layer "B.Cu") + (net 11) + (uuid "a3794b67-41d6-5962-a4b9-6f73d01cbff5") + ) + (segment + (start 133.2 147.4) + (end 133.6 147.8) + (width 0.2) + (layer "B.Cu") + (net 11) + (uuid "6e1e993e-a4c2-502b-a779-43f1e442707b") + ) + (segment + (start 133.6 147.8) + (end 133.6 149) + (width 0.2) + (layer "B.Cu") + (net 11) + (uuid "863fb034-4aee-5ca0-af75-f68cbe065b97") + ) + (segment + (start 133.6 149) + (end 129.8 152.8) + (width 0.2) + (layer "B.Cu") + (net 11) + (uuid "823cb44a-6f2c-5b54-b9f3-44a15653d654") + ) + (segment + (start 129.8 152.8) + (end 128.9 153.7) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "ed22119d-1fe3-5932-bcf8-9602e72e5459") + ) + (segment + (start 128.9 153.7) + (end 127.1 153.7) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "41783c7a-4f6c-5914-bd86-0d9269fd79eb") + ) + (segment + (start 127.1 153.7) + (end 126.2 154.6) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "2d2d4f25-d772-5186-b5c0-bffa09403db9") + ) + (segment + (start 133.6 149) + (end 135.6 149) + (width 0.2) + (layer "B.Cu") + (net 11) + (uuid "d1fd53b5-b815-52dc-81fb-643dc76b0a1e") + ) + (segment + (start 135.6 149) + (end 139.5 152.9) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "d99b7bcc-96df-57f7-9bce-4bfef18a9236") + ) + (segment + (start 139.5 152.9) + (end 151 152.9) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "26cda942-e766-577d-b13a-321dfff7e355") + ) + (segment + (start 152.5 152.9) + (end 153.4 152.9) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "a894ddc3-8f03-542a-9a0a-4e694543f73e") + ) + (segment + (start 154.2 152.3) + (end 155.1 151.4) + (width 0.2) + (layer "F.Cu") + (net 11) + (uuid "bbfb9d6c-fb96-55ad-9142-3b314e2b6335") + ) + (segment + (start 152.5 144) + (end 153 144) + (width 0.2) + (layer "F.Cu") + (net 12) + (uuid "b8fe334c-7d18-525d-96d0-c3b84a802784") + ) + (segment + (start 153 144) + (end 158.4 149.4) + (width 0.2) + (layer "B.Cu") + (net 12) + (uuid "a6e477de-9905-5ac8-8988-5840d1d10da9") + ) + (segment + (start 158.4 149.4) + (end 165.6 156.6) + (width 0.2) + (layer "F.Cu") + (net 12) + (uuid "8097b342-08df-5ccd-ac12-be07a69ae183") + ) + (segment + (start 165.6 156.6) + (end 176.8 156.6) + (width 0.2) + (layer "F.Cu") + (net 12) + (uuid "ec0dfb23-ac15-555f-9141-a1edcaca874f") + ) + (segment + (start 158.7 118.5) + (end 159.8 118.5) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "cdb9f008-67c9-57b3-88a9-b5dbe9edc81d") + ) + (segment + (start 160.6 118.9) + (end 160.6 119.2) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "f80f4d39-881c-58bf-bd3a-7c126b7d7b0c") + ) + (segment + (start 160.6 119.2) + (end 160.9 119.5) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "62818212-c4ab-5942-b4f4-25c366cacff2") + ) + (segment + (start 160.9 119.5) + (end 162.4 118) + (width 0.2) + (layer "B.Cu") + (net 16) + (uuid "ad88fe2d-38dd-54b7-8ebd-2c00155f09ad") + ) + (segment + (start 162.4 118) + (end 164.7 118) + (width 0.2) + (layer "B.Cu") + (net 16) + (uuid "4c98899f-fbe6-528e-b0ee-32820432cd7e") + ) + (segment + (start 164.7 118) + (end 165.3 118) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "94e9d7d9-a438-544e-9576-011560c8c1a0") + ) + (segment + (start 160.9 119.5) + (end 160.9 130.3) + (width 0.2) + (layer "B.Cu") + (net 16) + (uuid "c9a64f42-f33e-541b-9afc-b64b88f7bb09") + ) + (segment + (start 160.9 130.3) + (end 150.4 140.8) + (width 0.2) + (layer "B.Cu") + (net 16) + (uuid "eb5b2f19-1a95-5986-addc-a305d676e387") + ) + (segment + (start 150.4 140.8) + (end 150.4 148.7) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "677f8c2c-fd18-5809-b14e-89ba9e3e3658") + ) + (segment + (start 150.4 148.7) + (end 151 149.3) + (width 0.2) + (layer "F.Cu") + (net 16) + (uuid "d01badf1-c3e7-5acf-aa27-ac1b1b28a5e4") + ) + (segment + (start 158.7 120.7) + (end 159.8 120.7) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "38ea024d-f488-521e-b5bc-1b75ee899cdd") + ) + (segment + (start 160 120.3) + (end 160 119.6) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "ca082055-c48a-53c5-8c02-728c415c2465") + ) + (segment + (start 160 119.6) + (end 160 119.4) + (width 0.2) + (layer "B.Cu") + (net 14) + (uuid "344b78a7-e130-5be4-a5c3-f6ecebfdba07") + ) + (segment + (start 160 119.4) + (end 162.3 117.1) + (width 0.2) + (layer "B.Cu") + (net 14) + (uuid "1e56cb08-ae03-5864-9078-0647476c082b") + ) + (segment + (start 162.3 117.1) + (end 164.2 117.1) + (width 0.2) + (layer "B.Cu") + (net 14) + (uuid "011df6f3-e1a6-56b4-b4a1-75fbe2c56c7d") + ) + (segment + (start 164.2 117.1) + (end 165.3 116) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "1212a860-02a6-50dc-b85a-d6be02b53f54") + ) + (segment + (start 160.6 121.1) + (end 160.6 123.7) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "2ae4ae86-43aa-568d-9e6e-23aed49b394e") + ) + (segment + (start 160.6 123.7) + (end 161.6 124.7) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "5e563e09-cfe9-5eb9-8c55-4846fb2efa34") + ) + (segment + (start 161.6 124.7) + (end 161.6 134.4) + (width 0.2) + (layer "B.Cu") + (net 14) + (uuid "cf4896d2-08a4-50d0-baba-bd32c447e583") + ) + (segment + (start 161.6 134.4) + (end 152.3 143.7) + (width 0.2) + (layer "B.Cu") + (net 14) + (uuid "ed95490c-32c1-58ee-bdb5-cbaf2f193321") + ) + (segment + (start 152.3 143.7) + (end 152.3 147.4) + (width 0.2) + (layer "B.Cu") + (net 14) + (uuid "1b25d72b-727e-55d1-92af-e337c1936489") + ) + (segment + (start 152.3 147.4) + (end 153 148.1) + (width 0.2) + (layer "B.Cu") + (net 14) + (uuid "3f9b9331-db6a-51a4-8cd5-f1be4fc94584") + ) + (segment + (start 153 148.1) + (end 152.5 148.1) + (width 0.2) + (layer "F.Cu") + (net 14) + (uuid "54e7f93c-71e0-5e05-b4e6-68f31fbf8779") + ) + (segment + (start 121 114.2) + (end 121.8 113.4) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "bf3a2a17-1052-55e9-ac2b-e14e1e4749c6") + ) + (segment + (start 121.8 113.4) + (end 132.3 113.4) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "33c3c0a2-7985-54ec-bdee-0b0d87f1a91f") + ) + (segment + (start 132.3 113.4) + (end 139.7 113.4) + (width 0.2) + (layer "B.Cu") + (net 8) + (uuid "a6ed242d-cfec-5d52-8594-2ce39e49609c") + ) + (segment + (start 139.7 113.4) + (end 140.6 114.3) + (width 0.2) + (layer "B.Cu") + (net 8) + (uuid "275ed43c-9558-586e-8f86-1c507b259074") + ) + (segment + (start 141.7 115.3) + (end 145.7 119.3) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "f25a25e4-061c-5a2b-8274-d3e58a92bdd6") + ) + (segment + (start 145.7 119.3) + (end 145.7 128) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "9b862673-302b-5cc2-ab05-fc1be3078e03") + ) + (segment + (start 145.7 128) + (end 148.8 131.1) + (width 0.2) + (layer "B.Cu") + (net 8) + (uuid "f23ff0e4-702b-5d95-be21-22412ad6a362") + ) + (segment + (start 148.8 131.1) + (end 148.2 131.1) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "fd1176f7-0f77-5866-bd6d-939d83149d1e") + ) + (segment + (start 148.8 131.1) + (end 148.8 133) + (width 0.2) + (layer "B.Cu") + (net 8) + (uuid "e872d7df-0272-5290-8b56-347c49a9b6ac") + ) + (segment + (start 148.8 133) + (end 147.8 134) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "865e5d35-45e5-5f84-a0df-84e33b81ecfb") + ) + (segment + (start 147.8 134) + (end 147.8 137.4) + (width 0.2) + (layer "F.Cu") + (net 8) + (uuid "8ad798d2-5a5e-5129-9a2e-d351bf8646f7") + ) + (segment + (start 123.8 104.5) + (end 125 103.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "8ba007ac-4c5e-5137-971f-6c3406e0c350") + ) + (segment + (start 125 103.3) + (end 127.6 103.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "399f7022-1fbb-580c-a4b6-c136718b8d64") + ) + (segment + (start 127.6 103.3) + (end 136.7 103.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "750dcec7-9a42-50c1-bd78-dfe27ffbf06a") + ) + (segment + (start 136.7 103.3) + (end 137.3 102.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "e4e5deed-f98f-584e-ab85-8615c9da5392") + ) + (segment + (start 138.9 102.7) + (end 139.5 103.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "9adbae15-d54a-5b6d-bb91-8aa5163fe0e9") + ) + (segment + (start 139.5 103.3) + (end 141.9 103.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "9f9110ff-9a99-5148-bfad-cb5e78b42f80") + ) + (segment + (start 141.9 103.3) + (end 143.1 102.1) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "cae7f7f2-04bc-5495-b27a-85665a354ca9") + ) + (segment + (start 144.6 102.2) + (end 145.7 103.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "3bcce222-b2aa-5f4e-bf10-5be9d1b70c18") + ) + (segment + (start 145.7 103.3) + (end 157.7 103.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "04d7cc20-f534-56fc-a787-456a0c093cce") + ) + (segment + (start 157.7 103.3) + (end 158.3 102.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "1b6b2eba-f644-5adc-8762-b265628728d8") + ) + (segment + (start 159.9 102.7) + (end 165.6 108.4) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "24cf5efc-48c0-5e62-8252-de8b05d2af7e") + ) + (segment + (start 165.6 108.4) + (end 165.6 118.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "15541fb5-d629-510d-b9f5-657d0e4f93a9") + ) + (segment + (start 165.6 118.3) + (end 164.3 119.6) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "452de2b7-4541-5270-9b9a-53526f4ef950") + ) + (segment + (start 164.3 119.6) + (end 161.8 119.6) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "5eb6cbbd-b6dc-5bad-8e08-37ff36786f07") + ) + (segment + (start 162.2 121.1) + (end 162.5 121.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "5e83b89a-57d9-5a8b-90f5-846554dc533d") + ) + (segment + (start 162.5 121.4) + (end 162.5 125.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "b66dc2f4-fbe9-54fa-b20a-402698e23e56") + ) + (segment + (start 162.5 125.6) + (end 162.5 127.6) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "f30de51a-5c90-557c-b527-bff661d1b2c1") + ) + (segment + (start 162.5 127.6) + (end 161.3 128.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "08a6bd09-09b7-570e-a3e3-7655c8aef091") + ) + (segment + (start 162.5 127.6) + (end 164.8 129.9) + (width 0.3) + (layer "B.Cu") + (net 1) + (uuid "ac1123a7-a4d1-50e1-86e2-71166626d3b3") + ) + (segment + (start 164.8 129.9) + (end 165.7 129.9) + (width 0.3) + (layer "B.Cu") + (net 1) + (uuid "bdab8d19-2fb9-5965-842d-7643af99c172") + ) + (segment + (start 165.7 129.9) + (end 165.7 129.7) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "2c28fa74-cc5e-5abf-afff-b2665c7f2ebd") + ) + (segment + (start 165.7 129.7) + (end 165.2 129.2) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "57378e5a-2689-54ac-849b-259f441e6ff2") + ) + (segment + (start 165.2 129.2) + (end 165 129.2) + (width 0.3) + (layer "F.Cu") + (net 1) + (uuid "a1ba1550-8481-525e-b468-d2c5843e43ca") + ) + (segment + (start 164.8 129.9) + (end 164.8 131.8) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "96af8954-0dec-57f1-a966-da4c7b7296ad") + ) + (segment + (start 164.8 131.8) + (end 164.8 131.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "66af91ca-6733-5400-8dca-808779502a30") + ) + (segment + (start 164.8 131.4) + (end 164.6 131.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "67399de6-cffe-5071-9157-95be55c3ce06") + ) + (segment + (start 164.8 131.8) + (end 164.8 134.6) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "c2df2c75-df2c-5bd9-a24f-9a909ca2607b") + ) + (segment + (start 164.8 134.6) + (end 160.9 138.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "23704b33-17c5-5224-9b31-a635755a0a98") + ) + (segment + (start 160.9 138.5) + (end 160.3 138.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "5ca2dd23-f13d-51a2-a3a8-a7e9578204c0") + ) + (segment + (start 160.9 138.5) + (end 159.2 140.2) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "20f09fe4-b8c3-5d96-a207-f576811777b4") + ) + (segment + (start 159.2 140.2) + (end 159.2 141.6) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "679b2d6c-73b7-574a-9a08-4ff4680b339f") + ) + (segment + (start 159.2 141.6) + (end 159.2 142.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "c505a067-86ed-594d-a28b-20b8e45a8058") + ) + (segment + (start 161.6 137.8) + (end 164.3 140.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "00b81735-2a02-593e-93f1-61e8d1907de6") + ) + (segment + (start 164.3 140.5) + (end 163.8 141) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "6bd7ff85-41d1-568a-99b9-132a6ac4327c") + ) + (segment + (start 164.3 140.5) + (end 168.2 140.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "717cd92b-65ec-5af4-aa14-1e67720b8c56") + ) + (segment + (start 170.1 143.4) + (end 172.1 145.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "17a728a4-506b-5fdf-81f3-af1d66389a11") + ) + (segment + (start 172.1 145.4) + (end 175.6 145.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "3bf091c7-efcb-5c20-8d66-eb71efd7bbbf") + ) + (segment + (start 170.1 139.6) + (end 173.5 136.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "2a2f1c1a-0da7-5172-86dd-4c4926c62729") + ) + (segment + (start 173.5 136.2) + (end 174.8 134.9) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "e761ff3a-96df-5d84-9da2-465076366e14") + ) + (segment + (start 174.8 134.9) + (end 175.6 134.9) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "f1e1f668-056c-5aaf-8139-57e084647d4a") + ) + (segment + (start 176.9 133.8) + (end 178.1 132.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "7e607976-e093-5b57-8340-164642631c42") + ) + (segment + (start 178.1 132.6) + (end 178.1 125.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "ce4fd70d-3e7e-5a3b-ac65-4f1ef9476af4") + ) + (segment + (start 178.1 125.5) + (end 176.9 124.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "efc9c532-8ba0-59ba-8679-522110f3b8e5") + ) + (segment + (start 159.2 141.4) + (end 155.6 141.4) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "af0c9a1d-e7c9-58ee-bf42-ff34126c3683") + ) + (segment + (start 155.6 141.4) + (end 153.6 141.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "9f569167-085b-52de-961c-e2d572e752e5") + ) + (segment + (start 153.6 141.4) + (end 153.3 141.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "5b37db96-3fee-51a4-a1ea-1af6c9115176") + ) + (segment + (start 153.3 141.7) + (end 150.1 141.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "0421fa8a-5c5d-5aac-a442-acfcd10b8fdd") + ) + (segment + (start 150.1 141.7) + (end 149.6 141.2) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "ebe1e773-9df0-56db-a61f-dcca5c2848c3") + ) + (segment + (start 149.6 141.2) + (end 149.1 140.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "dda0762a-ccb4-5f9b-8a78-98f8e324f21f") + ) + (segment + (start 149.1 140.7) + (end 149.1 138.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "c9bedc0a-031e-5906-a932-c0794116880d") + ) + (segment + (start 149.6 141.2) + (end 146.3 144.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "c2ba2d1a-b38e-5fac-b24d-f7d97d1d4b83") + ) + (segment + (start 146.3 144.5) + (end 146.3 146.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "afbe60e7-cdeb-57a3-b1de-b00a0596812e") + ) + (segment + (start 145.9 147.1) + (end 145.9 147.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d1c10133-71de-57ce-9cf3-467201127552") + ) + (segment + (start 145.9 148.5) + (end 145.9 149.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d91a5707-6e4a-5c27-a0da-1be8cefa0d12") + ) + (segment + (start 145.5 146.7) + (end 144.9 146.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e2cc71a3-2d65-56ff-8ca2-385b7485103f") + ) + (segment + (start 144.1 146.7) + (end 143.5 146.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "a774b8e4-f8e4-5cd9-8f56-b6afb3abe891") + ) + (segment + (start 143.1 147.1) + (end 143.1 147.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "7ac7414a-aca2-579f-a722-fcfb7fded8f0") + ) + (segment + (start 143.1 148.5) + (end 143.1 149.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "dd7a858d-eb22-5108-88b1-2b3641ce8268") + ) + (segment + (start 158.9 143.5) + (end 158.3 144.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "4c96cbe7-63ea-5c66-9dad-47e93b8dec61") + ) + (segment + (start 158.3 144.1) + (end 158.3 146.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "ac06e6f4-e836-59bf-b70e-64d93afc18a0") + ) + (segment + (start 158.3 146.6) + (end 160 148.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "704ba90a-fa27-563f-b956-4bd51236f024") + ) + (segment + (start 160 148.3) + (end 160 149) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "0e59055b-5ca3-55e8-9e1e-e5dffa0708b1") + ) + (segment + (start 160 149) + (end 158.5 150.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "a0fe58af-ddaa-535c-961b-c96b42ca3b6f") + ) + (segment + (start 158.5 150.5) + (end 157.9 151.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "da111f93-2b6b-5518-9b67-9152520f4e3b") + ) + (segment + (start 157.9 151.1) + (end 157.9 153.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d815252a-6025-583f-9164-b8df2d5d8bac") + ) + (segment + (start 156.8 153.2) + (end 156.7 153.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "5e6ab1e0-6f25-57f9-bbd7-6a28ef07a739") + ) + (segment + (start 156.7 153.1) + (end 155.8 153.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "89f03308-9606-5c6c-8bd9-aa567a4a051c") + ) + (segment + (start 155 153.1) + (end 155 153.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "6a7b746a-fbd7-5be5-b497-82c6bf5e23dc") + ) + (segment + (start 154.6 153.8) + (end 154 153.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "04d1f93e-2f7d-5f3a-aebe-ab6b8b60f498") + ) + (segment + (start 154 153.8) + (end 154 154.4) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "d995192c-3bf1-59c5-a847-20c3eeef43ed") + ) + (segment + (start 154 154.4) + (end 153.1 155.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "47fc6db5-140a-5328-a267-4a0877534c19") + ) + (segment + (start 153.1 155.3) + (end 152.8 155.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "4b385fbd-59be-5362-bade-3b8a783ad98b") + ) + (segment + (start 152.8 155.6) + (end 152.5 155.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e48c143a-c278-5127-80e5-01f6d1d47829") + ) + (segment + (start 160.6 128.8) + (end 154.7 122.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "2eb4cbd0-60f9-5a67-8b33-7f1121c98ab4") + ) + (segment + (start 154.7 122.9) + (end 152.2 122.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "0ae6983a-3bcb-5ce1-a266-a681c65036b0") + ) + (segment + (start 152.2 122.9) + (end 151 121.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "536857be-15e4-5e8f-8f0f-a5fc6c07616b") + ) + (segment + (start 151 121.7) + (end 150.5 121.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "b4f8727c-a42c-5e96-b453-7d4fc06d3f3f") + ) + (segment + (start 176.9 146.5) + (end 178.9 148.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "8c8fc83d-6c4b-529c-b42f-1f08943e4c79") + ) + (segment + (start 178.9 148.5) + (end 178.9 157.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "93307091-8dc8-57d6-ab3e-31d4bd95c4d9") + ) + (segment + (start 178.9 157.9) + (end 177.9 158.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "80a7b027-e69b-5e37-87f7-bad18b5df340") + ) + (segment + (start 142.7 149.9) + (end 140.9 149.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d07b8d0a-13c8-54ea-8743-2b9cee4ad7f8") + ) + (segment + (start 140.9 149.9) + (end 139.2 151.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "d230ba69-3f2c-561c-84bd-d72a29cedaa8") + ) + (segment + (start 139.2 151.6) + (end 138.2 152.6) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "5be97f01-72d7-530c-b456-ec75c64557fd") + ) + (segment + (start 138.2 152.6) + (end 135 155.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "3f6385d7-09af-5a43-8137-e903de7c91e9") + ) + (segment + (start 133.5 155.6) + (end 129.8 155.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "543236d3-7ccc-5972-9f6c-1e5989cb4775") + ) + (segment + (start 129.8 155.6) + (end 129.6 155.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "f146b719-30e3-5567-a557-febd59cd11e6") + ) + (segment + (start 128.8 155.8) + (end 128.2 156.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "978b2f8e-8363-5c5d-bf08-7bedf537dc3c") + ) + (segment + (start 128.2 156.4) + (end 125.1 156.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "ce632f18-2707-5b73-b162-daba8a068655") + ) + (segment + (start 125.1 156.4) + (end 124.1 155.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "989a9c04-066f-589b-86fd-1b7f508680aa") + ) + (segment + (start 139.2 151.6) + (end 139.2 151.4) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "35b1b1c3-797d-5bfc-a6f1-3bcb720bdff8") + ) + (segment + (start 139.2 151.4) + (end 129.5 141.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "ffbaf009-3bfb-5a80-98c9-50389793753b") + ) + (segment + (start 129.5 141.7) + (end 128 141.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "381c8b08-d4d9-5425-bdb8-bb11cbf3a500") + ) + (segment + (start 128 141.7) + (end 127.6 141.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "0f531cb9-276e-534c-b311-9e7977bbe72e") + ) + (segment + (start 127.6 141.7) + (end 127.4 141.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "32f5dc62-a94b-5d3f-9c40-5ea918f846ad") + ) + (segment + (start 127.6 141.7) + (end 127.6 140.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "c4cc1def-6016-596f-91bb-4fa2063ea192") + ) + (segment + (start 126.6 141.8) + (end 125.9 141.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "2f5056ee-6e98-5b8f-8cf9-820bb175551c") + ) + (segment + (start 125.9 141.1) + (end 123.5 141.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "df6094a8-8562-5751-b47c-215a1b7e52f6") + ) + (segment + (start 123.5 141.1) + (end 122.5 140.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "691d9c8c-e7c1-50a7-b507-a2d0557522d0") + ) + (segment + (start 121.4 140.5) + (end 119.6 142.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "3a8d92dd-4758-58e4-855e-5ccdfde315f9") + ) + (segment + (start 121.4 138.7) + (end 121.4 136.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "475e194d-3ffe-55a2-bcd2-bb48f78b445c") + ) + (segment + (start 121.4 136.7) + (end 120.8 136.1) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "64389be0-21b1-55d4-b124-eea03109aa63") + ) + (segment + (start 118.6 142.7) + (end 112.7 142.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "4253b04c-189a-5ce3-a628-22f9f87639a0") + ) + (segment + (start 112.3 143.2) + (end 112.3 145.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "0bee767c-0f9f-5236-b8b3-495c025ddabf") + ) + (segment + (start 112.7 146.2) + (end 114 147.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "02d56a39-3035-52d2-9262-203b577bacac") + ) + (segment + (start 114 147.5) + (end 114.6 147.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "86bfc301-1208-5958-b021-7ba1b46e9fed") + ) + (segment + (start 114.6 147.5) + (end 116.2 149.1) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "3e7173c6-e363-568d-a4be-91891672327b") + ) + (segment + (start 116.2 149.1) + (end 116.2 149.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "3345792a-2556-504a-874e-77e535abd7f0") + ) + (segment + (start 116.2 149.7) + (end 115.6 150.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "6c3d9cb5-bd23-5762-a642-78119b3f20d0") + ) + (segment + (start 115.6 150.3) + (end 111.4 150.3) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "ab30219c-c7c4-5a64-80cd-a56decc8604e") + ) + (segment + (start 111.4 150.3) + (end 110.6 149.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "7ebe9df2-c464-57fa-b298-993a956d3f70") + ) + (segment + (start 110.6 149.5) + (end 109.3 148.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "0492391c-89d1-5f40-b009-612fc6f0370a") + ) + (segment + (start 109.3 148.2) + (end 109.3 147.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "78c5965b-465f-5a5c-ae39-b0a25dd668d9") + ) + (segment + (start 112 142.3) + (end 111.4 141.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "4f295140-bdae-5a51-8a6c-ba6253509b1b") + ) + (segment + (start 111.4 141.7) + (end 110.4 140.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "4bdedc7e-4cd0-59fc-a79b-b0f5d0f963f2") + ) + (segment + (start 110.4 140.7) + (end 109.4 140.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "8b7b54be-604f-5f58-bc3a-23c27e0d7e89") + ) + (segment + (start 109.4 140.7) + (end 109.3 140.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "5fa81f3e-59d4-5105-8e42-40aacc8a6243") + ) + (segment + (start 109.3 140.8) + (end 108.4 139.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "6ccea88b-c083-5780-8acc-d7747ea887f3") + ) + (segment + (start 108.4 139.9) + (end 107.5 139.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "71590eaf-3b03-5901-ad68-352938ce5cec") + ) + (segment + (start 105.5 139.7) + (end 103.1 139.7) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "b85fd822-7924-5e60-83e3-3b8283edd246") + ) + (segment + (start 109.3 147.3) + (end 107.9 147.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "11c2ba2f-aeb4-5ed8-be11-5b38d7d1a918") + ) + (segment + (start 107.9 147.3) + (end 107.3 147.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "a468684e-d9db-503b-a580-c0c293fcfeda") + ) + (segment + (start 105.5 148.3) + (end 103.1 148.3) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "a8d63f08-0e5e-5e93-a18f-3a783f1212c3") + ) + (segment + (start 128 138.7) + (end 128 136.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "9f8b04f0-ff61-59a3-b613-00862a22f6d1") + ) + (segment + (start 128 136.9) + (end 132.2 132.7) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "3f48e7dd-8ac4-55cc-8bff-b81829af7854") + ) + (segment + (start 132.2 132.7) + (end 132.2 130.5) + (width 0.5) + (layer "B.Cu") + (net 1) + (uuid "b678fd8f-37df-5313-b868-94964cef8ca2") + ) + (segment + (start 132.2 130.5) + (end 132.3 130.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "cb858f94-5c51-5724-87a6-3a64be3f95de") + ) + (segment + (start 132.3 130.4) + (end 132.8 130.4) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "67d2afa2-8bd0-535d-b57c-3ec59f28986e") + ) + (segment + (start 133.6 129.6) + (end 133.6 129.5) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e82caabe-008c-5d93-95a1-57a8dc6e8964") + ) + (segment + (start 133.6 129.5) + (end 134.2 128.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "2808293f-e004-531c-a87b-e93d5ac8247f") + ) + (segment + (start 134.2 128.9) + (end 136.1 128.9) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "1396f1f0-956f-525c-a4cd-27f0a07c458d") + ) + (segment + (start 136.1 128.9) + (end 136.8 129.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "3d3a1afb-b33b-5a18-ae71-fe05ae176749") + ) + (segment + (start 107.2 139.2) + (end 107.6 138.8) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "e28e9dc2-9e49-510d-bb71-29072607ff44") + ) + (segment + (start 107.6 138.8) + (end 107.6 127.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "46f4b087-4697-5083-9c61-c26045b74f8a") + ) + (segment + (start 107.6 127.6) + (end 106.6 126.6) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "11dc0957-d238-5950-8766-3ddee544273d") + ) + (segment + (start 134.2 128.9) + (end 127.5 122.2) + (width 0.5) + (layer "F.Cu") + (net 1) + (uuid "a9dec61a-46fb-5b41-b05e-ae5645feadae") + ) + (via + (at 106.15 143.25) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 30) + (uuid "e8b4f478-003e-54c2-a6eb-415b23a87de8") + ) + (via + (at 106.15 144.25) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 30) + (uuid "cd952857-296f-5568-b61d-518769690fe2") + ) + (via + (at 110.55 149.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "586985b1-3d06-5da5-aade-e383ef3cab8f") + ) + (via + (at 161.775 119.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "345d76af-cd4d-54af-9419-6896fea1efaf") + ) + (via + (at 108.2 148.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 30) + (uuid "34a5bdb9-4dd6-50ed-8569-2ff227dc8081") + ) + (via + (at 109.6 141.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 32) + (uuid "74f1d9e4-deb2-5ae0-8b6c-f1d1456682ea") + ) + (via + (at 109.6 146.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 32) + (uuid "5ff1ff2e-026b-5cce-b8a6-fb47e5ce631b") + ) + (via + (at 115.3 149.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 32) + (uuid "a44435db-c23d-5f4e-b3a9-6cc2079fd43d") + ) + (via + (at 119.3 103.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 38) + (uuid "3fae448d-f4aa-5510-a654-30890d673f8d") + ) + (via + (at 119.1 105.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 37) + (uuid "65b9781d-3250-513e-928b-71d842392109") + ) + (via + (at 119.8 108.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 2) + (uuid "86e58ffc-aa02-5710-8e26-3de47ce0abe5") + ) + (via + (at 119.8 111.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 2) + (uuid "1553522c-6ca5-59e2-94f8-648498bacc29") + ) + (via + (at 117.7 137.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 4) + (uuid "8ae269ac-6228-52b5-a488-f598f028eacb") + ) + (via + (at 124.2 137.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 4) + (uuid "7cebb33f-425d-56b1-a1a2-8f575b5d604a") + ) + (via + (at 138.7 112.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "020dc181-ca4f-5bd6-9967-4af8cfd1c3e2") + ) + (via + (at 139.9 130.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "2d1ee3f1-4f23-5ee5-9f86-dd471a1a1df1") + ) + (via + (at 136.5 133.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "01a77f9b-0c1a-5b45-a333-82d0db3c0050") + ) + (via + (at 150.1 131.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "924ea8e2-b7a1-557c-a1a3-ac789afd616c") + ) + (via + (at 151.9 133) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "69efe09d-0534-572a-a847-dc4d96ae81d1") + ) + (via + (at 160.1 141.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "762bedd9-9ebb-52d5-894e-114823e29fe9") + ) + (via + (at 161.3 144.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "ea6b0d3c-5bd6-58ec-a682-214c08bf346e") + ) + (via + (at 153.1 150.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "734351bf-4896-5ba8-9c98-8df702fa4661") + ) + (via + (at 153.1 153.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "273cdc90-e4cf-51b3-abec-29535c79578b") + ) + (via + (at 140 129.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 27) + (uuid "3019d44e-71f7-57a8-bb8c-fe2e8bbfbc10") + ) + (via + (at 139.8 132.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 27) + (uuid "f58d0f9c-4e28-521b-bce3-67fb233eedb5") + ) + (via + (at 135.8 130.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 22) + (uuid "18492c52-14c8-58c1-adfd-fd6f532e4f4b") + ) + (via + (at 135.8 132.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 22) + (uuid "f64b4351-6bed-5ddb-a06c-fc63901c337c") + ) + (via + (at 128.3 148.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 25) + (uuid "80c84275-312c-5677-af0f-c9048bcd2c07") + ) + (via + (at 129.9 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 25) + (uuid "a43f0f97-f108-573d-9d1f-7d300a3703f3") + ) + (via + (at 123 146.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 10) + (uuid "01978fa6-c602-52b4-8de2-80ef019ed444") + ) + (via + (at 128.7 146.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 10) + (uuid "77bf02df-a605-57cc-a7fc-8738a00fadb1") + ) + (via + (at 127.1 151.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 10) + (uuid "5af81583-6926-5409-905b-319cd63c6717") + ) + (via + (at 121 144.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 28) + (uuid "3b20f73c-051c-58eb-bf72-f94f3330263b") + ) + (via + (at 132.1 148.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 28) + (uuid "429a5a88-81c6-530f-ae24-54d87f2915a6") + ) + (via + (at 118 145.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 29) + (uuid "f375a0d3-bffa-5431-a010-dda92a2d8e37") + ) + (via + (at 128.4 152.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 29) + (uuid "c27eb838-dc73-52b9-a1ab-90f56e165ff2") + ) + (via + (at 161.5 136.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 20) + (uuid "7a1e0ad2-589b-595a-9264-902d4a24b773") + ) + (via + (at 157.8 140.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 20) + (uuid "8d49de4b-b81a-59d6-8039-560adaefce4b") + ) + (via + (at 132.9 148.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 18) + (uuid "17447105-c604-5fc5-8ee8-3a88b310f344") + ) + (via + (at 130.3 151.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 18) + (uuid "082da55d-2f64-5ebc-8fb5-e5983d028588") + ) + (via + (at 128.6 153) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 18) + (uuid "ae1e9329-fc68-5628-8920-2ab3c2953188") + ) + (via + (at 152.9 135.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 46) + (uuid "5903d9cd-4b6f-5e01-88ba-1875c6203759") + ) + (via + (at 135.1 134.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 40) + (uuid "3e864458-47a4-5439-9cc4-911fc52c0788") + ) + (via + (at 171.5 127.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 15) + (uuid "7415f7e0-2a96-56c9-941b-1e162c674061") + ) + (via + (at 157.9 147.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 13) + (uuid "ccd9b06a-eba8-51af-bd76-ac3fa183dac2") + ) + (via + (at 159.1 148.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 13) + (uuid "3fb18cf7-af3b-5582-80e7-3ce8b1714ba2") + ) + (via + (at 152.2 136.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 45) + (uuid "a1aec288-1c58-5dd6-80f5-f14026044ec8") + ) + (via + (at 134.4 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 39) + (uuid "1d19b779-c43c-5aa9-9c15-69879c077dc4") + ) + (via + (at 136.1 136.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 39) + (uuid "0822c9ba-f42d-50e4-9e27-b7e6a6fd661b") + ) + (via + (at 132.2 147.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 11) + (uuid "a2f4c5e8-65ba-590b-94a6-c420554fb099") + ) + (via + (at 129.8 152.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 11) + (uuid "37e8b737-da0f-555a-9774-f117e7d53c9f") + ) + (via + (at 135.6 149) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 11) + (uuid "ed211351-c8db-5b85-89f3-395f5c75bce9") + ) + (via + (at 153 144) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 12) + (uuid "ba29a340-c0fc-5ba6-b714-18b9c2b95482") + ) + (via + (at 158.4 149.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 12) + (uuid "a7dbfe52-8348-5dda-b136-f2f325f26e8a") + ) + (via + (at 160.9 119.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 16) + (uuid "a13b5869-3155-5395-837c-52f67e58e7e7") + ) + (via + (at 164.7 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 16) + (uuid "03521e88-d80a-5e0b-92d1-47a52edbc031") + ) + (via + (at 150.4 140.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 16) + (uuid "0456bf86-6f25-534e-8442-f57d2596625b") + ) + (via + (at 160 119.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 14) + (uuid "cef7a820-b2e5-5bd7-87d7-15c04c6d978b") + ) + (via + (at 164.2 117.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 14) + (uuid "d0873704-3eaf-5049-8033-f9b4d09d8423") + ) + (via + (at 161.6 124.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 14) + (uuid "a7fb70d0-812e-5234-b271-4a4be14cb9de") + ) + (via + (at 153 148.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 14) + (uuid "e98c7cdd-2c0e-59f6-bd1d-7df698f09592") + ) + (via + (at 132.3 113.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "9be12e93-f5b1-59fd-b9a9-213290336f4b") + ) + (via + (at 145.7 128) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "9b58fd12-d180-5bcc-ac0b-6b6b5f010b90") + ) + (via + (at 148.8 131.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "813ccef2-3917-55d8-adbb-7437dc1a3c4c") + ) + (via + (at 148.8 133) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 8) + (uuid "ea28cfcd-2002-568f-ba4a-d9a983ea4437") + ) + (via + (at 127.6 103.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5dbc9489-fa17-576c-9411-4a49b01fa9d6") + ) + (via + (at 162.5 125.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "432ef993-eefa-5bd7-8076-1e6f60e79945") + ) + (via + (at 162.5 127.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5f0e655f-ba1d-5633-acff-8ebb6011595c") + ) + (via + (at 165.7 129.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "824a2806-6954-5316-86d8-26a35f517758") + ) + (via + (at 164.8 131.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e102ed78-91f7-5c27-b9cf-8e0f94936e04") + ) + (via + (at 160.9 138.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "ec39a0b5-9a1b-5ca6-bca5-d340dba4b0ef") + ) + (via + (at 159.2 141.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7bf251f4-658c-5eaa-bf00-95f89db0907c") + ) + (via + (at 164.3 140.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "43980d62-11c0-5b18-847f-a04c643c3070") + ) + (via + (at 173.5 136.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1455977f-6b85-58ef-90f9-8b62d350d635") + ) + (via + (at 155.6 141.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "712c8bf1-3593-5068-bcdf-f1f0c314ffdd") + ) + (via + (at 153.6 141.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7b658b6e-6283-58f3-ba57-af163850ec51") + ) + (via + (at 149.6 141.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "78dd6073-65a1-5700-b189-1988772a4bab") + ) + (via + (at 158.3 146.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5ebf756c-f1ef-58c2-b1be-baf62792e4b5") + ) + (via + (at 158.5 150.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "80388d26-e40a-56be-b16f-3127981ca485") + ) + (via + (at 154 153.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2ad320b7-2b03-54f9-bc5e-a6c190963076") + ) + (via + (at 153.1 155.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "21e81282-d51f-5744-9ded-f66f44ed29c5") + ) + (via + (at 152.2 122.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2b00c111-932b-52f4-997d-faf960b7caad") + ) + (via + (at 151 121.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7ff5f7f6-b8c4-5329-bfbc-1dc628e68b3f") + ) + (via + (at 139.2 151.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7747e42b-e3c5-52d8-84e4-287ba6cbfd42") + ) + (via + (at 138.2 152.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e8c1a093-0805-5178-b278-e53504288e4b") + ) + (via + (at 128 141.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "45a63c22-51d6-5cb4-8f0a-f26f1034e99e") + ) + (via + (at 114.6 147.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "84900295-d0fb-5e1e-a33e-cd583d9554be") + ) + (via + (at 111.4 141.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3a2aa1a2-7c30-5090-b4a7-feadacdce103") + ) + (via + (at 109.4 140.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b780fddb-b888-5723-853b-693d6c0b2a05") + ) + (via + (at 128 136.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a414a80f-8395-5858-b6bc-2128f5baae6c") + ) + (via + (at 132.2 130.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "84b083bd-6545-57f3-8abb-22acfffc381f") + ) + (via + (at 102 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c33cd996-4c64-52f3-b72a-25d37b2601ea") + ) + (via + (at 106 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4ccb6e22-8e11-5396-9351-93b0e6ea1a0e") + ) + (via + (at 110 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "50cfaed2-4ca8-5b67-874a-6e51f705b3f9") + ) + (via + (at 114 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e2ecbc3e-3030-5646-ab1c-922a5d9da47a") + ) + (via + (at 118 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f134eb97-9efc-5925-86a3-17acb6d9dd59") + ) + (via + (at 124.9 103.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "69522d60-565e-5445-9bb2-988f979712fc") + ) + (via + (at 138 103.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9c3cb687-e38b-5366-83a0-31cbb10d77f5") + ) + (via + (at 142.6 102.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b7f3057a-7650-57c8-883c-10ad6f355612") + ) + (via + (at 145.1 102.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "54463d19-539a-5b55-a27f-005d726aa2a0") + ) + (via + (at 157.7 101.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "fa0d153c-cf5c-5ae3-99f6-4d12ebf59a7a") + ) + (via + (at 162 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "14d04962-efdb-5373-92bc-9bbdbd9babca") + ) + (via + (at 166 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b98499f8-0118-5b7d-a88b-46043861477a") + ) + (via + (at 170 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "146f004d-04a4-52e6-870f-a9333da6342d") + ) + (via + (at 174 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d0c8bb59-5f54-50c1-a0f4-d9f8b08c1ad9") + ) + (via + (at 178 102) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f9f9e20f-c05a-5dca-ae95-36e176624db7") + ) + (via + (at 102 106) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d70980b2-3779-5d54-ac36-7aabb1b4634d") + ) + (via + (at 122 106.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "ce306cf1-7ef4-59f6-b595-5428d0561692") + ) + (via + (at 125.3 105.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4d02c224-e2d3-5596-9536-77a76ff48886") + ) + (via + (at 138 106) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5c6aaa2f-e049-5980-8e47-85311dba9ca3") + ) + (via + (at 142.5 106) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "093f6b7b-ef48-5031-a052-f1a1f6ce1d62") + ) + (via + (at 146 106) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e590cc31-1570-528b-832e-11eb58bd7650") + ) + (via + (at 149.8 106.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "54ed8d0d-cad6-59b4-b4a4-07a4291ed212") + ) + (via + (at 178.1 106) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f56c9098-8ef4-55ca-8741-bea36b323916") + ) + (via + (at 102 110) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0c9179a5-ae55-5082-8ee3-80a696625321") + ) + (via + (at 106 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "577a3bdc-fb2a-58df-9b85-8824230f2c24") + ) + (via + (at 110 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5e36e79c-cfb6-5af0-8257-2d959b6d3ca4") + ) + (via + (at 114 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1502e5e8-740e-5dc2-879c-a89924cc57b5") + ) + (via + (at 118 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6c37aead-195a-581b-9c5f-f6f2f0ca4897") + ) + (via + (at 122 108.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1b0ec34f-4dfb-5a33-b898-880a20223209") + ) + (via + (at 135.7 110) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "89319b7c-6ef9-597f-8937-a3804c2f2b6a") + ) + (via + (at 138.1 109.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c44e10a7-0896-5b51-a29a-2f4f1c7bb389") + ) + (via + (at 142 110) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "91d80e13-c11e-511e-b939-97d5b0fba54b") + ) + (via + (at 146 110) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "17303f2b-e022-57c7-b43f-e00d3fdb705c") + ) + (via + (at 150 110) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "928a473b-83ef-54d3-9a7e-eabb5da1ed5c") + ) + (via + (at 153.8 110.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "23a684d4-333c-574a-b46b-b65299630cc9") + ) + (via + (at 158 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "96450732-c4bd-53fe-b1ed-8ac312ad8792") + ) + (via + (at 162 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "8d9ff622-8ac6-5129-b2b6-b37f01e87965") + ) + (via + (at 166 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a2d79c01-f42e-5566-af3f-68f655ef6cba") + ) + (via + (at 170 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e8964a81-6f28-5c67-bbb0-12f66383149a") + ) + (via + (at 174 111.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "afca88e0-0e9e-5b03-a203-fbc544aa48ab") + ) + (via + (at 178 110) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "61463de0-cd67-535c-b255-112c5f5b4e75") + ) + (via + (at 102 114) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "8530a01b-a76d-5efc-b0d0-cb26cc8149c5") + ) + (via + (at 106 114) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "885682bc-3cbc-53ba-bf80-d6d72576b317") + ) + (via + (at 110 113.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "89fe4919-c669-56f0-a435-7bd5abb60add") + ) + (via + (at 114 113.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "66729501-1f8c-5fee-8a38-40b08e5732e5") + ) + (via + (at 117.8 114) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0daa15c9-0754-5624-9b8c-002f77c1929c") + ) + (via + (at 142.6 115.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e8ed169a-0387-5a4c-ac0b-8554233d0bc2") + ) + (via + (at 145.7 113.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "00749109-445d-5cab-86b1-917c35755cf3") + ) + (via + (at 150.1 113.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6fa7964a-2221-5655-8ee0-359231fb6037") + ) + (via + (at 154 113.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6a2e752b-69f9-532e-ad92-11598ce37db6") + ) + (via + (at 157.9 113.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "127d054c-9acc-51a9-9a95-dcf710080a2c") + ) + (via + (at 162 114) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "74d0a476-33e3-5ac0-9fad-474b315417fb") + ) + (via + (at 166 114) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "25b5ee4f-bce4-5a37-af05-f934f7ae8a54") + ) + (via + (at 170 114) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c542e3f8-6ab8-520e-9daa-922b7ff72bce") + ) + (via + (at 174 114) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5a9213d8-f436-51e5-9eec-5114015b22c3") + ) + (via + (at 178 114) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "213bcccf-0db5-5b2d-987d-3e409e4f982f") + ) + (via + (at 102 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "cedb99d9-92f5-5ae7-8266-2aa91704dd4a") + ) + (via + (at 106 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0bc303ef-fa01-5440-8bf3-6faa0efdb073") + ) + (via + (at 110 118.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "17595f6c-311e-5a3f-99c1-e1ffa24f8eb4") + ) + (via + (at 113.6 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b9c6b3a6-33ea-52cd-b9bc-b4577b6840ca") + ) + (via + (at 117.8 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "8fa11c5f-ae3e-5ee2-a8a0-d69ca5b3e16f") + ) + (via + (at 142 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e5973272-8219-58ba-a52b-60ac3736170d") + ) + (via + (at 146 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "53f69340-cb2f-5481-ad3e-333b858ce62b") + ) + (via + (at 150 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "600a64c6-fb8c-5bbe-8f7d-a3235bf01ee6") + ) + (via + (at 152.7 117.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9b56f5ab-4292-56ca-9f43-cdc7a82d2255") + ) + (via + (at 166.5 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1cc6fc78-d3e2-59b0-b0c7-dc10167d0aaa") + ) + (via + (at 170 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "07e6a745-337b-5560-9f3c-ce27426892eb") + ) + (via + (at 174 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "28616981-b044-551a-89a9-57fec1aa9708") + ) + (via + (at 178.1 118) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "ae151816-86ca-504d-af8c-2392aee2586c") + ) + (via + (at 102 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6e24ecb1-8bdf-5544-80b3-2fee8b8c55bb") + ) + (via + (at 106 122.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "aaa3abab-a7e3-586d-86f5-e27299b86573") + ) + (via + (at 110 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6ec4af22-fa57-5237-ad9b-eef90d1b1ef2") + ) + (via + (at 114 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3b43c342-dd44-55fd-9922-7221a7eb91b7") + ) + (via + (at 118 121.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7e84e45c-50d0-5326-82c0-9d7b3f45ddee") + ) + (via + (at 122 122.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "09984d25-76cf-548c-a09a-0d7090e9f749") + ) + (via + (at 126 122.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "25d4a084-bd73-56f1-8172-e46cfe782e71") + ) + (via + (at 130 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c16dd082-8937-51a3-85e3-2a6b291d7d72") + ) + (via + (at 133.7 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "535d3378-b494-580e-be43-0354e2cd9866") + ) + (via + (at 138 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f6a09c0e-edb2-5a0a-8a4e-daf903dc97c2") + ) + (via + (at 142 122.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6a2d8d64-7bda-53c6-8186-091ba2002025") + ) + (via + (at 146.4 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d98a6686-eb9b-5ca3-8282-383eb7908827") + ) + (via + (at 148.9 122.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d3fccdbf-948d-5856-8938-c2a69230bc55") + ) + (via + (at 162 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "476c06b5-4f30-51f0-b95a-3abd8bd64b3b") + ) + (via + (at 164.5 121.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2c1b5929-449d-5a32-ace3-b1048ddb2fa4") + ) + (via + (at 170 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e14d8e74-efb8-5c01-ab68-1189be43c9ce") + ) + (via + (at 174 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "51274870-82c9-5e06-bd86-743468f954eb") + ) + (via + (at 178 122) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5cc1fb24-2c1f-5399-902b-c468a1b4502b") + ) + (via + (at 102 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2a035021-4757-542e-b528-844ce6879f91") + ) + (via + (at 105.2 126.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "60cac19e-abe3-52fe-9b0e-96790c4983bc") + ) + (via + (at 110 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d74e28f8-24d5-5c88-9857-5757ae619a43") + ) + (via + (at 114 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a0553da0-eb7e-51c4-acc3-fcde0752bce0") + ) + (via + (at 118 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "fd266850-e8e1-5b6a-a40e-264e1bae712a") + ) + (via + (at 122 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "87c8e935-3d52-5dac-a1ea-89358c7d268e") + ) + (via + (at 126 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d521bbb4-b25e-51ee-bd83-ce4952405d18") + ) + (via + (at 130 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "55f8419c-bbaa-5abc-8dba-774e705fb690") + ) + (via + (at 133.7 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5258e84b-0bb4-50ed-864a-f17b42dfa82c") + ) + (via + (at 138 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "00e2129c-f142-5a48-ae99-1d618bbb8a17") + ) + (via + (at 142 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "320797e4-0f5b-5985-b9fa-627e9d764882") + ) + (via + (at 146.4 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "835483db-7a57-55c1-8874-0f9030dbb3ca") + ) + (via + (at 150 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d945666d-5b17-531d-8edc-f8a00d34b032") + ) + (via + (at 152.2 127) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "17f70db7-13c4-5087-9542-760a501f92e5") + ) + (via + (at 159.5 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e468a5d8-19b5-5398-9848-07fc32412369") + ) + (via + (at 166 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4c737c50-530e-5ac8-a781-7a9ac0ecf4ff") + ) + (via + (at 170 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b7a0b6ca-b070-5ff6-b724-65450da61373") + ) + (via + (at 174 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "866d0813-25f7-5089-99cd-d720be687b01") + ) + (via + (at 178 126) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5ce2bf1c-7c8e-59d1-a584-3fd3d7715374") + ) + (via + (at 102 130) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e2d068fe-a533-5f7a-a47a-66bc74eef570") + ) + (via + (at 106 131.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "8fba3729-ac5c-505e-addf-da6a507df4f1") + ) + (via + (at 110 130) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "53b3b558-a579-5811-a16e-043fb7e06a52") + ) + (via + (at 114 130) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d3164e3f-7677-5485-a6e0-ea5b739f98f0") + ) + (via + (at 118 130) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c6009475-51ee-56c6-ad89-17077c3070e9") + ) + (via + (at 122 130) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "24960651-a4bc-5dde-b15c-12007a58d7da") + ) + (via + (at 126 130) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5e123d9b-1e71-55b4-bb8e-c59d38d9f23d") + ) + (via + (at 130 129.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "dab677ec-8777-54f0-bc15-52bb2b0abdf3") + ) + (via + (at 133.7 128.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "75c1ea99-f65a-516e-a174-d804c8fa1036") + ) + (via + (at 138 129) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "034e2a4b-4012-5c36-b19c-0066bf6476ec") + ) + (via + (at 142 129.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b302b800-b148-55c4-a949-4eede59430bc") + ) + (via + (at 145.7 129.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a283cd77-2605-5f42-b6a0-7cd1cd6cef1a") + ) + (via + (at 150 129.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e9d45c16-aa74-5fb0-a583-07ec20d03651") + ) + (via + (at 152.2 130.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "baaafd3f-9a15-500c-b0ca-0e7c6d6a6c29") + ) + (via + (at 159.1 131) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6ed4bf93-7cc5-5774-8632-f9afe3af4ffd") + ) + (via + (at 160 128.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3fd22964-4fa5-5d72-916e-c64a094504c9") + ) + (via + (at 167.2 131.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0845cc3a-ff37-5a5f-b30e-c7e235176986") + ) + (via + (at 169.1 130) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2bed0cac-10cb-5dbc-ae90-ba69f764ef57") + ) + (via + (at 178.1 130) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "db9c126a-7510-506f-a71b-f6e2fffa1577") + ) + (via + (at 102 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3ce8492b-bdfe-5dfe-b245-1ba5f2f8fddd") + ) + (via + (at 106 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "440f411f-41f1-58f5-8c88-2217d909d171") + ) + (via + (at 110 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e2d7eff4-5bc2-52c9-bd99-bcf7f9846388") + ) + (via + (at 114 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6891194c-5e16-559a-b93e-8a70a35f998c") + ) + (via + (at 118 133.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4d80ee80-5b9c-5f23-b97a-3ea863fe7d42") + ) + (via + (at 121.9 133.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5af32b35-95b4-50c2-9714-2256f4d4fbc4") + ) + (via + (at 124.5 132.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7295c124-2063-511f-9e6d-69f28245e0f6") + ) + (via + (at 150 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9f36bb27-7ef1-5d76-a1d1-6fd69876ed2a") + ) + (via + (at 155.1 135) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1ef96584-8222-576b-8461-0b5aa592644e") + ) + (via + (at 158.1 134.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "aaf10a61-d1e1-5c95-9940-67400dbb10da") + ) + (via + (at 162.3 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7d7b2fec-926b-5882-aa59-54d2b40065b9") + ) + (via + (at 166 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f10e49d0-f3d0-53ee-8afd-9437d65ee050") + ) + (via + (at 170 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4abaffe7-1da4-5ab1-8f85-f47c3b7d5995") + ) + (via + (at 173.5 133.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9c43359c-d43a-53fd-a168-1a93747939b8") + ) + (via + (at 178 134) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1183cd8b-f1a8-5a35-b0d1-d0bf54d5e47b") + ) + (via + (at 102 138) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2a56abc9-73b8-5d68-afac-8cf41cbf8a37") + ) + (via + (at 106 138) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "14c40a33-539d-50fb-88e8-2816f370e29a") + ) + (via + (at 110 138) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3c505a65-4a81-5701-9232-e8a760652a55") + ) + (via + (at 114 138.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3a1f2aea-645c-5aba-848d-94e6e931a05f") + ) + (via + (at 117.7 138.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "77832afa-8113-5188-a1ff-5bc6909ee7a9") + ) + (via + (at 120.9 138.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "136b3e36-a4f4-5eaa-a08f-b620cb3e2917") + ) + (via + (at 125.9 138.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b135918f-416e-553f-8efb-662ae47559c6") + ) + (via + (at 129 139.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0a40b057-96a8-546c-844b-5abb9c4fb0d9") + ) + (via + (at 137.9 139.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "18d35541-cec8-5357-bcbd-13626d980277") + ) + (via + (at 141.7 139.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1700446c-7b18-596a-999e-1071d3c8f6f3") + ) + (via + (at 146 139.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "164b8f49-9ed7-59f2-837c-ba5a276b256b") + ) + (via + (at 150 138) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "ab612aad-88dc-55cc-ba68-d7f254eb74a5") + ) + (via + (at 154.1 138.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4b7e546b-449e-591d-b3d2-8788bba091d4") + ) + (via + (at 157.6 137.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "954ca01e-9d5d-5eb8-8149-345c67375621") + ) + (via + (at 163.1 137.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5b061bf7-3966-5f78-9755-a055b268d1d0") + ) + (via + (at 166 138) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "94b29846-3a8a-5f7d-9de5-9874cb2d123a") + ) + (via + (at 170 138) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d95ab12c-9381-5de7-9568-2782442ae91d") + ) + (via + (at 173.4 138.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9e6c1b34-6181-593e-bc41-4a81d92f647f") + ) + (via + (at 178 138) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "107f6a25-fb6f-5083-b96f-5cb54dc794ee") + ) + (via + (at 102 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3123e946-07e2-580e-a1ca-b1d0f070dd9b") + ) + (via + (at 106 142.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6f13b4a5-94cc-503d-a84f-3947b8d9d802") + ) + (via + (at 114 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9a0776cf-1c0d-5b0e-9492-d31837c3bd74") + ) + (via + (at 118 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "89a902e5-1fac-5fdd-a4b5-821a13ec0e1d") + ) + (via + (at 122 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d6757d2f-2f0c-524b-bd44-7f819edf4ef1") + ) + (via + (at 125.6 141.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "8786f280-0ee1-5338-aff0-f7508bf1640d") + ) + (via + (at 138 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a8dcfa72-3fec-50b9-ba19-a512d2595077") + ) + (via + (at 142 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c3d439fc-4ff7-54e3-ab1d-614dfcd6a5c5") + ) + (via + (at 146 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2dfd7efe-b535-5ab8-9b39-1e3a096fddc8") + ) + (via + (at 149.7 143.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d7943c45-3a76-5c6c-b34c-eb3c970089a6") + ) + (via + (at 155.2 143.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4027aa71-f0ac-56fd-95d4-0a8aaf1d3a3e") + ) + (via + (at 157.6 143.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d70d8b8b-9e04-55e3-8d2b-9896ddd16024") + ) + (via + (at 166.1 142.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "27b87bf6-29b3-5f82-921e-18318ec463e8") + ) + (via + (at 170.7 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "303e1313-ef24-511e-9bca-67f1dcc0903a") + ) + (via + (at 174 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "da5ce5b1-901c-598e-b598-08a15a3a4126") + ) + (via + (at 178 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a60a3031-9394-5c3c-a18e-c7146429de79") + ) + (via + (at 102 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7527572e-052b-56d7-8a34-da6137ff8c56") + ) + (via + (at 106 145.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "713c1815-e958-5b5e-8482-987efd2eb170") + ) + (via + (at 109.2 147.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "063b7512-f683-5743-bef0-7fb0a2d66630") + ) + (via + (at 113.9 145.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "11dd8a7b-1d4e-5679-944c-f1f5ca5b2df4") + ) + (via + (at 117.9 146.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f91cc824-3b7b-5d46-a7de-828b06104740") + ) + (via + (at 122 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "bce7173c-135f-5d4f-8c4e-937b77a42280") + ) + (via + (at 135.6 147.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "09e48768-ad72-5116-85a8-e526d5932716") + ) + (via + (at 138 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1c04d211-5ca3-5aad-b775-caf827b7e8d7") + ) + (via + (at 142 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "33621da2-fd7d-5971-8ec0-df9d4ca1c5e6") + ) + (via + (at 146 145.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f9f268da-0ee3-5953-b088-1893f9512337") + ) + (via + (at 149.7 146.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7d34f3a5-977e-5764-b41b-84bcccae1c12") + ) + (via + (at 154 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2a6bcac7-a6c5-5fa7-94c9-6aafa834ee78") + ) + (via + (at 166.2 145.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "12d78ad1-0412-5d97-b5f9-1ae6faedcbdd") + ) + (via + (at 170 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6840027e-76e6-5bf9-858f-298a1e42a24c") + ) + (via + (at 174 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "da6730e2-b3ae-52f0-aff5-73996439d77a") + ) + (via + (at 178 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "270d6c5f-6908-5bee-96ae-91c846405d6d") + ) + (via + (at 102 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6b77d314-ffeb-5c6a-8eb6-e1b85a24056f") + ) + (via + (at 106 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "584ac47b-6404-5e69-ba4e-48e362c6ef0e") + ) + (via + (at 108.6 150.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "35b9ad6b-f60e-5773-a6ce-7eaef0b7db81") + ) + (via + (at 114 151.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f9f12e05-15a6-5e7a-a803-187ddf0c5246") + ) + (via + (at 118 150.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "bbc9b96a-abad-5374-8bca-8981172e26a5") + ) + (via + (at 121.8 150.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "31e8a96d-39a7-5931-9918-417fe1a4a181") + ) + (via + (at 135.6 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c4792e70-79e5-543c-9b2b-f72965a0d00e") + ) + (via + (at 138 149.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "bac5b3a9-1c69-5545-bdad-897a0953eb3d") + ) + (via + (at 142 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e5467c9d-525d-57fe-a93c-73699aba3d25") + ) + (via + (at 146 150.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f6681909-70f1-55a0-b8bb-710a3c1f8a7b") + ) + (via + (at 150 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b4259b87-5af1-5e14-83f8-187ba5074af3") + ) + (via + (at 156.4 151.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3dbb7191-7e99-5d8b-a6d7-b58b330f3449") + ) + (via + (at 170.2 149.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3f4aee59-da2d-5223-8a0f-979d13aa0712") + ) + (via + (at 174 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c7bfb616-20a9-577e-bcd8-af3108bf2656") + ) + (via + (at 178 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "389c3572-6853-5449-b6ca-79f61210660f") + ) + (via + (at 102 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6f6848a3-e0bd-5237-8023-100fbf32ce43") + ) + (via + (at 106 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4640aa32-d632-5bb1-9923-f0f23fd72aa8") + ) + (via + (at 110 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1bb5cb3b-eb37-58ff-a78a-3aedc95162e8") + ) + (via + (at 113.3 153.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "213f9907-bf2f-568c-9314-20c2f46521e6") + ) + (via + (at 118 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "786acb9e-2ee9-5b4e-889f-b12969bba456") + ) + (via + (at 122.2 154.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b5345659-7247-5aef-9b73-7553322c2201") + ) + (via + (at 124.9 153.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d1d84a99-0921-5cc8-909a-b38ceb35e2aa") + ) + (via + (at 130.1 153.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c36f1199-57b0-5150-8ad6-8d408a463a38") + ) + (via + (at 132.9 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "64d3a6a8-32c9-55c6-9040-eadd09c79e54") + ) + (via + (at 138 155) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "15c5a72e-e565-5c1c-aa74-56aff3b2ea8c") + ) + (via + (at 142 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "44830ba7-c79c-5195-a413-f4c34e7006b9") + ) + (via + (at 146 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1af0fe2b-38ae-5314-b1a9-345b40db1fab") + ) + (via + (at 150 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a94b1954-91d5-521d-96ac-3b6cd3b7f186") + ) + (via + (at 158.6 154.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c377b955-1a47-57ea-85a6-67722c5b0aa1") + ) + (via + (at 162 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "db4b3535-486d-591f-9f04-1cd626687409") + ) + (via + (at 178.5 153.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "cb6a8d8e-2208-5453-bccd-5a46418931c7") + ) + (via + (at 102 158) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "76faa03d-feed-5d42-89c8-f735bf3f73b2") + ) + (via + (at 106 158) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "087948fb-a292-5412-8f62-1862e5ace273") + ) + (via + (at 110 158) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3989da11-0fb6-59f0-a46c-adc5d2c2afe1") + ) + (via + (at 114 158) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5997f30c-a286-5156-a057-347e8913f85d") + ) + (via + (at 118 158) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "127db668-fa76-5127-8d2e-436258542679") + ) + (via + (at 122 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "54b578fd-efef-5288-b2a5-eecd360423d2") + ) + (via + (at 126.3 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "20300c23-e9e5-5d68-a755-47e2076f18a9") + ) + (via + (at 130 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c7ae0a67-824b-5a8a-9458-be939259c6ba") + ) + (via + (at 133 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4298ed44-64be-5c4b-88af-c63816e3ea44") + ) + (via + (at 136.1 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "932059a6-d52d-5518-bd06-a80a91102bc9") + ) + (via + (at 142 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9d0eb3b2-7fae-5f5b-b8cb-5456ef8a9dd0") + ) + (via + (at 146 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f89bffb3-e711-5358-8c78-f5c24b85a363") + ) + (via + (at 150 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d5bcac01-e5a0-5203-8395-c930990991ee") + ) + (via + (at 162 156.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "303793df-e635-5b0c-9668-7d0122db5342") + ) + (via + (at 167.7 158) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f242130a-7d08-5188-a1b3-855efe0947bc") + ) + (via + (at 170.1 158) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1083031a-ef51-5b87-8957-636bbf07bb4d") + ) + (via + (at 174 158) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "8027fd0c-ab4a-5f43-886e-bd6f378fb49a") + ) + (via + (at 178.1 158.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b2ef0aa8-cc24-50a5-b045-ad05e7563cd2") + ) + (via + (at 102 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a30eaaa2-33fe-544c-8be9-fea428453a08") + ) + (via + (at 106 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a766aebe-5f14-5daa-8ddf-0cb0e2833aab") + ) + (via + (at 110 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "537ad5b7-e0f2-57b1-a9a6-22c4e9c2bd64") + ) + (via + (at 114 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "db9d02c6-2f47-5453-9c47-f8dde6709e92") + ) + (via + (at 118 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5ac0dd16-8506-56b0-8171-1fe5ed2d0514") + ) + (via + (at 167.7 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0ba1f821-e82d-585c-b207-254ea8052e07") + ) + (via + (at 170.1 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b3a25501-4b9a-5adc-afe0-4f2c153a0409") + ) + (via + (at 174 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "fce2d222-e29c-5433-b039-b379f22f047b") + ) + (via + (at 178 162) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "aaa631de-fde1-5908-9ebf-e52371fd0015") + ) + (via + (at 150.8 137.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f8f275f7-a690-50f4-985a-699ed4440727") + ) + (via + (at 136.8 140) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9fbb9842-bda5-59b2-b013-d8f1ae7d04d6") + ) + (via + (at 138 140.6) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "05fc6392-854f-5f87-b85b-76f6b0e9c2ff") + ) + (via + (at 140 140) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "069a5856-59a6-5149-9505-ea3a6d90b886") + ) + (via + (at 142.2 140.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "85817769-c139-5c92-a5ce-95c933de10fc") + ) + (via + (at 144 140) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d9105da9-600e-5965-a8db-d0eb3aebb3bc") + ) + (via + (at 146 140.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "80b96efc-ecd1-530c-8786-edcb0db0a36f") + ) + (via + (at 148 140) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "24c6998e-44cc-5357-ab53-38d3c2206494") + ) + (via + (at 149.9 140) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "e613e8a2-3f31-586f-87af-4a79ea2ee34d") + ) + (via + (at 154 140) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "ccfb1149-2710-507e-a35d-98c4761ff6d5") + ) + (via + (at 136.8 141.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "5bb7a5f6-9bc5-5cb4-b2f9-6d04a0d302ee") + ) + (via + (at 138.9 142.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "65329618-61fe-500b-9e52-bb2cd884aa13") + ) + (via + (at 140 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "11bff52a-7e09-5999-becb-65a0abde6e5a") + ) + (via + (at 141.1 141.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "71a5c85a-351e-53e2-8085-edd0d3994060") + ) + (via + (at 144 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "561bf10d-3032-560c-ade5-e2a63c65e415") + ) + (via + (at 145.1 142.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "48a3fc9a-5652-55cd-9aff-4818d7deb454") + ) + (via + (at 148 142) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "ac448a7e-d0bb-54bd-83e6-b5faaff6c5e0") + ) + (via + (at 149.6 142.4) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "ebbda78c-eafe-5686-ba60-00e95ce9d98e") + ) + (via + (at 154.5 142.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "3ac3c00d-9dcd-5946-8002-797bd6d9768f") + ) + (via + (at 136.8 144) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "aa2855ba-538c-5ac1-ada0-8644ef572201") + ) + (via + (at 138 143.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f791d494-d078-5e97-8c1a-0053802f18b2") + ) + (via + (at 140 144) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0d005c78-6eba-55cf-85fb-991e4e0dc487") + ) + (via + (at 142 144) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "705aed6f-1f9d-5683-927b-ca83a6d98174") + ) + (via + (at 144 144) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "db53501b-2237-5dbc-a19a-e5670e74cbff") + ) + (via + (at 146 144) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "fc58284b-7ea5-5990-b09f-02e4c58e18fe") + ) + (via + (at 148 144) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a12223e8-1867-540c-8066-ab0ee7ad9f7f") + ) + (via + (at 149.7 144.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a97854ca-1b7d-5fa5-bf38-25e50d6dd745") + ) + (via + (at 136.5 146.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "70b9ceb4-8dc5-54ab-a7a9-796690e885aa") + ) + (via + (at 138.8 145.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "4d2ae5e9-0cc7-55ba-be90-4c179e205cb0") + ) + (via + (at 140 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "394bc0dd-8c19-5a8a-a80a-81dc132ab28a") + ) + (via + (at 141.2 145.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "6117027d-3461-53d6-89d2-9a1c245ec855") + ) + (via + (at 144 145.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "76aaaa2b-ca98-5f7f-88b0-2a6a6b08068a") + ) + (via + (at 146.9 146.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "53b384b7-1ebe-5cd2-8721-e0f7573d7e07") + ) + (via + (at 148 146) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "005a7602-e393-5a9d-93ab-eb7e16687239") + ) + (via + (at 136.1 148.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "fb3bd7ab-dae9-5d31-99ff-7f11a3a4faa2") + ) + (via + (at 138 148) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "454c6e86-f618-5412-83a3-1ec393849434") + ) + (via + (at 140 148) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "03d0aae6-a36d-52d6-9065-ce96bc45408d") + ) + (via + (at 142 148) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "34225f0f-8442-5891-ad84-01be0adcd447") + ) + (via + (at 146.9 148) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0966a262-a0d2-50ce-b88b-3582207851ba") + ) + (via + (at 148.1 147.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9c6daf26-59fb-5eec-95c3-7d89318c982e") + ) + (via + (at 149.7 148) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "38199039-9139-5468-80c1-d8e89d4bbc3a") + ) + (via + (at 136.4 150.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a5a9f648-3f77-5ad2-97ab-40c7c4820338") + ) + (via + (at 138.3 150.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "f76d77f7-9c52-5a76-9af1-bace405fda50") + ) + (via + (at 140 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "c596c204-956c-5a93-810c-b8f5d31b493e") + ) + (via + (at 141.2 149.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "67bcc4fd-9f53-57d5-a7b3-3a09bf0012aa") + ) + (via + (at 144 150.5) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "71340efe-5cd4-54a8-872b-d74c824b5938") + ) + (via + (at 146.9 149.7) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9a7382f3-6978-57c9-a010-c35e2d372ccd") + ) + (via + (at 148.1 150) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "7e50761a-35f3-5509-a72b-0c88fd68a4d0") + ) + (via + (at 149.2 149.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "9cf78526-537f-5e84-8a77-4a2a847b51c1") + ) + (via + (at 135.9 152) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a2ae1715-5104-5545-906e-10fbc3b51316") + ) + (via + (at 137.3 151.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "dfb7779a-7881-5b5e-b68c-9fe911cb6f5b") + ) + (via + (at 140.3 152.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "d58c314f-28d9-52ec-b5ba-2f4f8d297672") + ) + (via + (at 142 152) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1af94598-645e-5618-af56-fa1297b63167") + ) + (via + (at 144 152) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "21608766-8908-5133-916a-c20c2b0c4511") + ) + (via + (at 146 152) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "af8a6acc-dd43-5525-89d9-0aadcf357d11") + ) + (via + (at 148 152) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "8543a713-7a82-5085-b24e-daf37ac0c8a0") + ) + (via + (at 150 152) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "ea4b3589-627b-576d-9e6d-1a128e3af14f") + ) + (via + (at 136 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "61d282dd-31cf-52d8-9ddb-91e0f27d8286") + ) + (via + (at 137.9 153.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "65fdbaa4-5925-580b-9cc1-5432ac17e143") + ) + (via + (at 140 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "a2aa62ab-50fa-5f64-9153-b5a9bc890200") + ) + (via + (at 141.1 154.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "94bd0c6f-2c73-5ac6-8939-e220719d6536") + ) + (via + (at 144 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "108d15f9-7d84-5131-abb1-27d97833acdc") + ) + (via + (at 145.1 154.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "fffbace8-93cb-5f6d-bb55-fa94c332222c") + ) + (via + (at 148 154) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "1f667e59-6cd5-5f48-b0b4-e0bb7e524ab0") + ) + (via + (at 149.1 154.8) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "56098dd4-dbb1-54ac-b342-470111e8b51a") + ) + (via + (at 136 155.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "b3ba8b9a-e5d8-539e-a00d-4aac37dfc5be") + ) + (via + (at 138 156.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "68b09dae-9b21-52c8-b375-0a15cea490ee") + ) + (via + (at 140 156) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "21bdd9c9-d240-51e2-bf13-36c8f5f5ce0c") + ) + (via + (at 142.2 155.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "0bd49c4a-3118-5b9e-928a-efb1e2a913f0") + ) + (via + (at 144 156) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "704eec43-7985-59a0-bbff-ca6a02c9cec4") + ) + (via + (at 146.2 155.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "715f624b-f8ba-5b10-bbfb-be8356af47d0") + ) + (via + (at 148 156) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "69e87050-73c1-5184-892d-62f84a95846b") + ) + (via + (at 150.2 155.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "01f9c29d-6ab6-5d2f-9892-652f9093330e") + ) + (via + (at 153.9 156.2) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net 1) + (uuid "2aa2971c-0514-5548-9fbf-eb02fc914e52") + ) + (zone + (net 0) + (net_name "") + (layers "F.Cu" "B.Cu") + (uuid "a10a04f8-4cd2-56bc-a687-e3e020266820") + (name "ANTENNA") + (hatch edge 0.5) + (connect_pads + (clearance 0) + ) + (min_thickness 0.25) + (filled_areas_thickness no) + (keepout + (tracks not_allowed) + (vias not_allowed) + (pads not_allowed) + (copperpour not_allowed) + (footprints allowed) + ) + (placement + (enabled no) + (sheetname "") + ) + (fill + (thermal_gap 0.5) + (thermal_bridge_width 0.5) + ) + (polygon + (pts + (xy 118.75 156.9) + (xy 167.25 156.9) + (xy 167.25 163.34) + (xy 118.75 163.34) + ) + ) + ) + (zone + (net 1) + (net_name "/GND") + (layer "B.Cu") + (uuid "45fb0992-ee97-55bf-9050-21d83388e43c") + (name "GND_B") + (hatch edge 0.5) + (connect_pads yes + (clearance 0.3) + ) + (min_thickness 0.25) + (filled_areas_thickness no) + (fill yes + (thermal_gap 0.5) + (thermal_bridge_width 0.5) + ) + (polygon + (pts + (xy 100.25 100.25) + (xy 179.75 100.25) + (xy 179.75 163.09) + (xy 100.25 163.09) + ) + ) + (filled_polygon + (layer "B.Cu") + (pts + (xy 100.75 100.55) + (xy 100.75 100.65) + (xy 100.65 100.65) + (xy 100.65 100.75) + (xy 100.55 100.75) + (xy 100.55 162.55) + (xy 100.65 162.55) + (xy 100.65 162.65) + (xy 100.75 162.65) + (xy 100.75 162.75) + (xy 118.35 162.75) + (xy 118.35 162.65) + (xy 118.45 162.65) + (xy 118.45 162.55) + (xy 118.55 162.55) + (xy 118.55 156.65) + (xy 167.45 156.65) + (xy 167.45 162.55) + (xy 167.55 162.55) + (xy 167.55 162.65) + (xy 167.65 162.65) + (xy 167.65 162.75) + (xy 179.25 162.75) + (xy 179.25 162.65) + (xy 179.35 162.65) + (xy 179.35 162.55) + (xy 179.45 162.55) + (xy 179.45 151.05) + (xy 178.75 151.05) + (xy 178.75 152.95) + (xy 178.65 152.95) + (xy 178.65 153.15) + (xy 178.45 153.15) + (xy 178.45 153.25) + (xy 178.35 153.25) + (xy 178.35 153.35) + (xy 178.25 153.35) + (xy 178.25 153.45) + (xy 178.15 153.45) + (xy 178.15 153.55) + (xy 178.25 153.55) + (xy 178.25 153.65) + (xy 178.35 153.65) + (xy 178.35 153.75) + (xy 178.45 153.75) + (xy 178.45 153.85) + (xy 178.55 153.85) + (xy 178.55 153.95) + (xy 178.65 153.95) + (xy 178.65 154.25) + (xy 178.75 154.25) + (xy 178.75 154.85) + (xy 178.65 154.85) + (xy 178.65 155.05) + (xy 178.55 155.05) + (xy 178.55 155.25) + (xy 178.45 155.25) + (xy 178.45 155.35) + (xy 178.35 155.35) + (xy 178.35 155.45) + (xy 178.25 155.45) + (xy 178.25 155.55) + (xy 178.15 155.55) + (xy 178.15 155.65) + (xy 178.05 155.65) + (xy 178.05 155.75) + (xy 177.95 155.75) + (xy 177.95 155.85) + (xy 178.05 155.85) + (xy 178.05 155.95) + (xy 178.15 155.95) + (xy 178.15 156.05) + (xy 178.25 156.05) + (xy 178.25 156.15) + (xy 178.35 156.15) + (xy 178.35 156.25) + (xy 178.45 156.25) + (xy 178.45 156.35) + (xy 178.55 156.35) + (xy 178.55 156.55) + (xy 178.65 156.55) + (xy 178.65 156.85) + (xy 178.75 156.85) + (xy 178.75 157.35) + (xy 178.65 157.35) + (xy 178.65 157.65) + (xy 178.55 157.65) + (xy 178.55 157.75) + (xy 178.45 157.75) + (xy 178.45 157.95) + (xy 178.35 157.95) + (xy 178.35 158.05) + (xy 178.15 158.05) + (xy 178.15 158.15) + (xy 178.05 158.15) + (xy 178.05 158.25) + (xy 177.65 158.25) + (xy 177.65 158.35) + (xy 177.35 158.35) + (xy 177.35 158.25) + (xy 176.95 158.25) + (xy 176.95 158.15) + (xy 176.85 158.15) + (xy 176.85 158.05) + (xy 176.65 158.05) + (xy 176.65 157.95) + (xy 176.55 157.95) + (xy 176.55 157.75) + (xy 176.45 157.75) + (xy 176.45 157.65) + (xy 176.35 157.65) + (xy 176.35 157.35) + (xy 176.25 157.35) + (xy 176.25 156.85) + (xy 176.35 156.85) + (xy 176.35 156.55) + (xy 176.45 156.55) + (xy 176.45 156.35) + (xy 176.55 156.35) + (xy 176.55 156.25) + (xy 176.65 156.25) + (xy 176.65 156.15) + (xy 176.75 156.15) + (xy 176.75 156.05) + (xy 176.85 156.05) + (xy 176.85 155.95) + (xy 176.95 155.95) + (xy 176.95 155.85) + (xy 177.05 155.85) + (xy 177.05 155.75) + (xy 176.95 155.75) + (xy 176.95 155.65) + (xy 176.85 155.65) + (xy 176.85 155.55) + (xy 176.75 155.55) + (xy 176.75 155.45) + (xy 176.65 155.45) + (xy 176.65 155.35) + (xy 176.55 155.35) + (xy 115.95 155.35) + (xy 115.95 156.25) + (xy 115.85 156.25) + (xy 115.85 156.55) + (xy 115.75 156.55) + (xy 115.75 156.75) + (xy 115.65 156.75) + (xy 115.65 156.95) + (xy 115.55 156.95) + (xy 115.55 157.05) + (xy 115.45 157.05) + (xy 115.45 157.15) + (xy 115.35 157.15) + (xy 115.35 157.25) + (xy 115.25 157.25) + (xy 115.25 157.35) + (xy 115.15 157.35) + (xy 115.15 157.45) + (xy 114.95 157.45) + (xy 114.95 157.55) + (xy 114.75 157.55) + (xy 114.75 157.65) + (xy 114.55 157.65) + (xy 114.55 157.75) + (xy 113.45 157.75) + (xy 113.45 157.65) + (xy 113.15 157.65) + (xy 113.15 157.55) + (xy 112.95 157.55) + (xy 112.95 157.45) + (xy 112.85 157.45) + (xy 112.85 157.35) + (xy 112.65 157.35) + (xy 112.65 157.25) + (xy 112.55 157.25) + (xy 112.55 157.15) + (xy 112.45 157.15) + (xy 112.45 157.05) + (xy 112.35 157.05) + (xy 112.35 156.85) + (xy 112.25 156.85) + (xy 112.25 156.65) + (xy 112.15 156.65) + (xy 112.15 156.45) + (xy 112.05 156.45) + (xy 112.05 155.95) + (xy 111.95 155.95) + (xy 111.95 155.65) + (xy 112.05 155.65) + (xy 112.05 155.15) + (xy 112.15 155.15) + (xy 112.15 154.95) + (xy 112.25 154.95) + (xy 112.25 154.75) + (xy 112.35 154.75) + (xy 112.35 154.55) + (xy 112.45 154.55) + (xy 112.45 154.45) + (xy 112.55 154.45) + (xy 112.55 154.35) + (xy 112.65 154.35) + (xy 112.65 154.25) + (xy 112.85 154.25) + (xy 112.85 154.15) + (xy 112.95 154.15) + (xy 112.95 154.05) + (xy 113.15 154.05) + (xy 113.15 153.95) + (xy 113.45 153.95) + (xy 113.45 153.85) + (xy 114.55 153.85) + (xy 114.55 153.95) + (xy 114.75 153.95) + (xy 114.75 154.05) + (xy 114.95 154.05) + (xy 114.95 154.15) + (xy 115.15 154.15) + (xy 115.15 154.25) + (xy 115.25 154.25) + (xy 115.25 154.35) + (xy 115.35 154.35) + (xy 115.35 154.45) + (xy 115.45 154.45) + (xy 115.45 154.55) + (xy 115.55 154.55) + (xy 115.55 154.65) + (xy 115.65 154.65) + (xy 115.65 154.85) + (xy 115.75 154.85) + (xy 115.75 155.05) + (xy 115.85 155.05) + (xy 115.85 155.35) + (xy 115.95 155.35) + (xy 176.55 155.35) + (xy 176.55 155.25) + (xy 176.45 155.25) + (xy 176.45 155.05) + (xy 176.35 155.05) + (xy 176.35 154.85) + (xy 176.25 154.85) + (xy 176.25 154.25) + (xy 176.35 154.25) + (xy 176.35 153.95) + (xy 176.45 153.95) + (xy 176.45 153.85) + (xy 176.55 153.85) + (xy 176.55 153.75) + (xy 176.65 153.75) + (xy 176.65 153.65) + (xy 176.75 153.65) + (xy 176.75 153.55) + (xy 176.85 153.55) + (xy 176.85 153.45) + (xy 176.75 153.45) + (xy 176.75 153.35) + (xy 176.65 153.35) + (xy 176.65 153.25) + (xy 176.55 153.25) + (xy 176.55 153.15) + (xy 176.35 153.15) + (xy 176.35 152.95) + (xy 176.25 152.95) + (xy 176.25 151.05) + (xy 176.35 151.05) + (xy 176.35 150.85) + (xy 176.55 150.85) + (xy 176.55 150.75) + (xy 178.45 150.75) + (xy 178.45 150.85) + (xy 178.65 150.85) + (xy 178.65 151.05) + (xy 178.75 151.05) + (xy 179.45 151.05) + (xy 179.45 150.45) + (xy 168.05 150.45) + (xy 168.05 151.05) + (xy 167.95 151.05) + (xy 167.95 151.35) + (xy 167.85 151.35) + (xy 167.85 151.65) + (xy 167.75 151.65) + (xy 167.75 151.75) + (xy 167.65 151.75) + (xy 167.65 151.95) + (xy 167.55 151.95) + (xy 167.55 152.05) + (xy 167.45 152.05) + (xy 167.45 152.15) + (xy 167.35 152.15) + (xy 167.35 152.25) + (xy 167.25 152.25) + (xy 167.25 152.35) + (xy 167.05 152.35) + (xy 167.05 152.45) + (xy 166.95 152.45) + (xy 166.95 152.55) + (xy 166.65 152.55) + (xy 166.65 152.65) + (xy 165.45 152.65) + (xy 165.45 152.55) + (xy 165.15 152.55) + (xy 165.15 152.45) + (xy 164.95 152.45) + (xy 164.95 152.35) + (xy 164.85 152.35) + (xy 164.85 152.25) + (xy 164.75 152.25) + (xy 164.75 152.15) + (xy 164.65 152.15) + (xy 164.65 152.05) + (xy 164.55 152.05) + (xy 164.55 151.95) + (xy 164.45 151.95) + (xy 164.45 151.85) + (xy 164.35 151.85) + (xy 164.35 151.65) + (xy 164.25 151.65) + (xy 164.25 151.45) + (xy 164.15 151.45) + (xy 164.15 151.15) + (xy 164.05 151.15) + (xy 164.05 150.35) + (xy 164.15 150.35) + (xy 164.15 149.95) + (xy 164.25 149.95) + (xy 164.25 149.75) + (xy 164.35 149.75) + (xy 164.35 149.65) + (xy 164.45 149.65) + (xy 164.45 149.45) + (xy 164.55 149.45) + (xy 164.55 149.35) + (xy 164.65 149.35) + (xy 164.65 149.25) + (xy 164.75 149.25) + (xy 164.75 149.15) + (xy 164.95 149.15) + (xy 164.95 149.05) + (xy 165.05 149.05) + (xy 165.05 148.95) + (xy 165.25 148.95) + (xy 165.25 148.85) + (xy 165.55 148.85) + (xy 165.55 148.75) + (xy 166.55 148.75) + (xy 166.55 148.85) + (xy 166.85 148.85) + (xy 166.85 148.95) + (xy 167.05 148.95) + (xy 167.05 149.05) + (xy 167.15 149.05) + (xy 167.15 149.15) + (xy 167.35 149.15) + (xy 167.35 149.25) + (xy 167.45 149.25) + (xy 167.45 149.35) + (xy 167.55 149.35) + (xy 167.55 149.55) + (xy 167.65 149.55) + (xy 167.65 149.65) + (xy 167.75 149.65) + (xy 167.75 149.85) + (xy 167.85 149.85) + (xy 167.85 150.05) + (xy 167.95 150.05) + (xy 167.95 150.45) + (xy 168.05 150.45) + (xy 179.45 150.45) + (xy 179.45 139.65) + (xy 177.85 139.65) + (xy 177.85 141.75) + (xy 177.75 141.75) + (xy 177.75 141.85) + (xy 177.65 141.85) + (xy 177.65 141.95) + (xy 177.55 141.95) + (xy 177.55 142.05) + (xy 177.45 142.05) + (xy 177.45 142.15) + (xy 177.35 142.15) + (xy 177.35 142.25) + (xy 177.45 142.25) + (xy 177.45 142.35) + (xy 177.55 142.35) + (xy 177.55 142.45) + (xy 177.65 142.45) + (xy 177.65 142.65) + (xy 177.75 142.65) + (xy 177.75 142.85) + (xy 177.85 142.85) + (xy 177.85 143.55) + (xy 177.75 143.55) + (xy 177.75 143.75) + (xy 177.65 143.75) + (xy 177.65 143.95) + (xy 177.55 143.95) + (xy 177.55 144.05) + (xy 177.45 144.05) + (xy 177.45 144.15) + (xy 177.35 144.15) + (xy 177.35 144.25) + (xy 177.15 144.25) + (xy 177.15 144.35) + (xy 176.85 144.35) + (xy 176.85 144.45) + (xy 176.15 144.45) + (xy 176.15 144.35) + (xy 175.85 144.35) + (xy 161.95 144.35) + (xy 161.95 145.05) + (xy 161.85 145.05) + (xy 161.85 145.15) + (xy 161.75 145.15) + (xy 161.75 145.25) + (xy 161.65 145.25) + (xy 161.65 145.35) + (xy 160.95 145.35) + (xy 160.95 145.25) + (xy 160.85 145.25) + (xy 160.85 145.15) + (xy 160.75 145.15) + (xy 160.75 145.05) + (xy 160.65 145.05) + (xy 160.65 144.85) + (xy 160.55 144.85) + (xy 160.55 144.75) + (xy 160.45 144.75) + (xy 160.45 144.65) + (xy 160.35 144.65) + (xy 160.35 144.55) + (xy 160.25 144.55) + (xy 160.25 144.45) + (xy 160.15 144.45) + (xy 160.15 144.35) + (xy 160.05 144.35) + (xy 160.05 144.25) + (xy 159.95 144.25) + (xy 159.95 144.15) + (xy 159.85 144.15) + (xy 159.85 144.05) + (xy 159.75 144.05) + (xy 159.75 143.95) + (xy 159.65 143.95) + (xy 159.65 143.75) + (xy 159.55 143.75) + (xy 159.55 142.25) + (xy 159.45 142.25) + (xy 159.45 141.55) + (xy 159.55 141.55) + (xy 159.55 141.45) + (xy 159.65 141.45) + (xy 159.65 141.35) + (xy 159.75 141.35) + (xy 159.75 141.25) + (xy 160.45 141.25) + (xy 160.45 141.35) + (xy 160.55 141.35) + (xy 160.55 141.45) + (xy 160.65 141.45) + (xy 160.65 141.55) + (xy 160.75 141.55) + (xy 160.75 142.25) + (xy 160.65 142.25) + (xy 160.65 143.25) + (xy 160.75 143.25) + (xy 160.75 143.35) + (xy 160.85 143.35) + (xy 160.85 143.45) + (xy 160.95 143.45) + (xy 160.95 143.55) + (xy 161.05 143.55) + (xy 161.05 143.65) + (xy 161.15 143.65) + (xy 161.15 143.75) + (xy 161.25 143.75) + (xy 161.25 143.85) + (xy 161.35 143.85) + (xy 161.35 143.95) + (xy 161.45 143.95) + (xy 161.45 144.05) + (xy 161.65 144.05) + (xy 161.65 144.15) + (xy 161.75 144.15) + (xy 161.75 144.25) + (xy 161.85 144.25) + (xy 161.85 144.35) + (xy 161.95 144.35) + (xy 175.85 144.35) + (xy 175.85 144.25) + (xy 175.65 144.25) + (xy 175.65 144.15) + (xy 175.55 144.15) + (xy 175.55 144.05) + (xy 175.45 144.05) + (xy 175.45 143.95) + (xy 175.35 143.95) + (xy 175.35 143.75) + (xy 175.25 143.75) + (xy 175.25 143.55) + (xy 175.15 143.55) + (xy 175.15 142.85) + (xy 175.25 142.85) + (xy 175.25 142.65) + (xy 175.35 142.65) + (xy 175.35 142.45) + (xy 175.45 142.45) + (xy 175.45 142.35) + (xy 175.55 142.35) + (xy 175.55 142.25) + (xy 175.65 142.25) + (xy 175.65 142.15) + (xy 175.55 142.15) + (xy 175.55 142.05) + (xy 175.45 142.05) + (xy 175.45 141.95) + (xy 175.35 141.95) + (xy 175.35 141.85) + (xy 175.25 141.85) + (xy 175.25 141.75) + (xy 175.15 141.75) + (xy 175.15 139.65) + (xy 175.25 139.65) + (xy 175.25 139.55) + (xy 175.35 139.55) + (xy 175.35 139.45) + (xy 177.65 139.45) + (xy 177.65 139.55) + (xy 177.75 139.55) + (xy 177.75 139.65) + (xy 177.85 139.65) + (xy 179.45 139.65) + (xy 179.45 128.55) + (xy 177.85 128.55) + (xy 177.85 130.65) + (xy 177.75 130.65) + (xy 177.75 130.75) + (xy 177.65 130.75) + (xy 177.65 130.85) + (xy 177.55 130.85) + (xy 177.55 130.95) + (xy 177.45 130.95) + (xy 177.45 131.05) + (xy 177.35 131.05) + (xy 177.35 131.15) + (xy 177.45 131.15) + (xy 177.45 131.25) + (xy 177.55 131.25) + (xy 177.55 131.35) + (xy 177.65 131.35) + (xy 177.65 131.55) + (xy 177.75 131.55) + (xy 177.75 131.75) + (xy 177.85 131.75) + (xy 177.85 132.45) + (xy 177.75 132.45) + (xy 177.75 132.65) + (xy 177.65 132.65) + (xy 177.65 132.85) + (xy 177.55 132.85) + (xy 177.55 132.95) + (xy 177.45 132.95) + (xy 177.45 133.05) + (xy 177.35 133.05) + (xy 177.35 133.15) + (xy 177.15 133.15) + (xy 177.15 133.25) + (xy 176.85 133.25) + (xy 176.85 133.35) + (xy 176.15 133.35) + (xy 176.15 133.25) + (xy 175.85 133.25) + (xy 175.85 133.15) + (xy 175.65 133.15) + (xy 175.65 133.05) + (xy 175.55 133.05) + (xy 175.55 132.95) + (xy 175.45 132.95) + (xy 175.45 132.85) + (xy 175.35 132.85) + (xy 175.35 132.65) + (xy 175.25 132.65) + (xy 175.25 132.45) + (xy 175.15 132.45) + (xy 175.15 131.75) + (xy 175.25 131.75) + (xy 175.25 131.55) + (xy 175.15 131.55) + (xy 175.15 131.45) + (xy 175.05 131.45) + (xy 175.05 131.35) + (xy 174.95 131.35) + (xy 174.95 131.25) + (xy 174.85 131.25) + (xy 174.85 131.15) + (xy 174.75 131.15) + (xy 174.75 131.05) + (xy 174.65 131.05) + (xy 174.65 130.95) + (xy 174.55 130.95) + (xy 174.55 130.85) + (xy 174.45 130.85) + (xy 174.45 130.75) + (xy 174.35 130.75) + (xy 174.35 130.65) + (xy 174.25 130.65) + (xy 174.25 130.55) + (xy 174.15 130.55) + (xy 174.15 130.45) + (xy 174.05 130.45) + (xy 174.05 130.35) + (xy 173.95 130.35) + (xy 173.95 130.25) + (xy 173.85 130.25) + (xy 173.85 130.15) + (xy 173.75 130.15) + (xy 173.75 130.05) + (xy 173.65 130.05) + (xy 173.65 129.95) + (xy 173.55 129.95) + (xy 173.55 129.85) + (xy 173.45 129.85) + (xy 173.45 129.75) + (xy 173.35 129.75) + (xy 173.35 129.65) + (xy 173.25 129.65) + (xy 173.25 129.55) + (xy 173.15 129.55) + (xy 173.15 129.45) + (xy 173.05 129.45) + (xy 173.05 129.35) + (xy 172.95 129.35) + (xy 172.95 129.25) + (xy 172.85 129.25) + (xy 172.85 129.15) + (xy 172.75 129.15) + (xy 172.75 129.05) + (xy 172.65 129.05) + (xy 172.65 128.95) + (xy 172.55 128.95) + (xy 172.55 128.85) + (xy 172.45 128.85) + (xy 172.45 128.75) + (xy 172.35 128.75) + (xy 172.35 128.65) + (xy 172.25 128.65) + (xy 172.25 128.55) + (xy 172.15 128.55) + (xy 172.15 128.45) + (xy 172.05 128.45) + (xy 172.05 128.35) + (xy 171.95 128.35) + (xy 171.95 128.25) + (xy 171.85 128.25) + (xy 171.85 128.15) + (xy 171.75 128.15) + (xy 171.75 128.05) + (xy 171.65 128.05) + (xy 171.65 127.95) + (xy 171.55 127.95) + (xy 171.55 127.85) + (xy 171.15 127.85) + (xy 171.15 127.75) + (xy 171.05 127.75) + (xy 171.05 127.65) + (xy 170.95 127.65) + (xy 170.95 127.55) + (xy 170.85 127.55) + (xy 170.85 126.85) + (xy 170.95 126.85) + (xy 170.95 126.75) + (xy 171.05 126.75) + (xy 171.05 126.65) + (xy 171.15 126.65) + (xy 171.15 126.55) + (xy 171.85 126.55) + (xy 171.85 126.65) + (xy 171.95 126.65) + (xy 171.95 126.75) + (xy 172.05 126.75) + (xy 172.05 126.85) + (xy 172.15 126.85) + (xy 172.15 127.25) + (xy 172.25 127.25) + (xy 172.25 127.35) + (xy 172.35 127.35) + (xy 172.35 127.45) + (xy 172.45 127.45) + (xy 172.45 127.55) + (xy 172.55 127.55) + (xy 172.55 127.65) + (xy 172.65 127.65) + (xy 172.65 127.75) + (xy 172.75 127.75) + (xy 172.75 127.85) + (xy 172.85 127.85) + (xy 172.85 127.95) + (xy 172.95 127.95) + (xy 172.95 128.05) + (xy 173.05 128.05) + (xy 173.05 128.15) + (xy 173.15 128.15) + (xy 173.15 128.25) + (xy 173.25 128.25) + (xy 173.25 128.35) + (xy 173.35 128.35) + (xy 173.35 128.45) + (xy 173.45 128.45) + (xy 173.45 128.55) + (xy 173.55 128.55) + (xy 173.55 128.65) + (xy 173.65 128.65) + (xy 173.65 128.75) + (xy 173.75 128.75) + (xy 173.75 128.85) + (xy 173.85 128.85) + (xy 173.85 128.95) + (xy 173.95 128.95) + (xy 173.95 129.05) + (xy 174.05 129.05) + (xy 174.05 129.15) + (xy 174.15 129.15) + (xy 174.15 129.25) + (xy 174.25 129.25) + (xy 174.25 129.35) + (xy 174.35 129.35) + (xy 174.35 129.45) + (xy 174.45 129.45) + (xy 174.45 129.55) + (xy 174.55 129.55) + (xy 174.55 129.65) + (xy 174.65 129.65) + (xy 174.65 129.75) + (xy 174.75 129.75) + (xy 174.75 129.85) + (xy 174.85 129.85) + (xy 174.85 129.95) + (xy 174.95 129.95) + (xy 174.95 129.85) + (xy 175.05 129.85) + (xy 175.05 129.75) + (xy 175.15 129.75) + (xy 175.15 128.55) + (xy 175.25 128.55) + (xy 175.25 128.45) + (xy 175.35 128.45) + (xy 175.35 128.35) + (xy 177.65 128.35) + (xy 177.65 128.45) + (xy 177.75 128.45) + (xy 177.75 128.55) + (xy 177.85 128.55) + (xy 179.45 128.55) + (xy 179.45 122.45) + (xy 168.05 122.45) + (xy 168.05 123.05) + (xy 167.95 123.05) + (xy 167.95 123.45) + (xy 167.85 123.45) + (xy 167.85 123.65) + (xy 167.75 123.65) + (xy 167.75 123.85) + (xy 167.65 123.85) + (xy 167.65 123.95) + (xy 167.55 123.95) + (xy 167.55 124.15) + (xy 167.45 124.15) + (xy 167.45 124.25) + (xy 167.35 124.25) + (xy 167.35 124.35) + (xy 167.15 124.35) + (xy 167.15 124.45) + (xy 167.05 124.45) + (xy 167.05 124.55) + (xy 166.85 124.55) + (xy 166.85 124.65) + (xy 166.55 124.65) + (xy 166.55 124.75) + (xy 165.55 124.75) + (xy 165.55 124.65) + (xy 165.25 124.65) + (xy 165.25 124.55) + (xy 165.05 124.55) + (xy 165.05 124.45) + (xy 164.95 124.45) + (xy 164.95 124.35) + (xy 164.75 124.35) + (xy 164.75 124.25) + (xy 164.65 124.25) + (xy 164.65 124.15) + (xy 164.55 124.15) + (xy 164.55 124.05) + (xy 164.45 124.05) + (xy 164.45 123.85) + (xy 164.35 123.85) + (xy 164.35 123.75) + (xy 164.25 123.75) + (xy 164.25 123.55) + (xy 164.15 123.55) + (xy 164.15 123.15) + (xy 164.05 123.15) + (xy 164.05 122.35) + (xy 164.15 122.35) + (xy 164.15 122.05) + (xy 164.25 122.05) + (xy 164.25 121.85) + (xy 164.35 121.85) + (xy 164.35 121.65) + (xy 164.45 121.65) + (xy 164.45 121.55) + (xy 164.55 121.55) + (xy 164.55 121.45) + (xy 164.65 121.45) + (xy 164.65 121.35) + (xy 164.75 121.35) + (xy 164.75 121.25) + (xy 164.85 121.25) + (xy 164.85 121.15) + (xy 164.95 121.15) + (xy 164.95 121.05) + (xy 165.15 121.05) + (xy 165.15 120.95) + (xy 165.45 120.95) + (xy 165.45 120.85) + (xy 166.65 120.85) + (xy 166.65 120.95) + (xy 166.95 120.95) + (xy 166.95 121.05) + (xy 167.05 121.05) + (xy 167.05 121.15) + (xy 167.25 121.15) + (xy 167.25 121.25) + (xy 167.35 121.25) + (xy 167.35 121.35) + (xy 167.45 121.35) + (xy 167.45 121.45) + (xy 167.55 121.45) + (xy 167.55 121.55) + (xy 167.65 121.55) + (xy 167.65 121.75) + (xy 167.75 121.75) + (xy 167.75 121.85) + (xy 167.85 121.85) + (xy 167.85 122.15) + (xy 167.95 122.15) + (xy 167.95 122.45) + (xy 168.05 122.45) + (xy 179.45 122.45) + (xy 179.45 117.45) + (xy 177.85 117.45) + (xy 177.85 119.55) + (xy 177.75 119.55) + (xy 177.75 119.65) + (xy 177.65 119.65) + (xy 177.65 119.75) + (xy 177.55 119.75) + (xy 177.55 119.85) + (xy 177.45 119.85) + (xy 177.45 119.95) + (xy 177.35 119.95) + (xy 177.35 120.05) + (xy 177.45 120.05) + (xy 177.45 120.15) + (xy 177.55 120.15) + (xy 177.55 120.25) + (xy 177.65 120.25) + (xy 177.65 120.45) + (xy 177.75 120.45) + (xy 177.75 120.65) + (xy 177.85 120.65) + (xy 177.85 121.35) + (xy 177.75 121.35) + (xy 177.75 121.55) + (xy 177.65 121.55) + (xy 177.65 121.75) + (xy 177.55 121.75) + (xy 177.55 121.85) + (xy 177.45 121.85) + (xy 177.45 121.95) + (xy 177.35 121.95) + (xy 177.35 122.05) + (xy 177.15 122.05) + (xy 177.15 122.15) + (xy 176.85 122.15) + (xy 176.85 122.25) + (xy 176.15 122.25) + (xy 176.15 122.15) + (xy 175.85 122.15) + (xy 175.85 122.05) + (xy 175.65 122.05) + (xy 175.65 121.95) + (xy 175.55 121.95) + (xy 175.55 121.85) + (xy 175.45 121.85) + (xy 175.45 121.75) + (xy 175.35 121.75) + (xy 175.35 121.55) + (xy 175.25 121.55) + (xy 175.25 121.35) + (xy 175.15 121.35) + (xy 175.15 120.65) + (xy 175.25 120.65) + (xy 175.25 120.45) + (xy 175.35 120.45) + (xy 175.35 120.25) + (xy 175.45 120.25) + (xy 175.45 120.15) + (xy 175.55 120.15) + (xy 175.55 120.05) + (xy 175.65 120.05) + (xy 175.65 119.95) + (xy 175.55 119.95) + (xy 175.55 119.85) + (xy 175.45 119.85) + (xy 175.45 119.75) + (xy 175.35 119.75) + (xy 175.35 119.65) + (xy 175.25 119.65) + (xy 175.25 119.55) + (xy 175.15 119.55) + (xy 175.15 117.65) + (xy 165.35 117.65) + (xy 165.35 118.35) + (xy 165.25 118.35) + (xy 165.25 118.45) + (xy 165.15 118.45) + (xy 165.15 118.55) + (xy 165.05 118.55) + (xy 165.05 118.65) + (xy 164.35 118.65) + (xy 164.35 118.55) + (xy 164.25 118.55) + (xy 164.25 118.45) + (xy 162.55 118.45) + (xy 162.55 118.55) + (xy 162.45 118.55) + (xy 162.45 118.65) + (xy 162.35 118.65) + (xy 162.35 118.75) + (xy 162.25 118.75) + (xy 162.25 118.85) + (xy 162.15 118.85) + (xy 162.15 118.95) + (xy 162.05 118.95) + (xy 162.05 119.05) + (xy 161.95 119.05) + (xy 161.95 119.15) + (xy 161.85 119.15) + (xy 161.85 119.25) + (xy 161.75 119.25) + (xy 161.75 119.35) + (xy 161.65 119.35) + (xy 161.65 119.45) + (xy 161.55 119.45) + (xy 161.55 119.85) + (xy 161.45 119.85) + (xy 161.45 119.95) + (xy 161.35 119.95) + (xy 161.35 123.85) + (xy 161.45 123.85) + (xy 161.45 123.95) + (xy 161.55 123.95) + (xy 161.55 124.05) + (xy 161.95 124.05) + (xy 161.95 124.15) + (xy 162.05 124.15) + (xy 162.05 124.25) + (xy 162.15 124.25) + (xy 162.15 124.35) + (xy 162.25 124.35) + (xy 162.25 125.05) + (xy 162.15 125.05) + (xy 162.15 125.15) + (xy 162.05 125.15) + (xy 162.05 134.65) + (xy 161.95 134.65) + (xy 161.95 134.75) + (xy 161.85 134.75) + (xy 161.85 134.85) + (xy 161.75 134.85) + (xy 161.75 134.95) + (xy 161.65 134.95) + (xy 161.65 135.05) + (xy 161.55 135.05) + (xy 161.55 135.15) + (xy 161.45 135.15) + (xy 161.45 135.25) + (xy 161.35 135.25) + (xy 161.35 135.35) + (xy 161.25 135.35) + (xy 161.25 135.45) + (xy 161.15 135.45) + (xy 161.15 135.55) + (xy 161.05 135.55) + (xy 161.05 135.65) + (xy 161.15 135.65) + (xy 161.15 135.75) + (xy 161.25 135.75) + (xy 161.25 135.85) + (xy 161.85 135.85) + (xy 161.85 135.95) + (xy 161.95 135.95) + (xy 161.95 136.05) + (xy 162.05 136.05) + (xy 162.05 136.15) + (xy 162.15 136.15) + (xy 162.15 136.85) + (xy 162.05 136.85) + (xy 162.05 136.95) + (xy 161.95 136.95) + (xy 161.95 137.05) + (xy 161.85 137.05) + (xy 161.85 137.15) + (xy 161.45 137.15) + (xy 161.45 137.25) + (xy 161.35 137.25) + (xy 161.35 137.35) + (xy 161.25 137.35) + (xy 161.25 137.45) + (xy 161.15 137.45) + (xy 161.15 137.55) + (xy 161.05 137.55) + (xy 161.05 137.65) + (xy 160.95 137.65) + (xy 160.95 137.75) + (xy 160.85 137.75) + (xy 160.85 137.85) + (xy 160.75 137.85) + (xy 160.75 137.95) + (xy 160.65 137.95) + (xy 160.65 138.05) + (xy 160.55 138.05) + (xy 160.55 138.15) + (xy 160.45 138.15) + (xy 160.45 138.25) + (xy 160.35 138.25) + (xy 160.35 138.35) + (xy 160.25 138.35) + (xy 160.25 138.45) + (xy 160.15 138.45) + (xy 160.15 138.55) + (xy 160.05 138.55) + (xy 160.05 138.65) + (xy 159.95 138.65) + (xy 159.95 138.75) + (xy 159.85 138.75) + (xy 159.85 138.85) + (xy 159.75 138.85) + (xy 159.75 138.95) + (xy 159.65 138.95) + (xy 159.65 139.05) + (xy 159.55 139.05) + (xy 159.55 139.15) + (xy 159.45 139.15) + (xy 159.45 139.25) + (xy 159.35 139.25) + (xy 159.35 139.35) + (xy 159.25 139.35) + (xy 159.25 139.45) + (xy 159.15 139.45) + (xy 159.15 139.55) + (xy 159.05 139.55) + (xy 159.05 139.65) + (xy 158.95 139.65) + (xy 158.95 139.75) + (xy 158.85 139.75) + (xy 158.85 139.85) + (xy 158.75 139.85) + (xy 158.75 139.95) + (xy 158.65 139.95) + (xy 158.65 140.05) + (xy 158.55 140.05) + (xy 158.55 140.15) + (xy 158.45 140.15) + (xy 158.45 140.55) + (xy 158.35 140.55) + (xy 158.35 140.65) + (xy 158.25 140.65) + (xy 158.25 140.75) + (xy 158.15 140.75) + (xy 158.15 140.85) + (xy 157.45 140.85) + (xy 157.45 140.75) + (xy 157.35 140.75) + (xy 157.35 140.65) + (xy 157.25 140.65) + (xy 157.25 140.55) + (xy 157.15 140.55) + (xy 157.15 139.95) + (xy 157.05 139.95) + (xy 157.05 139.85) + (xy 156.95 139.85) + (xy 156.95 139.75) + (xy 156.85 139.75) + (xy 156.85 139.85) + (xy 156.75 139.85) + (xy 156.75 139.95) + (xy 156.65 139.95) + (xy 156.65 140.05) + (xy 156.55 140.05) + (xy 156.55 140.15) + (xy 156.45 140.15) + (xy 156.45 140.25) + (xy 156.35 140.25) + (xy 156.35 140.35) + (xy 156.25 140.35) + (xy 156.25 140.45) + (xy 156.15 140.45) + (xy 156.15 140.55) + (xy 156.05 140.55) + (xy 156.05 140.65) + (xy 155.95 140.65) + (xy 155.95 140.75) + (xy 155.85 140.75) + (xy 155.85 140.85) + (xy 155.75 140.85) + (xy 155.75 140.95) + (xy 155.65 140.95) + (xy 155.65 141.05) + (xy 155.55 141.05) + (xy 155.55 141.15) + (xy 155.45 141.15) + (xy 155.45 141.25) + (xy 155.35 141.25) + (xy 155.35 141.35) + (xy 155.25 141.35) + (xy 155.25 141.45) + (xy 155.15 141.45) + (xy 155.15 141.55) + (xy 155.05 141.55) + (xy 155.05 141.65) + (xy 154.95 141.65) + (xy 154.95 141.75) + (xy 154.85 141.75) + (xy 154.85 141.85) + (xy 154.75 141.85) + (xy 154.75 141.95) + (xy 154.65 141.95) + (xy 154.65 142.05) + (xy 154.55 142.05) + (xy 154.55 142.15) + (xy 154.45 142.15) + (xy 154.45 142.25) + (xy 154.35 142.25) + (xy 154.35 142.35) + (xy 154.25 142.35) + (xy 154.25 142.45) + (xy 154.15 142.45) + (xy 154.15 142.55) + (xy 154.05 142.55) + (xy 154.05 142.65) + (xy 153.95 142.65) + (xy 153.95 142.75) + (xy 153.85 142.75) + (xy 153.85 142.85) + (xy 153.75 142.85) + (xy 153.75 142.95) + (xy 153.65 142.95) + (xy 153.65 143.05) + (xy 153.55 143.05) + (xy 153.55 143.15) + (xy 153.45 143.15) + (xy 153.45 143.25) + (xy 153.35 143.25) + (xy 153.35 143.45) + (xy 153.45 143.45) + (xy 153.45 143.55) + (xy 153.55 143.55) + (xy 153.55 143.65) + (xy 153.65 143.65) + (xy 153.65 144.05) + (xy 153.75 144.05) + (xy 153.75 144.15) + (xy 153.85 144.15) + (xy 153.85 144.25) + (xy 153.95 144.25) + (xy 153.95 144.35) + (xy 154.05 144.35) + (xy 154.05 144.45) + (xy 154.15 144.45) + (xy 154.15 144.55) + (xy 154.25 144.55) + (xy 154.25 144.65) + (xy 154.35 144.65) + (xy 154.35 144.75) + (xy 154.45 144.75) + (xy 154.45 144.85) + (xy 154.55 144.85) + (xy 154.55 144.95) + (xy 154.65 144.95) + (xy 154.65 145.05) + (xy 154.75 145.05) + (xy 154.75 145.15) + (xy 154.85 145.15) + (xy 154.85 145.25) + (xy 154.95 145.25) + (xy 154.95 145.35) + (xy 155.05 145.35) + (xy 155.05 145.45) + (xy 155.15 145.45) + (xy 155.15 145.55) + (xy 155.25 145.55) + (xy 155.25 145.65) + (xy 155.35 145.65) + (xy 155.35 145.75) + (xy 155.45 145.75) + (xy 155.45 145.85) + (xy 155.55 145.85) + (xy 155.55 145.95) + (xy 155.65 145.95) + (xy 155.65 146.05) + (xy 155.75 146.05) + (xy 155.75 146.15) + (xy 155.85 146.15) + (xy 155.85 146.25) + (xy 155.95 146.25) + (xy 155.95 146.35) + (xy 156.05 146.35) + (xy 156.05 146.45) + (xy 156.15 146.45) + (xy 156.15 146.55) + (xy 156.25 146.55) + (xy 156.25 146.65) + (xy 156.35 146.65) + (xy 156.35 146.75) + (xy 156.45 146.75) + (xy 156.45 146.85) + (xy 156.55 146.85) + (xy 156.55 146.95) + (xy 156.65 146.95) + (xy 156.65 147.05) + (xy 156.75 147.05) + (xy 156.75 147.15) + (xy 156.85 147.15) + (xy 156.85 147.25) + (xy 156.95 147.25) + (xy 156.95 147.35) + (xy 157.05 147.35) + (xy 157.05 147.25) + (xy 157.15 147.25) + (xy 157.15 147.15) + (xy 157.25 147.15) + (xy 157.25 147.05) + (xy 157.35 147.05) + (xy 157.35 146.95) + (xy 157.45 146.95) + (xy 157.45 146.85) + (xy 157.55 146.85) + (xy 157.55 146.75) + (xy 158.25 146.75) + (xy 158.25 146.85) + (xy 158.35 146.85) + (xy 158.35 146.95) + (xy 158.45 146.95) + (xy 158.45 147.05) + (xy 158.55 147.05) + (xy 158.55 147.45) + (xy 158.65 147.45) + (xy 158.65 147.55) + (xy 158.75 147.55) + (xy 158.75 147.65) + (xy 158.85 147.65) + (xy 158.85 147.75) + (xy 158.95 147.75) + (xy 158.95 147.85) + (xy 159.05 147.85) + (xy 159.05 147.95) + (xy 159.45 147.95) + (xy 159.45 148.05) + (xy 159.55 148.05) + (xy 159.55 148.15) + (xy 159.65 148.15) + (xy 159.65 148.25) + (xy 159.75 148.25) + (xy 159.75 148.95) + (xy 159.65 148.95) + (xy 159.65 149.05) + (xy 159.55 149.05) + (xy 159.55 149.15) + (xy 159.45 149.15) + (xy 159.45 149.25) + (xy 159.25 149.25) + (xy 159.25 149.35) + (xy 159.15 149.35) + (xy 159.15 149.45) + (xy 159.05 149.45) + (xy 159.05 149.75) + (xy 158.95 149.75) + (xy 158.95 149.85) + (xy 158.85 149.85) + (xy 158.85 149.95) + (xy 158.75 149.95) + (xy 158.75 150.05) + (xy 158.05 150.05) + (xy 158.05 149.95) + (xy 157.95 149.95) + (xy 157.95 149.85) + (xy 157.85 149.85) + (xy 157.85 149.75) + (xy 157.75 149.75) + (xy 153.75 149.75) + (xy 153.75 150.45) + (xy 153.65 150.45) + (xy 153.65 153.55) + (xy 153.75 153.55) + (xy 153.75 154.25) + (xy 153.65 154.25) + (xy 153.65 154.35) + (xy 153.55 154.35) + (xy 153.55 154.45) + (xy 153.45 154.45) + (xy 153.45 154.55) + (xy 152.75 154.55) + (xy 152.75 154.45) + (xy 152.65 154.45) + (xy 152.65 154.35) + (xy 152.55 154.35) + (xy 152.55 154.25) + (xy 152.45 154.25) + (xy 152.45 153.55) + (xy 152.55 153.55) + (xy 152.55 150.45) + (xy 152.45 150.45) + (xy 152.45 149.75) + (xy 152.55 149.75) + (xy 152.55 149.65) + (xy 152.65 149.65) + (xy 152.65 149.55) + (xy 152.75 149.55) + (xy 152.75 149.45) + (xy 153.45 149.45) + (xy 153.45 149.55) + (xy 153.55 149.55) + (xy 153.55 149.65) + (xy 153.65 149.65) + (xy 153.65 149.75) + (xy 153.75 149.75) + (xy 157.75 149.75) + (xy 157.75 149.35) + (xy 157.65 149.35) + (xy 157.65 149.25) + (xy 157.55 149.25) + (xy 157.55 149.15) + (xy 157.45 149.15) + (xy 157.45 149.05) + (xy 157.35 149.05) + (xy 157.35 148.95) + (xy 157.25 148.95) + (xy 157.25 148.85) + (xy 157.15 148.85) + (xy 157.15 148.75) + (xy 157.05 148.75) + (xy 157.05 148.65) + (xy 156.95 148.65) + (xy 156.95 148.55) + (xy 156.85 148.55) + (xy 156.85 148.45) + (xy 156.75 148.45) + (xy 156.75 148.35) + (xy 156.65 148.35) + (xy 156.65 148.25) + (xy 156.55 148.25) + (xy 156.55 148.15) + (xy 156.45 148.15) + (xy 156.45 148.05) + (xy 156.35 148.05) + (xy 156.35 147.95) + (xy 156.25 147.95) + (xy 156.25 147.85) + (xy 156.15 147.85) + (xy 156.15 147.75) + (xy 156.05 147.75) + (xy 156.05 147.65) + (xy 155.95 147.65) + (xy 155.95 147.55) + (xy 155.85 147.55) + (xy 155.85 147.45) + (xy 155.75 147.45) + (xy 155.75 147.35) + (xy 155.65 147.35) + (xy 155.65 147.25) + (xy 155.55 147.25) + (xy 155.55 147.15) + (xy 155.45 147.15) + (xy 155.45 147.05) + (xy 155.35 147.05) + (xy 155.35 146.95) + (xy 155.25 146.95) + (xy 155.25 146.85) + (xy 155.15 146.85) + (xy 155.15 146.75) + (xy 155.05 146.75) + (xy 155.05 146.65) + (xy 154.95 146.65) + (xy 154.95 146.55) + (xy 154.85 146.55) + (xy 154.85 146.45) + (xy 154.75 146.45) + (xy 154.75 146.35) + (xy 154.65 146.35) + (xy 154.65 146.25) + (xy 154.55 146.25) + (xy 154.55 146.15) + (xy 154.45 146.15) + (xy 154.45 146.05) + (xy 154.35 146.05) + (xy 154.35 145.95) + (xy 154.25 145.95) + (xy 154.25 145.85) + (xy 154.15 145.85) + (xy 154.15 145.75) + (xy 154.05 145.75) + (xy 154.05 145.65) + (xy 153.95 145.65) + (xy 153.95 145.55) + (xy 153.85 145.55) + (xy 153.85 145.45) + (xy 153.75 145.45) + (xy 153.75 145.35) + (xy 153.65 145.35) + (xy 153.65 145.25) + (xy 153.55 145.25) + (xy 153.55 145.15) + (xy 153.45 145.15) + (xy 153.45 145.05) + (xy 153.35 145.05) + (xy 153.35 144.95) + (xy 153.25 144.95) + (xy 153.25 144.85) + (xy 153.15 144.85) + (xy 153.15 144.75) + (xy 153.05 144.75) + (xy 153.05 144.65) + (xy 152.95 144.65) + (xy 152.95 144.75) + (xy 152.85 144.75) + (xy 152.85 144.85) + (xy 152.75 144.85) + (xy 152.75 147.25) + (xy 152.85 147.25) + (xy 152.85 147.35) + (xy 152.95 147.35) + (xy 152.95 147.45) + (xy 153.35 147.45) + (xy 153.35 147.55) + (xy 153.45 147.55) + (xy 153.45 147.65) + (xy 153.55 147.65) + (xy 153.55 147.75) + (xy 153.65 147.75) + (xy 153.65 148.45) + (xy 153.55 148.45) + (xy 153.55 148.55) + (xy 153.45 148.55) + (xy 153.45 148.65) + (xy 153.35 148.65) + (xy 153.35 148.75) + (xy 152.65 148.75) + (xy 152.65 148.65) + (xy 152.55 148.65) + (xy 136.25 148.65) + (xy 136.25 149.35) + (xy 136.15 149.35) + (xy 136.15 149.45) + (xy 136.05 149.45) + (xy 136.05 149.55) + (xy 135.95 149.55) + (xy 135.95 149.65) + (xy 135.25 149.65) + (xy 135.25 149.55) + (xy 135.15 149.55) + (xy 135.15 149.45) + (xy 133.75 149.45) + (xy 133.75 149.55) + (xy 133.65 149.55) + (xy 133.65 149.65) + (xy 133.55 149.65) + (xy 133.55 149.75) + (xy 133.45 149.75) + (xy 133.45 149.85) + (xy 133.35 149.85) + (xy 133.35 149.95) + (xy 133.25 149.95) + (xy 133.25 150.05) + (xy 133.15 150.05) + (xy 133.15 150.15) + (xy 133.05 150.15) + (xy 133.05 150.25) + (xy 132.95 150.25) + (xy 132.95 150.35) + (xy 132.85 150.35) + (xy 132.85 150.45) + (xy 132.75 150.45) + (xy 132.75 150.55) + (xy 132.65 150.55) + (xy 132.65 150.65) + (xy 132.55 150.65) + (xy 132.55 150.75) + (xy 132.45 150.75) + (xy 132.45 150.85) + (xy 132.35 150.85) + (xy 132.35 150.95) + (xy 132.25 150.95) + (xy 132.25 151.05) + (xy 132.15 151.05) + (xy 132.15 151.15) + (xy 132.05 151.15) + (xy 132.05 151.25) + (xy 131.95 151.25) + (xy 131.95 151.35) + (xy 131.85 151.35) + (xy 131.85 151.45) + (xy 131.75 151.45) + (xy 131.75 151.55) + (xy 131.65 151.55) + (xy 131.65 151.65) + (xy 131.55 151.65) + (xy 131.55 151.75) + (xy 131.45 151.75) + (xy 131.45 151.85) + (xy 131.35 151.85) + (xy 131.35 151.95) + (xy 131.25 151.95) + (xy 131.25 152.05) + (xy 131.15 152.05) + (xy 131.15 152.15) + (xy 131.05 152.15) + (xy 131.05 152.25) + (xy 130.95 152.25) + (xy 130.95 152.35) + (xy 130.85 152.35) + (xy 130.85 152.45) + (xy 130.75 152.45) + (xy 130.75 152.55) + (xy 130.65 152.55) + (xy 130.65 152.65) + (xy 130.55 152.65) + (xy 130.55 152.75) + (xy 130.45 152.75) + (xy 130.45 153.15) + (xy 130.35 153.15) + (xy 130.35 153.25) + (xy 130.25 153.25) + (xy 130.25 153.35) + (xy 130.15 153.35) + (xy 130.15 153.45) + (xy 129.45 153.45) + (xy 129.45 153.35) + (xy 129.35 153.35) + (xy 129.35 153.25) + (xy 129.25 153.25) + (xy 129.25 153.35) + (xy 129.15 153.35) + (xy 129.15 153.45) + (xy 129.05 153.45) + (xy 129.05 153.55) + (xy 128.95 153.55) + (xy 128.95 153.65) + (xy 128.25 153.65) + (xy 128.25 153.55) + (xy 128.15 153.55) + (xy 128.15 153.45) + (xy 128.05 153.45) + (xy 128.05 153.35) + (xy 127.95 153.35) + (xy 127.95 152.75) + (xy 127.85 152.75) + (xy 127.85 152.65) + (xy 127.75 152.65) + (xy 127.75 152.55) + (xy 124.55 152.55) + (xy 124.55 152.45) + (xy 124.45 152.45) + (xy 124.45 152.35) + (xy 124.35 152.35) + (xy 124.35 152.25) + (xy 124.25 152.25) + (xy 124.25 152.15) + (xy 124.15 152.15) + (xy 124.15 152.05) + (xy 124.05 152.05) + (xy 124.05 151.95) + (xy 123.95 151.95) + (xy 123.95 151.85) + (xy 123.85 151.85) + (xy 123.85 151.75) + (xy 123.75 151.75) + (xy 123.75 151.65) + (xy 123.65 151.65) + (xy 123.65 151.55) + (xy 123.55 151.55) + (xy 123.55 151.45) + (xy 123.45 151.45) + (xy 123.45 151.35) + (xy 123.35 151.35) + (xy 123.35 151.25) + (xy 123.25 151.25) + (xy 123.25 151.15) + (xy 123.15 151.15) + (xy 123.15 151.05) + (xy 123.05 151.05) + (xy 123.05 150.95) + (xy 122.95 150.95) + (xy 122.95 150.85) + (xy 122.85 150.85) + (xy 122.85 150.75) + (xy 122.75 150.75) + (xy 122.75 150.65) + (xy 122.65 150.65) + (xy 122.65 150.55) + (xy 122.55 150.55) + (xy 122.55 150.45) + (xy 122.45 150.45) + (xy 122.45 150.35) + (xy 122.35 150.35) + (xy 122.35 150.25) + (xy 122.25 150.25) + (xy 122.25 150.15) + (xy 122.15 150.15) + (xy 122.15 150.05) + (xy 122.05 150.05) + (xy 122.05 149.95) + (xy 121.95 149.95) + (xy 121.95 149.85) + (xy 121.85 149.85) + (xy 121.85 149.75) + (xy 121.75 149.75) + (xy 121.75 149.65) + (xy 121.65 149.65) + (xy 121.65 149.55) + (xy 121.55 149.55) + (xy 121.55 149.45) + (xy 121.45 149.45) + (xy 121.45 149.35) + (xy 121.35 149.35) + (xy 121.35 149.25) + (xy 121.25 149.25) + (xy 121.25 149.15) + (xy 121.15 149.15) + (xy 121.15 149.05) + (xy 121.05 149.05) + (xy 115.95 149.05) + (xy 115.95 149.75) + (xy 115.85 149.75) + (xy 115.85 149.85) + (xy 115.75 149.85) + (xy 115.75 149.95) + (xy 115.65 149.95) + (xy 115.65 150.05) + (xy 114.95 150.05) + (xy 114.95 149.95) + (xy 112.25 149.95) + (xy 112.25 149.85) + (xy 112.05 149.85) + (xy 112.05 149.75) + (xy 111.95 149.75) + (xy 111.95 149.65) + (xy 111.85 149.65) + (xy 111.85 149.55) + (xy 111.75 149.55) + (xy 111.75 149.45) + (xy 111.65 149.45) + (xy 111.65 149.35) + (xy 111.55 149.35) + (xy 111.55 149.25) + (xy 111.45 149.25) + (xy 111.45 149.15) + (xy 111.35 149.15) + (xy 111.35 149.05) + (xy 111.25 149.05) + (xy 111.25 148.95) + (xy 111.15 148.95) + (xy 111.15 148.85) + (xy 111.05 148.85) + (xy 111.05 148.75) + (xy 110.95 148.75) + (xy 110.95 148.65) + (xy 110.85 148.65) + (xy 110.85 148.55) + (xy 110.75 148.55) + (xy 110.75 148.45) + (xy 110.65 148.45) + (xy 110.65 148.35) + (xy 110.55 148.35) + (xy 110.55 148.25) + (xy 110.45 148.25) + (xy 110.45 148.15) + (xy 110.35 148.15) + (xy 110.35 148.05) + (xy 110.25 148.05) + (xy 110.25 147.95) + (xy 110.15 147.95) + (xy 110.15 147.85) + (xy 110.05 147.85) + (xy 110.05 147.75) + (xy 109.95 147.75) + (xy 109.95 147.65) + (xy 109.85 147.65) + (xy 109.85 147.55) + (xy 109.75 147.55) + (xy 109.75 147.45) + (xy 109.65 147.45) + (xy 109.65 147.35) + (xy 109.55 147.35) + (xy 109.55 147.25) + (xy 109.45 147.25) + (xy 109.45 147.15) + (xy 109.25 147.15) + (xy 109.25 147.05) + (xy 109.15 147.05) + (xy 109.15 146.95) + (xy 109.05 146.95) + (xy 109.05 146.85) + (xy 108.95 146.85) + (xy 108.95 146.75) + (xy 108.85 146.75) + (xy 108.85 146.85) + (xy 108.75 146.85) + (xy 108.75 146.95) + (xy 108.65 146.95) + (xy 108.65 147.75) + (xy 108.75 147.75) + (xy 108.75 147.85) + (xy 108.85 147.85) + (xy 108.85 148.55) + (xy 108.75 148.55) + (xy 108.75 148.65) + (xy 108.65 148.65) + (xy 108.65 148.75) + (xy 108.55 148.75) + (xy 108.55 148.85) + (xy 107.85 148.85) + (xy 107.85 148.75) + (xy 107.75 148.75) + (xy 107.75 148.65) + (xy 107.65 148.65) + (xy 107.65 148.55) + (xy 107.55 148.55) + (xy 107.55 147.85) + (xy 107.65 147.85) + (xy 107.65 147.75) + (xy 107.75 147.75) + (xy 107.75 146.85) + (xy 106.75 146.85) + (xy 106.75 146.95) + (xy 106.65 146.95) + (xy 106.65 147.25) + (xy 106.55 147.25) + (xy 106.55 147.35) + (xy 106.45 147.35) + (xy 106.45 147.45) + (xy 106.35 147.45) + (xy 106.35 147.55) + (xy 105.65 147.55) + (xy 105.65 147.45) + (xy 105.55 147.45) + (xy 105.55 147.35) + (xy 105.45 147.35) + (xy 105.45 147.25) + (xy 105.35 147.25) + (xy 105.35 146.95) + (xy 105.25 146.95) + (xy 105.25 146.85) + (xy 105.35 146.85) + (xy 105.35 146.55) + (xy 105.45 146.55) + (xy 105.45 146.35) + (xy 105.65 146.35) + (xy 105.65 146.25) + (xy 105.85 146.25) + (xy 105.85 146.15) + (xy 106.15 146.15) + (xy 106.15 146.25) + (xy 106.35 146.25) + (xy 106.35 146.35) + (xy 106.55 146.35) + (xy 106.55 146.55) + (xy 106.65 146.55) + (xy 106.65 146.85) + (xy 106.75 146.85) + (xy 107.75 146.85) + (xy 107.75 145.95) + (xy 107.65 145.95) + (xy 107.65 145.85) + (xy 107.55 145.85) + (xy 107.55 145.75) + (xy 107.45 145.75) + (xy 107.45 145.65) + (xy 107.35 145.65) + (xy 107.35 145.55) + (xy 107.25 145.55) + (xy 107.25 145.45) + (xy 107.15 145.45) + (xy 107.15 145.35) + (xy 107.05 145.35) + (xy 107.05 145.25) + (xy 106.95 145.25) + (xy 106.95 145.15) + (xy 106.85 145.15) + (xy 106.85 145.05) + (xy 106.75 145.05) + (xy 106.75 144.95) + (xy 106.65 144.95) + (xy 106.65 144.85) + (xy 106.35 144.85) + (xy 106.35 144.95) + (xy 105.95 144.95) + (xy 105.95 144.85) + (xy 105.75 144.85) + (xy 105.75 144.75) + (xy 105.65 144.75) + (xy 105.65 144.65) + (xy 105.55 144.65) + (xy 105.55 144.45) + (xy 105.45 144.45) + (xy 105.45 144.05) + (xy 105.55 144.05) + (xy 105.55 143.85) + (xy 105.65 143.85) + (xy 105.65 143.65) + (xy 105.55 143.65) + (xy 105.55 143.45) + (xy 105.45 143.45) + (xy 105.45 143.05) + (xy 105.55 143.05) + (xy 105.55 142.85) + (xy 105.65 142.85) + (xy 105.65 142.75) + (xy 105.75 142.75) + (xy 105.75 142.65) + (xy 105.95 142.65) + (xy 105.95 142.55) + (xy 106.35 142.55) + (xy 106.35 142.65) + (xy 106.55 142.65) + (xy 106.55 142.75) + (xy 106.65 142.75) + (xy 106.65 142.85) + (xy 106.75 142.85) + (xy 106.75 143.05) + (xy 106.85 143.05) + (xy 106.85 143.45) + (xy 106.75 143.45) + (xy 106.75 143.75) + (xy 106.85 143.75) + (xy 106.85 143.85) + (xy 106.95 143.85) + (xy 106.95 143.95) + (xy 107.05 143.95) + (xy 107.05 144.05) + (xy 107.15 144.05) + (xy 107.15 144.15) + (xy 107.25 144.15) + (xy 107.25 144.25) + (xy 107.35 144.25) + (xy 107.35 144.35) + (xy 107.45 144.35) + (xy 107.45 144.45) + (xy 107.55 144.45) + (xy 107.55 144.55) + (xy 107.65 144.55) + (xy 107.65 144.65) + (xy 107.75 144.65) + (xy 107.75 144.75) + (xy 107.85 144.75) + (xy 107.85 144.85) + (xy 107.95 144.85) + (xy 107.95 144.95) + (xy 108.05 144.95) + (xy 108.05 145.05) + (xy 108.15 145.05) + (xy 108.15 145.15) + (xy 108.25 145.15) + (xy 108.25 145.25) + (xy 108.35 145.25) + (xy 108.35 145.35) + (xy 108.45 145.35) + (xy 108.45 145.45) + (xy 108.55 145.45) + (xy 108.55 145.55) + (xy 108.65 145.55) + (xy 108.65 145.65) + (xy 108.75 145.65) + (xy 108.75 145.75) + (xy 108.85 145.75) + (xy 108.85 145.65) + (xy 108.95 145.65) + (xy 108.95 145.55) + (xy 109.05 145.55) + (xy 109.05 142.15) + (xy 108.95 142.15) + (xy 108.95 141.45) + (xy 109.05 141.45) + (xy 109.05 141.35) + (xy 109.15 141.35) + (xy 109.15 141.25) + (xy 109.25 141.25) + (xy 109.25 141.15) + (xy 109.95 141.15) + (xy 109.95 141.25) + (xy 110.05 141.25) + (xy 110.05 141.35) + (xy 110.15 141.35) + (xy 110.15 141.45) + (xy 110.25 141.45) + (xy 110.25 142.15) + (xy 110.15 142.15) + (xy 110.15 146.15) + (xy 110.25 146.15) + (xy 110.25 146.35) + (xy 110.35 146.35) + (xy 110.35 146.45) + (xy 110.45 146.45) + (xy 110.45 146.55) + (xy 110.55 146.55) + (xy 110.55 146.65) + (xy 110.65 146.65) + (xy 110.65 146.75) + (xy 110.75 146.75) + (xy 110.75 146.85) + (xy 110.85 146.85) + (xy 110.85 146.95) + (xy 110.95 146.95) + (xy 110.95 147.05) + (xy 111.05 147.05) + (xy 111.05 147.15) + (xy 111.15 147.15) + (xy 111.15 147.25) + (xy 111.25 147.25) + (xy 111.25 147.35) + (xy 111.35 147.35) + (xy 111.35 147.45) + (xy 111.45 147.45) + (xy 111.45 147.55) + (xy 111.55 147.55) + (xy 111.55 147.65) + (xy 111.65 147.65) + (xy 111.65 147.75) + (xy 111.75 147.75) + (xy 111.75 147.85) + (xy 111.85 147.85) + (xy 111.85 147.95) + (xy 111.95 147.95) + (xy 111.95 148.05) + (xy 112.05 148.05) + (xy 112.05 148.15) + (xy 112.15 148.15) + (xy 112.15 148.25) + (xy 112.25 148.25) + (xy 112.25 148.35) + (xy 112.35 148.35) + (xy 112.35 148.45) + (xy 112.45 148.45) + (xy 112.45 148.55) + (xy 112.55 148.55) + (xy 112.55 148.65) + (xy 112.65 148.65) + (xy 112.65 148.75) + (xy 112.75 148.75) + (xy 112.75 148.85) + (xy 114.95 148.85) + (xy 114.95 148.75) + (xy 115.65 148.75) + (xy 115.65 148.85) + (xy 115.75 148.85) + (xy 115.75 148.95) + (xy 115.85 148.95) + (xy 115.85 149.05) + (xy 115.95 149.05) + (xy 121.05 149.05) + (xy 121.05 148.95) + (xy 120.95 148.95) + (xy 120.95 148.85) + (xy 120.85 148.85) + (xy 120.85 148.75) + (xy 120.75 148.75) + (xy 120.75 148.65) + (xy 120.65 148.65) + (xy 120.65 148.55) + (xy 120.55 148.55) + (xy 120.55 148.45) + (xy 120.45 148.45) + (xy 120.45 148.35) + (xy 120.35 148.35) + (xy 120.35 148.25) + (xy 120.25 148.25) + (xy 120.25 148.15) + (xy 120.15 148.15) + (xy 120.15 148.05) + (xy 120.05 148.05) + (xy 120.05 147.95) + (xy 119.95 147.95) + (xy 119.95 147.85) + (xy 119.85 147.85) + (xy 119.85 147.75) + (xy 119.75 147.75) + (xy 119.75 147.65) + (xy 119.65 147.65) + (xy 119.65 147.55) + (xy 119.55 147.55) + (xy 119.55 147.45) + (xy 119.45 147.45) + (xy 119.45 147.35) + (xy 119.35 147.35) + (xy 119.35 147.25) + (xy 119.25 147.25) + (xy 119.25 147.15) + (xy 119.15 147.15) + (xy 119.15 147.05) + (xy 119.05 147.05) + (xy 119.05 146.95) + (xy 118.95 146.95) + (xy 118.95 146.85) + (xy 118.85 146.85) + (xy 118.85 146.75) + (xy 118.75 146.75) + (xy 118.75 146.65) + (xy 118.65 146.65) + (xy 118.65 146.55) + (xy 118.55 146.55) + (xy 118.55 146.45) + (xy 118.45 146.45) + (xy 118.45 146.35) + (xy 118.35 146.35) + (xy 118.35 146.25) + (xy 118.25 146.25) + (xy 118.25 146.15) + (xy 118.15 146.15) + (xy 118.15 146.05) + (xy 118.05 146.05) + (xy 118.05 145.95) + (xy 117.65 145.95) + (xy 117.65 145.85) + (xy 117.55 145.85) + (xy 117.55 145.75) + (xy 117.45 145.75) + (xy 117.45 145.65) + (xy 117.35 145.65) + (xy 117.35 144.95) + (xy 117.45 144.95) + (xy 117.45 144.85) + (xy 117.55 144.85) + (xy 117.55 144.75) + (xy 117.65 144.75) + (xy 117.65 144.65) + (xy 118.35 144.65) + (xy 118.35 144.75) + (xy 118.45 144.75) + (xy 118.45 144.85) + (xy 118.55 144.85) + (xy 118.55 144.95) + (xy 118.65 144.95) + (xy 118.65 145.35) + (xy 118.75 145.35) + (xy 118.75 145.45) + (xy 118.85 145.45) + (xy 118.85 145.55) + (xy 118.95 145.55) + (xy 118.95 145.65) + (xy 119.05 145.65) + (xy 119.05 145.75) + (xy 119.15 145.75) + (xy 119.15 145.85) + (xy 119.25 145.85) + (xy 119.25 145.95) + (xy 119.35 145.95) + (xy 119.35 146.05) + (xy 119.45 146.05) + (xy 119.45 146.15) + (xy 119.55 146.15) + (xy 119.55 146.25) + (xy 119.65 146.25) + (xy 119.65 146.35) + (xy 119.75 146.35) + (xy 119.75 146.45) + (xy 119.85 146.45) + (xy 119.85 146.55) + (xy 119.95 146.55) + (xy 119.95 146.65) + (xy 120.05 146.65) + (xy 120.05 146.75) + (xy 120.15 146.75) + (xy 120.15 146.85) + (xy 120.25 146.85) + (xy 120.25 146.95) + (xy 120.35 146.95) + (xy 120.35 147.05) + (xy 120.45 147.05) + (xy 120.45 147.15) + (xy 120.55 147.15) + (xy 120.55 147.25) + (xy 120.65 147.25) + (xy 120.65 147.35) + (xy 120.75 147.35) + (xy 120.75 147.45) + (xy 120.85 147.45) + (xy 120.85 147.55) + (xy 120.95 147.55) + (xy 120.95 147.65) + (xy 121.05 147.65) + (xy 121.05 147.75) + (xy 121.15 147.75) + (xy 121.15 147.85) + (xy 121.25 147.85) + (xy 121.25 147.95) + (xy 121.35 147.95) + (xy 121.35 148.05) + (xy 121.45 148.05) + (xy 121.45 148.15) + (xy 121.55 148.15) + (xy 121.55 148.25) + (xy 121.65 148.25) + (xy 121.65 148.35) + (xy 121.75 148.35) + (xy 121.75 148.45) + (xy 121.85 148.45) + (xy 121.85 148.55) + (xy 121.95 148.55) + (xy 121.95 148.65) + (xy 122.05 148.65) + (xy 122.05 148.75) + (xy 122.15 148.75) + (xy 122.15 148.85) + (xy 122.25 148.85) + (xy 122.25 148.95) + (xy 122.35 148.95) + (xy 122.35 149.05) + (xy 122.45 149.05) + (xy 122.45 149.15) + (xy 122.55 149.15) + (xy 122.55 149.25) + (xy 122.65 149.25) + (xy 122.65 149.35) + (xy 122.75 149.35) + (xy 122.75 149.45) + (xy 122.85 149.45) + (xy 122.85 149.55) + (xy 122.95 149.55) + (xy 122.95 149.65) + (xy 123.05 149.65) + (xy 123.05 149.75) + (xy 123.15 149.75) + (xy 123.15 149.85) + (xy 123.25 149.85) + (xy 123.25 149.95) + (xy 123.35 149.95) + (xy 123.35 150.05) + (xy 123.45 150.05) + (xy 123.45 150.15) + (xy 123.55 150.15) + (xy 123.55 150.25) + (xy 123.65 150.25) + (xy 123.65 150.35) + (xy 123.75 150.35) + (xy 123.75 150.45) + (xy 123.85 150.45) + (xy 123.85 150.55) + (xy 123.95 150.55) + (xy 123.95 150.65) + (xy 124.05 150.65) + (xy 124.05 150.75) + (xy 124.15 150.75) + (xy 124.15 150.85) + (xy 124.25 150.85) + (xy 124.25 150.95) + (xy 124.35 150.95) + (xy 124.35 151.05) + (xy 124.45 151.05) + (xy 124.45 151.15) + (xy 124.55 151.15) + (xy 124.55 151.25) + (xy 124.65 151.25) + (xy 124.65 151.35) + (xy 124.75 151.35) + (xy 124.75 151.45) + (xy 124.85 151.45) + (xy 124.85 151.55) + (xy 124.95 151.55) + (xy 124.95 151.65) + (xy 126.25 151.65) + (xy 126.25 151.55) + (xy 126.35 151.55) + (xy 126.35 151.45) + (xy 126.45 151.45) + (xy 126.45 150.85) + (xy 126.55 150.85) + (xy 126.55 150.75) + (xy 126.65 150.75) + (xy 126.65 146.75) + (xy 126.55 146.75) + (xy 126.55 146.65) + (xy 126.45 146.65) + (xy 126.45 146.55) + (xy 123.45 146.55) + (xy 123.45 146.65) + (xy 123.35 146.65) + (xy 123.35 146.75) + (xy 122.65 146.75) + (xy 122.65 146.65) + (xy 122.55 146.65) + (xy 122.55 146.55) + (xy 122.45 146.55) + (xy 122.45 146.45) + (xy 122.35 146.45) + (xy 122.35 145.75) + (xy 122.45 145.75) + (xy 122.45 145.65) + (xy 122.55 145.65) + (xy 122.55 145.55) + (xy 122.65 145.55) + (xy 122.65 145.45) + (xy 123.35 145.45) + (xy 123.35 145.55) + (xy 123.45 145.55) + (xy 123.45 145.65) + (xy 128.15 145.65) + (xy 128.15 145.55) + (xy 128.25 145.55) + (xy 128.25 145.45) + (xy 128.35 145.45) + (xy 128.35 145.35) + (xy 128.25 145.35) + (xy 128.25 145.25) + (xy 128.15 145.25) + (xy 128.15 145.15) + (xy 128.05 145.15) + (xy 128.05 145.05) + (xy 127.95 145.05) + (xy 127.95 144.95) + (xy 127.85 144.95) + (xy 127.85 144.85) + (xy 127.75 144.85) + (xy 127.75 144.75) + (xy 127.65 144.75) + (xy 127.65 144.65) + (xy 127.55 144.65) + (xy 127.55 144.55) + (xy 121.45 144.55) + (xy 121.45 144.65) + (xy 121.35 144.65) + (xy 121.35 144.75) + (xy 120.65 144.75) + (xy 120.65 144.65) + (xy 120.55 144.65) + (xy 120.55 144.55) + (xy 120.45 144.55) + (xy 120.45 144.45) + (xy 120.35 144.45) + (xy 120.35 143.75) + (xy 120.45 143.75) + (xy 120.45 143.65) + (xy 120.55 143.65) + (xy 120.55 143.55) + (xy 120.65 143.55) + (xy 120.65 143.45) + (xy 121.35 143.45) + (xy 121.35 143.55) + (xy 121.45 143.55) + (xy 121.45 143.65) + (xy 127.95 143.65) + (xy 127.95 143.75) + (xy 128.05 143.75) + (xy 128.05 143.85) + (xy 128.15 143.85) + (xy 128.15 143.95) + (xy 128.25 143.95) + (xy 128.25 144.05) + (xy 128.35 144.05) + (xy 128.35 144.15) + (xy 128.45 144.15) + (xy 128.45 144.25) + (xy 128.55 144.25) + (xy 128.55 144.35) + (xy 128.65 144.35) + (xy 128.65 144.45) + (xy 128.75 144.45) + (xy 128.75 144.55) + (xy 128.85 144.55) + (xy 128.85 144.65) + (xy 128.95 144.65) + (xy 128.95 144.75) + (xy 129.05 144.75) + (xy 129.05 144.85) + (xy 129.15 144.85) + (xy 129.15 144.95) + (xy 129.25 144.95) + (xy 129.25 145.05) + (xy 129.35 145.05) + (xy 129.35 145.15) + (xy 129.45 145.15) + (xy 129.45 145.25) + (xy 129.55 145.25) + (xy 129.55 145.35) + (xy 129.65 145.35) + (xy 129.65 145.45) + (xy 129.75 145.45) + (xy 129.75 145.55) + (xy 129.85 145.55) + (xy 129.85 145.65) + (xy 129.95 145.65) + (xy 129.95 145.75) + (xy 130.05 145.75) + (xy 130.05 145.85) + (xy 130.15 145.85) + (xy 130.15 145.95) + (xy 130.25 145.95) + (xy 130.25 146.05) + (xy 130.35 146.05) + (xy 130.35 146.15) + (xy 130.45 146.15) + (xy 130.45 146.25) + (xy 130.55 146.25) + (xy 130.55 146.35) + (xy 130.65 146.35) + (xy 130.65 146.45) + (xy 130.75 146.45) + (xy 130.75 146.55) + (xy 130.85 146.55) + (xy 130.85 146.65) + (xy 130.95 146.65) + (xy 130.95 146.75) + (xy 131.05 146.75) + (xy 131.05 146.85) + (xy 131.15 146.85) + (xy 131.15 146.95) + (xy 131.25 146.95) + (xy 131.25 147.05) + (xy 131.35 147.05) + (xy 131.35 147.15) + (xy 131.55 147.15) + (xy 131.55 147.05) + (xy 131.65 147.05) + (xy 131.65 146.95) + (xy 131.75 146.95) + (xy 131.75 146.85) + (xy 131.85 146.85) + (xy 131.85 146.75) + (xy 132.55 146.75) + (xy 132.55 146.85) + (xy 132.65 146.85) + (xy 132.65 146.95) + (xy 133.45 146.95) + (xy 133.45 147.05) + (xy 133.55 147.05) + (xy 133.55 147.15) + (xy 133.65 147.15) + (xy 133.65 147.25) + (xy 133.75 147.25) + (xy 133.75 147.35) + (xy 133.85 147.35) + (xy 133.85 147.45) + (xy 133.95 147.45) + (xy 133.95 147.55) + (xy 134.05 147.55) + (xy 134.05 148.35) + (xy 134.15 148.35) + (xy 134.15 148.45) + (xy 134.25 148.45) + (xy 134.25 148.55) + (xy 135.15 148.55) + (xy 135.15 148.45) + (xy 135.25 148.45) + (xy 135.25 148.35) + (xy 135.95 148.35) + (xy 135.95 148.45) + (xy 136.05 148.45) + (xy 136.05 148.55) + (xy 136.15 148.55) + (xy 136.15 148.65) + (xy 136.25 148.65) + (xy 152.55 148.65) + (xy 152.55 148.55) + (xy 152.45 148.55) + (xy 152.45 148.45) + (xy 152.35 148.45) + (xy 152.35 148.05) + (xy 152.25 148.05) + (xy 152.25 147.95) + (xy 152.15 147.95) + (xy 152.15 147.85) + (xy 152.05 147.85) + (xy 152.05 147.75) + (xy 151.95 147.75) + (xy 151.95 147.65) + (xy 151.85 147.65) + (xy 151.85 143.45) + (xy 151.95 143.45) + (xy 151.95 143.35) + (xy 152.05 143.35) + (xy 152.05 143.25) + (xy 152.15 143.25) + (xy 152.15 143.15) + (xy 152.25 143.15) + (xy 152.25 143.05) + (xy 152.35 143.05) + (xy 152.35 142.95) + (xy 152.45 142.95) + (xy 152.45 142.85) + (xy 152.55 142.85) + (xy 152.55 142.75) + (xy 152.65 142.75) + (xy 152.65 142.65) + (xy 152.75 142.65) + (xy 152.75 142.55) + (xy 152.85 142.55) + (xy 152.85 142.45) + (xy 152.95 142.45) + (xy 152.95 142.35) + (xy 153.05 142.35) + (xy 153.05 142.25) + (xy 153.15 142.25) + (xy 153.15 142.15) + (xy 153.25 142.15) + (xy 153.25 142.05) + (xy 153.35 142.05) + (xy 153.35 141.95) + (xy 153.45 141.95) + (xy 153.45 141.85) + (xy 153.55 141.85) + (xy 153.55 141.75) + (xy 153.65 141.75) + (xy 153.65 141.65) + (xy 153.75 141.65) + (xy 153.75 141.55) + (xy 153.85 141.55) + (xy 153.85 141.45) + (xy 153.95 141.45) + (xy 153.95 141.35) + (xy 154.05 141.35) + (xy 154.05 141.25) + (xy 154.15 141.25) + (xy 154.15 141.15) + (xy 154.25 141.15) + (xy 154.25 141.05) + (xy 154.35 141.05) + (xy 154.35 140.95) + (xy 154.45 140.95) + (xy 154.45 140.85) + (xy 154.55 140.85) + (xy 154.55 140.75) + (xy 154.65 140.75) + (xy 154.65 140.65) + (xy 154.75 140.65) + (xy 154.75 140.55) + (xy 154.85 140.55) + (xy 154.85 140.45) + (xy 154.95 140.45) + (xy 154.95 140.35) + (xy 155.05 140.35) + (xy 155.05 140.25) + (xy 155.15 140.25) + (xy 155.15 140.15) + (xy 155.25 140.15) + (xy 155.25 140.05) + (xy 155.35 140.05) + (xy 155.35 139.95) + (xy 155.45 139.95) + (xy 155.45 139.85) + (xy 155.55 139.85) + (xy 155.55 139.75) + (xy 155.65 139.75) + (xy 155.65 139.65) + (xy 155.75 139.65) + (xy 155.75 139.55) + (xy 155.85 139.55) + (xy 155.85 139.45) + (xy 155.95 139.45) + (xy 155.95 139.35) + (xy 156.05 139.35) + (xy 156.05 139.25) + (xy 156.15 139.25) + (xy 156.15 139.15) + (xy 156.25 139.15) + (xy 156.25 139.05) + (xy 156.35 139.05) + (xy 156.35 138.95) + (xy 156.45 138.95) + (xy 156.45 138.85) + (xy 156.55 138.85) + (xy 156.55 138.75) + (xy 156.65 138.75) + (xy 156.65 138.65) + (xy 156.75 138.65) + (xy 156.75 138.55) + (xy 156.85 138.55) + (xy 156.85 138.45) + (xy 156.95 138.45) + (xy 156.95 138.35) + (xy 157.05 138.35) + (xy 157.05 138.25) + (xy 157.15 138.25) + (xy 157.15 138.15) + (xy 157.25 138.15) + (xy 157.25 138.05) + (xy 157.35 138.05) + (xy 157.35 137.95) + (xy 157.45 137.95) + (xy 157.45 137.85) + (xy 157.55 137.85) + (xy 157.55 137.75) + (xy 157.65 137.75) + (xy 157.65 137.65) + (xy 157.75 137.65) + (xy 157.75 137.55) + (xy 157.85 137.55) + (xy 157.85 137.45) + (xy 157.95 137.45) + (xy 157.95 137.35) + (xy 158.05 137.35) + (xy 158.05 137.25) + (xy 158.15 137.25) + (xy 158.15 137.15) + (xy 158.25 137.15) + (xy 158.25 137.05) + (xy 158.35 137.05) + (xy 158.35 136.95) + (xy 158.45 136.95) + (xy 158.45 136.85) + (xy 158.55 136.85) + (xy 158.55 136.75) + (xy 158.65 136.75) + (xy 158.65 136.65) + (xy 158.75 136.65) + (xy 158.75 136.55) + (xy 158.85 136.55) + (xy 158.85 136.45) + (xy 158.95 136.45) + (xy 158.95 136.35) + (xy 159.05 136.35) + (xy 159.05 136.25) + (xy 159.15 136.25) + (xy 159.15 136.15) + (xy 159.25 136.15) + (xy 159.25 136.05) + (xy 159.35 136.05) + (xy 159.35 135.95) + (xy 159.45 135.95) + (xy 159.45 135.85) + (xy 159.55 135.85) + (xy 159.55 135.75) + (xy 159.65 135.75) + (xy 159.65 135.65) + (xy 159.75 135.65) + (xy 159.75 135.55) + (xy 159.85 135.55) + (xy 159.85 135.45) + (xy 159.95 135.45) + (xy 159.95 135.35) + (xy 160.05 135.35) + (xy 160.05 135.25) + (xy 160.15 135.25) + (xy 160.15 135.15) + (xy 160.25 135.15) + (xy 160.25 135.05) + (xy 160.35 135.05) + (xy 160.35 134.95) + (xy 160.45 134.95) + (xy 160.45 134.85) + (xy 160.55 134.85) + (xy 160.55 134.75) + (xy 160.65 134.75) + (xy 160.65 134.65) + (xy 160.75 134.65) + (xy 160.75 134.55) + (xy 160.85 134.55) + (xy 160.85 134.45) + (xy 160.95 134.45) + (xy 160.95 134.35) + (xy 161.05 134.35) + (xy 161.05 134.25) + (xy 161.15 134.25) + (xy 161.15 131.15) + (xy 161.05 131.15) + (xy 161.05 131.05) + (xy 160.95 131.05) + (xy 160.95 130.95) + (xy 160.85 130.95) + (xy 160.85 131.05) + (xy 160.75 131.05) + (xy 160.75 131.15) + (xy 160.65 131.15) + (xy 160.65 131.25) + (xy 160.55 131.25) + (xy 160.55 131.35) + (xy 160.45 131.35) + (xy 160.45 131.45) + (xy 160.35 131.45) + (xy 160.35 131.55) + (xy 160.25 131.55) + (xy 160.25 131.65) + (xy 160.15 131.65) + (xy 160.15 131.75) + (xy 160.05 131.75) + (xy 160.05 131.85) + (xy 159.95 131.85) + (xy 159.95 131.95) + (xy 159.85 131.95) + (xy 159.85 132.05) + (xy 159.75 132.05) + (xy 159.75 132.15) + (xy 159.65 132.15) + (xy 159.65 132.25) + (xy 159.55 132.25) + (xy 159.55 132.35) + (xy 159.45 132.35) + (xy 159.45 132.45) + (xy 159.35 132.45) + (xy 159.35 132.55) + (xy 159.25 132.55) + (xy 159.25 132.65) + (xy 159.15 132.65) + (xy 159.15 132.75) + (xy 159.05 132.75) + (xy 159.05 132.85) + (xy 158.95 132.85) + (xy 158.95 132.95) + (xy 158.85 132.95) + (xy 158.85 133.05) + (xy 158.75 133.05) + (xy 158.75 133.15) + (xy 158.65 133.15) + (xy 158.65 133.25) + (xy 158.55 133.25) + (xy 158.55 133.35) + (xy 158.45 133.35) + (xy 158.45 133.45) + (xy 158.35 133.45) + (xy 158.35 133.55) + (xy 158.25 133.55) + (xy 158.25 133.65) + (xy 158.15 133.65) + (xy 158.15 133.75) + (xy 158.05 133.75) + (xy 158.05 133.85) + (xy 157.95 133.85) + (xy 157.95 133.95) + (xy 157.85 133.95) + (xy 157.85 134.05) + (xy 157.75 134.05) + (xy 157.75 134.15) + (xy 157.65 134.15) + (xy 157.65 134.25) + (xy 157.55 134.25) + (xy 157.55 134.35) + (xy 157.45 134.35) + (xy 157.45 134.45) + (xy 157.35 134.45) + (xy 157.35 134.55) + (xy 157.25 134.55) + (xy 157.25 134.65) + (xy 157.15 134.65) + (xy 157.15 134.75) + (xy 157.05 134.75) + (xy 157.05 134.85) + (xy 156.95 134.85) + (xy 156.95 134.95) + (xy 156.85 134.95) + (xy 156.85 135.05) + (xy 156.75 135.05) + (xy 156.75 135.15) + (xy 156.65 135.15) + (xy 156.65 135.25) + (xy 156.55 135.25) + (xy 156.55 135.35) + (xy 156.45 135.35) + (xy 156.45 135.45) + (xy 156.35 135.45) + (xy 156.35 135.55) + (xy 156.25 135.55) + (xy 156.25 135.65) + (xy 156.15 135.65) + (xy 156.15 135.75) + (xy 156.05 135.75) + (xy 156.05 135.85) + (xy 155.95 135.85) + (xy 155.95 135.95) + (xy 155.85 135.95) + (xy 155.85 136.05) + (xy 155.75 136.05) + (xy 155.75 136.15) + (xy 155.65 136.15) + (xy 155.65 136.25) + (xy 155.55 136.25) + (xy 155.55 136.35) + (xy 155.45 136.35) + (xy 155.45 136.45) + (xy 155.35 136.45) + (xy 155.35 136.55) + (xy 155.25 136.55) + (xy 155.25 136.65) + (xy 155.15 136.65) + (xy 155.15 136.75) + (xy 155.05 136.75) + (xy 155.05 136.85) + (xy 154.95 136.85) + (xy 154.95 136.95) + (xy 154.85 136.95) + (xy 154.85 137.05) + (xy 154.75 137.05) + (xy 154.75 137.15) + (xy 154.65 137.15) + (xy 154.65 137.25) + (xy 154.55 137.25) + (xy 154.55 137.35) + (xy 154.45 137.35) + (xy 154.45 137.45) + (xy 154.35 137.45) + (xy 154.35 137.55) + (xy 154.25 137.55) + (xy 154.25 137.65) + (xy 154.15 137.65) + (xy 154.15 137.75) + (xy 154.05 137.75) + (xy 154.05 137.85) + (xy 153.95 137.85) + (xy 153.95 137.95) + (xy 153.85 137.95) + (xy 153.85 138.05) + (xy 153.75 138.05) + (xy 153.75 138.15) + (xy 153.65 138.15) + (xy 153.65 138.25) + (xy 153.55 138.25) + (xy 153.55 138.35) + (xy 153.45 138.35) + (xy 153.45 138.45) + (xy 153.35 138.45) + (xy 153.35 138.55) + (xy 153.25 138.55) + (xy 153.25 138.65) + (xy 153.15 138.65) + (xy 153.15 138.75) + (xy 153.05 138.75) + (xy 153.05 138.85) + (xy 152.95 138.85) + (xy 152.95 138.95) + (xy 152.85 138.95) + (xy 152.85 139.05) + (xy 152.75 139.05) + (xy 152.75 139.15) + (xy 152.65 139.15) + (xy 152.65 139.25) + (xy 152.55 139.25) + (xy 152.55 139.35) + (xy 152.45 139.35) + (xy 152.45 139.45) + (xy 152.35 139.45) + (xy 152.35 139.55) + (xy 152.25 139.55) + (xy 152.25 139.65) + (xy 152.15 139.65) + (xy 152.15 139.75) + (xy 152.05 139.75) + (xy 152.05 139.85) + (xy 151.95 139.85) + (xy 151.95 139.95) + (xy 151.85 139.95) + (xy 151.85 140.05) + (xy 151.75 140.05) + (xy 151.75 140.15) + (xy 151.65 140.15) + (xy 151.65 140.25) + (xy 151.55 140.25) + (xy 151.55 140.35) + (xy 151.45 140.35) + (xy 151.45 140.45) + (xy 151.35 140.45) + (xy 151.35 140.55) + (xy 151.25 140.55) + (xy 151.25 140.65) + (xy 151.15 140.65) + (xy 151.15 140.75) + (xy 151.05 140.75) + (xy 151.05 141.15) + (xy 150.95 141.15) + (xy 150.95 141.25) + (xy 150.85 141.25) + (xy 150.85 141.35) + (xy 150.75 141.35) + (xy 150.75 141.45) + (xy 150.05 141.45) + (xy 150.05 141.35) + (xy 149.95 141.35) + (xy 149.95 141.25) + (xy 149.85 141.25) + (xy 149.85 141.15) + (xy 149.75 141.15) + (xy 149.75 141.05) + (xy 106.75 141.05) + (xy 106.75 141.15) + (xy 106.65 141.15) + (xy 106.65 141.45) + (xy 106.55 141.45) + (xy 106.55 141.65) + (xy 106.35 141.65) + (xy 106.35 141.75) + (xy 106.15 141.75) + (xy 106.15 141.85) + (xy 105.85 141.85) + (xy 105.85 141.75) + (xy 105.65 141.75) + (xy 105.65 141.65) + (xy 105.45 141.65) + (xy 105.45 141.45) + (xy 105.35 141.45) + (xy 105.35 141.15) + (xy 105.25 141.15) + (xy 105.25 141.05) + (xy 105.35 141.05) + (xy 105.35 140.75) + (xy 105.45 140.75) + (xy 105.45 140.65) + (xy 105.55 140.65) + (xy 105.55 140.55) + (xy 105.65 140.55) + (xy 105.65 140.45) + (xy 106.35 140.45) + (xy 106.35 140.55) + (xy 106.45 140.55) + (xy 106.45 140.65) + (xy 106.55 140.65) + (xy 106.55 140.75) + (xy 106.65 140.75) + (xy 106.65 141.05) + (xy 106.75 141.05) + (xy 149.75 141.05) + (xy 149.75 140.45) + (xy 149.85 140.45) + (xy 149.85 140.35) + (xy 149.95 140.35) + (xy 149.95 140.25) + (xy 150.05 140.25) + (xy 150.05 140.15) + (xy 150.45 140.15) + (xy 150.45 140.05) + (xy 150.55 140.05) + (xy 150.55 139.95) + (xy 150.65 139.95) + (xy 150.65 139.85) + (xy 150.75 139.85) + (xy 150.75 139.75) + (xy 150.85 139.75) + (xy 150.85 139.65) + (xy 150.95 139.65) + (xy 150.95 139.55) + (xy 151.05 139.55) + (xy 151.05 139.45) + (xy 151.15 139.45) + (xy 151.15 139.35) + (xy 151.25 139.35) + (xy 151.25 139.25) + (xy 151.35 139.25) + (xy 151.35 139.15) + (xy 151.45 139.15) + (xy 151.45 139.05) + (xy 151.55 139.05) + (xy 151.55 138.95) + (xy 151.65 138.95) + (xy 151.65 138.85) + (xy 151.75 138.85) + (xy 151.75 138.75) + (xy 151.85 138.75) + (xy 151.85 138.65) + (xy 151.95 138.65) + (xy 151.95 138.55) + (xy 152.05 138.55) + (xy 152.05 138.45) + (xy 152.15 138.45) + (xy 152.15 138.35) + (xy 152.25 138.35) + (xy 152.25 138.25) + (xy 152.35 138.25) + (xy 152.35 138.15) + (xy 152.45 138.15) + (xy 152.45 138.05) + (xy 152.55 138.05) + (xy 152.55 137.95) + (xy 152.65 137.95) + (xy 152.65 137.85) + (xy 152.75 137.85) + (xy 152.75 137.75) + (xy 152.85 137.75) + (xy 152.85 137.65) + (xy 152.95 137.65) + (xy 152.95 137.55) + (xy 153.05 137.55) + (xy 153.05 137.45) + (xy 153.15 137.45) + (xy 153.15 137.35) + (xy 153.25 137.35) + (xy 153.25 137.25) + (xy 153.35 137.25) + (xy 153.35 137.15) + (xy 153.45 137.15) + (xy 153.45 137.05) + (xy 153.55 137.05) + (xy 153.55 136.95) + (xy 153.65 136.95) + (xy 153.65 136.85) + (xy 153.75 136.85) + (xy 153.75 136.75) + (xy 153.85 136.75) + (xy 153.85 136.65) + (xy 153.95 136.65) + (xy 153.95 136.55) + (xy 154.05 136.55) + (xy 154.05 136.45) + (xy 154.15 136.45) + (xy 154.15 136.35) + (xy 154.25 136.35) + (xy 154.25 136.25) + (xy 154.35 136.25) + (xy 154.35 136.15) + (xy 154.45 136.15) + (xy 154.45 136.05) + (xy 154.55 136.05) + (xy 154.55 135.95) + (xy 154.65 135.95) + (xy 154.65 135.85) + (xy 154.75 135.85) + (xy 154.75 135.75) + (xy 154.85 135.75) + (xy 154.85 135.65) + (xy 154.95 135.65) + (xy 154.95 135.55) + (xy 155.05 135.55) + (xy 155.05 135.45) + (xy 155.15 135.45) + (xy 155.15 135.35) + (xy 155.25 135.35) + (xy 155.25 135.25) + (xy 155.35 135.25) + (xy 155.35 135.15) + (xy 155.45 135.15) + (xy 155.45 135.05) + (xy 155.55 135.05) + (xy 155.55 134.95) + (xy 155.65 134.95) + (xy 155.65 134.85) + (xy 155.75 134.85) + (xy 155.75 134.75) + (xy 155.85 134.75) + (xy 155.85 134.65) + (xy 155.95 134.65) + (xy 155.95 134.55) + (xy 156.05 134.55) + (xy 156.05 134.45) + (xy 156.15 134.45) + (xy 156.15 134.35) + (xy 156.25 134.35) + (xy 156.25 134.25) + (xy 156.35 134.25) + (xy 156.35 134.15) + (xy 156.45 134.15) + (xy 156.45 134.05) + (xy 156.55 134.05) + (xy 156.55 133.95) + (xy 156.65 133.95) + (xy 156.65 133.85) + (xy 156.75 133.85) + (xy 156.75 133.75) + (xy 156.85 133.75) + (xy 156.85 133.65) + (xy 156.95 133.65) + (xy 156.95 133.55) + (xy 157.05 133.55) + (xy 157.05 133.45) + (xy 157.15 133.45) + (xy 157.15 133.35) + (xy 157.25 133.35) + (xy 157.25 133.25) + (xy 157.35 133.25) + (xy 157.35 133.15) + (xy 157.45 133.15) + (xy 157.45 133.05) + (xy 157.55 133.05) + (xy 157.55 132.95) + (xy 157.65 132.95) + (xy 157.65 132.85) + (xy 157.75 132.85) + (xy 157.75 132.75) + (xy 157.85 132.75) + (xy 157.85 132.65) + (xy 157.95 132.65) + (xy 157.95 132.55) + (xy 158.05 132.55) + (xy 158.05 132.45) + (xy 158.15 132.45) + (xy 158.15 132.35) + (xy 158.25 132.35) + (xy 158.25 132.25) + (xy 158.35 132.25) + (xy 158.35 132.15) + (xy 158.45 132.15) + (xy 158.45 132.05) + (xy 158.55 132.05) + (xy 158.55 131.95) + (xy 158.65 131.95) + (xy 158.65 131.85) + (xy 158.75 131.85) + (xy 158.75 131.75) + (xy 158.85 131.75) + (xy 158.85 131.65) + (xy 158.95 131.65) + (xy 158.95 131.55) + (xy 159.05 131.55) + (xy 159.05 131.45) + (xy 159.15 131.45) + (xy 159.15 131.35) + (xy 159.25 131.35) + (xy 159.25 131.25) + (xy 159.35 131.25) + (xy 159.35 131.15) + (xy 159.45 131.15) + (xy 159.45 131.05) + (xy 159.55 131.05) + (xy 159.55 130.95) + (xy 159.65 130.95) + (xy 159.65 130.85) + (xy 159.75 130.85) + (xy 159.75 130.75) + (xy 159.85 130.75) + (xy 159.85 130.65) + (xy 159.95 130.65) + (xy 159.95 130.55) + (xy 160.05 130.55) + (xy 160.05 130.45) + (xy 160.15 130.45) + (xy 160.15 130.35) + (xy 160.25 130.35) + (xy 160.25 130.25) + (xy 160.35 130.25) + (xy 160.35 130.15) + (xy 160.45 130.15) + (xy 160.45 120.45) + (xy 160.35 120.45) + (xy 160.35 120.35) + (xy 160.25 120.35) + (xy 160.25 120.25) + (xy 159.65 120.25) + (xy 159.65 120.15) + (xy 159.55 120.15) + (xy 159.55 120.05) + (xy 159.45 120.05) + (xy 159.45 120.15) + (xy 159.35 120.15) + (xy 159.35 120.25) + (xy 159.25 120.25) + (xy 159.25 130.55) + (xy 159.15 130.55) + (xy 159.15 130.65) + (xy 159.05 130.65) + (xy 159.05 130.75) + (xy 158.95 130.75) + (xy 158.95 130.85) + (xy 158.85 130.85) + (xy 158.85 130.95) + (xy 158.75 130.95) + (xy 158.75 131.05) + (xy 158.65 131.05) + (xy 158.65 131.15) + (xy 158.55 131.15) + (xy 158.55 131.25) + (xy 158.45 131.25) + (xy 158.45 131.35) + (xy 158.35 131.35) + (xy 158.35 131.45) + (xy 158.25 131.45) + (xy 158.25 131.55) + (xy 158.15 131.55) + (xy 158.15 131.65) + (xy 158.05 131.65) + (xy 158.05 131.75) + (xy 157.95 131.75) + (xy 157.95 131.85) + (xy 157.85 131.85) + (xy 157.85 131.95) + (xy 157.75 131.95) + (xy 157.75 132.05) + (xy 157.65 132.05) + (xy 157.65 132.15) + (xy 157.55 132.15) + (xy 157.55 132.25) + (xy 157.45 132.25) + (xy 157.45 132.35) + (xy 157.35 132.35) + (xy 157.35 132.45) + (xy 157.25 132.45) + (xy 157.25 132.55) + (xy 157.15 132.55) + (xy 157.15 132.65) + (xy 157.05 132.65) + (xy 157.05 132.75) + (xy 156.95 132.75) + (xy 156.95 132.85) + (xy 156.85 132.85) + (xy 156.85 132.95) + (xy 156.75 132.95) + (xy 156.75 133.05) + (xy 156.65 133.05) + (xy 156.65 133.15) + (xy 156.55 133.15) + (xy 156.55 133.25) + (xy 156.45 133.25) + (xy 156.45 133.35) + (xy 156.35 133.35) + (xy 156.35 133.45) + (xy 156.25 133.45) + (xy 156.25 133.55) + (xy 156.15 133.55) + (xy 156.15 133.65) + (xy 156.05 133.65) + (xy 156.05 133.75) + (xy 155.95 133.75) + (xy 155.95 133.85) + (xy 155.85 133.85) + (xy 155.85 133.95) + (xy 155.75 133.95) + (xy 155.75 134.05) + (xy 155.65 134.05) + (xy 155.65 134.15) + (xy 155.55 134.15) + (xy 155.55 134.25) + (xy 155.45 134.25) + (xy 155.45 134.35) + (xy 155.35 134.35) + (xy 155.35 134.45) + (xy 155.25 134.45) + (xy 155.25 134.55) + (xy 155.15 134.55) + (xy 155.15 134.65) + (xy 155.05 134.65) + (xy 155.05 134.75) + (xy 154.95 134.75) + (xy 154.95 134.85) + (xy 154.85 134.85) + (xy 154.85 134.95) + (xy 154.75 134.95) + (xy 154.75 135.05) + (xy 154.65 135.05) + (xy 154.65 135.15) + (xy 154.55 135.15) + (xy 154.55 135.25) + (xy 154.45 135.25) + (xy 154.45 135.35) + (xy 154.35 135.35) + (xy 154.35 135.45) + (xy 154.25 135.45) + (xy 154.25 135.55) + (xy 154.15 135.55) + (xy 154.15 135.65) + (xy 154.05 135.65) + (xy 154.05 135.75) + (xy 153.95 135.75) + (xy 153.95 135.85) + (xy 153.85 135.85) + (xy 153.85 135.95) + (xy 153.75 135.95) + (xy 153.75 136.05) + (xy 153.65 136.05) + (xy 153.65 136.15) + (xy 153.55 136.15) + (xy 153.55 136.25) + (xy 153.45 136.25) + (xy 153.45 136.35) + (xy 153.35 136.35) + (xy 153.35 136.45) + (xy 153.25 136.45) + (xy 153.25 136.55) + (xy 153.15 136.55) + (xy 153.15 136.65) + (xy 153.05 136.65) + (xy 153.05 136.75) + (xy 152.95 136.75) + (xy 152.95 136.85) + (xy 152.85 136.85) + (xy 152.85 137.25) + (xy 152.75 137.25) + (xy 152.75 137.35) + (xy 152.65 137.35) + (xy 152.65 137.45) + (xy 152.55 137.45) + (xy 152.55 137.55) + (xy 151.85 137.55) + (xy 151.85 137.45) + (xy 151.75 137.45) + (xy 151.75 137.35) + (xy 151.65 137.35) + (xy 151.65 137.25) + (xy 151.55 137.25) + (xy 124.85 137.25) + (xy 124.85 137.95) + (xy 124.75 137.95) + (xy 124.75 138.05) + (xy 124.65 138.05) + (xy 124.65 138.15) + (xy 124.55 138.15) + (xy 124.55 138.25) + (xy 117.35 138.25) + (xy 117.35 138.15) + (xy 117.25 138.15) + (xy 117.25 138.05) + (xy 117.15 138.05) + (xy 117.15 137.95) + (xy 117.05 137.95) + (xy 117.05 137.25) + (xy 117.15 137.25) + (xy 117.15 137.15) + (xy 117.25 137.15) + (xy 117.25 137.05) + (xy 117.35 137.05) + (xy 117.35 136.95) + (xy 117.45 136.95) + (xy 117.45 136.85) + (xy 117.55 136.85) + (xy 117.55 136.75) + (xy 117.45 136.75) + (xy 117.45 136.65) + (xy 117.35 136.65) + (xy 117.35 136.55) + (xy 117.15 136.55) + (xy 117.15 136.45) + (xy 116.95 136.45) + (xy 116.95 136.25) + (xy 116.85 136.25) + (xy 116.85 133.75) + (xy 116.95 133.75) + (xy 116.95 133.55) + (xy 117.15 133.55) + (xy 117.15 133.45) + (xy 118.85 133.45) + (xy 118.85 133.55) + (xy 119.05 133.55) + (xy 119.05 133.75) + (xy 119.15 133.75) + (xy 119.15 136.25) + (xy 119.05 136.25) + (xy 119.05 136.45) + (xy 118.85 136.45) + (xy 118.85 136.55) + (xy 118.75 136.55) + (xy 118.75 136.65) + (xy 118.65 136.65) + (xy 118.65 136.75) + (xy 118.75 136.75) + (xy 118.75 136.85) + (xy 118.85 136.85) + (xy 118.85 136.95) + (xy 122.85 136.95) + (xy 122.85 136.85) + (xy 122.95 136.85) + (xy 122.95 136.75) + (xy 123.05 136.75) + (xy 123.05 136.65) + (xy 122.95 136.65) + (xy 122.95 136.55) + (xy 122.85 136.55) + (xy 122.85 136.45) + (xy 122.55 136.45) + (xy 122.55 136.35) + (xy 122.35 136.35) + (xy 122.35 136.25) + (xy 122.25 136.25) + (xy 122.25 136.15) + (xy 122.15 136.15) + (xy 122.15 135.95) + (xy 122.05 135.95) + (xy 122.05 135.75) + (xy 121.95 135.75) + (xy 121.95 134.25) + (xy 122.05 134.25) + (xy 122.05 134.05) + (xy 122.15 134.05) + (xy 122.15 133.85) + (xy 122.25 133.85) + (xy 122.25 133.75) + (xy 122.35 133.75) + (xy 122.35 133.65) + (xy 122.55 133.65) + (xy 122.55 133.55) + (xy 122.85 133.55) + (xy 122.85 133.45) + (xy 123.35 133.45) + (xy 123.35 133.55) + (xy 123.65 133.55) + (xy 123.65 133.65) + (xy 123.75 133.65) + (xy 123.75 133.75) + (xy 123.85 133.75) + (xy 123.85 133.85) + (xy 123.95 133.85) + (xy 123.95 133.95) + (xy 124.05 133.95) + (xy 124.05 134.15) + (xy 124.15 134.15) + (xy 124.15 134.45) + (xy 124.25 134.45) + (xy 124.25 135.55) + (xy 124.15 135.55) + (xy 124.15 135.85) + (xy 124.05 135.85) + (xy 124.05 136.05) + (xy 123.95 136.05) + (xy 123.95 136.15) + (xy 123.85 136.15) + (xy 123.85 136.25) + (xy 123.75 136.25) + (xy 123.75 136.35) + (xy 123.65 136.35) + (xy 123.65 136.45) + (xy 123.35 136.45) + (xy 123.35 136.55) + (xy 123.25 136.55) + (xy 123.25 136.65) + (xy 123.15 136.65) + (xy 123.15 136.75) + (xy 123.25 136.75) + (xy 123.25 136.85) + (xy 123.35 136.85) + (xy 123.35 136.95) + (xy 124.55 136.95) + (xy 124.55 137.05) + (xy 124.65 137.05) + (xy 124.65 137.15) + (xy 124.75 137.15) + (xy 124.75 137.25) + (xy 124.85 137.25) + (xy 151.55 137.25) + (xy 151.55 136.55) + (xy 151.65 136.55) + (xy 151.65 136.45) + (xy 151.75 136.45) + (xy 151.75 136.35) + (xy 151.85 136.35) + (xy 151.85 136.25) + (xy 152.25 136.25) + (xy 152.25 136.15) + (xy 152.35 136.15) + (xy 152.35 136.05) + (xy 152.45 136.05) + (xy 152.45 135.95) + (xy 152.55 135.95) + (xy 152.55 135.75) + (xy 152.45 135.75) + (xy 152.45 135.65) + (xy 152.35 135.65) + (xy 152.35 135.55) + (xy 152.25 135.55) + (xy 152.25 134.85) + (xy 152.35 134.85) + (xy 152.35 134.75) + (xy 152.45 134.75) + (xy 152.45 133.85) + (xy 152.35 133.85) + (xy 152.35 133.75) + (xy 152.25 133.75) + (xy 152.25 133.65) + (xy 151.55 133.65) + (xy 151.55 133.55) + (xy 151.45 133.55) + (xy 151.45 133.45) + (xy 151.35 133.45) + (xy 151.35 133.35) + (xy 151.25 133.35) + (xy 151.25 133.15) + (xy 151.15 133.15) + (xy 151.15 133.05) + (xy 151.05 133.05) + (xy 151.05 132.95) + (xy 150.95 132.95) + (xy 150.95 132.85) + (xy 150.85 132.85) + (xy 150.85 132.75) + (xy 150.75 132.75) + (xy 150.75 132.65) + (xy 150.65 132.65) + (xy 150.65 132.55) + (xy 150.55 132.55) + (xy 150.55 132.45) + (xy 150.45 132.45) + (xy 150.45 132.35) + (xy 150.35 132.35) + (xy 150.35 132.25) + (xy 150.25 132.25) + (xy 150.25 132.15) + (xy 150.15 132.15) + (xy 150.15 132.05) + (xy 150.05 132.05) + (xy 150.05 131.95) + (xy 149.95 131.95) + (xy 149.95 131.85) + (xy 149.75 131.85) + (xy 149.75 131.75) + (xy 149.65 131.75) + (xy 149.65 131.65) + (xy 149.55 131.65) + (xy 149.55 131.55) + (xy 149.45 131.55) + (xy 149.45 131.65) + (xy 149.35 131.65) + (xy 149.35 131.75) + (xy 149.25 131.75) + (xy 149.25 132.55) + (xy 149.35 132.55) + (xy 149.35 132.65) + (xy 149.45 132.65) + (xy 149.45 133.35) + (xy 149.35 133.35) + (xy 149.35 133.45) + (xy 149.25 133.45) + (xy 149.25 133.55) + (xy 149.15 133.55) + (xy 149.15 133.65) + (xy 148.45 133.65) + (xy 148.45 133.55) + (xy 148.35 133.55) + (xy 148.35 133.45) + (xy 148.25 133.45) + (xy 148.25 133.35) + (xy 148.15 133.35) + (xy 148.15 132.65) + (xy 148.25 132.65) + (xy 148.25 132.55) + (xy 148.35 132.55) + (xy 148.35 131.55) + (xy 148.25 131.55) + (xy 148.25 131.45) + (xy 148.15 131.45) + (xy 148.15 131.05) + (xy 148.05 131.05) + (xy 148.05 130.95) + (xy 147.95 130.95) + (xy 147.95 130.85) + (xy 147.85 130.85) + (xy 147.85 130.75) + (xy 147.75 130.75) + (xy 147.75 130.65) + (xy 147.65 130.65) + (xy 147.65 130.55) + (xy 147.55 130.55) + (xy 147.55 130.45) + (xy 147.45 130.45) + (xy 147.45 130.35) + (xy 147.35 130.35) + (xy 147.35 130.25) + (xy 147.25 130.25) + (xy 147.25 130.15) + (xy 147.15 130.15) + (xy 147.15 130.05) + (xy 147.05 130.05) + (xy 147.05 129.95) + (xy 146.95 129.95) + (xy 146.95 129.85) + (xy 146.85 129.85) + (xy 146.85 129.75) + (xy 146.75 129.75) + (xy 146.75 129.65) + (xy 146.65 129.65) + (xy 146.65 129.55) + (xy 146.55 129.55) + (xy 146.55 129.45) + (xy 146.45 129.45) + (xy 146.45 129.35) + (xy 146.35 129.35) + (xy 146.35 129.25) + (xy 146.25 129.25) + (xy 146.25 129.15) + (xy 146.15 129.15) + (xy 146.15 129.05) + (xy 146.05 129.05) + (xy 146.05 128.95) + (xy 145.95 128.95) + (xy 145.95 128.85) + (xy 145.85 128.85) + (xy 145.85 128.75) + (xy 145.75 128.75) + (xy 145.75 128.65) + (xy 145.35 128.65) + (xy 145.35 128.55) + (xy 145.25 128.55) + (xy 145.25 128.45) + (xy 145.15 128.45) + (xy 145.15 128.35) + (xy 145.05 128.35) + (xy 145.05 127.65) + (xy 145.15 127.65) + (xy 145.15 127.55) + (xy 145.25 127.55) + (xy 145.25 127.45) + (xy 145.35 127.45) + (xy 145.35 127.35) + (xy 146.05 127.35) + (xy 146.05 127.45) + (xy 146.15 127.45) + (xy 146.15 127.55) + (xy 146.25 127.55) + (xy 146.25 127.65) + (xy 146.35 127.65) + (xy 146.35 128.05) + (xy 146.45 128.05) + (xy 146.45 128.15) + (xy 146.55 128.15) + (xy 146.55 128.25) + (xy 146.65 128.25) + (xy 146.65 128.35) + (xy 146.75 128.35) + (xy 146.75 128.45) + (xy 146.85 128.45) + (xy 146.85 128.55) + (xy 146.95 128.55) + (xy 146.95 128.65) + (xy 147.05 128.65) + (xy 147.05 128.75) + (xy 147.15 128.75) + (xy 147.15 128.85) + (xy 147.25 128.85) + (xy 147.25 128.95) + (xy 147.35 128.95) + (xy 147.35 129.05) + (xy 147.45 129.05) + (xy 147.45 129.15) + (xy 147.55 129.15) + (xy 147.55 129.25) + (xy 147.65 129.25) + (xy 147.65 129.35) + (xy 147.75 129.35) + (xy 147.75 129.45) + (xy 147.85 129.45) + (xy 147.85 129.55) + (xy 147.95 129.55) + (xy 147.95 129.65) + (xy 148.05 129.65) + (xy 148.05 129.75) + (xy 148.15 129.75) + (xy 148.15 129.85) + (xy 148.25 129.85) + (xy 148.25 129.95) + (xy 148.35 129.95) + (xy 148.35 130.05) + (xy 148.45 130.05) + (xy 148.45 130.15) + (xy 148.55 130.15) + (xy 148.55 130.25) + (xy 148.65 130.25) + (xy 148.65 130.35) + (xy 148.75 130.35) + (xy 148.75 130.45) + (xy 149.15 130.45) + (xy 149.15 130.55) + (xy 149.25 130.55) + (xy 149.25 130.65) + (xy 149.35 130.65) + (xy 149.35 130.75) + (xy 149.45 130.75) + (xy 149.45 130.85) + (xy 149.55 130.85) + (xy 149.55 130.75) + (xy 149.65 130.75) + (xy 149.65 130.65) + (xy 149.75 130.65) + (xy 149.75 130.55) + (xy 150.45 130.55) + (xy 150.45 130.65) + (xy 150.55 130.65) + (xy 150.55 130.75) + (xy 150.65 130.75) + (xy 150.65 130.85) + (xy 150.75 130.85) + (xy 150.75 131.05) + (xy 150.85 131.05) + (xy 150.85 131.15) + (xy 150.95 131.15) + (xy 150.95 131.25) + (xy 151.05 131.25) + (xy 151.05 131.35) + (xy 151.15 131.35) + (xy 151.15 131.45) + (xy 151.25 131.45) + (xy 151.25 131.55) + (xy 151.35 131.55) + (xy 151.35 131.65) + (xy 151.45 131.65) + (xy 151.45 131.75) + (xy 151.55 131.75) + (xy 151.55 131.85) + (xy 151.65 131.85) + (xy 151.65 131.95) + (xy 151.75 131.95) + (xy 151.75 132.05) + (xy 151.85 132.05) + (xy 151.85 132.15) + (xy 151.95 132.15) + (xy 151.95 132.25) + (xy 152.05 132.25) + (xy 152.05 132.35) + (xy 152.25 132.35) + (xy 152.25 132.25) + (xy 152.35 132.25) + (xy 152.35 132.15) + (xy 152.45 132.15) + (xy 152.45 118.35) + (xy 152.55 118.35) + (xy 152.55 118.25) + (xy 152.65 118.25) + (xy 152.65 118.15) + (xy 152.75 118.15) + (xy 152.75 118.05) + (xy 152.85 118.05) + (xy 152.85 117.95) + (xy 152.95 117.95) + (xy 152.95 117.85) + (xy 153.05 117.85) + (xy 153.05 117.75) + (xy 153.15 117.75) + (xy 153.15 117.65) + (xy 153.25 117.65) + (xy 153.25 117.55) + (xy 153.35 117.55) + (xy 153.35 117.45) + (xy 153.45 117.45) + (xy 153.45 117.35) + (xy 153.55 117.35) + (xy 153.55 117.25) + (xy 153.65 117.25) + (xy 153.65 117.15) + (xy 153.75 117.15) + (xy 153.75 117.05) + (xy 153.85 117.05) + (xy 153.85 116.95) + (xy 153.95 116.95) + (xy 153.95 116.85) + (xy 154.05 116.85) + (xy 154.05 116.75) + (xy 154.15 116.75) + (xy 154.15 116.65) + (xy 154.25 116.65) + (xy 154.25 116.55) + (xy 154.35 116.55) + (xy 154.35 116.45) + (xy 154.45 116.45) + (xy 154.45 116.35) + (xy 154.55 116.35) + (xy 154.55 116.25) + (xy 154.65 116.25) + (xy 154.65 116.15) + (xy 154.75 116.15) + (xy 154.75 116.05) + (xy 154.85 116.05) + (xy 154.85 115.95) + (xy 154.95 115.95) + (xy 154.95 115.85) + (xy 155.05 115.85) + (xy 155.05 115.75) + (xy 155.15 115.75) + (xy 155.15 115.65) + (xy 155.25 115.65) + (xy 155.25 115.55) + (xy 155.35 115.55) + (xy 155.35 115.45) + (xy 155.45 115.45) + (xy 155.45 115.35) + (xy 155.55 115.35) + (xy 155.55 115.15) + (xy 155.45 115.15) + (xy 155.45 115.05) + (xy 155.35 115.05) + (xy 155.35 114.95) + (xy 155.25 114.95) + (xy 155.25 115.05) + (xy 155.15 115.05) + (xy 155.15 115.15) + (xy 155.05 115.15) + (xy 155.05 115.25) + (xy 154.95 115.25) + (xy 154.95 115.35) + (xy 154.85 115.35) + (xy 154.85 115.45) + (xy 154.75 115.45) + (xy 154.75 115.55) + (xy 154.65 115.55) + (xy 154.65 115.65) + (xy 154.45 115.65) + (xy 154.45 115.75) + (xy 153.55 115.75) + (xy 153.55 115.65) + (xy 153.35 115.65) + (xy 153.35 115.55) + (xy 153.25 115.55) + (xy 153.25 115.45) + (xy 153.15 115.45) + (xy 153.15 115.35) + (xy 153.05 115.35) + (xy 153.05 115.15) + (xy 152.95 115.15) + (xy 152.95 115.05) + (xy 152.85 115.05) + (xy 152.85 114.95) + (xy 152.65 114.95) + (xy 152.65 115.05) + (xy 152.55 115.05) + (xy 152.55 115.15) + (xy 152.45 115.15) + (xy 152.45 115.35) + (xy 152.35 115.35) + (xy 152.35 115.45) + (xy 152.25 115.45) + (xy 152.25 115.55) + (xy 152.15 115.55) + (xy 152.15 115.65) + (xy 151.95 115.65) + (xy 151.95 115.75) + (xy 151.05 115.75) + (xy 151.05 115.65) + (xy 150.85 115.65) + (xy 150.85 115.55) + (xy 150.75 115.55) + (xy 150.75 115.45) + (xy 150.65 115.45) + (xy 150.65 115.35) + (xy 150.55 115.35) + (xy 150.55 115.25) + (xy 150.45 115.25) + (xy 150.45 115.15) + (xy 150.35 115.15) + (xy 150.35 115.05) + (xy 150.25 115.05) + (xy 150.25 114.95) + (xy 150.15 114.95) + (xy 150.15 115.05) + (xy 150.05 115.05) + (xy 150.05 115.15) + (xy 149.95 115.15) + (xy 149.95 115.25) + (xy 149.85 115.25) + (xy 149.85 115.45) + (xy 149.75 115.45) + (xy 149.75 115.55) + (xy 149.55 115.55) + (xy 149.55 115.65) + (xy 149.35 115.65) + (xy 149.35 115.75) + (xy 148.55 115.75) + (xy 148.55 115.65) + (xy 148.35 115.65) + (xy 148.35 115.55) + (xy 148.15 115.55) + (xy 148.15 115.45) + (xy 148.05 115.45) + (xy 148.05 115.35) + (xy 147.95 115.35) + (xy 147.95 115.15) + (xy 147.85 115.15) + (xy 147.85 115.05) + (xy 147.75 115.05) + (xy 147.75 114.95) + (xy 147.65 114.95) + (xy 147.65 115.05) + (xy 147.55 115.05) + (xy 147.55 115.15) + (xy 147.45 115.15) + (xy 147.45 115.25) + (xy 147.35 115.25) + (xy 147.35 115.35) + (xy 147.25 115.35) + (xy 147.25 115.45) + (xy 147.15 115.45) + (xy 147.15 115.55) + (xy 147.05 115.55) + (xy 147.05 115.65) + (xy 146.85 115.65) + (xy 146.85 115.75) + (xy 145.95 115.75) + (xy 145.95 115.65) + (xy 145.75 115.65) + (xy 145.75 115.55) + (xy 145.65 115.55) + (xy 145.65 115.45) + (xy 145.55 115.45) + (xy 145.55 115.35) + (xy 145.45 115.35) + (xy 145.45 115.25) + (xy 145.35 115.25) + (xy 145.35 115.15) + (xy 145.25 115.15) + (xy 145.25 115.05) + (xy 145.15 115.05) + (xy 145.15 114.95) + (xy 145.05 114.95) + (xy 145.05 115.05) + (xy 144.95 115.05) + (xy 144.95 115.15) + (xy 144.85 115.15) + (xy 144.85 115.35) + (xy 144.75 115.35) + (xy 144.75 115.45) + (xy 144.65 115.45) + (xy 144.65 115.55) + (xy 144.45 115.55) + (xy 144.45 115.65) + (xy 144.25 115.65) + (xy 144.25 115.75) + (xy 143.45 115.75) + (xy 143.45 115.65) + (xy 143.25 115.65) + (xy 143.25 115.55) + (xy 143.05 115.55) + (xy 143.05 115.45) + (xy 142.95 115.45) + (xy 142.95 115.25) + (xy 142.85 115.25) + (xy 142.85 115.15) + (xy 142.75 115.15) + (xy 142.75 115.05) + (xy 142.65 115.05) + (xy 142.65 114.95) + (xy 142.55 114.95) + (xy 142.55 115.05) + (xy 142.45 115.05) + (xy 142.45 115.15) + (xy 142.35 115.15) + (xy 142.35 115.25) + (xy 142.25 115.25) + (xy 142.25 115.35) + (xy 142.15 115.35) + (xy 142.15 115.45) + (xy 142.05 115.45) + (xy 142.05 115.55) + (xy 141.95 115.55) + (xy 141.95 115.65) + (xy 141.75 115.65) + (xy 141.75 115.75) + (xy 140.85 115.75) + (xy 140.85 115.65) + (xy 140.65 115.65) + (xy 140.65 115.55) + (xy 140.55 115.55) + (xy 140.55 115.45) + (xy 140.45 115.45) + (xy 140.45 115.35) + (xy 140.35 115.35) + (xy 140.35 115.15) + (xy 140.25 115.15) + (xy 140.25 114.95) + (xy 140.15 114.95) + (xy 140.15 114.45) + (xy 140.05 114.45) + (xy 140.05 114.35) + (xy 139.95 114.35) + (xy 139.95 114.25) + (xy 139.85 114.25) + (xy 139.85 114.15) + (xy 139.75 114.15) + (xy 139.75 114.05) + (xy 139.65 114.05) + (xy 139.65 113.95) + (xy 139.55 113.95) + (xy 139.55 113.85) + (xy 139.35 113.85) + (xy 139.35 113.95) + (xy 139.25 113.95) + (xy 139.25 114.05) + (xy 139.15 114.05) + (xy 139.15 114.15) + (xy 139.25 114.15) + (xy 139.25 115.05) + (xy 139.15 115.05) + (xy 139.15 115.25) + (xy 139.05 115.25) + (xy 139.05 115.35) + (xy 138.95 115.35) + (xy 138.95 115.45) + (xy 138.85 115.45) + (xy 138.85 115.55) + (xy 138.75 115.55) + (xy 138.75 115.65) + (xy 138.55 115.65) + (xy 138.55 115.75) + (xy 137.65 115.75) + (xy 137.65 115.65) + (xy 137.45 115.65) + (xy 137.45 115.55) + (xy 137.35 115.55) + (xy 137.35 115.45) + (xy 137.25 115.45) + (xy 137.25 115.35) + (xy 137.15 115.35) + (xy 137.15 115.25) + (xy 137.05 115.25) + (xy 137.05 115.15) + (xy 136.95 115.15) + (xy 136.95 115.05) + (xy 136.85 115.05) + (xy 136.85 114.95) + (xy 136.75 114.95) + (xy 136.75 115.05) + (xy 136.65 115.05) + (xy 136.65 115.15) + (xy 136.55 115.15) + (xy 136.55 115.35) + (xy 136.45 115.35) + (xy 136.45 115.45) + (xy 136.35 115.45) + (xy 136.35 115.55) + (xy 136.15 115.55) + (xy 136.15 115.65) + (xy 135.95 115.65) + (xy 135.95 115.75) + (xy 135.75 115.75) + (xy 135.75 115.85) + (xy 135.65 115.85) + (xy 135.65 115.95) + (xy 135.55 115.95) + (xy 135.55 129.65) + (xy 135.65 129.65) + (xy 135.65 129.75) + (xy 135.75 129.75) + (xy 135.75 129.85) + (xy 136.15 129.85) + (xy 136.15 129.95) + (xy 136.25 129.95) + (xy 136.25 130.05) + (xy 136.35 130.05) + (xy 136.35 130.15) + (xy 136.45 130.15) + (xy 136.45 130.85) + (xy 136.35 130.85) + (xy 136.35 130.95) + (xy 136.25 130.95) + (xy 136.25 131.85) + (xy 136.35 131.85) + (xy 136.35 131.95) + (xy 136.45 131.95) + (xy 136.45 132.25) + (xy 136.55 132.25) + (xy 136.55 132.35) + (xy 136.65 132.35) + (xy 136.65 132.45) + (xy 136.75 132.45) + (xy 136.75 132.35) + (xy 136.85 132.35) + (xy 136.85 132.25) + (xy 136.95 132.25) + (xy 136.95 132.15) + (xy 137.05 132.15) + (xy 137.05 132.05) + (xy 137.15 132.05) + (xy 137.15 131.95) + (xy 137.25 131.95) + (xy 137.25 131.85) + (xy 137.35 131.85) + (xy 137.35 131.75) + (xy 137.45 131.75) + (xy 137.45 131.65) + (xy 137.55 131.65) + (xy 137.55 131.55) + (xy 137.65 131.55) + (xy 137.65 131.45) + (xy 137.75 131.45) + (xy 137.75 131.35) + (xy 137.85 131.35) + (xy 137.85 131.25) + (xy 137.95 131.25) + (xy 137.95 131.15) + (xy 138.05 131.15) + (xy 138.05 131.05) + (xy 138.15 131.05) + (xy 138.15 130.95) + (xy 138.25 130.95) + (xy 138.25 130.85) + (xy 138.35 130.85) + (xy 138.35 130.75) + (xy 138.45 130.75) + (xy 138.45 130.65) + (xy 138.55 130.65) + (xy 138.55 130.55) + (xy 138.65 130.55) + (xy 138.65 130.45) + (xy 138.75 130.45) + (xy 138.75 130.35) + (xy 138.85 130.35) + (xy 138.85 130.25) + (xy 138.95 130.25) + (xy 138.95 130.15) + (xy 139.05 130.15) + (xy 139.05 130.05) + (xy 139.15 130.05) + (xy 139.15 129.95) + (xy 139.25 129.95) + (xy 139.25 129.85) + (xy 139.35 129.85) + (xy 139.35 129.25) + (xy 139.45 129.25) + (xy 139.45 129.15) + (xy 139.55 129.15) + (xy 139.55 129.05) + (xy 139.65 129.05) + (xy 139.65 128.95) + (xy 140.35 128.95) + (xy 140.35 129.05) + (xy 140.45 129.05) + (xy 140.45 129.15) + (xy 140.55 129.15) + (xy 140.55 129.25) + (xy 140.65 129.25) + (xy 140.65 129.65) + (xy 140.75 129.65) + (xy 140.75 129.75) + (xy 140.85 129.75) + (xy 140.85 129.85) + (xy 140.95 129.85) + (xy 140.95 129.95) + (xy 141.05 129.95) + (xy 141.05 131.75) + (xy 140.95 131.75) + (xy 140.95 131.85) + (xy 140.85 131.85) + (xy 140.85 131.95) + (xy 140.75 131.95) + (xy 140.75 132.05) + (xy 140.65 132.05) + (xy 140.65 132.15) + (xy 140.55 132.15) + (xy 140.55 132.25) + (xy 140.45 132.25) + (xy 140.45 132.65) + (xy 140.35 132.65) + (xy 140.35 132.75) + (xy 140.25 132.75) + (xy 140.25 132.85) + (xy 140.15 132.85) + (xy 140.15 132.95) + (xy 139.45 132.95) + (xy 139.45 132.85) + (xy 139.35 132.85) + (xy 139.35 132.75) + (xy 139.25 132.75) + (xy 139.25 132.65) + (xy 139.15 132.65) + (xy 139.15 132.15) + (xy 139.05 132.15) + (xy 139.05 132.05) + (xy 138.95 132.05) + (xy 138.95 131.95) + (xy 138.85 131.95) + (xy 138.85 132.05) + (xy 138.75 132.05) + (xy 138.75 132.15) + (xy 138.65 132.15) + (xy 138.65 132.25) + (xy 138.55 132.25) + (xy 138.55 132.35) + (xy 138.45 132.35) + (xy 138.45 132.45) + (xy 138.35 132.45) + (xy 138.35 132.55) + (xy 138.25 132.55) + (xy 138.25 132.65) + (xy 138.15 132.65) + (xy 138.15 132.75) + (xy 138.05 132.75) + (xy 138.05 132.85) + (xy 137.95 132.85) + (xy 137.95 132.95) + (xy 137.85 132.95) + (xy 137.85 133.05) + (xy 137.75 133.05) + (xy 137.75 133.15) + (xy 137.65 133.15) + (xy 137.65 133.25) + (xy 137.55 133.25) + (xy 137.55 133.35) + (xy 137.45 133.35) + (xy 137.45 133.45) + (xy 137.35 133.45) + (xy 137.35 133.55) + (xy 137.25 133.55) + (xy 137.25 133.65) + (xy 137.15 133.65) + (xy 137.15 133.85) + (xy 137.05 133.85) + (xy 137.05 133.95) + (xy 136.95 133.95) + (xy 136.95 134.05) + (xy 136.85 134.05) + (xy 136.85 134.15) + (xy 136.15 134.15) + (xy 136.15 134.05) + (xy 136.05 134.05) + (xy 136.05 133.95) + (xy 135.95 133.95) + (xy 135.95 134.05) + (xy 135.85 134.05) + (xy 135.85 134.15) + (xy 135.75 134.15) + (xy 135.75 134.65) + (xy 135.65 134.65) + (xy 135.65 134.75) + (xy 135.55 134.75) + (xy 135.55 134.85) + (xy 135.45 134.85) + (xy 135.45 135.05) + (xy 135.55 135.05) + (xy 135.55 135.15) + (xy 135.65 135.15) + (xy 135.65 135.25) + (xy 135.75 135.25) + (xy 135.75 135.35) + (xy 135.85 135.35) + (xy 135.85 135.45) + (xy 135.95 135.45) + (xy 135.95 135.55) + (xy 136.05 135.55) + (xy 136.05 135.65) + (xy 136.45 135.65) + (xy 136.45 135.75) + (xy 136.55 135.75) + (xy 136.55 135.85) + (xy 136.65 135.85) + (xy 136.65 135.95) + (xy 136.75 135.95) + (xy 136.75 136.65) + (xy 136.65 136.65) + (xy 136.65 136.75) + (xy 136.55 136.75) + (xy 136.55 136.85) + (xy 136.45 136.85) + (xy 136.45 136.95) + (xy 135.75 136.95) + (xy 135.75 136.85) + (xy 135.65 136.85) + (xy 135.65 136.75) + (xy 135.55 136.75) + (xy 135.55 136.65) + (xy 135.45 136.65) + (xy 135.45 136.25) + (xy 135.35 136.25) + (xy 135.35 136.15) + (xy 135.25 136.15) + (xy 135.25 136.05) + (xy 135.15 136.05) + (xy 135.15 135.95) + (xy 135.05 135.95) + (xy 135.05 135.85) + (xy 134.95 135.85) + (xy 134.95 135.75) + (xy 134.85 135.75) + (xy 134.85 135.65) + (xy 134.75 135.65) + (xy 134.75 135.55) + (xy 134.65 135.55) + (xy 134.65 135.45) + (xy 134.55 135.45) + (xy 134.55 135.35) + (xy 134.45 135.35) + (xy 134.45 135.25) + (xy 134.35 135.25) + (xy 134.35 135.15) + (xy 134.25 135.15) + (xy 134.25 135.05) + (xy 134.15 135.05) + (xy 134.15 134.95) + (xy 134.05 134.95) + (xy 134.05 134.85) + (xy 133.95 134.85) + (xy 133.95 129.25) + (xy 107.45 129.25) + (xy 107.45 129.75) + (xy 107.35 129.75) + (xy 107.35 130.05) + (xy 107.25 130.05) + (xy 107.25 130.25) + (xy 107.15 130.25) + (xy 107.15 130.35) + (xy 107.05 130.35) + (xy 107.05 130.55) + (xy 106.85 130.55) + (xy 106.85 130.65) + (xy 106.75 130.65) + (xy 106.75 130.75) + (xy 106.55 130.75) + (xy 106.55 130.85) + (xy 104.05 130.85) + (xy 104.05 130.75) + (xy 103.85 130.75) + (xy 103.85 130.65) + (xy 103.75 130.65) + (xy 103.75 130.55) + (xy 103.55 130.55) + (xy 103.55 130.35) + (xy 103.45 130.35) + (xy 103.45 130.25) + (xy 103.35 130.25) + (xy 103.35 130.05) + (xy 103.25 130.05) + (xy 103.25 129.75) + (xy 103.15 129.75) + (xy 103.15 129.25) + (xy 103.25 129.25) + (xy 103.25 128.95) + (xy 103.35 128.95) + (xy 103.35 128.75) + (xy 103.45 128.75) + (xy 103.45 128.65) + (xy 103.55 128.65) + (xy 103.55 128.45) + (xy 103.75 128.45) + (xy 103.75 128.35) + (xy 103.85 128.35) + (xy 103.85 128.25) + (xy 104.05 128.25) + (xy 104.05 128.15) + (xy 106.55 128.15) + (xy 106.55 128.25) + (xy 106.75 128.25) + (xy 106.75 128.35) + (xy 106.85 128.35) + (xy 106.85 128.45) + (xy 107.05 128.45) + (xy 107.05 128.65) + (xy 107.15 128.65) + (xy 107.15 128.75) + (xy 107.25 128.75) + (xy 107.25 128.95) + (xy 107.35 128.95) + (xy 107.35 129.25) + (xy 107.45 129.25) + (xy 133.95 129.25) + (xy 133.95 122.75) + (xy 113.65 122.75) + (xy 113.65 127.25) + (xy 113.55 127.25) + (xy 113.55 127.35) + (xy 111.05 127.35) + (xy 111.05 127.25) + (xy 110.95 127.25) + (xy 110.95 124.55) + (xy 104.45 124.55) + (xy 104.45 125.45) + (xy 104.35 125.45) + (xy 104.35 125.65) + (xy 104.25 125.65) + (xy 104.25 125.75) + (xy 104.15 125.75) + (xy 104.15 125.85) + (xy 104.05 125.85) + (xy 104.05 125.95) + (xy 103.95 125.95) + (xy 103.95 126.05) + (xy 103.75 126.05) + (xy 103.75 126.15) + (xy 102.85 126.15) + (xy 102.85 126.05) + (xy 102.65 126.05) + (xy 102.65 125.95) + (xy 102.55 125.95) + (xy 102.55 125.85) + (xy 102.45 125.85) + (xy 102.45 125.75) + (xy 102.35 125.75) + (xy 102.35 125.65) + (xy 102.25 125.65) + (xy 102.25 125.45) + (xy 102.15 125.45) + (xy 102.15 124.55) + (xy 102.25 124.55) + (xy 102.25 124.35) + (xy 102.35 124.35) + (xy 102.35 124.25) + (xy 102.45 124.25) + (xy 102.45 124.15) + (xy 102.55 124.15) + (xy 102.55 124.05) + (xy 102.65 124.05) + (xy 102.65 123.95) + (xy 102.85 123.95) + (xy 102.85 123.85) + (xy 103.75 123.85) + (xy 103.75 123.95) + (xy 103.95 123.95) + (xy 103.95 124.05) + (xy 104.05 124.05) + (xy 104.05 124.15) + (xy 104.15 124.15) + (xy 104.15 124.25) + (xy 104.25 124.25) + (xy 104.25 124.35) + (xy 104.35 124.35) + (xy 104.35 124.55) + (xy 104.45 124.55) + (xy 110.95 124.55) + (xy 110.95 122.75) + (xy 111.05 122.75) + (xy 111.05 122.65) + (xy 113.55 122.65) + (xy 113.55 122.75) + (xy 113.65 122.75) + (xy 133.95 122.75) + (xy 133.95 120.25) + (xy 107.45 120.25) + (xy 107.45 120.75) + (xy 107.35 120.75) + (xy 107.35 121.05) + (xy 107.25 121.05) + (xy 107.25 121.25) + (xy 107.15 121.25) + (xy 107.15 121.35) + (xy 107.05 121.35) + (xy 107.05 121.55) + (xy 106.85 121.55) + (xy 106.85 121.65) + (xy 106.75 121.65) + (xy 106.75 121.75) + (xy 106.55 121.75) + (xy 106.55 121.85) + (xy 104.05 121.85) + (xy 104.05 121.75) + (xy 103.85 121.75) + (xy 103.85 121.65) + (xy 103.75 121.65) + (xy 103.75 121.55) + (xy 103.55 121.55) + (xy 103.55 121.35) + (xy 103.45 121.35) + (xy 103.45 121.25) + (xy 103.35 121.25) + (xy 103.35 121.05) + (xy 103.25 121.05) + (xy 103.25 120.75) + (xy 103.15 120.75) + (xy 103.15 120.25) + (xy 103.25 120.25) + (xy 103.25 119.95) + (xy 103.35 119.95) + (xy 103.35 119.75) + (xy 103.45 119.75) + (xy 103.45 119.65) + (xy 103.55 119.65) + (xy 103.55 119.45) + (xy 103.75 119.45) + (xy 103.75 119.35) + (xy 103.85 119.35) + (xy 103.85 119.25) + (xy 104.05 119.25) + (xy 104.05 119.15) + (xy 106.55 119.15) + (xy 106.55 119.25) + (xy 106.75 119.25) + (xy 106.75 119.35) + (xy 106.85 119.35) + (xy 106.85 119.45) + (xy 107.05 119.45) + (xy 107.05 119.65) + (xy 107.15 119.65) + (xy 107.15 119.75) + (xy 107.25 119.75) + (xy 107.25 119.95) + (xy 107.35 119.95) + (xy 107.35 120.25) + (xy 107.45 120.25) + (xy 133.95 120.25) + (xy 133.95 118.45) + (xy 133.85 118.45) + (xy 133.85 118.35) + (xy 133.75 118.35) + (xy 133.75 117.65) + (xy 133.85 117.65) + (xy 133.85 117.55) + (xy 133.95 117.55) + (xy 133.95 117.45) + (xy 134.05 117.45) + (xy 134.05 117.35) + (xy 134.45 117.35) + (xy 134.45 117.25) + (xy 134.55 117.25) + (xy 134.55 117.15) + (xy 134.65 117.15) + (xy 134.65 115.25) + (xy 134.55 115.25) + (xy 134.55 115.15) + (xy 134.45 115.15) + (xy 134.45 115.05) + (xy 134.35 115.05) + (xy 134.35 114.95) + (xy 134.25 114.95) + (xy 134.25 115.05) + (xy 134.15 115.05) + (xy 134.15 115.15) + (xy 134.05 115.15) + (xy 134.05 115.25) + (xy 133.95 115.25) + (xy 133.95 115.35) + (xy 133.85 115.35) + (xy 133.85 115.45) + (xy 133.75 115.45) + (xy 133.75 115.55) + (xy 133.65 115.55) + (xy 133.65 115.65) + (xy 133.45 115.65) + (xy 133.45 115.75) + (xy 132.55 115.75) + (xy 132.55 115.65) + (xy 132.35 115.65) + (xy 132.35 115.55) + (xy 132.25 115.55) + (xy 132.25 115.45) + (xy 132.15 115.45) + (xy 132.15 115.35) + (xy 132.05 115.35) + (xy 132.05 115.15) + (xy 131.95 115.15) + (xy 131.95 115.05) + (xy 131.85 115.05) + (xy 131.85 114.95) + (xy 131.65 114.95) + (xy 131.65 115.05) + (xy 131.55 115.05) + (xy 131.55 115.15) + (xy 131.45 115.15) + (xy 131.45 115.35) + (xy 131.35 115.35) + (xy 131.35 115.45) + (xy 131.25 115.45) + (xy 131.25 115.55) + (xy 131.15 115.55) + (xy 131.15 115.65) + (xy 130.95 115.65) + (xy 130.95 115.75) + (xy 130.05 115.75) + (xy 130.05 115.65) + (xy 129.85 115.65) + (xy 129.85 115.55) + (xy 129.75 115.55) + (xy 129.75 115.45) + (xy 129.65 115.45) + (xy 129.65 115.35) + (xy 129.55 115.35) + (xy 129.55 115.25) + (xy 129.45 115.25) + (xy 129.45 115.15) + (xy 129.35 115.15) + (xy 129.35 115.05) + (xy 129.25 115.05) + (xy 129.25 114.95) + (xy 129.15 114.95) + (xy 129.15 115.05) + (xy 129.05 115.05) + (xy 129.05 115.15) + (xy 128.95 115.15) + (xy 128.95 115.25) + (xy 128.85 115.25) + (xy 128.85 115.45) + (xy 128.75 115.45) + (xy 128.75 115.55) + (xy 128.55 115.55) + (xy 128.55 115.65) + (xy 128.35 115.65) + (xy 128.35 115.75) + (xy 127.55 115.75) + (xy 127.55 115.65) + (xy 127.35 115.65) + (xy 127.35 115.55) + (xy 127.15 115.55) + (xy 127.15 115.45) + (xy 127.05 115.45) + (xy 127.05 115.35) + (xy 126.95 115.35) + (xy 126.95 115.15) + (xy 126.85 115.15) + (xy 126.85 115.05) + (xy 126.75 115.05) + (xy 126.75 114.95) + (xy 126.65 114.95) + (xy 126.65 115.05) + (xy 126.55 115.05) + (xy 126.55 115.15) + (xy 126.45 115.15) + (xy 126.45 115.25) + (xy 126.35 115.25) + (xy 126.35 115.35) + (xy 126.25 115.35) + (xy 126.25 115.45) + (xy 126.15 115.45) + (xy 126.15 115.55) + (xy 126.05 115.55) + (xy 126.05 115.65) + (xy 125.85 115.65) + (xy 125.85 115.75) + (xy 124.95 115.75) + (xy 124.95 115.65) + (xy 124.75 115.65) + (xy 124.75 115.55) + (xy 124.65 115.55) + (xy 124.65 115.45) + (xy 124.55 115.45) + (xy 124.55 115.35) + (xy 124.45 115.35) + (xy 124.45 115.25) + (xy 124.35 115.25) + (xy 124.35 115.15) + (xy 124.25 115.15) + (xy 124.25 115.05) + (xy 124.15 115.05) + (xy 124.15 114.95) + (xy 124.05 114.95) + (xy 124.05 115.05) + (xy 123.95 115.05) + (xy 123.95 115.15) + (xy 123.85 115.15) + (xy 123.85 115.35) + (xy 123.75 115.35) + (xy 123.75 115.45) + (xy 123.65 115.45) + (xy 123.65 115.55) + (xy 123.45 115.55) + (xy 123.45 115.65) + (xy 123.25 115.65) + (xy 123.25 115.75) + (xy 122.45 115.75) + (xy 122.45 115.65) + (xy 122.25 115.65) + (xy 122.25 115.55) + (xy 122.05 115.55) + (xy 122.05 115.45) + (xy 121.95 115.45) + (xy 121.95 115.25) + (xy 121.85 115.25) + (xy 121.85 115.15) + (xy 121.75 115.15) + (xy 121.75 115.05) + (xy 121.65 115.05) + (xy 121.65 114.95) + (xy 121.55 114.95) + (xy 121.55 115.05) + (xy 121.45 115.05) + (xy 121.45 115.15) + (xy 121.35 115.15) + (xy 121.35 115.25) + (xy 121.25 115.25) + (xy 121.25 115.35) + (xy 121.15 115.35) + (xy 121.15 115.45) + (xy 121.05 115.45) + (xy 121.05 115.55) + (xy 120.95 115.55) + (xy 120.95 115.65) + (xy 120.75 115.65) + (xy 120.75 115.75) + (xy 119.85 115.75) + (xy 119.85 115.65) + (xy 119.65 115.65) + (xy 119.65 115.55) + (xy 119.55 115.55) + (xy 119.55 115.45) + (xy 119.45 115.45) + (xy 119.45 115.35) + (xy 119.35 115.35) + (xy 119.35 115.15) + (xy 119.25 115.15) + (xy 119.25 114.95) + (xy 119.15 114.95) + (xy 119.15 114.25) + (xy 119.25 114.25) + (xy 119.25 114.05) + (xy 119.35 114.05) + (xy 119.35 113.85) + (xy 119.45 113.85) + (xy 119.45 113.75) + (xy 119.55 113.75) + (xy 119.55 113.65) + (xy 119.65 113.65) + (xy 119.65 113.55) + (xy 119.85 113.55) + (xy 119.85 113.45) + (xy 120.75 113.45) + (xy 120.75 113.55) + (xy 120.95 113.55) + (xy 120.95 113.65) + (xy 121.05 113.65) + (xy 121.05 113.75) + (xy 121.15 113.75) + (xy 121.15 113.85) + (xy 121.25 113.85) + (xy 121.25 113.95) + (xy 121.35 113.95) + (xy 121.35 114.05) + (xy 121.45 114.05) + (xy 121.45 114.15) + (xy 121.55 114.15) + (xy 121.55 114.25) + (xy 121.65 114.25) + (xy 121.65 114.15) + (xy 121.75 114.15) + (xy 121.75 114.05) + (xy 121.85 114.05) + (xy 121.85 113.95) + (xy 121.95 113.95) + (xy 121.95 113.75) + (xy 122.05 113.75) + (xy 122.05 113.65) + (xy 122.25 113.65) + (xy 122.25 113.55) + (xy 122.45 113.55) + (xy 122.45 113.45) + (xy 123.25 113.45) + (xy 123.25 113.55) + (xy 123.45 113.55) + (xy 123.45 113.65) + (xy 123.65 113.65) + (xy 123.65 113.75) + (xy 123.75 113.75) + (xy 123.75 113.85) + (xy 123.85 113.85) + (xy 123.85 114.05) + (xy 123.95 114.05) + (xy 123.95 114.15) + (xy 124.05 114.15) + (xy 124.05 114.25) + (xy 124.15 114.25) + (xy 124.15 114.15) + (xy 124.25 114.15) + (xy 124.25 114.05) + (xy 124.35 114.05) + (xy 124.35 113.95) + (xy 124.45 113.95) + (xy 124.45 113.85) + (xy 124.55 113.85) + (xy 124.55 113.75) + (xy 124.65 113.75) + (xy 124.65 113.65) + (xy 124.75 113.65) + (xy 124.75 113.55) + (xy 124.95 113.55) + (xy 124.95 113.45) + (xy 125.85 113.45) + (xy 125.85 113.55) + (xy 126.05 113.55) + (xy 126.05 113.65) + (xy 126.15 113.65) + (xy 126.15 113.75) + (xy 126.25 113.75) + (xy 126.25 113.85) + (xy 126.35 113.85) + (xy 126.35 113.95) + (xy 126.45 113.95) + (xy 126.45 114.05) + (xy 126.55 114.05) + (xy 126.55 114.15) + (xy 126.65 114.15) + (xy 126.65 114.25) + (xy 126.75 114.25) + (xy 126.75 114.15) + (xy 126.85 114.15) + (xy 126.85 114.05) + (xy 126.95 114.05) + (xy 126.95 113.85) + (xy 127.05 113.85) + (xy 127.05 113.75) + (xy 127.15 113.75) + (xy 127.15 113.65) + (xy 127.35 113.65) + (xy 127.35 113.55) + (xy 127.55 113.55) + (xy 127.55 113.45) + (xy 128.35 113.45) + (xy 128.35 113.55) + (xy 128.55 113.55) + (xy 128.55 113.65) + (xy 128.75 113.65) + (xy 128.75 113.75) + (xy 128.85 113.75) + (xy 128.85 113.95) + (xy 128.95 113.95) + (xy 128.95 114.05) + (xy 129.05 114.05) + (xy 129.05 114.15) + (xy 129.15 114.15) + (xy 129.15 114.25) + (xy 129.25 114.25) + (xy 129.25 114.15) + (xy 129.35 114.15) + (xy 129.35 114.05) + (xy 129.45 114.05) + (xy 129.45 113.95) + (xy 129.55 113.95) + (xy 129.55 113.85) + (xy 129.65 113.85) + (xy 129.65 113.75) + (xy 129.75 113.75) + (xy 129.75 113.65) + (xy 129.85 113.65) + (xy 129.85 113.55) + (xy 130.05 113.55) + (xy 130.05 113.45) + (xy 130.95 113.45) + (xy 130.95 113.55) + (xy 131.15 113.55) + (xy 131.15 113.65) + (xy 131.25 113.65) + (xy 131.25 113.75) + (xy 131.35 113.75) + (xy 131.35 113.85) + (xy 131.45 113.85) + (xy 131.45 113.75) + (xy 131.55 113.75) + (xy 131.55 113.65) + (xy 131.65 113.65) + (xy 131.65 113.05) + (xy 131.75 113.05) + (xy 131.75 112.95) + (xy 131.85 112.95) + (xy 131.85 112.85) + (xy 131.95 112.85) + (xy 131.95 112.75) + (xy 132.65 112.75) + (xy 132.65 112.85) + (xy 132.75 112.85) + (xy 132.75 112.95) + (xy 137.85 112.95) + (xy 137.85 112.85) + (xy 137.95 112.85) + (xy 137.95 112.75) + (xy 138.05 112.75) + (xy 138.05 112.05) + (xy 138.15 112.05) + (xy 138.15 111.95) + (xy 138.25 111.95) + (xy 138.25 111.85) + (xy 138.35 111.85) + (xy 138.35 111.75) + (xy 139.05 111.75) + (xy 139.05 111.85) + (xy 141.35 111.85) + (xy 141.35 111.95) + (xy 141.55 111.95) + (xy 141.55 112.05) + (xy 141.65 112.05) + (xy 141.65 112.15) + (xy 141.75 112.15) + (xy 141.75 112.25) + (xy 141.85 112.25) + (xy 141.85 112.35) + (xy 141.95 112.35) + (xy 141.95 112.45) + (xy 142.05 112.45) + (xy 142.05 112.55) + (xy 142.15 112.55) + (xy 142.15 112.65) + (xy 142.25 112.65) + (xy 142.25 112.75) + (xy 142.35 112.75) + (xy 142.35 112.85) + (xy 142.45 112.85) + (xy 142.45 112.95) + (xy 142.55 112.95) + (xy 142.55 113.05) + (xy 142.65 113.05) + (xy 142.65 113.15) + (xy 142.75 113.15) + (xy 142.75 113.25) + (xy 142.85 113.25) + (xy 142.85 113.35) + (xy 142.95 113.35) + (xy 142.95 113.45) + (xy 143.05 113.45) + (xy 143.05 113.55) + (xy 143.15 113.55) + (xy 143.15 113.65) + (xy 143.25 113.65) + (xy 143.25 113.55) + (xy 143.45 113.55) + (xy 143.45 113.45) + (xy 144.25 113.45) + (xy 144.25 113.55) + (xy 144.45 113.55) + (xy 144.45 113.65) + (xy 144.65 113.65) + (xy 144.65 113.75) + (xy 144.75 113.75) + (xy 144.75 113.85) + (xy 144.85 113.85) + (xy 144.85 114.05) + (xy 144.95 114.05) + (xy 144.95 114.15) + (xy 145.05 114.15) + (xy 145.05 114.25) + (xy 145.15 114.25) + (xy 145.15 114.15) + (xy 145.25 114.15) + (xy 145.25 114.05) + (xy 145.35 114.05) + (xy 145.35 113.95) + (xy 145.45 113.95) + (xy 145.45 113.85) + (xy 145.55 113.85) + (xy 145.55 113.75) + (xy 145.65 113.75) + (xy 145.65 113.65) + (xy 145.75 113.65) + (xy 145.75 113.55) + (xy 145.95 113.55) + (xy 145.95 113.45) + (xy 146.85 113.45) + (xy 146.85 113.55) + (xy 147.05 113.55) + (xy 147.05 113.65) + (xy 147.15 113.65) + (xy 147.15 113.75) + (xy 147.25 113.75) + (xy 147.25 113.85) + (xy 147.35 113.85) + (xy 147.35 113.95) + (xy 147.45 113.95) + (xy 147.45 114.05) + (xy 147.55 114.05) + (xy 147.55 114.15) + (xy 147.65 114.15) + (xy 147.65 114.25) + (xy 147.75 114.25) + (xy 147.75 114.15) + (xy 147.85 114.15) + (xy 147.85 114.05) + (xy 147.95 114.05) + (xy 147.95 113.85) + (xy 148.05 113.85) + (xy 148.05 113.75) + (xy 148.15 113.75) + (xy 148.15 113.65) + (xy 148.35 113.65) + (xy 148.35 113.55) + (xy 148.55 113.55) + (xy 148.55 113.45) + (xy 149.35 113.45) + (xy 149.35 113.55) + (xy 149.55 113.55) + (xy 149.55 113.65) + (xy 149.75 113.65) + (xy 149.75 113.75) + (xy 149.85 113.75) + (xy 149.85 113.95) + (xy 149.95 113.95) + (xy 149.95 114.05) + (xy 150.05 114.05) + (xy 150.05 114.15) + (xy 150.15 114.15) + (xy 150.15 114.25) + (xy 150.25 114.25) + (xy 150.25 114.15) + (xy 150.35 114.15) + (xy 150.35 114.05) + (xy 150.45 114.05) + (xy 150.45 113.95) + (xy 150.55 113.95) + (xy 150.55 113.85) + (xy 150.65 113.85) + (xy 150.65 113.75) + (xy 150.75 113.75) + (xy 150.75 113.65) + (xy 150.85 113.65) + (xy 150.85 113.55) + (xy 151.05 113.55) + (xy 151.05 113.45) + (xy 151.95 113.45) + (xy 151.95 113.55) + (xy 152.15 113.55) + (xy 152.15 113.65) + (xy 152.25 113.65) + (xy 152.25 113.75) + (xy 152.35 113.75) + (xy 152.35 113.85) + (xy 152.45 113.85) + (xy 152.45 114.05) + (xy 152.55 114.05) + (xy 152.55 114.15) + (xy 152.65 114.15) + (xy 152.65 114.25) + (xy 152.85 114.25) + (xy 152.85 114.15) + (xy 152.95 114.15) + (xy 152.95 114.05) + (xy 153.05 114.05) + (xy 153.05 113.85) + (xy 153.15 113.85) + (xy 153.15 113.75) + (xy 153.25 113.75) + (xy 153.25 113.65) + (xy 153.35 113.65) + (xy 153.35 113.55) + (xy 153.55 113.55) + (xy 153.55 113.45) + (xy 154.45 113.45) + (xy 154.45 113.55) + (xy 154.65 113.55) + (xy 154.65 113.65) + (xy 154.75 113.65) + (xy 154.75 113.75) + (xy 154.85 113.75) + (xy 154.85 113.85) + (xy 154.95 113.85) + (xy 154.95 113.95) + (xy 155.05 113.95) + (xy 155.05 114.05) + (xy 155.15 114.05) + (xy 155.15 114.15) + (xy 155.25 114.15) + (xy 155.25 114.25) + (xy 155.35 114.25) + (xy 155.35 114.15) + (xy 155.45 114.15) + (xy 155.45 114.05) + (xy 155.55 114.05) + (xy 155.55 113.95) + (xy 155.65 113.95) + (xy 155.65 113.75) + (xy 155.75 113.75) + (xy 155.75 113.65) + (xy 155.95 113.65) + (xy 155.95 113.55) + (xy 156.15 113.55) + (xy 156.15 113.45) + (xy 156.95 113.45) + (xy 156.95 113.55) + (xy 157.15 113.55) + (xy 157.15 113.65) + (xy 157.35 113.65) + (xy 157.35 113.75) + (xy 157.45 113.75) + (xy 157.45 113.85) + (xy 157.55 113.85) + (xy 157.55 114.05) + (xy 157.65 114.05) + (xy 157.65 114.15) + (xy 157.75 114.15) + (xy 157.75 114.25) + (xy 157.85 114.25) + (xy 157.85 114.15) + (xy 157.95 114.15) + (xy 157.95 114.05) + (xy 158.05 114.05) + (xy 158.05 113.95) + (xy 158.15 113.95) + (xy 158.15 113.85) + (xy 158.25 113.85) + (xy 158.25 113.75) + (xy 158.35 113.75) + (xy 158.35 113.65) + (xy 158.45 113.65) + (xy 158.45 113.55) + (xy 158.65 113.55) + (xy 158.65 113.45) + (xy 159.55 113.45) + (xy 159.55 113.55) + (xy 159.75 113.55) + (xy 159.75 113.65) + (xy 159.85 113.65) + (xy 159.85 113.75) + (xy 159.95 113.75) + (xy 159.95 113.85) + (xy 160.05 113.85) + (xy 160.05 113.95) + (xy 160.15 113.95) + (xy 160.15 114.15) + (xy 160.25 114.15) + (xy 160.25 115.05) + (xy 160.15 115.05) + (xy 160.15 115.25) + (xy 160.05 115.25) + (xy 160.05 115.35) + (xy 159.95 115.35) + (xy 159.95 115.45) + (xy 159.85 115.45) + (xy 159.85 115.55) + (xy 159.75 115.55) + (xy 159.75 115.65) + (xy 159.55 115.65) + (xy 159.55 115.75) + (xy 159.45 115.75) + (xy 159.45 115.85) + (xy 159.35 115.85) + (xy 159.35 115.95) + (xy 159.25 115.95) + (xy 159.25 118.95) + (xy 159.35 118.95) + (xy 159.35 119.05) + (xy 159.45 119.05) + (xy 159.45 119.15) + (xy 159.55 119.15) + (xy 159.55 119.05) + (xy 159.65 119.05) + (xy 159.65 118.95) + (xy 159.85 118.95) + (xy 159.85 118.85) + (xy 159.95 118.85) + (xy 159.95 118.75) + (xy 160.05 118.75) + (xy 160.05 118.65) + (xy 160.15 118.65) + (xy 160.15 118.55) + (xy 160.25 118.55) + (xy 160.25 118.45) + (xy 160.35 118.45) + (xy 160.35 118.35) + (xy 160.45 118.35) + (xy 160.45 118.25) + (xy 160.55 118.25) + (xy 160.55 118.15) + (xy 160.65 118.15) + (xy 160.65 118.05) + (xy 160.75 118.05) + (xy 160.75 117.95) + (xy 160.85 117.95) + (xy 160.85 117.85) + (xy 160.95 117.85) + (xy 160.95 117.75) + (xy 161.05 117.75) + (xy 161.05 117.65) + (xy 161.15 117.65) + (xy 161.15 117.55) + (xy 161.25 117.55) + (xy 161.25 117.45) + (xy 161.35 117.45) + (xy 161.35 117.35) + (xy 161.45 117.35) + (xy 161.45 117.25) + (xy 161.55 117.25) + (xy 161.55 117.15) + (xy 161.65 117.15) + (xy 161.65 117.05) + (xy 161.75 117.05) + (xy 161.75 116.95) + (xy 161.85 116.95) + (xy 161.85 116.85) + (xy 161.95 116.85) + (xy 161.95 116.75) + (xy 162.05 116.75) + (xy 162.05 116.65) + (xy 163.75 116.65) + (xy 163.75 116.55) + (xy 163.85 116.55) + (xy 163.85 116.45) + (xy 164.55 116.45) + (xy 164.55 116.55) + (xy 164.65 116.55) + (xy 164.65 116.65) + (xy 164.75 116.65) + (xy 164.75 116.75) + (xy 164.85 116.75) + (xy 164.85 117.25) + (xy 164.95 117.25) + (xy 164.95 117.35) + (xy 165.05 117.35) + (xy 165.05 117.45) + (xy 165.15 117.45) + (xy 165.15 117.55) + (xy 165.25 117.55) + (xy 165.25 117.65) + (xy 165.35 117.65) + (xy 175.15 117.65) + (xy 175.15 117.45) + (xy 175.25 117.45) + (xy 175.25 117.35) + (xy 175.35 117.35) + (xy 175.35 117.25) + (xy 177.65 117.25) + (xy 177.65 117.35) + (xy 177.75 117.35) + (xy 177.75 117.45) + (xy 177.85 117.45) + (xy 179.45 117.45) + (xy 179.45 102.35) + (xy 177.85 102.35) + (xy 177.85 104.45) + (xy 177.75 104.45) + (xy 177.75 104.55) + (xy 177.65 104.55) + (xy 177.65 104.65) + (xy 177.55 104.65) + (xy 177.55 104.75) + (xy 177.45 104.75) + (xy 177.45 104.85) + (xy 177.35 104.85) + (xy 177.35 104.95) + (xy 177.45 104.95) + (xy 177.45 105.05) + (xy 177.55 105.05) + (xy 177.55 105.15) + (xy 177.65 105.15) + (xy 177.65 105.35) + (xy 177.75 105.35) + (xy 177.75 105.55) + (xy 177.85 105.55) + (xy 177.85 106.25) + (xy 177.75 106.25) + (xy 177.75 106.45) + (xy 177.65 106.45) + (xy 177.65 106.65) + (xy 177.55 106.65) + (xy 177.55 106.75) + (xy 177.45 106.75) + (xy 177.45 106.85) + (xy 177.35 106.85) + (xy 177.35 106.95) + (xy 177.25 106.95) + (xy 177.25 107.05) + (xy 177.15 107.05) + (xy 177.15 107.25) + (xy 177.25 107.25) + (xy 177.25 107.35) + (xy 177.35 107.35) + (xy 177.35 107.45) + (xy 177.45 107.45) + (xy 177.45 107.55) + (xy 177.55 107.55) + (xy 177.55 107.65) + (xy 177.65 107.65) + (xy 177.65 107.85) + (xy 177.75 107.85) + (xy 177.75 108.05) + (xy 177.85 108.05) + (xy 177.85 108.75) + (xy 177.75 108.75) + (xy 177.75 108.95) + (xy 177.65 108.95) + (xy 177.65 109.15) + (xy 177.55 109.15) + (xy 177.55 109.25) + (xy 177.45 109.25) + (xy 177.45 109.35) + (xy 177.35 109.35) + (xy 177.35 109.45) + (xy 177.25 109.45) + (xy 177.25 109.55) + (xy 177.15 109.55) + (xy 177.15 109.75) + (xy 177.25 109.75) + (xy 177.25 109.85) + (xy 177.35 109.85) + (xy 177.35 109.95) + (xy 177.45 109.95) + (xy 177.45 110.05) + (xy 177.55 110.05) + (xy 177.55 110.15) + (xy 177.65 110.15) + (xy 177.65 110.35) + (xy 177.75 110.35) + (xy 177.75 110.55) + (xy 177.85 110.55) + (xy 177.85 111.25) + (xy 177.75 111.25) + (xy 177.75 111.45) + (xy 177.65 111.45) + (xy 177.65 111.65) + (xy 177.55 111.65) + (xy 177.55 111.75) + (xy 177.45 111.75) + (xy 177.45 111.85) + (xy 177.35 111.85) + (xy 177.35 111.95) + (xy 177.15 111.95) + (xy 177.15 112.05) + (xy 176.85 112.05) + (xy 176.85 112.15) + (xy 176.15 112.15) + (xy 176.15 112.05) + (xy 175.85 112.05) + (xy 175.85 111.95) + (xy 175.65 111.95) + (xy 175.65 111.85) + (xy 175.55 111.85) + (xy 175.55 111.75) + (xy 175.45 111.75) + (xy 175.45 111.65) + (xy 175.35 111.65) + (xy 175.35 111.45) + (xy 175.25 111.45) + (xy 175.25 111.25) + (xy 175.15 111.25) + (xy 175.15 110.55) + (xy 175.25 110.55) + (xy 175.25 110.35) + (xy 175.35 110.35) + (xy 175.35 110.15) + (xy 175.45 110.15) + (xy 175.45 110.05) + (xy 175.55 110.05) + (xy 175.55 109.95) + (xy 175.65 109.95) + (xy 175.65 109.85) + (xy 175.75 109.85) + (xy 175.75 109.75) + (xy 175.85 109.75) + (xy 175.85 109.55) + (xy 175.75 109.55) + (xy 175.75 109.45) + (xy 175.65 109.45) + (xy 175.65 109.35) + (xy 175.55 109.35) + (xy 175.55 109.25) + (xy 175.45 109.25) + (xy 175.45 109.15) + (xy 175.35 109.15) + (xy 175.35 108.95) + (xy 175.25 108.95) + (xy 175.25 108.75) + (xy 175.15 108.75) + (xy 175.15 108.35) + (xy 120.55 108.35) + (xy 120.55 111.95) + (xy 120.45 111.95) + (xy 120.45 112.05) + (xy 120.35 112.05) + (xy 120.35 112.15) + (xy 120.25 112.15) + (xy 120.25 112.25) + (xy 120.15 112.25) + (xy 120.15 112.35) + (xy 119.45 112.35) + (xy 119.45 112.25) + (xy 119.35 112.25) + (xy 119.35 112.15) + (xy 119.25 112.15) + (xy 119.25 112.05) + (xy 119.15 112.05) + (xy 119.15 111.95) + (xy 119.05 111.95) + (xy 119.05 108.35) + (xy 119.15 108.35) + (xy 119.15 108.25) + (xy 119.25 108.25) + (xy 119.25 108.15) + (xy 119.35 108.15) + (xy 119.35 108.05) + (xy 119.45 108.05) + (xy 119.45 107.95) + (xy 120.15 107.95) + (xy 120.15 108.05) + (xy 120.25 108.05) + (xy 120.25 108.15) + (xy 120.35 108.15) + (xy 120.35 108.25) + (xy 120.45 108.25) + (xy 120.45 108.35) + (xy 120.55 108.35) + (xy 175.15 108.35) + (xy 175.15 108.05) + (xy 175.25 108.05) + (xy 175.25 107.85) + (xy 175.35 107.85) + (xy 175.35 107.65) + (xy 175.45 107.65) + (xy 175.45 107.55) + (xy 175.55 107.55) + (xy 175.55 107.45) + (xy 175.65 107.45) + (xy 175.65 107.35) + (xy 175.75 107.35) + (xy 175.75 107.25) + (xy 117.25 107.25) + (xy 117.25 107.85) + (xy 117.15 107.85) + (xy 117.15 108.25) + (xy 117.05 108.25) + (xy 117.05 108.45) + (xy 116.95 108.45) + (xy 116.95 108.65) + (xy 116.85 108.65) + (xy 116.85 108.75) + (xy 116.75 108.75) + (xy 116.75 108.85) + (xy 116.65 108.85) + (xy 116.65 108.95) + (xy 116.55 108.95) + (xy 116.55 109.05) + (xy 116.45 109.05) + (xy 116.45 109.15) + (xy 116.35 109.15) + (xy 116.35 109.25) + (xy 116.15 109.25) + (xy 116.15 109.35) + (xy 115.95 109.35) + (xy 115.95 109.45) + (xy 115.55 109.45) + (xy 115.55 109.55) + (xy 114.95 109.55) + (xy 114.95 109.45) + (xy 114.55 109.45) + (xy 114.55 109.35) + (xy 114.35 109.35) + (xy 114.35 109.25) + (xy 114.15 109.25) + (xy 114.15 109.15) + (xy 114.05 109.15) + (xy 114.05 109.05) + (xy 113.95 109.05) + (xy 113.95 108.95) + (xy 113.85 108.95) + (xy 113.85 108.85) + (xy 113.75 108.85) + (xy 113.75 108.75) + (xy 113.65 108.75) + (xy 113.65 108.65) + (xy 113.55 108.65) + (xy 113.55 108.45) + (xy 113.45 108.45) + (xy 113.45 108.25) + (xy 113.35 108.25) + (xy 113.35 107.95) + (xy 113.25 107.95) + (xy 113.25 107.15) + (xy 113.35 107.15) + (xy 113.35 106.85) + (xy 113.45 106.85) + (xy 113.45 106.55) + (xy 113.55 106.55) + (xy 113.55 106.45) + (xy 113.65 106.45) + (xy 113.65 106.25) + (xy 113.75 106.25) + (xy 113.75 106.15) + (xy 113.85 106.15) + (xy 113.85 106.05) + (xy 113.95 106.05) + (xy 113.95 105.95) + (xy 114.15 105.95) + (xy 114.15 105.85) + (xy 114.25 105.85) + (xy 114.25 105.75) + (xy 114.55 105.75) + (xy 114.55 105.65) + (xy 114.85 105.65) + (xy 114.85 105.55) + (xy 115.65 105.55) + (xy 115.65 105.65) + (xy 115.95 105.65) + (xy 115.95 105.75) + (xy 116.15 105.75) + (xy 116.15 105.85) + (xy 116.35 105.85) + (xy 116.35 105.95) + (xy 116.45 105.95) + (xy 116.45 106.05) + (xy 116.55 106.05) + (xy 116.55 106.15) + (xy 116.65 106.15) + (xy 116.65 106.25) + (xy 116.75 106.25) + (xy 116.75 106.35) + (xy 116.85 106.35) + (xy 116.85 106.45) + (xy 116.95 106.45) + (xy 116.95 106.65) + (xy 117.05 106.65) + (xy 117.05 106.85) + (xy 117.15 106.85) + (xy 117.15 107.25) + (xy 117.25 107.25) + (xy 175.75 107.25) + (xy 175.85 107.25) + (xy 175.85 107.05) + (xy 175.75 107.05) + (xy 175.75 106.95) + (xy 175.65 106.95) + (xy 175.65 106.85) + (xy 175.55 106.85) + (xy 175.55 106.75) + (xy 175.45 106.75) + (xy 175.45 106.65) + (xy 175.35 106.65) + (xy 175.35 106.45) + (xy 175.25 106.45) + (xy 175.25 106.25) + (xy 175.15 106.25) + (xy 175.15 105.55) + (xy 175.25 105.55) + (xy 175.25 105.35) + (xy 175.35 105.35) + (xy 175.35 105.15) + (xy 175.45 105.15) + (xy 175.45 105.05) + (xy 175.55 105.05) + (xy 175.55 104.95) + (xy 175.65 104.95) + (xy 175.65 104.85) + (xy 175.55 104.85) + (xy 175.55 104.75) + (xy 175.45 104.75) + (xy 175.45 104.65) + (xy 175.35 104.65) + (xy 175.35 104.55) + (xy 175.25 104.55) + (xy 175.25 104.45) + (xy 175.15 104.45) + (xy 175.15 102.35) + (xy 175.25 102.35) + (xy 175.25 102.25) + (xy 175.35 102.25) + (xy 175.35 102.15) + (xy 177.65 102.15) + (xy 177.65 102.25) + (xy 177.75 102.25) + (xy 177.75 102.35) + (xy 177.85 102.35) + (xy 179.45 102.35) + (xy 179.45 100.75) + (xy 179.35 100.75) + (xy 179.35 100.65) + (xy 179.25 100.65) + (xy 179.25 100.55) + (xy 157.35 100.55) + (xy 157.35 100.65) + (xy 157.25 100.65) + (xy 157.25 100.75) + (xy 157.15 100.75) + (xy 157.15 100.85) + (xy 157.25 100.85) + (xy 157.25 100.95) + (xy 157.35 100.95) + (xy 157.35 101.05) + (xy 157.45 101.05) + (xy 157.45 101.15) + (xy 157.55 101.15) + (xy 157.55 101.35) + (xy 157.65 101.35) + (xy 157.65 101.55) + (xy 157.75 101.55) + (xy 157.75 102.25) + (xy 157.65 102.25) + (xy 157.65 102.45) + (xy 157.55 102.45) + (xy 157.55 102.65) + (xy 157.45 102.65) + (xy 157.45 102.75) + (xy 157.35 102.75) + (xy 157.35 102.85) + (xy 157.15 102.85) + (xy 157.15 102.95) + (xy 156.95 102.95) + (xy 156.95 103.05) + (xy 156.15 103.05) + (xy 156.15 102.95) + (xy 155.95 102.95) + (xy 155.95 102.85) + (xy 155.75 102.85) + (xy 155.75 102.75) + (xy 155.65 102.75) + (xy 155.65 102.55) + (xy 155.55 102.55) + (xy 155.55 102.45) + (xy 155.45 102.45) + (xy 155.45 102.35) + (xy 155.35 102.35) + (xy 155.35 102.25) + (xy 155.25 102.25) + (xy 155.25 102.35) + (xy 155.15 102.35) + (xy 155.15 102.45) + (xy 155.05 102.45) + (xy 155.05 102.55) + (xy 154.95 102.55) + (xy 154.95 102.65) + (xy 154.85 102.65) + (xy 154.85 102.75) + (xy 154.75 102.75) + (xy 154.75 102.85) + (xy 154.65 102.85) + (xy 154.65 102.95) + (xy 154.45 102.95) + (xy 154.45 103.05) + (xy 153.55 103.05) + (xy 153.55 102.95) + (xy 153.35 102.95) + (xy 153.35 102.85) + (xy 153.25 102.85) + (xy 153.25 102.75) + (xy 153.15 102.75) + (xy 153.15 102.65) + (xy 153.05 102.65) + (xy 153.05 102.45) + (xy 152.95 102.45) + (xy 152.95 102.35) + (xy 152.85 102.35) + (xy 152.85 102.25) + (xy 152.65 102.25) + (xy 152.65 102.35) + (xy 152.55 102.35) + (xy 152.55 102.45) + (xy 152.45 102.45) + (xy 152.45 102.65) + (xy 152.35 102.65) + (xy 152.35 102.75) + (xy 152.25 102.75) + (xy 152.25 102.85) + (xy 152.15 102.85) + (xy 152.15 102.95) + (xy 151.95 102.95) + (xy 151.95 103.05) + (xy 151.05 103.05) + (xy 151.05 102.95) + (xy 150.85 102.95) + (xy 150.85 102.85) + (xy 150.75 102.85) + (xy 150.75 102.75) + (xy 150.65 102.75) + (xy 150.65 102.65) + (xy 150.55 102.65) + (xy 150.55 102.55) + (xy 150.45 102.55) + (xy 150.45 102.45) + (xy 150.35 102.45) + (xy 150.35 102.35) + (xy 150.25 102.35) + (xy 150.25 102.25) + (xy 150.15 102.25) + (xy 150.15 102.35) + (xy 150.05 102.35) + (xy 150.05 102.45) + (xy 149.95 102.45) + (xy 149.95 102.55) + (xy 149.85 102.55) + (xy 149.85 102.75) + (xy 149.75 102.75) + (xy 149.75 102.85) + (xy 149.55 102.85) + (xy 149.55 102.95) + (xy 149.35 102.95) + (xy 149.35 103.05) + (xy 148.55 103.05) + (xy 148.55 102.95) + (xy 148.35 102.95) + (xy 148.35 102.85) + (xy 148.15 102.85) + (xy 148.15 102.75) + (xy 148.05 102.75) + (xy 148.05 102.65) + (xy 147.95 102.65) + (xy 147.95 102.45) + (xy 147.85 102.45) + (xy 147.85 102.35) + (xy 147.75 102.35) + (xy 147.75 102.25) + (xy 147.65 102.25) + (xy 147.65 102.35) + (xy 147.55 102.35) + (xy 147.55 102.45) + (xy 147.45 102.45) + (xy 147.45 102.55) + (xy 147.35 102.55) + (xy 147.35 102.65) + (xy 147.25 102.65) + (xy 147.25 102.75) + (xy 147.15 102.75) + (xy 147.15 102.85) + (xy 147.05 102.85) + (xy 147.05 102.95) + (xy 146.85 102.95) + (xy 146.85 103.05) + (xy 145.95 103.05) + (xy 145.95 102.95) + (xy 145.75 102.95) + (xy 145.75 102.85) + (xy 145.65 102.85) + (xy 145.65 102.75) + (xy 145.55 102.75) + (xy 145.55 102.65) + (xy 145.45 102.65) + (xy 145.45 102.55) + (xy 145.35 102.55) + (xy 145.35 102.35) + (xy 145.25 102.35) + (xy 145.25 101.45) + (xy 145.35 101.45) + (xy 145.35 101.25) + (xy 145.45 101.25) + (xy 145.45 101.15) + (xy 145.55 101.15) + (xy 145.55 101.05) + (xy 145.65 101.05) + (xy 145.65 100.95) + (xy 145.75 100.95) + (xy 145.75 100.85) + (xy 145.85 100.85) + (xy 145.85 100.75) + (xy 145.75 100.75) + (xy 145.75 100.65) + (xy 145.65 100.65) + (xy 145.65 100.55) + (xy 142.05 100.55) + (xy 142.05 100.65) + (xy 141.95 100.65) + (xy 141.95 100.75) + (xy 141.85 100.75) + (xy 141.85 100.85) + (xy 141.95 100.85) + (xy 141.95 100.95) + (xy 142.05 100.95) + (xy 142.05 101.05) + (xy 142.15 101.05) + (xy 142.15 101.15) + (xy 142.25 101.15) + (xy 142.25 101.25) + (xy 142.35 101.25) + (xy 142.35 101.45) + (xy 142.45 101.45) + (xy 142.45 101.85) + (xy 142.55 101.85) + (xy 142.55 101.95) + (xy 142.45 101.95) + (xy 142.45 102.35) + (xy 142.35 102.35) + (xy 142.35 102.55) + (xy 142.25 102.55) + (xy 142.25 102.65) + (xy 142.15 102.65) + (xy 142.15 102.75) + (xy 142.05 102.75) + (xy 142.05 102.85) + (xy 141.95 102.85) + (xy 141.95 102.95) + (xy 141.75 102.95) + (xy 141.75 103.05) + (xy 140.85 103.05) + (xy 140.85 102.95) + (xy 140.65 102.95) + (xy 140.65 102.85) + (xy 140.55 102.85) + (xy 140.55 102.75) + (xy 140.45 102.75) + (xy 140.45 102.65) + (xy 140.35 102.65) + (xy 140.35 102.45) + (xy 140.25 102.45) + (xy 140.25 102.25) + (xy 140.15 102.25) + (xy 140.15 101.55) + (xy 140.25 101.55) + (xy 140.25 101.35) + (xy 140.35 101.35) + (xy 140.35 101.15) + (xy 140.45 101.15) + (xy 140.45 101.05) + (xy 140.55 101.05) + (xy 140.55 100.95) + (xy 140.65 100.95) + (xy 140.65 100.85) + (xy 140.75 100.85) + (xy 140.75 100.75) + (xy 140.65 100.75) + (xy 140.65 100.65) + (xy 140.55 100.65) + (xy 140.55 100.55) + (xy 136.35 100.55) + (xy 136.35 100.65) + (xy 136.25 100.65) + (xy 136.25 100.75) + (xy 136.15 100.75) + (xy 136.15 100.85) + (xy 136.25 100.85) + (xy 136.25 100.95) + (xy 136.35 100.95) + (xy 136.35 101.05) + (xy 136.45 101.05) + (xy 136.45 101.15) + (xy 136.55 101.15) + (xy 136.55 101.35) + (xy 136.65 101.35) + (xy 136.65 101.55) + (xy 136.75 101.55) + (xy 136.75 102.25) + (xy 136.65 102.25) + (xy 136.65 102.45) + (xy 136.55 102.45) + (xy 136.55 102.65) + (xy 136.45 102.65) + (xy 136.45 102.75) + (xy 136.35 102.75) + (xy 136.35 102.85) + (xy 136.15 102.85) + (xy 136.15 102.95) + (xy 135.95 102.95) + (xy 135.95 103.05) + (xy 135.15 103.05) + (xy 135.15 102.95) + (xy 134.95 102.95) + (xy 134.95 102.85) + (xy 134.75 102.85) + (xy 134.75 102.75) + (xy 134.65 102.75) + (xy 134.65 102.55) + (xy 134.55 102.55) + (xy 134.55 102.45) + (xy 134.45 102.45) + (xy 134.45 102.35) + (xy 134.35 102.35) + (xy 134.35 102.25) + (xy 134.25 102.25) + (xy 134.25 102.35) + (xy 134.15 102.35) + (xy 134.15 102.45) + (xy 134.05 102.45) + (xy 134.05 102.55) + (xy 133.95 102.55) + (xy 133.95 102.65) + (xy 133.85 102.65) + (xy 133.85 102.75) + (xy 133.75 102.75) + (xy 133.75 102.85) + (xy 133.65 102.85) + (xy 133.65 102.95) + (xy 133.45 102.95) + (xy 133.45 103.05) + (xy 132.55 103.05) + (xy 132.55 102.95) + (xy 132.35 102.95) + (xy 132.35 102.85) + (xy 132.25 102.85) + (xy 132.25 102.75) + (xy 132.15 102.75) + (xy 132.15 102.65) + (xy 132.05 102.65) + (xy 132.05 102.45) + (xy 131.95 102.45) + (xy 131.95 102.35) + (xy 131.85 102.35) + (xy 131.85 102.25) + (xy 131.65 102.25) + (xy 131.65 102.35) + (xy 131.55 102.35) + (xy 131.55 102.45) + (xy 131.45 102.45) + (xy 131.45 102.65) + (xy 131.35 102.65) + (xy 131.35 102.75) + (xy 131.25 102.75) + (xy 131.25 102.85) + (xy 131.15 102.85) + (xy 131.15 102.95) + (xy 130.95 102.95) + (xy 130.95 103.05) + (xy 130.05 103.05) + (xy 130.05 102.95) + (xy 129.85 102.95) + (xy 129.85 102.85) + (xy 129.75 102.85) + (xy 129.75 102.75) + (xy 129.65 102.75) + (xy 129.65 102.65) + (xy 129.55 102.65) + (xy 129.55 102.55) + (xy 129.45 102.55) + (xy 129.45 102.45) + (xy 129.35 102.45) + (xy 129.35 102.35) + (xy 129.25 102.35) + (xy 129.25 102.25) + (xy 129.15 102.25) + (xy 129.15 102.35) + (xy 129.05 102.35) + (xy 129.05 102.45) + (xy 128.95 102.45) + (xy 128.95 102.55) + (xy 128.85 102.55) + (xy 128.85 102.75) + (xy 128.75 102.75) + (xy 128.75 102.85) + (xy 128.55 102.85) + (xy 128.55 102.95) + (xy 128.35 102.95) + (xy 128.35 103.05) + (xy 127.55 103.05) + (xy 127.55 102.95) + (xy 127.25 102.95) + (xy 127.25 103.05) + (xy 127.15 103.05) + (xy 127.15 103.15) + (xy 127.05 103.15) + (xy 127.05 103.25) + (xy 126.95 103.25) + (xy 126.95 103.35) + (xy 126.85 103.35) + (xy 126.85 103.45) + (xy 126.75 103.45) + (xy 126.75 103.55) + (xy 126.65 103.55) + (xy 126.65 103.65) + (xy 126.55 103.65) + (xy 126.55 103.75) + (xy 126.45 103.75) + (xy 126.45 103.85) + (xy 126.35 103.85) + (xy 126.35 103.95) + (xy 126.25 103.95) + (xy 126.25 104.05) + (xy 126.15 104.05) + (xy 126.15 104.15) + (xy 126.05 104.15) + (xy 126.05 104.25) + (xy 125.95 104.25) + (xy 125.95 104.35) + (xy 125.85 104.35) + (xy 125.85 104.45) + (xy 125.75 104.45) + (xy 125.75 104.55) + (xy 125.65 104.55) + (xy 125.65 104.65) + (xy 125.55 104.65) + (xy 125.55 104.75) + (xy 125.45 104.75) + (xy 125.45 104.85) + (xy 125.35 104.85) + (xy 125.35 104.95) + (xy 125.25 104.95) + (xy 125.25 105.05) + (xy 125.15 105.05) + (xy 125.15 105.15) + (xy 125.05 105.15) + (xy 125.05 105.25) + (xy 124.95 105.25) + (xy 124.95 105.35) + (xy 124.85 105.35) + (xy 124.85 105.45) + (xy 124.75 105.45) + (xy 124.75 105.55) + (xy 124.65 105.55) + (xy 124.65 105.65) + (xy 124.55 105.65) + (xy 124.55 105.75) + (xy 124.45 105.75) + (xy 124.45 105.85) + (xy 124.35 105.85) + (xy 124.35 105.95) + (xy 124.15 105.95) + (xy 124.15 106.05) + (xy 118.75 106.05) + (xy 118.75 105.95) + (xy 118.65 105.95) + (xy 118.65 105.85) + (xy 118.55 105.85) + (xy 118.55 105.75) + (xy 118.45 105.75) + (xy 118.45 105.05) + (xy 118.55 105.05) + (xy 118.55 104.95) + (xy 118.65 104.95) + (xy 118.65 104.85) + (xy 118.75 104.85) + (xy 118.75 104.75) + (xy 123.85 104.75) + (xy 123.85 104.65) + (xy 123.95 104.65) + (xy 123.95 104.55) + (xy 124.05 104.55) + (xy 124.05 104.45) + (xy 124.15 104.45) + (xy 124.15 104.35) + (xy 124.25 104.35) + (xy 124.25 104.25) + (xy 124.35 104.25) + (xy 124.35 104.15) + (xy 124.45 104.15) + (xy 124.45 104.05) + (xy 124.55 104.05) + (xy 124.55 103.95) + (xy 124.65 103.95) + (xy 124.65 103.85) + (xy 124.75 103.85) + (xy 124.75 103.75) + (xy 124.85 103.75) + (xy 124.85 103.65) + (xy 124.95 103.65) + (xy 124.95 103.55) + (xy 125.05 103.55) + (xy 125.05 103.45) + (xy 125.15 103.45) + (xy 125.15 103.35) + (xy 125.25 103.35) + (xy 125.25 103.25) + (xy 125.15 103.25) + (xy 125.15 103.15) + (xy 125.05 103.15) + (xy 125.05 103.05) + (xy 124.95 103.05) + (xy 124.95 102.95) + (xy 124.75 102.95) + (xy 124.75 103.05) + (xy 124.65 103.05) + (xy 124.65 103.15) + (xy 124.55 103.15) + (xy 124.55 103.25) + (xy 124.45 103.25) + (xy 124.45 103.35) + (xy 124.35 103.35) + (xy 124.35 103.45) + (xy 124.25 103.45) + (xy 124.25 103.55) + (xy 124.15 103.55) + (xy 124.15 103.65) + (xy 124.05 103.65) + (xy 124.05 103.75) + (xy 123.95 103.75) + (xy 123.95 103.85) + (xy 123.75 103.85) + (xy 123.75 103.95) + (xy 118.95 103.95) + (xy 118.95 103.85) + (xy 118.85 103.85) + (xy 118.85 103.75) + (xy 118.75 103.75) + (xy 118.75 103.65) + (xy 118.65 103.65) + (xy 118.65 102.95) + (xy 118.75 102.95) + (xy 118.75 102.85) + (xy 118.85 102.85) + (xy 118.85 102.75) + (xy 118.95 102.75) + (xy 118.95 102.65) + (xy 119.05 102.65) + (xy 119.05 102.55) + (xy 119.15 102.55) + (xy 119.15 102.45) + (xy 119.25 102.45) + (xy 119.25 102.35) + (xy 105.85 102.35) + (xy 105.85 104.45) + (xy 105.75 104.45) + (xy 105.75 104.55) + (xy 105.65 104.55) + (xy 105.65 104.65) + (xy 105.55 104.65) + (xy 105.55 104.75) + (xy 105.45 104.75) + (xy 105.45 104.85) + (xy 105.35 104.85) + (xy 105.35 104.95) + (xy 105.45 104.95) + (xy 105.45 105.05) + (xy 105.55 105.05) + (xy 105.55 105.15) + (xy 105.65 105.15) + (xy 105.65 105.35) + (xy 105.75 105.35) + (xy 105.75 105.55) + (xy 105.85 105.55) + (xy 105.85 106.25) + (xy 105.75 106.25) + (xy 105.75 106.45) + (xy 105.65 106.45) + (xy 105.65 106.65) + (xy 105.55 106.65) + (xy 105.55 106.75) + (xy 105.45 106.75) + (xy 105.45 106.85) + (xy 105.35 106.85) + (xy 105.35 106.95) + (xy 105.25 106.95) + (xy 105.25 107.05) + (xy 105.15 107.05) + (xy 105.15 107.25) + (xy 105.25 107.25) + (xy 105.25 107.35) + (xy 105.35 107.35) + (xy 105.35 107.45) + (xy 105.45 107.45) + (xy 105.45 107.55) + (xy 105.55 107.55) + (xy 105.55 107.65) + (xy 105.65 107.65) + (xy 105.65 107.85) + (xy 105.75 107.85) + (xy 105.75 108.05) + (xy 105.85 108.05) + (xy 105.85 108.75) + (xy 105.75 108.75) + (xy 105.75 108.95) + (xy 105.65 108.95) + (xy 105.65 109.15) + (xy 105.55 109.15) + (xy 105.55 109.25) + (xy 105.45 109.25) + (xy 105.45 109.35) + (xy 105.35 109.35) + (xy 105.35 109.45) + (xy 105.25 109.45) + (xy 105.25 109.55) + (xy 105.15 109.55) + (xy 105.15 109.75) + (xy 105.25 109.75) + (xy 105.25 109.85) + (xy 105.35 109.85) + (xy 105.35 109.95) + (xy 105.45 109.95) + (xy 105.45 110.05) + (xy 105.55 110.05) + (xy 105.55 110.15) + (xy 105.65 110.15) + (xy 105.65 110.35) + (xy 105.75 110.35) + (xy 105.75 110.55) + (xy 105.85 110.55) + (xy 105.85 111.25) + (xy 105.75 111.25) + (xy 105.75 111.45) + (xy 105.65 111.45) + (xy 105.65 111.65) + (xy 105.55 111.65) + (xy 105.55 111.75) + (xy 105.45 111.75) + (xy 105.45 111.85) + (xy 105.35 111.85) + (xy 105.35 111.95) + (xy 105.15 111.95) + (xy 105.15 112.05) + (xy 104.85 112.05) + (xy 104.85 112.15) + (xy 104.15 112.15) + (xy 104.15 112.05) + (xy 103.85 112.05) + (xy 103.85 111.95) + (xy 103.65 111.95) + (xy 103.65 111.85) + (xy 103.55 111.85) + (xy 103.55 111.75) + (xy 103.45 111.75) + (xy 103.45 111.65) + (xy 103.35 111.65) + (xy 103.35 111.45) + (xy 103.25 111.45) + (xy 103.25 111.25) + (xy 103.15 111.25) + (xy 103.15 110.55) + (xy 103.25 110.55) + (xy 103.25 110.35) + (xy 103.35 110.35) + (xy 103.35 110.15) + (xy 103.45 110.15) + (xy 103.45 110.05) + (xy 103.55 110.05) + (xy 103.55 109.95) + (xy 103.65 109.95) + (xy 103.65 109.85) + (xy 103.75 109.85) + (xy 103.75 109.75) + (xy 103.85 109.75) + (xy 103.85 109.55) + (xy 103.75 109.55) + (xy 103.75 109.45) + (xy 103.65 109.45) + (xy 103.65 109.35) + (xy 103.55 109.35) + (xy 103.55 109.25) + (xy 103.45 109.25) + (xy 103.45 109.15) + (xy 103.35 109.15) + (xy 103.35 108.95) + (xy 103.25 108.95) + (xy 103.25 108.75) + (xy 103.15 108.75) + (xy 103.15 108.05) + (xy 103.25 108.05) + (xy 103.25 107.85) + (xy 103.35 107.85) + (xy 103.35 107.65) + (xy 103.45 107.65) + (xy 103.45 107.55) + (xy 103.55 107.55) + (xy 103.55 107.45) + (xy 103.65 107.45) + (xy 103.65 107.35) + (xy 103.75 107.35) + (xy 103.75 107.25) + (xy 103.85 107.25) + (xy 103.85 107.05) + (xy 103.75 107.05) + (xy 103.75 106.95) + (xy 103.65 106.95) + (xy 103.65 106.85) + (xy 103.55 106.85) + (xy 103.55 106.75) + (xy 103.45 106.75) + (xy 103.45 106.65) + (xy 103.35 106.65) + (xy 103.35 106.45) + (xy 103.25 106.45) + (xy 103.25 106.25) + (xy 103.15 106.25) + (xy 103.15 105.55) + (xy 103.25 105.55) + (xy 103.25 105.35) + (xy 103.35 105.35) + (xy 103.35 105.15) + (xy 103.45 105.15) + (xy 103.45 105.05) + (xy 103.55 105.05) + (xy 103.55 104.95) + (xy 103.65 104.95) + (xy 103.65 104.85) + (xy 103.55 104.85) + (xy 103.55 104.75) + (xy 103.45 104.75) + (xy 103.45 104.65) + (xy 103.35 104.65) + (xy 103.35 104.55) + (xy 103.25 104.55) + (xy 103.25 104.45) + (xy 103.15 104.45) + (xy 103.15 102.35) + (xy 103.25 102.35) + (xy 103.25 102.25) + (xy 103.35 102.25) + (xy 103.35 102.15) + (xy 105.65 102.15) + (xy 105.65 102.25) + (xy 105.75 102.25) + (xy 105.75 102.35) + (xy 105.85 102.35) + (xy 119.25 102.35) + (xy 119.25 102.25) + (xy 119.15 102.25) + (xy 119.15 101.55) + (xy 119.25 101.55) + (xy 119.25 101.35) + (xy 119.35 101.35) + (xy 119.35 101.15) + (xy 119.45 101.15) + (xy 119.45 101.05) + (xy 119.55 101.05) + (xy 119.55 100.95) + (xy 119.65 100.95) + (xy 119.65 100.85) + (xy 119.75 100.85) + (xy 119.75 100.75) + (xy 119.65 100.75) + (xy 119.65 100.65) + (xy 119.55 100.65) + (xy 119.55 100.55) + ) + ) + ) + (zone + (net 1) + (net_name "/GND") + (layer "F.Cu") + (uuid "70aec177-223c-5f93-8ff7-8cb22a539fd3") + (name "GND_F") + (hatch edge 0.5) + (connect_pads yes + (clearance 0.3) + ) + (min_thickness 0.25) + (filled_areas_thickness no) + (fill yes + (thermal_gap 0.5) + (thermal_bridge_width 0.5) + ) + (polygon + (pts + (xy 100.25 100.25) + (xy 179.75 100.25) + (xy 179.75 163.09) + (xy 100.25 163.09) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 100.75 100.55) + (xy 100.75 100.65) + (xy 100.65 100.65) + (xy 100.65 100.75) + (xy 100.55 100.75) + (xy 100.55 162.55) + (xy 100.65 162.55) + (xy 100.65 162.65) + (xy 100.75 162.65) + (xy 100.75 162.75) + (xy 118.35 162.75) + (xy 118.35 162.65) + (xy 118.45 162.65) + (xy 118.45 162.55) + (xy 118.55 162.55) + (xy 118.55 156.65) + (xy 119.75 156.65) + (xy 119.75 156.55) + (xy 119.85 156.55) + (xy 119.85 156.45) + (xy 119.95 156.45) + (xy 119.95 156.35) + (xy 119.85 156.35) + (xy 119.85 156.25) + (xy 119.75 156.25) + (xy 119.75 156.15) + (xy 119.55 156.15) + (xy 119.55 155.95) + (xy 119.45 155.95) + (xy 119.45 155.35) + (xy 115.95 155.35) + (xy 115.95 156.25) + (xy 115.85 156.25) + (xy 115.85 156.55) + (xy 115.75 156.55) + (xy 115.75 156.75) + (xy 115.65 156.75) + (xy 115.65 156.95) + (xy 115.55 156.95) + (xy 115.55 157.05) + (xy 115.45 157.05) + (xy 115.45 157.15) + (xy 115.35 157.15) + (xy 115.35 157.25) + (xy 115.25 157.25) + (xy 115.25 157.35) + (xy 115.15 157.35) + (xy 115.15 157.45) + (xy 114.95 157.45) + (xy 114.95 157.55) + (xy 114.75 157.55) + (xy 114.75 157.65) + (xy 114.55 157.65) + (xy 114.55 157.75) + (xy 113.45 157.75) + (xy 113.45 157.65) + (xy 113.15 157.65) + (xy 113.15 157.55) + (xy 112.95 157.55) + (xy 112.95 157.45) + (xy 112.85 157.45) + (xy 112.85 157.35) + (xy 112.65 157.35) + (xy 112.65 157.25) + (xy 112.55 157.25) + (xy 112.55 157.15) + (xy 112.45 157.15) + (xy 112.45 157.05) + (xy 112.35 157.05) + (xy 112.35 156.85) + (xy 112.25 156.85) + (xy 112.25 156.65) + (xy 112.15 156.65) + (xy 112.15 156.45) + (xy 112.05 156.45) + (xy 112.05 155.95) + (xy 111.95 155.95) + (xy 111.95 155.65) + (xy 112.05 155.65) + (xy 112.05 155.15) + (xy 112.15 155.15) + (xy 112.15 154.95) + (xy 112.25 154.95) + (xy 112.25 154.75) + (xy 112.35 154.75) + (xy 112.35 154.55) + (xy 112.45 154.55) + (xy 112.45 154.45) + (xy 112.55 154.45) + (xy 112.55 154.35) + (xy 112.65 154.35) + (xy 112.65 154.25) + (xy 112.85 154.25) + (xy 112.85 154.15) + (xy 112.95 154.15) + (xy 112.95 154.05) + (xy 113.15 154.05) + (xy 113.15 153.95) + (xy 113.45 153.95) + (xy 113.45 153.85) + (xy 114.55 153.85) + (xy 114.55 153.95) + (xy 114.75 153.95) + (xy 114.75 154.05) + (xy 114.95 154.05) + (xy 114.95 154.15) + (xy 115.15 154.15) + (xy 115.15 154.25) + (xy 115.25 154.25) + (xy 115.25 154.35) + (xy 115.35 154.35) + (xy 115.35 154.45) + (xy 115.45 154.45) + (xy 115.45 154.55) + (xy 115.55 154.55) + (xy 115.55 154.65) + (xy 115.65 154.65) + (xy 115.65 154.85) + (xy 115.75 154.85) + (xy 115.75 155.05) + (xy 115.85 155.05) + (xy 115.85 155.35) + (xy 115.95 155.35) + (xy 119.45 155.35) + (xy 119.45 154.05) + (xy 119.55 154.05) + (xy 119.55 153.85) + (xy 119.75 153.85) + (xy 119.75 153.75) + (xy 120.95 153.75) + (xy 120.95 153.65) + (xy 121.05 153.65) + (xy 121.05 153.55) + (xy 121.15 153.55) + (xy 121.15 153.45) + (xy 121.25 153.45) + (xy 121.25 153.35) + (xy 121.35 153.35) + (xy 121.35 153.25) + (xy 121.45 153.25) + (xy 121.45 153.15) + (xy 121.55 153.15) + (xy 121.55 153.05) + (xy 121.65 153.05) + (xy 121.65 152.95) + (xy 121.75 152.95) + (xy 121.75 152.85) + (xy 121.85 152.85) + (xy 121.85 152.75) + (xy 121.95 152.75) + (xy 121.95 152.65) + (xy 122.05 152.65) + (xy 122.05 152.55) + (xy 123.35 152.55) + (xy 123.35 152.45) + (xy 123.45 152.45) + (xy 123.45 152.35) + (xy 123.55 152.35) + (xy 123.55 152.25) + (xy 123.45 152.25) + (xy 123.45 152.15) + (xy 123.35 152.15) + (xy 123.35 152.05) + (xy 123.25 152.05) + (xy 123.25 151.95) + (xy 123.15 151.95) + (xy 123.15 150.95) + (xy 123.25 150.95) + (xy 123.25 150.75) + (xy 123.15 150.75) + (xy 123.15 149.65) + (xy 123.25 149.65) + (xy 123.25 149.45) + (xy 123.15 149.45) + (xy 123.15 148.35) + (xy 123.25 148.35) + (xy 123.25 148.15) + (xy 123.15 148.15) + (xy 123.15 147.15) + (xy 123.25 147.15) + (xy 123.25 147.05) + (xy 123.35 147.05) + (xy 123.35 146.95) + (xy 123.25 146.95) + (xy 123.25 146.85) + (xy 123.15 146.85) + (xy 123.15 146.75) + (xy 122.65 146.75) + (xy 122.65 146.65) + (xy 122.55 146.65) + (xy 122.55 146.55) + (xy 122.45 146.55) + (xy 122.45 146.45) + (xy 122.35 146.45) + (xy 122.35 145.75) + (xy 122.45 145.75) + (xy 122.45 145.65) + (xy 122.55 145.65) + (xy 122.55 145.55) + (xy 122.65 145.55) + (xy 122.65 145.45) + (xy 122.95 145.45) + (xy 122.95 145.35) + (xy 123.05 145.35) + (xy 123.05 145.25) + (xy 123.15 145.25) + (xy 123.15 144.55) + (xy 123.25 144.55) + (xy 123.25 144.35) + (xy 123.15 144.35) + (xy 123.15 144.25) + (xy 123.05 144.25) + (xy 123.05 144.15) + (xy 122.95 144.15) + (xy 122.95 144.25) + (xy 122.85 144.25) + (xy 122.85 144.35) + (xy 122.75 144.35) + (xy 122.75 144.45) + (xy 122.65 144.45) + (xy 122.65 144.55) + (xy 122.55 144.55) + (xy 122.55 144.65) + (xy 122.45 144.65) + (xy 122.45 144.75) + (xy 122.35 144.75) + (xy 122.35 144.85) + (xy 122.25 144.85) + (xy 122.25 144.95) + (xy 122.15 144.95) + (xy 122.15 145.05) + (xy 122.05 145.05) + (xy 122.05 145.15) + (xy 121.95 145.15) + (xy 121.95 145.25) + (xy 121.85 145.25) + (xy 121.85 145.35) + (xy 121.75 145.35) + (xy 121.75 145.45) + (xy 121.65 145.45) + (xy 121.65 145.55) + (xy 121.55 145.55) + (xy 121.55 145.85) + (xy 121.45 145.85) + (xy 121.45 146.05) + (xy 121.35 146.05) + (xy 121.35 146.15) + (xy 121.25 146.15) + (xy 121.25 146.25) + (xy 121.15 146.25) + (xy 121.15 146.35) + (xy 121.05 146.35) + (xy 121.05 146.45) + (xy 120.95 146.45) + (xy 120.95 146.55) + (xy 120.85 146.55) + (xy 120.85 146.85) + (xy 120.75 146.85) + (xy 120.75 146.95) + (xy 120.65 146.95) + (xy 120.65 147.05) + (xy 120.75 147.05) + (xy 120.75 147.15) + (xy 120.85 147.15) + (xy 120.85 148.15) + (xy 120.75 148.15) + (xy 120.75 148.35) + (xy 120.85 148.35) + (xy 120.85 149.45) + (xy 120.75 149.45) + (xy 120.75 149.65) + (xy 120.85 149.65) + (xy 120.85 150.75) + (xy 120.75 150.75) + (xy 120.75 150.95) + (xy 120.85 150.95) + (xy 120.85 151.95) + (xy 120.75 151.95) + (xy 120.75 152.05) + (xy 120.65 152.05) + (xy 120.65 152.15) + (xy 118.45 152.15) + (xy 118.45 152.05) + (xy 118.25 152.05) + (xy 118.25 151.85) + (xy 118.15 151.85) + (xy 118.15 150.95) + (xy 118.25 150.95) + (xy 118.25 150.85) + (xy 118.35 150.85) + (xy 118.35 150.75) + (xy 118.25 150.75) + (xy 118.25 150.65) + (xy 118.15 150.65) + (xy 118.15 150.55) + (xy 118.05 150.55) + (xy 118.05 150.45) + (xy 117.95 150.45) + (xy 117.95 150.55) + (xy 117.85 150.55) + (xy 117.85 150.65) + (xy 115.35 150.65) + (xy 115.35 150.75) + (xy 115.25 150.75) + (xy 115.25 150.85) + (xy 115.15 150.85) + (xy 115.15 150.95) + (xy 115.05 150.95) + (xy 115.05 151.05) + (xy 114.95 151.05) + (xy 114.95 151.15) + (xy 113.35 151.15) + (xy 113.35 151.05) + (xy 113.15 151.05) + (xy 113.15 150.95) + (xy 113.05 150.95) + (xy 113.05 150.85) + (xy 112.95 150.85) + (xy 112.95 150.95) + (xy 112.85 150.95) + (xy 112.85 151.05) + (xy 112.65 151.05) + (xy 112.65 151.15) + (xy 111.05 151.15) + (xy 111.05 151.05) + (xy 110.95 151.05) + (xy 110.95 150.95) + (xy 110.85 150.95) + (xy 110.85 150.85) + (xy 110.75 150.85) + (xy 110.75 150.75) + (xy 110.65 150.75) + (xy 110.65 150.65) + (xy 109.95 150.65) + (xy 109.95 150.55) + (xy 109.85 150.55) + (xy 109.85 150.45) + (xy 109.75 150.45) + (xy 109.75 150.35) + (xy 109.65 150.35) + (xy 109.65 150.25) + (xy 109.55 150.25) + (xy 109.55 150.15) + (xy 109.45 150.15) + (xy 109.45 150.05) + (xy 109.35 150.05) + (xy 109.35 149.95) + (xy 109.25 149.95) + (xy 109.25 149.85) + (xy 109.15 149.85) + (xy 109.15 149.75) + (xy 109.05 149.75) + (xy 109.05 149.65) + (xy 108.95 149.65) + (xy 108.95 149.55) + (xy 108.85 149.55) + (xy 108.85 149.45) + (xy 108.75 149.45) + (xy 108.75 149.35) + (xy 108.65 149.35) + (xy 108.65 149.25) + (xy 108.55 149.25) + (xy 108.55 149.15) + (xy 108.45 149.15) + (xy 108.45 149.05) + (xy 108.35 149.05) + (xy 108.35 148.95) + (xy 108.25 148.95) + (xy 108.25 148.85) + (xy 107.85 148.85) + (xy 107.85 148.75) + (xy 107.75 148.75) + (xy 107.75 148.65) + (xy 107.65 148.65) + (xy 107.65 148.55) + (xy 107.55 148.55) + (xy 107.55 147.85) + (xy 107.65 147.85) + (xy 107.65 147.75) + (xy 107.75 147.75) + (xy 107.75 147.65) + (xy 107.85 147.65) + (xy 107.85 147.55) + (xy 107.95 147.55) + (xy 107.95 147.45) + (xy 108.05 147.45) + (xy 108.05 147.35) + (xy 107.95 147.35) + (xy 107.95 147.25) + (xy 107.85 147.25) + (xy 107.85 147.15) + (xy 106.65 147.15) + (xy 106.65 147.25) + (xy 106.55 147.25) + (xy 106.55 147.35) + (xy 106.45 147.35) + (xy 106.45 147.45) + (xy 106.35 147.45) + (xy 106.35 147.55) + (xy 105.65 147.55) + (xy 105.65 147.45) + (xy 105.55 147.45) + (xy 105.55 147.35) + (xy 105.45 147.35) + (xy 105.45 147.25) + (xy 105.35 147.25) + (xy 105.35 146.95) + (xy 105.25 146.95) + (xy 105.25 146.85) + (xy 105.35 146.85) + (xy 105.35 146.55) + (xy 105.45 146.55) + (xy 105.45 146.35) + (xy 105.65 146.35) + (xy 105.65 146.25) + (xy 105.85 146.25) + (xy 105.85 146.15) + (xy 106.15 146.15) + (xy 106.15 146.05) + (xy 106.25 146.05) + (xy 106.25 145.95) + (xy 106.35 145.95) + (xy 106.35 145.15) + (xy 106.25 145.15) + (xy 106.25 145.05) + (xy 106.15 145.05) + (xy 106.15 144.95) + (xy 105.95 144.95) + (xy 105.95 144.85) + (xy 105.75 144.85) + (xy 105.75 144.75) + (xy 105.65 144.75) + (xy 105.65 144.65) + (xy 105.55 144.65) + (xy 105.55 144.45) + (xy 105.45 144.45) + (xy 105.45 144.05) + (xy 105.55 144.05) + (xy 105.55 143.85) + (xy 105.65 143.85) + (xy 105.65 143.65) + (xy 105.55 143.65) + (xy 105.55 143.45) + (xy 105.45 143.45) + (xy 105.45 143.05) + (xy 105.55 143.05) + (xy 105.55 142.85) + (xy 105.65 142.85) + (xy 105.65 142.75) + (xy 105.75 142.75) + (xy 105.75 142.65) + (xy 105.95 142.65) + (xy 105.95 142.55) + (xy 106.15 142.55) + (xy 106.15 142.45) + (xy 106.25 142.45) + (xy 106.25 142.35) + (xy 106.35 142.35) + (xy 106.35 142.05) + (xy 106.25 142.05) + (xy 106.25 141.95) + (xy 106.15 141.95) + (xy 106.15 141.85) + (xy 105.85 141.85) + (xy 105.85 141.75) + (xy 105.65 141.75) + (xy 105.65 141.65) + (xy 105.45 141.65) + (xy 105.45 141.45) + (xy 105.35 141.45) + (xy 105.35 141.15) + (xy 105.25 141.15) + (xy 105.25 141.05) + (xy 105.35 141.05) + (xy 105.35 140.75) + (xy 105.45 140.75) + (xy 105.45 140.65) + (xy 105.55 140.65) + (xy 105.55 140.55) + (xy 105.65 140.55) + (xy 105.65 140.45) + (xy 106.35 140.45) + (xy 106.35 140.55) + (xy 106.45 140.55) + (xy 106.45 140.65) + (xy 106.55 140.65) + (xy 106.55 140.75) + (xy 106.65 140.75) + (xy 106.65 140.85) + (xy 108.35 140.85) + (xy 108.35 140.95) + (xy 109.65 140.95) + (xy 109.65 140.85) + (xy 109.75 140.85) + (xy 109.75 140.75) + (xy 109.85 140.75) + (xy 109.85 140.65) + (xy 109.95 140.65) + (xy 109.95 140.55) + (xy 110.05 140.55) + (xy 110.05 140.45) + (xy 110.25 140.45) + (xy 110.25 140.35) + (xy 110.35 140.35) + (xy 110.35 140.25) + (xy 110.45 140.25) + (xy 110.45 140.15) + (xy 110.55 140.15) + (xy 110.55 138.95) + (xy 110.65 138.95) + (xy 110.65 138.85) + (xy 111.25 138.85) + (xy 111.25 138.75) + (xy 111.35 138.75) + (xy 111.35 138.65) + (xy 111.45 138.65) + (xy 111.45 138.55) + (xy 111.55 138.55) + (xy 111.55 138.45) + (xy 111.65 138.45) + (xy 111.65 138.35) + (xy 111.75 138.35) + (xy 111.75 138.25) + (xy 111.85 138.25) + (xy 111.85 138.15) + (xy 111.95 138.15) + (xy 111.95 138.05) + (xy 112.05 138.05) + (xy 112.05 137.95) + (xy 112.15 137.95) + (xy 112.15 137.85) + (xy 112.25 137.85) + (xy 112.25 137.75) + (xy 112.35 137.75) + (xy 112.35 137.65) + (xy 112.45 137.65) + (xy 112.45 137.55) + (xy 112.55 137.55) + (xy 112.55 137.45) + (xy 112.65 137.45) + (xy 112.65 137.35) + (xy 112.75 137.35) + (xy 112.75 137.25) + (xy 112.85 137.25) + (xy 112.85 137.15) + (xy 112.95 137.15) + (xy 112.95 137.05) + (xy 113.05 137.05) + (xy 113.05 136.95) + (xy 117.15 136.95) + (xy 117.15 136.85) + (xy 117.25 136.85) + (xy 117.25 136.75) + (xy 117.35 136.75) + (xy 117.35 136.65) + (xy 117.25 136.65) + (xy 117.25 136.55) + (xy 117.15 136.55) + (xy 117.15 136.45) + (xy 116.95 136.45) + (xy 116.95 136.25) + (xy 116.85 136.25) + (xy 116.85 134.55) + (xy 116.75 134.55) + (xy 116.75 134.45) + (xy 116.65 134.45) + (xy 116.65 134.35) + (xy 116.55 134.35) + (xy 116.55 134.25) + (xy 116.45 134.25) + (xy 116.45 134.15) + (xy 116.35 134.15) + (xy 116.35 133.95) + (xy 116.25 133.95) + (xy 116.25 133.85) + (xy 116.15 133.85) + (xy 116.15 129.25) + (xy 107.45 129.25) + (xy 107.45 129.75) + (xy 107.35 129.75) + (xy 107.35 130.05) + (xy 107.25 130.05) + (xy 107.25 130.25) + (xy 107.15 130.25) + (xy 107.15 130.35) + (xy 107.05 130.35) + (xy 107.05 130.55) + (xy 106.85 130.55) + (xy 106.85 130.65) + (xy 106.75 130.65) + (xy 106.75 130.75) + (xy 106.55 130.75) + (xy 106.55 130.85) + (xy 104.05 130.85) + (xy 104.05 130.75) + (xy 103.85 130.75) + (xy 103.85 130.65) + (xy 103.75 130.65) + (xy 103.75 130.55) + (xy 103.55 130.55) + (xy 103.55 130.35) + (xy 103.45 130.35) + (xy 103.45 130.25) + (xy 103.35 130.25) + (xy 103.35 130.05) + (xy 103.25 130.05) + (xy 103.25 129.75) + (xy 103.15 129.75) + (xy 103.15 129.25) + (xy 103.25 129.25) + (xy 103.25 128.95) + (xy 103.35 128.95) + (xy 103.35 128.75) + (xy 103.45 128.75) + (xy 103.45 128.65) + (xy 103.55 128.65) + (xy 103.55 128.45) + (xy 103.75 128.45) + (xy 103.75 128.35) + (xy 103.85 128.35) + (xy 103.85 128.25) + (xy 104.05 128.25) + (xy 104.05 128.15) + (xy 106.55 128.15) + (xy 106.55 128.25) + (xy 106.75 128.25) + (xy 106.75 128.35) + (xy 106.85 128.35) + (xy 106.85 128.45) + (xy 107.05 128.45) + (xy 107.05 128.65) + (xy 107.15 128.65) + (xy 107.15 128.75) + (xy 107.25 128.75) + (xy 107.25 128.95) + (xy 107.35 128.95) + (xy 107.35 129.25) + (xy 107.45 129.25) + (xy 116.15 129.25) + (xy 116.15 125.85) + (xy 116.05 125.85) + (xy 116.05 125.75) + (xy 115.95 125.75) + (xy 115.95 125.65) + (xy 114.95 125.65) + (xy 114.95 125.55) + (xy 114.85 125.55) + (xy 114.85 125.45) + (xy 114.75 125.45) + (xy 114.75 122.75) + (xy 113.65 122.75) + (xy 113.65 127.25) + (xy 113.55 127.25) + (xy 113.55 127.35) + (xy 111.05 127.35) + (xy 111.05 127.25) + (xy 110.95 127.25) + (xy 110.95 124.55) + (xy 104.45 124.55) + (xy 104.45 125.45) + (xy 104.35 125.45) + (xy 104.35 125.65) + (xy 104.25 125.65) + (xy 104.25 125.75) + (xy 104.15 125.75) + (xy 104.15 125.85) + (xy 104.05 125.85) + (xy 104.05 125.95) + (xy 103.95 125.95) + (xy 103.95 126.05) + (xy 103.75 126.05) + (xy 103.75 126.15) + (xy 102.85 126.15) + (xy 102.85 126.05) + (xy 102.65 126.05) + (xy 102.65 125.95) + (xy 102.55 125.95) + (xy 102.55 125.85) + (xy 102.45 125.85) + (xy 102.45 125.75) + (xy 102.35 125.75) + (xy 102.35 125.65) + (xy 102.25 125.65) + (xy 102.25 125.45) + (xy 102.15 125.45) + (xy 102.15 124.55) + (xy 102.25 124.55) + (xy 102.25 124.35) + (xy 102.35 124.35) + (xy 102.35 124.25) + (xy 102.45 124.25) + (xy 102.45 124.15) + (xy 102.55 124.15) + (xy 102.55 124.05) + (xy 102.65 124.05) + (xy 102.65 123.95) + (xy 102.85 123.95) + (xy 102.85 123.85) + (xy 103.75 123.85) + (xy 103.75 123.95) + (xy 103.95 123.95) + (xy 103.95 124.05) + (xy 104.05 124.05) + (xy 104.05 124.15) + (xy 104.15 124.15) + (xy 104.15 124.25) + (xy 104.25 124.25) + (xy 104.25 124.35) + (xy 104.35 124.35) + (xy 104.35 124.55) + (xy 104.45 124.55) + (xy 110.95 124.55) + (xy 110.95 123.75) + (xy 110.85 123.75) + (xy 110.85 123.65) + (xy 110.75 123.65) + (xy 110.75 123.55) + (xy 110.65 123.55) + (xy 110.65 123.45) + (xy 110.55 123.45) + (xy 110.55 123.35) + (xy 110.45 123.35) + (xy 110.45 123.15) + (xy 110.35 123.15) + (xy 110.35 123.05) + (xy 110.25 123.05) + (xy 110.25 120.25) + (xy 107.45 120.25) + (xy 107.45 120.75) + (xy 107.35 120.75) + (xy 107.35 121.05) + (xy 107.25 121.05) + (xy 107.25 121.25) + (xy 107.15 121.25) + (xy 107.15 121.35) + (xy 107.05 121.35) + (xy 107.05 121.55) + (xy 106.85 121.55) + (xy 106.85 121.65) + (xy 106.75 121.65) + (xy 106.75 121.75) + (xy 106.55 121.75) + (xy 106.55 121.85) + (xy 104.05 121.85) + (xy 104.05 121.75) + (xy 103.85 121.75) + (xy 103.85 121.65) + (xy 103.75 121.65) + (xy 103.75 121.55) + (xy 103.55 121.55) + (xy 103.55 121.35) + (xy 103.45 121.35) + (xy 103.45 121.25) + (xy 103.35 121.25) + (xy 103.35 121.05) + (xy 103.25 121.05) + (xy 103.25 120.75) + (xy 103.15 120.75) + (xy 103.15 120.25) + (xy 103.25 120.25) + (xy 103.25 119.95) + (xy 103.35 119.95) + (xy 103.35 119.75) + (xy 103.45 119.75) + (xy 103.45 119.65) + (xy 103.55 119.65) + (xy 103.55 119.45) + (xy 103.75 119.45) + (xy 103.75 119.35) + (xy 103.85 119.35) + (xy 103.85 119.25) + (xy 104.05 119.25) + (xy 104.05 119.15) + (xy 106.55 119.15) + (xy 106.55 119.25) + (xy 106.75 119.25) + (xy 106.75 119.35) + (xy 106.85 119.35) + (xy 106.85 119.45) + (xy 107.05 119.45) + (xy 107.05 119.65) + (xy 107.15 119.65) + (xy 107.15 119.75) + (xy 107.25 119.75) + (xy 107.25 119.95) + (xy 107.35 119.95) + (xy 107.35 120.25) + (xy 107.45 120.25) + (xy 110.25 120.25) + (xy 110.25 118.45) + (xy 110.15 118.45) + (xy 110.15 118.35) + (xy 110.05 118.35) + (xy 110.05 118.25) + (xy 109.65 118.25) + (xy 109.65 118.15) + (xy 109.55 118.15) + (xy 109.55 114.25) + (xy 109.65 114.25) + (xy 109.65 114.15) + (xy 111.25 114.15) + (xy 111.25 114.25) + (xy 111.35 114.25) + (xy 111.35 114.45) + (xy 111.45 114.45) + (xy 111.45 117.35) + (xy 111.55 117.35) + (xy 111.55 117.45) + (xy 111.65 117.45) + (xy 111.65 117.55) + (xy 111.75 117.55) + (xy 111.75 122.35) + (xy 111.85 122.35) + (xy 111.85 122.45) + (xy 111.95 122.45) + (xy 111.95 122.55) + (xy 112.05 122.55) + (xy 112.05 122.65) + (xy 113.55 122.65) + (xy 113.55 122.75) + (xy 113.65 122.75) + (xy 114.75 122.75) + (xy 114.75 122.55) + (xy 114.85 122.55) + (xy 114.85 122.45) + (xy 114.95 122.45) + (xy 114.95 122.35) + (xy 116.55 122.35) + (xy 116.55 122.25) + (xy 116.65 122.25) + (xy 116.65 122.15) + (xy 116.75 122.15) + (xy 116.75 122.05) + (xy 116.85 122.05) + (xy 116.85 121.95) + (xy 116.95 121.95) + (xy 116.95 121.85) + (xy 116.85 121.85) + (xy 116.85 121.75) + (xy 116.75 121.75) + (xy 116.75 121.65) + (xy 114.95 121.65) + (xy 114.95 121.55) + (xy 114.85 121.55) + (xy 114.85 121.45) + (xy 114.75 121.45) + (xy 114.75 119.25) + (xy 114.65 119.25) + (xy 114.65 119.15) + (xy 114.55 119.15) + (xy 114.55 118.45) + (xy 114.45 118.45) + (xy 114.45 118.35) + (xy 114.35 118.35) + (xy 114.35 118.25) + (xy 113.95 118.25) + (xy 113.95 118.15) + (xy 113.85 118.15) + (xy 113.85 117.95) + (xy 113.75 117.95) + (xy 113.75 114.45) + (xy 113.85 114.45) + (xy 113.85 114.25) + (xy 113.95 114.25) + (xy 113.95 114.15) + (xy 115.55 114.15) + (xy 115.55 114.25) + (xy 115.65 114.25) + (xy 115.65 117.25) + (xy 115.75 117.25) + (xy 115.75 117.35) + (xy 115.85 117.35) + (xy 115.85 117.45) + (xy 115.95 117.45) + (xy 115.95 117.55) + (xy 116.05 117.55) + (xy 116.05 118.15) + (xy 116.15 118.15) + (xy 116.15 118.25) + (xy 116.25 118.25) + (xy 116.25 118.35) + (xy 117.05 118.35) + (xy 117.05 118.45) + (xy 117.15 118.45) + (xy 117.15 118.55) + (xy 117.25 118.55) + (xy 117.25 121.25) + (xy 117.35 121.25) + (xy 117.35 121.35) + (xy 117.45 121.35) + (xy 117.45 121.45) + (xy 118.45 121.45) + (xy 118.45 121.35) + (xy 118.55 121.35) + (xy 118.55 121.25) + (xy 118.65 121.25) + (xy 118.65 119.95) + (xy 118.55 119.95) + (xy 118.55 119.85) + (xy 118.45 119.85) + (xy 118.45 119.75) + (xy 118.35 119.75) + (xy 118.35 119.65) + (xy 118.25 119.65) + (xy 118.25 119.45) + (xy 118.15 119.45) + (xy 118.15 119.35) + (xy 118.05 119.35) + (xy 118.05 112.25) + (xy 118.15 112.25) + (xy 118.15 112.15) + (xy 118.25 112.15) + (xy 118.25 111.95) + (xy 118.35 111.95) + (xy 118.35 111.85) + (xy 118.45 111.85) + (xy 118.45 111.75) + (xy 118.55 111.75) + (xy 118.55 111.65) + (xy 118.65 111.65) + (xy 118.65 111.55) + (xy 118.75 111.55) + (xy 118.75 111.45) + (xy 118.65 111.45) + (xy 118.65 111.35) + (xy 118.55 111.35) + (xy 118.55 111.25) + (xy 105.85 111.25) + (xy 105.85 111.35) + (xy 105.75 111.35) + (xy 105.75 111.45) + (xy 105.65 111.45) + (xy 105.65 111.65) + (xy 105.55 111.65) + (xy 105.55 111.75) + (xy 105.45 111.75) + (xy 105.45 111.85) + (xy 105.35 111.85) + (xy 105.35 111.95) + (xy 105.15 111.95) + (xy 105.15 112.05) + (xy 104.85 112.05) + (xy 104.85 112.15) + (xy 104.15 112.15) + (xy 104.15 112.05) + (xy 103.85 112.05) + (xy 103.85 111.95) + (xy 103.65 111.95) + (xy 103.65 111.85) + (xy 103.55 111.85) + (xy 103.55 111.75) + (xy 103.45 111.75) + (xy 103.45 111.65) + (xy 103.35 111.65) + (xy 103.35 111.45) + (xy 103.25 111.45) + (xy 103.25 111.25) + (xy 103.15 111.25) + (xy 103.15 110.55) + (xy 103.25 110.55) + (xy 103.25 110.35) + (xy 103.35 110.35) + (xy 103.35 110.15) + (xy 103.45 110.15) + (xy 103.45 110.05) + (xy 103.55 110.05) + (xy 103.55 109.95) + (xy 103.65 109.95) + (xy 103.65 109.85) + (xy 103.75 109.85) + (xy 103.75 109.75) + (xy 103.85 109.75) + (xy 103.85 109.55) + (xy 103.75 109.55) + (xy 103.75 109.45) + (xy 103.65 109.45) + (xy 103.65 109.35) + (xy 103.55 109.35) + (xy 103.55 109.25) + (xy 103.45 109.25) + (xy 103.45 109.15) + (xy 103.35 109.15) + (xy 103.35 108.95) + (xy 103.25 108.95) + (xy 103.25 108.75) + (xy 103.15 108.75) + (xy 103.15 108.05) + (xy 103.25 108.05) + (xy 103.25 107.85) + (xy 103.35 107.85) + (xy 103.35 107.65) + (xy 103.45 107.65) + (xy 103.45 107.55) + (xy 103.55 107.55) + (xy 103.55 107.45) + (xy 103.65 107.45) + (xy 103.65 107.35) + (xy 103.75 107.35) + (xy 103.75 107.25) + (xy 103.85 107.25) + (xy 103.85 107.05) + (xy 103.75 107.05) + (xy 103.75 106.95) + (xy 103.65 106.95) + (xy 103.65 106.85) + (xy 103.55 106.85) + (xy 103.55 106.75) + (xy 103.45 106.75) + (xy 103.45 106.65) + (xy 103.35 106.65) + (xy 103.35 106.45) + (xy 103.25 106.45) + (xy 103.25 106.25) + (xy 103.15 106.25) + (xy 103.15 105.55) + (xy 103.25 105.55) + (xy 103.25 105.35) + (xy 103.35 105.35) + (xy 103.35 105.15) + (xy 103.45 105.15) + (xy 103.45 105.05) + (xy 103.55 105.05) + (xy 103.55 104.95) + (xy 103.65 104.95) + (xy 103.65 104.85) + (xy 103.55 104.85) + (xy 103.55 104.75) + (xy 103.45 104.75) + (xy 103.45 104.65) + (xy 103.35 104.65) + (xy 103.35 104.55) + (xy 103.25 104.55) + (xy 103.25 104.45) + (xy 103.15 104.45) + (xy 103.15 102.35) + (xy 103.25 102.35) + (xy 103.25 102.25) + (xy 103.35 102.25) + (xy 103.35 102.15) + (xy 105.65 102.15) + (xy 105.65 102.25) + (xy 105.75 102.25) + (xy 105.75 102.35) + (xy 105.85 102.35) + (xy 105.85 102.45) + (xy 105.95 102.45) + (xy 105.95 102.55) + (xy 106.05 102.55) + (xy 106.05 102.65) + (xy 119.05 102.65) + (xy 119.05 102.55) + (xy 119.15 102.55) + (xy 119.15 102.45) + (xy 119.25 102.45) + (xy 119.25 102.25) + (xy 119.15 102.25) + (xy 119.15 101.55) + (xy 119.25 101.55) + (xy 119.25 101.35) + (xy 119.35 101.35) + (xy 119.35 101.15) + (xy 119.45 101.15) + (xy 119.45 101.05) + (xy 119.55 101.05) + (xy 119.55 100.95) + (xy 119.65 100.95) + (xy 119.65 100.85) + (xy 119.75 100.85) + (xy 119.75 100.75) + (xy 119.65 100.75) + (xy 119.65 100.65) + (xy 119.55 100.65) + (xy 119.55 100.55) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 121.05 100.55) + (xy 121.05 100.65) + (xy 120.95 100.65) + (xy 120.95 100.75) + (xy 120.85 100.75) + (xy 120.85 100.85) + (xy 120.95 100.85) + (xy 120.95 100.95) + (xy 121.05 100.95) + (xy 121.05 101.05) + (xy 121.15 101.05) + (xy 121.15 101.15) + (xy 121.25 101.15) + (xy 121.25 101.25) + (xy 121.35 101.25) + (xy 121.35 101.45) + (xy 121.45 101.45) + (xy 121.45 101.85) + (xy 121.55 101.85) + (xy 121.55 101.95) + (xy 121.45 101.95) + (xy 121.45 102.35) + (xy 121.35 102.35) + (xy 121.35 102.55) + (xy 121.25 102.55) + (xy 121.25 102.65) + (xy 121.15 102.65) + (xy 121.15 102.75) + (xy 121.05 102.75) + (xy 121.05 104.15) + (xy 121.15 104.15) + (xy 121.15 104.25) + (xy 121.25 104.25) + (xy 121.25 106.55) + (xy 121.15 106.55) + (xy 121.15 106.65) + (xy 120.75 106.65) + (xy 120.75 106.75) + (xy 120.65 106.75) + (xy 120.65 106.85) + (xy 120.55 106.85) + (xy 120.55 108.85) + (xy 120.65 108.85) + (xy 120.65 108.95) + (xy 120.75 108.95) + (xy 120.75 109.05) + (xy 122.25 109.05) + (xy 122.25 108.95) + (xy 122.35 108.95) + (xy 122.35 108.85) + (xy 122.45 108.85) + (xy 122.45 108.75) + (xy 122.55 108.75) + (xy 122.55 108.65) + (xy 122.65 108.65) + (xy 122.65 108.55) + (xy 122.75 108.55) + (xy 122.75 108.45) + (xy 122.85 108.45) + (xy 122.85 108.35) + (xy 122.95 108.35) + (xy 122.95 108.25) + (xy 123.05 108.25) + (xy 123.05 108.15) + (xy 123.15 108.15) + (xy 123.15 108.05) + (xy 123.25 108.05) + (xy 123.25 107.95) + (xy 123.35 107.95) + (xy 123.35 107.85) + (xy 123.45 107.85) + (xy 123.45 107.75) + (xy 123.55 107.75) + (xy 123.55 107.65) + (xy 123.65 107.65) + (xy 123.65 107.55) + (xy 123.75 107.55) + (xy 123.75 107.45) + (xy 123.85 107.45) + (xy 123.85 107.35) + (xy 123.95 107.35) + (xy 123.95 107.25) + (xy 124.05 107.25) + (xy 124.05 107.15) + (xy 124.15 107.15) + (xy 124.15 107.05) + (xy 124.25 107.05) + (xy 124.25 106.95) + (xy 124.35 106.95) + (xy 124.35 106.85) + (xy 124.45 106.85) + (xy 124.45 106.75) + (xy 124.55 106.75) + (xy 124.55 106.65) + (xy 124.65 106.65) + (xy 124.65 106.55) + (xy 124.75 106.55) + (xy 124.75 106.45) + (xy 124.85 106.45) + (xy 124.85 106.35) + (xy 124.95 106.35) + (xy 124.95 106.25) + (xy 125.05 106.25) + (xy 125.05 106.15) + (xy 125.15 106.15) + (xy 125.15 106.05) + (xy 125.25 106.05) + (xy 125.25 105.95) + (xy 125.35 105.95) + (xy 125.35 105.85) + (xy 125.45 105.85) + (xy 125.45 105.75) + (xy 125.55 105.75) + (xy 125.55 105.65) + (xy 125.65 105.65) + (xy 125.65 105.55) + (xy 125.75 105.55) + (xy 125.75 105.45) + (xy 125.85 105.45) + (xy 125.85 105.35) + (xy 125.95 105.35) + (xy 125.95 105.25) + (xy 126.05 105.25) + (xy 126.05 105.15) + (xy 126.15 105.15) + (xy 126.15 105.05) + (xy 126.25 105.05) + (xy 126.25 104.95) + (xy 126.35 104.95) + (xy 126.35 104.85) + (xy 126.45 104.85) + (xy 126.45 104.75) + (xy 126.55 104.75) + (xy 126.55 104.65) + (xy 126.65 104.65) + (xy 126.65 104.55) + (xy 126.75 104.55) + (xy 126.75 104.45) + (xy 126.85 104.45) + (xy 126.85 104.35) + (xy 126.95 104.35) + (xy 126.95 104.25) + (xy 127.05 104.25) + (xy 127.05 104.15) + (xy 127.15 104.15) + (xy 127.15 104.05) + (xy 127.25 104.05) + (xy 127.25 103.95) + (xy 127.35 103.95) + (xy 127.35 103.85) + (xy 127.45 103.85) + (xy 127.45 103.75) + (xy 127.55 103.75) + (xy 127.55 103.65) + (xy 127.65 103.65) + (xy 127.65 103.55) + (xy 127.75 103.55) + (xy 127.75 103.45) + (xy 127.85 103.45) + (xy 127.85 103.35) + (xy 127.95 103.35) + (xy 127.95 103.25) + (xy 127.85 103.25) + (xy 127.85 103.15) + (xy 127.75 103.15) + (xy 127.75 103.05) + (xy 127.55 103.05) + (xy 127.55 102.95) + (xy 127.35 102.95) + (xy 127.35 102.85) + (xy 127.15 102.85) + (xy 127.15 102.75) + (xy 127.05 102.75) + (xy 127.05 102.65) + (xy 126.95 102.65) + (xy 126.95 102.45) + (xy 126.85 102.45) + (xy 126.85 102.35) + (xy 126.75 102.35) + (xy 126.75 102.25) + (xy 126.65 102.25) + (xy 126.65 102.35) + (xy 126.55 102.35) + (xy 126.55 102.45) + (xy 126.45 102.45) + (xy 126.45 102.55) + (xy 126.35 102.55) + (xy 126.35 102.65) + (xy 126.25 102.65) + (xy 126.25 102.75) + (xy 126.15 102.75) + (xy 126.15 102.85) + (xy 126.05 102.85) + (xy 126.05 102.95) + (xy 125.85 102.95) + (xy 125.85 103.05) + (xy 124.95 103.05) + (xy 124.95 102.95) + (xy 124.75 102.95) + (xy 124.75 102.85) + (xy 124.65 102.85) + (xy 124.65 102.75) + (xy 124.55 102.75) + (xy 124.55 102.65) + (xy 124.45 102.65) + (xy 124.45 102.55) + (xy 124.35 102.55) + (xy 124.35 102.35) + (xy 124.25 102.35) + (xy 124.25 101.45) + (xy 124.35 101.45) + (xy 124.35 101.25) + (xy 124.45 101.25) + (xy 124.45 101.15) + (xy 124.55 101.15) + (xy 124.55 101.05) + (xy 124.65 101.05) + (xy 124.65 100.95) + (xy 124.75 100.95) + (xy 124.75 100.85) + (xy 124.85 100.85) + (xy 124.85 100.75) + (xy 124.75 100.75) + (xy 124.75 100.65) + (xy 124.65 100.65) + (xy 124.65 100.55) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 157.35 100.55) + (xy 157.35 100.65) + (xy 157.25 100.65) + (xy 157.25 100.75) + (xy 157.15 100.75) + (xy 157.15 100.85) + (xy 157.25 100.85) + (xy 157.25 100.95) + (xy 157.35 100.95) + (xy 157.35 101.05) + (xy 157.45 101.05) + (xy 157.45 101.15) + (xy 157.55 101.15) + (xy 157.55 101.35) + (xy 157.65 101.35) + (xy 157.65 101.55) + (xy 157.75 101.55) + (xy 157.75 102.25) + (xy 157.65 102.25) + (xy 157.65 102.45) + (xy 157.75 102.45) + (xy 157.75 102.55) + (xy 157.85 102.55) + (xy 157.85 102.65) + (xy 174.95 102.65) + (xy 174.95 102.55) + (xy 175.05 102.55) + (xy 175.05 102.45) + (xy 175.15 102.45) + (xy 175.15 102.35) + (xy 175.25 102.35) + (xy 175.25 102.25) + (xy 175.35 102.25) + (xy 175.35 102.15) + (xy 177.65 102.15) + (xy 177.65 102.25) + (xy 177.75 102.25) + (xy 177.75 102.35) + (xy 177.85 102.35) + (xy 177.85 104.45) + (xy 177.75 104.45) + (xy 177.75 104.55) + (xy 177.65 104.55) + (xy 177.65 104.65) + (xy 177.55 104.65) + (xy 177.55 104.75) + (xy 177.45 104.75) + (xy 177.45 104.85) + (xy 177.35 104.85) + (xy 177.35 104.95) + (xy 177.45 104.95) + (xy 177.45 105.05) + (xy 177.55 105.05) + (xy 177.55 105.15) + (xy 177.65 105.15) + (xy 177.65 105.35) + (xy 177.75 105.35) + (xy 177.75 105.55) + (xy 177.85 105.55) + (xy 177.85 106.25) + (xy 177.75 106.25) + (xy 177.75 106.45) + (xy 177.65 106.45) + (xy 177.65 106.65) + (xy 177.55 106.65) + (xy 177.55 106.75) + (xy 177.45 106.75) + (xy 177.45 106.85) + (xy 177.35 106.85) + (xy 177.35 106.95) + (xy 177.25 106.95) + (xy 177.25 107.05) + (xy 177.15 107.05) + (xy 177.15 107.25) + (xy 177.25 107.25) + (xy 177.25 107.35) + (xy 177.35 107.35) + (xy 177.35 107.45) + (xy 177.45 107.45) + (xy 177.45 107.55) + (xy 177.55 107.55) + (xy 177.55 107.65) + (xy 177.65 107.65) + (xy 177.65 107.85) + (xy 177.75 107.85) + (xy 177.75 108.05) + (xy 177.85 108.05) + (xy 177.85 108.75) + (xy 177.75 108.75) + (xy 177.75 108.95) + (xy 177.65 108.95) + (xy 177.65 109.15) + (xy 177.55 109.15) + (xy 177.55 109.25) + (xy 177.45 109.25) + (xy 177.45 109.35) + (xy 177.35 109.35) + (xy 177.35 109.45) + (xy 177.25 109.45) + (xy 177.25 109.55) + (xy 177.15 109.55) + (xy 177.15 109.75) + (xy 177.25 109.75) + (xy 177.25 109.85) + (xy 177.35 109.85) + (xy 177.35 109.95) + (xy 177.45 109.95) + (xy 177.45 110.05) + (xy 177.55 110.05) + (xy 177.55 110.15) + (xy 177.65 110.15) + (xy 177.65 110.35) + (xy 177.75 110.35) + (xy 177.75 110.55) + (xy 177.85 110.55) + (xy 177.85 111.25) + (xy 177.75 111.25) + (xy 177.75 111.45) + (xy 177.65 111.45) + (xy 177.65 111.65) + (xy 177.55 111.65) + (xy 177.55 111.75) + (xy 177.45 111.75) + (xy 177.45 111.85) + (xy 177.35 111.85) + (xy 177.35 111.95) + (xy 177.15 111.95) + (xy 177.15 112.05) + (xy 176.85 112.05) + (xy 176.85 112.15) + (xy 176.15 112.15) + (xy 176.15 112.05) + (xy 175.85 112.05) + (xy 175.85 111.95) + (xy 175.65 111.95) + (xy 175.65 111.85) + (xy 175.55 111.85) + (xy 175.55 111.75) + (xy 175.45 111.75) + (xy 175.45 111.65) + (xy 175.35 111.65) + (xy 175.35 111.45) + (xy 175.25 111.45) + (xy 175.25 111.35) + (xy 175.15 111.35) + (xy 175.15 111.25) + (xy 155.35 111.25) + (xy 155.35 111.15) + (xy 155.15 111.15) + (xy 155.15 111.05) + (xy 155.05 111.05) + (xy 155.05 110.95) + (xy 154.95 110.95) + (xy 154.95 110.85) + (xy 154.85 110.85) + (xy 154.85 110.75) + (xy 154.75 110.75) + (xy 154.75 110.65) + (xy 154.65 110.65) + (xy 154.65 110.55) + (xy 154.55 110.55) + (xy 154.55 110.45) + (xy 154.45 110.45) + (xy 154.45 110.35) + (xy 154.35 110.35) + (xy 154.35 110.25) + (xy 154.25 110.25) + (xy 154.25 110.15) + (xy 154.15 110.15) + (xy 154.15 110.05) + (xy 154.05 110.05) + (xy 154.05 109.95) + (xy 153.95 109.95) + (xy 153.95 109.85) + (xy 153.85 109.85) + (xy 153.85 109.75) + (xy 153.75 109.75) + (xy 153.75 109.65) + (xy 153.65 109.65) + (xy 153.65 109.55) + (xy 153.55 109.55) + (xy 153.55 109.45) + (xy 153.45 109.45) + (xy 153.45 109.35) + (xy 153.35 109.35) + (xy 153.35 109.25) + (xy 153.25 109.25) + (xy 153.25 109.15) + (xy 153.15 109.15) + (xy 153.15 109.05) + (xy 153.05 109.05) + (xy 153.05 108.95) + (xy 152.95 108.95) + (xy 152.95 108.85) + (xy 152.85 108.85) + (xy 152.85 108.75) + (xy 152.75 108.75) + (xy 152.75 108.65) + (xy 152.65 108.65) + (xy 152.65 108.55) + (xy 152.55 108.55) + (xy 152.55 108.45) + (xy 152.45 108.45) + (xy 152.45 108.35) + (xy 152.35 108.35) + (xy 152.35 108.25) + (xy 152.25 108.25) + (xy 152.25 108.15) + (xy 152.15 108.15) + (xy 152.15 108.05) + (xy 152.05 108.05) + (xy 152.05 107.95) + (xy 151.95 107.95) + (xy 151.95 107.85) + (xy 151.85 107.85) + (xy 151.85 107.75) + (xy 151.75 107.75) + (xy 151.75 107.65) + (xy 151.65 107.65) + (xy 151.65 107.55) + (xy 151.55 107.55) + (xy 151.55 107.45) + (xy 151.45 107.45) + (xy 151.45 107.35) + (xy 151.35 107.35) + (xy 151.35 107.25) + (xy 151.25 107.25) + (xy 151.25 107.15) + (xy 151.15 107.15) + (xy 151.15 107.05) + (xy 151.05 107.05) + (xy 151.05 106.95) + (xy 150.95 106.95) + (xy 150.95 106.85) + (xy 150.85 106.85) + (xy 150.85 106.75) + (xy 150.75 106.75) + (xy 150.75 106.65) + (xy 150.65 106.65) + (xy 150.65 106.55) + (xy 150.55 106.55) + (xy 150.55 106.45) + (xy 150.45 106.45) + (xy 150.45 106.35) + (xy 150.35 106.35) + (xy 150.35 106.25) + (xy 150.25 106.25) + (xy 150.25 106.15) + (xy 150.15 106.15) + (xy 150.15 106.05) + (xy 150.05 106.05) + (xy 150.05 105.95) + (xy 149.95 105.95) + (xy 149.95 105.85) + (xy 149.85 105.85) + (xy 149.85 105.75) + (xy 149.75 105.75) + (xy 149.75 105.65) + (xy 149.65 105.65) + (xy 149.65 105.55) + (xy 149.55 105.55) + (xy 149.55 105.45) + (xy 149.45 105.45) + (xy 149.45 105.35) + (xy 149.35 105.35) + (xy 149.35 105.25) + (xy 149.25 105.25) + (xy 149.25 105.15) + (xy 149.15 105.15) + (xy 149.15 105.05) + (xy 149.05 105.05) + (xy 149.05 104.95) + (xy 148.95 104.95) + (xy 148.95 104.85) + (xy 148.85 104.85) + (xy 148.85 104.75) + (xy 148.75 104.75) + (xy 148.75 104.65) + (xy 148.65 104.65) + (xy 148.65 104.55) + (xy 148.55 104.55) + (xy 148.55 104.45) + (xy 148.45 104.45) + (xy 148.45 104.35) + (xy 148.35 104.35) + (xy 148.35 104.25) + (xy 148.25 104.25) + (xy 148.25 104.15) + (xy 148.15 104.15) + (xy 148.15 104.05) + (xy 148.05 104.05) + (xy 148.05 103.95) + (xy 147.95 103.95) + (xy 147.95 103.85) + (xy 147.85 103.85) + (xy 147.85 103.75) + (xy 147.75 103.75) + (xy 147.75 103.65) + (xy 147.65 103.65) + (xy 147.65 103.55) + (xy 147.55 103.55) + (xy 147.55 103.45) + (xy 147.45 103.45) + (xy 147.45 103.35) + (xy 147.35 103.35) + (xy 147.35 103.25) + (xy 147.25 103.25) + (xy 147.25 103.15) + (xy 147.15 103.15) + (xy 147.15 103.05) + (xy 147.05 103.05) + (xy 147.05 102.95) + (xy 146.85 102.95) + (xy 146.85 103.05) + (xy 145.95 103.05) + (xy 145.95 102.95) + (xy 145.75 102.95) + (xy 145.75 102.85) + (xy 145.65 102.85) + (xy 145.65 102.75) + (xy 145.55 102.75) + (xy 145.55 102.65) + (xy 145.45 102.65) + (xy 145.45 102.55) + (xy 145.35 102.55) + (xy 145.35 102.35) + (xy 145.25 102.35) + (xy 145.25 101.45) + (xy 145.35 101.45) + (xy 145.35 101.35) + (xy 145.25 101.35) + (xy 145.25 101.25) + (xy 145.15 101.25) + (xy 145.15 101.15) + (xy 142.55 101.15) + (xy 142.55 101.25) + (xy 142.45 101.25) + (xy 142.45 101.35) + (xy 142.35 101.35) + (xy 142.35 101.45) + (xy 142.45 101.45) + (xy 142.45 101.85) + (xy 142.55 101.85) + (xy 142.55 101.95) + (xy 142.45 101.95) + (xy 142.45 102.35) + (xy 142.35 102.35) + (xy 142.35 102.55) + (xy 142.25 102.55) + (xy 142.25 102.65) + (xy 142.15 102.65) + (xy 142.15 102.75) + (xy 142.05 102.75) + (xy 142.05 104.15) + (xy 142.15 104.15) + (xy 142.15 104.25) + (xy 142.25 104.25) + (xy 142.25 106.55) + (xy 142.15 106.55) + (xy 142.15 106.65) + (xy 141.55 106.65) + (xy 141.55 106.75) + (xy 141.45 106.75) + (xy 141.45 106.85) + (xy 141.35 106.85) + (xy 141.35 106.95) + (xy 141.25 106.95) + (xy 141.25 107.05) + (xy 141.15 107.05) + (xy 141.15 107.15) + (xy 141.05 107.15) + (xy 141.05 107.25) + (xy 140.95 107.25) + (xy 140.95 107.35) + (xy 140.85 107.35) + (xy 140.85 107.45) + (xy 140.75 107.45) + (xy 140.75 107.55) + (xy 140.65 107.55) + (xy 140.65 107.65) + (xy 140.55 107.65) + (xy 140.55 107.75) + (xy 140.45 107.75) + (xy 140.45 113.35) + (xy 140.55 113.35) + (xy 140.55 113.45) + (xy 140.65 113.45) + (xy 140.65 113.55) + (xy 140.85 113.55) + (xy 140.85 113.45) + (xy 141.75 113.45) + (xy 141.75 113.55) + (xy 141.95 113.55) + (xy 141.95 113.65) + (xy 142.05 113.65) + (xy 142.05 113.75) + (xy 142.15 113.75) + (xy 142.15 113.85) + (xy 142.25 113.85) + (xy 142.25 113.95) + (xy 142.35 113.95) + (xy 142.35 114.05) + (xy 142.45 114.05) + (xy 142.45 114.15) + (xy 142.55 114.15) + (xy 142.55 114.25) + (xy 142.65 114.25) + (xy 142.65 114.15) + (xy 142.75 114.15) + (xy 142.75 114.05) + (xy 142.85 114.05) + (xy 142.85 113.95) + (xy 142.95 113.95) + (xy 142.95 113.75) + (xy 143.05 113.75) + (xy 143.05 113.65) + (xy 143.25 113.65) + (xy 143.25 113.55) + (xy 143.45 113.55) + (xy 143.45 113.45) + (xy 144.25 113.45) + (xy 144.25 113.55) + (xy 144.45 113.55) + (xy 144.45 113.65) + (xy 144.65 113.65) + (xy 144.65 113.75) + (xy 144.75 113.75) + (xy 144.75 113.85) + (xy 144.85 113.85) + (xy 144.85 113.95) + (xy 144.95 113.95) + (xy 144.95 114.05) + (xy 145.35 114.05) + (xy 145.35 113.95) + (xy 145.45 113.95) + (xy 145.45 113.85) + (xy 145.55 113.85) + (xy 145.55 113.75) + (xy 145.65 113.75) + (xy 145.65 113.65) + (xy 145.75 113.65) + (xy 145.75 113.55) + (xy 145.95 113.55) + (xy 145.95 113.45) + (xy 146.85 113.45) + (xy 146.85 113.55) + (xy 147.05 113.55) + (xy 147.05 113.65) + (xy 147.15 113.65) + (xy 147.15 113.75) + (xy 147.25 113.75) + (xy 147.25 113.85) + (xy 147.35 113.85) + (xy 147.35 113.95) + (xy 147.45 113.95) + (xy 147.45 114.05) + (xy 147.85 114.05) + (xy 147.85 113.95) + (xy 147.95 113.95) + (xy 147.95 113.85) + (xy 148.05 113.85) + (xy 148.05 113.75) + (xy 148.15 113.75) + (xy 148.15 113.65) + (xy 148.35 113.65) + (xy 148.35 113.55) + (xy 148.55 113.55) + (xy 148.55 113.45) + (xy 149.35 113.45) + (xy 149.35 113.55) + (xy 149.55 113.55) + (xy 149.55 113.65) + (xy 149.75 113.65) + (xy 149.75 113.75) + (xy 149.85 113.75) + (xy 149.85 113.85) + (xy 149.95 113.85) + (xy 149.95 113.95) + (xy 150.05 113.95) + (xy 150.05 114.05) + (xy 150.45 114.05) + (xy 150.45 113.95) + (xy 150.55 113.95) + (xy 150.55 113.85) + (xy 150.65 113.85) + (xy 150.65 113.75) + (xy 150.75 113.75) + (xy 150.75 113.65) + (xy 150.85 113.65) + (xy 150.85 113.55) + (xy 151.05 113.55) + (xy 151.05 113.45) + (xy 151.95 113.45) + (xy 151.95 113.55) + (xy 152.15 113.55) + (xy 152.15 113.65) + (xy 152.25 113.65) + (xy 152.25 113.75) + (xy 152.35 113.75) + (xy 152.35 113.85) + (xy 152.45 113.85) + (xy 152.45 113.95) + (xy 152.55 113.95) + (xy 152.55 114.05) + (xy 152.95 114.05) + (xy 152.95 113.95) + (xy 153.05 113.95) + (xy 153.05 113.85) + (xy 153.15 113.85) + (xy 153.15 113.75) + (xy 153.25 113.75) + (xy 153.25 113.65) + (xy 153.35 113.65) + (xy 153.35 113.55) + (xy 153.55 113.55) + (xy 153.55 113.45) + (xy 154.45 113.45) + (xy 154.45 113.55) + (xy 154.65 113.55) + (xy 154.65 113.65) + (xy 154.75 113.65) + (xy 154.75 113.75) + (xy 154.85 113.75) + (xy 154.85 113.85) + (xy 154.95 113.85) + (xy 154.95 113.95) + (xy 155.05 113.95) + (xy 155.05 114.05) + (xy 155.15 114.05) + (xy 155.15 114.15) + (xy 155.25 114.15) + (xy 155.25 114.25) + (xy 155.35 114.25) + (xy 155.35 114.15) + (xy 155.45 114.15) + (xy 155.45 114.05) + (xy 155.55 114.05) + (xy 155.55 113.95) + (xy 155.65 113.95) + (xy 155.65 113.75) + (xy 155.75 113.75) + (xy 155.75 113.65) + (xy 155.95 113.65) + (xy 155.95 113.55) + (xy 156.15 113.55) + (xy 156.15 113.45) + (xy 156.95 113.45) + (xy 156.95 113.55) + (xy 157.15 113.55) + (xy 157.15 113.65) + (xy 157.35 113.65) + (xy 157.35 113.75) + (xy 157.45 113.75) + (xy 157.45 113.85) + (xy 157.55 113.85) + (xy 157.55 114.05) + (xy 157.65 114.05) + (xy 157.65 114.15) + (xy 157.75 114.15) + (xy 157.75 114.25) + (xy 157.85 114.25) + (xy 157.85 114.15) + (xy 157.95 114.15) + (xy 157.95 114.05) + (xy 158.05 114.05) + (xy 158.05 113.95) + (xy 158.15 113.95) + (xy 158.15 113.85) + (xy 158.25 113.85) + (xy 158.25 113.75) + (xy 158.35 113.75) + (xy 158.35 113.65) + (xy 158.45 113.65) + (xy 158.45 113.55) + (xy 158.65 113.55) + (xy 158.65 113.45) + (xy 159.55 113.45) + (xy 159.55 113.55) + (xy 159.75 113.55) + (xy 159.75 113.65) + (xy 159.85 113.65) + (xy 159.85 113.75) + (xy 159.95 113.75) + (xy 159.95 113.85) + (xy 160.05 113.85) + (xy 160.05 113.95) + (xy 160.15 113.95) + (xy 160.15 114.15) + (xy 160.25 114.15) + (xy 160.25 115.05) + (xy 160.15 115.05) + (xy 160.15 115.15) + (xy 160.25 115.15) + (xy 160.25 115.25) + (xy 160.35 115.25) + (xy 160.35 115.35) + (xy 162.95 115.35) + (xy 162.95 115.25) + (xy 163.95 115.25) + (xy 163.95 115.35) + (xy 164.05 115.35) + (xy 164.05 115.45) + (xy 164.15 115.45) + (xy 164.15 116.05) + (xy 164.25 116.05) + (xy 164.25 116.15) + (xy 164.35 116.15) + (xy 164.35 116.25) + (xy 164.45 116.25) + (xy 164.45 116.15) + (xy 164.55 116.15) + (xy 164.55 116.05) + (xy 164.65 116.05) + (xy 164.65 115.95) + (xy 164.75 115.95) + (xy 164.75 115.85) + (xy 164.85 115.85) + (xy 164.85 115.45) + (xy 164.95 115.45) + (xy 164.95 115.35) + (xy 165.05 115.35) + (xy 165.05 115.25) + (xy 166.05 115.25) + (xy 166.05 115.35) + (xy 166.15 115.35) + (xy 166.15 115.45) + (xy 166.25 115.45) + (xy 166.25 116.25) + (xy 166.15 116.25) + (xy 166.15 116.35) + (xy 166.05 116.35) + (xy 166.05 116.45) + (xy 165.45 116.45) + (xy 165.45 116.55) + (xy 165.35 116.55) + (xy 165.35 116.65) + (xy 165.25 116.65) + (xy 165.25 116.75) + (xy 165.15 116.75) + (xy 165.15 116.85) + (xy 165.05 116.85) + (xy 165.05 116.95) + (xy 164.95 116.95) + (xy 164.95 117.05) + (xy 164.85 117.05) + (xy 164.85 117.25) + (xy 164.95 117.25) + (xy 164.95 117.35) + (xy 165.05 117.35) + (xy 165.05 117.45) + (xy 165.15 117.45) + (xy 165.15 117.35) + (xy 165.95 117.35) + (xy 165.95 117.45) + (xy 166.15 117.45) + (xy 166.15 117.65) + (xy 166.25 117.65) + (xy 166.25 118.05) + (xy 166.35 118.05) + (xy 166.35 118.15) + (xy 166.45 118.15) + (xy 166.45 118.25) + (xy 174.95 118.25) + (xy 174.95 118.15) + (xy 175.05 118.15) + (xy 175.05 118.05) + (xy 175.15 118.05) + (xy 175.15 117.45) + (xy 175.25 117.45) + (xy 175.25 117.35) + (xy 175.35 117.35) + (xy 175.35 117.25) + (xy 177.65 117.25) + (xy 177.65 117.35) + (xy 177.75 117.35) + (xy 177.75 117.45) + (xy 177.85 117.45) + (xy 177.85 119.55) + (xy 177.75 119.55) + (xy 177.75 119.65) + (xy 177.65 119.65) + (xy 177.65 119.75) + (xy 177.55 119.75) + (xy 177.55 119.85) + (xy 177.45 119.85) + (xy 177.45 119.95) + (xy 177.35 119.95) + (xy 177.35 120.05) + (xy 177.45 120.05) + (xy 177.45 120.15) + (xy 177.55 120.15) + (xy 177.55 120.25) + (xy 177.65 120.25) + (xy 177.65 120.45) + (xy 177.75 120.45) + (xy 177.75 120.65) + (xy 177.85 120.65) + (xy 177.85 121.35) + (xy 177.75 121.35) + (xy 177.75 121.55) + (xy 177.65 121.55) + (xy 177.65 121.75) + (xy 177.55 121.75) + (xy 177.55 121.85) + (xy 177.45 121.85) + (xy 177.45 121.95) + (xy 177.35 121.95) + (xy 177.35 122.05) + (xy 177.15 122.05) + (xy 177.15 122.15) + (xy 176.85 122.15) + (xy 176.85 122.25) + (xy 176.15 122.25) + (xy 176.15 122.15) + (xy 175.85 122.15) + (xy 175.85 122.05) + (xy 175.65 122.05) + (xy 175.65 121.95) + (xy 175.55 121.95) + (xy 175.55 121.85) + (xy 175.45 121.85) + (xy 175.45 121.75) + (xy 175.35 121.75) + (xy 175.35 121.55) + (xy 175.25 121.55) + (xy 175.25 121.35) + (xy 175.15 121.35) + (xy 175.15 121.25) + (xy 175.05 121.25) + (xy 175.05 121.15) + (xy 167.65 121.15) + (xy 167.65 121.25) + (xy 167.55 121.25) + (xy 167.55 121.35) + (xy 167.45 121.35) + (xy 167.45 121.45) + (xy 167.55 121.45) + (xy 167.55 121.55) + (xy 167.65 121.55) + (xy 167.65 121.75) + (xy 167.75 121.75) + (xy 167.75 121.85) + (xy 167.85 121.85) + (xy 167.85 122.15) + (xy 167.95 122.15) + (xy 167.95 122.45) + (xy 168.05 122.45) + (xy 168.05 123.05) + (xy 167.95 123.05) + (xy 167.95 123.45) + (xy 167.85 123.45) + (xy 167.85 123.65) + (xy 167.75 123.65) + (xy 167.75 123.85) + (xy 167.65 123.85) + (xy 167.65 123.95) + (xy 167.55 123.95) + (xy 167.55 124.15) + (xy 167.45 124.15) + (xy 167.45 124.25) + (xy 167.35 124.25) + (xy 167.35 124.35) + (xy 167.15 124.35) + (xy 167.15 124.45) + (xy 167.05 124.45) + (xy 167.05 124.55) + (xy 166.85 124.55) + (xy 166.85 124.65) + (xy 166.55 124.65) + (xy 166.55 124.75) + (xy 165.55 124.75) + (xy 165.55 124.65) + (xy 165.25 124.65) + (xy 165.25 124.55) + (xy 165.05 124.55) + (xy 165.05 124.45) + (xy 164.95 124.45) + (xy 164.95 124.35) + (xy 164.75 124.35) + (xy 164.75 124.25) + (xy 164.65 124.25) + (xy 164.65 124.15) + (xy 164.55 124.15) + (xy 164.55 124.05) + (xy 164.45 124.05) + (xy 164.45 123.85) + (xy 164.35 123.85) + (xy 164.35 123.75) + (xy 164.25 123.75) + (xy 164.25 123.55) + (xy 164.15 123.55) + (xy 164.15 123.15) + (xy 164.05 123.15) + (xy 164.05 122.35) + (xy 164.15 122.35) + (xy 164.15 122.05) + (xy 164.25 122.05) + (xy 164.25 121.85) + (xy 164.35 121.85) + (xy 164.35 121.65) + (xy 164.45 121.65) + (xy 164.45 121.55) + (xy 164.55 121.55) + (xy 164.55 121.45) + (xy 164.65 121.45) + (xy 164.65 121.35) + (xy 164.75 121.35) + (xy 164.75 121.25) + (xy 164.85 121.25) + (xy 164.85 121.15) + (xy 164.75 121.15) + (xy 164.75 121.05) + (xy 164.65 121.05) + (xy 164.65 120.95) + (xy 164.55 120.95) + (xy 164.55 120.85) + (xy 164.45 120.85) + (xy 164.45 120.75) + (xy 164.35 120.75) + (xy 164.35 120.65) + (xy 164.25 120.65) + (xy 164.25 120.55) + (xy 164.15 120.55) + (xy 164.15 120.45) + (xy 164.05 120.45) + (xy 164.05 120.35) + (xy 163.95 120.35) + (xy 163.95 120.25) + (xy 163.85 120.25) + (xy 163.85 120.15) + (xy 163.75 120.15) + (xy 163.75 120.05) + (xy 163.65 120.05) + (xy 163.65 119.95) + (xy 163.55 119.95) + (xy 163.55 119.85) + (xy 163.45 119.85) + (xy 163.45 119.75) + (xy 163.35 119.75) + (xy 163.35 119.65) + (xy 163.25 119.65) + (xy 163.25 119.55) + (xy 163.15 119.55) + (xy 163.15 119.45) + (xy 163.05 119.45) + (xy 163.05 119.35) + (xy 162.95 119.35) + (xy 162.95 119.25) + (xy 162.85 119.25) + (xy 162.85 119.15) + (xy 162.75 119.15) + (xy 162.75 119.05) + (xy 162.65 119.05) + (xy 162.65 118.95) + (xy 162.55 118.95) + (xy 162.55 118.85) + (xy 162.45 118.85) + (xy 162.45 118.75) + (xy 162.35 118.75) + (xy 162.35 118.65) + (xy 162.25 118.65) + (xy 162.25 118.25) + (xy 162.15 118.25) + (xy 162.15 118.15) + (xy 162.05 118.15) + (xy 162.05 118.05) + (xy 161.25 118.05) + (xy 161.25 118.15) + (xy 161.15 118.15) + (xy 161.15 118.25) + (xy 161.05 118.25) + (xy 161.05 118.75) + (xy 161.15 118.75) + (xy 161.15 118.85) + (xy 161.25 118.85) + (xy 161.25 118.95) + (xy 161.35 118.95) + (xy 161.35 119.05) + (xy 161.45 119.05) + (xy 161.45 119.15) + (xy 161.55 119.15) + (xy 161.55 119.85) + (xy 161.45 119.85) + (xy 161.45 119.95) + (xy 161.35 119.95) + (xy 161.35 120.05) + (xy 161.25 120.05) + (xy 161.25 120.15) + (xy 161.15 120.15) + (xy 161.15 120.25) + (xy 161.05 120.25) + (xy 161.05 123.55) + (xy 161.15 123.55) + (xy 161.15 123.65) + (xy 161.25 123.65) + (xy 161.25 123.75) + (xy 161.35 123.75) + (xy 161.35 123.85) + (xy 161.45 123.85) + (xy 161.45 123.95) + (xy 161.55 123.95) + (xy 161.55 124.05) + (xy 161.95 124.05) + (xy 161.95 124.15) + (xy 162.05 124.15) + (xy 162.05 124.25) + (xy 162.15 124.25) + (xy 162.15 124.35) + (xy 162.25 124.35) + (xy 162.25 125.05) + (xy 162.15 125.05) + (xy 162.15 125.15) + (xy 162.05 125.15) + (xy 162.05 125.25) + (xy 161.95 125.25) + (xy 161.95 125.45) + (xy 162.05 125.45) + (xy 162.05 125.55) + (xy 162.15 125.55) + (xy 162.15 125.65) + (xy 162.25 125.65) + (xy 162.25 125.75) + (xy 162.35 125.75) + (xy 162.35 125.85) + (xy 162.45 125.85) + (xy 162.45 125.95) + (xy 162.55 125.95) + (xy 162.55 126.05) + (xy 162.65 126.05) + (xy 162.65 126.15) + (xy 162.75 126.15) + (xy 162.75 126.25) + (xy 162.85 126.25) + (xy 162.85 126.35) + (xy 162.95 126.35) + (xy 162.95 126.45) + (xy 163.05 126.45) + (xy 163.05 126.55) + (xy 163.15 126.55) + (xy 163.15 126.65) + (xy 163.25 126.65) + (xy 163.25 126.75) + (xy 171.05 126.75) + (xy 171.05 126.65) + (xy 171.15 126.65) + (xy 171.15 126.55) + (xy 171.85 126.55) + (xy 171.85 126.65) + (xy 171.95 126.65) + (xy 171.95 126.75) + (xy 172.05 126.75) + (xy 172.05 126.85) + (xy 172.15 126.85) + (xy 172.15 127.25) + (xy 172.25 127.25) + (xy 172.25 127.35) + (xy 172.35 127.35) + (xy 172.35 127.45) + (xy 175.25 127.45) + (xy 175.25 127.55) + (xy 175.35 127.55) + (xy 175.35 127.65) + (xy 175.45 127.65) + (xy 175.45 127.75) + (xy 175.55 127.75) + (xy 175.55 127.85) + (xy 175.65 127.85) + (xy 175.65 127.95) + (xy 175.75 127.95) + (xy 175.75 128.05) + (xy 175.85 128.05) + (xy 175.85 128.15) + (xy 175.95 128.15) + (xy 175.95 128.25) + (xy 176.05 128.25) + (xy 176.05 128.35) + (xy 177.65 128.35) + (xy 177.65 128.45) + (xy 177.75 128.45) + (xy 177.75 128.55) + (xy 177.85 128.55) + (xy 177.85 130.65) + (xy 177.75 130.65) + (xy 177.75 130.75) + (xy 177.65 130.75) + (xy 177.65 130.85) + (xy 177.55 130.85) + (xy 177.55 130.95) + (xy 177.45 130.95) + (xy 177.45 131.05) + (xy 177.35 131.05) + (xy 177.35 131.15) + (xy 177.45 131.15) + (xy 177.45 131.25) + (xy 177.55 131.25) + (xy 177.55 131.35) + (xy 177.65 131.35) + (xy 177.65 131.55) + (xy 177.75 131.55) + (xy 177.75 131.75) + (xy 177.85 131.75) + (xy 177.85 132.45) + (xy 177.75 132.45) + (xy 177.75 132.65) + (xy 177.65 132.65) + (xy 177.65 132.85) + (xy 177.55 132.85) + (xy 177.55 132.95) + (xy 177.45 132.95) + (xy 177.45 133.05) + (xy 177.35 133.05) + (xy 177.35 133.15) + (xy 177.15 133.15) + (xy 177.15 133.25) + (xy 176.85 133.25) + (xy 176.85 133.35) + (xy 176.15 133.35) + (xy 176.15 133.25) + (xy 175.85 133.25) + (xy 175.85 133.15) + (xy 175.75 133.15) + (xy 175.75 133.25) + (xy 175.65 133.25) + (xy 175.65 133.35) + (xy 175.55 133.35) + (xy 175.55 138.85) + (xy 175.65 138.85) + (xy 175.65 138.95) + (xy 175.75 138.95) + (xy 175.75 139.05) + (xy 175.85 139.05) + (xy 175.85 139.15) + (xy 175.95 139.15) + (xy 175.95 139.25) + (xy 176.05 139.25) + (xy 176.05 139.35) + (xy 176.15 139.35) + (xy 176.15 139.45) + (xy 177.65 139.45) + (xy 177.65 139.55) + (xy 177.75 139.55) + (xy 177.75 139.65) + (xy 177.85 139.65) + (xy 177.85 141.75) + (xy 177.75 141.75) + (xy 177.75 141.85) + (xy 177.65 141.85) + (xy 177.65 141.95) + (xy 177.55 141.95) + (xy 177.55 142.05) + (xy 177.45 142.05) + (xy 177.45 142.15) + (xy 177.35 142.15) + (xy 177.35 142.25) + (xy 177.45 142.25) + (xy 177.45 142.35) + (xy 177.55 142.35) + (xy 177.55 142.45) + (xy 177.65 142.45) + (xy 177.65 142.65) + (xy 177.75 142.65) + (xy 177.75 142.85) + (xy 177.85 142.85) + (xy 177.85 143.55) + (xy 177.75 143.55) + (xy 177.75 143.75) + (xy 177.65 143.75) + (xy 177.65 143.95) + (xy 177.55 143.95) + (xy 177.55 144.05) + (xy 177.45 144.05) + (xy 177.45 144.15) + (xy 177.35 144.15) + (xy 177.35 144.25) + (xy 177.15 144.25) + (xy 177.15 144.35) + (xy 176.85 144.35) + (xy 176.85 144.45) + (xy 176.15 144.45) + (xy 176.15 144.35) + (xy 175.85 144.35) + (xy 175.85 144.25) + (xy 175.65 144.25) + (xy 175.65 144.15) + (xy 175.55 144.15) + (xy 175.55 144.05) + (xy 175.45 144.05) + (xy 175.45 143.95) + (xy 175.35 143.95) + (xy 175.35 143.75) + (xy 175.25 143.75) + (xy 175.25 143.55) + (xy 175.15 143.55) + (xy 175.15 142.85) + (xy 175.25 142.85) + (xy 175.25 142.65) + (xy 175.35 142.65) + (xy 175.35 142.55) + (xy 175.25 142.55) + (xy 175.25 142.45) + (xy 175.15 142.45) + (xy 175.15 142.35) + (xy 175.05 142.35) + (xy 175.05 142.25) + (xy 174.95 142.25) + (xy 174.95 142.15) + (xy 174.85 142.15) + (xy 174.85 142.05) + (xy 174.75 142.05) + (xy 174.75 141.95) + (xy 174.65 141.95) + (xy 174.65 141.85) + (xy 174.55 141.85) + (xy 174.55 141.75) + (xy 174.45 141.75) + (xy 174.45 141.65) + (xy 174.35 141.65) + (xy 174.35 141.55) + (xy 174.25 141.55) + (xy 174.25 141.45) + (xy 174.15 141.45) + (xy 174.15 141.35) + (xy 174.05 141.35) + (xy 174.05 141.25) + (xy 173.95 141.25) + (xy 173.95 141.15) + (xy 173.85 141.15) + (xy 173.85 141.05) + (xy 173.75 141.05) + (xy 173.75 133.45) + (xy 173.65 133.45) + (xy 173.65 133.35) + (xy 173.55 133.35) + (xy 173.55 133.25) + (xy 173.45 133.25) + (xy 173.45 133.15) + (xy 173.35 133.15) + (xy 173.35 133.05) + (xy 173.25 133.05) + (xy 173.25 132.95) + (xy 173.15 132.95) + (xy 173.15 132.85) + (xy 173.05 132.85) + (xy 173.05 132.75) + (xy 172.95 132.75) + (xy 172.95 132.65) + (xy 172.85 132.65) + (xy 172.85 132.55) + (xy 172.75 132.55) + (xy 172.75 132.45) + (xy 172.65 132.45) + (xy 172.65 132.35) + (xy 172.55 132.35) + (xy 172.55 132.25) + (xy 172.45 132.25) + (xy 172.45 132.15) + (xy 172.35 132.15) + (xy 172.35 132.05) + (xy 172.25 132.05) + (xy 172.25 131.95) + (xy 172.15 131.95) + (xy 172.15 131.85) + (xy 172.05 131.85) + (xy 172.05 131.75) + (xy 171.95 131.75) + (xy 171.95 131.65) + (xy 171.85 131.65) + (xy 171.85 131.55) + (xy 171.75 131.55) + (xy 171.75 131.45) + (xy 171.65 131.45) + (xy 171.65 131.35) + (xy 171.55 131.35) + (xy 171.55 131.25) + (xy 171.45 131.25) + (xy 171.45 131.15) + (xy 171.35 131.15) + (xy 171.35 131.05) + (xy 171.25 131.05) + (xy 171.25 130.95) + (xy 171.15 130.95) + (xy 171.15 130.85) + (xy 171.05 130.85) + (xy 171.05 130.95) + (xy 170.95 130.95) + (xy 170.95 131.05) + (xy 170.85 131.05) + (xy 170.85 131.45) + (xy 170.75 131.45) + (xy 170.75 131.55) + (xy 170.55 131.55) + (xy 170.55 131.65) + (xy 169.45 131.65) + (xy 169.45 131.55) + (xy 169.25 131.55) + (xy 169.25 131.45) + (xy 169.15 131.45) + (xy 169.15 131.35) + (xy 169.05 131.35) + (xy 169.05 131.25) + (xy 167.75 131.25) + (xy 167.75 131.35) + (xy 167.65 131.35) + (xy 167.65 131.45) + (xy 167.55 131.45) + (xy 167.55 131.55) + (xy 167.45 131.55) + (xy 167.45 131.65) + (xy 165.85 131.65) + (xy 165.85 131.55) + (xy 165.65 131.55) + (xy 165.65 131.35) + (xy 165.55 131.35) + (xy 165.55 130.75) + (xy 165.45 130.75) + (xy 165.45 130.65) + (xy 165.35 130.65) + (xy 165.35 130.55) + (xy 165.25 130.55) + (xy 165.25 130.65) + (xy 163.75 130.65) + (xy 163.75 130.75) + (xy 163.65 130.75) + (xy 163.65 130.85) + (xy 163.55 130.85) + (xy 163.55 130.95) + (xy 163.45 130.95) + (xy 163.45 131.05) + (xy 163.35 131.05) + (xy 163.35 131.15) + (xy 163.25 131.15) + (xy 163.25 131.25) + (xy 163.15 131.25) + (xy 163.15 131.35) + (xy 163.05 131.35) + (xy 163.05 131.45) + (xy 162.95 131.45) + (xy 162.95 131.55) + (xy 162.85 131.55) + (xy 162.85 131.65) + (xy 162.75 131.65) + (xy 162.75 131.75) + (xy 162.65 131.75) + (xy 162.65 131.85) + (xy 162.55 131.85) + (xy 162.55 131.95) + (xy 162.45 131.95) + (xy 162.45 132.05) + (xy 162.35 132.05) + (xy 162.35 132.15) + (xy 162.25 132.15) + (xy 162.25 132.25) + (xy 162.15 132.25) + (xy 162.15 132.35) + (xy 162.05 132.35) + (xy 162.05 132.45) + (xy 161.95 132.45) + (xy 161.95 136.05) + (xy 162.05 136.05) + (xy 162.05 136.15) + (xy 162.15 136.15) + (xy 162.15 136.85) + (xy 162.05 136.85) + (xy 162.05 136.95) + (xy 161.95 136.95) + (xy 161.95 137.05) + (xy 161.85 137.05) + (xy 161.85 137.25) + (xy 161.95 137.25) + (xy 161.95 137.35) + (xy 162.05 137.35) + (xy 162.05 137.45) + (xy 162.15 137.45) + (xy 162.15 137.55) + (xy 162.25 137.55) + (xy 162.25 137.65) + (xy 162.35 137.65) + (xy 162.35 137.75) + (xy 162.45 137.75) + (xy 162.45 137.85) + (xy 162.55 137.85) + (xy 162.55 137.95) + (xy 162.65 137.95) + (xy 162.65 138.05) + (xy 163.95 138.05) + (xy 163.95 138.15) + (xy 164.15 138.15) + (xy 164.15 138.35) + (xy 164.25 138.35) + (xy 164.25 140.05) + (xy 164.15 140.05) + (xy 164.15 140.25) + (xy 163.95 140.25) + (xy 163.95 140.35) + (xy 162.35 140.35) + (xy 162.35 140.45) + (xy 162.25 140.45) + (xy 162.25 140.55) + (xy 162.05 140.55) + (xy 162.05 140.65) + (xy 161.95 140.65) + (xy 161.95 140.75) + (xy 161.85 140.75) + (xy 161.85 140.85) + (xy 161.75 140.85) + (xy 161.75 140.95) + (xy 161.65 140.95) + (xy 161.65 142.45) + (xy 161.75 142.45) + (xy 161.75 142.55) + (xy 161.85 142.55) + (xy 161.85 142.65) + (xy 163.95 142.65) + (xy 163.95 142.75) + (xy 164.15 142.75) + (xy 164.15 142.95) + (xy 164.25 142.95) + (xy 164.25 144.15) + (xy 164.35 144.15) + (xy 164.35 144.25) + (xy 164.45 144.25) + (xy 164.45 144.35) + (xy 164.55 144.35) + (xy 164.55 144.45) + (xy 164.65 144.45) + (xy 164.65 144.55) + (xy 164.75 144.55) + (xy 164.75 144.65) + (xy 164.85 144.65) + (xy 164.85 144.75) + (xy 164.95 144.75) + (xy 164.95 144.85) + (xy 165.05 144.85) + (xy 165.05 144.95) + (xy 165.15 144.95) + (xy 165.15 145.05) + (xy 165.25 145.05) + (xy 165.25 145.15) + (xy 165.35 145.15) + (xy 165.35 145.25) + (xy 165.45 145.25) + (xy 165.45 145.35) + (xy 165.55 145.35) + (xy 165.55 145.45) + (xy 165.65 145.45) + (xy 165.65 145.55) + (xy 165.75 145.55) + (xy 165.75 145.65) + (xy 165.85 145.65) + (xy 165.85 145.75) + (xy 165.95 145.75) + (xy 165.95 145.85) + (xy 166.05 145.85) + (xy 166.05 145.95) + (xy 166.15 145.95) + (xy 166.15 146.05) + (xy 166.25 146.05) + (xy 166.25 146.15) + (xy 166.35 146.15) + (xy 166.35 146.25) + (xy 166.45 146.25) + (xy 166.45 146.35) + (xy 166.55 146.35) + (xy 166.55 146.45) + (xy 166.65 146.45) + (xy 166.65 146.55) + (xy 166.75 146.55) + (xy 166.75 146.65) + (xy 166.85 146.65) + (xy 166.85 146.75) + (xy 166.95 146.75) + (xy 166.95 146.85) + (xy 167.05 146.85) + (xy 167.05 146.95) + (xy 167.15 146.95) + (xy 167.15 147.05) + (xy 167.25 147.05) + (xy 167.25 147.15) + (xy 167.35 147.15) + (xy 167.35 147.25) + (xy 167.45 147.25) + (xy 167.45 147.35) + (xy 167.55 147.35) + (xy 167.55 147.45) + (xy 167.65 147.45) + (xy 167.65 147.55) + (xy 167.75 147.55) + (xy 167.75 147.65) + (xy 167.85 147.65) + (xy 167.85 147.75) + (xy 167.95 147.75) + (xy 167.95 147.85) + (xy 168.05 147.85) + (xy 168.05 147.95) + (xy 168.15 147.95) + (xy 168.15 148.05) + (xy 168.25 148.05) + (xy 168.25 148.15) + (xy 168.35 148.15) + (xy 168.35 148.25) + (xy 168.45 148.25) + (xy 168.45 148.35) + (xy 168.55 148.35) + (xy 168.55 148.45) + (xy 168.65 148.45) + (xy 168.65 148.55) + (xy 168.75 148.55) + (xy 168.75 148.65) + (xy 168.85 148.65) + (xy 168.85 148.75) + (xy 168.95 148.75) + (xy 168.95 148.85) + (xy 169.05 148.85) + (xy 169.05 148.95) + (xy 169.15 148.95) + (xy 169.15 149.05) + (xy 169.25 149.05) + (xy 169.25 149.15) + (xy 169.35 149.15) + (xy 169.35 149.25) + (xy 169.45 149.25) + (xy 169.45 149.35) + (xy 169.55 149.35) + (xy 169.55 149.45) + (xy 169.65 149.45) + (xy 169.65 149.55) + (xy 169.75 149.55) + (xy 169.75 149.65) + (xy 169.85 149.65) + (xy 169.85 149.75) + (xy 169.95 149.75) + (xy 169.95 149.85) + (xy 170.05 149.85) + (xy 170.05 149.95) + (xy 170.15 149.95) + (xy 170.15 150.05) + (xy 170.25 150.05) + (xy 170.25 150.15) + (xy 170.35 150.15) + (xy 170.35 150.25) + (xy 170.45 150.25) + (xy 170.45 150.35) + (xy 170.55 150.35) + (xy 170.55 150.45) + (xy 170.65 150.45) + (xy 170.65 150.55) + (xy 170.75 150.55) + (xy 170.75 150.65) + (xy 176.95 150.65) + (xy 176.95 150.75) + (xy 178.45 150.75) + (xy 178.45 150.85) + (xy 178.65 150.85) + (xy 178.65 151.05) + (xy 178.75 151.05) + (xy 178.75 152.95) + (xy 178.65 152.95) + (xy 178.65 153.15) + (xy 178.45 153.15) + (xy 178.45 153.25) + (xy 178.35 153.25) + (xy 178.35 153.35) + (xy 178.25 153.35) + (xy 178.25 153.45) + (xy 178.15 153.45) + (xy 178.15 153.55) + (xy 178.25 153.55) + (xy 178.25 153.65) + (xy 178.35 153.65) + (xy 178.35 153.75) + (xy 178.45 153.75) + (xy 178.45 153.85) + (xy 178.55 153.85) + (xy 178.55 153.95) + (xy 178.65 153.95) + (xy 178.65 154.25) + (xy 178.75 154.25) + (xy 178.75 154.85) + (xy 178.65 154.85) + (xy 178.65 155.05) + (xy 178.55 155.05) + (xy 178.55 155.25) + (xy 178.45 155.25) + (xy 178.45 155.35) + (xy 178.35 155.35) + (xy 178.35 155.45) + (xy 178.25 155.45) + (xy 178.25 155.55) + (xy 178.15 155.55) + (xy 178.15 155.65) + (xy 178.05 155.65) + (xy 178.05 155.75) + (xy 177.95 155.75) + (xy 177.95 155.85) + (xy 178.05 155.85) + (xy 178.05 155.95) + (xy 178.15 155.95) + (xy 178.15 156.05) + (xy 178.25 156.05) + (xy 178.25 156.15) + (xy 178.35 156.15) + (xy 178.35 156.25) + (xy 178.45 156.25) + (xy 178.45 156.35) + (xy 178.55 156.35) + (xy 178.55 156.55) + (xy 178.65 156.55) + (xy 178.65 156.85) + (xy 178.75 156.85) + (xy 178.75 157.35) + (xy 178.65 157.35) + (xy 178.65 157.65) + (xy 178.55 157.65) + (xy 178.55 157.75) + (xy 178.45 157.75) + (xy 178.45 157.95) + (xy 178.35 157.95) + (xy 178.35 158.05) + (xy 178.15 158.05) + (xy 178.15 158.15) + (xy 178.05 158.15) + (xy 178.05 158.25) + (xy 177.65 158.25) + (xy 177.65 158.35) + (xy 177.35 158.35) + (xy 177.35 158.25) + (xy 176.95 158.25) + (xy 176.95 158.15) + (xy 176.85 158.15) + (xy 176.85 158.05) + (xy 176.65 158.05) + (xy 176.65 157.95) + (xy 176.55 157.95) + (xy 176.55 157.75) + (xy 176.45 157.75) + (xy 176.45 157.65) + (xy 176.35 157.65) + (xy 176.35 157.35) + (xy 176.25 157.35) + (xy 176.25 157.25) + (xy 176.15 157.25) + (xy 176.15 157.15) + (xy 176.05 157.15) + (xy 176.05 157.05) + (xy 167.65 157.05) + (xy 167.65 157.15) + (xy 167.55 157.15) + (xy 167.55 157.25) + (xy 167.45 157.25) + (xy 167.45 162.55) + (xy 167.55 162.55) + (xy 167.55 162.65) + (xy 167.65 162.65) + (xy 167.65 162.75) + (xy 179.25 162.75) + (xy 179.25 162.65) + (xy 179.35 162.65) + (xy 179.35 162.55) + (xy 179.45 162.55) + (xy 179.45 100.75) + (xy 179.35 100.75) + (xy 179.35 100.65) + (xy 179.25 100.65) + (xy 179.25 100.55) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 137.15 101.15) + (xy 137.15 101.25) + (xy 137.05 101.25) + (xy 137.05 101.35) + (xy 136.95 101.35) + (xy 136.95 101.45) + (xy 136.85 101.45) + (xy 136.85 101.55) + (xy 136.75 101.55) + (xy 136.75 102.25) + (xy 136.65 102.25) + (xy 136.65 102.45) + (xy 136.55 102.45) + (xy 136.55 102.65) + (xy 136.65 102.65) + (xy 136.65 102.75) + (xy 136.75 102.75) + (xy 136.75 106.65) + (xy 136.85 106.65) + (xy 136.85 106.75) + (xy 136.95 106.75) + (xy 136.95 106.85) + (xy 137.25 106.85) + (xy 137.25 106.95) + (xy 137.45 106.95) + (xy 137.45 107.15) + (xy 137.55 107.15) + (xy 137.55 108.85) + (xy 137.45 108.85) + (xy 137.45 109.05) + (xy 137.25 109.05) + (xy 137.25 109.15) + (xy 136.05 109.15) + (xy 136.05 109.05) + (xy 135.95 109.05) + (xy 135.95 109.15) + (xy 135.65 109.15) + (xy 135.65 109.25) + (xy 135.55 109.25) + (xy 135.55 109.35) + (xy 135.45 109.35) + (xy 135.45 111.65) + (xy 135.55 111.65) + (xy 135.55 111.75) + (xy 135.65 111.75) + (xy 135.65 111.85) + (xy 138.35 111.85) + (xy 138.35 111.75) + (xy 138.75 111.75) + (xy 138.75 111.65) + (xy 138.85 111.65) + (xy 138.85 111.55) + (xy 138.95 111.55) + (xy 138.95 107.05) + (xy 139.05 107.05) + (xy 139.05 106.95) + (xy 139.15 106.95) + (xy 139.15 106.75) + (xy 139.25 106.75) + (xy 139.25 106.65) + (xy 139.35 106.65) + (xy 139.35 106.55) + (xy 139.45 106.55) + (xy 139.45 106.45) + (xy 139.55 106.45) + (xy 139.55 106.35) + (xy 139.65 106.35) + (xy 139.65 106.25) + (xy 139.75 106.25) + (xy 139.75 106.15) + (xy 139.85 106.15) + (xy 139.85 106.05) + (xy 139.95 106.05) + (xy 139.95 105.95) + (xy 140.05 105.95) + (xy 140.05 105.85) + (xy 140.15 105.85) + (xy 140.15 105.75) + (xy 140.25 105.75) + (xy 140.25 105.65) + (xy 140.35 105.65) + (xy 140.35 104.35) + (xy 140.45 104.35) + (xy 140.45 104.25) + (xy 140.55 104.25) + (xy 140.55 102.75) + (xy 140.45 102.75) + (xy 140.45 102.65) + (xy 140.35 102.65) + (xy 140.35 102.45) + (xy 140.25 102.45) + (xy 140.25 102.25) + (xy 140.15 102.25) + (xy 140.15 101.55) + (xy 140.25 101.55) + (xy 140.25 101.35) + (xy 140.15 101.35) + (xy 140.15 101.25) + (xy 140.05 101.25) + (xy 140.05 101.15) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 142.65 114.95) + (xy 142.55 114.95) + (xy 142.55 115.05) + (xy 142.45 115.05) + (xy 142.45 115.15) + (xy 142.35 115.15) + (xy 142.35 115.35) + (xy 142.45 115.35) + (xy 142.45 115.45) + (xy 142.55 115.45) + (xy 142.55 115.55) + (xy 142.65 115.55) + (xy 142.65 115.65) + (xy 142.75 115.65) + (xy 142.75 115.75) + (xy 142.85 115.75) + (xy 142.85 115.85) + (xy 142.95 115.85) + (xy 142.95 115.95) + (xy 143.05 115.95) + (xy 143.05 116.05) + (xy 143.15 116.05) + (xy 143.15 116.15) + (xy 143.25 116.15) + (xy 143.25 116.25) + (xy 143.35 116.25) + (xy 143.35 116.35) + (xy 143.45 116.35) + (xy 143.45 116.45) + (xy 143.55 116.45) + (xy 143.55 116.55) + (xy 143.65 116.55) + (xy 143.65 116.65) + (xy 143.75 116.65) + (xy 143.75 116.75) + (xy 143.85 116.75) + (xy 143.85 116.85) + (xy 143.95 116.85) + (xy 143.95 116.95) + (xy 144.05 116.95) + (xy 144.05 117.05) + (xy 144.15 117.05) + (xy 144.15 117.15) + (xy 144.25 117.15) + (xy 144.25 117.25) + (xy 144.35 117.25) + (xy 144.35 117.35) + (xy 144.45 117.35) + (xy 144.45 117.45) + (xy 144.55 117.45) + (xy 144.55 117.55) + (xy 144.65 117.55) + (xy 144.65 117.65) + (xy 144.75 117.65) + (xy 144.75 117.75) + (xy 144.85 117.75) + (xy 144.85 117.85) + (xy 144.95 117.85) + (xy 144.95 117.95) + (xy 145.05 117.95) + (xy 145.05 118.05) + (xy 145.15 118.05) + (xy 145.15 118.15) + (xy 145.25 118.15) + (xy 145.25 118.25) + (xy 145.35 118.25) + (xy 145.35 118.35) + (xy 145.45 118.35) + (xy 145.45 118.45) + (xy 145.55 118.45) + (xy 145.55 118.55) + (xy 145.65 118.55) + (xy 145.65 118.65) + (xy 145.75 118.65) + (xy 145.75 118.75) + (xy 145.85 118.75) + (xy 145.85 118.85) + (xy 145.95 118.85) + (xy 145.95 118.95) + (xy 146.05 118.95) + (xy 146.05 119.05) + (xy 146.15 119.05) + (xy 146.15 126.45) + (xy 146.25 126.45) + (xy 146.25 126.55) + (xy 146.35 126.55) + (xy 146.35 126.65) + (xy 146.45 126.65) + (xy 146.45 126.55) + (xy 146.55 126.55) + (xy 146.55 126.45) + (xy 146.65 126.45) + (xy 146.65 126.35) + (xy 146.75 126.35) + (xy 146.75 126.25) + (xy 146.85 126.25) + (xy 146.85 126.15) + (xy 146.95 126.15) + (xy 146.95 126.05) + (xy 147.05 126.05) + (xy 147.05 125.95) + (xy 147.15 125.95) + (xy 147.15 125.85) + (xy 147.25 125.85) + (xy 147.25 125.75) + (xy 147.35 125.75) + (xy 147.35 125.65) + (xy 147.45 125.65) + (xy 147.45 125.55) + (xy 147.55 125.55) + (xy 147.55 125.45) + (xy 147.65 125.45) + (xy 147.65 125.35) + (xy 147.75 125.35) + (xy 147.75 125.25) + (xy 147.85 125.25) + (xy 147.85 125.15) + (xy 147.95 125.15) + (xy 147.95 125.05) + (xy 148.05 125.05) + (xy 148.05 124.95) + (xy 148.15 124.95) + (xy 148.15 124.85) + (xy 148.25 124.85) + (xy 148.25 124.75) + (xy 148.35 124.75) + (xy 148.35 124.65) + (xy 148.45 124.65) + (xy 148.45 124.55) + (xy 148.55 124.55) + (xy 148.55 124.45) + (xy 148.65 124.45) + (xy 148.65 124.35) + (xy 148.75 124.35) + (xy 148.75 124.25) + (xy 148.85 124.25) + (xy 148.85 124.15) + (xy 148.95 124.15) + (xy 148.95 124.05) + (xy 149.05 124.05) + (xy 149.05 123.95) + (xy 149.15 123.95) + (xy 149.15 123.85) + (xy 149.25 123.85) + (xy 149.25 123.75) + (xy 149.35 123.75) + (xy 149.35 123.65) + (xy 149.45 123.65) + (xy 149.45 123.55) + (xy 149.55 123.55) + (xy 149.55 123.45) + (xy 149.65 123.45) + (xy 149.65 123.35) + (xy 149.75 123.35) + (xy 149.75 123.25) + (xy 149.85 123.25) + (xy 149.85 123.15) + (xy 149.95 123.15) + (xy 149.95 123.05) + (xy 150.05 123.05) + (xy 150.05 122.95) + (xy 150.15 122.95) + (xy 150.15 122.85) + (xy 150.25 122.85) + (xy 150.25 122.75) + (xy 150.35 122.75) + (xy 150.35 122.65) + (xy 150.45 122.65) + (xy 150.45 122.55) + (xy 150.55 122.55) + (xy 150.55 122.45) + (xy 150.65 122.45) + (xy 150.65 122.35) + (xy 150.75 122.35) + (xy 150.75 122.25) + (xy 150.85 122.25) + (xy 150.85 122.15) + (xy 150.95 122.15) + (xy 150.95 122.05) + (xy 151.05 122.05) + (xy 151.05 121.95) + (xy 151.15 121.95) + (xy 151.15 121.85) + (xy 151.25 121.85) + (xy 151.25 121.75) + (xy 151.35 121.75) + (xy 151.35 121.65) + (xy 151.45 121.65) + (xy 151.45 121.55) + (xy 151.55 121.55) + (xy 151.55 121.45) + (xy 151.65 121.45) + (xy 151.65 121.35) + (xy 151.75 121.35) + (xy 151.75 121.25) + (xy 151.85 121.25) + (xy 151.85 121.15) + (xy 151.95 121.15) + (xy 151.95 121.05) + (xy 152.05 121.05) + (xy 152.05 120.95) + (xy 152.15 120.95) + (xy 152.15 120.85) + (xy 152.25 120.85) + (xy 152.25 120.75) + (xy 152.35 120.75) + (xy 152.35 120.15) + (xy 152.45 120.15) + (xy 152.45 119.95) + (xy 152.55 119.95) + (xy 152.55 119.85) + (xy 152.65 119.85) + (xy 152.65 119.35) + (xy 152.55 119.35) + (xy 152.55 119.25) + (xy 152.45 119.25) + (xy 152.45 119.05) + (xy 152.35 119.05) + (xy 152.35 117.95) + (xy 152.45 117.95) + (xy 152.45 117.75) + (xy 152.55 117.75) + (xy 152.55 117.65) + (xy 152.75 117.65) + (xy 152.75 117.55) + (xy 152.85 117.55) + (xy 152.85 117.45) + (xy 152.95 117.45) + (xy 152.95 115.35) + (xy 152.85 115.35) + (xy 152.85 115.25) + (xy 152.75 115.25) + (xy 152.75 115.15) + (xy 152.55 115.15) + (xy 152.55 115.25) + (xy 152.45 115.25) + (xy 152.45 115.35) + (xy 152.35 115.35) + (xy 152.35 115.45) + (xy 152.25 115.45) + (xy 152.25 115.55) + (xy 152.15 115.55) + (xy 152.15 115.65) + (xy 151.95 115.65) + (xy 151.95 115.75) + (xy 151.05 115.75) + (xy 151.05 115.65) + (xy 150.85 115.65) + (xy 150.85 115.55) + (xy 150.75 115.55) + (xy 150.75 115.45) + (xy 150.65 115.45) + (xy 150.65 115.35) + (xy 150.55 115.35) + (xy 150.55 115.25) + (xy 150.45 115.25) + (xy 150.45 115.15) + (xy 150.05 115.15) + (xy 150.05 115.25) + (xy 149.95 115.25) + (xy 149.95 115.35) + (xy 149.85 115.35) + (xy 149.85 115.45) + (xy 149.75 115.45) + (xy 149.75 115.55) + (xy 149.55 115.55) + (xy 149.55 115.65) + (xy 149.35 115.65) + (xy 149.35 115.75) + (xy 148.55 115.75) + (xy 148.55 115.65) + (xy 148.35 115.65) + (xy 148.35 115.55) + (xy 148.15 115.55) + (xy 148.15 115.45) + (xy 148.05 115.45) + (xy 148.05 115.35) + (xy 147.95 115.35) + (xy 147.95 115.25) + (xy 147.85 115.25) + (xy 147.85 115.15) + (xy 147.45 115.15) + (xy 147.45 115.25) + (xy 147.35 115.25) + (xy 147.35 115.35) + (xy 147.25 115.35) + (xy 147.25 115.45) + (xy 147.15 115.45) + (xy 147.15 115.55) + (xy 147.05 115.55) + (xy 147.05 115.65) + (xy 146.85 115.65) + (xy 146.85 115.75) + (xy 145.95 115.75) + (xy 145.95 115.65) + (xy 145.75 115.65) + (xy 145.75 115.55) + (xy 145.65 115.55) + (xy 145.65 115.45) + (xy 145.55 115.45) + (xy 145.55 115.35) + (xy 145.45 115.35) + (xy 145.45 115.25) + (xy 145.35 115.25) + (xy 145.35 115.15) + (xy 144.95 115.15) + (xy 144.95 115.25) + (xy 144.85 115.25) + (xy 144.85 115.35) + (xy 144.75 115.35) + (xy 144.75 115.45) + (xy 144.65 115.45) + (xy 144.65 115.55) + (xy 144.45 115.55) + (xy 144.45 115.65) + (xy 144.25 115.65) + (xy 144.25 115.75) + (xy 143.45 115.75) + (xy 143.45 115.65) + (xy 143.25 115.65) + (xy 143.25 115.55) + (xy 143.05 115.55) + (xy 143.05 115.45) + (xy 142.95 115.45) + (xy 142.95 115.25) + (xy 142.85 115.25) + (xy 142.85 115.15) + (xy 142.75 115.15) + (xy 142.75 115.05) + (xy 142.65 115.05) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 140.65 115.65) + (xy 140.65 115.75) + (xy 140.55 115.75) + (xy 140.55 115.85) + (xy 140.45 115.85) + (xy 140.45 118.65) + (xy 140.55 118.65) + (xy 140.55 118.75) + (xy 140.65 118.75) + (xy 140.65 118.85) + (xy 140.75 118.85) + (xy 140.75 118.95) + (xy 140.85 118.95) + (xy 140.85 119.05) + (xy 140.95 119.05) + (xy 140.95 119.15) + (xy 141.05 119.15) + (xy 141.05 119.25) + (xy 141.15 119.25) + (xy 141.15 119.35) + (xy 144.15 119.35) + (xy 144.15 119.45) + (xy 144.25 119.45) + (xy 144.25 119.55) + (xy 144.35 119.55) + (xy 144.35 122.45) + (xy 144.25 122.45) + (xy 144.25 122.55) + (xy 144.15 122.55) + (xy 144.15 122.65) + (xy 140.35 122.65) + (xy 140.35 122.55) + (xy 140.25 122.55) + (xy 140.25 122.45) + (xy 140.15 122.45) + (xy 140.15 120.55) + (xy 140.05 120.55) + (xy 140.05 120.45) + (xy 139.95 120.45) + (xy 139.95 120.35) + (xy 139.85 120.35) + (xy 139.85 120.25) + (xy 139.75 120.25) + (xy 139.75 120.15) + (xy 139.65 120.15) + (xy 139.65 120.05) + (xy 139.55 120.05) + (xy 139.55 119.95) + (xy 139.45 119.95) + (xy 139.45 119.85) + (xy 139.35 119.85) + (xy 139.35 119.75) + (xy 123.65 119.75) + (xy 123.65 119.85) + (xy 123.55 119.85) + (xy 123.55 119.95) + (xy 123.45 119.95) + (xy 123.45 120.05) + (xy 123.35 120.05) + (xy 123.35 120.15) + (xy 123.25 120.15) + (xy 123.25 120.25) + (xy 123.15 120.25) + (xy 123.15 120.35) + (xy 123.05 120.35) + (xy 123.05 120.45) + (xy 122.95 120.45) + (xy 122.95 120.55) + (xy 122.85 120.55) + (xy 122.85 122.45) + (xy 122.75 122.45) + (xy 122.75 122.55) + (xy 122.65 122.55) + (xy 122.65 122.65) + (xy 119.55 122.65) + (xy 119.55 122.75) + (xy 119.45 122.75) + (xy 119.45 122.85) + (xy 119.35 122.85) + (xy 119.35 122.95) + (xy 118.15 122.95) + (xy 118.15 123.05) + (xy 118.05 123.05) + (xy 118.05 123.15) + (xy 117.95 123.15) + (xy 117.95 123.25) + (xy 117.85 123.25) + (xy 117.85 123.35) + (xy 117.75 123.35) + (xy 117.75 123.45) + (xy 117.65 123.45) + (xy 117.65 123.55) + (xy 117.55 123.55) + (xy 117.55 123.65) + (xy 117.45 123.65) + (xy 117.45 123.75) + (xy 117.35 123.75) + (xy 117.35 123.85) + (xy 117.25 123.85) + (xy 117.25 124.55) + (xy 117.35 124.55) + (xy 117.35 124.65) + (xy 117.45 124.65) + (xy 117.45 124.75) + (xy 117.55 124.75) + (xy 117.55 124.85) + (xy 117.65 124.85) + (xy 117.65 133.15) + (xy 117.75 133.15) + (xy 117.75 133.25) + (xy 117.85 133.25) + (xy 117.85 133.35) + (xy 117.95 133.35) + (xy 117.95 133.45) + (xy 118.85 133.45) + (xy 118.85 133.55) + (xy 119.05 133.55) + (xy 119.05 133.75) + (xy 119.15 133.75) + (xy 119.15 135.55) + (xy 119.25 135.55) + (xy 119.25 135.65) + (xy 119.35 135.65) + (xy 119.35 135.75) + (xy 119.45 135.75) + (xy 119.45 138.15) + (xy 119.55 138.15) + (xy 119.55 138.25) + (xy 119.65 138.25) + (xy 119.65 138.35) + (xy 119.85 138.35) + (xy 119.85 138.45) + (xy 119.95 138.45) + (xy 119.95 140.75) + (xy 119.85 140.75) + (xy 119.85 140.85) + (xy 118.25 140.85) + (xy 118.25 140.75) + (xy 118.15 140.75) + (xy 118.15 140.65) + (xy 118.05 140.65) + (xy 118.05 139.05) + (xy 117.95 139.05) + (xy 117.95 138.45) + (xy 117.85 138.45) + (xy 117.85 138.35) + (xy 117.75 138.35) + (xy 117.75 138.25) + (xy 113.65 138.25) + (xy 113.65 138.35) + (xy 113.55 138.35) + (xy 113.55 138.45) + (xy 113.45 138.45) + (xy 113.45 138.55) + (xy 113.35 138.55) + (xy 113.35 138.65) + (xy 113.25 138.65) + (xy 113.25 138.75) + (xy 113.15 138.75) + (xy 113.15 138.85) + (xy 113.05 138.85) + (xy 113.05 138.95) + (xy 112.95 138.95) + (xy 112.95 139.05) + (xy 112.85 139.05) + (xy 112.85 139.15) + (xy 112.75 139.15) + (xy 112.75 139.25) + (xy 112.65 139.25) + (xy 112.65 139.35) + (xy 112.55 139.35) + (xy 112.55 139.45) + (xy 112.45 139.45) + (xy 112.45 139.55) + (xy 112.35 139.55) + (xy 112.35 139.65) + (xy 112.25 139.65) + (xy 112.25 139.75) + (xy 112.15 139.75) + (xy 112.15 140.15) + (xy 112.25 140.15) + (xy 112.25 140.25) + (xy 112.35 140.25) + (xy 112.35 140.35) + (xy 113.25 140.35) + (xy 113.25 140.25) + (xy 113.35 140.25) + (xy 113.35 140.15) + (xy 113.45 140.15) + (xy 113.45 140.05) + (xy 113.55 140.05) + (xy 113.55 139.95) + (xy 113.65 139.95) + (xy 113.65 139.85) + (xy 113.75 139.85) + (xy 113.75 139.75) + (xy 113.85 139.75) + (xy 113.85 138.95) + (xy 113.95 138.95) + (xy 113.95 138.85) + (xy 115.35 138.85) + (xy 115.35 138.95) + (xy 115.45 138.95) + (xy 115.45 140.65) + (xy 115.35 140.65) + (xy 115.35 140.75) + (xy 114.45 140.75) + (xy 114.45 140.85) + (xy 114.35 140.85) + (xy 114.35 140.95) + (xy 114.25 140.95) + (xy 114.25 141.05) + (xy 114.15 141.05) + (xy 114.15 141.15) + (xy 114.05 141.15) + (xy 114.05 141.25) + (xy 113.95 141.25) + (xy 113.95 141.35) + (xy 113.75 141.35) + (xy 113.75 141.45) + (xy 111.15 141.45) + (xy 111.15 141.55) + (xy 111.05 141.55) + (xy 111.05 141.65) + (xy 110.95 141.65) + (xy 110.95 141.75) + (xy 111.05 141.75) + (xy 111.05 141.85) + (xy 111.15 141.85) + (xy 111.15 141.95) + (xy 111.35 141.95) + (xy 111.35 142.05) + (xy 111.45 142.05) + (xy 111.45 143.45) + (xy 111.35 143.45) + (xy 111.35 143.55) + (xy 111.15 143.55) + (xy 111.15 143.65) + (xy 111.05 143.65) + (xy 111.05 143.75) + (xy 110.95 143.75) + (xy 110.95 143.95) + (xy 111.05 143.95) + (xy 111.05 144.05) + (xy 111.15 144.05) + (xy 111.15 144.15) + (xy 111.25 144.15) + (xy 111.25 144.25) + (xy 111.35 144.25) + (xy 111.35 144.35) + (xy 111.45 144.35) + (xy 111.45 144.45) + (xy 111.55 144.45) + (xy 111.55 144.55) + (xy 111.65 144.55) + (xy 111.65 144.65) + (xy 111.75 144.65) + (xy 111.75 144.75) + (xy 111.85 144.75) + (xy 111.85 144.85) + (xy 111.95 144.85) + (xy 111.95 147.65) + (xy 112.05 147.65) + (xy 112.05 147.75) + (xy 112.15 147.75) + (xy 112.15 147.85) + (xy 112.65 147.85) + (xy 112.65 147.95) + (xy 112.85 147.95) + (xy 112.85 148.05) + (xy 113.15 148.05) + (xy 113.15 147.95) + (xy 113.35 147.95) + (xy 113.35 147.85) + (xy 114.65 147.85) + (xy 114.65 147.75) + (xy 114.75 147.75) + (xy 114.75 147.65) + (xy 114.85 147.65) + (xy 114.85 147.55) + (xy 114.95 147.55) + (xy 114.95 147.45) + (xy 117.95 147.45) + (xy 117.95 147.35) + (xy 118.05 147.35) + (xy 118.05 147.25) + (xy 118.15 147.25) + (xy 118.15 147.15) + (xy 118.25 147.15) + (xy 118.25 147.05) + (xy 118.35 147.05) + (xy 118.35 146.95) + (xy 118.25 146.95) + (xy 118.25 146.85) + (xy 118.15 146.85) + (xy 118.15 146.15) + (xy 118.05 146.15) + (xy 118.05 146.05) + (xy 117.95 146.05) + (xy 117.95 145.95) + (xy 117.65 145.95) + (xy 117.65 145.85) + (xy 117.55 145.85) + (xy 117.55 145.75) + (xy 117.45 145.75) + (xy 117.45 145.65) + (xy 117.35 145.65) + (xy 117.35 144.95) + (xy 117.45 144.95) + (xy 117.45 144.85) + (xy 117.55 144.85) + (xy 117.55 144.75) + (xy 117.65 144.75) + (xy 117.65 144.65) + (xy 118.05 144.65) + (xy 118.05 144.55) + (xy 118.15 144.55) + (xy 118.15 144.45) + (xy 118.25 144.45) + (xy 118.25 144.25) + (xy 118.15 144.25) + (xy 118.15 143.35) + (xy 118.25 143.35) + (xy 118.25 143.25) + (xy 118.35 143.25) + (xy 118.35 143.15) + (xy 120.65 143.15) + (xy 120.65 143.25) + (xy 120.85 143.25) + (xy 120.85 143.35) + (xy 120.95 143.35) + (xy 120.95 143.45) + (xy 121.35 143.45) + (xy 121.35 143.55) + (xy 121.45 143.55) + (xy 121.45 143.65) + (xy 121.55 143.65) + (xy 121.55 143.75) + (xy 121.75 143.75) + (xy 121.75 143.65) + (xy 121.85 143.65) + (xy 121.85 143.55) + (xy 121.95 143.55) + (xy 121.95 143.45) + (xy 122.05 143.45) + (xy 122.05 143.35) + (xy 122.15 143.35) + (xy 122.15 143.25) + (xy 122.25 143.25) + (xy 122.25 143.15) + (xy 122.35 143.15) + (xy 122.35 143.05) + (xy 122.45 143.05) + (xy 122.45 142.95) + (xy 122.55 142.95) + (xy 122.55 142.85) + (xy 122.65 142.85) + (xy 122.65 142.75) + (xy 122.75 142.75) + (xy 122.75 142.65) + (xy 122.85 142.65) + (xy 122.85 142.55) + (xy 122.95 142.55) + (xy 122.95 142.45) + (xy 123.05 142.45) + (xy 123.05 142.35) + (xy 123.15 142.35) + (xy 123.15 142.05) + (xy 123.25 142.05) + (xy 123.25 141.95) + (xy 123.35 141.95) + (xy 123.35 141.85) + (xy 125.55 141.85) + (xy 125.55 141.95) + (xy 125.75 141.95) + (xy 125.75 142.15) + (xy 125.85 142.15) + (xy 125.85 142.35) + (xy 125.95 142.35) + (xy 125.95 142.45) + (xy 126.05 142.45) + (xy 126.05 142.55) + (xy 126.15 142.55) + (xy 126.15 142.65) + (xy 126.25 142.65) + (xy 126.25 142.75) + (xy 126.35 142.75) + (xy 126.35 142.85) + (xy 126.85 142.85) + (xy 126.85 142.95) + (xy 127.15 142.95) + (xy 127.15 142.85) + (xy 127.25 142.85) + (xy 127.25 142.75) + (xy 127.35 142.75) + (xy 127.35 142.65) + (xy 127.45 142.65) + (xy 127.45 142.55) + (xy 127.55 142.55) + (xy 127.55 142.45) + (xy 127.65 142.45) + (xy 127.65 142.35) + (xy 127.75 142.35) + (xy 127.75 142.25) + (xy 127.85 142.25) + (xy 127.85 142.15) + (xy 127.95 142.15) + (xy 127.95 142.05) + (xy 128.05 142.05) + (xy 128.05 141.95) + (xy 128.15 141.95) + (xy 128.15 141.85) + (xy 128.25 141.85) + (xy 128.25 141.75) + (xy 128.35 141.75) + (xy 128.35 141.65) + (xy 128.45 141.65) + (xy 128.45 141.55) + (xy 128.55 141.55) + (xy 128.55 141.45) + (xy 128.65 141.45) + (xy 128.65 141.35) + (xy 128.75 141.35) + (xy 128.75 141.25) + (xy 128.85 141.25) + (xy 128.85 141.15) + (xy 128.95 141.15) + (xy 128.95 141.05) + (xy 129.05 141.05) + (xy 129.05 140.95) + (xy 129.15 140.95) + (xy 129.15 140.85) + (xy 129.25 140.85) + (xy 129.25 137.65) + (xy 129.35 137.65) + (xy 129.35 136.95) + (xy 129.45 136.95) + (xy 129.45 136.85) + (xy 129.35 136.85) + (xy 129.35 136.75) + (xy 129.25 136.75) + (xy 129.25 136.65) + (xy 127.85 136.65) + (xy 127.85 136.55) + (xy 127.65 136.55) + (xy 127.65 136.45) + (xy 126.25 136.45) + (xy 126.25 136.55) + (xy 126.15 136.55) + (xy 126.15 136.65) + (xy 126.05 136.65) + (xy 126.05 136.75) + (xy 125.95 136.75) + (xy 125.95 136.85) + (xy 125.85 136.85) + (xy 125.85 136.95) + (xy 125.75 136.95) + (xy 125.75 137.05) + (xy 125.65 137.05) + (xy 125.65 137.15) + (xy 125.55 137.15) + (xy 125.55 137.25) + (xy 125.45 137.25) + (xy 125.45 137.35) + (xy 125.35 137.35) + (xy 125.35 137.45) + (xy 125.25 137.45) + (xy 125.25 137.55) + (xy 125.15 137.55) + (xy 125.15 137.65) + (xy 125.05 137.65) + (xy 125.05 137.75) + (xy 124.95 137.75) + (xy 124.95 137.85) + (xy 124.85 137.85) + (xy 124.85 137.95) + (xy 124.75 137.95) + (xy 124.75 138.05) + (xy 124.65 138.05) + (xy 124.65 138.15) + (xy 124.75 138.15) + (xy 124.75 138.25) + (xy 124.85 138.25) + (xy 124.85 138.35) + (xy 125.35 138.35) + (xy 125.35 138.45) + (xy 125.45 138.45) + (xy 125.45 140.75) + (xy 125.35 140.75) + (xy 125.35 140.85) + (xy 123.75 140.85) + (xy 123.75 140.75) + (xy 123.65 140.75) + (xy 123.65 140.65) + (xy 123.55 140.65) + (xy 123.55 139.15) + (xy 123.45 139.15) + (xy 123.45 139.05) + (xy 123.35 139.05) + (xy 123.35 138.95) + (xy 123.25 138.95) + (xy 123.25 138.85) + (xy 123.15 138.85) + (xy 123.15 138.75) + (xy 123.05 138.75) + (xy 123.05 138.65) + (xy 122.95 138.65) + (xy 122.95 138.55) + (xy 122.85 138.55) + (xy 122.85 138.45) + (xy 122.75 138.45) + (xy 122.75 138.35) + (xy 122.65 138.35) + (xy 122.65 136.55) + (xy 122.55 136.55) + (xy 122.55 136.45) + (xy 122.45 136.45) + (xy 122.45 136.35) + (xy 122.35 136.35) + (xy 122.35 136.25) + (xy 122.25 136.25) + (xy 122.25 136.15) + (xy 122.15 136.15) + (xy 122.15 135.95) + (xy 122.05 135.95) + (xy 122.05 135.75) + (xy 121.95 135.75) + (xy 121.95 134.25) + (xy 122.05 134.25) + (xy 122.05 134.05) + (xy 122.15 134.05) + (xy 122.15 133.85) + (xy 122.25 133.85) + (xy 122.25 133.75) + (xy 122.35 133.75) + (xy 122.35 133.65) + (xy 122.55 133.65) + (xy 122.55 133.55) + (xy 122.85 133.55) + (xy 122.85 133.45) + (xy 123.35 133.45) + (xy 123.35 133.55) + (xy 123.75 133.55) + (xy 123.75 133.45) + (xy 123.85 133.45) + (xy 123.85 133.35) + (xy 123.95 133.35) + (xy 123.95 133.25) + (xy 124.05 133.25) + (xy 124.05 133.15) + (xy 124.15 133.15) + (xy 124.15 133.05) + (xy 124.25 133.05) + (xy 124.25 132.95) + (xy 124.35 132.95) + (xy 124.35 132.85) + (xy 124.45 132.85) + (xy 124.45 132.75) + (xy 124.55 132.75) + (xy 124.55 132.65) + (xy 124.65 132.65) + (xy 124.65 132.55) + (xy 124.75 132.55) + (xy 124.75 132.45) + (xy 124.85 132.45) + (xy 124.85 132.35) + (xy 124.95 132.35) + (xy 124.95 132.25) + (xy 125.05 132.25) + (xy 125.05 132.15) + (xy 125.15 132.15) + (xy 125.15 132.05) + (xy 125.25 132.05) + (xy 125.25 131.95) + (xy 125.35 131.95) + (xy 125.35 131.85) + (xy 125.45 131.85) + (xy 125.45 131.75) + (xy 125.55 131.75) + (xy 125.55 131.65) + (xy 125.65 131.65) + (xy 125.65 131.55) + (xy 125.75 131.55) + (xy 125.75 131.45) + (xy 125.85 131.45) + (xy 125.85 131.35) + (xy 125.95 131.35) + (xy 125.95 131.25) + (xy 126.05 131.25) + (xy 126.05 131.15) + (xy 127.35 131.15) + (xy 127.35 131.05) + (xy 127.45 131.05) + (xy 127.45 130.95) + (xy 127.55 130.95) + (xy 127.55 129.65) + (xy 127.65 129.65) + (xy 127.65 129.45) + (xy 127.85 129.45) + (xy 127.85 129.35) + (xy 129.95 129.35) + (xy 129.95 129.45) + (xy 130.05 129.45) + (xy 130.05 129.55) + (xy 130.15 129.55) + (xy 130.15 131.95) + (xy 130.25 131.95) + (xy 130.25 132.05) + (xy 130.35 132.05) + (xy 130.35 132.15) + (xy 130.45 132.15) + (xy 130.45 132.05) + (xy 130.55 132.05) + (xy 130.55 131.95) + (xy 130.65 131.95) + (xy 130.65 131.85) + (xy 130.75 131.85) + (xy 130.75 131.75) + (xy 130.85 131.75) + (xy 130.85 131.65) + (xy 130.95 131.65) + (xy 130.95 131.55) + (xy 131.05 131.55) + (xy 131.05 131.45) + (xy 131.15 131.45) + (xy 131.15 131.35) + (xy 131.25 131.35) + (xy 131.25 131.25) + (xy 131.35 131.25) + (xy 131.35 131.15) + (xy 131.45 131.15) + (xy 131.45 131.05) + (xy 131.55 131.05) + (xy 131.55 130.95) + (xy 131.65 130.95) + (xy 131.65 130.85) + (xy 131.75 130.85) + (xy 131.75 130.75) + (xy 133.75 130.75) + (xy 133.75 130.65) + (xy 133.85 130.65) + (xy 133.85 130.55) + (xy 133.95 130.55) + (xy 133.95 129.35) + (xy 134.05 129.35) + (xy 134.05 129.25) + (xy 134.15 129.25) + (xy 134.15 129.15) + (xy 135.45 129.15) + (xy 135.45 129.25) + (xy 135.55 129.25) + (xy 135.55 129.45) + (xy 135.65 129.45) + (xy 135.65 129.65) + (xy 135.75 129.65) + (xy 135.75 129.75) + (xy 135.85 129.75) + (xy 135.85 129.85) + (xy 136.15 129.85) + (xy 136.15 129.95) + (xy 136.25 129.95) + (xy 136.25 130.05) + (xy 136.35 130.05) + (xy 136.35 130.15) + (xy 136.45 130.15) + (xy 136.45 130.55) + (xy 136.55 130.55) + (xy 136.55 130.65) + (xy 136.65 130.65) + (xy 136.65 130.75) + (xy 137.75 130.75) + (xy 137.75 130.65) + (xy 137.85 130.65) + (xy 137.85 130.55) + (xy 137.95 130.55) + (xy 137.95 129.35) + (xy 138.05 129.35) + (xy 138.05 129.25) + (xy 138.15 129.25) + (xy 138.15 129.15) + (xy 139.55 129.15) + (xy 139.55 129.05) + (xy 139.65 129.05) + (xy 139.65 128.95) + (xy 140.35 128.95) + (xy 140.35 129.05) + (xy 140.45 129.05) + (xy 140.45 129.15) + (xy 140.55 129.15) + (xy 140.55 129.25) + (xy 140.65 129.25) + (xy 140.65 129.75) + (xy 140.75 129.75) + (xy 140.75 129.85) + (xy 140.85 129.85) + (xy 140.85 129.95) + (xy 145.75 129.95) + (xy 145.75 129.85) + (xy 145.85 129.85) + (xy 145.85 129.75) + (xy 145.95 129.75) + (xy 145.95 128.85) + (xy 145.85 128.85) + (xy 145.85 128.75) + (xy 145.75 128.75) + (xy 145.75 128.65) + (xy 145.35 128.65) + (xy 145.35 128.55) + (xy 145.25 128.55) + (xy 145.25 128.45) + (xy 145.15 128.45) + (xy 145.15 128.35) + (xy 145.05 128.35) + (xy 145.05 127.65) + (xy 145.15 127.65) + (xy 145.15 127.55) + (xy 145.25 127.55) + (xy 145.25 119.45) + (xy 145.15 119.45) + (xy 145.15 119.35) + (xy 145.05 119.35) + (xy 145.05 119.25) + (xy 144.95 119.25) + (xy 144.95 119.15) + (xy 144.85 119.15) + (xy 144.85 119.05) + (xy 144.75 119.05) + (xy 144.75 118.95) + (xy 144.65 118.95) + (xy 144.65 118.85) + (xy 144.55 118.85) + (xy 144.55 118.75) + (xy 144.45 118.75) + (xy 144.45 118.65) + (xy 144.35 118.65) + (xy 144.35 118.55) + (xy 144.25 118.55) + (xy 144.25 118.45) + (xy 144.15 118.45) + (xy 144.15 118.35) + (xy 144.05 118.35) + (xy 144.05 118.25) + (xy 143.95 118.25) + (xy 143.95 118.15) + (xy 143.85 118.15) + (xy 143.85 118.05) + (xy 143.75 118.05) + (xy 143.75 117.95) + (xy 143.65 117.95) + (xy 143.65 117.85) + (xy 143.55 117.85) + (xy 143.55 117.75) + (xy 143.45 117.75) + (xy 143.45 117.65) + (xy 143.35 117.65) + (xy 143.35 117.55) + (xy 143.25 117.55) + (xy 143.25 117.45) + (xy 143.15 117.45) + (xy 143.15 117.35) + (xy 143.05 117.35) + (xy 143.05 117.25) + (xy 142.95 117.25) + (xy 142.95 117.15) + (xy 142.85 117.15) + (xy 142.85 117.05) + (xy 142.75 117.05) + (xy 142.75 116.95) + (xy 142.65 116.95) + (xy 142.65 116.85) + (xy 142.55 116.85) + (xy 142.55 116.75) + (xy 142.45 116.75) + (xy 142.45 116.65) + (xy 142.35 116.65) + (xy 142.35 116.55) + (xy 142.25 116.55) + (xy 142.25 116.45) + (xy 142.15 116.45) + (xy 142.15 116.35) + (xy 142.05 116.35) + (xy 142.05 116.25) + (xy 141.95 116.25) + (xy 141.95 116.15) + (xy 141.85 116.15) + (xy 141.85 116.05) + (xy 141.75 116.05) + (xy 141.75 115.95) + (xy 141.65 115.95) + (xy 141.65 115.85) + (xy 141.55 115.85) + (xy 141.55 115.75) + (xy 140.85 115.75) + (xy 140.85 115.65) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 154.05 121.25) + (xy 153.95 121.25) + (xy 153.95 121.35) + (xy 153.85 121.35) + (xy 153.85 121.45) + (xy 153.75 121.45) + (xy 153.75 121.55) + (xy 153.15 121.55) + (xy 153.15 121.65) + (xy 153.05 121.65) + (xy 153.05 121.75) + (xy 152.95 121.75) + (xy 152.95 121.85) + (xy 152.85 121.85) + (xy 152.85 121.95) + (xy 152.75 121.95) + (xy 152.75 122.05) + (xy 152.65 122.05) + (xy 152.65 122.15) + (xy 152.55 122.15) + (xy 152.55 122.25) + (xy 152.45 122.25) + (xy 152.45 122.35) + (xy 152.35 122.35) + (xy 152.35 122.45) + (xy 152.25 122.45) + (xy 152.25 122.55) + (xy 152.15 122.55) + (xy 152.15 122.65) + (xy 152.05 122.65) + (xy 152.05 122.75) + (xy 151.95 122.75) + (xy 151.95 122.85) + (xy 151.85 122.85) + (xy 151.85 122.95) + (xy 151.75 122.95) + (xy 151.75 123.05) + (xy 151.65 123.05) + (xy 151.65 123.15) + (xy 151.55 123.15) + (xy 151.55 123.25) + (xy 151.45 123.25) + (xy 151.45 123.35) + (xy 151.35 123.35) + (xy 151.35 123.45) + (xy 151.25 123.45) + (xy 151.25 123.55) + (xy 151.15 123.55) + (xy 151.15 123.65) + (xy 151.05 123.65) + (xy 151.05 123.75) + (xy 150.95 123.75) + (xy 150.95 123.85) + (xy 150.85 123.85) + (xy 150.85 123.95) + (xy 150.75 123.95) + (xy 150.75 124.05) + (xy 150.65 124.05) + (xy 150.65 124.15) + (xy 150.55 124.15) + (xy 150.55 124.25) + (xy 150.45 124.25) + (xy 150.45 124.35) + (xy 150.35 124.35) + (xy 150.35 124.45) + (xy 150.25 124.45) + (xy 150.25 124.55) + (xy 150.15 124.55) + (xy 150.15 124.65) + (xy 150.05 124.65) + (xy 150.05 124.75) + (xy 149.95 124.75) + (xy 149.95 124.85) + (xy 149.85 124.85) + (xy 149.85 124.95) + (xy 149.75 124.95) + (xy 149.75 125.05) + (xy 149.65 125.05) + (xy 149.65 125.15) + (xy 149.55 125.15) + (xy 149.55 125.25) + (xy 149.45 125.25) + (xy 149.45 125.35) + (xy 149.35 125.35) + (xy 149.35 125.45) + (xy 149.25 125.45) + (xy 149.25 125.55) + (xy 149.15 125.55) + (xy 149.15 125.65) + (xy 149.05 125.65) + (xy 149.05 125.75) + (xy 148.95 125.75) + (xy 148.95 125.85) + (xy 148.85 125.85) + (xy 148.85 125.95) + (xy 148.75 125.95) + (xy 148.75 126.05) + (xy 148.65 126.05) + (xy 148.65 126.15) + (xy 148.55 126.15) + (xy 148.55 126.25) + (xy 148.45 126.25) + (xy 148.45 126.35) + (xy 148.35 126.35) + (xy 148.35 126.45) + (xy 148.25 126.45) + (xy 148.25 126.55) + (xy 148.15 126.55) + (xy 148.15 126.65) + (xy 148.05 126.65) + (xy 148.05 126.75) + (xy 147.95 126.75) + (xy 147.95 126.85) + (xy 147.85 126.85) + (xy 147.85 126.95) + (xy 147.75 126.95) + (xy 147.75 127.05) + (xy 147.65 127.05) + (xy 147.65 127.15) + (xy 147.55 127.15) + (xy 147.55 127.25) + (xy 147.45 127.25) + (xy 147.45 127.35) + (xy 147.35 127.35) + (xy 147.35 127.45) + (xy 147.25 127.45) + (xy 147.25 127.55) + (xy 147.15 127.55) + (xy 147.15 127.65) + (xy 147.05 127.65) + (xy 147.05 129.25) + (xy 147.15 129.25) + (xy 147.15 129.35) + (xy 147.25 129.35) + (xy 147.25 129.45) + (xy 149.15 129.45) + (xy 149.15 129.55) + (xy 149.35 129.55) + (xy 149.35 129.65) + (xy 149.45 129.65) + (xy 149.45 129.75) + (xy 149.55 129.75) + (xy 149.55 129.85) + (xy 149.65 129.85) + (xy 149.65 129.95) + (xy 149.75 129.95) + (xy 149.75 130.05) + (xy 149.85 130.05) + (xy 149.85 130.15) + (xy 149.95 130.15) + (xy 149.95 130.25) + (xy 150.05 130.25) + (xy 150.05 130.35) + (xy 150.15 130.35) + (xy 150.15 130.45) + (xy 150.25 130.45) + (xy 150.25 130.55) + (xy 150.45 130.55) + (xy 150.45 130.65) + (xy 150.55 130.65) + (xy 150.55 130.75) + (xy 150.65 130.75) + (xy 150.65 130.85) + (xy 150.75 130.85) + (xy 150.75 131.25) + (xy 150.85 131.25) + (xy 150.85 131.35) + (xy 150.95 131.35) + (xy 150.95 131.45) + (xy 159.35 131.45) + (xy 159.35 131.35) + (xy 159.45 131.35) + (xy 159.45 131.25) + (xy 159.55 131.25) + (xy 159.55 131.15) + (xy 159.65 131.15) + (xy 159.65 131.05) + (xy 159.75 131.05) + (xy 159.75 130.95) + (xy 159.85 130.95) + (xy 159.85 130.85) + (xy 159.95 130.85) + (xy 159.95 130.75) + (xy 160.05 130.75) + (xy 160.05 130.65) + (xy 160.15 130.65) + (xy 160.15 130.15) + (xy 160.25 130.15) + (xy 160.25 130.05) + (xy 160.35 130.05) + (xy 160.35 129.95) + (xy 160.95 129.95) + (xy 160.95 129.85) + (xy 161.05 129.85) + (xy 161.05 129.75) + (xy 161.35 129.75) + (xy 161.35 129.65) + (xy 161.45 129.65) + (xy 161.45 129.55) + (xy 161.55 129.55) + (xy 161.55 129.45) + (xy 161.65 129.45) + (xy 161.65 129.35) + (xy 161.75 129.35) + (xy 161.75 129.25) + (xy 161.85 129.25) + (xy 161.85 129.15) + (xy 161.95 129.15) + (xy 161.95 129.05) + (xy 162.05 129.05) + (xy 162.05 128.95) + (xy 162.15 128.95) + (xy 162.15 128.85) + (xy 162.25 128.85) + (xy 162.25 128.75) + (xy 162.35 128.75) + (xy 162.35 128.65) + (xy 162.45 128.65) + (xy 162.45 128.15) + (xy 162.55 128.15) + (xy 162.55 128.05) + (xy 162.65 128.05) + (xy 162.65 127.95) + (xy 162.75 127.95) + (xy 162.75 127.85) + (xy 162.85 127.85) + (xy 162.85 127.75) + (xy 162.95 127.75) + (xy 162.95 127.65) + (xy 162.85 127.65) + (xy 162.85 127.55) + (xy 162.75 127.55) + (xy 162.75 127.45) + (xy 162.65 127.45) + (xy 162.65 127.35) + (xy 162.55 127.35) + (xy 162.55 127.25) + (xy 162.45 127.25) + (xy 162.45 127.15) + (xy 162.35 127.15) + (xy 162.35 127.05) + (xy 162.25 127.05) + (xy 162.25 126.95) + (xy 162.15 126.95) + (xy 162.15 126.85) + (xy 162.05 126.85) + (xy 162.05 126.75) + (xy 161.95 126.75) + (xy 161.95 126.65) + (xy 161.85 126.65) + (xy 161.85 126.55) + (xy 161.75 126.55) + (xy 161.75 126.45) + (xy 161.65 126.45) + (xy 161.65 126.35) + (xy 161.55 126.35) + (xy 161.55 126.25) + (xy 161.45 126.25) + (xy 161.45 126.15) + (xy 161.35 126.15) + (xy 161.35 126.05) + (xy 161.25 126.05) + (xy 161.25 125.95) + (xy 161.15 125.95) + (xy 161.15 125.85) + (xy 161.05 125.85) + (xy 161.05 125.75) + (xy 160.95 125.75) + (xy 160.95 125.65) + (xy 160.85 125.65) + (xy 160.85 125.55) + (xy 160.75 125.55) + (xy 160.75 125.45) + (xy 160.65 125.45) + (xy 160.65 125.35) + (xy 160.55 125.35) + (xy 160.55 125.25) + (xy 160.45 125.25) + (xy 160.45 125.15) + (xy 160.35 125.15) + (xy 160.35 125.05) + (xy 160.25 125.05) + (xy 160.25 124.95) + (xy 160.15 124.95) + (xy 160.15 124.85) + (xy 160.05 124.85) + (xy 160.05 124.75) + (xy 159.95 124.75) + (xy 159.95 124.65) + (xy 159.85 124.65) + (xy 159.85 124.55) + (xy 159.75 124.55) + (xy 159.75 124.45) + (xy 159.65 124.45) + (xy 159.65 124.35) + (xy 159.55 124.35) + (xy 159.55 124.25) + (xy 159.45 124.25) + (xy 159.45 124.15) + (xy 159.35 124.15) + (xy 159.35 124.05) + (xy 159.25 124.05) + (xy 159.25 123.95) + (xy 159.15 123.95) + (xy 159.15 123.85) + (xy 159.05 123.85) + (xy 159.05 123.75) + (xy 158.95 123.75) + (xy 158.95 123.65) + (xy 158.85 123.65) + (xy 158.85 123.55) + (xy 158.75 123.55) + (xy 158.75 123.45) + (xy 158.65 123.45) + (xy 158.65 123.35) + (xy 158.55 123.35) + (xy 158.55 123.25) + (xy 158.45 123.25) + (xy 158.45 123.15) + (xy 158.35 123.15) + (xy 158.35 123.05) + (xy 158.25 123.05) + (xy 158.25 122.95) + (xy 158.15 122.95) + (xy 158.15 122.85) + (xy 158.05 122.85) + (xy 158.05 122.75) + (xy 157.95 122.75) + (xy 157.95 122.65) + (xy 157.85 122.65) + (xy 157.85 122.55) + (xy 157.75 122.55) + (xy 157.75 122.45) + (xy 157.65 122.45) + (xy 157.65 122.35) + (xy 157.55 122.35) + (xy 157.55 122.25) + (xy 157.45 122.25) + (xy 157.45 122.15) + (xy 157.35 122.15) + (xy 157.35 122.05) + (xy 157.25 122.05) + (xy 157.25 121.95) + (xy 157.15 121.95) + (xy 157.15 121.85) + (xy 157.05 121.85) + (xy 157.05 121.75) + (xy 156.95 121.75) + (xy 156.95 121.65) + (xy 156.85 121.65) + (xy 156.85 121.55) + (xy 156.05 121.55) + (xy 156.05 121.45) + (xy 155.95 121.45) + (xy 155.95 121.35) + (xy 155.85 121.35) + (xy 155.85 121.25) + (xy 155.65 121.25) + (xy 155.65 121.35) + (xy 155.55 121.35) + (xy 155.55 121.45) + (xy 155.45 121.45) + (xy 155.45 121.55) + (xy 154.25 121.55) + (xy 154.25 121.45) + (xy 154.15 121.45) + (xy 154.15 121.35) + (xy 154.05 121.35) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 163.95 128.75) + (xy 163.95 128.85) + (xy 163.85 128.85) + (xy 163.85 128.95) + (xy 163.75 128.95) + (xy 163.75 129.15) + (xy 163.85 129.15) + (xy 163.85 129.25) + (xy 163.95 129.25) + (xy 163.95 129.35) + (xy 165.15 129.35) + (xy 165.15 129.25) + (xy 165.25 129.25) + (xy 165.25 129.15) + (xy 165.35 129.15) + (xy 165.35 129.05) + (xy 165.25 129.05) + (xy 165.25 128.95) + (xy 165.15 128.95) + (xy 165.15 128.85) + (xy 165.05 128.85) + (xy 165.05 128.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 168.25 128.75) + (xy 168.25 128.85) + (xy 168.15 128.85) + (xy 168.15 128.95) + (xy 168.05 128.95) + (xy 168.05 129.05) + (xy 167.95 129.05) + (xy 167.95 129.15) + (xy 167.85 129.15) + (xy 167.85 129.25) + (xy 167.75 129.25) + (xy 167.75 129.35) + (xy 167.65 129.35) + (xy 167.65 129.55) + (xy 167.55 129.55) + (xy 167.55 129.65) + (xy 167.45 129.65) + (xy 167.45 129.75) + (xy 165.85 129.75) + (xy 165.85 129.65) + (xy 165.65 129.65) + (xy 165.65 129.75) + (xy 165.55 129.75) + (xy 165.55 129.85) + (xy 165.45 129.85) + (xy 165.45 130.15) + (xy 165.55 130.15) + (xy 165.55 130.25) + (xy 165.65 130.25) + (xy 165.65 130.35) + (xy 165.85 130.35) + (xy 165.85 130.25) + (xy 167.45 130.25) + (xy 167.45 130.35) + (xy 169.15 130.35) + (xy 169.15 130.25) + (xy 169.25 130.25) + (xy 169.25 130.15) + (xy 169.35 130.15) + (xy 169.35 130.05) + (xy 169.45 130.05) + (xy 169.45 129.95) + (xy 169.35 129.95) + (xy 169.35 129.85) + (xy 169.25 129.85) + (xy 169.25 129.75) + (xy 169.15 129.75) + (xy 169.15 128.95) + (xy 169.05 128.95) + (xy 169.05 128.85) + (xy 168.95 128.85) + (xy 168.95 128.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 149.65 132.75) + (xy 149.65 132.85) + (xy 149.55 132.85) + (xy 149.55 132.95) + (xy 149.45 132.95) + (xy 149.45 133.35) + (xy 149.35 133.35) + (xy 149.35 133.45) + (xy 149.25 133.45) + (xy 149.25 133.55) + (xy 149.15 133.55) + (xy 149.15 133.65) + (xy 148.75 133.65) + (xy 148.75 133.75) + (xy 148.65 133.75) + (xy 148.65 133.85) + (xy 148.55 133.85) + (xy 148.55 133.95) + (xy 148.45 133.95) + (xy 148.45 134.05) + (xy 148.35 134.05) + (xy 148.35 134.15) + (xy 148.25 134.15) + (xy 148.25 139.05) + (xy 148.15 139.05) + (xy 148.15 139.15) + (xy 148.05 139.15) + (xy 148.05 139.25) + (xy 146.85 139.25) + (xy 146.85 139.15) + (xy 146.75 139.15) + (xy 146.75 139.25) + (xy 145.65 139.25) + (xy 145.65 139.15) + (xy 145.45 139.15) + (xy 145.45 139.25) + (xy 144.35 139.25) + (xy 144.35 139.15) + (xy 144.25 139.15) + (xy 144.25 139.25) + (xy 143.05 139.25) + (xy 143.05 139.15) + (xy 142.95 139.15) + (xy 142.95 139.25) + (xy 141.75 139.25) + (xy 141.75 139.15) + (xy 141.65 139.15) + (xy 141.65 139.25) + (xy 140.55 139.25) + (xy 140.55 139.15) + (xy 140.35 139.15) + (xy 140.35 139.25) + (xy 139.25 139.25) + (xy 139.25 139.15) + (xy 139.15 139.15) + (xy 139.15 139.25) + (xy 137.95 139.25) + (xy 137.95 139.15) + (xy 137.85 139.15) + (xy 137.85 139.25) + (xy 136.75 139.25) + (xy 136.75 139.35) + (xy 136.65 139.35) + (xy 136.65 139.45) + (xy 136.55 139.45) + (xy 136.55 145.85) + (xy 136.45 145.85) + (xy 136.45 145.95) + (xy 136.35 145.95) + (xy 136.35 146.05) + (xy 136.25 146.05) + (xy 136.25 146.15) + (xy 136.15 146.15) + (xy 136.15 146.25) + (xy 136.05 146.25) + (xy 136.05 146.35) + (xy 135.95 146.35) + (xy 135.95 146.45) + (xy 135.85 146.45) + (xy 135.85 146.55) + (xy 135.75 146.55) + (xy 135.75 146.65) + (xy 135.65 146.65) + (xy 135.65 146.75) + (xy 135.55 146.75) + (xy 135.55 146.85) + (xy 135.45 146.85) + (xy 135.45 146.95) + (xy 135.35 146.95) + (xy 135.35 148.15) + (xy 135.45 148.15) + (xy 135.45 148.25) + (xy 135.55 148.25) + (xy 135.55 148.35) + (xy 135.95 148.35) + (xy 135.95 148.45) + (xy 136.05 148.45) + (xy 136.05 148.55) + (xy 136.15 148.55) + (xy 136.15 148.65) + (xy 136.25 148.65) + (xy 136.25 149.05) + (xy 136.35 149.05) + (xy 136.35 149.15) + (xy 136.45 149.15) + (xy 136.45 149.25) + (xy 136.55 149.25) + (xy 136.55 149.35) + (xy 136.65 149.35) + (xy 136.65 149.45) + (xy 136.75 149.45) + (xy 136.75 149.55) + (xy 136.85 149.55) + (xy 136.85 149.65) + (xy 136.95 149.65) + (xy 136.95 149.75) + (xy 137.05 149.75) + (xy 137.05 149.85) + (xy 137.15 149.85) + (xy 137.15 149.95) + (xy 137.25 149.95) + (xy 137.25 150.05) + (xy 137.35 150.05) + (xy 137.35 150.15) + (xy 137.45 150.15) + (xy 137.45 150.25) + (xy 137.55 150.25) + (xy 137.55 150.35) + (xy 137.65 150.35) + (xy 137.65 150.45) + (xy 137.75 150.45) + (xy 137.75 150.55) + (xy 137.85 150.55) + (xy 137.85 150.65) + (xy 137.95 150.65) + (xy 137.95 150.75) + (xy 138.05 150.75) + (xy 138.05 150.85) + (xy 138.15 150.85) + (xy 138.15 150.95) + (xy 138.25 150.95) + (xy 138.25 151.05) + (xy 138.35 151.05) + (xy 138.35 151.15) + (xy 138.45 151.15) + (xy 138.45 151.25) + (xy 138.55 151.25) + (xy 138.55 151.35) + (xy 138.65 151.35) + (xy 138.65 151.45) + (xy 138.75 151.45) + (xy 138.75 151.55) + (xy 138.85 151.55) + (xy 138.85 151.65) + (xy 138.95 151.65) + (xy 138.95 151.75) + (xy 139.05 151.75) + (xy 139.05 151.85) + (xy 139.15 151.85) + (xy 139.15 151.95) + (xy 139.25 151.95) + (xy 139.25 152.05) + (xy 139.35 152.05) + (xy 139.35 152.15) + (xy 139.45 152.15) + (xy 139.45 152.25) + (xy 139.55 152.25) + (xy 139.55 152.35) + (xy 139.65 152.35) + (xy 139.65 152.45) + (xy 150.45 152.45) + (xy 150.45 152.35) + (xy 150.55 152.35) + (xy 150.55 152.25) + (xy 150.65 152.25) + (xy 150.65 149.55) + (xy 150.55 149.55) + (xy 150.55 149.45) + (xy 150.45 149.45) + (xy 150.45 149.35) + (xy 150.35 149.35) + (xy 150.35 149.25) + (xy 150.25 149.25) + (xy 150.25 149.15) + (xy 150.15 149.15) + (xy 150.15 149.05) + (xy 150.05 149.05) + (xy 150.05 148.95) + (xy 149.95 148.95) + (xy 149.95 141.25) + (xy 149.85 141.25) + (xy 149.85 141.15) + (xy 149.75 141.15) + (xy 149.75 140.45) + (xy 149.85 140.45) + (xy 149.85 140.35) + (xy 149.95 140.35) + (xy 149.95 140.25) + (xy 150.05 140.25) + (xy 150.05 140.15) + (xy 150.15 140.15) + (xy 150.15 138.25) + (xy 150.25 138.25) + (xy 150.25 138.15) + (xy 150.35 138.15) + (xy 150.35 138.05) + (xy 150.45 138.05) + (xy 150.45 137.95) + (xy 150.55 137.95) + (xy 150.55 137.85) + (xy 150.65 137.85) + (xy 150.65 137.75) + (xy 150.75 137.75) + (xy 150.75 137.65) + (xy 150.85 137.65) + (xy 150.85 137.55) + (xy 150.95 137.55) + (xy 150.95 137.45) + (xy 151.05 137.45) + (xy 151.05 137.35) + (xy 151.15 137.35) + (xy 151.15 137.25) + (xy 151.25 137.25) + (xy 151.25 137.15) + (xy 151.35 137.15) + (xy 151.35 137.05) + (xy 151.45 137.05) + (xy 151.45 136.95) + (xy 151.55 136.95) + (xy 151.55 136.55) + (xy 151.65 136.55) + (xy 151.65 136.45) + (xy 151.75 136.45) + (xy 151.75 136.35) + (xy 151.85 136.35) + (xy 151.85 136.25) + (xy 152.25 136.25) + (xy 152.25 136.15) + (xy 152.35 136.15) + (xy 152.35 136.05) + (xy 152.45 136.05) + (xy 152.45 135.65) + (xy 152.35 135.65) + (xy 152.35 135.55) + (xy 152.25 135.55) + (xy 152.25 134.85) + (xy 152.35 134.85) + (xy 152.35 134.75) + (xy 152.45 134.75) + (xy 152.45 134.65) + (xy 152.55 134.65) + (xy 152.55 134.45) + (xy 152.45 134.45) + (xy 152.45 134.35) + (xy 152.35 134.35) + (xy 152.35 134.25) + (xy 152.25 134.25) + (xy 152.25 134.15) + (xy 152.15 134.15) + (xy 152.15 134.05) + (xy 152.05 134.05) + (xy 152.05 133.95) + (xy 151.95 133.95) + (xy 151.95 133.85) + (xy 151.85 133.85) + (xy 151.85 133.75) + (xy 151.75 133.75) + (xy 151.75 133.65) + (xy 151.55 133.65) + (xy 151.55 133.55) + (xy 151.45 133.55) + (xy 151.45 133.45) + (xy 151.35 133.45) + (xy 151.35 133.35) + (xy 151.25 133.35) + (xy 151.25 132.95) + (xy 151.15 132.95) + (xy 151.15 132.85) + (xy 151.05 132.85) + (xy 151.05 132.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 152.95 132.75) + (xy 152.95 132.85) + (xy 152.85 132.85) + (xy 152.85 132.95) + (xy 152.75 132.95) + (xy 152.75 133.05) + (xy 152.85 133.05) + (xy 152.85 133.15) + (xy 152.95 133.15) + (xy 152.95 133.25) + (xy 153.05 133.25) + (xy 153.05 133.35) + (xy 153.15 133.35) + (xy 153.15 133.45) + (xy 153.25 133.45) + (xy 153.25 133.55) + (xy 153.35 133.55) + (xy 153.35 133.65) + (xy 153.45 133.65) + (xy 153.45 133.75) + (xy 153.55 133.75) + (xy 153.55 133.85) + (xy 153.65 133.85) + (xy 153.65 133.95) + (xy 153.75 133.95) + (xy 153.75 134.05) + (xy 153.85 134.05) + (xy 153.85 134.15) + (xy 153.95 134.15) + (xy 153.95 134.25) + (xy 154.05 134.25) + (xy 154.05 134.35) + (xy 154.15 134.35) + (xy 154.15 134.45) + (xy 154.25 134.45) + (xy 154.25 134.55) + (xy 154.35 134.55) + (xy 154.35 134.65) + (xy 154.45 134.65) + (xy 154.45 134.75) + (xy 154.55 134.75) + (xy 154.55 134.85) + (xy 154.65 134.85) + (xy 154.65 134.95) + (xy 154.75 134.95) + (xy 154.75 135.05) + (xy 154.85 135.05) + (xy 154.85 135.15) + (xy 154.95 135.15) + (xy 154.95 135.25) + (xy 155.05 135.25) + (xy 155.05 135.35) + (xy 155.15 135.35) + (xy 155.15 135.45) + (xy 155.25 135.45) + (xy 155.25 135.55) + (xy 155.35 135.55) + (xy 155.35 135.65) + (xy 155.45 135.65) + (xy 155.45 135.75) + (xy 155.55 135.75) + (xy 155.55 135.85) + (xy 155.65 135.85) + (xy 155.65 135.95) + (xy 155.75 135.95) + (xy 155.75 136.05) + (xy 155.85 136.05) + (xy 155.85 136.15) + (xy 155.95 136.15) + (xy 155.95 136.25) + (xy 156.05 136.25) + (xy 156.05 136.35) + (xy 156.15 136.35) + (xy 156.15 136.45) + (xy 156.25 136.45) + (xy 156.25 136.55) + (xy 156.35 136.55) + (xy 156.35 136.65) + (xy 156.45 136.65) + (xy 156.45 136.75) + (xy 156.55 136.75) + (xy 156.55 136.85) + (xy 156.65 136.85) + (xy 156.65 136.95) + (xy 156.75 136.95) + (xy 156.75 137.05) + (xy 156.85 137.05) + (xy 156.85 137.15) + (xy 156.95 137.15) + (xy 156.95 137.25) + (xy 157.05 137.25) + (xy 157.05 137.35) + (xy 157.15 137.35) + (xy 157.15 137.45) + (xy 157.25 137.45) + (xy 157.25 137.55) + (xy 157.35 137.55) + (xy 157.35 137.65) + (xy 157.45 137.65) + (xy 157.45 137.75) + (xy 157.55 137.75) + (xy 157.55 137.85) + (xy 157.65 137.85) + (xy 157.65 137.95) + (xy 157.75 137.95) + (xy 157.75 138.05) + (xy 157.85 138.05) + (xy 157.85 138.15) + (xy 157.95 138.15) + (xy 157.95 138.25) + (xy 158.05 138.25) + (xy 158.05 138.35) + (xy 158.15 138.35) + (xy 158.15 138.45) + (xy 158.25 138.45) + (xy 158.25 138.55) + (xy 158.35 138.55) + (xy 158.35 138.65) + (xy 158.45 138.65) + (xy 158.45 138.75) + (xy 158.55 138.75) + (xy 158.55 138.85) + (xy 158.65 138.85) + (xy 158.65 138.95) + (xy 158.75 138.95) + (xy 158.75 139.05) + (xy 158.85 139.05) + (xy 158.85 139.15) + (xy 158.95 139.15) + (xy 158.95 139.25) + (xy 159.05 139.25) + (xy 159.05 139.35) + (xy 159.15 139.35) + (xy 159.15 139.45) + (xy 159.25 139.45) + (xy 159.25 139.55) + (xy 160.45 139.55) + (xy 160.45 139.65) + (xy 160.65 139.65) + (xy 160.65 139.75) + (xy 160.75 139.75) + (xy 160.75 139.85) + (xy 160.95 139.85) + (xy 160.95 139.75) + (xy 161.05 139.75) + (xy 161.05 139.65) + (xy 161.15 139.65) + (xy 161.15 139.55) + (xy 161.25 139.55) + (xy 161.25 139.45) + (xy 161.35 139.45) + (xy 161.35 139.35) + (xy 161.45 139.35) + (xy 161.45 138.65) + (xy 161.35 138.65) + (xy 161.35 138.55) + (xy 161.25 138.55) + (xy 161.25 138.45) + (xy 161.15 138.45) + (xy 161.15 138.35) + (xy 161.05 138.35) + (xy 161.05 138.25) + (xy 160.95 138.25) + (xy 160.95 138.15) + (xy 160.85 138.15) + (xy 160.85 138.05) + (xy 160.75 138.05) + (xy 160.75 137.95) + (xy 160.65 137.95) + (xy 160.65 137.85) + (xy 160.55 137.85) + (xy 160.55 137.75) + (xy 160.45 137.75) + (xy 160.45 137.65) + (xy 160.35 137.65) + (xy 160.35 137.55) + (xy 160.25 137.55) + (xy 160.25 137.45) + (xy 160.15 137.45) + (xy 160.15 137.35) + (xy 160.05 137.35) + (xy 160.05 137.25) + (xy 159.95 137.25) + (xy 159.95 137.15) + (xy 159.85 137.15) + (xy 159.85 137.05) + (xy 159.75 137.05) + (xy 159.75 136.95) + (xy 159.65 136.95) + (xy 159.65 136.85) + (xy 159.55 136.85) + (xy 159.55 136.75) + (xy 159.45 136.75) + (xy 159.45 136.65) + (xy 159.35 136.65) + (xy 159.35 136.55) + (xy 159.25 136.55) + (xy 159.25 136.45) + (xy 159.15 136.45) + (xy 159.15 136.35) + (xy 159.05 136.35) + (xy 159.05 136.25) + (xy 158.95 136.25) + (xy 158.95 132.95) + (xy 158.85 132.95) + (xy 158.85 132.85) + (xy 158.75 132.85) + (xy 158.75 132.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 153.65 135.55) + (xy 153.55 135.55) + (xy 153.55 135.65) + (xy 153.45 135.65) + (xy 153.45 135.75) + (xy 153.35 135.75) + (xy 153.35 141.45) + (xy 153.25 141.45) + (xy 153.25 141.55) + (xy 153.15 141.55) + (xy 153.15 141.65) + (xy 153.05 141.65) + (xy 153.05 141.75) + (xy 152.95 141.75) + (xy 152.95 141.85) + (xy 152.85 141.85) + (xy 152.85 143.15) + (xy 152.95 143.15) + (xy 152.95 143.25) + (xy 153.05 143.25) + (xy 153.05 143.35) + (xy 153.35 143.35) + (xy 153.35 143.45) + (xy 153.45 143.45) + (xy 153.45 143.55) + (xy 153.55 143.55) + (xy 153.55 143.65) + (xy 153.75 143.65) + (xy 153.75 143.55) + (xy 153.85 143.55) + (xy 153.85 143.45) + (xy 153.95 143.45) + (xy 153.95 143.35) + (xy 154.05 143.35) + (xy 154.05 143.25) + (xy 154.15 143.25) + (xy 154.15 143.15) + (xy 154.25 143.15) + (xy 154.25 143.05) + (xy 154.35 143.05) + (xy 154.35 142.95) + (xy 154.45 142.95) + (xy 154.45 142.85) + (xy 154.55 142.85) + (xy 154.55 142.75) + (xy 154.65 142.75) + (xy 154.65 142.65) + (xy 154.75 142.65) + (xy 154.75 142.55) + (xy 154.85 142.55) + (xy 154.85 142.45) + (xy 154.95 142.45) + (xy 154.95 142.35) + (xy 155.05 142.35) + (xy 155.05 142.25) + (xy 155.15 142.25) + (xy 155.15 142.15) + (xy 155.25 142.15) + (xy 155.25 142.05) + (xy 155.35 142.05) + (xy 155.35 141.95) + (xy 155.45 141.95) + (xy 155.45 141.85) + (xy 155.55 141.85) + (xy 155.55 141.75) + (xy 155.65 141.75) + (xy 155.65 141.65) + (xy 155.75 141.65) + (xy 155.75 141.55) + (xy 155.85 141.55) + (xy 155.85 141.45) + (xy 155.95 141.45) + (xy 155.95 141.35) + (xy 156.05 141.35) + (xy 156.05 141.25) + (xy 156.15 141.25) + (xy 156.15 141.15) + (xy 156.25 141.15) + (xy 156.25 141.05) + (xy 156.35 141.05) + (xy 156.35 140.95) + (xy 156.45 140.95) + (xy 156.45 140.85) + (xy 156.55 140.85) + (xy 156.55 140.75) + (xy 156.65 140.75) + (xy 156.65 140.65) + (xy 156.75 140.65) + (xy 156.75 140.55) + (xy 156.85 140.55) + (xy 156.85 140.45) + (xy 156.95 140.45) + (xy 156.95 140.35) + (xy 157.05 140.35) + (xy 157.05 140.25) + (xy 157.15 140.25) + (xy 157.15 139.85) + (xy 157.25 139.85) + (xy 157.25 139.75) + (xy 157.35 139.75) + (xy 157.35 139.65) + (xy 157.45 139.65) + (xy 157.45 139.55) + (xy 157.55 139.55) + (xy 157.55 139.45) + (xy 157.45 139.45) + (xy 157.45 139.35) + (xy 157.35 139.35) + (xy 157.35 139.25) + (xy 157.25 139.25) + (xy 157.25 139.15) + (xy 157.15 139.15) + (xy 157.15 139.05) + (xy 157.05 139.05) + (xy 157.05 138.95) + (xy 156.95 138.95) + (xy 156.95 138.85) + (xy 156.85 138.85) + (xy 156.85 138.75) + (xy 156.75 138.75) + (xy 156.75 138.65) + (xy 156.65 138.65) + (xy 156.65 138.55) + (xy 156.55 138.55) + (xy 156.55 138.45) + (xy 156.45 138.45) + (xy 156.45 138.35) + (xy 156.35 138.35) + (xy 156.35 138.25) + (xy 156.25 138.25) + (xy 156.25 138.15) + (xy 156.15 138.15) + (xy 156.15 138.05) + (xy 156.05 138.05) + (xy 156.05 137.95) + (xy 155.95 137.95) + (xy 155.95 137.85) + (xy 155.85 137.85) + (xy 155.85 137.75) + (xy 155.75 137.75) + (xy 155.75 137.65) + (xy 155.65 137.65) + (xy 155.65 137.55) + (xy 155.55 137.55) + (xy 155.55 137.45) + (xy 155.45 137.45) + (xy 155.45 137.35) + (xy 155.35 137.35) + (xy 155.35 137.25) + (xy 155.25 137.25) + (xy 155.25 137.15) + (xy 155.15 137.15) + (xy 155.15 137.05) + (xy 155.05 137.05) + (xy 155.05 136.95) + (xy 154.95 136.95) + (xy 154.95 136.85) + (xy 154.85 136.85) + (xy 154.85 136.75) + (xy 154.75 136.75) + (xy 154.75 136.65) + (xy 154.65 136.65) + (xy 154.65 136.55) + (xy 154.55 136.55) + (xy 154.55 136.45) + (xy 154.45 136.45) + (xy 154.45 136.35) + (xy 154.35 136.35) + (xy 154.35 136.25) + (xy 154.25 136.25) + (xy 154.25 136.15) + (xy 154.15 136.15) + (xy 154.15 136.05) + (xy 154.05 136.05) + (xy 154.05 135.95) + (xy 153.95 135.95) + (xy 153.95 135.85) + (xy 153.85 135.85) + (xy 153.85 135.75) + (xy 153.75 135.75) + (xy 153.75 135.65) + (xy 153.65 135.65) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 158.25 140.75) + (xy 158.15 140.75) + (xy 158.15 140.85) + (xy 157.75 140.85) + (xy 157.75 140.95) + (xy 157.65 140.95) + (xy 157.65 141.05) + (xy 157.55 141.05) + (xy 157.55 141.15) + (xy 157.45 141.15) + (xy 157.45 141.25) + (xy 157.35 141.25) + (xy 157.35 141.35) + (xy 157.25 141.35) + (xy 157.25 141.45) + (xy 157.15 141.45) + (xy 157.15 141.55) + (xy 157.05 141.55) + (xy 157.05 141.65) + (xy 156.95 141.65) + (xy 156.95 141.75) + (xy 156.85 141.75) + (xy 156.85 141.85) + (xy 156.75 141.85) + (xy 156.75 141.95) + (xy 156.65 141.95) + (xy 156.65 142.05) + (xy 156.55 142.05) + (xy 156.55 142.15) + (xy 156.45 142.15) + (xy 156.45 142.25) + (xy 156.35 142.25) + (xy 156.35 142.35) + (xy 156.25 142.35) + (xy 156.25 142.45) + (xy 156.15 142.45) + (xy 156.15 142.55) + (xy 156.05 142.55) + (xy 156.05 142.65) + (xy 155.95 142.65) + (xy 155.95 142.75) + (xy 155.85 142.75) + (xy 155.85 142.85) + (xy 155.75 142.85) + (xy 155.75 142.95) + (xy 155.65 142.95) + (xy 155.65 143.05) + (xy 155.55 143.05) + (xy 155.55 143.15) + (xy 155.45 143.15) + (xy 155.45 143.25) + (xy 155.35 143.25) + (xy 155.35 143.35) + (xy 155.25 143.35) + (xy 155.25 143.45) + (xy 155.15 143.45) + (xy 155.15 143.55) + (xy 155.05 143.55) + (xy 155.05 143.65) + (xy 154.95 143.65) + (xy 154.95 143.75) + (xy 154.85 143.75) + (xy 154.85 143.85) + (xy 154.75 143.85) + (xy 154.75 143.95) + (xy 154.65 143.95) + (xy 154.65 144.05) + (xy 154.55 144.05) + (xy 154.55 144.15) + (xy 154.45 144.15) + (xy 154.45 144.25) + (xy 154.35 144.25) + (xy 154.35 144.35) + (xy 154.25 144.35) + (xy 154.25 144.45) + (xy 154.15 144.45) + (xy 154.15 144.55) + (xy 154.05 144.55) + (xy 154.05 144.65) + (xy 153.95 144.65) + (xy 153.95 144.75) + (xy 153.85 144.75) + (xy 153.85 144.85) + (xy 153.75 144.85) + (xy 153.75 144.95) + (xy 153.65 144.95) + (xy 153.65 145.05) + (xy 153.55 145.05) + (xy 153.55 145.15) + (xy 153.45 145.15) + (xy 153.45 145.25) + (xy 153.35 145.25) + (xy 153.35 145.35) + (xy 153.25 145.35) + (xy 153.25 145.45) + (xy 153.15 145.45) + (xy 153.15 145.55) + (xy 153.05 145.55) + (xy 153.05 145.65) + (xy 152.95 145.65) + (xy 152.95 145.75) + (xy 152.85 145.75) + (xy 152.85 146.75) + (xy 152.95 146.75) + (xy 152.95 146.85) + (xy 153.05 146.85) + (xy 153.05 146.95) + (xy 157.45 146.95) + (xy 157.45 146.85) + (xy 157.55 146.85) + (xy 157.55 146.75) + (xy 158.25 146.75) + (xy 158.25 146.85) + (xy 158.35 146.85) + (xy 158.35 146.95) + (xy 158.45 146.95) + (xy 158.45 147.05) + (xy 158.65 147.05) + (xy 158.65 146.95) + (xy 158.75 146.95) + (xy 158.75 146.85) + (xy 158.85 146.85) + (xy 158.85 146.75) + (xy 158.95 146.75) + (xy 158.95 146.65) + (xy 159.05 146.65) + (xy 159.05 146.55) + (xy 159.15 146.55) + (xy 159.15 146.45) + (xy 159.25 146.45) + (xy 159.25 146.35) + (xy 159.35 146.35) + (xy 159.35 146.25) + (xy 159.45 146.25) + (xy 159.45 146.15) + (xy 159.55 146.15) + (xy 159.55 146.05) + (xy 159.45 146.05) + (xy 159.45 145.95) + (xy 159.35 145.95) + (xy 159.35 145.85) + (xy 158.75 145.85) + (xy 158.75 145.75) + (xy 158.55 145.75) + (xy 158.55 145.55) + (xy 158.45 145.55) + (xy 158.45 144.35) + (xy 158.55 144.35) + (xy 158.55 144.15) + (xy 158.75 144.15) + (xy 158.75 144.05) + (xy 159.75 144.05) + (xy 159.75 143.95) + (xy 159.85 143.95) + (xy 159.85 143.85) + (xy 159.95 143.85) + (xy 159.95 143.75) + (xy 160.05 143.75) + (xy 160.05 143.65) + (xy 160.15 143.65) + (xy 160.15 143.55) + (xy 160.25 143.55) + (xy 160.25 143.45) + (xy 160.35 143.45) + (xy 160.35 142.75) + (xy 160.25 142.75) + (xy 160.25 142.65) + (xy 160.15 142.65) + (xy 160.15 142.55) + (xy 159.75 142.55) + (xy 159.75 142.45) + (xy 159.65 142.45) + (xy 159.65 142.35) + (xy 159.55 142.35) + (xy 159.55 142.25) + (xy 159.45 142.25) + (xy 159.45 141.55) + (xy 159.35 141.55) + (xy 159.35 141.45) + (xy 159.25 141.45) + (xy 159.25 141.35) + (xy 158.75 141.35) + (xy 158.75 141.25) + (xy 158.55 141.25) + (xy 158.55 141.05) + (xy 158.45 141.05) + (xy 158.45 140.95) + (xy 158.35 140.95) + (xy 158.35 140.85) + (xy 158.25 140.85) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 110.35 146.65) + (xy 110.35 146.75) + (xy 110.25 146.75) + (xy 110.25 146.85) + (xy 110.15 146.85) + (xy 110.15 146.95) + (xy 110.05 146.95) + (xy 110.05 147.05) + (xy 109.95 147.05) + (xy 109.95 147.15) + (xy 109.25 147.15) + (xy 109.25 147.05) + (xy 108.35 147.05) + (xy 108.35 147.15) + (xy 108.25 147.15) + (xy 108.25 147.25) + (xy 108.15 147.25) + (xy 108.15 147.35) + (xy 108.25 147.35) + (xy 108.25 147.45) + (xy 108.35 147.45) + (xy 108.35 147.55) + (xy 108.55 147.55) + (xy 108.55 147.65) + (xy 108.65 147.65) + (xy 108.65 147.75) + (xy 108.75 147.75) + (xy 108.75 147.85) + (xy 108.85 147.85) + (xy 108.85 148.25) + (xy 108.95 148.25) + (xy 108.95 148.35) + (xy 109.05 148.35) + (xy 109.05 148.45) + (xy 109.15 148.45) + (xy 109.15 148.55) + (xy 109.25 148.55) + (xy 109.25 148.65) + (xy 109.35 148.65) + (xy 109.35 148.75) + (xy 109.45 148.75) + (xy 109.45 148.85) + (xy 109.55 148.85) + (xy 109.55 148.95) + (xy 109.65 148.95) + (xy 109.65 149.05) + (xy 109.75 149.05) + (xy 109.75 149.15) + (xy 109.85 149.15) + (xy 109.85 149.25) + (xy 109.95 149.25) + (xy 109.95 149.35) + (xy 110.05 149.35) + (xy 110.05 149.45) + (xy 110.15 149.45) + (xy 110.15 149.55) + (xy 110.25 149.55) + (xy 110.25 149.65) + (xy 110.35 149.65) + (xy 110.35 149.75) + (xy 112.65 149.75) + (xy 112.65 149.85) + (xy 112.85 149.85) + (xy 112.85 149.75) + (xy 112.95 149.75) + (xy 112.95 149.65) + (xy 113.05 149.65) + (xy 113.05 149.35) + (xy 112.95 149.35) + (xy 112.95 149.25) + (xy 112.85 149.25) + (xy 112.85 149.15) + (xy 112.65 149.15) + (xy 112.65 149.25) + (xy 111.05 149.25) + (xy 111.05 149.15) + (xy 110.95 149.15) + (xy 110.95 149.05) + (xy 110.85 149.05) + (xy 110.85 148.05) + (xy 110.95 148.05) + (xy 110.95 147.95) + (xy 111.05 147.95) + (xy 111.05 146.85) + (xy 110.95 146.85) + (xy 110.95 146.75) + (xy 110.85 146.75) + (xy 110.85 146.65) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 135.65 149.65) + (xy 135.55 149.65) + (xy 135.55 149.75) + (xy 135.45 149.75) + (xy 135.45 149.85) + (xy 135.35 149.85) + (xy 135.35 155.25) + (xy 135.25 155.25) + (xy 135.25 155.35) + (xy 135.05 155.35) + (xy 135.05 155.45) + (xy 133.45 155.45) + (xy 133.45 155.35) + (xy 133.25 155.35) + (xy 133.25 155.25) + (xy 133.15 155.25) + (xy 133.15 152.75) + (xy 133.05 152.75) + (xy 133.05 152.65) + (xy 132.95 152.65) + (xy 132.95 152.55) + (xy 130.65 152.55) + (xy 130.65 152.65) + (xy 130.55 152.65) + (xy 130.55 152.75) + (xy 130.45 152.75) + (xy 130.45 153.15) + (xy 130.35 153.15) + (xy 130.35 153.25) + (xy 130.25 153.25) + (xy 130.25 153.35) + (xy 130.15 153.35) + (xy 130.15 153.45) + (xy 129.75 153.45) + (xy 129.75 153.55) + (xy 129.65 153.55) + (xy 129.65 153.65) + (xy 129.55 153.65) + (xy 129.55 153.75) + (xy 129.45 153.75) + (xy 129.45 153.85) + (xy 129.35 153.85) + (xy 129.35 153.95) + (xy 129.25 153.95) + (xy 129.25 154.05) + (xy 129.15 154.05) + (xy 129.15 154.15) + (xy 127.25 154.15) + (xy 127.25 154.25) + (xy 127.15 154.25) + (xy 127.15 154.35) + (xy 127.05 154.35) + (xy 127.05 154.45) + (xy 126.95 154.45) + (xy 126.95 154.55) + (xy 126.85 154.55) + (xy 126.85 154.65) + (xy 126.75 154.65) + (xy 126.75 154.75) + (xy 126.65 154.75) + (xy 126.65 155.95) + (xy 126.55 155.95) + (xy 126.55 156.15) + (xy 126.35 156.15) + (xy 126.35 156.25) + (xy 126.25 156.25) + (xy 126.25 156.35) + (xy 126.15 156.35) + (xy 126.15 156.45) + (xy 126.25 156.45) + (xy 126.25 156.55) + (xy 126.35 156.55) + (xy 126.35 156.65) + (xy 153.95 156.65) + (xy 153.95 156.55) + (xy 154.05 156.55) + (xy 154.05 156.45) + (xy 154.15 156.45) + (xy 154.15 155.95) + (xy 154.05 155.95) + (xy 154.05 155.85) + (xy 153.95 155.85) + (xy 153.95 155.75) + (xy 153.85 155.75) + (xy 153.85 155.65) + (xy 153.75 155.65) + (xy 153.75 155.55) + (xy 153.65 155.55) + (xy 153.65 155.45) + (xy 153.55 155.45) + (xy 153.55 155.35) + (xy 153.45 155.35) + (xy 153.45 155.25) + (xy 153.35 155.25) + (xy 153.35 155.15) + (xy 153.25 155.15) + (xy 153.25 155.05) + (xy 153.15 155.05) + (xy 153.15 154.95) + (xy 153.05 154.95) + (xy 153.05 155.05) + (xy 152.95 155.05) + (xy 152.95 155.15) + (xy 152.85 155.15) + (xy 152.85 155.25) + (xy 152.75 155.25) + (xy 152.75 155.35) + (xy 152.55 155.35) + (xy 152.55 155.45) + (xy 150.95 155.45) + (xy 150.95 155.35) + (xy 150.75 155.35) + (xy 150.75 155.25) + (xy 150.65 155.25) + (xy 150.65 153.55) + (xy 150.55 153.55) + (xy 150.55 153.45) + (xy 150.45 153.45) + (xy 150.45 153.35) + (xy 139.25 153.35) + (xy 139.25 153.25) + (xy 139.15 153.25) + (xy 139.15 153.15) + (xy 139.05 153.15) + (xy 139.05 153.05) + (xy 138.95 153.05) + (xy 138.95 152.95) + (xy 138.85 152.95) + (xy 138.85 152.85) + (xy 138.75 152.85) + (xy 138.75 152.75) + (xy 138.65 152.75) + (xy 138.65 152.65) + (xy 138.55 152.65) + (xy 138.55 152.55) + (xy 138.45 152.55) + (xy 138.45 152.45) + (xy 138.35 152.45) + (xy 138.35 152.35) + (xy 138.25 152.35) + (xy 138.25 152.25) + (xy 138.15 152.25) + (xy 138.15 152.15) + (xy 138.05 152.15) + (xy 138.05 152.05) + (xy 137.95 152.05) + (xy 137.95 151.95) + (xy 137.85 151.95) + (xy 137.85 151.85) + (xy 137.75 151.85) + (xy 137.75 151.75) + (xy 137.65 151.75) + (xy 137.65 151.65) + (xy 137.55 151.65) + (xy 137.55 151.55) + (xy 137.45 151.55) + (xy 137.45 151.45) + (xy 137.35 151.45) + (xy 137.35 151.35) + (xy 137.25 151.35) + (xy 137.25 151.25) + (xy 137.15 151.25) + (xy 137.15 151.15) + (xy 137.05 151.15) + (xy 137.05 151.05) + (xy 136.95 151.05) + (xy 136.95 150.95) + (xy 136.85 150.95) + (xy 136.85 150.85) + (xy 136.75 150.85) + (xy 136.75 150.75) + (xy 136.65 150.75) + (xy 136.65 150.65) + (xy 136.55 150.65) + (xy 136.55 150.55) + (xy 136.45 150.55) + (xy 136.45 150.45) + (xy 136.35 150.45) + (xy 136.35 150.35) + (xy 136.25 150.35) + (xy 136.25 150.25) + (xy 136.15 150.25) + (xy 136.15 150.15) + (xy 136.05 150.15) + (xy 136.05 150.05) + (xy 135.95 150.05) + (xy 135.95 149.95) + (xy 135.85 149.95) + (xy 135.85 149.85) + (xy 135.75 149.85) + (xy 135.75 149.75) + (xy 135.65 149.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 157.75 149.65) + (xy 157.65 149.65) + (xy 157.65 149.75) + (xy 157.55 149.75) + (xy 157.55 149.85) + (xy 157.45 149.85) + (xy 157.45 149.95) + (xy 157.35 149.95) + (xy 157.35 150.05) + (xy 157.25 150.05) + (xy 157.25 150.15) + (xy 157.15 150.15) + (xy 157.15 150.25) + (xy 157.05 150.25) + (xy 157.05 150.35) + (xy 156.95 150.35) + (xy 156.95 150.45) + (xy 156.75 150.45) + (xy 156.75 150.55) + (xy 156.45 150.55) + (xy 156.45 150.65) + (xy 156.35 150.65) + (xy 156.35 150.75) + (xy 156.25 150.75) + (xy 156.25 151.55) + (xy 156.15 151.55) + (xy 156.15 151.75) + (xy 156.05 151.75) + (xy 156.05 151.85) + (xy 155.25 151.85) + (xy 155.25 151.95) + (xy 155.15 151.95) + (xy 155.15 152.05) + (xy 155.05 152.05) + (xy 155.05 152.15) + (xy 154.95 152.15) + (xy 154.95 152.25) + (xy 154.85 152.25) + (xy 154.85 152.35) + (xy 154.75 152.35) + (xy 154.75 152.45) + (xy 154.65 152.45) + (xy 154.65 153.35) + (xy 154.55 153.35) + (xy 154.55 153.45) + (xy 154.45 153.45) + (xy 154.45 153.55) + (xy 153.95 153.55) + (xy 153.95 153.65) + (xy 153.85 153.65) + (xy 153.85 153.75) + (xy 153.75 153.75) + (xy 153.75 153.95) + (xy 153.85 153.95) + (xy 153.85 154.05) + (xy 153.95 154.05) + (xy 153.95 154.15) + (xy 154.05 154.15) + (xy 154.05 154.25) + (xy 154.15 154.25) + (xy 154.15 154.35) + (xy 154.25 154.35) + (xy 154.25 154.45) + (xy 154.35 154.45) + (xy 154.35 154.55) + (xy 154.45 154.55) + (xy 154.45 154.65) + (xy 154.55 154.65) + (xy 154.55 154.75) + (xy 154.65 154.75) + (xy 154.65 154.85) + (xy 154.75 154.85) + (xy 154.75 154.95) + (xy 156.35 154.95) + (xy 156.35 154.85) + (xy 156.45 154.85) + (xy 156.45 154.75) + (xy 156.65 154.75) + (xy 156.65 154.65) + (xy 158.35 154.65) + (xy 158.35 154.75) + (xy 158.55 154.75) + (xy 158.55 154.95) + (xy 158.65 154.95) + (xy 158.65 156.15) + (xy 158.55 156.15) + (xy 158.55 156.35) + (xy 158.45 156.35) + (xy 158.45 156.45) + (xy 158.55 156.45) + (xy 158.55 156.55) + (xy 158.65 156.55) + (xy 158.65 156.65) + (xy 164.55 156.65) + (xy 164.55 156.55) + (xy 164.65 156.55) + (xy 164.65 156.45) + (xy 164.75 156.45) + (xy 164.75 156.35) + (xy 164.65 156.35) + (xy 164.65 156.25) + (xy 164.55 156.25) + (xy 164.55 156.15) + (xy 164.45 156.15) + (xy 164.45 156.05) + (xy 164.35 156.05) + (xy 164.35 155.95) + (xy 164.25 155.95) + (xy 164.25 155.85) + (xy 164.15 155.85) + (xy 164.15 155.75) + (xy 164.05 155.75) + (xy 164.05 155.65) + (xy 163.95 155.65) + (xy 163.95 155.55) + (xy 163.85 155.55) + (xy 163.85 155.45) + (xy 163.75 155.45) + (xy 163.75 155.35) + (xy 163.65 155.35) + (xy 163.65 155.25) + (xy 163.55 155.25) + (xy 163.55 155.15) + (xy 163.45 155.15) + (xy 163.45 155.05) + (xy 163.35 155.05) + (xy 163.35 154.95) + (xy 163.25 154.95) + (xy 163.25 154.85) + (xy 163.15 154.85) + (xy 163.15 154.75) + (xy 163.05 154.75) + (xy 163.05 154.65) + (xy 162.95 154.65) + (xy 162.95 154.55) + (xy 162.85 154.55) + (xy 162.85 154.45) + (xy 162.75 154.45) + (xy 162.75 154.35) + (xy 162.65 154.35) + (xy 162.65 154.25) + (xy 162.55 154.25) + (xy 162.55 154.15) + (xy 162.45 154.15) + (xy 162.45 154.05) + (xy 162.35 154.05) + (xy 162.35 153.95) + (xy 162.25 153.95) + (xy 162.25 153.85) + (xy 162.15 153.85) + (xy 162.15 153.75) + (xy 162.05 153.75) + (xy 162.05 153.65) + (xy 161.95 153.65) + (xy 161.95 153.55) + (xy 161.85 153.55) + (xy 161.85 153.45) + (xy 161.75 153.45) + (xy 161.75 153.35) + (xy 161.65 153.35) + (xy 161.65 153.25) + (xy 161.55 153.25) + (xy 161.55 153.15) + (xy 161.45 153.15) + (xy 161.45 153.05) + (xy 161.35 153.05) + (xy 161.35 152.95) + (xy 161.25 152.95) + (xy 161.25 152.85) + (xy 161.15 152.85) + (xy 161.15 152.75) + (xy 161.05 152.75) + (xy 161.05 152.65) + (xy 160.95 152.65) + (xy 160.95 152.55) + (xy 160.85 152.55) + (xy 160.85 152.45) + (xy 160.75 152.45) + (xy 160.75 152.35) + (xy 160.65 152.35) + (xy 160.65 152.25) + (xy 160.55 152.25) + (xy 160.55 152.15) + (xy 160.45 152.15) + (xy 160.45 152.05) + (xy 160.35 152.05) + (xy 160.35 151.95) + (xy 160.25 151.95) + (xy 160.25 151.85) + (xy 160.15 151.85) + (xy 160.15 151.75) + (xy 160.05 151.75) + (xy 160.05 151.65) + (xy 159.95 151.65) + (xy 159.95 151.55) + (xy 159.85 151.55) + (xy 159.85 151.45) + (xy 159.75 151.45) + (xy 159.75 151.35) + (xy 159.65 151.35) + (xy 159.65 151.25) + (xy 159.55 151.25) + (xy 159.55 151.15) + (xy 159.45 151.15) + (xy 159.45 151.05) + (xy 159.35 151.05) + (xy 159.35 150.95) + (xy 159.25 150.95) + (xy 159.25 150.85) + (xy 159.15 150.85) + (xy 159.15 150.75) + (xy 159.05 150.75) + (xy 159.05 150.65) + (xy 158.95 150.65) + (xy 158.95 150.55) + (xy 158.85 150.55) + (xy 158.85 150.45) + (xy 158.75 150.45) + (xy 158.75 150.35) + (xy 158.65 150.35) + (xy 158.65 150.25) + (xy 158.55 150.25) + (xy 158.55 150.15) + (xy 158.45 150.15) + (xy 158.45 150.05) + (xy 158.05 150.05) + (xy 158.05 149.95) + (xy 157.95 149.95) + (xy 157.95 149.85) + (xy 157.85 149.85) + (xy 157.85 149.75) + (xy 157.75 149.75) + ) + ) + (filled_polygon + (layer "F.Cu") + (pts + (xy 122.45 153.45) + (xy 122.45 153.55) + (xy 122.35 153.55) + (xy 122.35 153.65) + (xy 122.25 153.65) + (xy 122.25 153.75) + (xy 122.15 153.75) + (xy 122.15 153.85) + (xy 122.05 153.85) + (xy 122.05 153.95) + (xy 121.95 153.95) + (xy 121.95 154.05) + (xy 121.85 154.05) + (xy 121.85 154.15) + (xy 121.75 154.15) + (xy 121.75 154.25) + (xy 121.65 154.25) + (xy 121.65 154.35) + (xy 121.55 154.35) + (xy 121.55 154.45) + (xy 121.45 154.45) + (xy 121.45 154.55) + (xy 121.35 154.55) + (xy 121.35 154.65) + (xy 121.25 154.65) + (xy 121.25 154.75) + (xy 121.15 154.75) + (xy 121.15 155.95) + (xy 121.05 155.95) + (xy 121.05 156.15) + (xy 120.85 156.15) + (xy 120.85 156.25) + (xy 120.75 156.25) + (xy 120.75 156.35) + (xy 120.65 156.35) + (xy 120.65 156.45) + (xy 120.75 156.45) + (xy 120.75 156.55) + (xy 120.85 156.55) + (xy 120.85 156.65) + (xy 125.25 156.65) + (xy 125.25 156.55) + (xy 125.35 156.55) + (xy 125.35 156.45) + (xy 125.45 156.45) + (xy 125.45 156.35) + (xy 125.35 156.35) + (xy 125.35 156.25) + (xy 125.25 156.25) + (xy 125.25 156.15) + (xy 125.05 156.15) + (xy 125.05 155.95) + (xy 124.95 155.95) + (xy 124.95 154.05) + (xy 125.05 154.05) + (xy 125.05 153.85) + (xy 125.15 153.85) + (xy 125.15 153.75) + (xy 125.25 153.75) + (xy 125.25 153.65) + (xy 125.15 153.65) + (xy 125.15 153.55) + (xy 125.05 153.55) + (xy 125.05 153.45) + ) + ) + ) +) diff --git a/pcb/kicad/sandtable-controller.kicad_pro b/pcb/kicad/sandtable-controller.kicad_pro new file mode 100644 index 0000000..77caebd --- /dev/null +++ b/pcb/kicad/sandtable-controller.kicad_pro @@ -0,0 +1,726 @@ +{ + "board": { + "3dviewports": [], + "design_settings": { + "defaults": { + "apply_defaults_to_fp_fields": false, + "apply_defaults_to_fp_shapes": false, + "apply_defaults_to_fp_text": false, + "board_outline_line_width": 0.05, + "copper_line_width": 0.2, + "copper_text_italic": false, + "copper_text_size_h": 1.5, + "copper_text_size_v": 1.5, + "copper_text_thickness": 0.3, + "copper_text_upright": false, + "courtyard_line_width": 0.05, + "dimension_precision": 4, + "dimension_units": 3, + "dimensions": { + "arrow_length": 1270000, + "extension_offset": 500000, + "keep_text_aligned": true, + "suppress_zeroes": false, + "text_position": 0, + "units_format": 1 + }, + "fab_line_width": 0.1, + "fab_text_italic": false, + "fab_text_size_h": 1.0, + "fab_text_size_v": 1.0, + "fab_text_thickness": 0.15, + "fab_text_upright": false, + "other_line_width": 0.1, + "other_text_italic": false, + "other_text_size_h": 1.0, + "other_text_size_v": 1.0, + "other_text_thickness": 0.15, + "other_text_upright": false, + "pads": { + "drill": 0.0, + "height": 8.0, + "width": 2.54 + }, + "silk_line_width": 0.12, + "silk_text_italic": false, + "silk_text_size_h": 1.0, + "silk_text_size_v": 1.0, + "silk_text_thickness": 0.15, + "silk_text_upright": false, + "zones": { + "min_clearance": 0.508 + } + }, + "diff_pair_dimensions": [], + "drc_exclusions": [], + "meta": { + "filename": "board_design_settings.json", + "version": 2 + }, + "rule_severities": { + "annular_width": "error", + "clearance": "error", + "connection_width": "warning", + "copper_edge_clearance": "error", + "copper_sliver": "warning", + "courtyards_overlap": "error", + "creepage": "error", + "diff_pair_gap_out_of_range": "error", + "diff_pair_uncoupled_length_too_long": "error", + "drill_out_of_range": "error", + "duplicate_footprints": "warning", + "extra_footprint": "warning", + "footprint": "error", + "footprint_filters_mismatch": "ignore", + "footprint_symbol_mismatch": "warning", + "footprint_type_mismatch": "ignore", + "hole_clearance": "error", + "hole_near_hole": "error", + "hole_to_hole": "error", + "holes_co_located": "warning", + "invalid_outline": "error", + "isolated_copper": "warning", + "item_on_disabled_layer": "error", + "items_not_allowed": "error", + "length_out_of_range": "error", + "lib_footprint_issues": "ignore", + "lib_footprint_mismatch": "ignore", + "malformed_courtyard": "error", + "microvia_drill_out_of_range": "error", + "mirrored_text_on_front_layer": "warning", + "missing_courtyard": "ignore", + "missing_footprint": "warning", + "net_conflict": "warning", + "nonmirrored_text_on_back_layer": "warning", + "npth_inside_courtyard": "ignore", + "padstack": "warning", + "pth_inside_courtyard": "ignore", + "shorting_items": "error", + "silk_edge_clearance": "ignore", + "silk_over_copper": "ignore", + "silk_overlap": "ignore", + "skew_out_of_range": "error", + "solder_mask_bridge": "error", + "starved_thermal": "error", + "text_height": "ignore", + "text_thickness": "warning", + "through_hole_pad_without_hole": "error", + "too_many_vias": "error", + "track_angle": "error", + "track_dangling": "warning", + "track_segment_length": "error", + "track_width": "error", + "tracks_crossing": "error", + "unconnected_items": "error", + "unresolved_variable": "error", + "via_dangling": "warning", + "zones_intersect": "error" + }, + "rules": { + "max_error": 0.005, + "min_clearance": 0.16, + "min_connection": 0.0, + "min_copper_edge_clearance": 0.3, + "min_groove_width": 0.0, + "min_hole_clearance": 0.2, + "min_hole_to_hole": 0.25, + "min_microvia_diameter": 0.2, + "min_microvia_drill": 0.1, + "min_resolved_spokes": 2, + "min_silk_clearance": 0.0, + "min_text_height": 0.8, + "min_text_thickness": 0.08, + "min_through_hole_diameter": 0.3, + "min_track_width": 0.16, + "min_via_annular_width": 0.15, + "min_via_diameter": 0.6, + "solder_mask_to_copper_clearance": 0.0, + "use_height_for_length_calcs": true + }, + "teardrop_options": [ + { + "td_onpthpad": true, + "td_onroundshapesonly": false, + "td_onsmdpad": true, + "td_ontrackend": false, + "td_onvia": true + } + ], + "teardrop_parameters": [ + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_round_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_rect_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_track_end", + "td_width_to_size_filter_ratio": 0.9 + } + ], + "track_widths": [], + "tuning_pattern_settings": { + "diff_pair_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 1.0 + }, + "diff_pair_skew_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + }, + "single_track_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + } + }, + "via_dimensions": [], + "zones_allow_external_fillets": false + }, + "ipc2581": { + "dist": "", + "distpn": "", + "internal_id": "", + "mfg": "", + "mpn": "" + }, + "layer_pairs": [], + "layer_presets": [], + "viewports": [] + }, + "cvpcb": { + "equivalence_files": [] + }, + "erc": { + "erc_exclusions": [], + "meta": { + "version": 0 + }, + "pin_map": [ + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 1, + 0, + 1, + 2 + ], + [ + 0, + 1, + 0, + 0, + 0, + 0, + 1, + 1, + 2, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 2 + ], + [ + 1, + 1, + 1, + 1, + 1, + 0, + 1, + 1, + 1, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 1, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 2, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2 + ] + ], + "rule_severities": { + "bus_definition_conflict": "error", + "bus_entry_needed": "error", + "bus_to_bus_conflict": "error", + "bus_to_net_conflict": "error", + "conflicting_netclasses": "error", + "different_unit_footprint": "error", + "different_unit_net": "error", + "duplicate_reference": "error", + "duplicate_sheet_names": "error", + "endpoint_off_grid": "warning", + "extra_units": "error", + "footprint_filter": "ignore", + "footprint_link_issues": "warning", + "four_way_junction": "ignore", + "global_label_dangling": "warning", + "hier_label_mismatch": "error", + "label_dangling": "error", + "label_multiple_wires": "warning", + "lib_symbol_issues": "warning", + "lib_symbol_mismatch": "warning", + "missing_bidi_pin": "warning", + "missing_input_pin": "warning", + "missing_power_pin": "error", + "missing_unit": "warning", + "multiple_net_names": "warning", + "net_not_bus_member": "warning", + "no_connect_connected": "warning", + "no_connect_dangling": "warning", + "pin_not_connected": "error", + "pin_not_driven": "error", + "pin_to_pin": "warning", + "power_pin_not_driven": "error", + "same_local_global_label": "warning", + "similar_label_and_power": "warning", + "similar_labels": "warning", + "similar_power": "warning", + "simulation_model_issue": "ignore", + "single_global_label": "ignore", + "unannotated": "error", + "unconnected_wire_endpoint": "warning", + "unit_value_mismatch": "error", + "unresolved_variable": "error", + "wire_dangling": "error" + } + }, + "libraries": { + "pinned_footprint_libs": [], + "pinned_symbol_libs": [] + }, + "meta": { + "filename": "sandtable-controller.kicad_pro", + "version": 3 + }, + "net_settings": { + "classes": [ + { + "bus_width": 12, + "clearance": 0.16, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Default", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 2147483647, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.2, + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + }, + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Power", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 0, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.8, + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + }, + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Motor", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 0, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.5, + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + }, + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Rail", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 0, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.5, + "via_diameter": 0.6, + "via_drill": 0.3, + "wire_width": 6 + } + ], + "meta": { + "version": 4 + }, + "net_colors": null, + "netclass_assignments": null, + "netclass_patterns": [ + { + "netclass": "Power", + "pattern": "/GND" + }, + { + "netclass": "Power", + "pattern": "/VIN_RAW" + }, + { + "netclass": "Power", + "pattern": "/VIN_FUSED" + }, + { + "netclass": "Power", + "pattern": "/+12V" + }, + { + "netclass": "Motor", + "pattern": "/X_1A" + }, + { + "netclass": "Motor", + "pattern": "/X_1B" + }, + { + "netclass": "Motor", + "pattern": "/X_2A" + }, + { + "netclass": "Motor", + "pattern": "/X_2B" + }, + { + "netclass": "Motor", + "pattern": "/Y_1A" + }, + { + "netclass": "Motor", + "pattern": "/Y_1B" + }, + { + "netclass": "Motor", + "pattern": "/Y_2A" + }, + { + "netclass": "Motor", + "pattern": "/Y_2B" + }, + { + "netclass": "Rail", + "pattern": "/+5V" + }, + { + "netclass": "Rail", + "pattern": "/+5V_REG" + }, + { + "netclass": "Rail", + "pattern": "/VBUS" + }, + { + "netclass": "Rail", + "pattern": "/+3V3" + } + ] + }, + "pcbnew": { + "last_paths": { + "gencad": "", + "idf": "", + "netlist": "", + "plot": "", + "pos_files": "", + "specctra_dsn": "", + "step": "", + "svg": "", + "vrml": "" + }, + "page_layout_descr_file": "" + }, + "schematic": { + "annotate_start_num": 0, + "bom_export_filename": "${PROJECTNAME}.csv", + "bom_fmt_presets": [], + "bom_fmt_settings": { + "field_delimiter": ",", + "keep_line_breaks": false, + "keep_tabs": false, + "name": "CSV", + "ref_delimiter": ",", + "ref_range_delimiter": "", + "string_delimiter": "\"" + }, + "bom_presets": [], + "bom_settings": { + "exclude_dnp": false, + "fields_ordered": [ + { + "group_by": false, + "label": "Reference", + "name": "Reference", + "show": true + }, + { + "group_by": true, + "label": "Value", + "name": "Value", + "show": true + }, + { + "group_by": false, + "label": "Datasheet", + "name": "Datasheet", + "show": true + }, + { + "group_by": false, + "label": "Footprint", + "name": "Footprint", + "show": true + }, + { + "group_by": false, + "label": "Qty", + "name": "${QUANTITY}", + "show": true + }, + { + "group_by": true, + "label": "DNP", + "name": "${DNP}", + "show": true + } + ], + "filter_string": "", + "group_symbols": true, + "include_excluded_from_bom": false, + "name": "Grouped By Value", + "sort_asc": true, + "sort_field": "Reference" + }, + "connection_grid_size": 50.0, + "drawing": { + "dashed_lines_dash_length_ratio": 12.0, + "dashed_lines_gap_length_ratio": 3.0, + "default_line_thickness": 6.0, + "default_text_size": 50.0, + "field_names": [], + "intersheets_ref_own_page": false, + "intersheets_ref_prefix": "", + "intersheets_ref_short": false, + "intersheets_ref_show": false, + "intersheets_ref_suffix": "", + "junction_size_choice": 3, + "label_size_ratio": 0.25, + "operating_point_overlay_i_precision": 3, + "operating_point_overlay_i_range": "~A", + "operating_point_overlay_v_precision": 3, + "operating_point_overlay_v_range": "~V", + "overbar_offset_ratio": 1.23, + "pin_symbol_size": 0.0, + "text_offset_ratio": 0.08 + }, + "legacy_lib_dir": "", + "legacy_lib_list": [], + "meta": { + "version": 1 + }, + "net_format_name": "", + "page_layout_descr_file": "", + "plot_directory": "", + "space_save_all_events": true, + "spice_current_sheet_as_root": false, + "spice_external_command": "spice \"%I\"", + "spice_model_current_sheet_as_root": true, + "spice_save_all_currents": false, + "spice_save_all_dissipations": false, + "spice_save_all_voltages": false, + "subpart_first_id": 65, + "subpart_id_separator": 0 + }, + "sheets": [ + [ + "d585c3d2-c803-5c74-8a05-da481956c6b2", + "Root" + ] + ], + "text_variables": {} +} \ No newline at end of file diff --git a/pcb/kicad/sandtable-controller.kicad_sch b/pcb/kicad/sandtable-controller.kicad_sch new file mode 100644 index 0000000..ad929b2 --- /dev/null +++ b/pcb/kicad/sandtable-controller.kicad_sch @@ -0,0 +1,14989 @@ +(kicad_sch + (version 20250114) + (generator "eeschema") + (generator_version "9.0") + (uuid "d585c3d2-c803-5c74-8a05-da481956c6b2") + (paper "A2") + (title_block + (title "SandTable Controller") + (date "2026-10-22") + (rev "0.4") + (company "lazypugs") + (comment 1 "ESP32-WROOM-32E (FluidNC) + 2x DRV8825 StepStick, 12V in") + (comment 2 "Drop-in for the Arduino+CNC shield bay in the sand table (Uno hole pattern)") + ) + (lib_symbols + (symbol "RF_Module:ESP32-WROOM-32E" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -12.7 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "ESP32-WROOM-32E" + (at 1.27 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "RF_Module:ESP32-WROOM-32D" + (at 16.51 -34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "RF Radio BT ESP ESP32 Espressif onboard PCB antenna" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "ESP32?WROOM?32D*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "ESP32-WROOM-32E_0_1" + (rectangle + (start -12.7 33.02) + (end 12.7 -33.02) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "ESP32-WROOM-32E_1_1" + (pin input line + (at -15.24 30.48 0) + (length 2.54) + (name "EN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -15.24 25.4 0) + (length 2.54) + (name "SENSOR_VP" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -15.24 22.86 0) + (length 2.54) + (name "SENSOR_VN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 0 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "21" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -2.54 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "22" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -5.08 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "17" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -7.62 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "18" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -10.16 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "20" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -12.7 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "19" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -12.7 -27.94 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "32" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 35.56 270) + (length 2.54) + (name "VDD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -35.56 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -35.56 90) + (length 2.54) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -35.56 90) + (length 2.54) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "38" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -35.56 90) + (length 2.54) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "39" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 30.48 180) + (length 2.54) + (name "IO0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "25" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 27.94 180) + (length 2.54) + (name "TXD0/IO1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "35" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 25.4 180) + (length 2.54) + (name "IO2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "24" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 22.86 180) + (length 2.54) + (name "RXD0/IO3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "34" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 20.32 180) + (length 2.54) + (name "IO4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "26" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 17.78 180) + (length 2.54) + (name "IO5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "29" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 15.24 180) + (length 2.54) + (name "IO12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 12.7 180) + (length 2.54) + (name "IO13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 10.16 180) + (length 2.54) + (name "IO14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 7.62 180) + (length 2.54) + (name "IO15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "23" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 5.08 180) + (length 2.54) + (name "IO16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "27" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 2.54 180) + (length 2.54) + (name "IO17" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "28" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 0 180) + (length 2.54) + (name "IO18" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "30" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -2.54 180) + (length 2.54) + (name "IO19" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "31" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -5.08 180) + (length 2.54) + (name "IO21" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "33" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -7.62 180) + (length 2.54) + (name "IO22" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "36" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -10.16 180) + (length 2.54) + (name "IO23" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "37" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -12.7 180) + (length 2.54) + (name "IO25" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -15.24 180) + (length 2.54) + (name "IO26" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -17.78 180) + (length 2.54) + (name "IO27" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -20.32 180) + (length 2.54) + (name "IO32" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -22.86 180) + (length 2.54) + (name "IO33" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 15.24 -25.4 180) + (length 2.54) + (name "IO34" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 15.24 -27.94 180) + (length 2.54) + (name "IO35" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "SandTable:CH340C_3V3" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -5.08 13.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "CH340C" + (at 1.27 13.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" + (at -18.542 30.226 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://datasheet.lcsc.com/szlcsc/Jiangsu-Qin-Heng-CH340C_C84681.pdf" + (at -6.604 33.274 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB serial converter, crystal-less, UART, SOIC-16" + (at -1.524 36.068 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "USB UART Serial Converter Interface" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOIC*3.9x9.9mm*P1.27mm*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "CH340C_3V3_0_1" + (rectangle + (start -7.62 12.7) + (end 7.62 -12.7) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "CH340C_3V3_1_1" + (pin input line + (at -10.16 7.62 0) + (length 2.54) + (name "R232" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 2.54 0) + (length 2.54) + (name "UD+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 0 0) + (length 2.54) + (name "UD-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -7.62 -5.08 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -7.62 -7.62 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -2.54 15.24 270) + (length 2.54) + (name "VCC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 15.24 270) + (length 2.54) + (name "V3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -15.24 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 10.16 180) + (length 2.54) + (name "TXD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 7.62 180) + (length 2.54) + (name "RXD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 2.54 180) + (length 2.54) + (name "~{CTS}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 0 180) + (length 2.54) + (name "~{DSR}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 -2.54 180) + (length 2.54) + (name "~{RI}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 -5.08 180) + (length 2.54) + (name "~{DCD}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 -7.62 180) + (length 2.54) + (name "~{DTR}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 -10.16 180) + (length 2.54) + (name "~{RTS}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Regulator_Linear:AP7361C-33E" + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -3.81 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "AP7361C-33E" + (at 0 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-223-3_TabPin2" + (at 0 5.715 0) + (effects + (font + (size 1.27 1.27) + (italic yes) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.diodes.com/assets/Datasheets/AP7361C.pdf" + (at 0 -1.27 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "linear regulator ldo fixed positive" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOT?223*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "AP7361C-33E_0_1" + (rectangle + (start -5.08 -5.08) + (end 5.08 1.905) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "AP7361C-33E_1_1" + (pin power_in line + (at -7.62 0 0) + (length 2.54) + (name "VI" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -7.62 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_out line + (at 7.62 0 180) + (length 2.54) + (name "VO" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "74xGxx:74AHCT1G125" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -2.54 3.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "74AHCT1G125" + (at 0 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "http://www.ti.com/lit/sg/scyt129e/scyt129e.pdf" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Single Buffer Gate Tri-State, Low-Voltage CMOS" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "Single Gate Buff Tri-State LVC CMOS" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOT* SG-*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "74AHCT1G125_0_1" + (polyline + (pts + (xy -7.62 6.35) + (xy -7.62 -6.35) + (xy 5.08 0) + (xy -7.62 6.35) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "74AHCT1G125_1_1" + (pin input line + (at -15.24 0 0) + (length 7.62) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -5.08 10.16 270) + (length 5.08) + (name "VCC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -5.08 -10.16 90) + (length 5.08) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input inverted + (at 0 10.16 270) + (length 7.62) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin tri_state line + (at 12.7 0 180) + (length 7.62) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Converter_DCDC:R-78E5.0-1.0" + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -3.81 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "R-78E5.0-1.0" + (at 0 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT" + (at 1.27 -6.35 0) + (effects + (font + (size 1.27 1.27) + (italic yes) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.recom-power.com/pdf/Innoline/R-78Exx-1.0.pdf" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "1A Step-Down DC/DC-Regulator, 7-28V input, 5V fixed Output Voltage, LM78xx replacement, -40°C to +85°C, SIP3" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "dc-dc recom Step-Down DC/DC-Regulator" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Converter*DCDC*RECOM*R*78E*0.5*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "R-78E5.0-1.0_0_1" + (rectangle + (start -5.08 1.905) + (end 5.08 -5.08) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "R-78E5.0-1.0_1_1" + (pin power_in line + (at -7.62 0 0) + (length 2.54) + (name "IN" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -7.62 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_out line + (at 7.62 0 180) + (length 2.54) + (name "OUT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "SandTable:DRV8825_StepStick" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "A" + (at -2.54 19.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Pololu_Breakout_A4988" + (at -2.54 16.51 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Footprint" "Module:Pololu_Breakout-16_15.2x20.3mm" + (at 6.985 -19.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.pololu.com/product/2980/pictures" + (at 2.54 -7.62 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Pololu Breakout Board, Stepper Driver A4988" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "Pololu Breakout Board Stepper Driver A4988" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Pololu*Breakout*15.2x20.3mm*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "DRV8825_StepStick_0_1" + (rectangle + (start 10.16 -17.78) + (end -7.62 15.24) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "DRV8825_StepStick_1_1" + (pin input line + (at -10.16 10.16 0) + (length 2.54) + (name "~{RST}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 7.62 0) + (length 2.54) + (name "~{SLP}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 2.54 0) + (length 2.54) + (name "~{EN}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 0 0) + (length 2.54) + (name "STEP" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -2.54 0) + (length 2.54) + (name "DIR" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -7.62 0) + (length 2.54) + (name "M0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -10.16 0) + (length 2.54) + (name "M1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -12.7 0) + (length 2.54) + (name "M2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 17.78 270) + (length 2.54) + (name "VDD/~{FAULT}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -20.32 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 5.08 17.78 270) + (length 2.54) + (name "VMOT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 5.08 -20.32 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 2.54 180) + (length 2.54) + (name "A2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 0 180) + (length 2.54) + (name "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 -2.54 180) + (length 2.54) + (name "B1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 -5.08 180) + (length 2.54) + (name "B2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector:Barrel_Jack" + (pin_names + (offset 1.016) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 5.334 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Barrel_Jack" + (at 0 -5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 1.27 -1.016 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 1.27 -1.016 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "DC Barrel Jack" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "DC power barrel jack connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "BarrelJack*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Barrel_Jack_0_1" + (rectangle + (start -5.08 3.81) + (end 5.08 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (polyline + (pts + (xy -3.81 -2.54) + (xy -2.54 -2.54) + (xy -1.27 -1.27) + (xy 0 -2.54) + (xy 2.54 -2.54) + (xy 5.08 -2.54) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -3.302 1.905) + (mid -3.9343 2.54) + (end -3.302 3.175) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -3.302 1.905) + (mid -3.9343 2.54) + (end -3.302 3.175) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (rectangle + (start 3.683 3.175) + (end -3.302 1.905) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 5.08 2.54) + (xy 3.81 2.54) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Barrel_Jack_1_1" + (pin passive line + (at 7.62 2.54 180) + (length 2.54) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 7.62 -2.54 180) + (length 2.54) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector:USB_C_Receptacle_USB2.0_16P" + (pin_names + (offset 1.016) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 22.225 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "USB_C_Receptacle_USB2.0_16P" + (at 0 19.685 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 3.81 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.usb.org/sites/default/files/documents/usb_type-c.zip" + (at 3.81 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB 2.0-only 16P Type-C Receptacle connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "usb universal serial bus type-C USB2.0" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "USB*C*Receptacle*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_16P_0_0" + (rectangle + (start -0.254 -17.78) + (end 0.254 -16.764) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 15.494) + (end 9.144 14.986) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 10.414) + (end 9.144 9.906) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 7.874) + (end 9.144 7.366) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 2.794) + (end 9.144 2.286) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 0.254) + (end 9.144 -0.254) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -2.286) + (end 9.144 -2.794) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -4.826) + (end 9.144 -5.334) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -12.446) + (end 9.144 -12.954) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 10.16 -14.986) + (end 9.144 -15.494) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_16P_0_1" + (rectangle + (start -10.16 17.78) + (end 10.16 -17.78) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (polyline + (pts + (xy -8.89 -3.81) + (xy -8.89 3.81) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -7.62 -3.81) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start -7.62 3.81) + (mid -6.985 4.4423) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -7.62 3.81) + (mid -6.985 4.4423) + (end -6.35 3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start -8.89 3.81) + (mid -6.985 5.7067) + (end -5.08 3.81) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -5.08 -3.81) + (mid -6.985 -5.7067) + (end -8.89 -3.81) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -6.35 -3.81) + (mid -6.985 -4.4423) + (end -7.62 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -6.35 -3.81) + (mid -6.985 -4.4423) + (end -7.62 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy -5.08 3.81) + (xy -5.08 -3.81) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center -2.54 1.143) + (radius 0.635) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy -1.27 4.318) + (xy 0 6.858) + (xy 1.27 4.318) + (xy -1.27 4.318) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 0 -2.032) + (xy 2.54 0.508) + (xy 2.54 1.778) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 -3.302) + (xy -2.54 -0.762) + (xy -2.54 0.508) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 -5.842) + (xy 0 4.318) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 0 -5.842) + (radius 1.27) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (rectangle + (start 1.905 1.778) + (end 3.175 3.048) + (stroke + (width 0.254) + (type default) + ) + (fill + (type outline) + ) + ) + ) + (symbol "USB_C_Receptacle_USB2.0_16P_1_1" + (pin passive line + (at -7.62 -22.86 90) + (length 5.08) + (name "SHIELD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "S1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -22.86 90) + (length 5.08) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 15.24 15.24 180) + (length 5.08) + (hide yes) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 10.16 180) + (length 5.08) + (name "CC1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 7.62 180) + (length 5.08) + (name "CC2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 2.54 180) + (length 5.08) + (name "D-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 0 180) + (length 5.08) + (name "D-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -2.54 180) + (length 5.08) + (name "D+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -5.08 180) + (length 5.08) + (name "D+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -12.7 180) + (length 5.08) + (name "SBU1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "A8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at 15.24 -15.24 180) + (length 5.08) + (name "SBU2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "B8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x04" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x04" + (at 0 -7.62 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Conn_01x04_1_1" + (rectangle + (start -1.27 3.81) + (end 1.27 -6.35) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -4.953) + (end 0 -5.207) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -5.08 0) + (length 3.81) + (name "Pin_4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x03" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x03" + (at 0 -5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Conn_01x03_1_1" + (rectangle + (start -1.27 3.81) + (end 1.27 -3.81) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 2.667) + (end 0 2.413) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -1.27 -2.413) + (end 0 -2.667) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 2.54 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 3.81) + (name "Pin_3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:D_Schottky" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "D" + (at 0 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "D_Schottky" + (at 0 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Schottky diode" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "diode Schottky" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "D_Schottky_0_1" + (polyline + (pts + (xy -1.905 0.635) + (xy -1.905 1.27) + (xy -1.27 1.27) + (xy -1.27 -1.27) + (xy -0.635 -1.27) + (xy -0.635 -0.635) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 1.27) + (xy 1.27 -1.27) + (xy -1.27 0) + (xy 1.27 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 0) + (xy -1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "D_Schottky_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:LED" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "D" + (at 0 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED" + (at 0 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Light emitting diode" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "LED diode" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "LED* LED_SMD:* LED_THT:*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "LED_0_1" + (polyline + (pts + (xy -3.048 -0.762) + (xy -4.572 -2.286) + (xy -3.81 -2.286) + (xy -4.572 -2.286) + (xy -4.572 -1.524) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.778 -0.762) + (xy -3.302 -2.286) + (xy -2.54 -2.286) + (xy -3.302 -2.286) + (xy -3.302 -1.524) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 0) + (xy 1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 -1.27) + (xy -1.27 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.27) + (xy 1.27 1.27) + (xy -1.27 0) + (xy 1.27 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "LED_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Transistor_BJT:MMBT3904" + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "Q" + (at 5.08 1.905 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "MMBT3904" + (at 5.08 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 5.08 -1.905 0) + (effects + (font + (size 1.27 1.27) + (italic yes) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.onsemi.com/pdf/datasheet/pzt3904-d.pdf" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Description" "0.2A Ic, 40V Vce, Small Signal NPN Transistor, SOT-23" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Device" "NPN" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Pins" "1=B 2=E 3=C" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "NPN Transistor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOT?23*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "MMBT3904_0_1" + (polyline + (pts + (xy -2.54 0) + (xy 0.635 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.635 1.905) + (xy 0.635 -1.905) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 1.27 0) + (radius 2.8194) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "MMBT3904_1_1" + (polyline + (pts + (xy 0.635 0.635) + (xy 2.54 2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.635 -0.635) + (xy 2.54 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.778) + (xy 1.778 -1.27) + (xy 2.286 -2.286) + (xy 1.27 -1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (pin input line + (at -5.08 0 0) + (length 2.54) + (name "B" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 5.08 270) + (length 2.54) + (name "C" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 2.54 -5.08 90) + (length 2.54) + (name "E" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Switch:SW_Push" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "SW" + (at 1.27 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "SW_Push" + (at 0 -1.524 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Push button switch, generic, two pins" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "switch normally-open pushbutton push-button" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "SW_Push_0_1" + (circle + (center -2.032 0) + (radius 0.508) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 1.27) + (xy 0 3.048) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 2.032 0) + (radius 0.508) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.54 1.27) + (xy -2.54 1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 2.54) + (name "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 0 180) + (length 2.54) + (name "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:C_Polarized" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "C" + (at 0.635 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "C_Polarized" + (at 0.635 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0.9652 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "cap capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "CP_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "C_Polarized_0_1" + (rectangle + (start -2.286 0.508) + (end 2.286 1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.778 2.286) + (xy -0.762 2.286) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 2.794) + (xy -1.27 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 2.286 -0.508) + (end -2.286 -1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + ) + (symbol "C_Polarized_1_1" + (pin passive line + (at 0 3.81 270) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:C" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "C" + (at 0.635 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "C" + (at 0.635 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0.9652 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "cap capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "C_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "C_0_1" + (polyline + (pts + (xy -2.032 0.762) + (xy 2.032 0.762) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -2.032 -0.762) + (xy 2.032 -0.762) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "C_1_1" + (pin passive line + (at 0 3.81 270) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:R" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "R" + (at 2.032 0 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "R" + (at 0 0 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at -1.778 0 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "R res resistor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "R_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "R_0_1" + (rectangle + (start -1.016 -2.54) + (end 1.016 2.54) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "R_1_1" + (pin passive line + (at 0 3.81 270) + (length 1.27) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 1.27) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:Polyfuse" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "F" + (at -2.54 0 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Polyfuse" + (at 2.54 0 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 1.27 -5.08 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Resettable fuse, polymeric positive temperature coefficient" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "resettable fuse PTC PPTC polyfuse polyswitch" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "*polyfuse* *PTC*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Polyfuse_0_1" + (polyline + (pts + (xy -1.524 2.54) + (xy -1.524 1.524) + (xy 1.524 -1.524) + (xy 1.524 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start -0.762 2.54) + (end 0.762 -2.54) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 2.54) + (xy 0 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Polyfuse_1_1" + (pin passive line + (at 0 3.81 270) + (length 1.27) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 1.27) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Power_Protection:USBLC6-2SC6" + (pin_names + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at 0.635 5.715 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "USBLC6-2SC6" + (at 0.635 3.81 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23-6" + (at 1.27 -6.35 0) + (effects + (font + (size 1.27 1.27) + (italic yes) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.st.com/resource/en/datasheet/usblc6-2.pdf" + (at 1.27 -8.255 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Description" "Very low capacitance ESD protection diode, 2 data-line, SOT-23-6" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "usb ethernet video" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOT?23*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "USBLC6-2SC6_0_0" + (circle + (center -1.524 0) + (radius 0.0001) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center -0.508 2.032) + (radius 0.0001) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center -0.508 -4.572) + (radius 0.0001) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 0.508 2.032) + (radius 0.0001) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 0.508 -4.572) + (radius 0.0001) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (circle + (center 1.524 -2.54) + (radius 0.0001) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "USBLC6-2SC6_0_1" + (polyline + (pts + (xy -2.54 0) + (xy 2.54 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -2.54 -2.54) + (xy 2.54 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -2.032 0.508) + (xy -1.016 0.508) + (xy -1.524 1.524) + (xy -2.032 0.508) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -2.032 -3.048) + (xy -1.016 -3.048) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.016 1.524) + (xy -2.032 1.524) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.016 -4.064) + (xy -2.032 -4.064) + (xy -1.524 -3.048) + (xy -1.016 -4.064) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -0.508 -1.143) + (xy -0.508 -0.762) + (xy 0.508 -0.762) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 2.54) + (xy -0.508 2.032) + (xy 0.508 2.032) + (xy 0 1.524) + (xy 0 -4.064) + (xy -0.508 -4.572) + (xy 0.508 -4.572) + (xy 0 -5.08) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.508 -1.778) + (xy -0.508 -1.778) + (xy 0 -0.762) + (xy 0.508 -1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.016 1.524) + (xy 2.032 1.524) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.016 -3.048) + (xy 2.032 -3.048) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.032 0.508) + (xy 1.016 0.508) + (xy 1.524 1.524) + (xy 2.032 0.508) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 2.032 -4.064) + (xy 1.016 -4.064) + (xy 1.524 -3.048) + (xy 2.032 -4.064) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "USBLC6-2SC6_1_1" + (rectangle + (start -2.54 2.794) + (end 2.54 -5.334) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (polyline + (pts + (xy -0.508 2.032) + (xy -1.524 2.032) + (xy -1.524 -4.572) + (xy -0.508 -4.572) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0.508 -4.572) + (xy 1.524 -4.572) + (xy 1.524 2.032) + (xy 0.508 2.032) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 2.54) + (name "I/O1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at -5.08 -2.54 0) + (length 2.54) + (name "I/O2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 5.08 270) + (length 2.54) + (name "VBUS" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -7.62 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 0 180) + (length 2.54) + (name "I/O1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 5.08 -2.54 180) + (length 2.54) + (name "I/O2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Jumper:SolderJumper_2_Open" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (property "Reference" "JP" + (at 0 2.032 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SolderJumper_2_Open" + (at 0 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Solder Jumper, 2-pole, open" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "solder jumper SPST" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SolderJumper*Open*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "SolderJumper_2_Open_0_1" + (polyline + (pts + (xy -0.254 1.016) + (xy -0.254 -1.016) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -0.254 -1.016) + (mid -1.2656 0) + (end -0.254 1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start -0.254 -1.016) + (mid -1.2656 0) + (end -0.254 1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (arc + (start 0.254 1.016) + (mid 1.2656 0) + (end 0.254 -1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (arc + (start 0.254 1.016) + (mid 1.2656 0) + (end 0.254 -1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 0.254 1.016) + (xy 0.254 -1.016) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "SolderJumper_2_Open_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "B" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Mechanical:MountingHole" + (pin_names + (offset 1.016) + ) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (property "Reference" "H" + (at 0 5.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MountingHole" + (at 0 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Mounting Hole without connection" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "mounting hole" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "MountingHole*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "MountingHole_0_1" + (circle + (center 0 0) + (radius 1.27) + (stroke + (width 1.27) + (type default) + ) + (fill + (type none) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "power:PWR_FLAG" + (power) + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "#FLG" + (at 0 1.905 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 0 3.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Special symbol for telling ERC where power comes from" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "flag power" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "PWR_FLAG_0_0" + (pin power_out line + (at 0 0 90) + (length 0) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (symbol "PWR_FLAG_0_1" + (polyline + (pts + (xy 0 0) + (xy 0 1.27) + (xy -1.016 1.905) + (xy 0 2.54) + (xy 1.016 1.905) + (xy 0 1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (embedded_fonts no) + ) + ) + (text "POWER INPUT 12V -> 5V" + (exclude_from_sim no) + (at 12.7 21.59 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "c4c8192a-8f93-54ea-a08a-8f64f9245c2f") + ) + (rectangle + (start 10.16 22.86) + (end 287.02 104.14) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "ba7a523e-cdb4-5f91-9df4-5f1f876153e3") + ) + (text "3.3V" + (exclude_from_sim no) + (at 294.64 21.59 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "f5550dac-3ac6-5688-9dda-5a5d82541cdf") + ) + (rectangle + (start 292.1 22.86) + (end 398.78 104.14) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "7b6a0b4c-0851-5aa6-afb2-27e579b152a4") + ) + (text "SENSORS / LED / EXPANSION" + (exclude_from_sim no) + (at 406.4 21.59 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "030749c6-46c7-5aa0-9aec-4df84b858a40") + ) + (rectangle + (start 403.86 22.86) + (end 579.12 238.76) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "edb4a69f-87de-5c77-bf12-4da7f0382a36") + ) + (text "USB-C + USB-SERIAL + AUTO-RESET" + (exclude_from_sim no) + (at 12.7 113.03 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "be530651-0f75-575d-b40f-f7366f9f729c") + ) + (rectangle + (start 10.16 114.3) + (end 190.5 264.16) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "ba187f4e-d9c1-54a3-a414-c8f73960763d") + ) + (text "ESP32" + (exclude_from_sim no) + (at 198.12 113.03 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "4ce1a6c4-6628-586d-95b0-560910efe84b") + ) + (rectangle + (start 195.58 114.3) + (end 398.78 264.16) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "fcc3df94-af80-5671-9ab9-ec05cdabd3e8") + ) + (text "STEPPER DRIVERS (DRV8825, 1/32 step: M0-M2, RST, SLP tied high; JP1 bridged only for A4988)" + (exclude_from_sim no) + (at 12.7 273.05 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "73d959c1-bb2b-51e4-b8c9-a5976f312a7d") + ) + (rectangle + (start 10.16 274.32) + (end 398.78 406.4) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "1be96f71-490e-5a5b-95de-022913952ec3") + ) + (text "MOUNTING (Arduino Uno pattern)" + (exclude_from_sim no) + (at 406.4 247.65 0) + (effects + (font + (size 2 2) + (bold yes) + ) + (justify left bottom) + ) + (uuid "0e78c07b-fb50-58fd-8500-187d1784c4b7") + ) + (rectangle + (start 403.86 248.92) + (end 579.12 299.72) + (stroke + (width 0.2) + (type dash) + ) + (fill + (type none) + ) + (uuid "4cb74b5d-4148-587a-814b-37d65535fbe3") + ) + (wire + (pts + (xy 214.63 138.43) + (xy 212.09 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "240551b2-9cde-5b2b-8009-ce607bce12fe") + ) + (label "EN" + (at 212.09 138.43 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "73afaca1-477b-5f9c-acba-ff5f5e14ccc7") + ) + (no_connect + (at 214.63 143.51) + (uuid "ce47185c-e25d-5e79-b67e-ba3fb3b6b08d") + ) + (no_connect + (at 214.63 146.05) + (uuid "9cc52635-bdb1-5134-9963-4b51c2aa6617") + ) + (no_connect + (at 217.17 168.91) + (uuid "6442f60e-3a8f-5735-9a87-ce9861e2230a") + ) + (no_connect + (at 217.17 171.45) + (uuid "65dab073-8da4-5a7b-ae85-73545cd6fcd1") + ) + (no_connect + (at 217.17 173.99) + (uuid "e1821caa-1180-5358-9820-b08c0cbe2751") + ) + (no_connect + (at 217.17 176.53) + (uuid "b56e2d02-5bf1-53a8-95f8-b2d442023141") + ) + (no_connect + (at 217.17 179.07) + (uuid "55b8b8b3-c043-5819-a240-5f01bd5af346") + ) + (no_connect + (at 217.17 181.61) + (uuid "920fd07c-61d1-5b5c-9cd2-13a466c5071e") + ) + (no_connect + (at 217.17 196.85) + (uuid "f86c0f01-9ffc-5af7-9c45-4b029ef1c5fc") + ) + (wire + (pts + (xy 229.87 133.35) + (xy 229.87 130.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "248c6b1a-f7c6-5eac-bde7-ffdd0b49f210") + ) + (label "+3V3" + (at 229.87 130.81 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "595ee7dc-ca5f-56e2-b82a-f0afd20cab8e") + ) + (wire + (pts + (xy 229.87 204.47) + (xy 229.87 207.01) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4f2a0de9-af13-5541-b709-e6bdc1455bf1") + ) + (label "GND" + (at 229.87 207.01 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c8844025-8726-5930-bdaf-0e39231c52b4") + ) + (wire + (pts + (xy 245.11 138.43) + (xy 247.65 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "759b2f34-5caf-5215-a3dc-5036bff7e539") + ) + (label "IO0" + (at 247.65 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "106248b5-e2fe-58c6-86f6-6fa5db6d0b04") + ) + (wire + (pts + (xy 245.11 140.97) + (xy 247.65 140.97) + ) + (stroke + (width 0) + (type default) + ) + (uuid "689befdf-10be-5e01-b121-3d1d97deb267") + ) + (label "U0TXD" + (at 247.65 140.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "981212b1-ead0-5c15-8a4c-884652a0b4d4") + ) + (wire + (pts + (xy 245.11 143.51) + (xy 247.65 143.51) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1cf3deea-fe02-5b07-99d5-4d8214664b22") + ) + (label "STAT" + (at 247.65 143.51 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "18226e67-dbc4-5e05-86bf-d248a3b589d5") + ) + (wire + (pts + (xy 245.11 146.05) + (xy 247.65 146.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8902e5da-816e-5419-9141-48eb08490bf7") + ) + (label "U0RXD" + (at 247.65 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "8ec28693-6eb8-5228-a228-8fe801e93a28") + ) + (no_connect + (at 245.11 148.59) + (uuid "0cd3df01-05c2-525c-a339-dd47f77fb5dd") + ) + (no_connect + (at 245.11 151.13) + (uuid "282595eb-16c7-548d-a305-bc9d58a7003e") + ) + (no_connect + (at 245.11 153.67) + (uuid "5bf2442f-f269-537d-b4b4-7a84d83ca661") + ) + (wire + (pts + (xy 245.11 156.21) + (xy 247.65 156.21) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ecaaed7d-2149-560f-bb48-fead9f275e2c") + ) + (label "DRV_EN" + (at 247.65 156.21 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "29e63e15-9d24-573f-850d-be5881b1d733") + ) + (wire + (pts + (xy 245.11 158.75) + (xy 247.65 158.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9212dc0f-f084-5b92-b335-198409e1aa90") + ) + (label "Y_DIR" + (at 247.65 158.75 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2fe30791-452f-5a21-950d-a6e5f1a7ce8c") + ) + (no_connect + (at 245.11 161.29) + (uuid "ba2e3412-845b-55e3-adeb-b61c063140b1") + ) + (no_connect + (at 245.11 163.83) + (uuid "9318ac4c-7c24-52f4-9d82-ede8d393e719") + ) + (no_connect + (at 245.11 166.37) + (uuid "663c73da-dd94-519f-9cd3-28dfa640f284") + ) + (wire + (pts + (xy 245.11 168.91) + (xy 247.65 168.91) + ) + (stroke + (width 0) + (type default) + ) + (uuid "431d27f6-b655-53bc-9256-7c123d22f618") + ) + (label "X_STEP" + (at 247.65 168.91 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c8f31ffb-8cec-5dcc-82bd-bd5d77a43794") + ) + (wire + (pts + (xy 245.11 171.45) + (xy 247.65 171.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d22785a9-4345-590e-83aa-3b5228125ebf") + ) + (label "X_DIR" + (at 247.65 171.45 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "99ef3eb8-94e5-5aea-bfa2-cf08b7ea327d") + ) + (no_connect + (at 245.11 173.99) + (uuid "de53363b-97cf-51a3-9a3f-3363672f98ba") + ) + (no_connect + (at 245.11 176.53) + (uuid "b58b059f-a164-5c01-aa83-31cfbda025c1") + ) + (no_connect + (at 245.11 179.07) + (uuid "e72bdd42-4992-5d77-9758-8cf536c07718") + ) + (wire + (pts + (xy 245.11 181.61) + (xy 247.65 181.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4ad4fd09-7082-5c98-a3ec-ef44408ebd44") + ) + (label "EXP_IO25" + (at 247.65 181.61 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4cf4c1c4-4d8c-5efc-8dcf-f82557989bd9") + ) + (no_connect + (at 245.11 184.15) + (uuid "00121b8f-5572-5a48-8ef8-fbb01f8137c3") + ) + (wire + (pts + (xy 245.11 186.69) + (xy 247.65 186.69) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c0023f27-8c96-59e1-a8ec-6b864179ec75") + ) + (label "Y_STEP" + (at 247.65 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "71bac29a-059e-562e-b324-408bb7708234") + ) + (wire + (pts + (xy 245.11 189.23) + (xy 247.65 189.23) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4ebd3a7c-374c-5bbc-b849-6c5f6406321c") + ) + (label "EXP_IO32" + (at 247.65 189.23 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "98b3c21d-ab0d-5963-9c70-09c44a8bb075") + ) + (wire + (pts + (xy 245.11 191.77) + (xy 247.65 191.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "82a7ecf3-b71f-533e-b13e-81f3f2dafdc3") + ) + (label "LED_DATA" + (at 247.65 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9116a2f2-5715-5ff5-9280-e924dccefb18") + ) + (wire + (pts + (xy 245.11 194.31) + (xy 247.65 194.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a2269d91-5020-5c25-b033-bd82a57c2faa") + ) + (label "HOME" + (at 247.65 194.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5140f5df-6713-5275-bec7-4552c31a5ed9") + ) + (wire + (pts + (xy 245.11 196.85) + (xy 247.65 196.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4857dc95-eaff-5a97-881c-e51d45f182fe") + ) + (label "HALL" + (at 247.65 196.85 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0531bed3-b12f-5fb2-9799-3b254c14ce86") + ) + (no_connect + (at 26.67 198.12) + (uuid "533dce6d-8017-5ada-9dcb-16882c517453") + ) + (wire + (pts + (xy 26.67 203.2) + (xy 24.13 203.2) + ) + (stroke + (width 0) + (type default) + ) + (uuid "563e5385-3369-50f2-9e3f-e2c221d614a3") + ) + (label "USB_DP" + (at 24.13 203.2 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "904aa407-f071-551b-9215-b643522171d2") + ) + (wire + (pts + (xy 26.67 205.74) + (xy 24.13 205.74) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6220a832-9101-52ca-b8cd-771f58b50a8e") + ) + (label "USB_DM" + (at 24.13 205.74 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "53e60308-aefb-5797-a751-1a39dbaead2e") + ) + (no_connect + (at 29.21 210.82) + (uuid "cece2cc4-093f-55f9-ab29-75b36654f3cb") + ) + (no_connect + (at 29.21 213.36) + (uuid "abcf1dfc-5689-54ce-874a-8c924dd56b21") + ) + (wire + (pts + (xy 34.29 190.5) + (xy 34.29 187.96) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3f1f45e3-8efd-5116-b9fb-8f3f66bb58cb") + ) + (label "+3V3" + (at 34.29 187.96 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0015e983-3de0-5060-adf9-2a1897702b17") + ) + (wire + (pts + (xy 36.83 190.5) + (xy 36.83 187.96) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0a0bc9d9-3b3e-5b30-9e3c-c3438855dbf5") + ) + (label "+3V3" + (at 36.83 187.96 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "585d84f5-005e-57bc-b0cc-703dbd1789fe") + ) + (wire + (pts + (xy 36.83 220.98) + (xy 36.83 223.52) + ) + (stroke + (width 0) + (type default) + ) + (uuid "82bc283c-e8eb-5e71-9fa1-834dff731769") + ) + (label "GND" + (at 36.83 223.52 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c426a03d-c97e-5bbc-ac08-75be9e1cf136") + ) + (wire + (pts + (xy 46.99 195.58) + (xy 49.53 195.58) + ) + (stroke + (width 0) + (type default) + ) + (uuid "05a6cfb2-64a1-518d-baf3-63e412ff92b0") + ) + (label "U0RXD" + (at 49.53 195.58 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "08a5741d-fd24-518e-86a8-b50691b11bee") + ) + (wire + (pts + (xy 46.99 198.12) + (xy 49.53 198.12) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c441b58c-7e76-5df7-9fb6-830b0321f53c") + ) + (label "U0TXD" + (at 49.53 198.12 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7bf03798-f6a9-5141-b4f3-32f09ae0ee5f") + ) + (no_connect + (at 46.99 203.2) + (uuid "4266f2d4-4584-5e83-989d-3b50a09c1109") + ) + (no_connect + (at 46.99 205.74) + (uuid "5bc325a3-3094-5140-814f-4dbd1a3f9687") + ) + (no_connect + (at 46.99 208.28) + (uuid "2c08229d-921b-598a-942e-f6db7539e8c6") + ) + (no_connect + (at 46.99 210.82) + (uuid "8a3663d1-5772-531f-99aa-3e25f2026605") + ) + (wire + (pts + (xy 46.99 213.36) + (xy 49.53 213.36) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f46395f2-2790-556a-9749-8156f2f80786") + ) + (label "DTR" + (at 49.53 213.36 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "58780722-cb98-5e2e-8439-5f05ca171227") + ) + (wire + (pts + (xy 46.99 215.9) + (xy 49.53 215.9) + ) + (stroke + (width 0) + (type default) + ) + (uuid "825e1d8e-eaba-561b-b7cd-dd491aefb540") + ) + (label "RTS" + (at 49.53 215.9 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "26f0e86d-9cb4-5287-b3f9-92ae1ddc7da6") + ) + (wire + (pts + (xy 306.07 34.29) + (xy 303.53 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "cd1d287e-85ef-541e-a364-1bce649c3767") + ) + (label "+5V" + (at 303.53 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0a1d2033-ccd4-5953-88a1-3dbc88345785") + ) + (wire + (pts + (xy 313.69 41.91) + (xy 313.69 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e20607d0-8474-579e-8b00-90f1162e596d") + ) + (label "GND" + (at 313.69 44.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "491671f5-e07b-5f65-89d3-bf83147af617") + ) + (wire + (pts + (xy 321.31 34.29) + (xy 323.85 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a0bbe717-200c-588b-9031-4b67aff89671") + ) + (label "+3V3" + (at 323.85 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "97596b5c-7841-5466-8a83-fe19b3916a81") + ) + (wire + (pts + (xy 453.39 90.17) + (xy 450.85 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9cb4e56a-8b33-5266-8fbf-09b321da3b4e") + ) + (label "LED_DATA" + (at 450.85 90.17 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "05c9a9bb-2384-54ad-a839-fc8181fddfa6") + ) + (wire + (pts + (xy 463.55 80.01) + (xy 463.55 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "74cd4ee2-6630-5f69-99c3-3f75cbc50b8c") + ) + (label "+5V" + (at 463.55 77.47 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "cfc012d7-ada0-596a-9289-038b63106c17") + ) + (wire + (pts + (xy 463.55 100.33) + (xy 463.55 102.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c724b752-32bc-5a4a-9ec3-1e117627eb1d") + ) + (label "GND" + (at 463.55 102.87 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "552ceb3c-dceb-53ff-872e-d1e287a9c217") + ) + (wire + (pts + (xy 468.63 80.01) + (xy 468.63 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b0208973-d970-549d-a675-b7381abd21f1") + ) + (label "GND" + (at 468.63 77.47 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9e52d0ff-3457-59bf-9975-c4f0d4674b01") + ) + (wire + (pts + (xy 481.33 90.17) + (xy 483.87 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "95bd2994-db0b-5ca9-9b4e-ef5c163d60db") + ) + (label "LED_BUF" + (at 483.87 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c5ef0e0c-b97b-59c1-9369-816d110e96a2") + ) + (wire + (pts + (xy 132.08 34.29) + (xy 129.54 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4a5b065a-8d0a-5a81-b642-a1351f9c473b") + ) + (label "+12V" + (at 129.54 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "68bdffdf-210d-5e24-9b0f-21bb6f522972") + ) + (wire + (pts + (xy 139.7 41.91) + (xy 139.7 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d465fd99-9b61-559d-9407-5924bdd5500c") + ) + (label "GND" + (at 139.7 44.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "52f08aa0-69a6-529a-aa85-eb289a9b8cab") + ) + (wire + (pts + (xy 147.32 34.29) + (xy 149.86 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1f07d8dc-6df2-5a3a-9474-a547f6e7e9cc") + ) + (label "+5V_REG" + (at 149.86 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "bc8b29e3-6a84-5ee4-bd07-82fdf13dae63") + ) + (wire + (pts + (xy 27.94 299.72) + (xy 25.4 299.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "db83e19e-bc66-59f0-9c8b-fc7ffda64cdc") + ) + (label "+3V3" + (at 25.4 299.72 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "66605783-91b1-53f4-9dc7-5c547d1afd6d") + ) + (wire + (pts + (xy 27.94 302.26) + (xy 25.4 302.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c82b44c0-11fb-577e-b4b2-cdc3944a9dc7") + ) + (label "+3V3" + (at 25.4 302.26 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9bcb9929-ac0e-5afc-af57-2fe90ab46521") + ) + (wire + (pts + (xy 27.94 307.34) + (xy 25.4 307.34) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5ff9a319-c4e8-5cef-a23d-bc6dd6a8dce5") + ) + (label "DRV_EN" + (at 25.4 307.34 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c6311a5f-6c65-5d7a-978c-1f2e744b6403") + ) + (wire + (pts + (xy 27.94 309.88) + (xy 25.4 309.88) + ) + (stroke + (width 0) + (type default) + ) + (uuid "02270a63-36d5-5128-9b49-60168ee21660") + ) + (label "X_STEP" + (at 25.4 309.88 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "27dcc4b2-6c10-5bec-a3da-228ffdcf6601") + ) + (wire + (pts + (xy 27.94 312.42) + (xy 25.4 312.42) + ) + (stroke + (width 0) + (type default) + ) + (uuid "40ee370f-a838-5920-9add-05c2f2943b88") + ) + (label "X_DIR" + (at 25.4 312.42 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e9e3cc02-4b39-5c64-8364-97aae3317bca") + ) + (wire + (pts + (xy 27.94 317.5) + (xy 25.4 317.5) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3f142582-4da6-5c19-93b3-3c09aff397c2") + ) + (label "+3V3" + (at 25.4 317.5 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "828169bb-afcb-5d02-bbb4-5339dcace2ae") + ) + (wire + (pts + (xy 27.94 320.04) + (xy 25.4 320.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5837a6fa-790d-5098-b9e7-550e12870125") + ) + (label "+3V3" + (at 25.4 320.04 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4e386434-8ef1-5e1d-b885-5fcfd596aaf9") + ) + (wire + (pts + (xy 27.94 322.58) + (xy 25.4 322.58) + ) + (stroke + (width 0) + (type default) + ) + (uuid "917c82ca-554c-570f-a31c-9f1ad2c61962") + ) + (label "+3V3" + (at 25.4 322.58 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "dfe3d2ff-655d-5d2c-96a9-23a85f213782") + ) + (wire + (pts + (xy 38.1 292.1) + (xy 38.1 289.56) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fca90555-a9c7-5c24-be78-40bc71d9d28d") + ) + (label "DRV_VDD" + (at 38.1 289.56 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "6004313c-d54d-5036-9ac2-fe693a265f9f") + ) + (wire + (pts + (xy 38.1 330.2) + (xy 38.1 332.74) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fc390c11-4a0a-59f8-8d85-bf08bd4a8265") + ) + (label "GND" + (at 38.1 332.74 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e28932a0-f3c5-5fa4-9982-297de7457d17") + ) + (wire + (pts + (xy 43.18 292.1) + (xy 43.18 289.56) + ) + (stroke + (width 0) + (type default) + ) + (uuid "097d1504-71dd-5c64-99f1-c8c37c01d503") + ) + (label "+12V" + (at 43.18 289.56 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4dc5cc49-05bd-5d6d-8789-bd98bf5f332f") + ) + (wire + (pts + (xy 43.18 330.2) + (xy 43.18 332.74) + ) + (stroke + (width 0) + (type default) + ) + (uuid "15cbe2f5-70f1-5731-9b5f-6e80043c298a") + ) + (label "GND" + (at 43.18 332.74 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a51280e3-9f9a-59f6-8bce-680ea2a4fb7e") + ) + (wire + (pts + (xy 50.8 307.34) + (xy 53.34 307.34) + ) + (stroke + (width 0) + (type default) + ) + (uuid "68086cd8-ccc4-5909-bc40-32f2903e2e40") + ) + (label "X_1B" + (at 53.34 307.34 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c1616b41-e81a-56bc-a372-f8112e1d47d3") + ) + (wire + (pts + (xy 50.8 309.88) + (xy 53.34 309.88) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a4c39832-89e1-564c-a322-312bb5e9d48c") + ) + (label "X_1A" + (at 53.34 309.88 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ecd4f545-77aa-57a9-9d1a-9601682c8217") + ) + (wire + (pts + (xy 50.8 312.42) + (xy 53.34 312.42) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2fc74957-c310-512e-8c70-f3525a0bb6d2") + ) + (label "X_2A" + (at 53.34 312.42 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4af97676-d89d-5eb6-917a-ab761c5cf1e2") + ) + (wire + (pts + (xy 50.8 314.96) + (xy 53.34 314.96) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e3bd0e27-83c0-5453-9345-964408e1f9d6") + ) + (label "X_2B" + (at 53.34 314.96 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "62a37878-e299-5c88-a516-cf5c5b89a8bc") + ) + (wire + (pts + (xy 133.35 299.72) + (xy 130.81 299.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "cc8b9af3-dc7a-53b3-8ac2-591acc9ac129") + ) + (label "+3V3" + (at 130.81 299.72 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ace3f0bf-203e-50dd-ae2e-e7c74b0bcb6b") + ) + (wire + (pts + (xy 133.35 302.26) + (xy 130.81 302.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "24448229-1f3d-536e-9982-45cd3204122d") + ) + (label "+3V3" + (at 130.81 302.26 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "bae43b6a-f9b0-57e5-9798-0deb130291c6") + ) + (wire + (pts + (xy 133.35 307.34) + (xy 130.81 307.34) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3b4c3295-feea-5c66-a111-6c9df25a1e5c") + ) + (label "DRV_EN" + (at 130.81 307.34 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c96a28b9-4a31-5a4b-8bb3-e7b03daee7b4") + ) + (wire + (pts + (xy 133.35 309.88) + (xy 130.81 309.88) + ) + (stroke + (width 0) + (type default) + ) + (uuid "15e96512-083a-5da9-83d9-429fa822179d") + ) + (label "Y_STEP" + (at 130.81 309.88 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a7a39c20-bc49-53c2-8244-43cbc8d84026") + ) + (wire + (pts + (xy 133.35 312.42) + (xy 130.81 312.42) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b44654b2-35c4-56af-a544-a01a0ab9c28d") + ) + (label "Y_DIR" + (at 130.81 312.42 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "69f79e63-2489-5dc3-a1c2-b1986cf4dfb6") + ) + (wire + (pts + (xy 133.35 317.5) + (xy 130.81 317.5) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2333baeb-2232-51fa-89ab-460dfec900db") + ) + (label "+3V3" + (at 130.81 317.5 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2b43bc52-8176-527f-a317-50b531957e0a") + ) + (wire + (pts + (xy 133.35 320.04) + (xy 130.81 320.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "bb5f7eb1-a1b3-51fd-90cb-68e90edb731b") + ) + (label "+3V3" + (at 130.81 320.04 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "06c9abb3-c678-5a5a-9c84-1618662164d1") + ) + (wire + (pts + (xy 133.35 322.58) + (xy 130.81 322.58) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3eebcaad-66c7-5d12-bed9-afb2756ad8e9") + ) + (label "+3V3" + (at 130.81 322.58 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b4312fb1-6f65-574b-819a-a2417686add2") + ) + (wire + (pts + (xy 143.51 292.1) + (xy 143.51 289.56) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9d67cb5e-2124-521c-a890-fe4a174a14f0") + ) + (label "DRV_VDD" + (at 143.51 289.56 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c3fbaf9d-a9e4-5de5-9f4a-df28ce527316") + ) + (wire + (pts + (xy 143.51 330.2) + (xy 143.51 332.74) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d174b662-92af-5a7c-bb71-d53c9b97674f") + ) + (label "GND" + (at 143.51 332.74 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5ab25ac4-4982-55ba-8002-5f64c894e20a") + ) + (wire + (pts + (xy 148.59 292.1) + (xy 148.59 289.56) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4ba3be51-d939-5caa-8d4d-39927b66c408") + ) + (label "+12V" + (at 148.59 289.56 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d82bf5d8-4f27-57cb-8f0d-aeacb8b02473") + ) + (wire + (pts + (xy 148.59 330.2) + (xy 148.59 332.74) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7938a9ee-fbe3-555e-aea6-72534d83865f") + ) + (label "GND" + (at 148.59 332.74 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "15b88329-289c-56dd-a61a-5ad5f0e2b393") + ) + (wire + (pts + (xy 156.21 307.34) + (xy 158.75 307.34) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fa0b7692-89fe-5761-b472-ad8c0fd7e802") + ) + (label "Y_1B" + (at 158.75 307.34 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "3ff47baa-6a5a-55be-b549-363aafe55bd8") + ) + (wire + (pts + (xy 156.21 309.88) + (xy 158.75 309.88) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ba1ef9ad-edb9-502d-b3ab-778af4636257") + ) + (label "Y_1A" + (at 158.75 309.88 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "eaeba0c5-79a6-5ddd-871d-8f41bc1cf5c9") + ) + (wire + (pts + (xy 156.21 312.42) + (xy 158.75 312.42) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1f9e1b6e-702a-54d7-840f-6131039eb93e") + ) + (label "Y_2A" + (at 158.75 312.42 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "177ebd68-e310-517f-8a54-6926b08fe5ad") + ) + (wire + (pts + (xy 156.21 314.96) + (xy 158.75 314.96) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0f00f35a-ab7b-550e-882c-4f800bbb759f") + ) + (label "Y_2B" + (at 158.75 314.96 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "21cccfe5-72bf-5b19-b7c2-fbc7b56b1c75") + ) + (wire + (pts + (xy 30.48 34.29) + (xy 33.02 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "285630b8-1a12-5edc-bfaa-666d41c689d7") + ) + (label "VIN_RAW" + (at 33.02 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "41d6339f-fea5-535c-91dd-7ca473c5cdf7") + ) + (wire + (pts + (xy 30.48 39.37) + (xy 33.02 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3ebb8b51-dfe6-5c3d-8348-d3648406c91e") + ) + (label "GND" + (at 33.02 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "cc5e5835-2072-51f0-bd4b-ada783e21836") + ) + (wire + (pts + (xy 20.32 165.1) + (xy 20.32 167.64) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a6d724de-fc59-53af-ad2a-c2280438bdf1") + ) + (label "GND" + (at 20.32 167.64 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "d7c8f541-3ced-552b-abd6-ce6fc38cbec0") + ) + (wire + (pts + (xy 27.94 165.1) + (xy 27.94 167.64) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b3fa874c-555a-52a1-ba22-7503c5a78ac5") + ) + (label "GND" + (at 27.94 167.64 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "40d367c4-8a7a-5684-99c8-50d1d5c844cb") + ) + (wire + (pts + (xy 43.18 127) + (xy 45.72 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "85c06a6c-20de-5ee9-aaaa-8efa89953442") + ) + (label "VBUS" + (at 45.72 127 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "33d0a12b-ed91-52a3-bfe5-ddf71b3f6985") + ) + (wire + (pts + (xy 43.18 132.08) + (xy 45.72 132.08) + ) + (stroke + (width 0) + (type default) + ) + (uuid "74c58708-696f-5e55-92a8-88191af5c46a") + ) + (label "CC1" + (at 45.72 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d61fb12e-575a-58ea-b1d7-ba1561896225") + ) + (wire + (pts + (xy 43.18 134.62) + (xy 45.72 134.62) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c8121594-e5e4-5825-b211-16babb534917") + ) + (label "CC2" + (at 45.72 134.62 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "777124c7-fac3-5e5f-8abb-e12881a513b5") + ) + (wire + (pts + (xy 43.18 139.7) + (xy 45.72 139.7) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c69e2910-9ce0-5424-85e5-6810215e5249") + ) + (label "USB_DM" + (at 45.72 139.7 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "38e19b47-f9bb-5dae-9dff-e3ed48997d5e") + ) + (wire + (pts + (xy 43.18 142.24) + (xy 45.72 142.24) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0b5e6f0a-e257-57d5-8203-d2eeff02290f") + ) + (label "USB_DM" + (at 45.72 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "073e0f18-acb4-5c0b-a1ac-2ca7de6958f0") + ) + (wire + (pts + (xy 43.18 144.78) + (xy 45.72 144.78) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0126e622-630e-5d1c-90ea-2b11ee895fad") + ) + (label "USB_DP" + (at 45.72 144.78 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "80c8c39f-a212-5238-8714-39ca970cf9b2") + ) + (wire + (pts + (xy 43.18 147.32) + (xy 45.72 147.32) + ) + (stroke + (width 0) + (type default) + ) + (uuid "712a0290-63c1-5ca9-8a1c-ac829e41a138") + ) + (label "USB_DP" + (at 45.72 147.32 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "b90c4dc0-50cc-5e6a-9668-89eaf14980bb") + ) + (no_connect + (at 43.18 154.94) + (uuid "6ca95355-0b77-5fae-8f30-ec5d7a641d43") + ) + (no_connect + (at 43.18 157.48) + (uuid "8fe86768-10ef-56a1-aeba-3eba56da0d6e") + ) + (wire + (pts + (xy 106.68 285.75) + (xy 104.14 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8b1ae5de-70e2-5a09-8e27-e7d1e6b89193") + ) + (label "X_2B" + (at 104.14 285.75 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3481df08-73f3-53ad-a036-fd83e7b6bc79") + ) + (wire + (pts + (xy 106.68 288.29) + (xy 104.14 288.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d46f924b-e3af-53d1-8e2e-bcad86e03cb8") + ) + (label "X_2A" + (at 104.14 288.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e99a2be3-5ae8-5023-b7f9-f6edf4c29a06") + ) + (wire + (pts + (xy 106.68 290.83) + (xy 104.14 290.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c448b45c-2704-5c77-a91d-958c1aff3ee1") + ) + (label "X_1A" + (at 104.14 290.83 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b7939d91-b2f6-57b0-9769-5d0e46160677") + ) + (wire + (pts + (xy 106.68 293.37) + (xy 104.14 293.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3d5c691c-6189-5c38-b184-d6e98f239c0b") + ) + (label "X_1B" + (at 104.14 293.37 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6e82e8a6-74ee-53cb-8481-790322ef0a38") + ) + (wire + (pts + (xy 212.09 285.75) + (xy 209.55 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "837bf3b7-5cd5-5581-b163-a900f0849d0c") + ) + (label "Y_1B" + (at 209.55 285.75 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "54681149-c7f4-5270-9eee-173e12968bae") + ) + (wire + (pts + (xy 212.09 288.29) + (xy 209.55 288.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7a4e287e-8193-5c44-bdd3-d3f4540ec561") + ) + (label "Y_1A" + (at 209.55 288.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "36991c31-258e-541d-a57d-d2bf26a6c11e") + ) + (wire + (pts + (xy 212.09 290.83) + (xy 209.55 290.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8ebcd799-cf39-5322-9560-e724044d7632") + ) + (label "Y_2A" + (at 209.55 290.83 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b4dddff5-d181-5377-a87e-3168691570a8") + ) + (wire + (pts + (xy 212.09 293.37) + (xy 209.55 293.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0a520729-63dc-54d0-8c8a-1f5d34654447") + ) + (label "Y_2B" + (at 209.55 293.37 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "31d40ac4-bd25-5c26-8450-dc3f60c68eac") + ) + (wire + (pts + (xy 422.91 34.29) + (xy 420.37 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "382b1290-c4c9-55f1-ba25-c299efe5a27b") + ) + (label "+3V3" + (at 420.37 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e81b6694-4b6e-5f90-b69c-17140cb58c9a") + ) + (wire + (pts + (xy 422.91 36.83) + (xy 420.37 36.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "56c603fa-82b4-553e-b349-250f054a5558") + ) + (label "HOME_RAW" + (at 420.37 36.83 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "54e79fb0-4d43-503c-aab0-d140183e73b2") + ) + (wire + (pts + (xy 422.91 39.37) + (xy 420.37 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "60eca482-5ee8-5020-9a0a-62e3199c7b06") + ) + (label "GND" + (at 420.37 39.37 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c61d8304-e958-5d34-b8f2-7901d154a4b6") + ) + (wire + (pts + (xy 519.43 34.29) + (xy 516.89 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1c369516-5e16-5eb1-a4da-54a50be79b36") + ) + (label "+5V" + (at 516.89 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0028acea-7355-5e8d-8697-7b15c70e7db9") + ) + (wire + (pts + (xy 519.43 36.83) + (xy 516.89 36.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3daef444-57c5-5cd8-a2bf-74e344d3de8c") + ) + (label "HALL_RAW" + (at 516.89 36.83 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "49ce8753-a0c6-5ad1-bd54-aae940c30635") + ) + (wire + (pts + (xy 519.43 39.37) + (xy 516.89 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "67b361cd-f10b-56a1-8ce9-fd5fb6ed6758") + ) + (label "GND" + (at 516.89 39.37 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3a9aea9d-f35a-50bd-9efb-7c41ceb05365") + ) + (wire + (pts + (xy 541.02 72.39) + (xy 538.48 72.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "04c22da0-720f-516e-9d30-6631a5d4830c") + ) + (label "+5V" + (at 538.48 72.39 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "210a0cda-05d5-5ca2-a98e-8dd7ea18a743") + ) + (wire + (pts + (xy 541.02 74.93) + (xy 538.48 74.93) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e72cd9ac-bf2a-5219-945c-cd4f1cbbd300") + ) + (label "LED_DOUT" + (at 538.48 74.93 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3e8c4e3f-b410-5cf2-b1c4-c23d5e1e1aa7") + ) + (wire + (pts + (xy 541.02 77.47) + (xy 538.48 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ad44e253-f4fd-5f04-a907-280e8ef3a293") + ) + (label "GND" + (at 538.48 77.47 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b98c9188-8a7d-5ef2-94cf-59fb3da48486") + ) + (wire + (pts + (xy 422.91 123.19) + (xy 420.37 123.19) + ) + (stroke + (width 0) + (type default) + ) + (uuid "76a336bb-2191-5d9c-aa55-649242e2d0a9") + ) + (label "+3V3" + (at 420.37 123.19 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "59d00538-6cf4-5a65-8d97-16dbf4f29aa6") + ) + (wire + (pts + (xy 422.91 125.73) + (xy 420.37 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "890fe17a-45ee-5110-8341-3f233bcdd01a") + ) + (label "EXP_IO32" + (at 420.37 125.73 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "442c3c01-d75f-5375-b407-b1f276db7459") + ) + (wire + (pts + (xy 422.91 128.27) + (xy 420.37 128.27) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9ef4f77a-4fcb-5d26-bd02-8444f7129ea2") + ) + (label "EXP_IO25" + (at 420.37 128.27 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "f438d150-fc49-5bf6-b8a8-9308f481e03f") + ) + (wire + (pts + (xy 422.91 130.81) + (xy 420.37 130.81) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6f3db542-cf54-5857-ba59-54827b303bbc") + ) + (label "GND" + (at 420.37 130.81 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c7bdd607-bc4a-5618-ae78-253e6a075c13") + ) + (wire + (pts + (xy 76.2 34.29) + (xy 73.66 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b3ad7530-36b0-5669-9ea4-ea5295c0d1ab") + ) + (label "+12V" + (at 73.66 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2c2d864a-7a75-529d-b81f-7eee8838b661") + ) + (wire + (pts + (xy 83.82 34.29) + (xy 86.36 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d4896aed-c1e7-5a85-b7e1-e1728e8a106b") + ) + (label "VIN_FUSED" + (at 86.36 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0acdb5d7-5c5f-5568-8720-909f0b92b658") + ) + (wire + (pts + (xy 191.77 34.29) + (xy 189.23 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6b18c2b7-55ce-5f0c-ad01-84b17d3d2354") + ) + (label "+5V" + (at 189.23 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8a5454cc-0f53-5609-93e5-0ae27038dad9") + ) + (wire + (pts + (xy 199.39 34.29) + (xy 201.93 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "26724735-2cf2-5ca0-99b4-d91b36231ae8") + ) + (label "+5V_REG" + (at 201.93 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "c102b5cf-3001-5b1b-a944-93b0a20138f6") + ) + (wire + (pts + (xy 130.81 125.73) + (xy 128.27 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dcaeb38d-1aaf-5f45-bee7-411c1614d90a") + ) + (label "+5V" + (at 128.27 125.73 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ef327c8a-435f-54f1-b9ef-f363d08b80bf") + ) + (wire + (pts + (xy 138.43 125.73) + (xy 140.97 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "cdebd846-2c46-558e-8895-5e5a11e4bdeb") + ) + (label "VBUS" + (at 140.97 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ffb29677-ec4f-56a6-9fc9-7784edfccf59") + ) + (wire + (pts + (xy 236.22 227.33) + (xy 233.68 227.33) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f260f8f1-9f98-57e4-9cdf-0699b9c53733") + ) + (label "GND" + (at 233.68 227.33 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "63655738-88bc-5801-93fa-3afa5713c6f9") + ) + (wire + (pts + (xy 243.84 227.33) + (xy 246.38 227.33) + ) + (stroke + (width 0) + (type default) + ) + (uuid "398869ca-de05-5bed-a387-1d66044c86b6") + ) + (label "PWR_A" + (at 246.38 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a8006df4-5013-5692-8630-88cec5e74228") + ) + (wire + (pts + (xy 283.21 227.33) + (xy 280.67 227.33) + ) + (stroke + (width 0) + (type default) + ) + (uuid "689d27ff-6a72-557a-9eda-9a03fd7688a4") + ) + (label "GND" + (at 280.67 227.33 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9e478cb9-a2dd-5b8f-a0a7-443d6065762b") + ) + (wire + (pts + (xy 290.83 227.33) + (xy 293.37 227.33) + ) + (stroke + (width 0) + (type default) + ) + (uuid "bae3e175-79f8-51f3-806d-a6f812cdb46f") + ) + (label "STAT_A" + (at 293.37 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "45c29b10-27e7-5497-ad49-e705a21a1de7") + ) + (wire + (pts + (xy 85.09 191.77) + (xy 82.55 191.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9ee11167-49eb-502f-b473-863ce6a8e34a") + ) + (label "Q1B" + (at 82.55 191.77 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "80752556-b836-53e8-b4c4-d49a3b8bc151") + ) + (wire + (pts + (xy 92.71 186.69) + (xy 92.71 184.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c7aaa577-b084-5bda-94f1-3ffb9796cc3f") + ) + (label "EN" + (at 92.71 184.15 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "6501c243-1f14-553f-b99e-0a9e80da7fbc") + ) + (wire + (pts + (xy 92.71 196.85) + (xy 92.71 199.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8574162b-0e77-5455-9e27-221ea238ec48") + ) + (label "RTS" + (at 92.71 199.39 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "cded54e3-bf72-5c7c-8686-f2776a974fbf") + ) + (wire + (pts + (xy 121.92 191.77) + (xy 119.38 191.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "811f68e2-04e0-533b-94bc-f8ca1d2aaac1") + ) + (label "Q2B" + (at 119.38 191.77 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "a1efbcc1-9210-50fc-8158-c970b5e3f454") + ) + (wire + (pts + (xy 129.54 186.69) + (xy 129.54 184.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5f1a0c26-edab-5c75-9b76-c827eb6528ae") + ) + (label "IO0" + (at 129.54 184.15 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "fc1b28fb-5cb6-541c-9b69-48bca16ec81f") + ) + (wire + (pts + (xy 129.54 196.85) + (xy 129.54 199.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "53dc5888-cd96-5cd7-bb46-32c59b3af290") + ) + (label "DTR" + (at 129.54 199.39 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9738fe32-9926-50c3-bb97-a7773528b034") + ) + (wire + (pts + (xy 326.39 127) + (xy 323.85 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "949c2e01-ca99-583c-b922-6905c9c2e8d9") + ) + (label "EN" + (at 323.85 127 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "8f576857-fc53-581d-b9d3-b86647f4dfcc") + ) + (wire + (pts + (xy 336.55 127) + (xy 339.09 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ab99adfe-06e8-5a90-bcbb-37a0e4fd0d24") + ) + (label "GND" + (at 339.09 127 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5f76891e-3ad0-5d0b-83ea-c18be0d8aa3d") + ) + (wire + (pts + (xy 369.57 127) + (xy 367.03 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ab2f8fec-b832-5738-b8ec-37f53f210078") + ) + (label "IO0" + (at 367.03 127 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "be0977c1-5677-5534-a5b8-7321a6b58dca") + ) + (wire + (pts + (xy 379.73 127) + (xy 382.27 127) + ) + (stroke + (width 0) + (type default) + ) + (uuid "48e9fcda-f4a5-50da-a474-78c5f2c076fc") + ) + (label "GND" + (at 382.27 127 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "cd921286-56dc-5a58-9dc9-934f91c2d19f") + ) + (wire + (pts + (xy 73.66 288.29) + (xy 73.66 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "15020051-15ad-5663-9ab6-497b4ef2547c") + ) + (label "+12V" + (at 73.66 285.75 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f11337f7-b67d-5c10-86d1-8eaa1ccc1ca5") + ) + (wire + (pts + (xy 73.66 295.91) + (xy 73.66 298.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d03f01b7-8375-52e0-87df-aa46186d276d") + ) + (label "GND" + (at 73.66 298.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3e8a3715-5e5f-5e2e-8c7c-454d3c90e217") + ) + (wire + (pts + (xy 179.07 288.29) + (xy 179.07 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d6ac0a62-53b6-5a02-b9aa-6550b3604978") + ) + (label "+12V" + (at 179.07 285.75 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "b754fa64-5c9b-5442-80ac-e354e75c8dc0") + ) + (wire + (pts + (xy 179.07 295.91) + (xy 179.07 298.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "04fd0ce8-5034-51ad-a9ed-8a4e2cf8cf08") + ) + (label "GND" + (at 179.07 298.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "69e1457f-7e36-5d6f-bcf4-33c1835c8848") + ) + (wire + (pts + (xy 109.22 36.83) + (xy 109.22 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a59f291a-da77-51e8-b88e-ab6ff66edaaf") + ) + (label "+12V" + (at 109.22 34.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0922a21f-ffc2-52e9-ab33-c385b5947f31") + ) + (wire + (pts + (xy 109.22 44.45) + (xy 109.22 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1a5d42f0-1363-5f70-8dd0-771e9eadacb1") + ) + (label "GND" + (at 109.22 46.99 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2fc193db-51ec-594b-b72e-ad03c7025299") + ) + (wire + (pts + (xy 168.91 40.64) + (xy 168.91 38.1) + ) + (stroke + (width 0) + (type default) + ) + (uuid "40b37018-316b-5c1c-91bf-491e97b7178f") + ) + (label "+5V_REG" + (at 168.91 38.1 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e3f47ce9-ef4f-5133-b171-b57293451de1") + ) + (wire + (pts + (xy 168.91 48.26) + (xy 168.91 50.8) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8cb1f829-8a95-502f-ba7e-43f6dd93cf45") + ) + (label "GND" + (at 168.91 50.8 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5253f3e0-48c6-5dd0-8de3-ef6338dac2ec") + ) + (wire + (pts + (xy 340.36 35.56) + (xy 340.36 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b44eb278-3909-5a77-a826-83b21a7e90eb") + ) + (label "+5V" + (at 340.36 33.02 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "a1608ecc-b559-5956-b4e4-b8f4d4a97ac0") + ) + (wire + (pts + (xy 340.36 43.18) + (xy 340.36 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4664b9a7-1e5f-5694-958d-92c3fa20703e") + ) + (label "GND" + (at 340.36 45.72 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "90de926b-4b56-5d43-beae-8730791b51d2") + ) + (wire + (pts + (xy 354.33 36.83) + (xy 354.33 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "96d9b56c-2bcb-5ebd-8a3d-513ccea66e8d") + ) + (label "+3V3" + (at 354.33 34.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "9e4cee65-7443-59c7-9517-c631f47b6873") + ) + (wire + (pts + (xy 354.33 44.45) + (xy 354.33 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ed2ec075-9938-5e06-960f-3a2ba3d4591d") + ) + (label "GND" + (at 354.33 46.99 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5a9352d3-9e83-54e5-bdc6-3ec011517428") + ) + (wire + (pts + (xy 68.58 187.96) + (xy 68.58 185.42) + ) + (stroke + (width 0) + (type default) + ) + (uuid "461102e2-506d-514a-9a89-d49c11ae2046") + ) + (label "+3V3" + (at 68.58 185.42 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7226f7c5-b5bc-5ebe-aa3b-7acbdd542256") + ) + (wire + (pts + (xy 68.58 195.58) + (xy 68.58 198.12) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9b7c39f5-977c-5c02-b7df-bdaf64cf3591") + ) + (label "GND" + (at 68.58 198.12 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5cfd9dd6-a4f6-50b1-bb41-59bf88073516") + ) + (wire + (pts + (xy 309.88 127) + (xy 309.88 124.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6a712957-2afa-514e-9c72-8d8a337ff31e") + ) + (label "EN" + (at 309.88 124.46 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2c435da1-dc53-5a14-b86e-1b5988ce798a") + ) + (wire + (pts + (xy 309.88 134.62) + (xy 309.88 137.16) + ) + (stroke + (width 0) + (type default) + ) + (uuid "00aaa826-4618-5d26-8d50-a692586eb968") + ) + (label "GND" + (at 309.88 137.16 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e124b0e8-caf1-5469-8ede-8cb97cd8ad3a") + ) + (wire + (pts + (xy 269.24 128.27) + (xy 269.24 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dc0f6651-c2cb-5305-911e-a41e88e00ab4") + ) + (label "+3V3" + (at 269.24 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "d47925ff-0bee-507b-9384-a52029640c0d") + ) + (wire + (pts + (xy 269.24 135.89) + (xy 269.24 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9419d5ad-0047-56bf-b328-3e847ed509fd") + ) + (label "GND" + (at 269.24 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "99964031-9999-5304-9721-b42d29da88b8") + ) + (wire + (pts + (xy 283.21 128.27) + (xy 283.21 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "323d65a0-97b1-5279-a151-0ff8b5551717") + ) + (label "+3V3" + (at 283.21 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "7f37edb5-7184-5d98-b37e-745fccf2e77f") + ) + (wire + (pts + (xy 283.21 135.89) + (xy 283.21 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "03d0a366-fb75-5975-b1eb-a1bf2467a30e") + ) + (label "GND" + (at 283.21 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9a93878d-4aaf-5157-a8f8-4a48e786a3ea") + ) + (wire + (pts + (xy 466.09 36.83) + (xy 466.09 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "de5a2460-14b6-5ac1-be96-f4045b670961") + ) + (label "HOME" + (at 466.09 34.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "82f69539-2e7d-5351-9d8b-78696732c456") + ) + (wire + (pts + (xy 466.09 44.45) + (xy 466.09 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8f01d78f-16b3-5b3c-a8ac-c840f8c9a820") + ) + (label "GND" + (at 466.09 46.99 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ee597be2-61ca-5e24-acb7-bbdf1233135a") + ) + (wire + (pts + (xy 562.61 36.83) + (xy 562.61 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "609b411c-e971-5514-bd4d-bdbc13264894") + ) + (label "HALL" + (at 562.61 34.29 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2b109017-d014-5dc1-b46b-14b56fbe2379") + ) + (wire + (pts + (xy 562.61 44.45) + (xy 562.61 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3210dbd0-7ecb-57af-8790-1a24df4d8109") + ) + (label "GND" + (at 562.61 46.99 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "da1cfc27-2353-5986-be70-3699cd37d817") + ) + (wire + (pts + (xy 505.46 73.66) + (xy 505.46 71.12) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dc26399d-db9d-5e24-ba5c-02e4eec6fc5e") + ) + (label "+5V" + (at 505.46 71.12 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1e5fb730-64ef-5029-b9ed-050af2e18814") + ) + (wire + (pts + (xy 505.46 81.28) + (xy 505.46 83.82) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9435e556-76db-59b4-ab7b-84fc9b487dbe") + ) + (label "GND" + (at 505.46 83.82 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2538f211-c2be-572f-a08c-d601cec4b82b") + ) + (wire + (pts + (xy 101.6 127) + (xy 101.6 124.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8951bea3-c0c9-51fa-a6e3-bf391b4ffc92") + ) + (label "CC1" + (at 101.6 124.46 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "83588c83-5a21-58ec-9b17-e7cf61788708") + ) + (wire + (pts + (xy 101.6 134.62) + (xy 101.6 137.16) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6c9c533c-1bad-56ab-ac93-f7a12c21b761") + ) + (label "GND" + (at 101.6 137.16 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ea995602-49f9-5f98-8da2-27dcbf8f7cf2") + ) + (wire + (pts + (xy 113.03 127) + (xy 113.03 124.46) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2f55b9b9-f9d8-59e8-a497-fa2f9f65b77d") + ) + (label "CC2" + (at 113.03 124.46 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "913632a8-b571-535a-87d5-baa6c0619550") + ) + (wire + (pts + (xy 113.03 134.62) + (xy 113.03 137.16) + ) + (stroke + (width 0) + (type default) + ) + (uuid "15cc7004-4b1e-56fd-b9ae-33435114874a") + ) + (label "GND" + (at 113.03 137.16 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5175c860-a079-56b9-b652-d8e36b00acad") + ) + (wire + (pts + (xy 105.41 186.69) + (xy 105.41 184.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9dd67dd8-ab4c-52c2-9598-e2a551927cb3") + ) + (label "DTR" + (at 105.41 184.15 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1d95ffd5-ca2b-5cfd-b60b-0c3291686653") + ) + (wire + (pts + (xy 105.41 194.31) + (xy 105.41 196.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "abdf445f-fbeb-5776-bf60-519dc95cad48") + ) + (label "Q1B" + (at 105.41 196.85 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "44e6b9e2-af05-5918-8156-f26c895d4d9d") + ) + (wire + (pts + (xy 142.24 186.69) + (xy 142.24 184.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "48d9e9a3-c1fd-5d3f-84f9-bae4161ab5fc") + ) + (label "RTS" + (at 142.24 184.15 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "58130bcb-6640-5882-bf11-4f23657f2a13") + ) + (wire + (pts + (xy 142.24 194.31) + (xy 142.24 196.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "88eca8ba-b1b6-5416-979b-1d5f5fe6435d") + ) + (label "Q2B" + (at 142.24 196.85 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "eb43a7a5-2cd3-56a6-84d4-ac232d037e94") + ) + (wire + (pts + (xy 295.91 128.27) + (xy 295.91 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c355e512-5428-5414-8027-19fb9897f2a4") + ) + (label "+3V3" + (at 295.91 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "5e5c0a8d-499b-5f3d-b605-4290b30fc045") + ) + (wire + (pts + (xy 295.91 135.89) + (xy 295.91 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2e9ff12d-a30a-52bd-8ca3-6970dc3ae8a2") + ) + (label "EN" + (at 295.91 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9c2a1b41-2f62-5b5b-9bb6-120ebe38fcb3") + ) + (wire + (pts + (xy 353.06 128.27) + (xy 353.06 125.73) + ) + (stroke + (width 0) + (type default) + ) + (uuid "eff3d8ad-0543-5a3d-a6e9-ea7fcce6a07f") + ) + (label "+3V3" + (at 353.06 125.73 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "74598f1d-ac1c-5fc2-ab85-6c878de65d6e") + ) + (wire + (pts + (xy 353.06 135.89) + (xy 353.06 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b6f6fced-0663-5511-a6f6-708181d9cf16") + ) + (label "IO0" + (at 353.06 138.43 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "99ee6f18-f5b6-5f1d-9c81-7ec610ce9311") + ) + (wire + (pts + (xy 204.47 232.41) + (xy 204.47 229.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "321e26f0-3e2b-5a6c-aa00-b1ec54f89ea9") + ) + (label "+3V3" + (at 204.47 229.87 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "1a989f05-b428-5cc5-8896-f1a1ca64d1a1") + ) + (wire + (pts + (xy 204.47 240.03) + (xy 204.47 242.57) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a00042af-0699-5024-b73f-f38a98cb6e9a") + ) + (label "DRV_EN" + (at 204.47 242.57 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "442c66bd-fc99-5e45-b0f0-d3d44653ff00") + ) + (wire + (pts + (xy 440.69 41.91) + (xy 440.69 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4f351d8d-1123-51bd-8a9e-12b9ecac6b39") + ) + (label "+3V3" + (at 440.69 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "4b9e2676-8a61-573d-a102-d7042e393cad") + ) + (wire + (pts + (xy 440.69 49.53) + (xy 440.69 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "50ad5744-53ea-5761-b838-44f9c529570e") + ) + (label "HOME_RAW" + (at 440.69 52.07 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c7e3d129-5d58-514e-b2c4-4e85c7c4198e") + ) + (wire + (pts + (xy 452.12 41.91) + (xy 452.12 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fe49d9c1-3d69-5358-b2b3-ecb3a3e31a20") + ) + (label "HOME_RAW" + (at 452.12 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "19422f10-de59-557a-af61-9777f5e07023") + ) + (wire + (pts + (xy 452.12 49.53) + (xy 452.12 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "629519ea-aacc-5af5-b57a-1b54f4e8c97d") + ) + (label "HOME" + (at 452.12 52.07 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5e521f6b-f9e3-5865-96c8-18d6b61d2548") + ) + (wire + (pts + (xy 537.21 41.91) + (xy 537.21 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1e0cb122-0cf7-5a58-b31f-4dfb713ac5d2") + ) + (label "+3V3" + (at 537.21 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "0c49b0ad-347b-5881-9561-3bfeb2fd055a") + ) + (wire + (pts + (xy 537.21 49.53) + (xy 537.21 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "22125998-799f-5e51-8ac3-aaab46aae9c7") + ) + (label "HALL_RAW" + (at 537.21 52.07 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "817e15f9-8935-5323-af3c-eb24bedadb44") + ) + (wire + (pts + (xy 549.91 41.91) + (xy 549.91 39.37) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9798b348-b50b-563f-abd4-1003653fbfaa") + ) + (label "HALL_RAW" + (at 549.91 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ede7e20f-5eab-5773-9b00-7125ee62f968") + ) + (wire + (pts + (xy 549.91 49.53) + (xy 549.91 52.07) + ) + (stroke + (width 0) + (type default) + ) + (uuid "32380687-7175-5455-b304-c885c4bde3fe") + ) + (label "HALL" + (at 549.91 52.07 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c8e7c70c-5329-53f0-9add-b6745bf64979") + ) + (wire + (pts + (xy 518.16 80.01) + (xy 518.16 77.47) + ) + (stroke + (width 0) + (type default) + ) + (uuid "91bdea53-933c-5c00-ac93-1c42edb9a654") + ) + (label "LED_BUF" + (at 518.16 77.47 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "89ff091b-5246-5dd9-a982-a4956f71e746") + ) + (wire + (pts + (xy 518.16 87.63) + (xy 518.16 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "983c1a76-54d5-58bc-8e8c-67b41320108e") + ) + (label "LED_DOUT" + (at 518.16 90.17 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "ec56b73a-2d9c-5a9b-885c-9beeeca76b90") + ) + (wire + (pts + (xy 215.9 231.14) + (xy 215.9 228.6) + ) + (stroke + (width 0) + (type default) + ) + (uuid "31fd1d8a-acde-5630-ad0a-f13f8a4e7506") + ) + (label "+3V3" + (at 215.9 228.6 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "470c8327-3e2d-508b-85fd-04d4864f5dcc") + ) + (wire + (pts + (xy 215.9 238.76) + (xy 215.9 241.3) + ) + (stroke + (width 0) + (type default) + ) + (uuid "716321f7-fcf6-5cc5-baed-9cbfb6b5ff5d") + ) + (label "PWR_A" + (at 215.9 241.3 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "c37f1e08-c9f1-53b6-8ca1-64c7d42fd59f") + ) + (wire + (pts + (xy 262.89 232.41) + (xy 262.89 229.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ebb9e4d5-aa71-5768-9703-d29451ebb9a4") + ) + (label "STAT" + (at 262.89 229.87 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "311bb91f-04a7-58e9-8c6b-36d284443282") + ) + (wire + (pts + (xy 262.89 240.03) + (xy 262.89 242.57) + ) + (stroke + (width 0) + (type default) + ) + (uuid "229869ca-f17c-5a1f-bd1b-ed2742c2505e") + ) + (label "STAT_A" + (at 262.89 242.57 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "db2b23a6-2329-5785-b2b2-8fa63437c7d8") + ) + (wire + (pts + (xy 87.63 288.29) + (xy 87.63 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "69e1c32e-0b3a-5cca-abef-1a593afd6c5d") + ) + (label "+12V" + (at 87.63 285.75 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "e0264616-970f-5baf-8fab-f40aa81c6119") + ) + (wire + (pts + (xy 87.63 295.91) + (xy 87.63 298.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fc745d6c-fd0c-50ed-9acc-cc56611390f9") + ) + (label "GND" + (at 87.63 298.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "e8598963-a0e9-5304-9827-4ee22dfeb557") + ) + (wire + (pts + (xy 193.04 288.29) + (xy 193.04 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a8de1d28-2c4f-5310-b9af-8409d727e17b") + ) + (label "+12V" + (at 193.04 285.75 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f705672c-c8eb-5436-a13a-65a0c8be55ff") + ) + (wire + (pts + (xy 193.04 295.91) + (xy 193.04 298.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "90ce2de9-db89-5602-acb4-8d13179e7003") + ) + (label "GND" + (at 193.04 298.45 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "2212c5b2-1dad-5c08-a331-502e85708fac") + ) + (wire + (pts + (xy 52.07 43.18) + (xy 52.07 40.64) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4e279b8f-7977-50eb-93d0-f8ae4bc24a53") + ) + (label "VIN_RAW" + (at 52.07 40.64 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "377d6d56-6ba1-5896-871c-4cd1dfa07f68") + ) + (wire + (pts + (xy 52.07 50.8) + (xy 52.07 53.34) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ca6e2c84-fd21-5878-863a-521542cdba62") + ) + (label "VIN_FUSED" + (at 52.07 53.34 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "5f094065-5ee7-55a9-9e8e-e5bd326c7441") + ) + (wire + (pts + (xy 71.12 135.89) + (xy 68.58 135.89) + ) + (stroke + (width 0) + (type default) + ) + (uuid "77b6bc80-71d5-51f4-993b-c0a692d3a5f9") + ) + (label "USB_DP" + (at 68.58 135.89 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "3adfb3d4-6bd5-5e43-9434-55b509d41035") + ) + (wire + (pts + (xy 71.12 138.43) + (xy 68.58 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "62fca601-1818-53c2-a32c-81e79344ac9f") + ) + (label "USB_DM" + (at 68.58 138.43 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "4c189cfc-64c9-5c8d-9ee0-948db05a590b") + ) + (wire + (pts + (xy 76.2 130.81) + (xy 76.2 128.27) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0fc46bbb-74fd-514f-819b-af7c4b9e2848") + ) + (label "VBUS" + (at 76.2 128.27 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "740e28dd-636e-59ea-bf42-845b682fc2f2") + ) + (wire + (pts + (xy 76.2 143.51) + (xy 76.2 146.05) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0ed79d8a-0191-507f-be61-a173edd67657") + ) + (label "GND" + (at 76.2 146.05 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "bb5c778c-a9aa-5255-a628-2902f98b3381") + ) + (wire + (pts + (xy 81.28 135.89) + (xy 83.82 135.89) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c06a4376-c44a-5ba6-ab81-daa7eba2d855") + ) + (label "USB_DP" + (at 83.82 135.89 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "31fd243c-63f1-570c-a532-978f7cf26b18") + ) + (wire + (pts + (xy 81.28 138.43) + (xy 83.82 138.43) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6cc9a774-6cfd-5ab4-92a1-bdc8d20cb086") + ) + (label "USB_DM" + (at 83.82 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "ae39ce2b-9a6a-5160-9148-c8c9e23028c6") + ) + (wire + (pts + (xy 483.87 34.29) + (xy 481.33 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "96510f67-982c-56ed-9f78-5598b20d3591") + ) + (label "+3V3" + (at 481.33 34.29 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "6f2cccbb-e1db-5abb-83c7-81e4539ed666") + ) + (wire + (pts + (xy 491.49 34.29) + (xy 494.03 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9632b461-22ec-5740-83e2-87f9ec67e9ec") + ) + (label "HOME" + (at 494.03 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "2e7fb6fd-0a8a-5038-bdad-6d0be944778b") + ) + (wire + (pts + (xy 417.83 72.39) + (xy 415.29 72.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3345ce33-4fb6-55ab-959b-b8807f9c9d4a") + ) + (label "+3V3" + (at 415.29 72.39 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "018517fe-2922-5ea3-8ec2-08407bd40d2b") + ) + (wire + (pts + (xy 425.45 72.39) + (xy 427.99 72.39) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3cb2637a-f852-54af-a854-65b39136f70b") + ) + (label "HALL" + (at 427.99 72.39 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "06b5027e-8d53-5d52-862b-11a996a79b9d") + ) + (wire + (pts + (xy 238.76 285.75) + (xy 236.22 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "505ae5d3-0a72-55c7-be5e-b4a1c92b8e1d") + ) + (label "+3V3" + (at 236.22 285.75 180) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "0d472afb-7757-50a4-b2a9-353a9a9a817f") + ) + (wire + (pts + (xy 246.38 285.75) + (xy 248.92 285.75) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4a78a423-1536-54bd-ac3d-ec274c418f8d") + ) + (label "DRV_VDD" + (at 248.92 285.75 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + (uuid "f7484e9b-68d3-5eeb-8552-5af936663595") + ) + (wire + (pts + (xy 220.98 35.56) + (xy 220.98 38.1) + ) + (stroke + (width 0) + (type default) + ) + (uuid "346aa1c0-3782-5077-ae67-22b51d218df3") + ) + (label "GND" + (at 220.98 38.1 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "29397f01-4d7d-524c-a876-8e2740eb8f2c") + ) + (wire + (pts + (xy 232.41 35.56) + (xy 232.41 38.1) + ) + (stroke + (width 0) + (type default) + ) + (uuid "665d43e8-1b8d-5575-8031-b262366e9f05") + ) + (label "+12V" + (at 232.41 38.1 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "b2fb7642-7390-59da-ad80-2d16ba3e127d") + ) + (wire + (pts + (xy 245.11 35.56) + (xy 245.11 38.1) + ) + (stroke + (width 0) + (type default) + ) + (uuid "608cd481-a594-5875-985c-e2cbeadd05a3") + ) + (label "+5V" + (at 245.11 38.1 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "fb233ecf-4a1c-52b7-981c-b89e4db50185") + ) + (wire + (pts + (xy 154.94 186.69) + (xy 154.94 189.23) + ) + (stroke + (width 0) + (type default) + ) + (uuid "40d5c5a3-2fdd-5233-9acb-f3be8f9992d7") + ) + (label "VBUS" + (at 154.94 189.23 270) + (effects + (font + (size 1.27 1.27) + ) + (justify right bottom) + ) + (uuid "9eeeae68-adfa-5fbb-a912-c3f786f20a23") + ) + (symbol + (lib_id "RF_Module:ESP32-WROOM-32E") + (at 229.87 168.91 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "7cd83c1e-c6b7-5a66-a779-e12a7ddc11b2") + (property "Reference" "U1" + (at 229.87 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "ESP32-WROOM-32E-N8" + (at 229.87 207.01 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "RF_Module:ESP32-WROOM-32E" + (at 229.87 168.91 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf" + (at 229.87 168.91 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Wi-Fi MCU module (FluidNC)" + (at 229.87 168.91 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "3" + (uuid "cabe3c67-d181-51c8-a579-4da634f0f1f5") + ) + (pin "4" + (uuid "b1447704-72fc-5aab-bd21-f68f9562d94b") + ) + (pin "5" + (uuid "0ab6f5b4-2035-5686-9c42-ed41182eac21") + ) + (pin "21" + (uuid "946a453a-b6c3-5061-bb19-00469b524246") + ) + (pin "22" + (uuid "167815fe-f9df-50d4-8e3c-a374efdbd21a") + ) + (pin "17" + (uuid "a47deb95-db3d-5ec6-bb9f-d0f83773313b") + ) + (pin "18" + (uuid "6dc1a6b2-2fdd-5e33-8faa-a0ba9c4ad741") + ) + (pin "20" + (uuid "d0bee719-02b7-5c9c-94d3-4972a1f3d69b") + ) + (pin "19" + (uuid "7260d7e6-fce9-5743-91a1-60ec933c7e84") + ) + (pin "32" + (uuid "852d12f1-e491-58a3-8feb-6ae3e915923b") + ) + (pin "2" + (uuid "1e793e77-2821-54cf-9fbe-8f43fe821f08") + ) + (pin "1" + (uuid "986efff7-8612-5b5e-9017-a0c9a0c016c3") + ) + (pin "15" + (uuid "6a6fb2f0-b6c6-5dfb-adc5-00a716c335db") + ) + (pin "38" + (uuid "025fa6fa-0920-53b9-af8d-6e4f5972dea6") + ) + (pin "39" + (uuid "55b7d457-56c2-52aa-96ee-955f8750055b") + ) + (pin "25" + (uuid "e40a22d9-2837-5844-a0a7-457afed941cd") + ) + (pin "35" + (uuid "ccacf902-c81f-50c6-8339-9c6d817af579") + ) + (pin "24" + (uuid "42bb411b-fa66-5d58-a5b5-8250fffa1c27") + ) + (pin "34" + (uuid "68e06555-1aea-5524-8f36-4a27549f054f") + ) + (pin "26" + (uuid "dc6f247e-c246-56e3-b7a5-e09be6c27cc3") + ) + (pin "29" + (uuid "bda3dcda-b316-52f0-bff0-fdd1bf682df3") + ) + (pin "14" + (uuid "ff8cc8dc-6f35-5870-bfd3-eac970687e20") + ) + (pin "16" + (uuid "2ae524b7-bfae-5834-b4a6-217aaa5c2da0") + ) + (pin "13" + (uuid "700c81f1-868b-554f-8f29-966daa753234") + ) + (pin "23" + (uuid "94ed6796-d535-52f9-a9dc-295d464f7e5b") + ) + (pin "27" + (uuid "253e13d1-ac58-5243-9ce1-6506b6986278") + ) + (pin "28" + (uuid "888c4af7-d4e9-5d63-ae7a-f5690c37e814") + ) + (pin "30" + (uuid "ae382182-1dc5-5f9d-bba5-ac17380a23bd") + ) + (pin "31" + (uuid "4c9d9a58-1f81-58c2-ab0a-1584599ab6c4") + ) + (pin "33" + (uuid "e5630f32-fa2c-53fe-aff7-600aa9a48469") + ) + (pin "36" + (uuid "8a2ca766-2b4d-5907-b423-78037a6ba383") + ) + (pin "37" + (uuid "2c4bdae4-17bd-5aed-8daf-d07d0d7a4cc4") + ) + (pin "10" + (uuid "fc2259c6-7348-5ed7-8ffb-637c3ab374f5") + ) + (pin "11" + (uuid "cd883a39-b5b5-517b-a1f8-76c547940e74") + ) + (pin "12" + (uuid "65bae65b-cfbe-5c0c-86f0-4ebef153c541") + ) + (pin "8" + (uuid "537aa53b-32ba-5387-8f77-599ec89eeafa") + ) + (pin "9" + (uuid "58c5805b-d36c-51f5-9546-89e2c3f5d037") + ) + (pin "6" + (uuid "a2d47086-bfc5-50b9-adee-23be10d02f23") + ) + (pin "7" + (uuid "786e5c4e-5661-5a22-842f-6b8385f3566f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "SandTable:CH340C_3V3") + (at 36.83 205.74 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "ae46ffd7-7a16-5ced-a31e-415062575590") + (property "Reference" "U2" + (at 36.83 189.23 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "CH340C" + (at 36.83 223.52 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" + (at 36.83 205.74 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://datasheet.lcsc.com/szlcsc/Jiangsu-Qin-Heng-CH340C_C84681.pdf" + (at 36.83 205.74 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB-UART bridge" + (at 36.83 205.74 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C84681" + (at 36.83 205.74 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "15" + (uuid "f01a25ae-0845-5a46-b2d7-fc96e83209c0") + ) + (pin "5" + (uuid "7e1be3d4-03a1-5612-b475-75150c53d24d") + ) + (pin "6" + (uuid "e408b622-ee02-5a50-91f0-b2f5a0d31ac0") + ) + (pin "7" + (uuid "29b5aaa6-fc56-545b-b2cc-0a555dd37ebc") + ) + (pin "8" + (uuid "d48dac1e-0991-577d-a52a-21ea9304e459") + ) + (pin "16" + (uuid "e0c919e8-c485-5184-86b5-e14657e0cb85") + ) + (pin "4" + (uuid "2ae80079-886b-56a7-8614-73c978dd78a7") + ) + (pin "1" + (uuid "3454e0d4-9678-5fb0-8535-e1f1fab57bc0") + ) + (pin "2" + (uuid "4f732dc3-bcaf-5405-9dd2-ddadf4b01f5f") + ) + (pin "3" + (uuid "81b79c2f-b60c-597a-8ac4-54b28a021d2e") + ) + (pin "9" + (uuid "97fb6747-ae81-5789-b211-10b6d5b73c0e") + ) + (pin "10" + (uuid "61ab5fce-a4bb-5931-8e7c-58ccfbf7a174") + ) + (pin "11" + (uuid "70e387e8-7b72-5973-96c7-5081c9f1491e") + ) + (pin "12" + (uuid "c356325a-ea23-5d58-91f7-813b01ca2b40") + ) + (pin "13" + (uuid "3e89890d-6247-5133-b4b9-bbf0d60d7861") + ) + (pin "14" + (uuid "655319e4-1163-5491-a2ed-6c4db52c57ca") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Regulator_Linear:AP7361C-33E") + (at 313.69 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d4a02e29-917d-50de-86ba-f0a34c73b816") + (property "Reference" "U3" + (at 313.69 31.115 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "AP7361C-33E" + (at 313.69 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-223-3_TabPin2" + (at 313.69 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.diodes.com/assets/Datasheets/AP7361C.pdf" + (at 313.69 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "5V -> 3.3V LDO, 0.36 V dropout at 1 A (pin 1 IN, 2 GND/tab, 3 OUT)" + (at 313.69 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "6e1e66c7-1c84-5f55-9f24-d66533015430") + ) + (pin "2" + (uuid "ac737c99-ff5b-53a1-80a9-2ae637da1c4b") + ) + (pin "3" + (uuid "267d2553-8474-51c9-bcc2-fa0cafc96d93") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "74xGxx:74AHCT1G125") + (at 468.63 90.17 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "f710d186-b3dd-51fc-8a27-8c527bde241d") + (property "Reference" "U4" + (at 468.63 78.74 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "74AHCT1G125" + (at 468.63 102.87 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23-5" + (at 468.63 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "http://www.ti.com/lit/sg/scyt129e/scyt129e.pdf" + (at 468.63 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "3.3V -> 5V LED data buffer" + (at 468.63 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "2" + (uuid "9f47381b-f3d9-51d5-9b68-fe36cd251921") + ) + (pin "5" + (uuid "abb5c9af-6578-5f82-8870-dc32201689cf") + ) + (pin "3" + (uuid "c78b2a30-a6d2-5063-a9c3-d28d4f5de703") + ) + (pin "1" + (uuid "2e90709a-4520-55f8-ac91-b55c134b3a98") + ) + (pin "4" + (uuid "13d88b4b-8c7a-5f25-96c3-ff2484842d01") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Converter_DCDC:R-78E5.0-1.0") + (at 139.7 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "eca5d989-b3a9-5315-923f-dbc7574ff14d") + (property "Reference" "PS1" + (at 139.7 31.115 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "R-78E5.0-1.0" + (at 139.7 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT" + (at 139.7 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.recom-power.com/pdf/Innoline/R-78Exx-1.0.pdf" + (at 139.7 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "12V -> 5V 1A switching regulator" + (at 139.7 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "9687cc53-ada8-5ac1-9663-41ba5dc4490f") + ) + (pin "2" + (uuid "16435941-5739-5d20-94c0-a74ad194c331") + ) + (pin "3" + (uuid "14f35e33-e7d4-53f4-b7f0-355d3b71d3c1") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "PS1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "SandTable:DRV8825_StepStick") + (at 38.1 309.88 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b3bed31e-4ebe-57b0-8327-9f8ac130ab57") + (property "Reference" "A1" + (at 38.1 290.83 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "DRV8825 StepStick (theta/spin)" + (at 38.1 332.74 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Module:Pololu_Breakout-16_15.2x20.3mm" + (at 38.1 309.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.pololu.com/product/2980/pictures" + (at 38.1 309.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Stepper driver socket (DRV8825, 1/32 step)" + (at 38.1 309.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "13" + (uuid "9749eef7-e228-53af-ad97-fd6448c0a211") + ) + (pin "14" + (uuid "b917ff62-3eb6-549e-8a87-6813160331e2") + ) + (pin "9" + (uuid "ca13293c-9c30-5653-9a58-060488617ac1") + ) + (pin "15" + (uuid "dc2d7c7c-79d3-5bb9-a36d-8ba9445132ef") + ) + (pin "16" + (uuid "4705f9e1-6925-5e5e-bd93-0e0aa65bcf2c") + ) + (pin "10" + (uuid "fbcb2886-3f97-56a9-a8a4-78c7a61d9f52") + ) + (pin "11" + (uuid "21e2a2ce-37ae-5b70-9cab-a66e09edd86c") + ) + (pin "12" + (uuid "05fe6516-df46-5bde-aa07-8f94b35fa528") + ) + (pin "2" + (uuid "8c6df489-2a97-5433-a22a-3086bf0dfcf1") + ) + (pin "1" + (uuid "e0d3db31-07ad-5d4f-b87c-383330c55dae") + ) + (pin "8" + (uuid "f2cf655d-726e-5227-9b44-25eba2ae28ad") + ) + (pin "7" + (uuid "ab37733f-bafe-5c10-8d92-f5567ba15612") + ) + (pin "3" + (uuid "63bea262-029d-522a-a34d-cb8e96036122") + ) + (pin "4" + (uuid "085ac050-38bf-583e-bb52-6664b0bdb0a6") + ) + (pin "5" + (uuid "1c0bb395-c62b-5f2b-a067-623d9cee81e1") + ) + (pin "6" + (uuid "31293618-8885-5814-80c0-e090190461ae") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "A1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "SandTable:DRV8825_StepStick") + (at 143.51 309.88 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "1a7133b1-be90-5e2d-be8e-8b3325c622d3") + (property "Reference" "A2" + (at 143.51 290.83 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "DRV8825 StepStick (rho/arm)" + (at 143.51 332.74 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Module:Pololu_Breakout-16_15.2x20.3mm" + (at 143.51 309.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.pololu.com/product/2980/pictures" + (at 143.51 309.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Stepper driver socket (DRV8825, 1/32 step)" + (at 143.51 309.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "13" + (uuid "459de983-671a-546a-a171-8ed1b8e3f817") + ) + (pin "14" + (uuid "02159e15-3d10-5644-86d7-4de1f94d3196") + ) + (pin "9" + (uuid "c048a47d-0c41-5bf3-9e02-25d9e1f24e03") + ) + (pin "15" + (uuid "82538135-be8d-5daf-93d3-c36475af0896") + ) + (pin "16" + (uuid "d9ffa625-daef-5a85-a7c1-d1810ea95424") + ) + (pin "10" + (uuid "ce87ea06-9d69-565d-8e2c-b192d3eb2f82") + ) + (pin "11" + (uuid "3b9358c8-363a-5118-ad28-7df1e924213d") + ) + (pin "12" + (uuid "6bdd121c-a48d-5ae7-bf84-81fb639ef5ad") + ) + (pin "2" + (uuid "a03e84df-f194-5e83-90f6-db56d00f722f") + ) + (pin "1" + (uuid "9389c34c-cef4-5085-b8a3-4da79342cca3") + ) + (pin "8" + (uuid "c3159713-fdeb-569e-9783-c387a6e6208b") + ) + (pin "7" + (uuid "f30eee3b-ee9f-54d7-8eeb-429ba1e1423e") + ) + (pin "3" + (uuid "fbc426d0-5d4f-5398-b862-b9f772ffc45f") + ) + (pin "4" + (uuid "2d6410b1-8d2e-564f-98ac-8aea1611d69d") + ) + (pin "5" + (uuid "f557a0b1-6ec4-5d68-8952-23fcbb84ab1b") + ) + (pin "6" + (uuid "04247b47-e99a-5e9b-b0a3-992e5abe0cf8") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "A2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Barrel_Jack") + (at 22.86 36.83 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "ed0ad194-4212-580e-b303-3998de02f3c1") + (property "Reference" "J1" + (at 22.86 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "12V DC 5.5x2.1" + (at 22.86 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal" + (at 22.86 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 22.86 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Power input" + (at 22.86 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "4791b8f3-8dce-56ae-af56-d8b90ddf2724") + ) + (pin "2" + (uuid "ccc77471-22f3-5d06-90b3-6a9bbd23cb39") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:USB_C_Receptacle_USB2.0_16P") + (at 27.94 142.24 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8d1310f0-9128-5564-a14a-afbf40a99a6e") + (property "Reference" "J2" + (at 27.94 123.19 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "USB-C" + (at 27.94 167.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12" + (at 27.94 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.usb.org/sites/default/files/documents/usb_type-c.zip" + (at 27.94 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Programming / serial" + (at 27.94 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C165948" + (at 27.94 142.24 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "S1" + (uuid "97f87968-a5a3-559e-8a48-e948ef7bd402") + ) + (pin "A1" + (uuid "0dc3fcb5-bc64-5963-8ba0-62f59baccdaf") + ) + (pin "A12" + (uuid "8c7b7521-bf66-5873-aa3c-1064cd331a1e") + ) + (pin "B1" + (uuid "25852680-82b2-5300-8bcb-474f8117a627") + ) + (pin "B12" + (uuid "8c7dad0c-9479-583d-a56a-6a04ea797c94") + ) + (pin "A4" + (uuid "b7139929-5e83-5cbb-8dc9-ae62e2c1b21d") + ) + (pin "A9" + (uuid "7e63e297-670e-5e22-9e3d-ca18810e24d5") + ) + (pin "B4" + (uuid "8d87b2fe-85fe-5e84-855f-f1e40094be32") + ) + (pin "B9" + (uuid "21409db9-c397-55d6-a612-dc40c27c225a") + ) + (pin "A5" + (uuid "01fab597-41d5-55c3-86fc-50348b18dc86") + ) + (pin "B5" + (uuid "0f78f8c1-641b-5a93-bebc-5c5b12d835fb") + ) + (pin "A7" + (uuid "d86b4da7-9817-5555-bab9-c8efc646b888") + ) + (pin "B7" + (uuid "f194ef98-0462-58a8-b5af-69e904ac5e34") + ) + (pin "A6" + (uuid "f2f4541f-fa83-5227-86d8-a2cbe763808a") + ) + (pin "B6" + (uuid "daa6c49d-a69a-5087-857b-7ec3a1602c93") + ) + (pin "A8" + (uuid "f0038b06-1eef-5136-a58c-763e83c8094c") + ) + (pin "B8" + (uuid "bd89189c-63c1-5065-b472-2d3d897ddf2b") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 111.76 288.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "708cf780-e089-5de2-8c0f-1543c42c32ca") + (property "Reference" "J3" + (at 111.76 283.21 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SPIN MOTOR" + (at 111.76 297.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (at 111.76 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 111.76 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Theta motor (XH-4, matches motor cable)" + (at 111.76 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C158012" + (at 111.76 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "6e9d100d-9e3c-5cb7-8861-95f5c2253485") + ) + (pin "2" + (uuid "63191441-5ab9-5913-92da-77187bcd0a21") + ) + (pin "3" + (uuid "d9ca8db1-e41d-56b5-be15-c5fc4e0dfe45") + ) + (pin "4" + (uuid "446f60f5-d6ac-5c72-ab33-09f49c6b0540") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 217.17 288.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "2b484b55-795c-57ba-9b9a-6be1442a758d") + (property "Reference" "J4" + (at 217.17 283.21 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "ARM MOTOR" + (at 217.17 297.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical" + (at 217.17 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 217.17 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Rho motor via slip ring" + (at 217.17 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C158012" + (at 217.17 288.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "1afce8c9-90de-53b0-8d5a-f8921a2ea6c0") + ) + (pin "2" + (uuid "3aa88ce5-140e-5451-91f5-d8b0cc449660") + ) + (pin "3" + (uuid "8787ddff-9a68-5f38-ac50-fad75fe04759") + ) + (pin "4" + (uuid "0d53714f-5d64-509b-9905-27c1b3962891") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 427.99 36.83 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "27bcc6d4-646d-5537-a603-df25b3cb5e89") + (property "Reference" "J5" + (at 427.99 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "HOME SW" + (at 427.99 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (at 427.99 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 427.99 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Rho home switch (via slip ring)" + (at 427.99 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C144394" + (at 427.99 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "c6574826-039d-5125-b3dc-463a094ef929") + ) + (pin "2" + (uuid "345421dd-63df-5938-b21b-d63611466e8f") + ) + (pin "3" + (uuid "6415fdd8-3273-5749-829f-ba6b0aad85d9") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 524.51 36.83 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "549450fb-f2e4-54be-b663-61640c1ecfed") + (property "Reference" "J6" + (at 524.51 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "HALL" + (at 524.51 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (at 524.51 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 524.51 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Optional theta hall sensor (5V)" + (at 524.51 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C144394" + (at 524.51 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "edcde351-1976-587a-ad58-cd51feb26e9f") + ) + (pin "2" + (uuid "0b7d5604-861f-572b-b469-6c60bbe9b9d2") + ) + (pin "3" + (uuid "d2e5ceec-a918-5bc7-adc4-798d2cca081a") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x03") + (at 546.1 74.93 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "0c6ee88d-6318-51af-a4e4-f4a9504c7a87") + (property "Reference" "J7" + (at 546.1 69.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "LED STRIP" + (at 546.1 81.28 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical" + (at 546.1 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 546.1 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "WS2812B strip (5V, small strips only)" + (at 546.1 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C144394" + (at 546.1 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "8f919a5a-602e-59b6-89da-f871861db46f") + ) + (pin "2" + (uuid "ee0d328a-5eb4-52f3-baf0-af500ddd5bd1") + ) + (pin "3" + (uuid "c848b0c0-6cae-5ddb-a39f-8586559443da") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x04") + (at 427.99 125.73 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "7150e8ae-22e2-5a66-8dc8-eedaf1fca13a") + (property "Reference" "J8" + (at 427.99 120.65 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "EXPANSION" + (at 427.99 134.62 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" + (at 427.99 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 427.99 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "3V3 / IO32 / IO25 / GND" + (at 427.99 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "9f5bb65c-8bfa-599c-9383-b0a6360a7352") + ) + (pin "2" + (uuid "fa830330-8e1a-57bd-932e-ca445ada1d49") + ) + (pin "3" + (uuid "1b917195-2f88-57dc-af74-d33c3fd93da9") + ) + (pin "4" + (uuid "39eeb858-c0c9-5e73-b476-474758f820d9") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "J8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 80.01 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "e6f704cd-1a92-526e-8a4f-3b691b41894f") + (property "Reference" "D1" + (at 80.01 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SS34" + (at 80.01 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SMA" + (at 80.01 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 80.01 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Reverse-polarity protection" + (at 80.01 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C8678" + (at 80.01 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "7fd9f4f8-6b61-5d06-907e-818516b2b9c6") + ) + (pin "2" + (uuid "bd8aff15-5fc1-5c34-bce0-8d0d7ceab320") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 195.58 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d00f60b7-51dd-51c1-bd90-f02a1bdf4114") + (property "Reference" "D2" + (at 195.58 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "SS34" + (at 195.58 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SMA" + (at 195.58 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 195.58 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "5V OR-ing (regulator, 1 A)" + (at 195.58 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C8678" + (at 195.58 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "4fa91f5e-e123-56d7-9a54-8248ca1ffc8e") + ) + (pin "2" + (uuid "6d911c48-3d6f-546e-8868-b1964f742665") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 134.62 125.73 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "dfd2dfe3-ff53-5171-b30b-1664ef15efba") + (property "Reference" "D3" + (at 134.62 123.19 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "B5819W" + (at 134.62 129.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SOD-123" + (at 134.62 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 134.62 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "5V OR-ing (USB)" + (at 134.62 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C8598" + (at 134.62 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "0b346937-ba26-5093-b1b9-3035e0b2bf30") + ) + (pin "2" + (uuid "66faebe4-60c7-53fe-9682-8b278c9440ed") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 240.03 227.33 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d5d115dd-d95a-55f7-b8e6-9d5a871a10c2") + (property "Reference" "D4" + (at 240.03 224.79 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GREEN" + (at 240.03 232.156 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0603_1608Metric" + (at 240.03 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 240.03 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Power LED" + (at 240.03 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C72043" + (at 240.03 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "d08c5489-9253-5db0-81a1-8c295c54ea3b") + ) + (pin "2" + (uuid "46fd2591-a27f-5901-b1d7-cb6c2e3af4fb") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:LED") + (at 287.02 227.33 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b832dc67-ac61-5cff-b5d4-6f2d2cdf6f9a") + (property "Reference" "D5" + (at 287.02 224.79 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BLUE" + (at 287.02 232.156 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "LED_SMD:LED_0603_1608Metric" + (at 287.02 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 287.02 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Status LED (IO2)" + (at 287.02 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C72041" + (at 287.02 227.33 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "f2bb8d72-10ed-5444-9cfe-de6d0a66f438") + ) + (pin "2" + (uuid "2e7c37a1-b003-595b-8fa3-7fbd1672eaf3") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Transistor_BJT:MMBT3904") + (at 90.17 191.77 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "11349a74-c0a9-5c21-82e3-92fca14936f5") + (property "Reference" "Q1" + (at 90.17 185.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MMBT3904" + (at 90.17 199.39 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 90.17 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.onsemi.com/pdf/datasheet/pzt3904-d.pdf" + (at 90.17 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Auto-reset (EN)" + (at 90.17 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C20526" + (at 90.17 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "ac8e15d4-baf8-517c-9287-49ade6d40a25") + ) + (pin "3" + (uuid "98e8f091-f10e-5374-81cd-eba0b9efbef3") + ) + (pin "2" + (uuid "606e90a4-389d-50d4-b20e-58b2ed5b14ed") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "Q1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Transistor_BJT:MMBT3904") + (at 127 191.77 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "226d855a-ed97-50e3-bc21-c9b8747baaf3") + (property "Reference" "Q2" + (at 127 185.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "MMBT3904" + (at 127 199.39 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23" + (at 127 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.onsemi.com/pdf/datasheet/pzt3904-d.pdf" + (at 127 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Auto-reset (IO0)" + (at 127 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C20526" + (at 127 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "573d2681-2db7-5b42-a639-9b3de3ed72fe") + ) + (pin "3" + (uuid "6780f993-7313-5e8a-9905-8677c8f2880d") + ) + (pin "2" + (uuid "a4611e64-92ed-5cb4-b36f-8d293b516f63") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "Q2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Switch:SW_Push") + (at 331.47 127 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "1abe3ec4-5aa3-51bb-b2c6-96932b03128b") + (property "Reference" "SW1" + (at 331.47 122.682 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "RESET" + (at 331.47 130.048 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Button_Switch_SMD:SW_SPST_B3U-1000P" + (at 331.47 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 331.47 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "EN / reset button" + (at 331.47 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C231329" + (at 331.47 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "cd316512-7b3a-5567-aa4d-409e8eb72eab") + ) + (pin "2" + (uuid "d01787f7-3ccd-5475-bb00-72c849443000") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "SW1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Switch:SW_Push") + (at 374.65 127 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "5cf58b67-333f-5e2a-893e-34255fef1ee7") + (property "Reference" "SW2" + (at 374.65 122.682 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BOOT" + (at 374.65 130.048 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Button_Switch_SMD:SW_SPST_B3U-1000P" + (at 374.65 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 374.65 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "IO0 / boot button" + (at 374.65 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C231329" + (at 374.65 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "b45c0bd5-146f-58da-8b20-d490e1235e45") + ) + (pin "2" + (uuid "d77d8198-dc8b-5d8f-b389-b712626f5f68") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "SW2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 73.66 292.1 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "6e1bc80c-cb62-5987-b5d6-eac62ab087e5") + (property "Reference" "C1" + (at 73.66 287.02 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100uF 25V" + (at 73.66 298.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:CP_Elec_8x10" + (at 73.66 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 73.66 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Theta driver VMOT bulk" + (at 73.66 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "92494368-3f0b-5ad2-b4c8-a32a823f4bb7") + ) + (pin "2" + (uuid "68f93c73-4690-50bd-a32e-b4ee48ce8c33") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 179.07 292.1 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "94674d34-a062-5d75-9308-274f6e8ac33e") + (property "Reference" "C2" + (at 179.07 287.02 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100uF 25V" + (at 179.07 298.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:CP_Elec_8x10" + (at 179.07 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 179.07 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Rho driver VMOT bulk" + (at 179.07 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "54cd2476-bd63-51e6-af38-fcc54680ca9d") + ) + (pin "2" + (uuid "f7bf714d-dcfb-5b20-9c51-fbaa2632cd20") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 109.22 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d8c84f00-0c2b-57fe-925d-6813a5c4e8cf") + (property "Reference" "C3" + (at 109.22 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF 25V" + (at 109.22 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1206_3216Metric" + (at 109.22 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 109.22 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "12V input decoupling" + (at 109.22 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C13585" + (at 109.22 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "eb1f3308-37d9-5d98-b2fc-b0643eca7eb2") + ) + (pin "2" + (uuid "c9fa086c-f3c1-5360-ae8b-0d82df3cde23") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 168.91 44.45 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "a962269d-1c75-523f-beb6-0da18c5d2f18") + (property "Reference" "C4" + (at 168.91 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF 16V" + (at 168.91 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1206_3216Metric" + (at 168.91 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 168.91 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Regulator output" + (at 168.91 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C13585" + (at 168.91 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "fb87a9cb-9eda-5fb0-bdb5-2e88f09add42") + ) + (pin "2" + (uuid "68c98fb2-9ded-50c6-8d49-82910138fa82") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 340.36 39.37 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "f5d22db1-0d75-58c3-aa8d-cdfad0b729e2") + (property "Reference" "C5" + (at 340.36 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF" + (at 340.36 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 340.36 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 340.36 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "LDO input" + (at 340.36 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C15850" + (at 340.36 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "bc6d4488-7067-5ff0-bf93-73a0272f9632") + ) + (pin "2" + (uuid "28906dae-6a02-5e15-a079-8ce3bfc18304") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 354.33 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8db23ce3-3324-5a54-995d-c8e3d38448e2") + (property "Reference" "C6" + (at 354.33 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "22uF" + (at 354.33 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 354.33 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 354.33 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "LDO output" + (at 354.33 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C45783" + (at 354.33 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "b5578a33-d98e-5d64-9933-f34a6826b590") + ) + (pin "2" + (uuid "92207856-24bb-5bb9-bf39-26b1d4533b57") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 68.58 191.77 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b44c0a62-31e7-5f22-b0c2-204702902245") + (property "Reference" "C7" + (at 68.58 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 68.58 198.12 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 68.58 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 68.58 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "CH340C decoupling" + (at 68.58 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 68.58 191.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "385addd4-d35a-5c81-a768-31ccfa58d38f") + ) + (pin "2" + (uuid "1191deb5-8dbd-5a7b-8d98-186933965283") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 309.88 130.81 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "18cbfacf-9548-5796-88c0-04204a991c37") + (property "Reference" "C8" + (at 309.88 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1uF" + (at 309.88 137.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 309.88 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 309.88 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "EN reset delay" + (at 309.88 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C15849" + (at 309.88 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "12e659fe-59b6-5314-84d0-b789449570fc") + ) + (pin "2" + (uuid "aee7a620-db46-5c8c-a2b5-7fd031e1759e") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 269.24 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8f9eda86-de49-5f22-8d1d-1eec8a8e48d3") + (property "Reference" "C9" + (at 269.24 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF" + (at 269.24 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" + (at 269.24 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 269.24 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "ESP32 bulk decoupling" + (at 269.24 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C15850" + (at 269.24 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "e3e55320-b1e7-5d30-96e4-c538f4c3c889") + ) + (pin "2" + (uuid "703becb8-df33-50a6-bd45-000b969eef8b") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 283.21 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "eef2da2b-6409-51d5-a615-8a0b429293e3") + (property "Reference" "C10" + (at 283.21 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 283.21 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 283.21 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 283.21 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "ESP32 decoupling" + (at 283.21 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 283.21 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "6f7f9556-9e04-5a3b-9442-94f153fd3c6c") + ) + (pin "2" + (uuid "4c7d6a24-a6fd-50d0-9aae-9e3ecbce203d") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 466.09 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "00db1c8e-91ac-582c-bc84-a655be0745b8") + (property "Reference" "C13" + (at 466.09 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 466.09 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 466.09 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 466.09 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Home switch filter" + (at 466.09 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 466.09 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "4cf07720-5f1b-5650-adac-082bb9e4efb5") + ) + (pin "2" + (uuid "920325ae-0626-553f-98f8-dc5755e087cd") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C13") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 562.61 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "5ebd8202-e921-5da6-b535-685eaf6f1d8e") + (property "Reference" "C14" + (at 562.61 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 562.61 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 562.61 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 562.61 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Hall filter" + (at 562.61 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 562.61 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "bb522899-e6f1-5a5a-bd72-a49e077f809d") + ) + (pin "2" + (uuid "1b2293cf-51c6-5dac-bf9d-71e00faa0c8e") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C14") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 505.46 77.47 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "25fb3a75-18c1-52bc-bf72-56c946150f28") + (property "Reference" "C15" + (at 505.46 72.39 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "100nF" + (at 505.46 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" + (at 505.46 77.47 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 505.46 77.47 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Buffer decoupling" + (at 505.46 77.47 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C14663" + (at 505.46 77.47 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "993b1020-7b5f-508a-bafc-1944d56d719d") + ) + (pin "2" + (uuid "f7ef0c4e-ef2a-5b02-805e-86d83309c29f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C15") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 101.6 130.81 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "a680cbe7-0f52-58fe-8242-a4cefcb892f1") + (property "Reference" "R1" + (at 101.6 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "5.1k" + (at 101.6 137.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 101.6 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 101.6 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB-C CC1 pull-down" + (at 101.6 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C23186" + (at 101.6 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "8bc4f1c6-cfdc-55c3-9092-dbc6481252e9") + ) + (pin "2" + (uuid "b6d94326-1ec6-5b9d-9442-cf29cbd8957d") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 113.03 130.81 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "11b33b9a-df3c-580c-9410-8bcb87c6b59b") + (property "Reference" "R2" + (at 113.03 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "5.1k" + (at 113.03 137.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 113.03 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 113.03 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB-C CC2 pull-down" + (at 113.03 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C23186" + (at 113.03 130.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "36007000-c31d-5b61-b13d-b15e2f6476ea") + ) + (pin "2" + (uuid "8c46f7ab-92cd-5596-8265-64c88a4330d4") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 105.41 190.5 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "361b6a0c-fdf3-5366-a925-bc3597a8da31") + (property "Reference" "R3" + (at 105.41 185.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 105.41 196.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 105.41 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 105.41 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Q1 base" + (at 105.41 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 105.41 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "a2b6528e-9814-57ce-81de-b1266d582262") + ) + (pin "2" + (uuid "c183ebbc-c7d1-507d-a9c1-3e6c010448dd") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 142.24 190.5 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "95f8ea31-0e5c-5e0f-b4ba-423b07f1ac7c") + (property "Reference" "R4" + (at 142.24 185.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 142.24 196.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 142.24 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 142.24 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Q2 base" + (at 142.24 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 142.24 190.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "fef59932-e23d-5b64-bdd3-c6eba397e1b5") + ) + (pin "2" + (uuid "9550b160-d176-532f-abc7-0fcf00d8d1b6") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 295.91 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "f0f4b15c-5bad-5c9c-a667-bcf9f833f827") + (property "Reference" "R5" + (at 295.91 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 295.91 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 295.91 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 295.91 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "EN pull-up" + (at 295.91 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 295.91 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "2bc1541a-5333-5ec1-a34d-5939d47cb4be") + ) + (pin "2" + (uuid "c973c829-86c0-5498-b671-3932cebb9978") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 353.06 132.08 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b767d7de-5928-5314-aed0-83763e967099") + (property "Reference" "R6" + (at 353.06 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 353.06 138.43 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 353.06 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 353.06 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "IO0 pull-up" + (at 353.06 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 353.06 132.08 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "bb30581c-7e0b-521d-935f-03f828710c3d") + ) + (pin "2" + (uuid "5bad61d3-1fbc-51ce-993b-577a6ee7947f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 204.47 236.22 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "87628e3d-d60f-5ba2-90a9-e8571c1cee3f") + (property "Reference" "R8" + (at 204.47 231.14 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 204.47 242.57 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 204.47 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 204.47 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Driver enable pull-up (off at boot)" + (at 204.47 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 204.47 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "610b7817-16e5-572c-8da0-61984da2577a") + ) + (pin "2" + (uuid "d6270984-d514-5a1c-a83b-f151a7201b5a") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 440.69 45.72 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "fdca50db-642f-568f-ac2f-0a3fcf029fb9") + (property "Reference" "R9" + (at 440.69 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 440.69 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 440.69 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 440.69 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Home switch pull-up" + (at 440.69 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 440.69 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "e16c758d-2b44-5ef5-8879-c8515e2a79a3") + ) + (pin "2" + (uuid "e2f0026e-82af-5da0-832f-acc737075d61") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 452.12 45.72 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "02b12c82-22e5-5040-b1cb-4f3d13b2e0a0") + (property "Reference" "R10" + (at 452.12 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 452.12 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 452.12 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 452.12 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Home switch series" + (at 452.12 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C21190" + (at 452.12 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "00f83a74-e323-53ef-a856-056f31c22a36") + ) + (pin "2" + (uuid "bfcc1374-769b-5a02-9e8d-444e24317842") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 537.21 45.72 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "57f73b68-632a-5478-b7a9-f190be911688") + (property "Reference" "R11" + (at 537.21 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10k" + (at 537.21 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 537.21 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 537.21 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Hall pull-up" + (at 537.21 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C25804" + (at 537.21 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "949f64fd-b7f0-5e55-991b-9cd1ecf86a88") + ) + (pin "2" + (uuid "71a65bd7-1574-5dd5-b0cb-24d447f5a2fa") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R11") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 549.91 45.72 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "11806a6c-034b-55ce-9de9-903f7b99340b") + (property "Reference" "R12" + (at 549.91 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 549.91 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 549.91 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 549.91 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Hall series" + (at 549.91 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C21190" + (at 549.91 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "ac6952a1-fa61-51d4-8cb0-6746197c5e1b") + ) + (pin "2" + (uuid "0336c355-ff65-5cb1-ae32-694342df77a7") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R12") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 518.16 83.82 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "46f59bf6-29cd-5c57-95e3-89e686cca6aa") + (property "Reference" "R13" + (at 518.16 78.74 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "330" + (at 518.16 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 518.16 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 518.16 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "LED data series" + (at 518.16 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C23138" + (at 518.16 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "e10d5fd3-5c60-58e7-ac08-a3aa1abf21b8") + ) + (pin "2" + (uuid "117474eb-38bd-5bdb-afa0-a1113c17e514") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R13") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 215.9 234.95 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "ce7d6208-8a8a-5871-96f1-a5eff454d35c") + (property "Reference" "R14" + (at 215.9 229.87 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 215.9 241.3 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 215.9 234.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 215.9 234.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Power LED" + (at 215.9 234.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C21190" + (at 215.9 234.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "ca626d3e-6df4-549c-ac9e-38b21cbb3ae5") + ) + (pin "2" + (uuid "0fd7bf00-fe24-514d-9c57-40d128eab412") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R14") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 262.89 236.22 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "72f891f8-ee6d-51f4-8966-7c74fc42716c") + (property "Reference" "R15" + (at 262.89 231.14 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "1k" + (at 262.89 242.57 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_SMD:R_0603_1608Metric" + (at 262.89 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 262.89 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Status LED" + (at 262.89 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "LCSC" "C21190" + (at 262.89 236.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "a0b42435-ba15-5ead-a0cf-02ee0b8b3906") + ) + (pin "2" + (uuid "1aa29683-6b46-5b08-9aa8-81fbc8ad7f7f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "R15") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 87.63 292.1 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d6e7af3b-8b93-532c-84b6-23547c0607c6") + (property "Reference" "C16" + (at 87.63 287.02 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF 50V" + (at 87.63 298.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1206_3216Metric" + (at 87.63 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 87.63 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Theta driver VMOT ceramic, at the socket pins" + (at 87.63 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "f136f8f0-c718-5f99-a99e-9cc45cd52689") + ) + (pin "2" + (uuid "3fc08a22-ad61-5458-bbc7-233083fef042") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C16") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 193.04 292.1 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "50f337b3-2ce0-544e-9e89-0cd24dd4570d") + (property "Reference" "C17" + (at 193.04 287.02 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "10uF 50V" + (at 193.04 298.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Capacitor_SMD:C_1206_3216Metric" + (at 193.04 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 193.04 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Rho driver VMOT ceramic, at the socket pins" + (at 193.04 292.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "50342a4d-f869-5adc-aef6-28149d6fbd2a") + ) + (pin "2" + (uuid "da358880-643d-5bd0-89f5-6c1c3da399a8") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "C17") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:Polyfuse") + (at 52.07 46.99 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "cfb237ae-57a5-5f9c-b4c9-2a9692ece986") + (property "Reference" "F1" + (at 52.07 41.91 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "2.5A PTC" + (at 52.07 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Fuse:Fuse_1812_4532Metric" + (at 52.07 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 52.07 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "12V input resettable fuse" + (at 52.07 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "7331b651-0434-5970-a5a0-ada5334c7868") + ) + (pin "2" + (uuid "51454492-e146-5058-9ec3-0698e9676058") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "F1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Power_Protection:USBLC6-2SC6") + (at 76.2 135.89 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "63463f95-bc81-5b80-9847-846553ad8cf2") + (property "Reference" "U5" + (at 76.2 129.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "USBLC6-2SC6" + (at 76.2 146.05 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Package_TO_SOT_SMD:SOT-23-6" + (at 76.2 135.89 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "https://www.st.com/resource/en/datasheet/usblc6-2.pdf" + (at 76.2 135.89 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB data ESD protection" + (at 76.2 135.89 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "43793929-e12c-5844-b145-df5537ff8d28") + ) + (pin "3" + (uuid "b18ad54f-5159-5474-920a-a99d5f483086") + ) + (pin "5" + (uuid "211f160b-b37e-5ff6-856d-e2966b22ac81") + ) + (pin "2" + (uuid "c881b369-a077-5ce6-bc88-cbc513a41a93") + ) + (pin "6" + (uuid "2f951556-260d-59bd-9d8f-2d36b28958b5") + ) + (pin "4" + (uuid "2d2b2531-1ef2-5a75-a8a0-c895386a7171") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "U5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 487.68 34.29 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "1411384d-6125-5ba2-8940-ab8b86bbcd02") + (property "Reference" "D6" + (at 487.68 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BAT54WS" + (at 487.68 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SOD-323" + (at 487.68 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 487.68 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Home input clamp to 3.3V (5V-safe)" + (at 487.68 34.29 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "457103d2-45c6-5dd4-95d0-d5f24d793841") + ) + (pin "2" + (uuid "31f872d5-9c45-5bb7-b8c9-c9d147409ac3") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D_Schottky") + (at 421.64 72.39 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "a9befe6a-5f6b-504a-aee1-fb17cf6894f4") + (property "Reference" "D7" + (at 421.64 69.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "BAT54WS" + (at 421.64 76.2 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Diode_SMD:D_SOD-323" + (at 421.64 72.39 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 421.64 72.39 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Hall input clamp to 3.3V (5V-safe)" + (at 421.64 72.39 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "64578475-c024-52cd-acf7-8ec1201ffa26") + ) + (pin "2" + (uuid "7a7b49b4-fb0d-5f0b-a5ed-be1257c1187f") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "D7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Jumper:SolderJumper_2_Open") + (at 242.57 285.75 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "ef559780-d426-5a77-9b5b-eaf0cb48c92e") + (property "Reference" "JP1" + (at 242.57 283.464 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "A4988" + (at 242.57 289.306 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm" + (at 242.57 285.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 242.57 285.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Driver pin 2 to 3.3V: bridge only for A4988 (VDD); leave open for DRV8825 (FAULT)" + (at 242.57 285.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "65596c4c-f894-5fb0-a3b5-09eaade0f7bf") + ) + (pin "2" + (uuid "82d80ec2-74b0-5347-b8eb-dcad61342399") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "JP1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Mechanical:MountingHole") + (at 412.75 260.35 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "a55fb8bf-893f-5507-b859-4affb8349791") + (property "Reference" "H1" + (at 412.75 257.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "M3" + (at 412.75 264.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "MountingHole:MountingHole_3.2mm_M3" + (at 412.75 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 412.75 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Uno hole" + (at 412.75 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "H1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Mechanical:MountingHole") + (at 425.45 260.35 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "036a4b56-52b2-5771-b3c6-5223c9161179") + (property "Reference" "H2" + (at 425.45 257.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "M3" + (at 425.45 264.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "MountingHole:MountingHole_3.2mm_M3" + (at 425.45 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 425.45 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Uno hole" + (at 425.45 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "H2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Mechanical:MountingHole") + (at 438.15 260.35 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "c9f982e9-5ced-5e2b-8969-2804505c7ee4") + (property "Reference" "H3" + (at 438.15 257.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "M3" + (at 438.15 264.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "MountingHole:MountingHole_3.2mm_M3" + (at 438.15 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 438.15 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Uno hole" + (at 438.15 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "H3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Mechanical:MountingHole") + (at 450.85 260.35 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board yes) + (dnp no) + (uuid "459d15f8-4315-546a-9288-98ab8f88b4b8") + (property "Reference" "H4" + (at 450.85 257.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "M3" + (at 450.85 264.16 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "MountingHole:MountingHole_3.2mm_M3" + (at 450.85 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 450.85 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Uno hole" + (at 450.85 260.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "H4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 220.98 35.56 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board no) + (dnp no) + (uuid "481eaacd-bd92-5b9a-9a16-2d44a811b4d4") + (property "Reference" "#FLG1" + (at 220.98 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 220.98 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 220.98 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 220.98 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 220.98 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "bdfae0fa-4494-58df-9e40-34bf827c791d") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "#FLG1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 232.41 35.56 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board no) + (dnp no) + (uuid "072ff662-0ab2-5367-9546-5902ab84d8dd") + (property "Reference" "#FLG2" + (at 232.41 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 232.41 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 232.41 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 232.41 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 232.41 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "d0936e5d-9634-5140-a262-b0d58e375d56") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "#FLG2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 245.11 35.56 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board no) + (dnp no) + (uuid "1964d4af-e178-5b52-b1e1-04e7c28d37c1") + (property "Reference" "#FLG3" + (at 245.11 31.75 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 245.11 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 245.11 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 245.11 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 245.11 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "12a45132-16b7-5d4a-89b8-eb628d74266c") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "#FLG3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:PWR_FLAG") + (at 154.94 186.69 0) + (unit 1) + (exclude_from_sim no) + (in_bom no) + (on_board no) + (dnp no) + (uuid "25446dc6-7154-5a18-981a-6ec09f8f88f1") + (property "Reference" "#FLG4" + (at 154.94 182.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "PWR_FLAG" + (at 154.94 189.23 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 154.94 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 154.94 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 154.94 186.69 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "62b62b53-fe98-5c3a-83c8-985fa11976e9") + ) + (instances + (project "sandtable-controller" + (path "/d585c3d2-c803-5c74-8a05-da481956c6b2" + (reference "#FLG4") + (unit 1) + ) + ) + ) + ) + (sheet_instances + (path "/" + (page "1") + ) + ) + (embedded_fonts no) +) diff --git a/pcb/kicad/sandtable.kicad_sym b/pcb/kicad/sandtable.kicad_sym new file mode 100644 index 0000000..a7ca0e7 --- /dev/null +++ b/pcb/kicad/sandtable.kicad_sym @@ -0,0 +1,753 @@ +(kicad_symbol_lib + (version 20241209) + (generator "sandtable-gen") + (generator_version "9.0") + (symbol "CH340C_3V3" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at -5.08 13.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "CH340C" + (at 1.27 13.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Package_SO:SOIC-16_3.9x9.9mm_P1.27mm" + (at -18.542 30.226 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://datasheet.lcsc.com/szlcsc/Jiangsu-Qin-Heng-CH340C_C84681.pdf" + (at -6.604 33.274 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "USB serial converter, crystal-less, UART, SOIC-16" + (at -1.524 36.068 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "USB UART Serial Converter Interface" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "SOIC*3.9x9.9mm*P1.27mm*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "CH340C_3V3_0_1" + (rectangle + (start -7.62 12.7) + (end 7.62 -12.7) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "CH340C_3V3_1_1" + (pin input line + (at -10.16 7.62 0) + (length 2.54) + (name "R232" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 2.54 0) + (length 2.54) + (name "UD+" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin bidirectional line + (at -10.16 0 0) + (length 2.54) + (name "UD-" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -7.62 -5.08 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin no_connect line + (at -7.62 -7.62 0) + (length 2.54) + (hide yes) + (name "NC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at -2.54 15.24 270) + (length 2.54) + (name "VCC" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 15.24 270) + (length 2.54) + (name "V3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -15.24 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 10.16 180) + (length 2.54) + (name "TXD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 7.62 180) + (length 2.54) + (name "RXD" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 2.54 180) + (length 2.54) + (name "~{CTS}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 0 180) + (length 2.54) + (name "~{DSR}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 -2.54 180) + (length 2.54) + (name "~{RI}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at 10.16 -5.08 180) + (length 2.54) + (name "~{DCD}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 -7.62 180) + (length 2.54) + (name "~{DTR}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 10.16 -10.16 180) + (length 2.54) + (name "~{RTS}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "DRV8825_StepStick" + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "A" + (at -2.54 19.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Pololu_Breakout_A4988" + (at -2.54 16.51 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Footprint" "Module:Pololu_Breakout-16_15.2x20.3mm" + (at 6.985 -19.05 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + (hide yes) + ) + ) + (property "Datasheet" "https://www.pololu.com/product/2980/pictures" + (at 2.54 -7.62 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Pololu Breakout Board, Stepper Driver A4988" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "Pololu Breakout Board Stepper Driver A4988" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Pololu*Breakout*15.2x20.3mm*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "DRV8825_StepStick_0_1" + (rectangle + (start 10.16 -17.78) + (end -7.62 15.24) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + ) + (symbol "DRV8825_StepStick_1_1" + (pin input line + (at -10.16 10.16 0) + (length 2.54) + (name "~{RST}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "13" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 7.62 0) + (length 2.54) + (name "~{SLP}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "14" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 2.54 0) + (length 2.54) + (name "~{EN}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "9" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 0 0) + (length 2.54) + (name "STEP" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "15" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -2.54 0) + (length 2.54) + (name "DIR" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "16" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -7.62 0) + (length 2.54) + (name "M0" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "10" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -10.16 0) + (length 2.54) + (name "M1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "11" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin input line + (at -10.16 -12.7 0) + (length 2.54) + (name "M2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "12" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 17.78 270) + (length 2.54) + (name "VDD/~{FAULT}" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 0 -20.32 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 5.08 17.78 270) + (length 2.54) + (name "VMOT" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "8" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin power_in line + (at 5.08 -20.32 90) + (length 2.54) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "7" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 2.54 180) + (length 2.54) + (name "A2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "3" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 0 180) + (length 2.54) + (name "A1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "4" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 -2.54 180) + (length 2.54) + (name "B1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "5" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin output line + (at 12.7 -5.08 180) + (length 2.54) + (name "B2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "6" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) +) diff --git a/pcb/kicad/sym-lib-table b/pcb/kicad/sym-lib-table new file mode 100644 index 0000000..142d0b3 --- /dev/null +++ b/pcb/kicad/sym-lib-table @@ -0,0 +1,19 @@ +(sym_lib_table + (version 7) + (lib (name "SandTable")(type "KiCad")(uri "${KIPRJMOD}/sandtable.kicad_sym")(options "")(descr "SandTable custom symbols")) + (lib (name "74xGxx")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/74xGxx.kicad_sym")(options "")(descr "")) + (lib (name "Connector")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Connector.kicad_sym")(options "")(descr "")) + (lib (name "Connector_Generic")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Connector_Generic.kicad_sym")(options "")(descr "")) + (lib (name "Converter_DCDC")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Converter_DCDC.kicad_sym")(options "")(descr "")) + (lib (name "Device")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Device.kicad_sym")(options "")(descr "")) + (lib (name "Driver_Motor")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Driver_Motor.kicad_sym")(options "")(descr "")) + (lib (name "Interface_USB")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Interface_USB.kicad_sym")(options "")(descr "")) + (lib (name "Jumper")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Jumper.kicad_sym")(options "")(descr "")) + (lib (name "Mechanical")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Mechanical.kicad_sym")(options "")(descr "")) + (lib (name "Power_Protection")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Power_Protection.kicad_sym")(options "")(descr "")) + (lib (name "RF_Module")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/RF_Module.kicad_sym")(options "")(descr "")) + (lib (name "Regulator_Linear")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Regulator_Linear.kicad_sym")(options "")(descr "")) + (lib (name "Switch")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Switch.kicad_sym")(options "")(descr "")) + (lib (name "Transistor_BJT")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/Transistor_BJT.kicad_sym")(options "")(descr "")) + (lib (name "power")(type "KiCad")(uri "${KICAD9_SYMBOL_DIR}/power.kicad_sym")(options "")(descr "")) +) diff --git a/pcb/pcbway-order/1-gerbers-sandtable-controller-v0.4.zip b/pcb/pcbway-order/1-gerbers-sandtable-controller-v0.4.zip new file mode 100644 index 0000000..1594f39 Binary files /dev/null and b/pcb/pcbway-order/1-gerbers-sandtable-controller-v0.4.zip differ diff --git a/pcb/pcbway-order/2-bom-sandtable-controller-v0.4.csv b/pcb/pcbway-order/2-bom-sandtable-controller-v0.4.csv new file mode 100644 index 0000000..fd24d27 --- /dev/null +++ b/pcb/pcbway-order/2-bom-sandtable-controller-v0.4.csv @@ -0,0 +1,32 @@ +Item #,Designator,Qty,Manufacturer,Mfg Part #,Description / Value,Package / Footprint,Type,Notes +1,U1,1,Espressif,ESP32-WROOM-32E-N8,"Wi-Fi + Bluetooth module, 8 MB flash, PCB antenna",ESP32-WROOM-32E,SMD, +2,U2,1,WCH,CH340C,"USB to UART bridge, SOIC-16",SOIC-16_3.9x9.9mm_P1.27mm,SMD, +3,U3,1,Diodes Incorporated,AP7361C-33E-13,"LDO regulator 3.3 V 1 A, low dropout, SOT-223 (pin 1 IN, 2 GND/tab, 3 OUT)",SOT-223-3_TabPin2,SMD,"Not an AMS1117: the pinout differs, no substitutes" +4,U5,1,STMicroelectronics,USBLC6-2SC6,"USB ESD protection, 2 lines, SOT-23-6",SOT-23-6,SMD, +5,U4,1,Texas Instruments,SN74AHCT1G125DBVR,"Single buffer, TTL-level input, SOT-23-5",SOT-23-5,SMD, +6,PS1,1,RECOM,R-78E5.0-1.0,"Switching regulator 5 V 1 A, SIP-3",Converter_DCDC_RECOM_R-78E-0.5_THT,Thru-Hole, +7,F1,1,Bourns,MF-MSMF250/16X-2,"PTC resettable fuse, 2.5 A hold, 5 A trip, 16 V, 1812",Fuse_1812_4532Metric,SMD, +8,J1,1,Same Sky (CUI Devices),PJ-063AH,"DC barrel jack, 2.0 mm pin, fits 5.5 x 2.1 mm plugs",BarrelJack_CUI_PJ-063AH_Horizontal,Thru-Hole, +9,J2,1,Korean Hroparts Elec,TYPE-C-31-M-12,"USB-C receptacle, USB 2.0, 16 pin",USB_C_Receptacle_HRO_TYPE-C-31-M-12,SMD, +10,"J3,J4",2,JST,B4B-XH-A(LF)(SN),"XH header, 4 pin, 2.5 mm pitch, vertical",JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical,Thru-Hole, +11,"J5,J6,J7",3,JST,B3B-XH-A(LF)(SN),"XH header, 3 pin, 2.5 mm pitch, vertical",JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical,Thru-Hole, +12,J8,1,Sullins,PRPC004SAAN-RC,"Male pin header 1 x 4, 2.54 mm pitch, vertical",PinHeader_1x04_P2.54mm_Vertical,Thru-Hole, +13,"A1,A2",4,Sullins,PPTC081LFBN-RC,"Female pin header 1 x 8, 2.54 mm pitch, 8.5 mm tall",Pololu_Breakout-16_15.2x20.3mm,Thru-Hole,2 headers per driver (4 total). Sockets only: the DRV8825 modules are supplied by me +14,"D1,D2",2,,SS34,"Schottky diode 40 V 3 A, SMA",D_SMA,SMD,Any brand +15,D3,1,,B5819W,"Schottky diode 40 V 1 A, SOD-123",D_SOD-123,SMD,Any brand +16,"D6,D7",2,,BAT54WS,"Schottky diode 30 V 0.2 A, SOD-323",D_SOD-323,SMD,Any brand +17,D4,1,,,"LED green, 0603",LED_0603_1608Metric,SMD,Any brand +18,D5,1,,,"LED blue, 0603",LED_0603_1608Metric,SMD,Any brand +19,"Q1,Q2",2,onsemi,MMBT3904LT1G,"NPN transistor 40 V 200 mA, SOT-23",SOT-23,SMD,Any MMBT3904 ok +20,"SW1,SW2",2,Omron,B3U-1000P,"Tactile switch, SMD, 3 x 2.5 mm",SW_SPST_B3U-1000P,SMD, +21,"C1,C2",2,Panasonic,EEE-FK1V101GP,"Aluminium electrolytic capacitor 100 uF 35 V, SMD 8 x 10.2 mm",CP_Elec_8x10,SMD, +22,"C3,C4",2,,,"Ceramic capacitor 10 uF 25 V X5R, 1206",C_1206_3216Metric,SMD,Any brand +23,"C16,C17",2,,,"Ceramic capacitor 10 uF 50 V X7R, 1206",C_1206_3216Metric,SMD,Any brand +24,"C5,C9",2,,,"Ceramic capacitor 10 uF 16 V X5R, 0805",C_0805_2012Metric,SMD,Any brand +25,C6,1,,,"Ceramic capacitor 22 uF 10 V X5R, 0805",C_0805_2012Metric,SMD,Any brand +26,"C7,C10,C13,C14,C15",5,,,"Ceramic capacitor 100 nF 50 V X7R, 0603",C_0603_1608Metric,SMD,Any brand +27,C8,1,,,"Ceramic capacitor 1 uF 16 V X7R, 0603",C_0603_1608Metric,SMD,Any brand +28,"R1,R2",2,,,"Resistor 5.1 k 1%, 0603",R_0603_1608Metric,SMD,Any brand +29,"R3,R4,R5,R6,R8,R9,R11",7,,,"Resistor 10 k 1%, 0603",R_0603_1608Metric,SMD,Any brand +30,"R10,R12,R14,R15",4,,,"Resistor 1 k 1%, 0603",R_0603_1608Metric,SMD,Any brand +31,R13,1,,,"Resistor 330 1%, 0603",R_0603_1608Metric,SMD,Any brand diff --git a/pcb/pcbway-order/3-centroid-sandtable-controller-v0.4.csv b/pcb/pcbway-order/3-centroid-sandtable-controller-v0.4.csv new file mode 100644 index 0000000..f1c0c8d --- /dev/null +++ b/pcb/pcbway-order/3-centroid-sandtable-controller-v0.4.csv @@ -0,0 +1,58 @@ +Designator,Mid X (mm),Mid Y (mm),Layer,Rotation,Value,Footprint +A1,38.100,61.440,Top,270,DRV8825 StepStick (theta/spin),Pololu_Breakout-16_15.2x20.3mm +A2,59.100,61.440,Top,270,DRV8825 StepStick (rho/arm),Pololu_Breakout-16_15.2x20.3mm +C1,24.000,42.340,Top,0,100uF 25V,CP_Elec_8x10 +C2,45.500,42.340,Top,0,100uF 25V,CP_Elec_8x10 +C3,20.500,23.740,Top,0,10uF 25V,C_1206_3216Metric +C4,26.000,23.740,Top,0,10uF 16V,C_1206_3216Metric +C5,59.600,19.340,Top,90,10uF,C_0805_2012Metric +C6,59.600,23.840,Top,90,22uF,C_0805_2012Metric +C7,27.000,20.340,Top,90,100nF,C_0603_1608Metric +C8,54.600,10.640,Top,0,1uF,C_0603_1608Metric +C9,57.500,8.740,Top,90,10uF,C_0805_2012Metric +C10,55.000,8.340,Top,90,100nF,C_0603_1608Metric +C13,61.000,44.840,Top,0,100nF,C_0603_1608Metric +C14,61.000,42.640,Top,0,100nF,C_0603_1608Metric +C15,61.000,33.340,Top,90,100nF,C_0603_1608Metric +C16,21.800,57.940,Top,0,10uF 50V,C_1206_3216Metric +C17,42.800,57.940,Top,0,10uF 50V,C_1206_3216Metric +D1,16.000,41.340,Top,90,SS34,D_SMA +D2,28.870,30.340,Top,90,SS34,D_SMA +D3,13.000,23.540,Top,0,B5819W,D_SOD-123 +D4,34.000,33.340,Top,0,GREEN,LED_0603_1608Metric +D5,38.000,33.340,Top,0,BLUE,LED_0603_1608Metric +D6,64.500,45.340,Top,0,BAT54WS,D_SOD-323 +D7,64.500,47.490,Top,0,BAT54WS,D_SOD-323 +F1,12.600,47.140,Top,0,2.5A PTC,Fuse_1812_4532Metric +J1,12.300,38.340,Top,270,12V DC 5.5x2.1,BarrelJack_CUI_PJ-063AH_Horizontal +J2,3.400,19.340,Top,270,USB-C,USB_C_Receptacle_HRO_TYPE-C-31-M-12 +J3,4.500,59.940,Top,270,SPIN MOTOR,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical +J4,76.500,59.940,Top,270,ARM MOTOR,JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical +J5,76.500,44.840,Top,270,HOME SW,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical +J6,76.500,33.740,Top,270,HALL,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical +J7,76.500,22.640,Top,270,LED STRIP,JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical +J8,77.500,11.340,Top,0,EXPANSION,PinHeader_1x04_P2.54mm_Vertical +PS1,18.000,28.340,Top,0,R-78E5.0-1.0,Converter_DCDC_RECOM_R-78E-0.5_THT +Q1,28.000,16.140,Top,0,MMBT3904,SOT-23 +Q2,28.000,12.140,Top,0,MMBT3904,SOT-23 +R1,11.500,20.590,Top,0,5.1k,R_0603_1608Metric +R2,11.500,17.590,Top,0,5.1k,R_0603_1608Metric +R3,31.000,18.340,Top,90,10k,R_0603_1608Metric +R4,31.000,13.840,Top,90,10k,R_0603_1608Metric +R5,54.600,12.340,Top,0,10k,R_0603_1608Metric +R6,31.000,25.840,Top,0,10k,R_0603_1608Metric +R8,47.000,32.340,Top,0,10k,R_0603_1608Metric +R9,54.000,44.840,Top,0,10k,R_0603_1608Metric +R10,57.500,44.840,Top,0,1k,R_0603_1608Metric +R11,54.000,42.640,Top,0,10k,R_0603_1608Metric +R12,57.500,42.640,Top,0,1k,R_0603_1608Metric +R13,70.000,33.340,Top,90,330,R_0603_1608Metric +R14,34.000,30.840,Top,0,1k,R_0603_1608Metric +R15,38.000,30.840,Top,0,1k,R_0603_1608Metric +SW1,27.500,8.340,Top,0,RESET,SW_SPST_B3U-1000P +SW2,22.000,8.340,Top,0,BOOT,SW_SPST_B3U-1000P +U1,43.000,12.750,Top,180,ESP32-WROOM-32E-N8,ESP32-WROOM-32E +U2,22.000,16.340,Top,0,CH340C,SOIC-16_3.9x9.9mm_P1.27mm +U3,66.000,21.840,Top,0,AP7361C-33E,SOT-223-3_TabPin2 +U4,65.500,33.340,Top,0,74AHCT1G125,SOT-23-5 +U5,13.000,13.840,Top,0,USBLC6-2SC6,SOT-23-6 diff --git a/pcb/pcbway-order/ORDER.md b/pcb/pcbway-order/ORDER.md new file mode 100644 index 0000000..6a73b62 --- /dev/null +++ b/pcb/pcbway-order/ORDER.md @@ -0,0 +1,53 @@ +# PCBWay order: SandTable Controller v0.4 + +## Files + +| File | Where it goes | +|---|---| +| `1-gerbers-sandtable-controller-v0.4.zip` | PCB order: **Upload Gerber file** | +| `2-bom-sandtable-controller-v0.4.csv` | Assembly order: **BOM file** | +| `3-centroid-sandtable-controller-v0.4.csv` | Assembly order: **Centroid / pick-and-place file** | +| `assembly-top-v0.4.pdf` | Attach if PCBWay asks for an assembly drawing | +| `schematic-v0.4.pdf` | Attach if PCBWay asks for a schematic | + +## PCB settings + +| Setting | Value | +|---|---| +| Board type | Single pieces | +| Size | 80 x 63.34 mm | +| Quantity | 5 (the minimum) | +| Layers | 2 | +| Material | FR-4, TG130-140 | +| Thickness | 1.6 mm | +| Min track / spacing | 6/6 mil | +| Min hole size | 0.3 mm | +| Solder mask / silkscreen | any colour / white | +| Surface finish | HASL lead-free (or ENIG) | +| Via process | Tenting vias | +| Finished copper | 1 oz | +| Product No. | Specify a location (the back of the board has a "WayWayWay" marker for it) | + +## Assembly settings (PCB Assembly quote) + +| Setting | Value | +|---|---| +| Service | Turnkey (PCBWay buys the parts) | +| Assembly side | Top side only | +| Quantity | 1 or 2 (fewer than the 5 bare boards is fine) | +| Unique parts | 31 | +| SMD parts | 47 | +| BGA / QFP parts | 0 | +| Through-hole parts | 12 (10 designators; each driver socket is 2 headers) | +| Accept alternatives | Yes, for lines marked "Any brand" | + +**Note for PCBWay** (paste into the comments box): + +> Please fit the female header sockets for A1 and A2 only. Do not supply the stepper driver modules; I will plug in my own. BOM lines marked "Any brand" may use any equivalent part to the description. U3 (AP7361C-33E) has a different pinout from AMS1117-type regulators, so please do not substitute it. Leave solder jumper JP1 open. C16 and C17 sit between the driver socket strips, under where the modules plug in; that is intended. Centroid coordinates are in mm, with the origin at the board's bottom-left corner. + +## When PCBWay sends their review +- Check the polarity of C1, C2 (electrolytic), D1-D3, D6, D7 (diodes) and D4, D5 (LEDs) against the + and bar marks in `assembly-top-v0.4.pdf`. +- Check that the ESP32 (U1) antenna end sits at the board edge, over the copper-free area. +- Check that pin 1 of U2, U3, U4 and U5 is at the dot or triangle on the silkscreen. +- U3 is an AP7361C-33E, not an AMS1117: its pinout is different (pin 1 IN, pin 2 GND/tab, pin 3 OUT), so it must not be swapped for a 1117-type regulator. +- JP1 is a solder jumper (bare pads), not a part: leave it open. diff --git a/pcb/pcbway-order/assembly-top-v0.4.pdf b/pcb/pcbway-order/assembly-top-v0.4.pdf new file mode 100644 index 0000000..6b17cf4 Binary files /dev/null and b/pcb/pcbway-order/assembly-top-v0.4.pdf differ diff --git a/pcb/pcbway-order/schematic-v0.4.pdf b/pcb/pcbway-order/schematic-v0.4.pdf new file mode 100644 index 0000000..5f1c3c4 Binary files /dev/null and b/pcb/pcbway-order/schematic-v0.4.pdf differ diff --git a/pcb/renders/render-bottom.png b/pcb/renders/render-bottom.png new file mode 100644 index 0000000..559f021 Binary files /dev/null and b/pcb/renders/render-bottom.png differ diff --git a/pcb/renders/render-iso.png b/pcb/renders/render-iso.png new file mode 100644 index 0000000..80f145e Binary files /dev/null and b/pcb/renders/render-iso.png differ diff --git a/pcb/renders/render-top.png b/pcb/renders/render-top.png new file mode 100644 index 0000000..12dd135 Binary files /dev/null and b/pcb/renders/render-top.png differ diff --git a/pcb/sandtable-controller-schematic.pdf b/pcb/sandtable-controller-schematic.pdf new file mode 100644 index 0000000..5f1c3c4 Binary files /dev/null and b/pcb/sandtable-controller-schematic.pdf differ diff --git a/pcb/sandtable-controller.step b/pcb/sandtable-controller.step new file mode 100644 index 0000000..173129d --- /dev/null +++ b/pcb/sandtable-controller.step @@ -0,0 +1,68864 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('KiCad electronic assembly'),'2;1'); +FILE_NAME('sandtable-controller.step','2026-10-29T10:43:10',('Pcbnew'),( + 'Kicad'),'Open CASCADE STEP processor 7.6','KiCad to STEP converter' + ,'Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('sandtable-controller 1','sandtable-controller 1','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = SHAPE_REPRESENTATION('',(#11,#15,#19,#23,#27,#31,#35,#39,#43,#47, + #51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111, + #115,#119,#123,#127,#131,#135,#139,#143,#147,#151,#155,#159,#163, + #167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215, + #219,#223,#227),#231); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.,0.,0.)); +#13 = DIRECTION('',(0.,0.,1.)); +#14 = DIRECTION('',(1.,0.,-0.)); +#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18); +#16 = CARTESIAN_POINT('',(124.,-121.,1.595)); +#17 = DIRECTION('',(0.,0.,1.)); +#18 = DIRECTION('',(1.,0.,0.)); +#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22); +#20 = CARTESIAN_POINT('',(155.,-155.,1.595)); +#21 = DIRECTION('',(0.,-0.,1.)); +#22 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23 = AXIS2_PLACEMENT_3D('',#24,#25,#26); +#24 = CARTESIAN_POINT('',(161.,-118.5,1.595)); +#25 = DIRECTION('',(0.,0.,1.)); +#26 = DIRECTION('',(1.,0.,0.)); +#27 = AXIS2_PLACEMENT_3D('',#28,#29,#30); +#28 = CARTESIAN_POINT('',(161.,-120.7,1.595)); +#29 = DIRECTION('',(0.,0.,1.)); +#30 = DIRECTION('',(1.,0.,0.)); +#31 = AXIS2_PLACEMENT_3D('',#32,#33,#34); +#32 = CARTESIAN_POINT('',(161.,-130.,1.595)); +#33 = DIRECTION('',(0.,-0.,1.)); +#34 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38); +#36 = CARTESIAN_POINT('',(121.8,-105.4,1.595)); +#37 = DIRECTION('',(0.,0.,1.)); +#38 = DIRECTION('',(1.,0.,0.)); +#39 = AXIS2_PLACEMENT_3D('',#40,#41,#42); +#40 = CARTESIAN_POINT('',(142.8,-105.4,1.595)); +#41 = DIRECTION('',(0.,0.,1.)); +#42 = DIRECTION('',(1.,0.,0.)); +#43 = AXIS2_PLACEMENT_3D('',#44,#45,#46); +#44 = CARTESIAN_POINT('',(145.5,-121.,1.595)); +#45 = DIRECTION('',(0.,0.,1.)); +#46 = DIRECTION('',(1.,0.,0.)); +#47 = AXIS2_PLACEMENT_3D('',#48,#49,#50); +#48 = CARTESIAN_POINT('',(120.5,-139.6,1.595)); +#49 = DIRECTION('',(0.,0.,1.)); +#50 = DIRECTION('',(1.,0.,0.)); +#51 = AXIS2_PLACEMENT_3D('',#52,#53,#54); +#52 = CARTESIAN_POINT('',(126.,-139.6,1.595)); +#53 = DIRECTION('',(0.,0.,1.)); +#54 = DIRECTION('',(1.,0.,0.)); +#55 = AXIS2_PLACEMENT_3D('',#56,#57,#58); +#56 = CARTESIAN_POINT('',(159.6,-144.,1.595)); +#57 = DIRECTION('',(0.,-0.,1.)); +#58 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62); +#60 = CARTESIAN_POINT('',(159.6,-139.5,1.595)); +#61 = DIRECTION('',(0.,-0.,1.)); +#62 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#63 = AXIS2_PLACEMENT_3D('',#64,#65,#66); +#64 = CARTESIAN_POINT('',(127.,-143.,1.595)); +#65 = DIRECTION('',(0.,-0.,1.)); +#66 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#67 = AXIS2_PLACEMENT_3D('',#68,#69,#70); +#68 = CARTESIAN_POINT('',(154.6,-152.7,1.595)); +#69 = DIRECTION('',(0.,0.,1.)); +#70 = DIRECTION('',(1.,0.,0.)); +#71 = AXIS2_PLACEMENT_3D('',#72,#73,#74); +#72 = CARTESIAN_POINT('',(157.5,-154.6,1.595)); +#73 = DIRECTION('',(0.,-0.,1.)); +#74 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#75 = AXIS2_PLACEMENT_3D('',#76,#77,#78); +#76 = CARTESIAN_POINT('',(116.,-122.,1.595)); +#77 = DIRECTION('',(0.,-0.,1.)); +#78 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#79 = AXIS2_PLACEMENT_3D('',#80,#81,#82); +#80 = CARTESIAN_POINT('',(128.87,-133.,1.595)); +#81 = DIRECTION('',(0.,-0.,1.)); +#82 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#83 = AXIS2_PLACEMENT_3D('',#84,#85,#86); +#84 = CARTESIAN_POINT('',(113.,-139.8,1.595)); +#85 = DIRECTION('',(0.,0.,1.)); +#86 = DIRECTION('',(1.,0.,0.)); +#87 = AXIS2_PLACEMENT_3D('',#88,#89,#90); +#88 = CARTESIAN_POINT('',(134.,-130.,1.595)); +#89 = DIRECTION('',(0.,0.,1.)); +#90 = DIRECTION('',(1.,0.,0.)); +#91 = AXIS2_PLACEMENT_3D('',#92,#93,#94); +#92 = CARTESIAN_POINT('',(138.,-130.,1.595)); +#93 = DIRECTION('',(0.,0.,1.)); +#94 = DIRECTION('',(1.,0.,0.)); +#95 = AXIS2_PLACEMENT_3D('',#96,#97,#98); +#96 = CARTESIAN_POINT('',(164.5,-118.,1.595)); +#97 = DIRECTION('',(0.,0.,1.)); +#98 = DIRECTION('',(1.,0.,0.)); +#99 = AXIS2_PLACEMENT_3D('',#100,#101,#102); +#100 = CARTESIAN_POINT('',(164.5,-115.85,1.595)); +#101 = DIRECTION('',(0.,0.,1.)); +#102 = DIRECTION('',(1.,0.,0.)); +#103 = AXIS2_PLACEMENT_3D('',#104,#105,#106); +#104 = CARTESIAN_POINT('',(112.3,-125.,1.595)); +#105 = DIRECTION('',(-0.,0.,1.)); +#106 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110); +#108 = CARTESIAN_POINT('',(104.5,-103.4,1.595)); +#109 = DIRECTION('',(-0.,0.,1.)); +#110 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#111 = AXIS2_PLACEMENT_3D('',#112,#113,#114); +#112 = CARTESIAN_POINT('',(176.5,-103.4,1.595)); +#113 = DIRECTION('',(-0.,0.,1.)); +#114 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#115 = AXIS2_PLACEMENT_3D('',#116,#117,#118); +#116 = CARTESIAN_POINT('',(176.5,-118.5,1.595)); +#117 = DIRECTION('',(-0.,0.,1.)); +#118 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#119 = AXIS2_PLACEMENT_3D('',#120,#121,#122); +#120 = CARTESIAN_POINT('',(176.5,-129.6,1.595)); +#121 = DIRECTION('',(-0.,0.,1.)); +#122 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#123 = AXIS2_PLACEMENT_3D('',#124,#125,#126); +#124 = CARTESIAN_POINT('',(176.5,-140.7,1.595)); +#125 = DIRECTION('',(-0.,0.,1.)); +#126 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130); +#128 = CARTESIAN_POINT('',(177.5,-152.,1.595)); +#129 = DIRECTION('',(0.,0.,1.)); +#130 = DIRECTION('',(1.,0.,0.)); +#131 = AXIS2_PLACEMENT_3D('',#132,#133,#134); +#132 = CARTESIAN_POINT('',(118.,-135.,1.595)); +#133 = DIRECTION('',(0.,0.,1.)); +#134 = DIRECTION('',(1.,0.,0.)); +#135 = AXIS2_PLACEMENT_3D('',#136,#137,#138); +#136 = CARTESIAN_POINT('',(128.,-147.2,1.595)); +#137 = DIRECTION('',(0.,0.,1.)); +#138 = DIRECTION('',(1.,0.,0.)); +#139 = AXIS2_PLACEMENT_3D('',#140,#141,#142); +#140 = CARTESIAN_POINT('',(128.,-151.2,1.595)); +#141 = DIRECTION('',(0.,0.,1.)); +#142 = DIRECTION('',(1.,0.,0.)); +#143 = AXIS2_PLACEMENT_3D('',#144,#145,#146); +#144 = CARTESIAN_POINT('',(111.5,-142.75,1.595)); +#145 = DIRECTION('',(0.,0.,1.)); +#146 = DIRECTION('',(1.,0.,0.)); +#147 = AXIS2_PLACEMENT_3D('',#148,#149,#150); +#148 = CARTESIAN_POINT('',(157.5,-118.5,1.595)); +#149 = DIRECTION('',(0.,0.,1.)); +#150 = DIRECTION('',(1.,0.,0.)); +#151 = AXIS2_PLACEMENT_3D('',#152,#153,#154); +#152 = CARTESIAN_POINT('',(154.,-120.7,1.595)); +#153 = DIRECTION('',(0.,0.,1.)); +#154 = DIRECTION('',(1.,0.,0.)); +#155 = AXIS2_PLACEMENT_3D('',#156,#157,#158); +#156 = CARTESIAN_POINT('',(157.5,-120.7,1.595)); +#157 = DIRECTION('',(0.,0.,1.)); +#158 = DIRECTION('',(1.,0.,0.)); +#159 = AXIS2_PLACEMENT_3D('',#160,#161,#162); +#160 = CARTESIAN_POINT('',(170.,-130.,1.595)); +#161 = DIRECTION('',(0.,-0.,1.)); +#162 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#163 = AXIS2_PLACEMENT_3D('',#164,#165,#166); +#164 = CARTESIAN_POINT('',(134.,-132.5,1.595)); +#165 = DIRECTION('',(0.,0.,1.)); +#166 = DIRECTION('',(1.,0.,0.)); +#167 = AXIS2_PLACEMENT_3D('',#168,#169,#170); +#168 = CARTESIAN_POINT('',(138.,-132.5,1.595)); +#169 = DIRECTION('',(0.,0.,1.)); +#170 = DIRECTION('',(1.,0.,0.)); +#171 = AXIS2_PLACEMENT_3D('',#172,#173,#174); +#172 = CARTESIAN_POINT('',(111.5,-145.75,1.595)); +#173 = DIRECTION('',(0.,0.,1.)); +#174 = DIRECTION('',(1.,0.,0.)); +#175 = AXIS2_PLACEMENT_3D('',#176,#177,#178); +#176 = CARTESIAN_POINT('',(131.,-145.,1.595)); +#177 = DIRECTION('',(0.,-0.,1.)); +#178 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#179 = AXIS2_PLACEMENT_3D('',#180,#181,#182); +#180 = CARTESIAN_POINT('',(131.,-149.5,1.595)); +#181 = DIRECTION('',(0.,-0.,1.)); +#182 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#183 = AXIS2_PLACEMENT_3D('',#184,#185,#186); +#184 = CARTESIAN_POINT('',(154.6,-151.,1.595)); +#185 = DIRECTION('',(0.,0.,1.)); +#186 = DIRECTION('',(1.,0.,0.)); +#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190); +#188 = CARTESIAN_POINT('',(131.,-137.5,1.595)); +#189 = DIRECTION('',(0.,0.,1.)); +#190 = DIRECTION('',(1.,0.,0.)); +#191 = AXIS2_PLACEMENT_3D('',#192,#193,#194); +#192 = CARTESIAN_POINT('',(147.,-131.,1.595)); +#193 = DIRECTION('',(0.,0.,1.)); +#194 = DIRECTION('',(1.,0.,0.)); +#195 = AXIS2_PLACEMENT_3D('',#196,#197,#198); +#196 = CARTESIAN_POINT('',(154.,-118.5,1.595)); +#197 = DIRECTION('',(0.,0.,1.)); +#198 = DIRECTION('',(1.,0.,0.)); +#199 = AXIS2_PLACEMENT_3D('',#200,#201,#202); +#200 = CARTESIAN_POINT('',(127.5,-155.,1.595)); +#201 = DIRECTION('',(0.,0.,1.)); +#202 = DIRECTION('',(1.,0.,0.)); +#203 = AXIS2_PLACEMENT_3D('',#204,#205,#206); +#204 = CARTESIAN_POINT('',(122.,-155.,1.595)); +#205 = DIRECTION('',(0.,0.,1.)); +#206 = DIRECTION('',(1.,0.,0.)); +#207 = AXIS2_PLACEMENT_3D('',#208,#209,#210); +#208 = CARTESIAN_POINT('',(143.,-150.59,1.595)); +#209 = DIRECTION('',(0.,0.,1.)); +#210 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#211 = AXIS2_PLACEMENT_3D('',#212,#213,#214); +#212 = CARTESIAN_POINT('',(122.,-147.,1.595)); +#213 = DIRECTION('',(0.,0.,1.)); +#214 = DIRECTION('',(1.,0.,0.)); +#215 = AXIS2_PLACEMENT_3D('',#216,#217,#218); +#216 = CARTESIAN_POINT('',(166.,-141.5,1.595)); +#217 = DIRECTION('',(0.,0.,1.)); +#218 = DIRECTION('',(1.,0.,0.)); +#219 = AXIS2_PLACEMENT_3D('',#220,#221,#222); +#220 = CARTESIAN_POINT('',(165.5,-130.,1.595)); +#221 = DIRECTION('',(0.,0.,1.)); +#222 = DIRECTION('',(1.,0.,0.)); +#223 = AXIS2_PLACEMENT_3D('',#224,#225,#226); +#224 = CARTESIAN_POINT('',(113.,-149.5,1.595)); +#225 = DIRECTION('',(0.,0.,1.)); +#226 = DIRECTION('',(1.,0.,0.)); +#227 = AXIS2_PLACEMENT_3D('',#228,#229,#230); +#228 = CARTESIAN_POINT('',(0.,0.,0.)); +#229 = DIRECTION('',(0.,0.,1.)); +#230 = DIRECTION('',(1.,0.,-0.)); +#231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#235)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#232,#233,#234)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#232 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#233 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#234 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#235 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#232, + 'distance_accuracy_value','confusion accuracy'); +#236 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#237 = SHAPE_DEFINITION_REPRESENTATION(#238,#244); +#238 = PRODUCT_DEFINITION_SHAPE('','',#239); +#239 = PRODUCT_DEFINITION('design','',#240,#243); +#240 = PRODUCT_DEFINITION_FORMATION('','',#241); +#241 = PRODUCT('CP_Elec_8x10','CP_Elec_8x10','',(#242)); +#242 = PRODUCT_CONTEXT('',#2,'mechanical'); +#243 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#244 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#245),#1608); +#245 = MANIFOLD_SOLID_BREP('',#246); +#246 = CLOSED_SHELL('',(#247,#290,#316,#389,#468,#508,#587,#612,#637, + #693,#749,#774,#799,#864,#937,#1023,#1040,#1071,#1083,#1100,#1112, + #1130,#1142,#1160,#1172,#1203,#1255,#1287,#1312,#1337,#1369,#1394, + #1419,#1436,#1453,#1500,#1540,#1558,#1570,#1582,#1598)); +#247 = ADVANCED_FACE('',(#248),#285,.T.); +#248 = FACE_BOUND('',#249,.T.); +#249 = EDGE_LOOP('',(#250,#269,#277,#284)); +#250 = ORIENTED_EDGE('',*,*,#251,.T.); +#251 = EDGE_CURVE('',#252,#252,#254,.T.); +#252 = VERTEX_POINT('',#253); +#253 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#254 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#255,#256,#257,#258,#259, + #260,#261,#262,#263,#264,#265,#266,#267,#268),.UNSPECIFIED.,.T.,.F.) + B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-25.13274122871, + 4.970488814277E-16,25.132741228718,50.265482457436),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1., + 1.000000000001,0.999999999997,1.000000000006,0.999999999991, + 1.000000000009,0.999999999992,1.000000000006,0.999999999996, +1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') ); +#255 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#256 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822,1.611821953996 + )); +#257 = CARTESIAN_POINT('',(-3.015267027679,3.854580985394,1.611821953996 + )); +#258 = CARTESIAN_POINT('',(-0.988824457305,5.248384513409,1.611821953996 + )); +#259 = CARTESIAN_POINT('',(1.799817736615,5.462446172588,1.611821953996) + ); +#260 = CARTESIAN_POINT('',(4.208872671042,3.976872241641,1.611821953996) + ); +#261 = CARTESIAN_POINT('',(5.97566140596,1.80826619315,1.611821953996)); +#262 = CARTESIAN_POINT('',(5.975661406084,-1.808266193181,1.611821953996 + )); +#263 = CARTESIAN_POINT('',(4.208872670967,-3.976872241588,1.611821953996 + )); +#264 = CARTESIAN_POINT('',(1.79981773664,-5.462446172636,1.611821953996) + ); +#265 = CARTESIAN_POINT('',(-0.988824457304,-5.248384513387, + 1.611821953996)); +#266 = CARTESIAN_POINT('',(-3.015267027683,-3.8545809854,1.611821953996) + ); +#267 = CARTESIAN_POINT('',(-4.,-1.905321418822,1.611821953996)); +#268 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#269 = ORIENTED_EDGE('',*,*,#270,.F.); +#270 = EDGE_CURVE('',#271,#252,#273,.T.); +#271 = VERTEX_POINT('',#272); +#272 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.183333333333)); +#273 = LINE('',#274,#275); +#274 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,0.65)); +#275 = VECTOR('',#276,1.); +#276 = DIRECTION('',(0.,0.,1.)); +#277 = ORIENTED_EDGE('',*,*,#278,.F.); +#278 = EDGE_CURVE('',#271,#271,#279,.T.); +#279 = CIRCLE('',#280,4.); +#280 = AXIS2_PLACEMENT_3D('',#281,#282,#283); +#281 = CARTESIAN_POINT('',(0.,0.,1.183333333333)); +#282 = DIRECTION('',(0.,0.,-1.)); +#283 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#284 = ORIENTED_EDGE('',*,*,#270,.T.); +#285 = CYLINDRICAL_SURFACE('',#286,4.); +#286 = AXIS2_PLACEMENT_3D('',#287,#288,#289); +#287 = CARTESIAN_POINT('',(0.,0.,0.65)); +#288 = DIRECTION('',(0.,0.,1.)); +#289 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#290 = ADVANCED_FACE('',(#291),#311,.T.); +#291 = FACE_BOUND('',#292,.T.); +#292 = EDGE_LOOP('',(#293,#294,#303,#310)); +#293 = ORIENTED_EDGE('',*,*,#278,.T.); +#294 = ORIENTED_EDGE('',*,*,#295,.T.); +#295 = EDGE_CURVE('',#271,#296,#298,.T.); +#296 = VERTEX_POINT('',#297); +#297 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16,0.65)); +#298 = CIRCLE('',#299,0.533333333333); +#299 = AXIS2_PLACEMENT_3D('',#300,#301,#302); +#300 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16, + 1.183333333333)); +#301 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#302 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#303 = ORIENTED_EDGE('',*,*,#304,.F.); +#304 = EDGE_CURVE('',#296,#296,#305,.T.); +#305 = CIRCLE('',#306,3.466666666667); +#306 = AXIS2_PLACEMENT_3D('',#307,#308,#309); +#307 = CARTESIAN_POINT('',(0.,0.,0.65)); +#308 = DIRECTION('',(0.,0.,-1.)); +#309 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#310 = ORIENTED_EDGE('',*,*,#295,.F.); +#311 = TOROIDAL_SURFACE('',#312,3.466666666667,0.533333333333); +#312 = AXIS2_PLACEMENT_3D('',#313,#314,#315); +#313 = CARTESIAN_POINT('',(0.,0.,1.183333333333)); +#314 = DIRECTION('',(0.,0.,-1.)); +#315 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#316 = ADVANCED_FACE('',(#317),#346,.T.); +#317 = FACE_BOUND('',#318,.T.); +#318 = EDGE_LOOP('',(#319,#327,#344,#345)); +#319 = ORIENTED_EDGE('',*,*,#320,.T.); +#320 = EDGE_CURVE('',#252,#321,#323,.T.); +#321 = VERTEX_POINT('',#322); +#322 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#323 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#324,#325,#326), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +25.132741228718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#324 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#325 = CARTESIAN_POINT('',(-4.,1.576662977358E-15,1.648336791163)); +#326 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#327 = ORIENTED_EDGE('',*,*,#328,.T.); +#328 = EDGE_CURVE('',#321,#321,#329,.T.); +#329 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#330,#331,#332,#333,#334, + #335,#336,#337,#338,#339,#340,#341,#342,#343),.UNSPECIFIED.,.T.,.F.) + B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-25.13274122871, + 4.970488814277E-16,25.132741228718,50.265482457436),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1., + 1.000000000001,0.999999999997,1.000000000006,0.999999999991, + 1.000000000009,0.999999999992,1.000000000006,0.999999999996, +1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') ); +#330 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#331 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015,1.651656321814 + )); +#332 = CARTESIAN_POINT('',(-2.987855509242,3.819539340072,1.651656321814 + )); +#333 = CARTESIAN_POINT('',(-0.979835144065,5.200671926925,1.651656321814 + )); +#334 = CARTESIAN_POINT('',(1.783455757207,5.412787571016,1.651656321814) + ); +#335 = CARTESIAN_POINT('',(4.17061019219,3.940718857632,1.651656321814) + ); +#336 = CARTESIAN_POINT('',(5.921337211391,1.791827409569,1.651656321814) + ); +#337 = CARTESIAN_POINT('',(5.921337211452,-1.791827409599,1.651656321814 + )); +#338 = CARTESIAN_POINT('',(4.170610192166,-3.94071885758,1.651656321814) + ); +#339 = CARTESIAN_POINT('',(1.7834557572,-5.412787571063,1.651656321814) + ); +#340 = CARTESIAN_POINT('',(-0.979835144048,-5.200671926903, + 1.651656321814)); +#341 = CARTESIAN_POINT('',(-2.987855509252,-3.819539340077, + 1.651656321814)); +#342 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 1.651656321814)); +#343 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#344 = ORIENTED_EDGE('',*,*,#320,.F.); +#345 = ORIENTED_EDGE('',*,*,#251,.F.); +#346 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#347,#348,#349,#350,#351,#352,#353,#354,#355,#356,#357,#358,#359 + ,#360) + ,(#361,#362,#363,#364,#365,#366,#367,#368,#369,#370,#371,#372,#373 + ,#374) + ,(#375,#376,#377,#378,#379,#380,#381,#382,#383,#384,#385,#386,#387 +,#388 + )),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1, + 13,13,1),(0.,25.132741228718),(-25.13274122871,4.970488814277E-16, + 25.132741228718,50.265482457436),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 + ,1.000000000002,0.999999999999,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945877,0.738548945873 + ,0.738548945881,0.738548945869,0.738548945883,0.738548945869 + ,0.738548945881,0.738548945873,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 +,1.000000000002,0.999999999999,1.,1. + ))) REPRESENTATION_ITEM('') SURFACE() ); +#347 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#348 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822,1.611821953996 + )); +#349 = CARTESIAN_POINT('',(-3.015267027679,3.854580985394,1.611821953996 + )); +#350 = CARTESIAN_POINT('',(-0.988824457305,5.248384513409,1.611821953996 + )); +#351 = CARTESIAN_POINT('',(1.799817736615,5.462446172588,1.611821953996) + ); +#352 = CARTESIAN_POINT('',(4.208872671042,3.976872241641,1.611821953996) + ); +#353 = CARTESIAN_POINT('',(5.97566140596,1.80826619315,1.611821953996)); +#354 = CARTESIAN_POINT('',(5.975661406084,-1.808266193181,1.611821953996 + )); +#355 = CARTESIAN_POINT('',(4.208872670967,-3.976872241588,1.611821953996 + )); +#356 = CARTESIAN_POINT('',(1.79981773664,-5.462446172636,1.611821953996) + ); +#357 = CARTESIAN_POINT('',(-0.988824457304,-5.248384513387, + 1.611821953996)); +#358 = CARTESIAN_POINT('',(-3.015267027683,-3.8545809854,1.611821953996) + ); +#359 = CARTESIAN_POINT('',(-4.,-1.905321418822,1.611821953996)); +#360 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.611821953996)); +#361 = CARTESIAN_POINT('',(-4.,1.576662977358E-15,1.648336791163)); +#362 = CARTESIAN_POINT('',(-4.000000000002,1.905321418822,1.648336791163 + )); +#363 = CARTESIAN_POINT('',(-3.015267027675,3.854580985394,1.648336791163 + )); +#364 = CARTESIAN_POINT('',(-0.988824457313,5.248384513409,1.648336791163 + )); +#365 = CARTESIAN_POINT('',(1.799817736629,5.462446172589,1.648336791163) + ); +#366 = CARTESIAN_POINT('',(4.208872671023,3.97687224164,1.648336791163) + ); +#367 = CARTESIAN_POINT('',(5.975661405982,1.808266193155,1.648336791163) + ); +#368 = CARTESIAN_POINT('',(5.975661406061,-1.808266193186,1.648336791163 + )); +#369 = CARTESIAN_POINT('',(4.208872670986,-3.976872241584,1.648336791163 + )); +#370 = CARTESIAN_POINT('',(1.799817736628,-5.462446172638,1.648336791163 + )); +#371 = CARTESIAN_POINT('',(-0.988824457298,-5.248384513386, + 1.648336791163)); +#372 = CARTESIAN_POINT('',(-3.015267027685,-3.8545809854,1.648336791163) + ); +#373 = CARTESIAN_POINT('',(-3.999999999999,-1.905321418822, + 1.648336791163)); +#374 = CARTESIAN_POINT('',(-4.,1.576662977358E-15,1.648336791163)); +#375 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#376 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015,1.651656321814 + )); +#377 = CARTESIAN_POINT('',(-2.987855509242,3.819539340072,1.651656321814 + )); +#378 = CARTESIAN_POINT('',(-0.979835144065,5.200671926925,1.651656321814 + )); +#379 = CARTESIAN_POINT('',(1.783455757207,5.412787571016,1.651656321814) + ); +#380 = CARTESIAN_POINT('',(4.17061019219,3.940718857632,1.651656321814) + ); +#381 = CARTESIAN_POINT('',(5.921337211391,1.791827409569,1.651656321814) + ); +#382 = CARTESIAN_POINT('',(5.921337211452,-1.791827409599,1.651656321814 + )); +#383 = CARTESIAN_POINT('',(4.170610192166,-3.94071885758,1.651656321814) + ); +#384 = CARTESIAN_POINT('',(1.7834557572,-5.412787571063,1.651656321814) + ); +#385 = CARTESIAN_POINT('',(-0.979835144048,-5.200671926903, + 1.651656321814)); +#386 = CARTESIAN_POINT('',(-2.987855509252,-3.819539340077, + 1.651656321814)); +#387 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 1.651656321814)); +#388 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 1.651656321814)); +#389 = ADVANCED_FACE('',(#390,#460),#463,.T.); +#390 = FACE_BOUND('',#391,.T.); +#391 = EDGE_LOOP('',(#392,#402,#411,#419,#428,#436,#445,#453)); +#392 = ORIENTED_EDGE('',*,*,#393,.T.); +#393 = EDGE_CURVE('',#394,#396,#398,.T.); +#394 = VERTEX_POINT('',#395); +#395 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.65)); +#396 = VERTEX_POINT('',#397); +#397 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.65)); +#398 = LINE('',#399,#400); +#399 = CARTESIAN_POINT('',(-4.15,1.575,0.65)); +#400 = VECTOR('',#401,1.); +#401 = DIRECTION('',(-1.224646799147E-16,-1.,1.245168191405E-33)); +#402 = ORIENTED_EDGE('',*,*,#403,.T.); +#403 = EDGE_CURVE('',#396,#404,#406,.T.); +#404 = VERTEX_POINT('',#405); +#405 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.65)); +#406 = CIRCLE('',#407,4.2); +#407 = AXIS2_PLACEMENT_3D('',#408,#409,#410); +#408 = CARTESIAN_POINT('',(0.,0.,0.65)); +#409 = DIRECTION('',(0.,0.,1.)); +#410 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#411 = ORIENTED_EDGE('',*,*,#412,.T.); +#412 = EDGE_CURVE('',#404,#413,#415,.T.); +#413 = VERTEX_POINT('',#414); +#414 = CARTESIAN_POINT('',(0.646142399166,-4.15,0.65)); +#415 = LINE('',#416,#417); +#416 = CARTESIAN_POINT('',(-1.575,-4.15,0.65)); +#417 = VECTOR('',#418,1.); +#418 = DIRECTION('',(1.,-1.224646799147E-16,-1.863333581871E-33)); +#419 = ORIENTED_EDGE('',*,*,#420,.T.); +#420 = EDGE_CURVE('',#413,#421,#423,.T.); +#421 = VERTEX_POINT('',#422); +#422 = CARTESIAN_POINT('',(4.15,-0.646142399166,0.65)); +#423 = CIRCLE('',#424,4.2); +#424 = AXIS2_PLACEMENT_3D('',#425,#426,#427); +#425 = CARTESIAN_POINT('',(0.,0.,0.65)); +#426 = DIRECTION('',(0.,0.,1.)); +#427 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#428 = ORIENTED_EDGE('',*,*,#429,.T.); +#429 = EDGE_CURVE('',#421,#430,#432,.T.); +#430 = VERTEX_POINT('',#431); +#431 = CARTESIAN_POINT('',(4.15,0.646142399166,0.65)); +#432 = LINE('',#433,#434); +#433 = CARTESIAN_POINT('',(4.15,-2.075,0.65)); +#434 = VECTOR('',#435,1.); +#435 = DIRECTION('',(1.224646799147E-16,1.,-1.245168191405E-33)); +#436 = ORIENTED_EDGE('',*,*,#437,.T.); +#437 = EDGE_CURVE('',#430,#438,#440,.T.); +#438 = VERTEX_POINT('',#439); +#439 = CARTESIAN_POINT('',(0.646142399166,4.15,0.65)); +#440 = CIRCLE('',#441,4.2); +#441 = AXIS2_PLACEMENT_3D('',#442,#443,#444); +#442 = CARTESIAN_POINT('',(0.,0.,0.65)); +#443 = DIRECTION('',(0.,0.,1.)); +#444 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#445 = ORIENTED_EDGE('',*,*,#446,.T.); +#446 = EDGE_CURVE('',#438,#447,#449,.T.); +#447 = VERTEX_POINT('',#448); +#448 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.65)); +#449 = LINE('',#450,#451); +#450 = CARTESIAN_POINT('',(2.075,4.15,0.65)); +#451 = VECTOR('',#452,1.); +#452 = DIRECTION('',(-1.,1.224646799147E-16,1.863333581871E-33)); +#453 = ORIENTED_EDGE('',*,*,#454,.T.); +#454 = EDGE_CURVE('',#447,#394,#455,.T.); +#455 = CIRCLE('',#456,4.2); +#456 = AXIS2_PLACEMENT_3D('',#457,#458,#459); +#457 = CARTESIAN_POINT('',(0.,0.,0.65)); +#458 = DIRECTION('',(0.,0.,1.)); +#459 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#460 = FACE_BOUND('',#461,.T.); +#461 = EDGE_LOOP('',(#462)); +#462 = ORIENTED_EDGE('',*,*,#304,.T.); +#463 = PLANE('',#464); +#464 = AXIS2_PLACEMENT_3D('',#465,#466,#467); +#465 = CARTESIAN_POINT('',(3.25580983938E-16,-1.541304320573E-16,0.65)); +#466 = DIRECTION('',(1.863333581871E-33,1.245168191405E-33,1.)); +#467 = DIRECTION('',(-1.,1.224646799147E-16,1.863333581871E-33)); +#468 = ADVANCED_FACE('',(#469),#499,.F.); +#469 = FACE_BOUND('',#470,.F.); +#470 = EDGE_LOOP('',(#471,#480,#481,#482)); +#471 = ORIENTED_EDGE('',*,*,#472,.F.); +#472 = EDGE_CURVE('',#321,#473,#475,.T.); +#473 = VERTEX_POINT('',#474); +#474 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#475 = CIRCLE('',#476,0.4); +#476 = AXIS2_PLACEMENT_3D('',#477,#478,#479); +#477 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.05)); +#478 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#479 = DIRECTION('',(0.,0.,-1.)); +#480 = ORIENTED_EDGE('',*,*,#328,.T.); +#481 = ORIENTED_EDGE('',*,*,#472,.T.); +#482 = ORIENTED_EDGE('',*,*,#483,.F.); +#483 = EDGE_CURVE('',#473,#473,#484,.T.); +#484 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#485,#486,#487,#488,#489, + #490,#491,#492,#493,#494,#495,#496,#497,#498),.UNSPECIFIED.,.T.,.F.) + B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-25.13274122871, + 4.970488814277E-16,25.132741228718,50.265482457436),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1., + 1.000000000001,0.999999999997,1.000000000006,0.999999999991, + 1.000000000009,0.999999999992,1.000000000006,0.999999999996, +1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') ); +#485 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#486 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015,2.448343678186 + )); +#487 = CARTESIAN_POINT('',(-2.987855509242,3.819539340071,2.448343678186 + )); +#488 = CARTESIAN_POINT('',(-0.979835144066,5.200671926926,2.448343678186 + )); +#489 = CARTESIAN_POINT('',(1.783455757208,5.412787571015,2.448343678186) + ); +#490 = CARTESIAN_POINT('',(4.170610192189,3.940718857633,2.448343678186) + ); +#491 = CARTESIAN_POINT('',(5.921337211392,1.791827409569,2.448343678186) + ); +#492 = CARTESIAN_POINT('',(5.921337211452,-1.791827409599,2.448343678186 + )); +#493 = CARTESIAN_POINT('',(4.170610192165,-3.940718857579,2.448343678186 + )); +#494 = CARTESIAN_POINT('',(1.783455757201,-5.412787571063,2.448343678186 + )); +#495 = CARTESIAN_POINT('',(-0.979835144048,-5.200671926903, + 2.448343678186)); +#496 = CARTESIAN_POINT('',(-2.987855509252,-3.819539340077, + 2.448343678186)); +#497 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 2.448343678186)); +#498 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#499 = SURFACE_OF_REVOLUTION('',#500,#505); +#500 = CIRCLE('',#501,0.4); +#501 = AXIS2_PLACEMENT_3D('',#502,#503,#504); +#502 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.05)); +#503 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#504 = DIRECTION('',(0.,0.,-1.)); +#505 = AXIS1_PLACEMENT('',#506,#507); +#506 = CARTESIAN_POINT('',(0.,0.,0.65)); +#507 = DIRECTION('',(-0.,0.,-1.)); +#508 = ADVANCED_FACE('',(#509),#582,.F.); +#509 = FACE_BOUND('',#510,.F.); +#510 = EDGE_LOOP('',(#511,#521,#529,#537,#543,#544,#552,#560,#568,#576) + ); +#511 = ORIENTED_EDGE('',*,*,#512,.F.); +#512 = EDGE_CURVE('',#513,#515,#517,.T.); +#513 = VERTEX_POINT('',#514); +#514 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#515 = VERTEX_POINT('',#516); +#516 = CARTESIAN_POINT('',(-4.15,0.325,0.15)); +#517 = LINE('',#518,#519); +#518 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#519 = VECTOR('',#520,1.); +#520 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#521 = ORIENTED_EDGE('',*,*,#522,.T.); +#522 = EDGE_CURVE('',#513,#523,#525,.T.); +#523 = VERTEX_POINT('',#524); +#524 = CARTESIAN_POINT('',(-4.15,3.15,0.85)); +#525 = LINE('',#526,#527); +#526 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#527 = VECTOR('',#528,1.); +#528 = DIRECTION('',(0.,0.,1.)); +#529 = ORIENTED_EDGE('',*,*,#530,.T.); +#530 = EDGE_CURVE('',#523,#531,#533,.T.); +#531 = VERTEX_POINT('',#532); +#532 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.85)); +#533 = LINE('',#534,#535); +#534 = CARTESIAN_POINT('',(-4.15,4.15,0.85)); +#535 = VECTOR('',#536,1.); +#536 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#537 = ORIENTED_EDGE('',*,*,#538,.T.); +#538 = EDGE_CURVE('',#531,#394,#539,.T.); +#539 = LINE('',#540,#541); +#540 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.65)); +#541 = VECTOR('',#542,1.); +#542 = DIRECTION('',(0.,0.,-1.)); +#543 = ORIENTED_EDGE('',*,*,#393,.T.); +#544 = ORIENTED_EDGE('',*,*,#545,.F.); +#545 = EDGE_CURVE('',#546,#396,#548,.T.); +#546 = VERTEX_POINT('',#547); +#547 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.85)); +#548 = LINE('',#549,#550); +#549 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.65)); +#550 = VECTOR('',#551,1.); +#551 = DIRECTION('',(0.,0.,-1.)); +#552 = ORIENTED_EDGE('',*,*,#553,.T.); +#553 = EDGE_CURVE('',#546,#554,#556,.T.); +#554 = VERTEX_POINT('',#555); +#555 = CARTESIAN_POINT('',(-4.15,-3.15,0.85)); +#556 = LINE('',#557,#558); +#557 = CARTESIAN_POINT('',(-4.15,4.15,0.85)); +#558 = VECTOR('',#559,1.); +#559 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#560 = ORIENTED_EDGE('',*,*,#561,.F.); +#561 = EDGE_CURVE('',#562,#554,#564,.T.); +#562 = VERTEX_POINT('',#563); +#563 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#564 = LINE('',#565,#566); +#565 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#566 = VECTOR('',#567,1.); +#567 = DIRECTION('',(0.,0.,1.)); +#568 = ORIENTED_EDGE('',*,*,#569,.F.); +#569 = EDGE_CURVE('',#570,#562,#572,.T.); +#570 = VERTEX_POINT('',#571); +#571 = CARTESIAN_POINT('',(-4.15,-0.325,0.15)); +#572 = LINE('',#573,#574); +#573 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#574 = VECTOR('',#575,1.); +#575 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#576 = ORIENTED_EDGE('',*,*,#577,.F.); +#577 = EDGE_CURVE('',#515,#570,#578,.T.); +#578 = LINE('',#579,#580); +#579 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#580 = VECTOR('',#581,1.); +#581 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#582 = PLANE('',#583); +#583 = AXIS2_PLACEMENT_3D('',#584,#585,#586); +#584 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#585 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#586 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#587 = ADVANCED_FACE('',(#588),#607,.F.); +#588 = FACE_BOUND('',#589,.F.); +#589 = EDGE_LOOP('',(#590,#598,#599,#600)); +#590 = ORIENTED_EDGE('',*,*,#591,.T.); +#591 = EDGE_CURVE('',#592,#447,#594,.T.); +#592 = VERTEX_POINT('',#593); +#593 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.85)); +#594 = LINE('',#595,#596); +#595 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.65)); +#596 = VECTOR('',#597,1.); +#597 = DIRECTION('',(0.,0.,-1.)); +#598 = ORIENTED_EDGE('',*,*,#454,.T.); +#599 = ORIENTED_EDGE('',*,*,#538,.F.); +#600 = ORIENTED_EDGE('',*,*,#601,.T.); +#601 = EDGE_CURVE('',#531,#592,#602,.T.); +#602 = CIRCLE('',#603,4.2); +#603 = AXIS2_PLACEMENT_3D('',#604,#605,#606); +#604 = CARTESIAN_POINT('',(0.,0.,0.85)); +#605 = DIRECTION('',(0.,0.,-1.)); +#606 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#607 = CYLINDRICAL_SURFACE('',#608,4.2); +#608 = AXIS2_PLACEMENT_3D('',#609,#610,#611); +#609 = CARTESIAN_POINT('',(0.,0.,0.65)); +#610 = DIRECTION('',(0.,0.,-1.)); +#611 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#612 = ADVANCED_FACE('',(#613),#632,.F.); +#613 = FACE_BOUND('',#614,.F.); +#614 = EDGE_LOOP('',(#615,#623,#630,#631)); +#615 = ORIENTED_EDGE('',*,*,#616,.F.); +#616 = EDGE_CURVE('',#617,#404,#619,.T.); +#617 = VERTEX_POINT('',#618); +#618 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.85)); +#619 = LINE('',#620,#621); +#620 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.65)); +#621 = VECTOR('',#622,1.); +#622 = DIRECTION('',(0.,0.,-1.)); +#623 = ORIENTED_EDGE('',*,*,#624,.T.); +#624 = EDGE_CURVE('',#617,#546,#625,.T.); +#625 = CIRCLE('',#626,4.2); +#626 = AXIS2_PLACEMENT_3D('',#627,#628,#629); +#627 = CARTESIAN_POINT('',(0.,0.,0.85)); +#628 = DIRECTION('',(0.,0.,-1.)); +#629 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#630 = ORIENTED_EDGE('',*,*,#545,.T.); +#631 = ORIENTED_EDGE('',*,*,#403,.T.); +#632 = CYLINDRICAL_SURFACE('',#633,4.2); +#633 = AXIS2_PLACEMENT_3D('',#634,#635,#636); +#634 = CARTESIAN_POINT('',(0.,0.,0.65)); +#635 = DIRECTION('',(0.,0.,-1.)); +#636 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#637 = ADVANCED_FACE('',(#638),#688,.F.); +#638 = FACE_BOUND('',#639,.F.); +#639 = EDGE_LOOP('',(#640,#650,#658,#666,#672,#673,#674,#682)); +#640 = ORIENTED_EDGE('',*,*,#641,.F.); +#641 = EDGE_CURVE('',#642,#644,#646,.T.); +#642 = VERTEX_POINT('',#643); +#643 = CARTESIAN_POINT('',(3.75,4.15,0.15)); +#644 = VERTEX_POINT('',#645); +#645 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#646 = LINE('',#647,#648); +#647 = CARTESIAN_POINT('',(4.15,4.15,0.15)); +#648 = VECTOR('',#649,1.); +#649 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#650 = ORIENTED_EDGE('',*,*,#651,.T.); +#651 = EDGE_CURVE('',#642,#652,#654,.T.); +#652 = VERTEX_POINT('',#653); +#653 = CARTESIAN_POINT('',(3.75,4.15,1.15)); +#654 = LINE('',#655,#656); +#655 = CARTESIAN_POINT('',(3.75,4.15,0.15)); +#656 = VECTOR('',#657,1.); +#657 = DIRECTION('',(0.,0.,1.)); +#658 = ORIENTED_EDGE('',*,*,#659,.T.); +#659 = EDGE_CURVE('',#652,#660,#662,.T.); +#660 = VERTEX_POINT('',#661); +#661 = CARTESIAN_POINT('',(0.646142399166,4.15,1.15)); +#662 = LINE('',#663,#664); +#663 = CARTESIAN_POINT('',(4.15,4.15,1.15)); +#664 = VECTOR('',#665,1.); +#665 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#666 = ORIENTED_EDGE('',*,*,#667,.T.); +#667 = EDGE_CURVE('',#660,#438,#668,.T.); +#668 = LINE('',#669,#670); +#669 = CARTESIAN_POINT('',(0.646142399166,4.15,0.65)); +#670 = VECTOR('',#671,1.); +#671 = DIRECTION('',(0.,0.,-1.)); +#672 = ORIENTED_EDGE('',*,*,#446,.T.); +#673 = ORIENTED_EDGE('',*,*,#591,.F.); +#674 = ORIENTED_EDGE('',*,*,#675,.T.); +#675 = EDGE_CURVE('',#592,#676,#678,.T.); +#676 = VERTEX_POINT('',#677); +#677 = CARTESIAN_POINT('',(-3.15,4.15,0.85)); +#678 = LINE('',#679,#680); +#679 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#680 = VECTOR('',#681,1.); +#681 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#682 = ORIENTED_EDGE('',*,*,#683,.F.); +#683 = EDGE_CURVE('',#644,#676,#684,.T.); +#684 = LINE('',#685,#686); +#685 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#686 = VECTOR('',#687,1.); +#687 = DIRECTION('',(0.,0.,1.)); +#688 = PLANE('',#689); +#689 = AXIS2_PLACEMENT_3D('',#690,#691,#692); +#690 = CARTESIAN_POINT('',(4.15,4.15,0.15)); +#691 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#692 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#693 = ADVANCED_FACE('',(#694),#744,.F.); +#694 = FACE_BOUND('',#695,.F.); +#695 = EDGE_LOOP('',(#696,#706,#714,#722,#728,#729,#730,#738)); +#696 = ORIENTED_EDGE('',*,*,#697,.F.); +#697 = EDGE_CURVE('',#698,#700,#702,.T.); +#698 = VERTEX_POINT('',#699); +#699 = CARTESIAN_POINT('',(3.75,-4.15,0.15)); +#700 = VERTEX_POINT('',#701); +#701 = CARTESIAN_POINT('',(3.75,-4.15,1.15)); +#702 = LINE('',#703,#704); +#703 = CARTESIAN_POINT('',(3.75,-4.15,0.15)); +#704 = VECTOR('',#705,1.); +#705 = DIRECTION('',(0.,0.,1.)); +#706 = ORIENTED_EDGE('',*,*,#707,.F.); +#707 = EDGE_CURVE('',#708,#698,#710,.T.); +#708 = VERTEX_POINT('',#709); +#709 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#710 = LINE('',#711,#712); +#711 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#712 = VECTOR('',#713,1.); +#713 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#714 = ORIENTED_EDGE('',*,*,#715,.T.); +#715 = EDGE_CURVE('',#708,#716,#718,.T.); +#716 = VERTEX_POINT('',#717); +#717 = CARTESIAN_POINT('',(-3.15,-4.15,0.85)); +#718 = LINE('',#719,#720); +#719 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#720 = VECTOR('',#721,1.); +#721 = DIRECTION('',(0.,0.,1.)); +#722 = ORIENTED_EDGE('',*,*,#723,.F.); +#723 = EDGE_CURVE('',#617,#716,#724,.T.); +#724 = LINE('',#725,#726); +#725 = CARTESIAN_POINT('',(-5.082284216462E-16,-4.15,0.85)); +#726 = VECTOR('',#727,1.); +#727 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#728 = ORIENTED_EDGE('',*,*,#616,.T.); +#729 = ORIENTED_EDGE('',*,*,#412,.T.); +#730 = ORIENTED_EDGE('',*,*,#731,.F.); +#731 = EDGE_CURVE('',#732,#413,#734,.T.); +#732 = VERTEX_POINT('',#733); +#733 = CARTESIAN_POINT('',(0.646142399166,-4.15,1.15)); +#734 = LINE('',#735,#736); +#735 = CARTESIAN_POINT('',(0.646142399166,-4.15,0.65)); +#736 = VECTOR('',#737,1.); +#737 = DIRECTION('',(0.,0.,-1.)); +#738 = ORIENTED_EDGE('',*,*,#739,.T.); +#739 = EDGE_CURVE('',#732,#700,#740,.T.); +#740 = LINE('',#741,#742); +#741 = CARTESIAN_POINT('',(-3.15,-4.15,1.15)); +#742 = VECTOR('',#743,1.); +#743 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#744 = PLANE('',#745); +#745 = AXIS2_PLACEMENT_3D('',#746,#747,#748); +#746 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#747 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#748 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#749 = ADVANCED_FACE('',(#750),#769,.F.); +#750 = FACE_BOUND('',#751,.F.); +#751 = EDGE_LOOP('',(#752,#761,#767,#768)); +#752 = ORIENTED_EDGE('',*,*,#753,.F.); +#753 = EDGE_CURVE('',#754,#660,#756,.T.); +#754 = VERTEX_POINT('',#755); +#755 = CARTESIAN_POINT('',(4.15,0.646142399166,1.15)); +#756 = CIRCLE('',#757,4.2); +#757 = AXIS2_PLACEMENT_3D('',#758,#759,#760); +#758 = CARTESIAN_POINT('',(0.,0.,1.15)); +#759 = DIRECTION('',(0.,0.,1.)); +#760 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#761 = ORIENTED_EDGE('',*,*,#762,.T.); +#762 = EDGE_CURVE('',#754,#430,#763,.T.); +#763 = LINE('',#764,#765); +#764 = CARTESIAN_POINT('',(4.15,0.646142399166,0.65)); +#765 = VECTOR('',#766,1.); +#766 = DIRECTION('',(0.,0.,-1.)); +#767 = ORIENTED_EDGE('',*,*,#437,.T.); +#768 = ORIENTED_EDGE('',*,*,#667,.F.); +#769 = CYLINDRICAL_SURFACE('',#770,4.2); +#770 = AXIS2_PLACEMENT_3D('',#771,#772,#773); +#771 = CARTESIAN_POINT('',(0.,0.,0.65)); +#772 = DIRECTION('',(0.,0.,-1.)); +#773 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#774 = ADVANCED_FACE('',(#775),#794,.F.); +#775 = FACE_BOUND('',#776,.F.); +#776 = EDGE_LOOP('',(#777,#785,#792,#793)); +#777 = ORIENTED_EDGE('',*,*,#778,.F.); +#778 = EDGE_CURVE('',#779,#421,#781,.T.); +#779 = VERTEX_POINT('',#780); +#780 = CARTESIAN_POINT('',(4.15,-0.646142399166,1.15)); +#781 = LINE('',#782,#783); +#782 = CARTESIAN_POINT('',(4.15,-0.646142399166,0.65)); +#783 = VECTOR('',#784,1.); +#784 = DIRECTION('',(0.,0.,-1.)); +#785 = ORIENTED_EDGE('',*,*,#786,.F.); +#786 = EDGE_CURVE('',#732,#779,#787,.T.); +#787 = CIRCLE('',#788,4.2); +#788 = AXIS2_PLACEMENT_3D('',#789,#790,#791); +#789 = CARTESIAN_POINT('',(0.,0.,1.15)); +#790 = DIRECTION('',(0.,0.,1.)); +#791 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#792 = ORIENTED_EDGE('',*,*,#731,.T.); +#793 = ORIENTED_EDGE('',*,*,#420,.T.); +#794 = CYLINDRICAL_SURFACE('',#795,4.2); +#795 = AXIS2_PLACEMENT_3D('',#796,#797,#798); +#796 = CARTESIAN_POINT('',(0.,0.,0.65)); +#797 = DIRECTION('',(0.,0.,-1.)); +#798 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#799 = ADVANCED_FACE('',(#800),#859,.F.); +#800 = FACE_BOUND('',#801,.F.); +#801 = EDGE_LOOP('',(#802,#812,#820,#826,#827,#828,#829,#837,#845,#853) + ); +#802 = ORIENTED_EDGE('',*,*,#803,.F.); +#803 = EDGE_CURVE('',#804,#806,#808,.T.); +#804 = VERTEX_POINT('',#805); +#805 = CARTESIAN_POINT('',(4.15,-3.75,0.15)); +#806 = VERTEX_POINT('',#807); +#807 = CARTESIAN_POINT('',(4.15,-0.325,0.15)); +#808 = LINE('',#809,#810); +#809 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#810 = VECTOR('',#811,1.); +#811 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#812 = ORIENTED_EDGE('',*,*,#813,.T.); +#813 = EDGE_CURVE('',#804,#814,#816,.T.); +#814 = VERTEX_POINT('',#815); +#815 = CARTESIAN_POINT('',(4.15,-3.75,1.15)); +#816 = LINE('',#817,#818); +#817 = CARTESIAN_POINT('',(4.15,-3.75,0.15)); +#818 = VECTOR('',#819,1.); +#819 = DIRECTION('',(0.,0.,1.)); +#820 = ORIENTED_EDGE('',*,*,#821,.T.); +#821 = EDGE_CURVE('',#814,#779,#822,.T.); +#822 = LINE('',#823,#824); +#823 = CARTESIAN_POINT('',(4.15,-4.15,1.15)); +#824 = VECTOR('',#825,1.); +#825 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#826 = ORIENTED_EDGE('',*,*,#778,.T.); +#827 = ORIENTED_EDGE('',*,*,#429,.T.); +#828 = ORIENTED_EDGE('',*,*,#762,.F.); +#829 = ORIENTED_EDGE('',*,*,#830,.T.); +#830 = EDGE_CURVE('',#754,#831,#833,.T.); +#831 = VERTEX_POINT('',#832); +#832 = CARTESIAN_POINT('',(4.15,3.75,1.15)); +#833 = LINE('',#834,#835); +#834 = CARTESIAN_POINT('',(4.15,-4.15,1.15)); +#835 = VECTOR('',#836,1.); +#836 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#837 = ORIENTED_EDGE('',*,*,#838,.F.); +#838 = EDGE_CURVE('',#839,#831,#841,.T.); +#839 = VERTEX_POINT('',#840); +#840 = CARTESIAN_POINT('',(4.15,3.75,0.15)); +#841 = LINE('',#842,#843); +#842 = CARTESIAN_POINT('',(4.15,3.75,0.15)); +#843 = VECTOR('',#844,1.); +#844 = DIRECTION('',(0.,0.,1.)); +#845 = ORIENTED_EDGE('',*,*,#846,.F.); +#846 = EDGE_CURVE('',#847,#839,#849,.T.); +#847 = VERTEX_POINT('',#848); +#848 = CARTESIAN_POINT('',(4.15,0.325,0.15)); +#849 = LINE('',#850,#851); +#850 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#851 = VECTOR('',#852,1.); +#852 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#853 = ORIENTED_EDGE('',*,*,#854,.F.); +#854 = EDGE_CURVE('',#806,#847,#855,.T.); +#855 = LINE('',#856,#857); +#856 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#857 = VECTOR('',#858,1.); +#858 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#859 = PLANE('',#860); +#860 = AXIS2_PLACEMENT_3D('',#861,#862,#863); +#861 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#862 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#863 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#864 = ADVANCED_FACE('',(#865),#894,.T.); +#865 = FACE_BOUND('',#866,.T.); +#866 = EDGE_LOOP('',(#867,#875,#892,#893)); +#867 = ORIENTED_EDGE('',*,*,#868,.T.); +#868 = EDGE_CURVE('',#473,#869,#871,.T.); +#869 = VERTEX_POINT('',#870); +#870 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#871 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#872,#873,#874), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +25.132741228718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#872 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#873 = CARTESIAN_POINT('',(-4.,1.567121998241E-15,2.451663208837)); +#874 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#875 = ORIENTED_EDGE('',*,*,#876,.T.); +#876 = EDGE_CURVE('',#869,#869,#877,.T.); +#877 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#878,#879,#880,#881,#882, + #883,#884,#885,#886,#887,#888,#889,#890,#891),.UNSPECIFIED.,.T.,.F.) + B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-25.13274122871, + 4.970488814277E-16,25.132741228718,50.265482457436),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1., + 1.000000000001,0.999999999997,1.000000000006,0.999999999991, + 1.000000000009,0.999999999992,1.000000000006,0.999999999996, +1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') ); +#878 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#879 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822,2.488178046004 + )); +#880 = CARTESIAN_POINT('',(-3.015267027678,3.854580985394,2.488178046004 + )); +#881 = CARTESIAN_POINT('',(-0.988824457307,5.24838451341,2.488178046004) + ); +#882 = CARTESIAN_POINT('',(1.799817736619,5.462446172587,2.488178046004) + ); +#883 = CARTESIAN_POINT('',(4.208872671035,3.976872241643,2.488178046004) + ); +#884 = CARTESIAN_POINT('',(5.975661405969,1.808266193148,2.488178046005) + ); +#885 = CARTESIAN_POINT('',(5.975661406074,-1.808266193179,2.488178046004 + )); +#886 = CARTESIAN_POINT('',(4.208872670975,-3.976872241589,2.488178046004 + )); +#887 = CARTESIAN_POINT('',(1.799817736635,-5.462446172635,2.488178046004 + )); +#888 = CARTESIAN_POINT('',(-0.988824457302,-5.248384513387, + 2.488178046004)); +#889 = CARTESIAN_POINT('',(-3.015267027684,-3.8545809854,2.488178046004) + ); +#890 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.488178046004)); +#891 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#892 = ORIENTED_EDGE('',*,*,#868,.F.); +#893 = ORIENTED_EDGE('',*,*,#483,.F.); +#894 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#895,#896,#897,#898,#899,#900,#901,#902,#903,#904,#905,#906,#907 + ,#908) + ,(#909,#910,#911,#912,#913,#914,#915,#916,#917,#918,#919,#920,#921 + ,#922) + ,(#923,#924,#925,#926,#927,#928,#929,#930,#931,#932,#933,#934,#935 +,#936 + )),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1, + 13,13,1),(0.,25.132741228718),(-25.13274122871,4.970488814277E-16, + 25.132741228718,50.265482457436),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 + ,1.000000000002,0.999999999999,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945877,0.738548945873 + ,0.738548945881,0.738548945869,0.738548945884,0.738548945869 + ,0.738548945881,0.738548945873,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 +,1.000000000002,0.999999999999,1.,1. + ))) REPRESENTATION_ITEM('') SURFACE() ); +#895 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#896 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015,2.448343678186 + )); +#897 = CARTESIAN_POINT('',(-2.987855509242,3.819539340071,2.448343678186 + )); +#898 = CARTESIAN_POINT('',(-0.979835144066,5.200671926926,2.448343678186 + )); +#899 = CARTESIAN_POINT('',(1.783455757208,5.412787571015,2.448343678186) + ); +#900 = CARTESIAN_POINT('',(4.170610192189,3.940718857633,2.448343678186) + ); +#901 = CARTESIAN_POINT('',(5.921337211392,1.791827409569,2.448343678186) + ); +#902 = CARTESIAN_POINT('',(5.921337211452,-1.791827409599,2.448343678186 + )); +#903 = CARTESIAN_POINT('',(4.170610192165,-3.940718857579,2.448343678186 + )); +#904 = CARTESIAN_POINT('',(1.783455757201,-5.412787571063,2.448343678186 + )); +#905 = CARTESIAN_POINT('',(-0.979835144048,-5.200671926903, + 2.448343678186)); +#906 = CARTESIAN_POINT('',(-2.987855509252,-3.819539340077, + 2.448343678186)); +#907 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 2.448343678186)); +#908 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.448343678186)); +#909 = CARTESIAN_POINT('',(-4.,1.567121998241E-15,2.451663208837)); +#910 = CARTESIAN_POINT('',(-4.000000000002,1.905321418822,2.451663208837 + )); +#911 = CARTESIAN_POINT('',(-3.015267027676,3.854580985393,2.451663208837 + )); +#912 = CARTESIAN_POINT('',(-0.988824457311,5.248384513412,2.451663208837 + )); +#913 = CARTESIAN_POINT('',(1.799817736624,5.462446172583,2.451663208837) + ); +#914 = CARTESIAN_POINT('',(4.20887267103,3.976872241648,2.451663208837) + ); +#915 = CARTESIAN_POINT('',(5.975661405974,1.808266193145,2.451663208837) + ); +#916 = CARTESIAN_POINT('',(5.97566140607,-1.808266193178,2.451663208837) + ); +#917 = CARTESIAN_POINT('',(4.208872670981,-3.97687224159,2.451663208837) + ); +#918 = CARTESIAN_POINT('',(1.799817736631,-5.462446172635,2.451663208837 + )); +#919 = CARTESIAN_POINT('',(-0.988824457299,-5.248384513388, + 2.451663208837)); +#920 = CARTESIAN_POINT('',(-3.015267027685,-3.854580985399, + 2.451663208837)); +#921 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.451663208837)); +#922 = CARTESIAN_POINT('',(-4.,1.567121998241E-15,2.451663208837)); +#923 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#924 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822,2.488178046004 + )); +#925 = CARTESIAN_POINT('',(-3.015267027678,3.854580985394,2.488178046004 + )); +#926 = CARTESIAN_POINT('',(-0.988824457307,5.24838451341,2.488178046004) + ); +#927 = CARTESIAN_POINT('',(1.799817736619,5.462446172587,2.488178046004) + ); +#928 = CARTESIAN_POINT('',(4.208872671035,3.976872241643,2.488178046004) + ); +#929 = CARTESIAN_POINT('',(5.975661405969,1.808266193148,2.488178046005) + ); +#930 = CARTESIAN_POINT('',(5.975661406074,-1.808266193179,2.488178046004 + )); +#931 = CARTESIAN_POINT('',(4.208872670975,-3.976872241589,2.488178046004 + )); +#932 = CARTESIAN_POINT('',(1.799817736635,-5.462446172635,2.488178046004 + )); +#933 = CARTESIAN_POINT('',(-0.988824457302,-5.248384513387, + 2.488178046004)); +#934 = CARTESIAN_POINT('',(-3.015267027684,-3.8545809854,2.488178046004) + ); +#935 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.488178046004)); +#936 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.488178046004)); +#937 = ADVANCED_FACE('',(#938),#1018,.F.); +#938 = FACE_BOUND('',#939,.F.); +#939 = EDGE_LOOP('',(#940,#947,#948,#956,#965,#971,#972,#979,#980,#986, + #987,#995,#1004,#1010,#1011,#1017)); +#940 = ORIENTED_EDGE('',*,*,#941,.F.); +#941 = EDGE_CURVE('',#804,#698,#942,.T.); +#942 = CIRCLE('',#943,0.4); +#943 = AXIS2_PLACEMENT_3D('',#944,#945,#946); +#944 = CARTESIAN_POINT('',(3.75,-3.75,0.15)); +#945 = DIRECTION('',(0.,0.,-1.)); +#946 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#947 = ORIENTED_EDGE('',*,*,#803,.T.); +#948 = ORIENTED_EDGE('',*,*,#949,.F.); +#949 = EDGE_CURVE('',#950,#806,#952,.T.); +#950 = VERTEX_POINT('',#951); +#951 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#952 = LINE('',#953,#954); +#953 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#954 = VECTOR('',#955,1.); +#955 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#956 = ORIENTED_EDGE('',*,*,#957,.F.); +#957 = EDGE_CURVE('',#958,#950,#960,.T.); +#958 = VERTEX_POINT('',#959); +#959 = CARTESIAN_POINT('',(1.425,0.325,0.15)); +#960 = CIRCLE('',#961,0.325); +#961 = AXIS2_PLACEMENT_3D('',#962,#963,#964); +#962 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.15)); +#963 = DIRECTION('',(0.,0.,1.)); +#964 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#965 = ORIENTED_EDGE('',*,*,#966,.F.); +#966 = EDGE_CURVE('',#847,#958,#967,.T.); +#967 = LINE('',#968,#969); +#968 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#969 = VECTOR('',#970,1.); +#970 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#971 = ORIENTED_EDGE('',*,*,#846,.T.); +#972 = ORIENTED_EDGE('',*,*,#973,.F.); +#973 = EDGE_CURVE('',#642,#839,#974,.T.); +#974 = CIRCLE('',#975,0.4); +#975 = AXIS2_PLACEMENT_3D('',#976,#977,#978); +#976 = CARTESIAN_POINT('',(3.75,3.75,0.15)); +#977 = DIRECTION('',(0.,0.,-1.)); +#978 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#979 = ORIENTED_EDGE('',*,*,#641,.T.); +#980 = ORIENTED_EDGE('',*,*,#981,.T.); +#981 = EDGE_CURVE('',#644,#513,#982,.T.); +#982 = LINE('',#983,#984); +#983 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#984 = VECTOR('',#985,1.); +#985 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#986 = ORIENTED_EDGE('',*,*,#512,.T.); +#987 = ORIENTED_EDGE('',*,*,#988,.F.); +#988 = EDGE_CURVE('',#989,#515,#991,.T.); +#989 = VERTEX_POINT('',#990); +#990 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#991 = LINE('',#992,#993); +#992 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#993 = VECTOR('',#994,1.); +#994 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#995 = ORIENTED_EDGE('',*,*,#996,.F.); +#996 = EDGE_CURVE('',#997,#989,#999,.T.); +#997 = VERTEX_POINT('',#998); +#998 = CARTESIAN_POINT('',(-1.425,-0.325,0.15)); +#999 = CIRCLE('',#1000,0.325); +#1000 = AXIS2_PLACEMENT_3D('',#1001,#1002,#1003); +#1001 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.15)); +#1002 = DIRECTION('',(-0.,0.,1.)); +#1003 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#1004 = ORIENTED_EDGE('',*,*,#1005,.F.); +#1005 = EDGE_CURVE('',#570,#997,#1006,.T.); +#1006 = LINE('',#1007,#1008); +#1007 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#1008 = VECTOR('',#1009,1.); +#1009 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1010 = ORIENTED_EDGE('',*,*,#569,.T.); +#1011 = ORIENTED_EDGE('',*,*,#1012,.T.); +#1012 = EDGE_CURVE('',#562,#708,#1013,.T.); +#1013 = LINE('',#1014,#1015); +#1014 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#1015 = VECTOR('',#1016,1.); +#1016 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#1017 = ORIENTED_EDGE('',*,*,#707,.T.); +#1018 = PLANE('',#1019); +#1019 = AXIS2_PLACEMENT_3D('',#1020,#1021,#1022); +#1020 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,0.15)); +#1021 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#1022 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#1023 = ADVANCED_FACE('',(#1024),#1035,.F.); +#1024 = FACE_BOUND('',#1025,.F.); +#1025 = EDGE_LOOP('',(#1026,#1027,#1028,#1034)); +#1026 = ORIENTED_EDGE('',*,*,#981,.F.); +#1027 = ORIENTED_EDGE('',*,*,#683,.T.); +#1028 = ORIENTED_EDGE('',*,*,#1029,.T.); +#1029 = EDGE_CURVE('',#676,#523,#1030,.T.); +#1030 = LINE('',#1031,#1032); +#1031 = CARTESIAN_POINT('',(-2.3625,4.9375,0.85)); +#1032 = VECTOR('',#1033,1.); +#1033 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#1034 = ORIENTED_EDGE('',*,*,#522,.F.); +#1035 = PLANE('',#1036); +#1036 = AXIS2_PLACEMENT_3D('',#1037,#1038,#1039); +#1037 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#1038 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#1039 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#1040 = ADVANCED_FACE('',(#1041),#1066,.T.); +#1041 = FACE_BOUND('',#1042,.T.); +#1042 = EDGE_LOOP('',(#1043,#1051,#1059,#1065)); +#1043 = ORIENTED_EDGE('',*,*,#1044,.T.); +#1044 = EDGE_CURVE('',#515,#1045,#1047,.T.); +#1045 = VERTEX_POINT('',#1046); +#1046 = CARTESIAN_POINT('',(-4.75,0.325,0.15)); +#1047 = LINE('',#1048,#1049); +#1048 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#1049 = VECTOR('',#1050,1.); +#1050 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#1051 = ORIENTED_EDGE('',*,*,#1052,.T.); +#1052 = EDGE_CURVE('',#1045,#1053,#1055,.T.); +#1053 = VERTEX_POINT('',#1054); +#1054 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#1055 = LINE('',#1056,#1057); +#1056 = CARTESIAN_POINT('',(-4.75,0.325,0.15)); +#1057 = VECTOR('',#1058,1.); +#1058 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1059 = ORIENTED_EDGE('',*,*,#1060,.T.); +#1060 = EDGE_CURVE('',#1053,#570,#1061,.T.); +#1061 = LINE('',#1062,#1063); +#1062 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#1063 = VECTOR('',#1064,1.); +#1064 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1065 = ORIENTED_EDGE('',*,*,#577,.F.); +#1066 = PLANE('',#1067); +#1067 = AXIS2_PLACEMENT_3D('',#1068,#1069,#1070); +#1068 = CARTESIAN_POINT('',(-3.000096934556,3.808225032462E-16,0.15)); +#1069 = DIRECTION('',(0.,0.,1.)); +#1070 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1071 = ADVANCED_FACE('',(#1072),#1078,.T.); +#1072 = FACE_BOUND('',#1073,.T.); +#1073 = EDGE_LOOP('',(#1074,#1075,#1076,#1077)); +#1074 = ORIENTED_EDGE('',*,*,#601,.T.); +#1075 = ORIENTED_EDGE('',*,*,#675,.T.); +#1076 = ORIENTED_EDGE('',*,*,#1029,.T.); +#1077 = ORIENTED_EDGE('',*,*,#530,.T.); +#1078 = PLANE('',#1079); +#1079 = AXIS2_PLACEMENT_3D('',#1080,#1081,#1082); +#1080 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#1081 = DIRECTION('',(0.,0.,1.)); +#1082 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1083 = ADVANCED_FACE('',(#1084),#1095,.F.); +#1084 = FACE_BOUND('',#1085,.F.); +#1085 = EDGE_LOOP('',(#1086,#1087,#1088,#1094)); +#1086 = ORIENTED_EDGE('',*,*,#1012,.F.); +#1087 = ORIENTED_EDGE('',*,*,#561,.T.); +#1088 = ORIENTED_EDGE('',*,*,#1089,.T.); +#1089 = EDGE_CURVE('',#554,#716,#1090,.T.); +#1090 = LINE('',#1091,#1092); +#1091 = CARTESIAN_POINT('',(-4.9375,-2.3625,0.85)); +#1092 = VECTOR('',#1093,1.); +#1093 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#1094 = ORIENTED_EDGE('',*,*,#715,.F.); +#1095 = PLANE('',#1096); +#1096 = AXIS2_PLACEMENT_3D('',#1097,#1098,#1099); +#1097 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#1098 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#1099 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#1100 = ADVANCED_FACE('',(#1101),#1107,.T.); +#1101 = FACE_BOUND('',#1102,.T.); +#1102 = EDGE_LOOP('',(#1103,#1104,#1105,#1106)); +#1103 = ORIENTED_EDGE('',*,*,#723,.F.); +#1104 = ORIENTED_EDGE('',*,*,#624,.T.); +#1105 = ORIENTED_EDGE('',*,*,#553,.T.); +#1106 = ORIENTED_EDGE('',*,*,#1089,.T.); +#1107 = PLANE('',#1108); +#1108 = AXIS2_PLACEMENT_3D('',#1109,#1110,#1111); +#1109 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#1110 = DIRECTION('',(0.,0.,1.)); +#1111 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1112 = ADVANCED_FACE('',(#1113),#1125,.T.); +#1113 = FACE_BOUND('',#1114,.T.); +#1114 = EDGE_LOOP('',(#1115,#1116,#1117,#1124)); +#1115 = ORIENTED_EDGE('',*,*,#753,.F.); +#1116 = ORIENTED_EDGE('',*,*,#830,.T.); +#1117 = ORIENTED_EDGE('',*,*,#1118,.F.); +#1118 = EDGE_CURVE('',#652,#831,#1119,.T.); +#1119 = CIRCLE('',#1120,0.4); +#1120 = AXIS2_PLACEMENT_3D('',#1121,#1122,#1123); +#1121 = CARTESIAN_POINT('',(3.75,3.75,1.15)); +#1122 = DIRECTION('',(0.,0.,-1.)); +#1123 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1124 = ORIENTED_EDGE('',*,*,#659,.T.); +#1125 = PLANE('',#1126); +#1126 = AXIS2_PLACEMENT_3D('',#1127,#1128,#1129); +#1127 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,1.15)); +#1128 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#1129 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#1130 = ADVANCED_FACE('',(#1131),#1137,.T.); +#1131 = FACE_BOUND('',#1132,.T.); +#1132 = EDGE_LOOP('',(#1133,#1134,#1135,#1136)); +#1133 = ORIENTED_EDGE('',*,*,#651,.T.); +#1134 = ORIENTED_EDGE('',*,*,#1118,.T.); +#1135 = ORIENTED_EDGE('',*,*,#838,.F.); +#1136 = ORIENTED_EDGE('',*,*,#973,.F.); +#1137 = CYLINDRICAL_SURFACE('',#1138,0.4); +#1138 = AXIS2_PLACEMENT_3D('',#1139,#1140,#1141); +#1139 = CARTESIAN_POINT('',(3.75,3.75,0.15)); +#1140 = DIRECTION('',(0.,0.,1.)); +#1141 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#1142 = ADVANCED_FACE('',(#1143),#1155,.T.); +#1143 = FACE_BOUND('',#1144,.T.); +#1144 = EDGE_LOOP('',(#1145,#1146,#1153,#1154)); +#1145 = ORIENTED_EDGE('',*,*,#813,.T.); +#1146 = ORIENTED_EDGE('',*,*,#1147,.T.); +#1147 = EDGE_CURVE('',#814,#700,#1148,.T.); +#1148 = CIRCLE('',#1149,0.4); +#1149 = AXIS2_PLACEMENT_3D('',#1150,#1151,#1152); +#1150 = CARTESIAN_POINT('',(3.75,-3.75,1.15)); +#1151 = DIRECTION('',(0.,0.,-1.)); +#1152 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1153 = ORIENTED_EDGE('',*,*,#697,.F.); +#1154 = ORIENTED_EDGE('',*,*,#941,.F.); +#1155 = CYLINDRICAL_SURFACE('',#1156,0.4); +#1156 = AXIS2_PLACEMENT_3D('',#1157,#1158,#1159); +#1157 = CARTESIAN_POINT('',(3.75,-3.75,0.15)); +#1158 = DIRECTION('',(0.,0.,1.)); +#1159 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1160 = ADVANCED_FACE('',(#1161),#1167,.T.); +#1161 = FACE_BOUND('',#1162,.T.); +#1162 = EDGE_LOOP('',(#1163,#1164,#1165,#1166)); +#1163 = ORIENTED_EDGE('',*,*,#1147,.F.); +#1164 = ORIENTED_EDGE('',*,*,#821,.T.); +#1165 = ORIENTED_EDGE('',*,*,#786,.F.); +#1166 = ORIENTED_EDGE('',*,*,#739,.T.); +#1167 = PLANE('',#1168); +#1168 = AXIS2_PLACEMENT_3D('',#1169,#1170,#1171); +#1169 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,1.15)); +#1170 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#1171 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#1172 = ADVANCED_FACE('',(#1173),#1198,.T.); +#1173 = FACE_BOUND('',#1174,.T.); +#1174 = EDGE_LOOP('',(#1175,#1183,#1191,#1197)); +#1175 = ORIENTED_EDGE('',*,*,#1176,.T.); +#1176 = EDGE_CURVE('',#806,#1177,#1179,.T.); +#1177 = VERTEX_POINT('',#1178); +#1178 = CARTESIAN_POINT('',(4.75,-0.325,0.15)); +#1179 = LINE('',#1180,#1181); +#1180 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#1181 = VECTOR('',#1182,1.); +#1182 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#1183 = ORIENTED_EDGE('',*,*,#1184,.T.); +#1184 = EDGE_CURVE('',#1177,#1185,#1187,.T.); +#1185 = VERTEX_POINT('',#1186); +#1186 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#1187 = LINE('',#1188,#1189); +#1188 = CARTESIAN_POINT('',(4.75,-0.325,0.15)); +#1189 = VECTOR('',#1190,1.); +#1190 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#1191 = ORIENTED_EDGE('',*,*,#1192,.T.); +#1192 = EDGE_CURVE('',#1185,#847,#1193,.T.); +#1193 = LINE('',#1194,#1195); +#1194 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#1195 = VECTOR('',#1196,1.); +#1196 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#1197 = ORIENTED_EDGE('',*,*,#854,.F.); +#1198 = PLANE('',#1199); +#1199 = AXIS2_PLACEMENT_3D('',#1200,#1201,#1202); +#1200 = CARTESIAN_POINT('',(3.000096934556,-7.482284140497E-16,0.15)); +#1201 = DIRECTION('',(0.,0.,1.)); +#1202 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#1203 = ADVANCED_FACE('',(#1204),#1250,.T.); +#1204 = FACE_BOUND('',#1205,.T.); +#1205 = EDGE_LOOP('',(#1206,#1207,#1215,#1224,#1233,#1242,#1249)); +#1206 = ORIENTED_EDGE('',*,*,#876,.F.); +#1207 = ORIENTED_EDGE('',*,*,#1208,.T.); +#1208 = EDGE_CURVE('',#869,#1209,#1211,.T.); +#1209 = VERTEX_POINT('',#1210); +#1210 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,9.466666666667)); +#1211 = LINE('',#1212,#1213); +#1212 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.45)); +#1213 = VECTOR('',#1214,1.); +#1214 = DIRECTION('',(0.,0.,1.)); +#1215 = ORIENTED_EDGE('',*,*,#1216,.T.); +#1216 = EDGE_CURVE('',#1209,#1217,#1219,.T.); +#1217 = VERTEX_POINT('',#1218); +#1218 = CARTESIAN_POINT('',(1.2,3.815756805668,9.466666666667)); +#1219 = CIRCLE('',#1220,4.); +#1220 = AXIS2_PLACEMENT_3D('',#1221,#1222,#1223); +#1221 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1222 = DIRECTION('',(0.,0.,-1.)); +#1223 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1224 = ORIENTED_EDGE('',*,*,#1225,.T.); +#1225 = EDGE_CURVE('',#1217,#1226,#1228,.T.); +#1226 = VERTEX_POINT('',#1227); +#1227 = CARTESIAN_POINT('',(4.,-2.288475490444E-17,9.466666666667)); +#1228 = CIRCLE('',#1229,4.); +#1229 = AXIS2_PLACEMENT_3D('',#1230,#1231,#1232); +#1230 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1231 = DIRECTION('',(0.,0.,-1.)); +#1232 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1233 = ORIENTED_EDGE('',*,*,#1234,.T.); +#1234 = EDGE_CURVE('',#1226,#1235,#1237,.T.); +#1235 = VERTEX_POINT('',#1236); +#1236 = CARTESIAN_POINT('',(1.2,-3.815756805668,9.466666666667)); +#1237 = CIRCLE('',#1238,4.); +#1238 = AXIS2_PLACEMENT_3D('',#1239,#1240,#1241); +#1239 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1240 = DIRECTION('',(0.,0.,-1.)); +#1241 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1242 = ORIENTED_EDGE('',*,*,#1243,.T.); +#1243 = EDGE_CURVE('',#1235,#1209,#1244,.T.); +#1244 = CIRCLE('',#1245,4.); +#1245 = AXIS2_PLACEMENT_3D('',#1246,#1247,#1248); +#1246 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1247 = DIRECTION('',(0.,0.,-1.)); +#1248 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1249 = ORIENTED_EDGE('',*,*,#1208,.F.); +#1250 = CYLINDRICAL_SURFACE('',#1251,4.); +#1251 = AXIS2_PLACEMENT_3D('',#1252,#1253,#1254); +#1252 = CARTESIAN_POINT('',(0.,0.,2.45)); +#1253 = DIRECTION('',(0.,0.,1.)); +#1254 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1255 = ADVANCED_FACE('',(#1256),#1282,.F.); +#1256 = FACE_BOUND('',#1257,.F.); +#1257 = EDGE_LOOP('',(#1258,#1266,#1267,#1268,#1276)); +#1258 = ORIENTED_EDGE('',*,*,#1259,.T.); +#1259 = EDGE_CURVE('',#1260,#1053,#1262,.T.); +#1260 = VERTEX_POINT('',#1261); +#1261 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#1262 = LINE('',#1263,#1264); +#1263 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#1264 = VECTOR('',#1265,1.); +#1265 = DIRECTION('',(0.,0.,1.)); +#1266 = ORIENTED_EDGE('',*,*,#1060,.T.); +#1267 = ORIENTED_EDGE('',*,*,#1005,.T.); +#1268 = ORIENTED_EDGE('',*,*,#1269,.F.); +#1269 = EDGE_CURVE('',#1270,#997,#1272,.T.); +#1270 = VERTEX_POINT('',#1271); +#1271 = CARTESIAN_POINT('',(-1.425,-0.325,0.)); +#1272 = LINE('',#1273,#1274); +#1273 = CARTESIAN_POINT('',(-1.425,-0.325,0.)); +#1274 = VECTOR('',#1275,1.); +#1275 = DIRECTION('',(0.,0.,1.)); +#1276 = ORIENTED_EDGE('',*,*,#1277,.F.); +#1277 = EDGE_CURVE('',#1260,#1270,#1278,.T.); +#1278 = LINE('',#1279,#1280); +#1279 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#1280 = VECTOR('',#1281,1.); +#1281 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1282 = PLANE('',#1283); +#1283 = AXIS2_PLACEMENT_3D('',#1284,#1285,#1286); +#1284 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#1285 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#1286 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1287 = ADVANCED_FACE('',(#1288),#1307,.T.); +#1288 = FACE_BOUND('',#1289,.T.); +#1289 = EDGE_LOOP('',(#1290,#1299,#1305,#1306)); +#1290 = ORIENTED_EDGE('',*,*,#1291,.T.); +#1291 = EDGE_CURVE('',#1270,#1292,#1294,.T.); +#1292 = VERTEX_POINT('',#1293); +#1293 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#1294 = CIRCLE('',#1295,0.325); +#1295 = AXIS2_PLACEMENT_3D('',#1296,#1297,#1298); +#1296 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.)); +#1297 = DIRECTION('',(-0.,0.,1.)); +#1298 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#1299 = ORIENTED_EDGE('',*,*,#1300,.T.); +#1300 = EDGE_CURVE('',#1292,#989,#1301,.T.); +#1301 = LINE('',#1302,#1303); +#1302 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#1303 = VECTOR('',#1304,1.); +#1304 = DIRECTION('',(0.,0.,1.)); +#1305 = ORIENTED_EDGE('',*,*,#996,.F.); +#1306 = ORIENTED_EDGE('',*,*,#1269,.F.); +#1307 = CYLINDRICAL_SURFACE('',#1308,0.325); +#1308 = AXIS2_PLACEMENT_3D('',#1309,#1310,#1311); +#1309 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.)); +#1310 = DIRECTION('',(0.,0.,-1.)); +#1311 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#1312 = ADVANCED_FACE('',(#1313),#1332,.F.); +#1313 = FACE_BOUND('',#1314,.F.); +#1314 = EDGE_LOOP('',(#1315,#1316,#1317,#1318,#1326)); +#1315 = ORIENTED_EDGE('',*,*,#1300,.T.); +#1316 = ORIENTED_EDGE('',*,*,#988,.T.); +#1317 = ORIENTED_EDGE('',*,*,#1044,.T.); +#1318 = ORIENTED_EDGE('',*,*,#1319,.F.); +#1319 = EDGE_CURVE('',#1320,#1045,#1322,.T.); +#1320 = VERTEX_POINT('',#1321); +#1321 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#1322 = LINE('',#1323,#1324); +#1323 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#1324 = VECTOR('',#1325,1.); +#1325 = DIRECTION('',(0.,0.,1.)); +#1326 = ORIENTED_EDGE('',*,*,#1327,.F.); +#1327 = EDGE_CURVE('',#1292,#1320,#1328,.T.); +#1328 = LINE('',#1329,#1330); +#1329 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#1330 = VECTOR('',#1331,1.); +#1331 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#1332 = PLANE('',#1333); +#1333 = AXIS2_PLACEMENT_3D('',#1334,#1335,#1336); +#1334 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#1335 = DIRECTION('',(-8.90745137606E-17,-1.,0.)); +#1336 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#1337 = ADVANCED_FACE('',(#1338),#1364,.F.); +#1338 = FACE_BOUND('',#1339,.F.); +#1339 = EDGE_LOOP('',(#1340,#1348,#1349,#1350,#1358)); +#1340 = ORIENTED_EDGE('',*,*,#1341,.T.); +#1341 = EDGE_CURVE('',#1342,#1185,#1344,.T.); +#1342 = VERTEX_POINT('',#1343); +#1343 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#1344 = LINE('',#1345,#1346); +#1345 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#1346 = VECTOR('',#1347,1.); +#1347 = DIRECTION('',(0.,0.,1.)); +#1348 = ORIENTED_EDGE('',*,*,#1192,.T.); +#1349 = ORIENTED_EDGE('',*,*,#966,.T.); +#1350 = ORIENTED_EDGE('',*,*,#1351,.F.); +#1351 = EDGE_CURVE('',#1352,#958,#1354,.T.); +#1352 = VERTEX_POINT('',#1353); +#1353 = CARTESIAN_POINT('',(1.425,0.325,0.)); +#1354 = LINE('',#1355,#1356); +#1355 = CARTESIAN_POINT('',(1.425,0.325,0.)); +#1356 = VECTOR('',#1357,1.); +#1357 = DIRECTION('',(0.,0.,1.)); +#1358 = ORIENTED_EDGE('',*,*,#1359,.F.); +#1359 = EDGE_CURVE('',#1342,#1352,#1360,.T.); +#1360 = LINE('',#1361,#1362); +#1361 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#1362 = VECTOR('',#1363,1.); +#1363 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#1364 = PLANE('',#1365); +#1365 = AXIS2_PLACEMENT_3D('',#1366,#1367,#1368); +#1366 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#1367 = DIRECTION('',(-2.449293598295E-16,-1.,0.)); +#1368 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#1369 = ADVANCED_FACE('',(#1370),#1389,.T.); +#1370 = FACE_BOUND('',#1371,.T.); +#1371 = EDGE_LOOP('',(#1372,#1381,#1387,#1388)); +#1372 = ORIENTED_EDGE('',*,*,#1373,.T.); +#1373 = EDGE_CURVE('',#1352,#1374,#1376,.T.); +#1374 = VERTEX_POINT('',#1375); +#1375 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#1376 = CIRCLE('',#1377,0.325); +#1377 = AXIS2_PLACEMENT_3D('',#1378,#1379,#1380); +#1378 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.)); +#1379 = DIRECTION('',(0.,0.,1.)); +#1380 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#1381 = ORIENTED_EDGE('',*,*,#1382,.T.); +#1382 = EDGE_CURVE('',#1374,#950,#1383,.T.); +#1383 = LINE('',#1384,#1385); +#1384 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#1385 = VECTOR('',#1386,1.); +#1386 = DIRECTION('',(0.,0.,1.)); +#1387 = ORIENTED_EDGE('',*,*,#957,.F.); +#1388 = ORIENTED_EDGE('',*,*,#1351,.F.); +#1389 = CYLINDRICAL_SURFACE('',#1390,0.325); +#1390 = AXIS2_PLACEMENT_3D('',#1391,#1392,#1393); +#1391 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.)); +#1392 = DIRECTION('',(-0.,0.,-1.)); +#1393 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#1394 = ADVANCED_FACE('',(#1395),#1414,.F.); +#1395 = FACE_BOUND('',#1396,.F.); +#1396 = EDGE_LOOP('',(#1397,#1398,#1399,#1400,#1408)); +#1397 = ORIENTED_EDGE('',*,*,#1382,.T.); +#1398 = ORIENTED_EDGE('',*,*,#949,.T.); +#1399 = ORIENTED_EDGE('',*,*,#1176,.T.); +#1400 = ORIENTED_EDGE('',*,*,#1401,.F.); +#1401 = EDGE_CURVE('',#1402,#1177,#1404,.T.); +#1402 = VERTEX_POINT('',#1403); +#1403 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#1404 = LINE('',#1405,#1406); +#1405 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#1406 = VECTOR('',#1407,1.); +#1407 = DIRECTION('',(0.,0.,1.)); +#1408 = ORIENTED_EDGE('',*,*,#1409,.F.); +#1409 = EDGE_CURVE('',#1374,#1402,#1410,.T.); +#1410 = LINE('',#1411,#1412); +#1411 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#1412 = VECTOR('',#1413,1.); +#1413 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#1414 = PLANE('',#1415); +#1415 = AXIS2_PLACEMENT_3D('',#1416,#1417,#1418); +#1416 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#1417 = DIRECTION('',(2.115391936753E-16,1.,0.)); +#1418 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#1419 = ADVANCED_FACE('',(#1420),#1431,.F.); +#1420 = FACE_BOUND('',#1421,.F.); +#1421 = EDGE_LOOP('',(#1422,#1423,#1424,#1425)); +#1422 = ORIENTED_EDGE('',*,*,#1319,.T.); +#1423 = ORIENTED_EDGE('',*,*,#1052,.T.); +#1424 = ORIENTED_EDGE('',*,*,#1259,.F.); +#1425 = ORIENTED_EDGE('',*,*,#1426,.F.); +#1426 = EDGE_CURVE('',#1320,#1260,#1427,.T.); +#1427 = LINE('',#1428,#1429); +#1428 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#1429 = VECTOR('',#1430,1.); +#1430 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1431 = PLANE('',#1432); +#1432 = AXIS2_PLACEMENT_3D('',#1433,#1434,#1435); +#1433 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#1434 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#1435 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1436 = ADVANCED_FACE('',(#1437),#1448,.F.); +#1437 = FACE_BOUND('',#1438,.F.); +#1438 = EDGE_LOOP('',(#1439,#1440,#1441,#1442)); +#1439 = ORIENTED_EDGE('',*,*,#1401,.T.); +#1440 = ORIENTED_EDGE('',*,*,#1184,.T.); +#1441 = ORIENTED_EDGE('',*,*,#1341,.F.); +#1442 = ORIENTED_EDGE('',*,*,#1443,.F.); +#1443 = EDGE_CURVE('',#1402,#1342,#1444,.T.); +#1444 = LINE('',#1445,#1446); +#1445 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#1446 = VECTOR('',#1447,1.); +#1447 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#1448 = PLANE('',#1449); +#1449 = AXIS2_PLACEMENT_3D('',#1450,#1451,#1452); +#1450 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#1451 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#1452 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#1453 = ADVANCED_FACE('',(#1454),#1495,.T.); +#1454 = FACE_BOUND('',#1455,.T.); +#1455 = EDGE_LOOP('',(#1456,#1467,#1487,#1488)); +#1456 = ORIENTED_EDGE('',*,*,#1457,.T.); +#1457 = EDGE_CURVE('',#1458,#1460,#1462,.T.); +#1458 = VERTEX_POINT('',#1459); +#1459 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16,10.)); +#1460 = VERTEX_POINT('',#1461); +#1461 = CARTESIAN_POINT('',(1.2,3.25234957804,10.)); +#1462 = CIRCLE('',#1463,3.466666666667); +#1463 = AXIS2_PLACEMENT_3D('',#1464,#1465,#1466); +#1464 = CARTESIAN_POINT('',(0.,0.,10.)); +#1465 = DIRECTION('',(0.,0.,-1.)); +#1466 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1467 = ORIENTED_EDGE('',*,*,#1468,.F.); +#1468 = EDGE_CURVE('',#1217,#1460,#1469,.T.); +#1469 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#1470,#1471,#1472,#1473,#1474, + #1475,#1476,#1477,#1478,#1479,#1480,#1481,#1482,#1483,#1484,#1485, + #1486),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0.,0.297890205936, + 0.596186610785,1.),.UNSPECIFIED.); +#1470 = CARTESIAN_POINT('',(1.2,3.815756805668,9.466666666667)); +#1471 = CARTESIAN_POINT('',(1.2,3.815756801262,9.508696495753)); +#1472 = CARTESIAN_POINT('',(1.2,3.811590213401,9.55072831062)); +#1473 = CARTESIAN_POINT('',(1.2,3.803256501026,9.592270940133)); +#1474 = CARTESIAN_POINT('',(1.2,3.790843032593,9.632840928873)); +#1475 = CARTESIAN_POINT('',(1.2,3.774517833109,9.67197923621)); +#1476 = CARTESIAN_POINT('',(1.2,3.734499563645,9.746607480905)); +#1477 = CARTESIAN_POINT('',(1.2,3.710794784471,9.782095435341)); +#1478 = CARTESIAN_POINT('',(1.2,3.68364943293,9.815312213315)); +#1479 = CARTESIAN_POINT('',(1.2,3.653371267561,9.845890583241)); +#1480 = CARTESIAN_POINT('',(1.2,3.620319306473,9.873521824448)); +#1481 = CARTESIAN_POINT('',(1.2,3.536925313459,9.931047175461)); +#1482 = CARTESIAN_POINT('',(1.2,3.484598693754,9.958287259873)); +#1483 = CARTESIAN_POINT('',(1.2,3.428888029485,9.979074916341)); +#1484 = CARTESIAN_POINT('',(1.2,3.37087149716,9.993034515606)); +#1485 = CARTESIAN_POINT('',(1.2,3.311655602221,9.999999994454)); +#1486 = CARTESIAN_POINT('',(1.2,3.25234957804,10.)); +#1487 = ORIENTED_EDGE('',*,*,#1216,.F.); +#1488 = ORIENTED_EDGE('',*,*,#1489,.T.); +#1489 = EDGE_CURVE('',#1209,#1458,#1490,.T.); +#1490 = CIRCLE('',#1491,0.533333333333); +#1491 = AXIS2_PLACEMENT_3D('',#1492,#1493,#1494); +#1492 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16, + 9.466666666667)); +#1493 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#1494 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1495 = TOROIDAL_SURFACE('',#1496,3.466666666667,0.533333333333); +#1496 = AXIS2_PLACEMENT_3D('',#1497,#1498,#1499); +#1497 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1498 = DIRECTION('',(0.,0.,1.)); +#1499 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1500 = ADVANCED_FACE('',(#1501),#1535,.T.); +#1501 = FACE_BOUND('',#1502,.T.); +#1502 = EDGE_LOOP('',(#1503,#1512,#1532,#1533,#1534)); +#1503 = ORIENTED_EDGE('',*,*,#1504,.T.); +#1504 = EDGE_CURVE('',#1460,#1505,#1507,.T.); +#1505 = VERTEX_POINT('',#1506); +#1506 = CARTESIAN_POINT('',(1.2,-3.25234957804,10.)); +#1507 = CIRCLE('',#1508,3.466666666667); +#1508 = AXIS2_PLACEMENT_3D('',#1509,#1510,#1511); +#1509 = CARTESIAN_POINT('',(0.,0.,10.)); +#1510 = DIRECTION('',(0.,0.,-1.)); +#1511 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1512 = ORIENTED_EDGE('',*,*,#1513,.F.); +#1513 = EDGE_CURVE('',#1235,#1505,#1514,.T.); +#1514 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#1515,#1516,#1517,#1518,#1519, + #1520,#1521,#1522,#1523,#1524,#1525,#1526,#1527,#1528,#1529,#1530, + #1531),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0.,0.297890205938, + 0.596186610786,1.),.UNSPECIFIED.); +#1515 = CARTESIAN_POINT('',(1.2,-3.815756805668,9.466666666667)); +#1516 = CARTESIAN_POINT('',(1.2,-3.815756801262,9.508696495753)); +#1517 = CARTESIAN_POINT('',(1.2,-3.811590213401,9.55072831062)); +#1518 = CARTESIAN_POINT('',(1.2,-3.803256501026,9.592270940134)); +#1519 = CARTESIAN_POINT('',(1.2,-3.790843032593,9.632840928873)); +#1520 = CARTESIAN_POINT('',(1.2,-3.774517833109,9.671979236211)); +#1521 = CARTESIAN_POINT('',(1.2,-3.734499563644,9.746607480907)); +#1522 = CARTESIAN_POINT('',(1.2,-3.71079478447,9.782095435342)); +#1523 = CARTESIAN_POINT('',(1.2,-3.683649432929,9.815312213316)); +#1524 = CARTESIAN_POINT('',(1.2,-3.65337126756,9.845890583242)); +#1525 = CARTESIAN_POINT('',(1.2,-3.620319306472,9.873521824448)); +#1526 = CARTESIAN_POINT('',(1.2,-3.536925313457,9.931047175461)); +#1527 = CARTESIAN_POINT('',(1.2,-3.484598693753,9.958287259873)); +#1528 = CARTESIAN_POINT('',(1.2,-3.428888029485,9.979074916341)); +#1529 = CARTESIAN_POINT('',(1.2,-3.370871497159,9.993034515606)); +#1530 = CARTESIAN_POINT('',(1.2,-3.311655602221,9.999999994454)); +#1531 = CARTESIAN_POINT('',(1.2,-3.25234957804,10.)); +#1532 = ORIENTED_EDGE('',*,*,#1234,.F.); +#1533 = ORIENTED_EDGE('',*,*,#1225,.F.); +#1534 = ORIENTED_EDGE('',*,*,#1468,.T.); +#1535 = TOROIDAL_SURFACE('',#1536,3.466666666667,0.533333333333); +#1536 = AXIS2_PLACEMENT_3D('',#1537,#1538,#1539); +#1537 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1538 = DIRECTION('',(0.,0.,1.)); +#1539 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1540 = ADVANCED_FACE('',(#1541),#1553,.T.); +#1541 = FACE_BOUND('',#1542,.T.); +#1542 = EDGE_LOOP('',(#1543,#1544,#1551,#1552)); +#1543 = ORIENTED_EDGE('',*,*,#1513,.T.); +#1544 = ORIENTED_EDGE('',*,*,#1545,.T.); +#1545 = EDGE_CURVE('',#1505,#1458,#1546,.T.); +#1546 = CIRCLE('',#1547,3.466666666667); +#1547 = AXIS2_PLACEMENT_3D('',#1548,#1549,#1550); +#1548 = CARTESIAN_POINT('',(0.,0.,10.)); +#1549 = DIRECTION('',(0.,0.,-1.)); +#1550 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1551 = ORIENTED_EDGE('',*,*,#1489,.F.); +#1552 = ORIENTED_EDGE('',*,*,#1243,.F.); +#1553 = TOROIDAL_SURFACE('',#1554,3.466666666667,0.533333333333); +#1554 = AXIS2_PLACEMENT_3D('',#1555,#1556,#1557); +#1555 = CARTESIAN_POINT('',(0.,0.,9.466666666667)); +#1556 = DIRECTION('',(0.,0.,1.)); +#1557 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1558 = ADVANCED_FACE('',(#1559),#1565,.F.); +#1559 = FACE_BOUND('',#1560,.F.); +#1560 = EDGE_LOOP('',(#1561,#1562,#1563,#1564)); +#1561 = ORIENTED_EDGE('',*,*,#1426,.T.); +#1562 = ORIENTED_EDGE('',*,*,#1277,.T.); +#1563 = ORIENTED_EDGE('',*,*,#1291,.T.); +#1564 = ORIENTED_EDGE('',*,*,#1327,.T.); +#1565 = PLANE('',#1566); +#1566 = AXIS2_PLACEMENT_3D('',#1567,#1568,#1569); +#1567 = CARTESIAN_POINT('',(-3.000096934556,3.808225032462E-16,0.)); +#1568 = DIRECTION('',(0.,0.,1.)); +#1569 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1570 = ADVANCED_FACE('',(#1571),#1577,.F.); +#1571 = FACE_BOUND('',#1572,.F.); +#1572 = EDGE_LOOP('',(#1573,#1574,#1575,#1576)); +#1573 = ORIENTED_EDGE('',*,*,#1443,.T.); +#1574 = ORIENTED_EDGE('',*,*,#1359,.T.); +#1575 = ORIENTED_EDGE('',*,*,#1373,.T.); +#1576 = ORIENTED_EDGE('',*,*,#1409,.T.); +#1577 = PLANE('',#1578); +#1578 = AXIS2_PLACEMENT_3D('',#1579,#1580,#1581); +#1579 = CARTESIAN_POINT('',(3.000096934556,-7.482284140497E-16,0.)); +#1580 = DIRECTION('',(0.,0.,1.)); +#1581 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#1582 = ADVANCED_FACE('',(#1583),#1593,.F.); +#1583 = FACE_BOUND('',#1584,.F.); +#1584 = EDGE_LOOP('',(#1585,#1586,#1587)); +#1585 = ORIENTED_EDGE('',*,*,#1545,.T.); +#1586 = ORIENTED_EDGE('',*,*,#1457,.T.); +#1587 = ORIENTED_EDGE('',*,*,#1588,.T.); +#1588 = EDGE_CURVE('',#1460,#1505,#1589,.T.); +#1589 = LINE('',#1590,#1591); +#1590 = CARTESIAN_POINT('',(1.2,4.,10.)); +#1591 = VECTOR('',#1592,1.); +#1592 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#1593 = PLANE('',#1594); +#1594 = AXIS2_PLACEMENT_3D('',#1595,#1596,#1597); +#1595 = CARTESIAN_POINT('',(0.,0.,10.)); +#1596 = DIRECTION('',(-0.,0.,-1.)); +#1597 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1598 = ADVANCED_FACE('',(#1599),#1603,.T.); +#1599 = FACE_BOUND('',#1600,.T.); +#1600 = EDGE_LOOP('',(#1601,#1602)); +#1601 = ORIENTED_EDGE('',*,*,#1504,.F.); +#1602 = ORIENTED_EDGE('',*,*,#1588,.T.); +#1603 = PLANE('',#1604); +#1604 = AXIS2_PLACEMENT_3D('',#1605,#1606,#1607); +#1605 = CARTESIAN_POINT('',(4.,4.,10.)); +#1606 = DIRECTION('',(0.,0.,1.)); +#1607 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#1608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1612)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1609,#1610,#1611)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1609 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1610 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1611 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1612 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#1609, + 'distance_accuracy_value','confusion accuracy'); +#1613 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1614,#1616); +#1614 = ( REPRESENTATION_RELATIONSHIP('','',#244,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1615) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#1615 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15); +#1616 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #1617); +#1617 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','C1','',#5,#239,$); +#1618 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#241)); +#1619 = SHAPE_DEFINITION_REPRESENTATION(#1620,#1626); +#1620 = PRODUCT_DEFINITION_SHAPE('','',#1621); +#1621 = PRODUCT_DEFINITION('design','',#1622,#1625); +#1622 = PRODUCT_DEFINITION_FORMATION('','',#1623); +#1623 = PRODUCT('C_0603_1608Metric','C_0603_1608Metric','',(#1624)); +#1624 = PRODUCT_CONTEXT('',#2,'mechanical'); +#1625 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#1626 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#1627),#2481); +#1627 = MANIFOLD_SOLID_BREP('',#1628); +#1628 = CLOSED_SHELL('',(#1629,#1705,#1736,#1761,#1786,#1810,#1834,#1859 + ,#1884,#1901,#1987,#2019,#2043,#2068,#2092,#2117,#2141,#2166,#2183, + #2269,#2300,#2325,#2350,#2374,#2398,#2423,#2448,#2465)); +#1629 = ADVANCED_FACE('',(#1630),#1700,.F.); +#1630 = FACE_BOUND('',#1631,.F.); +#1631 = EDGE_LOOP('',(#1632,#1642,#1651,#1659,#1668,#1676,#1685,#1693)); +#1632 = ORIENTED_EDGE('',*,*,#1633,.F.); +#1633 = EDGE_CURVE('',#1634,#1636,#1638,.T.); +#1634 = VERTEX_POINT('',#1635); +#1635 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#1636 = VERTEX_POINT('',#1637); +#1637 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#1638 = LINE('',#1639,#1640); +#1639 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1640 = VECTOR('',#1641,1.); +#1641 = DIRECTION('',(0.,0.,1.)); +#1642 = ORIENTED_EDGE('',*,*,#1643,.T.); +#1643 = EDGE_CURVE('',#1634,#1644,#1646,.T.); +#1644 = VERTEX_POINT('',#1645); +#1645 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#1646 = CIRCLE('',#1647,3.E-02); +#1647 = AXIS2_PLACEMENT_3D('',#1648,#1649,#1650); +#1648 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#1649 = DIRECTION('',(1.,0.,-0.)); +#1650 = DIRECTION('',(0.,0.,1.)); +#1651 = ORIENTED_EDGE('',*,*,#1652,.T.); +#1652 = EDGE_CURVE('',#1644,#1653,#1655,.T.); +#1653 = VERTEX_POINT('',#1654); +#1654 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#1655 = LINE('',#1656,#1657); +#1656 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1657 = VECTOR('',#1658,1.); +#1658 = DIRECTION('',(0.,1.,0.)); +#1659 = ORIENTED_EDGE('',*,*,#1660,.F.); +#1660 = EDGE_CURVE('',#1661,#1653,#1663,.T.); +#1661 = VERTEX_POINT('',#1662); +#1662 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#1663 = CIRCLE('',#1664,3.E-02); +#1664 = AXIS2_PLACEMENT_3D('',#1665,#1666,#1667); +#1665 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#1666 = DIRECTION('',(-1.,0.,0.)); +#1667 = DIRECTION('',(0.,0.,1.)); +#1668 = ORIENTED_EDGE('',*,*,#1669,.T.); +#1669 = EDGE_CURVE('',#1661,#1670,#1672,.T.); +#1670 = VERTEX_POINT('',#1671); +#1671 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#1672 = LINE('',#1673,#1674); +#1673 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#1674 = VECTOR('',#1675,1.); +#1675 = DIRECTION('',(0.,0.,1.)); +#1676 = ORIENTED_EDGE('',*,*,#1677,.T.); +#1677 = EDGE_CURVE('',#1670,#1678,#1680,.T.); +#1678 = VERTEX_POINT('',#1679); +#1679 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#1680 = CIRCLE('',#1681,3.E-02); +#1681 = AXIS2_PLACEMENT_3D('',#1682,#1683,#1684); +#1682 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#1683 = DIRECTION('',(1.,0.,-0.)); +#1684 = DIRECTION('',(0.,0.,1.)); +#1685 = ORIENTED_EDGE('',*,*,#1686,.F.); +#1686 = EDGE_CURVE('',#1687,#1678,#1689,.T.); +#1687 = VERTEX_POINT('',#1688); +#1688 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#1689 = LINE('',#1690,#1691); +#1690 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#1691 = VECTOR('',#1692,1.); +#1692 = DIRECTION('',(0.,1.,0.)); +#1693 = ORIENTED_EDGE('',*,*,#1694,.F.); +#1694 = EDGE_CURVE('',#1636,#1687,#1695,.T.); +#1695 = CIRCLE('',#1696,3.E-02); +#1696 = AXIS2_PLACEMENT_3D('',#1697,#1698,#1699); +#1697 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#1698 = DIRECTION('',(-1.,0.,0.)); +#1699 = DIRECTION('',(0.,0.,1.)); +#1700 = PLANE('',#1701); +#1701 = AXIS2_PLACEMENT_3D('',#1702,#1703,#1704); +#1702 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1703 = DIRECTION('',(1.,0.,0.)); +#1704 = DIRECTION('',(0.,0.,1.)); +#1705 = ADVANCED_FACE('',(#1706),#1731,.F.); +#1706 = FACE_BOUND('',#1707,.F.); +#1707 = EDGE_LOOP('',(#1708,#1718,#1724,#1725)); +#1708 = ORIENTED_EDGE('',*,*,#1709,.F.); +#1709 = EDGE_CURVE('',#1710,#1712,#1714,.T.); +#1710 = VERTEX_POINT('',#1711); +#1711 = CARTESIAN_POINT('',(-0.5,-0.4,3.E-02)); +#1712 = VERTEX_POINT('',#1713); +#1713 = CARTESIAN_POINT('',(-0.5,-0.4,0.77)); +#1714 = LINE('',#1715,#1716); +#1715 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#1716 = VECTOR('',#1717,1.); +#1717 = DIRECTION('',(0.,0.,1.)); +#1718 = ORIENTED_EDGE('',*,*,#1719,.F.); +#1719 = EDGE_CURVE('',#1634,#1710,#1720,.T.); +#1720 = LINE('',#1721,#1722); +#1721 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#1722 = VECTOR('',#1723,1.); +#1723 = DIRECTION('',(1.,0.,0.)); +#1724 = ORIENTED_EDGE('',*,*,#1633,.T.); +#1725 = ORIENTED_EDGE('',*,*,#1726,.T.); +#1726 = EDGE_CURVE('',#1636,#1712,#1727,.T.); +#1727 = LINE('',#1728,#1729); +#1728 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#1729 = VECTOR('',#1730,1.); +#1730 = DIRECTION('',(1.,0.,0.)); +#1731 = PLANE('',#1732); +#1732 = AXIS2_PLACEMENT_3D('',#1733,#1734,#1735); +#1733 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1734 = DIRECTION('',(0.,1.,0.)); +#1735 = DIRECTION('',(0.,-0.,1.)); +#1736 = ADVANCED_FACE('',(#1737),#1756,.T.); +#1737 = FACE_BOUND('',#1738,.T.); +#1738 = EDGE_LOOP('',(#1739,#1740,#1748,#1755)); +#1739 = ORIENTED_EDGE('',*,*,#1643,.T.); +#1740 = ORIENTED_EDGE('',*,*,#1741,.T.); +#1741 = EDGE_CURVE('',#1644,#1742,#1744,.T.); +#1742 = VERTEX_POINT('',#1743); +#1743 = CARTESIAN_POINT('',(-0.5,-0.37,0.)); +#1744 = LINE('',#1745,#1746); +#1745 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#1746 = VECTOR('',#1747,1.); +#1747 = DIRECTION('',(1.,0.,0.)); +#1748 = ORIENTED_EDGE('',*,*,#1749,.F.); +#1749 = EDGE_CURVE('',#1710,#1742,#1750,.T.); +#1750 = CIRCLE('',#1751,3.E-02); +#1751 = AXIS2_PLACEMENT_3D('',#1752,#1753,#1754); +#1752 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#1753 = DIRECTION('',(1.,0.,-0.)); +#1754 = DIRECTION('',(0.,0.,1.)); +#1755 = ORIENTED_EDGE('',*,*,#1719,.F.); +#1756 = CYLINDRICAL_SURFACE('',#1757,3.E-02); +#1757 = AXIS2_PLACEMENT_3D('',#1758,#1759,#1760); +#1758 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#1759 = DIRECTION('',(1.,0.,0.)); +#1760 = DIRECTION('',(0.,-1.,0.)); +#1761 = ADVANCED_FACE('',(#1762),#1781,.T.); +#1762 = FACE_BOUND('',#1763,.T.); +#1763 = EDGE_LOOP('',(#1764,#1765,#1774,#1780)); +#1764 = ORIENTED_EDGE('',*,*,#1726,.T.); +#1765 = ORIENTED_EDGE('',*,*,#1766,.T.); +#1766 = EDGE_CURVE('',#1712,#1767,#1769,.T.); +#1767 = VERTEX_POINT('',#1768); +#1768 = CARTESIAN_POINT('',(-0.5,-0.37,0.8)); +#1769 = CIRCLE('',#1770,3.E-02); +#1770 = AXIS2_PLACEMENT_3D('',#1771,#1772,#1773); +#1771 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#1772 = DIRECTION('',(-1.,0.,0.)); +#1773 = DIRECTION('',(0.,0.,1.)); +#1774 = ORIENTED_EDGE('',*,*,#1775,.F.); +#1775 = EDGE_CURVE('',#1687,#1767,#1776,.T.); +#1776 = LINE('',#1777,#1778); +#1777 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#1778 = VECTOR('',#1779,1.); +#1779 = DIRECTION('',(1.,0.,0.)); +#1780 = ORIENTED_EDGE('',*,*,#1694,.F.); +#1781 = CYLINDRICAL_SURFACE('',#1782,3.E-02); +#1782 = AXIS2_PLACEMENT_3D('',#1783,#1784,#1785); +#1783 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#1784 = DIRECTION('',(1.,0.,0.)); +#1785 = DIRECTION('',(0.,-1.,0.)); +#1786 = ADVANCED_FACE('',(#1787),#1805,.F.); +#1787 = FACE_BOUND('',#1788,.F.); +#1788 = EDGE_LOOP('',(#1789,#1790,#1791,#1799)); +#1789 = ORIENTED_EDGE('',*,*,#1652,.F.); +#1790 = ORIENTED_EDGE('',*,*,#1741,.T.); +#1791 = ORIENTED_EDGE('',*,*,#1792,.T.); +#1792 = EDGE_CURVE('',#1742,#1793,#1795,.T.); +#1793 = VERTEX_POINT('',#1794); +#1794 = CARTESIAN_POINT('',(-0.5,0.37,0.)); +#1795 = LINE('',#1796,#1797); +#1796 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#1797 = VECTOR('',#1798,1.); +#1798 = DIRECTION('',(0.,1.,0.)); +#1799 = ORIENTED_EDGE('',*,*,#1800,.F.); +#1800 = EDGE_CURVE('',#1653,#1793,#1801,.T.); +#1801 = LINE('',#1802,#1803); +#1802 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#1803 = VECTOR('',#1804,1.); +#1804 = DIRECTION('',(1.,0.,0.)); +#1805 = PLANE('',#1806); +#1806 = AXIS2_PLACEMENT_3D('',#1807,#1808,#1809); +#1807 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#1808 = DIRECTION('',(0.,0.,1.)); +#1809 = DIRECTION('',(1.,0.,-0.)); +#1810 = ADVANCED_FACE('',(#1811),#1829,.T.); +#1811 = FACE_BOUND('',#1812,.T.); +#1812 = EDGE_LOOP('',(#1813,#1814,#1815,#1823)); +#1813 = ORIENTED_EDGE('',*,*,#1686,.F.); +#1814 = ORIENTED_EDGE('',*,*,#1775,.T.); +#1815 = ORIENTED_EDGE('',*,*,#1816,.T.); +#1816 = EDGE_CURVE('',#1767,#1817,#1819,.T.); +#1817 = VERTEX_POINT('',#1818); +#1818 = CARTESIAN_POINT('',(-0.5,0.37,0.8)); +#1819 = LINE('',#1820,#1821); +#1820 = CARTESIAN_POINT('',(-0.5,-0.4,0.8)); +#1821 = VECTOR('',#1822,1.); +#1822 = DIRECTION('',(0.,1.,0.)); +#1823 = ORIENTED_EDGE('',*,*,#1824,.F.); +#1824 = EDGE_CURVE('',#1678,#1817,#1825,.T.); +#1825 = LINE('',#1826,#1827); +#1826 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#1827 = VECTOR('',#1828,1.); +#1828 = DIRECTION('',(1.,0.,0.)); +#1829 = PLANE('',#1830); +#1830 = AXIS2_PLACEMENT_3D('',#1831,#1832,#1833); +#1831 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#1832 = DIRECTION('',(0.,0.,1.)); +#1833 = DIRECTION('',(1.,0.,-0.)); +#1834 = ADVANCED_FACE('',(#1835),#1854,.T.); +#1835 = FACE_BOUND('',#1836,.T.); +#1836 = EDGE_LOOP('',(#1837,#1845,#1852,#1853)); +#1837 = ORIENTED_EDGE('',*,*,#1838,.T.); +#1838 = EDGE_CURVE('',#1661,#1839,#1841,.T.); +#1839 = VERTEX_POINT('',#1840); +#1840 = CARTESIAN_POINT('',(-0.5,0.4,3.E-02)); +#1841 = LINE('',#1842,#1843); +#1842 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#1843 = VECTOR('',#1844,1.); +#1844 = DIRECTION('',(1.,0.,0.)); +#1845 = ORIENTED_EDGE('',*,*,#1846,.T.); +#1846 = EDGE_CURVE('',#1839,#1793,#1847,.T.); +#1847 = CIRCLE('',#1848,3.E-02); +#1848 = AXIS2_PLACEMENT_3D('',#1849,#1850,#1851); +#1849 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#1850 = DIRECTION('',(-1.,0.,0.)); +#1851 = DIRECTION('',(0.,0.,1.)); +#1852 = ORIENTED_EDGE('',*,*,#1800,.F.); +#1853 = ORIENTED_EDGE('',*,*,#1660,.F.); +#1854 = CYLINDRICAL_SURFACE('',#1855,3.E-02); +#1855 = AXIS2_PLACEMENT_3D('',#1856,#1857,#1858); +#1856 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#1857 = DIRECTION('',(1.,0.,0.)); +#1858 = DIRECTION('',(-0.,1.,0.)); +#1859 = ADVANCED_FACE('',(#1860),#1879,.T.); +#1860 = FACE_BOUND('',#1861,.T.); +#1861 = EDGE_LOOP('',(#1862,#1863,#1864,#1873)); +#1862 = ORIENTED_EDGE('',*,*,#1677,.T.); +#1863 = ORIENTED_EDGE('',*,*,#1824,.T.); +#1864 = ORIENTED_EDGE('',*,*,#1865,.F.); +#1865 = EDGE_CURVE('',#1866,#1817,#1868,.T.); +#1866 = VERTEX_POINT('',#1867); +#1867 = CARTESIAN_POINT('',(-0.5,0.4,0.77)); +#1868 = CIRCLE('',#1869,3.E-02); +#1869 = AXIS2_PLACEMENT_3D('',#1870,#1871,#1872); +#1870 = CARTESIAN_POINT('',(-0.5,0.37,0.77)); +#1871 = DIRECTION('',(1.,0.,-0.)); +#1872 = DIRECTION('',(0.,0.,1.)); +#1873 = ORIENTED_EDGE('',*,*,#1874,.F.); +#1874 = EDGE_CURVE('',#1670,#1866,#1875,.T.); +#1875 = LINE('',#1876,#1877); +#1876 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#1877 = VECTOR('',#1878,1.); +#1878 = DIRECTION('',(1.,0.,0.)); +#1879 = CYLINDRICAL_SURFACE('',#1880,3.E-02); +#1880 = AXIS2_PLACEMENT_3D('',#1881,#1882,#1883); +#1881 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#1882 = DIRECTION('',(1.,0.,0.)); +#1883 = DIRECTION('',(-0.,1.,0.)); +#1884 = ADVANCED_FACE('',(#1885),#1896,.T.); +#1885 = FACE_BOUND('',#1886,.T.); +#1886 = EDGE_LOOP('',(#1887,#1893,#1894,#1895)); +#1887 = ORIENTED_EDGE('',*,*,#1888,.F.); +#1888 = EDGE_CURVE('',#1839,#1866,#1889,.T.); +#1889 = LINE('',#1890,#1891); +#1890 = CARTESIAN_POINT('',(-0.5,0.4,0.)); +#1891 = VECTOR('',#1892,1.); +#1892 = DIRECTION('',(0.,0.,1.)); +#1893 = ORIENTED_EDGE('',*,*,#1838,.F.); +#1894 = ORIENTED_EDGE('',*,*,#1669,.T.); +#1895 = ORIENTED_EDGE('',*,*,#1874,.T.); +#1896 = PLANE('',#1897); +#1897 = AXIS2_PLACEMENT_3D('',#1898,#1899,#1900); +#1898 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#1899 = DIRECTION('',(0.,1.,0.)); +#1900 = DIRECTION('',(0.,-0.,1.)); +#1901 = ADVANCED_FACE('',(#1902,#1912),#1982,.T.); +#1902 = FACE_BOUND('',#1903,.T.); +#1903 = EDGE_LOOP('',(#1904,#1905,#1906,#1907,#1908,#1909,#1910,#1911)); +#1904 = ORIENTED_EDGE('',*,*,#1709,.F.); +#1905 = ORIENTED_EDGE('',*,*,#1749,.T.); +#1906 = ORIENTED_EDGE('',*,*,#1792,.T.); +#1907 = ORIENTED_EDGE('',*,*,#1846,.F.); +#1908 = ORIENTED_EDGE('',*,*,#1888,.T.); +#1909 = ORIENTED_EDGE('',*,*,#1865,.T.); +#1910 = ORIENTED_EDGE('',*,*,#1816,.F.); +#1911 = ORIENTED_EDGE('',*,*,#1766,.F.); +#1912 = FACE_BOUND('',#1913,.T.); +#1913 = EDGE_LOOP('',(#1914,#1925,#1933,#1942,#1950,#1959,#1967,#1976)); +#1914 = ORIENTED_EDGE('',*,*,#1915,.F.); +#1915 = EDGE_CURVE('',#1916,#1918,#1920,.T.); +#1916 = VERTEX_POINT('',#1917); +#1917 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#1918 = VERTEX_POINT('',#1919); +#1919 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#1920 = CIRCLE('',#1921,3.E-02); +#1921 = AXIS2_PLACEMENT_3D('',#1922,#1923,#1924); +#1922 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#1923 = DIRECTION('',(1.,0.,-0.)); +#1924 = DIRECTION('',(0.,0.,1.)); +#1925 = ORIENTED_EDGE('',*,*,#1926,.T.); +#1926 = EDGE_CURVE('',#1916,#1927,#1929,.T.); +#1927 = VERTEX_POINT('',#1928); +#1928 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#1929 = LINE('',#1930,#1931); +#1930 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#1931 = VECTOR('',#1932,1.); +#1932 = DIRECTION('',(0.,0.,1.)); +#1933 = ORIENTED_EDGE('',*,*,#1934,.T.); +#1934 = EDGE_CURVE('',#1927,#1935,#1937,.T.); +#1935 = VERTEX_POINT('',#1936); +#1936 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#1937 = CIRCLE('',#1938,3.E-02); +#1938 = AXIS2_PLACEMENT_3D('',#1939,#1940,#1941); +#1939 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#1940 = DIRECTION('',(-1.,0.,0.)); +#1941 = DIRECTION('',(0.,0.,1.)); +#1942 = ORIENTED_EDGE('',*,*,#1943,.T.); +#1943 = EDGE_CURVE('',#1935,#1944,#1946,.T.); +#1944 = VERTEX_POINT('',#1945); +#1945 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#1946 = LINE('',#1947,#1948); +#1947 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#1948 = VECTOR('',#1949,1.); +#1949 = DIRECTION('',(0.,1.,0.)); +#1950 = ORIENTED_EDGE('',*,*,#1951,.F.); +#1951 = EDGE_CURVE('',#1952,#1944,#1954,.T.); +#1952 = VERTEX_POINT('',#1953); +#1953 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#1954 = CIRCLE('',#1955,3.E-02); +#1955 = AXIS2_PLACEMENT_3D('',#1956,#1957,#1958); +#1956 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#1957 = DIRECTION('',(1.,0.,-0.)); +#1958 = DIRECTION('',(0.,0.,1.)); +#1959 = ORIENTED_EDGE('',*,*,#1960,.F.); +#1960 = EDGE_CURVE('',#1961,#1952,#1963,.T.); +#1961 = VERTEX_POINT('',#1962); +#1962 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#1963 = LINE('',#1964,#1965); +#1964 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#1965 = VECTOR('',#1966,1.); +#1966 = DIRECTION('',(0.,0.,1.)); +#1967 = ORIENTED_EDGE('',*,*,#1968,.T.); +#1968 = EDGE_CURVE('',#1961,#1969,#1971,.T.); +#1969 = VERTEX_POINT('',#1970); +#1970 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#1971 = CIRCLE('',#1972,3.E-02); +#1972 = AXIS2_PLACEMENT_3D('',#1973,#1974,#1975); +#1973 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#1974 = DIRECTION('',(-1.,0.,0.)); +#1975 = DIRECTION('',(0.,0.,1.)); +#1976 = ORIENTED_EDGE('',*,*,#1977,.F.); +#1977 = EDGE_CURVE('',#1918,#1969,#1978,.T.); +#1978 = LINE('',#1979,#1980); +#1979 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#1980 = VECTOR('',#1981,1.); +#1981 = DIRECTION('',(0.,1.,0.)); +#1982 = PLANE('',#1983); +#1983 = AXIS2_PLACEMENT_3D('',#1984,#1985,#1986); +#1984 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#1985 = DIRECTION('',(1.,0.,0.)); +#1986 = DIRECTION('',(0.,0.,1.)); +#1987 = ADVANCED_FACE('',(#1988),#2014,.T.); +#1988 = FACE_BOUND('',#1989,.T.); +#1989 = EDGE_LOOP('',(#1990,#1991,#1999,#2008)); +#1990 = ORIENTED_EDGE('',*,*,#1915,.T.); +#1991 = ORIENTED_EDGE('',*,*,#1992,.T.); +#1992 = EDGE_CURVE('',#1918,#1993,#1995,.T.); +#1993 = VERTEX_POINT('',#1994); +#1994 = CARTESIAN_POINT('',(0.5,-0.34,3.E-02)); +#1995 = LINE('',#1996,#1997); +#1996 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#1997 = VECTOR('',#1998,1.); +#1998 = DIRECTION('',(1.,0.,0.)); +#1999 = ORIENTED_EDGE('',*,*,#2000,.F.); +#2000 = EDGE_CURVE('',#2001,#1993,#2003,.T.); +#2001 = VERTEX_POINT('',#2002); +#2002 = CARTESIAN_POINT('',(0.5,-0.37,6.E-02)); +#2003 = CIRCLE('',#2004,3.E-02); +#2004 = AXIS2_PLACEMENT_3D('',#2005,#2006,#2007); +#2005 = CARTESIAN_POINT('',(0.5,-0.34,6.E-02)); +#2006 = DIRECTION('',(1.,0.,-0.)); +#2007 = DIRECTION('',(0.,0.,1.)); +#2008 = ORIENTED_EDGE('',*,*,#2009,.F.); +#2009 = EDGE_CURVE('',#1916,#2001,#2010,.T.); +#2010 = LINE('',#2011,#2012); +#2011 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#2012 = VECTOR('',#2013,1.); +#2013 = DIRECTION('',(1.,0.,0.)); +#2014 = CYLINDRICAL_SURFACE('',#2015,3.E-02); +#2015 = AXIS2_PLACEMENT_3D('',#2016,#2017,#2018); +#2016 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#2017 = DIRECTION('',(1.,0.,0.)); +#2018 = DIRECTION('',(0.,-1.,0.)); +#2019 = ADVANCED_FACE('',(#2020),#2038,.F.); +#2020 = FACE_BOUND('',#2021,.F.); +#2021 = EDGE_LOOP('',(#2022,#2023,#2024,#2032)); +#2022 = ORIENTED_EDGE('',*,*,#1977,.F.); +#2023 = ORIENTED_EDGE('',*,*,#1992,.T.); +#2024 = ORIENTED_EDGE('',*,*,#2025,.T.); +#2025 = EDGE_CURVE('',#1993,#2026,#2028,.T.); +#2026 = VERTEX_POINT('',#2027); +#2027 = CARTESIAN_POINT('',(0.5,0.34,3.E-02)); +#2028 = LINE('',#2029,#2030); +#2029 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#2030 = VECTOR('',#2031,1.); +#2031 = DIRECTION('',(0.,1.,0.)); +#2032 = ORIENTED_EDGE('',*,*,#2033,.F.); +#2033 = EDGE_CURVE('',#1969,#2026,#2034,.T.); +#2034 = LINE('',#2035,#2036); +#2035 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#2036 = VECTOR('',#2037,1.); +#2037 = DIRECTION('',(1.,0.,0.)); +#2038 = PLANE('',#2039); +#2039 = AXIS2_PLACEMENT_3D('',#2040,#2041,#2042); +#2040 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#2041 = DIRECTION('',(0.,0.,1.)); +#2042 = DIRECTION('',(1.,0.,-0.)); +#2043 = ADVANCED_FACE('',(#2044),#2063,.T.); +#2044 = FACE_BOUND('',#2045,.T.); +#2045 = EDGE_LOOP('',(#2046,#2054,#2061,#2062)); +#2046 = ORIENTED_EDGE('',*,*,#2047,.T.); +#2047 = EDGE_CURVE('',#1961,#2048,#2050,.T.); +#2048 = VERTEX_POINT('',#2049); +#2049 = CARTESIAN_POINT('',(0.5,0.37,6.E-02)); +#2050 = LINE('',#2051,#2052); +#2051 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#2052 = VECTOR('',#2053,1.); +#2053 = DIRECTION('',(1.,0.,0.)); +#2054 = ORIENTED_EDGE('',*,*,#2055,.T.); +#2055 = EDGE_CURVE('',#2048,#2026,#2056,.T.); +#2056 = CIRCLE('',#2057,3.E-02); +#2057 = AXIS2_PLACEMENT_3D('',#2058,#2059,#2060); +#2058 = CARTESIAN_POINT('',(0.5,0.34,6.E-02)); +#2059 = DIRECTION('',(-1.,0.,0.)); +#2060 = DIRECTION('',(0.,0.,1.)); +#2061 = ORIENTED_EDGE('',*,*,#2033,.F.); +#2062 = ORIENTED_EDGE('',*,*,#1968,.F.); +#2063 = CYLINDRICAL_SURFACE('',#2064,3.E-02); +#2064 = AXIS2_PLACEMENT_3D('',#2065,#2066,#2067); +#2065 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#2066 = DIRECTION('',(1.,0.,0.)); +#2067 = DIRECTION('',(-0.,1.,0.)); +#2068 = ADVANCED_FACE('',(#2069),#2087,.T.); +#2069 = FACE_BOUND('',#2070,.T.); +#2070 = EDGE_LOOP('',(#2071,#2079,#2080,#2081)); +#2071 = ORIENTED_EDGE('',*,*,#2072,.F.); +#2072 = EDGE_CURVE('',#2048,#2073,#2075,.T.); +#2073 = VERTEX_POINT('',#2074); +#2074 = CARTESIAN_POINT('',(0.5,0.37,0.74)); +#2075 = LINE('',#2076,#2077); +#2076 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#2077 = VECTOR('',#2078,1.); +#2078 = DIRECTION('',(0.,0.,1.)); +#2079 = ORIENTED_EDGE('',*,*,#2047,.F.); +#2080 = ORIENTED_EDGE('',*,*,#1960,.T.); +#2081 = ORIENTED_EDGE('',*,*,#2082,.T.); +#2082 = EDGE_CURVE('',#1952,#2073,#2083,.T.); +#2083 = LINE('',#2084,#2085); +#2084 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#2085 = VECTOR('',#2086,1.); +#2086 = DIRECTION('',(1.,0.,0.)); +#2087 = PLANE('',#2088); +#2088 = AXIS2_PLACEMENT_3D('',#2089,#2090,#2091); +#2089 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#2090 = DIRECTION('',(0.,1.,0.)); +#2091 = DIRECTION('',(0.,-0.,1.)); +#2092 = ADVANCED_FACE('',(#2093),#2112,.T.); +#2093 = FACE_BOUND('',#2094,.T.); +#2094 = EDGE_LOOP('',(#2095,#2096,#2104,#2111)); +#2095 = ORIENTED_EDGE('',*,*,#1951,.T.); +#2096 = ORIENTED_EDGE('',*,*,#2097,.T.); +#2097 = EDGE_CURVE('',#1944,#2098,#2100,.T.); +#2098 = VERTEX_POINT('',#2099); +#2099 = CARTESIAN_POINT('',(0.5,0.34,0.77)); +#2100 = LINE('',#2101,#2102); +#2101 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#2102 = VECTOR('',#2103,1.); +#2103 = DIRECTION('',(1.,0.,0.)); +#2104 = ORIENTED_EDGE('',*,*,#2105,.F.); +#2105 = EDGE_CURVE('',#2073,#2098,#2106,.T.); +#2106 = CIRCLE('',#2107,3.E-02); +#2107 = AXIS2_PLACEMENT_3D('',#2108,#2109,#2110); +#2108 = CARTESIAN_POINT('',(0.5,0.34,0.74)); +#2109 = DIRECTION('',(1.,0.,-0.)); +#2110 = DIRECTION('',(0.,0.,1.)); +#2111 = ORIENTED_EDGE('',*,*,#2082,.F.); +#2112 = CYLINDRICAL_SURFACE('',#2113,3.E-02); +#2113 = AXIS2_PLACEMENT_3D('',#2114,#2115,#2116); +#2114 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#2115 = DIRECTION('',(1.,0.,0.)); +#2116 = DIRECTION('',(-0.,1.,0.)); +#2117 = ADVANCED_FACE('',(#2118),#2136,.T.); +#2118 = FACE_BOUND('',#2119,.T.); +#2119 = EDGE_LOOP('',(#2120,#2121,#2129,#2135)); +#2120 = ORIENTED_EDGE('',*,*,#1943,.F.); +#2121 = ORIENTED_EDGE('',*,*,#2122,.T.); +#2122 = EDGE_CURVE('',#1935,#2123,#2125,.T.); +#2123 = VERTEX_POINT('',#2124); +#2124 = CARTESIAN_POINT('',(0.5,-0.34,0.77)); +#2125 = LINE('',#2126,#2127); +#2126 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#2127 = VECTOR('',#2128,1.); +#2128 = DIRECTION('',(1.,0.,0.)); +#2129 = ORIENTED_EDGE('',*,*,#2130,.T.); +#2130 = EDGE_CURVE('',#2123,#2098,#2131,.T.); +#2131 = LINE('',#2132,#2133); +#2132 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#2133 = VECTOR('',#2134,1.); +#2134 = DIRECTION('',(0.,1.,0.)); +#2135 = ORIENTED_EDGE('',*,*,#2097,.F.); +#2136 = PLANE('',#2137); +#2137 = AXIS2_PLACEMENT_3D('',#2138,#2139,#2140); +#2138 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#2139 = DIRECTION('',(0.,0.,1.)); +#2140 = DIRECTION('',(1.,0.,-0.)); +#2141 = ADVANCED_FACE('',(#2142),#2161,.T.); +#2142 = FACE_BOUND('',#2143,.T.); +#2143 = EDGE_LOOP('',(#2144,#2152,#2159,#2160)); +#2144 = ORIENTED_EDGE('',*,*,#2145,.T.); +#2145 = EDGE_CURVE('',#1927,#2146,#2148,.T.); +#2146 = VERTEX_POINT('',#2147); +#2147 = CARTESIAN_POINT('',(0.5,-0.37,0.74)); +#2148 = LINE('',#2149,#2150); +#2149 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#2150 = VECTOR('',#2151,1.); +#2151 = DIRECTION('',(1.,0.,0.)); +#2152 = ORIENTED_EDGE('',*,*,#2153,.T.); +#2153 = EDGE_CURVE('',#2146,#2123,#2154,.T.); +#2154 = CIRCLE('',#2155,3.E-02); +#2155 = AXIS2_PLACEMENT_3D('',#2156,#2157,#2158); +#2156 = CARTESIAN_POINT('',(0.5,-0.34,0.74)); +#2157 = DIRECTION('',(-1.,0.,0.)); +#2158 = DIRECTION('',(0.,0.,1.)); +#2159 = ORIENTED_EDGE('',*,*,#2122,.F.); +#2160 = ORIENTED_EDGE('',*,*,#1934,.F.); +#2161 = CYLINDRICAL_SURFACE('',#2162,3.E-02); +#2162 = AXIS2_PLACEMENT_3D('',#2163,#2164,#2165); +#2163 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#2164 = DIRECTION('',(1.,0.,0.)); +#2165 = DIRECTION('',(0.,-1.,0.)); +#2166 = ADVANCED_FACE('',(#2167),#2178,.F.); +#2167 = FACE_BOUND('',#2168,.F.); +#2168 = EDGE_LOOP('',(#2169,#2175,#2176,#2177)); +#2169 = ORIENTED_EDGE('',*,*,#2170,.F.); +#2170 = EDGE_CURVE('',#2001,#2146,#2171,.T.); +#2171 = LINE('',#2172,#2173); +#2172 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#2173 = VECTOR('',#2174,1.); +#2174 = DIRECTION('',(0.,0.,1.)); +#2175 = ORIENTED_EDGE('',*,*,#2009,.F.); +#2176 = ORIENTED_EDGE('',*,*,#1926,.T.); +#2177 = ORIENTED_EDGE('',*,*,#2145,.T.); +#2178 = PLANE('',#2179); +#2179 = AXIS2_PLACEMENT_3D('',#2180,#2181,#2182); +#2180 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#2181 = DIRECTION('',(0.,1.,0.)); +#2182 = DIRECTION('',(0.,-0.,1.)); +#2183 = ADVANCED_FACE('',(#2184,#2254),#2264,.F.); +#2184 = FACE_BOUND('',#2185,.F.); +#2185 = EDGE_LOOP('',(#2186,#2196,#2205,#2213,#2222,#2230,#2239,#2247)); +#2186 = ORIENTED_EDGE('',*,*,#2187,.F.); +#2187 = EDGE_CURVE('',#2188,#2190,#2192,.T.); +#2188 = VERTEX_POINT('',#2189); +#2189 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#2190 = VERTEX_POINT('',#2191); +#2191 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#2192 = LINE('',#2193,#2194); +#2193 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2194 = VECTOR('',#2195,1.); +#2195 = DIRECTION('',(0.,0.,1.)); +#2196 = ORIENTED_EDGE('',*,*,#2197,.T.); +#2197 = EDGE_CURVE('',#2188,#2198,#2200,.T.); +#2198 = VERTEX_POINT('',#2199); +#2199 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#2200 = CIRCLE('',#2201,3.E-02); +#2201 = AXIS2_PLACEMENT_3D('',#2202,#2203,#2204); +#2202 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#2203 = DIRECTION('',(1.,0.,-0.)); +#2204 = DIRECTION('',(0.,0.,1.)); +#2205 = ORIENTED_EDGE('',*,*,#2206,.T.); +#2206 = EDGE_CURVE('',#2198,#2207,#2209,.T.); +#2207 = VERTEX_POINT('',#2208); +#2208 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#2209 = LINE('',#2210,#2211); +#2210 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2211 = VECTOR('',#2212,1.); +#2212 = DIRECTION('',(0.,1.,0.)); +#2213 = ORIENTED_EDGE('',*,*,#2214,.F.); +#2214 = EDGE_CURVE('',#2215,#2207,#2217,.T.); +#2215 = VERTEX_POINT('',#2216); +#2216 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#2217 = CIRCLE('',#2218,3.E-02); +#2218 = AXIS2_PLACEMENT_3D('',#2219,#2220,#2221); +#2219 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#2220 = DIRECTION('',(-1.,0.,0.)); +#2221 = DIRECTION('',(0.,0.,1.)); +#2222 = ORIENTED_EDGE('',*,*,#2223,.T.); +#2223 = EDGE_CURVE('',#2215,#2224,#2226,.T.); +#2224 = VERTEX_POINT('',#2225); +#2225 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#2226 = LINE('',#2227,#2228); +#2227 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#2228 = VECTOR('',#2229,1.); +#2229 = DIRECTION('',(0.,0.,1.)); +#2230 = ORIENTED_EDGE('',*,*,#2231,.T.); +#2231 = EDGE_CURVE('',#2224,#2232,#2234,.T.); +#2232 = VERTEX_POINT('',#2233); +#2233 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#2234 = CIRCLE('',#2235,3.E-02); +#2235 = AXIS2_PLACEMENT_3D('',#2236,#2237,#2238); +#2236 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#2237 = DIRECTION('',(1.,0.,-0.)); +#2238 = DIRECTION('',(0.,0.,1.)); +#2239 = ORIENTED_EDGE('',*,*,#2240,.F.); +#2240 = EDGE_CURVE('',#2241,#2232,#2243,.T.); +#2241 = VERTEX_POINT('',#2242); +#2242 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#2243 = LINE('',#2244,#2245); +#2244 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#2245 = VECTOR('',#2246,1.); +#2246 = DIRECTION('',(0.,1.,0.)); +#2247 = ORIENTED_EDGE('',*,*,#2248,.F.); +#2248 = EDGE_CURVE('',#2190,#2241,#2249,.T.); +#2249 = CIRCLE('',#2250,3.E-02); +#2250 = AXIS2_PLACEMENT_3D('',#2251,#2252,#2253); +#2251 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#2252 = DIRECTION('',(-1.,0.,0.)); +#2253 = DIRECTION('',(0.,0.,1.)); +#2254 = FACE_BOUND('',#2255,.F.); +#2255 = EDGE_LOOP('',(#2256,#2257,#2258,#2259,#2260,#2261,#2262,#2263)); +#2256 = ORIENTED_EDGE('',*,*,#2000,.F.); +#2257 = ORIENTED_EDGE('',*,*,#2170,.T.); +#2258 = ORIENTED_EDGE('',*,*,#2153,.T.); +#2259 = ORIENTED_EDGE('',*,*,#2130,.T.); +#2260 = ORIENTED_EDGE('',*,*,#2105,.F.); +#2261 = ORIENTED_EDGE('',*,*,#2072,.F.); +#2262 = ORIENTED_EDGE('',*,*,#2055,.T.); +#2263 = ORIENTED_EDGE('',*,*,#2025,.F.); +#2264 = PLANE('',#2265); +#2265 = AXIS2_PLACEMENT_3D('',#2266,#2267,#2268); +#2266 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2267 = DIRECTION('',(1.,0.,0.)); +#2268 = DIRECTION('',(0.,0.,1.)); +#2269 = ADVANCED_FACE('',(#2270),#2295,.F.); +#2270 = FACE_BOUND('',#2271,.F.); +#2271 = EDGE_LOOP('',(#2272,#2282,#2288,#2289)); +#2272 = ORIENTED_EDGE('',*,*,#2273,.F.); +#2273 = EDGE_CURVE('',#2274,#2276,#2278,.T.); +#2274 = VERTEX_POINT('',#2275); +#2275 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#2276 = VERTEX_POINT('',#2277); +#2277 = CARTESIAN_POINT('',(0.8,-0.4,0.77)); +#2278 = LINE('',#2279,#2280); +#2279 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#2280 = VECTOR('',#2281,1.); +#2281 = DIRECTION('',(0.,0.,1.)); +#2282 = ORIENTED_EDGE('',*,*,#2283,.F.); +#2283 = EDGE_CURVE('',#2188,#2274,#2284,.T.); +#2284 = LINE('',#2285,#2286); +#2285 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#2286 = VECTOR('',#2287,1.); +#2287 = DIRECTION('',(1.,0.,0.)); +#2288 = ORIENTED_EDGE('',*,*,#2187,.T.); +#2289 = ORIENTED_EDGE('',*,*,#2290,.T.); +#2290 = EDGE_CURVE('',#2190,#2276,#2291,.T.); +#2291 = LINE('',#2292,#2293); +#2292 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#2293 = VECTOR('',#2294,1.); +#2294 = DIRECTION('',(1.,0.,0.)); +#2295 = PLANE('',#2296); +#2296 = AXIS2_PLACEMENT_3D('',#2297,#2298,#2299); +#2297 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2298 = DIRECTION('',(0.,1.,0.)); +#2299 = DIRECTION('',(0.,-0.,1.)); +#2300 = ADVANCED_FACE('',(#2301),#2320,.T.); +#2301 = FACE_BOUND('',#2302,.T.); +#2302 = EDGE_LOOP('',(#2303,#2304,#2312,#2319)); +#2303 = ORIENTED_EDGE('',*,*,#2197,.T.); +#2304 = ORIENTED_EDGE('',*,*,#2305,.T.); +#2305 = EDGE_CURVE('',#2198,#2306,#2308,.T.); +#2306 = VERTEX_POINT('',#2307); +#2307 = CARTESIAN_POINT('',(0.8,-0.37,0.)); +#2308 = LINE('',#2309,#2310); +#2309 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#2310 = VECTOR('',#2311,1.); +#2311 = DIRECTION('',(1.,0.,0.)); +#2312 = ORIENTED_EDGE('',*,*,#2313,.F.); +#2313 = EDGE_CURVE('',#2274,#2306,#2314,.T.); +#2314 = CIRCLE('',#2315,3.E-02); +#2315 = AXIS2_PLACEMENT_3D('',#2316,#2317,#2318); +#2316 = CARTESIAN_POINT('',(0.8,-0.37,3.E-02)); +#2317 = DIRECTION('',(1.,0.,-0.)); +#2318 = DIRECTION('',(0.,0.,1.)); +#2319 = ORIENTED_EDGE('',*,*,#2283,.F.); +#2320 = CYLINDRICAL_SURFACE('',#2321,3.E-02); +#2321 = AXIS2_PLACEMENT_3D('',#2322,#2323,#2324); +#2322 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#2323 = DIRECTION('',(1.,0.,0.)); +#2324 = DIRECTION('',(0.,-1.,0.)); +#2325 = ADVANCED_FACE('',(#2326),#2345,.T.); +#2326 = FACE_BOUND('',#2327,.T.); +#2327 = EDGE_LOOP('',(#2328,#2329,#2338,#2344)); +#2328 = ORIENTED_EDGE('',*,*,#2290,.T.); +#2329 = ORIENTED_EDGE('',*,*,#2330,.T.); +#2330 = EDGE_CURVE('',#2276,#2331,#2333,.T.); +#2331 = VERTEX_POINT('',#2332); +#2332 = CARTESIAN_POINT('',(0.8,-0.37,0.8)); +#2333 = CIRCLE('',#2334,3.E-02); +#2334 = AXIS2_PLACEMENT_3D('',#2335,#2336,#2337); +#2335 = CARTESIAN_POINT('',(0.8,-0.37,0.77)); +#2336 = DIRECTION('',(-1.,0.,0.)); +#2337 = DIRECTION('',(0.,0.,1.)); +#2338 = ORIENTED_EDGE('',*,*,#2339,.F.); +#2339 = EDGE_CURVE('',#2241,#2331,#2340,.T.); +#2340 = LINE('',#2341,#2342); +#2341 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#2342 = VECTOR('',#2343,1.); +#2343 = DIRECTION('',(1.,0.,0.)); +#2344 = ORIENTED_EDGE('',*,*,#2248,.F.); +#2345 = CYLINDRICAL_SURFACE('',#2346,3.E-02); +#2346 = AXIS2_PLACEMENT_3D('',#2347,#2348,#2349); +#2347 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#2348 = DIRECTION('',(1.,0.,0.)); +#2349 = DIRECTION('',(0.,-1.,0.)); +#2350 = ADVANCED_FACE('',(#2351),#2369,.F.); +#2351 = FACE_BOUND('',#2352,.F.); +#2352 = EDGE_LOOP('',(#2353,#2354,#2355,#2363)); +#2353 = ORIENTED_EDGE('',*,*,#2206,.F.); +#2354 = ORIENTED_EDGE('',*,*,#2305,.T.); +#2355 = ORIENTED_EDGE('',*,*,#2356,.T.); +#2356 = EDGE_CURVE('',#2306,#2357,#2359,.T.); +#2357 = VERTEX_POINT('',#2358); +#2358 = CARTESIAN_POINT('',(0.8,0.37,0.)); +#2359 = LINE('',#2360,#2361); +#2360 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#2361 = VECTOR('',#2362,1.); +#2362 = DIRECTION('',(0.,1.,0.)); +#2363 = ORIENTED_EDGE('',*,*,#2364,.F.); +#2364 = EDGE_CURVE('',#2207,#2357,#2365,.T.); +#2365 = LINE('',#2366,#2367); +#2366 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#2367 = VECTOR('',#2368,1.); +#2368 = DIRECTION('',(1.,0.,0.)); +#2369 = PLANE('',#2370); +#2370 = AXIS2_PLACEMENT_3D('',#2371,#2372,#2373); +#2371 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#2372 = DIRECTION('',(0.,0.,1.)); +#2373 = DIRECTION('',(1.,0.,-0.)); +#2374 = ADVANCED_FACE('',(#2375),#2393,.T.); +#2375 = FACE_BOUND('',#2376,.T.); +#2376 = EDGE_LOOP('',(#2377,#2378,#2379,#2387)); +#2377 = ORIENTED_EDGE('',*,*,#2240,.F.); +#2378 = ORIENTED_EDGE('',*,*,#2339,.T.); +#2379 = ORIENTED_EDGE('',*,*,#2380,.T.); +#2380 = EDGE_CURVE('',#2331,#2381,#2383,.T.); +#2381 = VERTEX_POINT('',#2382); +#2382 = CARTESIAN_POINT('',(0.8,0.37,0.8)); +#2383 = LINE('',#2384,#2385); +#2384 = CARTESIAN_POINT('',(0.8,-0.4,0.8)); +#2385 = VECTOR('',#2386,1.); +#2386 = DIRECTION('',(0.,1.,0.)); +#2387 = ORIENTED_EDGE('',*,*,#2388,.F.); +#2388 = EDGE_CURVE('',#2232,#2381,#2389,.T.); +#2389 = LINE('',#2390,#2391); +#2390 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#2391 = VECTOR('',#2392,1.); +#2392 = DIRECTION('',(1.,0.,0.)); +#2393 = PLANE('',#2394); +#2394 = AXIS2_PLACEMENT_3D('',#2395,#2396,#2397); +#2395 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#2396 = DIRECTION('',(0.,0.,1.)); +#2397 = DIRECTION('',(1.,0.,-0.)); +#2398 = ADVANCED_FACE('',(#2399),#2418,.T.); +#2399 = FACE_BOUND('',#2400,.T.); +#2400 = EDGE_LOOP('',(#2401,#2409,#2416,#2417)); +#2401 = ORIENTED_EDGE('',*,*,#2402,.T.); +#2402 = EDGE_CURVE('',#2215,#2403,#2405,.T.); +#2403 = VERTEX_POINT('',#2404); +#2404 = CARTESIAN_POINT('',(0.8,0.4,3.E-02)); +#2405 = LINE('',#2406,#2407); +#2406 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#2407 = VECTOR('',#2408,1.); +#2408 = DIRECTION('',(1.,0.,0.)); +#2409 = ORIENTED_EDGE('',*,*,#2410,.T.); +#2410 = EDGE_CURVE('',#2403,#2357,#2411,.T.); +#2411 = CIRCLE('',#2412,3.E-02); +#2412 = AXIS2_PLACEMENT_3D('',#2413,#2414,#2415); +#2413 = CARTESIAN_POINT('',(0.8,0.37,3.E-02)); +#2414 = DIRECTION('',(-1.,0.,0.)); +#2415 = DIRECTION('',(0.,0.,1.)); +#2416 = ORIENTED_EDGE('',*,*,#2364,.F.); +#2417 = ORIENTED_EDGE('',*,*,#2214,.F.); +#2418 = CYLINDRICAL_SURFACE('',#2419,3.E-02); +#2419 = AXIS2_PLACEMENT_3D('',#2420,#2421,#2422); +#2420 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#2421 = DIRECTION('',(1.,0.,0.)); +#2422 = DIRECTION('',(-0.,1.,0.)); +#2423 = ADVANCED_FACE('',(#2424),#2443,.T.); +#2424 = FACE_BOUND('',#2425,.T.); +#2425 = EDGE_LOOP('',(#2426,#2427,#2428,#2437)); +#2426 = ORIENTED_EDGE('',*,*,#2231,.T.); +#2427 = ORIENTED_EDGE('',*,*,#2388,.T.); +#2428 = ORIENTED_EDGE('',*,*,#2429,.F.); +#2429 = EDGE_CURVE('',#2430,#2381,#2432,.T.); +#2430 = VERTEX_POINT('',#2431); +#2431 = CARTESIAN_POINT('',(0.8,0.4,0.77)); +#2432 = CIRCLE('',#2433,3.E-02); +#2433 = AXIS2_PLACEMENT_3D('',#2434,#2435,#2436); +#2434 = CARTESIAN_POINT('',(0.8,0.37,0.77)); +#2435 = DIRECTION('',(1.,0.,-0.)); +#2436 = DIRECTION('',(0.,0.,1.)); +#2437 = ORIENTED_EDGE('',*,*,#2438,.F.); +#2438 = EDGE_CURVE('',#2224,#2430,#2439,.T.); +#2439 = LINE('',#2440,#2441); +#2440 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#2441 = VECTOR('',#2442,1.); +#2442 = DIRECTION('',(1.,0.,0.)); +#2443 = CYLINDRICAL_SURFACE('',#2444,3.E-02); +#2444 = AXIS2_PLACEMENT_3D('',#2445,#2446,#2447); +#2445 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#2446 = DIRECTION('',(1.,0.,0.)); +#2447 = DIRECTION('',(-0.,1.,0.)); +#2448 = ADVANCED_FACE('',(#2449),#2460,.T.); +#2449 = FACE_BOUND('',#2450,.T.); +#2450 = EDGE_LOOP('',(#2451,#2457,#2458,#2459)); +#2451 = ORIENTED_EDGE('',*,*,#2452,.F.); +#2452 = EDGE_CURVE('',#2403,#2430,#2453,.T.); +#2453 = LINE('',#2454,#2455); +#2454 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#2455 = VECTOR('',#2456,1.); +#2456 = DIRECTION('',(0.,0.,1.)); +#2457 = ORIENTED_EDGE('',*,*,#2402,.F.); +#2458 = ORIENTED_EDGE('',*,*,#2223,.T.); +#2459 = ORIENTED_EDGE('',*,*,#2438,.T.); +#2460 = PLANE('',#2461); +#2461 = AXIS2_PLACEMENT_3D('',#2462,#2463,#2464); +#2462 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#2463 = DIRECTION('',(0.,1.,0.)); +#2464 = DIRECTION('',(0.,-0.,1.)); +#2465 = ADVANCED_FACE('',(#2466),#2476,.T.); +#2466 = FACE_BOUND('',#2467,.T.); +#2467 = EDGE_LOOP('',(#2468,#2469,#2470,#2471,#2472,#2473,#2474,#2475)); +#2468 = ORIENTED_EDGE('',*,*,#2273,.F.); +#2469 = ORIENTED_EDGE('',*,*,#2313,.T.); +#2470 = ORIENTED_EDGE('',*,*,#2356,.T.); +#2471 = ORIENTED_EDGE('',*,*,#2410,.F.); +#2472 = ORIENTED_EDGE('',*,*,#2452,.T.); +#2473 = ORIENTED_EDGE('',*,*,#2429,.T.); +#2474 = ORIENTED_EDGE('',*,*,#2380,.F.); +#2475 = ORIENTED_EDGE('',*,*,#2330,.F.); +#2476 = PLANE('',#2477); +#2477 = AXIS2_PLACEMENT_3D('',#2478,#2479,#2480); +#2478 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#2479 = DIRECTION('',(1.,0.,0.)); +#2480 = DIRECTION('',(0.,0.,1.)); +#2481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2485)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#2482,#2483,#2484)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#2482 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#2483 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#2484 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#2485 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#2482, + 'distance_accuracy_value','confusion accuracy'); +#2486 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2487,#2489); +#2487 = ( REPRESENTATION_RELATIONSHIP('','',#1626,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2488) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2488 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19); +#2489 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2490); +#2490 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','C10','',#5,#1621,$); +#2491 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#1623)); +#2492 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2493,#2495); +#2493 = ( REPRESENTATION_RELATIONSHIP('','',#1626,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2494) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2494 = ITEM_DEFINED_TRANSFORMATION('','',#11,#23); +#2495 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2496); +#2496 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','C13','',#5,#1621,$); +#2497 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2498,#2500); +#2498 = ( REPRESENTATION_RELATIONSHIP('','',#1626,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2499) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2499 = ITEM_DEFINED_TRANSFORMATION('','',#11,#27); +#2500 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2501); +#2501 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('4','C14','',#5,#1621,$); +#2502 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2503,#2505); +#2503 = ( REPRESENTATION_RELATIONSHIP('','',#1626,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2504) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2504 = ITEM_DEFINED_TRANSFORMATION('','',#11,#31); +#2505 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2506); +#2506 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('5','C15','',#5,#1621,$); +#2507 = SHAPE_DEFINITION_REPRESENTATION(#2508,#2514); +#2508 = PRODUCT_DEFINITION_SHAPE('','',#2509); +#2509 = PRODUCT_DEFINITION('design','',#2510,#2513); +#2510 = PRODUCT_DEFINITION_FORMATION('','',#2511); +#2511 = PRODUCT('C_1206_3216Metric','C_1206_3216Metric','',(#2512)); +#2512 = PRODUCT_CONTEXT('',#2,'mechanical'); +#2513 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#2514 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#2515),#3369); +#2515 = MANIFOLD_SOLID_BREP('',#2516); +#2516 = CLOSED_SHELL('',(#2517,#2593,#2624,#2649,#2674,#2698,#2722,#2747 + ,#2772,#2789,#2875,#2907,#2931,#2956,#2980,#3005,#3029,#3054,#3071, + #3157,#3188,#3213,#3238,#3262,#3286,#3311,#3336,#3353)); +#2517 = ADVANCED_FACE('',(#2518),#2588,.F.); +#2518 = FACE_BOUND('',#2519,.F.); +#2519 = EDGE_LOOP('',(#2520,#2530,#2539,#2547,#2556,#2564,#2573,#2581)); +#2520 = ORIENTED_EDGE('',*,*,#2521,.F.); +#2521 = EDGE_CURVE('',#2522,#2524,#2526,.T.); +#2522 = VERTEX_POINT('',#2523); +#2523 = CARTESIAN_POINT('',(-1.6,-0.8,4.E-02)); +#2524 = VERTEX_POINT('',#2525); +#2525 = CARTESIAN_POINT('',(-1.6,-0.8,1.56)); +#2526 = LINE('',#2527,#2528); +#2527 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2528 = VECTOR('',#2529,1.); +#2529 = DIRECTION('',(0.,0.,1.)); +#2530 = ORIENTED_EDGE('',*,*,#2531,.T.); +#2531 = EDGE_CURVE('',#2522,#2532,#2534,.T.); +#2532 = VERTEX_POINT('',#2533); +#2533 = CARTESIAN_POINT('',(-1.6,-0.76,0.)); +#2534 = CIRCLE('',#2535,4.E-02); +#2535 = AXIS2_PLACEMENT_3D('',#2536,#2537,#2538); +#2536 = CARTESIAN_POINT('',(-1.6,-0.76,4.E-02)); +#2537 = DIRECTION('',(1.,0.,-0.)); +#2538 = DIRECTION('',(0.,0.,1.)); +#2539 = ORIENTED_EDGE('',*,*,#2540,.T.); +#2540 = EDGE_CURVE('',#2532,#2541,#2543,.T.); +#2541 = VERTEX_POINT('',#2542); +#2542 = CARTESIAN_POINT('',(-1.6,0.76,0.)); +#2543 = LINE('',#2544,#2545); +#2544 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2545 = VECTOR('',#2546,1.); +#2546 = DIRECTION('',(0.,1.,0.)); +#2547 = ORIENTED_EDGE('',*,*,#2548,.F.); +#2548 = EDGE_CURVE('',#2549,#2541,#2551,.T.); +#2549 = VERTEX_POINT('',#2550); +#2550 = CARTESIAN_POINT('',(-1.6,0.8,4.E-02)); +#2551 = CIRCLE('',#2552,4.E-02); +#2552 = AXIS2_PLACEMENT_3D('',#2553,#2554,#2555); +#2553 = CARTESIAN_POINT('',(-1.6,0.76,4.E-02)); +#2554 = DIRECTION('',(-1.,0.,0.)); +#2555 = DIRECTION('',(0.,0.,1.)); +#2556 = ORIENTED_EDGE('',*,*,#2557,.T.); +#2557 = EDGE_CURVE('',#2549,#2558,#2560,.T.); +#2558 = VERTEX_POINT('',#2559); +#2559 = CARTESIAN_POINT('',(-1.6,0.8,1.56)); +#2560 = LINE('',#2561,#2562); +#2561 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#2562 = VECTOR('',#2563,1.); +#2563 = DIRECTION('',(0.,0.,1.)); +#2564 = ORIENTED_EDGE('',*,*,#2565,.T.); +#2565 = EDGE_CURVE('',#2558,#2566,#2568,.T.); +#2566 = VERTEX_POINT('',#2567); +#2567 = CARTESIAN_POINT('',(-1.6,0.76,1.6)); +#2568 = CIRCLE('',#2569,4.E-02); +#2569 = AXIS2_PLACEMENT_3D('',#2570,#2571,#2572); +#2570 = CARTESIAN_POINT('',(-1.6,0.76,1.56)); +#2571 = DIRECTION('',(1.,0.,-0.)); +#2572 = DIRECTION('',(0.,0.,1.)); +#2573 = ORIENTED_EDGE('',*,*,#2574,.F.); +#2574 = EDGE_CURVE('',#2575,#2566,#2577,.T.); +#2575 = VERTEX_POINT('',#2576); +#2576 = CARTESIAN_POINT('',(-1.6,-0.76,1.6)); +#2577 = LINE('',#2578,#2579); +#2578 = CARTESIAN_POINT('',(-1.6,-0.8,1.6)); +#2579 = VECTOR('',#2580,1.); +#2580 = DIRECTION('',(0.,1.,0.)); +#2581 = ORIENTED_EDGE('',*,*,#2582,.F.); +#2582 = EDGE_CURVE('',#2524,#2575,#2583,.T.); +#2583 = CIRCLE('',#2584,4.E-02); +#2584 = AXIS2_PLACEMENT_3D('',#2585,#2586,#2587); +#2585 = CARTESIAN_POINT('',(-1.6,-0.76,1.56)); +#2586 = DIRECTION('',(-1.,0.,0.)); +#2587 = DIRECTION('',(0.,0.,1.)); +#2588 = PLANE('',#2589); +#2589 = AXIS2_PLACEMENT_3D('',#2590,#2591,#2592); +#2590 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2591 = DIRECTION('',(1.,0.,0.)); +#2592 = DIRECTION('',(0.,0.,1.)); +#2593 = ADVANCED_FACE('',(#2594),#2619,.F.); +#2594 = FACE_BOUND('',#2595,.F.); +#2595 = EDGE_LOOP('',(#2596,#2606,#2612,#2613)); +#2596 = ORIENTED_EDGE('',*,*,#2597,.F.); +#2597 = EDGE_CURVE('',#2598,#2600,#2602,.T.); +#2598 = VERTEX_POINT('',#2599); +#2599 = CARTESIAN_POINT('',(-1.2,-0.8,4.E-02)); +#2600 = VERTEX_POINT('',#2601); +#2601 = CARTESIAN_POINT('',(-1.2,-0.8,1.56)); +#2602 = LINE('',#2603,#2604); +#2603 = CARTESIAN_POINT('',(-1.2,-0.8,0.)); +#2604 = VECTOR('',#2605,1.); +#2605 = DIRECTION('',(0.,0.,1.)); +#2606 = ORIENTED_EDGE('',*,*,#2607,.F.); +#2607 = EDGE_CURVE('',#2522,#2598,#2608,.T.); +#2608 = LINE('',#2609,#2610); +#2609 = CARTESIAN_POINT('',(-1.6,-0.8,4.E-02)); +#2610 = VECTOR('',#2611,1.); +#2611 = DIRECTION('',(1.,0.,0.)); +#2612 = ORIENTED_EDGE('',*,*,#2521,.T.); +#2613 = ORIENTED_EDGE('',*,*,#2614,.T.); +#2614 = EDGE_CURVE('',#2524,#2600,#2615,.T.); +#2615 = LINE('',#2616,#2617); +#2616 = CARTESIAN_POINT('',(-1.6,-0.8,1.56)); +#2617 = VECTOR('',#2618,1.); +#2618 = DIRECTION('',(1.,0.,0.)); +#2619 = PLANE('',#2620); +#2620 = AXIS2_PLACEMENT_3D('',#2621,#2622,#2623); +#2621 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2622 = DIRECTION('',(0.,1.,0.)); +#2623 = DIRECTION('',(0.,-0.,1.)); +#2624 = ADVANCED_FACE('',(#2625),#2644,.T.); +#2625 = FACE_BOUND('',#2626,.T.); +#2626 = EDGE_LOOP('',(#2627,#2628,#2636,#2643)); +#2627 = ORIENTED_EDGE('',*,*,#2531,.T.); +#2628 = ORIENTED_EDGE('',*,*,#2629,.T.); +#2629 = EDGE_CURVE('',#2532,#2630,#2632,.T.); +#2630 = VERTEX_POINT('',#2631); +#2631 = CARTESIAN_POINT('',(-1.2,-0.76,0.)); +#2632 = LINE('',#2633,#2634); +#2633 = CARTESIAN_POINT('',(-1.6,-0.76,0.)); +#2634 = VECTOR('',#2635,1.); +#2635 = DIRECTION('',(1.,0.,0.)); +#2636 = ORIENTED_EDGE('',*,*,#2637,.F.); +#2637 = EDGE_CURVE('',#2598,#2630,#2638,.T.); +#2638 = CIRCLE('',#2639,4.E-02); +#2639 = AXIS2_PLACEMENT_3D('',#2640,#2641,#2642); +#2640 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#2641 = DIRECTION('',(1.,0.,-0.)); +#2642 = DIRECTION('',(0.,0.,1.)); +#2643 = ORIENTED_EDGE('',*,*,#2607,.F.); +#2644 = CYLINDRICAL_SURFACE('',#2645,4.E-02); +#2645 = AXIS2_PLACEMENT_3D('',#2646,#2647,#2648); +#2646 = CARTESIAN_POINT('',(-1.6,-0.76,4.E-02)); +#2647 = DIRECTION('',(1.,0.,0.)); +#2648 = DIRECTION('',(0.,-1.,0.)); +#2649 = ADVANCED_FACE('',(#2650),#2669,.T.); +#2650 = FACE_BOUND('',#2651,.T.); +#2651 = EDGE_LOOP('',(#2652,#2653,#2662,#2668)); +#2652 = ORIENTED_EDGE('',*,*,#2614,.T.); +#2653 = ORIENTED_EDGE('',*,*,#2654,.T.); +#2654 = EDGE_CURVE('',#2600,#2655,#2657,.T.); +#2655 = VERTEX_POINT('',#2656); +#2656 = CARTESIAN_POINT('',(-1.2,-0.76,1.6)); +#2657 = CIRCLE('',#2658,4.E-02); +#2658 = AXIS2_PLACEMENT_3D('',#2659,#2660,#2661); +#2659 = CARTESIAN_POINT('',(-1.2,-0.76,1.56)); +#2660 = DIRECTION('',(-1.,0.,0.)); +#2661 = DIRECTION('',(0.,0.,1.)); +#2662 = ORIENTED_EDGE('',*,*,#2663,.F.); +#2663 = EDGE_CURVE('',#2575,#2655,#2664,.T.); +#2664 = LINE('',#2665,#2666); +#2665 = CARTESIAN_POINT('',(-1.6,-0.76,1.6)); +#2666 = VECTOR('',#2667,1.); +#2667 = DIRECTION('',(1.,0.,0.)); +#2668 = ORIENTED_EDGE('',*,*,#2582,.F.); +#2669 = CYLINDRICAL_SURFACE('',#2670,4.E-02); +#2670 = AXIS2_PLACEMENT_3D('',#2671,#2672,#2673); +#2671 = CARTESIAN_POINT('',(-1.6,-0.76,1.56)); +#2672 = DIRECTION('',(1.,0.,0.)); +#2673 = DIRECTION('',(0.,-1.,0.)); +#2674 = ADVANCED_FACE('',(#2675),#2693,.F.); +#2675 = FACE_BOUND('',#2676,.F.); +#2676 = EDGE_LOOP('',(#2677,#2678,#2679,#2687)); +#2677 = ORIENTED_EDGE('',*,*,#2540,.F.); +#2678 = ORIENTED_EDGE('',*,*,#2629,.T.); +#2679 = ORIENTED_EDGE('',*,*,#2680,.T.); +#2680 = EDGE_CURVE('',#2630,#2681,#2683,.T.); +#2681 = VERTEX_POINT('',#2682); +#2682 = CARTESIAN_POINT('',(-1.2,0.76,0.)); +#2683 = LINE('',#2684,#2685); +#2684 = CARTESIAN_POINT('',(-1.2,-0.8,0.)); +#2685 = VECTOR('',#2686,1.); +#2686 = DIRECTION('',(0.,1.,0.)); +#2687 = ORIENTED_EDGE('',*,*,#2688,.F.); +#2688 = EDGE_CURVE('',#2541,#2681,#2689,.T.); +#2689 = LINE('',#2690,#2691); +#2690 = CARTESIAN_POINT('',(-1.6,0.76,0.)); +#2691 = VECTOR('',#2692,1.); +#2692 = DIRECTION('',(1.,0.,0.)); +#2693 = PLANE('',#2694); +#2694 = AXIS2_PLACEMENT_3D('',#2695,#2696,#2697); +#2695 = CARTESIAN_POINT('',(-1.6,-0.8,0.)); +#2696 = DIRECTION('',(0.,0.,1.)); +#2697 = DIRECTION('',(1.,0.,-0.)); +#2698 = ADVANCED_FACE('',(#2699),#2717,.T.); +#2699 = FACE_BOUND('',#2700,.T.); +#2700 = EDGE_LOOP('',(#2701,#2702,#2703,#2711)); +#2701 = ORIENTED_EDGE('',*,*,#2574,.F.); +#2702 = ORIENTED_EDGE('',*,*,#2663,.T.); +#2703 = ORIENTED_EDGE('',*,*,#2704,.T.); +#2704 = EDGE_CURVE('',#2655,#2705,#2707,.T.); +#2705 = VERTEX_POINT('',#2706); +#2706 = CARTESIAN_POINT('',(-1.2,0.76,1.6)); +#2707 = LINE('',#2708,#2709); +#2708 = CARTESIAN_POINT('',(-1.2,-0.8,1.6)); +#2709 = VECTOR('',#2710,1.); +#2710 = DIRECTION('',(0.,1.,0.)); +#2711 = ORIENTED_EDGE('',*,*,#2712,.F.); +#2712 = EDGE_CURVE('',#2566,#2705,#2713,.T.); +#2713 = LINE('',#2714,#2715); +#2714 = CARTESIAN_POINT('',(-1.6,0.76,1.6)); +#2715 = VECTOR('',#2716,1.); +#2716 = DIRECTION('',(1.,0.,0.)); +#2717 = PLANE('',#2718); +#2718 = AXIS2_PLACEMENT_3D('',#2719,#2720,#2721); +#2719 = CARTESIAN_POINT('',(-1.6,-0.8,1.6)); +#2720 = DIRECTION('',(0.,0.,1.)); +#2721 = DIRECTION('',(1.,0.,-0.)); +#2722 = ADVANCED_FACE('',(#2723),#2742,.T.); +#2723 = FACE_BOUND('',#2724,.T.); +#2724 = EDGE_LOOP('',(#2725,#2733,#2740,#2741)); +#2725 = ORIENTED_EDGE('',*,*,#2726,.T.); +#2726 = EDGE_CURVE('',#2549,#2727,#2729,.T.); +#2727 = VERTEX_POINT('',#2728); +#2728 = CARTESIAN_POINT('',(-1.2,0.8,4.E-02)); +#2729 = LINE('',#2730,#2731); +#2730 = CARTESIAN_POINT('',(-1.6,0.8,4.E-02)); +#2731 = VECTOR('',#2732,1.); +#2732 = DIRECTION('',(1.,0.,0.)); +#2733 = ORIENTED_EDGE('',*,*,#2734,.T.); +#2734 = EDGE_CURVE('',#2727,#2681,#2735,.T.); +#2735 = CIRCLE('',#2736,4.E-02); +#2736 = AXIS2_PLACEMENT_3D('',#2737,#2738,#2739); +#2737 = CARTESIAN_POINT('',(-1.2,0.76,4.E-02)); +#2738 = DIRECTION('',(-1.,0.,0.)); +#2739 = DIRECTION('',(0.,0.,1.)); +#2740 = ORIENTED_EDGE('',*,*,#2688,.F.); +#2741 = ORIENTED_EDGE('',*,*,#2548,.F.); +#2742 = CYLINDRICAL_SURFACE('',#2743,4.E-02); +#2743 = AXIS2_PLACEMENT_3D('',#2744,#2745,#2746); +#2744 = CARTESIAN_POINT('',(-1.6,0.76,4.E-02)); +#2745 = DIRECTION('',(1.,0.,0.)); +#2746 = DIRECTION('',(-0.,1.,0.)); +#2747 = ADVANCED_FACE('',(#2748),#2767,.T.); +#2748 = FACE_BOUND('',#2749,.T.); +#2749 = EDGE_LOOP('',(#2750,#2751,#2752,#2761)); +#2750 = ORIENTED_EDGE('',*,*,#2565,.T.); +#2751 = ORIENTED_EDGE('',*,*,#2712,.T.); +#2752 = ORIENTED_EDGE('',*,*,#2753,.F.); +#2753 = EDGE_CURVE('',#2754,#2705,#2756,.T.); +#2754 = VERTEX_POINT('',#2755); +#2755 = CARTESIAN_POINT('',(-1.2,0.8,1.56)); +#2756 = CIRCLE('',#2757,4.E-02); +#2757 = AXIS2_PLACEMENT_3D('',#2758,#2759,#2760); +#2758 = CARTESIAN_POINT('',(-1.2,0.76,1.56)); +#2759 = DIRECTION('',(1.,0.,-0.)); +#2760 = DIRECTION('',(0.,0.,1.)); +#2761 = ORIENTED_EDGE('',*,*,#2762,.F.); +#2762 = EDGE_CURVE('',#2558,#2754,#2763,.T.); +#2763 = LINE('',#2764,#2765); +#2764 = CARTESIAN_POINT('',(-1.6,0.8,1.56)); +#2765 = VECTOR('',#2766,1.); +#2766 = DIRECTION('',(1.,0.,0.)); +#2767 = CYLINDRICAL_SURFACE('',#2768,4.E-02); +#2768 = AXIS2_PLACEMENT_3D('',#2769,#2770,#2771); +#2769 = CARTESIAN_POINT('',(-1.6,0.76,1.56)); +#2770 = DIRECTION('',(1.,0.,0.)); +#2771 = DIRECTION('',(-0.,1.,0.)); +#2772 = ADVANCED_FACE('',(#2773),#2784,.T.); +#2773 = FACE_BOUND('',#2774,.T.); +#2774 = EDGE_LOOP('',(#2775,#2781,#2782,#2783)); +#2775 = ORIENTED_EDGE('',*,*,#2776,.F.); +#2776 = EDGE_CURVE('',#2727,#2754,#2777,.T.); +#2777 = LINE('',#2778,#2779); +#2778 = CARTESIAN_POINT('',(-1.2,0.8,0.)); +#2779 = VECTOR('',#2780,1.); +#2780 = DIRECTION('',(0.,0.,1.)); +#2781 = ORIENTED_EDGE('',*,*,#2726,.F.); +#2782 = ORIENTED_EDGE('',*,*,#2557,.T.); +#2783 = ORIENTED_EDGE('',*,*,#2762,.T.); +#2784 = PLANE('',#2785); +#2785 = AXIS2_PLACEMENT_3D('',#2786,#2787,#2788); +#2786 = CARTESIAN_POINT('',(-1.6,0.8,0.)); +#2787 = DIRECTION('',(0.,1.,0.)); +#2788 = DIRECTION('',(0.,-0.,1.)); +#2789 = ADVANCED_FACE('',(#2790,#2800),#2870,.T.); +#2790 = FACE_BOUND('',#2791,.T.); +#2791 = EDGE_LOOP('',(#2792,#2793,#2794,#2795,#2796,#2797,#2798,#2799)); +#2792 = ORIENTED_EDGE('',*,*,#2597,.F.); +#2793 = ORIENTED_EDGE('',*,*,#2637,.T.); +#2794 = ORIENTED_EDGE('',*,*,#2680,.T.); +#2795 = ORIENTED_EDGE('',*,*,#2734,.F.); +#2796 = ORIENTED_EDGE('',*,*,#2776,.T.); +#2797 = ORIENTED_EDGE('',*,*,#2753,.T.); +#2798 = ORIENTED_EDGE('',*,*,#2704,.F.); +#2799 = ORIENTED_EDGE('',*,*,#2654,.F.); +#2800 = FACE_BOUND('',#2801,.T.); +#2801 = EDGE_LOOP('',(#2802,#2813,#2821,#2830,#2838,#2847,#2855,#2864)); +#2802 = ORIENTED_EDGE('',*,*,#2803,.F.); +#2803 = EDGE_CURVE('',#2804,#2806,#2808,.T.); +#2804 = VERTEX_POINT('',#2805); +#2805 = CARTESIAN_POINT('',(-1.2,-0.76,8.E-02)); +#2806 = VERTEX_POINT('',#2807); +#2807 = CARTESIAN_POINT('',(-1.2,-0.72,4.E-02)); +#2808 = CIRCLE('',#2809,4.E-02); +#2809 = AXIS2_PLACEMENT_3D('',#2810,#2811,#2812); +#2810 = CARTESIAN_POINT('',(-1.2,-0.72,8.E-02)); +#2811 = DIRECTION('',(1.,0.,-0.)); +#2812 = DIRECTION('',(0.,0.,1.)); +#2813 = ORIENTED_EDGE('',*,*,#2814,.T.); +#2814 = EDGE_CURVE('',#2804,#2815,#2817,.T.); +#2815 = VERTEX_POINT('',#2816); +#2816 = CARTESIAN_POINT('',(-1.2,-0.76,1.52)); +#2817 = LINE('',#2818,#2819); +#2818 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#2819 = VECTOR('',#2820,1.); +#2820 = DIRECTION('',(0.,0.,1.)); +#2821 = ORIENTED_EDGE('',*,*,#2822,.T.); +#2822 = EDGE_CURVE('',#2815,#2823,#2825,.T.); +#2823 = VERTEX_POINT('',#2824); +#2824 = CARTESIAN_POINT('',(-1.2,-0.72,1.56)); +#2825 = CIRCLE('',#2826,4.E-02); +#2826 = AXIS2_PLACEMENT_3D('',#2827,#2828,#2829); +#2827 = CARTESIAN_POINT('',(-1.2,-0.72,1.52)); +#2828 = DIRECTION('',(-1.,0.,0.)); +#2829 = DIRECTION('',(0.,0.,1.)); +#2830 = ORIENTED_EDGE('',*,*,#2831,.T.); +#2831 = EDGE_CURVE('',#2823,#2832,#2834,.T.); +#2832 = VERTEX_POINT('',#2833); +#2833 = CARTESIAN_POINT('',(-1.2,0.72,1.56)); +#2834 = LINE('',#2835,#2836); +#2835 = CARTESIAN_POINT('',(-1.2,-0.76,1.56)); +#2836 = VECTOR('',#2837,1.); +#2837 = DIRECTION('',(0.,1.,0.)); +#2838 = ORIENTED_EDGE('',*,*,#2839,.F.); +#2839 = EDGE_CURVE('',#2840,#2832,#2842,.T.); +#2840 = VERTEX_POINT('',#2841); +#2841 = CARTESIAN_POINT('',(-1.2,0.76,1.52)); +#2842 = CIRCLE('',#2843,4.E-02); +#2843 = AXIS2_PLACEMENT_3D('',#2844,#2845,#2846); +#2844 = CARTESIAN_POINT('',(-1.2,0.72,1.52)); +#2845 = DIRECTION('',(1.,0.,-0.)); +#2846 = DIRECTION('',(0.,0.,1.)); +#2847 = ORIENTED_EDGE('',*,*,#2848,.F.); +#2848 = EDGE_CURVE('',#2849,#2840,#2851,.T.); +#2849 = VERTEX_POINT('',#2850); +#2850 = CARTESIAN_POINT('',(-1.2,0.76,8.E-02)); +#2851 = LINE('',#2852,#2853); +#2852 = CARTESIAN_POINT('',(-1.2,0.76,4.E-02)); +#2853 = VECTOR('',#2854,1.); +#2854 = DIRECTION('',(0.,0.,1.)); +#2855 = ORIENTED_EDGE('',*,*,#2856,.T.); +#2856 = EDGE_CURVE('',#2849,#2857,#2859,.T.); +#2857 = VERTEX_POINT('',#2858); +#2858 = CARTESIAN_POINT('',(-1.2,0.72,4.E-02)); +#2859 = CIRCLE('',#2860,4.E-02); +#2860 = AXIS2_PLACEMENT_3D('',#2861,#2862,#2863); +#2861 = CARTESIAN_POINT('',(-1.2,0.72,8.E-02)); +#2862 = DIRECTION('',(-1.,0.,0.)); +#2863 = DIRECTION('',(0.,0.,1.)); +#2864 = ORIENTED_EDGE('',*,*,#2865,.F.); +#2865 = EDGE_CURVE('',#2806,#2857,#2866,.T.); +#2866 = LINE('',#2867,#2868); +#2867 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#2868 = VECTOR('',#2869,1.); +#2869 = DIRECTION('',(0.,1.,0.)); +#2870 = PLANE('',#2871); +#2871 = AXIS2_PLACEMENT_3D('',#2872,#2873,#2874); +#2872 = CARTESIAN_POINT('',(-1.2,-0.8,0.)); +#2873 = DIRECTION('',(1.,0.,0.)); +#2874 = DIRECTION('',(0.,0.,1.)); +#2875 = ADVANCED_FACE('',(#2876),#2902,.T.); +#2876 = FACE_BOUND('',#2877,.T.); +#2877 = EDGE_LOOP('',(#2878,#2879,#2887,#2896)); +#2878 = ORIENTED_EDGE('',*,*,#2803,.T.); +#2879 = ORIENTED_EDGE('',*,*,#2880,.T.); +#2880 = EDGE_CURVE('',#2806,#2881,#2883,.T.); +#2881 = VERTEX_POINT('',#2882); +#2882 = CARTESIAN_POINT('',(1.2,-0.72,4.E-02)); +#2883 = LINE('',#2884,#2885); +#2884 = CARTESIAN_POINT('',(-1.2,-0.72,4.E-02)); +#2885 = VECTOR('',#2886,1.); +#2886 = DIRECTION('',(1.,0.,0.)); +#2887 = ORIENTED_EDGE('',*,*,#2888,.F.); +#2888 = EDGE_CURVE('',#2889,#2881,#2891,.T.); +#2889 = VERTEX_POINT('',#2890); +#2890 = CARTESIAN_POINT('',(1.2,-0.76,8.E-02)); +#2891 = CIRCLE('',#2892,4.E-02); +#2892 = AXIS2_PLACEMENT_3D('',#2893,#2894,#2895); +#2893 = CARTESIAN_POINT('',(1.2,-0.72,8.E-02)); +#2894 = DIRECTION('',(1.,0.,-0.)); +#2895 = DIRECTION('',(0.,0.,1.)); +#2896 = ORIENTED_EDGE('',*,*,#2897,.F.); +#2897 = EDGE_CURVE('',#2804,#2889,#2898,.T.); +#2898 = LINE('',#2899,#2900); +#2899 = CARTESIAN_POINT('',(-1.2,-0.76,8.E-02)); +#2900 = VECTOR('',#2901,1.); +#2901 = DIRECTION('',(1.,0.,0.)); +#2902 = CYLINDRICAL_SURFACE('',#2903,4.E-02); +#2903 = AXIS2_PLACEMENT_3D('',#2904,#2905,#2906); +#2904 = CARTESIAN_POINT('',(-1.2,-0.72,8.E-02)); +#2905 = DIRECTION('',(1.,0.,0.)); +#2906 = DIRECTION('',(0.,-1.,0.)); +#2907 = ADVANCED_FACE('',(#2908),#2926,.F.); +#2908 = FACE_BOUND('',#2909,.F.); +#2909 = EDGE_LOOP('',(#2910,#2911,#2912,#2920)); +#2910 = ORIENTED_EDGE('',*,*,#2865,.F.); +#2911 = ORIENTED_EDGE('',*,*,#2880,.T.); +#2912 = ORIENTED_EDGE('',*,*,#2913,.T.); +#2913 = EDGE_CURVE('',#2881,#2914,#2916,.T.); +#2914 = VERTEX_POINT('',#2915); +#2915 = CARTESIAN_POINT('',(1.2,0.72,4.E-02)); +#2916 = LINE('',#2917,#2918); +#2917 = CARTESIAN_POINT('',(1.2,-0.76,4.E-02)); +#2918 = VECTOR('',#2919,1.); +#2919 = DIRECTION('',(0.,1.,0.)); +#2920 = ORIENTED_EDGE('',*,*,#2921,.F.); +#2921 = EDGE_CURVE('',#2857,#2914,#2922,.T.); +#2922 = LINE('',#2923,#2924); +#2923 = CARTESIAN_POINT('',(-1.2,0.72,4.E-02)); +#2924 = VECTOR('',#2925,1.); +#2925 = DIRECTION('',(1.,0.,0.)); +#2926 = PLANE('',#2927); +#2927 = AXIS2_PLACEMENT_3D('',#2928,#2929,#2930); +#2928 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#2929 = DIRECTION('',(0.,0.,1.)); +#2930 = DIRECTION('',(1.,0.,-0.)); +#2931 = ADVANCED_FACE('',(#2932),#2951,.T.); +#2932 = FACE_BOUND('',#2933,.T.); +#2933 = EDGE_LOOP('',(#2934,#2942,#2949,#2950)); +#2934 = ORIENTED_EDGE('',*,*,#2935,.T.); +#2935 = EDGE_CURVE('',#2849,#2936,#2938,.T.); +#2936 = VERTEX_POINT('',#2937); +#2937 = CARTESIAN_POINT('',(1.2,0.76,8.E-02)); +#2938 = LINE('',#2939,#2940); +#2939 = CARTESIAN_POINT('',(-1.2,0.76,8.E-02)); +#2940 = VECTOR('',#2941,1.); +#2941 = DIRECTION('',(1.,0.,0.)); +#2942 = ORIENTED_EDGE('',*,*,#2943,.T.); +#2943 = EDGE_CURVE('',#2936,#2914,#2944,.T.); +#2944 = CIRCLE('',#2945,4.E-02); +#2945 = AXIS2_PLACEMENT_3D('',#2946,#2947,#2948); +#2946 = CARTESIAN_POINT('',(1.2,0.72,8.E-02)); +#2947 = DIRECTION('',(-1.,0.,0.)); +#2948 = DIRECTION('',(0.,0.,1.)); +#2949 = ORIENTED_EDGE('',*,*,#2921,.F.); +#2950 = ORIENTED_EDGE('',*,*,#2856,.F.); +#2951 = CYLINDRICAL_SURFACE('',#2952,4.E-02); +#2952 = AXIS2_PLACEMENT_3D('',#2953,#2954,#2955); +#2953 = CARTESIAN_POINT('',(-1.2,0.72,8.E-02)); +#2954 = DIRECTION('',(1.,0.,0.)); +#2955 = DIRECTION('',(-0.,1.,0.)); +#2956 = ADVANCED_FACE('',(#2957),#2975,.T.); +#2957 = FACE_BOUND('',#2958,.T.); +#2958 = EDGE_LOOP('',(#2959,#2967,#2968,#2969)); +#2959 = ORIENTED_EDGE('',*,*,#2960,.F.); +#2960 = EDGE_CURVE('',#2936,#2961,#2963,.T.); +#2961 = VERTEX_POINT('',#2962); +#2962 = CARTESIAN_POINT('',(1.2,0.76,1.52)); +#2963 = LINE('',#2964,#2965); +#2964 = CARTESIAN_POINT('',(1.2,0.76,4.E-02)); +#2965 = VECTOR('',#2966,1.); +#2966 = DIRECTION('',(0.,0.,1.)); +#2967 = ORIENTED_EDGE('',*,*,#2935,.F.); +#2968 = ORIENTED_EDGE('',*,*,#2848,.T.); +#2969 = ORIENTED_EDGE('',*,*,#2970,.T.); +#2970 = EDGE_CURVE('',#2840,#2961,#2971,.T.); +#2971 = LINE('',#2972,#2973); +#2972 = CARTESIAN_POINT('',(-1.2,0.76,1.52)); +#2973 = VECTOR('',#2974,1.); +#2974 = DIRECTION('',(1.,0.,0.)); +#2975 = PLANE('',#2976); +#2976 = AXIS2_PLACEMENT_3D('',#2977,#2978,#2979); +#2977 = CARTESIAN_POINT('',(-1.2,0.76,4.E-02)); +#2978 = DIRECTION('',(0.,1.,0.)); +#2979 = DIRECTION('',(0.,-0.,1.)); +#2980 = ADVANCED_FACE('',(#2981),#3000,.T.); +#2981 = FACE_BOUND('',#2982,.T.); +#2982 = EDGE_LOOP('',(#2983,#2984,#2992,#2999)); +#2983 = ORIENTED_EDGE('',*,*,#2839,.T.); +#2984 = ORIENTED_EDGE('',*,*,#2985,.T.); +#2985 = EDGE_CURVE('',#2832,#2986,#2988,.T.); +#2986 = VERTEX_POINT('',#2987); +#2987 = CARTESIAN_POINT('',(1.2,0.72,1.56)); +#2988 = LINE('',#2989,#2990); +#2989 = CARTESIAN_POINT('',(-1.2,0.72,1.56)); +#2990 = VECTOR('',#2991,1.); +#2991 = DIRECTION('',(1.,0.,0.)); +#2992 = ORIENTED_EDGE('',*,*,#2993,.F.); +#2993 = EDGE_CURVE('',#2961,#2986,#2994,.T.); +#2994 = CIRCLE('',#2995,4.E-02); +#2995 = AXIS2_PLACEMENT_3D('',#2996,#2997,#2998); +#2996 = CARTESIAN_POINT('',(1.2,0.72,1.52)); +#2997 = DIRECTION('',(1.,0.,-0.)); +#2998 = DIRECTION('',(0.,0.,1.)); +#2999 = ORIENTED_EDGE('',*,*,#2970,.F.); +#3000 = CYLINDRICAL_SURFACE('',#3001,4.E-02); +#3001 = AXIS2_PLACEMENT_3D('',#3002,#3003,#3004); +#3002 = CARTESIAN_POINT('',(-1.2,0.72,1.52)); +#3003 = DIRECTION('',(1.,0.,0.)); +#3004 = DIRECTION('',(-0.,1.,0.)); +#3005 = ADVANCED_FACE('',(#3006),#3024,.T.); +#3006 = FACE_BOUND('',#3007,.T.); +#3007 = EDGE_LOOP('',(#3008,#3009,#3017,#3023)); +#3008 = ORIENTED_EDGE('',*,*,#2831,.F.); +#3009 = ORIENTED_EDGE('',*,*,#3010,.T.); +#3010 = EDGE_CURVE('',#2823,#3011,#3013,.T.); +#3011 = VERTEX_POINT('',#3012); +#3012 = CARTESIAN_POINT('',(1.2,-0.72,1.56)); +#3013 = LINE('',#3014,#3015); +#3014 = CARTESIAN_POINT('',(-1.2,-0.72,1.56)); +#3015 = VECTOR('',#3016,1.); +#3016 = DIRECTION('',(1.,0.,0.)); +#3017 = ORIENTED_EDGE('',*,*,#3018,.T.); +#3018 = EDGE_CURVE('',#3011,#2986,#3019,.T.); +#3019 = LINE('',#3020,#3021); +#3020 = CARTESIAN_POINT('',(1.2,-0.76,1.56)); +#3021 = VECTOR('',#3022,1.); +#3022 = DIRECTION('',(0.,1.,0.)); +#3023 = ORIENTED_EDGE('',*,*,#2985,.F.); +#3024 = PLANE('',#3025); +#3025 = AXIS2_PLACEMENT_3D('',#3026,#3027,#3028); +#3026 = CARTESIAN_POINT('',(-1.2,-0.76,1.56)); +#3027 = DIRECTION('',(0.,0.,1.)); +#3028 = DIRECTION('',(1.,0.,-0.)); +#3029 = ADVANCED_FACE('',(#3030),#3049,.T.); +#3030 = FACE_BOUND('',#3031,.T.); +#3031 = EDGE_LOOP('',(#3032,#3040,#3047,#3048)); +#3032 = ORIENTED_EDGE('',*,*,#3033,.T.); +#3033 = EDGE_CURVE('',#2815,#3034,#3036,.T.); +#3034 = VERTEX_POINT('',#3035); +#3035 = CARTESIAN_POINT('',(1.2,-0.76,1.52)); +#3036 = LINE('',#3037,#3038); +#3037 = CARTESIAN_POINT('',(-1.2,-0.76,1.52)); +#3038 = VECTOR('',#3039,1.); +#3039 = DIRECTION('',(1.,0.,0.)); +#3040 = ORIENTED_EDGE('',*,*,#3041,.T.); +#3041 = EDGE_CURVE('',#3034,#3011,#3042,.T.); +#3042 = CIRCLE('',#3043,4.E-02); +#3043 = AXIS2_PLACEMENT_3D('',#3044,#3045,#3046); +#3044 = CARTESIAN_POINT('',(1.2,-0.72,1.52)); +#3045 = DIRECTION('',(-1.,0.,0.)); +#3046 = DIRECTION('',(0.,0.,1.)); +#3047 = ORIENTED_EDGE('',*,*,#3010,.F.); +#3048 = ORIENTED_EDGE('',*,*,#2822,.F.); +#3049 = CYLINDRICAL_SURFACE('',#3050,4.E-02); +#3050 = AXIS2_PLACEMENT_3D('',#3051,#3052,#3053); +#3051 = CARTESIAN_POINT('',(-1.2,-0.72,1.52)); +#3052 = DIRECTION('',(1.,0.,0.)); +#3053 = DIRECTION('',(0.,-1.,0.)); +#3054 = ADVANCED_FACE('',(#3055),#3066,.F.); +#3055 = FACE_BOUND('',#3056,.F.); +#3056 = EDGE_LOOP('',(#3057,#3063,#3064,#3065)); +#3057 = ORIENTED_EDGE('',*,*,#3058,.F.); +#3058 = EDGE_CURVE('',#2889,#3034,#3059,.T.); +#3059 = LINE('',#3060,#3061); +#3060 = CARTESIAN_POINT('',(1.2,-0.76,4.E-02)); +#3061 = VECTOR('',#3062,1.); +#3062 = DIRECTION('',(0.,0.,1.)); +#3063 = ORIENTED_EDGE('',*,*,#2897,.F.); +#3064 = ORIENTED_EDGE('',*,*,#2814,.T.); +#3065 = ORIENTED_EDGE('',*,*,#3033,.T.); +#3066 = PLANE('',#3067); +#3067 = AXIS2_PLACEMENT_3D('',#3068,#3069,#3070); +#3068 = CARTESIAN_POINT('',(-1.2,-0.76,4.E-02)); +#3069 = DIRECTION('',(0.,1.,0.)); +#3070 = DIRECTION('',(0.,-0.,1.)); +#3071 = ADVANCED_FACE('',(#3072,#3142),#3152,.F.); +#3072 = FACE_BOUND('',#3073,.F.); +#3073 = EDGE_LOOP('',(#3074,#3084,#3093,#3101,#3110,#3118,#3127,#3135)); +#3074 = ORIENTED_EDGE('',*,*,#3075,.F.); +#3075 = EDGE_CURVE('',#3076,#3078,#3080,.T.); +#3076 = VERTEX_POINT('',#3077); +#3077 = CARTESIAN_POINT('',(1.2,-0.8,4.E-02)); +#3078 = VERTEX_POINT('',#3079); +#3079 = CARTESIAN_POINT('',(1.2,-0.8,1.56)); +#3080 = LINE('',#3081,#3082); +#3081 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3082 = VECTOR('',#3083,1.); +#3083 = DIRECTION('',(0.,0.,1.)); +#3084 = ORIENTED_EDGE('',*,*,#3085,.T.); +#3085 = EDGE_CURVE('',#3076,#3086,#3088,.T.); +#3086 = VERTEX_POINT('',#3087); +#3087 = CARTESIAN_POINT('',(1.2,-0.76,0.)); +#3088 = CIRCLE('',#3089,4.E-02); +#3089 = AXIS2_PLACEMENT_3D('',#3090,#3091,#3092); +#3090 = CARTESIAN_POINT('',(1.2,-0.76,4.E-02)); +#3091 = DIRECTION('',(1.,0.,-0.)); +#3092 = DIRECTION('',(0.,0.,1.)); +#3093 = ORIENTED_EDGE('',*,*,#3094,.T.); +#3094 = EDGE_CURVE('',#3086,#3095,#3097,.T.); +#3095 = VERTEX_POINT('',#3096); +#3096 = CARTESIAN_POINT('',(1.2,0.76,0.)); +#3097 = LINE('',#3098,#3099); +#3098 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3099 = VECTOR('',#3100,1.); +#3100 = DIRECTION('',(0.,1.,0.)); +#3101 = ORIENTED_EDGE('',*,*,#3102,.F.); +#3102 = EDGE_CURVE('',#3103,#3095,#3105,.T.); +#3103 = VERTEX_POINT('',#3104); +#3104 = CARTESIAN_POINT('',(1.2,0.8,4.E-02)); +#3105 = CIRCLE('',#3106,4.E-02); +#3106 = AXIS2_PLACEMENT_3D('',#3107,#3108,#3109); +#3107 = CARTESIAN_POINT('',(1.2,0.76,4.E-02)); +#3108 = DIRECTION('',(-1.,0.,0.)); +#3109 = DIRECTION('',(0.,0.,1.)); +#3110 = ORIENTED_EDGE('',*,*,#3111,.T.); +#3111 = EDGE_CURVE('',#3103,#3112,#3114,.T.); +#3112 = VERTEX_POINT('',#3113); +#3113 = CARTESIAN_POINT('',(1.2,0.8,1.56)); +#3114 = LINE('',#3115,#3116); +#3115 = CARTESIAN_POINT('',(1.2,0.8,0.)); +#3116 = VECTOR('',#3117,1.); +#3117 = DIRECTION('',(0.,0.,1.)); +#3118 = ORIENTED_EDGE('',*,*,#3119,.T.); +#3119 = EDGE_CURVE('',#3112,#3120,#3122,.T.); +#3120 = VERTEX_POINT('',#3121); +#3121 = CARTESIAN_POINT('',(1.2,0.76,1.6)); +#3122 = CIRCLE('',#3123,4.E-02); +#3123 = AXIS2_PLACEMENT_3D('',#3124,#3125,#3126); +#3124 = CARTESIAN_POINT('',(1.2,0.76,1.56)); +#3125 = DIRECTION('',(1.,0.,-0.)); +#3126 = DIRECTION('',(0.,0.,1.)); +#3127 = ORIENTED_EDGE('',*,*,#3128,.F.); +#3128 = EDGE_CURVE('',#3129,#3120,#3131,.T.); +#3129 = VERTEX_POINT('',#3130); +#3130 = CARTESIAN_POINT('',(1.2,-0.76,1.6)); +#3131 = LINE('',#3132,#3133); +#3132 = CARTESIAN_POINT('',(1.2,-0.8,1.6)); +#3133 = VECTOR('',#3134,1.); +#3134 = DIRECTION('',(0.,1.,0.)); +#3135 = ORIENTED_EDGE('',*,*,#3136,.F.); +#3136 = EDGE_CURVE('',#3078,#3129,#3137,.T.); +#3137 = CIRCLE('',#3138,4.E-02); +#3138 = AXIS2_PLACEMENT_3D('',#3139,#3140,#3141); +#3139 = CARTESIAN_POINT('',(1.2,-0.76,1.56)); +#3140 = DIRECTION('',(-1.,0.,0.)); +#3141 = DIRECTION('',(0.,0.,1.)); +#3142 = FACE_BOUND('',#3143,.F.); +#3143 = EDGE_LOOP('',(#3144,#3145,#3146,#3147,#3148,#3149,#3150,#3151)); +#3144 = ORIENTED_EDGE('',*,*,#2888,.F.); +#3145 = ORIENTED_EDGE('',*,*,#3058,.T.); +#3146 = ORIENTED_EDGE('',*,*,#3041,.T.); +#3147 = ORIENTED_EDGE('',*,*,#3018,.T.); +#3148 = ORIENTED_EDGE('',*,*,#2993,.F.); +#3149 = ORIENTED_EDGE('',*,*,#2960,.F.); +#3150 = ORIENTED_EDGE('',*,*,#2943,.T.); +#3151 = ORIENTED_EDGE('',*,*,#2913,.F.); +#3152 = PLANE('',#3153); +#3153 = AXIS2_PLACEMENT_3D('',#3154,#3155,#3156); +#3154 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3155 = DIRECTION('',(1.,0.,0.)); +#3156 = DIRECTION('',(0.,0.,1.)); +#3157 = ADVANCED_FACE('',(#3158),#3183,.F.); +#3158 = FACE_BOUND('',#3159,.F.); +#3159 = EDGE_LOOP('',(#3160,#3170,#3176,#3177)); +#3160 = ORIENTED_EDGE('',*,*,#3161,.F.); +#3161 = EDGE_CURVE('',#3162,#3164,#3166,.T.); +#3162 = VERTEX_POINT('',#3163); +#3163 = CARTESIAN_POINT('',(1.6,-0.8,4.E-02)); +#3164 = VERTEX_POINT('',#3165); +#3165 = CARTESIAN_POINT('',(1.6,-0.8,1.56)); +#3166 = LINE('',#3167,#3168); +#3167 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#3168 = VECTOR('',#3169,1.); +#3169 = DIRECTION('',(0.,0.,1.)); +#3170 = ORIENTED_EDGE('',*,*,#3171,.F.); +#3171 = EDGE_CURVE('',#3076,#3162,#3172,.T.); +#3172 = LINE('',#3173,#3174); +#3173 = CARTESIAN_POINT('',(1.2,-0.8,4.E-02)); +#3174 = VECTOR('',#3175,1.); +#3175 = DIRECTION('',(1.,0.,0.)); +#3176 = ORIENTED_EDGE('',*,*,#3075,.T.); +#3177 = ORIENTED_EDGE('',*,*,#3178,.T.); +#3178 = EDGE_CURVE('',#3078,#3164,#3179,.T.); +#3179 = LINE('',#3180,#3181); +#3180 = CARTESIAN_POINT('',(1.2,-0.8,1.56)); +#3181 = VECTOR('',#3182,1.); +#3182 = DIRECTION('',(1.,0.,0.)); +#3183 = PLANE('',#3184); +#3184 = AXIS2_PLACEMENT_3D('',#3185,#3186,#3187); +#3185 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3186 = DIRECTION('',(0.,1.,0.)); +#3187 = DIRECTION('',(0.,-0.,1.)); +#3188 = ADVANCED_FACE('',(#3189),#3208,.T.); +#3189 = FACE_BOUND('',#3190,.T.); +#3190 = EDGE_LOOP('',(#3191,#3192,#3200,#3207)); +#3191 = ORIENTED_EDGE('',*,*,#3085,.T.); +#3192 = ORIENTED_EDGE('',*,*,#3193,.T.); +#3193 = EDGE_CURVE('',#3086,#3194,#3196,.T.); +#3194 = VERTEX_POINT('',#3195); +#3195 = CARTESIAN_POINT('',(1.6,-0.76,0.)); +#3196 = LINE('',#3197,#3198); +#3197 = CARTESIAN_POINT('',(1.2,-0.76,0.)); +#3198 = VECTOR('',#3199,1.); +#3199 = DIRECTION('',(1.,0.,0.)); +#3200 = ORIENTED_EDGE('',*,*,#3201,.F.); +#3201 = EDGE_CURVE('',#3162,#3194,#3202,.T.); +#3202 = CIRCLE('',#3203,4.E-02); +#3203 = AXIS2_PLACEMENT_3D('',#3204,#3205,#3206); +#3204 = CARTESIAN_POINT('',(1.6,-0.76,4.E-02)); +#3205 = DIRECTION('',(1.,0.,-0.)); +#3206 = DIRECTION('',(0.,0.,1.)); +#3207 = ORIENTED_EDGE('',*,*,#3171,.F.); +#3208 = CYLINDRICAL_SURFACE('',#3209,4.E-02); +#3209 = AXIS2_PLACEMENT_3D('',#3210,#3211,#3212); +#3210 = CARTESIAN_POINT('',(1.2,-0.76,4.E-02)); +#3211 = DIRECTION('',(1.,0.,0.)); +#3212 = DIRECTION('',(0.,-1.,0.)); +#3213 = ADVANCED_FACE('',(#3214),#3233,.T.); +#3214 = FACE_BOUND('',#3215,.T.); +#3215 = EDGE_LOOP('',(#3216,#3217,#3226,#3232)); +#3216 = ORIENTED_EDGE('',*,*,#3178,.T.); +#3217 = ORIENTED_EDGE('',*,*,#3218,.T.); +#3218 = EDGE_CURVE('',#3164,#3219,#3221,.T.); +#3219 = VERTEX_POINT('',#3220); +#3220 = CARTESIAN_POINT('',(1.6,-0.76,1.6)); +#3221 = CIRCLE('',#3222,4.E-02); +#3222 = AXIS2_PLACEMENT_3D('',#3223,#3224,#3225); +#3223 = CARTESIAN_POINT('',(1.6,-0.76,1.56)); +#3224 = DIRECTION('',(-1.,0.,0.)); +#3225 = DIRECTION('',(0.,0.,1.)); +#3226 = ORIENTED_EDGE('',*,*,#3227,.F.); +#3227 = EDGE_CURVE('',#3129,#3219,#3228,.T.); +#3228 = LINE('',#3229,#3230); +#3229 = CARTESIAN_POINT('',(1.2,-0.76,1.6)); +#3230 = VECTOR('',#3231,1.); +#3231 = DIRECTION('',(1.,0.,0.)); +#3232 = ORIENTED_EDGE('',*,*,#3136,.F.); +#3233 = CYLINDRICAL_SURFACE('',#3234,4.E-02); +#3234 = AXIS2_PLACEMENT_3D('',#3235,#3236,#3237); +#3235 = CARTESIAN_POINT('',(1.2,-0.76,1.56)); +#3236 = DIRECTION('',(1.,0.,0.)); +#3237 = DIRECTION('',(0.,-1.,0.)); +#3238 = ADVANCED_FACE('',(#3239),#3257,.F.); +#3239 = FACE_BOUND('',#3240,.F.); +#3240 = EDGE_LOOP('',(#3241,#3242,#3243,#3251)); +#3241 = ORIENTED_EDGE('',*,*,#3094,.F.); +#3242 = ORIENTED_EDGE('',*,*,#3193,.T.); +#3243 = ORIENTED_EDGE('',*,*,#3244,.T.); +#3244 = EDGE_CURVE('',#3194,#3245,#3247,.T.); +#3245 = VERTEX_POINT('',#3246); +#3246 = CARTESIAN_POINT('',(1.6,0.76,0.)); +#3247 = LINE('',#3248,#3249); +#3248 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#3249 = VECTOR('',#3250,1.); +#3250 = DIRECTION('',(0.,1.,0.)); +#3251 = ORIENTED_EDGE('',*,*,#3252,.F.); +#3252 = EDGE_CURVE('',#3095,#3245,#3253,.T.); +#3253 = LINE('',#3254,#3255); +#3254 = CARTESIAN_POINT('',(1.2,0.76,0.)); +#3255 = VECTOR('',#3256,1.); +#3256 = DIRECTION('',(1.,0.,0.)); +#3257 = PLANE('',#3258); +#3258 = AXIS2_PLACEMENT_3D('',#3259,#3260,#3261); +#3259 = CARTESIAN_POINT('',(1.2,-0.8,0.)); +#3260 = DIRECTION('',(0.,0.,1.)); +#3261 = DIRECTION('',(1.,0.,-0.)); +#3262 = ADVANCED_FACE('',(#3263),#3281,.T.); +#3263 = FACE_BOUND('',#3264,.T.); +#3264 = EDGE_LOOP('',(#3265,#3266,#3267,#3275)); +#3265 = ORIENTED_EDGE('',*,*,#3128,.F.); +#3266 = ORIENTED_EDGE('',*,*,#3227,.T.); +#3267 = ORIENTED_EDGE('',*,*,#3268,.T.); +#3268 = EDGE_CURVE('',#3219,#3269,#3271,.T.); +#3269 = VERTEX_POINT('',#3270); +#3270 = CARTESIAN_POINT('',(1.6,0.76,1.6)); +#3271 = LINE('',#3272,#3273); +#3272 = CARTESIAN_POINT('',(1.6,-0.8,1.6)); +#3273 = VECTOR('',#3274,1.); +#3274 = DIRECTION('',(0.,1.,0.)); +#3275 = ORIENTED_EDGE('',*,*,#3276,.F.); +#3276 = EDGE_CURVE('',#3120,#3269,#3277,.T.); +#3277 = LINE('',#3278,#3279); +#3278 = CARTESIAN_POINT('',(1.2,0.76,1.6)); +#3279 = VECTOR('',#3280,1.); +#3280 = DIRECTION('',(1.,0.,0.)); +#3281 = PLANE('',#3282); +#3282 = AXIS2_PLACEMENT_3D('',#3283,#3284,#3285); +#3283 = CARTESIAN_POINT('',(1.2,-0.8,1.6)); +#3284 = DIRECTION('',(0.,0.,1.)); +#3285 = DIRECTION('',(1.,0.,-0.)); +#3286 = ADVANCED_FACE('',(#3287),#3306,.T.); +#3287 = FACE_BOUND('',#3288,.T.); +#3288 = EDGE_LOOP('',(#3289,#3297,#3304,#3305)); +#3289 = ORIENTED_EDGE('',*,*,#3290,.T.); +#3290 = EDGE_CURVE('',#3103,#3291,#3293,.T.); +#3291 = VERTEX_POINT('',#3292); +#3292 = CARTESIAN_POINT('',(1.6,0.8,4.E-02)); +#3293 = LINE('',#3294,#3295); +#3294 = CARTESIAN_POINT('',(1.2,0.8,4.E-02)); +#3295 = VECTOR('',#3296,1.); +#3296 = DIRECTION('',(1.,0.,0.)); +#3297 = ORIENTED_EDGE('',*,*,#3298,.T.); +#3298 = EDGE_CURVE('',#3291,#3245,#3299,.T.); +#3299 = CIRCLE('',#3300,4.E-02); +#3300 = AXIS2_PLACEMENT_3D('',#3301,#3302,#3303); +#3301 = CARTESIAN_POINT('',(1.6,0.76,4.E-02)); +#3302 = DIRECTION('',(-1.,0.,0.)); +#3303 = DIRECTION('',(0.,0.,1.)); +#3304 = ORIENTED_EDGE('',*,*,#3252,.F.); +#3305 = ORIENTED_EDGE('',*,*,#3102,.F.); +#3306 = CYLINDRICAL_SURFACE('',#3307,4.E-02); +#3307 = AXIS2_PLACEMENT_3D('',#3308,#3309,#3310); +#3308 = CARTESIAN_POINT('',(1.2,0.76,4.E-02)); +#3309 = DIRECTION('',(1.,0.,0.)); +#3310 = DIRECTION('',(-0.,1.,0.)); +#3311 = ADVANCED_FACE('',(#3312),#3331,.T.); +#3312 = FACE_BOUND('',#3313,.T.); +#3313 = EDGE_LOOP('',(#3314,#3315,#3316,#3325)); +#3314 = ORIENTED_EDGE('',*,*,#3119,.T.); +#3315 = ORIENTED_EDGE('',*,*,#3276,.T.); +#3316 = ORIENTED_EDGE('',*,*,#3317,.F.); +#3317 = EDGE_CURVE('',#3318,#3269,#3320,.T.); +#3318 = VERTEX_POINT('',#3319); +#3319 = CARTESIAN_POINT('',(1.6,0.8,1.56)); +#3320 = CIRCLE('',#3321,4.E-02); +#3321 = AXIS2_PLACEMENT_3D('',#3322,#3323,#3324); +#3322 = CARTESIAN_POINT('',(1.6,0.76,1.56)); +#3323 = DIRECTION('',(1.,0.,-0.)); +#3324 = DIRECTION('',(0.,0.,1.)); +#3325 = ORIENTED_EDGE('',*,*,#3326,.F.); +#3326 = EDGE_CURVE('',#3112,#3318,#3327,.T.); +#3327 = LINE('',#3328,#3329); +#3328 = CARTESIAN_POINT('',(1.2,0.8,1.56)); +#3329 = VECTOR('',#3330,1.); +#3330 = DIRECTION('',(1.,0.,0.)); +#3331 = CYLINDRICAL_SURFACE('',#3332,4.E-02); +#3332 = AXIS2_PLACEMENT_3D('',#3333,#3334,#3335); +#3333 = CARTESIAN_POINT('',(1.2,0.76,1.56)); +#3334 = DIRECTION('',(1.,0.,0.)); +#3335 = DIRECTION('',(-0.,1.,0.)); +#3336 = ADVANCED_FACE('',(#3337),#3348,.T.); +#3337 = FACE_BOUND('',#3338,.T.); +#3338 = EDGE_LOOP('',(#3339,#3345,#3346,#3347)); +#3339 = ORIENTED_EDGE('',*,*,#3340,.F.); +#3340 = EDGE_CURVE('',#3291,#3318,#3341,.T.); +#3341 = LINE('',#3342,#3343); +#3342 = CARTESIAN_POINT('',(1.6,0.8,0.)); +#3343 = VECTOR('',#3344,1.); +#3344 = DIRECTION('',(0.,0.,1.)); +#3345 = ORIENTED_EDGE('',*,*,#3290,.F.); +#3346 = ORIENTED_EDGE('',*,*,#3111,.T.); +#3347 = ORIENTED_EDGE('',*,*,#3326,.T.); +#3348 = PLANE('',#3349); +#3349 = AXIS2_PLACEMENT_3D('',#3350,#3351,#3352); +#3350 = CARTESIAN_POINT('',(1.2,0.8,0.)); +#3351 = DIRECTION('',(0.,1.,0.)); +#3352 = DIRECTION('',(0.,-0.,1.)); +#3353 = ADVANCED_FACE('',(#3354),#3364,.T.); +#3354 = FACE_BOUND('',#3355,.T.); +#3355 = EDGE_LOOP('',(#3356,#3357,#3358,#3359,#3360,#3361,#3362,#3363)); +#3356 = ORIENTED_EDGE('',*,*,#3161,.F.); +#3357 = ORIENTED_EDGE('',*,*,#3201,.T.); +#3358 = ORIENTED_EDGE('',*,*,#3244,.T.); +#3359 = ORIENTED_EDGE('',*,*,#3298,.F.); +#3360 = ORIENTED_EDGE('',*,*,#3340,.T.); +#3361 = ORIENTED_EDGE('',*,*,#3317,.T.); +#3362 = ORIENTED_EDGE('',*,*,#3268,.F.); +#3363 = ORIENTED_EDGE('',*,*,#3218,.F.); +#3364 = PLANE('',#3365); +#3365 = AXIS2_PLACEMENT_3D('',#3366,#3367,#3368); +#3366 = CARTESIAN_POINT('',(1.6,-0.8,0.)); +#3367 = DIRECTION('',(1.,0.,0.)); +#3368 = DIRECTION('',(0.,0.,1.)); +#3369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3373)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#3370,#3371,#3372)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#3370 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#3371 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#3372 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#3373 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#3370, + 'distance_accuracy_value','confusion accuracy'); +#3374 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3375,#3377); +#3375 = ( REPRESENTATION_RELATIONSHIP('','',#2514,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3376) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#3376 = ITEM_DEFINED_TRANSFORMATION('','',#11,#35); +#3377 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #3378); +#3378 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('6','C16','',#5,#2509,$); +#3379 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#2511)); +#3380 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3381,#3383); +#3381 = ( REPRESENTATION_RELATIONSHIP('','',#2514,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3382) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#3382 = ITEM_DEFINED_TRANSFORMATION('','',#11,#39); +#3383 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #3384); +#3384 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7','C17','',#5,#2509,$); +#3385 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3386,#3388); +#3386 = ( REPRESENTATION_RELATIONSHIP('','',#244,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3387) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#3387 = ITEM_DEFINED_TRANSFORMATION('','',#11,#43); +#3388 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #3389); +#3389 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('8','C2','',#5,#239,$); +#3390 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3391,#3393); +#3391 = ( REPRESENTATION_RELATIONSHIP('','',#2514,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3392) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#3392 = ITEM_DEFINED_TRANSFORMATION('','',#11,#47); +#3393 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #3394); +#3394 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('9','C3','',#5,#2509,$); +#3395 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3396,#3398); +#3396 = ( REPRESENTATION_RELATIONSHIP('','',#2514,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3397) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#3397 = ITEM_DEFINED_TRANSFORMATION('','',#11,#51); +#3398 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #3399); +#3399 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','C4','',#5,#2509,$); +#3400 = SHAPE_DEFINITION_REPRESENTATION(#3401,#3407); +#3401 = PRODUCT_DEFINITION_SHAPE('','',#3402); +#3402 = PRODUCT_DEFINITION('design','',#3403,#3406); +#3403 = PRODUCT_DEFINITION_FORMATION('','',#3404); +#3404 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#3405)); +#3405 = PRODUCT_CONTEXT('',#2,'mechanical'); +#3406 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#3407 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#3408),#4262); +#3408 = MANIFOLD_SOLID_BREP('',#3409); +#3409 = CLOSED_SHELL('',(#3410,#3486,#3517,#3542,#3567,#3591,#3615,#3640 + ,#3665,#3682,#3768,#3800,#3824,#3849,#3873,#3898,#3922,#3947,#3964, + #4050,#4081,#4106,#4131,#4155,#4179,#4204,#4229,#4246)); +#3410 = ADVANCED_FACE('',(#3411),#3481,.F.); +#3411 = FACE_BOUND('',#3412,.F.); +#3412 = EDGE_LOOP('',(#3413,#3423,#3432,#3440,#3449,#3457,#3466,#3474)); +#3413 = ORIENTED_EDGE('',*,*,#3414,.F.); +#3414 = EDGE_CURVE('',#3415,#3417,#3419,.T.); +#3415 = VERTEX_POINT('',#3416); +#3416 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#3417 = VERTEX_POINT('',#3418); +#3418 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#3419 = LINE('',#3420,#3421); +#3420 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3421 = VECTOR('',#3422,1.); +#3422 = DIRECTION('',(0.,0.,1.)); +#3423 = ORIENTED_EDGE('',*,*,#3424,.T.); +#3424 = EDGE_CURVE('',#3415,#3425,#3427,.T.); +#3425 = VERTEX_POINT('',#3426); +#3426 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#3427 = CIRCLE('',#3428,4.E-02); +#3428 = AXIS2_PLACEMENT_3D('',#3429,#3430,#3431); +#3429 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#3430 = DIRECTION('',(1.,0.,-0.)); +#3431 = DIRECTION('',(0.,0.,1.)); +#3432 = ORIENTED_EDGE('',*,*,#3433,.T.); +#3433 = EDGE_CURVE('',#3425,#3434,#3436,.T.); +#3434 = VERTEX_POINT('',#3435); +#3435 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#3436 = LINE('',#3437,#3438); +#3437 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3438 = VECTOR('',#3439,1.); +#3439 = DIRECTION('',(0.,1.,0.)); +#3440 = ORIENTED_EDGE('',*,*,#3441,.F.); +#3441 = EDGE_CURVE('',#3442,#3434,#3444,.T.); +#3442 = VERTEX_POINT('',#3443); +#3443 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#3444 = CIRCLE('',#3445,4.E-02); +#3445 = AXIS2_PLACEMENT_3D('',#3446,#3447,#3448); +#3446 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#3447 = DIRECTION('',(-1.,0.,0.)); +#3448 = DIRECTION('',(0.,0.,1.)); +#3449 = ORIENTED_EDGE('',*,*,#3450,.T.); +#3450 = EDGE_CURVE('',#3442,#3451,#3453,.T.); +#3451 = VERTEX_POINT('',#3452); +#3452 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#3453 = LINE('',#3454,#3455); +#3454 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#3455 = VECTOR('',#3456,1.); +#3456 = DIRECTION('',(0.,0.,1.)); +#3457 = ORIENTED_EDGE('',*,*,#3458,.T.); +#3458 = EDGE_CURVE('',#3451,#3459,#3461,.T.); +#3459 = VERTEX_POINT('',#3460); +#3460 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#3461 = CIRCLE('',#3462,4.E-02); +#3462 = AXIS2_PLACEMENT_3D('',#3463,#3464,#3465); +#3463 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#3464 = DIRECTION('',(1.,0.,-0.)); +#3465 = DIRECTION('',(0.,0.,1.)); +#3466 = ORIENTED_EDGE('',*,*,#3467,.F.); +#3467 = EDGE_CURVE('',#3468,#3459,#3470,.T.); +#3468 = VERTEX_POINT('',#3469); +#3469 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#3470 = LINE('',#3471,#3472); +#3471 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#3472 = VECTOR('',#3473,1.); +#3473 = DIRECTION('',(0.,1.,0.)); +#3474 = ORIENTED_EDGE('',*,*,#3475,.F.); +#3475 = EDGE_CURVE('',#3417,#3468,#3476,.T.); +#3476 = CIRCLE('',#3477,4.E-02); +#3477 = AXIS2_PLACEMENT_3D('',#3478,#3479,#3480); +#3478 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#3479 = DIRECTION('',(-1.,0.,0.)); +#3480 = DIRECTION('',(0.,0.,1.)); +#3481 = PLANE('',#3482); +#3482 = AXIS2_PLACEMENT_3D('',#3483,#3484,#3485); +#3483 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3484 = DIRECTION('',(1.,0.,0.)); +#3485 = DIRECTION('',(0.,0.,1.)); +#3486 = ADVANCED_FACE('',(#3487),#3512,.F.); +#3487 = FACE_BOUND('',#3488,.F.); +#3488 = EDGE_LOOP('',(#3489,#3499,#3505,#3506)); +#3489 = ORIENTED_EDGE('',*,*,#3490,.F.); +#3490 = EDGE_CURVE('',#3491,#3493,#3495,.T.); +#3491 = VERTEX_POINT('',#3492); +#3492 = CARTESIAN_POINT('',(-0.6,-0.625,4.E-02)); +#3493 = VERTEX_POINT('',#3494); +#3494 = CARTESIAN_POINT('',(-0.6,-0.625,1.21)); +#3495 = LINE('',#3496,#3497); +#3496 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#3497 = VECTOR('',#3498,1.); +#3498 = DIRECTION('',(0.,0.,1.)); +#3499 = ORIENTED_EDGE('',*,*,#3500,.F.); +#3500 = EDGE_CURVE('',#3415,#3491,#3501,.T.); +#3501 = LINE('',#3502,#3503); +#3502 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#3503 = VECTOR('',#3504,1.); +#3504 = DIRECTION('',(1.,0.,0.)); +#3505 = ORIENTED_EDGE('',*,*,#3414,.T.); +#3506 = ORIENTED_EDGE('',*,*,#3507,.T.); +#3507 = EDGE_CURVE('',#3417,#3493,#3508,.T.); +#3508 = LINE('',#3509,#3510); +#3509 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#3510 = VECTOR('',#3511,1.); +#3511 = DIRECTION('',(1.,0.,0.)); +#3512 = PLANE('',#3513); +#3513 = AXIS2_PLACEMENT_3D('',#3514,#3515,#3516); +#3514 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3515 = DIRECTION('',(0.,1.,0.)); +#3516 = DIRECTION('',(0.,-0.,1.)); +#3517 = ADVANCED_FACE('',(#3518),#3537,.T.); +#3518 = FACE_BOUND('',#3519,.T.); +#3519 = EDGE_LOOP('',(#3520,#3521,#3529,#3536)); +#3520 = ORIENTED_EDGE('',*,*,#3424,.T.); +#3521 = ORIENTED_EDGE('',*,*,#3522,.T.); +#3522 = EDGE_CURVE('',#3425,#3523,#3525,.T.); +#3523 = VERTEX_POINT('',#3524); +#3524 = CARTESIAN_POINT('',(-0.6,-0.585,0.)); +#3525 = LINE('',#3526,#3527); +#3526 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#3527 = VECTOR('',#3528,1.); +#3528 = DIRECTION('',(1.,0.,0.)); +#3529 = ORIENTED_EDGE('',*,*,#3530,.F.); +#3530 = EDGE_CURVE('',#3491,#3523,#3531,.T.); +#3531 = CIRCLE('',#3532,4.E-02); +#3532 = AXIS2_PLACEMENT_3D('',#3533,#3534,#3535); +#3533 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3534 = DIRECTION('',(1.,0.,-0.)); +#3535 = DIRECTION('',(0.,0.,1.)); +#3536 = ORIENTED_EDGE('',*,*,#3500,.F.); +#3537 = CYLINDRICAL_SURFACE('',#3538,4.E-02); +#3538 = AXIS2_PLACEMENT_3D('',#3539,#3540,#3541); +#3539 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#3540 = DIRECTION('',(1.,0.,0.)); +#3541 = DIRECTION('',(0.,-1.,0.)); +#3542 = ADVANCED_FACE('',(#3543),#3562,.T.); +#3543 = FACE_BOUND('',#3544,.T.); +#3544 = EDGE_LOOP('',(#3545,#3546,#3555,#3561)); +#3545 = ORIENTED_EDGE('',*,*,#3507,.T.); +#3546 = ORIENTED_EDGE('',*,*,#3547,.T.); +#3547 = EDGE_CURVE('',#3493,#3548,#3550,.T.); +#3548 = VERTEX_POINT('',#3549); +#3549 = CARTESIAN_POINT('',(-0.6,-0.585,1.25)); +#3550 = CIRCLE('',#3551,4.E-02); +#3551 = AXIS2_PLACEMENT_3D('',#3552,#3553,#3554); +#3552 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#3553 = DIRECTION('',(-1.,0.,0.)); +#3554 = DIRECTION('',(0.,0.,1.)); +#3555 = ORIENTED_EDGE('',*,*,#3556,.F.); +#3556 = EDGE_CURVE('',#3468,#3548,#3557,.T.); +#3557 = LINE('',#3558,#3559); +#3558 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#3559 = VECTOR('',#3560,1.); +#3560 = DIRECTION('',(1.,0.,0.)); +#3561 = ORIENTED_EDGE('',*,*,#3475,.F.); +#3562 = CYLINDRICAL_SURFACE('',#3563,4.E-02); +#3563 = AXIS2_PLACEMENT_3D('',#3564,#3565,#3566); +#3564 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#3565 = DIRECTION('',(1.,0.,0.)); +#3566 = DIRECTION('',(0.,-1.,0.)); +#3567 = ADVANCED_FACE('',(#3568),#3586,.F.); +#3568 = FACE_BOUND('',#3569,.F.); +#3569 = EDGE_LOOP('',(#3570,#3571,#3572,#3580)); +#3570 = ORIENTED_EDGE('',*,*,#3433,.F.); +#3571 = ORIENTED_EDGE('',*,*,#3522,.T.); +#3572 = ORIENTED_EDGE('',*,*,#3573,.T.); +#3573 = EDGE_CURVE('',#3523,#3574,#3576,.T.); +#3574 = VERTEX_POINT('',#3575); +#3575 = CARTESIAN_POINT('',(-0.6,0.585,0.)); +#3576 = LINE('',#3577,#3578); +#3577 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#3578 = VECTOR('',#3579,1.); +#3579 = DIRECTION('',(0.,1.,0.)); +#3580 = ORIENTED_EDGE('',*,*,#3581,.F.); +#3581 = EDGE_CURVE('',#3434,#3574,#3582,.T.); +#3582 = LINE('',#3583,#3584); +#3583 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#3584 = VECTOR('',#3585,1.); +#3585 = DIRECTION('',(1.,0.,0.)); +#3586 = PLANE('',#3587); +#3587 = AXIS2_PLACEMENT_3D('',#3588,#3589,#3590); +#3588 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#3589 = DIRECTION('',(0.,0.,1.)); +#3590 = DIRECTION('',(1.,0.,-0.)); +#3591 = ADVANCED_FACE('',(#3592),#3610,.T.); +#3592 = FACE_BOUND('',#3593,.T.); +#3593 = EDGE_LOOP('',(#3594,#3595,#3596,#3604)); +#3594 = ORIENTED_EDGE('',*,*,#3467,.F.); +#3595 = ORIENTED_EDGE('',*,*,#3556,.T.); +#3596 = ORIENTED_EDGE('',*,*,#3597,.T.); +#3597 = EDGE_CURVE('',#3548,#3598,#3600,.T.); +#3598 = VERTEX_POINT('',#3599); +#3599 = CARTESIAN_POINT('',(-0.6,0.585,1.25)); +#3600 = LINE('',#3601,#3602); +#3601 = CARTESIAN_POINT('',(-0.6,-0.625,1.25)); +#3602 = VECTOR('',#3603,1.); +#3603 = DIRECTION('',(0.,1.,0.)); +#3604 = ORIENTED_EDGE('',*,*,#3605,.F.); +#3605 = EDGE_CURVE('',#3459,#3598,#3606,.T.); +#3606 = LINE('',#3607,#3608); +#3607 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#3608 = VECTOR('',#3609,1.); +#3609 = DIRECTION('',(1.,0.,0.)); +#3610 = PLANE('',#3611); +#3611 = AXIS2_PLACEMENT_3D('',#3612,#3613,#3614); +#3612 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#3613 = DIRECTION('',(0.,0.,1.)); +#3614 = DIRECTION('',(1.,0.,-0.)); +#3615 = ADVANCED_FACE('',(#3616),#3635,.T.); +#3616 = FACE_BOUND('',#3617,.T.); +#3617 = EDGE_LOOP('',(#3618,#3626,#3633,#3634)); +#3618 = ORIENTED_EDGE('',*,*,#3619,.T.); +#3619 = EDGE_CURVE('',#3442,#3620,#3622,.T.); +#3620 = VERTEX_POINT('',#3621); +#3621 = CARTESIAN_POINT('',(-0.6,0.625,4.E-02)); +#3622 = LINE('',#3623,#3624); +#3623 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#3624 = VECTOR('',#3625,1.); +#3625 = DIRECTION('',(1.,0.,0.)); +#3626 = ORIENTED_EDGE('',*,*,#3627,.T.); +#3627 = EDGE_CURVE('',#3620,#3574,#3628,.T.); +#3628 = CIRCLE('',#3629,4.E-02); +#3629 = AXIS2_PLACEMENT_3D('',#3630,#3631,#3632); +#3630 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#3631 = DIRECTION('',(-1.,0.,0.)); +#3632 = DIRECTION('',(0.,0.,1.)); +#3633 = ORIENTED_EDGE('',*,*,#3581,.F.); +#3634 = ORIENTED_EDGE('',*,*,#3441,.F.); +#3635 = CYLINDRICAL_SURFACE('',#3636,4.E-02); +#3636 = AXIS2_PLACEMENT_3D('',#3637,#3638,#3639); +#3637 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#3638 = DIRECTION('',(1.,0.,0.)); +#3639 = DIRECTION('',(-0.,1.,0.)); +#3640 = ADVANCED_FACE('',(#3641),#3660,.T.); +#3641 = FACE_BOUND('',#3642,.T.); +#3642 = EDGE_LOOP('',(#3643,#3644,#3645,#3654)); +#3643 = ORIENTED_EDGE('',*,*,#3458,.T.); +#3644 = ORIENTED_EDGE('',*,*,#3605,.T.); +#3645 = ORIENTED_EDGE('',*,*,#3646,.F.); +#3646 = EDGE_CURVE('',#3647,#3598,#3649,.T.); +#3647 = VERTEX_POINT('',#3648); +#3648 = CARTESIAN_POINT('',(-0.6,0.625,1.21)); +#3649 = CIRCLE('',#3650,4.E-02); +#3650 = AXIS2_PLACEMENT_3D('',#3651,#3652,#3653); +#3651 = CARTESIAN_POINT('',(-0.6,0.585,1.21)); +#3652 = DIRECTION('',(1.,0.,-0.)); +#3653 = DIRECTION('',(0.,0.,1.)); +#3654 = ORIENTED_EDGE('',*,*,#3655,.F.); +#3655 = EDGE_CURVE('',#3451,#3647,#3656,.T.); +#3656 = LINE('',#3657,#3658); +#3657 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#3658 = VECTOR('',#3659,1.); +#3659 = DIRECTION('',(1.,0.,0.)); +#3660 = CYLINDRICAL_SURFACE('',#3661,4.E-02); +#3661 = AXIS2_PLACEMENT_3D('',#3662,#3663,#3664); +#3662 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#3663 = DIRECTION('',(1.,0.,0.)); +#3664 = DIRECTION('',(-0.,1.,0.)); +#3665 = ADVANCED_FACE('',(#3666),#3677,.T.); +#3666 = FACE_BOUND('',#3667,.T.); +#3667 = EDGE_LOOP('',(#3668,#3674,#3675,#3676)); +#3668 = ORIENTED_EDGE('',*,*,#3669,.F.); +#3669 = EDGE_CURVE('',#3620,#3647,#3670,.T.); +#3670 = LINE('',#3671,#3672); +#3671 = CARTESIAN_POINT('',(-0.6,0.625,0.)); +#3672 = VECTOR('',#3673,1.); +#3673 = DIRECTION('',(0.,0.,1.)); +#3674 = ORIENTED_EDGE('',*,*,#3619,.F.); +#3675 = ORIENTED_EDGE('',*,*,#3450,.T.); +#3676 = ORIENTED_EDGE('',*,*,#3655,.T.); +#3677 = PLANE('',#3678); +#3678 = AXIS2_PLACEMENT_3D('',#3679,#3680,#3681); +#3679 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#3680 = DIRECTION('',(0.,1.,0.)); +#3681 = DIRECTION('',(0.,-0.,1.)); +#3682 = ADVANCED_FACE('',(#3683,#3693),#3763,.T.); +#3683 = FACE_BOUND('',#3684,.T.); +#3684 = EDGE_LOOP('',(#3685,#3686,#3687,#3688,#3689,#3690,#3691,#3692)); +#3685 = ORIENTED_EDGE('',*,*,#3490,.F.); +#3686 = ORIENTED_EDGE('',*,*,#3530,.T.); +#3687 = ORIENTED_EDGE('',*,*,#3573,.T.); +#3688 = ORIENTED_EDGE('',*,*,#3627,.F.); +#3689 = ORIENTED_EDGE('',*,*,#3669,.T.); +#3690 = ORIENTED_EDGE('',*,*,#3646,.T.); +#3691 = ORIENTED_EDGE('',*,*,#3597,.F.); +#3692 = ORIENTED_EDGE('',*,*,#3547,.F.); +#3693 = FACE_BOUND('',#3694,.T.); +#3694 = EDGE_LOOP('',(#3695,#3706,#3714,#3723,#3731,#3740,#3748,#3757)); +#3695 = ORIENTED_EDGE('',*,*,#3696,.F.); +#3696 = EDGE_CURVE('',#3697,#3699,#3701,.T.); +#3697 = VERTEX_POINT('',#3698); +#3698 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#3699 = VERTEX_POINT('',#3700); +#3700 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#3701 = CIRCLE('',#3702,4.E-02); +#3702 = AXIS2_PLACEMENT_3D('',#3703,#3704,#3705); +#3703 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#3704 = DIRECTION('',(1.,0.,-0.)); +#3705 = DIRECTION('',(0.,0.,1.)); +#3706 = ORIENTED_EDGE('',*,*,#3707,.T.); +#3707 = EDGE_CURVE('',#3697,#3708,#3710,.T.); +#3708 = VERTEX_POINT('',#3709); +#3709 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#3710 = LINE('',#3711,#3712); +#3711 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3712 = VECTOR('',#3713,1.); +#3713 = DIRECTION('',(0.,0.,1.)); +#3714 = ORIENTED_EDGE('',*,*,#3715,.T.); +#3715 = EDGE_CURVE('',#3708,#3716,#3718,.T.); +#3716 = VERTEX_POINT('',#3717); +#3717 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#3718 = CIRCLE('',#3719,4.E-02); +#3719 = AXIS2_PLACEMENT_3D('',#3720,#3721,#3722); +#3720 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#3721 = DIRECTION('',(-1.,0.,0.)); +#3722 = DIRECTION('',(0.,0.,1.)); +#3723 = ORIENTED_EDGE('',*,*,#3724,.T.); +#3724 = EDGE_CURVE('',#3716,#3725,#3727,.T.); +#3725 = VERTEX_POINT('',#3726); +#3726 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#3727 = LINE('',#3728,#3729); +#3728 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#3729 = VECTOR('',#3730,1.); +#3730 = DIRECTION('',(0.,1.,0.)); +#3731 = ORIENTED_EDGE('',*,*,#3732,.F.); +#3732 = EDGE_CURVE('',#3733,#3725,#3735,.T.); +#3733 = VERTEX_POINT('',#3734); +#3734 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#3735 = CIRCLE('',#3736,4.E-02); +#3736 = AXIS2_PLACEMENT_3D('',#3737,#3738,#3739); +#3737 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#3738 = DIRECTION('',(1.,0.,-0.)); +#3739 = DIRECTION('',(0.,0.,1.)); +#3740 = ORIENTED_EDGE('',*,*,#3741,.F.); +#3741 = EDGE_CURVE('',#3742,#3733,#3744,.T.); +#3742 = VERTEX_POINT('',#3743); +#3743 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#3744 = LINE('',#3745,#3746); +#3745 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#3746 = VECTOR('',#3747,1.); +#3747 = DIRECTION('',(0.,0.,1.)); +#3748 = ORIENTED_EDGE('',*,*,#3749,.T.); +#3749 = EDGE_CURVE('',#3742,#3750,#3752,.T.); +#3750 = VERTEX_POINT('',#3751); +#3751 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#3752 = CIRCLE('',#3753,4.E-02); +#3753 = AXIS2_PLACEMENT_3D('',#3754,#3755,#3756); +#3754 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#3755 = DIRECTION('',(-1.,0.,0.)); +#3756 = DIRECTION('',(0.,0.,1.)); +#3757 = ORIENTED_EDGE('',*,*,#3758,.F.); +#3758 = EDGE_CURVE('',#3699,#3750,#3759,.T.); +#3759 = LINE('',#3760,#3761); +#3760 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3761 = VECTOR('',#3762,1.); +#3762 = DIRECTION('',(0.,1.,0.)); +#3763 = PLANE('',#3764); +#3764 = AXIS2_PLACEMENT_3D('',#3765,#3766,#3767); +#3765 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#3766 = DIRECTION('',(1.,0.,0.)); +#3767 = DIRECTION('',(0.,0.,1.)); +#3768 = ADVANCED_FACE('',(#3769),#3795,.T.); +#3769 = FACE_BOUND('',#3770,.T.); +#3770 = EDGE_LOOP('',(#3771,#3772,#3780,#3789)); +#3771 = ORIENTED_EDGE('',*,*,#3696,.T.); +#3772 = ORIENTED_EDGE('',*,*,#3773,.T.); +#3773 = EDGE_CURVE('',#3699,#3774,#3776,.T.); +#3774 = VERTEX_POINT('',#3775); +#3775 = CARTESIAN_POINT('',(0.6,-0.545,4.E-02)); +#3776 = LINE('',#3777,#3778); +#3777 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#3778 = VECTOR('',#3779,1.); +#3779 = DIRECTION('',(1.,0.,0.)); +#3780 = ORIENTED_EDGE('',*,*,#3781,.F.); +#3781 = EDGE_CURVE('',#3782,#3774,#3784,.T.); +#3782 = VERTEX_POINT('',#3783); +#3783 = CARTESIAN_POINT('',(0.6,-0.585,8.E-02)); +#3784 = CIRCLE('',#3785,4.E-02); +#3785 = AXIS2_PLACEMENT_3D('',#3786,#3787,#3788); +#3786 = CARTESIAN_POINT('',(0.6,-0.545,8.E-02)); +#3787 = DIRECTION('',(1.,0.,-0.)); +#3788 = DIRECTION('',(0.,0.,1.)); +#3789 = ORIENTED_EDGE('',*,*,#3790,.F.); +#3790 = EDGE_CURVE('',#3697,#3782,#3791,.T.); +#3791 = LINE('',#3792,#3793); +#3792 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#3793 = VECTOR('',#3794,1.); +#3794 = DIRECTION('',(1.,0.,0.)); +#3795 = CYLINDRICAL_SURFACE('',#3796,4.E-02); +#3796 = AXIS2_PLACEMENT_3D('',#3797,#3798,#3799); +#3797 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#3798 = DIRECTION('',(1.,0.,0.)); +#3799 = DIRECTION('',(0.,-1.,0.)); +#3800 = ADVANCED_FACE('',(#3801),#3819,.F.); +#3801 = FACE_BOUND('',#3802,.F.); +#3802 = EDGE_LOOP('',(#3803,#3804,#3805,#3813)); +#3803 = ORIENTED_EDGE('',*,*,#3758,.F.); +#3804 = ORIENTED_EDGE('',*,*,#3773,.T.); +#3805 = ORIENTED_EDGE('',*,*,#3806,.T.); +#3806 = EDGE_CURVE('',#3774,#3807,#3809,.T.); +#3807 = VERTEX_POINT('',#3808); +#3808 = CARTESIAN_POINT('',(0.6,0.545,4.E-02)); +#3809 = LINE('',#3810,#3811); +#3810 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#3811 = VECTOR('',#3812,1.); +#3812 = DIRECTION('',(0.,1.,0.)); +#3813 = ORIENTED_EDGE('',*,*,#3814,.F.); +#3814 = EDGE_CURVE('',#3750,#3807,#3815,.T.); +#3815 = LINE('',#3816,#3817); +#3816 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#3817 = VECTOR('',#3818,1.); +#3818 = DIRECTION('',(1.,0.,0.)); +#3819 = PLANE('',#3820); +#3820 = AXIS2_PLACEMENT_3D('',#3821,#3822,#3823); +#3821 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3822 = DIRECTION('',(0.,0.,1.)); +#3823 = DIRECTION('',(1.,0.,-0.)); +#3824 = ADVANCED_FACE('',(#3825),#3844,.T.); +#3825 = FACE_BOUND('',#3826,.T.); +#3826 = EDGE_LOOP('',(#3827,#3835,#3842,#3843)); +#3827 = ORIENTED_EDGE('',*,*,#3828,.T.); +#3828 = EDGE_CURVE('',#3742,#3829,#3831,.T.); +#3829 = VERTEX_POINT('',#3830); +#3830 = CARTESIAN_POINT('',(0.6,0.585,8.E-02)); +#3831 = LINE('',#3832,#3833); +#3832 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#3833 = VECTOR('',#3834,1.); +#3834 = DIRECTION('',(1.,0.,0.)); +#3835 = ORIENTED_EDGE('',*,*,#3836,.T.); +#3836 = EDGE_CURVE('',#3829,#3807,#3837,.T.); +#3837 = CIRCLE('',#3838,4.E-02); +#3838 = AXIS2_PLACEMENT_3D('',#3839,#3840,#3841); +#3839 = CARTESIAN_POINT('',(0.6,0.545,8.E-02)); +#3840 = DIRECTION('',(-1.,0.,0.)); +#3841 = DIRECTION('',(0.,0.,1.)); +#3842 = ORIENTED_EDGE('',*,*,#3814,.F.); +#3843 = ORIENTED_EDGE('',*,*,#3749,.F.); +#3844 = CYLINDRICAL_SURFACE('',#3845,4.E-02); +#3845 = AXIS2_PLACEMENT_3D('',#3846,#3847,#3848); +#3846 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#3847 = DIRECTION('',(1.,0.,0.)); +#3848 = DIRECTION('',(-0.,1.,0.)); +#3849 = ADVANCED_FACE('',(#3850),#3868,.T.); +#3850 = FACE_BOUND('',#3851,.T.); +#3851 = EDGE_LOOP('',(#3852,#3860,#3861,#3862)); +#3852 = ORIENTED_EDGE('',*,*,#3853,.F.); +#3853 = EDGE_CURVE('',#3829,#3854,#3856,.T.); +#3854 = VERTEX_POINT('',#3855); +#3855 = CARTESIAN_POINT('',(0.6,0.585,1.17)); +#3856 = LINE('',#3857,#3858); +#3857 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#3858 = VECTOR('',#3859,1.); +#3859 = DIRECTION('',(0.,0.,1.)); +#3860 = ORIENTED_EDGE('',*,*,#3828,.F.); +#3861 = ORIENTED_EDGE('',*,*,#3741,.T.); +#3862 = ORIENTED_EDGE('',*,*,#3863,.T.); +#3863 = EDGE_CURVE('',#3733,#3854,#3864,.T.); +#3864 = LINE('',#3865,#3866); +#3865 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#3866 = VECTOR('',#3867,1.); +#3867 = DIRECTION('',(1.,0.,0.)); +#3868 = PLANE('',#3869); +#3869 = AXIS2_PLACEMENT_3D('',#3870,#3871,#3872); +#3870 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#3871 = DIRECTION('',(0.,1.,0.)); +#3872 = DIRECTION('',(0.,-0.,1.)); +#3873 = ADVANCED_FACE('',(#3874),#3893,.T.); +#3874 = FACE_BOUND('',#3875,.T.); +#3875 = EDGE_LOOP('',(#3876,#3877,#3885,#3892)); +#3876 = ORIENTED_EDGE('',*,*,#3732,.T.); +#3877 = ORIENTED_EDGE('',*,*,#3878,.T.); +#3878 = EDGE_CURVE('',#3725,#3879,#3881,.T.); +#3879 = VERTEX_POINT('',#3880); +#3880 = CARTESIAN_POINT('',(0.6,0.545,1.21)); +#3881 = LINE('',#3882,#3883); +#3882 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#3883 = VECTOR('',#3884,1.); +#3884 = DIRECTION('',(1.,0.,0.)); +#3885 = ORIENTED_EDGE('',*,*,#3886,.F.); +#3886 = EDGE_CURVE('',#3854,#3879,#3887,.T.); +#3887 = CIRCLE('',#3888,4.E-02); +#3888 = AXIS2_PLACEMENT_3D('',#3889,#3890,#3891); +#3889 = CARTESIAN_POINT('',(0.6,0.545,1.17)); +#3890 = DIRECTION('',(1.,0.,-0.)); +#3891 = DIRECTION('',(0.,0.,1.)); +#3892 = ORIENTED_EDGE('',*,*,#3863,.F.); +#3893 = CYLINDRICAL_SURFACE('',#3894,4.E-02); +#3894 = AXIS2_PLACEMENT_3D('',#3895,#3896,#3897); +#3895 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#3896 = DIRECTION('',(1.,0.,0.)); +#3897 = DIRECTION('',(-0.,1.,0.)); +#3898 = ADVANCED_FACE('',(#3899),#3917,.T.); +#3899 = FACE_BOUND('',#3900,.T.); +#3900 = EDGE_LOOP('',(#3901,#3902,#3910,#3916)); +#3901 = ORIENTED_EDGE('',*,*,#3724,.F.); +#3902 = ORIENTED_EDGE('',*,*,#3903,.T.); +#3903 = EDGE_CURVE('',#3716,#3904,#3906,.T.); +#3904 = VERTEX_POINT('',#3905); +#3905 = CARTESIAN_POINT('',(0.6,-0.545,1.21)); +#3906 = LINE('',#3907,#3908); +#3907 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#3908 = VECTOR('',#3909,1.); +#3909 = DIRECTION('',(1.,0.,0.)); +#3910 = ORIENTED_EDGE('',*,*,#3911,.T.); +#3911 = EDGE_CURVE('',#3904,#3879,#3912,.T.); +#3912 = LINE('',#3913,#3914); +#3913 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#3914 = VECTOR('',#3915,1.); +#3915 = DIRECTION('',(0.,1.,0.)); +#3916 = ORIENTED_EDGE('',*,*,#3878,.F.); +#3917 = PLANE('',#3918); +#3918 = AXIS2_PLACEMENT_3D('',#3919,#3920,#3921); +#3919 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#3920 = DIRECTION('',(0.,0.,1.)); +#3921 = DIRECTION('',(1.,0.,-0.)); +#3922 = ADVANCED_FACE('',(#3923),#3942,.T.); +#3923 = FACE_BOUND('',#3924,.T.); +#3924 = EDGE_LOOP('',(#3925,#3933,#3940,#3941)); +#3925 = ORIENTED_EDGE('',*,*,#3926,.T.); +#3926 = EDGE_CURVE('',#3708,#3927,#3929,.T.); +#3927 = VERTEX_POINT('',#3928); +#3928 = CARTESIAN_POINT('',(0.6,-0.585,1.17)); +#3929 = LINE('',#3930,#3931); +#3930 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#3931 = VECTOR('',#3932,1.); +#3932 = DIRECTION('',(1.,0.,0.)); +#3933 = ORIENTED_EDGE('',*,*,#3934,.T.); +#3934 = EDGE_CURVE('',#3927,#3904,#3935,.T.); +#3935 = CIRCLE('',#3936,4.E-02); +#3936 = AXIS2_PLACEMENT_3D('',#3937,#3938,#3939); +#3937 = CARTESIAN_POINT('',(0.6,-0.545,1.17)); +#3938 = DIRECTION('',(-1.,0.,0.)); +#3939 = DIRECTION('',(0.,0.,1.)); +#3940 = ORIENTED_EDGE('',*,*,#3903,.F.); +#3941 = ORIENTED_EDGE('',*,*,#3715,.F.); +#3942 = CYLINDRICAL_SURFACE('',#3943,4.E-02); +#3943 = AXIS2_PLACEMENT_3D('',#3944,#3945,#3946); +#3944 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#3945 = DIRECTION('',(1.,0.,0.)); +#3946 = DIRECTION('',(0.,-1.,0.)); +#3947 = ADVANCED_FACE('',(#3948),#3959,.F.); +#3948 = FACE_BOUND('',#3949,.F.); +#3949 = EDGE_LOOP('',(#3950,#3956,#3957,#3958)); +#3950 = ORIENTED_EDGE('',*,*,#3951,.F.); +#3951 = EDGE_CURVE('',#3782,#3927,#3952,.T.); +#3952 = LINE('',#3953,#3954); +#3953 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#3954 = VECTOR('',#3955,1.); +#3955 = DIRECTION('',(0.,0.,1.)); +#3956 = ORIENTED_EDGE('',*,*,#3790,.F.); +#3957 = ORIENTED_EDGE('',*,*,#3707,.T.); +#3958 = ORIENTED_EDGE('',*,*,#3926,.T.); +#3959 = PLANE('',#3960); +#3960 = AXIS2_PLACEMENT_3D('',#3961,#3962,#3963); +#3961 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#3962 = DIRECTION('',(0.,1.,0.)); +#3963 = DIRECTION('',(0.,-0.,1.)); +#3964 = ADVANCED_FACE('',(#3965,#4035),#4045,.F.); +#3965 = FACE_BOUND('',#3966,.F.); +#3966 = EDGE_LOOP('',(#3967,#3977,#3986,#3994,#4003,#4011,#4020,#4028)); +#3967 = ORIENTED_EDGE('',*,*,#3968,.F.); +#3968 = EDGE_CURVE('',#3969,#3971,#3973,.T.); +#3969 = VERTEX_POINT('',#3970); +#3970 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#3971 = VERTEX_POINT('',#3972); +#3972 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#3973 = LINE('',#3974,#3975); +#3974 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#3975 = VECTOR('',#3976,1.); +#3976 = DIRECTION('',(0.,0.,1.)); +#3977 = ORIENTED_EDGE('',*,*,#3978,.T.); +#3978 = EDGE_CURVE('',#3969,#3979,#3981,.T.); +#3979 = VERTEX_POINT('',#3980); +#3980 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#3981 = CIRCLE('',#3982,4.E-02); +#3982 = AXIS2_PLACEMENT_3D('',#3983,#3984,#3985); +#3983 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#3984 = DIRECTION('',(1.,0.,-0.)); +#3985 = DIRECTION('',(0.,0.,1.)); +#3986 = ORIENTED_EDGE('',*,*,#3987,.T.); +#3987 = EDGE_CURVE('',#3979,#3988,#3990,.T.); +#3988 = VERTEX_POINT('',#3989); +#3989 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#3990 = LINE('',#3991,#3992); +#3991 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#3992 = VECTOR('',#3993,1.); +#3993 = DIRECTION('',(0.,1.,0.)); +#3994 = ORIENTED_EDGE('',*,*,#3995,.F.); +#3995 = EDGE_CURVE('',#3996,#3988,#3998,.T.); +#3996 = VERTEX_POINT('',#3997); +#3997 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#3998 = CIRCLE('',#3999,4.E-02); +#3999 = AXIS2_PLACEMENT_3D('',#4000,#4001,#4002); +#4000 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#4001 = DIRECTION('',(-1.,0.,0.)); +#4002 = DIRECTION('',(0.,0.,1.)); +#4003 = ORIENTED_EDGE('',*,*,#4004,.T.); +#4004 = EDGE_CURVE('',#3996,#4005,#4007,.T.); +#4005 = VERTEX_POINT('',#4006); +#4006 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#4007 = LINE('',#4008,#4009); +#4008 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#4009 = VECTOR('',#4010,1.); +#4010 = DIRECTION('',(0.,0.,1.)); +#4011 = ORIENTED_EDGE('',*,*,#4012,.T.); +#4012 = EDGE_CURVE('',#4005,#4013,#4015,.T.); +#4013 = VERTEX_POINT('',#4014); +#4014 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#4015 = CIRCLE('',#4016,4.E-02); +#4016 = AXIS2_PLACEMENT_3D('',#4017,#4018,#4019); +#4017 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#4018 = DIRECTION('',(1.,0.,-0.)); +#4019 = DIRECTION('',(0.,0.,1.)); +#4020 = ORIENTED_EDGE('',*,*,#4021,.F.); +#4021 = EDGE_CURVE('',#4022,#4013,#4024,.T.); +#4022 = VERTEX_POINT('',#4023); +#4023 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#4024 = LINE('',#4025,#4026); +#4025 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#4026 = VECTOR('',#4027,1.); +#4027 = DIRECTION('',(0.,1.,0.)); +#4028 = ORIENTED_EDGE('',*,*,#4029,.F.); +#4029 = EDGE_CURVE('',#3971,#4022,#4030,.T.); +#4030 = CIRCLE('',#4031,4.E-02); +#4031 = AXIS2_PLACEMENT_3D('',#4032,#4033,#4034); +#4032 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#4033 = DIRECTION('',(-1.,0.,0.)); +#4034 = DIRECTION('',(0.,0.,1.)); +#4035 = FACE_BOUND('',#4036,.F.); +#4036 = EDGE_LOOP('',(#4037,#4038,#4039,#4040,#4041,#4042,#4043,#4044)); +#4037 = ORIENTED_EDGE('',*,*,#3781,.F.); +#4038 = ORIENTED_EDGE('',*,*,#3951,.T.); +#4039 = ORIENTED_EDGE('',*,*,#3934,.T.); +#4040 = ORIENTED_EDGE('',*,*,#3911,.T.); +#4041 = ORIENTED_EDGE('',*,*,#3886,.F.); +#4042 = ORIENTED_EDGE('',*,*,#3853,.F.); +#4043 = ORIENTED_EDGE('',*,*,#3836,.T.); +#4044 = ORIENTED_EDGE('',*,*,#3806,.F.); +#4045 = PLANE('',#4046); +#4046 = AXIS2_PLACEMENT_3D('',#4047,#4048,#4049); +#4047 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#4048 = DIRECTION('',(1.,0.,0.)); +#4049 = DIRECTION('',(0.,0.,1.)); +#4050 = ADVANCED_FACE('',(#4051),#4076,.F.); +#4051 = FACE_BOUND('',#4052,.F.); +#4052 = EDGE_LOOP('',(#4053,#4063,#4069,#4070)); +#4053 = ORIENTED_EDGE('',*,*,#4054,.F.); +#4054 = EDGE_CURVE('',#4055,#4057,#4059,.T.); +#4055 = VERTEX_POINT('',#4056); +#4056 = CARTESIAN_POINT('',(1.,-0.625,4.E-02)); +#4057 = VERTEX_POINT('',#4058); +#4058 = CARTESIAN_POINT('',(1.,-0.625,1.21)); +#4059 = LINE('',#4060,#4061); +#4060 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#4061 = VECTOR('',#4062,1.); +#4062 = DIRECTION('',(0.,0.,1.)); +#4063 = ORIENTED_EDGE('',*,*,#4064,.F.); +#4064 = EDGE_CURVE('',#3969,#4055,#4065,.T.); +#4065 = LINE('',#4066,#4067); +#4066 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#4067 = VECTOR('',#4068,1.); +#4068 = DIRECTION('',(1.,0.,0.)); +#4069 = ORIENTED_EDGE('',*,*,#3968,.T.); +#4070 = ORIENTED_EDGE('',*,*,#4071,.T.); +#4071 = EDGE_CURVE('',#3971,#4057,#4072,.T.); +#4072 = LINE('',#4073,#4074); +#4073 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#4074 = VECTOR('',#4075,1.); +#4075 = DIRECTION('',(1.,0.,0.)); +#4076 = PLANE('',#4077); +#4077 = AXIS2_PLACEMENT_3D('',#4078,#4079,#4080); +#4078 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#4079 = DIRECTION('',(0.,1.,0.)); +#4080 = DIRECTION('',(0.,-0.,1.)); +#4081 = ADVANCED_FACE('',(#4082),#4101,.T.); +#4082 = FACE_BOUND('',#4083,.T.); +#4083 = EDGE_LOOP('',(#4084,#4085,#4093,#4100)); +#4084 = ORIENTED_EDGE('',*,*,#3978,.T.); +#4085 = ORIENTED_EDGE('',*,*,#4086,.T.); +#4086 = EDGE_CURVE('',#3979,#4087,#4089,.T.); +#4087 = VERTEX_POINT('',#4088); +#4088 = CARTESIAN_POINT('',(1.,-0.585,0.)); +#4089 = LINE('',#4090,#4091); +#4090 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#4091 = VECTOR('',#4092,1.); +#4092 = DIRECTION('',(1.,0.,0.)); +#4093 = ORIENTED_EDGE('',*,*,#4094,.F.); +#4094 = EDGE_CURVE('',#4055,#4087,#4095,.T.); +#4095 = CIRCLE('',#4096,4.E-02); +#4096 = AXIS2_PLACEMENT_3D('',#4097,#4098,#4099); +#4097 = CARTESIAN_POINT('',(1.,-0.585,4.E-02)); +#4098 = DIRECTION('',(1.,0.,-0.)); +#4099 = DIRECTION('',(0.,0.,1.)); +#4100 = ORIENTED_EDGE('',*,*,#4064,.F.); +#4101 = CYLINDRICAL_SURFACE('',#4102,4.E-02); +#4102 = AXIS2_PLACEMENT_3D('',#4103,#4104,#4105); +#4103 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#4104 = DIRECTION('',(1.,0.,0.)); +#4105 = DIRECTION('',(0.,-1.,0.)); +#4106 = ADVANCED_FACE('',(#4107),#4126,.T.); +#4107 = FACE_BOUND('',#4108,.T.); +#4108 = EDGE_LOOP('',(#4109,#4110,#4119,#4125)); +#4109 = ORIENTED_EDGE('',*,*,#4071,.T.); +#4110 = ORIENTED_EDGE('',*,*,#4111,.T.); +#4111 = EDGE_CURVE('',#4057,#4112,#4114,.T.); +#4112 = VERTEX_POINT('',#4113); +#4113 = CARTESIAN_POINT('',(1.,-0.585,1.25)); +#4114 = CIRCLE('',#4115,4.E-02); +#4115 = AXIS2_PLACEMENT_3D('',#4116,#4117,#4118); +#4116 = CARTESIAN_POINT('',(1.,-0.585,1.21)); +#4117 = DIRECTION('',(-1.,0.,0.)); +#4118 = DIRECTION('',(0.,0.,1.)); +#4119 = ORIENTED_EDGE('',*,*,#4120,.F.); +#4120 = EDGE_CURVE('',#4022,#4112,#4121,.T.); +#4121 = LINE('',#4122,#4123); +#4122 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#4123 = VECTOR('',#4124,1.); +#4124 = DIRECTION('',(1.,0.,0.)); +#4125 = ORIENTED_EDGE('',*,*,#4029,.F.); +#4126 = CYLINDRICAL_SURFACE('',#4127,4.E-02); +#4127 = AXIS2_PLACEMENT_3D('',#4128,#4129,#4130); +#4128 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#4129 = DIRECTION('',(1.,0.,0.)); +#4130 = DIRECTION('',(0.,-1.,0.)); +#4131 = ADVANCED_FACE('',(#4132),#4150,.F.); +#4132 = FACE_BOUND('',#4133,.F.); +#4133 = EDGE_LOOP('',(#4134,#4135,#4136,#4144)); +#4134 = ORIENTED_EDGE('',*,*,#3987,.F.); +#4135 = ORIENTED_EDGE('',*,*,#4086,.T.); +#4136 = ORIENTED_EDGE('',*,*,#4137,.T.); +#4137 = EDGE_CURVE('',#4087,#4138,#4140,.T.); +#4138 = VERTEX_POINT('',#4139); +#4139 = CARTESIAN_POINT('',(1.,0.585,0.)); +#4140 = LINE('',#4141,#4142); +#4141 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#4142 = VECTOR('',#4143,1.); +#4143 = DIRECTION('',(0.,1.,0.)); +#4144 = ORIENTED_EDGE('',*,*,#4145,.F.); +#4145 = EDGE_CURVE('',#3988,#4138,#4146,.T.); +#4146 = LINE('',#4147,#4148); +#4147 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#4148 = VECTOR('',#4149,1.); +#4149 = DIRECTION('',(1.,0.,0.)); +#4150 = PLANE('',#4151); +#4151 = AXIS2_PLACEMENT_3D('',#4152,#4153,#4154); +#4152 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#4153 = DIRECTION('',(0.,0.,1.)); +#4154 = DIRECTION('',(1.,0.,-0.)); +#4155 = ADVANCED_FACE('',(#4156),#4174,.T.); +#4156 = FACE_BOUND('',#4157,.T.); +#4157 = EDGE_LOOP('',(#4158,#4159,#4160,#4168)); +#4158 = ORIENTED_EDGE('',*,*,#4021,.F.); +#4159 = ORIENTED_EDGE('',*,*,#4120,.T.); +#4160 = ORIENTED_EDGE('',*,*,#4161,.T.); +#4161 = EDGE_CURVE('',#4112,#4162,#4164,.T.); +#4162 = VERTEX_POINT('',#4163); +#4163 = CARTESIAN_POINT('',(1.,0.585,1.25)); +#4164 = LINE('',#4165,#4166); +#4165 = CARTESIAN_POINT('',(1.,-0.625,1.25)); +#4166 = VECTOR('',#4167,1.); +#4167 = DIRECTION('',(0.,1.,0.)); +#4168 = ORIENTED_EDGE('',*,*,#4169,.F.); +#4169 = EDGE_CURVE('',#4013,#4162,#4170,.T.); +#4170 = LINE('',#4171,#4172); +#4171 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#4172 = VECTOR('',#4173,1.); +#4173 = DIRECTION('',(1.,0.,0.)); +#4174 = PLANE('',#4175); +#4175 = AXIS2_PLACEMENT_3D('',#4176,#4177,#4178); +#4176 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#4177 = DIRECTION('',(0.,0.,1.)); +#4178 = DIRECTION('',(1.,0.,-0.)); +#4179 = ADVANCED_FACE('',(#4180),#4199,.T.); +#4180 = FACE_BOUND('',#4181,.T.); +#4181 = EDGE_LOOP('',(#4182,#4190,#4197,#4198)); +#4182 = ORIENTED_EDGE('',*,*,#4183,.T.); +#4183 = EDGE_CURVE('',#3996,#4184,#4186,.T.); +#4184 = VERTEX_POINT('',#4185); +#4185 = CARTESIAN_POINT('',(1.,0.625,4.E-02)); +#4186 = LINE('',#4187,#4188); +#4187 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#4188 = VECTOR('',#4189,1.); +#4189 = DIRECTION('',(1.,0.,0.)); +#4190 = ORIENTED_EDGE('',*,*,#4191,.T.); +#4191 = EDGE_CURVE('',#4184,#4138,#4192,.T.); +#4192 = CIRCLE('',#4193,4.E-02); +#4193 = AXIS2_PLACEMENT_3D('',#4194,#4195,#4196); +#4194 = CARTESIAN_POINT('',(1.,0.585,4.E-02)); +#4195 = DIRECTION('',(-1.,0.,0.)); +#4196 = DIRECTION('',(0.,0.,1.)); +#4197 = ORIENTED_EDGE('',*,*,#4145,.F.); +#4198 = ORIENTED_EDGE('',*,*,#3995,.F.); +#4199 = CYLINDRICAL_SURFACE('',#4200,4.E-02); +#4200 = AXIS2_PLACEMENT_3D('',#4201,#4202,#4203); +#4201 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#4202 = DIRECTION('',(1.,0.,0.)); +#4203 = DIRECTION('',(-0.,1.,0.)); +#4204 = ADVANCED_FACE('',(#4205),#4224,.T.); +#4205 = FACE_BOUND('',#4206,.T.); +#4206 = EDGE_LOOP('',(#4207,#4208,#4209,#4218)); +#4207 = ORIENTED_EDGE('',*,*,#4012,.T.); +#4208 = ORIENTED_EDGE('',*,*,#4169,.T.); +#4209 = ORIENTED_EDGE('',*,*,#4210,.F.); +#4210 = EDGE_CURVE('',#4211,#4162,#4213,.T.); +#4211 = VERTEX_POINT('',#4212); +#4212 = CARTESIAN_POINT('',(1.,0.625,1.21)); +#4213 = CIRCLE('',#4214,4.E-02); +#4214 = AXIS2_PLACEMENT_3D('',#4215,#4216,#4217); +#4215 = CARTESIAN_POINT('',(1.,0.585,1.21)); +#4216 = DIRECTION('',(1.,0.,-0.)); +#4217 = DIRECTION('',(0.,0.,1.)); +#4218 = ORIENTED_EDGE('',*,*,#4219,.F.); +#4219 = EDGE_CURVE('',#4005,#4211,#4220,.T.); +#4220 = LINE('',#4221,#4222); +#4221 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#4222 = VECTOR('',#4223,1.); +#4223 = DIRECTION('',(1.,0.,0.)); +#4224 = CYLINDRICAL_SURFACE('',#4225,4.E-02); +#4225 = AXIS2_PLACEMENT_3D('',#4226,#4227,#4228); +#4226 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#4227 = DIRECTION('',(1.,0.,0.)); +#4228 = DIRECTION('',(-0.,1.,0.)); +#4229 = ADVANCED_FACE('',(#4230),#4241,.T.); +#4230 = FACE_BOUND('',#4231,.T.); +#4231 = EDGE_LOOP('',(#4232,#4238,#4239,#4240)); +#4232 = ORIENTED_EDGE('',*,*,#4233,.F.); +#4233 = EDGE_CURVE('',#4184,#4211,#4234,.T.); +#4234 = LINE('',#4235,#4236); +#4235 = CARTESIAN_POINT('',(1.,0.625,0.)); +#4236 = VECTOR('',#4237,1.); +#4237 = DIRECTION('',(0.,0.,1.)); +#4238 = ORIENTED_EDGE('',*,*,#4183,.F.); +#4239 = ORIENTED_EDGE('',*,*,#4004,.T.); +#4240 = ORIENTED_EDGE('',*,*,#4219,.T.); +#4241 = PLANE('',#4242); +#4242 = AXIS2_PLACEMENT_3D('',#4243,#4244,#4245); +#4243 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#4244 = DIRECTION('',(0.,1.,0.)); +#4245 = DIRECTION('',(0.,-0.,1.)); +#4246 = ADVANCED_FACE('',(#4247),#4257,.T.); +#4247 = FACE_BOUND('',#4248,.T.); +#4248 = EDGE_LOOP('',(#4249,#4250,#4251,#4252,#4253,#4254,#4255,#4256)); +#4249 = ORIENTED_EDGE('',*,*,#4054,.F.); +#4250 = ORIENTED_EDGE('',*,*,#4094,.T.); +#4251 = ORIENTED_EDGE('',*,*,#4137,.T.); +#4252 = ORIENTED_EDGE('',*,*,#4191,.F.); +#4253 = ORIENTED_EDGE('',*,*,#4233,.T.); +#4254 = ORIENTED_EDGE('',*,*,#4210,.T.); +#4255 = ORIENTED_EDGE('',*,*,#4161,.F.); +#4256 = ORIENTED_EDGE('',*,*,#4111,.F.); +#4257 = PLANE('',#4258); +#4258 = AXIS2_PLACEMENT_3D('',#4259,#4260,#4261); +#4259 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#4260 = DIRECTION('',(1.,0.,0.)); +#4261 = DIRECTION('',(0.,0.,1.)); +#4262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#4266)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#4263,#4264,#4265)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#4263 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#4264 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#4265 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#4266 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#4263, + 'distance_accuracy_value','confusion accuracy'); +#4267 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4268,#4270); +#4268 = ( REPRESENTATION_RELATIONSHIP('','',#3407,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4269) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4269 = ITEM_DEFINED_TRANSFORMATION('','',#11,#55); +#4270 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4271); +#4271 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','C5','',#5,#3402,$); +#4272 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#3404)); +#4273 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4274,#4276); +#4274 = ( REPRESENTATION_RELATIONSHIP('','',#3407,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4275) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4275 = ITEM_DEFINED_TRANSFORMATION('','',#11,#59); +#4276 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4277); +#4277 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12','C6','',#5,#3402,$); +#4278 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4279,#4281); +#4279 = ( REPRESENTATION_RELATIONSHIP('','',#1626,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4280) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4280 = ITEM_DEFINED_TRANSFORMATION('','',#11,#63); +#4281 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4282); +#4282 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('13','C7','',#5,#1621,$); +#4283 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4284,#4286); +#4284 = ( REPRESENTATION_RELATIONSHIP('','',#1626,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4285) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4285 = ITEM_DEFINED_TRANSFORMATION('','',#11,#67); +#4286 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4287); +#4287 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('14','C8','',#5,#1621,$); +#4288 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#4289,#4291); +#4289 = ( REPRESENTATION_RELATIONSHIP('','',#3407,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#4290) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#4290 = ITEM_DEFINED_TRANSFORMATION('','',#11,#71); +#4291 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #4292); +#4292 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('15','C9','',#5,#3402,$); +#4293 = SHAPE_DEFINITION_REPRESENTATION(#4294,#4300); +#4294 = PRODUCT_DEFINITION_SHAPE('','',#4295); +#4295 = PRODUCT_DEFINITION('design','',#4296,#4299); +#4296 = PRODUCT_DEFINITION_FORMATION('','',#4297); +#4297 = PRODUCT('D_SMA','D_SMA','',(#4298)); +#4298 = PRODUCT_CONTEXT('',#2,'mechanical'); +#4299 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#4300 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#4301),#5509); +#4301 = MANIFOLD_SOLID_BREP('',#4302); +#4302 = CLOSED_SHELL('',(#4303,#4343,#4426,#4451,#4526,#4543,#4560,#4577 + ,#4594,#4611,#4627,#4674,#4709,#4748,#4777,#4816,#4845,#4899,#4942, + #4965,#4988,#5011,#5062,#5085,#5102,#5176,#5200,#5267,#5279,#5291, + #5308,#5337,#5360,#5383,#5400,#5422,#5434,#5451,#5468,#5485,#5497)); +#4303 = ADVANCED_FACE('',(#4304),#4338,.T.); +#4304 = FACE_BOUND('',#4305,.T.); +#4305 = EDGE_LOOP('',(#4306,#4316,#4324,#4332)); +#4306 = ORIENTED_EDGE('',*,*,#4307,.T.); +#4307 = EDGE_CURVE('',#4308,#4310,#4312,.T.); +#4308 = VERTEX_POINT('',#4309); +#4309 = CARTESIAN_POINT('',(1.14,0.75,0.)); +#4310 = VERTEX_POINT('',#4311); +#4311 = CARTESIAN_POINT('',(2.353333333333,0.75,-2.775557561563E-17)); +#4312 = LINE('',#4313,#4314); +#4313 = CARTESIAN_POINT('',(2.28,0.75,0.)); +#4314 = VECTOR('',#4315,1.); +#4315 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4316 = ORIENTED_EDGE('',*,*,#4317,.T.); +#4317 = EDGE_CURVE('',#4310,#4318,#4320,.T.); +#4318 = VERTEX_POINT('',#4319); +#4319 = CARTESIAN_POINT('',(2.353333333333,-0.75,-2.775557561563E-17)); +#4320 = LINE('',#4321,#4322); +#4321 = CARTESIAN_POINT('',(2.353333333333,0.75,-2.775557561563E-17)); +#4322 = VECTOR('',#4323,1.); +#4323 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4324 = ORIENTED_EDGE('',*,*,#4325,.T.); +#4325 = EDGE_CURVE('',#4318,#4326,#4328,.T.); +#4326 = VERTEX_POINT('',#4327); +#4327 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4328 = LINE('',#4329,#4330); +#4329 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#4330 = VECTOR('',#4331,1.); +#4331 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4332 = ORIENTED_EDGE('',*,*,#4333,.T.); +#4333 = EDGE_CURVE('',#4326,#4308,#4334,.T.); +#4334 = LINE('',#4335,#4336); +#4335 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4336 = VECTOR('',#4337,1.); +#4337 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4338 = PLANE('',#4339); +#4339 = AXIS2_PLACEMENT_3D('',#4340,#4341,#4342); +#4340 = CARTESIAN_POINT('',(1.746666666667,-5.821951347626E-16, + -7.671995716851E-18)); +#4341 = DIRECTION('',(-1.332277103521E-17,5.237186372803E-33,-1.)); +#4342 = DIRECTION('',(1.,-2.22044604925E-16,-1.332277103521E-17)); +#4343 = ADVANCED_FACE('',(#4344),#4421,.T.); +#4344 = FACE_BOUND('',#4345,.T.); +#4345 = EDGE_LOOP('',(#4346,#4356,#4363,#4364,#4372,#4380,#4390,#4398, + #4406,#4414)); +#4346 = ORIENTED_EDGE('',*,*,#4347,.F.); +#4347 = EDGE_CURVE('',#4348,#4350,#4352,.T.); +#4348 = VERTEX_POINT('',#4349); +#4349 = CARTESIAN_POINT('',(2.5,0.75,0.146666666667)); +#4350 = VERTEX_POINT('',#4351); +#4351 = CARTESIAN_POINT('',(2.5,0.75,0.842343333333)); +#4352 = LINE('',#4353,#4354); +#4353 = CARTESIAN_POINT('',(2.5,0.75,0.)); +#4354 = VECTOR('',#4355,1.); +#4355 = DIRECTION('',(0.,0.,1.)); +#4356 = ORIENTED_EDGE('',*,*,#4357,.T.); +#4357 = EDGE_CURVE('',#4348,#4310,#4358,.T.); +#4358 = CIRCLE('',#4359,0.146666666667); +#4359 = AXIS2_PLACEMENT_3D('',#4360,#4361,#4362); +#4360 = CARTESIAN_POINT('',(2.353333333333,0.75,0.146666666667)); +#4361 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#4362 = DIRECTION('',(0.,0.,1.)); +#4363 = ORIENTED_EDGE('',*,*,#4307,.F.); +#4364 = ORIENTED_EDGE('',*,*,#4365,.T.); +#4365 = EDGE_CURVE('',#4308,#4366,#4368,.T.); +#4366 = VERTEX_POINT('',#4367); +#4367 = CARTESIAN_POINT('',(1.14,0.75,0.22)); +#4368 = LINE('',#4369,#4370); +#4369 = CARTESIAN_POINT('',(1.14,0.75,0.)); +#4370 = VECTOR('',#4371,1.); +#4371 = DIRECTION('',(0.,0.,1.)); +#4372 = ORIENTED_EDGE('',*,*,#4373,.F.); +#4373 = EDGE_CURVE('',#4374,#4366,#4376,.T.); +#4374 = VERTEX_POINT('',#4375); +#4375 = CARTESIAN_POINT('',(2.225259344883,0.75,0.22)); +#4376 = LINE('',#4377,#4378); +#4377 = CARTESIAN_POINT('',(2.108163247245,0.75,0.22)); +#4378 = VECTOR('',#4379,1.); +#4379 = DIRECTION('',(-1.,4.514825988711E-16,0.)); +#4380 = ORIENTED_EDGE('',*,*,#4381,.T.); +#4381 = EDGE_CURVE('',#4374,#4382,#4384,.T.); +#4382 = VERTEX_POINT('',#4383); +#4383 = CARTESIAN_POINT('',(2.225413939802,0.75,0.2222)); +#4384 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4385,#4386,#4387,#4388,#4389), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4385 = CARTESIAN_POINT('',(2.225259344883,0.75,0.22)); +#4386 = CARTESIAN_POINT('',(2.238768685756,0.75,0.412247910026)); +#4387 = CARTESIAN_POINT('',(2.25227825666,0.75,0.604499093572)); +#4388 = CARTESIAN_POINT('',(2.265788033788,0.75,0.796753211837)); +#4389 = CARTESIAN_POINT('',(2.279297998531,0.75,0.98901)); +#4390 = ORIENTED_EDGE('',*,*,#4391,.T.); +#4391 = EDGE_CURVE('',#4382,#4392,#4394,.T.); +#4392 = VERTEX_POINT('',#4393); +#4393 = CARTESIAN_POINT('',(2.28,0.75,0.2222)); +#4394 = LINE('',#4395,#4396); +#4395 = CARTESIAN_POINT('',(1.14,0.75,0.2222)); +#4396 = VECTOR('',#4397,1.); +#4397 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4398 = ORIENTED_EDGE('',*,*,#4399,.T.); +#4399 = EDGE_CURVE('',#4392,#4400,#4402,.T.); +#4400 = VERTEX_POINT('',#4401); +#4401 = CARTESIAN_POINT('',(2.28,0.75,0.98901)); +#4402 = LINE('',#4403,#4404); +#4403 = CARTESIAN_POINT('',(2.28,0.75,0.)); +#4404 = VECTOR('',#4405,1.); +#4405 = DIRECTION('',(0.,0.,1.)); +#4406 = ORIENTED_EDGE('',*,*,#4407,.T.); +#4407 = EDGE_CURVE('',#4400,#4408,#4410,.T.); +#4408 = VERTEX_POINT('',#4409); +#4409 = CARTESIAN_POINT('',(2.353333333333,0.75,0.98901)); +#4410 = LINE('',#4411,#4412); +#4411 = CARTESIAN_POINT('',(2.28,0.75,0.98901)); +#4412 = VECTOR('',#4413,1.); +#4413 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4414 = ORIENTED_EDGE('',*,*,#4415,.F.); +#4415 = EDGE_CURVE('',#4350,#4408,#4416,.T.); +#4416 = CIRCLE('',#4417,0.146666666667); +#4417 = AXIS2_PLACEMENT_3D('',#4418,#4419,#4420); +#4418 = CARTESIAN_POINT('',(2.353333333333,0.75,0.842343333333)); +#4419 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4420 = DIRECTION('',(0.,0.,1.)); +#4421 = PLANE('',#4422); +#4422 = AXIS2_PLACEMENT_3D('',#4423,#4424,#4425); +#4423 = CARTESIAN_POINT('',(1.991067149606,0.75,0.303091083877)); +#4424 = DIRECTION('',(4.514825988711E-16,1.,5.822139933717E-17)); +#4425 = DIRECTION('',(-1.,4.514825988711E-16,0.)); +#4426 = ADVANCED_FACE('',(#4427),#4446,.T.); +#4427 = FACE_BOUND('',#4428,.T.); +#4428 = EDGE_LOOP('',(#4429,#4437,#4444,#4445)); +#4429 = ORIENTED_EDGE('',*,*,#4430,.T.); +#4430 = EDGE_CURVE('',#4348,#4431,#4433,.T.); +#4431 = VERTEX_POINT('',#4432); +#4432 = CARTESIAN_POINT('',(2.5,-0.75,0.146666666667)); +#4433 = LINE('',#4434,#4435); +#4434 = CARTESIAN_POINT('',(2.5,0.75,0.146666666667)); +#4435 = VECTOR('',#4436,1.); +#4436 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4437 = ORIENTED_EDGE('',*,*,#4438,.T.); +#4438 = EDGE_CURVE('',#4431,#4318,#4439,.T.); +#4439 = CIRCLE('',#4440,0.146666666667); +#4440 = AXIS2_PLACEMENT_3D('',#4441,#4442,#4443); +#4441 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.146666666667)); +#4442 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#4443 = DIRECTION('',(0.,0.,1.)); +#4444 = ORIENTED_EDGE('',*,*,#4317,.F.); +#4445 = ORIENTED_EDGE('',*,*,#4357,.F.); +#4446 = CYLINDRICAL_SURFACE('',#4447,0.146666666667); +#4447 = AXIS2_PLACEMENT_3D('',#4448,#4449,#4450); +#4448 = CARTESIAN_POINT('',(2.353333333333,0.75,0.146666666667)); +#4449 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4450 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4451 = ADVANCED_FACE('',(#4452),#4521,.T.); +#4452 = FACE_BOUND('',#4453,.T.); +#4453 = EDGE_LOOP('',(#4454,#4455,#4463,#4472,#4480,#4488,#4496,#4506, + #4514,#4520)); +#4454 = ORIENTED_EDGE('',*,*,#4438,.F.); +#4455 = ORIENTED_EDGE('',*,*,#4456,.T.); +#4456 = EDGE_CURVE('',#4431,#4457,#4459,.T.); +#4457 = VERTEX_POINT('',#4458); +#4458 = CARTESIAN_POINT('',(2.5,-0.75,0.842343333333)); +#4459 = LINE('',#4460,#4461); +#4460 = CARTESIAN_POINT('',(2.5,-0.75,0.)); +#4461 = VECTOR('',#4462,1.); +#4462 = DIRECTION('',(0.,0.,1.)); +#4463 = ORIENTED_EDGE('',*,*,#4464,.T.); +#4464 = EDGE_CURVE('',#4457,#4465,#4467,.T.); +#4465 = VERTEX_POINT('',#4466); +#4466 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.98901)); +#4467 = CIRCLE('',#4468,0.146666666667); +#4468 = AXIS2_PLACEMENT_3D('',#4469,#4470,#4471); +#4469 = CARTESIAN_POINT('',(2.353333333333,-0.75,0.842343333333)); +#4470 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4471 = DIRECTION('',(0.,0.,1.)); +#4472 = ORIENTED_EDGE('',*,*,#4473,.T.); +#4473 = EDGE_CURVE('',#4465,#4474,#4476,.T.); +#4474 = VERTEX_POINT('',#4475); +#4475 = CARTESIAN_POINT('',(2.28,-0.75,0.98901)); +#4476 = LINE('',#4477,#4478); +#4477 = CARTESIAN_POINT('',(2.5,-0.75,0.98901)); +#4478 = VECTOR('',#4479,1.); +#4479 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4480 = ORIENTED_EDGE('',*,*,#4481,.F.); +#4481 = EDGE_CURVE('',#4482,#4474,#4484,.T.); +#4482 = VERTEX_POINT('',#4483); +#4483 = CARTESIAN_POINT('',(2.28,-0.75,0.2222)); +#4484 = LINE('',#4485,#4486); +#4485 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#4486 = VECTOR('',#4487,1.); +#4487 = DIRECTION('',(0.,0.,1.)); +#4488 = ORIENTED_EDGE('',*,*,#4489,.T.); +#4489 = EDGE_CURVE('',#4482,#4490,#4492,.T.); +#4490 = VERTEX_POINT('',#4491); +#4491 = CARTESIAN_POINT('',(2.225413939802,-0.75,0.2222)); +#4492 = LINE('',#4493,#4494); +#4493 = CARTESIAN_POINT('',(2.28,-0.75,0.2222)); +#4494 = VECTOR('',#4495,1.); +#4495 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4496 = ORIENTED_EDGE('',*,*,#4497,.F.); +#4497 = EDGE_CURVE('',#4498,#4490,#4500,.T.); +#4498 = VERTEX_POINT('',#4499); +#4499 = CARTESIAN_POINT('',(2.225259344883,-0.75,0.22)); +#4500 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4501,#4502,#4503,#4504,#4505), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4501 = CARTESIAN_POINT('',(2.225259344883,-0.75,0.22)); +#4502 = CARTESIAN_POINT('',(2.238768685756,-0.75,0.412247910026)); +#4503 = CARTESIAN_POINT('',(2.25227825666,-0.75,0.604499093572)); +#4504 = CARTESIAN_POINT('',(2.265788033788,-0.75,0.796753211837)); +#4505 = CARTESIAN_POINT('',(2.279297998531,-0.75,0.98901)); +#4506 = ORIENTED_EDGE('',*,*,#4507,.F.); +#4507 = EDGE_CURVE('',#4508,#4498,#4510,.T.); +#4508 = VERTEX_POINT('',#4509); +#4509 = CARTESIAN_POINT('',(1.14,-0.75,0.22)); +#4510 = LINE('',#4511,#4512); +#4511 = CARTESIAN_POINT('',(2.108163247245,-0.75,0.22)); +#4512 = VECTOR('',#4513,1.); +#4513 = DIRECTION('',(1.,-2.844998265321E-16,-0.)); +#4514 = ORIENTED_EDGE('',*,*,#4515,.F.); +#4515 = EDGE_CURVE('',#4326,#4508,#4516,.T.); +#4516 = LINE('',#4517,#4518); +#4517 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4518 = VECTOR('',#4519,1.); +#4519 = DIRECTION('',(0.,0.,1.)); +#4520 = ORIENTED_EDGE('',*,*,#4325,.F.); +#4521 = PLANE('',#4522); +#4522 = AXIS2_PLACEMENT_3D('',#4523,#4524,#4525); +#4523 = CARTESIAN_POINT('',(1.991067149606,-0.75,0.303091083877)); +#4524 = DIRECTION('',(-2.844998265321E-16,-1.,-7.396066644327E-17)); +#4525 = DIRECTION('',(1.642256696039E-32,7.396066644327E-17,-1.)); +#4526 = ADVANCED_FACE('',(#4527),#4538,.T.); +#4527 = FACE_BOUND('',#4528,.T.); +#4528 = EDGE_LOOP('',(#4529,#4530,#4531,#4537)); +#4529 = ORIENTED_EDGE('',*,*,#4333,.F.); +#4530 = ORIENTED_EDGE('',*,*,#4515,.T.); +#4531 = ORIENTED_EDGE('',*,*,#4532,.F.); +#4532 = EDGE_CURVE('',#4366,#4508,#4533,.T.); +#4533 = LINE('',#4534,#4535); +#4534 = CARTESIAN_POINT('',(1.14,-1.022629672442,0.22)); +#4535 = VECTOR('',#4536,1.); +#4536 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4537 = ORIENTED_EDGE('',*,*,#4365,.F.); +#4538 = PLANE('',#4539); +#4539 = AXIS2_PLACEMENT_3D('',#4540,#4541,#4542); +#4540 = CARTESIAN_POINT('',(1.14,-0.75,0.)); +#4541 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4542 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4543 = ADVANCED_FACE('',(#4544),#4555,.T.); +#4544 = FACE_BOUND('',#4545,.T.); +#4545 = EDGE_LOOP('',(#4546,#4547,#4553,#4554)); +#4546 = ORIENTED_EDGE('',*,*,#4347,.T.); +#4547 = ORIENTED_EDGE('',*,*,#4548,.T.); +#4548 = EDGE_CURVE('',#4350,#4457,#4549,.T.); +#4549 = LINE('',#4550,#4551); +#4550 = CARTESIAN_POINT('',(2.5,0.75,0.842343333333)); +#4551 = VECTOR('',#4552,1.); +#4552 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4553 = ORIENTED_EDGE('',*,*,#4456,.F.); +#4554 = ORIENTED_EDGE('',*,*,#4430,.F.); +#4555 = PLANE('',#4556); +#4556 = AXIS2_PLACEMENT_3D('',#4557,#4558,#4559); +#4557 = CARTESIAN_POINT('',(2.5,0.75,0.)); +#4558 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4559 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4560 = ADVANCED_FACE('',(#4561),#4572,.T.); +#4561 = FACE_BOUND('',#4562,.T.); +#4562 = EDGE_LOOP('',(#4563,#4564,#4570,#4571)); +#4563 = ORIENTED_EDGE('',*,*,#4415,.T.); +#4564 = ORIENTED_EDGE('',*,*,#4565,.T.); +#4565 = EDGE_CURVE('',#4408,#4465,#4566,.T.); +#4566 = LINE('',#4567,#4568); +#4567 = CARTESIAN_POINT('',(2.353333333333,0.75,0.98901)); +#4568 = VECTOR('',#4569,1.); +#4569 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4570 = ORIENTED_EDGE('',*,*,#4464,.F.); +#4571 = ORIENTED_EDGE('',*,*,#4548,.F.); +#4572 = CYLINDRICAL_SURFACE('',#4573,0.146666666667); +#4573 = AXIS2_PLACEMENT_3D('',#4574,#4575,#4576); +#4574 = CARTESIAN_POINT('',(2.353333333333,0.75,0.842343333333)); +#4575 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4576 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#4577 = ADVANCED_FACE('',(#4578),#4589,.F.); +#4578 = FACE_BOUND('',#4579,.F.); +#4579 = EDGE_LOOP('',(#4580,#4581,#4582,#4583)); +#4580 = ORIENTED_EDGE('',*,*,#4407,.T.); +#4581 = ORIENTED_EDGE('',*,*,#4565,.T.); +#4582 = ORIENTED_EDGE('',*,*,#4473,.T.); +#4583 = ORIENTED_EDGE('',*,*,#4584,.T.); +#4584 = EDGE_CURVE('',#4474,#4400,#4585,.T.); +#4585 = LINE('',#4586,#4587); +#4586 = CARTESIAN_POINT('',(2.28,-0.75,0.98901)); +#4587 = VECTOR('',#4588,1.); +#4588 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4589 = PLANE('',#4590); +#4590 = AXIS2_PLACEMENT_3D('',#4591,#4592,#4593); +#4591 = CARTESIAN_POINT('',(2.39,-6.661338147751E-16,0.98901)); +#4592 = DIRECTION('',(0.,0.,-1.)); +#4593 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4594 = ADVANCED_FACE('',(#4595),#4606,.T.); +#4595 = FACE_BOUND('',#4596,.T.); +#4596 = EDGE_LOOP('',(#4597,#4603,#4604,#4605)); +#4597 = ORIENTED_EDGE('',*,*,#4598,.T.); +#4598 = EDGE_CURVE('',#4392,#4482,#4599,.T.); +#4599 = LINE('',#4600,#4601); +#4600 = CARTESIAN_POINT('',(2.28,0.75,0.2222)); +#4601 = VECTOR('',#4602,1.); +#4602 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#4603 = ORIENTED_EDGE('',*,*,#4481,.T.); +#4604 = ORIENTED_EDGE('',*,*,#4584,.T.); +#4605 = ORIENTED_EDGE('',*,*,#4399,.F.); +#4606 = PLANE('',#4607); +#4607 = AXIS2_PLACEMENT_3D('',#4608,#4609,#4610); +#4608 = CARTESIAN_POINT('',(2.28,-0.75,0.)); +#4609 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#4610 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4611 = ADVANCED_FACE('',(#4612),#4622,.F.); +#4612 = FACE_BOUND('',#4613,.F.); +#4613 = EDGE_LOOP('',(#4614,#4619,#4620,#4621)); +#4614 = ORIENTED_EDGE('',*,*,#4615,.F.); +#4615 = EDGE_CURVE('',#4382,#4490,#4616,.T.); +#4616 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4617,#4618),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4617 = CARTESIAN_POINT('',(2.225413939802,0.75,0.2222)); +#4618 = CARTESIAN_POINT('',(2.225413939802,-0.75,0.2222)); +#4619 = ORIENTED_EDGE('',*,*,#4391,.T.); +#4620 = ORIENTED_EDGE('',*,*,#4598,.T.); +#4621 = ORIENTED_EDGE('',*,*,#4489,.T.); +#4622 = PLANE('',#4623); +#4623 = AXIS2_PLACEMENT_3D('',#4624,#4625,#4626); +#4624 = CARTESIAN_POINT('',(1.71,-5.551115123126E-16,0.2222)); +#4625 = DIRECTION('',(0.,0.,-1.)); +#4626 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#4627 = ADVANCED_FACE('',(#4628),#4669,.T.); +#4628 = FACE_BOUND('',#4629,.T.); +#4629 = EDGE_LOOP('',(#4630,#4639,#4645,#4646,#4647,#4648,#4656,#4663)); +#4630 = ORIENTED_EDGE('',*,*,#4631,.F.); +#4631 = EDGE_CURVE('',#4632,#4634,#4636,.T.); +#4632 = VERTEX_POINT('',#4633); +#4633 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4634 = VERTEX_POINT('',#4635); +#4635 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4636 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4637,#4638),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4637 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4638 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4639 = ORIENTED_EDGE('',*,*,#4640,.T.); +#4640 = EDGE_CURVE('',#4632,#4498,#4641,.T.); +#4641 = LINE('',#4642,#4643); +#4642 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4643 = VECTOR('',#4644,1.); +#4644 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4645 = ORIENTED_EDGE('',*,*,#4497,.T.); +#4646 = ORIENTED_EDGE('',*,*,#4615,.F.); +#4647 = ORIENTED_EDGE('',*,*,#4381,.F.); +#4648 = ORIENTED_EDGE('',*,*,#4649,.T.); +#4649 = EDGE_CURVE('',#4374,#4650,#4652,.T.); +#4650 = VERTEX_POINT('',#4651); +#4651 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4652 = LINE('',#4653,#4654); +#4653 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4654 = VECTOR('',#4655,1.); +#4655 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4656 = ORIENTED_EDGE('',*,*,#4657,.T.); +#4657 = EDGE_CURVE('',#4650,#4658,#4660,.T.); +#4658 = VERTEX_POINT('',#4659); +#4659 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4660 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4661,#4662),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4661 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4662 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4663 = ORIENTED_EDGE('',*,*,#4664,.F.); +#4664 = EDGE_CURVE('',#4634,#4658,#4665,.T.); +#4665 = LINE('',#4666,#4667); +#4666 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4667 = VECTOR('',#4668,1.); +#4668 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4669 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4670,#4671) + ,(#4672,#4673 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4670 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4671 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4672 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4673 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4674 = ADVANCED_FACE('',(#4675),#4704,.T.); +#4675 = FACE_BOUND('',#4676,.T.); +#4676 = EDGE_LOOP('',(#4677,#4678,#4686,#4694,#4700,#4701,#4702,#4703)); +#4677 = ORIENTED_EDGE('',*,*,#4640,.F.); +#4678 = ORIENTED_EDGE('',*,*,#4679,.F.); +#4679 = EDGE_CURVE('',#4680,#4632,#4682,.T.); +#4680 = VERTEX_POINT('',#4681); +#4681 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#4682 = LINE('',#4683,#4684); +#4683 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4684 = VECTOR('',#4685,1.); +#4685 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4686 = ORIENTED_EDGE('',*,*,#4687,.T.); +#4687 = EDGE_CURVE('',#4680,#4688,#4690,.T.); +#4688 = VERTEX_POINT('',#4689); +#4689 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#4690 = LINE('',#4691,#4692); +#4691 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#4692 = VECTOR('',#4693,1.); +#4693 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4694 = ORIENTED_EDGE('',*,*,#4695,.F.); +#4695 = EDGE_CURVE('',#4650,#4688,#4696,.T.); +#4696 = LINE('',#4697,#4698); +#4697 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4698 = VECTOR('',#4699,1.); +#4699 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4700 = ORIENTED_EDGE('',*,*,#4649,.F.); +#4701 = ORIENTED_EDGE('',*,*,#4373,.T.); +#4702 = ORIENTED_EDGE('',*,*,#4532,.T.); +#4703 = ORIENTED_EDGE('',*,*,#4507,.T.); +#4704 = PLANE('',#4705); +#4705 = AXIS2_PLACEMENT_3D('',#4706,#4707,#4708); +#4706 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4707 = DIRECTION('',(0.,0.,-1.)); +#4708 = DIRECTION('',(-0.864253276514,0.503056929218,0.)); +#4709 = ADVANCED_FACE('',(#4710),#4743,.T.); +#4710 = FACE_BOUND('',#4711,.T.); +#4711 = EDGE_LOOP('',(#4712,#4722,#4728,#4729,#4730,#4738)); +#4712 = ORIENTED_EDGE('',*,*,#4713,.T.); +#4713 = EDGE_CURVE('',#4714,#4716,#4718,.T.); +#4714 = VERTEX_POINT('',#4715); +#4715 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4716 = VERTEX_POINT('',#4717); +#4717 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#4718 = LINE('',#4719,#4720); +#4719 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4720 = VECTOR('',#4721,1.); +#4721 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4722 = ORIENTED_EDGE('',*,*,#4723,.T.); +#4723 = EDGE_CURVE('',#4716,#4680,#4724,.T.); +#4724 = LINE('',#4725,#4726); +#4725 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#4726 = VECTOR('',#4727,1.); +#4727 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4728 = ORIENTED_EDGE('',*,*,#4679,.T.); +#4729 = ORIENTED_EDGE('',*,*,#4631,.T.); +#4730 = ORIENTED_EDGE('',*,*,#4731,.F.); +#4731 = EDGE_CURVE('',#4732,#4634,#4734,.T.); +#4732 = VERTEX_POINT('',#4733); +#4733 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4734 = LINE('',#4735,#4736); +#4735 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4736 = VECTOR('',#4737,1.); +#4737 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4738 = ORIENTED_EDGE('',*,*,#4739,.F.); +#4739 = EDGE_CURVE('',#4714,#4732,#4740,.T.); +#4740 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4741,#4742),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4741 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4742 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4743 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4744,#4745) + ,(#4746,#4747 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4744 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4745 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4746 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4747 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4748 = ADVANCED_FACE('',(#4749),#4772,.T.); +#4749 = FACE_BOUND('',#4750,.T.); +#4750 = EDGE_LOOP('',(#4751,#4752,#4759,#4767)); +#4751 = ORIENTED_EDGE('',*,*,#4664,.T.); +#4752 = ORIENTED_EDGE('',*,*,#4753,.T.); +#4753 = EDGE_CURVE('',#4658,#4754,#4756,.T.); +#4754 = VERTEX_POINT('',#4755); +#4755 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#4756 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4757,#4758),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4757 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4758 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#4759 = ORIENTED_EDGE('',*,*,#4760,.F.); +#4760 = EDGE_CURVE('',#4761,#4754,#4763,.T.); +#4761 = VERTEX_POINT('',#4762); +#4762 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4763 = LINE('',#4764,#4765); +#4764 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4765 = VECTOR('',#4766,1.); +#4766 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4767 = ORIENTED_EDGE('',*,*,#4768,.F.); +#4768 = EDGE_CURVE('',#4634,#4761,#4769,.T.); +#4769 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4770,#4771),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4770 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4771 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4772 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4773,#4774) + ,(#4775,#4776 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4773 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4774 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4775 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4776 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#4777 = ADVANCED_FACE('',(#4778),#4811,.T.); +#4778 = FACE_BOUND('',#4779,.T.); +#4779 = EDGE_LOOP('',(#4780,#4781,#4789,#4797,#4804,#4810)); +#4780 = ORIENTED_EDGE('',*,*,#4695,.T.); +#4781 = ORIENTED_EDGE('',*,*,#4782,.T.); +#4782 = EDGE_CURVE('',#4688,#4783,#4785,.T.); +#4783 = VERTEX_POINT('',#4784); +#4784 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#4785 = LINE('',#4786,#4787); +#4786 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#4787 = VECTOR('',#4788,1.); +#4788 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4789 = ORIENTED_EDGE('',*,*,#4790,.T.); +#4790 = EDGE_CURVE('',#4783,#4791,#4793,.T.); +#4791 = VERTEX_POINT('',#4792); +#4792 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4793 = LINE('',#4794,#4795); +#4794 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4795 = VECTOR('',#4796,1.); +#4796 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4797 = ORIENTED_EDGE('',*,*,#4798,.T.); +#4798 = EDGE_CURVE('',#4791,#4799,#4801,.T.); +#4799 = VERTEX_POINT('',#4800); +#4800 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4801 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4802,#4803),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4802 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4803 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4804 = ORIENTED_EDGE('',*,*,#4805,.F.); +#4805 = EDGE_CURVE('',#4658,#4799,#4806,.T.); +#4806 = LINE('',#4807,#4808); +#4807 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4808 = VECTOR('',#4809,1.); +#4809 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4810 = ORIENTED_EDGE('',*,*,#4657,.F.); +#4811 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4812,#4813) + ,(#4814,#4815 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4812 = CARTESIAN_POINT('',(2.225259344883,1.295259344883,0.22)); +#4813 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#4814 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4815 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4816 = ADVANCED_FACE('',(#4817),#4840,.T.); +#4817 = FACE_BOUND('',#4818,.T.); +#4818 = EDGE_LOOP('',(#4819,#4829,#4834,#4835)); +#4819 = ORIENTED_EDGE('',*,*,#4820,.T.); +#4820 = EDGE_CURVE('',#4821,#4823,#4825,.T.); +#4821 = VERTEX_POINT('',#4822); +#4822 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#4823 = VERTEX_POINT('',#4824); +#4824 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#4825 = LINE('',#4826,#4827); +#4826 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#4827 = VECTOR('',#4828,1.); +#4828 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4829 = ORIENTED_EDGE('',*,*,#4830,.T.); +#4830 = EDGE_CURVE('',#4823,#4688,#4831,.T.); +#4831 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4832,#4833),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4832 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#4833 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#4834 = ORIENTED_EDGE('',*,*,#4687,.F.); +#4835 = ORIENTED_EDGE('',*,*,#4836,.F.); +#4836 = EDGE_CURVE('',#4821,#4680,#4837,.T.); +#4837 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4838,#4839),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4838 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#4839 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#4840 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4841,#4842) + ,(#4843,#4844 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.590518689767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#4841 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#4842 = CARTESIAN_POINT('',(1.1,-1.295259344883,0.22)); +#4843 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#4844 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#4845 = ADVANCED_FACE('',(#4846),#4894,.T.); +#4846 = FACE_BOUND('',#4847,.T.); +#4847 = EDGE_LOOP('',(#4848,#4849,#4855,#4856,#4864,#4872,#4880,#4888)); +#4848 = ORIENTED_EDGE('',*,*,#4790,.F.); +#4849 = ORIENTED_EDGE('',*,*,#4850,.T.); +#4850 = EDGE_CURVE('',#4783,#4716,#4851,.T.); +#4851 = LINE('',#4852,#4853); +#4852 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#4853 = VECTOR('',#4854,1.); +#4854 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4855 = ORIENTED_EDGE('',*,*,#4713,.F.); +#4856 = ORIENTED_EDGE('',*,*,#4857,.F.); +#4857 = EDGE_CURVE('',#4858,#4714,#4860,.T.); +#4858 = VERTEX_POINT('',#4859); +#4859 = CARTESIAN_POINT('',(-2.225259344883,-0.75,0.22)); +#4860 = LINE('',#4861,#4862); +#4861 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4862 = VECTOR('',#4863,1.); +#4863 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4864 = ORIENTED_EDGE('',*,*,#4865,.T.); +#4865 = EDGE_CURVE('',#4858,#4866,#4868,.T.); +#4866 = VERTEX_POINT('',#4867); +#4867 = CARTESIAN_POINT('',(-1.14,-0.75,0.22)); +#4868 = LINE('',#4869,#4870); +#4869 = CARTESIAN_POINT('',(0.117096097639,-0.75,0.22)); +#4870 = VECTOR('',#4871,1.); +#4871 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4872 = ORIENTED_EDGE('',*,*,#4873,.T.); +#4873 = EDGE_CURVE('',#4866,#4874,#4876,.T.); +#4874 = VERTEX_POINT('',#4875); +#4875 = CARTESIAN_POINT('',(-1.14,0.75,0.22)); +#4876 = LINE('',#4877,#4878); +#4877 = CARTESIAN_POINT('',(-1.14,-0.272629672442,0.22)); +#4878 = VECTOR('',#4879,1.); +#4879 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#4880 = ORIENTED_EDGE('',*,*,#4881,.T.); +#4881 = EDGE_CURVE('',#4874,#4882,#4884,.T.); +#4882 = VERTEX_POINT('',#4883); +#4883 = CARTESIAN_POINT('',(-2.225259344883,0.75,0.22)); +#4884 = LINE('',#4885,#4886); +#4885 = CARTESIAN_POINT('',(0.117096097639,0.75,0.22)); +#4886 = VECTOR('',#4887,1.); +#4887 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#4888 = ORIENTED_EDGE('',*,*,#4889,.F.); +#4889 = EDGE_CURVE('',#4791,#4882,#4890,.T.); +#4890 = LINE('',#4891,#4892); +#4891 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4892 = VECTOR('',#4893,1.); +#4893 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4894 = PLANE('',#4895); +#4895 = AXIS2_PLACEMENT_3D('',#4896,#4897,#4898); +#4896 = CARTESIAN_POINT('',(2.225259344883,-1.295259344883,0.22)); +#4897 = DIRECTION('',(0.,0.,-1.)); +#4898 = DIRECTION('',(-0.864253276514,0.503056929218,0.)); +#4899 = ADVANCED_FACE('',(#4900),#4937,.T.); +#4900 = FACE_BOUND('',#4901,.T.); +#4901 = EDGE_LOOP('',(#4902,#4903,#4904,#4914,#4921,#4929,#4930,#4931)); +#4902 = ORIENTED_EDGE('',*,*,#4798,.F.); +#4903 = ORIENTED_EDGE('',*,*,#4889,.T.); +#4904 = ORIENTED_EDGE('',*,*,#4905,.T.); +#4905 = EDGE_CURVE('',#4882,#4906,#4908,.T.); +#4906 = VERTEX_POINT('',#4907); +#4907 = CARTESIAN_POINT('',(-2.225413939802,0.75,0.2222)); +#4908 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4909,#4910,#4911,#4912,#4913), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4909 = CARTESIAN_POINT('',(-2.225259344883,0.75,0.22)); +#4910 = CARTESIAN_POINT('',(-2.238768685756,0.75,0.412247910026)); +#4911 = CARTESIAN_POINT('',(-2.25227825666,0.75,0.604499093572)); +#4912 = CARTESIAN_POINT('',(-2.265788033788,0.75,0.796753211837)); +#4913 = CARTESIAN_POINT('',(-2.279297998531,0.75,0.98901)); +#4914 = ORIENTED_EDGE('',*,*,#4915,.F.); +#4915 = EDGE_CURVE('',#4916,#4906,#4918,.T.); +#4916 = VERTEX_POINT('',#4917); +#4917 = CARTESIAN_POINT('',(-2.225413939802,-0.75,0.2222)); +#4918 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4919,#4920),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4919 = CARTESIAN_POINT('',(-2.225413939802,-0.75,0.2222)); +#4920 = CARTESIAN_POINT('',(-2.225413939802,0.75,0.2222)); +#4921 = ORIENTED_EDGE('',*,*,#4922,.F.); +#4922 = EDGE_CURVE('',#4858,#4916,#4923,.T.); +#4923 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4924,#4925,#4926,#4927,#4928), + .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4924 = CARTESIAN_POINT('',(-2.225259344883,-0.75,0.22)); +#4925 = CARTESIAN_POINT('',(-2.238768685756,-0.75,0.412247910026)); +#4926 = CARTESIAN_POINT('',(-2.25227825666,-0.75,0.604499093572)); +#4927 = CARTESIAN_POINT('',(-2.265788033788,-0.75,0.796753211837)); +#4928 = CARTESIAN_POINT('',(-2.279297998531,-0.75,0.98901)); +#4929 = ORIENTED_EDGE('',*,*,#4857,.T.); +#4930 = ORIENTED_EDGE('',*,*,#4739,.T.); +#4931 = ORIENTED_EDGE('',*,*,#4932,.F.); +#4932 = EDGE_CURVE('',#4799,#4732,#4933,.T.); +#4933 = LINE('',#4934,#4935); +#4934 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4935 = VECTOR('',#4936,1.); +#4936 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#4937 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4938,#4939) + ,(#4940,#4941 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4938 = CARTESIAN_POINT('',(-2.225259344883,1.295259344883,0.22)); +#4939 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4940 = CARTESIAN_POINT('',(-2.225259344883,-1.295259344883,0.22)); +#4941 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4942 = ADVANCED_FACE('',(#4943),#4960,.T.); +#4943 = FACE_BOUND('',#4944,.T.); +#4944 = EDGE_LOOP('',(#4945,#4953,#4954,#4955)); +#4945 = ORIENTED_EDGE('',*,*,#4946,.T.); +#4946 = EDGE_CURVE('',#4947,#4821,#4949,.T.); +#4947 = VERTEX_POINT('',#4948); +#4948 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#4949 = LINE('',#4950,#4951); +#4950 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#4951 = VECTOR('',#4952,1.); +#4952 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4953 = ORIENTED_EDGE('',*,*,#4836,.T.); +#4954 = ORIENTED_EDGE('',*,*,#4723,.F.); +#4955 = ORIENTED_EDGE('',*,*,#4956,.F.); +#4956 = EDGE_CURVE('',#4947,#4716,#4957,.T.); +#4957 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4958,#4959),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4958 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#4959 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#4960 = PLANE('',#4961); +#4961 = AXIS2_PLACEMENT_3D('',#4962,#4963,#4964); +#4962 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#4963 = DIRECTION('',(-2.214984063823E-16,-0.997540140447, + -7.009756199374E-02)); +#4964 = DIRECTION('',(1.,-2.22044604925E-16,-1.177128382009E-30)); +#4965 = ADVANCED_FACE('',(#4966),#4983,.T.); +#4966 = FACE_BOUND('',#4967,.T.); +#4967 = EDGE_LOOP('',(#4968,#4969,#4970,#4978)); +#4968 = ORIENTED_EDGE('',*,*,#4731,.T.); +#4969 = ORIENTED_EDGE('',*,*,#4768,.T.); +#4970 = ORIENTED_EDGE('',*,*,#4971,.F.); +#4971 = EDGE_CURVE('',#4972,#4761,#4974,.T.); +#4972 = VERTEX_POINT('',#4973); +#4973 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#4974 = LINE('',#4975,#4976); +#4975 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#4976 = VECTOR('',#4977,1.); +#4977 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#4978 = ORIENTED_EDGE('',*,*,#4979,.F.); +#4979 = EDGE_CURVE('',#4732,#4972,#4980,.T.); +#4980 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4981,#4982),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4981 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4982 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#4983 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4984,#4985) + ,(#4986,#4987 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4984 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#4985 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#4986 = CARTESIAN_POINT('',(2.28,-1.35,0.999)); +#4987 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#4988 = ADVANCED_FACE('',(#4989),#5006,.T.); +#4989 = FACE_BOUND('',#4990,.T.); +#4990 = EDGE_LOOP('',(#4991,#4992,#4999,#5005)); +#4991 = ORIENTED_EDGE('',*,*,#4805,.T.); +#4992 = ORIENTED_EDGE('',*,*,#4993,.T.); +#4993 = EDGE_CURVE('',#4799,#4994,#4996,.T.); +#4994 = VERTEX_POINT('',#4995); +#4995 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#4996 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4997,#4998),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4997 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#4998 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#4999 = ORIENTED_EDGE('',*,*,#5000,.F.); +#5000 = EDGE_CURVE('',#4754,#4994,#5001,.T.); +#5001 = LINE('',#5002,#5003); +#5002 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5003 = VECTOR('',#5004,1.); +#5004 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5005 = ORIENTED_EDGE('',*,*,#4753,.F.); +#5006 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5007,#5008) + ,(#5009,#5010 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5007 = CARTESIAN_POINT('',(2.28,1.35,0.999)); +#5008 = CARTESIAN_POINT('',(2.194199820414,1.264199820414,2.22)); +#5009 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5010 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5011 = ADVANCED_FACE('',(#5012,#5023),#5057,.F.); +#5012 = FACE_BOUND('',#5013,.F.); +#5013 = EDGE_LOOP('',(#5014,#5015,#5016,#5022)); +#5014 = ORIENTED_EDGE('',*,*,#4760,.F.); +#5015 = ORIENTED_EDGE('',*,*,#4971,.F.); +#5016 = ORIENTED_EDGE('',*,*,#5017,.F.); +#5017 = EDGE_CURVE('',#4994,#4972,#5018,.T.); +#5018 = LINE('',#5019,#5020); +#5019 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5020 = VECTOR('',#5021,1.); +#5021 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5022 = ORIENTED_EDGE('',*,*,#5000,.F.); +#5023 = FACE_BOUND('',#5024,.F.); +#5024 = EDGE_LOOP('',(#5025,#5035,#5043,#5051)); +#5025 = ORIENTED_EDGE('',*,*,#5026,.T.); +#5026 = EDGE_CURVE('',#5027,#5029,#5031,.T.); +#5027 = VERTEX_POINT('',#5028); +#5028 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5029 = VERTEX_POINT('',#5030); +#5030 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5031 = LINE('',#5032,#5033); +#5032 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5033 = VECTOR('',#5034,1.); +#5034 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5035 = ORIENTED_EDGE('',*,*,#5036,.T.); +#5036 = EDGE_CURVE('',#5029,#5037,#5039,.T.); +#5037 = VERTEX_POINT('',#5038); +#5038 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5039 = LINE('',#5040,#5041); +#5040 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5041 = VECTOR('',#5042,1.); +#5042 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5043 = ORIENTED_EDGE('',*,*,#5044,.T.); +#5044 = EDGE_CURVE('',#5037,#5045,#5047,.T.); +#5045 = VERTEX_POINT('',#5046); +#5046 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5047 = LINE('',#5048,#5049); +#5048 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5049 = VECTOR('',#5050,1.); +#5050 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5051 = ORIENTED_EDGE('',*,*,#5052,.T.); +#5052 = EDGE_CURVE('',#5045,#5027,#5053,.T.); +#5053 = LINE('',#5054,#5055); +#5054 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5055 = VECTOR('',#5056,1.); +#5056 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5057 = PLANE('',#5058); +#5058 = AXIS2_PLACEMENT_3D('',#5059,#5060,#5061); +#5059 = CARTESIAN_POINT('',(2.194199820414,-1.264199820414,2.22)); +#5060 = DIRECTION('',(0.,0.,-1.)); +#5061 = DIRECTION('',(-0.866473406918,0.499223231735,0.)); +#5062 = ADVANCED_FACE('',(#5063),#5080,.T.); +#5063 = FACE_BOUND('',#5064,.T.); +#5064 = EDGE_LOOP('',(#5065,#5073,#5078,#5079)); +#5065 = ORIENTED_EDGE('',*,*,#5066,.T.); +#5066 = EDGE_CURVE('',#4823,#5067,#5069,.T.); +#5067 = VERTEX_POINT('',#5068); +#5068 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5069 = LINE('',#5070,#5071); +#5070 = CARTESIAN_POINT('',(1.1,1.279799853066,0.)); +#5071 = VECTOR('',#5072,1.); +#5072 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5073 = ORIENTED_EDGE('',*,*,#5074,.T.); +#5074 = EDGE_CURVE('',#5067,#4783,#5075,.T.); +#5075 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5076,#5077),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5076 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5077 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5078 = ORIENTED_EDGE('',*,*,#4782,.F.); +#5079 = ORIENTED_EDGE('',*,*,#4830,.F.); +#5080 = PLANE('',#5081); +#5081 = AXIS2_PLACEMENT_3D('',#5082,#5083,#5084); +#5082 = CARTESIAN_POINT('',(1.1,1.295259344883,0.22)); +#5083 = DIRECTION('',(2.214984063823E-16,0.997540140447, + -7.009756199374E-02)); +#5084 = DIRECTION('',(-1.,2.22044604925E-16,-1.177128382009E-30)); +#5085 = ADVANCED_FACE('',(#5086),#5097,.T.); +#5086 = FACE_BOUND('',#5087,.F.); +#5087 = EDGE_LOOP('',(#5088,#5089,#5090,#5096)); +#5088 = ORIENTED_EDGE('',*,*,#4820,.T.); +#5089 = ORIENTED_EDGE('',*,*,#5066,.T.); +#5090 = ORIENTED_EDGE('',*,*,#5091,.T.); +#5091 = EDGE_CURVE('',#5067,#4947,#5092,.T.); +#5092 = LINE('',#5093,#5094); +#5093 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5094 = VECTOR('',#5095,1.); +#5095 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5096 = ORIENTED_EDGE('',*,*,#4946,.T.); +#5097 = PLANE('',#5098); +#5098 = AXIS2_PLACEMENT_3D('',#5099,#5100,#5101); +#5099 = CARTESIAN_POINT('',(1.1,-1.279799853066,0.)); +#5100 = DIRECTION('',(0.,0.,-1.)); +#5101 = DIRECTION('',(-0.651825367196,0.758369099238,0.)); +#5102 = ADVANCED_FACE('',(#5103),#5171,.T.); +#5103 = FACE_BOUND('',#5104,.T.); +#5104 = EDGE_LOOP('',(#5105,#5116,#5124,#5133,#5141,#5149,#5155,#5156, + #5157,#5165)); +#5105 = ORIENTED_EDGE('',*,*,#5106,.F.); +#5106 = EDGE_CURVE('',#5107,#5109,#5111,.T.); +#5107 = VERTEX_POINT('',#5108); +#5108 = CARTESIAN_POINT('',(-2.5,0.75,0.146666666667)); +#5109 = VERTEX_POINT('',#5110); +#5110 = CARTESIAN_POINT('',(-2.353333333333,0.75,-2.775557561563E-17)); +#5111 = CIRCLE('',#5112,0.146666666667); +#5112 = AXIS2_PLACEMENT_3D('',#5113,#5114,#5115); +#5113 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.146666666667)); +#5114 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5115 = DIRECTION('',(0.,0.,1.)); +#5116 = ORIENTED_EDGE('',*,*,#5117,.T.); +#5117 = EDGE_CURVE('',#5107,#5118,#5120,.T.); +#5118 = VERTEX_POINT('',#5119); +#5119 = CARTESIAN_POINT('',(-2.5,0.75,0.842343333333)); +#5120 = LINE('',#5121,#5122); +#5121 = CARTESIAN_POINT('',(-2.5,0.75,0.)); +#5122 = VECTOR('',#5123,1.); +#5123 = DIRECTION('',(0.,0.,1.)); +#5124 = ORIENTED_EDGE('',*,*,#5125,.T.); +#5125 = EDGE_CURVE('',#5118,#5126,#5128,.T.); +#5126 = VERTEX_POINT('',#5127); +#5127 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.98901)); +#5128 = CIRCLE('',#5129,0.146666666667); +#5129 = AXIS2_PLACEMENT_3D('',#5130,#5131,#5132); +#5130 = CARTESIAN_POINT('',(-2.353333333333,0.75,0.842343333333)); +#5131 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#5132 = DIRECTION('',(0.,0.,1.)); +#5133 = ORIENTED_EDGE('',*,*,#5134,.T.); +#5134 = EDGE_CURVE('',#5126,#5135,#5137,.T.); +#5135 = VERTEX_POINT('',#5136); +#5136 = CARTESIAN_POINT('',(-2.28,0.75,0.98901)); +#5137 = LINE('',#5138,#5139); +#5138 = CARTESIAN_POINT('',(-2.5,0.75,0.98901)); +#5139 = VECTOR('',#5140,1.); +#5140 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5141 = ORIENTED_EDGE('',*,*,#5142,.F.); +#5142 = EDGE_CURVE('',#5143,#5135,#5145,.T.); +#5143 = VERTEX_POINT('',#5144); +#5144 = CARTESIAN_POINT('',(-2.28,0.75,0.2222)); +#5145 = LINE('',#5146,#5147); +#5146 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5147 = VECTOR('',#5148,1.); +#5148 = DIRECTION('',(0.,0.,1.)); +#5149 = ORIENTED_EDGE('',*,*,#5150,.T.); +#5150 = EDGE_CURVE('',#5143,#4906,#5151,.T.); +#5151 = LINE('',#5152,#5153); +#5152 = CARTESIAN_POINT('',(-2.28,0.75,0.2222)); +#5153 = VECTOR('',#5154,1.); +#5154 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5155 = ORIENTED_EDGE('',*,*,#4905,.F.); +#5156 = ORIENTED_EDGE('',*,*,#4881,.F.); +#5157 = ORIENTED_EDGE('',*,*,#5158,.F.); +#5158 = EDGE_CURVE('',#5159,#4874,#5161,.T.); +#5159 = VERTEX_POINT('',#5160); +#5160 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5161 = LINE('',#5162,#5163); +#5162 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5163 = VECTOR('',#5164,1.); +#5164 = DIRECTION('',(0.,0.,1.)); +#5165 = ORIENTED_EDGE('',*,*,#5166,.F.); +#5166 = EDGE_CURVE('',#5109,#5159,#5167,.T.); +#5167 = LINE('',#5168,#5169); +#5168 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5169 = VECTOR('',#5170,1.); +#5170 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5171 = PLANE('',#5172); +#5172 = AXIS2_PLACEMENT_3D('',#5173,#5174,#5175); +#5173 = CARTESIAN_POINT('',(-1.991067149606,0.75,0.303091083877)); +#5174 = DIRECTION('',(2.22044604925E-16,1.,-7.960022943413E-32)); +#5175 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5176 = ADVANCED_FACE('',(#5177),#5195,.T.); +#5177 = FACE_BOUND('',#5178,.T.); +#5178 = EDGE_LOOP('',(#5179,#5187,#5188,#5189)); +#5179 = ORIENTED_EDGE('',*,*,#5180,.F.); +#5180 = EDGE_CURVE('',#5159,#5181,#5183,.T.); +#5181 = VERTEX_POINT('',#5182); +#5182 = CARTESIAN_POINT('',(-1.14,-0.75,0.)); +#5183 = LINE('',#5184,#5185); +#5184 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5185 = VECTOR('',#5186,1.); +#5186 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5187 = ORIENTED_EDGE('',*,*,#5158,.T.); +#5188 = ORIENTED_EDGE('',*,*,#4873,.F.); +#5189 = ORIENTED_EDGE('',*,*,#5190,.F.); +#5190 = EDGE_CURVE('',#5181,#4866,#5191,.T.); +#5191 = LINE('',#5192,#5193); +#5192 = CARTESIAN_POINT('',(-1.14,-0.75,0.)); +#5193 = VECTOR('',#5194,1.); +#5194 = DIRECTION('',(0.,0.,1.)); +#5195 = PLANE('',#5196); +#5196 = AXIS2_PLACEMENT_3D('',#5197,#5198,#5199); +#5197 = CARTESIAN_POINT('',(-1.14,0.75,0.)); +#5198 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5199 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5200 = ADVANCED_FACE('',(#5201),#5262,.T.); +#5201 = FACE_BOUND('',#5202,.T.); +#5202 = EDGE_LOOP('',(#5203,#5213,#5222,#5228,#5229,#5230,#5231,#5239, + #5247,#5255)); +#5203 = ORIENTED_EDGE('',*,*,#5204,.F.); +#5204 = EDGE_CURVE('',#5205,#5207,#5209,.T.); +#5205 = VERTEX_POINT('',#5206); +#5206 = CARTESIAN_POINT('',(-2.5,-0.75,0.146666666667)); +#5207 = VERTEX_POINT('',#5208); +#5208 = CARTESIAN_POINT('',(-2.5,-0.75,0.842343333333)); +#5209 = LINE('',#5210,#5211); +#5210 = CARTESIAN_POINT('',(-2.5,-0.75,0.)); +#5211 = VECTOR('',#5212,1.); +#5212 = DIRECTION('',(0.,0.,1.)); +#5213 = ORIENTED_EDGE('',*,*,#5214,.T.); +#5214 = EDGE_CURVE('',#5205,#5215,#5217,.T.); +#5215 = VERTEX_POINT('',#5216); +#5216 = CARTESIAN_POINT('',(-2.353333333333,-0.75,-2.775557561563E-17)); +#5217 = CIRCLE('',#5218,0.146666666667); +#5218 = AXIS2_PLACEMENT_3D('',#5219,#5220,#5221); +#5219 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.146666666667)); +#5220 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5221 = DIRECTION('',(0.,0.,1.)); +#5222 = ORIENTED_EDGE('',*,*,#5223,.F.); +#5223 = EDGE_CURVE('',#5181,#5215,#5224,.T.); +#5224 = LINE('',#5225,#5226); +#5225 = CARTESIAN_POINT('',(-2.28,-0.75,0.)); +#5226 = VECTOR('',#5227,1.); +#5227 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5228 = ORIENTED_EDGE('',*,*,#5190,.T.); +#5229 = ORIENTED_EDGE('',*,*,#4865,.F.); +#5230 = ORIENTED_EDGE('',*,*,#4922,.T.); +#5231 = ORIENTED_EDGE('',*,*,#5232,.T.); +#5232 = EDGE_CURVE('',#4916,#5233,#5235,.T.); +#5233 = VERTEX_POINT('',#5234); +#5234 = CARTESIAN_POINT('',(-2.28,-0.75,0.2222)); +#5235 = LINE('',#5236,#5237); +#5236 = CARTESIAN_POINT('',(-1.14,-0.75,0.2222)); +#5237 = VECTOR('',#5238,1.); +#5238 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5239 = ORIENTED_EDGE('',*,*,#5240,.T.); +#5240 = EDGE_CURVE('',#5233,#5241,#5243,.T.); +#5241 = VERTEX_POINT('',#5242); +#5242 = CARTESIAN_POINT('',(-2.28,-0.75,0.98901)); +#5243 = LINE('',#5244,#5245); +#5244 = CARTESIAN_POINT('',(-2.28,-0.75,0.)); +#5245 = VECTOR('',#5246,1.); +#5246 = DIRECTION('',(0.,0.,1.)); +#5247 = ORIENTED_EDGE('',*,*,#5248,.T.); +#5248 = EDGE_CURVE('',#5241,#5249,#5251,.T.); +#5249 = VERTEX_POINT('',#5250); +#5250 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.98901)); +#5251 = LINE('',#5252,#5253); +#5252 = CARTESIAN_POINT('',(-2.28,-0.75,0.98901)); +#5253 = VECTOR('',#5254,1.); +#5254 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5255 = ORIENTED_EDGE('',*,*,#5256,.F.); +#5256 = EDGE_CURVE('',#5207,#5249,#5257,.T.); +#5257 = CIRCLE('',#5258,0.146666666667); +#5258 = AXIS2_PLACEMENT_3D('',#5259,#5260,#5261); +#5259 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.842343333333)); +#5260 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#5261 = DIRECTION('',(0.,0.,1.)); +#5262 = PLANE('',#5263); +#5263 = AXIS2_PLACEMENT_3D('',#5264,#5265,#5266); +#5264 = CARTESIAN_POINT('',(-1.991067149606,-0.75,0.303091083877)); +#5265 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#5266 = DIRECTION('',(0.,0.,-1.)); +#5267 = ADVANCED_FACE('',(#5268),#5274,.T.); +#5268 = FACE_BOUND('',#5269,.T.); +#5269 = EDGE_LOOP('',(#5270,#5271,#5272,#5273)); +#5270 = ORIENTED_EDGE('',*,*,#5091,.T.); +#5271 = ORIENTED_EDGE('',*,*,#4956,.T.); +#5272 = ORIENTED_EDGE('',*,*,#4850,.F.); +#5273 = ORIENTED_EDGE('',*,*,#5074,.F.); +#5274 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5275,#5276) + ,(#5277,#5278 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.590518689767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5275 = CARTESIAN_POINT('',(-1.1,1.279799853066,0.)); +#5276 = CARTESIAN_POINT('',(-1.1,1.295259344883,0.22)); +#5277 = CARTESIAN_POINT('',(-1.1,-1.279799853066,0.)); +#5278 = CARTESIAN_POINT('',(-1.1,-1.295259344883,0.22)); +#5279 = ADVANCED_FACE('',(#5280),#5286,.T.); +#5280 = FACE_BOUND('',#5281,.T.); +#5281 = EDGE_LOOP('',(#5282,#5283,#5284,#5285)); +#5282 = ORIENTED_EDGE('',*,*,#4932,.T.); +#5283 = ORIENTED_EDGE('',*,*,#4979,.T.); +#5284 = ORIENTED_EDGE('',*,*,#5017,.F.); +#5285 = ORIENTED_EDGE('',*,*,#4993,.F.); +#5286 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5287,#5288) + ,(#5289,#5290 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.7),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5287 = CARTESIAN_POINT('',(-2.28,1.35,0.999)); +#5288 = CARTESIAN_POINT('',(-2.194199820414,1.264199820414,2.22)); +#5289 = CARTESIAN_POINT('',(-2.28,-1.35,0.999)); +#5290 = CARTESIAN_POINT('',(-2.194199820414,-1.264199820414,2.22)); +#5291 = ADVANCED_FACE('',(#5292),#5303,.F.); +#5292 = FACE_BOUND('',#5293,.F.); +#5293 = EDGE_LOOP('',(#5294,#5295,#5296,#5302)); +#5294 = ORIENTED_EDGE('',*,*,#4915,.F.); +#5295 = ORIENTED_EDGE('',*,*,#5232,.T.); +#5296 = ORIENTED_EDGE('',*,*,#5297,.T.); +#5297 = EDGE_CURVE('',#5233,#5143,#5298,.T.); +#5298 = LINE('',#5299,#5300); +#5299 = CARTESIAN_POINT('',(-2.28,-0.75,0.2222)); +#5300 = VECTOR('',#5301,1.); +#5301 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5302 = ORIENTED_EDGE('',*,*,#5150,.T.); +#5303 = PLANE('',#5304); +#5304 = AXIS2_PLACEMENT_3D('',#5305,#5306,#5307); +#5305 = CARTESIAN_POINT('',(-1.71,4.440892098501E-16,0.2222)); +#5306 = DIRECTION('',(0.,-0.,-1.)); +#5307 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5308 = ADVANCED_FACE('',(#5309),#5332,.F.); +#5309 = FACE_BOUND('',#5310,.F.); +#5310 = EDGE_LOOP('',(#5311,#5321,#5326,#5327)); +#5311 = ORIENTED_EDGE('',*,*,#5312,.T.); +#5312 = EDGE_CURVE('',#5313,#5315,#5317,.T.); +#5313 = VERTEX_POINT('',#5314); +#5314 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5315 = VERTEX_POINT('',#5316); +#5316 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5317 = LINE('',#5318,#5319); +#5318 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5319 = VECTOR('',#5320,1.); +#5320 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5321 = ORIENTED_EDGE('',*,*,#5322,.T.); +#5322 = EDGE_CURVE('',#5315,#5029,#5323,.T.); +#5323 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5324,#5325),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5324 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5325 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5326 = ORIENTED_EDGE('',*,*,#5026,.F.); +#5327 = ORIENTED_EDGE('',*,*,#5328,.F.); +#5328 = EDGE_CURVE('',#5313,#5027,#5329,.T.); +#5329 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5330,#5331),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5330 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.2178)); +#5331 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5332 = PLANE('',#5333); +#5333 = AXIS2_PLACEMENT_3D('',#5334,#5335,#5336); +#5334 = CARTESIAN_POINT('',(-1.508399640828,1.178399640828,2.22)); +#5335 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5336 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5337 = ADVANCED_FACE('',(#5338),#5355,.F.); +#5338 = FACE_BOUND('',#5339,.F.); +#5339 = EDGE_LOOP('',(#5340,#5348,#5349,#5350)); +#5340 = ORIENTED_EDGE('',*,*,#5341,.T.); +#5341 = EDGE_CURVE('',#5342,#5313,#5344,.T.); +#5342 = VERTEX_POINT('',#5343); +#5343 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5344 = LINE('',#5345,#5346); +#5345 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5346 = VECTOR('',#5347,1.); +#5347 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5348 = ORIENTED_EDGE('',*,*,#5328,.T.); +#5349 = ORIENTED_EDGE('',*,*,#5052,.F.); +#5350 = ORIENTED_EDGE('',*,*,#5351,.F.); +#5351 = EDGE_CURVE('',#5342,#5045,#5352,.T.); +#5352 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5353,#5354),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5353 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5354 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5355 = PLANE('',#5356); +#5356 = AXIS2_PLACEMENT_3D('',#5357,#5358,#5359); +#5357 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.22)); +#5358 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5359 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5360 = ADVANCED_FACE('',(#5361),#5378,.F.); +#5361 = FACE_BOUND('',#5362,.F.); +#5362 = EDGE_LOOP('',(#5363,#5371,#5372,#5373)); +#5363 = ORIENTED_EDGE('',*,*,#5364,.T.); +#5364 = EDGE_CURVE('',#5365,#5342,#5367,.T.); +#5365 = VERTEX_POINT('',#5366); +#5366 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#5367 = LINE('',#5368,#5369); +#5368 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#5369 = VECTOR('',#5370,1.); +#5370 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5371 = ORIENTED_EDGE('',*,*,#5351,.T.); +#5372 = ORIENTED_EDGE('',*,*,#5044,.F.); +#5373 = ORIENTED_EDGE('',*,*,#5374,.F.); +#5374 = EDGE_CURVE('',#5365,#5037,#5375,.T.); +#5375 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5376,#5377),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5376 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.2178)); +#5377 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5378 = PLANE('',#5379); +#5379 = AXIS2_PLACEMENT_3D('',#5380,#5381,#5382); +#5380 = CARTESIAN_POINT('',(-2.108399640828,-1.178399640828,2.22)); +#5381 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5382 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5383 = ADVANCED_FACE('',(#5384),#5395,.F.); +#5384 = FACE_BOUND('',#5385,.F.); +#5385 = EDGE_LOOP('',(#5386,#5392,#5393,#5394)); +#5386 = ORIENTED_EDGE('',*,*,#5387,.T.); +#5387 = EDGE_CURVE('',#5315,#5365,#5388,.T.); +#5388 = LINE('',#5389,#5390); +#5389 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.2178)); +#5390 = VECTOR('',#5391,1.); +#5391 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5392 = ORIENTED_EDGE('',*,*,#5374,.T.); +#5393 = ORIENTED_EDGE('',*,*,#5036,.F.); +#5394 = ORIENTED_EDGE('',*,*,#5322,.F.); +#5395 = PLANE('',#5396); +#5396 = AXIS2_PLACEMENT_3D('',#5397,#5398,#5399); +#5397 = CARTESIAN_POINT('',(-2.108399640828,1.178399640828,2.22)); +#5398 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5399 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5400 = ADVANCED_FACE('',(#5401),#5417,.T.); +#5401 = FACE_BOUND('',#5402,.T.); +#5402 = EDGE_LOOP('',(#5403,#5409,#5410,#5416)); +#5403 = ORIENTED_EDGE('',*,*,#5404,.T.); +#5404 = EDGE_CURVE('',#5205,#5107,#5405,.T.); +#5405 = LINE('',#5406,#5407); +#5406 = CARTESIAN_POINT('',(-2.5,-0.75,0.146666666667)); +#5407 = VECTOR('',#5408,1.); +#5408 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5409 = ORIENTED_EDGE('',*,*,#5106,.T.); +#5410 = ORIENTED_EDGE('',*,*,#5411,.F.); +#5411 = EDGE_CURVE('',#5215,#5109,#5412,.T.); +#5412 = LINE('',#5413,#5414); +#5413 = CARTESIAN_POINT('',(-2.353333333333,-0.75,-2.775557561563E-17)); +#5414 = VECTOR('',#5415,1.); +#5415 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5416 = ORIENTED_EDGE('',*,*,#5214,.F.); +#5417 = CYLINDRICAL_SURFACE('',#5418,0.146666666667); +#5418 = AXIS2_PLACEMENT_3D('',#5419,#5420,#5421); +#5419 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.146666666667)); +#5420 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5421 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5422 = ADVANCED_FACE('',(#5423),#5429,.T.); +#5423 = FACE_BOUND('',#5424,.T.); +#5424 = EDGE_LOOP('',(#5425,#5426,#5427,#5428)); +#5425 = ORIENTED_EDGE('',*,*,#5223,.T.); +#5426 = ORIENTED_EDGE('',*,*,#5411,.T.); +#5427 = ORIENTED_EDGE('',*,*,#5166,.T.); +#5428 = ORIENTED_EDGE('',*,*,#5180,.T.); +#5429 = PLANE('',#5430); +#5430 = AXIS2_PLACEMENT_3D('',#5431,#5432,#5433); +#5431 = CARTESIAN_POINT('',(-1.746666666667,3.878379099357E-16, + -7.671995716851E-18)); +#5432 = DIRECTION('',(1.332277103521E-17,-2.579688262589E-33,-1.)); +#5433 = DIRECTION('',(1.,-2.22044604925E-16,1.332277103521E-17)); +#5434 = ADVANCED_FACE('',(#5435),#5446,.T.); +#5435 = FACE_BOUND('',#5436,.T.); +#5436 = EDGE_LOOP('',(#5437,#5438,#5439,#5445)); +#5437 = ORIENTED_EDGE('',*,*,#5297,.T.); +#5438 = ORIENTED_EDGE('',*,*,#5142,.T.); +#5439 = ORIENTED_EDGE('',*,*,#5440,.T.); +#5440 = EDGE_CURVE('',#5135,#5241,#5441,.T.); +#5441 = LINE('',#5442,#5443); +#5442 = CARTESIAN_POINT('',(-2.28,0.75,0.98901)); +#5443 = VECTOR('',#5444,1.); +#5444 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5445 = ORIENTED_EDGE('',*,*,#5240,.F.); +#5446 = PLANE('',#5447); +#5447 = AXIS2_PLACEMENT_3D('',#5448,#5449,#5450); +#5448 = CARTESIAN_POINT('',(-2.28,0.75,0.)); +#5449 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#5450 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5451 = ADVANCED_FACE('',(#5452),#5463,.F.); +#5452 = FACE_BOUND('',#5453,.F.); +#5453 = EDGE_LOOP('',(#5454,#5455,#5461,#5462)); +#5454 = ORIENTED_EDGE('',*,*,#5248,.T.); +#5455 = ORIENTED_EDGE('',*,*,#5456,.T.); +#5456 = EDGE_CURVE('',#5249,#5126,#5457,.T.); +#5457 = LINE('',#5458,#5459); +#5458 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.98901)); +#5459 = VECTOR('',#5460,1.); +#5460 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5461 = ORIENTED_EDGE('',*,*,#5134,.T.); +#5462 = ORIENTED_EDGE('',*,*,#5440,.T.); +#5463 = PLANE('',#5464); +#5464 = AXIS2_PLACEMENT_3D('',#5465,#5466,#5467); +#5465 = CARTESIAN_POINT('',(-2.39,4.440892098501E-16,0.98901)); +#5466 = DIRECTION('',(0.,-0.,-1.)); +#5467 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5468 = ADVANCED_FACE('',(#5469),#5480,.T.); +#5469 = FACE_BOUND('',#5470,.T.); +#5470 = EDGE_LOOP('',(#5471,#5472,#5473,#5474)); +#5471 = ORIENTED_EDGE('',*,*,#5256,.T.); +#5472 = ORIENTED_EDGE('',*,*,#5456,.T.); +#5473 = ORIENTED_EDGE('',*,*,#5125,.F.); +#5474 = ORIENTED_EDGE('',*,*,#5475,.F.); +#5475 = EDGE_CURVE('',#5207,#5118,#5476,.T.); +#5476 = LINE('',#5477,#5478); +#5477 = CARTESIAN_POINT('',(-2.5,-0.75,0.842343333333)); +#5478 = VECTOR('',#5479,1.); +#5479 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5480 = CYLINDRICAL_SURFACE('',#5481,0.146666666667); +#5481 = AXIS2_PLACEMENT_3D('',#5482,#5483,#5484); +#5482 = CARTESIAN_POINT('',(-2.353333333333,-0.75,0.842343333333)); +#5483 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5484 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5485 = ADVANCED_FACE('',(#5486),#5492,.T.); +#5486 = FACE_BOUND('',#5487,.T.); +#5487 = EDGE_LOOP('',(#5488,#5489,#5490,#5491)); +#5488 = ORIENTED_EDGE('',*,*,#5204,.T.); +#5489 = ORIENTED_EDGE('',*,*,#5475,.T.); +#5490 = ORIENTED_EDGE('',*,*,#5117,.F.); +#5491 = ORIENTED_EDGE('',*,*,#5404,.F.); +#5492 = PLANE('',#5493); +#5493 = AXIS2_PLACEMENT_3D('',#5494,#5495,#5496); +#5494 = CARTESIAN_POINT('',(-2.5,-0.75,0.)); +#5495 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#5496 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#5497 = ADVANCED_FACE('',(#5498),#5504,.F.); +#5498 = FACE_BOUND('',#5499,.T.); +#5499 = EDGE_LOOP('',(#5500,#5501,#5502,#5503)); +#5500 = ORIENTED_EDGE('',*,*,#5341,.T.); +#5501 = ORIENTED_EDGE('',*,*,#5312,.T.); +#5502 = ORIENTED_EDGE('',*,*,#5387,.T.); +#5503 = ORIENTED_EDGE('',*,*,#5364,.T.); +#5504 = PLANE('',#5505); +#5505 = AXIS2_PLACEMENT_3D('',#5506,#5507,#5508); +#5506 = CARTESIAN_POINT('',(-1.508399640828,-1.178399640828,2.2178)); +#5507 = DIRECTION('',(0.,0.,-1.)); +#5508 = DIRECTION('',(-0.246713052972,0.969088576701,0.)); +#5509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#5513)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#5510,#5511,#5512)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#5510 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#5511 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#5512 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#5513 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#5510, + 'distance_accuracy_value','confusion accuracy'); +#5514 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#5515,#5517); +#5515 = ( REPRESENTATION_RELATIONSHIP('','',#4300,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#5516) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#5516 = ITEM_DEFINED_TRANSFORMATION('','',#11,#75); +#5517 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #5518); +#5518 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('16','D1','',#5,#4295,$); +#5519 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#4297)); +#5520 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#5521,#5523); +#5521 = ( REPRESENTATION_RELATIONSHIP('','',#4300,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#5522) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#5522 = ITEM_DEFINED_TRANSFORMATION('','',#11,#79); +#5523 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #5524); +#5524 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('17','D2','',#5,#4295,$); +#5525 = SHAPE_DEFINITION_REPRESENTATION(#5526,#5532); +#5526 = PRODUCT_DEFINITION_SHAPE('','',#5527); +#5527 = PRODUCT_DEFINITION('design','',#5528,#5531); +#5528 = PRODUCT_DEFINITION_FORMATION('','',#5529); +#5529 = PRODUCT('D_SOD-123','D_SOD-123','',(#5530)); +#5530 = PRODUCT_CONTEXT('',#2,'mechanical'); +#5531 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#5532 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#5533),#7221); +#5533 = MANIFOLD_SOLID_BREP('',#5534); +#5534 = CLOSED_SHELL('',(#5535,#5589,#5652,#5675,#5705,#5738,#5768,#5791 + ,#5814,#5837,#5860,#5883,#5916,#5939,#5962,#6050,#6125,#6149,#6217, + #6305,#6321,#6337,#6353,#6369,#6386,#6419,#6436,#6458,#6489,#6512, + #6535,#6558,#6588,#6605,#6622,#6639,#6656,#6673,#6690,#6707,#6719, + #6742,#6765,#6782,#6857,#6881,#6949,#6966,#7016,#7033,#7050,#7067, + #7084,#7101,#7113,#7144,#7168,#7192,#7209)); +#5535 = ADVANCED_FACE('',(#5536),#5584,.F.); +#5536 = FACE_BOUND('',#5537,.F.); +#5537 = EDGE_LOOP('',(#5538,#5548,#5555,#5563,#5571,#5579)); +#5538 = ORIENTED_EDGE('',*,*,#5539,.T.); +#5539 = EDGE_CURVE('',#5540,#5542,#5544,.T.); +#5540 = VERTEX_POINT('',#5541); +#5541 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5542 = VERTEX_POINT('',#5543); +#5543 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5544 = LINE('',#5545,#5546); +#5545 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5546 = VECTOR('',#5547,1.); +#5547 = DIRECTION('',(0.,1.,0.)); +#5548 = ORIENTED_EDGE('',*,*,#5549,.T.); +#5549 = EDGE_CURVE('',#5542,#5550,#5552,.T.); +#5550 = VERTEX_POINT('',#5551); +#5551 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5552 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5553,#5554),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5553 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5554 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5555 = ORIENTED_EDGE('',*,*,#5556,.F.); +#5556 = EDGE_CURVE('',#5557,#5550,#5559,.T.); +#5557 = VERTEX_POINT('',#5558); +#5558 = CARTESIAN_POINT('',(-1.375,0.325,0.575)); +#5559 = LINE('',#5560,#5561); +#5560 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5561 = VECTOR('',#5562,1.); +#5562 = DIRECTION('',(0.,1.,0.)); +#5563 = ORIENTED_EDGE('',*,*,#5564,.F.); +#5564 = EDGE_CURVE('',#5565,#5557,#5567,.T.); +#5565 = VERTEX_POINT('',#5566); +#5566 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#5567 = LINE('',#5568,#5569); +#5568 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#5569 = VECTOR('',#5570,1.); +#5570 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5571 = ORIENTED_EDGE('',*,*,#5572,.F.); +#5572 = EDGE_CURVE('',#5573,#5565,#5575,.T.); +#5573 = VERTEX_POINT('',#5574); +#5574 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5575 = LINE('',#5576,#5577); +#5576 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5577 = VECTOR('',#5578,1.); +#5578 = DIRECTION('',(0.,1.,0.)); +#5579 = ORIENTED_EDGE('',*,*,#5580,.F.); +#5580 = EDGE_CURVE('',#5540,#5573,#5581,.T.); +#5581 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5582,#5583),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5582 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5583 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5584 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5585,#5586) + ,(#5587,#5588 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5585 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5586 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5587 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5588 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5589 = ADVANCED_FACE('',(#5590),#5647,.F.); +#5590 = FACE_BOUND('',#5591,.T.); +#5591 = EDGE_LOOP('',(#5592,#5593,#5601,#5609,#5617,#5625,#5633,#5641)); +#5592 = ORIENTED_EDGE('',*,*,#5539,.T.); +#5593 = ORIENTED_EDGE('',*,*,#5594,.T.); +#5594 = EDGE_CURVE('',#5542,#5595,#5597,.T.); +#5595 = VERTEX_POINT('',#5596); +#5596 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5597 = LINE('',#5598,#5599); +#5598 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5599 = VECTOR('',#5600,1.); +#5600 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5601 = ORIENTED_EDGE('',*,*,#5602,.T.); +#5602 = EDGE_CURVE('',#5595,#5603,#5605,.T.); +#5603 = VERTEX_POINT('',#5604); +#5604 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5605 = LINE('',#5606,#5607); +#5606 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5607 = VECTOR('',#5608,1.); +#5608 = DIRECTION('',(1.,0.,0.)); +#5609 = ORIENTED_EDGE('',*,*,#5610,.T.); +#5610 = EDGE_CURVE('',#5603,#5611,#5613,.T.); +#5611 = VERTEX_POINT('',#5612); +#5612 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5613 = LINE('',#5614,#5615); +#5614 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5615 = VECTOR('',#5616,1.); +#5616 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#5617 = ORIENTED_EDGE('',*,*,#5618,.T.); +#5618 = EDGE_CURVE('',#5611,#5619,#5621,.T.); +#5619 = VERTEX_POINT('',#5620); +#5620 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5621 = LINE('',#5622,#5623); +#5622 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5623 = VECTOR('',#5624,1.); +#5624 = DIRECTION('',(0.,-1.,0.)); +#5625 = ORIENTED_EDGE('',*,*,#5626,.T.); +#5626 = EDGE_CURVE('',#5619,#5627,#5629,.T.); +#5627 = VERTEX_POINT('',#5628); +#5628 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5629 = LINE('',#5630,#5631); +#5630 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5631 = VECTOR('',#5632,1.); +#5632 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#5633 = ORIENTED_EDGE('',*,*,#5634,.T.); +#5634 = EDGE_CURVE('',#5627,#5635,#5637,.T.); +#5635 = VERTEX_POINT('',#5636); +#5636 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5637 = LINE('',#5638,#5639); +#5638 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5639 = VECTOR('',#5640,1.); +#5640 = DIRECTION('',(-1.,0.,0.)); +#5641 = ORIENTED_EDGE('',*,*,#5642,.T.); +#5642 = EDGE_CURVE('',#5635,#5540,#5643,.T.); +#5643 = LINE('',#5644,#5645); +#5644 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5645 = VECTOR('',#5646,1.); +#5646 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5647 = PLANE('',#5648); +#5648 = AXIS2_PLACEMENT_3D('',#5649,#5650,#5651); +#5649 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5650 = DIRECTION('',(0.,0.,1.)); +#5651 = DIRECTION('',(0.889616464678,0.456708381546,-0.)); +#5652 = ADVANCED_FACE('',(#5653),#5670,.F.); +#5653 = FACE_BOUND('',#5654,.F.); +#5654 = EDGE_LOOP('',(#5655,#5656,#5663,#5669)); +#5655 = ORIENTED_EDGE('',*,*,#5594,.T.); +#5656 = ORIENTED_EDGE('',*,*,#5657,.T.); +#5657 = EDGE_CURVE('',#5595,#5658,#5660,.T.); +#5658 = VERTEX_POINT('',#5659); +#5659 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5660 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5661,#5662),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5661 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5662 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5663 = ORIENTED_EDGE('',*,*,#5664,.F.); +#5664 = EDGE_CURVE('',#5550,#5658,#5665,.T.); +#5665 = LINE('',#5666,#5667); +#5666 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5667 = VECTOR('',#5668,1.); +#5668 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5669 = ORIENTED_EDGE('',*,*,#5549,.F.); +#5670 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5671,#5672) + ,(#5673,#5674 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5671 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#5672 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5673 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5674 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5675 = ADVANCED_FACE('',(#5676),#5700,.F.); +#5676 = FACE_BOUND('',#5677,.F.); +#5677 = EDGE_LOOP('',(#5678,#5685,#5686,#5694)); +#5678 = ORIENTED_EDGE('',*,*,#5679,.F.); +#5679 = EDGE_CURVE('',#5573,#5680,#5682,.T.); +#5680 = VERTEX_POINT('',#5681); +#5681 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5682 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5683,#5684),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5683 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5684 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5685 = ORIENTED_EDGE('',*,*,#5572,.T.); +#5686 = ORIENTED_EDGE('',*,*,#5687,.T.); +#5687 = EDGE_CURVE('',#5565,#5688,#5690,.T.); +#5688 = VERTEX_POINT('',#5689); +#5689 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#5690 = LINE('',#5691,#5692); +#5691 = CARTESIAN_POINT('',(-1.375,-0.325,0.579830288983)); +#5692 = VECTOR('',#5693,1.); +#5693 = DIRECTION('',(0.,0.,1.)); +#5694 = ORIENTED_EDGE('',*,*,#5695,.F.); +#5695 = EDGE_CURVE('',#5680,#5688,#5696,.T.); +#5696 = LINE('',#5697,#5698); +#5697 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5698 = VECTOR('',#5699,1.); +#5699 = DIRECTION('',(0.,1.,0.)); +#5700 = PLANE('',#5701); +#5701 = AXIS2_PLACEMENT_3D('',#5702,#5703,#5704); +#5702 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5703 = DIRECTION('',(1.,0.,0.)); +#5704 = DIRECTION('',(-0.,1.,0.)); +#5705 = ADVANCED_FACE('',(#5706),#5733,.F.); +#5706 = FACE_BOUND('',#5707,.F.); +#5707 = EDGE_LOOP('',(#5708,#5709,#5718,#5726)); +#5708 = ORIENTED_EDGE('',*,*,#5564,.T.); +#5709 = ORIENTED_EDGE('',*,*,#5710,.T.); +#5710 = EDGE_CURVE('',#5557,#5711,#5713,.T.); +#5711 = VERTEX_POINT('',#5712); +#5712 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#5713 = CIRCLE('',#5714,0.12); +#5714 = AXIS2_PLACEMENT_3D('',#5715,#5716,#5717); +#5715 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#5716 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5717 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#5718 = ORIENTED_EDGE('',*,*,#5719,.F.); +#5719 = EDGE_CURVE('',#5720,#5711,#5722,.T.); +#5720 = VERTEX_POINT('',#5721); +#5721 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#5722 = LINE('',#5723,#5724); +#5723 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#5724 = VECTOR('',#5725,1.); +#5725 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5726 = ORIENTED_EDGE('',*,*,#5727,.F.); +#5727 = EDGE_CURVE('',#5565,#5720,#5728,.T.); +#5728 = CIRCLE('',#5729,0.12); +#5729 = AXIS2_PLACEMENT_3D('',#5730,#5731,#5732); +#5730 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#5731 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5732 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#5733 = CYLINDRICAL_SURFACE('',#5734,0.12); +#5734 = AXIS2_PLACEMENT_3D('',#5735,#5736,#5737); +#5735 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#5736 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5737 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#5738 = ADVANCED_FACE('',(#5739),#5763,.F.); +#5739 = FACE_BOUND('',#5740,.F.); +#5740 = EDGE_LOOP('',(#5741,#5749,#5750,#5757)); +#5741 = ORIENTED_EDGE('',*,*,#5742,.F.); +#5742 = EDGE_CURVE('',#5557,#5743,#5745,.T.); +#5743 = VERTEX_POINT('',#5744); +#5744 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#5745 = LINE('',#5746,#5747); +#5746 = CARTESIAN_POINT('',(-1.375,0.325,0.579830288983)); +#5747 = VECTOR('',#5748,1.); +#5748 = DIRECTION('',(0.,0.,1.)); +#5749 = ORIENTED_EDGE('',*,*,#5556,.T.); +#5750 = ORIENTED_EDGE('',*,*,#5751,.T.); +#5751 = EDGE_CURVE('',#5550,#5752,#5754,.T.); +#5752 = VERTEX_POINT('',#5753); +#5753 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#5754 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5755,#5756),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5755 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#5756 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#5757 = ORIENTED_EDGE('',*,*,#5758,.F.); +#5758 = EDGE_CURVE('',#5743,#5752,#5759,.T.); +#5759 = LINE('',#5760,#5761); +#5760 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5761 = VECTOR('',#5762,1.); +#5762 = DIRECTION('',(0.,1.,0.)); +#5763 = PLANE('',#5764); +#5764 = AXIS2_PLACEMENT_3D('',#5765,#5766,#5767); +#5765 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#5766 = DIRECTION('',(1.,0.,0.)); +#5767 = DIRECTION('',(-0.,1.,0.)); +#5768 = ADVANCED_FACE('',(#5769),#5786,.F.); +#5769 = FACE_BOUND('',#5770,.F.); +#5770 = EDGE_LOOP('',(#5771,#5772,#5773,#5781)); +#5771 = ORIENTED_EDGE('',*,*,#5642,.T.); +#5772 = ORIENTED_EDGE('',*,*,#5580,.T.); +#5773 = ORIENTED_EDGE('',*,*,#5774,.F.); +#5774 = EDGE_CURVE('',#5775,#5573,#5777,.T.); +#5775 = VERTEX_POINT('',#5776); +#5776 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5777 = LINE('',#5778,#5779); +#5778 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5779 = VECTOR('',#5780,1.); +#5780 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5781 = ORIENTED_EDGE('',*,*,#5782,.F.); +#5782 = EDGE_CURVE('',#5635,#5775,#5783,.T.); +#5783 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5784,#5785),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5784 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5785 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5786 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5787,#5788) + ,(#5789,#5790 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5787 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5788 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5789 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#5790 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#5791 = ADVANCED_FACE('',(#5792),#5809,.F.); +#5792 = FACE_BOUND('',#5793,.F.); +#5793 = EDGE_LOOP('',(#5794,#5795,#5796,#5804)); +#5794 = ORIENTED_EDGE('',*,*,#5634,.T.); +#5795 = ORIENTED_EDGE('',*,*,#5782,.T.); +#5796 = ORIENTED_EDGE('',*,*,#5797,.F.); +#5797 = EDGE_CURVE('',#5798,#5775,#5800,.T.); +#5798 = VERTEX_POINT('',#5799); +#5799 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5800 = LINE('',#5801,#5802); +#5801 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5802 = VECTOR('',#5803,1.); +#5803 = DIRECTION('',(-1.,0.,0.)); +#5804 = ORIENTED_EDGE('',*,*,#5805,.F.); +#5805 = EDGE_CURVE('',#5627,#5798,#5806,.T.); +#5806 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5807,#5808),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5807 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5808 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5809 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5810,#5811) + ,(#5812,#5813 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5810 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5811 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5812 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#5813 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5814 = ADVANCED_FACE('',(#5815),#5832,.F.); +#5815 = FACE_BOUND('',#5816,.F.); +#5816 = EDGE_LOOP('',(#5817,#5818,#5825,#5831)); +#5817 = ORIENTED_EDGE('',*,*,#5602,.T.); +#5818 = ORIENTED_EDGE('',*,*,#5819,.T.); +#5819 = EDGE_CURVE('',#5603,#5820,#5822,.T.); +#5820 = VERTEX_POINT('',#5821); +#5821 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5822 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5823,#5824),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5823 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5824 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5825 = ORIENTED_EDGE('',*,*,#5826,.F.); +#5826 = EDGE_CURVE('',#5658,#5820,#5827,.T.); +#5827 = LINE('',#5828,#5829); +#5828 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5829 = VECTOR('',#5830,1.); +#5830 = DIRECTION('',(1.,0.,0.)); +#5831 = ORIENTED_EDGE('',*,*,#5657,.F.); +#5832 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5833,#5834) + ,(#5835,#5836 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5833 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#5834 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5835 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5836 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5837 = ADVANCED_FACE('',(#5838),#5855,.F.); +#5838 = FACE_BOUND('',#5839,.F.); +#5839 = EDGE_LOOP('',(#5840,#5841,#5842,#5850)); +#5840 = ORIENTED_EDGE('',*,*,#5626,.T.); +#5841 = ORIENTED_EDGE('',*,*,#5805,.T.); +#5842 = ORIENTED_EDGE('',*,*,#5843,.F.); +#5843 = EDGE_CURVE('',#5844,#5798,#5846,.T.); +#5844 = VERTEX_POINT('',#5845); +#5845 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5846 = LINE('',#5847,#5848); +#5847 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5848 = VECTOR('',#5849,1.); +#5849 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#5850 = ORIENTED_EDGE('',*,*,#5851,.F.); +#5851 = EDGE_CURVE('',#5619,#5844,#5852,.T.); +#5852 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5853,#5854),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5853 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5854 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5855 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5856,#5857) + ,(#5858,#5859 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5856 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5857 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5858 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#5859 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#5860 = ADVANCED_FACE('',(#5861),#5878,.F.); +#5861 = FACE_BOUND('',#5862,.F.); +#5862 = EDGE_LOOP('',(#5863,#5864,#5871,#5877)); +#5863 = ORIENTED_EDGE('',*,*,#5610,.T.); +#5864 = ORIENTED_EDGE('',*,*,#5865,.T.); +#5865 = EDGE_CURVE('',#5611,#5866,#5868,.T.); +#5866 = VERTEX_POINT('',#5867); +#5867 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5868 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5869,#5870),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5869 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5870 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5871 = ORIENTED_EDGE('',*,*,#5872,.F.); +#5872 = EDGE_CURVE('',#5820,#5866,#5873,.T.); +#5873 = LINE('',#5874,#5875); +#5874 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5875 = VECTOR('',#5876,1.); +#5876 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#5877 = ORIENTED_EDGE('',*,*,#5819,.F.); +#5878 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5879,#5880) + ,(#5881,#5882 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5879 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#5880 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#5881 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5882 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5883 = ADVANCED_FACE('',(#5884),#5911,.F.); +#5884 = FACE_BOUND('',#5885,.F.); +#5885 = EDGE_LOOP('',(#5886,#5887,#5888,#5896,#5904,#5910)); +#5886 = ORIENTED_EDGE('',*,*,#5618,.T.); +#5887 = ORIENTED_EDGE('',*,*,#5851,.T.); +#5888 = ORIENTED_EDGE('',*,*,#5889,.F.); +#5889 = EDGE_CURVE('',#5890,#5844,#5892,.T.); +#5890 = VERTEX_POINT('',#5891); +#5891 = CARTESIAN_POINT('',(1.375,-0.325,0.575)); +#5892 = LINE('',#5893,#5894); +#5893 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5894 = VECTOR('',#5895,1.); +#5895 = DIRECTION('',(0.,-1.,0.)); +#5896 = ORIENTED_EDGE('',*,*,#5897,.F.); +#5897 = EDGE_CURVE('',#5898,#5890,#5900,.T.); +#5898 = VERTEX_POINT('',#5899); +#5899 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#5900 = LINE('',#5901,#5902); +#5901 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#5902 = VECTOR('',#5903,1.); +#5903 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#5904 = ORIENTED_EDGE('',*,*,#5905,.F.); +#5905 = EDGE_CURVE('',#5866,#5898,#5906,.T.); +#5906 = LINE('',#5907,#5908); +#5907 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5908 = VECTOR('',#5909,1.); +#5909 = DIRECTION('',(0.,-1.,0.)); +#5910 = ORIENTED_EDGE('',*,*,#5865,.F.); +#5911 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5912,#5913) + ,(#5914,#5915 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5912 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#5913 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#5914 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#5915 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#5916 = ADVANCED_FACE('',(#5917),#5934,.F.); +#5917 = FACE_BOUND('',#5918,.F.); +#5918 = EDGE_LOOP('',(#5919,#5920,#5927,#5933)); +#5919 = ORIENTED_EDGE('',*,*,#5664,.T.); +#5920 = ORIENTED_EDGE('',*,*,#5921,.T.); +#5921 = EDGE_CURVE('',#5658,#5922,#5924,.T.); +#5922 = VERTEX_POINT('',#5923); +#5923 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#5924 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5925,#5926),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5925 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#5926 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#5927 = ORIENTED_EDGE('',*,*,#5928,.F.); +#5928 = EDGE_CURVE('',#5752,#5922,#5929,.T.); +#5929 = LINE('',#5930,#5931); +#5930 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#5931 = VECTOR('',#5932,1.); +#5932 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5933 = ORIENTED_EDGE('',*,*,#5751,.F.); +#5934 = PLANE('',#5935); +#5935 = AXIS2_PLACEMENT_3D('',#5936,#5937,#5938); +#5936 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#5937 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#5938 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5939 = ADVANCED_FACE('',(#5940),#5957,.F.); +#5940 = FACE_BOUND('',#5941,.F.); +#5941 = EDGE_LOOP('',(#5942,#5943,#5944,#5952)); +#5942 = ORIENTED_EDGE('',*,*,#5774,.T.); +#5943 = ORIENTED_EDGE('',*,*,#5679,.T.); +#5944 = ORIENTED_EDGE('',*,*,#5945,.F.); +#5945 = EDGE_CURVE('',#5946,#5680,#5948,.T.); +#5946 = VERTEX_POINT('',#5947); +#5947 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#5948 = LINE('',#5949,#5950); +#5949 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#5950 = VECTOR('',#5951,1.); +#5951 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5952 = ORIENTED_EDGE('',*,*,#5953,.F.); +#5953 = EDGE_CURVE('',#5775,#5946,#5954,.T.); +#5954 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5955,#5956),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5955 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#5956 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#5957 = PLANE('',#5958); +#5958 = AXIS2_PLACEMENT_3D('',#5959,#5960,#5961); +#5959 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#5960 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#5961 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5962 = ADVANCED_FACE('',(#5963),#6045,.F.); +#5963 = FACE_BOUND('',#5964,.F.); +#5964 = EDGE_LOOP('',(#5965,#5966,#5967,#5975,#5983,#5991,#5999,#6007, + #6015,#6023,#6031,#6039)); +#5965 = ORIENTED_EDGE('',*,*,#5945,.T.); +#5966 = ORIENTED_EDGE('',*,*,#5695,.T.); +#5967 = ORIENTED_EDGE('',*,*,#5968,.T.); +#5968 = EDGE_CURVE('',#5688,#5969,#5971,.T.); +#5969 = VERTEX_POINT('',#5970); +#5970 = CARTESIAN_POINT('',(-1.35,-0.325,0.775)); +#5971 = LINE('',#5972,#5973); +#5972 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#5973 = VECTOR('',#5974,1.); +#5974 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5975 = ORIENTED_EDGE('',*,*,#5976,.F.); +#5976 = EDGE_CURVE('',#5977,#5969,#5979,.T.); +#5977 = VERTEX_POINT('',#5978); +#5978 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#5979 = LINE('',#5980,#5981); +#5980 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#5981 = VECTOR('',#5982,1.); +#5982 = DIRECTION('',(0.,1.,0.)); +#5983 = ORIENTED_EDGE('',*,*,#5984,.F.); +#5984 = EDGE_CURVE('',#5985,#5977,#5987,.T.); +#5985 = VERTEX_POINT('',#5986); +#5986 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#5987 = LINE('',#5988,#5989); +#5988 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#5989 = VECTOR('',#5990,1.); +#5990 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#5991 = ORIENTED_EDGE('',*,*,#5992,.F.); +#5992 = EDGE_CURVE('',#5993,#5985,#5995,.T.); +#5993 = VERTEX_POINT('',#5994); +#5994 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#5995 = LINE('',#5996,#5997); +#5996 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#5997 = VECTOR('',#5998,1.); +#5998 = DIRECTION('',(-1.,0.,0.)); +#5999 = ORIENTED_EDGE('',*,*,#6000,.F.); +#6000 = EDGE_CURVE('',#6001,#5993,#6003,.T.); +#6001 = VERTEX_POINT('',#6002); +#6002 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#6003 = LINE('',#6004,#6005); +#6004 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#6005 = VECTOR('',#6006,1.); +#6006 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6007 = ORIENTED_EDGE('',*,*,#6008,.F.); +#6008 = EDGE_CURVE('',#6009,#6001,#6011,.T.); +#6009 = VERTEX_POINT('',#6010); +#6010 = CARTESIAN_POINT('',(1.35,-0.325,0.775)); +#6011 = LINE('',#6012,#6013); +#6012 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6013 = VECTOR('',#6014,1.); +#6014 = DIRECTION('',(0.,-1.,0.)); +#6015 = ORIENTED_EDGE('',*,*,#6016,.F.); +#6016 = EDGE_CURVE('',#6017,#6009,#6019,.T.); +#6017 = VERTEX_POINT('',#6018); +#6018 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#6019 = LINE('',#6020,#6021); +#6020 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#6021 = VECTOR('',#6022,1.); +#6022 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6023 = ORIENTED_EDGE('',*,*,#6024,.T.); +#6024 = EDGE_CURVE('',#6017,#6025,#6027,.T.); +#6025 = VERTEX_POINT('',#6026); +#6026 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#6027 = LINE('',#6028,#6029); +#6028 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6029 = VECTOR('',#6030,1.); +#6030 = DIRECTION('',(0.,-1.,0.)); +#6031 = ORIENTED_EDGE('',*,*,#6032,.T.); +#6032 = EDGE_CURVE('',#6025,#6033,#6035,.T.); +#6033 = VERTEX_POINT('',#6034); +#6034 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#6035 = LINE('',#6036,#6037); +#6036 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#6037 = VECTOR('',#6038,1.); +#6038 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6039 = ORIENTED_EDGE('',*,*,#6040,.T.); +#6040 = EDGE_CURVE('',#6033,#5946,#6041,.T.); +#6041 = LINE('',#6042,#6043); +#6042 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#6043 = VECTOR('',#6044,1.); +#6044 = DIRECTION('',(-1.,0.,0.)); +#6045 = PLANE('',#6046); +#6046 = AXIS2_PLACEMENT_3D('',#6047,#6048,#6049); +#6047 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#6048 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#6049 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#6050 = ADVANCED_FACE('',(#6051),#6120,.F.); +#6051 = FACE_BOUND('',#6052,.F.); +#6052 = EDGE_LOOP('',(#6053,#6054,#6055,#6063,#6072,#6080,#6088,#6096, + #6105,#6113)); +#6053 = ORIENTED_EDGE('',*,*,#5687,.F.); +#6054 = ORIENTED_EDGE('',*,*,#5727,.T.); +#6055 = ORIENTED_EDGE('',*,*,#6056,.T.); +#6056 = EDGE_CURVE('',#5720,#6057,#6059,.T.); +#6057 = VERTEX_POINT('',#6058); +#6058 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#6059 = LINE('',#6060,#6061); +#6060 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#6061 = VECTOR('',#6062,1.); +#6062 = DIRECTION('',(-0.142742572604,1.584760906992E-17,-0.989759848633 + )); +#6063 = ORIENTED_EDGE('',*,*,#6064,.T.); +#6064 = EDGE_CURVE('',#6057,#6065,#6067,.T.); +#6065 = VERTEX_POINT('',#6066); +#6066 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17) + ); +#6067 = CIRCLE('',#6068,0.32); +#6068 = AXIS2_PLACEMENT_3D('',#6069,#6070,#6071); +#6069 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#6070 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6071 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#6072 = ORIENTED_EDGE('',*,*,#6073,.T.); +#6073 = EDGE_CURVE('',#6065,#6074,#6076,.T.); +#6074 = VERTEX_POINT('',#6075); +#6075 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#6076 = LINE('',#6077,#6078); +#6077 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17) + ); +#6078 = VECTOR('',#6079,1.); +#6079 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6080 = ORIENTED_EDGE('',*,*,#6081,.T.); +#6081 = EDGE_CURVE('',#6074,#6082,#6084,.T.); +#6082 = VERTEX_POINT('',#6083); +#6083 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#6084 = LINE('',#6085,#6086); +#6085 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#6086 = VECTOR('',#6087,1.); +#6087 = DIRECTION('',(0.,0.,1.)); +#6088 = ORIENTED_EDGE('',*,*,#6089,.T.); +#6089 = EDGE_CURVE('',#6082,#6090,#6092,.T.); +#6090 = VERTEX_POINT('',#6091); +#6091 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#6092 = LINE('',#6093,#6094); +#6093 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#6094 = VECTOR('',#6095,1.); +#6095 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6096 = ORIENTED_EDGE('',*,*,#6097,.T.); +#6097 = EDGE_CURVE('',#6090,#6098,#6100,.T.); +#6098 = VERTEX_POINT('',#6099); +#6099 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#6100 = CIRCLE('',#6101,0.12); +#6101 = AXIS2_PLACEMENT_3D('',#6102,#6103,#6104); +#6102 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#6103 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6104 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#6105 = ORIENTED_EDGE('',*,*,#6106,.T.); +#6106 = EDGE_CURVE('',#6098,#6107,#6109,.T.); +#6107 = VERTEX_POINT('',#6108); +#6108 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#6109 = LINE('',#6110,#6111); +#6110 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#6111 = VECTOR('',#6112,1.); +#6112 = DIRECTION('',(0.142742572604,-1.584760906992E-17,0.989759848633) + ); +#6113 = ORIENTED_EDGE('',*,*,#6114,.T.); +#6114 = EDGE_CURVE('',#6107,#5688,#6115,.T.); +#6115 = CIRCLE('',#6116,0.32); +#6116 = AXIS2_PLACEMENT_3D('',#6117,#6118,#6119); +#6117 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#6118 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6119 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#6120 = PLANE('',#6121); +#6121 = AXIS2_PLACEMENT_3D('',#6122,#6123,#6124); +#6122 = CARTESIAN_POINT('',(-1.610729118287,-0.325,0.384660577966)); +#6123 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6124 = DIRECTION('',(0.,-0.,1.)); +#6125 = ADVANCED_FACE('',(#6126),#6144,.F.); +#6126 = FACE_BOUND('',#6127,.F.); +#6127 = EDGE_LOOP('',(#6128,#6129,#6137,#6143)); +#6128 = ORIENTED_EDGE('',*,*,#5719,.T.); +#6129 = ORIENTED_EDGE('',*,*,#6130,.T.); +#6130 = EDGE_CURVE('',#5711,#6131,#6133,.T.); +#6131 = VERTEX_POINT('',#6132); +#6132 = CARTESIAN_POINT('',(-1.523665661432,0.325,0.264432583147)); +#6133 = LINE('',#6134,#6135); +#6134 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#6135 = VECTOR('',#6136,1.); +#6136 = DIRECTION('',(-0.142742572604,1.584760906992E-17,-0.989759848633 + )); +#6137 = ORIENTED_EDGE('',*,*,#6138,.F.); +#6138 = EDGE_CURVE('',#6057,#6131,#6139,.T.); +#6139 = LINE('',#6140,#6141); +#6140 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#6141 = VECTOR('',#6142,1.); +#6142 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6143 = ORIENTED_EDGE('',*,*,#6056,.F.); +#6144 = PLANE('',#6145); +#6145 = AXIS2_PLACEMENT_3D('',#6146,#6147,#6148); +#6146 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#6147 = DIRECTION('',(-0.989759848633,1.098854172802E-16,0.142742572604) + ); +#6148 = DIRECTION('',(-0.142742572604,1.584760906992E-17,-0.989759848633 + )); +#6149 = ADVANCED_FACE('',(#6150),#6212,.T.); +#6150 = FACE_BOUND('',#6151,.T.); +#6151 = EDGE_LOOP('',(#6152,#6153,#6154,#6155,#6164,#6172,#6180,#6188, + #6197,#6205)); +#6152 = ORIENTED_EDGE('',*,*,#5742,.F.); +#6153 = ORIENTED_EDGE('',*,*,#5710,.T.); +#6154 = ORIENTED_EDGE('',*,*,#6130,.T.); +#6155 = ORIENTED_EDGE('',*,*,#6156,.T.); +#6156 = EDGE_CURVE('',#6131,#6157,#6159,.T.); +#6157 = VERTEX_POINT('',#6158); +#6158 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17)); +#6159 = CIRCLE('',#6160,0.32); +#6160 = AXIS2_PLACEMENT_3D('',#6161,#6162,#6163); +#6161 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#6162 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6163 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#6164 = ORIENTED_EDGE('',*,*,#6165,.T.); +#6165 = EDGE_CURVE('',#6157,#6166,#6168,.T.); +#6166 = VERTEX_POINT('',#6167); +#6167 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#6168 = LINE('',#6169,#6170); +#6169 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17)); +#6170 = VECTOR('',#6171,1.); +#6171 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6172 = ORIENTED_EDGE('',*,*,#6173,.T.); +#6173 = EDGE_CURVE('',#6166,#6174,#6176,.T.); +#6174 = VERTEX_POINT('',#6175); +#6175 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#6176 = LINE('',#6177,#6178); +#6177 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#6178 = VECTOR('',#6179,1.); +#6179 = DIRECTION('',(0.,0.,1.)); +#6180 = ORIENTED_EDGE('',*,*,#6181,.T.); +#6181 = EDGE_CURVE('',#6174,#6182,#6184,.T.); +#6182 = VERTEX_POINT('',#6183); +#6183 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.2)); +#6184 = LINE('',#6185,#6186); +#6185 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#6186 = VECTOR('',#6187,1.); +#6187 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6188 = ORIENTED_EDGE('',*,*,#6189,.T.); +#6189 = EDGE_CURVE('',#6182,#6190,#6192,.T.); +#6190 = VERTEX_POINT('',#6191); +#6191 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#6192 = CIRCLE('',#6193,0.12); +#6193 = AXIS2_PLACEMENT_3D('',#6194,#6195,#6196); +#6194 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#6195 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6196 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#6197 = ORIENTED_EDGE('',*,*,#6198,.T.); +#6198 = EDGE_CURVE('',#6190,#6199,#6201,.T.); +#6199 = VERTEX_POINT('',#6200); +#6200 = CARTESIAN_POINT('',(-1.690138480964,0.325,0.510567416853)); +#6201 = LINE('',#6202,#6203); +#6202 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#6203 = VECTOR('',#6204,1.); +#6204 = DIRECTION('',(0.142742572604,-1.584760906992E-17,0.989759848633) + ); +#6205 = ORIENTED_EDGE('',*,*,#6206,.T.); +#6206 = EDGE_CURVE('',#6199,#5743,#6207,.T.); +#6207 = CIRCLE('',#6208,0.32); +#6208 = AXIS2_PLACEMENT_3D('',#6209,#6210,#6211); +#6209 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#6210 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6211 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#6212 = PLANE('',#6213); +#6213 = AXIS2_PLACEMENT_3D('',#6214,#6215,#6216); +#6214 = CARTESIAN_POINT('',(-1.610729118287,0.325,0.384660577966)); +#6215 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6216 = DIRECTION('',(0.,-0.,1.)); +#6217 = ADVANCED_FACE('',(#6218),#6300,.F.); +#6218 = FACE_BOUND('',#6219,.F.); +#6219 = EDGE_LOOP('',(#6220,#6228,#6229,#6230,#6238,#6246,#6254,#6262, + #6270,#6278,#6286,#6294)); +#6220 = ORIENTED_EDGE('',*,*,#6221,.F.); +#6221 = EDGE_CURVE('',#5743,#6222,#6224,.T.); +#6222 = VERTEX_POINT('',#6223); +#6223 = CARTESIAN_POINT('',(-1.35,0.325,0.775)); +#6224 = LINE('',#6225,#6226); +#6225 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#6226 = VECTOR('',#6227,1.); +#6227 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6228 = ORIENTED_EDGE('',*,*,#5758,.T.); +#6229 = ORIENTED_EDGE('',*,*,#5928,.T.); +#6230 = ORIENTED_EDGE('',*,*,#6231,.T.); +#6231 = EDGE_CURVE('',#5922,#6232,#6234,.T.); +#6232 = VERTEX_POINT('',#6233); +#6233 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#6234 = LINE('',#6235,#6236); +#6235 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#6236 = VECTOR('',#6237,1.); +#6237 = DIRECTION('',(1.,0.,0.)); +#6238 = ORIENTED_EDGE('',*,*,#6239,.T.); +#6239 = EDGE_CURVE('',#6232,#6240,#6242,.T.); +#6240 = VERTEX_POINT('',#6241); +#6241 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6242 = LINE('',#6243,#6244); +#6243 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#6244 = VECTOR('',#6245,1.); +#6245 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6246 = ORIENTED_EDGE('',*,*,#6247,.T.); +#6247 = EDGE_CURVE('',#6240,#6248,#6250,.T.); +#6248 = VERTEX_POINT('',#6249); +#6249 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#6250 = LINE('',#6251,#6252); +#6251 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6252 = VECTOR('',#6253,1.); +#6253 = DIRECTION('',(0.,-1.,0.)); +#6254 = ORIENTED_EDGE('',*,*,#6255,.T.); +#6255 = EDGE_CURVE('',#6248,#6256,#6258,.T.); +#6256 = VERTEX_POINT('',#6257); +#6257 = CARTESIAN_POINT('',(1.35,0.325,0.775)); +#6258 = LINE('',#6259,#6260); +#6259 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#6260 = VECTOR('',#6261,1.); +#6261 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6262 = ORIENTED_EDGE('',*,*,#6263,.F.); +#6263 = EDGE_CURVE('',#6264,#6256,#6266,.T.); +#6264 = VERTEX_POINT('',#6265); +#6265 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6266 = LINE('',#6267,#6268); +#6267 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6268 = VECTOR('',#6269,1.); +#6269 = DIRECTION('',(0.,-1.,0.)); +#6270 = ORIENTED_EDGE('',*,*,#6271,.F.); +#6271 = EDGE_CURVE('',#6272,#6264,#6274,.T.); +#6272 = VERTEX_POINT('',#6273); +#6273 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6274 = LINE('',#6275,#6276); +#6275 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6276 = VECTOR('',#6277,1.); +#6277 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6278 = ORIENTED_EDGE('',*,*,#6279,.F.); +#6279 = EDGE_CURVE('',#6280,#6272,#6282,.T.); +#6280 = VERTEX_POINT('',#6281); +#6281 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6282 = LINE('',#6283,#6284); +#6283 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6284 = VECTOR('',#6285,1.); +#6285 = DIRECTION('',(1.,0.,0.)); +#6286 = ORIENTED_EDGE('',*,*,#6287,.F.); +#6287 = EDGE_CURVE('',#6288,#6280,#6290,.T.); +#6288 = VERTEX_POINT('',#6289); +#6289 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6290 = LINE('',#6291,#6292); +#6291 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6292 = VECTOR('',#6293,1.); +#6293 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#6294 = ORIENTED_EDGE('',*,*,#6295,.F.); +#6295 = EDGE_CURVE('',#6222,#6288,#6296,.T.); +#6296 = LINE('',#6297,#6298); +#6297 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6298 = VECTOR('',#6299,1.); +#6299 = DIRECTION('',(0.,1.,0.)); +#6300 = PLANE('',#6301); +#6301 = AXIS2_PLACEMENT_3D('',#6302,#6303,#6304); +#6302 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#6303 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#6304 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#6305 = ADVANCED_FACE('',(#6306),#6316,.F.); +#6306 = FACE_BOUND('',#6307,.F.); +#6307 = EDGE_LOOP('',(#6308,#6309,#6310,#6311)); +#6308 = ORIENTED_EDGE('',*,*,#5797,.T.); +#6309 = ORIENTED_EDGE('',*,*,#5953,.T.); +#6310 = ORIENTED_EDGE('',*,*,#6040,.F.); +#6311 = ORIENTED_EDGE('',*,*,#6312,.F.); +#6312 = EDGE_CURVE('',#5798,#6033,#6313,.T.); +#6313 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6314,#6315),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6314 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#6315 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#6316 = PLANE('',#6317); +#6317 = AXIS2_PLACEMENT_3D('',#6318,#6319,#6320); +#6318 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#6319 = DIRECTION('',(0.,1.,0.)); +#6320 = DIRECTION('',(-1.,0.,0.)); +#6321 = ADVANCED_FACE('',(#6322),#6332,.F.); +#6322 = FACE_BOUND('',#6323,.F.); +#6323 = EDGE_LOOP('',(#6324,#6325,#6330,#6331)); +#6324 = ORIENTED_EDGE('',*,*,#5826,.T.); +#6325 = ORIENTED_EDGE('',*,*,#6326,.T.); +#6326 = EDGE_CURVE('',#5820,#6232,#6327,.T.); +#6327 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6328,#6329),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6328 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#6329 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#6330 = ORIENTED_EDGE('',*,*,#6231,.F.); +#6331 = ORIENTED_EDGE('',*,*,#5921,.F.); +#6332 = PLANE('',#6333); +#6333 = AXIS2_PLACEMENT_3D('',#6334,#6335,#6336); +#6334 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#6335 = DIRECTION('',(0.,-1.,0.)); +#6336 = DIRECTION('',(1.,0.,0.)); +#6337 = ADVANCED_FACE('',(#6338),#6348,.F.); +#6338 = FACE_BOUND('',#6339,.F.); +#6339 = EDGE_LOOP('',(#6340,#6341,#6342,#6343)); +#6340 = ORIENTED_EDGE('',*,*,#5843,.T.); +#6341 = ORIENTED_EDGE('',*,*,#6312,.T.); +#6342 = ORIENTED_EDGE('',*,*,#6032,.F.); +#6343 = ORIENTED_EDGE('',*,*,#6344,.F.); +#6344 = EDGE_CURVE('',#5844,#6025,#6345,.T.); +#6345 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6346,#6347),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6346 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#6347 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#6348 = PLANE('',#6349); +#6349 = AXIS2_PLACEMENT_3D('',#6350,#6351,#6352); +#6350 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#6351 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#6352 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6353 = ADVANCED_FACE('',(#6354),#6364,.F.); +#6354 = FACE_BOUND('',#6355,.F.); +#6355 = EDGE_LOOP('',(#6356,#6357,#6362,#6363)); +#6356 = ORIENTED_EDGE('',*,*,#5872,.T.); +#6357 = ORIENTED_EDGE('',*,*,#6358,.T.); +#6358 = EDGE_CURVE('',#5866,#6240,#6359,.T.); +#6359 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6360,#6361),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6360 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#6361 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6362 = ORIENTED_EDGE('',*,*,#6239,.F.); +#6363 = ORIENTED_EDGE('',*,*,#6326,.F.); +#6364 = PLANE('',#6365); +#6365 = AXIS2_PLACEMENT_3D('',#6366,#6367,#6368); +#6366 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#6367 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6368 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6369 = ADVANCED_FACE('',(#6370),#6381,.F.); +#6370 = FACE_BOUND('',#6371,.F.); +#6371 = EDGE_LOOP('',(#6372,#6373,#6374,#6380)); +#6372 = ORIENTED_EDGE('',*,*,#6358,.F.); +#6373 = ORIENTED_EDGE('',*,*,#5905,.T.); +#6374 = ORIENTED_EDGE('',*,*,#6375,.T.); +#6375 = EDGE_CURVE('',#5898,#6248,#6376,.T.); +#6376 = LINE('',#6377,#6378); +#6377 = CARTESIAN_POINT('',(1.375,0.325,0.579830288983)); +#6378 = VECTOR('',#6379,1.); +#6379 = DIRECTION('',(0.,0.,1.)); +#6380 = ORIENTED_EDGE('',*,*,#6247,.F.); +#6381 = PLANE('',#6382); +#6382 = AXIS2_PLACEMENT_3D('',#6383,#6384,#6385); +#6383 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6384 = DIRECTION('',(-1.,0.,0.)); +#6385 = DIRECTION('',(0.,-1.,0.)); +#6386 = ADVANCED_FACE('',(#6387),#6414,.F.); +#6387 = FACE_BOUND('',#6388,.F.); +#6388 = EDGE_LOOP('',(#6389,#6390,#6399,#6407)); +#6389 = ORIENTED_EDGE('',*,*,#5897,.T.); +#6390 = ORIENTED_EDGE('',*,*,#6391,.T.); +#6391 = EDGE_CURVE('',#5890,#6392,#6394,.T.); +#6392 = VERTEX_POINT('',#6393); +#6393 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#6394 = CIRCLE('',#6395,0.12); +#6395 = AXIS2_PLACEMENT_3D('',#6396,#6397,#6398); +#6396 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#6397 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6398 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#6399 = ORIENTED_EDGE('',*,*,#6400,.F.); +#6400 = EDGE_CURVE('',#6401,#6392,#6403,.T.); +#6401 = VERTEX_POINT('',#6402); +#6402 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#6403 = LINE('',#6404,#6405); +#6404 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#6405 = VECTOR('',#6406,1.); +#6406 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6407 = ORIENTED_EDGE('',*,*,#6408,.F.); +#6408 = EDGE_CURVE('',#5898,#6401,#6409,.T.); +#6409 = CIRCLE('',#6410,0.12); +#6410 = AXIS2_PLACEMENT_3D('',#6411,#6412,#6413); +#6411 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#6412 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6413 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#6414 = CYLINDRICAL_SURFACE('',#6415,0.12); +#6415 = AXIS2_PLACEMENT_3D('',#6416,#6417,#6418); +#6416 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#6417 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6418 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#6419 = ADVANCED_FACE('',(#6420),#6431,.F.); +#6420 = FACE_BOUND('',#6421,.F.); +#6421 = EDGE_LOOP('',(#6422,#6428,#6429,#6430)); +#6422 = ORIENTED_EDGE('',*,*,#6423,.F.); +#6423 = EDGE_CURVE('',#5890,#6017,#6424,.T.); +#6424 = LINE('',#6425,#6426); +#6425 = CARTESIAN_POINT('',(1.375,-0.325,0.579830288983)); +#6426 = VECTOR('',#6427,1.); +#6427 = DIRECTION('',(0.,0.,1.)); +#6428 = ORIENTED_EDGE('',*,*,#5889,.T.); +#6429 = ORIENTED_EDGE('',*,*,#6344,.T.); +#6430 = ORIENTED_EDGE('',*,*,#6024,.F.); +#6431 = PLANE('',#6432); +#6432 = AXIS2_PLACEMENT_3D('',#6433,#6434,#6435); +#6433 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#6434 = DIRECTION('',(-1.,0.,0.)); +#6435 = DIRECTION('',(0.,-1.,0.)); +#6436 = ADVANCED_FACE('',(#6437),#6453,.F.); +#6437 = FACE_BOUND('',#6438,.F.); +#6438 = EDGE_LOOP('',(#6439,#6440,#6446,#6447)); +#6439 = ORIENTED_EDGE('',*,*,#6255,.F.); +#6440 = ORIENTED_EDGE('',*,*,#6441,.T.); +#6441 = EDGE_CURVE('',#6248,#6017,#6442,.T.); +#6442 = LINE('',#6443,#6444); +#6443 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#6444 = VECTOR('',#6445,1.); +#6445 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6446 = ORIENTED_EDGE('',*,*,#6016,.T.); +#6447 = ORIENTED_EDGE('',*,*,#6448,.F.); +#6448 = EDGE_CURVE('',#6256,#6009,#6449,.T.); +#6449 = LINE('',#6450,#6451); +#6450 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6451 = VECTOR('',#6452,1.); +#6452 = DIRECTION('',(0.,-1.,0.)); +#6453 = PLANE('',#6454); +#6454 = AXIS2_PLACEMENT_3D('',#6455,#6456,#6457); +#6455 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#6456 = DIRECTION('',(0.,0.,-1.)); +#6457 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6458 = ADVANCED_FACE('',(#6459),#6484,.F.); +#6459 = FACE_BOUND('',#6460,.F.); +#6460 = EDGE_LOOP('',(#6461,#6462,#6463,#6464,#6471,#6479)); +#6461 = ORIENTED_EDGE('',*,*,#6263,.T.); +#6462 = ORIENTED_EDGE('',*,*,#6448,.T.); +#6463 = ORIENTED_EDGE('',*,*,#6008,.T.); +#6464 = ORIENTED_EDGE('',*,*,#6465,.T.); +#6465 = EDGE_CURVE('',#6001,#6466,#6468,.T.); +#6466 = VERTEX_POINT('',#6467); +#6467 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6468 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6469,#6470),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6469 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#6470 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6471 = ORIENTED_EDGE('',*,*,#6472,.F.); +#6472 = EDGE_CURVE('',#6473,#6466,#6475,.T.); +#6473 = VERTEX_POINT('',#6474); +#6474 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6475 = LINE('',#6476,#6477); +#6476 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6477 = VECTOR('',#6478,1.); +#6478 = DIRECTION('',(0.,-1.,0.)); +#6479 = ORIENTED_EDGE('',*,*,#6480,.F.); +#6480 = EDGE_CURVE('',#6264,#6473,#6481,.T.); +#6481 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6482,#6483),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6482 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6483 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6484 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6485,#6486) + ,(#6487,#6488 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#6485 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6486 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6487 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#6488 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6489 = ADVANCED_FACE('',(#6490),#6507,.F.); +#6490 = FACE_BOUND('',#6491,.F.); +#6491 = EDGE_LOOP('',(#6492,#6493,#6500,#6506)); +#6492 = ORIENTED_EDGE('',*,*,#6000,.T.); +#6493 = ORIENTED_EDGE('',*,*,#6494,.T.); +#6494 = EDGE_CURVE('',#5993,#6495,#6497,.T.); +#6495 = VERTEX_POINT('',#6496); +#6496 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6497 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6498,#6499),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6498 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#6499 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6500 = ORIENTED_EDGE('',*,*,#6501,.F.); +#6501 = EDGE_CURVE('',#6466,#6495,#6502,.T.); +#6502 = LINE('',#6503,#6504); +#6503 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6504 = VECTOR('',#6505,1.); +#6505 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6506 = ORIENTED_EDGE('',*,*,#6465,.F.); +#6507 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6508,#6509) + ,(#6510,#6511 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6508 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#6509 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#6510 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#6511 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6512 = ADVANCED_FACE('',(#6513),#6530,.F.); +#6513 = FACE_BOUND('',#6514,.F.); +#6514 = EDGE_LOOP('',(#6515,#6516,#6523,#6529)); +#6515 = ORIENTED_EDGE('',*,*,#5992,.T.); +#6516 = ORIENTED_EDGE('',*,*,#6517,.T.); +#6517 = EDGE_CURVE('',#5985,#6518,#6520,.T.); +#6518 = VERTEX_POINT('',#6519); +#6519 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6520 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6521,#6522),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6521 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#6522 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6523 = ORIENTED_EDGE('',*,*,#6524,.F.); +#6524 = EDGE_CURVE('',#6495,#6518,#6525,.T.); +#6525 = LINE('',#6526,#6527); +#6526 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6527 = VECTOR('',#6528,1.); +#6528 = DIRECTION('',(-1.,0.,0.)); +#6529 = ORIENTED_EDGE('',*,*,#6494,.F.); +#6530 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6531,#6532) + ,(#6533,#6534 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#6531 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#6532 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#6533 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#6534 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6535 = ADVANCED_FACE('',(#6536),#6553,.F.); +#6536 = FACE_BOUND('',#6537,.F.); +#6537 = EDGE_LOOP('',(#6538,#6539,#6546,#6552)); +#6538 = ORIENTED_EDGE('',*,*,#5984,.T.); +#6539 = ORIENTED_EDGE('',*,*,#6540,.T.); +#6540 = EDGE_CURVE('',#5977,#6541,#6543,.T.); +#6541 = VERTEX_POINT('',#6542); +#6542 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6543 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6544,#6545),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6544 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6545 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6546 = ORIENTED_EDGE('',*,*,#6547,.F.); +#6547 = EDGE_CURVE('',#6518,#6541,#6548,.T.); +#6548 = LINE('',#6549,#6550); +#6549 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6550 = VECTOR('',#6551,1.); +#6551 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#6552 = ORIENTED_EDGE('',*,*,#6517,.F.); +#6553 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6554,#6555) + ,(#6556,#6557 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6554 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#6555 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#6556 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6557 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6558 = ADVANCED_FACE('',(#6559),#6583,.F.); +#6559 = FACE_BOUND('',#6560,.F.); +#6560 = EDGE_LOOP('',(#6561,#6562,#6568,#6569,#6576,#6582)); +#6561 = ORIENTED_EDGE('',*,*,#5976,.T.); +#6562 = ORIENTED_EDGE('',*,*,#6563,.T.); +#6563 = EDGE_CURVE('',#5969,#6222,#6564,.T.); +#6564 = LINE('',#6565,#6566); +#6565 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6566 = VECTOR('',#6567,1.); +#6567 = DIRECTION('',(0.,1.,0.)); +#6568 = ORIENTED_EDGE('',*,*,#6295,.T.); +#6569 = ORIENTED_EDGE('',*,*,#6570,.T.); +#6570 = EDGE_CURVE('',#6288,#6571,#6573,.T.); +#6571 = VERTEX_POINT('',#6572); +#6572 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6573 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6574,#6575),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6574 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6575 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6576 = ORIENTED_EDGE('',*,*,#6577,.F.); +#6577 = EDGE_CURVE('',#6541,#6571,#6578,.T.); +#6578 = LINE('',#6579,#6580); +#6579 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6580 = VECTOR('',#6581,1.); +#6581 = DIRECTION('',(0.,1.,0.)); +#6582 = ORIENTED_EDGE('',*,*,#6540,.F.); +#6583 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6584,#6585) + ,(#6586,#6587 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#6584 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#6585 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#6586 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6587 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6588 = ADVANCED_FACE('',(#6589),#6600,.F.); +#6589 = FACE_BOUND('',#6590,.F.); +#6590 = EDGE_LOOP('',(#6591,#6592,#6598,#6599)); +#6591 = ORIENTED_EDGE('',*,*,#5968,.F.); +#6592 = ORIENTED_EDGE('',*,*,#6593,.T.); +#6593 = EDGE_CURVE('',#5688,#5743,#6594,.T.); +#6594 = LINE('',#6595,#6596); +#6595 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#6596 = VECTOR('',#6597,1.); +#6597 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6598 = ORIENTED_EDGE('',*,*,#6221,.T.); +#6599 = ORIENTED_EDGE('',*,*,#6563,.F.); +#6600 = PLANE('',#6601); +#6601 = AXIS2_PLACEMENT_3D('',#6602,#6603,#6604); +#6602 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#6603 = DIRECTION('',(0.,0.,-1.)); +#6604 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6605 = ADVANCED_FACE('',(#6606),#6617,.T.); +#6606 = FACE_BOUND('',#6607,.T.); +#6607 = EDGE_LOOP('',(#6608,#6609,#6610,#6611)); +#6608 = ORIENTED_EDGE('',*,*,#6114,.T.); +#6609 = ORIENTED_EDGE('',*,*,#6593,.T.); +#6610 = ORIENTED_EDGE('',*,*,#6206,.F.); +#6611 = ORIENTED_EDGE('',*,*,#6612,.F.); +#6612 = EDGE_CURVE('',#6107,#6199,#6613,.T.); +#6613 = LINE('',#6614,#6615); +#6614 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#6615 = VECTOR('',#6616,1.); +#6616 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6617 = CYLINDRICAL_SURFACE('',#6618,0.32); +#6618 = AXIS2_PLACEMENT_3D('',#6619,#6620,#6621); +#6619 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#6620 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#6621 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#6622 = ADVANCED_FACE('',(#6623),#6634,.F.); +#6623 = FACE_BOUND('',#6624,.F.); +#6624 = EDGE_LOOP('',(#6625,#6631,#6632,#6633)); +#6625 = ORIENTED_EDGE('',*,*,#6626,.T.); +#6626 = EDGE_CURVE('',#6098,#6190,#6627,.T.); +#6627 = LINE('',#6628,#6629); +#6628 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#6629 = VECTOR('',#6630,1.); +#6630 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6631 = ORIENTED_EDGE('',*,*,#6198,.T.); +#6632 = ORIENTED_EDGE('',*,*,#6612,.F.); +#6633 = ORIENTED_EDGE('',*,*,#6106,.F.); +#6634 = PLANE('',#6635); +#6635 = AXIS2_PLACEMENT_3D('',#6636,#6637,#6638); +#6636 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#6637 = DIRECTION('',(0.989759848633,-1.098854172802E-16,-0.142742572604 + )); +#6638 = DIRECTION('',(0.142742572604,-1.584760906992E-17,0.989759848633) + ); +#6639 = ADVANCED_FACE('',(#6640),#6651,.F.); +#6640 = FACE_BOUND('',#6641,.F.); +#6641 = EDGE_LOOP('',(#6642,#6648,#6649,#6650)); +#6642 = ORIENTED_EDGE('',*,*,#6643,.T.); +#6643 = EDGE_CURVE('',#6090,#6182,#6644,.T.); +#6644 = LINE('',#6645,#6646); +#6645 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#6646 = VECTOR('',#6647,1.); +#6647 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6648 = ORIENTED_EDGE('',*,*,#6189,.T.); +#6649 = ORIENTED_EDGE('',*,*,#6626,.F.); +#6650 = ORIENTED_EDGE('',*,*,#6097,.F.); +#6651 = CYLINDRICAL_SURFACE('',#6652,0.12); +#6652 = AXIS2_PLACEMENT_3D('',#6653,#6654,#6655); +#6653 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#6654 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6655 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#6656 = ADVANCED_FACE('',(#6657),#6668,.F.); +#6657 = FACE_BOUND('',#6658,.F.); +#6658 = EDGE_LOOP('',(#6659,#6665,#6666,#6667)); +#6659 = ORIENTED_EDGE('',*,*,#6660,.T.); +#6660 = EDGE_CURVE('',#6082,#6174,#6661,.T.); +#6661 = LINE('',#6662,#6663); +#6662 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#6663 = VECTOR('',#6664,1.); +#6664 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6665 = ORIENTED_EDGE('',*,*,#6181,.T.); +#6666 = ORIENTED_EDGE('',*,*,#6643,.F.); +#6667 = ORIENTED_EDGE('',*,*,#6089,.F.); +#6668 = PLANE('',#6669); +#6669 = AXIS2_PLACEMENT_3D('',#6670,#6671,#6672); +#6670 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#6671 = DIRECTION('',(0.,0.,-1.)); +#6672 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6673 = ADVANCED_FACE('',(#6674),#6685,.F.); +#6674 = FACE_BOUND('',#6675,.F.); +#6675 = EDGE_LOOP('',(#6676,#6682,#6683,#6684)); +#6676 = ORIENTED_EDGE('',*,*,#6677,.T.); +#6677 = EDGE_CURVE('',#6074,#6166,#6678,.T.); +#6678 = LINE('',#6679,#6680); +#6679 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#6680 = VECTOR('',#6681,1.); +#6681 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6682 = ORIENTED_EDGE('',*,*,#6173,.T.); +#6683 = ORIENTED_EDGE('',*,*,#6660,.F.); +#6684 = ORIENTED_EDGE('',*,*,#6081,.F.); +#6685 = PLANE('',#6686); +#6686 = AXIS2_PLACEMENT_3D('',#6687,#6688,#6689); +#6687 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#6688 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6689 = DIRECTION('',(0.,0.,1.)); +#6690 = ADVANCED_FACE('',(#6691),#6702,.F.); +#6691 = FACE_BOUND('',#6692,.F.); +#6692 = EDGE_LOOP('',(#6693,#6699,#6700,#6701)); +#6693 = ORIENTED_EDGE('',*,*,#6694,.T.); +#6694 = EDGE_CURVE('',#6065,#6157,#6695,.T.); +#6695 = LINE('',#6696,#6697); +#6696 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17) + ); +#6697 = VECTOR('',#6698,1.); +#6698 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6699 = ORIENTED_EDGE('',*,*,#6165,.T.); +#6700 = ORIENTED_EDGE('',*,*,#6677,.F.); +#6701 = ORIENTED_EDGE('',*,*,#6073,.F.); +#6702 = PLANE('',#6703); +#6703 = AXIS2_PLACEMENT_3D('',#6704,#6705,#6706); +#6704 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17) + ); +#6705 = DIRECTION('',(0.,0.,1.)); +#6706 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6707 = ADVANCED_FACE('',(#6708),#6714,.T.); +#6708 = FACE_BOUND('',#6709,.T.); +#6709 = EDGE_LOOP('',(#6710,#6711,#6712,#6713)); +#6710 = ORIENTED_EDGE('',*,*,#6064,.T.); +#6711 = ORIENTED_EDGE('',*,*,#6694,.T.); +#6712 = ORIENTED_EDGE('',*,*,#6156,.F.); +#6713 = ORIENTED_EDGE('',*,*,#6138,.F.); +#6714 = CYLINDRICAL_SURFACE('',#6715,0.32); +#6715 = AXIS2_PLACEMENT_3D('',#6716,#6717,#6718); +#6716 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#6717 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#6718 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#6719 = ADVANCED_FACE('',(#6720),#6737,.F.); +#6720 = FACE_BOUND('',#6721,.F.); +#6721 = EDGE_LOOP('',(#6722,#6723,#6730,#6736)); +#6722 = ORIENTED_EDGE('',*,*,#6287,.T.); +#6723 = ORIENTED_EDGE('',*,*,#6724,.T.); +#6724 = EDGE_CURVE('',#6280,#6725,#6727,.T.); +#6725 = VERTEX_POINT('',#6726); +#6726 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6727 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6728,#6729),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6728 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6729 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6730 = ORIENTED_EDGE('',*,*,#6731,.F.); +#6731 = EDGE_CURVE('',#6571,#6725,#6732,.T.); +#6732 = LINE('',#6733,#6734); +#6733 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6734 = VECTOR('',#6735,1.); +#6735 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#6736 = ORIENTED_EDGE('',*,*,#6570,.F.); +#6737 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6738,#6739) + ,(#6740,#6741 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6738 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#6739 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#6740 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6741 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6742 = ADVANCED_FACE('',(#6743),#6760,.F.); +#6743 = FACE_BOUND('',#6744,.F.); +#6744 = EDGE_LOOP('',(#6745,#6746,#6753,#6759)); +#6745 = ORIENTED_EDGE('',*,*,#6279,.T.); +#6746 = ORIENTED_EDGE('',*,*,#6747,.T.); +#6747 = EDGE_CURVE('',#6272,#6748,#6750,.T.); +#6748 = VERTEX_POINT('',#6749); +#6749 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6750 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6751,#6752),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6751 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6752 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6753 = ORIENTED_EDGE('',*,*,#6754,.F.); +#6754 = EDGE_CURVE('',#6725,#6748,#6755,.T.); +#6755 = LINE('',#6756,#6757); +#6756 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6757 = VECTOR('',#6758,1.); +#6758 = DIRECTION('',(1.,0.,0.)); +#6759 = ORIENTED_EDGE('',*,*,#6724,.F.); +#6760 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6761,#6762) + ,(#6763,#6764 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#6761 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#6762 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#6763 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6764 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6765 = ADVANCED_FACE('',(#6766),#6777,.F.); +#6766 = FACE_BOUND('',#6767,.F.); +#6767 = EDGE_LOOP('',(#6768,#6769,#6770,#6776)); +#6768 = ORIENTED_EDGE('',*,*,#6271,.T.); +#6769 = ORIENTED_EDGE('',*,*,#6480,.T.); +#6770 = ORIENTED_EDGE('',*,*,#6771,.F.); +#6771 = EDGE_CURVE('',#6748,#6473,#6772,.T.); +#6772 = LINE('',#6773,#6774); +#6773 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6774 = VECTOR('',#6775,1.); +#6775 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6776 = ORIENTED_EDGE('',*,*,#6747,.F.); +#6777 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6778,#6779) + ,(#6780,#6781 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6778 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#6779 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#6780 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#6781 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#6782 = ADVANCED_FACE('',(#6783),#6852,.F.); +#6783 = FACE_BOUND('',#6784,.F.); +#6784 = EDGE_LOOP('',(#6785,#6786,#6787,#6795,#6804,#6812,#6820,#6828, + #6837,#6845)); +#6785 = ORIENTED_EDGE('',*,*,#6375,.F.); +#6786 = ORIENTED_EDGE('',*,*,#6408,.T.); +#6787 = ORIENTED_EDGE('',*,*,#6788,.T.); +#6788 = EDGE_CURVE('',#6401,#6789,#6791,.T.); +#6789 = VERTEX_POINT('',#6790); +#6790 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#6791 = LINE('',#6792,#6793); +#6792 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#6793 = VECTOR('',#6794,1.); +#6794 = DIRECTION('',(0.142742572604,-3.169521813984E-17,-0.989759848633 + )); +#6795 = ORIENTED_EDGE('',*,*,#6796,.T.); +#6796 = EDGE_CURVE('',#6789,#6797,#6799,.T.); +#6797 = VERTEX_POINT('',#6798); +#6798 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17)); +#6799 = CIRCLE('',#6800,0.32); +#6800 = AXIS2_PLACEMENT_3D('',#6801,#6802,#6803); +#6801 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#6802 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6803 = DIRECTION('',(-0.984807753012,2.186712484447E-16,-0.173648177667 + )); +#6804 = ORIENTED_EDGE('',*,*,#6805,.T.); +#6805 = EDGE_CURVE('',#6797,#6806,#6808,.T.); +#6806 = VERTEX_POINT('',#6807); +#6807 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#6808 = LINE('',#6809,#6810); +#6809 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17)); +#6810 = VECTOR('',#6811,1.); +#6811 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6812 = ORIENTED_EDGE('',*,*,#6813,.T.); +#6813 = EDGE_CURVE('',#6806,#6814,#6816,.T.); +#6814 = VERTEX_POINT('',#6815); +#6815 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#6816 = LINE('',#6817,#6818); +#6817 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#6818 = VECTOR('',#6819,1.); +#6819 = DIRECTION('',(0.,0.,1.)); +#6820 = ORIENTED_EDGE('',*,*,#6821,.T.); +#6821 = EDGE_CURVE('',#6814,#6822,#6824,.T.); +#6822 = VERTEX_POINT('',#6823); +#6823 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#6824 = LINE('',#6825,#6826); +#6825 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#6826 = VECTOR('',#6827,1.); +#6827 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6828 = ORIENTED_EDGE('',*,*,#6829,.T.); +#6829 = EDGE_CURVE('',#6822,#6830,#6832,.T.); +#6830 = VERTEX_POINT('',#6831); +#6831 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#6832 = CIRCLE('',#6833,0.12); +#6833 = AXIS2_PLACEMENT_3D('',#6834,#6835,#6836); +#6834 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#6835 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6836 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#6837 = ORIENTED_EDGE('',*,*,#6838,.T.); +#6838 = EDGE_CURVE('',#6830,#6839,#6841,.T.); +#6839 = VERTEX_POINT('',#6840); +#6840 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#6841 = LINE('',#6842,#6843); +#6842 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#6843 = VECTOR('',#6844,1.); +#6844 = DIRECTION('',(-0.142742572604,3.169521813984E-17,0.989759848633) + ); +#6845 = ORIENTED_EDGE('',*,*,#6846,.T.); +#6846 = EDGE_CURVE('',#6839,#6248,#6847,.T.); +#6847 = CIRCLE('',#6848,0.32); +#6848 = AXIS2_PLACEMENT_3D('',#6849,#6850,#6851); +#6849 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#6850 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6851 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667) + ); +#6852 = PLANE('',#6853); +#6853 = AXIS2_PLACEMENT_3D('',#6854,#6855,#6856); +#6854 = CARTESIAN_POINT('',(1.610729118287,0.325,0.384660577966)); +#6855 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6856 = DIRECTION('',(0.,0.,1.)); +#6857 = ADVANCED_FACE('',(#6858),#6876,.F.); +#6858 = FACE_BOUND('',#6859,.F.); +#6859 = EDGE_LOOP('',(#6860,#6861,#6869,#6875)); +#6860 = ORIENTED_EDGE('',*,*,#6400,.T.); +#6861 = ORIENTED_EDGE('',*,*,#6862,.T.); +#6862 = EDGE_CURVE('',#6392,#6863,#6865,.T.); +#6863 = VERTEX_POINT('',#6864); +#6864 = CARTESIAN_POINT('',(1.523665661432,-0.325,0.264432583147)); +#6865 = LINE('',#6866,#6867); +#6866 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#6867 = VECTOR('',#6868,1.); +#6868 = DIRECTION('',(0.142742572604,-3.169521813984E-17,-0.989759848633 + )); +#6869 = ORIENTED_EDGE('',*,*,#6870,.F.); +#6870 = EDGE_CURVE('',#6789,#6863,#6871,.T.); +#6871 = LINE('',#6872,#6873); +#6872 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#6873 = VECTOR('',#6874,1.); +#6874 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6875 = ORIENTED_EDGE('',*,*,#6788,.F.); +#6876 = PLANE('',#6877); +#6877 = AXIS2_PLACEMENT_3D('',#6878,#6879,#6880); +#6878 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#6879 = DIRECTION('',(0.989759848633,-2.197708345604E-16,0.142742572604) + ); +#6880 = DIRECTION('',(0.142742572604,-3.169521813984E-17,-0.989759848633 + )); +#6881 = ADVANCED_FACE('',(#6882),#6944,.T.); +#6882 = FACE_BOUND('',#6883,.T.); +#6883 = EDGE_LOOP('',(#6884,#6885,#6886,#6887,#6896,#6904,#6912,#6920, + #6929,#6937)); +#6884 = ORIENTED_EDGE('',*,*,#6423,.F.); +#6885 = ORIENTED_EDGE('',*,*,#6391,.T.); +#6886 = ORIENTED_EDGE('',*,*,#6862,.T.); +#6887 = ORIENTED_EDGE('',*,*,#6888,.T.); +#6888 = EDGE_CURVE('',#6863,#6889,#6891,.T.); +#6889 = VERTEX_POINT('',#6890); +#6890 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17)); +#6891 = CIRCLE('',#6892,0.32); +#6892 = AXIS2_PLACEMENT_3D('',#6893,#6894,#6895); +#6893 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#6894 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6895 = DIRECTION('',(-0.984807753012,2.186712484447E-16,-0.173648177667 + )); +#6896 = ORIENTED_EDGE('',*,*,#6897,.T.); +#6897 = EDGE_CURVE('',#6889,#6898,#6900,.T.); +#6898 = VERTEX_POINT('',#6899); +#6899 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#6900 = LINE('',#6901,#6902); +#6901 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17)); +#6902 = VECTOR('',#6903,1.); +#6903 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#6904 = ORIENTED_EDGE('',*,*,#6905,.T.); +#6905 = EDGE_CURVE('',#6898,#6906,#6908,.T.); +#6906 = VERTEX_POINT('',#6907); +#6907 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#6908 = LINE('',#6909,#6910); +#6909 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#6910 = VECTOR('',#6911,1.); +#6911 = DIRECTION('',(0.,0.,1.)); +#6912 = ORIENTED_EDGE('',*,*,#6913,.T.); +#6913 = EDGE_CURVE('',#6906,#6914,#6916,.T.); +#6914 = VERTEX_POINT('',#6915); +#6915 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.2)); +#6916 = LINE('',#6917,#6918); +#6917 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#6918 = VECTOR('',#6919,1.); +#6919 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#6920 = ORIENTED_EDGE('',*,*,#6921,.T.); +#6921 = EDGE_CURVE('',#6914,#6922,#6924,.T.); +#6922 = VERTEX_POINT('',#6923); +#6923 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#6924 = CIRCLE('',#6925,0.12); +#6925 = AXIS2_PLACEMENT_3D('',#6926,#6927,#6928); +#6926 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#6927 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6928 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#6929 = ORIENTED_EDGE('',*,*,#6930,.T.); +#6930 = EDGE_CURVE('',#6922,#6931,#6933,.T.); +#6931 = VERTEX_POINT('',#6932); +#6932 = CARTESIAN_POINT('',(1.690138480964,-0.325,0.510567416853)); +#6933 = LINE('',#6934,#6935); +#6934 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#6935 = VECTOR('',#6936,1.); +#6936 = DIRECTION('',(-0.142742572604,3.169521813984E-17,0.989759848633) + ); +#6937 = ORIENTED_EDGE('',*,*,#6938,.T.); +#6938 = EDGE_CURVE('',#6931,#6017,#6939,.T.); +#6939 = CIRCLE('',#6940,0.32); +#6940 = AXIS2_PLACEMENT_3D('',#6941,#6942,#6943); +#6941 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#6942 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6943 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667) + ); +#6944 = PLANE('',#6945); +#6945 = AXIS2_PLACEMENT_3D('',#6946,#6947,#6948); +#6946 = CARTESIAN_POINT('',(1.610729118287,-0.325,0.384660577966)); +#6947 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6948 = DIRECTION('',(0.,0.,1.)); +#6949 = ADVANCED_FACE('',(#6950),#6961,.T.); +#6950 = FACE_BOUND('',#6951,.T.); +#6951 = EDGE_LOOP('',(#6952,#6953,#6954,#6955)); +#6952 = ORIENTED_EDGE('',*,*,#6846,.T.); +#6953 = ORIENTED_EDGE('',*,*,#6441,.T.); +#6954 = ORIENTED_EDGE('',*,*,#6938,.F.); +#6955 = ORIENTED_EDGE('',*,*,#6956,.F.); +#6956 = EDGE_CURVE('',#6839,#6931,#6957,.T.); +#6957 = LINE('',#6958,#6959); +#6958 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#6959 = VECTOR('',#6960,1.); +#6960 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#6961 = CYLINDRICAL_SURFACE('',#6962,0.32); +#6962 = AXIS2_PLACEMENT_3D('',#6963,#6964,#6965); +#6963 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#6964 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#6965 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667) + ); +#6966 = ADVANCED_FACE('',(#6967,#6977),#7011,.T.); +#6967 = FACE_BOUND('',#6968,.T.); +#6968 = EDGE_LOOP('',(#6969,#6970,#6971,#6972,#6973,#6974,#6975,#6976)); +#6969 = ORIENTED_EDGE('',*,*,#6577,.F.); +#6970 = ORIENTED_EDGE('',*,*,#6547,.F.); +#6971 = ORIENTED_EDGE('',*,*,#6524,.F.); +#6972 = ORIENTED_EDGE('',*,*,#6501,.F.); +#6973 = ORIENTED_EDGE('',*,*,#6472,.F.); +#6974 = ORIENTED_EDGE('',*,*,#6771,.F.); +#6975 = ORIENTED_EDGE('',*,*,#6754,.F.); +#6976 = ORIENTED_EDGE('',*,*,#6731,.F.); +#6977 = FACE_BOUND('',#6978,.T.); +#6978 = EDGE_LOOP('',(#6979,#6989,#6997,#7005)); +#6979 = ORIENTED_EDGE('',*,*,#6980,.T.); +#6980 = EDGE_CURVE('',#6981,#6983,#6985,.T.); +#6981 = VERTEX_POINT('',#6982); +#6982 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.25)); +#6983 = VERTEX_POINT('',#6984); +#6984 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.25)); +#6985 = LINE('',#6986,#6987); +#6986 = CARTESIAN_POINT('',(-1.233243103516,-0.608243103516,1.25)); +#6987 = VECTOR('',#6988,1.); +#6988 = DIRECTION('',(-1.,0.,0.)); +#6989 = ORIENTED_EDGE('',*,*,#6990,.T.); +#6990 = EDGE_CURVE('',#6983,#6991,#6993,.T.); +#6991 = VERTEX_POINT('',#6992); +#6992 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.25)); +#6993 = LINE('',#6994,#6995); +#6994 = CARTESIAN_POINT('',(-1.183243103516,-0.633682327637,1.25)); +#6995 = VECTOR('',#6996,1.); +#6996 = DIRECTION('',(0.,1.,0.)); +#6997 = ORIENTED_EDGE('',*,*,#6998,.F.); +#6998 = EDGE_CURVE('',#6999,#6991,#7001,.T.); +#6999 = VERTEX_POINT('',#7000); +#7000 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.25)); +#7001 = LINE('',#7002,#7003); +#7002 = CARTESIAN_POINT('',(-1.233243103516,0.608243103516,1.25)); +#7003 = VECTOR('',#7004,1.); +#7004 = DIRECTION('',(-1.,0.,0.)); +#7005 = ORIENTED_EDGE('',*,*,#7006,.F.); +#7006 = EDGE_CURVE('',#6981,#6999,#7007,.T.); +#7007 = LINE('',#7008,#7009); +#7008 = CARTESIAN_POINT('',(-0.683243103516,-0.633682327637,1.25)); +#7009 = VECTOR('',#7010,1.); +#7010 = DIRECTION('',(0.,1.,0.)); +#7011 = PLANE('',#7012); +#7012 = AXIS2_PLACEMENT_3D('',#7013,#7014,#7015); +#7013 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#7014 = DIRECTION('',(0.,0.,1.)); +#7015 = DIRECTION('',(0.889522261294,0.456891832562,-0.)); +#7016 = ADVANCED_FACE('',(#7017),#7028,.F.); +#7017 = FACE_BOUND('',#7018,.F.); +#7018 = EDGE_LOOP('',(#7019,#7025,#7026,#7027)); +#7019 = ORIENTED_EDGE('',*,*,#7020,.T.); +#7020 = EDGE_CURVE('',#6830,#6922,#7021,.T.); +#7021 = LINE('',#7022,#7023); +#7022 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#7023 = VECTOR('',#7024,1.); +#7024 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7025 = ORIENTED_EDGE('',*,*,#6930,.T.); +#7026 = ORIENTED_EDGE('',*,*,#6956,.F.); +#7027 = ORIENTED_EDGE('',*,*,#6838,.F.); +#7028 = PLANE('',#7029); +#7029 = AXIS2_PLACEMENT_3D('',#7030,#7031,#7032); +#7030 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#7031 = DIRECTION('',(-0.989759848633,2.197708345604E-16,-0.142742572604 + )); +#7032 = DIRECTION('',(-0.142742572604,3.169521813984E-17,0.989759848633) + ); +#7033 = ADVANCED_FACE('',(#7034),#7045,.F.); +#7034 = FACE_BOUND('',#7035,.F.); +#7035 = EDGE_LOOP('',(#7036,#7042,#7043,#7044)); +#7036 = ORIENTED_EDGE('',*,*,#7037,.T.); +#7037 = EDGE_CURVE('',#6822,#6914,#7038,.T.); +#7038 = LINE('',#7039,#7040); +#7039 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#7040 = VECTOR('',#7041,1.); +#7041 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7042 = ORIENTED_EDGE('',*,*,#6921,.T.); +#7043 = ORIENTED_EDGE('',*,*,#7020,.F.); +#7044 = ORIENTED_EDGE('',*,*,#6829,.F.); +#7045 = CYLINDRICAL_SURFACE('',#7046,0.12); +#7046 = AXIS2_PLACEMENT_3D('',#7047,#7048,#7049); +#7047 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#7048 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#7049 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#7050 = ADVANCED_FACE('',(#7051),#7062,.F.); +#7051 = FACE_BOUND('',#7052,.F.); +#7052 = EDGE_LOOP('',(#7053,#7059,#7060,#7061)); +#7053 = ORIENTED_EDGE('',*,*,#7054,.T.); +#7054 = EDGE_CURVE('',#6814,#6906,#7055,.T.); +#7055 = LINE('',#7056,#7057); +#7056 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#7057 = VECTOR('',#7058,1.); +#7058 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7059 = ORIENTED_EDGE('',*,*,#6913,.T.); +#7060 = ORIENTED_EDGE('',*,*,#7037,.F.); +#7061 = ORIENTED_EDGE('',*,*,#6821,.F.); +#7062 = PLANE('',#7063); +#7063 = AXIS2_PLACEMENT_3D('',#7064,#7065,#7066); +#7064 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#7065 = DIRECTION('',(0.,0.,-1.)); +#7066 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#7067 = ADVANCED_FACE('',(#7068),#7079,.F.); +#7068 = FACE_BOUND('',#7069,.F.); +#7069 = EDGE_LOOP('',(#7070,#7076,#7077,#7078)); +#7070 = ORIENTED_EDGE('',*,*,#7071,.T.); +#7071 = EDGE_CURVE('',#6806,#6898,#7072,.T.); +#7072 = LINE('',#7073,#7074); +#7073 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#7074 = VECTOR('',#7075,1.); +#7075 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7076 = ORIENTED_EDGE('',*,*,#6905,.T.); +#7077 = ORIENTED_EDGE('',*,*,#7054,.F.); +#7078 = ORIENTED_EDGE('',*,*,#6813,.F.); +#7079 = PLANE('',#7080); +#7080 = AXIS2_PLACEMENT_3D('',#7081,#7082,#7083); +#7081 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#7082 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#7083 = DIRECTION('',(0.,0.,1.)); +#7084 = ADVANCED_FACE('',(#7085),#7096,.F.); +#7085 = FACE_BOUND('',#7086,.F.); +#7086 = EDGE_LOOP('',(#7087,#7093,#7094,#7095)); +#7087 = ORIENTED_EDGE('',*,*,#7088,.T.); +#7088 = EDGE_CURVE('',#6797,#6889,#7089,.T.); +#7089 = LINE('',#7090,#7091); +#7090 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17)); +#7091 = VECTOR('',#7092,1.); +#7092 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#7093 = ORIENTED_EDGE('',*,*,#6897,.T.); +#7094 = ORIENTED_EDGE('',*,*,#7071,.F.); +#7095 = ORIENTED_EDGE('',*,*,#6805,.F.); +#7096 = PLANE('',#7097); +#7097 = AXIS2_PLACEMENT_3D('',#7098,#7099,#7100); +#7098 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17)); +#7099 = DIRECTION('',(0.,0.,1.)); +#7100 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#7101 = ADVANCED_FACE('',(#7102),#7108,.T.); +#7102 = FACE_BOUND('',#7103,.T.); +#7103 = EDGE_LOOP('',(#7104,#7105,#7106,#7107)); +#7104 = ORIENTED_EDGE('',*,*,#6796,.T.); +#7105 = ORIENTED_EDGE('',*,*,#7088,.T.); +#7106 = ORIENTED_EDGE('',*,*,#6888,.F.); +#7107 = ORIENTED_EDGE('',*,*,#6870,.F.); +#7108 = CYLINDRICAL_SURFACE('',#7109,0.32); +#7109 = AXIS2_PLACEMENT_3D('',#7110,#7111,#7112); +#7110 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#7111 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#7112 = DIRECTION('',(-0.984807753012,2.186712484447E-16,-0.173648177667 + )); +#7113 = ADVANCED_FACE('',(#7114),#7139,.F.); +#7114 = FACE_BOUND('',#7115,.F.); +#7115 = EDGE_LOOP('',(#7116,#7117,#7125,#7133)); +#7116 = ORIENTED_EDGE('',*,*,#6980,.T.); +#7117 = ORIENTED_EDGE('',*,*,#7118,.T.); +#7118 = EDGE_CURVE('',#6983,#7119,#7121,.T.); +#7119 = VERTEX_POINT('',#7120); +#7120 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#7121 = LINE('',#7122,#7123); +#7122 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#7123 = VECTOR('',#7124,1.); +#7124 = DIRECTION('',(0.,0.,1.)); +#7125 = ORIENTED_EDGE('',*,*,#7126,.T.); +#7126 = EDGE_CURVE('',#7119,#7127,#7129,.T.); +#7127 = VERTEX_POINT('',#7128); +#7128 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#7129 = LINE('',#7130,#7131); +#7130 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#7131 = VECTOR('',#7132,1.); +#7132 = DIRECTION('',(1.,0.,0.)); +#7133 = ORIENTED_EDGE('',*,*,#7134,.F.); +#7134 = EDGE_CURVE('',#6981,#7127,#7135,.T.); +#7135 = LINE('',#7136,#7137); +#7136 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#7137 = VECTOR('',#7138,1.); +#7138 = DIRECTION('',(0.,0.,1.)); +#7139 = PLANE('',#7140); +#7140 = AXIS2_PLACEMENT_3D('',#7141,#7142,#7143); +#7141 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#7142 = DIRECTION('',(0.,1.,0.)); +#7143 = DIRECTION('',(0.,-0.,1.)); +#7144 = ADVANCED_FACE('',(#7145),#7163,.T.); +#7145 = FACE_BOUND('',#7146,.T.); +#7146 = EDGE_LOOP('',(#7147,#7148,#7149,#7157)); +#7147 = ORIENTED_EDGE('',*,*,#7134,.F.); +#7148 = ORIENTED_EDGE('',*,*,#7006,.T.); +#7149 = ORIENTED_EDGE('',*,*,#7150,.T.); +#7150 = EDGE_CURVE('',#6999,#7151,#7153,.T.); +#7151 = VERTEX_POINT('',#7152); +#7152 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.26)); +#7153 = LINE('',#7154,#7155); +#7154 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.24)); +#7155 = VECTOR('',#7156,1.); +#7156 = DIRECTION('',(0.,0.,1.)); +#7157 = ORIENTED_EDGE('',*,*,#7158,.F.); +#7158 = EDGE_CURVE('',#7127,#7151,#7159,.T.); +#7159 = LINE('',#7160,#7161); +#7160 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#7161 = VECTOR('',#7162,1.); +#7162 = DIRECTION('',(0.,1.,0.)); +#7163 = PLANE('',#7164); +#7164 = AXIS2_PLACEMENT_3D('',#7165,#7166,#7167); +#7165 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#7166 = DIRECTION('',(1.,0.,0.)); +#7167 = DIRECTION('',(0.,0.,1.)); +#7168 = ADVANCED_FACE('',(#7169),#7187,.T.); +#7169 = FACE_BOUND('',#7170,.T.); +#7170 = EDGE_LOOP('',(#7171,#7172,#7180,#7186)); +#7171 = ORIENTED_EDGE('',*,*,#6998,.T.); +#7172 = ORIENTED_EDGE('',*,*,#7173,.T.); +#7173 = EDGE_CURVE('',#6991,#7174,#7176,.T.); +#7174 = VERTEX_POINT('',#7175); +#7175 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#7176 = LINE('',#7177,#7178); +#7177 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#7178 = VECTOR('',#7179,1.); +#7179 = DIRECTION('',(0.,0.,1.)); +#7180 = ORIENTED_EDGE('',*,*,#7181,.T.); +#7181 = EDGE_CURVE('',#7174,#7151,#7182,.T.); +#7182 = LINE('',#7183,#7184); +#7183 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#7184 = VECTOR('',#7185,1.); +#7185 = DIRECTION('',(1.,0.,0.)); +#7186 = ORIENTED_EDGE('',*,*,#7150,.F.); +#7187 = PLANE('',#7188); +#7188 = AXIS2_PLACEMENT_3D('',#7189,#7190,#7191); +#7189 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#7190 = DIRECTION('',(0.,1.,0.)); +#7191 = DIRECTION('',(0.,-0.,1.)); +#7192 = ADVANCED_FACE('',(#7193),#7204,.F.); +#7193 = FACE_BOUND('',#7194,.F.); +#7194 = EDGE_LOOP('',(#7195,#7196,#7197,#7198)); +#7195 = ORIENTED_EDGE('',*,*,#7118,.F.); +#7196 = ORIENTED_EDGE('',*,*,#6990,.T.); +#7197 = ORIENTED_EDGE('',*,*,#7173,.T.); +#7198 = ORIENTED_EDGE('',*,*,#7199,.F.); +#7199 = EDGE_CURVE('',#7119,#7174,#7200,.T.); +#7200 = LINE('',#7201,#7202); +#7201 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#7202 = VECTOR('',#7203,1.); +#7203 = DIRECTION('',(0.,1.,0.)); +#7204 = PLANE('',#7205); +#7205 = AXIS2_PLACEMENT_3D('',#7206,#7207,#7208); +#7206 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#7207 = DIRECTION('',(1.,0.,0.)); +#7208 = DIRECTION('',(0.,0.,1.)); +#7209 = ADVANCED_FACE('',(#7210),#7216,.T.); +#7210 = FACE_BOUND('',#7211,.T.); +#7211 = EDGE_LOOP('',(#7212,#7213,#7214,#7215)); +#7212 = ORIENTED_EDGE('',*,*,#7199,.F.); +#7213 = ORIENTED_EDGE('',*,*,#7126,.T.); +#7214 = ORIENTED_EDGE('',*,*,#7158,.T.); +#7215 = ORIENTED_EDGE('',*,*,#7181,.F.); +#7216 = PLANE('',#7217); +#7217 = AXIS2_PLACEMENT_3D('',#7218,#7219,#7220); +#7218 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#7219 = DIRECTION('',(0.,0.,1.)); +#7220 = DIRECTION('',(1.,0.,-0.)); +#7221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#7225)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#7222,#7223,#7224)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#7222 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#7223 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#7224 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#7225 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#7222, + 'distance_accuracy_value','confusion accuracy'); +#7226 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#7227,#7229); +#7227 = ( REPRESENTATION_RELATIONSHIP('','',#5532,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#7228) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#7228 = ITEM_DEFINED_TRANSFORMATION('','',#11,#83); +#7229 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #7230); +#7230 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('18','D3','',#5,#5527,$); +#7231 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#5529)); +#7232 = SHAPE_DEFINITION_REPRESENTATION(#7233,#7239); +#7233 = PRODUCT_DEFINITION_SHAPE('','',#7234); +#7234 = PRODUCT_DEFINITION('design','',#7235,#7238); +#7235 = PRODUCT_DEFINITION_FORMATION('','',#7236); +#7236 = PRODUCT('LED_0603_1608Metric','LED_0603_1608Metric','',(#7237)); +#7237 = PRODUCT_CONTEXT('',#2,'mechanical'); +#7238 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#7239 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#7240),#8763); +#7240 = MANIFOLD_SOLID_BREP('',#7241); +#7241 = CLOSED_SHELL('',(#7242,#7282,#7329,#7408,#7432,#7472,#7503,#7520 + ,#7553,#7577,#7644,#7765,#7832,#7856,#7887,#7920,#7976,#8000,#8024, + #8048,#8081,#8093,#8156,#8181,#8198,#8222,#8240,#8258,#8276,#8293, + #8310,#8341,#8366,#8391,#8415,#8432,#8463,#8487,#8504,#8532,#8557, + #8581,#8606,#8653,#8670,#8682,#8704,#8716,#8734,#8752)); +#7242 = ADVANCED_FACE('',(#7243),#7277,.F.); +#7243 = FACE_BOUND('',#7244,.F.); +#7244 = EDGE_LOOP('',(#7245,#7255,#7263,#7271)); +#7245 = ORIENTED_EDGE('',*,*,#7246,.T.); +#7246 = EDGE_CURVE('',#7247,#7249,#7251,.T.); +#7247 = VERTEX_POINT('',#7248); +#7248 = CARTESIAN_POINT('',(-0.5,-0.4,0.47)); +#7249 = VERTEX_POINT('',#7250); +#7250 = CARTESIAN_POINT('',(-0.45,-0.4,1.1)); +#7251 = LINE('',#7252,#7253); +#7252 = CARTESIAN_POINT('',(-0.5,-0.4,0.47)); +#7253 = VECTOR('',#7254,1.); +#7254 = DIRECTION('',(7.911630099815E-02,0.,0.996865392576)); +#7255 = ORIENTED_EDGE('',*,*,#7256,.T.); +#7256 = EDGE_CURVE('',#7249,#7257,#7259,.T.); +#7257 = VERTEX_POINT('',#7258); +#7258 = CARTESIAN_POINT('',(0.45,-0.4,1.1)); +#7259 = LINE('',#7260,#7261); +#7260 = CARTESIAN_POINT('',(-0.45,-0.4,1.1)); +#7261 = VECTOR('',#7262,1.); +#7262 = DIRECTION('',(1.,0.,0.)); +#7263 = ORIENTED_EDGE('',*,*,#7264,.T.); +#7264 = EDGE_CURVE('',#7257,#7265,#7267,.T.); +#7265 = VERTEX_POINT('',#7266); +#7266 = CARTESIAN_POINT('',(0.5,-0.4,0.47)); +#7267 = LINE('',#7268,#7269); +#7268 = CARTESIAN_POINT('',(0.45,-0.4,1.1)); +#7269 = VECTOR('',#7270,1.); +#7270 = DIRECTION('',(7.911630099815E-02,0.,-0.996865392576)); +#7271 = ORIENTED_EDGE('',*,*,#7272,.T.); +#7272 = EDGE_CURVE('',#7265,#7247,#7273,.T.); +#7273 = LINE('',#7274,#7275); +#7274 = CARTESIAN_POINT('',(0.5,-0.4,0.47)); +#7275 = VECTOR('',#7276,1.); +#7276 = DIRECTION('',(-1.,0.,0.)); +#7277 = PLANE('',#7278); +#7278 = AXIS2_PLACEMENT_3D('',#7279,#7280,#7281); +#7279 = CARTESIAN_POINT('',(-8.772411109409E-18,-0.4,0.775044128294)); +#7280 = DIRECTION('',(0.,1.,0.)); +#7281 = DIRECTION('',(0.,-0.,1.)); +#7282 = ADVANCED_FACE('',(#7283),#7324,.T.); +#7283 = FACE_BOUND('',#7284,.T.); +#7284 = EDGE_LOOP('',(#7285,#7295,#7303,#7309,#7310,#7318)); +#7285 = ORIENTED_EDGE('',*,*,#7286,.T.); +#7286 = EDGE_CURVE('',#7287,#7289,#7291,.T.); +#7287 = VERTEX_POINT('',#7288); +#7288 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7289 = VERTEX_POINT('',#7290); +#7290 = CARTESIAN_POINT('',(-0.5,0.3,0.47)); +#7291 = LINE('',#7292,#7293); +#7292 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7293 = VECTOR('',#7294,1.); +#7294 = DIRECTION('',(0.,-1.,0.)); +#7295 = ORIENTED_EDGE('',*,*,#7296,.F.); +#7296 = EDGE_CURVE('',#7297,#7289,#7299,.T.); +#7297 = VERTEX_POINT('',#7298); +#7298 = CARTESIAN_POINT('',(-0.5,-0.3,0.47)); +#7299 = LINE('',#7300,#7301); +#7300 = CARTESIAN_POINT('',(-0.5,-0.4,0.47)); +#7301 = VECTOR('',#7302,1.); +#7302 = DIRECTION('',(0.,1.,0.)); +#7303 = ORIENTED_EDGE('',*,*,#7304,.T.); +#7304 = EDGE_CURVE('',#7297,#7247,#7305,.T.); +#7305 = LINE('',#7306,#7307); +#7306 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7307 = VECTOR('',#7308,1.); +#7308 = DIRECTION('',(0.,-1.,0.)); +#7309 = ORIENTED_EDGE('',*,*,#7246,.T.); +#7310 = ORIENTED_EDGE('',*,*,#7311,.F.); +#7311 = EDGE_CURVE('',#7312,#7249,#7314,.T.); +#7312 = VERTEX_POINT('',#7313); +#7313 = CARTESIAN_POINT('',(-0.45,0.4,1.1)); +#7314 = LINE('',#7315,#7316); +#7315 = CARTESIAN_POINT('',(-0.45,0.4,1.1)); +#7316 = VECTOR('',#7317,1.); +#7317 = DIRECTION('',(0.,-1.,0.)); +#7318 = ORIENTED_EDGE('',*,*,#7319,.F.); +#7319 = EDGE_CURVE('',#7287,#7312,#7320,.T.); +#7320 = LINE('',#7321,#7322); +#7321 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7322 = VECTOR('',#7323,1.); +#7323 = DIRECTION('',(7.911630099815E-02,0.,0.996865392576)); +#7324 = PLANE('',#7325); +#7325 = AXIS2_PLACEMENT_3D('',#7326,#7327,#7328); +#7326 = CARTESIAN_POINT('',(-0.5,0.4,0.47)); +#7327 = DIRECTION('',(-0.996865392576,0.,7.911630099815E-02)); +#7328 = DIRECTION('',(7.911630099815E-02,0.,0.996865392576)); +#7329 = ADVANCED_FACE('',(#7330),#7403,.F.); +#7330 = FACE_BOUND('',#7331,.F.); +#7331 = EDGE_LOOP('',(#7332,#7342,#7350,#7358,#7364,#7365,#7373,#7381, + #7389,#7397)); +#7332 = ORIENTED_EDGE('',*,*,#7333,.F.); +#7333 = EDGE_CURVE('',#7334,#7336,#7338,.T.); +#7334 = VERTEX_POINT('',#7335); +#7335 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7336 = VERTEX_POINT('',#7337); +#7337 = CARTESIAN_POINT('',(-0.725,-0.4,3.E-02)); +#7338 = LINE('',#7339,#7340); +#7339 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7340 = VECTOR('',#7341,1.); +#7341 = DIRECTION('',(1.,0.,0.)); +#7342 = ORIENTED_EDGE('',*,*,#7343,.T.); +#7343 = EDGE_CURVE('',#7334,#7344,#7346,.T.); +#7344 = VERTEX_POINT('',#7345); +#7345 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7346 = LINE('',#7347,#7348); +#7347 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7348 = VECTOR('',#7349,1.); +#7349 = DIRECTION('',(0.,0.,1.)); +#7350 = ORIENTED_EDGE('',*,*,#7351,.T.); +#7351 = EDGE_CURVE('',#7344,#7352,#7354,.T.); +#7352 = VERTEX_POINT('',#7353); +#7353 = CARTESIAN_POINT('',(-0.725,-0.4,0.47)); +#7354 = LINE('',#7355,#7356); +#7355 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7356 = VECTOR('',#7357,1.); +#7357 = DIRECTION('',(1.,0.,0.)); +#7358 = ORIENTED_EDGE('',*,*,#7359,.T.); +#7359 = EDGE_CURVE('',#7352,#7247,#7360,.T.); +#7360 = LINE('',#7361,#7362); +#7361 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7362 = VECTOR('',#7363,1.); +#7363 = DIRECTION('',(1.,0.,0.)); +#7364 = ORIENTED_EDGE('',*,*,#7272,.F.); +#7365 = ORIENTED_EDGE('',*,*,#7366,.T.); +#7366 = EDGE_CURVE('',#7265,#7367,#7369,.T.); +#7367 = VERTEX_POINT('',#7368); +#7368 = CARTESIAN_POINT('',(0.725,-0.4,0.47)); +#7369 = LINE('',#7370,#7371); +#7370 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7371 = VECTOR('',#7372,1.); +#7372 = DIRECTION('',(1.,0.,0.)); +#7373 = ORIENTED_EDGE('',*,*,#7374,.T.); +#7374 = EDGE_CURVE('',#7367,#7375,#7377,.T.); +#7375 = VERTEX_POINT('',#7376); +#7376 = CARTESIAN_POINT('',(0.77,-0.4,0.47)); +#7377 = LINE('',#7378,#7379); +#7378 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7379 = VECTOR('',#7380,1.); +#7380 = DIRECTION('',(1.,0.,0.)); +#7381 = ORIENTED_EDGE('',*,*,#7382,.F.); +#7382 = EDGE_CURVE('',#7383,#7375,#7385,.T.); +#7383 = VERTEX_POINT('',#7384); +#7384 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02)); +#7385 = LINE('',#7386,#7387); +#7386 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02)); +#7387 = VECTOR('',#7388,1.); +#7388 = DIRECTION('',(0.,0.,1.)); +#7389 = ORIENTED_EDGE('',*,*,#7390,.F.); +#7390 = EDGE_CURVE('',#7391,#7383,#7393,.T.); +#7391 = VERTEX_POINT('',#7392); +#7392 = CARTESIAN_POINT('',(0.725,-0.4,3.E-02)); +#7393 = LINE('',#7394,#7395); +#7394 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7395 = VECTOR('',#7396,1.); +#7396 = DIRECTION('',(1.,0.,0.)); +#7397 = ORIENTED_EDGE('',*,*,#7398,.F.); +#7398 = EDGE_CURVE('',#7336,#7391,#7399,.T.); +#7399 = LINE('',#7400,#7401); +#7400 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7401 = VECTOR('',#7402,1.); +#7402 = DIRECTION('',(1.,0.,0.)); +#7403 = PLANE('',#7404); +#7404 = AXIS2_PLACEMENT_3D('',#7405,#7406,#7407); +#7405 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7406 = DIRECTION('',(0.,1.,0.)); +#7407 = DIRECTION('',(0.,-0.,1.)); +#7408 = ADVANCED_FACE('',(#7409),#7427,.T.); +#7409 = FACE_BOUND('',#7410,.T.); +#7410 = EDGE_LOOP('',(#7411,#7412,#7413,#7421)); +#7411 = ORIENTED_EDGE('',*,*,#7311,.T.); +#7412 = ORIENTED_EDGE('',*,*,#7256,.T.); +#7413 = ORIENTED_EDGE('',*,*,#7414,.F.); +#7414 = EDGE_CURVE('',#7415,#7257,#7417,.T.); +#7415 = VERTEX_POINT('',#7416); +#7416 = CARTESIAN_POINT('',(0.45,0.4,1.1)); +#7417 = LINE('',#7418,#7419); +#7418 = CARTESIAN_POINT('',(0.45,0.4,1.1)); +#7419 = VECTOR('',#7420,1.); +#7420 = DIRECTION('',(0.,-1.,0.)); +#7421 = ORIENTED_EDGE('',*,*,#7422,.F.); +#7422 = EDGE_CURVE('',#7312,#7415,#7423,.T.); +#7423 = LINE('',#7424,#7425); +#7424 = CARTESIAN_POINT('',(-0.45,0.4,1.1)); +#7425 = VECTOR('',#7426,1.); +#7426 = DIRECTION('',(1.,0.,0.)); +#7427 = PLANE('',#7428); +#7428 = AXIS2_PLACEMENT_3D('',#7429,#7430,#7431); +#7429 = CARTESIAN_POINT('',(-0.45,0.4,1.1)); +#7430 = DIRECTION('',(0.,0.,1.)); +#7431 = DIRECTION('',(1.,0.,-0.)); +#7432 = ADVANCED_FACE('',(#7433),#7467,.T.); +#7433 = FACE_BOUND('',#7434,.T.); +#7434 = EDGE_LOOP('',(#7435,#7436,#7437,#7445,#7453,#7461)); +#7435 = ORIENTED_EDGE('',*,*,#7414,.T.); +#7436 = ORIENTED_EDGE('',*,*,#7264,.T.); +#7437 = ORIENTED_EDGE('',*,*,#7438,.F.); +#7438 = EDGE_CURVE('',#7439,#7265,#7441,.T.); +#7439 = VERTEX_POINT('',#7440); +#7440 = CARTESIAN_POINT('',(0.5,-0.3,0.47)); +#7441 = LINE('',#7442,#7443); +#7442 = CARTESIAN_POINT('',(0.5,0.4,0.47)); +#7443 = VECTOR('',#7444,1.); +#7444 = DIRECTION('',(0.,-1.,0.)); +#7445 = ORIENTED_EDGE('',*,*,#7446,.T.); +#7446 = EDGE_CURVE('',#7439,#7447,#7449,.T.); +#7447 = VERTEX_POINT('',#7448); +#7448 = CARTESIAN_POINT('',(0.5,0.3,0.47)); +#7449 = LINE('',#7450,#7451); +#7450 = CARTESIAN_POINT('',(0.5,-0.4,0.47)); +#7451 = VECTOR('',#7452,1.); +#7452 = DIRECTION('',(0.,1.,0.)); +#7453 = ORIENTED_EDGE('',*,*,#7454,.F.); +#7454 = EDGE_CURVE('',#7455,#7447,#7457,.T.); +#7455 = VERTEX_POINT('',#7456); +#7456 = CARTESIAN_POINT('',(0.5,0.4,0.47)); +#7457 = LINE('',#7458,#7459); +#7458 = CARTESIAN_POINT('',(0.5,0.4,0.47)); +#7459 = VECTOR('',#7460,1.); +#7460 = DIRECTION('',(0.,-1.,0.)); +#7461 = ORIENTED_EDGE('',*,*,#7462,.F.); +#7462 = EDGE_CURVE('',#7415,#7455,#7463,.T.); +#7463 = LINE('',#7464,#7465); +#7464 = CARTESIAN_POINT('',(0.45,0.4,1.1)); +#7465 = VECTOR('',#7466,1.); +#7466 = DIRECTION('',(7.911630099815E-02,0.,-0.996865392576)); +#7467 = PLANE('',#7468); +#7468 = AXIS2_PLACEMENT_3D('',#7469,#7470,#7471); +#7469 = CARTESIAN_POINT('',(0.45,0.4,1.1)); +#7470 = DIRECTION('',(0.996865392576,0.,7.911630099815E-02)); +#7471 = DIRECTION('',(7.911630099815E-02,0.,-0.996865392576)); +#7472 = ADVANCED_FACE('',(#7473),#7498,.T.); +#7473 = FACE_BOUND('',#7474,.T.); +#7474 = EDGE_LOOP('',(#7475,#7483,#7491,#7497)); +#7475 = ORIENTED_EDGE('',*,*,#7476,.F.); +#7476 = EDGE_CURVE('',#7477,#7287,#7479,.T.); +#7477 = VERTEX_POINT('',#7478); +#7478 = CARTESIAN_POINT('',(-0.725,0.4,0.47)); +#7479 = LINE('',#7480,#7481); +#7480 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7481 = VECTOR('',#7482,1.); +#7482 = DIRECTION('',(1.,0.,0.)); +#7483 = ORIENTED_EDGE('',*,*,#7484,.F.); +#7484 = EDGE_CURVE('',#7485,#7477,#7487,.T.); +#7485 = VERTEX_POINT('',#7486); +#7486 = CARTESIAN_POINT('',(-0.725,0.3,0.47)); +#7487 = LINE('',#7488,#7489); +#7488 = CARTESIAN_POINT('',(-0.725,5.E-02,0.47)); +#7489 = VECTOR('',#7490,1.); +#7490 = DIRECTION('',(0.,1.,0.)); +#7491 = ORIENTED_EDGE('',*,*,#7492,.F.); +#7492 = EDGE_CURVE('',#7289,#7485,#7493,.T.); +#7493 = LINE('',#7494,#7495); +#7494 = CARTESIAN_POINT('',(-0.7475,0.3,0.47)); +#7495 = VECTOR('',#7496,1.); +#7496 = DIRECTION('',(-1.,0.,0.)); +#7497 = ORIENTED_EDGE('',*,*,#7286,.F.); +#7498 = PLANE('',#7499); +#7499 = AXIS2_PLACEMENT_3D('',#7500,#7501,#7502); +#7500 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7501 = DIRECTION('',(0.,0.,1.)); +#7502 = DIRECTION('',(1.,0.,-0.)); +#7503 = ADVANCED_FACE('',(#7504),#7515,.T.); +#7504 = FACE_BOUND('',#7505,.T.); +#7505 = EDGE_LOOP('',(#7506,#7507,#7508,#7509)); +#7506 = ORIENTED_EDGE('',*,*,#7319,.T.); +#7507 = ORIENTED_EDGE('',*,*,#7422,.T.); +#7508 = ORIENTED_EDGE('',*,*,#7462,.T.); +#7509 = ORIENTED_EDGE('',*,*,#7510,.T.); +#7510 = EDGE_CURVE('',#7455,#7287,#7511,.T.); +#7511 = LINE('',#7512,#7513); +#7512 = CARTESIAN_POINT('',(0.5,0.4,0.47)); +#7513 = VECTOR('',#7514,1.); +#7514 = DIRECTION('',(-1.,0.,0.)); +#7515 = PLANE('',#7516); +#7516 = AXIS2_PLACEMENT_3D('',#7517,#7518,#7519); +#7517 = CARTESIAN_POINT('',(-8.772411109409E-18,0.4,0.775044128294)); +#7518 = DIRECTION('',(0.,1.,0.)); +#7519 = DIRECTION('',(0.,-0.,1.)); +#7520 = ADVANCED_FACE('',(#7521),#7548,.T.); +#7521 = FACE_BOUND('',#7522,.T.); +#7522 = EDGE_LOOP('',(#7523,#7532,#7540,#7547)); +#7523 = ORIENTED_EDGE('',*,*,#7524,.F.); +#7524 = EDGE_CURVE('',#7525,#7289,#7527,.T.); +#7525 = VERTEX_POINT('',#7526); +#7526 = CARTESIAN_POINT('',(-0.53,0.3,0.5)); +#7527 = CIRCLE('',#7528,3.E-02); +#7528 = AXIS2_PLACEMENT_3D('',#7529,#7530,#7531); +#7529 = CARTESIAN_POINT('',(-0.53,0.3,0.47)); +#7530 = DIRECTION('',(-0.,1.,0.)); +#7531 = DIRECTION('',(1.,0.,0.)); +#7532 = ORIENTED_EDGE('',*,*,#7533,.F.); +#7533 = EDGE_CURVE('',#7534,#7525,#7536,.T.); +#7534 = VERTEX_POINT('',#7535); +#7535 = CARTESIAN_POINT('',(-0.53,-0.3,0.5)); +#7536 = LINE('',#7537,#7538); +#7537 = CARTESIAN_POINT('',(-0.53,-0.4,0.5)); +#7538 = VECTOR('',#7539,1.); +#7539 = DIRECTION('',(0.,1.,0.)); +#7540 = ORIENTED_EDGE('',*,*,#7541,.T.); +#7541 = EDGE_CURVE('',#7534,#7297,#7542,.T.); +#7542 = CIRCLE('',#7543,3.E-02); +#7543 = AXIS2_PLACEMENT_3D('',#7544,#7545,#7546); +#7544 = CARTESIAN_POINT('',(-0.53,-0.3,0.47)); +#7545 = DIRECTION('',(-0.,1.,0.)); +#7546 = DIRECTION('',(1.,0.,0.)); +#7547 = ORIENTED_EDGE('',*,*,#7296,.T.); +#7548 = CYLINDRICAL_SURFACE('',#7549,3.E-02); +#7549 = AXIS2_PLACEMENT_3D('',#7550,#7551,#7552); +#7550 = CARTESIAN_POINT('',(-0.53,-0.4,0.47)); +#7551 = DIRECTION('',(0.,1.,0.)); +#7552 = DIRECTION('',(1.,0.,0.)); +#7553 = ADVANCED_FACE('',(#7554),#7572,.T.); +#7554 = FACE_BOUND('',#7555,.T.); +#7555 = EDGE_LOOP('',(#7556,#7564,#7565,#7566)); +#7556 = ORIENTED_EDGE('',*,*,#7557,.F.); +#7557 = EDGE_CURVE('',#7352,#7558,#7560,.T.); +#7558 = VERTEX_POINT('',#7559); +#7559 = CARTESIAN_POINT('',(-0.725,-0.3,0.47)); +#7560 = LINE('',#7561,#7562); +#7561 = CARTESIAN_POINT('',(-0.725,-0.35,0.47)); +#7562 = VECTOR('',#7563,1.); +#7563 = DIRECTION('',(0.,1.,0.)); +#7564 = ORIENTED_EDGE('',*,*,#7359,.T.); +#7565 = ORIENTED_EDGE('',*,*,#7304,.F.); +#7566 = ORIENTED_EDGE('',*,*,#7567,.F.); +#7567 = EDGE_CURVE('',#7558,#7297,#7568,.T.); +#7568 = LINE('',#7569,#7570); +#7569 = CARTESIAN_POINT('',(-2.25E-02,-0.3,0.47)); +#7570 = VECTOR('',#7571,1.); +#7571 = DIRECTION('',(1.,0.,0.)); +#7572 = PLANE('',#7573); +#7573 = AXIS2_PLACEMENT_3D('',#7574,#7575,#7576); +#7574 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7575 = DIRECTION('',(0.,0.,1.)); +#7576 = DIRECTION('',(1.,0.,-0.)); +#7577 = ADVANCED_FACE('',(#7578),#7639,.F.); +#7578 = FACE_BOUND('',#7579,.F.); +#7579 = EDGE_LOOP('',(#7580,#7590,#7599,#7607,#7616,#7624,#7630,#7631, + #7632,#7633)); +#7580 = ORIENTED_EDGE('',*,*,#7581,.F.); +#7581 = EDGE_CURVE('',#7582,#7584,#7586,.T.); +#7582 = VERTEX_POINT('',#7583); +#7583 = CARTESIAN_POINT('',(-0.77,-0.4,-3.469446951954E-18)); +#7584 = VERTEX_POINT('',#7585); +#7585 = CARTESIAN_POINT('',(-0.725,-0.4,0.)); +#7586 = LINE('',#7587,#7588); +#7587 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#7588 = VECTOR('',#7589,1.); +#7589 = DIRECTION('',(1.,0.,0.)); +#7590 = ORIENTED_EDGE('',*,*,#7591,.F.); +#7591 = EDGE_CURVE('',#7592,#7582,#7594,.T.); +#7592 = VERTEX_POINT('',#7593); +#7593 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#7594 = CIRCLE('',#7595,3.E-02); +#7595 = AXIS2_PLACEMENT_3D('',#7596,#7597,#7598); +#7596 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7597 = DIRECTION('',(0.,-1.,0.)); +#7598 = DIRECTION('',(0.,0.,1.)); +#7599 = ORIENTED_EDGE('',*,*,#7600,.T.); +#7600 = EDGE_CURVE('',#7592,#7601,#7603,.T.); +#7601 = VERTEX_POINT('',#7602); +#7602 = CARTESIAN_POINT('',(-0.8,-0.4,0.47)); +#7603 = LINE('',#7604,#7605); +#7604 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#7605 = VECTOR('',#7606,1.); +#7606 = DIRECTION('',(0.,0.,1.)); +#7607 = ORIENTED_EDGE('',*,*,#7608,.T.); +#7608 = EDGE_CURVE('',#7601,#7609,#7611,.T.); +#7609 = VERTEX_POINT('',#7610); +#7610 = CARTESIAN_POINT('',(-0.77,-0.4,0.5)); +#7611 = CIRCLE('',#7612,3.E-02); +#7612 = AXIS2_PLACEMENT_3D('',#7613,#7614,#7615); +#7613 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7614 = DIRECTION('',(0.,1.,0.)); +#7615 = DIRECTION('',(0.,-0.,1.)); +#7616 = ORIENTED_EDGE('',*,*,#7617,.T.); +#7617 = EDGE_CURVE('',#7609,#7618,#7620,.T.); +#7618 = VERTEX_POINT('',#7619); +#7619 = CARTESIAN_POINT('',(-0.725,-0.4,0.5)); +#7620 = LINE('',#7621,#7622); +#7621 = CARTESIAN_POINT('',(-0.8,-0.4,0.5)); +#7622 = VECTOR('',#7623,1.); +#7623 = DIRECTION('',(1.,0.,0.)); +#7624 = ORIENTED_EDGE('',*,*,#7625,.F.); +#7625 = EDGE_CURVE('',#7352,#7618,#7626,.T.); +#7626 = LINE('',#7627,#7628); +#7627 = CARTESIAN_POINT('',(-0.725,-0.4,0.375)); +#7628 = VECTOR('',#7629,1.); +#7629 = DIRECTION('',(0.,0.,1.)); +#7630 = ORIENTED_EDGE('',*,*,#7351,.F.); +#7631 = ORIENTED_EDGE('',*,*,#7343,.F.); +#7632 = ORIENTED_EDGE('',*,*,#7333,.T.); +#7633 = ORIENTED_EDGE('',*,*,#7634,.F.); +#7634 = EDGE_CURVE('',#7584,#7336,#7635,.T.); +#7635 = LINE('',#7636,#7637); +#7636 = CARTESIAN_POINT('',(-0.725,-0.4,0.375)); +#7637 = VECTOR('',#7638,1.); +#7638 = DIRECTION('',(0.,0.,1.)); +#7639 = PLANE('',#7640); +#7640 = AXIS2_PLACEMENT_3D('',#7641,#7642,#7643); +#7641 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#7642 = DIRECTION('',(0.,1.,0.)); +#7643 = DIRECTION('',(0.,-0.,1.)); +#7644 = ADVANCED_FACE('',(#7645,#7734),#7760,.F.); +#7645 = FACE_BOUND('',#7646,.F.); +#7646 = EDGE_LOOP('',(#7647,#7655,#7656,#7664,#7672,#7680,#7688,#7696, + #7704,#7712,#7720,#7728)); +#7647 = ORIENTED_EDGE('',*,*,#7648,.F.); +#7648 = EDGE_CURVE('',#7336,#7649,#7651,.T.); +#7649 = VERTEX_POINT('',#7650); +#7650 = CARTESIAN_POINT('',(-0.725,-0.3,3.E-02)); +#7651 = LINE('',#7652,#7653); +#7652 = CARTESIAN_POINT('',(-0.725,-0.35,3.E-02)); +#7653 = VECTOR('',#7654,1.); +#7654 = DIRECTION('',(0.,1.,0.)); +#7655 = ORIENTED_EDGE('',*,*,#7398,.T.); +#7656 = ORIENTED_EDGE('',*,*,#7657,.F.); +#7657 = EDGE_CURVE('',#7658,#7391,#7660,.T.); +#7658 = VERTEX_POINT('',#7659); +#7659 = CARTESIAN_POINT('',(0.725,-0.3,3.E-02)); +#7660 = LINE('',#7661,#7662); +#7661 = CARTESIAN_POINT('',(0.725,-0.45,3.E-02)); +#7662 = VECTOR('',#7663,1.); +#7663 = DIRECTION('',(0.,-1.,0.)); +#7664 = ORIENTED_EDGE('',*,*,#7665,.F.); +#7665 = EDGE_CURVE('',#7666,#7658,#7668,.T.); +#7666 = VERTEX_POINT('',#7667); +#7667 = CARTESIAN_POINT('',(0.5,-0.3,3.E-02)); +#7668 = LINE('',#7669,#7670); +#7669 = CARTESIAN_POINT('',(-2.25E-02,-0.3,3.E-02)); +#7670 = VECTOR('',#7671,1.); +#7671 = DIRECTION('',(1.,0.,0.)); +#7672 = ORIENTED_EDGE('',*,*,#7673,.T.); +#7673 = EDGE_CURVE('',#7666,#7674,#7676,.T.); +#7674 = VERTEX_POINT('',#7675); +#7675 = CARTESIAN_POINT('',(0.5,0.3,3.E-02)); +#7676 = LINE('',#7677,#7678); +#7677 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#7678 = VECTOR('',#7679,1.); +#7679 = DIRECTION('',(0.,1.,0.)); +#7680 = ORIENTED_EDGE('',*,*,#7681,.F.); +#7681 = EDGE_CURVE('',#7682,#7674,#7684,.T.); +#7682 = VERTEX_POINT('',#7683); +#7683 = CARTESIAN_POINT('',(0.725,0.3,3.E-02)); +#7684 = LINE('',#7685,#7686); +#7685 = CARTESIAN_POINT('',(-0.7475,0.3,3.E-02)); +#7686 = VECTOR('',#7687,1.); +#7687 = DIRECTION('',(-1.,0.,0.)); +#7688 = ORIENTED_EDGE('',*,*,#7689,.F.); +#7689 = EDGE_CURVE('',#7690,#7682,#7692,.T.); +#7690 = VERTEX_POINT('',#7691); +#7691 = CARTESIAN_POINT('',(0.725,0.4,3.E-02)); +#7692 = LINE('',#7693,#7694); +#7693 = CARTESIAN_POINT('',(0.725,-5.E-02,3.E-02)); +#7694 = VECTOR('',#7695,1.); +#7695 = DIRECTION('',(0.,-1.,0.)); +#7696 = ORIENTED_EDGE('',*,*,#7697,.F.); +#7697 = EDGE_CURVE('',#7698,#7690,#7700,.T.); +#7698 = VERTEX_POINT('',#7699); +#7699 = CARTESIAN_POINT('',(-0.725,0.4,3.E-02)); +#7700 = LINE('',#7701,#7702); +#7701 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7702 = VECTOR('',#7703,1.); +#7703 = DIRECTION('',(1.,0.,0.)); +#7704 = ORIENTED_EDGE('',*,*,#7705,.F.); +#7705 = EDGE_CURVE('',#7706,#7698,#7708,.T.); +#7706 = VERTEX_POINT('',#7707); +#7707 = CARTESIAN_POINT('',(-0.725,0.3,3.E-02)); +#7708 = LINE('',#7709,#7710); +#7709 = CARTESIAN_POINT('',(-0.725,5.E-02,3.E-02)); +#7710 = VECTOR('',#7711,1.); +#7711 = DIRECTION('',(0.,1.,0.)); +#7712 = ORIENTED_EDGE('',*,*,#7713,.F.); +#7713 = EDGE_CURVE('',#7714,#7706,#7716,.T.); +#7714 = VERTEX_POINT('',#7715); +#7715 = CARTESIAN_POINT('',(-0.5,0.3,3.E-02)); +#7716 = LINE('',#7717,#7718); +#7717 = CARTESIAN_POINT('',(-0.7475,0.3,3.E-02)); +#7718 = VECTOR('',#7719,1.); +#7719 = DIRECTION('',(-1.,0.,0.)); +#7720 = ORIENTED_EDGE('',*,*,#7721,.F.); +#7721 = EDGE_CURVE('',#7722,#7714,#7724,.T.); +#7722 = VERTEX_POINT('',#7723); +#7723 = CARTESIAN_POINT('',(-0.5,-0.3,3.E-02)); +#7724 = LINE('',#7725,#7726); +#7725 = CARTESIAN_POINT('',(-0.5,-0.4,3.E-02)); +#7726 = VECTOR('',#7727,1.); +#7727 = DIRECTION('',(0.,1.,0.)); +#7728 = ORIENTED_EDGE('',*,*,#7729,.F.); +#7729 = EDGE_CURVE('',#7649,#7722,#7730,.T.); +#7730 = LINE('',#7731,#7732); +#7731 = CARTESIAN_POINT('',(-2.25E-02,-0.3,3.E-02)); +#7732 = VECTOR('',#7733,1.); +#7733 = DIRECTION('',(1.,0.,0.)); +#7734 = FACE_BOUND('',#7735,.F.); +#7735 = EDGE_LOOP('',(#7736,#7746,#7754)); +#7736 = ORIENTED_EDGE('',*,*,#7737,.T.); +#7737 = EDGE_CURVE('',#7738,#7740,#7742,.T.); +#7738 = VERTEX_POINT('',#7739); +#7739 = CARTESIAN_POINT('',(0.277128129211,0.32,3.E-02)); +#7740 = VERTEX_POINT('',#7741); +#7741 = CARTESIAN_POINT('',(0.277128129211,-0.32,3.E-02)); +#7742 = LINE('',#7743,#7744); +#7743 = CARTESIAN_POINT('',(0.277128129211,0.32,3.E-02)); +#7744 = VECTOR('',#7745,1.); +#7745 = DIRECTION('',(0.,-1.,0.)); +#7746 = ORIENTED_EDGE('',*,*,#7747,.T.); +#7747 = EDGE_CURVE('',#7740,#7748,#7750,.T.); +#7748 = VERTEX_POINT('',#7749); +#7749 = CARTESIAN_POINT('',(-0.277128129211,0.,3.E-02)); +#7750 = LINE('',#7751,#7752); +#7751 = CARTESIAN_POINT('',(0.277128129211,-0.32,3.E-02)); +#7752 = VECTOR('',#7753,1.); +#7753 = DIRECTION('',(-0.866025403784,0.5,0.)); +#7754 = ORIENTED_EDGE('',*,*,#7755,.T.); +#7755 = EDGE_CURVE('',#7748,#7738,#7756,.T.); +#7756 = LINE('',#7757,#7758); +#7757 = CARTESIAN_POINT('',(-0.277128129211,0.,3.E-02)); +#7758 = VECTOR('',#7759,1.); +#7759 = DIRECTION('',(0.866025403784,0.5,0.)); +#7760 = PLANE('',#7761); +#7761 = AXIS2_PLACEMENT_3D('',#7762,#7763,#7764); +#7762 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#7763 = DIRECTION('',(0.,0.,1.)); +#7764 = DIRECTION('',(1.,0.,-0.)); +#7765 = ADVANCED_FACE('',(#7766),#7827,.F.); +#7766 = FACE_BOUND('',#7767,.F.); +#7767 = EDGE_LOOP('',(#7768,#7778,#7784,#7785,#7786,#7787,#7795,#7803, + #7812,#7820)); +#7768 = ORIENTED_EDGE('',*,*,#7769,.F.); +#7769 = EDGE_CURVE('',#7770,#7772,#7774,.T.); +#7770 = VERTEX_POINT('',#7771); +#7771 = CARTESIAN_POINT('',(0.725,-0.4,0.)); +#7772 = VERTEX_POINT('',#7773); +#7773 = CARTESIAN_POINT('',(0.77,-0.4,-3.469446951954E-18)); +#7774 = LINE('',#7775,#7776); +#7775 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#7776 = VECTOR('',#7777,1.); +#7777 = DIRECTION('',(1.,0.,0.)); +#7778 = ORIENTED_EDGE('',*,*,#7779,.F.); +#7779 = EDGE_CURVE('',#7391,#7770,#7780,.T.); +#7780 = LINE('',#7781,#7782); +#7781 = CARTESIAN_POINT('',(0.725,-0.4,0.375)); +#7782 = VECTOR('',#7783,1.); +#7783 = DIRECTION('',(0.,0.,-1.)); +#7784 = ORIENTED_EDGE('',*,*,#7390,.T.); +#7785 = ORIENTED_EDGE('',*,*,#7382,.T.); +#7786 = ORIENTED_EDGE('',*,*,#7374,.F.); +#7787 = ORIENTED_EDGE('',*,*,#7788,.F.); +#7788 = EDGE_CURVE('',#7789,#7367,#7791,.T.); +#7789 = VERTEX_POINT('',#7790); +#7790 = CARTESIAN_POINT('',(0.725,-0.4,0.5)); +#7791 = LINE('',#7792,#7793); +#7792 = CARTESIAN_POINT('',(0.725,-0.4,0.375)); +#7793 = VECTOR('',#7794,1.); +#7794 = DIRECTION('',(0.,0.,-1.)); +#7795 = ORIENTED_EDGE('',*,*,#7796,.T.); +#7796 = EDGE_CURVE('',#7789,#7797,#7799,.T.); +#7797 = VERTEX_POINT('',#7798); +#7798 = CARTESIAN_POINT('',(0.77,-0.4,0.5)); +#7799 = LINE('',#7800,#7801); +#7800 = CARTESIAN_POINT('',(0.5,-0.4,0.5)); +#7801 = VECTOR('',#7802,1.); +#7802 = DIRECTION('',(1.,0.,0.)); +#7803 = ORIENTED_EDGE('',*,*,#7804,.F.); +#7804 = EDGE_CURVE('',#7805,#7797,#7807,.T.); +#7805 = VERTEX_POINT('',#7806); +#7806 = CARTESIAN_POINT('',(0.8,-0.4,0.47)); +#7807 = CIRCLE('',#7808,3.E-02); +#7808 = AXIS2_PLACEMENT_3D('',#7809,#7810,#7811); +#7809 = CARTESIAN_POINT('',(0.77,-0.4,0.47)); +#7810 = DIRECTION('',(0.,-1.,0.)); +#7811 = DIRECTION('',(0.,0.,1.)); +#7812 = ORIENTED_EDGE('',*,*,#7813,.F.); +#7813 = EDGE_CURVE('',#7814,#7805,#7816,.T.); +#7814 = VERTEX_POINT('',#7815); +#7815 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#7816 = LINE('',#7817,#7818); +#7817 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#7818 = VECTOR('',#7819,1.); +#7819 = DIRECTION('',(0.,0.,1.)); +#7820 = ORIENTED_EDGE('',*,*,#7821,.T.); +#7821 = EDGE_CURVE('',#7814,#7772,#7822,.T.); +#7822 = CIRCLE('',#7823,3.E-02); +#7823 = AXIS2_PLACEMENT_3D('',#7824,#7825,#7826); +#7824 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02)); +#7825 = DIRECTION('',(0.,1.,0.)); +#7826 = DIRECTION('',(0.,-0.,1.)); +#7827 = PLANE('',#7828); +#7828 = AXIS2_PLACEMENT_3D('',#7829,#7830,#7831); +#7829 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#7830 = DIRECTION('',(0.,1.,0.)); +#7831 = DIRECTION('',(0.,-0.,1.)); +#7832 = ADVANCED_FACE('',(#7833),#7851,.T.); +#7833 = FACE_BOUND('',#7834,.T.); +#7834 = EDGE_LOOP('',(#7835,#7843,#7844,#7845)); +#7835 = ORIENTED_EDGE('',*,*,#7836,.F.); +#7836 = EDGE_CURVE('',#7439,#7837,#7839,.T.); +#7837 = VERTEX_POINT('',#7838); +#7838 = CARTESIAN_POINT('',(0.725,-0.3,0.47)); +#7839 = LINE('',#7840,#7841); +#7840 = CARTESIAN_POINT('',(-2.25E-02,-0.3,0.47)); +#7841 = VECTOR('',#7842,1.); +#7842 = DIRECTION('',(1.,0.,0.)); +#7843 = ORIENTED_EDGE('',*,*,#7438,.T.); +#7844 = ORIENTED_EDGE('',*,*,#7366,.T.); +#7845 = ORIENTED_EDGE('',*,*,#7846,.F.); +#7846 = EDGE_CURVE('',#7837,#7367,#7847,.T.); +#7847 = LINE('',#7848,#7849); +#7848 = CARTESIAN_POINT('',(0.725,-0.45,0.47)); +#7849 = VECTOR('',#7850,1.); +#7850 = DIRECTION('',(0.,-1.,0.)); +#7851 = PLANE('',#7852); +#7852 = AXIS2_PLACEMENT_3D('',#7853,#7854,#7855); +#7853 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7854 = DIRECTION('',(0.,0.,1.)); +#7855 = DIRECTION('',(1.,0.,-0.)); +#7856 = ADVANCED_FACE('',(#7857),#7882,.T.); +#7857 = FACE_BOUND('',#7858,.T.); +#7858 = EDGE_LOOP('',(#7859,#7867,#7868,#7876)); +#7859 = ORIENTED_EDGE('',*,*,#7860,.F.); +#7860 = EDGE_CURVE('',#7455,#7861,#7863,.T.); +#7861 = VERTEX_POINT('',#7862); +#7862 = CARTESIAN_POINT('',(0.725,0.4,0.47)); +#7863 = LINE('',#7864,#7865); +#7864 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7865 = VECTOR('',#7866,1.); +#7866 = DIRECTION('',(1.,0.,0.)); +#7867 = ORIENTED_EDGE('',*,*,#7454,.T.); +#7868 = ORIENTED_EDGE('',*,*,#7869,.F.); +#7869 = EDGE_CURVE('',#7870,#7447,#7872,.T.); +#7870 = VERTEX_POINT('',#7871); +#7871 = CARTESIAN_POINT('',(0.725,0.3,0.47)); +#7872 = LINE('',#7873,#7874); +#7873 = CARTESIAN_POINT('',(-0.7475,0.3,0.47)); +#7874 = VECTOR('',#7875,1.); +#7875 = DIRECTION('',(-1.,0.,0.)); +#7876 = ORIENTED_EDGE('',*,*,#7877,.F.); +#7877 = EDGE_CURVE('',#7861,#7870,#7878,.T.); +#7878 = LINE('',#7879,#7880); +#7879 = CARTESIAN_POINT('',(0.725,-5.E-02,0.47)); +#7880 = VECTOR('',#7881,1.); +#7881 = DIRECTION('',(0.,-1.,0.)); +#7882 = PLANE('',#7883); +#7883 = AXIS2_PLACEMENT_3D('',#7884,#7885,#7886); +#7884 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#7885 = DIRECTION('',(0.,0.,1.)); +#7886 = DIRECTION('',(1.,0.,-0.)); +#7887 = ADVANCED_FACE('',(#7888),#7915,.T.); +#7888 = FACE_BOUND('',#7889,.T.); +#7889 = EDGE_LOOP('',(#7890,#7891,#7900,#7908)); +#7890 = ORIENTED_EDGE('',*,*,#7446,.F.); +#7891 = ORIENTED_EDGE('',*,*,#7892,.T.); +#7892 = EDGE_CURVE('',#7439,#7893,#7895,.T.); +#7893 = VERTEX_POINT('',#7894); +#7894 = CARTESIAN_POINT('',(0.53,-0.3,0.5)); +#7895 = CIRCLE('',#7896,3.E-02); +#7896 = AXIS2_PLACEMENT_3D('',#7897,#7898,#7899); +#7897 = CARTESIAN_POINT('',(0.53,-0.3,0.47)); +#7898 = DIRECTION('',(0.,1.,-0.)); +#7899 = DIRECTION('',(-1.,0.,0.)); +#7900 = ORIENTED_EDGE('',*,*,#7901,.T.); +#7901 = EDGE_CURVE('',#7893,#7902,#7904,.T.); +#7902 = VERTEX_POINT('',#7903); +#7903 = CARTESIAN_POINT('',(0.53,0.3,0.5)); +#7904 = LINE('',#7905,#7906); +#7905 = CARTESIAN_POINT('',(0.53,-0.4,0.5)); +#7906 = VECTOR('',#7907,1.); +#7907 = DIRECTION('',(0.,1.,0.)); +#7908 = ORIENTED_EDGE('',*,*,#7909,.F.); +#7909 = EDGE_CURVE('',#7447,#7902,#7910,.T.); +#7910 = CIRCLE('',#7911,3.E-02); +#7911 = AXIS2_PLACEMENT_3D('',#7912,#7913,#7914); +#7912 = CARTESIAN_POINT('',(0.53,0.3,0.47)); +#7913 = DIRECTION('',(0.,1.,-0.)); +#7914 = DIRECTION('',(-1.,0.,0.)); +#7915 = CYLINDRICAL_SURFACE('',#7916,3.E-02); +#7916 = AXIS2_PLACEMENT_3D('',#7917,#7918,#7919); +#7917 = CARTESIAN_POINT('',(0.53,-0.4,0.47)); +#7918 = DIRECTION('',(0.,1.,0.)); +#7919 = DIRECTION('',(-1.,0.,0.)); +#7920 = ADVANCED_FACE('',(#7921),#7971,.T.); +#7921 = FACE_BOUND('',#7922,.T.); +#7922 = EDGE_LOOP('',(#7923,#7931,#7939,#7945,#7946,#7947,#7948,#7956, + #7964,#7970)); +#7923 = ORIENTED_EDGE('',*,*,#7924,.F.); +#7924 = EDGE_CURVE('',#7925,#7698,#7927,.T.); +#7925 = VERTEX_POINT('',#7926); +#7926 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7927 = LINE('',#7928,#7929); +#7928 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7929 = VECTOR('',#7930,1.); +#7930 = DIRECTION('',(1.,0.,0.)); +#7931 = ORIENTED_EDGE('',*,*,#7932,.T.); +#7932 = EDGE_CURVE('',#7925,#7933,#7935,.T.); +#7933 = VERTEX_POINT('',#7934); +#7934 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7935 = LINE('',#7936,#7937); +#7936 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7937 = VECTOR('',#7938,1.); +#7938 = DIRECTION('',(0.,0.,1.)); +#7939 = ORIENTED_EDGE('',*,*,#7940,.T.); +#7940 = EDGE_CURVE('',#7933,#7477,#7941,.T.); +#7941 = LINE('',#7942,#7943); +#7942 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7943 = VECTOR('',#7944,1.); +#7944 = DIRECTION('',(1.,0.,0.)); +#7945 = ORIENTED_EDGE('',*,*,#7476,.T.); +#7946 = ORIENTED_EDGE('',*,*,#7510,.F.); +#7947 = ORIENTED_EDGE('',*,*,#7860,.T.); +#7948 = ORIENTED_EDGE('',*,*,#7949,.T.); +#7949 = EDGE_CURVE('',#7861,#7950,#7952,.T.); +#7950 = VERTEX_POINT('',#7951); +#7951 = CARTESIAN_POINT('',(0.77,0.4,0.47)); +#7952 = LINE('',#7953,#7954); +#7953 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#7954 = VECTOR('',#7955,1.); +#7955 = DIRECTION('',(1.,0.,0.)); +#7956 = ORIENTED_EDGE('',*,*,#7957,.F.); +#7957 = EDGE_CURVE('',#7958,#7950,#7960,.T.); +#7958 = VERTEX_POINT('',#7959); +#7959 = CARTESIAN_POINT('',(0.77,0.4,3.E-02)); +#7960 = LINE('',#7961,#7962); +#7961 = CARTESIAN_POINT('',(0.77,0.4,3.E-02)); +#7962 = VECTOR('',#7963,1.); +#7963 = DIRECTION('',(0.,0.,1.)); +#7964 = ORIENTED_EDGE('',*,*,#7965,.F.); +#7965 = EDGE_CURVE('',#7690,#7958,#7966,.T.); +#7966 = LINE('',#7967,#7968); +#7967 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7968 = VECTOR('',#7969,1.); +#7969 = DIRECTION('',(1.,0.,0.)); +#7970 = ORIENTED_EDGE('',*,*,#7697,.F.); +#7971 = PLANE('',#7972); +#7972 = AXIS2_PLACEMENT_3D('',#7973,#7974,#7975); +#7973 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#7974 = DIRECTION('',(0.,1.,0.)); +#7975 = DIRECTION('',(0.,-0.,1.)); +#7976 = ADVANCED_FACE('',(#7977),#7995,.F.); +#7977 = FACE_BOUND('',#7978,.F.); +#7978 = EDGE_LOOP('',(#7979,#7987,#7993,#7994)); +#7979 = ORIENTED_EDGE('',*,*,#7980,.F.); +#7980 = EDGE_CURVE('',#7981,#7525,#7983,.T.); +#7981 = VERTEX_POINT('',#7982); +#7982 = CARTESIAN_POINT('',(-0.725,0.3,0.5)); +#7983 = LINE('',#7984,#7985); +#7984 = CARTESIAN_POINT('',(-0.7625,0.3,0.5)); +#7985 = VECTOR('',#7986,1.); +#7986 = DIRECTION('',(1.,0.,0.)); +#7987 = ORIENTED_EDGE('',*,*,#7988,.T.); +#7988 = EDGE_CURVE('',#7981,#7485,#7989,.T.); +#7989 = LINE('',#7990,#7991); +#7990 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#7991 = VECTOR('',#7992,1.); +#7992 = DIRECTION('',(-0.,-0.,-1.)); +#7993 = ORIENTED_EDGE('',*,*,#7492,.F.); +#7994 = ORIENTED_EDGE('',*,*,#7524,.F.); +#7995 = PLANE('',#7996); +#7996 = AXIS2_PLACEMENT_3D('',#7997,#7998,#7999); +#7997 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#7998 = DIRECTION('',(0.,-1.,0.)); +#7999 = DIRECTION('',(1.,0.,0.)); +#8000 = ADVANCED_FACE('',(#8001),#8019,.F.); +#8001 = FACE_BOUND('',#8002,.F.); +#8002 = EDGE_LOOP('',(#8003,#8004,#8012,#8018)); +#8003 = ORIENTED_EDGE('',*,*,#7988,.F.); +#8004 = ORIENTED_EDGE('',*,*,#8005,.F.); +#8005 = EDGE_CURVE('',#8006,#7981,#8008,.T.); +#8006 = VERTEX_POINT('',#8007); +#8007 = CARTESIAN_POINT('',(-0.725,0.4,0.5)); +#8008 = LINE('',#8009,#8010); +#8009 = CARTESIAN_POINT('',(-0.725,5.E-02,0.5)); +#8010 = VECTOR('',#8011,1.); +#8011 = DIRECTION('',(0.,-1.,0.)); +#8012 = ORIENTED_EDGE('',*,*,#8013,.F.); +#8013 = EDGE_CURVE('',#7477,#8006,#8014,.T.); +#8014 = LINE('',#8015,#8016); +#8015 = CARTESIAN_POINT('',(-0.725,0.4,0.375)); +#8016 = VECTOR('',#8017,1.); +#8017 = DIRECTION('',(0.,0.,1.)); +#8018 = ORIENTED_EDGE('',*,*,#7484,.F.); +#8019 = PLANE('',#8020); +#8020 = AXIS2_PLACEMENT_3D('',#8021,#8022,#8023); +#8021 = CARTESIAN_POINT('',(-0.725,0.5,0.75)); +#8022 = DIRECTION('',(-1.,0.,0.)); +#8023 = DIRECTION('',(0.,-1.,0.)); +#8024 = ADVANCED_FACE('',(#8025),#8043,.F.); +#8025 = FACE_BOUND('',#8026,.F.); +#8026 = EDGE_LOOP('',(#8027,#8035,#8041,#8042)); +#8027 = ORIENTED_EDGE('',*,*,#8028,.F.); +#8028 = EDGE_CURVE('',#8029,#7558,#8031,.T.); +#8029 = VERTEX_POINT('',#8030); +#8030 = CARTESIAN_POINT('',(-0.725,-0.3,0.5)); +#8031 = LINE('',#8032,#8033); +#8032 = CARTESIAN_POINT('',(-0.725,-0.3,0.75)); +#8033 = VECTOR('',#8034,1.); +#8034 = DIRECTION('',(-0.,-0.,-1.)); +#8035 = ORIENTED_EDGE('',*,*,#8036,.F.); +#8036 = EDGE_CURVE('',#7534,#8029,#8037,.T.); +#8037 = LINE('',#8038,#8039); +#8038 = CARTESIAN_POINT('',(-3.75E-02,-0.3,0.5)); +#8039 = VECTOR('',#8040,1.); +#8040 = DIRECTION('',(-1.,0.,0.)); +#8041 = ORIENTED_EDGE('',*,*,#7541,.T.); +#8042 = ORIENTED_EDGE('',*,*,#7567,.F.); +#8043 = PLANE('',#8044); +#8044 = AXIS2_PLACEMENT_3D('',#8045,#8046,#8047); +#8045 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8046 = DIRECTION('',(0.,1.,0.)); +#8047 = DIRECTION('',(-1.,0.,0.)); +#8048 = ADVANCED_FACE('',(#8049),#8076,.T.); +#8049 = FACE_BOUND('',#8050,.T.); +#8050 = EDGE_LOOP('',(#8051,#8059,#8065,#8066,#8072,#8073,#8074,#8075)); +#8051 = ORIENTED_EDGE('',*,*,#8052,.F.); +#8052 = EDGE_CURVE('',#8053,#8006,#8055,.T.); +#8053 = VERTEX_POINT('',#8054); +#8054 = CARTESIAN_POINT('',(-0.77,0.4,0.5)); +#8055 = LINE('',#8056,#8057); +#8056 = CARTESIAN_POINT('',(-0.8,0.4,0.5)); +#8057 = VECTOR('',#8058,1.); +#8058 = DIRECTION('',(1.,0.,0.)); +#8059 = ORIENTED_EDGE('',*,*,#8060,.F.); +#8060 = EDGE_CURVE('',#7609,#8053,#8061,.T.); +#8061 = LINE('',#8062,#8063); +#8062 = CARTESIAN_POINT('',(-0.77,-0.4,0.5)); +#8063 = VECTOR('',#8064,1.); +#8064 = DIRECTION('',(0.,1.,0.)); +#8065 = ORIENTED_EDGE('',*,*,#7617,.T.); +#8066 = ORIENTED_EDGE('',*,*,#8067,.F.); +#8067 = EDGE_CURVE('',#8029,#7618,#8068,.T.); +#8068 = LINE('',#8069,#8070); +#8069 = CARTESIAN_POINT('',(-0.725,-0.35,0.5)); +#8070 = VECTOR('',#8071,1.); +#8071 = DIRECTION('',(0.,-1.,0.)); +#8072 = ORIENTED_EDGE('',*,*,#8036,.F.); +#8073 = ORIENTED_EDGE('',*,*,#7533,.T.); +#8074 = ORIENTED_EDGE('',*,*,#7980,.F.); +#8075 = ORIENTED_EDGE('',*,*,#8005,.F.); +#8076 = PLANE('',#8077); +#8077 = AXIS2_PLACEMENT_3D('',#8078,#8079,#8080); +#8078 = CARTESIAN_POINT('',(-0.8,-0.4,0.5)); +#8079 = DIRECTION('',(0.,0.,1.)); +#8080 = DIRECTION('',(1.,0.,-0.)); +#8081 = ADVANCED_FACE('',(#8082),#8088,.F.); +#8082 = FACE_BOUND('',#8083,.F.); +#8083 = EDGE_LOOP('',(#8084,#8085,#8086,#8087)); +#8084 = ORIENTED_EDGE('',*,*,#8067,.F.); +#8085 = ORIENTED_EDGE('',*,*,#8028,.T.); +#8086 = ORIENTED_EDGE('',*,*,#7557,.F.); +#8087 = ORIENTED_EDGE('',*,*,#7625,.T.); +#8088 = PLANE('',#8089); +#8089 = AXIS2_PLACEMENT_3D('',#8090,#8091,#8092); +#8090 = CARTESIAN_POINT('',(-0.725,-0.3,0.75)); +#8091 = DIRECTION('',(-1.,0.,0.)); +#8092 = DIRECTION('',(0.,-1.,0.)); +#8093 = ADVANCED_FACE('',(#8094),#8151,.F.); +#8094 = FACE_BOUND('',#8095,.F.); +#8095 = EDGE_LOOP('',(#8096,#8106,#8112,#8113,#8121,#8129,#8137,#8145)); +#8096 = ORIENTED_EDGE('',*,*,#8097,.F.); +#8097 = EDGE_CURVE('',#8098,#8100,#8102,.T.); +#8098 = VERTEX_POINT('',#8099); +#8099 = CARTESIAN_POINT('',(-0.77,0.4,-3.469446951954E-18)); +#8100 = VERTEX_POINT('',#8101); +#8101 = CARTESIAN_POINT('',(-0.725,0.4,0.)); +#8102 = LINE('',#8103,#8104); +#8103 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#8104 = VECTOR('',#8105,1.); +#8105 = DIRECTION('',(1.,0.,0.)); +#8106 = ORIENTED_EDGE('',*,*,#8107,.F.); +#8107 = EDGE_CURVE('',#7582,#8098,#8108,.T.); +#8108 = LINE('',#8109,#8110); +#8109 = CARTESIAN_POINT('',(-0.77,-0.4,-3.469446951954E-18)); +#8110 = VECTOR('',#8111,1.); +#8111 = DIRECTION('',(0.,1.,0.)); +#8112 = ORIENTED_EDGE('',*,*,#7581,.T.); +#8113 = ORIENTED_EDGE('',*,*,#8114,.F.); +#8114 = EDGE_CURVE('',#8115,#7584,#8117,.T.); +#8115 = VERTEX_POINT('',#8116); +#8116 = CARTESIAN_POINT('',(-0.725,-0.3,0.)); +#8117 = LINE('',#8118,#8119); +#8118 = CARTESIAN_POINT('',(-0.725,-0.35,0.)); +#8119 = VECTOR('',#8120,1.); +#8120 = DIRECTION('',(0.,-1.,0.)); +#8121 = ORIENTED_EDGE('',*,*,#8122,.F.); +#8122 = EDGE_CURVE('',#8123,#8115,#8125,.T.); +#8123 = VERTEX_POINT('',#8124); +#8124 = CARTESIAN_POINT('',(-0.53,-0.3,-3.469446951954E-18)); +#8125 = LINE('',#8126,#8127); +#8126 = CARTESIAN_POINT('',(-3.75E-02,-0.3,0.)); +#8127 = VECTOR('',#8128,1.); +#8128 = DIRECTION('',(-1.,0.,0.)); +#8129 = ORIENTED_EDGE('',*,*,#8130,.T.); +#8130 = EDGE_CURVE('',#8123,#8131,#8133,.T.); +#8131 = VERTEX_POINT('',#8132); +#8132 = CARTESIAN_POINT('',(-0.53,0.3,-3.469446951954E-18)); +#8133 = LINE('',#8134,#8135); +#8134 = CARTESIAN_POINT('',(-0.53,-0.4,-3.469446951954E-18)); +#8135 = VECTOR('',#8136,1.); +#8136 = DIRECTION('',(0.,1.,0.)); +#8137 = ORIENTED_EDGE('',*,*,#8138,.F.); +#8138 = EDGE_CURVE('',#8139,#8131,#8141,.T.); +#8139 = VERTEX_POINT('',#8140); +#8140 = CARTESIAN_POINT('',(-0.725,0.3,0.)); +#8141 = LINE('',#8142,#8143); +#8142 = CARTESIAN_POINT('',(-0.7625,0.3,0.)); +#8143 = VECTOR('',#8144,1.); +#8144 = DIRECTION('',(1.,0.,0.)); +#8145 = ORIENTED_EDGE('',*,*,#8146,.F.); +#8146 = EDGE_CURVE('',#8100,#8139,#8147,.T.); +#8147 = LINE('',#8148,#8149); +#8148 = CARTESIAN_POINT('',(-0.725,5.E-02,0.)); +#8149 = VECTOR('',#8150,1.); +#8150 = DIRECTION('',(0.,-1.,0.)); +#8151 = PLANE('',#8152); +#8152 = AXIS2_PLACEMENT_3D('',#8153,#8154,#8155); +#8153 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#8154 = DIRECTION('',(0.,0.,1.)); +#8155 = DIRECTION('',(1.,0.,-0.)); +#8156 = ADVANCED_FACE('',(#8157),#8176,.T.); +#8157 = FACE_BOUND('',#8158,.T.); +#8158 = EDGE_LOOP('',(#8159,#8167,#8174,#8175)); +#8159 = ORIENTED_EDGE('',*,*,#8160,.T.); +#8160 = EDGE_CURVE('',#7592,#8161,#8163,.T.); +#8161 = VERTEX_POINT('',#8162); +#8162 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#8163 = LINE('',#8164,#8165); +#8164 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#8165 = VECTOR('',#8166,1.); +#8166 = DIRECTION('',(0.,1.,0.)); +#8167 = ORIENTED_EDGE('',*,*,#8168,.T.); +#8168 = EDGE_CURVE('',#8161,#8098,#8169,.T.); +#8169 = CIRCLE('',#8170,3.E-02); +#8170 = AXIS2_PLACEMENT_3D('',#8171,#8172,#8173); +#8171 = CARTESIAN_POINT('',(-0.77,0.4,3.E-02)); +#8172 = DIRECTION('',(0.,-1.,0.)); +#8173 = DIRECTION('',(0.,0.,1.)); +#8174 = ORIENTED_EDGE('',*,*,#8107,.F.); +#8175 = ORIENTED_EDGE('',*,*,#7591,.F.); +#8176 = CYLINDRICAL_SURFACE('',#8177,3.E-02); +#8177 = AXIS2_PLACEMENT_3D('',#8178,#8179,#8180); +#8178 = CARTESIAN_POINT('',(-0.77,-0.4,3.E-02)); +#8179 = DIRECTION('',(0.,1.,0.)); +#8180 = DIRECTION('',(-1.,0.,0.)); +#8181 = ADVANCED_FACE('',(#8182),#8193,.F.); +#8182 = FACE_BOUND('',#8183,.F.); +#8183 = EDGE_LOOP('',(#8184,#8185,#8191,#8192)); +#8184 = ORIENTED_EDGE('',*,*,#7648,.T.); +#8185 = ORIENTED_EDGE('',*,*,#8186,.T.); +#8186 = EDGE_CURVE('',#7649,#8115,#8187,.T.); +#8187 = LINE('',#8188,#8189); +#8188 = CARTESIAN_POINT('',(-0.725,-0.3,0.75)); +#8189 = VECTOR('',#8190,1.); +#8190 = DIRECTION('',(-0.,-0.,-1.)); +#8191 = ORIENTED_EDGE('',*,*,#8114,.T.); +#8192 = ORIENTED_EDGE('',*,*,#7634,.T.); +#8193 = PLANE('',#8194); +#8194 = AXIS2_PLACEMENT_3D('',#8195,#8196,#8197); +#8195 = CARTESIAN_POINT('',(-0.725,-0.3,0.75)); +#8196 = DIRECTION('',(-1.,0.,0.)); +#8197 = DIRECTION('',(0.,-1.,0.)); +#8198 = ADVANCED_FACE('',(#8199),#8217,.F.); +#8199 = FACE_BOUND('',#8200,.F.); +#8200 = EDGE_LOOP('',(#8201,#8202,#8203,#8211)); +#8201 = ORIENTED_EDGE('',*,*,#7600,.F.); +#8202 = ORIENTED_EDGE('',*,*,#8160,.T.); +#8203 = ORIENTED_EDGE('',*,*,#8204,.T.); +#8204 = EDGE_CURVE('',#8161,#8205,#8207,.T.); +#8205 = VERTEX_POINT('',#8206); +#8206 = CARTESIAN_POINT('',(-0.8,0.4,0.47)); +#8207 = LINE('',#8208,#8209); +#8208 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#8209 = VECTOR('',#8210,1.); +#8210 = DIRECTION('',(0.,0.,1.)); +#8211 = ORIENTED_EDGE('',*,*,#8212,.F.); +#8212 = EDGE_CURVE('',#7601,#8205,#8213,.T.); +#8213 = LINE('',#8214,#8215); +#8214 = CARTESIAN_POINT('',(-0.8,-0.4,0.47)); +#8215 = VECTOR('',#8216,1.); +#8216 = DIRECTION('',(0.,1.,0.)); +#8217 = PLANE('',#8218); +#8218 = AXIS2_PLACEMENT_3D('',#8219,#8220,#8221); +#8219 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#8220 = DIRECTION('',(1.,0.,0.)); +#8221 = DIRECTION('',(0.,0.,1.)); +#8222 = ADVANCED_FACE('',(#8223),#8235,.T.); +#8223 = FACE_BOUND('',#8224,.T.); +#8224 = EDGE_LOOP('',(#8225,#8226,#8227,#8234)); +#8225 = ORIENTED_EDGE('',*,*,#7608,.T.); +#8226 = ORIENTED_EDGE('',*,*,#8060,.T.); +#8227 = ORIENTED_EDGE('',*,*,#8228,.F.); +#8228 = EDGE_CURVE('',#8205,#8053,#8229,.T.); +#8229 = CIRCLE('',#8230,3.E-02); +#8230 = AXIS2_PLACEMENT_3D('',#8231,#8232,#8233); +#8231 = CARTESIAN_POINT('',(-0.77,0.4,0.47)); +#8232 = DIRECTION('',(0.,1.,0.)); +#8233 = DIRECTION('',(0.,-0.,1.)); +#8234 = ORIENTED_EDGE('',*,*,#8212,.F.); +#8235 = CYLINDRICAL_SURFACE('',#8236,3.E-02); +#8236 = AXIS2_PLACEMENT_3D('',#8237,#8238,#8239); +#8237 = CARTESIAN_POINT('',(-0.77,-0.4,0.47)); +#8238 = DIRECTION('',(0.,1.,0.)); +#8239 = DIRECTION('',(-1.,0.,0.)); +#8240 = ADVANCED_FACE('',(#8241),#8253,.F.); +#8241 = FACE_BOUND('',#8242,.F.); +#8242 = EDGE_LOOP('',(#8243,#8244,#8245,#8252)); +#8243 = ORIENTED_EDGE('',*,*,#8186,.F.); +#8244 = ORIENTED_EDGE('',*,*,#7729,.T.); +#8245 = ORIENTED_EDGE('',*,*,#8246,.T.); +#8246 = EDGE_CURVE('',#7722,#8123,#8247,.T.); +#8247 = CIRCLE('',#8248,3.E-02); +#8248 = AXIS2_PLACEMENT_3D('',#8249,#8250,#8251); +#8249 = CARTESIAN_POINT('',(-0.53,-0.3,3.E-02)); +#8250 = DIRECTION('',(-0.,1.,0.)); +#8251 = DIRECTION('',(1.,0.,0.)); +#8252 = ORIENTED_EDGE('',*,*,#8122,.T.); +#8253 = PLANE('',#8254); +#8254 = AXIS2_PLACEMENT_3D('',#8255,#8256,#8257); +#8255 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8256 = DIRECTION('',(0.,1.,0.)); +#8257 = DIRECTION('',(-1.,0.,0.)); +#8258 = ADVANCED_FACE('',(#8259),#8271,.T.); +#8259 = FACE_BOUND('',#8260,.T.); +#8260 = EDGE_LOOP('',(#8261,#8262,#8263,#8264)); +#8261 = ORIENTED_EDGE('',*,*,#7721,.F.); +#8262 = ORIENTED_EDGE('',*,*,#8246,.T.); +#8263 = ORIENTED_EDGE('',*,*,#8130,.T.); +#8264 = ORIENTED_EDGE('',*,*,#8265,.F.); +#8265 = EDGE_CURVE('',#7714,#8131,#8266,.T.); +#8266 = CIRCLE('',#8267,3.E-02); +#8267 = AXIS2_PLACEMENT_3D('',#8268,#8269,#8270); +#8268 = CARTESIAN_POINT('',(-0.53,0.3,3.E-02)); +#8269 = DIRECTION('',(-0.,1.,0.)); +#8270 = DIRECTION('',(1.,0.,0.)); +#8271 = CYLINDRICAL_SURFACE('',#8272,3.E-02); +#8272 = AXIS2_PLACEMENT_3D('',#8273,#8274,#8275); +#8273 = CARTESIAN_POINT('',(-0.53,-0.4,3.E-02)); +#8274 = DIRECTION('',(0.,1.,0.)); +#8275 = DIRECTION('',(1.,0.,0.)); +#8276 = ADVANCED_FACE('',(#8277),#8288,.F.); +#8277 = FACE_BOUND('',#8278,.F.); +#8278 = EDGE_LOOP('',(#8279,#8280,#8286,#8287)); +#8279 = ORIENTED_EDGE('',*,*,#7713,.T.); +#8280 = ORIENTED_EDGE('',*,*,#8281,.T.); +#8281 = EDGE_CURVE('',#7706,#8139,#8282,.T.); +#8282 = LINE('',#8283,#8284); +#8283 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#8284 = VECTOR('',#8285,1.); +#8285 = DIRECTION('',(-0.,-0.,-1.)); +#8286 = ORIENTED_EDGE('',*,*,#8138,.T.); +#8287 = ORIENTED_EDGE('',*,*,#8265,.F.); +#8288 = PLANE('',#8289); +#8289 = AXIS2_PLACEMENT_3D('',#8290,#8291,#8292); +#8290 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#8291 = DIRECTION('',(0.,-1.,0.)); +#8292 = DIRECTION('',(1.,0.,0.)); +#8293 = ADVANCED_FACE('',(#8294),#8305,.F.); +#8294 = FACE_BOUND('',#8295,.F.); +#8295 = EDGE_LOOP('',(#8296,#8297,#8298,#8304)); +#8296 = ORIENTED_EDGE('',*,*,#8281,.F.); +#8297 = ORIENTED_EDGE('',*,*,#7705,.T.); +#8298 = ORIENTED_EDGE('',*,*,#8299,.F.); +#8299 = EDGE_CURVE('',#8100,#7698,#8300,.T.); +#8300 = LINE('',#8301,#8302); +#8301 = CARTESIAN_POINT('',(-0.725,0.4,0.375)); +#8302 = VECTOR('',#8303,1.); +#8303 = DIRECTION('',(0.,0.,1.)); +#8304 = ORIENTED_EDGE('',*,*,#8146,.T.); +#8305 = PLANE('',#8306); +#8306 = AXIS2_PLACEMENT_3D('',#8307,#8308,#8309); +#8307 = CARTESIAN_POINT('',(-0.725,0.5,0.75)); +#8308 = DIRECTION('',(-1.,0.,0.)); +#8309 = DIRECTION('',(0.,-1.,0.)); +#8310 = ADVANCED_FACE('',(#8311),#8336,.F.); +#8311 = FACE_BOUND('',#8312,.F.); +#8312 = EDGE_LOOP('',(#8313,#8314,#8322,#8330)); +#8313 = ORIENTED_EDGE('',*,*,#7689,.T.); +#8314 = ORIENTED_EDGE('',*,*,#8315,.T.); +#8315 = EDGE_CURVE('',#7682,#8316,#8318,.T.); +#8316 = VERTEX_POINT('',#8317); +#8317 = CARTESIAN_POINT('',(0.725,0.3,0.)); +#8318 = LINE('',#8319,#8320); +#8319 = CARTESIAN_POINT('',(0.725,0.3,0.75)); +#8320 = VECTOR('',#8321,1.); +#8321 = DIRECTION('',(-0.,-0.,-1.)); +#8322 = ORIENTED_EDGE('',*,*,#8323,.T.); +#8323 = EDGE_CURVE('',#8316,#8324,#8326,.T.); +#8324 = VERTEX_POINT('',#8325); +#8325 = CARTESIAN_POINT('',(0.725,0.4,0.)); +#8326 = LINE('',#8327,#8328); +#8327 = CARTESIAN_POINT('',(0.725,-5.E-02,0.)); +#8328 = VECTOR('',#8329,1.); +#8329 = DIRECTION('',(0.,1.,0.)); +#8330 = ORIENTED_EDGE('',*,*,#8331,.F.); +#8331 = EDGE_CURVE('',#7690,#8324,#8332,.T.); +#8332 = LINE('',#8333,#8334); +#8333 = CARTESIAN_POINT('',(0.725,0.4,0.375)); +#8334 = VECTOR('',#8335,1.); +#8335 = DIRECTION('',(0.,0.,-1.)); +#8336 = PLANE('',#8337); +#8337 = AXIS2_PLACEMENT_3D('',#8338,#8339,#8340); +#8338 = CARTESIAN_POINT('',(0.725,0.3,0.75)); +#8339 = DIRECTION('',(1.,0.,0.)); +#8340 = DIRECTION('',(-0.,1.,0.)); +#8341 = ADVANCED_FACE('',(#8342),#8361,.F.); +#8342 = FACE_BOUND('',#8343,.F.); +#8343 = EDGE_LOOP('',(#8344,#8345,#8346,#8355)); +#8344 = ORIENTED_EDGE('',*,*,#8315,.F.); +#8345 = ORIENTED_EDGE('',*,*,#7681,.T.); +#8346 = ORIENTED_EDGE('',*,*,#8347,.F.); +#8347 = EDGE_CURVE('',#8348,#7674,#8350,.T.); +#8348 = VERTEX_POINT('',#8349); +#8349 = CARTESIAN_POINT('',(0.53,0.3,-3.469446951954E-18)); +#8350 = CIRCLE('',#8351,3.E-02); +#8351 = AXIS2_PLACEMENT_3D('',#8352,#8353,#8354); +#8352 = CARTESIAN_POINT('',(0.53,0.3,3.E-02)); +#8353 = DIRECTION('',(0.,1.,-0.)); +#8354 = DIRECTION('',(-1.,0.,0.)); +#8355 = ORIENTED_EDGE('',*,*,#8356,.T.); +#8356 = EDGE_CURVE('',#8348,#8316,#8357,.T.); +#8357 = LINE('',#8358,#8359); +#8358 = CARTESIAN_POINT('',(-0.1125,0.3,0.)); +#8359 = VECTOR('',#8360,1.); +#8360 = DIRECTION('',(1.,0.,0.)); +#8361 = PLANE('',#8362); +#8362 = AXIS2_PLACEMENT_3D('',#8363,#8364,#8365); +#8363 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#8364 = DIRECTION('',(0.,-1.,0.)); +#8365 = DIRECTION('',(1.,0.,0.)); +#8366 = ADVANCED_FACE('',(#8367),#8386,.T.); +#8367 = FACE_BOUND('',#8368,.T.); +#8368 = EDGE_LOOP('',(#8369,#8370,#8378,#8385)); +#8369 = ORIENTED_EDGE('',*,*,#8347,.F.); +#8370 = ORIENTED_EDGE('',*,*,#8371,.F.); +#8371 = EDGE_CURVE('',#8372,#8348,#8374,.T.); +#8372 = VERTEX_POINT('',#8373); +#8373 = CARTESIAN_POINT('',(0.53,-0.3,-3.469446951954E-18)); +#8374 = LINE('',#8375,#8376); +#8375 = CARTESIAN_POINT('',(0.53,-0.4,-3.469446951954E-18)); +#8376 = VECTOR('',#8377,1.); +#8377 = DIRECTION('',(0.,1.,0.)); +#8378 = ORIENTED_EDGE('',*,*,#8379,.T.); +#8379 = EDGE_CURVE('',#8372,#7666,#8380,.T.); +#8380 = CIRCLE('',#8381,3.E-02); +#8381 = AXIS2_PLACEMENT_3D('',#8382,#8383,#8384); +#8382 = CARTESIAN_POINT('',(0.53,-0.3,3.E-02)); +#8383 = DIRECTION('',(0.,1.,-0.)); +#8384 = DIRECTION('',(-1.,0.,0.)); +#8385 = ORIENTED_EDGE('',*,*,#7673,.T.); +#8386 = CYLINDRICAL_SURFACE('',#8387,3.E-02); +#8387 = AXIS2_PLACEMENT_3D('',#8388,#8389,#8390); +#8388 = CARTESIAN_POINT('',(0.53,-0.4,3.E-02)); +#8389 = DIRECTION('',(0.,1.,0.)); +#8390 = DIRECTION('',(-1.,0.,0.)); +#8391 = ADVANCED_FACE('',(#8392),#8410,.F.); +#8392 = FACE_BOUND('',#8393,.F.); +#8393 = EDGE_LOOP('',(#8394,#8395,#8403,#8409)); +#8394 = ORIENTED_EDGE('',*,*,#7665,.T.); +#8395 = ORIENTED_EDGE('',*,*,#8396,.T.); +#8396 = EDGE_CURVE('',#7658,#8397,#8399,.T.); +#8397 = VERTEX_POINT('',#8398); +#8398 = CARTESIAN_POINT('',(0.725,-0.3,0.)); +#8399 = LINE('',#8400,#8401); +#8400 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8401 = VECTOR('',#8402,1.); +#8402 = DIRECTION('',(-0.,-0.,-1.)); +#8403 = ORIENTED_EDGE('',*,*,#8404,.T.); +#8404 = EDGE_CURVE('',#8397,#8372,#8405,.T.); +#8405 = LINE('',#8406,#8407); +#8406 = CARTESIAN_POINT('',(0.6125,-0.3,0.)); +#8407 = VECTOR('',#8408,1.); +#8408 = DIRECTION('',(-1.,0.,0.)); +#8409 = ORIENTED_EDGE('',*,*,#8379,.T.); +#8410 = PLANE('',#8411); +#8411 = AXIS2_PLACEMENT_3D('',#8412,#8413,#8414); +#8412 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8413 = DIRECTION('',(0.,1.,0.)); +#8414 = DIRECTION('',(-1.,0.,0.)); +#8415 = ADVANCED_FACE('',(#8416),#8427,.F.); +#8416 = FACE_BOUND('',#8417,.F.); +#8417 = EDGE_LOOP('',(#8418,#8419,#8420,#8421)); +#8418 = ORIENTED_EDGE('',*,*,#8396,.F.); +#8419 = ORIENTED_EDGE('',*,*,#7657,.T.); +#8420 = ORIENTED_EDGE('',*,*,#7779,.T.); +#8421 = ORIENTED_EDGE('',*,*,#8422,.T.); +#8422 = EDGE_CURVE('',#7770,#8397,#8423,.T.); +#8423 = LINE('',#8424,#8425); +#8424 = CARTESIAN_POINT('',(0.725,-0.45,0.)); +#8425 = VECTOR('',#8426,1.); +#8426 = DIRECTION('',(0.,1.,0.)); +#8427 = PLANE('',#8428); +#8428 = AXIS2_PLACEMENT_3D('',#8429,#8430,#8431); +#8429 = CARTESIAN_POINT('',(0.725,-0.5,0.75)); +#8430 = DIRECTION('',(1.,0.,0.)); +#8431 = DIRECTION('',(-0.,1.,0.)); +#8432 = ADVANCED_FACE('',(#8433),#8458,.T.); +#8433 = FACE_BOUND('',#8434,.T.); +#8434 = EDGE_LOOP('',(#8435,#8443,#8444,#8452)); +#8435 = ORIENTED_EDGE('',*,*,#8436,.T.); +#8436 = EDGE_CURVE('',#8437,#7738,#8439,.T.); +#8437 = VERTEX_POINT('',#8438); +#8438 = CARTESIAN_POINT('',(0.277128129211,0.32,1.5E-02)); +#8439 = LINE('',#8440,#8441); +#8440 = CARTESIAN_POINT('',(0.277128129211,0.32,1.5E-02)); +#8441 = VECTOR('',#8442,1.); +#8442 = DIRECTION('',(0.,0.,1.)); +#8443 = ORIENTED_EDGE('',*,*,#7737,.T.); +#8444 = ORIENTED_EDGE('',*,*,#8445,.F.); +#8445 = EDGE_CURVE('',#8446,#7740,#8448,.T.); +#8446 = VERTEX_POINT('',#8447); +#8447 = CARTESIAN_POINT('',(0.277128129211,-0.32,1.5E-02)); +#8448 = LINE('',#8449,#8450); +#8449 = CARTESIAN_POINT('',(0.277128129211,-0.32,1.5E-02)); +#8450 = VECTOR('',#8451,1.); +#8451 = DIRECTION('',(0.,0.,1.)); +#8452 = ORIENTED_EDGE('',*,*,#8453,.F.); +#8453 = EDGE_CURVE('',#8437,#8446,#8454,.T.); +#8454 = LINE('',#8455,#8456); +#8455 = CARTESIAN_POINT('',(0.277128129211,0.32,1.5E-02)); +#8456 = VECTOR('',#8457,1.); +#8457 = DIRECTION('',(0.,-1.,0.)); +#8458 = PLANE('',#8459); +#8459 = AXIS2_PLACEMENT_3D('',#8460,#8461,#8462); +#8460 = CARTESIAN_POINT('',(0.277128129211,0.32,1.5E-02)); +#8461 = DIRECTION('',(1.,0.,0.)); +#8462 = DIRECTION('',(0.,-1.,0.)); +#8463 = ADVANCED_FACE('',(#8464),#8482,.T.); +#8464 = FACE_BOUND('',#8465,.T.); +#8465 = EDGE_LOOP('',(#8466,#8474,#8475,#8476)); +#8466 = ORIENTED_EDGE('',*,*,#8467,.T.); +#8467 = EDGE_CURVE('',#8468,#7748,#8470,.T.); +#8468 = VERTEX_POINT('',#8469); +#8469 = CARTESIAN_POINT('',(-0.277128129211,0.,1.5E-02)); +#8470 = LINE('',#8471,#8472); +#8471 = CARTESIAN_POINT('',(-0.277128129211,0.,1.5E-02)); +#8472 = VECTOR('',#8473,1.); +#8473 = DIRECTION('',(0.,0.,1.)); +#8474 = ORIENTED_EDGE('',*,*,#7755,.T.); +#8475 = ORIENTED_EDGE('',*,*,#8436,.F.); +#8476 = ORIENTED_EDGE('',*,*,#8477,.F.); +#8477 = EDGE_CURVE('',#8468,#8437,#8478,.T.); +#8478 = LINE('',#8479,#8480); +#8479 = CARTESIAN_POINT('',(-0.277128129211,0.,1.5E-02)); +#8480 = VECTOR('',#8481,1.); +#8481 = DIRECTION('',(0.866025403784,0.5,0.)); +#8482 = PLANE('',#8483); +#8483 = AXIS2_PLACEMENT_3D('',#8484,#8485,#8486); +#8484 = CARTESIAN_POINT('',(-0.277128129211,0.,1.5E-02)); +#8485 = DIRECTION('',(-0.5,0.866025403784,0.)); +#8486 = DIRECTION('',(0.866025403784,0.5,0.)); +#8487 = ADVANCED_FACE('',(#8488),#8499,.T.); +#8488 = FACE_BOUND('',#8489,.T.); +#8489 = EDGE_LOOP('',(#8490,#8491,#8492,#8493)); +#8490 = ORIENTED_EDGE('',*,*,#8445,.T.); +#8491 = ORIENTED_EDGE('',*,*,#7747,.T.); +#8492 = ORIENTED_EDGE('',*,*,#8467,.F.); +#8493 = ORIENTED_EDGE('',*,*,#8494,.F.); +#8494 = EDGE_CURVE('',#8446,#8468,#8495,.T.); +#8495 = LINE('',#8496,#8497); +#8496 = CARTESIAN_POINT('',(0.277128129211,-0.32,1.5E-02)); +#8497 = VECTOR('',#8498,1.); +#8498 = DIRECTION('',(-0.866025403784,0.5,0.)); +#8499 = PLANE('',#8500); +#8500 = AXIS2_PLACEMENT_3D('',#8501,#8502,#8503); +#8501 = CARTESIAN_POINT('',(0.277128129211,-0.32,1.5E-02)); +#8502 = DIRECTION('',(-0.5,-0.866025403784,0.)); +#8503 = DIRECTION('',(-0.866025403784,0.5,0.)); +#8504 = ADVANCED_FACE('',(#8505),#8527,.F.); +#8505 = FACE_BOUND('',#8506,.F.); +#8506 = EDGE_LOOP('',(#8507,#8515,#8516,#8517,#8518,#8519,#8520,#8521)); +#8507 = ORIENTED_EDGE('',*,*,#8508,.F.); +#8508 = EDGE_CURVE('',#8324,#8509,#8511,.T.); +#8509 = VERTEX_POINT('',#8510); +#8510 = CARTESIAN_POINT('',(0.77,0.4,-3.469446951954E-18)); +#8511 = LINE('',#8512,#8513); +#8512 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#8513 = VECTOR('',#8514,1.); +#8514 = DIRECTION('',(1.,0.,0.)); +#8515 = ORIENTED_EDGE('',*,*,#8323,.F.); +#8516 = ORIENTED_EDGE('',*,*,#8356,.F.); +#8517 = ORIENTED_EDGE('',*,*,#8371,.F.); +#8518 = ORIENTED_EDGE('',*,*,#8404,.F.); +#8519 = ORIENTED_EDGE('',*,*,#8422,.F.); +#8520 = ORIENTED_EDGE('',*,*,#7769,.T.); +#8521 = ORIENTED_EDGE('',*,*,#8522,.T.); +#8522 = EDGE_CURVE('',#7772,#8509,#8523,.T.); +#8523 = LINE('',#8524,#8525); +#8524 = CARTESIAN_POINT('',(0.77,-0.4,-3.469446951954E-18)); +#8525 = VECTOR('',#8526,1.); +#8526 = DIRECTION('',(0.,1.,0.)); +#8527 = PLANE('',#8528); +#8528 = AXIS2_PLACEMENT_3D('',#8529,#8530,#8531); +#8529 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#8530 = DIRECTION('',(0.,0.,1.)); +#8531 = DIRECTION('',(1.,0.,-0.)); +#8532 = ADVANCED_FACE('',(#8533),#8552,.T.); +#8533 = FACE_BOUND('',#8534,.T.); +#8534 = EDGE_LOOP('',(#8535,#8536,#8537,#8546)); +#8535 = ORIENTED_EDGE('',*,*,#7821,.T.); +#8536 = ORIENTED_EDGE('',*,*,#8522,.T.); +#8537 = ORIENTED_EDGE('',*,*,#8538,.F.); +#8538 = EDGE_CURVE('',#8539,#8509,#8541,.T.); +#8539 = VERTEX_POINT('',#8540); +#8540 = CARTESIAN_POINT('',(0.8,0.4,3.E-02)); +#8541 = CIRCLE('',#8542,3.E-02); +#8542 = AXIS2_PLACEMENT_3D('',#8543,#8544,#8545); +#8543 = CARTESIAN_POINT('',(0.77,0.4,3.E-02)); +#8544 = DIRECTION('',(0.,1.,0.)); +#8545 = DIRECTION('',(0.,-0.,1.)); +#8546 = ORIENTED_EDGE('',*,*,#8547,.F.); +#8547 = EDGE_CURVE('',#7814,#8539,#8548,.T.); +#8548 = LINE('',#8549,#8550); +#8549 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#8550 = VECTOR('',#8551,1.); +#8551 = DIRECTION('',(0.,1.,0.)); +#8552 = CYLINDRICAL_SURFACE('',#8553,3.E-02); +#8553 = AXIS2_PLACEMENT_3D('',#8554,#8555,#8556); +#8554 = CARTESIAN_POINT('',(0.77,-0.4,3.E-02)); +#8555 = DIRECTION('',(0.,1.,0.)); +#8556 = DIRECTION('',(1.,0.,0.)); +#8557 = ADVANCED_FACE('',(#8558),#8576,.T.); +#8558 = FACE_BOUND('',#8559,.T.); +#8559 = EDGE_LOOP('',(#8560,#8561,#8562,#8570)); +#8560 = ORIENTED_EDGE('',*,*,#7813,.F.); +#8561 = ORIENTED_EDGE('',*,*,#8547,.T.); +#8562 = ORIENTED_EDGE('',*,*,#8563,.T.); +#8563 = EDGE_CURVE('',#8539,#8564,#8566,.T.); +#8564 = VERTEX_POINT('',#8565); +#8565 = CARTESIAN_POINT('',(0.8,0.4,0.47)); +#8566 = LINE('',#8567,#8568); +#8567 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#8568 = VECTOR('',#8569,1.); +#8569 = DIRECTION('',(0.,0.,1.)); +#8570 = ORIENTED_EDGE('',*,*,#8571,.F.); +#8571 = EDGE_CURVE('',#7805,#8564,#8572,.T.); +#8572 = LINE('',#8573,#8574); +#8573 = CARTESIAN_POINT('',(0.8,-0.4,0.47)); +#8574 = VECTOR('',#8575,1.); +#8575 = DIRECTION('',(0.,1.,0.)); +#8576 = PLANE('',#8577); +#8577 = AXIS2_PLACEMENT_3D('',#8578,#8579,#8580); +#8578 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#8579 = DIRECTION('',(1.,0.,0.)); +#8580 = DIRECTION('',(0.,0.,1.)); +#8581 = ADVANCED_FACE('',(#8582),#8601,.T.); +#8582 = FACE_BOUND('',#8583,.T.); +#8583 = EDGE_LOOP('',(#8584,#8585,#8594,#8600)); +#8584 = ORIENTED_EDGE('',*,*,#8571,.T.); +#8585 = ORIENTED_EDGE('',*,*,#8586,.T.); +#8586 = EDGE_CURVE('',#8564,#8587,#8589,.T.); +#8587 = VERTEX_POINT('',#8588); +#8588 = CARTESIAN_POINT('',(0.77,0.4,0.5)); +#8589 = CIRCLE('',#8590,3.E-02); +#8590 = AXIS2_PLACEMENT_3D('',#8591,#8592,#8593); +#8591 = CARTESIAN_POINT('',(0.77,0.4,0.47)); +#8592 = DIRECTION('',(0.,-1.,0.)); +#8593 = DIRECTION('',(0.,0.,1.)); +#8594 = ORIENTED_EDGE('',*,*,#8595,.F.); +#8595 = EDGE_CURVE('',#7797,#8587,#8596,.T.); +#8596 = LINE('',#8597,#8598); +#8597 = CARTESIAN_POINT('',(0.77,-0.4,0.5)); +#8598 = VECTOR('',#8599,1.); +#8599 = DIRECTION('',(0.,1.,0.)); +#8600 = ORIENTED_EDGE('',*,*,#7804,.F.); +#8601 = CYLINDRICAL_SURFACE('',#8602,3.E-02); +#8602 = AXIS2_PLACEMENT_3D('',#8603,#8604,#8605); +#8603 = CARTESIAN_POINT('',(0.77,-0.4,0.47)); +#8604 = DIRECTION('',(0.,1.,0.)); +#8605 = DIRECTION('',(1.,0.,0.)); +#8606 = ADVANCED_FACE('',(#8607),#8648,.T.); +#8607 = FACE_BOUND('',#8608,.T.); +#8608 = EDGE_LOOP('',(#8609,#8617,#8625,#8631,#8632,#8640,#8646,#8647)); +#8609 = ORIENTED_EDGE('',*,*,#8610,.F.); +#8610 = EDGE_CURVE('',#8611,#8587,#8613,.T.); +#8611 = VERTEX_POINT('',#8612); +#8612 = CARTESIAN_POINT('',(0.725,0.4,0.5)); +#8613 = LINE('',#8614,#8615); +#8614 = CARTESIAN_POINT('',(0.5,0.4,0.5)); +#8615 = VECTOR('',#8616,1.); +#8616 = DIRECTION('',(1.,0.,0.)); +#8617 = ORIENTED_EDGE('',*,*,#8618,.F.); +#8618 = EDGE_CURVE('',#8619,#8611,#8621,.T.); +#8619 = VERTEX_POINT('',#8620); +#8620 = CARTESIAN_POINT('',(0.725,0.3,0.5)); +#8621 = LINE('',#8622,#8623); +#8622 = CARTESIAN_POINT('',(0.725,-5.E-02,0.5)); +#8623 = VECTOR('',#8624,1.); +#8624 = DIRECTION('',(0.,1.,0.)); +#8625 = ORIENTED_EDGE('',*,*,#8626,.F.); +#8626 = EDGE_CURVE('',#7902,#8619,#8627,.T.); +#8627 = LINE('',#8628,#8629); +#8628 = CARTESIAN_POINT('',(-0.1125,0.3,0.5)); +#8629 = VECTOR('',#8630,1.); +#8630 = DIRECTION('',(1.,0.,0.)); +#8631 = ORIENTED_EDGE('',*,*,#7901,.F.); +#8632 = ORIENTED_EDGE('',*,*,#8633,.F.); +#8633 = EDGE_CURVE('',#8634,#7893,#8636,.T.); +#8634 = VERTEX_POINT('',#8635); +#8635 = CARTESIAN_POINT('',(0.725,-0.3,0.5)); +#8636 = LINE('',#8637,#8638); +#8637 = CARTESIAN_POINT('',(0.6125,-0.3,0.5)); +#8638 = VECTOR('',#8639,1.); +#8639 = DIRECTION('',(-1.,0.,0.)); +#8640 = ORIENTED_EDGE('',*,*,#8641,.F.); +#8641 = EDGE_CURVE('',#7789,#8634,#8642,.T.); +#8642 = LINE('',#8643,#8644); +#8643 = CARTESIAN_POINT('',(0.725,-0.45,0.5)); +#8644 = VECTOR('',#8645,1.); +#8645 = DIRECTION('',(0.,1.,0.)); +#8646 = ORIENTED_EDGE('',*,*,#7796,.T.); +#8647 = ORIENTED_EDGE('',*,*,#8595,.T.); +#8648 = PLANE('',#8649); +#8649 = AXIS2_PLACEMENT_3D('',#8650,#8651,#8652); +#8650 = CARTESIAN_POINT('',(0.5,-0.4,0.5)); +#8651 = DIRECTION('',(0.,0.,1.)); +#8652 = DIRECTION('',(1.,0.,-0.)); +#8653 = ADVANCED_FACE('',(#8654),#8665,.F.); +#8654 = FACE_BOUND('',#8655,.F.); +#8655 = EDGE_LOOP('',(#8656,#8662,#8663,#8664)); +#8656 = ORIENTED_EDGE('',*,*,#8657,.F.); +#8657 = EDGE_CURVE('',#8634,#7837,#8658,.T.); +#8658 = LINE('',#8659,#8660); +#8659 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8660 = VECTOR('',#8661,1.); +#8661 = DIRECTION('',(-0.,-0.,-1.)); +#8662 = ORIENTED_EDGE('',*,*,#8641,.F.); +#8663 = ORIENTED_EDGE('',*,*,#7788,.T.); +#8664 = ORIENTED_EDGE('',*,*,#7846,.F.); +#8665 = PLANE('',#8666); +#8666 = AXIS2_PLACEMENT_3D('',#8667,#8668,#8669); +#8667 = CARTESIAN_POINT('',(0.725,-0.5,0.75)); +#8668 = DIRECTION('',(1.,0.,0.)); +#8669 = DIRECTION('',(-0.,1.,0.)); +#8670 = ADVANCED_FACE('',(#8671),#8677,.F.); +#8671 = FACE_BOUND('',#8672,.F.); +#8672 = EDGE_LOOP('',(#8673,#8674,#8675,#8676)); +#8673 = ORIENTED_EDGE('',*,*,#8633,.F.); +#8674 = ORIENTED_EDGE('',*,*,#8657,.T.); +#8675 = ORIENTED_EDGE('',*,*,#7836,.F.); +#8676 = ORIENTED_EDGE('',*,*,#7892,.T.); +#8677 = PLANE('',#8678); +#8678 = AXIS2_PLACEMENT_3D('',#8679,#8680,#8681); +#8679 = CARTESIAN_POINT('',(0.725,-0.3,0.75)); +#8680 = DIRECTION('',(0.,1.,0.)); +#8681 = DIRECTION('',(-1.,0.,0.)); +#8682 = ADVANCED_FACE('',(#8683),#8699,.F.); +#8683 = FACE_BOUND('',#8684,.F.); +#8684 = EDGE_LOOP('',(#8685,#8686,#8692,#8693)); +#8685 = ORIENTED_EDGE('',*,*,#8618,.F.); +#8686 = ORIENTED_EDGE('',*,*,#8687,.T.); +#8687 = EDGE_CURVE('',#8619,#7870,#8688,.T.); +#8688 = LINE('',#8689,#8690); +#8689 = CARTESIAN_POINT('',(0.725,0.3,0.75)); +#8690 = VECTOR('',#8691,1.); +#8691 = DIRECTION('',(-0.,-0.,-1.)); +#8692 = ORIENTED_EDGE('',*,*,#7877,.F.); +#8693 = ORIENTED_EDGE('',*,*,#8694,.F.); +#8694 = EDGE_CURVE('',#8611,#7861,#8695,.T.); +#8695 = LINE('',#8696,#8697); +#8696 = CARTESIAN_POINT('',(0.725,0.4,0.375)); +#8697 = VECTOR('',#8698,1.); +#8698 = DIRECTION('',(0.,0.,-1.)); +#8699 = PLANE('',#8700); +#8700 = AXIS2_PLACEMENT_3D('',#8701,#8702,#8703); +#8701 = CARTESIAN_POINT('',(0.725,0.3,0.75)); +#8702 = DIRECTION('',(1.,0.,0.)); +#8703 = DIRECTION('',(-0.,1.,0.)); +#8704 = ADVANCED_FACE('',(#8705),#8711,.F.); +#8705 = FACE_BOUND('',#8706,.F.); +#8706 = EDGE_LOOP('',(#8707,#8708,#8709,#8710)); +#8707 = ORIENTED_EDGE('',*,*,#8687,.F.); +#8708 = ORIENTED_EDGE('',*,*,#8626,.F.); +#8709 = ORIENTED_EDGE('',*,*,#7909,.F.); +#8710 = ORIENTED_EDGE('',*,*,#7869,.F.); +#8711 = PLANE('',#8712); +#8712 = AXIS2_PLACEMENT_3D('',#8713,#8714,#8715); +#8713 = CARTESIAN_POINT('',(-0.725,0.3,0.75)); +#8714 = DIRECTION('',(0.,-1.,0.)); +#8715 = DIRECTION('',(1.,0.,0.)); +#8716 = ADVANCED_FACE('',(#8717),#8729,.T.); +#8717 = FACE_BOUND('',#8718,.T.); +#8718 = EDGE_LOOP('',(#8719,#8720,#8721,#8722,#8723,#8724,#8725,#8726, + #8727,#8728)); +#8719 = ORIENTED_EDGE('',*,*,#8097,.F.); +#8720 = ORIENTED_EDGE('',*,*,#8168,.F.); +#8721 = ORIENTED_EDGE('',*,*,#8204,.T.); +#8722 = ORIENTED_EDGE('',*,*,#8228,.T.); +#8723 = ORIENTED_EDGE('',*,*,#8052,.T.); +#8724 = ORIENTED_EDGE('',*,*,#8013,.F.); +#8725 = ORIENTED_EDGE('',*,*,#7940,.F.); +#8726 = ORIENTED_EDGE('',*,*,#7932,.F.); +#8727 = ORIENTED_EDGE('',*,*,#7924,.T.); +#8728 = ORIENTED_EDGE('',*,*,#8299,.F.); +#8729 = PLANE('',#8730); +#8730 = AXIS2_PLACEMENT_3D('',#8731,#8732,#8733); +#8731 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#8732 = DIRECTION('',(0.,1.,0.)); +#8733 = DIRECTION('',(0.,-0.,1.)); +#8734 = ADVANCED_FACE('',(#8735),#8747,.T.); +#8735 = FACE_BOUND('',#8736,.T.); +#8736 = EDGE_LOOP('',(#8737,#8738,#8739,#8740,#8741,#8742,#8743,#8744, + #8745,#8746)); +#8737 = ORIENTED_EDGE('',*,*,#8508,.F.); +#8738 = ORIENTED_EDGE('',*,*,#8331,.F.); +#8739 = ORIENTED_EDGE('',*,*,#7965,.T.); +#8740 = ORIENTED_EDGE('',*,*,#7957,.T.); +#8741 = ORIENTED_EDGE('',*,*,#7949,.F.); +#8742 = ORIENTED_EDGE('',*,*,#8694,.F.); +#8743 = ORIENTED_EDGE('',*,*,#8610,.T.); +#8744 = ORIENTED_EDGE('',*,*,#8586,.F.); +#8745 = ORIENTED_EDGE('',*,*,#8563,.F.); +#8746 = ORIENTED_EDGE('',*,*,#8538,.T.); +#8747 = PLANE('',#8748); +#8748 = AXIS2_PLACEMENT_3D('',#8749,#8750,#8751); +#8749 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#8750 = DIRECTION('',(0.,1.,0.)); +#8751 = DIRECTION('',(0.,-0.,1.)); +#8752 = ADVANCED_FACE('',(#8753),#8758,.T.); +#8753 = FACE_BOUND('',#8754,.T.); +#8754 = EDGE_LOOP('',(#8755,#8756,#8757)); +#8755 = ORIENTED_EDGE('',*,*,#8477,.T.); +#8756 = ORIENTED_EDGE('',*,*,#8453,.T.); +#8757 = ORIENTED_EDGE('',*,*,#8494,.T.); +#8758 = PLANE('',#8759); +#8759 = AXIS2_PLACEMENT_3D('',#8760,#8761,#8762); +#8760 = CARTESIAN_POINT('',(9.237604307034E-02,0.,1.5E-02)); +#8761 = DIRECTION('',(-0.,-0.,-1.)); +#8762 = DIRECTION('',(-1.,0.,0.)); +#8763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#8767)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#8764,#8765,#8766)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#8764 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#8765 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#8766 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#8767 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#8764, + 'distance_accuracy_value','confusion accuracy'); +#8768 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#8769,#8771); +#8769 = ( REPRESENTATION_RELATIONSHIP('','',#7239,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#8770) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#8770 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87); +#8771 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #8772); +#8772 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('19','D4','',#5,#7234,$); +#8773 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7236)); +#8774 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#8775,#8777); +#8775 = ( REPRESENTATION_RELATIONSHIP('','',#7239,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#8776) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#8776 = ITEM_DEFINED_TRANSFORMATION('','',#11,#91); +#8777 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #8778); +#8778 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('20','D5','',#5,#7234,$); +#8779 = SHAPE_DEFINITION_REPRESENTATION(#8780,#8786); +#8780 = PRODUCT_DEFINITION_SHAPE('','',#8781); +#8781 = PRODUCT_DEFINITION('design','',#8782,#8785); +#8782 = PRODUCT_DEFINITION_FORMATION('','',#8783); +#8783 = PRODUCT('D_SOD-323','D_SOD-323','',(#8784)); +#8784 = PRODUCT_CONTEXT('',#2,'mechanical'); +#8785 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#8786 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#8787),#10475); +#8787 = MANIFOLD_SOLID_BREP('',#8788); +#8788 = CLOSED_SHELL('',(#8789,#8843,#8906,#8929,#8959,#8992,#9022,#9045 + ,#9068,#9091,#9114,#9137,#9170,#9193,#9216,#9304,#9379,#9403,#9471, + #9559,#9575,#9591,#9607,#9623,#9640,#9673,#9690,#9712,#9743,#9766, + #9789,#9812,#9842,#9859,#9876,#9893,#9910,#9927,#9944,#9961,#9973, + #9996,#10019,#10036,#10111,#10135,#10203,#10220,#10270,#10287,#10304 + ,#10321,#10338,#10355,#10367,#10398,#10422,#10446,#10463)); +#8789 = ADVANCED_FACE('',(#8790),#8838,.F.); +#8790 = FACE_BOUND('',#8791,.F.); +#8791 = EDGE_LOOP('',(#8792,#8802,#8809,#8817,#8825,#8833)); +#8792 = ORIENTED_EDGE('',*,*,#8793,.T.); +#8793 = EDGE_CURVE('',#8794,#8796,#8798,.T.); +#8794 = VERTEX_POINT('',#8795); +#8795 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#8796 = VERTEX_POINT('',#8797); +#8797 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#8798 = LINE('',#8799,#8800); +#8799 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#8800 = VECTOR('',#8801,1.); +#8801 = DIRECTION('',(0.,1.,0.)); +#8802 = ORIENTED_EDGE('',*,*,#8803,.T.); +#8803 = EDGE_CURVE('',#8796,#8804,#8806,.T.); +#8804 = VERTEX_POINT('',#8805); +#8805 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#8806 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8807,#8808),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#8807 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#8808 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#8809 = ORIENTED_EDGE('',*,*,#8810,.F.); +#8810 = EDGE_CURVE('',#8811,#8804,#8813,.T.); +#8811 = VERTEX_POINT('',#8812); +#8812 = CARTESIAN_POINT('',(-0.85,0.175,0.525)); +#8813 = LINE('',#8814,#8815); +#8814 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#8815 = VECTOR('',#8816,1.); +#8816 = DIRECTION('',(0.,1.,0.)); +#8817 = ORIENTED_EDGE('',*,*,#8818,.F.); +#8818 = EDGE_CURVE('',#8819,#8811,#8821,.T.); +#8819 = VERTEX_POINT('',#8820); +#8820 = CARTESIAN_POINT('',(-0.85,-0.175,0.525)); +#8821 = LINE('',#8822,#8823); +#8822 = CARTESIAN_POINT('',(-0.85,-0.175,0.525)); +#8823 = VECTOR('',#8824,1.); +#8824 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8825 = ORIENTED_EDGE('',*,*,#8826,.F.); +#8826 = EDGE_CURVE('',#8827,#8819,#8829,.T.); +#8827 = VERTEX_POINT('',#8828); +#8828 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#8829 = LINE('',#8830,#8831); +#8830 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#8831 = VECTOR('',#8832,1.); +#8832 = DIRECTION('',(0.,1.,0.)); +#8833 = ORIENTED_EDGE('',*,*,#8834,.F.); +#8834 = EDGE_CURVE('',#8794,#8827,#8835,.T.); +#8835 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8836,#8837),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#8836 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#8837 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#8838 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#8839,#8840) + ,(#8841,#8842 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#8839 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#8840 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#8841 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#8842 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#8843 = ADVANCED_FACE('',(#8844),#8901,.F.); +#8844 = FACE_BOUND('',#8845,.T.); +#8845 = EDGE_LOOP('',(#8846,#8847,#8855,#8863,#8871,#8879,#8887,#8895)); +#8846 = ORIENTED_EDGE('',*,*,#8793,.T.); +#8847 = ORIENTED_EDGE('',*,*,#8848,.T.); +#8848 = EDGE_CURVE('',#8796,#8849,#8851,.T.); +#8849 = VERTEX_POINT('',#8850); +#8850 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#8851 = LINE('',#8852,#8853); +#8852 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#8853 = VECTOR('',#8854,1.); +#8854 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#8855 = ORIENTED_EDGE('',*,*,#8856,.T.); +#8856 = EDGE_CURVE('',#8849,#8857,#8859,.T.); +#8857 = VERTEX_POINT('',#8858); +#8858 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#8859 = LINE('',#8860,#8861); +#8860 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#8861 = VECTOR('',#8862,1.); +#8862 = DIRECTION('',(1.,0.,0.)); +#8863 = ORIENTED_EDGE('',*,*,#8864,.T.); +#8864 = EDGE_CURVE('',#8857,#8865,#8867,.T.); +#8865 = VERTEX_POINT('',#8866); +#8866 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#8867 = LINE('',#8868,#8869); +#8868 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#8869 = VECTOR('',#8870,1.); +#8870 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#8871 = ORIENTED_EDGE('',*,*,#8872,.T.); +#8872 = EDGE_CURVE('',#8865,#8873,#8875,.T.); +#8873 = VERTEX_POINT('',#8874); +#8874 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#8875 = LINE('',#8876,#8877); +#8876 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#8877 = VECTOR('',#8878,1.); +#8878 = DIRECTION('',(0.,-1.,0.)); +#8879 = ORIENTED_EDGE('',*,*,#8880,.T.); +#8880 = EDGE_CURVE('',#8873,#8881,#8883,.T.); +#8881 = VERTEX_POINT('',#8882); +#8882 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#8883 = LINE('',#8884,#8885); +#8884 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#8885 = VECTOR('',#8886,1.); +#8886 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#8887 = ORIENTED_EDGE('',*,*,#8888,.T.); +#8888 = EDGE_CURVE('',#8881,#8889,#8891,.T.); +#8889 = VERTEX_POINT('',#8890); +#8890 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#8891 = LINE('',#8892,#8893); +#8892 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#8893 = VECTOR('',#8894,1.); +#8894 = DIRECTION('',(-1.,0.,0.)); +#8895 = ORIENTED_EDGE('',*,*,#8896,.T.); +#8896 = EDGE_CURVE('',#8889,#8794,#8897,.T.); +#8897 = LINE('',#8898,#8899); +#8898 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#8899 = VECTOR('',#8900,1.); +#8900 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#8901 = PLANE('',#8902); +#8902 = AXIS2_PLACEMENT_3D('',#8903,#8904,#8905); +#8903 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#8904 = DIRECTION('',(0.,0.,1.)); +#8905 = DIRECTION('',(0.844997546083,0.534770181587,-0.)); +#8906 = ADVANCED_FACE('',(#8907),#8924,.F.); +#8907 = FACE_BOUND('',#8908,.F.); +#8908 = EDGE_LOOP('',(#8909,#8910,#8917,#8923)); +#8909 = ORIENTED_EDGE('',*,*,#8848,.T.); +#8910 = ORIENTED_EDGE('',*,*,#8911,.T.); +#8911 = EDGE_CURVE('',#8849,#8912,#8914,.T.); +#8912 = VERTEX_POINT('',#8913); +#8913 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#8914 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8915,#8916),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#8915 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#8916 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#8917 = ORIENTED_EDGE('',*,*,#8918,.F.); +#8918 = EDGE_CURVE('',#8804,#8912,#8919,.T.); +#8919 = LINE('',#8920,#8921); +#8920 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#8921 = VECTOR('',#8922,1.); +#8922 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#8923 = ORIENTED_EDGE('',*,*,#8803,.F.); +#8924 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#8925,#8926) + ,(#8927,#8928 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#8925 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#8926 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#8927 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#8928 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#8929 = ADVANCED_FACE('',(#8930),#8954,.F.); +#8930 = FACE_BOUND('',#8931,.F.); +#8931 = EDGE_LOOP('',(#8932,#8939,#8940,#8948)); +#8932 = ORIENTED_EDGE('',*,*,#8933,.F.); +#8933 = EDGE_CURVE('',#8827,#8934,#8936,.T.); +#8934 = VERTEX_POINT('',#8935); +#8935 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#8936 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8937,#8938),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#8937 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#8938 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#8939 = ORIENTED_EDGE('',*,*,#8826,.T.); +#8940 = ORIENTED_EDGE('',*,*,#8941,.T.); +#8941 = EDGE_CURVE('',#8819,#8942,#8944,.T.); +#8942 = VERTEX_POINT('',#8943); +#8943 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#8944 = LINE('',#8945,#8946); +#8945 = CARTESIAN_POINT('',(-0.85,-0.175,0.503709028349)); +#8946 = VECTOR('',#8947,1.); +#8947 = DIRECTION('',(0.,0.,1.)); +#8948 = ORIENTED_EDGE('',*,*,#8949,.F.); +#8949 = EDGE_CURVE('',#8934,#8942,#8950,.T.); +#8950 = LINE('',#8951,#8952); +#8951 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#8952 = VECTOR('',#8953,1.); +#8953 = DIRECTION('',(0.,1.,0.)); +#8954 = PLANE('',#8955); +#8955 = AXIS2_PLACEMENT_3D('',#8956,#8957,#8958); +#8956 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#8957 = DIRECTION('',(1.,0.,0.)); +#8958 = DIRECTION('',(-0.,1.,0.)); +#8959 = ADVANCED_FACE('',(#8960),#8987,.F.); +#8960 = FACE_BOUND('',#8961,.F.); +#8961 = EDGE_LOOP('',(#8962,#8963,#8972,#8980)); +#8962 = ORIENTED_EDGE('',*,*,#8818,.T.); +#8963 = ORIENTED_EDGE('',*,*,#8964,.T.); +#8964 = EDGE_CURVE('',#8811,#8965,#8967,.T.); +#8965 = VERTEX_POINT('',#8966); +#8966 = CARTESIAN_POINT('',(-0.918936542711,0.175,0.467155372437)); +#8967 = CIRCLE('',#8968,7.E-02); +#8968 = AXIS2_PLACEMENT_3D('',#8969,#8970,#8971); +#8969 = CARTESIAN_POINT('',(-0.85,0.175,0.455)); +#8970 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8971 = DIRECTION('',(0.,0.,1.)); +#8972 = ORIENTED_EDGE('',*,*,#8973,.F.); +#8973 = EDGE_CURVE('',#8974,#8965,#8976,.T.); +#8974 = VERTEX_POINT('',#8975); +#8975 = CARTESIAN_POINT('',(-0.918936542711,-0.175,0.467155372437)); +#8976 = LINE('',#8977,#8978); +#8977 = CARTESIAN_POINT('',(-0.918936542711,-0.175,0.467155372437)); +#8978 = VECTOR('',#8979,1.); +#8979 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8980 = ORIENTED_EDGE('',*,*,#8981,.F.); +#8981 = EDGE_CURVE('',#8819,#8974,#8982,.T.); +#8982 = CIRCLE('',#8983,7.E-02); +#8983 = AXIS2_PLACEMENT_3D('',#8984,#8985,#8986); +#8984 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#8985 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8986 = DIRECTION('',(0.,0.,1.)); +#8987 = CYLINDRICAL_SURFACE('',#8988,7.E-02); +#8988 = AXIS2_PLACEMENT_3D('',#8989,#8990,#8991); +#8989 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#8990 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8991 = DIRECTION('',(0.,0.,1.)); +#8992 = ADVANCED_FACE('',(#8993),#9017,.F.); +#8993 = FACE_BOUND('',#8994,.F.); +#8994 = EDGE_LOOP('',(#8995,#9003,#9004,#9011)); +#8995 = ORIENTED_EDGE('',*,*,#8996,.F.); +#8996 = EDGE_CURVE('',#8811,#8997,#8999,.T.); +#8997 = VERTEX_POINT('',#8998); +#8998 = CARTESIAN_POINT('',(-0.85,0.175,0.675)); +#8999 = LINE('',#9000,#9001); +#9000 = CARTESIAN_POINT('',(-0.85,0.175,0.503709028349)); +#9001 = VECTOR('',#9002,1.); +#9002 = DIRECTION('',(0.,0.,1.)); +#9003 = ORIENTED_EDGE('',*,*,#8810,.T.); +#9004 = ORIENTED_EDGE('',*,*,#9005,.T.); +#9005 = EDGE_CURVE('',#8804,#9006,#9008,.T.); +#9006 = VERTEX_POINT('',#9007); +#9007 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#9008 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9009,#9010),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9009 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#9010 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#9011 = ORIENTED_EDGE('',*,*,#9012,.F.); +#9012 = EDGE_CURVE('',#8997,#9006,#9013,.T.); +#9013 = LINE('',#9014,#9015); +#9014 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#9015 = VECTOR('',#9016,1.); +#9016 = DIRECTION('',(0.,1.,0.)); +#9017 = PLANE('',#9018); +#9018 = AXIS2_PLACEMENT_3D('',#9019,#9020,#9021); +#9019 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#9020 = DIRECTION('',(1.,0.,0.)); +#9021 = DIRECTION('',(-0.,1.,0.)); +#9022 = ADVANCED_FACE('',(#9023),#9040,.F.); +#9023 = FACE_BOUND('',#9024,.F.); +#9024 = EDGE_LOOP('',(#9025,#9026,#9027,#9035)); +#9025 = ORIENTED_EDGE('',*,*,#8896,.T.); +#9026 = ORIENTED_EDGE('',*,*,#8834,.T.); +#9027 = ORIENTED_EDGE('',*,*,#9028,.F.); +#9028 = EDGE_CURVE('',#9029,#8827,#9031,.T.); +#9029 = VERTEX_POINT('',#9030); +#9030 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#9031 = LINE('',#9032,#9033); +#9032 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#9033 = VECTOR('',#9034,1.); +#9034 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#9035 = ORIENTED_EDGE('',*,*,#9036,.F.); +#9036 = EDGE_CURVE('',#8889,#9029,#9037,.T.); +#9037 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9038,#9039),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9038 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#9039 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#9040 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9041,#9042) + ,(#9043,#9044 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#9041 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#9042 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#9043 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#9044 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#9045 = ADVANCED_FACE('',(#9046),#9063,.F.); +#9046 = FACE_BOUND('',#9047,.F.); +#9047 = EDGE_LOOP('',(#9048,#9049,#9050,#9058)); +#9048 = ORIENTED_EDGE('',*,*,#8888,.T.); +#9049 = ORIENTED_EDGE('',*,*,#9036,.T.); +#9050 = ORIENTED_EDGE('',*,*,#9051,.F.); +#9051 = EDGE_CURVE('',#9052,#9029,#9054,.T.); +#9052 = VERTEX_POINT('',#9053); +#9053 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#9054 = LINE('',#9055,#9056); +#9055 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#9056 = VECTOR('',#9057,1.); +#9057 = DIRECTION('',(-1.,0.,0.)); +#9058 = ORIENTED_EDGE('',*,*,#9059,.F.); +#9059 = EDGE_CURVE('',#8881,#9052,#9060,.T.); +#9060 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9061,#9062),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9061 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#9062 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#9063 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9064,#9065) + ,(#9066,#9067 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.51),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#9064 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#9065 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#9066 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#9067 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#9068 = ADVANCED_FACE('',(#9069),#9086,.F.); +#9069 = FACE_BOUND('',#9070,.F.); +#9070 = EDGE_LOOP('',(#9071,#9072,#9079,#9085)); +#9071 = ORIENTED_EDGE('',*,*,#8856,.T.); +#9072 = ORIENTED_EDGE('',*,*,#9073,.T.); +#9073 = EDGE_CURVE('',#8857,#9074,#9076,.T.); +#9074 = VERTEX_POINT('',#9075); +#9075 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#9076 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9077,#9078),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9077 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#9078 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#9079 = ORIENTED_EDGE('',*,*,#9080,.F.); +#9080 = EDGE_CURVE('',#8912,#9074,#9081,.T.); +#9081 = LINE('',#9082,#9083); +#9082 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#9083 = VECTOR('',#9084,1.); +#9084 = DIRECTION('',(1.,0.,0.)); +#9085 = ORIENTED_EDGE('',*,*,#8911,.F.); +#9086 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9087,#9088) + ,(#9089,#9090 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.51),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#9087 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#9088 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#9089 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#9090 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#9091 = ADVANCED_FACE('',(#9092),#9109,.F.); +#9092 = FACE_BOUND('',#9093,.F.); +#9093 = EDGE_LOOP('',(#9094,#9095,#9096,#9104)); +#9094 = ORIENTED_EDGE('',*,*,#8880,.T.); +#9095 = ORIENTED_EDGE('',*,*,#9059,.T.); +#9096 = ORIENTED_EDGE('',*,*,#9097,.F.); +#9097 = EDGE_CURVE('',#9098,#9052,#9100,.T.); +#9098 = VERTEX_POINT('',#9099); +#9099 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#9100 = LINE('',#9101,#9102); +#9101 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#9102 = VECTOR('',#9103,1.); +#9103 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#9104 = ORIENTED_EDGE('',*,*,#9105,.F.); +#9105 = EDGE_CURVE('',#8873,#9098,#9106,.T.); +#9106 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9107,#9108),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9107 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#9108 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#9109 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9110,#9111) + ,(#9112,#9113 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#9110 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#9111 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#9112 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#9113 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#9114 = ADVANCED_FACE('',(#9115),#9132,.F.); +#9115 = FACE_BOUND('',#9116,.F.); +#9116 = EDGE_LOOP('',(#9117,#9118,#9125,#9131)); +#9117 = ORIENTED_EDGE('',*,*,#8864,.T.); +#9118 = ORIENTED_EDGE('',*,*,#9119,.T.); +#9119 = EDGE_CURVE('',#8865,#9120,#9122,.T.); +#9120 = VERTEX_POINT('',#9121); +#9121 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#9122 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9123,#9124),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9123 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#9124 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#9125 = ORIENTED_EDGE('',*,*,#9126,.F.); +#9126 = EDGE_CURVE('',#9074,#9120,#9127,.T.); +#9127 = LINE('',#9128,#9129); +#9128 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#9129 = VECTOR('',#9130,1.); +#9130 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#9131 = ORIENTED_EDGE('',*,*,#9073,.F.); +#9132 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9133,#9134) + ,(#9135,#9136 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#9133 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#9134 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#9135 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#9136 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#9137 = ADVANCED_FACE('',(#9138),#9165,.F.); +#9138 = FACE_BOUND('',#9139,.F.); +#9139 = EDGE_LOOP('',(#9140,#9141,#9142,#9150,#9158,#9164)); +#9140 = ORIENTED_EDGE('',*,*,#8872,.T.); +#9141 = ORIENTED_EDGE('',*,*,#9105,.T.); +#9142 = ORIENTED_EDGE('',*,*,#9143,.F.); +#9143 = EDGE_CURVE('',#9144,#9098,#9146,.T.); +#9144 = VERTEX_POINT('',#9145); +#9145 = CARTESIAN_POINT('',(0.85,-0.175,0.525)); +#9146 = LINE('',#9147,#9148); +#9147 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#9148 = VECTOR('',#9149,1.); +#9149 = DIRECTION('',(0.,-1.,0.)); +#9150 = ORIENTED_EDGE('',*,*,#9151,.F.); +#9151 = EDGE_CURVE('',#9152,#9144,#9154,.T.); +#9152 = VERTEX_POINT('',#9153); +#9153 = CARTESIAN_POINT('',(0.85,0.175,0.525)); +#9154 = LINE('',#9155,#9156); +#9155 = CARTESIAN_POINT('',(0.85,0.175,0.525)); +#9156 = VECTOR('',#9157,1.); +#9157 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#9158 = ORIENTED_EDGE('',*,*,#9159,.F.); +#9159 = EDGE_CURVE('',#9120,#9152,#9160,.T.); +#9160 = LINE('',#9161,#9162); +#9161 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#9162 = VECTOR('',#9163,1.); +#9163 = DIRECTION('',(0.,-1.,0.)); +#9164 = ORIENTED_EDGE('',*,*,#9119,.F.); +#9165 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9166,#9167) + ,(#9168,#9169 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#9166 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#9167 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#9168 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#9169 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#9170 = ADVANCED_FACE('',(#9171),#9188,.F.); +#9171 = FACE_BOUND('',#9172,.F.); +#9172 = EDGE_LOOP('',(#9173,#9174,#9181,#9187)); +#9173 = ORIENTED_EDGE('',*,*,#8918,.T.); +#9174 = ORIENTED_EDGE('',*,*,#9175,.T.); +#9175 = EDGE_CURVE('',#8912,#9176,#9178,.T.); +#9176 = VERTEX_POINT('',#9177); +#9177 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#9178 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9179,#9180),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9179 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#9180 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#9181 = ORIENTED_EDGE('',*,*,#9182,.F.); +#9182 = EDGE_CURVE('',#9006,#9176,#9183,.T.); +#9183 = LINE('',#9184,#9185); +#9184 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#9185 = VECTOR('',#9186,1.); +#9186 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#9187 = ORIENTED_EDGE('',*,*,#9005,.F.); +#9188 = PLANE('',#9189); +#9189 = AXIS2_PLACEMENT_3D('',#9190,#9191,#9192); +#9190 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#9191 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#9192 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#9193 = ADVANCED_FACE('',(#9194),#9211,.F.); +#9194 = FACE_BOUND('',#9195,.F.); +#9195 = EDGE_LOOP('',(#9196,#9197,#9198,#9206)); +#9196 = ORIENTED_EDGE('',*,*,#9028,.T.); +#9197 = ORIENTED_EDGE('',*,*,#8933,.T.); +#9198 = ORIENTED_EDGE('',*,*,#9199,.F.); +#9199 = EDGE_CURVE('',#9200,#8934,#9202,.T.); +#9200 = VERTEX_POINT('',#9201); +#9201 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#9202 = LINE('',#9203,#9204); +#9203 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#9204 = VECTOR('',#9205,1.); +#9205 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#9206 = ORIENTED_EDGE('',*,*,#9207,.F.); +#9207 = EDGE_CURVE('',#9029,#9200,#9208,.T.); +#9208 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9209,#9210),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9209 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#9210 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#9211 = PLANE('',#9212); +#9212 = AXIS2_PLACEMENT_3D('',#9213,#9214,#9215); +#9213 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#9214 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#9215 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#9216 = ADVANCED_FACE('',(#9217),#9299,.F.); +#9217 = FACE_BOUND('',#9218,.F.); +#9218 = EDGE_LOOP('',(#9219,#9220,#9221,#9229,#9237,#9245,#9253,#9261, + #9269,#9277,#9285,#9293)); +#9219 = ORIENTED_EDGE('',*,*,#9199,.T.); +#9220 = ORIENTED_EDGE('',*,*,#8949,.T.); +#9221 = ORIENTED_EDGE('',*,*,#9222,.T.); +#9222 = EDGE_CURVE('',#8942,#9223,#9225,.T.); +#9223 = VERTEX_POINT('',#9224); +#9224 = CARTESIAN_POINT('',(-0.825,-0.175,0.675)); +#9225 = LINE('',#9226,#9227); +#9226 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#9227 = VECTOR('',#9228,1.); +#9228 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#9229 = ORIENTED_EDGE('',*,*,#9230,.F.); +#9230 = EDGE_CURVE('',#9231,#9223,#9233,.T.); +#9231 = VERTEX_POINT('',#9232); +#9232 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#9233 = LINE('',#9234,#9235); +#9234 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#9235 = VECTOR('',#9236,1.); +#9236 = DIRECTION('',(0.,1.,0.)); +#9237 = ORIENTED_EDGE('',*,*,#9238,.F.); +#9238 = EDGE_CURVE('',#9239,#9231,#9241,.T.); +#9239 = VERTEX_POINT('',#9240); +#9240 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#9241 = LINE('',#9242,#9243); +#9242 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#9243 = VECTOR('',#9244,1.); +#9244 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#9245 = ORIENTED_EDGE('',*,*,#9246,.F.); +#9246 = EDGE_CURVE('',#9247,#9239,#9249,.T.); +#9247 = VERTEX_POINT('',#9248); +#9248 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#9249 = LINE('',#9250,#9251); +#9250 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#9251 = VECTOR('',#9252,1.); +#9252 = DIRECTION('',(-1.,0.,0.)); +#9253 = ORIENTED_EDGE('',*,*,#9254,.F.); +#9254 = EDGE_CURVE('',#9255,#9247,#9257,.T.); +#9255 = VERTEX_POINT('',#9256); +#9256 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#9257 = LINE('',#9258,#9259); +#9258 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#9259 = VECTOR('',#9260,1.); +#9260 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#9261 = ORIENTED_EDGE('',*,*,#9262,.F.); +#9262 = EDGE_CURVE('',#9263,#9255,#9265,.T.); +#9263 = VERTEX_POINT('',#9264); +#9264 = CARTESIAN_POINT('',(0.825,-0.175,0.675)); +#9265 = LINE('',#9266,#9267); +#9266 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#9267 = VECTOR('',#9268,1.); +#9268 = DIRECTION('',(0.,-1.,0.)); +#9269 = ORIENTED_EDGE('',*,*,#9270,.F.); +#9270 = EDGE_CURVE('',#9271,#9263,#9273,.T.); +#9271 = VERTEX_POINT('',#9272); +#9272 = CARTESIAN_POINT('',(0.85,-0.175,0.675)); +#9273 = LINE('',#9274,#9275); +#9274 = CARTESIAN_POINT('',(0.85,-0.175,0.675)); +#9275 = VECTOR('',#9276,1.); +#9276 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#9277 = ORIENTED_EDGE('',*,*,#9278,.T.); +#9278 = EDGE_CURVE('',#9271,#9279,#9281,.T.); +#9279 = VERTEX_POINT('',#9280); +#9280 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#9281 = LINE('',#9282,#9283); +#9282 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#9283 = VECTOR('',#9284,1.); +#9284 = DIRECTION('',(0.,-1.,0.)); +#9285 = ORIENTED_EDGE('',*,*,#9286,.T.); +#9286 = EDGE_CURVE('',#9279,#9287,#9289,.T.); +#9287 = VERTEX_POINT('',#9288); +#9288 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#9289 = LINE('',#9290,#9291); +#9290 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#9291 = VECTOR('',#9292,1.); +#9292 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#9293 = ORIENTED_EDGE('',*,*,#9294,.T.); +#9294 = EDGE_CURVE('',#9287,#9200,#9295,.T.); +#9295 = LINE('',#9296,#9297); +#9296 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#9297 = VECTOR('',#9298,1.); +#9298 = DIRECTION('',(-1.,0.,0.)); +#9299 = PLANE('',#9300); +#9300 = AXIS2_PLACEMENT_3D('',#9301,#9302,#9303); +#9301 = CARTESIAN_POINT('',(-0.8375,1.101047627727E-17,0.675)); +#9302 = DIRECTION('',(-4.586476420025E-27,1.633860438167E-31,-1.)); +#9303 = DIRECTION('',(1.568703130043E-18,1.,1.633860438167E-31)); +#9304 = ADVANCED_FACE('',(#9305),#9374,.F.); +#9305 = FACE_BOUND('',#9306,.F.); +#9306 = EDGE_LOOP('',(#9307,#9308,#9309,#9317,#9326,#9334,#9342,#9350, + #9359,#9367)); +#9307 = ORIENTED_EDGE('',*,*,#8941,.F.); +#9308 = ORIENTED_EDGE('',*,*,#8981,.T.); +#9309 = ORIENTED_EDGE('',*,*,#9310,.T.); +#9310 = EDGE_CURVE('',#8974,#9311,#9313,.T.); +#9311 = VERTEX_POINT('',#9312); +#9312 = CARTESIAN_POINT('',(-0.964779134804,-0.175,0.181797400913)); +#9313 = LINE('',#9314,#9315); +#9314 = CARTESIAN_POINT('',(-0.918936542711,-0.175,0.467155372437)); +#9315 = VECTOR('',#9316,1.); +#9316 = DIRECTION('',(-0.158615661317,1.760987592604E-17,-0.987340403298 + )); +#9317 = ORIENTED_EDGE('',*,*,#9318,.T.); +#9318 = EDGE_CURVE('',#9311,#9319,#9321,.T.); +#9319 = VERTEX_POINT('',#9320); +#9320 = CARTESIAN_POINT('',(-1.181436840466,-0.175,-5.551115123126E-17) + ); +#9321 = CIRCLE('',#9322,0.22); +#9322 = AXIS2_PLACEMENT_3D('',#9323,#9324,#9325); +#9323 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.22)); +#9324 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9325 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#9326 = ORIENTED_EDGE('',*,*,#9327,.T.); +#9327 = EDGE_CURVE('',#9319,#9328,#9330,.T.); +#9328 = VERTEX_POINT('',#9329); +#9329 = CARTESIAN_POINT('',(-1.25,-0.175,-5.551115123126E-17)); +#9330 = LINE('',#9331,#9332); +#9331 = CARTESIAN_POINT('',(-1.181436840466,-0.175,-5.551115123126E-17) + ); +#9332 = VECTOR('',#9333,1.); +#9333 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#9334 = ORIENTED_EDGE('',*,*,#9335,.T.); +#9335 = EDGE_CURVE('',#9328,#9336,#9338,.T.); +#9336 = VERTEX_POINT('',#9337); +#9337 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#9338 = LINE('',#9339,#9340); +#9339 = CARTESIAN_POINT('',(-1.25,-0.175,-5.551115123126E-17)); +#9340 = VECTOR('',#9341,1.); +#9341 = DIRECTION('',(0.,0.,1.)); +#9342 = ORIENTED_EDGE('',*,*,#9343,.T.); +#9343 = EDGE_CURVE('',#9336,#9344,#9346,.T.); +#9344 = VERTEX_POINT('',#9345); +#9345 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.15)); +#9346 = LINE('',#9347,#9348); +#9347 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#9348 = VECTOR('',#9349,1.); +#9349 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#9350 = ORIENTED_EDGE('',*,*,#9351,.T.); +#9351 = EDGE_CURVE('',#9344,#9352,#9354,.T.); +#9352 = VERTEX_POINT('',#9353); +#9353 = CARTESIAN_POINT('',(-1.112500297756,-0.175,0.207844627563)); +#9354 = CIRCLE('',#9355,7.E-02); +#9355 = AXIS2_PLACEMENT_3D('',#9356,#9357,#9358); +#9356 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.22)); +#9357 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#9358 = DIRECTION('',(0.,0.,-1.)); +#9359 = ORIENTED_EDGE('',*,*,#9360,.T.); +#9360 = EDGE_CURVE('',#9352,#9361,#9363,.T.); +#9361 = VERTEX_POINT('',#9362); +#9362 = CARTESIAN_POINT('',(-1.066657705663,-0.175,0.493202599087)); +#9363 = LINE('',#9364,#9365); +#9364 = CARTESIAN_POINT('',(-1.112500297756,-0.175,0.207844627563)); +#9365 = VECTOR('',#9366,1.); +#9366 = DIRECTION('',(0.158615661317,-1.760987592604E-17,0.987340403298) + ); +#9367 = ORIENTED_EDGE('',*,*,#9368,.T.); +#9368 = EDGE_CURVE('',#9361,#8942,#9369,.T.); +#9369 = CIRCLE('',#9370,0.22); +#9370 = AXIS2_PLACEMENT_3D('',#9371,#9372,#9373); +#9371 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#9372 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9373 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#9374 = PLANE('',#9375); +#9375 = AXIS2_PLACEMENT_3D('',#9376,#9377,#9378); +#9376 = CARTESIAN_POINT('',(-1.021526355437,-0.175,0.332418056697)); +#9377 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9378 = DIRECTION('',(0.,-0.,1.)); +#9379 = ADVANCED_FACE('',(#9380),#9398,.F.); +#9380 = FACE_BOUND('',#9381,.F.); +#9381 = EDGE_LOOP('',(#9382,#9383,#9391,#9397)); +#9382 = ORIENTED_EDGE('',*,*,#8973,.T.); +#9383 = ORIENTED_EDGE('',*,*,#9384,.T.); +#9384 = EDGE_CURVE('',#8965,#9385,#9387,.T.); +#9385 = VERTEX_POINT('',#9386); +#9386 = CARTESIAN_POINT('',(-0.964779134804,0.175,0.181797400913)); +#9387 = LINE('',#9388,#9389); +#9388 = CARTESIAN_POINT('',(-0.918936542711,0.175,0.467155372437)); +#9389 = VECTOR('',#9390,1.); +#9390 = DIRECTION('',(-0.158615661317,1.760987592604E-17,-0.987340403298 + )); +#9391 = ORIENTED_EDGE('',*,*,#9392,.F.); +#9392 = EDGE_CURVE('',#9311,#9385,#9393,.T.); +#9393 = LINE('',#9394,#9395); +#9394 = CARTESIAN_POINT('',(-0.964779134804,-0.175,0.181797400913)); +#9395 = VECTOR('',#9396,1.); +#9396 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9397 = ORIENTED_EDGE('',*,*,#9310,.F.); +#9398 = PLANE('',#9399); +#9399 = AXIS2_PLACEMENT_3D('',#9400,#9401,#9402); +#9400 = CARTESIAN_POINT('',(-0.918936542711,-0.175,0.467155372437)); +#9401 = DIRECTION('',(-0.987340403298,1.096168048884E-16,0.158615661317) + ); +#9402 = DIRECTION('',(-0.158615661317,1.760987592604E-17,-0.987340403298 + )); +#9403 = ADVANCED_FACE('',(#9404),#9466,.T.); +#9404 = FACE_BOUND('',#9405,.T.); +#9405 = EDGE_LOOP('',(#9406,#9407,#9408,#9409,#9418,#9426,#9434,#9442, + #9451,#9459)); +#9406 = ORIENTED_EDGE('',*,*,#8996,.F.); +#9407 = ORIENTED_EDGE('',*,*,#8964,.T.); +#9408 = ORIENTED_EDGE('',*,*,#9384,.T.); +#9409 = ORIENTED_EDGE('',*,*,#9410,.T.); +#9410 = EDGE_CURVE('',#9385,#9411,#9413,.T.); +#9411 = VERTEX_POINT('',#9412); +#9412 = CARTESIAN_POINT('',(-1.181436840466,0.175,-5.551115123126E-17)); +#9413 = CIRCLE('',#9414,0.22); +#9414 = AXIS2_PLACEMENT_3D('',#9415,#9416,#9417); +#9415 = CARTESIAN_POINT('',(-1.181436840466,0.175,0.22)); +#9416 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9417 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#9418 = ORIENTED_EDGE('',*,*,#9419,.T.); +#9419 = EDGE_CURVE('',#9411,#9420,#9422,.T.); +#9420 = VERTEX_POINT('',#9421); +#9421 = CARTESIAN_POINT('',(-1.25,0.175,-5.551115123126E-17)); +#9422 = LINE('',#9423,#9424); +#9423 = CARTESIAN_POINT('',(-1.181436840466,0.175,-5.551115123126E-17)); +#9424 = VECTOR('',#9425,1.); +#9425 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#9426 = ORIENTED_EDGE('',*,*,#9427,.T.); +#9427 = EDGE_CURVE('',#9420,#9428,#9430,.T.); +#9428 = VERTEX_POINT('',#9429); +#9429 = CARTESIAN_POINT('',(-1.25,0.175,0.15)); +#9430 = LINE('',#9431,#9432); +#9431 = CARTESIAN_POINT('',(-1.25,0.175,-5.551115123126E-17)); +#9432 = VECTOR('',#9433,1.); +#9433 = DIRECTION('',(0.,0.,1.)); +#9434 = ORIENTED_EDGE('',*,*,#9435,.T.); +#9435 = EDGE_CURVE('',#9428,#9436,#9438,.T.); +#9436 = VERTEX_POINT('',#9437); +#9437 = CARTESIAN_POINT('',(-1.181436840466,0.175,0.15)); +#9438 = LINE('',#9439,#9440); +#9439 = CARTESIAN_POINT('',(-1.25,0.175,0.15)); +#9440 = VECTOR('',#9441,1.); +#9441 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#9442 = ORIENTED_EDGE('',*,*,#9443,.T.); +#9443 = EDGE_CURVE('',#9436,#9444,#9446,.T.); +#9444 = VERTEX_POINT('',#9445); +#9445 = CARTESIAN_POINT('',(-1.112500297756,0.175,0.207844627563)); +#9446 = CIRCLE('',#9447,7.E-02); +#9447 = AXIS2_PLACEMENT_3D('',#9448,#9449,#9450); +#9448 = CARTESIAN_POINT('',(-1.181436840466,0.175,0.22)); +#9449 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#9450 = DIRECTION('',(0.,0.,-1.)); +#9451 = ORIENTED_EDGE('',*,*,#9452,.T.); +#9452 = EDGE_CURVE('',#9444,#9453,#9455,.T.); +#9453 = VERTEX_POINT('',#9454); +#9454 = CARTESIAN_POINT('',(-1.066657705663,0.175,0.493202599087)); +#9455 = LINE('',#9456,#9457); +#9456 = CARTESIAN_POINT('',(-1.112500297756,0.175,0.207844627563)); +#9457 = VECTOR('',#9458,1.); +#9458 = DIRECTION('',(0.158615661317,-1.760987592604E-17,0.987340403298) + ); +#9459 = ORIENTED_EDGE('',*,*,#9460,.T.); +#9460 = EDGE_CURVE('',#9453,#8997,#9461,.T.); +#9461 = CIRCLE('',#9462,0.22); +#9462 = AXIS2_PLACEMENT_3D('',#9463,#9464,#9465); +#9463 = CARTESIAN_POINT('',(-0.85,0.175,0.455)); +#9464 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9465 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#9466 = PLANE('',#9467); +#9467 = AXIS2_PLACEMENT_3D('',#9468,#9469,#9470); +#9468 = CARTESIAN_POINT('',(-1.021526355437,0.175,0.332418056697)); +#9469 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9470 = DIRECTION('',(0.,-0.,1.)); +#9471 = ADVANCED_FACE('',(#9472),#9554,.F.); +#9472 = FACE_BOUND('',#9473,.F.); +#9473 = EDGE_LOOP('',(#9474,#9482,#9483,#9484,#9492,#9500,#9508,#9516, + #9524,#9532,#9540,#9548)); +#9474 = ORIENTED_EDGE('',*,*,#9475,.F.); +#9475 = EDGE_CURVE('',#8997,#9476,#9478,.T.); +#9476 = VERTEX_POINT('',#9477); +#9477 = CARTESIAN_POINT('',(-0.825,0.175,0.675)); +#9478 = LINE('',#9479,#9480); +#9479 = CARTESIAN_POINT('',(-0.85,0.175,0.675)); +#9480 = VECTOR('',#9481,1.); +#9481 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#9482 = ORIENTED_EDGE('',*,*,#9012,.T.); +#9483 = ORIENTED_EDGE('',*,*,#9182,.T.); +#9484 = ORIENTED_EDGE('',*,*,#9485,.T.); +#9485 = EDGE_CURVE('',#9176,#9486,#9488,.T.); +#9486 = VERTEX_POINT('',#9487); +#9487 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#9488 = LINE('',#9489,#9490); +#9489 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#9490 = VECTOR('',#9491,1.); +#9491 = DIRECTION('',(1.,0.,0.)); +#9492 = ORIENTED_EDGE('',*,*,#9493,.T.); +#9493 = EDGE_CURVE('',#9486,#9494,#9496,.T.); +#9494 = VERTEX_POINT('',#9495); +#9495 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#9496 = LINE('',#9497,#9498); +#9497 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#9498 = VECTOR('',#9499,1.); +#9499 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#9500 = ORIENTED_EDGE('',*,*,#9501,.T.); +#9501 = EDGE_CURVE('',#9494,#9502,#9504,.T.); +#9502 = VERTEX_POINT('',#9503); +#9503 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#9504 = LINE('',#9505,#9506); +#9505 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#9506 = VECTOR('',#9507,1.); +#9507 = DIRECTION('',(0.,-1.,0.)); +#9508 = ORIENTED_EDGE('',*,*,#9509,.T.); +#9509 = EDGE_CURVE('',#9502,#9510,#9512,.T.); +#9510 = VERTEX_POINT('',#9511); +#9511 = CARTESIAN_POINT('',(0.825,0.175,0.675)); +#9512 = LINE('',#9513,#9514); +#9513 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#9514 = VECTOR('',#9515,1.); +#9515 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#9516 = ORIENTED_EDGE('',*,*,#9517,.F.); +#9517 = EDGE_CURVE('',#9518,#9510,#9520,.T.); +#9518 = VERTEX_POINT('',#9519); +#9519 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#9520 = LINE('',#9521,#9522); +#9521 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#9522 = VECTOR('',#9523,1.); +#9523 = DIRECTION('',(0.,-1.,0.)); +#9524 = ORIENTED_EDGE('',*,*,#9525,.F.); +#9525 = EDGE_CURVE('',#9526,#9518,#9528,.T.); +#9526 = VERTEX_POINT('',#9527); +#9527 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#9528 = LINE('',#9529,#9530); +#9529 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#9530 = VECTOR('',#9531,1.); +#9531 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#9532 = ORIENTED_EDGE('',*,*,#9533,.F.); +#9533 = EDGE_CURVE('',#9534,#9526,#9536,.T.); +#9534 = VERTEX_POINT('',#9535); +#9535 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#9536 = LINE('',#9537,#9538); +#9537 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#9538 = VECTOR('',#9539,1.); +#9539 = DIRECTION('',(1.,0.,0.)); +#9540 = ORIENTED_EDGE('',*,*,#9541,.F.); +#9541 = EDGE_CURVE('',#9542,#9534,#9544,.T.); +#9542 = VERTEX_POINT('',#9543); +#9543 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#9544 = LINE('',#9545,#9546); +#9545 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#9546 = VECTOR('',#9547,1.); +#9547 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#9548 = ORIENTED_EDGE('',*,*,#9549,.F.); +#9549 = EDGE_CURVE('',#9476,#9542,#9550,.T.); +#9550 = LINE('',#9551,#9552); +#9551 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#9552 = VECTOR('',#9553,1.); +#9553 = DIRECTION('',(0.,1.,0.)); +#9554 = PLANE('',#9555); +#9555 = AXIS2_PLACEMENT_3D('',#9556,#9557,#9558); +#9556 = CARTESIAN_POINT('',(-0.8375,1.101047627727E-17,0.675)); +#9557 = DIRECTION('',(-4.586476420025E-27,1.633860438167E-31,-1.)); +#9558 = DIRECTION('',(1.568703130043E-18,1.,1.633860438167E-31)); +#9559 = ADVANCED_FACE('',(#9560),#9570,.F.); +#9560 = FACE_BOUND('',#9561,.F.); +#9561 = EDGE_LOOP('',(#9562,#9563,#9564,#9565)); +#9562 = ORIENTED_EDGE('',*,*,#9051,.T.); +#9563 = ORIENTED_EDGE('',*,*,#9207,.T.); +#9564 = ORIENTED_EDGE('',*,*,#9294,.F.); +#9565 = ORIENTED_EDGE('',*,*,#9566,.F.); +#9566 = EDGE_CURVE('',#9052,#9287,#9567,.T.); +#9567 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9568,#9569),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9568 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#9569 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#9570 = PLANE('',#9571); +#9571 = AXIS2_PLACEMENT_3D('',#9572,#9573,#9574); +#9572 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#9573 = DIRECTION('',(0.,1.,0.)); +#9574 = DIRECTION('',(-1.,0.,0.)); +#9575 = ADVANCED_FACE('',(#9576),#9586,.F.); +#9576 = FACE_BOUND('',#9577,.F.); +#9577 = EDGE_LOOP('',(#9578,#9579,#9584,#9585)); +#9578 = ORIENTED_EDGE('',*,*,#9080,.T.); +#9579 = ORIENTED_EDGE('',*,*,#9580,.T.); +#9580 = EDGE_CURVE('',#9074,#9486,#9581,.T.); +#9581 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9582,#9583),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9582 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#9583 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#9584 = ORIENTED_EDGE('',*,*,#9485,.F.); +#9585 = ORIENTED_EDGE('',*,*,#9175,.F.); +#9586 = PLANE('',#9587); +#9587 = AXIS2_PLACEMENT_3D('',#9588,#9589,#9590); +#9588 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#9589 = DIRECTION('',(0.,-1.,0.)); +#9590 = DIRECTION('',(1.,0.,0.)); +#9591 = ADVANCED_FACE('',(#9592),#9602,.F.); +#9592 = FACE_BOUND('',#9593,.F.); +#9593 = EDGE_LOOP('',(#9594,#9595,#9596,#9597)); +#9594 = ORIENTED_EDGE('',*,*,#9097,.T.); +#9595 = ORIENTED_EDGE('',*,*,#9566,.T.); +#9596 = ORIENTED_EDGE('',*,*,#9286,.F.); +#9597 = ORIENTED_EDGE('',*,*,#9598,.F.); +#9598 = EDGE_CURVE('',#9098,#9279,#9599,.T.); +#9599 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9600,#9601),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9600 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#9601 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#9602 = PLANE('',#9603); +#9603 = AXIS2_PLACEMENT_3D('',#9604,#9605,#9606); +#9604 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#9605 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#9606 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#9607 = ADVANCED_FACE('',(#9608),#9618,.F.); +#9608 = FACE_BOUND('',#9609,.F.); +#9609 = EDGE_LOOP('',(#9610,#9611,#9616,#9617)); +#9610 = ORIENTED_EDGE('',*,*,#9126,.T.); +#9611 = ORIENTED_EDGE('',*,*,#9612,.T.); +#9612 = EDGE_CURVE('',#9120,#9494,#9613,.T.); +#9613 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9614,#9615),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9614 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#9615 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#9616 = ORIENTED_EDGE('',*,*,#9493,.F.); +#9617 = ORIENTED_EDGE('',*,*,#9580,.F.); +#9618 = PLANE('',#9619); +#9619 = AXIS2_PLACEMENT_3D('',#9620,#9621,#9622); +#9620 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#9621 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#9622 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#9623 = ADVANCED_FACE('',(#9624),#9635,.F.); +#9624 = FACE_BOUND('',#9625,.F.); +#9625 = EDGE_LOOP('',(#9626,#9627,#9628,#9634)); +#9626 = ORIENTED_EDGE('',*,*,#9612,.F.); +#9627 = ORIENTED_EDGE('',*,*,#9159,.T.); +#9628 = ORIENTED_EDGE('',*,*,#9629,.T.); +#9629 = EDGE_CURVE('',#9152,#9502,#9630,.T.); +#9630 = LINE('',#9631,#9632); +#9631 = CARTESIAN_POINT('',(0.85,0.175,0.503709028349)); +#9632 = VECTOR('',#9633,1.); +#9633 = DIRECTION('',(0.,0.,1.)); +#9634 = ORIENTED_EDGE('',*,*,#9501,.F.); +#9635 = PLANE('',#9636); +#9636 = AXIS2_PLACEMENT_3D('',#9637,#9638,#9639); +#9637 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#9638 = DIRECTION('',(-1.,0.,0.)); +#9639 = DIRECTION('',(0.,-1.,0.)); +#9640 = ADVANCED_FACE('',(#9641),#9668,.F.); +#9641 = FACE_BOUND('',#9642,.F.); +#9642 = EDGE_LOOP('',(#9643,#9644,#9653,#9661)); +#9643 = ORIENTED_EDGE('',*,*,#9151,.T.); +#9644 = ORIENTED_EDGE('',*,*,#9645,.T.); +#9645 = EDGE_CURVE('',#9144,#9646,#9648,.T.); +#9646 = VERTEX_POINT('',#9647); +#9647 = CARTESIAN_POINT('',(0.918936542711,-0.175,0.467155372437)); +#9648 = CIRCLE('',#9649,7.E-02); +#9649 = AXIS2_PLACEMENT_3D('',#9650,#9651,#9652); +#9650 = CARTESIAN_POINT('',(0.85,-0.175,0.455)); +#9651 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#9652 = DIRECTION('',(0.,0.,1.)); +#9653 = ORIENTED_EDGE('',*,*,#9654,.F.); +#9654 = EDGE_CURVE('',#9655,#9646,#9657,.T.); +#9655 = VERTEX_POINT('',#9656); +#9656 = CARTESIAN_POINT('',(0.918936542711,0.175,0.467155372437)); +#9657 = LINE('',#9658,#9659); +#9658 = CARTESIAN_POINT('',(0.918936542711,0.175,0.467155372437)); +#9659 = VECTOR('',#9660,1.); +#9660 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#9661 = ORIENTED_EDGE('',*,*,#9662,.F.); +#9662 = EDGE_CURVE('',#9152,#9655,#9663,.T.); +#9663 = CIRCLE('',#9664,7.E-02); +#9664 = AXIS2_PLACEMENT_3D('',#9665,#9666,#9667); +#9665 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#9666 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#9667 = DIRECTION('',(0.,0.,1.)); +#9668 = CYLINDRICAL_SURFACE('',#9669,7.E-02); +#9669 = AXIS2_PLACEMENT_3D('',#9670,#9671,#9672); +#9670 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#9671 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#9672 = DIRECTION('',(0.,-0.,1.)); +#9673 = ADVANCED_FACE('',(#9674),#9685,.F.); +#9674 = FACE_BOUND('',#9675,.F.); +#9675 = EDGE_LOOP('',(#9676,#9682,#9683,#9684)); +#9676 = ORIENTED_EDGE('',*,*,#9677,.F.); +#9677 = EDGE_CURVE('',#9144,#9271,#9678,.T.); +#9678 = LINE('',#9679,#9680); +#9679 = CARTESIAN_POINT('',(0.85,-0.175,0.503709028349)); +#9680 = VECTOR('',#9681,1.); +#9681 = DIRECTION('',(0.,0.,1.)); +#9682 = ORIENTED_EDGE('',*,*,#9143,.T.); +#9683 = ORIENTED_EDGE('',*,*,#9598,.T.); +#9684 = ORIENTED_EDGE('',*,*,#9278,.F.); +#9685 = PLANE('',#9686); +#9686 = AXIS2_PLACEMENT_3D('',#9687,#9688,#9689); +#9687 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#9688 = DIRECTION('',(-1.,0.,0.)); +#9689 = DIRECTION('',(0.,-1.,0.)); +#9690 = ADVANCED_FACE('',(#9691),#9707,.F.); +#9691 = FACE_BOUND('',#9692,.F.); +#9692 = EDGE_LOOP('',(#9693,#9694,#9700,#9701)); +#9693 = ORIENTED_EDGE('',*,*,#9509,.F.); +#9694 = ORIENTED_EDGE('',*,*,#9695,.T.); +#9695 = EDGE_CURVE('',#9502,#9271,#9696,.T.); +#9696 = LINE('',#9697,#9698); +#9697 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#9698 = VECTOR('',#9699,1.); +#9699 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#9700 = ORIENTED_EDGE('',*,*,#9270,.T.); +#9701 = ORIENTED_EDGE('',*,*,#9702,.F.); +#9702 = EDGE_CURVE('',#9510,#9263,#9703,.T.); +#9703 = LINE('',#9704,#9705); +#9704 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#9705 = VECTOR('',#9706,1.); +#9706 = DIRECTION('',(0.,-1.,0.)); +#9707 = PLANE('',#9708); +#9708 = AXIS2_PLACEMENT_3D('',#9709,#9710,#9711); +#9709 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#9710 = DIRECTION('',(0.,0.,-1.)); +#9711 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#9712 = ADVANCED_FACE('',(#9713),#9738,.F.); +#9713 = FACE_BOUND('',#9714,.F.); +#9714 = EDGE_LOOP('',(#9715,#9716,#9717,#9718,#9725,#9733)); +#9715 = ORIENTED_EDGE('',*,*,#9517,.T.); +#9716 = ORIENTED_EDGE('',*,*,#9702,.T.); +#9717 = ORIENTED_EDGE('',*,*,#9262,.T.); +#9718 = ORIENTED_EDGE('',*,*,#9719,.T.); +#9719 = EDGE_CURVE('',#9255,#9720,#9722,.T.); +#9720 = VERTEX_POINT('',#9721); +#9721 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#9722 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9723,#9724),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9723 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#9724 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#9725 = ORIENTED_EDGE('',*,*,#9726,.F.); +#9726 = EDGE_CURVE('',#9727,#9720,#9729,.T.); +#9727 = VERTEX_POINT('',#9728); +#9728 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#9729 = LINE('',#9730,#9731); +#9730 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#9731 = VECTOR('',#9732,1.); +#9732 = DIRECTION('',(0.,-1.,0.)); +#9733 = ORIENTED_EDGE('',*,*,#9734,.F.); +#9734 = EDGE_CURVE('',#9518,#9727,#9735,.T.); +#9735 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9736,#9737),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9736 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#9737 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#9738 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9739,#9740) + ,(#9741,#9742 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.035),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#9739 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#9740 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#9741 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#9742 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#9743 = ADVANCED_FACE('',(#9744),#9761,.F.); +#9744 = FACE_BOUND('',#9745,.F.); +#9745 = EDGE_LOOP('',(#9746,#9747,#9754,#9760)); +#9746 = ORIENTED_EDGE('',*,*,#9254,.T.); +#9747 = ORIENTED_EDGE('',*,*,#9748,.T.); +#9748 = EDGE_CURVE('',#9247,#9749,#9751,.T.); +#9749 = VERTEX_POINT('',#9750); +#9750 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#9751 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9752,#9753),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9752 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#9753 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#9754 = ORIENTED_EDGE('',*,*,#9755,.F.); +#9755 = EDGE_CURVE('',#9720,#9749,#9756,.T.); +#9756 = LINE('',#9757,#9758); +#9757 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#9758 = VECTOR('',#9759,1.); +#9759 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#9760 = ORIENTED_EDGE('',*,*,#9719,.F.); +#9761 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9762,#9763) + ,(#9764,#9765 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#9762 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#9763 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#9764 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#9765 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#9766 = ADVANCED_FACE('',(#9767),#9784,.F.); +#9767 = FACE_BOUND('',#9768,.F.); +#9768 = EDGE_LOOP('',(#9769,#9770,#9777,#9783)); +#9769 = ORIENTED_EDGE('',*,*,#9246,.T.); +#9770 = ORIENTED_EDGE('',*,*,#9771,.T.); +#9771 = EDGE_CURVE('',#9239,#9772,#9774,.T.); +#9772 = VERTEX_POINT('',#9773); +#9773 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#9774 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9775,#9776),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9775 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#9776 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#9777 = ORIENTED_EDGE('',*,*,#9778,.F.); +#9778 = EDGE_CURVE('',#9749,#9772,#9779,.T.); +#9779 = LINE('',#9780,#9781); +#9780 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#9781 = VECTOR('',#9782,1.); +#9782 = DIRECTION('',(-1.,0.,0.)); +#9783 = ORIENTED_EDGE('',*,*,#9748,.F.); +#9784 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9785,#9786) + ,(#9787,#9788 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.485),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#9785 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#9786 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#9787 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#9788 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#9789 = ADVANCED_FACE('',(#9790),#9807,.F.); +#9790 = FACE_BOUND('',#9791,.F.); +#9791 = EDGE_LOOP('',(#9792,#9793,#9800,#9806)); +#9792 = ORIENTED_EDGE('',*,*,#9238,.T.); +#9793 = ORIENTED_EDGE('',*,*,#9794,.T.); +#9794 = EDGE_CURVE('',#9231,#9795,#9797,.T.); +#9795 = VERTEX_POINT('',#9796); +#9796 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#9797 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9798,#9799),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9798 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#9799 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#9800 = ORIENTED_EDGE('',*,*,#9801,.F.); +#9801 = EDGE_CURVE('',#9772,#9795,#9802,.T.); +#9802 = LINE('',#9803,#9804); +#9803 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#9804 = VECTOR('',#9805,1.); +#9805 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#9806 = ORIENTED_EDGE('',*,*,#9771,.F.); +#9807 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9808,#9809) + ,(#9810,#9811 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#9808 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#9809 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#9810 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#9811 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#9812 = ADVANCED_FACE('',(#9813),#9837,.F.); +#9813 = FACE_BOUND('',#9814,.F.); +#9814 = EDGE_LOOP('',(#9815,#9816,#9822,#9823,#9830,#9836)); +#9815 = ORIENTED_EDGE('',*,*,#9230,.T.); +#9816 = ORIENTED_EDGE('',*,*,#9817,.T.); +#9817 = EDGE_CURVE('',#9223,#9476,#9818,.T.); +#9818 = LINE('',#9819,#9820); +#9819 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#9820 = VECTOR('',#9821,1.); +#9821 = DIRECTION('',(0.,1.,0.)); +#9822 = ORIENTED_EDGE('',*,*,#9549,.T.); +#9823 = ORIENTED_EDGE('',*,*,#9824,.T.); +#9824 = EDGE_CURVE('',#9542,#9825,#9827,.T.); +#9825 = VERTEX_POINT('',#9826); +#9826 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#9827 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9828,#9829),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9828 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#9829 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#9830 = ORIENTED_EDGE('',*,*,#9831,.F.); +#9831 = EDGE_CURVE('',#9795,#9825,#9832,.T.); +#9832 = LINE('',#9833,#9834); +#9833 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#9834 = VECTOR('',#9835,1.); +#9835 = DIRECTION('',(0.,1.,0.)); +#9836 = ORIENTED_EDGE('',*,*,#9794,.F.); +#9837 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9838,#9839) + ,(#9840,#9841 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.035),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#9838 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#9839 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#9840 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#9841 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#9842 = ADVANCED_FACE('',(#9843),#9854,.F.); +#9843 = FACE_BOUND('',#9844,.F.); +#9844 = EDGE_LOOP('',(#9845,#9846,#9852,#9853)); +#9845 = ORIENTED_EDGE('',*,*,#9222,.F.); +#9846 = ORIENTED_EDGE('',*,*,#9847,.T.); +#9847 = EDGE_CURVE('',#8942,#8997,#9848,.T.); +#9848 = LINE('',#9849,#9850); +#9849 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#9850 = VECTOR('',#9851,1.); +#9851 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9852 = ORIENTED_EDGE('',*,*,#9475,.T.); +#9853 = ORIENTED_EDGE('',*,*,#9817,.F.); +#9854 = PLANE('',#9855); +#9855 = AXIS2_PLACEMENT_3D('',#9856,#9857,#9858); +#9856 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#9857 = DIRECTION('',(0.,0.,-1.)); +#9858 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#9859 = ADVANCED_FACE('',(#9860),#9871,.T.); +#9860 = FACE_BOUND('',#9861,.T.); +#9861 = EDGE_LOOP('',(#9862,#9863,#9864,#9865)); +#9862 = ORIENTED_EDGE('',*,*,#9368,.T.); +#9863 = ORIENTED_EDGE('',*,*,#9847,.T.); +#9864 = ORIENTED_EDGE('',*,*,#9460,.F.); +#9865 = ORIENTED_EDGE('',*,*,#9866,.F.); +#9866 = EDGE_CURVE('',#9361,#9453,#9867,.T.); +#9867 = LINE('',#9868,#9869); +#9868 = CARTESIAN_POINT('',(-1.066657705663,-0.175,0.493202599087)); +#9869 = VECTOR('',#9870,1.); +#9870 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9871 = CYLINDRICAL_SURFACE('',#9872,0.22); +#9872 = AXIS2_PLACEMENT_3D('',#9873,#9874,#9875); +#9873 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#9874 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#9875 = DIRECTION('',(-0.984807753012,1.093356242223E-16,0.173648177667) + ); +#9876 = ADVANCED_FACE('',(#9877),#9888,.F.); +#9877 = FACE_BOUND('',#9878,.F.); +#9878 = EDGE_LOOP('',(#9879,#9885,#9886,#9887)); +#9879 = ORIENTED_EDGE('',*,*,#9880,.T.); +#9880 = EDGE_CURVE('',#9352,#9444,#9881,.T.); +#9881 = LINE('',#9882,#9883); +#9882 = CARTESIAN_POINT('',(-1.112500297756,-0.175,0.207844627563)); +#9883 = VECTOR('',#9884,1.); +#9884 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9885 = ORIENTED_EDGE('',*,*,#9452,.T.); +#9886 = ORIENTED_EDGE('',*,*,#9866,.F.); +#9887 = ORIENTED_EDGE('',*,*,#9360,.F.); +#9888 = PLANE('',#9889); +#9889 = AXIS2_PLACEMENT_3D('',#9890,#9891,#9892); +#9890 = CARTESIAN_POINT('',(-1.112500297756,-0.175,0.207844627563)); +#9891 = DIRECTION('',(0.987340403298,-1.096168048884E-16,-0.158615661317 + )); +#9892 = DIRECTION('',(0.158615661317,-1.760987592604E-17,0.987340403298) + ); +#9893 = ADVANCED_FACE('',(#9894),#9905,.F.); +#9894 = FACE_BOUND('',#9895,.F.); +#9895 = EDGE_LOOP('',(#9896,#9902,#9903,#9904)); +#9896 = ORIENTED_EDGE('',*,*,#9897,.T.); +#9897 = EDGE_CURVE('',#9344,#9436,#9898,.T.); +#9898 = LINE('',#9899,#9900); +#9899 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.15)); +#9900 = VECTOR('',#9901,1.); +#9901 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9902 = ORIENTED_EDGE('',*,*,#9443,.T.); +#9903 = ORIENTED_EDGE('',*,*,#9880,.F.); +#9904 = ORIENTED_EDGE('',*,*,#9351,.F.); +#9905 = CYLINDRICAL_SURFACE('',#9906,7.E-02); +#9906 = AXIS2_PLACEMENT_3D('',#9907,#9908,#9909); +#9907 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.22)); +#9908 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#9909 = DIRECTION('',(-0.,0.,-1.)); +#9910 = ADVANCED_FACE('',(#9911),#9922,.F.); +#9911 = FACE_BOUND('',#9912,.F.); +#9912 = EDGE_LOOP('',(#9913,#9919,#9920,#9921)); +#9913 = ORIENTED_EDGE('',*,*,#9914,.T.); +#9914 = EDGE_CURVE('',#9336,#9428,#9915,.T.); +#9915 = LINE('',#9916,#9917); +#9916 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#9917 = VECTOR('',#9918,1.); +#9918 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9919 = ORIENTED_EDGE('',*,*,#9435,.T.); +#9920 = ORIENTED_EDGE('',*,*,#9897,.F.); +#9921 = ORIENTED_EDGE('',*,*,#9343,.F.); +#9922 = PLANE('',#9923); +#9923 = AXIS2_PLACEMENT_3D('',#9924,#9925,#9926); +#9924 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#9925 = DIRECTION('',(0.,0.,-1.)); +#9926 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#9927 = ADVANCED_FACE('',(#9928),#9939,.F.); +#9928 = FACE_BOUND('',#9929,.F.); +#9929 = EDGE_LOOP('',(#9930,#9936,#9937,#9938)); +#9930 = ORIENTED_EDGE('',*,*,#9931,.T.); +#9931 = EDGE_CURVE('',#9328,#9420,#9932,.T.); +#9932 = LINE('',#9933,#9934); +#9933 = CARTESIAN_POINT('',(-1.25,-0.175,-5.551115123126E-17)); +#9934 = VECTOR('',#9935,1.); +#9935 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9936 = ORIENTED_EDGE('',*,*,#9427,.T.); +#9937 = ORIENTED_EDGE('',*,*,#9914,.F.); +#9938 = ORIENTED_EDGE('',*,*,#9335,.F.); +#9939 = PLANE('',#9940); +#9940 = AXIS2_PLACEMENT_3D('',#9941,#9942,#9943); +#9941 = CARTESIAN_POINT('',(-1.25,-0.175,-5.551115123126E-17)); +#9942 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#9943 = DIRECTION('',(0.,0.,1.)); +#9944 = ADVANCED_FACE('',(#9945),#9956,.F.); +#9945 = FACE_BOUND('',#9946,.F.); +#9946 = EDGE_LOOP('',(#9947,#9953,#9954,#9955)); +#9947 = ORIENTED_EDGE('',*,*,#9948,.T.); +#9948 = EDGE_CURVE('',#9319,#9411,#9949,.T.); +#9949 = LINE('',#9950,#9951); +#9950 = CARTESIAN_POINT('',(-1.181436840466,-0.175,-5.551115123126E-17) + ); +#9951 = VECTOR('',#9952,1.); +#9952 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#9953 = ORIENTED_EDGE('',*,*,#9419,.T.); +#9954 = ORIENTED_EDGE('',*,*,#9931,.F.); +#9955 = ORIENTED_EDGE('',*,*,#9327,.F.); +#9956 = PLANE('',#9957); +#9957 = AXIS2_PLACEMENT_3D('',#9958,#9959,#9960); +#9958 = CARTESIAN_POINT('',(-1.181436840466,-0.175,-5.551115123126E-17) + ); +#9959 = DIRECTION('',(0.,0.,1.)); +#9960 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#9961 = ADVANCED_FACE('',(#9962),#9968,.T.); +#9962 = FACE_BOUND('',#9963,.T.); +#9963 = EDGE_LOOP('',(#9964,#9965,#9966,#9967)); +#9964 = ORIENTED_EDGE('',*,*,#9318,.T.); +#9965 = ORIENTED_EDGE('',*,*,#9948,.T.); +#9966 = ORIENTED_EDGE('',*,*,#9410,.F.); +#9967 = ORIENTED_EDGE('',*,*,#9392,.F.); +#9968 = CYLINDRICAL_SURFACE('',#9969,0.22); +#9969 = AXIS2_PLACEMENT_3D('',#9970,#9971,#9972); +#9970 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.22)); +#9971 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#9972 = DIRECTION('',(0.984807753012,-1.093356242223E-16,-0.173648177667 + )); +#9973 = ADVANCED_FACE('',(#9974),#9991,.F.); +#9974 = FACE_BOUND('',#9975,.F.); +#9975 = EDGE_LOOP('',(#9976,#9977,#9984,#9990)); +#9976 = ORIENTED_EDGE('',*,*,#9541,.T.); +#9977 = ORIENTED_EDGE('',*,*,#9978,.T.); +#9978 = EDGE_CURVE('',#9534,#9979,#9981,.T.); +#9979 = VERTEX_POINT('',#9980); +#9980 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#9981 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9982,#9983),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#9982 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#9983 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#9984 = ORIENTED_EDGE('',*,*,#9985,.F.); +#9985 = EDGE_CURVE('',#9825,#9979,#9986,.T.); +#9986 = LINE('',#9987,#9988); +#9987 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#9988 = VECTOR('',#9989,1.); +#9989 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#9990 = ORIENTED_EDGE('',*,*,#9824,.F.); +#9991 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#9992,#9993) + ,(#9994,#9995 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#9992 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#9993 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#9994 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#9995 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#9996 = ADVANCED_FACE('',(#9997),#10014,.F.); +#9997 = FACE_BOUND('',#9998,.F.); +#9998 = EDGE_LOOP('',(#9999,#10000,#10007,#10013)); +#9999 = ORIENTED_EDGE('',*,*,#9533,.T.); +#10000 = ORIENTED_EDGE('',*,*,#10001,.T.); +#10001 = EDGE_CURVE('',#9526,#10002,#10004,.T.); +#10002 = VERTEX_POINT('',#10003); +#10003 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#10004 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10005,#10006),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10005 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#10006 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#10007 = ORIENTED_EDGE('',*,*,#10008,.F.); +#10008 = EDGE_CURVE('',#9979,#10002,#10009,.T.); +#10009 = LINE('',#10010,#10011); +#10010 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#10011 = VECTOR('',#10012,1.); +#10012 = DIRECTION('',(1.,0.,0.)); +#10013 = ORIENTED_EDGE('',*,*,#9978,.F.); +#10014 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10015,#10016) + ,(#10017,#10018 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.485),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#10015 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#10016 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#10017 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#10018 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#10019 = ADVANCED_FACE('',(#10020),#10031,.F.); +#10020 = FACE_BOUND('',#10021,.F.); +#10021 = EDGE_LOOP('',(#10022,#10023,#10024,#10030)); +#10022 = ORIENTED_EDGE('',*,*,#9525,.T.); +#10023 = ORIENTED_EDGE('',*,*,#9734,.T.); +#10024 = ORIENTED_EDGE('',*,*,#10025,.F.); +#10025 = EDGE_CURVE('',#10002,#9727,#10026,.T.); +#10026 = LINE('',#10027,#10028); +#10027 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#10028 = VECTOR('',#10029,1.); +#10029 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#10030 = ORIENTED_EDGE('',*,*,#10001,.F.); +#10031 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10032,#10033) + ,(#10034,#10035 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#10032 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#10033 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#10034 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#10035 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#10036 = ADVANCED_FACE('',(#10037),#10106,.F.); +#10037 = FACE_BOUND('',#10038,.F.); +#10038 = EDGE_LOOP('',(#10039,#10040,#10041,#10049,#10058,#10066,#10074, + #10082,#10091,#10099)); +#10039 = ORIENTED_EDGE('',*,*,#9629,.F.); +#10040 = ORIENTED_EDGE('',*,*,#9662,.T.); +#10041 = ORIENTED_EDGE('',*,*,#10042,.T.); +#10042 = EDGE_CURVE('',#9655,#10043,#10045,.T.); +#10043 = VERTEX_POINT('',#10044); +#10044 = CARTESIAN_POINT('',(0.964779134804,0.175,0.181797400913)); +#10045 = LINE('',#10046,#10047); +#10046 = CARTESIAN_POINT('',(0.918936542711,0.175,0.467155372437)); +#10047 = VECTOR('',#10048,1.); +#10048 = DIRECTION('',(0.158615661317,-3.521975185208E-17, + -0.987340403298)); +#10049 = ORIENTED_EDGE('',*,*,#10050,.T.); +#10050 = EDGE_CURVE('',#10043,#10051,#10053,.T.); +#10051 = VERTEX_POINT('',#10052); +#10052 = CARTESIAN_POINT('',(1.181436840466,0.175,-5.551115123126E-17)); +#10053 = CIRCLE('',#10054,0.22); +#10054 = AXIS2_PLACEMENT_3D('',#10055,#10056,#10057); +#10055 = CARTESIAN_POINT('',(1.181436840466,0.175,0.22)); +#10056 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10057 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#10058 = ORIENTED_EDGE('',*,*,#10059,.T.); +#10059 = EDGE_CURVE('',#10051,#10060,#10062,.T.); +#10060 = VERTEX_POINT('',#10061); +#10061 = CARTESIAN_POINT('',(1.25,0.175,-5.551115123126E-17)); +#10062 = LINE('',#10063,#10064); +#10063 = CARTESIAN_POINT('',(1.181436840466,0.175,-5.551115123126E-17)); +#10064 = VECTOR('',#10065,1.); +#10065 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#10066 = ORIENTED_EDGE('',*,*,#10067,.T.); +#10067 = EDGE_CURVE('',#10060,#10068,#10070,.T.); +#10068 = VERTEX_POINT('',#10069); +#10069 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#10070 = LINE('',#10071,#10072); +#10071 = CARTESIAN_POINT('',(1.25,0.175,-5.551115123126E-17)); +#10072 = VECTOR('',#10073,1.); +#10073 = DIRECTION('',(0.,0.,1.)); +#10074 = ORIENTED_EDGE('',*,*,#10075,.T.); +#10075 = EDGE_CURVE('',#10068,#10076,#10078,.T.); +#10076 = VERTEX_POINT('',#10077); +#10077 = CARTESIAN_POINT('',(1.181436840466,0.175,0.15)); +#10078 = LINE('',#10079,#10080); +#10079 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#10080 = VECTOR('',#10081,1.); +#10081 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#10082 = ORIENTED_EDGE('',*,*,#10083,.T.); +#10083 = EDGE_CURVE('',#10076,#10084,#10086,.T.); +#10084 = VERTEX_POINT('',#10085); +#10085 = CARTESIAN_POINT('',(1.112500297756,0.175,0.207844627563)); +#10086 = CIRCLE('',#10087,7.E-02); +#10087 = AXIS2_PLACEMENT_3D('',#10088,#10089,#10090); +#10088 = CARTESIAN_POINT('',(1.181436840466,0.175,0.22)); +#10089 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#10090 = DIRECTION('',(0.,0.,-1.)); +#10091 = ORIENTED_EDGE('',*,*,#10092,.T.); +#10092 = EDGE_CURVE('',#10084,#10093,#10095,.T.); +#10093 = VERTEX_POINT('',#10094); +#10094 = CARTESIAN_POINT('',(1.066657705663,0.175,0.493202599087)); +#10095 = LINE('',#10096,#10097); +#10096 = CARTESIAN_POINT('',(1.112500297756,0.175,0.207844627563)); +#10097 = VECTOR('',#10098,1.); +#10098 = DIRECTION('',(-0.158615661317,3.521975185208E-17,0.987340403298 + )); +#10099 = ORIENTED_EDGE('',*,*,#10100,.T.); +#10100 = EDGE_CURVE('',#10093,#9502,#10101,.T.); +#10101 = CIRCLE('',#10102,0.22); +#10102 = AXIS2_PLACEMENT_3D('',#10103,#10104,#10105); +#10103 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#10104 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10105 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667 + )); +#10106 = PLANE('',#10107); +#10107 = AXIS2_PLACEMENT_3D('',#10108,#10109,#10110); +#10108 = CARTESIAN_POINT('',(1.021526355437,0.175,0.332418056697)); +#10109 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10110 = DIRECTION('',(0.,0.,1.)); +#10111 = ADVANCED_FACE('',(#10112),#10130,.F.); +#10112 = FACE_BOUND('',#10113,.F.); +#10113 = EDGE_LOOP('',(#10114,#10115,#10123,#10129)); +#10114 = ORIENTED_EDGE('',*,*,#9654,.T.); +#10115 = ORIENTED_EDGE('',*,*,#10116,.T.); +#10116 = EDGE_CURVE('',#9646,#10117,#10119,.T.); +#10117 = VERTEX_POINT('',#10118); +#10118 = CARTESIAN_POINT('',(0.964779134804,-0.175,0.181797400913)); +#10119 = LINE('',#10120,#10121); +#10120 = CARTESIAN_POINT('',(0.918936542711,-0.175,0.467155372437)); +#10121 = VECTOR('',#10122,1.); +#10122 = DIRECTION('',(0.158615661317,-3.521975185208E-17, + -0.987340403298)); +#10123 = ORIENTED_EDGE('',*,*,#10124,.F.); +#10124 = EDGE_CURVE('',#10043,#10117,#10125,.T.); +#10125 = LINE('',#10126,#10127); +#10126 = CARTESIAN_POINT('',(0.964779134804,0.175,0.181797400913)); +#10127 = VECTOR('',#10128,1.); +#10128 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10129 = ORIENTED_EDGE('',*,*,#10042,.F.); +#10130 = PLANE('',#10131); +#10131 = AXIS2_PLACEMENT_3D('',#10132,#10133,#10134); +#10132 = CARTESIAN_POINT('',(0.918936542711,0.175,0.467155372437)); +#10133 = DIRECTION('',(0.987340403298,-2.192336097769E-16,0.158615661317 + )); +#10134 = DIRECTION('',(0.158615661317,-3.521975185208E-17, + -0.987340403298)); +#10135 = ADVANCED_FACE('',(#10136),#10198,.T.); +#10136 = FACE_BOUND('',#10137,.T.); +#10137 = EDGE_LOOP('',(#10138,#10139,#10140,#10141,#10150,#10158,#10166, + #10174,#10183,#10191)); +#10138 = ORIENTED_EDGE('',*,*,#9677,.F.); +#10139 = ORIENTED_EDGE('',*,*,#9645,.T.); +#10140 = ORIENTED_EDGE('',*,*,#10116,.T.); +#10141 = ORIENTED_EDGE('',*,*,#10142,.T.); +#10142 = EDGE_CURVE('',#10117,#10143,#10145,.T.); +#10143 = VERTEX_POINT('',#10144); +#10144 = CARTESIAN_POINT('',(1.181436840466,-0.175,-5.551115123126E-17) + ); +#10145 = CIRCLE('',#10146,0.22); +#10146 = AXIS2_PLACEMENT_3D('',#10147,#10148,#10149); +#10147 = CARTESIAN_POINT('',(1.181436840466,-0.175,0.22)); +#10148 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10149 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#10150 = ORIENTED_EDGE('',*,*,#10151,.T.); +#10151 = EDGE_CURVE('',#10143,#10152,#10154,.T.); +#10152 = VERTEX_POINT('',#10153); +#10153 = CARTESIAN_POINT('',(1.25,-0.175,-5.551115123126E-17)); +#10154 = LINE('',#10155,#10156); +#10155 = CARTESIAN_POINT('',(1.181436840466,-0.175,-5.551115123126E-17) + ); +#10156 = VECTOR('',#10157,1.); +#10157 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#10158 = ORIENTED_EDGE('',*,*,#10159,.T.); +#10159 = EDGE_CURVE('',#10152,#10160,#10162,.T.); +#10160 = VERTEX_POINT('',#10161); +#10161 = CARTESIAN_POINT('',(1.25,-0.175,0.15)); +#10162 = LINE('',#10163,#10164); +#10163 = CARTESIAN_POINT('',(1.25,-0.175,-5.551115123126E-17)); +#10164 = VECTOR('',#10165,1.); +#10165 = DIRECTION('',(0.,0.,1.)); +#10166 = ORIENTED_EDGE('',*,*,#10167,.T.); +#10167 = EDGE_CURVE('',#10160,#10168,#10170,.T.); +#10168 = VERTEX_POINT('',#10169); +#10169 = CARTESIAN_POINT('',(1.181436840466,-0.175,0.15)); +#10170 = LINE('',#10171,#10172); +#10171 = CARTESIAN_POINT('',(1.25,-0.175,0.15)); +#10172 = VECTOR('',#10173,1.); +#10173 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#10174 = ORIENTED_EDGE('',*,*,#10175,.T.); +#10175 = EDGE_CURVE('',#10168,#10176,#10178,.T.); +#10176 = VERTEX_POINT('',#10177); +#10177 = CARTESIAN_POINT('',(1.112500297756,-0.175,0.207844627563)); +#10178 = CIRCLE('',#10179,7.E-02); +#10179 = AXIS2_PLACEMENT_3D('',#10180,#10181,#10182); +#10180 = CARTESIAN_POINT('',(1.181436840466,-0.175,0.22)); +#10181 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#10182 = DIRECTION('',(0.,0.,-1.)); +#10183 = ORIENTED_EDGE('',*,*,#10184,.T.); +#10184 = EDGE_CURVE('',#10176,#10185,#10187,.T.); +#10185 = VERTEX_POINT('',#10186); +#10186 = CARTESIAN_POINT('',(1.066657705663,-0.175,0.493202599087)); +#10187 = LINE('',#10188,#10189); +#10188 = CARTESIAN_POINT('',(1.112500297756,-0.175,0.207844627563)); +#10189 = VECTOR('',#10190,1.); +#10190 = DIRECTION('',(-0.158615661317,3.521975185208E-17,0.987340403298 + )); +#10191 = ORIENTED_EDGE('',*,*,#10192,.T.); +#10192 = EDGE_CURVE('',#10185,#9271,#10193,.T.); +#10193 = CIRCLE('',#10194,0.22); +#10194 = AXIS2_PLACEMENT_3D('',#10195,#10196,#10197); +#10195 = CARTESIAN_POINT('',(0.85,-0.175,0.455)); +#10196 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10197 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667 + )); +#10198 = PLANE('',#10199); +#10199 = AXIS2_PLACEMENT_3D('',#10200,#10201,#10202); +#10200 = CARTESIAN_POINT('',(1.021526355437,-0.175,0.332418056697)); +#10201 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10202 = DIRECTION('',(0.,0.,1.)); +#10203 = ADVANCED_FACE('',(#10204),#10215,.T.); +#10204 = FACE_BOUND('',#10205,.T.); +#10205 = EDGE_LOOP('',(#10206,#10207,#10208,#10209)); +#10206 = ORIENTED_EDGE('',*,*,#10100,.T.); +#10207 = ORIENTED_EDGE('',*,*,#9695,.T.); +#10208 = ORIENTED_EDGE('',*,*,#10192,.F.); +#10209 = ORIENTED_EDGE('',*,*,#10210,.F.); +#10210 = EDGE_CURVE('',#10093,#10185,#10211,.T.); +#10211 = LINE('',#10212,#10213); +#10212 = CARTESIAN_POINT('',(1.066657705663,0.175,0.493202599087)); +#10213 = VECTOR('',#10214,1.); +#10214 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10215 = CYLINDRICAL_SURFACE('',#10216,0.22); +#10216 = AXIS2_PLACEMENT_3D('',#10217,#10218,#10219); +#10217 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#10218 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#10219 = DIRECTION('',(0.984807753012,-2.186712484447E-16,0.173648177667 + )); +#10220 = ADVANCED_FACE('',(#10221,#10231),#10265,.T.); +#10221 = FACE_BOUND('',#10222,.T.); +#10222 = EDGE_LOOP('',(#10223,#10224,#10225,#10226,#10227,#10228,#10229, + #10230)); +#10223 = ORIENTED_EDGE('',*,*,#9831,.F.); +#10224 = ORIENTED_EDGE('',*,*,#9801,.F.); +#10225 = ORIENTED_EDGE('',*,*,#9778,.F.); +#10226 = ORIENTED_EDGE('',*,*,#9755,.F.); +#10227 = ORIENTED_EDGE('',*,*,#9726,.F.); +#10228 = ORIENTED_EDGE('',*,*,#10025,.F.); +#10229 = ORIENTED_EDGE('',*,*,#10008,.F.); +#10230 = ORIENTED_EDGE('',*,*,#9985,.F.); +#10231 = FACE_BOUND('',#10232,.T.); +#10232 = EDGE_LOOP('',(#10233,#10243,#10251,#10259)); +#10233 = ORIENTED_EDGE('',*,*,#10234,.T.); +#10234 = EDGE_CURVE('',#10235,#10237,#10239,.T.); +#10235 = VERTEX_POINT('',#10236); +#10236 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.1)); +#10237 = VERTEX_POINT('',#10238); +#10238 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.1)); +#10239 = LINE('',#10240,#10241); +#10240 = CARTESIAN_POINT('',(-0.740270145251,-0.490270145251,1.1)); +#10241 = VECTOR('',#10242,1.); +#10242 = DIRECTION('',(-1.,0.,0.)); +#10243 = ORIENTED_EDGE('',*,*,#10244,.T.); +#10244 = EDGE_CURVE('',#10237,#10245,#10247,.T.); +#10245 = VERTEX_POINT('',#10246); +#10246 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.1)); +#10247 = LINE('',#10248,#10249); +#10248 = CARTESIAN_POINT('',(-0.715270145251,-0.488952608939,1.1)); +#10249 = VECTOR('',#10250,1.); +#10250 = DIRECTION('',(0.,1.,0.)); +#10251 = ORIENTED_EDGE('',*,*,#10252,.F.); +#10252 = EDGE_CURVE('',#10253,#10245,#10255,.T.); +#10253 = VERTEX_POINT('',#10254); +#10254 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.1)); +#10255 = LINE('',#10256,#10257); +#10256 = CARTESIAN_POINT('',(-0.740270145251,0.490270145251,1.1)); +#10257 = VECTOR('',#10258,1.); +#10258 = DIRECTION('',(-1.,0.,0.)); +#10259 = ORIENTED_EDGE('',*,*,#10260,.F.); +#10260 = EDGE_CURVE('',#10235,#10253,#10261,.T.); +#10261 = LINE('',#10262,#10263); +#10262 = CARTESIAN_POINT('',(-0.315270145251,-0.488952608939,1.1)); +#10263 = VECTOR('',#10264,1.); +#10264 = DIRECTION('',(0.,1.,0.)); +#10265 = PLANE('',#10266); +#10266 = AXIS2_PLACEMENT_3D('',#10267,#10268,#10269); +#10267 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#10268 = DIRECTION('',(0.,0.,1.)); +#10269 = DIRECTION('',(0.84333939541,0.537381302382,-0.)); +#10270 = ADVANCED_FACE('',(#10271),#10282,.F.); +#10271 = FACE_BOUND('',#10272,.F.); +#10272 = EDGE_LOOP('',(#10273,#10279,#10280,#10281)); +#10273 = ORIENTED_EDGE('',*,*,#10274,.T.); +#10274 = EDGE_CURVE('',#10084,#10176,#10275,.T.); +#10275 = LINE('',#10276,#10277); +#10276 = CARTESIAN_POINT('',(1.112500297756,0.175,0.207844627563)); +#10277 = VECTOR('',#10278,1.); +#10278 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10279 = ORIENTED_EDGE('',*,*,#10184,.T.); +#10280 = ORIENTED_EDGE('',*,*,#10210,.F.); +#10281 = ORIENTED_EDGE('',*,*,#10092,.F.); +#10282 = PLANE('',#10283); +#10283 = AXIS2_PLACEMENT_3D('',#10284,#10285,#10286); +#10284 = CARTESIAN_POINT('',(1.112500297756,0.175,0.207844627563)); +#10285 = DIRECTION('',(-0.987340403298,2.192336097769E-16, + -0.158615661317)); +#10286 = DIRECTION('',(-0.158615661317,3.521975185208E-17,0.987340403298 + )); +#10287 = ADVANCED_FACE('',(#10288),#10299,.F.); +#10288 = FACE_BOUND('',#10289,.F.); +#10289 = EDGE_LOOP('',(#10290,#10296,#10297,#10298)); +#10290 = ORIENTED_EDGE('',*,*,#10291,.T.); +#10291 = EDGE_CURVE('',#10076,#10168,#10292,.T.); +#10292 = LINE('',#10293,#10294); +#10293 = CARTESIAN_POINT('',(1.181436840466,0.175,0.15)); +#10294 = VECTOR('',#10295,1.); +#10295 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10296 = ORIENTED_EDGE('',*,*,#10175,.T.); +#10297 = ORIENTED_EDGE('',*,*,#10274,.F.); +#10298 = ORIENTED_EDGE('',*,*,#10083,.F.); +#10299 = CYLINDRICAL_SURFACE('',#10300,7.E-02); +#10300 = AXIS2_PLACEMENT_3D('',#10301,#10302,#10303); +#10301 = CARTESIAN_POINT('',(1.181436840466,0.175,0.22)); +#10302 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#10303 = DIRECTION('',(0.,0.,-1.)); +#10304 = ADVANCED_FACE('',(#10305),#10316,.F.); +#10305 = FACE_BOUND('',#10306,.F.); +#10306 = EDGE_LOOP('',(#10307,#10313,#10314,#10315)); +#10307 = ORIENTED_EDGE('',*,*,#10308,.T.); +#10308 = EDGE_CURVE('',#10068,#10160,#10309,.T.); +#10309 = LINE('',#10310,#10311); +#10310 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#10311 = VECTOR('',#10312,1.); +#10312 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10313 = ORIENTED_EDGE('',*,*,#10167,.T.); +#10314 = ORIENTED_EDGE('',*,*,#10291,.F.); +#10315 = ORIENTED_EDGE('',*,*,#10075,.F.); +#10316 = PLANE('',#10317); +#10317 = AXIS2_PLACEMENT_3D('',#10318,#10319,#10320); +#10318 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#10319 = DIRECTION('',(0.,0.,-1.)); +#10320 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#10321 = ADVANCED_FACE('',(#10322),#10333,.F.); +#10322 = FACE_BOUND('',#10323,.F.); +#10323 = EDGE_LOOP('',(#10324,#10330,#10331,#10332)); +#10324 = ORIENTED_EDGE('',*,*,#10325,.T.); +#10325 = EDGE_CURVE('',#10060,#10152,#10326,.T.); +#10326 = LINE('',#10327,#10328); +#10327 = CARTESIAN_POINT('',(1.25,0.175,-5.551115123126E-17)); +#10328 = VECTOR('',#10329,1.); +#10329 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10330 = ORIENTED_EDGE('',*,*,#10159,.T.); +#10331 = ORIENTED_EDGE('',*,*,#10308,.F.); +#10332 = ORIENTED_EDGE('',*,*,#10067,.F.); +#10333 = PLANE('',#10334); +#10334 = AXIS2_PLACEMENT_3D('',#10335,#10336,#10337); +#10335 = CARTESIAN_POINT('',(1.25,0.175,-5.551115123126E-17)); +#10336 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#10337 = DIRECTION('',(0.,0.,1.)); +#10338 = ADVANCED_FACE('',(#10339),#10350,.F.); +#10339 = FACE_BOUND('',#10340,.F.); +#10340 = EDGE_LOOP('',(#10341,#10347,#10348,#10349)); +#10341 = ORIENTED_EDGE('',*,*,#10342,.T.); +#10342 = EDGE_CURVE('',#10051,#10143,#10343,.T.); +#10343 = LINE('',#10344,#10345); +#10344 = CARTESIAN_POINT('',(1.181436840466,0.175,-5.551115123126E-17)); +#10345 = VECTOR('',#10346,1.); +#10346 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#10347 = ORIENTED_EDGE('',*,*,#10151,.T.); +#10348 = ORIENTED_EDGE('',*,*,#10325,.F.); +#10349 = ORIENTED_EDGE('',*,*,#10059,.F.); +#10350 = PLANE('',#10351); +#10351 = AXIS2_PLACEMENT_3D('',#10352,#10353,#10354); +#10352 = CARTESIAN_POINT('',(1.181436840466,0.175,-5.551115123126E-17)); +#10353 = DIRECTION('',(0.,0.,1.)); +#10354 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#10355 = ADVANCED_FACE('',(#10356),#10362,.T.); +#10356 = FACE_BOUND('',#10357,.T.); +#10357 = EDGE_LOOP('',(#10358,#10359,#10360,#10361)); +#10358 = ORIENTED_EDGE('',*,*,#10050,.T.); +#10359 = ORIENTED_EDGE('',*,*,#10342,.T.); +#10360 = ORIENTED_EDGE('',*,*,#10142,.F.); +#10361 = ORIENTED_EDGE('',*,*,#10124,.F.); +#10362 = CYLINDRICAL_SURFACE('',#10363,0.22); +#10363 = AXIS2_PLACEMENT_3D('',#10364,#10365,#10366); +#10364 = CARTESIAN_POINT('',(1.181436840466,0.175,0.22)); +#10365 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#10366 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#10367 = ADVANCED_FACE('',(#10368),#10393,.F.); +#10368 = FACE_BOUND('',#10369,.F.); +#10369 = EDGE_LOOP('',(#10370,#10371,#10379,#10387)); +#10370 = ORIENTED_EDGE('',*,*,#10234,.T.); +#10371 = ORIENTED_EDGE('',*,*,#10372,.T.); +#10372 = EDGE_CURVE('',#10237,#10373,#10375,.T.); +#10373 = VERTEX_POINT('',#10374); +#10374 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.11)); +#10375 = LINE('',#10376,#10377); +#10376 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#10377 = VECTOR('',#10378,1.); +#10378 = DIRECTION('',(0.,0.,1.)); +#10379 = ORIENTED_EDGE('',*,*,#10380,.T.); +#10380 = EDGE_CURVE('',#10373,#10381,#10383,.T.); +#10381 = VERTEX_POINT('',#10382); +#10382 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.11)); +#10383 = LINE('',#10384,#10385); +#10384 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.11)); +#10385 = VECTOR('',#10386,1.); +#10386 = DIRECTION('',(1.,0.,0.)); +#10387 = ORIENTED_EDGE('',*,*,#10388,.F.); +#10388 = EDGE_CURVE('',#10235,#10381,#10389,.T.); +#10389 = LINE('',#10390,#10391); +#10390 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.09)); +#10391 = VECTOR('',#10392,1.); +#10392 = DIRECTION('',(0.,0.,1.)); +#10393 = PLANE('',#10394); +#10394 = AXIS2_PLACEMENT_3D('',#10395,#10396,#10397); +#10395 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#10396 = DIRECTION('',(0.,1.,0.)); +#10397 = DIRECTION('',(0.,-0.,1.)); +#10398 = ADVANCED_FACE('',(#10399),#10417,.T.); +#10399 = FACE_BOUND('',#10400,.T.); +#10400 = EDGE_LOOP('',(#10401,#10402,#10403,#10411)); +#10401 = ORIENTED_EDGE('',*,*,#10388,.F.); +#10402 = ORIENTED_EDGE('',*,*,#10260,.T.); +#10403 = ORIENTED_EDGE('',*,*,#10404,.T.); +#10404 = EDGE_CURVE('',#10253,#10405,#10407,.T.); +#10405 = VERTEX_POINT('',#10406); +#10406 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.11)); +#10407 = LINE('',#10408,#10409); +#10408 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.09)); +#10409 = VECTOR('',#10410,1.); +#10410 = DIRECTION('',(0.,0.,1.)); +#10411 = ORIENTED_EDGE('',*,*,#10412,.F.); +#10412 = EDGE_CURVE('',#10381,#10405,#10413,.T.); +#10413 = LINE('',#10414,#10415); +#10414 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.11)); +#10415 = VECTOR('',#10416,1.); +#10416 = DIRECTION('',(0.,1.,0.)); +#10417 = PLANE('',#10418); +#10418 = AXIS2_PLACEMENT_3D('',#10419,#10420,#10421); +#10419 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.09)); +#10420 = DIRECTION('',(1.,0.,0.)); +#10421 = DIRECTION('',(0.,0.,1.)); +#10422 = ADVANCED_FACE('',(#10423),#10441,.T.); +#10423 = FACE_BOUND('',#10424,.T.); +#10424 = EDGE_LOOP('',(#10425,#10426,#10434,#10440)); +#10425 = ORIENTED_EDGE('',*,*,#10252,.T.); +#10426 = ORIENTED_EDGE('',*,*,#10427,.T.); +#10427 = EDGE_CURVE('',#10245,#10428,#10430,.T.); +#10428 = VERTEX_POINT('',#10429); +#10429 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.11)); +#10430 = LINE('',#10431,#10432); +#10431 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.09)); +#10432 = VECTOR('',#10433,1.); +#10433 = DIRECTION('',(0.,0.,1.)); +#10434 = ORIENTED_EDGE('',*,*,#10435,.T.); +#10435 = EDGE_CURVE('',#10428,#10405,#10436,.T.); +#10436 = LINE('',#10437,#10438); +#10437 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.11)); +#10438 = VECTOR('',#10439,1.); +#10439 = DIRECTION('',(1.,0.,0.)); +#10440 = ORIENTED_EDGE('',*,*,#10404,.F.); +#10441 = PLANE('',#10442); +#10442 = AXIS2_PLACEMENT_3D('',#10443,#10444,#10445); +#10443 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.09)); +#10444 = DIRECTION('',(0.,1.,0.)); +#10445 = DIRECTION('',(0.,-0.,1.)); +#10446 = ADVANCED_FACE('',(#10447),#10458,.F.); +#10447 = FACE_BOUND('',#10448,.F.); +#10448 = EDGE_LOOP('',(#10449,#10450,#10451,#10452)); +#10449 = ORIENTED_EDGE('',*,*,#10372,.F.); +#10450 = ORIENTED_EDGE('',*,*,#10244,.T.); +#10451 = ORIENTED_EDGE('',*,*,#10427,.T.); +#10452 = ORIENTED_EDGE('',*,*,#10453,.F.); +#10453 = EDGE_CURVE('',#10373,#10428,#10454,.T.); +#10454 = LINE('',#10455,#10456); +#10455 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.11)); +#10456 = VECTOR('',#10457,1.); +#10457 = DIRECTION('',(0.,1.,0.)); +#10458 = PLANE('',#10459); +#10459 = AXIS2_PLACEMENT_3D('',#10460,#10461,#10462); +#10460 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#10461 = DIRECTION('',(1.,0.,0.)); +#10462 = DIRECTION('',(0.,0.,1.)); +#10463 = ADVANCED_FACE('',(#10464),#10470,.T.); +#10464 = FACE_BOUND('',#10465,.T.); +#10465 = EDGE_LOOP('',(#10466,#10467,#10468,#10469)); +#10466 = ORIENTED_EDGE('',*,*,#10453,.F.); +#10467 = ORIENTED_EDGE('',*,*,#10380,.T.); +#10468 = ORIENTED_EDGE('',*,*,#10412,.T.); +#10469 = ORIENTED_EDGE('',*,*,#10435,.F.); +#10470 = PLANE('',#10471); +#10471 = AXIS2_PLACEMENT_3D('',#10472,#10473,#10474); +#10472 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.11)); +#10473 = DIRECTION('',(0.,0.,1.)); +#10474 = DIRECTION('',(1.,0.,-0.)); +#10475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#10479)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#10476,#10477,#10478)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#10476 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#10477 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#10478 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#10479 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#10476, + 'distance_accuracy_value','confusion accuracy'); +#10480 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10481,#10483); +#10481 = ( REPRESENTATION_RELATIONSHIP('','',#8786,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10482) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#10482 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95); +#10483 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #10484); +#10484 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('21','D6','',#5,#8781,$); +#10485 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8783)); +#10486 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#10487,#10489); +#10487 = ( REPRESENTATION_RELATIONSHIP('','',#8786,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#10488) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#10488 = ITEM_DEFINED_TRANSFORMATION('','',#11,#99); +#10489 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #10490); +#10490 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('22','D7','',#5,#8781,$); +#10491 = SHAPE_DEFINITION_REPRESENTATION(#10492,#10498); +#10492 = PRODUCT_DEFINITION_SHAPE('','',#10493); +#10493 = PRODUCT_DEFINITION('design','',#10494,#10497); +#10494 = PRODUCT_DEFINITION_FORMATION('','',#10495); +#10495 = PRODUCT('BarrelJack_CUI_PJ-063AH_Horizontal', + 'BarrelJack_CUI_PJ-063AH_Horizontal','',(#10496)); +#10496 = PRODUCT_CONTEXT('',#2,'mechanical'); +#10497 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10498 = SHAPE_REPRESENTATION('',(#11,#10499,#12017),#13184); +#10499 = MANIFOLD_SOLID_BREP('',#10500); +#10500 = CLOSED_SHELL('',(#10501,#10541,#10572,#10603,#10620,#10637, + #10668,#10699,#10826,#10857,#10881,#10912,#10936,#10960,#10991, + #11015,#11046,#11070,#11094,#11118,#11142,#11159,#11183,#11207, + #11231,#11255,#11279,#11303,#11320,#11337,#11354,#11376,#11393, + #11424,#11448,#11479,#11606,#11623,#11640,#11664,#11688,#11719, + #11743,#11767,#11791,#11815,#11832,#11856,#11880,#11904,#11928, + #11952,#11976,#11993)); +#10501 = ADVANCED_FACE('',(#10502),#10536,.T.); +#10502 = FACE_BOUND('',#10503,.T.); +#10503 = EDGE_LOOP('',(#10504,#10514,#10522,#10530)); +#10504 = ORIENTED_EDGE('',*,*,#10505,.T.); +#10505 = EDGE_CURVE('',#10506,#10508,#10510,.T.); +#10506 = VERTEX_POINT('',#10507); +#10507 = CARTESIAN_POINT('',(-4.9,-10.8,8.6)); +#10508 = VERTEX_POINT('',#10509); +#10509 = CARTESIAN_POINT('',(-4.9,-10.8,8.9)); +#10510 = LINE('',#10511,#10512); +#10511 = CARTESIAN_POINT('',(-4.9,-10.8,8.6)); +#10512 = VECTOR('',#10513,1.); +#10513 = DIRECTION('',(0.,0.,1.)); +#10514 = ORIENTED_EDGE('',*,*,#10515,.T.); +#10515 = EDGE_CURVE('',#10508,#10516,#10518,.T.); +#10516 = VERTEX_POINT('',#10517); +#10517 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#10518 = LINE('',#10519,#10520); +#10519 = CARTESIAN_POINT('',(-4.9,-10.8,8.9)); +#10520 = VECTOR('',#10521,1.); +#10521 = DIRECTION('',(0.,1.,0.)); +#10522 = ORIENTED_EDGE('',*,*,#10523,.F.); +#10523 = EDGE_CURVE('',#10524,#10516,#10526,.T.); +#10524 = VERTEX_POINT('',#10525); +#10525 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#10526 = LINE('',#10527,#10528); +#10527 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#10528 = VECTOR('',#10529,1.); +#10529 = DIRECTION('',(0.,0.,1.)); +#10530 = ORIENTED_EDGE('',*,*,#10531,.F.); +#10531 = EDGE_CURVE('',#10506,#10524,#10532,.T.); +#10532 = LINE('',#10533,#10534); +#10533 = CARTESIAN_POINT('',(-4.9,-10.8,8.6)); +#10534 = VECTOR('',#10535,1.); +#10535 = DIRECTION('',(0.,1.,0.)); +#10536 = PLANE('',#10537); +#10537 = AXIS2_PLACEMENT_3D('',#10538,#10539,#10540); +#10538 = CARTESIAN_POINT('',(-4.9,-10.8,8.6)); +#10539 = DIRECTION('',(-1.,0.,0.)); +#10540 = DIRECTION('',(0.,1.,0.)); +#10541 = ADVANCED_FACE('',(#10542),#10567,.T.); +#10542 = FACE_BOUND('',#10543,.T.); +#10543 = EDGE_LOOP('',(#10544,#10552,#10560,#10566)); +#10544 = ORIENTED_EDGE('',*,*,#10545,.F.); +#10545 = EDGE_CURVE('',#10546,#10506,#10548,.T.); +#10546 = VERTEX_POINT('',#10547); +#10547 = CARTESIAN_POINT('',(-4.899997830396,-10.8,8.6)); +#10548 = LINE('',#10549,#10550); +#10549 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#10550 = VECTOR('',#10551,1.); +#10551 = DIRECTION('',(-1.,0.,0.)); +#10552 = ORIENTED_EDGE('',*,*,#10553,.T.); +#10553 = EDGE_CURVE('',#10546,#10554,#10556,.T.); +#10554 = VERTEX_POINT('',#10555); +#10555 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.9)); +#10556 = LINE('',#10557,#10558); +#10557 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#10558 = VECTOR('',#10559,1.); +#10559 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10560 = ORIENTED_EDGE('',*,*,#10561,.T.); +#10561 = EDGE_CURVE('',#10554,#10508,#10562,.T.); +#10562 = LINE('',#10563,#10564); +#10563 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#10564 = VECTOR('',#10565,1.); +#10565 = DIRECTION('',(-1.,0.,0.)); +#10566 = ORIENTED_EDGE('',*,*,#10505,.F.); +#10567 = PLANE('',#10568); +#10568 = AXIS2_PLACEMENT_3D('',#10569,#10570,#10571); +#10569 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#10570 = DIRECTION('',(0.,-1.,0.)); +#10571 = DIRECTION('',(-1.,0.,0.)); +#10572 = ADVANCED_FACE('',(#10573),#10598,.T.); +#10573 = FACE_BOUND('',#10574,.T.); +#10574 = EDGE_LOOP('',(#10575,#10583,#10584,#10592)); +#10575 = ORIENTED_EDGE('',*,*,#10576,.F.); +#10576 = EDGE_CURVE('',#10524,#10577,#10579,.T.); +#10577 = VERTEX_POINT('',#10578); +#10578 = CARTESIAN_POINT('',(-4.899997830396,-2.2,8.6)); +#10579 = LINE('',#10580,#10581); +#10580 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#10581 = VECTOR('',#10582,1.); +#10582 = DIRECTION('',(1.,0.,0.)); +#10583 = ORIENTED_EDGE('',*,*,#10523,.T.); +#10584 = ORIENTED_EDGE('',*,*,#10585,.T.); +#10585 = EDGE_CURVE('',#10516,#10586,#10588,.T.); +#10586 = VERTEX_POINT('',#10587); +#10587 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.9)); +#10588 = LINE('',#10589,#10590); +#10589 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#10590 = VECTOR('',#10591,1.); +#10591 = DIRECTION('',(1.,0.,0.)); +#10592 = ORIENTED_EDGE('',*,*,#10593,.T.); +#10593 = EDGE_CURVE('',#10586,#10577,#10594,.T.); +#10594 = LINE('',#10595,#10596); +#10595 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#10596 = VECTOR('',#10597,1.); +#10597 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#10598 = PLANE('',#10599); +#10599 = AXIS2_PLACEMENT_3D('',#10600,#10601,#10602); +#10600 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#10601 = DIRECTION('',(0.,1.,0.)); +#10602 = DIRECTION('',(1.,0.,0.)); +#10603 = ADVANCED_FACE('',(#10604),#10615,.F.); +#10604 = FACE_BOUND('',#10605,.F.); +#10605 = EDGE_LOOP('',(#10606,#10607,#10608,#10609)); +#10606 = ORIENTED_EDGE('',*,*,#10576,.F.); +#10607 = ORIENTED_EDGE('',*,*,#10531,.F.); +#10608 = ORIENTED_EDGE('',*,*,#10545,.F.); +#10609 = ORIENTED_EDGE('',*,*,#10610,.T.); +#10610 = EDGE_CURVE('',#10546,#10577,#10611,.T.); +#10611 = LINE('',#10612,#10613); +#10612 = CARTESIAN_POINT('',(-4.899997830396,-5.1,8.6)); +#10613 = VECTOR('',#10614,1.); +#10614 = DIRECTION('',(2.646971722006E-23,1.,0.)); +#10615 = PLANE('',#10616); +#10616 = AXIS2_PLACEMENT_3D('',#10617,#10618,#10619); +#10617 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#10618 = DIRECTION('',(0.,0.,1.)); +#10619 = DIRECTION('',(1.,0.,-0.)); +#10620 = ADVANCED_FACE('',(#10621),#10632,.T.); +#10621 = FACE_BOUND('',#10622,.T.); +#10622 = EDGE_LOOP('',(#10623,#10629,#10630,#10631)); +#10623 = ORIENTED_EDGE('',*,*,#10624,.T.); +#10624 = EDGE_CURVE('',#10554,#10586,#10625,.T.); +#10625 = LINE('',#10626,#10627); +#10626 = CARTESIAN_POINT('',(-4.899997758871,-5.1,8.9)); +#10627 = VECTOR('',#10628,1.); +#10628 = DIRECTION('',(2.646971722006E-23,1.,0.)); +#10629 = ORIENTED_EDGE('',*,*,#10585,.F.); +#10630 = ORIENTED_EDGE('',*,*,#10515,.F.); +#10631 = ORIENTED_EDGE('',*,*,#10561,.F.); +#10632 = PLANE('',#10633); +#10633 = AXIS2_PLACEMENT_3D('',#10634,#10635,#10636); +#10634 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#10635 = DIRECTION('',(0.,0.,1.)); +#10636 = DIRECTION('',(1.,0.,-0.)); +#10637 = ADVANCED_FACE('',(#10638),#10663,.F.); +#10638 = FACE_BOUND('',#10639,.T.); +#10639 = EDGE_LOOP('',(#10640,#10641,#10649,#10657)); +#10640 = ORIENTED_EDGE('',*,*,#10553,.F.); +#10641 = ORIENTED_EDGE('',*,*,#10642,.F.); +#10642 = EDGE_CURVE('',#10643,#10546,#10645,.T.); +#10643 = VERTEX_POINT('',#10644); +#10644 = CARTESIAN_POINT('',(-4.599997830396,-10.8,8.6)); +#10645 = LINE('',#10646,#10647); +#10646 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#10647 = VECTOR('',#10648,1.); +#10648 = DIRECTION('',(-1.,0.,0.)); +#10649 = ORIENTED_EDGE('',*,*,#10650,.T.); +#10650 = EDGE_CURVE('',#10643,#10651,#10653,.T.); +#10651 = VERTEX_POINT('',#10652); +#10652 = CARTESIAN_POINT('',(-4.599997758871,-10.8,8.9)); +#10653 = LINE('',#10654,#10655); +#10654 = CARTESIAN_POINT('',(-4.599999880791,-10.8,1.096722851146E-06)); +#10655 = VECTOR('',#10656,1.); +#10656 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10657 = ORIENTED_EDGE('',*,*,#10658,.T.); +#10658 = EDGE_CURVE('',#10651,#10554,#10659,.T.); +#10659 = LINE('',#10660,#10661); +#10660 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#10661 = VECTOR('',#10662,1.); +#10662 = DIRECTION('',(-1.,0.,0.)); +#10663 = PLANE('',#10664); +#10664 = AXIS2_PLACEMENT_3D('',#10665,#10666,#10667); +#10665 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#10666 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#10667 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#10668 = ADVANCED_FACE('',(#10669),#10694,.F.); +#10669 = FACE_BOUND('',#10670,.T.); +#10670 = EDGE_LOOP('',(#10671,#10672,#10680,#10688)); +#10671 = ORIENTED_EDGE('',*,*,#10593,.F.); +#10672 = ORIENTED_EDGE('',*,*,#10673,.T.); +#10673 = EDGE_CURVE('',#10586,#10674,#10676,.T.); +#10674 = VERTEX_POINT('',#10675); +#10675 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.9)); +#10676 = LINE('',#10677,#10678); +#10677 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#10678 = VECTOR('',#10679,1.); +#10679 = DIRECTION('',(1.,0.,0.)); +#10680 = ORIENTED_EDGE('',*,*,#10681,.T.); +#10681 = EDGE_CURVE('',#10674,#10682,#10684,.T.); +#10682 = VERTEX_POINT('',#10683); +#10683 = CARTESIAN_POINT('',(-4.599997830396,-2.2,8.6)); +#10684 = LINE('',#10685,#10686); +#10685 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.900001096723)); +#10686 = VECTOR('',#10687,1.); +#10687 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#10688 = ORIENTED_EDGE('',*,*,#10689,.F.); +#10689 = EDGE_CURVE('',#10577,#10682,#10690,.T.); +#10690 = LINE('',#10691,#10692); +#10691 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#10692 = VECTOR('',#10693,1.); +#10693 = DIRECTION('',(1.,0.,0.)); +#10694 = PLANE('',#10695); +#10695 = AXIS2_PLACEMENT_3D('',#10696,#10697,#10698); +#10696 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#10697 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#10698 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#10699 = ADVANCED_FACE('',(#10700),#10821,.F.); +#10700 = FACE_BOUND('',#10701,.T.); +#10701 = EDGE_LOOP('',(#10702,#10712,#10720,#10728,#10736,#10744,#10752, + #10760,#10768,#10774,#10775,#10783,#10791,#10799,#10807,#10815)); +#10702 = ORIENTED_EDGE('',*,*,#10703,.F.); +#10703 = EDGE_CURVE('',#10704,#10706,#10708,.T.); +#10704 = VERTEX_POINT('',#10705); +#10705 = CARTESIAN_POINT('',(-4.900000596045,-6.5,-2.999998831752)); +#10706 = VERTEX_POINT('',#10707); +#10707 = CARTESIAN_POINT('',(-4.900000476836,-6.,-2.499998831752)); +#10708 = LINE('',#10709,#10710); +#10709 = CARTESIAN_POINT('',(-4.900000655649,-6.75,-3.249998831752)); +#10710 = VECTOR('',#10711,1.); +#10711 = DIRECTION('',(1.68586994684E-07,0.707106781187,0.707106781187) + ); +#10712 = ORIENTED_EDGE('',*,*,#10713,.F.); +#10713 = EDGE_CURVE('',#10714,#10704,#10716,.T.); +#10714 = VERTEX_POINT('',#10715); +#10715 = CARTESIAN_POINT('',(-4.900000596045,-7.5,-2.999998831752)); +#10716 = LINE('',#10717,#10718); +#10717 = CARTESIAN_POINT('',(-4.900000596045,-8.,-2.999998831752)); +#10718 = VECTOR('',#10719,1.); +#10719 = DIRECTION('',(3.488244315274E-30,1.,2.646971654213E-23)); +#10720 = ORIENTED_EDGE('',*,*,#10721,.T.); +#10721 = EDGE_CURVE('',#10714,#10722,#10724,.T.); +#10722 = VERTEX_POINT('',#10723); +#10723 = CARTESIAN_POINT('',(-4.900000476836,-8.,-2.499998831752)); +#10724 = LINE('',#10725,#10726); +#10725 = CARTESIAN_POINT('',(-4.90000053644,-7.75,-2.749998831752)); +#10726 = VECTOR('',#10727,1.); +#10727 = DIRECTION('',(1.68586994684E-07,-0.707106781187,0.707106781187) + ); +#10728 = ORIENTED_EDGE('',*,*,#10729,.F.); +#10729 = EDGE_CURVE('',#10730,#10722,#10732,.T.); +#10730 = VERTEX_POINT('',#10731); +#10731 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255468E-06)); +#10732 = LINE('',#10733,#10734); +#10733 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#10734 = VECTOR('',#10735,1.); +#10735 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#10736 = ORIENTED_EDGE('',*,*,#10737,.T.); +#10737 = EDGE_CURVE('',#10730,#10738,#10740,.T.); +#10738 = VERTEX_POINT('',#10739); +#10739 = CARTESIAN_POINT('',(-4.899999165537,-8.,3.000001168248)); +#10740 = LINE('',#10741,#10742); +#10741 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#10742 = VECTOR('',#10743,1.); +#10743 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10744 = ORIENTED_EDGE('',*,*,#10745,.T.); +#10745 = EDGE_CURVE('',#10738,#10746,#10748,.T.); +#10746 = VERTEX_POINT('',#10747); +#10747 = CARTESIAN_POINT('',(-4.899999165537,-8.3,3.000001168248)); +#10748 = LINE('',#10749,#10750); +#10749 = CARTESIAN_POINT('',(-4.899999165537,-8.,3.000001168248)); +#10750 = VECTOR('',#10751,1.); +#10751 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#10752 = ORIENTED_EDGE('',*,*,#10753,.T.); +#10753 = EDGE_CURVE('',#10746,#10754,#10756,.T.); +#10754 = VERTEX_POINT('',#10755); +#10755 = CARTESIAN_POINT('',(-4.899999880791,-8.3,1.168248255468E-06)); +#10756 = LINE('',#10757,#10758); +#10757 = CARTESIAN_POINT('',(-4.899999165537,-8.3,3.000001168248)); +#10758 = VECTOR('',#10759,1.); +#10759 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#10760 = ORIENTED_EDGE('',*,*,#10761,.T.); +#10761 = EDGE_CURVE('',#10754,#10762,#10764,.T.); +#10762 = VERTEX_POINT('',#10763); +#10763 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255468E-06)); +#10764 = LINE('',#10765,#10766); +#10765 = CARTESIAN_POINT('',(-4.899999880791,-8.3,1.168248255423E-06)); +#10766 = VECTOR('',#10767,1.); +#10767 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#10768 = ORIENTED_EDGE('',*,*,#10769,.T.); +#10769 = EDGE_CURVE('',#10762,#10546,#10770,.T.); +#10770 = LINE('',#10771,#10772); +#10771 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#10772 = VECTOR('',#10773,1.); +#10773 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10774 = ORIENTED_EDGE('',*,*,#10610,.T.); +#10775 = ORIENTED_EDGE('',*,*,#10776,.T.); +#10776 = EDGE_CURVE('',#10577,#10777,#10779,.T.); +#10777 = VERTEX_POINT('',#10778); +#10778 = CARTESIAN_POINT('',(-4.899999880791,-2.2,1.168248255468E-06)); +#10779 = LINE('',#10780,#10781); +#10780 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#10781 = VECTOR('',#10782,1.); +#10782 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#10783 = ORIENTED_EDGE('',*,*,#10784,.T.); +#10784 = EDGE_CURVE('',#10777,#10785,#10787,.T.); +#10785 = VERTEX_POINT('',#10786); +#10786 = CARTESIAN_POINT('',(-4.899999880791,-5.7,1.168248255468E-06)); +#10787 = LINE('',#10788,#10789); +#10788 = CARTESIAN_POINT('',(-4.899999880791,-2.2,1.168248255423E-06)); +#10789 = VECTOR('',#10790,1.); +#10790 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#10791 = ORIENTED_EDGE('',*,*,#10792,.T.); +#10792 = EDGE_CURVE('',#10785,#10793,#10795,.T.); +#10793 = VERTEX_POINT('',#10794); +#10794 = CARTESIAN_POINT('',(-4.899999165537,-5.7,3.000001168248)); +#10795 = LINE('',#10796,#10797); +#10796 = CARTESIAN_POINT('',(-4.899999880791,-5.7,1.168248255423E-06)); +#10797 = VECTOR('',#10798,1.); +#10798 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10799 = ORIENTED_EDGE('',*,*,#10800,.T.); +#10800 = EDGE_CURVE('',#10793,#10801,#10803,.T.); +#10801 = VERTEX_POINT('',#10802); +#10802 = CARTESIAN_POINT('',(-4.899999165537,-6.,3.000001168248)); +#10803 = LINE('',#10804,#10805); +#10804 = CARTESIAN_POINT('',(-4.899999165537,-5.7,3.000001168248)); +#10805 = VECTOR('',#10806,1.); +#10806 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#10807 = ORIENTED_EDGE('',*,*,#10808,.T.); +#10808 = EDGE_CURVE('',#10801,#10809,#10811,.T.); +#10809 = VERTEX_POINT('',#10810); +#10810 = CARTESIAN_POINT('',(-4.899999880791,-6.,1.168248255468E-06)); +#10811 = LINE('',#10812,#10813); +#10812 = CARTESIAN_POINT('',(-4.899999165537,-6.,3.000001168248)); +#10813 = VECTOR('',#10814,1.); +#10814 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#10815 = ORIENTED_EDGE('',*,*,#10816,.F.); +#10816 = EDGE_CURVE('',#10706,#10809,#10817,.T.); +#10817 = LINE('',#10818,#10819); +#10818 = CARTESIAN_POINT('',(-4.900000596045,-6.,-2.999998831752)); +#10819 = VECTOR('',#10820,1.); +#10820 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10821 = PLANE('',#10822); +#10822 = AXIS2_PLACEMENT_3D('',#10823,#10824,#10825); +#10823 = CARTESIAN_POINT('',(-4.900000596045,-8.,-2.999998831752)); +#10824 = DIRECTION('',(1.,-2.646971722006E-23,-2.384180143219E-07)); +#10825 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10826 = ADVANCED_FACE('',(#10827),#10852,.F.); +#10827 = FACE_BOUND('',#10828,.T.); +#10828 = EDGE_LOOP('',(#10829,#10837,#10838,#10846)); +#10829 = ORIENTED_EDGE('',*,*,#10830,.T.); +#10830 = EDGE_CURVE('',#10831,#10586,#10833,.T.); +#10831 = VERTEX_POINT('',#10832); +#10832 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#10833 = LINE('',#10834,#10835); +#10834 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#10835 = VECTOR('',#10836,1.); +#10836 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#10837 = ORIENTED_EDGE('',*,*,#10624,.F.); +#10838 = ORIENTED_EDGE('',*,*,#10839,.T.); +#10839 = EDGE_CURVE('',#10554,#10840,#10842,.T.); +#10840 = VERTEX_POINT('',#10841); +#10841 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.900001168248)); +#10842 = LINE('',#10843,#10844); +#10843 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#10844 = VECTOR('',#10845,1.); +#10845 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10846 = ORIENTED_EDGE('',*,*,#10847,.T.); +#10847 = EDGE_CURVE('',#10840,#10831,#10848,.T.); +#10848 = LINE('',#10849,#10850); +#10849 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.900001168248)); +#10850 = VECTOR('',#10851,1.); +#10851 = DIRECTION('',(3.488244315274E-30,1.,2.646971654213E-23)); +#10852 = PLANE('',#10853); +#10853 = AXIS2_PLACEMENT_3D('',#10854,#10855,#10856); +#10854 = CARTESIAN_POINT('',(-4.900000596045,-8.,-2.999998831752)); +#10855 = DIRECTION('',(1.,-2.646971722006E-23,-2.384180143219E-07)); +#10856 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10857 = ADVANCED_FACE('',(#10858),#10876,.F.); +#10858 = FACE_BOUND('',#10859,.T.); +#10859 = EDGE_LOOP('',(#10860,#10861,#10862,#10870)); +#10860 = ORIENTED_EDGE('',*,*,#10839,.F.); +#10861 = ORIENTED_EDGE('',*,*,#10658,.F.); +#10862 = ORIENTED_EDGE('',*,*,#10863,.T.); +#10863 = EDGE_CURVE('',#10651,#10864,#10866,.T.); +#10864 = VERTEX_POINT('',#10865); +#10865 = CARTESIAN_POINT('',(-4.599997758871,-10.8,8.900001096723)); +#10866 = LINE('',#10867,#10868); +#10867 = CARTESIAN_POINT('',(-4.599999880791,-10.8,1.096722851146E-06)); +#10868 = VECTOR('',#10869,1.); +#10869 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10870 = ORIENTED_EDGE('',*,*,#10871,.F.); +#10871 = EDGE_CURVE('',#10840,#10864,#10872,.T.); +#10872 = LINE('',#10873,#10874); +#10873 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.900001168248)); +#10874 = VECTOR('',#10875,1.); +#10875 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#10876 = PLANE('',#10877); +#10877 = AXIS2_PLACEMENT_3D('',#10878,#10879,#10880); +#10878 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#10879 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#10880 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#10881 = ADVANCED_FACE('',(#10882),#10907,.T.); +#10882 = FACE_BOUND('',#10883,.T.); +#10883 = EDGE_LOOP('',(#10884,#10892,#10900,#10906)); +#10884 = ORIENTED_EDGE('',*,*,#10885,.F.); +#10885 = EDGE_CURVE('',#10886,#10643,#10888,.T.); +#10886 = VERTEX_POINT('',#10887); +#10887 = CARTESIAN_POINT('',(4.6,-10.8,8.6)); +#10888 = LINE('',#10889,#10890); +#10889 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#10890 = VECTOR('',#10891,1.); +#10891 = DIRECTION('',(-1.,0.,0.)); +#10892 = ORIENTED_EDGE('',*,*,#10893,.T.); +#10893 = EDGE_CURVE('',#10886,#10894,#10896,.T.); +#10894 = VERTEX_POINT('',#10895); +#10895 = CARTESIAN_POINT('',(4.6,-10.8,8.9)); +#10896 = LINE('',#10897,#10898); +#10897 = CARTESIAN_POINT('',(4.6,-10.8,1.165734175856E-15)); +#10898 = VECTOR('',#10899,1.); +#10899 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#10900 = ORIENTED_EDGE('',*,*,#10901,.T.); +#10901 = EDGE_CURVE('',#10894,#10651,#10902,.T.); +#10902 = LINE('',#10903,#10904); +#10903 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#10904 = VECTOR('',#10905,1.); +#10905 = DIRECTION('',(-1.,0.,0.)); +#10906 = ORIENTED_EDGE('',*,*,#10650,.F.); +#10907 = PLANE('',#10908); +#10908 = AXIS2_PLACEMENT_3D('',#10909,#10910,#10911); +#10909 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#10910 = DIRECTION('',(0.,-1.,0.)); +#10911 = DIRECTION('',(-1.,0.,0.)); +#10912 = ADVANCED_FACE('',(#10913),#10931,.F.); +#10913 = FACE_BOUND('',#10914,.T.); +#10914 = EDGE_LOOP('',(#10915,#10916,#10924,#10930)); +#10915 = ORIENTED_EDGE('',*,*,#10769,.F.); +#10916 = ORIENTED_EDGE('',*,*,#10917,.T.); +#10917 = EDGE_CURVE('',#10762,#10918,#10920,.T.); +#10918 = VERTEX_POINT('',#10919); +#10919 = CARTESIAN_POINT('',(-4.599999880791,-10.8,1.096722851202E-06)); +#10920 = LINE('',#10921,#10922); +#10921 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#10922 = VECTOR('',#10923,1.); +#10923 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#10924 = ORIENTED_EDGE('',*,*,#10925,.T.); +#10925 = EDGE_CURVE('',#10918,#10643,#10926,.T.); +#10926 = LINE('',#10927,#10928); +#10927 = CARTESIAN_POINT('',(-4.599999880791,-10.8,1.096722851146E-06)); +#10928 = VECTOR('',#10929,1.); +#10929 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#10930 = ORIENTED_EDGE('',*,*,#10642,.T.); +#10931 = PLANE('',#10932); +#10932 = AXIS2_PLACEMENT_3D('',#10933,#10934,#10935); +#10933 = CARTESIAN_POINT('',(-4.899999880791,-10.8,1.168248255423E-06)); +#10934 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#10935 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#10936 = ADVANCED_FACE('',(#10937),#10955,.F.); +#10937 = FACE_BOUND('',#10938,.T.); +#10938 = EDGE_LOOP('',(#10939,#10940,#10941,#10949)); +#10939 = ORIENTED_EDGE('',*,*,#10776,.F.); +#10940 = ORIENTED_EDGE('',*,*,#10689,.T.); +#10941 = ORIENTED_EDGE('',*,*,#10942,.T.); +#10942 = EDGE_CURVE('',#10682,#10943,#10945,.T.); +#10943 = VERTEX_POINT('',#10944); +#10944 = CARTESIAN_POINT('',(-4.599999880791,-2.2,1.096722851202E-06)); +#10945 = LINE('',#10946,#10947); +#10946 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.900001096723)); +#10947 = VECTOR('',#10948,1.); +#10948 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#10949 = ORIENTED_EDGE('',*,*,#10950,.F.); +#10950 = EDGE_CURVE('',#10777,#10943,#10951,.T.); +#10951 = LINE('',#10952,#10953); +#10952 = CARTESIAN_POINT('',(-4.899999880791,-2.2,1.168248255423E-06)); +#10953 = VECTOR('',#10954,1.); +#10954 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#10955 = PLANE('',#10956); +#10956 = AXIS2_PLACEMENT_3D('',#10957,#10958,#10959); +#10957 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#10958 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#10959 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#10960 = ADVANCED_FACE('',(#10961),#10986,.T.); +#10961 = FACE_BOUND('',#10962,.T.); +#10962 = EDGE_LOOP('',(#10963,#10971,#10972,#10980)); +#10963 = ORIENTED_EDGE('',*,*,#10964,.F.); +#10964 = EDGE_CURVE('',#10682,#10965,#10967,.T.); +#10965 = VERTEX_POINT('',#10966); +#10966 = CARTESIAN_POINT('',(4.6,-2.2,8.6)); +#10967 = LINE('',#10968,#10969); +#10968 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#10969 = VECTOR('',#10970,1.); +#10970 = DIRECTION('',(1.,0.,0.)); +#10971 = ORIENTED_EDGE('',*,*,#10681,.F.); +#10972 = ORIENTED_EDGE('',*,*,#10973,.T.); +#10973 = EDGE_CURVE('',#10674,#10974,#10976,.T.); +#10974 = VERTEX_POINT('',#10975); +#10975 = CARTESIAN_POINT('',(4.6,-2.2,8.9)); +#10976 = LINE('',#10977,#10978); +#10977 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#10978 = VECTOR('',#10979,1.); +#10979 = DIRECTION('',(1.,0.,0.)); +#10980 = ORIENTED_EDGE('',*,*,#10981,.T.); +#10981 = EDGE_CURVE('',#10974,#10965,#10982,.T.); +#10982 = LINE('',#10983,#10984); +#10983 = CARTESIAN_POINT('',(4.6,-2.2,8.9)); +#10984 = VECTOR('',#10985,1.); +#10985 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#10986 = PLANE('',#10987); +#10987 = AXIS2_PLACEMENT_3D('',#10988,#10989,#10990); +#10988 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#10989 = DIRECTION('',(0.,1.,0.)); +#10990 = DIRECTION('',(1.,0.,0.)); +#10991 = ADVANCED_FACE('',(#10992),#11010,.F.); +#10992 = FACE_BOUND('',#10993,.T.); +#10993 = EDGE_LOOP('',(#10994,#10995,#11003,#11009)); +#10994 = ORIENTED_EDGE('',*,*,#10830,.F.); +#10995 = ORIENTED_EDGE('',*,*,#10996,.T.); +#10996 = EDGE_CURVE('',#10831,#10997,#10999,.T.); +#10997 = VERTEX_POINT('',#10998); +#10998 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.900001096723)); +#10999 = LINE('',#11000,#11001); +#11000 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#11001 = VECTOR('',#11002,1.); +#11002 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11003 = ORIENTED_EDGE('',*,*,#11004,.T.); +#11004 = EDGE_CURVE('',#10997,#10674,#11005,.T.); +#11005 = LINE('',#11006,#11007); +#11006 = CARTESIAN_POINT('',(-4.599997758871,-2.2,8.900001096723)); +#11007 = VECTOR('',#11008,1.); +#11008 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#11009 = ORIENTED_EDGE('',*,*,#10673,.F.); +#11010 = PLANE('',#11011); +#11011 = AXIS2_PLACEMENT_3D('',#11012,#11013,#11014); +#11012 = CARTESIAN_POINT('',(-4.899997758871,-2.2,8.900001168248)); +#11013 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#11014 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#11015 = ADVANCED_FACE('',(#11016),#11041,.T.); +#11016 = FACE_BOUND('',#11017,.F.); +#11017 = EDGE_LOOP('',(#11018,#11019,#11027,#11035)); +#11018 = ORIENTED_EDGE('',*,*,#10703,.F.); +#11019 = ORIENTED_EDGE('',*,*,#11020,.T.); +#11020 = EDGE_CURVE('',#10704,#11021,#11023,.T.); +#11021 = VERTEX_POINT('',#11022); +#11022 = CARTESIAN_POINT('',(-4.600000596045,-6.5,-2.999998903277)); +#11023 = LINE('',#11024,#11025); +#11024 = CARTESIAN_POINT('',(-4.900000596045,-6.5,-2.999998831752)); +#11025 = VECTOR('',#11026,1.); +#11026 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11027 = ORIENTED_EDGE('',*,*,#11028,.T.); +#11028 = EDGE_CURVE('',#11021,#11029,#11031,.T.); +#11029 = VERTEX_POINT('',#11030); +#11030 = CARTESIAN_POINT('',(-4.600000476836,-6.,-2.499998903277)); +#11031 = LINE('',#11032,#11033); +#11032 = CARTESIAN_POINT('',(-4.600000655649,-6.75,-3.249998903277)); +#11033 = VECTOR('',#11034,1.); +#11034 = DIRECTION('',(1.68586994684E-07,0.707106781187,0.707106781187) + ); +#11035 = ORIENTED_EDGE('',*,*,#11036,.F.); +#11036 = EDGE_CURVE('',#10706,#11029,#11037,.T.); +#11037 = LINE('',#11038,#11039); +#11038 = CARTESIAN_POINT('',(-4.900000476836,-6.,-2.499998831752)); +#11039 = VECTOR('',#11040,1.); +#11040 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11041 = PLANE('',#11042); +#11042 = AXIS2_PLACEMENT_3D('',#11043,#11044,#11045); +#11043 = CARTESIAN_POINT('',(-4.90000053644,-6.25,-2.749998831752)); +#11044 = DIRECTION('',(-1.685869947028E-07,0.707106781187, + -0.707106781187)); +#11045 = DIRECTION('',(-1.,-1.323085315946E-17,2.384180143352E-07)); +#11046 = ADVANCED_FACE('',(#11047),#11065,.T.); +#11047 = FACE_BOUND('',#11048,.F.); +#11048 = EDGE_LOOP('',(#11049,#11050,#11051,#11059)); +#11049 = ORIENTED_EDGE('',*,*,#10816,.F.); +#11050 = ORIENTED_EDGE('',*,*,#11036,.T.); +#11051 = ORIENTED_EDGE('',*,*,#11052,.T.); +#11052 = EDGE_CURVE('',#11029,#11053,#11055,.T.); +#11053 = VERTEX_POINT('',#11054); +#11054 = CARTESIAN_POINT('',(-4.599999880791,-6.,1.096722851202E-06)); +#11055 = LINE('',#11056,#11057); +#11056 = CARTESIAN_POINT('',(-4.600000596045,-6.,-2.999998903277)); +#11057 = VECTOR('',#11058,1.); +#11058 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#11059 = ORIENTED_EDGE('',*,*,#11060,.F.); +#11060 = EDGE_CURVE('',#10809,#11053,#11061,.T.); +#11061 = LINE('',#11062,#11063); +#11062 = CARTESIAN_POINT('',(-4.899999880791,-6.,1.168248255423E-06)); +#11063 = VECTOR('',#11064,1.); +#11064 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11065 = PLANE('',#11066); +#11066 = AXIS2_PLACEMENT_3D('',#11067,#11068,#11069); +#11067 = CARTESIAN_POINT('',(-4.900000596045,-6.,-2.999998831752)); +#11068 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#11069 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#11070 = ADVANCED_FACE('',(#11071),#11089,.F.); +#11071 = FACE_BOUND('',#11072,.T.); +#11072 = EDGE_LOOP('',(#11073,#11081,#11087,#11088)); +#11073 = ORIENTED_EDGE('',*,*,#11074,.T.); +#11074 = EDGE_CURVE('',#10801,#11075,#11077,.T.); +#11075 = VERTEX_POINT('',#11076); +#11076 = CARTESIAN_POINT('',(-4.599999165537,-6.,3.000001096723)); +#11077 = LINE('',#11078,#11079); +#11078 = CARTESIAN_POINT('',(-4.899999165537,-6.,3.000001168248)); +#11079 = VECTOR('',#11080,1.); +#11080 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11081 = ORIENTED_EDGE('',*,*,#11082,.T.); +#11082 = EDGE_CURVE('',#11075,#11053,#11083,.T.); +#11083 = LINE('',#11084,#11085); +#11084 = CARTESIAN_POINT('',(-4.599999165537,-6.,3.000001096723)); +#11085 = VECTOR('',#11086,1.); +#11086 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#11087 = ORIENTED_EDGE('',*,*,#11060,.F.); +#11088 = ORIENTED_EDGE('',*,*,#10808,.F.); +#11089 = PLANE('',#11090); +#11090 = AXIS2_PLACEMENT_3D('',#11091,#11092,#11093); +#11091 = CARTESIAN_POINT('',(-4.899999165537,-6.,3.000001168248)); +#11092 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#11093 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#11094 = ADVANCED_FACE('',(#11095),#11113,.F.); +#11095 = FACE_BOUND('',#11096,.T.); +#11096 = EDGE_LOOP('',(#11097,#11105,#11111,#11112)); +#11097 = ORIENTED_EDGE('',*,*,#11098,.T.); +#11098 = EDGE_CURVE('',#10793,#11099,#11101,.T.); +#11099 = VERTEX_POINT('',#11100); +#11100 = CARTESIAN_POINT('',(-4.599999165537,-5.7,3.000001096723)); +#11101 = LINE('',#11102,#11103); +#11102 = CARTESIAN_POINT('',(-4.899999165537,-5.7,3.000001168248)); +#11103 = VECTOR('',#11104,1.); +#11104 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11105 = ORIENTED_EDGE('',*,*,#11106,.T.); +#11106 = EDGE_CURVE('',#11099,#11075,#11107,.T.); +#11107 = LINE('',#11108,#11109); +#11108 = CARTESIAN_POINT('',(-4.599999165537,-5.7,3.000001096723)); +#11109 = VECTOR('',#11110,1.); +#11110 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#11111 = ORIENTED_EDGE('',*,*,#11074,.F.); +#11112 = ORIENTED_EDGE('',*,*,#10800,.F.); +#11113 = PLANE('',#11114); +#11114 = AXIS2_PLACEMENT_3D('',#11115,#11116,#11117); +#11115 = CARTESIAN_POINT('',(-4.899999165537,-5.7,3.000001168248)); +#11116 = DIRECTION('',(2.384180143219E-07,1.232595164408E-32,1.)); +#11117 = DIRECTION('',(-1.110223024625E-16,1.,2.646971688623E-23)); +#11118 = ADVANCED_FACE('',(#11119),#11137,.F.); +#11119 = FACE_BOUND('',#11120,.T.); +#11120 = EDGE_LOOP('',(#11121,#11129,#11135,#11136)); +#11121 = ORIENTED_EDGE('',*,*,#11122,.T.); +#11122 = EDGE_CURVE('',#10785,#11123,#11125,.T.); +#11123 = VERTEX_POINT('',#11124); +#11124 = CARTESIAN_POINT('',(-4.599999880791,-5.7,1.096722851202E-06)); +#11125 = LINE('',#11126,#11127); +#11126 = CARTESIAN_POINT('',(-4.899999880791,-5.7,1.168248255423E-06)); +#11127 = VECTOR('',#11128,1.); +#11128 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11129 = ORIENTED_EDGE('',*,*,#11130,.T.); +#11130 = EDGE_CURVE('',#11123,#11099,#11131,.T.); +#11131 = LINE('',#11132,#11133); +#11132 = CARTESIAN_POINT('',(-4.599999880791,-5.7,1.096722851146E-06)); +#11133 = VECTOR('',#11134,1.); +#11134 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#11135 = ORIENTED_EDGE('',*,*,#11098,.F.); +#11136 = ORIENTED_EDGE('',*,*,#10792,.F.); +#11137 = PLANE('',#11138); +#11138 = AXIS2_PLACEMENT_3D('',#11139,#11140,#11141); +#11139 = CARTESIAN_POINT('',(-4.899999880791,-5.7,1.168248255423E-06)); +#11140 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#11141 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#11142 = ADVANCED_FACE('',(#11143),#11154,.F.); +#11143 = FACE_BOUND('',#11144,.T.); +#11144 = EDGE_LOOP('',(#11145,#11146,#11152,#11153)); +#11145 = ORIENTED_EDGE('',*,*,#10950,.T.); +#11146 = ORIENTED_EDGE('',*,*,#11147,.T.); +#11147 = EDGE_CURVE('',#10943,#11123,#11148,.T.); +#11148 = LINE('',#11149,#11150); +#11149 = CARTESIAN_POINT('',(-4.599999880791,-2.2,1.096722851146E-06)); +#11150 = VECTOR('',#11151,1.); +#11151 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#11152 = ORIENTED_EDGE('',*,*,#11122,.F.); +#11153 = ORIENTED_EDGE('',*,*,#10784,.F.); +#11154 = PLANE('',#11155); +#11155 = AXIS2_PLACEMENT_3D('',#11156,#11157,#11158); +#11156 = CARTESIAN_POINT('',(-4.899999880791,-2.2,1.168248255423E-06)); +#11157 = DIRECTION('',(2.384180143219E-07,1.232595164408E-32,1.)); +#11158 = DIRECTION('',(-1.110223024625E-16,1.,2.646971688623E-23)); +#11159 = ADVANCED_FACE('',(#11160),#11178,.F.); +#11160 = FACE_BOUND('',#11161,.T.); +#11161 = EDGE_LOOP('',(#11162,#11170,#11176,#11177)); +#11162 = ORIENTED_EDGE('',*,*,#11163,.T.); +#11163 = EDGE_CURVE('',#10754,#11164,#11166,.T.); +#11164 = VERTEX_POINT('',#11165); +#11165 = CARTESIAN_POINT('',(-4.599999880791,-8.3,1.096722851202E-06)); +#11166 = LINE('',#11167,#11168); +#11167 = CARTESIAN_POINT('',(-4.899999880791,-8.3,1.168248255423E-06)); +#11168 = VECTOR('',#11169,1.); +#11169 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11170 = ORIENTED_EDGE('',*,*,#11171,.T.); +#11171 = EDGE_CURVE('',#11164,#10918,#11172,.T.); +#11172 = LINE('',#11173,#11174); +#11173 = CARTESIAN_POINT('',(-4.599999880791,-8.3,1.096722851146E-06)); +#11174 = VECTOR('',#11175,1.); +#11175 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#11176 = ORIENTED_EDGE('',*,*,#10917,.F.); +#11177 = ORIENTED_EDGE('',*,*,#10761,.F.); +#11178 = PLANE('',#11179); +#11179 = AXIS2_PLACEMENT_3D('',#11180,#11181,#11182); +#11180 = CARTESIAN_POINT('',(-4.899999880791,-8.3,1.168248255423E-06)); +#11181 = DIRECTION('',(2.384180143219E-07,1.232595164408E-32,1.)); +#11182 = DIRECTION('',(-1.110223024625E-16,1.,2.646971688623E-23)); +#11183 = ADVANCED_FACE('',(#11184),#11202,.F.); +#11184 = FACE_BOUND('',#11185,.T.); +#11185 = EDGE_LOOP('',(#11186,#11194,#11200,#11201)); +#11186 = ORIENTED_EDGE('',*,*,#11187,.T.); +#11187 = EDGE_CURVE('',#10746,#11188,#11190,.T.); +#11188 = VERTEX_POINT('',#11189); +#11189 = CARTESIAN_POINT('',(-4.599999165537,-8.3,3.000001096723)); +#11190 = LINE('',#11191,#11192); +#11191 = CARTESIAN_POINT('',(-4.899999165537,-8.3,3.000001168248)); +#11192 = VECTOR('',#11193,1.); +#11193 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11194 = ORIENTED_EDGE('',*,*,#11195,.T.); +#11195 = EDGE_CURVE('',#11188,#11164,#11196,.T.); +#11196 = LINE('',#11197,#11198); +#11197 = CARTESIAN_POINT('',(-4.599999165537,-8.3,3.000001096723)); +#11198 = VECTOR('',#11199,1.); +#11199 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#11200 = ORIENTED_EDGE('',*,*,#11163,.F.); +#11201 = ORIENTED_EDGE('',*,*,#10753,.F.); +#11202 = PLANE('',#11203); +#11203 = AXIS2_PLACEMENT_3D('',#11204,#11205,#11206); +#11204 = CARTESIAN_POINT('',(-4.899999165537,-8.3,3.000001168248)); +#11205 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#11206 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#11207 = ADVANCED_FACE('',(#11208),#11226,.F.); +#11208 = FACE_BOUND('',#11209,.T.); +#11209 = EDGE_LOOP('',(#11210,#11218,#11224,#11225)); +#11210 = ORIENTED_EDGE('',*,*,#11211,.T.); +#11211 = EDGE_CURVE('',#10738,#11212,#11214,.T.); +#11212 = VERTEX_POINT('',#11213); +#11213 = CARTESIAN_POINT('',(-4.599999165537,-8.,3.000001096723)); +#11214 = LINE('',#11215,#11216); +#11215 = CARTESIAN_POINT('',(-4.899999165537,-8.,3.000001168248)); +#11216 = VECTOR('',#11217,1.); +#11217 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11218 = ORIENTED_EDGE('',*,*,#11219,.T.); +#11219 = EDGE_CURVE('',#11212,#11188,#11220,.T.); +#11220 = LINE('',#11221,#11222); +#11221 = CARTESIAN_POINT('',(-4.599999165537,-8.,3.000001096723)); +#11222 = VECTOR('',#11223,1.); +#11223 = DIRECTION('',(-3.488244315274E-30,-1.,-2.646971654213E-23)); +#11224 = ORIENTED_EDGE('',*,*,#11187,.F.); +#11225 = ORIENTED_EDGE('',*,*,#10745,.F.); +#11226 = PLANE('',#11227); +#11227 = AXIS2_PLACEMENT_3D('',#11228,#11229,#11230); +#11228 = CARTESIAN_POINT('',(-4.899999165537,-8.,3.000001168248)); +#11229 = DIRECTION('',(2.384180143219E-07,1.232595164408E-32,1.)); +#11230 = DIRECTION('',(-1.110223024625E-16,1.,2.646971688623E-23)); +#11231 = ADVANCED_FACE('',(#11232),#11250,.F.); +#11232 = FACE_BOUND('',#11233,.T.); +#11233 = EDGE_LOOP('',(#11234,#11242,#11248,#11249)); +#11234 = ORIENTED_EDGE('',*,*,#11235,.T.); +#11235 = EDGE_CURVE('',#10730,#11236,#11238,.T.); +#11236 = VERTEX_POINT('',#11237); +#11237 = CARTESIAN_POINT('',(-4.599999880791,-8.,1.096722851202E-06)); +#11238 = LINE('',#11239,#11240); +#11239 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#11240 = VECTOR('',#11241,1.); +#11241 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11242 = ORIENTED_EDGE('',*,*,#11243,.T.); +#11243 = EDGE_CURVE('',#11236,#11212,#11244,.T.); +#11244 = LINE('',#11245,#11246); +#11245 = CARTESIAN_POINT('',(-4.599999880791,-8.,1.096722851146E-06)); +#11246 = VECTOR('',#11247,1.); +#11247 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#11248 = ORIENTED_EDGE('',*,*,#11211,.F.); +#11249 = ORIENTED_EDGE('',*,*,#10737,.F.); +#11250 = PLANE('',#11251); +#11251 = AXIS2_PLACEMENT_3D('',#11252,#11253,#11254); +#11252 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#11253 = DIRECTION('',(-2.646971689856E-23,1.,-1.110223024625E-16)); +#11254 = DIRECTION('',(-2.384180142109E-07,-1.110223024625E-16,-1.)); +#11255 = ADVANCED_FACE('',(#11256),#11274,.T.); +#11256 = FACE_BOUND('',#11257,.F.); +#11257 = EDGE_LOOP('',(#11258,#11259,#11260,#11268)); +#11258 = ORIENTED_EDGE('',*,*,#10729,.F.); +#11259 = ORIENTED_EDGE('',*,*,#11235,.T.); +#11260 = ORIENTED_EDGE('',*,*,#11261,.T.); +#11261 = EDGE_CURVE('',#11236,#11262,#11264,.T.); +#11262 = VERTEX_POINT('',#11263); +#11263 = CARTESIAN_POINT('',(-4.600000476836,-8.,-2.499998903277)); +#11264 = LINE('',#11265,#11266); +#11265 = CARTESIAN_POINT('',(-4.599999880791,-8.,1.096722851146E-06)); +#11266 = VECTOR('',#11267,1.); +#11267 = DIRECTION('',(-2.384180143219E-07,-2.22044604925E-16,-1.)); +#11268 = ORIENTED_EDGE('',*,*,#11269,.F.); +#11269 = EDGE_CURVE('',#10722,#11262,#11270,.T.); +#11270 = LINE('',#11271,#11272); +#11271 = CARTESIAN_POINT('',(-4.900000476836,-8.,-2.499998831752)); +#11272 = VECTOR('',#11273,1.); +#11273 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11274 = PLANE('',#11275); +#11275 = AXIS2_PLACEMENT_3D('',#11276,#11277,#11278); +#11276 = CARTESIAN_POINT('',(-4.899999880791,-8.,1.168248255423E-06)); +#11277 = DIRECTION('',(2.646971689856E-23,-1.,1.110223024625E-16)); +#11278 = DIRECTION('',(2.384180142109E-07,1.110223024625E-16,1.)); +#11279 = ADVANCED_FACE('',(#11280),#11298,.T.); +#11280 = FACE_BOUND('',#11281,.T.); +#11281 = EDGE_LOOP('',(#11282,#11283,#11291,#11297)); +#11282 = ORIENTED_EDGE('',*,*,#10721,.F.); +#11283 = ORIENTED_EDGE('',*,*,#11284,.T.); +#11284 = EDGE_CURVE('',#10714,#11285,#11287,.T.); +#11285 = VERTEX_POINT('',#11286); +#11286 = CARTESIAN_POINT('',(-4.600000596045,-7.5,-2.999998903277)); +#11287 = LINE('',#11288,#11289); +#11288 = CARTESIAN_POINT('',(-4.900000596045,-7.5,-2.999998831752)); +#11289 = VECTOR('',#11290,1.); +#11290 = DIRECTION('',(1.,0.,-2.384180143219E-07)); +#11291 = ORIENTED_EDGE('',*,*,#11292,.T.); +#11292 = EDGE_CURVE('',#11285,#11262,#11293,.T.); +#11293 = LINE('',#11294,#11295); +#11294 = CARTESIAN_POINT('',(-4.60000053644,-7.75,-2.749998903277)); +#11295 = VECTOR('',#11296,1.); +#11296 = DIRECTION('',(1.68586994684E-07,-0.707106781187,0.707106781187) + ); +#11297 = ORIENTED_EDGE('',*,*,#11269,.F.); +#11298 = PLANE('',#11299); +#11299 = AXIS2_PLACEMENT_3D('',#11300,#11301,#11302); +#11300 = CARTESIAN_POINT('',(-4.90000053644,-7.75,-2.749998831752)); +#11301 = DIRECTION('',(-1.685869946959E-07,-0.707106781187, + -0.707106781187)); +#11302 = DIRECTION('',(1.,-8.342414262618E-18,-2.384180143303E-07)); +#11303 = ADVANCED_FACE('',(#11304),#11315,.T.); +#11304 = FACE_BOUND('',#11305,.F.); +#11305 = EDGE_LOOP('',(#11306,#11307,#11308,#11314)); +#11306 = ORIENTED_EDGE('',*,*,#10713,.F.); +#11307 = ORIENTED_EDGE('',*,*,#11284,.T.); +#11308 = ORIENTED_EDGE('',*,*,#11309,.T.); +#11309 = EDGE_CURVE('',#11285,#11021,#11310,.T.); +#11310 = LINE('',#11311,#11312); +#11311 = CARTESIAN_POINT('',(-4.600000596045,-8.,-2.999998903277)); +#11312 = VECTOR('',#11313,1.); +#11313 = DIRECTION('',(3.488244315274E-30,1.,2.646971654213E-23)); +#11314 = ORIENTED_EDGE('',*,*,#11020,.F.); +#11315 = PLANE('',#11316); +#11316 = AXIS2_PLACEMENT_3D('',#11317,#11318,#11319); +#11317 = CARTESIAN_POINT('',(-4.900000596045,-8.,-2.999998831752)); +#11318 = DIRECTION('',(-2.384180143219E-07,-1.232595164408E-32,-1.)); +#11319 = DIRECTION('',(1.110223024625E-16,-1.,-2.646971688623E-23)); +#11320 = ADVANCED_FACE('',(#11321),#11332,.F.); +#11321 = FACE_BOUND('',#11322,.T.); +#11322 = EDGE_LOOP('',(#11323,#11324,#11330,#11331)); +#11323 = ORIENTED_EDGE('',*,*,#10871,.T.); +#11324 = ORIENTED_EDGE('',*,*,#11325,.T.); +#11325 = EDGE_CURVE('',#10864,#10997,#11326,.T.); +#11326 = LINE('',#11327,#11328); +#11327 = CARTESIAN_POINT('',(-4.599997758871,-10.8,8.900001096723)); +#11328 = VECTOR('',#11329,1.); +#11329 = DIRECTION('',(3.488244315274E-30,1.,2.646971654213E-23)); +#11330 = ORIENTED_EDGE('',*,*,#10996,.F.); +#11331 = ORIENTED_EDGE('',*,*,#10847,.F.); +#11332 = PLANE('',#11333); +#11333 = AXIS2_PLACEMENT_3D('',#11334,#11335,#11336); +#11334 = CARTESIAN_POINT('',(-4.899997758871,-10.8,8.900001168248)); +#11335 = DIRECTION('',(-2.384180143219E-07,-1.232595164408E-32,-1.)); +#11336 = DIRECTION('',(1.110223024625E-16,-1.,-2.646971688623E-23)); +#11337 = ADVANCED_FACE('',(#11338),#11349,.T.); +#11338 = FACE_BOUND('',#11339,.F.); +#11339 = EDGE_LOOP('',(#11340,#11341,#11347,#11348)); +#11340 = ORIENTED_EDGE('',*,*,#11004,.T.); +#11341 = ORIENTED_EDGE('',*,*,#11342,.F.); +#11342 = EDGE_CURVE('',#10651,#10674,#11343,.T.); +#11343 = LINE('',#11344,#11345); +#11344 = CARTESIAN_POINT('',(-4.599997758871,-5.1,8.9)); +#11345 = VECTOR('',#11346,1.); +#11346 = DIRECTION('',(2.646971722006E-23,1.,0.)); +#11347 = ORIENTED_EDGE('',*,*,#10863,.T.); +#11348 = ORIENTED_EDGE('',*,*,#11325,.T.); +#11349 = PLANE('',#11350); +#11350 = AXIS2_PLACEMENT_3D('',#11351,#11352,#11353); +#11351 = CARTESIAN_POINT('',(-4.600000596045,-8.,-2.999998903277)); +#11352 = DIRECTION('',(1.,-2.646971722006E-23,-2.384180143219E-07)); +#11353 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#11354 = ADVANCED_FACE('',(#11355),#11371,.F.); +#11355 = FACE_BOUND('',#11356,.F.); +#11356 = EDGE_LOOP('',(#11357,#11358,#11364,#11365)); +#11357 = ORIENTED_EDGE('',*,*,#10964,.F.); +#11358 = ORIENTED_EDGE('',*,*,#11359,.F.); +#11359 = EDGE_CURVE('',#10643,#10682,#11360,.T.); +#11360 = LINE('',#11361,#11362); +#11361 = CARTESIAN_POINT('',(-4.599997830396,-5.1,8.6)); +#11362 = VECTOR('',#11363,1.); +#11363 = DIRECTION('',(2.646971722006E-23,1.,0.)); +#11364 = ORIENTED_EDGE('',*,*,#10885,.F.); +#11365 = ORIENTED_EDGE('',*,*,#11366,.T.); +#11366 = EDGE_CURVE('',#10886,#10965,#11367,.T.); +#11367 = LINE('',#11368,#11369); +#11368 = CARTESIAN_POINT('',(4.6,-5.1,8.6)); +#11369 = VECTOR('',#11370,1.); +#11370 = DIRECTION('',(0.,1.,0.)); +#11371 = PLANE('',#11372); +#11372 = AXIS2_PLACEMENT_3D('',#11373,#11374,#11375); +#11373 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#11374 = DIRECTION('',(0.,0.,1.)); +#11375 = DIRECTION('',(1.,0.,-0.)); +#11376 = ADVANCED_FACE('',(#11377),#11388,.T.); +#11377 = FACE_BOUND('',#11378,.T.); +#11378 = EDGE_LOOP('',(#11379,#11385,#11386,#11387)); +#11379 = ORIENTED_EDGE('',*,*,#11380,.T.); +#11380 = EDGE_CURVE('',#10894,#10974,#11381,.T.); +#11381 = LINE('',#11382,#11383); +#11382 = CARTESIAN_POINT('',(4.6,-10.8,8.9)); +#11383 = VECTOR('',#11384,1.); +#11384 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#11385 = ORIENTED_EDGE('',*,*,#10973,.F.); +#11386 = ORIENTED_EDGE('',*,*,#11342,.F.); +#11387 = ORIENTED_EDGE('',*,*,#10901,.F.); +#11388 = PLANE('',#11389); +#11389 = AXIS2_PLACEMENT_3D('',#11390,#11391,#11392); +#11390 = CARTESIAN_POINT('',(-4.9,-2.2,8.9)); +#11391 = DIRECTION('',(0.,0.,1.)); +#11392 = DIRECTION('',(1.,0.,-0.)); +#11393 = ADVANCED_FACE('',(#11394),#11419,.F.); +#11394 = FACE_BOUND('',#11395,.F.); +#11395 = EDGE_LOOP('',(#11396,#11406,#11412,#11413)); +#11396 = ORIENTED_EDGE('',*,*,#11397,.F.); +#11397 = EDGE_CURVE('',#11398,#11400,#11402,.T.); +#11398 = VERTEX_POINT('',#11399); +#11399 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#11400 = VERTEX_POINT('',#11401); +#11401 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#11402 = LINE('',#11403,#11404); +#11403 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#11404 = VECTOR('',#11405,1.); +#11405 = DIRECTION('',(0.,0.,1.)); +#11406 = ORIENTED_EDGE('',*,*,#11407,.T.); +#11407 = EDGE_CURVE('',#11398,#10886,#11408,.T.); +#11408 = LINE('',#11409,#11410); +#11409 = CARTESIAN_POINT('',(4.9,-10.8,8.6)); +#11410 = VECTOR('',#11411,1.); +#11411 = DIRECTION('',(-1.,0.,0.)); +#11412 = ORIENTED_EDGE('',*,*,#10893,.T.); +#11413 = ORIENTED_EDGE('',*,*,#11414,.F.); +#11414 = EDGE_CURVE('',#11400,#10894,#11415,.T.); +#11415 = LINE('',#11416,#11417); +#11416 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#11417 = VECTOR('',#11418,1.); +#11418 = DIRECTION('',(-1.,0.,0.)); +#11419 = PLANE('',#11420); +#11420 = AXIS2_PLACEMENT_3D('',#11421,#11422,#11423); +#11421 = CARTESIAN_POINT('',(4.9,-10.8,0.)); +#11422 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#11423 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#11424 = ADVANCED_FACE('',(#11425),#11443,.T.); +#11425 = FACE_BOUND('',#11426,.F.); +#11426 = EDGE_LOOP('',(#11427,#11428,#11429,#11430,#11431,#11432,#11433, + #11434,#11435,#11436,#11437,#11438,#11439,#11440,#11441,#11442)); +#11427 = ORIENTED_EDGE('',*,*,#11028,.F.); +#11428 = ORIENTED_EDGE('',*,*,#11309,.F.); +#11429 = ORIENTED_EDGE('',*,*,#11292,.T.); +#11430 = ORIENTED_EDGE('',*,*,#11261,.F.); +#11431 = ORIENTED_EDGE('',*,*,#11243,.T.); +#11432 = ORIENTED_EDGE('',*,*,#11219,.T.); +#11433 = ORIENTED_EDGE('',*,*,#11195,.T.); +#11434 = ORIENTED_EDGE('',*,*,#11171,.T.); +#11435 = ORIENTED_EDGE('',*,*,#10925,.T.); +#11436 = ORIENTED_EDGE('',*,*,#11359,.T.); +#11437 = ORIENTED_EDGE('',*,*,#10942,.T.); +#11438 = ORIENTED_EDGE('',*,*,#11147,.T.); +#11439 = ORIENTED_EDGE('',*,*,#11130,.T.); +#11440 = ORIENTED_EDGE('',*,*,#11106,.T.); +#11441 = ORIENTED_EDGE('',*,*,#11082,.T.); +#11442 = ORIENTED_EDGE('',*,*,#11052,.F.); +#11443 = PLANE('',#11444); +#11444 = AXIS2_PLACEMENT_3D('',#11445,#11446,#11447); +#11445 = CARTESIAN_POINT('',(-4.600000596045,-8.,-2.999998903277)); +#11446 = DIRECTION('',(1.,-2.646971722006E-23,-2.384180143219E-07)); +#11447 = DIRECTION('',(2.384180143219E-07,2.22044604925E-16,1.)); +#11448 = ADVANCED_FACE('',(#11449),#11474,.F.); +#11449 = FACE_BOUND('',#11450,.F.); +#11450 = EDGE_LOOP('',(#11451,#11461,#11467,#11468)); +#11451 = ORIENTED_EDGE('',*,*,#11452,.T.); +#11452 = EDGE_CURVE('',#11453,#11455,#11457,.T.); +#11453 = VERTEX_POINT('',#11454); +#11454 = CARTESIAN_POINT('',(4.9,-2.2,8.6)); +#11455 = VERTEX_POINT('',#11456); +#11456 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#11457 = LINE('',#11458,#11459); +#11458 = CARTESIAN_POINT('',(4.9,-2.2,8.6)); +#11459 = VECTOR('',#11460,1.); +#11460 = DIRECTION('',(0.,0.,1.)); +#11461 = ORIENTED_EDGE('',*,*,#11462,.T.); +#11462 = EDGE_CURVE('',#11455,#10974,#11463,.T.); +#11463 = LINE('',#11464,#11465); +#11464 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#11465 = VECTOR('',#11466,1.); +#11466 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11467 = ORIENTED_EDGE('',*,*,#10981,.T.); +#11468 = ORIENTED_EDGE('',*,*,#11469,.T.); +#11469 = EDGE_CURVE('',#10965,#11453,#11470,.T.); +#11470 = LINE('',#11471,#11472); +#11471 = CARTESIAN_POINT('',(-4.9,-2.2,8.6)); +#11472 = VECTOR('',#11473,1.); +#11473 = DIRECTION('',(1.,0.,0.)); +#11474 = PLANE('',#11475); +#11475 = AXIS2_PLACEMENT_3D('',#11476,#11477,#11478); +#11476 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#11477 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11478 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#11479 = ADVANCED_FACE('',(#11480),#11601,.T.); +#11480 = FACE_BOUND('',#11481,.T.); +#11481 = EDGE_LOOP('',(#11482,#11492,#11500,#11508,#11516,#11524,#11532, + #11540,#11548,#11554,#11555,#11563,#11571,#11579,#11587,#11595)); +#11482 = ORIENTED_EDGE('',*,*,#11483,.F.); +#11483 = EDGE_CURVE('',#11484,#11486,#11488,.T.); +#11484 = VERTEX_POINT('',#11485); +#11485 = CARTESIAN_POINT('',(4.6,-6.5,-3.)); +#11486 = VERTEX_POINT('',#11487); +#11487 = CARTESIAN_POINT('',(4.6,-6.,-2.5)); +#11488 = LINE('',#11489,#11490); +#11489 = CARTESIAN_POINT('',(4.6,-6.75,-3.25)); +#11490 = VECTOR('',#11491,1.); +#11491 = DIRECTION('',(-7.850462293414E-17,0.707106781187,0.707106781187 + )); +#11492 = ORIENTED_EDGE('',*,*,#11493,.F.); +#11493 = EDGE_CURVE('',#11494,#11484,#11496,.T.); +#11494 = VERTEX_POINT('',#11495); +#11495 = CARTESIAN_POINT('',(4.6,-7.5,-3.)); +#11496 = LINE('',#11497,#11498); +#11497 = CARTESIAN_POINT('',(4.6,-8.,-3.)); +#11498 = VECTOR('',#11499,1.); +#11499 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#11500 = ORIENTED_EDGE('',*,*,#11501,.T.); +#11501 = EDGE_CURVE('',#11494,#11502,#11504,.T.); +#11502 = VERTEX_POINT('',#11503); +#11503 = CARTESIAN_POINT('',(4.6,-8.,-2.5)); +#11504 = LINE('',#11505,#11506); +#11505 = CARTESIAN_POINT('',(4.6,-7.75,-2.75)); +#11506 = VECTOR('',#11507,1.); +#11507 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#11508 = ORIENTED_EDGE('',*,*,#11509,.F.); +#11509 = EDGE_CURVE('',#11510,#11502,#11512,.T.); +#11510 = VERTEX_POINT('',#11511); +#11511 = CARTESIAN_POINT('',(4.6,-8.,-3.330669073875E-17)); +#11512 = LINE('',#11513,#11514); +#11513 = CARTESIAN_POINT('',(4.6,-8.,8.548717289614E-16)); +#11514 = VECTOR('',#11515,1.); +#11515 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11516 = ORIENTED_EDGE('',*,*,#11517,.T.); +#11517 = EDGE_CURVE('',#11510,#11518,#11520,.T.); +#11518 = VERTEX_POINT('',#11519); +#11519 = CARTESIAN_POINT('',(4.6,-8.,3.)); +#11520 = LINE('',#11521,#11522); +#11521 = CARTESIAN_POINT('',(4.6,-8.,8.548717289614E-16)); +#11522 = VECTOR('',#11523,1.); +#11523 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#11524 = ORIENTED_EDGE('',*,*,#11525,.T.); +#11525 = EDGE_CURVE('',#11518,#11526,#11528,.T.); +#11526 = VERTEX_POINT('',#11527); +#11527 = CARTESIAN_POINT('',(4.6,-8.3,3.)); +#11528 = LINE('',#11529,#11530); +#11529 = CARTESIAN_POINT('',(4.6,-8.,3.)); +#11530 = VECTOR('',#11531,1.); +#11531 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11532 = ORIENTED_EDGE('',*,*,#11533,.T.); +#11533 = EDGE_CURVE('',#11526,#11534,#11536,.T.); +#11534 = VERTEX_POINT('',#11535); +#11535 = CARTESIAN_POINT('',(4.6,-8.3,-3.330669073875E-17)); +#11536 = LINE('',#11537,#11538); +#11537 = CARTESIAN_POINT('',(4.6,-8.3,3.)); +#11538 = VECTOR('',#11539,1.); +#11539 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11540 = ORIENTED_EDGE('',*,*,#11541,.T.); +#11541 = EDGE_CURVE('',#11534,#11542,#11544,.T.); +#11542 = VERTEX_POINT('',#11543); +#11543 = CARTESIAN_POINT('',(4.6,-10.8,-3.330669073875E-17)); +#11544 = LINE('',#11545,#11546); +#11545 = CARTESIAN_POINT('',(4.6,-8.3,8.881784197001E-16)); +#11546 = VECTOR('',#11547,1.); +#11547 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11548 = ORIENTED_EDGE('',*,*,#11549,.T.); +#11549 = EDGE_CURVE('',#11542,#10886,#11550,.T.); +#11550 = LINE('',#11551,#11552); +#11551 = CARTESIAN_POINT('',(4.6,-10.8,1.165734175856E-15)); +#11552 = VECTOR('',#11553,1.); +#11553 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#11554 = ORIENTED_EDGE('',*,*,#11366,.T.); +#11555 = ORIENTED_EDGE('',*,*,#11556,.T.); +#11556 = EDGE_CURVE('',#10965,#11557,#11559,.T.); +#11557 = VERTEX_POINT('',#11558); +#11558 = CARTESIAN_POINT('',(4.6,-2.2,-3.330669073875E-17)); +#11559 = LINE('',#11560,#11561); +#11560 = CARTESIAN_POINT('',(4.6,-2.2,8.9)); +#11561 = VECTOR('',#11562,1.); +#11562 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11563 = ORIENTED_EDGE('',*,*,#11564,.T.); +#11564 = EDGE_CURVE('',#11557,#11565,#11567,.T.); +#11565 = VERTEX_POINT('',#11566); +#11566 = CARTESIAN_POINT('',(4.6,-5.7,-3.330669073875E-17)); +#11567 = LINE('',#11568,#11569); +#11568 = CARTESIAN_POINT('',(4.6,-2.2,2.109423746788E-16)); +#11569 = VECTOR('',#11570,1.); +#11570 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11571 = ORIENTED_EDGE('',*,*,#11572,.T.); +#11572 = EDGE_CURVE('',#11565,#11573,#11575,.T.); +#11573 = VERTEX_POINT('',#11574); +#11574 = CARTESIAN_POINT('',(4.6,-5.7,3.)); +#11575 = LINE('',#11576,#11577); +#11576 = CARTESIAN_POINT('',(4.6,-5.7,5.995204332976E-16)); +#11577 = VECTOR('',#11578,1.); +#11578 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#11579 = ORIENTED_EDGE('',*,*,#11580,.T.); +#11580 = EDGE_CURVE('',#11573,#11581,#11583,.T.); +#11581 = VERTEX_POINT('',#11582); +#11582 = CARTESIAN_POINT('',(4.6,-6.,3.)); +#11583 = LINE('',#11584,#11585); +#11584 = CARTESIAN_POINT('',(4.6,-5.7,3.)); +#11585 = VECTOR('',#11586,1.); +#11586 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11587 = ORIENTED_EDGE('',*,*,#11588,.T.); +#11588 = EDGE_CURVE('',#11581,#11589,#11591,.T.); +#11589 = VERTEX_POINT('',#11590); +#11590 = CARTESIAN_POINT('',(4.6,-6.,-3.330669073875E-17)); +#11591 = LINE('',#11592,#11593); +#11592 = CARTESIAN_POINT('',(4.6,-6.,3.)); +#11593 = VECTOR('',#11594,1.); +#11594 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11595 = ORIENTED_EDGE('',*,*,#11596,.F.); +#11596 = EDGE_CURVE('',#11486,#11589,#11597,.T.); +#11597 = LINE('',#11598,#11599); +#11598 = CARTESIAN_POINT('',(4.6,-6.,-3.)); +#11599 = VECTOR('',#11600,1.); +#11600 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#11601 = PLANE('',#11602); +#11602 = AXIS2_PLACEMENT_3D('',#11603,#11604,#11605); +#11603 = CARTESIAN_POINT('',(4.6,-8.,-3.)); +#11604 = DIRECTION('',(-1.,0.,-1.110223024625E-16)); +#11605 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11606 = ADVANCED_FACE('',(#11607),#11618,.F.); +#11607 = FACE_BOUND('',#11608,.F.); +#11608 = EDGE_LOOP('',(#11609,#11610,#11611,#11612)); +#11609 = ORIENTED_EDGE('',*,*,#11414,.T.); +#11610 = ORIENTED_EDGE('',*,*,#11380,.T.); +#11611 = ORIENTED_EDGE('',*,*,#11462,.F.); +#11612 = ORIENTED_EDGE('',*,*,#11613,.T.); +#11613 = EDGE_CURVE('',#11455,#11400,#11614,.T.); +#11614 = LINE('',#11615,#11616); +#11615 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#11616 = VECTOR('',#11617,1.); +#11617 = DIRECTION('',(0.,-1.,0.)); +#11618 = PLANE('',#11619); +#11619 = AXIS2_PLACEMENT_3D('',#11620,#11621,#11622); +#11620 = CARTESIAN_POINT('',(4.9,-10.8,8.9)); +#11621 = DIRECTION('',(1.110223024625E-16,-1.232595164408E-32,-1.)); +#11622 = DIRECTION('',(1.110223024625E-16,1.,-5.167288087198E-45)); +#11623 = ADVANCED_FACE('',(#11624),#11635,.T.); +#11624 = FACE_BOUND('',#11625,.T.); +#11625 = EDGE_LOOP('',(#11626,#11627,#11628,#11629)); +#11626 = ORIENTED_EDGE('',*,*,#11452,.T.); +#11627 = ORIENTED_EDGE('',*,*,#11613,.T.); +#11628 = ORIENTED_EDGE('',*,*,#11397,.F.); +#11629 = ORIENTED_EDGE('',*,*,#11630,.F.); +#11630 = EDGE_CURVE('',#11453,#11398,#11631,.T.); +#11631 = LINE('',#11632,#11633); +#11632 = CARTESIAN_POINT('',(4.9,-2.2,8.6)); +#11633 = VECTOR('',#11634,1.); +#11634 = DIRECTION('',(0.,-1.,0.)); +#11635 = PLANE('',#11636); +#11636 = AXIS2_PLACEMENT_3D('',#11637,#11638,#11639); +#11637 = CARTESIAN_POINT('',(4.9,-2.2,8.6)); +#11638 = DIRECTION('',(1.,0.,0.)); +#11639 = DIRECTION('',(0.,-1.,0.)); +#11640 = ADVANCED_FACE('',(#11641),#11659,.F.); +#11641 = FACE_BOUND('',#11642,.F.); +#11642 = EDGE_LOOP('',(#11643,#11651,#11657,#11658)); +#11643 = ORIENTED_EDGE('',*,*,#11644,.F.); +#11644 = EDGE_CURVE('',#11645,#11398,#11647,.T.); +#11645 = VERTEX_POINT('',#11646); +#11646 = CARTESIAN_POINT('',(4.9,-10.8,0.)); +#11647 = LINE('',#11648,#11649); +#11648 = CARTESIAN_POINT('',(4.9,-10.8,1.199040866595E-15)); +#11649 = VECTOR('',#11650,1.); +#11650 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#11651 = ORIENTED_EDGE('',*,*,#11652,.T.); +#11652 = EDGE_CURVE('',#11645,#11542,#11653,.T.); +#11653 = LINE('',#11654,#11655); +#11654 = CARTESIAN_POINT('',(4.9,-10.8,0.)); +#11655 = VECTOR('',#11656,1.); +#11656 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11657 = ORIENTED_EDGE('',*,*,#11549,.T.); +#11658 = ORIENTED_EDGE('',*,*,#11407,.F.); +#11659 = PLANE('',#11660); +#11660 = AXIS2_PLACEMENT_3D('',#11661,#11662,#11663); +#11661 = CARTESIAN_POINT('',(4.9,-10.8,0.)); +#11662 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#11663 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#11664 = ADVANCED_FACE('',(#11665),#11683,.F.); +#11665 = FACE_BOUND('',#11666,.F.); +#11666 = EDGE_LOOP('',(#11667,#11675,#11676,#11677)); +#11667 = ORIENTED_EDGE('',*,*,#11668,.F.); +#11668 = EDGE_CURVE('',#11453,#11669,#11671,.T.); +#11669 = VERTEX_POINT('',#11670); +#11670 = CARTESIAN_POINT('',(4.9,-2.2,0.)); +#11671 = LINE('',#11672,#11673); +#11672 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#11673 = VECTOR('',#11674,1.); +#11674 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11675 = ORIENTED_EDGE('',*,*,#11469,.F.); +#11676 = ORIENTED_EDGE('',*,*,#11556,.T.); +#11677 = ORIENTED_EDGE('',*,*,#11678,.F.); +#11678 = EDGE_CURVE('',#11669,#11557,#11679,.T.); +#11679 = LINE('',#11680,#11681); +#11680 = CARTESIAN_POINT('',(4.9,-2.2,0.)); +#11681 = VECTOR('',#11682,1.); +#11682 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11683 = PLANE('',#11684); +#11684 = AXIS2_PLACEMENT_3D('',#11685,#11686,#11687); +#11685 = CARTESIAN_POINT('',(4.9,-2.2,8.9)); +#11686 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11687 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#11688 = ADVANCED_FACE('',(#11689),#11714,.T.); +#11689 = FACE_BOUND('',#11690,.T.); +#11690 = EDGE_LOOP('',(#11691,#11701,#11707,#11708)); +#11691 = ORIENTED_EDGE('',*,*,#11692,.F.); +#11692 = EDGE_CURVE('',#11693,#11695,#11697,.T.); +#11693 = VERTEX_POINT('',#11694); +#11694 = CARTESIAN_POINT('',(4.9,-6.5,-3.)); +#11695 = VERTEX_POINT('',#11696); +#11696 = CARTESIAN_POINT('',(4.9,-6.,-2.5)); +#11697 = LINE('',#11698,#11699); +#11698 = CARTESIAN_POINT('',(4.9,-6.75,-3.25)); +#11699 = VECTOR('',#11700,1.); +#11700 = DIRECTION('',(-7.850462293414E-17,0.707106781187,0.707106781187 + )); +#11701 = ORIENTED_EDGE('',*,*,#11702,.T.); +#11702 = EDGE_CURVE('',#11693,#11484,#11703,.T.); +#11703 = LINE('',#11704,#11705); +#11704 = CARTESIAN_POINT('',(4.9,-6.5,-3.)); +#11705 = VECTOR('',#11706,1.); +#11706 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11707 = ORIENTED_EDGE('',*,*,#11483,.T.); +#11708 = ORIENTED_EDGE('',*,*,#11709,.F.); +#11709 = EDGE_CURVE('',#11695,#11486,#11710,.T.); +#11710 = LINE('',#11711,#11712); +#11711 = CARTESIAN_POINT('',(4.9,-6.,-2.5)); +#11712 = VECTOR('',#11713,1.); +#11713 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11714 = PLANE('',#11715); +#11715 = AXIS2_PLACEMENT_3D('',#11716,#11717,#11718); +#11716 = CARTESIAN_POINT('',(4.9,-6.25,-2.75)); +#11717 = DIRECTION('',(9.738707312125E-17,0.707106781187,-0.707106781187 + )); +#11718 = DIRECTION('',(-1.,1.335190857271E-17,-1.243742110352E-16)); +#11719 = ADVANCED_FACE('',(#11720),#11738,.T.); +#11720 = FACE_BOUND('',#11721,.T.); +#11721 = EDGE_LOOP('',(#11722,#11730,#11731,#11732)); +#11722 = ORIENTED_EDGE('',*,*,#11723,.F.); +#11723 = EDGE_CURVE('',#11695,#11724,#11726,.T.); +#11724 = VERTEX_POINT('',#11725); +#11725 = CARTESIAN_POINT('',(4.9,-6.,0.)); +#11726 = LINE('',#11727,#11728); +#11727 = CARTESIAN_POINT('',(4.9,-6.,-3.)); +#11728 = VECTOR('',#11729,1.); +#11729 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#11730 = ORIENTED_EDGE('',*,*,#11709,.T.); +#11731 = ORIENTED_EDGE('',*,*,#11596,.T.); +#11732 = ORIENTED_EDGE('',*,*,#11733,.F.); +#11733 = EDGE_CURVE('',#11724,#11589,#11734,.T.); +#11734 = LINE('',#11735,#11736); +#11735 = CARTESIAN_POINT('',(4.9,-6.,0.)); +#11736 = VECTOR('',#11737,1.); +#11737 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11738 = PLANE('',#11739); +#11739 = AXIS2_PLACEMENT_3D('',#11740,#11741,#11742); +#11740 = CARTESIAN_POINT('',(4.9,-6.,-3.)); +#11741 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#11742 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#11743 = ADVANCED_FACE('',(#11744),#11762,.F.); +#11744 = FACE_BOUND('',#11745,.F.); +#11745 = EDGE_LOOP('',(#11746,#11754,#11755,#11756)); +#11746 = ORIENTED_EDGE('',*,*,#11747,.T.); +#11747 = EDGE_CURVE('',#11748,#11581,#11750,.T.); +#11748 = VERTEX_POINT('',#11749); +#11749 = CARTESIAN_POINT('',(4.9,-6.,3.)); +#11750 = LINE('',#11751,#11752); +#11751 = CARTESIAN_POINT('',(4.9,-6.,3.)); +#11752 = VECTOR('',#11753,1.); +#11753 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11754 = ORIENTED_EDGE('',*,*,#11588,.T.); +#11755 = ORIENTED_EDGE('',*,*,#11733,.F.); +#11756 = ORIENTED_EDGE('',*,*,#11757,.F.); +#11757 = EDGE_CURVE('',#11748,#11724,#11758,.T.); +#11758 = LINE('',#11759,#11760); +#11759 = CARTESIAN_POINT('',(4.9,-6.,3.)); +#11760 = VECTOR('',#11761,1.); +#11761 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11762 = PLANE('',#11763); +#11763 = AXIS2_PLACEMENT_3D('',#11764,#11765,#11766); +#11764 = CARTESIAN_POINT('',(4.9,-6.,3.)); +#11765 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11766 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#11767 = ADVANCED_FACE('',(#11768),#11786,.F.); +#11768 = FACE_BOUND('',#11769,.F.); +#11769 = EDGE_LOOP('',(#11770,#11778,#11779,#11780)); +#11770 = ORIENTED_EDGE('',*,*,#11771,.T.); +#11771 = EDGE_CURVE('',#11772,#11573,#11774,.T.); +#11772 = VERTEX_POINT('',#11773); +#11773 = CARTESIAN_POINT('',(4.9,-5.7,3.)); +#11774 = LINE('',#11775,#11776); +#11775 = CARTESIAN_POINT('',(4.9,-5.7,3.)); +#11776 = VECTOR('',#11777,1.); +#11777 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11778 = ORIENTED_EDGE('',*,*,#11580,.T.); +#11779 = ORIENTED_EDGE('',*,*,#11747,.F.); +#11780 = ORIENTED_EDGE('',*,*,#11781,.F.); +#11781 = EDGE_CURVE('',#11772,#11748,#11782,.T.); +#11782 = LINE('',#11783,#11784); +#11783 = CARTESIAN_POINT('',(4.9,-5.7,3.)); +#11784 = VECTOR('',#11785,1.); +#11785 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11786 = PLANE('',#11787); +#11787 = AXIS2_PLACEMENT_3D('',#11788,#11789,#11790); +#11788 = CARTESIAN_POINT('',(4.9,-5.7,3.)); +#11789 = DIRECTION('',(-1.110223024625E-16,1.232595164408E-32,1.)); +#11790 = DIRECTION('',(-1.110223024625E-16,-1.,5.167288087198E-45)); +#11791 = ADVANCED_FACE('',(#11792),#11810,.F.); +#11792 = FACE_BOUND('',#11793,.F.); +#11793 = EDGE_LOOP('',(#11794,#11802,#11803,#11804)); +#11794 = ORIENTED_EDGE('',*,*,#11795,.T.); +#11795 = EDGE_CURVE('',#11796,#11565,#11798,.T.); +#11796 = VERTEX_POINT('',#11797); +#11797 = CARTESIAN_POINT('',(4.9,-5.7,0.)); +#11798 = LINE('',#11799,#11800); +#11799 = CARTESIAN_POINT('',(4.9,-5.7,0.)); +#11800 = VECTOR('',#11801,1.); +#11801 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11802 = ORIENTED_EDGE('',*,*,#11572,.T.); +#11803 = ORIENTED_EDGE('',*,*,#11771,.F.); +#11804 = ORIENTED_EDGE('',*,*,#11805,.F.); +#11805 = EDGE_CURVE('',#11796,#11772,#11806,.T.); +#11806 = LINE('',#11807,#11808); +#11807 = CARTESIAN_POINT('',(4.9,-5.7,6.328271240363E-16)); +#11808 = VECTOR('',#11809,1.); +#11809 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#11810 = PLANE('',#11811); +#11811 = AXIS2_PLACEMENT_3D('',#11812,#11813,#11814); +#11812 = CARTESIAN_POINT('',(4.9,-5.7,0.)); +#11813 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#11814 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#11815 = ADVANCED_FACE('',(#11816),#11827,.F.); +#11816 = FACE_BOUND('',#11817,.F.); +#11817 = EDGE_LOOP('',(#11818,#11819,#11820,#11821)); +#11818 = ORIENTED_EDGE('',*,*,#11678,.T.); +#11819 = ORIENTED_EDGE('',*,*,#11564,.T.); +#11820 = ORIENTED_EDGE('',*,*,#11795,.F.); +#11821 = ORIENTED_EDGE('',*,*,#11822,.F.); +#11822 = EDGE_CURVE('',#11669,#11796,#11823,.T.); +#11823 = LINE('',#11824,#11825); +#11824 = CARTESIAN_POINT('',(4.9,-2.2,2.442490654175E-16)); +#11825 = VECTOR('',#11826,1.); +#11826 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11827 = PLANE('',#11828); +#11828 = AXIS2_PLACEMENT_3D('',#11829,#11830,#11831); +#11829 = CARTESIAN_POINT('',(4.9,-2.2,0.)); +#11830 = DIRECTION('',(-1.110223024625E-16,1.232595164408E-32,1.)); +#11831 = DIRECTION('',(-1.110223024625E-16,-1.,5.167288087198E-45)); +#11832 = ADVANCED_FACE('',(#11833),#11851,.F.); +#11833 = FACE_BOUND('',#11834,.F.); +#11834 = EDGE_LOOP('',(#11835,#11843,#11844,#11845)); +#11835 = ORIENTED_EDGE('',*,*,#11836,.T.); +#11836 = EDGE_CURVE('',#11837,#11534,#11839,.T.); +#11837 = VERTEX_POINT('',#11838); +#11838 = CARTESIAN_POINT('',(4.9,-8.3,0.)); +#11839 = LINE('',#11840,#11841); +#11840 = CARTESIAN_POINT('',(4.9,-8.3,0.)); +#11841 = VECTOR('',#11842,1.); +#11842 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11843 = ORIENTED_EDGE('',*,*,#11541,.T.); +#11844 = ORIENTED_EDGE('',*,*,#11652,.F.); +#11845 = ORIENTED_EDGE('',*,*,#11846,.F.); +#11846 = EDGE_CURVE('',#11837,#11645,#11847,.T.); +#11847 = LINE('',#11848,#11849); +#11848 = CARTESIAN_POINT('',(4.9,-8.3,9.214851104389E-16)); +#11849 = VECTOR('',#11850,1.); +#11850 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11851 = PLANE('',#11852); +#11852 = AXIS2_PLACEMENT_3D('',#11853,#11854,#11855); +#11853 = CARTESIAN_POINT('',(4.9,-8.3,0.)); +#11854 = DIRECTION('',(-1.110223024625E-16,1.232595164408E-32,1.)); +#11855 = DIRECTION('',(-1.110223024625E-16,-1.,5.167288087198E-45)); +#11856 = ADVANCED_FACE('',(#11857),#11875,.F.); +#11857 = FACE_BOUND('',#11858,.F.); +#11858 = EDGE_LOOP('',(#11859,#11867,#11868,#11869)); +#11859 = ORIENTED_EDGE('',*,*,#11860,.T.); +#11860 = EDGE_CURVE('',#11861,#11526,#11863,.T.); +#11861 = VERTEX_POINT('',#11862); +#11862 = CARTESIAN_POINT('',(4.9,-8.3,3.)); +#11863 = LINE('',#11864,#11865); +#11864 = CARTESIAN_POINT('',(4.9,-8.3,3.)); +#11865 = VECTOR('',#11866,1.); +#11866 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11867 = ORIENTED_EDGE('',*,*,#11533,.T.); +#11868 = ORIENTED_EDGE('',*,*,#11836,.F.); +#11869 = ORIENTED_EDGE('',*,*,#11870,.F.); +#11870 = EDGE_CURVE('',#11861,#11837,#11871,.T.); +#11871 = LINE('',#11872,#11873); +#11872 = CARTESIAN_POINT('',(4.9,-8.3,3.)); +#11873 = VECTOR('',#11874,1.); +#11874 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11875 = PLANE('',#11876); +#11876 = AXIS2_PLACEMENT_3D('',#11877,#11878,#11879); +#11877 = CARTESIAN_POINT('',(4.9,-8.3,3.)); +#11878 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11879 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#11880 = ADVANCED_FACE('',(#11881),#11899,.F.); +#11881 = FACE_BOUND('',#11882,.F.); +#11882 = EDGE_LOOP('',(#11883,#11891,#11892,#11893)); +#11883 = ORIENTED_EDGE('',*,*,#11884,.T.); +#11884 = EDGE_CURVE('',#11885,#11518,#11887,.T.); +#11885 = VERTEX_POINT('',#11886); +#11886 = CARTESIAN_POINT('',(4.9,-8.,3.)); +#11887 = LINE('',#11888,#11889); +#11888 = CARTESIAN_POINT('',(4.9,-8.,3.)); +#11889 = VECTOR('',#11890,1.); +#11890 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11891 = ORIENTED_EDGE('',*,*,#11525,.T.); +#11892 = ORIENTED_EDGE('',*,*,#11860,.F.); +#11893 = ORIENTED_EDGE('',*,*,#11894,.F.); +#11894 = EDGE_CURVE('',#11885,#11861,#11895,.T.); +#11895 = LINE('',#11896,#11897); +#11896 = CARTESIAN_POINT('',(4.9,-8.,3.)); +#11897 = VECTOR('',#11898,1.); +#11898 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11899 = PLANE('',#11900); +#11900 = AXIS2_PLACEMENT_3D('',#11901,#11902,#11903); +#11901 = CARTESIAN_POINT('',(4.9,-8.,3.)); +#11902 = DIRECTION('',(-1.110223024625E-16,1.232595164408E-32,1.)); +#11903 = DIRECTION('',(-1.110223024625E-16,-1.,5.167288087198E-45)); +#11904 = ADVANCED_FACE('',(#11905),#11923,.F.); +#11905 = FACE_BOUND('',#11906,.F.); +#11906 = EDGE_LOOP('',(#11907,#11915,#11916,#11917)); +#11907 = ORIENTED_EDGE('',*,*,#11908,.T.); +#11908 = EDGE_CURVE('',#11909,#11510,#11911,.T.); +#11909 = VERTEX_POINT('',#11910); +#11910 = CARTESIAN_POINT('',(4.9,-8.,0.)); +#11911 = LINE('',#11912,#11913); +#11912 = CARTESIAN_POINT('',(4.9,-8.,0.)); +#11913 = VECTOR('',#11914,1.); +#11914 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11915 = ORIENTED_EDGE('',*,*,#11517,.T.); +#11916 = ORIENTED_EDGE('',*,*,#11884,.F.); +#11917 = ORIENTED_EDGE('',*,*,#11918,.F.); +#11918 = EDGE_CURVE('',#11909,#11885,#11919,.T.); +#11919 = LINE('',#11920,#11921); +#11920 = CARTESIAN_POINT('',(4.9,-8.,8.881784197001E-16)); +#11921 = VECTOR('',#11922,1.); +#11922 = DIRECTION('',(-1.110223024625E-16,1.110223024625E-16,1.)); +#11923 = PLANE('',#11924); +#11924 = AXIS2_PLACEMENT_3D('',#11925,#11926,#11927); +#11925 = CARTESIAN_POINT('',(4.9,-8.,0.)); +#11926 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#11927 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#11928 = ADVANCED_FACE('',(#11929),#11947,.T.); +#11929 = FACE_BOUND('',#11930,.T.); +#11930 = EDGE_LOOP('',(#11931,#11939,#11940,#11941)); +#11931 = ORIENTED_EDGE('',*,*,#11932,.F.); +#11932 = EDGE_CURVE('',#11909,#11933,#11935,.T.); +#11933 = VERTEX_POINT('',#11934); +#11934 = CARTESIAN_POINT('',(4.9,-8.,-2.5)); +#11935 = LINE('',#11936,#11937); +#11936 = CARTESIAN_POINT('',(4.9,-8.,8.881784197001E-16)); +#11937 = VECTOR('',#11938,1.); +#11938 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#11939 = ORIENTED_EDGE('',*,*,#11908,.T.); +#11940 = ORIENTED_EDGE('',*,*,#11509,.T.); +#11941 = ORIENTED_EDGE('',*,*,#11942,.F.); +#11942 = EDGE_CURVE('',#11933,#11502,#11943,.T.); +#11943 = LINE('',#11944,#11945); +#11944 = CARTESIAN_POINT('',(4.9,-8.,-2.5)); +#11945 = VECTOR('',#11946,1.); +#11946 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11947 = PLANE('',#11948); +#11948 = AXIS2_PLACEMENT_3D('',#11949,#11950,#11951); +#11949 = CARTESIAN_POINT('',(4.9,-8.,0.)); +#11950 = DIRECTION('',(-1.232595164408E-32,-1.,1.110223024625E-16)); +#11951 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#11952 = ADVANCED_FACE('',(#11953),#11971,.T.); +#11953 = FACE_BOUND('',#11954,.F.); +#11954 = EDGE_LOOP('',(#11955,#11963,#11969,#11970)); +#11955 = ORIENTED_EDGE('',*,*,#11956,.F.); +#11956 = EDGE_CURVE('',#11957,#11933,#11959,.T.); +#11957 = VERTEX_POINT('',#11958); +#11958 = CARTESIAN_POINT('',(4.9,-7.5,-3.)); +#11959 = LINE('',#11960,#11961); +#11960 = CARTESIAN_POINT('',(4.9,-7.75,-2.75)); +#11961 = VECTOR('',#11962,1.); +#11962 = DIRECTION('',(-7.850462293414E-17,-0.707106781187, + 0.707106781187)); +#11963 = ORIENTED_EDGE('',*,*,#11964,.T.); +#11964 = EDGE_CURVE('',#11957,#11494,#11965,.T.); +#11965 = LINE('',#11966,#11967); +#11966 = CARTESIAN_POINT('',(4.9,-7.5,-3.)); +#11967 = VECTOR('',#11968,1.); +#11968 = DIRECTION('',(-1.,-0.,-1.110223024625E-16)); +#11969 = ORIENTED_EDGE('',*,*,#11501,.T.); +#11970 = ORIENTED_EDGE('',*,*,#11942,.F.); +#11971 = PLANE('',#11972); +#11972 = AXIS2_PLACEMENT_3D('',#11973,#11974,#11975); +#11973 = CARTESIAN_POINT('',(4.9,-7.75,-2.75)); +#11974 = DIRECTION('',(9.043085361258E-17,-0.707106781187, + -0.707106781187)); +#11975 = DIRECTION('',(1.,8.43311858671E-18,1.194554210492E-16)); +#11976 = ADVANCED_FACE('',(#11977),#11988,.T.); +#11977 = FACE_BOUND('',#11978,.T.); +#11978 = EDGE_LOOP('',(#11979,#11985,#11986,#11987)); +#11979 = ORIENTED_EDGE('',*,*,#11980,.F.); +#11980 = EDGE_CURVE('',#11957,#11693,#11981,.T.); +#11981 = LINE('',#11982,#11983); +#11982 = CARTESIAN_POINT('',(4.9,-8.,-3.)); +#11983 = VECTOR('',#11984,1.); +#11984 = DIRECTION('',(1.232595164408E-32,1.,-1.110223024625E-16)); +#11985 = ORIENTED_EDGE('',*,*,#11964,.T.); +#11986 = ORIENTED_EDGE('',*,*,#11493,.T.); +#11987 = ORIENTED_EDGE('',*,*,#11702,.F.); +#11988 = PLANE('',#11989); +#11989 = AXIS2_PLACEMENT_3D('',#11990,#11991,#11992); +#11990 = CARTESIAN_POINT('',(4.9,-8.,-3.)); +#11991 = DIRECTION('',(1.110223024625E-16,-1.232595164408E-32,-1.)); +#11992 = DIRECTION('',(1.110223024625E-16,1.,-5.167288087198E-45)); +#11993 = ADVANCED_FACE('',(#11994),#12012,.F.); +#11994 = FACE_BOUND('',#11995,.F.); +#11995 = EDGE_LOOP('',(#11996,#11997,#11998,#11999,#12000,#12001,#12002, + #12003,#12004,#12005,#12006,#12007,#12008,#12009,#12010,#12011)); +#11996 = ORIENTED_EDGE('',*,*,#11692,.F.); +#11997 = ORIENTED_EDGE('',*,*,#11980,.F.); +#11998 = ORIENTED_EDGE('',*,*,#11956,.T.); +#11999 = ORIENTED_EDGE('',*,*,#11932,.F.); +#12000 = ORIENTED_EDGE('',*,*,#11918,.T.); +#12001 = ORIENTED_EDGE('',*,*,#11894,.T.); +#12002 = ORIENTED_EDGE('',*,*,#11870,.T.); +#12003 = ORIENTED_EDGE('',*,*,#11846,.T.); +#12004 = ORIENTED_EDGE('',*,*,#11644,.T.); +#12005 = ORIENTED_EDGE('',*,*,#11630,.F.); +#12006 = ORIENTED_EDGE('',*,*,#11668,.T.); +#12007 = ORIENTED_EDGE('',*,*,#11822,.T.); +#12008 = ORIENTED_EDGE('',*,*,#11805,.T.); +#12009 = ORIENTED_EDGE('',*,*,#11781,.T.); +#12010 = ORIENTED_EDGE('',*,*,#11757,.T.); +#12011 = ORIENTED_EDGE('',*,*,#11723,.F.); +#12012 = PLANE('',#12013); +#12013 = AXIS2_PLACEMENT_3D('',#12014,#12015,#12016); +#12014 = CARTESIAN_POINT('',(4.9,-8.,-3.)); +#12015 = DIRECTION('',(-1.,0.,-1.110223024625E-16)); +#12016 = DIRECTION('',(1.110223024625E-16,-1.110223024625E-16,-1.)); +#12017 = MANIFOLD_SOLID_BREP('',#12018); +#12018 = CLOSED_SHELL('',(#12019,#12059,#12098,#12137,#12297,#12330, + #12354,#12371,#12395,#12412,#12436,#12460,#12484,#12508,#12540, + #12572,#12600,#12631,#12671,#12695,#12728,#12759,#12799,#12823, + #12856,#12881,#12898,#12915,#12939,#12963,#12982,#13007,#13024, + #13041,#13053,#13070,#13087,#13099,#13108,#13120,#13140,#13165)); +#12019 = ADVANCED_FACE('',(#12020),#12054,.T.); +#12020 = FACE_BOUND('',#12021,.T.); +#12021 = EDGE_LOOP('',(#12022,#12032,#12040,#12048)); +#12022 = ORIENTED_EDGE('',*,*,#12023,.T.); +#12023 = EDGE_CURVE('',#12024,#12026,#12028,.T.); +#12024 = VERTEX_POINT('',#12025); +#12025 = CARTESIAN_POINT('',(-5.,1.,0.)); +#12026 = VERTEX_POINT('',#12027); +#12027 = CARTESIAN_POINT('',(-5.,1.,9.)); +#12028 = LINE('',#12029,#12030); +#12029 = CARTESIAN_POINT('',(-5.,1.,0.)); +#12030 = VECTOR('',#12031,1.); +#12031 = DIRECTION('',(0.,0.,1.)); +#12032 = ORIENTED_EDGE('',*,*,#12033,.T.); +#12033 = EDGE_CURVE('',#12026,#12034,#12036,.T.); +#12034 = VERTEX_POINT('',#12035); +#12035 = CARTESIAN_POINT('',(5.,1.,9.)); +#12036 = LINE('',#12037,#12038); +#12037 = CARTESIAN_POINT('',(-5.,1.,9.)); +#12038 = VECTOR('',#12039,1.); +#12039 = DIRECTION('',(1.,0.,0.)); +#12040 = ORIENTED_EDGE('',*,*,#12041,.F.); +#12041 = EDGE_CURVE('',#12042,#12034,#12044,.T.); +#12042 = VERTEX_POINT('',#12043); +#12043 = CARTESIAN_POINT('',(5.,1.,0.)); +#12044 = LINE('',#12045,#12046); +#12045 = CARTESIAN_POINT('',(5.,1.,0.)); +#12046 = VECTOR('',#12047,1.); +#12047 = DIRECTION('',(0.,0.,1.)); +#12048 = ORIENTED_EDGE('',*,*,#12049,.F.); +#12049 = EDGE_CURVE('',#12024,#12042,#12050,.T.); +#12050 = LINE('',#12051,#12052); +#12051 = CARTESIAN_POINT('',(-5.,1.,0.)); +#12052 = VECTOR('',#12053,1.); +#12053 = DIRECTION('',(1.,0.,0.)); +#12054 = PLANE('',#12055); +#12055 = AXIS2_PLACEMENT_3D('',#12056,#12057,#12058); +#12056 = CARTESIAN_POINT('',(-5.,1.,0.)); +#12057 = DIRECTION('',(0.,1.,0.)); +#12058 = DIRECTION('',(1.,0.,0.)); +#12059 = ADVANCED_FACE('',(#12060),#12093,.T.); +#12060 = FACE_BOUND('',#12061,.T.); +#12061 = EDGE_LOOP('',(#12062,#12070,#12078,#12086,#12092)); +#12062 = ORIENTED_EDGE('',*,*,#12063,.F.); +#12063 = EDGE_CURVE('',#12064,#12024,#12066,.T.); +#12064 = VERTEX_POINT('',#12065); +#12065 = CARTESIAN_POINT('',(-5.,-2.,0.)); +#12066 = LINE('',#12067,#12068); +#12067 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#12068 = VECTOR('',#12069,1.); +#12069 = DIRECTION('',(0.,1.,0.)); +#12070 = ORIENTED_EDGE('',*,*,#12071,.F.); +#12071 = EDGE_CURVE('',#12072,#12064,#12074,.T.); +#12072 = VERTEX_POINT('',#12073); +#12073 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#12074 = LINE('',#12075,#12076); +#12075 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#12076 = VECTOR('',#12077,1.); +#12077 = DIRECTION('',(0.,0.,-1.)); +#12078 = ORIENTED_EDGE('',*,*,#12079,.F.); +#12079 = EDGE_CURVE('',#12080,#12072,#12082,.T.); +#12080 = VERTEX_POINT('',#12081); +#12081 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#12082 = LINE('',#12083,#12084); +#12083 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#12084 = VECTOR('',#12085,1.); +#12085 = DIRECTION('',(-0.,-0.,-1.)); +#12086 = ORIENTED_EDGE('',*,*,#12087,.T.); +#12087 = EDGE_CURVE('',#12080,#12026,#12088,.T.); +#12088 = LINE('',#12089,#12090); +#12089 = CARTESIAN_POINT('',(-5.,-12.,9.)); +#12090 = VECTOR('',#12091,1.); +#12091 = DIRECTION('',(0.,1.,0.)); +#12092 = ORIENTED_EDGE('',*,*,#12023,.F.); +#12093 = PLANE('',#12094); +#12094 = AXIS2_PLACEMENT_3D('',#12095,#12096,#12097); +#12095 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#12096 = DIRECTION('',(-1.,0.,0.)); +#12097 = DIRECTION('',(0.,1.,0.)); +#12098 = ADVANCED_FACE('',(#12099),#12132,.T.); +#12099 = FACE_BOUND('',#12100,.T.); +#12100 = EDGE_LOOP('',(#12101,#12109,#12110,#12118,#12126)); +#12101 = ORIENTED_EDGE('',*,*,#12102,.F.); +#12102 = EDGE_CURVE('',#12042,#12103,#12105,.T.); +#12103 = VERTEX_POINT('',#12104); +#12104 = CARTESIAN_POINT('',(5.,-2.,0.)); +#12105 = LINE('',#12106,#12107); +#12106 = CARTESIAN_POINT('',(5.,1.,0.)); +#12107 = VECTOR('',#12108,1.); +#12108 = DIRECTION('',(0.,-1.,0.)); +#12109 = ORIENTED_EDGE('',*,*,#12041,.T.); +#12110 = ORIENTED_EDGE('',*,*,#12111,.T.); +#12111 = EDGE_CURVE('',#12034,#12112,#12114,.T.); +#12112 = VERTEX_POINT('',#12113); +#12113 = CARTESIAN_POINT('',(5.,-2.,9.)); +#12114 = LINE('',#12115,#12116); +#12115 = CARTESIAN_POINT('',(5.,1.,9.)); +#12116 = VECTOR('',#12117,1.); +#12117 = DIRECTION('',(0.,-1.,0.)); +#12118 = ORIENTED_EDGE('',*,*,#12119,.T.); +#12119 = EDGE_CURVE('',#12112,#12120,#12122,.T.); +#12120 = VERTEX_POINT('',#12121); +#12121 = CARTESIAN_POINT('',(5.,-2.,8.5)); +#12122 = LINE('',#12123,#12124); +#12123 = CARTESIAN_POINT('',(5.,-2.,9.)); +#12124 = VECTOR('',#12125,1.); +#12125 = DIRECTION('',(-0.,-0.,-1.)); +#12126 = ORIENTED_EDGE('',*,*,#12127,.F.); +#12127 = EDGE_CURVE('',#12103,#12120,#12128,.T.); +#12128 = LINE('',#12129,#12130); +#12129 = CARTESIAN_POINT('',(5.,-2.,0.)); +#12130 = VECTOR('',#12131,1.); +#12131 = DIRECTION('',(0.,0.,1.)); +#12132 = PLANE('',#12133); +#12133 = AXIS2_PLACEMENT_3D('',#12134,#12135,#12136); +#12134 = CARTESIAN_POINT('',(5.,1.,0.)); +#12135 = DIRECTION('',(1.,0.,0.)); +#12136 = DIRECTION('',(0.,-1.,0.)); +#12137 = ADVANCED_FACE('',(#12138,#12213,#12247,#12281),#12292,.F.); +#12138 = FACE_BOUND('',#12139,.F.); +#12139 = EDGE_LOOP('',(#12140,#12141,#12142,#12150,#12158,#12166,#12174, + #12182,#12190,#12198,#12206,#12212)); +#12140 = ORIENTED_EDGE('',*,*,#12049,.F.); +#12141 = ORIENTED_EDGE('',*,*,#12063,.F.); +#12142 = ORIENTED_EDGE('',*,*,#12143,.T.); +#12143 = EDGE_CURVE('',#12064,#12144,#12146,.T.); +#12144 = VERTEX_POINT('',#12145); +#12145 = CARTESIAN_POINT('',(-4.5,-2.,0.)); +#12146 = LINE('',#12147,#12148); +#12147 = CARTESIAN_POINT('',(-5.,-2.,0.)); +#12148 = VECTOR('',#12149,1.); +#12149 = DIRECTION('',(1.,0.,0.)); +#12150 = ORIENTED_EDGE('',*,*,#12151,.T.); +#12151 = EDGE_CURVE('',#12144,#12152,#12154,.T.); +#12152 = VERTEX_POINT('',#12153); +#12153 = CARTESIAN_POINT('',(-4.5,-11.,0.)); +#12154 = LINE('',#12155,#12156); +#12155 = CARTESIAN_POINT('',(-4.5,-2.,0.)); +#12156 = VECTOR('',#12157,1.); +#12157 = DIRECTION('',(0.,-1.,0.)); +#12158 = ORIENTED_EDGE('',*,*,#12159,.F.); +#12159 = EDGE_CURVE('',#12160,#12152,#12162,.T.); +#12160 = VERTEX_POINT('',#12161); +#12161 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#12162 = LINE('',#12163,#12164); +#12163 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#12164 = VECTOR('',#12165,1.); +#12165 = DIRECTION('',(1.,0.,0.)); +#12166 = ORIENTED_EDGE('',*,*,#12167,.F.); +#12167 = EDGE_CURVE('',#12168,#12160,#12170,.T.); +#12168 = VERTEX_POINT('',#12169); +#12169 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#12170 = LINE('',#12171,#12172); +#12171 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#12172 = VECTOR('',#12173,1.); +#12173 = DIRECTION('',(0.,1.,0.)); +#12174 = ORIENTED_EDGE('',*,*,#12175,.F.); +#12175 = EDGE_CURVE('',#12176,#12168,#12178,.T.); +#12176 = VERTEX_POINT('',#12177); +#12177 = CARTESIAN_POINT('',(5.,-12.,0.)); +#12178 = LINE('',#12179,#12180); +#12179 = CARTESIAN_POINT('',(5.,-12.,0.)); +#12180 = VECTOR('',#12181,1.); +#12181 = DIRECTION('',(-1.,0.,0.)); +#12182 = ORIENTED_EDGE('',*,*,#12183,.F.); +#12183 = EDGE_CURVE('',#12184,#12176,#12186,.T.); +#12184 = VERTEX_POINT('',#12185); +#12185 = CARTESIAN_POINT('',(5.,-11.,0.)); +#12186 = LINE('',#12187,#12188); +#12187 = CARTESIAN_POINT('',(5.,1.,0.)); +#12188 = VECTOR('',#12189,1.); +#12189 = DIRECTION('',(0.,-1.,0.)); +#12190 = ORIENTED_EDGE('',*,*,#12191,.T.); +#12191 = EDGE_CURVE('',#12184,#12192,#12194,.T.); +#12192 = VERTEX_POINT('',#12193); +#12193 = CARTESIAN_POINT('',(4.5,-11.,0.)); +#12194 = LINE('',#12195,#12196); +#12195 = CARTESIAN_POINT('',(5.,-11.,0.)); +#12196 = VECTOR('',#12197,1.); +#12197 = DIRECTION('',(-1.,-0.,-0.)); +#12198 = ORIENTED_EDGE('',*,*,#12199,.T.); +#12199 = EDGE_CURVE('',#12192,#12200,#12202,.T.); +#12200 = VERTEX_POINT('',#12201); +#12201 = CARTESIAN_POINT('',(4.5,-2.,0.)); +#12202 = LINE('',#12203,#12204); +#12203 = CARTESIAN_POINT('',(4.5,-11.,0.)); +#12204 = VECTOR('',#12205,1.); +#12205 = DIRECTION('',(0.,1.,0.)); +#12206 = ORIENTED_EDGE('',*,*,#12207,.F.); +#12207 = EDGE_CURVE('',#12103,#12200,#12208,.T.); +#12208 = LINE('',#12209,#12210); +#12209 = CARTESIAN_POINT('',(5.,-2.,0.)); +#12210 = VECTOR('',#12211,1.); +#12211 = DIRECTION('',(-1.,-0.,-0.)); +#12212 = ORIENTED_EDGE('',*,*,#12102,.F.); +#12213 = FACE_BOUND('',#12214,.F.); +#12214 = EDGE_LOOP('',(#12215,#12225,#12233,#12241)); +#12215 = ORIENTED_EDGE('',*,*,#12216,.F.); +#12216 = EDGE_CURVE('',#12217,#12219,#12221,.T.); +#12217 = VERTEX_POINT('',#12218); +#12218 = CARTESIAN_POINT('',(1.25,-0.15,0.)); +#12219 = VERTEX_POINT('',#12220); +#12220 = CARTESIAN_POINT('',(1.25,0.15,-9.992007221626E-17)); +#12221 = LINE('',#12222,#12223); +#12222 = CARTESIAN_POINT('',(1.25,-0.15,0.)); +#12223 = VECTOR('',#12224,1.); +#12224 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#12225 = ORIENTED_EDGE('',*,*,#12226,.T.); +#12226 = EDGE_CURVE('',#12217,#12227,#12229,.T.); +#12227 = VERTEX_POINT('',#12228); +#12228 = CARTESIAN_POINT('',(-1.25,-0.15,0.)); +#12229 = LINE('',#12230,#12231); +#12230 = CARTESIAN_POINT('',(1.25,-0.15,0.)); +#12231 = VECTOR('',#12232,1.); +#12232 = DIRECTION('',(-1.,0.,0.)); +#12233 = ORIENTED_EDGE('',*,*,#12234,.T.); +#12234 = EDGE_CURVE('',#12227,#12235,#12237,.T.); +#12235 = VERTEX_POINT('',#12236); +#12236 = CARTESIAN_POINT('',(-1.25,0.15,-9.992007221626E-17)); +#12237 = LINE('',#12238,#12239); +#12238 = CARTESIAN_POINT('',(-1.25,-0.15,0.)); +#12239 = VECTOR('',#12240,1.); +#12240 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#12241 = ORIENTED_EDGE('',*,*,#12242,.F.); +#12242 = EDGE_CURVE('',#12219,#12235,#12243,.T.); +#12243 = LINE('',#12244,#12245); +#12244 = CARTESIAN_POINT('',(1.25,0.15,-9.992007221626E-17)); +#12245 = VECTOR('',#12246,1.); +#12246 = DIRECTION('',(-1.,0.,0.)); +#12247 = FACE_BOUND('',#12248,.F.); +#12248 = EDGE_LOOP('',(#12249,#12259,#12267,#12275)); +#12249 = ORIENTED_EDGE('',*,*,#12250,.F.); +#12250 = EDGE_CURVE('',#12251,#12253,#12255,.T.); +#12251 = VERTEX_POINT('',#12252); +#12252 = CARTESIAN_POINT('',(0.9,-6.15,0.)); +#12253 = VERTEX_POINT('',#12254); +#12254 = CARTESIAN_POINT('',(0.9,-5.85,-9.992007221626E-17)); +#12255 = LINE('',#12256,#12257); +#12256 = CARTESIAN_POINT('',(0.9,-6.15,0.)); +#12257 = VECTOR('',#12258,1.); +#12258 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#12259 = ORIENTED_EDGE('',*,*,#12260,.T.); +#12260 = EDGE_CURVE('',#12251,#12261,#12263,.T.); +#12261 = VERTEX_POINT('',#12262); +#12262 = CARTESIAN_POINT('',(-0.9,-6.15,0.)); +#12263 = LINE('',#12264,#12265); +#12264 = CARTESIAN_POINT('',(0.9,-6.15,0.)); +#12265 = VECTOR('',#12266,1.); +#12266 = DIRECTION('',(-1.,0.,0.)); +#12267 = ORIENTED_EDGE('',*,*,#12268,.T.); +#12268 = EDGE_CURVE('',#12261,#12269,#12271,.T.); +#12269 = VERTEX_POINT('',#12270); +#12270 = CARTESIAN_POINT('',(-0.9,-5.85,-9.992007221626E-17)); +#12271 = LINE('',#12272,#12273); +#12272 = CARTESIAN_POINT('',(-0.9,-6.15,0.)); +#12273 = VECTOR('',#12274,1.); +#12274 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#12275 = ORIENTED_EDGE('',*,*,#12276,.F.); +#12276 = EDGE_CURVE('',#12253,#12269,#12277,.T.); +#12277 = LINE('',#12278,#12279); +#12278 = CARTESIAN_POINT('',(0.9,-5.85,-9.992007221626E-17)); +#12279 = VECTOR('',#12280,1.); +#12280 = DIRECTION('',(-1.,0.,0.)); +#12281 = FACE_BOUND('',#12282,.F.); +#12282 = EDGE_LOOP('',(#12283)); +#12283 = ORIENTED_EDGE('',*,*,#12284,.F.); +#12284 = EDGE_CURVE('',#12285,#12285,#12287,.T.); +#12285 = VERTEX_POINT('',#12286); +#12286 = CARTESIAN_POINT('',(0.75,-9.,0.)); +#12287 = CIRCLE('',#12288,0.75); +#12288 = AXIS2_PLACEMENT_3D('',#12289,#12290,#12291); +#12289 = CARTESIAN_POINT('',(0.,-9.,0.)); +#12290 = DIRECTION('',(0.,0.,1.)); +#12291 = DIRECTION('',(1.,0.,-0.)); +#12292 = PLANE('',#12293); +#12293 = AXIS2_PLACEMENT_3D('',#12294,#12295,#12296); +#12294 = CARTESIAN_POINT('',(-5.,1.,0.)); +#12295 = DIRECTION('',(0.,0.,1.)); +#12296 = DIRECTION('',(1.,0.,-0.)); +#12297 = ADVANCED_FACE('',(#12298),#12325,.T.); +#12298 = FACE_BOUND('',#12299,.T.); +#12299 = EDGE_LOOP('',(#12300,#12301,#12302,#12310,#12318,#12324)); +#12300 = ORIENTED_EDGE('',*,*,#12033,.F.); +#12301 = ORIENTED_EDGE('',*,*,#12087,.F.); +#12302 = ORIENTED_EDGE('',*,*,#12303,.T.); +#12303 = EDGE_CURVE('',#12080,#12304,#12306,.T.); +#12304 = VERTEX_POINT('',#12305); +#12305 = CARTESIAN_POINT('',(-4.5,-2.,9.)); +#12306 = LINE('',#12307,#12308); +#12307 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#12308 = VECTOR('',#12309,1.); +#12309 = DIRECTION('',(1.,0.,0.)); +#12310 = ORIENTED_EDGE('',*,*,#12311,.T.); +#12311 = EDGE_CURVE('',#12304,#12312,#12314,.T.); +#12312 = VERTEX_POINT('',#12313); +#12313 = CARTESIAN_POINT('',(4.5,-2.,9.)); +#12314 = LINE('',#12315,#12316); +#12315 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#12316 = VECTOR('',#12317,1.); +#12317 = DIRECTION('',(1.,0.,0.)); +#12318 = ORIENTED_EDGE('',*,*,#12319,.F.); +#12319 = EDGE_CURVE('',#12112,#12312,#12320,.T.); +#12320 = LINE('',#12321,#12322); +#12321 = CARTESIAN_POINT('',(5.,-2.,9.)); +#12322 = VECTOR('',#12323,1.); +#12323 = DIRECTION('',(-1.,-0.,-0.)); +#12324 = ORIENTED_EDGE('',*,*,#12111,.F.); +#12325 = PLANE('',#12326); +#12326 = AXIS2_PLACEMENT_3D('',#12327,#12328,#12329); +#12327 = CARTESIAN_POINT('',(-5.,1.,9.)); +#12328 = DIRECTION('',(0.,0.,1.)); +#12329 = DIRECTION('',(1.,0.,-0.)); +#12330 = ADVANCED_FACE('',(#12331),#12349,.F.); +#12331 = FACE_BOUND('',#12332,.F.); +#12332 = EDGE_LOOP('',(#12333,#12334,#12342,#12348)); +#12333 = ORIENTED_EDGE('',*,*,#12071,.F.); +#12334 = ORIENTED_EDGE('',*,*,#12335,.T.); +#12335 = EDGE_CURVE('',#12072,#12336,#12338,.T.); +#12336 = VERTEX_POINT('',#12337); +#12337 = CARTESIAN_POINT('',(-4.5,-2.,8.5)); +#12338 = LINE('',#12339,#12340); +#12339 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#12340 = VECTOR('',#12341,1.); +#12341 = DIRECTION('',(1.,0.,0.)); +#12342 = ORIENTED_EDGE('',*,*,#12343,.T.); +#12343 = EDGE_CURVE('',#12336,#12144,#12344,.T.); +#12344 = LINE('',#12345,#12346); +#12345 = CARTESIAN_POINT('',(-4.5,-2.,9.)); +#12346 = VECTOR('',#12347,1.); +#12347 = DIRECTION('',(0.,0.,-1.)); +#12348 = ORIENTED_EDGE('',*,*,#12143,.F.); +#12349 = PLANE('',#12350); +#12350 = AXIS2_PLACEMENT_3D('',#12351,#12352,#12353); +#12351 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#12352 = DIRECTION('',(0.,1.,0.)); +#12353 = DIRECTION('',(0.,0.,-1.)); +#12354 = ADVANCED_FACE('',(#12355),#12366,.F.); +#12355 = FACE_BOUND('',#12356,.F.); +#12356 = EDGE_LOOP('',(#12357,#12358,#12359,#12365)); +#12357 = ORIENTED_EDGE('',*,*,#12079,.F.); +#12358 = ORIENTED_EDGE('',*,*,#12303,.T.); +#12359 = ORIENTED_EDGE('',*,*,#12360,.T.); +#12360 = EDGE_CURVE('',#12304,#12336,#12361,.T.); +#12361 = LINE('',#12362,#12363); +#12362 = CARTESIAN_POINT('',(-4.5,-2.,9.)); +#12363 = VECTOR('',#12364,1.); +#12364 = DIRECTION('',(0.,0.,-1.)); +#12365 = ORIENTED_EDGE('',*,*,#12335,.F.); +#12366 = PLANE('',#12367); +#12367 = AXIS2_PLACEMENT_3D('',#12368,#12369,#12370); +#12368 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#12369 = DIRECTION('',(0.,1.,0.)); +#12370 = DIRECTION('',(0.,0.,-1.)); +#12371 = ADVANCED_FACE('',(#12372),#12390,.F.); +#12372 = FACE_BOUND('',#12373,.F.); +#12373 = EDGE_LOOP('',(#12374,#12375,#12376,#12384)); +#12374 = ORIENTED_EDGE('',*,*,#12127,.F.); +#12375 = ORIENTED_EDGE('',*,*,#12207,.T.); +#12376 = ORIENTED_EDGE('',*,*,#12377,.T.); +#12377 = EDGE_CURVE('',#12200,#12378,#12380,.T.); +#12378 = VERTEX_POINT('',#12379); +#12379 = CARTESIAN_POINT('',(4.5,-2.,8.5)); +#12380 = LINE('',#12381,#12382); +#12381 = CARTESIAN_POINT('',(4.5,-2.,0.)); +#12382 = VECTOR('',#12383,1.); +#12383 = DIRECTION('',(0.,0.,1.)); +#12384 = ORIENTED_EDGE('',*,*,#12385,.T.); +#12385 = EDGE_CURVE('',#12378,#12120,#12386,.T.); +#12386 = LINE('',#12387,#12388); +#12387 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#12388 = VECTOR('',#12389,1.); +#12389 = DIRECTION('',(1.,0.,0.)); +#12390 = PLANE('',#12391); +#12391 = AXIS2_PLACEMENT_3D('',#12392,#12393,#12394); +#12392 = CARTESIAN_POINT('',(5.,-2.,0.)); +#12393 = DIRECTION('',(0.,1.,0.)); +#12394 = DIRECTION('',(0.,-0.,1.)); +#12395 = ADVANCED_FACE('',(#12396),#12407,.F.); +#12396 = FACE_BOUND('',#12397,.F.); +#12397 = EDGE_LOOP('',(#12398,#12399,#12400,#12406)); +#12398 = ORIENTED_EDGE('',*,*,#12119,.T.); +#12399 = ORIENTED_EDGE('',*,*,#12385,.F.); +#12400 = ORIENTED_EDGE('',*,*,#12401,.T.); +#12401 = EDGE_CURVE('',#12378,#12312,#12402,.T.); +#12402 = LINE('',#12403,#12404); +#12403 = CARTESIAN_POINT('',(4.5,-2.,0.)); +#12404 = VECTOR('',#12405,1.); +#12405 = DIRECTION('',(0.,0.,1.)); +#12406 = ORIENTED_EDGE('',*,*,#12319,.F.); +#12407 = PLANE('',#12408); +#12408 = AXIS2_PLACEMENT_3D('',#12409,#12410,#12411); +#12409 = CARTESIAN_POINT('',(5.,-2.,0.)); +#12410 = DIRECTION('',(0.,1.,0.)); +#12411 = DIRECTION('',(0.,-0.,1.)); +#12412 = ADVANCED_FACE('',(#12413),#12431,.F.); +#12413 = FACE_BOUND('',#12414,.F.); +#12414 = EDGE_LOOP('',(#12415,#12416,#12417,#12425)); +#12415 = ORIENTED_EDGE('',*,*,#12151,.F.); +#12416 = ORIENTED_EDGE('',*,*,#12343,.F.); +#12417 = ORIENTED_EDGE('',*,*,#12418,.T.); +#12418 = EDGE_CURVE('',#12336,#12419,#12421,.T.); +#12419 = VERTEX_POINT('',#12420); +#12420 = CARTESIAN_POINT('',(-4.5,-11.,8.5)); +#12421 = LINE('',#12422,#12423); +#12422 = CARTESIAN_POINT('',(-4.5,-2.,8.5)); +#12423 = VECTOR('',#12424,1.); +#12424 = DIRECTION('',(0.,-1.,0.)); +#12425 = ORIENTED_EDGE('',*,*,#12426,.F.); +#12426 = EDGE_CURVE('',#12152,#12419,#12427,.T.); +#12427 = LINE('',#12428,#12429); +#12428 = CARTESIAN_POINT('',(-4.5,-11.,0.)); +#12429 = VECTOR('',#12430,1.); +#12430 = DIRECTION('',(0.,0.,1.)); +#12431 = PLANE('',#12432); +#12432 = AXIS2_PLACEMENT_3D('',#12433,#12434,#12435); +#12433 = CARTESIAN_POINT('',(-4.5,-2.,0.)); +#12434 = DIRECTION('',(1.,0.,0.)); +#12435 = DIRECTION('',(0.,0.,1.)); +#12436 = ADVANCED_FACE('',(#12437),#12455,.F.); +#12437 = FACE_BOUND('',#12438,.F.); +#12438 = EDGE_LOOP('',(#12439,#12440,#12448,#12454)); +#12439 = ORIENTED_EDGE('',*,*,#12199,.F.); +#12440 = ORIENTED_EDGE('',*,*,#12441,.F.); +#12441 = EDGE_CURVE('',#12442,#12192,#12444,.T.); +#12442 = VERTEX_POINT('',#12443); +#12443 = CARTESIAN_POINT('',(4.5,-11.,8.5)); +#12444 = LINE('',#12445,#12446); +#12445 = CARTESIAN_POINT('',(4.5,-11.,9.)); +#12446 = VECTOR('',#12447,1.); +#12447 = DIRECTION('',(0.,0.,-1.)); +#12448 = ORIENTED_EDGE('',*,*,#12449,.T.); +#12449 = EDGE_CURVE('',#12442,#12378,#12450,.T.); +#12450 = LINE('',#12451,#12452); +#12451 = CARTESIAN_POINT('',(4.5,-6.5,8.5)); +#12452 = VECTOR('',#12453,1.); +#12453 = DIRECTION('',(0.,1.,0.)); +#12454 = ORIENTED_EDGE('',*,*,#12377,.F.); +#12455 = PLANE('',#12456); +#12456 = AXIS2_PLACEMENT_3D('',#12457,#12458,#12459); +#12457 = CARTESIAN_POINT('',(4.5,-11.,0.)); +#12458 = DIRECTION('',(-1.,0.,0.)); +#12459 = DIRECTION('',(0.,0.,-1.)); +#12460 = ADVANCED_FACE('',(#12461),#12479,.F.); +#12461 = FACE_BOUND('',#12462,.F.); +#12462 = EDGE_LOOP('',(#12463,#12471,#12472,#12473)); +#12463 = ORIENTED_EDGE('',*,*,#12464,.F.); +#12464 = EDGE_CURVE('',#12160,#12465,#12467,.T.); +#12465 = VERTEX_POINT('',#12466); +#12466 = CARTESIAN_POINT('',(-5.,-11.,8.5)); +#12467 = LINE('',#12468,#12469); +#12468 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#12469 = VECTOR('',#12470,1.); +#12470 = DIRECTION('',(0.,0.,1.)); +#12471 = ORIENTED_EDGE('',*,*,#12159,.T.); +#12472 = ORIENTED_EDGE('',*,*,#12426,.T.); +#12473 = ORIENTED_EDGE('',*,*,#12474,.T.); +#12474 = EDGE_CURVE('',#12419,#12465,#12475,.T.); +#12475 = LINE('',#12476,#12477); +#12476 = CARTESIAN_POINT('',(5.,-11.,8.5)); +#12477 = VECTOR('',#12478,1.); +#12478 = DIRECTION('',(-1.,0.,0.)); +#12479 = PLANE('',#12480); +#12480 = AXIS2_PLACEMENT_3D('',#12481,#12482,#12483); +#12481 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#12482 = DIRECTION('',(0.,-1.,0.)); +#12483 = DIRECTION('',(0.,0.,1.)); +#12484 = ADVANCED_FACE('',(#12485),#12503,.F.); +#12485 = FACE_BOUND('',#12486,.F.); +#12486 = EDGE_LOOP('',(#12487,#12495,#12501,#12502)); +#12487 = ORIENTED_EDGE('',*,*,#12488,.F.); +#12488 = EDGE_CURVE('',#12489,#12184,#12491,.T.); +#12489 = VERTEX_POINT('',#12490); +#12490 = CARTESIAN_POINT('',(5.,-11.,8.5)); +#12491 = LINE('',#12492,#12493); +#12492 = CARTESIAN_POINT('',(5.,-11.,9.)); +#12493 = VECTOR('',#12494,1.); +#12494 = DIRECTION('',(0.,0.,-1.)); +#12495 = ORIENTED_EDGE('',*,*,#12496,.T.); +#12496 = EDGE_CURVE('',#12489,#12442,#12497,.T.); +#12497 = LINE('',#12498,#12499); +#12498 = CARTESIAN_POINT('',(5.,-11.,8.5)); +#12499 = VECTOR('',#12500,1.); +#12500 = DIRECTION('',(-1.,0.,0.)); +#12501 = ORIENTED_EDGE('',*,*,#12441,.T.); +#12502 = ORIENTED_EDGE('',*,*,#12191,.F.); +#12503 = PLANE('',#12504); +#12504 = AXIS2_PLACEMENT_3D('',#12505,#12506,#12507); +#12505 = CARTESIAN_POINT('',(5.,-11.,9.)); +#12506 = DIRECTION('',(0.,-1.,0.)); +#12507 = DIRECTION('',(0.,0.,-1.)); +#12508 = ADVANCED_FACE('',(#12509),#12535,.T.); +#12509 = FACE_BOUND('',#12510,.T.); +#12510 = EDGE_LOOP('',(#12511,#12512,#12520,#12528,#12534)); +#12511 = ORIENTED_EDGE('',*,*,#12167,.F.); +#12512 = ORIENTED_EDGE('',*,*,#12513,.T.); +#12513 = EDGE_CURVE('',#12168,#12514,#12516,.T.); +#12514 = VERTEX_POINT('',#12515); +#12515 = CARTESIAN_POINT('',(-5.,-12.,9.)); +#12516 = LINE('',#12517,#12518); +#12517 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#12518 = VECTOR('',#12519,1.); +#12519 = DIRECTION('',(0.,0.,1.)); +#12520 = ORIENTED_EDGE('',*,*,#12521,.T.); +#12521 = EDGE_CURVE('',#12514,#12522,#12524,.T.); +#12522 = VERTEX_POINT('',#12523); +#12523 = CARTESIAN_POINT('',(-5.,-11.,9.)); +#12524 = LINE('',#12525,#12526); +#12525 = CARTESIAN_POINT('',(-5.,-12.,9.)); +#12526 = VECTOR('',#12527,1.); +#12527 = DIRECTION('',(0.,1.,0.)); +#12528 = ORIENTED_EDGE('',*,*,#12529,.T.); +#12529 = EDGE_CURVE('',#12522,#12465,#12530,.T.); +#12530 = LINE('',#12531,#12532); +#12531 = CARTESIAN_POINT('',(-5.,-11.,9.)); +#12532 = VECTOR('',#12533,1.); +#12533 = DIRECTION('',(-0.,-0.,-1.)); +#12534 = ORIENTED_EDGE('',*,*,#12464,.F.); +#12535 = PLANE('',#12536); +#12536 = AXIS2_PLACEMENT_3D('',#12537,#12538,#12539); +#12537 = CARTESIAN_POINT('',(-5.,-12.,0.)); +#12538 = DIRECTION('',(-1.,0.,0.)); +#12539 = DIRECTION('',(0.,1.,0.)); +#12540 = ADVANCED_FACE('',(#12541),#12567,.T.); +#12541 = FACE_BOUND('',#12542,.T.); +#12542 = EDGE_LOOP('',(#12543,#12544,#12545,#12553,#12561)); +#12543 = ORIENTED_EDGE('',*,*,#12183,.F.); +#12544 = ORIENTED_EDGE('',*,*,#12488,.F.); +#12545 = ORIENTED_EDGE('',*,*,#12546,.F.); +#12546 = EDGE_CURVE('',#12547,#12489,#12549,.T.); +#12547 = VERTEX_POINT('',#12548); +#12548 = CARTESIAN_POINT('',(5.,-11.,9.)); +#12549 = LINE('',#12550,#12551); +#12550 = CARTESIAN_POINT('',(5.,-11.,9.)); +#12551 = VECTOR('',#12552,1.); +#12552 = DIRECTION('',(-0.,-0.,-1.)); +#12553 = ORIENTED_EDGE('',*,*,#12554,.T.); +#12554 = EDGE_CURVE('',#12547,#12555,#12557,.T.); +#12555 = VERTEX_POINT('',#12556); +#12556 = CARTESIAN_POINT('',(5.,-12.,9.)); +#12557 = LINE('',#12558,#12559); +#12558 = CARTESIAN_POINT('',(5.,1.,9.)); +#12559 = VECTOR('',#12560,1.); +#12560 = DIRECTION('',(0.,-1.,0.)); +#12561 = ORIENTED_EDGE('',*,*,#12562,.F.); +#12562 = EDGE_CURVE('',#12176,#12555,#12563,.T.); +#12563 = LINE('',#12564,#12565); +#12564 = CARTESIAN_POINT('',(5.,-12.,0.)); +#12565 = VECTOR('',#12566,1.); +#12566 = DIRECTION('',(0.,0.,1.)); +#12567 = PLANE('',#12568); +#12568 = AXIS2_PLACEMENT_3D('',#12569,#12570,#12571); +#12569 = CARTESIAN_POINT('',(5.,1.,0.)); +#12570 = DIRECTION('',(1.,0.,0.)); +#12571 = DIRECTION('',(0.,-1.,0.)); +#12572 = ADVANCED_FACE('',(#12573,#12584),#12595,.T.); +#12573 = FACE_BOUND('',#12574,.T.); +#12574 = EDGE_LOOP('',(#12575,#12576,#12582,#12583)); +#12575 = ORIENTED_EDGE('',*,*,#12562,.T.); +#12576 = ORIENTED_EDGE('',*,*,#12577,.T.); +#12577 = EDGE_CURVE('',#12555,#12514,#12578,.T.); +#12578 = LINE('',#12579,#12580); +#12579 = CARTESIAN_POINT('',(5.,-12.,9.)); +#12580 = VECTOR('',#12581,1.); +#12581 = DIRECTION('',(-1.,0.,0.)); +#12582 = ORIENTED_EDGE('',*,*,#12513,.F.); +#12583 = ORIENTED_EDGE('',*,*,#12175,.F.); +#12584 = FACE_BOUND('',#12585,.T.); +#12585 = EDGE_LOOP('',(#12586)); +#12586 = ORIENTED_EDGE('',*,*,#12587,.F.); +#12587 = EDGE_CURVE('',#12588,#12588,#12590,.T.); +#12588 = VERTEX_POINT('',#12589); +#12589 = CARTESIAN_POINT('',(3.25,-12.,5.)); +#12590 = CIRCLE('',#12591,3.25); +#12591 = AXIS2_PLACEMENT_3D('',#12592,#12593,#12594); +#12592 = CARTESIAN_POINT('',(0.,-12.,5.)); +#12593 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#12594 = DIRECTION('',(1.,0.,0.)); +#12595 = PLANE('',#12596); +#12596 = AXIS2_PLACEMENT_3D('',#12597,#12598,#12599); +#12597 = CARTESIAN_POINT('',(5.,-12.,0.)); +#12598 = DIRECTION('',(0.,-1.,0.)); +#12599 = DIRECTION('',(-1.,0.,0.)); +#12600 = ADVANCED_FACE('',(#12601),#12626,.T.); +#12601 = FACE_BOUND('',#12602,.T.); +#12602 = EDGE_LOOP('',(#12603,#12611,#12619,#12625)); +#12603 = ORIENTED_EDGE('',*,*,#12604,.F.); +#12604 = EDGE_CURVE('',#12605,#12217,#12607,.T.); +#12605 = VERTEX_POINT('',#12606); +#12606 = CARTESIAN_POINT('',(1.25,-0.15,-2.3)); +#12607 = LINE('',#12608,#12609); +#12608 = CARTESIAN_POINT('',(1.25,-0.15,-3.)); +#12609 = VECTOR('',#12610,1.); +#12610 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#12611 = ORIENTED_EDGE('',*,*,#12612,.T.); +#12612 = EDGE_CURVE('',#12605,#12613,#12615,.T.); +#12613 = VERTEX_POINT('',#12614); +#12614 = CARTESIAN_POINT('',(1.25,0.15,-2.3)); +#12615 = LINE('',#12616,#12617); +#12616 = CARTESIAN_POINT('',(1.25,-0.15,-2.3)); +#12617 = VECTOR('',#12618,1.); +#12618 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#12619 = ORIENTED_EDGE('',*,*,#12620,.T.); +#12620 = EDGE_CURVE('',#12613,#12219,#12621,.T.); +#12621 = LINE('',#12622,#12623); +#12622 = CARTESIAN_POINT('',(1.25,0.15,-3.)); +#12623 = VECTOR('',#12624,1.); +#12624 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#12625 = ORIENTED_EDGE('',*,*,#12216,.F.); +#12626 = PLANE('',#12627); +#12627 = AXIS2_PLACEMENT_3D('',#12628,#12629,#12630); +#12628 = CARTESIAN_POINT('',(1.25,-0.15,-3.)); +#12629 = DIRECTION('',(1.,0.,0.)); +#12630 = DIRECTION('',(-0.,3.330669073875E-16,1.)); +#12631 = ADVANCED_FACE('',(#12632),#12666,.T.); +#12632 = FACE_BOUND('',#12633,.T.); +#12633 = EDGE_LOOP('',(#12634,#12644,#12652,#12658,#12659,#12660)); +#12634 = ORIENTED_EDGE('',*,*,#12635,.F.); +#12635 = EDGE_CURVE('',#12636,#12638,#12640,.T.); +#12636 = VERTEX_POINT('',#12637); +#12637 = CARTESIAN_POINT('',(-0.55,0.15,-3.)); +#12638 = VERTEX_POINT('',#12639); +#12639 = CARTESIAN_POINT('',(0.55,0.15,-3.)); +#12640 = LINE('',#12641,#12642); +#12641 = CARTESIAN_POINT('',(-1.25,0.15,-3.)); +#12642 = VECTOR('',#12643,1.); +#12643 = DIRECTION('',(1.,0.,0.)); +#12644 = ORIENTED_EDGE('',*,*,#12645,.T.); +#12645 = EDGE_CURVE('',#12636,#12646,#12648,.T.); +#12646 = VERTEX_POINT('',#12647); +#12647 = CARTESIAN_POINT('',(-1.25,0.15,-2.3)); +#12648 = LINE('',#12649,#12650); +#12649 = CARTESIAN_POINT('',(-0.9,0.15,-2.65)); +#12650 = VECTOR('',#12651,1.); +#12651 = DIRECTION('',(-0.707106781187,2.355138688024E-16,0.707106781187 + )); +#12652 = ORIENTED_EDGE('',*,*,#12653,.F.); +#12653 = EDGE_CURVE('',#12235,#12646,#12654,.T.); +#12654 = LINE('',#12655,#12656); +#12655 = CARTESIAN_POINT('',(-1.25,0.15,-9.992007221626E-17)); +#12656 = VECTOR('',#12657,1.); +#12657 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#12658 = ORIENTED_EDGE('',*,*,#12242,.F.); +#12659 = ORIENTED_EDGE('',*,*,#12620,.F.); +#12660 = ORIENTED_EDGE('',*,*,#12661,.F.); +#12661 = EDGE_CURVE('',#12638,#12613,#12662,.T.); +#12662 = LINE('',#12663,#12664); +#12663 = CARTESIAN_POINT('',(0.275,0.15,-3.275)); +#12664 = VECTOR('',#12665,1.); +#12665 = DIRECTION('',(0.707106781187,2.355138688024E-16,0.707106781187) + ); +#12666 = PLANE('',#12667); +#12667 = AXIS2_PLACEMENT_3D('',#12668,#12669,#12670); +#12668 = CARTESIAN_POINT('',(-1.25,0.15,-3.)); +#12669 = DIRECTION('',(0.,1.,-3.330669073875E-16)); +#12670 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#12671 = ADVANCED_FACE('',(#12672),#12690,.T.); +#12672 = FACE_BOUND('',#12673,.T.); +#12673 = EDGE_LOOP('',(#12674,#12682,#12683,#12684)); +#12674 = ORIENTED_EDGE('',*,*,#12675,.F.); +#12675 = EDGE_CURVE('',#12227,#12676,#12678,.T.); +#12676 = VERTEX_POINT('',#12677); +#12677 = CARTESIAN_POINT('',(-1.25,-0.15,-2.3)); +#12678 = LINE('',#12679,#12680); +#12679 = CARTESIAN_POINT('',(-1.25,-0.15,0.)); +#12680 = VECTOR('',#12681,1.); +#12681 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#12682 = ORIENTED_EDGE('',*,*,#12234,.T.); +#12683 = ORIENTED_EDGE('',*,*,#12653,.T.); +#12684 = ORIENTED_EDGE('',*,*,#12685,.F.); +#12685 = EDGE_CURVE('',#12676,#12646,#12686,.T.); +#12686 = LINE('',#12687,#12688); +#12687 = CARTESIAN_POINT('',(-1.25,-0.15,-2.3)); +#12688 = VECTOR('',#12689,1.); +#12689 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#12690 = PLANE('',#12691); +#12691 = AXIS2_PLACEMENT_3D('',#12692,#12693,#12694); +#12692 = CARTESIAN_POINT('',(-1.25,-0.15,0.)); +#12693 = DIRECTION('',(-1.,0.,0.)); +#12694 = DIRECTION('',(-0.,-3.330669073875E-16,-1.)); +#12695 = ADVANCED_FACE('',(#12696),#12723,.F.); +#12696 = FACE_BOUND('',#12697,.F.); +#12697 = EDGE_LOOP('',(#12698,#12708,#12714,#12715,#12716,#12717)); +#12698 = ORIENTED_EDGE('',*,*,#12699,.F.); +#12699 = EDGE_CURVE('',#12700,#12702,#12704,.T.); +#12700 = VERTEX_POINT('',#12701); +#12701 = CARTESIAN_POINT('',(-0.55,-0.15,-3.)); +#12702 = VERTEX_POINT('',#12703); +#12703 = CARTESIAN_POINT('',(0.55,-0.15,-3.)); +#12704 = LINE('',#12705,#12706); +#12705 = CARTESIAN_POINT('',(-1.25,-0.15,-3.)); +#12706 = VECTOR('',#12707,1.); +#12707 = DIRECTION('',(1.,0.,0.)); +#12708 = ORIENTED_EDGE('',*,*,#12709,.T.); +#12709 = EDGE_CURVE('',#12700,#12676,#12710,.T.); +#12710 = LINE('',#12711,#12712); +#12711 = CARTESIAN_POINT('',(-0.9,-0.15,-2.65)); +#12712 = VECTOR('',#12713,1.); +#12713 = DIRECTION('',(-0.707106781187,2.355138688024E-16,0.707106781187 + )); +#12714 = ORIENTED_EDGE('',*,*,#12675,.F.); +#12715 = ORIENTED_EDGE('',*,*,#12226,.F.); +#12716 = ORIENTED_EDGE('',*,*,#12604,.F.); +#12717 = ORIENTED_EDGE('',*,*,#12718,.F.); +#12718 = EDGE_CURVE('',#12702,#12605,#12719,.T.); +#12719 = LINE('',#12720,#12721); +#12720 = CARTESIAN_POINT('',(0.275,-0.15,-3.275)); +#12721 = VECTOR('',#12722,1.); +#12722 = DIRECTION('',(0.707106781187,2.355138688024E-16,0.707106781187) + ); +#12723 = PLANE('',#12724); +#12724 = AXIS2_PLACEMENT_3D('',#12725,#12726,#12727); +#12725 = CARTESIAN_POINT('',(-1.25,-0.15,-3.)); +#12726 = DIRECTION('',(0.,1.,-3.330669073875E-16)); +#12727 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#12728 = ADVANCED_FACE('',(#12729),#12754,.T.); +#12729 = FACE_BOUND('',#12730,.T.); +#12730 = EDGE_LOOP('',(#12731,#12739,#12747,#12753)); +#12731 = ORIENTED_EDGE('',*,*,#12732,.F.); +#12732 = EDGE_CURVE('',#12733,#12251,#12735,.T.); +#12733 = VERTEX_POINT('',#12734); +#12734 = CARTESIAN_POINT('',(0.9,-6.15,-2.5)); +#12735 = LINE('',#12736,#12737); +#12736 = CARTESIAN_POINT('',(0.9,-6.15,-3.)); +#12737 = VECTOR('',#12738,1.); +#12738 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#12739 = ORIENTED_EDGE('',*,*,#12740,.T.); +#12740 = EDGE_CURVE('',#12733,#12741,#12743,.T.); +#12741 = VERTEX_POINT('',#12742); +#12742 = CARTESIAN_POINT('',(0.9,-5.85,-2.5)); +#12743 = LINE('',#12744,#12745); +#12744 = CARTESIAN_POINT('',(0.9,-6.15,-2.5)); +#12745 = VECTOR('',#12746,1.); +#12746 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#12747 = ORIENTED_EDGE('',*,*,#12748,.T.); +#12748 = EDGE_CURVE('',#12741,#12253,#12749,.T.); +#12749 = LINE('',#12750,#12751); +#12750 = CARTESIAN_POINT('',(0.9,-5.85,-3.)); +#12751 = VECTOR('',#12752,1.); +#12752 = DIRECTION('',(0.,3.330669073875E-16,1.)); +#12753 = ORIENTED_EDGE('',*,*,#12250,.F.); +#12754 = PLANE('',#12755); +#12755 = AXIS2_PLACEMENT_3D('',#12756,#12757,#12758); +#12756 = CARTESIAN_POINT('',(0.9,-6.15,-3.)); +#12757 = DIRECTION('',(1.,0.,0.)); +#12758 = DIRECTION('',(-0.,3.330669073875E-16,1.)); +#12759 = ADVANCED_FACE('',(#12760),#12794,.T.); +#12760 = FACE_BOUND('',#12761,.T.); +#12761 = EDGE_LOOP('',(#12762,#12772,#12780,#12786,#12787,#12788)); +#12762 = ORIENTED_EDGE('',*,*,#12763,.F.); +#12763 = EDGE_CURVE('',#12764,#12766,#12768,.T.); +#12764 = VERTEX_POINT('',#12765); +#12765 = CARTESIAN_POINT('',(-0.4,-5.85,-3.)); +#12766 = VERTEX_POINT('',#12767); +#12767 = CARTESIAN_POINT('',(0.4,-5.85,-3.)); +#12768 = LINE('',#12769,#12770); +#12769 = CARTESIAN_POINT('',(-0.9,-5.85,-3.)); +#12770 = VECTOR('',#12771,1.); +#12771 = DIRECTION('',(1.,0.,0.)); +#12772 = ORIENTED_EDGE('',*,*,#12773,.T.); +#12773 = EDGE_CURVE('',#12764,#12774,#12776,.T.); +#12774 = VERTEX_POINT('',#12775); +#12775 = CARTESIAN_POINT('',(-0.9,-5.85,-2.5)); +#12776 = LINE('',#12777,#12778); +#12777 = CARTESIAN_POINT('',(-0.65,-5.85,-2.75)); +#12778 = VECTOR('',#12779,1.); +#12779 = DIRECTION('',(-0.707106781187,2.878502840918E-16,0.707106781187 + )); +#12780 = ORIENTED_EDGE('',*,*,#12781,.F.); +#12781 = EDGE_CURVE('',#12269,#12774,#12782,.T.); +#12782 = LINE('',#12783,#12784); +#12783 = CARTESIAN_POINT('',(-0.9,-5.85,-9.992007221626E-17)); +#12784 = VECTOR('',#12785,1.); +#12785 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#12786 = ORIENTED_EDGE('',*,*,#12276,.F.); +#12787 = ORIENTED_EDGE('',*,*,#12748,.F.); +#12788 = ORIENTED_EDGE('',*,*,#12789,.F.); +#12789 = EDGE_CURVE('',#12766,#12741,#12790,.T.); +#12790 = LINE('',#12791,#12792); +#12791 = CARTESIAN_POINT('',(0.2,-5.85,-3.2)); +#12792 = VECTOR('',#12793,1.); +#12793 = DIRECTION('',(0.707106781187,2.878502840918E-16,0.707106781187) + ); +#12794 = PLANE('',#12795); +#12795 = AXIS2_PLACEMENT_3D('',#12796,#12797,#12798); +#12796 = CARTESIAN_POINT('',(-0.9,-5.85,-3.)); +#12797 = DIRECTION('',(0.,1.,-4.070817756959E-16)); +#12798 = DIRECTION('',(0.,4.070817756959E-16,1.)); +#12799 = ADVANCED_FACE('',(#12800),#12818,.T.); +#12800 = FACE_BOUND('',#12801,.T.); +#12801 = EDGE_LOOP('',(#12802,#12810,#12811,#12812)); +#12802 = ORIENTED_EDGE('',*,*,#12803,.F.); +#12803 = EDGE_CURVE('',#12261,#12804,#12806,.T.); +#12804 = VERTEX_POINT('',#12805); +#12805 = CARTESIAN_POINT('',(-0.9,-6.15,-2.5)); +#12806 = LINE('',#12807,#12808); +#12807 = CARTESIAN_POINT('',(-0.9,-6.15,0.)); +#12808 = VECTOR('',#12809,1.); +#12809 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#12810 = ORIENTED_EDGE('',*,*,#12268,.T.); +#12811 = ORIENTED_EDGE('',*,*,#12781,.T.); +#12812 = ORIENTED_EDGE('',*,*,#12813,.F.); +#12813 = EDGE_CURVE('',#12804,#12774,#12814,.T.); +#12814 = LINE('',#12815,#12816); +#12815 = CARTESIAN_POINT('',(-0.9,-6.15,-2.5)); +#12816 = VECTOR('',#12817,1.); +#12817 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#12818 = PLANE('',#12819); +#12819 = AXIS2_PLACEMENT_3D('',#12820,#12821,#12822); +#12820 = CARTESIAN_POINT('',(-0.9,-6.15,0.)); +#12821 = DIRECTION('',(-1.,0.,0.)); +#12822 = DIRECTION('',(-0.,-3.330669073875E-16,-1.)); +#12823 = ADVANCED_FACE('',(#12824),#12851,.F.); +#12824 = FACE_BOUND('',#12825,.F.); +#12825 = EDGE_LOOP('',(#12826,#12836,#12842,#12843,#12844,#12845)); +#12826 = ORIENTED_EDGE('',*,*,#12827,.F.); +#12827 = EDGE_CURVE('',#12828,#12830,#12832,.T.); +#12828 = VERTEX_POINT('',#12829); +#12829 = CARTESIAN_POINT('',(-0.4,-6.15,-3.)); +#12830 = VERTEX_POINT('',#12831); +#12831 = CARTESIAN_POINT('',(0.4,-6.15,-3.)); +#12832 = LINE('',#12833,#12834); +#12833 = CARTESIAN_POINT('',(-0.9,-6.15,-3.)); +#12834 = VECTOR('',#12835,1.); +#12835 = DIRECTION('',(1.,0.,0.)); +#12836 = ORIENTED_EDGE('',*,*,#12837,.T.); +#12837 = EDGE_CURVE('',#12828,#12804,#12838,.T.); +#12838 = LINE('',#12839,#12840); +#12839 = CARTESIAN_POINT('',(-0.65,-6.15,-2.75)); +#12840 = VECTOR('',#12841,1.); +#12841 = DIRECTION('',(-0.707106781187,2.878502840918E-16,0.707106781187 + )); +#12842 = ORIENTED_EDGE('',*,*,#12803,.F.); +#12843 = ORIENTED_EDGE('',*,*,#12260,.F.); +#12844 = ORIENTED_EDGE('',*,*,#12732,.F.); +#12845 = ORIENTED_EDGE('',*,*,#12846,.F.); +#12846 = EDGE_CURVE('',#12830,#12733,#12847,.T.); +#12847 = LINE('',#12848,#12849); +#12848 = CARTESIAN_POINT('',(0.2,-6.15,-3.2)); +#12849 = VECTOR('',#12850,1.); +#12850 = DIRECTION('',(0.707106781187,2.878502840918E-16,0.707106781187) + ); +#12851 = PLANE('',#12852); +#12852 = AXIS2_PLACEMENT_3D('',#12853,#12854,#12855); +#12853 = CARTESIAN_POINT('',(-0.9,-6.15,-3.)); +#12854 = DIRECTION('',(0.,1.,-4.070817756959E-16)); +#12855 = DIRECTION('',(0.,4.070817756959E-16,1.)); +#12856 = ADVANCED_FACE('',(#12857),#12876,.T.); +#12857 = FACE_BOUND('',#12858,.T.); +#12858 = EDGE_LOOP('',(#12859,#12860,#12868,#12875)); +#12859 = ORIENTED_EDGE('',*,*,#12284,.F.); +#12860 = ORIENTED_EDGE('',*,*,#12861,.T.); +#12861 = EDGE_CURVE('',#12285,#12862,#12864,.T.); +#12862 = VERTEX_POINT('',#12863); +#12863 = CARTESIAN_POINT('',(0.75,-9.,-1.8)); +#12864 = LINE('',#12865,#12866); +#12865 = CARTESIAN_POINT('',(0.75,-9.,0.)); +#12866 = VECTOR('',#12867,1.); +#12867 = DIRECTION('',(-0.,-0.,-1.)); +#12868 = ORIENTED_EDGE('',*,*,#12869,.T.); +#12869 = EDGE_CURVE('',#12862,#12862,#12870,.T.); +#12870 = CIRCLE('',#12871,0.75); +#12871 = AXIS2_PLACEMENT_3D('',#12872,#12873,#12874); +#12872 = CARTESIAN_POINT('',(0.,-9.,-1.8)); +#12873 = DIRECTION('',(0.,0.,1.)); +#12874 = DIRECTION('',(1.,0.,-0.)); +#12875 = ORIENTED_EDGE('',*,*,#12861,.F.); +#12876 = CYLINDRICAL_SURFACE('',#12877,0.75); +#12877 = AXIS2_PLACEMENT_3D('',#12878,#12879,#12880); +#12878 = CARTESIAN_POINT('',(0.,-9.,0.)); +#12879 = DIRECTION('',(0.,0.,1.)); +#12880 = DIRECTION('',(1.,0.,-0.)); +#12881 = ADVANCED_FACE('',(#12882),#12893,.T.); +#12882 = FACE_BOUND('',#12883,.T.); +#12883 = EDGE_LOOP('',(#12884,#12885,#12886,#12892)); +#12884 = ORIENTED_EDGE('',*,*,#12311,.F.); +#12885 = ORIENTED_EDGE('',*,*,#12360,.T.); +#12886 = ORIENTED_EDGE('',*,*,#12887,.T.); +#12887 = EDGE_CURVE('',#12336,#12378,#12888,.T.); +#12888 = LINE('',#12889,#12890); +#12889 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#12890 = VECTOR('',#12891,1.); +#12891 = DIRECTION('',(1.,0.,0.)); +#12892 = ORIENTED_EDGE('',*,*,#12401,.T.); +#12893 = PLANE('',#12894); +#12894 = AXIS2_PLACEMENT_3D('',#12895,#12896,#12897); +#12895 = CARTESIAN_POINT('',(-5.,-2.,9.)); +#12896 = DIRECTION('',(0.,-1.,0.)); +#12897 = DIRECTION('',(1.,0.,0.)); +#12898 = ADVANCED_FACE('',(#12899),#12910,.T.); +#12899 = FACE_BOUND('',#12900,.T.); +#12900 = EDGE_LOOP('',(#12901,#12902,#12903,#12909)); +#12901 = ORIENTED_EDGE('',*,*,#12887,.F.); +#12902 = ORIENTED_EDGE('',*,*,#12418,.T.); +#12903 = ORIENTED_EDGE('',*,*,#12904,.F.); +#12904 = EDGE_CURVE('',#12442,#12419,#12905,.T.); +#12905 = LINE('',#12906,#12907); +#12906 = CARTESIAN_POINT('',(5.,-11.,8.5)); +#12907 = VECTOR('',#12908,1.); +#12908 = DIRECTION('',(-1.,0.,0.)); +#12909 = ORIENTED_EDGE('',*,*,#12449,.T.); +#12910 = PLANE('',#12911); +#12911 = AXIS2_PLACEMENT_3D('',#12912,#12913,#12914); +#12912 = CARTESIAN_POINT('',(-5.,-2.,8.5)); +#12913 = DIRECTION('',(0.,0.,1.)); +#12914 = DIRECTION('',(1.,0.,-0.)); +#12915 = ADVANCED_FACE('',(#12916),#12934,.F.); +#12916 = FACE_BOUND('',#12917,.F.); +#12917 = EDGE_LOOP('',(#12918,#12919,#12920,#12928)); +#12918 = ORIENTED_EDGE('',*,*,#12529,.T.); +#12919 = ORIENTED_EDGE('',*,*,#12474,.F.); +#12920 = ORIENTED_EDGE('',*,*,#12921,.T.); +#12921 = EDGE_CURVE('',#12419,#12922,#12924,.T.); +#12922 = VERTEX_POINT('',#12923); +#12923 = CARTESIAN_POINT('',(-4.5,-11.,9.)); +#12924 = LINE('',#12925,#12926); +#12925 = CARTESIAN_POINT('',(-4.5,-11.,0.)); +#12926 = VECTOR('',#12927,1.); +#12927 = DIRECTION('',(0.,0.,1.)); +#12928 = ORIENTED_EDGE('',*,*,#12929,.F.); +#12929 = EDGE_CURVE('',#12522,#12922,#12930,.T.); +#12930 = LINE('',#12931,#12932); +#12931 = CARTESIAN_POINT('',(-5.,-11.,9.)); +#12932 = VECTOR('',#12933,1.); +#12933 = DIRECTION('',(1.,0.,0.)); +#12934 = PLANE('',#12935); +#12935 = AXIS2_PLACEMENT_3D('',#12936,#12937,#12938); +#12936 = CARTESIAN_POINT('',(-5.,-11.,0.)); +#12937 = DIRECTION('',(0.,-1.,0.)); +#12938 = DIRECTION('',(0.,0.,1.)); +#12939 = ADVANCED_FACE('',(#12940),#12958,.F.); +#12940 = FACE_BOUND('',#12941,.F.); +#12941 = EDGE_LOOP('',(#12942,#12943,#12951,#12957)); +#12942 = ORIENTED_EDGE('',*,*,#12546,.F.); +#12943 = ORIENTED_EDGE('',*,*,#12944,.T.); +#12944 = EDGE_CURVE('',#12547,#12945,#12947,.T.); +#12945 = VERTEX_POINT('',#12946); +#12946 = CARTESIAN_POINT('',(4.5,-11.,9.)); +#12947 = LINE('',#12948,#12949); +#12948 = CARTESIAN_POINT('',(5.,-11.,9.)); +#12949 = VECTOR('',#12950,1.); +#12950 = DIRECTION('',(-1.,-0.,-0.)); +#12951 = ORIENTED_EDGE('',*,*,#12952,.T.); +#12952 = EDGE_CURVE('',#12945,#12442,#12953,.T.); +#12953 = LINE('',#12954,#12955); +#12954 = CARTESIAN_POINT('',(4.5,-11.,9.)); +#12955 = VECTOR('',#12956,1.); +#12956 = DIRECTION('',(0.,0.,-1.)); +#12957 = ORIENTED_EDGE('',*,*,#12496,.F.); +#12958 = PLANE('',#12959); +#12959 = AXIS2_PLACEMENT_3D('',#12960,#12961,#12962); +#12960 = CARTESIAN_POINT('',(5.,-11.,9.)); +#12961 = DIRECTION('',(0.,-1.,0.)); +#12962 = DIRECTION('',(0.,0.,-1.)); +#12963 = ADVANCED_FACE('',(#12964),#12977,.T.); +#12964 = FACE_BOUND('',#12965,.T.); +#12965 = EDGE_LOOP('',(#12966,#12972,#12973,#12974,#12975,#12976)); +#12966 = ORIENTED_EDGE('',*,*,#12967,.T.); +#12967 = EDGE_CURVE('',#12945,#12922,#12968,.T.); +#12968 = LINE('',#12969,#12970); +#12969 = CARTESIAN_POINT('',(5.,-11.,9.)); +#12970 = VECTOR('',#12971,1.); +#12971 = DIRECTION('',(-1.,0.,0.)); +#12972 = ORIENTED_EDGE('',*,*,#12929,.F.); +#12973 = ORIENTED_EDGE('',*,*,#12521,.F.); +#12974 = ORIENTED_EDGE('',*,*,#12577,.F.); +#12975 = ORIENTED_EDGE('',*,*,#12554,.F.); +#12976 = ORIENTED_EDGE('',*,*,#12944,.T.); +#12977 = PLANE('',#12978); +#12978 = AXIS2_PLACEMENT_3D('',#12979,#12980,#12981); +#12979 = CARTESIAN_POINT('',(-5.,1.,9.)); +#12980 = DIRECTION('',(0.,0.,1.)); +#12981 = DIRECTION('',(1.,0.,-0.)); +#12982 = ADVANCED_FACE('',(#12983),#13002,.F.); +#12983 = FACE_BOUND('',#12984,.F.); +#12984 = EDGE_LOOP('',(#12985,#12986,#12994,#13001)); +#12985 = ORIENTED_EDGE('',*,*,#12587,.F.); +#12986 = ORIENTED_EDGE('',*,*,#12987,.T.); +#12987 = EDGE_CURVE('',#12588,#12988,#12990,.T.); +#12988 = VERTEX_POINT('',#12989); +#12989 = CARTESIAN_POINT('',(3.25,-3.15,5.)); +#12990 = LINE('',#12991,#12992); +#12991 = CARTESIAN_POINT('',(3.25,-12.,5.)); +#12992 = VECTOR('',#12993,1.); +#12993 = DIRECTION('',(0.,1.,-2.22044604925E-16)); +#12994 = ORIENTED_EDGE('',*,*,#12995,.T.); +#12995 = EDGE_CURVE('',#12988,#12988,#12996,.T.); +#12996 = CIRCLE('',#12997,3.25); +#12997 = AXIS2_PLACEMENT_3D('',#12998,#12999,#13000); +#12998 = CARTESIAN_POINT('',(0.,-3.15,5.)); +#12999 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#13000 = DIRECTION('',(1.,0.,0.)); +#13001 = ORIENTED_EDGE('',*,*,#12987,.F.); +#13002 = CYLINDRICAL_SURFACE('',#13003,3.25); +#13003 = AXIS2_PLACEMENT_3D('',#13004,#13005,#13006); +#13004 = CARTESIAN_POINT('',(0.,-12.,5.)); +#13005 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#13006 = DIRECTION('',(1.,0.,0.)); +#13007 = ADVANCED_FACE('',(#13008),#13019,.T.); +#13008 = FACE_BOUND('',#13009,.T.); +#13009 = EDGE_LOOP('',(#13010,#13011,#13017,#13018)); +#13010 = ORIENTED_EDGE('',*,*,#12718,.F.); +#13011 = ORIENTED_EDGE('',*,*,#13012,.T.); +#13012 = EDGE_CURVE('',#12702,#12638,#13013,.T.); +#13013 = LINE('',#13014,#13015); +#13014 = CARTESIAN_POINT('',(0.55,-0.15,-3.)); +#13015 = VECTOR('',#13016,1.); +#13016 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#13017 = ORIENTED_EDGE('',*,*,#12661,.T.); +#13018 = ORIENTED_EDGE('',*,*,#12612,.F.); +#13019 = PLANE('',#13020); +#13020 = AXIS2_PLACEMENT_3D('',#13021,#13022,#13023); +#13021 = CARTESIAN_POINT('',(0.9,-0.15,-2.65)); +#13022 = DIRECTION('',(0.707106781187,-2.197645501631E-16, + -0.707106781187)); +#13023 = DIRECTION('',(-1.113645000908E-17,1.,-3.219304573785E-16)); +#13024 = ADVANCED_FACE('',(#13025),#13036,.T.); +#13025 = FACE_BOUND('',#13026,.T.); +#13026 = EDGE_LOOP('',(#13027,#13028,#13034,#13035)); +#13027 = ORIENTED_EDGE('',*,*,#12699,.F.); +#13028 = ORIENTED_EDGE('',*,*,#13029,.T.); +#13029 = EDGE_CURVE('',#12700,#12636,#13030,.T.); +#13030 = LINE('',#13031,#13032); +#13031 = CARTESIAN_POINT('',(-0.55,-0.15,-3.)); +#13032 = VECTOR('',#13033,1.); +#13033 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#13034 = ORIENTED_EDGE('',*,*,#12635,.T.); +#13035 = ORIENTED_EDGE('',*,*,#13012,.F.); +#13036 = PLANE('',#13037); +#13037 = AXIS2_PLACEMENT_3D('',#13038,#13039,#13040); +#13038 = CARTESIAN_POINT('',(-1.25,-0.15,-3.)); +#13039 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#13040 = DIRECTION('',(1.,0.,0.)); +#13041 = ADVANCED_FACE('',(#13042),#13048,.T.); +#13042 = FACE_BOUND('',#13043,.F.); +#13043 = EDGE_LOOP('',(#13044,#13045,#13046,#13047)); +#13044 = ORIENTED_EDGE('',*,*,#12709,.F.); +#13045 = ORIENTED_EDGE('',*,*,#13029,.T.); +#13046 = ORIENTED_EDGE('',*,*,#12645,.T.); +#13047 = ORIENTED_EDGE('',*,*,#12685,.F.); +#13048 = PLANE('',#13049); +#13049 = AXIS2_PLACEMENT_3D('',#13050,#13051,#13052); +#13050 = CARTESIAN_POINT('',(-0.9,-0.15,-2.65)); +#13051 = DIRECTION('',(-0.707106781187,-2.197645501631E-16, + -0.707106781187)); +#13052 = DIRECTION('',(-1.113645000908E-17,-1.,3.219304573785E-16)); +#13053 = ADVANCED_FACE('',(#13054),#13065,.T.); +#13054 = FACE_BOUND('',#13055,.T.); +#13055 = EDGE_LOOP('',(#13056,#13057,#13063,#13064)); +#13056 = ORIENTED_EDGE('',*,*,#12846,.F.); +#13057 = ORIENTED_EDGE('',*,*,#13058,.T.); +#13058 = EDGE_CURVE('',#12830,#12766,#13059,.T.); +#13059 = LINE('',#13060,#13061); +#13060 = CARTESIAN_POINT('',(0.4,-6.15,-3.)); +#13061 = VECTOR('',#13062,1.); +#13062 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#13063 = ORIENTED_EDGE('',*,*,#12789,.T.); +#13064 = ORIENTED_EDGE('',*,*,#12740,.F.); +#13065 = PLANE('',#13066); +#13066 = AXIS2_PLACEMENT_3D('',#13067,#13068,#13069); +#13067 = CARTESIAN_POINT('',(0.65,-6.15,-2.75)); +#13068 = DIRECTION('',(0.707106781187,-2.196152214463E-16, + -0.707106781187)); +#13069 = DIRECTION('',(-1.124204135735E-17,1.,-3.218248660302E-16)); +#13070 = ADVANCED_FACE('',(#13071),#13082,.T.); +#13071 = FACE_BOUND('',#13072,.T.); +#13072 = EDGE_LOOP('',(#13073,#13074,#13080,#13081)); +#13073 = ORIENTED_EDGE('',*,*,#12827,.F.); +#13074 = ORIENTED_EDGE('',*,*,#13075,.T.); +#13075 = EDGE_CURVE('',#12828,#12764,#13076,.T.); +#13076 = LINE('',#13077,#13078); +#13077 = CARTESIAN_POINT('',(-0.4,-6.15,-3.)); +#13078 = VECTOR('',#13079,1.); +#13079 = DIRECTION('',(-0.,1.,-3.330669073875E-16)); +#13080 = ORIENTED_EDGE('',*,*,#12763,.T.); +#13081 = ORIENTED_EDGE('',*,*,#13058,.F.); +#13082 = PLANE('',#13083); +#13083 = AXIS2_PLACEMENT_3D('',#13084,#13085,#13086); +#13084 = CARTESIAN_POINT('',(-0.9,-6.15,-3.)); +#13085 = DIRECTION('',(0.,-3.330669073875E-16,-1.)); +#13086 = DIRECTION('',(1.,0.,0.)); +#13087 = ADVANCED_FACE('',(#13088),#13094,.T.); +#13088 = FACE_BOUND('',#13089,.F.); +#13089 = EDGE_LOOP('',(#13090,#13091,#13092,#13093)); +#13090 = ORIENTED_EDGE('',*,*,#12837,.F.); +#13091 = ORIENTED_EDGE('',*,*,#13075,.T.); +#13092 = ORIENTED_EDGE('',*,*,#12773,.T.); +#13093 = ORIENTED_EDGE('',*,*,#12813,.F.); +#13094 = PLANE('',#13095); +#13095 = AXIS2_PLACEMENT_3D('',#13096,#13097,#13098); +#13096 = CARTESIAN_POINT('',(-0.65,-6.15,-2.75)); +#13097 = DIRECTION('',(-0.707106781187,-2.196152214463E-16, + -0.707106781187)); +#13098 = DIRECTION('',(-1.124204135735E-17,-1.,3.218248660302E-16)); +#13099 = ADVANCED_FACE('',(#13100),#13103,.T.); +#13100 = FACE_BOUND('',#13101,.F.); +#13101 = EDGE_LOOP('',(#13102)); +#13102 = ORIENTED_EDGE('',*,*,#12869,.T.); +#13103 = PLANE('',#13104); +#13104 = AXIS2_PLACEMENT_3D('',#13105,#13106,#13107); +#13105 = CARTESIAN_POINT('',(0.75,-9.,-1.8)); +#13106 = DIRECTION('',(0.,0.,-1.)); +#13107 = DIRECTION('',(-1.,0.,0.)); +#13108 = ADVANCED_FACE('',(#13109),#13115,.T.); +#13109 = FACE_BOUND('',#13110,.T.); +#13110 = EDGE_LOOP('',(#13111,#13112,#13113,#13114)); +#13111 = ORIENTED_EDGE('',*,*,#12967,.F.); +#13112 = ORIENTED_EDGE('',*,*,#12952,.T.); +#13113 = ORIENTED_EDGE('',*,*,#12904,.T.); +#13114 = ORIENTED_EDGE('',*,*,#12921,.T.); +#13115 = PLANE('',#13116); +#13116 = AXIS2_PLACEMENT_3D('',#13117,#13118,#13119); +#13117 = CARTESIAN_POINT('',(5.,-11.,9.)); +#13118 = DIRECTION('',(0.,1.,0.)); +#13119 = DIRECTION('',(-1.,0.,0.)); +#13120 = ADVANCED_FACE('',(#13121,#13124),#13135,.F.); +#13121 = FACE_BOUND('',#13122,.F.); +#13122 = EDGE_LOOP('',(#13123)); +#13123 = ORIENTED_EDGE('',*,*,#12995,.F.); +#13124 = FACE_BOUND('',#13125,.F.); +#13125 = EDGE_LOOP('',(#13126)); +#13126 = ORIENTED_EDGE('',*,*,#13127,.T.); +#13127 = EDGE_CURVE('',#13128,#13128,#13130,.T.); +#13128 = VERTEX_POINT('',#13129); +#13129 = CARTESIAN_POINT('',(1.,-3.15,5.)); +#13130 = CIRCLE('',#13131,1.); +#13131 = AXIS2_PLACEMENT_3D('',#13132,#13133,#13134); +#13132 = CARTESIAN_POINT('',(0.,-3.15,5.)); +#13133 = DIRECTION('',(0.,-1.,6.661338147751E-16)); +#13134 = DIRECTION('',(1.,0.,0.)); +#13135 = PLANE('',#13136); +#13136 = AXIS2_PLACEMENT_3D('',#13137,#13138,#13139); +#13137 = CARTESIAN_POINT('',(3.25,-3.15,5.)); +#13138 = DIRECTION('',(-1.821904450667E-16,1.,-3.155631075091E-16)); +#13139 = DIRECTION('',(0.,3.155631075091E-16,1.)); +#13140 = ADVANCED_FACE('',(#13141),#13160,.T.); +#13141 = FACE_BOUND('',#13142,.T.); +#13142 = EDGE_LOOP('',(#13143,#13152,#13158,#13159)); +#13143 = ORIENTED_EDGE('',*,*,#13144,.F.); +#13144 = EDGE_CURVE('',#13145,#13145,#13147,.T.); +#13145 = VERTEX_POINT('',#13146); +#13146 = CARTESIAN_POINT('',(1.,-11.,5.)); +#13147 = CIRCLE('',#13148,1.); +#13148 = AXIS2_PLACEMENT_3D('',#13149,#13150,#13151); +#13149 = CARTESIAN_POINT('',(0.,-11.,5.)); +#13150 = DIRECTION('',(0.,-1.,4.440892098501E-16)); +#13151 = DIRECTION('',(1.,-9.860761315262E-32,-2.22044604925E-16)); +#13152 = ORIENTED_EDGE('',*,*,#13153,.T.); +#13153 = EDGE_CURVE('',#13145,#13128,#13154,.T.); +#13154 = LINE('',#13155,#13156); +#13155 = CARTESIAN_POINT('',(1.,-12.,5.)); +#13156 = VECTOR('',#13157,1.); +#13157 = DIRECTION('',(-0.,1.,-4.440892098501E-16)); +#13158 = ORIENTED_EDGE('',*,*,#13127,.T.); +#13159 = ORIENTED_EDGE('',*,*,#13153,.F.); +#13160 = CYLINDRICAL_SURFACE('',#13161,1.); +#13161 = AXIS2_PLACEMENT_3D('',#13162,#13163,#13164); +#13162 = CARTESIAN_POINT('',(0.,-12.,5.)); +#13163 = DIRECTION('',(0.,-1.,6.661338147751E-16)); +#13164 = DIRECTION('',(1.,0.,0.)); +#13165 = ADVANCED_FACE('',(#13166),#13179,.T.); +#13166 = FACE_BOUND('',#13167,.T.); +#13167 = EDGE_LOOP('',(#13168,#13177,#13178)); +#13168 = ORIENTED_EDGE('',*,*,#13169,.F.); +#13169 = EDGE_CURVE('',#13145,#13170,#13172,.T.); +#13170 = VERTEX_POINT('',#13171); +#13171 = CARTESIAN_POINT('',(6.123233995737E-17,-12.,5.)); +#13172 = CIRCLE('',#13173,1.); +#13173 = AXIS2_PLACEMENT_3D('',#13174,#13175,#13176); +#13174 = CARTESIAN_POINT('',(0.,-11.,5.)); +#13175 = DIRECTION('',(-1.110223024625E-15,-4.440892098501E-16,-1.)); +#13176 = DIRECTION('',(1.,-4.930380657631E-31,-1.110223024625E-15)); +#13177 = ORIENTED_EDGE('',*,*,#13144,.T.); +#13178 = ORIENTED_EDGE('',*,*,#13169,.T.); +#13179 = SPHERICAL_SURFACE('',#13180,1.); +#13180 = AXIS2_PLACEMENT_3D('',#13181,#13182,#13183); +#13181 = CARTESIAN_POINT('',(0.,-11.,5.)); +#13182 = DIRECTION('',(0.,-1.,4.440892098501E-16)); +#13183 = DIRECTION('',(1.,-9.860761315262E-32,-2.22044604925E-16)); +#13184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#13188)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#13185,#13186,#13187)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#13185 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#13186 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#13187 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#13188 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#13185, + 'distance_accuracy_value','confusion accuracy'); +#13189 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#13190,#13192); +#13190 = ( REPRESENTATION_RELATIONSHIP('','',#10498,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#13191) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#13191 = ITEM_DEFINED_TRANSFORMATION('','',#11,#103); +#13192 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #13193); +#13193 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('23','J1','',#5,#10493,$); +#13194 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#10495)); +#13195 = SHAPE_DEFINITION_REPRESENTATION(#13196,#13202); +#13196 = PRODUCT_DEFINITION_SHAPE('','',#13197); +#13197 = PRODUCT_DEFINITION('design','',#13198,#13201); +#13198 = PRODUCT_DEFINITION_FORMATION('','',#13199); +#13199 = PRODUCT('JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical', + 'JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical','',(#13200)); +#13200 = PRODUCT_CONTEXT('',#2,'mechanical'); +#13201 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#13202 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#13203),#17398); +#13203 = MANIFOLD_SOLID_BREP('',#13204); +#13204 = CLOSED_SHELL('',(#13205,#13277,#13316,#13340,#13405,#13429, + #13581,#13605,#13670,#13695,#13744,#13761,#13785,#13802,#13972, + #13996,#14262,#14286,#14319,#14343,#14374,#14391,#14424,#14448, + #14479,#14496,#14529,#14553,#14584,#14601,#14634,#14658,#14689, + #14701,#14734,#14751,#14768,#14780,#14928,#14945,#14962,#14979, + #14996,#15013,#15030,#15047,#15064,#15081,#15098,#15115,#15132, + #15149,#15166,#15178,#15195,#15212,#15229,#15246,#15292,#15338, + #15384,#15430,#15461,#15485,#15509,#15526,#15557,#15581,#15605, + #15622,#15653,#15677,#15701,#15718,#15749,#15773,#15797,#15814, + #15877,#15901,#15957,#15974,#16005,#16029,#16053,#16070,#16101, + #16125,#16149,#16166,#16197,#16253,#16277,#16326,#16357,#16381, + #16405,#16422,#16453,#16477,#16501,#16518,#16549,#16573,#16597, + #16614,#16645,#16669,#16693,#16710,#16757,#16788,#16800,#16817, + #16843,#16876,#16907,#16931,#16955,#16972,#17003,#17027,#17051, + #17068,#17085,#17132,#17158,#17175,#17201,#17234,#17246,#17258, + #17270,#17282,#17299,#17316,#17328,#17340,#17352,#17369,#17386)); +#13205 = ADVANCED_FACE('',(#13206),#13272,.T.); +#13206 = FACE_BOUND('',#13207,.T.); +#13207 = EDGE_LOOP('',(#13208,#13218,#13226,#13234,#13242,#13250,#13258, + #13266)); +#13208 = ORIENTED_EDGE('',*,*,#13209,.T.); +#13209 = EDGE_CURVE('',#13210,#13212,#13214,.T.); +#13210 = VERTEX_POINT('',#13211); +#13211 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#13212 = VERTEX_POINT('',#13213); +#13213 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#13214 = LINE('',#13215,#13216); +#13215 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#13216 = VECTOR('',#13217,1.); +#13217 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13218 = ORIENTED_EDGE('',*,*,#13219,.T.); +#13219 = EDGE_CURVE('',#13212,#13220,#13222,.T.); +#13220 = VERTEX_POINT('',#13221); +#13221 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#13222 = LINE('',#13223,#13224); +#13223 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#13224 = VECTOR('',#13225,1.); +#13225 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13226 = ORIENTED_EDGE('',*,*,#13227,.T.); +#13227 = EDGE_CURVE('',#13220,#13228,#13230,.T.); +#13228 = VERTEX_POINT('',#13229); +#13229 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#13230 = LINE('',#13231,#13232); +#13231 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#13232 = VECTOR('',#13233,1.); +#13233 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13234 = ORIENTED_EDGE('',*,*,#13235,.T.); +#13235 = EDGE_CURVE('',#13228,#13236,#13238,.T.); +#13236 = VERTEX_POINT('',#13237); +#13237 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#13238 = LINE('',#13239,#13240); +#13239 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#13240 = VECTOR('',#13241,1.); +#13241 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13242 = ORIENTED_EDGE('',*,*,#13243,.T.); +#13243 = EDGE_CURVE('',#13236,#13244,#13246,.T.); +#13244 = VERTEX_POINT('',#13245); +#13245 = CARTESIAN_POINT('',(9.3,0.5,7.)); +#13246 = LINE('',#13247,#13248); +#13247 = CARTESIAN_POINT('',(9.95,0.5,7.)); +#13248 = VECTOR('',#13249,1.); +#13249 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13250 = ORIENTED_EDGE('',*,*,#13251,.F.); +#13251 = EDGE_CURVE('',#13252,#13244,#13254,.T.); +#13252 = VERTEX_POINT('',#13253); +#13253 = CARTESIAN_POINT('',(9.3,-2.85,7.)); +#13254 = LINE('',#13255,#13256); +#13255 = CARTESIAN_POINT('',(9.3,-2.65,7.)); +#13256 = VECTOR('',#13257,1.); +#13257 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13258 = ORIENTED_EDGE('',*,*,#13259,.F.); +#13259 = EDGE_CURVE('',#13260,#13252,#13262,.T.); +#13260 = VERTEX_POINT('',#13261); +#13261 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#13262 = LINE('',#13263,#13264); +#13263 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#13264 = VECTOR('',#13265,1.); +#13265 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13266 = ORIENTED_EDGE('',*,*,#13267,.F.); +#13267 = EDGE_CURVE('',#13210,#13260,#13268,.T.); +#13268 = LINE('',#13269,#13270); +#13269 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#13270 = VECTOR('',#13271,1.); +#13271 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13272 = PLANE('',#13273); +#13273 = AXIS2_PLACEMENT_3D('',#13274,#13275,#13276); +#13274 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#13275 = DIRECTION('',(0.,0.,1.)); +#13276 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13277 = ADVANCED_FACE('',(#13278),#13311,.T.); +#13278 = FACE_BOUND('',#13279,.T.); +#13279 = EDGE_LOOP('',(#13280,#13290,#13298,#13304,#13305)); +#13280 = ORIENTED_EDGE('',*,*,#13281,.T.); +#13281 = EDGE_CURVE('',#13282,#13284,#13286,.T.); +#13282 = VERTEX_POINT('',#13283); +#13283 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#13284 = VERTEX_POINT('',#13285); +#13285 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#13286 = LINE('',#13287,#13288); +#13287 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#13288 = VECTOR('',#13289,1.); +#13289 = DIRECTION('',(-0.,0.,-1.)); +#13290 = ORIENTED_EDGE('',*,*,#13291,.T.); +#13291 = EDGE_CURVE('',#13284,#13292,#13294,.T.); +#13292 = VERTEX_POINT('',#13293); +#13293 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#13294 = LINE('',#13295,#13296); +#13295 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#13296 = VECTOR('',#13297,1.); +#13297 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13298 = ORIENTED_EDGE('',*,*,#13299,.T.); +#13299 = EDGE_CURVE('',#13292,#13212,#13300,.T.); +#13300 = LINE('',#13301,#13302); +#13301 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#13302 = VECTOR('',#13303,1.); +#13303 = DIRECTION('',(0.,0.,1.)); +#13304 = ORIENTED_EDGE('',*,*,#13209,.F.); +#13305 = ORIENTED_EDGE('',*,*,#13306,.T.); +#13306 = EDGE_CURVE('',#13210,#13282,#13307,.T.); +#13307 = LINE('',#13308,#13309); +#13308 = CARTESIAN_POINT('',(2.025,0.5,3.175)); +#13309 = VECTOR('',#13310,1.); +#13310 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#13311 = PLANE('',#13312); +#13312 = AXIS2_PLACEMENT_3D('',#13313,#13314,#13315); +#13313 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#13314 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13315 = DIRECTION('',(0.,-0.,1.)); +#13316 = ADVANCED_FACE('',(#13317),#13335,.F.); +#13317 = FACE_BOUND('',#13318,.T.); +#13318 = EDGE_LOOP('',(#13319,#13320,#13321,#13329)); +#13319 = ORIENTED_EDGE('',*,*,#13306,.F.); +#13320 = ORIENTED_EDGE('',*,*,#13267,.T.); +#13321 = ORIENTED_EDGE('',*,*,#13322,.T.); +#13322 = EDGE_CURVE('',#13260,#13323,#13325,.T.); +#13323 = VERTEX_POINT('',#13324); +#13324 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#13325 = LINE('',#13326,#13327); +#13326 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#13327 = VECTOR('',#13328,1.); +#13328 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#13329 = ORIENTED_EDGE('',*,*,#13330,.F.); +#13330 = EDGE_CURVE('',#13282,#13323,#13331,.T.); +#13331 = LINE('',#13332,#13333); +#13332 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#13333 = VECTOR('',#13334,1.); +#13334 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13335 = PLANE('',#13336); +#13336 = AXIS2_PLACEMENT_3D('',#13337,#13338,#13339); +#13337 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#13338 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#13339 = DIRECTION('',(1.224646799147E-16,1.,-2.105272540809E-29)); +#13340 = ADVANCED_FACE('',(#13341),#13400,.F.); +#13341 = FACE_BOUND('',#13342,.F.); +#13342 = EDGE_LOOP('',(#13343,#13353,#13361,#13369,#13377,#13386,#13392, + #13393,#13394)); +#13343 = ORIENTED_EDGE('',*,*,#13344,.F.); +#13344 = EDGE_CURVE('',#13345,#13347,#13349,.T.); +#13345 = VERTEX_POINT('',#13346); +#13346 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#13347 = VERTEX_POINT('',#13348); +#13348 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#13349 = LINE('',#13350,#13351); +#13350 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#13351 = VECTOR('',#13352,1.); +#13352 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13353 = ORIENTED_EDGE('',*,*,#13354,.T.); +#13354 = EDGE_CURVE('',#13345,#13355,#13357,.T.); +#13355 = VERTEX_POINT('',#13356); +#13356 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#13357 = LINE('',#13358,#13359); +#13358 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#13359 = VECTOR('',#13360,1.); +#13360 = DIRECTION('',(0.,0.,1.)); +#13361 = ORIENTED_EDGE('',*,*,#13362,.T.); +#13362 = EDGE_CURVE('',#13355,#13363,#13365,.T.); +#13363 = VERTEX_POINT('',#13364); +#13364 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#13365 = LINE('',#13366,#13367); +#13366 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#13367 = VECTOR('',#13368,1.); +#13368 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13369 = ORIENTED_EDGE('',*,*,#13370,.T.); +#13370 = EDGE_CURVE('',#13363,#13371,#13373,.T.); +#13371 = VERTEX_POINT('',#13372); +#13372 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#13373 = LINE('',#13374,#13375); +#13374 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#13375 = VECTOR('',#13376,1.); +#13376 = DIRECTION('',(-0.,0.,-1.)); +#13377 = ORIENTED_EDGE('',*,*,#13378,.F.); +#13378 = EDGE_CURVE('',#13379,#13371,#13381,.T.); +#13379 = VERTEX_POINT('',#13380); +#13380 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#13381 = CIRCLE('',#13382,0.5); +#13382 = AXIS2_PLACEMENT_3D('',#13383,#13384,#13385); +#13383 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#13384 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13385 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13386 = ORIENTED_EDGE('',*,*,#13387,.T.); +#13387 = EDGE_CURVE('',#13379,#13292,#13388,.T.); +#13388 = LINE('',#13389,#13390); +#13389 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#13390 = VECTOR('',#13391,1.); +#13391 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13392 = ORIENTED_EDGE('',*,*,#13299,.T.); +#13393 = ORIENTED_EDGE('',*,*,#13219,.T.); +#13394 = ORIENTED_EDGE('',*,*,#13395,.F.); +#13395 = EDGE_CURVE('',#13347,#13220,#13396,.T.); +#13396 = LINE('',#13397,#13398); +#13397 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#13398 = VECTOR('',#13399,1.); +#13399 = DIRECTION('',(0.,0.,1.)); +#13400 = PLANE('',#13401); +#13401 = AXIS2_PLACEMENT_3D('',#13402,#13403,#13404); +#13402 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#13403 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13404 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13405 = ADVANCED_FACE('',(#13406),#13424,.F.); +#13406 = FACE_BOUND('',#13407,.T.); +#13407 = EDGE_LOOP('',(#13408,#13409,#13410,#13418)); +#13408 = ORIENTED_EDGE('',*,*,#13322,.F.); +#13409 = ORIENTED_EDGE('',*,*,#13259,.T.); +#13410 = ORIENTED_EDGE('',*,*,#13411,.T.); +#13411 = EDGE_CURVE('',#13252,#13412,#13414,.T.); +#13412 = VERTEX_POINT('',#13413); +#13413 = CARTESIAN_POINT('',(9.1,-2.65,6.8)); +#13414 = LINE('',#13415,#13416); +#13415 = CARTESIAN_POINT('',(7.383333333333,-0.933333333333, + 5.083333333333)); +#13416 = VECTOR('',#13417,1.); +#13417 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#13418 = ORIENTED_EDGE('',*,*,#13419,.F.); +#13419 = EDGE_CURVE('',#13323,#13412,#13420,.T.); +#13420 = LINE('',#13421,#13422); +#13421 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#13422 = VECTOR('',#13423,1.); +#13423 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13424 = PLANE('',#13425); +#13425 = AXIS2_PLACEMENT_3D('',#13426,#13427,#13428); +#13426 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#13427 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#13428 = DIRECTION('',(-1.,1.224646799147E-16,-2.105272540809E-29)); +#13429 = ADVANCED_FACE('',(#13430),#13576,.F.); +#13430 = FACE_BOUND('',#13431,.F.); +#13431 = EDGE_LOOP('',(#13432,#13440,#13441,#13442,#13450,#13458,#13466, + #13474,#13482,#13490,#13498,#13506,#13514,#13522,#13530,#13538, + #13546,#13554,#13562,#13570)); +#13432 = ORIENTED_EDGE('',*,*,#13433,.F.); +#13433 = EDGE_CURVE('',#13347,#13434,#13436,.T.); +#13434 = VERTEX_POINT('',#13435); +#13435 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#13436 = LINE('',#13437,#13438); +#13437 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#13438 = VECTOR('',#13439,1.); +#13439 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13440 = ORIENTED_EDGE('',*,*,#13395,.T.); +#13441 = ORIENTED_EDGE('',*,*,#13227,.T.); +#13442 = ORIENTED_EDGE('',*,*,#13443,.F.); +#13443 = EDGE_CURVE('',#13444,#13228,#13446,.T.); +#13444 = VERTEX_POINT('',#13445); +#13445 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#13446 = LINE('',#13447,#13448); +#13447 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#13448 = VECTOR('',#13449,1.); +#13449 = DIRECTION('',(0.,0.,1.)); +#13450 = ORIENTED_EDGE('',*,*,#13451,.F.); +#13451 = EDGE_CURVE('',#13452,#13444,#13454,.T.); +#13452 = VERTEX_POINT('',#13453); +#13453 = CARTESIAN_POINT('',(8.25,-3.4,0.)); +#13454 = LINE('',#13455,#13456); +#13455 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#13456 = VECTOR('',#13457,1.); +#13457 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13458 = ORIENTED_EDGE('',*,*,#13459,.F.); +#13459 = EDGE_CURVE('',#13460,#13452,#13462,.T.); +#13460 = VERTEX_POINT('',#13461); +#13461 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#13462 = LINE('',#13463,#13464); +#13463 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#13464 = VECTOR('',#13465,1.); +#13465 = DIRECTION('',(-0.,0.,-1.)); +#13466 = ORIENTED_EDGE('',*,*,#13467,.T.); +#13467 = EDGE_CURVE('',#13460,#13468,#13470,.T.); +#13468 = VERTEX_POINT('',#13469); +#13469 = CARTESIAN_POINT('',(6.75,-3.4,1.)); +#13470 = LINE('',#13471,#13472); +#13471 = CARTESIAN_POINT('',(8.25,-3.4,1.)); +#13472 = VECTOR('',#13473,1.); +#13473 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13474 = ORIENTED_EDGE('',*,*,#13475,.T.); +#13475 = EDGE_CURVE('',#13468,#13476,#13478,.T.); +#13476 = VERTEX_POINT('',#13477); +#13477 = CARTESIAN_POINT('',(6.75,-3.4,0.)); +#13478 = LINE('',#13479,#13480); +#13479 = CARTESIAN_POINT('',(6.75,-3.4,1.)); +#13480 = VECTOR('',#13481,1.); +#13481 = DIRECTION('',(-0.,0.,-1.)); +#13482 = ORIENTED_EDGE('',*,*,#13483,.F.); +#13483 = EDGE_CURVE('',#13484,#13476,#13486,.T.); +#13484 = VERTEX_POINT('',#13485); +#13485 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#13486 = LINE('',#13487,#13488); +#13487 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#13488 = VECTOR('',#13489,1.); +#13489 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13490 = ORIENTED_EDGE('',*,*,#13491,.F.); +#13491 = EDGE_CURVE('',#13492,#13484,#13494,.T.); +#13492 = VERTEX_POINT('',#13493); +#13493 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#13494 = LINE('',#13495,#13496); +#13495 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#13496 = VECTOR('',#13497,1.); +#13497 = DIRECTION('',(-0.,0.,-1.)); +#13498 = ORIENTED_EDGE('',*,*,#13499,.T.); +#13499 = EDGE_CURVE('',#13492,#13500,#13502,.T.); +#13500 = VERTEX_POINT('',#13501); +#13501 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#13502 = LINE('',#13503,#13504); +#13503 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#13504 = VECTOR('',#13505,1.); +#13505 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13506 = ORIENTED_EDGE('',*,*,#13507,.T.); +#13507 = EDGE_CURVE('',#13500,#13508,#13510,.T.); +#13508 = VERTEX_POINT('',#13509); +#13509 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#13510 = LINE('',#13511,#13512); +#13511 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#13512 = VECTOR('',#13513,1.); +#13513 = DIRECTION('',(-0.,0.,-1.)); +#13514 = ORIENTED_EDGE('',*,*,#13515,.F.); +#13515 = EDGE_CURVE('',#13516,#13508,#13518,.T.); +#13516 = VERTEX_POINT('',#13517); +#13517 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#13518 = LINE('',#13519,#13520); +#13519 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#13520 = VECTOR('',#13521,1.); +#13521 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13522 = ORIENTED_EDGE('',*,*,#13523,.F.); +#13523 = EDGE_CURVE('',#13524,#13516,#13526,.T.); +#13524 = VERTEX_POINT('',#13525); +#13525 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#13526 = LINE('',#13527,#13528); +#13527 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#13528 = VECTOR('',#13529,1.); +#13529 = DIRECTION('',(-0.,0.,-1.)); +#13530 = ORIENTED_EDGE('',*,*,#13531,.T.); +#13531 = EDGE_CURVE('',#13524,#13532,#13534,.T.); +#13532 = VERTEX_POINT('',#13533); +#13533 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#13534 = LINE('',#13535,#13536); +#13535 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#13536 = VECTOR('',#13537,1.); +#13537 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13538 = ORIENTED_EDGE('',*,*,#13539,.T.); +#13539 = EDGE_CURVE('',#13532,#13540,#13542,.T.); +#13540 = VERTEX_POINT('',#13541); +#13541 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#13542 = LINE('',#13543,#13544); +#13543 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#13544 = VECTOR('',#13545,1.); +#13545 = DIRECTION('',(-0.,0.,-1.)); +#13546 = ORIENTED_EDGE('',*,*,#13547,.F.); +#13547 = EDGE_CURVE('',#13548,#13540,#13550,.T.); +#13548 = VERTEX_POINT('',#13549); +#13549 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#13550 = LINE('',#13551,#13552); +#13551 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#13552 = VECTOR('',#13553,1.); +#13553 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13554 = ORIENTED_EDGE('',*,*,#13555,.F.); +#13555 = EDGE_CURVE('',#13556,#13548,#13558,.T.); +#13556 = VERTEX_POINT('',#13557); +#13557 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#13558 = LINE('',#13559,#13560); +#13559 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#13560 = VECTOR('',#13561,1.); +#13561 = DIRECTION('',(-0.,0.,-1.)); +#13562 = ORIENTED_EDGE('',*,*,#13563,.T.); +#13563 = EDGE_CURVE('',#13556,#13564,#13566,.T.); +#13564 = VERTEX_POINT('',#13565); +#13565 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#13566 = LINE('',#13567,#13568); +#13567 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#13568 = VECTOR('',#13569,1.); +#13569 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13570 = ORIENTED_EDGE('',*,*,#13571,.T.); +#13571 = EDGE_CURVE('',#13564,#13434,#13572,.T.); +#13572 = LINE('',#13573,#13574); +#13573 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#13574 = VECTOR('',#13575,1.); +#13575 = DIRECTION('',(-0.,0.,-1.)); +#13576 = PLANE('',#13577); +#13577 = AXIS2_PLACEMENT_3D('',#13578,#13579,#13580); +#13578 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#13579 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13580 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13581 = ADVANCED_FACE('',(#13582),#13600,.F.); +#13582 = FACE_BOUND('',#13583,.T.); +#13583 = EDGE_LOOP('',(#13584,#13585,#13586,#13594)); +#13584 = ORIENTED_EDGE('',*,*,#13411,.F.); +#13585 = ORIENTED_EDGE('',*,*,#13251,.T.); +#13586 = ORIENTED_EDGE('',*,*,#13587,.T.); +#13587 = EDGE_CURVE('',#13244,#13588,#13590,.T.); +#13588 = VERTEX_POINT('',#13589); +#13589 = CARTESIAN_POINT('',(9.1,0.5,6.8)); +#13590 = LINE('',#13591,#13592); +#13591 = CARTESIAN_POINT('',(8.575,0.5,6.275)); +#13592 = VECTOR('',#13593,1.); +#13593 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#13594 = ORIENTED_EDGE('',*,*,#13595,.F.); +#13595 = EDGE_CURVE('',#13412,#13588,#13596,.T.); +#13596 = LINE('',#13597,#13598); +#13597 = CARTESIAN_POINT('',(9.1,-2.65,6.8)); +#13598 = VECTOR('',#13599,1.); +#13599 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13600 = PLANE('',#13601); +#13601 = AXIS2_PLACEMENT_3D('',#13602,#13603,#13604); +#13602 = CARTESIAN_POINT('',(9.2,-2.65,6.9)); +#13603 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#13604 = DIRECTION('',(-1.224646799147E-16,-1.,-2.105272540809E-29)); +#13605 = ADVANCED_FACE('',(#13606),#13665,.F.); +#13606 = FACE_BOUND('',#13607,.F.); +#13607 = EDGE_LOOP('',(#13608,#13616,#13617,#13618,#13626,#13634,#13643, + #13651,#13659)); +#13608 = ORIENTED_EDGE('',*,*,#13609,.F.); +#13609 = EDGE_CURVE('',#13444,#13610,#13612,.T.); +#13610 = VERTEX_POINT('',#13611); +#13611 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#13612 = LINE('',#13613,#13614); +#13613 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#13614 = VECTOR('',#13615,1.); +#13615 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13616 = ORIENTED_EDGE('',*,*,#13443,.T.); +#13617 = ORIENTED_EDGE('',*,*,#13235,.T.); +#13618 = ORIENTED_EDGE('',*,*,#13619,.F.); +#13619 = EDGE_CURVE('',#13620,#13236,#13622,.T.); +#13620 = VERTEX_POINT('',#13621); +#13621 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#13622 = LINE('',#13623,#13624); +#13623 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#13624 = VECTOR('',#13625,1.); +#13625 = DIRECTION('',(0.,0.,1.)); +#13626 = ORIENTED_EDGE('',*,*,#13627,.F.); +#13627 = EDGE_CURVE('',#13628,#13620,#13630,.T.); +#13628 = VERTEX_POINT('',#13629); +#13629 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#13630 = LINE('',#13631,#13632); +#13631 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#13632 = VECTOR('',#13633,1.); +#13633 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13634 = ORIENTED_EDGE('',*,*,#13635,.F.); +#13635 = EDGE_CURVE('',#13636,#13628,#13638,.T.); +#13636 = VERTEX_POINT('',#13637); +#13637 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#13638 = CIRCLE('',#13639,0.5); +#13639 = AXIS2_PLACEMENT_3D('',#13640,#13641,#13642); +#13640 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#13641 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13642 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13643 = ORIENTED_EDGE('',*,*,#13644,.F.); +#13644 = EDGE_CURVE('',#13645,#13636,#13647,.T.); +#13645 = VERTEX_POINT('',#13646); +#13646 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#13647 = LINE('',#13648,#13649); +#13648 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#13649 = VECTOR('',#13650,1.); +#13650 = DIRECTION('',(-0.,0.,-1.)); +#13651 = ORIENTED_EDGE('',*,*,#13652,.T.); +#13652 = EDGE_CURVE('',#13645,#13653,#13655,.T.); +#13653 = VERTEX_POINT('',#13654); +#13654 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#13655 = LINE('',#13656,#13657); +#13656 = CARTESIAN_POINT('',(9.95,-3.4,7.)); +#13657 = VECTOR('',#13658,1.); +#13658 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13659 = ORIENTED_EDGE('',*,*,#13660,.F.); +#13660 = EDGE_CURVE('',#13610,#13653,#13661,.T.); +#13661 = LINE('',#13662,#13663); +#13662 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#13663 = VECTOR('',#13664,1.); +#13664 = DIRECTION('',(0.,0.,1.)); +#13665 = PLANE('',#13666); +#13666 = AXIS2_PLACEMENT_3D('',#13667,#13668,#13669); +#13667 = CARTESIAN_POINT('',(9.95,-3.4,0.)); +#13668 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13669 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13670 = ADVANCED_FACE('',(#13671),#13690,.T.); +#13671 = FACE_BOUND('',#13672,.T.); +#13672 = EDGE_LOOP('',(#13673,#13674,#13675,#13683,#13689)); +#13673 = ORIENTED_EDGE('',*,*,#13243,.F.); +#13674 = ORIENTED_EDGE('',*,*,#13619,.F.); +#13675 = ORIENTED_EDGE('',*,*,#13676,.T.); +#13676 = EDGE_CURVE('',#13620,#13677,#13679,.T.); +#13677 = VERTEX_POINT('',#13678); +#13678 = CARTESIAN_POINT('',(9.1,0.5,3.65)); +#13679 = LINE('',#13680,#13681); +#13680 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#13681 = VECTOR('',#13682,1.); +#13682 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13683 = ORIENTED_EDGE('',*,*,#13684,.T.); +#13684 = EDGE_CURVE('',#13677,#13588,#13685,.T.); +#13685 = LINE('',#13686,#13687); +#13686 = CARTESIAN_POINT('',(9.1,0.5,5.325)); +#13687 = VECTOR('',#13688,1.); +#13688 = DIRECTION('',(0.,0.,1.)); +#13689 = ORIENTED_EDGE('',*,*,#13587,.F.); +#13690 = PLANE('',#13691); +#13691 = AXIS2_PLACEMENT_3D('',#13692,#13693,#13694); +#13692 = CARTESIAN_POINT('',(9.95,0.5,3.65)); +#13693 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13694 = DIRECTION('',(0.,-0.,1.)); +#13695 = ADVANCED_FACE('',(#13696),#13739,.F.); +#13696 = FACE_BOUND('',#13697,.F.); +#13697 = EDGE_LOOP('',(#13698,#13699,#13707,#13716,#13724,#13732,#13738) + ); +#13698 = ORIENTED_EDGE('',*,*,#13281,.T.); +#13699 = ORIENTED_EDGE('',*,*,#13700,.T.); +#13700 = EDGE_CURVE('',#13284,#13701,#13703,.T.); +#13701 = VERTEX_POINT('',#13702); +#13702 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#13703 = LINE('',#13704,#13705); +#13704 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#13705 = VECTOR('',#13706,1.); +#13706 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13707 = ORIENTED_EDGE('',*,*,#13708,.T.); +#13708 = EDGE_CURVE('',#13701,#13709,#13711,.T.); +#13709 = VERTEX_POINT('',#13710); +#13710 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#13711 = CIRCLE('',#13712,0.5); +#13712 = AXIS2_PLACEMENT_3D('',#13713,#13714,#13715); +#13713 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#13714 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13715 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13716 = ORIENTED_EDGE('',*,*,#13717,.T.); +#13717 = EDGE_CURVE('',#13709,#13718,#13720,.T.); +#13718 = VERTEX_POINT('',#13719); +#13719 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#13720 = LINE('',#13721,#13722); +#13721 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#13722 = VECTOR('',#13723,1.); +#13723 = DIRECTION('',(0.,0.,-1.)); +#13724 = ORIENTED_EDGE('',*,*,#13725,.T.); +#13725 = EDGE_CURVE('',#13718,#13726,#13728,.T.); +#13726 = VERTEX_POINT('',#13727); +#13727 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#13728 = LINE('',#13729,#13730); +#13729 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#13730 = VECTOR('',#13731,1.); +#13731 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13732 = ORIENTED_EDGE('',*,*,#13733,.F.); +#13733 = EDGE_CURVE('',#13323,#13726,#13734,.T.); +#13734 = LINE('',#13735,#13736); +#13735 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#13736 = VECTOR('',#13737,1.); +#13737 = DIRECTION('',(0.,0.,-1.)); +#13738 = ORIENTED_EDGE('',*,*,#13330,.F.); +#13739 = PLANE('',#13740); +#13740 = AXIS2_PLACEMENT_3D('',#13741,#13742,#13743); +#13741 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#13742 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13743 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13744 = ADVANCED_FACE('',(#13745),#13756,.T.); +#13745 = FACE_BOUND('',#13746,.T.); +#13746 = EDGE_LOOP('',(#13747,#13748,#13754,#13755)); +#13747 = ORIENTED_EDGE('',*,*,#13700,.T.); +#13748 = ORIENTED_EDGE('',*,*,#13749,.T.); +#13749 = EDGE_CURVE('',#13701,#13379,#13750,.T.); +#13750 = LINE('',#13751,#13752); +#13751 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#13752 = VECTOR('',#13753,1.); +#13753 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13754 = ORIENTED_EDGE('',*,*,#13387,.T.); +#13755 = ORIENTED_EDGE('',*,*,#13291,.F.); +#13756 = PLANE('',#13757); +#13757 = AXIS2_PLACEMENT_3D('',#13758,#13759,#13760); +#13758 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#13759 = DIRECTION('',(0.,0.,1.)); +#13760 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13761 = ADVANCED_FACE('',(#13762),#13780,.F.); +#13762 = FACE_BOUND('',#13763,.F.); +#13763 = EDGE_LOOP('',(#13764,#13772,#13773,#13774)); +#13764 = ORIENTED_EDGE('',*,*,#13765,.T.); +#13765 = EDGE_CURVE('',#13766,#13345,#13768,.T.); +#13766 = VERTEX_POINT('',#13767); +#13767 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#13768 = LINE('',#13769,#13770); +#13769 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#13770 = VECTOR('',#13771,1.); +#13771 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13772 = ORIENTED_EDGE('',*,*,#13344,.T.); +#13773 = ORIENTED_EDGE('',*,*,#13433,.T.); +#13774 = ORIENTED_EDGE('',*,*,#13775,.T.); +#13775 = EDGE_CURVE('',#13434,#13766,#13776,.T.); +#13776 = LINE('',#13777,#13778); +#13777 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#13778 = VECTOR('',#13779,1.); +#13779 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13780 = PLANE('',#13781); +#13781 = AXIS2_PLACEMENT_3D('',#13782,#13783,#13784); +#13782 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#13783 = DIRECTION('',(0.,0.,1.)); +#13784 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13785 = ADVANCED_FACE('',(#13786),#13797,.F.); +#13786 = FACE_BOUND('',#13787,.F.); +#13787 = EDGE_LOOP('',(#13788,#13789,#13790,#13796)); +#13788 = ORIENTED_EDGE('',*,*,#13749,.T.); +#13789 = ORIENTED_EDGE('',*,*,#13378,.T.); +#13790 = ORIENTED_EDGE('',*,*,#13791,.F.); +#13791 = EDGE_CURVE('',#13709,#13371,#13792,.T.); +#13792 = LINE('',#13793,#13794); +#13793 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#13794 = VECTOR('',#13795,1.); +#13795 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13796 = ORIENTED_EDGE('',*,*,#13708,.F.); +#13797 = CYLINDRICAL_SURFACE('',#13798,0.5); +#13798 = AXIS2_PLACEMENT_3D('',#13799,#13800,#13801); +#13799 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#13800 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#13801 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#13802 = ADVANCED_FACE('',(#13803),#13967,.T.); +#13803 = FACE_BOUND('',#13804,.T.); +#13804 = EDGE_LOOP('',(#13805,#13806,#13814,#13822,#13830,#13838,#13846, + #13855,#13863,#13871,#13879,#13887,#13895,#13904,#13912,#13920, + #13928,#13936,#13942,#13943,#13944,#13945,#13953,#13961)); +#13805 = ORIENTED_EDGE('',*,*,#13644,.F.); +#13806 = ORIENTED_EDGE('',*,*,#13807,.T.); +#13807 = EDGE_CURVE('',#13645,#13808,#13810,.T.); +#13808 = VERTEX_POINT('',#13809); +#13809 = CARTESIAN_POINT('',(8.,1.5,7.)); +#13810 = LINE('',#13811,#13812); +#13811 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#13812 = VECTOR('',#13813,1.); +#13813 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13814 = ORIENTED_EDGE('',*,*,#13815,.T.); +#13815 = EDGE_CURVE('',#13808,#13816,#13818,.T.); +#13816 = VERTEX_POINT('',#13817); +#13817 = CARTESIAN_POINT('',(8.,1.5,6.1)); +#13818 = LINE('',#13819,#13820); +#13819 = CARTESIAN_POINT('',(8.,1.5,5.318198005698)); +#13820 = VECTOR('',#13821,1.); +#13821 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#13822 = ORIENTED_EDGE('',*,*,#13823,.T.); +#13823 = EDGE_CURVE('',#13816,#13824,#13826,.T.); +#13824 = VERTEX_POINT('',#13825); +#13825 = CARTESIAN_POINT('',(7.75,1.5,5.85)); +#13826 = LINE('',#13827,#13828); +#13827 = CARTESIAN_POINT('',(6.421599002849,1.5,4.521599002849)); +#13828 = VECTOR('',#13829,1.); +#13829 = DIRECTION('',(-0.707106781187,1.466048277022E-16, + -0.707106781187)); +#13830 = ORIENTED_EDGE('',*,*,#13831,.T.); +#13831 = EDGE_CURVE('',#13824,#13832,#13834,.T.); +#13832 = VERTEX_POINT('',#13833); +#13833 = CARTESIAN_POINT('',(8.,1.5,5.6)); +#13834 = LINE('',#13835,#13836); +#13835 = CARTESIAN_POINT('',(7.203400997151,1.5,6.396599002849)); +#13836 = VECTOR('',#13837,1.); +#13837 = DIRECTION('',(0.707106781187,-2.658638354479E-17, + -0.707106781187)); +#13838 = ORIENTED_EDGE('',*,*,#13839,.T.); +#13839 = EDGE_CURVE('',#13832,#13840,#13842,.T.); +#13840 = VERTEX_POINT('',#13841); +#13841 = CARTESIAN_POINT('',(8.,1.5,3.85)); +#13842 = LINE('',#13843,#13844); +#13843 = CARTESIAN_POINT('',(8.,1.5,3.818198005698)); +#13844 = VECTOR('',#13845,1.); +#13845 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#13846 = ORIENTED_EDGE('',*,*,#13847,.F.); +#13847 = EDGE_CURVE('',#13848,#13840,#13850,.T.); +#13848 = VERTEX_POINT('',#13849); +#13849 = CARTESIAN_POINT('',(7.25,1.5,3.1)); +#13850 = CIRCLE('',#13851,0.75); +#13851 = AXIS2_PLACEMENT_3D('',#13852,#13853,#13854); +#13852 = CARTESIAN_POINT('',(7.25,1.5,3.85)); +#13853 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13854 = DIRECTION('',(-0.,0.,-1.)); +#13855 = ORIENTED_EDGE('',*,*,#13856,.T.); +#13856 = EDGE_CURVE('',#13848,#13857,#13859,.T.); +#13857 = VERTEX_POINT('',#13858); +#13858 = CARTESIAN_POINT('',(6.5,1.5,3.1)); +#13859 = LINE('',#13860,#13861); +#13860 = CARTESIAN_POINT('',(5.125,1.5,3.1)); +#13861 = VECTOR('',#13862,1.); +#13862 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13863 = ORIENTED_EDGE('',*,*,#13864,.T.); +#13864 = EDGE_CURVE('',#13857,#13865,#13867,.T.); +#13865 = VERTEX_POINT('',#13866); +#13866 = CARTESIAN_POINT('',(6.5,1.5,7.)); +#13867 = LINE('',#13868,#13869); +#13868 = CARTESIAN_POINT('',(6.5,1.5,5.768198005698)); +#13869 = VECTOR('',#13870,1.); +#13870 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#13871 = ORIENTED_EDGE('',*,*,#13872,.T.); +#13872 = EDGE_CURVE('',#13865,#13873,#13875,.T.); +#13873 = VERTEX_POINT('',#13874); +#13874 = CARTESIAN_POINT('',(1.,1.5,7.)); +#13875 = LINE('',#13876,#13877); +#13876 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#13877 = VECTOR('',#13878,1.); +#13878 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13879 = ORIENTED_EDGE('',*,*,#13880,.F.); +#13880 = EDGE_CURVE('',#13881,#13873,#13883,.T.); +#13881 = VERTEX_POINT('',#13882); +#13882 = CARTESIAN_POINT('',(1.,1.5,3.1)); +#13883 = LINE('',#13884,#13885); +#13884 = CARTESIAN_POINT('',(1.,1.5,5.768198005698)); +#13885 = VECTOR('',#13886,1.); +#13886 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#13887 = ORIENTED_EDGE('',*,*,#13888,.F.); +#13888 = EDGE_CURVE('',#13889,#13881,#13891,.T.); +#13889 = VERTEX_POINT('',#13890); +#13890 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#13891 = LINE('',#13892,#13893); +#13892 = CARTESIAN_POINT('',(2.375,1.5,3.1)); +#13893 = VECTOR('',#13894,1.); +#13894 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#13895 = ORIENTED_EDGE('',*,*,#13896,.F.); +#13896 = EDGE_CURVE('',#13897,#13889,#13899,.T.); +#13897 = VERTEX_POINT('',#13898); +#13898 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#13899 = CIRCLE('',#13900,0.75); +#13900 = AXIS2_PLACEMENT_3D('',#13901,#13902,#13903); +#13901 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#13902 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13903 = DIRECTION('',(-0.,0.,-1.)); +#13904 = ORIENTED_EDGE('',*,*,#13905,.F.); +#13905 = EDGE_CURVE('',#13906,#13897,#13908,.T.); +#13906 = VERTEX_POINT('',#13907); +#13907 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#13908 = LINE('',#13909,#13910); +#13909 = CARTESIAN_POINT('',(-0.5,1.5,3.818198005698)); +#13910 = VECTOR('',#13911,1.); +#13911 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#13912 = ORIENTED_EDGE('',*,*,#13913,.F.); +#13913 = EDGE_CURVE('',#13914,#13906,#13916,.T.); +#13914 = VERTEX_POINT('',#13915); +#13915 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#13916 = LINE('',#13917,#13918); +#13917 = CARTESIAN_POINT('',(0.296599002849,1.5,6.396599002849)); +#13918 = VECTOR('',#13919,1.); +#13919 = DIRECTION('',(-0.707106781187,1.466048277022E-16, + -0.707106781187)); +#13920 = ORIENTED_EDGE('',*,*,#13921,.F.); +#13921 = EDGE_CURVE('',#13922,#13914,#13924,.T.); +#13922 = VERTEX_POINT('',#13923); +#13923 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#13924 = LINE('',#13925,#13926); +#13925 = CARTESIAN_POINT('',(1.078400997151,1.5,4.521599002849)); +#13926 = VECTOR('',#13927,1.); +#13927 = DIRECTION('',(0.707106781187,-2.658638354479E-17, + -0.707106781187)); +#13928 = ORIENTED_EDGE('',*,*,#13929,.F.); +#13929 = EDGE_CURVE('',#13930,#13922,#13932,.T.); +#13930 = VERTEX_POINT('',#13931); +#13931 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#13932 = LINE('',#13933,#13934); +#13933 = CARTESIAN_POINT('',(-0.5,1.5,5.318198005698)); +#13934 = VECTOR('',#13935,1.); +#13935 = DIRECTION('',(1.039306985781E-32,8.486585573121E-17,-1.)); +#13936 = ORIENTED_EDGE('',*,*,#13937,.T.); +#13937 = EDGE_CURVE('',#13930,#13363,#13938,.T.); +#13938 = LINE('',#13939,#13940); +#13939 = CARTESIAN_POINT('',(9.95,1.5,7.)); +#13940 = VECTOR('',#13941,1.); +#13941 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13942 = ORIENTED_EDGE('',*,*,#13370,.T.); +#13943 = ORIENTED_EDGE('',*,*,#13791,.F.); +#13944 = ORIENTED_EDGE('',*,*,#13717,.T.); +#13945 = ORIENTED_EDGE('',*,*,#13946,.F.); +#13946 = EDGE_CURVE('',#13947,#13718,#13949,.T.); +#13947 = VERTEX_POINT('',#13948); +#13948 = CARTESIAN_POINT('',(9.1,1.5,1.85)); +#13949 = LINE('',#13950,#13951); +#13950 = CARTESIAN_POINT('',(9.1,1.5,1.85)); +#13951 = VECTOR('',#13952,1.); +#13952 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13953 = ORIENTED_EDGE('',*,*,#13954,.F.); +#13954 = EDGE_CURVE('',#13955,#13947,#13957,.T.); +#13955 = VERTEX_POINT('',#13956); +#13956 = CARTESIAN_POINT('',(9.1,1.5,4.15)); +#13957 = LINE('',#13958,#13959); +#13958 = CARTESIAN_POINT('',(9.1,1.5,7.)); +#13959 = VECTOR('',#13960,1.); +#13960 = DIRECTION('',(0.,0.,-1.)); +#13961 = ORIENTED_EDGE('',*,*,#13962,.F.); +#13962 = EDGE_CURVE('',#13636,#13955,#13963,.T.); +#13963 = LINE('',#13964,#13965); +#13964 = CARTESIAN_POINT('',(9.95,1.5,4.15)); +#13965 = VECTOR('',#13966,1.); +#13966 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13967 = PLANE('',#13968); +#13968 = AXIS2_PLACEMENT_3D('',#13969,#13970,#13971); +#13969 = CARTESIAN_POINT('',(3.75,1.5,4.536396011396)); +#13970 = DIRECTION('',(-1.224646799147E-16,-1.,-8.486585573121E-17)); +#13971 = DIRECTION('',(-1.039306985781E-32,-8.486585573121E-17,1.)); +#13972 = ADVANCED_FACE('',(#13973),#13991,.T.); +#13973 = FACE_BOUND('',#13974,.T.); +#13974 = EDGE_LOOP('',(#13975,#13976,#13984,#13990)); +#13975 = ORIENTED_EDGE('',*,*,#13937,.F.); +#13976 = ORIENTED_EDGE('',*,*,#13977,.F.); +#13977 = EDGE_CURVE('',#13978,#13930,#13980,.T.); +#13978 = VERTEX_POINT('',#13979); +#13979 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#13980 = LINE('',#13981,#13982); +#13981 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#13982 = VECTOR('',#13983,1.); +#13983 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#13984 = ORIENTED_EDGE('',*,*,#13985,.T.); +#13985 = EDGE_CURVE('',#13978,#13355,#13986,.T.); +#13986 = LINE('',#13987,#13988); +#13987 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#13988 = VECTOR('',#13989,1.); +#13989 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13990 = ORIENTED_EDGE('',*,*,#13362,.T.); +#13991 = PLANE('',#13992); +#13992 = AXIS2_PLACEMENT_3D('',#13993,#13994,#13995); +#13993 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#13994 = DIRECTION('',(0.,0.,1.)); +#13995 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#13996 = ADVANCED_FACE('',(#13997),#14257,.F.); +#13997 = FACE_BOUND('',#13998,.F.); +#13998 = EDGE_LOOP('',(#13999,#14007,#14008,#14016,#14024,#14032,#14040, + #14048,#14057,#14065,#14073,#14081,#14089,#14097,#14106,#14114, + #14122,#14130,#14136,#14137,#14138,#14139,#14147,#14155,#14163, + #14171,#14179,#14187,#14195,#14203,#14211,#14219,#14227,#14235, + #14243,#14251)); +#13999 = ORIENTED_EDGE('',*,*,#14000,.F.); +#14000 = EDGE_CURVE('',#13610,#14001,#14003,.T.); +#14001 = VERTEX_POINT('',#14002); +#14002 = CARTESIAN_POINT('',(8.25,2.35,0.)); +#14003 = LINE('',#14004,#14005); +#14004 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#14005 = VECTOR('',#14006,1.); +#14006 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14007 = ORIENTED_EDGE('',*,*,#13660,.T.); +#14008 = ORIENTED_EDGE('',*,*,#14009,.T.); +#14009 = EDGE_CURVE('',#13653,#14010,#14012,.T.); +#14010 = VERTEX_POINT('',#14011); +#14011 = CARTESIAN_POINT('',(8.,2.35,7.)); +#14012 = LINE('',#14013,#14014); +#14013 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#14014 = VECTOR('',#14015,1.); +#14015 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14016 = ORIENTED_EDGE('',*,*,#14017,.F.); +#14017 = EDGE_CURVE('',#14018,#14010,#14020,.T.); +#14018 = VERTEX_POINT('',#14019); +#14019 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#14020 = LINE('',#14021,#14022); +#14021 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#14022 = VECTOR('',#14023,1.); +#14023 = DIRECTION('',(0.,0.,1.)); +#14024 = ORIENTED_EDGE('',*,*,#14025,.F.); +#14025 = EDGE_CURVE('',#14026,#14018,#14028,.T.); +#14026 = VERTEX_POINT('',#14027); +#14027 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#14028 = LINE('',#14029,#14030); +#14029 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#14030 = VECTOR('',#14031,1.); +#14031 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#14032 = ORIENTED_EDGE('',*,*,#14033,.F.); +#14033 = EDGE_CURVE('',#14034,#14026,#14036,.T.); +#14034 = VERTEX_POINT('',#14035); +#14035 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#14036 = LINE('',#14037,#14038); +#14037 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#14038 = VECTOR('',#14039,1.); +#14039 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#14040 = ORIENTED_EDGE('',*,*,#14041,.F.); +#14041 = EDGE_CURVE('',#14042,#14034,#14044,.T.); +#14042 = VERTEX_POINT('',#14043); +#14043 = CARTESIAN_POINT('',(8.,2.35,3.85)); +#14044 = LINE('',#14045,#14046); +#14045 = CARTESIAN_POINT('',(8.,2.35,3.1)); +#14046 = VECTOR('',#14047,1.); +#14047 = DIRECTION('',(0.,0.,1.)); +#14048 = ORIENTED_EDGE('',*,*,#14049,.F.); +#14049 = EDGE_CURVE('',#14050,#14042,#14052,.T.); +#14050 = VERTEX_POINT('',#14051); +#14051 = CARTESIAN_POINT('',(7.25,2.35,3.1)); +#14052 = CIRCLE('',#14053,0.75); +#14053 = AXIS2_PLACEMENT_3D('',#14054,#14055,#14056); +#14054 = CARTESIAN_POINT('',(7.25,2.35,3.85)); +#14055 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14056 = DIRECTION('',(0.,0.,1.)); +#14057 = ORIENTED_EDGE('',*,*,#14058,.F.); +#14058 = EDGE_CURVE('',#14059,#14050,#14061,.T.); +#14059 = VERTEX_POINT('',#14060); +#14060 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#14061 = LINE('',#14062,#14063); +#14062 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#14063 = VECTOR('',#14064,1.); +#14064 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14065 = ORIENTED_EDGE('',*,*,#14066,.F.); +#14066 = EDGE_CURVE('',#14067,#14059,#14069,.T.); +#14067 = VERTEX_POINT('',#14068); +#14068 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#14069 = LINE('',#14070,#14071); +#14070 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#14071 = VECTOR('',#14072,1.); +#14072 = DIRECTION('',(-0.,0.,-1.)); +#14073 = ORIENTED_EDGE('',*,*,#14074,.T.); +#14074 = EDGE_CURVE('',#14067,#14075,#14077,.T.); +#14075 = VERTEX_POINT('',#14076); +#14076 = CARTESIAN_POINT('',(1.,2.35,7.)); +#14077 = LINE('',#14078,#14079); +#14078 = CARTESIAN_POINT('',(9.95,2.35,7.)); +#14079 = VECTOR('',#14080,1.); +#14080 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14081 = ORIENTED_EDGE('',*,*,#14082,.T.); +#14082 = EDGE_CURVE('',#14075,#14083,#14085,.T.); +#14083 = VERTEX_POINT('',#14084); +#14084 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#14085 = LINE('',#14086,#14087); +#14086 = CARTESIAN_POINT('',(1.,2.35,7.)); +#14087 = VECTOR('',#14088,1.); +#14088 = DIRECTION('',(-0.,0.,-1.)); +#14089 = ORIENTED_EDGE('',*,*,#14090,.T.); +#14090 = EDGE_CURVE('',#14083,#14091,#14093,.T.); +#14091 = VERTEX_POINT('',#14092); +#14092 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#14093 = LINE('',#14094,#14095); +#14094 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#14095 = VECTOR('',#14096,1.); +#14096 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14097 = ORIENTED_EDGE('',*,*,#14098,.T.); +#14098 = EDGE_CURVE('',#14091,#14099,#14101,.T.); +#14099 = VERTEX_POINT('',#14100); +#14100 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#14101 = CIRCLE('',#14102,0.75); +#14102 = AXIS2_PLACEMENT_3D('',#14103,#14104,#14105); +#14103 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#14104 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#14105 = DIRECTION('',(0.,0.,1.)); +#14106 = ORIENTED_EDGE('',*,*,#14107,.T.); +#14107 = EDGE_CURVE('',#14099,#14108,#14110,.T.); +#14108 = VERTEX_POINT('',#14109); +#14109 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#14110 = LINE('',#14111,#14112); +#14111 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#14112 = VECTOR('',#14113,1.); +#14113 = DIRECTION('',(0.,0.,1.)); +#14114 = ORIENTED_EDGE('',*,*,#14115,.T.); +#14115 = EDGE_CURVE('',#14108,#14116,#14118,.T.); +#14116 = VERTEX_POINT('',#14117); +#14117 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#14118 = LINE('',#14119,#14120); +#14119 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#14120 = VECTOR('',#14121,1.); +#14121 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#14122 = ORIENTED_EDGE('',*,*,#14123,.T.); +#14123 = EDGE_CURVE('',#14116,#14124,#14126,.T.); +#14124 = VERTEX_POINT('',#14125); +#14125 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#14126 = LINE('',#14127,#14128); +#14127 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#14128 = VECTOR('',#14129,1.); +#14129 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#14130 = ORIENTED_EDGE('',*,*,#14131,.T.); +#14131 = EDGE_CURVE('',#14124,#13978,#14132,.T.); +#14132 = LINE('',#14133,#14134); +#14133 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#14134 = VECTOR('',#14135,1.); +#14135 = DIRECTION('',(0.,0.,1.)); +#14136 = ORIENTED_EDGE('',*,*,#13985,.T.); +#14137 = ORIENTED_EDGE('',*,*,#13354,.F.); +#14138 = ORIENTED_EDGE('',*,*,#13765,.F.); +#14139 = ORIENTED_EDGE('',*,*,#14140,.T.); +#14140 = EDGE_CURVE('',#13766,#14141,#14143,.T.); +#14141 = VERTEX_POINT('',#14142); +#14142 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#14143 = LINE('',#14144,#14145); +#14144 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#14145 = VECTOR('',#14146,1.); +#14146 = DIRECTION('',(0.,0.,1.)); +#14147 = ORIENTED_EDGE('',*,*,#14148,.F.); +#14148 = EDGE_CURVE('',#14149,#14141,#14151,.T.); +#14149 = VERTEX_POINT('',#14150); +#14150 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#14151 = LINE('',#14152,#14153); +#14152 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#14153 = VECTOR('',#14154,1.); +#14154 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14155 = ORIENTED_EDGE('',*,*,#14156,.F.); +#14156 = EDGE_CURVE('',#14157,#14149,#14159,.T.); +#14157 = VERTEX_POINT('',#14158); +#14158 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#14159 = LINE('',#14160,#14161); +#14160 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#14161 = VECTOR('',#14162,1.); +#14162 = DIRECTION('',(0.,0.,1.)); +#14163 = ORIENTED_EDGE('',*,*,#14164,.F.); +#14164 = EDGE_CURVE('',#14165,#14157,#14167,.T.); +#14165 = VERTEX_POINT('',#14166); +#14166 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#14167 = LINE('',#14168,#14169); +#14168 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#14169 = VECTOR('',#14170,1.); +#14170 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14171 = ORIENTED_EDGE('',*,*,#14172,.T.); +#14172 = EDGE_CURVE('',#14165,#14173,#14175,.T.); +#14173 = VERTEX_POINT('',#14174); +#14174 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#14175 = LINE('',#14176,#14177); +#14176 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#14177 = VECTOR('',#14178,1.); +#14178 = DIRECTION('',(0.,0.,1.)); +#14179 = ORIENTED_EDGE('',*,*,#14180,.F.); +#14180 = EDGE_CURVE('',#14181,#14173,#14183,.T.); +#14181 = VERTEX_POINT('',#14182); +#14182 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#14183 = LINE('',#14184,#14185); +#14184 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#14185 = VECTOR('',#14186,1.); +#14186 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14187 = ORIENTED_EDGE('',*,*,#14188,.F.); +#14188 = EDGE_CURVE('',#14189,#14181,#14191,.T.); +#14189 = VERTEX_POINT('',#14190); +#14190 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#14191 = LINE('',#14192,#14193); +#14192 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#14193 = VECTOR('',#14194,1.); +#14194 = DIRECTION('',(0.,0.,1.)); +#14195 = ORIENTED_EDGE('',*,*,#14196,.F.); +#14196 = EDGE_CURVE('',#14197,#14189,#14199,.T.); +#14197 = VERTEX_POINT('',#14198); +#14198 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#14199 = LINE('',#14200,#14201); +#14200 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#14201 = VECTOR('',#14202,1.); +#14202 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14203 = ORIENTED_EDGE('',*,*,#14204,.T.); +#14204 = EDGE_CURVE('',#14197,#14205,#14207,.T.); +#14205 = VERTEX_POINT('',#14206); +#14206 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#14207 = LINE('',#14208,#14209); +#14208 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#14209 = VECTOR('',#14210,1.); +#14210 = DIRECTION('',(0.,0.,1.)); +#14211 = ORIENTED_EDGE('',*,*,#14212,.F.); +#14212 = EDGE_CURVE('',#14213,#14205,#14215,.T.); +#14213 = VERTEX_POINT('',#14214); +#14214 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#14215 = LINE('',#14216,#14217); +#14216 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#14217 = VECTOR('',#14218,1.); +#14218 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14219 = ORIENTED_EDGE('',*,*,#14220,.F.); +#14220 = EDGE_CURVE('',#14221,#14213,#14223,.T.); +#14221 = VERTEX_POINT('',#14222); +#14222 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#14223 = LINE('',#14224,#14225); +#14224 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#14225 = VECTOR('',#14226,1.); +#14226 = DIRECTION('',(0.,0.,1.)); +#14227 = ORIENTED_EDGE('',*,*,#14228,.F.); +#14228 = EDGE_CURVE('',#14229,#14221,#14231,.T.); +#14229 = VERTEX_POINT('',#14230); +#14230 = CARTESIAN_POINT('',(6.75,2.35,0.)); +#14231 = LINE('',#14232,#14233); +#14232 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#14233 = VECTOR('',#14234,1.); +#14234 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14235 = ORIENTED_EDGE('',*,*,#14236,.T.); +#14236 = EDGE_CURVE('',#14229,#14237,#14239,.T.); +#14237 = VERTEX_POINT('',#14238); +#14238 = CARTESIAN_POINT('',(6.75,2.35,1.)); +#14239 = LINE('',#14240,#14241); +#14240 = CARTESIAN_POINT('',(6.75,2.35,0.)); +#14241 = VECTOR('',#14242,1.); +#14242 = DIRECTION('',(0.,0.,1.)); +#14243 = ORIENTED_EDGE('',*,*,#14244,.F.); +#14244 = EDGE_CURVE('',#14245,#14237,#14247,.T.); +#14245 = VERTEX_POINT('',#14246); +#14246 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#14247 = LINE('',#14248,#14249); +#14248 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#14249 = VECTOR('',#14250,1.); +#14250 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14251 = ORIENTED_EDGE('',*,*,#14252,.F.); +#14252 = EDGE_CURVE('',#14001,#14245,#14253,.T.); +#14253 = LINE('',#14254,#14255); +#14254 = CARTESIAN_POINT('',(8.25,2.35,0.)); +#14255 = VECTOR('',#14256,1.); +#14256 = DIRECTION('',(0.,0.,1.)); +#14257 = PLANE('',#14258); +#14258 = AXIS2_PLACEMENT_3D('',#14259,#14260,#14261); +#14259 = CARTESIAN_POINT('',(9.95,2.35,0.)); +#14260 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14261 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14262 = ADVANCED_FACE('',(#14263),#14281,.F.); +#14263 = FACE_BOUND('',#14264,.F.); +#14264 = EDGE_LOOP('',(#14265,#14266,#14274,#14280)); +#14265 = ORIENTED_EDGE('',*,*,#13733,.T.); +#14266 = ORIENTED_EDGE('',*,*,#14267,.T.); +#14267 = EDGE_CURVE('',#13726,#14268,#14270,.T.); +#14268 = VERTEX_POINT('',#14269); +#14269 = CARTESIAN_POINT('',(9.1,-2.65,1.85)); +#14270 = LINE('',#14271,#14272); +#14271 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#14272 = VECTOR('',#14273,1.); +#14273 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14274 = ORIENTED_EDGE('',*,*,#14275,.F.); +#14275 = EDGE_CURVE('',#13412,#14268,#14276,.T.); +#14276 = LINE('',#14277,#14278); +#14277 = CARTESIAN_POINT('',(9.1,-2.65,7.)); +#14278 = VECTOR('',#14279,1.); +#14279 = DIRECTION('',(0.,0.,-1.)); +#14280 = ORIENTED_EDGE('',*,*,#13419,.F.); +#14281 = PLANE('',#14282); +#14282 = AXIS2_PLACEMENT_3D('',#14283,#14284,#14285); +#14283 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#14284 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14285 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14286 = ADVANCED_FACE('',(#14287),#14314,.T.); +#14287 = FACE_BOUND('',#14288,.T.); +#14288 = EDGE_LOOP('',(#14289,#14290,#14298,#14306,#14312,#14313)); +#14289 = ORIENTED_EDGE('',*,*,#14140,.T.); +#14290 = ORIENTED_EDGE('',*,*,#14291,.T.); +#14291 = EDGE_CURVE('',#14141,#14292,#14294,.T.); +#14292 = VERTEX_POINT('',#14293); +#14293 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#14294 = LINE('',#14295,#14296); +#14295 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#14296 = VECTOR('',#14297,1.); +#14297 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#14298 = ORIENTED_EDGE('',*,*,#14299,.T.); +#14299 = EDGE_CURVE('',#14292,#14300,#14302,.T.); +#14300 = VERTEX_POINT('',#14301); +#14301 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#14302 = LINE('',#14303,#14304); +#14303 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#14304 = VECTOR('',#14305,1.); +#14305 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14306 = ORIENTED_EDGE('',*,*,#14307,.T.); +#14307 = EDGE_CURVE('',#14300,#13564,#14308,.T.); +#14308 = LINE('',#14309,#14310); +#14309 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#14310 = VECTOR('',#14311,1.); +#14311 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14312 = ORIENTED_EDGE('',*,*,#13571,.T.); +#14313 = ORIENTED_EDGE('',*,*,#13775,.T.); +#14314 = PLANE('',#14315); +#14315 = AXIS2_PLACEMENT_3D('',#14316,#14317,#14318); +#14316 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#14317 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#14318 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#14319 = ADVANCED_FACE('',(#14320),#14338,.F.); +#14320 = FACE_BOUND('',#14321,.F.); +#14321 = EDGE_LOOP('',(#14322,#14330,#14331,#14332)); +#14322 = ORIENTED_EDGE('',*,*,#14323,.T.); +#14323 = EDGE_CURVE('',#14324,#14300,#14326,.T.); +#14324 = VERTEX_POINT('',#14325); +#14325 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#14326 = LINE('',#14327,#14328); +#14327 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#14328 = VECTOR('',#14329,1.); +#14329 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14330 = ORIENTED_EDGE('',*,*,#14307,.T.); +#14331 = ORIENTED_EDGE('',*,*,#13563,.F.); +#14332 = ORIENTED_EDGE('',*,*,#14333,.F.); +#14333 = EDGE_CURVE('',#14324,#13556,#14334,.T.); +#14334 = LINE('',#14335,#14336); +#14335 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#14336 = VECTOR('',#14337,1.); +#14337 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14338 = PLANE('',#14339); +#14339 = AXIS2_PLACEMENT_3D('',#14340,#14341,#14342); +#14340 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#14341 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#14342 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14343 = ADVANCED_FACE('',(#14344),#14369,.F.); +#14344 = FACE_BOUND('',#14345,.F.); +#14345 = EDGE_LOOP('',(#14346,#14347,#14355,#14361,#14362,#14363)); +#14346 = ORIENTED_EDGE('',*,*,#14156,.T.); +#14347 = ORIENTED_EDGE('',*,*,#14348,.T.); +#14348 = EDGE_CURVE('',#14149,#14349,#14351,.T.); +#14349 = VERTEX_POINT('',#14350); +#14350 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#14351 = LINE('',#14352,#14353); +#14352 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#14353 = VECTOR('',#14354,1.); +#14354 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#14355 = ORIENTED_EDGE('',*,*,#14356,.T.); +#14356 = EDGE_CURVE('',#14349,#14324,#14357,.T.); +#14357 = LINE('',#14358,#14359); +#14358 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#14359 = VECTOR('',#14360,1.); +#14360 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14361 = ORIENTED_EDGE('',*,*,#14333,.T.); +#14362 = ORIENTED_EDGE('',*,*,#13555,.T.); +#14363 = ORIENTED_EDGE('',*,*,#14364,.T.); +#14364 = EDGE_CURVE('',#13548,#14157,#14365,.T.); +#14365 = LINE('',#14366,#14367); +#14366 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#14367 = VECTOR('',#14368,1.); +#14368 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14369 = PLANE('',#14370); +#14370 = AXIS2_PLACEMENT_3D('',#14371,#14372,#14373); +#14371 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#14372 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#14373 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#14374 = ADVANCED_FACE('',(#14375),#14386,.F.); +#14375 = FACE_BOUND('',#14376,.F.); +#14376 = EDGE_LOOP('',(#14377,#14378,#14379,#14380)); +#14377 = ORIENTED_EDGE('',*,*,#14164,.T.); +#14378 = ORIENTED_EDGE('',*,*,#14364,.F.); +#14379 = ORIENTED_EDGE('',*,*,#13547,.T.); +#14380 = ORIENTED_EDGE('',*,*,#14381,.T.); +#14381 = EDGE_CURVE('',#13540,#14165,#14382,.T.); +#14382 = LINE('',#14383,#14384); +#14383 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#14384 = VECTOR('',#14385,1.); +#14385 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14386 = PLANE('',#14387); +#14387 = AXIS2_PLACEMENT_3D('',#14388,#14389,#14390); +#14388 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#14389 = DIRECTION('',(0.,0.,1.)); +#14390 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14391 = ADVANCED_FACE('',(#14392),#14419,.T.); +#14392 = FACE_BOUND('',#14393,.T.); +#14393 = EDGE_LOOP('',(#14394,#14395,#14403,#14411,#14417,#14418)); +#14394 = ORIENTED_EDGE('',*,*,#14172,.T.); +#14395 = ORIENTED_EDGE('',*,*,#14396,.T.); +#14396 = EDGE_CURVE('',#14173,#14397,#14399,.T.); +#14397 = VERTEX_POINT('',#14398); +#14398 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#14399 = LINE('',#14400,#14401); +#14400 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#14401 = VECTOR('',#14402,1.); +#14402 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#14403 = ORIENTED_EDGE('',*,*,#14404,.T.); +#14404 = EDGE_CURVE('',#14397,#14405,#14407,.T.); +#14405 = VERTEX_POINT('',#14406); +#14406 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#14407 = LINE('',#14408,#14409); +#14408 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#14409 = VECTOR('',#14410,1.); +#14410 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14411 = ORIENTED_EDGE('',*,*,#14412,.T.); +#14412 = EDGE_CURVE('',#14405,#13532,#14413,.T.); +#14413 = LINE('',#14414,#14415); +#14414 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#14415 = VECTOR('',#14416,1.); +#14416 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14417 = ORIENTED_EDGE('',*,*,#13539,.T.); +#14418 = ORIENTED_EDGE('',*,*,#14381,.T.); +#14419 = PLANE('',#14420); +#14420 = AXIS2_PLACEMENT_3D('',#14421,#14422,#14423); +#14421 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#14422 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#14423 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#14424 = ADVANCED_FACE('',(#14425),#14443,.F.); +#14425 = FACE_BOUND('',#14426,.F.); +#14426 = EDGE_LOOP('',(#14427,#14435,#14436,#14437)); +#14427 = ORIENTED_EDGE('',*,*,#14428,.T.); +#14428 = EDGE_CURVE('',#14429,#14405,#14431,.T.); +#14429 = VERTEX_POINT('',#14430); +#14430 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#14431 = LINE('',#14432,#14433); +#14432 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#14433 = VECTOR('',#14434,1.); +#14434 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14435 = ORIENTED_EDGE('',*,*,#14412,.T.); +#14436 = ORIENTED_EDGE('',*,*,#13531,.F.); +#14437 = ORIENTED_EDGE('',*,*,#14438,.F.); +#14438 = EDGE_CURVE('',#14429,#13524,#14439,.T.); +#14439 = LINE('',#14440,#14441); +#14440 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#14441 = VECTOR('',#14442,1.); +#14442 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14443 = PLANE('',#14444); +#14444 = AXIS2_PLACEMENT_3D('',#14445,#14446,#14447); +#14445 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#14446 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#14447 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14448 = ADVANCED_FACE('',(#14449),#14474,.F.); +#14449 = FACE_BOUND('',#14450,.F.); +#14450 = EDGE_LOOP('',(#14451,#14452,#14460,#14466,#14467,#14468)); +#14451 = ORIENTED_EDGE('',*,*,#14188,.T.); +#14452 = ORIENTED_EDGE('',*,*,#14453,.T.); +#14453 = EDGE_CURVE('',#14181,#14454,#14456,.T.); +#14454 = VERTEX_POINT('',#14455); +#14455 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#14456 = LINE('',#14457,#14458); +#14457 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#14458 = VECTOR('',#14459,1.); +#14459 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#14460 = ORIENTED_EDGE('',*,*,#14461,.T.); +#14461 = EDGE_CURVE('',#14454,#14429,#14462,.T.); +#14462 = LINE('',#14463,#14464); +#14463 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#14464 = VECTOR('',#14465,1.); +#14465 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14466 = ORIENTED_EDGE('',*,*,#14438,.T.); +#14467 = ORIENTED_EDGE('',*,*,#13523,.T.); +#14468 = ORIENTED_EDGE('',*,*,#14469,.T.); +#14469 = EDGE_CURVE('',#13516,#14189,#14470,.T.); +#14470 = LINE('',#14471,#14472); +#14471 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#14472 = VECTOR('',#14473,1.); +#14473 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14474 = PLANE('',#14475); +#14475 = AXIS2_PLACEMENT_3D('',#14476,#14477,#14478); +#14476 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#14477 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#14478 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#14479 = ADVANCED_FACE('',(#14480),#14491,.F.); +#14480 = FACE_BOUND('',#14481,.F.); +#14481 = EDGE_LOOP('',(#14482,#14483,#14484,#14490)); +#14482 = ORIENTED_EDGE('',*,*,#14469,.F.); +#14483 = ORIENTED_EDGE('',*,*,#13515,.T.); +#14484 = ORIENTED_EDGE('',*,*,#14485,.T.); +#14485 = EDGE_CURVE('',#13508,#14197,#14486,.T.); +#14486 = LINE('',#14487,#14488); +#14487 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#14488 = VECTOR('',#14489,1.); +#14489 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14490 = ORIENTED_EDGE('',*,*,#14196,.T.); +#14491 = PLANE('',#14492); +#14492 = AXIS2_PLACEMENT_3D('',#14493,#14494,#14495); +#14493 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#14494 = DIRECTION('',(0.,0.,1.)); +#14495 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14496 = ADVANCED_FACE('',(#14497),#14524,.T.); +#14497 = FACE_BOUND('',#14498,.T.); +#14498 = EDGE_LOOP('',(#14499,#14500,#14508,#14516,#14522,#14523)); +#14499 = ORIENTED_EDGE('',*,*,#14204,.T.); +#14500 = ORIENTED_EDGE('',*,*,#14501,.T.); +#14501 = EDGE_CURVE('',#14205,#14502,#14504,.T.); +#14502 = VERTEX_POINT('',#14503); +#14503 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#14504 = LINE('',#14505,#14506); +#14505 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#14506 = VECTOR('',#14507,1.); +#14507 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#14508 = ORIENTED_EDGE('',*,*,#14509,.T.); +#14509 = EDGE_CURVE('',#14502,#14510,#14512,.T.); +#14510 = VERTEX_POINT('',#14511); +#14511 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#14512 = LINE('',#14513,#14514); +#14513 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#14514 = VECTOR('',#14515,1.); +#14515 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14516 = ORIENTED_EDGE('',*,*,#14517,.T.); +#14517 = EDGE_CURVE('',#14510,#13500,#14518,.T.); +#14518 = LINE('',#14519,#14520); +#14519 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#14520 = VECTOR('',#14521,1.); +#14521 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14522 = ORIENTED_EDGE('',*,*,#13507,.T.); +#14523 = ORIENTED_EDGE('',*,*,#14485,.T.); +#14524 = PLANE('',#14525); +#14525 = AXIS2_PLACEMENT_3D('',#14526,#14527,#14528); +#14526 = CARTESIAN_POINT('',(4.25,-0.515451356496,0.330008245993)); +#14527 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#14528 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#14529 = ADVANCED_FACE('',(#14530),#14548,.F.); +#14530 = FACE_BOUND('',#14531,.F.); +#14531 = EDGE_LOOP('',(#14532,#14540,#14541,#14542)); +#14532 = ORIENTED_EDGE('',*,*,#14533,.T.); +#14533 = EDGE_CURVE('',#14534,#14510,#14536,.T.); +#14534 = VERTEX_POINT('',#14535); +#14535 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#14536 = LINE('',#14537,#14538); +#14537 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#14538 = VECTOR('',#14539,1.); +#14539 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14540 = ORIENTED_EDGE('',*,*,#14517,.T.); +#14541 = ORIENTED_EDGE('',*,*,#13499,.F.); +#14542 = ORIENTED_EDGE('',*,*,#14543,.F.); +#14543 = EDGE_CURVE('',#14534,#13492,#14544,.T.); +#14544 = LINE('',#14545,#14546); +#14545 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#14546 = VECTOR('',#14547,1.); +#14547 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14548 = PLANE('',#14549); +#14549 = AXIS2_PLACEMENT_3D('',#14550,#14551,#14552); +#14550 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#14551 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#14552 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14553 = ADVANCED_FACE('',(#14554),#14579,.F.); +#14554 = FACE_BOUND('',#14555,.F.); +#14555 = EDGE_LOOP('',(#14556,#14557,#14565,#14571,#14572,#14573)); +#14556 = ORIENTED_EDGE('',*,*,#14220,.T.); +#14557 = ORIENTED_EDGE('',*,*,#14558,.T.); +#14558 = EDGE_CURVE('',#14213,#14559,#14561,.T.); +#14559 = VERTEX_POINT('',#14560); +#14560 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#14561 = LINE('',#14562,#14563); +#14562 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#14563 = VECTOR('',#14564,1.); +#14564 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#14565 = ORIENTED_EDGE('',*,*,#14566,.T.); +#14566 = EDGE_CURVE('',#14559,#14534,#14567,.T.); +#14567 = LINE('',#14568,#14569); +#14568 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#14569 = VECTOR('',#14570,1.); +#14570 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14571 = ORIENTED_EDGE('',*,*,#14543,.T.); +#14572 = ORIENTED_EDGE('',*,*,#13491,.T.); +#14573 = ORIENTED_EDGE('',*,*,#14574,.T.); +#14574 = EDGE_CURVE('',#13484,#14221,#14575,.T.); +#14575 = LINE('',#14576,#14577); +#14576 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#14577 = VECTOR('',#14578,1.); +#14578 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14579 = PLANE('',#14580); +#14580 = AXIS2_PLACEMENT_3D('',#14581,#14582,#14583); +#14581 = CARTESIAN_POINT('',(5.75,-0.515451356496,0.330008245993)); +#14582 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#14583 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#14584 = ADVANCED_FACE('',(#14585),#14596,.F.); +#14585 = FACE_BOUND('',#14586,.F.); +#14586 = EDGE_LOOP('',(#14587,#14588,#14594,#14595)); +#14587 = ORIENTED_EDGE('',*,*,#13483,.T.); +#14588 = ORIENTED_EDGE('',*,*,#14589,.T.); +#14589 = EDGE_CURVE('',#13476,#14229,#14590,.T.); +#14590 = LINE('',#14591,#14592); +#14591 = CARTESIAN_POINT('',(6.75,-3.4,0.)); +#14592 = VECTOR('',#14593,1.); +#14593 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14594 = ORIENTED_EDGE('',*,*,#14228,.T.); +#14595 = ORIENTED_EDGE('',*,*,#14574,.F.); +#14596 = PLANE('',#14597); +#14597 = AXIS2_PLACEMENT_3D('',#14598,#14599,#14600); +#14598 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#14599 = DIRECTION('',(0.,0.,1.)); +#14600 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14601 = ADVANCED_FACE('',(#14602),#14629,.T.); +#14602 = FACE_BOUND('',#14603,.T.); +#14603 = EDGE_LOOP('',(#14604,#14605,#14613,#14621,#14627,#14628)); +#14604 = ORIENTED_EDGE('',*,*,#14236,.T.); +#14605 = ORIENTED_EDGE('',*,*,#14606,.T.); +#14606 = EDGE_CURVE('',#14237,#14607,#14609,.T.); +#14607 = VERTEX_POINT('',#14608); +#14608 = CARTESIAN_POINT('',(6.75,0.5,0.3)); +#14609 = LINE('',#14610,#14611); +#14610 = CARTESIAN_POINT('',(6.75,2.35,1.)); +#14611 = VECTOR('',#14612,1.); +#14612 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#14613 = ORIENTED_EDGE('',*,*,#14614,.T.); +#14614 = EDGE_CURVE('',#14607,#14615,#14617,.T.); +#14615 = VERTEX_POINT('',#14616); +#14616 = CARTESIAN_POINT('',(6.75,-0.5,0.3)); +#14617 = LINE('',#14618,#14619); +#14618 = CARTESIAN_POINT('',(6.75,0.5,0.3)); +#14619 = VECTOR('',#14620,1.); +#14620 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14621 = ORIENTED_EDGE('',*,*,#14622,.T.); +#14622 = EDGE_CURVE('',#14615,#13468,#14623,.T.); +#14623 = LINE('',#14624,#14625); +#14624 = CARTESIAN_POINT('',(6.75,-0.5,0.3)); +#14625 = VECTOR('',#14626,1.); +#14626 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14627 = ORIENTED_EDGE('',*,*,#13475,.T.); +#14628 = ORIENTED_EDGE('',*,*,#14589,.T.); +#14629 = PLANE('',#14630); +#14630 = AXIS2_PLACEMENT_3D('',#14631,#14632,#14633); +#14631 = CARTESIAN_POINT('',(6.75,-0.515451356496,0.330008245993)); +#14632 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#14633 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#14634 = ADVANCED_FACE('',(#14635),#14653,.F.); +#14635 = FACE_BOUND('',#14636,.F.); +#14636 = EDGE_LOOP('',(#14637,#14645,#14646,#14647)); +#14637 = ORIENTED_EDGE('',*,*,#14638,.T.); +#14638 = EDGE_CURVE('',#14639,#14615,#14641,.T.); +#14639 = VERTEX_POINT('',#14640); +#14640 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#14641 = LINE('',#14642,#14643); +#14642 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#14643 = VECTOR('',#14644,1.); +#14644 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14645 = ORIENTED_EDGE('',*,*,#14622,.T.); +#14646 = ORIENTED_EDGE('',*,*,#13467,.F.); +#14647 = ORIENTED_EDGE('',*,*,#14648,.F.); +#14648 = EDGE_CURVE('',#14639,#13460,#14649,.T.); +#14649 = LINE('',#14650,#14651); +#14650 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#14651 = VECTOR('',#14652,1.); +#14652 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14653 = PLANE('',#14654); +#14654 = AXIS2_PLACEMENT_3D('',#14655,#14656,#14657); +#14655 = CARTESIAN_POINT('',(8.25,-0.5,0.3)); +#14656 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#14657 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#14658 = ADVANCED_FACE('',(#14659),#14684,.F.); +#14659 = FACE_BOUND('',#14660,.F.); +#14660 = EDGE_LOOP('',(#14661,#14662,#14670,#14676,#14677,#14678)); +#14661 = ORIENTED_EDGE('',*,*,#14252,.T.); +#14662 = ORIENTED_EDGE('',*,*,#14663,.T.); +#14663 = EDGE_CURVE('',#14245,#14664,#14666,.T.); +#14664 = VERTEX_POINT('',#14665); +#14665 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#14666 = LINE('',#14667,#14668); +#14667 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#14668 = VECTOR('',#14669,1.); +#14669 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#14670 = ORIENTED_EDGE('',*,*,#14671,.T.); +#14671 = EDGE_CURVE('',#14664,#14639,#14672,.T.); +#14672 = LINE('',#14673,#14674); +#14673 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#14674 = VECTOR('',#14675,1.); +#14675 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14676 = ORIENTED_EDGE('',*,*,#14648,.T.); +#14677 = ORIENTED_EDGE('',*,*,#13459,.T.); +#14678 = ORIENTED_EDGE('',*,*,#14679,.T.); +#14679 = EDGE_CURVE('',#13452,#14001,#14680,.T.); +#14680 = LINE('',#14681,#14682); +#14681 = CARTESIAN_POINT('',(8.25,-3.4,0.)); +#14682 = VECTOR('',#14683,1.); +#14683 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14684 = PLANE('',#14685); +#14685 = AXIS2_PLACEMENT_3D('',#14686,#14687,#14688); +#14686 = CARTESIAN_POINT('',(8.25,-0.515451356496,0.330008245993)); +#14687 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#14688 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#14689 = ADVANCED_FACE('',(#14690),#14696,.F.); +#14690 = FACE_BOUND('',#14691,.F.); +#14691 = EDGE_LOOP('',(#14692,#14693,#14694,#14695)); +#14692 = ORIENTED_EDGE('',*,*,#13609,.T.); +#14693 = ORIENTED_EDGE('',*,*,#14000,.T.); +#14694 = ORIENTED_EDGE('',*,*,#14679,.F.); +#14695 = ORIENTED_EDGE('',*,*,#13451,.T.); +#14696 = PLANE('',#14697); +#14697 = AXIS2_PLACEMENT_3D('',#14698,#14699,#14700); +#14698 = CARTESIAN_POINT('',(3.75,-0.525,0.)); +#14699 = DIRECTION('',(0.,0.,1.)); +#14700 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14701 = ADVANCED_FACE('',(#14702),#14729,.F.); +#14702 = FACE_BOUND('',#14703,.F.); +#14703 = EDGE_LOOP('',(#14704,#14705,#14706,#14707,#14713,#14714,#14723) + ); +#14704 = ORIENTED_EDGE('',*,*,#13684,.T.); +#14705 = ORIENTED_EDGE('',*,*,#13595,.F.); +#14706 = ORIENTED_EDGE('',*,*,#14275,.T.); +#14707 = ORIENTED_EDGE('',*,*,#14708,.T.); +#14708 = EDGE_CURVE('',#14268,#13947,#14709,.T.); +#14709 = LINE('',#14710,#14711); +#14710 = CARTESIAN_POINT('',(9.1,-2.65,1.85)); +#14711 = VECTOR('',#14712,1.); +#14712 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14713 = ORIENTED_EDGE('',*,*,#13954,.F.); +#14714 = ORIENTED_EDGE('',*,*,#14715,.F.); +#14715 = EDGE_CURVE('',#14716,#13955,#14718,.T.); +#14716 = VERTEX_POINT('',#14717); +#14717 = CARTESIAN_POINT('',(9.1,1.,3.65)); +#14718 = CIRCLE('',#14719,0.5); +#14719 = AXIS2_PLACEMENT_3D('',#14720,#14721,#14722); +#14720 = CARTESIAN_POINT('',(9.1,1.,4.15)); +#14721 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14722 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14723 = ORIENTED_EDGE('',*,*,#14724,.T.); +#14724 = EDGE_CURVE('',#14716,#13677,#14725,.T.); +#14725 = LINE('',#14726,#14727); +#14726 = CARTESIAN_POINT('',(9.1,-0.825,3.65)); +#14727 = VECTOR('',#14728,1.); +#14728 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14729 = PLANE('',#14730); +#14730 = AXIS2_PLACEMENT_3D('',#14731,#14732,#14733); +#14731 = CARTESIAN_POINT('',(9.1,-2.65,7.)); +#14732 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14733 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14734 = ADVANCED_FACE('',(#14735),#14746,.T.); +#14735 = FACE_BOUND('',#14736,.T.); +#14736 = EDGE_LOOP('',(#14737,#14738,#14739,#14740)); +#14737 = ORIENTED_EDGE('',*,*,#13807,.F.); +#14738 = ORIENTED_EDGE('',*,*,#13652,.T.); +#14739 = ORIENTED_EDGE('',*,*,#14009,.T.); +#14740 = ORIENTED_EDGE('',*,*,#14741,.T.); +#14741 = EDGE_CURVE('',#14010,#13808,#14742,.T.); +#14742 = LINE('',#14743,#14744); +#14743 = CARTESIAN_POINT('',(8.,2.35,7.)); +#14744 = VECTOR('',#14745,1.); +#14745 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14746 = PLANE('',#14747); +#14747 = AXIS2_PLACEMENT_3D('',#14748,#14749,#14750); +#14748 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#14749 = DIRECTION('',(0.,0.,1.)); +#14750 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14751 = ADVANCED_FACE('',(#14752),#14763,.F.); +#14752 = FACE_BOUND('',#14753,.F.); +#14753 = EDGE_LOOP('',(#14754,#14760,#14761,#14762)); +#14754 = ORIENTED_EDGE('',*,*,#14755,.T.); +#14755 = EDGE_CURVE('',#13628,#14716,#14756,.T.); +#14756 = LINE('',#14757,#14758); +#14757 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#14758 = VECTOR('',#14759,1.); +#14759 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14760 = ORIENTED_EDGE('',*,*,#14715,.T.); +#14761 = ORIENTED_EDGE('',*,*,#13962,.F.); +#14762 = ORIENTED_EDGE('',*,*,#13635,.T.); +#14763 = CYLINDRICAL_SURFACE('',#14764,0.5); +#14764 = AXIS2_PLACEMENT_3D('',#14765,#14766,#14767); +#14765 = CARTESIAN_POINT('',(9.95,1.,4.15)); +#14766 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#14767 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#14768 = ADVANCED_FACE('',(#14769),#14775,.T.); +#14769 = FACE_BOUND('',#14770,.T.); +#14770 = EDGE_LOOP('',(#14771,#14772,#14773,#14774)); +#14771 = ORIENTED_EDGE('',*,*,#13627,.F.); +#14772 = ORIENTED_EDGE('',*,*,#14755,.T.); +#14773 = ORIENTED_EDGE('',*,*,#14724,.T.); +#14774 = ORIENTED_EDGE('',*,*,#13676,.F.); +#14775 = PLANE('',#14776); +#14776 = AXIS2_PLACEMENT_3D('',#14777,#14778,#14779); +#14777 = CARTESIAN_POINT('',(9.95,1.,3.65)); +#14778 = DIRECTION('',(0.,0.,1.)); +#14779 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14780 = ADVANCED_FACE('',(#14781,#14787,#14821,#14855,#14889),#14923, + .T.); +#14781 = FACE_BOUND('',#14782,.T.); +#14782 = EDGE_LOOP('',(#14783,#14784,#14785,#14786)); +#14783 = ORIENTED_EDGE('',*,*,#13946,.T.); +#14784 = ORIENTED_EDGE('',*,*,#13725,.T.); +#14785 = ORIENTED_EDGE('',*,*,#14267,.T.); +#14786 = ORIENTED_EDGE('',*,*,#14708,.T.); +#14787 = FACE_BOUND('',#14788,.T.); +#14788 = EDGE_LOOP('',(#14789,#14799,#14807,#14815)); +#14789 = ORIENTED_EDGE('',*,*,#14790,.F.); +#14790 = EDGE_CURVE('',#14791,#14793,#14795,.T.); +#14791 = VERTEX_POINT('',#14792); +#14792 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#14793 = VERTEX_POINT('',#14794); +#14794 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#14795 = LINE('',#14796,#14797); +#14796 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#14797 = VECTOR('',#14798,1.); +#14798 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14799 = ORIENTED_EDGE('',*,*,#14800,.T.); +#14800 = EDGE_CURVE('',#14791,#14801,#14803,.T.); +#14801 = VERTEX_POINT('',#14802); +#14802 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#14803 = LINE('',#14804,#14805); +#14804 = CARTESIAN_POINT('',(2.035,0.32,1.85)); +#14805 = VECTOR('',#14806,1.); +#14806 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14807 = ORIENTED_EDGE('',*,*,#14808,.T.); +#14808 = EDGE_CURVE('',#14801,#14809,#14811,.T.); +#14809 = VERTEX_POINT('',#14810); +#14810 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#14811 = LINE('',#14812,#14813); +#14812 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#14813 = VECTOR('',#14814,1.); +#14814 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14815 = ORIENTED_EDGE('',*,*,#14816,.T.); +#14816 = EDGE_CURVE('',#14809,#14793,#14817,.T.); +#14817 = LINE('',#14818,#14819); +#14818 = CARTESIAN_POINT('',(2.035,-0.32,1.85)); +#14819 = VECTOR('',#14820,1.); +#14820 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14821 = FACE_BOUND('',#14822,.T.); +#14822 = EDGE_LOOP('',(#14823,#14833,#14841,#14849)); +#14823 = ORIENTED_EDGE('',*,*,#14824,.T.); +#14824 = EDGE_CURVE('',#14825,#14827,#14829,.T.); +#14825 = VERTEX_POINT('',#14826); +#14826 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#14827 = VERTEX_POINT('',#14828); +#14828 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#14829 = LINE('',#14830,#14831); +#14830 = CARTESIAN_POINT('',(2.82,-0.2875,1.85)); +#14831 = VECTOR('',#14832,1.); +#14832 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14833 = ORIENTED_EDGE('',*,*,#14834,.T.); +#14834 = EDGE_CURVE('',#14827,#14835,#14837,.T.); +#14835 = VERTEX_POINT('',#14836); +#14836 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#14837 = LINE('',#14838,#14839); +#14838 = CARTESIAN_POINT('',(3.285,-0.32,1.85)); +#14839 = VECTOR('',#14840,1.); +#14840 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14841 = ORIENTED_EDGE('',*,*,#14842,.F.); +#14842 = EDGE_CURVE('',#14843,#14835,#14845,.T.); +#14843 = VERTEX_POINT('',#14844); +#14844 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#14845 = LINE('',#14846,#14847); +#14846 = CARTESIAN_POINT('',(2.18,-0.2875,1.85)); +#14847 = VECTOR('',#14848,1.); +#14848 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14849 = ORIENTED_EDGE('',*,*,#14850,.T.); +#14850 = EDGE_CURVE('',#14843,#14825,#14851,.T.); +#14851 = LINE('',#14852,#14853); +#14852 = CARTESIAN_POINT('',(3.285,0.32,1.85)); +#14853 = VECTOR('',#14854,1.); +#14854 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14855 = FACE_BOUND('',#14856,.T.); +#14856 = EDGE_LOOP('',(#14857,#14867,#14875,#14883)); +#14857 = ORIENTED_EDGE('',*,*,#14858,.F.); +#14858 = EDGE_CURVE('',#14859,#14861,#14863,.T.); +#14859 = VERTEX_POINT('',#14860); +#14860 = CARTESIAN_POINT('',(4.68,0.32,1.85)); +#14861 = VERTEX_POINT('',#14862); +#14862 = CARTESIAN_POINT('',(4.68,-0.32,1.85)); +#14863 = LINE('',#14864,#14865); +#14864 = CARTESIAN_POINT('',(4.68,-0.2875,1.85)); +#14865 = VECTOR('',#14866,1.); +#14866 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14867 = ORIENTED_EDGE('',*,*,#14868,.T.); +#14868 = EDGE_CURVE('',#14859,#14869,#14871,.T.); +#14869 = VERTEX_POINT('',#14870); +#14870 = CARTESIAN_POINT('',(5.32,0.32,1.85)); +#14871 = LINE('',#14872,#14873); +#14872 = CARTESIAN_POINT('',(4.535,0.32,1.85)); +#14873 = VECTOR('',#14874,1.); +#14874 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14875 = ORIENTED_EDGE('',*,*,#14876,.T.); +#14876 = EDGE_CURVE('',#14869,#14877,#14879,.T.); +#14877 = VERTEX_POINT('',#14878); +#14878 = CARTESIAN_POINT('',(5.32,-0.32,1.85)); +#14879 = LINE('',#14880,#14881); +#14880 = CARTESIAN_POINT('',(5.32,-0.2875,1.85)); +#14881 = VECTOR('',#14882,1.); +#14882 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14883 = ORIENTED_EDGE('',*,*,#14884,.T.); +#14884 = EDGE_CURVE('',#14877,#14861,#14885,.T.); +#14885 = LINE('',#14886,#14887); +#14886 = CARTESIAN_POINT('',(4.535,-0.32,1.85)); +#14887 = VECTOR('',#14888,1.); +#14888 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14889 = FACE_BOUND('',#14890,.T.); +#14890 = EDGE_LOOP('',(#14891,#14901,#14909,#14917)); +#14891 = ORIENTED_EDGE('',*,*,#14892,.T.); +#14892 = EDGE_CURVE('',#14893,#14895,#14897,.T.); +#14893 = VERTEX_POINT('',#14894); +#14894 = CARTESIAN_POINT('',(7.18,0.32,1.85)); +#14895 = VERTEX_POINT('',#14896); +#14896 = CARTESIAN_POINT('',(7.82,0.32,1.85)); +#14897 = LINE('',#14898,#14899); +#14898 = CARTESIAN_POINT('',(5.785,0.32,1.85)); +#14899 = VECTOR('',#14900,1.); +#14900 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#14901 = ORIENTED_EDGE('',*,*,#14902,.T.); +#14902 = EDGE_CURVE('',#14895,#14903,#14905,.T.); +#14903 = VERTEX_POINT('',#14904); +#14904 = CARTESIAN_POINT('',(7.82,-0.32,1.85)); +#14905 = LINE('',#14906,#14907); +#14906 = CARTESIAN_POINT('',(7.82,-0.26920299558,1.85)); +#14907 = VECTOR('',#14908,1.); +#14908 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14909 = ORIENTED_EDGE('',*,*,#14910,.T.); +#14910 = EDGE_CURVE('',#14903,#14911,#14913,.T.); +#14911 = VERTEX_POINT('',#14912); +#14912 = CARTESIAN_POINT('',(7.18,-0.32,1.85)); +#14913 = LINE('',#14914,#14915); +#14914 = CARTESIAN_POINT('',(5.785,-0.32,1.85)); +#14915 = VECTOR('',#14916,1.); +#14916 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14917 = ORIENTED_EDGE('',*,*,#14918,.F.); +#14918 = EDGE_CURVE('',#14893,#14911,#14919,.T.); +#14919 = LINE('',#14920,#14921); +#14920 = CARTESIAN_POINT('',(7.18,-0.26920299558,1.85)); +#14921 = VECTOR('',#14922,1.); +#14922 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14923 = PLANE('',#14924); +#14924 = AXIS2_PLACEMENT_3D('',#14925,#14926,#14927); +#14925 = CARTESIAN_POINT('',(3.75,-0.575,1.85)); +#14926 = DIRECTION('',(0.,0.,1.)); +#14927 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14928 = ADVANCED_FACE('',(#14929),#14940,.F.); +#14929 = FACE_BOUND('',#14930,.F.); +#14930 = EDGE_LOOP('',(#14931,#14932,#14938,#14939)); +#14931 = ORIENTED_EDGE('',*,*,#14131,.F.); +#14932 = ORIENTED_EDGE('',*,*,#14933,.T.); +#14933 = EDGE_CURVE('',#14124,#13922,#14934,.T.); +#14934 = LINE('',#14935,#14936); +#14935 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#14936 = VECTOR('',#14937,1.); +#14937 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14938 = ORIENTED_EDGE('',*,*,#13929,.F.); +#14939 = ORIENTED_EDGE('',*,*,#13977,.F.); +#14940 = PLANE('',#14941); +#14941 = AXIS2_PLACEMENT_3D('',#14942,#14943,#14944); +#14942 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#14943 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14944 = DIRECTION('',(0.,0.,1.)); +#14945 = ADVANCED_FACE('',(#14946),#14957,.F.); +#14946 = FACE_BOUND('',#14947,.F.); +#14947 = EDGE_LOOP('',(#14948,#14949,#14955,#14956)); +#14948 = ORIENTED_EDGE('',*,*,#14123,.F.); +#14949 = ORIENTED_EDGE('',*,*,#14950,.T.); +#14950 = EDGE_CURVE('',#14116,#13914,#14951,.T.); +#14951 = LINE('',#14952,#14953); +#14952 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#14953 = VECTOR('',#14954,1.); +#14954 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14955 = ORIENTED_EDGE('',*,*,#13921,.F.); +#14956 = ORIENTED_EDGE('',*,*,#14933,.F.); +#14957 = PLANE('',#14958); +#14958 = AXIS2_PLACEMENT_3D('',#14959,#14960,#14961); +#14959 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#14960 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#14961 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#14962 = ADVANCED_FACE('',(#14963),#14974,.F.); +#14963 = FACE_BOUND('',#14964,.F.); +#14964 = EDGE_LOOP('',(#14965,#14966,#14972,#14973)); +#14965 = ORIENTED_EDGE('',*,*,#14115,.F.); +#14966 = ORIENTED_EDGE('',*,*,#14967,.T.); +#14967 = EDGE_CURVE('',#14108,#13906,#14968,.T.); +#14968 = LINE('',#14969,#14970); +#14969 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#14970 = VECTOR('',#14971,1.); +#14971 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14972 = ORIENTED_EDGE('',*,*,#13913,.F.); +#14973 = ORIENTED_EDGE('',*,*,#14950,.F.); +#14974 = PLANE('',#14975); +#14975 = AXIS2_PLACEMENT_3D('',#14976,#14977,#14978); +#14976 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#14977 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#14978 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#14979 = ADVANCED_FACE('',(#14980),#14991,.F.); +#14980 = FACE_BOUND('',#14981,.F.); +#14981 = EDGE_LOOP('',(#14982,#14983,#14989,#14990)); +#14982 = ORIENTED_EDGE('',*,*,#14107,.F.); +#14983 = ORIENTED_EDGE('',*,*,#14984,.T.); +#14984 = EDGE_CURVE('',#14099,#13897,#14985,.T.); +#14985 = LINE('',#14986,#14987); +#14986 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#14987 = VECTOR('',#14988,1.); +#14988 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#14989 = ORIENTED_EDGE('',*,*,#13905,.F.); +#14990 = ORIENTED_EDGE('',*,*,#14967,.F.); +#14991 = PLANE('',#14992); +#14992 = AXIS2_PLACEMENT_3D('',#14993,#14994,#14995); +#14993 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#14994 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#14995 = DIRECTION('',(0.,0.,1.)); +#14996 = ADVANCED_FACE('',(#14997),#15008,.F.); +#14997 = FACE_BOUND('',#14998,.F.); +#14998 = EDGE_LOOP('',(#14999,#15000,#15001,#15002)); +#14999 = ORIENTED_EDGE('',*,*,#13896,.F.); +#15000 = ORIENTED_EDGE('',*,*,#14984,.F.); +#15001 = ORIENTED_EDGE('',*,*,#14098,.F.); +#15002 = ORIENTED_EDGE('',*,*,#15003,.T.); +#15003 = EDGE_CURVE('',#14091,#13889,#15004,.T.); +#15004 = LINE('',#15005,#15006); +#15005 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#15006 = VECTOR('',#15007,1.); +#15007 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15008 = CYLINDRICAL_SURFACE('',#15009,0.75); +#15009 = AXIS2_PLACEMENT_3D('',#15010,#15011,#15012); +#15010 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#15011 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15012 = DIRECTION('',(-0.,0.,-1.)); +#15013 = ADVANCED_FACE('',(#15014),#15025,.F.); +#15014 = FACE_BOUND('',#15015,.F.); +#15015 = EDGE_LOOP('',(#15016,#15017,#15018,#15024)); +#15016 = ORIENTED_EDGE('',*,*,#15003,.F.); +#15017 = ORIENTED_EDGE('',*,*,#14090,.F.); +#15018 = ORIENTED_EDGE('',*,*,#15019,.T.); +#15019 = EDGE_CURVE('',#14083,#13881,#15020,.T.); +#15020 = LINE('',#15021,#15022); +#15021 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#15022 = VECTOR('',#15023,1.); +#15023 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15024 = ORIENTED_EDGE('',*,*,#13888,.F.); +#15025 = PLANE('',#15026); +#15026 = AXIS2_PLACEMENT_3D('',#15027,#15028,#15029); +#15027 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#15028 = DIRECTION('',(-0.,0.,-1.)); +#15029 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15030 = ADVANCED_FACE('',(#15031),#15042,.F.); +#15031 = FACE_BOUND('',#15032,.F.); +#15032 = EDGE_LOOP('',(#15033,#15034,#15040,#15041)); +#15033 = ORIENTED_EDGE('',*,*,#14082,.F.); +#15034 = ORIENTED_EDGE('',*,*,#15035,.T.); +#15035 = EDGE_CURVE('',#14075,#13873,#15036,.T.); +#15036 = LINE('',#15037,#15038); +#15037 = CARTESIAN_POINT('',(1.,2.35,7.)); +#15038 = VECTOR('',#15039,1.); +#15039 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15040 = ORIENTED_EDGE('',*,*,#13880,.F.); +#15041 = ORIENTED_EDGE('',*,*,#15019,.F.); +#15042 = PLANE('',#15043); +#15043 = AXIS2_PLACEMENT_3D('',#15044,#15045,#15046); +#15044 = CARTESIAN_POINT('',(1.,2.35,7.)); +#15045 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15046 = DIRECTION('',(0.,-0.,-1.)); +#15047 = ADVANCED_FACE('',(#15048),#15059,.T.); +#15048 = FACE_BOUND('',#15049,.T.); +#15049 = EDGE_LOOP('',(#15050,#15051,#15057,#15058)); +#15050 = ORIENTED_EDGE('',*,*,#13872,.F.); +#15051 = ORIENTED_EDGE('',*,*,#15052,.F.); +#15052 = EDGE_CURVE('',#14067,#13865,#15053,.T.); +#15053 = LINE('',#15054,#15055); +#15054 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#15055 = VECTOR('',#15056,1.); +#15056 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15057 = ORIENTED_EDGE('',*,*,#14074,.T.); +#15058 = ORIENTED_EDGE('',*,*,#15035,.T.); +#15059 = PLANE('',#15060); +#15060 = AXIS2_PLACEMENT_3D('',#15061,#15062,#15063); +#15061 = CARTESIAN_POINT('',(3.75,-0.525,7.)); +#15062 = DIRECTION('',(0.,0.,1.)); +#15063 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15064 = ADVANCED_FACE('',(#15065),#15076,.T.); +#15065 = FACE_BOUND('',#15066,.T.); +#15066 = EDGE_LOOP('',(#15067,#15068,#15069,#15070)); +#15067 = ORIENTED_EDGE('',*,*,#14066,.F.); +#15068 = ORIENTED_EDGE('',*,*,#15052,.T.); +#15069 = ORIENTED_EDGE('',*,*,#13864,.F.); +#15070 = ORIENTED_EDGE('',*,*,#15071,.F.); +#15071 = EDGE_CURVE('',#14059,#13857,#15072,.T.); +#15072 = LINE('',#15073,#15074); +#15073 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#15074 = VECTOR('',#15075,1.); +#15075 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15076 = PLANE('',#15077); +#15077 = AXIS2_PLACEMENT_3D('',#15078,#15079,#15080); +#15078 = CARTESIAN_POINT('',(6.5,2.35,7.)); +#15079 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15080 = DIRECTION('',(0.,-0.,-1.)); +#15081 = ADVANCED_FACE('',(#15082),#15093,.T.); +#15082 = FACE_BOUND('',#15083,.T.); +#15083 = EDGE_LOOP('',(#15084,#15090,#15091,#15092)); +#15084 = ORIENTED_EDGE('',*,*,#15085,.F.); +#15085 = EDGE_CURVE('',#14050,#13848,#15086,.T.); +#15086 = LINE('',#15087,#15088); +#15087 = CARTESIAN_POINT('',(7.25,2.35,3.1)); +#15088 = VECTOR('',#15089,1.); +#15089 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15090 = ORIENTED_EDGE('',*,*,#14058,.F.); +#15091 = ORIENTED_EDGE('',*,*,#15071,.T.); +#15092 = ORIENTED_EDGE('',*,*,#13856,.F.); +#15093 = PLANE('',#15094); +#15094 = AXIS2_PLACEMENT_3D('',#15095,#15096,#15097); +#15095 = CARTESIAN_POINT('',(6.5,2.35,3.1)); +#15096 = DIRECTION('',(0.,0.,1.)); +#15097 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15098 = ADVANCED_FACE('',(#15099),#15110,.F.); +#15099 = FACE_BOUND('',#15100,.F.); +#15100 = EDGE_LOOP('',(#15101,#15102,#15103,#15109)); +#15101 = ORIENTED_EDGE('',*,*,#15085,.F.); +#15102 = ORIENTED_EDGE('',*,*,#14049,.T.); +#15103 = ORIENTED_EDGE('',*,*,#15104,.T.); +#15104 = EDGE_CURVE('',#14042,#13840,#15105,.T.); +#15105 = LINE('',#15106,#15107); +#15106 = CARTESIAN_POINT('',(8.,2.35,3.85)); +#15107 = VECTOR('',#15108,1.); +#15108 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15109 = ORIENTED_EDGE('',*,*,#13847,.F.); +#15110 = CYLINDRICAL_SURFACE('',#15111,0.75); +#15111 = AXIS2_PLACEMENT_3D('',#15112,#15113,#15114); +#15112 = CARTESIAN_POINT('',(7.25,2.35,3.85)); +#15113 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15114 = DIRECTION('',(0.,-0.,-1.)); +#15115 = ADVANCED_FACE('',(#15116),#15127,.T.); +#15116 = FACE_BOUND('',#15117,.T.); +#15117 = EDGE_LOOP('',(#15118,#15119,#15120,#15121)); +#15118 = ORIENTED_EDGE('',*,*,#14041,.F.); +#15119 = ORIENTED_EDGE('',*,*,#15104,.T.); +#15120 = ORIENTED_EDGE('',*,*,#13839,.F.); +#15121 = ORIENTED_EDGE('',*,*,#15122,.F.); +#15122 = EDGE_CURVE('',#14034,#13832,#15123,.T.); +#15123 = LINE('',#15124,#15125); +#15124 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#15125 = VECTOR('',#15126,1.); +#15126 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15127 = PLANE('',#15128); +#15128 = AXIS2_PLACEMENT_3D('',#15129,#15130,#15131); +#15129 = CARTESIAN_POINT('',(8.,2.35,3.1)); +#15130 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15131 = DIRECTION('',(0.,0.,1.)); +#15132 = ADVANCED_FACE('',(#15133),#15144,.T.); +#15133 = FACE_BOUND('',#15134,.T.); +#15134 = EDGE_LOOP('',(#15135,#15136,#15137,#15138)); +#15135 = ORIENTED_EDGE('',*,*,#14033,.F.); +#15136 = ORIENTED_EDGE('',*,*,#15122,.T.); +#15137 = ORIENTED_EDGE('',*,*,#13831,.F.); +#15138 = ORIENTED_EDGE('',*,*,#15139,.F.); +#15139 = EDGE_CURVE('',#14026,#13824,#15140,.T.); +#15140 = LINE('',#15141,#15142); +#15141 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#15142 = VECTOR('',#15143,1.); +#15143 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15144 = PLANE('',#15145); +#15145 = AXIS2_PLACEMENT_3D('',#15146,#15147,#15148); +#15146 = CARTESIAN_POINT('',(8.,2.35,5.6)); +#15147 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#15148 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#15149 = ADVANCED_FACE('',(#15150),#15161,.T.); +#15150 = FACE_BOUND('',#15151,.T.); +#15151 = EDGE_LOOP('',(#15152,#15153,#15154,#15155)); +#15152 = ORIENTED_EDGE('',*,*,#14025,.F.); +#15153 = ORIENTED_EDGE('',*,*,#15139,.T.); +#15154 = ORIENTED_EDGE('',*,*,#13823,.F.); +#15155 = ORIENTED_EDGE('',*,*,#15156,.F.); +#15156 = EDGE_CURVE('',#14018,#13816,#15157,.T.); +#15157 = LINE('',#15158,#15159); +#15158 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#15159 = VECTOR('',#15160,1.); +#15160 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15161 = PLANE('',#15162); +#15162 = AXIS2_PLACEMENT_3D('',#15163,#15164,#15165); +#15163 = CARTESIAN_POINT('',(7.75,2.35,5.85)); +#15164 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#15165 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#15166 = ADVANCED_FACE('',(#15167),#15173,.T.); +#15167 = FACE_BOUND('',#15168,.T.); +#15168 = EDGE_LOOP('',(#15169,#15170,#15171,#15172)); +#15169 = ORIENTED_EDGE('',*,*,#14017,.F.); +#15170 = ORIENTED_EDGE('',*,*,#15156,.T.); +#15171 = ORIENTED_EDGE('',*,*,#13815,.F.); +#15172 = ORIENTED_EDGE('',*,*,#14741,.F.); +#15173 = PLANE('',#15174); +#15174 = AXIS2_PLACEMENT_3D('',#15175,#15176,#15177); +#15175 = CARTESIAN_POINT('',(8.,2.35,6.1)); +#15176 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15177 = DIRECTION('',(0.,0.,1.)); +#15178 = ADVANCED_FACE('',(#15179),#15190,.F.); +#15179 = FACE_BOUND('',#15180,.F.); +#15180 = EDGE_LOOP('',(#15181,#15182,#15183,#15189)); +#15181 = ORIENTED_EDGE('',*,*,#14244,.T.); +#15182 = ORIENTED_EDGE('',*,*,#14606,.T.); +#15183 = ORIENTED_EDGE('',*,*,#15184,.F.); +#15184 = EDGE_CURVE('',#14664,#14607,#15185,.T.); +#15185 = LINE('',#15186,#15187); +#15186 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#15187 = VECTOR('',#15188,1.); +#15188 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15189 = ORIENTED_EDGE('',*,*,#14663,.F.); +#15190 = PLANE('',#15191); +#15191 = AXIS2_PLACEMENT_3D('',#15192,#15193,#15194); +#15192 = CARTESIAN_POINT('',(8.25,2.35,1.)); +#15193 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#15194 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#15195 = ADVANCED_FACE('',(#15196),#15207,.F.); +#15196 = FACE_BOUND('',#15197,.F.); +#15197 = EDGE_LOOP('',(#15198,#15199,#15200,#15206)); +#15198 = ORIENTED_EDGE('',*,*,#14212,.T.); +#15199 = ORIENTED_EDGE('',*,*,#14501,.T.); +#15200 = ORIENTED_EDGE('',*,*,#15201,.F.); +#15201 = EDGE_CURVE('',#14559,#14502,#15202,.T.); +#15202 = LINE('',#15203,#15204); +#15203 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#15204 = VECTOR('',#15205,1.); +#15205 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15206 = ORIENTED_EDGE('',*,*,#14558,.F.); +#15207 = PLANE('',#15208); +#15208 = AXIS2_PLACEMENT_3D('',#15209,#15210,#15211); +#15209 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#15210 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#15211 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#15212 = ADVANCED_FACE('',(#15213),#15224,.F.); +#15213 = FACE_BOUND('',#15214,.F.); +#15214 = EDGE_LOOP('',(#15215,#15216,#15217,#15223)); +#15215 = ORIENTED_EDGE('',*,*,#14180,.T.); +#15216 = ORIENTED_EDGE('',*,*,#14396,.T.); +#15217 = ORIENTED_EDGE('',*,*,#15218,.F.); +#15218 = EDGE_CURVE('',#14454,#14397,#15219,.T.); +#15219 = LINE('',#15220,#15221); +#15220 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#15221 = VECTOR('',#15222,1.); +#15222 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15223 = ORIENTED_EDGE('',*,*,#14453,.F.); +#15224 = PLANE('',#15225); +#15225 = AXIS2_PLACEMENT_3D('',#15226,#15227,#15228); +#15226 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#15227 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#15228 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#15229 = ADVANCED_FACE('',(#15230),#15241,.F.); +#15230 = FACE_BOUND('',#15231,.F.); +#15231 = EDGE_LOOP('',(#15232,#15233,#15234,#15240)); +#15232 = ORIENTED_EDGE('',*,*,#14148,.T.); +#15233 = ORIENTED_EDGE('',*,*,#14291,.T.); +#15234 = ORIENTED_EDGE('',*,*,#15235,.F.); +#15235 = EDGE_CURVE('',#14349,#14292,#15236,.T.); +#15236 = LINE('',#15237,#15238); +#15237 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#15238 = VECTOR('',#15239,1.); +#15239 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15240 = ORIENTED_EDGE('',*,*,#14348,.F.); +#15241 = PLANE('',#15242); +#15242 = AXIS2_PLACEMENT_3D('',#15243,#15244,#15245); +#15243 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#15244 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#15245 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#15246 = ADVANCED_FACE('',(#15247,#15253),#15287,.F.); +#15247 = FACE_BOUND('',#15248,.F.); +#15248 = EDGE_LOOP('',(#15249,#15250,#15251,#15252)); +#15249 = ORIENTED_EDGE('',*,*,#15235,.T.); +#15250 = ORIENTED_EDGE('',*,*,#14299,.T.); +#15251 = ORIENTED_EDGE('',*,*,#14323,.F.); +#15252 = ORIENTED_EDGE('',*,*,#14356,.F.); +#15253 = FACE_BOUND('',#15254,.F.); +#15254 = EDGE_LOOP('',(#15255,#15265,#15273,#15281)); +#15255 = ORIENTED_EDGE('',*,*,#15256,.F.); +#15256 = EDGE_CURVE('',#15257,#15259,#15261,.T.); +#15257 = VERTEX_POINT('',#15258); +#15258 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#15259 = VERTEX_POINT('',#15260); +#15260 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#15261 = LINE('',#15262,#15263); +#15262 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#15263 = VECTOR('',#15264,1.); +#15264 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15265 = ORIENTED_EDGE('',*,*,#15266,.T.); +#15266 = EDGE_CURVE('',#15257,#15267,#15269,.T.); +#15267 = VERTEX_POINT('',#15268); +#15268 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#15269 = LINE('',#15270,#15271); +#15270 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#15271 = VECTOR('',#15272,1.); +#15272 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15273 = ORIENTED_EDGE('',*,*,#15274,.T.); +#15274 = EDGE_CURVE('',#15267,#15275,#15277,.T.); +#15275 = VERTEX_POINT('',#15276); +#15276 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#15277 = LINE('',#15278,#15279); +#15278 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#15279 = VECTOR('',#15280,1.); +#15280 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15281 = ORIENTED_EDGE('',*,*,#15282,.T.); +#15282 = EDGE_CURVE('',#15275,#15259,#15283,.T.); +#15283 = LINE('',#15284,#15285); +#15284 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#15285 = VECTOR('',#15286,1.); +#15286 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15287 = PLANE('',#15288); +#15288 = AXIS2_PLACEMENT_3D('',#15289,#15290,#15291); +#15289 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#15290 = DIRECTION('',(0.,0.,1.)); +#15291 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15292 = ADVANCED_FACE('',(#15293,#15299),#15333,.F.); +#15293 = FACE_BOUND('',#15294,.F.); +#15294 = EDGE_LOOP('',(#15295,#15296,#15297,#15298)); +#15295 = ORIENTED_EDGE('',*,*,#15218,.T.); +#15296 = ORIENTED_EDGE('',*,*,#14404,.T.); +#15297 = ORIENTED_EDGE('',*,*,#14428,.F.); +#15298 = ORIENTED_EDGE('',*,*,#14461,.F.); +#15299 = FACE_BOUND('',#15300,.F.); +#15300 = EDGE_LOOP('',(#15301,#15311,#15319,#15327)); +#15301 = ORIENTED_EDGE('',*,*,#15302,.T.); +#15302 = EDGE_CURVE('',#15303,#15305,#15307,.T.); +#15303 = VERTEX_POINT('',#15304); +#15304 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#15305 = VERTEX_POINT('',#15306); +#15306 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#15307 = LINE('',#15308,#15309); +#15308 = CARTESIAN_POINT('',(2.82,0.25,0.3)); +#15309 = VECTOR('',#15310,1.); +#15310 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15311 = ORIENTED_EDGE('',*,*,#15312,.T.); +#15312 = EDGE_CURVE('',#15305,#15313,#15315,.T.); +#15313 = VERTEX_POINT('',#15314); +#15314 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#15315 = LINE('',#15316,#15317); +#15316 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#15317 = VECTOR('',#15318,1.); +#15318 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15319 = ORIENTED_EDGE('',*,*,#15320,.F.); +#15320 = EDGE_CURVE('',#15321,#15313,#15323,.T.); +#15321 = VERTEX_POINT('',#15322); +#15322 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#15323 = LINE('',#15324,#15325); +#15324 = CARTESIAN_POINT('',(2.18,0.25,0.3)); +#15325 = VECTOR('',#15326,1.); +#15326 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15327 = ORIENTED_EDGE('',*,*,#15328,.T.); +#15328 = EDGE_CURVE('',#15321,#15303,#15329,.T.); +#15329 = LINE('',#15330,#15331); +#15330 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#15331 = VECTOR('',#15332,1.); +#15332 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15333 = PLANE('',#15334); +#15334 = AXIS2_PLACEMENT_3D('',#15335,#15336,#15337); +#15335 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#15336 = DIRECTION('',(0.,0.,1.)); +#15337 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15338 = ADVANCED_FACE('',(#15339,#15345),#15379,.F.); +#15339 = FACE_BOUND('',#15340,.F.); +#15340 = EDGE_LOOP('',(#15341,#15342,#15343,#15344)); +#15341 = ORIENTED_EDGE('',*,*,#15201,.T.); +#15342 = ORIENTED_EDGE('',*,*,#14509,.T.); +#15343 = ORIENTED_EDGE('',*,*,#14533,.F.); +#15344 = ORIENTED_EDGE('',*,*,#14566,.F.); +#15345 = FACE_BOUND('',#15346,.F.); +#15346 = EDGE_LOOP('',(#15347,#15357,#15365,#15373)); +#15347 = ORIENTED_EDGE('',*,*,#15348,.F.); +#15348 = EDGE_CURVE('',#15349,#15351,#15353,.T.); +#15349 = VERTEX_POINT('',#15350); +#15350 = CARTESIAN_POINT('',(4.68,0.32,0.3)); +#15351 = VERTEX_POINT('',#15352); +#15352 = CARTESIAN_POINT('',(4.68,-0.32,0.3)); +#15353 = LINE('',#15354,#15355); +#15354 = CARTESIAN_POINT('',(4.68,0.25,0.3)); +#15355 = VECTOR('',#15356,1.); +#15356 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15357 = ORIENTED_EDGE('',*,*,#15358,.T.); +#15358 = EDGE_CURVE('',#15349,#15359,#15361,.T.); +#15359 = VERTEX_POINT('',#15360); +#15360 = CARTESIAN_POINT('',(5.32,0.32,0.3)); +#15361 = LINE('',#15362,#15363); +#15362 = CARTESIAN_POINT('',(5.535,0.32,0.3)); +#15363 = VECTOR('',#15364,1.); +#15364 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15365 = ORIENTED_EDGE('',*,*,#15366,.T.); +#15366 = EDGE_CURVE('',#15359,#15367,#15369,.T.); +#15367 = VERTEX_POINT('',#15368); +#15368 = CARTESIAN_POINT('',(5.32,-0.32,0.3)); +#15369 = LINE('',#15370,#15371); +#15370 = CARTESIAN_POINT('',(5.32,0.25,0.3)); +#15371 = VECTOR('',#15372,1.); +#15372 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15373 = ORIENTED_EDGE('',*,*,#15374,.T.); +#15374 = EDGE_CURVE('',#15367,#15351,#15375,.T.); +#15375 = LINE('',#15376,#15377); +#15376 = CARTESIAN_POINT('',(5.535,-0.32,0.3)); +#15377 = VECTOR('',#15378,1.); +#15378 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15379 = PLANE('',#15380); +#15380 = AXIS2_PLACEMENT_3D('',#15381,#15382,#15383); +#15381 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#15382 = DIRECTION('',(0.,0.,1.)); +#15383 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15384 = ADVANCED_FACE('',(#15385,#15391),#15425,.F.); +#15385 = FACE_BOUND('',#15386,.F.); +#15386 = EDGE_LOOP('',(#15387,#15388,#15389,#15390)); +#15387 = ORIENTED_EDGE('',*,*,#15184,.T.); +#15388 = ORIENTED_EDGE('',*,*,#14614,.T.); +#15389 = ORIENTED_EDGE('',*,*,#14638,.F.); +#15390 = ORIENTED_EDGE('',*,*,#14671,.F.); +#15391 = FACE_BOUND('',#15392,.F.); +#15392 = EDGE_LOOP('',(#15393,#15403,#15411,#15419)); +#15393 = ORIENTED_EDGE('',*,*,#15394,.T.); +#15394 = EDGE_CURVE('',#15395,#15397,#15399,.T.); +#15395 = VERTEX_POINT('',#15396); +#15396 = CARTESIAN_POINT('',(7.18,0.32,0.3)); +#15397 = VERTEX_POINT('',#15398); +#15398 = CARTESIAN_POINT('',(7.82,0.32,0.3)); +#15399 = LINE('',#15400,#15401); +#15400 = CARTESIAN_POINT('',(8.035,0.32,0.3)); +#15401 = VECTOR('',#15402,1.); +#15402 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#15403 = ORIENTED_EDGE('',*,*,#15404,.T.); +#15404 = EDGE_CURVE('',#15397,#15405,#15407,.T.); +#15405 = VERTEX_POINT('',#15406); +#15406 = CARTESIAN_POINT('',(7.82,-0.32,0.3)); +#15407 = LINE('',#15408,#15409); +#15408 = CARTESIAN_POINT('',(7.82,0.26829700442,0.3)); +#15409 = VECTOR('',#15410,1.); +#15410 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15411 = ORIENTED_EDGE('',*,*,#15412,.T.); +#15412 = EDGE_CURVE('',#15405,#15413,#15415,.T.); +#15413 = VERTEX_POINT('',#15414); +#15414 = CARTESIAN_POINT('',(7.18,-0.32,0.3)); +#15415 = LINE('',#15416,#15417); +#15416 = CARTESIAN_POINT('',(8.035,-0.32,0.3)); +#15417 = VECTOR('',#15418,1.); +#15418 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15419 = ORIENTED_EDGE('',*,*,#15420,.F.); +#15420 = EDGE_CURVE('',#15395,#15413,#15421,.T.); +#15421 = LINE('',#15422,#15423); +#15422 = CARTESIAN_POINT('',(7.18,0.26829700442,0.3)); +#15423 = VECTOR('',#15424,1.); +#15424 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15425 = PLANE('',#15426); +#15426 = AXIS2_PLACEMENT_3D('',#15427,#15428,#15429); +#15427 = CARTESIAN_POINT('',(8.25,0.5,0.3)); +#15428 = DIRECTION('',(0.,0.,1.)); +#15429 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15430 = ADVANCED_FACE('',(#15431),#15456,.T.); +#15431 = FACE_BOUND('',#15432,.T.); +#15432 = EDGE_LOOP('',(#15433,#15434,#15442,#15450)); +#15433 = ORIENTED_EDGE('',*,*,#14790,.T.); +#15434 = ORIENTED_EDGE('',*,*,#15435,.T.); +#15435 = EDGE_CURVE('',#14793,#15436,#15438,.T.); +#15436 = VERTEX_POINT('',#15437); +#15437 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#15438 = LINE('',#15439,#15440); +#15439 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#15440 = VECTOR('',#15441,1.); +#15441 = DIRECTION('',(0.,0.,1.)); +#15442 = ORIENTED_EDGE('',*,*,#15443,.T.); +#15443 = EDGE_CURVE('',#15436,#15444,#15446,.T.); +#15444 = VERTEX_POINT('',#15445); +#15445 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#15446 = LINE('',#15447,#15448); +#15447 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#15448 = VECTOR('',#15449,1.); +#15449 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15450 = ORIENTED_EDGE('',*,*,#15451,.T.); +#15451 = EDGE_CURVE('',#15444,#14791,#15452,.T.); +#15452 = LINE('',#15453,#15454); +#15453 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#15454 = VECTOR('',#15455,1.); +#15455 = DIRECTION('',(-0.,0.,-1.)); +#15456 = PLANE('',#15457); +#15457 = AXIS2_PLACEMENT_3D('',#15458,#15459,#15460); +#15458 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#15459 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15460 = DIRECTION('',(0.,0.,1.)); +#15461 = ADVANCED_FACE('',(#15462),#15480,.F.); +#15462 = FACE_BOUND('',#15463,.F.); +#15463 = EDGE_LOOP('',(#15464,#15472,#15473,#15474)); +#15464 = ORIENTED_EDGE('',*,*,#15465,.F.); +#15465 = EDGE_CURVE('',#14809,#15466,#15468,.T.); +#15466 = VERTEX_POINT('',#15467); +#15467 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#15468 = LINE('',#15469,#15470); +#15469 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#15470 = VECTOR('',#15471,1.); +#15471 = DIRECTION('',(0.,0.,1.)); +#15472 = ORIENTED_EDGE('',*,*,#14816,.T.); +#15473 = ORIENTED_EDGE('',*,*,#15435,.T.); +#15474 = ORIENTED_EDGE('',*,*,#15475,.F.); +#15475 = EDGE_CURVE('',#15466,#15436,#15476,.T.); +#15476 = LINE('',#15477,#15478); +#15477 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#15478 = VECTOR('',#15479,1.); +#15479 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15480 = PLANE('',#15481); +#15481 = AXIS2_PLACEMENT_3D('',#15482,#15483,#15484); +#15482 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#15483 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15484 = DIRECTION('',(0.,-0.,1.)); +#15485 = ADVANCED_FACE('',(#15486),#15504,.F.); +#15486 = FACE_BOUND('',#15487,.F.); +#15487 = EDGE_LOOP('',(#15488,#15489,#15490,#15498)); +#15488 = ORIENTED_EDGE('',*,*,#14808,.T.); +#15489 = ORIENTED_EDGE('',*,*,#15465,.T.); +#15490 = ORIENTED_EDGE('',*,*,#15491,.T.); +#15491 = EDGE_CURVE('',#15466,#15492,#15494,.T.); +#15492 = VERTEX_POINT('',#15493); +#15493 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#15494 = LINE('',#15495,#15496); +#15495 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#15496 = VECTOR('',#15497,1.); +#15497 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15498 = ORIENTED_EDGE('',*,*,#15499,.T.); +#15499 = EDGE_CURVE('',#15492,#14801,#15500,.T.); +#15500 = LINE('',#15501,#15502); +#15501 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#15502 = VECTOR('',#15503,1.); +#15503 = DIRECTION('',(-0.,0.,-1.)); +#15504 = PLANE('',#15505); +#15505 = AXIS2_PLACEMENT_3D('',#15506,#15507,#15508); +#15506 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#15507 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15508 = DIRECTION('',(0.,0.,1.)); +#15509 = ADVANCED_FACE('',(#15510),#15521,.F.); +#15510 = FACE_BOUND('',#15511,.F.); +#15511 = EDGE_LOOP('',(#15512,#15513,#15519,#15520)); +#15512 = ORIENTED_EDGE('',*,*,#15499,.F.); +#15513 = ORIENTED_EDGE('',*,*,#15514,.T.); +#15514 = EDGE_CURVE('',#15492,#15444,#15515,.T.); +#15515 = LINE('',#15516,#15517); +#15516 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#15517 = VECTOR('',#15518,1.); +#15518 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15519 = ORIENTED_EDGE('',*,*,#15451,.T.); +#15520 = ORIENTED_EDGE('',*,*,#14800,.T.); +#15521 = PLANE('',#15522); +#15522 = AXIS2_PLACEMENT_3D('',#15523,#15524,#15525); +#15523 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#15524 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15525 = DIRECTION('',(-0.,0.,-1.)); +#15526 = ADVANCED_FACE('',(#15527),#15552,.F.); +#15527 = FACE_BOUND('',#15528,.F.); +#15528 = EDGE_LOOP('',(#15529,#15530,#15538,#15546)); +#15529 = ORIENTED_EDGE('',*,*,#14824,.T.); +#15530 = ORIENTED_EDGE('',*,*,#15531,.T.); +#15531 = EDGE_CURVE('',#14827,#15532,#15534,.T.); +#15532 = VERTEX_POINT('',#15533); +#15533 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#15534 = LINE('',#15535,#15536); +#15535 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#15536 = VECTOR('',#15537,1.); +#15537 = DIRECTION('',(0.,0.,1.)); +#15538 = ORIENTED_EDGE('',*,*,#15539,.T.); +#15539 = EDGE_CURVE('',#15532,#15540,#15542,.T.); +#15540 = VERTEX_POINT('',#15541); +#15541 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#15542 = LINE('',#15543,#15544); +#15543 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#15544 = VECTOR('',#15545,1.); +#15545 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15546 = ORIENTED_EDGE('',*,*,#15547,.T.); +#15547 = EDGE_CURVE('',#15540,#14825,#15548,.T.); +#15548 = LINE('',#15549,#15550); +#15549 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#15550 = VECTOR('',#15551,1.); +#15551 = DIRECTION('',(-0.,0.,-1.)); +#15552 = PLANE('',#15553); +#15553 = AXIS2_PLACEMENT_3D('',#15554,#15555,#15556); +#15554 = CARTESIAN_POINT('',(2.82,1.138921523207E-16,1.55)); +#15555 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15556 = DIRECTION('',(0.,0.,1.)); +#15557 = ADVANCED_FACE('',(#15558),#15576,.F.); +#15558 = FACE_BOUND('',#15559,.F.); +#15559 = EDGE_LOOP('',(#15560,#15561,#15569,#15575)); +#15560 = ORIENTED_EDGE('',*,*,#15547,.F.); +#15561 = ORIENTED_EDGE('',*,*,#15562,.T.); +#15562 = EDGE_CURVE('',#15540,#15563,#15565,.T.); +#15563 = VERTEX_POINT('',#15564); +#15564 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#15565 = LINE('',#15566,#15567); +#15566 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#15567 = VECTOR('',#15568,1.); +#15568 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15569 = ORIENTED_EDGE('',*,*,#15570,.T.); +#15570 = EDGE_CURVE('',#15563,#14843,#15571,.T.); +#15571 = LINE('',#15572,#15573); +#15572 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#15573 = VECTOR('',#15574,1.); +#15574 = DIRECTION('',(-0.,0.,-1.)); +#15575 = ORIENTED_EDGE('',*,*,#14850,.T.); +#15576 = PLANE('',#15577); +#15577 = AXIS2_PLACEMENT_3D('',#15578,#15579,#15580); +#15578 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#15579 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15580 = DIRECTION('',(-0.,0.,-1.)); +#15581 = ADVANCED_FACE('',(#15582),#15600,.T.); +#15582 = FACE_BOUND('',#15583,.T.); +#15583 = EDGE_LOOP('',(#15584,#15585,#15593,#15599)); +#15584 = ORIENTED_EDGE('',*,*,#14842,.T.); +#15585 = ORIENTED_EDGE('',*,*,#15586,.T.); +#15586 = EDGE_CURVE('',#14835,#15587,#15589,.T.); +#15587 = VERTEX_POINT('',#15588); +#15588 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#15589 = LINE('',#15590,#15591); +#15590 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#15591 = VECTOR('',#15592,1.); +#15592 = DIRECTION('',(0.,0.,1.)); +#15593 = ORIENTED_EDGE('',*,*,#15594,.T.); +#15594 = EDGE_CURVE('',#15587,#15563,#15595,.T.); +#15595 = LINE('',#15596,#15597); +#15596 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#15597 = VECTOR('',#15598,1.); +#15598 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15599 = ORIENTED_EDGE('',*,*,#15570,.T.); +#15600 = PLANE('',#15601); +#15601 = AXIS2_PLACEMENT_3D('',#15602,#15603,#15604); +#15602 = CARTESIAN_POINT('',(2.18,1.922695474661E-16,1.55)); +#15603 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15604 = DIRECTION('',(0.,0.,1.)); +#15605 = ADVANCED_FACE('',(#15606),#15617,.F.); +#15606 = FACE_BOUND('',#15607,.F.); +#15607 = EDGE_LOOP('',(#15608,#15609,#15610,#15611)); +#15608 = ORIENTED_EDGE('',*,*,#15531,.F.); +#15609 = ORIENTED_EDGE('',*,*,#14834,.T.); +#15610 = ORIENTED_EDGE('',*,*,#15586,.T.); +#15611 = ORIENTED_EDGE('',*,*,#15612,.F.); +#15612 = EDGE_CURVE('',#15532,#15587,#15613,.T.); +#15613 = LINE('',#15614,#15615); +#15614 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#15615 = VECTOR('',#15616,1.); +#15616 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15617 = PLANE('',#15618); +#15618 = AXIS2_PLACEMENT_3D('',#15619,#15620,#15621); +#15619 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#15620 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15621 = DIRECTION('',(0.,-0.,1.)); +#15622 = ADVANCED_FACE('',(#15623),#15648,.T.); +#15623 = FACE_BOUND('',#15624,.T.); +#15624 = EDGE_LOOP('',(#15625,#15626,#15634,#15642)); +#15625 = ORIENTED_EDGE('',*,*,#14858,.T.); +#15626 = ORIENTED_EDGE('',*,*,#15627,.T.); +#15627 = EDGE_CURVE('',#14861,#15628,#15630,.T.); +#15628 = VERTEX_POINT('',#15629); +#15629 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#15630 = LINE('',#15631,#15632); +#15631 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#15632 = VECTOR('',#15633,1.); +#15633 = DIRECTION('',(0.,0.,1.)); +#15634 = ORIENTED_EDGE('',*,*,#15635,.T.); +#15635 = EDGE_CURVE('',#15628,#15636,#15638,.T.); +#15636 = VERTEX_POINT('',#15637); +#15637 = CARTESIAN_POINT('',(4.68,0.32,6.3)); +#15638 = LINE('',#15639,#15640); +#15639 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#15640 = VECTOR('',#15641,1.); +#15641 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15642 = ORIENTED_EDGE('',*,*,#15643,.T.); +#15643 = EDGE_CURVE('',#15636,#14859,#15644,.T.); +#15644 = LINE('',#15645,#15646); +#15645 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#15646 = VECTOR('',#15647,1.); +#15647 = DIRECTION('',(-0.,0.,-1.)); +#15648 = PLANE('',#15649); +#15649 = AXIS2_PLACEMENT_3D('',#15650,#15651,#15652); +#15650 = CARTESIAN_POINT('',(4.68,-1.138921523207E-16,1.55)); +#15651 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15652 = DIRECTION('',(0.,0.,1.)); +#15653 = ADVANCED_FACE('',(#15654),#15672,.F.); +#15654 = FACE_BOUND('',#15655,.F.); +#15655 = EDGE_LOOP('',(#15656,#15664,#15665,#15666)); +#15656 = ORIENTED_EDGE('',*,*,#15657,.F.); +#15657 = EDGE_CURVE('',#14877,#15658,#15660,.T.); +#15658 = VERTEX_POINT('',#15659); +#15659 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#15660 = LINE('',#15661,#15662); +#15661 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#15662 = VECTOR('',#15663,1.); +#15663 = DIRECTION('',(0.,0.,1.)); +#15664 = ORIENTED_EDGE('',*,*,#14884,.T.); +#15665 = ORIENTED_EDGE('',*,*,#15627,.T.); +#15666 = ORIENTED_EDGE('',*,*,#15667,.F.); +#15667 = EDGE_CURVE('',#15658,#15628,#15668,.T.); +#15668 = LINE('',#15669,#15670); +#15669 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#15670 = VECTOR('',#15671,1.); +#15671 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15672 = PLANE('',#15673); +#15673 = AXIS2_PLACEMENT_3D('',#15674,#15675,#15676); +#15674 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#15675 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15676 = DIRECTION('',(0.,-0.,1.)); +#15677 = ADVANCED_FACE('',(#15678),#15696,.F.); +#15678 = FACE_BOUND('',#15679,.F.); +#15679 = EDGE_LOOP('',(#15680,#15681,#15682,#15690)); +#15680 = ORIENTED_EDGE('',*,*,#14876,.T.); +#15681 = ORIENTED_EDGE('',*,*,#15657,.T.); +#15682 = ORIENTED_EDGE('',*,*,#15683,.T.); +#15683 = EDGE_CURVE('',#15658,#15684,#15686,.T.); +#15684 = VERTEX_POINT('',#15685); +#15685 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#15686 = LINE('',#15687,#15688); +#15687 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#15688 = VECTOR('',#15689,1.); +#15689 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15690 = ORIENTED_EDGE('',*,*,#15691,.T.); +#15691 = EDGE_CURVE('',#15684,#14869,#15692,.T.); +#15692 = LINE('',#15693,#15694); +#15693 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#15694 = VECTOR('',#15695,1.); +#15695 = DIRECTION('',(-0.,0.,-1.)); +#15696 = PLANE('',#15697); +#15697 = AXIS2_PLACEMENT_3D('',#15698,#15699,#15700); +#15698 = CARTESIAN_POINT('',(5.32,-1.922695474661E-16,1.55)); +#15699 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15700 = DIRECTION('',(0.,0.,1.)); +#15701 = ADVANCED_FACE('',(#15702),#15713,.F.); +#15702 = FACE_BOUND('',#15703,.F.); +#15703 = EDGE_LOOP('',(#15704,#15705,#15711,#15712)); +#15704 = ORIENTED_EDGE('',*,*,#15691,.F.); +#15705 = ORIENTED_EDGE('',*,*,#15706,.T.); +#15706 = EDGE_CURVE('',#15684,#15636,#15707,.T.); +#15707 = LINE('',#15708,#15709); +#15708 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#15709 = VECTOR('',#15710,1.); +#15710 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15711 = ORIENTED_EDGE('',*,*,#15643,.T.); +#15712 = ORIENTED_EDGE('',*,*,#14868,.T.); +#15713 = PLANE('',#15714); +#15714 = AXIS2_PLACEMENT_3D('',#15715,#15716,#15717); +#15715 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#15716 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15717 = DIRECTION('',(-0.,0.,-1.)); +#15718 = ADVANCED_FACE('',(#15719),#15744,.F.); +#15719 = FACE_BOUND('',#15720,.F.); +#15720 = EDGE_LOOP('',(#15721,#15729,#15737,#15743)); +#15721 = ORIENTED_EDGE('',*,*,#15722,.F.); +#15722 = EDGE_CURVE('',#15723,#14895,#15725,.T.); +#15723 = VERTEX_POINT('',#15724); +#15724 = CARTESIAN_POINT('',(7.82,0.32,6.3)); +#15725 = LINE('',#15726,#15727); +#15726 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#15727 = VECTOR('',#15728,1.); +#15728 = DIRECTION('',(-0.,0.,-1.)); +#15729 = ORIENTED_EDGE('',*,*,#15730,.T.); +#15730 = EDGE_CURVE('',#15723,#15731,#15733,.T.); +#15731 = VERTEX_POINT('',#15732); +#15732 = CARTESIAN_POINT('',(7.18,0.32,6.3)); +#15733 = LINE('',#15734,#15735); +#15734 = CARTESIAN_POINT('',(7.82,0.32,6.3)); +#15735 = VECTOR('',#15736,1.); +#15736 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15737 = ORIENTED_EDGE('',*,*,#15738,.T.); +#15738 = EDGE_CURVE('',#15731,#14893,#15739,.T.); +#15739 = LINE('',#15740,#15741); +#15740 = CARTESIAN_POINT('',(7.18,0.32,6.5)); +#15741 = VECTOR('',#15742,1.); +#15742 = DIRECTION('',(-0.,0.,-1.)); +#15743 = ORIENTED_EDGE('',*,*,#14892,.T.); +#15744 = PLANE('',#15745); +#15745 = AXIS2_PLACEMENT_3D('',#15746,#15747,#15748); +#15746 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#15747 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15748 = DIRECTION('',(-0.,0.,-1.)); +#15749 = ADVANCED_FACE('',(#15750),#15768,.T.); +#15750 = FACE_BOUND('',#15751,.T.); +#15751 = EDGE_LOOP('',(#15752,#15753,#15761,#15767)); +#15752 = ORIENTED_EDGE('',*,*,#14918,.T.); +#15753 = ORIENTED_EDGE('',*,*,#15754,.T.); +#15754 = EDGE_CURVE('',#14911,#15755,#15757,.T.); +#15755 = VERTEX_POINT('',#15756); +#15756 = CARTESIAN_POINT('',(7.18,-0.32,6.3)); +#15757 = LINE('',#15758,#15759); +#15758 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#15759 = VECTOR('',#15760,1.); +#15760 = DIRECTION('',(0.,0.,1.)); +#15761 = ORIENTED_EDGE('',*,*,#15762,.T.); +#15762 = EDGE_CURVE('',#15755,#15731,#15763,.T.); +#15763 = LINE('',#15764,#15765); +#15764 = CARTESIAN_POINT('',(7.18,-0.32,6.3)); +#15765 = VECTOR('',#15766,1.); +#15766 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15767 = ORIENTED_EDGE('',*,*,#15738,.T.); +#15768 = PLANE('',#15769); +#15769 = AXIS2_PLACEMENT_3D('',#15770,#15771,#15772); +#15770 = CARTESIAN_POINT('',(7.18,3.65940088399E-02,1.522832428212)); +#15771 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15772 = DIRECTION('',(0.,0.,1.)); +#15773 = ADVANCED_FACE('',(#15774),#15792,.F.); +#15774 = FACE_BOUND('',#15775,.F.); +#15775 = EDGE_LOOP('',(#15776,#15784,#15785,#15786)); +#15776 = ORIENTED_EDGE('',*,*,#15777,.F.); +#15777 = EDGE_CURVE('',#14903,#15778,#15780,.T.); +#15778 = VERTEX_POINT('',#15779); +#15779 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#15780 = LINE('',#15781,#15782); +#15781 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#15782 = VECTOR('',#15783,1.); +#15783 = DIRECTION('',(0.,0.,1.)); +#15784 = ORIENTED_EDGE('',*,*,#14910,.T.); +#15785 = ORIENTED_EDGE('',*,*,#15754,.T.); +#15786 = ORIENTED_EDGE('',*,*,#15787,.F.); +#15787 = EDGE_CURVE('',#15778,#15755,#15788,.T.); +#15788 = LINE('',#15789,#15790); +#15789 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#15790 = VECTOR('',#15791,1.); +#15791 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15792 = PLANE('',#15793); +#15793 = AXIS2_PLACEMENT_3D('',#15794,#15795,#15796); +#15794 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#15795 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15796 = DIRECTION('',(0.,-0.,1.)); +#15797 = ADVANCED_FACE('',(#15798),#15809,.F.); +#15798 = FACE_BOUND('',#15799,.F.); +#15799 = EDGE_LOOP('',(#15800,#15801,#15802,#15808)); +#15800 = ORIENTED_EDGE('',*,*,#14902,.T.); +#15801 = ORIENTED_EDGE('',*,*,#15777,.T.); +#15802 = ORIENTED_EDGE('',*,*,#15803,.T.); +#15803 = EDGE_CURVE('',#15778,#15723,#15804,.T.); +#15804 = LINE('',#15805,#15806); +#15805 = CARTESIAN_POINT('',(7.82,-0.32,6.3)); +#15806 = VECTOR('',#15807,1.); +#15807 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15808 = ORIENTED_EDGE('',*,*,#15722,.T.); +#15809 = PLANE('',#15810); +#15810 = AXIS2_PLACEMENT_3D('',#15811,#15812,#15813); +#15811 = CARTESIAN_POINT('',(7.82,3.65940088399E-02,1.522832428212)); +#15812 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15813 = DIRECTION('',(0.,0.,1.)); +#15814 = ADVANCED_FACE('',(#15815),#15872,.T.); +#15815 = FACE_BOUND('',#15816,.T.); +#15816 = EDGE_LOOP('',(#15817,#15827,#15835,#15843,#15849,#15850,#15858, + #15866)); +#15817 = ORIENTED_EDGE('',*,*,#15818,.T.); +#15818 = EDGE_CURVE('',#15819,#15821,#15823,.T.); +#15819 = VERTEX_POINT('',#15820); +#15820 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#15821 = VERTEX_POINT('',#15822); +#15822 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#15823 = LINE('',#15824,#15825); +#15824 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#15825 = VECTOR('',#15826,1.); +#15826 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15827 = ORIENTED_EDGE('',*,*,#15828,.T.); +#15828 = EDGE_CURVE('',#15821,#15829,#15831,.T.); +#15829 = VERTEX_POINT('',#15830); +#15830 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#15831 = LINE('',#15832,#15833); +#15832 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#15833 = VECTOR('',#15834,1.); +#15834 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#15835 = ORIENTED_EDGE('',*,*,#15836,.T.); +#15836 = EDGE_CURVE('',#15829,#15837,#15839,.T.); +#15837 = VERTEX_POINT('',#15838); +#15838 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#15839 = LINE('',#15840,#15841); +#15840 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#15841 = VECTOR('',#15842,1.); +#15842 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#15843 = ORIENTED_EDGE('',*,*,#15844,.T.); +#15844 = EDGE_CURVE('',#15837,#15259,#15845,.T.); +#15845 = LINE('',#15846,#15847); +#15846 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#15847 = VECTOR('',#15848,1.); +#15848 = DIRECTION('',(0.,0.,1.)); +#15849 = ORIENTED_EDGE('',*,*,#15256,.F.); +#15850 = ORIENTED_EDGE('',*,*,#15851,.T.); +#15851 = EDGE_CURVE('',#15257,#15852,#15854,.T.); +#15852 = VERTEX_POINT('',#15853); +#15853 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#15854 = LINE('',#15855,#15856); +#15855 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#15856 = VECTOR('',#15857,1.); +#15857 = DIRECTION('',(-0.,0.,-1.)); +#15858 = ORIENTED_EDGE('',*,*,#15859,.T.); +#15859 = EDGE_CURVE('',#15852,#15860,#15862,.T.); +#15860 = VERTEX_POINT('',#15861); +#15861 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#15862 = LINE('',#15863,#15864); +#15863 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#15864 = VECTOR('',#15865,1.); +#15865 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#15866 = ORIENTED_EDGE('',*,*,#15867,.T.); +#15867 = EDGE_CURVE('',#15860,#15819,#15868,.T.); +#15868 = LINE('',#15869,#15870); +#15869 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#15870 = VECTOR('',#15871,1.); +#15871 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#15872 = PLANE('',#15873); +#15873 = AXIS2_PLACEMENT_3D('',#15874,#15875,#15876); +#15874 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#15875 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15876 = DIRECTION('',(0.,0.,1.)); +#15877 = ADVANCED_FACE('',(#15878),#15896,.F.); +#15878 = FACE_BOUND('',#15879,.F.); +#15879 = EDGE_LOOP('',(#15880,#15888,#15894,#15895)); +#15880 = ORIENTED_EDGE('',*,*,#15881,.F.); +#15881 = EDGE_CURVE('',#15882,#15275,#15884,.T.); +#15882 = VERTEX_POINT('',#15883); +#15883 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#15884 = LINE('',#15885,#15886); +#15885 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#15886 = VECTOR('',#15887,1.); +#15887 = DIRECTION('',(0.,0.,1.)); +#15888 = ORIENTED_EDGE('',*,*,#15889,.T.); +#15889 = EDGE_CURVE('',#15882,#15837,#15890,.T.); +#15890 = LINE('',#15891,#15892); +#15891 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#15892 = VECTOR('',#15893,1.); +#15893 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15894 = ORIENTED_EDGE('',*,*,#15844,.T.); +#15895 = ORIENTED_EDGE('',*,*,#15282,.F.); +#15896 = PLANE('',#15897); +#15897 = AXIS2_PLACEMENT_3D('',#15898,#15899,#15900); +#15898 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#15899 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#15900 = DIRECTION('',(0.,-0.,1.)); +#15901 = ADVANCED_FACE('',(#15902),#15952,.F.); +#15902 = FACE_BOUND('',#15903,.F.); +#15903 = EDGE_LOOP('',(#15904,#15914,#15922,#15928,#15929,#15930,#15938, + #15946)); +#15904 = ORIENTED_EDGE('',*,*,#15905,.T.); +#15905 = EDGE_CURVE('',#15906,#15908,#15910,.T.); +#15906 = VERTEX_POINT('',#15907); +#15907 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#15908 = VERTEX_POINT('',#15909); +#15909 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#15910 = LINE('',#15911,#15912); +#15911 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#15912 = VECTOR('',#15913,1.); +#15913 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15914 = ORIENTED_EDGE('',*,*,#15915,.T.); +#15915 = EDGE_CURVE('',#15908,#15916,#15918,.T.); +#15916 = VERTEX_POINT('',#15917); +#15917 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#15918 = LINE('',#15919,#15920); +#15919 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#15920 = VECTOR('',#15921,1.); +#15921 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#15922 = ORIENTED_EDGE('',*,*,#15923,.T.); +#15923 = EDGE_CURVE('',#15916,#15882,#15924,.T.); +#15924 = LINE('',#15925,#15926); +#15925 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#15926 = VECTOR('',#15927,1.); +#15927 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#15928 = ORIENTED_EDGE('',*,*,#15881,.T.); +#15929 = ORIENTED_EDGE('',*,*,#15274,.F.); +#15930 = ORIENTED_EDGE('',*,*,#15931,.T.); +#15931 = EDGE_CURVE('',#15267,#15932,#15934,.T.); +#15932 = VERTEX_POINT('',#15933); +#15933 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#15934 = LINE('',#15935,#15936); +#15935 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#15936 = VECTOR('',#15937,1.); +#15937 = DIRECTION('',(-0.,0.,-1.)); +#15938 = ORIENTED_EDGE('',*,*,#15939,.T.); +#15939 = EDGE_CURVE('',#15932,#15940,#15942,.T.); +#15940 = VERTEX_POINT('',#15941); +#15941 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#15942 = LINE('',#15943,#15944); +#15943 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#15944 = VECTOR('',#15945,1.); +#15945 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#15946 = ORIENTED_EDGE('',*,*,#15947,.T.); +#15947 = EDGE_CURVE('',#15940,#15906,#15948,.T.); +#15948 = LINE('',#15949,#15950); +#15949 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#15950 = VECTOR('',#15951,1.); +#15951 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#15952 = PLANE('',#15953); +#15953 = AXIS2_PLACEMENT_3D('',#15954,#15955,#15956); +#15954 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#15955 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15956 = DIRECTION('',(0.,0.,1.)); +#15957 = ADVANCED_FACE('',(#15958),#15969,.F.); +#15958 = FACE_BOUND('',#15959,.F.); +#15959 = EDGE_LOOP('',(#15960,#15961,#15962,#15963)); +#15960 = ORIENTED_EDGE('',*,*,#15931,.F.); +#15961 = ORIENTED_EDGE('',*,*,#15266,.F.); +#15962 = ORIENTED_EDGE('',*,*,#15851,.T.); +#15963 = ORIENTED_EDGE('',*,*,#15964,.F.); +#15964 = EDGE_CURVE('',#15932,#15852,#15965,.T.); +#15965 = LINE('',#15966,#15967); +#15966 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#15967 = VECTOR('',#15968,1.); +#15968 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#15969 = PLANE('',#15970); +#15970 = AXIS2_PLACEMENT_3D('',#15971,#15972,#15973); +#15971 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#15972 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15973 = DIRECTION('',(-0.,0.,-1.)); +#15974 = ADVANCED_FACE('',(#15975),#16000,.F.); +#15975 = FACE_BOUND('',#15976,.F.); +#15976 = EDGE_LOOP('',(#15977,#15987,#15993,#15994)); +#15977 = ORIENTED_EDGE('',*,*,#15978,.T.); +#15978 = EDGE_CURVE('',#15979,#15981,#15983,.T.); +#15979 = VERTEX_POINT('',#15980); +#15980 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#15981 = VERTEX_POINT('',#15982); +#15982 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#15983 = LINE('',#15984,#15985); +#15984 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#15985 = VECTOR('',#15986,1.); +#15986 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#15987 = ORIENTED_EDGE('',*,*,#15988,.T.); +#15988 = EDGE_CURVE('',#15981,#15305,#15989,.T.); +#15989 = LINE('',#15990,#15991); +#15990 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#15991 = VECTOR('',#15992,1.); +#15992 = DIRECTION('',(0.,0.,1.)); +#15993 = ORIENTED_EDGE('',*,*,#15302,.F.); +#15994 = ORIENTED_EDGE('',*,*,#15995,.T.); +#15995 = EDGE_CURVE('',#15303,#15979,#15996,.T.); +#15996 = LINE('',#15997,#15998); +#15997 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#15998 = VECTOR('',#15999,1.); +#15999 = DIRECTION('',(-0.,0.,-1.)); +#16000 = PLANE('',#16001); +#16001 = AXIS2_PLACEMENT_3D('',#16002,#16003,#16004); +#16002 = CARTESIAN_POINT('',(2.82,1.138921523207E-16,1.55)); +#16003 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16004 = DIRECTION('',(0.,0.,1.)); +#16005 = ADVANCED_FACE('',(#16006),#16024,.F.); +#16006 = FACE_BOUND('',#16007,.F.); +#16007 = EDGE_LOOP('',(#16008,#16009,#16010,#16018)); +#16008 = ORIENTED_EDGE('',*,*,#15995,.F.); +#16009 = ORIENTED_EDGE('',*,*,#15328,.F.); +#16010 = ORIENTED_EDGE('',*,*,#16011,.T.); +#16011 = EDGE_CURVE('',#15321,#16012,#16014,.T.); +#16012 = VERTEX_POINT('',#16013); +#16013 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#16014 = LINE('',#16015,#16016); +#16015 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#16016 = VECTOR('',#16017,1.); +#16017 = DIRECTION('',(-0.,0.,-1.)); +#16018 = ORIENTED_EDGE('',*,*,#16019,.F.); +#16019 = EDGE_CURVE('',#15979,#16012,#16020,.T.); +#16020 = LINE('',#16021,#16022); +#16021 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#16022 = VECTOR('',#16023,1.); +#16023 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16024 = PLANE('',#16025); +#16025 = AXIS2_PLACEMENT_3D('',#16026,#16027,#16028); +#16026 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#16027 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16028 = DIRECTION('',(-0.,0.,-1.)); +#16029 = ADVANCED_FACE('',(#16030),#16048,.T.); +#16030 = FACE_BOUND('',#16031,.T.); +#16031 = EDGE_LOOP('',(#16032,#16040,#16046,#16047)); +#16032 = ORIENTED_EDGE('',*,*,#16033,.T.); +#16033 = EDGE_CURVE('',#16012,#16034,#16036,.T.); +#16034 = VERTEX_POINT('',#16035); +#16035 = CARTESIAN_POINT('',(2.18,-0.32,-3.2)); +#16036 = LINE('',#16037,#16038); +#16037 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#16038 = VECTOR('',#16039,1.); +#16039 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16040 = ORIENTED_EDGE('',*,*,#16041,.T.); +#16041 = EDGE_CURVE('',#16034,#15313,#16042,.T.); +#16042 = LINE('',#16043,#16044); +#16043 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#16044 = VECTOR('',#16045,1.); +#16045 = DIRECTION('',(0.,0.,1.)); +#16046 = ORIENTED_EDGE('',*,*,#15320,.F.); +#16047 = ORIENTED_EDGE('',*,*,#16011,.T.); +#16048 = PLANE('',#16049); +#16049 = AXIS2_PLACEMENT_3D('',#16050,#16051,#16052); +#16050 = CARTESIAN_POINT('',(2.18,1.922695474661E-16,1.55)); +#16051 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16052 = DIRECTION('',(0.,0.,1.)); +#16053 = ADVANCED_FACE('',(#16054),#16065,.F.); +#16054 = FACE_BOUND('',#16055,.F.); +#16055 = EDGE_LOOP('',(#16056,#16057,#16063,#16064)); +#16056 = ORIENTED_EDGE('',*,*,#15988,.F.); +#16057 = ORIENTED_EDGE('',*,*,#16058,.T.); +#16058 = EDGE_CURVE('',#15981,#16034,#16059,.T.); +#16059 = LINE('',#16060,#16061); +#16060 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#16061 = VECTOR('',#16062,1.); +#16062 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16063 = ORIENTED_EDGE('',*,*,#16041,.T.); +#16064 = ORIENTED_EDGE('',*,*,#15312,.F.); +#16065 = PLANE('',#16066); +#16066 = AXIS2_PLACEMENT_3D('',#16067,#16068,#16069); +#16067 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#16068 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16069 = DIRECTION('',(0.,-0.,1.)); +#16070 = ADVANCED_FACE('',(#16071),#16096,.T.); +#16071 = FACE_BOUND('',#16072,.T.); +#16072 = EDGE_LOOP('',(#16073,#16083,#16089,#16090)); +#16073 = ORIENTED_EDGE('',*,*,#16074,.T.); +#16074 = EDGE_CURVE('',#16075,#16077,#16079,.T.); +#16075 = VERTEX_POINT('',#16076); +#16076 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#16077 = VERTEX_POINT('',#16078); +#16078 = CARTESIAN_POINT('',(4.68,-0.32,-3.2)); +#16079 = LINE('',#16080,#16081); +#16080 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#16081 = VECTOR('',#16082,1.); +#16082 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16083 = ORIENTED_EDGE('',*,*,#16084,.T.); +#16084 = EDGE_CURVE('',#16077,#15351,#16085,.T.); +#16085 = LINE('',#16086,#16087); +#16086 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#16087 = VECTOR('',#16088,1.); +#16088 = DIRECTION('',(0.,0.,1.)); +#16089 = ORIENTED_EDGE('',*,*,#15348,.F.); +#16090 = ORIENTED_EDGE('',*,*,#16091,.T.); +#16091 = EDGE_CURVE('',#15349,#16075,#16092,.T.); +#16092 = LINE('',#16093,#16094); +#16093 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#16094 = VECTOR('',#16095,1.); +#16095 = DIRECTION('',(-0.,0.,-1.)); +#16096 = PLANE('',#16097); +#16097 = AXIS2_PLACEMENT_3D('',#16098,#16099,#16100); +#16098 = CARTESIAN_POINT('',(4.68,-1.138921523207E-16,1.55)); +#16099 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16100 = DIRECTION('',(0.,0.,1.)); +#16101 = ADVANCED_FACE('',(#16102),#16120,.F.); +#16102 = FACE_BOUND('',#16103,.F.); +#16103 = EDGE_LOOP('',(#16104,#16112,#16118,#16119)); +#16104 = ORIENTED_EDGE('',*,*,#16105,.F.); +#16105 = EDGE_CURVE('',#16106,#15367,#16108,.T.); +#16106 = VERTEX_POINT('',#16107); +#16107 = CARTESIAN_POINT('',(5.32,-0.32,-3.2)); +#16108 = LINE('',#16109,#16110); +#16109 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#16110 = VECTOR('',#16111,1.); +#16111 = DIRECTION('',(0.,0.,1.)); +#16112 = ORIENTED_EDGE('',*,*,#16113,.T.); +#16113 = EDGE_CURVE('',#16106,#16077,#16114,.T.); +#16114 = LINE('',#16115,#16116); +#16115 = CARTESIAN_POINT('',(5.32,-0.32,-3.2)); +#16116 = VECTOR('',#16117,1.); +#16117 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16118 = ORIENTED_EDGE('',*,*,#16084,.T.); +#16119 = ORIENTED_EDGE('',*,*,#15374,.F.); +#16120 = PLANE('',#16121); +#16121 = AXIS2_PLACEMENT_3D('',#16122,#16123,#16124); +#16122 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#16123 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16124 = DIRECTION('',(0.,-0.,1.)); +#16125 = ADVANCED_FACE('',(#16126),#16144,.F.); +#16126 = FACE_BOUND('',#16127,.F.); +#16127 = EDGE_LOOP('',(#16128,#16136,#16137,#16138)); +#16128 = ORIENTED_EDGE('',*,*,#16129,.T.); +#16129 = EDGE_CURVE('',#16130,#16106,#16132,.T.); +#16130 = VERTEX_POINT('',#16131); +#16131 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#16132 = LINE('',#16133,#16134); +#16133 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#16134 = VECTOR('',#16135,1.); +#16135 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16136 = ORIENTED_EDGE('',*,*,#16105,.T.); +#16137 = ORIENTED_EDGE('',*,*,#15366,.F.); +#16138 = ORIENTED_EDGE('',*,*,#16139,.T.); +#16139 = EDGE_CURVE('',#15359,#16130,#16140,.T.); +#16140 = LINE('',#16141,#16142); +#16141 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#16142 = VECTOR('',#16143,1.); +#16143 = DIRECTION('',(-0.,0.,-1.)); +#16144 = PLANE('',#16145); +#16145 = AXIS2_PLACEMENT_3D('',#16146,#16147,#16148); +#16146 = CARTESIAN_POINT('',(5.32,-1.922695474661E-16,1.55)); +#16147 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16148 = DIRECTION('',(0.,0.,1.)); +#16149 = ADVANCED_FACE('',(#16150),#16161,.F.); +#16150 = FACE_BOUND('',#16151,.F.); +#16151 = EDGE_LOOP('',(#16152,#16153,#16154,#16155)); +#16152 = ORIENTED_EDGE('',*,*,#16139,.F.); +#16153 = ORIENTED_EDGE('',*,*,#15358,.F.); +#16154 = ORIENTED_EDGE('',*,*,#16091,.T.); +#16155 = ORIENTED_EDGE('',*,*,#16156,.F.); +#16156 = EDGE_CURVE('',#16130,#16075,#16157,.T.); +#16157 = LINE('',#16158,#16159); +#16158 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#16159 = VECTOR('',#16160,1.); +#16160 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16161 = PLANE('',#16162); +#16162 = AXIS2_PLACEMENT_3D('',#16163,#16164,#16165); +#16163 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#16164 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16165 = DIRECTION('',(-0.,0.,-1.)); +#16166 = ADVANCED_FACE('',(#16167),#16192,.F.); +#16167 = FACE_BOUND('',#16168,.F.); +#16168 = EDGE_LOOP('',(#16169,#16177,#16178,#16186)); +#16169 = ORIENTED_EDGE('',*,*,#16170,.F.); +#16170 = EDGE_CURVE('',#15397,#16171,#16173,.T.); +#16171 = VERTEX_POINT('',#16172); +#16172 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#16173 = LINE('',#16174,#16175); +#16174 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#16175 = VECTOR('',#16176,1.); +#16176 = DIRECTION('',(-0.,0.,-1.)); +#16177 = ORIENTED_EDGE('',*,*,#15394,.F.); +#16178 = ORIENTED_EDGE('',*,*,#16179,.T.); +#16179 = EDGE_CURVE('',#15395,#16180,#16182,.T.); +#16180 = VERTEX_POINT('',#16181); +#16181 = CARTESIAN_POINT('',(7.18,0.32,-0.9)); +#16182 = LINE('',#16183,#16184); +#16183 = CARTESIAN_POINT('',(7.18,0.32,6.5)); +#16184 = VECTOR('',#16185,1.); +#16185 = DIRECTION('',(-0.,0.,-1.)); +#16186 = ORIENTED_EDGE('',*,*,#16187,.F.); +#16187 = EDGE_CURVE('',#16171,#16180,#16188,.T.); +#16188 = LINE('',#16189,#16190); +#16189 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#16190 = VECTOR('',#16191,1.); +#16191 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16192 = PLANE('',#16193); +#16193 = AXIS2_PLACEMENT_3D('',#16194,#16195,#16196); +#16194 = CARTESIAN_POINT('',(7.82,0.32,6.5)); +#16195 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16196 = DIRECTION('',(-0.,0.,-1.)); +#16197 = ADVANCED_FACE('',(#16198),#16248,.T.); +#16198 = FACE_BOUND('',#16199,.T.); +#16199 = EDGE_LOOP('',(#16200,#16210,#16218,#16226,#16232,#16233,#16234, + #16242)); +#16200 = ORIENTED_EDGE('',*,*,#16201,.T.); +#16201 = EDGE_CURVE('',#16202,#16204,#16206,.T.); +#16202 = VERTEX_POINT('',#16203); +#16203 = CARTESIAN_POINT('',(7.18,0.351578947368,-3.2)); +#16204 = VERTEX_POINT('',#16205); +#16205 = CARTESIAN_POINT('',(7.18,-0.288421052632,-3.2)); +#16206 = LINE('',#16207,#16208); +#16207 = CARTESIAN_POINT('',(7.18,0.32,-3.2)); +#16208 = VECTOR('',#16209,1.); +#16209 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16210 = ORIENTED_EDGE('',*,*,#16211,.T.); +#16211 = EDGE_CURVE('',#16204,#16212,#16214,.T.); +#16212 = VERTEX_POINT('',#16213); +#16213 = CARTESIAN_POINT('',(7.18,-2.E-02,-1.5)); +#16214 = LINE('',#16215,#16216); +#16215 = CARTESIAN_POINT('',(7.18,-0.32,-3.4)); +#16216 = VECTOR('',#16217,1.); +#16217 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#16218 = ORIENTED_EDGE('',*,*,#16219,.T.); +#16219 = EDGE_CURVE('',#16212,#16220,#16222,.T.); +#16220 = VERTEX_POINT('',#16221); +#16221 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#16222 = LINE('',#16223,#16224); +#16223 = CARTESIAN_POINT('',(7.18,-2.E-02,-1.5)); +#16224 = VECTOR('',#16225,1.); +#16225 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#16226 = ORIENTED_EDGE('',*,*,#16227,.T.); +#16227 = EDGE_CURVE('',#16220,#15413,#16228,.T.); +#16228 = LINE('',#16229,#16230); +#16229 = CARTESIAN_POINT('',(7.18,-0.32,-0.9)); +#16230 = VECTOR('',#16231,1.); +#16231 = DIRECTION('',(0.,0.,1.)); +#16232 = ORIENTED_EDGE('',*,*,#15420,.F.); +#16233 = ORIENTED_EDGE('',*,*,#16179,.T.); +#16234 = ORIENTED_EDGE('',*,*,#16235,.T.); +#16235 = EDGE_CURVE('',#16180,#16236,#16238,.T.); +#16236 = VERTEX_POINT('',#16237); +#16237 = CARTESIAN_POINT('',(7.18,0.62,-1.5)); +#16238 = LINE('',#16239,#16240); +#16239 = CARTESIAN_POINT('',(7.18,0.32,-0.9)); +#16240 = VECTOR('',#16241,1.); +#16241 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#16242 = ORIENTED_EDGE('',*,*,#16243,.T.); +#16243 = EDGE_CURVE('',#16236,#16202,#16244,.T.); +#16244 = LINE('',#16245,#16246); +#16245 = CARTESIAN_POINT('',(7.18,0.62,-1.5)); +#16246 = VECTOR('',#16247,1.); +#16247 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#16248 = PLANE('',#16249); +#16249 = AXIS2_PLACEMENT_3D('',#16250,#16251,#16252); +#16250 = CARTESIAN_POINT('',(7.18,3.65940088399E-02,1.522832428212)); +#16251 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16252 = DIRECTION('',(0.,0.,1.)); +#16253 = ADVANCED_FACE('',(#16254),#16272,.F.); +#16254 = FACE_BOUND('',#16255,.F.); +#16255 = EDGE_LOOP('',(#16256,#16264,#16270,#16271)); +#16256 = ORIENTED_EDGE('',*,*,#16257,.F.); +#16257 = EDGE_CURVE('',#16258,#15405,#16260,.T.); +#16258 = VERTEX_POINT('',#16259); +#16259 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#16260 = LINE('',#16261,#16262); +#16261 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#16262 = VECTOR('',#16263,1.); +#16263 = DIRECTION('',(0.,0.,1.)); +#16264 = ORIENTED_EDGE('',*,*,#16265,.T.); +#16265 = EDGE_CURVE('',#16258,#16220,#16266,.T.); +#16266 = LINE('',#16267,#16268); +#16267 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#16268 = VECTOR('',#16269,1.); +#16269 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16270 = ORIENTED_EDGE('',*,*,#16227,.T.); +#16271 = ORIENTED_EDGE('',*,*,#15412,.F.); +#16272 = PLANE('',#16273); +#16273 = AXIS2_PLACEMENT_3D('',#16274,#16275,#16276); +#16274 = CARTESIAN_POINT('',(7.82,-0.32,-0.9)); +#16275 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16276 = DIRECTION('',(0.,-0.,1.)); +#16277 = ADVANCED_FACE('',(#16278),#16321,.F.); +#16278 = FACE_BOUND('',#16279,.F.); +#16279 = EDGE_LOOP('',(#16280,#16290,#16298,#16304,#16305,#16306,#16307, + #16315)); +#16280 = ORIENTED_EDGE('',*,*,#16281,.T.); +#16281 = EDGE_CURVE('',#16282,#16284,#16286,.T.); +#16282 = VERTEX_POINT('',#16283); +#16283 = CARTESIAN_POINT('',(7.82,0.351578947368,-3.2)); +#16284 = VERTEX_POINT('',#16285); +#16285 = CARTESIAN_POINT('',(7.82,-0.288421052632,-3.2)); +#16286 = LINE('',#16287,#16288); +#16287 = CARTESIAN_POINT('',(7.82,0.32,-3.2)); +#16288 = VECTOR('',#16289,1.); +#16289 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16290 = ORIENTED_EDGE('',*,*,#16291,.T.); +#16291 = EDGE_CURVE('',#16284,#16292,#16294,.T.); +#16292 = VERTEX_POINT('',#16293); +#16293 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#16294 = LINE('',#16295,#16296); +#16295 = CARTESIAN_POINT('',(7.82,-0.32,-3.4)); +#16296 = VECTOR('',#16297,1.); +#16297 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#16298 = ORIENTED_EDGE('',*,*,#16299,.T.); +#16299 = EDGE_CURVE('',#16292,#16258,#16300,.T.); +#16300 = LINE('',#16301,#16302); +#16301 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#16302 = VECTOR('',#16303,1.); +#16303 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#16304 = ORIENTED_EDGE('',*,*,#16257,.T.); +#16305 = ORIENTED_EDGE('',*,*,#15404,.F.); +#16306 = ORIENTED_EDGE('',*,*,#16170,.T.); +#16307 = ORIENTED_EDGE('',*,*,#16308,.T.); +#16308 = EDGE_CURVE('',#16171,#16309,#16311,.T.); +#16309 = VERTEX_POINT('',#16310); +#16310 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#16311 = LINE('',#16312,#16313); +#16312 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#16313 = VECTOR('',#16314,1.); +#16314 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#16315 = ORIENTED_EDGE('',*,*,#16316,.T.); +#16316 = EDGE_CURVE('',#16309,#16282,#16317,.T.); +#16317 = LINE('',#16318,#16319); +#16318 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#16319 = VECTOR('',#16320,1.); +#16320 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#16321 = PLANE('',#16322); +#16322 = AXIS2_PLACEMENT_3D('',#16323,#16324,#16325); +#16323 = CARTESIAN_POINT('',(7.82,3.65940088399E-02,1.522832428212)); +#16324 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16325 = DIRECTION('',(0.,0.,1.)); +#16326 = ADVANCED_FACE('',(#16327),#16352,.F.); +#16327 = FACE_BOUND('',#16328,.T.); +#16328 = EDGE_LOOP('',(#16329,#16337,#16345,#16351)); +#16329 = ORIENTED_EDGE('',*,*,#16330,.F.); +#16330 = EDGE_CURVE('',#16331,#15436,#16333,.T.); +#16331 = VERTEX_POINT('',#16332); +#16332 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#16333 = LINE('',#16334,#16335); +#16334 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#16335 = VECTOR('',#16336,1.); +#16336 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#16337 = ORIENTED_EDGE('',*,*,#16338,.T.); +#16338 = EDGE_CURVE('',#16331,#16339,#16341,.T.); +#16339 = VERTEX_POINT('',#16340); +#16340 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#16341 = LINE('',#16342,#16343); +#16342 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#16343 = VECTOR('',#16344,1.); +#16344 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16345 = ORIENTED_EDGE('',*,*,#16346,.T.); +#16346 = EDGE_CURVE('',#16339,#15444,#16347,.T.); +#16347 = LINE('',#16348,#16349); +#16348 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#16349 = VECTOR('',#16350,1.); +#16350 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#16351 = ORIENTED_EDGE('',*,*,#15443,.F.); +#16352 = PLANE('',#16353); +#16353 = AXIS2_PLACEMENT_3D('',#16354,#16355,#16356); +#16354 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#16355 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#16356 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#16357 = ADVANCED_FACE('',(#16358),#16376,.T.); +#16358 = FACE_BOUND('',#16359,.F.); +#16359 = EDGE_LOOP('',(#16360,#16368,#16369,#16370)); +#16360 = ORIENTED_EDGE('',*,*,#16361,.F.); +#16361 = EDGE_CURVE('',#15466,#16362,#16364,.T.); +#16362 = VERTEX_POINT('',#16363); +#16363 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#16364 = LINE('',#16365,#16366); +#16365 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#16366 = VECTOR('',#16367,1.); +#16367 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#16368 = ORIENTED_EDGE('',*,*,#15475,.T.); +#16369 = ORIENTED_EDGE('',*,*,#16330,.F.); +#16370 = ORIENTED_EDGE('',*,*,#16371,.F.); +#16371 = EDGE_CURVE('',#16362,#16331,#16372,.T.); +#16372 = LINE('',#16373,#16374); +#16373 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#16374 = VECTOR('',#16375,1.); +#16375 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16376 = PLANE('',#16377); +#16377 = AXIS2_PLACEMENT_3D('',#16378,#16379,#16380); +#16378 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#16379 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#16380 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#16381 = ADVANCED_FACE('',(#16382),#16400,.T.); +#16382 = FACE_BOUND('',#16383,.F.); +#16383 = EDGE_LOOP('',(#16384,#16385,#16393,#16399)); +#16384 = ORIENTED_EDGE('',*,*,#16361,.T.); +#16385 = ORIENTED_EDGE('',*,*,#16386,.T.); +#16386 = EDGE_CURVE('',#16362,#16387,#16389,.T.); +#16387 = VERTEX_POINT('',#16388); +#16388 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#16389 = LINE('',#16390,#16391); +#16390 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#16391 = VECTOR('',#16392,1.); +#16392 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16393 = ORIENTED_EDGE('',*,*,#16394,.T.); +#16394 = EDGE_CURVE('',#16387,#15492,#16395,.T.); +#16395 = LINE('',#16396,#16397); +#16396 = CARTESIAN_POINT('',(0.146666666667,0.146666666667, + 6.473333333333)); +#16397 = VECTOR('',#16398,1.); +#16398 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#16399 = ORIENTED_EDGE('',*,*,#15491,.F.); +#16400 = PLANE('',#16401); +#16401 = AXIS2_PLACEMENT_3D('',#16402,#16403,#16404); +#16402 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#16403 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#16404 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#16405 = ADVANCED_FACE('',(#16406),#16417,.T.); +#16406 = FACE_BOUND('',#16407,.F.); +#16407 = EDGE_LOOP('',(#16408,#16409,#16415,#16416)); +#16408 = ORIENTED_EDGE('',*,*,#16394,.F.); +#16409 = ORIENTED_EDGE('',*,*,#16410,.T.); +#16410 = EDGE_CURVE('',#16387,#16339,#16411,.T.); +#16411 = LINE('',#16412,#16413); +#16412 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#16413 = VECTOR('',#16414,1.); +#16414 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16415 = ORIENTED_EDGE('',*,*,#16346,.T.); +#16416 = ORIENTED_EDGE('',*,*,#15514,.F.); +#16417 = PLANE('',#16418); +#16418 = AXIS2_PLACEMENT_3D('',#16419,#16420,#16421); +#16419 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#16420 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#16421 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#16422 = ADVANCED_FACE('',(#16423),#16448,.T.); +#16423 = FACE_BOUND('',#16424,.F.); +#16424 = EDGE_LOOP('',(#16425,#16433,#16441,#16447)); +#16425 = ORIENTED_EDGE('',*,*,#16426,.T.); +#16426 = EDGE_CURVE('',#15532,#16427,#16429,.T.); +#16427 = VERTEX_POINT('',#16428); +#16428 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#16429 = LINE('',#16430,#16431); +#16430 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#16431 = VECTOR('',#16432,1.); +#16432 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#16433 = ORIENTED_EDGE('',*,*,#16434,.T.); +#16434 = EDGE_CURVE('',#16427,#16435,#16437,.T.); +#16435 = VERTEX_POINT('',#16436); +#16436 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#16437 = LINE('',#16438,#16439); +#16438 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#16439 = VECTOR('',#16440,1.); +#16440 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16441 = ORIENTED_EDGE('',*,*,#16442,.T.); +#16442 = EDGE_CURVE('',#16435,#15540,#16443,.T.); +#16443 = LINE('',#16444,#16445); +#16444 = CARTESIAN_POINT('',(2.646666666667,0.146666666667, + 6.473333333333)); +#16445 = VECTOR('',#16446,1.); +#16446 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#16447 = ORIENTED_EDGE('',*,*,#15539,.F.); +#16448 = PLANE('',#16449); +#16449 = AXIS2_PLACEMENT_3D('',#16450,#16451,#16452); +#16450 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#16451 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#16452 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#16453 = ADVANCED_FACE('',(#16454),#16472,.T.); +#16454 = FACE_BOUND('',#16455,.F.); +#16455 = EDGE_LOOP('',(#16456,#16457,#16465,#16471)); +#16456 = ORIENTED_EDGE('',*,*,#16442,.F.); +#16457 = ORIENTED_EDGE('',*,*,#16458,.T.); +#16458 = EDGE_CURVE('',#16435,#16459,#16461,.T.); +#16459 = VERTEX_POINT('',#16460); +#16460 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#16461 = LINE('',#16462,#16463); +#16462 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#16463 = VECTOR('',#16464,1.); +#16464 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16465 = ORIENTED_EDGE('',*,*,#16466,.T.); +#16466 = EDGE_CURVE('',#16459,#15563,#16467,.T.); +#16467 = LINE('',#16468,#16469); +#16468 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#16469 = VECTOR('',#16470,1.); +#16470 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#16471 = ORIENTED_EDGE('',*,*,#15562,.F.); +#16472 = PLANE('',#16473); +#16473 = AXIS2_PLACEMENT_3D('',#16474,#16475,#16476); +#16474 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#16475 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#16476 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#16477 = ADVANCED_FACE('',(#16478),#16496,.F.); +#16478 = FACE_BOUND('',#16479,.T.); +#16479 = EDGE_LOOP('',(#16480,#16488,#16494,#16495)); +#16480 = ORIENTED_EDGE('',*,*,#16481,.F.); +#16481 = EDGE_CURVE('',#16482,#15587,#16484,.T.); +#16482 = VERTEX_POINT('',#16483); +#16483 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#16484 = LINE('',#16485,#16486); +#16485 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#16486 = VECTOR('',#16487,1.); +#16487 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#16488 = ORIENTED_EDGE('',*,*,#16489,.T.); +#16489 = EDGE_CURVE('',#16482,#16459,#16490,.T.); +#16490 = LINE('',#16491,#16492); +#16491 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#16492 = VECTOR('',#16493,1.); +#16493 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16494 = ORIENTED_EDGE('',*,*,#16466,.T.); +#16495 = ORIENTED_EDGE('',*,*,#15594,.F.); +#16496 = PLANE('',#16497); +#16497 = AXIS2_PLACEMENT_3D('',#16498,#16499,#16500); +#16498 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#16499 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#16500 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#16501 = ADVANCED_FACE('',(#16502),#16513,.T.); +#16502 = FACE_BOUND('',#16503,.F.); +#16503 = EDGE_LOOP('',(#16504,#16505,#16506,#16507)); +#16504 = ORIENTED_EDGE('',*,*,#16426,.F.); +#16505 = ORIENTED_EDGE('',*,*,#15612,.T.); +#16506 = ORIENTED_EDGE('',*,*,#16481,.F.); +#16507 = ORIENTED_EDGE('',*,*,#16508,.F.); +#16508 = EDGE_CURVE('',#16427,#16482,#16509,.T.); +#16509 = LINE('',#16510,#16511); +#16510 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#16511 = VECTOR('',#16512,1.); +#16512 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16513 = PLANE('',#16514); +#16514 = AXIS2_PLACEMENT_3D('',#16515,#16516,#16517); +#16515 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#16516 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#16517 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#16518 = ADVANCED_FACE('',(#16519),#16544,.F.); +#16519 = FACE_BOUND('',#16520,.T.); +#16520 = EDGE_LOOP('',(#16521,#16529,#16537,#16543)); +#16521 = ORIENTED_EDGE('',*,*,#16522,.F.); +#16522 = EDGE_CURVE('',#16523,#15628,#16525,.T.); +#16523 = VERTEX_POINT('',#16524); +#16524 = CARTESIAN_POINT('',(4.88,-0.12,6.5)); +#16525 = LINE('',#16526,#16527); +#16526 = CARTESIAN_POINT('',(4.853333333333,-0.146666666667, + 6.473333333333)); +#16527 = VECTOR('',#16528,1.); +#16528 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#16529 = ORIENTED_EDGE('',*,*,#16530,.T.); +#16530 = EDGE_CURVE('',#16523,#16531,#16533,.T.); +#16531 = VERTEX_POINT('',#16532); +#16532 = CARTESIAN_POINT('',(4.88,0.12,6.5)); +#16533 = LINE('',#16534,#16535); +#16534 = CARTESIAN_POINT('',(4.88,-0.32,6.5)); +#16535 = VECTOR('',#16536,1.); +#16536 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16537 = ORIENTED_EDGE('',*,*,#16538,.T.); +#16538 = EDGE_CURVE('',#16531,#15636,#16539,.T.); +#16539 = LINE('',#16540,#16541); +#16540 = CARTESIAN_POINT('',(4.96,4.E-02,6.58)); +#16541 = VECTOR('',#16542,1.); +#16542 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#16543 = ORIENTED_EDGE('',*,*,#15635,.F.); +#16544 = PLANE('',#16545); +#16545 = AXIS2_PLACEMENT_3D('',#16546,#16547,#16548); +#16546 = CARTESIAN_POINT('',(4.78,-0.32,6.4)); +#16547 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#16548 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#16549 = ADVANCED_FACE('',(#16550),#16568,.T.); +#16550 = FACE_BOUND('',#16551,.F.); +#16551 = EDGE_LOOP('',(#16552,#16560,#16561,#16562)); +#16552 = ORIENTED_EDGE('',*,*,#16553,.F.); +#16553 = EDGE_CURVE('',#15658,#16554,#16556,.T.); +#16554 = VERTEX_POINT('',#16555); +#16555 = CARTESIAN_POINT('',(5.12,-0.12,6.5)); +#16556 = LINE('',#16557,#16558); +#16557 = CARTESIAN_POINT('',(5.253333333333,-0.253333333333, + 6.366666666667)); +#16558 = VECTOR('',#16559,1.); +#16559 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#16560 = ORIENTED_EDGE('',*,*,#15667,.T.); +#16561 = ORIENTED_EDGE('',*,*,#16522,.F.); +#16562 = ORIENTED_EDGE('',*,*,#16563,.F.); +#16563 = EDGE_CURVE('',#16554,#16523,#16564,.T.); +#16564 = LINE('',#16565,#16566); +#16565 = CARTESIAN_POINT('',(5.32,-0.12,6.5)); +#16566 = VECTOR('',#16567,1.); +#16567 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16568 = PLANE('',#16569); +#16569 = AXIS2_PLACEMENT_3D('',#16570,#16571,#16572); +#16570 = CARTESIAN_POINT('',(5.32,-0.22,6.4)); +#16571 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#16572 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#16573 = ADVANCED_FACE('',(#16574),#16592,.T.); +#16574 = FACE_BOUND('',#16575,.F.); +#16575 = EDGE_LOOP('',(#16576,#16577,#16585,#16591)); +#16576 = ORIENTED_EDGE('',*,*,#16553,.T.); +#16577 = ORIENTED_EDGE('',*,*,#16578,.T.); +#16578 = EDGE_CURVE('',#16554,#16579,#16581,.T.); +#16579 = VERTEX_POINT('',#16580); +#16580 = CARTESIAN_POINT('',(5.12,0.12,6.5)); +#16581 = LINE('',#16582,#16583); +#16582 = CARTESIAN_POINT('',(5.12,-0.32,6.5)); +#16583 = VECTOR('',#16584,1.); +#16584 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16585 = ORIENTED_EDGE('',*,*,#16586,.T.); +#16586 = EDGE_CURVE('',#16579,#15684,#16587,.T.); +#16587 = LINE('',#16588,#16589); +#16588 = CARTESIAN_POINT('',(5.146666666667,0.146666666667, + 6.473333333333)); +#16589 = VECTOR('',#16590,1.); +#16590 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#16591 = ORIENTED_EDGE('',*,*,#15683,.F.); +#16592 = PLANE('',#16593); +#16593 = AXIS2_PLACEMENT_3D('',#16594,#16595,#16596); +#16594 = CARTESIAN_POINT('',(5.22,-0.32,6.4)); +#16595 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#16596 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#16597 = ADVANCED_FACE('',(#16598),#16609,.T.); +#16598 = FACE_BOUND('',#16599,.F.); +#16599 = EDGE_LOOP('',(#16600,#16601,#16607,#16608)); +#16600 = ORIENTED_EDGE('',*,*,#16586,.F.); +#16601 = ORIENTED_EDGE('',*,*,#16602,.T.); +#16602 = EDGE_CURVE('',#16579,#16531,#16603,.T.); +#16603 = LINE('',#16604,#16605); +#16604 = CARTESIAN_POINT('',(5.32,0.12,6.5)); +#16605 = VECTOR('',#16606,1.); +#16606 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16607 = ORIENTED_EDGE('',*,*,#16538,.T.); +#16608 = ORIENTED_EDGE('',*,*,#15706,.F.); +#16609 = PLANE('',#16610); +#16610 = AXIS2_PLACEMENT_3D('',#16611,#16612,#16613); +#16611 = CARTESIAN_POINT('',(5.32,0.22,6.4)); +#16612 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#16613 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#16614 = ADVANCED_FACE('',(#16615),#16640,.T.); +#16615 = FACE_BOUND('',#16616,.F.); +#16616 = EDGE_LOOP('',(#16617,#16625,#16633,#16639)); +#16617 = ORIENTED_EDGE('',*,*,#16618,.F.); +#16618 = EDGE_CURVE('',#16619,#15723,#16621,.T.); +#16619 = VERTEX_POINT('',#16620); +#16620 = CARTESIAN_POINT('',(7.62,0.12,6.5)); +#16621 = LINE('',#16622,#16623); +#16622 = CARTESIAN_POINT('',(7.646666666667,0.146666666667, + 6.473333333333)); +#16623 = VECTOR('',#16624,1.); +#16624 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#16625 = ORIENTED_EDGE('',*,*,#16626,.T.); +#16626 = EDGE_CURVE('',#16619,#16627,#16629,.T.); +#16627 = VERTEX_POINT('',#16628); +#16628 = CARTESIAN_POINT('',(7.38,0.12,6.5)); +#16629 = LINE('',#16630,#16631); +#16630 = CARTESIAN_POINT('',(7.82,0.12,6.5)); +#16631 = VECTOR('',#16632,1.); +#16632 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16633 = ORIENTED_EDGE('',*,*,#16634,.T.); +#16634 = EDGE_CURVE('',#16627,#15731,#16635,.T.); +#16635 = LINE('',#16636,#16637); +#16636 = CARTESIAN_POINT('',(7.46,4.E-02,6.58)); +#16637 = VECTOR('',#16638,1.); +#16638 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#16639 = ORIENTED_EDGE('',*,*,#15730,.F.); +#16640 = PLANE('',#16641); +#16641 = AXIS2_PLACEMENT_3D('',#16642,#16643,#16644); +#16642 = CARTESIAN_POINT('',(7.82,0.22,6.4)); +#16643 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#16644 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#16645 = ADVANCED_FACE('',(#16646),#16664,.F.); +#16646 = FACE_BOUND('',#16647,.T.); +#16647 = EDGE_LOOP('',(#16648,#16656,#16662,#16663)); +#16648 = ORIENTED_EDGE('',*,*,#16649,.F.); +#16649 = EDGE_CURVE('',#16650,#15755,#16652,.T.); +#16650 = VERTEX_POINT('',#16651); +#16651 = CARTESIAN_POINT('',(7.38,-0.12,6.5)); +#16652 = LINE('',#16653,#16654); +#16653 = CARTESIAN_POINT('',(7.353333333333,-0.146666666667, + 6.473333333333)); +#16654 = VECTOR('',#16655,1.); +#16655 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#16656 = ORIENTED_EDGE('',*,*,#16657,.T.); +#16657 = EDGE_CURVE('',#16650,#16627,#16658,.T.); +#16658 = LINE('',#16659,#16660); +#16659 = CARTESIAN_POINT('',(7.38,-0.32,6.5)); +#16660 = VECTOR('',#16661,1.); +#16661 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16662 = ORIENTED_EDGE('',*,*,#16634,.T.); +#16663 = ORIENTED_EDGE('',*,*,#15762,.F.); +#16664 = PLANE('',#16665); +#16665 = AXIS2_PLACEMENT_3D('',#16666,#16667,#16668); +#16666 = CARTESIAN_POINT('',(7.28,-0.32,6.4)); +#16667 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#16668 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#16669 = ADVANCED_FACE('',(#16670),#16688,.T.); +#16670 = FACE_BOUND('',#16671,.F.); +#16671 = EDGE_LOOP('',(#16672,#16680,#16681,#16682)); +#16672 = ORIENTED_EDGE('',*,*,#16673,.F.); +#16673 = EDGE_CURVE('',#15778,#16674,#16676,.T.); +#16674 = VERTEX_POINT('',#16675); +#16675 = CARTESIAN_POINT('',(7.62,-0.12,6.5)); +#16676 = LINE('',#16677,#16678); +#16677 = CARTESIAN_POINT('',(7.753333333333,-0.253333333333, + 6.366666666667)); +#16678 = VECTOR('',#16679,1.); +#16679 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#16680 = ORIENTED_EDGE('',*,*,#15787,.T.); +#16681 = ORIENTED_EDGE('',*,*,#16649,.F.); +#16682 = ORIENTED_EDGE('',*,*,#16683,.F.); +#16683 = EDGE_CURVE('',#16674,#16650,#16684,.T.); +#16684 = LINE('',#16685,#16686); +#16685 = CARTESIAN_POINT('',(7.82,-0.12,6.5)); +#16686 = VECTOR('',#16687,1.); +#16687 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16688 = PLANE('',#16689); +#16689 = AXIS2_PLACEMENT_3D('',#16690,#16691,#16692); +#16690 = CARTESIAN_POINT('',(7.82,-0.22,6.4)); +#16691 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#16692 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#16693 = ADVANCED_FACE('',(#16694),#16705,.T.); +#16694 = FACE_BOUND('',#16695,.F.); +#16695 = EDGE_LOOP('',(#16696,#16697,#16703,#16704)); +#16696 = ORIENTED_EDGE('',*,*,#16673,.T.); +#16697 = ORIENTED_EDGE('',*,*,#16698,.T.); +#16698 = EDGE_CURVE('',#16674,#16619,#16699,.T.); +#16699 = LINE('',#16700,#16701); +#16700 = CARTESIAN_POINT('',(7.62,-0.32,6.5)); +#16701 = VECTOR('',#16702,1.); +#16702 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#16703 = ORIENTED_EDGE('',*,*,#16618,.T.); +#16704 = ORIENTED_EDGE('',*,*,#15803,.F.); +#16705 = PLANE('',#16706); +#16706 = AXIS2_PLACEMENT_3D('',#16707,#16708,#16709); +#16707 = CARTESIAN_POINT('',(7.72,-0.32,6.4)); +#16708 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#16709 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#16710 = ADVANCED_FACE('',(#16711),#16752,.F.); +#16711 = FACE_BOUND('',#16712,.T.); +#16712 = EDGE_LOOP('',(#16713,#16723,#16731,#16739,#16745,#16746)); +#16713 = ORIENTED_EDGE('',*,*,#16714,.F.); +#16714 = EDGE_CURVE('',#16715,#16717,#16719,.T.); +#16715 = VERTEX_POINT('',#16716); +#16716 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#16717 = VERTEX_POINT('',#16718); +#16718 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#16719 = LINE('',#16720,#16721); +#16720 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#16721 = VECTOR('',#16722,1.); +#16722 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#16723 = ORIENTED_EDGE('',*,*,#16724,.T.); +#16724 = EDGE_CURVE('',#16715,#16725,#16727,.T.); +#16725 = VERTEX_POINT('',#16726); +#16726 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#16727 = LINE('',#16728,#16729); +#16728 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#16729 = VECTOR('',#16730,1.); +#16730 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16731 = ORIENTED_EDGE('',*,*,#16732,.T.); +#16732 = EDGE_CURVE('',#16725,#16733,#16735,.T.); +#16733 = VERTEX_POINT('',#16734); +#16734 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#16735 = LINE('',#16736,#16737); +#16736 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#16737 = VECTOR('',#16738,1.); +#16738 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#16739 = ORIENTED_EDGE('',*,*,#16740,.T.); +#16740 = EDGE_CURVE('',#16733,#15821,#16741,.T.); +#16741 = LINE('',#16742,#16743); +#16742 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#16743 = VECTOR('',#16744,1.); +#16744 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#16745 = ORIENTED_EDGE('',*,*,#15818,.F.); +#16746 = ORIENTED_EDGE('',*,*,#16747,.F.); +#16747 = EDGE_CURVE('',#16717,#15819,#16748,.T.); +#16748 = LINE('',#16749,#16750); +#16749 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#16750 = VECTOR('',#16751,1.); +#16751 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#16752 = PLANE('',#16753); +#16753 = AXIS2_PLACEMENT_3D('',#16754,#16755,#16756); +#16754 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#16755 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#16756 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#16757 = ADVANCED_FACE('',(#16758),#16783,.F.); +#16758 = FACE_BOUND('',#16759,.F.); +#16759 = EDGE_LOOP('',(#16760,#16761,#16767,#16768,#16769,#16777)); +#16760 = ORIENTED_EDGE('',*,*,#15947,.F.); +#16761 = ORIENTED_EDGE('',*,*,#16762,.T.); +#16762 = EDGE_CURVE('',#15940,#15860,#16763,.T.); +#16763 = LINE('',#16764,#16765); +#16764 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#16765 = VECTOR('',#16766,1.); +#16766 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16767 = ORIENTED_EDGE('',*,*,#15867,.T.); +#16768 = ORIENTED_EDGE('',*,*,#16747,.F.); +#16769 = ORIENTED_EDGE('',*,*,#16770,.F.); +#16770 = EDGE_CURVE('',#16771,#16717,#16773,.T.); +#16771 = VERTEX_POINT('',#16772); +#16772 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#16773 = LINE('',#16774,#16775); +#16774 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#16775 = VECTOR('',#16776,1.); +#16776 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16777 = ORIENTED_EDGE('',*,*,#16778,.T.); +#16778 = EDGE_CURVE('',#16771,#15906,#16779,.T.); +#16779 = LINE('',#16780,#16781); +#16780 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#16781 = VECTOR('',#16782,1.); +#16782 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#16783 = PLANE('',#16784); +#16784 = AXIS2_PLACEMENT_3D('',#16785,#16786,#16787); +#16785 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#16786 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#16787 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#16788 = ADVANCED_FACE('',(#16789),#16795,.F.); +#16789 = FACE_BOUND('',#16790,.F.); +#16790 = EDGE_LOOP('',(#16791,#16792,#16793,#16794)); +#16791 = ORIENTED_EDGE('',*,*,#15964,.T.); +#16792 = ORIENTED_EDGE('',*,*,#15859,.T.); +#16793 = ORIENTED_EDGE('',*,*,#16762,.F.); +#16794 = ORIENTED_EDGE('',*,*,#15939,.F.); +#16795 = PLANE('',#16796); +#16796 = AXIS2_PLACEMENT_3D('',#16797,#16798,#16799); +#16797 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#16798 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#16799 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#16800 = ADVANCED_FACE('',(#16801),#16812,.F.); +#16801 = FACE_BOUND('',#16802,.F.); +#16802 = EDGE_LOOP('',(#16803,#16809,#16810,#16811)); +#16803 = ORIENTED_EDGE('',*,*,#16804,.T.); +#16804 = EDGE_CURVE('',#15916,#15829,#16805,.T.); +#16805 = LINE('',#16806,#16807); +#16806 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#16807 = VECTOR('',#16808,1.); +#16808 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16809 = ORIENTED_EDGE('',*,*,#15836,.T.); +#16810 = ORIENTED_EDGE('',*,*,#15889,.F.); +#16811 = ORIENTED_EDGE('',*,*,#15923,.F.); +#16812 = PLANE('',#16813); +#16813 = AXIS2_PLACEMENT_3D('',#16814,#16815,#16816); +#16814 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#16815 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#16816 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#16817 = ADVANCED_FACE('',(#16818),#16838,.F.); +#16818 = FACE_BOUND('',#16819,.F.); +#16819 = EDGE_LOOP('',(#16820,#16821,#16829,#16835,#16836,#16837)); +#16820 = ORIENTED_EDGE('',*,*,#15915,.F.); +#16821 = ORIENTED_EDGE('',*,*,#16822,.F.); +#16822 = EDGE_CURVE('',#16823,#15908,#16825,.T.); +#16823 = VERTEX_POINT('',#16824); +#16824 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#16825 = LINE('',#16826,#16827); +#16826 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#16827 = VECTOR('',#16828,1.); +#16828 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#16829 = ORIENTED_EDGE('',*,*,#16830,.T.); +#16830 = EDGE_CURVE('',#16823,#16733,#16831,.T.); +#16831 = LINE('',#16832,#16833); +#16832 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#16833 = VECTOR('',#16834,1.); +#16834 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16835 = ORIENTED_EDGE('',*,*,#16740,.T.); +#16836 = ORIENTED_EDGE('',*,*,#15828,.T.); +#16837 = ORIENTED_EDGE('',*,*,#16804,.F.); +#16838 = PLANE('',#16839); +#16839 = AXIS2_PLACEMENT_3D('',#16840,#16841,#16842); +#16840 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#16841 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#16842 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#16843 = ADVANCED_FACE('',(#16844),#16871,.T.); +#16844 = FACE_BOUND('',#16845,.F.); +#16845 = EDGE_LOOP('',(#16846,#16854,#16862,#16868,#16869,#16870)); +#16846 = ORIENTED_EDGE('',*,*,#16847,.F.); +#16847 = EDGE_CURVE('',#16848,#16771,#16850,.T.); +#16848 = VERTEX_POINT('',#16849); +#16849 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#16850 = LINE('',#16851,#16852); +#16851 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225 + )); +#16852 = VECTOR('',#16853,1.); +#16853 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#16854 = ORIENTED_EDGE('',*,*,#16855,.T.); +#16855 = EDGE_CURVE('',#16848,#16856,#16858,.T.); +#16856 = VERTEX_POINT('',#16857); +#16857 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#16858 = LINE('',#16859,#16860); +#16859 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#16860 = VECTOR('',#16861,1.); +#16861 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16862 = ORIENTED_EDGE('',*,*,#16863,.T.); +#16863 = EDGE_CURVE('',#16856,#16823,#16864,.T.); +#16864 = LINE('',#16865,#16866); +#16865 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#16866 = VECTOR('',#16867,1.); +#16867 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#16868 = ORIENTED_EDGE('',*,*,#16822,.T.); +#16869 = ORIENTED_EDGE('',*,*,#15905,.F.); +#16870 = ORIENTED_EDGE('',*,*,#16778,.F.); +#16871 = PLANE('',#16872); +#16872 = AXIS2_PLACEMENT_3D('',#16873,#16874,#16875); +#16873 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#16874 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#16875 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#16876 = ADVANCED_FACE('',(#16877),#16902,.T.); +#16877 = FACE_BOUND('',#16878,.F.); +#16878 = EDGE_LOOP('',(#16879,#16887,#16895,#16901)); +#16879 = ORIENTED_EDGE('',*,*,#16880,.F.); +#16880 = EDGE_CURVE('',#16881,#15979,#16883,.T.); +#16881 = VERTEX_POINT('',#16882); +#16882 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#16883 = LINE('',#16884,#16885); +#16884 = CARTESIAN_POINT('',(2.753333333333,0.253333333333, + -3.266666666667)); +#16885 = VECTOR('',#16886,1.); +#16886 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#16887 = ORIENTED_EDGE('',*,*,#16888,.T.); +#16888 = EDGE_CURVE('',#16881,#16889,#16891,.T.); +#16889 = VERTEX_POINT('',#16890); +#16890 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#16891 = LINE('',#16892,#16893); +#16892 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#16893 = VECTOR('',#16894,1.); +#16894 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16895 = ORIENTED_EDGE('',*,*,#16896,.T.); +#16896 = EDGE_CURVE('',#16889,#15981,#16897,.T.); +#16897 = LINE('',#16898,#16899); +#16898 = CARTESIAN_POINT('',(2.646666666667,-0.146666666667, + -3.373333333333)); +#16899 = VECTOR('',#16900,1.); +#16900 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#16901 = ORIENTED_EDGE('',*,*,#15978,.F.); +#16902 = PLANE('',#16903); +#16903 = AXIS2_PLACEMENT_3D('',#16904,#16905,#16906); +#16904 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#16905 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#16906 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#16907 = ADVANCED_FACE('',(#16908),#16926,.T.); +#16908 = FACE_BOUND('',#16909,.T.); +#16909 = EDGE_LOOP('',(#16910,#16911,#16919,#16925)); +#16910 = ORIENTED_EDGE('',*,*,#16880,.F.); +#16911 = ORIENTED_EDGE('',*,*,#16912,.T.); +#16912 = EDGE_CURVE('',#16881,#16913,#16915,.T.); +#16913 = VERTEX_POINT('',#16914); +#16914 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#16915 = LINE('',#16916,#16917); +#16916 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#16917 = VECTOR('',#16918,1.); +#16918 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16919 = ORIENTED_EDGE('',*,*,#16920,.T.); +#16920 = EDGE_CURVE('',#16913,#16012,#16921,.T.); +#16921 = LINE('',#16922,#16923); +#16922 = CARTESIAN_POINT('',(2.353333333333,0.146666666667, + -3.373333333333)); +#16923 = VECTOR('',#16924,1.); +#16924 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#16925 = ORIENTED_EDGE('',*,*,#16019,.F.); +#16926 = PLANE('',#16927); +#16927 = AXIS2_PLACEMENT_3D('',#16928,#16929,#16930); +#16928 = CARTESIAN_POINT('',(2.82,0.22,-3.3)); +#16929 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187 + )); +#16930 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#16931 = ADVANCED_FACE('',(#16932),#16950,.F.); +#16932 = FACE_BOUND('',#16933,.T.); +#16933 = EDGE_LOOP('',(#16934,#16935,#16943,#16949)); +#16934 = ORIENTED_EDGE('',*,*,#16920,.F.); +#16935 = ORIENTED_EDGE('',*,*,#16936,.T.); +#16936 = EDGE_CURVE('',#16913,#16937,#16939,.T.); +#16937 = VERTEX_POINT('',#16938); +#16938 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#16939 = LINE('',#16940,#16941); +#16940 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#16941 = VECTOR('',#16942,1.); +#16942 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16943 = ORIENTED_EDGE('',*,*,#16944,.T.); +#16944 = EDGE_CURVE('',#16937,#16034,#16945,.T.); +#16945 = LINE('',#16946,#16947); +#16946 = CARTESIAN_POINT('',(2.46,-4.E-02,-3.48)); +#16947 = VECTOR('',#16948,1.); +#16948 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#16949 = ORIENTED_EDGE('',*,*,#16033,.F.); +#16950 = PLANE('',#16951); +#16951 = AXIS2_PLACEMENT_3D('',#16952,#16953,#16954); +#16952 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#16953 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#16954 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#16955 = ADVANCED_FACE('',(#16956),#16967,.T.); +#16956 = FACE_BOUND('',#16957,.F.); +#16957 = EDGE_LOOP('',(#16958,#16959,#16965,#16966)); +#16958 = ORIENTED_EDGE('',*,*,#16896,.F.); +#16959 = ORIENTED_EDGE('',*,*,#16960,.T.); +#16960 = EDGE_CURVE('',#16889,#16937,#16961,.T.); +#16961 = LINE('',#16962,#16963); +#16962 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#16963 = VECTOR('',#16964,1.); +#16964 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#16965 = ORIENTED_EDGE('',*,*,#16944,.T.); +#16966 = ORIENTED_EDGE('',*,*,#16058,.F.); +#16967 = PLANE('',#16968); +#16968 = AXIS2_PLACEMENT_3D('',#16969,#16970,#16971); +#16969 = CARTESIAN_POINT('',(2.82,-0.22,-3.3)); +#16970 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#16971 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#16972 = ADVANCED_FACE('',(#16973),#16998,.F.); +#16973 = FACE_BOUND('',#16974,.T.); +#16974 = EDGE_LOOP('',(#16975,#16983,#16991,#16997)); +#16975 = ORIENTED_EDGE('',*,*,#16976,.F.); +#16976 = EDGE_CURVE('',#16977,#16075,#16979,.T.); +#16977 = VERTEX_POINT('',#16978); +#16978 = CARTESIAN_POINT('',(4.88,0.12,-3.4)); +#16979 = LINE('',#16980,#16981); +#16980 = CARTESIAN_POINT('',(4.853333333333,0.146666666667, + -3.373333333333)); +#16981 = VECTOR('',#16982,1.); +#16982 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#16983 = ORIENTED_EDGE('',*,*,#16984,.T.); +#16984 = EDGE_CURVE('',#16977,#16985,#16987,.T.); +#16985 = VERTEX_POINT('',#16986); +#16986 = CARTESIAN_POINT('',(4.88,-0.12,-3.4)); +#16987 = LINE('',#16988,#16989); +#16988 = CARTESIAN_POINT('',(4.88,0.32,-3.4)); +#16989 = VECTOR('',#16990,1.); +#16990 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#16991 = ORIENTED_EDGE('',*,*,#16992,.T.); +#16992 = EDGE_CURVE('',#16985,#16077,#16993,.T.); +#16993 = LINE('',#16994,#16995); +#16994 = CARTESIAN_POINT('',(4.96,-4.E-02,-3.48)); +#16995 = VECTOR('',#16996,1.); +#16996 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#16997 = ORIENTED_EDGE('',*,*,#16074,.F.); +#16998 = PLANE('',#16999); +#16999 = AXIS2_PLACEMENT_3D('',#17000,#17001,#17002); +#17000 = CARTESIAN_POINT('',(4.78,0.32,-3.3)); +#17001 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#17002 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#17003 = ADVANCED_FACE('',(#17004),#17022,.T.); +#17004 = FACE_BOUND('',#17005,.F.); +#17005 = EDGE_LOOP('',(#17006,#17014,#17020,#17021)); +#17006 = ORIENTED_EDGE('',*,*,#17007,.F.); +#17007 = EDGE_CURVE('',#17008,#16106,#17010,.T.); +#17008 = VERTEX_POINT('',#17009); +#17009 = CARTESIAN_POINT('',(5.12,-0.12,-3.4)); +#17010 = LINE('',#17011,#17012); +#17011 = CARTESIAN_POINT('',(5.146666666667,-0.146666666667, + -3.373333333333)); +#17012 = VECTOR('',#17013,1.); +#17013 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#17014 = ORIENTED_EDGE('',*,*,#17015,.T.); +#17015 = EDGE_CURVE('',#17008,#16985,#17016,.T.); +#17016 = LINE('',#17017,#17018); +#17017 = CARTESIAN_POINT('',(5.32,-0.12,-3.4)); +#17018 = VECTOR('',#17019,1.); +#17019 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17020 = ORIENTED_EDGE('',*,*,#16992,.T.); +#17021 = ORIENTED_EDGE('',*,*,#16113,.F.); +#17022 = PLANE('',#17023); +#17023 = AXIS2_PLACEMENT_3D('',#17024,#17025,#17026); +#17024 = CARTESIAN_POINT('',(5.32,-0.22,-3.3)); +#17025 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#17026 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#17027 = ADVANCED_FACE('',(#17028),#17046,.T.); +#17028 = FACE_BOUND('',#17029,.F.); +#17029 = EDGE_LOOP('',(#17030,#17038,#17044,#17045)); +#17030 = ORIENTED_EDGE('',*,*,#17031,.F.); +#17031 = EDGE_CURVE('',#17032,#16130,#17034,.T.); +#17032 = VERTEX_POINT('',#17033); +#17033 = CARTESIAN_POINT('',(5.12,0.12,-3.4)); +#17034 = LINE('',#17035,#17036); +#17035 = CARTESIAN_POINT('',(5.253333333333,0.253333333333, + -3.266666666667)); +#17036 = VECTOR('',#17037,1.); +#17037 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#17038 = ORIENTED_EDGE('',*,*,#17039,.T.); +#17039 = EDGE_CURVE('',#17032,#17008,#17040,.T.); +#17040 = LINE('',#17041,#17042); +#17041 = CARTESIAN_POINT('',(5.12,0.32,-3.4)); +#17042 = VECTOR('',#17043,1.); +#17043 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17044 = ORIENTED_EDGE('',*,*,#17007,.T.); +#17045 = ORIENTED_EDGE('',*,*,#16129,.F.); +#17046 = PLANE('',#17047); +#17047 = AXIS2_PLACEMENT_3D('',#17048,#17049,#17050); +#17048 = CARTESIAN_POINT('',(5.22,0.32,-3.3)); +#17049 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#17050 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#17051 = ADVANCED_FACE('',(#17052),#17063,.T.); +#17052 = FACE_BOUND('',#17053,.T.); +#17053 = EDGE_LOOP('',(#17054,#17055,#17061,#17062)); +#17054 = ORIENTED_EDGE('',*,*,#17031,.F.); +#17055 = ORIENTED_EDGE('',*,*,#17056,.T.); +#17056 = EDGE_CURVE('',#17032,#16977,#17057,.T.); +#17057 = LINE('',#17058,#17059); +#17058 = CARTESIAN_POINT('',(5.32,0.12,-3.4)); +#17059 = VECTOR('',#17060,1.); +#17060 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17061 = ORIENTED_EDGE('',*,*,#16976,.T.); +#17062 = ORIENTED_EDGE('',*,*,#16156,.F.); +#17063 = PLANE('',#17064); +#17064 = AXIS2_PLACEMENT_3D('',#17065,#17066,#17067); +#17065 = CARTESIAN_POINT('',(5.32,0.22,-3.3)); +#17066 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187 + )); +#17067 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#17068 = ADVANCED_FACE('',(#17069),#17080,.F.); +#17069 = FACE_BOUND('',#17070,.F.); +#17070 = EDGE_LOOP('',(#17071,#17072,#17073,#17079)); +#17071 = ORIENTED_EDGE('',*,*,#16187,.T.); +#17072 = ORIENTED_EDGE('',*,*,#16235,.T.); +#17073 = ORIENTED_EDGE('',*,*,#17074,.F.); +#17074 = EDGE_CURVE('',#16309,#16236,#17075,.T.); +#17075 = LINE('',#17076,#17077); +#17076 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#17077 = VECTOR('',#17078,1.); +#17078 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17079 = ORIENTED_EDGE('',*,*,#16308,.F.); +#17080 = PLANE('',#17081); +#17081 = AXIS2_PLACEMENT_3D('',#17082,#17083,#17084); +#17082 = CARTESIAN_POINT('',(7.82,0.32,-0.9)); +#17083 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#17084 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#17085 = ADVANCED_FACE('',(#17086),#17127,.F.); +#17086 = FACE_BOUND('',#17087,.T.); +#17087 = EDGE_LOOP('',(#17088,#17098,#17106,#17114,#17120,#17121)); +#17088 = ORIENTED_EDGE('',*,*,#17089,.F.); +#17089 = EDGE_CURVE('',#17090,#17092,#17094,.T.); +#17090 = VERTEX_POINT('',#17091); +#17091 = CARTESIAN_POINT('',(7.38,0.12,-3.4)); +#17092 = VERTEX_POINT('',#17093); +#17093 = CARTESIAN_POINT('',(7.182447406934,0.351192514695, + -3.202447406934)); +#17094 = LINE('',#17095,#17096); +#17095 = CARTESIAN_POINT('',(7.346150901889,0.159613036666, + -3.366150901889)); +#17096 = VECTOR('',#17097,1.); +#17097 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#17098 = ORIENTED_EDGE('',*,*,#17099,.T.); +#17099 = EDGE_CURVE('',#17090,#17100,#17102,.T.); +#17100 = VERTEX_POINT('',#17101); +#17101 = CARTESIAN_POINT('',(7.38,-0.12,-3.4)); +#17102 = LINE('',#17103,#17104); +#17103 = CARTESIAN_POINT('',(7.38,0.32,-3.4)); +#17104 = VECTOR('',#17105,1.); +#17105 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17106 = ORIENTED_EDGE('',*,*,#17107,.T.); +#17107 = EDGE_CURVE('',#17100,#17108,#17110,.T.); +#17108 = VERTEX_POINT('',#17109); +#17109 = CARTESIAN_POINT('',(7.182447406934,-0.288807485305, + -3.202447406934)); +#17110 = LINE('',#17111,#17112); +#17111 = CARTESIAN_POINT('',(7.461511443392,-5.034896900541E-02, + -3.481511443392)); +#17112 = VECTOR('',#17113,1.); +#17113 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#17114 = ORIENTED_EDGE('',*,*,#17115,.T.); +#17115 = EDGE_CURVE('',#17108,#16204,#17116,.T.); +#17116 = LINE('',#17117,#17118); +#17117 = CARTESIAN_POINT('',(7.414309165527,-0.325417236662, + -3.434309165527)); +#17118 = VECTOR('',#17119,1.); +#17119 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#17120 = ORIENTED_EDGE('',*,*,#16201,.F.); +#17121 = ORIENTED_EDGE('',*,*,#17122,.F.); +#17122 = EDGE_CURVE('',#17092,#16202,#17123,.T.); +#17123 = LINE('',#17124,#17125); +#17124 = CARTESIAN_POINT('',(6.958413132695,0.386566347469, + -2.978413132695)); +#17125 = VECTOR('',#17126,1.); +#17126 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#17127 = PLANE('',#17128); +#17128 = AXIS2_PLACEMENT_3D('',#17129,#17130,#17131); +#17129 = CARTESIAN_POINT('',(7.28,0.32,-3.3)); +#17130 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#17131 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#17132 = ADVANCED_FACE('',(#17133),#17153,.F.); +#17133 = FACE_BOUND('',#17134,.F.); +#17134 = EDGE_LOOP('',(#17135,#17136,#17137,#17138,#17139,#17147)); +#17135 = ORIENTED_EDGE('',*,*,#16316,.F.); +#17136 = ORIENTED_EDGE('',*,*,#17074,.T.); +#17137 = ORIENTED_EDGE('',*,*,#16243,.T.); +#17138 = ORIENTED_EDGE('',*,*,#17122,.F.); +#17139 = ORIENTED_EDGE('',*,*,#17140,.F.); +#17140 = EDGE_CURVE('',#17141,#17092,#17143,.T.); +#17141 = VERTEX_POINT('',#17142); +#17142 = CARTESIAN_POINT('',(7.817552593066,0.351192514695, + -3.202447406934)); +#17143 = LINE('',#17144,#17145); +#17144 = CARTESIAN_POINT('',(7.82,0.351192514695,-3.202447406934)); +#17145 = VECTOR('',#17146,1.); +#17146 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17147 = ORIENTED_EDGE('',*,*,#17148,.T.); +#17148 = EDGE_CURVE('',#17141,#16282,#17149,.T.); +#17149 = LINE('',#17150,#17151); +#17150 = CARTESIAN_POINT('',(8.199616963064,0.411518467852, + -2.820383036936)); +#17151 = VECTOR('',#17152,1.); +#17152 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#17153 = PLANE('',#17154); +#17154 = AXIS2_PLACEMENT_3D('',#17155,#17156,#17157); +#17155 = CARTESIAN_POINT('',(7.82,0.62,-1.5)); +#17156 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#17157 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#17158 = ADVANCED_FACE('',(#17159),#17170,.F.); +#17159 = FACE_BOUND('',#17160,.F.); +#17160 = EDGE_LOOP('',(#17161,#17167,#17168,#17169)); +#17161 = ORIENTED_EDGE('',*,*,#17162,.T.); +#17162 = EDGE_CURVE('',#16292,#16212,#17163,.T.); +#17163 = LINE('',#17164,#17165); +#17164 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#17165 = VECTOR('',#17166,1.); +#17166 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17167 = ORIENTED_EDGE('',*,*,#16219,.T.); +#17168 = ORIENTED_EDGE('',*,*,#16265,.F.); +#17169 = ORIENTED_EDGE('',*,*,#16299,.F.); +#17170 = PLANE('',#17171); +#17171 = AXIS2_PLACEMENT_3D('',#17172,#17173,#17174); +#17172 = CARTESIAN_POINT('',(7.82,-2.E-02,-1.5)); +#17173 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#17174 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#17175 = ADVANCED_FACE('',(#17176),#17196,.F.); +#17176 = FACE_BOUND('',#17177,.F.); +#17177 = EDGE_LOOP('',(#17178,#17179,#17187,#17193,#17194,#17195)); +#17178 = ORIENTED_EDGE('',*,*,#16291,.F.); +#17179 = ORIENTED_EDGE('',*,*,#17180,.F.); +#17180 = EDGE_CURVE('',#17181,#16284,#17183,.T.); +#17181 = VERTEX_POINT('',#17182); +#17182 = CARTESIAN_POINT('',(7.817552593066,-0.288807485305, + -3.202447406934)); +#17183 = LINE('',#17184,#17185); +#17184 = CARTESIAN_POINT('',(7.743720930233,-0.300465116279, + -3.276279069767)); +#17185 = VECTOR('',#17186,1.); +#17186 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#17187 = ORIENTED_EDGE('',*,*,#17188,.T.); +#17188 = EDGE_CURVE('',#17181,#17108,#17189,.T.); +#17189 = LINE('',#17190,#17191); +#17190 = CARTESIAN_POINT('',(7.82,-0.288807485305,-3.202447406934)); +#17191 = VECTOR('',#17192,1.); +#17192 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17193 = ORIENTED_EDGE('',*,*,#17115,.T.); +#17194 = ORIENTED_EDGE('',*,*,#16211,.T.); +#17195 = ORIENTED_EDGE('',*,*,#17162,.F.); +#17196 = PLANE('',#17197); +#17197 = AXIS2_PLACEMENT_3D('',#17198,#17199,#17200); +#17198 = CARTESIAN_POINT('',(7.82,-0.32,-3.4)); +#17199 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#17200 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#17201 = ADVANCED_FACE('',(#17202),#17229,.T.); +#17202 = FACE_BOUND('',#17203,.F.); +#17203 = EDGE_LOOP('',(#17204,#17212,#17220,#17226,#17227,#17228)); +#17204 = ORIENTED_EDGE('',*,*,#17205,.F.); +#17205 = EDGE_CURVE('',#17206,#17141,#17208,.T.); +#17206 = VERTEX_POINT('',#17207); +#17207 = CARTESIAN_POINT('',(7.62,0.12,-3.4)); +#17208 = LINE('',#17209,#17210); +#17209 = CARTESIAN_POINT('',(7.74881689775,0.270752273427,-3.27118310225 + )); +#17210 = VECTOR('',#17211,1.); +#17211 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#17212 = ORIENTED_EDGE('',*,*,#17213,.T.); +#17213 = EDGE_CURVE('',#17206,#17214,#17216,.T.); +#17214 = VERTEX_POINT('',#17215); +#17215 = CARTESIAN_POINT('',(7.62,-0.12,-3.4)); +#17216 = LINE('',#17217,#17218); +#17217 = CARTESIAN_POINT('',(7.62,0.32,-3.4)); +#17218 = VECTOR('',#17219,1.); +#17219 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17220 = ORIENTED_EDGE('',*,*,#17221,.T.); +#17221 = EDGE_CURVE('',#17214,#17181,#17222,.T.); +#17222 = LINE('',#17223,#17224); +#17223 = CARTESIAN_POINT('',(7.655697812072,-0.150503562587, + -3.364302187928)); +#17224 = VECTOR('',#17225,1.); +#17225 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#17226 = ORIENTED_EDGE('',*,*,#17180,.T.); +#17227 = ORIENTED_EDGE('',*,*,#16281,.F.); +#17228 = ORIENTED_EDGE('',*,*,#17148,.F.); +#17229 = PLANE('',#17230); +#17230 = AXIS2_PLACEMENT_3D('',#17231,#17232,#17233); +#17231 = CARTESIAN_POINT('',(7.72,0.32,-3.3)); +#17232 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#17233 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#17234 = ADVANCED_FACE('',(#17235),#17241,.F.); +#17235 = FACE_BOUND('',#17236,.F.); +#17236 = EDGE_LOOP('',(#17237,#17238,#17239,#17240)); +#17237 = ORIENTED_EDGE('',*,*,#16410,.F.); +#17238 = ORIENTED_EDGE('',*,*,#16386,.F.); +#17239 = ORIENTED_EDGE('',*,*,#16371,.T.); +#17240 = ORIENTED_EDGE('',*,*,#16338,.T.); +#17241 = PLANE('',#17242); +#17242 = AXIS2_PLACEMENT_3D('',#17243,#17244,#17245); +#17243 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#17244 = DIRECTION('',(-0.,0.,-1.)); +#17245 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17246 = ADVANCED_FACE('',(#17247),#17253,.F.); +#17247 = FACE_BOUND('',#17248,.F.); +#17248 = EDGE_LOOP('',(#17249,#17250,#17251,#17252)); +#17249 = ORIENTED_EDGE('',*,*,#16458,.F.); +#17250 = ORIENTED_EDGE('',*,*,#16434,.F.); +#17251 = ORIENTED_EDGE('',*,*,#16508,.T.); +#17252 = ORIENTED_EDGE('',*,*,#16489,.T.); +#17253 = PLANE('',#17254); +#17254 = AXIS2_PLACEMENT_3D('',#17255,#17256,#17257); +#17255 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#17256 = DIRECTION('',(-0.,0.,-1.)); +#17257 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17258 = ADVANCED_FACE('',(#17259),#17265,.F.); +#17259 = FACE_BOUND('',#17260,.F.); +#17260 = EDGE_LOOP('',(#17261,#17262,#17263,#17264)); +#17261 = ORIENTED_EDGE('',*,*,#16602,.F.); +#17262 = ORIENTED_EDGE('',*,*,#16578,.F.); +#17263 = ORIENTED_EDGE('',*,*,#16563,.T.); +#17264 = ORIENTED_EDGE('',*,*,#16530,.T.); +#17265 = PLANE('',#17266); +#17266 = AXIS2_PLACEMENT_3D('',#17267,#17268,#17269); +#17267 = CARTESIAN_POINT('',(5.32,-0.32,6.5)); +#17268 = DIRECTION('',(-0.,0.,-1.)); +#17269 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17270 = ADVANCED_FACE('',(#17271),#17277,.F.); +#17271 = FACE_BOUND('',#17272,.F.); +#17272 = EDGE_LOOP('',(#17273,#17274,#17275,#17276)); +#17273 = ORIENTED_EDGE('',*,*,#16626,.F.); +#17274 = ORIENTED_EDGE('',*,*,#16698,.F.); +#17275 = ORIENTED_EDGE('',*,*,#16683,.T.); +#17276 = ORIENTED_EDGE('',*,*,#16657,.T.); +#17277 = PLANE('',#17278); +#17278 = AXIS2_PLACEMENT_3D('',#17279,#17280,#17281); +#17279 = CARTESIAN_POINT('',(7.82,-0.32,6.5)); +#17280 = DIRECTION('',(-0.,0.,-1.)); +#17281 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17282 = ADVANCED_FACE('',(#17283),#17294,.T.); +#17283 = FACE_BOUND('',#17284,.T.); +#17284 = EDGE_LOOP('',(#17285,#17286,#17292,#17293)); +#17285 = ORIENTED_EDGE('',*,*,#16847,.F.); +#17286 = ORIENTED_EDGE('',*,*,#17287,.T.); +#17287 = EDGE_CURVE('',#16848,#16715,#17288,.T.); +#17288 = LINE('',#17289,#17290); +#17289 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#17290 = VECTOR('',#17291,1.); +#17291 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17292 = ORIENTED_EDGE('',*,*,#16714,.T.); +#17293 = ORIENTED_EDGE('',*,*,#16770,.F.); +#17294 = PLANE('',#17295); +#17295 = AXIS2_PLACEMENT_3D('',#17296,#17297,#17298); +#17296 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#17297 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#17298 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#17299 = ADVANCED_FACE('',(#17300),#17311,.F.); +#17300 = FACE_BOUND('',#17301,.F.); +#17301 = EDGE_LOOP('',(#17302,#17303,#17304,#17305)); +#17302 = ORIENTED_EDGE('',*,*,#16855,.F.); +#17303 = ORIENTED_EDGE('',*,*,#17287,.T.); +#17304 = ORIENTED_EDGE('',*,*,#16724,.T.); +#17305 = ORIENTED_EDGE('',*,*,#17306,.F.); +#17306 = EDGE_CURVE('',#16856,#16725,#17307,.T.); +#17307 = LINE('',#17308,#17309); +#17308 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#17309 = VECTOR('',#17310,1.); +#17310 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17311 = PLANE('',#17312); +#17312 = AXIS2_PLACEMENT_3D('',#17313,#17314,#17315); +#17313 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#17314 = DIRECTION('',(0.,0.,1.)); +#17315 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17316 = ADVANCED_FACE('',(#17317),#17323,.T.); +#17317 = FACE_BOUND('',#17318,.F.); +#17318 = EDGE_LOOP('',(#17319,#17320,#17321,#17322)); +#17319 = ORIENTED_EDGE('',*,*,#16863,.F.); +#17320 = ORIENTED_EDGE('',*,*,#17306,.T.); +#17321 = ORIENTED_EDGE('',*,*,#16732,.T.); +#17322 = ORIENTED_EDGE('',*,*,#16830,.F.); +#17323 = PLANE('',#17324); +#17324 = AXIS2_PLACEMENT_3D('',#17325,#17326,#17327); +#17325 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#17326 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#17327 = DIRECTION('',(1.,-1.224646799148E-16,-5.515863360725E-29)); +#17328 = ADVANCED_FACE('',(#17329),#17335,.F.); +#17329 = FACE_BOUND('',#17330,.F.); +#17330 = EDGE_LOOP('',(#17331,#17332,#17333,#17334)); +#17331 = ORIENTED_EDGE('',*,*,#16960,.F.); +#17332 = ORIENTED_EDGE('',*,*,#16888,.F.); +#17333 = ORIENTED_EDGE('',*,*,#16912,.T.); +#17334 = ORIENTED_EDGE('',*,*,#16936,.T.); +#17335 = PLANE('',#17336); +#17336 = AXIS2_PLACEMENT_3D('',#17337,#17338,#17339); +#17337 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#17338 = DIRECTION('',(0.,0.,1.)); +#17339 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17340 = ADVANCED_FACE('',(#17341),#17347,.F.); +#17341 = FACE_BOUND('',#17342,.F.); +#17342 = EDGE_LOOP('',(#17343,#17344,#17345,#17346)); +#17343 = ORIENTED_EDGE('',*,*,#17015,.F.); +#17344 = ORIENTED_EDGE('',*,*,#17039,.F.); +#17345 = ORIENTED_EDGE('',*,*,#17056,.T.); +#17346 = ORIENTED_EDGE('',*,*,#16984,.T.); +#17347 = PLANE('',#17348); +#17348 = AXIS2_PLACEMENT_3D('',#17349,#17350,#17351); +#17349 = CARTESIAN_POINT('',(5.32,0.32,-3.4)); +#17350 = DIRECTION('',(0.,0.,1.)); +#17351 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17352 = ADVANCED_FACE('',(#17353),#17364,.T.); +#17353 = FACE_BOUND('',#17354,.T.); +#17354 = EDGE_LOOP('',(#17355,#17356,#17362,#17363)); +#17355 = ORIENTED_EDGE('',*,*,#17205,.F.); +#17356 = ORIENTED_EDGE('',*,*,#17357,.T.); +#17357 = EDGE_CURVE('',#17206,#17090,#17358,.T.); +#17358 = LINE('',#17359,#17360); +#17359 = CARTESIAN_POINT('',(7.82,0.12,-3.4)); +#17360 = VECTOR('',#17361,1.); +#17361 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17362 = ORIENTED_EDGE('',*,*,#17089,.T.); +#17363 = ORIENTED_EDGE('',*,*,#17140,.F.); +#17364 = PLANE('',#17365); +#17365 = AXIS2_PLACEMENT_3D('',#17366,#17367,#17368); +#17366 = CARTESIAN_POINT('',(7.82,0.235596257347,-3.301223703467)); +#17367 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#17368 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#17369 = ADVANCED_FACE('',(#17370),#17381,.F.); +#17370 = FACE_BOUND('',#17371,.F.); +#17371 = EDGE_LOOP('',(#17372,#17373,#17374,#17375)); +#17372 = ORIENTED_EDGE('',*,*,#17213,.F.); +#17373 = ORIENTED_EDGE('',*,*,#17357,.T.); +#17374 = ORIENTED_EDGE('',*,*,#17099,.T.); +#17375 = ORIENTED_EDGE('',*,*,#17376,.F.); +#17376 = EDGE_CURVE('',#17214,#17100,#17377,.T.); +#17377 = LINE('',#17378,#17379); +#17378 = CARTESIAN_POINT('',(7.82,-0.12,-3.4)); +#17379 = VECTOR('',#17380,1.); +#17380 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17381 = PLANE('',#17382); +#17382 = AXIS2_PLACEMENT_3D('',#17383,#17384,#17385); +#17383 = CARTESIAN_POINT('',(7.82,0.32,-3.4)); +#17384 = DIRECTION('',(0.,0.,1.)); +#17385 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17386 = ADVANCED_FACE('',(#17387),#17393,.T.); +#17387 = FACE_BOUND('',#17388,.F.); +#17388 = EDGE_LOOP('',(#17389,#17390,#17391,#17392)); +#17389 = ORIENTED_EDGE('',*,*,#17221,.F.); +#17390 = ORIENTED_EDGE('',*,*,#17376,.T.); +#17391 = ORIENTED_EDGE('',*,*,#17107,.T.); +#17392 = ORIENTED_EDGE('',*,*,#17188,.F.); +#17393 = PLANE('',#17394); +#17394 = AXIS2_PLACEMENT_3D('',#17395,#17396,#17397); +#17395 = CARTESIAN_POINT('',(7.82,-0.204403742653,-3.301223703467)); +#17396 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#17397 = DIRECTION('',(1.,-1.224646799148E-16,-5.515863360725E-29)); +#17398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#17402)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#17399,#17400,#17401)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#17399 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#17400 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#17401 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#17402 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#17399, + 'distance_accuracy_value','confusion accuracy'); +#17403 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#17404,#17406); +#17404 = ( REPRESENTATION_RELATIONSHIP('','',#13202,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#17405) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#17405 = ITEM_DEFINED_TRANSFORMATION('','',#11,#107); +#17406 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #17407); +#17407 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('24','J3','',#5,#13197,$); +#17408 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#13199)); +#17409 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#17410,#17412); +#17410 = ( REPRESENTATION_RELATIONSHIP('','',#13202,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#17411) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#17411 = ITEM_DEFINED_TRANSFORMATION('','',#11,#111); +#17412 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #17413); +#17413 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('25','J4','',#5,#13197,$); +#17414 = SHAPE_DEFINITION_REPRESENTATION(#17415,#17421); +#17415 = PRODUCT_DEFINITION_SHAPE('','',#17416); +#17416 = PRODUCT_DEFINITION('design','',#17417,#17420); +#17417 = PRODUCT_DEFINITION_FORMATION('','',#17418); +#17418 = PRODUCT('JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', + 'JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical','',(#17419)); +#17419 = PRODUCT_CONTEXT('',#2,'mechanical'); +#17420 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#17421 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#17422),#20943); +#17422 = MANIFOLD_SOLID_BREP('',#17423); +#17423 = CLOSED_SHELL('',(#17424,#17496,#17535,#17559,#17624,#17648, + #17768,#17792,#17857,#17882,#17931,#17948,#17972,#17989,#18159, + #18183,#18417,#18441,#18474,#18498,#18529,#18546,#18579,#18603, + #18634,#18651,#18684,#18708,#18739,#18751,#18784,#18801,#18818, + #18830,#18944,#18961,#18978,#18995,#19012,#19029,#19046,#19063, + #19080,#19097,#19114,#19131,#19148,#19165,#19182,#19194,#19211, + #19228,#19245,#19291,#19337,#19383,#19414,#19438,#19462,#19479, + #19510,#19534,#19558,#19575,#19606,#19630,#19654,#19671,#19734, + #19758,#19814,#19831,#19862,#19886,#19910,#19927,#19990,#20014, + #20070,#20087,#20118,#20142,#20166,#20183,#20214,#20238,#20262, + #20279,#20310,#20334,#20358,#20375,#20422,#20453,#20465,#20482, + #20508,#20541,#20572,#20596,#20620,#20637,#20684,#20715,#20727, + #20744,#20770,#20803,#20815,#20827,#20839,#20856,#20873,#20885, + #20897,#20914,#20931)); +#17424 = ADVANCED_FACE('',(#17425),#17491,.T.); +#17425 = FACE_BOUND('',#17426,.T.); +#17426 = EDGE_LOOP('',(#17427,#17437,#17445,#17453,#17461,#17469,#17477, + #17485)); +#17427 = ORIENTED_EDGE('',*,*,#17428,.T.); +#17428 = EDGE_CURVE('',#17429,#17431,#17433,.T.); +#17429 = VERTEX_POINT('',#17430); +#17430 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#17431 = VERTEX_POINT('',#17432); +#17432 = CARTESIAN_POINT('',(-2.45,0.5,7.)); +#17433 = LINE('',#17434,#17435); +#17434 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#17435 = VECTOR('',#17436,1.); +#17436 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17437 = ORIENTED_EDGE('',*,*,#17438,.T.); +#17438 = EDGE_CURVE('',#17431,#17439,#17441,.T.); +#17439 = VERTEX_POINT('',#17440); +#17440 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#17441 = LINE('',#17442,#17443); +#17442 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#17443 = VECTOR('',#17444,1.); +#17444 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17445 = ORIENTED_EDGE('',*,*,#17446,.T.); +#17446 = EDGE_CURVE('',#17439,#17447,#17449,.T.); +#17447 = VERTEX_POINT('',#17448); +#17448 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#17449 = LINE('',#17450,#17451); +#17450 = CARTESIAN_POINT('',(-2.45,-3.4,7.)); +#17451 = VECTOR('',#17452,1.); +#17452 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17453 = ORIENTED_EDGE('',*,*,#17454,.T.); +#17454 = EDGE_CURVE('',#17447,#17455,#17457,.T.); +#17455 = VERTEX_POINT('',#17456); +#17456 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#17457 = LINE('',#17458,#17459); +#17458 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#17459 = VECTOR('',#17460,1.); +#17460 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17461 = ORIENTED_EDGE('',*,*,#17462,.T.); +#17462 = EDGE_CURVE('',#17455,#17463,#17465,.T.); +#17463 = VERTEX_POINT('',#17464); +#17464 = CARTESIAN_POINT('',(6.8,0.5,7.)); +#17465 = LINE('',#17466,#17467); +#17466 = CARTESIAN_POINT('',(7.45,0.5,7.)); +#17467 = VECTOR('',#17468,1.); +#17468 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17469 = ORIENTED_EDGE('',*,*,#17470,.F.); +#17470 = EDGE_CURVE('',#17471,#17463,#17473,.T.); +#17471 = VERTEX_POINT('',#17472); +#17472 = CARTESIAN_POINT('',(6.8,-2.85,7.)); +#17473 = LINE('',#17474,#17475); +#17474 = CARTESIAN_POINT('',(6.8,-2.65,7.)); +#17475 = VECTOR('',#17476,1.); +#17476 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17477 = ORIENTED_EDGE('',*,*,#17478,.F.); +#17478 = EDGE_CURVE('',#17479,#17471,#17481,.T.); +#17479 = VERTEX_POINT('',#17480); +#17480 = CARTESIAN_POINT('',(-1.8,-2.85,7.)); +#17481 = LINE('',#17482,#17483); +#17482 = CARTESIAN_POINT('',(-1.6,-2.85,7.)); +#17483 = VECTOR('',#17484,1.); +#17484 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17485 = ORIENTED_EDGE('',*,*,#17486,.F.); +#17486 = EDGE_CURVE('',#17429,#17479,#17487,.T.); +#17487 = LINE('',#17488,#17489); +#17488 = CARTESIAN_POINT('',(-1.8,0.5,7.)); +#17489 = VECTOR('',#17490,1.); +#17490 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17491 = PLANE('',#17492); +#17492 = AXIS2_PLACEMENT_3D('',#17493,#17494,#17495); +#17493 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#17494 = DIRECTION('',(0.,0.,1.)); +#17495 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17496 = ADVANCED_FACE('',(#17497),#17530,.T.); +#17497 = FACE_BOUND('',#17498,.T.); +#17498 = EDGE_LOOP('',(#17499,#17509,#17517,#17523,#17524)); +#17499 = ORIENTED_EDGE('',*,*,#17500,.T.); +#17500 = EDGE_CURVE('',#17501,#17503,#17505,.T.); +#17501 = VERTEX_POINT('',#17502); +#17502 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#17503 = VERTEX_POINT('',#17504); +#17504 = CARTESIAN_POINT('',(-1.6,0.5,3.65)); +#17505 = LINE('',#17506,#17507); +#17506 = CARTESIAN_POINT('',(-1.6,0.5,5.325)); +#17507 = VECTOR('',#17508,1.); +#17508 = DIRECTION('',(-0.,0.,-1.)); +#17509 = ORIENTED_EDGE('',*,*,#17510,.T.); +#17510 = EDGE_CURVE('',#17503,#17511,#17513,.T.); +#17511 = VERTEX_POINT('',#17512); +#17512 = CARTESIAN_POINT('',(-2.45,0.5,3.65)); +#17513 = LINE('',#17514,#17515); +#17514 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#17515 = VECTOR('',#17516,1.); +#17516 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17517 = ORIENTED_EDGE('',*,*,#17518,.T.); +#17518 = EDGE_CURVE('',#17511,#17431,#17519,.T.); +#17519 = LINE('',#17520,#17521); +#17520 = CARTESIAN_POINT('',(-2.45,0.5,1.825)); +#17521 = VECTOR('',#17522,1.); +#17522 = DIRECTION('',(0.,0.,1.)); +#17523 = ORIENTED_EDGE('',*,*,#17428,.F.); +#17524 = ORIENTED_EDGE('',*,*,#17525,.T.); +#17525 = EDGE_CURVE('',#17429,#17501,#17526,.T.); +#17526 = LINE('',#17527,#17528); +#17527 = CARTESIAN_POINT('',(1.4,0.5,3.8)); +#17528 = VECTOR('',#17529,1.); +#17529 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#17530 = PLANE('',#17531); +#17531 = AXIS2_PLACEMENT_3D('',#17532,#17533,#17534); +#17532 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#17533 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17534 = DIRECTION('',(0.,-0.,1.)); +#17535 = ADVANCED_FACE('',(#17536),#17554,.F.); +#17536 = FACE_BOUND('',#17537,.T.); +#17537 = EDGE_LOOP('',(#17538,#17539,#17540,#17548)); +#17538 = ORIENTED_EDGE('',*,*,#17525,.F.); +#17539 = ORIENTED_EDGE('',*,*,#17486,.T.); +#17540 = ORIENTED_EDGE('',*,*,#17541,.T.); +#17541 = EDGE_CURVE('',#17479,#17542,#17544,.T.); +#17542 = VERTEX_POINT('',#17543); +#17543 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#17544 = LINE('',#17545,#17546); +#17545 = CARTESIAN_POINT('',(-1.141666666667,-2.191666666667, + 6.341666666667)); +#17546 = VECTOR('',#17547,1.); +#17547 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#17548 = ORIENTED_EDGE('',*,*,#17549,.F.); +#17549 = EDGE_CURVE('',#17501,#17542,#17550,.T.); +#17550 = LINE('',#17551,#17552); +#17551 = CARTESIAN_POINT('',(-1.6,0.5,6.8)); +#17552 = VECTOR('',#17553,1.); +#17553 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17554 = PLANE('',#17555); +#17555 = AXIS2_PLACEMENT_3D('',#17556,#17557,#17558); +#17556 = CARTESIAN_POINT('',(-1.7,0.5,6.9)); +#17557 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#17558 = DIRECTION('',(1.224646799147E-16,1.,-2.105272540809E-29)); +#17559 = ADVANCED_FACE('',(#17560),#17619,.F.); +#17560 = FACE_BOUND('',#17561,.F.); +#17561 = EDGE_LOOP('',(#17562,#17572,#17580,#17588,#17596,#17605,#17611, + #17612,#17613)); +#17562 = ORIENTED_EDGE('',*,*,#17563,.F.); +#17563 = EDGE_CURVE('',#17564,#17566,#17568,.T.); +#17564 = VERTEX_POINT('',#17565); +#17565 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#17566 = VERTEX_POINT('',#17567); +#17567 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#17568 = LINE('',#17569,#17570); +#17569 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#17570 = VECTOR('',#17571,1.); +#17571 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17572 = ORIENTED_EDGE('',*,*,#17573,.T.); +#17573 = EDGE_CURVE('',#17564,#17574,#17576,.T.); +#17574 = VERTEX_POINT('',#17575); +#17575 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#17576 = LINE('',#17577,#17578); +#17577 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#17578 = VECTOR('',#17579,1.); +#17579 = DIRECTION('',(0.,0.,1.)); +#17580 = ORIENTED_EDGE('',*,*,#17581,.T.); +#17581 = EDGE_CURVE('',#17574,#17582,#17584,.T.); +#17582 = VERTEX_POINT('',#17583); +#17583 = CARTESIAN_POINT('',(-2.45,1.5,7.)); +#17584 = LINE('',#17585,#17586); +#17585 = CARTESIAN_POINT('',(-2.45,2.35,7.)); +#17586 = VECTOR('',#17587,1.); +#17587 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17588 = ORIENTED_EDGE('',*,*,#17589,.T.); +#17589 = EDGE_CURVE('',#17582,#17590,#17592,.T.); +#17590 = VERTEX_POINT('',#17591); +#17591 = CARTESIAN_POINT('',(-2.45,1.5,4.15)); +#17592 = LINE('',#17593,#17594); +#17593 = CARTESIAN_POINT('',(-2.45,1.5,3.5)); +#17594 = VECTOR('',#17595,1.); +#17595 = DIRECTION('',(-0.,0.,-1.)); +#17596 = ORIENTED_EDGE('',*,*,#17597,.F.); +#17597 = EDGE_CURVE('',#17598,#17590,#17600,.T.); +#17598 = VERTEX_POINT('',#17599); +#17599 = CARTESIAN_POINT('',(-2.45,1.,3.65)); +#17600 = CIRCLE('',#17601,0.5); +#17601 = AXIS2_PLACEMENT_3D('',#17602,#17603,#17604); +#17602 = CARTESIAN_POINT('',(-2.45,1.,4.15)); +#17603 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17604 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17605 = ORIENTED_EDGE('',*,*,#17606,.T.); +#17606 = EDGE_CURVE('',#17598,#17511,#17607,.T.); +#17607 = LINE('',#17608,#17609); +#17608 = CARTESIAN_POINT('',(-2.45,1.675,3.65)); +#17609 = VECTOR('',#17610,1.); +#17610 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17611 = ORIENTED_EDGE('',*,*,#17518,.T.); +#17612 = ORIENTED_EDGE('',*,*,#17438,.T.); +#17613 = ORIENTED_EDGE('',*,*,#17614,.F.); +#17614 = EDGE_CURVE('',#17566,#17439,#17615,.T.); +#17615 = LINE('',#17616,#17617); +#17616 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#17617 = VECTOR('',#17618,1.); +#17618 = DIRECTION('',(0.,0.,1.)); +#17619 = PLANE('',#17620); +#17620 = AXIS2_PLACEMENT_3D('',#17621,#17622,#17623); +#17621 = CARTESIAN_POINT('',(-2.45,2.35,0.)); +#17622 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17623 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17624 = ADVANCED_FACE('',(#17625),#17643,.F.); +#17625 = FACE_BOUND('',#17626,.T.); +#17626 = EDGE_LOOP('',(#17627,#17628,#17629,#17637)); +#17627 = ORIENTED_EDGE('',*,*,#17541,.F.); +#17628 = ORIENTED_EDGE('',*,*,#17478,.T.); +#17629 = ORIENTED_EDGE('',*,*,#17630,.T.); +#17630 = EDGE_CURVE('',#17471,#17631,#17633,.T.); +#17631 = VERTEX_POINT('',#17632); +#17632 = CARTESIAN_POINT('',(6.6,-2.65,6.8)); +#17633 = LINE('',#17634,#17635); +#17634 = CARTESIAN_POINT('',(5.3,-1.35,5.5)); +#17635 = VECTOR('',#17636,1.); +#17636 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#17637 = ORIENTED_EDGE('',*,*,#17638,.F.); +#17638 = EDGE_CURVE('',#17542,#17631,#17639,.T.); +#17639 = LINE('',#17640,#17641); +#17640 = CARTESIAN_POINT('',(-1.6,-2.65,6.8)); +#17641 = VECTOR('',#17642,1.); +#17642 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17643 = PLANE('',#17644); +#17644 = AXIS2_PLACEMENT_3D('',#17645,#17646,#17647); +#17645 = CARTESIAN_POINT('',(-1.6,-2.75,6.9)); +#17646 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#17647 = DIRECTION('',(-1.,1.224646799147E-16,-2.105272540809E-29)); +#17648 = ADVANCED_FACE('',(#17649),#17763,.F.); +#17649 = FACE_BOUND('',#17650,.F.); +#17650 = EDGE_LOOP('',(#17651,#17659,#17660,#17661,#17669,#17677,#17685, + #17693,#17701,#17709,#17717,#17725,#17733,#17741,#17749,#17757)); +#17651 = ORIENTED_EDGE('',*,*,#17652,.F.); +#17652 = EDGE_CURVE('',#17566,#17653,#17655,.T.); +#17653 = VERTEX_POINT('',#17654); +#17654 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#17655 = LINE('',#17656,#17657); +#17656 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#17657 = VECTOR('',#17658,1.); +#17658 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17659 = ORIENTED_EDGE('',*,*,#17614,.T.); +#17660 = ORIENTED_EDGE('',*,*,#17446,.T.); +#17661 = ORIENTED_EDGE('',*,*,#17662,.F.); +#17662 = EDGE_CURVE('',#17663,#17447,#17665,.T.); +#17663 = VERTEX_POINT('',#17664); +#17664 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#17665 = LINE('',#17666,#17667); +#17666 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#17667 = VECTOR('',#17668,1.); +#17668 = DIRECTION('',(0.,0.,1.)); +#17669 = ORIENTED_EDGE('',*,*,#17670,.F.); +#17670 = EDGE_CURVE('',#17671,#17663,#17673,.T.); +#17671 = VERTEX_POINT('',#17672); +#17672 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#17673 = LINE('',#17674,#17675); +#17674 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#17675 = VECTOR('',#17676,1.); +#17676 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17677 = ORIENTED_EDGE('',*,*,#17678,.F.); +#17678 = EDGE_CURVE('',#17679,#17671,#17681,.T.); +#17679 = VERTEX_POINT('',#17680); +#17680 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#17681 = LINE('',#17682,#17683); +#17682 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#17683 = VECTOR('',#17684,1.); +#17684 = DIRECTION('',(-0.,0.,-1.)); +#17685 = ORIENTED_EDGE('',*,*,#17686,.T.); +#17686 = EDGE_CURVE('',#17679,#17687,#17689,.T.); +#17687 = VERTEX_POINT('',#17688); +#17688 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#17689 = LINE('',#17690,#17691); +#17690 = CARTESIAN_POINT('',(5.75,-3.4,1.)); +#17691 = VECTOR('',#17692,1.); +#17692 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17693 = ORIENTED_EDGE('',*,*,#17694,.T.); +#17694 = EDGE_CURVE('',#17687,#17695,#17697,.T.); +#17695 = VERTEX_POINT('',#17696); +#17696 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#17697 = LINE('',#17698,#17699); +#17698 = CARTESIAN_POINT('',(4.25,-3.4,1.)); +#17699 = VECTOR('',#17700,1.); +#17700 = DIRECTION('',(-0.,0.,-1.)); +#17701 = ORIENTED_EDGE('',*,*,#17702,.F.); +#17702 = EDGE_CURVE('',#17703,#17695,#17705,.T.); +#17703 = VERTEX_POINT('',#17704); +#17704 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#17705 = LINE('',#17706,#17707); +#17706 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#17707 = VECTOR('',#17708,1.); +#17708 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17709 = ORIENTED_EDGE('',*,*,#17710,.F.); +#17710 = EDGE_CURVE('',#17711,#17703,#17713,.T.); +#17711 = VERTEX_POINT('',#17712); +#17712 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#17713 = LINE('',#17714,#17715); +#17714 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#17715 = VECTOR('',#17716,1.); +#17716 = DIRECTION('',(-0.,0.,-1.)); +#17717 = ORIENTED_EDGE('',*,*,#17718,.T.); +#17718 = EDGE_CURVE('',#17711,#17719,#17721,.T.); +#17719 = VERTEX_POINT('',#17720); +#17720 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#17721 = LINE('',#17722,#17723); +#17722 = CARTESIAN_POINT('',(3.25,-3.4,1.)); +#17723 = VECTOR('',#17724,1.); +#17724 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17725 = ORIENTED_EDGE('',*,*,#17726,.T.); +#17726 = EDGE_CURVE('',#17719,#17727,#17729,.T.); +#17727 = VERTEX_POINT('',#17728); +#17728 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#17729 = LINE('',#17730,#17731); +#17730 = CARTESIAN_POINT('',(1.75,-3.4,1.)); +#17731 = VECTOR('',#17732,1.); +#17732 = DIRECTION('',(-0.,0.,-1.)); +#17733 = ORIENTED_EDGE('',*,*,#17734,.F.); +#17734 = EDGE_CURVE('',#17735,#17727,#17737,.T.); +#17735 = VERTEX_POINT('',#17736); +#17736 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#17737 = LINE('',#17738,#17739); +#17738 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#17739 = VECTOR('',#17740,1.); +#17740 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17741 = ORIENTED_EDGE('',*,*,#17742,.F.); +#17742 = EDGE_CURVE('',#17743,#17735,#17745,.T.); +#17743 = VERTEX_POINT('',#17744); +#17744 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#17745 = LINE('',#17746,#17747); +#17746 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#17747 = VECTOR('',#17748,1.); +#17748 = DIRECTION('',(-0.,0.,-1.)); +#17749 = ORIENTED_EDGE('',*,*,#17750,.T.); +#17750 = EDGE_CURVE('',#17743,#17751,#17753,.T.); +#17751 = VERTEX_POINT('',#17752); +#17752 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#17753 = LINE('',#17754,#17755); +#17754 = CARTESIAN_POINT('',(0.75,-3.4,1.)); +#17755 = VECTOR('',#17756,1.); +#17756 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17757 = ORIENTED_EDGE('',*,*,#17758,.T.); +#17758 = EDGE_CURVE('',#17751,#17653,#17759,.T.); +#17759 = LINE('',#17760,#17761); +#17760 = CARTESIAN_POINT('',(-0.75,-3.4,1.)); +#17761 = VECTOR('',#17762,1.); +#17762 = DIRECTION('',(-0.,0.,-1.)); +#17763 = PLANE('',#17764); +#17764 = AXIS2_PLACEMENT_3D('',#17765,#17766,#17767); +#17765 = CARTESIAN_POINT('',(-2.45,-3.4,0.)); +#17766 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17767 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17768 = ADVANCED_FACE('',(#17769),#17787,.F.); +#17769 = FACE_BOUND('',#17770,.T.); +#17770 = EDGE_LOOP('',(#17771,#17772,#17773,#17781)); +#17771 = ORIENTED_EDGE('',*,*,#17630,.F.); +#17772 = ORIENTED_EDGE('',*,*,#17470,.T.); +#17773 = ORIENTED_EDGE('',*,*,#17774,.T.); +#17774 = EDGE_CURVE('',#17463,#17775,#17777,.T.); +#17775 = VERTEX_POINT('',#17776); +#17776 = CARTESIAN_POINT('',(6.6,0.5,6.8)); +#17777 = LINE('',#17778,#17779); +#17778 = CARTESIAN_POINT('',(6.075,0.5,6.275)); +#17779 = VECTOR('',#17780,1.); +#17780 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#17781 = ORIENTED_EDGE('',*,*,#17782,.F.); +#17782 = EDGE_CURVE('',#17631,#17775,#17783,.T.); +#17783 = LINE('',#17784,#17785); +#17784 = CARTESIAN_POINT('',(6.6,-2.65,6.8)); +#17785 = VECTOR('',#17786,1.); +#17786 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17787 = PLANE('',#17788); +#17788 = AXIS2_PLACEMENT_3D('',#17789,#17790,#17791); +#17789 = CARTESIAN_POINT('',(6.7,-2.65,6.9)); +#17790 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#17791 = DIRECTION('',(-1.224646799147E-16,-1.,-2.105272540809E-29)); +#17792 = ADVANCED_FACE('',(#17793),#17852,.F.); +#17793 = FACE_BOUND('',#17794,.F.); +#17794 = EDGE_LOOP('',(#17795,#17803,#17804,#17805,#17813,#17821,#17830, + #17838,#17846)); +#17795 = ORIENTED_EDGE('',*,*,#17796,.F.); +#17796 = EDGE_CURVE('',#17663,#17797,#17799,.T.); +#17797 = VERTEX_POINT('',#17798); +#17798 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#17799 = LINE('',#17800,#17801); +#17800 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#17801 = VECTOR('',#17802,1.); +#17802 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17803 = ORIENTED_EDGE('',*,*,#17662,.T.); +#17804 = ORIENTED_EDGE('',*,*,#17454,.T.); +#17805 = ORIENTED_EDGE('',*,*,#17806,.F.); +#17806 = EDGE_CURVE('',#17807,#17455,#17809,.T.); +#17807 = VERTEX_POINT('',#17808); +#17808 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#17809 = LINE('',#17810,#17811); +#17810 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#17811 = VECTOR('',#17812,1.); +#17812 = DIRECTION('',(0.,0.,1.)); +#17813 = ORIENTED_EDGE('',*,*,#17814,.F.); +#17814 = EDGE_CURVE('',#17815,#17807,#17817,.T.); +#17815 = VERTEX_POINT('',#17816); +#17816 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#17817 = LINE('',#17818,#17819); +#17818 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#17819 = VECTOR('',#17820,1.); +#17820 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17821 = ORIENTED_EDGE('',*,*,#17822,.F.); +#17822 = EDGE_CURVE('',#17823,#17815,#17825,.T.); +#17823 = VERTEX_POINT('',#17824); +#17824 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#17825 = CIRCLE('',#17826,0.5); +#17826 = AXIS2_PLACEMENT_3D('',#17827,#17828,#17829); +#17827 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#17828 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17829 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17830 = ORIENTED_EDGE('',*,*,#17831,.F.); +#17831 = EDGE_CURVE('',#17832,#17823,#17834,.T.); +#17832 = VERTEX_POINT('',#17833); +#17833 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#17834 = LINE('',#17835,#17836); +#17835 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#17836 = VECTOR('',#17837,1.); +#17837 = DIRECTION('',(-0.,0.,-1.)); +#17838 = ORIENTED_EDGE('',*,*,#17839,.T.); +#17839 = EDGE_CURVE('',#17832,#17840,#17842,.T.); +#17840 = VERTEX_POINT('',#17841); +#17841 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#17842 = LINE('',#17843,#17844); +#17843 = CARTESIAN_POINT('',(7.45,-3.4,7.)); +#17844 = VECTOR('',#17845,1.); +#17845 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17846 = ORIENTED_EDGE('',*,*,#17847,.F.); +#17847 = EDGE_CURVE('',#17797,#17840,#17848,.T.); +#17848 = LINE('',#17849,#17850); +#17849 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#17850 = VECTOR('',#17851,1.); +#17851 = DIRECTION('',(0.,0.,1.)); +#17852 = PLANE('',#17853); +#17853 = AXIS2_PLACEMENT_3D('',#17854,#17855,#17856); +#17854 = CARTESIAN_POINT('',(7.45,-3.4,0.)); +#17855 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17856 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17857 = ADVANCED_FACE('',(#17858),#17877,.T.); +#17858 = FACE_BOUND('',#17859,.T.); +#17859 = EDGE_LOOP('',(#17860,#17861,#17862,#17870,#17876)); +#17860 = ORIENTED_EDGE('',*,*,#17462,.F.); +#17861 = ORIENTED_EDGE('',*,*,#17806,.F.); +#17862 = ORIENTED_EDGE('',*,*,#17863,.T.); +#17863 = EDGE_CURVE('',#17807,#17864,#17866,.T.); +#17864 = VERTEX_POINT('',#17865); +#17865 = CARTESIAN_POINT('',(6.6,0.5,3.65)); +#17866 = LINE('',#17867,#17868); +#17867 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#17868 = VECTOR('',#17869,1.); +#17869 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17870 = ORIENTED_EDGE('',*,*,#17871,.T.); +#17871 = EDGE_CURVE('',#17864,#17775,#17872,.T.); +#17872 = LINE('',#17873,#17874); +#17873 = CARTESIAN_POINT('',(6.6,0.5,5.325)); +#17874 = VECTOR('',#17875,1.); +#17875 = DIRECTION('',(0.,0.,1.)); +#17876 = ORIENTED_EDGE('',*,*,#17774,.F.); +#17877 = PLANE('',#17878); +#17878 = AXIS2_PLACEMENT_3D('',#17879,#17880,#17881); +#17879 = CARTESIAN_POINT('',(7.45,0.5,3.65)); +#17880 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17881 = DIRECTION('',(0.,-0.,1.)); +#17882 = ADVANCED_FACE('',(#17883),#17926,.F.); +#17883 = FACE_BOUND('',#17884,.F.); +#17884 = EDGE_LOOP('',(#17885,#17886,#17894,#17903,#17911,#17919,#17925) + ); +#17885 = ORIENTED_EDGE('',*,*,#17500,.T.); +#17886 = ORIENTED_EDGE('',*,*,#17887,.T.); +#17887 = EDGE_CURVE('',#17503,#17888,#17890,.T.); +#17888 = VERTEX_POINT('',#17889); +#17889 = CARTESIAN_POINT('',(-1.6,1.,3.65)); +#17890 = LINE('',#17891,#17892); +#17891 = CARTESIAN_POINT('',(-1.6,1.25,3.65)); +#17892 = VECTOR('',#17893,1.); +#17893 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17894 = ORIENTED_EDGE('',*,*,#17895,.T.); +#17895 = EDGE_CURVE('',#17888,#17896,#17898,.T.); +#17896 = VERTEX_POINT('',#17897); +#17897 = CARTESIAN_POINT('',(-1.6,1.5,4.15)); +#17898 = CIRCLE('',#17899,0.5); +#17899 = AXIS2_PLACEMENT_3D('',#17900,#17901,#17902); +#17900 = CARTESIAN_POINT('',(-1.6,1.,4.15)); +#17901 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#17902 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17903 = ORIENTED_EDGE('',*,*,#17904,.T.); +#17904 = EDGE_CURVE('',#17896,#17905,#17907,.T.); +#17905 = VERTEX_POINT('',#17906); +#17906 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#17907 = LINE('',#17908,#17909); +#17908 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#17909 = VECTOR('',#17910,1.); +#17910 = DIRECTION('',(0.,0.,-1.)); +#17911 = ORIENTED_EDGE('',*,*,#17912,.T.); +#17912 = EDGE_CURVE('',#17905,#17913,#17915,.T.); +#17913 = VERTEX_POINT('',#17914); +#17914 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#17915 = LINE('',#17916,#17917); +#17916 = CARTESIAN_POINT('',(-1.6,1.5,1.85)); +#17917 = VECTOR('',#17918,1.); +#17918 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17919 = ORIENTED_EDGE('',*,*,#17920,.F.); +#17920 = EDGE_CURVE('',#17542,#17913,#17921,.T.); +#17921 = LINE('',#17922,#17923); +#17922 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#17923 = VECTOR('',#17924,1.); +#17924 = DIRECTION('',(0.,0.,-1.)); +#17925 = ORIENTED_EDGE('',*,*,#17549,.F.); +#17926 = PLANE('',#17927); +#17927 = AXIS2_PLACEMENT_3D('',#17928,#17929,#17930); +#17928 = CARTESIAN_POINT('',(-1.6,1.5,7.)); +#17929 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17930 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17931 = ADVANCED_FACE('',(#17932),#17943,.T.); +#17932 = FACE_BOUND('',#17933,.T.); +#17933 = EDGE_LOOP('',(#17934,#17935,#17941,#17942)); +#17934 = ORIENTED_EDGE('',*,*,#17887,.T.); +#17935 = ORIENTED_EDGE('',*,*,#17936,.T.); +#17936 = EDGE_CURVE('',#17888,#17598,#17937,.T.); +#17937 = LINE('',#17938,#17939); +#17938 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#17939 = VECTOR('',#17940,1.); +#17940 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17941 = ORIENTED_EDGE('',*,*,#17606,.T.); +#17942 = ORIENTED_EDGE('',*,*,#17510,.F.); +#17943 = PLANE('',#17944); +#17944 = AXIS2_PLACEMENT_3D('',#17945,#17946,#17947); +#17945 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#17946 = DIRECTION('',(0.,0.,1.)); +#17947 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#17948 = ADVANCED_FACE('',(#17949),#17967,.F.); +#17949 = FACE_BOUND('',#17950,.F.); +#17950 = EDGE_LOOP('',(#17951,#17952,#17953,#17961)); +#17951 = ORIENTED_EDGE('',*,*,#17563,.T.); +#17952 = ORIENTED_EDGE('',*,*,#17652,.T.); +#17953 = ORIENTED_EDGE('',*,*,#17954,.T.); +#17954 = EDGE_CURVE('',#17653,#17955,#17957,.T.); +#17955 = VERTEX_POINT('',#17956); +#17956 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#17957 = LINE('',#17958,#17959); +#17958 = CARTESIAN_POINT('',(-0.75,-3.4,0.)); +#17959 = VECTOR('',#17960,1.); +#17960 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17961 = ORIENTED_EDGE('',*,*,#17962,.T.); +#17962 = EDGE_CURVE('',#17955,#17564,#17963,.T.); +#17963 = LINE('',#17964,#17965); +#17964 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#17965 = VECTOR('',#17966,1.); +#17966 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17967 = PLANE('',#17968); +#17968 = AXIS2_PLACEMENT_3D('',#17969,#17970,#17971); +#17969 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#17970 = DIRECTION('',(0.,0.,1.)); +#17971 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17972 = ADVANCED_FACE('',(#17973),#17984,.F.); +#17973 = FACE_BOUND('',#17974,.F.); +#17974 = EDGE_LOOP('',(#17975,#17976,#17977,#17983)); +#17975 = ORIENTED_EDGE('',*,*,#17936,.T.); +#17976 = ORIENTED_EDGE('',*,*,#17597,.T.); +#17977 = ORIENTED_EDGE('',*,*,#17978,.F.); +#17978 = EDGE_CURVE('',#17896,#17590,#17979,.T.); +#17979 = LINE('',#17980,#17981); +#17980 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#17981 = VECTOR('',#17982,1.); +#17982 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#17983 = ORIENTED_EDGE('',*,*,#17895,.F.); +#17984 = CYLINDRICAL_SURFACE('',#17985,0.5); +#17985 = AXIS2_PLACEMENT_3D('',#17986,#17987,#17988); +#17986 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#17987 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#17988 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#17989 = ADVANCED_FACE('',(#17990),#18154,.T.); +#17990 = FACE_BOUND('',#17991,.T.); +#17991 = EDGE_LOOP('',(#17992,#17993,#18001,#18009,#18017,#18025,#18033, + #18042,#18050,#18058,#18066,#18074,#18082,#18091,#18099,#18107, + #18115,#18123,#18129,#18130,#18131,#18132,#18140,#18148)); +#17992 = ORIENTED_EDGE('',*,*,#17831,.F.); +#17993 = ORIENTED_EDGE('',*,*,#17994,.T.); +#17994 = EDGE_CURVE('',#17832,#17995,#17997,.T.); +#17995 = VERTEX_POINT('',#17996); +#17996 = CARTESIAN_POINT('',(5.5,1.5,7.)); +#17997 = LINE('',#17998,#17999); +#17998 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#17999 = VECTOR('',#18000,1.); +#18000 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18001 = ORIENTED_EDGE('',*,*,#18002,.T.); +#18002 = EDGE_CURVE('',#17995,#18003,#18005,.T.); +#18003 = VERTEX_POINT('',#18004); +#18004 = CARTESIAN_POINT('',(5.5,1.5,6.1)); +#18005 = LINE('',#18006,#18007); +#18006 = CARTESIAN_POINT('',(5.5,1.5,5.327450166113)); +#18007 = VECTOR('',#18008,1.); +#18008 = DIRECTION('',(-4.93432455389E-16,8.449221308824E-17,-1.)); +#18009 = ORIENTED_EDGE('',*,*,#18010,.T.); +#18010 = EDGE_CURVE('',#18003,#18011,#18013,.T.); +#18011 = VERTEX_POINT('',#18012); +#18012 = CARTESIAN_POINT('',(5.25,1.5,5.85)); +#18013 = LINE('',#18014,#18015); +#18014 = CARTESIAN_POINT('',(4.238725083056,1.5,4.838725083056)); +#18015 = VECTOR('',#18016,1.); +#18016 = DIRECTION('',(-0.707106781187,1.463406224556E-16, + -0.707106781187)); +#18017 = ORIENTED_EDGE('',*,*,#18018,.T.); +#18018 = EDGE_CURVE('',#18011,#18019,#18021,.T.); +#18019 = VERTEX_POINT('',#18020); +#18020 = CARTESIAN_POINT('',(5.5,1.5,5.6)); +#18021 = LINE('',#18022,#18023); +#18022 = CARTESIAN_POINT('',(5.011274916944,1.5,6.088725083056)); +#18023 = VECTOR('',#18024,1.); +#18024 = DIRECTION('',(0.707106781187,-2.685058879138E-17, + -0.707106781187)); +#18025 = ORIENTED_EDGE('',*,*,#18026,.T.); +#18026 = EDGE_CURVE('',#18019,#18027,#18029,.T.); +#18027 = VERTEX_POINT('',#18028); +#18028 = CARTESIAN_POINT('',(5.5,1.5,3.85)); +#18029 = LINE('',#18030,#18031); +#18030 = CARTESIAN_POINT('',(5.5,1.5,3.827450166113)); +#18031 = VECTOR('',#18032,1.); +#18032 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#18033 = ORIENTED_EDGE('',*,*,#18034,.F.); +#18034 = EDGE_CURVE('',#18035,#18027,#18037,.T.); +#18035 = VERTEX_POINT('',#18036); +#18036 = CARTESIAN_POINT('',(4.75,1.5,3.1)); +#18037 = CIRCLE('',#18038,0.75); +#18038 = AXIS2_PLACEMENT_3D('',#18039,#18040,#18041); +#18039 = CARTESIAN_POINT('',(4.75,1.5,3.85)); +#18040 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18041 = DIRECTION('',(-0.,0.,-1.)); +#18042 = ORIENTED_EDGE('',*,*,#18043,.T.); +#18043 = EDGE_CURVE('',#18035,#18044,#18046,.T.); +#18044 = VERTEX_POINT('',#18045); +#18045 = CARTESIAN_POINT('',(4.,1.5,3.1)); +#18046 = LINE('',#18047,#18048); +#18047 = CARTESIAN_POINT('',(3.25,1.5,3.1)); +#18048 = VECTOR('',#18049,1.); +#18049 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18050 = ORIENTED_EDGE('',*,*,#18051,.T.); +#18051 = EDGE_CURVE('',#18044,#18052,#18054,.T.); +#18052 = VERTEX_POINT('',#18053); +#18053 = CARTESIAN_POINT('',(4.,1.5,7.)); +#18054 = LINE('',#18055,#18056); +#18055 = CARTESIAN_POINT('',(4.,1.5,5.777450166113)); +#18056 = VECTOR('',#18057,1.); +#18057 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#18058 = ORIENTED_EDGE('',*,*,#18059,.T.); +#18059 = EDGE_CURVE('',#18052,#18060,#18062,.T.); +#18060 = VERTEX_POINT('',#18061); +#18061 = CARTESIAN_POINT('',(1.,1.5,7.)); +#18062 = LINE('',#18063,#18064); +#18063 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#18064 = VECTOR('',#18065,1.); +#18065 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18066 = ORIENTED_EDGE('',*,*,#18067,.F.); +#18067 = EDGE_CURVE('',#18068,#18060,#18070,.T.); +#18068 = VERTEX_POINT('',#18069); +#18069 = CARTESIAN_POINT('',(1.,1.5,3.1)); +#18070 = LINE('',#18071,#18072); +#18071 = CARTESIAN_POINT('',(1.,1.5,5.777450166113)); +#18072 = VECTOR('',#18073,1.); +#18073 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#18074 = ORIENTED_EDGE('',*,*,#18075,.F.); +#18075 = EDGE_CURVE('',#18076,#18068,#18078,.T.); +#18076 = VERTEX_POINT('',#18077); +#18077 = CARTESIAN_POINT('',(0.25,1.5,3.1)); +#18078 = LINE('',#18079,#18080); +#18079 = CARTESIAN_POINT('',(1.75,1.5,3.1)); +#18080 = VECTOR('',#18081,1.); +#18081 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#18082 = ORIENTED_EDGE('',*,*,#18083,.F.); +#18083 = EDGE_CURVE('',#18084,#18076,#18086,.T.); +#18084 = VERTEX_POINT('',#18085); +#18085 = CARTESIAN_POINT('',(-0.5,1.5,3.85)); +#18086 = CIRCLE('',#18087,0.75); +#18087 = AXIS2_PLACEMENT_3D('',#18088,#18089,#18090); +#18088 = CARTESIAN_POINT('',(0.25,1.5,3.85)); +#18089 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18090 = DIRECTION('',(-0.,0.,-1.)); +#18091 = ORIENTED_EDGE('',*,*,#18092,.F.); +#18092 = EDGE_CURVE('',#18093,#18084,#18095,.T.); +#18093 = VERTEX_POINT('',#18094); +#18094 = CARTESIAN_POINT('',(-0.5,1.5,5.6)); +#18095 = LINE('',#18096,#18097); +#18096 = CARTESIAN_POINT('',(-0.5,1.5,3.827450166113)); +#18097 = VECTOR('',#18098,1.); +#18098 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#18099 = ORIENTED_EDGE('',*,*,#18100,.F.); +#18100 = EDGE_CURVE('',#18101,#18093,#18103,.T.); +#18101 = VERTEX_POINT('',#18102); +#18102 = CARTESIAN_POINT('',(-0.25,1.5,5.85)); +#18103 = LINE('',#18104,#18105); +#18104 = CARTESIAN_POINT('',(-1.127491694352E-02,1.5,6.088725083056)); +#18105 = VECTOR('',#18106,1.); +#18106 = DIRECTION('',(-0.707106781187,1.463406224556E-16, + -0.707106781187)); +#18107 = ORIENTED_EDGE('',*,*,#18108,.F.); +#18108 = EDGE_CURVE('',#18109,#18101,#18111,.T.); +#18109 = VERTEX_POINT('',#18110); +#18110 = CARTESIAN_POINT('',(-0.5,1.5,6.1)); +#18111 = LINE('',#18112,#18113); +#18112 = CARTESIAN_POINT('',(0.761274916944,1.5,4.838725083056)); +#18113 = VECTOR('',#18114,1.); +#18114 = DIRECTION('',(0.707106781187,-2.685058879138E-17, + -0.707106781187)); +#18115 = ORIENTED_EDGE('',*,*,#18116,.F.); +#18116 = EDGE_CURVE('',#18117,#18109,#18119,.T.); +#18117 = VERTEX_POINT('',#18118); +#18118 = CARTESIAN_POINT('',(-0.5,1.5,7.)); +#18119 = LINE('',#18120,#18121); +#18120 = CARTESIAN_POINT('',(-0.5,1.5,5.327450166113)); +#18121 = VECTOR('',#18122,1.); +#18122 = DIRECTION('',(1.034731183114E-32,8.449221308824E-17,-1.)); +#18123 = ORIENTED_EDGE('',*,*,#18124,.T.); +#18124 = EDGE_CURVE('',#18117,#17582,#18125,.T.); +#18125 = LINE('',#18126,#18127); +#18126 = CARTESIAN_POINT('',(7.45,1.5,7.)); +#18127 = VECTOR('',#18128,1.); +#18128 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18129 = ORIENTED_EDGE('',*,*,#17589,.T.); +#18130 = ORIENTED_EDGE('',*,*,#17978,.F.); +#18131 = ORIENTED_EDGE('',*,*,#17904,.T.); +#18132 = ORIENTED_EDGE('',*,*,#18133,.F.); +#18133 = EDGE_CURVE('',#18134,#17905,#18136,.T.); +#18134 = VERTEX_POINT('',#18135); +#18135 = CARTESIAN_POINT('',(6.6,1.5,1.85)); +#18136 = LINE('',#18137,#18138); +#18137 = CARTESIAN_POINT('',(6.6,1.5,1.85)); +#18138 = VECTOR('',#18139,1.); +#18139 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18140 = ORIENTED_EDGE('',*,*,#18141,.F.); +#18141 = EDGE_CURVE('',#18142,#18134,#18144,.T.); +#18142 = VERTEX_POINT('',#18143); +#18143 = CARTESIAN_POINT('',(6.6,1.5,4.15)); +#18144 = LINE('',#18145,#18146); +#18145 = CARTESIAN_POINT('',(6.6,1.5,7.)); +#18146 = VECTOR('',#18147,1.); +#18147 = DIRECTION('',(0.,0.,-1.)); +#18148 = ORIENTED_EDGE('',*,*,#18149,.F.); +#18149 = EDGE_CURVE('',#17823,#18142,#18150,.T.); +#18150 = LINE('',#18151,#18152); +#18151 = CARTESIAN_POINT('',(7.45,1.5,4.15)); +#18152 = VECTOR('',#18153,1.); +#18153 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18154 = PLANE('',#18155); +#18155 = AXIS2_PLACEMENT_3D('',#18156,#18157,#18158); +#18156 = CARTESIAN_POINT('',(2.5,1.5,4.554900332226)); +#18157 = DIRECTION('',(-1.224646799147E-16,-1.,-8.449221308824E-17)); +#18158 = DIRECTION('',(-1.034731183114E-32,-8.449221308824E-17,1.)); +#18159 = ADVANCED_FACE('',(#18160),#18178,.T.); +#18160 = FACE_BOUND('',#18161,.T.); +#18161 = EDGE_LOOP('',(#18162,#18163,#18171,#18177)); +#18162 = ORIENTED_EDGE('',*,*,#18124,.F.); +#18163 = ORIENTED_EDGE('',*,*,#18164,.F.); +#18164 = EDGE_CURVE('',#18165,#18117,#18167,.T.); +#18165 = VERTEX_POINT('',#18166); +#18166 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#18167 = LINE('',#18168,#18169); +#18168 = CARTESIAN_POINT('',(-0.5,2.35,7.)); +#18169 = VECTOR('',#18170,1.); +#18170 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18171 = ORIENTED_EDGE('',*,*,#18172,.T.); +#18172 = EDGE_CURVE('',#18165,#17574,#18173,.T.); +#18173 = LINE('',#18174,#18175); +#18174 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#18175 = VECTOR('',#18176,1.); +#18176 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18177 = ORIENTED_EDGE('',*,*,#17581,.T.); +#18178 = PLANE('',#18179); +#18179 = AXIS2_PLACEMENT_3D('',#18180,#18181,#18182); +#18180 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#18181 = DIRECTION('',(0.,0.,1.)); +#18182 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18183 = ADVANCED_FACE('',(#18184),#18412,.F.); +#18184 = FACE_BOUND('',#18185,.F.); +#18185 = EDGE_LOOP('',(#18186,#18194,#18195,#18203,#18211,#18219,#18227, + #18235,#18244,#18252,#18260,#18268,#18276,#18284,#18293,#18301, + #18309,#18317,#18323,#18324,#18325,#18326,#18334,#18342,#18350, + #18358,#18366,#18374,#18382,#18390,#18398,#18406)); +#18186 = ORIENTED_EDGE('',*,*,#18187,.F.); +#18187 = EDGE_CURVE('',#17797,#18188,#18190,.T.); +#18188 = VERTEX_POINT('',#18189); +#18189 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#18190 = LINE('',#18191,#18192); +#18191 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#18192 = VECTOR('',#18193,1.); +#18193 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18194 = ORIENTED_EDGE('',*,*,#17847,.T.); +#18195 = ORIENTED_EDGE('',*,*,#18196,.T.); +#18196 = EDGE_CURVE('',#17840,#18197,#18199,.T.); +#18197 = VERTEX_POINT('',#18198); +#18198 = CARTESIAN_POINT('',(5.5,2.35,7.)); +#18199 = LINE('',#18200,#18201); +#18200 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#18201 = VECTOR('',#18202,1.); +#18202 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18203 = ORIENTED_EDGE('',*,*,#18204,.F.); +#18204 = EDGE_CURVE('',#18205,#18197,#18207,.T.); +#18205 = VERTEX_POINT('',#18206); +#18206 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#18207 = LINE('',#18208,#18209); +#18208 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#18209 = VECTOR('',#18210,1.); +#18210 = DIRECTION('',(4.93432455389E-16,-6.042804770875E-32,1.)); +#18211 = ORIENTED_EDGE('',*,*,#18212,.F.); +#18212 = EDGE_CURVE('',#18213,#18205,#18215,.T.); +#18213 = VERTEX_POINT('',#18214); +#18214 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#18215 = LINE('',#18216,#18217); +#18216 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#18217 = VECTOR('',#18218,1.); +#18218 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#18219 = ORIENTED_EDGE('',*,*,#18220,.F.); +#18220 = EDGE_CURVE('',#18221,#18213,#18223,.T.); +#18221 = VERTEX_POINT('',#18222); +#18222 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#18223 = LINE('',#18224,#18225); +#18224 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#18225 = VECTOR('',#18226,1.); +#18226 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#18227 = ORIENTED_EDGE('',*,*,#18228,.F.); +#18228 = EDGE_CURVE('',#18229,#18221,#18231,.T.); +#18229 = VERTEX_POINT('',#18230); +#18230 = CARTESIAN_POINT('',(5.5,2.35,3.85)); +#18231 = LINE('',#18232,#18233); +#18232 = CARTESIAN_POINT('',(5.5,2.35,3.1)); +#18233 = VECTOR('',#18234,1.); +#18234 = DIRECTION('',(0.,0.,1.)); +#18235 = ORIENTED_EDGE('',*,*,#18236,.F.); +#18236 = EDGE_CURVE('',#18237,#18229,#18239,.T.); +#18237 = VERTEX_POINT('',#18238); +#18238 = CARTESIAN_POINT('',(4.75,2.35,3.1)); +#18239 = CIRCLE('',#18240,0.75); +#18240 = AXIS2_PLACEMENT_3D('',#18241,#18242,#18243); +#18241 = CARTESIAN_POINT('',(4.75,2.35,3.85)); +#18242 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18243 = DIRECTION('',(0.,0.,1.)); +#18244 = ORIENTED_EDGE('',*,*,#18245,.F.); +#18245 = EDGE_CURVE('',#18246,#18237,#18248,.T.); +#18246 = VERTEX_POINT('',#18247); +#18247 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#18248 = LINE('',#18249,#18250); +#18249 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#18250 = VECTOR('',#18251,1.); +#18251 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#18252 = ORIENTED_EDGE('',*,*,#18253,.F.); +#18253 = EDGE_CURVE('',#18254,#18246,#18256,.T.); +#18254 = VERTEX_POINT('',#18255); +#18255 = CARTESIAN_POINT('',(4.,2.35,7.)); +#18256 = LINE('',#18257,#18258); +#18257 = CARTESIAN_POINT('',(4.,2.35,7.)); +#18258 = VECTOR('',#18259,1.); +#18259 = DIRECTION('',(-0.,0.,-1.)); +#18260 = ORIENTED_EDGE('',*,*,#18261,.T.); +#18261 = EDGE_CURVE('',#18254,#18262,#18264,.T.); +#18262 = VERTEX_POINT('',#18263); +#18263 = CARTESIAN_POINT('',(1.,2.35,7.)); +#18264 = LINE('',#18265,#18266); +#18265 = CARTESIAN_POINT('',(7.45,2.35,7.)); +#18266 = VECTOR('',#18267,1.); +#18267 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18268 = ORIENTED_EDGE('',*,*,#18269,.T.); +#18269 = EDGE_CURVE('',#18262,#18270,#18272,.T.); +#18270 = VERTEX_POINT('',#18271); +#18271 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#18272 = LINE('',#18273,#18274); +#18273 = CARTESIAN_POINT('',(1.,2.35,7.)); +#18274 = VECTOR('',#18275,1.); +#18275 = DIRECTION('',(-0.,0.,-1.)); +#18276 = ORIENTED_EDGE('',*,*,#18277,.T.); +#18277 = EDGE_CURVE('',#18270,#18278,#18280,.T.); +#18278 = VERTEX_POINT('',#18279); +#18279 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#18280 = LINE('',#18281,#18282); +#18281 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#18282 = VECTOR('',#18283,1.); +#18283 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18284 = ORIENTED_EDGE('',*,*,#18285,.T.); +#18285 = EDGE_CURVE('',#18278,#18286,#18288,.T.); +#18286 = VERTEX_POINT('',#18287); +#18287 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#18288 = CIRCLE('',#18289,0.75); +#18289 = AXIS2_PLACEMENT_3D('',#18290,#18291,#18292); +#18290 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#18291 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#18292 = DIRECTION('',(0.,0.,1.)); +#18293 = ORIENTED_EDGE('',*,*,#18294,.T.); +#18294 = EDGE_CURVE('',#18286,#18295,#18297,.T.); +#18295 = VERTEX_POINT('',#18296); +#18296 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#18297 = LINE('',#18298,#18299); +#18298 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#18299 = VECTOR('',#18300,1.); +#18300 = DIRECTION('',(0.,0.,1.)); +#18301 = ORIENTED_EDGE('',*,*,#18302,.T.); +#18302 = EDGE_CURVE('',#18295,#18303,#18305,.T.); +#18303 = VERTEX_POINT('',#18304); +#18304 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#18305 = LINE('',#18306,#18307); +#18306 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#18307 = VECTOR('',#18308,1.); +#18308 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#18309 = ORIENTED_EDGE('',*,*,#18310,.T.); +#18310 = EDGE_CURVE('',#18303,#18311,#18313,.T.); +#18311 = VERTEX_POINT('',#18312); +#18312 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#18313 = LINE('',#18314,#18315); +#18314 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#18315 = VECTOR('',#18316,1.); +#18316 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#18317 = ORIENTED_EDGE('',*,*,#18318,.T.); +#18318 = EDGE_CURVE('',#18311,#18165,#18319,.T.); +#18319 = LINE('',#18320,#18321); +#18320 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#18321 = VECTOR('',#18322,1.); +#18322 = DIRECTION('',(0.,0.,1.)); +#18323 = ORIENTED_EDGE('',*,*,#18172,.T.); +#18324 = ORIENTED_EDGE('',*,*,#17573,.F.); +#18325 = ORIENTED_EDGE('',*,*,#17962,.F.); +#18326 = ORIENTED_EDGE('',*,*,#18327,.T.); +#18327 = EDGE_CURVE('',#17955,#18328,#18330,.T.); +#18328 = VERTEX_POINT('',#18329); +#18329 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#18330 = LINE('',#18331,#18332); +#18331 = CARTESIAN_POINT('',(-0.75,2.35,0.)); +#18332 = VECTOR('',#18333,1.); +#18333 = DIRECTION('',(0.,0.,1.)); +#18334 = ORIENTED_EDGE('',*,*,#18335,.F.); +#18335 = EDGE_CURVE('',#18336,#18328,#18338,.T.); +#18336 = VERTEX_POINT('',#18337); +#18337 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#18338 = LINE('',#18339,#18340); +#18339 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#18340 = VECTOR('',#18341,1.); +#18341 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18342 = ORIENTED_EDGE('',*,*,#18343,.F.); +#18343 = EDGE_CURVE('',#18344,#18336,#18346,.T.); +#18344 = VERTEX_POINT('',#18345); +#18345 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#18346 = LINE('',#18347,#18348); +#18347 = CARTESIAN_POINT('',(0.75,2.35,0.)); +#18348 = VECTOR('',#18349,1.); +#18349 = DIRECTION('',(0.,0.,1.)); +#18350 = ORIENTED_EDGE('',*,*,#18351,.F.); +#18351 = EDGE_CURVE('',#18352,#18344,#18354,.T.); +#18352 = VERTEX_POINT('',#18353); +#18353 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#18354 = LINE('',#18355,#18356); +#18355 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#18356 = VECTOR('',#18357,1.); +#18357 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18358 = ORIENTED_EDGE('',*,*,#18359,.T.); +#18359 = EDGE_CURVE('',#18352,#18360,#18362,.T.); +#18360 = VERTEX_POINT('',#18361); +#18361 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#18362 = LINE('',#18363,#18364); +#18363 = CARTESIAN_POINT('',(1.75,2.35,0.)); +#18364 = VECTOR('',#18365,1.); +#18365 = DIRECTION('',(0.,0.,1.)); +#18366 = ORIENTED_EDGE('',*,*,#18367,.F.); +#18367 = EDGE_CURVE('',#18368,#18360,#18370,.T.); +#18368 = VERTEX_POINT('',#18369); +#18369 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#18370 = LINE('',#18371,#18372); +#18371 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#18372 = VECTOR('',#18373,1.); +#18373 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18374 = ORIENTED_EDGE('',*,*,#18375,.F.); +#18375 = EDGE_CURVE('',#18376,#18368,#18378,.T.); +#18376 = VERTEX_POINT('',#18377); +#18377 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#18378 = LINE('',#18379,#18380); +#18379 = CARTESIAN_POINT('',(3.25,2.35,0.)); +#18380 = VECTOR('',#18381,1.); +#18381 = DIRECTION('',(0.,0.,1.)); +#18382 = ORIENTED_EDGE('',*,*,#18383,.F.); +#18383 = EDGE_CURVE('',#18384,#18376,#18386,.T.); +#18384 = VERTEX_POINT('',#18385); +#18385 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#18386 = LINE('',#18387,#18388); +#18387 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#18388 = VECTOR('',#18389,1.); +#18389 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18390 = ORIENTED_EDGE('',*,*,#18391,.T.); +#18391 = EDGE_CURVE('',#18384,#18392,#18394,.T.); +#18392 = VERTEX_POINT('',#18393); +#18393 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#18394 = LINE('',#18395,#18396); +#18395 = CARTESIAN_POINT('',(4.25,2.35,0.)); +#18396 = VECTOR('',#18397,1.); +#18397 = DIRECTION('',(0.,0.,1.)); +#18398 = ORIENTED_EDGE('',*,*,#18399,.F.); +#18399 = EDGE_CURVE('',#18400,#18392,#18402,.T.); +#18400 = VERTEX_POINT('',#18401); +#18401 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#18402 = LINE('',#18403,#18404); +#18403 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#18404 = VECTOR('',#18405,1.); +#18405 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18406 = ORIENTED_EDGE('',*,*,#18407,.F.); +#18407 = EDGE_CURVE('',#18188,#18400,#18408,.T.); +#18408 = LINE('',#18409,#18410); +#18409 = CARTESIAN_POINT('',(5.75,2.35,0.)); +#18410 = VECTOR('',#18411,1.); +#18411 = DIRECTION('',(0.,0.,1.)); +#18412 = PLANE('',#18413); +#18413 = AXIS2_PLACEMENT_3D('',#18414,#18415,#18416); +#18414 = CARTESIAN_POINT('',(7.45,2.35,0.)); +#18415 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18416 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18417 = ADVANCED_FACE('',(#18418),#18436,.F.); +#18418 = FACE_BOUND('',#18419,.F.); +#18419 = EDGE_LOOP('',(#18420,#18421,#18429,#18435)); +#18420 = ORIENTED_EDGE('',*,*,#17920,.T.); +#18421 = ORIENTED_EDGE('',*,*,#18422,.T.); +#18422 = EDGE_CURVE('',#17913,#18423,#18425,.T.); +#18423 = VERTEX_POINT('',#18424); +#18424 = CARTESIAN_POINT('',(6.6,-2.65,1.85)); +#18425 = LINE('',#18426,#18427); +#18426 = CARTESIAN_POINT('',(-1.6,-2.65,1.85)); +#18427 = VECTOR('',#18428,1.); +#18428 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#18429 = ORIENTED_EDGE('',*,*,#18430,.F.); +#18430 = EDGE_CURVE('',#17631,#18423,#18431,.T.); +#18431 = LINE('',#18432,#18433); +#18432 = CARTESIAN_POINT('',(6.6,-2.65,7.)); +#18433 = VECTOR('',#18434,1.); +#18434 = DIRECTION('',(0.,0.,-1.)); +#18435 = ORIENTED_EDGE('',*,*,#17638,.F.); +#18436 = PLANE('',#18437); +#18437 = AXIS2_PLACEMENT_3D('',#18438,#18439,#18440); +#18438 = CARTESIAN_POINT('',(-1.6,-2.65,7.)); +#18439 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18440 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#18441 = ADVANCED_FACE('',(#18442),#18469,.T.); +#18442 = FACE_BOUND('',#18443,.T.); +#18443 = EDGE_LOOP('',(#18444,#18445,#18453,#18461,#18467,#18468)); +#18444 = ORIENTED_EDGE('',*,*,#18327,.T.); +#18445 = ORIENTED_EDGE('',*,*,#18446,.T.); +#18446 = EDGE_CURVE('',#18328,#18447,#18449,.T.); +#18447 = VERTEX_POINT('',#18448); +#18448 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#18449 = LINE('',#18450,#18451); +#18450 = CARTESIAN_POINT('',(-0.75,2.35,1.)); +#18451 = VECTOR('',#18452,1.); +#18452 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#18453 = ORIENTED_EDGE('',*,*,#18454,.T.); +#18454 = EDGE_CURVE('',#18447,#18455,#18457,.T.); +#18455 = VERTEX_POINT('',#18456); +#18456 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#18457 = LINE('',#18458,#18459); +#18458 = CARTESIAN_POINT('',(-0.75,0.5,0.3)); +#18459 = VECTOR('',#18460,1.); +#18460 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18461 = ORIENTED_EDGE('',*,*,#18462,.T.); +#18462 = EDGE_CURVE('',#18455,#17751,#18463,.T.); +#18463 = LINE('',#18464,#18465); +#18464 = CARTESIAN_POINT('',(-0.75,-0.5,0.3)); +#18465 = VECTOR('',#18466,1.); +#18466 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18467 = ORIENTED_EDGE('',*,*,#17758,.T.); +#18468 = ORIENTED_EDGE('',*,*,#17954,.T.); +#18469 = PLANE('',#18470); +#18470 = AXIS2_PLACEMENT_3D('',#18471,#18472,#18473); +#18471 = CARTESIAN_POINT('',(-0.75,-0.515451356496,0.330008245993)); +#18472 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#18473 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#18474 = ADVANCED_FACE('',(#18475),#18493,.F.); +#18475 = FACE_BOUND('',#18476,.F.); +#18476 = EDGE_LOOP('',(#18477,#18485,#18486,#18487)); +#18477 = ORIENTED_EDGE('',*,*,#18478,.T.); +#18478 = EDGE_CURVE('',#18479,#18455,#18481,.T.); +#18479 = VERTEX_POINT('',#18480); +#18480 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#18481 = LINE('',#18482,#18483); +#18482 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#18483 = VECTOR('',#18484,1.); +#18484 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18485 = ORIENTED_EDGE('',*,*,#18462,.T.); +#18486 = ORIENTED_EDGE('',*,*,#17750,.F.); +#18487 = ORIENTED_EDGE('',*,*,#18488,.F.); +#18488 = EDGE_CURVE('',#18479,#17743,#18489,.T.); +#18489 = LINE('',#18490,#18491); +#18490 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#18491 = VECTOR('',#18492,1.); +#18492 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18493 = PLANE('',#18494); +#18494 = AXIS2_PLACEMENT_3D('',#18495,#18496,#18497); +#18495 = CARTESIAN_POINT('',(0.75,-0.5,0.3)); +#18496 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#18497 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18498 = ADVANCED_FACE('',(#18499),#18524,.F.); +#18499 = FACE_BOUND('',#18500,.F.); +#18500 = EDGE_LOOP('',(#18501,#18502,#18510,#18516,#18517,#18518)); +#18501 = ORIENTED_EDGE('',*,*,#18343,.T.); +#18502 = ORIENTED_EDGE('',*,*,#18503,.T.); +#18503 = EDGE_CURVE('',#18336,#18504,#18506,.T.); +#18504 = VERTEX_POINT('',#18505); +#18505 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#18506 = LINE('',#18507,#18508); +#18507 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#18508 = VECTOR('',#18509,1.); +#18509 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#18510 = ORIENTED_EDGE('',*,*,#18511,.T.); +#18511 = EDGE_CURVE('',#18504,#18479,#18512,.T.); +#18512 = LINE('',#18513,#18514); +#18513 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#18514 = VECTOR('',#18515,1.); +#18515 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18516 = ORIENTED_EDGE('',*,*,#18488,.T.); +#18517 = ORIENTED_EDGE('',*,*,#17742,.T.); +#18518 = ORIENTED_EDGE('',*,*,#18519,.T.); +#18519 = EDGE_CURVE('',#17735,#18344,#18520,.T.); +#18520 = LINE('',#18521,#18522); +#18521 = CARTESIAN_POINT('',(0.75,-3.4,0.)); +#18522 = VECTOR('',#18523,1.); +#18523 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18524 = PLANE('',#18525); +#18525 = AXIS2_PLACEMENT_3D('',#18526,#18527,#18528); +#18526 = CARTESIAN_POINT('',(0.75,-0.515451356496,0.330008245993)); +#18527 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#18528 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#18529 = ADVANCED_FACE('',(#18530),#18541,.F.); +#18530 = FACE_BOUND('',#18531,.F.); +#18531 = EDGE_LOOP('',(#18532,#18533,#18534,#18540)); +#18532 = ORIENTED_EDGE('',*,*,#18519,.F.); +#18533 = ORIENTED_EDGE('',*,*,#17734,.T.); +#18534 = ORIENTED_EDGE('',*,*,#18535,.T.); +#18535 = EDGE_CURVE('',#17727,#18352,#18536,.T.); +#18536 = LINE('',#18537,#18538); +#18537 = CARTESIAN_POINT('',(1.75,-3.4,0.)); +#18538 = VECTOR('',#18539,1.); +#18539 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18540 = ORIENTED_EDGE('',*,*,#18351,.T.); +#18541 = PLANE('',#18542); +#18542 = AXIS2_PLACEMENT_3D('',#18543,#18544,#18545); +#18543 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#18544 = DIRECTION('',(0.,0.,1.)); +#18545 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18546 = ADVANCED_FACE('',(#18547),#18574,.T.); +#18547 = FACE_BOUND('',#18548,.T.); +#18548 = EDGE_LOOP('',(#18549,#18550,#18558,#18566,#18572,#18573)); +#18549 = ORIENTED_EDGE('',*,*,#18359,.T.); +#18550 = ORIENTED_EDGE('',*,*,#18551,.T.); +#18551 = EDGE_CURVE('',#18360,#18552,#18554,.T.); +#18552 = VERTEX_POINT('',#18553); +#18553 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#18554 = LINE('',#18555,#18556); +#18555 = CARTESIAN_POINT('',(1.75,2.35,1.)); +#18556 = VECTOR('',#18557,1.); +#18557 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#18558 = ORIENTED_EDGE('',*,*,#18559,.T.); +#18559 = EDGE_CURVE('',#18552,#18560,#18562,.T.); +#18560 = VERTEX_POINT('',#18561); +#18561 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#18562 = LINE('',#18563,#18564); +#18563 = CARTESIAN_POINT('',(1.75,0.5,0.3)); +#18564 = VECTOR('',#18565,1.); +#18565 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18566 = ORIENTED_EDGE('',*,*,#18567,.T.); +#18567 = EDGE_CURVE('',#18560,#17719,#18568,.T.); +#18568 = LINE('',#18569,#18570); +#18569 = CARTESIAN_POINT('',(1.75,-0.5,0.3)); +#18570 = VECTOR('',#18571,1.); +#18571 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18572 = ORIENTED_EDGE('',*,*,#17726,.T.); +#18573 = ORIENTED_EDGE('',*,*,#18535,.T.); +#18574 = PLANE('',#18575); +#18575 = AXIS2_PLACEMENT_3D('',#18576,#18577,#18578); +#18576 = CARTESIAN_POINT('',(1.75,-0.515451356496,0.330008245993)); +#18577 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#18578 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#18579 = ADVANCED_FACE('',(#18580),#18598,.F.); +#18580 = FACE_BOUND('',#18581,.F.); +#18581 = EDGE_LOOP('',(#18582,#18590,#18591,#18592)); +#18582 = ORIENTED_EDGE('',*,*,#18583,.T.); +#18583 = EDGE_CURVE('',#18584,#18560,#18586,.T.); +#18584 = VERTEX_POINT('',#18585); +#18585 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#18586 = LINE('',#18587,#18588); +#18587 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#18588 = VECTOR('',#18589,1.); +#18589 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18590 = ORIENTED_EDGE('',*,*,#18567,.T.); +#18591 = ORIENTED_EDGE('',*,*,#17718,.F.); +#18592 = ORIENTED_EDGE('',*,*,#18593,.F.); +#18593 = EDGE_CURVE('',#18584,#17711,#18594,.T.); +#18594 = LINE('',#18595,#18596); +#18595 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#18596 = VECTOR('',#18597,1.); +#18597 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18598 = PLANE('',#18599); +#18599 = AXIS2_PLACEMENT_3D('',#18600,#18601,#18602); +#18600 = CARTESIAN_POINT('',(3.25,-0.5,0.3)); +#18601 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#18602 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18603 = ADVANCED_FACE('',(#18604),#18629,.F.); +#18604 = FACE_BOUND('',#18605,.F.); +#18605 = EDGE_LOOP('',(#18606,#18607,#18615,#18621,#18622,#18623)); +#18606 = ORIENTED_EDGE('',*,*,#18375,.T.); +#18607 = ORIENTED_EDGE('',*,*,#18608,.T.); +#18608 = EDGE_CURVE('',#18368,#18609,#18611,.T.); +#18609 = VERTEX_POINT('',#18610); +#18610 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#18611 = LINE('',#18612,#18613); +#18612 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#18613 = VECTOR('',#18614,1.); +#18614 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#18615 = ORIENTED_EDGE('',*,*,#18616,.T.); +#18616 = EDGE_CURVE('',#18609,#18584,#18617,.T.); +#18617 = LINE('',#18618,#18619); +#18618 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#18619 = VECTOR('',#18620,1.); +#18620 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18621 = ORIENTED_EDGE('',*,*,#18593,.T.); +#18622 = ORIENTED_EDGE('',*,*,#17710,.T.); +#18623 = ORIENTED_EDGE('',*,*,#18624,.T.); +#18624 = EDGE_CURVE('',#17703,#18376,#18625,.T.); +#18625 = LINE('',#18626,#18627); +#18626 = CARTESIAN_POINT('',(3.25,-3.4,0.)); +#18627 = VECTOR('',#18628,1.); +#18628 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18629 = PLANE('',#18630); +#18630 = AXIS2_PLACEMENT_3D('',#18631,#18632,#18633); +#18631 = CARTESIAN_POINT('',(3.25,-0.515451356496,0.330008245993)); +#18632 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#18633 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#18634 = ADVANCED_FACE('',(#18635),#18646,.F.); +#18635 = FACE_BOUND('',#18636,.F.); +#18636 = EDGE_LOOP('',(#18637,#18638,#18644,#18645)); +#18637 = ORIENTED_EDGE('',*,*,#17702,.T.); +#18638 = ORIENTED_EDGE('',*,*,#18639,.T.); +#18639 = EDGE_CURVE('',#17695,#18384,#18640,.T.); +#18640 = LINE('',#18641,#18642); +#18641 = CARTESIAN_POINT('',(4.25,-3.4,0.)); +#18642 = VECTOR('',#18643,1.); +#18643 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18644 = ORIENTED_EDGE('',*,*,#18383,.T.); +#18645 = ORIENTED_EDGE('',*,*,#18624,.F.); +#18646 = PLANE('',#18647); +#18647 = AXIS2_PLACEMENT_3D('',#18648,#18649,#18650); +#18648 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#18649 = DIRECTION('',(0.,0.,1.)); +#18650 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18651 = ADVANCED_FACE('',(#18652),#18679,.T.); +#18652 = FACE_BOUND('',#18653,.T.); +#18653 = EDGE_LOOP('',(#18654,#18655,#18663,#18671,#18677,#18678)); +#18654 = ORIENTED_EDGE('',*,*,#18391,.T.); +#18655 = ORIENTED_EDGE('',*,*,#18656,.T.); +#18656 = EDGE_CURVE('',#18392,#18657,#18659,.T.); +#18657 = VERTEX_POINT('',#18658); +#18658 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#18659 = LINE('',#18660,#18661); +#18660 = CARTESIAN_POINT('',(4.25,2.35,1.)); +#18661 = VECTOR('',#18662,1.); +#18662 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#18663 = ORIENTED_EDGE('',*,*,#18664,.T.); +#18664 = EDGE_CURVE('',#18657,#18665,#18667,.T.); +#18665 = VERTEX_POINT('',#18666); +#18666 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#18667 = LINE('',#18668,#18669); +#18668 = CARTESIAN_POINT('',(4.25,0.5,0.3)); +#18669 = VECTOR('',#18670,1.); +#18670 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18671 = ORIENTED_EDGE('',*,*,#18672,.T.); +#18672 = EDGE_CURVE('',#18665,#17687,#18673,.T.); +#18673 = LINE('',#18674,#18675); +#18674 = CARTESIAN_POINT('',(4.25,-0.5,0.3)); +#18675 = VECTOR('',#18676,1.); +#18676 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18677 = ORIENTED_EDGE('',*,*,#17694,.T.); +#18678 = ORIENTED_EDGE('',*,*,#18639,.T.); +#18679 = PLANE('',#18680); +#18680 = AXIS2_PLACEMENT_3D('',#18681,#18682,#18683); +#18681 = CARTESIAN_POINT('',(4.25,-0.515451356496,0.330008245993)); +#18682 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#18683 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#18684 = ADVANCED_FACE('',(#18685),#18703,.F.); +#18685 = FACE_BOUND('',#18686,.F.); +#18686 = EDGE_LOOP('',(#18687,#18695,#18696,#18697)); +#18687 = ORIENTED_EDGE('',*,*,#18688,.T.); +#18688 = EDGE_CURVE('',#18689,#18665,#18691,.T.); +#18689 = VERTEX_POINT('',#18690); +#18690 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#18691 = LINE('',#18692,#18693); +#18692 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#18693 = VECTOR('',#18694,1.); +#18694 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18695 = ORIENTED_EDGE('',*,*,#18672,.T.); +#18696 = ORIENTED_EDGE('',*,*,#17686,.F.); +#18697 = ORIENTED_EDGE('',*,*,#18698,.F.); +#18698 = EDGE_CURVE('',#18689,#17679,#18699,.T.); +#18699 = LINE('',#18700,#18701); +#18700 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#18701 = VECTOR('',#18702,1.); +#18702 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18703 = PLANE('',#18704); +#18704 = AXIS2_PLACEMENT_3D('',#18705,#18706,#18707); +#18705 = CARTESIAN_POINT('',(5.75,-0.5,0.3)); +#18706 = DIRECTION('',(2.87351777816E-17,0.234640533104,0.972082208573) + ); +#18707 = DIRECTION('',(-1.190457365237E-16,-0.972082208573, + 0.234640533104)); +#18708 = ADVANCED_FACE('',(#18709),#18734,.F.); +#18709 = FACE_BOUND('',#18710,.F.); +#18710 = EDGE_LOOP('',(#18711,#18712,#18720,#18726,#18727,#18728)); +#18711 = ORIENTED_EDGE('',*,*,#18407,.T.); +#18712 = ORIENTED_EDGE('',*,*,#18713,.T.); +#18713 = EDGE_CURVE('',#18400,#18714,#18716,.T.); +#18714 = VERTEX_POINT('',#18715); +#18715 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#18716 = LINE('',#18717,#18718); +#18717 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#18718 = VECTOR('',#18719,1.); +#18719 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#18720 = ORIENTED_EDGE('',*,*,#18721,.T.); +#18721 = EDGE_CURVE('',#18714,#18689,#18722,.T.); +#18722 = LINE('',#18723,#18724); +#18723 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#18724 = VECTOR('',#18725,1.); +#18725 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18726 = ORIENTED_EDGE('',*,*,#18698,.T.); +#18727 = ORIENTED_EDGE('',*,*,#17678,.T.); +#18728 = ORIENTED_EDGE('',*,*,#18729,.T.); +#18729 = EDGE_CURVE('',#17671,#18188,#18730,.T.); +#18730 = LINE('',#18731,#18732); +#18731 = CARTESIAN_POINT('',(5.75,-3.4,0.)); +#18732 = VECTOR('',#18733,1.); +#18733 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18734 = PLANE('',#18735); +#18735 = AXIS2_PLACEMENT_3D('',#18736,#18737,#18738); +#18736 = CARTESIAN_POINT('',(5.75,-0.515451356496,0.330008245993)); +#18737 = DIRECTION('',(1.,-1.224646799147E-16,-1.256256073143E-32)); +#18738 = DIRECTION('',(-1.256256073143E-32,1.538469978883E-48,-1.)); +#18739 = ADVANCED_FACE('',(#18740),#18746,.F.); +#18740 = FACE_BOUND('',#18741,.F.); +#18741 = EDGE_LOOP('',(#18742,#18743,#18744,#18745)); +#18742 = ORIENTED_EDGE('',*,*,#17796,.T.); +#18743 = ORIENTED_EDGE('',*,*,#18187,.T.); +#18744 = ORIENTED_EDGE('',*,*,#18729,.F.); +#18745 = ORIENTED_EDGE('',*,*,#17670,.T.); +#18746 = PLANE('',#18747); +#18747 = AXIS2_PLACEMENT_3D('',#18748,#18749,#18750); +#18748 = CARTESIAN_POINT('',(2.5,-0.525,0.)); +#18749 = DIRECTION('',(0.,0.,1.)); +#18750 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18751 = ADVANCED_FACE('',(#18752),#18779,.F.); +#18752 = FACE_BOUND('',#18753,.F.); +#18753 = EDGE_LOOP('',(#18754,#18755,#18756,#18757,#18763,#18764,#18773) + ); +#18754 = ORIENTED_EDGE('',*,*,#17871,.T.); +#18755 = ORIENTED_EDGE('',*,*,#17782,.F.); +#18756 = ORIENTED_EDGE('',*,*,#18430,.T.); +#18757 = ORIENTED_EDGE('',*,*,#18758,.T.); +#18758 = EDGE_CURVE('',#18423,#18134,#18759,.T.); +#18759 = LINE('',#18760,#18761); +#18760 = CARTESIAN_POINT('',(6.6,-2.65,1.85)); +#18761 = VECTOR('',#18762,1.); +#18762 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18763 = ORIENTED_EDGE('',*,*,#18141,.F.); +#18764 = ORIENTED_EDGE('',*,*,#18765,.F.); +#18765 = EDGE_CURVE('',#18766,#18142,#18768,.T.); +#18766 = VERTEX_POINT('',#18767); +#18767 = CARTESIAN_POINT('',(6.6,1.,3.65)); +#18768 = CIRCLE('',#18769,0.5); +#18769 = AXIS2_PLACEMENT_3D('',#18770,#18771,#18772); +#18770 = CARTESIAN_POINT('',(6.6,1.,4.15)); +#18771 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#18772 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18773 = ORIENTED_EDGE('',*,*,#18774,.T.); +#18774 = EDGE_CURVE('',#18766,#17864,#18775,.T.); +#18775 = LINE('',#18776,#18777); +#18776 = CARTESIAN_POINT('',(6.6,-0.825,3.65)); +#18777 = VECTOR('',#18778,1.); +#18778 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18779 = PLANE('',#18780); +#18780 = AXIS2_PLACEMENT_3D('',#18781,#18782,#18783); +#18781 = CARTESIAN_POINT('',(6.6,-2.65,7.)); +#18782 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#18783 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18784 = ADVANCED_FACE('',(#18785),#18796,.T.); +#18785 = FACE_BOUND('',#18786,.T.); +#18786 = EDGE_LOOP('',(#18787,#18788,#18789,#18790)); +#18787 = ORIENTED_EDGE('',*,*,#17994,.F.); +#18788 = ORIENTED_EDGE('',*,*,#17839,.T.); +#18789 = ORIENTED_EDGE('',*,*,#18196,.T.); +#18790 = ORIENTED_EDGE('',*,*,#18791,.T.); +#18791 = EDGE_CURVE('',#18197,#17995,#18792,.T.); +#18792 = LINE('',#18793,#18794); +#18793 = CARTESIAN_POINT('',(5.5,2.35,7.)); +#18794 = VECTOR('',#18795,1.); +#18795 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18796 = PLANE('',#18797); +#18797 = AXIS2_PLACEMENT_3D('',#18798,#18799,#18800); +#18798 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#18799 = DIRECTION('',(0.,0.,1.)); +#18800 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18801 = ADVANCED_FACE('',(#18802),#18813,.F.); +#18802 = FACE_BOUND('',#18803,.F.); +#18803 = EDGE_LOOP('',(#18804,#18810,#18811,#18812)); +#18804 = ORIENTED_EDGE('',*,*,#18805,.T.); +#18805 = EDGE_CURVE('',#17815,#18766,#18806,.T.); +#18806 = LINE('',#18807,#18808); +#18807 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#18808 = VECTOR('',#18809,1.); +#18809 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18810 = ORIENTED_EDGE('',*,*,#18765,.T.); +#18811 = ORIENTED_EDGE('',*,*,#18149,.F.); +#18812 = ORIENTED_EDGE('',*,*,#17822,.T.); +#18813 = CYLINDRICAL_SURFACE('',#18814,0.5); +#18814 = AXIS2_PLACEMENT_3D('',#18815,#18816,#18817); +#18815 = CARTESIAN_POINT('',(7.45,1.,4.15)); +#18816 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#18817 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#18818 = ADVANCED_FACE('',(#18819),#18825,.T.); +#18819 = FACE_BOUND('',#18820,.T.); +#18820 = EDGE_LOOP('',(#18821,#18822,#18823,#18824)); +#18821 = ORIENTED_EDGE('',*,*,#17814,.F.); +#18822 = ORIENTED_EDGE('',*,*,#18805,.T.); +#18823 = ORIENTED_EDGE('',*,*,#18774,.T.); +#18824 = ORIENTED_EDGE('',*,*,#17863,.F.); +#18825 = PLANE('',#18826); +#18826 = AXIS2_PLACEMENT_3D('',#18827,#18828,#18829); +#18827 = CARTESIAN_POINT('',(7.45,1.,3.65)); +#18828 = DIRECTION('',(0.,0.,1.)); +#18829 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18830 = ADVANCED_FACE('',(#18831,#18837,#18871,#18905),#18939,.T.); +#18831 = FACE_BOUND('',#18832,.T.); +#18832 = EDGE_LOOP('',(#18833,#18834,#18835,#18836)); +#18833 = ORIENTED_EDGE('',*,*,#18133,.T.); +#18834 = ORIENTED_EDGE('',*,*,#17912,.T.); +#18835 = ORIENTED_EDGE('',*,*,#18422,.T.); +#18836 = ORIENTED_EDGE('',*,*,#18758,.T.); +#18837 = FACE_BOUND('',#18838,.T.); +#18838 = EDGE_LOOP('',(#18839,#18849,#18857,#18865)); +#18839 = ORIENTED_EDGE('',*,*,#18840,.F.); +#18840 = EDGE_CURVE('',#18841,#18843,#18845,.T.); +#18841 = VERTEX_POINT('',#18842); +#18842 = CARTESIAN_POINT('',(-0.32,0.32,1.85)); +#18843 = VERTEX_POINT('',#18844); +#18844 = CARTESIAN_POINT('',(-0.32,-0.32,1.85)); +#18845 = LINE('',#18846,#18847); +#18846 = CARTESIAN_POINT('',(-0.32,-0.26920299558,1.85)); +#18847 = VECTOR('',#18848,1.); +#18848 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18849 = ORIENTED_EDGE('',*,*,#18850,.T.); +#18850 = EDGE_CURVE('',#18841,#18851,#18853,.T.); +#18851 = VERTEX_POINT('',#18852); +#18852 = CARTESIAN_POINT('',(0.32,0.32,1.85)); +#18853 = LINE('',#18854,#18855); +#18854 = CARTESIAN_POINT('',(1.41,0.32,1.85)); +#18855 = VECTOR('',#18856,1.); +#18856 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#18857 = ORIENTED_EDGE('',*,*,#18858,.T.); +#18858 = EDGE_CURVE('',#18851,#18859,#18861,.T.); +#18859 = VERTEX_POINT('',#18860); +#18860 = CARTESIAN_POINT('',(0.32,-0.32,1.85)); +#18861 = LINE('',#18862,#18863); +#18862 = CARTESIAN_POINT('',(0.32,-0.26920299558,1.85)); +#18863 = VECTOR('',#18864,1.); +#18864 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18865 = ORIENTED_EDGE('',*,*,#18866,.T.); +#18866 = EDGE_CURVE('',#18859,#18843,#18867,.T.); +#18867 = LINE('',#18868,#18869); +#18868 = CARTESIAN_POINT('',(1.41,-0.32,1.85)); +#18869 = VECTOR('',#18870,1.); +#18870 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#18871 = FACE_BOUND('',#18872,.T.); +#18872 = EDGE_LOOP('',(#18873,#18883,#18891,#18899)); +#18873 = ORIENTED_EDGE('',*,*,#18874,.F.); +#18874 = EDGE_CURVE('',#18875,#18877,#18879,.T.); +#18875 = VERTEX_POINT('',#18876); +#18876 = CARTESIAN_POINT('',(4.68,0.32,1.85)); +#18877 = VERTEX_POINT('',#18878); +#18878 = CARTESIAN_POINT('',(4.68,-0.32,1.85)); +#18879 = LINE('',#18880,#18881); +#18880 = CARTESIAN_POINT('',(4.68,-0.26920299558,1.85)); +#18881 = VECTOR('',#18882,1.); +#18882 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18883 = ORIENTED_EDGE('',*,*,#18884,.T.); +#18884 = EDGE_CURVE('',#18875,#18885,#18887,.T.); +#18885 = VERTEX_POINT('',#18886); +#18886 = CARTESIAN_POINT('',(5.32,0.32,1.85)); +#18887 = LINE('',#18888,#18889); +#18888 = CARTESIAN_POINT('',(3.91,0.32,1.85)); +#18889 = VECTOR('',#18890,1.); +#18890 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#18891 = ORIENTED_EDGE('',*,*,#18892,.T.); +#18892 = EDGE_CURVE('',#18885,#18893,#18895,.T.); +#18893 = VERTEX_POINT('',#18894); +#18894 = CARTESIAN_POINT('',(5.32,-0.32,1.85)); +#18895 = LINE('',#18896,#18897); +#18896 = CARTESIAN_POINT('',(5.32,-0.26920299558,1.85)); +#18897 = VECTOR('',#18898,1.); +#18898 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18899 = ORIENTED_EDGE('',*,*,#18900,.T.); +#18900 = EDGE_CURVE('',#18893,#18877,#18901,.T.); +#18901 = LINE('',#18902,#18903); +#18902 = CARTESIAN_POINT('',(3.91,-0.32,1.85)); +#18903 = VECTOR('',#18904,1.); +#18904 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#18905 = FACE_BOUND('',#18906,.T.); +#18906 = EDGE_LOOP('',(#18907,#18917,#18925,#18933)); +#18907 = ORIENTED_EDGE('',*,*,#18908,.F.); +#18908 = EDGE_CURVE('',#18909,#18911,#18913,.T.); +#18909 = VERTEX_POINT('',#18910); +#18910 = CARTESIAN_POINT('',(2.18,0.32,1.85)); +#18911 = VERTEX_POINT('',#18912); +#18912 = CARTESIAN_POINT('',(2.18,-0.32,1.85)); +#18913 = LINE('',#18914,#18915); +#18914 = CARTESIAN_POINT('',(2.18,-0.2875,1.85)); +#18915 = VECTOR('',#18916,1.); +#18916 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18917 = ORIENTED_EDGE('',*,*,#18918,.T.); +#18918 = EDGE_CURVE('',#18909,#18919,#18921,.T.); +#18919 = VERTEX_POINT('',#18920); +#18920 = CARTESIAN_POINT('',(2.82,0.32,1.85)); +#18921 = LINE('',#18922,#18923); +#18922 = CARTESIAN_POINT('',(2.66,0.32,1.85)); +#18923 = VECTOR('',#18924,1.); +#18924 = DIRECTION('',(1.,-1.224646799147E-16,-7.789680114753E-33)); +#18925 = ORIENTED_EDGE('',*,*,#18926,.T.); +#18926 = EDGE_CURVE('',#18919,#18927,#18929,.T.); +#18927 = VERTEX_POINT('',#18928); +#18928 = CARTESIAN_POINT('',(2.82,-0.32,1.85)); +#18929 = LINE('',#18930,#18931); +#18930 = CARTESIAN_POINT('',(2.82,-0.2875,1.85)); +#18931 = VECTOR('',#18932,1.); +#18932 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18933 = ORIENTED_EDGE('',*,*,#18934,.T.); +#18934 = EDGE_CURVE('',#18927,#18911,#18935,.T.); +#18935 = LINE('',#18936,#18937); +#18936 = CARTESIAN_POINT('',(2.66,-0.32,1.85)); +#18937 = VECTOR('',#18938,1.); +#18938 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#18939 = PLANE('',#18940); +#18940 = AXIS2_PLACEMENT_3D('',#18941,#18942,#18943); +#18941 = CARTESIAN_POINT('',(2.5,-0.575,1.85)); +#18942 = DIRECTION('',(7.789680114753E-33,-9.539606818914E-49,1.)); +#18943 = DIRECTION('',(-1.,1.224646799147E-16,7.789680114753E-33)); +#18944 = ADVANCED_FACE('',(#18945),#18956,.F.); +#18945 = FACE_BOUND('',#18946,.F.); +#18946 = EDGE_LOOP('',(#18947,#18948,#18954,#18955)); +#18947 = ORIENTED_EDGE('',*,*,#18318,.F.); +#18948 = ORIENTED_EDGE('',*,*,#18949,.T.); +#18949 = EDGE_CURVE('',#18311,#18109,#18950,.T.); +#18950 = LINE('',#18951,#18952); +#18951 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#18952 = VECTOR('',#18953,1.); +#18953 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18954 = ORIENTED_EDGE('',*,*,#18116,.F.); +#18955 = ORIENTED_EDGE('',*,*,#18164,.F.); +#18956 = PLANE('',#18957); +#18957 = AXIS2_PLACEMENT_3D('',#18958,#18959,#18960); +#18958 = CARTESIAN_POINT('',(-0.5,2.35,6.1)); +#18959 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#18960 = DIRECTION('',(0.,0.,1.)); +#18961 = ADVANCED_FACE('',(#18962),#18973,.F.); +#18962 = FACE_BOUND('',#18963,.F.); +#18963 = EDGE_LOOP('',(#18964,#18965,#18971,#18972)); +#18964 = ORIENTED_EDGE('',*,*,#18310,.F.); +#18965 = ORIENTED_EDGE('',*,*,#18966,.T.); +#18966 = EDGE_CURVE('',#18303,#18101,#18967,.T.); +#18967 = LINE('',#18968,#18969); +#18968 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#18969 = VECTOR('',#18970,1.); +#18970 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18971 = ORIENTED_EDGE('',*,*,#18108,.F.); +#18972 = ORIENTED_EDGE('',*,*,#18949,.F.); +#18973 = PLANE('',#18974); +#18974 = AXIS2_PLACEMENT_3D('',#18975,#18976,#18977); +#18975 = CARTESIAN_POINT('',(-0.25,2.35,5.85)); +#18976 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#18977 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#18978 = ADVANCED_FACE('',(#18979),#18990,.F.); +#18979 = FACE_BOUND('',#18980,.F.); +#18980 = EDGE_LOOP('',(#18981,#18982,#18988,#18989)); +#18981 = ORIENTED_EDGE('',*,*,#18302,.F.); +#18982 = ORIENTED_EDGE('',*,*,#18983,.T.); +#18983 = EDGE_CURVE('',#18295,#18093,#18984,.T.); +#18984 = LINE('',#18985,#18986); +#18985 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#18986 = VECTOR('',#18987,1.); +#18987 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#18988 = ORIENTED_EDGE('',*,*,#18100,.F.); +#18989 = ORIENTED_EDGE('',*,*,#18966,.F.); +#18990 = PLANE('',#18991); +#18991 = AXIS2_PLACEMENT_3D('',#18992,#18993,#18994); +#18992 = CARTESIAN_POINT('',(-0.5,2.35,5.6)); +#18993 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#18994 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#18995 = ADVANCED_FACE('',(#18996),#19007,.F.); +#18996 = FACE_BOUND('',#18997,.F.); +#18997 = EDGE_LOOP('',(#18998,#18999,#19005,#19006)); +#18998 = ORIENTED_EDGE('',*,*,#18294,.F.); +#18999 = ORIENTED_EDGE('',*,*,#19000,.T.); +#19000 = EDGE_CURVE('',#18286,#18084,#19001,.T.); +#19001 = LINE('',#19002,#19003); +#19002 = CARTESIAN_POINT('',(-0.5,2.35,3.85)); +#19003 = VECTOR('',#19004,1.); +#19004 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19005 = ORIENTED_EDGE('',*,*,#18092,.F.); +#19006 = ORIENTED_EDGE('',*,*,#18983,.F.); +#19007 = PLANE('',#19008); +#19008 = AXIS2_PLACEMENT_3D('',#19009,#19010,#19011); +#19009 = CARTESIAN_POINT('',(-0.5,2.35,3.1)); +#19010 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19011 = DIRECTION('',(0.,0.,1.)); +#19012 = ADVANCED_FACE('',(#19013),#19024,.F.); +#19013 = FACE_BOUND('',#19014,.F.); +#19014 = EDGE_LOOP('',(#19015,#19016,#19017,#19018)); +#19015 = ORIENTED_EDGE('',*,*,#18083,.F.); +#19016 = ORIENTED_EDGE('',*,*,#19000,.F.); +#19017 = ORIENTED_EDGE('',*,*,#18285,.F.); +#19018 = ORIENTED_EDGE('',*,*,#19019,.T.); +#19019 = EDGE_CURVE('',#18278,#18076,#19020,.T.); +#19020 = LINE('',#19021,#19022); +#19021 = CARTESIAN_POINT('',(0.25,2.35,3.1)); +#19022 = VECTOR('',#19023,1.); +#19023 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19024 = CYLINDRICAL_SURFACE('',#19025,0.75); +#19025 = AXIS2_PLACEMENT_3D('',#19026,#19027,#19028); +#19026 = CARTESIAN_POINT('',(0.25,2.35,3.85)); +#19027 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19028 = DIRECTION('',(-0.,0.,-1.)); +#19029 = ADVANCED_FACE('',(#19030),#19041,.F.); +#19030 = FACE_BOUND('',#19031,.F.); +#19031 = EDGE_LOOP('',(#19032,#19033,#19034,#19040)); +#19032 = ORIENTED_EDGE('',*,*,#19019,.F.); +#19033 = ORIENTED_EDGE('',*,*,#18277,.F.); +#19034 = ORIENTED_EDGE('',*,*,#19035,.T.); +#19035 = EDGE_CURVE('',#18270,#18068,#19036,.T.); +#19036 = LINE('',#19037,#19038); +#19037 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#19038 = VECTOR('',#19039,1.); +#19039 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19040 = ORIENTED_EDGE('',*,*,#18075,.F.); +#19041 = PLANE('',#19042); +#19042 = AXIS2_PLACEMENT_3D('',#19043,#19044,#19045); +#19043 = CARTESIAN_POINT('',(1.,2.35,3.1)); +#19044 = DIRECTION('',(-0.,0.,-1.)); +#19045 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19046 = ADVANCED_FACE('',(#19047),#19058,.F.); +#19047 = FACE_BOUND('',#19048,.F.); +#19048 = EDGE_LOOP('',(#19049,#19050,#19056,#19057)); +#19049 = ORIENTED_EDGE('',*,*,#18269,.F.); +#19050 = ORIENTED_EDGE('',*,*,#19051,.T.); +#19051 = EDGE_CURVE('',#18262,#18060,#19052,.T.); +#19052 = LINE('',#19053,#19054); +#19053 = CARTESIAN_POINT('',(1.,2.35,7.)); +#19054 = VECTOR('',#19055,1.); +#19055 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19056 = ORIENTED_EDGE('',*,*,#18067,.F.); +#19057 = ORIENTED_EDGE('',*,*,#19035,.F.); +#19058 = PLANE('',#19059); +#19059 = AXIS2_PLACEMENT_3D('',#19060,#19061,#19062); +#19060 = CARTESIAN_POINT('',(1.,2.35,7.)); +#19061 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#19062 = DIRECTION('',(0.,-0.,-1.)); +#19063 = ADVANCED_FACE('',(#19064),#19075,.T.); +#19064 = FACE_BOUND('',#19065,.T.); +#19065 = EDGE_LOOP('',(#19066,#19067,#19073,#19074)); +#19066 = ORIENTED_EDGE('',*,*,#18059,.F.); +#19067 = ORIENTED_EDGE('',*,*,#19068,.F.); +#19068 = EDGE_CURVE('',#18254,#18052,#19069,.T.); +#19069 = LINE('',#19070,#19071); +#19070 = CARTESIAN_POINT('',(4.,2.35,7.)); +#19071 = VECTOR('',#19072,1.); +#19072 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19073 = ORIENTED_EDGE('',*,*,#18261,.T.); +#19074 = ORIENTED_EDGE('',*,*,#19051,.T.); +#19075 = PLANE('',#19076); +#19076 = AXIS2_PLACEMENT_3D('',#19077,#19078,#19079); +#19077 = CARTESIAN_POINT('',(2.5,-0.525,7.)); +#19078 = DIRECTION('',(0.,0.,1.)); +#19079 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19080 = ADVANCED_FACE('',(#19081),#19092,.T.); +#19081 = FACE_BOUND('',#19082,.T.); +#19082 = EDGE_LOOP('',(#19083,#19084,#19085,#19086)); +#19083 = ORIENTED_EDGE('',*,*,#18253,.F.); +#19084 = ORIENTED_EDGE('',*,*,#19068,.T.); +#19085 = ORIENTED_EDGE('',*,*,#18051,.F.); +#19086 = ORIENTED_EDGE('',*,*,#19087,.F.); +#19087 = EDGE_CURVE('',#18246,#18044,#19088,.T.); +#19088 = LINE('',#19089,#19090); +#19089 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#19090 = VECTOR('',#19091,1.); +#19091 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19092 = PLANE('',#19093); +#19093 = AXIS2_PLACEMENT_3D('',#19094,#19095,#19096); +#19094 = CARTESIAN_POINT('',(4.,2.35,7.)); +#19095 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#19096 = DIRECTION('',(0.,-0.,-1.)); +#19097 = ADVANCED_FACE('',(#19098),#19109,.T.); +#19098 = FACE_BOUND('',#19099,.T.); +#19099 = EDGE_LOOP('',(#19100,#19106,#19107,#19108)); +#19100 = ORIENTED_EDGE('',*,*,#19101,.F.); +#19101 = EDGE_CURVE('',#18237,#18035,#19102,.T.); +#19102 = LINE('',#19103,#19104); +#19103 = CARTESIAN_POINT('',(4.75,2.35,3.1)); +#19104 = VECTOR('',#19105,1.); +#19105 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19106 = ORIENTED_EDGE('',*,*,#18245,.F.); +#19107 = ORIENTED_EDGE('',*,*,#19087,.T.); +#19108 = ORIENTED_EDGE('',*,*,#18043,.F.); +#19109 = PLANE('',#19110); +#19110 = AXIS2_PLACEMENT_3D('',#19111,#19112,#19113); +#19111 = CARTESIAN_POINT('',(4.,2.35,3.1)); +#19112 = DIRECTION('',(0.,0.,1.)); +#19113 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#19114 = ADVANCED_FACE('',(#19115),#19126,.F.); +#19115 = FACE_BOUND('',#19116,.F.); +#19116 = EDGE_LOOP('',(#19117,#19118,#19119,#19125)); +#19117 = ORIENTED_EDGE('',*,*,#19101,.F.); +#19118 = ORIENTED_EDGE('',*,*,#18236,.T.); +#19119 = ORIENTED_EDGE('',*,*,#19120,.T.); +#19120 = EDGE_CURVE('',#18229,#18027,#19121,.T.); +#19121 = LINE('',#19122,#19123); +#19122 = CARTESIAN_POINT('',(5.5,2.35,3.85)); +#19123 = VECTOR('',#19124,1.); +#19124 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19125 = ORIENTED_EDGE('',*,*,#18034,.F.); +#19126 = CYLINDRICAL_SURFACE('',#19127,0.75); +#19127 = AXIS2_PLACEMENT_3D('',#19128,#19129,#19130); +#19128 = CARTESIAN_POINT('',(4.75,2.35,3.85)); +#19129 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19130 = DIRECTION('',(0.,-0.,-1.)); +#19131 = ADVANCED_FACE('',(#19132),#19143,.T.); +#19132 = FACE_BOUND('',#19133,.T.); +#19133 = EDGE_LOOP('',(#19134,#19135,#19136,#19137)); +#19134 = ORIENTED_EDGE('',*,*,#18228,.F.); +#19135 = ORIENTED_EDGE('',*,*,#19120,.T.); +#19136 = ORIENTED_EDGE('',*,*,#18026,.F.); +#19137 = ORIENTED_EDGE('',*,*,#19138,.F.); +#19138 = EDGE_CURVE('',#18221,#18019,#19139,.T.); +#19139 = LINE('',#19140,#19141); +#19140 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#19141 = VECTOR('',#19142,1.); +#19142 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19143 = PLANE('',#19144); +#19144 = AXIS2_PLACEMENT_3D('',#19145,#19146,#19147); +#19145 = CARTESIAN_POINT('',(5.5,2.35,3.1)); +#19146 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19147 = DIRECTION('',(0.,0.,1.)); +#19148 = ADVANCED_FACE('',(#19149),#19160,.T.); +#19149 = FACE_BOUND('',#19150,.T.); +#19150 = EDGE_LOOP('',(#19151,#19152,#19153,#19154)); +#19151 = ORIENTED_EDGE('',*,*,#18220,.F.); +#19152 = ORIENTED_EDGE('',*,*,#19138,.T.); +#19153 = ORIENTED_EDGE('',*,*,#18018,.F.); +#19154 = ORIENTED_EDGE('',*,*,#19155,.F.); +#19155 = EDGE_CURVE('',#18213,#18011,#19156,.T.); +#19156 = LINE('',#19157,#19158); +#19157 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#19158 = VECTOR('',#19159,1.); +#19159 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19160 = PLANE('',#19161); +#19161 = AXIS2_PLACEMENT_3D('',#19162,#19163,#19164); +#19162 = CARTESIAN_POINT('',(5.5,2.35,5.6)); +#19163 = DIRECTION('',(-0.707106781187,8.659560562349E-17, + -0.707106781187)); +#19164 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#19165 = ADVANCED_FACE('',(#19166),#19177,.T.); +#19166 = FACE_BOUND('',#19167,.T.); +#19167 = EDGE_LOOP('',(#19168,#19169,#19170,#19171)); +#19168 = ORIENTED_EDGE('',*,*,#18212,.F.); +#19169 = ORIENTED_EDGE('',*,*,#19155,.T.); +#19170 = ORIENTED_EDGE('',*,*,#18010,.F.); +#19171 = ORIENTED_EDGE('',*,*,#19172,.F.); +#19172 = EDGE_CURVE('',#18205,#18003,#19173,.T.); +#19173 = LINE('',#19174,#19175); +#19174 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#19175 = VECTOR('',#19176,1.); +#19176 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19177 = PLANE('',#19178); +#19178 = AXIS2_PLACEMENT_3D('',#19179,#19180,#19181); +#19179 = CARTESIAN_POINT('',(5.25,2.35,5.85)); +#19180 = DIRECTION('',(-0.707106781187,8.659560562349E-17,0.707106781187 + )); +#19181 = DIRECTION('',(0.707106781187,-8.659560562349E-17,0.707106781187 + )); +#19182 = ADVANCED_FACE('',(#19183),#19189,.T.); +#19183 = FACE_BOUND('',#19184,.T.); +#19184 = EDGE_LOOP('',(#19185,#19186,#19187,#19188)); +#19185 = ORIENTED_EDGE('',*,*,#18204,.F.); +#19186 = ORIENTED_EDGE('',*,*,#19172,.T.); +#19187 = ORIENTED_EDGE('',*,*,#18002,.F.); +#19188 = ORIENTED_EDGE('',*,*,#18791,.F.); +#19189 = PLANE('',#19190); +#19190 = AXIS2_PLACEMENT_3D('',#19191,#19192,#19193); +#19191 = CARTESIAN_POINT('',(5.5,2.35,6.1)); +#19192 = DIRECTION('',(-1.,1.224646799147E-16,4.93432455389E-16)); +#19193 = DIRECTION('',(4.93432455389E-16,-6.042804770875E-32,1.)); +#19194 = ADVANCED_FACE('',(#19195),#19206,.F.); +#19195 = FACE_BOUND('',#19196,.F.); +#19196 = EDGE_LOOP('',(#19197,#19198,#19199,#19205)); +#19197 = ORIENTED_EDGE('',*,*,#18399,.T.); +#19198 = ORIENTED_EDGE('',*,*,#18656,.T.); +#19199 = ORIENTED_EDGE('',*,*,#19200,.F.); +#19200 = EDGE_CURVE('',#18714,#18657,#19201,.T.); +#19201 = LINE('',#19202,#19203); +#19202 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#19203 = VECTOR('',#19204,1.); +#19204 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19205 = ORIENTED_EDGE('',*,*,#18713,.F.); +#19206 = PLANE('',#19207); +#19207 = AXIS2_PLACEMENT_3D('',#19208,#19209,#19210); +#19208 = CARTESIAN_POINT('',(5.75,2.35,1.)); +#19209 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#19210 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#19211 = ADVANCED_FACE('',(#19212),#19223,.F.); +#19212 = FACE_BOUND('',#19213,.F.); +#19213 = EDGE_LOOP('',(#19214,#19215,#19216,#19222)); +#19214 = ORIENTED_EDGE('',*,*,#18367,.T.); +#19215 = ORIENTED_EDGE('',*,*,#18551,.T.); +#19216 = ORIENTED_EDGE('',*,*,#19217,.F.); +#19217 = EDGE_CURVE('',#18609,#18552,#19218,.T.); +#19218 = LINE('',#19219,#19220); +#19219 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#19220 = VECTOR('',#19221,1.); +#19221 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19222 = ORIENTED_EDGE('',*,*,#18608,.F.); +#19223 = PLANE('',#19224); +#19224 = AXIS2_PLACEMENT_3D('',#19225,#19226,#19227); +#19225 = CARTESIAN_POINT('',(3.25,2.35,1.)); +#19226 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#19227 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#19228 = ADVANCED_FACE('',(#19229),#19240,.F.); +#19229 = FACE_BOUND('',#19230,.F.); +#19230 = EDGE_LOOP('',(#19231,#19232,#19233,#19239)); +#19231 = ORIENTED_EDGE('',*,*,#18335,.T.); +#19232 = ORIENTED_EDGE('',*,*,#18446,.T.); +#19233 = ORIENTED_EDGE('',*,*,#19234,.F.); +#19234 = EDGE_CURVE('',#18504,#18447,#19235,.T.); +#19235 = LINE('',#19236,#19237); +#19236 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#19237 = VECTOR('',#19238,1.); +#19238 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19239 = ORIENTED_EDGE('',*,*,#18503,.F.); +#19240 = PLANE('',#19241); +#19241 = AXIS2_PLACEMENT_3D('',#19242,#19243,#19244); +#19242 = CARTESIAN_POINT('',(0.75,2.35,1.)); +#19243 = DIRECTION('',(-4.33392824344E-17,-0.353892097416,0.935286257456 + )); +#19244 = DIRECTION('',(-1.14539532148E-16,-0.935286257456, + -0.353892097416)); +#19245 = ADVANCED_FACE('',(#19246,#19252),#19286,.F.); +#19246 = FACE_BOUND('',#19247,.F.); +#19247 = EDGE_LOOP('',(#19248,#19249,#19250,#19251)); +#19248 = ORIENTED_EDGE('',*,*,#19234,.T.); +#19249 = ORIENTED_EDGE('',*,*,#18454,.T.); +#19250 = ORIENTED_EDGE('',*,*,#18478,.F.); +#19251 = ORIENTED_EDGE('',*,*,#18511,.F.); +#19252 = FACE_BOUND('',#19253,.F.); +#19253 = EDGE_LOOP('',(#19254,#19264,#19272,#19280)); +#19254 = ORIENTED_EDGE('',*,*,#19255,.F.); +#19255 = EDGE_CURVE('',#19256,#19258,#19260,.T.); +#19256 = VERTEX_POINT('',#19257); +#19257 = CARTESIAN_POINT('',(-0.32,0.32,0.3)); +#19258 = VERTEX_POINT('',#19259); +#19259 = CARTESIAN_POINT('',(-0.32,-0.32,0.3)); +#19260 = LINE('',#19261,#19262); +#19261 = CARTESIAN_POINT('',(-0.32,0.26829700442,0.3)); +#19262 = VECTOR('',#19263,1.); +#19263 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19264 = ORIENTED_EDGE('',*,*,#19265,.T.); +#19265 = EDGE_CURVE('',#19256,#19266,#19268,.T.); +#19266 = VERTEX_POINT('',#19267); +#19267 = CARTESIAN_POINT('',(0.32,0.32,0.3)); +#19268 = LINE('',#19269,#19270); +#19269 = CARTESIAN_POINT('',(0.535,0.32,0.3)); +#19270 = VECTOR('',#19271,1.); +#19271 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#19272 = ORIENTED_EDGE('',*,*,#19273,.T.); +#19273 = EDGE_CURVE('',#19266,#19274,#19276,.T.); +#19274 = VERTEX_POINT('',#19275); +#19275 = CARTESIAN_POINT('',(0.32,-0.32,0.3)); +#19276 = LINE('',#19277,#19278); +#19277 = CARTESIAN_POINT('',(0.32,0.26829700442,0.3)); +#19278 = VECTOR('',#19279,1.); +#19279 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19280 = ORIENTED_EDGE('',*,*,#19281,.T.); +#19281 = EDGE_CURVE('',#19274,#19258,#19282,.T.); +#19282 = LINE('',#19283,#19284); +#19283 = CARTESIAN_POINT('',(0.535,-0.32,0.3)); +#19284 = VECTOR('',#19285,1.); +#19285 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19286 = PLANE('',#19287); +#19287 = AXIS2_PLACEMENT_3D('',#19288,#19289,#19290); +#19288 = CARTESIAN_POINT('',(0.75,0.5,0.3)); +#19289 = DIRECTION('',(0.,0.,1.)); +#19290 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19291 = ADVANCED_FACE('',(#19292,#19298),#19332,.F.); +#19292 = FACE_BOUND('',#19293,.F.); +#19293 = EDGE_LOOP('',(#19294,#19295,#19296,#19297)); +#19294 = ORIENTED_EDGE('',*,*,#19217,.T.); +#19295 = ORIENTED_EDGE('',*,*,#18559,.T.); +#19296 = ORIENTED_EDGE('',*,*,#18583,.F.); +#19297 = ORIENTED_EDGE('',*,*,#18616,.F.); +#19298 = FACE_BOUND('',#19299,.F.); +#19299 = EDGE_LOOP('',(#19300,#19310,#19318,#19326)); +#19300 = ORIENTED_EDGE('',*,*,#19301,.F.); +#19301 = EDGE_CURVE('',#19302,#19304,#19306,.T.); +#19302 = VERTEX_POINT('',#19303); +#19303 = CARTESIAN_POINT('',(2.18,0.32,0.3)); +#19304 = VERTEX_POINT('',#19305); +#19305 = CARTESIAN_POINT('',(2.18,-0.32,0.3)); +#19306 = LINE('',#19307,#19308); +#19307 = CARTESIAN_POINT('',(2.18,0.25,0.3)); +#19308 = VECTOR('',#19309,1.); +#19309 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19310 = ORIENTED_EDGE('',*,*,#19311,.T.); +#19311 = EDGE_CURVE('',#19302,#19312,#19314,.T.); +#19312 = VERTEX_POINT('',#19313); +#19313 = CARTESIAN_POINT('',(2.82,0.32,0.3)); +#19314 = LINE('',#19315,#19316); +#19315 = CARTESIAN_POINT('',(3.035,0.32,0.3)); +#19316 = VECTOR('',#19317,1.); +#19317 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#19318 = ORIENTED_EDGE('',*,*,#19319,.T.); +#19319 = EDGE_CURVE('',#19312,#19320,#19322,.T.); +#19320 = VERTEX_POINT('',#19321); +#19321 = CARTESIAN_POINT('',(2.82,-0.32,0.3)); +#19322 = LINE('',#19323,#19324); +#19323 = CARTESIAN_POINT('',(2.82,0.25,0.3)); +#19324 = VECTOR('',#19325,1.); +#19325 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19326 = ORIENTED_EDGE('',*,*,#19327,.T.); +#19327 = EDGE_CURVE('',#19320,#19304,#19328,.T.); +#19328 = LINE('',#19329,#19330); +#19329 = CARTESIAN_POINT('',(3.035,-0.32,0.3)); +#19330 = VECTOR('',#19331,1.); +#19331 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19332 = PLANE('',#19333); +#19333 = AXIS2_PLACEMENT_3D('',#19334,#19335,#19336); +#19334 = CARTESIAN_POINT('',(3.25,0.5,0.3)); +#19335 = DIRECTION('',(0.,0.,1.)); +#19336 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19337 = ADVANCED_FACE('',(#19338,#19344),#19378,.F.); +#19338 = FACE_BOUND('',#19339,.F.); +#19339 = EDGE_LOOP('',(#19340,#19341,#19342,#19343)); +#19340 = ORIENTED_EDGE('',*,*,#19200,.T.); +#19341 = ORIENTED_EDGE('',*,*,#18664,.T.); +#19342 = ORIENTED_EDGE('',*,*,#18688,.F.); +#19343 = ORIENTED_EDGE('',*,*,#18721,.F.); +#19344 = FACE_BOUND('',#19345,.F.); +#19345 = EDGE_LOOP('',(#19346,#19356,#19364,#19372)); +#19346 = ORIENTED_EDGE('',*,*,#19347,.F.); +#19347 = EDGE_CURVE('',#19348,#19350,#19352,.T.); +#19348 = VERTEX_POINT('',#19349); +#19349 = CARTESIAN_POINT('',(4.68,0.32,0.3)); +#19350 = VERTEX_POINT('',#19351); +#19351 = CARTESIAN_POINT('',(4.68,-0.32,0.3)); +#19352 = LINE('',#19353,#19354); +#19353 = CARTESIAN_POINT('',(4.68,0.26829700442,0.3)); +#19354 = VECTOR('',#19355,1.); +#19355 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19356 = ORIENTED_EDGE('',*,*,#19357,.T.); +#19357 = EDGE_CURVE('',#19348,#19358,#19360,.T.); +#19358 = VERTEX_POINT('',#19359); +#19359 = CARTESIAN_POINT('',(5.32,0.32,0.3)); +#19360 = LINE('',#19361,#19362); +#19361 = CARTESIAN_POINT('',(5.535,0.32,0.3)); +#19362 = VECTOR('',#19363,1.); +#19363 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#19364 = ORIENTED_EDGE('',*,*,#19365,.T.); +#19365 = EDGE_CURVE('',#19358,#19366,#19368,.T.); +#19366 = VERTEX_POINT('',#19367); +#19367 = CARTESIAN_POINT('',(5.32,-0.32,0.3)); +#19368 = LINE('',#19369,#19370); +#19369 = CARTESIAN_POINT('',(5.32,0.26829700442,0.3)); +#19370 = VECTOR('',#19371,1.); +#19371 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19372 = ORIENTED_EDGE('',*,*,#19373,.T.); +#19373 = EDGE_CURVE('',#19366,#19350,#19374,.T.); +#19374 = LINE('',#19375,#19376); +#19375 = CARTESIAN_POINT('',(5.535,-0.32,0.3)); +#19376 = VECTOR('',#19377,1.); +#19377 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19378 = PLANE('',#19379); +#19379 = AXIS2_PLACEMENT_3D('',#19380,#19381,#19382); +#19380 = CARTESIAN_POINT('',(5.75,0.5,0.3)); +#19381 = DIRECTION('',(0.,0.,1.)); +#19382 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19383 = ADVANCED_FACE('',(#19384),#19409,.T.); +#19384 = FACE_BOUND('',#19385,.T.); +#19385 = EDGE_LOOP('',(#19386,#19387,#19395,#19403)); +#19386 = ORIENTED_EDGE('',*,*,#18840,.T.); +#19387 = ORIENTED_EDGE('',*,*,#19388,.T.); +#19388 = EDGE_CURVE('',#18843,#19389,#19391,.T.); +#19389 = VERTEX_POINT('',#19390); +#19390 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#19391 = LINE('',#19392,#19393); +#19392 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#19393 = VECTOR('',#19394,1.); +#19394 = DIRECTION('',(0.,0.,1.)); +#19395 = ORIENTED_EDGE('',*,*,#19396,.T.); +#19396 = EDGE_CURVE('',#19389,#19397,#19399,.T.); +#19397 = VERTEX_POINT('',#19398); +#19398 = CARTESIAN_POINT('',(-0.32,0.32,6.3)); +#19399 = LINE('',#19400,#19401); +#19400 = CARTESIAN_POINT('',(-0.32,-0.32,6.3)); +#19401 = VECTOR('',#19402,1.); +#19402 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19403 = ORIENTED_EDGE('',*,*,#19404,.T.); +#19404 = EDGE_CURVE('',#19397,#18841,#19405,.T.); +#19405 = LINE('',#19406,#19407); +#19406 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#19407 = VECTOR('',#19408,1.); +#19408 = DIRECTION('',(-0.,0.,-1.)); +#19409 = PLANE('',#19410); +#19410 = AXIS2_PLACEMENT_3D('',#19411,#19412,#19413); +#19411 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#19412 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19413 = DIRECTION('',(0.,0.,1.)); +#19414 = ADVANCED_FACE('',(#19415),#19433,.F.); +#19415 = FACE_BOUND('',#19416,.F.); +#19416 = EDGE_LOOP('',(#19417,#19425,#19426,#19427)); +#19417 = ORIENTED_EDGE('',*,*,#19418,.F.); +#19418 = EDGE_CURVE('',#18859,#19419,#19421,.T.); +#19419 = VERTEX_POINT('',#19420); +#19420 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#19421 = LINE('',#19422,#19423); +#19422 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#19423 = VECTOR('',#19424,1.); +#19424 = DIRECTION('',(0.,0.,1.)); +#19425 = ORIENTED_EDGE('',*,*,#18866,.T.); +#19426 = ORIENTED_EDGE('',*,*,#19388,.T.); +#19427 = ORIENTED_EDGE('',*,*,#19428,.F.); +#19428 = EDGE_CURVE('',#19419,#19389,#19429,.T.); +#19429 = LINE('',#19430,#19431); +#19430 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#19431 = VECTOR('',#19432,1.); +#19432 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19433 = PLANE('',#19434); +#19434 = AXIS2_PLACEMENT_3D('',#19435,#19436,#19437); +#19435 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#19436 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19437 = DIRECTION('',(0.,-0.,1.)); +#19438 = ADVANCED_FACE('',(#19439),#19457,.F.); +#19439 = FACE_BOUND('',#19440,.F.); +#19440 = EDGE_LOOP('',(#19441,#19442,#19443,#19451)); +#19441 = ORIENTED_EDGE('',*,*,#18858,.T.); +#19442 = ORIENTED_EDGE('',*,*,#19418,.T.); +#19443 = ORIENTED_EDGE('',*,*,#19444,.T.); +#19444 = EDGE_CURVE('',#19419,#19445,#19447,.T.); +#19445 = VERTEX_POINT('',#19446); +#19446 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#19447 = LINE('',#19448,#19449); +#19448 = CARTESIAN_POINT('',(0.32,-0.32,6.3)); +#19449 = VECTOR('',#19450,1.); +#19450 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19451 = ORIENTED_EDGE('',*,*,#19452,.T.); +#19452 = EDGE_CURVE('',#19445,#18851,#19453,.T.); +#19453 = LINE('',#19454,#19455); +#19454 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#19455 = VECTOR('',#19456,1.); +#19456 = DIRECTION('',(-0.,0.,-1.)); +#19457 = PLANE('',#19458); +#19458 = AXIS2_PLACEMENT_3D('',#19459,#19460,#19461); +#19459 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#19460 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19461 = DIRECTION('',(0.,0.,1.)); +#19462 = ADVANCED_FACE('',(#19463),#19474,.F.); +#19463 = FACE_BOUND('',#19464,.F.); +#19464 = EDGE_LOOP('',(#19465,#19466,#19472,#19473)); +#19465 = ORIENTED_EDGE('',*,*,#19452,.F.); +#19466 = ORIENTED_EDGE('',*,*,#19467,.T.); +#19467 = EDGE_CURVE('',#19445,#19397,#19468,.T.); +#19468 = LINE('',#19469,#19470); +#19469 = CARTESIAN_POINT('',(0.32,0.32,6.3)); +#19470 = VECTOR('',#19471,1.); +#19471 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19472 = ORIENTED_EDGE('',*,*,#19404,.T.); +#19473 = ORIENTED_EDGE('',*,*,#18850,.T.); +#19474 = PLANE('',#19475); +#19475 = AXIS2_PLACEMENT_3D('',#19476,#19477,#19478); +#19476 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#19477 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19478 = DIRECTION('',(-0.,0.,-1.)); +#19479 = ADVANCED_FACE('',(#19480),#19505,.T.); +#19480 = FACE_BOUND('',#19481,.T.); +#19481 = EDGE_LOOP('',(#19482,#19483,#19491,#19499)); +#19482 = ORIENTED_EDGE('',*,*,#18874,.T.); +#19483 = ORIENTED_EDGE('',*,*,#19484,.T.); +#19484 = EDGE_CURVE('',#18877,#19485,#19487,.T.); +#19485 = VERTEX_POINT('',#19486); +#19486 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#19487 = LINE('',#19488,#19489); +#19488 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#19489 = VECTOR('',#19490,1.); +#19490 = DIRECTION('',(0.,0.,1.)); +#19491 = ORIENTED_EDGE('',*,*,#19492,.T.); +#19492 = EDGE_CURVE('',#19485,#19493,#19495,.T.); +#19493 = VERTEX_POINT('',#19494); +#19494 = CARTESIAN_POINT('',(4.68,0.32,6.3)); +#19495 = LINE('',#19496,#19497); +#19496 = CARTESIAN_POINT('',(4.68,-0.32,6.3)); +#19497 = VECTOR('',#19498,1.); +#19498 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19499 = ORIENTED_EDGE('',*,*,#19500,.T.); +#19500 = EDGE_CURVE('',#19493,#18875,#19501,.T.); +#19501 = LINE('',#19502,#19503); +#19502 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#19503 = VECTOR('',#19504,1.); +#19504 = DIRECTION('',(-0.,0.,-1.)); +#19505 = PLANE('',#19506); +#19506 = AXIS2_PLACEMENT_3D('',#19507,#19508,#19509); +#19507 = CARTESIAN_POINT('',(4.68,3.65940088399E-02,1.522832428212)); +#19508 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19509 = DIRECTION('',(0.,0.,1.)); +#19510 = ADVANCED_FACE('',(#19511),#19529,.F.); +#19511 = FACE_BOUND('',#19512,.F.); +#19512 = EDGE_LOOP('',(#19513,#19521,#19522,#19523)); +#19513 = ORIENTED_EDGE('',*,*,#19514,.F.); +#19514 = EDGE_CURVE('',#18893,#19515,#19517,.T.); +#19515 = VERTEX_POINT('',#19516); +#19516 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#19517 = LINE('',#19518,#19519); +#19518 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#19519 = VECTOR('',#19520,1.); +#19520 = DIRECTION('',(0.,0.,1.)); +#19521 = ORIENTED_EDGE('',*,*,#18900,.T.); +#19522 = ORIENTED_EDGE('',*,*,#19484,.T.); +#19523 = ORIENTED_EDGE('',*,*,#19524,.F.); +#19524 = EDGE_CURVE('',#19515,#19485,#19525,.T.); +#19525 = LINE('',#19526,#19527); +#19526 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#19527 = VECTOR('',#19528,1.); +#19528 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19529 = PLANE('',#19530); +#19530 = AXIS2_PLACEMENT_3D('',#19531,#19532,#19533); +#19531 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#19532 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19533 = DIRECTION('',(0.,-0.,1.)); +#19534 = ADVANCED_FACE('',(#19535),#19553,.F.); +#19535 = FACE_BOUND('',#19536,.F.); +#19536 = EDGE_LOOP('',(#19537,#19538,#19539,#19547)); +#19537 = ORIENTED_EDGE('',*,*,#18892,.T.); +#19538 = ORIENTED_EDGE('',*,*,#19514,.T.); +#19539 = ORIENTED_EDGE('',*,*,#19540,.T.); +#19540 = EDGE_CURVE('',#19515,#19541,#19543,.T.); +#19541 = VERTEX_POINT('',#19542); +#19542 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#19543 = LINE('',#19544,#19545); +#19544 = CARTESIAN_POINT('',(5.32,-0.32,6.3)); +#19545 = VECTOR('',#19546,1.); +#19546 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19547 = ORIENTED_EDGE('',*,*,#19548,.T.); +#19548 = EDGE_CURVE('',#19541,#18885,#19549,.T.); +#19549 = LINE('',#19550,#19551); +#19550 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#19551 = VECTOR('',#19552,1.); +#19552 = DIRECTION('',(-0.,0.,-1.)); +#19553 = PLANE('',#19554); +#19554 = AXIS2_PLACEMENT_3D('',#19555,#19556,#19557); +#19555 = CARTESIAN_POINT('',(5.32,3.65940088399E-02,1.522832428212)); +#19556 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19557 = DIRECTION('',(0.,0.,1.)); +#19558 = ADVANCED_FACE('',(#19559),#19570,.F.); +#19559 = FACE_BOUND('',#19560,.F.); +#19560 = EDGE_LOOP('',(#19561,#19562,#19568,#19569)); +#19561 = ORIENTED_EDGE('',*,*,#19548,.F.); +#19562 = ORIENTED_EDGE('',*,*,#19563,.T.); +#19563 = EDGE_CURVE('',#19541,#19493,#19564,.T.); +#19564 = LINE('',#19565,#19566); +#19565 = CARTESIAN_POINT('',(5.32,0.32,6.3)); +#19566 = VECTOR('',#19567,1.); +#19567 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19568 = ORIENTED_EDGE('',*,*,#19500,.T.); +#19569 = ORIENTED_EDGE('',*,*,#18884,.T.); +#19570 = PLANE('',#19571); +#19571 = AXIS2_PLACEMENT_3D('',#19572,#19573,#19574); +#19572 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#19573 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19574 = DIRECTION('',(-0.,0.,-1.)); +#19575 = ADVANCED_FACE('',(#19576),#19601,.T.); +#19576 = FACE_BOUND('',#19577,.T.); +#19577 = EDGE_LOOP('',(#19578,#19579,#19587,#19595)); +#19578 = ORIENTED_EDGE('',*,*,#18908,.T.); +#19579 = ORIENTED_EDGE('',*,*,#19580,.T.); +#19580 = EDGE_CURVE('',#18911,#19581,#19583,.T.); +#19581 = VERTEX_POINT('',#19582); +#19582 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#19583 = LINE('',#19584,#19585); +#19584 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#19585 = VECTOR('',#19586,1.); +#19586 = DIRECTION('',(0.,0.,1.)); +#19587 = ORIENTED_EDGE('',*,*,#19588,.T.); +#19588 = EDGE_CURVE('',#19581,#19589,#19591,.T.); +#19589 = VERTEX_POINT('',#19590); +#19590 = CARTESIAN_POINT('',(2.18,0.32,6.3)); +#19591 = LINE('',#19592,#19593); +#19592 = CARTESIAN_POINT('',(2.18,-0.32,6.3)); +#19593 = VECTOR('',#19594,1.); +#19594 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19595 = ORIENTED_EDGE('',*,*,#19596,.T.); +#19596 = EDGE_CURVE('',#19589,#18909,#19597,.T.); +#19597 = LINE('',#19598,#19599); +#19598 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#19599 = VECTOR('',#19600,1.); +#19600 = DIRECTION('',(-0.,0.,-1.)); +#19601 = PLANE('',#19602); +#19602 = AXIS2_PLACEMENT_3D('',#19603,#19604,#19605); +#19603 = CARTESIAN_POINT('',(2.18,3.918869757272E-17,1.55)); +#19604 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19605 = DIRECTION('',(0.,0.,1.)); +#19606 = ADVANCED_FACE('',(#19607),#19625,.F.); +#19607 = FACE_BOUND('',#19608,.F.); +#19608 = EDGE_LOOP('',(#19609,#19617,#19618,#19619)); +#19609 = ORIENTED_EDGE('',*,*,#19610,.F.); +#19610 = EDGE_CURVE('',#18927,#19611,#19613,.T.); +#19611 = VERTEX_POINT('',#19612); +#19612 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#19613 = LINE('',#19614,#19615); +#19614 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#19615 = VECTOR('',#19616,1.); +#19616 = DIRECTION('',(0.,0.,1.)); +#19617 = ORIENTED_EDGE('',*,*,#18934,.T.); +#19618 = ORIENTED_EDGE('',*,*,#19580,.T.); +#19619 = ORIENTED_EDGE('',*,*,#19620,.F.); +#19620 = EDGE_CURVE('',#19611,#19581,#19621,.T.); +#19621 = LINE('',#19622,#19623); +#19622 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#19623 = VECTOR('',#19624,1.); +#19624 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19625 = PLANE('',#19626); +#19626 = AXIS2_PLACEMENT_3D('',#19627,#19628,#19629); +#19627 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#19628 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19629 = DIRECTION('',(0.,-0.,1.)); +#19630 = ADVANCED_FACE('',(#19631),#19649,.F.); +#19631 = FACE_BOUND('',#19632,.F.); +#19632 = EDGE_LOOP('',(#19633,#19634,#19635,#19643)); +#19633 = ORIENTED_EDGE('',*,*,#18926,.T.); +#19634 = ORIENTED_EDGE('',*,*,#19610,.T.); +#19635 = ORIENTED_EDGE('',*,*,#19636,.T.); +#19636 = EDGE_CURVE('',#19611,#19637,#19639,.T.); +#19637 = VERTEX_POINT('',#19638); +#19638 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#19639 = LINE('',#19640,#19641); +#19640 = CARTESIAN_POINT('',(2.82,-0.32,6.3)); +#19641 = VECTOR('',#19642,1.); +#19642 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19643 = ORIENTED_EDGE('',*,*,#19644,.T.); +#19644 = EDGE_CURVE('',#19637,#18919,#19645,.T.); +#19645 = LINE('',#19646,#19647); +#19646 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#19647 = VECTOR('',#19648,1.); +#19648 = DIRECTION('',(-0.,0.,-1.)); +#19649 = PLANE('',#19650); +#19650 = AXIS2_PLACEMENT_3D('',#19651,#19652,#19653); +#19651 = CARTESIAN_POINT('',(2.82,-3.918869757272E-17,1.55)); +#19652 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19653 = DIRECTION('',(0.,0.,1.)); +#19654 = ADVANCED_FACE('',(#19655),#19666,.F.); +#19655 = FACE_BOUND('',#19656,.F.); +#19656 = EDGE_LOOP('',(#19657,#19658,#19664,#19665)); +#19657 = ORIENTED_EDGE('',*,*,#19644,.F.); +#19658 = ORIENTED_EDGE('',*,*,#19659,.T.); +#19659 = EDGE_CURVE('',#19637,#19589,#19660,.T.); +#19660 = LINE('',#19661,#19662); +#19661 = CARTESIAN_POINT('',(2.82,0.32,6.3)); +#19662 = VECTOR('',#19663,1.); +#19663 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19664 = ORIENTED_EDGE('',*,*,#19596,.T.); +#19665 = ORIENTED_EDGE('',*,*,#18918,.T.); +#19666 = PLANE('',#19667); +#19667 = AXIS2_PLACEMENT_3D('',#19668,#19669,#19670); +#19668 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#19669 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19670 = DIRECTION('',(-0.,0.,-1.)); +#19671 = ADVANCED_FACE('',(#19672),#19729,.T.); +#19672 = FACE_BOUND('',#19673,.T.); +#19673 = EDGE_LOOP('',(#19674,#19684,#19692,#19700,#19706,#19707,#19715, + #19723)); +#19674 = ORIENTED_EDGE('',*,*,#19675,.T.); +#19675 = EDGE_CURVE('',#19676,#19678,#19680,.T.); +#19676 = VERTEX_POINT('',#19677); +#19677 = CARTESIAN_POINT('',(-0.32,0.351578947368,-3.2)); +#19678 = VERTEX_POINT('',#19679); +#19679 = CARTESIAN_POINT('',(-0.32,-0.288421052632,-3.2)); +#19680 = LINE('',#19681,#19682); +#19681 = CARTESIAN_POINT('',(-0.32,0.32,-3.2)); +#19682 = VECTOR('',#19683,1.); +#19683 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19684 = ORIENTED_EDGE('',*,*,#19685,.T.); +#19685 = EDGE_CURVE('',#19678,#19686,#19688,.T.); +#19686 = VERTEX_POINT('',#19687); +#19687 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#19688 = LINE('',#19689,#19690); +#19689 = CARTESIAN_POINT('',(-0.32,-0.32,-3.4)); +#19690 = VECTOR('',#19691,1.); +#19691 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#19692 = ORIENTED_EDGE('',*,*,#19693,.T.); +#19693 = EDGE_CURVE('',#19686,#19694,#19696,.T.); +#19694 = VERTEX_POINT('',#19695); +#19695 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#19696 = LINE('',#19697,#19698); +#19697 = CARTESIAN_POINT('',(-0.32,-2.E-02,-1.5)); +#19698 = VECTOR('',#19699,1.); +#19699 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#19700 = ORIENTED_EDGE('',*,*,#19701,.T.); +#19701 = EDGE_CURVE('',#19694,#19258,#19702,.T.); +#19702 = LINE('',#19703,#19704); +#19703 = CARTESIAN_POINT('',(-0.32,-0.32,-0.9)); +#19704 = VECTOR('',#19705,1.); +#19705 = DIRECTION('',(0.,0.,1.)); +#19706 = ORIENTED_EDGE('',*,*,#19255,.F.); +#19707 = ORIENTED_EDGE('',*,*,#19708,.T.); +#19708 = EDGE_CURVE('',#19256,#19709,#19711,.T.); +#19709 = VERTEX_POINT('',#19710); +#19710 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#19711 = LINE('',#19712,#19713); +#19712 = CARTESIAN_POINT('',(-0.32,0.32,6.5)); +#19713 = VECTOR('',#19714,1.); +#19714 = DIRECTION('',(-0.,0.,-1.)); +#19715 = ORIENTED_EDGE('',*,*,#19716,.T.); +#19716 = EDGE_CURVE('',#19709,#19717,#19719,.T.); +#19717 = VERTEX_POINT('',#19718); +#19718 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#19719 = LINE('',#19720,#19721); +#19720 = CARTESIAN_POINT('',(-0.32,0.32,-0.9)); +#19721 = VECTOR('',#19722,1.); +#19722 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#19723 = ORIENTED_EDGE('',*,*,#19724,.T.); +#19724 = EDGE_CURVE('',#19717,#19676,#19725,.T.); +#19725 = LINE('',#19726,#19727); +#19726 = CARTESIAN_POINT('',(-0.32,0.62,-1.5)); +#19727 = VECTOR('',#19728,1.); +#19728 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#19729 = PLANE('',#19730); +#19730 = AXIS2_PLACEMENT_3D('',#19731,#19732,#19733); +#19731 = CARTESIAN_POINT('',(-0.32,3.65940088399E-02,1.522832428212)); +#19732 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19733 = DIRECTION('',(0.,0.,1.)); +#19734 = ADVANCED_FACE('',(#19735),#19753,.F.); +#19735 = FACE_BOUND('',#19736,.F.); +#19736 = EDGE_LOOP('',(#19737,#19745,#19751,#19752)); +#19737 = ORIENTED_EDGE('',*,*,#19738,.F.); +#19738 = EDGE_CURVE('',#19739,#19274,#19741,.T.); +#19739 = VERTEX_POINT('',#19740); +#19740 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#19741 = LINE('',#19742,#19743); +#19742 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#19743 = VECTOR('',#19744,1.); +#19744 = DIRECTION('',(0.,0.,1.)); +#19745 = ORIENTED_EDGE('',*,*,#19746,.T.); +#19746 = EDGE_CURVE('',#19739,#19694,#19747,.T.); +#19747 = LINE('',#19748,#19749); +#19748 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#19749 = VECTOR('',#19750,1.); +#19750 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19751 = ORIENTED_EDGE('',*,*,#19701,.T.); +#19752 = ORIENTED_EDGE('',*,*,#19281,.F.); +#19753 = PLANE('',#19754); +#19754 = AXIS2_PLACEMENT_3D('',#19755,#19756,#19757); +#19755 = CARTESIAN_POINT('',(0.32,-0.32,-0.9)); +#19756 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19757 = DIRECTION('',(0.,-0.,1.)); +#19758 = ADVANCED_FACE('',(#19759),#19809,.F.); +#19759 = FACE_BOUND('',#19760,.F.); +#19760 = EDGE_LOOP('',(#19761,#19771,#19779,#19785,#19786,#19787,#19795, + #19803)); +#19761 = ORIENTED_EDGE('',*,*,#19762,.T.); +#19762 = EDGE_CURVE('',#19763,#19765,#19767,.T.); +#19763 = VERTEX_POINT('',#19764); +#19764 = CARTESIAN_POINT('',(0.32,0.351578947368,-3.2)); +#19765 = VERTEX_POINT('',#19766); +#19766 = CARTESIAN_POINT('',(0.32,-0.288421052632,-3.2)); +#19767 = LINE('',#19768,#19769); +#19768 = CARTESIAN_POINT('',(0.32,0.32,-3.2)); +#19769 = VECTOR('',#19770,1.); +#19770 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19771 = ORIENTED_EDGE('',*,*,#19772,.T.); +#19772 = EDGE_CURVE('',#19765,#19773,#19775,.T.); +#19773 = VERTEX_POINT('',#19774); +#19774 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#19775 = LINE('',#19776,#19777); +#19776 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#19777 = VECTOR('',#19778,1.); +#19778 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#19779 = ORIENTED_EDGE('',*,*,#19780,.T.); +#19780 = EDGE_CURVE('',#19773,#19739,#19781,.T.); +#19781 = LINE('',#19782,#19783); +#19782 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#19783 = VECTOR('',#19784,1.); +#19784 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#19785 = ORIENTED_EDGE('',*,*,#19738,.T.); +#19786 = ORIENTED_EDGE('',*,*,#19273,.F.); +#19787 = ORIENTED_EDGE('',*,*,#19788,.T.); +#19788 = EDGE_CURVE('',#19266,#19789,#19791,.T.); +#19789 = VERTEX_POINT('',#19790); +#19790 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#19791 = LINE('',#19792,#19793); +#19792 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#19793 = VECTOR('',#19794,1.); +#19794 = DIRECTION('',(-0.,0.,-1.)); +#19795 = ORIENTED_EDGE('',*,*,#19796,.T.); +#19796 = EDGE_CURVE('',#19789,#19797,#19799,.T.); +#19797 = VERTEX_POINT('',#19798); +#19798 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#19799 = LINE('',#19800,#19801); +#19800 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#19801 = VECTOR('',#19802,1.); +#19802 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#19803 = ORIENTED_EDGE('',*,*,#19804,.T.); +#19804 = EDGE_CURVE('',#19797,#19763,#19805,.T.); +#19805 = LINE('',#19806,#19807); +#19806 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#19807 = VECTOR('',#19808,1.); +#19808 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#19809 = PLANE('',#19810); +#19810 = AXIS2_PLACEMENT_3D('',#19811,#19812,#19813); +#19811 = CARTESIAN_POINT('',(0.32,3.65940088399E-02,1.522832428212)); +#19812 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19813 = DIRECTION('',(0.,0.,1.)); +#19814 = ADVANCED_FACE('',(#19815),#19826,.F.); +#19815 = FACE_BOUND('',#19816,.F.); +#19816 = EDGE_LOOP('',(#19817,#19818,#19819,#19820)); +#19817 = ORIENTED_EDGE('',*,*,#19788,.F.); +#19818 = ORIENTED_EDGE('',*,*,#19265,.F.); +#19819 = ORIENTED_EDGE('',*,*,#19708,.T.); +#19820 = ORIENTED_EDGE('',*,*,#19821,.F.); +#19821 = EDGE_CURVE('',#19789,#19709,#19822,.T.); +#19822 = LINE('',#19823,#19824); +#19823 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#19824 = VECTOR('',#19825,1.); +#19825 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19826 = PLANE('',#19827); +#19827 = AXIS2_PLACEMENT_3D('',#19828,#19829,#19830); +#19828 = CARTESIAN_POINT('',(0.32,0.32,6.5)); +#19829 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19830 = DIRECTION('',(-0.,0.,-1.)); +#19831 = ADVANCED_FACE('',(#19832),#19857,.T.); +#19832 = FACE_BOUND('',#19833,.T.); +#19833 = EDGE_LOOP('',(#19834,#19844,#19850,#19851)); +#19834 = ORIENTED_EDGE('',*,*,#19835,.T.); +#19835 = EDGE_CURVE('',#19836,#19838,#19840,.T.); +#19836 = VERTEX_POINT('',#19837); +#19837 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#19838 = VERTEX_POINT('',#19839); +#19839 = CARTESIAN_POINT('',(2.18,-0.32,-3.2)); +#19840 = LINE('',#19841,#19842); +#19841 = CARTESIAN_POINT('',(2.18,0.32,-3.2)); +#19842 = VECTOR('',#19843,1.); +#19843 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19844 = ORIENTED_EDGE('',*,*,#19845,.T.); +#19845 = EDGE_CURVE('',#19838,#19304,#19846,.T.); +#19846 = LINE('',#19847,#19848); +#19847 = CARTESIAN_POINT('',(2.18,-0.32,-3.4)); +#19848 = VECTOR('',#19849,1.); +#19849 = DIRECTION('',(0.,0.,1.)); +#19850 = ORIENTED_EDGE('',*,*,#19301,.F.); +#19851 = ORIENTED_EDGE('',*,*,#19852,.T.); +#19852 = EDGE_CURVE('',#19302,#19836,#19853,.T.); +#19853 = LINE('',#19854,#19855); +#19854 = CARTESIAN_POINT('',(2.18,0.32,6.5)); +#19855 = VECTOR('',#19856,1.); +#19856 = DIRECTION('',(-0.,0.,-1.)); +#19857 = PLANE('',#19858); +#19858 = AXIS2_PLACEMENT_3D('',#19859,#19860,#19861); +#19859 = CARTESIAN_POINT('',(2.18,3.918869757272E-17,1.55)); +#19860 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19861 = DIRECTION('',(0.,0.,1.)); +#19862 = ADVANCED_FACE('',(#19863),#19881,.F.); +#19863 = FACE_BOUND('',#19864,.F.); +#19864 = EDGE_LOOP('',(#19865,#19873,#19879,#19880)); +#19865 = ORIENTED_EDGE('',*,*,#19866,.F.); +#19866 = EDGE_CURVE('',#19867,#19320,#19869,.T.); +#19867 = VERTEX_POINT('',#19868); +#19868 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#19869 = LINE('',#19870,#19871); +#19870 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#19871 = VECTOR('',#19872,1.); +#19872 = DIRECTION('',(0.,0.,1.)); +#19873 = ORIENTED_EDGE('',*,*,#19874,.T.); +#19874 = EDGE_CURVE('',#19867,#19838,#19875,.T.); +#19875 = LINE('',#19876,#19877); +#19876 = CARTESIAN_POINT('',(2.82,-0.32,-3.2)); +#19877 = VECTOR('',#19878,1.); +#19878 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19879 = ORIENTED_EDGE('',*,*,#19845,.T.); +#19880 = ORIENTED_EDGE('',*,*,#19327,.F.); +#19881 = PLANE('',#19882); +#19882 = AXIS2_PLACEMENT_3D('',#19883,#19884,#19885); +#19883 = CARTESIAN_POINT('',(2.82,-0.32,-3.4)); +#19884 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#19885 = DIRECTION('',(0.,-0.,1.)); +#19886 = ADVANCED_FACE('',(#19887),#19905,.F.); +#19887 = FACE_BOUND('',#19888,.F.); +#19888 = EDGE_LOOP('',(#19889,#19897,#19898,#19899)); +#19889 = ORIENTED_EDGE('',*,*,#19890,.T.); +#19890 = EDGE_CURVE('',#19891,#19867,#19893,.T.); +#19891 = VERTEX_POINT('',#19892); +#19892 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#19893 = LINE('',#19894,#19895); +#19894 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#19895 = VECTOR('',#19896,1.); +#19896 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19897 = ORIENTED_EDGE('',*,*,#19866,.T.); +#19898 = ORIENTED_EDGE('',*,*,#19319,.F.); +#19899 = ORIENTED_EDGE('',*,*,#19900,.T.); +#19900 = EDGE_CURVE('',#19312,#19891,#19901,.T.); +#19901 = LINE('',#19902,#19903); +#19902 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#19903 = VECTOR('',#19904,1.); +#19904 = DIRECTION('',(-0.,0.,-1.)); +#19905 = PLANE('',#19906); +#19906 = AXIS2_PLACEMENT_3D('',#19907,#19908,#19909); +#19907 = CARTESIAN_POINT('',(2.82,-3.918869757272E-17,1.55)); +#19908 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19909 = DIRECTION('',(0.,0.,1.)); +#19910 = ADVANCED_FACE('',(#19911),#19922,.F.); +#19911 = FACE_BOUND('',#19912,.F.); +#19912 = EDGE_LOOP('',(#19913,#19914,#19915,#19916)); +#19913 = ORIENTED_EDGE('',*,*,#19900,.F.); +#19914 = ORIENTED_EDGE('',*,*,#19311,.F.); +#19915 = ORIENTED_EDGE('',*,*,#19852,.T.); +#19916 = ORIENTED_EDGE('',*,*,#19917,.F.); +#19917 = EDGE_CURVE('',#19891,#19836,#19918,.T.); +#19918 = LINE('',#19919,#19920); +#19919 = CARTESIAN_POINT('',(2.82,0.32,-3.2)); +#19920 = VECTOR('',#19921,1.); +#19921 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19922 = PLANE('',#19923); +#19923 = AXIS2_PLACEMENT_3D('',#19924,#19925,#19926); +#19924 = CARTESIAN_POINT('',(2.82,0.32,6.5)); +#19925 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19926 = DIRECTION('',(-0.,0.,-1.)); +#19927 = ADVANCED_FACE('',(#19928),#19985,.T.); +#19928 = FACE_BOUND('',#19929,.T.); +#19929 = EDGE_LOOP('',(#19930,#19940,#19948,#19956,#19962,#19963,#19971, + #19979)); +#19930 = ORIENTED_EDGE('',*,*,#19931,.T.); +#19931 = EDGE_CURVE('',#19932,#19934,#19936,.T.); +#19932 = VERTEX_POINT('',#19933); +#19933 = CARTESIAN_POINT('',(4.68,0.351578947368,-3.2)); +#19934 = VERTEX_POINT('',#19935); +#19935 = CARTESIAN_POINT('',(4.68,-0.288421052632,-3.2)); +#19936 = LINE('',#19937,#19938); +#19937 = CARTESIAN_POINT('',(4.68,0.32,-3.2)); +#19938 = VECTOR('',#19939,1.); +#19939 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#19940 = ORIENTED_EDGE('',*,*,#19941,.T.); +#19941 = EDGE_CURVE('',#19934,#19942,#19944,.T.); +#19942 = VERTEX_POINT('',#19943); +#19943 = CARTESIAN_POINT('',(4.68,-2.E-02,-1.5)); +#19944 = LINE('',#19945,#19946); +#19945 = CARTESIAN_POINT('',(4.68,-0.32,-3.4)); +#19946 = VECTOR('',#19947,1.); +#19947 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#19948 = ORIENTED_EDGE('',*,*,#19949,.T.); +#19949 = EDGE_CURVE('',#19942,#19950,#19952,.T.); +#19950 = VERTEX_POINT('',#19951); +#19951 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#19952 = LINE('',#19953,#19954); +#19953 = CARTESIAN_POINT('',(4.68,-2.E-02,-1.5)); +#19954 = VECTOR('',#19955,1.); +#19955 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#19956 = ORIENTED_EDGE('',*,*,#19957,.T.); +#19957 = EDGE_CURVE('',#19950,#19350,#19958,.T.); +#19958 = LINE('',#19959,#19960); +#19959 = CARTESIAN_POINT('',(4.68,-0.32,-0.9)); +#19960 = VECTOR('',#19961,1.); +#19961 = DIRECTION('',(0.,0.,1.)); +#19962 = ORIENTED_EDGE('',*,*,#19347,.F.); +#19963 = ORIENTED_EDGE('',*,*,#19964,.T.); +#19964 = EDGE_CURVE('',#19348,#19965,#19967,.T.); +#19965 = VERTEX_POINT('',#19966); +#19966 = CARTESIAN_POINT('',(4.68,0.32,-0.9)); +#19967 = LINE('',#19968,#19969); +#19968 = CARTESIAN_POINT('',(4.68,0.32,6.5)); +#19969 = VECTOR('',#19970,1.); +#19970 = DIRECTION('',(-0.,0.,-1.)); +#19971 = ORIENTED_EDGE('',*,*,#19972,.T.); +#19972 = EDGE_CURVE('',#19965,#19973,#19975,.T.); +#19973 = VERTEX_POINT('',#19974); +#19974 = CARTESIAN_POINT('',(4.68,0.62,-1.5)); +#19975 = LINE('',#19976,#19977); +#19976 = CARTESIAN_POINT('',(4.68,0.32,-0.9)); +#19977 = VECTOR('',#19978,1.); +#19978 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#19979 = ORIENTED_EDGE('',*,*,#19980,.T.); +#19980 = EDGE_CURVE('',#19973,#19932,#19981,.T.); +#19981 = LINE('',#19982,#19983); +#19982 = CARTESIAN_POINT('',(4.68,0.62,-1.5)); +#19983 = VECTOR('',#19984,1.); +#19984 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#19985 = PLANE('',#19986); +#19986 = AXIS2_PLACEMENT_3D('',#19987,#19988,#19989); +#19987 = CARTESIAN_POINT('',(4.68,3.65940088399E-02,1.522832428212)); +#19988 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#19989 = DIRECTION('',(0.,0.,1.)); +#19990 = ADVANCED_FACE('',(#19991),#20009,.F.); +#19991 = FACE_BOUND('',#19992,.F.); +#19992 = EDGE_LOOP('',(#19993,#20001,#20007,#20008)); +#19993 = ORIENTED_EDGE('',*,*,#19994,.F.); +#19994 = EDGE_CURVE('',#19995,#19366,#19997,.T.); +#19995 = VERTEX_POINT('',#19996); +#19996 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#19997 = LINE('',#19998,#19999); +#19998 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#19999 = VECTOR('',#20000,1.); +#20000 = DIRECTION('',(0.,0.,1.)); +#20001 = ORIENTED_EDGE('',*,*,#20002,.T.); +#20002 = EDGE_CURVE('',#19995,#19950,#20003,.T.); +#20003 = LINE('',#20004,#20005); +#20004 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#20005 = VECTOR('',#20006,1.); +#20006 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20007 = ORIENTED_EDGE('',*,*,#19957,.T.); +#20008 = ORIENTED_EDGE('',*,*,#19373,.F.); +#20009 = PLANE('',#20010); +#20010 = AXIS2_PLACEMENT_3D('',#20011,#20012,#20013); +#20011 = CARTESIAN_POINT('',(5.32,-0.32,-0.9)); +#20012 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20013 = DIRECTION('',(0.,-0.,1.)); +#20014 = ADVANCED_FACE('',(#20015),#20065,.F.); +#20015 = FACE_BOUND('',#20016,.F.); +#20016 = EDGE_LOOP('',(#20017,#20027,#20035,#20041,#20042,#20043,#20051, + #20059)); +#20017 = ORIENTED_EDGE('',*,*,#20018,.T.); +#20018 = EDGE_CURVE('',#20019,#20021,#20023,.T.); +#20019 = VERTEX_POINT('',#20020); +#20020 = CARTESIAN_POINT('',(5.32,0.351578947368,-3.2)); +#20021 = VERTEX_POINT('',#20022); +#20022 = CARTESIAN_POINT('',(5.32,-0.288421052632,-3.2)); +#20023 = LINE('',#20024,#20025); +#20024 = CARTESIAN_POINT('',(5.32,0.32,-3.2)); +#20025 = VECTOR('',#20026,1.); +#20026 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20027 = ORIENTED_EDGE('',*,*,#20028,.T.); +#20028 = EDGE_CURVE('',#20021,#20029,#20031,.T.); +#20029 = VERTEX_POINT('',#20030); +#20030 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#20031 = LINE('',#20032,#20033); +#20032 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#20033 = VECTOR('',#20034,1.); +#20034 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#20035 = ORIENTED_EDGE('',*,*,#20036,.T.); +#20036 = EDGE_CURVE('',#20029,#19995,#20037,.T.); +#20037 = LINE('',#20038,#20039); +#20038 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#20039 = VECTOR('',#20040,1.); +#20040 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#20041 = ORIENTED_EDGE('',*,*,#19994,.T.); +#20042 = ORIENTED_EDGE('',*,*,#19365,.F.); +#20043 = ORIENTED_EDGE('',*,*,#20044,.T.); +#20044 = EDGE_CURVE('',#19358,#20045,#20047,.T.); +#20045 = VERTEX_POINT('',#20046); +#20046 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#20047 = LINE('',#20048,#20049); +#20048 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#20049 = VECTOR('',#20050,1.); +#20050 = DIRECTION('',(-0.,0.,-1.)); +#20051 = ORIENTED_EDGE('',*,*,#20052,.T.); +#20052 = EDGE_CURVE('',#20045,#20053,#20055,.T.); +#20053 = VERTEX_POINT('',#20054); +#20054 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#20055 = LINE('',#20056,#20057); +#20056 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#20057 = VECTOR('',#20058,1.); +#20058 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#20059 = ORIENTED_EDGE('',*,*,#20060,.T.); +#20060 = EDGE_CURVE('',#20053,#20019,#20061,.T.); +#20061 = LINE('',#20062,#20063); +#20062 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#20063 = VECTOR('',#20064,1.); +#20064 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#20065 = PLANE('',#20066); +#20066 = AXIS2_PLACEMENT_3D('',#20067,#20068,#20069); +#20067 = CARTESIAN_POINT('',(5.32,3.65940088399E-02,1.522832428212)); +#20068 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20069 = DIRECTION('',(0.,0.,1.)); +#20070 = ADVANCED_FACE('',(#20071),#20082,.F.); +#20071 = FACE_BOUND('',#20072,.F.); +#20072 = EDGE_LOOP('',(#20073,#20074,#20075,#20076)); +#20073 = ORIENTED_EDGE('',*,*,#20044,.F.); +#20074 = ORIENTED_EDGE('',*,*,#19357,.F.); +#20075 = ORIENTED_EDGE('',*,*,#19964,.T.); +#20076 = ORIENTED_EDGE('',*,*,#20077,.F.); +#20077 = EDGE_CURVE('',#20045,#19965,#20078,.T.); +#20078 = LINE('',#20079,#20080); +#20079 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#20080 = VECTOR('',#20081,1.); +#20081 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20082 = PLANE('',#20083); +#20083 = AXIS2_PLACEMENT_3D('',#20084,#20085,#20086); +#20084 = CARTESIAN_POINT('',(5.32,0.32,6.5)); +#20085 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20086 = DIRECTION('',(-0.,0.,-1.)); +#20087 = ADVANCED_FACE('',(#20088),#20113,.F.); +#20088 = FACE_BOUND('',#20089,.T.); +#20089 = EDGE_LOOP('',(#20090,#20098,#20106,#20112)); +#20090 = ORIENTED_EDGE('',*,*,#20091,.F.); +#20091 = EDGE_CURVE('',#20092,#19389,#20094,.T.); +#20092 = VERTEX_POINT('',#20093); +#20093 = CARTESIAN_POINT('',(-0.12,-0.12,6.5)); +#20094 = LINE('',#20095,#20096); +#20095 = CARTESIAN_POINT('',(-0.146666666667,-0.146666666667, + 6.473333333333)); +#20096 = VECTOR('',#20097,1.); +#20097 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#20098 = ORIENTED_EDGE('',*,*,#20099,.T.); +#20099 = EDGE_CURVE('',#20092,#20100,#20102,.T.); +#20100 = VERTEX_POINT('',#20101); +#20101 = CARTESIAN_POINT('',(-0.12,0.12,6.5)); +#20102 = LINE('',#20103,#20104); +#20103 = CARTESIAN_POINT('',(-0.12,-0.32,6.5)); +#20104 = VECTOR('',#20105,1.); +#20105 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20106 = ORIENTED_EDGE('',*,*,#20107,.T.); +#20107 = EDGE_CURVE('',#20100,#19397,#20108,.T.); +#20108 = LINE('',#20109,#20110); +#20109 = CARTESIAN_POINT('',(-4.E-02,4.E-02,6.58)); +#20110 = VECTOR('',#20111,1.); +#20111 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#20112 = ORIENTED_EDGE('',*,*,#19396,.F.); +#20113 = PLANE('',#20114); +#20114 = AXIS2_PLACEMENT_3D('',#20115,#20116,#20117); +#20115 = CARTESIAN_POINT('',(-0.22,-0.32,6.4)); +#20116 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#20117 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#20118 = ADVANCED_FACE('',(#20119),#20137,.T.); +#20119 = FACE_BOUND('',#20120,.F.); +#20120 = EDGE_LOOP('',(#20121,#20129,#20130,#20131)); +#20121 = ORIENTED_EDGE('',*,*,#20122,.T.); +#20122 = EDGE_CURVE('',#20123,#19419,#20125,.T.); +#20123 = VERTEX_POINT('',#20124); +#20124 = CARTESIAN_POINT('',(0.12,-0.12,6.5)); +#20125 = LINE('',#20126,#20127); +#20126 = CARTESIAN_POINT('',(0.253333333333,-0.253333333333, + 6.366666666667)); +#20127 = VECTOR('',#20128,1.); +#20128 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#20129 = ORIENTED_EDGE('',*,*,#19428,.T.); +#20130 = ORIENTED_EDGE('',*,*,#20091,.F.); +#20131 = ORIENTED_EDGE('',*,*,#20132,.F.); +#20132 = EDGE_CURVE('',#20123,#20092,#20133,.T.); +#20133 = LINE('',#20134,#20135); +#20134 = CARTESIAN_POINT('',(0.32,-0.12,6.5)); +#20135 = VECTOR('',#20136,1.); +#20136 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20137 = PLANE('',#20138); +#20138 = AXIS2_PLACEMENT_3D('',#20139,#20140,#20141); +#20139 = CARTESIAN_POINT('',(0.32,-0.22,6.4)); +#20140 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#20141 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#20142 = ADVANCED_FACE('',(#20143),#20161,.T.); +#20143 = FACE_BOUND('',#20144,.F.); +#20144 = EDGE_LOOP('',(#20145,#20146,#20154,#20160)); +#20145 = ORIENTED_EDGE('',*,*,#20122,.F.); +#20146 = ORIENTED_EDGE('',*,*,#20147,.T.); +#20147 = EDGE_CURVE('',#20123,#20148,#20150,.T.); +#20148 = VERTEX_POINT('',#20149); +#20149 = CARTESIAN_POINT('',(0.12,0.12,6.5)); +#20150 = LINE('',#20151,#20152); +#20151 = CARTESIAN_POINT('',(0.12,-0.32,6.5)); +#20152 = VECTOR('',#20153,1.); +#20153 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20154 = ORIENTED_EDGE('',*,*,#20155,.T.); +#20155 = EDGE_CURVE('',#20148,#19445,#20156,.T.); +#20156 = LINE('',#20157,#20158); +#20157 = CARTESIAN_POINT('',(0.146666666667,0.146666666667, + 6.473333333333)); +#20158 = VECTOR('',#20159,1.); +#20159 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#20160 = ORIENTED_EDGE('',*,*,#19444,.F.); +#20161 = PLANE('',#20162); +#20162 = AXIS2_PLACEMENT_3D('',#20163,#20164,#20165); +#20163 = CARTESIAN_POINT('',(0.22,-0.32,6.4)); +#20164 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#20165 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#20166 = ADVANCED_FACE('',(#20167),#20178,.T.); +#20167 = FACE_BOUND('',#20168,.F.); +#20168 = EDGE_LOOP('',(#20169,#20170,#20176,#20177)); +#20169 = ORIENTED_EDGE('',*,*,#20155,.F.); +#20170 = ORIENTED_EDGE('',*,*,#20171,.T.); +#20171 = EDGE_CURVE('',#20148,#20100,#20172,.T.); +#20172 = LINE('',#20173,#20174); +#20173 = CARTESIAN_POINT('',(0.32,0.12,6.5)); +#20174 = VECTOR('',#20175,1.); +#20175 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20176 = ORIENTED_EDGE('',*,*,#20107,.T.); +#20177 = ORIENTED_EDGE('',*,*,#19467,.F.); +#20178 = PLANE('',#20179); +#20179 = AXIS2_PLACEMENT_3D('',#20180,#20181,#20182); +#20180 = CARTESIAN_POINT('',(0.32,0.22,6.4)); +#20181 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#20182 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#20183 = ADVANCED_FACE('',(#20184),#20209,.F.); +#20184 = FACE_BOUND('',#20185,.T.); +#20185 = EDGE_LOOP('',(#20186,#20194,#20202,#20208)); +#20186 = ORIENTED_EDGE('',*,*,#20187,.F.); +#20187 = EDGE_CURVE('',#20188,#19485,#20190,.T.); +#20188 = VERTEX_POINT('',#20189); +#20189 = CARTESIAN_POINT('',(4.88,-0.12,6.5)); +#20190 = LINE('',#20191,#20192); +#20191 = CARTESIAN_POINT('',(4.853333333333,-0.146666666667, + 6.473333333333)); +#20192 = VECTOR('',#20193,1.); +#20193 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#20194 = ORIENTED_EDGE('',*,*,#20195,.T.); +#20195 = EDGE_CURVE('',#20188,#20196,#20198,.T.); +#20196 = VERTEX_POINT('',#20197); +#20197 = CARTESIAN_POINT('',(4.88,0.12,6.5)); +#20198 = LINE('',#20199,#20200); +#20199 = CARTESIAN_POINT('',(4.88,-0.32,6.5)); +#20200 = VECTOR('',#20201,1.); +#20201 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20202 = ORIENTED_EDGE('',*,*,#20203,.T.); +#20203 = EDGE_CURVE('',#20196,#19493,#20204,.T.); +#20204 = LINE('',#20205,#20206); +#20205 = CARTESIAN_POINT('',(4.96,4.E-02,6.58)); +#20206 = VECTOR('',#20207,1.); +#20207 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#20208 = ORIENTED_EDGE('',*,*,#19492,.F.); +#20209 = PLANE('',#20210); +#20210 = AXIS2_PLACEMENT_3D('',#20211,#20212,#20213); +#20211 = CARTESIAN_POINT('',(4.78,-0.32,6.4)); +#20212 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#20213 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#20214 = ADVANCED_FACE('',(#20215),#20233,.T.); +#20215 = FACE_BOUND('',#20216,.F.); +#20216 = EDGE_LOOP('',(#20217,#20225,#20226,#20227)); +#20217 = ORIENTED_EDGE('',*,*,#20218,.T.); +#20218 = EDGE_CURVE('',#20219,#19515,#20221,.T.); +#20219 = VERTEX_POINT('',#20220); +#20220 = CARTESIAN_POINT('',(5.12,-0.12,6.5)); +#20221 = LINE('',#20222,#20223); +#20222 = CARTESIAN_POINT('',(5.253333333333,-0.253333333333, + 6.366666666667)); +#20223 = VECTOR('',#20224,1.); +#20224 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#20225 = ORIENTED_EDGE('',*,*,#19524,.T.); +#20226 = ORIENTED_EDGE('',*,*,#20187,.F.); +#20227 = ORIENTED_EDGE('',*,*,#20228,.F.); +#20228 = EDGE_CURVE('',#20219,#20188,#20229,.T.); +#20229 = LINE('',#20230,#20231); +#20230 = CARTESIAN_POINT('',(5.32,-0.12,6.5)); +#20231 = VECTOR('',#20232,1.); +#20232 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20233 = PLANE('',#20234); +#20234 = AXIS2_PLACEMENT_3D('',#20235,#20236,#20237); +#20235 = CARTESIAN_POINT('',(5.32,-0.22,6.4)); +#20236 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#20237 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#20238 = ADVANCED_FACE('',(#20239),#20257,.T.); +#20239 = FACE_BOUND('',#20240,.F.); +#20240 = EDGE_LOOP('',(#20241,#20242,#20250,#20256)); +#20241 = ORIENTED_EDGE('',*,*,#20218,.F.); +#20242 = ORIENTED_EDGE('',*,*,#20243,.T.); +#20243 = EDGE_CURVE('',#20219,#20244,#20246,.T.); +#20244 = VERTEX_POINT('',#20245); +#20245 = CARTESIAN_POINT('',(5.12,0.12,6.5)); +#20246 = LINE('',#20247,#20248); +#20247 = CARTESIAN_POINT('',(5.12,-0.32,6.5)); +#20248 = VECTOR('',#20249,1.); +#20249 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20250 = ORIENTED_EDGE('',*,*,#20251,.T.); +#20251 = EDGE_CURVE('',#20244,#19541,#20252,.T.); +#20252 = LINE('',#20253,#20254); +#20253 = CARTESIAN_POINT('',(5.146666666667,0.146666666667, + 6.473333333333)); +#20254 = VECTOR('',#20255,1.); +#20255 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#20256 = ORIENTED_EDGE('',*,*,#19540,.F.); +#20257 = PLANE('',#20258); +#20258 = AXIS2_PLACEMENT_3D('',#20259,#20260,#20261); +#20259 = CARTESIAN_POINT('',(5.22,-0.32,6.4)); +#20260 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#20261 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#20262 = ADVANCED_FACE('',(#20263),#20274,.T.); +#20263 = FACE_BOUND('',#20264,.F.); +#20264 = EDGE_LOOP('',(#20265,#20266,#20272,#20273)); +#20265 = ORIENTED_EDGE('',*,*,#20251,.F.); +#20266 = ORIENTED_EDGE('',*,*,#20267,.T.); +#20267 = EDGE_CURVE('',#20244,#20196,#20268,.T.); +#20268 = LINE('',#20269,#20270); +#20269 = CARTESIAN_POINT('',(5.32,0.12,6.5)); +#20270 = VECTOR('',#20271,1.); +#20271 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20272 = ORIENTED_EDGE('',*,*,#20203,.T.); +#20273 = ORIENTED_EDGE('',*,*,#19563,.F.); +#20274 = PLANE('',#20275); +#20275 = AXIS2_PLACEMENT_3D('',#20276,#20277,#20278); +#20276 = CARTESIAN_POINT('',(5.32,0.22,6.4)); +#20277 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#20278 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#20279 = ADVANCED_FACE('',(#20280),#20305,.F.); +#20280 = FACE_BOUND('',#20281,.T.); +#20281 = EDGE_LOOP('',(#20282,#20290,#20298,#20304)); +#20282 = ORIENTED_EDGE('',*,*,#20283,.F.); +#20283 = EDGE_CURVE('',#20284,#19581,#20286,.T.); +#20284 = VERTEX_POINT('',#20285); +#20285 = CARTESIAN_POINT('',(2.38,-0.12,6.5)); +#20286 = LINE('',#20287,#20288); +#20287 = CARTESIAN_POINT('',(2.353333333333,-0.146666666667, + 6.473333333333)); +#20288 = VECTOR('',#20289,1.); +#20289 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#20290 = ORIENTED_EDGE('',*,*,#20291,.T.); +#20291 = EDGE_CURVE('',#20284,#20292,#20294,.T.); +#20292 = VERTEX_POINT('',#20293); +#20293 = CARTESIAN_POINT('',(2.38,0.12,6.5)); +#20294 = LINE('',#20295,#20296); +#20295 = CARTESIAN_POINT('',(2.38,-0.32,6.5)); +#20296 = VECTOR('',#20297,1.); +#20297 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20298 = ORIENTED_EDGE('',*,*,#20299,.T.); +#20299 = EDGE_CURVE('',#20292,#19589,#20300,.T.); +#20300 = LINE('',#20301,#20302); +#20301 = CARTESIAN_POINT('',(2.46,4.E-02,6.58)); +#20302 = VECTOR('',#20303,1.); +#20303 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#20304 = ORIENTED_EDGE('',*,*,#19588,.F.); +#20305 = PLANE('',#20306); +#20306 = AXIS2_PLACEMENT_3D('',#20307,#20308,#20309); +#20307 = CARTESIAN_POINT('',(2.28,-0.32,6.4)); +#20308 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#20309 = DIRECTION('',(-1.212375546256E-16,-1.,-1.227125289196E-18)); +#20310 = ADVANCED_FACE('',(#20311),#20329,.T.); +#20311 = FACE_BOUND('',#20312,.F.); +#20312 = EDGE_LOOP('',(#20313,#20321,#20322,#20323)); +#20313 = ORIENTED_EDGE('',*,*,#20314,.F.); +#20314 = EDGE_CURVE('',#19611,#20315,#20317,.T.); +#20315 = VERTEX_POINT('',#20316); +#20316 = CARTESIAN_POINT('',(2.62,-0.12,6.5)); +#20317 = LINE('',#20318,#20319); +#20318 = CARTESIAN_POINT('',(2.753333333333,-0.253333333333, + 6.366666666667)); +#20319 = VECTOR('',#20320,1.); +#20320 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#20321 = ORIENTED_EDGE('',*,*,#19620,.T.); +#20322 = ORIENTED_EDGE('',*,*,#20283,.F.); +#20323 = ORIENTED_EDGE('',*,*,#20324,.F.); +#20324 = EDGE_CURVE('',#20315,#20284,#20325,.T.); +#20325 = LINE('',#20326,#20327); +#20326 = CARTESIAN_POINT('',(2.82,-0.12,6.5)); +#20327 = VECTOR('',#20328,1.); +#20328 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20329 = PLANE('',#20330); +#20330 = AXIS2_PLACEMENT_3D('',#20331,#20332,#20333); +#20331 = CARTESIAN_POINT('',(2.82,-0.22,6.4)); +#20332 = DIRECTION('',(-8.833102285013E-17,-0.707106781187, + 0.707106781187)); +#20333 = DIRECTION('',(1.,-1.236918052038E-16,1.227125289097E-18)); +#20334 = ADVANCED_FACE('',(#20335),#20353,.T.); +#20335 = FACE_BOUND('',#20336,.F.); +#20336 = EDGE_LOOP('',(#20337,#20338,#20346,#20352)); +#20337 = ORIENTED_EDGE('',*,*,#20314,.T.); +#20338 = ORIENTED_EDGE('',*,*,#20339,.T.); +#20339 = EDGE_CURVE('',#20315,#20340,#20342,.T.); +#20340 = VERTEX_POINT('',#20341); +#20341 = CARTESIAN_POINT('',(2.62,0.12,6.5)); +#20342 = LINE('',#20343,#20344); +#20343 = CARTESIAN_POINT('',(2.62,-0.32,6.5)); +#20344 = VECTOR('',#20345,1.); +#20345 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20346 = ORIENTED_EDGE('',*,*,#20347,.T.); +#20347 = EDGE_CURVE('',#20340,#19637,#20348,.T.); +#20348 = LINE('',#20349,#20350); +#20349 = CARTESIAN_POINT('',(2.646666666667,0.146666666667, + 6.473333333333)); +#20350 = VECTOR('',#20351,1.); +#20351 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#20352 = ORIENTED_EDGE('',*,*,#19636,.F.); +#20353 = PLANE('',#20354); +#20354 = AXIS2_PLACEMENT_3D('',#20355,#20356,#20357); +#20355 = CARTESIAN_POINT('',(2.72,-0.32,6.4)); +#20356 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#20357 = DIRECTION('',(-1.236918052038E-16,-1.,-1.227125289097E-18)); +#20358 = ADVANCED_FACE('',(#20359),#20370,.T.); +#20359 = FACE_BOUND('',#20360,.F.); +#20360 = EDGE_LOOP('',(#20361,#20362,#20368,#20369)); +#20361 = ORIENTED_EDGE('',*,*,#20347,.F.); +#20362 = ORIENTED_EDGE('',*,*,#20363,.T.); +#20363 = EDGE_CURVE('',#20340,#20292,#20364,.T.); +#20364 = LINE('',#20365,#20366); +#20365 = CARTESIAN_POINT('',(2.82,0.12,6.5)); +#20366 = VECTOR('',#20367,1.); +#20367 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20368 = ORIENTED_EDGE('',*,*,#20299,.T.); +#20369 = ORIENTED_EDGE('',*,*,#19659,.F.); +#20370 = PLANE('',#20371); +#20371 = AXIS2_PLACEMENT_3D('',#20372,#20373,#20374); +#20372 = CARTESIAN_POINT('',(2.82,0.22,6.4)); +#20373 = DIRECTION('',(8.833102285013E-17,0.707106781187,0.707106781187) + ); +#20374 = DIRECTION('',(1.,-1.236918052038E-16,-1.227125289097E-18)); +#20375 = ADVANCED_FACE('',(#20376),#20417,.F.); +#20376 = FACE_BOUND('',#20377,.T.); +#20377 = EDGE_LOOP('',(#20378,#20388,#20396,#20404,#20410,#20411)); +#20378 = ORIENTED_EDGE('',*,*,#20379,.F.); +#20379 = EDGE_CURVE('',#20380,#20382,#20384,.T.); +#20380 = VERTEX_POINT('',#20381); +#20381 = CARTESIAN_POINT('',(-0.12,0.12,-3.4)); +#20382 = VERTEX_POINT('',#20383); +#20383 = CARTESIAN_POINT('',(-0.317552593066,0.351192514695, + -3.202447406934)); +#20384 = LINE('',#20385,#20386); +#20385 = CARTESIAN_POINT('',(-0.153849098111,0.159613036666, + -3.366150901889)); +#20386 = VECTOR('',#20387,1.); +#20387 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#20388 = ORIENTED_EDGE('',*,*,#20389,.T.); +#20389 = EDGE_CURVE('',#20380,#20390,#20392,.T.); +#20390 = VERTEX_POINT('',#20391); +#20391 = CARTESIAN_POINT('',(-0.12,-0.12,-3.4)); +#20392 = LINE('',#20393,#20394); +#20393 = CARTESIAN_POINT('',(-0.12,0.32,-3.4)); +#20394 = VECTOR('',#20395,1.); +#20395 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20396 = ORIENTED_EDGE('',*,*,#20397,.T.); +#20397 = EDGE_CURVE('',#20390,#20398,#20400,.T.); +#20398 = VERTEX_POINT('',#20399); +#20399 = CARTESIAN_POINT('',(-0.317552593066,-0.288807485305, + -3.202447406934)); +#20400 = LINE('',#20401,#20402); +#20401 = CARTESIAN_POINT('',(-3.848855660758E-02,-5.034896900541E-02, + -3.481511443392)); +#20402 = VECTOR('',#20403,1.); +#20403 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#20404 = ORIENTED_EDGE('',*,*,#20405,.T.); +#20405 = EDGE_CURVE('',#20398,#19678,#20406,.T.); +#20406 = LINE('',#20407,#20408); +#20407 = CARTESIAN_POINT('',(-8.569083447332E-02,-0.325417236662, + -3.434309165527)); +#20408 = VECTOR('',#20409,1.); +#20409 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#20410 = ORIENTED_EDGE('',*,*,#19675,.F.); +#20411 = ORIENTED_EDGE('',*,*,#20412,.F.); +#20412 = EDGE_CURVE('',#20382,#19676,#20413,.T.); +#20413 = LINE('',#20414,#20415); +#20414 = CARTESIAN_POINT('',(-0.541586867305,0.386566347469, + -2.978413132695)); +#20415 = VECTOR('',#20416,1.); +#20416 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#20417 = PLANE('',#20418); +#20418 = AXIS2_PLACEMENT_3D('',#20419,#20420,#20421); +#20419 = CARTESIAN_POINT('',(-0.22,0.32,-3.3)); +#20420 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#20421 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#20422 = ADVANCED_FACE('',(#20423),#20448,.F.); +#20423 = FACE_BOUND('',#20424,.F.); +#20424 = EDGE_LOOP('',(#20425,#20426,#20432,#20433,#20434,#20442)); +#20425 = ORIENTED_EDGE('',*,*,#19804,.F.); +#20426 = ORIENTED_EDGE('',*,*,#20427,.T.); +#20427 = EDGE_CURVE('',#19797,#19717,#20428,.T.); +#20428 = LINE('',#20429,#20430); +#20429 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#20430 = VECTOR('',#20431,1.); +#20431 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20432 = ORIENTED_EDGE('',*,*,#19724,.T.); +#20433 = ORIENTED_EDGE('',*,*,#20412,.F.); +#20434 = ORIENTED_EDGE('',*,*,#20435,.F.); +#20435 = EDGE_CURVE('',#20436,#20382,#20438,.T.); +#20436 = VERTEX_POINT('',#20437); +#20437 = CARTESIAN_POINT('',(0.317552593066,0.351192514695, + -3.202447406934)); +#20438 = LINE('',#20439,#20440); +#20439 = CARTESIAN_POINT('',(0.32,0.351192514695,-3.202447406934)); +#20440 = VECTOR('',#20441,1.); +#20441 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20442 = ORIENTED_EDGE('',*,*,#20443,.T.); +#20443 = EDGE_CURVE('',#20436,#19763,#20444,.T.); +#20444 = LINE('',#20445,#20446); +#20445 = CARTESIAN_POINT('',(0.699616963064,0.411518467852, + -2.820383036936)); +#20446 = VECTOR('',#20447,1.); +#20447 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#20448 = PLANE('',#20449); +#20449 = AXIS2_PLACEMENT_3D('',#20450,#20451,#20452); +#20450 = CARTESIAN_POINT('',(0.32,0.62,-1.5)); +#20451 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#20452 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#20453 = ADVANCED_FACE('',(#20454),#20460,.F.); +#20454 = FACE_BOUND('',#20455,.F.); +#20455 = EDGE_LOOP('',(#20456,#20457,#20458,#20459)); +#20456 = ORIENTED_EDGE('',*,*,#19821,.T.); +#20457 = ORIENTED_EDGE('',*,*,#19716,.T.); +#20458 = ORIENTED_EDGE('',*,*,#20427,.F.); +#20459 = ORIENTED_EDGE('',*,*,#19796,.F.); +#20460 = PLANE('',#20461); +#20461 = AXIS2_PLACEMENT_3D('',#20462,#20463,#20464); +#20462 = CARTESIAN_POINT('',(0.32,0.32,-0.9)); +#20463 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#20464 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#20465 = ADVANCED_FACE('',(#20466),#20477,.F.); +#20466 = FACE_BOUND('',#20467,.F.); +#20467 = EDGE_LOOP('',(#20468,#20474,#20475,#20476)); +#20468 = ORIENTED_EDGE('',*,*,#20469,.T.); +#20469 = EDGE_CURVE('',#19773,#19686,#20470,.T.); +#20470 = LINE('',#20471,#20472); +#20471 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#20472 = VECTOR('',#20473,1.); +#20473 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20474 = ORIENTED_EDGE('',*,*,#19693,.T.); +#20475 = ORIENTED_EDGE('',*,*,#19746,.F.); +#20476 = ORIENTED_EDGE('',*,*,#19780,.F.); +#20477 = PLANE('',#20478); +#20478 = AXIS2_PLACEMENT_3D('',#20479,#20480,#20481); +#20479 = CARTESIAN_POINT('',(0.32,-2.E-02,-1.5)); +#20480 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#20481 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#20482 = ADVANCED_FACE('',(#20483),#20503,.F.); +#20483 = FACE_BOUND('',#20484,.F.); +#20484 = EDGE_LOOP('',(#20485,#20486,#20494,#20500,#20501,#20502)); +#20485 = ORIENTED_EDGE('',*,*,#19772,.F.); +#20486 = ORIENTED_EDGE('',*,*,#20487,.F.); +#20487 = EDGE_CURVE('',#20488,#19765,#20490,.T.); +#20488 = VERTEX_POINT('',#20489); +#20489 = CARTESIAN_POINT('',(0.317552593066,-0.288807485305, + -3.202447406934)); +#20490 = LINE('',#20491,#20492); +#20491 = CARTESIAN_POINT('',(0.243720930233,-0.300465116279, + -3.276279069767)); +#20492 = VECTOR('',#20493,1.); +#20493 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#20494 = ORIENTED_EDGE('',*,*,#20495,.T.); +#20495 = EDGE_CURVE('',#20488,#20398,#20496,.T.); +#20496 = LINE('',#20497,#20498); +#20497 = CARTESIAN_POINT('',(0.32,-0.288807485305,-3.202447406934)); +#20498 = VECTOR('',#20499,1.); +#20499 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20500 = ORIENTED_EDGE('',*,*,#20405,.T.); +#20501 = ORIENTED_EDGE('',*,*,#19685,.T.); +#20502 = ORIENTED_EDGE('',*,*,#20469,.F.); +#20503 = PLANE('',#20504); +#20504 = AXIS2_PLACEMENT_3D('',#20505,#20506,#20507); +#20505 = CARTESIAN_POINT('',(0.32,-0.32,-3.4)); +#20506 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#20507 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#20508 = ADVANCED_FACE('',(#20509),#20536,.T.); +#20509 = FACE_BOUND('',#20510,.F.); +#20510 = EDGE_LOOP('',(#20511,#20519,#20527,#20533,#20534,#20535)); +#20511 = ORIENTED_EDGE('',*,*,#20512,.F.); +#20512 = EDGE_CURVE('',#20513,#20436,#20515,.T.); +#20513 = VERTEX_POINT('',#20514); +#20514 = CARTESIAN_POINT('',(0.12,0.12,-3.4)); +#20515 = LINE('',#20516,#20517); +#20516 = CARTESIAN_POINT('',(0.24881689775,0.270752273427,-3.27118310225 + )); +#20517 = VECTOR('',#20518,1.); +#20518 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#20519 = ORIENTED_EDGE('',*,*,#20520,.T.); +#20520 = EDGE_CURVE('',#20513,#20521,#20523,.T.); +#20521 = VERTEX_POINT('',#20522); +#20522 = CARTESIAN_POINT('',(0.12,-0.12,-3.4)); +#20523 = LINE('',#20524,#20525); +#20524 = CARTESIAN_POINT('',(0.12,0.32,-3.4)); +#20525 = VECTOR('',#20526,1.); +#20526 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20527 = ORIENTED_EDGE('',*,*,#20528,.T.); +#20528 = EDGE_CURVE('',#20521,#20488,#20529,.T.); +#20529 = LINE('',#20530,#20531); +#20530 = CARTESIAN_POINT('',(0.155697812072,-0.150503562587, + -3.364302187928)); +#20531 = VECTOR('',#20532,1.); +#20532 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#20533 = ORIENTED_EDGE('',*,*,#20487,.T.); +#20534 = ORIENTED_EDGE('',*,*,#19762,.F.); +#20535 = ORIENTED_EDGE('',*,*,#20443,.F.); +#20536 = PLANE('',#20537); +#20537 = AXIS2_PLACEMENT_3D('',#20538,#20539,#20540); +#20538 = CARTESIAN_POINT('',(0.22,0.32,-3.3)); +#20539 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#20540 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#20541 = ADVANCED_FACE('',(#20542),#20567,.F.); +#20542 = FACE_BOUND('',#20543,.T.); +#20543 = EDGE_LOOP('',(#20544,#20552,#20560,#20566)); +#20544 = ORIENTED_EDGE('',*,*,#20545,.F.); +#20545 = EDGE_CURVE('',#20546,#19836,#20548,.T.); +#20546 = VERTEX_POINT('',#20547); +#20547 = CARTESIAN_POINT('',(2.38,0.12,-3.4)); +#20548 = LINE('',#20549,#20550); +#20549 = CARTESIAN_POINT('',(2.353333333333,0.146666666667, + -3.373333333333)); +#20550 = VECTOR('',#20551,1.); +#20551 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#20552 = ORIENTED_EDGE('',*,*,#20553,.T.); +#20553 = EDGE_CURVE('',#20546,#20554,#20556,.T.); +#20554 = VERTEX_POINT('',#20555); +#20555 = CARTESIAN_POINT('',(2.38,-0.12,-3.4)); +#20556 = LINE('',#20557,#20558); +#20557 = CARTESIAN_POINT('',(2.38,0.32,-3.4)); +#20558 = VECTOR('',#20559,1.); +#20559 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20560 = ORIENTED_EDGE('',*,*,#20561,.T.); +#20561 = EDGE_CURVE('',#20554,#19838,#20562,.T.); +#20562 = LINE('',#20563,#20564); +#20563 = CARTESIAN_POINT('',(2.46,-4.E-02,-3.48)); +#20564 = VECTOR('',#20565,1.); +#20565 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#20566 = ORIENTED_EDGE('',*,*,#19835,.F.); +#20567 = PLANE('',#20568); +#20568 = AXIS2_PLACEMENT_3D('',#20569,#20570,#20571); +#20569 = CARTESIAN_POINT('',(2.28,0.32,-3.3)); +#20570 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#20571 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#20572 = ADVANCED_FACE('',(#20573),#20591,.T.); +#20573 = FACE_BOUND('',#20574,.F.); +#20574 = EDGE_LOOP('',(#20575,#20583,#20589,#20590)); +#20575 = ORIENTED_EDGE('',*,*,#20576,.F.); +#20576 = EDGE_CURVE('',#20577,#19867,#20579,.T.); +#20577 = VERTEX_POINT('',#20578); +#20578 = CARTESIAN_POINT('',(2.62,-0.12,-3.4)); +#20579 = LINE('',#20580,#20581); +#20580 = CARTESIAN_POINT('',(2.646666666667,-0.146666666667, + -3.373333333333)); +#20581 = VECTOR('',#20582,1.); +#20582 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#20583 = ORIENTED_EDGE('',*,*,#20584,.T.); +#20584 = EDGE_CURVE('',#20577,#20554,#20585,.T.); +#20585 = LINE('',#20586,#20587); +#20586 = CARTESIAN_POINT('',(2.82,-0.12,-3.4)); +#20587 = VECTOR('',#20588,1.); +#20588 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20589 = ORIENTED_EDGE('',*,*,#20561,.T.); +#20590 = ORIENTED_EDGE('',*,*,#19874,.F.); +#20591 = PLANE('',#20592); +#20592 = AXIS2_PLACEMENT_3D('',#20593,#20594,#20595); +#20593 = CARTESIAN_POINT('',(2.82,-0.22,-3.3)); +#20594 = DIRECTION('',(-8.486018839685E-17,-0.707106781187, + -0.707106781187)); +#20595 = DIRECTION('',(1.,-1.212375546256E-16,1.227125289196E-18)); +#20596 = ADVANCED_FACE('',(#20597),#20615,.T.); +#20597 = FACE_BOUND('',#20598,.F.); +#20598 = EDGE_LOOP('',(#20599,#20607,#20613,#20614)); +#20599 = ORIENTED_EDGE('',*,*,#20600,.F.); +#20600 = EDGE_CURVE('',#20601,#19891,#20603,.T.); +#20601 = VERTEX_POINT('',#20602); +#20602 = CARTESIAN_POINT('',(2.62,0.12,-3.4)); +#20603 = LINE('',#20604,#20605); +#20604 = CARTESIAN_POINT('',(2.753333333333,0.253333333333, + -3.266666666667)); +#20605 = VECTOR('',#20606,1.); +#20606 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#20607 = ORIENTED_EDGE('',*,*,#20608,.T.); +#20608 = EDGE_CURVE('',#20601,#20577,#20609,.T.); +#20609 = LINE('',#20610,#20611); +#20610 = CARTESIAN_POINT('',(2.62,0.32,-3.4)); +#20611 = VECTOR('',#20612,1.); +#20612 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20613 = ORIENTED_EDGE('',*,*,#20576,.T.); +#20614 = ORIENTED_EDGE('',*,*,#19890,.F.); +#20615 = PLANE('',#20616); +#20616 = AXIS2_PLACEMENT_3D('',#20617,#20618,#20619); +#20617 = CARTESIAN_POINT('',(2.72,0.32,-3.3)); +#20618 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#20619 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#20620 = ADVANCED_FACE('',(#20621),#20632,.T.); +#20621 = FACE_BOUND('',#20622,.T.); +#20622 = EDGE_LOOP('',(#20623,#20624,#20630,#20631)); +#20623 = ORIENTED_EDGE('',*,*,#20600,.F.); +#20624 = ORIENTED_EDGE('',*,*,#20625,.T.); +#20625 = EDGE_CURVE('',#20601,#20546,#20626,.T.); +#20626 = LINE('',#20627,#20628); +#20627 = CARTESIAN_POINT('',(2.82,0.12,-3.4)); +#20628 = VECTOR('',#20629,1.); +#20629 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20630 = ORIENTED_EDGE('',*,*,#20545,.T.); +#20631 = ORIENTED_EDGE('',*,*,#19917,.F.); +#20632 = PLANE('',#20633); +#20633 = AXIS2_PLACEMENT_3D('',#20634,#20635,#20636); +#20634 = CARTESIAN_POINT('',(2.82,0.22,-3.3)); +#20635 = DIRECTION('',(8.486018839685E-17,0.707106781187,-0.707106781187 + )); +#20636 = DIRECTION('',(-1.,1.212375546256E-16,1.227125289196E-18)); +#20637 = ADVANCED_FACE('',(#20638),#20679,.F.); +#20638 = FACE_BOUND('',#20639,.T.); +#20639 = EDGE_LOOP('',(#20640,#20650,#20658,#20666,#20672,#20673)); +#20640 = ORIENTED_EDGE('',*,*,#20641,.F.); +#20641 = EDGE_CURVE('',#20642,#20644,#20646,.T.); +#20642 = VERTEX_POINT('',#20643); +#20643 = CARTESIAN_POINT('',(4.88,0.12,-3.4)); +#20644 = VERTEX_POINT('',#20645); +#20645 = CARTESIAN_POINT('',(4.682447406934,0.351192514695, + -3.202447406934)); +#20646 = LINE('',#20647,#20648); +#20647 = CARTESIAN_POINT('',(4.846150901889,0.159613036666, + -3.366150901889)); +#20648 = VECTOR('',#20649,1.); +#20649 = DIRECTION('',(-0.544770019249,0.63753529491,0.544770019249)); +#20650 = ORIENTED_EDGE('',*,*,#20651,.T.); +#20651 = EDGE_CURVE('',#20642,#20652,#20654,.T.); +#20652 = VERTEX_POINT('',#20653); +#20653 = CARTESIAN_POINT('',(4.88,-0.12,-3.4)); +#20654 = LINE('',#20655,#20656); +#20655 = CARTESIAN_POINT('',(4.88,0.32,-3.4)); +#20656 = VECTOR('',#20657,1.); +#20657 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20658 = ORIENTED_EDGE('',*,*,#20659,.T.); +#20659 = EDGE_CURVE('',#20652,#20660,#20662,.T.); +#20660 = VERTEX_POINT('',#20661); +#20661 = CARTESIAN_POINT('',(4.682447406934,-0.288807485305, + -3.202447406934)); +#20662 = LINE('',#20663,#20664); +#20663 = CARTESIAN_POINT('',(4.961511443392,-5.034896900541E-02, + -3.481511443392)); +#20664 = VECTOR('',#20665,1.); +#20665 = DIRECTION('',(-0.605209817607,-0.517148096144,0.605209817607)); +#20666 = ORIENTED_EDGE('',*,*,#20667,.T.); +#20667 = EDGE_CURVE('',#20660,#19934,#20668,.T.); +#20668 = LINE('',#20669,#20670); +#20669 = CARTESIAN_POINT('',(4.914309165527,-0.325417236662, + -3.434309165527)); +#20670 = VECTOR('',#20671,1.); +#20671 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#20672 = ORIENTED_EDGE('',*,*,#19931,.F.); +#20673 = ORIENTED_EDGE('',*,*,#20674,.F.); +#20674 = EDGE_CURVE('',#20644,#19932,#20675,.T.); +#20675 = LINE('',#20676,#20677); +#20676 = CARTESIAN_POINT('',(4.458413132695,0.386566347469, + -2.978413132695)); +#20677 = VECTOR('',#20678,1.); +#20678 = DIRECTION('',(-0.702740385383,0.110959008218,0.702740385383)); +#20679 = PLANE('',#20680); +#20680 = AXIS2_PLACEMENT_3D('',#20681,#20682,#20683); +#20681 = CARTESIAN_POINT('',(4.78,0.32,-3.3)); +#20682 = DIRECTION('',(0.707106781187,-8.833102285013E-17,0.707106781187 + )); +#20683 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#20684 = ADVANCED_FACE('',(#20685),#20710,.F.); +#20685 = FACE_BOUND('',#20686,.F.); +#20686 = EDGE_LOOP('',(#20687,#20688,#20694,#20695,#20696,#20704)); +#20687 = ORIENTED_EDGE('',*,*,#20060,.F.); +#20688 = ORIENTED_EDGE('',*,*,#20689,.T.); +#20689 = EDGE_CURVE('',#20053,#19973,#20690,.T.); +#20690 = LINE('',#20691,#20692); +#20691 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#20692 = VECTOR('',#20693,1.); +#20693 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20694 = ORIENTED_EDGE('',*,*,#19980,.T.); +#20695 = ORIENTED_EDGE('',*,*,#20674,.F.); +#20696 = ORIENTED_EDGE('',*,*,#20697,.F.); +#20697 = EDGE_CURVE('',#20698,#20644,#20700,.T.); +#20698 = VERTEX_POINT('',#20699); +#20699 = CARTESIAN_POINT('',(5.317552593066,0.351192514695, + -3.202447406934)); +#20700 = LINE('',#20701,#20702); +#20701 = CARTESIAN_POINT('',(5.32,0.351192514695,-3.202447406934)); +#20702 = VECTOR('',#20703,1.); +#20703 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20704 = ORIENTED_EDGE('',*,*,#20705,.T.); +#20705 = EDGE_CURVE('',#20698,#20019,#20706,.T.); +#20706 = LINE('',#20707,#20708); +#20707 = CARTESIAN_POINT('',(5.699616963064,0.411518467852, + -2.820383036936)); +#20708 = VECTOR('',#20709,1.); +#20709 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#20710 = PLANE('',#20711); +#20711 = AXIS2_PLACEMENT_3D('',#20712,#20713,#20714); +#20712 = CARTESIAN_POINT('',(5.32,0.62,-1.5)); +#20713 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + 0.155962573473)); +#20714 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + -0.987762965329)); +#20715 = ADVANCED_FACE('',(#20716),#20722,.F.); +#20716 = FACE_BOUND('',#20717,.F.); +#20717 = EDGE_LOOP('',(#20718,#20719,#20720,#20721)); +#20718 = ORIENTED_EDGE('',*,*,#20077,.T.); +#20719 = ORIENTED_EDGE('',*,*,#19972,.T.); +#20720 = ORIENTED_EDGE('',*,*,#20689,.F.); +#20721 = ORIENTED_EDGE('',*,*,#20052,.F.); +#20722 = PLANE('',#20723); +#20723 = AXIS2_PLACEMENT_3D('',#20724,#20725,#20726); +#20724 = CARTESIAN_POINT('',(5.32,0.32,-0.9)); +#20725 = DIRECTION('',(-1.095357396528E-16,-0.894427191,-0.4472135955)); +#20726 = DIRECTION('',(5.476786982641E-17,0.4472135955,-0.894427191)); +#20727 = ADVANCED_FACE('',(#20728),#20739,.F.); +#20728 = FACE_BOUND('',#20729,.F.); +#20729 = EDGE_LOOP('',(#20730,#20736,#20737,#20738)); +#20730 = ORIENTED_EDGE('',*,*,#20731,.T.); +#20731 = EDGE_CURVE('',#20029,#19942,#20732,.T.); +#20732 = LINE('',#20733,#20734); +#20733 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#20734 = VECTOR('',#20735,1.); +#20735 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20736 = ORIENTED_EDGE('',*,*,#19949,.T.); +#20737 = ORIENTED_EDGE('',*,*,#20002,.F.); +#20738 = ORIENTED_EDGE('',*,*,#20036,.F.); +#20739 = PLANE('',#20740); +#20740 = AXIS2_PLACEMENT_3D('',#20741,#20742,#20743); +#20741 = CARTESIAN_POINT('',(5.32,-2.E-02,-1.5)); +#20742 = DIRECTION('',(1.095357396528E-16,0.894427191,0.4472135955)); +#20743 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,0.894427191)); +#20744 = ADVANCED_FACE('',(#20745),#20765,.F.); +#20745 = FACE_BOUND('',#20746,.F.); +#20746 = EDGE_LOOP('',(#20747,#20748,#20756,#20762,#20763,#20764)); +#20747 = ORIENTED_EDGE('',*,*,#20028,.F.); +#20748 = ORIENTED_EDGE('',*,*,#20749,.F.); +#20749 = EDGE_CURVE('',#20750,#20021,#20752,.T.); +#20750 = VERTEX_POINT('',#20751); +#20751 = CARTESIAN_POINT('',(5.317552593066,-0.288807485305, + -3.202447406934)); +#20752 = LINE('',#20753,#20754); +#20753 = CARTESIAN_POINT('',(5.243720930233,-0.300465116279, + -3.276279069767)); +#20754 = VECTOR('',#20755,1.); +#20755 = DIRECTION('',(0.702740385383,0.110959008218,0.702740385383)); +#20756 = ORIENTED_EDGE('',*,*,#20757,.T.); +#20757 = EDGE_CURVE('',#20750,#20660,#20758,.T.); +#20758 = LINE('',#20759,#20760); +#20759 = CARTESIAN_POINT('',(5.32,-0.288807485305,-3.202447406934)); +#20760 = VECTOR('',#20761,1.); +#20761 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20762 = ORIENTED_EDGE('',*,*,#20667,.T.); +#20763 = ORIENTED_EDGE('',*,*,#19941,.T.); +#20764 = ORIENTED_EDGE('',*,*,#20731,.F.); +#20765 = PLANE('',#20766); +#20766 = AXIS2_PLACEMENT_3D('',#20767,#20768,#20769); +#20767 = CARTESIAN_POINT('',(5.32,-0.32,-3.4)); +#20768 = DIRECTION('',(1.209660753807E-16,0.987762965329,-0.155962573473 + )); +#20769 = DIRECTION('',(1.909990663905E-17,0.155962573473,0.987762965329) + ); +#20770 = ADVANCED_FACE('',(#20771),#20798,.T.); +#20771 = FACE_BOUND('',#20772,.F.); +#20772 = EDGE_LOOP('',(#20773,#20781,#20789,#20795,#20796,#20797)); +#20773 = ORIENTED_EDGE('',*,*,#20774,.F.); +#20774 = EDGE_CURVE('',#20775,#20698,#20777,.T.); +#20775 = VERTEX_POINT('',#20776); +#20776 = CARTESIAN_POINT('',(5.12,0.12,-3.4)); +#20777 = LINE('',#20778,#20779); +#20778 = CARTESIAN_POINT('',(5.24881689775,0.270752273427,-3.27118310225 + )); +#20779 = VECTOR('',#20780,1.); +#20780 = DIRECTION('',(0.544770019249,0.63753529491,0.544770019249)); +#20781 = ORIENTED_EDGE('',*,*,#20782,.T.); +#20782 = EDGE_CURVE('',#20775,#20783,#20785,.T.); +#20783 = VERTEX_POINT('',#20784); +#20784 = CARTESIAN_POINT('',(5.12,-0.12,-3.4)); +#20785 = LINE('',#20786,#20787); +#20786 = CARTESIAN_POINT('',(5.12,0.32,-3.4)); +#20787 = VECTOR('',#20788,1.); +#20788 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20789 = ORIENTED_EDGE('',*,*,#20790,.T.); +#20790 = EDGE_CURVE('',#20783,#20750,#20791,.T.); +#20791 = LINE('',#20792,#20793); +#20792 = CARTESIAN_POINT('',(5.155697812072,-0.150503562587, + -3.364302187928)); +#20793 = VECTOR('',#20794,1.); +#20794 = DIRECTION('',(0.605209817607,-0.517148096144,0.605209817607)); +#20795 = ORIENTED_EDGE('',*,*,#20749,.T.); +#20796 = ORIENTED_EDGE('',*,*,#20018,.F.); +#20797 = ORIENTED_EDGE('',*,*,#20705,.F.); +#20798 = PLANE('',#20799); +#20799 = AXIS2_PLACEMENT_3D('',#20800,#20801,#20802); +#20800 = CARTESIAN_POINT('',(5.22,0.32,-3.3)); +#20801 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#20802 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#20803 = ADVANCED_FACE('',(#20804),#20810,.F.); +#20804 = FACE_BOUND('',#20805,.F.); +#20805 = EDGE_LOOP('',(#20806,#20807,#20808,#20809)); +#20806 = ORIENTED_EDGE('',*,*,#20099,.T.); +#20807 = ORIENTED_EDGE('',*,*,#20171,.F.); +#20808 = ORIENTED_EDGE('',*,*,#20147,.F.); +#20809 = ORIENTED_EDGE('',*,*,#20132,.T.); +#20810 = PLANE('',#20811); +#20811 = AXIS2_PLACEMENT_3D('',#20812,#20813,#20814); +#20812 = CARTESIAN_POINT('',(0.32,-0.32,6.5)); +#20813 = DIRECTION('',(-0.,0.,-1.)); +#20814 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20815 = ADVANCED_FACE('',(#20816),#20822,.F.); +#20816 = FACE_BOUND('',#20817,.F.); +#20817 = EDGE_LOOP('',(#20818,#20819,#20820,#20821)); +#20818 = ORIENTED_EDGE('',*,*,#20195,.T.); +#20819 = ORIENTED_EDGE('',*,*,#20267,.F.); +#20820 = ORIENTED_EDGE('',*,*,#20243,.F.); +#20821 = ORIENTED_EDGE('',*,*,#20228,.T.); +#20822 = PLANE('',#20823); +#20823 = AXIS2_PLACEMENT_3D('',#20824,#20825,#20826); +#20824 = CARTESIAN_POINT('',(5.32,-0.32,6.5)); +#20825 = DIRECTION('',(-0.,0.,-1.)); +#20826 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20827 = ADVANCED_FACE('',(#20828),#20834,.F.); +#20828 = FACE_BOUND('',#20829,.F.); +#20829 = EDGE_LOOP('',(#20830,#20831,#20832,#20833)); +#20830 = ORIENTED_EDGE('',*,*,#20363,.F.); +#20831 = ORIENTED_EDGE('',*,*,#20339,.F.); +#20832 = ORIENTED_EDGE('',*,*,#20324,.T.); +#20833 = ORIENTED_EDGE('',*,*,#20291,.T.); +#20834 = PLANE('',#20835); +#20835 = AXIS2_PLACEMENT_3D('',#20836,#20837,#20838); +#20836 = CARTESIAN_POINT('',(2.82,-0.32,6.5)); +#20837 = DIRECTION('',(-0.,0.,-1.)); +#20838 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#20839 = ADVANCED_FACE('',(#20840),#20851,.T.); +#20840 = FACE_BOUND('',#20841,.T.); +#20841 = EDGE_LOOP('',(#20842,#20843,#20849,#20850)); +#20842 = ORIENTED_EDGE('',*,*,#20512,.F.); +#20843 = ORIENTED_EDGE('',*,*,#20844,.T.); +#20844 = EDGE_CURVE('',#20513,#20380,#20845,.T.); +#20845 = LINE('',#20846,#20847); +#20846 = CARTESIAN_POINT('',(0.32,0.12,-3.4)); +#20847 = VECTOR('',#20848,1.); +#20848 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20849 = ORIENTED_EDGE('',*,*,#20379,.T.); +#20850 = ORIENTED_EDGE('',*,*,#20435,.F.); +#20851 = PLANE('',#20852); +#20852 = AXIS2_PLACEMENT_3D('',#20853,#20854,#20855); +#20853 = CARTESIAN_POINT('',(0.32,0.235596257347,-3.301223703467)); +#20854 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#20855 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#20856 = ADVANCED_FACE('',(#20857),#20868,.F.); +#20857 = FACE_BOUND('',#20858,.F.); +#20858 = EDGE_LOOP('',(#20859,#20860,#20861,#20867)); +#20859 = ORIENTED_EDGE('',*,*,#20844,.T.); +#20860 = ORIENTED_EDGE('',*,*,#20389,.T.); +#20861 = ORIENTED_EDGE('',*,*,#20862,.F.); +#20862 = EDGE_CURVE('',#20521,#20390,#20863,.T.); +#20863 = LINE('',#20864,#20865); +#20864 = CARTESIAN_POINT('',(0.32,-0.12,-3.4)); +#20865 = VECTOR('',#20866,1.); +#20866 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20867 = ORIENTED_EDGE('',*,*,#20520,.F.); +#20868 = PLANE('',#20869); +#20869 = AXIS2_PLACEMENT_3D('',#20870,#20871,#20872); +#20870 = CARTESIAN_POINT('',(0.32,0.32,-3.4)); +#20871 = DIRECTION('',(0.,0.,1.)); +#20872 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20873 = ADVANCED_FACE('',(#20874),#20880,.T.); +#20874 = FACE_BOUND('',#20875,.F.); +#20875 = EDGE_LOOP('',(#20876,#20877,#20878,#20879)); +#20876 = ORIENTED_EDGE('',*,*,#20528,.F.); +#20877 = ORIENTED_EDGE('',*,*,#20862,.T.); +#20878 = ORIENTED_EDGE('',*,*,#20397,.T.); +#20879 = ORIENTED_EDGE('',*,*,#20495,.F.); +#20880 = PLANE('',#20881); +#20881 = AXIS2_PLACEMENT_3D('',#20882,#20883,#20884); +#20882 = CARTESIAN_POINT('',(0.32,-0.204403742653,-3.301223703467)); +#20883 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#20884 = DIRECTION('',(1.,-1.224646799148E-16,-5.515863360725E-29)); +#20885 = ADVANCED_FACE('',(#20886),#20892,.F.); +#20886 = FACE_BOUND('',#20887,.F.); +#20887 = EDGE_LOOP('',(#20888,#20889,#20890,#20891)); +#20888 = ORIENTED_EDGE('',*,*,#20608,.F.); +#20889 = ORIENTED_EDGE('',*,*,#20625,.T.); +#20890 = ORIENTED_EDGE('',*,*,#20553,.T.); +#20891 = ORIENTED_EDGE('',*,*,#20584,.F.); +#20892 = PLANE('',#20893); +#20893 = AXIS2_PLACEMENT_3D('',#20894,#20895,#20896); +#20894 = CARTESIAN_POINT('',(2.82,0.32,-3.4)); +#20895 = DIRECTION('',(0.,0.,1.)); +#20896 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20897 = ADVANCED_FACE('',(#20898),#20909,.T.); +#20898 = FACE_BOUND('',#20899,.T.); +#20899 = EDGE_LOOP('',(#20900,#20901,#20907,#20908)); +#20900 = ORIENTED_EDGE('',*,*,#20774,.F.); +#20901 = ORIENTED_EDGE('',*,*,#20902,.T.); +#20902 = EDGE_CURVE('',#20775,#20642,#20903,.T.); +#20903 = LINE('',#20904,#20905); +#20904 = CARTESIAN_POINT('',(5.32,0.12,-3.4)); +#20905 = VECTOR('',#20906,1.); +#20906 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20907 = ORIENTED_EDGE('',*,*,#20641,.T.); +#20908 = ORIENTED_EDGE('',*,*,#20697,.F.); +#20909 = PLANE('',#20910); +#20910 = AXIS2_PLACEMENT_3D('',#20911,#20912,#20913); +#20911 = CARTESIAN_POINT('',(5.32,0.235596257347,-3.301223703467)); +#20912 = DIRECTION('',(8.302774088379E-17,0.64962967394,-0.760250805153) + ); +#20913 = DIRECTION('',(-1.,1.247195775152E-16,-2.638869166629E-18)); +#20914 = ADVANCED_FACE('',(#20915),#20926,.F.); +#20915 = FACE_BOUND('',#20916,.F.); +#20916 = EDGE_LOOP('',(#20917,#20918,#20919,#20925)); +#20917 = ORIENTED_EDGE('',*,*,#20902,.T.); +#20918 = ORIENTED_EDGE('',*,*,#20651,.T.); +#20919 = ORIENTED_EDGE('',*,*,#20920,.F.); +#20920 = EDGE_CURVE('',#20783,#20652,#20921,.T.); +#20921 = LINE('',#20922,#20923); +#20922 = CARTESIAN_POINT('',(5.32,-0.12,-3.4)); +#20923 = VECTOR('',#20924,1.); +#20924 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#20925 = ORIENTED_EDGE('',*,*,#20782,.F.); +#20926 = PLANE('',#20927); +#20927 = AXIS2_PLACEMENT_3D('',#20928,#20929,#20930); +#20928 = CARTESIAN_POINT('',(5.32,0.32,-3.4)); +#20929 = DIRECTION('',(0.,0.,1.)); +#20930 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#20931 = ADVANCED_FACE('',(#20932),#20938,.T.); +#20932 = FACE_BOUND('',#20933,.F.); +#20933 = EDGE_LOOP('',(#20934,#20935,#20936,#20937)); +#20934 = ORIENTED_EDGE('',*,*,#20790,.F.); +#20935 = ORIENTED_EDGE('',*,*,#20920,.T.); +#20936 = ORIENTED_EDGE('',*,*,#20659,.T.); +#20937 = ORIENTED_EDGE('',*,*,#20757,.F.); +#20938 = PLANE('',#20939); +#20939 = AXIS2_PLACEMENT_3D('',#20940,#20941,#20942); +#20940 = CARTESIAN_POINT('',(5.32,-0.204403742653,-3.301223703467)); +#20941 = DIRECTION('',(-9.310387150808E-17,-0.760250805153, + -0.64962967394)); +#20942 = DIRECTION('',(1.,-1.224646799148E-16,-5.515863360725E-29)); +#20943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#20947)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#20944,#20945,#20946)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#20944 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#20945 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#20946 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#20947 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#20944, + 'distance_accuracy_value','confusion accuracy'); +#20948 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20949,#20951); +#20949 = ( REPRESENTATION_RELATIONSHIP('','',#17421,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20950) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20950 = ITEM_DEFINED_TRANSFORMATION('','',#11,#115); +#20951 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20952); +#20952 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('26','J5','',#5,#17416,$); +#20953 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#17418)); +#20954 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20955,#20957); +#20955 = ( REPRESENTATION_RELATIONSHIP('','',#17421,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20956) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20956 = ITEM_DEFINED_TRANSFORMATION('','',#11,#119); +#20957 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20958); +#20958 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('27','J6','',#5,#17416,$); +#20959 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20960,#20962); +#20960 = ( REPRESENTATION_RELATIONSHIP('','',#17421,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20961) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20961 = ITEM_DEFINED_TRANSFORMATION('','',#11,#123); +#20962 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20963); +#20963 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('28','J7','',#5,#17416,$); +#20964 = SHAPE_DEFINITION_REPRESENTATION(#20965,#20971); +#20965 = PRODUCT_DEFINITION_SHAPE('','',#20966); +#20966 = PRODUCT_DEFINITION('design','',#20967,#20970); +#20967 = PRODUCT_DEFINITION_FORMATION('','',#20968); +#20968 = PRODUCT('PinHeader_1x04_P2.54mm_Vertical', + 'PinHeader_1x04_P2.54mm_Vertical','',(#20969)); +#20969 = PRODUCT_CONTEXT('',#2,'mechanical'); +#20970 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#20971 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#20972),#23752); +#20972 = MANIFOLD_SOLID_BREP('',#20973); +#20973 = CLOSED_SHELL('',(#20974,#21014,#21045,#21076,#21405,#21734, + #21751,#21768,#21785,#21802,#21819,#21836,#21853,#21870,#21887, + #21904,#21921,#21938,#21955,#21972,#21989,#22006,#22023,#22040, + #22057,#22074,#22091,#22108,#22120,#22151,#22175,#22199,#22216, + #22247,#22271,#22295,#22312,#22343,#22367,#22391,#22408,#22439, + #22463,#22487,#22504,#22535,#22559,#22583,#22600,#22631,#22655, + #22679,#22696,#22727,#22751,#22775,#22792,#22823,#22847,#22871, + #22888,#22919,#22943,#22967,#22984,#23015,#23039,#23063,#23080, + #23111,#23135,#23159,#23176,#23207,#23231,#23255,#23272,#23303, + #23327,#23351,#23368,#23399,#23423,#23447,#23464,#23495,#23519, + #23543,#23560,#23591,#23615,#23639,#23656,#23668,#23680,#23692, + #23704,#23716,#23728,#23740)); +#20974 = ADVANCED_FACE('',(#20975),#21009,.F.); +#20975 = FACE_BOUND('',#20976,.F.); +#20976 = EDGE_LOOP('',(#20977,#20987,#20995,#21003)); +#20977 = ORIENTED_EDGE('',*,*,#20978,.T.); +#20978 = EDGE_CURVE('',#20979,#20981,#20983,.T.); +#20979 = VERTEX_POINT('',#20980); +#20980 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#20981 = VERTEX_POINT('',#20982); +#20982 = CARTESIAN_POINT('',(-1.016,1.27,2.54)); +#20983 = LINE('',#20984,#20985); +#20984 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#20985 = VECTOR('',#20986,1.); +#20986 = DIRECTION('',(0.,0.,1.)); +#20987 = ORIENTED_EDGE('',*,*,#20988,.T.); +#20988 = EDGE_CURVE('',#20981,#20989,#20991,.T.); +#20989 = VERTEX_POINT('',#20990); +#20990 = CARTESIAN_POINT('',(-1.27,1.016,2.54)); +#20991 = LINE('',#20992,#20993); +#20992 = CARTESIAN_POINT('',(-1.016,1.27,2.54)); +#20993 = VECTOR('',#20994,1.); +#20994 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#20995 = ORIENTED_EDGE('',*,*,#20996,.F.); +#20996 = EDGE_CURVE('',#20997,#20989,#20999,.T.); +#20997 = VERTEX_POINT('',#20998); +#20998 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#20999 = LINE('',#21000,#21001); +#21000 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#21001 = VECTOR('',#21002,1.); +#21002 = DIRECTION('',(0.,0.,1.)); +#21003 = ORIENTED_EDGE('',*,*,#21004,.F.); +#21004 = EDGE_CURVE('',#20979,#20997,#21005,.T.); +#21005 = LINE('',#21006,#21007); +#21006 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#21007 = VECTOR('',#21008,1.); +#21008 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21009 = PLANE('',#21010); +#21010 = AXIS2_PLACEMENT_3D('',#21011,#21012,#21013); +#21011 = CARTESIAN_POINT('',(-1.016,1.27,0.)); +#21012 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21013 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21014 = ADVANCED_FACE('',(#21015),#21040,.F.); +#21015 = FACE_BOUND('',#21016,.F.); +#21016 = EDGE_LOOP('',(#21017,#21027,#21033,#21034)); +#21017 = ORIENTED_EDGE('',*,*,#21018,.T.); +#21018 = EDGE_CURVE('',#21019,#21021,#21023,.T.); +#21019 = VERTEX_POINT('',#21020); +#21020 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#21021 = VERTEX_POINT('',#21022); +#21022 = CARTESIAN_POINT('',(1.016,1.27,2.54)); +#21023 = LINE('',#21024,#21025); +#21024 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#21025 = VECTOR('',#21026,1.); +#21026 = DIRECTION('',(0.,0.,1.)); +#21027 = ORIENTED_EDGE('',*,*,#21028,.T.); +#21028 = EDGE_CURVE('',#21021,#20981,#21029,.T.); +#21029 = LINE('',#21030,#21031); +#21030 = CARTESIAN_POINT('',(1.016,1.27,2.54)); +#21031 = VECTOR('',#21032,1.); +#21032 = DIRECTION('',(-1.,0.,0.)); +#21033 = ORIENTED_EDGE('',*,*,#20978,.F.); +#21034 = ORIENTED_EDGE('',*,*,#21035,.F.); +#21035 = EDGE_CURVE('',#21019,#20979,#21036,.T.); +#21036 = LINE('',#21037,#21038); +#21037 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#21038 = VECTOR('',#21039,1.); +#21039 = DIRECTION('',(-1.,0.,0.)); +#21040 = PLANE('',#21041); +#21041 = AXIS2_PLACEMENT_3D('',#21042,#21043,#21044); +#21042 = CARTESIAN_POINT('',(1.016,1.27,0.)); +#21043 = DIRECTION('',(0.,-1.,0.)); +#21044 = DIRECTION('',(-1.,0.,0.)); +#21045 = ADVANCED_FACE('',(#21046),#21071,.F.); +#21046 = FACE_BOUND('',#21047,.F.); +#21047 = EDGE_LOOP('',(#21048,#21049,#21057,#21065)); +#21048 = ORIENTED_EDGE('',*,*,#20996,.T.); +#21049 = ORIENTED_EDGE('',*,*,#21050,.T.); +#21050 = EDGE_CURVE('',#20989,#21051,#21053,.T.); +#21051 = VERTEX_POINT('',#21052); +#21052 = CARTESIAN_POINT('',(-1.27,-1.016,2.54)); +#21053 = LINE('',#21054,#21055); +#21054 = CARTESIAN_POINT('',(-1.27,1.016,2.54)); +#21055 = VECTOR('',#21056,1.); +#21056 = DIRECTION('',(0.,-1.,0.)); +#21057 = ORIENTED_EDGE('',*,*,#21058,.F.); +#21058 = EDGE_CURVE('',#21059,#21051,#21061,.T.); +#21059 = VERTEX_POINT('',#21060); +#21060 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#21061 = LINE('',#21062,#21063); +#21062 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#21063 = VECTOR('',#21064,1.); +#21064 = DIRECTION('',(0.,0.,1.)); +#21065 = ORIENTED_EDGE('',*,*,#21066,.F.); +#21066 = EDGE_CURVE('',#20997,#21059,#21067,.T.); +#21067 = LINE('',#21068,#21069); +#21068 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#21069 = VECTOR('',#21070,1.); +#21070 = DIRECTION('',(0.,-1.,0.)); +#21071 = PLANE('',#21072); +#21072 = AXIS2_PLACEMENT_3D('',#21073,#21074,#21075); +#21073 = CARTESIAN_POINT('',(-1.27,1.016,0.)); +#21074 = DIRECTION('',(1.,0.,0.)); +#21075 = DIRECTION('',(0.,-1.,0.)); +#21076 = ADVANCED_FACE('',(#21077,#21264,#21298,#21332,#21366),#21400, + .F.); +#21077 = FACE_BOUND('',#21078,.F.); +#21078 = EDGE_LOOP('',(#21079,#21080,#21081,#21089,#21097,#21105,#21113, + #21121,#21129,#21137,#21145,#21153,#21161,#21169,#21177,#21185, + #21193,#21201,#21209,#21217,#21225,#21233,#21241,#21249,#21257, + #21263)); +#21079 = ORIENTED_EDGE('',*,*,#21004,.T.); +#21080 = ORIENTED_EDGE('',*,*,#21066,.T.); +#21081 = ORIENTED_EDGE('',*,*,#21082,.T.); +#21082 = EDGE_CURVE('',#21059,#21083,#21085,.T.); +#21083 = VERTEX_POINT('',#21084); +#21084 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#21085 = LINE('',#21086,#21087); +#21086 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#21087 = VECTOR('',#21088,1.); +#21088 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21089 = ORIENTED_EDGE('',*,*,#21090,.T.); +#21090 = EDGE_CURVE('',#21083,#21091,#21093,.T.); +#21091 = VERTEX_POINT('',#21092); +#21092 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#21093 = LINE('',#21094,#21095); +#21094 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#21095 = VECTOR('',#21096,1.); +#21096 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21097 = ORIENTED_EDGE('',*,*,#21098,.T.); +#21098 = EDGE_CURVE('',#21091,#21099,#21101,.T.); +#21099 = VERTEX_POINT('',#21100); +#21100 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#21101 = LINE('',#21102,#21103); +#21102 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#21103 = VECTOR('',#21104,1.); +#21104 = DIRECTION('',(0.,-1.,0.)); +#21105 = ORIENTED_EDGE('',*,*,#21106,.T.); +#21106 = EDGE_CURVE('',#21099,#21107,#21109,.T.); +#21107 = VERTEX_POINT('',#21108); +#21108 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#21109 = LINE('',#21110,#21111); +#21110 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#21111 = VECTOR('',#21112,1.); +#21112 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21113 = ORIENTED_EDGE('',*,*,#21114,.T.); +#21114 = EDGE_CURVE('',#21107,#21115,#21117,.T.); +#21115 = VERTEX_POINT('',#21116); +#21116 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#21117 = LINE('',#21118,#21119); +#21118 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#21119 = VECTOR('',#21120,1.); +#21120 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21121 = ORIENTED_EDGE('',*,*,#21122,.T.); +#21122 = EDGE_CURVE('',#21115,#21123,#21125,.T.); +#21123 = VERTEX_POINT('',#21124); +#21124 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#21125 = LINE('',#21126,#21127); +#21126 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#21127 = VECTOR('',#21128,1.); +#21128 = DIRECTION('',(0.,-1.,0.)); +#21129 = ORIENTED_EDGE('',*,*,#21130,.T.); +#21130 = EDGE_CURVE('',#21123,#21131,#21133,.T.); +#21131 = VERTEX_POINT('',#21132); +#21132 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#21133 = LINE('',#21134,#21135); +#21134 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#21135 = VECTOR('',#21136,1.); +#21136 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21137 = ORIENTED_EDGE('',*,*,#21138,.T.); +#21138 = EDGE_CURVE('',#21131,#21139,#21141,.T.); +#21139 = VERTEX_POINT('',#21140); +#21140 = CARTESIAN_POINT('',(-1.27,-6.604,0.)); +#21141 = LINE('',#21142,#21143); +#21142 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#21143 = VECTOR('',#21144,1.); +#21144 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21145 = ORIENTED_EDGE('',*,*,#21146,.T.); +#21146 = EDGE_CURVE('',#21139,#21147,#21149,.T.); +#21147 = VERTEX_POINT('',#21148); +#21148 = CARTESIAN_POINT('',(-1.27,-8.636,0.)); +#21149 = LINE('',#21150,#21151); +#21150 = CARTESIAN_POINT('',(-1.27,-6.604,0.)); +#21151 = VECTOR('',#21152,1.); +#21152 = DIRECTION('',(0.,-1.,0.)); +#21153 = ORIENTED_EDGE('',*,*,#21154,.T.); +#21154 = EDGE_CURVE('',#21147,#21155,#21157,.T.); +#21155 = VERTEX_POINT('',#21156); +#21156 = CARTESIAN_POINT('',(-1.016,-8.89,0.)); +#21157 = LINE('',#21158,#21159); +#21158 = CARTESIAN_POINT('',(-1.27,-8.636,0.)); +#21159 = VECTOR('',#21160,1.); +#21160 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21161 = ORIENTED_EDGE('',*,*,#21162,.T.); +#21162 = EDGE_CURVE('',#21155,#21163,#21165,.T.); +#21163 = VERTEX_POINT('',#21164); +#21164 = CARTESIAN_POINT('',(1.016,-8.89,0.)); +#21165 = LINE('',#21166,#21167); +#21166 = CARTESIAN_POINT('',(-1.016,-8.89,0.)); +#21167 = VECTOR('',#21168,1.); +#21168 = DIRECTION('',(1.,0.,0.)); +#21169 = ORIENTED_EDGE('',*,*,#21170,.T.); +#21170 = EDGE_CURVE('',#21163,#21171,#21173,.T.); +#21171 = VERTEX_POINT('',#21172); +#21172 = CARTESIAN_POINT('',(1.27,-8.636,0.)); +#21173 = LINE('',#21174,#21175); +#21174 = CARTESIAN_POINT('',(1.016,-8.89,0.)); +#21175 = VECTOR('',#21176,1.); +#21176 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21177 = ORIENTED_EDGE('',*,*,#21178,.T.); +#21178 = EDGE_CURVE('',#21171,#21179,#21181,.T.); +#21179 = VERTEX_POINT('',#21180); +#21180 = CARTESIAN_POINT('',(1.27,-6.604,0.)); +#21181 = LINE('',#21182,#21183); +#21182 = CARTESIAN_POINT('',(1.27,-8.636,0.)); +#21183 = VECTOR('',#21184,1.); +#21184 = DIRECTION('',(0.,1.,0.)); +#21185 = ORIENTED_EDGE('',*,*,#21186,.T.); +#21186 = EDGE_CURVE('',#21179,#21187,#21189,.T.); +#21187 = VERTEX_POINT('',#21188); +#21188 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#21189 = LINE('',#21190,#21191); +#21190 = CARTESIAN_POINT('',(1.27,-6.604,0.)); +#21191 = VECTOR('',#21192,1.); +#21192 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21193 = ORIENTED_EDGE('',*,*,#21194,.T.); +#21194 = EDGE_CURVE('',#21187,#21195,#21197,.T.); +#21195 = VERTEX_POINT('',#21196); +#21196 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#21197 = LINE('',#21198,#21199); +#21198 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#21199 = VECTOR('',#21200,1.); +#21200 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21201 = ORIENTED_EDGE('',*,*,#21202,.T.); +#21202 = EDGE_CURVE('',#21195,#21203,#21205,.T.); +#21203 = VERTEX_POINT('',#21204); +#21204 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#21205 = LINE('',#21206,#21207); +#21206 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#21207 = VECTOR('',#21208,1.); +#21208 = DIRECTION('',(0.,1.,0.)); +#21209 = ORIENTED_EDGE('',*,*,#21210,.T.); +#21210 = EDGE_CURVE('',#21203,#21211,#21213,.T.); +#21211 = VERTEX_POINT('',#21212); +#21212 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#21213 = LINE('',#21214,#21215); +#21214 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#21215 = VECTOR('',#21216,1.); +#21216 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21217 = ORIENTED_EDGE('',*,*,#21218,.T.); +#21218 = EDGE_CURVE('',#21211,#21219,#21221,.T.); +#21219 = VERTEX_POINT('',#21220); +#21220 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#21221 = LINE('',#21222,#21223); +#21222 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#21223 = VECTOR('',#21224,1.); +#21224 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21225 = ORIENTED_EDGE('',*,*,#21226,.T.); +#21226 = EDGE_CURVE('',#21219,#21227,#21229,.T.); +#21227 = VERTEX_POINT('',#21228); +#21228 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#21229 = LINE('',#21230,#21231); +#21230 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#21231 = VECTOR('',#21232,1.); +#21232 = DIRECTION('',(0.,1.,0.)); +#21233 = ORIENTED_EDGE('',*,*,#21234,.T.); +#21234 = EDGE_CURVE('',#21227,#21235,#21237,.T.); +#21235 = VERTEX_POINT('',#21236); +#21236 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#21237 = LINE('',#21238,#21239); +#21238 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#21239 = VECTOR('',#21240,1.); +#21240 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21241 = ORIENTED_EDGE('',*,*,#21242,.T.); +#21242 = EDGE_CURVE('',#21235,#21243,#21245,.T.); +#21243 = VERTEX_POINT('',#21244); +#21244 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#21245 = LINE('',#21246,#21247); +#21246 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#21247 = VECTOR('',#21248,1.); +#21248 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21249 = ORIENTED_EDGE('',*,*,#21250,.T.); +#21250 = EDGE_CURVE('',#21243,#21251,#21253,.T.); +#21251 = VERTEX_POINT('',#21252); +#21252 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#21253 = LINE('',#21254,#21255); +#21254 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#21255 = VECTOR('',#21256,1.); +#21256 = DIRECTION('',(0.,1.,0.)); +#21257 = ORIENTED_EDGE('',*,*,#21258,.T.); +#21258 = EDGE_CURVE('',#21251,#21019,#21259,.T.); +#21259 = LINE('',#21260,#21261); +#21260 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#21261 = VECTOR('',#21262,1.); +#21262 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21263 = ORIENTED_EDGE('',*,*,#21035,.T.); +#21264 = FACE_BOUND('',#21265,.F.); +#21265 = EDGE_LOOP('',(#21266,#21276,#21284,#21292)); +#21266 = ORIENTED_EDGE('',*,*,#21267,.F.); +#21267 = EDGE_CURVE('',#21268,#21270,#21272,.T.); +#21268 = VERTEX_POINT('',#21269); +#21269 = CARTESIAN_POINT('',(0.32,-4.76,0.)); +#21270 = VERTEX_POINT('',#21271); +#21271 = CARTESIAN_POINT('',(-0.32,-4.76,0.)); +#21272 = LINE('',#21273,#21274); +#21273 = CARTESIAN_POINT('',(-0.16,-4.76,0.)); +#21274 = VECTOR('',#21275,1.); +#21275 = DIRECTION('',(-1.,0.,0.)); +#21276 = ORIENTED_EDGE('',*,*,#21277,.F.); +#21277 = EDGE_CURVE('',#21278,#21268,#21280,.T.); +#21278 = VERTEX_POINT('',#21279); +#21279 = CARTESIAN_POINT('',(0.32,-5.4,0.)); +#21280 = LINE('',#21281,#21282); +#21281 = CARTESIAN_POINT('',(0.32,-4.605,0.)); +#21282 = VECTOR('',#21283,1.); +#21283 = DIRECTION('',(0.,1.,0.)); +#21284 = ORIENTED_EDGE('',*,*,#21285,.T.); +#21285 = EDGE_CURVE('',#21278,#21286,#21288,.T.); +#21286 = VERTEX_POINT('',#21287); +#21287 = CARTESIAN_POINT('',(-0.32,-5.4,0.)); +#21288 = LINE('',#21289,#21290); +#21289 = CARTESIAN_POINT('',(-0.16,-5.4,0.)); +#21290 = VECTOR('',#21291,1.); +#21291 = DIRECTION('',(-1.,0.,0.)); +#21292 = ORIENTED_EDGE('',*,*,#21293,.T.); +#21293 = EDGE_CURVE('',#21286,#21270,#21294,.T.); +#21294 = LINE('',#21295,#21296); +#21295 = CARTESIAN_POINT('',(-0.32,-4.605,0.)); +#21296 = VECTOR('',#21297,1.); +#21297 = DIRECTION('',(0.,1.,0.)); +#21298 = FACE_BOUND('',#21299,.F.); +#21299 = EDGE_LOOP('',(#21300,#21310,#21318,#21326)); +#21300 = ORIENTED_EDGE('',*,*,#21301,.F.); +#21301 = EDGE_CURVE('',#21302,#21304,#21306,.T.); +#21302 = VERTEX_POINT('',#21303); +#21303 = CARTESIAN_POINT('',(0.32,-7.94,0.)); +#21304 = VERTEX_POINT('',#21305); +#21305 = CARTESIAN_POINT('',(0.32,-7.3,0.)); +#21306 = LINE('',#21307,#21308); +#21307 = CARTESIAN_POINT('',(0.32,-5.875,0.)); +#21308 = VECTOR('',#21309,1.); +#21309 = DIRECTION('',(0.,1.,0.)); +#21310 = ORIENTED_EDGE('',*,*,#21311,.T.); +#21311 = EDGE_CURVE('',#21302,#21312,#21314,.T.); +#21312 = VERTEX_POINT('',#21313); +#21313 = CARTESIAN_POINT('',(-0.32,-7.94,0.)); +#21314 = LINE('',#21315,#21316); +#21315 = CARTESIAN_POINT('',(-0.16,-7.94,0.)); +#21316 = VECTOR('',#21317,1.); +#21317 = DIRECTION('',(-1.,0.,0.)); +#21318 = ORIENTED_EDGE('',*,*,#21319,.T.); +#21319 = EDGE_CURVE('',#21312,#21320,#21322,.T.); +#21320 = VERTEX_POINT('',#21321); +#21321 = CARTESIAN_POINT('',(-0.32,-7.3,0.)); +#21322 = LINE('',#21323,#21324); +#21323 = CARTESIAN_POINT('',(-0.32,-5.875,0.)); +#21324 = VECTOR('',#21325,1.); +#21325 = DIRECTION('',(0.,1.,0.)); +#21326 = ORIENTED_EDGE('',*,*,#21327,.F.); +#21327 = EDGE_CURVE('',#21304,#21320,#21328,.T.); +#21328 = LINE('',#21329,#21330); +#21329 = CARTESIAN_POINT('',(-0.16,-7.3,0.)); +#21330 = VECTOR('',#21331,1.); +#21331 = DIRECTION('',(-1.,0.,0.)); +#21332 = FACE_BOUND('',#21333,.F.); +#21333 = EDGE_LOOP('',(#21334,#21344,#21352,#21360)); +#21334 = ORIENTED_EDGE('',*,*,#21335,.F.); +#21335 = EDGE_CURVE('',#21336,#21338,#21340,.T.); +#21336 = VERTEX_POINT('',#21337); +#21337 = CARTESIAN_POINT('',(0.32,-0.32,0.)); +#21338 = VERTEX_POINT('',#21339); +#21339 = CARTESIAN_POINT('',(0.32,0.32,0.)); +#21340 = LINE('',#21341,#21342); +#21341 = CARTESIAN_POINT('',(0.32,-2.065,0.)); +#21342 = VECTOR('',#21343,1.); +#21343 = DIRECTION('',(0.,1.,0.)); +#21344 = ORIENTED_EDGE('',*,*,#21345,.T.); +#21345 = EDGE_CURVE('',#21336,#21346,#21348,.T.); +#21346 = VERTEX_POINT('',#21347); +#21347 = CARTESIAN_POINT('',(-0.32,-0.32,0.)); +#21348 = LINE('',#21349,#21350); +#21349 = CARTESIAN_POINT('',(-0.16,-0.32,0.)); +#21350 = VECTOR('',#21351,1.); +#21351 = DIRECTION('',(-1.,0.,0.)); +#21352 = ORIENTED_EDGE('',*,*,#21353,.T.); +#21353 = EDGE_CURVE('',#21346,#21354,#21356,.T.); +#21354 = VERTEX_POINT('',#21355); +#21355 = CARTESIAN_POINT('',(-0.32,0.32,0.)); +#21356 = LINE('',#21357,#21358); +#21357 = CARTESIAN_POINT('',(-0.32,-2.065,0.)); +#21358 = VECTOR('',#21359,1.); +#21359 = DIRECTION('',(0.,1.,0.)); +#21360 = ORIENTED_EDGE('',*,*,#21361,.F.); +#21361 = EDGE_CURVE('',#21338,#21354,#21362,.T.); +#21362 = LINE('',#21363,#21364); +#21363 = CARTESIAN_POINT('',(-0.16,0.32,0.)); +#21364 = VECTOR('',#21365,1.); +#21365 = DIRECTION('',(-1.,0.,0.)); +#21366 = FACE_BOUND('',#21367,.F.); +#21367 = EDGE_LOOP('',(#21368,#21378,#21386,#21394)); +#21368 = ORIENTED_EDGE('',*,*,#21369,.F.); +#21369 = EDGE_CURVE('',#21370,#21372,#21374,.T.); +#21370 = VERTEX_POINT('',#21371); +#21371 = CARTESIAN_POINT('',(0.32,-2.22,0.)); +#21372 = VERTEX_POINT('',#21373); +#21373 = CARTESIAN_POINT('',(-0.32,-2.22,0.)); +#21374 = LINE('',#21375,#21376); +#21375 = CARTESIAN_POINT('',(-0.16,-2.22,0.)); +#21376 = VECTOR('',#21377,1.); +#21377 = DIRECTION('',(-1.,0.,0.)); +#21378 = ORIENTED_EDGE('',*,*,#21379,.F.); +#21379 = EDGE_CURVE('',#21380,#21370,#21382,.T.); +#21380 = VERTEX_POINT('',#21381); +#21381 = CARTESIAN_POINT('',(0.32,-2.86,0.)); +#21382 = LINE('',#21383,#21384); +#21383 = CARTESIAN_POINT('',(0.32,-3.335,0.)); +#21384 = VECTOR('',#21385,1.); +#21385 = DIRECTION('',(0.,1.,0.)); +#21386 = ORIENTED_EDGE('',*,*,#21387,.T.); +#21387 = EDGE_CURVE('',#21380,#21388,#21390,.T.); +#21388 = VERTEX_POINT('',#21389); +#21389 = CARTESIAN_POINT('',(-0.32,-2.86,0.)); +#21390 = LINE('',#21391,#21392); +#21391 = CARTESIAN_POINT('',(-0.16,-2.86,0.)); +#21392 = VECTOR('',#21393,1.); +#21393 = DIRECTION('',(-1.,0.,0.)); +#21394 = ORIENTED_EDGE('',*,*,#21395,.T.); +#21395 = EDGE_CURVE('',#21388,#21372,#21396,.T.); +#21396 = LINE('',#21397,#21398); +#21397 = CARTESIAN_POINT('',(-0.32,-3.335,0.)); +#21398 = VECTOR('',#21399,1.); +#21399 = DIRECTION('',(0.,1.,0.)); +#21400 = PLANE('',#21401); +#21401 = AXIS2_PLACEMENT_3D('',#21402,#21403,#21404); +#21402 = CARTESIAN_POINT('',(4.259053689278E-17,-3.81,0.)); +#21403 = DIRECTION('',(0.,0.,1.)); +#21404 = DIRECTION('',(1.,0.,-0.)); +#21405 = ADVANCED_FACE('',(#21406,#21593,#21627,#21661,#21695),#21729, + .T.); +#21406 = FACE_BOUND('',#21407,.T.); +#21407 = EDGE_LOOP('',(#21408,#21409,#21410,#21418,#21426,#21434,#21442, + #21450,#21458,#21466,#21474,#21482,#21490,#21498,#21506,#21514, + #21522,#21530,#21538,#21546,#21554,#21562,#21570,#21578,#21586, + #21592)); +#21408 = ORIENTED_EDGE('',*,*,#20988,.T.); +#21409 = ORIENTED_EDGE('',*,*,#21050,.T.); +#21410 = ORIENTED_EDGE('',*,*,#21411,.T.); +#21411 = EDGE_CURVE('',#21051,#21412,#21414,.T.); +#21412 = VERTEX_POINT('',#21413); +#21413 = CARTESIAN_POINT('',(-1.016,-1.27,2.54)); +#21414 = LINE('',#21415,#21416); +#21415 = CARTESIAN_POINT('',(-1.27,-1.016,2.54)); +#21416 = VECTOR('',#21417,1.); +#21417 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21418 = ORIENTED_EDGE('',*,*,#21419,.T.); +#21419 = EDGE_CURVE('',#21412,#21420,#21422,.T.); +#21420 = VERTEX_POINT('',#21421); +#21421 = CARTESIAN_POINT('',(-1.27,-1.524,2.54)); +#21422 = LINE('',#21423,#21424); +#21423 = CARTESIAN_POINT('',(-1.016,-1.27,2.54)); +#21424 = VECTOR('',#21425,1.); +#21425 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21426 = ORIENTED_EDGE('',*,*,#21427,.T.); +#21427 = EDGE_CURVE('',#21420,#21428,#21430,.T.); +#21428 = VERTEX_POINT('',#21429); +#21429 = CARTESIAN_POINT('',(-1.27,-3.556,2.54)); +#21430 = LINE('',#21431,#21432); +#21431 = CARTESIAN_POINT('',(-1.27,-1.524,2.54)); +#21432 = VECTOR('',#21433,1.); +#21433 = DIRECTION('',(0.,-1.,0.)); +#21434 = ORIENTED_EDGE('',*,*,#21435,.T.); +#21435 = EDGE_CURVE('',#21428,#21436,#21438,.T.); +#21436 = VERTEX_POINT('',#21437); +#21437 = CARTESIAN_POINT('',(-1.016,-3.81,2.54)); +#21438 = LINE('',#21439,#21440); +#21439 = CARTESIAN_POINT('',(-1.27,-3.556,2.54)); +#21440 = VECTOR('',#21441,1.); +#21441 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21442 = ORIENTED_EDGE('',*,*,#21443,.T.); +#21443 = EDGE_CURVE('',#21436,#21444,#21446,.T.); +#21444 = VERTEX_POINT('',#21445); +#21445 = CARTESIAN_POINT('',(-1.27,-4.064,2.54)); +#21446 = LINE('',#21447,#21448); +#21447 = CARTESIAN_POINT('',(-1.016,-3.81,2.54)); +#21448 = VECTOR('',#21449,1.); +#21449 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21450 = ORIENTED_EDGE('',*,*,#21451,.T.); +#21451 = EDGE_CURVE('',#21444,#21452,#21454,.T.); +#21452 = VERTEX_POINT('',#21453); +#21453 = CARTESIAN_POINT('',(-1.27,-6.096,2.54)); +#21454 = LINE('',#21455,#21456); +#21455 = CARTESIAN_POINT('',(-1.27,-4.064,2.54)); +#21456 = VECTOR('',#21457,1.); +#21457 = DIRECTION('',(0.,-1.,0.)); +#21458 = ORIENTED_EDGE('',*,*,#21459,.T.); +#21459 = EDGE_CURVE('',#21452,#21460,#21462,.T.); +#21460 = VERTEX_POINT('',#21461); +#21461 = CARTESIAN_POINT('',(-1.016,-6.35,2.54)); +#21462 = LINE('',#21463,#21464); +#21463 = CARTESIAN_POINT('',(-1.27,-6.096,2.54)); +#21464 = VECTOR('',#21465,1.); +#21465 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21466 = ORIENTED_EDGE('',*,*,#21467,.T.); +#21467 = EDGE_CURVE('',#21460,#21468,#21470,.T.); +#21468 = VERTEX_POINT('',#21469); +#21469 = CARTESIAN_POINT('',(-1.27,-6.604,2.54)); +#21470 = LINE('',#21471,#21472); +#21471 = CARTESIAN_POINT('',(-1.016,-6.35,2.54)); +#21472 = VECTOR('',#21473,1.); +#21473 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21474 = ORIENTED_EDGE('',*,*,#21475,.T.); +#21475 = EDGE_CURVE('',#21468,#21476,#21478,.T.); +#21476 = VERTEX_POINT('',#21477); +#21477 = CARTESIAN_POINT('',(-1.27,-8.636,2.54)); +#21478 = LINE('',#21479,#21480); +#21479 = CARTESIAN_POINT('',(-1.27,-6.604,2.54)); +#21480 = VECTOR('',#21481,1.); +#21481 = DIRECTION('',(0.,-1.,0.)); +#21482 = ORIENTED_EDGE('',*,*,#21483,.T.); +#21483 = EDGE_CURVE('',#21476,#21484,#21486,.T.); +#21484 = VERTEX_POINT('',#21485); +#21485 = CARTESIAN_POINT('',(-1.016,-8.89,2.54)); +#21486 = LINE('',#21487,#21488); +#21487 = CARTESIAN_POINT('',(-1.27,-8.636,2.54)); +#21488 = VECTOR('',#21489,1.); +#21489 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21490 = ORIENTED_EDGE('',*,*,#21491,.T.); +#21491 = EDGE_CURVE('',#21484,#21492,#21494,.T.); +#21492 = VERTEX_POINT('',#21493); +#21493 = CARTESIAN_POINT('',(1.016,-8.89,2.54)); +#21494 = LINE('',#21495,#21496); +#21495 = CARTESIAN_POINT('',(-1.016,-8.89,2.54)); +#21496 = VECTOR('',#21497,1.); +#21497 = DIRECTION('',(1.,0.,0.)); +#21498 = ORIENTED_EDGE('',*,*,#21499,.T.); +#21499 = EDGE_CURVE('',#21492,#21500,#21502,.T.); +#21500 = VERTEX_POINT('',#21501); +#21501 = CARTESIAN_POINT('',(1.27,-8.636,2.54)); +#21502 = LINE('',#21503,#21504); +#21503 = CARTESIAN_POINT('',(1.016,-8.89,2.54)); +#21504 = VECTOR('',#21505,1.); +#21505 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21506 = ORIENTED_EDGE('',*,*,#21507,.T.); +#21507 = EDGE_CURVE('',#21500,#21508,#21510,.T.); +#21508 = VERTEX_POINT('',#21509); +#21509 = CARTESIAN_POINT('',(1.27,-6.604,2.54)); +#21510 = LINE('',#21511,#21512); +#21511 = CARTESIAN_POINT('',(1.27,-8.636,2.54)); +#21512 = VECTOR('',#21513,1.); +#21513 = DIRECTION('',(0.,1.,0.)); +#21514 = ORIENTED_EDGE('',*,*,#21515,.T.); +#21515 = EDGE_CURVE('',#21508,#21516,#21518,.T.); +#21516 = VERTEX_POINT('',#21517); +#21517 = CARTESIAN_POINT('',(1.016,-6.35,2.54)); +#21518 = LINE('',#21519,#21520); +#21519 = CARTESIAN_POINT('',(1.27,-6.604,2.54)); +#21520 = VECTOR('',#21521,1.); +#21521 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21522 = ORIENTED_EDGE('',*,*,#21523,.T.); +#21523 = EDGE_CURVE('',#21516,#21524,#21526,.T.); +#21524 = VERTEX_POINT('',#21525); +#21525 = CARTESIAN_POINT('',(1.27,-6.096,2.54)); +#21526 = LINE('',#21527,#21528); +#21527 = CARTESIAN_POINT('',(1.016,-6.35,2.54)); +#21528 = VECTOR('',#21529,1.); +#21529 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21530 = ORIENTED_EDGE('',*,*,#21531,.T.); +#21531 = EDGE_CURVE('',#21524,#21532,#21534,.T.); +#21532 = VERTEX_POINT('',#21533); +#21533 = CARTESIAN_POINT('',(1.27,-4.064,2.54)); +#21534 = LINE('',#21535,#21536); +#21535 = CARTESIAN_POINT('',(1.27,-6.096,2.54)); +#21536 = VECTOR('',#21537,1.); +#21537 = DIRECTION('',(0.,1.,0.)); +#21538 = ORIENTED_EDGE('',*,*,#21539,.T.); +#21539 = EDGE_CURVE('',#21532,#21540,#21542,.T.); +#21540 = VERTEX_POINT('',#21541); +#21541 = CARTESIAN_POINT('',(1.016,-3.81,2.54)); +#21542 = LINE('',#21543,#21544); +#21543 = CARTESIAN_POINT('',(1.27,-4.064,2.54)); +#21544 = VECTOR('',#21545,1.); +#21545 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21546 = ORIENTED_EDGE('',*,*,#21547,.T.); +#21547 = EDGE_CURVE('',#21540,#21548,#21550,.T.); +#21548 = VERTEX_POINT('',#21549); +#21549 = CARTESIAN_POINT('',(1.27,-3.556,2.54)); +#21550 = LINE('',#21551,#21552); +#21551 = CARTESIAN_POINT('',(1.016,-3.81,2.54)); +#21552 = VECTOR('',#21553,1.); +#21553 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21554 = ORIENTED_EDGE('',*,*,#21555,.T.); +#21555 = EDGE_CURVE('',#21548,#21556,#21558,.T.); +#21556 = VERTEX_POINT('',#21557); +#21557 = CARTESIAN_POINT('',(1.27,-1.524,2.54)); +#21558 = LINE('',#21559,#21560); +#21559 = CARTESIAN_POINT('',(1.27,-3.556,2.54)); +#21560 = VECTOR('',#21561,1.); +#21561 = DIRECTION('',(0.,1.,0.)); +#21562 = ORIENTED_EDGE('',*,*,#21563,.T.); +#21563 = EDGE_CURVE('',#21556,#21564,#21566,.T.); +#21564 = VERTEX_POINT('',#21565); +#21565 = CARTESIAN_POINT('',(1.016,-1.27,2.54)); +#21566 = LINE('',#21567,#21568); +#21567 = CARTESIAN_POINT('',(1.27,-1.524,2.54)); +#21568 = VECTOR('',#21569,1.); +#21569 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21570 = ORIENTED_EDGE('',*,*,#21571,.T.); +#21571 = EDGE_CURVE('',#21564,#21572,#21574,.T.); +#21572 = VERTEX_POINT('',#21573); +#21573 = CARTESIAN_POINT('',(1.27,-1.016,2.54)); +#21574 = LINE('',#21575,#21576); +#21575 = CARTESIAN_POINT('',(1.016,-1.27,2.54)); +#21576 = VECTOR('',#21577,1.); +#21577 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21578 = ORIENTED_EDGE('',*,*,#21579,.T.); +#21579 = EDGE_CURVE('',#21572,#21580,#21582,.T.); +#21580 = VERTEX_POINT('',#21581); +#21581 = CARTESIAN_POINT('',(1.27,1.016,2.54)); +#21582 = LINE('',#21583,#21584); +#21583 = CARTESIAN_POINT('',(1.27,-1.016,2.54)); +#21584 = VECTOR('',#21585,1.); +#21585 = DIRECTION('',(0.,1.,0.)); +#21586 = ORIENTED_EDGE('',*,*,#21587,.T.); +#21587 = EDGE_CURVE('',#21580,#21021,#21588,.T.); +#21588 = LINE('',#21589,#21590); +#21589 = CARTESIAN_POINT('',(1.27,1.016,2.54)); +#21590 = VECTOR('',#21591,1.); +#21591 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21592 = ORIENTED_EDGE('',*,*,#21028,.T.); +#21593 = FACE_BOUND('',#21594,.T.); +#21594 = EDGE_LOOP('',(#21595,#21605,#21613,#21621)); +#21595 = ORIENTED_EDGE('',*,*,#21596,.F.); +#21596 = EDGE_CURVE('',#21597,#21599,#21601,.T.); +#21597 = VERTEX_POINT('',#21598); +#21598 = CARTESIAN_POINT('',(0.32,-4.76,2.54)); +#21599 = VERTEX_POINT('',#21600); +#21600 = CARTESIAN_POINT('',(-0.32,-4.76,2.54)); +#21601 = LINE('',#21602,#21603); +#21602 = CARTESIAN_POINT('',(-0.16,-4.76,2.54)); +#21603 = VECTOR('',#21604,1.); +#21604 = DIRECTION('',(-1.,0.,0.)); +#21605 = ORIENTED_EDGE('',*,*,#21606,.F.); +#21606 = EDGE_CURVE('',#21607,#21597,#21609,.T.); +#21607 = VERTEX_POINT('',#21608); +#21608 = CARTESIAN_POINT('',(0.32,-5.4,2.54)); +#21609 = LINE('',#21610,#21611); +#21610 = CARTESIAN_POINT('',(0.32,-4.605,2.54)); +#21611 = VECTOR('',#21612,1.); +#21612 = DIRECTION('',(0.,1.,0.)); +#21613 = ORIENTED_EDGE('',*,*,#21614,.T.); +#21614 = EDGE_CURVE('',#21607,#21615,#21617,.T.); +#21615 = VERTEX_POINT('',#21616); +#21616 = CARTESIAN_POINT('',(-0.32,-5.4,2.54)); +#21617 = LINE('',#21618,#21619); +#21618 = CARTESIAN_POINT('',(-0.16,-5.4,2.54)); +#21619 = VECTOR('',#21620,1.); +#21620 = DIRECTION('',(-1.,0.,0.)); +#21621 = ORIENTED_EDGE('',*,*,#21622,.T.); +#21622 = EDGE_CURVE('',#21615,#21599,#21623,.T.); +#21623 = LINE('',#21624,#21625); +#21624 = CARTESIAN_POINT('',(-0.32,-4.605,2.54)); +#21625 = VECTOR('',#21626,1.); +#21626 = DIRECTION('',(0.,1.,0.)); +#21627 = FACE_BOUND('',#21628,.T.); +#21628 = EDGE_LOOP('',(#21629,#21639,#21647,#21655)); +#21629 = ORIENTED_EDGE('',*,*,#21630,.F.); +#21630 = EDGE_CURVE('',#21631,#21633,#21635,.T.); +#21631 = VERTEX_POINT('',#21632); +#21632 = CARTESIAN_POINT('',(0.32,-7.94,2.54)); +#21633 = VERTEX_POINT('',#21634); +#21634 = CARTESIAN_POINT('',(0.32,-7.3,2.54)); +#21635 = LINE('',#21636,#21637); +#21636 = CARTESIAN_POINT('',(0.32,-5.875,2.54)); +#21637 = VECTOR('',#21638,1.); +#21638 = DIRECTION('',(0.,1.,0.)); +#21639 = ORIENTED_EDGE('',*,*,#21640,.T.); +#21640 = EDGE_CURVE('',#21631,#21641,#21643,.T.); +#21641 = VERTEX_POINT('',#21642); +#21642 = CARTESIAN_POINT('',(-0.32,-7.94,2.54)); +#21643 = LINE('',#21644,#21645); +#21644 = CARTESIAN_POINT('',(-0.16,-7.94,2.54)); +#21645 = VECTOR('',#21646,1.); +#21646 = DIRECTION('',(-1.,0.,0.)); +#21647 = ORIENTED_EDGE('',*,*,#21648,.T.); +#21648 = EDGE_CURVE('',#21641,#21649,#21651,.T.); +#21649 = VERTEX_POINT('',#21650); +#21650 = CARTESIAN_POINT('',(-0.32,-7.3,2.54)); +#21651 = LINE('',#21652,#21653); +#21652 = CARTESIAN_POINT('',(-0.32,-5.875,2.54)); +#21653 = VECTOR('',#21654,1.); +#21654 = DIRECTION('',(0.,1.,0.)); +#21655 = ORIENTED_EDGE('',*,*,#21656,.F.); +#21656 = EDGE_CURVE('',#21633,#21649,#21657,.T.); +#21657 = LINE('',#21658,#21659); +#21658 = CARTESIAN_POINT('',(-0.16,-7.3,2.54)); +#21659 = VECTOR('',#21660,1.); +#21660 = DIRECTION('',(-1.,0.,0.)); +#21661 = FACE_BOUND('',#21662,.T.); +#21662 = EDGE_LOOP('',(#21663,#21673,#21681,#21689)); +#21663 = ORIENTED_EDGE('',*,*,#21664,.F.); +#21664 = EDGE_CURVE('',#21665,#21667,#21669,.T.); +#21665 = VERTEX_POINT('',#21666); +#21666 = CARTESIAN_POINT('',(0.32,-0.32,2.54)); +#21667 = VERTEX_POINT('',#21668); +#21668 = CARTESIAN_POINT('',(0.32,0.32,2.54)); +#21669 = LINE('',#21670,#21671); +#21670 = CARTESIAN_POINT('',(0.32,-2.065,2.54)); +#21671 = VECTOR('',#21672,1.); +#21672 = DIRECTION('',(0.,1.,0.)); +#21673 = ORIENTED_EDGE('',*,*,#21674,.T.); +#21674 = EDGE_CURVE('',#21665,#21675,#21677,.T.); +#21675 = VERTEX_POINT('',#21676); +#21676 = CARTESIAN_POINT('',(-0.32,-0.32,2.54)); +#21677 = LINE('',#21678,#21679); +#21678 = CARTESIAN_POINT('',(-0.16,-0.32,2.54)); +#21679 = VECTOR('',#21680,1.); +#21680 = DIRECTION('',(-1.,0.,0.)); +#21681 = ORIENTED_EDGE('',*,*,#21682,.T.); +#21682 = EDGE_CURVE('',#21675,#21683,#21685,.T.); +#21683 = VERTEX_POINT('',#21684); +#21684 = CARTESIAN_POINT('',(-0.32,0.32,2.54)); +#21685 = LINE('',#21686,#21687); +#21686 = CARTESIAN_POINT('',(-0.32,-2.065,2.54)); +#21687 = VECTOR('',#21688,1.); +#21688 = DIRECTION('',(0.,1.,0.)); +#21689 = ORIENTED_EDGE('',*,*,#21690,.F.); +#21690 = EDGE_CURVE('',#21667,#21683,#21691,.T.); +#21691 = LINE('',#21692,#21693); +#21692 = CARTESIAN_POINT('',(-0.16,0.32,2.54)); +#21693 = VECTOR('',#21694,1.); +#21694 = DIRECTION('',(-1.,0.,0.)); +#21695 = FACE_BOUND('',#21696,.T.); +#21696 = EDGE_LOOP('',(#21697,#21707,#21715,#21723)); +#21697 = ORIENTED_EDGE('',*,*,#21698,.F.); +#21698 = EDGE_CURVE('',#21699,#21701,#21703,.T.); +#21699 = VERTEX_POINT('',#21700); +#21700 = CARTESIAN_POINT('',(0.32,-2.22,2.54)); +#21701 = VERTEX_POINT('',#21702); +#21702 = CARTESIAN_POINT('',(-0.32,-2.22,2.54)); +#21703 = LINE('',#21704,#21705); +#21704 = CARTESIAN_POINT('',(-0.16,-2.22,2.54)); +#21705 = VECTOR('',#21706,1.); +#21706 = DIRECTION('',(-1.,0.,0.)); +#21707 = ORIENTED_EDGE('',*,*,#21708,.F.); +#21708 = EDGE_CURVE('',#21709,#21699,#21711,.T.); +#21709 = VERTEX_POINT('',#21710); +#21710 = CARTESIAN_POINT('',(0.32,-2.86,2.54)); +#21711 = LINE('',#21712,#21713); +#21712 = CARTESIAN_POINT('',(0.32,-3.335,2.54)); +#21713 = VECTOR('',#21714,1.); +#21714 = DIRECTION('',(0.,1.,0.)); +#21715 = ORIENTED_EDGE('',*,*,#21716,.T.); +#21716 = EDGE_CURVE('',#21709,#21717,#21719,.T.); +#21717 = VERTEX_POINT('',#21718); +#21718 = CARTESIAN_POINT('',(-0.32,-2.86,2.54)); +#21719 = LINE('',#21720,#21721); +#21720 = CARTESIAN_POINT('',(-0.16,-2.86,2.54)); +#21721 = VECTOR('',#21722,1.); +#21722 = DIRECTION('',(-1.,0.,0.)); +#21723 = ORIENTED_EDGE('',*,*,#21724,.T.); +#21724 = EDGE_CURVE('',#21717,#21701,#21725,.T.); +#21725 = LINE('',#21726,#21727); +#21726 = CARTESIAN_POINT('',(-0.32,-3.335,2.54)); +#21727 = VECTOR('',#21728,1.); +#21728 = DIRECTION('',(0.,1.,0.)); +#21729 = PLANE('',#21730); +#21730 = AXIS2_PLACEMENT_3D('',#21731,#21732,#21733); +#21731 = CARTESIAN_POINT('',(4.259053689278E-17,-3.81,2.54)); +#21732 = DIRECTION('',(0.,0.,1.)); +#21733 = DIRECTION('',(1.,0.,-0.)); +#21734 = ADVANCED_FACE('',(#21735),#21746,.F.); +#21735 = FACE_BOUND('',#21736,.F.); +#21736 = EDGE_LOOP('',(#21737,#21743,#21744,#21745)); +#21737 = ORIENTED_EDGE('',*,*,#21738,.T.); +#21738 = EDGE_CURVE('',#21251,#21580,#21739,.T.); +#21739 = LINE('',#21740,#21741); +#21740 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#21741 = VECTOR('',#21742,1.); +#21742 = DIRECTION('',(0.,0.,1.)); +#21743 = ORIENTED_EDGE('',*,*,#21587,.T.); +#21744 = ORIENTED_EDGE('',*,*,#21018,.F.); +#21745 = ORIENTED_EDGE('',*,*,#21258,.F.); +#21746 = PLANE('',#21747); +#21747 = AXIS2_PLACEMENT_3D('',#21748,#21749,#21750); +#21748 = CARTESIAN_POINT('',(1.27,1.016,0.)); +#21749 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21750 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21751 = ADVANCED_FACE('',(#21752),#21763,.F.); +#21752 = FACE_BOUND('',#21753,.F.); +#21753 = EDGE_LOOP('',(#21754,#21755,#21756,#21762)); +#21754 = ORIENTED_EDGE('',*,*,#21058,.T.); +#21755 = ORIENTED_EDGE('',*,*,#21411,.T.); +#21756 = ORIENTED_EDGE('',*,*,#21757,.F.); +#21757 = EDGE_CURVE('',#21083,#21412,#21758,.T.); +#21758 = LINE('',#21759,#21760); +#21759 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#21760 = VECTOR('',#21761,1.); +#21761 = DIRECTION('',(0.,0.,1.)); +#21762 = ORIENTED_EDGE('',*,*,#21082,.F.); +#21763 = PLANE('',#21764); +#21764 = AXIS2_PLACEMENT_3D('',#21765,#21766,#21767); +#21765 = CARTESIAN_POINT('',(-1.27,-1.016,0.)); +#21766 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21767 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21768 = ADVANCED_FACE('',(#21769),#21780,.F.); +#21769 = FACE_BOUND('',#21770,.F.); +#21770 = EDGE_LOOP('',(#21771,#21777,#21778,#21779)); +#21771 = ORIENTED_EDGE('',*,*,#21772,.T.); +#21772 = EDGE_CURVE('',#21243,#21572,#21773,.T.); +#21773 = LINE('',#21774,#21775); +#21774 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#21775 = VECTOR('',#21776,1.); +#21776 = DIRECTION('',(0.,0.,1.)); +#21777 = ORIENTED_EDGE('',*,*,#21579,.T.); +#21778 = ORIENTED_EDGE('',*,*,#21738,.F.); +#21779 = ORIENTED_EDGE('',*,*,#21250,.F.); +#21780 = PLANE('',#21781); +#21781 = AXIS2_PLACEMENT_3D('',#21782,#21783,#21784); +#21782 = CARTESIAN_POINT('',(1.27,-1.016,0.)); +#21783 = DIRECTION('',(-1.,0.,0.)); +#21784 = DIRECTION('',(0.,1.,0.)); +#21785 = ADVANCED_FACE('',(#21786),#21797,.F.); +#21786 = FACE_BOUND('',#21787,.F.); +#21787 = EDGE_LOOP('',(#21788,#21789,#21790,#21796)); +#21788 = ORIENTED_EDGE('',*,*,#21757,.T.); +#21789 = ORIENTED_EDGE('',*,*,#21419,.T.); +#21790 = ORIENTED_EDGE('',*,*,#21791,.F.); +#21791 = EDGE_CURVE('',#21091,#21420,#21792,.T.); +#21792 = LINE('',#21793,#21794); +#21793 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#21794 = VECTOR('',#21795,1.); +#21795 = DIRECTION('',(0.,0.,1.)); +#21796 = ORIENTED_EDGE('',*,*,#21090,.F.); +#21797 = PLANE('',#21798); +#21798 = AXIS2_PLACEMENT_3D('',#21799,#21800,#21801); +#21799 = CARTESIAN_POINT('',(-1.016,-1.27,0.)); +#21800 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21801 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21802 = ADVANCED_FACE('',(#21803),#21814,.F.); +#21803 = FACE_BOUND('',#21804,.F.); +#21804 = EDGE_LOOP('',(#21805,#21811,#21812,#21813)); +#21805 = ORIENTED_EDGE('',*,*,#21806,.T.); +#21806 = EDGE_CURVE('',#21235,#21564,#21807,.T.); +#21807 = LINE('',#21808,#21809); +#21808 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#21809 = VECTOR('',#21810,1.); +#21810 = DIRECTION('',(0.,0.,1.)); +#21811 = ORIENTED_EDGE('',*,*,#21571,.T.); +#21812 = ORIENTED_EDGE('',*,*,#21772,.F.); +#21813 = ORIENTED_EDGE('',*,*,#21242,.F.); +#21814 = PLANE('',#21815); +#21815 = AXIS2_PLACEMENT_3D('',#21816,#21817,#21818); +#21816 = CARTESIAN_POINT('',(1.016,-1.27,0.)); +#21817 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21818 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21819 = ADVANCED_FACE('',(#21820),#21831,.F.); +#21820 = FACE_BOUND('',#21821,.F.); +#21821 = EDGE_LOOP('',(#21822,#21823,#21824,#21830)); +#21822 = ORIENTED_EDGE('',*,*,#21791,.T.); +#21823 = ORIENTED_EDGE('',*,*,#21427,.T.); +#21824 = ORIENTED_EDGE('',*,*,#21825,.F.); +#21825 = EDGE_CURVE('',#21099,#21428,#21826,.T.); +#21826 = LINE('',#21827,#21828); +#21827 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#21828 = VECTOR('',#21829,1.); +#21829 = DIRECTION('',(0.,0.,1.)); +#21830 = ORIENTED_EDGE('',*,*,#21098,.F.); +#21831 = PLANE('',#21832); +#21832 = AXIS2_PLACEMENT_3D('',#21833,#21834,#21835); +#21833 = CARTESIAN_POINT('',(-1.27,-1.524,0.)); +#21834 = DIRECTION('',(1.,0.,0.)); +#21835 = DIRECTION('',(0.,-1.,0.)); +#21836 = ADVANCED_FACE('',(#21837),#21848,.F.); +#21837 = FACE_BOUND('',#21838,.F.); +#21838 = EDGE_LOOP('',(#21839,#21845,#21846,#21847)); +#21839 = ORIENTED_EDGE('',*,*,#21840,.T.); +#21840 = EDGE_CURVE('',#21227,#21556,#21841,.T.); +#21841 = LINE('',#21842,#21843); +#21842 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#21843 = VECTOR('',#21844,1.); +#21844 = DIRECTION('',(0.,0.,1.)); +#21845 = ORIENTED_EDGE('',*,*,#21563,.T.); +#21846 = ORIENTED_EDGE('',*,*,#21806,.F.); +#21847 = ORIENTED_EDGE('',*,*,#21234,.F.); +#21848 = PLANE('',#21849); +#21849 = AXIS2_PLACEMENT_3D('',#21850,#21851,#21852); +#21850 = CARTESIAN_POINT('',(1.27,-1.524,0.)); +#21851 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21852 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21853 = ADVANCED_FACE('',(#21854),#21865,.F.); +#21854 = FACE_BOUND('',#21855,.F.); +#21855 = EDGE_LOOP('',(#21856,#21857,#21858,#21864)); +#21856 = ORIENTED_EDGE('',*,*,#21825,.T.); +#21857 = ORIENTED_EDGE('',*,*,#21435,.T.); +#21858 = ORIENTED_EDGE('',*,*,#21859,.F.); +#21859 = EDGE_CURVE('',#21107,#21436,#21860,.T.); +#21860 = LINE('',#21861,#21862); +#21861 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#21862 = VECTOR('',#21863,1.); +#21863 = DIRECTION('',(0.,0.,1.)); +#21864 = ORIENTED_EDGE('',*,*,#21106,.F.); +#21865 = PLANE('',#21866); +#21866 = AXIS2_PLACEMENT_3D('',#21867,#21868,#21869); +#21867 = CARTESIAN_POINT('',(-1.27,-3.556,0.)); +#21868 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21869 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21870 = ADVANCED_FACE('',(#21871),#21882,.F.); +#21871 = FACE_BOUND('',#21872,.F.); +#21872 = EDGE_LOOP('',(#21873,#21879,#21880,#21881)); +#21873 = ORIENTED_EDGE('',*,*,#21874,.T.); +#21874 = EDGE_CURVE('',#21219,#21548,#21875,.T.); +#21875 = LINE('',#21876,#21877); +#21876 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#21877 = VECTOR('',#21878,1.); +#21878 = DIRECTION('',(0.,0.,1.)); +#21879 = ORIENTED_EDGE('',*,*,#21555,.T.); +#21880 = ORIENTED_EDGE('',*,*,#21840,.F.); +#21881 = ORIENTED_EDGE('',*,*,#21226,.F.); +#21882 = PLANE('',#21883); +#21883 = AXIS2_PLACEMENT_3D('',#21884,#21885,#21886); +#21884 = CARTESIAN_POINT('',(1.27,-3.556,0.)); +#21885 = DIRECTION('',(-1.,0.,0.)); +#21886 = DIRECTION('',(0.,1.,0.)); +#21887 = ADVANCED_FACE('',(#21888),#21899,.F.); +#21888 = FACE_BOUND('',#21889,.F.); +#21889 = EDGE_LOOP('',(#21890,#21891,#21892,#21898)); +#21890 = ORIENTED_EDGE('',*,*,#21859,.T.); +#21891 = ORIENTED_EDGE('',*,*,#21443,.T.); +#21892 = ORIENTED_EDGE('',*,*,#21893,.F.); +#21893 = EDGE_CURVE('',#21115,#21444,#21894,.T.); +#21894 = LINE('',#21895,#21896); +#21895 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#21896 = VECTOR('',#21897,1.); +#21897 = DIRECTION('',(0.,0.,1.)); +#21898 = ORIENTED_EDGE('',*,*,#21114,.F.); +#21899 = PLANE('',#21900); +#21900 = AXIS2_PLACEMENT_3D('',#21901,#21902,#21903); +#21901 = CARTESIAN_POINT('',(-1.016,-3.81,0.)); +#21902 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21903 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21904 = ADVANCED_FACE('',(#21905),#21916,.F.); +#21905 = FACE_BOUND('',#21906,.F.); +#21906 = EDGE_LOOP('',(#21907,#21913,#21914,#21915)); +#21907 = ORIENTED_EDGE('',*,*,#21908,.T.); +#21908 = EDGE_CURVE('',#21211,#21540,#21909,.T.); +#21909 = LINE('',#21910,#21911); +#21910 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#21911 = VECTOR('',#21912,1.); +#21912 = DIRECTION('',(0.,0.,1.)); +#21913 = ORIENTED_EDGE('',*,*,#21547,.T.); +#21914 = ORIENTED_EDGE('',*,*,#21874,.F.); +#21915 = ORIENTED_EDGE('',*,*,#21218,.F.); +#21916 = PLANE('',#21917); +#21917 = AXIS2_PLACEMENT_3D('',#21918,#21919,#21920); +#21918 = CARTESIAN_POINT('',(1.016,-3.81,0.)); +#21919 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21920 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21921 = ADVANCED_FACE('',(#21922),#21933,.F.); +#21922 = FACE_BOUND('',#21923,.F.); +#21923 = EDGE_LOOP('',(#21924,#21925,#21926,#21932)); +#21924 = ORIENTED_EDGE('',*,*,#21893,.T.); +#21925 = ORIENTED_EDGE('',*,*,#21451,.T.); +#21926 = ORIENTED_EDGE('',*,*,#21927,.F.); +#21927 = EDGE_CURVE('',#21123,#21452,#21928,.T.); +#21928 = LINE('',#21929,#21930); +#21929 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#21930 = VECTOR('',#21931,1.); +#21931 = DIRECTION('',(0.,0.,1.)); +#21932 = ORIENTED_EDGE('',*,*,#21122,.F.); +#21933 = PLANE('',#21934); +#21934 = AXIS2_PLACEMENT_3D('',#21935,#21936,#21937); +#21935 = CARTESIAN_POINT('',(-1.27,-4.064,0.)); +#21936 = DIRECTION('',(1.,0.,0.)); +#21937 = DIRECTION('',(0.,-1.,0.)); +#21938 = ADVANCED_FACE('',(#21939),#21950,.F.); +#21939 = FACE_BOUND('',#21940,.F.); +#21940 = EDGE_LOOP('',(#21941,#21947,#21948,#21949)); +#21941 = ORIENTED_EDGE('',*,*,#21942,.T.); +#21942 = EDGE_CURVE('',#21203,#21532,#21943,.T.); +#21943 = LINE('',#21944,#21945); +#21944 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#21945 = VECTOR('',#21946,1.); +#21946 = DIRECTION('',(0.,0.,1.)); +#21947 = ORIENTED_EDGE('',*,*,#21539,.T.); +#21948 = ORIENTED_EDGE('',*,*,#21908,.F.); +#21949 = ORIENTED_EDGE('',*,*,#21210,.F.); +#21950 = PLANE('',#21951); +#21951 = AXIS2_PLACEMENT_3D('',#21952,#21953,#21954); +#21952 = CARTESIAN_POINT('',(1.27,-4.064,0.)); +#21953 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#21954 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#21955 = ADVANCED_FACE('',(#21956),#21967,.F.); +#21956 = FACE_BOUND('',#21957,.F.); +#21957 = EDGE_LOOP('',(#21958,#21959,#21960,#21966)); +#21958 = ORIENTED_EDGE('',*,*,#21927,.T.); +#21959 = ORIENTED_EDGE('',*,*,#21459,.T.); +#21960 = ORIENTED_EDGE('',*,*,#21961,.F.); +#21961 = EDGE_CURVE('',#21131,#21460,#21962,.T.); +#21962 = LINE('',#21963,#21964); +#21963 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#21964 = VECTOR('',#21965,1.); +#21965 = DIRECTION('',(0.,0.,1.)); +#21966 = ORIENTED_EDGE('',*,*,#21130,.F.); +#21967 = PLANE('',#21968); +#21968 = AXIS2_PLACEMENT_3D('',#21969,#21970,#21971); +#21969 = CARTESIAN_POINT('',(-1.27,-6.096,0.)); +#21970 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#21971 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#21972 = ADVANCED_FACE('',(#21973),#21984,.F.); +#21973 = FACE_BOUND('',#21974,.F.); +#21974 = EDGE_LOOP('',(#21975,#21981,#21982,#21983)); +#21975 = ORIENTED_EDGE('',*,*,#21976,.T.); +#21976 = EDGE_CURVE('',#21195,#21524,#21977,.T.); +#21977 = LINE('',#21978,#21979); +#21978 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#21979 = VECTOR('',#21980,1.); +#21980 = DIRECTION('',(0.,0.,1.)); +#21981 = ORIENTED_EDGE('',*,*,#21531,.T.); +#21982 = ORIENTED_EDGE('',*,*,#21942,.F.); +#21983 = ORIENTED_EDGE('',*,*,#21202,.F.); +#21984 = PLANE('',#21985); +#21985 = AXIS2_PLACEMENT_3D('',#21986,#21987,#21988); +#21986 = CARTESIAN_POINT('',(1.27,-6.096,0.)); +#21987 = DIRECTION('',(-1.,0.,0.)); +#21988 = DIRECTION('',(0.,1.,0.)); +#21989 = ADVANCED_FACE('',(#21990),#22001,.F.); +#21990 = FACE_BOUND('',#21991,.F.); +#21991 = EDGE_LOOP('',(#21992,#21993,#21994,#22000)); +#21992 = ORIENTED_EDGE('',*,*,#21961,.T.); +#21993 = ORIENTED_EDGE('',*,*,#21467,.T.); +#21994 = ORIENTED_EDGE('',*,*,#21995,.F.); +#21995 = EDGE_CURVE('',#21139,#21468,#21996,.T.); +#21996 = LINE('',#21997,#21998); +#21997 = CARTESIAN_POINT('',(-1.27,-6.604,0.)); +#21998 = VECTOR('',#21999,1.); +#21999 = DIRECTION('',(0.,0.,1.)); +#22000 = ORIENTED_EDGE('',*,*,#21138,.F.); +#22001 = PLANE('',#22002); +#22002 = AXIS2_PLACEMENT_3D('',#22003,#22004,#22005); +#22003 = CARTESIAN_POINT('',(-1.016,-6.35,0.)); +#22004 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#22005 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#22006 = ADVANCED_FACE('',(#22007),#22018,.F.); +#22007 = FACE_BOUND('',#22008,.F.); +#22008 = EDGE_LOOP('',(#22009,#22015,#22016,#22017)); +#22009 = ORIENTED_EDGE('',*,*,#22010,.T.); +#22010 = EDGE_CURVE('',#21187,#21516,#22011,.T.); +#22011 = LINE('',#22012,#22013); +#22012 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#22013 = VECTOR('',#22014,1.); +#22014 = DIRECTION('',(0.,0.,1.)); +#22015 = ORIENTED_EDGE('',*,*,#21523,.T.); +#22016 = ORIENTED_EDGE('',*,*,#21976,.F.); +#22017 = ORIENTED_EDGE('',*,*,#21194,.F.); +#22018 = PLANE('',#22019); +#22019 = AXIS2_PLACEMENT_3D('',#22020,#22021,#22022); +#22020 = CARTESIAN_POINT('',(1.016,-6.35,0.)); +#22021 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#22022 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#22023 = ADVANCED_FACE('',(#22024),#22035,.F.); +#22024 = FACE_BOUND('',#22025,.F.); +#22025 = EDGE_LOOP('',(#22026,#22027,#22028,#22034)); +#22026 = ORIENTED_EDGE('',*,*,#21995,.T.); +#22027 = ORIENTED_EDGE('',*,*,#21475,.T.); +#22028 = ORIENTED_EDGE('',*,*,#22029,.F.); +#22029 = EDGE_CURVE('',#21147,#21476,#22030,.T.); +#22030 = LINE('',#22031,#22032); +#22031 = CARTESIAN_POINT('',(-1.27,-8.636,0.)); +#22032 = VECTOR('',#22033,1.); +#22033 = DIRECTION('',(0.,0.,1.)); +#22034 = ORIENTED_EDGE('',*,*,#21146,.F.); +#22035 = PLANE('',#22036); +#22036 = AXIS2_PLACEMENT_3D('',#22037,#22038,#22039); +#22037 = CARTESIAN_POINT('',(-1.27,-6.604,0.)); +#22038 = DIRECTION('',(1.,0.,0.)); +#22039 = DIRECTION('',(0.,-1.,0.)); +#22040 = ADVANCED_FACE('',(#22041),#22052,.F.); +#22041 = FACE_BOUND('',#22042,.F.); +#22042 = EDGE_LOOP('',(#22043,#22049,#22050,#22051)); +#22043 = ORIENTED_EDGE('',*,*,#22044,.T.); +#22044 = EDGE_CURVE('',#21179,#21508,#22045,.T.); +#22045 = LINE('',#22046,#22047); +#22046 = CARTESIAN_POINT('',(1.27,-6.604,0.)); +#22047 = VECTOR('',#22048,1.); +#22048 = DIRECTION('',(0.,0.,1.)); +#22049 = ORIENTED_EDGE('',*,*,#21515,.T.); +#22050 = ORIENTED_EDGE('',*,*,#22010,.F.); +#22051 = ORIENTED_EDGE('',*,*,#21186,.F.); +#22052 = PLANE('',#22053); +#22053 = AXIS2_PLACEMENT_3D('',#22054,#22055,#22056); +#22054 = CARTESIAN_POINT('',(1.27,-6.604,0.)); +#22055 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#22056 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#22057 = ADVANCED_FACE('',(#22058),#22069,.F.); +#22058 = FACE_BOUND('',#22059,.F.); +#22059 = EDGE_LOOP('',(#22060,#22061,#22062,#22068)); +#22060 = ORIENTED_EDGE('',*,*,#22029,.T.); +#22061 = ORIENTED_EDGE('',*,*,#21483,.T.); +#22062 = ORIENTED_EDGE('',*,*,#22063,.F.); +#22063 = EDGE_CURVE('',#21155,#21484,#22064,.T.); +#22064 = LINE('',#22065,#22066); +#22065 = CARTESIAN_POINT('',(-1.016,-8.89,0.)); +#22066 = VECTOR('',#22067,1.); +#22067 = DIRECTION('',(0.,0.,1.)); +#22068 = ORIENTED_EDGE('',*,*,#21154,.F.); +#22069 = PLANE('',#22070); +#22070 = AXIS2_PLACEMENT_3D('',#22071,#22072,#22073); +#22071 = CARTESIAN_POINT('',(-1.27,-8.636,0.)); +#22072 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#22073 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#22074 = ADVANCED_FACE('',(#22075),#22086,.F.); +#22075 = FACE_BOUND('',#22076,.F.); +#22076 = EDGE_LOOP('',(#22077,#22083,#22084,#22085)); +#22077 = ORIENTED_EDGE('',*,*,#22078,.T.); +#22078 = EDGE_CURVE('',#21171,#21500,#22079,.T.); +#22079 = LINE('',#22080,#22081); +#22080 = CARTESIAN_POINT('',(1.27,-8.636,0.)); +#22081 = VECTOR('',#22082,1.); +#22082 = DIRECTION('',(0.,0.,1.)); +#22083 = ORIENTED_EDGE('',*,*,#21507,.T.); +#22084 = ORIENTED_EDGE('',*,*,#22044,.F.); +#22085 = ORIENTED_EDGE('',*,*,#21178,.F.); +#22086 = PLANE('',#22087); +#22087 = AXIS2_PLACEMENT_3D('',#22088,#22089,#22090); +#22088 = CARTESIAN_POINT('',(1.27,-8.636,0.)); +#22089 = DIRECTION('',(-1.,0.,0.)); +#22090 = DIRECTION('',(0.,1.,0.)); +#22091 = ADVANCED_FACE('',(#22092),#22103,.F.); +#22092 = FACE_BOUND('',#22093,.F.); +#22093 = EDGE_LOOP('',(#22094,#22095,#22096,#22102)); +#22094 = ORIENTED_EDGE('',*,*,#22063,.T.); +#22095 = ORIENTED_EDGE('',*,*,#21491,.T.); +#22096 = ORIENTED_EDGE('',*,*,#22097,.F.); +#22097 = EDGE_CURVE('',#21163,#21492,#22098,.T.); +#22098 = LINE('',#22099,#22100); +#22099 = CARTESIAN_POINT('',(1.016,-8.89,0.)); +#22100 = VECTOR('',#22101,1.); +#22101 = DIRECTION('',(0.,0.,1.)); +#22102 = ORIENTED_EDGE('',*,*,#21162,.F.); +#22103 = PLANE('',#22104); +#22104 = AXIS2_PLACEMENT_3D('',#22105,#22106,#22107); +#22105 = CARTESIAN_POINT('',(-1.016,-8.89,0.)); +#22106 = DIRECTION('',(0.,1.,0.)); +#22107 = DIRECTION('',(1.,0.,0.)); +#22108 = ADVANCED_FACE('',(#22109),#22115,.F.); +#22109 = FACE_BOUND('',#22110,.F.); +#22110 = EDGE_LOOP('',(#22111,#22112,#22113,#22114)); +#22111 = ORIENTED_EDGE('',*,*,#22097,.T.); +#22112 = ORIENTED_EDGE('',*,*,#21499,.T.); +#22113 = ORIENTED_EDGE('',*,*,#22078,.F.); +#22114 = ORIENTED_EDGE('',*,*,#21170,.F.); +#22115 = PLANE('',#22116); +#22116 = AXIS2_PLACEMENT_3D('',#22117,#22118,#22119); +#22117 = CARTESIAN_POINT('',(1.016,-8.89,0.)); +#22118 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#22119 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#22120 = ADVANCED_FACE('',(#22121),#22146,.T.); +#22121 = FACE_BOUND('',#22122,.T.); +#22122 = EDGE_LOOP('',(#22123,#22131,#22139,#22145)); +#22123 = ORIENTED_EDGE('',*,*,#22124,.F.); +#22124 = EDGE_CURVE('',#22125,#21268,#22127,.T.); +#22125 = VERTEX_POINT('',#22126); +#22126 = CARTESIAN_POINT('',(0.32,-4.76,-2.84)); +#22127 = LINE('',#22128,#22129); +#22128 = CARTESIAN_POINT('',(0.32,-4.76,-3.)); +#22129 = VECTOR('',#22130,1.); +#22130 = DIRECTION('',(0.,0.,1.)); +#22131 = ORIENTED_EDGE('',*,*,#22132,.F.); +#22132 = EDGE_CURVE('',#22133,#22125,#22135,.T.); +#22133 = VERTEX_POINT('',#22134); +#22134 = CARTESIAN_POINT('',(-0.32,-4.76,-2.84)); +#22135 = LINE('',#22136,#22137); +#22136 = CARTESIAN_POINT('',(-0.32,-4.76,-2.84)); +#22137 = VECTOR('',#22138,1.); +#22138 = DIRECTION('',(1.,0.,0.)); +#22139 = ORIENTED_EDGE('',*,*,#22140,.T.); +#22140 = EDGE_CURVE('',#22133,#21270,#22141,.T.); +#22141 = LINE('',#22142,#22143); +#22142 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#22143 = VECTOR('',#22144,1.); +#22144 = DIRECTION('',(0.,0.,1.)); +#22145 = ORIENTED_EDGE('',*,*,#21267,.F.); +#22146 = PLANE('',#22147); +#22147 = AXIS2_PLACEMENT_3D('',#22148,#22149,#22150); +#22148 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#22149 = DIRECTION('',(0.,1.,0.)); +#22150 = DIRECTION('',(0.,-0.,1.)); +#22151 = ADVANCED_FACE('',(#22152),#22170,.F.); +#22152 = FACE_BOUND('',#22153,.F.); +#22153 = EDGE_LOOP('',(#22154,#22162,#22168,#22169)); +#22154 = ORIENTED_EDGE('',*,*,#22155,.F.); +#22155 = EDGE_CURVE('',#22156,#21286,#22158,.T.); +#22156 = VERTEX_POINT('',#22157); +#22157 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#22158 = LINE('',#22159,#22160); +#22159 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#22160 = VECTOR('',#22161,1.); +#22161 = DIRECTION('',(0.,0.,1.)); +#22162 = ORIENTED_EDGE('',*,*,#22163,.T.); +#22163 = EDGE_CURVE('',#22156,#22133,#22164,.T.); +#22164 = LINE('',#22165,#22166); +#22165 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#22166 = VECTOR('',#22167,1.); +#22167 = DIRECTION('',(0.,1.,0.)); +#22168 = ORIENTED_EDGE('',*,*,#22140,.T.); +#22169 = ORIENTED_EDGE('',*,*,#21293,.F.); +#22170 = PLANE('',#22171); +#22171 = AXIS2_PLACEMENT_3D('',#22172,#22173,#22174); +#22172 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#22173 = DIRECTION('',(1.,0.,0.)); +#22174 = DIRECTION('',(0.,0.,1.)); +#22175 = ADVANCED_FACE('',(#22176),#22194,.F.); +#22176 = FACE_BOUND('',#22177,.F.); +#22177 = EDGE_LOOP('',(#22178,#22186,#22192,#22193)); +#22178 = ORIENTED_EDGE('',*,*,#22179,.F.); +#22179 = EDGE_CURVE('',#22180,#21278,#22182,.T.); +#22180 = VERTEX_POINT('',#22181); +#22181 = CARTESIAN_POINT('',(0.32,-5.4,-2.84)); +#22182 = LINE('',#22183,#22184); +#22183 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#22184 = VECTOR('',#22185,1.); +#22185 = DIRECTION('',(0.,0.,1.)); +#22186 = ORIENTED_EDGE('',*,*,#22187,.F.); +#22187 = EDGE_CURVE('',#22156,#22180,#22188,.T.); +#22188 = LINE('',#22189,#22190); +#22189 = CARTESIAN_POINT('',(-0.32,-5.4,-2.84)); +#22190 = VECTOR('',#22191,1.); +#22191 = DIRECTION('',(1.,0.,0.)); +#22192 = ORIENTED_EDGE('',*,*,#22155,.T.); +#22193 = ORIENTED_EDGE('',*,*,#21285,.F.); +#22194 = PLANE('',#22195); +#22195 = AXIS2_PLACEMENT_3D('',#22196,#22197,#22198); +#22196 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#22197 = DIRECTION('',(0.,1.,0.)); +#22198 = DIRECTION('',(0.,-0.,1.)); +#22199 = ADVANCED_FACE('',(#22200),#22211,.T.); +#22200 = FACE_BOUND('',#22201,.T.); +#22201 = EDGE_LOOP('',(#22202,#22203,#22209,#22210)); +#22202 = ORIENTED_EDGE('',*,*,#22179,.F.); +#22203 = ORIENTED_EDGE('',*,*,#22204,.T.); +#22204 = EDGE_CURVE('',#22180,#22125,#22205,.T.); +#22205 = LINE('',#22206,#22207); +#22206 = CARTESIAN_POINT('',(0.32,-5.4,-2.84)); +#22207 = VECTOR('',#22208,1.); +#22208 = DIRECTION('',(0.,1.,0.)); +#22209 = ORIENTED_EDGE('',*,*,#22124,.T.); +#22210 = ORIENTED_EDGE('',*,*,#21277,.F.); +#22211 = PLANE('',#22212); +#22212 = AXIS2_PLACEMENT_3D('',#22213,#22214,#22215); +#22213 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#22214 = DIRECTION('',(1.,0.,0.)); +#22215 = DIRECTION('',(0.,0.,1.)); +#22216 = ADVANCED_FACE('',(#22217),#22242,.T.); +#22217 = FACE_BOUND('',#22218,.T.); +#22218 = EDGE_LOOP('',(#22219,#22227,#22235,#22241)); +#22219 = ORIENTED_EDGE('',*,*,#22220,.F.); +#22220 = EDGE_CURVE('',#22221,#21302,#22223,.T.); +#22221 = VERTEX_POINT('',#22222); +#22222 = CARTESIAN_POINT('',(0.32,-7.94,-2.84)); +#22223 = LINE('',#22224,#22225); +#22224 = CARTESIAN_POINT('',(0.32,-7.94,-3.)); +#22225 = VECTOR('',#22226,1.); +#22226 = DIRECTION('',(0.,0.,1.)); +#22227 = ORIENTED_EDGE('',*,*,#22228,.T.); +#22228 = EDGE_CURVE('',#22221,#22229,#22231,.T.); +#22229 = VERTEX_POINT('',#22230); +#22230 = CARTESIAN_POINT('',(0.32,-7.3,-2.84)); +#22231 = LINE('',#22232,#22233); +#22232 = CARTESIAN_POINT('',(0.32,-7.94,-2.84)); +#22233 = VECTOR('',#22234,1.); +#22234 = DIRECTION('',(0.,1.,0.)); +#22235 = ORIENTED_EDGE('',*,*,#22236,.T.); +#22236 = EDGE_CURVE('',#22229,#21304,#22237,.T.); +#22237 = LINE('',#22238,#22239); +#22238 = CARTESIAN_POINT('',(0.32,-7.3,-3.)); +#22239 = VECTOR('',#22240,1.); +#22240 = DIRECTION('',(0.,0.,1.)); +#22241 = ORIENTED_EDGE('',*,*,#21301,.F.); +#22242 = PLANE('',#22243); +#22243 = AXIS2_PLACEMENT_3D('',#22244,#22245,#22246); +#22244 = CARTESIAN_POINT('',(0.32,-7.94,-3.)); +#22245 = DIRECTION('',(1.,0.,0.)); +#22246 = DIRECTION('',(0.,0.,1.)); +#22247 = ADVANCED_FACE('',(#22248),#22266,.T.); +#22248 = FACE_BOUND('',#22249,.T.); +#22249 = EDGE_LOOP('',(#22250,#22251,#22259,#22265)); +#22250 = ORIENTED_EDGE('',*,*,#22236,.F.); +#22251 = ORIENTED_EDGE('',*,*,#22252,.F.); +#22252 = EDGE_CURVE('',#22253,#22229,#22255,.T.); +#22253 = VERTEX_POINT('',#22254); +#22254 = CARTESIAN_POINT('',(-0.32,-7.3,-2.84)); +#22255 = LINE('',#22256,#22257); +#22256 = CARTESIAN_POINT('',(-0.32,-7.3,-2.84)); +#22257 = VECTOR('',#22258,1.); +#22258 = DIRECTION('',(1.,0.,0.)); +#22259 = ORIENTED_EDGE('',*,*,#22260,.T.); +#22260 = EDGE_CURVE('',#22253,#21320,#22261,.T.); +#22261 = LINE('',#22262,#22263); +#22262 = CARTESIAN_POINT('',(-0.32,-7.3,-3.)); +#22263 = VECTOR('',#22264,1.); +#22264 = DIRECTION('',(0.,0.,1.)); +#22265 = ORIENTED_EDGE('',*,*,#21327,.F.); +#22266 = PLANE('',#22267); +#22267 = AXIS2_PLACEMENT_3D('',#22268,#22269,#22270); +#22268 = CARTESIAN_POINT('',(-0.32,-7.3,-3.)); +#22269 = DIRECTION('',(0.,1.,0.)); +#22270 = DIRECTION('',(0.,-0.,1.)); +#22271 = ADVANCED_FACE('',(#22272),#22290,.F.); +#22272 = FACE_BOUND('',#22273,.F.); +#22273 = EDGE_LOOP('',(#22274,#22282,#22288,#22289)); +#22274 = ORIENTED_EDGE('',*,*,#22275,.F.); +#22275 = EDGE_CURVE('',#22276,#21312,#22278,.T.); +#22276 = VERTEX_POINT('',#22277); +#22277 = CARTESIAN_POINT('',(-0.32,-7.94,-2.84)); +#22278 = LINE('',#22279,#22280); +#22279 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#22280 = VECTOR('',#22281,1.); +#22281 = DIRECTION('',(0.,0.,1.)); +#22282 = ORIENTED_EDGE('',*,*,#22283,.T.); +#22283 = EDGE_CURVE('',#22276,#22253,#22284,.T.); +#22284 = LINE('',#22285,#22286); +#22285 = CARTESIAN_POINT('',(-0.32,-7.94,-2.84)); +#22286 = VECTOR('',#22287,1.); +#22287 = DIRECTION('',(0.,1.,0.)); +#22288 = ORIENTED_EDGE('',*,*,#22260,.T.); +#22289 = ORIENTED_EDGE('',*,*,#21319,.F.); +#22290 = PLANE('',#22291); +#22291 = AXIS2_PLACEMENT_3D('',#22292,#22293,#22294); +#22292 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#22293 = DIRECTION('',(1.,0.,0.)); +#22294 = DIRECTION('',(0.,0.,1.)); +#22295 = ADVANCED_FACE('',(#22296),#22307,.F.); +#22296 = FACE_BOUND('',#22297,.F.); +#22297 = EDGE_LOOP('',(#22298,#22299,#22305,#22306)); +#22298 = ORIENTED_EDGE('',*,*,#22220,.F.); +#22299 = ORIENTED_EDGE('',*,*,#22300,.F.); +#22300 = EDGE_CURVE('',#22276,#22221,#22301,.T.); +#22301 = LINE('',#22302,#22303); +#22302 = CARTESIAN_POINT('',(-0.32,-7.94,-2.84)); +#22303 = VECTOR('',#22304,1.); +#22304 = DIRECTION('',(1.,0.,0.)); +#22305 = ORIENTED_EDGE('',*,*,#22275,.T.); +#22306 = ORIENTED_EDGE('',*,*,#21311,.F.); +#22307 = PLANE('',#22308); +#22308 = AXIS2_PLACEMENT_3D('',#22309,#22310,#22311); +#22309 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#22310 = DIRECTION('',(0.,1.,0.)); +#22311 = DIRECTION('',(0.,-0.,1.)); +#22312 = ADVANCED_FACE('',(#22313),#22338,.T.); +#22313 = FACE_BOUND('',#22314,.T.); +#22314 = EDGE_LOOP('',(#22315,#22323,#22331,#22337)); +#22315 = ORIENTED_EDGE('',*,*,#22316,.F.); +#22316 = EDGE_CURVE('',#22317,#21336,#22319,.T.); +#22317 = VERTEX_POINT('',#22318); +#22318 = CARTESIAN_POINT('',(0.32,-0.32,-2.84)); +#22319 = LINE('',#22320,#22321); +#22320 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#22321 = VECTOR('',#22322,1.); +#22322 = DIRECTION('',(0.,0.,1.)); +#22323 = ORIENTED_EDGE('',*,*,#22324,.T.); +#22324 = EDGE_CURVE('',#22317,#22325,#22327,.T.); +#22325 = VERTEX_POINT('',#22326); +#22326 = CARTESIAN_POINT('',(0.32,0.32,-2.84)); +#22327 = LINE('',#22328,#22329); +#22328 = CARTESIAN_POINT('',(0.32,-0.32,-2.84)); +#22329 = VECTOR('',#22330,1.); +#22330 = DIRECTION('',(0.,1.,0.)); +#22331 = ORIENTED_EDGE('',*,*,#22332,.T.); +#22332 = EDGE_CURVE('',#22325,#21338,#22333,.T.); +#22333 = LINE('',#22334,#22335); +#22334 = CARTESIAN_POINT('',(0.32,0.32,-3.)); +#22335 = VECTOR('',#22336,1.); +#22336 = DIRECTION('',(0.,0.,1.)); +#22337 = ORIENTED_EDGE('',*,*,#21335,.F.); +#22338 = PLANE('',#22339); +#22339 = AXIS2_PLACEMENT_3D('',#22340,#22341,#22342); +#22340 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#22341 = DIRECTION('',(1.,0.,0.)); +#22342 = DIRECTION('',(0.,0.,1.)); +#22343 = ADVANCED_FACE('',(#22344),#22362,.T.); +#22344 = FACE_BOUND('',#22345,.T.); +#22345 = EDGE_LOOP('',(#22346,#22347,#22355,#22361)); +#22346 = ORIENTED_EDGE('',*,*,#22332,.F.); +#22347 = ORIENTED_EDGE('',*,*,#22348,.F.); +#22348 = EDGE_CURVE('',#22349,#22325,#22351,.T.); +#22349 = VERTEX_POINT('',#22350); +#22350 = CARTESIAN_POINT('',(-0.32,0.32,-2.84)); +#22351 = LINE('',#22352,#22353); +#22352 = CARTESIAN_POINT('',(-0.32,0.32,-2.84)); +#22353 = VECTOR('',#22354,1.); +#22354 = DIRECTION('',(1.,0.,0.)); +#22355 = ORIENTED_EDGE('',*,*,#22356,.T.); +#22356 = EDGE_CURVE('',#22349,#21354,#22357,.T.); +#22357 = LINE('',#22358,#22359); +#22358 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#22359 = VECTOR('',#22360,1.); +#22360 = DIRECTION('',(0.,0.,1.)); +#22361 = ORIENTED_EDGE('',*,*,#21361,.F.); +#22362 = PLANE('',#22363); +#22363 = AXIS2_PLACEMENT_3D('',#22364,#22365,#22366); +#22364 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#22365 = DIRECTION('',(0.,1.,0.)); +#22366 = DIRECTION('',(0.,-0.,1.)); +#22367 = ADVANCED_FACE('',(#22368),#22386,.F.); +#22368 = FACE_BOUND('',#22369,.F.); +#22369 = EDGE_LOOP('',(#22370,#22378,#22384,#22385)); +#22370 = ORIENTED_EDGE('',*,*,#22371,.F.); +#22371 = EDGE_CURVE('',#22372,#21346,#22374,.T.); +#22372 = VERTEX_POINT('',#22373); +#22373 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#22374 = LINE('',#22375,#22376); +#22375 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#22376 = VECTOR('',#22377,1.); +#22377 = DIRECTION('',(0.,0.,1.)); +#22378 = ORIENTED_EDGE('',*,*,#22379,.T.); +#22379 = EDGE_CURVE('',#22372,#22349,#22380,.T.); +#22380 = LINE('',#22381,#22382); +#22381 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#22382 = VECTOR('',#22383,1.); +#22383 = DIRECTION('',(0.,1.,0.)); +#22384 = ORIENTED_EDGE('',*,*,#22356,.T.); +#22385 = ORIENTED_EDGE('',*,*,#21353,.F.); +#22386 = PLANE('',#22387); +#22387 = AXIS2_PLACEMENT_3D('',#22388,#22389,#22390); +#22388 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#22389 = DIRECTION('',(1.,0.,0.)); +#22390 = DIRECTION('',(0.,0.,1.)); +#22391 = ADVANCED_FACE('',(#22392),#22403,.F.); +#22392 = FACE_BOUND('',#22393,.F.); +#22393 = EDGE_LOOP('',(#22394,#22395,#22401,#22402)); +#22394 = ORIENTED_EDGE('',*,*,#22316,.F.); +#22395 = ORIENTED_EDGE('',*,*,#22396,.F.); +#22396 = EDGE_CURVE('',#22372,#22317,#22397,.T.); +#22397 = LINE('',#22398,#22399); +#22398 = CARTESIAN_POINT('',(-0.32,-0.32,-2.84)); +#22399 = VECTOR('',#22400,1.); +#22400 = DIRECTION('',(1.,0.,0.)); +#22401 = ORIENTED_EDGE('',*,*,#22371,.T.); +#22402 = ORIENTED_EDGE('',*,*,#21345,.F.); +#22403 = PLANE('',#22404); +#22404 = AXIS2_PLACEMENT_3D('',#22405,#22406,#22407); +#22405 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#22406 = DIRECTION('',(0.,1.,0.)); +#22407 = DIRECTION('',(0.,-0.,1.)); +#22408 = ADVANCED_FACE('',(#22409),#22434,.T.); +#22409 = FACE_BOUND('',#22410,.T.); +#22410 = EDGE_LOOP('',(#22411,#22419,#22427,#22433)); +#22411 = ORIENTED_EDGE('',*,*,#22412,.F.); +#22412 = EDGE_CURVE('',#22413,#21370,#22415,.T.); +#22413 = VERTEX_POINT('',#22414); +#22414 = CARTESIAN_POINT('',(0.32,-2.22,-2.84)); +#22415 = LINE('',#22416,#22417); +#22416 = CARTESIAN_POINT('',(0.32,-2.22,-3.)); +#22417 = VECTOR('',#22418,1.); +#22418 = DIRECTION('',(0.,0.,1.)); +#22419 = ORIENTED_EDGE('',*,*,#22420,.F.); +#22420 = EDGE_CURVE('',#22421,#22413,#22423,.T.); +#22421 = VERTEX_POINT('',#22422); +#22422 = CARTESIAN_POINT('',(-0.32,-2.22,-2.84)); +#22423 = LINE('',#22424,#22425); +#22424 = CARTESIAN_POINT('',(-0.32,-2.22,-2.84)); +#22425 = VECTOR('',#22426,1.); +#22426 = DIRECTION('',(1.,0.,0.)); +#22427 = ORIENTED_EDGE('',*,*,#22428,.T.); +#22428 = EDGE_CURVE('',#22421,#21372,#22429,.T.); +#22429 = LINE('',#22430,#22431); +#22430 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#22431 = VECTOR('',#22432,1.); +#22432 = DIRECTION('',(0.,0.,1.)); +#22433 = ORIENTED_EDGE('',*,*,#21369,.F.); +#22434 = PLANE('',#22435); +#22435 = AXIS2_PLACEMENT_3D('',#22436,#22437,#22438); +#22436 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#22437 = DIRECTION('',(0.,1.,0.)); +#22438 = DIRECTION('',(0.,-0.,1.)); +#22439 = ADVANCED_FACE('',(#22440),#22458,.F.); +#22440 = FACE_BOUND('',#22441,.F.); +#22441 = EDGE_LOOP('',(#22442,#22450,#22456,#22457)); +#22442 = ORIENTED_EDGE('',*,*,#22443,.F.); +#22443 = EDGE_CURVE('',#22444,#21388,#22446,.T.); +#22444 = VERTEX_POINT('',#22445); +#22445 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#22446 = LINE('',#22447,#22448); +#22447 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#22448 = VECTOR('',#22449,1.); +#22449 = DIRECTION('',(0.,0.,1.)); +#22450 = ORIENTED_EDGE('',*,*,#22451,.T.); +#22451 = EDGE_CURVE('',#22444,#22421,#22452,.T.); +#22452 = LINE('',#22453,#22454); +#22453 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#22454 = VECTOR('',#22455,1.); +#22455 = DIRECTION('',(0.,1.,0.)); +#22456 = ORIENTED_EDGE('',*,*,#22428,.T.); +#22457 = ORIENTED_EDGE('',*,*,#21395,.F.); +#22458 = PLANE('',#22459); +#22459 = AXIS2_PLACEMENT_3D('',#22460,#22461,#22462); +#22460 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#22461 = DIRECTION('',(1.,0.,0.)); +#22462 = DIRECTION('',(0.,0.,1.)); +#22463 = ADVANCED_FACE('',(#22464),#22482,.F.); +#22464 = FACE_BOUND('',#22465,.F.); +#22465 = EDGE_LOOP('',(#22466,#22474,#22480,#22481)); +#22466 = ORIENTED_EDGE('',*,*,#22467,.F.); +#22467 = EDGE_CURVE('',#22468,#21380,#22470,.T.); +#22468 = VERTEX_POINT('',#22469); +#22469 = CARTESIAN_POINT('',(0.32,-2.86,-2.84)); +#22470 = LINE('',#22471,#22472); +#22471 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#22472 = VECTOR('',#22473,1.); +#22473 = DIRECTION('',(0.,0.,1.)); +#22474 = ORIENTED_EDGE('',*,*,#22475,.F.); +#22475 = EDGE_CURVE('',#22444,#22468,#22476,.T.); +#22476 = LINE('',#22477,#22478); +#22477 = CARTESIAN_POINT('',(-0.32,-2.86,-2.84)); +#22478 = VECTOR('',#22479,1.); +#22479 = DIRECTION('',(1.,0.,0.)); +#22480 = ORIENTED_EDGE('',*,*,#22443,.T.); +#22481 = ORIENTED_EDGE('',*,*,#21387,.F.); +#22482 = PLANE('',#22483); +#22483 = AXIS2_PLACEMENT_3D('',#22484,#22485,#22486); +#22484 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#22485 = DIRECTION('',(0.,1.,0.)); +#22486 = DIRECTION('',(0.,-0.,1.)); +#22487 = ADVANCED_FACE('',(#22488),#22499,.T.); +#22488 = FACE_BOUND('',#22489,.T.); +#22489 = EDGE_LOOP('',(#22490,#22491,#22497,#22498)); +#22490 = ORIENTED_EDGE('',*,*,#22467,.F.); +#22491 = ORIENTED_EDGE('',*,*,#22492,.T.); +#22492 = EDGE_CURVE('',#22468,#22413,#22493,.T.); +#22493 = LINE('',#22494,#22495); +#22494 = CARTESIAN_POINT('',(0.32,-2.86,-2.84)); +#22495 = VECTOR('',#22496,1.); +#22496 = DIRECTION('',(0.,1.,0.)); +#22497 = ORIENTED_EDGE('',*,*,#22412,.T.); +#22498 = ORIENTED_EDGE('',*,*,#21379,.F.); +#22499 = PLANE('',#22500); +#22500 = AXIS2_PLACEMENT_3D('',#22501,#22502,#22503); +#22501 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#22502 = DIRECTION('',(1.,0.,0.)); +#22503 = DIRECTION('',(0.,0.,1.)); +#22504 = ADVANCED_FACE('',(#22505),#22530,.T.); +#22505 = FACE_BOUND('',#22506,.T.); +#22506 = EDGE_LOOP('',(#22507,#22515,#22516,#22524)); +#22507 = ORIENTED_EDGE('',*,*,#22508,.F.); +#22508 = EDGE_CURVE('',#21597,#22509,#22511,.T.); +#22509 = VERTEX_POINT('',#22510); +#22510 = CARTESIAN_POINT('',(0.32,-4.76,8.38)); +#22511 = LINE('',#22512,#22513); +#22512 = CARTESIAN_POINT('',(0.32,-4.76,-3.)); +#22513 = VECTOR('',#22514,1.); +#22514 = DIRECTION('',(0.,0.,1.)); +#22515 = ORIENTED_EDGE('',*,*,#21596,.T.); +#22516 = ORIENTED_EDGE('',*,*,#22517,.T.); +#22517 = EDGE_CURVE('',#21599,#22518,#22520,.T.); +#22518 = VERTEX_POINT('',#22519); +#22519 = CARTESIAN_POINT('',(-0.32,-4.76,8.38)); +#22520 = LINE('',#22521,#22522); +#22521 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#22522 = VECTOR('',#22523,1.); +#22523 = DIRECTION('',(0.,0.,1.)); +#22524 = ORIENTED_EDGE('',*,*,#22525,.T.); +#22525 = EDGE_CURVE('',#22518,#22509,#22526,.T.); +#22526 = LINE('',#22527,#22528); +#22527 = CARTESIAN_POINT('',(-0.32,-4.76,8.38)); +#22528 = VECTOR('',#22529,1.); +#22529 = DIRECTION('',(1.,0.,0.)); +#22530 = PLANE('',#22531); +#22531 = AXIS2_PLACEMENT_3D('',#22532,#22533,#22534); +#22532 = CARTESIAN_POINT('',(-0.32,-4.76,-3.)); +#22533 = DIRECTION('',(0.,1.,0.)); +#22534 = DIRECTION('',(0.,-0.,1.)); +#22535 = ADVANCED_FACE('',(#22536),#22554,.F.); +#22536 = FACE_BOUND('',#22537,.F.); +#22537 = EDGE_LOOP('',(#22538,#22546,#22547,#22548)); +#22538 = ORIENTED_EDGE('',*,*,#22539,.F.); +#22539 = EDGE_CURVE('',#21615,#22540,#22542,.T.); +#22540 = VERTEX_POINT('',#22541); +#22541 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#22542 = LINE('',#22543,#22544); +#22543 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#22544 = VECTOR('',#22545,1.); +#22545 = DIRECTION('',(0.,0.,1.)); +#22546 = ORIENTED_EDGE('',*,*,#21622,.T.); +#22547 = ORIENTED_EDGE('',*,*,#22517,.T.); +#22548 = ORIENTED_EDGE('',*,*,#22549,.F.); +#22549 = EDGE_CURVE('',#22540,#22518,#22550,.T.); +#22550 = LINE('',#22551,#22552); +#22551 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#22552 = VECTOR('',#22553,1.); +#22553 = DIRECTION('',(0.,1.,0.)); +#22554 = PLANE('',#22555); +#22555 = AXIS2_PLACEMENT_3D('',#22556,#22557,#22558); +#22556 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#22557 = DIRECTION('',(1.,0.,0.)); +#22558 = DIRECTION('',(0.,0.,1.)); +#22559 = ADVANCED_FACE('',(#22560),#22578,.F.); +#22560 = FACE_BOUND('',#22561,.F.); +#22561 = EDGE_LOOP('',(#22562,#22570,#22571,#22572)); +#22562 = ORIENTED_EDGE('',*,*,#22563,.F.); +#22563 = EDGE_CURVE('',#21607,#22564,#22566,.T.); +#22564 = VERTEX_POINT('',#22565); +#22565 = CARTESIAN_POINT('',(0.32,-5.4,8.38)); +#22566 = LINE('',#22567,#22568); +#22567 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#22568 = VECTOR('',#22569,1.); +#22569 = DIRECTION('',(0.,0.,1.)); +#22570 = ORIENTED_EDGE('',*,*,#21614,.T.); +#22571 = ORIENTED_EDGE('',*,*,#22539,.T.); +#22572 = ORIENTED_EDGE('',*,*,#22573,.T.); +#22573 = EDGE_CURVE('',#22540,#22564,#22574,.T.); +#22574 = LINE('',#22575,#22576); +#22575 = CARTESIAN_POINT('',(-0.32,-5.4,8.38)); +#22576 = VECTOR('',#22577,1.); +#22577 = DIRECTION('',(1.,0.,0.)); +#22578 = PLANE('',#22579); +#22579 = AXIS2_PLACEMENT_3D('',#22580,#22581,#22582); +#22580 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#22581 = DIRECTION('',(0.,1.,0.)); +#22582 = DIRECTION('',(0.,-0.,1.)); +#22583 = ADVANCED_FACE('',(#22584),#22595,.T.); +#22584 = FACE_BOUND('',#22585,.T.); +#22585 = EDGE_LOOP('',(#22586,#22587,#22588,#22589)); +#22586 = ORIENTED_EDGE('',*,*,#22563,.F.); +#22587 = ORIENTED_EDGE('',*,*,#21606,.T.); +#22588 = ORIENTED_EDGE('',*,*,#22508,.T.); +#22589 = ORIENTED_EDGE('',*,*,#22590,.F.); +#22590 = EDGE_CURVE('',#22564,#22509,#22591,.T.); +#22591 = LINE('',#22592,#22593); +#22592 = CARTESIAN_POINT('',(0.32,-5.4,8.38)); +#22593 = VECTOR('',#22594,1.); +#22594 = DIRECTION('',(0.,1.,0.)); +#22595 = PLANE('',#22596); +#22596 = AXIS2_PLACEMENT_3D('',#22597,#22598,#22599); +#22597 = CARTESIAN_POINT('',(0.32,-5.4,-3.)); +#22598 = DIRECTION('',(1.,0.,0.)); +#22599 = DIRECTION('',(0.,0.,1.)); +#22600 = ADVANCED_FACE('',(#22601),#22626,.T.); +#22601 = FACE_BOUND('',#22602,.T.); +#22602 = EDGE_LOOP('',(#22603,#22611,#22612,#22620)); +#22603 = ORIENTED_EDGE('',*,*,#22604,.F.); +#22604 = EDGE_CURVE('',#21631,#22605,#22607,.T.); +#22605 = VERTEX_POINT('',#22606); +#22606 = CARTESIAN_POINT('',(0.32,-7.94,8.38)); +#22607 = LINE('',#22608,#22609); +#22608 = CARTESIAN_POINT('',(0.32,-7.94,-3.)); +#22609 = VECTOR('',#22610,1.); +#22610 = DIRECTION('',(0.,0.,1.)); +#22611 = ORIENTED_EDGE('',*,*,#21630,.T.); +#22612 = ORIENTED_EDGE('',*,*,#22613,.T.); +#22613 = EDGE_CURVE('',#21633,#22614,#22616,.T.); +#22614 = VERTEX_POINT('',#22615); +#22615 = CARTESIAN_POINT('',(0.32,-7.3,8.38)); +#22616 = LINE('',#22617,#22618); +#22617 = CARTESIAN_POINT('',(0.32,-7.3,-3.)); +#22618 = VECTOR('',#22619,1.); +#22619 = DIRECTION('',(0.,0.,1.)); +#22620 = ORIENTED_EDGE('',*,*,#22621,.F.); +#22621 = EDGE_CURVE('',#22605,#22614,#22622,.T.); +#22622 = LINE('',#22623,#22624); +#22623 = CARTESIAN_POINT('',(0.32,-7.94,8.38)); +#22624 = VECTOR('',#22625,1.); +#22625 = DIRECTION('',(0.,1.,0.)); +#22626 = PLANE('',#22627); +#22627 = AXIS2_PLACEMENT_3D('',#22628,#22629,#22630); +#22628 = CARTESIAN_POINT('',(0.32,-7.94,-3.)); +#22629 = DIRECTION('',(1.,0.,0.)); +#22630 = DIRECTION('',(0.,0.,1.)); +#22631 = ADVANCED_FACE('',(#22632),#22650,.T.); +#22632 = FACE_BOUND('',#22633,.T.); +#22633 = EDGE_LOOP('',(#22634,#22635,#22636,#22644)); +#22634 = ORIENTED_EDGE('',*,*,#22613,.F.); +#22635 = ORIENTED_EDGE('',*,*,#21656,.T.); +#22636 = ORIENTED_EDGE('',*,*,#22637,.T.); +#22637 = EDGE_CURVE('',#21649,#22638,#22640,.T.); +#22638 = VERTEX_POINT('',#22639); +#22639 = CARTESIAN_POINT('',(-0.32,-7.3,8.38)); +#22640 = LINE('',#22641,#22642); +#22641 = CARTESIAN_POINT('',(-0.32,-7.3,-3.)); +#22642 = VECTOR('',#22643,1.); +#22643 = DIRECTION('',(0.,0.,1.)); +#22644 = ORIENTED_EDGE('',*,*,#22645,.T.); +#22645 = EDGE_CURVE('',#22638,#22614,#22646,.T.); +#22646 = LINE('',#22647,#22648); +#22647 = CARTESIAN_POINT('',(-0.32,-7.3,8.38)); +#22648 = VECTOR('',#22649,1.); +#22649 = DIRECTION('',(1.,0.,0.)); +#22650 = PLANE('',#22651); +#22651 = AXIS2_PLACEMENT_3D('',#22652,#22653,#22654); +#22652 = CARTESIAN_POINT('',(-0.32,-7.3,-3.)); +#22653 = DIRECTION('',(0.,1.,0.)); +#22654 = DIRECTION('',(0.,-0.,1.)); +#22655 = ADVANCED_FACE('',(#22656),#22674,.F.); +#22656 = FACE_BOUND('',#22657,.F.); +#22657 = EDGE_LOOP('',(#22658,#22666,#22667,#22668)); +#22658 = ORIENTED_EDGE('',*,*,#22659,.F.); +#22659 = EDGE_CURVE('',#21641,#22660,#22662,.T.); +#22660 = VERTEX_POINT('',#22661); +#22661 = CARTESIAN_POINT('',(-0.32,-7.94,8.38)); +#22662 = LINE('',#22663,#22664); +#22663 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#22664 = VECTOR('',#22665,1.); +#22665 = DIRECTION('',(0.,0.,1.)); +#22666 = ORIENTED_EDGE('',*,*,#21648,.T.); +#22667 = ORIENTED_EDGE('',*,*,#22637,.T.); +#22668 = ORIENTED_EDGE('',*,*,#22669,.F.); +#22669 = EDGE_CURVE('',#22660,#22638,#22670,.T.); +#22670 = LINE('',#22671,#22672); +#22671 = CARTESIAN_POINT('',(-0.32,-7.94,8.38)); +#22672 = VECTOR('',#22673,1.); +#22673 = DIRECTION('',(0.,1.,0.)); +#22674 = PLANE('',#22675); +#22675 = AXIS2_PLACEMENT_3D('',#22676,#22677,#22678); +#22676 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#22677 = DIRECTION('',(1.,0.,0.)); +#22678 = DIRECTION('',(0.,0.,1.)); +#22679 = ADVANCED_FACE('',(#22680),#22691,.F.); +#22680 = FACE_BOUND('',#22681,.F.); +#22681 = EDGE_LOOP('',(#22682,#22683,#22684,#22685)); +#22682 = ORIENTED_EDGE('',*,*,#22604,.F.); +#22683 = ORIENTED_EDGE('',*,*,#21640,.T.); +#22684 = ORIENTED_EDGE('',*,*,#22659,.T.); +#22685 = ORIENTED_EDGE('',*,*,#22686,.T.); +#22686 = EDGE_CURVE('',#22660,#22605,#22687,.T.); +#22687 = LINE('',#22688,#22689); +#22688 = CARTESIAN_POINT('',(-0.32,-7.94,8.38)); +#22689 = VECTOR('',#22690,1.); +#22690 = DIRECTION('',(1.,0.,0.)); +#22691 = PLANE('',#22692); +#22692 = AXIS2_PLACEMENT_3D('',#22693,#22694,#22695); +#22693 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#22694 = DIRECTION('',(0.,1.,0.)); +#22695 = DIRECTION('',(0.,-0.,1.)); +#22696 = ADVANCED_FACE('',(#22697),#22722,.T.); +#22697 = FACE_BOUND('',#22698,.T.); +#22698 = EDGE_LOOP('',(#22699,#22707,#22708,#22716)); +#22699 = ORIENTED_EDGE('',*,*,#22700,.F.); +#22700 = EDGE_CURVE('',#21665,#22701,#22703,.T.); +#22701 = VERTEX_POINT('',#22702); +#22702 = CARTESIAN_POINT('',(0.32,-0.32,8.38)); +#22703 = LINE('',#22704,#22705); +#22704 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#22705 = VECTOR('',#22706,1.); +#22706 = DIRECTION('',(0.,0.,1.)); +#22707 = ORIENTED_EDGE('',*,*,#21664,.T.); +#22708 = ORIENTED_EDGE('',*,*,#22709,.T.); +#22709 = EDGE_CURVE('',#21667,#22710,#22712,.T.); +#22710 = VERTEX_POINT('',#22711); +#22711 = CARTESIAN_POINT('',(0.32,0.32,8.38)); +#22712 = LINE('',#22713,#22714); +#22713 = CARTESIAN_POINT('',(0.32,0.32,-3.)); +#22714 = VECTOR('',#22715,1.); +#22715 = DIRECTION('',(0.,0.,1.)); +#22716 = ORIENTED_EDGE('',*,*,#22717,.F.); +#22717 = EDGE_CURVE('',#22701,#22710,#22718,.T.); +#22718 = LINE('',#22719,#22720); +#22719 = CARTESIAN_POINT('',(0.32,-0.32,8.38)); +#22720 = VECTOR('',#22721,1.); +#22721 = DIRECTION('',(0.,1.,0.)); +#22722 = PLANE('',#22723); +#22723 = AXIS2_PLACEMENT_3D('',#22724,#22725,#22726); +#22724 = CARTESIAN_POINT('',(0.32,-0.32,-3.)); +#22725 = DIRECTION('',(1.,0.,0.)); +#22726 = DIRECTION('',(0.,0.,1.)); +#22727 = ADVANCED_FACE('',(#22728),#22746,.T.); +#22728 = FACE_BOUND('',#22729,.T.); +#22729 = EDGE_LOOP('',(#22730,#22731,#22732,#22740)); +#22730 = ORIENTED_EDGE('',*,*,#22709,.F.); +#22731 = ORIENTED_EDGE('',*,*,#21690,.T.); +#22732 = ORIENTED_EDGE('',*,*,#22733,.T.); +#22733 = EDGE_CURVE('',#21683,#22734,#22736,.T.); +#22734 = VERTEX_POINT('',#22735); +#22735 = CARTESIAN_POINT('',(-0.32,0.32,8.38)); +#22736 = LINE('',#22737,#22738); +#22737 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#22738 = VECTOR('',#22739,1.); +#22739 = DIRECTION('',(0.,0.,1.)); +#22740 = ORIENTED_EDGE('',*,*,#22741,.T.); +#22741 = EDGE_CURVE('',#22734,#22710,#22742,.T.); +#22742 = LINE('',#22743,#22744); +#22743 = CARTESIAN_POINT('',(-0.32,0.32,8.38)); +#22744 = VECTOR('',#22745,1.); +#22745 = DIRECTION('',(1.,0.,0.)); +#22746 = PLANE('',#22747); +#22747 = AXIS2_PLACEMENT_3D('',#22748,#22749,#22750); +#22748 = CARTESIAN_POINT('',(-0.32,0.32,-3.)); +#22749 = DIRECTION('',(0.,1.,0.)); +#22750 = DIRECTION('',(0.,-0.,1.)); +#22751 = ADVANCED_FACE('',(#22752),#22770,.F.); +#22752 = FACE_BOUND('',#22753,.F.); +#22753 = EDGE_LOOP('',(#22754,#22762,#22763,#22764)); +#22754 = ORIENTED_EDGE('',*,*,#22755,.F.); +#22755 = EDGE_CURVE('',#21675,#22756,#22758,.T.); +#22756 = VERTEX_POINT('',#22757); +#22757 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#22758 = LINE('',#22759,#22760); +#22759 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#22760 = VECTOR('',#22761,1.); +#22761 = DIRECTION('',(0.,0.,1.)); +#22762 = ORIENTED_EDGE('',*,*,#21682,.T.); +#22763 = ORIENTED_EDGE('',*,*,#22733,.T.); +#22764 = ORIENTED_EDGE('',*,*,#22765,.F.); +#22765 = EDGE_CURVE('',#22756,#22734,#22766,.T.); +#22766 = LINE('',#22767,#22768); +#22767 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#22768 = VECTOR('',#22769,1.); +#22769 = DIRECTION('',(0.,1.,0.)); +#22770 = PLANE('',#22771); +#22771 = AXIS2_PLACEMENT_3D('',#22772,#22773,#22774); +#22772 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#22773 = DIRECTION('',(1.,0.,0.)); +#22774 = DIRECTION('',(0.,0.,1.)); +#22775 = ADVANCED_FACE('',(#22776),#22787,.F.); +#22776 = FACE_BOUND('',#22777,.F.); +#22777 = EDGE_LOOP('',(#22778,#22779,#22780,#22781)); +#22778 = ORIENTED_EDGE('',*,*,#22700,.F.); +#22779 = ORIENTED_EDGE('',*,*,#21674,.T.); +#22780 = ORIENTED_EDGE('',*,*,#22755,.T.); +#22781 = ORIENTED_EDGE('',*,*,#22782,.T.); +#22782 = EDGE_CURVE('',#22756,#22701,#22783,.T.); +#22783 = LINE('',#22784,#22785); +#22784 = CARTESIAN_POINT('',(-0.32,-0.32,8.38)); +#22785 = VECTOR('',#22786,1.); +#22786 = DIRECTION('',(1.,0.,0.)); +#22787 = PLANE('',#22788); +#22788 = AXIS2_PLACEMENT_3D('',#22789,#22790,#22791); +#22789 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#22790 = DIRECTION('',(0.,1.,0.)); +#22791 = DIRECTION('',(0.,-0.,1.)); +#22792 = ADVANCED_FACE('',(#22793),#22818,.T.); +#22793 = FACE_BOUND('',#22794,.T.); +#22794 = EDGE_LOOP('',(#22795,#22803,#22804,#22812)); +#22795 = ORIENTED_EDGE('',*,*,#22796,.F.); +#22796 = EDGE_CURVE('',#21699,#22797,#22799,.T.); +#22797 = VERTEX_POINT('',#22798); +#22798 = CARTESIAN_POINT('',(0.32,-2.22,8.38)); +#22799 = LINE('',#22800,#22801); +#22800 = CARTESIAN_POINT('',(0.32,-2.22,-3.)); +#22801 = VECTOR('',#22802,1.); +#22802 = DIRECTION('',(0.,0.,1.)); +#22803 = ORIENTED_EDGE('',*,*,#21698,.T.); +#22804 = ORIENTED_EDGE('',*,*,#22805,.T.); +#22805 = EDGE_CURVE('',#21701,#22806,#22808,.T.); +#22806 = VERTEX_POINT('',#22807); +#22807 = CARTESIAN_POINT('',(-0.32,-2.22,8.38)); +#22808 = LINE('',#22809,#22810); +#22809 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#22810 = VECTOR('',#22811,1.); +#22811 = DIRECTION('',(0.,0.,1.)); +#22812 = ORIENTED_EDGE('',*,*,#22813,.T.); +#22813 = EDGE_CURVE('',#22806,#22797,#22814,.T.); +#22814 = LINE('',#22815,#22816); +#22815 = CARTESIAN_POINT('',(-0.32,-2.22,8.38)); +#22816 = VECTOR('',#22817,1.); +#22817 = DIRECTION('',(1.,0.,0.)); +#22818 = PLANE('',#22819); +#22819 = AXIS2_PLACEMENT_3D('',#22820,#22821,#22822); +#22820 = CARTESIAN_POINT('',(-0.32,-2.22,-3.)); +#22821 = DIRECTION('',(0.,1.,0.)); +#22822 = DIRECTION('',(0.,-0.,1.)); +#22823 = ADVANCED_FACE('',(#22824),#22842,.F.); +#22824 = FACE_BOUND('',#22825,.F.); +#22825 = EDGE_LOOP('',(#22826,#22834,#22835,#22836)); +#22826 = ORIENTED_EDGE('',*,*,#22827,.F.); +#22827 = EDGE_CURVE('',#21717,#22828,#22830,.T.); +#22828 = VERTEX_POINT('',#22829); +#22829 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#22830 = LINE('',#22831,#22832); +#22831 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#22832 = VECTOR('',#22833,1.); +#22833 = DIRECTION('',(0.,0.,1.)); +#22834 = ORIENTED_EDGE('',*,*,#21724,.T.); +#22835 = ORIENTED_EDGE('',*,*,#22805,.T.); +#22836 = ORIENTED_EDGE('',*,*,#22837,.F.); +#22837 = EDGE_CURVE('',#22828,#22806,#22838,.T.); +#22838 = LINE('',#22839,#22840); +#22839 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#22840 = VECTOR('',#22841,1.); +#22841 = DIRECTION('',(0.,1.,0.)); +#22842 = PLANE('',#22843); +#22843 = AXIS2_PLACEMENT_3D('',#22844,#22845,#22846); +#22844 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#22845 = DIRECTION('',(1.,0.,0.)); +#22846 = DIRECTION('',(0.,0.,1.)); +#22847 = ADVANCED_FACE('',(#22848),#22866,.F.); +#22848 = FACE_BOUND('',#22849,.F.); +#22849 = EDGE_LOOP('',(#22850,#22858,#22859,#22860)); +#22850 = ORIENTED_EDGE('',*,*,#22851,.F.); +#22851 = EDGE_CURVE('',#21709,#22852,#22854,.T.); +#22852 = VERTEX_POINT('',#22853); +#22853 = CARTESIAN_POINT('',(0.32,-2.86,8.38)); +#22854 = LINE('',#22855,#22856); +#22855 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#22856 = VECTOR('',#22857,1.); +#22857 = DIRECTION('',(0.,0.,1.)); +#22858 = ORIENTED_EDGE('',*,*,#21716,.T.); +#22859 = ORIENTED_EDGE('',*,*,#22827,.T.); +#22860 = ORIENTED_EDGE('',*,*,#22861,.T.); +#22861 = EDGE_CURVE('',#22828,#22852,#22862,.T.); +#22862 = LINE('',#22863,#22864); +#22863 = CARTESIAN_POINT('',(-0.32,-2.86,8.38)); +#22864 = VECTOR('',#22865,1.); +#22865 = DIRECTION('',(1.,0.,0.)); +#22866 = PLANE('',#22867); +#22867 = AXIS2_PLACEMENT_3D('',#22868,#22869,#22870); +#22868 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#22869 = DIRECTION('',(0.,1.,0.)); +#22870 = DIRECTION('',(0.,-0.,1.)); +#22871 = ADVANCED_FACE('',(#22872),#22883,.T.); +#22872 = FACE_BOUND('',#22873,.T.); +#22873 = EDGE_LOOP('',(#22874,#22875,#22876,#22877)); +#22874 = ORIENTED_EDGE('',*,*,#22851,.F.); +#22875 = ORIENTED_EDGE('',*,*,#21708,.T.); +#22876 = ORIENTED_EDGE('',*,*,#22796,.T.); +#22877 = ORIENTED_EDGE('',*,*,#22878,.F.); +#22878 = EDGE_CURVE('',#22852,#22797,#22879,.T.); +#22879 = LINE('',#22880,#22881); +#22880 = CARTESIAN_POINT('',(0.32,-2.86,8.38)); +#22881 = VECTOR('',#22882,1.); +#22882 = DIRECTION('',(0.,1.,0.)); +#22883 = PLANE('',#22884); +#22884 = AXIS2_PLACEMENT_3D('',#22885,#22886,#22887); +#22885 = CARTESIAN_POINT('',(0.32,-2.86,-3.)); +#22886 = DIRECTION('',(1.,0.,0.)); +#22887 = DIRECTION('',(0.,0.,1.)); +#22888 = ADVANCED_FACE('',(#22889),#22914,.F.); +#22889 = FACE_BOUND('',#22890,.T.); +#22890 = EDGE_LOOP('',(#22891,#22899,#22900,#22908)); +#22891 = ORIENTED_EDGE('',*,*,#22892,.F.); +#22892 = EDGE_CURVE('',#22133,#22893,#22895,.T.); +#22893 = VERTEX_POINT('',#22894); +#22894 = CARTESIAN_POINT('',(-0.16,-4.92,-3.)); +#22895 = LINE('',#22896,#22897); +#22896 = CARTESIAN_POINT('',(-0.16,-4.92,-3.)); +#22897 = VECTOR('',#22898,1.); +#22898 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#22899 = ORIENTED_EDGE('',*,*,#22132,.T.); +#22900 = ORIENTED_EDGE('',*,*,#22901,.T.); +#22901 = EDGE_CURVE('',#22125,#22902,#22904,.T.); +#22902 = VERTEX_POINT('',#22903); +#22903 = CARTESIAN_POINT('',(0.16,-4.92,-3.)); +#22904 = LINE('',#22905,#22906); +#22905 = CARTESIAN_POINT('',(5.333333333333E-02,-5.026666666667, + -3.106666666667)); +#22906 = VECTOR('',#22907,1.); +#22907 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#22908 = ORIENTED_EDGE('',*,*,#22909,.F.); +#22909 = EDGE_CURVE('',#22893,#22902,#22910,.T.); +#22910 = LINE('',#22911,#22912); +#22911 = CARTESIAN_POINT('',(-0.32,-4.92,-3.)); +#22912 = VECTOR('',#22913,1.); +#22913 = DIRECTION('',(1.,0.,0.)); +#22914 = PLANE('',#22915); +#22915 = AXIS2_PLACEMENT_3D('',#22916,#22917,#22918); +#22916 = CARTESIAN_POINT('',(-0.32,-4.84,-2.92)); +#22917 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#22918 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#22919 = ADVANCED_FACE('',(#22920),#22938,.T.); +#22920 = FACE_BOUND('',#22921,.T.); +#22921 = EDGE_LOOP('',(#22922,#22930,#22931,#22932)); +#22922 = ORIENTED_EDGE('',*,*,#22923,.F.); +#22923 = EDGE_CURVE('',#22156,#22924,#22926,.T.); +#22924 = VERTEX_POINT('',#22925); +#22925 = CARTESIAN_POINT('',(-0.16,-5.24,-3.)); +#22926 = LINE('',#22927,#22928); +#22927 = CARTESIAN_POINT('',(-0.266666666667,-5.346666666667, + -2.893333333333)); +#22928 = VECTOR('',#22929,1.); +#22929 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#22930 = ORIENTED_EDGE('',*,*,#22163,.T.); +#22931 = ORIENTED_EDGE('',*,*,#22892,.T.); +#22932 = ORIENTED_EDGE('',*,*,#22933,.F.); +#22933 = EDGE_CURVE('',#22924,#22893,#22934,.T.); +#22934 = LINE('',#22935,#22936); +#22935 = CARTESIAN_POINT('',(-0.16,-5.4,-3.)); +#22936 = VECTOR('',#22937,1.); +#22937 = DIRECTION('',(0.,1.,0.)); +#22938 = PLANE('',#22939); +#22939 = AXIS2_PLACEMENT_3D('',#22940,#22941,#22942); +#22940 = CARTESIAN_POINT('',(-0.24,-5.4,-2.92)); +#22941 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#22942 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#22943 = ADVANCED_FACE('',(#22944),#22962,.T.); +#22944 = FACE_BOUND('',#22945,.F.); +#22945 = EDGE_LOOP('',(#22946,#22947,#22948,#22956)); +#22946 = ORIENTED_EDGE('',*,*,#22923,.F.); +#22947 = ORIENTED_EDGE('',*,*,#22187,.T.); +#22948 = ORIENTED_EDGE('',*,*,#22949,.T.); +#22949 = EDGE_CURVE('',#22180,#22950,#22952,.T.); +#22950 = VERTEX_POINT('',#22951); +#22951 = CARTESIAN_POINT('',(0.16,-5.24,-3.)); +#22952 = LINE('',#22953,#22954); +#22953 = CARTESIAN_POINT('',(0.16,-5.24,-3.)); +#22954 = VECTOR('',#22955,1.); +#22955 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22956 = ORIENTED_EDGE('',*,*,#22957,.F.); +#22957 = EDGE_CURVE('',#22924,#22950,#22958,.T.); +#22958 = LINE('',#22959,#22960); +#22959 = CARTESIAN_POINT('',(-0.32,-5.24,-3.)); +#22960 = VECTOR('',#22961,1.); +#22961 = DIRECTION('',(1.,0.,0.)); +#22962 = PLANE('',#22963); +#22963 = AXIS2_PLACEMENT_3D('',#22964,#22965,#22966); +#22964 = CARTESIAN_POINT('',(-0.32,-5.32,-2.92)); +#22965 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#22966 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#22967 = ADVANCED_FACE('',(#22968),#22979,.F.); +#22968 = FACE_BOUND('',#22969,.F.); +#22969 = EDGE_LOOP('',(#22970,#22971,#22972,#22973)); +#22970 = ORIENTED_EDGE('',*,*,#22949,.F.); +#22971 = ORIENTED_EDGE('',*,*,#22204,.T.); +#22972 = ORIENTED_EDGE('',*,*,#22901,.T.); +#22973 = ORIENTED_EDGE('',*,*,#22974,.F.); +#22974 = EDGE_CURVE('',#22950,#22902,#22975,.T.); +#22975 = LINE('',#22976,#22977); +#22976 = CARTESIAN_POINT('',(0.16,-5.4,-3.)); +#22977 = VECTOR('',#22978,1.); +#22978 = DIRECTION('',(0.,1.,0.)); +#22979 = PLANE('',#22980); +#22980 = AXIS2_PLACEMENT_3D('',#22981,#22982,#22983); +#22981 = CARTESIAN_POINT('',(0.24,-5.4,-2.92)); +#22982 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#22983 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#22984 = ADVANCED_FACE('',(#22985),#23010,.F.); +#22985 = FACE_BOUND('',#22986,.F.); +#22986 = EDGE_LOOP('',(#22987,#22995,#22996,#23004)); +#22987 = ORIENTED_EDGE('',*,*,#22988,.F.); +#22988 = EDGE_CURVE('',#22221,#22989,#22991,.T.); +#22989 = VERTEX_POINT('',#22990); +#22990 = CARTESIAN_POINT('',(0.16,-7.78,-3.)); +#22991 = LINE('',#22992,#22993); +#22992 = CARTESIAN_POINT('',(0.16,-7.78,-3.)); +#22993 = VECTOR('',#22994,1.); +#22994 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#22995 = ORIENTED_EDGE('',*,*,#22228,.T.); +#22996 = ORIENTED_EDGE('',*,*,#22997,.T.); +#22997 = EDGE_CURVE('',#22229,#22998,#23000,.T.); +#22998 = VERTEX_POINT('',#22999); +#22999 = CARTESIAN_POINT('',(0.16,-7.46,-3.)); +#23000 = LINE('',#23001,#23002); +#23001 = CARTESIAN_POINT('',(5.333333333333E-02,-7.566666666667, + -3.106666666667)); +#23002 = VECTOR('',#23003,1.); +#23003 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23004 = ORIENTED_EDGE('',*,*,#23005,.F.); +#23005 = EDGE_CURVE('',#22989,#22998,#23006,.T.); +#23006 = LINE('',#23007,#23008); +#23007 = CARTESIAN_POINT('',(0.16,-7.94,-3.)); +#23008 = VECTOR('',#23009,1.); +#23009 = DIRECTION('',(0.,1.,0.)); +#23010 = PLANE('',#23011); +#23011 = AXIS2_PLACEMENT_3D('',#23012,#23013,#23014); +#23012 = CARTESIAN_POINT('',(0.24,-7.94,-2.92)); +#23013 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#23014 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#23015 = ADVANCED_FACE('',(#23016),#23034,.F.); +#23016 = FACE_BOUND('',#23017,.T.); +#23017 = EDGE_LOOP('',(#23018,#23026,#23027,#23028)); +#23018 = ORIENTED_EDGE('',*,*,#23019,.F.); +#23019 = EDGE_CURVE('',#22253,#23020,#23022,.T.); +#23020 = VERTEX_POINT('',#23021); +#23021 = CARTESIAN_POINT('',(-0.16,-7.46,-3.)); +#23022 = LINE('',#23023,#23024); +#23023 = CARTESIAN_POINT('',(-0.16,-7.46,-3.)); +#23024 = VECTOR('',#23025,1.); +#23025 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23026 = ORIENTED_EDGE('',*,*,#22252,.T.); +#23027 = ORIENTED_EDGE('',*,*,#22997,.T.); +#23028 = ORIENTED_EDGE('',*,*,#23029,.F.); +#23029 = EDGE_CURVE('',#23020,#22998,#23030,.T.); +#23030 = LINE('',#23031,#23032); +#23031 = CARTESIAN_POINT('',(-0.32,-7.46,-3.)); +#23032 = VECTOR('',#23033,1.); +#23033 = DIRECTION('',(1.,0.,0.)); +#23034 = PLANE('',#23035); +#23035 = AXIS2_PLACEMENT_3D('',#23036,#23037,#23038); +#23036 = CARTESIAN_POINT('',(-0.32,-7.38,-2.92)); +#23037 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#23038 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#23039 = ADVANCED_FACE('',(#23040),#23058,.T.); +#23040 = FACE_BOUND('',#23041,.T.); +#23041 = EDGE_LOOP('',(#23042,#23050,#23051,#23052)); +#23042 = ORIENTED_EDGE('',*,*,#23043,.F.); +#23043 = EDGE_CURVE('',#22276,#23044,#23046,.T.); +#23044 = VERTEX_POINT('',#23045); +#23045 = CARTESIAN_POINT('',(-0.16,-7.78,-3.)); +#23046 = LINE('',#23047,#23048); +#23047 = CARTESIAN_POINT('',(-0.266666666667,-7.886666666667, + -2.893333333333)); +#23048 = VECTOR('',#23049,1.); +#23049 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23050 = ORIENTED_EDGE('',*,*,#22283,.T.); +#23051 = ORIENTED_EDGE('',*,*,#23019,.T.); +#23052 = ORIENTED_EDGE('',*,*,#23053,.F.); +#23053 = EDGE_CURVE('',#23044,#23020,#23054,.T.); +#23054 = LINE('',#23055,#23056); +#23055 = CARTESIAN_POINT('',(-0.16,-7.94,-3.)); +#23056 = VECTOR('',#23057,1.); +#23057 = DIRECTION('',(0.,1.,0.)); +#23058 = PLANE('',#23059); +#23059 = AXIS2_PLACEMENT_3D('',#23060,#23061,#23062); +#23060 = CARTESIAN_POINT('',(-0.24,-7.94,-2.92)); +#23061 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#23062 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#23063 = ADVANCED_FACE('',(#23064),#23075,.T.); +#23064 = FACE_BOUND('',#23065,.F.); +#23065 = EDGE_LOOP('',(#23066,#23067,#23068,#23069)); +#23066 = ORIENTED_EDGE('',*,*,#23043,.F.); +#23067 = ORIENTED_EDGE('',*,*,#22300,.T.); +#23068 = ORIENTED_EDGE('',*,*,#22988,.T.); +#23069 = ORIENTED_EDGE('',*,*,#23070,.F.); +#23070 = EDGE_CURVE('',#23044,#22989,#23071,.T.); +#23071 = LINE('',#23072,#23073); +#23072 = CARTESIAN_POINT('',(-0.32,-7.78,-3.)); +#23073 = VECTOR('',#23074,1.); +#23074 = DIRECTION('',(1.,0.,0.)); +#23075 = PLANE('',#23076); +#23076 = AXIS2_PLACEMENT_3D('',#23077,#23078,#23079); +#23077 = CARTESIAN_POINT('',(-0.32,-7.86,-2.92)); +#23078 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#23079 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#23080 = ADVANCED_FACE('',(#23081),#23106,.F.); +#23081 = FACE_BOUND('',#23082,.F.); +#23082 = EDGE_LOOP('',(#23083,#23091,#23092,#23100)); +#23083 = ORIENTED_EDGE('',*,*,#23084,.F.); +#23084 = EDGE_CURVE('',#22317,#23085,#23087,.T.); +#23085 = VERTEX_POINT('',#23086); +#23086 = CARTESIAN_POINT('',(0.16,-0.16,-3.)); +#23087 = LINE('',#23088,#23089); +#23088 = CARTESIAN_POINT('',(0.16,-0.16,-3.)); +#23089 = VECTOR('',#23090,1.); +#23090 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23091 = ORIENTED_EDGE('',*,*,#22324,.T.); +#23092 = ORIENTED_EDGE('',*,*,#23093,.T.); +#23093 = EDGE_CURVE('',#22325,#23094,#23096,.T.); +#23094 = VERTEX_POINT('',#23095); +#23095 = CARTESIAN_POINT('',(0.16,0.16,-3.)); +#23096 = LINE('',#23097,#23098); +#23097 = CARTESIAN_POINT('',(5.333333333333E-02,5.333333333333E-02, + -3.106666666667)); +#23098 = VECTOR('',#23099,1.); +#23099 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23100 = ORIENTED_EDGE('',*,*,#23101,.F.); +#23101 = EDGE_CURVE('',#23085,#23094,#23102,.T.); +#23102 = LINE('',#23103,#23104); +#23103 = CARTESIAN_POINT('',(0.16,-0.32,-3.)); +#23104 = VECTOR('',#23105,1.); +#23105 = DIRECTION('',(0.,1.,0.)); +#23106 = PLANE('',#23107); +#23107 = AXIS2_PLACEMENT_3D('',#23108,#23109,#23110); +#23108 = CARTESIAN_POINT('',(0.24,-0.32,-2.92)); +#23109 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#23110 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#23111 = ADVANCED_FACE('',(#23112),#23130,.F.); +#23112 = FACE_BOUND('',#23113,.T.); +#23113 = EDGE_LOOP('',(#23114,#23122,#23123,#23124)); +#23114 = ORIENTED_EDGE('',*,*,#23115,.F.); +#23115 = EDGE_CURVE('',#22349,#23116,#23118,.T.); +#23116 = VERTEX_POINT('',#23117); +#23117 = CARTESIAN_POINT('',(-0.16,0.16,-3.)); +#23118 = LINE('',#23119,#23120); +#23119 = CARTESIAN_POINT('',(-0.16,0.16,-3.)); +#23120 = VECTOR('',#23121,1.); +#23121 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23122 = ORIENTED_EDGE('',*,*,#22348,.T.); +#23123 = ORIENTED_EDGE('',*,*,#23093,.T.); +#23124 = ORIENTED_EDGE('',*,*,#23125,.F.); +#23125 = EDGE_CURVE('',#23116,#23094,#23126,.T.); +#23126 = LINE('',#23127,#23128); +#23127 = CARTESIAN_POINT('',(-0.32,0.16,-3.)); +#23128 = VECTOR('',#23129,1.); +#23129 = DIRECTION('',(1.,0.,0.)); +#23130 = PLANE('',#23131); +#23131 = AXIS2_PLACEMENT_3D('',#23132,#23133,#23134); +#23132 = CARTESIAN_POINT('',(-0.32,0.24,-2.92)); +#23133 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#23134 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#23135 = ADVANCED_FACE('',(#23136),#23154,.T.); +#23136 = FACE_BOUND('',#23137,.T.); +#23137 = EDGE_LOOP('',(#23138,#23146,#23147,#23148)); +#23138 = ORIENTED_EDGE('',*,*,#23139,.F.); +#23139 = EDGE_CURVE('',#22372,#23140,#23142,.T.); +#23140 = VERTEX_POINT('',#23141); +#23141 = CARTESIAN_POINT('',(-0.16,-0.16,-3.)); +#23142 = LINE('',#23143,#23144); +#23143 = CARTESIAN_POINT('',(-0.266666666667,-0.266666666667, + -2.893333333333)); +#23144 = VECTOR('',#23145,1.); +#23145 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23146 = ORIENTED_EDGE('',*,*,#22379,.T.); +#23147 = ORIENTED_EDGE('',*,*,#23115,.T.); +#23148 = ORIENTED_EDGE('',*,*,#23149,.F.); +#23149 = EDGE_CURVE('',#23140,#23116,#23150,.T.); +#23150 = LINE('',#23151,#23152); +#23151 = CARTESIAN_POINT('',(-0.16,-0.32,-3.)); +#23152 = VECTOR('',#23153,1.); +#23153 = DIRECTION('',(0.,1.,0.)); +#23154 = PLANE('',#23155); +#23155 = AXIS2_PLACEMENT_3D('',#23156,#23157,#23158); +#23156 = CARTESIAN_POINT('',(-0.24,-0.32,-2.92)); +#23157 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#23158 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#23159 = ADVANCED_FACE('',(#23160),#23171,.T.); +#23160 = FACE_BOUND('',#23161,.F.); +#23161 = EDGE_LOOP('',(#23162,#23163,#23164,#23165)); +#23162 = ORIENTED_EDGE('',*,*,#23139,.F.); +#23163 = ORIENTED_EDGE('',*,*,#22396,.T.); +#23164 = ORIENTED_EDGE('',*,*,#23084,.T.); +#23165 = ORIENTED_EDGE('',*,*,#23166,.F.); +#23166 = EDGE_CURVE('',#23140,#23085,#23167,.T.); +#23167 = LINE('',#23168,#23169); +#23168 = CARTESIAN_POINT('',(-0.32,-0.16,-3.)); +#23169 = VECTOR('',#23170,1.); +#23170 = DIRECTION('',(1.,0.,0.)); +#23171 = PLANE('',#23172); +#23172 = AXIS2_PLACEMENT_3D('',#23173,#23174,#23175); +#23173 = CARTESIAN_POINT('',(-0.32,-0.24,-2.92)); +#23174 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#23175 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#23176 = ADVANCED_FACE('',(#23177),#23202,.F.); +#23177 = FACE_BOUND('',#23178,.T.); +#23178 = EDGE_LOOP('',(#23179,#23187,#23188,#23196)); +#23179 = ORIENTED_EDGE('',*,*,#23180,.F.); +#23180 = EDGE_CURVE('',#22421,#23181,#23183,.T.); +#23181 = VERTEX_POINT('',#23182); +#23182 = CARTESIAN_POINT('',(-0.16,-2.38,-3.)); +#23183 = LINE('',#23184,#23185); +#23184 = CARTESIAN_POINT('',(-0.16,-2.38,-3.)); +#23185 = VECTOR('',#23186,1.); +#23186 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#23187 = ORIENTED_EDGE('',*,*,#22420,.T.); +#23188 = ORIENTED_EDGE('',*,*,#23189,.T.); +#23189 = EDGE_CURVE('',#22413,#23190,#23192,.T.); +#23190 = VERTEX_POINT('',#23191); +#23191 = CARTESIAN_POINT('',(0.16,-2.38,-3.)); +#23192 = LINE('',#23193,#23194); +#23193 = CARTESIAN_POINT('',(5.333333333333E-02,-2.486666666667, + -3.106666666667)); +#23194 = VECTOR('',#23195,1.); +#23195 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#23196 = ORIENTED_EDGE('',*,*,#23197,.F.); +#23197 = EDGE_CURVE('',#23181,#23190,#23198,.T.); +#23198 = LINE('',#23199,#23200); +#23199 = CARTESIAN_POINT('',(-0.32,-2.38,-3.)); +#23200 = VECTOR('',#23201,1.); +#23201 = DIRECTION('',(1.,0.,0.)); +#23202 = PLANE('',#23203); +#23203 = AXIS2_PLACEMENT_3D('',#23204,#23205,#23206); +#23204 = CARTESIAN_POINT('',(-0.32,-2.3,-2.92)); +#23205 = DIRECTION('',(-1.735167508357E-18,-0.707106781187, + 0.707106781187)); +#23206 = DIRECTION('',(-1.,1.226948711654E-18,-1.226948711654E-18)); +#23207 = ADVANCED_FACE('',(#23208),#23226,.T.); +#23208 = FACE_BOUND('',#23209,.T.); +#23209 = EDGE_LOOP('',(#23210,#23218,#23219,#23220)); +#23210 = ORIENTED_EDGE('',*,*,#23211,.F.); +#23211 = EDGE_CURVE('',#22444,#23212,#23214,.T.); +#23212 = VERTEX_POINT('',#23213); +#23213 = CARTESIAN_POINT('',(-0.16,-2.7,-3.)); +#23214 = LINE('',#23215,#23216); +#23215 = CARTESIAN_POINT('',(-0.266666666667,-2.806666666667, + -2.893333333333)); +#23216 = VECTOR('',#23217,1.); +#23217 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#23218 = ORIENTED_EDGE('',*,*,#22451,.T.); +#23219 = ORIENTED_EDGE('',*,*,#23180,.T.); +#23220 = ORIENTED_EDGE('',*,*,#23221,.F.); +#23221 = EDGE_CURVE('',#23212,#23181,#23222,.T.); +#23222 = LINE('',#23223,#23224); +#23223 = CARTESIAN_POINT('',(-0.16,-2.86,-3.)); +#23224 = VECTOR('',#23225,1.); +#23225 = DIRECTION('',(0.,1.,0.)); +#23226 = PLANE('',#23227); +#23227 = AXIS2_PLACEMENT_3D('',#23228,#23229,#23230); +#23228 = CARTESIAN_POINT('',(-0.24,-2.86,-2.92)); +#23229 = DIRECTION('',(-0.707106781187,-1.735167508357E-18, + -0.707106781187)); +#23230 = DIRECTION('',(-1.226948711654E-18,1.,-1.226948711654E-18)); +#23231 = ADVANCED_FACE('',(#23232),#23250,.T.); +#23232 = FACE_BOUND('',#23233,.F.); +#23233 = EDGE_LOOP('',(#23234,#23235,#23236,#23244)); +#23234 = ORIENTED_EDGE('',*,*,#23211,.F.); +#23235 = ORIENTED_EDGE('',*,*,#22475,.T.); +#23236 = ORIENTED_EDGE('',*,*,#23237,.T.); +#23237 = EDGE_CURVE('',#22468,#23238,#23240,.T.); +#23238 = VERTEX_POINT('',#23239); +#23239 = CARTESIAN_POINT('',(0.16,-2.7,-3.)); +#23240 = LINE('',#23241,#23242); +#23241 = CARTESIAN_POINT('',(0.16,-2.7,-3.)); +#23242 = VECTOR('',#23243,1.); +#23243 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#23244 = ORIENTED_EDGE('',*,*,#23245,.F.); +#23245 = EDGE_CURVE('',#23212,#23238,#23246,.T.); +#23246 = LINE('',#23247,#23248); +#23247 = CARTESIAN_POINT('',(-0.32,-2.7,-3.)); +#23248 = VECTOR('',#23249,1.); +#23249 = DIRECTION('',(1.,0.,0.)); +#23250 = PLANE('',#23251); +#23251 = AXIS2_PLACEMENT_3D('',#23252,#23253,#23254); +#23252 = CARTESIAN_POINT('',(-0.32,-2.78,-2.92)); +#23253 = DIRECTION('',(1.735167508357E-18,-0.707106781187, + -0.707106781187)); +#23254 = DIRECTION('',(-1.,-1.226948711654E-18,-1.226948711654E-18)); +#23255 = ADVANCED_FACE('',(#23256),#23267,.F.); +#23256 = FACE_BOUND('',#23257,.F.); +#23257 = EDGE_LOOP('',(#23258,#23259,#23260,#23261)); +#23258 = ORIENTED_EDGE('',*,*,#23237,.F.); +#23259 = ORIENTED_EDGE('',*,*,#22492,.T.); +#23260 = ORIENTED_EDGE('',*,*,#23189,.T.); +#23261 = ORIENTED_EDGE('',*,*,#23262,.F.); +#23262 = EDGE_CURVE('',#23238,#23190,#23263,.T.); +#23263 = LINE('',#23264,#23265); +#23264 = CARTESIAN_POINT('',(0.16,-2.86,-3.)); +#23265 = VECTOR('',#23266,1.); +#23266 = DIRECTION('',(0.,1.,0.)); +#23267 = PLANE('',#23268); +#23268 = AXIS2_PLACEMENT_3D('',#23269,#23270,#23271); +#23269 = CARTESIAN_POINT('',(0.24,-2.86,-2.92)); +#23270 = DIRECTION('',(-0.707106781187,1.735167508357E-18,0.707106781187 + )); +#23271 = DIRECTION('',(1.226948711654E-18,1.,-1.226948711654E-18)); +#23272 = ADVANCED_FACE('',(#23273),#23298,.T.); +#23273 = FACE_BOUND('',#23274,.F.); +#23274 = EDGE_LOOP('',(#23275,#23283,#23284,#23292)); +#23275 = ORIENTED_EDGE('',*,*,#23276,.F.); +#23276 = EDGE_CURVE('',#22518,#23277,#23279,.T.); +#23277 = VERTEX_POINT('',#23278); +#23278 = CARTESIAN_POINT('',(-0.16,-4.92,8.54)); +#23279 = LINE('',#23280,#23281); +#23280 = CARTESIAN_POINT('',(-0.16,-4.92,8.54)); +#23281 = VECTOR('',#23282,1.); +#23282 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#23283 = ORIENTED_EDGE('',*,*,#22525,.T.); +#23284 = ORIENTED_EDGE('',*,*,#23285,.T.); +#23285 = EDGE_CURVE('',#22509,#23286,#23288,.T.); +#23286 = VERTEX_POINT('',#23287); +#23287 = CARTESIAN_POINT('',(0.16,-4.92,8.54)); +#23288 = LINE('',#23289,#23290); +#23289 = CARTESIAN_POINT('',(5.333333333333E-02,-5.026666666667, + 8.646666666667)); +#23290 = VECTOR('',#23291,1.); +#23291 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#23292 = ORIENTED_EDGE('',*,*,#23293,.F.); +#23293 = EDGE_CURVE('',#23277,#23286,#23294,.T.); +#23294 = LINE('',#23295,#23296); +#23295 = CARTESIAN_POINT('',(-0.32,-4.92,8.54)); +#23296 = VECTOR('',#23297,1.); +#23297 = DIRECTION('',(1.,0.,0.)); +#23298 = PLANE('',#23299); +#23299 = AXIS2_PLACEMENT_3D('',#23300,#23301,#23302); +#23300 = CARTESIAN_POINT('',(-0.32,-4.84,8.46)); +#23301 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#23302 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#23303 = ADVANCED_FACE('',(#23304),#23322,.F.); +#23304 = FACE_BOUND('',#23305,.F.); +#23305 = EDGE_LOOP('',(#23306,#23314,#23315,#23316)); +#23306 = ORIENTED_EDGE('',*,*,#23307,.F.); +#23307 = EDGE_CURVE('',#22540,#23308,#23310,.T.); +#23308 = VERTEX_POINT('',#23309); +#23309 = CARTESIAN_POINT('',(-0.16,-5.24,8.54)); +#23310 = LINE('',#23311,#23312); +#23311 = CARTESIAN_POINT('',(-0.266666666667,-5.346666666667, + 8.433333333333)); +#23312 = VECTOR('',#23313,1.); +#23313 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#23314 = ORIENTED_EDGE('',*,*,#22549,.T.); +#23315 = ORIENTED_EDGE('',*,*,#23276,.T.); +#23316 = ORIENTED_EDGE('',*,*,#23317,.F.); +#23317 = EDGE_CURVE('',#23308,#23277,#23318,.T.); +#23318 = LINE('',#23319,#23320); +#23319 = CARTESIAN_POINT('',(-0.16,-5.4,8.54)); +#23320 = VECTOR('',#23321,1.); +#23321 = DIRECTION('',(0.,1.,0.)); +#23322 = PLANE('',#23323); +#23323 = AXIS2_PLACEMENT_3D('',#23324,#23325,#23326); +#23324 = CARTESIAN_POINT('',(-0.24,-5.4,8.46)); +#23325 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#23326 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#23327 = ADVANCED_FACE('',(#23328),#23346,.F.); +#23328 = FACE_BOUND('',#23329,.T.); +#23329 = EDGE_LOOP('',(#23330,#23331,#23332,#23340)); +#23330 = ORIENTED_EDGE('',*,*,#23307,.F.); +#23331 = ORIENTED_EDGE('',*,*,#22573,.T.); +#23332 = ORIENTED_EDGE('',*,*,#23333,.T.); +#23333 = EDGE_CURVE('',#22564,#23334,#23336,.T.); +#23334 = VERTEX_POINT('',#23335); +#23335 = CARTESIAN_POINT('',(0.16,-5.24,8.54)); +#23336 = LINE('',#23337,#23338); +#23337 = CARTESIAN_POINT('',(0.16,-5.24,8.54)); +#23338 = VECTOR('',#23339,1.); +#23339 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#23340 = ORIENTED_EDGE('',*,*,#23341,.F.); +#23341 = EDGE_CURVE('',#23308,#23334,#23342,.T.); +#23342 = LINE('',#23343,#23344); +#23343 = CARTESIAN_POINT('',(-0.32,-5.24,8.54)); +#23344 = VECTOR('',#23345,1.); +#23345 = DIRECTION('',(1.,0.,0.)); +#23346 = PLANE('',#23347); +#23347 = AXIS2_PLACEMENT_3D('',#23348,#23349,#23350); +#23348 = CARTESIAN_POINT('',(-0.32,-5.32,8.46)); +#23349 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#23350 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#23351 = ADVANCED_FACE('',(#23352),#23363,.T.); +#23352 = FACE_BOUND('',#23353,.T.); +#23353 = EDGE_LOOP('',(#23354,#23355,#23356,#23357)); +#23354 = ORIENTED_EDGE('',*,*,#23333,.F.); +#23355 = ORIENTED_EDGE('',*,*,#22590,.T.); +#23356 = ORIENTED_EDGE('',*,*,#23285,.T.); +#23357 = ORIENTED_EDGE('',*,*,#23358,.F.); +#23358 = EDGE_CURVE('',#23334,#23286,#23359,.T.); +#23359 = LINE('',#23360,#23361); +#23360 = CARTESIAN_POINT('',(0.16,-5.4,8.54)); +#23361 = VECTOR('',#23362,1.); +#23362 = DIRECTION('',(0.,1.,0.)); +#23363 = PLANE('',#23364); +#23364 = AXIS2_PLACEMENT_3D('',#23365,#23366,#23367); +#23365 = CARTESIAN_POINT('',(0.24,-5.4,8.46)); +#23366 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#23367 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#23368 = ADVANCED_FACE('',(#23369),#23394,.T.); +#23369 = FACE_BOUND('',#23370,.T.); +#23370 = EDGE_LOOP('',(#23371,#23379,#23380,#23388)); +#23371 = ORIENTED_EDGE('',*,*,#23372,.F.); +#23372 = EDGE_CURVE('',#22605,#23373,#23375,.T.); +#23373 = VERTEX_POINT('',#23374); +#23374 = CARTESIAN_POINT('',(0.16,-7.78,8.54)); +#23375 = LINE('',#23376,#23377); +#23376 = CARTESIAN_POINT('',(0.16,-7.78,8.54)); +#23377 = VECTOR('',#23378,1.); +#23378 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#23379 = ORIENTED_EDGE('',*,*,#22621,.T.); +#23380 = ORIENTED_EDGE('',*,*,#23381,.T.); +#23381 = EDGE_CURVE('',#22614,#23382,#23384,.T.); +#23382 = VERTEX_POINT('',#23383); +#23383 = CARTESIAN_POINT('',(0.16,-7.46,8.54)); +#23384 = LINE('',#23385,#23386); +#23385 = CARTESIAN_POINT('',(5.333333333333E-02,-7.566666666667, + 8.646666666667)); +#23386 = VECTOR('',#23387,1.); +#23387 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#23388 = ORIENTED_EDGE('',*,*,#23389,.F.); +#23389 = EDGE_CURVE('',#23373,#23382,#23390,.T.); +#23390 = LINE('',#23391,#23392); +#23391 = CARTESIAN_POINT('',(0.16,-7.94,8.54)); +#23392 = VECTOR('',#23393,1.); +#23393 = DIRECTION('',(0.,1.,0.)); +#23394 = PLANE('',#23395); +#23395 = AXIS2_PLACEMENT_3D('',#23396,#23397,#23398); +#23396 = CARTESIAN_POINT('',(0.24,-7.94,8.46)); +#23397 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#23398 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#23399 = ADVANCED_FACE('',(#23400),#23418,.T.); +#23400 = FACE_BOUND('',#23401,.F.); +#23401 = EDGE_LOOP('',(#23402,#23410,#23411,#23412)); +#23402 = ORIENTED_EDGE('',*,*,#23403,.F.); +#23403 = EDGE_CURVE('',#22638,#23404,#23406,.T.); +#23404 = VERTEX_POINT('',#23405); +#23405 = CARTESIAN_POINT('',(-0.16,-7.46,8.54)); +#23406 = LINE('',#23407,#23408); +#23407 = CARTESIAN_POINT('',(-0.16,-7.46,8.54)); +#23408 = VECTOR('',#23409,1.); +#23409 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#23410 = ORIENTED_EDGE('',*,*,#22645,.T.); +#23411 = ORIENTED_EDGE('',*,*,#23381,.T.); +#23412 = ORIENTED_EDGE('',*,*,#23413,.F.); +#23413 = EDGE_CURVE('',#23404,#23382,#23414,.T.); +#23414 = LINE('',#23415,#23416); +#23415 = CARTESIAN_POINT('',(-0.32,-7.46,8.54)); +#23416 = VECTOR('',#23417,1.); +#23417 = DIRECTION('',(1.,0.,0.)); +#23418 = PLANE('',#23419); +#23419 = AXIS2_PLACEMENT_3D('',#23420,#23421,#23422); +#23420 = CARTESIAN_POINT('',(-0.32,-7.38,8.46)); +#23421 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#23422 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#23423 = ADVANCED_FACE('',(#23424),#23442,.F.); +#23424 = FACE_BOUND('',#23425,.F.); +#23425 = EDGE_LOOP('',(#23426,#23434,#23435,#23436)); +#23426 = ORIENTED_EDGE('',*,*,#23427,.F.); +#23427 = EDGE_CURVE('',#22660,#23428,#23430,.T.); +#23428 = VERTEX_POINT('',#23429); +#23429 = CARTESIAN_POINT('',(-0.16,-7.78,8.54)); +#23430 = LINE('',#23431,#23432); +#23431 = CARTESIAN_POINT('',(-0.266666666667,-7.886666666667, + 8.433333333333)); +#23432 = VECTOR('',#23433,1.); +#23433 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#23434 = ORIENTED_EDGE('',*,*,#22669,.T.); +#23435 = ORIENTED_EDGE('',*,*,#23403,.T.); +#23436 = ORIENTED_EDGE('',*,*,#23437,.F.); +#23437 = EDGE_CURVE('',#23428,#23404,#23438,.T.); +#23438 = LINE('',#23439,#23440); +#23439 = CARTESIAN_POINT('',(-0.16,-7.94,8.54)); +#23440 = VECTOR('',#23441,1.); +#23441 = DIRECTION('',(0.,1.,0.)); +#23442 = PLANE('',#23443); +#23443 = AXIS2_PLACEMENT_3D('',#23444,#23445,#23446); +#23444 = CARTESIAN_POINT('',(-0.24,-7.94,8.46)); +#23445 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#23446 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#23447 = ADVANCED_FACE('',(#23448),#23459,.F.); +#23448 = FACE_BOUND('',#23449,.T.); +#23449 = EDGE_LOOP('',(#23450,#23451,#23452,#23453)); +#23450 = ORIENTED_EDGE('',*,*,#23427,.F.); +#23451 = ORIENTED_EDGE('',*,*,#22686,.T.); +#23452 = ORIENTED_EDGE('',*,*,#23372,.T.); +#23453 = ORIENTED_EDGE('',*,*,#23454,.F.); +#23454 = EDGE_CURVE('',#23428,#23373,#23455,.T.); +#23455 = LINE('',#23456,#23457); +#23456 = CARTESIAN_POINT('',(-0.32,-7.78,8.54)); +#23457 = VECTOR('',#23458,1.); +#23458 = DIRECTION('',(1.,0.,0.)); +#23459 = PLANE('',#23460); +#23460 = AXIS2_PLACEMENT_3D('',#23461,#23462,#23463); +#23461 = CARTESIAN_POINT('',(-0.32,-7.86,8.46)); +#23462 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#23463 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#23464 = ADVANCED_FACE('',(#23465),#23490,.T.); +#23465 = FACE_BOUND('',#23466,.T.); +#23466 = EDGE_LOOP('',(#23467,#23475,#23476,#23484)); +#23467 = ORIENTED_EDGE('',*,*,#23468,.F.); +#23468 = EDGE_CURVE('',#22701,#23469,#23471,.T.); +#23469 = VERTEX_POINT('',#23470); +#23470 = CARTESIAN_POINT('',(0.16,-0.16,8.54)); +#23471 = LINE('',#23472,#23473); +#23472 = CARTESIAN_POINT('',(0.16,-0.16,8.54)); +#23473 = VECTOR('',#23474,1.); +#23474 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#23475 = ORIENTED_EDGE('',*,*,#22717,.T.); +#23476 = ORIENTED_EDGE('',*,*,#23477,.T.); +#23477 = EDGE_CURVE('',#22710,#23478,#23480,.T.); +#23478 = VERTEX_POINT('',#23479); +#23479 = CARTESIAN_POINT('',(0.16,0.16,8.54)); +#23480 = LINE('',#23481,#23482); +#23481 = CARTESIAN_POINT('',(5.333333333333E-02,5.333333333333E-02, + 8.646666666667)); +#23482 = VECTOR('',#23483,1.); +#23483 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#23484 = ORIENTED_EDGE('',*,*,#23485,.F.); +#23485 = EDGE_CURVE('',#23469,#23478,#23486,.T.); +#23486 = LINE('',#23487,#23488); +#23487 = CARTESIAN_POINT('',(0.16,-0.32,8.54)); +#23488 = VECTOR('',#23489,1.); +#23489 = DIRECTION('',(0.,1.,0.)); +#23490 = PLANE('',#23491); +#23491 = AXIS2_PLACEMENT_3D('',#23492,#23493,#23494); +#23492 = CARTESIAN_POINT('',(0.24,-0.32,8.46)); +#23493 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#23494 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#23495 = ADVANCED_FACE('',(#23496),#23514,.T.); +#23496 = FACE_BOUND('',#23497,.F.); +#23497 = EDGE_LOOP('',(#23498,#23506,#23507,#23508)); +#23498 = ORIENTED_EDGE('',*,*,#23499,.F.); +#23499 = EDGE_CURVE('',#22734,#23500,#23502,.T.); +#23500 = VERTEX_POINT('',#23501); +#23501 = CARTESIAN_POINT('',(-0.16,0.16,8.54)); +#23502 = LINE('',#23503,#23504); +#23503 = CARTESIAN_POINT('',(-0.16,0.16,8.54)); +#23504 = VECTOR('',#23505,1.); +#23505 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#23506 = ORIENTED_EDGE('',*,*,#22741,.T.); +#23507 = ORIENTED_EDGE('',*,*,#23477,.T.); +#23508 = ORIENTED_EDGE('',*,*,#23509,.F.); +#23509 = EDGE_CURVE('',#23500,#23478,#23510,.T.); +#23510 = LINE('',#23511,#23512); +#23511 = CARTESIAN_POINT('',(-0.32,0.16,8.54)); +#23512 = VECTOR('',#23513,1.); +#23513 = DIRECTION('',(1.,0.,0.)); +#23514 = PLANE('',#23515); +#23515 = AXIS2_PLACEMENT_3D('',#23516,#23517,#23518); +#23516 = CARTESIAN_POINT('',(-0.32,0.24,8.46)); +#23517 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#23518 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#23519 = ADVANCED_FACE('',(#23520),#23538,.F.); +#23520 = FACE_BOUND('',#23521,.F.); +#23521 = EDGE_LOOP('',(#23522,#23530,#23531,#23532)); +#23522 = ORIENTED_EDGE('',*,*,#23523,.F.); +#23523 = EDGE_CURVE('',#22756,#23524,#23526,.T.); +#23524 = VERTEX_POINT('',#23525); +#23525 = CARTESIAN_POINT('',(-0.16,-0.16,8.54)); +#23526 = LINE('',#23527,#23528); +#23527 = CARTESIAN_POINT('',(-0.266666666667,-0.266666666667, + 8.433333333333)); +#23528 = VECTOR('',#23529,1.); +#23529 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#23530 = ORIENTED_EDGE('',*,*,#22765,.T.); +#23531 = ORIENTED_EDGE('',*,*,#23499,.T.); +#23532 = ORIENTED_EDGE('',*,*,#23533,.F.); +#23533 = EDGE_CURVE('',#23524,#23500,#23534,.T.); +#23534 = LINE('',#23535,#23536); +#23535 = CARTESIAN_POINT('',(-0.16,-0.32,8.54)); +#23536 = VECTOR('',#23537,1.); +#23537 = DIRECTION('',(0.,1.,0.)); +#23538 = PLANE('',#23539); +#23539 = AXIS2_PLACEMENT_3D('',#23540,#23541,#23542); +#23540 = CARTESIAN_POINT('',(-0.24,-0.32,8.46)); +#23541 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#23542 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#23543 = ADVANCED_FACE('',(#23544),#23555,.F.); +#23544 = FACE_BOUND('',#23545,.T.); +#23545 = EDGE_LOOP('',(#23546,#23547,#23548,#23549)); +#23546 = ORIENTED_EDGE('',*,*,#23523,.F.); +#23547 = ORIENTED_EDGE('',*,*,#22782,.T.); +#23548 = ORIENTED_EDGE('',*,*,#23468,.T.); +#23549 = ORIENTED_EDGE('',*,*,#23550,.F.); +#23550 = EDGE_CURVE('',#23524,#23469,#23551,.T.); +#23551 = LINE('',#23552,#23553); +#23552 = CARTESIAN_POINT('',(-0.32,-0.16,8.54)); +#23553 = VECTOR('',#23554,1.); +#23554 = DIRECTION('',(1.,0.,0.)); +#23555 = PLANE('',#23556); +#23556 = AXIS2_PLACEMENT_3D('',#23557,#23558,#23559); +#23557 = CARTESIAN_POINT('',(-0.32,-0.24,8.46)); +#23558 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#23559 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#23560 = ADVANCED_FACE('',(#23561),#23586,.T.); +#23561 = FACE_BOUND('',#23562,.F.); +#23562 = EDGE_LOOP('',(#23563,#23571,#23572,#23580)); +#23563 = ORIENTED_EDGE('',*,*,#23564,.F.); +#23564 = EDGE_CURVE('',#22806,#23565,#23567,.T.); +#23565 = VERTEX_POINT('',#23566); +#23566 = CARTESIAN_POINT('',(-0.16,-2.38,8.54)); +#23567 = LINE('',#23568,#23569); +#23568 = CARTESIAN_POINT('',(-0.16,-2.38,8.54)); +#23569 = VECTOR('',#23570,1.); +#23570 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#23571 = ORIENTED_EDGE('',*,*,#22813,.T.); +#23572 = ORIENTED_EDGE('',*,*,#23573,.T.); +#23573 = EDGE_CURVE('',#22797,#23574,#23576,.T.); +#23574 = VERTEX_POINT('',#23575); +#23575 = CARTESIAN_POINT('',(0.16,-2.38,8.54)); +#23576 = LINE('',#23577,#23578); +#23577 = CARTESIAN_POINT('',(5.333333333333E-02,-2.486666666667, + 8.646666666667)); +#23578 = VECTOR('',#23579,1.); +#23579 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#23580 = ORIENTED_EDGE('',*,*,#23581,.F.); +#23581 = EDGE_CURVE('',#23565,#23574,#23582,.T.); +#23582 = LINE('',#23583,#23584); +#23583 = CARTESIAN_POINT('',(-0.32,-2.38,8.54)); +#23584 = VECTOR('',#23585,1.); +#23585 = DIRECTION('',(1.,0.,0.)); +#23586 = PLANE('',#23587); +#23587 = AXIS2_PLACEMENT_3D('',#23588,#23589,#23590); +#23588 = CARTESIAN_POINT('',(-0.32,-2.3,8.46)); +#23589 = DIRECTION('',(1.735167508357E-18,0.707106781187,0.707106781187) + ); +#23590 = DIRECTION('',(-1.,1.226948711654E-18,1.226948711654E-18)); +#23591 = ADVANCED_FACE('',(#23592),#23610,.F.); +#23592 = FACE_BOUND('',#23593,.F.); +#23593 = EDGE_LOOP('',(#23594,#23602,#23603,#23604)); +#23594 = ORIENTED_EDGE('',*,*,#23595,.F.); +#23595 = EDGE_CURVE('',#22828,#23596,#23598,.T.); +#23596 = VERTEX_POINT('',#23597); +#23597 = CARTESIAN_POINT('',(-0.16,-2.7,8.54)); +#23598 = LINE('',#23599,#23600); +#23599 = CARTESIAN_POINT('',(-0.266666666667,-2.806666666667, + 8.433333333333)); +#23600 = VECTOR('',#23601,1.); +#23601 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#23602 = ORIENTED_EDGE('',*,*,#22837,.T.); +#23603 = ORIENTED_EDGE('',*,*,#23564,.T.); +#23604 = ORIENTED_EDGE('',*,*,#23605,.F.); +#23605 = EDGE_CURVE('',#23596,#23565,#23606,.T.); +#23606 = LINE('',#23607,#23608); +#23607 = CARTESIAN_POINT('',(-0.16,-2.86,8.54)); +#23608 = VECTOR('',#23609,1.); +#23609 = DIRECTION('',(0.,1.,0.)); +#23610 = PLANE('',#23611); +#23611 = AXIS2_PLACEMENT_3D('',#23612,#23613,#23614); +#23612 = CARTESIAN_POINT('',(-0.24,-2.86,8.46)); +#23613 = DIRECTION('',(0.707106781187,1.735167508357E-18,-0.707106781187 + )); +#23614 = DIRECTION('',(-1.226948711654E-18,1.,1.226948711654E-18)); +#23615 = ADVANCED_FACE('',(#23616),#23634,.F.); +#23616 = FACE_BOUND('',#23617,.T.); +#23617 = EDGE_LOOP('',(#23618,#23619,#23620,#23628)); +#23618 = ORIENTED_EDGE('',*,*,#23595,.F.); +#23619 = ORIENTED_EDGE('',*,*,#22861,.T.); +#23620 = ORIENTED_EDGE('',*,*,#23621,.T.); +#23621 = EDGE_CURVE('',#22852,#23622,#23624,.T.); +#23622 = VERTEX_POINT('',#23623); +#23623 = CARTESIAN_POINT('',(0.16,-2.7,8.54)); +#23624 = LINE('',#23625,#23626); +#23625 = CARTESIAN_POINT('',(0.16,-2.7,8.54)); +#23626 = VECTOR('',#23627,1.); +#23627 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); +#23628 = ORIENTED_EDGE('',*,*,#23629,.F.); +#23629 = EDGE_CURVE('',#23596,#23622,#23630,.T.); +#23630 = LINE('',#23631,#23632); +#23631 = CARTESIAN_POINT('',(-0.32,-2.7,8.54)); +#23632 = VECTOR('',#23633,1.); +#23633 = DIRECTION('',(1.,0.,0.)); +#23634 = PLANE('',#23635); +#23635 = AXIS2_PLACEMENT_3D('',#23636,#23637,#23638); +#23636 = CARTESIAN_POINT('',(-0.32,-2.78,8.46)); +#23637 = DIRECTION('',(-1.735167508357E-18,0.707106781187, + -0.707106781187)); +#23638 = DIRECTION('',(-1.,-1.226948711654E-18,1.226948711654E-18)); +#23639 = ADVANCED_FACE('',(#23640),#23651,.T.); +#23640 = FACE_BOUND('',#23641,.T.); +#23641 = EDGE_LOOP('',(#23642,#23643,#23644,#23645)); +#23642 = ORIENTED_EDGE('',*,*,#23621,.F.); +#23643 = ORIENTED_EDGE('',*,*,#22878,.T.); +#23644 = ORIENTED_EDGE('',*,*,#23573,.T.); +#23645 = ORIENTED_EDGE('',*,*,#23646,.F.); +#23646 = EDGE_CURVE('',#23622,#23574,#23647,.T.); +#23647 = LINE('',#23648,#23649); +#23648 = CARTESIAN_POINT('',(0.16,-2.86,8.54)); +#23649 = VECTOR('',#23650,1.); +#23650 = DIRECTION('',(0.,1.,0.)); +#23651 = PLANE('',#23652); +#23652 = AXIS2_PLACEMENT_3D('',#23653,#23654,#23655); +#23653 = CARTESIAN_POINT('',(0.24,-2.86,8.46)); +#23654 = DIRECTION('',(0.707106781187,-1.735167508357E-18,0.707106781187 + )); +#23655 = DIRECTION('',(1.226948711654E-18,1.,1.226948711654E-18)); +#23656 = ADVANCED_FACE('',(#23657),#23663,.F.); +#23657 = FACE_BOUND('',#23658,.F.); +#23658 = EDGE_LOOP('',(#23659,#23660,#23661,#23662)); +#23659 = ORIENTED_EDGE('',*,*,#22974,.T.); +#23660 = ORIENTED_EDGE('',*,*,#22909,.F.); +#23661 = ORIENTED_EDGE('',*,*,#22933,.F.); +#23662 = ORIENTED_EDGE('',*,*,#22957,.T.); +#23663 = PLANE('',#23664); +#23664 = AXIS2_PLACEMENT_3D('',#23665,#23666,#23667); +#23665 = CARTESIAN_POINT('',(-0.32,-5.4,-3.)); +#23666 = DIRECTION('',(0.,0.,1.)); +#23667 = DIRECTION('',(1.,0.,-0.)); +#23668 = ADVANCED_FACE('',(#23669),#23675,.F.); +#23669 = FACE_BOUND('',#23670,.F.); +#23670 = EDGE_LOOP('',(#23671,#23672,#23673,#23674)); +#23671 = ORIENTED_EDGE('',*,*,#23005,.T.); +#23672 = ORIENTED_EDGE('',*,*,#23029,.F.); +#23673 = ORIENTED_EDGE('',*,*,#23053,.F.); +#23674 = ORIENTED_EDGE('',*,*,#23070,.T.); +#23675 = PLANE('',#23676); +#23676 = AXIS2_PLACEMENT_3D('',#23677,#23678,#23679); +#23677 = CARTESIAN_POINT('',(-0.32,-7.94,-3.)); +#23678 = DIRECTION('',(0.,0.,1.)); +#23679 = DIRECTION('',(1.,0.,-0.)); +#23680 = ADVANCED_FACE('',(#23681),#23687,.F.); +#23681 = FACE_BOUND('',#23682,.F.); +#23682 = EDGE_LOOP('',(#23683,#23684,#23685,#23686)); +#23683 = ORIENTED_EDGE('',*,*,#23101,.T.); +#23684 = ORIENTED_EDGE('',*,*,#23125,.F.); +#23685 = ORIENTED_EDGE('',*,*,#23149,.F.); +#23686 = ORIENTED_EDGE('',*,*,#23166,.T.); +#23687 = PLANE('',#23688); +#23688 = AXIS2_PLACEMENT_3D('',#23689,#23690,#23691); +#23689 = CARTESIAN_POINT('',(-0.32,-0.32,-3.)); +#23690 = DIRECTION('',(0.,0.,1.)); +#23691 = DIRECTION('',(1.,0.,-0.)); +#23692 = ADVANCED_FACE('',(#23693),#23699,.F.); +#23693 = FACE_BOUND('',#23694,.F.); +#23694 = EDGE_LOOP('',(#23695,#23696,#23697,#23698)); +#23695 = ORIENTED_EDGE('',*,*,#23262,.T.); +#23696 = ORIENTED_EDGE('',*,*,#23197,.F.); +#23697 = ORIENTED_EDGE('',*,*,#23221,.F.); +#23698 = ORIENTED_EDGE('',*,*,#23245,.T.); +#23699 = PLANE('',#23700); +#23700 = AXIS2_PLACEMENT_3D('',#23701,#23702,#23703); +#23701 = CARTESIAN_POINT('',(-0.32,-2.86,-3.)); +#23702 = DIRECTION('',(0.,0.,1.)); +#23703 = DIRECTION('',(1.,0.,-0.)); +#23704 = ADVANCED_FACE('',(#23705),#23711,.T.); +#23705 = FACE_BOUND('',#23706,.T.); +#23706 = EDGE_LOOP('',(#23707,#23708,#23709,#23710)); +#23707 = ORIENTED_EDGE('',*,*,#23358,.T.); +#23708 = ORIENTED_EDGE('',*,*,#23293,.F.); +#23709 = ORIENTED_EDGE('',*,*,#23317,.F.); +#23710 = ORIENTED_EDGE('',*,*,#23341,.T.); +#23711 = PLANE('',#23712); +#23712 = AXIS2_PLACEMENT_3D('',#23713,#23714,#23715); +#23713 = CARTESIAN_POINT('',(-0.32,-5.4,8.54)); +#23714 = DIRECTION('',(0.,0.,1.)); +#23715 = DIRECTION('',(1.,0.,-0.)); +#23716 = ADVANCED_FACE('',(#23717),#23723,.T.); +#23717 = FACE_BOUND('',#23718,.T.); +#23718 = EDGE_LOOP('',(#23719,#23720,#23721,#23722)); +#23719 = ORIENTED_EDGE('',*,*,#23389,.T.); +#23720 = ORIENTED_EDGE('',*,*,#23413,.F.); +#23721 = ORIENTED_EDGE('',*,*,#23437,.F.); +#23722 = ORIENTED_EDGE('',*,*,#23454,.T.); +#23723 = PLANE('',#23724); +#23724 = AXIS2_PLACEMENT_3D('',#23725,#23726,#23727); +#23725 = CARTESIAN_POINT('',(-0.32,-7.94,8.54)); +#23726 = DIRECTION('',(0.,0.,1.)); +#23727 = DIRECTION('',(1.,0.,-0.)); +#23728 = ADVANCED_FACE('',(#23729),#23735,.T.); +#23729 = FACE_BOUND('',#23730,.T.); +#23730 = EDGE_LOOP('',(#23731,#23732,#23733,#23734)); +#23731 = ORIENTED_EDGE('',*,*,#23485,.T.); +#23732 = ORIENTED_EDGE('',*,*,#23509,.F.); +#23733 = ORIENTED_EDGE('',*,*,#23533,.F.); +#23734 = ORIENTED_EDGE('',*,*,#23550,.T.); +#23735 = PLANE('',#23736); +#23736 = AXIS2_PLACEMENT_3D('',#23737,#23738,#23739); +#23737 = CARTESIAN_POINT('',(-0.32,-0.32,8.54)); +#23738 = DIRECTION('',(0.,0.,1.)); +#23739 = DIRECTION('',(1.,0.,-0.)); +#23740 = ADVANCED_FACE('',(#23741),#23747,.T.); +#23741 = FACE_BOUND('',#23742,.T.); +#23742 = EDGE_LOOP('',(#23743,#23744,#23745,#23746)); +#23743 = ORIENTED_EDGE('',*,*,#23646,.T.); +#23744 = ORIENTED_EDGE('',*,*,#23581,.F.); +#23745 = ORIENTED_EDGE('',*,*,#23605,.F.); +#23746 = ORIENTED_EDGE('',*,*,#23629,.T.); +#23747 = PLANE('',#23748); +#23748 = AXIS2_PLACEMENT_3D('',#23749,#23750,#23751); +#23749 = CARTESIAN_POINT('',(-0.32,-2.86,8.54)); +#23750 = DIRECTION('',(0.,0.,1.)); +#23751 = DIRECTION('',(1.,0.,-0.)); +#23752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#23756)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#23753,#23754,#23755)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#23753 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#23754 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#23755 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#23756 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#23753, + 'distance_accuracy_value','confusion accuracy'); +#23757 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#23758,#23760); +#23758 = ( REPRESENTATION_RELATIONSHIP('','',#20971,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#23759) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#23759 = ITEM_DEFINED_TRANSFORMATION('','',#11,#127); +#23760 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #23761); +#23761 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('29','J8','',#5,#20966,$); +#23762 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#20968)); +#23763 = SHAPE_DEFINITION_REPRESENTATION(#23764,#23770); +#23764 = PRODUCT_DEFINITION_SHAPE('','',#23765); +#23765 = PRODUCT_DEFINITION('design','',#23766,#23769); +#23766 = PRODUCT_DEFINITION_FORMATION('','',#23767); +#23767 = PRODUCT('Converter_DCDC_RECOM_R-78E-0.5_THT', + 'Converter_DCDC_RECOM_R-78E-0.5_THT','',(#23768)); +#23768 = PRODUCT_CONTEXT('',#2,'mechanical'); +#23769 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#23770 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#23771),#24478); +#23771 = MANIFOLD_SOLID_BREP('',#23772); +#23772 = CLOSED_SHELL('',(#23773,#23807,#23832,#23841,#23942,#23973, + #23998,#24023,#24047,#24071,#24096,#24121,#24138,#24163,#24188, + #24221,#24247,#24273,#24298,#24323,#24349,#24375,#24392,#24418, + #24444,#24460,#24469)); +#23773 = ADVANCED_FACE('',(#23774),#23802,.T.); +#23774 = FACE_BOUND('',#23775,.T.); +#23775 = EDGE_LOOP('',(#23776,#23785,#23794,#23801)); +#23776 = ORIENTED_EDGE('',*,*,#23777,.T.); +#23777 = EDGE_CURVE('',#23778,#23778,#23780,.T.); +#23778 = VERTEX_POINT('',#23779); +#23779 = CARTESIAN_POINT('',(5.23,6.162975822039E-33,-4.)); +#23780 = CIRCLE('',#23781,0.15); +#23781 = AXIS2_PLACEMENT_3D('',#23782,#23783,#23784); +#23782 = CARTESIAN_POINT('',(5.08,1.54074395551E-32,-4.)); +#23783 = DIRECTION('',(-7.92969555769E-31,-4.08046586736E-33,1.)); +#23784 = DIRECTION('',(1.,-6.162975822039E-32,7.92969555769E-31)); +#23785 = ORIENTED_EDGE('',*,*,#23786,.F.); +#23786 = EDGE_CURVE('',#23787,#23778,#23789,.T.); +#23787 = VERTEX_POINT('',#23788); +#23788 = CARTESIAN_POINT('',(5.33,-4.08046586736E-34,-3.9)); +#23789 = CIRCLE('',#23790,0.1); +#23790 = AXIS2_PLACEMENT_3D('',#23791,#23792,#23793); +#23791 = CARTESIAN_POINT('',(5.23,5.754929235303E-33,-3.9)); +#23792 = DIRECTION('',(6.162975822039E-32,1.,4.08046586736E-33)); +#23793 = DIRECTION('',(1.,-6.162975822039E-32,7.92969555769E-31)); +#23794 = ORIENTED_EDGE('',*,*,#23795,.F.); +#23795 = EDGE_CURVE('',#23787,#23787,#23796,.T.); +#23796 = CIRCLE('',#23797,0.25); +#23797 = AXIS2_PLACEMENT_3D('',#23798,#23799,#23800); +#23798 = CARTESIAN_POINT('',(5.08,1.499939296836E-32,-3.9)); +#23799 = DIRECTION('',(-7.92969555769E-31,-4.08046586736E-33,1.)); +#23800 = DIRECTION('',(1.,-6.162975822039E-32,7.92969555769E-31)); +#23801 = ORIENTED_EDGE('',*,*,#23786,.T.); +#23802 = TOROIDAL_SURFACE('',#23803,0.15,0.1); +#23803 = AXIS2_PLACEMENT_3D('',#23804,#23805,#23806); +#23804 = CARTESIAN_POINT('',(5.08,1.499939296836E-32,-3.9)); +#23805 = DIRECTION('',(7.92969555769E-31,4.08046586736E-33,-1.)); +#23806 = DIRECTION('',(1.,-6.162975822039E-32,7.92969555769E-31)); +#23807 = ADVANCED_FACE('',(#23808),#23827,.T.); +#23808 = FACE_BOUND('',#23809,.T.); +#23809 = EDGE_LOOP('',(#23810,#23819,#23825,#23826)); +#23810 = ORIENTED_EDGE('',*,*,#23811,.F.); +#23811 = EDGE_CURVE('',#23812,#23812,#23814,.T.); +#23812 = VERTEX_POINT('',#23813); +#23813 = CARTESIAN_POINT('',(5.33,0.,0.1)); +#23814 = CIRCLE('',#23815,0.25); +#23815 = AXIS2_PLACEMENT_3D('',#23816,#23817,#23818); +#23816 = CARTESIAN_POINT('',(5.08,0.,0.1)); +#23817 = DIRECTION('',(0.,0.,1.)); +#23818 = DIRECTION('',(1.,0.,-0.)); +#23819 = ORIENTED_EDGE('',*,*,#23820,.T.); +#23820 = EDGE_CURVE('',#23812,#23787,#23821,.T.); +#23821 = LINE('',#23822,#23823); +#23822 = CARTESIAN_POINT('',(5.33,0.,0.2)); +#23823 = VECTOR('',#23824,1.); +#23824 = DIRECTION('',(-0.,-0.,-1.)); +#23825 = ORIENTED_EDGE('',*,*,#23795,.T.); +#23826 = ORIENTED_EDGE('',*,*,#23820,.F.); +#23827 = CYLINDRICAL_SURFACE('',#23828,0.25); +#23828 = AXIS2_PLACEMENT_3D('',#23829,#23830,#23831); +#23829 = CARTESIAN_POINT('',(5.08,0.,0.2)); +#23830 = DIRECTION('',(0.,0.,1.)); +#23831 = DIRECTION('',(1.,0.,-0.)); +#23832 = ADVANCED_FACE('',(#23833),#23836,.F.); +#23833 = FACE_BOUND('',#23834,.F.); +#23834 = EDGE_LOOP('',(#23835)); +#23835 = ORIENTED_EDGE('',*,*,#23777,.T.); +#23836 = PLANE('',#23837); +#23837 = AXIS2_PLACEMENT_3D('',#23838,#23839,#23840); +#23838 = CARTESIAN_POINT('',(5.08,2.18439881135E-17,-4.)); +#23839 = DIRECTION('',(-7.92969555769E-31,-4.08046586736E-33,1.)); +#23840 = DIRECTION('',(1.,0.,7.92969555769E-31)); +#23841 = ADVANCED_FACE('',(#23842,#23912,#23923,#23926),#23937,.T.); +#23842 = FACE_BOUND('',#23843,.T.); +#23843 = EDGE_LOOP('',(#23844,#23854,#23863,#23871,#23880,#23888,#23897, + #23905)); +#23844 = ORIENTED_EDGE('',*,*,#23845,.T.); +#23845 = EDGE_CURVE('',#23846,#23848,#23850,.T.); +#23846 = VERTEX_POINT('',#23847); +#23847 = CARTESIAN_POINT('',(8.29,6.075,0.1)); +#23848 = VERTEX_POINT('',#23849); +#23849 = CARTESIAN_POINT('',(8.29,-1.575,0.1)); +#23850 = LINE('',#23851,#23852); +#23851 = CARTESIAN_POINT('',(8.29,6.5,0.1)); +#23852 = VECTOR('',#23853,1.); +#23853 = DIRECTION('',(0.,-1.,0.)); +#23854 = ORIENTED_EDGE('',*,*,#23855,.F.); +#23855 = EDGE_CURVE('',#23856,#23848,#23858,.T.); +#23856 = VERTEX_POINT('',#23857); +#23857 = CARTESIAN_POINT('',(7.865,-2.,0.1)); +#23858 = CIRCLE('',#23859,0.425); +#23859 = AXIS2_PLACEMENT_3D('',#23860,#23861,#23862); +#23860 = CARTESIAN_POINT('',(7.865,-1.575,0.1)); +#23861 = DIRECTION('',(-0.,0.,1.)); +#23862 = DIRECTION('',(0.,-1.,0.)); +#23863 = ORIENTED_EDGE('',*,*,#23864,.T.); +#23864 = EDGE_CURVE('',#23856,#23865,#23867,.T.); +#23865 = VERTEX_POINT('',#23866); +#23866 = CARTESIAN_POINT('',(-2.885,-2.,0.1)); +#23867 = LINE('',#23868,#23869); +#23868 = CARTESIAN_POINT('',(8.29,-2.,0.1)); +#23869 = VECTOR('',#23870,1.); +#23870 = DIRECTION('',(-1.,0.,0.)); +#23871 = ORIENTED_EDGE('',*,*,#23872,.T.); +#23872 = EDGE_CURVE('',#23865,#23873,#23875,.T.); +#23873 = VERTEX_POINT('',#23874); +#23874 = CARTESIAN_POINT('',(-3.31,-1.575,0.1)); +#23875 = CIRCLE('',#23876,0.425); +#23876 = AXIS2_PLACEMENT_3D('',#23877,#23878,#23879); +#23877 = CARTESIAN_POINT('',(-2.885,-1.575,0.1)); +#23878 = DIRECTION('',(-0.,-0.,-1.)); +#23879 = DIRECTION('',(0.,-1.,0.)); +#23880 = ORIENTED_EDGE('',*,*,#23881,.T.); +#23881 = EDGE_CURVE('',#23873,#23882,#23884,.T.); +#23882 = VERTEX_POINT('',#23883); +#23883 = CARTESIAN_POINT('',(-3.31,6.075,0.1)); +#23884 = LINE('',#23885,#23886); +#23885 = CARTESIAN_POINT('',(-3.31,-2.,0.1)); +#23886 = VECTOR('',#23887,1.); +#23887 = DIRECTION('',(0.,1.,0.)); +#23888 = ORIENTED_EDGE('',*,*,#23889,.T.); +#23889 = EDGE_CURVE('',#23882,#23890,#23892,.T.); +#23890 = VERTEX_POINT('',#23891); +#23891 = CARTESIAN_POINT('',(-2.885,6.5,0.1)); +#23892 = CIRCLE('',#23893,0.425); +#23893 = AXIS2_PLACEMENT_3D('',#23894,#23895,#23896); +#23894 = CARTESIAN_POINT('',(-2.885,6.075,0.1)); +#23895 = DIRECTION('',(-0.,-0.,-1.)); +#23896 = DIRECTION('',(0.,-1.,0.)); +#23897 = ORIENTED_EDGE('',*,*,#23898,.T.); +#23898 = EDGE_CURVE('',#23890,#23899,#23901,.T.); +#23899 = VERTEX_POINT('',#23900); +#23900 = CARTESIAN_POINT('',(7.865,6.5,0.1)); +#23901 = LINE('',#23902,#23903); +#23902 = CARTESIAN_POINT('',(-3.31,6.5,0.1)); +#23903 = VECTOR('',#23904,1.); +#23904 = DIRECTION('',(1.,0.,0.)); +#23905 = ORIENTED_EDGE('',*,*,#23906,.F.); +#23906 = EDGE_CURVE('',#23846,#23899,#23907,.T.); +#23907 = CIRCLE('',#23908,0.425); +#23908 = AXIS2_PLACEMENT_3D('',#23909,#23910,#23911); +#23909 = CARTESIAN_POINT('',(7.865,6.075,0.1)); +#23910 = DIRECTION('',(-0.,0.,1.)); +#23911 = DIRECTION('',(0.,-1.,0.)); +#23912 = FACE_BOUND('',#23913,.T.); +#23913 = EDGE_LOOP('',(#23914)); +#23914 = ORIENTED_EDGE('',*,*,#23915,.T.); +#23915 = EDGE_CURVE('',#23916,#23916,#23918,.T.); +#23916 = VERTEX_POINT('',#23917); +#23917 = CARTESIAN_POINT('',(2.79,0.,0.1)); +#23918 = CIRCLE('',#23919,0.25); +#23919 = AXIS2_PLACEMENT_3D('',#23920,#23921,#23922); +#23920 = CARTESIAN_POINT('',(2.54,0.,0.1)); +#23921 = DIRECTION('',(0.,0.,1.)); +#23922 = DIRECTION('',(1.,0.,-0.)); +#23923 = FACE_BOUND('',#23924,.T.); +#23924 = EDGE_LOOP('',(#23925)); +#23925 = ORIENTED_EDGE('',*,*,#23811,.T.); +#23926 = FACE_BOUND('',#23927,.T.); +#23927 = EDGE_LOOP('',(#23928)); +#23928 = ORIENTED_EDGE('',*,*,#23929,.T.); +#23929 = EDGE_CURVE('',#23930,#23930,#23932,.T.); +#23930 = VERTEX_POINT('',#23931); +#23931 = CARTESIAN_POINT('',(0.25,0.,0.1)); +#23932 = CIRCLE('',#23933,0.25); +#23933 = AXIS2_PLACEMENT_3D('',#23934,#23935,#23936); +#23934 = CARTESIAN_POINT('',(0.,0.,0.1)); +#23935 = DIRECTION('',(0.,0.,1.)); +#23936 = DIRECTION('',(1.,0.,-0.)); +#23937 = PLANE('',#23938); +#23938 = AXIS2_PLACEMENT_3D('',#23939,#23940,#23941); +#23939 = CARTESIAN_POINT('',(2.49,2.25,0.1)); +#23940 = DIRECTION('',(-0.,-0.,-1.)); +#23941 = DIRECTION('',(-1.,0.,0.)); +#23942 = ADVANCED_FACE('',(#23943),#23968,.T.); +#23943 = FACE_BOUND('',#23944,.T.); +#23944 = EDGE_LOOP('',(#23945,#23953,#23961,#23967)); +#23945 = ORIENTED_EDGE('',*,*,#23946,.T.); +#23946 = EDGE_CURVE('',#23846,#23947,#23949,.T.); +#23947 = VERTEX_POINT('',#23948); +#23948 = CARTESIAN_POINT('',(8.29,6.075,10.2875)); +#23949 = LINE('',#23950,#23951); +#23950 = CARTESIAN_POINT('',(8.29,6.075,0.1)); +#23951 = VECTOR('',#23952,1.); +#23952 = DIRECTION('',(0.,0.,1.)); +#23953 = ORIENTED_EDGE('',*,*,#23954,.T.); +#23954 = EDGE_CURVE('',#23947,#23955,#23957,.T.); +#23955 = VERTEX_POINT('',#23956); +#23956 = CARTESIAN_POINT('',(8.29,-1.575,10.2875)); +#23957 = LINE('',#23958,#23959); +#23958 = CARTESIAN_POINT('',(8.29,6.075,10.2875)); +#23959 = VECTOR('',#23960,1.); +#23960 = DIRECTION('',(0.,-1.,0.)); +#23961 = ORIENTED_EDGE('',*,*,#23962,.F.); +#23962 = EDGE_CURVE('',#23848,#23955,#23963,.T.); +#23963 = LINE('',#23964,#23965); +#23964 = CARTESIAN_POINT('',(8.29,-1.575,0.1)); +#23965 = VECTOR('',#23966,1.); +#23966 = DIRECTION('',(0.,0.,1.)); +#23967 = ORIENTED_EDGE('',*,*,#23845,.F.); +#23968 = PLANE('',#23969); +#23969 = AXIS2_PLACEMENT_3D('',#23970,#23971,#23972); +#23970 = CARTESIAN_POINT('',(8.29,6.5,0.1)); +#23971 = DIRECTION('',(1.,0.,0.)); +#23972 = DIRECTION('',(0.,-1.,0.)); +#23973 = ADVANCED_FACE('',(#23974),#23993,.T.); +#23974 = FACE_BOUND('',#23975,.T.); +#23975 = EDGE_LOOP('',(#23976,#23977,#23978,#23986)); +#23976 = ORIENTED_EDGE('',*,*,#23946,.F.); +#23977 = ORIENTED_EDGE('',*,*,#23906,.T.); +#23978 = ORIENTED_EDGE('',*,*,#23979,.T.); +#23979 = EDGE_CURVE('',#23899,#23980,#23982,.T.); +#23980 = VERTEX_POINT('',#23981); +#23981 = CARTESIAN_POINT('',(7.865,6.5,10.2875)); +#23982 = LINE('',#23983,#23984); +#23983 = CARTESIAN_POINT('',(7.865,6.5,0.1)); +#23984 = VECTOR('',#23985,1.); +#23985 = DIRECTION('',(0.,0.,1.)); +#23986 = ORIENTED_EDGE('',*,*,#23987,.T.); +#23987 = EDGE_CURVE('',#23980,#23947,#23988,.T.); +#23988 = CIRCLE('',#23989,0.425); +#23989 = AXIS2_PLACEMENT_3D('',#23990,#23991,#23992); +#23990 = CARTESIAN_POINT('',(7.865,6.075,10.2875)); +#23991 = DIRECTION('',(0.,0.,-1.)); +#23992 = DIRECTION('',(0.,1.,0.)); +#23993 = CYLINDRICAL_SURFACE('',#23994,0.425); +#23994 = AXIS2_PLACEMENT_3D('',#23995,#23996,#23997); +#23995 = CARTESIAN_POINT('',(7.865,6.075,0.1)); +#23996 = DIRECTION('',(0.,0.,1.)); +#23997 = DIRECTION('',(1.,0.,-0.)); +#23998 = ADVANCED_FACE('',(#23999),#24018,.T.); +#23999 = FACE_BOUND('',#24000,.T.); +#24000 = EDGE_LOOP('',(#24001,#24009,#24010,#24011)); +#24001 = ORIENTED_EDGE('',*,*,#24002,.F.); +#24002 = EDGE_CURVE('',#23856,#24003,#24005,.T.); +#24003 = VERTEX_POINT('',#24004); +#24004 = CARTESIAN_POINT('',(7.865,-2.,10.2875)); +#24005 = LINE('',#24006,#24007); +#24006 = CARTESIAN_POINT('',(7.865,-2.,0.1)); +#24007 = VECTOR('',#24008,1.); +#24008 = DIRECTION('',(0.,0.,1.)); +#24009 = ORIENTED_EDGE('',*,*,#23855,.T.); +#24010 = ORIENTED_EDGE('',*,*,#23962,.T.); +#24011 = ORIENTED_EDGE('',*,*,#24012,.T.); +#24012 = EDGE_CURVE('',#23955,#24003,#24013,.T.); +#24013 = CIRCLE('',#24014,0.425); +#24014 = AXIS2_PLACEMENT_3D('',#24015,#24016,#24017); +#24015 = CARTESIAN_POINT('',(7.865,-1.575,10.2875)); +#24016 = DIRECTION('',(0.,0.,-1.)); +#24017 = DIRECTION('',(1.,1.044915787883E-15,0.)); +#24018 = CYLINDRICAL_SURFACE('',#24019,0.425); +#24019 = AXIS2_PLACEMENT_3D('',#24020,#24021,#24022); +#24020 = CARTESIAN_POINT('',(7.865,-1.575,0.1)); +#24021 = DIRECTION('',(0.,0.,1.)); +#24022 = DIRECTION('',(0.,-1.,0.)); +#24023 = ADVANCED_FACE('',(#24024),#24042,.T.); +#24024 = FACE_BOUND('',#24025,.T.); +#24025 = EDGE_LOOP('',(#24026,#24027,#24028,#24036)); +#24026 = ORIENTED_EDGE('',*,*,#23979,.F.); +#24027 = ORIENTED_EDGE('',*,*,#23898,.F.); +#24028 = ORIENTED_EDGE('',*,*,#24029,.T.); +#24029 = EDGE_CURVE('',#23890,#24030,#24032,.T.); +#24030 = VERTEX_POINT('',#24031); +#24031 = CARTESIAN_POINT('',(-2.885,6.5,10.2875)); +#24032 = LINE('',#24033,#24034); +#24033 = CARTESIAN_POINT('',(-2.885,6.5,0.1)); +#24034 = VECTOR('',#24035,1.); +#24035 = DIRECTION('',(0.,0.,1.)); +#24036 = ORIENTED_EDGE('',*,*,#24037,.T.); +#24037 = EDGE_CURVE('',#24030,#23980,#24038,.T.); +#24038 = LINE('',#24039,#24040); +#24039 = CARTESIAN_POINT('',(-2.885,6.5,10.2875)); +#24040 = VECTOR('',#24041,1.); +#24041 = DIRECTION('',(1.,0.,0.)); +#24042 = PLANE('',#24043); +#24043 = AXIS2_PLACEMENT_3D('',#24044,#24045,#24046); +#24044 = CARTESIAN_POINT('',(-3.31,6.5,0.1)); +#24045 = DIRECTION('',(0.,1.,0.)); +#24046 = DIRECTION('',(1.,0.,0.)); +#24047 = ADVANCED_FACE('',(#24048),#24066,.T.); +#24048 = FACE_BOUND('',#24049,.T.); +#24049 = EDGE_LOOP('',(#24050,#24051,#24059,#24065)); +#24050 = ORIENTED_EDGE('',*,*,#24002,.T.); +#24051 = ORIENTED_EDGE('',*,*,#24052,.T.); +#24052 = EDGE_CURVE('',#24003,#24053,#24055,.T.); +#24053 = VERTEX_POINT('',#24054); +#24054 = CARTESIAN_POINT('',(-2.885,-2.,10.2875)); +#24055 = LINE('',#24056,#24057); +#24056 = CARTESIAN_POINT('',(7.865,-2.,10.2875)); +#24057 = VECTOR('',#24058,1.); +#24058 = DIRECTION('',(-1.,0.,0.)); +#24059 = ORIENTED_EDGE('',*,*,#24060,.F.); +#24060 = EDGE_CURVE('',#23865,#24053,#24061,.T.); +#24061 = LINE('',#24062,#24063); +#24062 = CARTESIAN_POINT('',(-2.885,-2.,0.1)); +#24063 = VECTOR('',#24064,1.); +#24064 = DIRECTION('',(0.,0.,1.)); +#24065 = ORIENTED_EDGE('',*,*,#23864,.F.); +#24066 = PLANE('',#24067); +#24067 = AXIS2_PLACEMENT_3D('',#24068,#24069,#24070); +#24068 = CARTESIAN_POINT('',(8.29,-2.,0.1)); +#24069 = DIRECTION('',(0.,-1.,0.)); +#24070 = DIRECTION('',(-1.,0.,0.)); +#24071 = ADVANCED_FACE('',(#24072),#24091,.T.); +#24072 = FACE_BOUND('',#24073,.T.); +#24073 = EDGE_LOOP('',(#24074,#24083,#24084,#24085)); +#24074 = ORIENTED_EDGE('',*,*,#24075,.T.); +#24075 = EDGE_CURVE('',#24076,#24030,#24078,.T.); +#24076 = VERTEX_POINT('',#24077); +#24077 = CARTESIAN_POINT('',(-3.31,6.075,10.2875)); +#24078 = CIRCLE('',#24079,0.425); +#24079 = AXIS2_PLACEMENT_3D('',#24080,#24081,#24082); +#24080 = CARTESIAN_POINT('',(-2.885,6.075,10.2875)); +#24081 = DIRECTION('',(0.,0.,-1.)); +#24082 = DIRECTION('',(-1.,2.089831575765E-15,0.)); +#24083 = ORIENTED_EDGE('',*,*,#24029,.F.); +#24084 = ORIENTED_EDGE('',*,*,#23889,.F.); +#24085 = ORIENTED_EDGE('',*,*,#24086,.T.); +#24086 = EDGE_CURVE('',#23882,#24076,#24087,.T.); +#24087 = LINE('',#24088,#24089); +#24088 = CARTESIAN_POINT('',(-3.31,6.075,0.1)); +#24089 = VECTOR('',#24090,1.); +#24090 = DIRECTION('',(0.,0.,1.)); +#24091 = CYLINDRICAL_SURFACE('',#24092,0.425); +#24092 = AXIS2_PLACEMENT_3D('',#24093,#24094,#24095); +#24093 = CARTESIAN_POINT('',(-2.885,6.075,0.1)); +#24094 = DIRECTION('',(0.,0.,1.)); +#24095 = DIRECTION('',(-1.,0.,0.)); +#24096 = ADVANCED_FACE('',(#24097),#24116,.T.); +#24097 = FACE_BOUND('',#24098,.T.); +#24098 = EDGE_LOOP('',(#24099,#24108,#24114,#24115)); +#24099 = ORIENTED_EDGE('',*,*,#24100,.T.); +#24100 = EDGE_CURVE('',#24053,#24101,#24103,.T.); +#24101 = VERTEX_POINT('',#24102); +#24102 = CARTESIAN_POINT('',(-3.31,-1.575,10.2875)); +#24103 = CIRCLE('',#24104,0.425); +#24104 = AXIS2_PLACEMENT_3D('',#24105,#24106,#24107); +#24105 = CARTESIAN_POINT('',(-2.885,-1.575,10.2875)); +#24106 = DIRECTION('',(-0.,0.,-1.)); +#24107 = DIRECTION('',(-1.044915787883E-15,-1.,0.)); +#24108 = ORIENTED_EDGE('',*,*,#24109,.F.); +#24109 = EDGE_CURVE('',#23873,#24101,#24110,.T.); +#24110 = LINE('',#24111,#24112); +#24111 = CARTESIAN_POINT('',(-3.31,-1.575,0.1)); +#24112 = VECTOR('',#24113,1.); +#24113 = DIRECTION('',(0.,0.,1.)); +#24114 = ORIENTED_EDGE('',*,*,#23872,.F.); +#24115 = ORIENTED_EDGE('',*,*,#24060,.T.); +#24116 = CYLINDRICAL_SURFACE('',#24117,0.425); +#24117 = AXIS2_PLACEMENT_3D('',#24118,#24119,#24120); +#24118 = CARTESIAN_POINT('',(-2.885,-1.575,0.1)); +#24119 = DIRECTION('',(0.,0.,1.)); +#24120 = DIRECTION('',(0.,-1.,0.)); +#24121 = ADVANCED_FACE('',(#24122),#24133,.T.); +#24122 = FACE_BOUND('',#24123,.T.); +#24123 = EDGE_LOOP('',(#24124,#24125,#24126,#24127)); +#24124 = ORIENTED_EDGE('',*,*,#24086,.F.); +#24125 = ORIENTED_EDGE('',*,*,#23881,.F.); +#24126 = ORIENTED_EDGE('',*,*,#24109,.T.); +#24127 = ORIENTED_EDGE('',*,*,#24128,.T.); +#24128 = EDGE_CURVE('',#24101,#24076,#24129,.T.); +#24129 = LINE('',#24130,#24131); +#24130 = CARTESIAN_POINT('',(-3.31,-1.575,10.2875)); +#24131 = VECTOR('',#24132,1.); +#24132 = DIRECTION('',(0.,1.,0.)); +#24133 = PLANE('',#24134); +#24134 = AXIS2_PLACEMENT_3D('',#24135,#24136,#24137); +#24135 = CARTESIAN_POINT('',(-3.31,-2.,0.1)); +#24136 = DIRECTION('',(-1.,0.,0.)); +#24137 = DIRECTION('',(0.,1.,0.)); +#24138 = ADVANCED_FACE('',(#24139),#24158,.T.); +#24139 = FACE_BOUND('',#24140,.T.); +#24140 = EDGE_LOOP('',(#24141,#24142,#24150,#24157)); +#24141 = ORIENTED_EDGE('',*,*,#23915,.F.); +#24142 = ORIENTED_EDGE('',*,*,#24143,.T.); +#24143 = EDGE_CURVE('',#23916,#24144,#24146,.T.); +#24144 = VERTEX_POINT('',#24145); +#24145 = CARTESIAN_POINT('',(2.79,-4.08046586736E-34,-3.9)); +#24146 = LINE('',#24147,#24148); +#24147 = CARTESIAN_POINT('',(2.79,0.,0.2)); +#24148 = VECTOR('',#24149,1.); +#24149 = DIRECTION('',(-0.,-0.,-1.)); +#24150 = ORIENTED_EDGE('',*,*,#24151,.T.); +#24151 = EDGE_CURVE('',#24144,#24144,#24152,.T.); +#24152 = CIRCLE('',#24153,0.25); +#24153 = AXIS2_PLACEMENT_3D('',#24154,#24155,#24156); +#24154 = CARTESIAN_POINT('',(2.54,1.499939296836E-32,-3.9)); +#24155 = DIRECTION('',(-3.985391031585E-31,-4.08046586736E-33,1.)); +#24156 = DIRECTION('',(1.,-6.162975822039E-32,3.985391031585E-31)); +#24157 = ORIENTED_EDGE('',*,*,#24143,.F.); +#24158 = CYLINDRICAL_SURFACE('',#24159,0.25); +#24159 = AXIS2_PLACEMENT_3D('',#24160,#24161,#24162); +#24160 = CARTESIAN_POINT('',(2.54,0.,0.2)); +#24161 = DIRECTION('',(0.,0.,1.)); +#24162 = DIRECTION('',(1.,0.,-0.)); +#24163 = ADVANCED_FACE('',(#24164),#24183,.T.); +#24164 = FACE_BOUND('',#24165,.T.); +#24165 = EDGE_LOOP('',(#24166,#24167,#24175,#24182)); +#24166 = ORIENTED_EDGE('',*,*,#23929,.F.); +#24167 = ORIENTED_EDGE('',*,*,#24168,.T.); +#24168 = EDGE_CURVE('',#23930,#24169,#24171,.T.); +#24169 = VERTEX_POINT('',#24170); +#24170 = CARTESIAN_POINT('',(0.25,-4.08046586736E-34,-3.9)); +#24171 = LINE('',#24172,#24173); +#24172 = CARTESIAN_POINT('',(0.25,0.,0.2)); +#24173 = VECTOR('',#24174,1.); +#24174 = DIRECTION('',(-0.,-0.,-1.)); +#24175 = ORIENTED_EDGE('',*,*,#24176,.T.); +#24176 = EDGE_CURVE('',#24169,#24169,#24177,.T.); +#24177 = CIRCLE('',#24178,0.25); +#24178 = AXIS2_PLACEMENT_3D('',#24179,#24180,#24181); +#24179 = CARTESIAN_POINT('',(-3.615612482263E-32,1.499939296836E-32,-3.9 + )); +#24180 = DIRECTION('',(8.217301096052E-33,-4.08046586736E-33,1.)); +#24181 = DIRECTION('',(1.,-6.162975822039E-32,-8.217301096052E-33)); +#24182 = ORIENTED_EDGE('',*,*,#24168,.F.); +#24183 = CYLINDRICAL_SURFACE('',#24184,0.25); +#24184 = AXIS2_PLACEMENT_3D('',#24185,#24186,#24187); +#24185 = CARTESIAN_POINT('',(0.,0.,0.2)); +#24186 = DIRECTION('',(0.,0.,1.)); +#24187 = DIRECTION('',(1.,0.,-0.)); +#24188 = ADVANCED_FACE('',(#24189),#24216,.T.); +#24189 = FACE_BOUND('',#24190,.T.); +#24190 = EDGE_LOOP('',(#24191,#24200,#24208,#24215)); +#24191 = ORIENTED_EDGE('',*,*,#24192,.T.); +#24192 = EDGE_CURVE('',#23947,#24193,#24195,.T.); +#24193 = VERTEX_POINT('',#24194); +#24194 = CARTESIAN_POINT('',(8.0775,6.075,10.5)); +#24195 = CIRCLE('',#24196,0.2125); +#24196 = AXIS2_PLACEMENT_3D('',#24197,#24198,#24199); +#24197 = CARTESIAN_POINT('',(8.0775,6.075,10.2875)); +#24198 = DIRECTION('',(6.123233995737E-17,-1.,0.)); +#24199 = DIRECTION('',(1.,6.123233995737E-17,0.)); +#24200 = ORIENTED_EDGE('',*,*,#24201,.T.); +#24201 = EDGE_CURVE('',#24193,#24202,#24204,.T.); +#24202 = VERTEX_POINT('',#24203); +#24203 = CARTESIAN_POINT('',(8.0775,-1.575,10.5)); +#24204 = LINE('',#24205,#24206); +#24205 = CARTESIAN_POINT('',(8.0775,6.075,10.5)); +#24206 = VECTOR('',#24207,1.); +#24207 = DIRECTION('',(0.,-1.,0.)); +#24208 = ORIENTED_EDGE('',*,*,#24209,.F.); +#24209 = EDGE_CURVE('',#23955,#24202,#24210,.T.); +#24210 = CIRCLE('',#24211,0.2125); +#24211 = AXIS2_PLACEMENT_3D('',#24212,#24213,#24214); +#24212 = CARTESIAN_POINT('',(8.0775,-1.575,10.2875)); +#24213 = DIRECTION('',(0.,-1.,0.)); +#24214 = DIRECTION('',(1.,0.,0.)); +#24215 = ORIENTED_EDGE('',*,*,#23954,.F.); +#24216 = CYLINDRICAL_SURFACE('',#24217,0.2125); +#24217 = AXIS2_PLACEMENT_3D('',#24218,#24219,#24220); +#24218 = CARTESIAN_POINT('',(8.0775,6.075,10.2875)); +#24219 = DIRECTION('',(0.,-1.,0.)); +#24220 = DIRECTION('',(1.,0.,0.)); +#24221 = ADVANCED_FACE('',(#24222),#24242,.T.); +#24222 = FACE_BOUND('',#24223,.T.); +#24223 = EDGE_LOOP('',(#24224,#24233,#24234,#24235)); +#24224 = ORIENTED_EDGE('',*,*,#24225,.T.); +#24225 = EDGE_CURVE('',#24226,#24193,#24228,.T.); +#24226 = VERTEX_POINT('',#24227); +#24227 = CARTESIAN_POINT('',(7.865,6.2875,10.5)); +#24228 = CIRCLE('',#24229,0.2125); +#24229 = AXIS2_PLACEMENT_3D('',#24230,#24231,#24232); +#24230 = CARTESIAN_POINT('',(7.865,6.075,10.5)); +#24231 = DIRECTION('',(0.,0.,-1.)); +#24232 = DIRECTION('',(0.,1.,0.)); +#24233 = ORIENTED_EDGE('',*,*,#24192,.F.); +#24234 = ORIENTED_EDGE('',*,*,#23987,.F.); +#24235 = ORIENTED_EDGE('',*,*,#24236,.T.); +#24236 = EDGE_CURVE('',#23980,#24226,#24237,.T.); +#24237 = CIRCLE('',#24238,0.2125); +#24238 = AXIS2_PLACEMENT_3D('',#24239,#24240,#24241); +#24239 = CARTESIAN_POINT('',(7.865,6.2875,10.2875)); +#24240 = DIRECTION('',(1.,0.,0.)); +#24241 = DIRECTION('',(-0.,1.,0.)); +#24242 = TOROIDAL_SURFACE('',#24243,0.2125,0.2125); +#24243 = AXIS2_PLACEMENT_3D('',#24244,#24245,#24246); +#24244 = CARTESIAN_POINT('',(7.865,6.075,10.2875)); +#24245 = DIRECTION('',(0.,0.,1.)); +#24246 = DIRECTION('',(0.,1.,0.)); +#24247 = ADVANCED_FACE('',(#24248),#24268,.T.); +#24248 = FACE_BOUND('',#24249,.T.); +#24249 = EDGE_LOOP('',(#24250,#24259,#24266,#24267)); +#24250 = ORIENTED_EDGE('',*,*,#24251,.T.); +#24251 = EDGE_CURVE('',#24202,#24252,#24254,.T.); +#24252 = VERTEX_POINT('',#24253); +#24253 = CARTESIAN_POINT('',(7.865,-1.7875,10.5)); +#24254 = CIRCLE('',#24255,0.2125); +#24255 = AXIS2_PLACEMENT_3D('',#24256,#24257,#24258); +#24256 = CARTESIAN_POINT('',(7.865,-1.575,10.5)); +#24257 = DIRECTION('',(0.,0.,-1.)); +#24258 = DIRECTION('',(1.,1.044915787883E-15,0.)); +#24259 = ORIENTED_EDGE('',*,*,#24260,.F.); +#24260 = EDGE_CURVE('',#24003,#24252,#24261,.T.); +#24261 = CIRCLE('',#24262,0.2125); +#24262 = AXIS2_PLACEMENT_3D('',#24263,#24264,#24265); +#24263 = CARTESIAN_POINT('',(7.865,-1.7875,10.2875)); +#24264 = DIRECTION('',(-1.,4.074896785288E-18,0.)); +#24265 = DIRECTION('',(-4.074896785288E-18,-1.,-0.)); +#24266 = ORIENTED_EDGE('',*,*,#24012,.F.); +#24267 = ORIENTED_EDGE('',*,*,#24209,.T.); +#24268 = TOROIDAL_SURFACE('',#24269,0.2125,0.2125); +#24269 = AXIS2_PLACEMENT_3D('',#24270,#24271,#24272); +#24270 = CARTESIAN_POINT('',(7.865,-1.575,10.2875)); +#24271 = DIRECTION('',(0.,0.,1.)); +#24272 = DIRECTION('',(1.,1.044915787883E-15,-0.)); +#24273 = ADVANCED_FACE('',(#24274),#24293,.T.); +#24274 = FACE_BOUND('',#24275,.T.); +#24275 = EDGE_LOOP('',(#24276,#24285,#24291,#24292)); +#24276 = ORIENTED_EDGE('',*,*,#24277,.T.); +#24277 = EDGE_CURVE('',#24030,#24278,#24280,.T.); +#24278 = VERTEX_POINT('',#24279); +#24279 = CARTESIAN_POINT('',(-2.885,6.2875,10.5)); +#24280 = CIRCLE('',#24281,0.2125); +#24281 = AXIS2_PLACEMENT_3D('',#24282,#24283,#24284); +#24282 = CARTESIAN_POINT('',(-2.885,6.2875,10.2875)); +#24283 = DIRECTION('',(1.,0.,0.)); +#24284 = DIRECTION('',(-0.,1.,0.)); +#24285 = ORIENTED_EDGE('',*,*,#24286,.T.); +#24286 = EDGE_CURVE('',#24278,#24226,#24287,.T.); +#24287 = LINE('',#24288,#24289); +#24288 = CARTESIAN_POINT('',(-2.885,6.2875,10.5)); +#24289 = VECTOR('',#24290,1.); +#24290 = DIRECTION('',(1.,0.,0.)); +#24291 = ORIENTED_EDGE('',*,*,#24236,.F.); +#24292 = ORIENTED_EDGE('',*,*,#24037,.F.); +#24293 = CYLINDRICAL_SURFACE('',#24294,0.2125); +#24294 = AXIS2_PLACEMENT_3D('',#24295,#24296,#24297); +#24295 = CARTESIAN_POINT('',(-2.885,6.2875,10.2875)); +#24296 = DIRECTION('',(1.,0.,0.)); +#24297 = DIRECTION('',(-0.,1.,0.)); +#24298 = ADVANCED_FACE('',(#24299),#24318,.T.); +#24299 = FACE_BOUND('',#24300,.T.); +#24300 = EDGE_LOOP('',(#24301,#24302,#24310,#24317)); +#24301 = ORIENTED_EDGE('',*,*,#24260,.T.); +#24302 = ORIENTED_EDGE('',*,*,#24303,.T.); +#24303 = EDGE_CURVE('',#24252,#24304,#24306,.T.); +#24304 = VERTEX_POINT('',#24305); +#24305 = CARTESIAN_POINT('',(-2.885,-1.7875,10.5)); +#24306 = LINE('',#24307,#24308); +#24307 = CARTESIAN_POINT('',(7.865,-1.7875,10.5)); +#24308 = VECTOR('',#24309,1.); +#24309 = DIRECTION('',(-1.,0.,0.)); +#24310 = ORIENTED_EDGE('',*,*,#24311,.F.); +#24311 = EDGE_CURVE('',#24053,#24304,#24312,.T.); +#24312 = CIRCLE('',#24313,0.2125); +#24313 = AXIS2_PLACEMENT_3D('',#24314,#24315,#24316); +#24314 = CARTESIAN_POINT('',(-2.885,-1.7875,10.2875)); +#24315 = DIRECTION('',(-1.,0.,0.)); +#24316 = DIRECTION('',(0.,-1.,0.)); +#24317 = ORIENTED_EDGE('',*,*,#24052,.F.); +#24318 = CYLINDRICAL_SURFACE('',#24319,0.2125); +#24319 = AXIS2_PLACEMENT_3D('',#24320,#24321,#24322); +#24320 = CARTESIAN_POINT('',(7.865,-1.7875,10.2875)); +#24321 = DIRECTION('',(-1.,0.,0.)); +#24322 = DIRECTION('',(0.,-1.,0.)); +#24323 = ADVANCED_FACE('',(#24324),#24344,.T.); +#24324 = FACE_BOUND('',#24325,.T.); +#24325 = EDGE_LOOP('',(#24326,#24335,#24336,#24337)); +#24326 = ORIENTED_EDGE('',*,*,#24327,.T.); +#24327 = EDGE_CURVE('',#24328,#24278,#24330,.T.); +#24328 = VERTEX_POINT('',#24329); +#24329 = CARTESIAN_POINT('',(-3.0975,6.075,10.5)); +#24330 = CIRCLE('',#24331,0.2125); +#24331 = AXIS2_PLACEMENT_3D('',#24332,#24333,#24334); +#24332 = CARTESIAN_POINT('',(-2.885,6.075,10.5)); +#24333 = DIRECTION('',(0.,0.,-1.)); +#24334 = DIRECTION('',(-1.,2.089831575765E-15,0.)); +#24335 = ORIENTED_EDGE('',*,*,#24277,.F.); +#24336 = ORIENTED_EDGE('',*,*,#24075,.F.); +#24337 = ORIENTED_EDGE('',*,*,#24338,.T.); +#24338 = EDGE_CURVE('',#24076,#24328,#24339,.T.); +#24339 = CIRCLE('',#24340,0.2125); +#24340 = AXIS2_PLACEMENT_3D('',#24341,#24342,#24343); +#24341 = CARTESIAN_POINT('',(-3.0975,6.075,10.2875)); +#24342 = DIRECTION('',(0.,1.,-0.)); +#24343 = DIRECTION('',(-1.,0.,0.)); +#24344 = TOROIDAL_SURFACE('',#24345,0.2125,0.2125); +#24345 = AXIS2_PLACEMENT_3D('',#24346,#24347,#24348); +#24346 = CARTESIAN_POINT('',(-2.885,6.075,10.2875)); +#24347 = DIRECTION('',(0.,0.,1.)); +#24348 = DIRECTION('',(-1.,2.089831575765E-15,0.)); +#24349 = ADVANCED_FACE('',(#24350),#24370,.T.); +#24350 = FACE_BOUND('',#24351,.T.); +#24351 = EDGE_LOOP('',(#24352,#24361,#24368,#24369)); +#24352 = ORIENTED_EDGE('',*,*,#24353,.T.); +#24353 = EDGE_CURVE('',#24304,#24354,#24356,.T.); +#24354 = VERTEX_POINT('',#24355); +#24355 = CARTESIAN_POINT('',(-3.0975,-1.575,10.5)); +#24356 = CIRCLE('',#24357,0.2125); +#24357 = AXIS2_PLACEMENT_3D('',#24358,#24359,#24360); +#24358 = CARTESIAN_POINT('',(-2.885,-1.575,10.5)); +#24359 = DIRECTION('',(-0.,0.,-1.)); +#24360 = DIRECTION('',(-1.044915787883E-15,-1.,0.)); +#24361 = ORIENTED_EDGE('',*,*,#24362,.F.); +#24362 = EDGE_CURVE('',#24101,#24354,#24363,.T.); +#24363 = CIRCLE('',#24364,0.2125); +#24364 = AXIS2_PLACEMENT_3D('',#24365,#24366,#24367); +#24365 = CARTESIAN_POINT('',(-3.0975,-1.575,10.2875)); +#24366 = DIRECTION('',(-1.265395767E-16,1.,0.)); +#24367 = DIRECTION('',(-1.,-1.265395767E-16,0.)); +#24368 = ORIENTED_EDGE('',*,*,#24100,.F.); +#24369 = ORIENTED_EDGE('',*,*,#24311,.T.); +#24370 = TOROIDAL_SURFACE('',#24371,0.2125,0.2125); +#24371 = AXIS2_PLACEMENT_3D('',#24372,#24373,#24374); +#24372 = CARTESIAN_POINT('',(-2.885,-1.575,10.2875)); +#24373 = DIRECTION('',(0.,0.,1.)); +#24374 = DIRECTION('',(-1.044915787883E-15,-1.,0.)); +#24375 = ADVANCED_FACE('',(#24376),#24387,.T.); +#24376 = FACE_BOUND('',#24377,.T.); +#24377 = EDGE_LOOP('',(#24378,#24379,#24385,#24386)); +#24378 = ORIENTED_EDGE('',*,*,#24362,.T.); +#24379 = ORIENTED_EDGE('',*,*,#24380,.T.); +#24380 = EDGE_CURVE('',#24354,#24328,#24381,.T.); +#24381 = LINE('',#24382,#24383); +#24382 = CARTESIAN_POINT('',(-3.0975,-1.575,10.5)); +#24383 = VECTOR('',#24384,1.); +#24384 = DIRECTION('',(0.,1.,0.)); +#24385 = ORIENTED_EDGE('',*,*,#24338,.F.); +#24386 = ORIENTED_EDGE('',*,*,#24128,.F.); +#24387 = CYLINDRICAL_SURFACE('',#24388,0.2125); +#24388 = AXIS2_PLACEMENT_3D('',#24389,#24390,#24391); +#24389 = CARTESIAN_POINT('',(-3.0975,-1.575,10.2875)); +#24390 = DIRECTION('',(0.,1.,0.)); +#24391 = DIRECTION('',(-1.,0.,0.)); +#24392 = ADVANCED_FACE('',(#24393),#24413,.T.); +#24393 = FACE_BOUND('',#24394,.T.); +#24394 = EDGE_LOOP('',(#24395,#24404,#24411,#24412)); +#24395 = ORIENTED_EDGE('',*,*,#24396,.T.); +#24396 = EDGE_CURVE('',#24397,#24397,#24399,.T.); +#24397 = VERTEX_POINT('',#24398); +#24398 = CARTESIAN_POINT('',(2.69,6.162975822039E-33,-4.)); +#24399 = CIRCLE('',#24400,0.15); +#24400 = AXIS2_PLACEMENT_3D('',#24401,#24402,#24403); +#24401 = CARTESIAN_POINT('',(2.54,1.54074395551E-32,-4.)); +#24402 = DIRECTION('',(-3.985391031585E-31,-4.08046586736E-33,1.)); +#24403 = DIRECTION('',(1.,-6.162975822039E-32,3.985391031585E-31)); +#24404 = ORIENTED_EDGE('',*,*,#24405,.F.); +#24405 = EDGE_CURVE('',#24144,#24397,#24406,.T.); +#24406 = CIRCLE('',#24407,0.1); +#24407 = AXIS2_PLACEMENT_3D('',#24408,#24409,#24410); +#24408 = CARTESIAN_POINT('',(2.69,5.754929235303E-33,-3.9)); +#24409 = DIRECTION('',(6.162975822039E-32,1.,4.08046586736E-33)); +#24410 = DIRECTION('',(1.,-6.162975822039E-32,3.985391031585E-31)); +#24411 = ORIENTED_EDGE('',*,*,#24151,.F.); +#24412 = ORIENTED_EDGE('',*,*,#24405,.T.); +#24413 = TOROIDAL_SURFACE('',#24414,0.15,0.1); +#24414 = AXIS2_PLACEMENT_3D('',#24415,#24416,#24417); +#24415 = CARTESIAN_POINT('',(2.54,1.499939296836E-32,-3.9)); +#24416 = DIRECTION('',(3.985391031585E-31,4.08046586736E-33,-1.)); +#24417 = DIRECTION('',(1.,-6.162975822039E-32,3.985391031585E-31)); +#24418 = ADVANCED_FACE('',(#24419),#24439,.T.); +#24419 = FACE_BOUND('',#24420,.T.); +#24420 = EDGE_LOOP('',(#24421,#24430,#24437,#24438)); +#24421 = ORIENTED_EDGE('',*,*,#24422,.T.); +#24422 = EDGE_CURVE('',#24423,#24423,#24425,.T.); +#24423 = VERTEX_POINT('',#24424); +#24424 = CARTESIAN_POINT('',(0.15,6.162975822039E-33,-4.)); +#24425 = CIRCLE('',#24426,0.15); +#24426 = AXIS2_PLACEMENT_3D('',#24427,#24428,#24429); +#24427 = CARTESIAN_POINT('',(-3.697785493223E-32,1.54074395551E-32,-4.) + ); +#24428 = DIRECTION('',(8.217301096052E-33,-4.08046586736E-33,1.)); +#24429 = DIRECTION('',(1.,-6.162975822039E-32,-8.217301096052E-33)); +#24430 = ORIENTED_EDGE('',*,*,#24431,.F.); +#24431 = EDGE_CURVE('',#24169,#24423,#24432,.T.); +#24432 = CIRCLE('',#24433,0.1); +#24433 = AXIS2_PLACEMENT_3D('',#24434,#24435,#24436); +#24434 = CARTESIAN_POINT('',(0.15,5.754929235303E-33,-3.9)); +#24435 = DIRECTION('',(6.162975822039E-32,1.,4.08046586736E-33)); +#24436 = DIRECTION('',(1.,-6.162975822039E-32,-8.217301096052E-33)); +#24437 = ORIENTED_EDGE('',*,*,#24176,.F.); +#24438 = ORIENTED_EDGE('',*,*,#24431,.T.); +#24439 = TOROIDAL_SURFACE('',#24440,0.15,0.1); +#24440 = AXIS2_PLACEMENT_3D('',#24441,#24442,#24443); +#24441 = CARTESIAN_POINT('',(-3.615612482263E-32,1.499939296836E-32,-3.9 + )); +#24442 = DIRECTION('',(-8.217301096052E-33,4.08046586736E-33,-1.)); +#24443 = DIRECTION('',(1.,-6.162975822039E-32,-8.217301096052E-33)); +#24444 = ADVANCED_FACE('',(#24445),#24455,.F.); +#24445 = FACE_BOUND('',#24446,.F.); +#24446 = EDGE_LOOP('',(#24447,#24448,#24449,#24450,#24451,#24452,#24453, + #24454)); +#24447 = ORIENTED_EDGE('',*,*,#24286,.T.); +#24448 = ORIENTED_EDGE('',*,*,#24225,.T.); +#24449 = ORIENTED_EDGE('',*,*,#24201,.T.); +#24450 = ORIENTED_EDGE('',*,*,#24251,.T.); +#24451 = ORIENTED_EDGE('',*,*,#24303,.T.); +#24452 = ORIENTED_EDGE('',*,*,#24353,.T.); +#24453 = ORIENTED_EDGE('',*,*,#24380,.T.); +#24454 = ORIENTED_EDGE('',*,*,#24327,.T.); +#24455 = PLANE('',#24456); +#24456 = AXIS2_PLACEMENT_3D('',#24457,#24458,#24459); +#24457 = CARTESIAN_POINT('',(2.49,2.25,10.5)); +#24458 = DIRECTION('',(-0.,-0.,-1.)); +#24459 = DIRECTION('',(-1.,0.,0.)); +#24460 = ADVANCED_FACE('',(#24461),#24464,.F.); +#24461 = FACE_BOUND('',#24462,.F.); +#24462 = EDGE_LOOP('',(#24463)); +#24463 = ORIENTED_EDGE('',*,*,#24396,.T.); +#24464 = PLANE('',#24465); +#24465 = AXIS2_PLACEMENT_3D('',#24466,#24467,#24468); +#24466 = CARTESIAN_POINT('',(2.54,2.18439881135E-17,-4.)); +#24467 = DIRECTION('',(-3.985391031585E-31,-4.08046586736E-33,1.)); +#24468 = DIRECTION('',(1.,0.,3.985391031585E-31)); +#24469 = ADVANCED_FACE('',(#24470),#24473,.F.); +#24470 = FACE_BOUND('',#24471,.F.); +#24471 = EDGE_LOOP('',(#24472)); +#24472 = ORIENTED_EDGE('',*,*,#24422,.T.); +#24473 = PLANE('',#24474); +#24474 = AXIS2_PLACEMENT_3D('',#24475,#24476,#24477); +#24475 = CARTESIAN_POINT('',(-1.60246890532E-17,2.18439881135E-17,-4.)); +#24476 = DIRECTION('',(8.217301096052E-33,-4.08046586736E-33,1.)); +#24477 = DIRECTION('',(1.,0.,-8.217301096052E-33)); +#24478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#24482)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#24479,#24480,#24481)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#24479 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#24480 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#24481 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#24482 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#24479, + 'distance_accuracy_value','confusion accuracy'); +#24483 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#24484,#24486); +#24484 = ( REPRESENTATION_RELATIONSHIP('','',#23770,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#24485) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#24485 = ITEM_DEFINED_TRANSFORMATION('','',#11,#131); +#24486 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #24487); +#24487 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('30','PS1','',#5,#23765,$); +#24488 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#23767)); +#24489 = SHAPE_DEFINITION_REPRESENTATION(#24490,#24496); +#24490 = PRODUCT_DEFINITION_SHAPE('','',#24491); +#24491 = PRODUCT_DEFINITION('design','',#24492,#24495); +#24492 = PRODUCT_DEFINITION_FORMATION('','',#24493); +#24493 = PRODUCT('SOT-23','SOT-23','',(#24494)); +#24494 = PRODUCT_CONTEXT('',#2,'mechanical'); +#24495 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#24496 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#24497),#26479); +#24497 = MANIFOLD_SOLID_BREP('',#24498); +#24498 = CLOSED_SHELL('',(#24499,#24537,#24600,#24623,#24652,#24675, + #24730,#24769,#24792,#24815,#24832,#24855,#24943,#24959,#24989, + #25022,#25053,#25086,#25103,#25120,#25153,#25183,#25206,#25229, + #25246,#25275,#25329,#25352,#25375,#25398,#25437,#25459,#25503, + #25578,#25602,#25670,#25687,#25762,#25786,#25854,#25929,#25953, + #26021,#26038,#26055,#26101,#26117,#26133,#26150,#26162,#26179, + #26196,#26213,#26230,#26247,#26264,#26276,#26293,#26310,#26327, + #26344,#26361,#26373,#26390,#26407,#26424,#26441,#26458,#26470)); +#24499 = ADVANCED_FACE('',(#24500),#24532,.F.); +#24500 = FACE_BOUND('',#24501,.F.); +#24501 = EDGE_LOOP('',(#24502,#24512,#24519,#24527)); +#24502 = ORIENTED_EDGE('',*,*,#24503,.T.); +#24503 = EDGE_CURVE('',#24504,#24506,#24508,.T.); +#24504 = VERTEX_POINT('',#24505); +#24505 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#24506 = VERTEX_POINT('',#24507); +#24507 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#24508 = LINE('',#24509,#24510); +#24509 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#24510 = VECTOR('',#24511,1.); +#24511 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#24512 = ORIENTED_EDGE('',*,*,#24513,.T.); +#24513 = EDGE_CURVE('',#24506,#24514,#24516,.T.); +#24514 = VERTEX_POINT('',#24515); +#24515 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#24516 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24517,#24518),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24517 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#24518 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#24519 = ORIENTED_EDGE('',*,*,#24520,.F.); +#24520 = EDGE_CURVE('',#24521,#24514,#24523,.T.); +#24521 = VERTEX_POINT('',#24522); +#24522 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#24523 = LINE('',#24524,#24525); +#24524 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#24525 = VECTOR('',#24526,1.); +#24526 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#24527 = ORIENTED_EDGE('',*,*,#24528,.F.); +#24528 = EDGE_CURVE('',#24504,#24521,#24529,.T.); +#24529 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24530,#24531),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24530 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#24531 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#24532 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24533,#24534) + ,(#24535,#24536 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24533 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#24534 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#24535 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#24536 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#24537 = ADVANCED_FACE('',(#24538),#24595,.T.); +#24538 = FACE_BOUND('',#24539,.T.); +#24539 = EDGE_LOOP('',(#24540,#24541,#24549,#24557,#24565,#24573,#24581, + #24589)); +#24540 = ORIENTED_EDGE('',*,*,#24503,.T.); +#24541 = ORIENTED_EDGE('',*,*,#24542,.T.); +#24542 = EDGE_CURVE('',#24506,#24543,#24545,.T.); +#24543 = VERTEX_POINT('',#24544); +#24544 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#24545 = LINE('',#24546,#24547); +#24546 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#24547 = VECTOR('',#24548,1.); +#24548 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#24549 = ORIENTED_EDGE('',*,*,#24550,.T.); +#24550 = EDGE_CURVE('',#24543,#24551,#24553,.T.); +#24551 = VERTEX_POINT('',#24552); +#24552 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#24553 = LINE('',#24554,#24555); +#24554 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#24555 = VECTOR('',#24556,1.); +#24556 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24557 = ORIENTED_EDGE('',*,*,#24558,.T.); +#24558 = EDGE_CURVE('',#24551,#24559,#24561,.T.); +#24559 = VERTEX_POINT('',#24560); +#24560 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#24561 = LINE('',#24562,#24563); +#24562 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#24563 = VECTOR('',#24564,1.); +#24564 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#24565 = ORIENTED_EDGE('',*,*,#24566,.T.); +#24566 = EDGE_CURVE('',#24559,#24567,#24569,.T.); +#24567 = VERTEX_POINT('',#24568); +#24568 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#24569 = LINE('',#24570,#24571); +#24570 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#24571 = VECTOR('',#24572,1.); +#24572 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#24573 = ORIENTED_EDGE('',*,*,#24574,.T.); +#24574 = EDGE_CURVE('',#24567,#24575,#24577,.T.); +#24575 = VERTEX_POINT('',#24576); +#24576 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#24577 = LINE('',#24578,#24579); +#24578 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#24579 = VECTOR('',#24580,1.); +#24580 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#24581 = ORIENTED_EDGE('',*,*,#24582,.T.); +#24582 = EDGE_CURVE('',#24575,#24583,#24585,.T.); +#24583 = VERTEX_POINT('',#24584); +#24584 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#24585 = LINE('',#24586,#24587); +#24586 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#24587 = VECTOR('',#24588,1.); +#24588 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24589 = ORIENTED_EDGE('',*,*,#24590,.T.); +#24590 = EDGE_CURVE('',#24583,#24504,#24591,.T.); +#24591 = LINE('',#24592,#24593); +#24592 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#24593 = VECTOR('',#24594,1.); +#24594 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#24595 = PLANE('',#24596); +#24596 = AXIS2_PLACEMENT_3D('',#24597,#24598,#24599); +#24597 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#24598 = DIRECTION('',(0.,0.,-1.)); +#24599 = DIRECTION('',(0.370454302632,-0.928850692879,0.)); +#24600 = ADVANCED_FACE('',(#24601),#24618,.F.); +#24601 = FACE_BOUND('',#24602,.F.); +#24602 = EDGE_LOOP('',(#24603,#24604,#24611,#24617)); +#24603 = ORIENTED_EDGE('',*,*,#24542,.T.); +#24604 = ORIENTED_EDGE('',*,*,#24605,.T.); +#24605 = EDGE_CURVE('',#24543,#24606,#24608,.T.); +#24606 = VERTEX_POINT('',#24607); +#24607 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#24608 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24609,#24610),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24609 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#24610 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#24611 = ORIENTED_EDGE('',*,*,#24612,.F.); +#24612 = EDGE_CURVE('',#24514,#24606,#24613,.T.); +#24613 = LINE('',#24614,#24615); +#24614 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#24615 = VECTOR('',#24616,1.); +#24616 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#24617 = ORIENTED_EDGE('',*,*,#24513,.F.); +#24618 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24619,#24620) + ,(#24621,#24622 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24619 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#24620 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#24621 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#24622 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#24623 = ADVANCED_FACE('',(#24624),#24647,.F.); +#24624 = FACE_BOUND('',#24625,.F.); +#24625 = EDGE_LOOP('',(#24626,#24627,#24634,#24642)); +#24626 = ORIENTED_EDGE('',*,*,#24520,.T.); +#24627 = ORIENTED_EDGE('',*,*,#24628,.T.); +#24628 = EDGE_CURVE('',#24514,#24629,#24631,.T.); +#24629 = VERTEX_POINT('',#24630); +#24630 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#24631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24632,#24633),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24632 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#24633 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#24634 = ORIENTED_EDGE('',*,*,#24635,.F.); +#24635 = EDGE_CURVE('',#24636,#24629,#24638,.T.); +#24636 = VERTEX_POINT('',#24637); +#24637 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#24638 = LINE('',#24639,#24640); +#24639 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#24640 = VECTOR('',#24641,1.); +#24641 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#24642 = ORIENTED_EDGE('',*,*,#24643,.F.); +#24643 = EDGE_CURVE('',#24521,#24636,#24644,.T.); +#24644 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24645,#24646),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24645 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#24646 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#24647 = PLANE('',#24648); +#24648 = AXIS2_PLACEMENT_3D('',#24649,#24650,#24651); +#24649 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#24650 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24651 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#24652 = ADVANCED_FACE('',(#24653),#24670,.F.); +#24653 = FACE_BOUND('',#24654,.F.); +#24654 = EDGE_LOOP('',(#24655,#24656,#24657,#24665)); +#24655 = ORIENTED_EDGE('',*,*,#24590,.T.); +#24656 = ORIENTED_EDGE('',*,*,#24528,.T.); +#24657 = ORIENTED_EDGE('',*,*,#24658,.F.); +#24658 = EDGE_CURVE('',#24659,#24521,#24661,.T.); +#24659 = VERTEX_POINT('',#24660); +#24660 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#24661 = LINE('',#24662,#24663); +#24662 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#24663 = VECTOR('',#24664,1.); +#24664 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#24665 = ORIENTED_EDGE('',*,*,#24666,.F.); +#24666 = EDGE_CURVE('',#24583,#24659,#24667,.T.); +#24667 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24668,#24669),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24668 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#24669 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#24670 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24671,#24672) + ,(#24673,#24674 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24671 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#24672 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#24673 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#24674 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#24675 = ADVANCED_FACE('',(#24676),#24725,.F.); +#24676 = FACE_BOUND('',#24677,.F.); +#24677 = EDGE_LOOP('',(#24678,#24679,#24680,#24688,#24696,#24704,#24712, + #24720)); +#24678 = ORIENTED_EDGE('',*,*,#24582,.T.); +#24679 = ORIENTED_EDGE('',*,*,#24666,.T.); +#24680 = ORIENTED_EDGE('',*,*,#24681,.F.); +#24681 = EDGE_CURVE('',#24682,#24659,#24684,.T.); +#24682 = VERTEX_POINT('',#24683); +#24683 = CARTESIAN_POINT('',(-0.7,1.15,0.575)); +#24684 = LINE('',#24685,#24686); +#24685 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#24686 = VECTOR('',#24687,1.); +#24687 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24688 = ORIENTED_EDGE('',*,*,#24689,.F.); +#24689 = EDGE_CURVE('',#24690,#24682,#24692,.T.); +#24690 = VERTEX_POINT('',#24691); +#24691 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#24692 = LINE('',#24693,#24694); +#24693 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#24694 = VECTOR('',#24695,1.); +#24695 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24696 = ORIENTED_EDGE('',*,*,#24697,.F.); +#24697 = EDGE_CURVE('',#24698,#24690,#24700,.T.); +#24698 = VERTEX_POINT('',#24699); +#24699 = CARTESIAN_POINT('',(-0.7,-0.75,0.575)); +#24700 = LINE('',#24701,#24702); +#24701 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#24702 = VECTOR('',#24703,1.); +#24703 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24704 = ORIENTED_EDGE('',*,*,#24705,.F.); +#24705 = EDGE_CURVE('',#24706,#24698,#24708,.T.); +#24706 = VERTEX_POINT('',#24707); +#24707 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#24708 = LINE('',#24709,#24710); +#24709 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#24710 = VECTOR('',#24711,1.); +#24711 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#24712 = ORIENTED_EDGE('',*,*,#24713,.F.); +#24713 = EDGE_CURVE('',#24714,#24706,#24716,.T.); +#24714 = VERTEX_POINT('',#24715); +#24715 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#24716 = LINE('',#24717,#24718); +#24717 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#24718 = VECTOR('',#24719,1.); +#24719 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24720 = ORIENTED_EDGE('',*,*,#24721,.F.); +#24721 = EDGE_CURVE('',#24575,#24714,#24722,.T.); +#24722 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24723,#24724),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24723 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#24724 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#24725 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24726,#24727) + ,(#24728,#24729 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24726 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#24727 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#24728 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#24729 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#24730 = ADVANCED_FACE('',(#24731),#24764,.F.); +#24731 = FACE_BOUND('',#24732,.F.); +#24732 = EDGE_LOOP('',(#24733,#24734,#24741,#24749,#24757,#24763)); +#24733 = ORIENTED_EDGE('',*,*,#24550,.T.); +#24734 = ORIENTED_EDGE('',*,*,#24735,.T.); +#24735 = EDGE_CURVE('',#24551,#24736,#24738,.T.); +#24736 = VERTEX_POINT('',#24737); +#24737 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#24738 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24739,#24740),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24739 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#24740 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#24741 = ORIENTED_EDGE('',*,*,#24742,.F.); +#24742 = EDGE_CURVE('',#24743,#24736,#24745,.T.); +#24743 = VERTEX_POINT('',#24744); +#24744 = CARTESIAN_POINT('',(0.7,-0.2,0.575)); +#24745 = LINE('',#24746,#24747); +#24746 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#24747 = VECTOR('',#24748,1.); +#24748 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24749 = ORIENTED_EDGE('',*,*,#24750,.F.); +#24750 = EDGE_CURVE('',#24751,#24743,#24753,.T.); +#24751 = VERTEX_POINT('',#24752); +#24752 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#24753 = LINE('',#24754,#24755); +#24754 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#24755 = VECTOR('',#24756,1.); +#24756 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24757 = ORIENTED_EDGE('',*,*,#24758,.F.); +#24758 = EDGE_CURVE('',#24606,#24751,#24759,.T.); +#24759 = LINE('',#24760,#24761); +#24760 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#24761 = VECTOR('',#24762,1.); +#24762 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24763 = ORIENTED_EDGE('',*,*,#24605,.F.); +#24764 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24765,#24766) + ,(#24767,#24768 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24765 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#24766 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#24767 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#24768 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#24769 = ADVANCED_FACE('',(#24770),#24787,.F.); +#24770 = FACE_BOUND('',#24771,.F.); +#24771 = EDGE_LOOP('',(#24772,#24773,#24774,#24782)); +#24772 = ORIENTED_EDGE('',*,*,#24574,.T.); +#24773 = ORIENTED_EDGE('',*,*,#24721,.T.); +#24774 = ORIENTED_EDGE('',*,*,#24775,.F.); +#24775 = EDGE_CURVE('',#24776,#24714,#24778,.T.); +#24776 = VERTEX_POINT('',#24777); +#24777 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#24778 = LINE('',#24779,#24780); +#24779 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#24780 = VECTOR('',#24781,1.); +#24781 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#24782 = ORIENTED_EDGE('',*,*,#24783,.F.); +#24783 = EDGE_CURVE('',#24567,#24776,#24784,.T.); +#24784 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24785,#24786),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24785 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#24786 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#24787 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24788,#24789) + ,(#24790,#24791 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24788 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#24789 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#24790 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#24791 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#24792 = ADVANCED_FACE('',(#24793),#24810,.F.); +#24793 = FACE_BOUND('',#24794,.F.); +#24794 = EDGE_LOOP('',(#24795,#24796,#24803,#24809)); +#24795 = ORIENTED_EDGE('',*,*,#24558,.T.); +#24796 = ORIENTED_EDGE('',*,*,#24797,.T.); +#24797 = EDGE_CURVE('',#24559,#24798,#24800,.T.); +#24798 = VERTEX_POINT('',#24799); +#24799 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#24800 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24801,#24802),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24801 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#24802 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#24803 = ORIENTED_EDGE('',*,*,#24804,.F.); +#24804 = EDGE_CURVE('',#24736,#24798,#24805,.T.); +#24805 = LINE('',#24806,#24807); +#24806 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#24807 = VECTOR('',#24808,1.); +#24808 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#24809 = ORIENTED_EDGE('',*,*,#24735,.F.); +#24810 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24811,#24812) + ,(#24813,#24814 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24811 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#24812 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#24813 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#24814 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#24815 = ADVANCED_FACE('',(#24816),#24827,.F.); +#24816 = FACE_BOUND('',#24817,.F.); +#24817 = EDGE_LOOP('',(#24818,#24819,#24820,#24826)); +#24818 = ORIENTED_EDGE('',*,*,#24566,.T.); +#24819 = ORIENTED_EDGE('',*,*,#24783,.T.); +#24820 = ORIENTED_EDGE('',*,*,#24821,.F.); +#24821 = EDGE_CURVE('',#24798,#24776,#24822,.T.); +#24822 = LINE('',#24823,#24824); +#24823 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#24824 = VECTOR('',#24825,1.); +#24825 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#24826 = ORIENTED_EDGE('',*,*,#24797,.F.); +#24827 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24828,#24829) + ,(#24830,#24831 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24828 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#24829 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#24830 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#24831 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#24832 = ADVANCED_FACE('',(#24833),#24850,.F.); +#24833 = FACE_BOUND('',#24834,.F.); +#24834 = EDGE_LOOP('',(#24835,#24836,#24843,#24849)); +#24835 = ORIENTED_EDGE('',*,*,#24612,.T.); +#24836 = ORIENTED_EDGE('',*,*,#24837,.T.); +#24837 = EDGE_CURVE('',#24606,#24838,#24840,.T.); +#24838 = VERTEX_POINT('',#24839); +#24839 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#24840 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24841,#24842),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24841 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#24842 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#24843 = ORIENTED_EDGE('',*,*,#24844,.F.); +#24844 = EDGE_CURVE('',#24629,#24838,#24845,.T.); +#24845 = LINE('',#24846,#24847); +#24846 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#24847 = VECTOR('',#24848,1.); +#24848 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#24849 = ORIENTED_EDGE('',*,*,#24628,.F.); +#24850 = PLANE('',#24851); +#24851 = AXIS2_PLACEMENT_3D('',#24852,#24853,#24854); +#24852 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#24853 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#24854 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#24855 = ADVANCED_FACE('',(#24856),#24938,.F.); +#24856 = FACE_BOUND('',#24857,.F.); +#24857 = EDGE_LOOP('',(#24858,#24866,#24867,#24868,#24876,#24884,#24892, + #24900,#24908,#24916,#24924,#24932)); +#24858 = ORIENTED_EDGE('',*,*,#24859,.T.); +#24859 = EDGE_CURVE('',#24860,#24636,#24862,.T.); +#24860 = VERTEX_POINT('',#24861); +#24861 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#24862 = LINE('',#24863,#24864); +#24863 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#24864 = VECTOR('',#24865,1.); +#24865 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#24866 = ORIENTED_EDGE('',*,*,#24635,.T.); +#24867 = ORIENTED_EDGE('',*,*,#24844,.T.); +#24868 = ORIENTED_EDGE('',*,*,#24869,.T.); +#24869 = EDGE_CURVE('',#24838,#24870,#24872,.T.); +#24870 = VERTEX_POINT('',#24871); +#24871 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#24872 = LINE('',#24873,#24874); +#24873 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#24874 = VECTOR('',#24875,1.); +#24875 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24876 = ORIENTED_EDGE('',*,*,#24877,.T.); +#24877 = EDGE_CURVE('',#24870,#24878,#24880,.T.); +#24878 = VERTEX_POINT('',#24879); +#24879 = CARTESIAN_POINT('',(0.675,0.2,0.725)); +#24880 = LINE('',#24881,#24882); +#24881 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#24882 = VECTOR('',#24883,1.); +#24883 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#24884 = ORIENTED_EDGE('',*,*,#24885,.F.); +#24885 = EDGE_CURVE('',#24886,#24878,#24888,.T.); +#24886 = VERTEX_POINT('',#24887); +#24887 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#24888 = LINE('',#24889,#24890); +#24889 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#24890 = VECTOR('',#24891,1.); +#24891 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#24892 = ORIENTED_EDGE('',*,*,#24893,.F.); +#24893 = EDGE_CURVE('',#24894,#24886,#24896,.T.); +#24894 = VERTEX_POINT('',#24895); +#24895 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#24896 = LINE('',#24897,#24898); +#24897 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#24898 = VECTOR('',#24899,1.); +#24899 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#24900 = ORIENTED_EDGE('',*,*,#24901,.F.); +#24901 = EDGE_CURVE('',#24902,#24894,#24904,.T.); +#24902 = VERTEX_POINT('',#24903); +#24903 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#24904 = LINE('',#24905,#24906); +#24905 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#24906 = VECTOR('',#24907,1.); +#24907 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#24908 = ORIENTED_EDGE('',*,*,#24909,.F.); +#24909 = EDGE_CURVE('',#24910,#24902,#24912,.T.); +#24910 = VERTEX_POINT('',#24911); +#24911 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#24912 = LINE('',#24913,#24914); +#24913 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#24914 = VECTOR('',#24915,1.); +#24915 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#24916 = ORIENTED_EDGE('',*,*,#24917,.F.); +#24917 = EDGE_CURVE('',#24918,#24910,#24920,.T.); +#24918 = VERTEX_POINT('',#24919); +#24919 = CARTESIAN_POINT('',(-0.675,1.15,0.725)); +#24920 = LINE('',#24921,#24922); +#24921 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#24922 = VECTOR('',#24923,1.); +#24923 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24924 = ORIENTED_EDGE('',*,*,#24925,.F.); +#24925 = EDGE_CURVE('',#24926,#24918,#24928,.T.); +#24926 = VERTEX_POINT('',#24927); +#24927 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#24928 = LINE('',#24929,#24930); +#24929 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#24930 = VECTOR('',#24931,1.); +#24931 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#24932 = ORIENTED_EDGE('',*,*,#24933,.T.); +#24933 = EDGE_CURVE('',#24926,#24860,#24934,.T.); +#24934 = LINE('',#24935,#24936); +#24935 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#24936 = VECTOR('',#24937,1.); +#24937 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24938 = PLANE('',#24939); +#24939 = AXIS2_PLACEMENT_3D('',#24940,#24941,#24942); +#24940 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#24941 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#24942 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#24943 = ADVANCED_FACE('',(#24944),#24954,.F.); +#24944 = FACE_BOUND('',#24945,.F.); +#24945 = EDGE_LOOP('',(#24946,#24947,#24948,#24949)); +#24946 = ORIENTED_EDGE('',*,*,#24658,.T.); +#24947 = ORIENTED_EDGE('',*,*,#24643,.T.); +#24948 = ORIENTED_EDGE('',*,*,#24859,.F.); +#24949 = ORIENTED_EDGE('',*,*,#24950,.F.); +#24950 = EDGE_CURVE('',#24659,#24860,#24951,.T.); +#24951 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24952,#24953),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24952 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#24953 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#24954 = PLANE('',#24955); +#24955 = AXIS2_PLACEMENT_3D('',#24956,#24957,#24958); +#24956 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#24957 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#24958 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#24959 = ADVANCED_FACE('',(#24960),#24984,.F.); +#24960 = FACE_BOUND('',#24961,.F.); +#24961 = EDGE_LOOP('',(#24962,#24969,#24970,#24978)); +#24962 = ORIENTED_EDGE('',*,*,#24963,.F.); +#24963 = EDGE_CURVE('',#24714,#24964,#24966,.T.); +#24964 = VERTEX_POINT('',#24965); +#24965 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#24966 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24967,#24968),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24967 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#24968 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#24969 = ORIENTED_EDGE('',*,*,#24713,.T.); +#24970 = ORIENTED_EDGE('',*,*,#24971,.T.); +#24971 = EDGE_CURVE('',#24706,#24972,#24974,.T.); +#24972 = VERTEX_POINT('',#24973); +#24973 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#24974 = LINE('',#24975,#24976); +#24975 = CARTESIAN_POINT('',(-0.7,-1.15,0.529763586955)); +#24976 = VECTOR('',#24977,1.); +#24977 = DIRECTION('',(0.,0.,1.)); +#24978 = ORIENTED_EDGE('',*,*,#24979,.F.); +#24979 = EDGE_CURVE('',#24964,#24972,#24980,.T.); +#24980 = LINE('',#24981,#24982); +#24981 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#24982 = VECTOR('',#24983,1.); +#24983 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24984 = PLANE('',#24985); +#24985 = AXIS2_PLACEMENT_3D('',#24986,#24987,#24988); +#24986 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#24987 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#24988 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#24989 = ADVANCED_FACE('',(#24990),#25017,.F.); +#24990 = FACE_BOUND('',#24991,.F.); +#24991 = EDGE_LOOP('',(#24992,#24993,#25002,#25010)); +#24992 = ORIENTED_EDGE('',*,*,#24705,.T.); +#24993 = ORIENTED_EDGE('',*,*,#24994,.T.); +#24994 = EDGE_CURVE('',#24698,#24995,#24997,.T.); +#24995 = VERTEX_POINT('',#24996); +#24996 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#24997 = CIRCLE('',#24998,0.1); +#24998 = AXIS2_PLACEMENT_3D('',#24999,#25000,#25001); +#24999 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#25000 = DIRECTION('',(-1.144237745222E-17,-1.,-5.473822126269E-48)); +#25001 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#25002 = ORIENTED_EDGE('',*,*,#25003,.F.); +#25003 = EDGE_CURVE('',#25004,#24995,#25006,.T.); +#25004 = VERTEX_POINT('',#25005); +#25005 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#25006 = LINE('',#25007,#25008); +#25007 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#25008 = VECTOR('',#25009,1.); +#25009 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25010 = ORIENTED_EDGE('',*,*,#25011,.F.); +#25011 = EDGE_CURVE('',#24706,#25004,#25012,.T.); +#25012 = CIRCLE('',#25013,0.1); +#25013 = AXIS2_PLACEMENT_3D('',#25014,#25015,#25016); +#25014 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#25015 = DIRECTION('',(-1.144237745222E-17,-1.,-5.473822126269E-48)); +#25016 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#25017 = CYLINDRICAL_SURFACE('',#25018,0.1); +#25018 = AXIS2_PLACEMENT_3D('',#25019,#25020,#25021); +#25019 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#25020 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#25021 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#25022 = ADVANCED_FACE('',(#25023),#25048,.F.); +#25023 = FACE_BOUND('',#25024,.F.); +#25024 = EDGE_LOOP('',(#25025,#25033,#25034,#25042)); +#25025 = ORIENTED_EDGE('',*,*,#25026,.F.); +#25026 = EDGE_CURVE('',#24698,#25027,#25029,.T.); +#25027 = VERTEX_POINT('',#25028); +#25028 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#25029 = LINE('',#25030,#25031); +#25030 = CARTESIAN_POINT('',(-0.7,-0.75,0.529763586955)); +#25031 = VECTOR('',#25032,1.); +#25032 = DIRECTION('',(0.,0.,1.)); +#25033 = ORIENTED_EDGE('',*,*,#24697,.T.); +#25034 = ORIENTED_EDGE('',*,*,#25035,.T.); +#25035 = EDGE_CURVE('',#24690,#25036,#25038,.T.); +#25036 = VERTEX_POINT('',#25037); +#25037 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#25038 = LINE('',#25039,#25040); +#25039 = CARTESIAN_POINT('',(-0.7,0.75,0.529763586955)); +#25040 = VECTOR('',#25041,1.); +#25041 = DIRECTION('',(0.,0.,1.)); +#25042 = ORIENTED_EDGE('',*,*,#25043,.F.); +#25043 = EDGE_CURVE('',#25027,#25036,#25044,.T.); +#25044 = LINE('',#25045,#25046); +#25045 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#25046 = VECTOR('',#25047,1.); +#25047 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25048 = PLANE('',#25049); +#25049 = AXIS2_PLACEMENT_3D('',#25050,#25051,#25052); +#25050 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#25051 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#25052 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25053 = ADVANCED_FACE('',(#25054),#25081,.F.); +#25054 = FACE_BOUND('',#25055,.F.); +#25055 = EDGE_LOOP('',(#25056,#25057,#25066,#25074)); +#25056 = ORIENTED_EDGE('',*,*,#24689,.T.); +#25057 = ORIENTED_EDGE('',*,*,#25058,.T.); +#25058 = EDGE_CURVE('',#24682,#25059,#25061,.T.); +#25059 = VERTEX_POINT('',#25060); +#25060 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#25061 = CIRCLE('',#25062,0.1); +#25062 = AXIS2_PLACEMENT_3D('',#25063,#25064,#25065); +#25063 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#25064 = DIRECTION('',(-1.144237745222E-17,-1.,-5.473822126269E-48)); +#25065 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#25066 = ORIENTED_EDGE('',*,*,#25067,.F.); +#25067 = EDGE_CURVE('',#25068,#25059,#25070,.T.); +#25068 = VERTEX_POINT('',#25069); +#25069 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#25070 = LINE('',#25071,#25072); +#25071 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#25072 = VECTOR('',#25073,1.); +#25073 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25074 = ORIENTED_EDGE('',*,*,#25075,.F.); +#25075 = EDGE_CURVE('',#24690,#25068,#25076,.T.); +#25076 = CIRCLE('',#25077,0.1); +#25077 = AXIS2_PLACEMENT_3D('',#25078,#25079,#25080); +#25078 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#25079 = DIRECTION('',(-1.144237745222E-17,-1.,-5.473822126269E-48)); +#25080 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#25081 = CYLINDRICAL_SURFACE('',#25082,0.1); +#25082 = AXIS2_PLACEMENT_3D('',#25083,#25084,#25085); +#25083 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#25084 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#25085 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#25086 = ADVANCED_FACE('',(#25087),#25098,.F.); +#25087 = FACE_BOUND('',#25088,.F.); +#25088 = EDGE_LOOP('',(#25089,#25095,#25096,#25097)); +#25089 = ORIENTED_EDGE('',*,*,#25090,.F.); +#25090 = EDGE_CURVE('',#24682,#24926,#25091,.T.); +#25091 = LINE('',#25092,#25093); +#25092 = CARTESIAN_POINT('',(-0.7,1.15,0.529763586955)); +#25093 = VECTOR('',#25094,1.); +#25094 = DIRECTION('',(0.,0.,1.)); +#25095 = ORIENTED_EDGE('',*,*,#24681,.T.); +#25096 = ORIENTED_EDGE('',*,*,#24950,.T.); +#25097 = ORIENTED_EDGE('',*,*,#24933,.F.); +#25098 = PLANE('',#25099); +#25099 = AXIS2_PLACEMENT_3D('',#25100,#25101,#25102); +#25100 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#25101 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#25102 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25103 = ADVANCED_FACE('',(#25104),#25115,.F.); +#25104 = FACE_BOUND('',#25105,.F.); +#25105 = EDGE_LOOP('',(#25106,#25107,#25108,#25114)); +#25106 = ORIENTED_EDGE('',*,*,#24837,.F.); +#25107 = ORIENTED_EDGE('',*,*,#24758,.T.); +#25108 = ORIENTED_EDGE('',*,*,#25109,.T.); +#25109 = EDGE_CURVE('',#24751,#24870,#25110,.T.); +#25110 = LINE('',#25111,#25112); +#25111 = CARTESIAN_POINT('',(0.7,0.2,0.529763586955)); +#25112 = VECTOR('',#25113,1.); +#25113 = DIRECTION('',(0.,0.,1.)); +#25114 = ORIENTED_EDGE('',*,*,#24869,.F.); +#25115 = PLANE('',#25116); +#25116 = AXIS2_PLACEMENT_3D('',#25117,#25118,#25119); +#25117 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#25118 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#25119 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25120 = ADVANCED_FACE('',(#25121),#25148,.F.); +#25121 = FACE_BOUND('',#25122,.F.); +#25122 = EDGE_LOOP('',(#25123,#25124,#25133,#25141)); +#25123 = ORIENTED_EDGE('',*,*,#24750,.T.); +#25124 = ORIENTED_EDGE('',*,*,#25125,.T.); +#25125 = EDGE_CURVE('',#24743,#25126,#25128,.T.); +#25126 = VERTEX_POINT('',#25127); +#25127 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#25128 = CIRCLE('',#25129,0.1); +#25129 = AXIS2_PLACEMENT_3D('',#25130,#25131,#25132); +#25130 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#25131 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25132 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#25133 = ORIENTED_EDGE('',*,*,#25134,.F.); +#25134 = EDGE_CURVE('',#25135,#25126,#25137,.T.); +#25135 = VERTEX_POINT('',#25136); +#25136 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#25137 = LINE('',#25138,#25139); +#25138 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#25139 = VECTOR('',#25140,1.); +#25140 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25141 = ORIENTED_EDGE('',*,*,#25142,.F.); +#25142 = EDGE_CURVE('',#24751,#25135,#25143,.T.); +#25143 = CIRCLE('',#25144,0.1); +#25144 = AXIS2_PLACEMENT_3D('',#25145,#25146,#25147); +#25145 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#25146 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25147 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#25148 = CYLINDRICAL_SURFACE('',#25149,0.1); +#25149 = AXIS2_PLACEMENT_3D('',#25150,#25151,#25152); +#25150 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#25151 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25152 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#25153 = ADVANCED_FACE('',(#25154),#25178,.F.); +#25154 = FACE_BOUND('',#25155,.F.); +#25155 = EDGE_LOOP('',(#25156,#25164,#25165,#25172)); +#25156 = ORIENTED_EDGE('',*,*,#25157,.F.); +#25157 = EDGE_CURVE('',#24743,#25158,#25160,.T.); +#25158 = VERTEX_POINT('',#25159); +#25159 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#25160 = LINE('',#25161,#25162); +#25161 = CARTESIAN_POINT('',(0.7,-0.2,0.529763586955)); +#25162 = VECTOR('',#25163,1.); +#25163 = DIRECTION('',(0.,0.,1.)); +#25164 = ORIENTED_EDGE('',*,*,#24742,.T.); +#25165 = ORIENTED_EDGE('',*,*,#25166,.T.); +#25166 = EDGE_CURVE('',#24736,#25167,#25169,.T.); +#25167 = VERTEX_POINT('',#25168); +#25168 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#25169 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25170,#25171),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25170 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#25171 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#25172 = ORIENTED_EDGE('',*,*,#25173,.F.); +#25173 = EDGE_CURVE('',#25158,#25167,#25174,.T.); +#25174 = LINE('',#25175,#25176); +#25175 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#25176 = VECTOR('',#25177,1.); +#25177 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25178 = PLANE('',#25179); +#25179 = AXIS2_PLACEMENT_3D('',#25180,#25181,#25182); +#25180 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#25181 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#25182 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25183 = ADVANCED_FACE('',(#25184),#25201,.F.); +#25184 = FACE_BOUND('',#25185,.F.); +#25185 = EDGE_LOOP('',(#25186,#25187,#25188,#25196)); +#25186 = ORIENTED_EDGE('',*,*,#24775,.T.); +#25187 = ORIENTED_EDGE('',*,*,#24963,.T.); +#25188 = ORIENTED_EDGE('',*,*,#25189,.F.); +#25189 = EDGE_CURVE('',#25190,#24964,#25192,.T.); +#25190 = VERTEX_POINT('',#25191); +#25191 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#25192 = LINE('',#25193,#25194); +#25193 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#25194 = VECTOR('',#25195,1.); +#25195 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#25196 = ORIENTED_EDGE('',*,*,#25197,.F.); +#25197 = EDGE_CURVE('',#24776,#25190,#25198,.T.); +#25198 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25199,#25200),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25199 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#25200 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#25201 = PLANE('',#25202); +#25202 = AXIS2_PLACEMENT_3D('',#25203,#25204,#25205); +#25203 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#25204 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#25205 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#25206 = ADVANCED_FACE('',(#25207),#25224,.F.); +#25207 = FACE_BOUND('',#25208,.F.); +#25208 = EDGE_LOOP('',(#25209,#25210,#25217,#25223)); +#25209 = ORIENTED_EDGE('',*,*,#24804,.T.); +#25210 = ORIENTED_EDGE('',*,*,#25211,.T.); +#25211 = EDGE_CURVE('',#24798,#25212,#25214,.T.); +#25212 = VERTEX_POINT('',#25213); +#25213 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#25214 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25215,#25216),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25215 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#25216 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#25217 = ORIENTED_EDGE('',*,*,#25218,.F.); +#25218 = EDGE_CURVE('',#25167,#25212,#25219,.T.); +#25219 = LINE('',#25220,#25221); +#25220 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#25221 = VECTOR('',#25222,1.); +#25222 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#25223 = ORIENTED_EDGE('',*,*,#25166,.F.); +#25224 = PLANE('',#25225); +#25225 = AXIS2_PLACEMENT_3D('',#25226,#25227,#25228); +#25226 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#25227 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#25228 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#25229 = ADVANCED_FACE('',(#25230),#25241,.F.); +#25230 = FACE_BOUND('',#25231,.F.); +#25231 = EDGE_LOOP('',(#25232,#25233,#25234,#25240)); +#25232 = ORIENTED_EDGE('',*,*,#24821,.T.); +#25233 = ORIENTED_EDGE('',*,*,#25197,.T.); +#25234 = ORIENTED_EDGE('',*,*,#25235,.F.); +#25235 = EDGE_CURVE('',#25212,#25190,#25236,.T.); +#25236 = LINE('',#25237,#25238); +#25237 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#25238 = VECTOR('',#25239,1.); +#25239 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#25240 = ORIENTED_EDGE('',*,*,#25211,.F.); +#25241 = PLANE('',#25242); +#25242 = AXIS2_PLACEMENT_3D('',#25243,#25244,#25245); +#25243 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#25244 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25245 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#25246 = ADVANCED_FACE('',(#25247),#25270,.F.); +#25247 = FACE_BOUND('',#25248,.F.); +#25248 = EDGE_LOOP('',(#25249,#25257,#25263,#25264)); +#25249 = ORIENTED_EDGE('',*,*,#25250,.F.); +#25250 = EDGE_CURVE('',#25036,#25251,#25253,.T.); +#25251 = VERTEX_POINT('',#25252); +#25252 = CARTESIAN_POINT('',(-0.675,0.75,0.725)); +#25253 = LINE('',#25254,#25255); +#25254 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#25255 = VECTOR('',#25256,1.); +#25256 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#25257 = ORIENTED_EDGE('',*,*,#25258,.T.); +#25258 = EDGE_CURVE('',#25036,#24926,#25259,.T.); +#25259 = LINE('',#25260,#25261); +#25260 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#25261 = VECTOR('',#25262,1.); +#25262 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25263 = ORIENTED_EDGE('',*,*,#24925,.T.); +#25264 = ORIENTED_EDGE('',*,*,#25265,.F.); +#25265 = EDGE_CURVE('',#25251,#24918,#25266,.T.); +#25266 = LINE('',#25267,#25268); +#25267 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#25268 = VECTOR('',#25269,1.); +#25269 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25270 = PLANE('',#25271); +#25271 = AXIS2_PLACEMENT_3D('',#25272,#25273,#25274); +#25272 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#25273 = DIRECTION('',(0.,0.,-1.)); +#25274 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#25275 = ADVANCED_FACE('',(#25276),#25324,.F.); +#25276 = FACE_BOUND('',#25277,.F.); +#25277 = EDGE_LOOP('',(#25278,#25288,#25296,#25302,#25303,#25304,#25311, + #25319)); +#25278 = ORIENTED_EDGE('',*,*,#25279,.T.); +#25279 = EDGE_CURVE('',#25280,#25282,#25284,.T.); +#25280 = VERTEX_POINT('',#25281); +#25281 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#25282 = VERTEX_POINT('',#25283); +#25283 = CARTESIAN_POINT('',(-0.675,-1.15,0.725)); +#25284 = LINE('',#25285,#25286); +#25285 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#25286 = VECTOR('',#25287,1.); +#25287 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25288 = ORIENTED_EDGE('',*,*,#25289,.T.); +#25289 = EDGE_CURVE('',#25282,#25290,#25292,.T.); +#25290 = VERTEX_POINT('',#25291); +#25291 = CARTESIAN_POINT('',(-0.675,-0.75,0.725)); +#25292 = LINE('',#25293,#25294); +#25293 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#25294 = VECTOR('',#25295,1.); +#25295 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25296 = ORIENTED_EDGE('',*,*,#25297,.T.); +#25297 = EDGE_CURVE('',#25290,#25251,#25298,.T.); +#25298 = LINE('',#25299,#25300); +#25299 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#25300 = VECTOR('',#25301,1.); +#25301 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25302 = ORIENTED_EDGE('',*,*,#25265,.T.); +#25303 = ORIENTED_EDGE('',*,*,#24917,.T.); +#25304 = ORIENTED_EDGE('',*,*,#25305,.T.); +#25305 = EDGE_CURVE('',#24910,#25306,#25308,.T.); +#25306 = VERTEX_POINT('',#25307); +#25307 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#25308 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25309,#25310),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25309 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#25310 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#25311 = ORIENTED_EDGE('',*,*,#25312,.F.); +#25312 = EDGE_CURVE('',#25313,#25306,#25315,.T.); +#25313 = VERTEX_POINT('',#25314); +#25314 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#25315 = LINE('',#25316,#25317); +#25316 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#25317 = VECTOR('',#25318,1.); +#25318 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25319 = ORIENTED_EDGE('',*,*,#25320,.F.); +#25320 = EDGE_CURVE('',#25280,#25313,#25321,.T.); +#25321 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25322,#25323),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25322 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#25323 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#25324 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#25325,#25326) + ,(#25327,#25328 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25325 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#25326 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#25327 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#25328 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#25329 = ADVANCED_FACE('',(#25330),#25347,.F.); +#25330 = FACE_BOUND('',#25331,.F.); +#25331 = EDGE_LOOP('',(#25332,#25333,#25340,#25346)); +#25332 = ORIENTED_EDGE('',*,*,#24909,.T.); +#25333 = ORIENTED_EDGE('',*,*,#25334,.T.); +#25334 = EDGE_CURVE('',#24902,#25335,#25337,.T.); +#25335 = VERTEX_POINT('',#25336); +#25336 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#25337 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25338,#25339),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25338 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#25339 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#25340 = ORIENTED_EDGE('',*,*,#25341,.F.); +#25341 = EDGE_CURVE('',#25306,#25335,#25342,.T.); +#25342 = LINE('',#25343,#25344); +#25343 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#25344 = VECTOR('',#25345,1.); +#25345 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#25346 = ORIENTED_EDGE('',*,*,#25305,.F.); +#25347 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#25348,#25349) + ,(#25350,#25351 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#25348 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#25349 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#25350 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#25351 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#25352 = ADVANCED_FACE('',(#25353),#25370,.F.); +#25353 = FACE_BOUND('',#25354,.F.); +#25354 = EDGE_LOOP('',(#25355,#25356,#25363,#25369)); +#25355 = ORIENTED_EDGE('',*,*,#24901,.T.); +#25356 = ORIENTED_EDGE('',*,*,#25357,.T.); +#25357 = EDGE_CURVE('',#24894,#25358,#25360,.T.); +#25358 = VERTEX_POINT('',#25359); +#25359 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#25360 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25361,#25362),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25361 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#25362 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#25363 = ORIENTED_EDGE('',*,*,#25364,.F.); +#25364 = EDGE_CURVE('',#25335,#25358,#25365,.T.); +#25365 = LINE('',#25366,#25367); +#25366 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#25367 = VECTOR('',#25368,1.); +#25368 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#25369 = ORIENTED_EDGE('',*,*,#25334,.F.); +#25370 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#25371,#25372) + ,(#25373,#25374 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25371 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#25372 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#25373 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#25374 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#25375 = ADVANCED_FACE('',(#25376),#25393,.F.); +#25376 = FACE_BOUND('',#25377,.F.); +#25377 = EDGE_LOOP('',(#25378,#25379,#25386,#25392)); +#25378 = ORIENTED_EDGE('',*,*,#24893,.T.); +#25379 = ORIENTED_EDGE('',*,*,#25380,.T.); +#25380 = EDGE_CURVE('',#24886,#25381,#25383,.T.); +#25381 = VERTEX_POINT('',#25382); +#25382 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#25383 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25384,#25385),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25384 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#25385 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#25386 = ORIENTED_EDGE('',*,*,#25387,.F.); +#25387 = EDGE_CURVE('',#25358,#25381,#25388,.T.); +#25388 = LINE('',#25389,#25390); +#25389 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#25390 = VECTOR('',#25391,1.); +#25391 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#25392 = ORIENTED_EDGE('',*,*,#25357,.F.); +#25393 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#25394,#25395) + ,(#25396,#25397 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#25394 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#25395 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#25396 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#25397 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#25398 = ADVANCED_FACE('',(#25399),#25432,.F.); +#25399 = FACE_BOUND('',#25400,.F.); +#25400 = EDGE_LOOP('',(#25401,#25402,#25410,#25418,#25425,#25431)); +#25401 = ORIENTED_EDGE('',*,*,#24885,.T.); +#25402 = ORIENTED_EDGE('',*,*,#25403,.T.); +#25403 = EDGE_CURVE('',#24878,#25404,#25406,.T.); +#25404 = VERTEX_POINT('',#25405); +#25405 = CARTESIAN_POINT('',(0.675,-0.2,0.725)); +#25406 = LINE('',#25407,#25408); +#25407 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#25408 = VECTOR('',#25409,1.); +#25409 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25410 = ORIENTED_EDGE('',*,*,#25411,.T.); +#25411 = EDGE_CURVE('',#25404,#25412,#25414,.T.); +#25412 = VERTEX_POINT('',#25413); +#25413 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#25414 = LINE('',#25415,#25416); +#25415 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#25416 = VECTOR('',#25417,1.); +#25417 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25418 = ORIENTED_EDGE('',*,*,#25419,.T.); +#25419 = EDGE_CURVE('',#25412,#25420,#25422,.T.); +#25420 = VERTEX_POINT('',#25421); +#25421 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#25422 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25423,#25424),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25423 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#25424 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#25425 = ORIENTED_EDGE('',*,*,#25426,.F.); +#25426 = EDGE_CURVE('',#25381,#25420,#25427,.T.); +#25427 = LINE('',#25428,#25429); +#25428 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#25429 = VECTOR('',#25430,1.); +#25430 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25431 = ORIENTED_EDGE('',*,*,#25380,.F.); +#25432 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#25433,#25434) + ,(#25435,#25436 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25433 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#25434 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#25435 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#25436 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#25437 = ADVANCED_FACE('',(#25438),#25454,.F.); +#25438 = FACE_BOUND('',#25439,.F.); +#25439 = EDGE_LOOP('',(#25440,#25441,#25447,#25453)); +#25440 = ORIENTED_EDGE('',*,*,#24877,.F.); +#25441 = ORIENTED_EDGE('',*,*,#25442,.T.); +#25442 = EDGE_CURVE('',#24870,#25158,#25443,.T.); +#25443 = LINE('',#25444,#25445); +#25444 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#25445 = VECTOR('',#25446,1.); +#25446 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25447 = ORIENTED_EDGE('',*,*,#25448,.T.); +#25448 = EDGE_CURVE('',#25158,#25404,#25449,.T.); +#25449 = LINE('',#25450,#25451); +#25450 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#25451 = VECTOR('',#25452,1.); +#25452 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#25453 = ORIENTED_EDGE('',*,*,#25403,.F.); +#25454 = PLANE('',#25455); +#25455 = AXIS2_PLACEMENT_3D('',#25456,#25457,#25458); +#25456 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#25457 = DIRECTION('',(0.,0.,-1.)); +#25458 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#25459 = ADVANCED_FACE('',(#25460),#25498,.F.); +#25460 = FACE_BOUND('',#25461,.F.); +#25461 = EDGE_LOOP('',(#25462,#25463,#25464,#25465,#25466,#25467,#25468, + #25474,#25475,#25483,#25491,#25497)); +#25462 = ORIENTED_EDGE('',*,*,#25448,.F.); +#25463 = ORIENTED_EDGE('',*,*,#25173,.T.); +#25464 = ORIENTED_EDGE('',*,*,#25218,.T.); +#25465 = ORIENTED_EDGE('',*,*,#25235,.T.); +#25466 = ORIENTED_EDGE('',*,*,#25189,.T.); +#25467 = ORIENTED_EDGE('',*,*,#24979,.T.); +#25468 = ORIENTED_EDGE('',*,*,#25469,.T.); +#25469 = EDGE_CURVE('',#24972,#25282,#25470,.T.); +#25470 = LINE('',#25471,#25472); +#25471 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#25472 = VECTOR('',#25473,1.); +#25473 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#25474 = ORIENTED_EDGE('',*,*,#25279,.F.); +#25475 = ORIENTED_EDGE('',*,*,#25476,.F.); +#25476 = EDGE_CURVE('',#25477,#25280,#25479,.T.); +#25477 = VERTEX_POINT('',#25478); +#25478 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#25479 = LINE('',#25480,#25481); +#25480 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#25481 = VECTOR('',#25482,1.); +#25482 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#25483 = ORIENTED_EDGE('',*,*,#25484,.F.); +#25484 = EDGE_CURVE('',#25485,#25477,#25487,.T.); +#25485 = VERTEX_POINT('',#25486); +#25486 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#25487 = LINE('',#25488,#25489); +#25488 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#25489 = VECTOR('',#25490,1.); +#25490 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#25491 = ORIENTED_EDGE('',*,*,#25492,.F.); +#25492 = EDGE_CURVE('',#25412,#25485,#25493,.T.); +#25493 = LINE('',#25494,#25495); +#25494 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#25495 = VECTOR('',#25496,1.); +#25496 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#25497 = ORIENTED_EDGE('',*,*,#25411,.F.); +#25498 = PLANE('',#25499); +#25499 = AXIS2_PLACEMENT_3D('',#25500,#25501,#25502); +#25500 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#25501 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#25502 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#25503 = ADVANCED_FACE('',(#25504),#25573,.F.); +#25504 = FACE_BOUND('',#25505,.F.); +#25505 = EDGE_LOOP('',(#25506,#25507,#25508,#25516,#25525,#25533,#25541, + #25549,#25558,#25566)); +#25506 = ORIENTED_EDGE('',*,*,#24971,.F.); +#25507 = ORIENTED_EDGE('',*,*,#25011,.T.); +#25508 = ORIENTED_EDGE('',*,*,#25509,.T.); +#25509 = EDGE_CURVE('',#25004,#25510,#25512,.T.); +#25510 = VERTEX_POINT('',#25511); +#25511 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#25512 = LINE('',#25513,#25514); +#25513 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#25514 = VECTOR('',#25515,1.); +#25515 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#25516 = ORIENTED_EDGE('',*,*,#25517,.T.); +#25517 = EDGE_CURVE('',#25510,#25518,#25520,.T.); +#25518 = VERTEX_POINT('',#25519); +#25519 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#25520 = CIRCLE('',#25521,0.25); +#25521 = AXIS2_PLACEMENT_3D('',#25522,#25523,#25524); +#25522 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#25523 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34)); +#25524 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#25525 = ORIENTED_EDGE('',*,*,#25526,.T.); +#25526 = EDGE_CURVE('',#25518,#25527,#25529,.T.); +#25527 = VERTEX_POINT('',#25528); +#25528 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#25529 = LINE('',#25530,#25531); +#25530 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#25531 = VECTOR('',#25532,1.); +#25532 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#25533 = ORIENTED_EDGE('',*,*,#25534,.T.); +#25534 = EDGE_CURVE('',#25527,#25535,#25537,.T.); +#25535 = VERTEX_POINT('',#25536); +#25536 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#25537 = LINE('',#25538,#25539); +#25538 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#25539 = VECTOR('',#25540,1.); +#25540 = DIRECTION('',(0.,0.,1.)); +#25541 = ORIENTED_EDGE('',*,*,#25542,.T.); +#25542 = EDGE_CURVE('',#25535,#25543,#25545,.T.); +#25543 = VERTEX_POINT('',#25544); +#25544 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#25545 = LINE('',#25546,#25547); +#25546 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#25547 = VECTOR('',#25548,1.); +#25548 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#25549 = ORIENTED_EDGE('',*,*,#25550,.T.); +#25550 = EDGE_CURVE('',#25543,#25551,#25553,.T.); +#25551 = VERTEX_POINT('',#25552); +#25552 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#25553 = CIRCLE('',#25554,0.1); +#25554 = AXIS2_PLACEMENT_3D('',#25555,#25556,#25557); +#25555 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#25556 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47)); +#25557 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#25558 = ORIENTED_EDGE('',*,*,#25559,.T.); +#25559 = EDGE_CURVE('',#25551,#25560,#25562,.T.); +#25560 = VERTEX_POINT('',#25561); +#25561 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#25562 = LINE('',#25563,#25564); +#25563 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#25564 = VECTOR('',#25565,1.); +#25565 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#25566 = ORIENTED_EDGE('',*,*,#25567,.T.); +#25567 = EDGE_CURVE('',#25560,#24972,#25568,.T.); +#25568 = CIRCLE('',#25569,0.25); +#25569 = AXIS2_PLACEMENT_3D('',#25570,#25571,#25572); +#25570 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#25571 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25572 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#25573 = PLANE('',#25574); +#25574 = AXIS2_PLACEMENT_3D('',#25575,#25576,#25577); +#25575 = CARTESIAN_POINT('',(-0.931323080229,-1.15,0.33452717391)); +#25576 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25577 = DIRECTION('',(0.,-0.,1.)); +#25578 = ADVANCED_FACE('',(#25579),#25597,.F.); +#25579 = FACE_BOUND('',#25580,.F.); +#25580 = EDGE_LOOP('',(#25581,#25582,#25590,#25596)); +#25581 = ORIENTED_EDGE('',*,*,#25003,.T.); +#25582 = ORIENTED_EDGE('',*,*,#25583,.T.); +#25583 = EDGE_CURVE('',#24995,#25584,#25586,.T.); +#25584 = VERTEX_POINT('',#25585); +#25585 = CARTESIAN_POINT('',(-0.843471632406,-0.75,0.206587955583)); +#25586 = LINE('',#25587,#25588); +#25587 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#25588 = VECTOR('',#25589,1.); +#25589 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#25590 = ORIENTED_EDGE('',*,*,#25591,.F.); +#25591 = EDGE_CURVE('',#25510,#25584,#25592,.T.); +#25592 = LINE('',#25593,#25594); +#25593 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#25594 = VECTOR('',#25595,1.); +#25595 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25596 = ORIENTED_EDGE('',*,*,#25509,.F.); +#25597 = PLANE('',#25598); +#25598 = AXIS2_PLACEMENT_3D('',#25599,#25600,#25601); +#25599 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#25600 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909 + )); +#25601 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#25602 = ADVANCED_FACE('',(#25603),#25665,.T.); +#25603 = FACE_BOUND('',#25604,.T.); +#25604 = EDGE_LOOP('',(#25605,#25606,#25607,#25608,#25617,#25625,#25633, + #25641,#25650,#25658)); +#25605 = ORIENTED_EDGE('',*,*,#25026,.F.); +#25606 = ORIENTED_EDGE('',*,*,#24994,.T.); +#25607 = ORIENTED_EDGE('',*,*,#25583,.T.); +#25608 = ORIENTED_EDGE('',*,*,#25609,.T.); +#25609 = EDGE_CURVE('',#25584,#25610,#25612,.T.); +#25610 = VERTEX_POINT('',#25611); +#25611 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17)); +#25612 = CIRCLE('',#25613,0.25); +#25613 = AXIS2_PLACEMENT_3D('',#25614,#25615,#25616); +#25614 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#25615 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34)); +#25616 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#25617 = ORIENTED_EDGE('',*,*,#25618,.T.); +#25618 = EDGE_CURVE('',#25610,#25619,#25621,.T.); +#25619 = VERTEX_POINT('',#25620); +#25620 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#25621 = LINE('',#25622,#25623); +#25622 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17)); +#25623 = VECTOR('',#25624,1.); +#25624 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#25625 = ORIENTED_EDGE('',*,*,#25626,.T.); +#25626 = EDGE_CURVE('',#25619,#25627,#25629,.T.); +#25627 = VERTEX_POINT('',#25628); +#25628 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#25629 = LINE('',#25630,#25631); +#25630 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#25631 = VECTOR('',#25632,1.); +#25632 = DIRECTION('',(0.,0.,1.)); +#25633 = ORIENTED_EDGE('',*,*,#25634,.T.); +#25634 = EDGE_CURVE('',#25627,#25635,#25637,.T.); +#25635 = VERTEX_POINT('',#25636); +#25636 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.15)); +#25637 = LINE('',#25638,#25639); +#25638 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#25639 = VECTOR('',#25640,1.); +#25640 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#25641 = ORIENTED_EDGE('',*,*,#25642,.T.); +#25642 = EDGE_CURVE('',#25635,#25643,#25645,.T.); +#25643 = VERTEX_POINT('',#25644); +#25644 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#25645 = CIRCLE('',#25646,0.1); +#25646 = AXIS2_PLACEMENT_3D('',#25647,#25648,#25649); +#25647 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#25648 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47)); +#25649 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#25650 = ORIENTED_EDGE('',*,*,#25651,.T.); +#25651 = EDGE_CURVE('',#25643,#25652,#25654,.T.); +#25652 = VERTEX_POINT('',#25653); +#25653 = CARTESIAN_POINT('',(-0.946201938253,-0.75,0.518412044417)); +#25654 = LINE('',#25655,#25656); +#25655 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#25656 = VECTOR('',#25657,1.); +#25657 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#25658 = ORIENTED_EDGE('',*,*,#25659,.T.); +#25659 = EDGE_CURVE('',#25652,#25027,#25660,.T.); +#25660 = CIRCLE('',#25661,0.25); +#25661 = AXIS2_PLACEMENT_3D('',#25662,#25663,#25664); +#25662 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#25663 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25664 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#25665 = PLANE('',#25666); +#25666 = AXIS2_PLACEMENT_3D('',#25667,#25668,#25669); +#25667 = CARTESIAN_POINT('',(-0.931323080229,-0.75,0.33452717391)); +#25668 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25669 = DIRECTION('',(0.,-0.,1.)); +#25670 = ADVANCED_FACE('',(#25671),#25682,.F.); +#25671 = FACE_BOUND('',#25672,.F.); +#25672 = EDGE_LOOP('',(#25673,#25674,#25675,#25676)); +#25673 = ORIENTED_EDGE('',*,*,#25043,.T.); +#25674 = ORIENTED_EDGE('',*,*,#25250,.T.); +#25675 = ORIENTED_EDGE('',*,*,#25297,.F.); +#25676 = ORIENTED_EDGE('',*,*,#25677,.F.); +#25677 = EDGE_CURVE('',#25027,#25290,#25678,.T.); +#25678 = LINE('',#25679,#25680); +#25679 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#25680 = VECTOR('',#25681,1.); +#25681 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#25682 = PLANE('',#25683); +#25683 = AXIS2_PLACEMENT_3D('',#25684,#25685,#25686); +#25684 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#25685 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#25686 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#25687 = ADVANCED_FACE('',(#25688),#25757,.F.); +#25688 = FACE_BOUND('',#25689,.F.); +#25689 = EDGE_LOOP('',(#25690,#25691,#25692,#25700,#25709,#25717,#25725, + #25733,#25742,#25750)); +#25690 = ORIENTED_EDGE('',*,*,#25035,.F.); +#25691 = ORIENTED_EDGE('',*,*,#25075,.T.); +#25692 = ORIENTED_EDGE('',*,*,#25693,.T.); +#25693 = EDGE_CURVE('',#25068,#25694,#25696,.T.); +#25694 = VERTEX_POINT('',#25695); +#25695 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#25696 = LINE('',#25697,#25698); +#25697 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#25698 = VECTOR('',#25699,1.); +#25699 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#25700 = ORIENTED_EDGE('',*,*,#25701,.T.); +#25701 = EDGE_CURVE('',#25694,#25702,#25704,.T.); +#25702 = VERTEX_POINT('',#25703); +#25703 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#25704 = CIRCLE('',#25705,0.25); +#25705 = AXIS2_PLACEMENT_3D('',#25706,#25707,#25708); +#25706 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#25707 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34)); +#25708 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#25709 = ORIENTED_EDGE('',*,*,#25710,.T.); +#25710 = EDGE_CURVE('',#25702,#25711,#25713,.T.); +#25711 = VERTEX_POINT('',#25712); +#25712 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#25713 = LINE('',#25714,#25715); +#25714 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#25715 = VECTOR('',#25716,1.); +#25716 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#25717 = ORIENTED_EDGE('',*,*,#25718,.T.); +#25718 = EDGE_CURVE('',#25711,#25719,#25721,.T.); +#25719 = VERTEX_POINT('',#25720); +#25720 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#25721 = LINE('',#25722,#25723); +#25722 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#25723 = VECTOR('',#25724,1.); +#25724 = DIRECTION('',(0.,0.,1.)); +#25725 = ORIENTED_EDGE('',*,*,#25726,.T.); +#25726 = EDGE_CURVE('',#25719,#25727,#25729,.T.); +#25727 = VERTEX_POINT('',#25728); +#25728 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#25729 = LINE('',#25730,#25731); +#25730 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#25731 = VECTOR('',#25732,1.); +#25732 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#25733 = ORIENTED_EDGE('',*,*,#25734,.T.); +#25734 = EDGE_CURVE('',#25727,#25735,#25737,.T.); +#25735 = VERTEX_POINT('',#25736); +#25736 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#25737 = CIRCLE('',#25738,0.1); +#25738 = AXIS2_PLACEMENT_3D('',#25739,#25740,#25741); +#25739 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#25740 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47)); +#25741 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#25742 = ORIENTED_EDGE('',*,*,#25743,.T.); +#25743 = EDGE_CURVE('',#25735,#25744,#25746,.T.); +#25744 = VERTEX_POINT('',#25745); +#25745 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#25746 = LINE('',#25747,#25748); +#25747 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#25748 = VECTOR('',#25749,1.); +#25749 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#25750 = ORIENTED_EDGE('',*,*,#25751,.T.); +#25751 = EDGE_CURVE('',#25744,#25036,#25752,.T.); +#25752 = CIRCLE('',#25753,0.25); +#25753 = AXIS2_PLACEMENT_3D('',#25754,#25755,#25756); +#25754 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#25755 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25756 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#25757 = PLANE('',#25758); +#25758 = AXIS2_PLACEMENT_3D('',#25759,#25760,#25761); +#25759 = CARTESIAN_POINT('',(-0.931323080229,0.75,0.33452717391)); +#25760 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25761 = DIRECTION('',(0.,-0.,1.)); +#25762 = ADVANCED_FACE('',(#25763),#25781,.F.); +#25763 = FACE_BOUND('',#25764,.F.); +#25764 = EDGE_LOOP('',(#25765,#25766,#25774,#25780)); +#25765 = ORIENTED_EDGE('',*,*,#25067,.T.); +#25766 = ORIENTED_EDGE('',*,*,#25767,.T.); +#25767 = EDGE_CURVE('',#25059,#25768,#25770,.T.); +#25768 = VERTEX_POINT('',#25769); +#25769 = CARTESIAN_POINT('',(-0.843471632406,1.15,0.206587955583)); +#25770 = LINE('',#25771,#25772); +#25771 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#25772 = VECTOR('',#25773,1.); +#25773 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#25774 = ORIENTED_EDGE('',*,*,#25775,.F.); +#25775 = EDGE_CURVE('',#25694,#25768,#25776,.T.); +#25776 = LINE('',#25777,#25778); +#25777 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#25778 = VECTOR('',#25779,1.); +#25779 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25780 = ORIENTED_EDGE('',*,*,#25693,.F.); +#25781 = PLANE('',#25782); +#25782 = AXIS2_PLACEMENT_3D('',#25783,#25784,#25785); +#25783 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#25784 = DIRECTION('',(-0.987833053268,1.130315865527E-17,0.155518033909 + )); +#25785 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#25786 = ADVANCED_FACE('',(#25787),#25849,.T.); +#25787 = FACE_BOUND('',#25788,.T.); +#25788 = EDGE_LOOP('',(#25789,#25790,#25791,#25792,#25801,#25809,#25817, + #25825,#25834,#25842)); +#25789 = ORIENTED_EDGE('',*,*,#25090,.F.); +#25790 = ORIENTED_EDGE('',*,*,#25058,.T.); +#25791 = ORIENTED_EDGE('',*,*,#25767,.T.); +#25792 = ORIENTED_EDGE('',*,*,#25793,.T.); +#25793 = EDGE_CURVE('',#25768,#25794,#25796,.T.); +#25794 = VERTEX_POINT('',#25795); +#25795 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#25796 = CIRCLE('',#25797,0.25); +#25797 = AXIS2_PLACEMENT_3D('',#25798,#25799,#25800); +#25798 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#25799 = DIRECTION('',(1.144237745222E-17,1.,3.851859888774E-34)); +#25800 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#25801 = ORIENTED_EDGE('',*,*,#25802,.T.); +#25802 = EDGE_CURVE('',#25794,#25803,#25805,.T.); +#25803 = VERTEX_POINT('',#25804); +#25804 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#25805 = LINE('',#25806,#25807); +#25806 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#25807 = VECTOR('',#25808,1.); +#25808 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#25809 = ORIENTED_EDGE('',*,*,#25810,.T.); +#25810 = EDGE_CURVE('',#25803,#25811,#25813,.T.); +#25811 = VERTEX_POINT('',#25812); +#25812 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#25813 = LINE('',#25814,#25815); +#25814 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#25815 = VECTOR('',#25816,1.); +#25816 = DIRECTION('',(0.,0.,1.)); +#25817 = ORIENTED_EDGE('',*,*,#25818,.T.); +#25818 = EDGE_CURVE('',#25811,#25819,#25821,.T.); +#25819 = VERTEX_POINT('',#25820); +#25820 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.15)); +#25821 = LINE('',#25822,#25823); +#25822 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#25823 = VECTOR('',#25824,1.); +#25824 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#25825 = ORIENTED_EDGE('',*,*,#25826,.T.); +#25826 = EDGE_CURVE('',#25819,#25827,#25829,.T.); +#25827 = VERTEX_POINT('',#25828); +#25828 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#25829 = CIRCLE('',#25830,0.1); +#25830 = AXIS2_PLACEMENT_3D('',#25831,#25832,#25833); +#25831 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#25832 = DIRECTION('',(-1.144237745222E-17,-1.,1.094764425254E-47)); +#25833 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#25834 = ORIENTED_EDGE('',*,*,#25835,.T.); +#25835 = EDGE_CURVE('',#25827,#25836,#25838,.T.); +#25836 = VERTEX_POINT('',#25837); +#25837 = CARTESIAN_POINT('',(-0.946201938253,1.15,0.518412044417)); +#25838 = LINE('',#25839,#25840); +#25839 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#25840 = VECTOR('',#25841,1.); +#25841 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#25842 = ORIENTED_EDGE('',*,*,#25843,.T.); +#25843 = EDGE_CURVE('',#25836,#24926,#25844,.T.); +#25844 = CIRCLE('',#25845,0.25); +#25845 = AXIS2_PLACEMENT_3D('',#25846,#25847,#25848); +#25846 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#25847 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25848 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#25849 = PLANE('',#25850); +#25850 = AXIS2_PLACEMENT_3D('',#25851,#25852,#25853); +#25851 = CARTESIAN_POINT('',(-0.931323080229,1.15,0.33452717391)); +#25852 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#25853 = DIRECTION('',(0.,-0.,1.)); +#25854 = ADVANCED_FACE('',(#25855),#25924,.F.); +#25855 = FACE_BOUND('',#25856,.F.); +#25856 = EDGE_LOOP('',(#25857,#25858,#25859,#25867,#25876,#25884,#25892, + #25900,#25909,#25917)); +#25857 = ORIENTED_EDGE('',*,*,#25109,.F.); +#25858 = ORIENTED_EDGE('',*,*,#25142,.T.); +#25859 = ORIENTED_EDGE('',*,*,#25860,.T.); +#25860 = EDGE_CURVE('',#25135,#25861,#25863,.T.); +#25861 = VERTEX_POINT('',#25862); +#25862 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#25863 = LINE('',#25864,#25865); +#25864 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#25865 = VECTOR('',#25866,1.); +#25866 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#25867 = ORIENTED_EDGE('',*,*,#25868,.T.); +#25868 = EDGE_CURVE('',#25861,#25869,#25871,.T.); +#25869 = VERTEX_POINT('',#25870); +#25870 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#25871 = CIRCLE('',#25872,0.25); +#25872 = AXIS2_PLACEMENT_3D('',#25873,#25874,#25875); +#25873 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#25874 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25875 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#25876 = ORIENTED_EDGE('',*,*,#25877,.T.); +#25877 = EDGE_CURVE('',#25869,#25878,#25880,.T.); +#25878 = VERTEX_POINT('',#25879); +#25879 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#25880 = LINE('',#25881,#25882); +#25881 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#25882 = VECTOR('',#25883,1.); +#25883 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#25884 = ORIENTED_EDGE('',*,*,#25885,.T.); +#25885 = EDGE_CURVE('',#25878,#25886,#25888,.T.); +#25886 = VERTEX_POINT('',#25887); +#25887 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#25888 = LINE('',#25889,#25890); +#25889 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#25890 = VECTOR('',#25891,1.); +#25891 = DIRECTION('',(0.,0.,1.)); +#25892 = ORIENTED_EDGE('',*,*,#25893,.T.); +#25893 = EDGE_CURVE('',#25886,#25894,#25896,.T.); +#25894 = VERTEX_POINT('',#25895); +#25895 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#25896 = LINE('',#25897,#25898); +#25897 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#25898 = VECTOR('',#25899,1.); +#25899 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#25900 = ORIENTED_EDGE('',*,*,#25901,.T.); +#25901 = EDGE_CURVE('',#25894,#25902,#25904,.T.); +#25902 = VERTEX_POINT('',#25903); +#25903 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#25904 = CIRCLE('',#25905,0.1); +#25905 = AXIS2_PLACEMENT_3D('',#25906,#25907,#25908); +#25906 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#25907 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#25908 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#25909 = ORIENTED_EDGE('',*,*,#25910,.T.); +#25910 = EDGE_CURVE('',#25902,#25911,#25913,.T.); +#25911 = VERTEX_POINT('',#25912); +#25912 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#25913 = LINE('',#25914,#25915); +#25914 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#25915 = VECTOR('',#25916,1.); +#25916 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#25917 = ORIENTED_EDGE('',*,*,#25918,.T.); +#25918 = EDGE_CURVE('',#25911,#24870,#25919,.T.); +#25919 = CIRCLE('',#25920,0.25); +#25920 = AXIS2_PLACEMENT_3D('',#25921,#25922,#25923); +#25921 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#25922 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25923 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#25924 = PLANE('',#25925); +#25925 = AXIS2_PLACEMENT_3D('',#25926,#25927,#25928); +#25926 = CARTESIAN_POINT('',(0.931323080229,0.2,0.33452717391)); +#25927 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25928 = DIRECTION('',(0.,0.,1.)); +#25929 = ADVANCED_FACE('',(#25930),#25948,.F.); +#25930 = FACE_BOUND('',#25931,.F.); +#25931 = EDGE_LOOP('',(#25932,#25933,#25941,#25947)); +#25932 = ORIENTED_EDGE('',*,*,#25134,.T.); +#25933 = ORIENTED_EDGE('',*,*,#25934,.T.); +#25934 = EDGE_CURVE('',#25126,#25935,#25937,.T.); +#25935 = VERTEX_POINT('',#25936); +#25936 = CARTESIAN_POINT('',(0.843471632406,-0.2,0.206587955583)); +#25937 = LINE('',#25938,#25939); +#25938 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#25939 = VECTOR('',#25940,1.); +#25940 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#25941 = ORIENTED_EDGE('',*,*,#25942,.F.); +#25942 = EDGE_CURVE('',#25861,#25935,#25943,.T.); +#25943 = LINE('',#25944,#25945); +#25944 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#25945 = VECTOR('',#25946,1.); +#25946 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25947 = ORIENTED_EDGE('',*,*,#25860,.F.); +#25948 = PLANE('',#25949); +#25949 = AXIS2_PLACEMENT_3D('',#25950,#25951,#25952); +#25950 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#25951 = DIRECTION('',(0.987833053268,1.096715000224E-16,0.155518033909) + ); +#25952 = DIRECTION('',(0.155518033909,1.726597019897E-17,-0.987833053268 + )); +#25953 = ADVANCED_FACE('',(#25954),#26016,.T.); +#25954 = FACE_BOUND('',#25955,.T.); +#25955 = EDGE_LOOP('',(#25956,#25957,#25958,#25959,#25968,#25976,#25984, + #25992,#26001,#26009)); +#25956 = ORIENTED_EDGE('',*,*,#25157,.F.); +#25957 = ORIENTED_EDGE('',*,*,#25125,.T.); +#25958 = ORIENTED_EDGE('',*,*,#25934,.T.); +#25959 = ORIENTED_EDGE('',*,*,#25960,.T.); +#25960 = EDGE_CURVE('',#25935,#25961,#25963,.T.); +#25961 = VERTEX_POINT('',#25962); +#25962 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#25963 = CIRCLE('',#25964,0.25); +#25964 = AXIS2_PLACEMENT_3D('',#25965,#25966,#25967); +#25965 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#25966 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#25967 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#25968 = ORIENTED_EDGE('',*,*,#25969,.T.); +#25969 = EDGE_CURVE('',#25961,#25970,#25972,.T.); +#25970 = VERTEX_POINT('',#25971); +#25971 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#25972 = LINE('',#25973,#25974); +#25973 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#25974 = VECTOR('',#25975,1.); +#25975 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#25976 = ORIENTED_EDGE('',*,*,#25977,.T.); +#25977 = EDGE_CURVE('',#25970,#25978,#25980,.T.); +#25978 = VERTEX_POINT('',#25979); +#25979 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#25980 = LINE('',#25981,#25982); +#25981 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#25982 = VECTOR('',#25983,1.); +#25983 = DIRECTION('',(0.,0.,1.)); +#25984 = ORIENTED_EDGE('',*,*,#25985,.T.); +#25985 = EDGE_CURVE('',#25978,#25986,#25988,.T.); +#25986 = VERTEX_POINT('',#25987); +#25987 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.15)); +#25988 = LINE('',#25989,#25990); +#25989 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#25990 = VECTOR('',#25991,1.); +#25991 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#25992 = ORIENTED_EDGE('',*,*,#25993,.T.); +#25993 = EDGE_CURVE('',#25986,#25994,#25996,.T.); +#25994 = VERTEX_POINT('',#25995); +#25995 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#25996 = CIRCLE('',#25997,0.1); +#25997 = AXIS2_PLACEMENT_3D('',#25998,#25999,#26000); +#25998 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#25999 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#26000 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#26001 = ORIENTED_EDGE('',*,*,#26002,.T.); +#26002 = EDGE_CURVE('',#25994,#26003,#26005,.T.); +#26003 = VERTEX_POINT('',#26004); +#26004 = CARTESIAN_POINT('',(0.946201938253,-0.2,0.518412044417)); +#26005 = LINE('',#26006,#26007); +#26006 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#26007 = VECTOR('',#26008,1.); +#26008 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#26009 = ORIENTED_EDGE('',*,*,#26010,.T.); +#26010 = EDGE_CURVE('',#26003,#25158,#26011,.T.); +#26011 = CIRCLE('',#26012,0.25); +#26012 = AXIS2_PLACEMENT_3D('',#26013,#26014,#26015); +#26013 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#26014 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26015 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#26016 = PLANE('',#26017); +#26017 = AXIS2_PLACEMENT_3D('',#26018,#26019,#26020); +#26018 = CARTESIAN_POINT('',(0.931323080229,-0.2,0.33452717391)); +#26019 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26020 = DIRECTION('',(0.,0.,1.)); +#26021 = ADVANCED_FACE('',(#26022),#26033,.T.); +#26022 = FACE_BOUND('',#26023,.T.); +#26023 = EDGE_LOOP('',(#26024,#26025,#26026,#26027)); +#26024 = ORIENTED_EDGE('',*,*,#25751,.T.); +#26025 = ORIENTED_EDGE('',*,*,#25258,.T.); +#26026 = ORIENTED_EDGE('',*,*,#25843,.F.); +#26027 = ORIENTED_EDGE('',*,*,#26028,.F.); +#26028 = EDGE_CURVE('',#25744,#25836,#26029,.T.); +#26029 = LINE('',#26030,#26031); +#26030 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#26031 = VECTOR('',#26032,1.); +#26032 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26033 = CYLINDRICAL_SURFACE('',#26034,0.25); +#26034 = AXIS2_PLACEMENT_3D('',#26035,#26036,#26037); +#26035 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#26036 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#26037 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#26038 = ADVANCED_FACE('',(#26039),#26050,.F.); +#26039 = FACE_BOUND('',#26040,.F.); +#26040 = EDGE_LOOP('',(#26041,#26042,#26048,#26049)); +#26041 = ORIENTED_EDGE('',*,*,#25469,.F.); +#26042 = ORIENTED_EDGE('',*,*,#26043,.T.); +#26043 = EDGE_CURVE('',#24972,#25027,#26044,.T.); +#26044 = LINE('',#26045,#26046); +#26045 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#26046 = VECTOR('',#26047,1.); +#26047 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26048 = ORIENTED_EDGE('',*,*,#25677,.T.); +#26049 = ORIENTED_EDGE('',*,*,#25289,.F.); +#26050 = PLANE('',#26051); +#26051 = AXIS2_PLACEMENT_3D('',#26052,#26053,#26054); +#26052 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#26053 = DIRECTION('',(0.,0.,-1.)); +#26054 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#26055 = ADVANCED_FACE('',(#26056,#26085),#26096,.T.); +#26056 = FACE_BOUND('',#26057,.T.); +#26057 = EDGE_LOOP('',(#26058,#26059,#26060,#26061,#26069,#26077,#26083, + #26084)); +#26058 = ORIENTED_EDGE('',*,*,#25364,.F.); +#26059 = ORIENTED_EDGE('',*,*,#25341,.F.); +#26060 = ORIENTED_EDGE('',*,*,#25312,.F.); +#26061 = ORIENTED_EDGE('',*,*,#26062,.F.); +#26062 = EDGE_CURVE('',#26063,#25313,#26065,.T.); +#26063 = VERTEX_POINT('',#26064); +#26064 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#26065 = LINE('',#26066,#26067); +#26066 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#26067 = VECTOR('',#26068,1.); +#26068 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#26069 = ORIENTED_EDGE('',*,*,#26070,.F.); +#26070 = EDGE_CURVE('',#26071,#26063,#26073,.T.); +#26071 = VERTEX_POINT('',#26072); +#26072 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#26073 = LINE('',#26074,#26075); +#26074 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#26075 = VECTOR('',#26076,1.); +#26076 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#26077 = ORIENTED_EDGE('',*,*,#26078,.F.); +#26078 = EDGE_CURVE('',#25420,#26071,#26079,.T.); +#26079 = LINE('',#26080,#26081); +#26080 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#26081 = VECTOR('',#26082,1.); +#26082 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#26083 = ORIENTED_EDGE('',*,*,#25426,.F.); +#26084 = ORIENTED_EDGE('',*,*,#25387,.F.); +#26085 = FACE_BOUND('',#26086,.T.); +#26086 = EDGE_LOOP('',(#26087)); +#26087 = ORIENTED_EDGE('',*,*,#26088,.T.); +#26088 = EDGE_CURVE('',#26089,#26089,#26091,.T.); +#26089 = VERTEX_POINT('',#26090); +#26090 = CARTESIAN_POINT('',(-0.428243103516,1.178243103516,1.2)); +#26091 = CIRCLE('',#26092,5.E-02); +#26092 = AXIS2_PLACEMENT_3D('',#26093,#26094,#26095); +#26093 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#26094 = DIRECTION('',(0.,-0.,-1.)); +#26095 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26096 = PLANE('',#26097); +#26097 = AXIS2_PLACEMENT_3D('',#26098,#26099,#26100); +#26098 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#26099 = DIRECTION('',(0.,0.,1.)); +#26100 = DIRECTION('',(0.369013679242,-0.929423963825,0.)); +#26101 = ADVANCED_FACE('',(#26102),#26112,.F.); +#26102 = FACE_BOUND('',#26103,.F.); +#26103 = EDGE_LOOP('',(#26104,#26105,#26106,#26107)); +#26104 = ORIENTED_EDGE('',*,*,#25476,.T.); +#26105 = ORIENTED_EDGE('',*,*,#25320,.T.); +#26106 = ORIENTED_EDGE('',*,*,#26062,.F.); +#26107 = ORIENTED_EDGE('',*,*,#26108,.F.); +#26108 = EDGE_CURVE('',#25477,#26063,#26109,.T.); +#26109 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#26110,#26111),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#26110 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#26111 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#26112 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#26113,#26114) + ,(#26115,#26116 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#26113 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#26114 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#26115 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#26116 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#26117 = ADVANCED_FACE('',(#26118),#26128,.F.); +#26118 = FACE_BOUND('',#26119,.F.); +#26119 = EDGE_LOOP('',(#26120,#26121,#26126,#26127)); +#26120 = ORIENTED_EDGE('',*,*,#25492,.T.); +#26121 = ORIENTED_EDGE('',*,*,#26122,.T.); +#26122 = EDGE_CURVE('',#25485,#26071,#26123,.T.); +#26123 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#26124,#26125),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#26124 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#26125 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#26126 = ORIENTED_EDGE('',*,*,#26078,.F.); +#26127 = ORIENTED_EDGE('',*,*,#25419,.F.); +#26128 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#26129,#26130) + ,(#26131,#26132 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#26129 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#26130 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#26131 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#26132 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#26133 = ADVANCED_FACE('',(#26134),#26145,.T.); +#26134 = FACE_BOUND('',#26135,.T.); +#26135 = EDGE_LOOP('',(#26136,#26137,#26138,#26139)); +#26136 = ORIENTED_EDGE('',*,*,#25918,.T.); +#26137 = ORIENTED_EDGE('',*,*,#25442,.T.); +#26138 = ORIENTED_EDGE('',*,*,#26010,.F.); +#26139 = ORIENTED_EDGE('',*,*,#26140,.F.); +#26140 = EDGE_CURVE('',#25911,#26003,#26141,.T.); +#26141 = LINE('',#26142,#26143); +#26142 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#26143 = VECTOR('',#26144,1.); +#26144 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26145 = CYLINDRICAL_SURFACE('',#26146,0.25); +#26146 = AXIS2_PLACEMENT_3D('',#26147,#26148,#26149); +#26147 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#26148 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#26149 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#26150 = ADVANCED_FACE('',(#26151),#26157,.F.); +#26151 = FACE_BOUND('',#26152,.F.); +#26152 = EDGE_LOOP('',(#26153,#26154,#26155,#26156)); +#26153 = ORIENTED_EDGE('',*,*,#25484,.T.); +#26154 = ORIENTED_EDGE('',*,*,#26108,.T.); +#26155 = ORIENTED_EDGE('',*,*,#26070,.F.); +#26156 = ORIENTED_EDGE('',*,*,#26122,.F.); +#26157 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#26158,#26159) + ,(#26160,#26161 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26158 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#26159 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#26160 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#26161 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#26162 = ADVANCED_FACE('',(#26163),#26174,.T.); +#26163 = FACE_BOUND('',#26164,.T.); +#26164 = EDGE_LOOP('',(#26165,#26166,#26167,#26168)); +#26165 = ORIENTED_EDGE('',*,*,#25567,.T.); +#26166 = ORIENTED_EDGE('',*,*,#26043,.T.); +#26167 = ORIENTED_EDGE('',*,*,#25659,.F.); +#26168 = ORIENTED_EDGE('',*,*,#26169,.F.); +#26169 = EDGE_CURVE('',#25560,#25652,#26170,.T.); +#26170 = LINE('',#26171,#26172); +#26171 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#26172 = VECTOR('',#26173,1.); +#26173 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26174 = CYLINDRICAL_SURFACE('',#26175,0.25); +#26175 = AXIS2_PLACEMENT_3D('',#26176,#26177,#26178); +#26176 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#26177 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#26178 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#26179 = ADVANCED_FACE('',(#26180),#26191,.F.); +#26180 = FACE_BOUND('',#26181,.F.); +#26181 = EDGE_LOOP('',(#26182,#26188,#26189,#26190)); +#26182 = ORIENTED_EDGE('',*,*,#26183,.T.); +#26183 = EDGE_CURVE('',#25551,#25643,#26184,.T.); +#26184 = LINE('',#26185,#26186); +#26185 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#26186 = VECTOR('',#26187,1.); +#26187 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26188 = ORIENTED_EDGE('',*,*,#25651,.T.); +#26189 = ORIENTED_EDGE('',*,*,#26169,.F.); +#26190 = ORIENTED_EDGE('',*,*,#25559,.F.); +#26191 = PLANE('',#26192); +#26192 = AXIS2_PLACEMENT_3D('',#26193,#26194,#26195); +#26193 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#26194 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#26195 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#26196 = ADVANCED_FACE('',(#26197),#26208,.F.); +#26197 = FACE_BOUND('',#26198,.F.); +#26198 = EDGE_LOOP('',(#26199,#26205,#26206,#26207)); +#26199 = ORIENTED_EDGE('',*,*,#26200,.T.); +#26200 = EDGE_CURVE('',#25543,#25635,#26201,.T.); +#26201 = LINE('',#26202,#26203); +#26202 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#26203 = VECTOR('',#26204,1.); +#26204 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26205 = ORIENTED_EDGE('',*,*,#25642,.T.); +#26206 = ORIENTED_EDGE('',*,*,#26183,.F.); +#26207 = ORIENTED_EDGE('',*,*,#25550,.F.); +#26208 = CYLINDRICAL_SURFACE('',#26209,0.1); +#26209 = AXIS2_PLACEMENT_3D('',#26210,#26211,#26212); +#26210 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#26211 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#26212 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#26213 = ADVANCED_FACE('',(#26214),#26225,.F.); +#26214 = FACE_BOUND('',#26215,.F.); +#26215 = EDGE_LOOP('',(#26216,#26222,#26223,#26224)); +#26216 = ORIENTED_EDGE('',*,*,#26217,.T.); +#26217 = EDGE_CURVE('',#25535,#25627,#26218,.T.); +#26218 = LINE('',#26219,#26220); +#26219 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#26220 = VECTOR('',#26221,1.); +#26221 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26222 = ORIENTED_EDGE('',*,*,#25634,.T.); +#26223 = ORIENTED_EDGE('',*,*,#26200,.F.); +#26224 = ORIENTED_EDGE('',*,*,#25542,.F.); +#26225 = PLANE('',#26226); +#26226 = AXIS2_PLACEMENT_3D('',#26227,#26228,#26229); +#26227 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#26228 = DIRECTION('',(0.,0.,-1.)); +#26229 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#26230 = ADVANCED_FACE('',(#26231),#26242,.F.); +#26231 = FACE_BOUND('',#26232,.F.); +#26232 = EDGE_LOOP('',(#26233,#26239,#26240,#26241)); +#26233 = ORIENTED_EDGE('',*,*,#26234,.T.); +#26234 = EDGE_CURVE('',#25527,#25619,#26235,.T.); +#26235 = LINE('',#26236,#26237); +#26236 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#26237 = VECTOR('',#26238,1.); +#26238 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26239 = ORIENTED_EDGE('',*,*,#25626,.T.); +#26240 = ORIENTED_EDGE('',*,*,#26217,.F.); +#26241 = ORIENTED_EDGE('',*,*,#25534,.F.); +#26242 = PLANE('',#26243); +#26243 = AXIS2_PLACEMENT_3D('',#26244,#26245,#26246); +#26244 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#26245 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#26246 = DIRECTION('',(0.,0.,1.)); +#26247 = ADVANCED_FACE('',(#26248),#26259,.F.); +#26248 = FACE_BOUND('',#26249,.F.); +#26249 = EDGE_LOOP('',(#26250,#26256,#26257,#26258)); +#26250 = ORIENTED_EDGE('',*,*,#26251,.T.); +#26251 = EDGE_CURVE('',#25518,#25610,#26252,.T.); +#26252 = LINE('',#26253,#26254); +#26253 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#26254 = VECTOR('',#26255,1.); +#26255 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26256 = ORIENTED_EDGE('',*,*,#25618,.T.); +#26257 = ORIENTED_EDGE('',*,*,#26234,.F.); +#26258 = ORIENTED_EDGE('',*,*,#25526,.F.); +#26259 = PLANE('',#26260); +#26260 = AXIS2_PLACEMENT_3D('',#26261,#26262,#26263); +#26261 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17)); +#26262 = DIRECTION('',(0.,0.,1.)); +#26263 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#26264 = ADVANCED_FACE('',(#26265),#26271,.T.); +#26265 = FACE_BOUND('',#26266,.T.); +#26266 = EDGE_LOOP('',(#26267,#26268,#26269,#26270)); +#26267 = ORIENTED_EDGE('',*,*,#25517,.T.); +#26268 = ORIENTED_EDGE('',*,*,#26251,.T.); +#26269 = ORIENTED_EDGE('',*,*,#25609,.F.); +#26270 = ORIENTED_EDGE('',*,*,#25591,.F.); +#26271 = CYLINDRICAL_SURFACE('',#26272,0.25); +#26272 = AXIS2_PLACEMENT_3D('',#26273,#26274,#26275); +#26273 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#26274 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#26275 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#26276 = ADVANCED_FACE('',(#26277),#26288,.F.); +#26277 = FACE_BOUND('',#26278,.F.); +#26278 = EDGE_LOOP('',(#26279,#26285,#26286,#26287)); +#26279 = ORIENTED_EDGE('',*,*,#26280,.T.); +#26280 = EDGE_CURVE('',#25735,#25827,#26281,.T.); +#26281 = LINE('',#26282,#26283); +#26282 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#26283 = VECTOR('',#26284,1.); +#26284 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26285 = ORIENTED_EDGE('',*,*,#25835,.T.); +#26286 = ORIENTED_EDGE('',*,*,#26028,.F.); +#26287 = ORIENTED_EDGE('',*,*,#25743,.F.); +#26288 = PLANE('',#26289); +#26289 = AXIS2_PLACEMENT_3D('',#26290,#26291,#26292); +#26290 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#26291 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#26292 = DIRECTION('',(0.155518033909,-1.779496044609E-18,0.987833053268 + )); +#26293 = ADVANCED_FACE('',(#26294),#26305,.F.); +#26294 = FACE_BOUND('',#26295,.F.); +#26295 = EDGE_LOOP('',(#26296,#26302,#26303,#26304)); +#26296 = ORIENTED_EDGE('',*,*,#26297,.T.); +#26297 = EDGE_CURVE('',#25727,#25819,#26298,.T.); +#26298 = LINE('',#26299,#26300); +#26299 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#26300 = VECTOR('',#26301,1.); +#26301 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26302 = ORIENTED_EDGE('',*,*,#25826,.T.); +#26303 = ORIENTED_EDGE('',*,*,#26280,.F.); +#26304 = ORIENTED_EDGE('',*,*,#25734,.F.); +#26305 = CYLINDRICAL_SURFACE('',#26306,0.1); +#26306 = AXIS2_PLACEMENT_3D('',#26307,#26308,#26309); +#26307 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#26308 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#26309 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#26310 = ADVANCED_FACE('',(#26311),#26322,.F.); +#26311 = FACE_BOUND('',#26312,.F.); +#26312 = EDGE_LOOP('',(#26313,#26319,#26320,#26321)); +#26313 = ORIENTED_EDGE('',*,*,#26314,.T.); +#26314 = EDGE_CURVE('',#25719,#25811,#26315,.T.); +#26315 = LINE('',#26316,#26317); +#26316 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#26317 = VECTOR('',#26318,1.); +#26318 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26319 = ORIENTED_EDGE('',*,*,#25818,.T.); +#26320 = ORIENTED_EDGE('',*,*,#26297,.F.); +#26321 = ORIENTED_EDGE('',*,*,#25726,.F.); +#26322 = PLANE('',#26323); +#26323 = AXIS2_PLACEMENT_3D('',#26324,#26325,#26326); +#26324 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#26325 = DIRECTION('',(0.,0.,-1.)); +#26326 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#26327 = ADVANCED_FACE('',(#26328),#26339,.F.); +#26328 = FACE_BOUND('',#26329,.F.); +#26329 = EDGE_LOOP('',(#26330,#26336,#26337,#26338)); +#26330 = ORIENTED_EDGE('',*,*,#26331,.T.); +#26331 = EDGE_CURVE('',#25711,#25803,#26332,.T.); +#26332 = LINE('',#26333,#26334); +#26333 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#26334 = VECTOR('',#26335,1.); +#26335 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26336 = ORIENTED_EDGE('',*,*,#25810,.T.); +#26337 = ORIENTED_EDGE('',*,*,#26314,.F.); +#26338 = ORIENTED_EDGE('',*,*,#25718,.F.); +#26339 = PLANE('',#26340); +#26340 = AXIS2_PLACEMENT_3D('',#26341,#26342,#26343); +#26341 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#26342 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#26343 = DIRECTION('',(0.,0.,1.)); +#26344 = ADVANCED_FACE('',(#26345),#26356,.F.); +#26345 = FACE_BOUND('',#26346,.F.); +#26346 = EDGE_LOOP('',(#26347,#26353,#26354,#26355)); +#26347 = ORIENTED_EDGE('',*,*,#26348,.T.); +#26348 = EDGE_CURVE('',#25702,#25794,#26349,.T.); +#26349 = LINE('',#26350,#26351); +#26350 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#26351 = VECTOR('',#26352,1.); +#26352 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#26353 = ORIENTED_EDGE('',*,*,#25802,.T.); +#26354 = ORIENTED_EDGE('',*,*,#26331,.F.); +#26355 = ORIENTED_EDGE('',*,*,#25710,.F.); +#26356 = PLANE('',#26357); +#26357 = AXIS2_PLACEMENT_3D('',#26358,#26359,#26360); +#26358 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#26359 = DIRECTION('',(0.,0.,1.)); +#26360 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#26361 = ADVANCED_FACE('',(#26362),#26368,.T.); +#26362 = FACE_BOUND('',#26363,.T.); +#26363 = EDGE_LOOP('',(#26364,#26365,#26366,#26367)); +#26364 = ORIENTED_EDGE('',*,*,#25701,.T.); +#26365 = ORIENTED_EDGE('',*,*,#26348,.T.); +#26366 = ORIENTED_EDGE('',*,*,#25793,.F.); +#26367 = ORIENTED_EDGE('',*,*,#25775,.F.); +#26368 = CYLINDRICAL_SURFACE('',#26369,0.25); +#26369 = AXIS2_PLACEMENT_3D('',#26370,#26371,#26372); +#26370 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#26371 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#26372 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#26373 = ADVANCED_FACE('',(#26374),#26385,.F.); +#26374 = FACE_BOUND('',#26375,.F.); +#26375 = EDGE_LOOP('',(#26376,#26382,#26383,#26384)); +#26376 = ORIENTED_EDGE('',*,*,#26377,.T.); +#26377 = EDGE_CURVE('',#25902,#25994,#26378,.T.); +#26378 = LINE('',#26379,#26380); +#26379 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#26380 = VECTOR('',#26381,1.); +#26381 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26382 = ORIENTED_EDGE('',*,*,#26002,.T.); +#26383 = ORIENTED_EDGE('',*,*,#26140,.F.); +#26384 = ORIENTED_EDGE('',*,*,#25910,.F.); +#26385 = PLANE('',#26386); +#26386 = AXIS2_PLACEMENT_3D('',#26387,#26388,#26389); +#26387 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#26388 = DIRECTION('',(-0.987833053268,-1.096715000224E-16, + -0.155518033909)); +#26389 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#26390 = ADVANCED_FACE('',(#26391),#26402,.F.); +#26391 = FACE_BOUND('',#26392,.F.); +#26392 = EDGE_LOOP('',(#26393,#26399,#26400,#26401)); +#26393 = ORIENTED_EDGE('',*,*,#26394,.T.); +#26394 = EDGE_CURVE('',#25894,#25986,#26395,.T.); +#26395 = LINE('',#26396,#26397); +#26396 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#26397 = VECTOR('',#26398,1.); +#26398 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26399 = ORIENTED_EDGE('',*,*,#25993,.T.); +#26400 = ORIENTED_EDGE('',*,*,#26377,.F.); +#26401 = ORIENTED_EDGE('',*,*,#25901,.F.); +#26402 = CYLINDRICAL_SURFACE('',#26403,0.1); +#26403 = AXIS2_PLACEMENT_3D('',#26404,#26405,#26406); +#26404 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#26405 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#26406 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#26407 = ADVANCED_FACE('',(#26408),#26419,.F.); +#26408 = FACE_BOUND('',#26409,.F.); +#26409 = EDGE_LOOP('',(#26410,#26416,#26417,#26418)); +#26410 = ORIENTED_EDGE('',*,*,#26411,.T.); +#26411 = EDGE_CURVE('',#25886,#25978,#26412,.T.); +#26412 = LINE('',#26413,#26414); +#26413 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#26414 = VECTOR('',#26415,1.); +#26415 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26416 = ORIENTED_EDGE('',*,*,#25985,.T.); +#26417 = ORIENTED_EDGE('',*,*,#26394,.F.); +#26418 = ORIENTED_EDGE('',*,*,#25893,.F.); +#26419 = PLANE('',#26420); +#26420 = AXIS2_PLACEMENT_3D('',#26421,#26422,#26423); +#26421 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#26422 = DIRECTION('',(0.,0.,-1.)); +#26423 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#26424 = ADVANCED_FACE('',(#26425),#26436,.F.); +#26425 = FACE_BOUND('',#26426,.F.); +#26426 = EDGE_LOOP('',(#26427,#26433,#26434,#26435)); +#26427 = ORIENTED_EDGE('',*,*,#26428,.T.); +#26428 = EDGE_CURVE('',#25878,#25970,#26429,.T.); +#26429 = LINE('',#26430,#26431); +#26430 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#26431 = VECTOR('',#26432,1.); +#26432 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26433 = ORIENTED_EDGE('',*,*,#25977,.T.); +#26434 = ORIENTED_EDGE('',*,*,#26411,.F.); +#26435 = ORIENTED_EDGE('',*,*,#25885,.F.); +#26436 = PLANE('',#26437); +#26437 = AXIS2_PLACEMENT_3D('',#26438,#26439,#26440); +#26438 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#26439 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#26440 = DIRECTION('',(0.,0.,1.)); +#26441 = ADVANCED_FACE('',(#26442),#26453,.F.); +#26442 = FACE_BOUND('',#26443,.F.); +#26443 = EDGE_LOOP('',(#26444,#26450,#26451,#26452)); +#26444 = ORIENTED_EDGE('',*,*,#26445,.T.); +#26445 = EDGE_CURVE('',#25869,#25961,#26446,.T.); +#26446 = LINE('',#26447,#26448); +#26447 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#26448 = VECTOR('',#26449,1.); +#26449 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26450 = ORIENTED_EDGE('',*,*,#25969,.T.); +#26451 = ORIENTED_EDGE('',*,*,#26428,.F.); +#26452 = ORIENTED_EDGE('',*,*,#25877,.F.); +#26453 = PLANE('',#26454); +#26454 = AXIS2_PLACEMENT_3D('',#26455,#26456,#26457); +#26455 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#26456 = DIRECTION('',(0.,0.,1.)); +#26457 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#26458 = ADVANCED_FACE('',(#26459),#26465,.T.); +#26459 = FACE_BOUND('',#26460,.T.); +#26460 = EDGE_LOOP('',(#26461,#26462,#26463,#26464)); +#26461 = ORIENTED_EDGE('',*,*,#25868,.T.); +#26462 = ORIENTED_EDGE('',*,*,#26445,.T.); +#26463 = ORIENTED_EDGE('',*,*,#25960,.F.); +#26464 = ORIENTED_EDGE('',*,*,#25942,.F.); +#26465 = CYLINDRICAL_SURFACE('',#26466,0.25); +#26466 = AXIS2_PLACEMENT_3D('',#26467,#26468,#26469); +#26467 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#26468 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#26469 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#26470 = ADVANCED_FACE('',(#26471),#26474,.F.); +#26471 = FACE_BOUND('',#26472,.T.); +#26472 = EDGE_LOOP('',(#26473)); +#26473 = ORIENTED_EDGE('',*,*,#26088,.F.); +#26474 = PLANE('',#26475); +#26475 = AXIS2_PLACEMENT_3D('',#26476,#26477,#26478); +#26476 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#26477 = DIRECTION('',(0.,0.,-1.)); +#26478 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#26479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#26483)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#26480,#26481,#26482)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#26480 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#26481 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#26482 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#26483 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#26480, + 'distance_accuracy_value','confusion accuracy'); +#26484 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#26485,#26487); +#26485 = ( REPRESENTATION_RELATIONSHIP('','',#24496,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#26486) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#26486 = ITEM_DEFINED_TRANSFORMATION('','',#11,#135); +#26487 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #26488); +#26488 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('31','Q1','',#5,#24491,$); +#26489 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#24493)); +#26490 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#26491,#26493); +#26491 = ( REPRESENTATION_RELATIONSHIP('','',#24496,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#26492) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#26492 = ITEM_DEFINED_TRANSFORMATION('','',#11,#139); +#26493 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #26494); +#26494 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('32','Q2','',#5,#24491,$); +#26495 = SHAPE_DEFINITION_REPRESENTATION(#26496,#26502); +#26496 = PRODUCT_DEFINITION_SHAPE('','',#26497); +#26497 = PRODUCT_DEFINITION('design','',#26498,#26501); +#26498 = PRODUCT_DEFINITION_FORMATION('','',#26499); +#26499 = PRODUCT('R_0603_1608Metric','R_0603_1608Metric','',(#26500)); +#26500 = PRODUCT_CONTEXT('',#2,'mechanical'); +#26501 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#26502 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#26503),#27293); +#26503 = MANIFOLD_SOLID_BREP('',#26504); +#26504 = CLOSED_SHELL('',(#26505,#26545,#26628,#26653,#26678,#26745, + #26762,#26779,#26828,#26845,#26862,#26911,#26928,#26997,#27028, + #27052,#27121,#27145,#27162,#27179,#27196,#27213,#27230,#27247, + #27264,#27281)); +#26505 = ADVANCED_FACE('',(#26506),#26540,.F.); +#26506 = FACE_BOUND('',#26507,.F.); +#26507 = EDGE_LOOP('',(#26508,#26518,#26526,#26534)); +#26508 = ORIENTED_EDGE('',*,*,#26509,.F.); +#26509 = EDGE_CURVE('',#26510,#26512,#26514,.T.); +#26510 = VERTEX_POINT('',#26511); +#26511 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02)); +#26512 = VERTEX_POINT('',#26513); +#26513 = CARTESIAN_POINT('',(-0.8,-0.4,0.405)); +#26514 = LINE('',#26515,#26516); +#26515 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#26516 = VECTOR('',#26517,1.); +#26517 = DIRECTION('',(0.,0.,1.)); +#26518 = ORIENTED_EDGE('',*,*,#26519,.T.); +#26519 = EDGE_CURVE('',#26510,#26520,#26522,.T.); +#26520 = VERTEX_POINT('',#26521); +#26521 = CARTESIAN_POINT('',(-0.8,0.4,4.5E-02)); +#26522 = LINE('',#26523,#26524); +#26523 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02)); +#26524 = VECTOR('',#26525,1.); +#26525 = DIRECTION('',(0.,1.,0.)); +#26526 = ORIENTED_EDGE('',*,*,#26527,.T.); +#26527 = EDGE_CURVE('',#26520,#26528,#26530,.T.); +#26528 = VERTEX_POINT('',#26529); +#26529 = CARTESIAN_POINT('',(-0.8,0.4,0.405)); +#26530 = LINE('',#26531,#26532); +#26531 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#26532 = VECTOR('',#26533,1.); +#26533 = DIRECTION('',(0.,0.,1.)); +#26534 = ORIENTED_EDGE('',*,*,#26535,.F.); +#26535 = EDGE_CURVE('',#26512,#26528,#26536,.T.); +#26536 = LINE('',#26537,#26538); +#26537 = CARTESIAN_POINT('',(-0.8,-0.4,0.405)); +#26538 = VECTOR('',#26539,1.); +#26539 = DIRECTION('',(0.,1.,0.)); +#26540 = PLANE('',#26541); +#26541 = AXIS2_PLACEMENT_3D('',#26542,#26543,#26544); +#26542 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#26543 = DIRECTION('',(1.,0.,0.)); +#26544 = DIRECTION('',(0.,0.,1.)); +#26545 = ADVANCED_FACE('',(#26546),#26623,.F.); +#26546 = FACE_BOUND('',#26547,.F.); +#26547 = EDGE_LOOP('',(#26548,#26558,#26565,#26566,#26575,#26583,#26592, + #26600,#26608,#26616)); +#26548 = ORIENTED_EDGE('',*,*,#26549,.F.); +#26549 = EDGE_CURVE('',#26550,#26552,#26554,.T.); +#26550 = VERTEX_POINT('',#26551); +#26551 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17)); +#26552 = VERTEX_POINT('',#26553); +#26553 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17)); +#26554 = LINE('',#26555,#26556); +#26555 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#26556 = VECTOR('',#26557,1.); +#26557 = DIRECTION('',(1.,0.,0.)); +#26558 = ORIENTED_EDGE('',*,*,#26559,.F.); +#26559 = EDGE_CURVE('',#26510,#26550,#26560,.T.); +#26560 = CIRCLE('',#26561,4.5E-02); +#26561 = AXIS2_PLACEMENT_3D('',#26562,#26563,#26564); +#26562 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26563 = DIRECTION('',(0.,-1.,0.)); +#26564 = DIRECTION('',(0.,0.,1.)); +#26565 = ORIENTED_EDGE('',*,*,#26509,.T.); +#26566 = ORIENTED_EDGE('',*,*,#26567,.T.); +#26567 = EDGE_CURVE('',#26512,#26568,#26570,.T.); +#26568 = VERTEX_POINT('',#26569); +#26569 = CARTESIAN_POINT('',(-0.755,-0.4,0.45)); +#26570 = CIRCLE('',#26571,4.5E-02); +#26571 = AXIS2_PLACEMENT_3D('',#26572,#26573,#26574); +#26572 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#26573 = DIRECTION('',(0.,1.,0.)); +#26574 = DIRECTION('',(0.,-0.,1.)); +#26575 = ORIENTED_EDGE('',*,*,#26576,.T.); +#26576 = EDGE_CURVE('',#26568,#26577,#26579,.T.); +#26577 = VERTEX_POINT('',#26578); +#26578 = CARTESIAN_POINT('',(-0.545,-0.4,0.45)); +#26579 = LINE('',#26580,#26581); +#26580 = CARTESIAN_POINT('',(-0.8,-0.4,0.45)); +#26581 = VECTOR('',#26582,1.); +#26582 = DIRECTION('',(1.,0.,0.)); +#26583 = ORIENTED_EDGE('',*,*,#26584,.F.); +#26584 = EDGE_CURVE('',#26585,#26577,#26587,.T.); +#26585 = VERTEX_POINT('',#26586); +#26586 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#26587 = CIRCLE('',#26588,4.5E-02); +#26588 = AXIS2_PLACEMENT_3D('',#26589,#26590,#26591); +#26589 = CARTESIAN_POINT('',(-0.545,-0.4,0.405)); +#26590 = DIRECTION('',(0.,-1.,0.)); +#26591 = DIRECTION('',(0.,0.,1.)); +#26592 = ORIENTED_EDGE('',*,*,#26593,.F.); +#26593 = EDGE_CURVE('',#26594,#26585,#26596,.T.); +#26594 = VERTEX_POINT('',#26595); +#26595 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#26596 = LINE('',#26597,#26598); +#26597 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#26598 = VECTOR('',#26599,1.); +#26599 = DIRECTION('',(1.,0.,0.)); +#26600 = ORIENTED_EDGE('',*,*,#26601,.F.); +#26601 = EDGE_CURVE('',#26602,#26594,#26604,.T.); +#26602 = VERTEX_POINT('',#26603); +#26603 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26604 = LINE('',#26605,#26606); +#26605 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26606 = VECTOR('',#26607,1.); +#26607 = DIRECTION('',(0.,0.,1.)); +#26608 = ORIENTED_EDGE('',*,*,#26609,.T.); +#26609 = EDGE_CURVE('',#26602,#26610,#26612,.T.); +#26610 = VERTEX_POINT('',#26611); +#26611 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02)); +#26612 = LINE('',#26613,#26614); +#26613 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26614 = VECTOR('',#26615,1.); +#26615 = DIRECTION('',(1.,0.,0.)); +#26616 = ORIENTED_EDGE('',*,*,#26617,.T.); +#26617 = EDGE_CURVE('',#26610,#26552,#26618,.T.); +#26618 = CIRCLE('',#26619,4.5E-02); +#26619 = AXIS2_PLACEMENT_3D('',#26620,#26621,#26622); +#26620 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02)); +#26621 = DIRECTION('',(0.,1.,0.)); +#26622 = DIRECTION('',(0.,-0.,1.)); +#26623 = PLANE('',#26624); +#26624 = AXIS2_PLACEMENT_3D('',#26625,#26626,#26627); +#26625 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#26626 = DIRECTION('',(0.,1.,0.)); +#26627 = DIRECTION('',(0.,-0.,1.)); +#26628 = ADVANCED_FACE('',(#26629),#26648,.T.); +#26629 = FACE_BOUND('',#26630,.T.); +#26630 = EDGE_LOOP('',(#26631,#26632,#26641,#26647)); +#26631 = ORIENTED_EDGE('',*,*,#26519,.T.); +#26632 = ORIENTED_EDGE('',*,*,#26633,.T.); +#26633 = EDGE_CURVE('',#26520,#26634,#26636,.T.); +#26634 = VERTEX_POINT('',#26635); +#26635 = CARTESIAN_POINT('',(-0.755,0.4,-2.775557561563E-17)); +#26636 = CIRCLE('',#26637,4.5E-02); +#26637 = AXIS2_PLACEMENT_3D('',#26638,#26639,#26640); +#26638 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#26639 = DIRECTION('',(0.,-1.,0.)); +#26640 = DIRECTION('',(0.,0.,1.)); +#26641 = ORIENTED_EDGE('',*,*,#26642,.F.); +#26642 = EDGE_CURVE('',#26550,#26634,#26643,.T.); +#26643 = LINE('',#26644,#26645); +#26644 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17)); +#26645 = VECTOR('',#26646,1.); +#26646 = DIRECTION('',(0.,1.,0.)); +#26647 = ORIENTED_EDGE('',*,*,#26559,.F.); +#26648 = CYLINDRICAL_SURFACE('',#26649,4.5E-02); +#26649 = AXIS2_PLACEMENT_3D('',#26650,#26651,#26652); +#26650 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26651 = DIRECTION('',(0.,1.,0.)); +#26652 = DIRECTION('',(-1.,0.,0.)); +#26653 = ADVANCED_FACE('',(#26654),#26673,.T.); +#26654 = FACE_BOUND('',#26655,.T.); +#26655 = EDGE_LOOP('',(#26656,#26657,#26665,#26672)); +#26656 = ORIENTED_EDGE('',*,*,#26567,.T.); +#26657 = ORIENTED_EDGE('',*,*,#26658,.T.); +#26658 = EDGE_CURVE('',#26568,#26659,#26661,.T.); +#26659 = VERTEX_POINT('',#26660); +#26660 = CARTESIAN_POINT('',(-0.755,0.4,0.45)); +#26661 = LINE('',#26662,#26663); +#26662 = CARTESIAN_POINT('',(-0.755,-0.4,0.45)); +#26663 = VECTOR('',#26664,1.); +#26664 = DIRECTION('',(0.,1.,0.)); +#26665 = ORIENTED_EDGE('',*,*,#26666,.F.); +#26666 = EDGE_CURVE('',#26528,#26659,#26667,.T.); +#26667 = CIRCLE('',#26668,4.5E-02); +#26668 = AXIS2_PLACEMENT_3D('',#26669,#26670,#26671); +#26669 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#26670 = DIRECTION('',(0.,1.,0.)); +#26671 = DIRECTION('',(0.,-0.,1.)); +#26672 = ORIENTED_EDGE('',*,*,#26535,.F.); +#26673 = CYLINDRICAL_SURFACE('',#26674,4.5E-02); +#26674 = AXIS2_PLACEMENT_3D('',#26675,#26676,#26677); +#26675 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#26676 = DIRECTION('',(0.,1.,0.)); +#26677 = DIRECTION('',(-1.,0.,0.)); +#26678 = ADVANCED_FACE('',(#26679),#26740,.T.); +#26679 = FACE_BOUND('',#26680,.T.); +#26680 = EDGE_LOOP('',(#26681,#26689,#26690,#26691,#26692,#26700,#26709, + #26717,#26725,#26733)); +#26681 = ORIENTED_EDGE('',*,*,#26682,.F.); +#26682 = EDGE_CURVE('',#26634,#26683,#26685,.T.); +#26683 = VERTEX_POINT('',#26684); +#26684 = CARTESIAN_POINT('',(-0.545,0.4,-2.775557561563E-17)); +#26685 = LINE('',#26686,#26687); +#26686 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#26687 = VECTOR('',#26688,1.); +#26688 = DIRECTION('',(1.,0.,0.)); +#26689 = ORIENTED_EDGE('',*,*,#26633,.F.); +#26690 = ORIENTED_EDGE('',*,*,#26527,.T.); +#26691 = ORIENTED_EDGE('',*,*,#26666,.T.); +#26692 = ORIENTED_EDGE('',*,*,#26693,.T.); +#26693 = EDGE_CURVE('',#26659,#26694,#26696,.T.); +#26694 = VERTEX_POINT('',#26695); +#26695 = CARTESIAN_POINT('',(-0.545,0.4,0.45)); +#26696 = LINE('',#26697,#26698); +#26697 = CARTESIAN_POINT('',(-0.8,0.4,0.45)); +#26698 = VECTOR('',#26699,1.); +#26699 = DIRECTION('',(1.,0.,0.)); +#26700 = ORIENTED_EDGE('',*,*,#26701,.F.); +#26701 = EDGE_CURVE('',#26702,#26694,#26704,.T.); +#26702 = VERTEX_POINT('',#26703); +#26703 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#26704 = CIRCLE('',#26705,4.5E-02); +#26705 = AXIS2_PLACEMENT_3D('',#26706,#26707,#26708); +#26706 = CARTESIAN_POINT('',(-0.545,0.4,0.405)); +#26707 = DIRECTION('',(0.,-1.,0.)); +#26708 = DIRECTION('',(0.,0.,1.)); +#26709 = ORIENTED_EDGE('',*,*,#26710,.F.); +#26710 = EDGE_CURVE('',#26711,#26702,#26713,.T.); +#26711 = VERTEX_POINT('',#26712); +#26712 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#26713 = LINE('',#26714,#26715); +#26714 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#26715 = VECTOR('',#26716,1.); +#26716 = DIRECTION('',(1.,0.,0.)); +#26717 = ORIENTED_EDGE('',*,*,#26718,.F.); +#26718 = EDGE_CURVE('',#26719,#26711,#26721,.T.); +#26719 = VERTEX_POINT('',#26720); +#26720 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#26721 = LINE('',#26722,#26723); +#26722 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#26723 = VECTOR('',#26724,1.); +#26724 = DIRECTION('',(0.,0.,1.)); +#26725 = ORIENTED_EDGE('',*,*,#26726,.T.); +#26726 = EDGE_CURVE('',#26719,#26727,#26729,.T.); +#26727 = VERTEX_POINT('',#26728); +#26728 = CARTESIAN_POINT('',(-0.5,0.4,4.5E-02)); +#26729 = LINE('',#26730,#26731); +#26730 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#26731 = VECTOR('',#26732,1.); +#26732 = DIRECTION('',(1.,0.,0.)); +#26733 = ORIENTED_EDGE('',*,*,#26734,.T.); +#26734 = EDGE_CURVE('',#26727,#26683,#26735,.T.); +#26735 = CIRCLE('',#26736,4.5E-02); +#26736 = AXIS2_PLACEMENT_3D('',#26737,#26738,#26739); +#26737 = CARTESIAN_POINT('',(-0.545,0.4,4.5E-02)); +#26738 = DIRECTION('',(0.,1.,0.)); +#26739 = DIRECTION('',(0.,-0.,1.)); +#26740 = PLANE('',#26741); +#26741 = AXIS2_PLACEMENT_3D('',#26742,#26743,#26744); +#26742 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#26743 = DIRECTION('',(0.,1.,0.)); +#26744 = DIRECTION('',(0.,-0.,1.)); +#26745 = ADVANCED_FACE('',(#26746),#26757,.F.); +#26746 = FACE_BOUND('',#26747,.F.); +#26747 = EDGE_LOOP('',(#26748,#26749,#26750,#26751)); +#26748 = ORIENTED_EDGE('',*,*,#26682,.F.); +#26749 = ORIENTED_EDGE('',*,*,#26642,.F.); +#26750 = ORIENTED_EDGE('',*,*,#26549,.T.); +#26751 = ORIENTED_EDGE('',*,*,#26752,.T.); +#26752 = EDGE_CURVE('',#26552,#26683,#26753,.T.); +#26753 = LINE('',#26754,#26755); +#26754 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17)); +#26755 = VECTOR('',#26756,1.); +#26756 = DIRECTION('',(0.,1.,0.)); +#26757 = PLANE('',#26758); +#26758 = AXIS2_PLACEMENT_3D('',#26759,#26760,#26761); +#26759 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#26760 = DIRECTION('',(0.,0.,1.)); +#26761 = DIRECTION('',(1.,0.,-0.)); +#26762 = ADVANCED_FACE('',(#26763),#26774,.T.); +#26763 = FACE_BOUND('',#26764,.T.); +#26764 = EDGE_LOOP('',(#26765,#26766,#26767,#26768)); +#26765 = ORIENTED_EDGE('',*,*,#26617,.T.); +#26766 = ORIENTED_EDGE('',*,*,#26752,.T.); +#26767 = ORIENTED_EDGE('',*,*,#26734,.F.); +#26768 = ORIENTED_EDGE('',*,*,#26769,.F.); +#26769 = EDGE_CURVE('',#26610,#26727,#26770,.T.); +#26770 = LINE('',#26771,#26772); +#26771 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02)); +#26772 = VECTOR('',#26773,1.); +#26773 = DIRECTION('',(0.,1.,0.)); +#26774 = CYLINDRICAL_SURFACE('',#26775,4.5E-02); +#26775 = AXIS2_PLACEMENT_3D('',#26776,#26777,#26778); +#26776 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02)); +#26777 = DIRECTION('',(0.,1.,0.)); +#26778 = DIRECTION('',(1.,0.,0.)); +#26779 = ADVANCED_FACE('',(#26780),#26823,.F.); +#26780 = FACE_BOUND('',#26781,.F.); +#26781 = EDGE_LOOP('',(#26782,#26783,#26784,#26785,#26793,#26801,#26809, + #26817)); +#26782 = ORIENTED_EDGE('',*,*,#26609,.F.); +#26783 = ORIENTED_EDGE('',*,*,#26601,.T.); +#26784 = ORIENTED_EDGE('',*,*,#26593,.T.); +#26785 = ORIENTED_EDGE('',*,*,#26786,.T.); +#26786 = EDGE_CURVE('',#26585,#26787,#26789,.T.); +#26787 = VERTEX_POINT('',#26788); +#26788 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#26789 = LINE('',#26790,#26791); +#26790 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#26791 = VECTOR('',#26792,1.); +#26792 = DIRECTION('',(1.,0.,0.)); +#26793 = ORIENTED_EDGE('',*,*,#26794,.T.); +#26794 = EDGE_CURVE('',#26787,#26795,#26797,.T.); +#26795 = VERTEX_POINT('',#26796); +#26796 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#26797 = LINE('',#26798,#26799); +#26798 = CARTESIAN_POINT('',(-0.755,-0.4,0.405)); +#26799 = VECTOR('',#26800,1.); +#26800 = DIRECTION('',(1.,0.,0.)); +#26801 = ORIENTED_EDGE('',*,*,#26802,.F.); +#26802 = EDGE_CURVE('',#26803,#26795,#26805,.T.); +#26803 = VERTEX_POINT('',#26804); +#26804 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#26805 = LINE('',#26806,#26807); +#26806 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#26807 = VECTOR('',#26808,1.); +#26808 = DIRECTION('',(0.,0.,1.)); +#26809 = ORIENTED_EDGE('',*,*,#26810,.F.); +#26810 = EDGE_CURVE('',#26811,#26803,#26813,.T.); +#26811 = VERTEX_POINT('',#26812); +#26812 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02)); +#26813 = LINE('',#26814,#26815); +#26814 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26815 = VECTOR('',#26816,1.); +#26816 = DIRECTION('',(1.,0.,0.)); +#26817 = ORIENTED_EDGE('',*,*,#26818,.F.); +#26818 = EDGE_CURVE('',#26610,#26811,#26819,.T.); +#26819 = LINE('',#26820,#26821); +#26820 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26821 = VECTOR('',#26822,1.); +#26822 = DIRECTION('',(1.,0.,0.)); +#26823 = PLANE('',#26824); +#26824 = AXIS2_PLACEMENT_3D('',#26825,#26826,#26827); +#26825 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26826 = DIRECTION('',(0.,1.,0.)); +#26827 = DIRECTION('',(0.,-0.,1.)); +#26828 = ADVANCED_FACE('',(#26829),#26840,.T.); +#26829 = FACE_BOUND('',#26830,.T.); +#26830 = EDGE_LOOP('',(#26831,#26832,#26833,#26834)); +#26831 = ORIENTED_EDGE('',*,*,#26693,.F.); +#26832 = ORIENTED_EDGE('',*,*,#26658,.F.); +#26833 = ORIENTED_EDGE('',*,*,#26576,.T.); +#26834 = ORIENTED_EDGE('',*,*,#26835,.T.); +#26835 = EDGE_CURVE('',#26577,#26694,#26836,.T.); +#26836 = LINE('',#26837,#26838); +#26837 = CARTESIAN_POINT('',(-0.545,-0.4,0.45)); +#26838 = VECTOR('',#26839,1.); +#26839 = DIRECTION('',(0.,1.,0.)); +#26840 = PLANE('',#26841); +#26841 = AXIS2_PLACEMENT_3D('',#26842,#26843,#26844); +#26842 = CARTESIAN_POINT('',(-0.8,-0.4,0.45)); +#26843 = DIRECTION('',(0.,0.,1.)); +#26844 = DIRECTION('',(1.,0.,-0.)); +#26845 = ADVANCED_FACE('',(#26846),#26857,.T.); +#26846 = FACE_BOUND('',#26847,.T.); +#26847 = EDGE_LOOP('',(#26848,#26854,#26855,#26856)); +#26848 = ORIENTED_EDGE('',*,*,#26849,.T.); +#26849 = EDGE_CURVE('',#26585,#26702,#26850,.T.); +#26850 = LINE('',#26851,#26852); +#26851 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#26852 = VECTOR('',#26853,1.); +#26853 = DIRECTION('',(0.,1.,0.)); +#26854 = ORIENTED_EDGE('',*,*,#26701,.T.); +#26855 = ORIENTED_EDGE('',*,*,#26835,.F.); +#26856 = ORIENTED_EDGE('',*,*,#26584,.F.); +#26857 = CYLINDRICAL_SURFACE('',#26858,4.5E-02); +#26858 = AXIS2_PLACEMENT_3D('',#26859,#26860,#26861); +#26859 = CARTESIAN_POINT('',(-0.545,-0.4,0.405)); +#26860 = DIRECTION('',(0.,1.,0.)); +#26861 = DIRECTION('',(1.,0.,0.)); +#26862 = ADVANCED_FACE('',(#26863),#26906,.T.); +#26863 = FACE_BOUND('',#26864,.T.); +#26864 = EDGE_LOOP('',(#26865,#26866,#26867,#26868,#26876,#26884,#26892, + #26900)); +#26865 = ORIENTED_EDGE('',*,*,#26726,.F.); +#26866 = ORIENTED_EDGE('',*,*,#26718,.T.); +#26867 = ORIENTED_EDGE('',*,*,#26710,.T.); +#26868 = ORIENTED_EDGE('',*,*,#26869,.T.); +#26869 = EDGE_CURVE('',#26702,#26870,#26872,.T.); +#26870 = VERTEX_POINT('',#26871); +#26871 = CARTESIAN_POINT('',(0.5,0.4,0.405)); +#26872 = LINE('',#26873,#26874); +#26873 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#26874 = VECTOR('',#26875,1.); +#26875 = DIRECTION('',(1.,0.,0.)); +#26876 = ORIENTED_EDGE('',*,*,#26877,.T.); +#26877 = EDGE_CURVE('',#26870,#26878,#26880,.T.); +#26878 = VERTEX_POINT('',#26879); +#26879 = CARTESIAN_POINT('',(0.755,0.4,0.405)); +#26880 = LINE('',#26881,#26882); +#26881 = CARTESIAN_POINT('',(-0.755,0.4,0.405)); +#26882 = VECTOR('',#26883,1.); +#26883 = DIRECTION('',(1.,0.,0.)); +#26884 = ORIENTED_EDGE('',*,*,#26885,.F.); +#26885 = EDGE_CURVE('',#26886,#26878,#26888,.T.); +#26886 = VERTEX_POINT('',#26887); +#26887 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#26888 = LINE('',#26889,#26890); +#26889 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#26890 = VECTOR('',#26891,1.); +#26891 = DIRECTION('',(0.,0.,1.)); +#26892 = ORIENTED_EDGE('',*,*,#26893,.F.); +#26893 = EDGE_CURVE('',#26894,#26886,#26896,.T.); +#26894 = VERTEX_POINT('',#26895); +#26895 = CARTESIAN_POINT('',(0.5,0.4,4.5E-02)); +#26896 = LINE('',#26897,#26898); +#26897 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#26898 = VECTOR('',#26899,1.); +#26899 = DIRECTION('',(1.,0.,0.)); +#26900 = ORIENTED_EDGE('',*,*,#26901,.F.); +#26901 = EDGE_CURVE('',#26727,#26894,#26902,.T.); +#26902 = LINE('',#26903,#26904); +#26903 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#26904 = VECTOR('',#26905,1.); +#26905 = DIRECTION('',(1.,0.,0.)); +#26906 = PLANE('',#26907); +#26907 = AXIS2_PLACEMENT_3D('',#26908,#26909,#26910); +#26908 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02)); +#26909 = DIRECTION('',(0.,1.,0.)); +#26910 = DIRECTION('',(0.,-0.,1.)); +#26911 = ADVANCED_FACE('',(#26912),#26923,.F.); +#26912 = FACE_BOUND('',#26913,.F.); +#26913 = EDGE_LOOP('',(#26914,#26915,#26916,#26922)); +#26914 = ORIENTED_EDGE('',*,*,#26769,.F.); +#26915 = ORIENTED_EDGE('',*,*,#26818,.T.); +#26916 = ORIENTED_EDGE('',*,*,#26917,.T.); +#26917 = EDGE_CURVE('',#26811,#26894,#26918,.T.); +#26918 = LINE('',#26919,#26920); +#26919 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02)); +#26920 = VECTOR('',#26921,1.); +#26921 = DIRECTION('',(0.,1.,0.)); +#26922 = ORIENTED_EDGE('',*,*,#26901,.F.); +#26923 = PLANE('',#26924); +#26924 = AXIS2_PLACEMENT_3D('',#26925,#26926,#26927); +#26925 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02)); +#26926 = DIRECTION('',(0.,0.,1.)); +#26927 = DIRECTION('',(1.,0.,-0.)); +#26928 = ADVANCED_FACE('',(#26929),#26992,.F.); +#26929 = FACE_BOUND('',#26930,.F.); +#26930 = EDGE_LOOP('',(#26931,#26941,#26948,#26949,#26950,#26951,#26960, + #26968,#26977,#26985)); +#26931 = ORIENTED_EDGE('',*,*,#26932,.F.); +#26932 = EDGE_CURVE('',#26933,#26935,#26937,.T.); +#26933 = VERTEX_POINT('',#26934); +#26934 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17)); +#26935 = VERTEX_POINT('',#26936); +#26936 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17)); +#26937 = LINE('',#26938,#26939); +#26938 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#26939 = VECTOR('',#26940,1.); +#26940 = DIRECTION('',(1.,0.,0.)); +#26941 = ORIENTED_EDGE('',*,*,#26942,.F.); +#26942 = EDGE_CURVE('',#26811,#26933,#26943,.T.); +#26943 = CIRCLE('',#26944,4.5E-02); +#26944 = AXIS2_PLACEMENT_3D('',#26945,#26946,#26947); +#26945 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02)); +#26946 = DIRECTION('',(0.,-1.,0.)); +#26947 = DIRECTION('',(0.,0.,1.)); +#26948 = ORIENTED_EDGE('',*,*,#26810,.T.); +#26949 = ORIENTED_EDGE('',*,*,#26802,.T.); +#26950 = ORIENTED_EDGE('',*,*,#26794,.F.); +#26951 = ORIENTED_EDGE('',*,*,#26952,.T.); +#26952 = EDGE_CURVE('',#26787,#26953,#26955,.T.); +#26953 = VERTEX_POINT('',#26954); +#26954 = CARTESIAN_POINT('',(0.545,-0.4,0.45)); +#26955 = CIRCLE('',#26956,4.5E-02); +#26956 = AXIS2_PLACEMENT_3D('',#26957,#26958,#26959); +#26957 = CARTESIAN_POINT('',(0.545,-0.4,0.405)); +#26958 = DIRECTION('',(0.,1.,0.)); +#26959 = DIRECTION('',(0.,-0.,1.)); +#26960 = ORIENTED_EDGE('',*,*,#26961,.T.); +#26961 = EDGE_CURVE('',#26953,#26962,#26964,.T.); +#26962 = VERTEX_POINT('',#26963); +#26963 = CARTESIAN_POINT('',(0.755,-0.4,0.45)); +#26964 = LINE('',#26965,#26966); +#26965 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#26966 = VECTOR('',#26967,1.); +#26967 = DIRECTION('',(1.,0.,0.)); +#26968 = ORIENTED_EDGE('',*,*,#26969,.F.); +#26969 = EDGE_CURVE('',#26970,#26962,#26972,.T.); +#26970 = VERTEX_POINT('',#26971); +#26971 = CARTESIAN_POINT('',(0.8,-0.4,0.405)); +#26972 = CIRCLE('',#26973,4.5E-02); +#26973 = AXIS2_PLACEMENT_3D('',#26974,#26975,#26976); +#26974 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#26975 = DIRECTION('',(0.,-1.,0.)); +#26976 = DIRECTION('',(0.,0.,1.)); +#26977 = ORIENTED_EDGE('',*,*,#26978,.F.); +#26978 = EDGE_CURVE('',#26979,#26970,#26981,.T.); +#26979 = VERTEX_POINT('',#26980); +#26980 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02)); +#26981 = LINE('',#26982,#26983); +#26982 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#26983 = VECTOR('',#26984,1.); +#26984 = DIRECTION('',(0.,0.,1.)); +#26985 = ORIENTED_EDGE('',*,*,#26986,.T.); +#26986 = EDGE_CURVE('',#26979,#26935,#26987,.T.); +#26987 = CIRCLE('',#26988,4.5E-02); +#26988 = AXIS2_PLACEMENT_3D('',#26989,#26990,#26991); +#26989 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#26990 = DIRECTION('',(0.,1.,0.)); +#26991 = DIRECTION('',(0.,-0.,1.)); +#26992 = PLANE('',#26993); +#26993 = AXIS2_PLACEMENT_3D('',#26994,#26995,#26996); +#26994 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#26995 = DIRECTION('',(0.,1.,0.)); +#26996 = DIRECTION('',(0.,-0.,1.)); +#26997 = ADVANCED_FACE('',(#26998),#27023,.F.); +#26998 = FACE_BOUND('',#26999,.F.); +#26999 = EDGE_LOOP('',(#27000,#27001,#27009,#27017)); +#27000 = ORIENTED_EDGE('',*,*,#26786,.F.); +#27001 = ORIENTED_EDGE('',*,*,#27002,.T.); +#27002 = EDGE_CURVE('',#26585,#27003,#27005,.T.); +#27003 = VERTEX_POINT('',#27004); +#27004 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#27005 = LINE('',#27006,#27007); +#27006 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#27007 = VECTOR('',#27008,1.); +#27008 = DIRECTION('',(0.,0.,1.)); +#27009 = ORIENTED_EDGE('',*,*,#27010,.T.); +#27010 = EDGE_CURVE('',#27003,#27011,#27013,.T.); +#27011 = VERTEX_POINT('',#27012); +#27012 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#27013 = LINE('',#27014,#27015); +#27014 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#27015 = VECTOR('',#27016,1.); +#27016 = DIRECTION('',(1.,0.,0.)); +#27017 = ORIENTED_EDGE('',*,*,#27018,.F.); +#27018 = EDGE_CURVE('',#26787,#27011,#27019,.T.); +#27019 = LINE('',#27020,#27021); +#27020 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#27021 = VECTOR('',#27022,1.); +#27022 = DIRECTION('',(0.,0.,1.)); +#27023 = PLANE('',#27024); +#27024 = AXIS2_PLACEMENT_3D('',#27025,#27026,#27027); +#27025 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#27026 = DIRECTION('',(0.,1.,0.)); +#27027 = DIRECTION('',(0.,-0.,1.)); +#27028 = ADVANCED_FACE('',(#27029),#27047,.F.); +#27029 = FACE_BOUND('',#27030,.F.); +#27030 = EDGE_LOOP('',(#27031,#27032,#27033,#27041)); +#27031 = ORIENTED_EDGE('',*,*,#27002,.F.); +#27032 = ORIENTED_EDGE('',*,*,#26849,.T.); +#27033 = ORIENTED_EDGE('',*,*,#27034,.T.); +#27034 = EDGE_CURVE('',#26702,#27035,#27037,.T.); +#27035 = VERTEX_POINT('',#27036); +#27036 = CARTESIAN_POINT('',(-0.5,0.4,0.45)); +#27037 = LINE('',#27038,#27039); +#27038 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#27039 = VECTOR('',#27040,1.); +#27040 = DIRECTION('',(0.,0.,1.)); +#27041 = ORIENTED_EDGE('',*,*,#27042,.F.); +#27042 = EDGE_CURVE('',#27003,#27035,#27043,.T.); +#27043 = LINE('',#27044,#27045); +#27044 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#27045 = VECTOR('',#27046,1.); +#27046 = DIRECTION('',(0.,1.,0.)); +#27047 = PLANE('',#27048); +#27048 = AXIS2_PLACEMENT_3D('',#27049,#27050,#27051); +#27049 = CARTESIAN_POINT('',(-0.5,-0.4,0.405)); +#27050 = DIRECTION('',(1.,0.,0.)); +#27051 = DIRECTION('',(0.,0.,1.)); +#27052 = ADVANCED_FACE('',(#27053),#27116,.T.); +#27053 = FACE_BOUND('',#27054,.T.); +#27054 = EDGE_LOOP('',(#27055,#27065,#27072,#27073,#27074,#27075,#27084, + #27092,#27101,#27109)); +#27055 = ORIENTED_EDGE('',*,*,#27056,.F.); +#27056 = EDGE_CURVE('',#27057,#27059,#27061,.T.); +#27057 = VERTEX_POINT('',#27058); +#27058 = CARTESIAN_POINT('',(0.545,0.4,-2.775557561563E-17)); +#27059 = VERTEX_POINT('',#27060); +#27060 = CARTESIAN_POINT('',(0.755,0.4,-2.775557561563E-17)); +#27061 = LINE('',#27062,#27063); +#27062 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#27063 = VECTOR('',#27064,1.); +#27064 = DIRECTION('',(1.,0.,0.)); +#27065 = ORIENTED_EDGE('',*,*,#27066,.F.); +#27066 = EDGE_CURVE('',#26894,#27057,#27067,.T.); +#27067 = CIRCLE('',#27068,4.5E-02); +#27068 = AXIS2_PLACEMENT_3D('',#27069,#27070,#27071); +#27069 = CARTESIAN_POINT('',(0.545,0.4,4.5E-02)); +#27070 = DIRECTION('',(0.,-1.,0.)); +#27071 = DIRECTION('',(0.,0.,1.)); +#27072 = ORIENTED_EDGE('',*,*,#26893,.T.); +#27073 = ORIENTED_EDGE('',*,*,#26885,.T.); +#27074 = ORIENTED_EDGE('',*,*,#26877,.F.); +#27075 = ORIENTED_EDGE('',*,*,#27076,.T.); +#27076 = EDGE_CURVE('',#26870,#27077,#27079,.T.); +#27077 = VERTEX_POINT('',#27078); +#27078 = CARTESIAN_POINT('',(0.545,0.4,0.45)); +#27079 = CIRCLE('',#27080,4.5E-02); +#27080 = AXIS2_PLACEMENT_3D('',#27081,#27082,#27083); +#27081 = CARTESIAN_POINT('',(0.545,0.4,0.405)); +#27082 = DIRECTION('',(0.,1.,0.)); +#27083 = DIRECTION('',(0.,-0.,1.)); +#27084 = ORIENTED_EDGE('',*,*,#27085,.T.); +#27085 = EDGE_CURVE('',#27077,#27086,#27088,.T.); +#27086 = VERTEX_POINT('',#27087); +#27087 = CARTESIAN_POINT('',(0.755,0.4,0.45)); +#27088 = LINE('',#27089,#27090); +#27089 = CARTESIAN_POINT('',(0.5,0.4,0.45)); +#27090 = VECTOR('',#27091,1.); +#27091 = DIRECTION('',(1.,0.,0.)); +#27092 = ORIENTED_EDGE('',*,*,#27093,.F.); +#27093 = EDGE_CURVE('',#27094,#27086,#27096,.T.); +#27094 = VERTEX_POINT('',#27095); +#27095 = CARTESIAN_POINT('',(0.8,0.4,0.405)); +#27096 = CIRCLE('',#27097,4.5E-02); +#27097 = AXIS2_PLACEMENT_3D('',#27098,#27099,#27100); +#27098 = CARTESIAN_POINT('',(0.755,0.4,0.405)); +#27099 = DIRECTION('',(0.,-1.,0.)); +#27100 = DIRECTION('',(0.,0.,1.)); +#27101 = ORIENTED_EDGE('',*,*,#27102,.F.); +#27102 = EDGE_CURVE('',#27103,#27094,#27105,.T.); +#27103 = VERTEX_POINT('',#27104); +#27104 = CARTESIAN_POINT('',(0.8,0.4,4.5E-02)); +#27105 = LINE('',#27106,#27107); +#27106 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#27107 = VECTOR('',#27108,1.); +#27108 = DIRECTION('',(0.,0.,1.)); +#27109 = ORIENTED_EDGE('',*,*,#27110,.T.); +#27110 = EDGE_CURVE('',#27103,#27059,#27111,.T.); +#27111 = CIRCLE('',#27112,4.5E-02); +#27112 = AXIS2_PLACEMENT_3D('',#27113,#27114,#27115); +#27113 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02)); +#27114 = DIRECTION('',(0.,1.,0.)); +#27115 = DIRECTION('',(0.,-0.,1.)); +#27116 = PLANE('',#27117); +#27117 = AXIS2_PLACEMENT_3D('',#27118,#27119,#27120); +#27118 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#27119 = DIRECTION('',(0.,1.,0.)); +#27120 = DIRECTION('',(0.,-0.,1.)); +#27121 = ADVANCED_FACE('',(#27122),#27140,.T.); +#27122 = FACE_BOUND('',#27123,.T.); +#27123 = EDGE_LOOP('',(#27124,#27125,#27126,#27134)); +#27124 = ORIENTED_EDGE('',*,*,#26869,.F.); +#27125 = ORIENTED_EDGE('',*,*,#27034,.T.); +#27126 = ORIENTED_EDGE('',*,*,#27127,.T.); +#27127 = EDGE_CURVE('',#27035,#27128,#27130,.T.); +#27128 = VERTEX_POINT('',#27129); +#27129 = CARTESIAN_POINT('',(0.5,0.4,0.45)); +#27130 = LINE('',#27131,#27132); +#27131 = CARTESIAN_POINT('',(-0.5,0.4,0.45)); +#27132 = VECTOR('',#27133,1.); +#27133 = DIRECTION('',(1.,0.,0.)); +#27134 = ORIENTED_EDGE('',*,*,#27135,.F.); +#27135 = EDGE_CURVE('',#26870,#27128,#27136,.T.); +#27136 = LINE('',#27137,#27138); +#27137 = CARTESIAN_POINT('',(0.5,0.4,0.405)); +#27138 = VECTOR('',#27139,1.); +#27139 = DIRECTION('',(0.,0.,1.)); +#27140 = PLANE('',#27141); +#27141 = AXIS2_PLACEMENT_3D('',#27142,#27143,#27144); +#27142 = CARTESIAN_POINT('',(-0.5,0.4,0.405)); +#27143 = DIRECTION('',(0.,1.,0.)); +#27144 = DIRECTION('',(0.,-0.,1.)); +#27145 = ADVANCED_FACE('',(#27146),#27157,.T.); +#27146 = FACE_BOUND('',#27147,.T.); +#27147 = EDGE_LOOP('',(#27148,#27149,#27150,#27156)); +#27148 = ORIENTED_EDGE('',*,*,#26917,.T.); +#27149 = ORIENTED_EDGE('',*,*,#27066,.T.); +#27150 = ORIENTED_EDGE('',*,*,#27151,.F.); +#27151 = EDGE_CURVE('',#26933,#27057,#27152,.T.); +#27152 = LINE('',#27153,#27154); +#27153 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17)); +#27154 = VECTOR('',#27155,1.); +#27155 = DIRECTION('',(0.,1.,0.)); +#27156 = ORIENTED_EDGE('',*,*,#26942,.F.); +#27157 = CYLINDRICAL_SURFACE('',#27158,4.5E-02); +#27158 = AXIS2_PLACEMENT_3D('',#27159,#27160,#27161); +#27159 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02)); +#27160 = DIRECTION('',(0.,1.,0.)); +#27161 = DIRECTION('',(-1.,0.,0.)); +#27162 = ADVANCED_FACE('',(#27163),#27174,.F.); +#27163 = FACE_BOUND('',#27164,.F.); +#27164 = EDGE_LOOP('',(#27165,#27166,#27167,#27168)); +#27165 = ORIENTED_EDGE('',*,*,#27056,.F.); +#27166 = ORIENTED_EDGE('',*,*,#27151,.F.); +#27167 = ORIENTED_EDGE('',*,*,#26932,.T.); +#27168 = ORIENTED_EDGE('',*,*,#27169,.T.); +#27169 = EDGE_CURVE('',#26935,#27059,#27170,.T.); +#27170 = LINE('',#27171,#27172); +#27171 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17)); +#27172 = VECTOR('',#27173,1.); +#27173 = DIRECTION('',(0.,1.,0.)); +#27174 = PLANE('',#27175); +#27175 = AXIS2_PLACEMENT_3D('',#27176,#27177,#27178); +#27176 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#27177 = DIRECTION('',(0.,0.,1.)); +#27178 = DIRECTION('',(1.,0.,-0.)); +#27179 = ADVANCED_FACE('',(#27180),#27191,.T.); +#27180 = FACE_BOUND('',#27181,.T.); +#27181 = EDGE_LOOP('',(#27182,#27183,#27184,#27185)); +#27182 = ORIENTED_EDGE('',*,*,#26986,.T.); +#27183 = ORIENTED_EDGE('',*,*,#27169,.T.); +#27184 = ORIENTED_EDGE('',*,*,#27110,.F.); +#27185 = ORIENTED_EDGE('',*,*,#27186,.F.); +#27186 = EDGE_CURVE('',#26979,#27103,#27187,.T.); +#27187 = LINE('',#27188,#27189); +#27188 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02)); +#27189 = VECTOR('',#27190,1.); +#27190 = DIRECTION('',(0.,1.,0.)); +#27191 = CYLINDRICAL_SURFACE('',#27192,4.5E-02); +#27192 = AXIS2_PLACEMENT_3D('',#27193,#27194,#27195); +#27193 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02)); +#27194 = DIRECTION('',(0.,1.,0.)); +#27195 = DIRECTION('',(1.,0.,0.)); +#27196 = ADVANCED_FACE('',(#27197),#27208,.T.); +#27197 = FACE_BOUND('',#27198,.T.); +#27198 = EDGE_LOOP('',(#27199,#27200,#27201,#27202)); +#27199 = ORIENTED_EDGE('',*,*,#26978,.F.); +#27200 = ORIENTED_EDGE('',*,*,#27186,.T.); +#27201 = ORIENTED_EDGE('',*,*,#27102,.T.); +#27202 = ORIENTED_EDGE('',*,*,#27203,.F.); +#27203 = EDGE_CURVE('',#26970,#27094,#27204,.T.); +#27204 = LINE('',#27205,#27206); +#27205 = CARTESIAN_POINT('',(0.8,-0.4,0.405)); +#27206 = VECTOR('',#27207,1.); +#27207 = DIRECTION('',(0.,1.,0.)); +#27208 = PLANE('',#27209); +#27209 = AXIS2_PLACEMENT_3D('',#27210,#27211,#27212); +#27210 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#27211 = DIRECTION('',(1.,0.,0.)); +#27212 = DIRECTION('',(0.,0.,1.)); +#27213 = ADVANCED_FACE('',(#27214),#27225,.T.); +#27214 = FACE_BOUND('',#27215,.T.); +#27215 = EDGE_LOOP('',(#27216,#27217,#27218,#27224)); +#27216 = ORIENTED_EDGE('',*,*,#27203,.T.); +#27217 = ORIENTED_EDGE('',*,*,#27093,.T.); +#27218 = ORIENTED_EDGE('',*,*,#27219,.F.); +#27219 = EDGE_CURVE('',#26962,#27086,#27220,.T.); +#27220 = LINE('',#27221,#27222); +#27221 = CARTESIAN_POINT('',(0.755,-0.4,0.45)); +#27222 = VECTOR('',#27223,1.); +#27223 = DIRECTION('',(0.,1.,0.)); +#27224 = ORIENTED_EDGE('',*,*,#26969,.F.); +#27225 = CYLINDRICAL_SURFACE('',#27226,4.5E-02); +#27226 = AXIS2_PLACEMENT_3D('',#27227,#27228,#27229); +#27227 = CARTESIAN_POINT('',(0.755,-0.4,0.405)); +#27228 = DIRECTION('',(0.,1.,0.)); +#27229 = DIRECTION('',(1.,0.,0.)); +#27230 = ADVANCED_FACE('',(#27231),#27242,.T.); +#27231 = FACE_BOUND('',#27232,.T.); +#27232 = EDGE_LOOP('',(#27233,#27234,#27240,#27241)); +#27233 = ORIENTED_EDGE('',*,*,#27085,.F.); +#27234 = ORIENTED_EDGE('',*,*,#27235,.F.); +#27235 = EDGE_CURVE('',#26953,#27077,#27236,.T.); +#27236 = LINE('',#27237,#27238); +#27237 = CARTESIAN_POINT('',(0.545,-0.4,0.45)); +#27238 = VECTOR('',#27239,1.); +#27239 = DIRECTION('',(0.,1.,0.)); +#27240 = ORIENTED_EDGE('',*,*,#26961,.T.); +#27241 = ORIENTED_EDGE('',*,*,#27219,.T.); +#27242 = PLANE('',#27243); +#27243 = AXIS2_PLACEMENT_3D('',#27244,#27245,#27246); +#27244 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#27245 = DIRECTION('',(0.,0.,1.)); +#27246 = DIRECTION('',(1.,0.,-0.)); +#27247 = ADVANCED_FACE('',(#27248),#27259,.T.); +#27248 = FACE_BOUND('',#27249,.T.); +#27249 = EDGE_LOOP('',(#27250,#27251,#27252,#27253)); +#27250 = ORIENTED_EDGE('',*,*,#26952,.T.); +#27251 = ORIENTED_EDGE('',*,*,#27235,.T.); +#27252 = ORIENTED_EDGE('',*,*,#27076,.F.); +#27253 = ORIENTED_EDGE('',*,*,#27254,.F.); +#27254 = EDGE_CURVE('',#26787,#26870,#27255,.T.); +#27255 = LINE('',#27256,#27257); +#27256 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#27257 = VECTOR('',#27258,1.); +#27258 = DIRECTION('',(0.,1.,0.)); +#27259 = CYLINDRICAL_SURFACE('',#27260,4.5E-02); +#27260 = AXIS2_PLACEMENT_3D('',#27261,#27262,#27263); +#27261 = CARTESIAN_POINT('',(0.545,-0.4,0.405)); +#27262 = DIRECTION('',(0.,1.,0.)); +#27263 = DIRECTION('',(-1.,0.,0.)); +#27264 = ADVANCED_FACE('',(#27265),#27276,.T.); +#27265 = FACE_BOUND('',#27266,.T.); +#27266 = EDGE_LOOP('',(#27267,#27268,#27269,#27270)); +#27267 = ORIENTED_EDGE('',*,*,#27018,.F.); +#27268 = ORIENTED_EDGE('',*,*,#27254,.T.); +#27269 = ORIENTED_EDGE('',*,*,#27135,.T.); +#27270 = ORIENTED_EDGE('',*,*,#27271,.F.); +#27271 = EDGE_CURVE('',#27011,#27128,#27272,.T.); +#27272 = LINE('',#27273,#27274); +#27273 = CARTESIAN_POINT('',(0.5,-0.4,0.45)); +#27274 = VECTOR('',#27275,1.); +#27275 = DIRECTION('',(0.,1.,0.)); +#27276 = PLANE('',#27277); +#27277 = AXIS2_PLACEMENT_3D('',#27278,#27279,#27280); +#27278 = CARTESIAN_POINT('',(0.5,-0.4,0.405)); +#27279 = DIRECTION('',(1.,0.,0.)); +#27280 = DIRECTION('',(0.,0.,1.)); +#27281 = ADVANCED_FACE('',(#27282),#27288,.T.); +#27282 = FACE_BOUND('',#27283,.T.); +#27283 = EDGE_LOOP('',(#27284,#27285,#27286,#27287)); +#27284 = ORIENTED_EDGE('',*,*,#27042,.F.); +#27285 = ORIENTED_EDGE('',*,*,#27010,.T.); +#27286 = ORIENTED_EDGE('',*,*,#27271,.T.); +#27287 = ORIENTED_EDGE('',*,*,#27127,.F.); +#27288 = PLANE('',#27289); +#27289 = AXIS2_PLACEMENT_3D('',#27290,#27291,#27292); +#27290 = CARTESIAN_POINT('',(-0.5,-0.4,0.45)); +#27291 = DIRECTION('',(0.,0.,1.)); +#27292 = DIRECTION('',(1.,0.,-0.)); +#27293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27297)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#27294,#27295,#27296)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#27294 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#27295 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#27296 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#27297 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#27294, + 'distance_accuracy_value','confusion accuracy'); +#27298 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27299,#27301); +#27299 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27300) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27300 = ITEM_DEFINED_TRANSFORMATION('','',#11,#143); +#27301 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27302); +#27302 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('33','R1','',#5,#26497,$); +#27303 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#26499)); +#27304 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27305,#27307); +#27305 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27306) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27306 = ITEM_DEFINED_TRANSFORMATION('','',#11,#147); +#27307 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27308); +#27308 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('34','R10','',#5,#26497,$); +#27309 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27310,#27312); +#27310 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27311) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27311 = ITEM_DEFINED_TRANSFORMATION('','',#11,#151); +#27312 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27313); +#27313 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('35','R11','',#5,#26497,$); +#27314 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27315,#27317); +#27315 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27316) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27316 = ITEM_DEFINED_TRANSFORMATION('','',#11,#155); +#27317 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27318); +#27318 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('36','R12','',#5,#26497,$); +#27319 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27320,#27322); +#27320 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27321) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27321 = ITEM_DEFINED_TRANSFORMATION('','',#11,#159); +#27322 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27323); +#27323 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('37','R13','',#5,#26497,$); +#27324 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27325,#27327); +#27325 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27326) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27326 = ITEM_DEFINED_TRANSFORMATION('','',#11,#163); +#27327 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27328); +#27328 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('38','R14','',#5,#26497,$); +#27329 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27330,#27332); +#27330 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27331) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27331 = ITEM_DEFINED_TRANSFORMATION('','',#11,#167); +#27332 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27333); +#27333 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('39','R15','',#5,#26497,$); +#27334 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27335,#27337); +#27335 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27336) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27336 = ITEM_DEFINED_TRANSFORMATION('','',#11,#171); +#27337 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27338); +#27338 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('40','R2','',#5,#26497,$); +#27339 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27340,#27342); +#27340 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27341) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27341 = ITEM_DEFINED_TRANSFORMATION('','',#11,#175); +#27342 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27343); +#27343 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('41','R3','',#5,#26497,$); +#27344 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27345,#27347); +#27345 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27346) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27346 = ITEM_DEFINED_TRANSFORMATION('','',#11,#179); +#27347 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27348); +#27348 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('42','R4','',#5,#26497,$); +#27349 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27350,#27352); +#27350 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27351) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27351 = ITEM_DEFINED_TRANSFORMATION('','',#11,#183); +#27352 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27353); +#27353 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('43','R5','',#5,#26497,$); +#27354 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27355,#27357); +#27355 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27356) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27356 = ITEM_DEFINED_TRANSFORMATION('','',#11,#187); +#27357 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27358); +#27358 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('44','R6','',#5,#26497,$); +#27359 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27360,#27362); +#27360 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27361) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27361 = ITEM_DEFINED_TRANSFORMATION('','',#11,#191); +#27362 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27363); +#27363 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('45','R8','',#5,#26497,$); +#27364 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#27365,#27367); +#27365 = ( REPRESENTATION_RELATIONSHIP('','',#26502,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#27366) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#27366 = ITEM_DEFINED_TRANSFORMATION('','',#11,#195); +#27367 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #27368); +#27368 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('46','R9','',#5,#26497,$); +#27369 = SHAPE_DEFINITION_REPRESENTATION(#27370,#27376); +#27370 = PRODUCT_DEFINITION_SHAPE('','',#27371); +#27371 = PRODUCT_DEFINITION('design','',#27372,#27375); +#27372 = PRODUCT_DEFINITION_FORMATION('','',#27373); +#27373 = PRODUCT('SW_SPST_B3U-1000P','SW_SPST_B3U-1000P','',(#27374)); +#27374 = PRODUCT_CONTEXT('',#2,'mechanical'); +#27375 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#27376 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#27377),#30011); +#27377 = MANIFOLD_SOLID_BREP('',#27378); +#27378 = CLOSED_SHELL('',(#27379,#27483,#27633,#27673,#27697,#27730, + #27857,#27881,#27913,#27953,#27985,#28009,#28129,#28162,#28195, + #28228,#28300,#28340,#28380,#28413,#28444,#28493,#28517,#28541, + #28565,#28582,#28606,#28637,#28668,#28700,#28730,#28761,#28791, + #28816,#28840,#28857,#28901,#28959,#28982,#29006,#29030,#29047, + #29064,#29088,#29125,#29156,#29174,#29206,#29230,#29254,#29285, + #29297,#29324,#29336,#29353,#29371,#29404,#29422,#29464,#29481, + #29527,#29539,#29576,#29593,#29610,#29670,#29682,#29694,#29722, + #29734,#29746,#29771,#29817,#29849,#29873,#29898,#29916,#29941, + #29966,#29983,#30001)); +#27379 = ADVANCED_FACE('',(#27380),#27478,.F.); +#27380 = FACE_BOUND('',#27381,.F.); +#27381 = EDGE_LOOP('',(#27382,#27392,#27400,#27408,#27416,#27424,#27432, + #27440,#27448,#27456,#27464,#27472)); +#27382 = ORIENTED_EDGE('',*,*,#27383,.F.); +#27383 = EDGE_CURVE('',#27384,#27386,#27388,.T.); +#27384 = VERTEX_POINT('',#27385); +#27385 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#27386 = VERTEX_POINT('',#27387); +#27387 = CARTESIAN_POINT('',(-0.925,-1.05,0.)); +#27388 = LINE('',#27389,#27390); +#27389 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#27390 = VECTOR('',#27391,1.); +#27391 = DIRECTION('',(1.,0.,0.)); +#27392 = ORIENTED_EDGE('',*,*,#27393,.T.); +#27393 = EDGE_CURVE('',#27384,#27394,#27396,.T.); +#27394 = VERTEX_POINT('',#27395); +#27395 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#27396 = LINE('',#27397,#27398); +#27397 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#27398 = VECTOR('',#27399,1.); +#27399 = DIRECTION('',(0.,0.,1.)); +#27400 = ORIENTED_EDGE('',*,*,#27401,.T.); +#27401 = EDGE_CURVE('',#27394,#27402,#27404,.T.); +#27402 = VERTEX_POINT('',#27403); +#27403 = CARTESIAN_POINT('',(-1.225,-1.05,0.6)); +#27404 = LINE('',#27405,#27406); +#27405 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#27406 = VECTOR('',#27407,1.); +#27407 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27408 = ORIENTED_EDGE('',*,*,#27409,.F.); +#27409 = EDGE_CURVE('',#27410,#27402,#27412,.T.); +#27410 = VERTEX_POINT('',#27411); +#27411 = CARTESIAN_POINT('',(-1.225,-1.05,1.08)); +#27412 = LINE('',#27413,#27414); +#27413 = CARTESIAN_POINT('',(-1.225,-1.05,1.08)); +#27414 = VECTOR('',#27415,1.); +#27415 = DIRECTION('',(0.,0.,-1.)); +#27416 = ORIENTED_EDGE('',*,*,#27417,.T.); +#27417 = EDGE_CURVE('',#27410,#27418,#27420,.T.); +#27418 = VERTEX_POINT('',#27419); +#27419 = CARTESIAN_POINT('',(1.225,-1.05,1.08)); +#27420 = LINE('',#27421,#27422); +#27421 = CARTESIAN_POINT('',(-1.5,-1.05,1.08)); +#27422 = VECTOR('',#27423,1.); +#27423 = DIRECTION('',(1.,0.,0.)); +#27424 = ORIENTED_EDGE('',*,*,#27425,.T.); +#27425 = EDGE_CURVE('',#27418,#27426,#27428,.T.); +#27426 = VERTEX_POINT('',#27427); +#27427 = CARTESIAN_POINT('',(1.225,-1.05,0.6)); +#27428 = LINE('',#27429,#27430); +#27429 = CARTESIAN_POINT('',(1.225,-1.05,1.08)); +#27430 = VECTOR('',#27431,1.); +#27431 = DIRECTION('',(0.,0.,-1.)); +#27432 = ORIENTED_EDGE('',*,*,#27433,.F.); +#27433 = EDGE_CURVE('',#27434,#27426,#27436,.T.); +#27434 = VERTEX_POINT('',#27435); +#27435 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#27436 = LINE('',#27437,#27438); +#27437 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#27438 = VECTOR('',#27439,1.); +#27439 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#27440 = ORIENTED_EDGE('',*,*,#27441,.F.); +#27441 = EDGE_CURVE('',#27442,#27434,#27444,.T.); +#27442 = VERTEX_POINT('',#27443); +#27443 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#27444 = LINE('',#27445,#27446); +#27445 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#27446 = VECTOR('',#27447,1.); +#27447 = DIRECTION('',(0.,0.,1.)); +#27448 = ORIENTED_EDGE('',*,*,#27449,.F.); +#27449 = EDGE_CURVE('',#27450,#27442,#27452,.T.); +#27450 = VERTEX_POINT('',#27451); +#27451 = CARTESIAN_POINT('',(0.925,-1.05,0.)); +#27452 = LINE('',#27453,#27454); +#27453 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#27454 = VECTOR('',#27455,1.); +#27455 = DIRECTION('',(1.,0.,0.)); +#27456 = ORIENTED_EDGE('',*,*,#27457,.T.); +#27457 = EDGE_CURVE('',#27450,#27458,#27460,.T.); +#27458 = VERTEX_POINT('',#27459); +#27459 = CARTESIAN_POINT('',(0.925,-1.05,0.6)); +#27460 = LINE('',#27461,#27462); +#27461 = CARTESIAN_POINT('',(0.925,-1.05,0.)); +#27462 = VECTOR('',#27463,1.); +#27463 = DIRECTION('',(0.,0.,1.)); +#27464 = ORIENTED_EDGE('',*,*,#27465,.F.); +#27465 = EDGE_CURVE('',#27466,#27458,#27468,.T.); +#27466 = VERTEX_POINT('',#27467); +#27467 = CARTESIAN_POINT('',(-0.925,-1.05,0.6)); +#27468 = LINE('',#27469,#27470); +#27469 = CARTESIAN_POINT('',(-0.925,-1.05,0.6)); +#27470 = VECTOR('',#27471,1.); +#27471 = DIRECTION('',(1.,0.,0.)); +#27472 = ORIENTED_EDGE('',*,*,#27473,.F.); +#27473 = EDGE_CURVE('',#27386,#27466,#27474,.T.); +#27474 = LINE('',#27475,#27476); +#27475 = CARTESIAN_POINT('',(-0.925,-1.05,0.)); +#27476 = VECTOR('',#27477,1.); +#27477 = DIRECTION('',(0.,0.,1.)); +#27478 = PLANE('',#27479); +#27479 = AXIS2_PLACEMENT_3D('',#27480,#27481,#27482); +#27480 = CARTESIAN_POINT('',(-1.5,-1.05,0.)); +#27481 = DIRECTION('',(0.,1.,0.)); +#27482 = DIRECTION('',(1.,0.,0.)); +#27483 = ADVANCED_FACE('',(#27484),#27628,.F.); +#27484 = FACE_BOUND('',#27485,.F.); +#27485 = EDGE_LOOP('',(#27486,#27496,#27502,#27503,#27511,#27519,#27525, + #27526,#27534,#27542,#27550,#27558,#27566,#27574,#27582,#27590, + #27598,#27606,#27614,#27622)); +#27486 = ORIENTED_EDGE('',*,*,#27487,.F.); +#27487 = EDGE_CURVE('',#27488,#27490,#27492,.T.); +#27488 = VERTEX_POINT('',#27489); +#27489 = CARTESIAN_POINT('',(-1.5,-0.7,0.)); +#27490 = VERTEX_POINT('',#27491); +#27491 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#27492 = LINE('',#27493,#27494); +#27493 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#27494 = VECTOR('',#27495,1.); +#27495 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#27496 = ORIENTED_EDGE('',*,*,#27497,.T.); +#27497 = EDGE_CURVE('',#27488,#27384,#27498,.T.); +#27498 = LINE('',#27499,#27500); +#27499 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#27500 = VECTOR('',#27501,1.); +#27501 = DIRECTION('',(0.,-1.,0.)); +#27502 = ORIENTED_EDGE('',*,*,#27383,.T.); +#27503 = ORIENTED_EDGE('',*,*,#27504,.F.); +#27504 = EDGE_CURVE('',#27505,#27386,#27507,.T.); +#27505 = VERTEX_POINT('',#27506); +#27506 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#27507 = LINE('',#27508,#27509); +#27508 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#27509 = VECTOR('',#27510,1.); +#27510 = DIRECTION('',(0.,1.,0.)); +#27511 = ORIENTED_EDGE('',*,*,#27512,.T.); +#27512 = EDGE_CURVE('',#27505,#27513,#27515,.T.); +#27513 = VERTEX_POINT('',#27514); +#27514 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#27515 = LINE('',#27516,#27517); +#27516 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#27517 = VECTOR('',#27518,1.); +#27518 = DIRECTION('',(1.,0.,0.)); +#27519 = ORIENTED_EDGE('',*,*,#27520,.T.); +#27520 = EDGE_CURVE('',#27513,#27450,#27521,.T.); +#27521 = LINE('',#27522,#27523); +#27522 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#27523 = VECTOR('',#27524,1.); +#27524 = DIRECTION('',(0.,1.,0.)); +#27525 = ORIENTED_EDGE('',*,*,#27449,.T.); +#27526 = ORIENTED_EDGE('',*,*,#27527,.T.); +#27527 = EDGE_CURVE('',#27442,#27528,#27530,.T.); +#27528 = VERTEX_POINT('',#27529); +#27529 = CARTESIAN_POINT('',(1.5,-0.7,0.)); +#27530 = LINE('',#27531,#27532); +#27531 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#27532 = VECTOR('',#27533,1.); +#27533 = DIRECTION('',(0.,1.,0.)); +#27534 = ORIENTED_EDGE('',*,*,#27535,.F.); +#27535 = EDGE_CURVE('',#27536,#27528,#27538,.T.); +#27536 = VERTEX_POINT('',#27537); +#27537 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#27538 = LINE('',#27539,#27540); +#27539 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#27540 = VECTOR('',#27541,1.); +#27541 = DIRECTION('',(1.,0.,0.)); +#27542 = ORIENTED_EDGE('',*,*,#27543,.F.); +#27543 = EDGE_CURVE('',#27544,#27536,#27546,.T.); +#27544 = VERTEX_POINT('',#27545); +#27545 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#27546 = LINE('',#27547,#27548); +#27547 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#27548 = VECTOR('',#27549,1.); +#27549 = DIRECTION('',(0.,-1.,0.)); +#27550 = ORIENTED_EDGE('',*,*,#27551,.F.); +#27551 = EDGE_CURVE('',#27552,#27544,#27554,.T.); +#27552 = VERTEX_POINT('',#27553); +#27553 = CARTESIAN_POINT('',(1.5,0.7,0.)); +#27554 = LINE('',#27555,#27556); +#27555 = CARTESIAN_POINT('',(2.,0.7,0.)); +#27556 = VECTOR('',#27557,1.); +#27557 = DIRECTION('',(-1.,0.,0.)); +#27558 = ORIENTED_EDGE('',*,*,#27559,.T.); +#27559 = EDGE_CURVE('',#27552,#27560,#27562,.T.); +#27560 = VERTEX_POINT('',#27561); +#27561 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#27562 = LINE('',#27563,#27564); +#27563 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#27564 = VECTOR('',#27565,1.); +#27565 = DIRECTION('',(0.,1.,0.)); +#27566 = ORIENTED_EDGE('',*,*,#27567,.T.); +#27567 = EDGE_CURVE('',#27560,#27568,#27570,.T.); +#27568 = VERTEX_POINT('',#27569); +#27569 = CARTESIAN_POINT('',(0.925,1.05,0.)); +#27570 = LINE('',#27571,#27572); +#27571 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#27572 = VECTOR('',#27573,1.); +#27573 = DIRECTION('',(-1.,0.,0.)); +#27574 = ORIENTED_EDGE('',*,*,#27575,.T.); +#27575 = EDGE_CURVE('',#27568,#27576,#27578,.T.); +#27576 = VERTEX_POINT('',#27577); +#27577 = CARTESIAN_POINT('',(0.925,1.25,0.)); +#27578 = LINE('',#27579,#27580); +#27579 = CARTESIAN_POINT('',(0.925,1.05,0.)); +#27580 = VECTOR('',#27581,1.); +#27581 = DIRECTION('',(0.,1.,0.)); +#27582 = ORIENTED_EDGE('',*,*,#27583,.F.); +#27583 = EDGE_CURVE('',#27584,#27576,#27586,.T.); +#27584 = VERTEX_POINT('',#27585); +#27585 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#27586 = LINE('',#27587,#27588); +#27587 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#27588 = VECTOR('',#27589,1.); +#27589 = DIRECTION('',(1.,0.,0.)); +#27590 = ORIENTED_EDGE('',*,*,#27591,.F.); +#27591 = EDGE_CURVE('',#27592,#27584,#27594,.T.); +#27592 = VERTEX_POINT('',#27593); +#27593 = CARTESIAN_POINT('',(-0.925,1.05,0.)); +#27594 = LINE('',#27595,#27596); +#27595 = CARTESIAN_POINT('',(-0.925,1.05,0.)); +#27596 = VECTOR('',#27597,1.); +#27597 = DIRECTION('',(0.,1.,0.)); +#27598 = ORIENTED_EDGE('',*,*,#27599,.T.); +#27599 = EDGE_CURVE('',#27592,#27600,#27602,.T.); +#27600 = VERTEX_POINT('',#27601); +#27601 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#27602 = LINE('',#27603,#27604); +#27603 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#27604 = VECTOR('',#27605,1.); +#27605 = DIRECTION('',(-1.,0.,0.)); +#27606 = ORIENTED_EDGE('',*,*,#27607,.T.); +#27607 = EDGE_CURVE('',#27600,#27608,#27610,.T.); +#27608 = VERTEX_POINT('',#27609); +#27609 = CARTESIAN_POINT('',(-1.5,0.7,0.)); +#27610 = LINE('',#27611,#27612); +#27611 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#27612 = VECTOR('',#27613,1.); +#27613 = DIRECTION('',(0.,-1.,0.)); +#27614 = ORIENTED_EDGE('',*,*,#27615,.F.); +#27615 = EDGE_CURVE('',#27616,#27608,#27618,.T.); +#27616 = VERTEX_POINT('',#27617); +#27617 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#27618 = LINE('',#27619,#27620); +#27619 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#27620 = VECTOR('',#27621,1.); +#27621 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27622 = ORIENTED_EDGE('',*,*,#27623,.F.); +#27623 = EDGE_CURVE('',#27490,#27616,#27624,.T.); +#27624 = LINE('',#27625,#27626); +#27625 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#27626 = VECTOR('',#27627,1.); +#27627 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#27628 = PLANE('',#27629); +#27629 = AXIS2_PLACEMENT_3D('',#27630,#27631,#27632); +#27630 = CARTESIAN_POINT('',(0.,0.,0.)); +#27631 = DIRECTION('',(0.,0.,1.)); +#27632 = DIRECTION('',(1.,0.,-0.)); +#27633 = ADVANCED_FACE('',(#27634),#27668,.F.); +#27634 = FACE_BOUND('',#27635,.F.); +#27635 = EDGE_LOOP('',(#27636,#27644,#27645,#27646,#27654,#27662)); +#27636 = ORIENTED_EDGE('',*,*,#27637,.F.); +#27637 = EDGE_CURVE('',#27505,#27638,#27640,.T.); +#27638 = VERTEX_POINT('',#27639); +#27639 = CARTESIAN_POINT('',(-0.925,-1.25,0.1)); +#27640 = LINE('',#27641,#27642); +#27641 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#27642 = VECTOR('',#27643,1.); +#27643 = DIRECTION('',(0.,0.,1.)); +#27644 = ORIENTED_EDGE('',*,*,#27504,.T.); +#27645 = ORIENTED_EDGE('',*,*,#27473,.T.); +#27646 = ORIENTED_EDGE('',*,*,#27647,.F.); +#27647 = EDGE_CURVE('',#27648,#27466,#27650,.T.); +#27648 = VERTEX_POINT('',#27649); +#27649 = CARTESIAN_POINT('',(-0.925,-1.13,0.6)); +#27650 = LINE('',#27651,#27652); +#27651 = CARTESIAN_POINT('',(-0.925,-1.25,0.6)); +#27652 = VECTOR('',#27653,1.); +#27653 = DIRECTION('',(0.,1.,0.)); +#27654 = ORIENTED_EDGE('',*,*,#27655,.F.); +#27655 = EDGE_CURVE('',#27656,#27648,#27658,.T.); +#27656 = VERTEX_POINT('',#27657); +#27657 = CARTESIAN_POINT('',(-0.925,-1.13,0.1)); +#27658 = LINE('',#27659,#27660); +#27659 = CARTESIAN_POINT('',(-0.925,-1.13,0.1)); +#27660 = VECTOR('',#27661,1.); +#27661 = DIRECTION('',(0.,0.,1.)); +#27662 = ORIENTED_EDGE('',*,*,#27663,.T.); +#27663 = EDGE_CURVE('',#27656,#27638,#27664,.T.); +#27664 = LINE('',#27665,#27666); +#27665 = CARTESIAN_POINT('',(-0.925,-1.13,0.1)); +#27666 = VECTOR('',#27667,1.); +#27667 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27668 = PLANE('',#27669); +#27669 = AXIS2_PLACEMENT_3D('',#27670,#27671,#27672); +#27670 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#27671 = DIRECTION('',(1.,0.,0.)); +#27672 = DIRECTION('',(0.,0.,1.)); +#27673 = ADVANCED_FACE('',(#27674),#27692,.T.); +#27674 = FACE_BOUND('',#27675,.T.); +#27675 = EDGE_LOOP('',(#27676,#27677,#27685,#27691)); +#27676 = ORIENTED_EDGE('',*,*,#27647,.F.); +#27677 = ORIENTED_EDGE('',*,*,#27678,.F.); +#27678 = EDGE_CURVE('',#27679,#27648,#27681,.T.); +#27679 = VERTEX_POINT('',#27680); +#27680 = CARTESIAN_POINT('',(0.925,-1.13,0.6)); +#27681 = LINE('',#27682,#27683); +#27682 = CARTESIAN_POINT('',(0.925,-1.13,0.6)); +#27683 = VECTOR('',#27684,1.); +#27684 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#27685 = ORIENTED_EDGE('',*,*,#27686,.T.); +#27686 = EDGE_CURVE('',#27679,#27458,#27687,.T.); +#27687 = LINE('',#27688,#27689); +#27688 = CARTESIAN_POINT('',(0.925,-1.25,0.6)); +#27689 = VECTOR('',#27690,1.); +#27690 = DIRECTION('',(0.,1.,0.)); +#27691 = ORIENTED_EDGE('',*,*,#27465,.F.); +#27692 = PLANE('',#27693); +#27693 = AXIS2_PLACEMENT_3D('',#27694,#27695,#27696); +#27694 = CARTESIAN_POINT('',(-0.925,-1.25,0.6)); +#27695 = DIRECTION('',(0.,0.,1.)); +#27696 = DIRECTION('',(1.,0.,-0.)); +#27697 = ADVANCED_FACE('',(#27698),#27725,.T.); +#27698 = FACE_BOUND('',#27699,.T.); +#27699 = EDGE_LOOP('',(#27700,#27708,#27709,#27710,#27711,#27719)); +#27700 = ORIENTED_EDGE('',*,*,#27701,.F.); +#27701 = EDGE_CURVE('',#27513,#27702,#27704,.T.); +#27702 = VERTEX_POINT('',#27703); +#27703 = CARTESIAN_POINT('',(0.925,-1.25,0.1)); +#27704 = LINE('',#27705,#27706); +#27705 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#27706 = VECTOR('',#27707,1.); +#27707 = DIRECTION('',(0.,0.,1.)); +#27708 = ORIENTED_EDGE('',*,*,#27520,.T.); +#27709 = ORIENTED_EDGE('',*,*,#27457,.T.); +#27710 = ORIENTED_EDGE('',*,*,#27686,.F.); +#27711 = ORIENTED_EDGE('',*,*,#27712,.F.); +#27712 = EDGE_CURVE('',#27713,#27679,#27715,.T.); +#27713 = VERTEX_POINT('',#27714); +#27714 = CARTESIAN_POINT('',(0.925,-1.13,0.1)); +#27715 = LINE('',#27716,#27717); +#27716 = CARTESIAN_POINT('',(0.925,-1.13,0.1)); +#27717 = VECTOR('',#27718,1.); +#27718 = DIRECTION('',(0.,0.,1.)); +#27719 = ORIENTED_EDGE('',*,*,#27720,.T.); +#27720 = EDGE_CURVE('',#27713,#27702,#27721,.T.); +#27721 = LINE('',#27722,#27723); +#27722 = CARTESIAN_POINT('',(0.925,-1.13,0.1)); +#27723 = VECTOR('',#27724,1.); +#27724 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27725 = PLANE('',#27726); +#27726 = AXIS2_PLACEMENT_3D('',#27727,#27728,#27729); +#27727 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#27728 = DIRECTION('',(1.,0.,0.)); +#27729 = DIRECTION('',(0.,0.,1.)); +#27730 = ADVANCED_FACE('',(#27731),#27852,.F.); +#27731 = FACE_BOUND('',#27732,.F.); +#27732 = EDGE_LOOP('',(#27733,#27734,#27735,#27743,#27751,#27759,#27767, + #27775,#27783,#27791,#27799,#27807,#27815,#27823,#27829,#27830, + #27838,#27846)); +#27733 = ORIENTED_EDGE('',*,*,#27527,.F.); +#27734 = ORIENTED_EDGE('',*,*,#27441,.T.); +#27735 = ORIENTED_EDGE('',*,*,#27736,.T.); +#27736 = EDGE_CURVE('',#27434,#27737,#27739,.T.); +#27737 = VERTEX_POINT('',#27738); +#27738 = CARTESIAN_POINT('',(1.5,-1.13,0.6)); +#27739 = LINE('',#27740,#27741); +#27740 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#27741 = VECTOR('',#27742,1.); +#27742 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27743 = ORIENTED_EDGE('',*,*,#27744,.T.); +#27744 = EDGE_CURVE('',#27737,#27745,#27747,.T.); +#27745 = VERTEX_POINT('',#27746); +#27746 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#27747 = LINE('',#27748,#27749); +#27748 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#27749 = VECTOR('',#27750,1.); +#27750 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27751 = ORIENTED_EDGE('',*,*,#27752,.T.); +#27752 = EDGE_CURVE('',#27745,#27753,#27755,.T.); +#27753 = VERTEX_POINT('',#27754); +#27754 = CARTESIAN_POINT('',(1.5,-1.25,0.63)); +#27755 = LINE('',#27756,#27757); +#27756 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#27757 = VECTOR('',#27758,1.); +#27758 = DIRECTION('',(0.,0.,1.)); +#27759 = ORIENTED_EDGE('',*,*,#27760,.T.); +#27760 = EDGE_CURVE('',#27753,#27761,#27763,.T.); +#27761 = VERTEX_POINT('',#27762); +#27762 = CARTESIAN_POINT('',(1.5,-1.1,1.08)); +#27763 = LINE('',#27764,#27765); +#27764 = CARTESIAN_POINT('',(1.5,-1.25,0.63)); +#27765 = VECTOR('',#27766,1.); +#27766 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#27767 = ORIENTED_EDGE('',*,*,#27768,.F.); +#27768 = EDGE_CURVE('',#27769,#27761,#27771,.T.); +#27769 = VERTEX_POINT('',#27770); +#27770 = CARTESIAN_POINT('',(1.5,-1.,1.08)); +#27771 = LINE('',#27772,#27773); +#27772 = CARTESIAN_POINT('',(1.5,1.1,1.08)); +#27773 = VECTOR('',#27774,1.); +#27774 = DIRECTION('',(-2.0185873175E-16,-1.,0.)); +#27775 = ORIENTED_EDGE('',*,*,#27776,.T.); +#27776 = EDGE_CURVE('',#27769,#27777,#27779,.T.); +#27777 = VERTEX_POINT('',#27778); +#27778 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#27779 = LINE('',#27780,#27781); +#27780 = CARTESIAN_POINT('',(1.5,-1.,1.08)); +#27781 = VECTOR('',#27782,1.); +#27782 = DIRECTION('',(0.,1.,0.)); +#27783 = ORIENTED_EDGE('',*,*,#27784,.F.); +#27784 = EDGE_CURVE('',#27785,#27777,#27787,.T.); +#27785 = VERTEX_POINT('',#27786); +#27786 = CARTESIAN_POINT('',(1.5,1.1,1.08)); +#27787 = LINE('',#27788,#27789); +#27788 = CARTESIAN_POINT('',(1.5,1.1,1.08)); +#27789 = VECTOR('',#27790,1.); +#27790 = DIRECTION('',(-2.0185873175E-16,-1.,0.)); +#27791 = ORIENTED_EDGE('',*,*,#27792,.F.); +#27792 = EDGE_CURVE('',#27793,#27785,#27795,.T.); +#27793 = VERTEX_POINT('',#27794); +#27794 = CARTESIAN_POINT('',(1.5,1.25,0.63)); +#27795 = LINE('',#27796,#27797); +#27796 = CARTESIAN_POINT('',(1.5,1.25,0.63)); +#27797 = VECTOR('',#27798,1.); +#27798 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#27799 = ORIENTED_EDGE('',*,*,#27800,.F.); +#27800 = EDGE_CURVE('',#27801,#27793,#27803,.T.); +#27801 = VERTEX_POINT('',#27802); +#27802 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#27803 = LINE('',#27804,#27805); +#27804 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#27805 = VECTOR('',#27806,1.); +#27806 = DIRECTION('',(0.,0.,1.)); +#27807 = ORIENTED_EDGE('',*,*,#27808,.F.); +#27808 = EDGE_CURVE('',#27809,#27801,#27811,.T.); +#27809 = VERTEX_POINT('',#27810); +#27810 = CARTESIAN_POINT('',(1.5,1.13,0.6)); +#27811 = LINE('',#27812,#27813); +#27812 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#27813 = VECTOR('',#27814,1.); +#27814 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27815 = ORIENTED_EDGE('',*,*,#27816,.F.); +#27816 = EDGE_CURVE('',#27817,#27809,#27819,.T.); +#27817 = VERTEX_POINT('',#27818); +#27818 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#27819 = LINE('',#27820,#27821); +#27820 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#27821 = VECTOR('',#27822,1.); +#27822 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27823 = ORIENTED_EDGE('',*,*,#27824,.F.); +#27824 = EDGE_CURVE('',#27560,#27817,#27825,.T.); +#27825 = LINE('',#27826,#27827); +#27826 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#27827 = VECTOR('',#27828,1.); +#27828 = DIRECTION('',(0.,0.,1.)); +#27829 = ORIENTED_EDGE('',*,*,#27559,.F.); +#27830 = ORIENTED_EDGE('',*,*,#27831,.T.); +#27831 = EDGE_CURVE('',#27552,#27832,#27834,.T.); +#27832 = VERTEX_POINT('',#27833); +#27833 = CARTESIAN_POINT('',(1.5,0.7,0.1)); +#27834 = LINE('',#27835,#27836); +#27835 = CARTESIAN_POINT('',(1.5,0.7,0.)); +#27836 = VECTOR('',#27837,1.); +#27837 = DIRECTION('',(0.,0.,1.)); +#27838 = ORIENTED_EDGE('',*,*,#27839,.F.); +#27839 = EDGE_CURVE('',#27840,#27832,#27842,.T.); +#27840 = VERTEX_POINT('',#27841); +#27841 = CARTESIAN_POINT('',(1.5,-0.7,0.1)); +#27842 = LINE('',#27843,#27844); +#27843 = CARTESIAN_POINT('',(1.5,-0.525,0.1)); +#27844 = VECTOR('',#27845,1.); +#27845 = DIRECTION('',(0.,1.,0.)); +#27846 = ORIENTED_EDGE('',*,*,#27847,.T.); +#27847 = EDGE_CURVE('',#27840,#27528,#27848,.T.); +#27848 = LINE('',#27849,#27850); +#27849 = CARTESIAN_POINT('',(1.5,-0.7,0.)); +#27850 = VECTOR('',#27851,1.); +#27851 = DIRECTION('',(0.,0.,-1.)); +#27852 = PLANE('',#27853); +#27853 = AXIS2_PLACEMENT_3D('',#27854,#27855,#27856); +#27854 = CARTESIAN_POINT('',(1.5,-1.05,0.)); +#27855 = DIRECTION('',(-1.,0.,0.)); +#27856 = DIRECTION('',(0.,1.,0.)); +#27857 = ADVANCED_FACE('',(#27858),#27876,.F.); +#27858 = FACE_BOUND('',#27859,.F.); +#27859 = EDGE_LOOP('',(#27860,#27861,#27862,#27870)); +#27860 = ORIENTED_EDGE('',*,*,#27736,.F.); +#27861 = ORIENTED_EDGE('',*,*,#27433,.T.); +#27862 = ORIENTED_EDGE('',*,*,#27863,.T.); +#27863 = EDGE_CURVE('',#27426,#27864,#27866,.T.); +#27864 = VERTEX_POINT('',#27865); +#27865 = CARTESIAN_POINT('',(1.225,-1.13,0.6)); +#27866 = LINE('',#27867,#27868); +#27867 = CARTESIAN_POINT('',(1.225,-1.05,0.6)); +#27868 = VECTOR('',#27869,1.); +#27869 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27870 = ORIENTED_EDGE('',*,*,#27871,.T.); +#27871 = EDGE_CURVE('',#27864,#27737,#27872,.T.); +#27872 = LINE('',#27873,#27874); +#27873 = CARTESIAN_POINT('',(1.225,-1.13,0.6)); +#27874 = VECTOR('',#27875,1.); +#27875 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27876 = PLANE('',#27877); +#27877 = AXIS2_PLACEMENT_3D('',#27878,#27879,#27880); +#27878 = CARTESIAN_POINT('',(1.5,-1.05,0.6)); +#27879 = DIRECTION('',(0.,0.,1.)); +#27880 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27881 = ADVANCED_FACE('',(#27882),#27908,.T.); +#27882 = FACE_BOUND('',#27883,.T.); +#27883 = EDGE_LOOP('',(#27884,#27885,#27886,#27894,#27902)); +#27884 = ORIENTED_EDGE('',*,*,#27425,.T.); +#27885 = ORIENTED_EDGE('',*,*,#27863,.T.); +#27886 = ORIENTED_EDGE('',*,*,#27887,.F.); +#27887 = EDGE_CURVE('',#27888,#27864,#27890,.T.); +#27888 = VERTEX_POINT('',#27889); +#27889 = CARTESIAN_POINT('',(1.225,-1.13,0.99)); +#27890 = LINE('',#27891,#27892); +#27891 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#27892 = VECTOR('',#27893,1.); +#27893 = DIRECTION('',(0.,0.,-1.)); +#27894 = ORIENTED_EDGE('',*,*,#27895,.T.); +#27895 = EDGE_CURVE('',#27888,#27896,#27898,.T.); +#27896 = VERTEX_POINT('',#27897); +#27897 = CARTESIAN_POINT('',(1.225,-1.1,1.08)); +#27898 = LINE('',#27899,#27900); +#27899 = CARTESIAN_POINT('',(1.225,-1.25,0.63)); +#27900 = VECTOR('',#27901,1.); +#27901 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#27902 = ORIENTED_EDGE('',*,*,#27903,.T.); +#27903 = EDGE_CURVE('',#27896,#27418,#27904,.T.); +#27904 = LINE('',#27905,#27906); +#27905 = CARTESIAN_POINT('',(1.225,-1.1,1.08)); +#27906 = VECTOR('',#27907,1.); +#27907 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27908 = PLANE('',#27909); +#27909 = AXIS2_PLACEMENT_3D('',#27910,#27911,#27912); +#27910 = CARTESIAN_POINT('',(1.225,-1.120112441071,0.81113046028)); +#27911 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#27912 = DIRECTION('',(0.,0.,-1.)); +#27913 = ADVANCED_FACE('',(#27914),#27948,.F.); +#27914 = FACE_BOUND('',#27915,.F.); +#27915 = EDGE_LOOP('',(#27916,#27917,#27925,#27933,#27941,#27947)); +#27916 = ORIENTED_EDGE('',*,*,#27417,.F.); +#27917 = ORIENTED_EDGE('',*,*,#27918,.F.); +#27918 = EDGE_CURVE('',#27919,#27410,#27921,.T.); +#27919 = VERTEX_POINT('',#27920); +#27920 = CARTESIAN_POINT('',(-1.225,-1.1,1.08)); +#27921 = LINE('',#27922,#27923); +#27922 = CARTESIAN_POINT('',(-1.225,-1.1,1.08)); +#27923 = VECTOR('',#27924,1.); +#27924 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27925 = ORIENTED_EDGE('',*,*,#27926,.F.); +#27926 = EDGE_CURVE('',#27927,#27919,#27929,.T.); +#27927 = VERTEX_POINT('',#27928); +#27928 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#27929 = LINE('',#27930,#27931); +#27930 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#27931 = VECTOR('',#27932,1.); +#27932 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27933 = ORIENTED_EDGE('',*,*,#27934,.T.); +#27934 = EDGE_CURVE('',#27927,#27935,#27937,.T.); +#27935 = VERTEX_POINT('',#27936); +#27936 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#27937 = LINE('',#27938,#27939); +#27938 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#27939 = VECTOR('',#27940,1.); +#27940 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27941 = ORIENTED_EDGE('',*,*,#27942,.T.); +#27942 = EDGE_CURVE('',#27935,#27896,#27943,.T.); +#27943 = LINE('',#27944,#27945); +#27944 = CARTESIAN_POINT('',(1.225,-1.25,1.08)); +#27945 = VECTOR('',#27946,1.); +#27946 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#27947 = ORIENTED_EDGE('',*,*,#27903,.T.); +#27948 = PLANE('',#27949); +#27949 = AXIS2_PLACEMENT_3D('',#27950,#27951,#27952); +#27950 = CARTESIAN_POINT('',(0.,0.,1.08)); +#27951 = DIRECTION('',(0.,0.,1.)); +#27952 = DIRECTION('',(1.,0.,-0.)); +#27953 = ADVANCED_FACE('',(#27954),#27980,.T.); +#27954 = FACE_BOUND('',#27955,.F.); +#27955 = EDGE_LOOP('',(#27956,#27957,#27965,#27973,#27979)); +#27956 = ORIENTED_EDGE('',*,*,#27409,.T.); +#27957 = ORIENTED_EDGE('',*,*,#27958,.T.); +#27958 = EDGE_CURVE('',#27402,#27959,#27961,.T.); +#27959 = VERTEX_POINT('',#27960); +#27960 = CARTESIAN_POINT('',(-1.225,-1.13,0.6)); +#27961 = LINE('',#27962,#27963); +#27962 = CARTESIAN_POINT('',(-1.225,-1.05,0.6)); +#27963 = VECTOR('',#27964,1.); +#27964 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27965 = ORIENTED_EDGE('',*,*,#27966,.F.); +#27966 = EDGE_CURVE('',#27967,#27959,#27969,.T.); +#27967 = VERTEX_POINT('',#27968); +#27968 = CARTESIAN_POINT('',(-1.225,-1.13,0.99)); +#27969 = LINE('',#27970,#27971); +#27970 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#27971 = VECTOR('',#27972,1.); +#27972 = DIRECTION('',(0.,0.,-1.)); +#27973 = ORIENTED_EDGE('',*,*,#27974,.T.); +#27974 = EDGE_CURVE('',#27967,#27919,#27975,.T.); +#27975 = LINE('',#27976,#27977); +#27976 = CARTESIAN_POINT('',(-1.225,-1.25,0.63)); +#27977 = VECTOR('',#27978,1.); +#27978 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#27979 = ORIENTED_EDGE('',*,*,#27918,.T.); +#27980 = PLANE('',#27981); +#27981 = AXIS2_PLACEMENT_3D('',#27982,#27983,#27984); +#27982 = CARTESIAN_POINT('',(-1.225,-1.120112441071,0.81113046028)); +#27983 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#27984 = DIRECTION('',(0.,0.,1.)); +#27985 = ADVANCED_FACE('',(#27986),#28004,.F.); +#27986 = FACE_BOUND('',#27987,.T.); +#27987 = EDGE_LOOP('',(#27988,#27996,#27997,#27998)); +#27988 = ORIENTED_EDGE('',*,*,#27989,.F.); +#27989 = EDGE_CURVE('',#27394,#27990,#27992,.T.); +#27990 = VERTEX_POINT('',#27991); +#27991 = CARTESIAN_POINT('',(-1.5,-1.13,0.6)); +#27992 = LINE('',#27993,#27994); +#27993 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#27994 = VECTOR('',#27995,1.); +#27995 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#27996 = ORIENTED_EDGE('',*,*,#27401,.T.); +#27997 = ORIENTED_EDGE('',*,*,#27958,.T.); +#27998 = ORIENTED_EDGE('',*,*,#27999,.T.); +#27999 = EDGE_CURVE('',#27959,#27990,#28000,.T.); +#28000 = LINE('',#28001,#28002); +#28001 = CARTESIAN_POINT('',(-1.225,-1.13,0.6)); +#28002 = VECTOR('',#28003,1.); +#28003 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#28004 = PLANE('',#28005); +#28005 = AXIS2_PLACEMENT_3D('',#28006,#28007,#28008); +#28006 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#28007 = DIRECTION('',(0.,0.,1.)); +#28008 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#28009 = ADVANCED_FACE('',(#28010),#28124,.F.); +#28010 = FACE_BOUND('',#28011,.F.); +#28011 = EDGE_LOOP('',(#28012,#28013,#28021,#28029,#28037,#28045,#28053, + #28061,#28069,#28077,#28085,#28093,#28099,#28100,#28101,#28102, + #28110,#28118)); +#28012 = ORIENTED_EDGE('',*,*,#27607,.F.); +#28013 = ORIENTED_EDGE('',*,*,#28014,.T.); +#28014 = EDGE_CURVE('',#27600,#28015,#28017,.T.); +#28015 = VERTEX_POINT('',#28016); +#28016 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#28017 = LINE('',#28018,#28019); +#28018 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#28019 = VECTOR('',#28020,1.); +#28020 = DIRECTION('',(0.,0.,1.)); +#28021 = ORIENTED_EDGE('',*,*,#28022,.T.); +#28022 = EDGE_CURVE('',#28015,#28023,#28025,.T.); +#28023 = VERTEX_POINT('',#28024); +#28024 = CARTESIAN_POINT('',(-1.5,1.13,0.6)); +#28025 = LINE('',#28026,#28027); +#28026 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#28027 = VECTOR('',#28028,1.); +#28028 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28029 = ORIENTED_EDGE('',*,*,#28030,.T.); +#28030 = EDGE_CURVE('',#28023,#28031,#28033,.T.); +#28031 = VERTEX_POINT('',#28032); +#28032 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#28033 = LINE('',#28034,#28035); +#28034 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#28035 = VECTOR('',#28036,1.); +#28036 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28037 = ORIENTED_EDGE('',*,*,#28038,.T.); +#28038 = EDGE_CURVE('',#28031,#28039,#28041,.T.); +#28039 = VERTEX_POINT('',#28040); +#28040 = CARTESIAN_POINT('',(-1.5,1.25,0.63)); +#28041 = LINE('',#28042,#28043); +#28042 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#28043 = VECTOR('',#28044,1.); +#28044 = DIRECTION('',(0.,0.,1.)); +#28045 = ORIENTED_EDGE('',*,*,#28046,.T.); +#28046 = EDGE_CURVE('',#28039,#28047,#28049,.T.); +#28047 = VERTEX_POINT('',#28048); +#28048 = CARTESIAN_POINT('',(-1.5,1.1,1.08)); +#28049 = LINE('',#28050,#28051); +#28050 = CARTESIAN_POINT('',(-1.5,1.25,0.63)); +#28051 = VECTOR('',#28052,1.); +#28052 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#28053 = ORIENTED_EDGE('',*,*,#28054,.T.); +#28054 = EDGE_CURVE('',#28047,#28055,#28057,.T.); +#28055 = VERTEX_POINT('',#28056); +#28056 = CARTESIAN_POINT('',(-1.5,1.,1.08)); +#28057 = LINE('',#28058,#28059); +#28058 = CARTESIAN_POINT('',(-1.5,1.1,1.08)); +#28059 = VECTOR('',#28060,1.); +#28060 = DIRECTION('',(-2.0185873175E-16,-1.,0.)); +#28061 = ORIENTED_EDGE('',*,*,#28062,.T.); +#28062 = EDGE_CURVE('',#28055,#28063,#28065,.T.); +#28063 = VERTEX_POINT('',#28064); +#28064 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#28065 = LINE('',#28066,#28067); +#28066 = CARTESIAN_POINT('',(-1.5,1.,1.08)); +#28067 = VECTOR('',#28068,1.); +#28068 = DIRECTION('',(0.,-1.,0.)); +#28069 = ORIENTED_EDGE('',*,*,#28070,.T.); +#28070 = EDGE_CURVE('',#28063,#28071,#28073,.T.); +#28071 = VERTEX_POINT('',#28072); +#28072 = CARTESIAN_POINT('',(-1.5,-1.1,1.08)); +#28073 = LINE('',#28074,#28075); +#28074 = CARTESIAN_POINT('',(-1.5,1.1,1.08)); +#28075 = VECTOR('',#28076,1.); +#28076 = DIRECTION('',(-2.0185873175E-16,-1.,0.)); +#28077 = ORIENTED_EDGE('',*,*,#28078,.F.); +#28078 = EDGE_CURVE('',#28079,#28071,#28081,.T.); +#28079 = VERTEX_POINT('',#28080); +#28080 = CARTESIAN_POINT('',(-1.5,-1.25,0.63)); +#28081 = LINE('',#28082,#28083); +#28082 = CARTESIAN_POINT('',(-1.5,-1.25,0.63)); +#28083 = VECTOR('',#28084,1.); +#28084 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#28085 = ORIENTED_EDGE('',*,*,#28086,.F.); +#28086 = EDGE_CURVE('',#28087,#28079,#28089,.T.); +#28087 = VERTEX_POINT('',#28088); +#28088 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#28089 = LINE('',#28090,#28091); +#28090 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#28091 = VECTOR('',#28092,1.); +#28092 = DIRECTION('',(0.,0.,1.)); +#28093 = ORIENTED_EDGE('',*,*,#28094,.F.); +#28094 = EDGE_CURVE('',#27990,#28087,#28095,.T.); +#28095 = LINE('',#28096,#28097); +#28096 = CARTESIAN_POINT('',(-1.5,-1.05,0.6)); +#28097 = VECTOR('',#28098,1.); +#28098 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#28099 = ORIENTED_EDGE('',*,*,#27989,.F.); +#28100 = ORIENTED_EDGE('',*,*,#27393,.F.); +#28101 = ORIENTED_EDGE('',*,*,#27497,.F.); +#28102 = ORIENTED_EDGE('',*,*,#28103,.T.); +#28103 = EDGE_CURVE('',#27488,#28104,#28106,.T.); +#28104 = VERTEX_POINT('',#28105); +#28105 = CARTESIAN_POINT('',(-1.5,-0.7,0.1)); +#28106 = LINE('',#28107,#28108); +#28107 = CARTESIAN_POINT('',(-1.5,-0.7,0.)); +#28108 = VECTOR('',#28109,1.); +#28109 = DIRECTION('',(0.,0.,1.)); +#28110 = ORIENTED_EDGE('',*,*,#28111,.F.); +#28111 = EDGE_CURVE('',#28112,#28104,#28114,.T.); +#28112 = VERTEX_POINT('',#28113); +#28113 = CARTESIAN_POINT('',(-1.5,0.7,0.1)); +#28114 = LINE('',#28115,#28116); +#28115 = CARTESIAN_POINT('',(-1.5,0.525,0.1)); +#28116 = VECTOR('',#28117,1.); +#28117 = DIRECTION('',(0.,-1.,0.)); +#28118 = ORIENTED_EDGE('',*,*,#28119,.T.); +#28119 = EDGE_CURVE('',#28112,#27608,#28120,.T.); +#28120 = LINE('',#28121,#28122); +#28121 = CARTESIAN_POINT('',(-1.5,0.7,0.)); +#28122 = VECTOR('',#28123,1.); +#28123 = DIRECTION('',(0.,0.,-1.)); +#28124 = PLANE('',#28125); +#28125 = AXIS2_PLACEMENT_3D('',#28126,#28127,#28128); +#28126 = CARTESIAN_POINT('',(-1.5,1.05,0.)); +#28127 = DIRECTION('',(1.,0.,0.)); +#28128 = DIRECTION('',(0.,-1.,0.)); +#28129 = ADVANCED_FACE('',(#28130),#28157,.F.); +#28130 = FACE_BOUND('',#28131,.F.); +#28131 = EDGE_LOOP('',(#28132,#28133,#28141,#28149,#28155,#28156)); +#28132 = ORIENTED_EDGE('',*,*,#27615,.T.); +#28133 = ORIENTED_EDGE('',*,*,#28134,.T.); +#28134 = EDGE_CURVE('',#27608,#28135,#28137,.T.); +#28135 = VERTEX_POINT('',#28136); +#28136 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#28137 = LINE('',#28138,#28139); +#28138 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#28139 = VECTOR('',#28140,1.); +#28140 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28141 = ORIENTED_EDGE('',*,*,#28142,.T.); +#28142 = EDGE_CURVE('',#28135,#28143,#28145,.T.); +#28143 = VERTEX_POINT('',#28144); +#28144 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#28145 = LINE('',#28146,#28147); +#28146 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#28147 = VECTOR('',#28148,1.); +#28148 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#28149 = ORIENTED_EDGE('',*,*,#28150,.T.); +#28150 = EDGE_CURVE('',#28143,#27488,#28151,.T.); +#28151 = LINE('',#28152,#28153); +#28152 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#28153 = VECTOR('',#28154,1.); +#28154 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#28155 = ORIENTED_EDGE('',*,*,#27487,.T.); +#28156 = ORIENTED_EDGE('',*,*,#27623,.T.); +#28157 = PLANE('',#28158); +#28158 = AXIS2_PLACEMENT_3D('',#28159,#28160,#28161); +#28159 = CARTESIAN_POINT('',(-1.7,-3.673940397442E-17,0.)); +#28160 = DIRECTION('',(0.,0.,1.)); +#28161 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28162 = ADVANCED_FACE('',(#28163),#28190,.F.); +#28163 = FACE_BOUND('',#28164,.F.); +#28164 = EDGE_LOOP('',(#28165,#28166,#28167,#28175,#28183,#28189)); +#28165 = ORIENTED_EDGE('',*,*,#27512,.F.); +#28166 = ORIENTED_EDGE('',*,*,#27637,.T.); +#28167 = ORIENTED_EDGE('',*,*,#28168,.T.); +#28168 = EDGE_CURVE('',#27638,#28169,#28171,.T.); +#28169 = VERTEX_POINT('',#28170); +#28170 = CARTESIAN_POINT('',(-0.925,-1.25,0.6)); +#28171 = LINE('',#28172,#28173); +#28172 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#28173 = VECTOR('',#28174,1.); +#28174 = DIRECTION('',(0.,0.,1.)); +#28175 = ORIENTED_EDGE('',*,*,#28176,.T.); +#28176 = EDGE_CURVE('',#28169,#28177,#28179,.T.); +#28177 = VERTEX_POINT('',#28178); +#28178 = CARTESIAN_POINT('',(0.925,-1.25,0.6)); +#28179 = LINE('',#28180,#28181); +#28180 = CARTESIAN_POINT('',(-0.925,-1.25,0.6)); +#28181 = VECTOR('',#28182,1.); +#28182 = DIRECTION('',(1.,0.,0.)); +#28183 = ORIENTED_EDGE('',*,*,#28184,.F.); +#28184 = EDGE_CURVE('',#27702,#28177,#28185,.T.); +#28185 = LINE('',#28186,#28187); +#28186 = CARTESIAN_POINT('',(0.925,-1.25,0.)); +#28187 = VECTOR('',#28188,1.); +#28188 = DIRECTION('',(0.,0.,1.)); +#28189 = ORIENTED_EDGE('',*,*,#27701,.F.); +#28190 = PLANE('',#28191); +#28191 = AXIS2_PLACEMENT_3D('',#28192,#28193,#28194); +#28192 = CARTESIAN_POINT('',(-0.925,-1.25,0.)); +#28193 = DIRECTION('',(0.,1.,0.)); +#28194 = DIRECTION('',(0.,-0.,1.)); +#28195 = ADVANCED_FACE('',(#28196),#28223,.F.); +#28196 = FACE_BOUND('',#28197,.F.); +#28197 = EDGE_LOOP('',(#28198,#28199,#28207,#28215,#28221,#28222)); +#28198 = ORIENTED_EDGE('',*,*,#27535,.T.); +#28199 = ORIENTED_EDGE('',*,*,#28200,.T.); +#28200 = EDGE_CURVE('',#27528,#28201,#28203,.T.); +#28201 = VERTEX_POINT('',#28202); +#28202 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#28203 = LINE('',#28204,#28205); +#28204 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#28205 = VECTOR('',#28206,1.); +#28206 = DIRECTION('',(1.,0.,0.)); +#28207 = ORIENTED_EDGE('',*,*,#28208,.T.); +#28208 = EDGE_CURVE('',#28201,#28209,#28211,.T.); +#28209 = VERTEX_POINT('',#28210); +#28210 = CARTESIAN_POINT('',(2.,0.7,0.)); +#28211 = LINE('',#28212,#28213); +#28212 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#28213 = VECTOR('',#28214,1.); +#28214 = DIRECTION('',(0.,1.,0.)); +#28215 = ORIENTED_EDGE('',*,*,#28216,.T.); +#28216 = EDGE_CURVE('',#28209,#27552,#28217,.T.); +#28217 = LINE('',#28218,#28219); +#28218 = CARTESIAN_POINT('',(2.,0.7,0.)); +#28219 = VECTOR('',#28220,1.); +#28220 = DIRECTION('',(-1.,0.,0.)); +#28221 = ORIENTED_EDGE('',*,*,#27551,.T.); +#28222 = ORIENTED_EDGE('',*,*,#27543,.T.); +#28223 = PLANE('',#28224); +#28224 = AXIS2_PLACEMENT_3D('',#28225,#28226,#28227); +#28225 = CARTESIAN_POINT('',(1.7,0.,0.)); +#28226 = DIRECTION('',(0.,0.,1.)); +#28227 = DIRECTION('',(1.,0.,-0.)); +#28228 = ADVANCED_FACE('',(#28229),#28295,.F.); +#28229 = FACE_BOUND('',#28230,.F.); +#28230 = EDGE_LOOP('',(#28231,#28232,#28233,#28241,#28249,#28257,#28265, + #28271,#28272,#28273,#28281,#28289)); +#28231 = ORIENTED_EDGE('',*,*,#27567,.F.); +#28232 = ORIENTED_EDGE('',*,*,#27824,.T.); +#28233 = ORIENTED_EDGE('',*,*,#28234,.T.); +#28234 = EDGE_CURVE('',#27817,#28235,#28237,.T.); +#28235 = VERTEX_POINT('',#28236); +#28236 = CARTESIAN_POINT('',(1.225,1.05,0.6)); +#28237 = LINE('',#28238,#28239); +#28238 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#28239 = VECTOR('',#28240,1.); +#28240 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28241 = ORIENTED_EDGE('',*,*,#28242,.F.); +#28242 = EDGE_CURVE('',#28243,#28235,#28245,.T.); +#28243 = VERTEX_POINT('',#28244); +#28244 = CARTESIAN_POINT('',(1.225,1.05,1.08)); +#28245 = LINE('',#28246,#28247); +#28246 = CARTESIAN_POINT('',(1.225,1.05,1.08)); +#28247 = VECTOR('',#28248,1.); +#28248 = DIRECTION('',(0.,0.,-1.)); +#28249 = ORIENTED_EDGE('',*,*,#28250,.T.); +#28250 = EDGE_CURVE('',#28243,#28251,#28253,.T.); +#28251 = VERTEX_POINT('',#28252); +#28252 = CARTESIAN_POINT('',(-1.225,1.05,1.08)); +#28253 = LINE('',#28254,#28255); +#28254 = CARTESIAN_POINT('',(1.5,1.05,1.08)); +#28255 = VECTOR('',#28256,1.); +#28256 = DIRECTION('',(-1.,0.,0.)); +#28257 = ORIENTED_EDGE('',*,*,#28258,.T.); +#28258 = EDGE_CURVE('',#28251,#28259,#28261,.T.); +#28259 = VERTEX_POINT('',#28260); +#28260 = CARTESIAN_POINT('',(-1.225,1.05,0.6)); +#28261 = LINE('',#28262,#28263); +#28262 = CARTESIAN_POINT('',(-1.225,1.05,1.08)); +#28263 = VECTOR('',#28264,1.); +#28264 = DIRECTION('',(0.,0.,-1.)); +#28265 = ORIENTED_EDGE('',*,*,#28266,.F.); +#28266 = EDGE_CURVE('',#28015,#28259,#28267,.T.); +#28267 = LINE('',#28268,#28269); +#28268 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#28269 = VECTOR('',#28270,1.); +#28270 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28271 = ORIENTED_EDGE('',*,*,#28014,.F.); +#28272 = ORIENTED_EDGE('',*,*,#27599,.F.); +#28273 = ORIENTED_EDGE('',*,*,#28274,.T.); +#28274 = EDGE_CURVE('',#27592,#28275,#28277,.T.); +#28275 = VERTEX_POINT('',#28276); +#28276 = CARTESIAN_POINT('',(-0.925,1.05,0.6)); +#28277 = LINE('',#28278,#28279); +#28278 = CARTESIAN_POINT('',(-0.925,1.05,0.)); +#28279 = VECTOR('',#28280,1.); +#28280 = DIRECTION('',(0.,0.,1.)); +#28281 = ORIENTED_EDGE('',*,*,#28282,.T.); +#28282 = EDGE_CURVE('',#28275,#28283,#28285,.T.); +#28283 = VERTEX_POINT('',#28284); +#28284 = CARTESIAN_POINT('',(0.925,1.05,0.6)); +#28285 = LINE('',#28286,#28287); +#28286 = CARTESIAN_POINT('',(-0.925,1.05,0.6)); +#28287 = VECTOR('',#28288,1.); +#28288 = DIRECTION('',(1.,0.,0.)); +#28289 = ORIENTED_EDGE('',*,*,#28290,.F.); +#28290 = EDGE_CURVE('',#27568,#28283,#28291,.T.); +#28291 = LINE('',#28292,#28293); +#28292 = CARTESIAN_POINT('',(0.925,1.05,0.)); +#28293 = VECTOR('',#28294,1.); +#28294 = DIRECTION('',(0.,0.,1.)); +#28295 = PLANE('',#28296); +#28296 = AXIS2_PLACEMENT_3D('',#28297,#28298,#28299); +#28297 = CARTESIAN_POINT('',(1.5,1.05,0.)); +#28298 = DIRECTION('',(0.,-1.,0.)); +#28299 = DIRECTION('',(-1.,0.,0.)); +#28300 = ADVANCED_FACE('',(#28301),#28335,.T.); +#28301 = FACE_BOUND('',#28302,.T.); +#28302 = EDGE_LOOP('',(#28303,#28311,#28312,#28313,#28321,#28329)); +#28303 = ORIENTED_EDGE('',*,*,#28304,.F.); +#28304 = EDGE_CURVE('',#28283,#28305,#28307,.T.); +#28305 = VERTEX_POINT('',#28306); +#28306 = CARTESIAN_POINT('',(0.925,1.13,0.6)); +#28307 = LINE('',#28308,#28309); +#28308 = CARTESIAN_POINT('',(0.925,1.05,0.6)); +#28309 = VECTOR('',#28310,1.); +#28310 = DIRECTION('',(0.,1.,0.)); +#28311 = ORIENTED_EDGE('',*,*,#28290,.F.); +#28312 = ORIENTED_EDGE('',*,*,#27575,.T.); +#28313 = ORIENTED_EDGE('',*,*,#28314,.T.); +#28314 = EDGE_CURVE('',#27576,#28315,#28317,.T.); +#28315 = VERTEX_POINT('',#28316); +#28316 = CARTESIAN_POINT('',(0.925,1.25,0.1)); +#28317 = LINE('',#28318,#28319); +#28318 = CARTESIAN_POINT('',(0.925,1.25,0.)); +#28319 = VECTOR('',#28320,1.); +#28320 = DIRECTION('',(0.,0.,1.)); +#28321 = ORIENTED_EDGE('',*,*,#28322,.F.); +#28322 = EDGE_CURVE('',#28323,#28315,#28325,.T.); +#28323 = VERTEX_POINT('',#28324); +#28324 = CARTESIAN_POINT('',(0.925,1.13,0.1)); +#28325 = LINE('',#28326,#28327); +#28326 = CARTESIAN_POINT('',(0.925,1.13,0.1)); +#28327 = VECTOR('',#28328,1.); +#28328 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28329 = ORIENTED_EDGE('',*,*,#28330,.T.); +#28330 = EDGE_CURVE('',#28323,#28305,#28331,.T.); +#28331 = LINE('',#28332,#28333); +#28332 = CARTESIAN_POINT('',(0.925,1.13,0.1)); +#28333 = VECTOR('',#28334,1.); +#28334 = DIRECTION('',(0.,0.,1.)); +#28335 = PLANE('',#28336); +#28336 = AXIS2_PLACEMENT_3D('',#28337,#28338,#28339); +#28337 = CARTESIAN_POINT('',(0.925,1.05,0.)); +#28338 = DIRECTION('',(1.,0.,0.)); +#28339 = DIRECTION('',(0.,0.,1.)); +#28340 = ADVANCED_FACE('',(#28341),#28375,.T.); +#28341 = FACE_BOUND('',#28342,.T.); +#28342 = EDGE_LOOP('',(#28343,#28344,#28352,#28360,#28368,#28374)); +#28343 = ORIENTED_EDGE('',*,*,#27583,.F.); +#28344 = ORIENTED_EDGE('',*,*,#28345,.T.); +#28345 = EDGE_CURVE('',#27584,#28346,#28348,.T.); +#28346 = VERTEX_POINT('',#28347); +#28347 = CARTESIAN_POINT('',(-0.925,1.25,0.1)); +#28348 = LINE('',#28349,#28350); +#28349 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#28350 = VECTOR('',#28351,1.); +#28351 = DIRECTION('',(0.,0.,1.)); +#28352 = ORIENTED_EDGE('',*,*,#28353,.T.); +#28353 = EDGE_CURVE('',#28346,#28354,#28356,.T.); +#28354 = VERTEX_POINT('',#28355); +#28355 = CARTESIAN_POINT('',(-0.925,1.25,0.6)); +#28356 = LINE('',#28357,#28358); +#28357 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#28358 = VECTOR('',#28359,1.); +#28359 = DIRECTION('',(0.,0.,1.)); +#28360 = ORIENTED_EDGE('',*,*,#28361,.T.); +#28361 = EDGE_CURVE('',#28354,#28362,#28364,.T.); +#28362 = VERTEX_POINT('',#28363); +#28363 = CARTESIAN_POINT('',(0.925,1.25,0.6)); +#28364 = LINE('',#28365,#28366); +#28365 = CARTESIAN_POINT('',(-0.925,1.25,0.6)); +#28366 = VECTOR('',#28367,1.); +#28367 = DIRECTION('',(1.,0.,0.)); +#28368 = ORIENTED_EDGE('',*,*,#28369,.F.); +#28369 = EDGE_CURVE('',#28315,#28362,#28370,.T.); +#28370 = LINE('',#28371,#28372); +#28371 = CARTESIAN_POINT('',(0.925,1.25,0.)); +#28372 = VECTOR('',#28373,1.); +#28373 = DIRECTION('',(0.,0.,1.)); +#28374 = ORIENTED_EDGE('',*,*,#28314,.F.); +#28375 = PLANE('',#28376); +#28376 = AXIS2_PLACEMENT_3D('',#28377,#28378,#28379); +#28377 = CARTESIAN_POINT('',(-0.925,1.25,0.)); +#28378 = DIRECTION('',(0.,1.,0.)); +#28379 = DIRECTION('',(0.,-0.,1.)); +#28380 = ADVANCED_FACE('',(#28381),#28408,.F.); +#28381 = FACE_BOUND('',#28382,.F.); +#28382 = EDGE_LOOP('',(#28383,#28391,#28392,#28393,#28394,#28402)); +#28383 = ORIENTED_EDGE('',*,*,#28384,.F.); +#28384 = EDGE_CURVE('',#28275,#28385,#28387,.T.); +#28385 = VERTEX_POINT('',#28386); +#28386 = CARTESIAN_POINT('',(-0.925,1.13,0.6)); +#28387 = LINE('',#28388,#28389); +#28388 = CARTESIAN_POINT('',(-0.925,1.05,0.6)); +#28389 = VECTOR('',#28390,1.); +#28390 = DIRECTION('',(0.,1.,0.)); +#28391 = ORIENTED_EDGE('',*,*,#28274,.F.); +#28392 = ORIENTED_EDGE('',*,*,#27591,.T.); +#28393 = ORIENTED_EDGE('',*,*,#28345,.T.); +#28394 = ORIENTED_EDGE('',*,*,#28395,.F.); +#28395 = EDGE_CURVE('',#28396,#28346,#28398,.T.); +#28396 = VERTEX_POINT('',#28397); +#28397 = CARTESIAN_POINT('',(-0.925,1.13,0.1)); +#28398 = LINE('',#28399,#28400); +#28399 = CARTESIAN_POINT('',(-0.925,1.13,0.1)); +#28400 = VECTOR('',#28401,1.); +#28401 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28402 = ORIENTED_EDGE('',*,*,#28403,.T.); +#28403 = EDGE_CURVE('',#28396,#28385,#28404,.T.); +#28404 = LINE('',#28405,#28406); +#28405 = CARTESIAN_POINT('',(-0.925,1.13,0.1)); +#28406 = VECTOR('',#28407,1.); +#28407 = DIRECTION('',(0.,0.,1.)); +#28408 = PLANE('',#28409); +#28409 = AXIS2_PLACEMENT_3D('',#28410,#28411,#28412); +#28410 = CARTESIAN_POINT('',(-0.925,1.05,0.)); +#28411 = DIRECTION('',(1.,0.,0.)); +#28412 = DIRECTION('',(0.,0.,1.)); +#28413 = ADVANCED_FACE('',(#28414),#28439,.T.); +#28414 = FACE_BOUND('',#28415,.F.); +#28415 = EDGE_LOOP('',(#28416,#28426,#28432,#28433)); +#28416 = ORIENTED_EDGE('',*,*,#28417,.T.); +#28417 = EDGE_CURVE('',#28418,#28420,#28422,.T.); +#28418 = VERTEX_POINT('',#28419); +#28419 = CARTESIAN_POINT('',(-1.5,-1.13,0.1)); +#28420 = VERTEX_POINT('',#28421); +#28421 = CARTESIAN_POINT('',(-1.5,-1.25,0.1)); +#28422 = LINE('',#28423,#28424); +#28423 = CARTESIAN_POINT('',(-1.5,-1.13,0.1)); +#28424 = VECTOR('',#28425,1.); +#28425 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#28426 = ORIENTED_EDGE('',*,*,#28427,.T.); +#28427 = EDGE_CURVE('',#28420,#27638,#28428,.T.); +#28428 = LINE('',#28429,#28430); +#28429 = CARTESIAN_POINT('',(-1.5,-1.25,0.1)); +#28430 = VECTOR('',#28431,1.); +#28431 = DIRECTION('',(1.,-2.22044604925E-16,4.827056628805E-17)); +#28432 = ORIENTED_EDGE('',*,*,#27663,.F.); +#28433 = ORIENTED_EDGE('',*,*,#28434,.F.); +#28434 = EDGE_CURVE('',#28418,#27656,#28435,.T.); +#28435 = LINE('',#28436,#28437); +#28436 = CARTESIAN_POINT('',(-1.5,-1.13,0.1)); +#28437 = VECTOR('',#28438,1.); +#28438 = DIRECTION('',(1.,-2.22044604925E-16,4.827056628805E-17)); +#28439 = PLANE('',#28440); +#28440 = AXIS2_PLACEMENT_3D('',#28441,#28442,#28443); +#28441 = CARTESIAN_POINT('',(-1.5,-1.13,0.1)); +#28442 = DIRECTION('',(4.827056628805E-17,-1.071821882094E-32,-1.)); +#28443 = DIRECTION('',(-1.,2.22044604925E-16,-4.827056628805E-17)); +#28444 = ADVANCED_FACE('',(#28445),#28488,.T.); +#28445 = FACE_BOUND('',#28446,.T.); +#28446 = EDGE_LOOP('',(#28447,#28453,#28454,#28455,#28463,#28469,#28470, + #28471,#28472,#28473,#28479,#28480,#28481,#28487)); +#28447 = ORIENTED_EDGE('',*,*,#28448,.T.); +#28448 = EDGE_CURVE('',#27935,#27888,#28449,.T.); +#28449 = LINE('',#28450,#28451); +#28450 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#28451 = VECTOR('',#28452,1.); +#28452 = DIRECTION('',(0.,0.,-1.)); +#28453 = ORIENTED_EDGE('',*,*,#27887,.T.); +#28454 = ORIENTED_EDGE('',*,*,#27871,.T.); +#28455 = ORIENTED_EDGE('',*,*,#28456,.T.); +#28456 = EDGE_CURVE('',#27737,#28457,#28459,.T.); +#28457 = VERTEX_POINT('',#28458); +#28458 = CARTESIAN_POINT('',(1.5,-1.13,0.1)); +#28459 = LINE('',#28460,#28461); +#28460 = CARTESIAN_POINT('',(1.5,-1.13,0.6)); +#28461 = VECTOR('',#28462,1.); +#28462 = DIRECTION('',(0.,0.,-1.)); +#28463 = ORIENTED_EDGE('',*,*,#28464,.T.); +#28464 = EDGE_CURVE('',#28457,#27713,#28465,.T.); +#28465 = LINE('',#28466,#28467); +#28466 = CARTESIAN_POINT('',(1.5,-1.13,0.1)); +#28467 = VECTOR('',#28468,1.); +#28468 = DIRECTION('',(-1.,2.22044604925E-16,4.827056628805E-17)); +#28469 = ORIENTED_EDGE('',*,*,#27712,.T.); +#28470 = ORIENTED_EDGE('',*,*,#27678,.T.); +#28471 = ORIENTED_EDGE('',*,*,#27655,.F.); +#28472 = ORIENTED_EDGE('',*,*,#28434,.F.); +#28473 = ORIENTED_EDGE('',*,*,#28474,.F.); +#28474 = EDGE_CURVE('',#27990,#28418,#28475,.T.); +#28475 = LINE('',#28476,#28477); +#28476 = CARTESIAN_POINT('',(-1.5,-1.13,0.6)); +#28477 = VECTOR('',#28478,1.); +#28478 = DIRECTION('',(0.,0.,-1.)); +#28479 = ORIENTED_EDGE('',*,*,#27999,.F.); +#28480 = ORIENTED_EDGE('',*,*,#27966,.F.); +#28481 = ORIENTED_EDGE('',*,*,#28482,.F.); +#28482 = EDGE_CURVE('',#27927,#27967,#28483,.T.); +#28483 = LINE('',#28484,#28485); +#28484 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#28485 = VECTOR('',#28486,1.); +#28486 = DIRECTION('',(0.,0.,-1.)); +#28487 = ORIENTED_EDGE('',*,*,#27934,.T.); +#28488 = PLANE('',#28489); +#28489 = AXIS2_PLACEMENT_3D('',#28490,#28491,#28492); +#28490 = CARTESIAN_POINT('',(0.816633064516,-1.13,0.656633064516)); +#28491 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#28492 = DIRECTION('',(0.,0.,-1.)); +#28493 = ADVANCED_FACE('',(#28494),#28512,.T.); +#28494 = FACE_BOUND('',#28495,.T.); +#28495 = EDGE_LOOP('',(#28496,#28504,#28510,#28511)); +#28496 = ORIENTED_EDGE('',*,*,#28497,.T.); +#28497 = EDGE_CURVE('',#28457,#28498,#28500,.T.); +#28498 = VERTEX_POINT('',#28499); +#28499 = CARTESIAN_POINT('',(1.5,-1.25,0.1)); +#28500 = LINE('',#28501,#28502); +#28501 = CARTESIAN_POINT('',(1.5,-1.13,0.1)); +#28502 = VECTOR('',#28503,1.); +#28503 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#28504 = ORIENTED_EDGE('',*,*,#28505,.T.); +#28505 = EDGE_CURVE('',#28498,#27702,#28506,.T.); +#28506 = LINE('',#28507,#28508); +#28507 = CARTESIAN_POINT('',(1.5,-1.25,0.1)); +#28508 = VECTOR('',#28509,1.); +#28509 = DIRECTION('',(-1.,2.22044604925E-16,4.827056628805E-17)); +#28510 = ORIENTED_EDGE('',*,*,#27720,.F.); +#28511 = ORIENTED_EDGE('',*,*,#28464,.F.); +#28512 = PLANE('',#28513); +#28513 = AXIS2_PLACEMENT_3D('',#28514,#28515,#28516); +#28514 = CARTESIAN_POINT('',(1.5,-1.13,0.1)); +#28515 = DIRECTION('',(-4.827056628805E-17,1.071821882094E-32,-1.)); +#28516 = DIRECTION('',(-1.,2.22044604925E-16,4.827056628805E-17)); +#28517 = ADVANCED_FACE('',(#28518),#28536,.F.); +#28518 = FACE_BOUND('',#28519,.F.); +#28519 = EDGE_LOOP('',(#28520,#28521,#28522,#28530)); +#28520 = ORIENTED_EDGE('',*,*,#28200,.F.); +#28521 = ORIENTED_EDGE('',*,*,#27847,.F.); +#28522 = ORIENTED_EDGE('',*,*,#28523,.T.); +#28523 = EDGE_CURVE('',#27840,#28524,#28526,.T.); +#28524 = VERTEX_POINT('',#28525); +#28525 = CARTESIAN_POINT('',(2.,-0.7,0.1)); +#28526 = LINE('',#28527,#28528); +#28527 = CARTESIAN_POINT('',(1.4,-0.7,0.1)); +#28528 = VECTOR('',#28529,1.); +#28529 = DIRECTION('',(1.,0.,0.)); +#28530 = ORIENTED_EDGE('',*,*,#28531,.F.); +#28531 = EDGE_CURVE('',#28201,#28524,#28532,.T.); +#28532 = LINE('',#28533,#28534); +#28533 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#28534 = VECTOR('',#28535,1.); +#28535 = DIRECTION('',(0.,0.,1.)); +#28536 = PLANE('',#28537); +#28537 = AXIS2_PLACEMENT_3D('',#28538,#28539,#28540); +#28538 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#28539 = DIRECTION('',(0.,1.,0.)); +#28540 = DIRECTION('',(1.,0.,0.)); +#28541 = ADVANCED_FACE('',(#28542),#28560,.T.); +#28542 = FACE_BOUND('',#28543,.T.); +#28543 = EDGE_LOOP('',(#28544,#28545,#28546,#28554)); +#28544 = ORIENTED_EDGE('',*,*,#27839,.F.); +#28545 = ORIENTED_EDGE('',*,*,#28523,.T.); +#28546 = ORIENTED_EDGE('',*,*,#28547,.T.); +#28547 = EDGE_CURVE('',#28524,#28548,#28550,.T.); +#28548 = VERTEX_POINT('',#28549); +#28549 = CARTESIAN_POINT('',(2.,0.7,0.1)); +#28550 = LINE('',#28551,#28552); +#28551 = CARTESIAN_POINT('',(2.,-0.7,0.1)); +#28552 = VECTOR('',#28553,1.); +#28553 = DIRECTION('',(0.,1.,0.)); +#28554 = ORIENTED_EDGE('',*,*,#28555,.T.); +#28555 = EDGE_CURVE('',#28548,#27832,#28556,.T.); +#28556 = LINE('',#28557,#28558); +#28557 = CARTESIAN_POINT('',(2.,0.7,0.1)); +#28558 = VECTOR('',#28559,1.); +#28559 = DIRECTION('',(-1.,0.,0.)); +#28560 = PLANE('',#28561); +#28561 = AXIS2_PLACEMENT_3D('',#28562,#28563,#28564); +#28562 = CARTESIAN_POINT('',(1.7,0.,0.1)); +#28563 = DIRECTION('',(0.,0.,1.)); +#28564 = DIRECTION('',(1.,0.,-0.)); +#28565 = ADVANCED_FACE('',(#28566),#28577,.F.); +#28566 = FACE_BOUND('',#28567,.F.); +#28567 = EDGE_LOOP('',(#28568,#28569,#28575,#28576)); +#28568 = ORIENTED_EDGE('',*,*,#28216,.F.); +#28569 = ORIENTED_EDGE('',*,*,#28570,.T.); +#28570 = EDGE_CURVE('',#28209,#28548,#28571,.T.); +#28571 = LINE('',#28572,#28573); +#28572 = CARTESIAN_POINT('',(2.,0.7,0.)); +#28573 = VECTOR('',#28574,1.); +#28574 = DIRECTION('',(0.,0.,1.)); +#28575 = ORIENTED_EDGE('',*,*,#28555,.T.); +#28576 = ORIENTED_EDGE('',*,*,#27831,.F.); +#28577 = PLANE('',#28578); +#28578 = AXIS2_PLACEMENT_3D('',#28579,#28580,#28581); +#28579 = CARTESIAN_POINT('',(2.,0.7,0.)); +#28580 = DIRECTION('',(0.,-1.,0.)); +#28581 = DIRECTION('',(-1.,0.,0.)); +#28582 = ADVANCED_FACE('',(#28583),#28601,.F.); +#28583 = FACE_BOUND('',#28584,.T.); +#28584 = EDGE_LOOP('',(#28585,#28586,#28587,#28595)); +#28585 = ORIENTED_EDGE('',*,*,#27816,.F.); +#28586 = ORIENTED_EDGE('',*,*,#28234,.T.); +#28587 = ORIENTED_EDGE('',*,*,#28588,.T.); +#28588 = EDGE_CURVE('',#28235,#28589,#28591,.T.); +#28589 = VERTEX_POINT('',#28590); +#28590 = CARTESIAN_POINT('',(1.225,1.13,0.6)); +#28591 = LINE('',#28592,#28593); +#28592 = CARTESIAN_POINT('',(1.225,1.05,0.6)); +#28593 = VECTOR('',#28594,1.); +#28594 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28595 = ORIENTED_EDGE('',*,*,#28596,.T.); +#28596 = EDGE_CURVE('',#28589,#27809,#28597,.T.); +#28597 = LINE('',#28598,#28599); +#28598 = CARTESIAN_POINT('',(1.225,1.13,0.6)); +#28599 = VECTOR('',#28600,1.); +#28600 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28601 = PLANE('',#28602); +#28602 = AXIS2_PLACEMENT_3D('',#28603,#28604,#28605); +#28603 = CARTESIAN_POINT('',(1.5,1.05,0.6)); +#28604 = DIRECTION('',(0.,0.,1.)); +#28605 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#28606 = ADVANCED_FACE('',(#28607),#28632,.T.); +#28607 = FACE_BOUND('',#28608,.F.); +#28608 = EDGE_LOOP('',(#28609,#28610,#28618,#28626)); +#28609 = ORIENTED_EDGE('',*,*,#27808,.T.); +#28610 = ORIENTED_EDGE('',*,*,#28611,.T.); +#28611 = EDGE_CURVE('',#27801,#28612,#28614,.T.); +#28612 = VERTEX_POINT('',#28613); +#28613 = CARTESIAN_POINT('',(1.5,1.25,0.1)); +#28614 = LINE('',#28615,#28616); +#28615 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#28616 = VECTOR('',#28617,1.); +#28617 = DIRECTION('',(0.,0.,-1.)); +#28618 = ORIENTED_EDGE('',*,*,#28619,.F.); +#28619 = EDGE_CURVE('',#28620,#28612,#28622,.T.); +#28620 = VERTEX_POINT('',#28621); +#28621 = CARTESIAN_POINT('',(1.5,1.13,0.1)); +#28622 = LINE('',#28623,#28624); +#28623 = CARTESIAN_POINT('',(1.5,1.13,0.1)); +#28624 = VECTOR('',#28625,1.); +#28625 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#28626 = ORIENTED_EDGE('',*,*,#28627,.F.); +#28627 = EDGE_CURVE('',#27809,#28620,#28628,.T.); +#28628 = LINE('',#28629,#28630); +#28629 = CARTESIAN_POINT('',(1.5,1.13,0.6)); +#28630 = VECTOR('',#28631,1.); +#28631 = DIRECTION('',(0.,0.,-1.)); +#28632 = PLANE('',#28633); +#28633 = AXIS2_PLACEMENT_3D('',#28634,#28635,#28636); +#28634 = CARTESIAN_POINT('',(1.5,1.13,0.6)); +#28635 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#28636 = DIRECTION('',(0.,0.,1.)); +#28637 = ADVANCED_FACE('',(#28638),#28663,.F.); +#28638 = FACE_BOUND('',#28639,.T.); +#28639 = EDGE_LOOP('',(#28640,#28648,#28656,#28662)); +#28640 = ORIENTED_EDGE('',*,*,#28641,.T.); +#28641 = EDGE_CURVE('',#27801,#28642,#28644,.T.); +#28642 = VERTEX_POINT('',#28643); +#28643 = CARTESIAN_POINT('',(1.225,1.25,0.6)); +#28644 = LINE('',#28645,#28646); +#28645 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#28646 = VECTOR('',#28647,1.); +#28647 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28648 = ORIENTED_EDGE('',*,*,#28649,.T.); +#28649 = EDGE_CURVE('',#28642,#28650,#28652,.T.); +#28650 = VERTEX_POINT('',#28651); +#28651 = CARTESIAN_POINT('',(1.225,1.25,0.63)); +#28652 = LINE('',#28653,#28654); +#28653 = CARTESIAN_POINT('',(1.225,1.25,0.6)); +#28654 = VECTOR('',#28655,1.); +#28655 = DIRECTION('',(0.,0.,1.)); +#28656 = ORIENTED_EDGE('',*,*,#28657,.F.); +#28657 = EDGE_CURVE('',#27793,#28650,#28658,.T.); +#28658 = LINE('',#28659,#28660); +#28659 = CARTESIAN_POINT('',(1.5,1.25,0.63)); +#28660 = VECTOR('',#28661,1.); +#28661 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28662 = ORIENTED_EDGE('',*,*,#27800,.F.); +#28663 = PLANE('',#28664); +#28664 = AXIS2_PLACEMENT_3D('',#28665,#28666,#28667); +#28665 = CARTESIAN_POINT('',(1.5,1.25,0.6)); +#28666 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#28667 = DIRECTION('',(0.,0.,-1.)); +#28668 = ADVANCED_FACE('',(#28669),#28695,.F.); +#28669 = FACE_BOUND('',#28670,.T.); +#28670 = EDGE_LOOP('',(#28671,#28672,#28680,#28688,#28694)); +#28671 = ORIENTED_EDGE('',*,*,#28657,.T.); +#28672 = ORIENTED_EDGE('',*,*,#28673,.T.); +#28673 = EDGE_CURVE('',#28650,#28674,#28676,.T.); +#28674 = VERTEX_POINT('',#28675); +#28675 = CARTESIAN_POINT('',(1.225,1.13,0.99)); +#28676 = LINE('',#28677,#28678); +#28677 = CARTESIAN_POINT('',(1.225,1.25,0.63)); +#28678 = VECTOR('',#28679,1.); +#28679 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#28680 = ORIENTED_EDGE('',*,*,#28681,.T.); +#28681 = EDGE_CURVE('',#28674,#28682,#28684,.T.); +#28682 = VERTEX_POINT('',#28683); +#28683 = CARTESIAN_POINT('',(1.225,1.1,1.08)); +#28684 = LINE('',#28685,#28686); +#28685 = CARTESIAN_POINT('',(1.225,1.25,0.63)); +#28686 = VECTOR('',#28687,1.); +#28687 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#28688 = ORIENTED_EDGE('',*,*,#28689,.F.); +#28689 = EDGE_CURVE('',#27785,#28682,#28690,.T.); +#28690 = LINE('',#28691,#28692); +#28691 = CARTESIAN_POINT('',(1.5,1.1,1.08)); +#28692 = VECTOR('',#28693,1.); +#28693 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#28694 = ORIENTED_EDGE('',*,*,#27792,.F.); +#28695 = PLANE('',#28696); +#28696 = AXIS2_PLACEMENT_3D('',#28697,#28698,#28699); +#28697 = CARTESIAN_POINT('',(1.5,1.25,0.63)); +#28698 = DIRECTION('',(-1.053250040572E-16,-0.948683298051, + -0.316227766017)); +#28699 = DIRECTION('',(3.510833468575E-17,0.316227766017,-0.948683298051 + )); +#28700 = ADVANCED_FACE('',(#28701),#28725,.T.); +#28701 = FACE_BOUND('',#28702,.T.); +#28702 = EDGE_LOOP('',(#28703,#28711,#28712,#28713,#28719)); +#28703 = ORIENTED_EDGE('',*,*,#28704,.F.); +#28704 = EDGE_CURVE('',#27777,#28705,#28707,.T.); +#28705 = VERTEX_POINT('',#28706); +#28706 = CARTESIAN_POINT('',(1.225,1.,1.08)); +#28707 = LINE('',#28708,#28709); +#28708 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#28709 = VECTOR('',#28710,1.); +#28710 = DIRECTION('',(-1.,0.,0.)); +#28711 = ORIENTED_EDGE('',*,*,#27784,.F.); +#28712 = ORIENTED_EDGE('',*,*,#28689,.T.); +#28713 = ORIENTED_EDGE('',*,*,#28714,.T.); +#28714 = EDGE_CURVE('',#28682,#28243,#28715,.T.); +#28715 = LINE('',#28716,#28717); +#28716 = CARTESIAN_POINT('',(1.225,1.1,1.08)); +#28717 = VECTOR('',#28718,1.); +#28718 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#28719 = ORIENTED_EDGE('',*,*,#28720,.T.); +#28720 = EDGE_CURVE('',#28243,#28705,#28721,.T.); +#28721 = LINE('',#28722,#28723); +#28722 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#28723 = VECTOR('',#28724,1.); +#28724 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#28725 = PLANE('',#28726); +#28726 = AXIS2_PLACEMENT_3D('',#28727,#28728,#28729); +#28727 = CARTESIAN_POINT('',(0.,0.,1.08)); +#28728 = DIRECTION('',(0.,0.,1.)); +#28729 = DIRECTION('',(1.,0.,-0.)); +#28730 = ADVANCED_FACE('',(#28731),#28756,.F.); +#28731 = FACE_BOUND('',#28732,.F.); +#28732 = EDGE_LOOP('',(#28733,#28741,#28749,#28755)); +#28733 = ORIENTED_EDGE('',*,*,#28734,.T.); +#28734 = EDGE_CURVE('',#27769,#28735,#28737,.T.); +#28735 = VERTEX_POINT('',#28736); +#28736 = CARTESIAN_POINT('',(1.5,-1.,1.2)); +#28737 = LINE('',#28738,#28739); +#28738 = CARTESIAN_POINT('',(1.5,-1.,1.08)); +#28739 = VECTOR('',#28740,1.); +#28740 = DIRECTION('',(0.,0.,1.)); +#28741 = ORIENTED_EDGE('',*,*,#28742,.T.); +#28742 = EDGE_CURVE('',#28735,#28743,#28745,.T.); +#28743 = VERTEX_POINT('',#28744); +#28744 = CARTESIAN_POINT('',(1.5,1.,1.2)); +#28745 = LINE('',#28746,#28747); +#28746 = CARTESIAN_POINT('',(1.5,-1.,1.2)); +#28747 = VECTOR('',#28748,1.); +#28748 = DIRECTION('',(0.,1.,0.)); +#28749 = ORIENTED_EDGE('',*,*,#28750,.F.); +#28750 = EDGE_CURVE('',#27777,#28743,#28751,.T.); +#28751 = LINE('',#28752,#28753); +#28752 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#28753 = VECTOR('',#28754,1.); +#28754 = DIRECTION('',(0.,0.,1.)); +#28755 = ORIENTED_EDGE('',*,*,#27776,.F.); +#28756 = PLANE('',#28757); +#28757 = AXIS2_PLACEMENT_3D('',#28758,#28759,#28760); +#28758 = CARTESIAN_POINT('',(1.5,-1.,1.08)); +#28759 = DIRECTION('',(-1.,0.,0.)); +#28760 = DIRECTION('',(0.,1.,0.)); +#28761 = ADVANCED_FACE('',(#28762),#28786,.T.); +#28762 = FACE_BOUND('',#28763,.T.); +#28763 = EDGE_LOOP('',(#28764,#28772,#28773,#28779,#28780)); +#28764 = ORIENTED_EDGE('',*,*,#28765,.F.); +#28765 = EDGE_CURVE('',#27418,#28766,#28768,.T.); +#28766 = VERTEX_POINT('',#28767); +#28767 = CARTESIAN_POINT('',(1.225,-1.,1.08)); +#28768 = LINE('',#28769,#28770); +#28769 = CARTESIAN_POINT('',(1.225,-1.25,1.08)); +#28770 = VECTOR('',#28771,1.); +#28771 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#28772 = ORIENTED_EDGE('',*,*,#27903,.F.); +#28773 = ORIENTED_EDGE('',*,*,#28774,.F.); +#28774 = EDGE_CURVE('',#27761,#27896,#28775,.T.); +#28775 = LINE('',#28776,#28777); +#28776 = CARTESIAN_POINT('',(1.5,-1.1,1.08)); +#28777 = VECTOR('',#28778,1.); +#28778 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#28779 = ORIENTED_EDGE('',*,*,#27768,.F.); +#28780 = ORIENTED_EDGE('',*,*,#28781,.F.); +#28781 = EDGE_CURVE('',#28766,#27769,#28782,.T.); +#28782 = LINE('',#28783,#28784); +#28783 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#28784 = VECTOR('',#28785,1.); +#28785 = DIRECTION('',(1.,0.,0.)); +#28786 = PLANE('',#28787); +#28787 = AXIS2_PLACEMENT_3D('',#28788,#28789,#28790); +#28788 = CARTESIAN_POINT('',(0.,0.,1.08)); +#28789 = DIRECTION('',(0.,0.,1.)); +#28790 = DIRECTION('',(1.,0.,-0.)); +#28791 = ADVANCED_FACE('',(#28792),#28811,.F.); +#28792 = FACE_BOUND('',#28793,.F.); +#28793 = EDGE_LOOP('',(#28794,#28802,#28808,#28809,#28810)); +#28794 = ORIENTED_EDGE('',*,*,#28795,.T.); +#28795 = EDGE_CURVE('',#27753,#28796,#28798,.T.); +#28796 = VERTEX_POINT('',#28797); +#28797 = CARTESIAN_POINT('',(1.225,-1.25,0.63)); +#28798 = LINE('',#28799,#28800); +#28799 = CARTESIAN_POINT('',(1.5,-1.25,0.63)); +#28800 = VECTOR('',#28801,1.); +#28801 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#28802 = ORIENTED_EDGE('',*,*,#28803,.T.); +#28803 = EDGE_CURVE('',#28796,#27888,#28804,.T.); +#28804 = LINE('',#28805,#28806); +#28805 = CARTESIAN_POINT('',(1.225,-1.25,0.63)); +#28806 = VECTOR('',#28807,1.); +#28807 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#28808 = ORIENTED_EDGE('',*,*,#27895,.T.); +#28809 = ORIENTED_EDGE('',*,*,#28774,.F.); +#28810 = ORIENTED_EDGE('',*,*,#27760,.F.); +#28811 = PLANE('',#28812); +#28812 = AXIS2_PLACEMENT_3D('',#28813,#28814,#28815); +#28813 = CARTESIAN_POINT('',(1.5,-1.25,0.63)); +#28814 = DIRECTION('',(2.106500081145E-16,0.948683298051,-0.316227766017 + )); +#28815 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#28816 = ADVANCED_FACE('',(#28817),#28835,.F.); +#28817 = FACE_BOUND('',#28818,.F.); +#28818 = EDGE_LOOP('',(#28819,#28827,#28833,#28834)); +#28819 = ORIENTED_EDGE('',*,*,#28820,.T.); +#28820 = EDGE_CURVE('',#27745,#28821,#28823,.T.); +#28821 = VERTEX_POINT('',#28822); +#28822 = CARTESIAN_POINT('',(1.225,-1.25,0.6)); +#28823 = LINE('',#28824,#28825); +#28824 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#28825 = VECTOR('',#28826,1.); +#28826 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#28827 = ORIENTED_EDGE('',*,*,#28828,.T.); +#28828 = EDGE_CURVE('',#28821,#28796,#28829,.T.); +#28829 = LINE('',#28830,#28831); +#28830 = CARTESIAN_POINT('',(1.225,-1.25,0.6)); +#28831 = VECTOR('',#28832,1.); +#28832 = DIRECTION('',(0.,0.,1.)); +#28833 = ORIENTED_EDGE('',*,*,#28795,.F.); +#28834 = ORIENTED_EDGE('',*,*,#27752,.F.); +#28835 = PLANE('',#28836); +#28836 = AXIS2_PLACEMENT_3D('',#28837,#28838,#28839); +#28837 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#28838 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#28839 = DIRECTION('',(0.,-0.,1.)); +#28840 = ADVANCED_FACE('',(#28841),#28852,.T.); +#28841 = FACE_BOUND('',#28842,.T.); +#28842 = EDGE_LOOP('',(#28843,#28844,#28850,#28851)); +#28843 = ORIENTED_EDGE('',*,*,#27744,.T.); +#28844 = ORIENTED_EDGE('',*,*,#28845,.T.); +#28845 = EDGE_CURVE('',#27745,#28498,#28846,.T.); +#28846 = LINE('',#28847,#28848); +#28847 = CARTESIAN_POINT('',(1.5,-1.25,0.6)); +#28848 = VECTOR('',#28849,1.); +#28849 = DIRECTION('',(0.,0.,-1.)); +#28850 = ORIENTED_EDGE('',*,*,#28497,.F.); +#28851 = ORIENTED_EDGE('',*,*,#28456,.F.); +#28852 = PLANE('',#28853); +#28853 = AXIS2_PLACEMENT_3D('',#28854,#28855,#28856); +#28854 = CARTESIAN_POINT('',(1.5,-1.13,0.6)); +#28855 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#28856 = DIRECTION('',(0.,0.,-1.)); +#28857 = ADVANCED_FACE('',(#28858),#28896,.T.); +#28858 = FACE_BOUND('',#28859,.T.); +#28859 = EDGE_LOOP('',(#28860,#28861,#28862,#28863,#28864,#28865,#28873, + #28881,#28890)); +#28860 = ORIENTED_EDGE('',*,*,#28803,.T.); +#28861 = ORIENTED_EDGE('',*,*,#28448,.F.); +#28862 = ORIENTED_EDGE('',*,*,#27942,.T.); +#28863 = ORIENTED_EDGE('',*,*,#27903,.T.); +#28864 = ORIENTED_EDGE('',*,*,#28765,.T.); +#28865 = ORIENTED_EDGE('',*,*,#28866,.T.); +#28866 = EDGE_CURVE('',#28766,#28867,#28869,.T.); +#28867 = VERTEX_POINT('',#28868); +#28868 = CARTESIAN_POINT('',(1.225,-1.,1.2)); +#28869 = LINE('',#28870,#28871); +#28870 = CARTESIAN_POINT('',(1.225,-1.,1.08)); +#28871 = VECTOR('',#28872,1.); +#28872 = DIRECTION('',(0.,0.,1.)); +#28873 = ORIENTED_EDGE('',*,*,#28874,.T.); +#28874 = EDGE_CURVE('',#28867,#28875,#28877,.T.); +#28875 = VERTEX_POINT('',#28876); +#28876 = CARTESIAN_POINT('',(1.225,-1.13,1.2)); +#28877 = LINE('',#28878,#28879); +#28878 = CARTESIAN_POINT('',(1.225,-1.,1.2)); +#28879 = VECTOR('',#28880,1.); +#28880 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#28881 = ORIENTED_EDGE('',*,*,#28882,.T.); +#28882 = EDGE_CURVE('',#28875,#28883,#28885,.T.); +#28883 = VERTEX_POINT('',#28884); +#28884 = CARTESIAN_POINT('',(1.225,-1.25,1.08)); +#28885 = CIRCLE('',#28886,0.12); +#28886 = AXIS2_PLACEMENT_3D('',#28887,#28888,#28889); +#28887 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#28888 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#28889 = DIRECTION('',(8.217301096051E-31,3.700743415417E-15,1.)); +#28890 = ORIENTED_EDGE('',*,*,#28891,.T.); +#28891 = EDGE_CURVE('',#28883,#28796,#28892,.T.); +#28892 = LINE('',#28893,#28894); +#28893 = CARTESIAN_POINT('',(1.225,-1.25,1.08)); +#28894 = VECTOR('',#28895,1.); +#28895 = DIRECTION('',(0.,0.,-1.)); +#28896 = PLANE('',#28897); +#28897 = AXIS2_PLACEMENT_3D('',#28898,#28899,#28900); +#28898 = CARTESIAN_POINT('',(1.225,-1.13,1.08)); +#28899 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#28900 = DIRECTION('',(0.,0.,-1.)); +#28901 = ADVANCED_FACE('',(#28902),#28954,.T.); +#28902 = FACE_BOUND('',#28903,.F.); +#28903 = EDGE_LOOP('',(#28904,#28912,#28913,#28914,#28915,#28923,#28931, + #28939,#28948)); +#28904 = ORIENTED_EDGE('',*,*,#28905,.T.); +#28905 = EDGE_CURVE('',#28906,#27967,#28908,.T.); +#28906 = VERTEX_POINT('',#28907); +#28907 = CARTESIAN_POINT('',(-1.225,-1.25,0.63)); +#28908 = LINE('',#28909,#28910); +#28909 = CARTESIAN_POINT('',(-1.225,-1.25,0.63)); +#28910 = VECTOR('',#28911,1.); +#28911 = DIRECTION('',(7.021666937149E-17,0.316227766017,0.948683298051) + ); +#28912 = ORIENTED_EDGE('',*,*,#28482,.F.); +#28913 = ORIENTED_EDGE('',*,*,#27926,.T.); +#28914 = ORIENTED_EDGE('',*,*,#27918,.T.); +#28915 = ORIENTED_EDGE('',*,*,#28916,.T.); +#28916 = EDGE_CURVE('',#27410,#28917,#28919,.T.); +#28917 = VERTEX_POINT('',#28918); +#28918 = CARTESIAN_POINT('',(-1.225,-1.,1.08)); +#28919 = LINE('',#28920,#28921); +#28920 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#28921 = VECTOR('',#28922,1.); +#28922 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#28923 = ORIENTED_EDGE('',*,*,#28924,.T.); +#28924 = EDGE_CURVE('',#28917,#28925,#28927,.T.); +#28925 = VERTEX_POINT('',#28926); +#28926 = CARTESIAN_POINT('',(-1.225,-1.,1.2)); +#28927 = LINE('',#28928,#28929); +#28928 = CARTESIAN_POINT('',(-1.225,-1.,1.08)); +#28929 = VECTOR('',#28930,1.); +#28930 = DIRECTION('',(0.,0.,1.)); +#28931 = ORIENTED_EDGE('',*,*,#28932,.T.); +#28932 = EDGE_CURVE('',#28925,#28933,#28935,.T.); +#28933 = VERTEX_POINT('',#28934); +#28934 = CARTESIAN_POINT('',(-1.225,-1.13,1.2)); +#28935 = LINE('',#28936,#28937); +#28936 = CARTESIAN_POINT('',(-1.225,-1.,1.2)); +#28937 = VECTOR('',#28938,1.); +#28938 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#28939 = ORIENTED_EDGE('',*,*,#28940,.T.); +#28940 = EDGE_CURVE('',#28933,#28941,#28943,.T.); +#28941 = VERTEX_POINT('',#28942); +#28942 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#28943 = CIRCLE('',#28944,0.12); +#28944 = AXIS2_PLACEMENT_3D('',#28945,#28946,#28947); +#28945 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#28946 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#28947 = DIRECTION('',(8.217301096051E-31,3.700743415417E-15,1.)); +#28948 = ORIENTED_EDGE('',*,*,#28949,.T.); +#28949 = EDGE_CURVE('',#28941,#28906,#28950,.T.); +#28950 = LINE('',#28951,#28952); +#28951 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#28952 = VECTOR('',#28953,1.); +#28953 = DIRECTION('',(0.,0.,-1.)); +#28954 = PLANE('',#28955); +#28955 = AXIS2_PLACEMENT_3D('',#28956,#28957,#28958); +#28956 = CARTESIAN_POINT('',(-1.225,-1.13,1.08)); +#28957 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#28958 = DIRECTION('',(0.,0.,1.)); +#28959 = ADVANCED_FACE('',(#28960),#28977,.F.); +#28960 = FACE_BOUND('',#28961,.T.); +#28961 = EDGE_LOOP('',(#28962,#28968,#28969,#28970,#28976)); +#28962 = ORIENTED_EDGE('',*,*,#28963,.T.); +#28963 = EDGE_CURVE('',#28079,#28906,#28964,.T.); +#28964 = LINE('',#28965,#28966); +#28965 = CARTESIAN_POINT('',(-1.5,-1.25,0.63)); +#28966 = VECTOR('',#28967,1.); +#28967 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#28968 = ORIENTED_EDGE('',*,*,#28905,.T.); +#28969 = ORIENTED_EDGE('',*,*,#27974,.T.); +#28970 = ORIENTED_EDGE('',*,*,#28971,.F.); +#28971 = EDGE_CURVE('',#28071,#27919,#28972,.T.); +#28972 = LINE('',#28973,#28974); +#28973 = CARTESIAN_POINT('',(-1.5,-1.1,1.08)); +#28974 = VECTOR('',#28975,1.); +#28975 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#28976 = ORIENTED_EDGE('',*,*,#28078,.F.); +#28977 = PLANE('',#28978); +#28978 = AXIS2_PLACEMENT_3D('',#28979,#28980,#28981); +#28979 = CARTESIAN_POINT('',(-1.5,-1.25,0.63)); +#28980 = DIRECTION('',(2.106500081145E-16,0.948683298051,-0.316227766017 + )); +#28981 = DIRECTION('',(-7.021666937149E-17,-0.316227766017, + -0.948683298051)); +#28982 = ADVANCED_FACE('',(#28983),#29001,.F.); +#28983 = FACE_BOUND('',#28984,.F.); +#28984 = EDGE_LOOP('',(#28985,#28986,#28987,#28995)); +#28985 = ORIENTED_EDGE('',*,*,#28134,.F.); +#28986 = ORIENTED_EDGE('',*,*,#28119,.F.); +#28987 = ORIENTED_EDGE('',*,*,#28988,.T.); +#28988 = EDGE_CURVE('',#28112,#28989,#28991,.T.); +#28989 = VERTEX_POINT('',#28990); +#28990 = CARTESIAN_POINT('',(-2.,0.7,0.1)); +#28991 = LINE('',#28992,#28993); +#28992 = CARTESIAN_POINT('',(-1.4,0.7,0.1)); +#28993 = VECTOR('',#28994,1.); +#28994 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28995 = ORIENTED_EDGE('',*,*,#28996,.F.); +#28996 = EDGE_CURVE('',#28135,#28989,#28997,.T.); +#28997 = LINE('',#28998,#28999); +#28998 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#28999 = VECTOR('',#29000,1.); +#29000 = DIRECTION('',(0.,0.,1.)); +#29001 = PLANE('',#29002); +#29002 = AXIS2_PLACEMENT_3D('',#29003,#29004,#29005); +#29003 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#29004 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#29005 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#29006 = ADVANCED_FACE('',(#29007),#29025,.T.); +#29007 = FACE_BOUND('',#29008,.T.); +#29008 = EDGE_LOOP('',(#29009,#29010,#29011,#29019)); +#29009 = ORIENTED_EDGE('',*,*,#28111,.F.); +#29010 = ORIENTED_EDGE('',*,*,#28988,.T.); +#29011 = ORIENTED_EDGE('',*,*,#29012,.T.); +#29012 = EDGE_CURVE('',#28989,#29013,#29015,.T.); +#29013 = VERTEX_POINT('',#29014); +#29014 = CARTESIAN_POINT('',(-2.,-0.7,0.1)); +#29015 = LINE('',#29016,#29017); +#29016 = CARTESIAN_POINT('',(-2.,0.7,0.1)); +#29017 = VECTOR('',#29018,1.); +#29018 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#29019 = ORIENTED_EDGE('',*,*,#29020,.T.); +#29020 = EDGE_CURVE('',#29013,#28104,#29021,.T.); +#29021 = LINE('',#29022,#29023); +#29022 = CARTESIAN_POINT('',(-2.,-0.7,0.1)); +#29023 = VECTOR('',#29024,1.); +#29024 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#29025 = PLANE('',#29026); +#29026 = AXIS2_PLACEMENT_3D('',#29027,#29028,#29029); +#29027 = CARTESIAN_POINT('',(-1.7,-3.673940397442E-17,0.1)); +#29028 = DIRECTION('',(0.,0.,1.)); +#29029 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#29030 = ADVANCED_FACE('',(#29031),#29042,.F.); +#29031 = FACE_BOUND('',#29032,.F.); +#29032 = EDGE_LOOP('',(#29033,#29034,#29040,#29041)); +#29033 = ORIENTED_EDGE('',*,*,#28150,.F.); +#29034 = ORIENTED_EDGE('',*,*,#29035,.T.); +#29035 = EDGE_CURVE('',#28143,#29013,#29036,.T.); +#29036 = LINE('',#29037,#29038); +#29037 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#29038 = VECTOR('',#29039,1.); +#29039 = DIRECTION('',(0.,0.,1.)); +#29040 = ORIENTED_EDGE('',*,*,#29020,.T.); +#29041 = ORIENTED_EDGE('',*,*,#28103,.F.); +#29042 = PLANE('',#29043); +#29043 = AXIS2_PLACEMENT_3D('',#29044,#29045,#29046); +#29044 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#29045 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#29046 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#29047 = ADVANCED_FACE('',(#29048),#29059,.T.); +#29048 = FACE_BOUND('',#29049,.F.); +#29049 = EDGE_LOOP('',(#29050,#29051,#29057,#29058)); +#29050 = ORIENTED_EDGE('',*,*,#28094,.T.); +#29051 = ORIENTED_EDGE('',*,*,#29052,.T.); +#29052 = EDGE_CURVE('',#28087,#28420,#29053,.T.); +#29053 = LINE('',#29054,#29055); +#29054 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#29055 = VECTOR('',#29056,1.); +#29056 = DIRECTION('',(0.,0.,-1.)); +#29057 = ORIENTED_EDGE('',*,*,#28417,.F.); +#29058 = ORIENTED_EDGE('',*,*,#28474,.F.); +#29059 = PLANE('',#29060); +#29060 = AXIS2_PLACEMENT_3D('',#29061,#29062,#29063); +#29061 = CARTESIAN_POINT('',(-1.5,-1.13,0.6)); +#29062 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#29063 = DIRECTION('',(0.,0.,1.)); +#29064 = ADVANCED_FACE('',(#29065),#29083,.F.); +#29065 = FACE_BOUND('',#29066,.T.); +#29066 = EDGE_LOOP('',(#29067,#29075,#29081,#29082)); +#29067 = ORIENTED_EDGE('',*,*,#29068,.T.); +#29068 = EDGE_CURVE('',#28087,#29069,#29071,.T.); +#29069 = VERTEX_POINT('',#29070); +#29070 = CARTESIAN_POINT('',(-1.225,-1.25,0.6)); +#29071 = LINE('',#29072,#29073); +#29072 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#29073 = VECTOR('',#29074,1.); +#29074 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#29075 = ORIENTED_EDGE('',*,*,#29076,.T.); +#29076 = EDGE_CURVE('',#29069,#28906,#29077,.T.); +#29077 = LINE('',#29078,#29079); +#29078 = CARTESIAN_POINT('',(-1.225,-1.25,0.6)); +#29079 = VECTOR('',#29080,1.); +#29080 = DIRECTION('',(0.,0.,1.)); +#29081 = ORIENTED_EDGE('',*,*,#28963,.F.); +#29082 = ORIENTED_EDGE('',*,*,#28086,.F.); +#29083 = PLANE('',#29084); +#29084 = AXIS2_PLACEMENT_3D('',#29085,#29086,#29087); +#29085 = CARTESIAN_POINT('',(-1.5,-1.25,0.6)); +#29086 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#29087 = DIRECTION('',(0.,0.,-1.)); +#29088 = ADVANCED_FACE('',(#29089),#29120,.T.); +#29089 = FACE_BOUND('',#29090,.T.); +#29090 = EDGE_LOOP('',(#29091,#29092,#29100,#29106,#29114)); +#29091 = ORIENTED_EDGE('',*,*,#28054,.T.); +#29092 = ORIENTED_EDGE('',*,*,#29093,.F.); +#29093 = EDGE_CURVE('',#29094,#28055,#29096,.T.); +#29094 = VERTEX_POINT('',#29095); +#29095 = CARTESIAN_POINT('',(-1.225,1.,1.08)); +#29096 = LINE('',#29097,#29098); +#29097 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#29098 = VECTOR('',#29099,1.); +#29099 = DIRECTION('',(-1.,0.,0.)); +#29100 = ORIENTED_EDGE('',*,*,#29101,.F.); +#29101 = EDGE_CURVE('',#28251,#29094,#29102,.T.); +#29102 = LINE('',#29103,#29104); +#29103 = CARTESIAN_POINT('',(-1.225,1.25,1.08)); +#29104 = VECTOR('',#29105,1.); +#29105 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29106 = ORIENTED_EDGE('',*,*,#29107,.F.); +#29107 = EDGE_CURVE('',#29108,#28251,#29110,.T.); +#29108 = VERTEX_POINT('',#29109); +#29109 = CARTESIAN_POINT('',(-1.225,1.1,1.08)); +#29110 = LINE('',#29111,#29112); +#29111 = CARTESIAN_POINT('',(-1.225,1.1,1.08)); +#29112 = VECTOR('',#29113,1.); +#29113 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29114 = ORIENTED_EDGE('',*,*,#29115,.F.); +#29115 = EDGE_CURVE('',#28047,#29108,#29116,.T.); +#29116 = LINE('',#29117,#29118); +#29117 = CARTESIAN_POINT('',(-1.5,1.1,1.08)); +#29118 = VECTOR('',#29119,1.); +#29119 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29120 = PLANE('',#29121); +#29121 = AXIS2_PLACEMENT_3D('',#29122,#29123,#29124); +#29122 = CARTESIAN_POINT('',(0.,0.,1.08)); +#29123 = DIRECTION('',(0.,0.,1.)); +#29124 = DIRECTION('',(1.,0.,-0.)); +#29125 = ADVANCED_FACE('',(#29126),#29151,.F.); +#29126 = FACE_BOUND('',#29127,.F.); +#29127 = EDGE_LOOP('',(#29128,#29136,#29144,#29150)); +#29128 = ORIENTED_EDGE('',*,*,#29129,.T.); +#29129 = EDGE_CURVE('',#28055,#29130,#29132,.T.); +#29130 = VERTEX_POINT('',#29131); +#29131 = CARTESIAN_POINT('',(-1.5,1.,1.2)); +#29132 = LINE('',#29133,#29134); +#29133 = CARTESIAN_POINT('',(-1.5,1.,1.08)); +#29134 = VECTOR('',#29135,1.); +#29135 = DIRECTION('',(0.,0.,1.)); +#29136 = ORIENTED_EDGE('',*,*,#29137,.T.); +#29137 = EDGE_CURVE('',#29130,#29138,#29140,.T.); +#29138 = VERTEX_POINT('',#29139); +#29139 = CARTESIAN_POINT('',(-1.5,-1.,1.2)); +#29140 = LINE('',#29141,#29142); +#29141 = CARTESIAN_POINT('',(-1.5,1.,1.2)); +#29142 = VECTOR('',#29143,1.); +#29143 = DIRECTION('',(0.,-1.,0.)); +#29144 = ORIENTED_EDGE('',*,*,#29145,.F.); +#29145 = EDGE_CURVE('',#28063,#29138,#29146,.T.); +#29146 = LINE('',#29147,#29148); +#29147 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#29148 = VECTOR('',#29149,1.); +#29149 = DIRECTION('',(0.,0.,1.)); +#29150 = ORIENTED_EDGE('',*,*,#28062,.F.); +#29151 = PLANE('',#29152); +#29152 = AXIS2_PLACEMENT_3D('',#29153,#29154,#29155); +#29153 = CARTESIAN_POINT('',(-1.5,1.,1.08)); +#29154 = DIRECTION('',(1.,0.,0.)); +#29155 = DIRECTION('',(0.,-1.,0.)); +#29156 = ADVANCED_FACE('',(#29157),#29169,.T.); +#29157 = FACE_BOUND('',#29158,.T.); +#29158 = EDGE_LOOP('',(#29159,#29160,#29161,#29167,#29168)); +#29159 = ORIENTED_EDGE('',*,*,#27918,.T.); +#29160 = ORIENTED_EDGE('',*,*,#28916,.T.); +#29161 = ORIENTED_EDGE('',*,*,#29162,.F.); +#29162 = EDGE_CURVE('',#28063,#28917,#29163,.T.); +#29163 = LINE('',#29164,#29165); +#29164 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#29165 = VECTOR('',#29166,1.); +#29166 = DIRECTION('',(1.,0.,0.)); +#29167 = ORIENTED_EDGE('',*,*,#28070,.T.); +#29168 = ORIENTED_EDGE('',*,*,#28971,.T.); +#29169 = PLANE('',#29170); +#29170 = AXIS2_PLACEMENT_3D('',#29171,#29172,#29173); +#29171 = CARTESIAN_POINT('',(0.,0.,1.08)); +#29172 = DIRECTION('',(0.,0.,1.)); +#29173 = DIRECTION('',(1.,0.,-0.)); +#29174 = ADVANCED_FACE('',(#29175),#29201,.F.); +#29175 = FACE_BOUND('',#29176,.F.); +#29176 = EDGE_LOOP('',(#29177,#29185,#29193,#29199,#29200)); +#29177 = ORIENTED_EDGE('',*,*,#29178,.T.); +#29178 = EDGE_CURVE('',#28039,#29179,#29181,.T.); +#29179 = VERTEX_POINT('',#29180); +#29180 = CARTESIAN_POINT('',(-1.225,1.25,0.63)); +#29181 = LINE('',#29182,#29183); +#29182 = CARTESIAN_POINT('',(-1.5,1.25,0.63)); +#29183 = VECTOR('',#29184,1.); +#29184 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29185 = ORIENTED_EDGE('',*,*,#29186,.T.); +#29186 = EDGE_CURVE('',#29179,#29187,#29189,.T.); +#29187 = VERTEX_POINT('',#29188); +#29188 = CARTESIAN_POINT('',(-1.225,1.13,0.99)); +#29189 = LINE('',#29190,#29191); +#29190 = CARTESIAN_POINT('',(-1.225,1.25,0.63)); +#29191 = VECTOR('',#29192,1.); +#29192 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#29193 = ORIENTED_EDGE('',*,*,#29194,.T.); +#29194 = EDGE_CURVE('',#29187,#29108,#29195,.T.); +#29195 = LINE('',#29196,#29197); +#29196 = CARTESIAN_POINT('',(-1.225,1.25,0.63)); +#29197 = VECTOR('',#29198,1.); +#29198 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#29199 = ORIENTED_EDGE('',*,*,#29115,.F.); +#29200 = ORIENTED_EDGE('',*,*,#28046,.F.); +#29201 = PLANE('',#29202); +#29202 = AXIS2_PLACEMENT_3D('',#29203,#29204,#29205); +#29203 = CARTESIAN_POINT('',(-1.5,1.25,0.63)); +#29204 = DIRECTION('',(-1.053250040572E-16,-0.948683298051, + -0.316227766017)); +#29205 = DIRECTION('',(-3.510833468575E-17,-0.316227766017, + 0.948683298051)); +#29206 = ADVANCED_FACE('',(#29207),#29225,.F.); +#29207 = FACE_BOUND('',#29208,.F.); +#29208 = EDGE_LOOP('',(#29209,#29217,#29223,#29224)); +#29209 = ORIENTED_EDGE('',*,*,#29210,.T.); +#29210 = EDGE_CURVE('',#28031,#29211,#29213,.T.); +#29211 = VERTEX_POINT('',#29212); +#29212 = CARTESIAN_POINT('',(-1.225,1.25,0.6)); +#29213 = LINE('',#29214,#29215); +#29214 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#29215 = VECTOR('',#29216,1.); +#29216 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29217 = ORIENTED_EDGE('',*,*,#29218,.T.); +#29218 = EDGE_CURVE('',#29211,#29179,#29219,.T.); +#29219 = LINE('',#29220,#29221); +#29220 = CARTESIAN_POINT('',(-1.225,1.25,0.6)); +#29221 = VECTOR('',#29222,1.); +#29222 = DIRECTION('',(0.,0.,1.)); +#29223 = ORIENTED_EDGE('',*,*,#29178,.F.); +#29224 = ORIENTED_EDGE('',*,*,#28038,.F.); +#29225 = PLANE('',#29226); +#29226 = AXIS2_PLACEMENT_3D('',#29227,#29228,#29229); +#29227 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#29228 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29229 = DIRECTION('',(0.,0.,1.)); +#29230 = ADVANCED_FACE('',(#29231),#29249,.F.); +#29231 = FACE_BOUND('',#29232,.F.); +#29232 = EDGE_LOOP('',(#29233,#29234,#29235,#29243)); +#29233 = ORIENTED_EDGE('',*,*,#28022,.F.); +#29234 = ORIENTED_EDGE('',*,*,#28266,.T.); +#29235 = ORIENTED_EDGE('',*,*,#29236,.T.); +#29236 = EDGE_CURVE('',#28259,#29237,#29239,.T.); +#29237 = VERTEX_POINT('',#29238); +#29238 = CARTESIAN_POINT('',(-1.225,1.13,0.6)); +#29239 = LINE('',#29240,#29241); +#29240 = CARTESIAN_POINT('',(-1.225,1.05,0.6)); +#29241 = VECTOR('',#29242,1.); +#29242 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29243 = ORIENTED_EDGE('',*,*,#29244,.T.); +#29244 = EDGE_CURVE('',#29237,#28023,#29245,.T.); +#29245 = LINE('',#29246,#29247); +#29246 = CARTESIAN_POINT('',(-1.225,1.13,0.6)); +#29247 = VECTOR('',#29248,1.); +#29248 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29249 = PLANE('',#29250); +#29250 = AXIS2_PLACEMENT_3D('',#29251,#29252,#29253); +#29251 = CARTESIAN_POINT('',(-1.5,1.05,0.6)); +#29252 = DIRECTION('',(0.,0.,1.)); +#29253 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#29254 = ADVANCED_FACE('',(#29255),#29280,.T.); +#29255 = FACE_BOUND('',#29256,.T.); +#29256 = EDGE_LOOP('',(#29257,#29258,#29266,#29274)); +#29257 = ORIENTED_EDGE('',*,*,#28030,.T.); +#29258 = ORIENTED_EDGE('',*,*,#29259,.T.); +#29259 = EDGE_CURVE('',#28031,#29260,#29262,.T.); +#29260 = VERTEX_POINT('',#29261); +#29261 = CARTESIAN_POINT('',(-1.5,1.25,0.1)); +#29262 = LINE('',#29263,#29264); +#29263 = CARTESIAN_POINT('',(-1.5,1.25,0.6)); +#29264 = VECTOR('',#29265,1.); +#29265 = DIRECTION('',(0.,0.,-1.)); +#29266 = ORIENTED_EDGE('',*,*,#29267,.F.); +#29267 = EDGE_CURVE('',#29268,#29260,#29270,.T.); +#29268 = VERTEX_POINT('',#29269); +#29269 = CARTESIAN_POINT('',(-1.5,1.13,0.1)); +#29270 = LINE('',#29271,#29272); +#29271 = CARTESIAN_POINT('',(-1.5,1.13,0.1)); +#29272 = VECTOR('',#29273,1.); +#29273 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29274 = ORIENTED_EDGE('',*,*,#29275,.F.); +#29275 = EDGE_CURVE('',#28023,#29268,#29276,.T.); +#29276 = LINE('',#29277,#29278); +#29277 = CARTESIAN_POINT('',(-1.5,1.13,0.6)); +#29278 = VECTOR('',#29279,1.); +#29279 = DIRECTION('',(0.,0.,-1.)); +#29280 = PLANE('',#29281); +#29281 = AXIS2_PLACEMENT_3D('',#29282,#29283,#29284); +#29282 = CARTESIAN_POINT('',(-1.5,1.13,0.6)); +#29283 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29284 = DIRECTION('',(0.,0.,-1.)); +#29285 = ADVANCED_FACE('',(#29286),#29292,.F.); +#29286 = FACE_BOUND('',#29287,.F.); +#29287 = EDGE_LOOP('',(#29288,#29289,#29290,#29291)); +#29288 = ORIENTED_EDGE('',*,*,#28996,.T.); +#29289 = ORIENTED_EDGE('',*,*,#29012,.T.); +#29290 = ORIENTED_EDGE('',*,*,#29035,.F.); +#29291 = ORIENTED_EDGE('',*,*,#28142,.F.); +#29292 = PLANE('',#29293); +#29293 = AXIS2_PLACEMENT_3D('',#29294,#29295,#29296); +#29294 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#29295 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#29296 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#29297 = ADVANCED_FACE('',(#29298),#29319,.F.); +#29298 = FACE_BOUND('',#29299,.F.); +#29299 = EDGE_LOOP('',(#29300,#29301,#29302,#29303,#29304,#29305,#29306, + #29307,#29308,#29309,#29310,#29311,#29312,#29313)); +#29300 = ORIENTED_EDGE('',*,*,#28891,.T.); +#29301 = ORIENTED_EDGE('',*,*,#28828,.F.); +#29302 = ORIENTED_EDGE('',*,*,#28820,.F.); +#29303 = ORIENTED_EDGE('',*,*,#28845,.T.); +#29304 = ORIENTED_EDGE('',*,*,#28505,.T.); +#29305 = ORIENTED_EDGE('',*,*,#28184,.T.); +#29306 = ORIENTED_EDGE('',*,*,#28176,.F.); +#29307 = ORIENTED_EDGE('',*,*,#28168,.F.); +#29308 = ORIENTED_EDGE('',*,*,#28427,.F.); +#29309 = ORIENTED_EDGE('',*,*,#29052,.F.); +#29310 = ORIENTED_EDGE('',*,*,#29068,.T.); +#29311 = ORIENTED_EDGE('',*,*,#29076,.T.); +#29312 = ORIENTED_EDGE('',*,*,#28949,.F.); +#29313 = ORIENTED_EDGE('',*,*,#29314,.T.); +#29314 = EDGE_CURVE('',#28941,#28883,#29315,.T.); +#29315 = LINE('',#29316,#29317); +#29316 = CARTESIAN_POINT('',(-1.225,-1.25,1.08)); +#29317 = VECTOR('',#29318,1.); +#29318 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#29319 = PLANE('',#29320); +#29320 = AXIS2_PLACEMENT_3D('',#29321,#29322,#29323); +#29321 = CARTESIAN_POINT('',(0.816633064516,-1.25,0.656633064516)); +#29322 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#29323 = DIRECTION('',(0.,0.,-1.)); +#29324 = ADVANCED_FACE('',(#29325),#29331,.F.); +#29325 = FACE_BOUND('',#29326,.F.); +#29326 = EDGE_LOOP('',(#29327,#29328,#29329,#29330)); +#29327 = ORIENTED_EDGE('',*,*,#28531,.T.); +#29328 = ORIENTED_EDGE('',*,*,#28547,.T.); +#29329 = ORIENTED_EDGE('',*,*,#28570,.F.); +#29330 = ORIENTED_EDGE('',*,*,#28208,.F.); +#29331 = PLANE('',#29332); +#29332 = AXIS2_PLACEMENT_3D('',#29333,#29334,#29335); +#29333 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#29334 = DIRECTION('',(-1.,0.,0.)); +#29335 = DIRECTION('',(0.,1.,0.)); +#29336 = ADVANCED_FACE('',(#29337),#29348,.T.); +#29337 = FACE_BOUND('',#29338,.T.); +#29338 = EDGE_LOOP('',(#29339,#29340,#29341,#29342)); +#29339 = ORIENTED_EDGE('',*,*,#28384,.F.); +#29340 = ORIENTED_EDGE('',*,*,#28282,.T.); +#29341 = ORIENTED_EDGE('',*,*,#28304,.T.); +#29342 = ORIENTED_EDGE('',*,*,#29343,.F.); +#29343 = EDGE_CURVE('',#28385,#28305,#29344,.T.); +#29344 = LINE('',#29345,#29346); +#29345 = CARTESIAN_POINT('',(-0.925,1.13,0.6)); +#29346 = VECTOR('',#29347,1.); +#29347 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29348 = PLANE('',#29349); +#29349 = AXIS2_PLACEMENT_3D('',#29350,#29351,#29352); +#29350 = CARTESIAN_POINT('',(-0.925,1.05,0.6)); +#29351 = DIRECTION('',(0.,0.,1.)); +#29352 = DIRECTION('',(1.,0.,-0.)); +#29353 = ADVANCED_FACE('',(#29354),#29366,.T.); +#29354 = FACE_BOUND('',#29355,.T.); +#29355 = EDGE_LOOP('',(#29356,#29357,#29358,#29364,#29365)); +#29356 = ORIENTED_EDGE('',*,*,#28258,.T.); +#29357 = ORIENTED_EDGE('',*,*,#29236,.T.); +#29358 = ORIENTED_EDGE('',*,*,#29359,.F.); +#29359 = EDGE_CURVE('',#29187,#29237,#29360,.T.); +#29360 = LINE('',#29361,#29362); +#29361 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#29362 = VECTOR('',#29363,1.); +#29363 = DIRECTION('',(0.,0.,-1.)); +#29364 = ORIENTED_EDGE('',*,*,#29194,.T.); +#29365 = ORIENTED_EDGE('',*,*,#29107,.T.); +#29366 = PLANE('',#29367); +#29367 = AXIS2_PLACEMENT_3D('',#29368,#29369,#29370); +#29368 = CARTESIAN_POINT('',(-1.225,1.120112441071,0.81113046028)); +#29369 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29370 = DIRECTION('',(0.,0.,-1.)); +#29371 = ADVANCED_FACE('',(#29372),#29399,.F.); +#29372 = FACE_BOUND('',#29373,.F.); +#29373 = EDGE_LOOP('',(#29374,#29375,#29376,#29377,#29385,#29393)); +#29374 = ORIENTED_EDGE('',*,*,#29107,.T.); +#29375 = ORIENTED_EDGE('',*,*,#28250,.F.); +#29376 = ORIENTED_EDGE('',*,*,#28714,.F.); +#29377 = ORIENTED_EDGE('',*,*,#29378,.F.); +#29378 = EDGE_CURVE('',#29379,#28682,#29381,.T.); +#29379 = VERTEX_POINT('',#29380); +#29380 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#29381 = LINE('',#29382,#29383); +#29382 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#29383 = VECTOR('',#29384,1.); +#29384 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#29385 = ORIENTED_EDGE('',*,*,#29386,.T.); +#29386 = EDGE_CURVE('',#29379,#29387,#29389,.T.); +#29387 = VERTEX_POINT('',#29388); +#29388 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#29389 = LINE('',#29390,#29391); +#29390 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#29391 = VECTOR('',#29392,1.); +#29392 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29393 = ORIENTED_EDGE('',*,*,#29394,.T.); +#29394 = EDGE_CURVE('',#29387,#29108,#29395,.T.); +#29395 = LINE('',#29396,#29397); +#29396 = CARTESIAN_POINT('',(-1.225,1.25,1.08)); +#29397 = VECTOR('',#29398,1.); +#29398 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#29399 = PLANE('',#29400); +#29400 = AXIS2_PLACEMENT_3D('',#29401,#29402,#29403); +#29401 = CARTESIAN_POINT('',(0.,0.,1.08)); +#29402 = DIRECTION('',(0.,0.,1.)); +#29403 = DIRECTION('',(1.,0.,-0.)); +#29404 = ADVANCED_FACE('',(#29405),#29417,.T.); +#29405 = FACE_BOUND('',#29406,.F.); +#29406 = EDGE_LOOP('',(#29407,#29408,#29409,#29415,#29416)); +#29407 = ORIENTED_EDGE('',*,*,#28242,.T.); +#29408 = ORIENTED_EDGE('',*,*,#28588,.T.); +#29409 = ORIENTED_EDGE('',*,*,#29410,.F.); +#29410 = EDGE_CURVE('',#28674,#28589,#29411,.T.); +#29411 = LINE('',#29412,#29413); +#29412 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#29413 = VECTOR('',#29414,1.); +#29414 = DIRECTION('',(0.,0.,-1.)); +#29415 = ORIENTED_EDGE('',*,*,#28681,.T.); +#29416 = ORIENTED_EDGE('',*,*,#28714,.T.); +#29417 = PLANE('',#29418); +#29418 = AXIS2_PLACEMENT_3D('',#29419,#29420,#29421); +#29419 = CARTESIAN_POINT('',(1.225,1.120112441071,0.81113046028)); +#29420 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29421 = DIRECTION('',(0.,0.,1.)); +#29422 = ADVANCED_FACE('',(#29423),#29459,.T.); +#29423 = FACE_BOUND('',#29424,.T.); +#29424 = EDGE_LOOP('',(#29425,#29431,#29432,#29433,#29434,#29440,#29441, + #29442,#29443,#29449,#29450,#29451,#29452,#29458)); +#29425 = ORIENTED_EDGE('',*,*,#29426,.T.); +#29426 = EDGE_CURVE('',#29387,#29187,#29427,.T.); +#29427 = LINE('',#29428,#29429); +#29428 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#29429 = VECTOR('',#29430,1.); +#29430 = DIRECTION('',(0.,0.,-1.)); +#29431 = ORIENTED_EDGE('',*,*,#29359,.T.); +#29432 = ORIENTED_EDGE('',*,*,#29244,.T.); +#29433 = ORIENTED_EDGE('',*,*,#29275,.T.); +#29434 = ORIENTED_EDGE('',*,*,#29435,.T.); +#29435 = EDGE_CURVE('',#29268,#28396,#29436,.T.); +#29436 = LINE('',#29437,#29438); +#29437 = CARTESIAN_POINT('',(-1.5,1.13,0.1)); +#29438 = VECTOR('',#29439,1.); +#29439 = DIRECTION('',(1.,-1.110223024625E-16,4.827056628805E-17)); +#29440 = ORIENTED_EDGE('',*,*,#28403,.T.); +#29441 = ORIENTED_EDGE('',*,*,#29343,.T.); +#29442 = ORIENTED_EDGE('',*,*,#28330,.F.); +#29443 = ORIENTED_EDGE('',*,*,#29444,.F.); +#29444 = EDGE_CURVE('',#28620,#28323,#29445,.T.); +#29445 = LINE('',#29446,#29447); +#29446 = CARTESIAN_POINT('',(1.5,1.13,0.1)); +#29447 = VECTOR('',#29448,1.); +#29448 = DIRECTION('',(-1.,1.110223024625E-16,4.827056628805E-17)); +#29449 = ORIENTED_EDGE('',*,*,#28627,.F.); +#29450 = ORIENTED_EDGE('',*,*,#28596,.F.); +#29451 = ORIENTED_EDGE('',*,*,#29410,.F.); +#29452 = ORIENTED_EDGE('',*,*,#29453,.F.); +#29453 = EDGE_CURVE('',#29379,#28674,#29454,.T.); +#29454 = LINE('',#29455,#29456); +#29455 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#29456 = VECTOR('',#29457,1.); +#29457 = DIRECTION('',(0.,0.,-1.)); +#29458 = ORIENTED_EDGE('',*,*,#29386,.T.); +#29459 = PLANE('',#29460); +#29460 = AXIS2_PLACEMENT_3D('',#29461,#29462,#29463); +#29461 = CARTESIAN_POINT('',(-0.816633064516,1.13,0.656633064516)); +#29462 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#29463 = DIRECTION('',(0.,0.,-1.)); +#29464 = ADVANCED_FACE('',(#29465),#29476,.T.); +#29465 = FACE_BOUND('',#29466,.F.); +#29466 = EDGE_LOOP('',(#29467,#29468,#29474,#29475)); +#29467 = ORIENTED_EDGE('',*,*,#28619,.T.); +#29468 = ORIENTED_EDGE('',*,*,#29469,.T.); +#29469 = EDGE_CURVE('',#28612,#28315,#29470,.T.); +#29470 = LINE('',#29471,#29472); +#29471 = CARTESIAN_POINT('',(1.5,1.25,0.1)); +#29472 = VECTOR('',#29473,1.); +#29473 = DIRECTION('',(-1.,1.110223024625E-16,4.827056628805E-17)); +#29474 = ORIENTED_EDGE('',*,*,#28322,.F.); +#29475 = ORIENTED_EDGE('',*,*,#29444,.F.); +#29476 = PLANE('',#29477); +#29477 = AXIS2_PLACEMENT_3D('',#29478,#29479,#29480); +#29478 = CARTESIAN_POINT('',(1.5,1.13,0.1)); +#29479 = DIRECTION('',(-4.827056628805E-17,5.359109410469E-33,-1.)); +#29480 = DIRECTION('',(1.,-1.110223024625E-16,-4.827056628805E-17)); +#29481 = ADVANCED_FACE('',(#29482),#29522,.F.); +#29482 = FACE_BOUND('',#29483,.F.); +#29483 = EDGE_LOOP('',(#29484,#29492,#29493,#29494,#29495,#29501,#29502, + #29503,#29504,#29505,#29506,#29507,#29508,#29516)); +#29484 = ORIENTED_EDGE('',*,*,#29485,.T.); +#29485 = EDGE_CURVE('',#29486,#29179,#29488,.T.); +#29486 = VERTEX_POINT('',#29487); +#29487 = CARTESIAN_POINT('',(-1.225,1.25,1.08)); +#29488 = LINE('',#29489,#29490); +#29489 = CARTESIAN_POINT('',(-1.225,1.25,1.08)); +#29490 = VECTOR('',#29491,1.); +#29491 = DIRECTION('',(0.,0.,-1.)); +#29492 = ORIENTED_EDGE('',*,*,#29218,.F.); +#29493 = ORIENTED_EDGE('',*,*,#29210,.F.); +#29494 = ORIENTED_EDGE('',*,*,#29259,.T.); +#29495 = ORIENTED_EDGE('',*,*,#29496,.T.); +#29496 = EDGE_CURVE('',#29260,#28346,#29497,.T.); +#29497 = LINE('',#29498,#29499); +#29498 = CARTESIAN_POINT('',(-1.5,1.25,0.1)); +#29499 = VECTOR('',#29500,1.); +#29500 = DIRECTION('',(1.,-1.110223024625E-16,4.827056628805E-17)); +#29501 = ORIENTED_EDGE('',*,*,#28353,.T.); +#29502 = ORIENTED_EDGE('',*,*,#28361,.T.); +#29503 = ORIENTED_EDGE('',*,*,#28369,.F.); +#29504 = ORIENTED_EDGE('',*,*,#29469,.F.); +#29505 = ORIENTED_EDGE('',*,*,#28611,.F.); +#29506 = ORIENTED_EDGE('',*,*,#28641,.T.); +#29507 = ORIENTED_EDGE('',*,*,#28649,.T.); +#29508 = ORIENTED_EDGE('',*,*,#29509,.F.); +#29509 = EDGE_CURVE('',#29510,#28650,#29512,.T.); +#29510 = VERTEX_POINT('',#29511); +#29511 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#29512 = LINE('',#29513,#29514); +#29513 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#29514 = VECTOR('',#29515,1.); +#29515 = DIRECTION('',(0.,0.,-1.)); +#29516 = ORIENTED_EDGE('',*,*,#29517,.T.); +#29517 = EDGE_CURVE('',#29510,#29486,#29518,.T.); +#29518 = LINE('',#29519,#29520); +#29519 = CARTESIAN_POINT('',(1.225,1.25,1.08)); +#29520 = VECTOR('',#29521,1.); +#29521 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29522 = PLANE('',#29523); +#29523 = AXIS2_PLACEMENT_3D('',#29524,#29525,#29526); +#29524 = CARTESIAN_POINT('',(-0.816633064516,1.25,0.656633064516)); +#29525 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#29526 = DIRECTION('',(0.,0.,-1.)); +#29527 = ADVANCED_FACE('',(#29528),#29534,.T.); +#29528 = FACE_BOUND('',#29529,.T.); +#29529 = EDGE_LOOP('',(#29530,#29531,#29532,#29533)); +#29530 = ORIENTED_EDGE('',*,*,#29267,.T.); +#29531 = ORIENTED_EDGE('',*,*,#29496,.T.); +#29532 = ORIENTED_EDGE('',*,*,#28395,.F.); +#29533 = ORIENTED_EDGE('',*,*,#29435,.F.); +#29534 = PLANE('',#29535); +#29535 = AXIS2_PLACEMENT_3D('',#29536,#29537,#29538); +#29536 = CARTESIAN_POINT('',(-1.5,1.13,0.1)); +#29537 = DIRECTION('',(4.827056628805E-17,-5.359109410469E-33,-1.)); +#29538 = DIRECTION('',(1.,-1.110223024625E-16,4.827056628805E-17)); +#29539 = ADVANCED_FACE('',(#29540),#29571,.T.); +#29540 = FACE_BOUND('',#29541,.F.); +#29541 = EDGE_LOOP('',(#29542,#29543,#29544,#29545,#29546,#29547,#29555, + #29563,#29570)); +#29542 = ORIENTED_EDGE('',*,*,#28673,.T.); +#29543 = ORIENTED_EDGE('',*,*,#29453,.F.); +#29544 = ORIENTED_EDGE('',*,*,#29378,.T.); +#29545 = ORIENTED_EDGE('',*,*,#28714,.T.); +#29546 = ORIENTED_EDGE('',*,*,#28720,.T.); +#29547 = ORIENTED_EDGE('',*,*,#29548,.T.); +#29548 = EDGE_CURVE('',#28705,#29549,#29551,.T.); +#29549 = VERTEX_POINT('',#29550); +#29550 = CARTESIAN_POINT('',(1.225,1.,1.2)); +#29551 = LINE('',#29552,#29553); +#29552 = CARTESIAN_POINT('',(1.225,1.,1.08)); +#29553 = VECTOR('',#29554,1.); +#29554 = DIRECTION('',(0.,0.,1.)); +#29555 = ORIENTED_EDGE('',*,*,#29556,.T.); +#29556 = EDGE_CURVE('',#29549,#29557,#29559,.T.); +#29557 = VERTEX_POINT('',#29558); +#29558 = CARTESIAN_POINT('',(1.225,1.13,1.2)); +#29559 = LINE('',#29560,#29561); +#29560 = CARTESIAN_POINT('',(1.225,1.,1.2)); +#29561 = VECTOR('',#29562,1.); +#29562 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29563 = ORIENTED_EDGE('',*,*,#29564,.T.); +#29564 = EDGE_CURVE('',#29557,#29510,#29565,.T.); +#29565 = CIRCLE('',#29566,0.12); +#29566 = AXIS2_PLACEMENT_3D('',#29567,#29568,#29569); +#29567 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#29568 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29569 = DIRECTION('',(-4.108650548025E-31,-3.700743415417E-15,1.)); +#29570 = ORIENTED_EDGE('',*,*,#29509,.T.); +#29571 = PLANE('',#29572); +#29572 = AXIS2_PLACEMENT_3D('',#29573,#29574,#29575); +#29573 = CARTESIAN_POINT('',(1.225,1.13,1.08)); +#29574 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29575 = DIRECTION('',(0.,0.,1.)); +#29576 = ADVANCED_FACE('',(#29577),#29588,.F.); +#29577 = FACE_BOUND('',#29578,.F.); +#29578 = EDGE_LOOP('',(#29579,#29580,#29581,#29587)); +#29579 = ORIENTED_EDGE('',*,*,#28704,.F.); +#29580 = ORIENTED_EDGE('',*,*,#28750,.T.); +#29581 = ORIENTED_EDGE('',*,*,#29582,.T.); +#29582 = EDGE_CURVE('',#28743,#29549,#29583,.T.); +#29583 = LINE('',#29584,#29585); +#29584 = CARTESIAN_POINT('',(1.5,1.,1.2)); +#29585 = VECTOR('',#29586,1.); +#29586 = DIRECTION('',(-1.,0.,0.)); +#29587 = ORIENTED_EDGE('',*,*,#29548,.F.); +#29588 = PLANE('',#29589); +#29589 = AXIS2_PLACEMENT_3D('',#29590,#29591,#29592); +#29590 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#29591 = DIRECTION('',(0.,-1.,0.)); +#29592 = DIRECTION('',(-1.,0.,0.)); +#29593 = ADVANCED_FACE('',(#29594),#29605,.F.); +#29594 = FACE_BOUND('',#29595,.F.); +#29595 = EDGE_LOOP('',(#29596,#29597,#29598,#29604)); +#29596 = ORIENTED_EDGE('',*,*,#28781,.F.); +#29597 = ORIENTED_EDGE('',*,*,#28866,.T.); +#29598 = ORIENTED_EDGE('',*,*,#29599,.T.); +#29599 = EDGE_CURVE('',#28867,#28735,#29600,.T.); +#29600 = LINE('',#29601,#29602); +#29601 = CARTESIAN_POINT('',(-1.5,-1.,1.2)); +#29602 = VECTOR('',#29603,1.); +#29603 = DIRECTION('',(1.,0.,0.)); +#29604 = ORIENTED_EDGE('',*,*,#28734,.F.); +#29605 = PLANE('',#29606); +#29606 = AXIS2_PLACEMENT_3D('',#29607,#29608,#29609); +#29607 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#29608 = DIRECTION('',(0.,1.,0.)); +#29609 = DIRECTION('',(1.,0.,0.)); +#29610 = ADVANCED_FACE('',(#29611,#29654),#29665,.T.); +#29611 = FACE_BOUND('',#29612,.T.); +#29612 = EDGE_LOOP('',(#29613,#29619,#29620,#29626,#29627,#29628,#29629, + #29630,#29631,#29639,#29647,#29653)); +#29613 = ORIENTED_EDGE('',*,*,#29614,.T.); +#29614 = EDGE_CURVE('',#29138,#28925,#29615,.T.); +#29615 = LINE('',#29616,#29617); +#29616 = CARTESIAN_POINT('',(-1.5,-1.,1.2)); +#29617 = VECTOR('',#29618,1.); +#29618 = DIRECTION('',(1.,0.,0.)); +#29619 = ORIENTED_EDGE('',*,*,#28932,.T.); +#29620 = ORIENTED_EDGE('',*,*,#29621,.T.); +#29621 = EDGE_CURVE('',#28933,#28875,#29622,.T.); +#29622 = LINE('',#29623,#29624); +#29623 = CARTESIAN_POINT('',(-1.225,-1.13,1.2)); +#29624 = VECTOR('',#29625,1.); +#29625 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#29626 = ORIENTED_EDGE('',*,*,#28874,.F.); +#29627 = ORIENTED_EDGE('',*,*,#29599,.T.); +#29628 = ORIENTED_EDGE('',*,*,#28742,.T.); +#29629 = ORIENTED_EDGE('',*,*,#29582,.T.); +#29630 = ORIENTED_EDGE('',*,*,#29556,.T.); +#29631 = ORIENTED_EDGE('',*,*,#29632,.T.); +#29632 = EDGE_CURVE('',#29557,#29633,#29635,.T.); +#29633 = VERTEX_POINT('',#29634); +#29634 = CARTESIAN_POINT('',(-1.225,1.13,1.2)); +#29635 = LINE('',#29636,#29637); +#29636 = CARTESIAN_POINT('',(1.225,1.13,1.2)); +#29637 = VECTOR('',#29638,1.); +#29638 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29639 = ORIENTED_EDGE('',*,*,#29640,.F.); +#29640 = EDGE_CURVE('',#29641,#29633,#29643,.T.); +#29641 = VERTEX_POINT('',#29642); +#29642 = CARTESIAN_POINT('',(-1.225,1.,1.2)); +#29643 = LINE('',#29644,#29645); +#29644 = CARTESIAN_POINT('',(-1.225,1.,1.2)); +#29645 = VECTOR('',#29646,1.); +#29646 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29647 = ORIENTED_EDGE('',*,*,#29648,.T.); +#29648 = EDGE_CURVE('',#29641,#29130,#29649,.T.); +#29649 = LINE('',#29650,#29651); +#29650 = CARTESIAN_POINT('',(1.5,1.,1.2)); +#29651 = VECTOR('',#29652,1.); +#29652 = DIRECTION('',(-1.,0.,0.)); +#29653 = ORIENTED_EDGE('',*,*,#29137,.T.); +#29654 = FACE_BOUND('',#29655,.T.); +#29655 = EDGE_LOOP('',(#29656)); +#29656 = ORIENTED_EDGE('',*,*,#29657,.F.); +#29657 = EDGE_CURVE('',#29658,#29658,#29660,.T.); +#29658 = VERTEX_POINT('',#29659); +#29659 = CARTESIAN_POINT('',(0.8,0.,1.2)); +#29660 = CIRCLE('',#29661,0.8); +#29661 = AXIS2_PLACEMENT_3D('',#29662,#29663,#29664); +#29662 = CARTESIAN_POINT('',(0.,0.,1.2)); +#29663 = DIRECTION('',(0.,0.,1.)); +#29664 = DIRECTION('',(1.,0.,-0.)); +#29665 = PLANE('',#29666); +#29666 = AXIS2_PLACEMENT_3D('',#29667,#29668,#29669); +#29667 = CARTESIAN_POINT('',(0.,0.,1.2)); +#29668 = DIRECTION('',(0.,0.,1.)); +#29669 = DIRECTION('',(1.,0.,-0.)); +#29670 = ADVANCED_FACE('',(#29671),#29677,.T.); +#29671 = FACE_BOUND('',#29672,.T.); +#29672 = EDGE_LOOP('',(#29673,#29674,#29675,#29676)); +#29673 = ORIENTED_EDGE('',*,*,#29621,.F.); +#29674 = ORIENTED_EDGE('',*,*,#28940,.T.); +#29675 = ORIENTED_EDGE('',*,*,#29314,.T.); +#29676 = ORIENTED_EDGE('',*,*,#28882,.F.); +#29677 = CYLINDRICAL_SURFACE('',#29678,0.12); +#29678 = AXIS2_PLACEMENT_3D('',#29679,#29680,#29681); +#29679 = CARTESIAN_POINT('',(0.6125,-1.13,1.08)); +#29680 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#29681 = DIRECTION('',(8.217301096051E-31,3.700743415417E-15,1.)); +#29682 = ADVANCED_FACE('',(#29683),#29689,.F.); +#29683 = FACE_BOUND('',#29684,.F.); +#29684 = EDGE_LOOP('',(#29685,#29686,#29687,#29688)); +#29685 = ORIENTED_EDGE('',*,*,#29162,.F.); +#29686 = ORIENTED_EDGE('',*,*,#29145,.T.); +#29687 = ORIENTED_EDGE('',*,*,#29614,.T.); +#29688 = ORIENTED_EDGE('',*,*,#28924,.F.); +#29689 = PLANE('',#29690); +#29690 = AXIS2_PLACEMENT_3D('',#29691,#29692,#29693); +#29691 = CARTESIAN_POINT('',(-1.5,-1.,1.08)); +#29692 = DIRECTION('',(0.,1.,0.)); +#29693 = DIRECTION('',(1.,0.,0.)); +#29694 = ADVANCED_FACE('',(#29695),#29717,.T.); +#29695 = FACE_BOUND('',#29696,.T.); +#29696 = EDGE_LOOP('',(#29697,#29698,#29699,#29700,#29701,#29702,#29708, + #29709,#29716)); +#29697 = ORIENTED_EDGE('',*,*,#29186,.T.); +#29698 = ORIENTED_EDGE('',*,*,#29426,.F.); +#29699 = ORIENTED_EDGE('',*,*,#29394,.T.); +#29700 = ORIENTED_EDGE('',*,*,#29107,.T.); +#29701 = ORIENTED_EDGE('',*,*,#29101,.T.); +#29702 = ORIENTED_EDGE('',*,*,#29703,.T.); +#29703 = EDGE_CURVE('',#29094,#29641,#29704,.T.); +#29704 = LINE('',#29705,#29706); +#29705 = CARTESIAN_POINT('',(-1.225,1.,1.08)); +#29706 = VECTOR('',#29707,1.); +#29707 = DIRECTION('',(0.,0.,1.)); +#29708 = ORIENTED_EDGE('',*,*,#29640,.T.); +#29709 = ORIENTED_EDGE('',*,*,#29710,.T.); +#29710 = EDGE_CURVE('',#29633,#29486,#29711,.T.); +#29711 = CIRCLE('',#29712,0.12); +#29712 = AXIS2_PLACEMENT_3D('',#29713,#29714,#29715); +#29713 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#29714 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29715 = DIRECTION('',(-4.108650548025E-31,-3.700743415417E-15,1.)); +#29716 = ORIENTED_EDGE('',*,*,#29485,.T.); +#29717 = PLANE('',#29718); +#29718 = AXIS2_PLACEMENT_3D('',#29719,#29720,#29721); +#29719 = CARTESIAN_POINT('',(-1.225,1.13,1.08)); +#29720 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29721 = DIRECTION('',(0.,0.,-1.)); +#29722 = ADVANCED_FACE('',(#29723),#29729,.F.); +#29723 = FACE_BOUND('',#29724,.F.); +#29724 = EDGE_LOOP('',(#29725,#29726,#29727,#29728)); +#29725 = ORIENTED_EDGE('',*,*,#29093,.F.); +#29726 = ORIENTED_EDGE('',*,*,#29703,.T.); +#29727 = ORIENTED_EDGE('',*,*,#29648,.T.); +#29728 = ORIENTED_EDGE('',*,*,#29129,.F.); +#29729 = PLANE('',#29730); +#29730 = AXIS2_PLACEMENT_3D('',#29731,#29732,#29733); +#29731 = CARTESIAN_POINT('',(1.5,1.,1.08)); +#29732 = DIRECTION('',(0.,-1.,0.)); +#29733 = DIRECTION('',(-1.,0.,0.)); +#29734 = ADVANCED_FACE('',(#29735),#29741,.T.); +#29735 = FACE_BOUND('',#29736,.T.); +#29736 = EDGE_LOOP('',(#29737,#29738,#29739,#29740)); +#29737 = ORIENTED_EDGE('',*,*,#29632,.F.); +#29738 = ORIENTED_EDGE('',*,*,#29564,.T.); +#29739 = ORIENTED_EDGE('',*,*,#29517,.T.); +#29740 = ORIENTED_EDGE('',*,*,#29710,.F.); +#29741 = CYLINDRICAL_SURFACE('',#29742,0.12); +#29742 = AXIS2_PLACEMENT_3D('',#29743,#29744,#29745); +#29743 = CARTESIAN_POINT('',(-0.6125,1.13,1.08)); +#29744 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#29745 = DIRECTION('',(-4.108650548025E-31,-3.700743415417E-15,1.)); +#29746 = ADVANCED_FACE('',(#29747),#29766,.F.); +#29747 = FACE_BOUND('',#29748,.F.); +#29748 = EDGE_LOOP('',(#29749,#29757,#29764,#29765)); +#29749 = ORIENTED_EDGE('',*,*,#29750,.F.); +#29750 = EDGE_CURVE('',#29751,#29658,#29753,.T.); +#29751 = VERTEX_POINT('',#29752); +#29752 = CARTESIAN_POINT('',(0.8,0.,1.08)); +#29753 = LINE('',#29754,#29755); +#29754 = CARTESIAN_POINT('',(0.8,0.,1.08)); +#29755 = VECTOR('',#29756,1.); +#29756 = DIRECTION('',(0.,0.,1.)); +#29757 = ORIENTED_EDGE('',*,*,#29758,.T.); +#29758 = EDGE_CURVE('',#29751,#29751,#29759,.T.); +#29759 = CIRCLE('',#29760,0.8); +#29760 = AXIS2_PLACEMENT_3D('',#29761,#29762,#29763); +#29761 = CARTESIAN_POINT('',(0.,0.,1.08)); +#29762 = DIRECTION('',(0.,0.,1.)); +#29763 = DIRECTION('',(1.,0.,-0.)); +#29764 = ORIENTED_EDGE('',*,*,#29750,.T.); +#29765 = ORIENTED_EDGE('',*,*,#29657,.F.); +#29766 = CYLINDRICAL_SURFACE('',#29767,0.8); +#29767 = AXIS2_PLACEMENT_3D('',#29768,#29769,#29770); +#29768 = CARTESIAN_POINT('',(0.,0.,1.08)); +#29769 = DIRECTION('',(0.,0.,1.)); +#29770 = DIRECTION('',(1.,0.,-0.)); +#29771 = ADVANCED_FACE('',(#29772,#29775),#29812,.T.); +#29772 = FACE_BOUND('',#29773,.T.); +#29773 = EDGE_LOOP('',(#29774)); +#29774 = ORIENTED_EDGE('',*,*,#29758,.T.); +#29775 = FACE_BOUND('',#29776,.T.); +#29776 = EDGE_LOOP('',(#29777,#29788,#29797,#29806)); +#29777 = ORIENTED_EDGE('',*,*,#29778,.F.); +#29778 = EDGE_CURVE('',#29779,#29781,#29783,.T.); +#29779 = VERTEX_POINT('',#29780); +#29780 = CARTESIAN_POINT('',(0.514761438768,0.545454545455,1.08)); +#29781 = VERTEX_POINT('',#29782); +#29782 = CARTESIAN_POINT('',(0.377491721764,0.6,1.08)); +#29783 = CIRCLE('',#29784,0.2); +#29784 = AXIS2_PLACEMENT_3D('',#29785,#29786,#29787); +#29785 = CARTESIAN_POINT('',(0.377491721764,0.4,1.08)); +#29786 = DIRECTION('',(-0.,0.,1.)); +#29787 = DIRECTION('',(0.,-1.,0.)); +#29788 = ORIENTED_EDGE('',*,*,#29789,.T.); +#29789 = EDGE_CURVE('',#29779,#29790,#29792,.T.); +#29790 = VERTEX_POINT('',#29791); +#29791 = CARTESIAN_POINT('',(-0.514761438768,0.545454545455,1.08)); +#29792 = CIRCLE('',#29793,0.75); +#29793 = AXIS2_PLACEMENT_3D('',#29794,#29795,#29796); +#29794 = CARTESIAN_POINT('',(0.,0.,1.08)); +#29795 = DIRECTION('',(0.,0.,-1.)); +#29796 = DIRECTION('',(0.6,0.8,0.)); +#29797 = ORIENTED_EDGE('',*,*,#29798,.T.); +#29798 = EDGE_CURVE('',#29790,#29799,#29801,.T.); +#29799 = VERTEX_POINT('',#29800); +#29800 = CARTESIAN_POINT('',(-0.377491721764,0.6,1.08)); +#29801 = CIRCLE('',#29802,0.2); +#29802 = AXIS2_PLACEMENT_3D('',#29803,#29804,#29805); +#29803 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.08)); +#29804 = DIRECTION('',(-0.,-0.,-1.)); +#29805 = DIRECTION('',(0.,-1.,0.)); +#29806 = ORIENTED_EDGE('',*,*,#29807,.T.); +#29807 = EDGE_CURVE('',#29799,#29781,#29808,.T.); +#29808 = LINE('',#29809,#29810); +#29809 = CARTESIAN_POINT('',(-0.375,0.6,1.08)); +#29810 = VECTOR('',#29811,1.); +#29811 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29812 = PLANE('',#29813); +#29813 = AXIS2_PLACEMENT_3D('',#29814,#29815,#29816); +#29814 = CARTESIAN_POINT('',(0.,0.,1.08)); +#29815 = DIRECTION('',(0.,0.,1.)); +#29816 = DIRECTION('',(1.,0.,-0.)); +#29817 = ADVANCED_FACE('',(#29818),#29844,.T.); +#29818 = FACE_BOUND('',#29819,.T.); +#29819 = EDGE_LOOP('',(#29820,#29821,#29829,#29838)); +#29820 = ORIENTED_EDGE('',*,*,#29778,.T.); +#29821 = ORIENTED_EDGE('',*,*,#29822,.T.); +#29822 = EDGE_CURVE('',#29781,#29823,#29825,.T.); +#29823 = VERTEX_POINT('',#29824); +#29824 = CARTESIAN_POINT('',(0.377491721764,0.6,1.4)); +#29825 = LINE('',#29826,#29827); +#29826 = CARTESIAN_POINT('',(0.377491721764,0.6,1.08)); +#29827 = VECTOR('',#29828,1.); +#29828 = DIRECTION('',(0.,0.,1.)); +#29829 = ORIENTED_EDGE('',*,*,#29830,.T.); +#29830 = EDGE_CURVE('',#29823,#29831,#29833,.T.); +#29831 = VERTEX_POINT('',#29832); +#29832 = CARTESIAN_POINT('',(0.514761438768,0.545454545455,1.4)); +#29833 = CIRCLE('',#29834,0.2); +#29834 = AXIS2_PLACEMENT_3D('',#29835,#29836,#29837); +#29835 = CARTESIAN_POINT('',(0.377491721764,0.4,1.4)); +#29836 = DIRECTION('',(0.,0.,-1.)); +#29837 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#29838 = ORIENTED_EDGE('',*,*,#29839,.F.); +#29839 = EDGE_CURVE('',#29779,#29831,#29840,.T.); +#29840 = LINE('',#29841,#29842); +#29841 = CARTESIAN_POINT('',(0.514761438768,0.545454545455,1.08)); +#29842 = VECTOR('',#29843,1.); +#29843 = DIRECTION('',(0.,0.,1.)); +#29844 = CYLINDRICAL_SURFACE('',#29845,0.2); +#29845 = AXIS2_PLACEMENT_3D('',#29846,#29847,#29848); +#29846 = CARTESIAN_POINT('',(0.377491721764,0.4,1.08)); +#29847 = DIRECTION('',(0.,0.,1.)); +#29848 = DIRECTION('',(0.686348585025,0.727272727273,-0.)); +#29849 = ADVANCED_FACE('',(#29850),#29868,.T.); +#29850 = FACE_BOUND('',#29851,.T.); +#29851 = EDGE_LOOP('',(#29852,#29853,#29861,#29867)); +#29852 = ORIENTED_EDGE('',*,*,#29807,.F.); +#29853 = ORIENTED_EDGE('',*,*,#29854,.T.); +#29854 = EDGE_CURVE('',#29799,#29855,#29857,.T.); +#29855 = VERTEX_POINT('',#29856); +#29856 = CARTESIAN_POINT('',(-0.377491721764,0.6,1.4)); +#29857 = LINE('',#29858,#29859); +#29858 = CARTESIAN_POINT('',(-0.377491721764,0.6,1.08)); +#29859 = VECTOR('',#29860,1.); +#29860 = DIRECTION('',(0.,0.,1.)); +#29861 = ORIENTED_EDGE('',*,*,#29862,.T.); +#29862 = EDGE_CURVE('',#29855,#29823,#29863,.T.); +#29863 = LINE('',#29864,#29865); +#29864 = CARTESIAN_POINT('',(-0.45,0.6,1.4)); +#29865 = VECTOR('',#29866,1.); +#29866 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29867 = ORIENTED_EDGE('',*,*,#29822,.F.); +#29868 = PLANE('',#29869); +#29869 = AXIS2_PLACEMENT_3D('',#29870,#29871,#29872); +#29870 = CARTESIAN_POINT('',(-0.75,0.6,0.)); +#29871 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29872 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29873 = ADVANCED_FACE('',(#29874),#29893,.T.); +#29874 = FACE_BOUND('',#29875,.T.); +#29875 = EDGE_LOOP('',(#29876,#29884,#29891,#29892)); +#29876 = ORIENTED_EDGE('',*,*,#29877,.T.); +#29877 = EDGE_CURVE('',#29790,#29878,#29880,.T.); +#29878 = VERTEX_POINT('',#29879); +#29879 = CARTESIAN_POINT('',(-0.514761438768,0.545454545455,1.4)); +#29880 = LINE('',#29881,#29882); +#29881 = CARTESIAN_POINT('',(-0.514761438768,0.545454545455,1.08)); +#29882 = VECTOR('',#29883,1.); +#29883 = DIRECTION('',(0.,0.,1.)); +#29884 = ORIENTED_EDGE('',*,*,#29885,.F.); +#29885 = EDGE_CURVE('',#29855,#29878,#29886,.T.); +#29886 = CIRCLE('',#29887,0.2); +#29887 = AXIS2_PLACEMENT_3D('',#29888,#29889,#29890); +#29888 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.4)); +#29889 = DIRECTION('',(0.,-0.,1.)); +#29890 = DIRECTION('',(2.775557561563E-16,1.,0.)); +#29891 = ORIENTED_EDGE('',*,*,#29854,.F.); +#29892 = ORIENTED_EDGE('',*,*,#29798,.F.); +#29893 = CYLINDRICAL_SURFACE('',#29894,0.2); +#29894 = AXIS2_PLACEMENT_3D('',#29895,#29896,#29897); +#29895 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.08)); +#29896 = DIRECTION('',(0.,0.,1.)); +#29897 = DIRECTION('',(-0.686348585025,0.727272727273,0.)); +#29898 = ADVANCED_FACE('',(#29899),#29911,.T.); +#29899 = FACE_BOUND('',#29900,.T.); +#29900 = EDGE_LOOP('',(#29901,#29902,#29903,#29910)); +#29901 = ORIENTED_EDGE('',*,*,#29789,.F.); +#29902 = ORIENTED_EDGE('',*,*,#29839,.T.); +#29903 = ORIENTED_EDGE('',*,*,#29904,.T.); +#29904 = EDGE_CURVE('',#29831,#29878,#29905,.T.); +#29905 = CIRCLE('',#29906,0.75); +#29906 = AXIS2_PLACEMENT_3D('',#29907,#29908,#29909); +#29907 = CARTESIAN_POINT('',(0.,0.,1.4)); +#29908 = DIRECTION('',(0.,0.,-1.)); +#29909 = DIRECTION('',(0.6,0.8,0.)); +#29910 = ORIENTED_EDGE('',*,*,#29877,.F.); +#29911 = CYLINDRICAL_SURFACE('',#29912,0.75); +#29912 = AXIS2_PLACEMENT_3D('',#29913,#29914,#29915); +#29913 = CARTESIAN_POINT('',(0.,0.,1.08)); +#29914 = DIRECTION('',(0.,0.,1.)); +#29915 = DIRECTION('',(1.,0.,-0.)); +#29916 = ADVANCED_FACE('',(#29917),#29936,.T.); +#29917 = FACE_BOUND('',#29918,.T.); +#29918 = EDGE_LOOP('',(#29919,#29928,#29935)); +#29919 = ORIENTED_EDGE('',*,*,#29920,.F.); +#29920 = EDGE_CURVE('',#29921,#29823,#29923,.T.); +#29921 = VERTEX_POINT('',#29922); +#29922 = CARTESIAN_POINT('',(0.377491721764,0.4,1.6)); +#29923 = CIRCLE('',#29924,0.2); +#29924 = AXIS2_PLACEMENT_3D('',#29925,#29926,#29927); +#29925 = CARTESIAN_POINT('',(0.377491721764,0.4,1.4)); +#29926 = DIRECTION('',(-1.,5.551115123126E-16,0.)); +#29927 = DIRECTION('',(5.551115123126E-16,1.,0.)); +#29928 = ORIENTED_EDGE('',*,*,#29929,.T.); +#29929 = EDGE_CURVE('',#29921,#29831,#29930,.T.); +#29930 = CIRCLE('',#29931,0.2); +#29931 = AXIS2_PLACEMENT_3D('',#29932,#29933,#29934); +#29932 = CARTESIAN_POINT('',(0.377491721764,0.4,1.4)); +#29933 = DIRECTION('',(-0.727272727273,0.686348585025,0.)); +#29934 = DIRECTION('',(0.686348585025,0.727272727273,0.)); +#29935 = ORIENTED_EDGE('',*,*,#29830,.F.); +#29936 = SPHERICAL_SURFACE('',#29937,0.2); +#29937 = AXIS2_PLACEMENT_3D('',#29938,#29939,#29940); +#29938 = CARTESIAN_POINT('',(0.377491721764,0.4,1.4)); +#29939 = DIRECTION('',(-0.,-0.,-1.)); +#29940 = DIRECTION('',(5.551115123126E-16,1.,-0.)); +#29941 = ADVANCED_FACE('',(#29942),#29961,.T.); +#29942 = FACE_BOUND('',#29943,.T.); +#29943 = EDGE_LOOP('',(#29944,#29953,#29959,#29960)); +#29944 = ORIENTED_EDGE('',*,*,#29945,.F.); +#29945 = EDGE_CURVE('',#29946,#29855,#29948,.T.); +#29946 = VERTEX_POINT('',#29947); +#29947 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.6)); +#29948 = CIRCLE('',#29949,0.2); +#29949 = AXIS2_PLACEMENT_3D('',#29950,#29951,#29952); +#29950 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.4)); +#29951 = DIRECTION('',(-1.,2.775557561563E-16,0.)); +#29952 = DIRECTION('',(2.775557561563E-16,1.,0.)); +#29953 = ORIENTED_EDGE('',*,*,#29954,.T.); +#29954 = EDGE_CURVE('',#29946,#29921,#29955,.T.); +#29955 = LINE('',#29956,#29957); +#29956 = CARTESIAN_POINT('',(-0.45,0.4,1.6)); +#29957 = VECTOR('',#29958,1.); +#29958 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29959 = ORIENTED_EDGE('',*,*,#29920,.T.); +#29960 = ORIENTED_EDGE('',*,*,#29862,.F.); +#29961 = CYLINDRICAL_SURFACE('',#29962,0.2); +#29962 = AXIS2_PLACEMENT_3D('',#29963,#29964,#29965); +#29963 = CARTESIAN_POINT('',(-0.45,0.4,1.4)); +#29964 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#29965 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#29966 = ADVANCED_FACE('',(#29967),#29978,.T.); +#29967 = FACE_BOUND('',#29968,.T.); +#29968 = EDGE_LOOP('',(#29969,#29970,#29977)); +#29969 = ORIENTED_EDGE('',*,*,#29885,.T.); +#29970 = ORIENTED_EDGE('',*,*,#29971,.F.); +#29971 = EDGE_CURVE('',#29946,#29878,#29972,.T.); +#29972 = CIRCLE('',#29973,0.2); +#29973 = AXIS2_PLACEMENT_3D('',#29974,#29975,#29976); +#29974 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.4)); +#29975 = DIRECTION('',(-0.727272727273,-0.686348585025,-0.)); +#29976 = DIRECTION('',(-0.686348585025,0.727272727273,0.)); +#29977 = ORIENTED_EDGE('',*,*,#29945,.T.); +#29978 = SPHERICAL_SURFACE('',#29979,0.2); +#29979 = AXIS2_PLACEMENT_3D('',#29980,#29981,#29982); +#29980 = CARTESIAN_POINT('',(-0.377491721764,0.4,1.4)); +#29981 = DIRECTION('',(-0.,-0.,-1.)); +#29982 = DIRECTION('',(2.775557561563E-16,1.,-0.)); +#29983 = ADVANCED_FACE('',(#29984),#29996,.T.); +#29984 = FACE_BOUND('',#29985,.T.); +#29985 = EDGE_LOOP('',(#29986,#29993,#29994,#29995)); +#29986 = ORIENTED_EDGE('',*,*,#29987,.T.); +#29987 = EDGE_CURVE('',#29921,#29946,#29988,.T.); +#29988 = CIRCLE('',#29989,0.55); +#29989 = AXIS2_PLACEMENT_3D('',#29990,#29991,#29992); +#29990 = CARTESIAN_POINT('',(0.,0.,1.6)); +#29991 = DIRECTION('',(0.,0.,-1.)); +#29992 = DIRECTION('',(0.6,0.8,0.)); +#29993 = ORIENTED_EDGE('',*,*,#29971,.T.); +#29994 = ORIENTED_EDGE('',*,*,#29904,.F.); +#29995 = ORIENTED_EDGE('',*,*,#29929,.F.); +#29996 = TOROIDAL_SURFACE('',#29997,0.55,0.2); +#29997 = AXIS2_PLACEMENT_3D('',#29998,#29999,#30000); +#29998 = CARTESIAN_POINT('',(0.,0.,1.4)); +#29999 = DIRECTION('',(0.,0.,1.)); +#30000 = DIRECTION('',(0.6,0.8,-0.)); +#30001 = ADVANCED_FACE('',(#30002),#30006,.T.); +#30002 = FACE_BOUND('',#30003,.T.); +#30003 = EDGE_LOOP('',(#30004,#30005)); +#30004 = ORIENTED_EDGE('',*,*,#29954,.F.); +#30005 = ORIENTED_EDGE('',*,*,#29987,.F.); +#30006 = PLANE('',#30007); +#30007 = AXIS2_PLACEMENT_3D('',#30008,#30009,#30010); +#30008 = CARTESIAN_POINT('',(0.,0.,1.6)); +#30009 = DIRECTION('',(0.,0.,1.)); +#30010 = DIRECTION('',(1.,0.,-0.)); +#30011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#30015)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#30012,#30013,#30014)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#30012 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#30013 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#30014 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#30015 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#30012, + 'distance_accuracy_value','confusion accuracy'); +#30016 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#30017,#30019); +#30017 = ( REPRESENTATION_RELATIONSHIP('','',#27376,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#30018) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#30018 = ITEM_DEFINED_TRANSFORMATION('','',#11,#199); +#30019 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #30020); +#30020 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('47','SW1','',#5,#27371,$); +#30021 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#27373)); +#30022 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#30023,#30025); +#30023 = ( REPRESENTATION_RELATIONSHIP('','',#27376,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#30024) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#30024 = ITEM_DEFINED_TRANSFORMATION('','',#11,#203); +#30025 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #30026); +#30026 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('48','SW2','',#5,#27371,$); +#30027 = SHAPE_DEFINITION_REPRESENTATION(#30028,#30034); +#30028 = PRODUCT_DEFINITION_SHAPE('','',#30029); +#30029 = PRODUCT_DEFINITION('design','',#30030,#30033); +#30030 = PRODUCT_DEFINITION_FORMATION('','',#30031); +#30031 = PRODUCT('ESP32-WROOM-32E','ESP32-WROOM-32E','',(#30032)); +#30032 = PRODUCT_CONTEXT('',#2,'mechanical'); +#30033 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#30034 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#30035),#45360); +#30035 = BREP_WITH_VOIDS('',#30036,(#43260,#43410,#43560,#43710,#43860, + #44010,#44160,#44310,#44460,#44610,#44760,#44910,#45060,#45210)); +#30036 = CLOSED_SHELL('',(#30037,#30077,#30116,#30163,#32310,#33839, + #33871,#33911,#33935,#33964,#33989,#34013,#34038,#34076,#34130, + #34166,#34198,#34222,#34247,#34285,#34339,#34375,#34407,#34431, + #34456,#34494,#34548,#34584,#34616,#34640,#34665,#34703,#34757, + #34793,#34825,#34849,#34874,#34912,#34966,#35002,#35034,#35058, + #35083,#35121,#35175,#35211,#35243,#35267,#35292,#35330,#35384, + #35420,#35452,#35476,#35501,#35539,#35593,#35629,#35661,#35685, + #35710,#35748,#35802,#35838,#35870,#35894,#35919,#35957,#36011, + #36047,#36079,#36103,#36128,#36166,#36220,#36256,#36288,#36312, + #36337,#36375,#36429,#36465,#36497,#36521,#36546,#36584,#36638, + #36674,#36706,#36730,#36755,#36785,#36823,#36848,#36873,#36909, + #36945,#36983,#37021,#37057,#37093,#37131,#37169,#37205,#37241, + #37279,#37317,#37353,#37389,#37427,#37465,#37501,#37537,#37575, + #37587,#37599,#37611,#37623,#37635,#37647,#37659,#37671,#37683, + #37710,#37734,#37751,#37785,#37809,#37833,#37850,#37884,#37908, + #37932,#37949,#37983,#38007,#38031,#38048,#38082,#38106,#38130, + #38147,#38181,#38205,#38229,#38246,#38280,#38304,#38328,#38345, + #38379,#38403,#38427,#38444,#38478,#38502,#38526,#38543,#38577, + #38601,#38625,#38642,#38676,#38700,#38724,#38741,#38775,#38799, + #38823,#38840,#38874,#38898,#38922,#38939,#38973,#38997,#39021, + #39038,#39072,#39106,#39140,#39174,#39208,#39242,#39276,#39310, + #39344,#39378,#39410,#39434,#39459,#39483,#39508,#39532,#39557, + #39574,#39605,#39629,#39653,#39677,#39701,#39725,#39749,#39773, + #39797,#39821,#39845,#39869,#39893,#39917,#39941,#39965,#39989, + #40013,#40037,#40061,#40085,#40109,#40133,#40157,#40181,#40205, + #40229,#40246,#40263,#40296,#40315,#40334,#40347,#40361,#40379, + #40412,#40429,#40442,#40469,#40495,#40513,#40546,#40563,#40576, + #40603,#40629,#40647,#40680,#40697,#40710,#40737,#40763,#40781, + #40814,#40831,#40844,#40871,#40897,#40915,#40948,#40965,#40978, + #41005,#41031,#41049,#41082,#41099,#41112,#41139,#41165,#41183, + #41216,#41233,#41246,#41273,#41299,#41317,#41350,#41367,#41380, + #41407,#41433,#41451,#41484,#41501,#41514,#41541,#41567,#41585, + #41618,#41635,#41648,#41675,#41701,#41719,#41752,#41769,#41782, + #41809,#41835,#41853,#41886,#41903,#41916,#41943,#41969,#41987, + #42020,#42037,#42050,#42077,#42103,#42121,#42139,#42156,#42169, + #42186,#42199,#42217,#42235,#42252,#42265,#42282,#42295,#42313, + #42331,#42348,#42361,#42378,#42391,#42409,#42427,#42444,#42457, + #42474,#42487,#42505,#42523,#42540,#42553,#42570,#42583,#42603, + #42623,#42643,#42663,#42683,#42703,#42723,#42743,#42763,#42783, + #42803,#42823,#42843,#42868,#42893,#42910,#42935,#42952,#42977, + #42994,#43011,#43047,#43059,#43071,#43083,#43095,#43107,#43119, + #43131,#43143,#43155,#43167,#43179,#43191,#43203,#43226,#43251)); +#30037 = ADVANCED_FACE('',(#30038),#30072,.T.); +#30038 = FACE_BOUND('',#30039,.T.); +#30039 = EDGE_LOOP('',(#30040,#30050,#30058,#30066)); +#30040 = ORIENTED_EDGE('',*,*,#30041,.T.); +#30041 = EDGE_CURVE('',#30042,#30044,#30046,.T.); +#30042 = VERTEX_POINT('',#30043); +#30043 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#30044 = VERTEX_POINT('',#30045); +#30045 = CARTESIAN_POINT('',(-9.,12.75,0.8)); +#30046 = LINE('',#30047,#30048); +#30047 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#30048 = VECTOR('',#30049,1.); +#30049 = DIRECTION('',(0.,0.,1.)); +#30050 = ORIENTED_EDGE('',*,*,#30051,.T.); +#30051 = EDGE_CURVE('',#30044,#30052,#30054,.T.); +#30052 = VERTEX_POINT('',#30053); +#30053 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#30054 = LINE('',#30055,#30056); +#30055 = CARTESIAN_POINT('',(-9.,12.75,0.8)); +#30056 = VECTOR('',#30057,1.); +#30057 = DIRECTION('',(1.,0.,0.)); +#30058 = ORIENTED_EDGE('',*,*,#30059,.F.); +#30059 = EDGE_CURVE('',#30060,#30052,#30062,.T.); +#30060 = VERTEX_POINT('',#30061); +#30061 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30062 = LINE('',#30063,#30064); +#30063 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30064 = VECTOR('',#30065,1.); +#30065 = DIRECTION('',(0.,0.,1.)); +#30066 = ORIENTED_EDGE('',*,*,#30067,.F.); +#30067 = EDGE_CURVE('',#30042,#30060,#30068,.T.); +#30068 = LINE('',#30069,#30070); +#30069 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#30070 = VECTOR('',#30071,1.); +#30071 = DIRECTION('',(1.,0.,0.)); +#30072 = PLANE('',#30073); +#30073 = AXIS2_PLACEMENT_3D('',#30074,#30075,#30076); +#30074 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#30075 = DIRECTION('',(0.,1.,0.)); +#30076 = DIRECTION('',(1.,0.,0.)); +#30077 = ADVANCED_FACE('',(#30078),#30111,.T.); +#30078 = FACE_BOUND('',#30079,.T.); +#30079 = EDGE_LOOP('',(#30080,#30088,#30096,#30104,#30110)); +#30080 = ORIENTED_EDGE('',*,*,#30081,.F.); +#30081 = EDGE_CURVE('',#30082,#30042,#30084,.T.); +#30082 = VERTEX_POINT('',#30083); +#30083 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#30084 = LINE('',#30085,#30086); +#30085 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30086 = VECTOR('',#30087,1.); +#30087 = DIRECTION('',(0.,1.,0.)); +#30088 = ORIENTED_EDGE('',*,*,#30089,.F.); +#30089 = EDGE_CURVE('',#30090,#30082,#30092,.T.); +#30090 = VERTEX_POINT('',#30091); +#30091 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#30092 = LINE('',#30093,#30094); +#30093 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#30094 = VECTOR('',#30095,1.); +#30095 = DIRECTION('',(-0.,-0.,-1.)); +#30096 = ORIENTED_EDGE('',*,*,#30097,.F.); +#30097 = EDGE_CURVE('',#30098,#30090,#30100,.T.); +#30098 = VERTEX_POINT('',#30099); +#30099 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#30100 = LINE('',#30101,#30102); +#30101 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#30102 = VECTOR('',#30103,1.); +#30103 = DIRECTION('',(-0.,-0.,-1.)); +#30104 = ORIENTED_EDGE('',*,*,#30105,.T.); +#30105 = EDGE_CURVE('',#30098,#30044,#30106,.T.); +#30106 = LINE('',#30107,#30108); +#30107 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#30108 = VECTOR('',#30109,1.); +#30109 = DIRECTION('',(0.,1.,0.)); +#30110 = ORIENTED_EDGE('',*,*,#30041,.F.); +#30111 = PLANE('',#30112); +#30112 = AXIS2_PLACEMENT_3D('',#30113,#30114,#30115); +#30113 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30114 = DIRECTION('',(-1.,0.,0.)); +#30115 = DIRECTION('',(0.,1.,0.)); +#30116 = ADVANCED_FACE('',(#30117),#30158,.T.); +#30117 = FACE_BOUND('',#30118,.T.); +#30118 = EDGE_LOOP('',(#30119,#30127,#30128,#30136,#30144,#30152)); +#30119 = ORIENTED_EDGE('',*,*,#30120,.F.); +#30120 = EDGE_CURVE('',#30060,#30121,#30123,.T.); +#30121 = VERTEX_POINT('',#30122); +#30122 = CARTESIAN_POINT('',(9.,5.71,0.)); +#30123 = LINE('',#30124,#30125); +#30124 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30125 = VECTOR('',#30126,1.); +#30126 = DIRECTION('',(0.,-1.,0.)); +#30127 = ORIENTED_EDGE('',*,*,#30059,.T.); +#30128 = ORIENTED_EDGE('',*,*,#30129,.T.); +#30129 = EDGE_CURVE('',#30052,#30130,#30132,.T.); +#30130 = VERTEX_POINT('',#30131); +#30131 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#30132 = LINE('',#30133,#30134); +#30133 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#30134 = VECTOR('',#30135,1.); +#30135 = DIRECTION('',(0.,-1.,0.)); +#30136 = ORIENTED_EDGE('',*,*,#30137,.T.); +#30137 = EDGE_CURVE('',#30130,#30138,#30140,.T.); +#30138 = VERTEX_POINT('',#30139); +#30139 = CARTESIAN_POINT('',(9.000000214576,5.71,0.799997854233)); +#30140 = LINE('',#30141,#30142); +#30141 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#30142 = VECTOR('',#30143,1.); +#30143 = DIRECTION('',(0.,0.,-1.)); +#30144 = ORIENTED_EDGE('',*,*,#30145,.T.); +#30145 = EDGE_CURVE('',#30138,#30146,#30148,.T.); +#30146 = VERTEX_POINT('',#30147); +#30147 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#30148 = LINE('',#30149,#30150); +#30149 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#30150 = VECTOR('',#30151,1.); +#30151 = DIRECTION('',(0.,0.,-1.)); +#30152 = ORIENTED_EDGE('',*,*,#30153,.T.); +#30153 = EDGE_CURVE('',#30146,#30121,#30154,.T.); +#30154 = LINE('',#30155,#30156); +#30155 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#30156 = VECTOR('',#30157,1.); +#30157 = DIRECTION('',(0.,0.,-1.)); +#30158 = PLANE('',#30159); +#30159 = AXIS2_PLACEMENT_3D('',#30160,#30161,#30162); +#30160 = CARTESIAN_POINT('',(9.,12.75,0.)); +#30161 = DIRECTION('',(1.,0.,0.)); +#30162 = DIRECTION('',(0.,-1.,0.)); +#30163 = ADVANCED_FACE('',(#30164,#31999,#32033,#32067,#32101,#32135, + #32169,#32203,#32237,#32271),#32305,.F.); +#30164 = FACE_BOUND('',#30165,.F.); +#30165 = EDGE_LOOP('',(#30166,#30167,#30168,#30176,#30184,#30192,#30200, + #30208,#30216,#30224,#30232,#30240,#30248,#30256,#30264,#30272, + #30280,#30288,#30296,#30304,#30312,#30320,#30328,#30336,#30344, + #30352,#30360,#30368,#30376,#30384,#30392,#30400,#30408,#30416, + #30424,#30432,#30440,#30448,#30456,#30464,#30472,#30480,#30488, + #30496,#30504,#30512,#30520,#30528,#30536,#30544,#30552,#30560, + #30568,#30576,#30584,#30592,#30600,#30608,#30616,#30624,#30632, + #30640,#30648,#30656,#30664,#30672,#30680,#30688,#30696,#30704, + #30712,#30720,#30728,#30736,#30744,#30752,#30760,#30768,#30776, + #30784,#30792,#30800,#30808,#30816,#30824,#30832,#30840,#30848, + #30856,#30864,#30872,#30880,#30888,#30896,#30904,#30912,#30920, + #30928,#30936,#30944,#30952,#30960,#30968,#30976,#30984,#30992, + #31000,#31008,#31016,#31024,#31032,#31040,#31048,#31056,#31064, + #31072,#31080,#31088,#31096,#31104,#31112,#31120,#31128,#31136, + #31144,#31152,#31160,#31168,#31176,#31184,#31192,#31200,#31208, + #31216,#31224,#31232,#31240,#31248,#31256,#31264,#31272,#31280, + #31288,#31296,#31304,#31312,#31320,#31328,#31336,#31344,#31352, + #31360,#31368,#31376,#31384,#31392,#31400,#31408,#31416,#31424, + #31432,#31440,#31448,#31456,#31464,#31472,#31480,#31488,#31496, + #31504,#31512,#31520,#31528,#31536,#31544,#31552,#31560,#31568, + #31576,#31584,#31592,#31600,#31608,#31616,#31624,#31632,#31640, + #31648,#31656,#31664,#31672,#31680,#31688,#31696,#31704,#31712, + #31720,#31728,#31736,#31744,#31752,#31760,#31768,#31776,#31784, + #31792,#31800,#31808,#31816,#31824,#31832,#31840,#31848,#31856, + #31864,#31872,#31880,#31888,#31896,#31904,#31912,#31920,#31928, + #31936,#31944,#31952,#31960,#31968,#31976,#31984,#31992,#31998)); +#30166 = ORIENTED_EDGE('',*,*,#30067,.F.); +#30167 = ORIENTED_EDGE('',*,*,#30081,.F.); +#30168 = ORIENTED_EDGE('',*,*,#30169,.T.); +#30169 = EDGE_CURVE('',#30082,#30170,#30172,.T.); +#30170 = VERTEX_POINT('',#30171); +#30171 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#30172 = LINE('',#30173,#30174); +#30173 = CARTESIAN_POINT('',(-4.5,5.71,0.)); +#30174 = VECTOR('',#30175,1.); +#30175 = DIRECTION('',(1.,0.,0.)); +#30176 = ORIENTED_EDGE('',*,*,#30177,.T.); +#30177 = EDGE_CURVE('',#30170,#30178,#30180,.T.); +#30178 = VERTEX_POINT('',#30179); +#30179 = CARTESIAN_POINT('',(-8.15,5.71,0.)); +#30180 = LINE('',#30181,#30182); +#30181 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#30182 = VECTOR('',#30183,1.); +#30183 = DIRECTION('',(1.,0.,0.)); +#30184 = ORIENTED_EDGE('',*,*,#30185,.T.); +#30185 = EDGE_CURVE('',#30178,#30186,#30188,.T.); +#30186 = VERTEX_POINT('',#30187); +#30187 = CARTESIAN_POINT('',(-8.15,4.81,0.)); +#30188 = LINE('',#30189,#30190); +#30189 = CARTESIAN_POINT('',(-8.15,11.11,0.)); +#30190 = VECTOR('',#30191,1.); +#30191 = DIRECTION('',(0.,-1.,0.)); +#30192 = ORIENTED_EDGE('',*,*,#30193,.F.); +#30193 = EDGE_CURVE('',#30194,#30186,#30196,.T.); +#30194 = VERTEX_POINT('',#30195); +#30195 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#30196 = LINE('',#30197,#30198); +#30197 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#30198 = VECTOR('',#30199,1.); +#30199 = DIRECTION('',(1.,0.,0.)); +#30200 = ORIENTED_EDGE('',*,*,#30201,.T.); +#30201 = EDGE_CURVE('',#30194,#30202,#30204,.T.); +#30202 = VERTEX_POINT('',#30203); +#30203 = CARTESIAN_POINT('',(-9.,4.81,0.)); +#30204 = LINE('',#30205,#30206); +#30205 = CARTESIAN_POINT('',(-4.275,4.81,0.)); +#30206 = VECTOR('',#30207,1.); +#30207 = DIRECTION('',(-1.,0.,0.)); +#30208 = ORIENTED_EDGE('',*,*,#30209,.F.); +#30209 = EDGE_CURVE('',#30210,#30202,#30212,.T.); +#30210 = VERTEX_POINT('',#30211); +#30211 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#30212 = LINE('',#30213,#30214); +#30213 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30214 = VECTOR('',#30215,1.); +#30215 = DIRECTION('',(0.,1.,0.)); +#30216 = ORIENTED_EDGE('',*,*,#30217,.T.); +#30217 = EDGE_CURVE('',#30210,#30218,#30220,.T.); +#30218 = VERTEX_POINT('',#30219); +#30219 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#30220 = LINE('',#30221,#30222); +#30221 = CARTESIAN_POINT('',(-4.5,4.44,0.)); +#30222 = VECTOR('',#30223,1.); +#30223 = DIRECTION('',(1.,0.,0.)); +#30224 = ORIENTED_EDGE('',*,*,#30225,.T.); +#30225 = EDGE_CURVE('',#30218,#30226,#30228,.T.); +#30226 = VERTEX_POINT('',#30227); +#30227 = CARTESIAN_POINT('',(-8.15,4.44,0.)); +#30228 = LINE('',#30229,#30230); +#30229 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#30230 = VECTOR('',#30231,1.); +#30231 = DIRECTION('',(1.,0.,0.)); +#30232 = ORIENTED_EDGE('',*,*,#30233,.T.); +#30233 = EDGE_CURVE('',#30226,#30234,#30236,.T.); +#30234 = VERTEX_POINT('',#30235); +#30235 = CARTESIAN_POINT('',(-8.15,3.54,0.)); +#30236 = LINE('',#30237,#30238); +#30237 = CARTESIAN_POINT('',(-8.15,9.84,0.)); +#30238 = VECTOR('',#30239,1.); +#30239 = DIRECTION('',(0.,-1.,0.)); +#30240 = ORIENTED_EDGE('',*,*,#30241,.F.); +#30241 = EDGE_CURVE('',#30242,#30234,#30244,.T.); +#30242 = VERTEX_POINT('',#30243); +#30243 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#30244 = LINE('',#30245,#30246); +#30245 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#30246 = VECTOR('',#30247,1.); +#30247 = DIRECTION('',(1.,0.,0.)); +#30248 = ORIENTED_EDGE('',*,*,#30249,.T.); +#30249 = EDGE_CURVE('',#30242,#30250,#30252,.T.); +#30250 = VERTEX_POINT('',#30251); +#30251 = CARTESIAN_POINT('',(-9.,3.54,0.)); +#30252 = LINE('',#30253,#30254); +#30253 = CARTESIAN_POINT('',(-4.275,3.54,0.)); +#30254 = VECTOR('',#30255,1.); +#30255 = DIRECTION('',(-1.,0.,0.)); +#30256 = ORIENTED_EDGE('',*,*,#30257,.F.); +#30257 = EDGE_CURVE('',#30258,#30250,#30260,.T.); +#30258 = VERTEX_POINT('',#30259); +#30259 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#30260 = LINE('',#30261,#30262); +#30261 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30262 = VECTOR('',#30263,1.); +#30263 = DIRECTION('',(0.,1.,0.)); +#30264 = ORIENTED_EDGE('',*,*,#30265,.T.); +#30265 = EDGE_CURVE('',#30258,#30266,#30268,.T.); +#30266 = VERTEX_POINT('',#30267); +#30267 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#30268 = LINE('',#30269,#30270); +#30269 = CARTESIAN_POINT('',(-4.5,3.17,0.)); +#30270 = VECTOR('',#30271,1.); +#30271 = DIRECTION('',(1.,0.,0.)); +#30272 = ORIENTED_EDGE('',*,*,#30273,.T.); +#30273 = EDGE_CURVE('',#30266,#30274,#30276,.T.); +#30274 = VERTEX_POINT('',#30275); +#30275 = CARTESIAN_POINT('',(-8.15,3.17,0.)); +#30276 = LINE('',#30277,#30278); +#30277 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#30278 = VECTOR('',#30279,1.); +#30279 = DIRECTION('',(1.,0.,0.)); +#30280 = ORIENTED_EDGE('',*,*,#30281,.T.); +#30281 = EDGE_CURVE('',#30274,#30282,#30284,.T.); +#30282 = VERTEX_POINT('',#30283); +#30283 = CARTESIAN_POINT('',(-8.15,2.27,0.)); +#30284 = LINE('',#30285,#30286); +#30285 = CARTESIAN_POINT('',(-8.15,8.57,0.)); +#30286 = VECTOR('',#30287,1.); +#30287 = DIRECTION('',(0.,-1.,0.)); +#30288 = ORIENTED_EDGE('',*,*,#30289,.F.); +#30289 = EDGE_CURVE('',#30290,#30282,#30292,.T.); +#30290 = VERTEX_POINT('',#30291); +#30291 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#30292 = LINE('',#30293,#30294); +#30293 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#30294 = VECTOR('',#30295,1.); +#30295 = DIRECTION('',(1.,0.,0.)); +#30296 = ORIENTED_EDGE('',*,*,#30297,.T.); +#30297 = EDGE_CURVE('',#30290,#30298,#30300,.T.); +#30298 = VERTEX_POINT('',#30299); +#30299 = CARTESIAN_POINT('',(-9.,2.27,0.)); +#30300 = LINE('',#30301,#30302); +#30301 = CARTESIAN_POINT('',(-4.275,2.27,0.)); +#30302 = VECTOR('',#30303,1.); +#30303 = DIRECTION('',(-1.,0.,0.)); +#30304 = ORIENTED_EDGE('',*,*,#30305,.F.); +#30305 = EDGE_CURVE('',#30306,#30298,#30308,.T.); +#30306 = VERTEX_POINT('',#30307); +#30307 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#30308 = LINE('',#30309,#30310); +#30309 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30310 = VECTOR('',#30311,1.); +#30311 = DIRECTION('',(0.,1.,0.)); +#30312 = ORIENTED_EDGE('',*,*,#30313,.T.); +#30313 = EDGE_CURVE('',#30306,#30314,#30316,.T.); +#30314 = VERTEX_POINT('',#30315); +#30315 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#30316 = LINE('',#30317,#30318); +#30317 = CARTESIAN_POINT('',(-4.5,1.9,0.)); +#30318 = VECTOR('',#30319,1.); +#30319 = DIRECTION('',(1.,0.,0.)); +#30320 = ORIENTED_EDGE('',*,*,#30321,.T.); +#30321 = EDGE_CURVE('',#30314,#30322,#30324,.T.); +#30322 = VERTEX_POINT('',#30323); +#30323 = CARTESIAN_POINT('',(-8.15,1.9,0.)); +#30324 = LINE('',#30325,#30326); +#30325 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#30326 = VECTOR('',#30327,1.); +#30327 = DIRECTION('',(1.,0.,0.)); +#30328 = ORIENTED_EDGE('',*,*,#30329,.T.); +#30329 = EDGE_CURVE('',#30322,#30330,#30332,.T.); +#30330 = VERTEX_POINT('',#30331); +#30331 = CARTESIAN_POINT('',(-8.15,1.,0.)); +#30332 = LINE('',#30333,#30334); +#30333 = CARTESIAN_POINT('',(-8.15,7.3,0.)); +#30334 = VECTOR('',#30335,1.); +#30335 = DIRECTION('',(0.,-1.,0.)); +#30336 = ORIENTED_EDGE('',*,*,#30337,.F.); +#30337 = EDGE_CURVE('',#30338,#30330,#30340,.T.); +#30338 = VERTEX_POINT('',#30339); +#30339 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#30340 = LINE('',#30341,#30342); +#30341 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#30342 = VECTOR('',#30343,1.); +#30343 = DIRECTION('',(1.,0.,0.)); +#30344 = ORIENTED_EDGE('',*,*,#30345,.T.); +#30345 = EDGE_CURVE('',#30338,#30346,#30348,.T.); +#30346 = VERTEX_POINT('',#30347); +#30347 = CARTESIAN_POINT('',(-9.,1.,0.)); +#30348 = LINE('',#30349,#30350); +#30349 = CARTESIAN_POINT('',(-4.275,1.,0.)); +#30350 = VECTOR('',#30351,1.); +#30351 = DIRECTION('',(-1.,0.,0.)); +#30352 = ORIENTED_EDGE('',*,*,#30353,.F.); +#30353 = EDGE_CURVE('',#30354,#30346,#30356,.T.); +#30354 = VERTEX_POINT('',#30355); +#30355 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#30356 = LINE('',#30357,#30358); +#30357 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30358 = VECTOR('',#30359,1.); +#30359 = DIRECTION('',(0.,1.,0.)); +#30360 = ORIENTED_EDGE('',*,*,#30361,.T.); +#30361 = EDGE_CURVE('',#30354,#30362,#30364,.T.); +#30362 = VERTEX_POINT('',#30363); +#30363 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#30364 = LINE('',#30365,#30366); +#30365 = CARTESIAN_POINT('',(-4.5,0.63,0.)); +#30366 = VECTOR('',#30367,1.); +#30367 = DIRECTION('',(1.,0.,0.)); +#30368 = ORIENTED_EDGE('',*,*,#30369,.T.); +#30369 = EDGE_CURVE('',#30362,#30370,#30372,.T.); +#30370 = VERTEX_POINT('',#30371); +#30371 = CARTESIAN_POINT('',(-8.15,0.63,0.)); +#30372 = LINE('',#30373,#30374); +#30373 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#30374 = VECTOR('',#30375,1.); +#30375 = DIRECTION('',(1.,0.,0.)); +#30376 = ORIENTED_EDGE('',*,*,#30377,.T.); +#30377 = EDGE_CURVE('',#30370,#30378,#30380,.T.); +#30378 = VERTEX_POINT('',#30379); +#30379 = CARTESIAN_POINT('',(-8.15,-0.27,0.)); +#30380 = LINE('',#30381,#30382); +#30381 = CARTESIAN_POINT('',(-8.15,6.03,0.)); +#30382 = VECTOR('',#30383,1.); +#30383 = DIRECTION('',(0.,-1.,0.)); +#30384 = ORIENTED_EDGE('',*,*,#30385,.F.); +#30385 = EDGE_CURVE('',#30386,#30378,#30388,.T.); +#30386 = VERTEX_POINT('',#30387); +#30387 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#30388 = LINE('',#30389,#30390); +#30389 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#30390 = VECTOR('',#30391,1.); +#30391 = DIRECTION('',(1.,0.,0.)); +#30392 = ORIENTED_EDGE('',*,*,#30393,.T.); +#30393 = EDGE_CURVE('',#30386,#30394,#30396,.T.); +#30394 = VERTEX_POINT('',#30395); +#30395 = CARTESIAN_POINT('',(-9.,-0.27,0.)); +#30396 = LINE('',#30397,#30398); +#30397 = CARTESIAN_POINT('',(-4.275,-0.27,0.)); +#30398 = VECTOR('',#30399,1.); +#30399 = DIRECTION('',(-1.,0.,0.)); +#30400 = ORIENTED_EDGE('',*,*,#30401,.F.); +#30401 = EDGE_CURVE('',#30402,#30394,#30404,.T.); +#30402 = VERTEX_POINT('',#30403); +#30403 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#30404 = LINE('',#30405,#30406); +#30405 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30406 = VECTOR('',#30407,1.); +#30407 = DIRECTION('',(0.,1.,0.)); +#30408 = ORIENTED_EDGE('',*,*,#30409,.T.); +#30409 = EDGE_CURVE('',#30402,#30410,#30412,.T.); +#30410 = VERTEX_POINT('',#30411); +#30411 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#30412 = LINE('',#30413,#30414); +#30413 = CARTESIAN_POINT('',(-4.5,-0.64,0.)); +#30414 = VECTOR('',#30415,1.); +#30415 = DIRECTION('',(1.,0.,0.)); +#30416 = ORIENTED_EDGE('',*,*,#30417,.T.); +#30417 = EDGE_CURVE('',#30410,#30418,#30420,.T.); +#30418 = VERTEX_POINT('',#30419); +#30419 = CARTESIAN_POINT('',(-8.15,-0.64,0.)); +#30420 = LINE('',#30421,#30422); +#30421 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#30422 = VECTOR('',#30423,1.); +#30423 = DIRECTION('',(1.,0.,0.)); +#30424 = ORIENTED_EDGE('',*,*,#30425,.T.); +#30425 = EDGE_CURVE('',#30418,#30426,#30428,.T.); +#30426 = VERTEX_POINT('',#30427); +#30427 = CARTESIAN_POINT('',(-8.15,-1.54,0.)); +#30428 = LINE('',#30429,#30430); +#30429 = CARTESIAN_POINT('',(-8.15,4.76,0.)); +#30430 = VECTOR('',#30431,1.); +#30431 = DIRECTION('',(0.,-1.,0.)); +#30432 = ORIENTED_EDGE('',*,*,#30433,.F.); +#30433 = EDGE_CURVE('',#30434,#30426,#30436,.T.); +#30434 = VERTEX_POINT('',#30435); +#30435 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#30436 = LINE('',#30437,#30438); +#30437 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#30438 = VECTOR('',#30439,1.); +#30439 = DIRECTION('',(1.,0.,0.)); +#30440 = ORIENTED_EDGE('',*,*,#30441,.T.); +#30441 = EDGE_CURVE('',#30434,#30442,#30444,.T.); +#30442 = VERTEX_POINT('',#30443); +#30443 = CARTESIAN_POINT('',(-9.,-1.54,0.)); +#30444 = LINE('',#30445,#30446); +#30445 = CARTESIAN_POINT('',(-4.275,-1.54,0.)); +#30446 = VECTOR('',#30447,1.); +#30447 = DIRECTION('',(-1.,0.,0.)); +#30448 = ORIENTED_EDGE('',*,*,#30449,.F.); +#30449 = EDGE_CURVE('',#30450,#30442,#30452,.T.); +#30450 = VERTEX_POINT('',#30451); +#30451 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#30452 = LINE('',#30453,#30454); +#30453 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30454 = VECTOR('',#30455,1.); +#30455 = DIRECTION('',(0.,1.,0.)); +#30456 = ORIENTED_EDGE('',*,*,#30457,.T.); +#30457 = EDGE_CURVE('',#30450,#30458,#30460,.T.); +#30458 = VERTEX_POINT('',#30459); +#30459 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#30460 = LINE('',#30461,#30462); +#30461 = CARTESIAN_POINT('',(-4.5,-1.91,0.)); +#30462 = VECTOR('',#30463,1.); +#30463 = DIRECTION('',(1.,0.,0.)); +#30464 = ORIENTED_EDGE('',*,*,#30465,.T.); +#30465 = EDGE_CURVE('',#30458,#30466,#30468,.T.); +#30466 = VERTEX_POINT('',#30467); +#30467 = CARTESIAN_POINT('',(-8.15,-1.91,0.)); +#30468 = LINE('',#30469,#30470); +#30469 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#30470 = VECTOR('',#30471,1.); +#30471 = DIRECTION('',(1.,0.,0.)); +#30472 = ORIENTED_EDGE('',*,*,#30473,.T.); +#30473 = EDGE_CURVE('',#30466,#30474,#30476,.T.); +#30474 = VERTEX_POINT('',#30475); +#30475 = CARTESIAN_POINT('',(-8.15,-2.81,0.)); +#30476 = LINE('',#30477,#30478); +#30477 = CARTESIAN_POINT('',(-8.15,3.49,0.)); +#30478 = VECTOR('',#30479,1.); +#30479 = DIRECTION('',(0.,-1.,0.)); +#30480 = ORIENTED_EDGE('',*,*,#30481,.F.); +#30481 = EDGE_CURVE('',#30482,#30474,#30484,.T.); +#30482 = VERTEX_POINT('',#30483); +#30483 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#30484 = LINE('',#30485,#30486); +#30485 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#30486 = VECTOR('',#30487,1.); +#30487 = DIRECTION('',(1.,0.,0.)); +#30488 = ORIENTED_EDGE('',*,*,#30489,.T.); +#30489 = EDGE_CURVE('',#30482,#30490,#30492,.T.); +#30490 = VERTEX_POINT('',#30491); +#30491 = CARTESIAN_POINT('',(-9.,-2.81,0.)); +#30492 = LINE('',#30493,#30494); +#30493 = CARTESIAN_POINT('',(-4.275,-2.81,0.)); +#30494 = VECTOR('',#30495,1.); +#30495 = DIRECTION('',(-1.,0.,0.)); +#30496 = ORIENTED_EDGE('',*,*,#30497,.F.); +#30497 = EDGE_CURVE('',#30498,#30490,#30500,.T.); +#30498 = VERTEX_POINT('',#30499); +#30499 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#30500 = LINE('',#30501,#30502); +#30501 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30502 = VECTOR('',#30503,1.); +#30503 = DIRECTION('',(0.,1.,0.)); +#30504 = ORIENTED_EDGE('',*,*,#30505,.T.); +#30505 = EDGE_CURVE('',#30498,#30506,#30508,.T.); +#30506 = VERTEX_POINT('',#30507); +#30507 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#30508 = LINE('',#30509,#30510); +#30509 = CARTESIAN_POINT('',(-4.5,-3.18,0.)); +#30510 = VECTOR('',#30511,1.); +#30511 = DIRECTION('',(1.,0.,0.)); +#30512 = ORIENTED_EDGE('',*,*,#30513,.T.); +#30513 = EDGE_CURVE('',#30506,#30514,#30516,.T.); +#30514 = VERTEX_POINT('',#30515); +#30515 = CARTESIAN_POINT('',(-8.15,-3.18,0.)); +#30516 = LINE('',#30517,#30518); +#30517 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#30518 = VECTOR('',#30519,1.); +#30519 = DIRECTION('',(1.,0.,0.)); +#30520 = ORIENTED_EDGE('',*,*,#30521,.T.); +#30521 = EDGE_CURVE('',#30514,#30522,#30524,.T.); +#30522 = VERTEX_POINT('',#30523); +#30523 = CARTESIAN_POINT('',(-8.15,-4.08,0.)); +#30524 = LINE('',#30525,#30526); +#30525 = CARTESIAN_POINT('',(-8.15,2.22,0.)); +#30526 = VECTOR('',#30527,1.); +#30527 = DIRECTION('',(0.,-1.,0.)); +#30528 = ORIENTED_EDGE('',*,*,#30529,.F.); +#30529 = EDGE_CURVE('',#30530,#30522,#30532,.T.); +#30530 = VERTEX_POINT('',#30531); +#30531 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#30532 = LINE('',#30533,#30534); +#30533 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#30534 = VECTOR('',#30535,1.); +#30535 = DIRECTION('',(1.,0.,0.)); +#30536 = ORIENTED_EDGE('',*,*,#30537,.T.); +#30537 = EDGE_CURVE('',#30530,#30538,#30540,.T.); +#30538 = VERTEX_POINT('',#30539); +#30539 = CARTESIAN_POINT('',(-9.,-4.08,0.)); +#30540 = LINE('',#30541,#30542); +#30541 = CARTESIAN_POINT('',(-4.275,-4.08,0.)); +#30542 = VECTOR('',#30543,1.); +#30543 = DIRECTION('',(-1.,0.,0.)); +#30544 = ORIENTED_EDGE('',*,*,#30545,.F.); +#30545 = EDGE_CURVE('',#30546,#30538,#30548,.T.); +#30546 = VERTEX_POINT('',#30547); +#30547 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#30548 = LINE('',#30549,#30550); +#30549 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30550 = VECTOR('',#30551,1.); +#30551 = DIRECTION('',(0.,1.,0.)); +#30552 = ORIENTED_EDGE('',*,*,#30553,.T.); +#30553 = EDGE_CURVE('',#30546,#30554,#30556,.T.); +#30554 = VERTEX_POINT('',#30555); +#30555 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#30556 = LINE('',#30557,#30558); +#30557 = CARTESIAN_POINT('',(-4.5,-4.45,0.)); +#30558 = VECTOR('',#30559,1.); +#30559 = DIRECTION('',(1.,0.,0.)); +#30560 = ORIENTED_EDGE('',*,*,#30561,.T.); +#30561 = EDGE_CURVE('',#30554,#30562,#30564,.T.); +#30562 = VERTEX_POINT('',#30563); +#30563 = CARTESIAN_POINT('',(-8.15,-4.45,0.)); +#30564 = LINE('',#30565,#30566); +#30565 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#30566 = VECTOR('',#30567,1.); +#30567 = DIRECTION('',(1.,0.,0.)); +#30568 = ORIENTED_EDGE('',*,*,#30569,.T.); +#30569 = EDGE_CURVE('',#30562,#30570,#30572,.T.); +#30570 = VERTEX_POINT('',#30571); +#30571 = CARTESIAN_POINT('',(-8.15,-5.35,0.)); +#30572 = LINE('',#30573,#30574); +#30573 = CARTESIAN_POINT('',(-8.15,0.95,0.)); +#30574 = VECTOR('',#30575,1.); +#30575 = DIRECTION('',(0.,-1.,0.)); +#30576 = ORIENTED_EDGE('',*,*,#30577,.F.); +#30577 = EDGE_CURVE('',#30578,#30570,#30580,.T.); +#30578 = VERTEX_POINT('',#30579); +#30579 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#30580 = LINE('',#30581,#30582); +#30581 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#30582 = VECTOR('',#30583,1.); +#30583 = DIRECTION('',(1.,0.,0.)); +#30584 = ORIENTED_EDGE('',*,*,#30585,.T.); +#30585 = EDGE_CURVE('',#30578,#30586,#30588,.T.); +#30586 = VERTEX_POINT('',#30587); +#30587 = CARTESIAN_POINT('',(-9.,-5.35,0.)); +#30588 = LINE('',#30589,#30590); +#30589 = CARTESIAN_POINT('',(-4.275,-5.35,0.)); +#30590 = VECTOR('',#30591,1.); +#30591 = DIRECTION('',(-1.,0.,0.)); +#30592 = ORIENTED_EDGE('',*,*,#30593,.F.); +#30593 = EDGE_CURVE('',#30594,#30586,#30596,.T.); +#30594 = VERTEX_POINT('',#30595); +#30595 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#30596 = LINE('',#30597,#30598); +#30597 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30598 = VECTOR('',#30599,1.); +#30599 = DIRECTION('',(0.,1.,0.)); +#30600 = ORIENTED_EDGE('',*,*,#30601,.T.); +#30601 = EDGE_CURVE('',#30594,#30602,#30604,.T.); +#30602 = VERTEX_POINT('',#30603); +#30603 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#30604 = LINE('',#30605,#30606); +#30605 = CARTESIAN_POINT('',(-4.5,-5.72,0.)); +#30606 = VECTOR('',#30607,1.); +#30607 = DIRECTION('',(1.,0.,0.)); +#30608 = ORIENTED_EDGE('',*,*,#30609,.T.); +#30609 = EDGE_CURVE('',#30602,#30610,#30612,.T.); +#30610 = VERTEX_POINT('',#30611); +#30611 = CARTESIAN_POINT('',(-8.15,-5.72,0.)); +#30612 = LINE('',#30613,#30614); +#30613 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#30614 = VECTOR('',#30615,1.); +#30615 = DIRECTION('',(1.,0.,0.)); +#30616 = ORIENTED_EDGE('',*,*,#30617,.T.); +#30617 = EDGE_CURVE('',#30610,#30618,#30620,.T.); +#30618 = VERTEX_POINT('',#30619); +#30619 = CARTESIAN_POINT('',(-8.15,-6.62,0.)); +#30620 = LINE('',#30621,#30622); +#30621 = CARTESIAN_POINT('',(-8.15,-0.32,0.)); +#30622 = VECTOR('',#30623,1.); +#30623 = DIRECTION('',(0.,-1.,0.)); +#30624 = ORIENTED_EDGE('',*,*,#30625,.F.); +#30625 = EDGE_CURVE('',#30626,#30618,#30628,.T.); +#30626 = VERTEX_POINT('',#30627); +#30627 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#30628 = LINE('',#30629,#30630); +#30629 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#30630 = VECTOR('',#30631,1.); +#30631 = DIRECTION('',(1.,0.,0.)); +#30632 = ORIENTED_EDGE('',*,*,#30633,.T.); +#30633 = EDGE_CURVE('',#30626,#30634,#30636,.T.); +#30634 = VERTEX_POINT('',#30635); +#30635 = CARTESIAN_POINT('',(-9.,-6.62,0.)); +#30636 = LINE('',#30637,#30638); +#30637 = CARTESIAN_POINT('',(-4.275,-6.62,0.)); +#30638 = VECTOR('',#30639,1.); +#30639 = DIRECTION('',(-1.,0.,0.)); +#30640 = ORIENTED_EDGE('',*,*,#30641,.F.); +#30641 = EDGE_CURVE('',#30642,#30634,#30644,.T.); +#30642 = VERTEX_POINT('',#30643); +#30643 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#30644 = LINE('',#30645,#30646); +#30645 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30646 = VECTOR('',#30647,1.); +#30647 = DIRECTION('',(0.,1.,0.)); +#30648 = ORIENTED_EDGE('',*,*,#30649,.T.); +#30649 = EDGE_CURVE('',#30642,#30650,#30652,.T.); +#30650 = VERTEX_POINT('',#30651); +#30651 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#30652 = LINE('',#30653,#30654); +#30653 = CARTESIAN_POINT('',(-4.5,-6.99,0.)); +#30654 = VECTOR('',#30655,1.); +#30655 = DIRECTION('',(1.,0.,0.)); +#30656 = ORIENTED_EDGE('',*,*,#30657,.T.); +#30657 = EDGE_CURVE('',#30650,#30658,#30660,.T.); +#30658 = VERTEX_POINT('',#30659); +#30659 = CARTESIAN_POINT('',(-8.15,-6.99,0.)); +#30660 = LINE('',#30661,#30662); +#30661 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#30662 = VECTOR('',#30663,1.); +#30663 = DIRECTION('',(1.,0.,0.)); +#30664 = ORIENTED_EDGE('',*,*,#30665,.T.); +#30665 = EDGE_CURVE('',#30658,#30666,#30668,.T.); +#30666 = VERTEX_POINT('',#30667); +#30667 = CARTESIAN_POINT('',(-8.15,-7.89,0.)); +#30668 = LINE('',#30669,#30670); +#30669 = CARTESIAN_POINT('',(-8.15,-1.59,0.)); +#30670 = VECTOR('',#30671,1.); +#30671 = DIRECTION('',(0.,-1.,0.)); +#30672 = ORIENTED_EDGE('',*,*,#30673,.F.); +#30673 = EDGE_CURVE('',#30674,#30666,#30676,.T.); +#30674 = VERTEX_POINT('',#30675); +#30675 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#30676 = LINE('',#30677,#30678); +#30677 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#30678 = VECTOR('',#30679,1.); +#30679 = DIRECTION('',(1.,0.,0.)); +#30680 = ORIENTED_EDGE('',*,*,#30681,.T.); +#30681 = EDGE_CURVE('',#30674,#30682,#30684,.T.); +#30682 = VERTEX_POINT('',#30683); +#30683 = CARTESIAN_POINT('',(-9.,-7.89,0.)); +#30684 = LINE('',#30685,#30686); +#30685 = CARTESIAN_POINT('',(-4.275,-7.89,0.)); +#30686 = VECTOR('',#30687,1.); +#30687 = DIRECTION('',(-1.,0.,0.)); +#30688 = ORIENTED_EDGE('',*,*,#30689,.F.); +#30689 = EDGE_CURVE('',#30690,#30682,#30692,.T.); +#30690 = VERTEX_POINT('',#30691); +#30691 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#30692 = LINE('',#30693,#30694); +#30693 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30694 = VECTOR('',#30695,1.); +#30695 = DIRECTION('',(0.,1.,0.)); +#30696 = ORIENTED_EDGE('',*,*,#30697,.T.); +#30697 = EDGE_CURVE('',#30690,#30698,#30700,.T.); +#30698 = VERTEX_POINT('',#30699); +#30699 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#30700 = LINE('',#30701,#30702); +#30701 = CARTESIAN_POINT('',(-4.5,-8.26,0.)); +#30702 = VECTOR('',#30703,1.); +#30703 = DIRECTION('',(1.,0.,0.)); +#30704 = ORIENTED_EDGE('',*,*,#30705,.T.); +#30705 = EDGE_CURVE('',#30698,#30706,#30708,.T.); +#30706 = VERTEX_POINT('',#30707); +#30707 = CARTESIAN_POINT('',(-8.15,-8.26,0.)); +#30708 = LINE('',#30709,#30710); +#30709 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#30710 = VECTOR('',#30711,1.); +#30711 = DIRECTION('',(1.,0.,0.)); +#30712 = ORIENTED_EDGE('',*,*,#30713,.T.); +#30713 = EDGE_CURVE('',#30706,#30714,#30716,.T.); +#30714 = VERTEX_POINT('',#30715); +#30715 = CARTESIAN_POINT('',(-8.15,-9.16,0.)); +#30716 = LINE('',#30717,#30718); +#30717 = CARTESIAN_POINT('',(-8.15,-2.86,0.)); +#30718 = VECTOR('',#30719,1.); +#30719 = DIRECTION('',(0.,-1.,0.)); +#30720 = ORIENTED_EDGE('',*,*,#30721,.F.); +#30721 = EDGE_CURVE('',#30722,#30714,#30724,.T.); +#30722 = VERTEX_POINT('',#30723); +#30723 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#30724 = LINE('',#30725,#30726); +#30725 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#30726 = VECTOR('',#30727,1.); +#30727 = DIRECTION('',(1.,0.,0.)); +#30728 = ORIENTED_EDGE('',*,*,#30729,.T.); +#30729 = EDGE_CURVE('',#30722,#30730,#30732,.T.); +#30730 = VERTEX_POINT('',#30731); +#30731 = CARTESIAN_POINT('',(-9.,-9.16,0.)); +#30732 = LINE('',#30733,#30734); +#30733 = CARTESIAN_POINT('',(-4.275,-9.16,0.)); +#30734 = VECTOR('',#30735,1.); +#30735 = DIRECTION('',(-1.,0.,0.)); +#30736 = ORIENTED_EDGE('',*,*,#30737,.F.); +#30737 = EDGE_CURVE('',#30738,#30730,#30740,.T.); +#30738 = VERTEX_POINT('',#30739); +#30739 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#30740 = LINE('',#30741,#30742); +#30741 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30742 = VECTOR('',#30743,1.); +#30743 = DIRECTION('',(0.,1.,0.)); +#30744 = ORIENTED_EDGE('',*,*,#30745,.T.); +#30745 = EDGE_CURVE('',#30738,#30746,#30748,.T.); +#30746 = VERTEX_POINT('',#30747); +#30747 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#30748 = LINE('',#30749,#30750); +#30749 = CARTESIAN_POINT('',(-4.5,-9.53,0.)); +#30750 = VECTOR('',#30751,1.); +#30751 = DIRECTION('',(1.,0.,0.)); +#30752 = ORIENTED_EDGE('',*,*,#30753,.T.); +#30753 = EDGE_CURVE('',#30746,#30754,#30756,.T.); +#30754 = VERTEX_POINT('',#30755); +#30755 = CARTESIAN_POINT('',(-8.15,-9.53,0.)); +#30756 = LINE('',#30757,#30758); +#30757 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#30758 = VECTOR('',#30759,1.); +#30759 = DIRECTION('',(1.,0.,0.)); +#30760 = ORIENTED_EDGE('',*,*,#30761,.T.); +#30761 = EDGE_CURVE('',#30754,#30762,#30764,.T.); +#30762 = VERTEX_POINT('',#30763); +#30763 = CARTESIAN_POINT('',(-8.15,-10.43,0.)); +#30764 = LINE('',#30765,#30766); +#30765 = CARTESIAN_POINT('',(-8.15,-4.13,0.)); +#30766 = VECTOR('',#30767,1.); +#30767 = DIRECTION('',(0.,-1.,0.)); +#30768 = ORIENTED_EDGE('',*,*,#30769,.F.); +#30769 = EDGE_CURVE('',#30770,#30762,#30772,.T.); +#30770 = VERTEX_POINT('',#30771); +#30771 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#30772 = LINE('',#30773,#30774); +#30773 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#30774 = VECTOR('',#30775,1.); +#30775 = DIRECTION('',(1.,0.,0.)); +#30776 = ORIENTED_EDGE('',*,*,#30777,.T.); +#30777 = EDGE_CURVE('',#30770,#30778,#30780,.T.); +#30778 = VERTEX_POINT('',#30779); +#30779 = CARTESIAN_POINT('',(-9.,-10.43,0.)); +#30780 = LINE('',#30781,#30782); +#30781 = CARTESIAN_POINT('',(-4.275,-10.43,0.)); +#30782 = VECTOR('',#30783,1.); +#30783 = DIRECTION('',(-1.,0.,0.)); +#30784 = ORIENTED_EDGE('',*,*,#30785,.F.); +#30785 = EDGE_CURVE('',#30786,#30778,#30788,.T.); +#30786 = VERTEX_POINT('',#30787); +#30787 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#30788 = LINE('',#30789,#30790); +#30789 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30790 = VECTOR('',#30791,1.); +#30791 = DIRECTION('',(0.,1.,0.)); +#30792 = ORIENTED_EDGE('',*,*,#30793,.T.); +#30793 = EDGE_CURVE('',#30786,#30794,#30796,.T.); +#30794 = VERTEX_POINT('',#30795); +#30795 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#30796 = LINE('',#30797,#30798); +#30797 = CARTESIAN_POINT('',(-4.5,-10.8,0.)); +#30798 = VECTOR('',#30799,1.); +#30799 = DIRECTION('',(1.,0.,0.)); +#30800 = ORIENTED_EDGE('',*,*,#30801,.T.); +#30801 = EDGE_CURVE('',#30794,#30802,#30804,.T.); +#30802 = VERTEX_POINT('',#30803); +#30803 = CARTESIAN_POINT('',(-8.15,-10.8,0.)); +#30804 = LINE('',#30805,#30806); +#30805 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#30806 = VECTOR('',#30807,1.); +#30807 = DIRECTION('',(1.,0.,0.)); +#30808 = ORIENTED_EDGE('',*,*,#30809,.T.); +#30809 = EDGE_CURVE('',#30802,#30810,#30812,.T.); +#30810 = VERTEX_POINT('',#30811); +#30811 = CARTESIAN_POINT('',(-8.15,-11.7,0.)); +#30812 = LINE('',#30813,#30814); +#30813 = CARTESIAN_POINT('',(-8.15,-5.4,0.)); +#30814 = VECTOR('',#30815,1.); +#30815 = DIRECTION('',(0.,-1.,0.)); +#30816 = ORIENTED_EDGE('',*,*,#30817,.F.); +#30817 = EDGE_CURVE('',#30818,#30810,#30820,.T.); +#30818 = VERTEX_POINT('',#30819); +#30819 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#30820 = LINE('',#30821,#30822); +#30821 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#30822 = VECTOR('',#30823,1.); +#30823 = DIRECTION('',(1.,0.,0.)); +#30824 = ORIENTED_EDGE('',*,*,#30825,.T.); +#30825 = EDGE_CURVE('',#30818,#30826,#30828,.T.); +#30826 = VERTEX_POINT('',#30827); +#30827 = CARTESIAN_POINT('',(-9.,-11.7,0.)); +#30828 = LINE('',#30829,#30830); +#30829 = CARTESIAN_POINT('',(-4.275,-11.7,0.)); +#30830 = VECTOR('',#30831,1.); +#30831 = DIRECTION('',(-1.,0.,0.)); +#30832 = ORIENTED_EDGE('',*,*,#30833,.F.); +#30833 = EDGE_CURVE('',#30834,#30826,#30836,.T.); +#30834 = VERTEX_POINT('',#30835); +#30835 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30836 = LINE('',#30837,#30838); +#30837 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#30838 = VECTOR('',#30839,1.); +#30839 = DIRECTION('',(0.,1.,0.)); +#30840 = ORIENTED_EDGE('',*,*,#30841,.F.); +#30841 = EDGE_CURVE('',#30842,#30834,#30844,.T.); +#30842 = VERTEX_POINT('',#30843); +#30843 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#30844 = LINE('',#30845,#30846); +#30845 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#30846 = VECTOR('',#30847,1.); +#30847 = DIRECTION('',(-1.,0.,0.)); +#30848 = ORIENTED_EDGE('',*,*,#30849,.T.); +#30849 = EDGE_CURVE('',#30842,#30850,#30852,.T.); +#30850 = VERTEX_POINT('',#30851); +#30851 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#30852 = LINE('',#30853,#30854); +#30853 = CARTESIAN_POINT('',(-6.165,-6.375,0.)); +#30854 = VECTOR('',#30855,1.); +#30855 = DIRECTION('',(0.,1.,0.)); +#30856 = ORIENTED_EDGE('',*,*,#30857,.T.); +#30857 = EDGE_CURVE('',#30850,#30858,#30860,.T.); +#30858 = VERTEX_POINT('',#30859); +#30859 = CARTESIAN_POINT('',(-6.165,-11.9,0.)); +#30860 = LINE('',#30861,#30862); +#30861 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#30862 = VECTOR('',#30863,1.); +#30863 = DIRECTION('',(0.,1.,0.)); +#30864 = ORIENTED_EDGE('',*,*,#30865,.T.); +#30865 = EDGE_CURVE('',#30858,#30866,#30868,.T.); +#30866 = VERTEX_POINT('',#30867); +#30867 = CARTESIAN_POINT('',(-5.265,-11.9,0.)); +#30868 = LINE('',#30869,#30870); +#30869 = CARTESIAN_POINT('',(-5.6225,-11.9,0.)); +#30870 = VECTOR('',#30871,1.); +#30871 = DIRECTION('',(1.,0.,0.)); +#30872 = ORIENTED_EDGE('',*,*,#30873,.F.); +#30873 = EDGE_CURVE('',#30874,#30866,#30876,.T.); +#30874 = VERTEX_POINT('',#30875); +#30875 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#30876 = LINE('',#30877,#30878); +#30877 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#30878 = VECTOR('',#30879,1.); +#30879 = DIRECTION('',(0.,1.,0.)); +#30880 = ORIENTED_EDGE('',*,*,#30881,.T.); +#30881 = EDGE_CURVE('',#30874,#30882,#30884,.T.); +#30882 = VERTEX_POINT('',#30883); +#30883 = CARTESIAN_POINT('',(-5.265,-12.75,0.)); +#30884 = LINE('',#30885,#30886); +#30885 = CARTESIAN_POINT('',(-5.265,-6.15,0.)); +#30886 = VECTOR('',#30887,1.); +#30887 = DIRECTION('',(0.,-1.,0.)); +#30888 = ORIENTED_EDGE('',*,*,#30889,.F.); +#30889 = EDGE_CURVE('',#30890,#30882,#30892,.T.); +#30890 = VERTEX_POINT('',#30891); +#30891 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#30892 = LINE('',#30893,#30894); +#30893 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#30894 = VECTOR('',#30895,1.); +#30895 = DIRECTION('',(-1.,0.,0.)); +#30896 = ORIENTED_EDGE('',*,*,#30897,.T.); +#30897 = EDGE_CURVE('',#30890,#30898,#30900,.T.); +#30898 = VERTEX_POINT('',#30899); +#30899 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#30900 = LINE('',#30901,#30902); +#30901 = CARTESIAN_POINT('',(-4.895,-6.375,0.)); +#30902 = VECTOR('',#30903,1.); +#30903 = DIRECTION('',(0.,1.,0.)); +#30904 = ORIENTED_EDGE('',*,*,#30905,.T.); +#30905 = EDGE_CURVE('',#30898,#30906,#30908,.T.); +#30906 = VERTEX_POINT('',#30907); +#30907 = CARTESIAN_POINT('',(-4.895,-11.9,0.)); +#30908 = LINE('',#30909,#30910); +#30909 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#30910 = VECTOR('',#30911,1.); +#30911 = DIRECTION('',(0.,1.,0.)); +#30912 = ORIENTED_EDGE('',*,*,#30913,.T.); +#30913 = EDGE_CURVE('',#30906,#30914,#30916,.T.); +#30914 = VERTEX_POINT('',#30915); +#30915 = CARTESIAN_POINT('',(-3.995,-11.9,0.)); +#30916 = LINE('',#30917,#30918); +#30917 = CARTESIAN_POINT('',(-4.3525,-11.9,0.)); +#30918 = VECTOR('',#30919,1.); +#30919 = DIRECTION('',(1.,0.,0.)); +#30920 = ORIENTED_EDGE('',*,*,#30921,.F.); +#30921 = EDGE_CURVE('',#30922,#30914,#30924,.T.); +#30922 = VERTEX_POINT('',#30923); +#30923 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#30924 = LINE('',#30925,#30926); +#30925 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#30926 = VECTOR('',#30927,1.); +#30927 = DIRECTION('',(0.,1.,0.)); +#30928 = ORIENTED_EDGE('',*,*,#30929,.T.); +#30929 = EDGE_CURVE('',#30922,#30930,#30932,.T.); +#30930 = VERTEX_POINT('',#30931); +#30931 = CARTESIAN_POINT('',(-3.995,-12.75,0.)); +#30932 = LINE('',#30933,#30934); +#30933 = CARTESIAN_POINT('',(-3.995,-6.15,0.)); +#30934 = VECTOR('',#30935,1.); +#30935 = DIRECTION('',(0.,-1.,0.)); +#30936 = ORIENTED_EDGE('',*,*,#30937,.F.); +#30937 = EDGE_CURVE('',#30938,#30930,#30940,.T.); +#30938 = VERTEX_POINT('',#30939); +#30939 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#30940 = LINE('',#30941,#30942); +#30941 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#30942 = VECTOR('',#30943,1.); +#30943 = DIRECTION('',(-1.,0.,0.)); +#30944 = ORIENTED_EDGE('',*,*,#30945,.T.); +#30945 = EDGE_CURVE('',#30938,#30946,#30948,.T.); +#30946 = VERTEX_POINT('',#30947); +#30947 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#30948 = LINE('',#30949,#30950); +#30949 = CARTESIAN_POINT('',(-3.625,-6.375,0.)); +#30950 = VECTOR('',#30951,1.); +#30951 = DIRECTION('',(0.,1.,0.)); +#30952 = ORIENTED_EDGE('',*,*,#30953,.T.); +#30953 = EDGE_CURVE('',#30946,#30954,#30956,.T.); +#30954 = VERTEX_POINT('',#30955); +#30955 = CARTESIAN_POINT('',(-3.625,-11.9,0.)); +#30956 = LINE('',#30957,#30958); +#30957 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#30958 = VECTOR('',#30959,1.); +#30959 = DIRECTION('',(0.,1.,0.)); +#30960 = ORIENTED_EDGE('',*,*,#30961,.T.); +#30961 = EDGE_CURVE('',#30954,#30962,#30964,.T.); +#30962 = VERTEX_POINT('',#30963); +#30963 = CARTESIAN_POINT('',(-2.725,-11.9,0.)); +#30964 = LINE('',#30965,#30966); +#30965 = CARTESIAN_POINT('',(-3.0825,-11.9,0.)); +#30966 = VECTOR('',#30967,1.); +#30967 = DIRECTION('',(1.,0.,0.)); +#30968 = ORIENTED_EDGE('',*,*,#30969,.F.); +#30969 = EDGE_CURVE('',#30970,#30962,#30972,.T.); +#30970 = VERTEX_POINT('',#30971); +#30971 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#30972 = LINE('',#30973,#30974); +#30973 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#30974 = VECTOR('',#30975,1.); +#30975 = DIRECTION('',(0.,1.,0.)); +#30976 = ORIENTED_EDGE('',*,*,#30977,.T.); +#30977 = EDGE_CURVE('',#30970,#30978,#30980,.T.); +#30978 = VERTEX_POINT('',#30979); +#30979 = CARTESIAN_POINT('',(-2.725,-12.75,0.)); +#30980 = LINE('',#30981,#30982); +#30981 = CARTESIAN_POINT('',(-2.725,-6.15,0.)); +#30982 = VECTOR('',#30983,1.); +#30983 = DIRECTION('',(0.,-1.,0.)); +#30984 = ORIENTED_EDGE('',*,*,#30985,.F.); +#30985 = EDGE_CURVE('',#30986,#30978,#30988,.T.); +#30986 = VERTEX_POINT('',#30987); +#30987 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#30988 = LINE('',#30989,#30990); +#30989 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#30990 = VECTOR('',#30991,1.); +#30991 = DIRECTION('',(-1.,0.,0.)); +#30992 = ORIENTED_EDGE('',*,*,#30993,.T.); +#30993 = EDGE_CURVE('',#30986,#30994,#30996,.T.); +#30994 = VERTEX_POINT('',#30995); +#30995 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#30996 = LINE('',#30997,#30998); +#30997 = CARTESIAN_POINT('',(-2.355,-6.375,0.)); +#30998 = VECTOR('',#30999,1.); +#30999 = DIRECTION('',(0.,1.,0.)); +#31000 = ORIENTED_EDGE('',*,*,#31001,.T.); +#31001 = EDGE_CURVE('',#30994,#31002,#31004,.T.); +#31002 = VERTEX_POINT('',#31003); +#31003 = CARTESIAN_POINT('',(-2.355,-11.9,0.)); +#31004 = LINE('',#31005,#31006); +#31005 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#31006 = VECTOR('',#31007,1.); +#31007 = DIRECTION('',(0.,1.,0.)); +#31008 = ORIENTED_EDGE('',*,*,#31009,.T.); +#31009 = EDGE_CURVE('',#31002,#31010,#31012,.T.); +#31010 = VERTEX_POINT('',#31011); +#31011 = CARTESIAN_POINT('',(-1.455,-11.9,0.)); +#31012 = LINE('',#31013,#31014); +#31013 = CARTESIAN_POINT('',(-1.8125,-11.9,0.)); +#31014 = VECTOR('',#31015,1.); +#31015 = DIRECTION('',(1.,0.,0.)); +#31016 = ORIENTED_EDGE('',*,*,#31017,.F.); +#31017 = EDGE_CURVE('',#31018,#31010,#31020,.T.); +#31018 = VERTEX_POINT('',#31019); +#31019 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#31020 = LINE('',#31021,#31022); +#31021 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#31022 = VECTOR('',#31023,1.); +#31023 = DIRECTION('',(0.,1.,0.)); +#31024 = ORIENTED_EDGE('',*,*,#31025,.T.); +#31025 = EDGE_CURVE('',#31018,#31026,#31028,.T.); +#31026 = VERTEX_POINT('',#31027); +#31027 = CARTESIAN_POINT('',(-1.455,-12.75,0.)); +#31028 = LINE('',#31029,#31030); +#31029 = CARTESIAN_POINT('',(-1.455,-6.15,0.)); +#31030 = VECTOR('',#31031,1.); +#31031 = DIRECTION('',(0.,-1.,0.)); +#31032 = ORIENTED_EDGE('',*,*,#31033,.F.); +#31033 = EDGE_CURVE('',#31034,#31026,#31036,.T.); +#31034 = VERTEX_POINT('',#31035); +#31035 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#31036 = LINE('',#31037,#31038); +#31037 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#31038 = VECTOR('',#31039,1.); +#31039 = DIRECTION('',(-1.,0.,0.)); +#31040 = ORIENTED_EDGE('',*,*,#31041,.T.); +#31041 = EDGE_CURVE('',#31034,#31042,#31044,.T.); +#31042 = VERTEX_POINT('',#31043); +#31043 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#31044 = LINE('',#31045,#31046); +#31045 = CARTESIAN_POINT('',(-1.085,-6.375,0.)); +#31046 = VECTOR('',#31047,1.); +#31047 = DIRECTION('',(0.,1.,0.)); +#31048 = ORIENTED_EDGE('',*,*,#31049,.T.); +#31049 = EDGE_CURVE('',#31042,#31050,#31052,.T.); +#31050 = VERTEX_POINT('',#31051); +#31051 = CARTESIAN_POINT('',(-1.085,-11.9,0.)); +#31052 = LINE('',#31053,#31054); +#31053 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#31054 = VECTOR('',#31055,1.); +#31055 = DIRECTION('',(0.,1.,0.)); +#31056 = ORIENTED_EDGE('',*,*,#31057,.T.); +#31057 = EDGE_CURVE('',#31050,#31058,#31060,.T.); +#31058 = VERTEX_POINT('',#31059); +#31059 = CARTESIAN_POINT('',(-0.185,-11.9,0.)); +#31060 = LINE('',#31061,#31062); +#31061 = CARTESIAN_POINT('',(-0.5425,-11.9,0.)); +#31062 = VECTOR('',#31063,1.); +#31063 = DIRECTION('',(1.,0.,0.)); +#31064 = ORIENTED_EDGE('',*,*,#31065,.F.); +#31065 = EDGE_CURVE('',#31066,#31058,#31068,.T.); +#31066 = VERTEX_POINT('',#31067); +#31067 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#31068 = LINE('',#31069,#31070); +#31069 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#31070 = VECTOR('',#31071,1.); +#31071 = DIRECTION('',(0.,1.,0.)); +#31072 = ORIENTED_EDGE('',*,*,#31073,.T.); +#31073 = EDGE_CURVE('',#31066,#31074,#31076,.T.); +#31074 = VERTEX_POINT('',#31075); +#31075 = CARTESIAN_POINT('',(-0.185,-12.75,0.)); +#31076 = LINE('',#31077,#31078); +#31077 = CARTESIAN_POINT('',(-0.185,-6.15,0.)); +#31078 = VECTOR('',#31079,1.); +#31079 = DIRECTION('',(0.,-1.,0.)); +#31080 = ORIENTED_EDGE('',*,*,#31081,.F.); +#31081 = EDGE_CURVE('',#31082,#31074,#31084,.T.); +#31082 = VERTEX_POINT('',#31083); +#31083 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#31084 = LINE('',#31085,#31086); +#31085 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#31086 = VECTOR('',#31087,1.); +#31087 = DIRECTION('',(-1.,0.,0.)); +#31088 = ORIENTED_EDGE('',*,*,#31089,.F.); +#31089 = EDGE_CURVE('',#31090,#31082,#31092,.T.); +#31090 = VERTEX_POINT('',#31091); +#31091 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#31092 = LINE('',#31093,#31094); +#31093 = CARTESIAN_POINT('',(0.185,-6.15,0.)); +#31094 = VECTOR('',#31095,1.); +#31095 = DIRECTION('',(0.,-1.,0.)); +#31096 = ORIENTED_EDGE('',*,*,#31097,.T.); +#31097 = EDGE_CURVE('',#31090,#31098,#31100,.T.); +#31098 = VERTEX_POINT('',#31099); +#31099 = CARTESIAN_POINT('',(0.185,-11.9,0.)); +#31100 = LINE('',#31101,#31102); +#31101 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#31102 = VECTOR('',#31103,1.); +#31103 = DIRECTION('',(0.,1.,0.)); +#31104 = ORIENTED_EDGE('',*,*,#31105,.F.); +#31105 = EDGE_CURVE('',#31106,#31098,#31108,.T.); +#31106 = VERTEX_POINT('',#31107); +#31107 = CARTESIAN_POINT('',(1.085,-11.9,0.)); +#31108 = LINE('',#31109,#31110); +#31109 = CARTESIAN_POINT('',(0.5425,-11.9,0.)); +#31110 = VECTOR('',#31111,1.); +#31111 = DIRECTION('',(-1.,-0.,-0.)); +#31112 = ORIENTED_EDGE('',*,*,#31113,.F.); +#31113 = EDGE_CURVE('',#31114,#31106,#31116,.T.); +#31114 = VERTEX_POINT('',#31115); +#31115 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#31116 = LINE('',#31117,#31118); +#31117 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#31118 = VECTOR('',#31119,1.); +#31119 = DIRECTION('',(0.,1.,0.)); +#31120 = ORIENTED_EDGE('',*,*,#31121,.F.); +#31121 = EDGE_CURVE('',#31122,#31114,#31124,.T.); +#31122 = VERTEX_POINT('',#31123); +#31123 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#31124 = LINE('',#31125,#31126); +#31125 = CARTESIAN_POINT('',(1.085,-6.375,0.)); +#31126 = VECTOR('',#31127,1.); +#31127 = DIRECTION('',(0.,1.,0.)); +#31128 = ORIENTED_EDGE('',*,*,#31129,.F.); +#31129 = EDGE_CURVE('',#31130,#31122,#31132,.T.); +#31130 = VERTEX_POINT('',#31131); +#31131 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#31132 = LINE('',#31133,#31134); +#31133 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#31134 = VECTOR('',#31135,1.); +#31135 = DIRECTION('',(-1.,0.,0.)); +#31136 = ORIENTED_EDGE('',*,*,#31137,.F.); +#31137 = EDGE_CURVE('',#31138,#31130,#31140,.T.); +#31138 = VERTEX_POINT('',#31139); +#31139 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#31140 = LINE('',#31141,#31142); +#31141 = CARTESIAN_POINT('',(1.455,-6.15,0.)); +#31142 = VECTOR('',#31143,1.); +#31143 = DIRECTION('',(0.,-1.,0.)); +#31144 = ORIENTED_EDGE('',*,*,#31145,.T.); +#31145 = EDGE_CURVE('',#31138,#31146,#31148,.T.); +#31146 = VERTEX_POINT('',#31147); +#31147 = CARTESIAN_POINT('',(1.455,-11.9,0.)); +#31148 = LINE('',#31149,#31150); +#31149 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#31150 = VECTOR('',#31151,1.); +#31151 = DIRECTION('',(0.,1.,0.)); +#31152 = ORIENTED_EDGE('',*,*,#31153,.F.); +#31153 = EDGE_CURVE('',#31154,#31146,#31156,.T.); +#31154 = VERTEX_POINT('',#31155); +#31155 = CARTESIAN_POINT('',(2.355,-11.9,0.)); +#31156 = LINE('',#31157,#31158); +#31157 = CARTESIAN_POINT('',(1.8125,-11.9,0.)); +#31158 = VECTOR('',#31159,1.); +#31159 = DIRECTION('',(-1.,-0.,-0.)); +#31160 = ORIENTED_EDGE('',*,*,#31161,.F.); +#31161 = EDGE_CURVE('',#31162,#31154,#31164,.T.); +#31162 = VERTEX_POINT('',#31163); +#31163 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#31164 = LINE('',#31165,#31166); +#31165 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#31166 = VECTOR('',#31167,1.); +#31167 = DIRECTION('',(0.,1.,0.)); +#31168 = ORIENTED_EDGE('',*,*,#31169,.F.); +#31169 = EDGE_CURVE('',#31170,#31162,#31172,.T.); +#31170 = VERTEX_POINT('',#31171); +#31171 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#31172 = LINE('',#31173,#31174); +#31173 = CARTESIAN_POINT('',(2.355,-6.375,0.)); +#31174 = VECTOR('',#31175,1.); +#31175 = DIRECTION('',(0.,1.,0.)); +#31176 = ORIENTED_EDGE('',*,*,#31177,.F.); +#31177 = EDGE_CURVE('',#31178,#31170,#31180,.T.); +#31178 = VERTEX_POINT('',#31179); +#31179 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#31180 = LINE('',#31181,#31182); +#31181 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#31182 = VECTOR('',#31183,1.); +#31183 = DIRECTION('',(-1.,0.,0.)); +#31184 = ORIENTED_EDGE('',*,*,#31185,.F.); +#31185 = EDGE_CURVE('',#31186,#31178,#31188,.T.); +#31186 = VERTEX_POINT('',#31187); +#31187 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#31188 = LINE('',#31189,#31190); +#31189 = CARTESIAN_POINT('',(2.725,-6.15,0.)); +#31190 = VECTOR('',#31191,1.); +#31191 = DIRECTION('',(0.,-1.,0.)); +#31192 = ORIENTED_EDGE('',*,*,#31193,.T.); +#31193 = EDGE_CURVE('',#31186,#31194,#31196,.T.); +#31194 = VERTEX_POINT('',#31195); +#31195 = CARTESIAN_POINT('',(2.725,-11.9,0.)); +#31196 = LINE('',#31197,#31198); +#31197 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#31198 = VECTOR('',#31199,1.); +#31199 = DIRECTION('',(0.,1.,0.)); +#31200 = ORIENTED_EDGE('',*,*,#31201,.F.); +#31201 = EDGE_CURVE('',#31202,#31194,#31204,.T.); +#31202 = VERTEX_POINT('',#31203); +#31203 = CARTESIAN_POINT('',(3.625,-11.9,0.)); +#31204 = LINE('',#31205,#31206); +#31205 = CARTESIAN_POINT('',(3.0825,-11.9,0.)); +#31206 = VECTOR('',#31207,1.); +#31207 = DIRECTION('',(-1.,-0.,-0.)); +#31208 = ORIENTED_EDGE('',*,*,#31209,.F.); +#31209 = EDGE_CURVE('',#31210,#31202,#31212,.T.); +#31210 = VERTEX_POINT('',#31211); +#31211 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#31212 = LINE('',#31213,#31214); +#31213 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#31214 = VECTOR('',#31215,1.); +#31215 = DIRECTION('',(0.,1.,0.)); +#31216 = ORIENTED_EDGE('',*,*,#31217,.F.); +#31217 = EDGE_CURVE('',#31218,#31210,#31220,.T.); +#31218 = VERTEX_POINT('',#31219); +#31219 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#31220 = LINE('',#31221,#31222); +#31221 = CARTESIAN_POINT('',(3.625,-6.375,0.)); +#31222 = VECTOR('',#31223,1.); +#31223 = DIRECTION('',(0.,1.,0.)); +#31224 = ORIENTED_EDGE('',*,*,#31225,.F.); +#31225 = EDGE_CURVE('',#31226,#31218,#31228,.T.); +#31226 = VERTEX_POINT('',#31227); +#31227 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#31228 = LINE('',#31229,#31230); +#31229 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#31230 = VECTOR('',#31231,1.); +#31231 = DIRECTION('',(-1.,0.,0.)); +#31232 = ORIENTED_EDGE('',*,*,#31233,.F.); +#31233 = EDGE_CURVE('',#31234,#31226,#31236,.T.); +#31234 = VERTEX_POINT('',#31235); +#31235 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#31236 = LINE('',#31237,#31238); +#31237 = CARTESIAN_POINT('',(3.995,-6.15,0.)); +#31238 = VECTOR('',#31239,1.); +#31239 = DIRECTION('',(0.,-1.,0.)); +#31240 = ORIENTED_EDGE('',*,*,#31241,.T.); +#31241 = EDGE_CURVE('',#31234,#31242,#31244,.T.); +#31242 = VERTEX_POINT('',#31243); +#31243 = CARTESIAN_POINT('',(3.995,-11.9,0.)); +#31244 = LINE('',#31245,#31246); +#31245 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#31246 = VECTOR('',#31247,1.); +#31247 = DIRECTION('',(0.,1.,0.)); +#31248 = ORIENTED_EDGE('',*,*,#31249,.F.); +#31249 = EDGE_CURVE('',#31250,#31242,#31252,.T.); +#31250 = VERTEX_POINT('',#31251); +#31251 = CARTESIAN_POINT('',(4.895,-11.9,0.)); +#31252 = LINE('',#31253,#31254); +#31253 = CARTESIAN_POINT('',(4.3525,-11.9,0.)); +#31254 = VECTOR('',#31255,1.); +#31255 = DIRECTION('',(-1.,-0.,-0.)); +#31256 = ORIENTED_EDGE('',*,*,#31257,.F.); +#31257 = EDGE_CURVE('',#31258,#31250,#31260,.T.); +#31258 = VERTEX_POINT('',#31259); +#31259 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#31260 = LINE('',#31261,#31262); +#31261 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#31262 = VECTOR('',#31263,1.); +#31263 = DIRECTION('',(0.,1.,0.)); +#31264 = ORIENTED_EDGE('',*,*,#31265,.F.); +#31265 = EDGE_CURVE('',#31266,#31258,#31268,.T.); +#31266 = VERTEX_POINT('',#31267); +#31267 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#31268 = LINE('',#31269,#31270); +#31269 = CARTESIAN_POINT('',(4.895,-6.375,0.)); +#31270 = VECTOR('',#31271,1.); +#31271 = DIRECTION('',(0.,1.,0.)); +#31272 = ORIENTED_EDGE('',*,*,#31273,.F.); +#31273 = EDGE_CURVE('',#31274,#31266,#31276,.T.); +#31274 = VERTEX_POINT('',#31275); +#31275 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#31276 = LINE('',#31277,#31278); +#31277 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#31278 = VECTOR('',#31279,1.); +#31279 = DIRECTION('',(-1.,0.,0.)); +#31280 = ORIENTED_EDGE('',*,*,#31281,.F.); +#31281 = EDGE_CURVE('',#31282,#31274,#31284,.T.); +#31282 = VERTEX_POINT('',#31283); +#31283 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#31284 = LINE('',#31285,#31286); +#31285 = CARTESIAN_POINT('',(5.265,-6.15,0.)); +#31286 = VECTOR('',#31287,1.); +#31287 = DIRECTION('',(0.,-1.,0.)); +#31288 = ORIENTED_EDGE('',*,*,#31289,.T.); +#31289 = EDGE_CURVE('',#31282,#31290,#31292,.T.); +#31290 = VERTEX_POINT('',#31291); +#31291 = CARTESIAN_POINT('',(5.265,-11.9,0.)); +#31292 = LINE('',#31293,#31294); +#31293 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#31294 = VECTOR('',#31295,1.); +#31295 = DIRECTION('',(0.,1.,0.)); +#31296 = ORIENTED_EDGE('',*,*,#31297,.F.); +#31297 = EDGE_CURVE('',#31298,#31290,#31300,.T.); +#31298 = VERTEX_POINT('',#31299); +#31299 = CARTESIAN_POINT('',(6.165,-11.9,0.)); +#31300 = LINE('',#31301,#31302); +#31301 = CARTESIAN_POINT('',(5.6225,-11.9,0.)); +#31302 = VECTOR('',#31303,1.); +#31303 = DIRECTION('',(-1.,-0.,-0.)); +#31304 = ORIENTED_EDGE('',*,*,#31305,.F.); +#31305 = EDGE_CURVE('',#31306,#31298,#31308,.T.); +#31306 = VERTEX_POINT('',#31307); +#31307 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#31308 = LINE('',#31309,#31310); +#31309 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#31310 = VECTOR('',#31311,1.); +#31311 = DIRECTION('',(0.,1.,0.)); +#31312 = ORIENTED_EDGE('',*,*,#31313,.F.); +#31313 = EDGE_CURVE('',#31314,#31306,#31316,.T.); +#31314 = VERTEX_POINT('',#31315); +#31315 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#31316 = LINE('',#31317,#31318); +#31317 = CARTESIAN_POINT('',(6.165,-6.375,0.)); +#31318 = VECTOR('',#31319,1.); +#31319 = DIRECTION('',(0.,1.,0.)); +#31320 = ORIENTED_EDGE('',*,*,#31321,.F.); +#31321 = EDGE_CURVE('',#31322,#31314,#31324,.T.); +#31322 = VERTEX_POINT('',#31323); +#31323 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#31324 = LINE('',#31325,#31326); +#31325 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#31326 = VECTOR('',#31327,1.); +#31327 = DIRECTION('',(-1.,0.,0.)); +#31328 = ORIENTED_EDGE('',*,*,#31329,.F.); +#31329 = EDGE_CURVE('',#31330,#31322,#31332,.T.); +#31330 = VERTEX_POINT('',#31331); +#31331 = CARTESIAN_POINT('',(9.,-11.7,0.)); +#31332 = LINE('',#31333,#31334); +#31333 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31334 = VECTOR('',#31335,1.); +#31335 = DIRECTION('',(0.,-1.,0.)); +#31336 = ORIENTED_EDGE('',*,*,#31337,.F.); +#31337 = EDGE_CURVE('',#31338,#31330,#31340,.T.); +#31338 = VERTEX_POINT('',#31339); +#31339 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#31340 = LINE('',#31341,#31342); +#31341 = CARTESIAN_POINT('',(4.275,-11.7,0.)); +#31342 = VECTOR('',#31343,1.); +#31343 = DIRECTION('',(1.,0.,0.)); +#31344 = ORIENTED_EDGE('',*,*,#31345,.T.); +#31345 = EDGE_CURVE('',#31338,#31346,#31348,.T.); +#31346 = VERTEX_POINT('',#31347); +#31347 = CARTESIAN_POINT('',(8.15,-11.7,0.)); +#31348 = LINE('',#31349,#31350); +#31349 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#31350 = VECTOR('',#31351,1.); +#31351 = DIRECTION('',(-1.,-0.,-0.)); +#31352 = ORIENTED_EDGE('',*,*,#31353,.F.); +#31353 = EDGE_CURVE('',#31354,#31346,#31356,.T.); +#31354 = VERTEX_POINT('',#31355); +#31355 = CARTESIAN_POINT('',(8.15,-10.8,0.)); +#31356 = LINE('',#31357,#31358); +#31357 = CARTESIAN_POINT('',(8.15,-5.4,0.)); +#31358 = VECTOR('',#31359,1.); +#31359 = DIRECTION('',(-0.,-1.,-0.)); +#31360 = ORIENTED_EDGE('',*,*,#31361,.F.); +#31361 = EDGE_CURVE('',#31362,#31354,#31364,.T.); +#31362 = VERTEX_POINT('',#31363); +#31363 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#31364 = LINE('',#31365,#31366); +#31365 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#31366 = VECTOR('',#31367,1.); +#31367 = DIRECTION('',(-1.,-0.,-0.)); +#31368 = ORIENTED_EDGE('',*,*,#31369,.F.); +#31369 = EDGE_CURVE('',#31370,#31362,#31372,.T.); +#31370 = VERTEX_POINT('',#31371); +#31371 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#31372 = LINE('',#31373,#31374); +#31373 = CARTESIAN_POINT('',(4.5,-10.8,0.)); +#31374 = VECTOR('',#31375,1.); +#31375 = DIRECTION('',(-1.,0.,0.)); +#31376 = ORIENTED_EDGE('',*,*,#31377,.F.); +#31377 = EDGE_CURVE('',#31378,#31370,#31380,.T.); +#31378 = VERTEX_POINT('',#31379); +#31379 = CARTESIAN_POINT('',(9.,-10.43,0.)); +#31380 = LINE('',#31381,#31382); +#31381 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31382 = VECTOR('',#31383,1.); +#31383 = DIRECTION('',(0.,-1.,0.)); +#31384 = ORIENTED_EDGE('',*,*,#31385,.F.); +#31385 = EDGE_CURVE('',#31386,#31378,#31388,.T.); +#31386 = VERTEX_POINT('',#31387); +#31387 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#31388 = LINE('',#31389,#31390); +#31389 = CARTESIAN_POINT('',(4.275,-10.43,0.)); +#31390 = VECTOR('',#31391,1.); +#31391 = DIRECTION('',(1.,0.,0.)); +#31392 = ORIENTED_EDGE('',*,*,#31393,.T.); +#31393 = EDGE_CURVE('',#31386,#31394,#31396,.T.); +#31394 = VERTEX_POINT('',#31395); +#31395 = CARTESIAN_POINT('',(8.15,-10.43,0.)); +#31396 = LINE('',#31397,#31398); +#31397 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#31398 = VECTOR('',#31399,1.); +#31399 = DIRECTION('',(-1.,-0.,-0.)); +#31400 = ORIENTED_EDGE('',*,*,#31401,.F.); +#31401 = EDGE_CURVE('',#31402,#31394,#31404,.T.); +#31402 = VERTEX_POINT('',#31403); +#31403 = CARTESIAN_POINT('',(8.15,-9.53,0.)); +#31404 = LINE('',#31405,#31406); +#31405 = CARTESIAN_POINT('',(8.15,-4.13,0.)); +#31406 = VECTOR('',#31407,1.); +#31407 = DIRECTION('',(-0.,-1.,-0.)); +#31408 = ORIENTED_EDGE('',*,*,#31409,.F.); +#31409 = EDGE_CURVE('',#31410,#31402,#31412,.T.); +#31410 = VERTEX_POINT('',#31411); +#31411 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#31412 = LINE('',#31413,#31414); +#31413 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#31414 = VECTOR('',#31415,1.); +#31415 = DIRECTION('',(-1.,-0.,-0.)); +#31416 = ORIENTED_EDGE('',*,*,#31417,.F.); +#31417 = EDGE_CURVE('',#31418,#31410,#31420,.T.); +#31418 = VERTEX_POINT('',#31419); +#31419 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#31420 = LINE('',#31421,#31422); +#31421 = CARTESIAN_POINT('',(4.5,-9.53,0.)); +#31422 = VECTOR('',#31423,1.); +#31423 = DIRECTION('',(-1.,0.,0.)); +#31424 = ORIENTED_EDGE('',*,*,#31425,.F.); +#31425 = EDGE_CURVE('',#31426,#31418,#31428,.T.); +#31426 = VERTEX_POINT('',#31427); +#31427 = CARTESIAN_POINT('',(9.,-9.16,0.)); +#31428 = LINE('',#31429,#31430); +#31429 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31430 = VECTOR('',#31431,1.); +#31431 = DIRECTION('',(0.,-1.,0.)); +#31432 = ORIENTED_EDGE('',*,*,#31433,.F.); +#31433 = EDGE_CURVE('',#31434,#31426,#31436,.T.); +#31434 = VERTEX_POINT('',#31435); +#31435 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#31436 = LINE('',#31437,#31438); +#31437 = CARTESIAN_POINT('',(4.275,-9.16,0.)); +#31438 = VECTOR('',#31439,1.); +#31439 = DIRECTION('',(1.,0.,0.)); +#31440 = ORIENTED_EDGE('',*,*,#31441,.T.); +#31441 = EDGE_CURVE('',#31434,#31442,#31444,.T.); +#31442 = VERTEX_POINT('',#31443); +#31443 = CARTESIAN_POINT('',(8.15,-9.16,0.)); +#31444 = LINE('',#31445,#31446); +#31445 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#31446 = VECTOR('',#31447,1.); +#31447 = DIRECTION('',(-1.,-0.,-0.)); +#31448 = ORIENTED_EDGE('',*,*,#31449,.F.); +#31449 = EDGE_CURVE('',#31450,#31442,#31452,.T.); +#31450 = VERTEX_POINT('',#31451); +#31451 = CARTESIAN_POINT('',(8.15,-8.26,0.)); +#31452 = LINE('',#31453,#31454); +#31453 = CARTESIAN_POINT('',(8.15,-2.86,0.)); +#31454 = VECTOR('',#31455,1.); +#31455 = DIRECTION('',(-0.,-1.,-0.)); +#31456 = ORIENTED_EDGE('',*,*,#31457,.F.); +#31457 = EDGE_CURVE('',#31458,#31450,#31460,.T.); +#31458 = VERTEX_POINT('',#31459); +#31459 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#31460 = LINE('',#31461,#31462); +#31461 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#31462 = VECTOR('',#31463,1.); +#31463 = DIRECTION('',(-1.,-0.,-0.)); +#31464 = ORIENTED_EDGE('',*,*,#31465,.F.); +#31465 = EDGE_CURVE('',#31466,#31458,#31468,.T.); +#31466 = VERTEX_POINT('',#31467); +#31467 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#31468 = LINE('',#31469,#31470); +#31469 = CARTESIAN_POINT('',(4.5,-8.26,0.)); +#31470 = VECTOR('',#31471,1.); +#31471 = DIRECTION('',(-1.,0.,0.)); +#31472 = ORIENTED_EDGE('',*,*,#31473,.F.); +#31473 = EDGE_CURVE('',#31474,#31466,#31476,.T.); +#31474 = VERTEX_POINT('',#31475); +#31475 = CARTESIAN_POINT('',(9.,-7.89,0.)); +#31476 = LINE('',#31477,#31478); +#31477 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31478 = VECTOR('',#31479,1.); +#31479 = DIRECTION('',(0.,-1.,0.)); +#31480 = ORIENTED_EDGE('',*,*,#31481,.F.); +#31481 = EDGE_CURVE('',#31482,#31474,#31484,.T.); +#31482 = VERTEX_POINT('',#31483); +#31483 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#31484 = LINE('',#31485,#31486); +#31485 = CARTESIAN_POINT('',(4.275,-7.89,0.)); +#31486 = VECTOR('',#31487,1.); +#31487 = DIRECTION('',(1.,0.,0.)); +#31488 = ORIENTED_EDGE('',*,*,#31489,.T.); +#31489 = EDGE_CURVE('',#31482,#31490,#31492,.T.); +#31490 = VERTEX_POINT('',#31491); +#31491 = CARTESIAN_POINT('',(8.15,-7.89,0.)); +#31492 = LINE('',#31493,#31494); +#31493 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#31494 = VECTOR('',#31495,1.); +#31495 = DIRECTION('',(-1.,-0.,-0.)); +#31496 = ORIENTED_EDGE('',*,*,#31497,.F.); +#31497 = EDGE_CURVE('',#31498,#31490,#31500,.T.); +#31498 = VERTEX_POINT('',#31499); +#31499 = CARTESIAN_POINT('',(8.15,-6.99,0.)); +#31500 = LINE('',#31501,#31502); +#31501 = CARTESIAN_POINT('',(8.15,-1.59,0.)); +#31502 = VECTOR('',#31503,1.); +#31503 = DIRECTION('',(-0.,-1.,-0.)); +#31504 = ORIENTED_EDGE('',*,*,#31505,.F.); +#31505 = EDGE_CURVE('',#31506,#31498,#31508,.T.); +#31506 = VERTEX_POINT('',#31507); +#31507 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#31508 = LINE('',#31509,#31510); +#31509 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#31510 = VECTOR('',#31511,1.); +#31511 = DIRECTION('',(-1.,-0.,-0.)); +#31512 = ORIENTED_EDGE('',*,*,#31513,.F.); +#31513 = EDGE_CURVE('',#31514,#31506,#31516,.T.); +#31514 = VERTEX_POINT('',#31515); +#31515 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#31516 = LINE('',#31517,#31518); +#31517 = CARTESIAN_POINT('',(4.5,-6.99,0.)); +#31518 = VECTOR('',#31519,1.); +#31519 = DIRECTION('',(-1.,0.,0.)); +#31520 = ORIENTED_EDGE('',*,*,#31521,.F.); +#31521 = EDGE_CURVE('',#31522,#31514,#31524,.T.); +#31522 = VERTEX_POINT('',#31523); +#31523 = CARTESIAN_POINT('',(9.,-6.62,0.)); +#31524 = LINE('',#31525,#31526); +#31525 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31526 = VECTOR('',#31527,1.); +#31527 = DIRECTION('',(0.,-1.,0.)); +#31528 = ORIENTED_EDGE('',*,*,#31529,.F.); +#31529 = EDGE_CURVE('',#31530,#31522,#31532,.T.); +#31530 = VERTEX_POINT('',#31531); +#31531 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#31532 = LINE('',#31533,#31534); +#31533 = CARTESIAN_POINT('',(4.275,-6.62,0.)); +#31534 = VECTOR('',#31535,1.); +#31535 = DIRECTION('',(1.,0.,0.)); +#31536 = ORIENTED_EDGE('',*,*,#31537,.T.); +#31537 = EDGE_CURVE('',#31530,#31538,#31540,.T.); +#31538 = VERTEX_POINT('',#31539); +#31539 = CARTESIAN_POINT('',(8.15,-6.62,0.)); +#31540 = LINE('',#31541,#31542); +#31541 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#31542 = VECTOR('',#31543,1.); +#31543 = DIRECTION('',(-1.,-0.,-0.)); +#31544 = ORIENTED_EDGE('',*,*,#31545,.F.); +#31545 = EDGE_CURVE('',#31546,#31538,#31548,.T.); +#31546 = VERTEX_POINT('',#31547); +#31547 = CARTESIAN_POINT('',(8.15,-5.72,0.)); +#31548 = LINE('',#31549,#31550); +#31549 = CARTESIAN_POINT('',(8.15,-0.32,0.)); +#31550 = VECTOR('',#31551,1.); +#31551 = DIRECTION('',(-0.,-1.,-0.)); +#31552 = ORIENTED_EDGE('',*,*,#31553,.F.); +#31553 = EDGE_CURVE('',#31554,#31546,#31556,.T.); +#31554 = VERTEX_POINT('',#31555); +#31555 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#31556 = LINE('',#31557,#31558); +#31557 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#31558 = VECTOR('',#31559,1.); +#31559 = DIRECTION('',(-1.,-0.,-0.)); +#31560 = ORIENTED_EDGE('',*,*,#31561,.F.); +#31561 = EDGE_CURVE('',#31562,#31554,#31564,.T.); +#31562 = VERTEX_POINT('',#31563); +#31563 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#31564 = LINE('',#31565,#31566); +#31565 = CARTESIAN_POINT('',(4.5,-5.72,0.)); +#31566 = VECTOR('',#31567,1.); +#31567 = DIRECTION('',(-1.,0.,0.)); +#31568 = ORIENTED_EDGE('',*,*,#31569,.F.); +#31569 = EDGE_CURVE('',#31570,#31562,#31572,.T.); +#31570 = VERTEX_POINT('',#31571); +#31571 = CARTESIAN_POINT('',(9.,-5.35,0.)); +#31572 = LINE('',#31573,#31574); +#31573 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31574 = VECTOR('',#31575,1.); +#31575 = DIRECTION('',(0.,-1.,0.)); +#31576 = ORIENTED_EDGE('',*,*,#31577,.F.); +#31577 = EDGE_CURVE('',#31578,#31570,#31580,.T.); +#31578 = VERTEX_POINT('',#31579); +#31579 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#31580 = LINE('',#31581,#31582); +#31581 = CARTESIAN_POINT('',(4.275,-5.35,0.)); +#31582 = VECTOR('',#31583,1.); +#31583 = DIRECTION('',(1.,0.,0.)); +#31584 = ORIENTED_EDGE('',*,*,#31585,.T.); +#31585 = EDGE_CURVE('',#31578,#31586,#31588,.T.); +#31586 = VERTEX_POINT('',#31587); +#31587 = CARTESIAN_POINT('',(8.15,-5.35,0.)); +#31588 = LINE('',#31589,#31590); +#31589 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#31590 = VECTOR('',#31591,1.); +#31591 = DIRECTION('',(-1.,-0.,-0.)); +#31592 = ORIENTED_EDGE('',*,*,#31593,.F.); +#31593 = EDGE_CURVE('',#31594,#31586,#31596,.T.); +#31594 = VERTEX_POINT('',#31595); +#31595 = CARTESIAN_POINT('',(8.15,-4.45,0.)); +#31596 = LINE('',#31597,#31598); +#31597 = CARTESIAN_POINT('',(8.15,0.95,0.)); +#31598 = VECTOR('',#31599,1.); +#31599 = DIRECTION('',(-0.,-1.,-0.)); +#31600 = ORIENTED_EDGE('',*,*,#31601,.F.); +#31601 = EDGE_CURVE('',#31602,#31594,#31604,.T.); +#31602 = VERTEX_POINT('',#31603); +#31603 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#31604 = LINE('',#31605,#31606); +#31605 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#31606 = VECTOR('',#31607,1.); +#31607 = DIRECTION('',(-1.,-0.,-0.)); +#31608 = ORIENTED_EDGE('',*,*,#31609,.F.); +#31609 = EDGE_CURVE('',#31610,#31602,#31612,.T.); +#31610 = VERTEX_POINT('',#31611); +#31611 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#31612 = LINE('',#31613,#31614); +#31613 = CARTESIAN_POINT('',(4.5,-4.45,0.)); +#31614 = VECTOR('',#31615,1.); +#31615 = DIRECTION('',(-1.,0.,0.)); +#31616 = ORIENTED_EDGE('',*,*,#31617,.F.); +#31617 = EDGE_CURVE('',#31618,#31610,#31620,.T.); +#31618 = VERTEX_POINT('',#31619); +#31619 = CARTESIAN_POINT('',(9.,-4.08,0.)); +#31620 = LINE('',#31621,#31622); +#31621 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31622 = VECTOR('',#31623,1.); +#31623 = DIRECTION('',(0.,-1.,0.)); +#31624 = ORIENTED_EDGE('',*,*,#31625,.F.); +#31625 = EDGE_CURVE('',#31626,#31618,#31628,.T.); +#31626 = VERTEX_POINT('',#31627); +#31627 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#31628 = LINE('',#31629,#31630); +#31629 = CARTESIAN_POINT('',(4.275,-4.08,0.)); +#31630 = VECTOR('',#31631,1.); +#31631 = DIRECTION('',(1.,0.,0.)); +#31632 = ORIENTED_EDGE('',*,*,#31633,.T.); +#31633 = EDGE_CURVE('',#31626,#31634,#31636,.T.); +#31634 = VERTEX_POINT('',#31635); +#31635 = CARTESIAN_POINT('',(8.15,-4.08,0.)); +#31636 = LINE('',#31637,#31638); +#31637 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#31638 = VECTOR('',#31639,1.); +#31639 = DIRECTION('',(-1.,-0.,-0.)); +#31640 = ORIENTED_EDGE('',*,*,#31641,.F.); +#31641 = EDGE_CURVE('',#31642,#31634,#31644,.T.); +#31642 = VERTEX_POINT('',#31643); +#31643 = CARTESIAN_POINT('',(8.15,-3.18,0.)); +#31644 = LINE('',#31645,#31646); +#31645 = CARTESIAN_POINT('',(8.15,2.22,0.)); +#31646 = VECTOR('',#31647,1.); +#31647 = DIRECTION('',(-0.,-1.,-0.)); +#31648 = ORIENTED_EDGE('',*,*,#31649,.F.); +#31649 = EDGE_CURVE('',#31650,#31642,#31652,.T.); +#31650 = VERTEX_POINT('',#31651); +#31651 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#31652 = LINE('',#31653,#31654); +#31653 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#31654 = VECTOR('',#31655,1.); +#31655 = DIRECTION('',(-1.,-0.,-0.)); +#31656 = ORIENTED_EDGE('',*,*,#31657,.F.); +#31657 = EDGE_CURVE('',#31658,#31650,#31660,.T.); +#31658 = VERTEX_POINT('',#31659); +#31659 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#31660 = LINE('',#31661,#31662); +#31661 = CARTESIAN_POINT('',(4.5,-3.18,0.)); +#31662 = VECTOR('',#31663,1.); +#31663 = DIRECTION('',(-1.,0.,0.)); +#31664 = ORIENTED_EDGE('',*,*,#31665,.F.); +#31665 = EDGE_CURVE('',#31666,#31658,#31668,.T.); +#31666 = VERTEX_POINT('',#31667); +#31667 = CARTESIAN_POINT('',(9.,-2.81,0.)); +#31668 = LINE('',#31669,#31670); +#31669 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31670 = VECTOR('',#31671,1.); +#31671 = DIRECTION('',(0.,-1.,0.)); +#31672 = ORIENTED_EDGE('',*,*,#31673,.F.); +#31673 = EDGE_CURVE('',#31674,#31666,#31676,.T.); +#31674 = VERTEX_POINT('',#31675); +#31675 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#31676 = LINE('',#31677,#31678); +#31677 = CARTESIAN_POINT('',(4.275,-2.81,0.)); +#31678 = VECTOR('',#31679,1.); +#31679 = DIRECTION('',(1.,0.,0.)); +#31680 = ORIENTED_EDGE('',*,*,#31681,.T.); +#31681 = EDGE_CURVE('',#31674,#31682,#31684,.T.); +#31682 = VERTEX_POINT('',#31683); +#31683 = CARTESIAN_POINT('',(8.15,-2.81,0.)); +#31684 = LINE('',#31685,#31686); +#31685 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#31686 = VECTOR('',#31687,1.); +#31687 = DIRECTION('',(-1.,-0.,-0.)); +#31688 = ORIENTED_EDGE('',*,*,#31689,.F.); +#31689 = EDGE_CURVE('',#31690,#31682,#31692,.T.); +#31690 = VERTEX_POINT('',#31691); +#31691 = CARTESIAN_POINT('',(8.15,-1.91,0.)); +#31692 = LINE('',#31693,#31694); +#31693 = CARTESIAN_POINT('',(8.15,3.49,0.)); +#31694 = VECTOR('',#31695,1.); +#31695 = DIRECTION('',(-0.,-1.,-0.)); +#31696 = ORIENTED_EDGE('',*,*,#31697,.F.); +#31697 = EDGE_CURVE('',#31698,#31690,#31700,.T.); +#31698 = VERTEX_POINT('',#31699); +#31699 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#31700 = LINE('',#31701,#31702); +#31701 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#31702 = VECTOR('',#31703,1.); +#31703 = DIRECTION('',(-1.,-0.,-0.)); +#31704 = ORIENTED_EDGE('',*,*,#31705,.F.); +#31705 = EDGE_CURVE('',#31706,#31698,#31708,.T.); +#31706 = VERTEX_POINT('',#31707); +#31707 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#31708 = LINE('',#31709,#31710); +#31709 = CARTESIAN_POINT('',(4.5,-1.91,0.)); +#31710 = VECTOR('',#31711,1.); +#31711 = DIRECTION('',(-1.,0.,0.)); +#31712 = ORIENTED_EDGE('',*,*,#31713,.F.); +#31713 = EDGE_CURVE('',#31714,#31706,#31716,.T.); +#31714 = VERTEX_POINT('',#31715); +#31715 = CARTESIAN_POINT('',(9.,-1.54,0.)); +#31716 = LINE('',#31717,#31718); +#31717 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31718 = VECTOR('',#31719,1.); +#31719 = DIRECTION('',(0.,-1.,0.)); +#31720 = ORIENTED_EDGE('',*,*,#31721,.F.); +#31721 = EDGE_CURVE('',#31722,#31714,#31724,.T.); +#31722 = VERTEX_POINT('',#31723); +#31723 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#31724 = LINE('',#31725,#31726); +#31725 = CARTESIAN_POINT('',(4.275,-1.54,0.)); +#31726 = VECTOR('',#31727,1.); +#31727 = DIRECTION('',(1.,0.,0.)); +#31728 = ORIENTED_EDGE('',*,*,#31729,.T.); +#31729 = EDGE_CURVE('',#31722,#31730,#31732,.T.); +#31730 = VERTEX_POINT('',#31731); +#31731 = CARTESIAN_POINT('',(8.15,-1.54,0.)); +#31732 = LINE('',#31733,#31734); +#31733 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#31734 = VECTOR('',#31735,1.); +#31735 = DIRECTION('',(-1.,-0.,-0.)); +#31736 = ORIENTED_EDGE('',*,*,#31737,.F.); +#31737 = EDGE_CURVE('',#31738,#31730,#31740,.T.); +#31738 = VERTEX_POINT('',#31739); +#31739 = CARTESIAN_POINT('',(8.15,-0.64,0.)); +#31740 = LINE('',#31741,#31742); +#31741 = CARTESIAN_POINT('',(8.15,4.76,0.)); +#31742 = VECTOR('',#31743,1.); +#31743 = DIRECTION('',(-0.,-1.,-0.)); +#31744 = ORIENTED_EDGE('',*,*,#31745,.F.); +#31745 = EDGE_CURVE('',#31746,#31738,#31748,.T.); +#31746 = VERTEX_POINT('',#31747); +#31747 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#31748 = LINE('',#31749,#31750); +#31749 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#31750 = VECTOR('',#31751,1.); +#31751 = DIRECTION('',(-1.,-0.,-0.)); +#31752 = ORIENTED_EDGE('',*,*,#31753,.F.); +#31753 = EDGE_CURVE('',#31754,#31746,#31756,.T.); +#31754 = VERTEX_POINT('',#31755); +#31755 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#31756 = LINE('',#31757,#31758); +#31757 = CARTESIAN_POINT('',(4.5,-0.64,0.)); +#31758 = VECTOR('',#31759,1.); +#31759 = DIRECTION('',(-1.,0.,0.)); +#31760 = ORIENTED_EDGE('',*,*,#31761,.F.); +#31761 = EDGE_CURVE('',#31762,#31754,#31764,.T.); +#31762 = VERTEX_POINT('',#31763); +#31763 = CARTESIAN_POINT('',(9.,-0.27,0.)); +#31764 = LINE('',#31765,#31766); +#31765 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31766 = VECTOR('',#31767,1.); +#31767 = DIRECTION('',(0.,-1.,0.)); +#31768 = ORIENTED_EDGE('',*,*,#31769,.F.); +#31769 = EDGE_CURVE('',#31770,#31762,#31772,.T.); +#31770 = VERTEX_POINT('',#31771); +#31771 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#31772 = LINE('',#31773,#31774); +#31773 = CARTESIAN_POINT('',(4.275,-0.27,0.)); +#31774 = VECTOR('',#31775,1.); +#31775 = DIRECTION('',(1.,0.,0.)); +#31776 = ORIENTED_EDGE('',*,*,#31777,.T.); +#31777 = EDGE_CURVE('',#31770,#31778,#31780,.T.); +#31778 = VERTEX_POINT('',#31779); +#31779 = CARTESIAN_POINT('',(8.15,-0.27,0.)); +#31780 = LINE('',#31781,#31782); +#31781 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#31782 = VECTOR('',#31783,1.); +#31783 = DIRECTION('',(-1.,-0.,-0.)); +#31784 = ORIENTED_EDGE('',*,*,#31785,.F.); +#31785 = EDGE_CURVE('',#31786,#31778,#31788,.T.); +#31786 = VERTEX_POINT('',#31787); +#31787 = CARTESIAN_POINT('',(8.15,0.63,0.)); +#31788 = LINE('',#31789,#31790); +#31789 = CARTESIAN_POINT('',(8.15,6.03,0.)); +#31790 = VECTOR('',#31791,1.); +#31791 = DIRECTION('',(-0.,-1.,-0.)); +#31792 = ORIENTED_EDGE('',*,*,#31793,.F.); +#31793 = EDGE_CURVE('',#31794,#31786,#31796,.T.); +#31794 = VERTEX_POINT('',#31795); +#31795 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#31796 = LINE('',#31797,#31798); +#31797 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#31798 = VECTOR('',#31799,1.); +#31799 = DIRECTION('',(-1.,-0.,-0.)); +#31800 = ORIENTED_EDGE('',*,*,#31801,.F.); +#31801 = EDGE_CURVE('',#31802,#31794,#31804,.T.); +#31802 = VERTEX_POINT('',#31803); +#31803 = CARTESIAN_POINT('',(9.,0.63,0.)); +#31804 = LINE('',#31805,#31806); +#31805 = CARTESIAN_POINT('',(4.5,0.63,0.)); +#31806 = VECTOR('',#31807,1.); +#31807 = DIRECTION('',(-1.,0.,0.)); +#31808 = ORIENTED_EDGE('',*,*,#31809,.F.); +#31809 = EDGE_CURVE('',#31810,#31802,#31812,.T.); +#31810 = VERTEX_POINT('',#31811); +#31811 = CARTESIAN_POINT('',(9.,1.,0.)); +#31812 = LINE('',#31813,#31814); +#31813 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31814 = VECTOR('',#31815,1.); +#31815 = DIRECTION('',(0.,-1.,0.)); +#31816 = ORIENTED_EDGE('',*,*,#31817,.F.); +#31817 = EDGE_CURVE('',#31818,#31810,#31820,.T.); +#31818 = VERTEX_POINT('',#31819); +#31819 = CARTESIAN_POINT('',(8.55,1.,0.)); +#31820 = LINE('',#31821,#31822); +#31821 = CARTESIAN_POINT('',(4.275,1.,0.)); +#31822 = VECTOR('',#31823,1.); +#31823 = DIRECTION('',(1.,0.,0.)); +#31824 = ORIENTED_EDGE('',*,*,#31825,.T.); +#31825 = EDGE_CURVE('',#31818,#31826,#31828,.T.); +#31826 = VERTEX_POINT('',#31827); +#31827 = CARTESIAN_POINT('',(8.15,1.,0.)); +#31828 = LINE('',#31829,#31830); +#31829 = CARTESIAN_POINT('',(8.55,1.,0.)); +#31830 = VECTOR('',#31831,1.); +#31831 = DIRECTION('',(-1.,-0.,-0.)); +#31832 = ORIENTED_EDGE('',*,*,#31833,.F.); +#31833 = EDGE_CURVE('',#31834,#31826,#31836,.T.); +#31834 = VERTEX_POINT('',#31835); +#31835 = CARTESIAN_POINT('',(8.15,1.9,0.)); +#31836 = LINE('',#31837,#31838); +#31837 = CARTESIAN_POINT('',(8.15,7.3,0.)); +#31838 = VECTOR('',#31839,1.); +#31839 = DIRECTION('',(-0.,-1.,-0.)); +#31840 = ORIENTED_EDGE('',*,*,#31841,.F.); +#31841 = EDGE_CURVE('',#31842,#31834,#31844,.T.); +#31842 = VERTEX_POINT('',#31843); +#31843 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#31844 = LINE('',#31845,#31846); +#31845 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#31846 = VECTOR('',#31847,1.); +#31847 = DIRECTION('',(-1.,-0.,-0.)); +#31848 = ORIENTED_EDGE('',*,*,#31849,.F.); +#31849 = EDGE_CURVE('',#31850,#31842,#31852,.T.); +#31850 = VERTEX_POINT('',#31851); +#31851 = CARTESIAN_POINT('',(9.,1.9,0.)); +#31852 = LINE('',#31853,#31854); +#31853 = CARTESIAN_POINT('',(4.5,1.9,0.)); +#31854 = VECTOR('',#31855,1.); +#31855 = DIRECTION('',(-1.,0.,0.)); +#31856 = ORIENTED_EDGE('',*,*,#31857,.F.); +#31857 = EDGE_CURVE('',#31858,#31850,#31860,.T.); +#31858 = VERTEX_POINT('',#31859); +#31859 = CARTESIAN_POINT('',(9.,2.27,0.)); +#31860 = LINE('',#31861,#31862); +#31861 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31862 = VECTOR('',#31863,1.); +#31863 = DIRECTION('',(0.,-1.,0.)); +#31864 = ORIENTED_EDGE('',*,*,#31865,.F.); +#31865 = EDGE_CURVE('',#31866,#31858,#31868,.T.); +#31866 = VERTEX_POINT('',#31867); +#31867 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#31868 = LINE('',#31869,#31870); +#31869 = CARTESIAN_POINT('',(4.275,2.27,0.)); +#31870 = VECTOR('',#31871,1.); +#31871 = DIRECTION('',(1.,0.,0.)); +#31872 = ORIENTED_EDGE('',*,*,#31873,.T.); +#31873 = EDGE_CURVE('',#31866,#31874,#31876,.T.); +#31874 = VERTEX_POINT('',#31875); +#31875 = CARTESIAN_POINT('',(8.15,2.27,0.)); +#31876 = LINE('',#31877,#31878); +#31877 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#31878 = VECTOR('',#31879,1.); +#31879 = DIRECTION('',(-1.,-0.,-0.)); +#31880 = ORIENTED_EDGE('',*,*,#31881,.F.); +#31881 = EDGE_CURVE('',#31882,#31874,#31884,.T.); +#31882 = VERTEX_POINT('',#31883); +#31883 = CARTESIAN_POINT('',(8.15,3.17,0.)); +#31884 = LINE('',#31885,#31886); +#31885 = CARTESIAN_POINT('',(8.15,8.57,0.)); +#31886 = VECTOR('',#31887,1.); +#31887 = DIRECTION('',(-0.,-1.,-0.)); +#31888 = ORIENTED_EDGE('',*,*,#31889,.F.); +#31889 = EDGE_CURVE('',#31890,#31882,#31892,.T.); +#31890 = VERTEX_POINT('',#31891); +#31891 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#31892 = LINE('',#31893,#31894); +#31893 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#31894 = VECTOR('',#31895,1.); +#31895 = DIRECTION('',(-1.,-0.,-0.)); +#31896 = ORIENTED_EDGE('',*,*,#31897,.F.); +#31897 = EDGE_CURVE('',#31898,#31890,#31900,.T.); +#31898 = VERTEX_POINT('',#31899); +#31899 = CARTESIAN_POINT('',(9.,3.17,0.)); +#31900 = LINE('',#31901,#31902); +#31901 = CARTESIAN_POINT('',(4.5,3.17,0.)); +#31902 = VECTOR('',#31903,1.); +#31903 = DIRECTION('',(-1.,0.,0.)); +#31904 = ORIENTED_EDGE('',*,*,#31905,.F.); +#31905 = EDGE_CURVE('',#31906,#31898,#31908,.T.); +#31906 = VERTEX_POINT('',#31907); +#31907 = CARTESIAN_POINT('',(9.,3.54,0.)); +#31908 = LINE('',#31909,#31910); +#31909 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31910 = VECTOR('',#31911,1.); +#31911 = DIRECTION('',(0.,-1.,0.)); +#31912 = ORIENTED_EDGE('',*,*,#31913,.F.); +#31913 = EDGE_CURVE('',#31914,#31906,#31916,.T.); +#31914 = VERTEX_POINT('',#31915); +#31915 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#31916 = LINE('',#31917,#31918); +#31917 = CARTESIAN_POINT('',(4.275,3.54,0.)); +#31918 = VECTOR('',#31919,1.); +#31919 = DIRECTION('',(1.,0.,0.)); +#31920 = ORIENTED_EDGE('',*,*,#31921,.T.); +#31921 = EDGE_CURVE('',#31914,#31922,#31924,.T.); +#31922 = VERTEX_POINT('',#31923); +#31923 = CARTESIAN_POINT('',(8.15,3.54,0.)); +#31924 = LINE('',#31925,#31926); +#31925 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#31926 = VECTOR('',#31927,1.); +#31927 = DIRECTION('',(-1.,-0.,-0.)); +#31928 = ORIENTED_EDGE('',*,*,#31929,.F.); +#31929 = EDGE_CURVE('',#31930,#31922,#31932,.T.); +#31930 = VERTEX_POINT('',#31931); +#31931 = CARTESIAN_POINT('',(8.15,4.44,0.)); +#31932 = LINE('',#31933,#31934); +#31933 = CARTESIAN_POINT('',(8.15,9.84,0.)); +#31934 = VECTOR('',#31935,1.); +#31935 = DIRECTION('',(-0.,-1.,-0.)); +#31936 = ORIENTED_EDGE('',*,*,#31937,.F.); +#31937 = EDGE_CURVE('',#31938,#31930,#31940,.T.); +#31938 = VERTEX_POINT('',#31939); +#31939 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#31940 = LINE('',#31941,#31942); +#31941 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#31942 = VECTOR('',#31943,1.); +#31943 = DIRECTION('',(-1.,-0.,-0.)); +#31944 = ORIENTED_EDGE('',*,*,#31945,.F.); +#31945 = EDGE_CURVE('',#31946,#31938,#31948,.T.); +#31946 = VERTEX_POINT('',#31947); +#31947 = CARTESIAN_POINT('',(9.,4.44,0.)); +#31948 = LINE('',#31949,#31950); +#31949 = CARTESIAN_POINT('',(4.5,4.44,0.)); +#31950 = VECTOR('',#31951,1.); +#31951 = DIRECTION('',(-1.,0.,0.)); +#31952 = ORIENTED_EDGE('',*,*,#31953,.F.); +#31953 = EDGE_CURVE('',#31954,#31946,#31956,.T.); +#31954 = VERTEX_POINT('',#31955); +#31955 = CARTESIAN_POINT('',(9.,4.81,0.)); +#31956 = LINE('',#31957,#31958); +#31957 = CARTESIAN_POINT('',(9.,12.75,0.)); +#31958 = VECTOR('',#31959,1.); +#31959 = DIRECTION('',(0.,-1.,0.)); +#31960 = ORIENTED_EDGE('',*,*,#31961,.F.); +#31961 = EDGE_CURVE('',#31962,#31954,#31964,.T.); +#31962 = VERTEX_POINT('',#31963); +#31963 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#31964 = LINE('',#31965,#31966); +#31965 = CARTESIAN_POINT('',(4.275,4.81,0.)); +#31966 = VECTOR('',#31967,1.); +#31967 = DIRECTION('',(1.,0.,0.)); +#31968 = ORIENTED_EDGE('',*,*,#31969,.T.); +#31969 = EDGE_CURVE('',#31962,#31970,#31972,.T.); +#31970 = VERTEX_POINT('',#31971); +#31971 = CARTESIAN_POINT('',(8.15,4.81,0.)); +#31972 = LINE('',#31973,#31974); +#31973 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#31974 = VECTOR('',#31975,1.); +#31975 = DIRECTION('',(-1.,-0.,-0.)); +#31976 = ORIENTED_EDGE('',*,*,#31977,.F.); +#31977 = EDGE_CURVE('',#31978,#31970,#31980,.T.); +#31978 = VERTEX_POINT('',#31979); +#31979 = CARTESIAN_POINT('',(8.15,5.71,0.)); +#31980 = LINE('',#31981,#31982); +#31981 = CARTESIAN_POINT('',(8.15,11.11,0.)); +#31982 = VECTOR('',#31983,1.); +#31983 = DIRECTION('',(-0.,-1.,-0.)); +#31984 = ORIENTED_EDGE('',*,*,#31985,.F.); +#31985 = EDGE_CURVE('',#31986,#31978,#31988,.T.); +#31986 = VERTEX_POINT('',#31987); +#31987 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#31988 = LINE('',#31989,#31990); +#31989 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#31990 = VECTOR('',#31991,1.); +#31991 = DIRECTION('',(-1.,-0.,-0.)); +#31992 = ORIENTED_EDGE('',*,*,#31993,.F.); +#31993 = EDGE_CURVE('',#30121,#31986,#31994,.T.); +#31994 = LINE('',#31995,#31996); +#31995 = CARTESIAN_POINT('',(4.5,5.71,0.)); +#31996 = VECTOR('',#31997,1.); +#31997 = DIRECTION('',(-1.,0.,0.)); +#31998 = ORIENTED_EDGE('',*,*,#30120,.F.); +#31999 = FACE_BOUND('',#32000,.F.); +#32000 = EDGE_LOOP('',(#32001,#32011,#32019,#32027)); +#32001 = ORIENTED_EDGE('',*,*,#32002,.T.); +#32002 = EDGE_CURVE('',#32003,#32005,#32007,.T.); +#32003 = VERTEX_POINT('',#32004); +#32004 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#32005 = VERTEX_POINT('',#32006); +#32006 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#32007 = LINE('',#32008,#32009); +#32008 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#32009 = VECTOR('',#32010,1.); +#32010 = DIRECTION('',(1.,0.,0.)); +#32011 = ORIENTED_EDGE('',*,*,#32012,.T.); +#32012 = EDGE_CURVE('',#32005,#32013,#32015,.T.); +#32013 = VERTEX_POINT('',#32014); +#32014 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#32015 = LINE('',#32016,#32017); +#32016 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#32017 = VECTOR('',#32018,1.); +#32018 = DIRECTION('',(0.,-1.,0.)); +#32019 = ORIENTED_EDGE('',*,*,#32020,.T.); +#32020 = EDGE_CURVE('',#32013,#32021,#32023,.T.); +#32021 = VERTEX_POINT('',#32022); +#32022 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#32023 = LINE('',#32024,#32025); +#32024 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#32025 = VECTOR('',#32026,1.); +#32026 = DIRECTION('',(-1.,0.,0.)); +#32027 = ORIENTED_EDGE('',*,*,#32028,.T.); +#32028 = EDGE_CURVE('',#32021,#32003,#32029,.T.); +#32029 = LINE('',#32030,#32031); +#32030 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#32031 = VECTOR('',#32032,1.); +#32032 = DIRECTION('',(0.,1.,0.)); +#32033 = FACE_BOUND('',#32034,.F.); +#32034 = EDGE_LOOP('',(#32035,#32045,#32053,#32061)); +#32035 = ORIENTED_EDGE('',*,*,#32036,.T.); +#32036 = EDGE_CURVE('',#32037,#32039,#32041,.T.); +#32037 = VERTEX_POINT('',#32038); +#32038 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#32039 = VERTEX_POINT('',#32040); +#32040 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#32041 = LINE('',#32042,#32043); +#32042 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#32043 = VECTOR('',#32044,1.); +#32044 = DIRECTION('',(1.,0.,0.)); +#32045 = ORIENTED_EDGE('',*,*,#32046,.T.); +#32046 = EDGE_CURVE('',#32039,#32047,#32049,.T.); +#32047 = VERTEX_POINT('',#32048); +#32048 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#32049 = LINE('',#32050,#32051); +#32050 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#32051 = VECTOR('',#32052,1.); +#32052 = DIRECTION('',(0.,-1.,0.)); +#32053 = ORIENTED_EDGE('',*,*,#32054,.T.); +#32054 = EDGE_CURVE('',#32047,#32055,#32057,.T.); +#32055 = VERTEX_POINT('',#32056); +#32056 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#32057 = LINE('',#32058,#32059); +#32058 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#32059 = VECTOR('',#32060,1.); +#32060 = DIRECTION('',(-1.,0.,0.)); +#32061 = ORIENTED_EDGE('',*,*,#32062,.T.); +#32062 = EDGE_CURVE('',#32055,#32037,#32063,.T.); +#32063 = LINE('',#32064,#32065); +#32064 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#32065 = VECTOR('',#32066,1.); +#32066 = DIRECTION('',(0.,1.,0.)); +#32067 = FACE_BOUND('',#32068,.F.); +#32068 = EDGE_LOOP('',(#32069,#32079,#32087,#32095)); +#32069 = ORIENTED_EDGE('',*,*,#32070,.T.); +#32070 = EDGE_CURVE('',#32071,#32073,#32075,.T.); +#32071 = VERTEX_POINT('',#32072); +#32072 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#32073 = VERTEX_POINT('',#32074); +#32074 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#32075 = LINE('',#32076,#32077); +#32076 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#32077 = VECTOR('',#32078,1.); +#32078 = DIRECTION('',(1.,0.,0.)); +#32079 = ORIENTED_EDGE('',*,*,#32080,.T.); +#32080 = EDGE_CURVE('',#32073,#32081,#32083,.T.); +#32081 = VERTEX_POINT('',#32082); +#32082 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#32083 = LINE('',#32084,#32085); +#32084 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#32085 = VECTOR('',#32086,1.); +#32086 = DIRECTION('',(0.,-1.,0.)); +#32087 = ORIENTED_EDGE('',*,*,#32088,.T.); +#32088 = EDGE_CURVE('',#32081,#32089,#32091,.T.); +#32089 = VERTEX_POINT('',#32090); +#32090 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#32091 = LINE('',#32092,#32093); +#32092 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#32093 = VECTOR('',#32094,1.); +#32094 = DIRECTION('',(-1.,0.,0.)); +#32095 = ORIENTED_EDGE('',*,*,#32096,.T.); +#32096 = EDGE_CURVE('',#32089,#32071,#32097,.T.); +#32097 = LINE('',#32098,#32099); +#32098 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#32099 = VECTOR('',#32100,1.); +#32100 = DIRECTION('',(0.,1.,0.)); +#32101 = FACE_BOUND('',#32102,.F.); +#32102 = EDGE_LOOP('',(#32103,#32113,#32121,#32129)); +#32103 = ORIENTED_EDGE('',*,*,#32104,.T.); +#32104 = EDGE_CURVE('',#32105,#32107,#32109,.T.); +#32105 = VERTEX_POINT('',#32106); +#32106 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#32107 = VERTEX_POINT('',#32108); +#32108 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#32109 = LINE('',#32110,#32111); +#32110 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#32111 = VECTOR('',#32112,1.); +#32112 = DIRECTION('',(1.,0.,0.)); +#32113 = ORIENTED_EDGE('',*,*,#32114,.T.); +#32114 = EDGE_CURVE('',#32107,#32115,#32117,.T.); +#32115 = VERTEX_POINT('',#32116); +#32116 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#32117 = LINE('',#32118,#32119); +#32118 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#32119 = VECTOR('',#32120,1.); +#32120 = DIRECTION('',(0.,-1.,0.)); +#32121 = ORIENTED_EDGE('',*,*,#32122,.T.); +#32122 = EDGE_CURVE('',#32115,#32123,#32125,.T.); +#32123 = VERTEX_POINT('',#32124); +#32124 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#32125 = LINE('',#32126,#32127); +#32126 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#32127 = VECTOR('',#32128,1.); +#32128 = DIRECTION('',(-1.,0.,0.)); +#32129 = ORIENTED_EDGE('',*,*,#32130,.T.); +#32130 = EDGE_CURVE('',#32123,#32105,#32131,.T.); +#32131 = LINE('',#32132,#32133); +#32132 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#32133 = VECTOR('',#32134,1.); +#32134 = DIRECTION('',(0.,1.,0.)); +#32135 = FACE_BOUND('',#32136,.F.); +#32136 = EDGE_LOOP('',(#32137,#32147,#32155,#32163)); +#32137 = ORIENTED_EDGE('',*,*,#32138,.T.); +#32138 = EDGE_CURVE('',#32139,#32141,#32143,.T.); +#32139 = VERTEX_POINT('',#32140); +#32140 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#32141 = VERTEX_POINT('',#32142); +#32142 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#32143 = LINE('',#32144,#32145); +#32144 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#32145 = VECTOR('',#32146,1.); +#32146 = DIRECTION('',(1.,0.,0.)); +#32147 = ORIENTED_EDGE('',*,*,#32148,.T.); +#32148 = EDGE_CURVE('',#32141,#32149,#32151,.T.); +#32149 = VERTEX_POINT('',#32150); +#32150 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#32151 = LINE('',#32152,#32153); +#32152 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#32153 = VECTOR('',#32154,1.); +#32154 = DIRECTION('',(0.,-1.,0.)); +#32155 = ORIENTED_EDGE('',*,*,#32156,.T.); +#32156 = EDGE_CURVE('',#32149,#32157,#32159,.T.); +#32157 = VERTEX_POINT('',#32158); +#32158 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#32159 = LINE('',#32160,#32161); +#32160 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#32161 = VECTOR('',#32162,1.); +#32162 = DIRECTION('',(-1.,0.,0.)); +#32163 = ORIENTED_EDGE('',*,*,#32164,.T.); +#32164 = EDGE_CURVE('',#32157,#32139,#32165,.T.); +#32165 = LINE('',#32166,#32167); +#32166 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#32167 = VECTOR('',#32168,1.); +#32168 = DIRECTION('',(0.,1.,0.)); +#32169 = FACE_BOUND('',#32170,.F.); +#32170 = EDGE_LOOP('',(#32171,#32181,#32189,#32197)); +#32171 = ORIENTED_EDGE('',*,*,#32172,.T.); +#32172 = EDGE_CURVE('',#32173,#32175,#32177,.T.); +#32173 = VERTEX_POINT('',#32174); +#32174 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#32175 = VERTEX_POINT('',#32176); +#32176 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#32177 = LINE('',#32178,#32179); +#32178 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#32179 = VECTOR('',#32180,1.); +#32180 = DIRECTION('',(1.,0.,0.)); +#32181 = ORIENTED_EDGE('',*,*,#32182,.T.); +#32182 = EDGE_CURVE('',#32175,#32183,#32185,.T.); +#32183 = VERTEX_POINT('',#32184); +#32184 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#32185 = LINE('',#32186,#32187); +#32186 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#32187 = VECTOR('',#32188,1.); +#32188 = DIRECTION('',(0.,-1.,0.)); +#32189 = ORIENTED_EDGE('',*,*,#32190,.T.); +#32190 = EDGE_CURVE('',#32183,#32191,#32193,.T.); +#32191 = VERTEX_POINT('',#32192); +#32192 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#32193 = LINE('',#32194,#32195); +#32194 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#32195 = VECTOR('',#32196,1.); +#32196 = DIRECTION('',(-1.,0.,0.)); +#32197 = ORIENTED_EDGE('',*,*,#32198,.T.); +#32198 = EDGE_CURVE('',#32191,#32173,#32199,.T.); +#32199 = LINE('',#32200,#32201); +#32200 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#32201 = VECTOR('',#32202,1.); +#32202 = DIRECTION('',(0.,1.,0.)); +#32203 = FACE_BOUND('',#32204,.F.); +#32204 = EDGE_LOOP('',(#32205,#32215,#32223,#32231)); +#32205 = ORIENTED_EDGE('',*,*,#32206,.T.); +#32206 = EDGE_CURVE('',#32207,#32209,#32211,.T.); +#32207 = VERTEX_POINT('',#32208); +#32208 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#32209 = VERTEX_POINT('',#32210); +#32210 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#32211 = LINE('',#32212,#32213); +#32212 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#32213 = VECTOR('',#32214,1.); +#32214 = DIRECTION('',(1.,0.,0.)); +#32215 = ORIENTED_EDGE('',*,*,#32216,.T.); +#32216 = EDGE_CURVE('',#32209,#32217,#32219,.T.); +#32217 = VERTEX_POINT('',#32218); +#32218 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#32219 = LINE('',#32220,#32221); +#32220 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#32221 = VECTOR('',#32222,1.); +#32222 = DIRECTION('',(0.,-1.,0.)); +#32223 = ORIENTED_EDGE('',*,*,#32224,.T.); +#32224 = EDGE_CURVE('',#32217,#32225,#32227,.T.); +#32225 = VERTEX_POINT('',#32226); +#32226 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#32227 = LINE('',#32228,#32229); +#32228 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#32229 = VECTOR('',#32230,1.); +#32230 = DIRECTION('',(-1.,0.,0.)); +#32231 = ORIENTED_EDGE('',*,*,#32232,.T.); +#32232 = EDGE_CURVE('',#32225,#32207,#32233,.T.); +#32233 = LINE('',#32234,#32235); +#32234 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#32235 = VECTOR('',#32236,1.); +#32236 = DIRECTION('',(0.,1.,0.)); +#32237 = FACE_BOUND('',#32238,.F.); +#32238 = EDGE_LOOP('',(#32239,#32249,#32257,#32265)); +#32239 = ORIENTED_EDGE('',*,*,#32240,.T.); +#32240 = EDGE_CURVE('',#32241,#32243,#32245,.T.); +#32241 = VERTEX_POINT('',#32242); +#32242 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#32243 = VERTEX_POINT('',#32244); +#32244 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#32245 = LINE('',#32246,#32247); +#32246 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#32247 = VECTOR('',#32248,1.); +#32248 = DIRECTION('',(1.,0.,0.)); +#32249 = ORIENTED_EDGE('',*,*,#32250,.T.); +#32250 = EDGE_CURVE('',#32243,#32251,#32253,.T.); +#32251 = VERTEX_POINT('',#32252); +#32252 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#32253 = LINE('',#32254,#32255); +#32254 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#32255 = VECTOR('',#32256,1.); +#32256 = DIRECTION('',(0.,-1.,0.)); +#32257 = ORIENTED_EDGE('',*,*,#32258,.T.); +#32258 = EDGE_CURVE('',#32251,#32259,#32261,.T.); +#32259 = VERTEX_POINT('',#32260); +#32260 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#32261 = LINE('',#32262,#32263); +#32262 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#32263 = VECTOR('',#32264,1.); +#32264 = DIRECTION('',(-1.,0.,0.)); +#32265 = ORIENTED_EDGE('',*,*,#32266,.T.); +#32266 = EDGE_CURVE('',#32259,#32241,#32267,.T.); +#32267 = LINE('',#32268,#32269); +#32268 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#32269 = VECTOR('',#32270,1.); +#32270 = DIRECTION('',(0.,1.,0.)); +#32271 = FACE_BOUND('',#32272,.F.); +#32272 = EDGE_LOOP('',(#32273,#32283,#32291,#32299)); +#32273 = ORIENTED_EDGE('',*,*,#32274,.T.); +#32274 = EDGE_CURVE('',#32275,#32277,#32279,.T.); +#32275 = VERTEX_POINT('',#32276); +#32276 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#32277 = VERTEX_POINT('',#32278); +#32278 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#32279 = LINE('',#32280,#32281); +#32280 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#32281 = VECTOR('',#32282,1.); +#32282 = DIRECTION('',(1.,0.,0.)); +#32283 = ORIENTED_EDGE('',*,*,#32284,.T.); +#32284 = EDGE_CURVE('',#32277,#32285,#32287,.T.); +#32285 = VERTEX_POINT('',#32286); +#32286 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#32287 = LINE('',#32288,#32289); +#32288 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#32289 = VECTOR('',#32290,1.); +#32290 = DIRECTION('',(0.,-1.,0.)); +#32291 = ORIENTED_EDGE('',*,*,#32292,.T.); +#32292 = EDGE_CURVE('',#32285,#32293,#32295,.T.); +#32293 = VERTEX_POINT('',#32294); +#32294 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#32295 = LINE('',#32296,#32297); +#32296 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#32297 = VECTOR('',#32298,1.); +#32298 = DIRECTION('',(-1.,0.,0.)); +#32299 = ORIENTED_EDGE('',*,*,#32300,.T.); +#32300 = EDGE_CURVE('',#32293,#32275,#32301,.T.); +#32301 = LINE('',#32302,#32303); +#32302 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#32303 = VECTOR('',#32304,1.); +#32304 = DIRECTION('',(0.,1.,0.)); +#32305 = PLANE('',#32306); +#32306 = AXIS2_PLACEMENT_3D('',#32307,#32308,#32309); +#32307 = CARTESIAN_POINT('',(0.,0.,0.)); +#32308 = DIRECTION('',(0.,0.,1.)); +#32309 = DIRECTION('',(1.,0.,-0.)); +#32310 = ADVANCED_FACE('',(#32311,#33538,#33608),#33834,.T.); +#32311 = FACE_BOUND('',#32312,.T.); +#32312 = EDGE_LOOP('',(#32313,#32314,#32315,#32323,#32331,#32339,#32347, + #32355,#32363,#32371,#32379,#32387,#32395,#32403,#32411,#32419, + #32427,#32435,#32443,#32451,#32459,#32467,#32475,#32483,#32491, + #32499,#32507,#32515,#32523,#32531,#32539,#32547,#32555,#32563, + #32571,#32579,#32587,#32595,#32603,#32611,#32619,#32627,#32635, + #32643,#32651,#32659,#32667,#32675,#32683,#32691,#32699,#32707, + #32715,#32723,#32731,#32739,#32747,#32755,#32763,#32771,#32779, + #32787,#32795,#32803,#32811,#32819,#32827,#32835,#32843,#32851, + #32859,#32867,#32875,#32883,#32891,#32899,#32907,#32915,#32923, + #32931,#32939,#32947,#32955,#32963,#32971,#32979,#32987,#32995, + #33003,#33011,#33019,#33027,#33035,#33043,#33051,#33059,#33067, + #33075,#33083,#33091,#33099,#33107,#33115,#33123,#33131,#33139, + #33147,#33155,#33163,#33171,#33179,#33187,#33195,#33203,#33211, + #33219,#33227,#33235,#33243,#33251,#33259,#33267,#33275,#33283, + #33291,#33299,#33307,#33315,#33323,#33331,#33339,#33347,#33355, + #33363,#33371,#33379,#33387,#33395,#33403,#33411,#33419,#33427, + #33435,#33443,#33451,#33459,#33467,#33475,#33483,#33491,#33499, + #33507,#33515,#33523,#33531,#33537)); +#32313 = ORIENTED_EDGE('',*,*,#30051,.F.); +#32314 = ORIENTED_EDGE('',*,*,#30105,.F.); +#32315 = ORIENTED_EDGE('',*,*,#32316,.T.); +#32316 = EDGE_CURVE('',#30098,#32317,#32319,.T.); +#32317 = VERTEX_POINT('',#32318); +#32318 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#32319 = LINE('',#32320,#32321); +#32320 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#32321 = VECTOR('',#32322,1.); +#32322 = DIRECTION('',(1.,0.,0.)); +#32323 = ORIENTED_EDGE('',*,*,#32324,.T.); +#32324 = EDGE_CURVE('',#32317,#32325,#32327,.T.); +#32325 = VERTEX_POINT('',#32326); +#32326 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#32327 = LINE('',#32328,#32329); +#32328 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#32329 = VECTOR('',#32330,1.); +#32330 = DIRECTION('',(0.,-1.,0.)); +#32331 = ORIENTED_EDGE('',*,*,#32332,.T.); +#32332 = EDGE_CURVE('',#32325,#32333,#32335,.T.); +#32333 = VERTEX_POINT('',#32334); +#32334 = CARTESIAN_POINT('',(-9.,4.81,0.8)); +#32335 = LINE('',#32336,#32337); +#32336 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#32337 = VECTOR('',#32338,1.); +#32338 = DIRECTION('',(-1.,0.,0.)); +#32339 = ORIENTED_EDGE('',*,*,#32340,.F.); +#32340 = EDGE_CURVE('',#32341,#32333,#32343,.T.); +#32341 = VERTEX_POINT('',#32342); +#32342 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#32343 = LINE('',#32344,#32345); +#32344 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32345 = VECTOR('',#32346,1.); +#32346 = DIRECTION('',(0.,1.,0.)); +#32347 = ORIENTED_EDGE('',*,*,#32348,.T.); +#32348 = EDGE_CURVE('',#32341,#32349,#32351,.T.); +#32349 = VERTEX_POINT('',#32350); +#32350 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#32351 = LINE('',#32352,#32353); +#32352 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#32353 = VECTOR('',#32354,1.); +#32354 = DIRECTION('',(1.,0.,0.)); +#32355 = ORIENTED_EDGE('',*,*,#32356,.T.); +#32356 = EDGE_CURVE('',#32349,#32357,#32359,.T.); +#32357 = VERTEX_POINT('',#32358); +#32358 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#32359 = LINE('',#32360,#32361); +#32360 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#32361 = VECTOR('',#32362,1.); +#32362 = DIRECTION('',(0.,-1.,0.)); +#32363 = ORIENTED_EDGE('',*,*,#32364,.T.); +#32364 = EDGE_CURVE('',#32357,#32365,#32367,.T.); +#32365 = VERTEX_POINT('',#32366); +#32366 = CARTESIAN_POINT('',(-9.,3.54,0.8)); +#32367 = LINE('',#32368,#32369); +#32368 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#32369 = VECTOR('',#32370,1.); +#32370 = DIRECTION('',(-1.,0.,0.)); +#32371 = ORIENTED_EDGE('',*,*,#32372,.F.); +#32372 = EDGE_CURVE('',#32373,#32365,#32375,.T.); +#32373 = VERTEX_POINT('',#32374); +#32374 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#32375 = LINE('',#32376,#32377); +#32376 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32377 = VECTOR('',#32378,1.); +#32378 = DIRECTION('',(0.,1.,0.)); +#32379 = ORIENTED_EDGE('',*,*,#32380,.T.); +#32380 = EDGE_CURVE('',#32373,#32381,#32383,.T.); +#32381 = VERTEX_POINT('',#32382); +#32382 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#32383 = LINE('',#32384,#32385); +#32384 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#32385 = VECTOR('',#32386,1.); +#32386 = DIRECTION('',(1.,0.,0.)); +#32387 = ORIENTED_EDGE('',*,*,#32388,.T.); +#32388 = EDGE_CURVE('',#32381,#32389,#32391,.T.); +#32389 = VERTEX_POINT('',#32390); +#32390 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#32391 = LINE('',#32392,#32393); +#32392 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#32393 = VECTOR('',#32394,1.); +#32394 = DIRECTION('',(0.,-1.,0.)); +#32395 = ORIENTED_EDGE('',*,*,#32396,.T.); +#32396 = EDGE_CURVE('',#32389,#32397,#32399,.T.); +#32397 = VERTEX_POINT('',#32398); +#32398 = CARTESIAN_POINT('',(-9.,2.27,0.8)); +#32399 = LINE('',#32400,#32401); +#32400 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#32401 = VECTOR('',#32402,1.); +#32402 = DIRECTION('',(-1.,0.,0.)); +#32403 = ORIENTED_EDGE('',*,*,#32404,.F.); +#32404 = EDGE_CURVE('',#32405,#32397,#32407,.T.); +#32405 = VERTEX_POINT('',#32406); +#32406 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#32407 = LINE('',#32408,#32409); +#32408 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32409 = VECTOR('',#32410,1.); +#32410 = DIRECTION('',(0.,1.,0.)); +#32411 = ORIENTED_EDGE('',*,*,#32412,.T.); +#32412 = EDGE_CURVE('',#32405,#32413,#32415,.T.); +#32413 = VERTEX_POINT('',#32414); +#32414 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#32415 = LINE('',#32416,#32417); +#32416 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#32417 = VECTOR('',#32418,1.); +#32418 = DIRECTION('',(1.,0.,0.)); +#32419 = ORIENTED_EDGE('',*,*,#32420,.T.); +#32420 = EDGE_CURVE('',#32413,#32421,#32423,.T.); +#32421 = VERTEX_POINT('',#32422); +#32422 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#32423 = LINE('',#32424,#32425); +#32424 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#32425 = VECTOR('',#32426,1.); +#32426 = DIRECTION('',(0.,-1.,0.)); +#32427 = ORIENTED_EDGE('',*,*,#32428,.T.); +#32428 = EDGE_CURVE('',#32421,#32429,#32431,.T.); +#32429 = VERTEX_POINT('',#32430); +#32430 = CARTESIAN_POINT('',(-9.,1.,0.8)); +#32431 = LINE('',#32432,#32433); +#32432 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#32433 = VECTOR('',#32434,1.); +#32434 = DIRECTION('',(-1.,0.,0.)); +#32435 = ORIENTED_EDGE('',*,*,#32436,.F.); +#32436 = EDGE_CURVE('',#32437,#32429,#32439,.T.); +#32437 = VERTEX_POINT('',#32438); +#32438 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#32439 = LINE('',#32440,#32441); +#32440 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32441 = VECTOR('',#32442,1.); +#32442 = DIRECTION('',(0.,1.,0.)); +#32443 = ORIENTED_EDGE('',*,*,#32444,.T.); +#32444 = EDGE_CURVE('',#32437,#32445,#32447,.T.); +#32445 = VERTEX_POINT('',#32446); +#32446 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#32447 = LINE('',#32448,#32449); +#32448 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#32449 = VECTOR('',#32450,1.); +#32450 = DIRECTION('',(1.,0.,0.)); +#32451 = ORIENTED_EDGE('',*,*,#32452,.T.); +#32452 = EDGE_CURVE('',#32445,#32453,#32455,.T.); +#32453 = VERTEX_POINT('',#32454); +#32454 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#32455 = LINE('',#32456,#32457); +#32456 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#32457 = VECTOR('',#32458,1.); +#32458 = DIRECTION('',(0.,-1.,0.)); +#32459 = ORIENTED_EDGE('',*,*,#32460,.T.); +#32460 = EDGE_CURVE('',#32453,#32461,#32463,.T.); +#32461 = VERTEX_POINT('',#32462); +#32462 = CARTESIAN_POINT('',(-9.,-0.27,0.8)); +#32463 = LINE('',#32464,#32465); +#32464 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#32465 = VECTOR('',#32466,1.); +#32466 = DIRECTION('',(-1.,0.,0.)); +#32467 = ORIENTED_EDGE('',*,*,#32468,.F.); +#32468 = EDGE_CURVE('',#32469,#32461,#32471,.T.); +#32469 = VERTEX_POINT('',#32470); +#32470 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#32471 = LINE('',#32472,#32473); +#32472 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32473 = VECTOR('',#32474,1.); +#32474 = DIRECTION('',(0.,1.,0.)); +#32475 = ORIENTED_EDGE('',*,*,#32476,.T.); +#32476 = EDGE_CURVE('',#32469,#32477,#32479,.T.); +#32477 = VERTEX_POINT('',#32478); +#32478 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#32479 = LINE('',#32480,#32481); +#32480 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#32481 = VECTOR('',#32482,1.); +#32482 = DIRECTION('',(1.,0.,0.)); +#32483 = ORIENTED_EDGE('',*,*,#32484,.T.); +#32484 = EDGE_CURVE('',#32477,#32485,#32487,.T.); +#32485 = VERTEX_POINT('',#32486); +#32486 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#32487 = LINE('',#32488,#32489); +#32488 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#32489 = VECTOR('',#32490,1.); +#32490 = DIRECTION('',(0.,-1.,0.)); +#32491 = ORIENTED_EDGE('',*,*,#32492,.T.); +#32492 = EDGE_CURVE('',#32485,#32493,#32495,.T.); +#32493 = VERTEX_POINT('',#32494); +#32494 = CARTESIAN_POINT('',(-9.,-1.54,0.8)); +#32495 = LINE('',#32496,#32497); +#32496 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#32497 = VECTOR('',#32498,1.); +#32498 = DIRECTION('',(-1.,0.,0.)); +#32499 = ORIENTED_EDGE('',*,*,#32500,.F.); +#32500 = EDGE_CURVE('',#32501,#32493,#32503,.T.); +#32501 = VERTEX_POINT('',#32502); +#32502 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#32503 = LINE('',#32504,#32505); +#32504 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32505 = VECTOR('',#32506,1.); +#32506 = DIRECTION('',(0.,1.,0.)); +#32507 = ORIENTED_EDGE('',*,*,#32508,.T.); +#32508 = EDGE_CURVE('',#32501,#32509,#32511,.T.); +#32509 = VERTEX_POINT('',#32510); +#32510 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#32511 = LINE('',#32512,#32513); +#32512 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#32513 = VECTOR('',#32514,1.); +#32514 = DIRECTION('',(1.,0.,0.)); +#32515 = ORIENTED_EDGE('',*,*,#32516,.T.); +#32516 = EDGE_CURVE('',#32509,#32517,#32519,.T.); +#32517 = VERTEX_POINT('',#32518); +#32518 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#32519 = LINE('',#32520,#32521); +#32520 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#32521 = VECTOR('',#32522,1.); +#32522 = DIRECTION('',(0.,-1.,0.)); +#32523 = ORIENTED_EDGE('',*,*,#32524,.T.); +#32524 = EDGE_CURVE('',#32517,#32525,#32527,.T.); +#32525 = VERTEX_POINT('',#32526); +#32526 = CARTESIAN_POINT('',(-9.,-2.81,0.8)); +#32527 = LINE('',#32528,#32529); +#32528 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#32529 = VECTOR('',#32530,1.); +#32530 = DIRECTION('',(-1.,0.,0.)); +#32531 = ORIENTED_EDGE('',*,*,#32532,.F.); +#32532 = EDGE_CURVE('',#32533,#32525,#32535,.T.); +#32533 = VERTEX_POINT('',#32534); +#32534 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#32535 = LINE('',#32536,#32537); +#32536 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32537 = VECTOR('',#32538,1.); +#32538 = DIRECTION('',(0.,1.,0.)); +#32539 = ORIENTED_EDGE('',*,*,#32540,.T.); +#32540 = EDGE_CURVE('',#32533,#32541,#32543,.T.); +#32541 = VERTEX_POINT('',#32542); +#32542 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#32543 = LINE('',#32544,#32545); +#32544 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#32545 = VECTOR('',#32546,1.); +#32546 = DIRECTION('',(1.,0.,0.)); +#32547 = ORIENTED_EDGE('',*,*,#32548,.T.); +#32548 = EDGE_CURVE('',#32541,#32549,#32551,.T.); +#32549 = VERTEX_POINT('',#32550); +#32550 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#32551 = LINE('',#32552,#32553); +#32552 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#32553 = VECTOR('',#32554,1.); +#32554 = DIRECTION('',(0.,-1.,0.)); +#32555 = ORIENTED_EDGE('',*,*,#32556,.T.); +#32556 = EDGE_CURVE('',#32549,#32557,#32559,.T.); +#32557 = VERTEX_POINT('',#32558); +#32558 = CARTESIAN_POINT('',(-9.,-4.08,0.8)); +#32559 = LINE('',#32560,#32561); +#32560 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#32561 = VECTOR('',#32562,1.); +#32562 = DIRECTION('',(-1.,0.,0.)); +#32563 = ORIENTED_EDGE('',*,*,#32564,.F.); +#32564 = EDGE_CURVE('',#32565,#32557,#32567,.T.); +#32565 = VERTEX_POINT('',#32566); +#32566 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#32567 = LINE('',#32568,#32569); +#32568 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32569 = VECTOR('',#32570,1.); +#32570 = DIRECTION('',(0.,1.,0.)); +#32571 = ORIENTED_EDGE('',*,*,#32572,.T.); +#32572 = EDGE_CURVE('',#32565,#32573,#32575,.T.); +#32573 = VERTEX_POINT('',#32574); +#32574 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#32575 = LINE('',#32576,#32577); +#32576 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#32577 = VECTOR('',#32578,1.); +#32578 = DIRECTION('',(1.,0.,0.)); +#32579 = ORIENTED_EDGE('',*,*,#32580,.T.); +#32580 = EDGE_CURVE('',#32573,#32581,#32583,.T.); +#32581 = VERTEX_POINT('',#32582); +#32582 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#32583 = LINE('',#32584,#32585); +#32584 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#32585 = VECTOR('',#32586,1.); +#32586 = DIRECTION('',(0.,-1.,0.)); +#32587 = ORIENTED_EDGE('',*,*,#32588,.T.); +#32588 = EDGE_CURVE('',#32581,#32589,#32591,.T.); +#32589 = VERTEX_POINT('',#32590); +#32590 = CARTESIAN_POINT('',(-9.,-5.35,0.8)); +#32591 = LINE('',#32592,#32593); +#32592 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#32593 = VECTOR('',#32594,1.); +#32594 = DIRECTION('',(-1.,0.,0.)); +#32595 = ORIENTED_EDGE('',*,*,#32596,.F.); +#32596 = EDGE_CURVE('',#32597,#32589,#32599,.T.); +#32597 = VERTEX_POINT('',#32598); +#32598 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#32599 = LINE('',#32600,#32601); +#32600 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32601 = VECTOR('',#32602,1.); +#32602 = DIRECTION('',(0.,1.,0.)); +#32603 = ORIENTED_EDGE('',*,*,#32604,.T.); +#32604 = EDGE_CURVE('',#32597,#32605,#32607,.T.); +#32605 = VERTEX_POINT('',#32606); +#32606 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#32607 = LINE('',#32608,#32609); +#32608 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#32609 = VECTOR('',#32610,1.); +#32610 = DIRECTION('',(1.,0.,0.)); +#32611 = ORIENTED_EDGE('',*,*,#32612,.T.); +#32612 = EDGE_CURVE('',#32605,#32613,#32615,.T.); +#32613 = VERTEX_POINT('',#32614); +#32614 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#32615 = LINE('',#32616,#32617); +#32616 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#32617 = VECTOR('',#32618,1.); +#32618 = DIRECTION('',(0.,-1.,0.)); +#32619 = ORIENTED_EDGE('',*,*,#32620,.T.); +#32620 = EDGE_CURVE('',#32613,#32621,#32623,.T.); +#32621 = VERTEX_POINT('',#32622); +#32622 = CARTESIAN_POINT('',(-9.,-6.62,0.8)); +#32623 = LINE('',#32624,#32625); +#32624 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#32625 = VECTOR('',#32626,1.); +#32626 = DIRECTION('',(-1.,0.,0.)); +#32627 = ORIENTED_EDGE('',*,*,#32628,.F.); +#32628 = EDGE_CURVE('',#32629,#32621,#32631,.T.); +#32629 = VERTEX_POINT('',#32630); +#32630 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#32631 = LINE('',#32632,#32633); +#32632 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32633 = VECTOR('',#32634,1.); +#32634 = DIRECTION('',(0.,1.,0.)); +#32635 = ORIENTED_EDGE('',*,*,#32636,.T.); +#32636 = EDGE_CURVE('',#32629,#32637,#32639,.T.); +#32637 = VERTEX_POINT('',#32638); +#32638 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#32639 = LINE('',#32640,#32641); +#32640 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#32641 = VECTOR('',#32642,1.); +#32642 = DIRECTION('',(1.,0.,0.)); +#32643 = ORIENTED_EDGE('',*,*,#32644,.T.); +#32644 = EDGE_CURVE('',#32637,#32645,#32647,.T.); +#32645 = VERTEX_POINT('',#32646); +#32646 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#32647 = LINE('',#32648,#32649); +#32648 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#32649 = VECTOR('',#32650,1.); +#32650 = DIRECTION('',(0.,-1.,0.)); +#32651 = ORIENTED_EDGE('',*,*,#32652,.T.); +#32652 = EDGE_CURVE('',#32645,#32653,#32655,.T.); +#32653 = VERTEX_POINT('',#32654); +#32654 = CARTESIAN_POINT('',(-9.,-7.89,0.8)); +#32655 = LINE('',#32656,#32657); +#32656 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#32657 = VECTOR('',#32658,1.); +#32658 = DIRECTION('',(-1.,0.,0.)); +#32659 = ORIENTED_EDGE('',*,*,#32660,.F.); +#32660 = EDGE_CURVE('',#32661,#32653,#32663,.T.); +#32661 = VERTEX_POINT('',#32662); +#32662 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#32663 = LINE('',#32664,#32665); +#32664 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32665 = VECTOR('',#32666,1.); +#32666 = DIRECTION('',(0.,1.,0.)); +#32667 = ORIENTED_EDGE('',*,*,#32668,.T.); +#32668 = EDGE_CURVE('',#32661,#32669,#32671,.T.); +#32669 = VERTEX_POINT('',#32670); +#32670 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#32671 = LINE('',#32672,#32673); +#32672 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#32673 = VECTOR('',#32674,1.); +#32674 = DIRECTION('',(1.,0.,0.)); +#32675 = ORIENTED_EDGE('',*,*,#32676,.T.); +#32676 = EDGE_CURVE('',#32669,#32677,#32679,.T.); +#32677 = VERTEX_POINT('',#32678); +#32678 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#32679 = LINE('',#32680,#32681); +#32680 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#32681 = VECTOR('',#32682,1.); +#32682 = DIRECTION('',(0.,-1.,0.)); +#32683 = ORIENTED_EDGE('',*,*,#32684,.T.); +#32684 = EDGE_CURVE('',#32677,#32685,#32687,.T.); +#32685 = VERTEX_POINT('',#32686); +#32686 = CARTESIAN_POINT('',(-9.,-9.16,0.8)); +#32687 = LINE('',#32688,#32689); +#32688 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#32689 = VECTOR('',#32690,1.); +#32690 = DIRECTION('',(-1.,0.,0.)); +#32691 = ORIENTED_EDGE('',*,*,#32692,.F.); +#32692 = EDGE_CURVE('',#32693,#32685,#32695,.T.); +#32693 = VERTEX_POINT('',#32694); +#32694 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#32695 = LINE('',#32696,#32697); +#32696 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32697 = VECTOR('',#32698,1.); +#32698 = DIRECTION('',(0.,1.,0.)); +#32699 = ORIENTED_EDGE('',*,*,#32700,.T.); +#32700 = EDGE_CURVE('',#32693,#32701,#32703,.T.); +#32701 = VERTEX_POINT('',#32702); +#32702 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#32703 = LINE('',#32704,#32705); +#32704 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#32705 = VECTOR('',#32706,1.); +#32706 = DIRECTION('',(1.,0.,0.)); +#32707 = ORIENTED_EDGE('',*,*,#32708,.T.); +#32708 = EDGE_CURVE('',#32701,#32709,#32711,.T.); +#32709 = VERTEX_POINT('',#32710); +#32710 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#32711 = LINE('',#32712,#32713); +#32712 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#32713 = VECTOR('',#32714,1.); +#32714 = DIRECTION('',(0.,-1.,0.)); +#32715 = ORIENTED_EDGE('',*,*,#32716,.T.); +#32716 = EDGE_CURVE('',#32709,#32717,#32719,.T.); +#32717 = VERTEX_POINT('',#32718); +#32718 = CARTESIAN_POINT('',(-9.,-10.43,0.8)); +#32719 = LINE('',#32720,#32721); +#32720 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#32721 = VECTOR('',#32722,1.); +#32722 = DIRECTION('',(-1.,0.,0.)); +#32723 = ORIENTED_EDGE('',*,*,#32724,.F.); +#32724 = EDGE_CURVE('',#32725,#32717,#32727,.T.); +#32725 = VERTEX_POINT('',#32726); +#32726 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#32727 = LINE('',#32728,#32729); +#32728 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32729 = VECTOR('',#32730,1.); +#32730 = DIRECTION('',(0.,1.,0.)); +#32731 = ORIENTED_EDGE('',*,*,#32732,.T.); +#32732 = EDGE_CURVE('',#32725,#32733,#32735,.T.); +#32733 = VERTEX_POINT('',#32734); +#32734 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#32735 = LINE('',#32736,#32737); +#32736 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#32737 = VECTOR('',#32738,1.); +#32738 = DIRECTION('',(1.,0.,0.)); +#32739 = ORIENTED_EDGE('',*,*,#32740,.T.); +#32740 = EDGE_CURVE('',#32733,#32741,#32743,.T.); +#32741 = VERTEX_POINT('',#32742); +#32742 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#32743 = LINE('',#32744,#32745); +#32744 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#32745 = VECTOR('',#32746,1.); +#32746 = DIRECTION('',(0.,-1.,0.)); +#32747 = ORIENTED_EDGE('',*,*,#32748,.T.); +#32748 = EDGE_CURVE('',#32741,#32749,#32751,.T.); +#32749 = VERTEX_POINT('',#32750); +#32750 = CARTESIAN_POINT('',(-9.,-11.7,0.8)); +#32751 = LINE('',#32752,#32753); +#32752 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#32753 = VECTOR('',#32754,1.); +#32754 = DIRECTION('',(-1.,0.,0.)); +#32755 = ORIENTED_EDGE('',*,*,#32756,.F.); +#32756 = EDGE_CURVE('',#32757,#32749,#32759,.T.); +#32757 = VERTEX_POINT('',#32758); +#32758 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32759 = LINE('',#32760,#32761); +#32760 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#32761 = VECTOR('',#32762,1.); +#32762 = DIRECTION('',(0.,1.,0.)); +#32763 = ORIENTED_EDGE('',*,*,#32764,.F.); +#32764 = EDGE_CURVE('',#32765,#32757,#32767,.T.); +#32765 = VERTEX_POINT('',#32766); +#32766 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#32767 = LINE('',#32768,#32769); +#32768 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#32769 = VECTOR('',#32770,1.); +#32770 = DIRECTION('',(-1.,0.,0.)); +#32771 = ORIENTED_EDGE('',*,*,#32772,.T.); +#32772 = EDGE_CURVE('',#32765,#32773,#32775,.T.); +#32773 = VERTEX_POINT('',#32774); +#32774 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#32775 = LINE('',#32776,#32777); +#32776 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#32777 = VECTOR('',#32778,1.); +#32778 = DIRECTION('',(0.,1.,0.)); +#32779 = ORIENTED_EDGE('',*,*,#32780,.T.); +#32780 = EDGE_CURVE('',#32773,#32781,#32783,.T.); +#32781 = VERTEX_POINT('',#32782); +#32782 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#32783 = LINE('',#32784,#32785); +#32784 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#32785 = VECTOR('',#32786,1.); +#32786 = DIRECTION('',(1.,0.,0.)); +#32787 = ORIENTED_EDGE('',*,*,#32788,.T.); +#32788 = EDGE_CURVE('',#32781,#32789,#32791,.T.); +#32789 = VERTEX_POINT('',#32790); +#32790 = CARTESIAN_POINT('',(-5.265,-12.75,0.8)); +#32791 = LINE('',#32792,#32793); +#32792 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#32793 = VECTOR('',#32794,1.); +#32794 = DIRECTION('',(0.,-1.,0.)); +#32795 = ORIENTED_EDGE('',*,*,#32796,.F.); +#32796 = EDGE_CURVE('',#32797,#32789,#32799,.T.); +#32797 = VERTEX_POINT('',#32798); +#32798 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#32799 = LINE('',#32800,#32801); +#32800 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#32801 = VECTOR('',#32802,1.); +#32802 = DIRECTION('',(-1.,0.,0.)); +#32803 = ORIENTED_EDGE('',*,*,#32804,.T.); +#32804 = EDGE_CURVE('',#32797,#32805,#32807,.T.); +#32805 = VERTEX_POINT('',#32806); +#32806 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#32807 = LINE('',#32808,#32809); +#32808 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#32809 = VECTOR('',#32810,1.); +#32810 = DIRECTION('',(0.,1.,0.)); +#32811 = ORIENTED_EDGE('',*,*,#32812,.T.); +#32812 = EDGE_CURVE('',#32805,#32813,#32815,.T.); +#32813 = VERTEX_POINT('',#32814); +#32814 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#32815 = LINE('',#32816,#32817); +#32816 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#32817 = VECTOR('',#32818,1.); +#32818 = DIRECTION('',(1.,0.,0.)); +#32819 = ORIENTED_EDGE('',*,*,#32820,.T.); +#32820 = EDGE_CURVE('',#32813,#32821,#32823,.T.); +#32821 = VERTEX_POINT('',#32822); +#32822 = CARTESIAN_POINT('',(-3.995,-12.75,0.8)); +#32823 = LINE('',#32824,#32825); +#32824 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#32825 = VECTOR('',#32826,1.); +#32826 = DIRECTION('',(0.,-1.,0.)); +#32827 = ORIENTED_EDGE('',*,*,#32828,.F.); +#32828 = EDGE_CURVE('',#32829,#32821,#32831,.T.); +#32829 = VERTEX_POINT('',#32830); +#32830 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#32831 = LINE('',#32832,#32833); +#32832 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#32833 = VECTOR('',#32834,1.); +#32834 = DIRECTION('',(-1.,0.,0.)); +#32835 = ORIENTED_EDGE('',*,*,#32836,.T.); +#32836 = EDGE_CURVE('',#32829,#32837,#32839,.T.); +#32837 = VERTEX_POINT('',#32838); +#32838 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#32839 = LINE('',#32840,#32841); +#32840 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#32841 = VECTOR('',#32842,1.); +#32842 = DIRECTION('',(0.,1.,0.)); +#32843 = ORIENTED_EDGE('',*,*,#32844,.T.); +#32844 = EDGE_CURVE('',#32837,#32845,#32847,.T.); +#32845 = VERTEX_POINT('',#32846); +#32846 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#32847 = LINE('',#32848,#32849); +#32848 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#32849 = VECTOR('',#32850,1.); +#32850 = DIRECTION('',(1.,0.,0.)); +#32851 = ORIENTED_EDGE('',*,*,#32852,.T.); +#32852 = EDGE_CURVE('',#32845,#32853,#32855,.T.); +#32853 = VERTEX_POINT('',#32854); +#32854 = CARTESIAN_POINT('',(-2.725,-12.75,0.8)); +#32855 = LINE('',#32856,#32857); +#32856 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#32857 = VECTOR('',#32858,1.); +#32858 = DIRECTION('',(0.,-1.,0.)); +#32859 = ORIENTED_EDGE('',*,*,#32860,.F.); +#32860 = EDGE_CURVE('',#32861,#32853,#32863,.T.); +#32861 = VERTEX_POINT('',#32862); +#32862 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#32863 = LINE('',#32864,#32865); +#32864 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#32865 = VECTOR('',#32866,1.); +#32866 = DIRECTION('',(-1.,0.,0.)); +#32867 = ORIENTED_EDGE('',*,*,#32868,.T.); +#32868 = EDGE_CURVE('',#32861,#32869,#32871,.T.); +#32869 = VERTEX_POINT('',#32870); +#32870 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#32871 = LINE('',#32872,#32873); +#32872 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#32873 = VECTOR('',#32874,1.); +#32874 = DIRECTION('',(0.,1.,0.)); +#32875 = ORIENTED_EDGE('',*,*,#32876,.T.); +#32876 = EDGE_CURVE('',#32869,#32877,#32879,.T.); +#32877 = VERTEX_POINT('',#32878); +#32878 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#32879 = LINE('',#32880,#32881); +#32880 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#32881 = VECTOR('',#32882,1.); +#32882 = DIRECTION('',(1.,0.,0.)); +#32883 = ORIENTED_EDGE('',*,*,#32884,.T.); +#32884 = EDGE_CURVE('',#32877,#32885,#32887,.T.); +#32885 = VERTEX_POINT('',#32886); +#32886 = CARTESIAN_POINT('',(-1.455,-12.75,0.8)); +#32887 = LINE('',#32888,#32889); +#32888 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#32889 = VECTOR('',#32890,1.); +#32890 = DIRECTION('',(0.,-1.,0.)); +#32891 = ORIENTED_EDGE('',*,*,#32892,.F.); +#32892 = EDGE_CURVE('',#32893,#32885,#32895,.T.); +#32893 = VERTEX_POINT('',#32894); +#32894 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#32895 = LINE('',#32896,#32897); +#32896 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#32897 = VECTOR('',#32898,1.); +#32898 = DIRECTION('',(-1.,0.,0.)); +#32899 = ORIENTED_EDGE('',*,*,#32900,.T.); +#32900 = EDGE_CURVE('',#32893,#32901,#32903,.T.); +#32901 = VERTEX_POINT('',#32902); +#32902 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#32903 = LINE('',#32904,#32905); +#32904 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#32905 = VECTOR('',#32906,1.); +#32906 = DIRECTION('',(0.,1.,0.)); +#32907 = ORIENTED_EDGE('',*,*,#32908,.T.); +#32908 = EDGE_CURVE('',#32901,#32909,#32911,.T.); +#32909 = VERTEX_POINT('',#32910); +#32910 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#32911 = LINE('',#32912,#32913); +#32912 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#32913 = VECTOR('',#32914,1.); +#32914 = DIRECTION('',(1.,0.,0.)); +#32915 = ORIENTED_EDGE('',*,*,#32916,.T.); +#32916 = EDGE_CURVE('',#32909,#32917,#32919,.T.); +#32917 = VERTEX_POINT('',#32918); +#32918 = CARTESIAN_POINT('',(-0.185,-12.75,0.8)); +#32919 = LINE('',#32920,#32921); +#32920 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#32921 = VECTOR('',#32922,1.); +#32922 = DIRECTION('',(0.,-1.,0.)); +#32923 = ORIENTED_EDGE('',*,*,#32924,.F.); +#32924 = EDGE_CURVE('',#32925,#32917,#32927,.T.); +#32925 = VERTEX_POINT('',#32926); +#32926 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#32927 = LINE('',#32928,#32929); +#32928 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#32929 = VECTOR('',#32930,1.); +#32930 = DIRECTION('',(-1.,0.,0.)); +#32931 = ORIENTED_EDGE('',*,*,#32932,.F.); +#32932 = EDGE_CURVE('',#32933,#32925,#32935,.T.); +#32933 = VERTEX_POINT('',#32934); +#32934 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#32935 = LINE('',#32936,#32937); +#32936 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#32937 = VECTOR('',#32938,1.); +#32938 = DIRECTION('',(-0.,-1.,-0.)); +#32939 = ORIENTED_EDGE('',*,*,#32940,.F.); +#32940 = EDGE_CURVE('',#32941,#32933,#32943,.T.); +#32941 = VERTEX_POINT('',#32942); +#32942 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#32943 = LINE('',#32944,#32945); +#32944 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#32945 = VECTOR('',#32946,1.); +#32946 = DIRECTION('',(-1.,-0.,-0.)); +#32947 = ORIENTED_EDGE('',*,*,#32948,.F.); +#32948 = EDGE_CURVE('',#32949,#32941,#32951,.T.); +#32949 = VERTEX_POINT('',#32950); +#32950 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#32951 = LINE('',#32952,#32953); +#32952 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#32953 = VECTOR('',#32954,1.); +#32954 = DIRECTION('',(0.,1.,0.)); +#32955 = ORIENTED_EDGE('',*,*,#32956,.F.); +#32956 = EDGE_CURVE('',#32957,#32949,#32959,.T.); +#32957 = VERTEX_POINT('',#32958); +#32958 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#32959 = LINE('',#32960,#32961); +#32960 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#32961 = VECTOR('',#32962,1.); +#32962 = DIRECTION('',(-1.,0.,0.)); +#32963 = ORIENTED_EDGE('',*,*,#32964,.F.); +#32964 = EDGE_CURVE('',#32965,#32957,#32967,.T.); +#32965 = VERTEX_POINT('',#32966); +#32966 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#32967 = LINE('',#32968,#32969); +#32968 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#32969 = VECTOR('',#32970,1.); +#32970 = DIRECTION('',(-0.,-1.,-0.)); +#32971 = ORIENTED_EDGE('',*,*,#32972,.F.); +#32972 = EDGE_CURVE('',#32973,#32965,#32975,.T.); +#32973 = VERTEX_POINT('',#32974); +#32974 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#32975 = LINE('',#32976,#32977); +#32976 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#32977 = VECTOR('',#32978,1.); +#32978 = DIRECTION('',(-1.,-0.,-0.)); +#32979 = ORIENTED_EDGE('',*,*,#32980,.F.); +#32980 = EDGE_CURVE('',#32981,#32973,#32983,.T.); +#32981 = VERTEX_POINT('',#32982); +#32982 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#32983 = LINE('',#32984,#32985); +#32984 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#32985 = VECTOR('',#32986,1.); +#32986 = DIRECTION('',(0.,1.,0.)); +#32987 = ORIENTED_EDGE('',*,*,#32988,.F.); +#32988 = EDGE_CURVE('',#32989,#32981,#32991,.T.); +#32989 = VERTEX_POINT('',#32990); +#32990 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#32991 = LINE('',#32992,#32993); +#32992 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#32993 = VECTOR('',#32994,1.); +#32994 = DIRECTION('',(-1.,0.,0.)); +#32995 = ORIENTED_EDGE('',*,*,#32996,.F.); +#32996 = EDGE_CURVE('',#32997,#32989,#32999,.T.); +#32997 = VERTEX_POINT('',#32998); +#32998 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#32999 = LINE('',#33000,#33001); +#33000 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#33001 = VECTOR('',#33002,1.); +#33002 = DIRECTION('',(-0.,-1.,-0.)); +#33003 = ORIENTED_EDGE('',*,*,#33004,.F.); +#33004 = EDGE_CURVE('',#33005,#32997,#33007,.T.); +#33005 = VERTEX_POINT('',#33006); +#33006 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#33007 = LINE('',#33008,#33009); +#33008 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#33009 = VECTOR('',#33010,1.); +#33010 = DIRECTION('',(-1.,-0.,-0.)); +#33011 = ORIENTED_EDGE('',*,*,#33012,.F.); +#33012 = EDGE_CURVE('',#33013,#33005,#33015,.T.); +#33013 = VERTEX_POINT('',#33014); +#33014 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#33015 = LINE('',#33016,#33017); +#33016 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#33017 = VECTOR('',#33018,1.); +#33018 = DIRECTION('',(0.,1.,0.)); +#33019 = ORIENTED_EDGE('',*,*,#33020,.F.); +#33020 = EDGE_CURVE('',#33021,#33013,#33023,.T.); +#33021 = VERTEX_POINT('',#33022); +#33022 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#33023 = LINE('',#33024,#33025); +#33024 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#33025 = VECTOR('',#33026,1.); +#33026 = DIRECTION('',(-1.,0.,0.)); +#33027 = ORIENTED_EDGE('',*,*,#33028,.F.); +#33028 = EDGE_CURVE('',#33029,#33021,#33031,.T.); +#33029 = VERTEX_POINT('',#33030); +#33030 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#33031 = LINE('',#33032,#33033); +#33032 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#33033 = VECTOR('',#33034,1.); +#33034 = DIRECTION('',(-0.,-1.,-0.)); +#33035 = ORIENTED_EDGE('',*,*,#33036,.F.); +#33036 = EDGE_CURVE('',#33037,#33029,#33039,.T.); +#33037 = VERTEX_POINT('',#33038); +#33038 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#33039 = LINE('',#33040,#33041); +#33040 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#33041 = VECTOR('',#33042,1.); +#33042 = DIRECTION('',(-1.,-0.,-0.)); +#33043 = ORIENTED_EDGE('',*,*,#33044,.F.); +#33044 = EDGE_CURVE('',#33045,#33037,#33047,.T.); +#33045 = VERTEX_POINT('',#33046); +#33046 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#33047 = LINE('',#33048,#33049); +#33048 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#33049 = VECTOR('',#33050,1.); +#33050 = DIRECTION('',(0.,1.,0.)); +#33051 = ORIENTED_EDGE('',*,*,#33052,.F.); +#33052 = EDGE_CURVE('',#33053,#33045,#33055,.T.); +#33053 = VERTEX_POINT('',#33054); +#33054 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#33055 = LINE('',#33056,#33057); +#33056 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#33057 = VECTOR('',#33058,1.); +#33058 = DIRECTION('',(-1.,0.,0.)); +#33059 = ORIENTED_EDGE('',*,*,#33060,.F.); +#33060 = EDGE_CURVE('',#33061,#33053,#33063,.T.); +#33061 = VERTEX_POINT('',#33062); +#33062 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#33063 = LINE('',#33064,#33065); +#33064 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#33065 = VECTOR('',#33066,1.); +#33066 = DIRECTION('',(-0.,-1.,-0.)); +#33067 = ORIENTED_EDGE('',*,*,#33068,.F.); +#33068 = EDGE_CURVE('',#33069,#33061,#33071,.T.); +#33069 = VERTEX_POINT('',#33070); +#33070 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#33071 = LINE('',#33072,#33073); +#33072 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#33073 = VECTOR('',#33074,1.); +#33074 = DIRECTION('',(-1.,-0.,-0.)); +#33075 = ORIENTED_EDGE('',*,*,#33076,.F.); +#33076 = EDGE_CURVE('',#33077,#33069,#33079,.T.); +#33077 = VERTEX_POINT('',#33078); +#33078 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#33079 = LINE('',#33080,#33081); +#33080 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#33081 = VECTOR('',#33082,1.); +#33082 = DIRECTION('',(0.,1.,0.)); +#33083 = ORIENTED_EDGE('',*,*,#33084,.F.); +#33084 = EDGE_CURVE('',#33085,#33077,#33087,.T.); +#33085 = VERTEX_POINT('',#33086); +#33086 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#33087 = LINE('',#33088,#33089); +#33088 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#33089 = VECTOR('',#33090,1.); +#33090 = DIRECTION('',(-1.,0.,0.)); +#33091 = ORIENTED_EDGE('',*,*,#33092,.F.); +#33092 = EDGE_CURVE('',#33093,#33085,#33095,.T.); +#33093 = VERTEX_POINT('',#33094); +#33094 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#33095 = LINE('',#33096,#33097); +#33096 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33097 = VECTOR('',#33098,1.); +#33098 = DIRECTION('',(0.,-1.,0.)); +#33099 = ORIENTED_EDGE('',*,*,#33100,.F.); +#33100 = EDGE_CURVE('',#33101,#33093,#33103,.T.); +#33101 = VERTEX_POINT('',#33102); +#33102 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#33103 = LINE('',#33104,#33105); +#33104 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#33105 = VECTOR('',#33106,1.); +#33106 = DIRECTION('',(1.,0.,0.)); +#33107 = ORIENTED_EDGE('',*,*,#33108,.F.); +#33108 = EDGE_CURVE('',#33109,#33101,#33111,.T.); +#33109 = VERTEX_POINT('',#33110); +#33110 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#33111 = LINE('',#33112,#33113); +#33112 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#33113 = VECTOR('',#33114,1.); +#33114 = DIRECTION('',(-0.,-1.,-0.)); +#33115 = ORIENTED_EDGE('',*,*,#33116,.F.); +#33116 = EDGE_CURVE('',#33117,#33109,#33119,.T.); +#33117 = VERTEX_POINT('',#33118); +#33118 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#33119 = LINE('',#33120,#33121); +#33120 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#33121 = VECTOR('',#33122,1.); +#33122 = DIRECTION('',(-1.,-0.,-0.)); +#33123 = ORIENTED_EDGE('',*,*,#33124,.F.); +#33124 = EDGE_CURVE('',#33125,#33117,#33127,.T.); +#33125 = VERTEX_POINT('',#33126); +#33126 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#33127 = LINE('',#33128,#33129); +#33128 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33129 = VECTOR('',#33130,1.); +#33130 = DIRECTION('',(0.,-1.,0.)); +#33131 = ORIENTED_EDGE('',*,*,#33132,.F.); +#33132 = EDGE_CURVE('',#33133,#33125,#33135,.T.); +#33133 = VERTEX_POINT('',#33134); +#33134 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#33135 = LINE('',#33136,#33137); +#33136 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#33137 = VECTOR('',#33138,1.); +#33138 = DIRECTION('',(1.,0.,0.)); +#33139 = ORIENTED_EDGE('',*,*,#33140,.F.); +#33140 = EDGE_CURVE('',#33141,#33133,#33143,.T.); +#33141 = VERTEX_POINT('',#33142); +#33142 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#33143 = LINE('',#33144,#33145); +#33144 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#33145 = VECTOR('',#33146,1.); +#33146 = DIRECTION('',(-0.,-1.,-0.)); +#33147 = ORIENTED_EDGE('',*,*,#33148,.F.); +#33148 = EDGE_CURVE('',#33149,#33141,#33151,.T.); +#33149 = VERTEX_POINT('',#33150); +#33150 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#33151 = LINE('',#33152,#33153); +#33152 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#33153 = VECTOR('',#33154,1.); +#33154 = DIRECTION('',(-1.,-0.,-0.)); +#33155 = ORIENTED_EDGE('',*,*,#33156,.F.); +#33156 = EDGE_CURVE('',#33157,#33149,#33159,.T.); +#33157 = VERTEX_POINT('',#33158); +#33158 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#33159 = LINE('',#33160,#33161); +#33160 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33161 = VECTOR('',#33162,1.); +#33162 = DIRECTION('',(0.,-1.,0.)); +#33163 = ORIENTED_EDGE('',*,*,#33164,.F.); +#33164 = EDGE_CURVE('',#33165,#33157,#33167,.T.); +#33165 = VERTEX_POINT('',#33166); +#33166 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#33167 = LINE('',#33168,#33169); +#33168 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#33169 = VECTOR('',#33170,1.); +#33170 = DIRECTION('',(1.,0.,0.)); +#33171 = ORIENTED_EDGE('',*,*,#33172,.F.); +#33172 = EDGE_CURVE('',#33173,#33165,#33175,.T.); +#33173 = VERTEX_POINT('',#33174); +#33174 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#33175 = LINE('',#33176,#33177); +#33176 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#33177 = VECTOR('',#33178,1.); +#33178 = DIRECTION('',(-0.,-1.,-0.)); +#33179 = ORIENTED_EDGE('',*,*,#33180,.F.); +#33180 = EDGE_CURVE('',#33181,#33173,#33183,.T.); +#33181 = VERTEX_POINT('',#33182); +#33182 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#33183 = LINE('',#33184,#33185); +#33184 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#33185 = VECTOR('',#33186,1.); +#33186 = DIRECTION('',(-1.,-0.,-0.)); +#33187 = ORIENTED_EDGE('',*,*,#33188,.F.); +#33188 = EDGE_CURVE('',#33189,#33181,#33191,.T.); +#33189 = VERTEX_POINT('',#33190); +#33190 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#33191 = LINE('',#33192,#33193); +#33192 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33193 = VECTOR('',#33194,1.); +#33194 = DIRECTION('',(0.,-1.,0.)); +#33195 = ORIENTED_EDGE('',*,*,#33196,.F.); +#33196 = EDGE_CURVE('',#33197,#33189,#33199,.T.); +#33197 = VERTEX_POINT('',#33198); +#33198 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#33199 = LINE('',#33200,#33201); +#33200 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#33201 = VECTOR('',#33202,1.); +#33202 = DIRECTION('',(1.,0.,0.)); +#33203 = ORIENTED_EDGE('',*,*,#33204,.F.); +#33204 = EDGE_CURVE('',#33205,#33197,#33207,.T.); +#33205 = VERTEX_POINT('',#33206); +#33206 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#33207 = LINE('',#33208,#33209); +#33208 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#33209 = VECTOR('',#33210,1.); +#33210 = DIRECTION('',(-0.,-1.,-0.)); +#33211 = ORIENTED_EDGE('',*,*,#33212,.F.); +#33212 = EDGE_CURVE('',#33213,#33205,#33215,.T.); +#33213 = VERTEX_POINT('',#33214); +#33214 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#33215 = LINE('',#33216,#33217); +#33216 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#33217 = VECTOR('',#33218,1.); +#33218 = DIRECTION('',(-1.,-0.,-0.)); +#33219 = ORIENTED_EDGE('',*,*,#33220,.F.); +#33220 = EDGE_CURVE('',#33221,#33213,#33223,.T.); +#33221 = VERTEX_POINT('',#33222); +#33222 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#33223 = LINE('',#33224,#33225); +#33224 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33225 = VECTOR('',#33226,1.); +#33226 = DIRECTION('',(0.,-1.,0.)); +#33227 = ORIENTED_EDGE('',*,*,#33228,.F.); +#33228 = EDGE_CURVE('',#33229,#33221,#33231,.T.); +#33229 = VERTEX_POINT('',#33230); +#33230 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#33231 = LINE('',#33232,#33233); +#33232 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#33233 = VECTOR('',#33234,1.); +#33234 = DIRECTION('',(1.,0.,0.)); +#33235 = ORIENTED_EDGE('',*,*,#33236,.F.); +#33236 = EDGE_CURVE('',#33237,#33229,#33239,.T.); +#33237 = VERTEX_POINT('',#33238); +#33238 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#33239 = LINE('',#33240,#33241); +#33240 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#33241 = VECTOR('',#33242,1.); +#33242 = DIRECTION('',(-0.,-1.,-0.)); +#33243 = ORIENTED_EDGE('',*,*,#33244,.F.); +#33244 = EDGE_CURVE('',#33245,#33237,#33247,.T.); +#33245 = VERTEX_POINT('',#33246); +#33246 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#33247 = LINE('',#33248,#33249); +#33248 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#33249 = VECTOR('',#33250,1.); +#33250 = DIRECTION('',(-1.,-0.,-0.)); +#33251 = ORIENTED_EDGE('',*,*,#33252,.F.); +#33252 = EDGE_CURVE('',#33253,#33245,#33255,.T.); +#33253 = VERTEX_POINT('',#33254); +#33254 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#33255 = LINE('',#33256,#33257); +#33256 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33257 = VECTOR('',#33258,1.); +#33258 = DIRECTION('',(0.,-1.,0.)); +#33259 = ORIENTED_EDGE('',*,*,#33260,.F.); +#33260 = EDGE_CURVE('',#33261,#33253,#33263,.T.); +#33261 = VERTEX_POINT('',#33262); +#33262 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#33263 = LINE('',#33264,#33265); +#33264 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#33265 = VECTOR('',#33266,1.); +#33266 = DIRECTION('',(1.,0.,0.)); +#33267 = ORIENTED_EDGE('',*,*,#33268,.F.); +#33268 = EDGE_CURVE('',#33269,#33261,#33271,.T.); +#33269 = VERTEX_POINT('',#33270); +#33270 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#33271 = LINE('',#33272,#33273); +#33272 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#33273 = VECTOR('',#33274,1.); +#33274 = DIRECTION('',(-0.,-1.,-0.)); +#33275 = ORIENTED_EDGE('',*,*,#33276,.F.); +#33276 = EDGE_CURVE('',#33277,#33269,#33279,.T.); +#33277 = VERTEX_POINT('',#33278); +#33278 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#33279 = LINE('',#33280,#33281); +#33280 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#33281 = VECTOR('',#33282,1.); +#33282 = DIRECTION('',(-1.,-0.,-0.)); +#33283 = ORIENTED_EDGE('',*,*,#33284,.F.); +#33284 = EDGE_CURVE('',#33285,#33277,#33287,.T.); +#33285 = VERTEX_POINT('',#33286); +#33286 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#33287 = LINE('',#33288,#33289); +#33288 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33289 = VECTOR('',#33290,1.); +#33290 = DIRECTION('',(0.,-1.,0.)); +#33291 = ORIENTED_EDGE('',*,*,#33292,.F.); +#33292 = EDGE_CURVE('',#33293,#33285,#33295,.T.); +#33293 = VERTEX_POINT('',#33294); +#33294 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#33295 = LINE('',#33296,#33297); +#33296 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#33297 = VECTOR('',#33298,1.); +#33298 = DIRECTION('',(1.,0.,0.)); +#33299 = ORIENTED_EDGE('',*,*,#33300,.F.); +#33300 = EDGE_CURVE('',#33301,#33293,#33303,.T.); +#33301 = VERTEX_POINT('',#33302); +#33302 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#33303 = LINE('',#33304,#33305); +#33304 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#33305 = VECTOR('',#33306,1.); +#33306 = DIRECTION('',(-0.,-1.,-0.)); +#33307 = ORIENTED_EDGE('',*,*,#33308,.F.); +#33308 = EDGE_CURVE('',#33309,#33301,#33311,.T.); +#33309 = VERTEX_POINT('',#33310); +#33310 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#33311 = LINE('',#33312,#33313); +#33312 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#33313 = VECTOR('',#33314,1.); +#33314 = DIRECTION('',(-1.,-0.,-0.)); +#33315 = ORIENTED_EDGE('',*,*,#33316,.F.); +#33316 = EDGE_CURVE('',#33317,#33309,#33319,.T.); +#33317 = VERTEX_POINT('',#33318); +#33318 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#33319 = LINE('',#33320,#33321); +#33320 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33321 = VECTOR('',#33322,1.); +#33322 = DIRECTION('',(0.,-1.,0.)); +#33323 = ORIENTED_EDGE('',*,*,#33324,.F.); +#33324 = EDGE_CURVE('',#33325,#33317,#33327,.T.); +#33325 = VERTEX_POINT('',#33326); +#33326 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#33327 = LINE('',#33328,#33329); +#33328 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#33329 = VECTOR('',#33330,1.); +#33330 = DIRECTION('',(1.,0.,0.)); +#33331 = ORIENTED_EDGE('',*,*,#33332,.F.); +#33332 = EDGE_CURVE('',#33333,#33325,#33335,.T.); +#33333 = VERTEX_POINT('',#33334); +#33334 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#33335 = LINE('',#33336,#33337); +#33336 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#33337 = VECTOR('',#33338,1.); +#33338 = DIRECTION('',(-0.,-1.,-0.)); +#33339 = ORIENTED_EDGE('',*,*,#33340,.F.); +#33340 = EDGE_CURVE('',#33341,#33333,#33343,.T.); +#33341 = VERTEX_POINT('',#33342); +#33342 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#33343 = LINE('',#33344,#33345); +#33344 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#33345 = VECTOR('',#33346,1.); +#33346 = DIRECTION('',(-1.,-0.,-0.)); +#33347 = ORIENTED_EDGE('',*,*,#33348,.F.); +#33348 = EDGE_CURVE('',#33349,#33341,#33351,.T.); +#33349 = VERTEX_POINT('',#33350); +#33350 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#33351 = LINE('',#33352,#33353); +#33352 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33353 = VECTOR('',#33354,1.); +#33354 = DIRECTION('',(0.,-1.,0.)); +#33355 = ORIENTED_EDGE('',*,*,#33356,.F.); +#33356 = EDGE_CURVE('',#33357,#33349,#33359,.T.); +#33357 = VERTEX_POINT('',#33358); +#33358 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#33359 = LINE('',#33360,#33361); +#33360 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#33361 = VECTOR('',#33362,1.); +#33362 = DIRECTION('',(1.,0.,0.)); +#33363 = ORIENTED_EDGE('',*,*,#33364,.F.); +#33364 = EDGE_CURVE('',#33365,#33357,#33367,.T.); +#33365 = VERTEX_POINT('',#33366); +#33366 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#33367 = LINE('',#33368,#33369); +#33368 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#33369 = VECTOR('',#33370,1.); +#33370 = DIRECTION('',(-0.,-1.,-0.)); +#33371 = ORIENTED_EDGE('',*,*,#33372,.F.); +#33372 = EDGE_CURVE('',#33373,#33365,#33375,.T.); +#33373 = VERTEX_POINT('',#33374); +#33374 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#33375 = LINE('',#33376,#33377); +#33376 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#33377 = VECTOR('',#33378,1.); +#33378 = DIRECTION('',(-1.,-0.,-0.)); +#33379 = ORIENTED_EDGE('',*,*,#33380,.F.); +#33380 = EDGE_CURVE('',#33381,#33373,#33383,.T.); +#33381 = VERTEX_POINT('',#33382); +#33382 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#33383 = LINE('',#33384,#33385); +#33384 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33385 = VECTOR('',#33386,1.); +#33386 = DIRECTION('',(0.,-1.,0.)); +#33387 = ORIENTED_EDGE('',*,*,#33388,.F.); +#33388 = EDGE_CURVE('',#33389,#33381,#33391,.T.); +#33389 = VERTEX_POINT('',#33390); +#33390 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#33391 = LINE('',#33392,#33393); +#33392 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#33393 = VECTOR('',#33394,1.); +#33394 = DIRECTION('',(1.,0.,0.)); +#33395 = ORIENTED_EDGE('',*,*,#33396,.F.); +#33396 = EDGE_CURVE('',#33397,#33389,#33399,.T.); +#33397 = VERTEX_POINT('',#33398); +#33398 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#33399 = LINE('',#33400,#33401); +#33400 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#33401 = VECTOR('',#33402,1.); +#33402 = DIRECTION('',(-0.,-1.,-0.)); +#33403 = ORIENTED_EDGE('',*,*,#33404,.F.); +#33404 = EDGE_CURVE('',#33405,#33397,#33407,.T.); +#33405 = VERTEX_POINT('',#33406); +#33406 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#33407 = LINE('',#33408,#33409); +#33408 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#33409 = VECTOR('',#33410,1.); +#33410 = DIRECTION('',(-1.,-0.,-0.)); +#33411 = ORIENTED_EDGE('',*,*,#33412,.F.); +#33412 = EDGE_CURVE('',#33413,#33405,#33415,.T.); +#33413 = VERTEX_POINT('',#33414); +#33414 = CARTESIAN_POINT('',(9.,1.,0.8)); +#33415 = LINE('',#33416,#33417); +#33416 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33417 = VECTOR('',#33418,1.); +#33418 = DIRECTION('',(0.,-1.,0.)); +#33419 = ORIENTED_EDGE('',*,*,#33420,.F.); +#33420 = EDGE_CURVE('',#33421,#33413,#33423,.T.); +#33421 = VERTEX_POINT('',#33422); +#33422 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#33423 = LINE('',#33424,#33425); +#33424 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#33425 = VECTOR('',#33426,1.); +#33426 = DIRECTION('',(1.,0.,0.)); +#33427 = ORIENTED_EDGE('',*,*,#33428,.F.); +#33428 = EDGE_CURVE('',#33429,#33421,#33431,.T.); +#33429 = VERTEX_POINT('',#33430); +#33430 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#33431 = LINE('',#33432,#33433); +#33432 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#33433 = VECTOR('',#33434,1.); +#33434 = DIRECTION('',(-0.,-1.,-0.)); +#33435 = ORIENTED_EDGE('',*,*,#33436,.F.); +#33436 = EDGE_CURVE('',#33437,#33429,#33439,.T.); +#33437 = VERTEX_POINT('',#33438); +#33438 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#33439 = LINE('',#33440,#33441); +#33440 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#33441 = VECTOR('',#33442,1.); +#33442 = DIRECTION('',(-1.,-0.,-0.)); +#33443 = ORIENTED_EDGE('',*,*,#33444,.F.); +#33444 = EDGE_CURVE('',#33445,#33437,#33447,.T.); +#33445 = VERTEX_POINT('',#33446); +#33446 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#33447 = LINE('',#33448,#33449); +#33448 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33449 = VECTOR('',#33450,1.); +#33450 = DIRECTION('',(0.,-1.,0.)); +#33451 = ORIENTED_EDGE('',*,*,#33452,.F.); +#33452 = EDGE_CURVE('',#33453,#33445,#33455,.T.); +#33453 = VERTEX_POINT('',#33454); +#33454 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#33455 = LINE('',#33456,#33457); +#33456 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#33457 = VECTOR('',#33458,1.); +#33458 = DIRECTION('',(1.,0.,0.)); +#33459 = ORIENTED_EDGE('',*,*,#33460,.F.); +#33460 = EDGE_CURVE('',#33461,#33453,#33463,.T.); +#33461 = VERTEX_POINT('',#33462); +#33462 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#33463 = LINE('',#33464,#33465); +#33464 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#33465 = VECTOR('',#33466,1.); +#33466 = DIRECTION('',(-0.,-1.,-0.)); +#33467 = ORIENTED_EDGE('',*,*,#33468,.F.); +#33468 = EDGE_CURVE('',#33469,#33461,#33471,.T.); +#33469 = VERTEX_POINT('',#33470); +#33470 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#33471 = LINE('',#33472,#33473); +#33472 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#33473 = VECTOR('',#33474,1.); +#33474 = DIRECTION('',(-1.,-0.,-0.)); +#33475 = ORIENTED_EDGE('',*,*,#33476,.F.); +#33476 = EDGE_CURVE('',#33477,#33469,#33479,.T.); +#33477 = VERTEX_POINT('',#33478); +#33478 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#33479 = LINE('',#33480,#33481); +#33480 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33481 = VECTOR('',#33482,1.); +#33482 = DIRECTION('',(0.,-1.,0.)); +#33483 = ORIENTED_EDGE('',*,*,#33484,.F.); +#33484 = EDGE_CURVE('',#33485,#33477,#33487,.T.); +#33485 = VERTEX_POINT('',#33486); +#33486 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#33487 = LINE('',#33488,#33489); +#33488 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#33489 = VECTOR('',#33490,1.); +#33490 = DIRECTION('',(1.,0.,0.)); +#33491 = ORIENTED_EDGE('',*,*,#33492,.F.); +#33492 = EDGE_CURVE('',#33493,#33485,#33495,.T.); +#33493 = VERTEX_POINT('',#33494); +#33494 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#33495 = LINE('',#33496,#33497); +#33496 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#33497 = VECTOR('',#33498,1.); +#33498 = DIRECTION('',(-0.,-1.,-0.)); +#33499 = ORIENTED_EDGE('',*,*,#33500,.F.); +#33500 = EDGE_CURVE('',#33501,#33493,#33503,.T.); +#33501 = VERTEX_POINT('',#33502); +#33502 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#33503 = LINE('',#33504,#33505); +#33504 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#33505 = VECTOR('',#33506,1.); +#33506 = DIRECTION('',(-1.,-0.,-0.)); +#33507 = ORIENTED_EDGE('',*,*,#33508,.F.); +#33508 = EDGE_CURVE('',#33509,#33501,#33511,.T.); +#33509 = VERTEX_POINT('',#33510); +#33510 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#33511 = LINE('',#33512,#33513); +#33512 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#33513 = VECTOR('',#33514,1.); +#33514 = DIRECTION('',(0.,-1.,0.)); +#33515 = ORIENTED_EDGE('',*,*,#33516,.F.); +#33516 = EDGE_CURVE('',#33517,#33509,#33519,.T.); +#33517 = VERTEX_POINT('',#33518); +#33518 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#33519 = LINE('',#33520,#33521); +#33520 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#33521 = VECTOR('',#33522,1.); +#33522 = DIRECTION('',(1.,0.,0.)); +#33523 = ORIENTED_EDGE('',*,*,#33524,.F.); +#33524 = EDGE_CURVE('',#33525,#33517,#33527,.T.); +#33525 = VERTEX_POINT('',#33526); +#33526 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#33527 = LINE('',#33528,#33529); +#33528 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#33529 = VECTOR('',#33530,1.); +#33530 = DIRECTION('',(-0.,-1.,-0.)); +#33531 = ORIENTED_EDGE('',*,*,#33532,.F.); +#33532 = EDGE_CURVE('',#30130,#33525,#33533,.T.); +#33533 = LINE('',#33534,#33535); +#33534 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#33535 = VECTOR('',#33536,1.); +#33536 = DIRECTION('',(-1.,-0.,-0.)); +#33537 = ORIENTED_EDGE('',*,*,#30129,.F.); +#33538 = FACE_BOUND('',#33539,.T.); +#33539 = EDGE_LOOP('',(#33540,#33551,#33559,#33568,#33576,#33585,#33593, + #33602)); +#33540 = ORIENTED_EDGE('',*,*,#33541,.F.); +#33541 = EDGE_CURVE('',#33542,#33544,#33546,.T.); +#33542 = VERTEX_POINT('',#33543); +#33543 = CARTESIAN_POINT('',(-7.65,5.9,0.8)); +#33544 = VERTEX_POINT('',#33545); +#33545 = CARTESIAN_POINT('',(-7.9,5.65,0.8)); +#33546 = CIRCLE('',#33547,0.25); +#33547 = AXIS2_PLACEMENT_3D('',#33548,#33549,#33550); +#33548 = CARTESIAN_POINT('',(-7.65,5.65,0.8)); +#33549 = DIRECTION('',(-0.,0.,1.)); +#33550 = DIRECTION('',(0.,-1.,0.)); +#33551 = ORIENTED_EDGE('',*,*,#33552,.T.); +#33552 = EDGE_CURVE('',#33542,#33553,#33555,.T.); +#33553 = VERTEX_POINT('',#33554); +#33554 = CARTESIAN_POINT('',(7.65,5.9,0.8)); +#33555 = LINE('',#33556,#33557); +#33556 = CARTESIAN_POINT('',(-7.9,5.9,0.8)); +#33557 = VECTOR('',#33558,1.); +#33558 = DIRECTION('',(1.,0.,0.)); +#33559 = ORIENTED_EDGE('',*,*,#33560,.T.); +#33560 = EDGE_CURVE('',#33553,#33561,#33563,.T.); +#33561 = VERTEX_POINT('',#33562); +#33562 = CARTESIAN_POINT('',(7.9,5.65,0.8)); +#33563 = CIRCLE('',#33564,0.25); +#33564 = AXIS2_PLACEMENT_3D('',#33565,#33566,#33567); +#33565 = CARTESIAN_POINT('',(7.65,5.65,0.8)); +#33566 = DIRECTION('',(-0.,-0.,-1.)); +#33567 = DIRECTION('',(0.,-1.,0.)); +#33568 = ORIENTED_EDGE('',*,*,#33569,.T.); +#33569 = EDGE_CURVE('',#33561,#33570,#33572,.T.); +#33570 = VERTEX_POINT('',#33571); +#33571 = CARTESIAN_POINT('',(7.9,-11.45,0.8)); +#33572 = LINE('',#33573,#33574); +#33573 = CARTESIAN_POINT('',(7.9,5.9,0.8)); +#33574 = VECTOR('',#33575,1.); +#33575 = DIRECTION('',(0.,-1.,0.)); +#33576 = ORIENTED_EDGE('',*,*,#33577,.T.); +#33577 = EDGE_CURVE('',#33570,#33578,#33580,.T.); +#33578 = VERTEX_POINT('',#33579); +#33579 = CARTESIAN_POINT('',(7.65,-11.7,0.8)); +#33580 = CIRCLE('',#33581,0.25); +#33581 = AXIS2_PLACEMENT_3D('',#33582,#33583,#33584); +#33582 = CARTESIAN_POINT('',(7.65,-11.45,0.8)); +#33583 = DIRECTION('',(-0.,-0.,-1.)); +#33584 = DIRECTION('',(0.,-1.,0.)); +#33585 = ORIENTED_EDGE('',*,*,#33586,.T.); +#33586 = EDGE_CURVE('',#33578,#33587,#33589,.T.); +#33587 = VERTEX_POINT('',#33588); +#33588 = CARTESIAN_POINT('',(-7.65,-11.7,0.8)); +#33589 = LINE('',#33590,#33591); +#33590 = CARTESIAN_POINT('',(7.9,-11.7,0.8)); +#33591 = VECTOR('',#33592,1.); +#33592 = DIRECTION('',(-1.,0.,0.)); +#33593 = ORIENTED_EDGE('',*,*,#33594,.T.); +#33594 = EDGE_CURVE('',#33587,#33595,#33597,.T.); +#33595 = VERTEX_POINT('',#33596); +#33596 = CARTESIAN_POINT('',(-7.9,-11.45,0.8)); +#33597 = CIRCLE('',#33598,0.25); +#33598 = AXIS2_PLACEMENT_3D('',#33599,#33600,#33601); +#33599 = CARTESIAN_POINT('',(-7.65,-11.45,0.8)); +#33600 = DIRECTION('',(-0.,-0.,-1.)); +#33601 = DIRECTION('',(0.,-1.,0.)); +#33602 = ORIENTED_EDGE('',*,*,#33603,.T.); +#33603 = EDGE_CURVE('',#33595,#33544,#33604,.T.); +#33604 = LINE('',#33605,#33606); +#33605 = CARTESIAN_POINT('',(-7.9,-11.7,0.8)); +#33606 = VECTOR('',#33607,1.); +#33607 = DIRECTION('',(0.,1.,0.)); +#33608 = FACE_BOUND('',#33609,.T.); +#33609 = EDGE_LOOP('',(#33610,#33620,#33628,#33636,#33644,#33652,#33660, + #33668,#33676,#33684,#33692,#33700,#33708,#33716,#33724,#33732, + #33740,#33748,#33756,#33764,#33772,#33780,#33788,#33796,#33804, + #33812,#33820,#33828)); +#33610 = ORIENTED_EDGE('',*,*,#33611,.F.); +#33611 = EDGE_CURVE('',#33612,#33614,#33616,.T.); +#33612 = VERTEX_POINT('',#33613); +#33613 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#33614 = VERTEX_POINT('',#33615); +#33615 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#33616 = LINE('',#33617,#33618); +#33617 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#33618 = VECTOR('',#33619,1.); +#33619 = DIRECTION('',(0.,1.,0.)); +#33620 = ORIENTED_EDGE('',*,*,#33621,.F.); +#33621 = EDGE_CURVE('',#33622,#33612,#33624,.T.); +#33622 = VERTEX_POINT('',#33623); +#33623 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#33624 = LINE('',#33625,#33626); +#33625 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#33626 = VECTOR('',#33627,1.); +#33627 = DIRECTION('',(1.,0.,0.)); +#33628 = ORIENTED_EDGE('',*,*,#33629,.F.); +#33629 = EDGE_CURVE('',#33630,#33622,#33632,.T.); +#33630 = VERTEX_POINT('',#33631); +#33631 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#33632 = LINE('',#33633,#33634); +#33633 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#33634 = VECTOR('',#33635,1.); +#33635 = DIRECTION('',(0.,-1.,0.)); +#33636 = ORIENTED_EDGE('',*,*,#33637,.F.); +#33637 = EDGE_CURVE('',#33638,#33630,#33640,.T.); +#33638 = VERTEX_POINT('',#33639); +#33639 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#33640 = LINE('',#33641,#33642); +#33641 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#33642 = VECTOR('',#33643,1.); +#33643 = DIRECTION('',(1.,0.,0.)); +#33644 = ORIENTED_EDGE('',*,*,#33645,.F.); +#33645 = EDGE_CURVE('',#33646,#33638,#33648,.T.); +#33646 = VERTEX_POINT('',#33647); +#33647 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#33648 = LINE('',#33649,#33650); +#33649 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#33650 = VECTOR('',#33651,1.); +#33651 = DIRECTION('',(0.,1.,0.)); +#33652 = ORIENTED_EDGE('',*,*,#33653,.F.); +#33653 = EDGE_CURVE('',#33654,#33646,#33656,.T.); +#33654 = VERTEX_POINT('',#33655); +#33655 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#33656 = LINE('',#33657,#33658); +#33657 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#33658 = VECTOR('',#33659,1.); +#33659 = DIRECTION('',(1.,0.,0.)); +#33660 = ORIENTED_EDGE('',*,*,#33661,.F.); +#33661 = EDGE_CURVE('',#33662,#33654,#33664,.T.); +#33662 = VERTEX_POINT('',#33663); +#33663 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#33664 = LINE('',#33665,#33666); +#33665 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#33666 = VECTOR('',#33667,1.); +#33667 = DIRECTION('',(0.,-1.,0.)); +#33668 = ORIENTED_EDGE('',*,*,#33669,.F.); +#33669 = EDGE_CURVE('',#33670,#33662,#33672,.T.); +#33670 = VERTEX_POINT('',#33671); +#33671 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#33672 = LINE('',#33673,#33674); +#33673 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#33674 = VECTOR('',#33675,1.); +#33675 = DIRECTION('',(1.,0.,0.)); +#33676 = ORIENTED_EDGE('',*,*,#33677,.F.); +#33677 = EDGE_CURVE('',#33678,#33670,#33680,.T.); +#33678 = VERTEX_POINT('',#33679); +#33679 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#33680 = LINE('',#33681,#33682); +#33681 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#33682 = VECTOR('',#33683,1.); +#33683 = DIRECTION('',(0.,1.,0.)); +#33684 = ORIENTED_EDGE('',*,*,#33685,.F.); +#33685 = EDGE_CURVE('',#33686,#33678,#33688,.T.); +#33686 = VERTEX_POINT('',#33687); +#33687 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#33688 = LINE('',#33689,#33690); +#33689 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#33690 = VECTOR('',#33691,1.); +#33691 = DIRECTION('',(1.,0.,0.)); +#33692 = ORIENTED_EDGE('',*,*,#33693,.F.); +#33693 = EDGE_CURVE('',#33694,#33686,#33696,.T.); +#33694 = VERTEX_POINT('',#33695); +#33695 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#33696 = LINE('',#33697,#33698); +#33697 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#33698 = VECTOR('',#33699,1.); +#33699 = DIRECTION('',(0.,-1.,0.)); +#33700 = ORIENTED_EDGE('',*,*,#33701,.F.); +#33701 = EDGE_CURVE('',#33702,#33694,#33704,.T.); +#33702 = VERTEX_POINT('',#33703); +#33703 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#33704 = LINE('',#33705,#33706); +#33705 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#33706 = VECTOR('',#33707,1.); +#33707 = DIRECTION('',(1.,0.,0.)); +#33708 = ORIENTED_EDGE('',*,*,#33709,.F.); +#33709 = EDGE_CURVE('',#33710,#33702,#33712,.T.); +#33710 = VERTEX_POINT('',#33711); +#33711 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#33712 = LINE('',#33713,#33714); +#33713 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#33714 = VECTOR('',#33715,1.); +#33715 = DIRECTION('',(0.,1.,0.)); +#33716 = ORIENTED_EDGE('',*,*,#33717,.F.); +#33717 = EDGE_CURVE('',#33718,#33710,#33720,.T.); +#33718 = VERTEX_POINT('',#33719); +#33719 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#33720 = LINE('',#33721,#33722); +#33721 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#33722 = VECTOR('',#33723,1.); +#33723 = DIRECTION('',(1.,0.,0.)); +#33724 = ORIENTED_EDGE('',*,*,#33725,.F.); +#33725 = EDGE_CURVE('',#33726,#33718,#33728,.T.); +#33726 = VERTEX_POINT('',#33727); +#33727 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#33728 = LINE('',#33729,#33730); +#33729 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#33730 = VECTOR('',#33731,1.); +#33731 = DIRECTION('',(0.,-1.,0.)); +#33732 = ORIENTED_EDGE('',*,*,#33733,.F.); +#33733 = EDGE_CURVE('',#33734,#33726,#33736,.T.); +#33734 = VERTEX_POINT('',#33735); +#33735 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#33736 = LINE('',#33737,#33738); +#33737 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#33738 = VECTOR('',#33739,1.); +#33739 = DIRECTION('',(1.,0.,0.)); +#33740 = ORIENTED_EDGE('',*,*,#33741,.F.); +#33741 = EDGE_CURVE('',#33742,#33734,#33744,.T.); +#33742 = VERTEX_POINT('',#33743); +#33743 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#33744 = LINE('',#33745,#33746); +#33745 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#33746 = VECTOR('',#33747,1.); +#33747 = DIRECTION('',(0.,1.,0.)); +#33748 = ORIENTED_EDGE('',*,*,#33749,.F.); +#33749 = EDGE_CURVE('',#33750,#33742,#33752,.T.); +#33750 = VERTEX_POINT('',#33751); +#33751 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#33752 = LINE('',#33753,#33754); +#33753 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#33754 = VECTOR('',#33755,1.); +#33755 = DIRECTION('',(1.,0.,0.)); +#33756 = ORIENTED_EDGE('',*,*,#33757,.F.); +#33757 = EDGE_CURVE('',#33758,#33750,#33760,.T.); +#33758 = VERTEX_POINT('',#33759); +#33759 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#33760 = LINE('',#33761,#33762); +#33761 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#33762 = VECTOR('',#33763,1.); +#33763 = DIRECTION('',(0.,-1.,0.)); +#33764 = ORIENTED_EDGE('',*,*,#33765,.F.); +#33765 = EDGE_CURVE('',#33766,#33758,#33768,.T.); +#33766 = VERTEX_POINT('',#33767); +#33767 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#33768 = LINE('',#33769,#33770); +#33769 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#33770 = VECTOR('',#33771,1.); +#33771 = DIRECTION('',(-1.,0.,0.)); +#33772 = ORIENTED_EDGE('',*,*,#33773,.F.); +#33773 = EDGE_CURVE('',#33774,#33766,#33776,.T.); +#33774 = VERTEX_POINT('',#33775); +#33775 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#33776 = LINE('',#33777,#33778); +#33777 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#33778 = VECTOR('',#33779,1.); +#33779 = DIRECTION('',(0.,1.,0.)); +#33780 = ORIENTED_EDGE('',*,*,#33781,.F.); +#33781 = EDGE_CURVE('',#33782,#33774,#33784,.T.); +#33782 = VERTEX_POINT('',#33783); +#33783 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#33784 = LINE('',#33785,#33786); +#33785 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#33786 = VECTOR('',#33787,1.); +#33787 = DIRECTION('',(-1.,0.,0.)); +#33788 = ORIENTED_EDGE('',*,*,#33789,.F.); +#33789 = EDGE_CURVE('',#33790,#33782,#33792,.T.); +#33790 = VERTEX_POINT('',#33791); +#33791 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#33792 = LINE('',#33793,#33794); +#33793 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#33794 = VECTOR('',#33795,1.); +#33795 = DIRECTION('',(0.,-1.,0.)); +#33796 = ORIENTED_EDGE('',*,*,#33797,.F.); +#33797 = EDGE_CURVE('',#33798,#33790,#33800,.T.); +#33798 = VERTEX_POINT('',#33799); +#33799 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#33800 = LINE('',#33801,#33802); +#33801 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#33802 = VECTOR('',#33803,1.); +#33803 = DIRECTION('',(-1.,0.,0.)); +#33804 = ORIENTED_EDGE('',*,*,#33805,.F.); +#33805 = EDGE_CURVE('',#33806,#33798,#33808,.T.); +#33806 = VERTEX_POINT('',#33807); +#33807 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#33808 = LINE('',#33809,#33810); +#33809 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#33810 = VECTOR('',#33811,1.); +#33811 = DIRECTION('',(0.,1.,0.)); +#33812 = ORIENTED_EDGE('',*,*,#33813,.F.); +#33813 = EDGE_CURVE('',#33814,#33806,#33816,.T.); +#33814 = VERTEX_POINT('',#33815); +#33815 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#33816 = LINE('',#33817,#33818); +#33817 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#33818 = VECTOR('',#33819,1.); +#33819 = DIRECTION('',(-1.,0.,0.)); +#33820 = ORIENTED_EDGE('',*,*,#33821,.F.); +#33821 = EDGE_CURVE('',#33822,#33814,#33824,.T.); +#33822 = VERTEX_POINT('',#33823); +#33823 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#33824 = LINE('',#33825,#33826); +#33825 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#33826 = VECTOR('',#33827,1.); +#33827 = DIRECTION('',(0.,-1.,0.)); +#33828 = ORIENTED_EDGE('',*,*,#33829,.F.); +#33829 = EDGE_CURVE('',#33614,#33822,#33830,.T.); +#33830 = LINE('',#33831,#33832); +#33831 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#33832 = VECTOR('',#33833,1.); +#33833 = DIRECTION('',(-1.,0.,0.)); +#33834 = PLANE('',#33835); +#33835 = AXIS2_PLACEMENT_3D('',#33836,#33837,#33838); +#33836 = CARTESIAN_POINT('',(0.,0.,0.8)); +#33837 = DIRECTION('',(0.,0.,1.)); +#33838 = DIRECTION('',(1.,0.,-0.)); +#33839 = ADVANCED_FACE('',(#33840),#33866,.F.); +#33840 = FACE_BOUND('',#33841,.F.); +#33841 = EDGE_LOOP('',(#33842,#33843,#33844,#33852,#33860)); +#33842 = ORIENTED_EDGE('',*,*,#30089,.F.); +#33843 = ORIENTED_EDGE('',*,*,#30097,.F.); +#33844 = ORIENTED_EDGE('',*,*,#33845,.T.); +#33845 = EDGE_CURVE('',#30098,#33846,#33848,.T.); +#33846 = VERTEX_POINT('',#33847); +#33847 = CARTESIAN_POINT('',(-9.,5.535,0.8)); +#33848 = LINE('',#33849,#33850); +#33849 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#33850 = VECTOR('',#33851,1.); +#33851 = DIRECTION('',(0.,-1.,0.)); +#33852 = ORIENTED_EDGE('',*,*,#33853,.F.); +#33853 = EDGE_CURVE('',#33854,#33846,#33856,.T.); +#33854 = VERTEX_POINT('',#33855); +#33855 = CARTESIAN_POINT('',(-9.,5.535,0.)); +#33856 = LINE('',#33857,#33858); +#33857 = CARTESIAN_POINT('',(-9.,5.535,0.)); +#33858 = VECTOR('',#33859,1.); +#33859 = DIRECTION('',(0.,0.,1.)); +#33860 = ORIENTED_EDGE('',*,*,#33861,.F.); +#33861 = EDGE_CURVE('',#30082,#33854,#33862,.T.); +#33862 = LINE('',#33863,#33864); +#33863 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#33864 = VECTOR('',#33865,1.); +#33865 = DIRECTION('',(0.,-1.,0.)); +#33866 = PLANE('',#33867); +#33867 = AXIS2_PLACEMENT_3D('',#33868,#33869,#33870); +#33868 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#33869 = DIRECTION('',(1.,0.,0.)); +#33870 = DIRECTION('',(0.,-1.,0.)); +#33871 = ADVANCED_FACE('',(#33872),#33906,.F.); +#33872 = FACE_BOUND('',#33873,.F.); +#33873 = EDGE_LOOP('',(#33874,#33884,#33892,#33898,#33899,#33900)); +#33874 = ORIENTED_EDGE('',*,*,#33875,.T.); +#33875 = EDGE_CURVE('',#33876,#33878,#33880,.T.); +#33876 = VERTEX_POINT('',#33877); +#33877 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.145767343E-06)); +#33878 = VERTEX_POINT('',#33879); +#33879 = CARTESIAN_POINT('',(9.000000023842,5.535,-2.145767343E-06)); +#33880 = LINE('',#33881,#33882); +#33881 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#33882 = VECTOR('',#33883,1.); +#33883 = DIRECTION('',(0.,-1.,0.)); +#33884 = ORIENTED_EDGE('',*,*,#33885,.T.); +#33885 = EDGE_CURVE('',#33878,#33886,#33888,.T.); +#33886 = VERTEX_POINT('',#33887); +#33887 = CARTESIAN_POINT('',(9.000000214576,5.535,0.799997854233)); +#33888 = LINE('',#33889,#33890); +#33889 = CARTESIAN_POINT('',(9.000000023842,5.535,-2.14576734264E-06)); +#33890 = VECTOR('',#33891,1.); +#33891 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33892 = ORIENTED_EDGE('',*,*,#33893,.F.); +#33893 = EDGE_CURVE('',#30138,#33886,#33894,.T.); +#33894 = LINE('',#33895,#33896); +#33895 = CARTESIAN_POINT('',(9.000000214576,5.71,0.799997854233)); +#33896 = VECTOR('',#33897,1.); +#33897 = DIRECTION('',(0.,-1.,0.)); +#33898 = ORIENTED_EDGE('',*,*,#30145,.T.); +#33899 = ORIENTED_EDGE('',*,*,#30153,.T.); +#33900 = ORIENTED_EDGE('',*,*,#33901,.F.); +#33901 = EDGE_CURVE('',#33876,#30121,#33902,.T.); +#33902 = LINE('',#33903,#33904); +#33903 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#33904 = VECTOR('',#33905,1.); +#33905 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33906 = PLANE('',#33907); +#33907 = AXIS2_PLACEMENT_3D('',#33908,#33909,#33910); +#33908 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#33909 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33910 = DIRECTION('',(0.,1.,0.)); +#33911 = ADVANCED_FACE('',(#33912),#33930,.T.); +#33912 = FACE_BOUND('',#33913,.F.); +#33913 = EDGE_LOOP('',(#33914,#33915,#33916,#33924)); +#33914 = ORIENTED_EDGE('',*,*,#33532,.F.); +#33915 = ORIENTED_EDGE('',*,*,#30137,.T.); +#33916 = ORIENTED_EDGE('',*,*,#33917,.T.); +#33917 = EDGE_CURVE('',#30138,#33918,#33920,.T.); +#33918 = VERTEX_POINT('',#33919); +#33919 = CARTESIAN_POINT('',(8.550000214576,5.71,0.799997961521)); +#33920 = LINE('',#33921,#33922); +#33921 = CARTESIAN_POINT('',(9.000000214576,5.71,0.799997854233)); +#33922 = VECTOR('',#33923,1.); +#33923 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33924 = ORIENTED_EDGE('',*,*,#33925,.F.); +#33925 = EDGE_CURVE('',#33525,#33918,#33926,.T.); +#33926 = LINE('',#33927,#33928); +#33927 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#33928 = VECTOR('',#33929,1.); +#33929 = DIRECTION('',(0.,0.,-1.)); +#33930 = PLANE('',#33931); +#33931 = AXIS2_PLACEMENT_3D('',#33932,#33933,#33934); +#33932 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#33933 = DIRECTION('',(-0.,-1.,-0.)); +#33934 = DIRECTION('',(1.,-0.,0.)); +#33935 = ADVANCED_FACE('',(#33936),#33959,.F.); +#33936 = FACE_BOUND('',#33937,.T.); +#33937 = EDGE_LOOP('',(#33938,#33947,#33948,#33949,#33950,#33951,#33952, + #33953)); +#33938 = ORIENTED_EDGE('',*,*,#33939,.T.); +#33939 = EDGE_CURVE('',#33940,#33854,#33942,.T.); +#33940 = VERTEX_POINT('',#33941); +#33941 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#33942 = CIRCLE('',#33943,0.275); +#33943 = AXIS2_PLACEMENT_3D('',#33944,#33945,#33946); +#33944 = CARTESIAN_POINT('',(-9.,5.26,0.)); +#33945 = DIRECTION('',(0.,0.,1.)); +#33946 = DIRECTION('',(1.,0.,-0.)); +#33947 = ORIENTED_EDGE('',*,*,#33861,.F.); +#33948 = ORIENTED_EDGE('',*,*,#30169,.T.); +#33949 = ORIENTED_EDGE('',*,*,#30177,.T.); +#33950 = ORIENTED_EDGE('',*,*,#30185,.T.); +#33951 = ORIENTED_EDGE('',*,*,#30193,.F.); +#33952 = ORIENTED_EDGE('',*,*,#30201,.T.); +#33953 = ORIENTED_EDGE('',*,*,#33954,.F.); +#33954 = EDGE_CURVE('',#33940,#30202,#33955,.T.); +#33955 = LINE('',#33956,#33957); +#33956 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#33957 = VECTOR('',#33958,1.); +#33958 = DIRECTION('',(0.,-1.,0.)); +#33959 = PLANE('',#33960); +#33960 = AXIS2_PLACEMENT_3D('',#33961,#33962,#33963); +#33961 = CARTESIAN_POINT('',(-8.571261896074,5.26,0.)); +#33962 = DIRECTION('',(0.,0.,1.)); +#33963 = DIRECTION('',(1.,0.,-0.)); +#33964 = ADVANCED_FACE('',(#33965),#33984,.T.); +#33965 = FACE_BOUND('',#33966,.F.); +#33966 = EDGE_LOOP('',(#33967,#33975,#33976,#33977,#33978)); +#33967 = ORIENTED_EDGE('',*,*,#33968,.F.); +#33968 = EDGE_CURVE('',#33876,#33969,#33971,.T.); +#33969 = VERTEX_POINT('',#33970); +#33970 = CARTESIAN_POINT('',(8.150000023842,5.71,-1.943111538E-06)); +#33971 = LINE('',#33972,#33973); +#33972 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#33973 = VECTOR('',#33974,1.); +#33974 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#33975 = ORIENTED_EDGE('',*,*,#33901,.T.); +#33976 = ORIENTED_EDGE('',*,*,#31993,.T.); +#33977 = ORIENTED_EDGE('',*,*,#31985,.T.); +#33978 = ORIENTED_EDGE('',*,*,#33979,.F.); +#33979 = EDGE_CURVE('',#33969,#31978,#33980,.T.); +#33980 = LINE('',#33981,#33982); +#33981 = CARTESIAN_POINT('',(8.150000023842,5.71,-1.94311153833E-06)); +#33982 = VECTOR('',#33983,1.); +#33983 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#33984 = PLANE('',#33985); +#33985 = AXIS2_PLACEMENT_3D('',#33986,#33987,#33988); +#33986 = CARTESIAN_POINT('',(9.000000023842,5.71,-2.14576734264E-06)); +#33987 = DIRECTION('',(0.,1.,0.)); +#33988 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#33989 = ADVANCED_FACE('',(#33990),#34008,.T.); +#33990 = FACE_BOUND('',#33991,.F.); +#33991 = EDGE_LOOP('',(#33992,#34000,#34001,#34002)); +#33992 = ORIENTED_EDGE('',*,*,#33993,.F.); +#33993 = EDGE_CURVE('',#33969,#33994,#33996,.T.); +#33994 = VERTEX_POINT('',#33995); +#33995 = CARTESIAN_POINT('',(8.150000023842,4.81,-1.943111538E-06)); +#33996 = LINE('',#33997,#33998); +#33997 = CARTESIAN_POINT('',(8.150000023842,5.71,-1.94311153833E-06)); +#33998 = VECTOR('',#33999,1.); +#33999 = DIRECTION('',(0.,-1.,0.)); +#34000 = ORIENTED_EDGE('',*,*,#33979,.T.); +#34001 = ORIENTED_EDGE('',*,*,#31977,.T.); +#34002 = ORIENTED_EDGE('',*,*,#34003,.F.); +#34003 = EDGE_CURVE('',#33994,#31970,#34004,.T.); +#34004 = LINE('',#34005,#34006); +#34005 = CARTESIAN_POINT('',(8.150000023842,4.81,-1.94311153833E-06)); +#34006 = VECTOR('',#34007,1.); +#34007 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34008 = PLANE('',#34009); +#34009 = AXIS2_PLACEMENT_3D('',#34010,#34011,#34012); +#34010 = CARTESIAN_POINT('',(8.150000023842,5.71,-1.94311153833E-06)); +#34011 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34012 = DIRECTION('',(0.,1.,0.)); +#34013 = ADVANCED_FACE('',(#34014),#34033,.T.); +#34014 = FACE_BOUND('',#34015,.F.); +#34015 = EDGE_LOOP('',(#34016,#34024,#34025,#34026,#34027)); +#34016 = ORIENTED_EDGE('',*,*,#34017,.F.); +#34017 = EDGE_CURVE('',#33994,#34018,#34020,.T.); +#34018 = VERTEX_POINT('',#34019); +#34019 = CARTESIAN_POINT('',(9.000000023842,4.81,-2.145767343E-06)); +#34020 = LINE('',#34021,#34022); +#34021 = CARTESIAN_POINT('',(8.150000023842,4.81,-1.94311153833E-06)); +#34022 = VECTOR('',#34023,1.); +#34023 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34024 = ORIENTED_EDGE('',*,*,#34003,.T.); +#34025 = ORIENTED_EDGE('',*,*,#31969,.F.); +#34026 = ORIENTED_EDGE('',*,*,#31961,.T.); +#34027 = ORIENTED_EDGE('',*,*,#34028,.F.); +#34028 = EDGE_CURVE('',#34018,#31954,#34029,.T.); +#34029 = LINE('',#34030,#34031); +#34030 = CARTESIAN_POINT('',(9.000000023842,4.81,-2.14576734264E-06)); +#34031 = VECTOR('',#34032,1.); +#34032 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34033 = PLANE('',#34034); +#34034 = AXIS2_PLACEMENT_3D('',#34035,#34036,#34037); +#34035 = CARTESIAN_POINT('',(8.150000023842,4.81,-1.94311153833E-06)); +#34036 = DIRECTION('',(0.,-1.,0.)); +#34037 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34038 = ADVANCED_FACE('',(#34039),#34071,.T.); +#34039 = FACE_BOUND('',#34040,.T.); +#34040 = EDGE_LOOP('',(#34041,#34042,#34050,#34056,#34057,#34065)); +#34041 = ORIENTED_EDGE('',*,*,#30209,.F.); +#34042 = ORIENTED_EDGE('',*,*,#34043,.F.); +#34043 = EDGE_CURVE('',#34044,#30210,#34046,.T.); +#34044 = VERTEX_POINT('',#34045); +#34045 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#34046 = LINE('',#34047,#34048); +#34047 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#34048 = VECTOR('',#34049,1.); +#34049 = DIRECTION('',(-0.,-0.,-1.)); +#34050 = ORIENTED_EDGE('',*,*,#34051,.F.); +#34051 = EDGE_CURVE('',#32341,#34044,#34052,.T.); +#34052 = LINE('',#34053,#34054); +#34053 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#34054 = VECTOR('',#34055,1.); +#34055 = DIRECTION('',(-0.,-0.,-1.)); +#34056 = ORIENTED_EDGE('',*,*,#32340,.T.); +#34057 = ORIENTED_EDGE('',*,*,#34058,.T.); +#34058 = EDGE_CURVE('',#32333,#34059,#34061,.T.); +#34059 = VERTEX_POINT('',#34060); +#34060 = CARTESIAN_POINT('',(-9.,4.81,0.4)); +#34061 = LINE('',#34062,#34063); +#34062 = CARTESIAN_POINT('',(-9.,4.81,0.8)); +#34063 = VECTOR('',#34064,1.); +#34064 = DIRECTION('',(-0.,-0.,-1.)); +#34065 = ORIENTED_EDGE('',*,*,#34066,.T.); +#34066 = EDGE_CURVE('',#34059,#30202,#34067,.T.); +#34067 = LINE('',#34068,#34069); +#34068 = CARTESIAN_POINT('',(-9.,4.81,0.4)); +#34069 = VECTOR('',#34070,1.); +#34070 = DIRECTION('',(-0.,-0.,-1.)); +#34071 = PLANE('',#34072); +#34072 = AXIS2_PLACEMENT_3D('',#34073,#34074,#34075); +#34073 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34074 = DIRECTION('',(-1.,0.,0.)); +#34075 = DIRECTION('',(0.,1.,0.)); +#34076 = ADVANCED_FACE('',(#34077),#34125,.T.); +#34077 = FACE_BOUND('',#34078,.T.); +#34078 = EDGE_LOOP('',(#34079,#34080,#34088,#34096,#34102,#34103,#34111, + #34119)); +#34079 = ORIENTED_EDGE('',*,*,#31953,.F.); +#34080 = ORIENTED_EDGE('',*,*,#34081,.F.); +#34081 = EDGE_CURVE('',#34082,#31954,#34084,.T.); +#34082 = VERTEX_POINT('',#34083); +#34083 = CARTESIAN_POINT('',(9.,4.81,0.4)); +#34084 = LINE('',#34085,#34086); +#34085 = CARTESIAN_POINT('',(9.,4.81,0.4)); +#34086 = VECTOR('',#34087,1.); +#34087 = DIRECTION('',(0.,0.,-1.)); +#34088 = ORIENTED_EDGE('',*,*,#34089,.F.); +#34089 = EDGE_CURVE('',#34090,#34082,#34092,.T.); +#34090 = VERTEX_POINT('',#34091); +#34091 = CARTESIAN_POINT('',(9.000000214576,4.81,0.799997854233)); +#34092 = LINE('',#34093,#34094); +#34093 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#34094 = VECTOR('',#34095,1.); +#34095 = DIRECTION('',(0.,0.,-1.)); +#34096 = ORIENTED_EDGE('',*,*,#34097,.F.); +#34097 = EDGE_CURVE('',#33509,#34090,#34098,.T.); +#34098 = LINE('',#34099,#34100); +#34099 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#34100 = VECTOR('',#34101,1.); +#34101 = DIRECTION('',(0.,0.,-1.)); +#34102 = ORIENTED_EDGE('',*,*,#33508,.T.); +#34103 = ORIENTED_EDGE('',*,*,#34104,.T.); +#34104 = EDGE_CURVE('',#33501,#34105,#34107,.T.); +#34105 = VERTEX_POINT('',#34106); +#34106 = CARTESIAN_POINT('',(9.000000214576,4.44,0.799997854233)); +#34107 = LINE('',#34108,#34109); +#34108 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#34109 = VECTOR('',#34110,1.); +#34110 = DIRECTION('',(0.,0.,-1.)); +#34111 = ORIENTED_EDGE('',*,*,#34112,.T.); +#34112 = EDGE_CURVE('',#34105,#34113,#34115,.T.); +#34113 = VERTEX_POINT('',#34114); +#34114 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#34115 = LINE('',#34116,#34117); +#34116 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#34117 = VECTOR('',#34118,1.); +#34118 = DIRECTION('',(0.,0.,-1.)); +#34119 = ORIENTED_EDGE('',*,*,#34120,.T.); +#34120 = EDGE_CURVE('',#34113,#31946,#34121,.T.); +#34121 = LINE('',#34122,#34123); +#34122 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#34123 = VECTOR('',#34124,1.); +#34124 = DIRECTION('',(0.,0.,-1.)); +#34125 = PLANE('',#34126); +#34126 = AXIS2_PLACEMENT_3D('',#34127,#34128,#34129); +#34127 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34128 = DIRECTION('',(1.,0.,0.)); +#34129 = DIRECTION('',(0.,-1.,0.)); +#34130 = ADVANCED_FACE('',(#34131),#34161,.F.); +#34131 = FACE_BOUND('',#34132,.T.); +#34132 = EDGE_LOOP('',(#34133,#34144,#34150,#34151,#34152,#34153,#34154, + #34155)); +#34133 = ORIENTED_EDGE('',*,*,#34134,.T.); +#34134 = EDGE_CURVE('',#34135,#34137,#34139,.T.); +#34135 = VERTEX_POINT('',#34136); +#34136 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#34137 = VERTEX_POINT('',#34138); +#34138 = CARTESIAN_POINT('',(-9.,4.265,0.)); +#34139 = CIRCLE('',#34140,0.275); +#34140 = AXIS2_PLACEMENT_3D('',#34141,#34142,#34143); +#34141 = CARTESIAN_POINT('',(-9.,3.99,0.)); +#34142 = DIRECTION('',(0.,0.,1.)); +#34143 = DIRECTION('',(1.,0.,-0.)); +#34144 = ORIENTED_EDGE('',*,*,#34145,.F.); +#34145 = EDGE_CURVE('',#30210,#34137,#34146,.T.); +#34146 = LINE('',#34147,#34148); +#34147 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#34148 = VECTOR('',#34149,1.); +#34149 = DIRECTION('',(0.,-1.,0.)); +#34150 = ORIENTED_EDGE('',*,*,#30217,.T.); +#34151 = ORIENTED_EDGE('',*,*,#30225,.T.); +#34152 = ORIENTED_EDGE('',*,*,#30233,.T.); +#34153 = ORIENTED_EDGE('',*,*,#30241,.F.); +#34154 = ORIENTED_EDGE('',*,*,#30249,.T.); +#34155 = ORIENTED_EDGE('',*,*,#34156,.F.); +#34156 = EDGE_CURVE('',#34135,#30250,#34157,.T.); +#34157 = LINE('',#34158,#34159); +#34158 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#34159 = VECTOR('',#34160,1.); +#34160 = DIRECTION('',(0.,-1.,0.)); +#34161 = PLANE('',#34162); +#34162 = AXIS2_PLACEMENT_3D('',#34163,#34164,#34165); +#34163 = CARTESIAN_POINT('',(-8.571261896074,3.99,0.)); +#34164 = DIRECTION('',(0.,0.,1.)); +#34165 = DIRECTION('',(1.,0.,-0.)); +#34166 = ADVANCED_FACE('',(#34167),#34193,.T.); +#34167 = FACE_BOUND('',#34168,.F.); +#34168 = EDGE_LOOP('',(#34169,#34179,#34185,#34186,#34187)); +#34169 = ORIENTED_EDGE('',*,*,#34170,.F.); +#34170 = EDGE_CURVE('',#34171,#34173,#34175,.T.); +#34171 = VERTEX_POINT('',#34172); +#34172 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.145767343E-06)); +#34173 = VERTEX_POINT('',#34174); +#34174 = CARTESIAN_POINT('',(8.150000023842,4.44,-1.943111538E-06)); +#34175 = LINE('',#34176,#34177); +#34176 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#34177 = VECTOR('',#34178,1.); +#34178 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34179 = ORIENTED_EDGE('',*,*,#34180,.T.); +#34180 = EDGE_CURVE('',#34171,#31946,#34181,.T.); +#34181 = LINE('',#34182,#34183); +#34182 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#34183 = VECTOR('',#34184,1.); +#34184 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34185 = ORIENTED_EDGE('',*,*,#31945,.T.); +#34186 = ORIENTED_EDGE('',*,*,#31937,.T.); +#34187 = ORIENTED_EDGE('',*,*,#34188,.F.); +#34188 = EDGE_CURVE('',#34173,#31930,#34189,.T.); +#34189 = LINE('',#34190,#34191); +#34190 = CARTESIAN_POINT('',(8.150000023842,4.44,-1.94311153833E-06)); +#34191 = VECTOR('',#34192,1.); +#34192 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34193 = PLANE('',#34194); +#34194 = AXIS2_PLACEMENT_3D('',#34195,#34196,#34197); +#34195 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#34196 = DIRECTION('',(0.,1.,0.)); +#34197 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34198 = ADVANCED_FACE('',(#34199),#34217,.T.); +#34199 = FACE_BOUND('',#34200,.F.); +#34200 = EDGE_LOOP('',(#34201,#34209,#34210,#34211)); +#34201 = ORIENTED_EDGE('',*,*,#34202,.F.); +#34202 = EDGE_CURVE('',#34173,#34203,#34205,.T.); +#34203 = VERTEX_POINT('',#34204); +#34204 = CARTESIAN_POINT('',(8.150000023842,3.54,-1.943111538E-06)); +#34205 = LINE('',#34206,#34207); +#34206 = CARTESIAN_POINT('',(8.150000023842,4.44,-1.94311153833E-06)); +#34207 = VECTOR('',#34208,1.); +#34208 = DIRECTION('',(0.,-1.,0.)); +#34209 = ORIENTED_EDGE('',*,*,#34188,.T.); +#34210 = ORIENTED_EDGE('',*,*,#31929,.T.); +#34211 = ORIENTED_EDGE('',*,*,#34212,.F.); +#34212 = EDGE_CURVE('',#34203,#31922,#34213,.T.); +#34213 = LINE('',#34214,#34215); +#34214 = CARTESIAN_POINT('',(8.150000023842,3.54,-1.94311153833E-06)); +#34215 = VECTOR('',#34216,1.); +#34216 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34217 = PLANE('',#34218); +#34218 = AXIS2_PLACEMENT_3D('',#34219,#34220,#34221); +#34219 = CARTESIAN_POINT('',(8.150000023842,4.44,-1.94311153833E-06)); +#34220 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34221 = DIRECTION('',(0.,1.,0.)); +#34222 = ADVANCED_FACE('',(#34223),#34242,.T.); +#34223 = FACE_BOUND('',#34224,.F.); +#34224 = EDGE_LOOP('',(#34225,#34233,#34234,#34235,#34236)); +#34225 = ORIENTED_EDGE('',*,*,#34226,.F.); +#34226 = EDGE_CURVE('',#34203,#34227,#34229,.T.); +#34227 = VERTEX_POINT('',#34228); +#34228 = CARTESIAN_POINT('',(9.000000023842,3.54,-2.145767343E-06)); +#34229 = LINE('',#34230,#34231); +#34230 = CARTESIAN_POINT('',(8.150000023842,3.54,-1.94311153833E-06)); +#34231 = VECTOR('',#34232,1.); +#34232 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34233 = ORIENTED_EDGE('',*,*,#34212,.T.); +#34234 = ORIENTED_EDGE('',*,*,#31921,.F.); +#34235 = ORIENTED_EDGE('',*,*,#31913,.T.); +#34236 = ORIENTED_EDGE('',*,*,#34237,.F.); +#34237 = EDGE_CURVE('',#34227,#31906,#34238,.T.); +#34238 = LINE('',#34239,#34240); +#34239 = CARTESIAN_POINT('',(9.000000023842,3.54,-2.14576734264E-06)); +#34240 = VECTOR('',#34241,1.); +#34241 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34242 = PLANE('',#34243); +#34243 = AXIS2_PLACEMENT_3D('',#34244,#34245,#34246); +#34244 = CARTESIAN_POINT('',(8.150000023842,3.54,-1.94311153833E-06)); +#34245 = DIRECTION('',(0.,-1.,0.)); +#34246 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34247 = ADVANCED_FACE('',(#34248),#34280,.T.); +#34248 = FACE_BOUND('',#34249,.T.); +#34249 = EDGE_LOOP('',(#34250,#34251,#34259,#34265,#34266,#34274)); +#34250 = ORIENTED_EDGE('',*,*,#30257,.F.); +#34251 = ORIENTED_EDGE('',*,*,#34252,.F.); +#34252 = EDGE_CURVE('',#34253,#30258,#34255,.T.); +#34253 = VERTEX_POINT('',#34254); +#34254 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#34255 = LINE('',#34256,#34257); +#34256 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#34257 = VECTOR('',#34258,1.); +#34258 = DIRECTION('',(-0.,-0.,-1.)); +#34259 = ORIENTED_EDGE('',*,*,#34260,.F.); +#34260 = EDGE_CURVE('',#32373,#34253,#34261,.T.); +#34261 = LINE('',#34262,#34263); +#34262 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#34263 = VECTOR('',#34264,1.); +#34264 = DIRECTION('',(-0.,-0.,-1.)); +#34265 = ORIENTED_EDGE('',*,*,#32372,.T.); +#34266 = ORIENTED_EDGE('',*,*,#34267,.T.); +#34267 = EDGE_CURVE('',#32365,#34268,#34270,.T.); +#34268 = VERTEX_POINT('',#34269); +#34269 = CARTESIAN_POINT('',(-9.,3.54,0.4)); +#34270 = LINE('',#34271,#34272); +#34271 = CARTESIAN_POINT('',(-9.,3.54,0.8)); +#34272 = VECTOR('',#34273,1.); +#34273 = DIRECTION('',(-0.,-0.,-1.)); +#34274 = ORIENTED_EDGE('',*,*,#34275,.T.); +#34275 = EDGE_CURVE('',#34268,#30250,#34276,.T.); +#34276 = LINE('',#34277,#34278); +#34277 = CARTESIAN_POINT('',(-9.,3.54,0.4)); +#34278 = VECTOR('',#34279,1.); +#34279 = DIRECTION('',(-0.,-0.,-1.)); +#34280 = PLANE('',#34281); +#34281 = AXIS2_PLACEMENT_3D('',#34282,#34283,#34284); +#34282 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34283 = DIRECTION('',(-1.,0.,0.)); +#34284 = DIRECTION('',(0.,1.,0.)); +#34285 = ADVANCED_FACE('',(#34286),#34334,.T.); +#34286 = FACE_BOUND('',#34287,.T.); +#34287 = EDGE_LOOP('',(#34288,#34289,#34297,#34305,#34311,#34312,#34320, + #34328)); +#34288 = ORIENTED_EDGE('',*,*,#31905,.F.); +#34289 = ORIENTED_EDGE('',*,*,#34290,.F.); +#34290 = EDGE_CURVE('',#34291,#31906,#34293,.T.); +#34291 = VERTEX_POINT('',#34292); +#34292 = CARTESIAN_POINT('',(9.,3.54,0.4)); +#34293 = LINE('',#34294,#34295); +#34294 = CARTESIAN_POINT('',(9.,3.54,0.4)); +#34295 = VECTOR('',#34296,1.); +#34296 = DIRECTION('',(0.,0.,-1.)); +#34297 = ORIENTED_EDGE('',*,*,#34298,.F.); +#34298 = EDGE_CURVE('',#34299,#34291,#34301,.T.); +#34299 = VERTEX_POINT('',#34300); +#34300 = CARTESIAN_POINT('',(9.000000214576,3.54,0.799997854233)); +#34301 = LINE('',#34302,#34303); +#34302 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#34303 = VECTOR('',#34304,1.); +#34304 = DIRECTION('',(0.,0.,-1.)); +#34305 = ORIENTED_EDGE('',*,*,#34306,.F.); +#34306 = EDGE_CURVE('',#33477,#34299,#34307,.T.); +#34307 = LINE('',#34308,#34309); +#34308 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#34309 = VECTOR('',#34310,1.); +#34310 = DIRECTION('',(0.,0.,-1.)); +#34311 = ORIENTED_EDGE('',*,*,#33476,.T.); +#34312 = ORIENTED_EDGE('',*,*,#34313,.T.); +#34313 = EDGE_CURVE('',#33469,#34314,#34316,.T.); +#34314 = VERTEX_POINT('',#34315); +#34315 = CARTESIAN_POINT('',(9.000000214576,3.17,0.799997854233)); +#34316 = LINE('',#34317,#34318); +#34317 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#34318 = VECTOR('',#34319,1.); +#34319 = DIRECTION('',(0.,0.,-1.)); +#34320 = ORIENTED_EDGE('',*,*,#34321,.T.); +#34321 = EDGE_CURVE('',#34314,#34322,#34324,.T.); +#34322 = VERTEX_POINT('',#34323); +#34323 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#34324 = LINE('',#34325,#34326); +#34325 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#34326 = VECTOR('',#34327,1.); +#34327 = DIRECTION('',(0.,0.,-1.)); +#34328 = ORIENTED_EDGE('',*,*,#34329,.T.); +#34329 = EDGE_CURVE('',#34322,#31898,#34330,.T.); +#34330 = LINE('',#34331,#34332); +#34331 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#34332 = VECTOR('',#34333,1.); +#34333 = DIRECTION('',(0.,0.,-1.)); +#34334 = PLANE('',#34335); +#34335 = AXIS2_PLACEMENT_3D('',#34336,#34337,#34338); +#34336 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34337 = DIRECTION('',(1.,0.,0.)); +#34338 = DIRECTION('',(0.,-1.,0.)); +#34339 = ADVANCED_FACE('',(#34340),#34370,.F.); +#34340 = FACE_BOUND('',#34341,.T.); +#34341 = EDGE_LOOP('',(#34342,#34353,#34359,#34360,#34361,#34362,#34363, + #34364)); +#34342 = ORIENTED_EDGE('',*,*,#34343,.T.); +#34343 = EDGE_CURVE('',#34344,#34346,#34348,.T.); +#34344 = VERTEX_POINT('',#34345); +#34345 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#34346 = VERTEX_POINT('',#34347); +#34347 = CARTESIAN_POINT('',(-9.,2.995,0.)); +#34348 = CIRCLE('',#34349,0.275); +#34349 = AXIS2_PLACEMENT_3D('',#34350,#34351,#34352); +#34350 = CARTESIAN_POINT('',(-9.,2.72,0.)); +#34351 = DIRECTION('',(0.,0.,1.)); +#34352 = DIRECTION('',(1.,0.,-0.)); +#34353 = ORIENTED_EDGE('',*,*,#34354,.F.); +#34354 = EDGE_CURVE('',#30258,#34346,#34355,.T.); +#34355 = LINE('',#34356,#34357); +#34356 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#34357 = VECTOR('',#34358,1.); +#34358 = DIRECTION('',(0.,-1.,0.)); +#34359 = ORIENTED_EDGE('',*,*,#30265,.T.); +#34360 = ORIENTED_EDGE('',*,*,#30273,.T.); +#34361 = ORIENTED_EDGE('',*,*,#30281,.T.); +#34362 = ORIENTED_EDGE('',*,*,#30289,.F.); +#34363 = ORIENTED_EDGE('',*,*,#30297,.T.); +#34364 = ORIENTED_EDGE('',*,*,#34365,.F.); +#34365 = EDGE_CURVE('',#34344,#30298,#34366,.T.); +#34366 = LINE('',#34367,#34368); +#34367 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#34368 = VECTOR('',#34369,1.); +#34369 = DIRECTION('',(0.,-1.,0.)); +#34370 = PLANE('',#34371); +#34371 = AXIS2_PLACEMENT_3D('',#34372,#34373,#34374); +#34372 = CARTESIAN_POINT('',(-8.571261896074,2.72,0.)); +#34373 = DIRECTION('',(0.,0.,1.)); +#34374 = DIRECTION('',(1.,0.,-0.)); +#34375 = ADVANCED_FACE('',(#34376),#34402,.T.); +#34376 = FACE_BOUND('',#34377,.F.); +#34377 = EDGE_LOOP('',(#34378,#34388,#34394,#34395,#34396)); +#34378 = ORIENTED_EDGE('',*,*,#34379,.F.); +#34379 = EDGE_CURVE('',#34380,#34382,#34384,.T.); +#34380 = VERTEX_POINT('',#34381); +#34381 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.145767343E-06)); +#34382 = VERTEX_POINT('',#34383); +#34383 = CARTESIAN_POINT('',(8.150000023842,3.17,-1.943111538E-06)); +#34384 = LINE('',#34385,#34386); +#34385 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#34386 = VECTOR('',#34387,1.); +#34387 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34388 = ORIENTED_EDGE('',*,*,#34389,.T.); +#34389 = EDGE_CURVE('',#34380,#31898,#34390,.T.); +#34390 = LINE('',#34391,#34392); +#34391 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#34392 = VECTOR('',#34393,1.); +#34393 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34394 = ORIENTED_EDGE('',*,*,#31897,.T.); +#34395 = ORIENTED_EDGE('',*,*,#31889,.T.); +#34396 = ORIENTED_EDGE('',*,*,#34397,.F.); +#34397 = EDGE_CURVE('',#34382,#31882,#34398,.T.); +#34398 = LINE('',#34399,#34400); +#34399 = CARTESIAN_POINT('',(8.150000023842,3.17,-1.94311153833E-06)); +#34400 = VECTOR('',#34401,1.); +#34401 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34402 = PLANE('',#34403); +#34403 = AXIS2_PLACEMENT_3D('',#34404,#34405,#34406); +#34404 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#34405 = DIRECTION('',(0.,1.,0.)); +#34406 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34407 = ADVANCED_FACE('',(#34408),#34426,.T.); +#34408 = FACE_BOUND('',#34409,.F.); +#34409 = EDGE_LOOP('',(#34410,#34418,#34419,#34420)); +#34410 = ORIENTED_EDGE('',*,*,#34411,.F.); +#34411 = EDGE_CURVE('',#34382,#34412,#34414,.T.); +#34412 = VERTEX_POINT('',#34413); +#34413 = CARTESIAN_POINT('',(8.150000023842,2.27,-1.943111538E-06)); +#34414 = LINE('',#34415,#34416); +#34415 = CARTESIAN_POINT('',(8.150000023842,3.17,-1.94311153833E-06)); +#34416 = VECTOR('',#34417,1.); +#34417 = DIRECTION('',(0.,-1.,0.)); +#34418 = ORIENTED_EDGE('',*,*,#34397,.T.); +#34419 = ORIENTED_EDGE('',*,*,#31881,.T.); +#34420 = ORIENTED_EDGE('',*,*,#34421,.F.); +#34421 = EDGE_CURVE('',#34412,#31874,#34422,.T.); +#34422 = LINE('',#34423,#34424); +#34423 = CARTESIAN_POINT('',(8.150000023842,2.27,-1.94311153833E-06)); +#34424 = VECTOR('',#34425,1.); +#34425 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34426 = PLANE('',#34427); +#34427 = AXIS2_PLACEMENT_3D('',#34428,#34429,#34430); +#34428 = CARTESIAN_POINT('',(8.150000023842,3.17,-1.94311153833E-06)); +#34429 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34430 = DIRECTION('',(0.,1.,0.)); +#34431 = ADVANCED_FACE('',(#34432),#34451,.T.); +#34432 = FACE_BOUND('',#34433,.F.); +#34433 = EDGE_LOOP('',(#34434,#34442,#34443,#34444,#34445)); +#34434 = ORIENTED_EDGE('',*,*,#34435,.F.); +#34435 = EDGE_CURVE('',#34412,#34436,#34438,.T.); +#34436 = VERTEX_POINT('',#34437); +#34437 = CARTESIAN_POINT('',(9.000000023842,2.27,-2.145767343E-06)); +#34438 = LINE('',#34439,#34440); +#34439 = CARTESIAN_POINT('',(8.150000023842,2.27,-1.94311153833E-06)); +#34440 = VECTOR('',#34441,1.); +#34441 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34442 = ORIENTED_EDGE('',*,*,#34421,.T.); +#34443 = ORIENTED_EDGE('',*,*,#31873,.F.); +#34444 = ORIENTED_EDGE('',*,*,#31865,.T.); +#34445 = ORIENTED_EDGE('',*,*,#34446,.F.); +#34446 = EDGE_CURVE('',#34436,#31858,#34447,.T.); +#34447 = LINE('',#34448,#34449); +#34448 = CARTESIAN_POINT('',(9.000000023842,2.27,-2.14576734264E-06)); +#34449 = VECTOR('',#34450,1.); +#34450 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34451 = PLANE('',#34452); +#34452 = AXIS2_PLACEMENT_3D('',#34453,#34454,#34455); +#34453 = CARTESIAN_POINT('',(8.150000023842,2.27,-1.94311153833E-06)); +#34454 = DIRECTION('',(0.,-1.,0.)); +#34455 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34456 = ADVANCED_FACE('',(#34457),#34489,.T.); +#34457 = FACE_BOUND('',#34458,.T.); +#34458 = EDGE_LOOP('',(#34459,#34460,#34468,#34474,#34475,#34483)); +#34459 = ORIENTED_EDGE('',*,*,#30305,.F.); +#34460 = ORIENTED_EDGE('',*,*,#34461,.F.); +#34461 = EDGE_CURVE('',#34462,#30306,#34464,.T.); +#34462 = VERTEX_POINT('',#34463); +#34463 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#34464 = LINE('',#34465,#34466); +#34465 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#34466 = VECTOR('',#34467,1.); +#34467 = DIRECTION('',(-0.,-0.,-1.)); +#34468 = ORIENTED_EDGE('',*,*,#34469,.F.); +#34469 = EDGE_CURVE('',#32405,#34462,#34470,.T.); +#34470 = LINE('',#34471,#34472); +#34471 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#34472 = VECTOR('',#34473,1.); +#34473 = DIRECTION('',(-0.,-0.,-1.)); +#34474 = ORIENTED_EDGE('',*,*,#32404,.T.); +#34475 = ORIENTED_EDGE('',*,*,#34476,.T.); +#34476 = EDGE_CURVE('',#32397,#34477,#34479,.T.); +#34477 = VERTEX_POINT('',#34478); +#34478 = CARTESIAN_POINT('',(-9.,2.27,0.4)); +#34479 = LINE('',#34480,#34481); +#34480 = CARTESIAN_POINT('',(-9.,2.27,0.8)); +#34481 = VECTOR('',#34482,1.); +#34482 = DIRECTION('',(-0.,-0.,-1.)); +#34483 = ORIENTED_EDGE('',*,*,#34484,.T.); +#34484 = EDGE_CURVE('',#34477,#30298,#34485,.T.); +#34485 = LINE('',#34486,#34487); +#34486 = CARTESIAN_POINT('',(-9.,2.27,0.4)); +#34487 = VECTOR('',#34488,1.); +#34488 = DIRECTION('',(-0.,-0.,-1.)); +#34489 = PLANE('',#34490); +#34490 = AXIS2_PLACEMENT_3D('',#34491,#34492,#34493); +#34491 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34492 = DIRECTION('',(-1.,0.,0.)); +#34493 = DIRECTION('',(0.,1.,0.)); +#34494 = ADVANCED_FACE('',(#34495),#34543,.T.); +#34495 = FACE_BOUND('',#34496,.T.); +#34496 = EDGE_LOOP('',(#34497,#34498,#34506,#34514,#34520,#34521,#34529, + #34537)); +#34497 = ORIENTED_EDGE('',*,*,#31857,.F.); +#34498 = ORIENTED_EDGE('',*,*,#34499,.F.); +#34499 = EDGE_CURVE('',#34500,#31858,#34502,.T.); +#34500 = VERTEX_POINT('',#34501); +#34501 = CARTESIAN_POINT('',(9.,2.27,0.4)); +#34502 = LINE('',#34503,#34504); +#34503 = CARTESIAN_POINT('',(9.,2.27,0.4)); +#34504 = VECTOR('',#34505,1.); +#34505 = DIRECTION('',(0.,0.,-1.)); +#34506 = ORIENTED_EDGE('',*,*,#34507,.F.); +#34507 = EDGE_CURVE('',#34508,#34500,#34510,.T.); +#34508 = VERTEX_POINT('',#34509); +#34509 = CARTESIAN_POINT('',(9.000000214576,2.27,0.799997854233)); +#34510 = LINE('',#34511,#34512); +#34511 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#34512 = VECTOR('',#34513,1.); +#34513 = DIRECTION('',(0.,0.,-1.)); +#34514 = ORIENTED_EDGE('',*,*,#34515,.F.); +#34515 = EDGE_CURVE('',#33445,#34508,#34516,.T.); +#34516 = LINE('',#34517,#34518); +#34517 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#34518 = VECTOR('',#34519,1.); +#34519 = DIRECTION('',(0.,0.,-1.)); +#34520 = ORIENTED_EDGE('',*,*,#33444,.T.); +#34521 = ORIENTED_EDGE('',*,*,#34522,.T.); +#34522 = EDGE_CURVE('',#33437,#34523,#34525,.T.); +#34523 = VERTEX_POINT('',#34524); +#34524 = CARTESIAN_POINT('',(9.000000214576,1.9,0.799997854233)); +#34525 = LINE('',#34526,#34527); +#34526 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#34527 = VECTOR('',#34528,1.); +#34528 = DIRECTION('',(0.,0.,-1.)); +#34529 = ORIENTED_EDGE('',*,*,#34530,.T.); +#34530 = EDGE_CURVE('',#34523,#34531,#34533,.T.); +#34531 = VERTEX_POINT('',#34532); +#34532 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#34533 = LINE('',#34534,#34535); +#34534 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#34535 = VECTOR('',#34536,1.); +#34536 = DIRECTION('',(0.,0.,-1.)); +#34537 = ORIENTED_EDGE('',*,*,#34538,.T.); +#34538 = EDGE_CURVE('',#34531,#31850,#34539,.T.); +#34539 = LINE('',#34540,#34541); +#34540 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#34541 = VECTOR('',#34542,1.); +#34542 = DIRECTION('',(0.,0.,-1.)); +#34543 = PLANE('',#34544); +#34544 = AXIS2_PLACEMENT_3D('',#34545,#34546,#34547); +#34545 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34546 = DIRECTION('',(1.,0.,0.)); +#34547 = DIRECTION('',(0.,-1.,0.)); +#34548 = ADVANCED_FACE('',(#34549),#34579,.F.); +#34549 = FACE_BOUND('',#34550,.T.); +#34550 = EDGE_LOOP('',(#34551,#34562,#34568,#34569,#34570,#34571,#34572, + #34573)); +#34551 = ORIENTED_EDGE('',*,*,#34552,.T.); +#34552 = EDGE_CURVE('',#34553,#34555,#34557,.T.); +#34553 = VERTEX_POINT('',#34554); +#34554 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#34555 = VERTEX_POINT('',#34556); +#34556 = CARTESIAN_POINT('',(-9.,1.725,0.)); +#34557 = CIRCLE('',#34558,0.275); +#34558 = AXIS2_PLACEMENT_3D('',#34559,#34560,#34561); +#34559 = CARTESIAN_POINT('',(-9.,1.45,0.)); +#34560 = DIRECTION('',(0.,0.,1.)); +#34561 = DIRECTION('',(1.,0.,-0.)); +#34562 = ORIENTED_EDGE('',*,*,#34563,.F.); +#34563 = EDGE_CURVE('',#30306,#34555,#34564,.T.); +#34564 = LINE('',#34565,#34566); +#34565 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#34566 = VECTOR('',#34567,1.); +#34567 = DIRECTION('',(0.,-1.,0.)); +#34568 = ORIENTED_EDGE('',*,*,#30313,.T.); +#34569 = ORIENTED_EDGE('',*,*,#30321,.T.); +#34570 = ORIENTED_EDGE('',*,*,#30329,.T.); +#34571 = ORIENTED_EDGE('',*,*,#30337,.F.); +#34572 = ORIENTED_EDGE('',*,*,#30345,.T.); +#34573 = ORIENTED_EDGE('',*,*,#34574,.F.); +#34574 = EDGE_CURVE('',#34553,#30346,#34575,.T.); +#34575 = LINE('',#34576,#34577); +#34576 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#34577 = VECTOR('',#34578,1.); +#34578 = DIRECTION('',(0.,-1.,0.)); +#34579 = PLANE('',#34580); +#34580 = AXIS2_PLACEMENT_3D('',#34581,#34582,#34583); +#34581 = CARTESIAN_POINT('',(-8.571261896074,1.45,0.)); +#34582 = DIRECTION('',(0.,0.,1.)); +#34583 = DIRECTION('',(1.,0.,-0.)); +#34584 = ADVANCED_FACE('',(#34585),#34611,.T.); +#34585 = FACE_BOUND('',#34586,.F.); +#34586 = EDGE_LOOP('',(#34587,#34597,#34603,#34604,#34605)); +#34587 = ORIENTED_EDGE('',*,*,#34588,.F.); +#34588 = EDGE_CURVE('',#34589,#34591,#34593,.T.); +#34589 = VERTEX_POINT('',#34590); +#34590 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.145767343E-06)); +#34591 = VERTEX_POINT('',#34592); +#34592 = CARTESIAN_POINT('',(8.150000023842,1.9,-1.943111538E-06)); +#34593 = LINE('',#34594,#34595); +#34594 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#34595 = VECTOR('',#34596,1.); +#34596 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34597 = ORIENTED_EDGE('',*,*,#34598,.T.); +#34598 = EDGE_CURVE('',#34589,#31850,#34599,.T.); +#34599 = LINE('',#34600,#34601); +#34600 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#34601 = VECTOR('',#34602,1.); +#34602 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34603 = ORIENTED_EDGE('',*,*,#31849,.T.); +#34604 = ORIENTED_EDGE('',*,*,#31841,.T.); +#34605 = ORIENTED_EDGE('',*,*,#34606,.F.); +#34606 = EDGE_CURVE('',#34591,#31834,#34607,.T.); +#34607 = LINE('',#34608,#34609); +#34608 = CARTESIAN_POINT('',(8.150000023842,1.9,-1.94311153833E-06)); +#34609 = VECTOR('',#34610,1.); +#34610 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34611 = PLANE('',#34612); +#34612 = AXIS2_PLACEMENT_3D('',#34613,#34614,#34615); +#34613 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#34614 = DIRECTION('',(0.,1.,0.)); +#34615 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34616 = ADVANCED_FACE('',(#34617),#34635,.T.); +#34617 = FACE_BOUND('',#34618,.F.); +#34618 = EDGE_LOOP('',(#34619,#34627,#34628,#34629)); +#34619 = ORIENTED_EDGE('',*,*,#34620,.F.); +#34620 = EDGE_CURVE('',#34591,#34621,#34623,.T.); +#34621 = VERTEX_POINT('',#34622); +#34622 = CARTESIAN_POINT('',(8.150000023842,1.,-1.943111538E-06)); +#34623 = LINE('',#34624,#34625); +#34624 = CARTESIAN_POINT('',(8.150000023842,1.9,-1.94311153833E-06)); +#34625 = VECTOR('',#34626,1.); +#34626 = DIRECTION('',(0.,-1.,0.)); +#34627 = ORIENTED_EDGE('',*,*,#34606,.T.); +#34628 = ORIENTED_EDGE('',*,*,#31833,.T.); +#34629 = ORIENTED_EDGE('',*,*,#34630,.F.); +#34630 = EDGE_CURVE('',#34621,#31826,#34631,.T.); +#34631 = LINE('',#34632,#34633); +#34632 = CARTESIAN_POINT('',(8.150000023842,1.,-1.94311153833E-06)); +#34633 = VECTOR('',#34634,1.); +#34634 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34635 = PLANE('',#34636); +#34636 = AXIS2_PLACEMENT_3D('',#34637,#34638,#34639); +#34637 = CARTESIAN_POINT('',(8.150000023842,1.9,-1.94311153833E-06)); +#34638 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34639 = DIRECTION('',(0.,1.,0.)); +#34640 = ADVANCED_FACE('',(#34641),#34660,.T.); +#34641 = FACE_BOUND('',#34642,.F.); +#34642 = EDGE_LOOP('',(#34643,#34651,#34652,#34653,#34654)); +#34643 = ORIENTED_EDGE('',*,*,#34644,.F.); +#34644 = EDGE_CURVE('',#34621,#34645,#34647,.T.); +#34645 = VERTEX_POINT('',#34646); +#34646 = CARTESIAN_POINT('',(9.000000023842,1.,-2.145767343E-06)); +#34647 = LINE('',#34648,#34649); +#34648 = CARTESIAN_POINT('',(8.150000023842,1.,-1.94311153833E-06)); +#34649 = VECTOR('',#34650,1.); +#34650 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34651 = ORIENTED_EDGE('',*,*,#34630,.T.); +#34652 = ORIENTED_EDGE('',*,*,#31825,.F.); +#34653 = ORIENTED_EDGE('',*,*,#31817,.T.); +#34654 = ORIENTED_EDGE('',*,*,#34655,.F.); +#34655 = EDGE_CURVE('',#34645,#31810,#34656,.T.); +#34656 = LINE('',#34657,#34658); +#34657 = CARTESIAN_POINT('',(9.000000023842,1.,-2.14576734264E-06)); +#34658 = VECTOR('',#34659,1.); +#34659 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34660 = PLANE('',#34661); +#34661 = AXIS2_PLACEMENT_3D('',#34662,#34663,#34664); +#34662 = CARTESIAN_POINT('',(8.150000023842,1.,-1.94311153833E-06)); +#34663 = DIRECTION('',(0.,-1.,0.)); +#34664 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34665 = ADVANCED_FACE('',(#34666),#34698,.T.); +#34666 = FACE_BOUND('',#34667,.T.); +#34667 = EDGE_LOOP('',(#34668,#34669,#34677,#34683,#34684,#34692)); +#34668 = ORIENTED_EDGE('',*,*,#30353,.F.); +#34669 = ORIENTED_EDGE('',*,*,#34670,.F.); +#34670 = EDGE_CURVE('',#34671,#30354,#34673,.T.); +#34671 = VERTEX_POINT('',#34672); +#34672 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#34673 = LINE('',#34674,#34675); +#34674 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#34675 = VECTOR('',#34676,1.); +#34676 = DIRECTION('',(-0.,-0.,-1.)); +#34677 = ORIENTED_EDGE('',*,*,#34678,.F.); +#34678 = EDGE_CURVE('',#32437,#34671,#34679,.T.); +#34679 = LINE('',#34680,#34681); +#34680 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#34681 = VECTOR('',#34682,1.); +#34682 = DIRECTION('',(-0.,-0.,-1.)); +#34683 = ORIENTED_EDGE('',*,*,#32436,.T.); +#34684 = ORIENTED_EDGE('',*,*,#34685,.T.); +#34685 = EDGE_CURVE('',#32429,#34686,#34688,.T.); +#34686 = VERTEX_POINT('',#34687); +#34687 = CARTESIAN_POINT('',(-9.,1.,0.4)); +#34688 = LINE('',#34689,#34690); +#34689 = CARTESIAN_POINT('',(-9.,1.,0.8)); +#34690 = VECTOR('',#34691,1.); +#34691 = DIRECTION('',(-0.,-0.,-1.)); +#34692 = ORIENTED_EDGE('',*,*,#34693,.T.); +#34693 = EDGE_CURVE('',#34686,#30346,#34694,.T.); +#34694 = LINE('',#34695,#34696); +#34695 = CARTESIAN_POINT('',(-9.,1.,0.4)); +#34696 = VECTOR('',#34697,1.); +#34697 = DIRECTION('',(-0.,-0.,-1.)); +#34698 = PLANE('',#34699); +#34699 = AXIS2_PLACEMENT_3D('',#34700,#34701,#34702); +#34700 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34701 = DIRECTION('',(-1.,0.,0.)); +#34702 = DIRECTION('',(0.,1.,0.)); +#34703 = ADVANCED_FACE('',(#34704),#34752,.T.); +#34704 = FACE_BOUND('',#34705,.T.); +#34705 = EDGE_LOOP('',(#34706,#34707,#34715,#34723,#34729,#34730,#34738, + #34746)); +#34706 = ORIENTED_EDGE('',*,*,#31809,.F.); +#34707 = ORIENTED_EDGE('',*,*,#34708,.F.); +#34708 = EDGE_CURVE('',#34709,#31810,#34711,.T.); +#34709 = VERTEX_POINT('',#34710); +#34710 = CARTESIAN_POINT('',(9.,1.,0.4)); +#34711 = LINE('',#34712,#34713); +#34712 = CARTESIAN_POINT('',(9.,1.,0.4)); +#34713 = VECTOR('',#34714,1.); +#34714 = DIRECTION('',(0.,0.,-1.)); +#34715 = ORIENTED_EDGE('',*,*,#34716,.F.); +#34716 = EDGE_CURVE('',#34717,#34709,#34719,.T.); +#34717 = VERTEX_POINT('',#34718); +#34718 = CARTESIAN_POINT('',(9.000000214576,1.,0.799997854233)); +#34719 = LINE('',#34720,#34721); +#34720 = CARTESIAN_POINT('',(9.,1.,0.8)); +#34721 = VECTOR('',#34722,1.); +#34722 = DIRECTION('',(0.,0.,-1.)); +#34723 = ORIENTED_EDGE('',*,*,#34724,.F.); +#34724 = EDGE_CURVE('',#33413,#34717,#34725,.T.); +#34725 = LINE('',#34726,#34727); +#34726 = CARTESIAN_POINT('',(9.,1.,0.8)); +#34727 = VECTOR('',#34728,1.); +#34728 = DIRECTION('',(0.,0.,-1.)); +#34729 = ORIENTED_EDGE('',*,*,#33412,.T.); +#34730 = ORIENTED_EDGE('',*,*,#34731,.T.); +#34731 = EDGE_CURVE('',#33405,#34732,#34734,.T.); +#34732 = VERTEX_POINT('',#34733); +#34733 = CARTESIAN_POINT('',(9.000000214576,0.63,0.799997854233)); +#34734 = LINE('',#34735,#34736); +#34735 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#34736 = VECTOR('',#34737,1.); +#34737 = DIRECTION('',(0.,0.,-1.)); +#34738 = ORIENTED_EDGE('',*,*,#34739,.T.); +#34739 = EDGE_CURVE('',#34732,#34740,#34742,.T.); +#34740 = VERTEX_POINT('',#34741); +#34741 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#34742 = LINE('',#34743,#34744); +#34743 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#34744 = VECTOR('',#34745,1.); +#34745 = DIRECTION('',(0.,0.,-1.)); +#34746 = ORIENTED_EDGE('',*,*,#34747,.T.); +#34747 = EDGE_CURVE('',#34740,#31802,#34748,.T.); +#34748 = LINE('',#34749,#34750); +#34749 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#34750 = VECTOR('',#34751,1.); +#34751 = DIRECTION('',(0.,0.,-1.)); +#34752 = PLANE('',#34753); +#34753 = AXIS2_PLACEMENT_3D('',#34754,#34755,#34756); +#34754 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34755 = DIRECTION('',(1.,0.,0.)); +#34756 = DIRECTION('',(0.,-1.,0.)); +#34757 = ADVANCED_FACE('',(#34758),#34788,.F.); +#34758 = FACE_BOUND('',#34759,.T.); +#34759 = EDGE_LOOP('',(#34760,#34771,#34777,#34778,#34779,#34780,#34781, + #34782)); +#34760 = ORIENTED_EDGE('',*,*,#34761,.T.); +#34761 = EDGE_CURVE('',#34762,#34764,#34766,.T.); +#34762 = VERTEX_POINT('',#34763); +#34763 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#34764 = VERTEX_POINT('',#34765); +#34765 = CARTESIAN_POINT('',(-9.,0.455,0.)); +#34766 = CIRCLE('',#34767,0.275); +#34767 = AXIS2_PLACEMENT_3D('',#34768,#34769,#34770); +#34768 = CARTESIAN_POINT('',(-9.,0.18,0.)); +#34769 = DIRECTION('',(0.,0.,1.)); +#34770 = DIRECTION('',(1.,0.,-0.)); +#34771 = ORIENTED_EDGE('',*,*,#34772,.F.); +#34772 = EDGE_CURVE('',#30354,#34764,#34773,.T.); +#34773 = LINE('',#34774,#34775); +#34774 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#34775 = VECTOR('',#34776,1.); +#34776 = DIRECTION('',(0.,-1.,0.)); +#34777 = ORIENTED_EDGE('',*,*,#30361,.T.); +#34778 = ORIENTED_EDGE('',*,*,#30369,.T.); +#34779 = ORIENTED_EDGE('',*,*,#30377,.T.); +#34780 = ORIENTED_EDGE('',*,*,#30385,.F.); +#34781 = ORIENTED_EDGE('',*,*,#30393,.T.); +#34782 = ORIENTED_EDGE('',*,*,#34783,.F.); +#34783 = EDGE_CURVE('',#34762,#30394,#34784,.T.); +#34784 = LINE('',#34785,#34786); +#34785 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#34786 = VECTOR('',#34787,1.); +#34787 = DIRECTION('',(0.,-1.,0.)); +#34788 = PLANE('',#34789); +#34789 = AXIS2_PLACEMENT_3D('',#34790,#34791,#34792); +#34790 = CARTESIAN_POINT('',(-8.571261896074,0.18,0.)); +#34791 = DIRECTION('',(0.,0.,1.)); +#34792 = DIRECTION('',(1.,0.,-0.)); +#34793 = ADVANCED_FACE('',(#34794),#34820,.T.); +#34794 = FACE_BOUND('',#34795,.F.); +#34795 = EDGE_LOOP('',(#34796,#34806,#34812,#34813,#34814)); +#34796 = ORIENTED_EDGE('',*,*,#34797,.F.); +#34797 = EDGE_CURVE('',#34798,#34800,#34802,.T.); +#34798 = VERTEX_POINT('',#34799); +#34799 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.145767343E-06)); +#34800 = VERTEX_POINT('',#34801); +#34801 = CARTESIAN_POINT('',(8.150000023842,0.63,-1.943111538E-06)); +#34802 = LINE('',#34803,#34804); +#34803 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#34804 = VECTOR('',#34805,1.); +#34805 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34806 = ORIENTED_EDGE('',*,*,#34807,.T.); +#34807 = EDGE_CURVE('',#34798,#31802,#34808,.T.); +#34808 = LINE('',#34809,#34810); +#34809 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#34810 = VECTOR('',#34811,1.); +#34811 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34812 = ORIENTED_EDGE('',*,*,#31801,.T.); +#34813 = ORIENTED_EDGE('',*,*,#31793,.T.); +#34814 = ORIENTED_EDGE('',*,*,#34815,.F.); +#34815 = EDGE_CURVE('',#34800,#31786,#34816,.T.); +#34816 = LINE('',#34817,#34818); +#34817 = CARTESIAN_POINT('',(8.150000023842,0.63,-1.94311153833E-06)); +#34818 = VECTOR('',#34819,1.); +#34819 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34820 = PLANE('',#34821); +#34821 = AXIS2_PLACEMENT_3D('',#34822,#34823,#34824); +#34822 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#34823 = DIRECTION('',(0.,1.,0.)); +#34824 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34825 = ADVANCED_FACE('',(#34826),#34844,.T.); +#34826 = FACE_BOUND('',#34827,.F.); +#34827 = EDGE_LOOP('',(#34828,#34836,#34837,#34838)); +#34828 = ORIENTED_EDGE('',*,*,#34829,.F.); +#34829 = EDGE_CURVE('',#34800,#34830,#34832,.T.); +#34830 = VERTEX_POINT('',#34831); +#34831 = CARTESIAN_POINT('',(8.150000023842,-0.27,-1.943111538E-06)); +#34832 = LINE('',#34833,#34834); +#34833 = CARTESIAN_POINT('',(8.150000023842,0.63,-1.94311153833E-06)); +#34834 = VECTOR('',#34835,1.); +#34835 = DIRECTION('',(0.,-1.,0.)); +#34836 = ORIENTED_EDGE('',*,*,#34815,.T.); +#34837 = ORIENTED_EDGE('',*,*,#31785,.T.); +#34838 = ORIENTED_EDGE('',*,*,#34839,.F.); +#34839 = EDGE_CURVE('',#34830,#31778,#34840,.T.); +#34840 = LINE('',#34841,#34842); +#34841 = CARTESIAN_POINT('',(8.150000023842,-0.27,-1.94311153833E-06)); +#34842 = VECTOR('',#34843,1.); +#34843 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34844 = PLANE('',#34845); +#34845 = AXIS2_PLACEMENT_3D('',#34846,#34847,#34848); +#34846 = CARTESIAN_POINT('',(8.150000023842,0.63,-1.94311153833E-06)); +#34847 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34848 = DIRECTION('',(0.,1.,0.)); +#34849 = ADVANCED_FACE('',(#34850),#34869,.T.); +#34850 = FACE_BOUND('',#34851,.F.); +#34851 = EDGE_LOOP('',(#34852,#34860,#34861,#34862,#34863)); +#34852 = ORIENTED_EDGE('',*,*,#34853,.F.); +#34853 = EDGE_CURVE('',#34830,#34854,#34856,.T.); +#34854 = VERTEX_POINT('',#34855); +#34855 = CARTESIAN_POINT('',(9.000000023842,-0.27,-2.145767343E-06)); +#34856 = LINE('',#34857,#34858); +#34857 = CARTESIAN_POINT('',(8.150000023842,-0.27,-1.94311153833E-06)); +#34858 = VECTOR('',#34859,1.); +#34859 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#34860 = ORIENTED_EDGE('',*,*,#34839,.T.); +#34861 = ORIENTED_EDGE('',*,*,#31777,.F.); +#34862 = ORIENTED_EDGE('',*,*,#31769,.T.); +#34863 = ORIENTED_EDGE('',*,*,#34864,.F.); +#34864 = EDGE_CURVE('',#34854,#31762,#34865,.T.); +#34865 = LINE('',#34866,#34867); +#34866 = CARTESIAN_POINT('',(9.000000023842,-0.27,-2.14576734264E-06)); +#34867 = VECTOR('',#34868,1.); +#34868 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#34869 = PLANE('',#34870); +#34870 = AXIS2_PLACEMENT_3D('',#34871,#34872,#34873); +#34871 = CARTESIAN_POINT('',(8.150000023842,-0.27,-1.94311153833E-06)); +#34872 = DIRECTION('',(0.,-1.,0.)); +#34873 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#34874 = ADVANCED_FACE('',(#34875),#34907,.T.); +#34875 = FACE_BOUND('',#34876,.T.); +#34876 = EDGE_LOOP('',(#34877,#34878,#34886,#34892,#34893,#34901)); +#34877 = ORIENTED_EDGE('',*,*,#30401,.F.); +#34878 = ORIENTED_EDGE('',*,*,#34879,.F.); +#34879 = EDGE_CURVE('',#34880,#30402,#34882,.T.); +#34880 = VERTEX_POINT('',#34881); +#34881 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#34882 = LINE('',#34883,#34884); +#34883 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#34884 = VECTOR('',#34885,1.); +#34885 = DIRECTION('',(-0.,-0.,-1.)); +#34886 = ORIENTED_EDGE('',*,*,#34887,.F.); +#34887 = EDGE_CURVE('',#32469,#34880,#34888,.T.); +#34888 = LINE('',#34889,#34890); +#34889 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#34890 = VECTOR('',#34891,1.); +#34891 = DIRECTION('',(-0.,-0.,-1.)); +#34892 = ORIENTED_EDGE('',*,*,#32468,.T.); +#34893 = ORIENTED_EDGE('',*,*,#34894,.T.); +#34894 = EDGE_CURVE('',#32461,#34895,#34897,.T.); +#34895 = VERTEX_POINT('',#34896); +#34896 = CARTESIAN_POINT('',(-9.,-0.27,0.4)); +#34897 = LINE('',#34898,#34899); +#34898 = CARTESIAN_POINT('',(-9.,-0.27,0.8)); +#34899 = VECTOR('',#34900,1.); +#34900 = DIRECTION('',(-0.,-0.,-1.)); +#34901 = ORIENTED_EDGE('',*,*,#34902,.T.); +#34902 = EDGE_CURVE('',#34895,#30394,#34903,.T.); +#34903 = LINE('',#34904,#34905); +#34904 = CARTESIAN_POINT('',(-9.,-0.27,0.4)); +#34905 = VECTOR('',#34906,1.); +#34906 = DIRECTION('',(-0.,-0.,-1.)); +#34907 = PLANE('',#34908); +#34908 = AXIS2_PLACEMENT_3D('',#34909,#34910,#34911); +#34909 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34910 = DIRECTION('',(-1.,0.,0.)); +#34911 = DIRECTION('',(0.,1.,0.)); +#34912 = ADVANCED_FACE('',(#34913),#34961,.T.); +#34913 = FACE_BOUND('',#34914,.T.); +#34914 = EDGE_LOOP('',(#34915,#34916,#34924,#34932,#34938,#34939,#34947, + #34955)); +#34915 = ORIENTED_EDGE('',*,*,#31761,.F.); +#34916 = ORIENTED_EDGE('',*,*,#34917,.F.); +#34917 = EDGE_CURVE('',#34918,#31762,#34920,.T.); +#34918 = VERTEX_POINT('',#34919); +#34919 = CARTESIAN_POINT('',(9.,-0.27,0.4)); +#34920 = LINE('',#34921,#34922); +#34921 = CARTESIAN_POINT('',(9.,-0.27,0.4)); +#34922 = VECTOR('',#34923,1.); +#34923 = DIRECTION('',(0.,0.,-1.)); +#34924 = ORIENTED_EDGE('',*,*,#34925,.F.); +#34925 = EDGE_CURVE('',#34926,#34918,#34928,.T.); +#34926 = VERTEX_POINT('',#34927); +#34927 = CARTESIAN_POINT('',(9.000000214576,-0.27,0.799997854233)); +#34928 = LINE('',#34929,#34930); +#34929 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#34930 = VECTOR('',#34931,1.); +#34931 = DIRECTION('',(0.,0.,-1.)); +#34932 = ORIENTED_EDGE('',*,*,#34933,.F.); +#34933 = EDGE_CURVE('',#33381,#34926,#34934,.T.); +#34934 = LINE('',#34935,#34936); +#34935 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#34936 = VECTOR('',#34937,1.); +#34937 = DIRECTION('',(0.,0.,-1.)); +#34938 = ORIENTED_EDGE('',*,*,#33380,.T.); +#34939 = ORIENTED_EDGE('',*,*,#34940,.T.); +#34940 = EDGE_CURVE('',#33373,#34941,#34943,.T.); +#34941 = VERTEX_POINT('',#34942); +#34942 = CARTESIAN_POINT('',(9.000000214576,-0.64,0.799997854233)); +#34943 = LINE('',#34944,#34945); +#34944 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#34945 = VECTOR('',#34946,1.); +#34946 = DIRECTION('',(0.,0.,-1.)); +#34947 = ORIENTED_EDGE('',*,*,#34948,.T.); +#34948 = EDGE_CURVE('',#34941,#34949,#34951,.T.); +#34949 = VERTEX_POINT('',#34950); +#34950 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#34951 = LINE('',#34952,#34953); +#34952 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#34953 = VECTOR('',#34954,1.); +#34954 = DIRECTION('',(0.,0.,-1.)); +#34955 = ORIENTED_EDGE('',*,*,#34956,.T.); +#34956 = EDGE_CURVE('',#34949,#31754,#34957,.T.); +#34957 = LINE('',#34958,#34959); +#34958 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#34959 = VECTOR('',#34960,1.); +#34960 = DIRECTION('',(0.,0.,-1.)); +#34961 = PLANE('',#34962); +#34962 = AXIS2_PLACEMENT_3D('',#34963,#34964,#34965); +#34963 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34964 = DIRECTION('',(1.,0.,0.)); +#34965 = DIRECTION('',(0.,-1.,0.)); +#34966 = ADVANCED_FACE('',(#34967),#34997,.F.); +#34967 = FACE_BOUND('',#34968,.T.); +#34968 = EDGE_LOOP('',(#34969,#34980,#34986,#34987,#34988,#34989,#34990, + #34991)); +#34969 = ORIENTED_EDGE('',*,*,#34970,.T.); +#34970 = EDGE_CURVE('',#34971,#34973,#34975,.T.); +#34971 = VERTEX_POINT('',#34972); +#34972 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#34973 = VERTEX_POINT('',#34974); +#34974 = CARTESIAN_POINT('',(-9.,-0.815,0.)); +#34975 = CIRCLE('',#34976,0.275); +#34976 = AXIS2_PLACEMENT_3D('',#34977,#34978,#34979); +#34977 = CARTESIAN_POINT('',(-9.,-1.09,0.)); +#34978 = DIRECTION('',(0.,0.,1.)); +#34979 = DIRECTION('',(1.,0.,-0.)); +#34980 = ORIENTED_EDGE('',*,*,#34981,.F.); +#34981 = EDGE_CURVE('',#30402,#34973,#34982,.T.); +#34982 = LINE('',#34983,#34984); +#34983 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#34984 = VECTOR('',#34985,1.); +#34985 = DIRECTION('',(0.,-1.,0.)); +#34986 = ORIENTED_EDGE('',*,*,#30409,.T.); +#34987 = ORIENTED_EDGE('',*,*,#30417,.T.); +#34988 = ORIENTED_EDGE('',*,*,#30425,.T.); +#34989 = ORIENTED_EDGE('',*,*,#30433,.F.); +#34990 = ORIENTED_EDGE('',*,*,#30441,.T.); +#34991 = ORIENTED_EDGE('',*,*,#34992,.F.); +#34992 = EDGE_CURVE('',#34971,#30442,#34993,.T.); +#34993 = LINE('',#34994,#34995); +#34994 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#34995 = VECTOR('',#34996,1.); +#34996 = DIRECTION('',(0.,-1.,0.)); +#34997 = PLANE('',#34998); +#34998 = AXIS2_PLACEMENT_3D('',#34999,#35000,#35001); +#34999 = CARTESIAN_POINT('',(-8.571261896074,-1.09,0.)); +#35000 = DIRECTION('',(0.,0.,1.)); +#35001 = DIRECTION('',(1.,0.,-0.)); +#35002 = ADVANCED_FACE('',(#35003),#35029,.T.); +#35003 = FACE_BOUND('',#35004,.F.); +#35004 = EDGE_LOOP('',(#35005,#35015,#35021,#35022,#35023)); +#35005 = ORIENTED_EDGE('',*,*,#35006,.F.); +#35006 = EDGE_CURVE('',#35007,#35009,#35011,.T.); +#35007 = VERTEX_POINT('',#35008); +#35008 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.145767343E-06)); +#35009 = VERTEX_POINT('',#35010); +#35010 = CARTESIAN_POINT('',(8.150000023842,-0.64,-1.943111538E-06)); +#35011 = LINE('',#35012,#35013); +#35012 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#35013 = VECTOR('',#35014,1.); +#35014 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35015 = ORIENTED_EDGE('',*,*,#35016,.T.); +#35016 = EDGE_CURVE('',#35007,#31754,#35017,.T.); +#35017 = LINE('',#35018,#35019); +#35018 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#35019 = VECTOR('',#35020,1.); +#35020 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35021 = ORIENTED_EDGE('',*,*,#31753,.T.); +#35022 = ORIENTED_EDGE('',*,*,#31745,.T.); +#35023 = ORIENTED_EDGE('',*,*,#35024,.F.); +#35024 = EDGE_CURVE('',#35009,#31738,#35025,.T.); +#35025 = LINE('',#35026,#35027); +#35026 = CARTESIAN_POINT('',(8.150000023842,-0.64,-1.94311153833E-06)); +#35027 = VECTOR('',#35028,1.); +#35028 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35029 = PLANE('',#35030); +#35030 = AXIS2_PLACEMENT_3D('',#35031,#35032,#35033); +#35031 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#35032 = DIRECTION('',(0.,1.,0.)); +#35033 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35034 = ADVANCED_FACE('',(#35035),#35053,.T.); +#35035 = FACE_BOUND('',#35036,.F.); +#35036 = EDGE_LOOP('',(#35037,#35045,#35046,#35047)); +#35037 = ORIENTED_EDGE('',*,*,#35038,.F.); +#35038 = EDGE_CURVE('',#35009,#35039,#35041,.T.); +#35039 = VERTEX_POINT('',#35040); +#35040 = CARTESIAN_POINT('',(8.150000023842,-1.54,-1.943111538E-06)); +#35041 = LINE('',#35042,#35043); +#35042 = CARTESIAN_POINT('',(8.150000023842,-0.64,-1.94311153833E-06)); +#35043 = VECTOR('',#35044,1.); +#35044 = DIRECTION('',(0.,-1.,0.)); +#35045 = ORIENTED_EDGE('',*,*,#35024,.T.); +#35046 = ORIENTED_EDGE('',*,*,#31737,.T.); +#35047 = ORIENTED_EDGE('',*,*,#35048,.F.); +#35048 = EDGE_CURVE('',#35039,#31730,#35049,.T.); +#35049 = LINE('',#35050,#35051); +#35050 = CARTESIAN_POINT('',(8.150000023842,-1.54,-1.94311153833E-06)); +#35051 = VECTOR('',#35052,1.); +#35052 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35053 = PLANE('',#35054); +#35054 = AXIS2_PLACEMENT_3D('',#35055,#35056,#35057); +#35055 = CARTESIAN_POINT('',(8.150000023842,-0.64,-1.94311153833E-06)); +#35056 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35057 = DIRECTION('',(0.,1.,0.)); +#35058 = ADVANCED_FACE('',(#35059),#35078,.T.); +#35059 = FACE_BOUND('',#35060,.F.); +#35060 = EDGE_LOOP('',(#35061,#35069,#35070,#35071,#35072)); +#35061 = ORIENTED_EDGE('',*,*,#35062,.F.); +#35062 = EDGE_CURVE('',#35039,#35063,#35065,.T.); +#35063 = VERTEX_POINT('',#35064); +#35064 = CARTESIAN_POINT('',(9.000000023842,-1.54,-2.145767343E-06)); +#35065 = LINE('',#35066,#35067); +#35066 = CARTESIAN_POINT('',(8.150000023842,-1.54,-1.94311153833E-06)); +#35067 = VECTOR('',#35068,1.); +#35068 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35069 = ORIENTED_EDGE('',*,*,#35048,.T.); +#35070 = ORIENTED_EDGE('',*,*,#31729,.F.); +#35071 = ORIENTED_EDGE('',*,*,#31721,.T.); +#35072 = ORIENTED_EDGE('',*,*,#35073,.F.); +#35073 = EDGE_CURVE('',#35063,#31714,#35074,.T.); +#35074 = LINE('',#35075,#35076); +#35075 = CARTESIAN_POINT('',(9.000000023842,-1.54,-2.14576734264E-06)); +#35076 = VECTOR('',#35077,1.); +#35077 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35078 = PLANE('',#35079); +#35079 = AXIS2_PLACEMENT_3D('',#35080,#35081,#35082); +#35080 = CARTESIAN_POINT('',(8.150000023842,-1.54,-1.94311153833E-06)); +#35081 = DIRECTION('',(0.,-1.,0.)); +#35082 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35083 = ADVANCED_FACE('',(#35084),#35116,.T.); +#35084 = FACE_BOUND('',#35085,.T.); +#35085 = EDGE_LOOP('',(#35086,#35087,#35095,#35101,#35102,#35110)); +#35086 = ORIENTED_EDGE('',*,*,#30449,.F.); +#35087 = ORIENTED_EDGE('',*,*,#35088,.F.); +#35088 = EDGE_CURVE('',#35089,#30450,#35091,.T.); +#35089 = VERTEX_POINT('',#35090); +#35090 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#35091 = LINE('',#35092,#35093); +#35092 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#35093 = VECTOR('',#35094,1.); +#35094 = DIRECTION('',(-0.,-0.,-1.)); +#35095 = ORIENTED_EDGE('',*,*,#35096,.F.); +#35096 = EDGE_CURVE('',#32501,#35089,#35097,.T.); +#35097 = LINE('',#35098,#35099); +#35098 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#35099 = VECTOR('',#35100,1.); +#35100 = DIRECTION('',(-0.,-0.,-1.)); +#35101 = ORIENTED_EDGE('',*,*,#32500,.T.); +#35102 = ORIENTED_EDGE('',*,*,#35103,.T.); +#35103 = EDGE_CURVE('',#32493,#35104,#35106,.T.); +#35104 = VERTEX_POINT('',#35105); +#35105 = CARTESIAN_POINT('',(-9.,-1.54,0.4)); +#35106 = LINE('',#35107,#35108); +#35107 = CARTESIAN_POINT('',(-9.,-1.54,0.8)); +#35108 = VECTOR('',#35109,1.); +#35109 = DIRECTION('',(-0.,-0.,-1.)); +#35110 = ORIENTED_EDGE('',*,*,#35111,.T.); +#35111 = EDGE_CURVE('',#35104,#30442,#35112,.T.); +#35112 = LINE('',#35113,#35114); +#35113 = CARTESIAN_POINT('',(-9.,-1.54,0.4)); +#35114 = VECTOR('',#35115,1.); +#35115 = DIRECTION('',(-0.,-0.,-1.)); +#35116 = PLANE('',#35117); +#35117 = AXIS2_PLACEMENT_3D('',#35118,#35119,#35120); +#35118 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35119 = DIRECTION('',(-1.,0.,0.)); +#35120 = DIRECTION('',(0.,1.,0.)); +#35121 = ADVANCED_FACE('',(#35122),#35170,.T.); +#35122 = FACE_BOUND('',#35123,.T.); +#35123 = EDGE_LOOP('',(#35124,#35125,#35133,#35141,#35147,#35148,#35156, + #35164)); +#35124 = ORIENTED_EDGE('',*,*,#31713,.F.); +#35125 = ORIENTED_EDGE('',*,*,#35126,.F.); +#35126 = EDGE_CURVE('',#35127,#31714,#35129,.T.); +#35127 = VERTEX_POINT('',#35128); +#35128 = CARTESIAN_POINT('',(9.,-1.54,0.4)); +#35129 = LINE('',#35130,#35131); +#35130 = CARTESIAN_POINT('',(9.,-1.54,0.4)); +#35131 = VECTOR('',#35132,1.); +#35132 = DIRECTION('',(0.,0.,-1.)); +#35133 = ORIENTED_EDGE('',*,*,#35134,.F.); +#35134 = EDGE_CURVE('',#35135,#35127,#35137,.T.); +#35135 = VERTEX_POINT('',#35136); +#35136 = CARTESIAN_POINT('',(9.000000214576,-1.54,0.799997854233)); +#35137 = LINE('',#35138,#35139); +#35138 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#35139 = VECTOR('',#35140,1.); +#35140 = DIRECTION('',(0.,0.,-1.)); +#35141 = ORIENTED_EDGE('',*,*,#35142,.F.); +#35142 = EDGE_CURVE('',#33349,#35135,#35143,.T.); +#35143 = LINE('',#35144,#35145); +#35144 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#35145 = VECTOR('',#35146,1.); +#35146 = DIRECTION('',(0.,0.,-1.)); +#35147 = ORIENTED_EDGE('',*,*,#33348,.T.); +#35148 = ORIENTED_EDGE('',*,*,#35149,.T.); +#35149 = EDGE_CURVE('',#33341,#35150,#35152,.T.); +#35150 = VERTEX_POINT('',#35151); +#35151 = CARTESIAN_POINT('',(9.000000214576,-1.91,0.799997854233)); +#35152 = LINE('',#35153,#35154); +#35153 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#35154 = VECTOR('',#35155,1.); +#35155 = DIRECTION('',(0.,0.,-1.)); +#35156 = ORIENTED_EDGE('',*,*,#35157,.T.); +#35157 = EDGE_CURVE('',#35150,#35158,#35160,.T.); +#35158 = VERTEX_POINT('',#35159); +#35159 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#35160 = LINE('',#35161,#35162); +#35161 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#35162 = VECTOR('',#35163,1.); +#35163 = DIRECTION('',(0.,0.,-1.)); +#35164 = ORIENTED_EDGE('',*,*,#35165,.T.); +#35165 = EDGE_CURVE('',#35158,#31706,#35166,.T.); +#35166 = LINE('',#35167,#35168); +#35167 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#35168 = VECTOR('',#35169,1.); +#35169 = DIRECTION('',(0.,0.,-1.)); +#35170 = PLANE('',#35171); +#35171 = AXIS2_PLACEMENT_3D('',#35172,#35173,#35174); +#35172 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35173 = DIRECTION('',(1.,0.,0.)); +#35174 = DIRECTION('',(0.,-1.,0.)); +#35175 = ADVANCED_FACE('',(#35176),#35206,.F.); +#35176 = FACE_BOUND('',#35177,.T.); +#35177 = EDGE_LOOP('',(#35178,#35189,#35195,#35196,#35197,#35198,#35199, + #35200)); +#35178 = ORIENTED_EDGE('',*,*,#35179,.T.); +#35179 = EDGE_CURVE('',#35180,#35182,#35184,.T.); +#35180 = VERTEX_POINT('',#35181); +#35181 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#35182 = VERTEX_POINT('',#35183); +#35183 = CARTESIAN_POINT('',(-9.,-2.085,0.)); +#35184 = CIRCLE('',#35185,0.275); +#35185 = AXIS2_PLACEMENT_3D('',#35186,#35187,#35188); +#35186 = CARTESIAN_POINT('',(-9.,-2.36,0.)); +#35187 = DIRECTION('',(0.,0.,1.)); +#35188 = DIRECTION('',(1.,0.,-0.)); +#35189 = ORIENTED_EDGE('',*,*,#35190,.F.); +#35190 = EDGE_CURVE('',#30450,#35182,#35191,.T.); +#35191 = LINE('',#35192,#35193); +#35192 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#35193 = VECTOR('',#35194,1.); +#35194 = DIRECTION('',(0.,-1.,0.)); +#35195 = ORIENTED_EDGE('',*,*,#30457,.T.); +#35196 = ORIENTED_EDGE('',*,*,#30465,.T.); +#35197 = ORIENTED_EDGE('',*,*,#30473,.T.); +#35198 = ORIENTED_EDGE('',*,*,#30481,.F.); +#35199 = ORIENTED_EDGE('',*,*,#30489,.T.); +#35200 = ORIENTED_EDGE('',*,*,#35201,.F.); +#35201 = EDGE_CURVE('',#35180,#30490,#35202,.T.); +#35202 = LINE('',#35203,#35204); +#35203 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#35204 = VECTOR('',#35205,1.); +#35205 = DIRECTION('',(0.,-1.,0.)); +#35206 = PLANE('',#35207); +#35207 = AXIS2_PLACEMENT_3D('',#35208,#35209,#35210); +#35208 = CARTESIAN_POINT('',(-8.571261896074,-2.36,0.)); +#35209 = DIRECTION('',(0.,0.,1.)); +#35210 = DIRECTION('',(1.,0.,-0.)); +#35211 = ADVANCED_FACE('',(#35212),#35238,.T.); +#35212 = FACE_BOUND('',#35213,.F.); +#35213 = EDGE_LOOP('',(#35214,#35224,#35230,#35231,#35232)); +#35214 = ORIENTED_EDGE('',*,*,#35215,.F.); +#35215 = EDGE_CURVE('',#35216,#35218,#35220,.T.); +#35216 = VERTEX_POINT('',#35217); +#35217 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.145767343E-06)); +#35218 = VERTEX_POINT('',#35219); +#35219 = CARTESIAN_POINT('',(8.150000023842,-1.91,-1.943111538E-06)); +#35220 = LINE('',#35221,#35222); +#35221 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#35222 = VECTOR('',#35223,1.); +#35223 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35224 = ORIENTED_EDGE('',*,*,#35225,.T.); +#35225 = EDGE_CURVE('',#35216,#31706,#35226,.T.); +#35226 = LINE('',#35227,#35228); +#35227 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#35228 = VECTOR('',#35229,1.); +#35229 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35230 = ORIENTED_EDGE('',*,*,#31705,.T.); +#35231 = ORIENTED_EDGE('',*,*,#31697,.T.); +#35232 = ORIENTED_EDGE('',*,*,#35233,.F.); +#35233 = EDGE_CURVE('',#35218,#31690,#35234,.T.); +#35234 = LINE('',#35235,#35236); +#35235 = CARTESIAN_POINT('',(8.150000023842,-1.91,-1.94311153833E-06)); +#35236 = VECTOR('',#35237,1.); +#35237 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35238 = PLANE('',#35239); +#35239 = AXIS2_PLACEMENT_3D('',#35240,#35241,#35242); +#35240 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#35241 = DIRECTION('',(0.,1.,0.)); +#35242 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35243 = ADVANCED_FACE('',(#35244),#35262,.T.); +#35244 = FACE_BOUND('',#35245,.F.); +#35245 = EDGE_LOOP('',(#35246,#35254,#35255,#35256)); +#35246 = ORIENTED_EDGE('',*,*,#35247,.F.); +#35247 = EDGE_CURVE('',#35218,#35248,#35250,.T.); +#35248 = VERTEX_POINT('',#35249); +#35249 = CARTESIAN_POINT('',(8.150000023842,-2.81,-1.943111538E-06)); +#35250 = LINE('',#35251,#35252); +#35251 = CARTESIAN_POINT('',(8.150000023842,-1.91,-1.94311153833E-06)); +#35252 = VECTOR('',#35253,1.); +#35253 = DIRECTION('',(0.,-1.,0.)); +#35254 = ORIENTED_EDGE('',*,*,#35233,.T.); +#35255 = ORIENTED_EDGE('',*,*,#31689,.T.); +#35256 = ORIENTED_EDGE('',*,*,#35257,.F.); +#35257 = EDGE_CURVE('',#35248,#31682,#35258,.T.); +#35258 = LINE('',#35259,#35260); +#35259 = CARTESIAN_POINT('',(8.150000023842,-2.81,-1.94311153833E-06)); +#35260 = VECTOR('',#35261,1.); +#35261 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35262 = PLANE('',#35263); +#35263 = AXIS2_PLACEMENT_3D('',#35264,#35265,#35266); +#35264 = CARTESIAN_POINT('',(8.150000023842,-1.91,-1.94311153833E-06)); +#35265 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35266 = DIRECTION('',(0.,1.,0.)); +#35267 = ADVANCED_FACE('',(#35268),#35287,.T.); +#35268 = FACE_BOUND('',#35269,.F.); +#35269 = EDGE_LOOP('',(#35270,#35278,#35279,#35280,#35281)); +#35270 = ORIENTED_EDGE('',*,*,#35271,.F.); +#35271 = EDGE_CURVE('',#35248,#35272,#35274,.T.); +#35272 = VERTEX_POINT('',#35273); +#35273 = CARTESIAN_POINT('',(9.000000023842,-2.81,-2.145767343E-06)); +#35274 = LINE('',#35275,#35276); +#35275 = CARTESIAN_POINT('',(8.150000023842,-2.81,-1.94311153833E-06)); +#35276 = VECTOR('',#35277,1.); +#35277 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35278 = ORIENTED_EDGE('',*,*,#35257,.T.); +#35279 = ORIENTED_EDGE('',*,*,#31681,.F.); +#35280 = ORIENTED_EDGE('',*,*,#31673,.T.); +#35281 = ORIENTED_EDGE('',*,*,#35282,.F.); +#35282 = EDGE_CURVE('',#35272,#31666,#35283,.T.); +#35283 = LINE('',#35284,#35285); +#35284 = CARTESIAN_POINT('',(9.000000023842,-2.81,-2.14576734264E-06)); +#35285 = VECTOR('',#35286,1.); +#35286 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35287 = PLANE('',#35288); +#35288 = AXIS2_PLACEMENT_3D('',#35289,#35290,#35291); +#35289 = CARTESIAN_POINT('',(8.150000023842,-2.81,-1.94311153833E-06)); +#35290 = DIRECTION('',(0.,-1.,0.)); +#35291 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35292 = ADVANCED_FACE('',(#35293),#35325,.T.); +#35293 = FACE_BOUND('',#35294,.T.); +#35294 = EDGE_LOOP('',(#35295,#35296,#35304,#35310,#35311,#35319)); +#35295 = ORIENTED_EDGE('',*,*,#30497,.F.); +#35296 = ORIENTED_EDGE('',*,*,#35297,.F.); +#35297 = EDGE_CURVE('',#35298,#30498,#35300,.T.); +#35298 = VERTEX_POINT('',#35299); +#35299 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#35300 = LINE('',#35301,#35302); +#35301 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#35302 = VECTOR('',#35303,1.); +#35303 = DIRECTION('',(-0.,-0.,-1.)); +#35304 = ORIENTED_EDGE('',*,*,#35305,.F.); +#35305 = EDGE_CURVE('',#32533,#35298,#35306,.T.); +#35306 = LINE('',#35307,#35308); +#35307 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#35308 = VECTOR('',#35309,1.); +#35309 = DIRECTION('',(-0.,-0.,-1.)); +#35310 = ORIENTED_EDGE('',*,*,#32532,.T.); +#35311 = ORIENTED_EDGE('',*,*,#35312,.T.); +#35312 = EDGE_CURVE('',#32525,#35313,#35315,.T.); +#35313 = VERTEX_POINT('',#35314); +#35314 = CARTESIAN_POINT('',(-9.,-2.81,0.4)); +#35315 = LINE('',#35316,#35317); +#35316 = CARTESIAN_POINT('',(-9.,-2.81,0.8)); +#35317 = VECTOR('',#35318,1.); +#35318 = DIRECTION('',(-0.,-0.,-1.)); +#35319 = ORIENTED_EDGE('',*,*,#35320,.T.); +#35320 = EDGE_CURVE('',#35313,#30490,#35321,.T.); +#35321 = LINE('',#35322,#35323); +#35322 = CARTESIAN_POINT('',(-9.,-2.81,0.4)); +#35323 = VECTOR('',#35324,1.); +#35324 = DIRECTION('',(-0.,-0.,-1.)); +#35325 = PLANE('',#35326); +#35326 = AXIS2_PLACEMENT_3D('',#35327,#35328,#35329); +#35327 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35328 = DIRECTION('',(-1.,0.,0.)); +#35329 = DIRECTION('',(0.,1.,0.)); +#35330 = ADVANCED_FACE('',(#35331),#35379,.T.); +#35331 = FACE_BOUND('',#35332,.T.); +#35332 = EDGE_LOOP('',(#35333,#35334,#35342,#35350,#35356,#35357,#35365, + #35373)); +#35333 = ORIENTED_EDGE('',*,*,#31665,.F.); +#35334 = ORIENTED_EDGE('',*,*,#35335,.F.); +#35335 = EDGE_CURVE('',#35336,#31666,#35338,.T.); +#35336 = VERTEX_POINT('',#35337); +#35337 = CARTESIAN_POINT('',(9.,-2.81,0.4)); +#35338 = LINE('',#35339,#35340); +#35339 = CARTESIAN_POINT('',(9.,-2.81,0.4)); +#35340 = VECTOR('',#35341,1.); +#35341 = DIRECTION('',(0.,0.,-1.)); +#35342 = ORIENTED_EDGE('',*,*,#35343,.F.); +#35343 = EDGE_CURVE('',#35344,#35336,#35346,.T.); +#35344 = VERTEX_POINT('',#35345); +#35345 = CARTESIAN_POINT('',(9.000000214576,-2.81,0.799997854233)); +#35346 = LINE('',#35347,#35348); +#35347 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#35348 = VECTOR('',#35349,1.); +#35349 = DIRECTION('',(0.,0.,-1.)); +#35350 = ORIENTED_EDGE('',*,*,#35351,.F.); +#35351 = EDGE_CURVE('',#33317,#35344,#35352,.T.); +#35352 = LINE('',#35353,#35354); +#35353 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#35354 = VECTOR('',#35355,1.); +#35355 = DIRECTION('',(0.,0.,-1.)); +#35356 = ORIENTED_EDGE('',*,*,#33316,.T.); +#35357 = ORIENTED_EDGE('',*,*,#35358,.T.); +#35358 = EDGE_CURVE('',#33309,#35359,#35361,.T.); +#35359 = VERTEX_POINT('',#35360); +#35360 = CARTESIAN_POINT('',(9.000000214576,-3.18,0.799997854233)); +#35361 = LINE('',#35362,#35363); +#35362 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#35363 = VECTOR('',#35364,1.); +#35364 = DIRECTION('',(0.,0.,-1.)); +#35365 = ORIENTED_EDGE('',*,*,#35366,.T.); +#35366 = EDGE_CURVE('',#35359,#35367,#35369,.T.); +#35367 = VERTEX_POINT('',#35368); +#35368 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#35369 = LINE('',#35370,#35371); +#35370 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#35371 = VECTOR('',#35372,1.); +#35372 = DIRECTION('',(0.,0.,-1.)); +#35373 = ORIENTED_EDGE('',*,*,#35374,.T.); +#35374 = EDGE_CURVE('',#35367,#31658,#35375,.T.); +#35375 = LINE('',#35376,#35377); +#35376 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#35377 = VECTOR('',#35378,1.); +#35378 = DIRECTION('',(0.,0.,-1.)); +#35379 = PLANE('',#35380); +#35380 = AXIS2_PLACEMENT_3D('',#35381,#35382,#35383); +#35381 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35382 = DIRECTION('',(1.,0.,0.)); +#35383 = DIRECTION('',(0.,-1.,0.)); +#35384 = ADVANCED_FACE('',(#35385),#35415,.F.); +#35385 = FACE_BOUND('',#35386,.T.); +#35386 = EDGE_LOOP('',(#35387,#35398,#35404,#35405,#35406,#35407,#35408, + #35409)); +#35387 = ORIENTED_EDGE('',*,*,#35388,.T.); +#35388 = EDGE_CURVE('',#35389,#35391,#35393,.T.); +#35389 = VERTEX_POINT('',#35390); +#35390 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#35391 = VERTEX_POINT('',#35392); +#35392 = CARTESIAN_POINT('',(-9.,-3.355,0.)); +#35393 = CIRCLE('',#35394,0.275); +#35394 = AXIS2_PLACEMENT_3D('',#35395,#35396,#35397); +#35395 = CARTESIAN_POINT('',(-9.,-3.63,0.)); +#35396 = DIRECTION('',(0.,0.,1.)); +#35397 = DIRECTION('',(1.,0.,-0.)); +#35398 = ORIENTED_EDGE('',*,*,#35399,.F.); +#35399 = EDGE_CURVE('',#30498,#35391,#35400,.T.); +#35400 = LINE('',#35401,#35402); +#35401 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#35402 = VECTOR('',#35403,1.); +#35403 = DIRECTION('',(0.,-1.,0.)); +#35404 = ORIENTED_EDGE('',*,*,#30505,.T.); +#35405 = ORIENTED_EDGE('',*,*,#30513,.T.); +#35406 = ORIENTED_EDGE('',*,*,#30521,.T.); +#35407 = ORIENTED_EDGE('',*,*,#30529,.F.); +#35408 = ORIENTED_EDGE('',*,*,#30537,.T.); +#35409 = ORIENTED_EDGE('',*,*,#35410,.F.); +#35410 = EDGE_CURVE('',#35389,#30538,#35411,.T.); +#35411 = LINE('',#35412,#35413); +#35412 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#35413 = VECTOR('',#35414,1.); +#35414 = DIRECTION('',(0.,-1.,0.)); +#35415 = PLANE('',#35416); +#35416 = AXIS2_PLACEMENT_3D('',#35417,#35418,#35419); +#35417 = CARTESIAN_POINT('',(-8.571261896074,-3.63,0.)); +#35418 = DIRECTION('',(0.,0.,1.)); +#35419 = DIRECTION('',(1.,0.,-0.)); +#35420 = ADVANCED_FACE('',(#35421),#35447,.T.); +#35421 = FACE_BOUND('',#35422,.F.); +#35422 = EDGE_LOOP('',(#35423,#35433,#35439,#35440,#35441)); +#35423 = ORIENTED_EDGE('',*,*,#35424,.F.); +#35424 = EDGE_CURVE('',#35425,#35427,#35429,.T.); +#35425 = VERTEX_POINT('',#35426); +#35426 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.145767343E-06)); +#35427 = VERTEX_POINT('',#35428); +#35428 = CARTESIAN_POINT('',(8.150000023842,-3.18,-1.943111538E-06)); +#35429 = LINE('',#35430,#35431); +#35430 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#35431 = VECTOR('',#35432,1.); +#35432 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35433 = ORIENTED_EDGE('',*,*,#35434,.T.); +#35434 = EDGE_CURVE('',#35425,#31658,#35435,.T.); +#35435 = LINE('',#35436,#35437); +#35436 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#35437 = VECTOR('',#35438,1.); +#35438 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35439 = ORIENTED_EDGE('',*,*,#31657,.T.); +#35440 = ORIENTED_EDGE('',*,*,#31649,.T.); +#35441 = ORIENTED_EDGE('',*,*,#35442,.F.); +#35442 = EDGE_CURVE('',#35427,#31642,#35443,.T.); +#35443 = LINE('',#35444,#35445); +#35444 = CARTESIAN_POINT('',(8.150000023842,-3.18,-1.94311153833E-06)); +#35445 = VECTOR('',#35446,1.); +#35446 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35447 = PLANE('',#35448); +#35448 = AXIS2_PLACEMENT_3D('',#35449,#35450,#35451); +#35449 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#35450 = DIRECTION('',(0.,1.,0.)); +#35451 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35452 = ADVANCED_FACE('',(#35453),#35471,.T.); +#35453 = FACE_BOUND('',#35454,.F.); +#35454 = EDGE_LOOP('',(#35455,#35463,#35464,#35465)); +#35455 = ORIENTED_EDGE('',*,*,#35456,.F.); +#35456 = EDGE_CURVE('',#35427,#35457,#35459,.T.); +#35457 = VERTEX_POINT('',#35458); +#35458 = CARTESIAN_POINT('',(8.150000023842,-4.08,-1.943111538E-06)); +#35459 = LINE('',#35460,#35461); +#35460 = CARTESIAN_POINT('',(8.150000023842,-3.18,-1.94311153833E-06)); +#35461 = VECTOR('',#35462,1.); +#35462 = DIRECTION('',(0.,-1.,0.)); +#35463 = ORIENTED_EDGE('',*,*,#35442,.T.); +#35464 = ORIENTED_EDGE('',*,*,#31641,.T.); +#35465 = ORIENTED_EDGE('',*,*,#35466,.F.); +#35466 = EDGE_CURVE('',#35457,#31634,#35467,.T.); +#35467 = LINE('',#35468,#35469); +#35468 = CARTESIAN_POINT('',(8.150000023842,-4.08,-1.94311153833E-06)); +#35469 = VECTOR('',#35470,1.); +#35470 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35471 = PLANE('',#35472); +#35472 = AXIS2_PLACEMENT_3D('',#35473,#35474,#35475); +#35473 = CARTESIAN_POINT('',(8.150000023842,-3.18,-1.94311153833E-06)); +#35474 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35475 = DIRECTION('',(0.,1.,0.)); +#35476 = ADVANCED_FACE('',(#35477),#35496,.T.); +#35477 = FACE_BOUND('',#35478,.F.); +#35478 = EDGE_LOOP('',(#35479,#35487,#35488,#35489,#35490)); +#35479 = ORIENTED_EDGE('',*,*,#35480,.F.); +#35480 = EDGE_CURVE('',#35457,#35481,#35483,.T.); +#35481 = VERTEX_POINT('',#35482); +#35482 = CARTESIAN_POINT('',(9.000000023842,-4.08,-2.145767343E-06)); +#35483 = LINE('',#35484,#35485); +#35484 = CARTESIAN_POINT('',(8.150000023842,-4.08,-1.94311153833E-06)); +#35485 = VECTOR('',#35486,1.); +#35486 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35487 = ORIENTED_EDGE('',*,*,#35466,.T.); +#35488 = ORIENTED_EDGE('',*,*,#31633,.F.); +#35489 = ORIENTED_EDGE('',*,*,#31625,.T.); +#35490 = ORIENTED_EDGE('',*,*,#35491,.F.); +#35491 = EDGE_CURVE('',#35481,#31618,#35492,.T.); +#35492 = LINE('',#35493,#35494); +#35493 = CARTESIAN_POINT('',(9.000000023842,-4.08,-2.14576734264E-06)); +#35494 = VECTOR('',#35495,1.); +#35495 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35496 = PLANE('',#35497); +#35497 = AXIS2_PLACEMENT_3D('',#35498,#35499,#35500); +#35498 = CARTESIAN_POINT('',(8.150000023842,-4.08,-1.94311153833E-06)); +#35499 = DIRECTION('',(0.,-1.,0.)); +#35500 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35501 = ADVANCED_FACE('',(#35502),#35534,.T.); +#35502 = FACE_BOUND('',#35503,.T.); +#35503 = EDGE_LOOP('',(#35504,#35505,#35513,#35519,#35520,#35528)); +#35504 = ORIENTED_EDGE('',*,*,#30545,.F.); +#35505 = ORIENTED_EDGE('',*,*,#35506,.F.); +#35506 = EDGE_CURVE('',#35507,#30546,#35509,.T.); +#35507 = VERTEX_POINT('',#35508); +#35508 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#35509 = LINE('',#35510,#35511); +#35510 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#35511 = VECTOR('',#35512,1.); +#35512 = DIRECTION('',(-0.,-0.,-1.)); +#35513 = ORIENTED_EDGE('',*,*,#35514,.F.); +#35514 = EDGE_CURVE('',#32565,#35507,#35515,.T.); +#35515 = LINE('',#35516,#35517); +#35516 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#35517 = VECTOR('',#35518,1.); +#35518 = DIRECTION('',(-0.,-0.,-1.)); +#35519 = ORIENTED_EDGE('',*,*,#32564,.T.); +#35520 = ORIENTED_EDGE('',*,*,#35521,.T.); +#35521 = EDGE_CURVE('',#32557,#35522,#35524,.T.); +#35522 = VERTEX_POINT('',#35523); +#35523 = CARTESIAN_POINT('',(-9.,-4.08,0.4)); +#35524 = LINE('',#35525,#35526); +#35525 = CARTESIAN_POINT('',(-9.,-4.08,0.8)); +#35526 = VECTOR('',#35527,1.); +#35527 = DIRECTION('',(-0.,-0.,-1.)); +#35528 = ORIENTED_EDGE('',*,*,#35529,.T.); +#35529 = EDGE_CURVE('',#35522,#30538,#35530,.T.); +#35530 = LINE('',#35531,#35532); +#35531 = CARTESIAN_POINT('',(-9.,-4.08,0.4)); +#35532 = VECTOR('',#35533,1.); +#35533 = DIRECTION('',(-0.,-0.,-1.)); +#35534 = PLANE('',#35535); +#35535 = AXIS2_PLACEMENT_3D('',#35536,#35537,#35538); +#35536 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35537 = DIRECTION('',(-1.,0.,0.)); +#35538 = DIRECTION('',(0.,1.,0.)); +#35539 = ADVANCED_FACE('',(#35540),#35588,.T.); +#35540 = FACE_BOUND('',#35541,.T.); +#35541 = EDGE_LOOP('',(#35542,#35543,#35551,#35559,#35565,#35566,#35574, + #35582)); +#35542 = ORIENTED_EDGE('',*,*,#31617,.F.); +#35543 = ORIENTED_EDGE('',*,*,#35544,.F.); +#35544 = EDGE_CURVE('',#35545,#31618,#35547,.T.); +#35545 = VERTEX_POINT('',#35546); +#35546 = CARTESIAN_POINT('',(9.,-4.08,0.4)); +#35547 = LINE('',#35548,#35549); +#35548 = CARTESIAN_POINT('',(9.,-4.08,0.4)); +#35549 = VECTOR('',#35550,1.); +#35550 = DIRECTION('',(0.,0.,-1.)); +#35551 = ORIENTED_EDGE('',*,*,#35552,.F.); +#35552 = EDGE_CURVE('',#35553,#35545,#35555,.T.); +#35553 = VERTEX_POINT('',#35554); +#35554 = CARTESIAN_POINT('',(9.000000214576,-4.08,0.799997854233)); +#35555 = LINE('',#35556,#35557); +#35556 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#35557 = VECTOR('',#35558,1.); +#35558 = DIRECTION('',(0.,0.,-1.)); +#35559 = ORIENTED_EDGE('',*,*,#35560,.F.); +#35560 = EDGE_CURVE('',#33285,#35553,#35561,.T.); +#35561 = LINE('',#35562,#35563); +#35562 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#35563 = VECTOR('',#35564,1.); +#35564 = DIRECTION('',(0.,0.,-1.)); +#35565 = ORIENTED_EDGE('',*,*,#33284,.T.); +#35566 = ORIENTED_EDGE('',*,*,#35567,.T.); +#35567 = EDGE_CURVE('',#33277,#35568,#35570,.T.); +#35568 = VERTEX_POINT('',#35569); +#35569 = CARTESIAN_POINT('',(9.000000214576,-4.45,0.799997854233)); +#35570 = LINE('',#35571,#35572); +#35571 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#35572 = VECTOR('',#35573,1.); +#35573 = DIRECTION('',(0.,0.,-1.)); +#35574 = ORIENTED_EDGE('',*,*,#35575,.T.); +#35575 = EDGE_CURVE('',#35568,#35576,#35578,.T.); +#35576 = VERTEX_POINT('',#35577); +#35577 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#35578 = LINE('',#35579,#35580); +#35579 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#35580 = VECTOR('',#35581,1.); +#35581 = DIRECTION('',(0.,0.,-1.)); +#35582 = ORIENTED_EDGE('',*,*,#35583,.T.); +#35583 = EDGE_CURVE('',#35576,#31610,#35584,.T.); +#35584 = LINE('',#35585,#35586); +#35585 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#35586 = VECTOR('',#35587,1.); +#35587 = DIRECTION('',(0.,0.,-1.)); +#35588 = PLANE('',#35589); +#35589 = AXIS2_PLACEMENT_3D('',#35590,#35591,#35592); +#35590 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35591 = DIRECTION('',(1.,0.,0.)); +#35592 = DIRECTION('',(0.,-1.,0.)); +#35593 = ADVANCED_FACE('',(#35594),#35624,.F.); +#35594 = FACE_BOUND('',#35595,.T.); +#35595 = EDGE_LOOP('',(#35596,#35607,#35613,#35614,#35615,#35616,#35617, + #35618)); +#35596 = ORIENTED_EDGE('',*,*,#35597,.T.); +#35597 = EDGE_CURVE('',#35598,#35600,#35602,.T.); +#35598 = VERTEX_POINT('',#35599); +#35599 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#35600 = VERTEX_POINT('',#35601); +#35601 = CARTESIAN_POINT('',(-9.,-4.625,0.)); +#35602 = CIRCLE('',#35603,0.275); +#35603 = AXIS2_PLACEMENT_3D('',#35604,#35605,#35606); +#35604 = CARTESIAN_POINT('',(-9.,-4.9,0.)); +#35605 = DIRECTION('',(0.,0.,1.)); +#35606 = DIRECTION('',(1.,0.,-0.)); +#35607 = ORIENTED_EDGE('',*,*,#35608,.F.); +#35608 = EDGE_CURVE('',#30546,#35600,#35609,.T.); +#35609 = LINE('',#35610,#35611); +#35610 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#35611 = VECTOR('',#35612,1.); +#35612 = DIRECTION('',(0.,-1.,0.)); +#35613 = ORIENTED_EDGE('',*,*,#30553,.T.); +#35614 = ORIENTED_EDGE('',*,*,#30561,.T.); +#35615 = ORIENTED_EDGE('',*,*,#30569,.T.); +#35616 = ORIENTED_EDGE('',*,*,#30577,.F.); +#35617 = ORIENTED_EDGE('',*,*,#30585,.T.); +#35618 = ORIENTED_EDGE('',*,*,#35619,.F.); +#35619 = EDGE_CURVE('',#35598,#30586,#35620,.T.); +#35620 = LINE('',#35621,#35622); +#35621 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#35622 = VECTOR('',#35623,1.); +#35623 = DIRECTION('',(0.,-1.,0.)); +#35624 = PLANE('',#35625); +#35625 = AXIS2_PLACEMENT_3D('',#35626,#35627,#35628); +#35626 = CARTESIAN_POINT('',(-8.571261896074,-4.9,0.)); +#35627 = DIRECTION('',(0.,0.,1.)); +#35628 = DIRECTION('',(1.,0.,-0.)); +#35629 = ADVANCED_FACE('',(#35630),#35656,.T.); +#35630 = FACE_BOUND('',#35631,.F.); +#35631 = EDGE_LOOP('',(#35632,#35642,#35648,#35649,#35650)); +#35632 = ORIENTED_EDGE('',*,*,#35633,.F.); +#35633 = EDGE_CURVE('',#35634,#35636,#35638,.T.); +#35634 = VERTEX_POINT('',#35635); +#35635 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.145767343E-06)); +#35636 = VERTEX_POINT('',#35637); +#35637 = CARTESIAN_POINT('',(8.150000023842,-4.45,-1.943111538E-06)); +#35638 = LINE('',#35639,#35640); +#35639 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#35640 = VECTOR('',#35641,1.); +#35641 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35642 = ORIENTED_EDGE('',*,*,#35643,.T.); +#35643 = EDGE_CURVE('',#35634,#31610,#35644,.T.); +#35644 = LINE('',#35645,#35646); +#35645 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#35646 = VECTOR('',#35647,1.); +#35647 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35648 = ORIENTED_EDGE('',*,*,#31609,.T.); +#35649 = ORIENTED_EDGE('',*,*,#31601,.T.); +#35650 = ORIENTED_EDGE('',*,*,#35651,.F.); +#35651 = EDGE_CURVE('',#35636,#31594,#35652,.T.); +#35652 = LINE('',#35653,#35654); +#35653 = CARTESIAN_POINT('',(8.150000023842,-4.45,-1.94311153833E-06)); +#35654 = VECTOR('',#35655,1.); +#35655 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35656 = PLANE('',#35657); +#35657 = AXIS2_PLACEMENT_3D('',#35658,#35659,#35660); +#35658 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#35659 = DIRECTION('',(0.,1.,0.)); +#35660 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35661 = ADVANCED_FACE('',(#35662),#35680,.T.); +#35662 = FACE_BOUND('',#35663,.F.); +#35663 = EDGE_LOOP('',(#35664,#35672,#35673,#35674)); +#35664 = ORIENTED_EDGE('',*,*,#35665,.F.); +#35665 = EDGE_CURVE('',#35636,#35666,#35668,.T.); +#35666 = VERTEX_POINT('',#35667); +#35667 = CARTESIAN_POINT('',(8.150000023842,-5.35,-1.943111538E-06)); +#35668 = LINE('',#35669,#35670); +#35669 = CARTESIAN_POINT('',(8.150000023842,-4.45,-1.94311153833E-06)); +#35670 = VECTOR('',#35671,1.); +#35671 = DIRECTION('',(0.,-1.,0.)); +#35672 = ORIENTED_EDGE('',*,*,#35651,.T.); +#35673 = ORIENTED_EDGE('',*,*,#31593,.T.); +#35674 = ORIENTED_EDGE('',*,*,#35675,.F.); +#35675 = EDGE_CURVE('',#35666,#31586,#35676,.T.); +#35676 = LINE('',#35677,#35678); +#35677 = CARTESIAN_POINT('',(8.150000023842,-5.35,-1.94311153833E-06)); +#35678 = VECTOR('',#35679,1.); +#35679 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35680 = PLANE('',#35681); +#35681 = AXIS2_PLACEMENT_3D('',#35682,#35683,#35684); +#35682 = CARTESIAN_POINT('',(8.150000023842,-4.45,-1.94311153833E-06)); +#35683 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35684 = DIRECTION('',(0.,1.,0.)); +#35685 = ADVANCED_FACE('',(#35686),#35705,.T.); +#35686 = FACE_BOUND('',#35687,.F.); +#35687 = EDGE_LOOP('',(#35688,#35696,#35697,#35698,#35699)); +#35688 = ORIENTED_EDGE('',*,*,#35689,.F.); +#35689 = EDGE_CURVE('',#35666,#35690,#35692,.T.); +#35690 = VERTEX_POINT('',#35691); +#35691 = CARTESIAN_POINT('',(9.000000023842,-5.35,-2.145767343E-06)); +#35692 = LINE('',#35693,#35694); +#35693 = CARTESIAN_POINT('',(8.150000023842,-5.35,-1.94311153833E-06)); +#35694 = VECTOR('',#35695,1.); +#35695 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35696 = ORIENTED_EDGE('',*,*,#35675,.T.); +#35697 = ORIENTED_EDGE('',*,*,#31585,.F.); +#35698 = ORIENTED_EDGE('',*,*,#31577,.T.); +#35699 = ORIENTED_EDGE('',*,*,#35700,.F.); +#35700 = EDGE_CURVE('',#35690,#31570,#35701,.T.); +#35701 = LINE('',#35702,#35703); +#35702 = CARTESIAN_POINT('',(9.000000023842,-5.35,-2.14576734264E-06)); +#35703 = VECTOR('',#35704,1.); +#35704 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35705 = PLANE('',#35706); +#35706 = AXIS2_PLACEMENT_3D('',#35707,#35708,#35709); +#35707 = CARTESIAN_POINT('',(8.150000023842,-5.35,-1.94311153833E-06)); +#35708 = DIRECTION('',(0.,-1.,0.)); +#35709 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35710 = ADVANCED_FACE('',(#35711),#35743,.T.); +#35711 = FACE_BOUND('',#35712,.T.); +#35712 = EDGE_LOOP('',(#35713,#35714,#35722,#35728,#35729,#35737)); +#35713 = ORIENTED_EDGE('',*,*,#30593,.F.); +#35714 = ORIENTED_EDGE('',*,*,#35715,.F.); +#35715 = EDGE_CURVE('',#35716,#30594,#35718,.T.); +#35716 = VERTEX_POINT('',#35717); +#35717 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#35718 = LINE('',#35719,#35720); +#35719 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#35720 = VECTOR('',#35721,1.); +#35721 = DIRECTION('',(-0.,-0.,-1.)); +#35722 = ORIENTED_EDGE('',*,*,#35723,.F.); +#35723 = EDGE_CURVE('',#32597,#35716,#35724,.T.); +#35724 = LINE('',#35725,#35726); +#35725 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#35726 = VECTOR('',#35727,1.); +#35727 = DIRECTION('',(-0.,-0.,-1.)); +#35728 = ORIENTED_EDGE('',*,*,#32596,.T.); +#35729 = ORIENTED_EDGE('',*,*,#35730,.T.); +#35730 = EDGE_CURVE('',#32589,#35731,#35733,.T.); +#35731 = VERTEX_POINT('',#35732); +#35732 = CARTESIAN_POINT('',(-9.,-5.35,0.4)); +#35733 = LINE('',#35734,#35735); +#35734 = CARTESIAN_POINT('',(-9.,-5.35,0.8)); +#35735 = VECTOR('',#35736,1.); +#35736 = DIRECTION('',(-0.,-0.,-1.)); +#35737 = ORIENTED_EDGE('',*,*,#35738,.T.); +#35738 = EDGE_CURVE('',#35731,#30586,#35739,.T.); +#35739 = LINE('',#35740,#35741); +#35740 = CARTESIAN_POINT('',(-9.,-5.35,0.4)); +#35741 = VECTOR('',#35742,1.); +#35742 = DIRECTION('',(-0.,-0.,-1.)); +#35743 = PLANE('',#35744); +#35744 = AXIS2_PLACEMENT_3D('',#35745,#35746,#35747); +#35745 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35746 = DIRECTION('',(-1.,0.,0.)); +#35747 = DIRECTION('',(0.,1.,0.)); +#35748 = ADVANCED_FACE('',(#35749),#35797,.T.); +#35749 = FACE_BOUND('',#35750,.T.); +#35750 = EDGE_LOOP('',(#35751,#35752,#35760,#35768,#35774,#35775,#35783, + #35791)); +#35751 = ORIENTED_EDGE('',*,*,#31569,.F.); +#35752 = ORIENTED_EDGE('',*,*,#35753,.F.); +#35753 = EDGE_CURVE('',#35754,#31570,#35756,.T.); +#35754 = VERTEX_POINT('',#35755); +#35755 = CARTESIAN_POINT('',(9.,-5.35,0.4)); +#35756 = LINE('',#35757,#35758); +#35757 = CARTESIAN_POINT('',(9.,-5.35,0.4)); +#35758 = VECTOR('',#35759,1.); +#35759 = DIRECTION('',(0.,0.,-1.)); +#35760 = ORIENTED_EDGE('',*,*,#35761,.F.); +#35761 = EDGE_CURVE('',#35762,#35754,#35764,.T.); +#35762 = VERTEX_POINT('',#35763); +#35763 = CARTESIAN_POINT('',(9.000000214576,-5.35,0.799997854233)); +#35764 = LINE('',#35765,#35766); +#35765 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#35766 = VECTOR('',#35767,1.); +#35767 = DIRECTION('',(0.,0.,-1.)); +#35768 = ORIENTED_EDGE('',*,*,#35769,.F.); +#35769 = EDGE_CURVE('',#33253,#35762,#35770,.T.); +#35770 = LINE('',#35771,#35772); +#35771 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#35772 = VECTOR('',#35773,1.); +#35773 = DIRECTION('',(0.,0.,-1.)); +#35774 = ORIENTED_EDGE('',*,*,#33252,.T.); +#35775 = ORIENTED_EDGE('',*,*,#35776,.T.); +#35776 = EDGE_CURVE('',#33245,#35777,#35779,.T.); +#35777 = VERTEX_POINT('',#35778); +#35778 = CARTESIAN_POINT('',(9.000000214576,-5.72,0.799997854233)); +#35779 = LINE('',#35780,#35781); +#35780 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#35781 = VECTOR('',#35782,1.); +#35782 = DIRECTION('',(0.,0.,-1.)); +#35783 = ORIENTED_EDGE('',*,*,#35784,.T.); +#35784 = EDGE_CURVE('',#35777,#35785,#35787,.T.); +#35785 = VERTEX_POINT('',#35786); +#35786 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#35787 = LINE('',#35788,#35789); +#35788 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#35789 = VECTOR('',#35790,1.); +#35790 = DIRECTION('',(0.,0.,-1.)); +#35791 = ORIENTED_EDGE('',*,*,#35792,.T.); +#35792 = EDGE_CURVE('',#35785,#31562,#35793,.T.); +#35793 = LINE('',#35794,#35795); +#35794 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#35795 = VECTOR('',#35796,1.); +#35796 = DIRECTION('',(0.,0.,-1.)); +#35797 = PLANE('',#35798); +#35798 = AXIS2_PLACEMENT_3D('',#35799,#35800,#35801); +#35799 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35800 = DIRECTION('',(1.,0.,0.)); +#35801 = DIRECTION('',(0.,-1.,0.)); +#35802 = ADVANCED_FACE('',(#35803),#35833,.F.); +#35803 = FACE_BOUND('',#35804,.T.); +#35804 = EDGE_LOOP('',(#35805,#35816,#35822,#35823,#35824,#35825,#35826, + #35827)); +#35805 = ORIENTED_EDGE('',*,*,#35806,.T.); +#35806 = EDGE_CURVE('',#35807,#35809,#35811,.T.); +#35807 = VERTEX_POINT('',#35808); +#35808 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#35809 = VERTEX_POINT('',#35810); +#35810 = CARTESIAN_POINT('',(-9.,-5.895,0.)); +#35811 = CIRCLE('',#35812,0.275); +#35812 = AXIS2_PLACEMENT_3D('',#35813,#35814,#35815); +#35813 = CARTESIAN_POINT('',(-9.,-6.17,0.)); +#35814 = DIRECTION('',(0.,0.,1.)); +#35815 = DIRECTION('',(1.,0.,-0.)); +#35816 = ORIENTED_EDGE('',*,*,#35817,.F.); +#35817 = EDGE_CURVE('',#30594,#35809,#35818,.T.); +#35818 = LINE('',#35819,#35820); +#35819 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#35820 = VECTOR('',#35821,1.); +#35821 = DIRECTION('',(0.,-1.,0.)); +#35822 = ORIENTED_EDGE('',*,*,#30601,.T.); +#35823 = ORIENTED_EDGE('',*,*,#30609,.T.); +#35824 = ORIENTED_EDGE('',*,*,#30617,.T.); +#35825 = ORIENTED_EDGE('',*,*,#30625,.F.); +#35826 = ORIENTED_EDGE('',*,*,#30633,.T.); +#35827 = ORIENTED_EDGE('',*,*,#35828,.F.); +#35828 = EDGE_CURVE('',#35807,#30634,#35829,.T.); +#35829 = LINE('',#35830,#35831); +#35830 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#35831 = VECTOR('',#35832,1.); +#35832 = DIRECTION('',(0.,-1.,0.)); +#35833 = PLANE('',#35834); +#35834 = AXIS2_PLACEMENT_3D('',#35835,#35836,#35837); +#35835 = CARTESIAN_POINT('',(-8.571261896074,-6.17,0.)); +#35836 = DIRECTION('',(0.,0.,1.)); +#35837 = DIRECTION('',(1.,0.,-0.)); +#35838 = ADVANCED_FACE('',(#35839),#35865,.T.); +#35839 = FACE_BOUND('',#35840,.F.); +#35840 = EDGE_LOOP('',(#35841,#35851,#35857,#35858,#35859)); +#35841 = ORIENTED_EDGE('',*,*,#35842,.F.); +#35842 = EDGE_CURVE('',#35843,#35845,#35847,.T.); +#35843 = VERTEX_POINT('',#35844); +#35844 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.145767343E-06)); +#35845 = VERTEX_POINT('',#35846); +#35846 = CARTESIAN_POINT('',(8.150000023842,-5.72,-1.943111538E-06)); +#35847 = LINE('',#35848,#35849); +#35848 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#35849 = VECTOR('',#35850,1.); +#35850 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35851 = ORIENTED_EDGE('',*,*,#35852,.T.); +#35852 = EDGE_CURVE('',#35843,#31562,#35853,.T.); +#35853 = LINE('',#35854,#35855); +#35854 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#35855 = VECTOR('',#35856,1.); +#35856 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35857 = ORIENTED_EDGE('',*,*,#31561,.T.); +#35858 = ORIENTED_EDGE('',*,*,#31553,.T.); +#35859 = ORIENTED_EDGE('',*,*,#35860,.F.); +#35860 = EDGE_CURVE('',#35845,#31546,#35861,.T.); +#35861 = LINE('',#35862,#35863); +#35862 = CARTESIAN_POINT('',(8.150000023842,-5.72,-1.94311153833E-06)); +#35863 = VECTOR('',#35864,1.); +#35864 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35865 = PLANE('',#35866); +#35866 = AXIS2_PLACEMENT_3D('',#35867,#35868,#35869); +#35867 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#35868 = DIRECTION('',(0.,1.,0.)); +#35869 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35870 = ADVANCED_FACE('',(#35871),#35889,.T.); +#35871 = FACE_BOUND('',#35872,.F.); +#35872 = EDGE_LOOP('',(#35873,#35881,#35882,#35883)); +#35873 = ORIENTED_EDGE('',*,*,#35874,.F.); +#35874 = EDGE_CURVE('',#35845,#35875,#35877,.T.); +#35875 = VERTEX_POINT('',#35876); +#35876 = CARTESIAN_POINT('',(8.150000023842,-6.62,-1.943111538E-06)); +#35877 = LINE('',#35878,#35879); +#35878 = CARTESIAN_POINT('',(8.150000023842,-5.72,-1.94311153833E-06)); +#35879 = VECTOR('',#35880,1.); +#35880 = DIRECTION('',(0.,-1.,0.)); +#35881 = ORIENTED_EDGE('',*,*,#35860,.T.); +#35882 = ORIENTED_EDGE('',*,*,#31545,.T.); +#35883 = ORIENTED_EDGE('',*,*,#35884,.F.); +#35884 = EDGE_CURVE('',#35875,#31538,#35885,.T.); +#35885 = LINE('',#35886,#35887); +#35886 = CARTESIAN_POINT('',(8.150000023842,-6.62,-1.94311153833E-06)); +#35887 = VECTOR('',#35888,1.); +#35888 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35889 = PLANE('',#35890); +#35890 = AXIS2_PLACEMENT_3D('',#35891,#35892,#35893); +#35891 = CARTESIAN_POINT('',(8.150000023842,-5.72,-1.94311153833E-06)); +#35892 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35893 = DIRECTION('',(0.,1.,0.)); +#35894 = ADVANCED_FACE('',(#35895),#35914,.T.); +#35895 = FACE_BOUND('',#35896,.F.); +#35896 = EDGE_LOOP('',(#35897,#35905,#35906,#35907,#35908)); +#35897 = ORIENTED_EDGE('',*,*,#35898,.F.); +#35898 = EDGE_CURVE('',#35875,#35899,#35901,.T.); +#35899 = VERTEX_POINT('',#35900); +#35900 = CARTESIAN_POINT('',(9.000000023842,-6.62,-2.145767343E-06)); +#35901 = LINE('',#35902,#35903); +#35902 = CARTESIAN_POINT('',(8.150000023842,-6.62,-1.94311153833E-06)); +#35903 = VECTOR('',#35904,1.); +#35904 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#35905 = ORIENTED_EDGE('',*,*,#35884,.T.); +#35906 = ORIENTED_EDGE('',*,*,#31537,.F.); +#35907 = ORIENTED_EDGE('',*,*,#31529,.T.); +#35908 = ORIENTED_EDGE('',*,*,#35909,.F.); +#35909 = EDGE_CURVE('',#35899,#31522,#35910,.T.); +#35910 = LINE('',#35911,#35912); +#35911 = CARTESIAN_POINT('',(9.000000023842,-6.62,-2.14576734264E-06)); +#35912 = VECTOR('',#35913,1.); +#35913 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#35914 = PLANE('',#35915); +#35915 = AXIS2_PLACEMENT_3D('',#35916,#35917,#35918); +#35916 = CARTESIAN_POINT('',(8.150000023842,-6.62,-1.94311153833E-06)); +#35917 = DIRECTION('',(0.,-1.,0.)); +#35918 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#35919 = ADVANCED_FACE('',(#35920),#35952,.T.); +#35920 = FACE_BOUND('',#35921,.T.); +#35921 = EDGE_LOOP('',(#35922,#35923,#35931,#35937,#35938,#35946)); +#35922 = ORIENTED_EDGE('',*,*,#30641,.F.); +#35923 = ORIENTED_EDGE('',*,*,#35924,.F.); +#35924 = EDGE_CURVE('',#35925,#30642,#35927,.T.); +#35925 = VERTEX_POINT('',#35926); +#35926 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#35927 = LINE('',#35928,#35929); +#35928 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#35929 = VECTOR('',#35930,1.); +#35930 = DIRECTION('',(-0.,-0.,-1.)); +#35931 = ORIENTED_EDGE('',*,*,#35932,.F.); +#35932 = EDGE_CURVE('',#32629,#35925,#35933,.T.); +#35933 = LINE('',#35934,#35935); +#35934 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#35935 = VECTOR('',#35936,1.); +#35936 = DIRECTION('',(-0.,-0.,-1.)); +#35937 = ORIENTED_EDGE('',*,*,#32628,.T.); +#35938 = ORIENTED_EDGE('',*,*,#35939,.T.); +#35939 = EDGE_CURVE('',#32621,#35940,#35942,.T.); +#35940 = VERTEX_POINT('',#35941); +#35941 = CARTESIAN_POINT('',(-9.,-6.62,0.4)); +#35942 = LINE('',#35943,#35944); +#35943 = CARTESIAN_POINT('',(-9.,-6.62,0.8)); +#35944 = VECTOR('',#35945,1.); +#35945 = DIRECTION('',(-0.,-0.,-1.)); +#35946 = ORIENTED_EDGE('',*,*,#35947,.T.); +#35947 = EDGE_CURVE('',#35940,#30634,#35948,.T.); +#35948 = LINE('',#35949,#35950); +#35949 = CARTESIAN_POINT('',(-9.,-6.62,0.4)); +#35950 = VECTOR('',#35951,1.); +#35951 = DIRECTION('',(-0.,-0.,-1.)); +#35952 = PLANE('',#35953); +#35953 = AXIS2_PLACEMENT_3D('',#35954,#35955,#35956); +#35954 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35955 = DIRECTION('',(-1.,0.,0.)); +#35956 = DIRECTION('',(0.,1.,0.)); +#35957 = ADVANCED_FACE('',(#35958),#36006,.T.); +#35958 = FACE_BOUND('',#35959,.T.); +#35959 = EDGE_LOOP('',(#35960,#35961,#35969,#35977,#35983,#35984,#35992, + #36000)); +#35960 = ORIENTED_EDGE('',*,*,#31521,.F.); +#35961 = ORIENTED_EDGE('',*,*,#35962,.F.); +#35962 = EDGE_CURVE('',#35963,#31522,#35965,.T.); +#35963 = VERTEX_POINT('',#35964); +#35964 = CARTESIAN_POINT('',(9.,-6.62,0.4)); +#35965 = LINE('',#35966,#35967); +#35966 = CARTESIAN_POINT('',(9.,-6.62,0.4)); +#35967 = VECTOR('',#35968,1.); +#35968 = DIRECTION('',(0.,0.,-1.)); +#35969 = ORIENTED_EDGE('',*,*,#35970,.F.); +#35970 = EDGE_CURVE('',#35971,#35963,#35973,.T.); +#35971 = VERTEX_POINT('',#35972); +#35972 = CARTESIAN_POINT('',(9.000000214576,-6.62,0.799997854233)); +#35973 = LINE('',#35974,#35975); +#35974 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#35975 = VECTOR('',#35976,1.); +#35976 = DIRECTION('',(0.,0.,-1.)); +#35977 = ORIENTED_EDGE('',*,*,#35978,.F.); +#35978 = EDGE_CURVE('',#33221,#35971,#35979,.T.); +#35979 = LINE('',#35980,#35981); +#35980 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#35981 = VECTOR('',#35982,1.); +#35982 = DIRECTION('',(0.,0.,-1.)); +#35983 = ORIENTED_EDGE('',*,*,#33220,.T.); +#35984 = ORIENTED_EDGE('',*,*,#35985,.T.); +#35985 = EDGE_CURVE('',#33213,#35986,#35988,.T.); +#35986 = VERTEX_POINT('',#35987); +#35987 = CARTESIAN_POINT('',(9.000000214576,-6.99,0.799997854233)); +#35988 = LINE('',#35989,#35990); +#35989 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#35990 = VECTOR('',#35991,1.); +#35991 = DIRECTION('',(0.,0.,-1.)); +#35992 = ORIENTED_EDGE('',*,*,#35993,.T.); +#35993 = EDGE_CURVE('',#35986,#35994,#35996,.T.); +#35994 = VERTEX_POINT('',#35995); +#35995 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#35996 = LINE('',#35997,#35998); +#35997 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#35998 = VECTOR('',#35999,1.); +#35999 = DIRECTION('',(0.,0.,-1.)); +#36000 = ORIENTED_EDGE('',*,*,#36001,.T.); +#36001 = EDGE_CURVE('',#35994,#31514,#36002,.T.); +#36002 = LINE('',#36003,#36004); +#36003 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#36004 = VECTOR('',#36005,1.); +#36005 = DIRECTION('',(0.,0.,-1.)); +#36006 = PLANE('',#36007); +#36007 = AXIS2_PLACEMENT_3D('',#36008,#36009,#36010); +#36008 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36009 = DIRECTION('',(1.,0.,0.)); +#36010 = DIRECTION('',(0.,-1.,0.)); +#36011 = ADVANCED_FACE('',(#36012),#36042,.F.); +#36012 = FACE_BOUND('',#36013,.T.); +#36013 = EDGE_LOOP('',(#36014,#36025,#36031,#36032,#36033,#36034,#36035, + #36036)); +#36014 = ORIENTED_EDGE('',*,*,#36015,.T.); +#36015 = EDGE_CURVE('',#36016,#36018,#36020,.T.); +#36016 = VERTEX_POINT('',#36017); +#36017 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#36018 = VERTEX_POINT('',#36019); +#36019 = CARTESIAN_POINT('',(-9.,-7.165,0.)); +#36020 = CIRCLE('',#36021,0.275); +#36021 = AXIS2_PLACEMENT_3D('',#36022,#36023,#36024); +#36022 = CARTESIAN_POINT('',(-9.,-7.44,0.)); +#36023 = DIRECTION('',(0.,0.,1.)); +#36024 = DIRECTION('',(1.,0.,-0.)); +#36025 = ORIENTED_EDGE('',*,*,#36026,.F.); +#36026 = EDGE_CURVE('',#30642,#36018,#36027,.T.); +#36027 = LINE('',#36028,#36029); +#36028 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#36029 = VECTOR('',#36030,1.); +#36030 = DIRECTION('',(0.,-1.,0.)); +#36031 = ORIENTED_EDGE('',*,*,#30649,.T.); +#36032 = ORIENTED_EDGE('',*,*,#30657,.T.); +#36033 = ORIENTED_EDGE('',*,*,#30665,.T.); +#36034 = ORIENTED_EDGE('',*,*,#30673,.F.); +#36035 = ORIENTED_EDGE('',*,*,#30681,.T.); +#36036 = ORIENTED_EDGE('',*,*,#36037,.F.); +#36037 = EDGE_CURVE('',#36016,#30682,#36038,.T.); +#36038 = LINE('',#36039,#36040); +#36039 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#36040 = VECTOR('',#36041,1.); +#36041 = DIRECTION('',(0.,-1.,0.)); +#36042 = PLANE('',#36043); +#36043 = AXIS2_PLACEMENT_3D('',#36044,#36045,#36046); +#36044 = CARTESIAN_POINT('',(-8.571261896074,-7.44,0.)); +#36045 = DIRECTION('',(0.,0.,1.)); +#36046 = DIRECTION('',(1.,0.,-0.)); +#36047 = ADVANCED_FACE('',(#36048),#36074,.T.); +#36048 = FACE_BOUND('',#36049,.F.); +#36049 = EDGE_LOOP('',(#36050,#36060,#36066,#36067,#36068)); +#36050 = ORIENTED_EDGE('',*,*,#36051,.F.); +#36051 = EDGE_CURVE('',#36052,#36054,#36056,.T.); +#36052 = VERTEX_POINT('',#36053); +#36053 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.145767343E-06)); +#36054 = VERTEX_POINT('',#36055); +#36055 = CARTESIAN_POINT('',(8.150000023842,-6.99,-1.943111538E-06)); +#36056 = LINE('',#36057,#36058); +#36057 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#36058 = VECTOR('',#36059,1.); +#36059 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36060 = ORIENTED_EDGE('',*,*,#36061,.T.); +#36061 = EDGE_CURVE('',#36052,#31514,#36062,.T.); +#36062 = LINE('',#36063,#36064); +#36063 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#36064 = VECTOR('',#36065,1.); +#36065 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36066 = ORIENTED_EDGE('',*,*,#31513,.T.); +#36067 = ORIENTED_EDGE('',*,*,#31505,.T.); +#36068 = ORIENTED_EDGE('',*,*,#36069,.F.); +#36069 = EDGE_CURVE('',#36054,#31498,#36070,.T.); +#36070 = LINE('',#36071,#36072); +#36071 = CARTESIAN_POINT('',(8.150000023842,-6.99,-1.94311153833E-06)); +#36072 = VECTOR('',#36073,1.); +#36073 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36074 = PLANE('',#36075); +#36075 = AXIS2_PLACEMENT_3D('',#36076,#36077,#36078); +#36076 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#36077 = DIRECTION('',(0.,1.,0.)); +#36078 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36079 = ADVANCED_FACE('',(#36080),#36098,.T.); +#36080 = FACE_BOUND('',#36081,.F.); +#36081 = EDGE_LOOP('',(#36082,#36090,#36091,#36092)); +#36082 = ORIENTED_EDGE('',*,*,#36083,.F.); +#36083 = EDGE_CURVE('',#36054,#36084,#36086,.T.); +#36084 = VERTEX_POINT('',#36085); +#36085 = CARTESIAN_POINT('',(8.150000023842,-7.89,-1.943111538E-06)); +#36086 = LINE('',#36087,#36088); +#36087 = CARTESIAN_POINT('',(8.150000023842,-6.99,-1.94311153833E-06)); +#36088 = VECTOR('',#36089,1.); +#36089 = DIRECTION('',(0.,-1.,0.)); +#36090 = ORIENTED_EDGE('',*,*,#36069,.T.); +#36091 = ORIENTED_EDGE('',*,*,#31497,.T.); +#36092 = ORIENTED_EDGE('',*,*,#36093,.F.); +#36093 = EDGE_CURVE('',#36084,#31490,#36094,.T.); +#36094 = LINE('',#36095,#36096); +#36095 = CARTESIAN_POINT('',(8.150000023842,-7.89,-1.94311153833E-06)); +#36096 = VECTOR('',#36097,1.); +#36097 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36098 = PLANE('',#36099); +#36099 = AXIS2_PLACEMENT_3D('',#36100,#36101,#36102); +#36100 = CARTESIAN_POINT('',(8.150000023842,-6.99,-1.94311153833E-06)); +#36101 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36102 = DIRECTION('',(0.,1.,0.)); +#36103 = ADVANCED_FACE('',(#36104),#36123,.T.); +#36104 = FACE_BOUND('',#36105,.F.); +#36105 = EDGE_LOOP('',(#36106,#36114,#36115,#36116,#36117)); +#36106 = ORIENTED_EDGE('',*,*,#36107,.F.); +#36107 = EDGE_CURVE('',#36084,#36108,#36110,.T.); +#36108 = VERTEX_POINT('',#36109); +#36109 = CARTESIAN_POINT('',(9.000000023842,-7.89,-2.145767343E-06)); +#36110 = LINE('',#36111,#36112); +#36111 = CARTESIAN_POINT('',(8.150000023842,-7.89,-1.94311153833E-06)); +#36112 = VECTOR('',#36113,1.); +#36113 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36114 = ORIENTED_EDGE('',*,*,#36093,.T.); +#36115 = ORIENTED_EDGE('',*,*,#31489,.F.); +#36116 = ORIENTED_EDGE('',*,*,#31481,.T.); +#36117 = ORIENTED_EDGE('',*,*,#36118,.F.); +#36118 = EDGE_CURVE('',#36108,#31474,#36119,.T.); +#36119 = LINE('',#36120,#36121); +#36120 = CARTESIAN_POINT('',(9.000000023842,-7.89,-2.14576734264E-06)); +#36121 = VECTOR('',#36122,1.); +#36122 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36123 = PLANE('',#36124); +#36124 = AXIS2_PLACEMENT_3D('',#36125,#36126,#36127); +#36125 = CARTESIAN_POINT('',(8.150000023842,-7.89,-1.94311153833E-06)); +#36126 = DIRECTION('',(0.,-1.,0.)); +#36127 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36128 = ADVANCED_FACE('',(#36129),#36161,.T.); +#36129 = FACE_BOUND('',#36130,.T.); +#36130 = EDGE_LOOP('',(#36131,#36132,#36140,#36146,#36147,#36155)); +#36131 = ORIENTED_EDGE('',*,*,#30689,.F.); +#36132 = ORIENTED_EDGE('',*,*,#36133,.F.); +#36133 = EDGE_CURVE('',#36134,#30690,#36136,.T.); +#36134 = VERTEX_POINT('',#36135); +#36135 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#36136 = LINE('',#36137,#36138); +#36137 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#36138 = VECTOR('',#36139,1.); +#36139 = DIRECTION('',(-0.,-0.,-1.)); +#36140 = ORIENTED_EDGE('',*,*,#36141,.F.); +#36141 = EDGE_CURVE('',#32661,#36134,#36142,.T.); +#36142 = LINE('',#36143,#36144); +#36143 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#36144 = VECTOR('',#36145,1.); +#36145 = DIRECTION('',(-0.,-0.,-1.)); +#36146 = ORIENTED_EDGE('',*,*,#32660,.T.); +#36147 = ORIENTED_EDGE('',*,*,#36148,.T.); +#36148 = EDGE_CURVE('',#32653,#36149,#36151,.T.); +#36149 = VERTEX_POINT('',#36150); +#36150 = CARTESIAN_POINT('',(-9.,-7.89,0.4)); +#36151 = LINE('',#36152,#36153); +#36152 = CARTESIAN_POINT('',(-9.,-7.89,0.8)); +#36153 = VECTOR('',#36154,1.); +#36154 = DIRECTION('',(-0.,-0.,-1.)); +#36155 = ORIENTED_EDGE('',*,*,#36156,.T.); +#36156 = EDGE_CURVE('',#36149,#30682,#36157,.T.); +#36157 = LINE('',#36158,#36159); +#36158 = CARTESIAN_POINT('',(-9.,-7.89,0.4)); +#36159 = VECTOR('',#36160,1.); +#36160 = DIRECTION('',(-0.,-0.,-1.)); +#36161 = PLANE('',#36162); +#36162 = AXIS2_PLACEMENT_3D('',#36163,#36164,#36165); +#36163 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#36164 = DIRECTION('',(-1.,0.,0.)); +#36165 = DIRECTION('',(0.,1.,0.)); +#36166 = ADVANCED_FACE('',(#36167),#36215,.T.); +#36167 = FACE_BOUND('',#36168,.T.); +#36168 = EDGE_LOOP('',(#36169,#36170,#36178,#36186,#36192,#36193,#36201, + #36209)); +#36169 = ORIENTED_EDGE('',*,*,#31473,.F.); +#36170 = ORIENTED_EDGE('',*,*,#36171,.F.); +#36171 = EDGE_CURVE('',#36172,#31474,#36174,.T.); +#36172 = VERTEX_POINT('',#36173); +#36173 = CARTESIAN_POINT('',(9.,-7.89,0.4)); +#36174 = LINE('',#36175,#36176); +#36175 = CARTESIAN_POINT('',(9.,-7.89,0.4)); +#36176 = VECTOR('',#36177,1.); +#36177 = DIRECTION('',(0.,0.,-1.)); +#36178 = ORIENTED_EDGE('',*,*,#36179,.F.); +#36179 = EDGE_CURVE('',#36180,#36172,#36182,.T.); +#36180 = VERTEX_POINT('',#36181); +#36181 = CARTESIAN_POINT('',(9.000000214576,-7.89,0.799997854233)); +#36182 = LINE('',#36183,#36184); +#36183 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#36184 = VECTOR('',#36185,1.); +#36185 = DIRECTION('',(0.,0.,-1.)); +#36186 = ORIENTED_EDGE('',*,*,#36187,.F.); +#36187 = EDGE_CURVE('',#33189,#36180,#36188,.T.); +#36188 = LINE('',#36189,#36190); +#36189 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#36190 = VECTOR('',#36191,1.); +#36191 = DIRECTION('',(0.,0.,-1.)); +#36192 = ORIENTED_EDGE('',*,*,#33188,.T.); +#36193 = ORIENTED_EDGE('',*,*,#36194,.T.); +#36194 = EDGE_CURVE('',#33181,#36195,#36197,.T.); +#36195 = VERTEX_POINT('',#36196); +#36196 = CARTESIAN_POINT('',(9.000000214576,-8.26,0.799997854233)); +#36197 = LINE('',#36198,#36199); +#36198 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#36199 = VECTOR('',#36200,1.); +#36200 = DIRECTION('',(0.,0.,-1.)); +#36201 = ORIENTED_EDGE('',*,*,#36202,.T.); +#36202 = EDGE_CURVE('',#36195,#36203,#36205,.T.); +#36203 = VERTEX_POINT('',#36204); +#36204 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#36205 = LINE('',#36206,#36207); +#36206 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#36207 = VECTOR('',#36208,1.); +#36208 = DIRECTION('',(0.,0.,-1.)); +#36209 = ORIENTED_EDGE('',*,*,#36210,.T.); +#36210 = EDGE_CURVE('',#36203,#31466,#36211,.T.); +#36211 = LINE('',#36212,#36213); +#36212 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#36213 = VECTOR('',#36214,1.); +#36214 = DIRECTION('',(0.,0.,-1.)); +#36215 = PLANE('',#36216); +#36216 = AXIS2_PLACEMENT_3D('',#36217,#36218,#36219); +#36217 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36218 = DIRECTION('',(1.,0.,0.)); +#36219 = DIRECTION('',(0.,-1.,0.)); +#36220 = ADVANCED_FACE('',(#36221),#36251,.F.); +#36221 = FACE_BOUND('',#36222,.T.); +#36222 = EDGE_LOOP('',(#36223,#36234,#36240,#36241,#36242,#36243,#36244, + #36245)); +#36223 = ORIENTED_EDGE('',*,*,#36224,.T.); +#36224 = EDGE_CURVE('',#36225,#36227,#36229,.T.); +#36225 = VERTEX_POINT('',#36226); +#36226 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#36227 = VERTEX_POINT('',#36228); +#36228 = CARTESIAN_POINT('',(-9.,-8.435,0.)); +#36229 = CIRCLE('',#36230,0.275); +#36230 = AXIS2_PLACEMENT_3D('',#36231,#36232,#36233); +#36231 = CARTESIAN_POINT('',(-9.,-8.71,0.)); +#36232 = DIRECTION('',(0.,0.,1.)); +#36233 = DIRECTION('',(1.,0.,-0.)); +#36234 = ORIENTED_EDGE('',*,*,#36235,.F.); +#36235 = EDGE_CURVE('',#30690,#36227,#36236,.T.); +#36236 = LINE('',#36237,#36238); +#36237 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#36238 = VECTOR('',#36239,1.); +#36239 = DIRECTION('',(0.,-1.,0.)); +#36240 = ORIENTED_EDGE('',*,*,#30697,.T.); +#36241 = ORIENTED_EDGE('',*,*,#30705,.T.); +#36242 = ORIENTED_EDGE('',*,*,#30713,.T.); +#36243 = ORIENTED_EDGE('',*,*,#30721,.F.); +#36244 = ORIENTED_EDGE('',*,*,#30729,.T.); +#36245 = ORIENTED_EDGE('',*,*,#36246,.F.); +#36246 = EDGE_CURVE('',#36225,#30730,#36247,.T.); +#36247 = LINE('',#36248,#36249); +#36248 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#36249 = VECTOR('',#36250,1.); +#36250 = DIRECTION('',(0.,-1.,0.)); +#36251 = PLANE('',#36252); +#36252 = AXIS2_PLACEMENT_3D('',#36253,#36254,#36255); +#36253 = CARTESIAN_POINT('',(-8.571261896074,-8.71,0.)); +#36254 = DIRECTION('',(0.,0.,1.)); +#36255 = DIRECTION('',(1.,0.,-0.)); +#36256 = ADVANCED_FACE('',(#36257),#36283,.T.); +#36257 = FACE_BOUND('',#36258,.F.); +#36258 = EDGE_LOOP('',(#36259,#36269,#36275,#36276,#36277)); +#36259 = ORIENTED_EDGE('',*,*,#36260,.F.); +#36260 = EDGE_CURVE('',#36261,#36263,#36265,.T.); +#36261 = VERTEX_POINT('',#36262); +#36262 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.145767343E-06)); +#36263 = VERTEX_POINT('',#36264); +#36264 = CARTESIAN_POINT('',(8.150000023842,-8.26,-1.943111538E-06)); +#36265 = LINE('',#36266,#36267); +#36266 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#36267 = VECTOR('',#36268,1.); +#36268 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36269 = ORIENTED_EDGE('',*,*,#36270,.T.); +#36270 = EDGE_CURVE('',#36261,#31466,#36271,.T.); +#36271 = LINE('',#36272,#36273); +#36272 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#36273 = VECTOR('',#36274,1.); +#36274 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36275 = ORIENTED_EDGE('',*,*,#31465,.T.); +#36276 = ORIENTED_EDGE('',*,*,#31457,.T.); +#36277 = ORIENTED_EDGE('',*,*,#36278,.F.); +#36278 = EDGE_CURVE('',#36263,#31450,#36279,.T.); +#36279 = LINE('',#36280,#36281); +#36280 = CARTESIAN_POINT('',(8.150000023842,-8.26,-1.94311153833E-06)); +#36281 = VECTOR('',#36282,1.); +#36282 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36283 = PLANE('',#36284); +#36284 = AXIS2_PLACEMENT_3D('',#36285,#36286,#36287); +#36285 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#36286 = DIRECTION('',(0.,1.,0.)); +#36287 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36288 = ADVANCED_FACE('',(#36289),#36307,.T.); +#36289 = FACE_BOUND('',#36290,.F.); +#36290 = EDGE_LOOP('',(#36291,#36299,#36300,#36301)); +#36291 = ORIENTED_EDGE('',*,*,#36292,.F.); +#36292 = EDGE_CURVE('',#36263,#36293,#36295,.T.); +#36293 = VERTEX_POINT('',#36294); +#36294 = CARTESIAN_POINT('',(8.150000023842,-9.16,-1.943111538E-06)); +#36295 = LINE('',#36296,#36297); +#36296 = CARTESIAN_POINT('',(8.150000023842,-8.26,-1.94311153833E-06)); +#36297 = VECTOR('',#36298,1.); +#36298 = DIRECTION('',(0.,-1.,0.)); +#36299 = ORIENTED_EDGE('',*,*,#36278,.T.); +#36300 = ORIENTED_EDGE('',*,*,#31449,.T.); +#36301 = ORIENTED_EDGE('',*,*,#36302,.F.); +#36302 = EDGE_CURVE('',#36293,#31442,#36303,.T.); +#36303 = LINE('',#36304,#36305); +#36304 = CARTESIAN_POINT('',(8.150000023842,-9.16,-1.94311153833E-06)); +#36305 = VECTOR('',#36306,1.); +#36306 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36307 = PLANE('',#36308); +#36308 = AXIS2_PLACEMENT_3D('',#36309,#36310,#36311); +#36309 = CARTESIAN_POINT('',(8.150000023842,-8.26,-1.94311153833E-06)); +#36310 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36311 = DIRECTION('',(0.,1.,0.)); +#36312 = ADVANCED_FACE('',(#36313),#36332,.T.); +#36313 = FACE_BOUND('',#36314,.F.); +#36314 = EDGE_LOOP('',(#36315,#36323,#36324,#36325,#36326)); +#36315 = ORIENTED_EDGE('',*,*,#36316,.F.); +#36316 = EDGE_CURVE('',#36293,#36317,#36319,.T.); +#36317 = VERTEX_POINT('',#36318); +#36318 = CARTESIAN_POINT('',(9.000000023842,-9.16,-2.145767343E-06)); +#36319 = LINE('',#36320,#36321); +#36320 = CARTESIAN_POINT('',(8.150000023842,-9.16,-1.94311153833E-06)); +#36321 = VECTOR('',#36322,1.); +#36322 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36323 = ORIENTED_EDGE('',*,*,#36302,.T.); +#36324 = ORIENTED_EDGE('',*,*,#31441,.F.); +#36325 = ORIENTED_EDGE('',*,*,#31433,.T.); +#36326 = ORIENTED_EDGE('',*,*,#36327,.F.); +#36327 = EDGE_CURVE('',#36317,#31426,#36328,.T.); +#36328 = LINE('',#36329,#36330); +#36329 = CARTESIAN_POINT('',(9.000000023842,-9.16,-2.14576734264E-06)); +#36330 = VECTOR('',#36331,1.); +#36331 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36332 = PLANE('',#36333); +#36333 = AXIS2_PLACEMENT_3D('',#36334,#36335,#36336); +#36334 = CARTESIAN_POINT('',(8.150000023842,-9.16,-1.94311153833E-06)); +#36335 = DIRECTION('',(0.,-1.,0.)); +#36336 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36337 = ADVANCED_FACE('',(#36338),#36370,.T.); +#36338 = FACE_BOUND('',#36339,.T.); +#36339 = EDGE_LOOP('',(#36340,#36341,#36349,#36355,#36356,#36364)); +#36340 = ORIENTED_EDGE('',*,*,#30737,.F.); +#36341 = ORIENTED_EDGE('',*,*,#36342,.F.); +#36342 = EDGE_CURVE('',#36343,#30738,#36345,.T.); +#36343 = VERTEX_POINT('',#36344); +#36344 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#36345 = LINE('',#36346,#36347); +#36346 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#36347 = VECTOR('',#36348,1.); +#36348 = DIRECTION('',(-0.,-0.,-1.)); +#36349 = ORIENTED_EDGE('',*,*,#36350,.F.); +#36350 = EDGE_CURVE('',#32693,#36343,#36351,.T.); +#36351 = LINE('',#36352,#36353); +#36352 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#36353 = VECTOR('',#36354,1.); +#36354 = DIRECTION('',(-0.,-0.,-1.)); +#36355 = ORIENTED_EDGE('',*,*,#32692,.T.); +#36356 = ORIENTED_EDGE('',*,*,#36357,.T.); +#36357 = EDGE_CURVE('',#32685,#36358,#36360,.T.); +#36358 = VERTEX_POINT('',#36359); +#36359 = CARTESIAN_POINT('',(-9.,-9.16,0.4)); +#36360 = LINE('',#36361,#36362); +#36361 = CARTESIAN_POINT('',(-9.,-9.16,0.8)); +#36362 = VECTOR('',#36363,1.); +#36363 = DIRECTION('',(-0.,-0.,-1.)); +#36364 = ORIENTED_EDGE('',*,*,#36365,.T.); +#36365 = EDGE_CURVE('',#36358,#30730,#36366,.T.); +#36366 = LINE('',#36367,#36368); +#36367 = CARTESIAN_POINT('',(-9.,-9.16,0.4)); +#36368 = VECTOR('',#36369,1.); +#36369 = DIRECTION('',(-0.,-0.,-1.)); +#36370 = PLANE('',#36371); +#36371 = AXIS2_PLACEMENT_3D('',#36372,#36373,#36374); +#36372 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#36373 = DIRECTION('',(-1.,0.,0.)); +#36374 = DIRECTION('',(0.,1.,0.)); +#36375 = ADVANCED_FACE('',(#36376),#36424,.T.); +#36376 = FACE_BOUND('',#36377,.T.); +#36377 = EDGE_LOOP('',(#36378,#36379,#36387,#36395,#36401,#36402,#36410, + #36418)); +#36378 = ORIENTED_EDGE('',*,*,#31425,.F.); +#36379 = ORIENTED_EDGE('',*,*,#36380,.F.); +#36380 = EDGE_CURVE('',#36381,#31426,#36383,.T.); +#36381 = VERTEX_POINT('',#36382); +#36382 = CARTESIAN_POINT('',(9.,-9.16,0.4)); +#36383 = LINE('',#36384,#36385); +#36384 = CARTESIAN_POINT('',(9.,-9.16,0.4)); +#36385 = VECTOR('',#36386,1.); +#36386 = DIRECTION('',(0.,0.,-1.)); +#36387 = ORIENTED_EDGE('',*,*,#36388,.F.); +#36388 = EDGE_CURVE('',#36389,#36381,#36391,.T.); +#36389 = VERTEX_POINT('',#36390); +#36390 = CARTESIAN_POINT('',(9.000000214576,-9.16,0.799997854233)); +#36391 = LINE('',#36392,#36393); +#36392 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#36393 = VECTOR('',#36394,1.); +#36394 = DIRECTION('',(0.,0.,-1.)); +#36395 = ORIENTED_EDGE('',*,*,#36396,.F.); +#36396 = EDGE_CURVE('',#33157,#36389,#36397,.T.); +#36397 = LINE('',#36398,#36399); +#36398 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#36399 = VECTOR('',#36400,1.); +#36400 = DIRECTION('',(0.,0.,-1.)); +#36401 = ORIENTED_EDGE('',*,*,#33156,.T.); +#36402 = ORIENTED_EDGE('',*,*,#36403,.T.); +#36403 = EDGE_CURVE('',#33149,#36404,#36406,.T.); +#36404 = VERTEX_POINT('',#36405); +#36405 = CARTESIAN_POINT('',(9.000000214576,-9.53,0.799997854233)); +#36406 = LINE('',#36407,#36408); +#36407 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#36408 = VECTOR('',#36409,1.); +#36409 = DIRECTION('',(0.,0.,-1.)); +#36410 = ORIENTED_EDGE('',*,*,#36411,.T.); +#36411 = EDGE_CURVE('',#36404,#36412,#36414,.T.); +#36412 = VERTEX_POINT('',#36413); +#36413 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#36414 = LINE('',#36415,#36416); +#36415 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#36416 = VECTOR('',#36417,1.); +#36417 = DIRECTION('',(0.,0.,-1.)); +#36418 = ORIENTED_EDGE('',*,*,#36419,.T.); +#36419 = EDGE_CURVE('',#36412,#31418,#36420,.T.); +#36420 = LINE('',#36421,#36422); +#36421 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#36422 = VECTOR('',#36423,1.); +#36423 = DIRECTION('',(0.,0.,-1.)); +#36424 = PLANE('',#36425); +#36425 = AXIS2_PLACEMENT_3D('',#36426,#36427,#36428); +#36426 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36427 = DIRECTION('',(1.,0.,0.)); +#36428 = DIRECTION('',(0.,-1.,0.)); +#36429 = ADVANCED_FACE('',(#36430),#36460,.F.); +#36430 = FACE_BOUND('',#36431,.T.); +#36431 = EDGE_LOOP('',(#36432,#36443,#36449,#36450,#36451,#36452,#36453, + #36454)); +#36432 = ORIENTED_EDGE('',*,*,#36433,.T.); +#36433 = EDGE_CURVE('',#36434,#36436,#36438,.T.); +#36434 = VERTEX_POINT('',#36435); +#36435 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#36436 = VERTEX_POINT('',#36437); +#36437 = CARTESIAN_POINT('',(-9.,-9.705,0.)); +#36438 = CIRCLE('',#36439,0.275); +#36439 = AXIS2_PLACEMENT_3D('',#36440,#36441,#36442); +#36440 = CARTESIAN_POINT('',(-9.,-9.98,0.)); +#36441 = DIRECTION('',(0.,0.,1.)); +#36442 = DIRECTION('',(1.,0.,-0.)); +#36443 = ORIENTED_EDGE('',*,*,#36444,.F.); +#36444 = EDGE_CURVE('',#30738,#36436,#36445,.T.); +#36445 = LINE('',#36446,#36447); +#36446 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#36447 = VECTOR('',#36448,1.); +#36448 = DIRECTION('',(0.,-1.,0.)); +#36449 = ORIENTED_EDGE('',*,*,#30745,.T.); +#36450 = ORIENTED_EDGE('',*,*,#30753,.T.); +#36451 = ORIENTED_EDGE('',*,*,#30761,.T.); +#36452 = ORIENTED_EDGE('',*,*,#30769,.F.); +#36453 = ORIENTED_EDGE('',*,*,#30777,.T.); +#36454 = ORIENTED_EDGE('',*,*,#36455,.F.); +#36455 = EDGE_CURVE('',#36434,#30778,#36456,.T.); +#36456 = LINE('',#36457,#36458); +#36457 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#36458 = VECTOR('',#36459,1.); +#36459 = DIRECTION('',(0.,-1.,0.)); +#36460 = PLANE('',#36461); +#36461 = AXIS2_PLACEMENT_3D('',#36462,#36463,#36464); +#36462 = CARTESIAN_POINT('',(-8.571261896074,-9.98,0.)); +#36463 = DIRECTION('',(0.,0.,1.)); +#36464 = DIRECTION('',(1.,0.,-0.)); +#36465 = ADVANCED_FACE('',(#36466),#36492,.T.); +#36466 = FACE_BOUND('',#36467,.F.); +#36467 = EDGE_LOOP('',(#36468,#36478,#36484,#36485,#36486)); +#36468 = ORIENTED_EDGE('',*,*,#36469,.F.); +#36469 = EDGE_CURVE('',#36470,#36472,#36474,.T.); +#36470 = VERTEX_POINT('',#36471); +#36471 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.145767343E-06)); +#36472 = VERTEX_POINT('',#36473); +#36473 = CARTESIAN_POINT('',(8.150000023842,-9.53,-1.943111538E-06)); +#36474 = LINE('',#36475,#36476); +#36475 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#36476 = VECTOR('',#36477,1.); +#36477 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36478 = ORIENTED_EDGE('',*,*,#36479,.T.); +#36479 = EDGE_CURVE('',#36470,#31418,#36480,.T.); +#36480 = LINE('',#36481,#36482); +#36481 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#36482 = VECTOR('',#36483,1.); +#36483 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36484 = ORIENTED_EDGE('',*,*,#31417,.T.); +#36485 = ORIENTED_EDGE('',*,*,#31409,.T.); +#36486 = ORIENTED_EDGE('',*,*,#36487,.F.); +#36487 = EDGE_CURVE('',#36472,#31402,#36488,.T.); +#36488 = LINE('',#36489,#36490); +#36489 = CARTESIAN_POINT('',(8.150000023842,-9.53,-1.94311153833E-06)); +#36490 = VECTOR('',#36491,1.); +#36491 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36492 = PLANE('',#36493); +#36493 = AXIS2_PLACEMENT_3D('',#36494,#36495,#36496); +#36494 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#36495 = DIRECTION('',(0.,1.,0.)); +#36496 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36497 = ADVANCED_FACE('',(#36498),#36516,.T.); +#36498 = FACE_BOUND('',#36499,.F.); +#36499 = EDGE_LOOP('',(#36500,#36508,#36509,#36510)); +#36500 = ORIENTED_EDGE('',*,*,#36501,.F.); +#36501 = EDGE_CURVE('',#36472,#36502,#36504,.T.); +#36502 = VERTEX_POINT('',#36503); +#36503 = CARTESIAN_POINT('',(8.150000023842,-10.43,-1.943111538E-06)); +#36504 = LINE('',#36505,#36506); +#36505 = CARTESIAN_POINT('',(8.150000023842,-9.53,-1.94311153833E-06)); +#36506 = VECTOR('',#36507,1.); +#36507 = DIRECTION('',(0.,-1.,0.)); +#36508 = ORIENTED_EDGE('',*,*,#36487,.T.); +#36509 = ORIENTED_EDGE('',*,*,#31401,.T.); +#36510 = ORIENTED_EDGE('',*,*,#36511,.F.); +#36511 = EDGE_CURVE('',#36502,#31394,#36512,.T.); +#36512 = LINE('',#36513,#36514); +#36513 = CARTESIAN_POINT('',(8.150000023842,-10.43,-1.94311153833E-06)); +#36514 = VECTOR('',#36515,1.); +#36515 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36516 = PLANE('',#36517); +#36517 = AXIS2_PLACEMENT_3D('',#36518,#36519,#36520); +#36518 = CARTESIAN_POINT('',(8.150000023842,-9.53,-1.94311153833E-06)); +#36519 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36520 = DIRECTION('',(0.,1.,0.)); +#36521 = ADVANCED_FACE('',(#36522),#36541,.T.); +#36522 = FACE_BOUND('',#36523,.F.); +#36523 = EDGE_LOOP('',(#36524,#36532,#36533,#36534,#36535)); +#36524 = ORIENTED_EDGE('',*,*,#36525,.F.); +#36525 = EDGE_CURVE('',#36502,#36526,#36528,.T.); +#36526 = VERTEX_POINT('',#36527); +#36527 = CARTESIAN_POINT('',(9.000000023842,-10.43,-2.145767343E-06)); +#36528 = LINE('',#36529,#36530); +#36529 = CARTESIAN_POINT('',(8.150000023842,-10.43,-1.94311153833E-06)); +#36530 = VECTOR('',#36531,1.); +#36531 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36532 = ORIENTED_EDGE('',*,*,#36511,.T.); +#36533 = ORIENTED_EDGE('',*,*,#31393,.F.); +#36534 = ORIENTED_EDGE('',*,*,#31385,.T.); +#36535 = ORIENTED_EDGE('',*,*,#36536,.F.); +#36536 = EDGE_CURVE('',#36526,#31378,#36537,.T.); +#36537 = LINE('',#36538,#36539); +#36538 = CARTESIAN_POINT('',(9.000000023842,-10.43,-2.14576734264E-06)); +#36539 = VECTOR('',#36540,1.); +#36540 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36541 = PLANE('',#36542); +#36542 = AXIS2_PLACEMENT_3D('',#36543,#36544,#36545); +#36543 = CARTESIAN_POINT('',(8.150000023842,-10.43,-1.94311153833E-06)); +#36544 = DIRECTION('',(0.,-1.,0.)); +#36545 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36546 = ADVANCED_FACE('',(#36547),#36579,.T.); +#36547 = FACE_BOUND('',#36548,.T.); +#36548 = EDGE_LOOP('',(#36549,#36550,#36558,#36564,#36565,#36573)); +#36549 = ORIENTED_EDGE('',*,*,#30785,.F.); +#36550 = ORIENTED_EDGE('',*,*,#36551,.F.); +#36551 = EDGE_CURVE('',#36552,#30786,#36554,.T.); +#36552 = VERTEX_POINT('',#36553); +#36553 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#36554 = LINE('',#36555,#36556); +#36555 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#36556 = VECTOR('',#36557,1.); +#36557 = DIRECTION('',(-0.,-0.,-1.)); +#36558 = ORIENTED_EDGE('',*,*,#36559,.F.); +#36559 = EDGE_CURVE('',#32725,#36552,#36560,.T.); +#36560 = LINE('',#36561,#36562); +#36561 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#36562 = VECTOR('',#36563,1.); +#36563 = DIRECTION('',(-0.,-0.,-1.)); +#36564 = ORIENTED_EDGE('',*,*,#32724,.T.); +#36565 = ORIENTED_EDGE('',*,*,#36566,.T.); +#36566 = EDGE_CURVE('',#32717,#36567,#36569,.T.); +#36567 = VERTEX_POINT('',#36568); +#36568 = CARTESIAN_POINT('',(-9.,-10.43,0.4)); +#36569 = LINE('',#36570,#36571); +#36570 = CARTESIAN_POINT('',(-9.,-10.43,0.8)); +#36571 = VECTOR('',#36572,1.); +#36572 = DIRECTION('',(-0.,-0.,-1.)); +#36573 = ORIENTED_EDGE('',*,*,#36574,.T.); +#36574 = EDGE_CURVE('',#36567,#30778,#36575,.T.); +#36575 = LINE('',#36576,#36577); +#36576 = CARTESIAN_POINT('',(-9.,-10.43,0.4)); +#36577 = VECTOR('',#36578,1.); +#36578 = DIRECTION('',(-0.,-0.,-1.)); +#36579 = PLANE('',#36580); +#36580 = AXIS2_PLACEMENT_3D('',#36581,#36582,#36583); +#36581 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#36582 = DIRECTION('',(-1.,0.,0.)); +#36583 = DIRECTION('',(0.,1.,0.)); +#36584 = ADVANCED_FACE('',(#36585),#36633,.T.); +#36585 = FACE_BOUND('',#36586,.T.); +#36586 = EDGE_LOOP('',(#36587,#36588,#36596,#36604,#36610,#36611,#36619, + #36627)); +#36587 = ORIENTED_EDGE('',*,*,#31377,.F.); +#36588 = ORIENTED_EDGE('',*,*,#36589,.F.); +#36589 = EDGE_CURVE('',#36590,#31378,#36592,.T.); +#36590 = VERTEX_POINT('',#36591); +#36591 = CARTESIAN_POINT('',(9.,-10.43,0.4)); +#36592 = LINE('',#36593,#36594); +#36593 = CARTESIAN_POINT('',(9.,-10.43,0.4)); +#36594 = VECTOR('',#36595,1.); +#36595 = DIRECTION('',(0.,0.,-1.)); +#36596 = ORIENTED_EDGE('',*,*,#36597,.F.); +#36597 = EDGE_CURVE('',#36598,#36590,#36600,.T.); +#36598 = VERTEX_POINT('',#36599); +#36599 = CARTESIAN_POINT('',(9.000000214576,-10.43,0.799997854233)); +#36600 = LINE('',#36601,#36602); +#36601 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#36602 = VECTOR('',#36603,1.); +#36603 = DIRECTION('',(0.,0.,-1.)); +#36604 = ORIENTED_EDGE('',*,*,#36605,.F.); +#36605 = EDGE_CURVE('',#33125,#36598,#36606,.T.); +#36606 = LINE('',#36607,#36608); +#36607 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#36608 = VECTOR('',#36609,1.); +#36609 = DIRECTION('',(0.,0.,-1.)); +#36610 = ORIENTED_EDGE('',*,*,#33124,.T.); +#36611 = ORIENTED_EDGE('',*,*,#36612,.T.); +#36612 = EDGE_CURVE('',#33117,#36613,#36615,.T.); +#36613 = VERTEX_POINT('',#36614); +#36614 = CARTESIAN_POINT('',(9.000000214576,-10.8,0.799997854233)); +#36615 = LINE('',#36616,#36617); +#36616 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#36617 = VECTOR('',#36618,1.); +#36618 = DIRECTION('',(0.,0.,-1.)); +#36619 = ORIENTED_EDGE('',*,*,#36620,.T.); +#36620 = EDGE_CURVE('',#36613,#36621,#36623,.T.); +#36621 = VERTEX_POINT('',#36622); +#36622 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#36623 = LINE('',#36624,#36625); +#36624 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#36625 = VECTOR('',#36626,1.); +#36626 = DIRECTION('',(0.,0.,-1.)); +#36627 = ORIENTED_EDGE('',*,*,#36628,.T.); +#36628 = EDGE_CURVE('',#36621,#31370,#36629,.T.); +#36629 = LINE('',#36630,#36631); +#36630 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#36631 = VECTOR('',#36632,1.); +#36632 = DIRECTION('',(0.,0.,-1.)); +#36633 = PLANE('',#36634); +#36634 = AXIS2_PLACEMENT_3D('',#36635,#36636,#36637); +#36635 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36636 = DIRECTION('',(1.,0.,0.)); +#36637 = DIRECTION('',(0.,-1.,0.)); +#36638 = ADVANCED_FACE('',(#36639),#36669,.F.); +#36639 = FACE_BOUND('',#36640,.T.); +#36640 = EDGE_LOOP('',(#36641,#36652,#36658,#36659,#36660,#36661,#36662, + #36663)); +#36641 = ORIENTED_EDGE('',*,*,#36642,.T.); +#36642 = EDGE_CURVE('',#36643,#36645,#36647,.T.); +#36643 = VERTEX_POINT('',#36644); +#36644 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#36645 = VERTEX_POINT('',#36646); +#36646 = CARTESIAN_POINT('',(-9.,-10.975,0.)); +#36647 = CIRCLE('',#36648,0.275); +#36648 = AXIS2_PLACEMENT_3D('',#36649,#36650,#36651); +#36649 = CARTESIAN_POINT('',(-9.,-11.25,0.)); +#36650 = DIRECTION('',(0.,0.,1.)); +#36651 = DIRECTION('',(1.,0.,-0.)); +#36652 = ORIENTED_EDGE('',*,*,#36653,.F.); +#36653 = EDGE_CURVE('',#30786,#36645,#36654,.T.); +#36654 = LINE('',#36655,#36656); +#36655 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#36656 = VECTOR('',#36657,1.); +#36657 = DIRECTION('',(0.,-1.,0.)); +#36658 = ORIENTED_EDGE('',*,*,#30793,.T.); +#36659 = ORIENTED_EDGE('',*,*,#30801,.T.); +#36660 = ORIENTED_EDGE('',*,*,#30809,.T.); +#36661 = ORIENTED_EDGE('',*,*,#30817,.F.); +#36662 = ORIENTED_EDGE('',*,*,#30825,.T.); +#36663 = ORIENTED_EDGE('',*,*,#36664,.F.); +#36664 = EDGE_CURVE('',#36643,#30826,#36665,.T.); +#36665 = LINE('',#36666,#36667); +#36666 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#36667 = VECTOR('',#36668,1.); +#36668 = DIRECTION('',(0.,-1.,0.)); +#36669 = PLANE('',#36670); +#36670 = AXIS2_PLACEMENT_3D('',#36671,#36672,#36673); +#36671 = CARTESIAN_POINT('',(-8.571261896074,-11.25,0.)); +#36672 = DIRECTION('',(0.,0.,1.)); +#36673 = DIRECTION('',(1.,0.,-0.)); +#36674 = ADVANCED_FACE('',(#36675),#36701,.T.); +#36675 = FACE_BOUND('',#36676,.F.); +#36676 = EDGE_LOOP('',(#36677,#36687,#36693,#36694,#36695)); +#36677 = ORIENTED_EDGE('',*,*,#36678,.F.); +#36678 = EDGE_CURVE('',#36679,#36681,#36683,.T.); +#36679 = VERTEX_POINT('',#36680); +#36680 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.145767343E-06)); +#36681 = VERTEX_POINT('',#36682); +#36682 = CARTESIAN_POINT('',(8.150000023842,-10.8,-1.943111538E-06)); +#36683 = LINE('',#36684,#36685); +#36684 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#36685 = VECTOR('',#36686,1.); +#36686 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36687 = ORIENTED_EDGE('',*,*,#36688,.T.); +#36688 = EDGE_CURVE('',#36679,#31370,#36689,.T.); +#36689 = LINE('',#36690,#36691); +#36690 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#36691 = VECTOR('',#36692,1.); +#36692 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36693 = ORIENTED_EDGE('',*,*,#31369,.T.); +#36694 = ORIENTED_EDGE('',*,*,#31361,.T.); +#36695 = ORIENTED_EDGE('',*,*,#36696,.F.); +#36696 = EDGE_CURVE('',#36681,#31354,#36697,.T.); +#36697 = LINE('',#36698,#36699); +#36698 = CARTESIAN_POINT('',(8.150000023842,-10.8,-1.94311153833E-06)); +#36699 = VECTOR('',#36700,1.); +#36700 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36701 = PLANE('',#36702); +#36702 = AXIS2_PLACEMENT_3D('',#36703,#36704,#36705); +#36703 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#36704 = DIRECTION('',(0.,1.,0.)); +#36705 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36706 = ADVANCED_FACE('',(#36707),#36725,.T.); +#36707 = FACE_BOUND('',#36708,.F.); +#36708 = EDGE_LOOP('',(#36709,#36717,#36718,#36719)); +#36709 = ORIENTED_EDGE('',*,*,#36710,.F.); +#36710 = EDGE_CURVE('',#36681,#36711,#36713,.T.); +#36711 = VERTEX_POINT('',#36712); +#36712 = CARTESIAN_POINT('',(8.150000023842,-11.7,-1.943111538E-06)); +#36713 = LINE('',#36714,#36715); +#36714 = CARTESIAN_POINT('',(8.150000023842,-10.8,-1.94311153833E-06)); +#36715 = VECTOR('',#36716,1.); +#36716 = DIRECTION('',(0.,-1.,0.)); +#36717 = ORIENTED_EDGE('',*,*,#36696,.T.); +#36718 = ORIENTED_EDGE('',*,*,#31353,.T.); +#36719 = ORIENTED_EDGE('',*,*,#36720,.F.); +#36720 = EDGE_CURVE('',#36711,#31346,#36721,.T.); +#36721 = LINE('',#36722,#36723); +#36722 = CARTESIAN_POINT('',(8.150000023842,-11.7,-1.94311153833E-06)); +#36723 = VECTOR('',#36724,1.); +#36724 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36725 = PLANE('',#36726); +#36726 = AXIS2_PLACEMENT_3D('',#36727,#36728,#36729); +#36727 = CARTESIAN_POINT('',(8.150000023842,-10.8,-1.94311153833E-06)); +#36728 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36729 = DIRECTION('',(0.,1.,0.)); +#36730 = ADVANCED_FACE('',(#36731),#36750,.T.); +#36731 = FACE_BOUND('',#36732,.F.); +#36732 = EDGE_LOOP('',(#36733,#36741,#36742,#36743,#36744)); +#36733 = ORIENTED_EDGE('',*,*,#36734,.F.); +#36734 = EDGE_CURVE('',#36711,#36735,#36737,.T.); +#36735 = VERTEX_POINT('',#36736); +#36736 = CARTESIAN_POINT('',(9.000000023842,-11.7,-2.145767343E-06)); +#36737 = LINE('',#36738,#36739); +#36738 = CARTESIAN_POINT('',(8.150000023842,-11.7,-1.94311153833E-06)); +#36739 = VECTOR('',#36740,1.); +#36740 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#36741 = ORIENTED_EDGE('',*,*,#36720,.T.); +#36742 = ORIENTED_EDGE('',*,*,#31345,.F.); +#36743 = ORIENTED_EDGE('',*,*,#31337,.T.); +#36744 = ORIENTED_EDGE('',*,*,#36745,.F.); +#36745 = EDGE_CURVE('',#36735,#31330,#36746,.T.); +#36746 = LINE('',#36747,#36748); +#36747 = CARTESIAN_POINT('',(9.000000023842,-11.7,-2.14576734264E-06)); +#36748 = VECTOR('',#36749,1.); +#36749 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#36750 = PLANE('',#36751); +#36751 = AXIS2_PLACEMENT_3D('',#36752,#36753,#36754); +#36752 = CARTESIAN_POINT('',(8.150000023842,-11.7,-1.94311153833E-06)); +#36753 = DIRECTION('',(0.,-1.,0.)); +#36754 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#36755 = ADVANCED_FACE('',(#36756),#36780,.T.); +#36756 = FACE_BOUND('',#36757,.T.); +#36757 = EDGE_LOOP('',(#36758,#36759,#36765,#36766,#36774)); +#36758 = ORIENTED_EDGE('',*,*,#30833,.F.); +#36759 = ORIENTED_EDGE('',*,*,#36760,.T.); +#36760 = EDGE_CURVE('',#30834,#32757,#36761,.T.); +#36761 = LINE('',#36762,#36763); +#36762 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#36763 = VECTOR('',#36764,1.); +#36764 = DIRECTION('',(0.,0.,1.)); +#36765 = ORIENTED_EDGE('',*,*,#32756,.T.); +#36766 = ORIENTED_EDGE('',*,*,#36767,.T.); +#36767 = EDGE_CURVE('',#32749,#36768,#36770,.T.); +#36768 = VERTEX_POINT('',#36769); +#36769 = CARTESIAN_POINT('',(-9.,-11.7,0.4)); +#36770 = LINE('',#36771,#36772); +#36771 = CARTESIAN_POINT('',(-9.,-11.7,0.8)); +#36772 = VECTOR('',#36773,1.); +#36773 = DIRECTION('',(-0.,-0.,-1.)); +#36774 = ORIENTED_EDGE('',*,*,#36775,.T.); +#36775 = EDGE_CURVE('',#36768,#30826,#36776,.T.); +#36776 = LINE('',#36777,#36778); +#36777 = CARTESIAN_POINT('',(-9.,-11.7,0.4)); +#36778 = VECTOR('',#36779,1.); +#36779 = DIRECTION('',(-0.,-0.,-1.)); +#36780 = PLANE('',#36781); +#36781 = AXIS2_PLACEMENT_3D('',#36782,#36783,#36784); +#36782 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#36783 = DIRECTION('',(-1.,0.,0.)); +#36784 = DIRECTION('',(0.,1.,0.)); +#36785 = ADVANCED_FACE('',(#36786),#36818,.T.); +#36786 = FACE_BOUND('',#36787,.T.); +#36787 = EDGE_LOOP('',(#36788,#36789,#36797,#36805,#36811,#36812)); +#36788 = ORIENTED_EDGE('',*,*,#31329,.F.); +#36789 = ORIENTED_EDGE('',*,*,#36790,.F.); +#36790 = EDGE_CURVE('',#36791,#31330,#36793,.T.); +#36791 = VERTEX_POINT('',#36792); +#36792 = CARTESIAN_POINT('',(9.,-11.7,0.4)); +#36793 = LINE('',#36794,#36795); +#36794 = CARTESIAN_POINT('',(9.,-11.7,0.4)); +#36795 = VECTOR('',#36796,1.); +#36796 = DIRECTION('',(0.,0.,-1.)); +#36797 = ORIENTED_EDGE('',*,*,#36798,.F.); +#36798 = EDGE_CURVE('',#36799,#36791,#36801,.T.); +#36799 = VERTEX_POINT('',#36800); +#36800 = CARTESIAN_POINT('',(9.000000214576,-11.7,0.799997854233)); +#36801 = LINE('',#36802,#36803); +#36802 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#36803 = VECTOR('',#36804,1.); +#36804 = DIRECTION('',(0.,0.,-1.)); +#36805 = ORIENTED_EDGE('',*,*,#36806,.F.); +#36806 = EDGE_CURVE('',#33093,#36799,#36807,.T.); +#36807 = LINE('',#36808,#36809); +#36808 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#36809 = VECTOR('',#36810,1.); +#36810 = DIRECTION('',(0.,0.,-1.)); +#36811 = ORIENTED_EDGE('',*,*,#33092,.T.); +#36812 = ORIENTED_EDGE('',*,*,#36813,.F.); +#36813 = EDGE_CURVE('',#31322,#33085,#36814,.T.); +#36814 = LINE('',#36815,#36816); +#36815 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#36816 = VECTOR('',#36817,1.); +#36817 = DIRECTION('',(0.,0.,1.)); +#36818 = PLANE('',#36819); +#36819 = AXIS2_PLACEMENT_3D('',#36820,#36821,#36822); +#36820 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36821 = DIRECTION('',(1.,0.,0.)); +#36822 = DIRECTION('',(0.,-1.,0.)); +#36823 = ADVANCED_FACE('',(#36824),#36843,.T.); +#36824 = FACE_BOUND('',#36825,.T.); +#36825 = EDGE_LOOP('',(#36826,#36827,#36835,#36841,#36842)); +#36826 = ORIENTED_EDGE('',*,*,#30841,.F.); +#36827 = ORIENTED_EDGE('',*,*,#36828,.F.); +#36828 = EDGE_CURVE('',#36829,#30842,#36831,.T.); +#36829 = VERTEX_POINT('',#36830); +#36830 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#36831 = LINE('',#36832,#36833); +#36832 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#36833 = VECTOR('',#36834,1.); +#36834 = DIRECTION('',(-0.,-0.,-1.)); +#36835 = ORIENTED_EDGE('',*,*,#36836,.F.); +#36836 = EDGE_CURVE('',#32765,#36829,#36837,.T.); +#36837 = LINE('',#36838,#36839); +#36838 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#36839 = VECTOR('',#36840,1.); +#36840 = DIRECTION('',(-0.,-0.,-1.)); +#36841 = ORIENTED_EDGE('',*,*,#32764,.T.); +#36842 = ORIENTED_EDGE('',*,*,#36760,.F.); +#36843 = PLANE('',#36844); +#36844 = AXIS2_PLACEMENT_3D('',#36845,#36846,#36847); +#36845 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#36846 = DIRECTION('',(0.,-1.,0.)); +#36847 = DIRECTION('',(-1.,0.,0.)); +#36848 = ADVANCED_FACE('',(#36849),#36868,.T.); +#36849 = FACE_BOUND('',#36850,.T.); +#36850 = EDGE_LOOP('',(#36851,#36852,#36853,#36854,#36862)); +#36851 = ORIENTED_EDGE('',*,*,#31321,.F.); +#36852 = ORIENTED_EDGE('',*,*,#36813,.T.); +#36853 = ORIENTED_EDGE('',*,*,#33084,.T.); +#36854 = ORIENTED_EDGE('',*,*,#36855,.T.); +#36855 = EDGE_CURVE('',#33077,#36856,#36858,.T.); +#36856 = VERTEX_POINT('',#36857); +#36857 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#36858 = LINE('',#36859,#36860); +#36859 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#36860 = VECTOR('',#36861,1.); +#36861 = DIRECTION('',(0.,0.,-1.)); +#36862 = ORIENTED_EDGE('',*,*,#36863,.T.); +#36863 = EDGE_CURVE('',#36856,#31314,#36864,.T.); +#36864 = LINE('',#36865,#36866); +#36865 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#36866 = VECTOR('',#36867,1.); +#36867 = DIRECTION('',(0.,0.,-1.)); +#36868 = PLANE('',#36869); +#36869 = AXIS2_PLACEMENT_3D('',#36870,#36871,#36872); +#36870 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#36871 = DIRECTION('',(0.,-1.,0.)); +#36872 = DIRECTION('',(-1.,0.,0.)); +#36873 = ADVANCED_FACE('',(#36874),#36904,.F.); +#36874 = FACE_BOUND('',#36875,.T.); +#36875 = EDGE_LOOP('',(#36876,#36887,#36893,#36894,#36895,#36896,#36897, + #36898)); +#36876 = ORIENTED_EDGE('',*,*,#36877,.T.); +#36877 = EDGE_CURVE('',#36878,#36880,#36882,.T.); +#36878 = VERTEX_POINT('',#36879); +#36879 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#36880 = VERTEX_POINT('',#36881); +#36881 = CARTESIAN_POINT('',(-5.99,-12.75,0.)); +#36882 = CIRCLE('',#36883,0.275); +#36883 = AXIS2_PLACEMENT_3D('',#36884,#36885,#36886); +#36884 = CARTESIAN_POINT('',(-5.715,-12.75,0.)); +#36885 = DIRECTION('',(0.,-0.,1.)); +#36886 = DIRECTION('',(0.,1.,0.)); +#36887 = ORIENTED_EDGE('',*,*,#36888,.F.); +#36888 = EDGE_CURVE('',#30842,#36880,#36889,.T.); +#36889 = LINE('',#36890,#36891); +#36890 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#36891 = VECTOR('',#36892,1.); +#36892 = DIRECTION('',(1.,0.,0.)); +#36893 = ORIENTED_EDGE('',*,*,#30849,.T.); +#36894 = ORIENTED_EDGE('',*,*,#30857,.T.); +#36895 = ORIENTED_EDGE('',*,*,#30865,.T.); +#36896 = ORIENTED_EDGE('',*,*,#30873,.F.); +#36897 = ORIENTED_EDGE('',*,*,#30881,.T.); +#36898 = ORIENTED_EDGE('',*,*,#36899,.F.); +#36899 = EDGE_CURVE('',#36878,#30882,#36900,.T.); +#36900 = LINE('',#36901,#36902); +#36901 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#36902 = VECTOR('',#36903,1.); +#36903 = DIRECTION('',(1.,0.,0.)); +#36904 = PLANE('',#36905); +#36905 = AXIS2_PLACEMENT_3D('',#36906,#36907,#36908); +#36906 = CARTESIAN_POINT('',(-5.715,-12.32126189607,0.)); +#36907 = DIRECTION('',(0.,0.,1.)); +#36908 = DIRECTION('',(0.,1.,0.)); +#36909 = ADVANCED_FACE('',(#36910),#36940,.F.); +#36910 = FACE_BOUND('',#36911,.T.); +#36911 = EDGE_LOOP('',(#36912,#36923,#36929,#36930,#36931,#36932,#36933, + #36934)); +#36912 = ORIENTED_EDGE('',*,*,#36913,.T.); +#36913 = EDGE_CURVE('',#36914,#36916,#36918,.T.); +#36914 = VERTEX_POINT('',#36915); +#36915 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#36916 = VERTEX_POINT('',#36917); +#36917 = CARTESIAN_POINT('',(5.44,-12.75,0.)); +#36918 = CIRCLE('',#36919,0.275); +#36919 = AXIS2_PLACEMENT_3D('',#36920,#36921,#36922); +#36920 = CARTESIAN_POINT('',(5.715,-12.75,0.)); +#36921 = DIRECTION('',(0.,-0.,1.)); +#36922 = DIRECTION('',(0.,1.,0.)); +#36923 = ORIENTED_EDGE('',*,*,#36924,.F.); +#36924 = EDGE_CURVE('',#31274,#36916,#36925,.T.); +#36925 = LINE('',#36926,#36927); +#36926 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#36927 = VECTOR('',#36928,1.); +#36928 = DIRECTION('',(1.,0.,0.)); +#36929 = ORIENTED_EDGE('',*,*,#31281,.F.); +#36930 = ORIENTED_EDGE('',*,*,#31289,.T.); +#36931 = ORIENTED_EDGE('',*,*,#31297,.F.); +#36932 = ORIENTED_EDGE('',*,*,#31305,.F.); +#36933 = ORIENTED_EDGE('',*,*,#31313,.F.); +#36934 = ORIENTED_EDGE('',*,*,#36935,.F.); +#36935 = EDGE_CURVE('',#36914,#31314,#36936,.T.); +#36936 = LINE('',#36937,#36938); +#36937 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#36938 = VECTOR('',#36939,1.); +#36939 = DIRECTION('',(1.,0.,0.)); +#36940 = PLANE('',#36941); +#36941 = AXIS2_PLACEMENT_3D('',#36942,#36943,#36944); +#36942 = CARTESIAN_POINT('',(5.715,-12.32126189607,0.)); +#36943 = DIRECTION('',(0.,0.,1.)); +#36944 = DIRECTION('',(0.,1.,0.)); +#36945 = ADVANCED_FACE('',(#36946),#36978,.T.); +#36946 = FACE_BOUND('',#36947,.T.); +#36947 = EDGE_LOOP('',(#36948,#36949,#36957,#36963,#36964,#36972)); +#36948 = ORIENTED_EDGE('',*,*,#30889,.F.); +#36949 = ORIENTED_EDGE('',*,*,#36950,.F.); +#36950 = EDGE_CURVE('',#36951,#30890,#36953,.T.); +#36951 = VERTEX_POINT('',#36952); +#36952 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#36953 = LINE('',#36954,#36955); +#36954 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#36955 = VECTOR('',#36956,1.); +#36956 = DIRECTION('',(-0.,-0.,-1.)); +#36957 = ORIENTED_EDGE('',*,*,#36958,.F.); +#36958 = EDGE_CURVE('',#32797,#36951,#36959,.T.); +#36959 = LINE('',#36960,#36961); +#36960 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#36961 = VECTOR('',#36962,1.); +#36962 = DIRECTION('',(-0.,-0.,-1.)); +#36963 = ORIENTED_EDGE('',*,*,#32796,.T.); +#36964 = ORIENTED_EDGE('',*,*,#36965,.T.); +#36965 = EDGE_CURVE('',#32789,#36966,#36968,.T.); +#36966 = VERTEX_POINT('',#36967); +#36967 = CARTESIAN_POINT('',(-5.265,-12.75,0.4)); +#36968 = LINE('',#36969,#36970); +#36969 = CARTESIAN_POINT('',(-5.265,-12.75,0.8)); +#36970 = VECTOR('',#36971,1.); +#36971 = DIRECTION('',(-0.,-0.,-1.)); +#36972 = ORIENTED_EDGE('',*,*,#36973,.T.); +#36973 = EDGE_CURVE('',#36966,#30882,#36974,.T.); +#36974 = LINE('',#36975,#36976); +#36975 = CARTESIAN_POINT('',(-5.265,-12.75,0.4)); +#36976 = VECTOR('',#36977,1.); +#36977 = DIRECTION('',(-0.,-0.,-1.)); +#36978 = PLANE('',#36979); +#36979 = AXIS2_PLACEMENT_3D('',#36980,#36981,#36982); +#36980 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#36981 = DIRECTION('',(0.,-1.,0.)); +#36982 = DIRECTION('',(-1.,0.,0.)); +#36983 = ADVANCED_FACE('',(#36984),#37016,.T.); +#36984 = FACE_BOUND('',#36985,.T.); +#36985 = EDGE_LOOP('',(#36986,#36987,#36995,#37001,#37002,#37010)); +#36986 = ORIENTED_EDGE('',*,*,#31273,.F.); +#36987 = ORIENTED_EDGE('',*,*,#36988,.F.); +#36988 = EDGE_CURVE('',#36989,#31274,#36991,.T.); +#36989 = VERTEX_POINT('',#36990); +#36990 = CARTESIAN_POINT('',(5.265,-12.75,0.4)); +#36991 = LINE('',#36992,#36993); +#36992 = CARTESIAN_POINT('',(5.265,-12.75,0.4)); +#36993 = VECTOR('',#36994,1.); +#36994 = DIRECTION('',(0.,0.,-1.)); +#36995 = ORIENTED_EDGE('',*,*,#36996,.F.); +#36996 = EDGE_CURVE('',#33053,#36989,#36997,.T.); +#36997 = LINE('',#36998,#36999); +#36998 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#36999 = VECTOR('',#37000,1.); +#37000 = DIRECTION('',(0.,0.,-1.)); +#37001 = ORIENTED_EDGE('',*,*,#33052,.T.); +#37002 = ORIENTED_EDGE('',*,*,#37003,.T.); +#37003 = EDGE_CURVE('',#33045,#37004,#37006,.T.); +#37004 = VERTEX_POINT('',#37005); +#37005 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#37006 = LINE('',#37007,#37008); +#37007 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#37008 = VECTOR('',#37009,1.); +#37009 = DIRECTION('',(0.,0.,-1.)); +#37010 = ORIENTED_EDGE('',*,*,#37011,.T.); +#37011 = EDGE_CURVE('',#37004,#31266,#37012,.T.); +#37012 = LINE('',#37013,#37014); +#37013 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#37014 = VECTOR('',#37015,1.); +#37015 = DIRECTION('',(0.,0.,-1.)); +#37016 = PLANE('',#37017); +#37017 = AXIS2_PLACEMENT_3D('',#37018,#37019,#37020); +#37018 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#37019 = DIRECTION('',(0.,-1.,0.)); +#37020 = DIRECTION('',(-1.,0.,0.)); +#37021 = ADVANCED_FACE('',(#37022),#37052,.F.); +#37022 = FACE_BOUND('',#37023,.T.); +#37023 = EDGE_LOOP('',(#37024,#37035,#37041,#37042,#37043,#37044,#37045, + #37046)); +#37024 = ORIENTED_EDGE('',*,*,#37025,.T.); +#37025 = EDGE_CURVE('',#37026,#37028,#37030,.T.); +#37026 = VERTEX_POINT('',#37027); +#37027 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#37028 = VERTEX_POINT('',#37029); +#37029 = CARTESIAN_POINT('',(-4.72,-12.75,0.)); +#37030 = CIRCLE('',#37031,0.275); +#37031 = AXIS2_PLACEMENT_3D('',#37032,#37033,#37034); +#37032 = CARTESIAN_POINT('',(-4.445,-12.75,0.)); +#37033 = DIRECTION('',(0.,-0.,1.)); +#37034 = DIRECTION('',(0.,1.,0.)); +#37035 = ORIENTED_EDGE('',*,*,#37036,.F.); +#37036 = EDGE_CURVE('',#30890,#37028,#37037,.T.); +#37037 = LINE('',#37038,#37039); +#37038 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#37039 = VECTOR('',#37040,1.); +#37040 = DIRECTION('',(1.,0.,0.)); +#37041 = ORIENTED_EDGE('',*,*,#30897,.T.); +#37042 = ORIENTED_EDGE('',*,*,#30905,.T.); +#37043 = ORIENTED_EDGE('',*,*,#30913,.T.); +#37044 = ORIENTED_EDGE('',*,*,#30921,.F.); +#37045 = ORIENTED_EDGE('',*,*,#30929,.T.); +#37046 = ORIENTED_EDGE('',*,*,#37047,.F.); +#37047 = EDGE_CURVE('',#37026,#30930,#37048,.T.); +#37048 = LINE('',#37049,#37050); +#37049 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#37050 = VECTOR('',#37051,1.); +#37051 = DIRECTION('',(1.,0.,0.)); +#37052 = PLANE('',#37053); +#37053 = AXIS2_PLACEMENT_3D('',#37054,#37055,#37056); +#37054 = CARTESIAN_POINT('',(-4.445,-12.32126189607,0.)); +#37055 = DIRECTION('',(0.,0.,1.)); +#37056 = DIRECTION('',(0.,1.,0.)); +#37057 = ADVANCED_FACE('',(#37058),#37088,.F.); +#37058 = FACE_BOUND('',#37059,.T.); +#37059 = EDGE_LOOP('',(#37060,#37071,#37077,#37078,#37079,#37080,#37081, + #37082)); +#37060 = ORIENTED_EDGE('',*,*,#37061,.T.); +#37061 = EDGE_CURVE('',#37062,#37064,#37066,.T.); +#37062 = VERTEX_POINT('',#37063); +#37063 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#37064 = VERTEX_POINT('',#37065); +#37065 = CARTESIAN_POINT('',(4.17,-12.75,0.)); +#37066 = CIRCLE('',#37067,0.275); +#37067 = AXIS2_PLACEMENT_3D('',#37068,#37069,#37070); +#37068 = CARTESIAN_POINT('',(4.445,-12.75,0.)); +#37069 = DIRECTION('',(0.,-0.,1.)); +#37070 = DIRECTION('',(0.,1.,0.)); +#37071 = ORIENTED_EDGE('',*,*,#37072,.F.); +#37072 = EDGE_CURVE('',#31226,#37064,#37073,.T.); +#37073 = LINE('',#37074,#37075); +#37074 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#37075 = VECTOR('',#37076,1.); +#37076 = DIRECTION('',(1.,0.,0.)); +#37077 = ORIENTED_EDGE('',*,*,#31233,.F.); +#37078 = ORIENTED_EDGE('',*,*,#31241,.T.); +#37079 = ORIENTED_EDGE('',*,*,#31249,.F.); +#37080 = ORIENTED_EDGE('',*,*,#31257,.F.); +#37081 = ORIENTED_EDGE('',*,*,#31265,.F.); +#37082 = ORIENTED_EDGE('',*,*,#37083,.F.); +#37083 = EDGE_CURVE('',#37062,#31266,#37084,.T.); +#37084 = LINE('',#37085,#37086); +#37085 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#37086 = VECTOR('',#37087,1.); +#37087 = DIRECTION('',(1.,0.,0.)); +#37088 = PLANE('',#37089); +#37089 = AXIS2_PLACEMENT_3D('',#37090,#37091,#37092); +#37090 = CARTESIAN_POINT('',(4.445,-12.32126189607,0.)); +#37091 = DIRECTION('',(0.,0.,1.)); +#37092 = DIRECTION('',(0.,1.,0.)); +#37093 = ADVANCED_FACE('',(#37094),#37126,.T.); +#37094 = FACE_BOUND('',#37095,.T.); +#37095 = EDGE_LOOP('',(#37096,#37097,#37105,#37111,#37112,#37120)); +#37096 = ORIENTED_EDGE('',*,*,#30937,.F.); +#37097 = ORIENTED_EDGE('',*,*,#37098,.F.); +#37098 = EDGE_CURVE('',#37099,#30938,#37101,.T.); +#37099 = VERTEX_POINT('',#37100); +#37100 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#37101 = LINE('',#37102,#37103); +#37102 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#37103 = VECTOR('',#37104,1.); +#37104 = DIRECTION('',(-0.,-0.,-1.)); +#37105 = ORIENTED_EDGE('',*,*,#37106,.F.); +#37106 = EDGE_CURVE('',#32829,#37099,#37107,.T.); +#37107 = LINE('',#37108,#37109); +#37108 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#37109 = VECTOR('',#37110,1.); +#37110 = DIRECTION('',(-0.,-0.,-1.)); +#37111 = ORIENTED_EDGE('',*,*,#32828,.T.); +#37112 = ORIENTED_EDGE('',*,*,#37113,.T.); +#37113 = EDGE_CURVE('',#32821,#37114,#37116,.T.); +#37114 = VERTEX_POINT('',#37115); +#37115 = CARTESIAN_POINT('',(-3.995,-12.75,0.4)); +#37116 = LINE('',#37117,#37118); +#37117 = CARTESIAN_POINT('',(-3.995,-12.75,0.8)); +#37118 = VECTOR('',#37119,1.); +#37119 = DIRECTION('',(-0.,-0.,-1.)); +#37120 = ORIENTED_EDGE('',*,*,#37121,.T.); +#37121 = EDGE_CURVE('',#37114,#30930,#37122,.T.); +#37122 = LINE('',#37123,#37124); +#37123 = CARTESIAN_POINT('',(-3.995,-12.75,0.4)); +#37124 = VECTOR('',#37125,1.); +#37125 = DIRECTION('',(-0.,-0.,-1.)); +#37126 = PLANE('',#37127); +#37127 = AXIS2_PLACEMENT_3D('',#37128,#37129,#37130); +#37128 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#37129 = DIRECTION('',(0.,-1.,0.)); +#37130 = DIRECTION('',(-1.,0.,0.)); +#37131 = ADVANCED_FACE('',(#37132),#37164,.T.); +#37132 = FACE_BOUND('',#37133,.T.); +#37133 = EDGE_LOOP('',(#37134,#37135,#37143,#37149,#37150,#37158)); +#37134 = ORIENTED_EDGE('',*,*,#31225,.F.); +#37135 = ORIENTED_EDGE('',*,*,#37136,.F.); +#37136 = EDGE_CURVE('',#37137,#31226,#37139,.T.); +#37137 = VERTEX_POINT('',#37138); +#37138 = CARTESIAN_POINT('',(3.995,-12.75,0.4)); +#37139 = LINE('',#37140,#37141); +#37140 = CARTESIAN_POINT('',(3.995,-12.75,0.4)); +#37141 = VECTOR('',#37142,1.); +#37142 = DIRECTION('',(0.,0.,-1.)); +#37143 = ORIENTED_EDGE('',*,*,#37144,.F.); +#37144 = EDGE_CURVE('',#33021,#37137,#37145,.T.); +#37145 = LINE('',#37146,#37147); +#37146 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#37147 = VECTOR('',#37148,1.); +#37148 = DIRECTION('',(0.,0.,-1.)); +#37149 = ORIENTED_EDGE('',*,*,#33020,.T.); +#37150 = ORIENTED_EDGE('',*,*,#37151,.T.); +#37151 = EDGE_CURVE('',#33013,#37152,#37154,.T.); +#37152 = VERTEX_POINT('',#37153); +#37153 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#37154 = LINE('',#37155,#37156); +#37155 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#37156 = VECTOR('',#37157,1.); +#37157 = DIRECTION('',(0.,0.,-1.)); +#37158 = ORIENTED_EDGE('',*,*,#37159,.T.); +#37159 = EDGE_CURVE('',#37152,#31218,#37160,.T.); +#37160 = LINE('',#37161,#37162); +#37161 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#37162 = VECTOR('',#37163,1.); +#37163 = DIRECTION('',(0.,0.,-1.)); +#37164 = PLANE('',#37165); +#37165 = AXIS2_PLACEMENT_3D('',#37166,#37167,#37168); +#37166 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#37167 = DIRECTION('',(0.,-1.,0.)); +#37168 = DIRECTION('',(-1.,0.,0.)); +#37169 = ADVANCED_FACE('',(#37170),#37200,.F.); +#37170 = FACE_BOUND('',#37171,.T.); +#37171 = EDGE_LOOP('',(#37172,#37183,#37189,#37190,#37191,#37192,#37193, + #37194)); +#37172 = ORIENTED_EDGE('',*,*,#37173,.T.); +#37173 = EDGE_CURVE('',#37174,#37176,#37178,.T.); +#37174 = VERTEX_POINT('',#37175); +#37175 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#37176 = VERTEX_POINT('',#37177); +#37177 = CARTESIAN_POINT('',(-3.45,-12.75,0.)); +#37178 = CIRCLE('',#37179,0.275); +#37179 = AXIS2_PLACEMENT_3D('',#37180,#37181,#37182); +#37180 = CARTESIAN_POINT('',(-3.175,-12.75,0.)); +#37181 = DIRECTION('',(0.,-0.,1.)); +#37182 = DIRECTION('',(0.,1.,0.)); +#37183 = ORIENTED_EDGE('',*,*,#37184,.F.); +#37184 = EDGE_CURVE('',#30938,#37176,#37185,.T.); +#37185 = LINE('',#37186,#37187); +#37186 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#37187 = VECTOR('',#37188,1.); +#37188 = DIRECTION('',(1.,0.,0.)); +#37189 = ORIENTED_EDGE('',*,*,#30945,.T.); +#37190 = ORIENTED_EDGE('',*,*,#30953,.T.); +#37191 = ORIENTED_EDGE('',*,*,#30961,.T.); +#37192 = ORIENTED_EDGE('',*,*,#30969,.F.); +#37193 = ORIENTED_EDGE('',*,*,#30977,.T.); +#37194 = ORIENTED_EDGE('',*,*,#37195,.F.); +#37195 = EDGE_CURVE('',#37174,#30978,#37196,.T.); +#37196 = LINE('',#37197,#37198); +#37197 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#37198 = VECTOR('',#37199,1.); +#37199 = DIRECTION('',(1.,0.,0.)); +#37200 = PLANE('',#37201); +#37201 = AXIS2_PLACEMENT_3D('',#37202,#37203,#37204); +#37202 = CARTESIAN_POINT('',(-3.175,-12.32126189607,0.)); +#37203 = DIRECTION('',(0.,0.,1.)); +#37204 = DIRECTION('',(0.,1.,0.)); +#37205 = ADVANCED_FACE('',(#37206),#37236,.F.); +#37206 = FACE_BOUND('',#37207,.T.); +#37207 = EDGE_LOOP('',(#37208,#37219,#37225,#37226,#37227,#37228,#37229, + #37230)); +#37208 = ORIENTED_EDGE('',*,*,#37209,.T.); +#37209 = EDGE_CURVE('',#37210,#37212,#37214,.T.); +#37210 = VERTEX_POINT('',#37211); +#37211 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#37212 = VERTEX_POINT('',#37213); +#37213 = CARTESIAN_POINT('',(2.9,-12.75,0.)); +#37214 = CIRCLE('',#37215,0.275); +#37215 = AXIS2_PLACEMENT_3D('',#37216,#37217,#37218); +#37216 = CARTESIAN_POINT('',(3.175,-12.75,0.)); +#37217 = DIRECTION('',(0.,-0.,1.)); +#37218 = DIRECTION('',(0.,1.,0.)); +#37219 = ORIENTED_EDGE('',*,*,#37220,.F.); +#37220 = EDGE_CURVE('',#31178,#37212,#37221,.T.); +#37221 = LINE('',#37222,#37223); +#37222 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#37223 = VECTOR('',#37224,1.); +#37224 = DIRECTION('',(1.,0.,0.)); +#37225 = ORIENTED_EDGE('',*,*,#31185,.F.); +#37226 = ORIENTED_EDGE('',*,*,#31193,.T.); +#37227 = ORIENTED_EDGE('',*,*,#31201,.F.); +#37228 = ORIENTED_EDGE('',*,*,#31209,.F.); +#37229 = ORIENTED_EDGE('',*,*,#31217,.F.); +#37230 = ORIENTED_EDGE('',*,*,#37231,.F.); +#37231 = EDGE_CURVE('',#37210,#31218,#37232,.T.); +#37232 = LINE('',#37233,#37234); +#37233 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#37234 = VECTOR('',#37235,1.); +#37235 = DIRECTION('',(1.,0.,0.)); +#37236 = PLANE('',#37237); +#37237 = AXIS2_PLACEMENT_3D('',#37238,#37239,#37240); +#37238 = CARTESIAN_POINT('',(3.175,-12.32126189607,0.)); +#37239 = DIRECTION('',(0.,0.,1.)); +#37240 = DIRECTION('',(0.,1.,0.)); +#37241 = ADVANCED_FACE('',(#37242),#37274,.T.); +#37242 = FACE_BOUND('',#37243,.T.); +#37243 = EDGE_LOOP('',(#37244,#37245,#37253,#37259,#37260,#37268)); +#37244 = ORIENTED_EDGE('',*,*,#30985,.F.); +#37245 = ORIENTED_EDGE('',*,*,#37246,.F.); +#37246 = EDGE_CURVE('',#37247,#30986,#37249,.T.); +#37247 = VERTEX_POINT('',#37248); +#37248 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#37249 = LINE('',#37250,#37251); +#37250 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#37251 = VECTOR('',#37252,1.); +#37252 = DIRECTION('',(-0.,-0.,-1.)); +#37253 = ORIENTED_EDGE('',*,*,#37254,.F.); +#37254 = EDGE_CURVE('',#32861,#37247,#37255,.T.); +#37255 = LINE('',#37256,#37257); +#37256 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#37257 = VECTOR('',#37258,1.); +#37258 = DIRECTION('',(-0.,-0.,-1.)); +#37259 = ORIENTED_EDGE('',*,*,#32860,.T.); +#37260 = ORIENTED_EDGE('',*,*,#37261,.T.); +#37261 = EDGE_CURVE('',#32853,#37262,#37264,.T.); +#37262 = VERTEX_POINT('',#37263); +#37263 = CARTESIAN_POINT('',(-2.725,-12.75,0.4)); +#37264 = LINE('',#37265,#37266); +#37265 = CARTESIAN_POINT('',(-2.725,-12.75,0.8)); +#37266 = VECTOR('',#37267,1.); +#37267 = DIRECTION('',(-0.,-0.,-1.)); +#37268 = ORIENTED_EDGE('',*,*,#37269,.T.); +#37269 = EDGE_CURVE('',#37262,#30978,#37270,.T.); +#37270 = LINE('',#37271,#37272); +#37271 = CARTESIAN_POINT('',(-2.725,-12.75,0.4)); +#37272 = VECTOR('',#37273,1.); +#37273 = DIRECTION('',(-0.,-0.,-1.)); +#37274 = PLANE('',#37275); +#37275 = AXIS2_PLACEMENT_3D('',#37276,#37277,#37278); +#37276 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#37277 = DIRECTION('',(0.,-1.,0.)); +#37278 = DIRECTION('',(-1.,0.,0.)); +#37279 = ADVANCED_FACE('',(#37280),#37312,.T.); +#37280 = FACE_BOUND('',#37281,.T.); +#37281 = EDGE_LOOP('',(#37282,#37283,#37291,#37297,#37298,#37306)); +#37282 = ORIENTED_EDGE('',*,*,#31177,.F.); +#37283 = ORIENTED_EDGE('',*,*,#37284,.F.); +#37284 = EDGE_CURVE('',#37285,#31178,#37287,.T.); +#37285 = VERTEX_POINT('',#37286); +#37286 = CARTESIAN_POINT('',(2.725,-12.75,0.4)); +#37287 = LINE('',#37288,#37289); +#37288 = CARTESIAN_POINT('',(2.725,-12.75,0.4)); +#37289 = VECTOR('',#37290,1.); +#37290 = DIRECTION('',(0.,0.,-1.)); +#37291 = ORIENTED_EDGE('',*,*,#37292,.F.); +#37292 = EDGE_CURVE('',#32989,#37285,#37293,.T.); +#37293 = LINE('',#37294,#37295); +#37294 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#37295 = VECTOR('',#37296,1.); +#37296 = DIRECTION('',(0.,0.,-1.)); +#37297 = ORIENTED_EDGE('',*,*,#32988,.T.); +#37298 = ORIENTED_EDGE('',*,*,#37299,.T.); +#37299 = EDGE_CURVE('',#32981,#37300,#37302,.T.); +#37300 = VERTEX_POINT('',#37301); +#37301 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#37302 = LINE('',#37303,#37304); +#37303 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#37304 = VECTOR('',#37305,1.); +#37305 = DIRECTION('',(0.,0.,-1.)); +#37306 = ORIENTED_EDGE('',*,*,#37307,.T.); +#37307 = EDGE_CURVE('',#37300,#31170,#37308,.T.); +#37308 = LINE('',#37309,#37310); +#37309 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#37310 = VECTOR('',#37311,1.); +#37311 = DIRECTION('',(0.,0.,-1.)); +#37312 = PLANE('',#37313); +#37313 = AXIS2_PLACEMENT_3D('',#37314,#37315,#37316); +#37314 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#37315 = DIRECTION('',(0.,-1.,0.)); +#37316 = DIRECTION('',(-1.,0.,0.)); +#37317 = ADVANCED_FACE('',(#37318),#37348,.F.); +#37318 = FACE_BOUND('',#37319,.T.); +#37319 = EDGE_LOOP('',(#37320,#37331,#37337,#37338,#37339,#37340,#37341, + #37342)); +#37320 = ORIENTED_EDGE('',*,*,#37321,.T.); +#37321 = EDGE_CURVE('',#37322,#37324,#37326,.T.); +#37322 = VERTEX_POINT('',#37323); +#37323 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#37324 = VERTEX_POINT('',#37325); +#37325 = CARTESIAN_POINT('',(-2.18,-12.75,0.)); +#37326 = CIRCLE('',#37327,0.275); +#37327 = AXIS2_PLACEMENT_3D('',#37328,#37329,#37330); +#37328 = CARTESIAN_POINT('',(-1.905,-12.75,0.)); +#37329 = DIRECTION('',(0.,-0.,1.)); +#37330 = DIRECTION('',(0.,1.,0.)); +#37331 = ORIENTED_EDGE('',*,*,#37332,.F.); +#37332 = EDGE_CURVE('',#30986,#37324,#37333,.T.); +#37333 = LINE('',#37334,#37335); +#37334 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#37335 = VECTOR('',#37336,1.); +#37336 = DIRECTION('',(1.,0.,0.)); +#37337 = ORIENTED_EDGE('',*,*,#30993,.T.); +#37338 = ORIENTED_EDGE('',*,*,#31001,.T.); +#37339 = ORIENTED_EDGE('',*,*,#31009,.T.); +#37340 = ORIENTED_EDGE('',*,*,#31017,.F.); +#37341 = ORIENTED_EDGE('',*,*,#31025,.T.); +#37342 = ORIENTED_EDGE('',*,*,#37343,.F.); +#37343 = EDGE_CURVE('',#37322,#31026,#37344,.T.); +#37344 = LINE('',#37345,#37346); +#37345 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#37346 = VECTOR('',#37347,1.); +#37347 = DIRECTION('',(1.,0.,0.)); +#37348 = PLANE('',#37349); +#37349 = AXIS2_PLACEMENT_3D('',#37350,#37351,#37352); +#37350 = CARTESIAN_POINT('',(-1.905,-12.32126189607,0.)); +#37351 = DIRECTION('',(0.,0.,1.)); +#37352 = DIRECTION('',(0.,1.,0.)); +#37353 = ADVANCED_FACE('',(#37354),#37384,.F.); +#37354 = FACE_BOUND('',#37355,.T.); +#37355 = EDGE_LOOP('',(#37356,#37367,#37373,#37374,#37375,#37376,#37377, + #37378)); +#37356 = ORIENTED_EDGE('',*,*,#37357,.T.); +#37357 = EDGE_CURVE('',#37358,#37360,#37362,.T.); +#37358 = VERTEX_POINT('',#37359); +#37359 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#37360 = VERTEX_POINT('',#37361); +#37361 = CARTESIAN_POINT('',(1.63,-12.75,0.)); +#37362 = CIRCLE('',#37363,0.275); +#37363 = AXIS2_PLACEMENT_3D('',#37364,#37365,#37366); +#37364 = CARTESIAN_POINT('',(1.905,-12.75,0.)); +#37365 = DIRECTION('',(0.,-0.,1.)); +#37366 = DIRECTION('',(0.,1.,0.)); +#37367 = ORIENTED_EDGE('',*,*,#37368,.F.); +#37368 = EDGE_CURVE('',#31130,#37360,#37369,.T.); +#37369 = LINE('',#37370,#37371); +#37370 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#37371 = VECTOR('',#37372,1.); +#37372 = DIRECTION('',(1.,0.,0.)); +#37373 = ORIENTED_EDGE('',*,*,#31137,.F.); +#37374 = ORIENTED_EDGE('',*,*,#31145,.T.); +#37375 = ORIENTED_EDGE('',*,*,#31153,.F.); +#37376 = ORIENTED_EDGE('',*,*,#31161,.F.); +#37377 = ORIENTED_EDGE('',*,*,#31169,.F.); +#37378 = ORIENTED_EDGE('',*,*,#37379,.F.); +#37379 = EDGE_CURVE('',#37358,#31170,#37380,.T.); +#37380 = LINE('',#37381,#37382); +#37381 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#37382 = VECTOR('',#37383,1.); +#37383 = DIRECTION('',(1.,0.,0.)); +#37384 = PLANE('',#37385); +#37385 = AXIS2_PLACEMENT_3D('',#37386,#37387,#37388); +#37386 = CARTESIAN_POINT('',(1.905,-12.32126189607,0.)); +#37387 = DIRECTION('',(0.,0.,1.)); +#37388 = DIRECTION('',(0.,1.,0.)); +#37389 = ADVANCED_FACE('',(#37390),#37422,.T.); +#37390 = FACE_BOUND('',#37391,.T.); +#37391 = EDGE_LOOP('',(#37392,#37393,#37401,#37407,#37408,#37416)); +#37392 = ORIENTED_EDGE('',*,*,#31033,.F.); +#37393 = ORIENTED_EDGE('',*,*,#37394,.F.); +#37394 = EDGE_CURVE('',#37395,#31034,#37397,.T.); +#37395 = VERTEX_POINT('',#37396); +#37396 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#37397 = LINE('',#37398,#37399); +#37398 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#37399 = VECTOR('',#37400,1.); +#37400 = DIRECTION('',(-0.,-0.,-1.)); +#37401 = ORIENTED_EDGE('',*,*,#37402,.F.); +#37402 = EDGE_CURVE('',#32893,#37395,#37403,.T.); +#37403 = LINE('',#37404,#37405); +#37404 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#37405 = VECTOR('',#37406,1.); +#37406 = DIRECTION('',(-0.,-0.,-1.)); +#37407 = ORIENTED_EDGE('',*,*,#32892,.T.); +#37408 = ORIENTED_EDGE('',*,*,#37409,.T.); +#37409 = EDGE_CURVE('',#32885,#37410,#37412,.T.); +#37410 = VERTEX_POINT('',#37411); +#37411 = CARTESIAN_POINT('',(-1.455,-12.75,0.4)); +#37412 = LINE('',#37413,#37414); +#37413 = CARTESIAN_POINT('',(-1.455,-12.75,0.8)); +#37414 = VECTOR('',#37415,1.); +#37415 = DIRECTION('',(-0.,-0.,-1.)); +#37416 = ORIENTED_EDGE('',*,*,#37417,.T.); +#37417 = EDGE_CURVE('',#37410,#31026,#37418,.T.); +#37418 = LINE('',#37419,#37420); +#37419 = CARTESIAN_POINT('',(-1.455,-12.75,0.4)); +#37420 = VECTOR('',#37421,1.); +#37421 = DIRECTION('',(-0.,-0.,-1.)); +#37422 = PLANE('',#37423); +#37423 = AXIS2_PLACEMENT_3D('',#37424,#37425,#37426); +#37424 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#37425 = DIRECTION('',(0.,-1.,0.)); +#37426 = DIRECTION('',(-1.,0.,0.)); +#37427 = ADVANCED_FACE('',(#37428),#37460,.T.); +#37428 = FACE_BOUND('',#37429,.T.); +#37429 = EDGE_LOOP('',(#37430,#37431,#37439,#37445,#37446,#37454)); +#37430 = ORIENTED_EDGE('',*,*,#31129,.F.); +#37431 = ORIENTED_EDGE('',*,*,#37432,.F.); +#37432 = EDGE_CURVE('',#37433,#31130,#37435,.T.); +#37433 = VERTEX_POINT('',#37434); +#37434 = CARTESIAN_POINT('',(1.455,-12.75,0.4)); +#37435 = LINE('',#37436,#37437); +#37436 = CARTESIAN_POINT('',(1.455,-12.75,0.4)); +#37437 = VECTOR('',#37438,1.); +#37438 = DIRECTION('',(0.,0.,-1.)); +#37439 = ORIENTED_EDGE('',*,*,#37440,.F.); +#37440 = EDGE_CURVE('',#32957,#37433,#37441,.T.); +#37441 = LINE('',#37442,#37443); +#37442 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#37443 = VECTOR('',#37444,1.); +#37444 = DIRECTION('',(0.,0.,-1.)); +#37445 = ORIENTED_EDGE('',*,*,#32956,.T.); +#37446 = ORIENTED_EDGE('',*,*,#37447,.T.); +#37447 = EDGE_CURVE('',#32949,#37448,#37450,.T.); +#37448 = VERTEX_POINT('',#37449); +#37449 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#37450 = LINE('',#37451,#37452); +#37451 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#37452 = VECTOR('',#37453,1.); +#37453 = DIRECTION('',(0.,0.,-1.)); +#37454 = ORIENTED_EDGE('',*,*,#37455,.T.); +#37455 = EDGE_CURVE('',#37448,#31122,#37456,.T.); +#37456 = LINE('',#37457,#37458); +#37457 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#37458 = VECTOR('',#37459,1.); +#37459 = DIRECTION('',(0.,0.,-1.)); +#37460 = PLANE('',#37461); +#37461 = AXIS2_PLACEMENT_3D('',#37462,#37463,#37464); +#37462 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#37463 = DIRECTION('',(0.,-1.,0.)); +#37464 = DIRECTION('',(-1.,0.,0.)); +#37465 = ADVANCED_FACE('',(#37466),#37496,.F.); +#37466 = FACE_BOUND('',#37467,.T.); +#37467 = EDGE_LOOP('',(#37468,#37479,#37485,#37486,#37487,#37488,#37489, + #37490)); +#37468 = ORIENTED_EDGE('',*,*,#37469,.T.); +#37469 = EDGE_CURVE('',#37470,#37472,#37474,.T.); +#37470 = VERTEX_POINT('',#37471); +#37471 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#37472 = VERTEX_POINT('',#37473); +#37473 = CARTESIAN_POINT('',(-0.91,-12.75,0.)); +#37474 = CIRCLE('',#37475,0.275); +#37475 = AXIS2_PLACEMENT_3D('',#37476,#37477,#37478); +#37476 = CARTESIAN_POINT('',(-0.635,-12.75,0.)); +#37477 = DIRECTION('',(0.,-0.,1.)); +#37478 = DIRECTION('',(0.,1.,0.)); +#37479 = ORIENTED_EDGE('',*,*,#37480,.F.); +#37480 = EDGE_CURVE('',#31034,#37472,#37481,.T.); +#37481 = LINE('',#37482,#37483); +#37482 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#37483 = VECTOR('',#37484,1.); +#37484 = DIRECTION('',(1.,0.,0.)); +#37485 = ORIENTED_EDGE('',*,*,#31041,.T.); +#37486 = ORIENTED_EDGE('',*,*,#31049,.T.); +#37487 = ORIENTED_EDGE('',*,*,#31057,.T.); +#37488 = ORIENTED_EDGE('',*,*,#31065,.F.); +#37489 = ORIENTED_EDGE('',*,*,#31073,.T.); +#37490 = ORIENTED_EDGE('',*,*,#37491,.F.); +#37491 = EDGE_CURVE('',#37470,#31074,#37492,.T.); +#37492 = LINE('',#37493,#37494); +#37493 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#37494 = VECTOR('',#37495,1.); +#37495 = DIRECTION('',(1.,0.,0.)); +#37496 = PLANE('',#37497); +#37497 = AXIS2_PLACEMENT_3D('',#37498,#37499,#37500); +#37498 = CARTESIAN_POINT('',(-0.635,-12.32126189607,0.)); +#37499 = DIRECTION('',(0.,0.,1.)); +#37500 = DIRECTION('',(0.,1.,0.)); +#37501 = ADVANCED_FACE('',(#37502),#37532,.F.); +#37502 = FACE_BOUND('',#37503,.T.); +#37503 = EDGE_LOOP('',(#37504,#37515,#37521,#37522,#37523,#37524,#37525, + #37526)); +#37504 = ORIENTED_EDGE('',*,*,#37505,.T.); +#37505 = EDGE_CURVE('',#37506,#37508,#37510,.T.); +#37506 = VERTEX_POINT('',#37507); +#37507 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#37508 = VERTEX_POINT('',#37509); +#37509 = CARTESIAN_POINT('',(0.36,-12.75,0.)); +#37510 = CIRCLE('',#37511,0.275); +#37511 = AXIS2_PLACEMENT_3D('',#37512,#37513,#37514); +#37512 = CARTESIAN_POINT('',(0.635,-12.75,0.)); +#37513 = DIRECTION('',(0.,-0.,1.)); +#37514 = DIRECTION('',(0.,1.,0.)); +#37515 = ORIENTED_EDGE('',*,*,#37516,.F.); +#37516 = EDGE_CURVE('',#31082,#37508,#37517,.T.); +#37517 = LINE('',#37518,#37519); +#37518 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#37519 = VECTOR('',#37520,1.); +#37520 = DIRECTION('',(1.,0.,0.)); +#37521 = ORIENTED_EDGE('',*,*,#31089,.F.); +#37522 = ORIENTED_EDGE('',*,*,#31097,.T.); +#37523 = ORIENTED_EDGE('',*,*,#31105,.F.); +#37524 = ORIENTED_EDGE('',*,*,#31113,.F.); +#37525 = ORIENTED_EDGE('',*,*,#31121,.F.); +#37526 = ORIENTED_EDGE('',*,*,#37527,.F.); +#37527 = EDGE_CURVE('',#37506,#31122,#37528,.T.); +#37528 = LINE('',#37529,#37530); +#37529 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#37530 = VECTOR('',#37531,1.); +#37531 = DIRECTION('',(1.,0.,0.)); +#37532 = PLANE('',#37533); +#37533 = AXIS2_PLACEMENT_3D('',#37534,#37535,#37536); +#37534 = CARTESIAN_POINT('',(0.635,-12.32126189607,0.)); +#37535 = DIRECTION('',(0.,0.,1.)); +#37536 = DIRECTION('',(0.,1.,0.)); +#37537 = ADVANCED_FACE('',(#37538),#37570,.T.); +#37538 = FACE_BOUND('',#37539,.T.); +#37539 = EDGE_LOOP('',(#37540,#37541,#37549,#37555,#37556,#37564)); +#37540 = ORIENTED_EDGE('',*,*,#31081,.F.); +#37541 = ORIENTED_EDGE('',*,*,#37542,.F.); +#37542 = EDGE_CURVE('',#37543,#31082,#37545,.T.); +#37543 = VERTEX_POINT('',#37544); +#37544 = CARTESIAN_POINT('',(0.185,-12.75,0.4)); +#37545 = LINE('',#37546,#37547); +#37546 = CARTESIAN_POINT('',(0.185,-12.75,0.4)); +#37547 = VECTOR('',#37548,1.); +#37548 = DIRECTION('',(0.,0.,-1.)); +#37549 = ORIENTED_EDGE('',*,*,#37550,.F.); +#37550 = EDGE_CURVE('',#32925,#37543,#37551,.T.); +#37551 = LINE('',#37552,#37553); +#37552 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#37553 = VECTOR('',#37554,1.); +#37554 = DIRECTION('',(0.,0.,-1.)); +#37555 = ORIENTED_EDGE('',*,*,#32924,.T.); +#37556 = ORIENTED_EDGE('',*,*,#37557,.T.); +#37557 = EDGE_CURVE('',#32917,#37558,#37560,.T.); +#37558 = VERTEX_POINT('',#37559); +#37559 = CARTESIAN_POINT('',(-0.185,-12.75,0.4)); +#37560 = LINE('',#37561,#37562); +#37561 = CARTESIAN_POINT('',(-0.185,-12.75,0.8)); +#37562 = VECTOR('',#37563,1.); +#37563 = DIRECTION('',(-0.,-0.,-1.)); +#37564 = ORIENTED_EDGE('',*,*,#37565,.T.); +#37565 = EDGE_CURVE('',#37558,#31074,#37566,.T.); +#37566 = LINE('',#37567,#37568); +#37567 = CARTESIAN_POINT('',(-0.185,-12.75,0.4)); +#37568 = VECTOR('',#37569,1.); +#37569 = DIRECTION('',(-0.,-0.,-1.)); +#37570 = PLANE('',#37571); +#37571 = AXIS2_PLACEMENT_3D('',#37572,#37573,#37574); +#37572 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#37573 = DIRECTION('',(0.,-1.,0.)); +#37574 = DIRECTION('',(-1.,0.,0.)); +#37575 = ADVANCED_FACE('',(#37576),#37582,.F.); +#37576 = FACE_BOUND('',#37577,.F.); +#37577 = EDGE_LOOP('',(#37578,#37579,#37580,#37581)); +#37578 = ORIENTED_EDGE('',*,*,#32028,.F.); +#37579 = ORIENTED_EDGE('',*,*,#32020,.F.); +#37580 = ORIENTED_EDGE('',*,*,#32012,.F.); +#37581 = ORIENTED_EDGE('',*,*,#32002,.F.); +#37582 = PLANE('',#37583); +#37583 = AXIS2_PLACEMENT_3D('',#37584,#37585,#37586); +#37584 = CARTESIAN_POINT('',(-2.9,-3.86,0.)); +#37585 = DIRECTION('',(0.,0.,1.)); +#37586 = DIRECTION('',(1.,0.,-0.)); +#37587 = ADVANCED_FACE('',(#37588),#37594,.F.); +#37588 = FACE_BOUND('',#37589,.F.); +#37589 = EDGE_LOOP('',(#37590,#37591,#37592,#37593)); +#37590 = ORIENTED_EDGE('',*,*,#32062,.F.); +#37591 = ORIENTED_EDGE('',*,*,#32054,.F.); +#37592 = ORIENTED_EDGE('',*,*,#32046,.F.); +#37593 = ORIENTED_EDGE('',*,*,#32036,.F.); +#37594 = PLANE('',#37595); +#37595 = AXIS2_PLACEMENT_3D('',#37596,#37597,#37598); +#37596 = CARTESIAN_POINT('',(-1.5,-3.86,0.)); +#37597 = DIRECTION('',(0.,0.,1.)); +#37598 = DIRECTION('',(1.,0.,-0.)); +#37599 = ADVANCED_FACE('',(#37600),#37606,.F.); +#37600 = FACE_BOUND('',#37601,.F.); +#37601 = EDGE_LOOP('',(#37602,#37603,#37604,#37605)); +#37602 = ORIENTED_EDGE('',*,*,#32096,.F.); +#37603 = ORIENTED_EDGE('',*,*,#32088,.F.); +#37604 = ORIENTED_EDGE('',*,*,#32080,.F.); +#37605 = ORIENTED_EDGE('',*,*,#32070,.F.); +#37606 = PLANE('',#37607); +#37607 = AXIS2_PLACEMENT_3D('',#37608,#37609,#37610); +#37608 = CARTESIAN_POINT('',(-0.1,-3.86,0.)); +#37609 = DIRECTION('',(0.,0.,1.)); +#37610 = DIRECTION('',(1.,0.,-0.)); +#37611 = ADVANCED_FACE('',(#37612),#37618,.F.); +#37612 = FACE_BOUND('',#37613,.F.); +#37613 = EDGE_LOOP('',(#37614,#37615,#37616,#37617)); +#37614 = ORIENTED_EDGE('',*,*,#32130,.F.); +#37615 = ORIENTED_EDGE('',*,*,#32122,.F.); +#37616 = ORIENTED_EDGE('',*,*,#32114,.F.); +#37617 = ORIENTED_EDGE('',*,*,#32104,.F.); +#37618 = PLANE('',#37619); +#37619 = AXIS2_PLACEMENT_3D('',#37620,#37621,#37622); +#37620 = CARTESIAN_POINT('',(-2.9,-2.46,0.)); +#37621 = DIRECTION('',(0.,0.,1.)); +#37622 = DIRECTION('',(1.,0.,-0.)); +#37623 = ADVANCED_FACE('',(#37624),#37630,.F.); +#37624 = FACE_BOUND('',#37625,.F.); +#37625 = EDGE_LOOP('',(#37626,#37627,#37628,#37629)); +#37626 = ORIENTED_EDGE('',*,*,#32164,.F.); +#37627 = ORIENTED_EDGE('',*,*,#32156,.F.); +#37628 = ORIENTED_EDGE('',*,*,#32148,.F.); +#37629 = ORIENTED_EDGE('',*,*,#32138,.F.); +#37630 = PLANE('',#37631); +#37631 = AXIS2_PLACEMENT_3D('',#37632,#37633,#37634); +#37632 = CARTESIAN_POINT('',(-1.5,-2.46,0.)); +#37633 = DIRECTION('',(0.,0.,1.)); +#37634 = DIRECTION('',(1.,0.,-0.)); +#37635 = ADVANCED_FACE('',(#37636),#37642,.F.); +#37636 = FACE_BOUND('',#37637,.F.); +#37637 = EDGE_LOOP('',(#37638,#37639,#37640,#37641)); +#37638 = ORIENTED_EDGE('',*,*,#32198,.F.); +#37639 = ORIENTED_EDGE('',*,*,#32190,.F.); +#37640 = ORIENTED_EDGE('',*,*,#32182,.F.); +#37641 = ORIENTED_EDGE('',*,*,#32172,.F.); +#37642 = PLANE('',#37643); +#37643 = AXIS2_PLACEMENT_3D('',#37644,#37645,#37646); +#37644 = CARTESIAN_POINT('',(-2.9,-1.06,0.)); +#37645 = DIRECTION('',(0.,0.,1.)); +#37646 = DIRECTION('',(1.,0.,-0.)); +#37647 = ADVANCED_FACE('',(#37648),#37654,.F.); +#37648 = FACE_BOUND('',#37649,.F.); +#37649 = EDGE_LOOP('',(#37650,#37651,#37652,#37653)); +#37650 = ORIENTED_EDGE('',*,*,#32232,.F.); +#37651 = ORIENTED_EDGE('',*,*,#32224,.F.); +#37652 = ORIENTED_EDGE('',*,*,#32216,.F.); +#37653 = ORIENTED_EDGE('',*,*,#32206,.F.); +#37654 = PLANE('',#37655); +#37655 = AXIS2_PLACEMENT_3D('',#37656,#37657,#37658); +#37656 = CARTESIAN_POINT('',(-1.5,-1.06,0.)); +#37657 = DIRECTION('',(0.,0.,1.)); +#37658 = DIRECTION('',(1.,0.,-0.)); +#37659 = ADVANCED_FACE('',(#37660),#37666,.F.); +#37660 = FACE_BOUND('',#37661,.F.); +#37661 = EDGE_LOOP('',(#37662,#37663,#37664,#37665)); +#37662 = ORIENTED_EDGE('',*,*,#32266,.F.); +#37663 = ORIENTED_EDGE('',*,*,#32258,.F.); +#37664 = ORIENTED_EDGE('',*,*,#32250,.F.); +#37665 = ORIENTED_EDGE('',*,*,#32240,.F.); +#37666 = PLANE('',#37667); +#37667 = AXIS2_PLACEMENT_3D('',#37668,#37669,#37670); +#37668 = CARTESIAN_POINT('',(-0.1,-2.46,0.)); +#37669 = DIRECTION('',(0.,0.,1.)); +#37670 = DIRECTION('',(1.,0.,-0.)); +#37671 = ADVANCED_FACE('',(#37672),#37678,.F.); +#37672 = FACE_BOUND('',#37673,.F.); +#37673 = EDGE_LOOP('',(#37674,#37675,#37676,#37677)); +#37674 = ORIENTED_EDGE('',*,*,#32300,.F.); +#37675 = ORIENTED_EDGE('',*,*,#32292,.F.); +#37676 = ORIENTED_EDGE('',*,*,#32284,.F.); +#37677 = ORIENTED_EDGE('',*,*,#32274,.F.); +#37678 = PLANE('',#37679); +#37679 = AXIS2_PLACEMENT_3D('',#37680,#37681,#37682); +#37680 = CARTESIAN_POINT('',(-0.1,-1.06,0.)); +#37681 = DIRECTION('',(0.,0.,1.)); +#37682 = DIRECTION('',(1.,0.,-0.)); +#37683 = ADVANCED_FACE('',(#37684),#37705,.T.); +#37684 = FACE_BOUND('',#37685,.T.); +#37685 = EDGE_LOOP('',(#37686,#37695,#37701,#37702,#37703,#37704)); +#37686 = ORIENTED_EDGE('',*,*,#37687,.F.); +#37687 = EDGE_CURVE('',#37688,#33846,#37690,.T.); +#37688 = VERTEX_POINT('',#37689); +#37689 = CARTESIAN_POINT('',(-9.,4.985,0.8)); +#37690 = CIRCLE('',#37691,0.275); +#37691 = AXIS2_PLACEMENT_3D('',#37692,#37693,#37694); +#37692 = CARTESIAN_POINT('',(-9.,5.26,0.8)); +#37693 = DIRECTION('',(0.,0.,1.)); +#37694 = DIRECTION('',(1.,0.,-0.)); +#37695 = ORIENTED_EDGE('',*,*,#37696,.T.); +#37696 = EDGE_CURVE('',#37688,#32333,#37697,.T.); +#37697 = LINE('',#37698,#37699); +#37698 = CARTESIAN_POINT('',(-9.,4.985,0.8)); +#37699 = VECTOR('',#37700,1.); +#37700 = DIRECTION('',(0.,-1.,0.)); +#37701 = ORIENTED_EDGE('',*,*,#32332,.F.); +#37702 = ORIENTED_EDGE('',*,*,#32324,.F.); +#37703 = ORIENTED_EDGE('',*,*,#32316,.F.); +#37704 = ORIENTED_EDGE('',*,*,#33845,.T.); +#37705 = PLANE('',#37706); +#37706 = AXIS2_PLACEMENT_3D('',#37707,#37708,#37709); +#37707 = CARTESIAN_POINT('',(-8.571261896074,5.26,0.8)); +#37708 = DIRECTION('',(0.,0.,1.)); +#37709 = DIRECTION('',(1.,0.,-0.)); +#37710 = ADVANCED_FACE('',(#37711),#37729,.T.); +#37711 = FACE_BOUND('',#37712,.F.); +#37712 = EDGE_LOOP('',(#37713,#37714,#37715,#37723)); +#37713 = ORIENTED_EDGE('',*,*,#33524,.F.); +#37714 = ORIENTED_EDGE('',*,*,#33925,.T.); +#37715 = ORIENTED_EDGE('',*,*,#37716,.T.); +#37716 = EDGE_CURVE('',#33918,#37717,#37719,.T.); +#37717 = VERTEX_POINT('',#37718); +#37718 = CARTESIAN_POINT('',(8.550000214576,4.81,0.799997961521)); +#37719 = LINE('',#37720,#37721); +#37720 = CARTESIAN_POINT('',(8.550000214576,5.71,0.799997961521)); +#37721 = VECTOR('',#37722,1.); +#37722 = DIRECTION('',(0.,-1.,0.)); +#37723 = ORIENTED_EDGE('',*,*,#37724,.F.); +#37724 = EDGE_CURVE('',#33517,#37717,#37725,.T.); +#37725 = LINE('',#37726,#37727); +#37726 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#37727 = VECTOR('',#37728,1.); +#37728 = DIRECTION('',(0.,0.,-1.)); +#37729 = PLANE('',#37730); +#37730 = AXIS2_PLACEMENT_3D('',#37731,#37732,#37733); +#37731 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#37732 = DIRECTION('',(1.,0.,0.)); +#37733 = DIRECTION('',(-0.,1.,0.)); +#37734 = ADVANCED_FACE('',(#37735),#37746,.T.); +#37735 = FACE_BOUND('',#37736,.F.); +#37736 = EDGE_LOOP('',(#37737,#37738,#37739,#37745)); +#37737 = ORIENTED_EDGE('',*,*,#33516,.F.); +#37738 = ORIENTED_EDGE('',*,*,#37724,.T.); +#37739 = ORIENTED_EDGE('',*,*,#37740,.T.); +#37740 = EDGE_CURVE('',#37717,#34090,#37741,.T.); +#37741 = LINE('',#37742,#37743); +#37742 = CARTESIAN_POINT('',(8.150000214577,4.81,0.799998056888)); +#37743 = VECTOR('',#37744,1.); +#37744 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#37745 = ORIENTED_EDGE('',*,*,#34097,.F.); +#37746 = PLANE('',#37747); +#37747 = AXIS2_PLACEMENT_3D('',#37748,#37749,#37750); +#37748 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#37749 = DIRECTION('',(0.,1.,0.)); +#37750 = DIRECTION('',(-1.,0.,0.)); +#37751 = ADVANCED_FACE('',(#37752),#37780,.T.); +#37752 = FACE_BOUND('',#37753,.T.); +#37753 = EDGE_LOOP('',(#37754,#37765,#37771,#37772,#37773,#37774)); +#37754 = ORIENTED_EDGE('',*,*,#37755,.F.); +#37755 = EDGE_CURVE('',#37756,#37758,#37760,.T.); +#37756 = VERTEX_POINT('',#37757); +#37757 = CARTESIAN_POINT('',(-9.,3.715,0.8)); +#37758 = VERTEX_POINT('',#37759); +#37759 = CARTESIAN_POINT('',(-9.,4.265,0.8)); +#37760 = CIRCLE('',#37761,0.275); +#37761 = AXIS2_PLACEMENT_3D('',#37762,#37763,#37764); +#37762 = CARTESIAN_POINT('',(-9.,3.99,0.8)); +#37763 = DIRECTION('',(0.,0.,1.)); +#37764 = DIRECTION('',(1.,0.,-0.)); +#37765 = ORIENTED_EDGE('',*,*,#37766,.T.); +#37766 = EDGE_CURVE('',#37756,#32365,#37767,.T.); +#37767 = LINE('',#37768,#37769); +#37768 = CARTESIAN_POINT('',(-9.,3.715,0.8)); +#37769 = VECTOR('',#37770,1.); +#37770 = DIRECTION('',(0.,-1.,0.)); +#37771 = ORIENTED_EDGE('',*,*,#32364,.F.); +#37772 = ORIENTED_EDGE('',*,*,#32356,.F.); +#37773 = ORIENTED_EDGE('',*,*,#32348,.F.); +#37774 = ORIENTED_EDGE('',*,*,#37775,.T.); +#37775 = EDGE_CURVE('',#32341,#37758,#37776,.T.); +#37776 = LINE('',#37777,#37778); +#37777 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#37778 = VECTOR('',#37779,1.); +#37779 = DIRECTION('',(0.,-1.,0.)); +#37780 = PLANE('',#37781); +#37781 = AXIS2_PLACEMENT_3D('',#37782,#37783,#37784); +#37782 = CARTESIAN_POINT('',(-8.571261896074,3.99,0.8)); +#37783 = DIRECTION('',(0.,0.,1.)); +#37784 = DIRECTION('',(1.,0.,-0.)); +#37785 = ADVANCED_FACE('',(#37786),#37804,.T.); +#37786 = FACE_BOUND('',#37787,.F.); +#37787 = EDGE_LOOP('',(#37788,#37789,#37790,#37798)); +#37788 = ORIENTED_EDGE('',*,*,#33500,.F.); +#37789 = ORIENTED_EDGE('',*,*,#34104,.T.); +#37790 = ORIENTED_EDGE('',*,*,#37791,.T.); +#37791 = EDGE_CURVE('',#34105,#37792,#37794,.T.); +#37792 = VERTEX_POINT('',#37793); +#37793 = CARTESIAN_POINT('',(8.550000214576,4.44,0.799997961521)); +#37794 = LINE('',#37795,#37796); +#37795 = CARTESIAN_POINT('',(9.000000214576,4.44,0.799997854233)); +#37796 = VECTOR('',#37797,1.); +#37797 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#37798 = ORIENTED_EDGE('',*,*,#37799,.F.); +#37799 = EDGE_CURVE('',#33493,#37792,#37800,.T.); +#37800 = LINE('',#37801,#37802); +#37801 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#37802 = VECTOR('',#37803,1.); +#37803 = DIRECTION('',(0.,0.,-1.)); +#37804 = PLANE('',#37805); +#37805 = AXIS2_PLACEMENT_3D('',#37806,#37807,#37808); +#37806 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#37807 = DIRECTION('',(-0.,-1.,-0.)); +#37808 = DIRECTION('',(1.,-0.,0.)); +#37809 = ADVANCED_FACE('',(#37810),#37828,.T.); +#37810 = FACE_BOUND('',#37811,.F.); +#37811 = EDGE_LOOP('',(#37812,#37813,#37814,#37822)); +#37812 = ORIENTED_EDGE('',*,*,#33492,.F.); +#37813 = ORIENTED_EDGE('',*,*,#37799,.T.); +#37814 = ORIENTED_EDGE('',*,*,#37815,.T.); +#37815 = EDGE_CURVE('',#37792,#37816,#37818,.T.); +#37816 = VERTEX_POINT('',#37817); +#37817 = CARTESIAN_POINT('',(8.550000214576,3.54,0.799997961521)); +#37818 = LINE('',#37819,#37820); +#37819 = CARTESIAN_POINT('',(8.550000214576,4.44,0.799997961521)); +#37820 = VECTOR('',#37821,1.); +#37821 = DIRECTION('',(0.,-1.,0.)); +#37822 = ORIENTED_EDGE('',*,*,#37823,.F.); +#37823 = EDGE_CURVE('',#33485,#37816,#37824,.T.); +#37824 = LINE('',#37825,#37826); +#37825 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#37826 = VECTOR('',#37827,1.); +#37827 = DIRECTION('',(0.,0.,-1.)); +#37828 = PLANE('',#37829); +#37829 = AXIS2_PLACEMENT_3D('',#37830,#37831,#37832); +#37830 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#37831 = DIRECTION('',(1.,0.,0.)); +#37832 = DIRECTION('',(-0.,1.,0.)); +#37833 = ADVANCED_FACE('',(#37834),#37845,.T.); +#37834 = FACE_BOUND('',#37835,.F.); +#37835 = EDGE_LOOP('',(#37836,#37837,#37838,#37844)); +#37836 = ORIENTED_EDGE('',*,*,#33484,.F.); +#37837 = ORIENTED_EDGE('',*,*,#37823,.T.); +#37838 = ORIENTED_EDGE('',*,*,#37839,.T.); +#37839 = EDGE_CURVE('',#37816,#34299,#37840,.T.); +#37840 = LINE('',#37841,#37842); +#37841 = CARTESIAN_POINT('',(8.150000214577,3.54,0.799998056888)); +#37842 = VECTOR('',#37843,1.); +#37843 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#37844 = ORIENTED_EDGE('',*,*,#34306,.F.); +#37845 = PLANE('',#37846); +#37846 = AXIS2_PLACEMENT_3D('',#37847,#37848,#37849); +#37847 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#37848 = DIRECTION('',(0.,1.,0.)); +#37849 = DIRECTION('',(-1.,0.,0.)); +#37850 = ADVANCED_FACE('',(#37851),#37879,.T.); +#37851 = FACE_BOUND('',#37852,.T.); +#37852 = EDGE_LOOP('',(#37853,#37864,#37870,#37871,#37872,#37873)); +#37853 = ORIENTED_EDGE('',*,*,#37854,.F.); +#37854 = EDGE_CURVE('',#37855,#37857,#37859,.T.); +#37855 = VERTEX_POINT('',#37856); +#37856 = CARTESIAN_POINT('',(-9.,2.445,0.8)); +#37857 = VERTEX_POINT('',#37858); +#37858 = CARTESIAN_POINT('',(-9.,2.995,0.8)); +#37859 = CIRCLE('',#37860,0.275); +#37860 = AXIS2_PLACEMENT_3D('',#37861,#37862,#37863); +#37861 = CARTESIAN_POINT('',(-9.,2.72,0.8)); +#37862 = DIRECTION('',(0.,0.,1.)); +#37863 = DIRECTION('',(1.,0.,-0.)); +#37864 = ORIENTED_EDGE('',*,*,#37865,.T.); +#37865 = EDGE_CURVE('',#37855,#32397,#37866,.T.); +#37866 = LINE('',#37867,#37868); +#37867 = CARTESIAN_POINT('',(-9.,2.445,0.8)); +#37868 = VECTOR('',#37869,1.); +#37869 = DIRECTION('',(0.,-1.,0.)); +#37870 = ORIENTED_EDGE('',*,*,#32396,.F.); +#37871 = ORIENTED_EDGE('',*,*,#32388,.F.); +#37872 = ORIENTED_EDGE('',*,*,#32380,.F.); +#37873 = ORIENTED_EDGE('',*,*,#37874,.T.); +#37874 = EDGE_CURVE('',#32373,#37857,#37875,.T.); +#37875 = LINE('',#37876,#37877); +#37876 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#37877 = VECTOR('',#37878,1.); +#37878 = DIRECTION('',(0.,-1.,0.)); +#37879 = PLANE('',#37880); +#37880 = AXIS2_PLACEMENT_3D('',#37881,#37882,#37883); +#37881 = CARTESIAN_POINT('',(-8.571261896074,2.72,0.8)); +#37882 = DIRECTION('',(0.,0.,1.)); +#37883 = DIRECTION('',(1.,0.,-0.)); +#37884 = ADVANCED_FACE('',(#37885),#37903,.T.); +#37885 = FACE_BOUND('',#37886,.F.); +#37886 = EDGE_LOOP('',(#37887,#37888,#37889,#37897)); +#37887 = ORIENTED_EDGE('',*,*,#33468,.F.); +#37888 = ORIENTED_EDGE('',*,*,#34313,.T.); +#37889 = ORIENTED_EDGE('',*,*,#37890,.T.); +#37890 = EDGE_CURVE('',#34314,#37891,#37893,.T.); +#37891 = VERTEX_POINT('',#37892); +#37892 = CARTESIAN_POINT('',(8.550000214576,3.17,0.799997961521)); +#37893 = LINE('',#37894,#37895); +#37894 = CARTESIAN_POINT('',(9.000000214576,3.17,0.799997854233)); +#37895 = VECTOR('',#37896,1.); +#37896 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#37897 = ORIENTED_EDGE('',*,*,#37898,.F.); +#37898 = EDGE_CURVE('',#33461,#37891,#37899,.T.); +#37899 = LINE('',#37900,#37901); +#37900 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#37901 = VECTOR('',#37902,1.); +#37902 = DIRECTION('',(0.,0.,-1.)); +#37903 = PLANE('',#37904); +#37904 = AXIS2_PLACEMENT_3D('',#37905,#37906,#37907); +#37905 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#37906 = DIRECTION('',(-0.,-1.,-0.)); +#37907 = DIRECTION('',(1.,-0.,0.)); +#37908 = ADVANCED_FACE('',(#37909),#37927,.T.); +#37909 = FACE_BOUND('',#37910,.F.); +#37910 = EDGE_LOOP('',(#37911,#37912,#37913,#37921)); +#37911 = ORIENTED_EDGE('',*,*,#33460,.F.); +#37912 = ORIENTED_EDGE('',*,*,#37898,.T.); +#37913 = ORIENTED_EDGE('',*,*,#37914,.T.); +#37914 = EDGE_CURVE('',#37891,#37915,#37917,.T.); +#37915 = VERTEX_POINT('',#37916); +#37916 = CARTESIAN_POINT('',(8.550000214576,2.27,0.799997961521)); +#37917 = LINE('',#37918,#37919); +#37918 = CARTESIAN_POINT('',(8.550000214576,3.17,0.799997961521)); +#37919 = VECTOR('',#37920,1.); +#37920 = DIRECTION('',(0.,-1.,0.)); +#37921 = ORIENTED_EDGE('',*,*,#37922,.F.); +#37922 = EDGE_CURVE('',#33453,#37915,#37923,.T.); +#37923 = LINE('',#37924,#37925); +#37924 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#37925 = VECTOR('',#37926,1.); +#37926 = DIRECTION('',(0.,0.,-1.)); +#37927 = PLANE('',#37928); +#37928 = AXIS2_PLACEMENT_3D('',#37929,#37930,#37931); +#37929 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#37930 = DIRECTION('',(1.,0.,0.)); +#37931 = DIRECTION('',(-0.,1.,0.)); +#37932 = ADVANCED_FACE('',(#37933),#37944,.T.); +#37933 = FACE_BOUND('',#37934,.F.); +#37934 = EDGE_LOOP('',(#37935,#37936,#37937,#37943)); +#37935 = ORIENTED_EDGE('',*,*,#33452,.F.); +#37936 = ORIENTED_EDGE('',*,*,#37922,.T.); +#37937 = ORIENTED_EDGE('',*,*,#37938,.T.); +#37938 = EDGE_CURVE('',#37915,#34508,#37939,.T.); +#37939 = LINE('',#37940,#37941); +#37940 = CARTESIAN_POINT('',(8.150000214577,2.27,0.799998056888)); +#37941 = VECTOR('',#37942,1.); +#37942 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#37943 = ORIENTED_EDGE('',*,*,#34515,.F.); +#37944 = PLANE('',#37945); +#37945 = AXIS2_PLACEMENT_3D('',#37946,#37947,#37948); +#37946 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#37947 = DIRECTION('',(0.,1.,0.)); +#37948 = DIRECTION('',(-1.,0.,0.)); +#37949 = ADVANCED_FACE('',(#37950),#37978,.T.); +#37950 = FACE_BOUND('',#37951,.T.); +#37951 = EDGE_LOOP('',(#37952,#37963,#37969,#37970,#37971,#37972)); +#37952 = ORIENTED_EDGE('',*,*,#37953,.F.); +#37953 = EDGE_CURVE('',#37954,#37956,#37958,.T.); +#37954 = VERTEX_POINT('',#37955); +#37955 = CARTESIAN_POINT('',(-9.,1.175,0.8)); +#37956 = VERTEX_POINT('',#37957); +#37957 = CARTESIAN_POINT('',(-9.,1.725,0.8)); +#37958 = CIRCLE('',#37959,0.275); +#37959 = AXIS2_PLACEMENT_3D('',#37960,#37961,#37962); +#37960 = CARTESIAN_POINT('',(-9.,1.45,0.8)); +#37961 = DIRECTION('',(0.,0.,1.)); +#37962 = DIRECTION('',(1.,0.,-0.)); +#37963 = ORIENTED_EDGE('',*,*,#37964,.T.); +#37964 = EDGE_CURVE('',#37954,#32429,#37965,.T.); +#37965 = LINE('',#37966,#37967); +#37966 = CARTESIAN_POINT('',(-9.,1.175,0.8)); +#37967 = VECTOR('',#37968,1.); +#37968 = DIRECTION('',(0.,-1.,0.)); +#37969 = ORIENTED_EDGE('',*,*,#32428,.F.); +#37970 = ORIENTED_EDGE('',*,*,#32420,.F.); +#37971 = ORIENTED_EDGE('',*,*,#32412,.F.); +#37972 = ORIENTED_EDGE('',*,*,#37973,.T.); +#37973 = EDGE_CURVE('',#32405,#37956,#37974,.T.); +#37974 = LINE('',#37975,#37976); +#37975 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#37976 = VECTOR('',#37977,1.); +#37977 = DIRECTION('',(0.,-1.,0.)); +#37978 = PLANE('',#37979); +#37979 = AXIS2_PLACEMENT_3D('',#37980,#37981,#37982); +#37980 = CARTESIAN_POINT('',(-8.571261896074,1.45,0.8)); +#37981 = DIRECTION('',(0.,0.,1.)); +#37982 = DIRECTION('',(1.,0.,-0.)); +#37983 = ADVANCED_FACE('',(#37984),#38002,.T.); +#37984 = FACE_BOUND('',#37985,.F.); +#37985 = EDGE_LOOP('',(#37986,#37987,#37988,#37996)); +#37986 = ORIENTED_EDGE('',*,*,#33436,.F.); +#37987 = ORIENTED_EDGE('',*,*,#34522,.T.); +#37988 = ORIENTED_EDGE('',*,*,#37989,.T.); +#37989 = EDGE_CURVE('',#34523,#37990,#37992,.T.); +#37990 = VERTEX_POINT('',#37991); +#37991 = CARTESIAN_POINT('',(8.550000214576,1.9,0.799997961521)); +#37992 = LINE('',#37993,#37994); +#37993 = CARTESIAN_POINT('',(9.000000214576,1.9,0.799997854233)); +#37994 = VECTOR('',#37995,1.); +#37995 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#37996 = ORIENTED_EDGE('',*,*,#37997,.F.); +#37997 = EDGE_CURVE('',#33429,#37990,#37998,.T.); +#37998 = LINE('',#37999,#38000); +#37999 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#38000 = VECTOR('',#38001,1.); +#38001 = DIRECTION('',(0.,0.,-1.)); +#38002 = PLANE('',#38003); +#38003 = AXIS2_PLACEMENT_3D('',#38004,#38005,#38006); +#38004 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#38005 = DIRECTION('',(-0.,-1.,-0.)); +#38006 = DIRECTION('',(1.,-0.,0.)); +#38007 = ADVANCED_FACE('',(#38008),#38026,.T.); +#38008 = FACE_BOUND('',#38009,.F.); +#38009 = EDGE_LOOP('',(#38010,#38011,#38012,#38020)); +#38010 = ORIENTED_EDGE('',*,*,#33428,.F.); +#38011 = ORIENTED_EDGE('',*,*,#37997,.T.); +#38012 = ORIENTED_EDGE('',*,*,#38013,.T.); +#38013 = EDGE_CURVE('',#37990,#38014,#38016,.T.); +#38014 = VERTEX_POINT('',#38015); +#38015 = CARTESIAN_POINT('',(8.550000214576,1.,0.799997961521)); +#38016 = LINE('',#38017,#38018); +#38017 = CARTESIAN_POINT('',(8.550000214576,1.9,0.799997961521)); +#38018 = VECTOR('',#38019,1.); +#38019 = DIRECTION('',(0.,-1.,0.)); +#38020 = ORIENTED_EDGE('',*,*,#38021,.F.); +#38021 = EDGE_CURVE('',#33421,#38014,#38022,.T.); +#38022 = LINE('',#38023,#38024); +#38023 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#38024 = VECTOR('',#38025,1.); +#38025 = DIRECTION('',(0.,0.,-1.)); +#38026 = PLANE('',#38027); +#38027 = AXIS2_PLACEMENT_3D('',#38028,#38029,#38030); +#38028 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#38029 = DIRECTION('',(1.,0.,0.)); +#38030 = DIRECTION('',(-0.,1.,0.)); +#38031 = ADVANCED_FACE('',(#38032),#38043,.T.); +#38032 = FACE_BOUND('',#38033,.F.); +#38033 = EDGE_LOOP('',(#38034,#38035,#38036,#38042)); +#38034 = ORIENTED_EDGE('',*,*,#33420,.F.); +#38035 = ORIENTED_EDGE('',*,*,#38021,.T.); +#38036 = ORIENTED_EDGE('',*,*,#38037,.T.); +#38037 = EDGE_CURVE('',#38014,#34717,#38038,.T.); +#38038 = LINE('',#38039,#38040); +#38039 = CARTESIAN_POINT('',(8.150000214577,1.,0.799998056888)); +#38040 = VECTOR('',#38041,1.); +#38041 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38042 = ORIENTED_EDGE('',*,*,#34724,.F.); +#38043 = PLANE('',#38044); +#38044 = AXIS2_PLACEMENT_3D('',#38045,#38046,#38047); +#38045 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#38046 = DIRECTION('',(0.,1.,0.)); +#38047 = DIRECTION('',(-1.,0.,0.)); +#38048 = ADVANCED_FACE('',(#38049),#38077,.T.); +#38049 = FACE_BOUND('',#38050,.T.); +#38050 = EDGE_LOOP('',(#38051,#38062,#38068,#38069,#38070,#38071)); +#38051 = ORIENTED_EDGE('',*,*,#38052,.F.); +#38052 = EDGE_CURVE('',#38053,#38055,#38057,.T.); +#38053 = VERTEX_POINT('',#38054); +#38054 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.8)); +#38055 = VERTEX_POINT('',#38056); +#38056 = CARTESIAN_POINT('',(-9.,0.455,0.8)); +#38057 = CIRCLE('',#38058,0.275); +#38058 = AXIS2_PLACEMENT_3D('',#38059,#38060,#38061); +#38059 = CARTESIAN_POINT('',(-9.,0.18,0.8)); +#38060 = DIRECTION('',(0.,0.,1.)); +#38061 = DIRECTION('',(1.,0.,-0.)); +#38062 = ORIENTED_EDGE('',*,*,#38063,.T.); +#38063 = EDGE_CURVE('',#38053,#32461,#38064,.T.); +#38064 = LINE('',#38065,#38066); +#38065 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.8)); +#38066 = VECTOR('',#38067,1.); +#38067 = DIRECTION('',(0.,-1.,0.)); +#38068 = ORIENTED_EDGE('',*,*,#32460,.F.); +#38069 = ORIENTED_EDGE('',*,*,#32452,.F.); +#38070 = ORIENTED_EDGE('',*,*,#32444,.F.); +#38071 = ORIENTED_EDGE('',*,*,#38072,.T.); +#38072 = EDGE_CURVE('',#32437,#38055,#38073,.T.); +#38073 = LINE('',#38074,#38075); +#38074 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#38075 = VECTOR('',#38076,1.); +#38076 = DIRECTION('',(0.,-1.,0.)); +#38077 = PLANE('',#38078); +#38078 = AXIS2_PLACEMENT_3D('',#38079,#38080,#38081); +#38079 = CARTESIAN_POINT('',(-8.571261896074,0.18,0.8)); +#38080 = DIRECTION('',(0.,0.,1.)); +#38081 = DIRECTION('',(1.,0.,-0.)); +#38082 = ADVANCED_FACE('',(#38083),#38101,.T.); +#38083 = FACE_BOUND('',#38084,.F.); +#38084 = EDGE_LOOP('',(#38085,#38086,#38087,#38095)); +#38085 = ORIENTED_EDGE('',*,*,#33404,.F.); +#38086 = ORIENTED_EDGE('',*,*,#34731,.T.); +#38087 = ORIENTED_EDGE('',*,*,#38088,.T.); +#38088 = EDGE_CURVE('',#34732,#38089,#38091,.T.); +#38089 = VERTEX_POINT('',#38090); +#38090 = CARTESIAN_POINT('',(8.550000214576,0.63,0.799997961521)); +#38091 = LINE('',#38092,#38093); +#38092 = CARTESIAN_POINT('',(9.000000214576,0.63,0.799997854233)); +#38093 = VECTOR('',#38094,1.); +#38094 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38095 = ORIENTED_EDGE('',*,*,#38096,.F.); +#38096 = EDGE_CURVE('',#33397,#38089,#38097,.T.); +#38097 = LINE('',#38098,#38099); +#38098 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#38099 = VECTOR('',#38100,1.); +#38100 = DIRECTION('',(0.,0.,-1.)); +#38101 = PLANE('',#38102); +#38102 = AXIS2_PLACEMENT_3D('',#38103,#38104,#38105); +#38103 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#38104 = DIRECTION('',(-0.,-1.,-0.)); +#38105 = DIRECTION('',(1.,-0.,0.)); +#38106 = ADVANCED_FACE('',(#38107),#38125,.T.); +#38107 = FACE_BOUND('',#38108,.F.); +#38108 = EDGE_LOOP('',(#38109,#38110,#38111,#38119)); +#38109 = ORIENTED_EDGE('',*,*,#33396,.F.); +#38110 = ORIENTED_EDGE('',*,*,#38096,.T.); +#38111 = ORIENTED_EDGE('',*,*,#38112,.T.); +#38112 = EDGE_CURVE('',#38089,#38113,#38115,.T.); +#38113 = VERTEX_POINT('',#38114); +#38114 = CARTESIAN_POINT('',(8.550000214576,-0.27,0.799997961521)); +#38115 = LINE('',#38116,#38117); +#38116 = CARTESIAN_POINT('',(8.550000214576,0.63,0.799997961521)); +#38117 = VECTOR('',#38118,1.); +#38118 = DIRECTION('',(0.,-1.,0.)); +#38119 = ORIENTED_EDGE('',*,*,#38120,.F.); +#38120 = EDGE_CURVE('',#33389,#38113,#38121,.T.); +#38121 = LINE('',#38122,#38123); +#38122 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#38123 = VECTOR('',#38124,1.); +#38124 = DIRECTION('',(0.,0.,-1.)); +#38125 = PLANE('',#38126); +#38126 = AXIS2_PLACEMENT_3D('',#38127,#38128,#38129); +#38127 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#38128 = DIRECTION('',(1.,0.,0.)); +#38129 = DIRECTION('',(-0.,1.,0.)); +#38130 = ADVANCED_FACE('',(#38131),#38142,.T.); +#38131 = FACE_BOUND('',#38132,.F.); +#38132 = EDGE_LOOP('',(#38133,#38134,#38135,#38141)); +#38133 = ORIENTED_EDGE('',*,*,#33388,.F.); +#38134 = ORIENTED_EDGE('',*,*,#38120,.T.); +#38135 = ORIENTED_EDGE('',*,*,#38136,.T.); +#38136 = EDGE_CURVE('',#38113,#34926,#38137,.T.); +#38137 = LINE('',#38138,#38139); +#38138 = CARTESIAN_POINT('',(8.150000214577,-0.27,0.799998056888)); +#38139 = VECTOR('',#38140,1.); +#38140 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38141 = ORIENTED_EDGE('',*,*,#34933,.F.); +#38142 = PLANE('',#38143); +#38143 = AXIS2_PLACEMENT_3D('',#38144,#38145,#38146); +#38144 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#38145 = DIRECTION('',(0.,1.,0.)); +#38146 = DIRECTION('',(-1.,0.,0.)); +#38147 = ADVANCED_FACE('',(#38148),#38176,.T.); +#38148 = FACE_BOUND('',#38149,.T.); +#38149 = EDGE_LOOP('',(#38150,#38161,#38167,#38168,#38169,#38170)); +#38150 = ORIENTED_EDGE('',*,*,#38151,.F.); +#38151 = EDGE_CURVE('',#38152,#38154,#38156,.T.); +#38152 = VERTEX_POINT('',#38153); +#38153 = CARTESIAN_POINT('',(-9.,-1.365,0.8)); +#38154 = VERTEX_POINT('',#38155); +#38155 = CARTESIAN_POINT('',(-9.,-0.815,0.8)); +#38156 = CIRCLE('',#38157,0.275); +#38157 = AXIS2_PLACEMENT_3D('',#38158,#38159,#38160); +#38158 = CARTESIAN_POINT('',(-9.,-1.09,0.8)); +#38159 = DIRECTION('',(0.,0.,1.)); +#38160 = DIRECTION('',(1.,0.,-0.)); +#38161 = ORIENTED_EDGE('',*,*,#38162,.T.); +#38162 = EDGE_CURVE('',#38152,#32493,#38163,.T.); +#38163 = LINE('',#38164,#38165); +#38164 = CARTESIAN_POINT('',(-9.,-1.365,0.8)); +#38165 = VECTOR('',#38166,1.); +#38166 = DIRECTION('',(0.,-1.,0.)); +#38167 = ORIENTED_EDGE('',*,*,#32492,.F.); +#38168 = ORIENTED_EDGE('',*,*,#32484,.F.); +#38169 = ORIENTED_EDGE('',*,*,#32476,.F.); +#38170 = ORIENTED_EDGE('',*,*,#38171,.T.); +#38171 = EDGE_CURVE('',#32469,#38154,#38172,.T.); +#38172 = LINE('',#38173,#38174); +#38173 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#38174 = VECTOR('',#38175,1.); +#38175 = DIRECTION('',(0.,-1.,0.)); +#38176 = PLANE('',#38177); +#38177 = AXIS2_PLACEMENT_3D('',#38178,#38179,#38180); +#38178 = CARTESIAN_POINT('',(-8.571261896074,-1.09,0.8)); +#38179 = DIRECTION('',(0.,0.,1.)); +#38180 = DIRECTION('',(1.,0.,-0.)); +#38181 = ADVANCED_FACE('',(#38182),#38200,.T.); +#38182 = FACE_BOUND('',#38183,.F.); +#38183 = EDGE_LOOP('',(#38184,#38185,#38186,#38194)); +#38184 = ORIENTED_EDGE('',*,*,#33372,.F.); +#38185 = ORIENTED_EDGE('',*,*,#34940,.T.); +#38186 = ORIENTED_EDGE('',*,*,#38187,.T.); +#38187 = EDGE_CURVE('',#34941,#38188,#38190,.T.); +#38188 = VERTEX_POINT('',#38189); +#38189 = CARTESIAN_POINT('',(8.550000214576,-0.64,0.799997961521)); +#38190 = LINE('',#38191,#38192); +#38191 = CARTESIAN_POINT('',(9.000000214576,-0.64,0.799997854233)); +#38192 = VECTOR('',#38193,1.); +#38193 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38194 = ORIENTED_EDGE('',*,*,#38195,.F.); +#38195 = EDGE_CURVE('',#33365,#38188,#38196,.T.); +#38196 = LINE('',#38197,#38198); +#38197 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#38198 = VECTOR('',#38199,1.); +#38199 = DIRECTION('',(0.,0.,-1.)); +#38200 = PLANE('',#38201); +#38201 = AXIS2_PLACEMENT_3D('',#38202,#38203,#38204); +#38202 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#38203 = DIRECTION('',(-0.,-1.,-0.)); +#38204 = DIRECTION('',(1.,-0.,0.)); +#38205 = ADVANCED_FACE('',(#38206),#38224,.T.); +#38206 = FACE_BOUND('',#38207,.F.); +#38207 = EDGE_LOOP('',(#38208,#38209,#38210,#38218)); +#38208 = ORIENTED_EDGE('',*,*,#33364,.F.); +#38209 = ORIENTED_EDGE('',*,*,#38195,.T.); +#38210 = ORIENTED_EDGE('',*,*,#38211,.T.); +#38211 = EDGE_CURVE('',#38188,#38212,#38214,.T.); +#38212 = VERTEX_POINT('',#38213); +#38213 = CARTESIAN_POINT('',(8.550000214576,-1.54,0.799997961521)); +#38214 = LINE('',#38215,#38216); +#38215 = CARTESIAN_POINT('',(8.550000214576,-0.64,0.799997961521)); +#38216 = VECTOR('',#38217,1.); +#38217 = DIRECTION('',(0.,-1.,0.)); +#38218 = ORIENTED_EDGE('',*,*,#38219,.F.); +#38219 = EDGE_CURVE('',#33357,#38212,#38220,.T.); +#38220 = LINE('',#38221,#38222); +#38221 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#38222 = VECTOR('',#38223,1.); +#38223 = DIRECTION('',(0.,0.,-1.)); +#38224 = PLANE('',#38225); +#38225 = AXIS2_PLACEMENT_3D('',#38226,#38227,#38228); +#38226 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#38227 = DIRECTION('',(1.,0.,0.)); +#38228 = DIRECTION('',(-0.,1.,0.)); +#38229 = ADVANCED_FACE('',(#38230),#38241,.T.); +#38230 = FACE_BOUND('',#38231,.F.); +#38231 = EDGE_LOOP('',(#38232,#38233,#38234,#38240)); +#38232 = ORIENTED_EDGE('',*,*,#33356,.F.); +#38233 = ORIENTED_EDGE('',*,*,#38219,.T.); +#38234 = ORIENTED_EDGE('',*,*,#38235,.T.); +#38235 = EDGE_CURVE('',#38212,#35135,#38236,.T.); +#38236 = LINE('',#38237,#38238); +#38237 = CARTESIAN_POINT('',(8.150000214577,-1.54,0.799998056888)); +#38238 = VECTOR('',#38239,1.); +#38239 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38240 = ORIENTED_EDGE('',*,*,#35142,.F.); +#38241 = PLANE('',#38242); +#38242 = AXIS2_PLACEMENT_3D('',#38243,#38244,#38245); +#38243 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#38244 = DIRECTION('',(0.,1.,0.)); +#38245 = DIRECTION('',(-1.,0.,0.)); +#38246 = ADVANCED_FACE('',(#38247),#38275,.T.); +#38247 = FACE_BOUND('',#38248,.T.); +#38248 = EDGE_LOOP('',(#38249,#38260,#38266,#38267,#38268,#38269)); +#38249 = ORIENTED_EDGE('',*,*,#38250,.F.); +#38250 = EDGE_CURVE('',#38251,#38253,#38255,.T.); +#38251 = VERTEX_POINT('',#38252); +#38252 = CARTESIAN_POINT('',(-9.,-2.635,0.8)); +#38253 = VERTEX_POINT('',#38254); +#38254 = CARTESIAN_POINT('',(-9.,-2.085,0.8)); +#38255 = CIRCLE('',#38256,0.275); +#38256 = AXIS2_PLACEMENT_3D('',#38257,#38258,#38259); +#38257 = CARTESIAN_POINT('',(-9.,-2.36,0.8)); +#38258 = DIRECTION('',(0.,0.,1.)); +#38259 = DIRECTION('',(1.,0.,-0.)); +#38260 = ORIENTED_EDGE('',*,*,#38261,.T.); +#38261 = EDGE_CURVE('',#38251,#32525,#38262,.T.); +#38262 = LINE('',#38263,#38264); +#38263 = CARTESIAN_POINT('',(-9.,-2.635,0.8)); +#38264 = VECTOR('',#38265,1.); +#38265 = DIRECTION('',(0.,-1.,0.)); +#38266 = ORIENTED_EDGE('',*,*,#32524,.F.); +#38267 = ORIENTED_EDGE('',*,*,#32516,.F.); +#38268 = ORIENTED_EDGE('',*,*,#32508,.F.); +#38269 = ORIENTED_EDGE('',*,*,#38270,.T.); +#38270 = EDGE_CURVE('',#32501,#38253,#38271,.T.); +#38271 = LINE('',#38272,#38273); +#38272 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#38273 = VECTOR('',#38274,1.); +#38274 = DIRECTION('',(0.,-1.,0.)); +#38275 = PLANE('',#38276); +#38276 = AXIS2_PLACEMENT_3D('',#38277,#38278,#38279); +#38277 = CARTESIAN_POINT('',(-8.571261896074,-2.36,0.8)); +#38278 = DIRECTION('',(0.,0.,1.)); +#38279 = DIRECTION('',(1.,0.,-0.)); +#38280 = ADVANCED_FACE('',(#38281),#38299,.T.); +#38281 = FACE_BOUND('',#38282,.F.); +#38282 = EDGE_LOOP('',(#38283,#38284,#38285,#38293)); +#38283 = ORIENTED_EDGE('',*,*,#33340,.F.); +#38284 = ORIENTED_EDGE('',*,*,#35149,.T.); +#38285 = ORIENTED_EDGE('',*,*,#38286,.T.); +#38286 = EDGE_CURVE('',#35150,#38287,#38289,.T.); +#38287 = VERTEX_POINT('',#38288); +#38288 = CARTESIAN_POINT('',(8.550000214576,-1.91,0.799997961521)); +#38289 = LINE('',#38290,#38291); +#38290 = CARTESIAN_POINT('',(9.000000214576,-1.91,0.799997854233)); +#38291 = VECTOR('',#38292,1.); +#38292 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38293 = ORIENTED_EDGE('',*,*,#38294,.F.); +#38294 = EDGE_CURVE('',#33333,#38287,#38295,.T.); +#38295 = LINE('',#38296,#38297); +#38296 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#38297 = VECTOR('',#38298,1.); +#38298 = DIRECTION('',(0.,0.,-1.)); +#38299 = PLANE('',#38300); +#38300 = AXIS2_PLACEMENT_3D('',#38301,#38302,#38303); +#38301 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#38302 = DIRECTION('',(-0.,-1.,-0.)); +#38303 = DIRECTION('',(1.,-0.,0.)); +#38304 = ADVANCED_FACE('',(#38305),#38323,.T.); +#38305 = FACE_BOUND('',#38306,.F.); +#38306 = EDGE_LOOP('',(#38307,#38308,#38309,#38317)); +#38307 = ORIENTED_EDGE('',*,*,#33332,.F.); +#38308 = ORIENTED_EDGE('',*,*,#38294,.T.); +#38309 = ORIENTED_EDGE('',*,*,#38310,.T.); +#38310 = EDGE_CURVE('',#38287,#38311,#38313,.T.); +#38311 = VERTEX_POINT('',#38312); +#38312 = CARTESIAN_POINT('',(8.550000214576,-2.81,0.799997961521)); +#38313 = LINE('',#38314,#38315); +#38314 = CARTESIAN_POINT('',(8.550000214576,-1.91,0.799997961521)); +#38315 = VECTOR('',#38316,1.); +#38316 = DIRECTION('',(0.,-1.,0.)); +#38317 = ORIENTED_EDGE('',*,*,#38318,.F.); +#38318 = EDGE_CURVE('',#33325,#38311,#38319,.T.); +#38319 = LINE('',#38320,#38321); +#38320 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#38321 = VECTOR('',#38322,1.); +#38322 = DIRECTION('',(0.,0.,-1.)); +#38323 = PLANE('',#38324); +#38324 = AXIS2_PLACEMENT_3D('',#38325,#38326,#38327); +#38325 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#38326 = DIRECTION('',(1.,0.,0.)); +#38327 = DIRECTION('',(-0.,1.,0.)); +#38328 = ADVANCED_FACE('',(#38329),#38340,.T.); +#38329 = FACE_BOUND('',#38330,.F.); +#38330 = EDGE_LOOP('',(#38331,#38332,#38333,#38339)); +#38331 = ORIENTED_EDGE('',*,*,#33324,.F.); +#38332 = ORIENTED_EDGE('',*,*,#38318,.T.); +#38333 = ORIENTED_EDGE('',*,*,#38334,.T.); +#38334 = EDGE_CURVE('',#38311,#35344,#38335,.T.); +#38335 = LINE('',#38336,#38337); +#38336 = CARTESIAN_POINT('',(8.150000214577,-2.81,0.799998056888)); +#38337 = VECTOR('',#38338,1.); +#38338 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38339 = ORIENTED_EDGE('',*,*,#35351,.F.); +#38340 = PLANE('',#38341); +#38341 = AXIS2_PLACEMENT_3D('',#38342,#38343,#38344); +#38342 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#38343 = DIRECTION('',(0.,1.,0.)); +#38344 = DIRECTION('',(-1.,0.,0.)); +#38345 = ADVANCED_FACE('',(#38346),#38374,.T.); +#38346 = FACE_BOUND('',#38347,.T.); +#38347 = EDGE_LOOP('',(#38348,#38359,#38365,#38366,#38367,#38368)); +#38348 = ORIENTED_EDGE('',*,*,#38349,.F.); +#38349 = EDGE_CURVE('',#38350,#38352,#38354,.T.); +#38350 = VERTEX_POINT('',#38351); +#38351 = CARTESIAN_POINT('',(-9.,-3.905,0.8)); +#38352 = VERTEX_POINT('',#38353); +#38353 = CARTESIAN_POINT('',(-9.,-3.355,0.8)); +#38354 = CIRCLE('',#38355,0.275); +#38355 = AXIS2_PLACEMENT_3D('',#38356,#38357,#38358); +#38356 = CARTESIAN_POINT('',(-9.,-3.63,0.8)); +#38357 = DIRECTION('',(0.,0.,1.)); +#38358 = DIRECTION('',(1.,0.,-0.)); +#38359 = ORIENTED_EDGE('',*,*,#38360,.T.); +#38360 = EDGE_CURVE('',#38350,#32557,#38361,.T.); +#38361 = LINE('',#38362,#38363); +#38362 = CARTESIAN_POINT('',(-9.,-3.905,0.8)); +#38363 = VECTOR('',#38364,1.); +#38364 = DIRECTION('',(0.,-1.,0.)); +#38365 = ORIENTED_EDGE('',*,*,#32556,.F.); +#38366 = ORIENTED_EDGE('',*,*,#32548,.F.); +#38367 = ORIENTED_EDGE('',*,*,#32540,.F.); +#38368 = ORIENTED_EDGE('',*,*,#38369,.T.); +#38369 = EDGE_CURVE('',#32533,#38352,#38370,.T.); +#38370 = LINE('',#38371,#38372); +#38371 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#38372 = VECTOR('',#38373,1.); +#38373 = DIRECTION('',(0.,-1.,0.)); +#38374 = PLANE('',#38375); +#38375 = AXIS2_PLACEMENT_3D('',#38376,#38377,#38378); +#38376 = CARTESIAN_POINT('',(-8.571261896074,-3.63,0.8)); +#38377 = DIRECTION('',(0.,0.,1.)); +#38378 = DIRECTION('',(1.,0.,-0.)); +#38379 = ADVANCED_FACE('',(#38380),#38398,.T.); +#38380 = FACE_BOUND('',#38381,.F.); +#38381 = EDGE_LOOP('',(#38382,#38383,#38384,#38392)); +#38382 = ORIENTED_EDGE('',*,*,#33308,.F.); +#38383 = ORIENTED_EDGE('',*,*,#35358,.T.); +#38384 = ORIENTED_EDGE('',*,*,#38385,.T.); +#38385 = EDGE_CURVE('',#35359,#38386,#38388,.T.); +#38386 = VERTEX_POINT('',#38387); +#38387 = CARTESIAN_POINT('',(8.550000214576,-3.18,0.799997961521)); +#38388 = LINE('',#38389,#38390); +#38389 = CARTESIAN_POINT('',(9.000000214576,-3.18,0.799997854233)); +#38390 = VECTOR('',#38391,1.); +#38391 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38392 = ORIENTED_EDGE('',*,*,#38393,.F.); +#38393 = EDGE_CURVE('',#33301,#38386,#38394,.T.); +#38394 = LINE('',#38395,#38396); +#38395 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#38396 = VECTOR('',#38397,1.); +#38397 = DIRECTION('',(0.,0.,-1.)); +#38398 = PLANE('',#38399); +#38399 = AXIS2_PLACEMENT_3D('',#38400,#38401,#38402); +#38400 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#38401 = DIRECTION('',(-0.,-1.,-0.)); +#38402 = DIRECTION('',(1.,-0.,0.)); +#38403 = ADVANCED_FACE('',(#38404),#38422,.T.); +#38404 = FACE_BOUND('',#38405,.F.); +#38405 = EDGE_LOOP('',(#38406,#38407,#38408,#38416)); +#38406 = ORIENTED_EDGE('',*,*,#33300,.F.); +#38407 = ORIENTED_EDGE('',*,*,#38393,.T.); +#38408 = ORIENTED_EDGE('',*,*,#38409,.T.); +#38409 = EDGE_CURVE('',#38386,#38410,#38412,.T.); +#38410 = VERTEX_POINT('',#38411); +#38411 = CARTESIAN_POINT('',(8.550000214576,-4.08,0.799997961521)); +#38412 = LINE('',#38413,#38414); +#38413 = CARTESIAN_POINT('',(8.550000214576,-3.18,0.799997961521)); +#38414 = VECTOR('',#38415,1.); +#38415 = DIRECTION('',(0.,-1.,0.)); +#38416 = ORIENTED_EDGE('',*,*,#38417,.F.); +#38417 = EDGE_CURVE('',#33293,#38410,#38418,.T.); +#38418 = LINE('',#38419,#38420); +#38419 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#38420 = VECTOR('',#38421,1.); +#38421 = DIRECTION('',(0.,0.,-1.)); +#38422 = PLANE('',#38423); +#38423 = AXIS2_PLACEMENT_3D('',#38424,#38425,#38426); +#38424 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#38425 = DIRECTION('',(1.,0.,0.)); +#38426 = DIRECTION('',(-0.,1.,0.)); +#38427 = ADVANCED_FACE('',(#38428),#38439,.T.); +#38428 = FACE_BOUND('',#38429,.F.); +#38429 = EDGE_LOOP('',(#38430,#38431,#38432,#38438)); +#38430 = ORIENTED_EDGE('',*,*,#33292,.F.); +#38431 = ORIENTED_EDGE('',*,*,#38417,.T.); +#38432 = ORIENTED_EDGE('',*,*,#38433,.T.); +#38433 = EDGE_CURVE('',#38410,#35553,#38434,.T.); +#38434 = LINE('',#38435,#38436); +#38435 = CARTESIAN_POINT('',(8.150000214577,-4.08,0.799998056888)); +#38436 = VECTOR('',#38437,1.); +#38437 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38438 = ORIENTED_EDGE('',*,*,#35560,.F.); +#38439 = PLANE('',#38440); +#38440 = AXIS2_PLACEMENT_3D('',#38441,#38442,#38443); +#38441 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#38442 = DIRECTION('',(0.,1.,0.)); +#38443 = DIRECTION('',(-1.,0.,0.)); +#38444 = ADVANCED_FACE('',(#38445),#38473,.T.); +#38445 = FACE_BOUND('',#38446,.T.); +#38446 = EDGE_LOOP('',(#38447,#38458,#38464,#38465,#38466,#38467)); +#38447 = ORIENTED_EDGE('',*,*,#38448,.F.); +#38448 = EDGE_CURVE('',#38449,#38451,#38453,.T.); +#38449 = VERTEX_POINT('',#38450); +#38450 = CARTESIAN_POINT('',(-9.,-5.175,0.8)); +#38451 = VERTEX_POINT('',#38452); +#38452 = CARTESIAN_POINT('',(-9.,-4.625,0.8)); +#38453 = CIRCLE('',#38454,0.275); +#38454 = AXIS2_PLACEMENT_3D('',#38455,#38456,#38457); +#38455 = CARTESIAN_POINT('',(-9.,-4.9,0.8)); +#38456 = DIRECTION('',(0.,0.,1.)); +#38457 = DIRECTION('',(1.,0.,-0.)); +#38458 = ORIENTED_EDGE('',*,*,#38459,.T.); +#38459 = EDGE_CURVE('',#38449,#32589,#38460,.T.); +#38460 = LINE('',#38461,#38462); +#38461 = CARTESIAN_POINT('',(-9.,-5.175,0.8)); +#38462 = VECTOR('',#38463,1.); +#38463 = DIRECTION('',(0.,-1.,0.)); +#38464 = ORIENTED_EDGE('',*,*,#32588,.F.); +#38465 = ORIENTED_EDGE('',*,*,#32580,.F.); +#38466 = ORIENTED_EDGE('',*,*,#32572,.F.); +#38467 = ORIENTED_EDGE('',*,*,#38468,.T.); +#38468 = EDGE_CURVE('',#32565,#38451,#38469,.T.); +#38469 = LINE('',#38470,#38471); +#38470 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#38471 = VECTOR('',#38472,1.); +#38472 = DIRECTION('',(0.,-1.,0.)); +#38473 = PLANE('',#38474); +#38474 = AXIS2_PLACEMENT_3D('',#38475,#38476,#38477); +#38475 = CARTESIAN_POINT('',(-8.571261896074,-4.9,0.8)); +#38476 = DIRECTION('',(0.,0.,1.)); +#38477 = DIRECTION('',(1.,0.,-0.)); +#38478 = ADVANCED_FACE('',(#38479),#38497,.T.); +#38479 = FACE_BOUND('',#38480,.F.); +#38480 = EDGE_LOOP('',(#38481,#38482,#38483,#38491)); +#38481 = ORIENTED_EDGE('',*,*,#33276,.F.); +#38482 = ORIENTED_EDGE('',*,*,#35567,.T.); +#38483 = ORIENTED_EDGE('',*,*,#38484,.T.); +#38484 = EDGE_CURVE('',#35568,#38485,#38487,.T.); +#38485 = VERTEX_POINT('',#38486); +#38486 = CARTESIAN_POINT('',(8.550000214576,-4.45,0.799997961521)); +#38487 = LINE('',#38488,#38489); +#38488 = CARTESIAN_POINT('',(9.000000214576,-4.45,0.799997854233)); +#38489 = VECTOR('',#38490,1.); +#38490 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38491 = ORIENTED_EDGE('',*,*,#38492,.F.); +#38492 = EDGE_CURVE('',#33269,#38485,#38493,.T.); +#38493 = LINE('',#38494,#38495); +#38494 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#38495 = VECTOR('',#38496,1.); +#38496 = DIRECTION('',(0.,0.,-1.)); +#38497 = PLANE('',#38498); +#38498 = AXIS2_PLACEMENT_3D('',#38499,#38500,#38501); +#38499 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#38500 = DIRECTION('',(-0.,-1.,-0.)); +#38501 = DIRECTION('',(1.,-0.,0.)); +#38502 = ADVANCED_FACE('',(#38503),#38521,.T.); +#38503 = FACE_BOUND('',#38504,.F.); +#38504 = EDGE_LOOP('',(#38505,#38506,#38507,#38515)); +#38505 = ORIENTED_EDGE('',*,*,#33268,.F.); +#38506 = ORIENTED_EDGE('',*,*,#38492,.T.); +#38507 = ORIENTED_EDGE('',*,*,#38508,.T.); +#38508 = EDGE_CURVE('',#38485,#38509,#38511,.T.); +#38509 = VERTEX_POINT('',#38510); +#38510 = CARTESIAN_POINT('',(8.550000214576,-5.35,0.799997961521)); +#38511 = LINE('',#38512,#38513); +#38512 = CARTESIAN_POINT('',(8.550000214576,-4.45,0.799997961521)); +#38513 = VECTOR('',#38514,1.); +#38514 = DIRECTION('',(0.,-1.,0.)); +#38515 = ORIENTED_EDGE('',*,*,#38516,.F.); +#38516 = EDGE_CURVE('',#33261,#38509,#38517,.T.); +#38517 = LINE('',#38518,#38519); +#38518 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#38519 = VECTOR('',#38520,1.); +#38520 = DIRECTION('',(0.,0.,-1.)); +#38521 = PLANE('',#38522); +#38522 = AXIS2_PLACEMENT_3D('',#38523,#38524,#38525); +#38523 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#38524 = DIRECTION('',(1.,0.,0.)); +#38525 = DIRECTION('',(-0.,1.,0.)); +#38526 = ADVANCED_FACE('',(#38527),#38538,.T.); +#38527 = FACE_BOUND('',#38528,.F.); +#38528 = EDGE_LOOP('',(#38529,#38530,#38531,#38537)); +#38529 = ORIENTED_EDGE('',*,*,#33260,.F.); +#38530 = ORIENTED_EDGE('',*,*,#38516,.T.); +#38531 = ORIENTED_EDGE('',*,*,#38532,.T.); +#38532 = EDGE_CURVE('',#38509,#35762,#38533,.T.); +#38533 = LINE('',#38534,#38535); +#38534 = CARTESIAN_POINT('',(8.150000214577,-5.35,0.799998056888)); +#38535 = VECTOR('',#38536,1.); +#38536 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38537 = ORIENTED_EDGE('',*,*,#35769,.F.); +#38538 = PLANE('',#38539); +#38539 = AXIS2_PLACEMENT_3D('',#38540,#38541,#38542); +#38540 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#38541 = DIRECTION('',(0.,1.,0.)); +#38542 = DIRECTION('',(-1.,0.,0.)); +#38543 = ADVANCED_FACE('',(#38544),#38572,.T.); +#38544 = FACE_BOUND('',#38545,.T.); +#38545 = EDGE_LOOP('',(#38546,#38557,#38563,#38564,#38565,#38566)); +#38546 = ORIENTED_EDGE('',*,*,#38547,.F.); +#38547 = EDGE_CURVE('',#38548,#38550,#38552,.T.); +#38548 = VERTEX_POINT('',#38549); +#38549 = CARTESIAN_POINT('',(-9.,-6.445,0.8)); +#38550 = VERTEX_POINT('',#38551); +#38551 = CARTESIAN_POINT('',(-9.,-5.895,0.8)); +#38552 = CIRCLE('',#38553,0.275); +#38553 = AXIS2_PLACEMENT_3D('',#38554,#38555,#38556); +#38554 = CARTESIAN_POINT('',(-9.,-6.17,0.8)); +#38555 = DIRECTION('',(0.,0.,1.)); +#38556 = DIRECTION('',(1.,0.,-0.)); +#38557 = ORIENTED_EDGE('',*,*,#38558,.T.); +#38558 = EDGE_CURVE('',#38548,#32621,#38559,.T.); +#38559 = LINE('',#38560,#38561); +#38560 = CARTESIAN_POINT('',(-9.,-6.445,0.8)); +#38561 = VECTOR('',#38562,1.); +#38562 = DIRECTION('',(0.,-1.,0.)); +#38563 = ORIENTED_EDGE('',*,*,#32620,.F.); +#38564 = ORIENTED_EDGE('',*,*,#32612,.F.); +#38565 = ORIENTED_EDGE('',*,*,#32604,.F.); +#38566 = ORIENTED_EDGE('',*,*,#38567,.T.); +#38567 = EDGE_CURVE('',#32597,#38550,#38568,.T.); +#38568 = LINE('',#38569,#38570); +#38569 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#38570 = VECTOR('',#38571,1.); +#38571 = DIRECTION('',(0.,-1.,0.)); +#38572 = PLANE('',#38573); +#38573 = AXIS2_PLACEMENT_3D('',#38574,#38575,#38576); +#38574 = CARTESIAN_POINT('',(-8.571261896074,-6.17,0.8)); +#38575 = DIRECTION('',(0.,0.,1.)); +#38576 = DIRECTION('',(1.,0.,-0.)); +#38577 = ADVANCED_FACE('',(#38578),#38596,.T.); +#38578 = FACE_BOUND('',#38579,.F.); +#38579 = EDGE_LOOP('',(#38580,#38581,#38582,#38590)); +#38580 = ORIENTED_EDGE('',*,*,#33244,.F.); +#38581 = ORIENTED_EDGE('',*,*,#35776,.T.); +#38582 = ORIENTED_EDGE('',*,*,#38583,.T.); +#38583 = EDGE_CURVE('',#35777,#38584,#38586,.T.); +#38584 = VERTEX_POINT('',#38585); +#38585 = CARTESIAN_POINT('',(8.550000214576,-5.72,0.799997961521)); +#38586 = LINE('',#38587,#38588); +#38587 = CARTESIAN_POINT('',(9.000000214576,-5.72,0.799997854233)); +#38588 = VECTOR('',#38589,1.); +#38589 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38590 = ORIENTED_EDGE('',*,*,#38591,.F.); +#38591 = EDGE_CURVE('',#33237,#38584,#38592,.T.); +#38592 = LINE('',#38593,#38594); +#38593 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#38594 = VECTOR('',#38595,1.); +#38595 = DIRECTION('',(0.,0.,-1.)); +#38596 = PLANE('',#38597); +#38597 = AXIS2_PLACEMENT_3D('',#38598,#38599,#38600); +#38598 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#38599 = DIRECTION('',(-0.,-1.,-0.)); +#38600 = DIRECTION('',(1.,-0.,0.)); +#38601 = ADVANCED_FACE('',(#38602),#38620,.T.); +#38602 = FACE_BOUND('',#38603,.F.); +#38603 = EDGE_LOOP('',(#38604,#38605,#38606,#38614)); +#38604 = ORIENTED_EDGE('',*,*,#33236,.F.); +#38605 = ORIENTED_EDGE('',*,*,#38591,.T.); +#38606 = ORIENTED_EDGE('',*,*,#38607,.T.); +#38607 = EDGE_CURVE('',#38584,#38608,#38610,.T.); +#38608 = VERTEX_POINT('',#38609); +#38609 = CARTESIAN_POINT('',(8.550000214576,-6.62,0.799997961521)); +#38610 = LINE('',#38611,#38612); +#38611 = CARTESIAN_POINT('',(8.550000214576,-5.72,0.799997961521)); +#38612 = VECTOR('',#38613,1.); +#38613 = DIRECTION('',(0.,-1.,0.)); +#38614 = ORIENTED_EDGE('',*,*,#38615,.F.); +#38615 = EDGE_CURVE('',#33229,#38608,#38616,.T.); +#38616 = LINE('',#38617,#38618); +#38617 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#38618 = VECTOR('',#38619,1.); +#38619 = DIRECTION('',(0.,0.,-1.)); +#38620 = PLANE('',#38621); +#38621 = AXIS2_PLACEMENT_3D('',#38622,#38623,#38624); +#38622 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#38623 = DIRECTION('',(1.,0.,0.)); +#38624 = DIRECTION('',(-0.,1.,0.)); +#38625 = ADVANCED_FACE('',(#38626),#38637,.T.); +#38626 = FACE_BOUND('',#38627,.F.); +#38627 = EDGE_LOOP('',(#38628,#38629,#38630,#38636)); +#38628 = ORIENTED_EDGE('',*,*,#33228,.F.); +#38629 = ORIENTED_EDGE('',*,*,#38615,.T.); +#38630 = ORIENTED_EDGE('',*,*,#38631,.T.); +#38631 = EDGE_CURVE('',#38608,#35971,#38632,.T.); +#38632 = LINE('',#38633,#38634); +#38633 = CARTESIAN_POINT('',(8.150000214577,-6.62,0.799998056888)); +#38634 = VECTOR('',#38635,1.); +#38635 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38636 = ORIENTED_EDGE('',*,*,#35978,.F.); +#38637 = PLANE('',#38638); +#38638 = AXIS2_PLACEMENT_3D('',#38639,#38640,#38641); +#38639 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#38640 = DIRECTION('',(0.,1.,0.)); +#38641 = DIRECTION('',(-1.,0.,0.)); +#38642 = ADVANCED_FACE('',(#38643),#38671,.T.); +#38643 = FACE_BOUND('',#38644,.T.); +#38644 = EDGE_LOOP('',(#38645,#38656,#38662,#38663,#38664,#38665)); +#38645 = ORIENTED_EDGE('',*,*,#38646,.F.); +#38646 = EDGE_CURVE('',#38647,#38649,#38651,.T.); +#38647 = VERTEX_POINT('',#38648); +#38648 = CARTESIAN_POINT('',(-9.,-7.715,0.8)); +#38649 = VERTEX_POINT('',#38650); +#38650 = CARTESIAN_POINT('',(-9.,-7.165,0.8)); +#38651 = CIRCLE('',#38652,0.275); +#38652 = AXIS2_PLACEMENT_3D('',#38653,#38654,#38655); +#38653 = CARTESIAN_POINT('',(-9.,-7.44,0.8)); +#38654 = DIRECTION('',(0.,0.,1.)); +#38655 = DIRECTION('',(1.,0.,-0.)); +#38656 = ORIENTED_EDGE('',*,*,#38657,.T.); +#38657 = EDGE_CURVE('',#38647,#32653,#38658,.T.); +#38658 = LINE('',#38659,#38660); +#38659 = CARTESIAN_POINT('',(-9.,-7.715,0.8)); +#38660 = VECTOR('',#38661,1.); +#38661 = DIRECTION('',(0.,-1.,0.)); +#38662 = ORIENTED_EDGE('',*,*,#32652,.F.); +#38663 = ORIENTED_EDGE('',*,*,#32644,.F.); +#38664 = ORIENTED_EDGE('',*,*,#32636,.F.); +#38665 = ORIENTED_EDGE('',*,*,#38666,.T.); +#38666 = EDGE_CURVE('',#32629,#38649,#38667,.T.); +#38667 = LINE('',#38668,#38669); +#38668 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#38669 = VECTOR('',#38670,1.); +#38670 = DIRECTION('',(0.,-1.,0.)); +#38671 = PLANE('',#38672); +#38672 = AXIS2_PLACEMENT_3D('',#38673,#38674,#38675); +#38673 = CARTESIAN_POINT('',(-8.571261896074,-7.44,0.8)); +#38674 = DIRECTION('',(0.,0.,1.)); +#38675 = DIRECTION('',(1.,0.,-0.)); +#38676 = ADVANCED_FACE('',(#38677),#38695,.T.); +#38677 = FACE_BOUND('',#38678,.F.); +#38678 = EDGE_LOOP('',(#38679,#38680,#38681,#38689)); +#38679 = ORIENTED_EDGE('',*,*,#33212,.F.); +#38680 = ORIENTED_EDGE('',*,*,#35985,.T.); +#38681 = ORIENTED_EDGE('',*,*,#38682,.T.); +#38682 = EDGE_CURVE('',#35986,#38683,#38685,.T.); +#38683 = VERTEX_POINT('',#38684); +#38684 = CARTESIAN_POINT('',(8.550000214576,-6.99,0.799997961521)); +#38685 = LINE('',#38686,#38687); +#38686 = CARTESIAN_POINT('',(9.000000214576,-6.99,0.799997854233)); +#38687 = VECTOR('',#38688,1.); +#38688 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38689 = ORIENTED_EDGE('',*,*,#38690,.F.); +#38690 = EDGE_CURVE('',#33205,#38683,#38691,.T.); +#38691 = LINE('',#38692,#38693); +#38692 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#38693 = VECTOR('',#38694,1.); +#38694 = DIRECTION('',(0.,0.,-1.)); +#38695 = PLANE('',#38696); +#38696 = AXIS2_PLACEMENT_3D('',#38697,#38698,#38699); +#38697 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#38698 = DIRECTION('',(-0.,-1.,-0.)); +#38699 = DIRECTION('',(1.,-0.,0.)); +#38700 = ADVANCED_FACE('',(#38701),#38719,.T.); +#38701 = FACE_BOUND('',#38702,.F.); +#38702 = EDGE_LOOP('',(#38703,#38704,#38705,#38713)); +#38703 = ORIENTED_EDGE('',*,*,#33204,.F.); +#38704 = ORIENTED_EDGE('',*,*,#38690,.T.); +#38705 = ORIENTED_EDGE('',*,*,#38706,.T.); +#38706 = EDGE_CURVE('',#38683,#38707,#38709,.T.); +#38707 = VERTEX_POINT('',#38708); +#38708 = CARTESIAN_POINT('',(8.550000214576,-7.89,0.799997961521)); +#38709 = LINE('',#38710,#38711); +#38710 = CARTESIAN_POINT('',(8.550000214576,-6.99,0.799997961521)); +#38711 = VECTOR('',#38712,1.); +#38712 = DIRECTION('',(0.,-1.,0.)); +#38713 = ORIENTED_EDGE('',*,*,#38714,.F.); +#38714 = EDGE_CURVE('',#33197,#38707,#38715,.T.); +#38715 = LINE('',#38716,#38717); +#38716 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#38717 = VECTOR('',#38718,1.); +#38718 = DIRECTION('',(0.,0.,-1.)); +#38719 = PLANE('',#38720); +#38720 = AXIS2_PLACEMENT_3D('',#38721,#38722,#38723); +#38721 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#38722 = DIRECTION('',(1.,0.,0.)); +#38723 = DIRECTION('',(-0.,1.,0.)); +#38724 = ADVANCED_FACE('',(#38725),#38736,.T.); +#38725 = FACE_BOUND('',#38726,.F.); +#38726 = EDGE_LOOP('',(#38727,#38728,#38729,#38735)); +#38727 = ORIENTED_EDGE('',*,*,#33196,.F.); +#38728 = ORIENTED_EDGE('',*,*,#38714,.T.); +#38729 = ORIENTED_EDGE('',*,*,#38730,.T.); +#38730 = EDGE_CURVE('',#38707,#36180,#38731,.T.); +#38731 = LINE('',#38732,#38733); +#38732 = CARTESIAN_POINT('',(8.150000214577,-7.89,0.799998056888)); +#38733 = VECTOR('',#38734,1.); +#38734 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38735 = ORIENTED_EDGE('',*,*,#36187,.F.); +#38736 = PLANE('',#38737); +#38737 = AXIS2_PLACEMENT_3D('',#38738,#38739,#38740); +#38738 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#38739 = DIRECTION('',(0.,1.,0.)); +#38740 = DIRECTION('',(-1.,0.,0.)); +#38741 = ADVANCED_FACE('',(#38742),#38770,.T.); +#38742 = FACE_BOUND('',#38743,.T.); +#38743 = EDGE_LOOP('',(#38744,#38755,#38761,#38762,#38763,#38764)); +#38744 = ORIENTED_EDGE('',*,*,#38745,.F.); +#38745 = EDGE_CURVE('',#38746,#38748,#38750,.T.); +#38746 = VERTEX_POINT('',#38747); +#38747 = CARTESIAN_POINT('',(-9.,-8.985,0.8)); +#38748 = VERTEX_POINT('',#38749); +#38749 = CARTESIAN_POINT('',(-9.,-8.435,0.8)); +#38750 = CIRCLE('',#38751,0.275); +#38751 = AXIS2_PLACEMENT_3D('',#38752,#38753,#38754); +#38752 = CARTESIAN_POINT('',(-9.,-8.71,0.8)); +#38753 = DIRECTION('',(0.,0.,1.)); +#38754 = DIRECTION('',(1.,0.,-0.)); +#38755 = ORIENTED_EDGE('',*,*,#38756,.T.); +#38756 = EDGE_CURVE('',#38746,#32685,#38757,.T.); +#38757 = LINE('',#38758,#38759); +#38758 = CARTESIAN_POINT('',(-9.,-8.985,0.8)); +#38759 = VECTOR('',#38760,1.); +#38760 = DIRECTION('',(0.,-1.,0.)); +#38761 = ORIENTED_EDGE('',*,*,#32684,.F.); +#38762 = ORIENTED_EDGE('',*,*,#32676,.F.); +#38763 = ORIENTED_EDGE('',*,*,#32668,.F.); +#38764 = ORIENTED_EDGE('',*,*,#38765,.T.); +#38765 = EDGE_CURVE('',#32661,#38748,#38766,.T.); +#38766 = LINE('',#38767,#38768); +#38767 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#38768 = VECTOR('',#38769,1.); +#38769 = DIRECTION('',(0.,-1.,0.)); +#38770 = PLANE('',#38771); +#38771 = AXIS2_PLACEMENT_3D('',#38772,#38773,#38774); +#38772 = CARTESIAN_POINT('',(-8.571261896074,-8.71,0.8)); +#38773 = DIRECTION('',(0.,0.,1.)); +#38774 = DIRECTION('',(1.,0.,-0.)); +#38775 = ADVANCED_FACE('',(#38776),#38794,.T.); +#38776 = FACE_BOUND('',#38777,.F.); +#38777 = EDGE_LOOP('',(#38778,#38779,#38780,#38788)); +#38778 = ORIENTED_EDGE('',*,*,#33180,.F.); +#38779 = ORIENTED_EDGE('',*,*,#36194,.T.); +#38780 = ORIENTED_EDGE('',*,*,#38781,.T.); +#38781 = EDGE_CURVE('',#36195,#38782,#38784,.T.); +#38782 = VERTEX_POINT('',#38783); +#38783 = CARTESIAN_POINT('',(8.550000214576,-8.26,0.799997961521)); +#38784 = LINE('',#38785,#38786); +#38785 = CARTESIAN_POINT('',(9.000000214576,-8.26,0.799997854233)); +#38786 = VECTOR('',#38787,1.); +#38787 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38788 = ORIENTED_EDGE('',*,*,#38789,.F.); +#38789 = EDGE_CURVE('',#33173,#38782,#38790,.T.); +#38790 = LINE('',#38791,#38792); +#38791 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#38792 = VECTOR('',#38793,1.); +#38793 = DIRECTION('',(0.,0.,-1.)); +#38794 = PLANE('',#38795); +#38795 = AXIS2_PLACEMENT_3D('',#38796,#38797,#38798); +#38796 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#38797 = DIRECTION('',(-0.,-1.,-0.)); +#38798 = DIRECTION('',(1.,-0.,0.)); +#38799 = ADVANCED_FACE('',(#38800),#38818,.T.); +#38800 = FACE_BOUND('',#38801,.F.); +#38801 = EDGE_LOOP('',(#38802,#38803,#38804,#38812)); +#38802 = ORIENTED_EDGE('',*,*,#33172,.F.); +#38803 = ORIENTED_EDGE('',*,*,#38789,.T.); +#38804 = ORIENTED_EDGE('',*,*,#38805,.T.); +#38805 = EDGE_CURVE('',#38782,#38806,#38808,.T.); +#38806 = VERTEX_POINT('',#38807); +#38807 = CARTESIAN_POINT('',(8.550000214576,-9.16,0.799997961521)); +#38808 = LINE('',#38809,#38810); +#38809 = CARTESIAN_POINT('',(8.550000214576,-8.26,0.799997961521)); +#38810 = VECTOR('',#38811,1.); +#38811 = DIRECTION('',(0.,-1.,0.)); +#38812 = ORIENTED_EDGE('',*,*,#38813,.F.); +#38813 = EDGE_CURVE('',#33165,#38806,#38814,.T.); +#38814 = LINE('',#38815,#38816); +#38815 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#38816 = VECTOR('',#38817,1.); +#38817 = DIRECTION('',(0.,0.,-1.)); +#38818 = PLANE('',#38819); +#38819 = AXIS2_PLACEMENT_3D('',#38820,#38821,#38822); +#38820 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#38821 = DIRECTION('',(1.,0.,0.)); +#38822 = DIRECTION('',(-0.,1.,0.)); +#38823 = ADVANCED_FACE('',(#38824),#38835,.T.); +#38824 = FACE_BOUND('',#38825,.F.); +#38825 = EDGE_LOOP('',(#38826,#38827,#38828,#38834)); +#38826 = ORIENTED_EDGE('',*,*,#33164,.F.); +#38827 = ORIENTED_EDGE('',*,*,#38813,.T.); +#38828 = ORIENTED_EDGE('',*,*,#38829,.T.); +#38829 = EDGE_CURVE('',#38806,#36389,#38830,.T.); +#38830 = LINE('',#38831,#38832); +#38831 = CARTESIAN_POINT('',(8.150000214577,-9.16,0.799998056888)); +#38832 = VECTOR('',#38833,1.); +#38833 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38834 = ORIENTED_EDGE('',*,*,#36396,.F.); +#38835 = PLANE('',#38836); +#38836 = AXIS2_PLACEMENT_3D('',#38837,#38838,#38839); +#38837 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#38838 = DIRECTION('',(0.,1.,0.)); +#38839 = DIRECTION('',(-1.,0.,0.)); +#38840 = ADVANCED_FACE('',(#38841),#38869,.T.); +#38841 = FACE_BOUND('',#38842,.T.); +#38842 = EDGE_LOOP('',(#38843,#38854,#38860,#38861,#38862,#38863)); +#38843 = ORIENTED_EDGE('',*,*,#38844,.F.); +#38844 = EDGE_CURVE('',#38845,#38847,#38849,.T.); +#38845 = VERTEX_POINT('',#38846); +#38846 = CARTESIAN_POINT('',(-9.,-10.255,0.8)); +#38847 = VERTEX_POINT('',#38848); +#38848 = CARTESIAN_POINT('',(-9.,-9.705,0.8)); +#38849 = CIRCLE('',#38850,0.275); +#38850 = AXIS2_PLACEMENT_3D('',#38851,#38852,#38853); +#38851 = CARTESIAN_POINT('',(-9.,-9.98,0.8)); +#38852 = DIRECTION('',(0.,0.,1.)); +#38853 = DIRECTION('',(1.,0.,-0.)); +#38854 = ORIENTED_EDGE('',*,*,#38855,.T.); +#38855 = EDGE_CURVE('',#38845,#32717,#38856,.T.); +#38856 = LINE('',#38857,#38858); +#38857 = CARTESIAN_POINT('',(-9.,-10.255,0.8)); +#38858 = VECTOR('',#38859,1.); +#38859 = DIRECTION('',(0.,-1.,0.)); +#38860 = ORIENTED_EDGE('',*,*,#32716,.F.); +#38861 = ORIENTED_EDGE('',*,*,#32708,.F.); +#38862 = ORIENTED_EDGE('',*,*,#32700,.F.); +#38863 = ORIENTED_EDGE('',*,*,#38864,.T.); +#38864 = EDGE_CURVE('',#32693,#38847,#38865,.T.); +#38865 = LINE('',#38866,#38867); +#38866 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#38867 = VECTOR('',#38868,1.); +#38868 = DIRECTION('',(0.,-1.,0.)); +#38869 = PLANE('',#38870); +#38870 = AXIS2_PLACEMENT_3D('',#38871,#38872,#38873); +#38871 = CARTESIAN_POINT('',(-8.571261896074,-9.98,0.8)); +#38872 = DIRECTION('',(0.,0.,1.)); +#38873 = DIRECTION('',(1.,0.,-0.)); +#38874 = ADVANCED_FACE('',(#38875),#38893,.T.); +#38875 = FACE_BOUND('',#38876,.F.); +#38876 = EDGE_LOOP('',(#38877,#38878,#38879,#38887)); +#38877 = ORIENTED_EDGE('',*,*,#33148,.F.); +#38878 = ORIENTED_EDGE('',*,*,#36403,.T.); +#38879 = ORIENTED_EDGE('',*,*,#38880,.T.); +#38880 = EDGE_CURVE('',#36404,#38881,#38883,.T.); +#38881 = VERTEX_POINT('',#38882); +#38882 = CARTESIAN_POINT('',(8.550000214576,-9.53,0.799997961521)); +#38883 = LINE('',#38884,#38885); +#38884 = CARTESIAN_POINT('',(9.000000214576,-9.53,0.799997854233)); +#38885 = VECTOR('',#38886,1.); +#38886 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38887 = ORIENTED_EDGE('',*,*,#38888,.F.); +#38888 = EDGE_CURVE('',#33141,#38881,#38889,.T.); +#38889 = LINE('',#38890,#38891); +#38890 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#38891 = VECTOR('',#38892,1.); +#38892 = DIRECTION('',(0.,0.,-1.)); +#38893 = PLANE('',#38894); +#38894 = AXIS2_PLACEMENT_3D('',#38895,#38896,#38897); +#38895 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#38896 = DIRECTION('',(-0.,-1.,-0.)); +#38897 = DIRECTION('',(1.,-0.,0.)); +#38898 = ADVANCED_FACE('',(#38899),#38917,.T.); +#38899 = FACE_BOUND('',#38900,.F.); +#38900 = EDGE_LOOP('',(#38901,#38902,#38903,#38911)); +#38901 = ORIENTED_EDGE('',*,*,#33140,.F.); +#38902 = ORIENTED_EDGE('',*,*,#38888,.T.); +#38903 = ORIENTED_EDGE('',*,*,#38904,.T.); +#38904 = EDGE_CURVE('',#38881,#38905,#38907,.T.); +#38905 = VERTEX_POINT('',#38906); +#38906 = CARTESIAN_POINT('',(8.550000214576,-10.43,0.799997961521)); +#38907 = LINE('',#38908,#38909); +#38908 = CARTESIAN_POINT('',(8.550000214576,-9.53,0.799997961521)); +#38909 = VECTOR('',#38910,1.); +#38910 = DIRECTION('',(0.,-1.,0.)); +#38911 = ORIENTED_EDGE('',*,*,#38912,.F.); +#38912 = EDGE_CURVE('',#33133,#38905,#38913,.T.); +#38913 = LINE('',#38914,#38915); +#38914 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#38915 = VECTOR('',#38916,1.); +#38916 = DIRECTION('',(0.,0.,-1.)); +#38917 = PLANE('',#38918); +#38918 = AXIS2_PLACEMENT_3D('',#38919,#38920,#38921); +#38919 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#38920 = DIRECTION('',(1.,0.,0.)); +#38921 = DIRECTION('',(-0.,1.,0.)); +#38922 = ADVANCED_FACE('',(#38923),#38934,.T.); +#38923 = FACE_BOUND('',#38924,.F.); +#38924 = EDGE_LOOP('',(#38925,#38926,#38927,#38933)); +#38925 = ORIENTED_EDGE('',*,*,#33132,.F.); +#38926 = ORIENTED_EDGE('',*,*,#38912,.T.); +#38927 = ORIENTED_EDGE('',*,*,#38928,.T.); +#38928 = EDGE_CURVE('',#38905,#36598,#38929,.T.); +#38929 = LINE('',#38930,#38931); +#38930 = CARTESIAN_POINT('',(8.150000214577,-10.43,0.799998056888)); +#38931 = VECTOR('',#38932,1.); +#38932 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#38933 = ORIENTED_EDGE('',*,*,#36605,.F.); +#38934 = PLANE('',#38935); +#38935 = AXIS2_PLACEMENT_3D('',#38936,#38937,#38938); +#38936 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#38937 = DIRECTION('',(0.,1.,0.)); +#38938 = DIRECTION('',(-1.,0.,0.)); +#38939 = ADVANCED_FACE('',(#38940),#38968,.T.); +#38940 = FACE_BOUND('',#38941,.T.); +#38941 = EDGE_LOOP('',(#38942,#38953,#38959,#38960,#38961,#38962)); +#38942 = ORIENTED_EDGE('',*,*,#38943,.F.); +#38943 = EDGE_CURVE('',#38944,#38946,#38948,.T.); +#38944 = VERTEX_POINT('',#38945); +#38945 = CARTESIAN_POINT('',(-9.,-11.525,0.8)); +#38946 = VERTEX_POINT('',#38947); +#38947 = CARTESIAN_POINT('',(-9.,-10.975,0.8)); +#38948 = CIRCLE('',#38949,0.275); +#38949 = AXIS2_PLACEMENT_3D('',#38950,#38951,#38952); +#38950 = CARTESIAN_POINT('',(-9.,-11.25,0.8)); +#38951 = DIRECTION('',(0.,0.,1.)); +#38952 = DIRECTION('',(1.,0.,-0.)); +#38953 = ORIENTED_EDGE('',*,*,#38954,.T.); +#38954 = EDGE_CURVE('',#38944,#32749,#38955,.T.); +#38955 = LINE('',#38956,#38957); +#38956 = CARTESIAN_POINT('',(-9.,-11.525,0.8)); +#38957 = VECTOR('',#38958,1.); +#38958 = DIRECTION('',(0.,-1.,0.)); +#38959 = ORIENTED_EDGE('',*,*,#32748,.F.); +#38960 = ORIENTED_EDGE('',*,*,#32740,.F.); +#38961 = ORIENTED_EDGE('',*,*,#32732,.F.); +#38962 = ORIENTED_EDGE('',*,*,#38963,.T.); +#38963 = EDGE_CURVE('',#32725,#38946,#38964,.T.); +#38964 = LINE('',#38965,#38966); +#38965 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#38966 = VECTOR('',#38967,1.); +#38967 = DIRECTION('',(0.,-1.,0.)); +#38968 = PLANE('',#38969); +#38969 = AXIS2_PLACEMENT_3D('',#38970,#38971,#38972); +#38970 = CARTESIAN_POINT('',(-8.571261896074,-11.25,0.8)); +#38971 = DIRECTION('',(0.,0.,1.)); +#38972 = DIRECTION('',(1.,0.,-0.)); +#38973 = ADVANCED_FACE('',(#38974),#38992,.T.); +#38974 = FACE_BOUND('',#38975,.F.); +#38975 = EDGE_LOOP('',(#38976,#38977,#38978,#38986)); +#38976 = ORIENTED_EDGE('',*,*,#33116,.F.); +#38977 = ORIENTED_EDGE('',*,*,#36612,.T.); +#38978 = ORIENTED_EDGE('',*,*,#38979,.T.); +#38979 = EDGE_CURVE('',#36613,#38980,#38982,.T.); +#38980 = VERTEX_POINT('',#38981); +#38981 = CARTESIAN_POINT('',(8.550000214576,-10.8,0.799997961521)); +#38982 = LINE('',#38983,#38984); +#38983 = CARTESIAN_POINT('',(9.000000214576,-10.8,0.799997854233)); +#38984 = VECTOR('',#38985,1.); +#38985 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#38986 = ORIENTED_EDGE('',*,*,#38987,.F.); +#38987 = EDGE_CURVE('',#33109,#38980,#38988,.T.); +#38988 = LINE('',#38989,#38990); +#38989 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#38990 = VECTOR('',#38991,1.); +#38991 = DIRECTION('',(0.,0.,-1.)); +#38992 = PLANE('',#38993); +#38993 = AXIS2_PLACEMENT_3D('',#38994,#38995,#38996); +#38994 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#38995 = DIRECTION('',(-0.,-1.,-0.)); +#38996 = DIRECTION('',(1.,-0.,0.)); +#38997 = ADVANCED_FACE('',(#38998),#39016,.T.); +#38998 = FACE_BOUND('',#38999,.F.); +#38999 = EDGE_LOOP('',(#39000,#39001,#39002,#39010)); +#39000 = ORIENTED_EDGE('',*,*,#33108,.F.); +#39001 = ORIENTED_EDGE('',*,*,#38987,.T.); +#39002 = ORIENTED_EDGE('',*,*,#39003,.T.); +#39003 = EDGE_CURVE('',#38980,#39004,#39006,.T.); +#39004 = VERTEX_POINT('',#39005); +#39005 = CARTESIAN_POINT('',(8.550000214576,-11.7,0.799997961521)); +#39006 = LINE('',#39007,#39008); +#39007 = CARTESIAN_POINT('',(8.550000214576,-10.8,0.799997961521)); +#39008 = VECTOR('',#39009,1.); +#39009 = DIRECTION('',(0.,-1.,0.)); +#39010 = ORIENTED_EDGE('',*,*,#39011,.F.); +#39011 = EDGE_CURVE('',#33101,#39004,#39012,.T.); +#39012 = LINE('',#39013,#39014); +#39013 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#39014 = VECTOR('',#39015,1.); +#39015 = DIRECTION('',(0.,0.,-1.)); +#39016 = PLANE('',#39017); +#39017 = AXIS2_PLACEMENT_3D('',#39018,#39019,#39020); +#39018 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#39019 = DIRECTION('',(1.,0.,0.)); +#39020 = DIRECTION('',(-0.,1.,0.)); +#39021 = ADVANCED_FACE('',(#39022),#39033,.T.); +#39022 = FACE_BOUND('',#39023,.F.); +#39023 = EDGE_LOOP('',(#39024,#39025,#39026,#39032)); +#39024 = ORIENTED_EDGE('',*,*,#33100,.F.); +#39025 = ORIENTED_EDGE('',*,*,#39011,.T.); +#39026 = ORIENTED_EDGE('',*,*,#39027,.T.); +#39027 = EDGE_CURVE('',#39004,#36799,#39028,.T.); +#39028 = LINE('',#39029,#39030); +#39029 = CARTESIAN_POINT('',(8.150000214577,-11.7,0.799998056888)); +#39030 = VECTOR('',#39031,1.); +#39031 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#39032 = ORIENTED_EDGE('',*,*,#36806,.F.); +#39033 = PLANE('',#39034); +#39034 = AXIS2_PLACEMENT_3D('',#39035,#39036,#39037); +#39035 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#39036 = DIRECTION('',(0.,1.,0.)); +#39037 = DIRECTION('',(-1.,0.,0.)); +#39038 = ADVANCED_FACE('',(#39039),#39067,.T.); +#39039 = FACE_BOUND('',#39040,.T.); +#39040 = EDGE_LOOP('',(#39041,#39052,#39058,#39059,#39060,#39061)); +#39041 = ORIENTED_EDGE('',*,*,#39042,.F.); +#39042 = EDGE_CURVE('',#39043,#39045,#39047,.T.); +#39043 = VERTEX_POINT('',#39044); +#39044 = CARTESIAN_POINT('',(-5.44,-12.75,0.8)); +#39045 = VERTEX_POINT('',#39046); +#39046 = CARTESIAN_POINT('',(-5.99,-12.75,0.8)); +#39047 = CIRCLE('',#39048,0.275); +#39048 = AXIS2_PLACEMENT_3D('',#39049,#39050,#39051); +#39049 = CARTESIAN_POINT('',(-5.715,-12.75,0.8)); +#39050 = DIRECTION('',(0.,-0.,1.)); +#39051 = DIRECTION('',(0.,1.,0.)); +#39052 = ORIENTED_EDGE('',*,*,#39053,.T.); +#39053 = EDGE_CURVE('',#39043,#32789,#39054,.T.); +#39054 = LINE('',#39055,#39056); +#39055 = CARTESIAN_POINT('',(-5.44,-12.75,0.8)); +#39056 = VECTOR('',#39057,1.); +#39057 = DIRECTION('',(1.,0.,0.)); +#39058 = ORIENTED_EDGE('',*,*,#32788,.F.); +#39059 = ORIENTED_EDGE('',*,*,#32780,.F.); +#39060 = ORIENTED_EDGE('',*,*,#32772,.F.); +#39061 = ORIENTED_EDGE('',*,*,#39062,.T.); +#39062 = EDGE_CURVE('',#32765,#39045,#39063,.T.); +#39063 = LINE('',#39064,#39065); +#39064 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#39065 = VECTOR('',#39066,1.); +#39066 = DIRECTION('',(1.,0.,0.)); +#39067 = PLANE('',#39068); +#39068 = AXIS2_PLACEMENT_3D('',#39069,#39070,#39071); +#39069 = CARTESIAN_POINT('',(-5.715,-12.32126189607,0.8)); +#39070 = DIRECTION('',(0.,0.,1.)); +#39071 = DIRECTION('',(0.,1.,0.)); +#39072 = ADVANCED_FACE('',(#39073),#39101,.T.); +#39073 = FACE_BOUND('',#39074,.T.); +#39074 = EDGE_LOOP('',(#39075,#39086,#39092,#39093,#39094,#39095)); +#39075 = ORIENTED_EDGE('',*,*,#39076,.F.); +#39076 = EDGE_CURVE('',#39077,#39079,#39081,.T.); +#39077 = VERTEX_POINT('',#39078); +#39078 = CARTESIAN_POINT('',(5.99,-12.75,0.8)); +#39079 = VERTEX_POINT('',#39080); +#39080 = CARTESIAN_POINT('',(5.44,-12.75,0.8)); +#39081 = CIRCLE('',#39082,0.275); +#39082 = AXIS2_PLACEMENT_3D('',#39083,#39084,#39085); +#39083 = CARTESIAN_POINT('',(5.715,-12.75,0.8)); +#39084 = DIRECTION('',(0.,-0.,1.)); +#39085 = DIRECTION('',(0.,1.,0.)); +#39086 = ORIENTED_EDGE('',*,*,#39087,.T.); +#39087 = EDGE_CURVE('',#39077,#33077,#39088,.T.); +#39088 = LINE('',#39089,#39090); +#39089 = CARTESIAN_POINT('',(5.99,-12.75,0.8)); +#39090 = VECTOR('',#39091,1.); +#39091 = DIRECTION('',(1.,0.,0.)); +#39092 = ORIENTED_EDGE('',*,*,#33076,.T.); +#39093 = ORIENTED_EDGE('',*,*,#33068,.T.); +#39094 = ORIENTED_EDGE('',*,*,#33060,.T.); +#39095 = ORIENTED_EDGE('',*,*,#39096,.T.); +#39096 = EDGE_CURVE('',#33053,#39079,#39097,.T.); +#39097 = LINE('',#39098,#39099); +#39098 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#39099 = VECTOR('',#39100,1.); +#39100 = DIRECTION('',(1.,0.,0.)); +#39101 = PLANE('',#39102); +#39102 = AXIS2_PLACEMENT_3D('',#39103,#39104,#39105); +#39103 = CARTESIAN_POINT('',(5.715,-12.32126189607,0.8)); +#39104 = DIRECTION('',(0.,0.,1.)); +#39105 = DIRECTION('',(0.,1.,0.)); +#39106 = ADVANCED_FACE('',(#39107),#39135,.T.); +#39107 = FACE_BOUND('',#39108,.T.); +#39108 = EDGE_LOOP('',(#39109,#39120,#39126,#39127,#39128,#39129)); +#39109 = ORIENTED_EDGE('',*,*,#39110,.F.); +#39110 = EDGE_CURVE('',#39111,#39113,#39115,.T.); +#39111 = VERTEX_POINT('',#39112); +#39112 = CARTESIAN_POINT('',(-4.17,-12.75,0.8)); +#39113 = VERTEX_POINT('',#39114); +#39114 = CARTESIAN_POINT('',(-4.72,-12.75,0.8)); +#39115 = CIRCLE('',#39116,0.275); +#39116 = AXIS2_PLACEMENT_3D('',#39117,#39118,#39119); +#39117 = CARTESIAN_POINT('',(-4.445,-12.75,0.8)); +#39118 = DIRECTION('',(0.,-0.,1.)); +#39119 = DIRECTION('',(0.,1.,0.)); +#39120 = ORIENTED_EDGE('',*,*,#39121,.T.); +#39121 = EDGE_CURVE('',#39111,#32821,#39122,.T.); +#39122 = LINE('',#39123,#39124); +#39123 = CARTESIAN_POINT('',(-4.17,-12.75,0.8)); +#39124 = VECTOR('',#39125,1.); +#39125 = DIRECTION('',(1.,0.,0.)); +#39126 = ORIENTED_EDGE('',*,*,#32820,.F.); +#39127 = ORIENTED_EDGE('',*,*,#32812,.F.); +#39128 = ORIENTED_EDGE('',*,*,#32804,.F.); +#39129 = ORIENTED_EDGE('',*,*,#39130,.T.); +#39130 = EDGE_CURVE('',#32797,#39113,#39131,.T.); +#39131 = LINE('',#39132,#39133); +#39132 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#39133 = VECTOR('',#39134,1.); +#39134 = DIRECTION('',(1.,0.,0.)); +#39135 = PLANE('',#39136); +#39136 = AXIS2_PLACEMENT_3D('',#39137,#39138,#39139); +#39137 = CARTESIAN_POINT('',(-4.445,-12.32126189607,0.8)); +#39138 = DIRECTION('',(0.,0.,1.)); +#39139 = DIRECTION('',(0.,1.,0.)); +#39140 = ADVANCED_FACE('',(#39141),#39169,.T.); +#39141 = FACE_BOUND('',#39142,.T.); +#39142 = EDGE_LOOP('',(#39143,#39154,#39160,#39161,#39162,#39163)); +#39143 = ORIENTED_EDGE('',*,*,#39144,.F.); +#39144 = EDGE_CURVE('',#39145,#39147,#39149,.T.); +#39145 = VERTEX_POINT('',#39146); +#39146 = CARTESIAN_POINT('',(4.72,-12.75,0.8)); +#39147 = VERTEX_POINT('',#39148); +#39148 = CARTESIAN_POINT('',(4.17,-12.75,0.8)); +#39149 = CIRCLE('',#39150,0.275); +#39150 = AXIS2_PLACEMENT_3D('',#39151,#39152,#39153); +#39151 = CARTESIAN_POINT('',(4.445,-12.75,0.8)); +#39152 = DIRECTION('',(0.,-0.,1.)); +#39153 = DIRECTION('',(0.,1.,0.)); +#39154 = ORIENTED_EDGE('',*,*,#39155,.T.); +#39155 = EDGE_CURVE('',#39145,#33045,#39156,.T.); +#39156 = LINE('',#39157,#39158); +#39157 = CARTESIAN_POINT('',(4.72,-12.75,0.8)); +#39158 = VECTOR('',#39159,1.); +#39159 = DIRECTION('',(1.,0.,0.)); +#39160 = ORIENTED_EDGE('',*,*,#33044,.T.); +#39161 = ORIENTED_EDGE('',*,*,#33036,.T.); +#39162 = ORIENTED_EDGE('',*,*,#33028,.T.); +#39163 = ORIENTED_EDGE('',*,*,#39164,.T.); +#39164 = EDGE_CURVE('',#33021,#39147,#39165,.T.); +#39165 = LINE('',#39166,#39167); +#39166 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#39167 = VECTOR('',#39168,1.); +#39168 = DIRECTION('',(1.,0.,0.)); +#39169 = PLANE('',#39170); +#39170 = AXIS2_PLACEMENT_3D('',#39171,#39172,#39173); +#39171 = CARTESIAN_POINT('',(4.445,-12.32126189607,0.8)); +#39172 = DIRECTION('',(0.,0.,1.)); +#39173 = DIRECTION('',(0.,1.,0.)); +#39174 = ADVANCED_FACE('',(#39175),#39203,.T.); +#39175 = FACE_BOUND('',#39176,.T.); +#39176 = EDGE_LOOP('',(#39177,#39188,#39194,#39195,#39196,#39197)); +#39177 = ORIENTED_EDGE('',*,*,#39178,.F.); +#39178 = EDGE_CURVE('',#39179,#39181,#39183,.T.); +#39179 = VERTEX_POINT('',#39180); +#39180 = CARTESIAN_POINT('',(-2.9,-12.75,0.8)); +#39181 = VERTEX_POINT('',#39182); +#39182 = CARTESIAN_POINT('',(-3.45,-12.75,0.8)); +#39183 = CIRCLE('',#39184,0.275); +#39184 = AXIS2_PLACEMENT_3D('',#39185,#39186,#39187); +#39185 = CARTESIAN_POINT('',(-3.175,-12.75,0.8)); +#39186 = DIRECTION('',(0.,-0.,1.)); +#39187 = DIRECTION('',(0.,1.,0.)); +#39188 = ORIENTED_EDGE('',*,*,#39189,.T.); +#39189 = EDGE_CURVE('',#39179,#32853,#39190,.T.); +#39190 = LINE('',#39191,#39192); +#39191 = CARTESIAN_POINT('',(-2.9,-12.75,0.8)); +#39192 = VECTOR('',#39193,1.); +#39193 = DIRECTION('',(1.,0.,0.)); +#39194 = ORIENTED_EDGE('',*,*,#32852,.F.); +#39195 = ORIENTED_EDGE('',*,*,#32844,.F.); +#39196 = ORIENTED_EDGE('',*,*,#32836,.F.); +#39197 = ORIENTED_EDGE('',*,*,#39198,.T.); +#39198 = EDGE_CURVE('',#32829,#39181,#39199,.T.); +#39199 = LINE('',#39200,#39201); +#39200 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#39201 = VECTOR('',#39202,1.); +#39202 = DIRECTION('',(1.,0.,0.)); +#39203 = PLANE('',#39204); +#39204 = AXIS2_PLACEMENT_3D('',#39205,#39206,#39207); +#39205 = CARTESIAN_POINT('',(-3.175,-12.32126189607,0.8)); +#39206 = DIRECTION('',(0.,0.,1.)); +#39207 = DIRECTION('',(0.,1.,0.)); +#39208 = ADVANCED_FACE('',(#39209),#39237,.T.); +#39209 = FACE_BOUND('',#39210,.T.); +#39210 = EDGE_LOOP('',(#39211,#39222,#39228,#39229,#39230,#39231)); +#39211 = ORIENTED_EDGE('',*,*,#39212,.F.); +#39212 = EDGE_CURVE('',#39213,#39215,#39217,.T.); +#39213 = VERTEX_POINT('',#39214); +#39214 = CARTESIAN_POINT('',(3.45,-12.75,0.8)); +#39215 = VERTEX_POINT('',#39216); +#39216 = CARTESIAN_POINT('',(2.9,-12.75,0.8)); +#39217 = CIRCLE('',#39218,0.275); +#39218 = AXIS2_PLACEMENT_3D('',#39219,#39220,#39221); +#39219 = CARTESIAN_POINT('',(3.175,-12.75,0.8)); +#39220 = DIRECTION('',(0.,-0.,1.)); +#39221 = DIRECTION('',(0.,1.,0.)); +#39222 = ORIENTED_EDGE('',*,*,#39223,.T.); +#39223 = EDGE_CURVE('',#39213,#33013,#39224,.T.); +#39224 = LINE('',#39225,#39226); +#39225 = CARTESIAN_POINT('',(3.45,-12.75,0.8)); +#39226 = VECTOR('',#39227,1.); +#39227 = DIRECTION('',(1.,0.,0.)); +#39228 = ORIENTED_EDGE('',*,*,#33012,.T.); +#39229 = ORIENTED_EDGE('',*,*,#33004,.T.); +#39230 = ORIENTED_EDGE('',*,*,#32996,.T.); +#39231 = ORIENTED_EDGE('',*,*,#39232,.T.); +#39232 = EDGE_CURVE('',#32989,#39215,#39233,.T.); +#39233 = LINE('',#39234,#39235); +#39234 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#39235 = VECTOR('',#39236,1.); +#39236 = DIRECTION('',(1.,0.,0.)); +#39237 = PLANE('',#39238); +#39238 = AXIS2_PLACEMENT_3D('',#39239,#39240,#39241); +#39239 = CARTESIAN_POINT('',(3.175,-12.32126189607,0.8)); +#39240 = DIRECTION('',(0.,0.,1.)); +#39241 = DIRECTION('',(0.,1.,0.)); +#39242 = ADVANCED_FACE('',(#39243),#39271,.T.); +#39243 = FACE_BOUND('',#39244,.T.); +#39244 = EDGE_LOOP('',(#39245,#39256,#39262,#39263,#39264,#39265)); +#39245 = ORIENTED_EDGE('',*,*,#39246,.F.); +#39246 = EDGE_CURVE('',#39247,#39249,#39251,.T.); +#39247 = VERTEX_POINT('',#39248); +#39248 = CARTESIAN_POINT('',(-1.63,-12.75,0.8)); +#39249 = VERTEX_POINT('',#39250); +#39250 = CARTESIAN_POINT('',(-2.18,-12.75,0.8)); +#39251 = CIRCLE('',#39252,0.275); +#39252 = AXIS2_PLACEMENT_3D('',#39253,#39254,#39255); +#39253 = CARTESIAN_POINT('',(-1.905,-12.75,0.8)); +#39254 = DIRECTION('',(0.,-0.,1.)); +#39255 = DIRECTION('',(0.,1.,0.)); +#39256 = ORIENTED_EDGE('',*,*,#39257,.T.); +#39257 = EDGE_CURVE('',#39247,#32885,#39258,.T.); +#39258 = LINE('',#39259,#39260); +#39259 = CARTESIAN_POINT('',(-1.63,-12.75,0.8)); +#39260 = VECTOR('',#39261,1.); +#39261 = DIRECTION('',(1.,0.,0.)); +#39262 = ORIENTED_EDGE('',*,*,#32884,.F.); +#39263 = ORIENTED_EDGE('',*,*,#32876,.F.); +#39264 = ORIENTED_EDGE('',*,*,#32868,.F.); +#39265 = ORIENTED_EDGE('',*,*,#39266,.T.); +#39266 = EDGE_CURVE('',#32861,#39249,#39267,.T.); +#39267 = LINE('',#39268,#39269); +#39268 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#39269 = VECTOR('',#39270,1.); +#39270 = DIRECTION('',(1.,0.,0.)); +#39271 = PLANE('',#39272); +#39272 = AXIS2_PLACEMENT_3D('',#39273,#39274,#39275); +#39273 = CARTESIAN_POINT('',(-1.905,-12.32126189607,0.8)); +#39274 = DIRECTION('',(0.,0.,1.)); +#39275 = DIRECTION('',(0.,1.,0.)); +#39276 = ADVANCED_FACE('',(#39277),#39305,.T.); +#39277 = FACE_BOUND('',#39278,.T.); +#39278 = EDGE_LOOP('',(#39279,#39290,#39296,#39297,#39298,#39299)); +#39279 = ORIENTED_EDGE('',*,*,#39280,.F.); +#39280 = EDGE_CURVE('',#39281,#39283,#39285,.T.); +#39281 = VERTEX_POINT('',#39282); +#39282 = CARTESIAN_POINT('',(2.18,-12.75,0.8)); +#39283 = VERTEX_POINT('',#39284); +#39284 = CARTESIAN_POINT('',(1.63,-12.75,0.8)); +#39285 = CIRCLE('',#39286,0.275); +#39286 = AXIS2_PLACEMENT_3D('',#39287,#39288,#39289); +#39287 = CARTESIAN_POINT('',(1.905,-12.75,0.8)); +#39288 = DIRECTION('',(0.,-0.,1.)); +#39289 = DIRECTION('',(0.,1.,0.)); +#39290 = ORIENTED_EDGE('',*,*,#39291,.T.); +#39291 = EDGE_CURVE('',#39281,#32981,#39292,.T.); +#39292 = LINE('',#39293,#39294); +#39293 = CARTESIAN_POINT('',(2.18,-12.75,0.8)); +#39294 = VECTOR('',#39295,1.); +#39295 = DIRECTION('',(1.,0.,0.)); +#39296 = ORIENTED_EDGE('',*,*,#32980,.T.); +#39297 = ORIENTED_EDGE('',*,*,#32972,.T.); +#39298 = ORIENTED_EDGE('',*,*,#32964,.T.); +#39299 = ORIENTED_EDGE('',*,*,#39300,.T.); +#39300 = EDGE_CURVE('',#32957,#39283,#39301,.T.); +#39301 = LINE('',#39302,#39303); +#39302 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#39303 = VECTOR('',#39304,1.); +#39304 = DIRECTION('',(1.,0.,0.)); +#39305 = PLANE('',#39306); +#39306 = AXIS2_PLACEMENT_3D('',#39307,#39308,#39309); +#39307 = CARTESIAN_POINT('',(1.905,-12.32126189607,0.8)); +#39308 = DIRECTION('',(0.,0.,1.)); +#39309 = DIRECTION('',(0.,1.,0.)); +#39310 = ADVANCED_FACE('',(#39311),#39339,.T.); +#39311 = FACE_BOUND('',#39312,.T.); +#39312 = EDGE_LOOP('',(#39313,#39324,#39330,#39331,#39332,#39333)); +#39313 = ORIENTED_EDGE('',*,*,#39314,.F.); +#39314 = EDGE_CURVE('',#39315,#39317,#39319,.T.); +#39315 = VERTEX_POINT('',#39316); +#39316 = CARTESIAN_POINT('',(-0.36,-12.75,0.8)); +#39317 = VERTEX_POINT('',#39318); +#39318 = CARTESIAN_POINT('',(-0.91,-12.75,0.8)); +#39319 = CIRCLE('',#39320,0.275); +#39320 = AXIS2_PLACEMENT_3D('',#39321,#39322,#39323); +#39321 = CARTESIAN_POINT('',(-0.635,-12.75,0.8)); +#39322 = DIRECTION('',(0.,-0.,1.)); +#39323 = DIRECTION('',(0.,1.,0.)); +#39324 = ORIENTED_EDGE('',*,*,#39325,.T.); +#39325 = EDGE_CURVE('',#39315,#32917,#39326,.T.); +#39326 = LINE('',#39327,#39328); +#39327 = CARTESIAN_POINT('',(-0.36,-12.75,0.8)); +#39328 = VECTOR('',#39329,1.); +#39329 = DIRECTION('',(1.,0.,0.)); +#39330 = ORIENTED_EDGE('',*,*,#32916,.F.); +#39331 = ORIENTED_EDGE('',*,*,#32908,.F.); +#39332 = ORIENTED_EDGE('',*,*,#32900,.F.); +#39333 = ORIENTED_EDGE('',*,*,#39334,.T.); +#39334 = EDGE_CURVE('',#32893,#39317,#39335,.T.); +#39335 = LINE('',#39336,#39337); +#39336 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#39337 = VECTOR('',#39338,1.); +#39338 = DIRECTION('',(1.,0.,0.)); +#39339 = PLANE('',#39340); +#39340 = AXIS2_PLACEMENT_3D('',#39341,#39342,#39343); +#39341 = CARTESIAN_POINT('',(-0.635,-12.32126189607,0.8)); +#39342 = DIRECTION('',(0.,0.,1.)); +#39343 = DIRECTION('',(0.,1.,0.)); +#39344 = ADVANCED_FACE('',(#39345),#39373,.T.); +#39345 = FACE_BOUND('',#39346,.T.); +#39346 = EDGE_LOOP('',(#39347,#39358,#39364,#39365,#39366,#39367)); +#39347 = ORIENTED_EDGE('',*,*,#39348,.F.); +#39348 = EDGE_CURVE('',#39349,#39351,#39353,.T.); +#39349 = VERTEX_POINT('',#39350); +#39350 = CARTESIAN_POINT('',(0.91,-12.75,0.8)); +#39351 = VERTEX_POINT('',#39352); +#39352 = CARTESIAN_POINT('',(0.36,-12.75,0.8)); +#39353 = CIRCLE('',#39354,0.275); +#39354 = AXIS2_PLACEMENT_3D('',#39355,#39356,#39357); +#39355 = CARTESIAN_POINT('',(0.635,-12.75,0.8)); +#39356 = DIRECTION('',(0.,-0.,1.)); +#39357 = DIRECTION('',(0.,1.,0.)); +#39358 = ORIENTED_EDGE('',*,*,#39359,.T.); +#39359 = EDGE_CURVE('',#39349,#32949,#39360,.T.); +#39360 = LINE('',#39361,#39362); +#39361 = CARTESIAN_POINT('',(0.91,-12.75,0.8)); +#39362 = VECTOR('',#39363,1.); +#39363 = DIRECTION('',(1.,0.,0.)); +#39364 = ORIENTED_EDGE('',*,*,#32948,.T.); +#39365 = ORIENTED_EDGE('',*,*,#32940,.T.); +#39366 = ORIENTED_EDGE('',*,*,#32932,.T.); +#39367 = ORIENTED_EDGE('',*,*,#39368,.T.); +#39368 = EDGE_CURVE('',#32925,#39351,#39369,.T.); +#39369 = LINE('',#39370,#39371); +#39370 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#39371 = VECTOR('',#39372,1.); +#39372 = DIRECTION('',(1.,0.,0.)); +#39373 = PLANE('',#39374); +#39374 = AXIS2_PLACEMENT_3D('',#39375,#39376,#39377); +#39375 = CARTESIAN_POINT('',(0.635,-12.32126189607,0.8)); +#39376 = DIRECTION('',(0.,0.,1.)); +#39377 = DIRECTION('',(0.,1.,0.)); +#39378 = ADVANCED_FACE('',(#39379),#39405,.T.); +#39379 = FACE_BOUND('',#39380,.T.); +#39380 = EDGE_LOOP('',(#39381,#39382,#39390,#39399)); +#39381 = ORIENTED_EDGE('',*,*,#33541,.T.); +#39382 = ORIENTED_EDGE('',*,*,#39383,.T.); +#39383 = EDGE_CURVE('',#33544,#39384,#39386,.T.); +#39384 = VERTEX_POINT('',#39385); +#39385 = CARTESIAN_POINT('',(-7.9,5.65,2.85)); +#39386 = LINE('',#39387,#39388); +#39387 = CARTESIAN_POINT('',(-7.9,5.65,0.8)); +#39388 = VECTOR('',#39389,1.); +#39389 = DIRECTION('',(0.,0.,1.)); +#39390 = ORIENTED_EDGE('',*,*,#39391,.T.); +#39391 = EDGE_CURVE('',#39384,#39392,#39394,.T.); +#39392 = VERTEX_POINT('',#39393); +#39393 = CARTESIAN_POINT('',(-7.65,5.9,2.85)); +#39394 = CIRCLE('',#39395,0.25); +#39395 = AXIS2_PLACEMENT_3D('',#39396,#39397,#39398); +#39396 = CARTESIAN_POINT('',(-7.65,5.65,2.85)); +#39397 = DIRECTION('',(0.,0.,-1.)); +#39398 = DIRECTION('',(0.,1.,0.)); +#39399 = ORIENTED_EDGE('',*,*,#39400,.F.); +#39400 = EDGE_CURVE('',#33542,#39392,#39401,.T.); +#39401 = LINE('',#39402,#39403); +#39402 = CARTESIAN_POINT('',(-7.65,5.9,0.8)); +#39403 = VECTOR('',#39404,1.); +#39404 = DIRECTION('',(0.,0.,1.)); +#39405 = CYLINDRICAL_SURFACE('',#39406,0.25); +#39406 = AXIS2_PLACEMENT_3D('',#39407,#39408,#39409); +#39407 = CARTESIAN_POINT('',(-7.65,5.65,0.8)); +#39408 = DIRECTION('',(0.,0.,1.)); +#39409 = DIRECTION('',(0.,1.,0.)); +#39410 = ADVANCED_FACE('',(#39411),#39429,.T.); +#39411 = FACE_BOUND('',#39412,.T.); +#39412 = EDGE_LOOP('',(#39413,#39414,#39422,#39428)); +#39413 = ORIENTED_EDGE('',*,*,#33603,.F.); +#39414 = ORIENTED_EDGE('',*,*,#39415,.T.); +#39415 = EDGE_CURVE('',#33595,#39416,#39418,.T.); +#39416 = VERTEX_POINT('',#39417); +#39417 = CARTESIAN_POINT('',(-7.9,-11.45,2.85)); +#39418 = LINE('',#39419,#39420); +#39419 = CARTESIAN_POINT('',(-7.9,-11.45,0.8)); +#39420 = VECTOR('',#39421,1.); +#39421 = DIRECTION('',(0.,0.,1.)); +#39422 = ORIENTED_EDGE('',*,*,#39423,.T.); +#39423 = EDGE_CURVE('',#39416,#39384,#39424,.T.); +#39424 = LINE('',#39425,#39426); +#39425 = CARTESIAN_POINT('',(-7.9,-11.7,2.85)); +#39426 = VECTOR('',#39427,1.); +#39427 = DIRECTION('',(0.,1.,0.)); +#39428 = ORIENTED_EDGE('',*,*,#39383,.F.); +#39429 = PLANE('',#39430); +#39430 = AXIS2_PLACEMENT_3D('',#39431,#39432,#39433); +#39431 = CARTESIAN_POINT('',(-7.9,-11.7,0.8)); +#39432 = DIRECTION('',(-1.,0.,0.)); +#39433 = DIRECTION('',(0.,1.,0.)); +#39434 = ADVANCED_FACE('',(#39435),#39454,.T.); +#39435 = FACE_BOUND('',#39436,.T.); +#39436 = EDGE_LOOP('',(#39437,#39445,#39452,#39453)); +#39437 = ORIENTED_EDGE('',*,*,#39438,.T.); +#39438 = EDGE_CURVE('',#33587,#39439,#39441,.T.); +#39439 = VERTEX_POINT('',#39440); +#39440 = CARTESIAN_POINT('',(-7.65,-11.7,2.85)); +#39441 = LINE('',#39442,#39443); +#39442 = CARTESIAN_POINT('',(-7.65,-11.7,0.8)); +#39443 = VECTOR('',#39444,1.); +#39444 = DIRECTION('',(0.,0.,1.)); +#39445 = ORIENTED_EDGE('',*,*,#39446,.T.); +#39446 = EDGE_CURVE('',#39439,#39416,#39447,.T.); +#39447 = CIRCLE('',#39448,0.25); +#39448 = AXIS2_PLACEMENT_3D('',#39449,#39450,#39451); +#39449 = CARTESIAN_POINT('',(-7.65,-11.45,2.85)); +#39450 = DIRECTION('',(-0.,-0.,-1.)); +#39451 = DIRECTION('',(0.,-1.,0.)); +#39452 = ORIENTED_EDGE('',*,*,#39415,.F.); +#39453 = ORIENTED_EDGE('',*,*,#33594,.F.); +#39454 = CYLINDRICAL_SURFACE('',#39455,0.25); +#39455 = AXIS2_PLACEMENT_3D('',#39456,#39457,#39458); +#39456 = CARTESIAN_POINT('',(-7.65,-11.45,0.8)); +#39457 = DIRECTION('',(0.,0.,1.)); +#39458 = DIRECTION('',(0.,-1.,0.)); +#39459 = ADVANCED_FACE('',(#39460),#39478,.T.); +#39460 = FACE_BOUND('',#39461,.T.); +#39461 = EDGE_LOOP('',(#39462,#39463,#39471,#39477)); +#39462 = ORIENTED_EDGE('',*,*,#33586,.F.); +#39463 = ORIENTED_EDGE('',*,*,#39464,.T.); +#39464 = EDGE_CURVE('',#33578,#39465,#39467,.T.); +#39465 = VERTEX_POINT('',#39466); +#39466 = CARTESIAN_POINT('',(7.65,-11.7,2.85)); +#39467 = LINE('',#39468,#39469); +#39468 = CARTESIAN_POINT('',(7.65,-11.7,0.8)); +#39469 = VECTOR('',#39470,1.); +#39470 = DIRECTION('',(0.,0.,1.)); +#39471 = ORIENTED_EDGE('',*,*,#39472,.T.); +#39472 = EDGE_CURVE('',#39465,#39439,#39473,.T.); +#39473 = LINE('',#39474,#39475); +#39474 = CARTESIAN_POINT('',(7.9,-11.7,2.85)); +#39475 = VECTOR('',#39476,1.); +#39476 = DIRECTION('',(-1.,0.,0.)); +#39477 = ORIENTED_EDGE('',*,*,#39438,.F.); +#39478 = PLANE('',#39479); +#39479 = AXIS2_PLACEMENT_3D('',#39480,#39481,#39482); +#39480 = CARTESIAN_POINT('',(7.9,-11.7,0.8)); +#39481 = DIRECTION('',(0.,-1.,0.)); +#39482 = DIRECTION('',(-1.,0.,0.)); +#39483 = ADVANCED_FACE('',(#39484),#39503,.T.); +#39484 = FACE_BOUND('',#39485,.T.); +#39485 = EDGE_LOOP('',(#39486,#39494,#39501,#39502)); +#39486 = ORIENTED_EDGE('',*,*,#39487,.T.); +#39487 = EDGE_CURVE('',#33570,#39488,#39490,.T.); +#39488 = VERTEX_POINT('',#39489); +#39489 = CARTESIAN_POINT('',(7.9,-11.45,2.85)); +#39490 = LINE('',#39491,#39492); +#39491 = CARTESIAN_POINT('',(7.9,-11.45,0.8)); +#39492 = VECTOR('',#39493,1.); +#39493 = DIRECTION('',(0.,0.,1.)); +#39494 = ORIENTED_EDGE('',*,*,#39495,.F.); +#39495 = EDGE_CURVE('',#39465,#39488,#39496,.T.); +#39496 = CIRCLE('',#39497,0.25); +#39497 = AXIS2_PLACEMENT_3D('',#39498,#39499,#39500); +#39498 = CARTESIAN_POINT('',(7.65,-11.45,2.85)); +#39499 = DIRECTION('',(-0.,0.,1.)); +#39500 = DIRECTION('',(0.,-1.,0.)); +#39501 = ORIENTED_EDGE('',*,*,#39464,.F.); +#39502 = ORIENTED_EDGE('',*,*,#33577,.F.); +#39503 = CYLINDRICAL_SURFACE('',#39504,0.25); +#39504 = AXIS2_PLACEMENT_3D('',#39505,#39506,#39507); +#39505 = CARTESIAN_POINT('',(7.65,-11.45,0.8)); +#39506 = DIRECTION('',(0.,0.,1.)); +#39507 = DIRECTION('',(1.,0.,-0.)); +#39508 = ADVANCED_FACE('',(#39509),#39527,.T.); +#39509 = FACE_BOUND('',#39510,.T.); +#39510 = EDGE_LOOP('',(#39511,#39512,#39520,#39526)); +#39511 = ORIENTED_EDGE('',*,*,#33569,.F.); +#39512 = ORIENTED_EDGE('',*,*,#39513,.T.); +#39513 = EDGE_CURVE('',#33561,#39514,#39516,.T.); +#39514 = VERTEX_POINT('',#39515); +#39515 = CARTESIAN_POINT('',(7.9,5.65,2.85)); +#39516 = LINE('',#39517,#39518); +#39517 = CARTESIAN_POINT('',(7.9,5.65,0.8)); +#39518 = VECTOR('',#39519,1.); +#39519 = DIRECTION('',(0.,0.,1.)); +#39520 = ORIENTED_EDGE('',*,*,#39521,.T.); +#39521 = EDGE_CURVE('',#39514,#39488,#39522,.T.); +#39522 = LINE('',#39523,#39524); +#39523 = CARTESIAN_POINT('',(7.9,5.9,2.85)); +#39524 = VECTOR('',#39525,1.); +#39525 = DIRECTION('',(0.,-1.,0.)); +#39526 = ORIENTED_EDGE('',*,*,#39487,.F.); +#39527 = PLANE('',#39528); +#39528 = AXIS2_PLACEMENT_3D('',#39529,#39530,#39531); +#39529 = CARTESIAN_POINT('',(7.9,5.9,0.8)); +#39530 = DIRECTION('',(1.,0.,0.)); +#39531 = DIRECTION('',(0.,-1.,0.)); +#39532 = ADVANCED_FACE('',(#39533),#39552,.T.); +#39533 = FACE_BOUND('',#39534,.T.); +#39534 = EDGE_LOOP('',(#39535,#39543,#39550,#39551)); +#39535 = ORIENTED_EDGE('',*,*,#39536,.T.); +#39536 = EDGE_CURVE('',#33553,#39537,#39539,.T.); +#39537 = VERTEX_POINT('',#39538); +#39538 = CARTESIAN_POINT('',(7.65,5.9,2.85)); +#39539 = LINE('',#39540,#39541); +#39540 = CARTESIAN_POINT('',(7.65,5.9,0.8)); +#39541 = VECTOR('',#39542,1.); +#39542 = DIRECTION('',(0.,0.,1.)); +#39543 = ORIENTED_EDGE('',*,*,#39544,.T.); +#39544 = EDGE_CURVE('',#39537,#39514,#39545,.T.); +#39545 = CIRCLE('',#39546,0.25); +#39546 = AXIS2_PLACEMENT_3D('',#39547,#39548,#39549); +#39547 = CARTESIAN_POINT('',(7.65,5.65,2.85)); +#39548 = DIRECTION('',(0.,0.,-1.)); +#39549 = DIRECTION('',(1.,0.,0.)); +#39550 = ORIENTED_EDGE('',*,*,#39513,.F.); +#39551 = ORIENTED_EDGE('',*,*,#33560,.F.); +#39552 = CYLINDRICAL_SURFACE('',#39553,0.25); +#39553 = AXIS2_PLACEMENT_3D('',#39554,#39555,#39556); +#39554 = CARTESIAN_POINT('',(7.65,5.65,0.8)); +#39555 = DIRECTION('',(0.,0.,1.)); +#39556 = DIRECTION('',(0.,1.,0.)); +#39557 = ADVANCED_FACE('',(#39558),#39569,.T.); +#39558 = FACE_BOUND('',#39559,.T.); +#39559 = EDGE_LOOP('',(#39560,#39561,#39562,#39568)); +#39560 = ORIENTED_EDGE('',*,*,#33552,.F.); +#39561 = ORIENTED_EDGE('',*,*,#39400,.T.); +#39562 = ORIENTED_EDGE('',*,*,#39563,.T.); +#39563 = EDGE_CURVE('',#39392,#39537,#39564,.T.); +#39564 = LINE('',#39565,#39566); +#39565 = CARTESIAN_POINT('',(-7.9,5.9,2.85)); +#39566 = VECTOR('',#39567,1.); +#39567 = DIRECTION('',(1.,0.,0.)); +#39568 = ORIENTED_EDGE('',*,*,#39536,.F.); +#39569 = PLANE('',#39570); +#39570 = AXIS2_PLACEMENT_3D('',#39571,#39572,#39573); +#39571 = CARTESIAN_POINT('',(-7.9,5.9,0.8)); +#39572 = DIRECTION('',(0.,1.,0.)); +#39573 = DIRECTION('',(1.,0.,0.)); +#39574 = ADVANCED_FACE('',(#39575),#39600,.F.); +#39575 = FACE_BOUND('',#39576,.F.); +#39576 = EDGE_LOOP('',(#39577,#39585,#39593,#39599)); +#39577 = ORIENTED_EDGE('',*,*,#39578,.T.); +#39578 = EDGE_CURVE('',#33612,#39579,#39581,.T.); +#39579 = VERTEX_POINT('',#39580); +#39580 = CARTESIAN_POINT('',(7.5,6.75,1.)); +#39581 = LINE('',#39582,#39583); +#39582 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#39583 = VECTOR('',#39584,1.); +#39584 = DIRECTION('',(0.,0.,1.)); +#39585 = ORIENTED_EDGE('',*,*,#39586,.T.); +#39586 = EDGE_CURVE('',#39579,#39587,#39589,.T.); +#39587 = VERTEX_POINT('',#39588); +#39588 = CARTESIAN_POINT('',(7.5,12.25,1.)); +#39589 = LINE('',#39590,#39591); +#39590 = CARTESIAN_POINT('',(7.5,6.75,1.)); +#39591 = VECTOR('',#39592,1.); +#39592 = DIRECTION('',(0.,1.,0.)); +#39593 = ORIENTED_EDGE('',*,*,#39594,.F.); +#39594 = EDGE_CURVE('',#33614,#39587,#39595,.T.); +#39595 = LINE('',#39596,#39597); +#39596 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#39597 = VECTOR('',#39598,1.); +#39598 = DIRECTION('',(0.,0.,1.)); +#39599 = ORIENTED_EDGE('',*,*,#33611,.F.); +#39600 = PLANE('',#39601); +#39601 = AXIS2_PLACEMENT_3D('',#39602,#39603,#39604); +#39602 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#39603 = DIRECTION('',(-1.,0.,0.)); +#39604 = DIRECTION('',(0.,1.,0.)); +#39605 = ADVANCED_FACE('',(#39606),#39624,.F.); +#39606 = FACE_BOUND('',#39607,.F.); +#39607 = EDGE_LOOP('',(#39608,#39609,#39617,#39623)); +#39608 = ORIENTED_EDGE('',*,*,#39594,.T.); +#39609 = ORIENTED_EDGE('',*,*,#39610,.T.); +#39610 = EDGE_CURVE('',#39587,#39611,#39613,.T.); +#39611 = VERTEX_POINT('',#39612); +#39612 = CARTESIAN_POINT('',(2.,12.25,1.)); +#39613 = LINE('',#39614,#39615); +#39614 = CARTESIAN_POINT('',(7.5,12.25,1.)); +#39615 = VECTOR('',#39616,1.); +#39616 = DIRECTION('',(-1.,0.,0.)); +#39617 = ORIENTED_EDGE('',*,*,#39618,.F.); +#39618 = EDGE_CURVE('',#33822,#39611,#39619,.T.); +#39619 = LINE('',#39620,#39621); +#39620 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#39621 = VECTOR('',#39622,1.); +#39622 = DIRECTION('',(0.,0.,1.)); +#39623 = ORIENTED_EDGE('',*,*,#33829,.F.); +#39624 = PLANE('',#39625); +#39625 = AXIS2_PLACEMENT_3D('',#39626,#39627,#39628); +#39626 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#39627 = DIRECTION('',(0.,-1.,0.)); +#39628 = DIRECTION('',(-1.,0.,0.)); +#39629 = ADVANCED_FACE('',(#39630),#39648,.F.); +#39630 = FACE_BOUND('',#39631,.F.); +#39631 = EDGE_LOOP('',(#39632,#39633,#39641,#39647)); +#39632 = ORIENTED_EDGE('',*,*,#39618,.T.); +#39633 = ORIENTED_EDGE('',*,*,#39634,.T.); +#39634 = EDGE_CURVE('',#39611,#39635,#39637,.T.); +#39635 = VERTEX_POINT('',#39636); +#39636 = CARTESIAN_POINT('',(2.,9.75,1.)); +#39637 = LINE('',#39638,#39639); +#39638 = CARTESIAN_POINT('',(2.,12.25,1.)); +#39639 = VECTOR('',#39640,1.); +#39640 = DIRECTION('',(0.,-1.,0.)); +#39641 = ORIENTED_EDGE('',*,*,#39642,.F.); +#39642 = EDGE_CURVE('',#33814,#39635,#39643,.T.); +#39643 = LINE('',#39644,#39645); +#39644 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#39645 = VECTOR('',#39646,1.); +#39646 = DIRECTION('',(0.,0.,1.)); +#39647 = ORIENTED_EDGE('',*,*,#33821,.F.); +#39648 = PLANE('',#39649); +#39649 = AXIS2_PLACEMENT_3D('',#39650,#39651,#39652); +#39650 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#39651 = DIRECTION('',(1.,0.,0.)); +#39652 = DIRECTION('',(0.,-1.,0.)); +#39653 = ADVANCED_FACE('',(#39654),#39672,.F.); +#39654 = FACE_BOUND('',#39655,.F.); +#39655 = EDGE_LOOP('',(#39656,#39657,#39665,#39671)); +#39656 = ORIENTED_EDGE('',*,*,#39642,.T.); +#39657 = ORIENTED_EDGE('',*,*,#39658,.T.); +#39658 = EDGE_CURVE('',#39635,#39659,#39661,.T.); +#39659 = VERTEX_POINT('',#39660); +#39660 = CARTESIAN_POINT('',(0.5,9.75,1.)); +#39661 = LINE('',#39662,#39663); +#39662 = CARTESIAN_POINT('',(2.,9.75,1.)); +#39663 = VECTOR('',#39664,1.); +#39664 = DIRECTION('',(-1.,0.,0.)); +#39665 = ORIENTED_EDGE('',*,*,#39666,.F.); +#39666 = EDGE_CURVE('',#33806,#39659,#39667,.T.); +#39667 = LINE('',#39668,#39669); +#39668 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#39669 = VECTOR('',#39670,1.); +#39670 = DIRECTION('',(0.,0.,1.)); +#39671 = ORIENTED_EDGE('',*,*,#33813,.F.); +#39672 = PLANE('',#39673); +#39673 = AXIS2_PLACEMENT_3D('',#39674,#39675,#39676); +#39674 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#39675 = DIRECTION('',(0.,-1.,0.)); +#39676 = DIRECTION('',(-1.,0.,0.)); +#39677 = ADVANCED_FACE('',(#39678),#39696,.F.); +#39678 = FACE_BOUND('',#39679,.F.); +#39679 = EDGE_LOOP('',(#39680,#39681,#39689,#39695)); +#39680 = ORIENTED_EDGE('',*,*,#39666,.T.); +#39681 = ORIENTED_EDGE('',*,*,#39682,.T.); +#39682 = EDGE_CURVE('',#39659,#39683,#39685,.T.); +#39683 = VERTEX_POINT('',#39684); +#39684 = CARTESIAN_POINT('',(0.5,12.25,1.)); +#39685 = LINE('',#39686,#39687); +#39686 = CARTESIAN_POINT('',(0.5,9.75,1.)); +#39687 = VECTOR('',#39688,1.); +#39688 = DIRECTION('',(0.,1.,0.)); +#39689 = ORIENTED_EDGE('',*,*,#39690,.F.); +#39690 = EDGE_CURVE('',#33798,#39683,#39691,.T.); +#39691 = LINE('',#39692,#39693); +#39692 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#39693 = VECTOR('',#39694,1.); +#39694 = DIRECTION('',(0.,0.,1.)); +#39695 = ORIENTED_EDGE('',*,*,#33805,.F.); +#39696 = PLANE('',#39697); +#39697 = AXIS2_PLACEMENT_3D('',#39698,#39699,#39700); +#39698 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#39699 = DIRECTION('',(-1.,0.,0.)); +#39700 = DIRECTION('',(0.,1.,0.)); +#39701 = ADVANCED_FACE('',(#39702),#39720,.F.); +#39702 = FACE_BOUND('',#39703,.F.); +#39703 = EDGE_LOOP('',(#39704,#39705,#39713,#39719)); +#39704 = ORIENTED_EDGE('',*,*,#39690,.T.); +#39705 = ORIENTED_EDGE('',*,*,#39706,.T.); +#39706 = EDGE_CURVE('',#39683,#39707,#39709,.T.); +#39707 = VERTEX_POINT('',#39708); +#39708 = CARTESIAN_POINT('',(-2.75,12.25,1.)); +#39709 = LINE('',#39710,#39711); +#39710 = CARTESIAN_POINT('',(0.5,12.25,1.)); +#39711 = VECTOR('',#39712,1.); +#39712 = DIRECTION('',(-1.,0.,0.)); +#39713 = ORIENTED_EDGE('',*,*,#39714,.F.); +#39714 = EDGE_CURVE('',#33790,#39707,#39715,.T.); +#39715 = LINE('',#39716,#39717); +#39716 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#39717 = VECTOR('',#39718,1.); +#39718 = DIRECTION('',(0.,0.,1.)); +#39719 = ORIENTED_EDGE('',*,*,#33797,.F.); +#39720 = PLANE('',#39721); +#39721 = AXIS2_PLACEMENT_3D('',#39722,#39723,#39724); +#39722 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#39723 = DIRECTION('',(0.,-1.,0.)); +#39724 = DIRECTION('',(-1.,0.,0.)); +#39725 = ADVANCED_FACE('',(#39726),#39744,.F.); +#39726 = FACE_BOUND('',#39727,.F.); +#39727 = EDGE_LOOP('',(#39728,#39729,#39737,#39743)); +#39728 = ORIENTED_EDGE('',*,*,#39714,.T.); +#39729 = ORIENTED_EDGE('',*,*,#39730,.T.); +#39730 = EDGE_CURVE('',#39707,#39731,#39733,.T.); +#39731 = VERTEX_POINT('',#39732); +#39732 = CARTESIAN_POINT('',(-2.75,9.75,1.)); +#39733 = LINE('',#39734,#39735); +#39734 = CARTESIAN_POINT('',(-2.75,12.25,1.)); +#39735 = VECTOR('',#39736,1.); +#39736 = DIRECTION('',(0.,-1.,0.)); +#39737 = ORIENTED_EDGE('',*,*,#39738,.F.); +#39738 = EDGE_CURVE('',#33782,#39731,#39739,.T.); +#39739 = LINE('',#39740,#39741); +#39740 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#39741 = VECTOR('',#39742,1.); +#39742 = DIRECTION('',(0.,0.,1.)); +#39743 = ORIENTED_EDGE('',*,*,#33789,.F.); +#39744 = PLANE('',#39745); +#39745 = AXIS2_PLACEMENT_3D('',#39746,#39747,#39748); +#39746 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#39747 = DIRECTION('',(1.,0.,0.)); +#39748 = DIRECTION('',(0.,-1.,0.)); +#39749 = ADVANCED_FACE('',(#39750),#39768,.F.); +#39750 = FACE_BOUND('',#39751,.F.); +#39751 = EDGE_LOOP('',(#39752,#39753,#39761,#39767)); +#39752 = ORIENTED_EDGE('',*,*,#39738,.T.); +#39753 = ORIENTED_EDGE('',*,*,#39754,.T.); +#39754 = EDGE_CURVE('',#39731,#39755,#39757,.T.); +#39755 = VERTEX_POINT('',#39756); +#39756 = CARTESIAN_POINT('',(-4.25,9.75,1.)); +#39757 = LINE('',#39758,#39759); +#39758 = CARTESIAN_POINT('',(-2.75,9.75,1.)); +#39759 = VECTOR('',#39760,1.); +#39760 = DIRECTION('',(-1.,0.,0.)); +#39761 = ORIENTED_EDGE('',*,*,#39762,.F.); +#39762 = EDGE_CURVE('',#33774,#39755,#39763,.T.); +#39763 = LINE('',#39764,#39765); +#39764 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#39765 = VECTOR('',#39766,1.); +#39766 = DIRECTION('',(0.,0.,1.)); +#39767 = ORIENTED_EDGE('',*,*,#33781,.F.); +#39768 = PLANE('',#39769); +#39769 = AXIS2_PLACEMENT_3D('',#39770,#39771,#39772); +#39770 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#39771 = DIRECTION('',(0.,-1.,0.)); +#39772 = DIRECTION('',(-1.,0.,0.)); +#39773 = ADVANCED_FACE('',(#39774),#39792,.F.); +#39774 = FACE_BOUND('',#39775,.F.); +#39775 = EDGE_LOOP('',(#39776,#39777,#39785,#39791)); +#39776 = ORIENTED_EDGE('',*,*,#39762,.T.); +#39777 = ORIENTED_EDGE('',*,*,#39778,.T.); +#39778 = EDGE_CURVE('',#39755,#39779,#39781,.T.); +#39779 = VERTEX_POINT('',#39780); +#39780 = CARTESIAN_POINT('',(-4.25,12.25,1.)); +#39781 = LINE('',#39782,#39783); +#39782 = CARTESIAN_POINT('',(-4.25,9.75,1.)); +#39783 = VECTOR('',#39784,1.); +#39784 = DIRECTION('',(0.,1.,0.)); +#39785 = ORIENTED_EDGE('',*,*,#39786,.F.); +#39786 = EDGE_CURVE('',#33766,#39779,#39787,.T.); +#39787 = LINE('',#39788,#39789); +#39788 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#39789 = VECTOR('',#39790,1.); +#39790 = DIRECTION('',(0.,0.,1.)); +#39791 = ORIENTED_EDGE('',*,*,#33773,.F.); +#39792 = PLANE('',#39793); +#39793 = AXIS2_PLACEMENT_3D('',#39794,#39795,#39796); +#39794 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#39795 = DIRECTION('',(-1.,0.,0.)); +#39796 = DIRECTION('',(0.,1.,0.)); +#39797 = ADVANCED_FACE('',(#39798),#39816,.F.); +#39798 = FACE_BOUND('',#39799,.F.); +#39799 = EDGE_LOOP('',(#39800,#39801,#39809,#39815)); +#39800 = ORIENTED_EDGE('',*,*,#39786,.T.); +#39801 = ORIENTED_EDGE('',*,*,#39802,.T.); +#39802 = EDGE_CURVE('',#39779,#39803,#39805,.T.); +#39803 = VERTEX_POINT('',#39804); +#39804 = CARTESIAN_POINT('',(-7.5,12.25,1.)); +#39805 = LINE('',#39806,#39807); +#39806 = CARTESIAN_POINT('',(-4.25,12.25,1.)); +#39807 = VECTOR('',#39808,1.); +#39808 = DIRECTION('',(-1.,0.,0.)); +#39809 = ORIENTED_EDGE('',*,*,#39810,.F.); +#39810 = EDGE_CURVE('',#33758,#39803,#39811,.T.); +#39811 = LINE('',#39812,#39813); +#39812 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#39813 = VECTOR('',#39814,1.); +#39814 = DIRECTION('',(0.,0.,1.)); +#39815 = ORIENTED_EDGE('',*,*,#33765,.F.); +#39816 = PLANE('',#39817); +#39817 = AXIS2_PLACEMENT_3D('',#39818,#39819,#39820); +#39818 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#39819 = DIRECTION('',(0.,-1.,0.)); +#39820 = DIRECTION('',(-1.,0.,0.)); +#39821 = ADVANCED_FACE('',(#39822),#39840,.F.); +#39822 = FACE_BOUND('',#39823,.F.); +#39823 = EDGE_LOOP('',(#39824,#39825,#39833,#39839)); +#39824 = ORIENTED_EDGE('',*,*,#39810,.T.); +#39825 = ORIENTED_EDGE('',*,*,#39826,.T.); +#39826 = EDGE_CURVE('',#39803,#39827,#39829,.T.); +#39827 = VERTEX_POINT('',#39828); +#39828 = CARTESIAN_POINT('',(-7.5,7.75,1.)); +#39829 = LINE('',#39830,#39831); +#39830 = CARTESIAN_POINT('',(-7.5,12.25,1.)); +#39831 = VECTOR('',#39832,1.); +#39832 = DIRECTION('',(0.,-1.,0.)); +#39833 = ORIENTED_EDGE('',*,*,#39834,.F.); +#39834 = EDGE_CURVE('',#33750,#39827,#39835,.T.); +#39835 = LINE('',#39836,#39837); +#39836 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#39837 = VECTOR('',#39838,1.); +#39838 = DIRECTION('',(0.,0.,1.)); +#39839 = ORIENTED_EDGE('',*,*,#33757,.F.); +#39840 = PLANE('',#39841); +#39841 = AXIS2_PLACEMENT_3D('',#39842,#39843,#39844); +#39842 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#39843 = DIRECTION('',(1.,0.,0.)); +#39844 = DIRECTION('',(0.,-1.,0.)); +#39845 = ADVANCED_FACE('',(#39846),#39864,.F.); +#39846 = FACE_BOUND('',#39847,.F.); +#39847 = EDGE_LOOP('',(#39848,#39849,#39857,#39863)); +#39848 = ORIENTED_EDGE('',*,*,#39834,.T.); +#39849 = ORIENTED_EDGE('',*,*,#39850,.T.); +#39850 = EDGE_CURVE('',#39827,#39851,#39853,.T.); +#39851 = VERTEX_POINT('',#39852); +#39852 = CARTESIAN_POINT('',(-6.5,7.75,1.)); +#39853 = LINE('',#39854,#39855); +#39854 = CARTESIAN_POINT('',(-7.5,7.75,1.)); +#39855 = VECTOR('',#39856,1.); +#39856 = DIRECTION('',(1.,0.,0.)); +#39857 = ORIENTED_EDGE('',*,*,#39858,.F.); +#39858 = EDGE_CURVE('',#33742,#39851,#39859,.T.); +#39859 = LINE('',#39860,#39861); +#39860 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#39861 = VECTOR('',#39862,1.); +#39862 = DIRECTION('',(0.,0.,1.)); +#39863 = ORIENTED_EDGE('',*,*,#33749,.F.); +#39864 = PLANE('',#39865); +#39865 = AXIS2_PLACEMENT_3D('',#39866,#39867,#39868); +#39866 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#39867 = DIRECTION('',(0.,1.,0.)); +#39868 = DIRECTION('',(1.,0.,0.)); +#39869 = ADVANCED_FACE('',(#39870),#39888,.F.); +#39870 = FACE_BOUND('',#39871,.F.); +#39871 = EDGE_LOOP('',(#39872,#39873,#39881,#39887)); +#39872 = ORIENTED_EDGE('',*,*,#39858,.T.); +#39873 = ORIENTED_EDGE('',*,*,#39874,.T.); +#39874 = EDGE_CURVE('',#39851,#39875,#39877,.T.); +#39875 = VERTEX_POINT('',#39876); +#39876 = CARTESIAN_POINT('',(-6.5,11.25,1.)); +#39877 = LINE('',#39878,#39879); +#39878 = CARTESIAN_POINT('',(-6.5,7.75,1.)); +#39879 = VECTOR('',#39880,1.); +#39880 = DIRECTION('',(0.,1.,0.)); +#39881 = ORIENTED_EDGE('',*,*,#39882,.F.); +#39882 = EDGE_CURVE('',#33734,#39875,#39883,.T.); +#39883 = LINE('',#39884,#39885); +#39884 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#39885 = VECTOR('',#39886,1.); +#39886 = DIRECTION('',(0.,0.,1.)); +#39887 = ORIENTED_EDGE('',*,*,#33741,.F.); +#39888 = PLANE('',#39889); +#39889 = AXIS2_PLACEMENT_3D('',#39890,#39891,#39892); +#39890 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#39891 = DIRECTION('',(-1.,0.,0.)); +#39892 = DIRECTION('',(0.,1.,0.)); +#39893 = ADVANCED_FACE('',(#39894),#39912,.F.); +#39894 = FACE_BOUND('',#39895,.F.); +#39895 = EDGE_LOOP('',(#39896,#39897,#39905,#39911)); +#39896 = ORIENTED_EDGE('',*,*,#39882,.T.); +#39897 = ORIENTED_EDGE('',*,*,#39898,.T.); +#39898 = EDGE_CURVE('',#39875,#39899,#39901,.T.); +#39899 = VERTEX_POINT('',#39900); +#39900 = CARTESIAN_POINT('',(-5.25,11.25,1.)); +#39901 = LINE('',#39902,#39903); +#39902 = CARTESIAN_POINT('',(-6.5,11.25,1.)); +#39903 = VECTOR('',#39904,1.); +#39904 = DIRECTION('',(1.,0.,0.)); +#39905 = ORIENTED_EDGE('',*,*,#39906,.F.); +#39906 = EDGE_CURVE('',#33726,#39899,#39907,.T.); +#39907 = LINE('',#39908,#39909); +#39908 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#39909 = VECTOR('',#39910,1.); +#39910 = DIRECTION('',(0.,0.,1.)); +#39911 = ORIENTED_EDGE('',*,*,#33733,.F.); +#39912 = PLANE('',#39913); +#39913 = AXIS2_PLACEMENT_3D('',#39914,#39915,#39916); +#39914 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#39915 = DIRECTION('',(0.,1.,0.)); +#39916 = DIRECTION('',(1.,0.,0.)); +#39917 = ADVANCED_FACE('',(#39918),#39936,.F.); +#39918 = FACE_BOUND('',#39919,.F.); +#39919 = EDGE_LOOP('',(#39920,#39921,#39929,#39935)); +#39920 = ORIENTED_EDGE('',*,*,#39906,.T.); +#39921 = ORIENTED_EDGE('',*,*,#39922,.T.); +#39922 = EDGE_CURVE('',#39899,#39923,#39925,.T.); +#39923 = VERTEX_POINT('',#39924); +#39924 = CARTESIAN_POINT('',(-5.25,8.75,1.)); +#39925 = LINE('',#39926,#39927); +#39926 = CARTESIAN_POINT('',(-5.25,11.25,1.)); +#39927 = VECTOR('',#39928,1.); +#39928 = DIRECTION('',(0.,-1.,0.)); +#39929 = ORIENTED_EDGE('',*,*,#39930,.F.); +#39930 = EDGE_CURVE('',#33718,#39923,#39931,.T.); +#39931 = LINE('',#39932,#39933); +#39932 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#39933 = VECTOR('',#39934,1.); +#39934 = DIRECTION('',(0.,0.,1.)); +#39935 = ORIENTED_EDGE('',*,*,#33725,.F.); +#39936 = PLANE('',#39937); +#39937 = AXIS2_PLACEMENT_3D('',#39938,#39939,#39940); +#39938 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#39939 = DIRECTION('',(1.,0.,0.)); +#39940 = DIRECTION('',(0.,-1.,0.)); +#39941 = ADVANCED_FACE('',(#39942),#39960,.F.); +#39942 = FACE_BOUND('',#39943,.F.); +#39943 = EDGE_LOOP('',(#39944,#39945,#39953,#39959)); +#39944 = ORIENTED_EDGE('',*,*,#39930,.T.); +#39945 = ORIENTED_EDGE('',*,*,#39946,.T.); +#39946 = EDGE_CURVE('',#39923,#39947,#39949,.T.); +#39947 = VERTEX_POINT('',#39948); +#39948 = CARTESIAN_POINT('',(-1.75,8.75,1.)); +#39949 = LINE('',#39950,#39951); +#39950 = CARTESIAN_POINT('',(-5.25,8.75,1.)); +#39951 = VECTOR('',#39952,1.); +#39952 = DIRECTION('',(1.,0.,0.)); +#39953 = ORIENTED_EDGE('',*,*,#39954,.F.); +#39954 = EDGE_CURVE('',#33710,#39947,#39955,.T.); +#39955 = LINE('',#39956,#39957); +#39956 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#39957 = VECTOR('',#39958,1.); +#39958 = DIRECTION('',(0.,0.,1.)); +#39959 = ORIENTED_EDGE('',*,*,#33717,.F.); +#39960 = PLANE('',#39961); +#39961 = AXIS2_PLACEMENT_3D('',#39962,#39963,#39964); +#39962 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#39963 = DIRECTION('',(0.,1.,0.)); +#39964 = DIRECTION('',(1.,0.,0.)); +#39965 = ADVANCED_FACE('',(#39966),#39984,.F.); +#39966 = FACE_BOUND('',#39967,.F.); +#39967 = EDGE_LOOP('',(#39968,#39969,#39977,#39983)); +#39968 = ORIENTED_EDGE('',*,*,#39954,.T.); +#39969 = ORIENTED_EDGE('',*,*,#39970,.T.); +#39970 = EDGE_CURVE('',#39947,#39971,#39973,.T.); +#39971 = VERTEX_POINT('',#39972); +#39972 = CARTESIAN_POINT('',(-1.75,11.25,1.)); +#39973 = LINE('',#39974,#39975); +#39974 = CARTESIAN_POINT('',(-1.75,8.75,1.)); +#39975 = VECTOR('',#39976,1.); +#39976 = DIRECTION('',(0.,1.,0.)); +#39977 = ORIENTED_EDGE('',*,*,#39978,.F.); +#39978 = EDGE_CURVE('',#33702,#39971,#39979,.T.); +#39979 = LINE('',#39980,#39981); +#39980 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#39981 = VECTOR('',#39982,1.); +#39982 = DIRECTION('',(0.,0.,1.)); +#39983 = ORIENTED_EDGE('',*,*,#33709,.F.); +#39984 = PLANE('',#39985); +#39985 = AXIS2_PLACEMENT_3D('',#39986,#39987,#39988); +#39986 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#39987 = DIRECTION('',(-1.,0.,0.)); +#39988 = DIRECTION('',(0.,1.,0.)); +#39989 = ADVANCED_FACE('',(#39990),#40008,.F.); +#39990 = FACE_BOUND('',#39991,.F.); +#39991 = EDGE_LOOP('',(#39992,#39993,#40001,#40007)); +#39992 = ORIENTED_EDGE('',*,*,#39978,.T.); +#39993 = ORIENTED_EDGE('',*,*,#39994,.T.); +#39994 = EDGE_CURVE('',#39971,#39995,#39997,.T.); +#39995 = VERTEX_POINT('',#39996); +#39996 = CARTESIAN_POINT('',(-0.5,11.25,1.)); +#39997 = LINE('',#39998,#39999); +#39998 = CARTESIAN_POINT('',(-1.75,11.25,1.)); +#39999 = VECTOR('',#40000,1.); +#40000 = DIRECTION('',(1.,0.,0.)); +#40001 = ORIENTED_EDGE('',*,*,#40002,.F.); +#40002 = EDGE_CURVE('',#33694,#39995,#40003,.T.); +#40003 = LINE('',#40004,#40005); +#40004 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#40005 = VECTOR('',#40006,1.); +#40006 = DIRECTION('',(0.,0.,1.)); +#40007 = ORIENTED_EDGE('',*,*,#33701,.F.); +#40008 = PLANE('',#40009); +#40009 = AXIS2_PLACEMENT_3D('',#40010,#40011,#40012); +#40010 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#40011 = DIRECTION('',(0.,1.,0.)); +#40012 = DIRECTION('',(1.,0.,0.)); +#40013 = ADVANCED_FACE('',(#40014),#40032,.F.); +#40014 = FACE_BOUND('',#40015,.F.); +#40015 = EDGE_LOOP('',(#40016,#40017,#40025,#40031)); +#40016 = ORIENTED_EDGE('',*,*,#40002,.T.); +#40017 = ORIENTED_EDGE('',*,*,#40018,.T.); +#40018 = EDGE_CURVE('',#39995,#40019,#40021,.T.); +#40019 = VERTEX_POINT('',#40020); +#40020 = CARTESIAN_POINT('',(-0.5,8.75,1.)); +#40021 = LINE('',#40022,#40023); +#40022 = CARTESIAN_POINT('',(-0.5,11.25,1.)); +#40023 = VECTOR('',#40024,1.); +#40024 = DIRECTION('',(0.,-1.,0.)); +#40025 = ORIENTED_EDGE('',*,*,#40026,.F.); +#40026 = EDGE_CURVE('',#33686,#40019,#40027,.T.); +#40027 = LINE('',#40028,#40029); +#40028 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#40029 = VECTOR('',#40030,1.); +#40030 = DIRECTION('',(0.,0.,1.)); +#40031 = ORIENTED_EDGE('',*,*,#33693,.F.); +#40032 = PLANE('',#40033); +#40033 = AXIS2_PLACEMENT_3D('',#40034,#40035,#40036); +#40034 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#40035 = DIRECTION('',(1.,0.,0.)); +#40036 = DIRECTION('',(0.,-1.,0.)); +#40037 = ADVANCED_FACE('',(#40038),#40056,.F.); +#40038 = FACE_BOUND('',#40039,.F.); +#40039 = EDGE_LOOP('',(#40040,#40041,#40049,#40055)); +#40040 = ORIENTED_EDGE('',*,*,#40026,.T.); +#40041 = ORIENTED_EDGE('',*,*,#40042,.T.); +#40042 = EDGE_CURVE('',#40019,#40043,#40045,.T.); +#40043 = VERTEX_POINT('',#40044); +#40044 = CARTESIAN_POINT('',(3.,8.75,1.)); +#40045 = LINE('',#40046,#40047); +#40046 = CARTESIAN_POINT('',(-0.5,8.75,1.)); +#40047 = VECTOR('',#40048,1.); +#40048 = DIRECTION('',(1.,0.,0.)); +#40049 = ORIENTED_EDGE('',*,*,#40050,.F.); +#40050 = EDGE_CURVE('',#33678,#40043,#40051,.T.); +#40051 = LINE('',#40052,#40053); +#40052 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#40053 = VECTOR('',#40054,1.); +#40054 = DIRECTION('',(0.,0.,1.)); +#40055 = ORIENTED_EDGE('',*,*,#33685,.F.); +#40056 = PLANE('',#40057); +#40057 = AXIS2_PLACEMENT_3D('',#40058,#40059,#40060); +#40058 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#40059 = DIRECTION('',(0.,1.,0.)); +#40060 = DIRECTION('',(1.,0.,0.)); +#40061 = ADVANCED_FACE('',(#40062),#40080,.F.); +#40062 = FACE_BOUND('',#40063,.F.); +#40063 = EDGE_LOOP('',(#40064,#40065,#40073,#40079)); +#40064 = ORIENTED_EDGE('',*,*,#40050,.T.); +#40065 = ORIENTED_EDGE('',*,*,#40066,.T.); +#40066 = EDGE_CURVE('',#40043,#40067,#40069,.T.); +#40067 = VERTEX_POINT('',#40068); +#40068 = CARTESIAN_POINT('',(3.,11.25,1.)); +#40069 = LINE('',#40070,#40071); +#40070 = CARTESIAN_POINT('',(3.,8.75,1.)); +#40071 = VECTOR('',#40072,1.); +#40072 = DIRECTION('',(0.,1.,0.)); +#40073 = ORIENTED_EDGE('',*,*,#40074,.F.); +#40074 = EDGE_CURVE('',#33670,#40067,#40075,.T.); +#40075 = LINE('',#40076,#40077); +#40076 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#40077 = VECTOR('',#40078,1.); +#40078 = DIRECTION('',(0.,0.,1.)); +#40079 = ORIENTED_EDGE('',*,*,#33677,.F.); +#40080 = PLANE('',#40081); +#40081 = AXIS2_PLACEMENT_3D('',#40082,#40083,#40084); +#40082 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#40083 = DIRECTION('',(-1.,0.,0.)); +#40084 = DIRECTION('',(0.,1.,0.)); +#40085 = ADVANCED_FACE('',(#40086),#40104,.F.); +#40086 = FACE_BOUND('',#40087,.F.); +#40087 = EDGE_LOOP('',(#40088,#40089,#40097,#40103)); +#40088 = ORIENTED_EDGE('',*,*,#40074,.T.); +#40089 = ORIENTED_EDGE('',*,*,#40090,.T.); +#40090 = EDGE_CURVE('',#40067,#40091,#40093,.T.); +#40091 = VERTEX_POINT('',#40092); +#40092 = CARTESIAN_POINT('',(4.25,11.25,1.)); +#40093 = LINE('',#40094,#40095); +#40094 = CARTESIAN_POINT('',(3.,11.25,1.)); +#40095 = VECTOR('',#40096,1.); +#40096 = DIRECTION('',(1.,0.,0.)); +#40097 = ORIENTED_EDGE('',*,*,#40098,.F.); +#40098 = EDGE_CURVE('',#33662,#40091,#40099,.T.); +#40099 = LINE('',#40100,#40101); +#40100 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#40101 = VECTOR('',#40102,1.); +#40102 = DIRECTION('',(0.,0.,1.)); +#40103 = ORIENTED_EDGE('',*,*,#33669,.F.); +#40104 = PLANE('',#40105); +#40105 = AXIS2_PLACEMENT_3D('',#40106,#40107,#40108); +#40106 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#40107 = DIRECTION('',(0.,1.,0.)); +#40108 = DIRECTION('',(1.,0.,0.)); +#40109 = ADVANCED_FACE('',(#40110),#40128,.F.); +#40110 = FACE_BOUND('',#40111,.F.); +#40111 = EDGE_LOOP('',(#40112,#40113,#40121,#40127)); +#40112 = ORIENTED_EDGE('',*,*,#40098,.T.); +#40113 = ORIENTED_EDGE('',*,*,#40114,.T.); +#40114 = EDGE_CURVE('',#40091,#40115,#40117,.T.); +#40115 = VERTEX_POINT('',#40116); +#40116 = CARTESIAN_POINT('',(4.25,6.75,1.)); +#40117 = LINE('',#40118,#40119); +#40118 = CARTESIAN_POINT('',(4.25,11.25,1.)); +#40119 = VECTOR('',#40120,1.); +#40120 = DIRECTION('',(0.,-1.,0.)); +#40121 = ORIENTED_EDGE('',*,*,#40122,.F.); +#40122 = EDGE_CURVE('',#33654,#40115,#40123,.T.); +#40123 = LINE('',#40124,#40125); +#40124 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#40125 = VECTOR('',#40126,1.); +#40126 = DIRECTION('',(0.,0.,1.)); +#40127 = ORIENTED_EDGE('',*,*,#33661,.F.); +#40128 = PLANE('',#40129); +#40129 = AXIS2_PLACEMENT_3D('',#40130,#40131,#40132); +#40130 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#40131 = DIRECTION('',(1.,0.,0.)); +#40132 = DIRECTION('',(0.,-1.,0.)); +#40133 = ADVANCED_FACE('',(#40134),#40152,.F.); +#40134 = FACE_BOUND('',#40135,.F.); +#40135 = EDGE_LOOP('',(#40136,#40137,#40145,#40151)); +#40136 = ORIENTED_EDGE('',*,*,#40122,.T.); +#40137 = ORIENTED_EDGE('',*,*,#40138,.T.); +#40138 = EDGE_CURVE('',#40115,#40139,#40141,.T.); +#40139 = VERTEX_POINT('',#40140); +#40140 = CARTESIAN_POINT('',(5.25,6.75,1.)); +#40141 = LINE('',#40142,#40143); +#40142 = CARTESIAN_POINT('',(4.25,6.75,1.)); +#40143 = VECTOR('',#40144,1.); +#40144 = DIRECTION('',(1.,0.,0.)); +#40145 = ORIENTED_EDGE('',*,*,#40146,.F.); +#40146 = EDGE_CURVE('',#33646,#40139,#40147,.T.); +#40147 = LINE('',#40148,#40149); +#40148 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#40149 = VECTOR('',#40150,1.); +#40150 = DIRECTION('',(0.,0.,1.)); +#40151 = ORIENTED_EDGE('',*,*,#33653,.F.); +#40152 = PLANE('',#40153); +#40153 = AXIS2_PLACEMENT_3D('',#40154,#40155,#40156); +#40154 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#40155 = DIRECTION('',(0.,1.,0.)); +#40156 = DIRECTION('',(1.,0.,0.)); +#40157 = ADVANCED_FACE('',(#40158),#40176,.F.); +#40158 = FACE_BOUND('',#40159,.F.); +#40159 = EDGE_LOOP('',(#40160,#40161,#40169,#40175)); +#40160 = ORIENTED_EDGE('',*,*,#40146,.T.); +#40161 = ORIENTED_EDGE('',*,*,#40162,.T.); +#40162 = EDGE_CURVE('',#40139,#40163,#40165,.T.); +#40163 = VERTEX_POINT('',#40164); +#40164 = CARTESIAN_POINT('',(5.25,11.25,1.)); +#40165 = LINE('',#40166,#40167); +#40166 = CARTESIAN_POINT('',(5.25,6.75,1.)); +#40167 = VECTOR('',#40168,1.); +#40168 = DIRECTION('',(0.,1.,0.)); +#40169 = ORIENTED_EDGE('',*,*,#40170,.F.); +#40170 = EDGE_CURVE('',#33638,#40163,#40171,.T.); +#40171 = LINE('',#40172,#40173); +#40172 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#40173 = VECTOR('',#40174,1.); +#40174 = DIRECTION('',(0.,0.,1.)); +#40175 = ORIENTED_EDGE('',*,*,#33645,.F.); +#40176 = PLANE('',#40177); +#40177 = AXIS2_PLACEMENT_3D('',#40178,#40179,#40180); +#40178 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#40179 = DIRECTION('',(-1.,0.,0.)); +#40180 = DIRECTION('',(0.,1.,0.)); +#40181 = ADVANCED_FACE('',(#40182),#40200,.F.); +#40182 = FACE_BOUND('',#40183,.F.); +#40183 = EDGE_LOOP('',(#40184,#40185,#40193,#40199)); +#40184 = ORIENTED_EDGE('',*,*,#40170,.T.); +#40185 = ORIENTED_EDGE('',*,*,#40186,.T.); +#40186 = EDGE_CURVE('',#40163,#40187,#40189,.T.); +#40187 = VERTEX_POINT('',#40188); +#40188 = CARTESIAN_POINT('',(6.5,11.25,1.)); +#40189 = LINE('',#40190,#40191); +#40190 = CARTESIAN_POINT('',(5.25,11.25,1.)); +#40191 = VECTOR('',#40192,1.); +#40192 = DIRECTION('',(1.,0.,0.)); +#40193 = ORIENTED_EDGE('',*,*,#40194,.F.); +#40194 = EDGE_CURVE('',#33630,#40187,#40195,.T.); +#40195 = LINE('',#40196,#40197); +#40196 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#40197 = VECTOR('',#40198,1.); +#40198 = DIRECTION('',(0.,0.,1.)); +#40199 = ORIENTED_EDGE('',*,*,#33637,.F.); +#40200 = PLANE('',#40201); +#40201 = AXIS2_PLACEMENT_3D('',#40202,#40203,#40204); +#40202 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#40203 = DIRECTION('',(0.,1.,0.)); +#40204 = DIRECTION('',(1.,0.,0.)); +#40205 = ADVANCED_FACE('',(#40206),#40224,.F.); +#40206 = FACE_BOUND('',#40207,.F.); +#40207 = EDGE_LOOP('',(#40208,#40209,#40217,#40223)); +#40208 = ORIENTED_EDGE('',*,*,#40194,.T.); +#40209 = ORIENTED_EDGE('',*,*,#40210,.T.); +#40210 = EDGE_CURVE('',#40187,#40211,#40213,.T.); +#40211 = VERTEX_POINT('',#40212); +#40212 = CARTESIAN_POINT('',(6.5,6.75,1.)); +#40213 = LINE('',#40214,#40215); +#40214 = CARTESIAN_POINT('',(6.5,11.25,1.)); +#40215 = VECTOR('',#40216,1.); +#40216 = DIRECTION('',(0.,-1.,0.)); +#40217 = ORIENTED_EDGE('',*,*,#40218,.F.); +#40218 = EDGE_CURVE('',#33622,#40211,#40219,.T.); +#40219 = LINE('',#40220,#40221); +#40220 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#40221 = VECTOR('',#40222,1.); +#40222 = DIRECTION('',(0.,0.,1.)); +#40223 = ORIENTED_EDGE('',*,*,#33629,.F.); +#40224 = PLANE('',#40225); +#40225 = AXIS2_PLACEMENT_3D('',#40226,#40227,#40228); +#40226 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#40227 = DIRECTION('',(1.,0.,0.)); +#40228 = DIRECTION('',(0.,-1.,0.)); +#40229 = ADVANCED_FACE('',(#40230),#40241,.F.); +#40230 = FACE_BOUND('',#40231,.F.); +#40231 = EDGE_LOOP('',(#40232,#40233,#40239,#40240)); +#40232 = ORIENTED_EDGE('',*,*,#40218,.T.); +#40233 = ORIENTED_EDGE('',*,*,#40234,.T.); +#40234 = EDGE_CURVE('',#40211,#39579,#40235,.T.); +#40235 = LINE('',#40236,#40237); +#40236 = CARTESIAN_POINT('',(6.5,6.75,1.)); +#40237 = VECTOR('',#40238,1.); +#40238 = DIRECTION('',(1.,0.,0.)); +#40239 = ORIENTED_EDGE('',*,*,#39578,.F.); +#40240 = ORIENTED_EDGE('',*,*,#33621,.F.); +#40241 = PLANE('',#40242); +#40242 = AXIS2_PLACEMENT_3D('',#40243,#40244,#40245); +#40243 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#40244 = DIRECTION('',(0.,1.,0.)); +#40245 = DIRECTION('',(1.,0.,0.)); +#40246 = ADVANCED_FACE('',(#40247),#40258,.F.); +#40247 = FACE_BOUND('',#40248,.F.); +#40248 = EDGE_LOOP('',(#40249,#40250,#40251,#40252)); +#40249 = ORIENTED_EDGE('',*,*,#33939,.T.); +#40250 = ORIENTED_EDGE('',*,*,#33853,.T.); +#40251 = ORIENTED_EDGE('',*,*,#37687,.F.); +#40252 = ORIENTED_EDGE('',*,*,#40253,.F.); +#40253 = EDGE_CURVE('',#33940,#37688,#40254,.T.); +#40254 = LINE('',#40255,#40256); +#40255 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#40256 = VECTOR('',#40257,1.); +#40257 = DIRECTION('',(0.,0.,1.)); +#40258 = CYLINDRICAL_SURFACE('',#40259,0.275); +#40259 = AXIS2_PLACEMENT_3D('',#40260,#40261,#40262); +#40260 = CARTESIAN_POINT('',(-9.,5.26,0.)); +#40261 = DIRECTION('',(-0.,-0.,-1.)); +#40262 = DIRECTION('',(1.,0.,0.)); +#40263 = ADVANCED_FACE('',(#40264),#40291,.F.); +#40264 = FACE_BOUND('',#40265,.F.); +#40265 = EDGE_LOOP('',(#40266,#40276,#40283,#40284)); +#40266 = ORIENTED_EDGE('',*,*,#40267,.T.); +#40267 = EDGE_CURVE('',#40268,#40270,#40272,.T.); +#40268 = VERTEX_POINT('',#40269); +#40269 = CARTESIAN_POINT('',(9.000000023842,4.985,-2.145767343E-06)); +#40270 = VERTEX_POINT('',#40271); +#40271 = CARTESIAN_POINT('',(9.000000214576,4.985,0.799997854233)); +#40272 = LINE('',#40273,#40274); +#40273 = CARTESIAN_POINT('',(9.000000023842,4.985,-2.14576734264E-06)); +#40274 = VECTOR('',#40275,1.); +#40275 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40276 = ORIENTED_EDGE('',*,*,#40277,.T.); +#40277 = EDGE_CURVE('',#40270,#33886,#40278,.T.); +#40278 = CIRCLE('',#40279,0.275); +#40279 = AXIS2_PLACEMENT_3D('',#40280,#40281,#40282); +#40280 = CARTESIAN_POINT('',(9.000000214576,5.26,0.799997854233)); +#40281 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40282 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40283 = ORIENTED_EDGE('',*,*,#33885,.F.); +#40284 = ORIENTED_EDGE('',*,*,#40285,.F.); +#40285 = EDGE_CURVE('',#40268,#33878,#40286,.T.); +#40286 = CIRCLE('',#40287,0.275); +#40287 = AXIS2_PLACEMENT_3D('',#40288,#40289,#40290); +#40288 = CARTESIAN_POINT('',(9.000000023842,5.26,-2.14576734264E-06)); +#40289 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40290 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40291 = CYLINDRICAL_SURFACE('',#40292,0.275); +#40292 = AXIS2_PLACEMENT_3D('',#40293,#40294,#40295); +#40293 = CARTESIAN_POINT('',(9.000000023842,5.26,-2.14576734264E-06)); +#40294 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#40295 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40296 = ADVANCED_FACE('',(#40297),#40310,.F.); +#40297 = FACE_BOUND('',#40298,.F.); +#40298 = EDGE_LOOP('',(#40299,#40300,#40301,#40302,#40303,#40304)); +#40299 = ORIENTED_EDGE('',*,*,#40285,.T.); +#40300 = ORIENTED_EDGE('',*,*,#33875,.F.); +#40301 = ORIENTED_EDGE('',*,*,#33968,.T.); +#40302 = ORIENTED_EDGE('',*,*,#33993,.T.); +#40303 = ORIENTED_EDGE('',*,*,#34017,.T.); +#40304 = ORIENTED_EDGE('',*,*,#40305,.F.); +#40305 = EDGE_CURVE('',#40268,#34018,#40306,.T.); +#40306 = LINE('',#40307,#40308); +#40307 = CARTESIAN_POINT('',(9.000000023842,4.985,-2.14576734264E-06)); +#40308 = VECTOR('',#40309,1.); +#40309 = DIRECTION('',(0.,-1.,0.)); +#40310 = PLANE('',#40311); +#40311 = AXIS2_PLACEMENT_3D('',#40312,#40313,#40314); +#40312 = CARTESIAN_POINT('',(8.571261919915,5.26,-2.04354820701E-06)); +#40313 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40314 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40315 = ADVANCED_FACE('',(#40316),#40329,.T.); +#40316 = FACE_BOUND('',#40317,.F.); +#40317 = EDGE_LOOP('',(#40318,#40319,#40325,#40326,#40327,#40328)); +#40318 = ORIENTED_EDGE('',*,*,#40277,.F.); +#40319 = ORIENTED_EDGE('',*,*,#40320,.T.); +#40320 = EDGE_CURVE('',#40270,#34090,#40321,.T.); +#40321 = LINE('',#40322,#40323); +#40322 = CARTESIAN_POINT('',(9.000000214576,4.985,0.799997854233)); +#40323 = VECTOR('',#40324,1.); +#40324 = DIRECTION('',(0.,-1.,0.)); +#40325 = ORIENTED_EDGE('',*,*,#37740,.F.); +#40326 = ORIENTED_EDGE('',*,*,#37716,.F.); +#40327 = ORIENTED_EDGE('',*,*,#33917,.F.); +#40328 = ORIENTED_EDGE('',*,*,#33893,.T.); +#40329 = PLANE('',#40330); +#40330 = AXIS2_PLACEMENT_3D('',#40331,#40332,#40333); +#40331 = CARTESIAN_POINT('',(8.57126211065,5.26,0.799997956452)); +#40332 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40333 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40334 = ADVANCED_FACE('',(#40335),#40342,.F.); +#40335 = FACE_BOUND('',#40336,.F.); +#40336 = EDGE_LOOP('',(#40337,#40338,#40339,#40340,#40341)); +#40337 = ORIENTED_EDGE('',*,*,#40253,.T.); +#40338 = ORIENTED_EDGE('',*,*,#37696,.T.); +#40339 = ORIENTED_EDGE('',*,*,#34058,.T.); +#40340 = ORIENTED_EDGE('',*,*,#34066,.T.); +#40341 = ORIENTED_EDGE('',*,*,#33954,.F.); +#40342 = PLANE('',#40343); +#40343 = AXIS2_PLACEMENT_3D('',#40344,#40345,#40346); +#40344 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#40345 = DIRECTION('',(1.,0.,0.)); +#40346 = DIRECTION('',(0.,-1.,0.)); +#40347 = ADVANCED_FACE('',(#40348),#40356,.F.); +#40348 = FACE_BOUND('',#40349,.F.); +#40349 = EDGE_LOOP('',(#40350,#40351,#40352,#40353,#40354,#40355)); +#40350 = ORIENTED_EDGE('',*,*,#40305,.T.); +#40351 = ORIENTED_EDGE('',*,*,#34028,.T.); +#40352 = ORIENTED_EDGE('',*,*,#34081,.F.); +#40353 = ORIENTED_EDGE('',*,*,#34089,.F.); +#40354 = ORIENTED_EDGE('',*,*,#40320,.F.); +#40355 = ORIENTED_EDGE('',*,*,#40267,.F.); +#40356 = PLANE('',#40357); +#40357 = AXIS2_PLACEMENT_3D('',#40358,#40359,#40360); +#40358 = CARTESIAN_POINT('',(9.000000023842,4.985,-2.14576734264E-06)); +#40359 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40360 = DIRECTION('',(0.,1.,0.)); +#40361 = ADVANCED_FACE('',(#40362),#40374,.F.); +#40362 = FACE_BOUND('',#40363,.F.); +#40363 = EDGE_LOOP('',(#40364,#40365,#40366,#40367,#40373)); +#40364 = ORIENTED_EDGE('',*,*,#34043,.F.); +#40365 = ORIENTED_EDGE('',*,*,#34051,.F.); +#40366 = ORIENTED_EDGE('',*,*,#37775,.T.); +#40367 = ORIENTED_EDGE('',*,*,#40368,.F.); +#40368 = EDGE_CURVE('',#34137,#37758,#40369,.T.); +#40369 = LINE('',#40370,#40371); +#40370 = CARTESIAN_POINT('',(-9.,4.265,0.)); +#40371 = VECTOR('',#40372,1.); +#40372 = DIRECTION('',(0.,0.,1.)); +#40373 = ORIENTED_EDGE('',*,*,#34145,.F.); +#40374 = PLANE('',#40375); +#40375 = AXIS2_PLACEMENT_3D('',#40376,#40377,#40378); +#40376 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#40377 = DIRECTION('',(1.,0.,0.)); +#40378 = DIRECTION('',(0.,-1.,0.)); +#40379 = ADVANCED_FACE('',(#40380),#40407,.F.); +#40380 = FACE_BOUND('',#40381,.F.); +#40381 = EDGE_LOOP('',(#40382,#40390,#40398,#40404,#40405,#40406)); +#40382 = ORIENTED_EDGE('',*,*,#40383,.T.); +#40383 = EDGE_CURVE('',#34171,#40384,#40386,.T.); +#40384 = VERTEX_POINT('',#40385); +#40385 = CARTESIAN_POINT('',(9.000000023842,4.265,-2.145767343E-06)); +#40386 = LINE('',#40387,#40388); +#40387 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#40388 = VECTOR('',#40389,1.); +#40389 = DIRECTION('',(0.,-1.,0.)); +#40390 = ORIENTED_EDGE('',*,*,#40391,.T.); +#40391 = EDGE_CURVE('',#40384,#40392,#40394,.T.); +#40392 = VERTEX_POINT('',#40393); +#40393 = CARTESIAN_POINT('',(9.000000214576,4.265,0.799997854233)); +#40394 = LINE('',#40395,#40396); +#40395 = CARTESIAN_POINT('',(9.000000023842,4.265,-2.14576734264E-06)); +#40396 = VECTOR('',#40397,1.); +#40397 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40398 = ORIENTED_EDGE('',*,*,#40399,.F.); +#40399 = EDGE_CURVE('',#34105,#40392,#40400,.T.); +#40400 = LINE('',#40401,#40402); +#40401 = CARTESIAN_POINT('',(9.000000214576,4.44,0.799997854233)); +#40402 = VECTOR('',#40403,1.); +#40403 = DIRECTION('',(0.,-1.,0.)); +#40404 = ORIENTED_EDGE('',*,*,#34112,.T.); +#40405 = ORIENTED_EDGE('',*,*,#34120,.T.); +#40406 = ORIENTED_EDGE('',*,*,#34180,.F.); +#40407 = PLANE('',#40408); +#40408 = AXIS2_PLACEMENT_3D('',#40409,#40410,#40411); +#40409 = CARTESIAN_POINT('',(9.000000023842,4.44,-2.14576734264E-06)); +#40410 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40411 = DIRECTION('',(0.,1.,0.)); +#40412 = ADVANCED_FACE('',(#40413),#40424,.F.); +#40413 = FACE_BOUND('',#40414,.F.); +#40414 = EDGE_LOOP('',(#40415,#40416,#40417,#40418)); +#40415 = ORIENTED_EDGE('',*,*,#34134,.T.); +#40416 = ORIENTED_EDGE('',*,*,#40368,.T.); +#40417 = ORIENTED_EDGE('',*,*,#37755,.F.); +#40418 = ORIENTED_EDGE('',*,*,#40419,.F.); +#40419 = EDGE_CURVE('',#34135,#37756,#40420,.T.); +#40420 = LINE('',#40421,#40422); +#40421 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#40422 = VECTOR('',#40423,1.); +#40423 = DIRECTION('',(0.,0.,1.)); +#40424 = CYLINDRICAL_SURFACE('',#40425,0.275); +#40425 = AXIS2_PLACEMENT_3D('',#40426,#40427,#40428); +#40426 = CARTESIAN_POINT('',(-9.,3.99,0.)); +#40427 = DIRECTION('',(-0.,-0.,-1.)); +#40428 = DIRECTION('',(1.,0.,0.)); +#40429 = ADVANCED_FACE('',(#40430),#40437,.F.); +#40430 = FACE_BOUND('',#40431,.F.); +#40431 = EDGE_LOOP('',(#40432,#40433,#40434,#40435,#40436)); +#40432 = ORIENTED_EDGE('',*,*,#40419,.T.); +#40433 = ORIENTED_EDGE('',*,*,#37766,.T.); +#40434 = ORIENTED_EDGE('',*,*,#34267,.T.); +#40435 = ORIENTED_EDGE('',*,*,#34275,.T.); +#40436 = ORIENTED_EDGE('',*,*,#34156,.F.); +#40437 = PLANE('',#40438); +#40438 = AXIS2_PLACEMENT_3D('',#40439,#40440,#40441); +#40439 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#40440 = DIRECTION('',(1.,0.,0.)); +#40441 = DIRECTION('',(0.,-1.,0.)); +#40442 = ADVANCED_FACE('',(#40443),#40464,.F.); +#40443 = FACE_BOUND('',#40444,.F.); +#40444 = EDGE_LOOP('',(#40445,#40454,#40455,#40456,#40457,#40458)); +#40445 = ORIENTED_EDGE('',*,*,#40446,.T.); +#40446 = EDGE_CURVE('',#40447,#40384,#40449,.T.); +#40447 = VERTEX_POINT('',#40448); +#40448 = CARTESIAN_POINT('',(9.000000023842,3.715,-2.145767343E-06)); +#40449 = CIRCLE('',#40450,0.275); +#40450 = AXIS2_PLACEMENT_3D('',#40451,#40452,#40453); +#40451 = CARTESIAN_POINT('',(9.000000023842,3.99,-2.14576734264E-06)); +#40452 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40453 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40454 = ORIENTED_EDGE('',*,*,#40383,.F.); +#40455 = ORIENTED_EDGE('',*,*,#34170,.T.); +#40456 = ORIENTED_EDGE('',*,*,#34202,.T.); +#40457 = ORIENTED_EDGE('',*,*,#34226,.T.); +#40458 = ORIENTED_EDGE('',*,*,#40459,.F.); +#40459 = EDGE_CURVE('',#40447,#34227,#40460,.T.); +#40460 = LINE('',#40461,#40462); +#40461 = CARTESIAN_POINT('',(9.000000023842,3.715,-2.14576734264E-06)); +#40462 = VECTOR('',#40463,1.); +#40463 = DIRECTION('',(0.,-1.,0.)); +#40464 = PLANE('',#40465); +#40465 = AXIS2_PLACEMENT_3D('',#40466,#40467,#40468); +#40466 = CARTESIAN_POINT('',(8.571261919915,3.99,-2.04354820701E-06)); +#40467 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40468 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40469 = ADVANCED_FACE('',(#40470),#40490,.F.); +#40470 = FACE_BOUND('',#40471,.F.); +#40471 = EDGE_LOOP('',(#40472,#40473,#40474,#40475,#40476,#40484)); +#40472 = ORIENTED_EDGE('',*,*,#40459,.T.); +#40473 = ORIENTED_EDGE('',*,*,#34237,.T.); +#40474 = ORIENTED_EDGE('',*,*,#34290,.F.); +#40475 = ORIENTED_EDGE('',*,*,#34298,.F.); +#40476 = ORIENTED_EDGE('',*,*,#40477,.F.); +#40477 = EDGE_CURVE('',#40478,#34299,#40480,.T.); +#40478 = VERTEX_POINT('',#40479); +#40479 = CARTESIAN_POINT('',(9.000000214576,3.715,0.799997854233)); +#40480 = LINE('',#40481,#40482); +#40481 = CARTESIAN_POINT('',(9.000000214576,3.715,0.799997854233)); +#40482 = VECTOR('',#40483,1.); +#40483 = DIRECTION('',(0.,-1.,0.)); +#40484 = ORIENTED_EDGE('',*,*,#40485,.F.); +#40485 = EDGE_CURVE('',#40447,#40478,#40486,.T.); +#40486 = LINE('',#40487,#40488); +#40487 = CARTESIAN_POINT('',(9.000000023842,3.715,-2.14576734264E-06)); +#40488 = VECTOR('',#40489,1.); +#40489 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40490 = PLANE('',#40491); +#40491 = AXIS2_PLACEMENT_3D('',#40492,#40493,#40494); +#40492 = CARTESIAN_POINT('',(9.000000023842,3.715,-2.14576734264E-06)); +#40493 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40494 = DIRECTION('',(0.,1.,0.)); +#40495 = ADVANCED_FACE('',(#40496),#40508,.F.); +#40496 = FACE_BOUND('',#40497,.F.); +#40497 = EDGE_LOOP('',(#40498,#40499,#40500,#40501,#40507)); +#40498 = ORIENTED_EDGE('',*,*,#34252,.F.); +#40499 = ORIENTED_EDGE('',*,*,#34260,.F.); +#40500 = ORIENTED_EDGE('',*,*,#37874,.T.); +#40501 = ORIENTED_EDGE('',*,*,#40502,.F.); +#40502 = EDGE_CURVE('',#34346,#37857,#40503,.T.); +#40503 = LINE('',#40504,#40505); +#40504 = CARTESIAN_POINT('',(-9.,2.995,0.)); +#40505 = VECTOR('',#40506,1.); +#40506 = DIRECTION('',(0.,0.,1.)); +#40507 = ORIENTED_EDGE('',*,*,#34354,.F.); +#40508 = PLANE('',#40509); +#40509 = AXIS2_PLACEMENT_3D('',#40510,#40511,#40512); +#40510 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#40511 = DIRECTION('',(1.,0.,0.)); +#40512 = DIRECTION('',(0.,-1.,0.)); +#40513 = ADVANCED_FACE('',(#40514),#40541,.F.); +#40514 = FACE_BOUND('',#40515,.F.); +#40515 = EDGE_LOOP('',(#40516,#40524,#40532,#40538,#40539,#40540)); +#40516 = ORIENTED_EDGE('',*,*,#40517,.T.); +#40517 = EDGE_CURVE('',#34380,#40518,#40520,.T.); +#40518 = VERTEX_POINT('',#40519); +#40519 = CARTESIAN_POINT('',(9.000000023842,2.995,-2.145767343E-06)); +#40520 = LINE('',#40521,#40522); +#40521 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#40522 = VECTOR('',#40523,1.); +#40523 = DIRECTION('',(0.,-1.,0.)); +#40524 = ORIENTED_EDGE('',*,*,#40525,.T.); +#40525 = EDGE_CURVE('',#40518,#40526,#40528,.T.); +#40526 = VERTEX_POINT('',#40527); +#40527 = CARTESIAN_POINT('',(9.000000214576,2.995,0.799997854233)); +#40528 = LINE('',#40529,#40530); +#40529 = CARTESIAN_POINT('',(9.000000023842,2.995,-2.14576734264E-06)); +#40530 = VECTOR('',#40531,1.); +#40531 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40532 = ORIENTED_EDGE('',*,*,#40533,.F.); +#40533 = EDGE_CURVE('',#34314,#40526,#40534,.T.); +#40534 = LINE('',#40535,#40536); +#40535 = CARTESIAN_POINT('',(9.000000214576,3.17,0.799997854233)); +#40536 = VECTOR('',#40537,1.); +#40537 = DIRECTION('',(0.,-1.,0.)); +#40538 = ORIENTED_EDGE('',*,*,#34321,.T.); +#40539 = ORIENTED_EDGE('',*,*,#34329,.T.); +#40540 = ORIENTED_EDGE('',*,*,#34389,.F.); +#40541 = PLANE('',#40542); +#40542 = AXIS2_PLACEMENT_3D('',#40543,#40544,#40545); +#40543 = CARTESIAN_POINT('',(9.000000023842,3.17,-2.14576734264E-06)); +#40544 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40545 = DIRECTION('',(0.,1.,0.)); +#40546 = ADVANCED_FACE('',(#40547),#40558,.F.); +#40547 = FACE_BOUND('',#40548,.F.); +#40548 = EDGE_LOOP('',(#40549,#40550,#40551,#40552)); +#40549 = ORIENTED_EDGE('',*,*,#34343,.T.); +#40550 = ORIENTED_EDGE('',*,*,#40502,.T.); +#40551 = ORIENTED_EDGE('',*,*,#37854,.F.); +#40552 = ORIENTED_EDGE('',*,*,#40553,.F.); +#40553 = EDGE_CURVE('',#34344,#37855,#40554,.T.); +#40554 = LINE('',#40555,#40556); +#40555 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#40556 = VECTOR('',#40557,1.); +#40557 = DIRECTION('',(0.,0.,1.)); +#40558 = CYLINDRICAL_SURFACE('',#40559,0.275); +#40559 = AXIS2_PLACEMENT_3D('',#40560,#40561,#40562); +#40560 = CARTESIAN_POINT('',(-9.,2.72,0.)); +#40561 = DIRECTION('',(-0.,-0.,-1.)); +#40562 = DIRECTION('',(1.,0.,0.)); +#40563 = ADVANCED_FACE('',(#40564),#40571,.F.); +#40564 = FACE_BOUND('',#40565,.F.); +#40565 = EDGE_LOOP('',(#40566,#40567,#40568,#40569,#40570)); +#40566 = ORIENTED_EDGE('',*,*,#40553,.T.); +#40567 = ORIENTED_EDGE('',*,*,#37865,.T.); +#40568 = ORIENTED_EDGE('',*,*,#34476,.T.); +#40569 = ORIENTED_EDGE('',*,*,#34484,.T.); +#40570 = ORIENTED_EDGE('',*,*,#34365,.F.); +#40571 = PLANE('',#40572); +#40572 = AXIS2_PLACEMENT_3D('',#40573,#40574,#40575); +#40573 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#40574 = DIRECTION('',(1.,0.,0.)); +#40575 = DIRECTION('',(0.,-1.,0.)); +#40576 = ADVANCED_FACE('',(#40577),#40598,.F.); +#40577 = FACE_BOUND('',#40578,.F.); +#40578 = EDGE_LOOP('',(#40579,#40588,#40589,#40590,#40591,#40592)); +#40579 = ORIENTED_EDGE('',*,*,#40580,.T.); +#40580 = EDGE_CURVE('',#40581,#40518,#40583,.T.); +#40581 = VERTEX_POINT('',#40582); +#40582 = CARTESIAN_POINT('',(9.000000023842,2.445,-2.145767343E-06)); +#40583 = CIRCLE('',#40584,0.275); +#40584 = AXIS2_PLACEMENT_3D('',#40585,#40586,#40587); +#40585 = CARTESIAN_POINT('',(9.000000023842,2.72,-2.14576734264E-06)); +#40586 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40587 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40588 = ORIENTED_EDGE('',*,*,#40517,.F.); +#40589 = ORIENTED_EDGE('',*,*,#34379,.T.); +#40590 = ORIENTED_EDGE('',*,*,#34411,.T.); +#40591 = ORIENTED_EDGE('',*,*,#34435,.T.); +#40592 = ORIENTED_EDGE('',*,*,#40593,.F.); +#40593 = EDGE_CURVE('',#40581,#34436,#40594,.T.); +#40594 = LINE('',#40595,#40596); +#40595 = CARTESIAN_POINT('',(9.000000023842,2.445,-2.14576734264E-06)); +#40596 = VECTOR('',#40597,1.); +#40597 = DIRECTION('',(0.,-1.,0.)); +#40598 = PLANE('',#40599); +#40599 = AXIS2_PLACEMENT_3D('',#40600,#40601,#40602); +#40600 = CARTESIAN_POINT('',(8.571261919915,2.72,-2.04354820701E-06)); +#40601 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40602 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40603 = ADVANCED_FACE('',(#40604),#40624,.F.); +#40604 = FACE_BOUND('',#40605,.F.); +#40605 = EDGE_LOOP('',(#40606,#40607,#40608,#40609,#40610,#40618)); +#40606 = ORIENTED_EDGE('',*,*,#40593,.T.); +#40607 = ORIENTED_EDGE('',*,*,#34446,.T.); +#40608 = ORIENTED_EDGE('',*,*,#34499,.F.); +#40609 = ORIENTED_EDGE('',*,*,#34507,.F.); +#40610 = ORIENTED_EDGE('',*,*,#40611,.F.); +#40611 = EDGE_CURVE('',#40612,#34508,#40614,.T.); +#40612 = VERTEX_POINT('',#40613); +#40613 = CARTESIAN_POINT('',(9.000000214576,2.445,0.799997854233)); +#40614 = LINE('',#40615,#40616); +#40615 = CARTESIAN_POINT('',(9.000000214576,2.445,0.799997854233)); +#40616 = VECTOR('',#40617,1.); +#40617 = DIRECTION('',(0.,-1.,0.)); +#40618 = ORIENTED_EDGE('',*,*,#40619,.F.); +#40619 = EDGE_CURVE('',#40581,#40612,#40620,.T.); +#40620 = LINE('',#40621,#40622); +#40621 = CARTESIAN_POINT('',(9.000000023842,2.445,-2.14576734264E-06)); +#40622 = VECTOR('',#40623,1.); +#40623 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40624 = PLANE('',#40625); +#40625 = AXIS2_PLACEMENT_3D('',#40626,#40627,#40628); +#40626 = CARTESIAN_POINT('',(9.000000023842,2.445,-2.14576734264E-06)); +#40627 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40628 = DIRECTION('',(0.,1.,0.)); +#40629 = ADVANCED_FACE('',(#40630),#40642,.F.); +#40630 = FACE_BOUND('',#40631,.F.); +#40631 = EDGE_LOOP('',(#40632,#40633,#40634,#40635,#40641)); +#40632 = ORIENTED_EDGE('',*,*,#34461,.F.); +#40633 = ORIENTED_EDGE('',*,*,#34469,.F.); +#40634 = ORIENTED_EDGE('',*,*,#37973,.T.); +#40635 = ORIENTED_EDGE('',*,*,#40636,.F.); +#40636 = EDGE_CURVE('',#34555,#37956,#40637,.T.); +#40637 = LINE('',#40638,#40639); +#40638 = CARTESIAN_POINT('',(-9.,1.725,0.)); +#40639 = VECTOR('',#40640,1.); +#40640 = DIRECTION('',(0.,0.,1.)); +#40641 = ORIENTED_EDGE('',*,*,#34563,.F.); +#40642 = PLANE('',#40643); +#40643 = AXIS2_PLACEMENT_3D('',#40644,#40645,#40646); +#40644 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#40645 = DIRECTION('',(1.,0.,0.)); +#40646 = DIRECTION('',(0.,-1.,0.)); +#40647 = ADVANCED_FACE('',(#40648),#40675,.F.); +#40648 = FACE_BOUND('',#40649,.F.); +#40649 = EDGE_LOOP('',(#40650,#40658,#40666,#40672,#40673,#40674)); +#40650 = ORIENTED_EDGE('',*,*,#40651,.T.); +#40651 = EDGE_CURVE('',#34589,#40652,#40654,.T.); +#40652 = VERTEX_POINT('',#40653); +#40653 = CARTESIAN_POINT('',(9.000000023842,1.725,-2.145767343E-06)); +#40654 = LINE('',#40655,#40656); +#40655 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#40656 = VECTOR('',#40657,1.); +#40657 = DIRECTION('',(0.,-1.,0.)); +#40658 = ORIENTED_EDGE('',*,*,#40659,.T.); +#40659 = EDGE_CURVE('',#40652,#40660,#40662,.T.); +#40660 = VERTEX_POINT('',#40661); +#40661 = CARTESIAN_POINT('',(9.000000214576,1.725,0.799997854233)); +#40662 = LINE('',#40663,#40664); +#40663 = CARTESIAN_POINT('',(9.000000023842,1.725,-2.14576734264E-06)); +#40664 = VECTOR('',#40665,1.); +#40665 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40666 = ORIENTED_EDGE('',*,*,#40667,.F.); +#40667 = EDGE_CURVE('',#34523,#40660,#40668,.T.); +#40668 = LINE('',#40669,#40670); +#40669 = CARTESIAN_POINT('',(9.000000214576,1.9,0.799997854233)); +#40670 = VECTOR('',#40671,1.); +#40671 = DIRECTION('',(0.,-1.,0.)); +#40672 = ORIENTED_EDGE('',*,*,#34530,.T.); +#40673 = ORIENTED_EDGE('',*,*,#34538,.T.); +#40674 = ORIENTED_EDGE('',*,*,#34598,.F.); +#40675 = PLANE('',#40676); +#40676 = AXIS2_PLACEMENT_3D('',#40677,#40678,#40679); +#40677 = CARTESIAN_POINT('',(9.000000023842,1.9,-2.14576734264E-06)); +#40678 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40679 = DIRECTION('',(0.,1.,0.)); +#40680 = ADVANCED_FACE('',(#40681),#40692,.F.); +#40681 = FACE_BOUND('',#40682,.F.); +#40682 = EDGE_LOOP('',(#40683,#40684,#40685,#40686)); +#40683 = ORIENTED_EDGE('',*,*,#34552,.T.); +#40684 = ORIENTED_EDGE('',*,*,#40636,.T.); +#40685 = ORIENTED_EDGE('',*,*,#37953,.F.); +#40686 = ORIENTED_EDGE('',*,*,#40687,.F.); +#40687 = EDGE_CURVE('',#34553,#37954,#40688,.T.); +#40688 = LINE('',#40689,#40690); +#40689 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#40690 = VECTOR('',#40691,1.); +#40691 = DIRECTION('',(0.,0.,1.)); +#40692 = CYLINDRICAL_SURFACE('',#40693,0.275); +#40693 = AXIS2_PLACEMENT_3D('',#40694,#40695,#40696); +#40694 = CARTESIAN_POINT('',(-9.,1.45,0.)); +#40695 = DIRECTION('',(-0.,-0.,-1.)); +#40696 = DIRECTION('',(1.,0.,0.)); +#40697 = ADVANCED_FACE('',(#40698),#40705,.F.); +#40698 = FACE_BOUND('',#40699,.F.); +#40699 = EDGE_LOOP('',(#40700,#40701,#40702,#40703,#40704)); +#40700 = ORIENTED_EDGE('',*,*,#40687,.T.); +#40701 = ORIENTED_EDGE('',*,*,#37964,.T.); +#40702 = ORIENTED_EDGE('',*,*,#34685,.T.); +#40703 = ORIENTED_EDGE('',*,*,#34693,.T.); +#40704 = ORIENTED_EDGE('',*,*,#34574,.F.); +#40705 = PLANE('',#40706); +#40706 = AXIS2_PLACEMENT_3D('',#40707,#40708,#40709); +#40707 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#40708 = DIRECTION('',(1.,0.,0.)); +#40709 = DIRECTION('',(0.,-1.,0.)); +#40710 = ADVANCED_FACE('',(#40711),#40732,.F.); +#40711 = FACE_BOUND('',#40712,.F.); +#40712 = EDGE_LOOP('',(#40713,#40722,#40723,#40724,#40725,#40726)); +#40713 = ORIENTED_EDGE('',*,*,#40714,.T.); +#40714 = EDGE_CURVE('',#40715,#40652,#40717,.T.); +#40715 = VERTEX_POINT('',#40716); +#40716 = CARTESIAN_POINT('',(9.000000023842,1.175,-2.145767343E-06)); +#40717 = CIRCLE('',#40718,0.275); +#40718 = AXIS2_PLACEMENT_3D('',#40719,#40720,#40721); +#40719 = CARTESIAN_POINT('',(9.000000023842,1.45,-2.14576734264E-06)); +#40720 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40721 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40722 = ORIENTED_EDGE('',*,*,#40651,.F.); +#40723 = ORIENTED_EDGE('',*,*,#34588,.T.); +#40724 = ORIENTED_EDGE('',*,*,#34620,.T.); +#40725 = ORIENTED_EDGE('',*,*,#34644,.T.); +#40726 = ORIENTED_EDGE('',*,*,#40727,.F.); +#40727 = EDGE_CURVE('',#40715,#34645,#40728,.T.); +#40728 = LINE('',#40729,#40730); +#40729 = CARTESIAN_POINT('',(9.000000023842,1.175,-2.14576734264E-06)); +#40730 = VECTOR('',#40731,1.); +#40731 = DIRECTION('',(0.,-1.,0.)); +#40732 = PLANE('',#40733); +#40733 = AXIS2_PLACEMENT_3D('',#40734,#40735,#40736); +#40734 = CARTESIAN_POINT('',(8.571261919915,1.45,-2.04354820701E-06)); +#40735 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40736 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40737 = ADVANCED_FACE('',(#40738),#40758,.F.); +#40738 = FACE_BOUND('',#40739,.F.); +#40739 = EDGE_LOOP('',(#40740,#40741,#40742,#40743,#40744,#40752)); +#40740 = ORIENTED_EDGE('',*,*,#40727,.T.); +#40741 = ORIENTED_EDGE('',*,*,#34655,.T.); +#40742 = ORIENTED_EDGE('',*,*,#34708,.F.); +#40743 = ORIENTED_EDGE('',*,*,#34716,.F.); +#40744 = ORIENTED_EDGE('',*,*,#40745,.F.); +#40745 = EDGE_CURVE('',#40746,#34717,#40748,.T.); +#40746 = VERTEX_POINT('',#40747); +#40747 = CARTESIAN_POINT('',(9.000000214576,1.175,0.799997854233)); +#40748 = LINE('',#40749,#40750); +#40749 = CARTESIAN_POINT('',(9.000000214576,1.175,0.799997854233)); +#40750 = VECTOR('',#40751,1.); +#40751 = DIRECTION('',(0.,-1.,0.)); +#40752 = ORIENTED_EDGE('',*,*,#40753,.F.); +#40753 = EDGE_CURVE('',#40715,#40746,#40754,.T.); +#40754 = LINE('',#40755,#40756); +#40755 = CARTESIAN_POINT('',(9.000000023842,1.175,-2.14576734264E-06)); +#40756 = VECTOR('',#40757,1.); +#40757 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40758 = PLANE('',#40759); +#40759 = AXIS2_PLACEMENT_3D('',#40760,#40761,#40762); +#40760 = CARTESIAN_POINT('',(9.000000023842,1.175,-2.14576734264E-06)); +#40761 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40762 = DIRECTION('',(0.,1.,0.)); +#40763 = ADVANCED_FACE('',(#40764),#40776,.F.); +#40764 = FACE_BOUND('',#40765,.F.); +#40765 = EDGE_LOOP('',(#40766,#40767,#40768,#40769,#40775)); +#40766 = ORIENTED_EDGE('',*,*,#34670,.F.); +#40767 = ORIENTED_EDGE('',*,*,#34678,.F.); +#40768 = ORIENTED_EDGE('',*,*,#38072,.T.); +#40769 = ORIENTED_EDGE('',*,*,#40770,.F.); +#40770 = EDGE_CURVE('',#34764,#38055,#40771,.T.); +#40771 = LINE('',#40772,#40773); +#40772 = CARTESIAN_POINT('',(-9.,0.455,0.)); +#40773 = VECTOR('',#40774,1.); +#40774 = DIRECTION('',(0.,0.,1.)); +#40775 = ORIENTED_EDGE('',*,*,#34772,.F.); +#40776 = PLANE('',#40777); +#40777 = AXIS2_PLACEMENT_3D('',#40778,#40779,#40780); +#40778 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#40779 = DIRECTION('',(1.,0.,0.)); +#40780 = DIRECTION('',(0.,-1.,0.)); +#40781 = ADVANCED_FACE('',(#40782),#40809,.F.); +#40782 = FACE_BOUND('',#40783,.F.); +#40783 = EDGE_LOOP('',(#40784,#40792,#40800,#40806,#40807,#40808)); +#40784 = ORIENTED_EDGE('',*,*,#40785,.T.); +#40785 = EDGE_CURVE('',#34798,#40786,#40788,.T.); +#40786 = VERTEX_POINT('',#40787); +#40787 = CARTESIAN_POINT('',(9.000000023842,0.455,-2.145767343E-06)); +#40788 = LINE('',#40789,#40790); +#40789 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#40790 = VECTOR('',#40791,1.); +#40791 = DIRECTION('',(0.,-1.,0.)); +#40792 = ORIENTED_EDGE('',*,*,#40793,.T.); +#40793 = EDGE_CURVE('',#40786,#40794,#40796,.T.); +#40794 = VERTEX_POINT('',#40795); +#40795 = CARTESIAN_POINT('',(9.000000214576,0.455,0.799997854233)); +#40796 = LINE('',#40797,#40798); +#40797 = CARTESIAN_POINT('',(9.000000023842,0.455,-2.14576734264E-06)); +#40798 = VECTOR('',#40799,1.); +#40799 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40800 = ORIENTED_EDGE('',*,*,#40801,.F.); +#40801 = EDGE_CURVE('',#34732,#40794,#40802,.T.); +#40802 = LINE('',#40803,#40804); +#40803 = CARTESIAN_POINT('',(9.000000214576,0.63,0.799997854233)); +#40804 = VECTOR('',#40805,1.); +#40805 = DIRECTION('',(0.,-1.,0.)); +#40806 = ORIENTED_EDGE('',*,*,#34739,.T.); +#40807 = ORIENTED_EDGE('',*,*,#34747,.T.); +#40808 = ORIENTED_EDGE('',*,*,#34807,.F.); +#40809 = PLANE('',#40810); +#40810 = AXIS2_PLACEMENT_3D('',#40811,#40812,#40813); +#40811 = CARTESIAN_POINT('',(9.000000023842,0.63,-2.14576734264E-06)); +#40812 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40813 = DIRECTION('',(0.,1.,0.)); +#40814 = ADVANCED_FACE('',(#40815),#40826,.F.); +#40815 = FACE_BOUND('',#40816,.F.); +#40816 = EDGE_LOOP('',(#40817,#40818,#40819,#40820)); +#40817 = ORIENTED_EDGE('',*,*,#34761,.T.); +#40818 = ORIENTED_EDGE('',*,*,#40770,.T.); +#40819 = ORIENTED_EDGE('',*,*,#38052,.F.); +#40820 = ORIENTED_EDGE('',*,*,#40821,.F.); +#40821 = EDGE_CURVE('',#34762,#38053,#40822,.T.); +#40822 = LINE('',#40823,#40824); +#40823 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#40824 = VECTOR('',#40825,1.); +#40825 = DIRECTION('',(0.,0.,1.)); +#40826 = CYLINDRICAL_SURFACE('',#40827,0.275); +#40827 = AXIS2_PLACEMENT_3D('',#40828,#40829,#40830); +#40828 = CARTESIAN_POINT('',(-9.,0.18,0.)); +#40829 = DIRECTION('',(-0.,-0.,-1.)); +#40830 = DIRECTION('',(1.,0.,0.)); +#40831 = ADVANCED_FACE('',(#40832),#40839,.F.); +#40832 = FACE_BOUND('',#40833,.F.); +#40833 = EDGE_LOOP('',(#40834,#40835,#40836,#40837,#40838)); +#40834 = ORIENTED_EDGE('',*,*,#40821,.T.); +#40835 = ORIENTED_EDGE('',*,*,#38063,.T.); +#40836 = ORIENTED_EDGE('',*,*,#34894,.T.); +#40837 = ORIENTED_EDGE('',*,*,#34902,.T.); +#40838 = ORIENTED_EDGE('',*,*,#34783,.F.); +#40839 = PLANE('',#40840); +#40840 = AXIS2_PLACEMENT_3D('',#40841,#40842,#40843); +#40841 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#40842 = DIRECTION('',(1.,0.,0.)); +#40843 = DIRECTION('',(0.,-1.,0.)); +#40844 = ADVANCED_FACE('',(#40845),#40866,.F.); +#40845 = FACE_BOUND('',#40846,.F.); +#40846 = EDGE_LOOP('',(#40847,#40856,#40857,#40858,#40859,#40860)); +#40847 = ORIENTED_EDGE('',*,*,#40848,.T.); +#40848 = EDGE_CURVE('',#40849,#40786,#40851,.T.); +#40849 = VERTEX_POINT('',#40850); +#40850 = CARTESIAN_POINT('',(9.000000023842,-9.5E-02,-2.145767343E-06)); +#40851 = CIRCLE('',#40852,0.275); +#40852 = AXIS2_PLACEMENT_3D('',#40853,#40854,#40855); +#40853 = CARTESIAN_POINT('',(9.000000023842,0.18,-2.14576734264E-06)); +#40854 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40855 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40856 = ORIENTED_EDGE('',*,*,#40785,.F.); +#40857 = ORIENTED_EDGE('',*,*,#34797,.T.); +#40858 = ORIENTED_EDGE('',*,*,#34829,.T.); +#40859 = ORIENTED_EDGE('',*,*,#34853,.T.); +#40860 = ORIENTED_EDGE('',*,*,#40861,.F.); +#40861 = EDGE_CURVE('',#40849,#34854,#40862,.T.); +#40862 = LINE('',#40863,#40864); +#40863 = CARTESIAN_POINT('',(9.000000023842,-9.5E-02,-2.14576734264E-06) + ); +#40864 = VECTOR('',#40865,1.); +#40865 = DIRECTION('',(0.,-1.,0.)); +#40866 = PLANE('',#40867); +#40867 = AXIS2_PLACEMENT_3D('',#40868,#40869,#40870); +#40868 = CARTESIAN_POINT('',(8.571261919915,0.18,-2.04354820701E-06)); +#40869 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40870 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#40871 = ADVANCED_FACE('',(#40872),#40892,.F.); +#40872 = FACE_BOUND('',#40873,.F.); +#40873 = EDGE_LOOP('',(#40874,#40875,#40876,#40877,#40878,#40886)); +#40874 = ORIENTED_EDGE('',*,*,#40861,.T.); +#40875 = ORIENTED_EDGE('',*,*,#34864,.T.); +#40876 = ORIENTED_EDGE('',*,*,#34917,.F.); +#40877 = ORIENTED_EDGE('',*,*,#34925,.F.); +#40878 = ORIENTED_EDGE('',*,*,#40879,.F.); +#40879 = EDGE_CURVE('',#40880,#34926,#40882,.T.); +#40880 = VERTEX_POINT('',#40881); +#40881 = CARTESIAN_POINT('',(9.000000214576,-9.5E-02,0.799997854233)); +#40882 = LINE('',#40883,#40884); +#40883 = CARTESIAN_POINT('',(9.000000214576,-9.5E-02,0.799997854233)); +#40884 = VECTOR('',#40885,1.); +#40885 = DIRECTION('',(0.,-1.,0.)); +#40886 = ORIENTED_EDGE('',*,*,#40887,.F.); +#40887 = EDGE_CURVE('',#40849,#40880,#40888,.T.); +#40888 = LINE('',#40889,#40890); +#40889 = CARTESIAN_POINT('',(9.000000023842,-9.5E-02,-2.14576734264E-06) + ); +#40890 = VECTOR('',#40891,1.); +#40891 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40892 = PLANE('',#40893); +#40893 = AXIS2_PLACEMENT_3D('',#40894,#40895,#40896); +#40894 = CARTESIAN_POINT('',(9.000000023842,-9.5E-02,-2.14576734264E-06) + ); +#40895 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40896 = DIRECTION('',(0.,1.,0.)); +#40897 = ADVANCED_FACE('',(#40898),#40910,.F.); +#40898 = FACE_BOUND('',#40899,.F.); +#40899 = EDGE_LOOP('',(#40900,#40901,#40902,#40903,#40909)); +#40900 = ORIENTED_EDGE('',*,*,#34879,.F.); +#40901 = ORIENTED_EDGE('',*,*,#34887,.F.); +#40902 = ORIENTED_EDGE('',*,*,#38171,.T.); +#40903 = ORIENTED_EDGE('',*,*,#40904,.F.); +#40904 = EDGE_CURVE('',#34973,#38154,#40905,.T.); +#40905 = LINE('',#40906,#40907); +#40906 = CARTESIAN_POINT('',(-9.,-0.815,0.)); +#40907 = VECTOR('',#40908,1.); +#40908 = DIRECTION('',(0.,0.,1.)); +#40909 = ORIENTED_EDGE('',*,*,#34981,.F.); +#40910 = PLANE('',#40911); +#40911 = AXIS2_PLACEMENT_3D('',#40912,#40913,#40914); +#40912 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#40913 = DIRECTION('',(1.,0.,0.)); +#40914 = DIRECTION('',(0.,-1.,0.)); +#40915 = ADVANCED_FACE('',(#40916),#40943,.F.); +#40916 = FACE_BOUND('',#40917,.F.); +#40917 = EDGE_LOOP('',(#40918,#40926,#40934,#40940,#40941,#40942)); +#40918 = ORIENTED_EDGE('',*,*,#40919,.T.); +#40919 = EDGE_CURVE('',#35007,#40920,#40922,.T.); +#40920 = VERTEX_POINT('',#40921); +#40921 = CARTESIAN_POINT('',(9.000000023842,-0.815,-2.145767343E-06)); +#40922 = LINE('',#40923,#40924); +#40923 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#40924 = VECTOR('',#40925,1.); +#40925 = DIRECTION('',(0.,-1.,0.)); +#40926 = ORIENTED_EDGE('',*,*,#40927,.T.); +#40927 = EDGE_CURVE('',#40920,#40928,#40930,.T.); +#40928 = VERTEX_POINT('',#40929); +#40929 = CARTESIAN_POINT('',(9.000000214576,-0.815,0.799997854233)); +#40930 = LINE('',#40931,#40932); +#40931 = CARTESIAN_POINT('',(9.000000023842,-0.815,-2.14576734264E-06)); +#40932 = VECTOR('',#40933,1.); +#40933 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#40934 = ORIENTED_EDGE('',*,*,#40935,.F.); +#40935 = EDGE_CURVE('',#34941,#40928,#40936,.T.); +#40936 = LINE('',#40937,#40938); +#40937 = CARTESIAN_POINT('',(9.000000214576,-0.64,0.799997854233)); +#40938 = VECTOR('',#40939,1.); +#40939 = DIRECTION('',(0.,-1.,0.)); +#40940 = ORIENTED_EDGE('',*,*,#34948,.T.); +#40941 = ORIENTED_EDGE('',*,*,#34956,.T.); +#40942 = ORIENTED_EDGE('',*,*,#35016,.F.); +#40943 = PLANE('',#40944); +#40944 = AXIS2_PLACEMENT_3D('',#40945,#40946,#40947); +#40945 = CARTESIAN_POINT('',(9.000000023842,-0.64,-2.14576734264E-06)); +#40946 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40947 = DIRECTION('',(0.,1.,0.)); +#40948 = ADVANCED_FACE('',(#40949),#40960,.F.); +#40949 = FACE_BOUND('',#40950,.F.); +#40950 = EDGE_LOOP('',(#40951,#40952,#40953,#40954)); +#40951 = ORIENTED_EDGE('',*,*,#34970,.T.); +#40952 = ORIENTED_EDGE('',*,*,#40904,.T.); +#40953 = ORIENTED_EDGE('',*,*,#38151,.F.); +#40954 = ORIENTED_EDGE('',*,*,#40955,.F.); +#40955 = EDGE_CURVE('',#34971,#38152,#40956,.T.); +#40956 = LINE('',#40957,#40958); +#40957 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#40958 = VECTOR('',#40959,1.); +#40959 = DIRECTION('',(0.,0.,1.)); +#40960 = CYLINDRICAL_SURFACE('',#40961,0.275); +#40961 = AXIS2_PLACEMENT_3D('',#40962,#40963,#40964); +#40962 = CARTESIAN_POINT('',(-9.,-1.09,0.)); +#40963 = DIRECTION('',(-0.,-0.,-1.)); +#40964 = DIRECTION('',(1.,0.,0.)); +#40965 = ADVANCED_FACE('',(#40966),#40973,.F.); +#40966 = FACE_BOUND('',#40967,.F.); +#40967 = EDGE_LOOP('',(#40968,#40969,#40970,#40971,#40972)); +#40968 = ORIENTED_EDGE('',*,*,#40955,.T.); +#40969 = ORIENTED_EDGE('',*,*,#38162,.T.); +#40970 = ORIENTED_EDGE('',*,*,#35103,.T.); +#40971 = ORIENTED_EDGE('',*,*,#35111,.T.); +#40972 = ORIENTED_EDGE('',*,*,#34992,.F.); +#40973 = PLANE('',#40974); +#40974 = AXIS2_PLACEMENT_3D('',#40975,#40976,#40977); +#40975 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#40976 = DIRECTION('',(1.,0.,0.)); +#40977 = DIRECTION('',(0.,-1.,0.)); +#40978 = ADVANCED_FACE('',(#40979),#41000,.F.); +#40979 = FACE_BOUND('',#40980,.F.); +#40980 = EDGE_LOOP('',(#40981,#40990,#40991,#40992,#40993,#40994)); +#40981 = ORIENTED_EDGE('',*,*,#40982,.T.); +#40982 = EDGE_CURVE('',#40983,#40920,#40985,.T.); +#40983 = VERTEX_POINT('',#40984); +#40984 = CARTESIAN_POINT('',(9.000000023842,-1.365,-2.145767343E-06)); +#40985 = CIRCLE('',#40986,0.275); +#40986 = AXIS2_PLACEMENT_3D('',#40987,#40988,#40989); +#40987 = CARTESIAN_POINT('',(9.000000023842,-1.09,-2.14576734264E-06)); +#40988 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#40989 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#40990 = ORIENTED_EDGE('',*,*,#40919,.F.); +#40991 = ORIENTED_EDGE('',*,*,#35006,.T.); +#40992 = ORIENTED_EDGE('',*,*,#35038,.T.); +#40993 = ORIENTED_EDGE('',*,*,#35062,.T.); +#40994 = ORIENTED_EDGE('',*,*,#40995,.F.); +#40995 = EDGE_CURVE('',#40983,#35063,#40996,.T.); +#40996 = LINE('',#40997,#40998); +#40997 = CARTESIAN_POINT('',(9.000000023842,-1.365,-2.14576734264E-06)); +#40998 = VECTOR('',#40999,1.); +#40999 = DIRECTION('',(0.,-1.,0.)); +#41000 = PLANE('',#41001); +#41001 = AXIS2_PLACEMENT_3D('',#41002,#41003,#41004); +#41002 = CARTESIAN_POINT('',(8.571261919915,-1.09,-2.04354820701E-06)); +#41003 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41004 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41005 = ADVANCED_FACE('',(#41006),#41026,.F.); +#41006 = FACE_BOUND('',#41007,.F.); +#41007 = EDGE_LOOP('',(#41008,#41009,#41010,#41011,#41012,#41020)); +#41008 = ORIENTED_EDGE('',*,*,#40995,.T.); +#41009 = ORIENTED_EDGE('',*,*,#35073,.T.); +#41010 = ORIENTED_EDGE('',*,*,#35126,.F.); +#41011 = ORIENTED_EDGE('',*,*,#35134,.F.); +#41012 = ORIENTED_EDGE('',*,*,#41013,.F.); +#41013 = EDGE_CURVE('',#41014,#35135,#41016,.T.); +#41014 = VERTEX_POINT('',#41015); +#41015 = CARTESIAN_POINT('',(9.000000214576,-1.365,0.799997854233)); +#41016 = LINE('',#41017,#41018); +#41017 = CARTESIAN_POINT('',(9.000000214576,-1.365,0.799997854233)); +#41018 = VECTOR('',#41019,1.); +#41019 = DIRECTION('',(0.,-1.,0.)); +#41020 = ORIENTED_EDGE('',*,*,#41021,.F.); +#41021 = EDGE_CURVE('',#40983,#41014,#41022,.T.); +#41022 = LINE('',#41023,#41024); +#41023 = CARTESIAN_POINT('',(9.000000023842,-1.365,-2.14576734264E-06)); +#41024 = VECTOR('',#41025,1.); +#41025 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41026 = PLANE('',#41027); +#41027 = AXIS2_PLACEMENT_3D('',#41028,#41029,#41030); +#41028 = CARTESIAN_POINT('',(9.000000023842,-1.365,-2.14576734264E-06)); +#41029 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41030 = DIRECTION('',(0.,1.,0.)); +#41031 = ADVANCED_FACE('',(#41032),#41044,.F.); +#41032 = FACE_BOUND('',#41033,.F.); +#41033 = EDGE_LOOP('',(#41034,#41035,#41036,#41037,#41043)); +#41034 = ORIENTED_EDGE('',*,*,#35088,.F.); +#41035 = ORIENTED_EDGE('',*,*,#35096,.F.); +#41036 = ORIENTED_EDGE('',*,*,#38270,.T.); +#41037 = ORIENTED_EDGE('',*,*,#41038,.F.); +#41038 = EDGE_CURVE('',#35182,#38253,#41039,.T.); +#41039 = LINE('',#41040,#41041); +#41040 = CARTESIAN_POINT('',(-9.,-2.085,0.)); +#41041 = VECTOR('',#41042,1.); +#41042 = DIRECTION('',(0.,0.,1.)); +#41043 = ORIENTED_EDGE('',*,*,#35190,.F.); +#41044 = PLANE('',#41045); +#41045 = AXIS2_PLACEMENT_3D('',#41046,#41047,#41048); +#41046 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#41047 = DIRECTION('',(1.,0.,0.)); +#41048 = DIRECTION('',(0.,-1.,0.)); +#41049 = ADVANCED_FACE('',(#41050),#41077,.F.); +#41050 = FACE_BOUND('',#41051,.F.); +#41051 = EDGE_LOOP('',(#41052,#41060,#41068,#41074,#41075,#41076)); +#41052 = ORIENTED_EDGE('',*,*,#41053,.T.); +#41053 = EDGE_CURVE('',#35216,#41054,#41056,.T.); +#41054 = VERTEX_POINT('',#41055); +#41055 = CARTESIAN_POINT('',(9.000000023842,-2.085,-2.145767343E-06)); +#41056 = LINE('',#41057,#41058); +#41057 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#41058 = VECTOR('',#41059,1.); +#41059 = DIRECTION('',(0.,-1.,0.)); +#41060 = ORIENTED_EDGE('',*,*,#41061,.T.); +#41061 = EDGE_CURVE('',#41054,#41062,#41064,.T.); +#41062 = VERTEX_POINT('',#41063); +#41063 = CARTESIAN_POINT('',(9.000000214576,-2.085,0.799997854233)); +#41064 = LINE('',#41065,#41066); +#41065 = CARTESIAN_POINT('',(9.000000023842,-2.085,-2.14576734264E-06)); +#41066 = VECTOR('',#41067,1.); +#41067 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41068 = ORIENTED_EDGE('',*,*,#41069,.F.); +#41069 = EDGE_CURVE('',#35150,#41062,#41070,.T.); +#41070 = LINE('',#41071,#41072); +#41071 = CARTESIAN_POINT('',(9.000000214576,-1.91,0.799997854233)); +#41072 = VECTOR('',#41073,1.); +#41073 = DIRECTION('',(0.,-1.,0.)); +#41074 = ORIENTED_EDGE('',*,*,#35157,.T.); +#41075 = ORIENTED_EDGE('',*,*,#35165,.T.); +#41076 = ORIENTED_EDGE('',*,*,#35225,.F.); +#41077 = PLANE('',#41078); +#41078 = AXIS2_PLACEMENT_3D('',#41079,#41080,#41081); +#41079 = CARTESIAN_POINT('',(9.000000023842,-1.91,-2.14576734264E-06)); +#41080 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41081 = DIRECTION('',(0.,1.,0.)); +#41082 = ADVANCED_FACE('',(#41083),#41094,.F.); +#41083 = FACE_BOUND('',#41084,.F.); +#41084 = EDGE_LOOP('',(#41085,#41086,#41087,#41088)); +#41085 = ORIENTED_EDGE('',*,*,#35179,.T.); +#41086 = ORIENTED_EDGE('',*,*,#41038,.T.); +#41087 = ORIENTED_EDGE('',*,*,#38250,.F.); +#41088 = ORIENTED_EDGE('',*,*,#41089,.F.); +#41089 = EDGE_CURVE('',#35180,#38251,#41090,.T.); +#41090 = LINE('',#41091,#41092); +#41091 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#41092 = VECTOR('',#41093,1.); +#41093 = DIRECTION('',(0.,0.,1.)); +#41094 = CYLINDRICAL_SURFACE('',#41095,0.275); +#41095 = AXIS2_PLACEMENT_3D('',#41096,#41097,#41098); +#41096 = CARTESIAN_POINT('',(-9.,-2.36,0.)); +#41097 = DIRECTION('',(-0.,-0.,-1.)); +#41098 = DIRECTION('',(1.,0.,0.)); +#41099 = ADVANCED_FACE('',(#41100),#41107,.F.); +#41100 = FACE_BOUND('',#41101,.F.); +#41101 = EDGE_LOOP('',(#41102,#41103,#41104,#41105,#41106)); +#41102 = ORIENTED_EDGE('',*,*,#41089,.T.); +#41103 = ORIENTED_EDGE('',*,*,#38261,.T.); +#41104 = ORIENTED_EDGE('',*,*,#35312,.T.); +#41105 = ORIENTED_EDGE('',*,*,#35320,.T.); +#41106 = ORIENTED_EDGE('',*,*,#35201,.F.); +#41107 = PLANE('',#41108); +#41108 = AXIS2_PLACEMENT_3D('',#41109,#41110,#41111); +#41109 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#41110 = DIRECTION('',(1.,0.,0.)); +#41111 = DIRECTION('',(0.,-1.,0.)); +#41112 = ADVANCED_FACE('',(#41113),#41134,.F.); +#41113 = FACE_BOUND('',#41114,.F.); +#41114 = EDGE_LOOP('',(#41115,#41124,#41125,#41126,#41127,#41128)); +#41115 = ORIENTED_EDGE('',*,*,#41116,.T.); +#41116 = EDGE_CURVE('',#41117,#41054,#41119,.T.); +#41117 = VERTEX_POINT('',#41118); +#41118 = CARTESIAN_POINT('',(9.000000023842,-2.635,-2.145767343E-06)); +#41119 = CIRCLE('',#41120,0.275); +#41120 = AXIS2_PLACEMENT_3D('',#41121,#41122,#41123); +#41121 = CARTESIAN_POINT('',(9.000000023842,-2.36,-2.14576734264E-06)); +#41122 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41123 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41124 = ORIENTED_EDGE('',*,*,#41053,.F.); +#41125 = ORIENTED_EDGE('',*,*,#35215,.T.); +#41126 = ORIENTED_EDGE('',*,*,#35247,.T.); +#41127 = ORIENTED_EDGE('',*,*,#35271,.T.); +#41128 = ORIENTED_EDGE('',*,*,#41129,.F.); +#41129 = EDGE_CURVE('',#41117,#35272,#41130,.T.); +#41130 = LINE('',#41131,#41132); +#41131 = CARTESIAN_POINT('',(9.000000023842,-2.635,-2.14576734264E-06)); +#41132 = VECTOR('',#41133,1.); +#41133 = DIRECTION('',(0.,-1.,0.)); +#41134 = PLANE('',#41135); +#41135 = AXIS2_PLACEMENT_3D('',#41136,#41137,#41138); +#41136 = CARTESIAN_POINT('',(8.571261919915,-2.36,-2.04354820701E-06)); +#41137 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41138 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41139 = ADVANCED_FACE('',(#41140),#41160,.F.); +#41140 = FACE_BOUND('',#41141,.F.); +#41141 = EDGE_LOOP('',(#41142,#41143,#41144,#41145,#41146,#41154)); +#41142 = ORIENTED_EDGE('',*,*,#41129,.T.); +#41143 = ORIENTED_EDGE('',*,*,#35282,.T.); +#41144 = ORIENTED_EDGE('',*,*,#35335,.F.); +#41145 = ORIENTED_EDGE('',*,*,#35343,.F.); +#41146 = ORIENTED_EDGE('',*,*,#41147,.F.); +#41147 = EDGE_CURVE('',#41148,#35344,#41150,.T.); +#41148 = VERTEX_POINT('',#41149); +#41149 = CARTESIAN_POINT('',(9.000000214576,-2.635,0.799997854233)); +#41150 = LINE('',#41151,#41152); +#41151 = CARTESIAN_POINT('',(9.000000214576,-2.635,0.799997854233)); +#41152 = VECTOR('',#41153,1.); +#41153 = DIRECTION('',(0.,-1.,0.)); +#41154 = ORIENTED_EDGE('',*,*,#41155,.F.); +#41155 = EDGE_CURVE('',#41117,#41148,#41156,.T.); +#41156 = LINE('',#41157,#41158); +#41157 = CARTESIAN_POINT('',(9.000000023842,-2.635,-2.14576734264E-06)); +#41158 = VECTOR('',#41159,1.); +#41159 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41160 = PLANE('',#41161); +#41161 = AXIS2_PLACEMENT_3D('',#41162,#41163,#41164); +#41162 = CARTESIAN_POINT('',(9.000000023842,-2.635,-2.14576734264E-06)); +#41163 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41164 = DIRECTION('',(0.,1.,0.)); +#41165 = ADVANCED_FACE('',(#41166),#41178,.F.); +#41166 = FACE_BOUND('',#41167,.F.); +#41167 = EDGE_LOOP('',(#41168,#41169,#41170,#41171,#41177)); +#41168 = ORIENTED_EDGE('',*,*,#35297,.F.); +#41169 = ORIENTED_EDGE('',*,*,#35305,.F.); +#41170 = ORIENTED_EDGE('',*,*,#38369,.T.); +#41171 = ORIENTED_EDGE('',*,*,#41172,.F.); +#41172 = EDGE_CURVE('',#35391,#38352,#41173,.T.); +#41173 = LINE('',#41174,#41175); +#41174 = CARTESIAN_POINT('',(-9.,-3.355,0.)); +#41175 = VECTOR('',#41176,1.); +#41176 = DIRECTION('',(0.,0.,1.)); +#41177 = ORIENTED_EDGE('',*,*,#35399,.F.); +#41178 = PLANE('',#41179); +#41179 = AXIS2_PLACEMENT_3D('',#41180,#41181,#41182); +#41180 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#41181 = DIRECTION('',(1.,0.,0.)); +#41182 = DIRECTION('',(0.,-1.,0.)); +#41183 = ADVANCED_FACE('',(#41184),#41211,.F.); +#41184 = FACE_BOUND('',#41185,.F.); +#41185 = EDGE_LOOP('',(#41186,#41194,#41202,#41208,#41209,#41210)); +#41186 = ORIENTED_EDGE('',*,*,#41187,.T.); +#41187 = EDGE_CURVE('',#35425,#41188,#41190,.T.); +#41188 = VERTEX_POINT('',#41189); +#41189 = CARTESIAN_POINT('',(9.000000023842,-3.355,-2.145767343E-06)); +#41190 = LINE('',#41191,#41192); +#41191 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#41192 = VECTOR('',#41193,1.); +#41193 = DIRECTION('',(0.,-1.,0.)); +#41194 = ORIENTED_EDGE('',*,*,#41195,.T.); +#41195 = EDGE_CURVE('',#41188,#41196,#41198,.T.); +#41196 = VERTEX_POINT('',#41197); +#41197 = CARTESIAN_POINT('',(9.000000214576,-3.355,0.799997854233)); +#41198 = LINE('',#41199,#41200); +#41199 = CARTESIAN_POINT('',(9.000000023842,-3.355,-2.14576734264E-06)); +#41200 = VECTOR('',#41201,1.); +#41201 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41202 = ORIENTED_EDGE('',*,*,#41203,.F.); +#41203 = EDGE_CURVE('',#35359,#41196,#41204,.T.); +#41204 = LINE('',#41205,#41206); +#41205 = CARTESIAN_POINT('',(9.000000214576,-3.18,0.799997854233)); +#41206 = VECTOR('',#41207,1.); +#41207 = DIRECTION('',(0.,-1.,0.)); +#41208 = ORIENTED_EDGE('',*,*,#35366,.T.); +#41209 = ORIENTED_EDGE('',*,*,#35374,.T.); +#41210 = ORIENTED_EDGE('',*,*,#35434,.F.); +#41211 = PLANE('',#41212); +#41212 = AXIS2_PLACEMENT_3D('',#41213,#41214,#41215); +#41213 = CARTESIAN_POINT('',(9.000000023842,-3.18,-2.14576734264E-06)); +#41214 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41215 = DIRECTION('',(0.,1.,0.)); +#41216 = ADVANCED_FACE('',(#41217),#41228,.F.); +#41217 = FACE_BOUND('',#41218,.F.); +#41218 = EDGE_LOOP('',(#41219,#41220,#41221,#41222)); +#41219 = ORIENTED_EDGE('',*,*,#35388,.T.); +#41220 = ORIENTED_EDGE('',*,*,#41172,.T.); +#41221 = ORIENTED_EDGE('',*,*,#38349,.F.); +#41222 = ORIENTED_EDGE('',*,*,#41223,.F.); +#41223 = EDGE_CURVE('',#35389,#38350,#41224,.T.); +#41224 = LINE('',#41225,#41226); +#41225 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#41226 = VECTOR('',#41227,1.); +#41227 = DIRECTION('',(0.,0.,1.)); +#41228 = CYLINDRICAL_SURFACE('',#41229,0.275); +#41229 = AXIS2_PLACEMENT_3D('',#41230,#41231,#41232); +#41230 = CARTESIAN_POINT('',(-9.,-3.63,0.)); +#41231 = DIRECTION('',(-0.,-0.,-1.)); +#41232 = DIRECTION('',(1.,0.,0.)); +#41233 = ADVANCED_FACE('',(#41234),#41241,.F.); +#41234 = FACE_BOUND('',#41235,.F.); +#41235 = EDGE_LOOP('',(#41236,#41237,#41238,#41239,#41240)); +#41236 = ORIENTED_EDGE('',*,*,#41223,.T.); +#41237 = ORIENTED_EDGE('',*,*,#38360,.T.); +#41238 = ORIENTED_EDGE('',*,*,#35521,.T.); +#41239 = ORIENTED_EDGE('',*,*,#35529,.T.); +#41240 = ORIENTED_EDGE('',*,*,#35410,.F.); +#41241 = PLANE('',#41242); +#41242 = AXIS2_PLACEMENT_3D('',#41243,#41244,#41245); +#41243 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#41244 = DIRECTION('',(1.,0.,0.)); +#41245 = DIRECTION('',(0.,-1.,0.)); +#41246 = ADVANCED_FACE('',(#41247),#41268,.F.); +#41247 = FACE_BOUND('',#41248,.F.); +#41248 = EDGE_LOOP('',(#41249,#41258,#41259,#41260,#41261,#41262)); +#41249 = ORIENTED_EDGE('',*,*,#41250,.T.); +#41250 = EDGE_CURVE('',#41251,#41188,#41253,.T.); +#41251 = VERTEX_POINT('',#41252); +#41252 = CARTESIAN_POINT('',(9.000000023842,-3.905,-2.145767343E-06)); +#41253 = CIRCLE('',#41254,0.275); +#41254 = AXIS2_PLACEMENT_3D('',#41255,#41256,#41257); +#41255 = CARTESIAN_POINT('',(9.000000023842,-3.63,-2.14576734264E-06)); +#41256 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41257 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41258 = ORIENTED_EDGE('',*,*,#41187,.F.); +#41259 = ORIENTED_EDGE('',*,*,#35424,.T.); +#41260 = ORIENTED_EDGE('',*,*,#35456,.T.); +#41261 = ORIENTED_EDGE('',*,*,#35480,.T.); +#41262 = ORIENTED_EDGE('',*,*,#41263,.F.); +#41263 = EDGE_CURVE('',#41251,#35481,#41264,.T.); +#41264 = LINE('',#41265,#41266); +#41265 = CARTESIAN_POINT('',(9.000000023842,-3.905,-2.14576734264E-06)); +#41266 = VECTOR('',#41267,1.); +#41267 = DIRECTION('',(0.,-1.,0.)); +#41268 = PLANE('',#41269); +#41269 = AXIS2_PLACEMENT_3D('',#41270,#41271,#41272); +#41270 = CARTESIAN_POINT('',(8.571261919915,-3.63,-2.04354820701E-06)); +#41271 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41272 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41273 = ADVANCED_FACE('',(#41274),#41294,.F.); +#41274 = FACE_BOUND('',#41275,.F.); +#41275 = EDGE_LOOP('',(#41276,#41277,#41278,#41279,#41280,#41288)); +#41276 = ORIENTED_EDGE('',*,*,#41263,.T.); +#41277 = ORIENTED_EDGE('',*,*,#35491,.T.); +#41278 = ORIENTED_EDGE('',*,*,#35544,.F.); +#41279 = ORIENTED_EDGE('',*,*,#35552,.F.); +#41280 = ORIENTED_EDGE('',*,*,#41281,.F.); +#41281 = EDGE_CURVE('',#41282,#35553,#41284,.T.); +#41282 = VERTEX_POINT('',#41283); +#41283 = CARTESIAN_POINT('',(9.000000214576,-3.905,0.799997854233)); +#41284 = LINE('',#41285,#41286); +#41285 = CARTESIAN_POINT('',(9.000000214576,-3.905,0.799997854233)); +#41286 = VECTOR('',#41287,1.); +#41287 = DIRECTION('',(0.,-1.,0.)); +#41288 = ORIENTED_EDGE('',*,*,#41289,.F.); +#41289 = EDGE_CURVE('',#41251,#41282,#41290,.T.); +#41290 = LINE('',#41291,#41292); +#41291 = CARTESIAN_POINT('',(9.000000023842,-3.905,-2.14576734264E-06)); +#41292 = VECTOR('',#41293,1.); +#41293 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41294 = PLANE('',#41295); +#41295 = AXIS2_PLACEMENT_3D('',#41296,#41297,#41298); +#41296 = CARTESIAN_POINT('',(9.000000023842,-3.905,-2.14576734264E-06)); +#41297 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41298 = DIRECTION('',(0.,1.,0.)); +#41299 = ADVANCED_FACE('',(#41300),#41312,.F.); +#41300 = FACE_BOUND('',#41301,.F.); +#41301 = EDGE_LOOP('',(#41302,#41303,#41304,#41305,#41311)); +#41302 = ORIENTED_EDGE('',*,*,#35506,.F.); +#41303 = ORIENTED_EDGE('',*,*,#35514,.F.); +#41304 = ORIENTED_EDGE('',*,*,#38468,.T.); +#41305 = ORIENTED_EDGE('',*,*,#41306,.F.); +#41306 = EDGE_CURVE('',#35600,#38451,#41307,.T.); +#41307 = LINE('',#41308,#41309); +#41308 = CARTESIAN_POINT('',(-9.,-4.625,0.)); +#41309 = VECTOR('',#41310,1.); +#41310 = DIRECTION('',(0.,0.,1.)); +#41311 = ORIENTED_EDGE('',*,*,#35608,.F.); +#41312 = PLANE('',#41313); +#41313 = AXIS2_PLACEMENT_3D('',#41314,#41315,#41316); +#41314 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#41315 = DIRECTION('',(1.,0.,0.)); +#41316 = DIRECTION('',(0.,-1.,0.)); +#41317 = ADVANCED_FACE('',(#41318),#41345,.F.); +#41318 = FACE_BOUND('',#41319,.F.); +#41319 = EDGE_LOOP('',(#41320,#41328,#41336,#41342,#41343,#41344)); +#41320 = ORIENTED_EDGE('',*,*,#41321,.T.); +#41321 = EDGE_CURVE('',#35634,#41322,#41324,.T.); +#41322 = VERTEX_POINT('',#41323); +#41323 = CARTESIAN_POINT('',(9.000000023842,-4.625,-2.145767343E-06)); +#41324 = LINE('',#41325,#41326); +#41325 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#41326 = VECTOR('',#41327,1.); +#41327 = DIRECTION('',(0.,-1.,0.)); +#41328 = ORIENTED_EDGE('',*,*,#41329,.T.); +#41329 = EDGE_CURVE('',#41322,#41330,#41332,.T.); +#41330 = VERTEX_POINT('',#41331); +#41331 = CARTESIAN_POINT('',(9.000000214576,-4.625,0.799997854233)); +#41332 = LINE('',#41333,#41334); +#41333 = CARTESIAN_POINT('',(9.000000023842,-4.625,-2.14576734264E-06)); +#41334 = VECTOR('',#41335,1.); +#41335 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41336 = ORIENTED_EDGE('',*,*,#41337,.F.); +#41337 = EDGE_CURVE('',#35568,#41330,#41338,.T.); +#41338 = LINE('',#41339,#41340); +#41339 = CARTESIAN_POINT('',(9.000000214576,-4.45,0.799997854233)); +#41340 = VECTOR('',#41341,1.); +#41341 = DIRECTION('',(0.,-1.,0.)); +#41342 = ORIENTED_EDGE('',*,*,#35575,.T.); +#41343 = ORIENTED_EDGE('',*,*,#35583,.T.); +#41344 = ORIENTED_EDGE('',*,*,#35643,.F.); +#41345 = PLANE('',#41346); +#41346 = AXIS2_PLACEMENT_3D('',#41347,#41348,#41349); +#41347 = CARTESIAN_POINT('',(9.000000023842,-4.45,-2.14576734264E-06)); +#41348 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41349 = DIRECTION('',(0.,1.,0.)); +#41350 = ADVANCED_FACE('',(#41351),#41362,.F.); +#41351 = FACE_BOUND('',#41352,.F.); +#41352 = EDGE_LOOP('',(#41353,#41354,#41355,#41356)); +#41353 = ORIENTED_EDGE('',*,*,#35597,.T.); +#41354 = ORIENTED_EDGE('',*,*,#41306,.T.); +#41355 = ORIENTED_EDGE('',*,*,#38448,.F.); +#41356 = ORIENTED_EDGE('',*,*,#41357,.F.); +#41357 = EDGE_CURVE('',#35598,#38449,#41358,.T.); +#41358 = LINE('',#41359,#41360); +#41359 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#41360 = VECTOR('',#41361,1.); +#41361 = DIRECTION('',(0.,0.,1.)); +#41362 = CYLINDRICAL_SURFACE('',#41363,0.275); +#41363 = AXIS2_PLACEMENT_3D('',#41364,#41365,#41366); +#41364 = CARTESIAN_POINT('',(-9.,-4.9,0.)); +#41365 = DIRECTION('',(-0.,-0.,-1.)); +#41366 = DIRECTION('',(1.,0.,0.)); +#41367 = ADVANCED_FACE('',(#41368),#41375,.F.); +#41368 = FACE_BOUND('',#41369,.F.); +#41369 = EDGE_LOOP('',(#41370,#41371,#41372,#41373,#41374)); +#41370 = ORIENTED_EDGE('',*,*,#41357,.T.); +#41371 = ORIENTED_EDGE('',*,*,#38459,.T.); +#41372 = ORIENTED_EDGE('',*,*,#35730,.T.); +#41373 = ORIENTED_EDGE('',*,*,#35738,.T.); +#41374 = ORIENTED_EDGE('',*,*,#35619,.F.); +#41375 = PLANE('',#41376); +#41376 = AXIS2_PLACEMENT_3D('',#41377,#41378,#41379); +#41377 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#41378 = DIRECTION('',(1.,0.,0.)); +#41379 = DIRECTION('',(0.,-1.,0.)); +#41380 = ADVANCED_FACE('',(#41381),#41402,.F.); +#41381 = FACE_BOUND('',#41382,.F.); +#41382 = EDGE_LOOP('',(#41383,#41392,#41393,#41394,#41395,#41396)); +#41383 = ORIENTED_EDGE('',*,*,#41384,.T.); +#41384 = EDGE_CURVE('',#41385,#41322,#41387,.T.); +#41385 = VERTEX_POINT('',#41386); +#41386 = CARTESIAN_POINT('',(9.000000023842,-5.175,-2.145767343E-06)); +#41387 = CIRCLE('',#41388,0.275); +#41388 = AXIS2_PLACEMENT_3D('',#41389,#41390,#41391); +#41389 = CARTESIAN_POINT('',(9.000000023842,-4.9,-2.14576734264E-06)); +#41390 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41391 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41392 = ORIENTED_EDGE('',*,*,#41321,.F.); +#41393 = ORIENTED_EDGE('',*,*,#35633,.T.); +#41394 = ORIENTED_EDGE('',*,*,#35665,.T.); +#41395 = ORIENTED_EDGE('',*,*,#35689,.T.); +#41396 = ORIENTED_EDGE('',*,*,#41397,.F.); +#41397 = EDGE_CURVE('',#41385,#35690,#41398,.T.); +#41398 = LINE('',#41399,#41400); +#41399 = CARTESIAN_POINT('',(9.000000023842,-5.175,-2.14576734264E-06)); +#41400 = VECTOR('',#41401,1.); +#41401 = DIRECTION('',(0.,-1.,0.)); +#41402 = PLANE('',#41403); +#41403 = AXIS2_PLACEMENT_3D('',#41404,#41405,#41406); +#41404 = CARTESIAN_POINT('',(8.571261919915,-4.9,-2.04354820701E-06)); +#41405 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41406 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41407 = ADVANCED_FACE('',(#41408),#41428,.F.); +#41408 = FACE_BOUND('',#41409,.F.); +#41409 = EDGE_LOOP('',(#41410,#41411,#41412,#41413,#41414,#41422)); +#41410 = ORIENTED_EDGE('',*,*,#41397,.T.); +#41411 = ORIENTED_EDGE('',*,*,#35700,.T.); +#41412 = ORIENTED_EDGE('',*,*,#35753,.F.); +#41413 = ORIENTED_EDGE('',*,*,#35761,.F.); +#41414 = ORIENTED_EDGE('',*,*,#41415,.F.); +#41415 = EDGE_CURVE('',#41416,#35762,#41418,.T.); +#41416 = VERTEX_POINT('',#41417); +#41417 = CARTESIAN_POINT('',(9.000000214576,-5.175,0.799997854233)); +#41418 = LINE('',#41419,#41420); +#41419 = CARTESIAN_POINT('',(9.000000214576,-5.175,0.799997854233)); +#41420 = VECTOR('',#41421,1.); +#41421 = DIRECTION('',(0.,-1.,0.)); +#41422 = ORIENTED_EDGE('',*,*,#41423,.F.); +#41423 = EDGE_CURVE('',#41385,#41416,#41424,.T.); +#41424 = LINE('',#41425,#41426); +#41425 = CARTESIAN_POINT('',(9.000000023842,-5.175,-2.14576734264E-06)); +#41426 = VECTOR('',#41427,1.); +#41427 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41428 = PLANE('',#41429); +#41429 = AXIS2_PLACEMENT_3D('',#41430,#41431,#41432); +#41430 = CARTESIAN_POINT('',(9.000000023842,-5.175,-2.14576734264E-06)); +#41431 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41432 = DIRECTION('',(0.,1.,0.)); +#41433 = ADVANCED_FACE('',(#41434),#41446,.F.); +#41434 = FACE_BOUND('',#41435,.F.); +#41435 = EDGE_LOOP('',(#41436,#41437,#41438,#41439,#41445)); +#41436 = ORIENTED_EDGE('',*,*,#35715,.F.); +#41437 = ORIENTED_EDGE('',*,*,#35723,.F.); +#41438 = ORIENTED_EDGE('',*,*,#38567,.T.); +#41439 = ORIENTED_EDGE('',*,*,#41440,.F.); +#41440 = EDGE_CURVE('',#35809,#38550,#41441,.T.); +#41441 = LINE('',#41442,#41443); +#41442 = CARTESIAN_POINT('',(-9.,-5.895,0.)); +#41443 = VECTOR('',#41444,1.); +#41444 = DIRECTION('',(0.,0.,1.)); +#41445 = ORIENTED_EDGE('',*,*,#35817,.F.); +#41446 = PLANE('',#41447); +#41447 = AXIS2_PLACEMENT_3D('',#41448,#41449,#41450); +#41448 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#41449 = DIRECTION('',(1.,0.,0.)); +#41450 = DIRECTION('',(0.,-1.,0.)); +#41451 = ADVANCED_FACE('',(#41452),#41479,.F.); +#41452 = FACE_BOUND('',#41453,.F.); +#41453 = EDGE_LOOP('',(#41454,#41462,#41470,#41476,#41477,#41478)); +#41454 = ORIENTED_EDGE('',*,*,#41455,.T.); +#41455 = EDGE_CURVE('',#35843,#41456,#41458,.T.); +#41456 = VERTEX_POINT('',#41457); +#41457 = CARTESIAN_POINT('',(9.000000023842,-5.895,-2.145767343E-06)); +#41458 = LINE('',#41459,#41460); +#41459 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#41460 = VECTOR('',#41461,1.); +#41461 = DIRECTION('',(0.,-1.,0.)); +#41462 = ORIENTED_EDGE('',*,*,#41463,.T.); +#41463 = EDGE_CURVE('',#41456,#41464,#41466,.T.); +#41464 = VERTEX_POINT('',#41465); +#41465 = CARTESIAN_POINT('',(9.000000214576,-5.895,0.799997854233)); +#41466 = LINE('',#41467,#41468); +#41467 = CARTESIAN_POINT('',(9.000000023842,-5.895,-2.14576734264E-06)); +#41468 = VECTOR('',#41469,1.); +#41469 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41470 = ORIENTED_EDGE('',*,*,#41471,.F.); +#41471 = EDGE_CURVE('',#35777,#41464,#41472,.T.); +#41472 = LINE('',#41473,#41474); +#41473 = CARTESIAN_POINT('',(9.000000214576,-5.72,0.799997854233)); +#41474 = VECTOR('',#41475,1.); +#41475 = DIRECTION('',(0.,-1.,0.)); +#41476 = ORIENTED_EDGE('',*,*,#35784,.T.); +#41477 = ORIENTED_EDGE('',*,*,#35792,.T.); +#41478 = ORIENTED_EDGE('',*,*,#35852,.F.); +#41479 = PLANE('',#41480); +#41480 = AXIS2_PLACEMENT_3D('',#41481,#41482,#41483); +#41481 = CARTESIAN_POINT('',(9.000000023842,-5.72,-2.14576734264E-06)); +#41482 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41483 = DIRECTION('',(0.,1.,0.)); +#41484 = ADVANCED_FACE('',(#41485),#41496,.F.); +#41485 = FACE_BOUND('',#41486,.F.); +#41486 = EDGE_LOOP('',(#41487,#41488,#41489,#41490)); +#41487 = ORIENTED_EDGE('',*,*,#35806,.T.); +#41488 = ORIENTED_EDGE('',*,*,#41440,.T.); +#41489 = ORIENTED_EDGE('',*,*,#38547,.F.); +#41490 = ORIENTED_EDGE('',*,*,#41491,.F.); +#41491 = EDGE_CURVE('',#35807,#38548,#41492,.T.); +#41492 = LINE('',#41493,#41494); +#41493 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#41494 = VECTOR('',#41495,1.); +#41495 = DIRECTION('',(0.,0.,1.)); +#41496 = CYLINDRICAL_SURFACE('',#41497,0.275); +#41497 = AXIS2_PLACEMENT_3D('',#41498,#41499,#41500); +#41498 = CARTESIAN_POINT('',(-9.,-6.17,0.)); +#41499 = DIRECTION('',(-0.,-0.,-1.)); +#41500 = DIRECTION('',(1.,0.,0.)); +#41501 = ADVANCED_FACE('',(#41502),#41509,.F.); +#41502 = FACE_BOUND('',#41503,.F.); +#41503 = EDGE_LOOP('',(#41504,#41505,#41506,#41507,#41508)); +#41504 = ORIENTED_EDGE('',*,*,#41491,.T.); +#41505 = ORIENTED_EDGE('',*,*,#38558,.T.); +#41506 = ORIENTED_EDGE('',*,*,#35939,.T.); +#41507 = ORIENTED_EDGE('',*,*,#35947,.T.); +#41508 = ORIENTED_EDGE('',*,*,#35828,.F.); +#41509 = PLANE('',#41510); +#41510 = AXIS2_PLACEMENT_3D('',#41511,#41512,#41513); +#41511 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#41512 = DIRECTION('',(1.,0.,0.)); +#41513 = DIRECTION('',(0.,-1.,0.)); +#41514 = ADVANCED_FACE('',(#41515),#41536,.F.); +#41515 = FACE_BOUND('',#41516,.F.); +#41516 = EDGE_LOOP('',(#41517,#41526,#41527,#41528,#41529,#41530)); +#41517 = ORIENTED_EDGE('',*,*,#41518,.T.); +#41518 = EDGE_CURVE('',#41519,#41456,#41521,.T.); +#41519 = VERTEX_POINT('',#41520); +#41520 = CARTESIAN_POINT('',(9.000000023842,-6.445,-2.145767343E-06)); +#41521 = CIRCLE('',#41522,0.275); +#41522 = AXIS2_PLACEMENT_3D('',#41523,#41524,#41525); +#41523 = CARTESIAN_POINT('',(9.000000023842,-6.17,-2.14576734264E-06)); +#41524 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41525 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41526 = ORIENTED_EDGE('',*,*,#41455,.F.); +#41527 = ORIENTED_EDGE('',*,*,#35842,.T.); +#41528 = ORIENTED_EDGE('',*,*,#35874,.T.); +#41529 = ORIENTED_EDGE('',*,*,#35898,.T.); +#41530 = ORIENTED_EDGE('',*,*,#41531,.F.); +#41531 = EDGE_CURVE('',#41519,#35899,#41532,.T.); +#41532 = LINE('',#41533,#41534); +#41533 = CARTESIAN_POINT('',(9.000000023842,-6.445,-2.14576734264E-06)); +#41534 = VECTOR('',#41535,1.); +#41535 = DIRECTION('',(0.,-1.,0.)); +#41536 = PLANE('',#41537); +#41537 = AXIS2_PLACEMENT_3D('',#41538,#41539,#41540); +#41538 = CARTESIAN_POINT('',(8.571261919915,-6.17,-2.04354820701E-06)); +#41539 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41540 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41541 = ADVANCED_FACE('',(#41542),#41562,.F.); +#41542 = FACE_BOUND('',#41543,.F.); +#41543 = EDGE_LOOP('',(#41544,#41545,#41546,#41547,#41548,#41556)); +#41544 = ORIENTED_EDGE('',*,*,#41531,.T.); +#41545 = ORIENTED_EDGE('',*,*,#35909,.T.); +#41546 = ORIENTED_EDGE('',*,*,#35962,.F.); +#41547 = ORIENTED_EDGE('',*,*,#35970,.F.); +#41548 = ORIENTED_EDGE('',*,*,#41549,.F.); +#41549 = EDGE_CURVE('',#41550,#35971,#41552,.T.); +#41550 = VERTEX_POINT('',#41551); +#41551 = CARTESIAN_POINT('',(9.000000214576,-6.445,0.799997854233)); +#41552 = LINE('',#41553,#41554); +#41553 = CARTESIAN_POINT('',(9.000000214576,-6.445,0.799997854233)); +#41554 = VECTOR('',#41555,1.); +#41555 = DIRECTION('',(0.,-1.,0.)); +#41556 = ORIENTED_EDGE('',*,*,#41557,.F.); +#41557 = EDGE_CURVE('',#41519,#41550,#41558,.T.); +#41558 = LINE('',#41559,#41560); +#41559 = CARTESIAN_POINT('',(9.000000023842,-6.445,-2.14576734264E-06)); +#41560 = VECTOR('',#41561,1.); +#41561 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41562 = PLANE('',#41563); +#41563 = AXIS2_PLACEMENT_3D('',#41564,#41565,#41566); +#41564 = CARTESIAN_POINT('',(9.000000023842,-6.445,-2.14576734264E-06)); +#41565 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41566 = DIRECTION('',(0.,1.,0.)); +#41567 = ADVANCED_FACE('',(#41568),#41580,.F.); +#41568 = FACE_BOUND('',#41569,.F.); +#41569 = EDGE_LOOP('',(#41570,#41571,#41572,#41573,#41579)); +#41570 = ORIENTED_EDGE('',*,*,#35924,.F.); +#41571 = ORIENTED_EDGE('',*,*,#35932,.F.); +#41572 = ORIENTED_EDGE('',*,*,#38666,.T.); +#41573 = ORIENTED_EDGE('',*,*,#41574,.F.); +#41574 = EDGE_CURVE('',#36018,#38649,#41575,.T.); +#41575 = LINE('',#41576,#41577); +#41576 = CARTESIAN_POINT('',(-9.,-7.165,0.)); +#41577 = VECTOR('',#41578,1.); +#41578 = DIRECTION('',(0.,0.,1.)); +#41579 = ORIENTED_EDGE('',*,*,#36026,.F.); +#41580 = PLANE('',#41581); +#41581 = AXIS2_PLACEMENT_3D('',#41582,#41583,#41584); +#41582 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#41583 = DIRECTION('',(1.,0.,0.)); +#41584 = DIRECTION('',(0.,-1.,0.)); +#41585 = ADVANCED_FACE('',(#41586),#41613,.F.); +#41586 = FACE_BOUND('',#41587,.F.); +#41587 = EDGE_LOOP('',(#41588,#41596,#41604,#41610,#41611,#41612)); +#41588 = ORIENTED_EDGE('',*,*,#41589,.T.); +#41589 = EDGE_CURVE('',#36052,#41590,#41592,.T.); +#41590 = VERTEX_POINT('',#41591); +#41591 = CARTESIAN_POINT('',(9.000000023842,-7.165,-2.145767343E-06)); +#41592 = LINE('',#41593,#41594); +#41593 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#41594 = VECTOR('',#41595,1.); +#41595 = DIRECTION('',(0.,-1.,0.)); +#41596 = ORIENTED_EDGE('',*,*,#41597,.T.); +#41597 = EDGE_CURVE('',#41590,#41598,#41600,.T.); +#41598 = VERTEX_POINT('',#41599); +#41599 = CARTESIAN_POINT('',(9.000000214576,-7.165,0.799997854233)); +#41600 = LINE('',#41601,#41602); +#41601 = CARTESIAN_POINT('',(9.000000023842,-7.165,-2.14576734264E-06)); +#41602 = VECTOR('',#41603,1.); +#41603 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41604 = ORIENTED_EDGE('',*,*,#41605,.F.); +#41605 = EDGE_CURVE('',#35986,#41598,#41606,.T.); +#41606 = LINE('',#41607,#41608); +#41607 = CARTESIAN_POINT('',(9.000000214576,-6.99,0.799997854233)); +#41608 = VECTOR('',#41609,1.); +#41609 = DIRECTION('',(0.,-1.,0.)); +#41610 = ORIENTED_EDGE('',*,*,#35993,.T.); +#41611 = ORIENTED_EDGE('',*,*,#36001,.T.); +#41612 = ORIENTED_EDGE('',*,*,#36061,.F.); +#41613 = PLANE('',#41614); +#41614 = AXIS2_PLACEMENT_3D('',#41615,#41616,#41617); +#41615 = CARTESIAN_POINT('',(9.000000023842,-6.99,-2.14576734264E-06)); +#41616 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41617 = DIRECTION('',(0.,1.,0.)); +#41618 = ADVANCED_FACE('',(#41619),#41630,.F.); +#41619 = FACE_BOUND('',#41620,.F.); +#41620 = EDGE_LOOP('',(#41621,#41622,#41623,#41624)); +#41621 = ORIENTED_EDGE('',*,*,#36015,.T.); +#41622 = ORIENTED_EDGE('',*,*,#41574,.T.); +#41623 = ORIENTED_EDGE('',*,*,#38646,.F.); +#41624 = ORIENTED_EDGE('',*,*,#41625,.F.); +#41625 = EDGE_CURVE('',#36016,#38647,#41626,.T.); +#41626 = LINE('',#41627,#41628); +#41627 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#41628 = VECTOR('',#41629,1.); +#41629 = DIRECTION('',(0.,0.,1.)); +#41630 = CYLINDRICAL_SURFACE('',#41631,0.275); +#41631 = AXIS2_PLACEMENT_3D('',#41632,#41633,#41634); +#41632 = CARTESIAN_POINT('',(-9.,-7.44,0.)); +#41633 = DIRECTION('',(-0.,-0.,-1.)); +#41634 = DIRECTION('',(1.,0.,0.)); +#41635 = ADVANCED_FACE('',(#41636),#41643,.F.); +#41636 = FACE_BOUND('',#41637,.F.); +#41637 = EDGE_LOOP('',(#41638,#41639,#41640,#41641,#41642)); +#41638 = ORIENTED_EDGE('',*,*,#41625,.T.); +#41639 = ORIENTED_EDGE('',*,*,#38657,.T.); +#41640 = ORIENTED_EDGE('',*,*,#36148,.T.); +#41641 = ORIENTED_EDGE('',*,*,#36156,.T.); +#41642 = ORIENTED_EDGE('',*,*,#36037,.F.); +#41643 = PLANE('',#41644); +#41644 = AXIS2_PLACEMENT_3D('',#41645,#41646,#41647); +#41645 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#41646 = DIRECTION('',(1.,0.,0.)); +#41647 = DIRECTION('',(0.,-1.,0.)); +#41648 = ADVANCED_FACE('',(#41649),#41670,.F.); +#41649 = FACE_BOUND('',#41650,.F.); +#41650 = EDGE_LOOP('',(#41651,#41660,#41661,#41662,#41663,#41664)); +#41651 = ORIENTED_EDGE('',*,*,#41652,.T.); +#41652 = EDGE_CURVE('',#41653,#41590,#41655,.T.); +#41653 = VERTEX_POINT('',#41654); +#41654 = CARTESIAN_POINT('',(9.000000023842,-7.715,-2.145767343E-06)); +#41655 = CIRCLE('',#41656,0.275); +#41656 = AXIS2_PLACEMENT_3D('',#41657,#41658,#41659); +#41657 = CARTESIAN_POINT('',(9.000000023842,-7.44,-2.14576734264E-06)); +#41658 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41659 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41660 = ORIENTED_EDGE('',*,*,#41589,.F.); +#41661 = ORIENTED_EDGE('',*,*,#36051,.T.); +#41662 = ORIENTED_EDGE('',*,*,#36083,.T.); +#41663 = ORIENTED_EDGE('',*,*,#36107,.T.); +#41664 = ORIENTED_EDGE('',*,*,#41665,.F.); +#41665 = EDGE_CURVE('',#41653,#36108,#41666,.T.); +#41666 = LINE('',#41667,#41668); +#41667 = CARTESIAN_POINT('',(9.000000023842,-7.715,-2.14576734264E-06)); +#41668 = VECTOR('',#41669,1.); +#41669 = DIRECTION('',(0.,-1.,0.)); +#41670 = PLANE('',#41671); +#41671 = AXIS2_PLACEMENT_3D('',#41672,#41673,#41674); +#41672 = CARTESIAN_POINT('',(8.571261919915,-7.44,-2.04354820701E-06)); +#41673 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41674 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41675 = ADVANCED_FACE('',(#41676),#41696,.F.); +#41676 = FACE_BOUND('',#41677,.F.); +#41677 = EDGE_LOOP('',(#41678,#41679,#41680,#41681,#41682,#41690)); +#41678 = ORIENTED_EDGE('',*,*,#41665,.T.); +#41679 = ORIENTED_EDGE('',*,*,#36118,.T.); +#41680 = ORIENTED_EDGE('',*,*,#36171,.F.); +#41681 = ORIENTED_EDGE('',*,*,#36179,.F.); +#41682 = ORIENTED_EDGE('',*,*,#41683,.F.); +#41683 = EDGE_CURVE('',#41684,#36180,#41686,.T.); +#41684 = VERTEX_POINT('',#41685); +#41685 = CARTESIAN_POINT('',(9.000000214576,-7.715,0.799997854233)); +#41686 = LINE('',#41687,#41688); +#41687 = CARTESIAN_POINT('',(9.000000214576,-7.715,0.799997854233)); +#41688 = VECTOR('',#41689,1.); +#41689 = DIRECTION('',(0.,-1.,0.)); +#41690 = ORIENTED_EDGE('',*,*,#41691,.F.); +#41691 = EDGE_CURVE('',#41653,#41684,#41692,.T.); +#41692 = LINE('',#41693,#41694); +#41693 = CARTESIAN_POINT('',(9.000000023842,-7.715,-2.14576734264E-06)); +#41694 = VECTOR('',#41695,1.); +#41695 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41696 = PLANE('',#41697); +#41697 = AXIS2_PLACEMENT_3D('',#41698,#41699,#41700); +#41698 = CARTESIAN_POINT('',(9.000000023842,-7.715,-2.14576734264E-06)); +#41699 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41700 = DIRECTION('',(0.,1.,0.)); +#41701 = ADVANCED_FACE('',(#41702),#41714,.F.); +#41702 = FACE_BOUND('',#41703,.F.); +#41703 = EDGE_LOOP('',(#41704,#41705,#41706,#41707,#41713)); +#41704 = ORIENTED_EDGE('',*,*,#36133,.F.); +#41705 = ORIENTED_EDGE('',*,*,#36141,.F.); +#41706 = ORIENTED_EDGE('',*,*,#38765,.T.); +#41707 = ORIENTED_EDGE('',*,*,#41708,.F.); +#41708 = EDGE_CURVE('',#36227,#38748,#41709,.T.); +#41709 = LINE('',#41710,#41711); +#41710 = CARTESIAN_POINT('',(-9.,-8.435,0.)); +#41711 = VECTOR('',#41712,1.); +#41712 = DIRECTION('',(0.,0.,1.)); +#41713 = ORIENTED_EDGE('',*,*,#36235,.F.); +#41714 = PLANE('',#41715); +#41715 = AXIS2_PLACEMENT_3D('',#41716,#41717,#41718); +#41716 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#41717 = DIRECTION('',(1.,0.,0.)); +#41718 = DIRECTION('',(0.,-1.,0.)); +#41719 = ADVANCED_FACE('',(#41720),#41747,.F.); +#41720 = FACE_BOUND('',#41721,.F.); +#41721 = EDGE_LOOP('',(#41722,#41730,#41738,#41744,#41745,#41746)); +#41722 = ORIENTED_EDGE('',*,*,#41723,.T.); +#41723 = EDGE_CURVE('',#36261,#41724,#41726,.T.); +#41724 = VERTEX_POINT('',#41725); +#41725 = CARTESIAN_POINT('',(9.000000023842,-8.435,-2.145767343E-06)); +#41726 = LINE('',#41727,#41728); +#41727 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#41728 = VECTOR('',#41729,1.); +#41729 = DIRECTION('',(0.,-1.,0.)); +#41730 = ORIENTED_EDGE('',*,*,#41731,.T.); +#41731 = EDGE_CURVE('',#41724,#41732,#41734,.T.); +#41732 = VERTEX_POINT('',#41733); +#41733 = CARTESIAN_POINT('',(9.000000214576,-8.435,0.799997854233)); +#41734 = LINE('',#41735,#41736); +#41735 = CARTESIAN_POINT('',(9.000000023842,-8.435,-2.14576734264E-06)); +#41736 = VECTOR('',#41737,1.); +#41737 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41738 = ORIENTED_EDGE('',*,*,#41739,.F.); +#41739 = EDGE_CURVE('',#36195,#41732,#41740,.T.); +#41740 = LINE('',#41741,#41742); +#41741 = CARTESIAN_POINT('',(9.000000214576,-8.26,0.799997854233)); +#41742 = VECTOR('',#41743,1.); +#41743 = DIRECTION('',(0.,-1.,0.)); +#41744 = ORIENTED_EDGE('',*,*,#36202,.T.); +#41745 = ORIENTED_EDGE('',*,*,#36210,.T.); +#41746 = ORIENTED_EDGE('',*,*,#36270,.F.); +#41747 = PLANE('',#41748); +#41748 = AXIS2_PLACEMENT_3D('',#41749,#41750,#41751); +#41749 = CARTESIAN_POINT('',(9.000000023842,-8.26,-2.14576734264E-06)); +#41750 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41751 = DIRECTION('',(0.,1.,0.)); +#41752 = ADVANCED_FACE('',(#41753),#41764,.F.); +#41753 = FACE_BOUND('',#41754,.F.); +#41754 = EDGE_LOOP('',(#41755,#41756,#41757,#41758)); +#41755 = ORIENTED_EDGE('',*,*,#36224,.T.); +#41756 = ORIENTED_EDGE('',*,*,#41708,.T.); +#41757 = ORIENTED_EDGE('',*,*,#38745,.F.); +#41758 = ORIENTED_EDGE('',*,*,#41759,.F.); +#41759 = EDGE_CURVE('',#36225,#38746,#41760,.T.); +#41760 = LINE('',#41761,#41762); +#41761 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#41762 = VECTOR('',#41763,1.); +#41763 = DIRECTION('',(0.,0.,1.)); +#41764 = CYLINDRICAL_SURFACE('',#41765,0.275); +#41765 = AXIS2_PLACEMENT_3D('',#41766,#41767,#41768); +#41766 = CARTESIAN_POINT('',(-9.,-8.71,0.)); +#41767 = DIRECTION('',(-0.,-0.,-1.)); +#41768 = DIRECTION('',(1.,0.,0.)); +#41769 = ADVANCED_FACE('',(#41770),#41777,.F.); +#41770 = FACE_BOUND('',#41771,.F.); +#41771 = EDGE_LOOP('',(#41772,#41773,#41774,#41775,#41776)); +#41772 = ORIENTED_EDGE('',*,*,#41759,.T.); +#41773 = ORIENTED_EDGE('',*,*,#38756,.T.); +#41774 = ORIENTED_EDGE('',*,*,#36357,.T.); +#41775 = ORIENTED_EDGE('',*,*,#36365,.T.); +#41776 = ORIENTED_EDGE('',*,*,#36246,.F.); +#41777 = PLANE('',#41778); +#41778 = AXIS2_PLACEMENT_3D('',#41779,#41780,#41781); +#41779 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#41780 = DIRECTION('',(1.,0.,0.)); +#41781 = DIRECTION('',(0.,-1.,0.)); +#41782 = ADVANCED_FACE('',(#41783),#41804,.F.); +#41783 = FACE_BOUND('',#41784,.F.); +#41784 = EDGE_LOOP('',(#41785,#41794,#41795,#41796,#41797,#41798)); +#41785 = ORIENTED_EDGE('',*,*,#41786,.T.); +#41786 = EDGE_CURVE('',#41787,#41724,#41789,.T.); +#41787 = VERTEX_POINT('',#41788); +#41788 = CARTESIAN_POINT('',(9.000000023842,-8.985,-2.145767343E-06)); +#41789 = CIRCLE('',#41790,0.275); +#41790 = AXIS2_PLACEMENT_3D('',#41791,#41792,#41793); +#41791 = CARTESIAN_POINT('',(9.000000023842,-8.71,-2.14576734264E-06)); +#41792 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41793 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41794 = ORIENTED_EDGE('',*,*,#41723,.F.); +#41795 = ORIENTED_EDGE('',*,*,#36260,.T.); +#41796 = ORIENTED_EDGE('',*,*,#36292,.T.); +#41797 = ORIENTED_EDGE('',*,*,#36316,.T.); +#41798 = ORIENTED_EDGE('',*,*,#41799,.F.); +#41799 = EDGE_CURVE('',#41787,#36317,#41800,.T.); +#41800 = LINE('',#41801,#41802); +#41801 = CARTESIAN_POINT('',(9.000000023842,-8.985,-2.14576734264E-06)); +#41802 = VECTOR('',#41803,1.); +#41803 = DIRECTION('',(0.,-1.,0.)); +#41804 = PLANE('',#41805); +#41805 = AXIS2_PLACEMENT_3D('',#41806,#41807,#41808); +#41806 = CARTESIAN_POINT('',(8.571261919915,-8.71,-2.04354820701E-06)); +#41807 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41808 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41809 = ADVANCED_FACE('',(#41810),#41830,.F.); +#41810 = FACE_BOUND('',#41811,.F.); +#41811 = EDGE_LOOP('',(#41812,#41813,#41814,#41815,#41816,#41824)); +#41812 = ORIENTED_EDGE('',*,*,#41799,.T.); +#41813 = ORIENTED_EDGE('',*,*,#36327,.T.); +#41814 = ORIENTED_EDGE('',*,*,#36380,.F.); +#41815 = ORIENTED_EDGE('',*,*,#36388,.F.); +#41816 = ORIENTED_EDGE('',*,*,#41817,.F.); +#41817 = EDGE_CURVE('',#41818,#36389,#41820,.T.); +#41818 = VERTEX_POINT('',#41819); +#41819 = CARTESIAN_POINT('',(9.000000214576,-8.985,0.799997854233)); +#41820 = LINE('',#41821,#41822); +#41821 = CARTESIAN_POINT('',(9.000000214576,-8.985,0.799997854233)); +#41822 = VECTOR('',#41823,1.); +#41823 = DIRECTION('',(0.,-1.,0.)); +#41824 = ORIENTED_EDGE('',*,*,#41825,.F.); +#41825 = EDGE_CURVE('',#41787,#41818,#41826,.T.); +#41826 = LINE('',#41827,#41828); +#41827 = CARTESIAN_POINT('',(9.000000023842,-8.985,-2.14576734264E-06)); +#41828 = VECTOR('',#41829,1.); +#41829 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41830 = PLANE('',#41831); +#41831 = AXIS2_PLACEMENT_3D('',#41832,#41833,#41834); +#41832 = CARTESIAN_POINT('',(9.000000023842,-8.985,-2.14576734264E-06)); +#41833 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41834 = DIRECTION('',(0.,1.,0.)); +#41835 = ADVANCED_FACE('',(#41836),#41848,.F.); +#41836 = FACE_BOUND('',#41837,.F.); +#41837 = EDGE_LOOP('',(#41838,#41839,#41840,#41841,#41847)); +#41838 = ORIENTED_EDGE('',*,*,#36342,.F.); +#41839 = ORIENTED_EDGE('',*,*,#36350,.F.); +#41840 = ORIENTED_EDGE('',*,*,#38864,.T.); +#41841 = ORIENTED_EDGE('',*,*,#41842,.F.); +#41842 = EDGE_CURVE('',#36436,#38847,#41843,.T.); +#41843 = LINE('',#41844,#41845); +#41844 = CARTESIAN_POINT('',(-9.,-9.705,0.)); +#41845 = VECTOR('',#41846,1.); +#41846 = DIRECTION('',(0.,0.,1.)); +#41847 = ORIENTED_EDGE('',*,*,#36444,.F.); +#41848 = PLANE('',#41849); +#41849 = AXIS2_PLACEMENT_3D('',#41850,#41851,#41852); +#41850 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#41851 = DIRECTION('',(1.,0.,0.)); +#41852 = DIRECTION('',(0.,-1.,0.)); +#41853 = ADVANCED_FACE('',(#41854),#41881,.F.); +#41854 = FACE_BOUND('',#41855,.F.); +#41855 = EDGE_LOOP('',(#41856,#41864,#41872,#41878,#41879,#41880)); +#41856 = ORIENTED_EDGE('',*,*,#41857,.T.); +#41857 = EDGE_CURVE('',#36470,#41858,#41860,.T.); +#41858 = VERTEX_POINT('',#41859); +#41859 = CARTESIAN_POINT('',(9.000000023842,-9.705,-2.145767343E-06)); +#41860 = LINE('',#41861,#41862); +#41861 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#41862 = VECTOR('',#41863,1.); +#41863 = DIRECTION('',(0.,-1.,0.)); +#41864 = ORIENTED_EDGE('',*,*,#41865,.T.); +#41865 = EDGE_CURVE('',#41858,#41866,#41868,.T.); +#41866 = VERTEX_POINT('',#41867); +#41867 = CARTESIAN_POINT('',(9.000000214576,-9.705,0.799997854233)); +#41868 = LINE('',#41869,#41870); +#41869 = CARTESIAN_POINT('',(9.000000023842,-9.705,-2.14576734264E-06)); +#41870 = VECTOR('',#41871,1.); +#41871 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41872 = ORIENTED_EDGE('',*,*,#41873,.F.); +#41873 = EDGE_CURVE('',#36404,#41866,#41874,.T.); +#41874 = LINE('',#41875,#41876); +#41875 = CARTESIAN_POINT('',(9.000000214576,-9.53,0.799997854233)); +#41876 = VECTOR('',#41877,1.); +#41877 = DIRECTION('',(0.,-1.,0.)); +#41878 = ORIENTED_EDGE('',*,*,#36411,.T.); +#41879 = ORIENTED_EDGE('',*,*,#36419,.T.); +#41880 = ORIENTED_EDGE('',*,*,#36479,.F.); +#41881 = PLANE('',#41882); +#41882 = AXIS2_PLACEMENT_3D('',#41883,#41884,#41885); +#41883 = CARTESIAN_POINT('',(9.000000023842,-9.53,-2.14576734264E-06)); +#41884 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41885 = DIRECTION('',(0.,1.,0.)); +#41886 = ADVANCED_FACE('',(#41887),#41898,.F.); +#41887 = FACE_BOUND('',#41888,.F.); +#41888 = EDGE_LOOP('',(#41889,#41890,#41891,#41892)); +#41889 = ORIENTED_EDGE('',*,*,#36433,.T.); +#41890 = ORIENTED_EDGE('',*,*,#41842,.T.); +#41891 = ORIENTED_EDGE('',*,*,#38844,.F.); +#41892 = ORIENTED_EDGE('',*,*,#41893,.F.); +#41893 = EDGE_CURVE('',#36434,#38845,#41894,.T.); +#41894 = LINE('',#41895,#41896); +#41895 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#41896 = VECTOR('',#41897,1.); +#41897 = DIRECTION('',(0.,0.,1.)); +#41898 = CYLINDRICAL_SURFACE('',#41899,0.275); +#41899 = AXIS2_PLACEMENT_3D('',#41900,#41901,#41902); +#41900 = CARTESIAN_POINT('',(-9.,-9.98,0.)); +#41901 = DIRECTION('',(-0.,-0.,-1.)); +#41902 = DIRECTION('',(1.,0.,0.)); +#41903 = ADVANCED_FACE('',(#41904),#41911,.F.); +#41904 = FACE_BOUND('',#41905,.F.); +#41905 = EDGE_LOOP('',(#41906,#41907,#41908,#41909,#41910)); +#41906 = ORIENTED_EDGE('',*,*,#41893,.T.); +#41907 = ORIENTED_EDGE('',*,*,#38855,.T.); +#41908 = ORIENTED_EDGE('',*,*,#36566,.T.); +#41909 = ORIENTED_EDGE('',*,*,#36574,.T.); +#41910 = ORIENTED_EDGE('',*,*,#36455,.F.); +#41911 = PLANE('',#41912); +#41912 = AXIS2_PLACEMENT_3D('',#41913,#41914,#41915); +#41913 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#41914 = DIRECTION('',(1.,0.,0.)); +#41915 = DIRECTION('',(0.,-1.,0.)); +#41916 = ADVANCED_FACE('',(#41917),#41938,.F.); +#41917 = FACE_BOUND('',#41918,.F.); +#41918 = EDGE_LOOP('',(#41919,#41928,#41929,#41930,#41931,#41932)); +#41919 = ORIENTED_EDGE('',*,*,#41920,.T.); +#41920 = EDGE_CURVE('',#41921,#41858,#41923,.T.); +#41921 = VERTEX_POINT('',#41922); +#41922 = CARTESIAN_POINT('',(9.000000023842,-10.255,-2.145767343E-06)); +#41923 = CIRCLE('',#41924,0.275); +#41924 = AXIS2_PLACEMENT_3D('',#41925,#41926,#41927); +#41925 = CARTESIAN_POINT('',(9.000000023842,-9.98,-2.14576734264E-06)); +#41926 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#41927 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41928 = ORIENTED_EDGE('',*,*,#41857,.F.); +#41929 = ORIENTED_EDGE('',*,*,#36469,.T.); +#41930 = ORIENTED_EDGE('',*,*,#36501,.T.); +#41931 = ORIENTED_EDGE('',*,*,#36525,.T.); +#41932 = ORIENTED_EDGE('',*,*,#41933,.F.); +#41933 = EDGE_CURVE('',#41921,#36526,#41934,.T.); +#41934 = LINE('',#41935,#41936); +#41935 = CARTESIAN_POINT('',(9.000000023842,-10.255,-2.14576734264E-06) + ); +#41936 = VECTOR('',#41937,1.); +#41937 = DIRECTION('',(0.,-1.,0.)); +#41938 = PLANE('',#41939); +#41939 = AXIS2_PLACEMENT_3D('',#41940,#41941,#41942); +#41940 = CARTESIAN_POINT('',(8.571261919915,-9.98,-2.04354820701E-06)); +#41941 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41942 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#41943 = ADVANCED_FACE('',(#41944),#41964,.F.); +#41944 = FACE_BOUND('',#41945,.F.); +#41945 = EDGE_LOOP('',(#41946,#41947,#41948,#41949,#41950,#41958)); +#41946 = ORIENTED_EDGE('',*,*,#41933,.T.); +#41947 = ORIENTED_EDGE('',*,*,#36536,.T.); +#41948 = ORIENTED_EDGE('',*,*,#36589,.F.); +#41949 = ORIENTED_EDGE('',*,*,#36597,.F.); +#41950 = ORIENTED_EDGE('',*,*,#41951,.F.); +#41951 = EDGE_CURVE('',#41952,#36598,#41954,.T.); +#41952 = VERTEX_POINT('',#41953); +#41953 = CARTESIAN_POINT('',(9.000000214576,-10.255,0.799997854233)); +#41954 = LINE('',#41955,#41956); +#41955 = CARTESIAN_POINT('',(9.000000214576,-10.255,0.799997854233)); +#41956 = VECTOR('',#41957,1.); +#41957 = DIRECTION('',(0.,-1.,0.)); +#41958 = ORIENTED_EDGE('',*,*,#41959,.F.); +#41959 = EDGE_CURVE('',#41921,#41952,#41960,.T.); +#41960 = LINE('',#41961,#41962); +#41961 = CARTESIAN_POINT('',(9.000000023842,-10.255,-2.14576734264E-06) + ); +#41962 = VECTOR('',#41963,1.); +#41963 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#41964 = PLANE('',#41965); +#41965 = AXIS2_PLACEMENT_3D('',#41966,#41967,#41968); +#41966 = CARTESIAN_POINT('',(9.000000023842,-10.255,-2.14576734264E-06) + ); +#41967 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#41968 = DIRECTION('',(0.,1.,0.)); +#41969 = ADVANCED_FACE('',(#41970),#41982,.F.); +#41970 = FACE_BOUND('',#41971,.F.); +#41971 = EDGE_LOOP('',(#41972,#41973,#41974,#41975,#41981)); +#41972 = ORIENTED_EDGE('',*,*,#36551,.F.); +#41973 = ORIENTED_EDGE('',*,*,#36559,.F.); +#41974 = ORIENTED_EDGE('',*,*,#38963,.T.); +#41975 = ORIENTED_EDGE('',*,*,#41976,.F.); +#41976 = EDGE_CURVE('',#36645,#38946,#41977,.T.); +#41977 = LINE('',#41978,#41979); +#41978 = CARTESIAN_POINT('',(-9.,-10.975,0.)); +#41979 = VECTOR('',#41980,1.); +#41980 = DIRECTION('',(0.,0.,1.)); +#41981 = ORIENTED_EDGE('',*,*,#36653,.F.); +#41982 = PLANE('',#41983); +#41983 = AXIS2_PLACEMENT_3D('',#41984,#41985,#41986); +#41984 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#41985 = DIRECTION('',(1.,0.,0.)); +#41986 = DIRECTION('',(0.,-1.,0.)); +#41987 = ADVANCED_FACE('',(#41988),#42015,.F.); +#41988 = FACE_BOUND('',#41989,.F.); +#41989 = EDGE_LOOP('',(#41990,#41998,#42006,#42012,#42013,#42014)); +#41990 = ORIENTED_EDGE('',*,*,#41991,.T.); +#41991 = EDGE_CURVE('',#36679,#41992,#41994,.T.); +#41992 = VERTEX_POINT('',#41993); +#41993 = CARTESIAN_POINT('',(9.000000023842,-10.975,-2.145767343E-06)); +#41994 = LINE('',#41995,#41996); +#41995 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#41996 = VECTOR('',#41997,1.); +#41997 = DIRECTION('',(0.,-1.,0.)); +#41998 = ORIENTED_EDGE('',*,*,#41999,.T.); +#41999 = EDGE_CURVE('',#41992,#42000,#42002,.T.); +#42000 = VERTEX_POINT('',#42001); +#42001 = CARTESIAN_POINT('',(9.000000214576,-10.975,0.799997854233)); +#42002 = LINE('',#42003,#42004); +#42003 = CARTESIAN_POINT('',(9.000000023842,-10.975,-2.14576734264E-06) + ); +#42004 = VECTOR('',#42005,1.); +#42005 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42006 = ORIENTED_EDGE('',*,*,#42007,.F.); +#42007 = EDGE_CURVE('',#36613,#42000,#42008,.T.); +#42008 = LINE('',#42009,#42010); +#42009 = CARTESIAN_POINT('',(9.000000214576,-10.8,0.799997854233)); +#42010 = VECTOR('',#42011,1.); +#42011 = DIRECTION('',(0.,-1.,0.)); +#42012 = ORIENTED_EDGE('',*,*,#36620,.T.); +#42013 = ORIENTED_EDGE('',*,*,#36628,.T.); +#42014 = ORIENTED_EDGE('',*,*,#36688,.F.); +#42015 = PLANE('',#42016); +#42016 = AXIS2_PLACEMENT_3D('',#42017,#42018,#42019); +#42017 = CARTESIAN_POINT('',(9.000000023842,-10.8,-2.14576734264E-06)); +#42018 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42019 = DIRECTION('',(0.,1.,0.)); +#42020 = ADVANCED_FACE('',(#42021),#42032,.F.); +#42021 = FACE_BOUND('',#42022,.F.); +#42022 = EDGE_LOOP('',(#42023,#42024,#42025,#42026)); +#42023 = ORIENTED_EDGE('',*,*,#36642,.T.); +#42024 = ORIENTED_EDGE('',*,*,#41976,.T.); +#42025 = ORIENTED_EDGE('',*,*,#38943,.F.); +#42026 = ORIENTED_EDGE('',*,*,#42027,.F.); +#42027 = EDGE_CURVE('',#36643,#38944,#42028,.T.); +#42028 = LINE('',#42029,#42030); +#42029 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#42030 = VECTOR('',#42031,1.); +#42031 = DIRECTION('',(0.,0.,1.)); +#42032 = CYLINDRICAL_SURFACE('',#42033,0.275); +#42033 = AXIS2_PLACEMENT_3D('',#42034,#42035,#42036); +#42034 = CARTESIAN_POINT('',(-9.,-11.25,0.)); +#42035 = DIRECTION('',(-0.,-0.,-1.)); +#42036 = DIRECTION('',(1.,0.,0.)); +#42037 = ADVANCED_FACE('',(#42038),#42045,.F.); +#42038 = FACE_BOUND('',#42039,.F.); +#42039 = EDGE_LOOP('',(#42040,#42041,#42042,#42043,#42044)); +#42040 = ORIENTED_EDGE('',*,*,#42027,.T.); +#42041 = ORIENTED_EDGE('',*,*,#38954,.T.); +#42042 = ORIENTED_EDGE('',*,*,#36767,.T.); +#42043 = ORIENTED_EDGE('',*,*,#36775,.T.); +#42044 = ORIENTED_EDGE('',*,*,#36664,.F.); +#42045 = PLANE('',#42046); +#42046 = AXIS2_PLACEMENT_3D('',#42047,#42048,#42049); +#42047 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#42048 = DIRECTION('',(1.,0.,0.)); +#42049 = DIRECTION('',(0.,-1.,0.)); +#42050 = ADVANCED_FACE('',(#42051),#42072,.F.); +#42051 = FACE_BOUND('',#42052,.F.); +#42052 = EDGE_LOOP('',(#42053,#42062,#42063,#42064,#42065,#42066)); +#42053 = ORIENTED_EDGE('',*,*,#42054,.T.); +#42054 = EDGE_CURVE('',#42055,#41992,#42057,.T.); +#42055 = VERTEX_POINT('',#42056); +#42056 = CARTESIAN_POINT('',(9.000000023842,-11.525,-2.145767343E-06)); +#42057 = CIRCLE('',#42058,0.275); +#42058 = AXIS2_PLACEMENT_3D('',#42059,#42060,#42061); +#42059 = CARTESIAN_POINT('',(9.000000023842,-11.25,-2.14576734264E-06)); +#42060 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42061 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42062 = ORIENTED_EDGE('',*,*,#41991,.F.); +#42063 = ORIENTED_EDGE('',*,*,#36678,.T.); +#42064 = ORIENTED_EDGE('',*,*,#36710,.T.); +#42065 = ORIENTED_EDGE('',*,*,#36734,.T.); +#42066 = ORIENTED_EDGE('',*,*,#42067,.F.); +#42067 = EDGE_CURVE('',#42055,#36735,#42068,.T.); +#42068 = LINE('',#42069,#42070); +#42069 = CARTESIAN_POINT('',(9.000000023842,-11.525,-2.14576734264E-06) + ); +#42070 = VECTOR('',#42071,1.); +#42071 = DIRECTION('',(0.,-1.,0.)); +#42072 = PLANE('',#42073); +#42073 = AXIS2_PLACEMENT_3D('',#42074,#42075,#42076); +#42074 = CARTESIAN_POINT('',(8.571261919915,-11.25,-2.04354820701E-06)); +#42075 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42076 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42077 = ADVANCED_FACE('',(#42078),#42098,.F.); +#42078 = FACE_BOUND('',#42079,.F.); +#42079 = EDGE_LOOP('',(#42080,#42081,#42082,#42083,#42084,#42092)); +#42080 = ORIENTED_EDGE('',*,*,#42067,.T.); +#42081 = ORIENTED_EDGE('',*,*,#36745,.T.); +#42082 = ORIENTED_EDGE('',*,*,#36790,.F.); +#42083 = ORIENTED_EDGE('',*,*,#36798,.F.); +#42084 = ORIENTED_EDGE('',*,*,#42085,.F.); +#42085 = EDGE_CURVE('',#42086,#36799,#42088,.T.); +#42086 = VERTEX_POINT('',#42087); +#42087 = CARTESIAN_POINT('',(9.000000214576,-11.525,0.799997854233)); +#42088 = LINE('',#42089,#42090); +#42089 = CARTESIAN_POINT('',(9.000000214576,-11.525,0.799997854233)); +#42090 = VECTOR('',#42091,1.); +#42091 = DIRECTION('',(0.,-1.,0.)); +#42092 = ORIENTED_EDGE('',*,*,#42093,.F.); +#42093 = EDGE_CURVE('',#42055,#42086,#42094,.T.); +#42094 = LINE('',#42095,#42096); +#42095 = CARTESIAN_POINT('',(9.000000023842,-11.525,-2.14576734264E-06) + ); +#42096 = VECTOR('',#42097,1.); +#42097 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42098 = PLANE('',#42099); +#42099 = AXIS2_PLACEMENT_3D('',#42100,#42101,#42102); +#42100 = CARTESIAN_POINT('',(9.000000023842,-11.525,-2.14576734264E-06) + ); +#42101 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42102 = DIRECTION('',(0.,1.,0.)); +#42103 = ADVANCED_FACE('',(#42104),#42116,.F.); +#42104 = FACE_BOUND('',#42105,.F.); +#42105 = EDGE_LOOP('',(#42106,#42107,#42108,#42109,#42115)); +#42106 = ORIENTED_EDGE('',*,*,#36828,.F.); +#42107 = ORIENTED_EDGE('',*,*,#36836,.F.); +#42108 = ORIENTED_EDGE('',*,*,#39062,.T.); +#42109 = ORIENTED_EDGE('',*,*,#42110,.F.); +#42110 = EDGE_CURVE('',#36880,#39045,#42111,.T.); +#42111 = LINE('',#42112,#42113); +#42112 = CARTESIAN_POINT('',(-5.99,-12.75,0.)); +#42113 = VECTOR('',#42114,1.); +#42114 = DIRECTION('',(0.,0.,1.)); +#42115 = ORIENTED_EDGE('',*,*,#36888,.F.); +#42116 = PLANE('',#42117); +#42117 = AXIS2_PLACEMENT_3D('',#42118,#42119,#42120); +#42118 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#42119 = DIRECTION('',(0.,1.,0.)); +#42120 = DIRECTION('',(1.,0.,0.)); +#42121 = ADVANCED_FACE('',(#42122),#42134,.F.); +#42122 = FACE_BOUND('',#42123,.F.); +#42123 = EDGE_LOOP('',(#42124,#42130,#42131,#42132,#42133)); +#42124 = ORIENTED_EDGE('',*,*,#42125,.T.); +#42125 = EDGE_CURVE('',#36914,#39077,#42126,.T.); +#42126 = LINE('',#42127,#42128); +#42127 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#42128 = VECTOR('',#42129,1.); +#42129 = DIRECTION('',(0.,0.,1.)); +#42130 = ORIENTED_EDGE('',*,*,#39087,.T.); +#42131 = ORIENTED_EDGE('',*,*,#36855,.T.); +#42132 = ORIENTED_EDGE('',*,*,#36863,.T.); +#42133 = ORIENTED_EDGE('',*,*,#36935,.F.); +#42134 = PLANE('',#42135); +#42135 = AXIS2_PLACEMENT_3D('',#42136,#42137,#42138); +#42136 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#42137 = DIRECTION('',(0.,1.,0.)); +#42138 = DIRECTION('',(1.,0.,0.)); +#42139 = ADVANCED_FACE('',(#42140),#42151,.F.); +#42140 = FACE_BOUND('',#42141,.F.); +#42141 = EDGE_LOOP('',(#42142,#42143,#42144,#42145)); +#42142 = ORIENTED_EDGE('',*,*,#36877,.T.); +#42143 = ORIENTED_EDGE('',*,*,#42110,.T.); +#42144 = ORIENTED_EDGE('',*,*,#39042,.F.); +#42145 = ORIENTED_EDGE('',*,*,#42146,.F.); +#42146 = EDGE_CURVE('',#36878,#39043,#42147,.T.); +#42147 = LINE('',#42148,#42149); +#42148 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#42149 = VECTOR('',#42150,1.); +#42150 = DIRECTION('',(0.,0.,1.)); +#42151 = CYLINDRICAL_SURFACE('',#42152,0.275); +#42152 = AXIS2_PLACEMENT_3D('',#42153,#42154,#42155); +#42153 = CARTESIAN_POINT('',(-5.715,-12.75,0.)); +#42154 = DIRECTION('',(0.,-0.,-1.)); +#42155 = DIRECTION('',(0.,1.,0.)); +#42156 = ADVANCED_FACE('',(#42157),#42164,.F.); +#42157 = FACE_BOUND('',#42158,.F.); +#42158 = EDGE_LOOP('',(#42159,#42160,#42161,#42162,#42163)); +#42159 = ORIENTED_EDGE('',*,*,#42146,.T.); +#42160 = ORIENTED_EDGE('',*,*,#39053,.T.); +#42161 = ORIENTED_EDGE('',*,*,#36965,.T.); +#42162 = ORIENTED_EDGE('',*,*,#36973,.T.); +#42163 = ORIENTED_EDGE('',*,*,#36899,.F.); +#42164 = PLANE('',#42165); +#42165 = AXIS2_PLACEMENT_3D('',#42166,#42167,#42168); +#42166 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#42167 = DIRECTION('',(0.,1.,0.)); +#42168 = DIRECTION('',(1.,0.,0.)); +#42169 = ADVANCED_FACE('',(#42170),#42181,.F.); +#42170 = FACE_BOUND('',#42171,.F.); +#42171 = EDGE_LOOP('',(#42172,#42173,#42179,#42180)); +#42172 = ORIENTED_EDGE('',*,*,#36913,.T.); +#42173 = ORIENTED_EDGE('',*,*,#42174,.T.); +#42174 = EDGE_CURVE('',#36916,#39079,#42175,.T.); +#42175 = LINE('',#42176,#42177); +#42176 = CARTESIAN_POINT('',(5.44,-12.75,0.)); +#42177 = VECTOR('',#42178,1.); +#42178 = DIRECTION('',(0.,0.,1.)); +#42179 = ORIENTED_EDGE('',*,*,#39076,.F.); +#42180 = ORIENTED_EDGE('',*,*,#42125,.F.); +#42181 = CYLINDRICAL_SURFACE('',#42182,0.275); +#42182 = AXIS2_PLACEMENT_3D('',#42183,#42184,#42185); +#42183 = CARTESIAN_POINT('',(5.715,-12.75,0.)); +#42184 = DIRECTION('',(0.,-0.,-1.)); +#42185 = DIRECTION('',(0.,1.,0.)); +#42186 = ADVANCED_FACE('',(#42187),#42194,.F.); +#42187 = FACE_BOUND('',#42188,.F.); +#42188 = EDGE_LOOP('',(#42189,#42190,#42191,#42192,#42193)); +#42189 = ORIENTED_EDGE('',*,*,#36988,.F.); +#42190 = ORIENTED_EDGE('',*,*,#36996,.F.); +#42191 = ORIENTED_EDGE('',*,*,#39096,.T.); +#42192 = ORIENTED_EDGE('',*,*,#42174,.F.); +#42193 = ORIENTED_EDGE('',*,*,#36924,.F.); +#42194 = PLANE('',#42195); +#42195 = AXIS2_PLACEMENT_3D('',#42196,#42197,#42198); +#42196 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#42197 = DIRECTION('',(0.,1.,0.)); +#42198 = DIRECTION('',(1.,0.,0.)); +#42199 = ADVANCED_FACE('',(#42200),#42212,.F.); +#42200 = FACE_BOUND('',#42201,.F.); +#42201 = EDGE_LOOP('',(#42202,#42203,#42204,#42205,#42211)); +#42202 = ORIENTED_EDGE('',*,*,#36950,.F.); +#42203 = ORIENTED_EDGE('',*,*,#36958,.F.); +#42204 = ORIENTED_EDGE('',*,*,#39130,.T.); +#42205 = ORIENTED_EDGE('',*,*,#42206,.F.); +#42206 = EDGE_CURVE('',#37028,#39113,#42207,.T.); +#42207 = LINE('',#42208,#42209); +#42208 = CARTESIAN_POINT('',(-4.72,-12.75,0.)); +#42209 = VECTOR('',#42210,1.); +#42210 = DIRECTION('',(0.,0.,1.)); +#42211 = ORIENTED_EDGE('',*,*,#37036,.F.); +#42212 = PLANE('',#42213); +#42213 = AXIS2_PLACEMENT_3D('',#42214,#42215,#42216); +#42214 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#42215 = DIRECTION('',(0.,1.,0.)); +#42216 = DIRECTION('',(1.,0.,0.)); +#42217 = ADVANCED_FACE('',(#42218),#42230,.F.); +#42218 = FACE_BOUND('',#42219,.F.); +#42219 = EDGE_LOOP('',(#42220,#42226,#42227,#42228,#42229)); +#42220 = ORIENTED_EDGE('',*,*,#42221,.T.); +#42221 = EDGE_CURVE('',#37062,#39145,#42222,.T.); +#42222 = LINE('',#42223,#42224); +#42223 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#42224 = VECTOR('',#42225,1.); +#42225 = DIRECTION('',(0.,0.,1.)); +#42226 = ORIENTED_EDGE('',*,*,#39155,.T.); +#42227 = ORIENTED_EDGE('',*,*,#37003,.T.); +#42228 = ORIENTED_EDGE('',*,*,#37011,.T.); +#42229 = ORIENTED_EDGE('',*,*,#37083,.F.); +#42230 = PLANE('',#42231); +#42231 = AXIS2_PLACEMENT_3D('',#42232,#42233,#42234); +#42232 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#42233 = DIRECTION('',(0.,1.,0.)); +#42234 = DIRECTION('',(1.,0.,0.)); +#42235 = ADVANCED_FACE('',(#42236),#42247,.F.); +#42236 = FACE_BOUND('',#42237,.F.); +#42237 = EDGE_LOOP('',(#42238,#42239,#42240,#42241)); +#42238 = ORIENTED_EDGE('',*,*,#37025,.T.); +#42239 = ORIENTED_EDGE('',*,*,#42206,.T.); +#42240 = ORIENTED_EDGE('',*,*,#39110,.F.); +#42241 = ORIENTED_EDGE('',*,*,#42242,.F.); +#42242 = EDGE_CURVE('',#37026,#39111,#42243,.T.); +#42243 = LINE('',#42244,#42245); +#42244 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#42245 = VECTOR('',#42246,1.); +#42246 = DIRECTION('',(0.,0.,1.)); +#42247 = CYLINDRICAL_SURFACE('',#42248,0.275); +#42248 = AXIS2_PLACEMENT_3D('',#42249,#42250,#42251); +#42249 = CARTESIAN_POINT('',(-4.445,-12.75,0.)); +#42250 = DIRECTION('',(0.,-0.,-1.)); +#42251 = DIRECTION('',(0.,1.,0.)); +#42252 = ADVANCED_FACE('',(#42253),#42260,.F.); +#42253 = FACE_BOUND('',#42254,.F.); +#42254 = EDGE_LOOP('',(#42255,#42256,#42257,#42258,#42259)); +#42255 = ORIENTED_EDGE('',*,*,#42242,.T.); +#42256 = ORIENTED_EDGE('',*,*,#39121,.T.); +#42257 = ORIENTED_EDGE('',*,*,#37113,.T.); +#42258 = ORIENTED_EDGE('',*,*,#37121,.T.); +#42259 = ORIENTED_EDGE('',*,*,#37047,.F.); +#42260 = PLANE('',#42261); +#42261 = AXIS2_PLACEMENT_3D('',#42262,#42263,#42264); +#42262 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#42263 = DIRECTION('',(0.,1.,0.)); +#42264 = DIRECTION('',(1.,0.,0.)); +#42265 = ADVANCED_FACE('',(#42266),#42277,.F.); +#42266 = FACE_BOUND('',#42267,.F.); +#42267 = EDGE_LOOP('',(#42268,#42269,#42275,#42276)); +#42268 = ORIENTED_EDGE('',*,*,#37061,.T.); +#42269 = ORIENTED_EDGE('',*,*,#42270,.T.); +#42270 = EDGE_CURVE('',#37064,#39147,#42271,.T.); +#42271 = LINE('',#42272,#42273); +#42272 = CARTESIAN_POINT('',(4.17,-12.75,0.)); +#42273 = VECTOR('',#42274,1.); +#42274 = DIRECTION('',(0.,0.,1.)); +#42275 = ORIENTED_EDGE('',*,*,#39144,.F.); +#42276 = ORIENTED_EDGE('',*,*,#42221,.F.); +#42277 = CYLINDRICAL_SURFACE('',#42278,0.275); +#42278 = AXIS2_PLACEMENT_3D('',#42279,#42280,#42281); +#42279 = CARTESIAN_POINT('',(4.445,-12.75,0.)); +#42280 = DIRECTION('',(0.,-0.,-1.)); +#42281 = DIRECTION('',(0.,1.,0.)); +#42282 = ADVANCED_FACE('',(#42283),#42290,.F.); +#42283 = FACE_BOUND('',#42284,.F.); +#42284 = EDGE_LOOP('',(#42285,#42286,#42287,#42288,#42289)); +#42285 = ORIENTED_EDGE('',*,*,#37136,.F.); +#42286 = ORIENTED_EDGE('',*,*,#37144,.F.); +#42287 = ORIENTED_EDGE('',*,*,#39164,.T.); +#42288 = ORIENTED_EDGE('',*,*,#42270,.F.); +#42289 = ORIENTED_EDGE('',*,*,#37072,.F.); +#42290 = PLANE('',#42291); +#42291 = AXIS2_PLACEMENT_3D('',#42292,#42293,#42294); +#42292 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#42293 = DIRECTION('',(0.,1.,0.)); +#42294 = DIRECTION('',(1.,0.,0.)); +#42295 = ADVANCED_FACE('',(#42296),#42308,.F.); +#42296 = FACE_BOUND('',#42297,.F.); +#42297 = EDGE_LOOP('',(#42298,#42299,#42300,#42301,#42307)); +#42298 = ORIENTED_EDGE('',*,*,#37098,.F.); +#42299 = ORIENTED_EDGE('',*,*,#37106,.F.); +#42300 = ORIENTED_EDGE('',*,*,#39198,.T.); +#42301 = ORIENTED_EDGE('',*,*,#42302,.F.); +#42302 = EDGE_CURVE('',#37176,#39181,#42303,.T.); +#42303 = LINE('',#42304,#42305); +#42304 = CARTESIAN_POINT('',(-3.45,-12.75,0.)); +#42305 = VECTOR('',#42306,1.); +#42306 = DIRECTION('',(0.,0.,1.)); +#42307 = ORIENTED_EDGE('',*,*,#37184,.F.); +#42308 = PLANE('',#42309); +#42309 = AXIS2_PLACEMENT_3D('',#42310,#42311,#42312); +#42310 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#42311 = DIRECTION('',(0.,1.,0.)); +#42312 = DIRECTION('',(1.,0.,0.)); +#42313 = ADVANCED_FACE('',(#42314),#42326,.F.); +#42314 = FACE_BOUND('',#42315,.F.); +#42315 = EDGE_LOOP('',(#42316,#42322,#42323,#42324,#42325)); +#42316 = ORIENTED_EDGE('',*,*,#42317,.T.); +#42317 = EDGE_CURVE('',#37210,#39213,#42318,.T.); +#42318 = LINE('',#42319,#42320); +#42319 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#42320 = VECTOR('',#42321,1.); +#42321 = DIRECTION('',(0.,0.,1.)); +#42322 = ORIENTED_EDGE('',*,*,#39223,.T.); +#42323 = ORIENTED_EDGE('',*,*,#37151,.T.); +#42324 = ORIENTED_EDGE('',*,*,#37159,.T.); +#42325 = ORIENTED_EDGE('',*,*,#37231,.F.); +#42326 = PLANE('',#42327); +#42327 = AXIS2_PLACEMENT_3D('',#42328,#42329,#42330); +#42328 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#42329 = DIRECTION('',(0.,1.,0.)); +#42330 = DIRECTION('',(1.,0.,0.)); +#42331 = ADVANCED_FACE('',(#42332),#42343,.F.); +#42332 = FACE_BOUND('',#42333,.F.); +#42333 = EDGE_LOOP('',(#42334,#42335,#42336,#42337)); +#42334 = ORIENTED_EDGE('',*,*,#37173,.T.); +#42335 = ORIENTED_EDGE('',*,*,#42302,.T.); +#42336 = ORIENTED_EDGE('',*,*,#39178,.F.); +#42337 = ORIENTED_EDGE('',*,*,#42338,.F.); +#42338 = EDGE_CURVE('',#37174,#39179,#42339,.T.); +#42339 = LINE('',#42340,#42341); +#42340 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#42341 = VECTOR('',#42342,1.); +#42342 = DIRECTION('',(0.,0.,1.)); +#42343 = CYLINDRICAL_SURFACE('',#42344,0.275); +#42344 = AXIS2_PLACEMENT_3D('',#42345,#42346,#42347); +#42345 = CARTESIAN_POINT('',(-3.175,-12.75,0.)); +#42346 = DIRECTION('',(0.,-0.,-1.)); +#42347 = DIRECTION('',(0.,1.,0.)); +#42348 = ADVANCED_FACE('',(#42349),#42356,.F.); +#42349 = FACE_BOUND('',#42350,.F.); +#42350 = EDGE_LOOP('',(#42351,#42352,#42353,#42354,#42355)); +#42351 = ORIENTED_EDGE('',*,*,#42338,.T.); +#42352 = ORIENTED_EDGE('',*,*,#39189,.T.); +#42353 = ORIENTED_EDGE('',*,*,#37261,.T.); +#42354 = ORIENTED_EDGE('',*,*,#37269,.T.); +#42355 = ORIENTED_EDGE('',*,*,#37195,.F.); +#42356 = PLANE('',#42357); +#42357 = AXIS2_PLACEMENT_3D('',#42358,#42359,#42360); +#42358 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#42359 = DIRECTION('',(0.,1.,0.)); +#42360 = DIRECTION('',(1.,0.,0.)); +#42361 = ADVANCED_FACE('',(#42362),#42373,.F.); +#42362 = FACE_BOUND('',#42363,.F.); +#42363 = EDGE_LOOP('',(#42364,#42365,#42371,#42372)); +#42364 = ORIENTED_EDGE('',*,*,#37209,.T.); +#42365 = ORIENTED_EDGE('',*,*,#42366,.T.); +#42366 = EDGE_CURVE('',#37212,#39215,#42367,.T.); +#42367 = LINE('',#42368,#42369); +#42368 = CARTESIAN_POINT('',(2.9,-12.75,0.)); +#42369 = VECTOR('',#42370,1.); +#42370 = DIRECTION('',(0.,0.,1.)); +#42371 = ORIENTED_EDGE('',*,*,#39212,.F.); +#42372 = ORIENTED_EDGE('',*,*,#42317,.F.); +#42373 = CYLINDRICAL_SURFACE('',#42374,0.275); +#42374 = AXIS2_PLACEMENT_3D('',#42375,#42376,#42377); +#42375 = CARTESIAN_POINT('',(3.175,-12.75,0.)); +#42376 = DIRECTION('',(0.,-0.,-1.)); +#42377 = DIRECTION('',(0.,1.,0.)); +#42378 = ADVANCED_FACE('',(#42379),#42386,.F.); +#42379 = FACE_BOUND('',#42380,.F.); +#42380 = EDGE_LOOP('',(#42381,#42382,#42383,#42384,#42385)); +#42381 = ORIENTED_EDGE('',*,*,#37284,.F.); +#42382 = ORIENTED_EDGE('',*,*,#37292,.F.); +#42383 = ORIENTED_EDGE('',*,*,#39232,.T.); +#42384 = ORIENTED_EDGE('',*,*,#42366,.F.); +#42385 = ORIENTED_EDGE('',*,*,#37220,.F.); +#42386 = PLANE('',#42387); +#42387 = AXIS2_PLACEMENT_3D('',#42388,#42389,#42390); +#42388 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#42389 = DIRECTION('',(0.,1.,0.)); +#42390 = DIRECTION('',(1.,0.,0.)); +#42391 = ADVANCED_FACE('',(#42392),#42404,.F.); +#42392 = FACE_BOUND('',#42393,.F.); +#42393 = EDGE_LOOP('',(#42394,#42395,#42396,#42397,#42403)); +#42394 = ORIENTED_EDGE('',*,*,#37246,.F.); +#42395 = ORIENTED_EDGE('',*,*,#37254,.F.); +#42396 = ORIENTED_EDGE('',*,*,#39266,.T.); +#42397 = ORIENTED_EDGE('',*,*,#42398,.F.); +#42398 = EDGE_CURVE('',#37324,#39249,#42399,.T.); +#42399 = LINE('',#42400,#42401); +#42400 = CARTESIAN_POINT('',(-2.18,-12.75,0.)); +#42401 = VECTOR('',#42402,1.); +#42402 = DIRECTION('',(0.,0.,1.)); +#42403 = ORIENTED_EDGE('',*,*,#37332,.F.); +#42404 = PLANE('',#42405); +#42405 = AXIS2_PLACEMENT_3D('',#42406,#42407,#42408); +#42406 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#42407 = DIRECTION('',(0.,1.,0.)); +#42408 = DIRECTION('',(1.,0.,0.)); +#42409 = ADVANCED_FACE('',(#42410),#42422,.F.); +#42410 = FACE_BOUND('',#42411,.F.); +#42411 = EDGE_LOOP('',(#42412,#42418,#42419,#42420,#42421)); +#42412 = ORIENTED_EDGE('',*,*,#42413,.T.); +#42413 = EDGE_CURVE('',#37358,#39281,#42414,.T.); +#42414 = LINE('',#42415,#42416); +#42415 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#42416 = VECTOR('',#42417,1.); +#42417 = DIRECTION('',(0.,0.,1.)); +#42418 = ORIENTED_EDGE('',*,*,#39291,.T.); +#42419 = ORIENTED_EDGE('',*,*,#37299,.T.); +#42420 = ORIENTED_EDGE('',*,*,#37307,.T.); +#42421 = ORIENTED_EDGE('',*,*,#37379,.F.); +#42422 = PLANE('',#42423); +#42423 = AXIS2_PLACEMENT_3D('',#42424,#42425,#42426); +#42424 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#42425 = DIRECTION('',(0.,1.,0.)); +#42426 = DIRECTION('',(1.,0.,0.)); +#42427 = ADVANCED_FACE('',(#42428),#42439,.F.); +#42428 = FACE_BOUND('',#42429,.F.); +#42429 = EDGE_LOOP('',(#42430,#42431,#42432,#42433)); +#42430 = ORIENTED_EDGE('',*,*,#37321,.T.); +#42431 = ORIENTED_EDGE('',*,*,#42398,.T.); +#42432 = ORIENTED_EDGE('',*,*,#39246,.F.); +#42433 = ORIENTED_EDGE('',*,*,#42434,.F.); +#42434 = EDGE_CURVE('',#37322,#39247,#42435,.T.); +#42435 = LINE('',#42436,#42437); +#42436 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#42437 = VECTOR('',#42438,1.); +#42438 = DIRECTION('',(0.,0.,1.)); +#42439 = CYLINDRICAL_SURFACE('',#42440,0.275); +#42440 = AXIS2_PLACEMENT_3D('',#42441,#42442,#42443); +#42441 = CARTESIAN_POINT('',(-1.905,-12.75,0.)); +#42442 = DIRECTION('',(0.,-0.,-1.)); +#42443 = DIRECTION('',(0.,1.,0.)); +#42444 = ADVANCED_FACE('',(#42445),#42452,.F.); +#42445 = FACE_BOUND('',#42446,.F.); +#42446 = EDGE_LOOP('',(#42447,#42448,#42449,#42450,#42451)); +#42447 = ORIENTED_EDGE('',*,*,#42434,.T.); +#42448 = ORIENTED_EDGE('',*,*,#39257,.T.); +#42449 = ORIENTED_EDGE('',*,*,#37409,.T.); +#42450 = ORIENTED_EDGE('',*,*,#37417,.T.); +#42451 = ORIENTED_EDGE('',*,*,#37343,.F.); +#42452 = PLANE('',#42453); +#42453 = AXIS2_PLACEMENT_3D('',#42454,#42455,#42456); +#42454 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#42455 = DIRECTION('',(0.,1.,0.)); +#42456 = DIRECTION('',(1.,0.,0.)); +#42457 = ADVANCED_FACE('',(#42458),#42469,.F.); +#42458 = FACE_BOUND('',#42459,.F.); +#42459 = EDGE_LOOP('',(#42460,#42461,#42467,#42468)); +#42460 = ORIENTED_EDGE('',*,*,#37357,.T.); +#42461 = ORIENTED_EDGE('',*,*,#42462,.T.); +#42462 = EDGE_CURVE('',#37360,#39283,#42463,.T.); +#42463 = LINE('',#42464,#42465); +#42464 = CARTESIAN_POINT('',(1.63,-12.75,0.)); +#42465 = VECTOR('',#42466,1.); +#42466 = DIRECTION('',(0.,0.,1.)); +#42467 = ORIENTED_EDGE('',*,*,#39280,.F.); +#42468 = ORIENTED_EDGE('',*,*,#42413,.F.); +#42469 = CYLINDRICAL_SURFACE('',#42470,0.275); +#42470 = AXIS2_PLACEMENT_3D('',#42471,#42472,#42473); +#42471 = CARTESIAN_POINT('',(1.905,-12.75,0.)); +#42472 = DIRECTION('',(0.,-0.,-1.)); +#42473 = DIRECTION('',(0.,1.,0.)); +#42474 = ADVANCED_FACE('',(#42475),#42482,.F.); +#42475 = FACE_BOUND('',#42476,.F.); +#42476 = EDGE_LOOP('',(#42477,#42478,#42479,#42480,#42481)); +#42477 = ORIENTED_EDGE('',*,*,#37432,.F.); +#42478 = ORIENTED_EDGE('',*,*,#37440,.F.); +#42479 = ORIENTED_EDGE('',*,*,#39300,.T.); +#42480 = ORIENTED_EDGE('',*,*,#42462,.F.); +#42481 = ORIENTED_EDGE('',*,*,#37368,.F.); +#42482 = PLANE('',#42483); +#42483 = AXIS2_PLACEMENT_3D('',#42484,#42485,#42486); +#42484 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#42485 = DIRECTION('',(0.,1.,0.)); +#42486 = DIRECTION('',(1.,0.,0.)); +#42487 = ADVANCED_FACE('',(#42488),#42500,.F.); +#42488 = FACE_BOUND('',#42489,.F.); +#42489 = EDGE_LOOP('',(#42490,#42491,#42492,#42493,#42499)); +#42490 = ORIENTED_EDGE('',*,*,#37394,.F.); +#42491 = ORIENTED_EDGE('',*,*,#37402,.F.); +#42492 = ORIENTED_EDGE('',*,*,#39334,.T.); +#42493 = ORIENTED_EDGE('',*,*,#42494,.F.); +#42494 = EDGE_CURVE('',#37472,#39317,#42495,.T.); +#42495 = LINE('',#42496,#42497); +#42496 = CARTESIAN_POINT('',(-0.91,-12.75,0.)); +#42497 = VECTOR('',#42498,1.); +#42498 = DIRECTION('',(0.,0.,1.)); +#42499 = ORIENTED_EDGE('',*,*,#37480,.F.); +#42500 = PLANE('',#42501); +#42501 = AXIS2_PLACEMENT_3D('',#42502,#42503,#42504); +#42502 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#42503 = DIRECTION('',(0.,1.,0.)); +#42504 = DIRECTION('',(1.,0.,0.)); +#42505 = ADVANCED_FACE('',(#42506),#42518,.F.); +#42506 = FACE_BOUND('',#42507,.F.); +#42507 = EDGE_LOOP('',(#42508,#42514,#42515,#42516,#42517)); +#42508 = ORIENTED_EDGE('',*,*,#42509,.T.); +#42509 = EDGE_CURVE('',#37506,#39349,#42510,.T.); +#42510 = LINE('',#42511,#42512); +#42511 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#42512 = VECTOR('',#42513,1.); +#42513 = DIRECTION('',(0.,0.,1.)); +#42514 = ORIENTED_EDGE('',*,*,#39359,.T.); +#42515 = ORIENTED_EDGE('',*,*,#37447,.T.); +#42516 = ORIENTED_EDGE('',*,*,#37455,.T.); +#42517 = ORIENTED_EDGE('',*,*,#37527,.F.); +#42518 = PLANE('',#42519); +#42519 = AXIS2_PLACEMENT_3D('',#42520,#42521,#42522); +#42520 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#42521 = DIRECTION('',(0.,1.,0.)); +#42522 = DIRECTION('',(1.,0.,0.)); +#42523 = ADVANCED_FACE('',(#42524),#42535,.F.); +#42524 = FACE_BOUND('',#42525,.F.); +#42525 = EDGE_LOOP('',(#42526,#42527,#42528,#42529)); +#42526 = ORIENTED_EDGE('',*,*,#37469,.T.); +#42527 = ORIENTED_EDGE('',*,*,#42494,.T.); +#42528 = ORIENTED_EDGE('',*,*,#39314,.F.); +#42529 = ORIENTED_EDGE('',*,*,#42530,.F.); +#42530 = EDGE_CURVE('',#37470,#39315,#42531,.T.); +#42531 = LINE('',#42532,#42533); +#42532 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#42533 = VECTOR('',#42534,1.); +#42534 = DIRECTION('',(0.,0.,1.)); +#42535 = CYLINDRICAL_SURFACE('',#42536,0.275); +#42536 = AXIS2_PLACEMENT_3D('',#42537,#42538,#42539); +#42537 = CARTESIAN_POINT('',(-0.635,-12.75,0.)); +#42538 = DIRECTION('',(0.,-0.,-1.)); +#42539 = DIRECTION('',(0.,1.,0.)); +#42540 = ADVANCED_FACE('',(#42541),#42548,.F.); +#42541 = FACE_BOUND('',#42542,.F.); +#42542 = EDGE_LOOP('',(#42543,#42544,#42545,#42546,#42547)); +#42543 = ORIENTED_EDGE('',*,*,#42530,.T.); +#42544 = ORIENTED_EDGE('',*,*,#39325,.T.); +#42545 = ORIENTED_EDGE('',*,*,#37557,.T.); +#42546 = ORIENTED_EDGE('',*,*,#37565,.T.); +#42547 = ORIENTED_EDGE('',*,*,#37491,.F.); +#42548 = PLANE('',#42549); +#42549 = AXIS2_PLACEMENT_3D('',#42550,#42551,#42552); +#42550 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#42551 = DIRECTION('',(0.,1.,0.)); +#42552 = DIRECTION('',(1.,0.,0.)); +#42553 = ADVANCED_FACE('',(#42554),#42565,.F.); +#42554 = FACE_BOUND('',#42555,.F.); +#42555 = EDGE_LOOP('',(#42556,#42557,#42563,#42564)); +#42556 = ORIENTED_EDGE('',*,*,#37505,.T.); +#42557 = ORIENTED_EDGE('',*,*,#42558,.T.); +#42558 = EDGE_CURVE('',#37508,#39351,#42559,.T.); +#42559 = LINE('',#42560,#42561); +#42560 = CARTESIAN_POINT('',(0.36,-12.75,0.)); +#42561 = VECTOR('',#42562,1.); +#42562 = DIRECTION('',(0.,0.,1.)); +#42563 = ORIENTED_EDGE('',*,*,#39348,.F.); +#42564 = ORIENTED_EDGE('',*,*,#42509,.F.); +#42565 = CYLINDRICAL_SURFACE('',#42566,0.275); +#42566 = AXIS2_PLACEMENT_3D('',#42567,#42568,#42569); +#42567 = CARTESIAN_POINT('',(0.635,-12.75,0.)); +#42568 = DIRECTION('',(0.,-0.,-1.)); +#42569 = DIRECTION('',(0.,1.,0.)); +#42570 = ADVANCED_FACE('',(#42571),#42578,.F.); +#42571 = FACE_BOUND('',#42572,.F.); +#42572 = EDGE_LOOP('',(#42573,#42574,#42575,#42576,#42577)); +#42573 = ORIENTED_EDGE('',*,*,#37542,.F.); +#42574 = ORIENTED_EDGE('',*,*,#37550,.F.); +#42575 = ORIENTED_EDGE('',*,*,#39368,.T.); +#42576 = ORIENTED_EDGE('',*,*,#42558,.F.); +#42577 = ORIENTED_EDGE('',*,*,#37516,.F.); +#42578 = PLANE('',#42579); +#42579 = AXIS2_PLACEMENT_3D('',#42580,#42581,#42582); +#42580 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#42581 = DIRECTION('',(0.,1.,0.)); +#42582 = DIRECTION('',(1.,0.,0.)); +#42583 = ADVANCED_FACE('',(#42584),#42598,.T.); +#42584 = FACE_BOUND('',#42585,.F.); +#42585 = EDGE_LOOP('',(#42586,#42593,#42594,#42595,#42596,#42597)); +#42586 = ORIENTED_EDGE('',*,*,#42587,.F.); +#42587 = EDGE_CURVE('',#40478,#40392,#42588,.T.); +#42588 = CIRCLE('',#42589,0.275); +#42589 = AXIS2_PLACEMENT_3D('',#42590,#42591,#42592); +#42590 = CARTESIAN_POINT('',(9.000000214576,3.99,0.799997854233)); +#42591 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42592 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42593 = ORIENTED_EDGE('',*,*,#40477,.T.); +#42594 = ORIENTED_EDGE('',*,*,#37839,.F.); +#42595 = ORIENTED_EDGE('',*,*,#37815,.F.); +#42596 = ORIENTED_EDGE('',*,*,#37791,.F.); +#42597 = ORIENTED_EDGE('',*,*,#40399,.T.); +#42598 = PLANE('',#42599); +#42599 = AXIS2_PLACEMENT_3D('',#42600,#42601,#42602); +#42600 = CARTESIAN_POINT('',(8.57126211065,3.99,0.799997956452)); +#42601 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42602 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42603 = ADVANCED_FACE('',(#42604),#42618,.T.); +#42604 = FACE_BOUND('',#42605,.F.); +#42605 = EDGE_LOOP('',(#42606,#42613,#42614,#42615,#42616,#42617)); +#42606 = ORIENTED_EDGE('',*,*,#42607,.F.); +#42607 = EDGE_CURVE('',#40612,#40526,#42608,.T.); +#42608 = CIRCLE('',#42609,0.275); +#42609 = AXIS2_PLACEMENT_3D('',#42610,#42611,#42612); +#42610 = CARTESIAN_POINT('',(9.000000214576,2.72,0.799997854233)); +#42611 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42612 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42613 = ORIENTED_EDGE('',*,*,#40611,.T.); +#42614 = ORIENTED_EDGE('',*,*,#37938,.F.); +#42615 = ORIENTED_EDGE('',*,*,#37914,.F.); +#42616 = ORIENTED_EDGE('',*,*,#37890,.F.); +#42617 = ORIENTED_EDGE('',*,*,#40533,.T.); +#42618 = PLANE('',#42619); +#42619 = AXIS2_PLACEMENT_3D('',#42620,#42621,#42622); +#42620 = CARTESIAN_POINT('',(8.57126211065,2.72,0.799997956452)); +#42621 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42622 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42623 = ADVANCED_FACE('',(#42624),#42638,.T.); +#42624 = FACE_BOUND('',#42625,.F.); +#42625 = EDGE_LOOP('',(#42626,#42633,#42634,#42635,#42636,#42637)); +#42626 = ORIENTED_EDGE('',*,*,#42627,.F.); +#42627 = EDGE_CURVE('',#40746,#40660,#42628,.T.); +#42628 = CIRCLE('',#42629,0.275); +#42629 = AXIS2_PLACEMENT_3D('',#42630,#42631,#42632); +#42630 = CARTESIAN_POINT('',(9.000000214576,1.45,0.799997854233)); +#42631 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42632 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42633 = ORIENTED_EDGE('',*,*,#40745,.T.); +#42634 = ORIENTED_EDGE('',*,*,#38037,.F.); +#42635 = ORIENTED_EDGE('',*,*,#38013,.F.); +#42636 = ORIENTED_EDGE('',*,*,#37989,.F.); +#42637 = ORIENTED_EDGE('',*,*,#40667,.T.); +#42638 = PLANE('',#42639); +#42639 = AXIS2_PLACEMENT_3D('',#42640,#42641,#42642); +#42640 = CARTESIAN_POINT('',(8.57126211065,1.45,0.799997956452)); +#42641 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42642 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42643 = ADVANCED_FACE('',(#42644),#42658,.T.); +#42644 = FACE_BOUND('',#42645,.F.); +#42645 = EDGE_LOOP('',(#42646,#42653,#42654,#42655,#42656,#42657)); +#42646 = ORIENTED_EDGE('',*,*,#42647,.F.); +#42647 = EDGE_CURVE('',#40880,#40794,#42648,.T.); +#42648 = CIRCLE('',#42649,0.275); +#42649 = AXIS2_PLACEMENT_3D('',#42650,#42651,#42652); +#42650 = CARTESIAN_POINT('',(9.000000214576,0.18,0.799997854233)); +#42651 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42652 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42653 = ORIENTED_EDGE('',*,*,#40879,.T.); +#42654 = ORIENTED_EDGE('',*,*,#38136,.F.); +#42655 = ORIENTED_EDGE('',*,*,#38112,.F.); +#42656 = ORIENTED_EDGE('',*,*,#38088,.F.); +#42657 = ORIENTED_EDGE('',*,*,#40801,.T.); +#42658 = PLANE('',#42659); +#42659 = AXIS2_PLACEMENT_3D('',#42660,#42661,#42662); +#42660 = CARTESIAN_POINT('',(8.57126211065,0.18,0.799997956452)); +#42661 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42662 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42663 = ADVANCED_FACE('',(#42664),#42678,.T.); +#42664 = FACE_BOUND('',#42665,.F.); +#42665 = EDGE_LOOP('',(#42666,#42673,#42674,#42675,#42676,#42677)); +#42666 = ORIENTED_EDGE('',*,*,#42667,.F.); +#42667 = EDGE_CURVE('',#41014,#40928,#42668,.T.); +#42668 = CIRCLE('',#42669,0.275); +#42669 = AXIS2_PLACEMENT_3D('',#42670,#42671,#42672); +#42670 = CARTESIAN_POINT('',(9.000000214576,-1.09,0.799997854233)); +#42671 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42672 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42673 = ORIENTED_EDGE('',*,*,#41013,.T.); +#42674 = ORIENTED_EDGE('',*,*,#38235,.F.); +#42675 = ORIENTED_EDGE('',*,*,#38211,.F.); +#42676 = ORIENTED_EDGE('',*,*,#38187,.F.); +#42677 = ORIENTED_EDGE('',*,*,#40935,.T.); +#42678 = PLANE('',#42679); +#42679 = AXIS2_PLACEMENT_3D('',#42680,#42681,#42682); +#42680 = CARTESIAN_POINT('',(8.57126211065,-1.09,0.799997956452)); +#42681 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42682 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42683 = ADVANCED_FACE('',(#42684),#42698,.T.); +#42684 = FACE_BOUND('',#42685,.F.); +#42685 = EDGE_LOOP('',(#42686,#42693,#42694,#42695,#42696,#42697)); +#42686 = ORIENTED_EDGE('',*,*,#42687,.F.); +#42687 = EDGE_CURVE('',#41148,#41062,#42688,.T.); +#42688 = CIRCLE('',#42689,0.275); +#42689 = AXIS2_PLACEMENT_3D('',#42690,#42691,#42692); +#42690 = CARTESIAN_POINT('',(9.000000214576,-2.36,0.799997854233)); +#42691 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42692 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42693 = ORIENTED_EDGE('',*,*,#41147,.T.); +#42694 = ORIENTED_EDGE('',*,*,#38334,.F.); +#42695 = ORIENTED_EDGE('',*,*,#38310,.F.); +#42696 = ORIENTED_EDGE('',*,*,#38286,.F.); +#42697 = ORIENTED_EDGE('',*,*,#41069,.T.); +#42698 = PLANE('',#42699); +#42699 = AXIS2_PLACEMENT_3D('',#42700,#42701,#42702); +#42700 = CARTESIAN_POINT('',(8.57126211065,-2.36,0.799997956452)); +#42701 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42702 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42703 = ADVANCED_FACE('',(#42704),#42718,.T.); +#42704 = FACE_BOUND('',#42705,.F.); +#42705 = EDGE_LOOP('',(#42706,#42713,#42714,#42715,#42716,#42717)); +#42706 = ORIENTED_EDGE('',*,*,#42707,.F.); +#42707 = EDGE_CURVE('',#41282,#41196,#42708,.T.); +#42708 = CIRCLE('',#42709,0.275); +#42709 = AXIS2_PLACEMENT_3D('',#42710,#42711,#42712); +#42710 = CARTESIAN_POINT('',(9.000000214576,-3.63,0.799997854233)); +#42711 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42712 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42713 = ORIENTED_EDGE('',*,*,#41281,.T.); +#42714 = ORIENTED_EDGE('',*,*,#38433,.F.); +#42715 = ORIENTED_EDGE('',*,*,#38409,.F.); +#42716 = ORIENTED_EDGE('',*,*,#38385,.F.); +#42717 = ORIENTED_EDGE('',*,*,#41203,.T.); +#42718 = PLANE('',#42719); +#42719 = AXIS2_PLACEMENT_3D('',#42720,#42721,#42722); +#42720 = CARTESIAN_POINT('',(8.57126211065,-3.63,0.799997956452)); +#42721 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42722 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42723 = ADVANCED_FACE('',(#42724),#42738,.T.); +#42724 = FACE_BOUND('',#42725,.F.); +#42725 = EDGE_LOOP('',(#42726,#42733,#42734,#42735,#42736,#42737)); +#42726 = ORIENTED_EDGE('',*,*,#42727,.F.); +#42727 = EDGE_CURVE('',#41416,#41330,#42728,.T.); +#42728 = CIRCLE('',#42729,0.275); +#42729 = AXIS2_PLACEMENT_3D('',#42730,#42731,#42732); +#42730 = CARTESIAN_POINT('',(9.000000214576,-4.9,0.799997854233)); +#42731 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42732 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42733 = ORIENTED_EDGE('',*,*,#41415,.T.); +#42734 = ORIENTED_EDGE('',*,*,#38532,.F.); +#42735 = ORIENTED_EDGE('',*,*,#38508,.F.); +#42736 = ORIENTED_EDGE('',*,*,#38484,.F.); +#42737 = ORIENTED_EDGE('',*,*,#41337,.T.); +#42738 = PLANE('',#42739); +#42739 = AXIS2_PLACEMENT_3D('',#42740,#42741,#42742); +#42740 = CARTESIAN_POINT('',(8.57126211065,-4.9,0.799997956452)); +#42741 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42742 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42743 = ADVANCED_FACE('',(#42744),#42758,.T.); +#42744 = FACE_BOUND('',#42745,.F.); +#42745 = EDGE_LOOP('',(#42746,#42753,#42754,#42755,#42756,#42757)); +#42746 = ORIENTED_EDGE('',*,*,#42747,.F.); +#42747 = EDGE_CURVE('',#41550,#41464,#42748,.T.); +#42748 = CIRCLE('',#42749,0.275); +#42749 = AXIS2_PLACEMENT_3D('',#42750,#42751,#42752); +#42750 = CARTESIAN_POINT('',(9.000000214576,-6.17,0.799997854233)); +#42751 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42752 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42753 = ORIENTED_EDGE('',*,*,#41549,.T.); +#42754 = ORIENTED_EDGE('',*,*,#38631,.F.); +#42755 = ORIENTED_EDGE('',*,*,#38607,.F.); +#42756 = ORIENTED_EDGE('',*,*,#38583,.F.); +#42757 = ORIENTED_EDGE('',*,*,#41471,.T.); +#42758 = PLANE('',#42759); +#42759 = AXIS2_PLACEMENT_3D('',#42760,#42761,#42762); +#42760 = CARTESIAN_POINT('',(8.57126211065,-6.17,0.799997956452)); +#42761 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42762 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42763 = ADVANCED_FACE('',(#42764),#42778,.T.); +#42764 = FACE_BOUND('',#42765,.F.); +#42765 = EDGE_LOOP('',(#42766,#42773,#42774,#42775,#42776,#42777)); +#42766 = ORIENTED_EDGE('',*,*,#42767,.F.); +#42767 = EDGE_CURVE('',#41684,#41598,#42768,.T.); +#42768 = CIRCLE('',#42769,0.275); +#42769 = AXIS2_PLACEMENT_3D('',#42770,#42771,#42772); +#42770 = CARTESIAN_POINT('',(9.000000214576,-7.44,0.799997854233)); +#42771 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42772 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42773 = ORIENTED_EDGE('',*,*,#41683,.T.); +#42774 = ORIENTED_EDGE('',*,*,#38730,.F.); +#42775 = ORIENTED_EDGE('',*,*,#38706,.F.); +#42776 = ORIENTED_EDGE('',*,*,#38682,.F.); +#42777 = ORIENTED_EDGE('',*,*,#41605,.T.); +#42778 = PLANE('',#42779); +#42779 = AXIS2_PLACEMENT_3D('',#42780,#42781,#42782); +#42780 = CARTESIAN_POINT('',(8.57126211065,-7.44,0.799997956452)); +#42781 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42782 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42783 = ADVANCED_FACE('',(#42784),#42798,.T.); +#42784 = FACE_BOUND('',#42785,.F.); +#42785 = EDGE_LOOP('',(#42786,#42793,#42794,#42795,#42796,#42797)); +#42786 = ORIENTED_EDGE('',*,*,#42787,.F.); +#42787 = EDGE_CURVE('',#41818,#41732,#42788,.T.); +#42788 = CIRCLE('',#42789,0.275); +#42789 = AXIS2_PLACEMENT_3D('',#42790,#42791,#42792); +#42790 = CARTESIAN_POINT('',(9.000000214576,-8.71,0.799997854233)); +#42791 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42792 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42793 = ORIENTED_EDGE('',*,*,#41817,.T.); +#42794 = ORIENTED_EDGE('',*,*,#38829,.F.); +#42795 = ORIENTED_EDGE('',*,*,#38805,.F.); +#42796 = ORIENTED_EDGE('',*,*,#38781,.F.); +#42797 = ORIENTED_EDGE('',*,*,#41739,.T.); +#42798 = PLANE('',#42799); +#42799 = AXIS2_PLACEMENT_3D('',#42800,#42801,#42802); +#42800 = CARTESIAN_POINT('',(8.57126211065,-8.71,0.799997956452)); +#42801 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42802 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42803 = ADVANCED_FACE('',(#42804),#42818,.T.); +#42804 = FACE_BOUND('',#42805,.F.); +#42805 = EDGE_LOOP('',(#42806,#42813,#42814,#42815,#42816,#42817)); +#42806 = ORIENTED_EDGE('',*,*,#42807,.F.); +#42807 = EDGE_CURVE('',#41952,#41866,#42808,.T.); +#42808 = CIRCLE('',#42809,0.275); +#42809 = AXIS2_PLACEMENT_3D('',#42810,#42811,#42812); +#42810 = CARTESIAN_POINT('',(9.000000214576,-9.98,0.799997854233)); +#42811 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42812 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42813 = ORIENTED_EDGE('',*,*,#41951,.T.); +#42814 = ORIENTED_EDGE('',*,*,#38928,.F.); +#42815 = ORIENTED_EDGE('',*,*,#38904,.F.); +#42816 = ORIENTED_EDGE('',*,*,#38880,.F.); +#42817 = ORIENTED_EDGE('',*,*,#41873,.T.); +#42818 = PLANE('',#42819); +#42819 = AXIS2_PLACEMENT_3D('',#42820,#42821,#42822); +#42820 = CARTESIAN_POINT('',(8.57126211065,-9.98,0.799997956452)); +#42821 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42822 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42823 = ADVANCED_FACE('',(#42824),#42838,.T.); +#42824 = FACE_BOUND('',#42825,.F.); +#42825 = EDGE_LOOP('',(#42826,#42833,#42834,#42835,#42836,#42837)); +#42826 = ORIENTED_EDGE('',*,*,#42827,.F.); +#42827 = EDGE_CURVE('',#42086,#42000,#42828,.T.); +#42828 = CIRCLE('',#42829,0.275); +#42829 = AXIS2_PLACEMENT_3D('',#42830,#42831,#42832); +#42830 = CARTESIAN_POINT('',(9.000000214576,-11.25,0.799997854233)); +#42831 = DIRECTION('',(-2.3841859331E-07,0.,-1.)); +#42832 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#42833 = ORIENTED_EDGE('',*,*,#42085,.T.); +#42834 = ORIENTED_EDGE('',*,*,#39027,.F.); +#42835 = ORIENTED_EDGE('',*,*,#39003,.F.); +#42836 = ORIENTED_EDGE('',*,*,#38979,.F.); +#42837 = ORIENTED_EDGE('',*,*,#42007,.T.); +#42838 = PLANE('',#42839); +#42839 = AXIS2_PLACEMENT_3D('',#42840,#42841,#42842); +#42840 = CARTESIAN_POINT('',(8.57126211065,-11.25,0.799997956452)); +#42841 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#42842 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#42843 = ADVANCED_FACE('',(#42844),#42863,.T.); +#42844 = FACE_BOUND('',#42845,.T.); +#42845 = EDGE_LOOP('',(#42846,#42847,#42856)); +#42846 = ORIENTED_EDGE('',*,*,#39391,.F.); +#42847 = ORIENTED_EDGE('',*,*,#42848,.T.); +#42848 = EDGE_CURVE('',#39384,#42849,#42851,.T.); +#42849 = VERTEX_POINT('',#42850); +#42850 = CARTESIAN_POINT('',(-7.65,5.65,3.1)); +#42851 = CIRCLE('',#42852,0.25); +#42852 = AXIS2_PLACEMENT_3D('',#42853,#42854,#42855); +#42853 = CARTESIAN_POINT('',(-7.65,5.65,2.85)); +#42854 = DIRECTION('',(0.,1.,-6.E-17)); +#42855 = DIRECTION('',(0.,6.E-17,1.)); +#42856 = ORIENTED_EDGE('',*,*,#42857,.F.); +#42857 = EDGE_CURVE('',#39392,#42849,#42858,.T.); +#42858 = CIRCLE('',#42859,0.25); +#42859 = AXIS2_PLACEMENT_3D('',#42860,#42861,#42862); +#42860 = CARTESIAN_POINT('',(-7.65,5.65,2.85)); +#42861 = DIRECTION('',(1.,0.,0.)); +#42862 = DIRECTION('',(-0.,1.,0.)); +#42863 = SPHERICAL_SURFACE('',#42864,0.25); +#42864 = AXIS2_PLACEMENT_3D('',#42865,#42866,#42867); +#42865 = CARTESIAN_POINT('',(-7.65,5.65,2.85)); +#42866 = DIRECTION('',(1.,0.,0.)); +#42867 = DIRECTION('',(-0.,1.,0.)); +#42868 = ADVANCED_FACE('',(#42869),#42888,.T.); +#42869 = FACE_BOUND('',#42870,.T.); +#42870 = EDGE_LOOP('',(#42871,#42880,#42886,#42887)); +#42871 = ORIENTED_EDGE('',*,*,#42872,.F.); +#42872 = EDGE_CURVE('',#42873,#39416,#42875,.T.); +#42873 = VERTEX_POINT('',#42874); +#42874 = CARTESIAN_POINT('',(-7.65,-11.45,3.1)); +#42875 = CIRCLE('',#42876,0.25); +#42876 = AXIS2_PLACEMENT_3D('',#42877,#42878,#42879); +#42877 = CARTESIAN_POINT('',(-7.65,-11.45,2.85)); +#42878 = DIRECTION('',(6.E-17,-1.,0.)); +#42879 = DIRECTION('',(-1.,-6.E-17,0.)); +#42880 = ORIENTED_EDGE('',*,*,#42881,.T.); +#42881 = EDGE_CURVE('',#42873,#42849,#42882,.T.); +#42882 = LINE('',#42883,#42884); +#42883 = CARTESIAN_POINT('',(-7.65,-11.7,3.1)); +#42884 = VECTOR('',#42885,1.); +#42885 = DIRECTION('',(0.,1.,0.)); +#42886 = ORIENTED_EDGE('',*,*,#42848,.F.); +#42887 = ORIENTED_EDGE('',*,*,#39423,.F.); +#42888 = CYLINDRICAL_SURFACE('',#42889,0.25); +#42889 = AXIS2_PLACEMENT_3D('',#42890,#42891,#42892); +#42890 = CARTESIAN_POINT('',(-7.65,-11.7,2.85)); +#42891 = DIRECTION('',(0.,1.,0.)); +#42892 = DIRECTION('',(-1.,0.,0.)); +#42893 = ADVANCED_FACE('',(#42894),#42905,.T.); +#42894 = FACE_BOUND('',#42895,.T.); +#42895 = EDGE_LOOP('',(#42896,#42903,#42904)); +#42896 = ORIENTED_EDGE('',*,*,#42897,.F.); +#42897 = EDGE_CURVE('',#42873,#39439,#42898,.T.); +#42898 = CIRCLE('',#42899,0.25); +#42899 = AXIS2_PLACEMENT_3D('',#42900,#42901,#42902); +#42900 = CARTESIAN_POINT('',(-7.65,-11.45,2.85)); +#42901 = DIRECTION('',(1.,0.,0.)); +#42902 = DIRECTION('',(0.,-1.,0.)); +#42903 = ORIENTED_EDGE('',*,*,#42872,.T.); +#42904 = ORIENTED_EDGE('',*,*,#39446,.F.); +#42905 = SPHERICAL_SURFACE('',#42906,0.25); +#42906 = AXIS2_PLACEMENT_3D('',#42907,#42908,#42909); +#42907 = CARTESIAN_POINT('',(-7.65,-11.45,2.85)); +#42908 = DIRECTION('',(-0.,-0.,-1.)); +#42909 = DIRECTION('',(0.,-1.,0.)); +#42910 = ADVANCED_FACE('',(#42911),#42930,.T.); +#42911 = FACE_BOUND('',#42912,.T.); +#42912 = EDGE_LOOP('',(#42913,#42922,#42928,#42929)); +#42913 = ORIENTED_EDGE('',*,*,#42914,.F.); +#42914 = EDGE_CURVE('',#42915,#39465,#42917,.T.); +#42915 = VERTEX_POINT('',#42916); +#42916 = CARTESIAN_POINT('',(7.65,-11.45,3.1)); +#42917 = CIRCLE('',#42918,0.25); +#42918 = AXIS2_PLACEMENT_3D('',#42919,#42920,#42921); +#42919 = CARTESIAN_POINT('',(7.65,-11.45,2.85)); +#42920 = DIRECTION('',(1.,0.,0.)); +#42921 = DIRECTION('',(0.,-1.,0.)); +#42922 = ORIENTED_EDGE('',*,*,#42923,.T.); +#42923 = EDGE_CURVE('',#42915,#42873,#42924,.T.); +#42924 = LINE('',#42925,#42926); +#42925 = CARTESIAN_POINT('',(7.9,-11.45,3.1)); +#42926 = VECTOR('',#42927,1.); +#42927 = DIRECTION('',(-1.,0.,0.)); +#42928 = ORIENTED_EDGE('',*,*,#42897,.T.); +#42929 = ORIENTED_EDGE('',*,*,#39472,.F.); +#42930 = CYLINDRICAL_SURFACE('',#42931,0.25); +#42931 = AXIS2_PLACEMENT_3D('',#42932,#42933,#42934); +#42932 = CARTESIAN_POINT('',(7.9,-11.45,2.85)); +#42933 = DIRECTION('',(-1.,0.,0.)); +#42934 = DIRECTION('',(0.,-1.,0.)); +#42935 = ADVANCED_FACE('',(#42936),#42947,.T.); +#42936 = FACE_BOUND('',#42937,.T.); +#42937 = EDGE_LOOP('',(#42938,#42939,#42946)); +#42938 = ORIENTED_EDGE('',*,*,#39495,.T.); +#42939 = ORIENTED_EDGE('',*,*,#42940,.F.); +#42940 = EDGE_CURVE('',#42915,#39488,#42941,.T.); +#42941 = CIRCLE('',#42942,0.25); +#42942 = AXIS2_PLACEMENT_3D('',#42943,#42944,#42945); +#42943 = CARTESIAN_POINT('',(7.65,-11.45,2.85)); +#42944 = DIRECTION('',(6.E-17,1.,0.)); +#42945 = DIRECTION('',(1.,-6.E-17,0.)); +#42946 = ORIENTED_EDGE('',*,*,#42914,.T.); +#42947 = SPHERICAL_SURFACE('',#42948,0.25); +#42948 = AXIS2_PLACEMENT_3D('',#42949,#42950,#42951); +#42949 = CARTESIAN_POINT('',(7.65,-11.45,2.85)); +#42950 = DIRECTION('',(-0.,-0.,-1.)); +#42951 = DIRECTION('',(0.,-1.,0.)); +#42952 = ADVANCED_FACE('',(#42953),#42972,.T.); +#42953 = FACE_BOUND('',#42954,.T.); +#42954 = EDGE_LOOP('',(#42955,#42956,#42965,#42971)); +#42955 = ORIENTED_EDGE('',*,*,#39521,.F.); +#42956 = ORIENTED_EDGE('',*,*,#42957,.T.); +#42957 = EDGE_CURVE('',#39514,#42958,#42960,.T.); +#42958 = VERTEX_POINT('',#42959); +#42959 = CARTESIAN_POINT('',(7.65,5.65,3.1)); +#42960 = CIRCLE('',#42961,0.25); +#42961 = AXIS2_PLACEMENT_3D('',#42962,#42963,#42964); +#42962 = CARTESIAN_POINT('',(7.65,5.65,2.85)); +#42963 = DIRECTION('',(0.,-1.,0.)); +#42964 = DIRECTION('',(1.,0.,0.)); +#42965 = ORIENTED_EDGE('',*,*,#42966,.T.); +#42966 = EDGE_CURVE('',#42958,#42915,#42967,.T.); +#42967 = LINE('',#42968,#42969); +#42968 = CARTESIAN_POINT('',(7.65,5.9,3.1)); +#42969 = VECTOR('',#42970,1.); +#42970 = DIRECTION('',(0.,-1.,0.)); +#42971 = ORIENTED_EDGE('',*,*,#42940,.T.); +#42972 = CYLINDRICAL_SURFACE('',#42973,0.25); +#42973 = AXIS2_PLACEMENT_3D('',#42974,#42975,#42976); +#42974 = CARTESIAN_POINT('',(7.65,5.9,2.85)); +#42975 = DIRECTION('',(0.,-1.,0.)); +#42976 = DIRECTION('',(1.,0.,0.)); +#42977 = ADVANCED_FACE('',(#42978),#42989,.T.); +#42978 = FACE_BOUND('',#42979,.T.); +#42979 = EDGE_LOOP('',(#42980,#42981,#42988)); +#42980 = ORIENTED_EDGE('',*,*,#39544,.F.); +#42981 = ORIENTED_EDGE('',*,*,#42982,.T.); +#42982 = EDGE_CURVE('',#39537,#42958,#42983,.T.); +#42983 = CIRCLE('',#42984,0.25); +#42984 = AXIS2_PLACEMENT_3D('',#42985,#42986,#42987); +#42985 = CARTESIAN_POINT('',(7.65,5.65,2.85)); +#42986 = DIRECTION('',(1.,0.,-6.E-17)); +#42987 = DIRECTION('',(6.E-17,0.,1.)); +#42988 = ORIENTED_EDGE('',*,*,#42957,.F.); +#42989 = SPHERICAL_SURFACE('',#42990,0.25); +#42990 = AXIS2_PLACEMENT_3D('',#42991,#42992,#42993); +#42991 = CARTESIAN_POINT('',(7.65,5.65,2.85)); +#42992 = DIRECTION('',(0.,-1.,0.)); +#42993 = DIRECTION('',(1.,0.,0.)); +#42994 = ADVANCED_FACE('',(#42995),#43006,.T.); +#42995 = FACE_BOUND('',#42996,.T.); +#42996 = EDGE_LOOP('',(#42997,#42998,#42999,#43005)); +#42997 = ORIENTED_EDGE('',*,*,#39563,.F.); +#42998 = ORIENTED_EDGE('',*,*,#42857,.T.); +#42999 = ORIENTED_EDGE('',*,*,#43000,.T.); +#43000 = EDGE_CURVE('',#42849,#42958,#43001,.T.); +#43001 = LINE('',#43002,#43003); +#43002 = CARTESIAN_POINT('',(-7.9,5.65,3.1)); +#43003 = VECTOR('',#43004,1.); +#43004 = DIRECTION('',(1.,0.,0.)); +#43005 = ORIENTED_EDGE('',*,*,#42982,.F.); +#43006 = CYLINDRICAL_SURFACE('',#43007,0.25); +#43007 = AXIS2_PLACEMENT_3D('',#43008,#43009,#43010); +#43008 = CARTESIAN_POINT('',(-7.9,5.65,2.85)); +#43009 = DIRECTION('',(1.,0.,0.)); +#43010 = DIRECTION('',(-0.,1.,0.)); +#43011 = ADVANCED_FACE('',(#43012),#43042,.T.); +#43012 = FACE_BOUND('',#43013,.T.); +#43013 = EDGE_LOOP('',(#43014,#43015,#43016,#43017,#43018,#43019,#43020, + #43021,#43022,#43023,#43024,#43025,#43026,#43027,#43028,#43029, + #43030,#43031,#43032,#43033,#43034,#43035,#43036,#43037,#43038, + #43039,#43040,#43041)); +#43014 = ORIENTED_EDGE('',*,*,#39586,.T.); +#43015 = ORIENTED_EDGE('',*,*,#39610,.T.); +#43016 = ORIENTED_EDGE('',*,*,#39634,.T.); +#43017 = ORIENTED_EDGE('',*,*,#39658,.T.); +#43018 = ORIENTED_EDGE('',*,*,#39682,.T.); +#43019 = ORIENTED_EDGE('',*,*,#39706,.T.); +#43020 = ORIENTED_EDGE('',*,*,#39730,.T.); +#43021 = ORIENTED_EDGE('',*,*,#39754,.T.); +#43022 = ORIENTED_EDGE('',*,*,#39778,.T.); +#43023 = ORIENTED_EDGE('',*,*,#39802,.T.); +#43024 = ORIENTED_EDGE('',*,*,#39826,.T.); +#43025 = ORIENTED_EDGE('',*,*,#39850,.T.); +#43026 = ORIENTED_EDGE('',*,*,#39874,.T.); +#43027 = ORIENTED_EDGE('',*,*,#39898,.T.); +#43028 = ORIENTED_EDGE('',*,*,#39922,.T.); +#43029 = ORIENTED_EDGE('',*,*,#39946,.T.); +#43030 = ORIENTED_EDGE('',*,*,#39970,.T.); +#43031 = ORIENTED_EDGE('',*,*,#39994,.T.); +#43032 = ORIENTED_EDGE('',*,*,#40018,.T.); +#43033 = ORIENTED_EDGE('',*,*,#40042,.T.); +#43034 = ORIENTED_EDGE('',*,*,#40066,.T.); +#43035 = ORIENTED_EDGE('',*,*,#40090,.T.); +#43036 = ORIENTED_EDGE('',*,*,#40114,.T.); +#43037 = ORIENTED_EDGE('',*,*,#40138,.T.); +#43038 = ORIENTED_EDGE('',*,*,#40162,.T.); +#43039 = ORIENTED_EDGE('',*,*,#40186,.T.); +#43040 = ORIENTED_EDGE('',*,*,#40210,.T.); +#43041 = ORIENTED_EDGE('',*,*,#40234,.T.); +#43042 = PLANE('',#43043); +#43043 = AXIS2_PLACEMENT_3D('',#43044,#43045,#43046); +#43044 = CARTESIAN_POINT('',(0.444805194805,10.090909090909,1.)); +#43045 = DIRECTION('',(0.,0.,1.)); +#43046 = DIRECTION('',(1.,0.,-0.)); +#43047 = ADVANCED_FACE('',(#43048),#43054,.F.); +#43048 = FACE_BOUND('',#43049,.F.); +#43049 = EDGE_LOOP('',(#43050,#43051,#43052,#43053)); +#43050 = ORIENTED_EDGE('',*,*,#40485,.T.); +#43051 = ORIENTED_EDGE('',*,*,#42587,.T.); +#43052 = ORIENTED_EDGE('',*,*,#40391,.F.); +#43053 = ORIENTED_EDGE('',*,*,#40446,.F.); +#43054 = CYLINDRICAL_SURFACE('',#43055,0.275); +#43055 = AXIS2_PLACEMENT_3D('',#43056,#43057,#43058); +#43056 = CARTESIAN_POINT('',(9.000000023842,3.99,-2.14576734264E-06)); +#43057 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43058 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43059 = ADVANCED_FACE('',(#43060),#43066,.F.); +#43060 = FACE_BOUND('',#43061,.F.); +#43061 = EDGE_LOOP('',(#43062,#43063,#43064,#43065)); +#43062 = ORIENTED_EDGE('',*,*,#40619,.T.); +#43063 = ORIENTED_EDGE('',*,*,#42607,.T.); +#43064 = ORIENTED_EDGE('',*,*,#40525,.F.); +#43065 = ORIENTED_EDGE('',*,*,#40580,.F.); +#43066 = CYLINDRICAL_SURFACE('',#43067,0.275); +#43067 = AXIS2_PLACEMENT_3D('',#43068,#43069,#43070); +#43068 = CARTESIAN_POINT('',(9.000000023842,2.72,-2.14576734264E-06)); +#43069 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43070 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43071 = ADVANCED_FACE('',(#43072),#43078,.F.); +#43072 = FACE_BOUND('',#43073,.F.); +#43073 = EDGE_LOOP('',(#43074,#43075,#43076,#43077)); +#43074 = ORIENTED_EDGE('',*,*,#40753,.T.); +#43075 = ORIENTED_EDGE('',*,*,#42627,.T.); +#43076 = ORIENTED_EDGE('',*,*,#40659,.F.); +#43077 = ORIENTED_EDGE('',*,*,#40714,.F.); +#43078 = CYLINDRICAL_SURFACE('',#43079,0.275); +#43079 = AXIS2_PLACEMENT_3D('',#43080,#43081,#43082); +#43080 = CARTESIAN_POINT('',(9.000000023842,1.45,-2.14576734264E-06)); +#43081 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43082 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43083 = ADVANCED_FACE('',(#43084),#43090,.F.); +#43084 = FACE_BOUND('',#43085,.F.); +#43085 = EDGE_LOOP('',(#43086,#43087,#43088,#43089)); +#43086 = ORIENTED_EDGE('',*,*,#40887,.T.); +#43087 = ORIENTED_EDGE('',*,*,#42647,.T.); +#43088 = ORIENTED_EDGE('',*,*,#40793,.F.); +#43089 = ORIENTED_EDGE('',*,*,#40848,.F.); +#43090 = CYLINDRICAL_SURFACE('',#43091,0.275); +#43091 = AXIS2_PLACEMENT_3D('',#43092,#43093,#43094); +#43092 = CARTESIAN_POINT('',(9.000000023842,0.18,-2.14576734264E-06)); +#43093 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43094 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43095 = ADVANCED_FACE('',(#43096),#43102,.F.); +#43096 = FACE_BOUND('',#43097,.F.); +#43097 = EDGE_LOOP('',(#43098,#43099,#43100,#43101)); +#43098 = ORIENTED_EDGE('',*,*,#41021,.T.); +#43099 = ORIENTED_EDGE('',*,*,#42667,.T.); +#43100 = ORIENTED_EDGE('',*,*,#40927,.F.); +#43101 = ORIENTED_EDGE('',*,*,#40982,.F.); +#43102 = CYLINDRICAL_SURFACE('',#43103,0.275); +#43103 = AXIS2_PLACEMENT_3D('',#43104,#43105,#43106); +#43104 = CARTESIAN_POINT('',(9.000000023842,-1.09,-2.14576734264E-06)); +#43105 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43106 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43107 = ADVANCED_FACE('',(#43108),#43114,.F.); +#43108 = FACE_BOUND('',#43109,.F.); +#43109 = EDGE_LOOP('',(#43110,#43111,#43112,#43113)); +#43110 = ORIENTED_EDGE('',*,*,#41155,.T.); +#43111 = ORIENTED_EDGE('',*,*,#42687,.T.); +#43112 = ORIENTED_EDGE('',*,*,#41061,.F.); +#43113 = ORIENTED_EDGE('',*,*,#41116,.F.); +#43114 = CYLINDRICAL_SURFACE('',#43115,0.275); +#43115 = AXIS2_PLACEMENT_3D('',#43116,#43117,#43118); +#43116 = CARTESIAN_POINT('',(9.000000023842,-2.36,-2.14576734264E-06)); +#43117 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43118 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43119 = ADVANCED_FACE('',(#43120),#43126,.F.); +#43120 = FACE_BOUND('',#43121,.F.); +#43121 = EDGE_LOOP('',(#43122,#43123,#43124,#43125)); +#43122 = ORIENTED_EDGE('',*,*,#41289,.T.); +#43123 = ORIENTED_EDGE('',*,*,#42707,.T.); +#43124 = ORIENTED_EDGE('',*,*,#41195,.F.); +#43125 = ORIENTED_EDGE('',*,*,#41250,.F.); +#43126 = CYLINDRICAL_SURFACE('',#43127,0.275); +#43127 = AXIS2_PLACEMENT_3D('',#43128,#43129,#43130); +#43128 = CARTESIAN_POINT('',(9.000000023842,-3.63,-2.14576734264E-06)); +#43129 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43130 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43131 = ADVANCED_FACE('',(#43132),#43138,.F.); +#43132 = FACE_BOUND('',#43133,.F.); +#43133 = EDGE_LOOP('',(#43134,#43135,#43136,#43137)); +#43134 = ORIENTED_EDGE('',*,*,#41423,.T.); +#43135 = ORIENTED_EDGE('',*,*,#42727,.T.); +#43136 = ORIENTED_EDGE('',*,*,#41329,.F.); +#43137 = ORIENTED_EDGE('',*,*,#41384,.F.); +#43138 = CYLINDRICAL_SURFACE('',#43139,0.275); +#43139 = AXIS2_PLACEMENT_3D('',#43140,#43141,#43142); +#43140 = CARTESIAN_POINT('',(9.000000023842,-4.9,-2.14576734264E-06)); +#43141 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43142 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43143 = ADVANCED_FACE('',(#43144),#43150,.F.); +#43144 = FACE_BOUND('',#43145,.F.); +#43145 = EDGE_LOOP('',(#43146,#43147,#43148,#43149)); +#43146 = ORIENTED_EDGE('',*,*,#41557,.T.); +#43147 = ORIENTED_EDGE('',*,*,#42747,.T.); +#43148 = ORIENTED_EDGE('',*,*,#41463,.F.); +#43149 = ORIENTED_EDGE('',*,*,#41518,.F.); +#43150 = CYLINDRICAL_SURFACE('',#43151,0.275); +#43151 = AXIS2_PLACEMENT_3D('',#43152,#43153,#43154); +#43152 = CARTESIAN_POINT('',(9.000000023842,-6.17,-2.14576734264E-06)); +#43153 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43154 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43155 = ADVANCED_FACE('',(#43156),#43162,.F.); +#43156 = FACE_BOUND('',#43157,.F.); +#43157 = EDGE_LOOP('',(#43158,#43159,#43160,#43161)); +#43158 = ORIENTED_EDGE('',*,*,#41691,.T.); +#43159 = ORIENTED_EDGE('',*,*,#42767,.T.); +#43160 = ORIENTED_EDGE('',*,*,#41597,.F.); +#43161 = ORIENTED_EDGE('',*,*,#41652,.F.); +#43162 = CYLINDRICAL_SURFACE('',#43163,0.275); +#43163 = AXIS2_PLACEMENT_3D('',#43164,#43165,#43166); +#43164 = CARTESIAN_POINT('',(9.000000023842,-7.44,-2.14576734264E-06)); +#43165 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43166 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43167 = ADVANCED_FACE('',(#43168),#43174,.F.); +#43168 = FACE_BOUND('',#43169,.F.); +#43169 = EDGE_LOOP('',(#43170,#43171,#43172,#43173)); +#43170 = ORIENTED_EDGE('',*,*,#41825,.T.); +#43171 = ORIENTED_EDGE('',*,*,#42787,.T.); +#43172 = ORIENTED_EDGE('',*,*,#41731,.F.); +#43173 = ORIENTED_EDGE('',*,*,#41786,.F.); +#43174 = CYLINDRICAL_SURFACE('',#43175,0.275); +#43175 = AXIS2_PLACEMENT_3D('',#43176,#43177,#43178); +#43176 = CARTESIAN_POINT('',(9.000000023842,-8.71,-2.14576734264E-06)); +#43177 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43178 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43179 = ADVANCED_FACE('',(#43180),#43186,.F.); +#43180 = FACE_BOUND('',#43181,.F.); +#43181 = EDGE_LOOP('',(#43182,#43183,#43184,#43185)); +#43182 = ORIENTED_EDGE('',*,*,#41959,.T.); +#43183 = ORIENTED_EDGE('',*,*,#42807,.T.); +#43184 = ORIENTED_EDGE('',*,*,#41865,.F.); +#43185 = ORIENTED_EDGE('',*,*,#41920,.F.); +#43186 = CYLINDRICAL_SURFACE('',#43187,0.275); +#43187 = AXIS2_PLACEMENT_3D('',#43188,#43189,#43190); +#43188 = CARTESIAN_POINT('',(9.000000023842,-9.98,-2.14576734264E-06)); +#43189 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43190 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43191 = ADVANCED_FACE('',(#43192),#43198,.F.); +#43192 = FACE_BOUND('',#43193,.F.); +#43193 = EDGE_LOOP('',(#43194,#43195,#43196,#43197)); +#43194 = ORIENTED_EDGE('',*,*,#42093,.T.); +#43195 = ORIENTED_EDGE('',*,*,#42827,.T.); +#43196 = ORIENTED_EDGE('',*,*,#41999,.F.); +#43197 = ORIENTED_EDGE('',*,*,#42054,.F.); +#43198 = CYLINDRICAL_SURFACE('',#43199,0.275); +#43199 = AXIS2_PLACEMENT_3D('',#43200,#43201,#43202); +#43200 = CARTESIAN_POINT('',(9.000000023842,-11.25,-2.14576734264E-06)); +#43201 = DIRECTION('',(-2.3841859331E-07,-0.,-1.)); +#43202 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43203 = ADVANCED_FACE('',(#43204,#43210),#43221,.T.); +#43204 = FACE_BOUND('',#43205,.T.); +#43205 = EDGE_LOOP('',(#43206,#43207,#43208,#43209)); +#43206 = ORIENTED_EDGE('',*,*,#42923,.F.); +#43207 = ORIENTED_EDGE('',*,*,#42966,.F.); +#43208 = ORIENTED_EDGE('',*,*,#43000,.F.); +#43209 = ORIENTED_EDGE('',*,*,#42881,.F.); +#43210 = FACE_BOUND('',#43211,.T.); +#43211 = EDGE_LOOP('',(#43212)); +#43212 = ORIENTED_EDGE('',*,*,#43213,.F.); +#43213 = EDGE_CURVE('',#43214,#43214,#43216,.T.); +#43214 = VERTEX_POINT('',#43215); +#43215 = CARTESIAN_POINT('',(-5.45,-9.6,3.1)); +#43216 = CIRCLE('',#43217,0.25); +#43217 = AXIS2_PLACEMENT_3D('',#43218,#43219,#43220); +#43218 = CARTESIAN_POINT('',(-5.7,-9.6,3.1)); +#43219 = DIRECTION('',(0.,0.,1.)); +#43220 = DIRECTION('',(1.,0.,-0.)); +#43221 = PLANE('',#43222); +#43222 = AXIS2_PLACEMENT_3D('',#43223,#43224,#43225); +#43223 = CARTESIAN_POINT('',(0.,-2.9,3.1)); +#43224 = DIRECTION('',(0.,0.,1.)); +#43225 = DIRECTION('',(1.,0.,-0.)); +#43226 = ADVANCED_FACE('',(#43227),#43246,.F.); +#43227 = FACE_BOUND('',#43228,.F.); +#43228 = EDGE_LOOP('',(#43229,#43237,#43244,#43245)); +#43229 = ORIENTED_EDGE('',*,*,#43230,.T.); +#43230 = EDGE_CURVE('',#43214,#43231,#43233,.T.); +#43231 = VERTEX_POINT('',#43232); +#43232 = CARTESIAN_POINT('',(-5.45,-9.6,1.1)); +#43233 = LINE('',#43234,#43235); +#43234 = CARTESIAN_POINT('',(-5.45,-9.6,3.1)); +#43235 = VECTOR('',#43236,1.); +#43236 = DIRECTION('',(-0.,-0.,-1.)); +#43237 = ORIENTED_EDGE('',*,*,#43238,.T.); +#43238 = EDGE_CURVE('',#43231,#43231,#43239,.T.); +#43239 = CIRCLE('',#43240,0.25); +#43240 = AXIS2_PLACEMENT_3D('',#43241,#43242,#43243); +#43241 = CARTESIAN_POINT('',(-5.7,-9.6,1.1)); +#43242 = DIRECTION('',(0.,0.,1.)); +#43243 = DIRECTION('',(1.,0.,-0.)); +#43244 = ORIENTED_EDGE('',*,*,#43230,.F.); +#43245 = ORIENTED_EDGE('',*,*,#43213,.F.); +#43246 = CYLINDRICAL_SURFACE('',#43247,0.25); +#43247 = AXIS2_PLACEMENT_3D('',#43248,#43249,#43250); +#43248 = CARTESIAN_POINT('',(-5.7,-9.6,3.1)); +#43249 = DIRECTION('',(0.,0.,1.)); +#43250 = DIRECTION('',(1.,0.,-0.)); +#43251 = ADVANCED_FACE('',(#43252),#43255,.T.); +#43252 = FACE_BOUND('',#43253,.T.); +#43253 = EDGE_LOOP('',(#43254)); +#43254 = ORIENTED_EDGE('',*,*,#43238,.T.); +#43255 = PLANE('',#43256); +#43256 = AXIS2_PLACEMENT_3D('',#43257,#43258,#43259); +#43257 = CARTESIAN_POINT('',(-5.7,-9.6,1.1)); +#43258 = DIRECTION('',(0.,0.,1.)); +#43259 = DIRECTION('',(1.,0.,-0.)); +#43260 = ORIENTED_CLOSED_SHELL('',*,#43261,.F.); +#43261 = CLOSED_SHELL('',(#43262,#43302,#43333,#43357,#43381,#43398)); +#43262 = ADVANCED_FACE('',(#43263),#43297,.T.); +#43263 = FACE_BOUND('',#43264,.F.); +#43264 = EDGE_LOOP('',(#43265,#43275,#43283,#43291)); +#43265 = ORIENTED_EDGE('',*,*,#43266,.F.); +#43266 = EDGE_CURVE('',#43267,#43269,#43271,.T.); +#43267 = VERTEX_POINT('',#43268); +#43268 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#43269 = VERTEX_POINT('',#43270); +#43270 = CARTESIAN_POINT('',(8.550000119209,-10.8,0.399997961521)); +#43271 = LINE('',#43272,#43273); +#43272 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#43273 = VECTOR('',#43274,1.); +#43274 = DIRECTION('',(0.,0.,-1.)); +#43275 = ORIENTED_EDGE('',*,*,#43276,.T.); +#43276 = EDGE_CURVE('',#43267,#43277,#43279,.T.); +#43277 = VERTEX_POINT('',#43278); +#43278 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#43279 = LINE('',#43280,#43281); +#43280 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#43281 = VECTOR('',#43282,1.); +#43282 = DIRECTION('',(-1.,-0.,-0.)); +#43283 = ORIENTED_EDGE('',*,*,#43284,.T.); +#43284 = EDGE_CURVE('',#43277,#43285,#43287,.T.); +#43285 = VERTEX_POINT('',#43286); +#43286 = CARTESIAN_POINT('',(8.150000119209,-10.8,0.399998056888)); +#43287 = LINE('',#43288,#43289); +#43288 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#43289 = VECTOR('',#43290,1.); +#43290 = DIRECTION('',(0.,0.,-1.)); +#43291 = ORIENTED_EDGE('',*,*,#43292,.T.); +#43292 = EDGE_CURVE('',#43285,#43269,#43293,.T.); +#43293 = LINE('',#43294,#43295); +#43294 = CARTESIAN_POINT('',(8.150000119209,-10.8,0.399998056888)); +#43295 = VECTOR('',#43296,1.); +#43296 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43297 = PLANE('',#43298); +#43298 = AXIS2_PLACEMENT_3D('',#43299,#43300,#43301); +#43299 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#43300 = DIRECTION('',(0.,1.,0.)); +#43301 = DIRECTION('',(0.,-0.,1.)); +#43302 = ADVANCED_FACE('',(#43303),#43328,.T.); +#43303 = FACE_BOUND('',#43304,.T.); +#43304 = EDGE_LOOP('',(#43305,#43315,#43321,#43322)); +#43305 = ORIENTED_EDGE('',*,*,#43306,.T.); +#43306 = EDGE_CURVE('',#43307,#43309,#43311,.T.); +#43307 = VERTEX_POINT('',#43308); +#43308 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#43309 = VERTEX_POINT('',#43310); +#43310 = CARTESIAN_POINT('',(8.550000119209,-11.7,0.399997961521)); +#43311 = LINE('',#43312,#43313); +#43312 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#43313 = VECTOR('',#43314,1.); +#43314 = DIRECTION('',(0.,0.,-1.)); +#43315 = ORIENTED_EDGE('',*,*,#43316,.F.); +#43316 = EDGE_CURVE('',#43269,#43309,#43317,.T.); +#43317 = LINE('',#43318,#43319); +#43318 = CARTESIAN_POINT('',(8.550000119209,-10.8,0.399997961521)); +#43319 = VECTOR('',#43320,1.); +#43320 = DIRECTION('',(0.,-1.,0.)); +#43321 = ORIENTED_EDGE('',*,*,#43266,.F.); +#43322 = ORIENTED_EDGE('',*,*,#43323,.T.); +#43323 = EDGE_CURVE('',#43267,#43307,#43324,.T.); +#43324 = LINE('',#43325,#43326); +#43325 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#43326 = VECTOR('',#43327,1.); +#43327 = DIRECTION('',(-0.,-1.,-0.)); +#43328 = PLANE('',#43329); +#43329 = AXIS2_PLACEMENT_3D('',#43330,#43331,#43332); +#43330 = CARTESIAN_POINT('',(8.550000214576,-10.8,0.799997961521)); +#43331 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43332 = DIRECTION('',(0.,1.,0.)); +#43333 = ADVANCED_FACE('',(#43334),#43352,.F.); +#43334 = FACE_BOUND('',#43335,.T.); +#43335 = EDGE_LOOP('',(#43336,#43337,#43345,#43351)); +#43336 = ORIENTED_EDGE('',*,*,#43316,.T.); +#43337 = ORIENTED_EDGE('',*,*,#43338,.T.); +#43338 = EDGE_CURVE('',#43309,#43339,#43341,.T.); +#43339 = VERTEX_POINT('',#43340); +#43340 = CARTESIAN_POINT('',(8.150000119209,-11.7,0.399998056888)); +#43341 = LINE('',#43342,#43343); +#43342 = CARTESIAN_POINT('',(8.550000119209,-11.7,0.399997961521)); +#43343 = VECTOR('',#43344,1.); +#43344 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43345 = ORIENTED_EDGE('',*,*,#43346,.T.); +#43346 = EDGE_CURVE('',#43339,#43285,#43347,.T.); +#43347 = LINE('',#43348,#43349); +#43348 = CARTESIAN_POINT('',(8.150000119209,-11.7,0.399998056888)); +#43349 = VECTOR('',#43350,1.); +#43350 = DIRECTION('',(0.,1.,0.)); +#43351 = ORIENTED_EDGE('',*,*,#43292,.T.); +#43352 = PLANE('',#43353); +#43353 = AXIS2_PLACEMENT_3D('',#43354,#43355,#43356); +#43354 = CARTESIAN_POINT('',(8.350000119209,-11.25,0.399998009205)); +#43355 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43356 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43357 = ADVANCED_FACE('',(#43358),#43376,.F.); +#43358 = FACE_BOUND('',#43359,.T.); +#43359 = EDGE_LOOP('',(#43360,#43368,#43369,#43370)); +#43360 = ORIENTED_EDGE('',*,*,#43361,.F.); +#43361 = EDGE_CURVE('',#43277,#43362,#43364,.T.); +#43362 = VERTEX_POINT('',#43363); +#43363 = CARTESIAN_POINT('',(8.15,-11.7,0.4)); +#43364 = LINE('',#43365,#43366); +#43365 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#43366 = VECTOR('',#43367,1.); +#43367 = DIRECTION('',(-0.,-1.,-0.)); +#43368 = ORIENTED_EDGE('',*,*,#43284,.T.); +#43369 = ORIENTED_EDGE('',*,*,#43346,.F.); +#43370 = ORIENTED_EDGE('',*,*,#43371,.F.); +#43371 = EDGE_CURVE('',#43362,#43339,#43372,.T.); +#43372 = LINE('',#43373,#43374); +#43373 = CARTESIAN_POINT('',(8.15,-11.7,0.4)); +#43374 = VECTOR('',#43375,1.); +#43375 = DIRECTION('',(0.,0.,-1.)); +#43376 = PLANE('',#43377); +#43377 = AXIS2_PLACEMENT_3D('',#43378,#43379,#43380); +#43378 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#43379 = DIRECTION('',(1.,0.,0.)); +#43380 = DIRECTION('',(-0.,1.,0.)); +#43381 = ADVANCED_FACE('',(#43382),#43393,.F.); +#43382 = FACE_BOUND('',#43383,.T.); +#43383 = EDGE_LOOP('',(#43384,#43385,#43386,#43392)); +#43384 = ORIENTED_EDGE('',*,*,#43276,.T.); +#43385 = ORIENTED_EDGE('',*,*,#43361,.T.); +#43386 = ORIENTED_EDGE('',*,*,#43387,.F.); +#43387 = EDGE_CURVE('',#43307,#43362,#43388,.T.); +#43388 = LINE('',#43389,#43390); +#43389 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#43390 = VECTOR('',#43391,1.); +#43391 = DIRECTION('',(-1.,-0.,-0.)); +#43392 = ORIENTED_EDGE('',*,*,#43323,.F.); +#43393 = PLANE('',#43394); +#43394 = AXIS2_PLACEMENT_3D('',#43395,#43396,#43397); +#43395 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#43396 = DIRECTION('',(-0.,-0.,-1.)); +#43397 = DIRECTION('',(0.,1.,-0.)); +#43398 = ADVANCED_FACE('',(#43399),#43405,.F.); +#43399 = FACE_BOUND('',#43400,.T.); +#43400 = EDGE_LOOP('',(#43401,#43402,#43403,#43404)); +#43401 = ORIENTED_EDGE('',*,*,#43306,.F.); +#43402 = ORIENTED_EDGE('',*,*,#43387,.T.); +#43403 = ORIENTED_EDGE('',*,*,#43371,.T.); +#43404 = ORIENTED_EDGE('',*,*,#43338,.F.); +#43405 = PLANE('',#43406); +#43406 = AXIS2_PLACEMENT_3D('',#43407,#43408,#43409); +#43407 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#43408 = DIRECTION('',(0.,1.,0.)); +#43409 = DIRECTION('',(0.,-0.,1.)); +#43410 = ORIENTED_CLOSED_SHELL('',*,#43411,.F.); +#43411 = CLOSED_SHELL('',(#43412,#43452,#43483,#43507,#43531,#43548)); +#43412 = ADVANCED_FACE('',(#43413),#43447,.T.); +#43413 = FACE_BOUND('',#43414,.F.); +#43414 = EDGE_LOOP('',(#43415,#43425,#43433,#43441)); +#43415 = ORIENTED_EDGE('',*,*,#43416,.F.); +#43416 = EDGE_CURVE('',#43417,#43419,#43421,.T.); +#43417 = VERTEX_POINT('',#43418); +#43418 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#43419 = VERTEX_POINT('',#43420); +#43420 = CARTESIAN_POINT('',(8.550000119209,-9.53,0.399997961521)); +#43421 = LINE('',#43422,#43423); +#43422 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#43423 = VECTOR('',#43424,1.); +#43424 = DIRECTION('',(0.,0.,-1.)); +#43425 = ORIENTED_EDGE('',*,*,#43426,.T.); +#43426 = EDGE_CURVE('',#43417,#43427,#43429,.T.); +#43427 = VERTEX_POINT('',#43428); +#43428 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#43429 = LINE('',#43430,#43431); +#43430 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#43431 = VECTOR('',#43432,1.); +#43432 = DIRECTION('',(-1.,-0.,-0.)); +#43433 = ORIENTED_EDGE('',*,*,#43434,.T.); +#43434 = EDGE_CURVE('',#43427,#43435,#43437,.T.); +#43435 = VERTEX_POINT('',#43436); +#43436 = CARTESIAN_POINT('',(8.150000119209,-9.53,0.399998056888)); +#43437 = LINE('',#43438,#43439); +#43438 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#43439 = VECTOR('',#43440,1.); +#43440 = DIRECTION('',(0.,0.,-1.)); +#43441 = ORIENTED_EDGE('',*,*,#43442,.T.); +#43442 = EDGE_CURVE('',#43435,#43419,#43443,.T.); +#43443 = LINE('',#43444,#43445); +#43444 = CARTESIAN_POINT('',(8.150000119209,-9.53,0.399998056888)); +#43445 = VECTOR('',#43446,1.); +#43446 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43447 = PLANE('',#43448); +#43448 = AXIS2_PLACEMENT_3D('',#43449,#43450,#43451); +#43449 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#43450 = DIRECTION('',(0.,1.,0.)); +#43451 = DIRECTION('',(0.,-0.,1.)); +#43452 = ADVANCED_FACE('',(#43453),#43478,.T.); +#43453 = FACE_BOUND('',#43454,.T.); +#43454 = EDGE_LOOP('',(#43455,#43465,#43471,#43472)); +#43455 = ORIENTED_EDGE('',*,*,#43456,.T.); +#43456 = EDGE_CURVE('',#43457,#43459,#43461,.T.); +#43457 = VERTEX_POINT('',#43458); +#43458 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#43459 = VERTEX_POINT('',#43460); +#43460 = CARTESIAN_POINT('',(8.550000119209,-10.43,0.399997961521)); +#43461 = LINE('',#43462,#43463); +#43462 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#43463 = VECTOR('',#43464,1.); +#43464 = DIRECTION('',(0.,0.,-1.)); +#43465 = ORIENTED_EDGE('',*,*,#43466,.F.); +#43466 = EDGE_CURVE('',#43419,#43459,#43467,.T.); +#43467 = LINE('',#43468,#43469); +#43468 = CARTESIAN_POINT('',(8.550000119209,-9.53,0.399997961521)); +#43469 = VECTOR('',#43470,1.); +#43470 = DIRECTION('',(0.,-1.,0.)); +#43471 = ORIENTED_EDGE('',*,*,#43416,.F.); +#43472 = ORIENTED_EDGE('',*,*,#43473,.T.); +#43473 = EDGE_CURVE('',#43417,#43457,#43474,.T.); +#43474 = LINE('',#43475,#43476); +#43475 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#43476 = VECTOR('',#43477,1.); +#43477 = DIRECTION('',(-0.,-1.,-0.)); +#43478 = PLANE('',#43479); +#43479 = AXIS2_PLACEMENT_3D('',#43480,#43481,#43482); +#43480 = CARTESIAN_POINT('',(8.550000214576,-9.53,0.799997961521)); +#43481 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43482 = DIRECTION('',(0.,1.,0.)); +#43483 = ADVANCED_FACE('',(#43484),#43502,.F.); +#43484 = FACE_BOUND('',#43485,.T.); +#43485 = EDGE_LOOP('',(#43486,#43487,#43495,#43501)); +#43486 = ORIENTED_EDGE('',*,*,#43466,.T.); +#43487 = ORIENTED_EDGE('',*,*,#43488,.T.); +#43488 = EDGE_CURVE('',#43459,#43489,#43491,.T.); +#43489 = VERTEX_POINT('',#43490); +#43490 = CARTESIAN_POINT('',(8.150000119209,-10.43,0.399998056888)); +#43491 = LINE('',#43492,#43493); +#43492 = CARTESIAN_POINT('',(8.550000119209,-10.43,0.399997961521)); +#43493 = VECTOR('',#43494,1.); +#43494 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43495 = ORIENTED_EDGE('',*,*,#43496,.T.); +#43496 = EDGE_CURVE('',#43489,#43435,#43497,.T.); +#43497 = LINE('',#43498,#43499); +#43498 = CARTESIAN_POINT('',(8.150000119209,-10.43,0.399998056888)); +#43499 = VECTOR('',#43500,1.); +#43500 = DIRECTION('',(0.,1.,0.)); +#43501 = ORIENTED_EDGE('',*,*,#43442,.T.); +#43502 = PLANE('',#43503); +#43503 = AXIS2_PLACEMENT_3D('',#43504,#43505,#43506); +#43504 = CARTESIAN_POINT('',(8.350000119209,-9.98,0.399998009205)); +#43505 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43506 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43507 = ADVANCED_FACE('',(#43508),#43526,.F.); +#43508 = FACE_BOUND('',#43509,.T.); +#43509 = EDGE_LOOP('',(#43510,#43518,#43519,#43520)); +#43510 = ORIENTED_EDGE('',*,*,#43511,.F.); +#43511 = EDGE_CURVE('',#43427,#43512,#43514,.T.); +#43512 = VERTEX_POINT('',#43513); +#43513 = CARTESIAN_POINT('',(8.15,-10.43,0.4)); +#43514 = LINE('',#43515,#43516); +#43515 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#43516 = VECTOR('',#43517,1.); +#43517 = DIRECTION('',(-0.,-1.,-0.)); +#43518 = ORIENTED_EDGE('',*,*,#43434,.T.); +#43519 = ORIENTED_EDGE('',*,*,#43496,.F.); +#43520 = ORIENTED_EDGE('',*,*,#43521,.F.); +#43521 = EDGE_CURVE('',#43512,#43489,#43522,.T.); +#43522 = LINE('',#43523,#43524); +#43523 = CARTESIAN_POINT('',(8.15,-10.43,0.4)); +#43524 = VECTOR('',#43525,1.); +#43525 = DIRECTION('',(0.,0.,-1.)); +#43526 = PLANE('',#43527); +#43527 = AXIS2_PLACEMENT_3D('',#43528,#43529,#43530); +#43528 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#43529 = DIRECTION('',(1.,0.,0.)); +#43530 = DIRECTION('',(-0.,1.,0.)); +#43531 = ADVANCED_FACE('',(#43532),#43543,.F.); +#43532 = FACE_BOUND('',#43533,.T.); +#43533 = EDGE_LOOP('',(#43534,#43535,#43536,#43542)); +#43534 = ORIENTED_EDGE('',*,*,#43426,.T.); +#43535 = ORIENTED_EDGE('',*,*,#43511,.T.); +#43536 = ORIENTED_EDGE('',*,*,#43537,.F.); +#43537 = EDGE_CURVE('',#43457,#43512,#43538,.T.); +#43538 = LINE('',#43539,#43540); +#43539 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#43540 = VECTOR('',#43541,1.); +#43541 = DIRECTION('',(-1.,-0.,-0.)); +#43542 = ORIENTED_EDGE('',*,*,#43473,.F.); +#43543 = PLANE('',#43544); +#43544 = AXIS2_PLACEMENT_3D('',#43545,#43546,#43547); +#43545 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#43546 = DIRECTION('',(-0.,-0.,-1.)); +#43547 = DIRECTION('',(0.,1.,-0.)); +#43548 = ADVANCED_FACE('',(#43549),#43555,.F.); +#43549 = FACE_BOUND('',#43550,.T.); +#43550 = EDGE_LOOP('',(#43551,#43552,#43553,#43554)); +#43551 = ORIENTED_EDGE('',*,*,#43456,.F.); +#43552 = ORIENTED_EDGE('',*,*,#43537,.T.); +#43553 = ORIENTED_EDGE('',*,*,#43521,.T.); +#43554 = ORIENTED_EDGE('',*,*,#43488,.F.); +#43555 = PLANE('',#43556); +#43556 = AXIS2_PLACEMENT_3D('',#43557,#43558,#43559); +#43557 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#43558 = DIRECTION('',(0.,1.,0.)); +#43559 = DIRECTION('',(0.,-0.,1.)); +#43560 = ORIENTED_CLOSED_SHELL('',*,#43561,.F.); +#43561 = CLOSED_SHELL('',(#43562,#43602,#43633,#43657,#43681,#43698)); +#43562 = ADVANCED_FACE('',(#43563),#43597,.T.); +#43563 = FACE_BOUND('',#43564,.F.); +#43564 = EDGE_LOOP('',(#43565,#43575,#43583,#43591)); +#43565 = ORIENTED_EDGE('',*,*,#43566,.F.); +#43566 = EDGE_CURVE('',#43567,#43569,#43571,.T.); +#43567 = VERTEX_POINT('',#43568); +#43568 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#43569 = VERTEX_POINT('',#43570); +#43570 = CARTESIAN_POINT('',(8.550000119209,-8.26,0.399997961521)); +#43571 = LINE('',#43572,#43573); +#43572 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#43573 = VECTOR('',#43574,1.); +#43574 = DIRECTION('',(0.,0.,-1.)); +#43575 = ORIENTED_EDGE('',*,*,#43576,.T.); +#43576 = EDGE_CURVE('',#43567,#43577,#43579,.T.); +#43577 = VERTEX_POINT('',#43578); +#43578 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#43579 = LINE('',#43580,#43581); +#43580 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#43581 = VECTOR('',#43582,1.); +#43582 = DIRECTION('',(-1.,-0.,-0.)); +#43583 = ORIENTED_EDGE('',*,*,#43584,.T.); +#43584 = EDGE_CURVE('',#43577,#43585,#43587,.T.); +#43585 = VERTEX_POINT('',#43586); +#43586 = CARTESIAN_POINT('',(8.150000119209,-8.26,0.399998056888)); +#43587 = LINE('',#43588,#43589); +#43588 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#43589 = VECTOR('',#43590,1.); +#43590 = DIRECTION('',(0.,0.,-1.)); +#43591 = ORIENTED_EDGE('',*,*,#43592,.T.); +#43592 = EDGE_CURVE('',#43585,#43569,#43593,.T.); +#43593 = LINE('',#43594,#43595); +#43594 = CARTESIAN_POINT('',(8.150000119209,-8.26,0.399998056888)); +#43595 = VECTOR('',#43596,1.); +#43596 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43597 = PLANE('',#43598); +#43598 = AXIS2_PLACEMENT_3D('',#43599,#43600,#43601); +#43599 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#43600 = DIRECTION('',(0.,1.,0.)); +#43601 = DIRECTION('',(0.,-0.,1.)); +#43602 = ADVANCED_FACE('',(#43603),#43628,.T.); +#43603 = FACE_BOUND('',#43604,.T.); +#43604 = EDGE_LOOP('',(#43605,#43615,#43621,#43622)); +#43605 = ORIENTED_EDGE('',*,*,#43606,.T.); +#43606 = EDGE_CURVE('',#43607,#43609,#43611,.T.); +#43607 = VERTEX_POINT('',#43608); +#43608 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#43609 = VERTEX_POINT('',#43610); +#43610 = CARTESIAN_POINT('',(8.550000119209,-9.16,0.399997961521)); +#43611 = LINE('',#43612,#43613); +#43612 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#43613 = VECTOR('',#43614,1.); +#43614 = DIRECTION('',(0.,0.,-1.)); +#43615 = ORIENTED_EDGE('',*,*,#43616,.F.); +#43616 = EDGE_CURVE('',#43569,#43609,#43617,.T.); +#43617 = LINE('',#43618,#43619); +#43618 = CARTESIAN_POINT('',(8.550000119209,-8.26,0.399997961521)); +#43619 = VECTOR('',#43620,1.); +#43620 = DIRECTION('',(0.,-1.,0.)); +#43621 = ORIENTED_EDGE('',*,*,#43566,.F.); +#43622 = ORIENTED_EDGE('',*,*,#43623,.T.); +#43623 = EDGE_CURVE('',#43567,#43607,#43624,.T.); +#43624 = LINE('',#43625,#43626); +#43625 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#43626 = VECTOR('',#43627,1.); +#43627 = DIRECTION('',(-0.,-1.,-0.)); +#43628 = PLANE('',#43629); +#43629 = AXIS2_PLACEMENT_3D('',#43630,#43631,#43632); +#43630 = CARTESIAN_POINT('',(8.550000214576,-8.26,0.799997961521)); +#43631 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43632 = DIRECTION('',(0.,1.,0.)); +#43633 = ADVANCED_FACE('',(#43634),#43652,.F.); +#43634 = FACE_BOUND('',#43635,.T.); +#43635 = EDGE_LOOP('',(#43636,#43637,#43645,#43651)); +#43636 = ORIENTED_EDGE('',*,*,#43616,.T.); +#43637 = ORIENTED_EDGE('',*,*,#43638,.T.); +#43638 = EDGE_CURVE('',#43609,#43639,#43641,.T.); +#43639 = VERTEX_POINT('',#43640); +#43640 = CARTESIAN_POINT('',(8.150000119209,-9.16,0.399998056888)); +#43641 = LINE('',#43642,#43643); +#43642 = CARTESIAN_POINT('',(8.550000119209,-9.16,0.399997961521)); +#43643 = VECTOR('',#43644,1.); +#43644 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43645 = ORIENTED_EDGE('',*,*,#43646,.T.); +#43646 = EDGE_CURVE('',#43639,#43585,#43647,.T.); +#43647 = LINE('',#43648,#43649); +#43648 = CARTESIAN_POINT('',(8.150000119209,-9.16,0.399998056888)); +#43649 = VECTOR('',#43650,1.); +#43650 = DIRECTION('',(0.,1.,0.)); +#43651 = ORIENTED_EDGE('',*,*,#43592,.T.); +#43652 = PLANE('',#43653); +#43653 = AXIS2_PLACEMENT_3D('',#43654,#43655,#43656); +#43654 = CARTESIAN_POINT('',(8.350000119209,-8.71,0.399998009205)); +#43655 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43656 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43657 = ADVANCED_FACE('',(#43658),#43676,.F.); +#43658 = FACE_BOUND('',#43659,.T.); +#43659 = EDGE_LOOP('',(#43660,#43668,#43669,#43670)); +#43660 = ORIENTED_EDGE('',*,*,#43661,.F.); +#43661 = EDGE_CURVE('',#43577,#43662,#43664,.T.); +#43662 = VERTEX_POINT('',#43663); +#43663 = CARTESIAN_POINT('',(8.15,-9.16,0.4)); +#43664 = LINE('',#43665,#43666); +#43665 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#43666 = VECTOR('',#43667,1.); +#43667 = DIRECTION('',(-0.,-1.,-0.)); +#43668 = ORIENTED_EDGE('',*,*,#43584,.T.); +#43669 = ORIENTED_EDGE('',*,*,#43646,.F.); +#43670 = ORIENTED_EDGE('',*,*,#43671,.F.); +#43671 = EDGE_CURVE('',#43662,#43639,#43672,.T.); +#43672 = LINE('',#43673,#43674); +#43673 = CARTESIAN_POINT('',(8.15,-9.16,0.4)); +#43674 = VECTOR('',#43675,1.); +#43675 = DIRECTION('',(0.,0.,-1.)); +#43676 = PLANE('',#43677); +#43677 = AXIS2_PLACEMENT_3D('',#43678,#43679,#43680); +#43678 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#43679 = DIRECTION('',(1.,0.,0.)); +#43680 = DIRECTION('',(-0.,1.,0.)); +#43681 = ADVANCED_FACE('',(#43682),#43693,.F.); +#43682 = FACE_BOUND('',#43683,.T.); +#43683 = EDGE_LOOP('',(#43684,#43685,#43686,#43692)); +#43684 = ORIENTED_EDGE('',*,*,#43576,.T.); +#43685 = ORIENTED_EDGE('',*,*,#43661,.T.); +#43686 = ORIENTED_EDGE('',*,*,#43687,.F.); +#43687 = EDGE_CURVE('',#43607,#43662,#43688,.T.); +#43688 = LINE('',#43689,#43690); +#43689 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#43690 = VECTOR('',#43691,1.); +#43691 = DIRECTION('',(-1.,-0.,-0.)); +#43692 = ORIENTED_EDGE('',*,*,#43623,.F.); +#43693 = PLANE('',#43694); +#43694 = AXIS2_PLACEMENT_3D('',#43695,#43696,#43697); +#43695 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#43696 = DIRECTION('',(-0.,-0.,-1.)); +#43697 = DIRECTION('',(0.,1.,-0.)); +#43698 = ADVANCED_FACE('',(#43699),#43705,.F.); +#43699 = FACE_BOUND('',#43700,.T.); +#43700 = EDGE_LOOP('',(#43701,#43702,#43703,#43704)); +#43701 = ORIENTED_EDGE('',*,*,#43606,.F.); +#43702 = ORIENTED_EDGE('',*,*,#43687,.T.); +#43703 = ORIENTED_EDGE('',*,*,#43671,.T.); +#43704 = ORIENTED_EDGE('',*,*,#43638,.F.); +#43705 = PLANE('',#43706); +#43706 = AXIS2_PLACEMENT_3D('',#43707,#43708,#43709); +#43707 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#43708 = DIRECTION('',(0.,1.,0.)); +#43709 = DIRECTION('',(0.,-0.,1.)); +#43710 = ORIENTED_CLOSED_SHELL('',*,#43711,.F.); +#43711 = CLOSED_SHELL('',(#43712,#43752,#43783,#43807,#43831,#43848)); +#43712 = ADVANCED_FACE('',(#43713),#43747,.T.); +#43713 = FACE_BOUND('',#43714,.F.); +#43714 = EDGE_LOOP('',(#43715,#43725,#43733,#43741)); +#43715 = ORIENTED_EDGE('',*,*,#43716,.F.); +#43716 = EDGE_CURVE('',#43717,#43719,#43721,.T.); +#43717 = VERTEX_POINT('',#43718); +#43718 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#43719 = VERTEX_POINT('',#43720); +#43720 = CARTESIAN_POINT('',(8.550000119209,-6.99,0.399997961521)); +#43721 = LINE('',#43722,#43723); +#43722 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#43723 = VECTOR('',#43724,1.); +#43724 = DIRECTION('',(0.,0.,-1.)); +#43725 = ORIENTED_EDGE('',*,*,#43726,.T.); +#43726 = EDGE_CURVE('',#43717,#43727,#43729,.T.); +#43727 = VERTEX_POINT('',#43728); +#43728 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#43729 = LINE('',#43730,#43731); +#43730 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#43731 = VECTOR('',#43732,1.); +#43732 = DIRECTION('',(-1.,-0.,-0.)); +#43733 = ORIENTED_EDGE('',*,*,#43734,.T.); +#43734 = EDGE_CURVE('',#43727,#43735,#43737,.T.); +#43735 = VERTEX_POINT('',#43736); +#43736 = CARTESIAN_POINT('',(8.150000119209,-6.99,0.399998056888)); +#43737 = LINE('',#43738,#43739); +#43738 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#43739 = VECTOR('',#43740,1.); +#43740 = DIRECTION('',(0.,0.,-1.)); +#43741 = ORIENTED_EDGE('',*,*,#43742,.T.); +#43742 = EDGE_CURVE('',#43735,#43719,#43743,.T.); +#43743 = LINE('',#43744,#43745); +#43744 = CARTESIAN_POINT('',(8.150000119209,-6.99,0.399998056888)); +#43745 = VECTOR('',#43746,1.); +#43746 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43747 = PLANE('',#43748); +#43748 = AXIS2_PLACEMENT_3D('',#43749,#43750,#43751); +#43749 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#43750 = DIRECTION('',(0.,1.,0.)); +#43751 = DIRECTION('',(0.,-0.,1.)); +#43752 = ADVANCED_FACE('',(#43753),#43778,.T.); +#43753 = FACE_BOUND('',#43754,.T.); +#43754 = EDGE_LOOP('',(#43755,#43765,#43771,#43772)); +#43755 = ORIENTED_EDGE('',*,*,#43756,.T.); +#43756 = EDGE_CURVE('',#43757,#43759,#43761,.T.); +#43757 = VERTEX_POINT('',#43758); +#43758 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#43759 = VERTEX_POINT('',#43760); +#43760 = CARTESIAN_POINT('',(8.550000119209,-7.89,0.399997961521)); +#43761 = LINE('',#43762,#43763); +#43762 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#43763 = VECTOR('',#43764,1.); +#43764 = DIRECTION('',(0.,0.,-1.)); +#43765 = ORIENTED_EDGE('',*,*,#43766,.F.); +#43766 = EDGE_CURVE('',#43719,#43759,#43767,.T.); +#43767 = LINE('',#43768,#43769); +#43768 = CARTESIAN_POINT('',(8.550000119209,-6.99,0.399997961521)); +#43769 = VECTOR('',#43770,1.); +#43770 = DIRECTION('',(0.,-1.,0.)); +#43771 = ORIENTED_EDGE('',*,*,#43716,.F.); +#43772 = ORIENTED_EDGE('',*,*,#43773,.T.); +#43773 = EDGE_CURVE('',#43717,#43757,#43774,.T.); +#43774 = LINE('',#43775,#43776); +#43775 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#43776 = VECTOR('',#43777,1.); +#43777 = DIRECTION('',(-0.,-1.,-0.)); +#43778 = PLANE('',#43779); +#43779 = AXIS2_PLACEMENT_3D('',#43780,#43781,#43782); +#43780 = CARTESIAN_POINT('',(8.550000214576,-6.99,0.799997961521)); +#43781 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43782 = DIRECTION('',(0.,1.,0.)); +#43783 = ADVANCED_FACE('',(#43784),#43802,.F.); +#43784 = FACE_BOUND('',#43785,.T.); +#43785 = EDGE_LOOP('',(#43786,#43787,#43795,#43801)); +#43786 = ORIENTED_EDGE('',*,*,#43766,.T.); +#43787 = ORIENTED_EDGE('',*,*,#43788,.T.); +#43788 = EDGE_CURVE('',#43759,#43789,#43791,.T.); +#43789 = VERTEX_POINT('',#43790); +#43790 = CARTESIAN_POINT('',(8.150000119209,-7.89,0.399998056888)); +#43791 = LINE('',#43792,#43793); +#43792 = CARTESIAN_POINT('',(8.550000119209,-7.89,0.399997961521)); +#43793 = VECTOR('',#43794,1.); +#43794 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43795 = ORIENTED_EDGE('',*,*,#43796,.T.); +#43796 = EDGE_CURVE('',#43789,#43735,#43797,.T.); +#43797 = LINE('',#43798,#43799); +#43798 = CARTESIAN_POINT('',(8.150000119209,-7.89,0.399998056888)); +#43799 = VECTOR('',#43800,1.); +#43800 = DIRECTION('',(0.,1.,0.)); +#43801 = ORIENTED_EDGE('',*,*,#43742,.T.); +#43802 = PLANE('',#43803); +#43803 = AXIS2_PLACEMENT_3D('',#43804,#43805,#43806); +#43804 = CARTESIAN_POINT('',(8.350000119209,-7.44,0.399998009205)); +#43805 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43806 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43807 = ADVANCED_FACE('',(#43808),#43826,.F.); +#43808 = FACE_BOUND('',#43809,.T.); +#43809 = EDGE_LOOP('',(#43810,#43818,#43819,#43820)); +#43810 = ORIENTED_EDGE('',*,*,#43811,.F.); +#43811 = EDGE_CURVE('',#43727,#43812,#43814,.T.); +#43812 = VERTEX_POINT('',#43813); +#43813 = CARTESIAN_POINT('',(8.15,-7.89,0.4)); +#43814 = LINE('',#43815,#43816); +#43815 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#43816 = VECTOR('',#43817,1.); +#43817 = DIRECTION('',(-0.,-1.,-0.)); +#43818 = ORIENTED_EDGE('',*,*,#43734,.T.); +#43819 = ORIENTED_EDGE('',*,*,#43796,.F.); +#43820 = ORIENTED_EDGE('',*,*,#43821,.F.); +#43821 = EDGE_CURVE('',#43812,#43789,#43822,.T.); +#43822 = LINE('',#43823,#43824); +#43823 = CARTESIAN_POINT('',(8.15,-7.89,0.4)); +#43824 = VECTOR('',#43825,1.); +#43825 = DIRECTION('',(0.,0.,-1.)); +#43826 = PLANE('',#43827); +#43827 = AXIS2_PLACEMENT_3D('',#43828,#43829,#43830); +#43828 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#43829 = DIRECTION('',(1.,0.,0.)); +#43830 = DIRECTION('',(-0.,1.,0.)); +#43831 = ADVANCED_FACE('',(#43832),#43843,.F.); +#43832 = FACE_BOUND('',#43833,.T.); +#43833 = EDGE_LOOP('',(#43834,#43835,#43836,#43842)); +#43834 = ORIENTED_EDGE('',*,*,#43726,.T.); +#43835 = ORIENTED_EDGE('',*,*,#43811,.T.); +#43836 = ORIENTED_EDGE('',*,*,#43837,.F.); +#43837 = EDGE_CURVE('',#43757,#43812,#43838,.T.); +#43838 = LINE('',#43839,#43840); +#43839 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#43840 = VECTOR('',#43841,1.); +#43841 = DIRECTION('',(-1.,-0.,-0.)); +#43842 = ORIENTED_EDGE('',*,*,#43773,.F.); +#43843 = PLANE('',#43844); +#43844 = AXIS2_PLACEMENT_3D('',#43845,#43846,#43847); +#43845 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#43846 = DIRECTION('',(-0.,-0.,-1.)); +#43847 = DIRECTION('',(0.,1.,-0.)); +#43848 = ADVANCED_FACE('',(#43849),#43855,.F.); +#43849 = FACE_BOUND('',#43850,.T.); +#43850 = EDGE_LOOP('',(#43851,#43852,#43853,#43854)); +#43851 = ORIENTED_EDGE('',*,*,#43756,.F.); +#43852 = ORIENTED_EDGE('',*,*,#43837,.T.); +#43853 = ORIENTED_EDGE('',*,*,#43821,.T.); +#43854 = ORIENTED_EDGE('',*,*,#43788,.F.); +#43855 = PLANE('',#43856); +#43856 = AXIS2_PLACEMENT_3D('',#43857,#43858,#43859); +#43857 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#43858 = DIRECTION('',(0.,1.,0.)); +#43859 = DIRECTION('',(0.,-0.,1.)); +#43860 = ORIENTED_CLOSED_SHELL('',*,#43861,.F.); +#43861 = CLOSED_SHELL('',(#43862,#43902,#43933,#43957,#43981,#43998)); +#43862 = ADVANCED_FACE('',(#43863),#43897,.T.); +#43863 = FACE_BOUND('',#43864,.F.); +#43864 = EDGE_LOOP('',(#43865,#43875,#43883,#43891)); +#43865 = ORIENTED_EDGE('',*,*,#43866,.F.); +#43866 = EDGE_CURVE('',#43867,#43869,#43871,.T.); +#43867 = VERTEX_POINT('',#43868); +#43868 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#43869 = VERTEX_POINT('',#43870); +#43870 = CARTESIAN_POINT('',(8.550000119209,-5.72,0.399997961521)); +#43871 = LINE('',#43872,#43873); +#43872 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#43873 = VECTOR('',#43874,1.); +#43874 = DIRECTION('',(0.,0.,-1.)); +#43875 = ORIENTED_EDGE('',*,*,#43876,.T.); +#43876 = EDGE_CURVE('',#43867,#43877,#43879,.T.); +#43877 = VERTEX_POINT('',#43878); +#43878 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#43879 = LINE('',#43880,#43881); +#43880 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#43881 = VECTOR('',#43882,1.); +#43882 = DIRECTION('',(-1.,-0.,-0.)); +#43883 = ORIENTED_EDGE('',*,*,#43884,.T.); +#43884 = EDGE_CURVE('',#43877,#43885,#43887,.T.); +#43885 = VERTEX_POINT('',#43886); +#43886 = CARTESIAN_POINT('',(8.150000119209,-5.72,0.399998056888)); +#43887 = LINE('',#43888,#43889); +#43888 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#43889 = VECTOR('',#43890,1.); +#43890 = DIRECTION('',(0.,0.,-1.)); +#43891 = ORIENTED_EDGE('',*,*,#43892,.T.); +#43892 = EDGE_CURVE('',#43885,#43869,#43893,.T.); +#43893 = LINE('',#43894,#43895); +#43894 = CARTESIAN_POINT('',(8.150000119209,-5.72,0.399998056888)); +#43895 = VECTOR('',#43896,1.); +#43896 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43897 = PLANE('',#43898); +#43898 = AXIS2_PLACEMENT_3D('',#43899,#43900,#43901); +#43899 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#43900 = DIRECTION('',(0.,1.,0.)); +#43901 = DIRECTION('',(0.,-0.,1.)); +#43902 = ADVANCED_FACE('',(#43903),#43928,.T.); +#43903 = FACE_BOUND('',#43904,.T.); +#43904 = EDGE_LOOP('',(#43905,#43915,#43921,#43922)); +#43905 = ORIENTED_EDGE('',*,*,#43906,.T.); +#43906 = EDGE_CURVE('',#43907,#43909,#43911,.T.); +#43907 = VERTEX_POINT('',#43908); +#43908 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#43909 = VERTEX_POINT('',#43910); +#43910 = CARTESIAN_POINT('',(8.550000119209,-6.62,0.399997961521)); +#43911 = LINE('',#43912,#43913); +#43912 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#43913 = VECTOR('',#43914,1.); +#43914 = DIRECTION('',(0.,0.,-1.)); +#43915 = ORIENTED_EDGE('',*,*,#43916,.F.); +#43916 = EDGE_CURVE('',#43869,#43909,#43917,.T.); +#43917 = LINE('',#43918,#43919); +#43918 = CARTESIAN_POINT('',(8.550000119209,-5.72,0.399997961521)); +#43919 = VECTOR('',#43920,1.); +#43920 = DIRECTION('',(0.,-1.,0.)); +#43921 = ORIENTED_EDGE('',*,*,#43866,.F.); +#43922 = ORIENTED_EDGE('',*,*,#43923,.T.); +#43923 = EDGE_CURVE('',#43867,#43907,#43924,.T.); +#43924 = LINE('',#43925,#43926); +#43925 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#43926 = VECTOR('',#43927,1.); +#43927 = DIRECTION('',(-0.,-1.,-0.)); +#43928 = PLANE('',#43929); +#43929 = AXIS2_PLACEMENT_3D('',#43930,#43931,#43932); +#43930 = CARTESIAN_POINT('',(8.550000214576,-5.72,0.799997961521)); +#43931 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43932 = DIRECTION('',(0.,1.,0.)); +#43933 = ADVANCED_FACE('',(#43934),#43952,.F.); +#43934 = FACE_BOUND('',#43935,.T.); +#43935 = EDGE_LOOP('',(#43936,#43937,#43945,#43951)); +#43936 = ORIENTED_EDGE('',*,*,#43916,.T.); +#43937 = ORIENTED_EDGE('',*,*,#43938,.T.); +#43938 = EDGE_CURVE('',#43909,#43939,#43941,.T.); +#43939 = VERTEX_POINT('',#43940); +#43940 = CARTESIAN_POINT('',(8.150000119209,-6.62,0.399998056888)); +#43941 = LINE('',#43942,#43943); +#43942 = CARTESIAN_POINT('',(8.550000119209,-6.62,0.399997961521)); +#43943 = VECTOR('',#43944,1.); +#43944 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#43945 = ORIENTED_EDGE('',*,*,#43946,.T.); +#43946 = EDGE_CURVE('',#43939,#43885,#43947,.T.); +#43947 = LINE('',#43948,#43949); +#43948 = CARTESIAN_POINT('',(8.150000119209,-6.62,0.399998056888)); +#43949 = VECTOR('',#43950,1.); +#43950 = DIRECTION('',(0.,1.,0.)); +#43951 = ORIENTED_EDGE('',*,*,#43892,.T.); +#43952 = PLANE('',#43953); +#43953 = AXIS2_PLACEMENT_3D('',#43954,#43955,#43956); +#43954 = CARTESIAN_POINT('',(8.350000119209,-6.17,0.399998009205)); +#43955 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#43956 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#43957 = ADVANCED_FACE('',(#43958),#43976,.F.); +#43958 = FACE_BOUND('',#43959,.T.); +#43959 = EDGE_LOOP('',(#43960,#43968,#43969,#43970)); +#43960 = ORIENTED_EDGE('',*,*,#43961,.F.); +#43961 = EDGE_CURVE('',#43877,#43962,#43964,.T.); +#43962 = VERTEX_POINT('',#43963); +#43963 = CARTESIAN_POINT('',(8.15,-6.62,0.4)); +#43964 = LINE('',#43965,#43966); +#43965 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#43966 = VECTOR('',#43967,1.); +#43967 = DIRECTION('',(-0.,-1.,-0.)); +#43968 = ORIENTED_EDGE('',*,*,#43884,.T.); +#43969 = ORIENTED_EDGE('',*,*,#43946,.F.); +#43970 = ORIENTED_EDGE('',*,*,#43971,.F.); +#43971 = EDGE_CURVE('',#43962,#43939,#43972,.T.); +#43972 = LINE('',#43973,#43974); +#43973 = CARTESIAN_POINT('',(8.15,-6.62,0.4)); +#43974 = VECTOR('',#43975,1.); +#43975 = DIRECTION('',(0.,0.,-1.)); +#43976 = PLANE('',#43977); +#43977 = AXIS2_PLACEMENT_3D('',#43978,#43979,#43980); +#43978 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#43979 = DIRECTION('',(1.,0.,0.)); +#43980 = DIRECTION('',(-0.,1.,0.)); +#43981 = ADVANCED_FACE('',(#43982),#43993,.F.); +#43982 = FACE_BOUND('',#43983,.T.); +#43983 = EDGE_LOOP('',(#43984,#43985,#43986,#43992)); +#43984 = ORIENTED_EDGE('',*,*,#43876,.T.); +#43985 = ORIENTED_EDGE('',*,*,#43961,.T.); +#43986 = ORIENTED_EDGE('',*,*,#43987,.F.); +#43987 = EDGE_CURVE('',#43907,#43962,#43988,.T.); +#43988 = LINE('',#43989,#43990); +#43989 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#43990 = VECTOR('',#43991,1.); +#43991 = DIRECTION('',(-1.,-0.,-0.)); +#43992 = ORIENTED_EDGE('',*,*,#43923,.F.); +#43993 = PLANE('',#43994); +#43994 = AXIS2_PLACEMENT_3D('',#43995,#43996,#43997); +#43995 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#43996 = DIRECTION('',(-0.,-0.,-1.)); +#43997 = DIRECTION('',(0.,1.,-0.)); +#43998 = ADVANCED_FACE('',(#43999),#44005,.F.); +#43999 = FACE_BOUND('',#44000,.T.); +#44000 = EDGE_LOOP('',(#44001,#44002,#44003,#44004)); +#44001 = ORIENTED_EDGE('',*,*,#43906,.F.); +#44002 = ORIENTED_EDGE('',*,*,#43987,.T.); +#44003 = ORIENTED_EDGE('',*,*,#43971,.T.); +#44004 = ORIENTED_EDGE('',*,*,#43938,.F.); +#44005 = PLANE('',#44006); +#44006 = AXIS2_PLACEMENT_3D('',#44007,#44008,#44009); +#44007 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#44008 = DIRECTION('',(0.,1.,0.)); +#44009 = DIRECTION('',(0.,-0.,1.)); +#44010 = ORIENTED_CLOSED_SHELL('',*,#44011,.F.); +#44011 = CLOSED_SHELL('',(#44012,#44052,#44083,#44107,#44131,#44148)); +#44012 = ADVANCED_FACE('',(#44013),#44047,.T.); +#44013 = FACE_BOUND('',#44014,.F.); +#44014 = EDGE_LOOP('',(#44015,#44025,#44033,#44041)); +#44015 = ORIENTED_EDGE('',*,*,#44016,.F.); +#44016 = EDGE_CURVE('',#44017,#44019,#44021,.T.); +#44017 = VERTEX_POINT('',#44018); +#44018 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#44019 = VERTEX_POINT('',#44020); +#44020 = CARTESIAN_POINT('',(8.550000119209,-4.45,0.399997961521)); +#44021 = LINE('',#44022,#44023); +#44022 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#44023 = VECTOR('',#44024,1.); +#44024 = DIRECTION('',(0.,0.,-1.)); +#44025 = ORIENTED_EDGE('',*,*,#44026,.T.); +#44026 = EDGE_CURVE('',#44017,#44027,#44029,.T.); +#44027 = VERTEX_POINT('',#44028); +#44028 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#44029 = LINE('',#44030,#44031); +#44030 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#44031 = VECTOR('',#44032,1.); +#44032 = DIRECTION('',(-1.,-0.,-0.)); +#44033 = ORIENTED_EDGE('',*,*,#44034,.T.); +#44034 = EDGE_CURVE('',#44027,#44035,#44037,.T.); +#44035 = VERTEX_POINT('',#44036); +#44036 = CARTESIAN_POINT('',(8.150000119209,-4.45,0.399998056888)); +#44037 = LINE('',#44038,#44039); +#44038 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#44039 = VECTOR('',#44040,1.); +#44040 = DIRECTION('',(0.,0.,-1.)); +#44041 = ORIENTED_EDGE('',*,*,#44042,.T.); +#44042 = EDGE_CURVE('',#44035,#44019,#44043,.T.); +#44043 = LINE('',#44044,#44045); +#44044 = CARTESIAN_POINT('',(8.150000119209,-4.45,0.399998056888)); +#44045 = VECTOR('',#44046,1.); +#44046 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44047 = PLANE('',#44048); +#44048 = AXIS2_PLACEMENT_3D('',#44049,#44050,#44051); +#44049 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#44050 = DIRECTION('',(0.,1.,0.)); +#44051 = DIRECTION('',(0.,-0.,1.)); +#44052 = ADVANCED_FACE('',(#44053),#44078,.T.); +#44053 = FACE_BOUND('',#44054,.T.); +#44054 = EDGE_LOOP('',(#44055,#44065,#44071,#44072)); +#44055 = ORIENTED_EDGE('',*,*,#44056,.T.); +#44056 = EDGE_CURVE('',#44057,#44059,#44061,.T.); +#44057 = VERTEX_POINT('',#44058); +#44058 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#44059 = VERTEX_POINT('',#44060); +#44060 = CARTESIAN_POINT('',(8.550000119209,-5.35,0.399997961521)); +#44061 = LINE('',#44062,#44063); +#44062 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#44063 = VECTOR('',#44064,1.); +#44064 = DIRECTION('',(0.,0.,-1.)); +#44065 = ORIENTED_EDGE('',*,*,#44066,.F.); +#44066 = EDGE_CURVE('',#44019,#44059,#44067,.T.); +#44067 = LINE('',#44068,#44069); +#44068 = CARTESIAN_POINT('',(8.550000119209,-4.45,0.399997961521)); +#44069 = VECTOR('',#44070,1.); +#44070 = DIRECTION('',(0.,-1.,0.)); +#44071 = ORIENTED_EDGE('',*,*,#44016,.F.); +#44072 = ORIENTED_EDGE('',*,*,#44073,.T.); +#44073 = EDGE_CURVE('',#44017,#44057,#44074,.T.); +#44074 = LINE('',#44075,#44076); +#44075 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#44076 = VECTOR('',#44077,1.); +#44077 = DIRECTION('',(-0.,-1.,-0.)); +#44078 = PLANE('',#44079); +#44079 = AXIS2_PLACEMENT_3D('',#44080,#44081,#44082); +#44080 = CARTESIAN_POINT('',(8.550000214576,-4.45,0.799997961521)); +#44081 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44082 = DIRECTION('',(0.,1.,0.)); +#44083 = ADVANCED_FACE('',(#44084),#44102,.F.); +#44084 = FACE_BOUND('',#44085,.T.); +#44085 = EDGE_LOOP('',(#44086,#44087,#44095,#44101)); +#44086 = ORIENTED_EDGE('',*,*,#44066,.T.); +#44087 = ORIENTED_EDGE('',*,*,#44088,.T.); +#44088 = EDGE_CURVE('',#44059,#44089,#44091,.T.); +#44089 = VERTEX_POINT('',#44090); +#44090 = CARTESIAN_POINT('',(8.150000119209,-5.35,0.399998056888)); +#44091 = LINE('',#44092,#44093); +#44092 = CARTESIAN_POINT('',(8.550000119209,-5.35,0.399997961521)); +#44093 = VECTOR('',#44094,1.); +#44094 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#44095 = ORIENTED_EDGE('',*,*,#44096,.T.); +#44096 = EDGE_CURVE('',#44089,#44035,#44097,.T.); +#44097 = LINE('',#44098,#44099); +#44098 = CARTESIAN_POINT('',(8.150000119209,-5.35,0.399998056888)); +#44099 = VECTOR('',#44100,1.); +#44100 = DIRECTION('',(0.,1.,0.)); +#44101 = ORIENTED_EDGE('',*,*,#44042,.T.); +#44102 = PLANE('',#44103); +#44103 = AXIS2_PLACEMENT_3D('',#44104,#44105,#44106); +#44104 = CARTESIAN_POINT('',(8.350000119209,-4.9,0.399998009205)); +#44105 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#44106 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44107 = ADVANCED_FACE('',(#44108),#44126,.F.); +#44108 = FACE_BOUND('',#44109,.T.); +#44109 = EDGE_LOOP('',(#44110,#44118,#44119,#44120)); +#44110 = ORIENTED_EDGE('',*,*,#44111,.F.); +#44111 = EDGE_CURVE('',#44027,#44112,#44114,.T.); +#44112 = VERTEX_POINT('',#44113); +#44113 = CARTESIAN_POINT('',(8.15,-5.35,0.4)); +#44114 = LINE('',#44115,#44116); +#44115 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#44116 = VECTOR('',#44117,1.); +#44117 = DIRECTION('',(-0.,-1.,-0.)); +#44118 = ORIENTED_EDGE('',*,*,#44034,.T.); +#44119 = ORIENTED_EDGE('',*,*,#44096,.F.); +#44120 = ORIENTED_EDGE('',*,*,#44121,.F.); +#44121 = EDGE_CURVE('',#44112,#44089,#44122,.T.); +#44122 = LINE('',#44123,#44124); +#44123 = CARTESIAN_POINT('',(8.15,-5.35,0.4)); +#44124 = VECTOR('',#44125,1.); +#44125 = DIRECTION('',(0.,0.,-1.)); +#44126 = PLANE('',#44127); +#44127 = AXIS2_PLACEMENT_3D('',#44128,#44129,#44130); +#44128 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#44129 = DIRECTION('',(1.,0.,0.)); +#44130 = DIRECTION('',(-0.,1.,0.)); +#44131 = ADVANCED_FACE('',(#44132),#44143,.F.); +#44132 = FACE_BOUND('',#44133,.T.); +#44133 = EDGE_LOOP('',(#44134,#44135,#44136,#44142)); +#44134 = ORIENTED_EDGE('',*,*,#44026,.T.); +#44135 = ORIENTED_EDGE('',*,*,#44111,.T.); +#44136 = ORIENTED_EDGE('',*,*,#44137,.F.); +#44137 = EDGE_CURVE('',#44057,#44112,#44138,.T.); +#44138 = LINE('',#44139,#44140); +#44139 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#44140 = VECTOR('',#44141,1.); +#44141 = DIRECTION('',(-1.,-0.,-0.)); +#44142 = ORIENTED_EDGE('',*,*,#44073,.F.); +#44143 = PLANE('',#44144); +#44144 = AXIS2_PLACEMENT_3D('',#44145,#44146,#44147); +#44145 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#44146 = DIRECTION('',(-0.,-0.,-1.)); +#44147 = DIRECTION('',(0.,1.,-0.)); +#44148 = ADVANCED_FACE('',(#44149),#44155,.F.); +#44149 = FACE_BOUND('',#44150,.T.); +#44150 = EDGE_LOOP('',(#44151,#44152,#44153,#44154)); +#44151 = ORIENTED_EDGE('',*,*,#44056,.F.); +#44152 = ORIENTED_EDGE('',*,*,#44137,.T.); +#44153 = ORIENTED_EDGE('',*,*,#44121,.T.); +#44154 = ORIENTED_EDGE('',*,*,#44088,.F.); +#44155 = PLANE('',#44156); +#44156 = AXIS2_PLACEMENT_3D('',#44157,#44158,#44159); +#44157 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#44158 = DIRECTION('',(0.,1.,0.)); +#44159 = DIRECTION('',(0.,-0.,1.)); +#44160 = ORIENTED_CLOSED_SHELL('',*,#44161,.F.); +#44161 = CLOSED_SHELL('',(#44162,#44202,#44233,#44257,#44281,#44298)); +#44162 = ADVANCED_FACE('',(#44163),#44197,.T.); +#44163 = FACE_BOUND('',#44164,.F.); +#44164 = EDGE_LOOP('',(#44165,#44175,#44183,#44191)); +#44165 = ORIENTED_EDGE('',*,*,#44166,.F.); +#44166 = EDGE_CURVE('',#44167,#44169,#44171,.T.); +#44167 = VERTEX_POINT('',#44168); +#44168 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#44169 = VERTEX_POINT('',#44170); +#44170 = CARTESIAN_POINT('',(8.550000119209,-3.18,0.399997961521)); +#44171 = LINE('',#44172,#44173); +#44172 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#44173 = VECTOR('',#44174,1.); +#44174 = DIRECTION('',(0.,0.,-1.)); +#44175 = ORIENTED_EDGE('',*,*,#44176,.T.); +#44176 = EDGE_CURVE('',#44167,#44177,#44179,.T.); +#44177 = VERTEX_POINT('',#44178); +#44178 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#44179 = LINE('',#44180,#44181); +#44180 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#44181 = VECTOR('',#44182,1.); +#44182 = DIRECTION('',(-1.,-0.,-0.)); +#44183 = ORIENTED_EDGE('',*,*,#44184,.T.); +#44184 = EDGE_CURVE('',#44177,#44185,#44187,.T.); +#44185 = VERTEX_POINT('',#44186); +#44186 = CARTESIAN_POINT('',(8.150000119209,-3.18,0.399998056888)); +#44187 = LINE('',#44188,#44189); +#44188 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#44189 = VECTOR('',#44190,1.); +#44190 = DIRECTION('',(0.,0.,-1.)); +#44191 = ORIENTED_EDGE('',*,*,#44192,.T.); +#44192 = EDGE_CURVE('',#44185,#44169,#44193,.T.); +#44193 = LINE('',#44194,#44195); +#44194 = CARTESIAN_POINT('',(8.150000119209,-3.18,0.399998056888)); +#44195 = VECTOR('',#44196,1.); +#44196 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44197 = PLANE('',#44198); +#44198 = AXIS2_PLACEMENT_3D('',#44199,#44200,#44201); +#44199 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#44200 = DIRECTION('',(0.,1.,0.)); +#44201 = DIRECTION('',(0.,-0.,1.)); +#44202 = ADVANCED_FACE('',(#44203),#44228,.T.); +#44203 = FACE_BOUND('',#44204,.T.); +#44204 = EDGE_LOOP('',(#44205,#44215,#44221,#44222)); +#44205 = ORIENTED_EDGE('',*,*,#44206,.T.); +#44206 = EDGE_CURVE('',#44207,#44209,#44211,.T.); +#44207 = VERTEX_POINT('',#44208); +#44208 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#44209 = VERTEX_POINT('',#44210); +#44210 = CARTESIAN_POINT('',(8.550000119209,-4.08,0.399997961521)); +#44211 = LINE('',#44212,#44213); +#44212 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#44213 = VECTOR('',#44214,1.); +#44214 = DIRECTION('',(0.,0.,-1.)); +#44215 = ORIENTED_EDGE('',*,*,#44216,.F.); +#44216 = EDGE_CURVE('',#44169,#44209,#44217,.T.); +#44217 = LINE('',#44218,#44219); +#44218 = CARTESIAN_POINT('',(8.550000119209,-3.18,0.399997961521)); +#44219 = VECTOR('',#44220,1.); +#44220 = DIRECTION('',(0.,-1.,0.)); +#44221 = ORIENTED_EDGE('',*,*,#44166,.F.); +#44222 = ORIENTED_EDGE('',*,*,#44223,.T.); +#44223 = EDGE_CURVE('',#44167,#44207,#44224,.T.); +#44224 = LINE('',#44225,#44226); +#44225 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#44226 = VECTOR('',#44227,1.); +#44227 = DIRECTION('',(-0.,-1.,-0.)); +#44228 = PLANE('',#44229); +#44229 = AXIS2_PLACEMENT_3D('',#44230,#44231,#44232); +#44230 = CARTESIAN_POINT('',(8.550000214576,-3.18,0.799997961521)); +#44231 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44232 = DIRECTION('',(0.,1.,0.)); +#44233 = ADVANCED_FACE('',(#44234),#44252,.F.); +#44234 = FACE_BOUND('',#44235,.T.); +#44235 = EDGE_LOOP('',(#44236,#44237,#44245,#44251)); +#44236 = ORIENTED_EDGE('',*,*,#44216,.T.); +#44237 = ORIENTED_EDGE('',*,*,#44238,.T.); +#44238 = EDGE_CURVE('',#44209,#44239,#44241,.T.); +#44239 = VERTEX_POINT('',#44240); +#44240 = CARTESIAN_POINT('',(8.150000119209,-4.08,0.399998056888)); +#44241 = LINE('',#44242,#44243); +#44242 = CARTESIAN_POINT('',(8.550000119209,-4.08,0.399997961521)); +#44243 = VECTOR('',#44244,1.); +#44244 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#44245 = ORIENTED_EDGE('',*,*,#44246,.T.); +#44246 = EDGE_CURVE('',#44239,#44185,#44247,.T.); +#44247 = LINE('',#44248,#44249); +#44248 = CARTESIAN_POINT('',(8.150000119209,-4.08,0.399998056888)); +#44249 = VECTOR('',#44250,1.); +#44250 = DIRECTION('',(0.,1.,0.)); +#44251 = ORIENTED_EDGE('',*,*,#44192,.T.); +#44252 = PLANE('',#44253); +#44253 = AXIS2_PLACEMENT_3D('',#44254,#44255,#44256); +#44254 = CARTESIAN_POINT('',(8.350000119209,-3.63,0.399998009205)); +#44255 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#44256 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44257 = ADVANCED_FACE('',(#44258),#44276,.F.); +#44258 = FACE_BOUND('',#44259,.T.); +#44259 = EDGE_LOOP('',(#44260,#44268,#44269,#44270)); +#44260 = ORIENTED_EDGE('',*,*,#44261,.F.); +#44261 = EDGE_CURVE('',#44177,#44262,#44264,.T.); +#44262 = VERTEX_POINT('',#44263); +#44263 = CARTESIAN_POINT('',(8.15,-4.08,0.4)); +#44264 = LINE('',#44265,#44266); +#44265 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#44266 = VECTOR('',#44267,1.); +#44267 = DIRECTION('',(-0.,-1.,-0.)); +#44268 = ORIENTED_EDGE('',*,*,#44184,.T.); +#44269 = ORIENTED_EDGE('',*,*,#44246,.F.); +#44270 = ORIENTED_EDGE('',*,*,#44271,.F.); +#44271 = EDGE_CURVE('',#44262,#44239,#44272,.T.); +#44272 = LINE('',#44273,#44274); +#44273 = CARTESIAN_POINT('',(8.15,-4.08,0.4)); +#44274 = VECTOR('',#44275,1.); +#44275 = DIRECTION('',(0.,0.,-1.)); +#44276 = PLANE('',#44277); +#44277 = AXIS2_PLACEMENT_3D('',#44278,#44279,#44280); +#44278 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#44279 = DIRECTION('',(1.,0.,0.)); +#44280 = DIRECTION('',(-0.,1.,0.)); +#44281 = ADVANCED_FACE('',(#44282),#44293,.F.); +#44282 = FACE_BOUND('',#44283,.T.); +#44283 = EDGE_LOOP('',(#44284,#44285,#44286,#44292)); +#44284 = ORIENTED_EDGE('',*,*,#44176,.T.); +#44285 = ORIENTED_EDGE('',*,*,#44261,.T.); +#44286 = ORIENTED_EDGE('',*,*,#44287,.F.); +#44287 = EDGE_CURVE('',#44207,#44262,#44288,.T.); +#44288 = LINE('',#44289,#44290); +#44289 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#44290 = VECTOR('',#44291,1.); +#44291 = DIRECTION('',(-1.,-0.,-0.)); +#44292 = ORIENTED_EDGE('',*,*,#44223,.F.); +#44293 = PLANE('',#44294); +#44294 = AXIS2_PLACEMENT_3D('',#44295,#44296,#44297); +#44295 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#44296 = DIRECTION('',(-0.,-0.,-1.)); +#44297 = DIRECTION('',(0.,1.,-0.)); +#44298 = ADVANCED_FACE('',(#44299),#44305,.F.); +#44299 = FACE_BOUND('',#44300,.T.); +#44300 = EDGE_LOOP('',(#44301,#44302,#44303,#44304)); +#44301 = ORIENTED_EDGE('',*,*,#44206,.F.); +#44302 = ORIENTED_EDGE('',*,*,#44287,.T.); +#44303 = ORIENTED_EDGE('',*,*,#44271,.T.); +#44304 = ORIENTED_EDGE('',*,*,#44238,.F.); +#44305 = PLANE('',#44306); +#44306 = AXIS2_PLACEMENT_3D('',#44307,#44308,#44309); +#44307 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#44308 = DIRECTION('',(0.,1.,0.)); +#44309 = DIRECTION('',(0.,-0.,1.)); +#44310 = ORIENTED_CLOSED_SHELL('',*,#44311,.F.); +#44311 = CLOSED_SHELL('',(#44312,#44352,#44383,#44407,#44431,#44448)); +#44312 = ADVANCED_FACE('',(#44313),#44347,.T.); +#44313 = FACE_BOUND('',#44314,.F.); +#44314 = EDGE_LOOP('',(#44315,#44325,#44333,#44341)); +#44315 = ORIENTED_EDGE('',*,*,#44316,.F.); +#44316 = EDGE_CURVE('',#44317,#44319,#44321,.T.); +#44317 = VERTEX_POINT('',#44318); +#44318 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#44319 = VERTEX_POINT('',#44320); +#44320 = CARTESIAN_POINT('',(8.550000119209,-1.91,0.399997961521)); +#44321 = LINE('',#44322,#44323); +#44322 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#44323 = VECTOR('',#44324,1.); +#44324 = DIRECTION('',(0.,0.,-1.)); +#44325 = ORIENTED_EDGE('',*,*,#44326,.T.); +#44326 = EDGE_CURVE('',#44317,#44327,#44329,.T.); +#44327 = VERTEX_POINT('',#44328); +#44328 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#44329 = LINE('',#44330,#44331); +#44330 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#44331 = VECTOR('',#44332,1.); +#44332 = DIRECTION('',(-1.,-0.,-0.)); +#44333 = ORIENTED_EDGE('',*,*,#44334,.T.); +#44334 = EDGE_CURVE('',#44327,#44335,#44337,.T.); +#44335 = VERTEX_POINT('',#44336); +#44336 = CARTESIAN_POINT('',(8.150000119209,-1.91,0.399998056888)); +#44337 = LINE('',#44338,#44339); +#44338 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#44339 = VECTOR('',#44340,1.); +#44340 = DIRECTION('',(0.,0.,-1.)); +#44341 = ORIENTED_EDGE('',*,*,#44342,.T.); +#44342 = EDGE_CURVE('',#44335,#44319,#44343,.T.); +#44343 = LINE('',#44344,#44345); +#44344 = CARTESIAN_POINT('',(8.150000119209,-1.91,0.399998056888)); +#44345 = VECTOR('',#44346,1.); +#44346 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44347 = PLANE('',#44348); +#44348 = AXIS2_PLACEMENT_3D('',#44349,#44350,#44351); +#44349 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#44350 = DIRECTION('',(0.,1.,0.)); +#44351 = DIRECTION('',(0.,-0.,1.)); +#44352 = ADVANCED_FACE('',(#44353),#44378,.T.); +#44353 = FACE_BOUND('',#44354,.T.); +#44354 = EDGE_LOOP('',(#44355,#44365,#44371,#44372)); +#44355 = ORIENTED_EDGE('',*,*,#44356,.T.); +#44356 = EDGE_CURVE('',#44357,#44359,#44361,.T.); +#44357 = VERTEX_POINT('',#44358); +#44358 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#44359 = VERTEX_POINT('',#44360); +#44360 = CARTESIAN_POINT('',(8.550000119209,-2.81,0.399997961521)); +#44361 = LINE('',#44362,#44363); +#44362 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#44363 = VECTOR('',#44364,1.); +#44364 = DIRECTION('',(0.,0.,-1.)); +#44365 = ORIENTED_EDGE('',*,*,#44366,.F.); +#44366 = EDGE_CURVE('',#44319,#44359,#44367,.T.); +#44367 = LINE('',#44368,#44369); +#44368 = CARTESIAN_POINT('',(8.550000119209,-1.91,0.399997961521)); +#44369 = VECTOR('',#44370,1.); +#44370 = DIRECTION('',(0.,-1.,0.)); +#44371 = ORIENTED_EDGE('',*,*,#44316,.F.); +#44372 = ORIENTED_EDGE('',*,*,#44373,.T.); +#44373 = EDGE_CURVE('',#44317,#44357,#44374,.T.); +#44374 = LINE('',#44375,#44376); +#44375 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#44376 = VECTOR('',#44377,1.); +#44377 = DIRECTION('',(-0.,-1.,-0.)); +#44378 = PLANE('',#44379); +#44379 = AXIS2_PLACEMENT_3D('',#44380,#44381,#44382); +#44380 = CARTESIAN_POINT('',(8.550000214576,-1.91,0.799997961521)); +#44381 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44382 = DIRECTION('',(0.,1.,0.)); +#44383 = ADVANCED_FACE('',(#44384),#44402,.F.); +#44384 = FACE_BOUND('',#44385,.T.); +#44385 = EDGE_LOOP('',(#44386,#44387,#44395,#44401)); +#44386 = ORIENTED_EDGE('',*,*,#44366,.T.); +#44387 = ORIENTED_EDGE('',*,*,#44388,.T.); +#44388 = EDGE_CURVE('',#44359,#44389,#44391,.T.); +#44389 = VERTEX_POINT('',#44390); +#44390 = CARTESIAN_POINT('',(8.150000119209,-2.81,0.399998056888)); +#44391 = LINE('',#44392,#44393); +#44392 = CARTESIAN_POINT('',(8.550000119209,-2.81,0.399997961521)); +#44393 = VECTOR('',#44394,1.); +#44394 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#44395 = ORIENTED_EDGE('',*,*,#44396,.T.); +#44396 = EDGE_CURVE('',#44389,#44335,#44397,.T.); +#44397 = LINE('',#44398,#44399); +#44398 = CARTESIAN_POINT('',(8.150000119209,-2.81,0.399998056888)); +#44399 = VECTOR('',#44400,1.); +#44400 = DIRECTION('',(0.,1.,0.)); +#44401 = ORIENTED_EDGE('',*,*,#44342,.T.); +#44402 = PLANE('',#44403); +#44403 = AXIS2_PLACEMENT_3D('',#44404,#44405,#44406); +#44404 = CARTESIAN_POINT('',(8.350000119209,-2.36,0.399998009205)); +#44405 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#44406 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44407 = ADVANCED_FACE('',(#44408),#44426,.F.); +#44408 = FACE_BOUND('',#44409,.T.); +#44409 = EDGE_LOOP('',(#44410,#44418,#44419,#44420)); +#44410 = ORIENTED_EDGE('',*,*,#44411,.F.); +#44411 = EDGE_CURVE('',#44327,#44412,#44414,.T.); +#44412 = VERTEX_POINT('',#44413); +#44413 = CARTESIAN_POINT('',(8.15,-2.81,0.4)); +#44414 = LINE('',#44415,#44416); +#44415 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#44416 = VECTOR('',#44417,1.); +#44417 = DIRECTION('',(-0.,-1.,-0.)); +#44418 = ORIENTED_EDGE('',*,*,#44334,.T.); +#44419 = ORIENTED_EDGE('',*,*,#44396,.F.); +#44420 = ORIENTED_EDGE('',*,*,#44421,.F.); +#44421 = EDGE_CURVE('',#44412,#44389,#44422,.T.); +#44422 = LINE('',#44423,#44424); +#44423 = CARTESIAN_POINT('',(8.15,-2.81,0.4)); +#44424 = VECTOR('',#44425,1.); +#44425 = DIRECTION('',(0.,0.,-1.)); +#44426 = PLANE('',#44427); +#44427 = AXIS2_PLACEMENT_3D('',#44428,#44429,#44430); +#44428 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#44429 = DIRECTION('',(1.,0.,0.)); +#44430 = DIRECTION('',(-0.,1.,0.)); +#44431 = ADVANCED_FACE('',(#44432),#44443,.F.); +#44432 = FACE_BOUND('',#44433,.T.); +#44433 = EDGE_LOOP('',(#44434,#44435,#44436,#44442)); +#44434 = ORIENTED_EDGE('',*,*,#44326,.T.); +#44435 = ORIENTED_EDGE('',*,*,#44411,.T.); +#44436 = ORIENTED_EDGE('',*,*,#44437,.F.); +#44437 = EDGE_CURVE('',#44357,#44412,#44438,.T.); +#44438 = LINE('',#44439,#44440); +#44439 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#44440 = VECTOR('',#44441,1.); +#44441 = DIRECTION('',(-1.,-0.,-0.)); +#44442 = ORIENTED_EDGE('',*,*,#44373,.F.); +#44443 = PLANE('',#44444); +#44444 = AXIS2_PLACEMENT_3D('',#44445,#44446,#44447); +#44445 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#44446 = DIRECTION('',(-0.,-0.,-1.)); +#44447 = DIRECTION('',(0.,1.,-0.)); +#44448 = ADVANCED_FACE('',(#44449),#44455,.F.); +#44449 = FACE_BOUND('',#44450,.T.); +#44450 = EDGE_LOOP('',(#44451,#44452,#44453,#44454)); +#44451 = ORIENTED_EDGE('',*,*,#44356,.F.); +#44452 = ORIENTED_EDGE('',*,*,#44437,.T.); +#44453 = ORIENTED_EDGE('',*,*,#44421,.T.); +#44454 = ORIENTED_EDGE('',*,*,#44388,.F.); +#44455 = PLANE('',#44456); +#44456 = AXIS2_PLACEMENT_3D('',#44457,#44458,#44459); +#44457 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#44458 = DIRECTION('',(0.,1.,0.)); +#44459 = DIRECTION('',(0.,-0.,1.)); +#44460 = ORIENTED_CLOSED_SHELL('',*,#44461,.F.); +#44461 = CLOSED_SHELL('',(#44462,#44502,#44533,#44557,#44581,#44598)); +#44462 = ADVANCED_FACE('',(#44463),#44497,.T.); +#44463 = FACE_BOUND('',#44464,.F.); +#44464 = EDGE_LOOP('',(#44465,#44475,#44483,#44491)); +#44465 = ORIENTED_EDGE('',*,*,#44466,.F.); +#44466 = EDGE_CURVE('',#44467,#44469,#44471,.T.); +#44467 = VERTEX_POINT('',#44468); +#44468 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#44469 = VERTEX_POINT('',#44470); +#44470 = CARTESIAN_POINT('',(8.550000119209,-0.64,0.399997961521)); +#44471 = LINE('',#44472,#44473); +#44472 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#44473 = VECTOR('',#44474,1.); +#44474 = DIRECTION('',(0.,0.,-1.)); +#44475 = ORIENTED_EDGE('',*,*,#44476,.T.); +#44476 = EDGE_CURVE('',#44467,#44477,#44479,.T.); +#44477 = VERTEX_POINT('',#44478); +#44478 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#44479 = LINE('',#44480,#44481); +#44480 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#44481 = VECTOR('',#44482,1.); +#44482 = DIRECTION('',(-1.,-0.,-0.)); +#44483 = ORIENTED_EDGE('',*,*,#44484,.T.); +#44484 = EDGE_CURVE('',#44477,#44485,#44487,.T.); +#44485 = VERTEX_POINT('',#44486); +#44486 = CARTESIAN_POINT('',(8.150000119209,-0.64,0.399998056888)); +#44487 = LINE('',#44488,#44489); +#44488 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#44489 = VECTOR('',#44490,1.); +#44490 = DIRECTION('',(0.,0.,-1.)); +#44491 = ORIENTED_EDGE('',*,*,#44492,.T.); +#44492 = EDGE_CURVE('',#44485,#44469,#44493,.T.); +#44493 = LINE('',#44494,#44495); +#44494 = CARTESIAN_POINT('',(8.150000119209,-0.64,0.399998056888)); +#44495 = VECTOR('',#44496,1.); +#44496 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44497 = PLANE('',#44498); +#44498 = AXIS2_PLACEMENT_3D('',#44499,#44500,#44501); +#44499 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#44500 = DIRECTION('',(0.,1.,0.)); +#44501 = DIRECTION('',(0.,-0.,1.)); +#44502 = ADVANCED_FACE('',(#44503),#44528,.T.); +#44503 = FACE_BOUND('',#44504,.T.); +#44504 = EDGE_LOOP('',(#44505,#44515,#44521,#44522)); +#44505 = ORIENTED_EDGE('',*,*,#44506,.T.); +#44506 = EDGE_CURVE('',#44507,#44509,#44511,.T.); +#44507 = VERTEX_POINT('',#44508); +#44508 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#44509 = VERTEX_POINT('',#44510); +#44510 = CARTESIAN_POINT('',(8.550000119209,-1.54,0.399997961521)); +#44511 = LINE('',#44512,#44513); +#44512 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#44513 = VECTOR('',#44514,1.); +#44514 = DIRECTION('',(0.,0.,-1.)); +#44515 = ORIENTED_EDGE('',*,*,#44516,.F.); +#44516 = EDGE_CURVE('',#44469,#44509,#44517,.T.); +#44517 = LINE('',#44518,#44519); +#44518 = CARTESIAN_POINT('',(8.550000119209,-0.64,0.399997961521)); +#44519 = VECTOR('',#44520,1.); +#44520 = DIRECTION('',(0.,-1.,0.)); +#44521 = ORIENTED_EDGE('',*,*,#44466,.F.); +#44522 = ORIENTED_EDGE('',*,*,#44523,.T.); +#44523 = EDGE_CURVE('',#44467,#44507,#44524,.T.); +#44524 = LINE('',#44525,#44526); +#44525 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#44526 = VECTOR('',#44527,1.); +#44527 = DIRECTION('',(-0.,-1.,-0.)); +#44528 = PLANE('',#44529); +#44529 = AXIS2_PLACEMENT_3D('',#44530,#44531,#44532); +#44530 = CARTESIAN_POINT('',(8.550000214576,-0.64,0.799997961521)); +#44531 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44532 = DIRECTION('',(0.,1.,0.)); +#44533 = ADVANCED_FACE('',(#44534),#44552,.F.); +#44534 = FACE_BOUND('',#44535,.T.); +#44535 = EDGE_LOOP('',(#44536,#44537,#44545,#44551)); +#44536 = ORIENTED_EDGE('',*,*,#44516,.T.); +#44537 = ORIENTED_EDGE('',*,*,#44538,.T.); +#44538 = EDGE_CURVE('',#44509,#44539,#44541,.T.); +#44539 = VERTEX_POINT('',#44540); +#44540 = CARTESIAN_POINT('',(8.150000119209,-1.54,0.399998056888)); +#44541 = LINE('',#44542,#44543); +#44542 = CARTESIAN_POINT('',(8.550000119209,-1.54,0.399997961521)); +#44543 = VECTOR('',#44544,1.); +#44544 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#44545 = ORIENTED_EDGE('',*,*,#44546,.T.); +#44546 = EDGE_CURVE('',#44539,#44485,#44547,.T.); +#44547 = LINE('',#44548,#44549); +#44548 = CARTESIAN_POINT('',(8.150000119209,-1.54,0.399998056888)); +#44549 = VECTOR('',#44550,1.); +#44550 = DIRECTION('',(0.,1.,0.)); +#44551 = ORIENTED_EDGE('',*,*,#44492,.T.); +#44552 = PLANE('',#44553); +#44553 = AXIS2_PLACEMENT_3D('',#44554,#44555,#44556); +#44554 = CARTESIAN_POINT('',(8.350000119209,-1.09,0.399998009205)); +#44555 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#44556 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44557 = ADVANCED_FACE('',(#44558),#44576,.F.); +#44558 = FACE_BOUND('',#44559,.T.); +#44559 = EDGE_LOOP('',(#44560,#44568,#44569,#44570)); +#44560 = ORIENTED_EDGE('',*,*,#44561,.F.); +#44561 = EDGE_CURVE('',#44477,#44562,#44564,.T.); +#44562 = VERTEX_POINT('',#44563); +#44563 = CARTESIAN_POINT('',(8.15,-1.54,0.4)); +#44564 = LINE('',#44565,#44566); +#44565 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#44566 = VECTOR('',#44567,1.); +#44567 = DIRECTION('',(-0.,-1.,-0.)); +#44568 = ORIENTED_EDGE('',*,*,#44484,.T.); +#44569 = ORIENTED_EDGE('',*,*,#44546,.F.); +#44570 = ORIENTED_EDGE('',*,*,#44571,.F.); +#44571 = EDGE_CURVE('',#44562,#44539,#44572,.T.); +#44572 = LINE('',#44573,#44574); +#44573 = CARTESIAN_POINT('',(8.15,-1.54,0.4)); +#44574 = VECTOR('',#44575,1.); +#44575 = DIRECTION('',(0.,0.,-1.)); +#44576 = PLANE('',#44577); +#44577 = AXIS2_PLACEMENT_3D('',#44578,#44579,#44580); +#44578 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#44579 = DIRECTION('',(1.,0.,0.)); +#44580 = DIRECTION('',(-0.,1.,0.)); +#44581 = ADVANCED_FACE('',(#44582),#44593,.F.); +#44582 = FACE_BOUND('',#44583,.T.); +#44583 = EDGE_LOOP('',(#44584,#44585,#44586,#44592)); +#44584 = ORIENTED_EDGE('',*,*,#44476,.T.); +#44585 = ORIENTED_EDGE('',*,*,#44561,.T.); +#44586 = ORIENTED_EDGE('',*,*,#44587,.F.); +#44587 = EDGE_CURVE('',#44507,#44562,#44588,.T.); +#44588 = LINE('',#44589,#44590); +#44589 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#44590 = VECTOR('',#44591,1.); +#44591 = DIRECTION('',(-1.,-0.,-0.)); +#44592 = ORIENTED_EDGE('',*,*,#44523,.F.); +#44593 = PLANE('',#44594); +#44594 = AXIS2_PLACEMENT_3D('',#44595,#44596,#44597); +#44595 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#44596 = DIRECTION('',(-0.,-0.,-1.)); +#44597 = DIRECTION('',(0.,1.,-0.)); +#44598 = ADVANCED_FACE('',(#44599),#44605,.F.); +#44599 = FACE_BOUND('',#44600,.T.); +#44600 = EDGE_LOOP('',(#44601,#44602,#44603,#44604)); +#44601 = ORIENTED_EDGE('',*,*,#44506,.F.); +#44602 = ORIENTED_EDGE('',*,*,#44587,.T.); +#44603 = ORIENTED_EDGE('',*,*,#44571,.T.); +#44604 = ORIENTED_EDGE('',*,*,#44538,.F.); +#44605 = PLANE('',#44606); +#44606 = AXIS2_PLACEMENT_3D('',#44607,#44608,#44609); +#44607 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#44608 = DIRECTION('',(0.,1.,0.)); +#44609 = DIRECTION('',(0.,-0.,1.)); +#44610 = ORIENTED_CLOSED_SHELL('',*,#44611,.F.); +#44611 = CLOSED_SHELL('',(#44612,#44652,#44683,#44707,#44731,#44748)); +#44612 = ADVANCED_FACE('',(#44613),#44647,.T.); +#44613 = FACE_BOUND('',#44614,.F.); +#44614 = EDGE_LOOP('',(#44615,#44625,#44633,#44641)); +#44615 = ORIENTED_EDGE('',*,*,#44616,.F.); +#44616 = EDGE_CURVE('',#44617,#44619,#44621,.T.); +#44617 = VERTEX_POINT('',#44618); +#44618 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#44619 = VERTEX_POINT('',#44620); +#44620 = CARTESIAN_POINT('',(8.550000119209,0.63,0.399997961521)); +#44621 = LINE('',#44622,#44623); +#44622 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#44623 = VECTOR('',#44624,1.); +#44624 = DIRECTION('',(0.,0.,-1.)); +#44625 = ORIENTED_EDGE('',*,*,#44626,.T.); +#44626 = EDGE_CURVE('',#44617,#44627,#44629,.T.); +#44627 = VERTEX_POINT('',#44628); +#44628 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#44629 = LINE('',#44630,#44631); +#44630 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#44631 = VECTOR('',#44632,1.); +#44632 = DIRECTION('',(-1.,-0.,-0.)); +#44633 = ORIENTED_EDGE('',*,*,#44634,.T.); +#44634 = EDGE_CURVE('',#44627,#44635,#44637,.T.); +#44635 = VERTEX_POINT('',#44636); +#44636 = CARTESIAN_POINT('',(8.150000119209,0.63,0.399998056888)); +#44637 = LINE('',#44638,#44639); +#44638 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#44639 = VECTOR('',#44640,1.); +#44640 = DIRECTION('',(0.,0.,-1.)); +#44641 = ORIENTED_EDGE('',*,*,#44642,.T.); +#44642 = EDGE_CURVE('',#44635,#44619,#44643,.T.); +#44643 = LINE('',#44644,#44645); +#44644 = CARTESIAN_POINT('',(8.150000119209,0.63,0.399998056888)); +#44645 = VECTOR('',#44646,1.); +#44646 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44647 = PLANE('',#44648); +#44648 = AXIS2_PLACEMENT_3D('',#44649,#44650,#44651); +#44649 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#44650 = DIRECTION('',(0.,1.,0.)); +#44651 = DIRECTION('',(0.,-0.,1.)); +#44652 = ADVANCED_FACE('',(#44653),#44678,.T.); +#44653 = FACE_BOUND('',#44654,.T.); +#44654 = EDGE_LOOP('',(#44655,#44665,#44671,#44672)); +#44655 = ORIENTED_EDGE('',*,*,#44656,.T.); +#44656 = EDGE_CURVE('',#44657,#44659,#44661,.T.); +#44657 = VERTEX_POINT('',#44658); +#44658 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#44659 = VERTEX_POINT('',#44660); +#44660 = CARTESIAN_POINT('',(8.550000119209,-0.27,0.399997961521)); +#44661 = LINE('',#44662,#44663); +#44662 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#44663 = VECTOR('',#44664,1.); +#44664 = DIRECTION('',(0.,0.,-1.)); +#44665 = ORIENTED_EDGE('',*,*,#44666,.F.); +#44666 = EDGE_CURVE('',#44619,#44659,#44667,.T.); +#44667 = LINE('',#44668,#44669); +#44668 = CARTESIAN_POINT('',(8.550000119209,0.63,0.399997961521)); +#44669 = VECTOR('',#44670,1.); +#44670 = DIRECTION('',(0.,-1.,0.)); +#44671 = ORIENTED_EDGE('',*,*,#44616,.F.); +#44672 = ORIENTED_EDGE('',*,*,#44673,.T.); +#44673 = EDGE_CURVE('',#44617,#44657,#44674,.T.); +#44674 = LINE('',#44675,#44676); +#44675 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#44676 = VECTOR('',#44677,1.); +#44677 = DIRECTION('',(-0.,-1.,-0.)); +#44678 = PLANE('',#44679); +#44679 = AXIS2_PLACEMENT_3D('',#44680,#44681,#44682); +#44680 = CARTESIAN_POINT('',(8.550000214576,0.63,0.799997961521)); +#44681 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44682 = DIRECTION('',(0.,1.,0.)); +#44683 = ADVANCED_FACE('',(#44684),#44702,.F.); +#44684 = FACE_BOUND('',#44685,.T.); +#44685 = EDGE_LOOP('',(#44686,#44687,#44695,#44701)); +#44686 = ORIENTED_EDGE('',*,*,#44666,.T.); +#44687 = ORIENTED_EDGE('',*,*,#44688,.T.); +#44688 = EDGE_CURVE('',#44659,#44689,#44691,.T.); +#44689 = VERTEX_POINT('',#44690); +#44690 = CARTESIAN_POINT('',(8.150000119209,-0.27,0.399998056888)); +#44691 = LINE('',#44692,#44693); +#44692 = CARTESIAN_POINT('',(8.550000119209,-0.27,0.399997961521)); +#44693 = VECTOR('',#44694,1.); +#44694 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#44695 = ORIENTED_EDGE('',*,*,#44696,.T.); +#44696 = EDGE_CURVE('',#44689,#44635,#44697,.T.); +#44697 = LINE('',#44698,#44699); +#44698 = CARTESIAN_POINT('',(8.150000119209,-0.27,0.399998056888)); +#44699 = VECTOR('',#44700,1.); +#44700 = DIRECTION('',(0.,1.,0.)); +#44701 = ORIENTED_EDGE('',*,*,#44642,.T.); +#44702 = PLANE('',#44703); +#44703 = AXIS2_PLACEMENT_3D('',#44704,#44705,#44706); +#44704 = CARTESIAN_POINT('',(8.350000119209,0.18,0.399998009205)); +#44705 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#44706 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44707 = ADVANCED_FACE('',(#44708),#44726,.F.); +#44708 = FACE_BOUND('',#44709,.T.); +#44709 = EDGE_LOOP('',(#44710,#44718,#44719,#44720)); +#44710 = ORIENTED_EDGE('',*,*,#44711,.F.); +#44711 = EDGE_CURVE('',#44627,#44712,#44714,.T.); +#44712 = VERTEX_POINT('',#44713); +#44713 = CARTESIAN_POINT('',(8.15,-0.27,0.4)); +#44714 = LINE('',#44715,#44716); +#44715 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#44716 = VECTOR('',#44717,1.); +#44717 = DIRECTION('',(-0.,-1.,-0.)); +#44718 = ORIENTED_EDGE('',*,*,#44634,.T.); +#44719 = ORIENTED_EDGE('',*,*,#44696,.F.); +#44720 = ORIENTED_EDGE('',*,*,#44721,.F.); +#44721 = EDGE_CURVE('',#44712,#44689,#44722,.T.); +#44722 = LINE('',#44723,#44724); +#44723 = CARTESIAN_POINT('',(8.15,-0.27,0.4)); +#44724 = VECTOR('',#44725,1.); +#44725 = DIRECTION('',(0.,0.,-1.)); +#44726 = PLANE('',#44727); +#44727 = AXIS2_PLACEMENT_3D('',#44728,#44729,#44730); +#44728 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#44729 = DIRECTION('',(1.,0.,0.)); +#44730 = DIRECTION('',(-0.,1.,0.)); +#44731 = ADVANCED_FACE('',(#44732),#44743,.F.); +#44732 = FACE_BOUND('',#44733,.T.); +#44733 = EDGE_LOOP('',(#44734,#44735,#44736,#44742)); +#44734 = ORIENTED_EDGE('',*,*,#44626,.T.); +#44735 = ORIENTED_EDGE('',*,*,#44711,.T.); +#44736 = ORIENTED_EDGE('',*,*,#44737,.F.); +#44737 = EDGE_CURVE('',#44657,#44712,#44738,.T.); +#44738 = LINE('',#44739,#44740); +#44739 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#44740 = VECTOR('',#44741,1.); +#44741 = DIRECTION('',(-1.,-0.,-0.)); +#44742 = ORIENTED_EDGE('',*,*,#44673,.F.); +#44743 = PLANE('',#44744); +#44744 = AXIS2_PLACEMENT_3D('',#44745,#44746,#44747); +#44745 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#44746 = DIRECTION('',(-0.,-0.,-1.)); +#44747 = DIRECTION('',(0.,1.,-0.)); +#44748 = ADVANCED_FACE('',(#44749),#44755,.F.); +#44749 = FACE_BOUND('',#44750,.T.); +#44750 = EDGE_LOOP('',(#44751,#44752,#44753,#44754)); +#44751 = ORIENTED_EDGE('',*,*,#44656,.F.); +#44752 = ORIENTED_EDGE('',*,*,#44737,.T.); +#44753 = ORIENTED_EDGE('',*,*,#44721,.T.); +#44754 = ORIENTED_EDGE('',*,*,#44688,.F.); +#44755 = PLANE('',#44756); +#44756 = AXIS2_PLACEMENT_3D('',#44757,#44758,#44759); +#44757 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#44758 = DIRECTION('',(0.,1.,0.)); +#44759 = DIRECTION('',(0.,-0.,1.)); +#44760 = ORIENTED_CLOSED_SHELL('',*,#44761,.F.); +#44761 = CLOSED_SHELL('',(#44762,#44802,#44833,#44857,#44881,#44898)); +#44762 = ADVANCED_FACE('',(#44763),#44797,.T.); +#44763 = FACE_BOUND('',#44764,.F.); +#44764 = EDGE_LOOP('',(#44765,#44775,#44783,#44791)); +#44765 = ORIENTED_EDGE('',*,*,#44766,.F.); +#44766 = EDGE_CURVE('',#44767,#44769,#44771,.T.); +#44767 = VERTEX_POINT('',#44768); +#44768 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#44769 = VERTEX_POINT('',#44770); +#44770 = CARTESIAN_POINT('',(8.550000119209,1.9,0.399997961521)); +#44771 = LINE('',#44772,#44773); +#44772 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#44773 = VECTOR('',#44774,1.); +#44774 = DIRECTION('',(0.,0.,-1.)); +#44775 = ORIENTED_EDGE('',*,*,#44776,.T.); +#44776 = EDGE_CURVE('',#44767,#44777,#44779,.T.); +#44777 = VERTEX_POINT('',#44778); +#44778 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#44779 = LINE('',#44780,#44781); +#44780 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#44781 = VECTOR('',#44782,1.); +#44782 = DIRECTION('',(-1.,-0.,-0.)); +#44783 = ORIENTED_EDGE('',*,*,#44784,.T.); +#44784 = EDGE_CURVE('',#44777,#44785,#44787,.T.); +#44785 = VERTEX_POINT('',#44786); +#44786 = CARTESIAN_POINT('',(8.150000119209,1.9,0.399998056888)); +#44787 = LINE('',#44788,#44789); +#44788 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#44789 = VECTOR('',#44790,1.); +#44790 = DIRECTION('',(0.,0.,-1.)); +#44791 = ORIENTED_EDGE('',*,*,#44792,.T.); +#44792 = EDGE_CURVE('',#44785,#44769,#44793,.T.); +#44793 = LINE('',#44794,#44795); +#44794 = CARTESIAN_POINT('',(8.150000119209,1.9,0.399998056888)); +#44795 = VECTOR('',#44796,1.); +#44796 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44797 = PLANE('',#44798); +#44798 = AXIS2_PLACEMENT_3D('',#44799,#44800,#44801); +#44799 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#44800 = DIRECTION('',(0.,1.,0.)); +#44801 = DIRECTION('',(0.,-0.,1.)); +#44802 = ADVANCED_FACE('',(#44803),#44828,.T.); +#44803 = FACE_BOUND('',#44804,.T.); +#44804 = EDGE_LOOP('',(#44805,#44815,#44821,#44822)); +#44805 = ORIENTED_EDGE('',*,*,#44806,.T.); +#44806 = EDGE_CURVE('',#44807,#44809,#44811,.T.); +#44807 = VERTEX_POINT('',#44808); +#44808 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#44809 = VERTEX_POINT('',#44810); +#44810 = CARTESIAN_POINT('',(8.550000119209,1.,0.399997961521)); +#44811 = LINE('',#44812,#44813); +#44812 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#44813 = VECTOR('',#44814,1.); +#44814 = DIRECTION('',(0.,0.,-1.)); +#44815 = ORIENTED_EDGE('',*,*,#44816,.F.); +#44816 = EDGE_CURVE('',#44769,#44809,#44817,.T.); +#44817 = LINE('',#44818,#44819); +#44818 = CARTESIAN_POINT('',(8.550000119209,1.9,0.399997961521)); +#44819 = VECTOR('',#44820,1.); +#44820 = DIRECTION('',(0.,-1.,0.)); +#44821 = ORIENTED_EDGE('',*,*,#44766,.F.); +#44822 = ORIENTED_EDGE('',*,*,#44823,.T.); +#44823 = EDGE_CURVE('',#44767,#44807,#44824,.T.); +#44824 = LINE('',#44825,#44826); +#44825 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#44826 = VECTOR('',#44827,1.); +#44827 = DIRECTION('',(-0.,-1.,-0.)); +#44828 = PLANE('',#44829); +#44829 = AXIS2_PLACEMENT_3D('',#44830,#44831,#44832); +#44830 = CARTESIAN_POINT('',(8.550000214576,1.9,0.799997961521)); +#44831 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44832 = DIRECTION('',(0.,1.,0.)); +#44833 = ADVANCED_FACE('',(#44834),#44852,.F.); +#44834 = FACE_BOUND('',#44835,.T.); +#44835 = EDGE_LOOP('',(#44836,#44837,#44845,#44851)); +#44836 = ORIENTED_EDGE('',*,*,#44816,.T.); +#44837 = ORIENTED_EDGE('',*,*,#44838,.T.); +#44838 = EDGE_CURVE('',#44809,#44839,#44841,.T.); +#44839 = VERTEX_POINT('',#44840); +#44840 = CARTESIAN_POINT('',(8.150000119209,1.,0.399998056888)); +#44841 = LINE('',#44842,#44843); +#44842 = CARTESIAN_POINT('',(8.550000119209,1.,0.399997961521)); +#44843 = VECTOR('',#44844,1.); +#44844 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#44845 = ORIENTED_EDGE('',*,*,#44846,.T.); +#44846 = EDGE_CURVE('',#44839,#44785,#44847,.T.); +#44847 = LINE('',#44848,#44849); +#44848 = CARTESIAN_POINT('',(8.150000119209,1.,0.399998056888)); +#44849 = VECTOR('',#44850,1.); +#44850 = DIRECTION('',(0.,1.,0.)); +#44851 = ORIENTED_EDGE('',*,*,#44792,.T.); +#44852 = PLANE('',#44853); +#44853 = AXIS2_PLACEMENT_3D('',#44854,#44855,#44856); +#44854 = CARTESIAN_POINT('',(8.350000119209,1.45,0.399998009205)); +#44855 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#44856 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44857 = ADVANCED_FACE('',(#44858),#44876,.F.); +#44858 = FACE_BOUND('',#44859,.T.); +#44859 = EDGE_LOOP('',(#44860,#44868,#44869,#44870)); +#44860 = ORIENTED_EDGE('',*,*,#44861,.F.); +#44861 = EDGE_CURVE('',#44777,#44862,#44864,.T.); +#44862 = VERTEX_POINT('',#44863); +#44863 = CARTESIAN_POINT('',(8.15,1.,0.4)); +#44864 = LINE('',#44865,#44866); +#44865 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#44866 = VECTOR('',#44867,1.); +#44867 = DIRECTION('',(-0.,-1.,-0.)); +#44868 = ORIENTED_EDGE('',*,*,#44784,.T.); +#44869 = ORIENTED_EDGE('',*,*,#44846,.F.); +#44870 = ORIENTED_EDGE('',*,*,#44871,.F.); +#44871 = EDGE_CURVE('',#44862,#44839,#44872,.T.); +#44872 = LINE('',#44873,#44874); +#44873 = CARTESIAN_POINT('',(8.15,1.,0.4)); +#44874 = VECTOR('',#44875,1.); +#44875 = DIRECTION('',(0.,0.,-1.)); +#44876 = PLANE('',#44877); +#44877 = AXIS2_PLACEMENT_3D('',#44878,#44879,#44880); +#44878 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#44879 = DIRECTION('',(1.,0.,0.)); +#44880 = DIRECTION('',(-0.,1.,0.)); +#44881 = ADVANCED_FACE('',(#44882),#44893,.F.); +#44882 = FACE_BOUND('',#44883,.T.); +#44883 = EDGE_LOOP('',(#44884,#44885,#44886,#44892)); +#44884 = ORIENTED_EDGE('',*,*,#44776,.T.); +#44885 = ORIENTED_EDGE('',*,*,#44861,.T.); +#44886 = ORIENTED_EDGE('',*,*,#44887,.F.); +#44887 = EDGE_CURVE('',#44807,#44862,#44888,.T.); +#44888 = LINE('',#44889,#44890); +#44889 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#44890 = VECTOR('',#44891,1.); +#44891 = DIRECTION('',(-1.,-0.,-0.)); +#44892 = ORIENTED_EDGE('',*,*,#44823,.F.); +#44893 = PLANE('',#44894); +#44894 = AXIS2_PLACEMENT_3D('',#44895,#44896,#44897); +#44895 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#44896 = DIRECTION('',(-0.,-0.,-1.)); +#44897 = DIRECTION('',(0.,1.,-0.)); +#44898 = ADVANCED_FACE('',(#44899),#44905,.F.); +#44899 = FACE_BOUND('',#44900,.T.); +#44900 = EDGE_LOOP('',(#44901,#44902,#44903,#44904)); +#44901 = ORIENTED_EDGE('',*,*,#44806,.F.); +#44902 = ORIENTED_EDGE('',*,*,#44887,.T.); +#44903 = ORIENTED_EDGE('',*,*,#44871,.T.); +#44904 = ORIENTED_EDGE('',*,*,#44838,.F.); +#44905 = PLANE('',#44906); +#44906 = AXIS2_PLACEMENT_3D('',#44907,#44908,#44909); +#44907 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#44908 = DIRECTION('',(0.,1.,0.)); +#44909 = DIRECTION('',(0.,-0.,1.)); +#44910 = ORIENTED_CLOSED_SHELL('',*,#44911,.F.); +#44911 = CLOSED_SHELL('',(#44912,#44952,#44983,#45007,#45031,#45048)); +#44912 = ADVANCED_FACE('',(#44913),#44947,.T.); +#44913 = FACE_BOUND('',#44914,.F.); +#44914 = EDGE_LOOP('',(#44915,#44925,#44933,#44941)); +#44915 = ORIENTED_EDGE('',*,*,#44916,.F.); +#44916 = EDGE_CURVE('',#44917,#44919,#44921,.T.); +#44917 = VERTEX_POINT('',#44918); +#44918 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#44919 = VERTEX_POINT('',#44920); +#44920 = CARTESIAN_POINT('',(8.550000119209,3.17,0.399997961521)); +#44921 = LINE('',#44922,#44923); +#44922 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#44923 = VECTOR('',#44924,1.); +#44924 = DIRECTION('',(0.,0.,-1.)); +#44925 = ORIENTED_EDGE('',*,*,#44926,.T.); +#44926 = EDGE_CURVE('',#44917,#44927,#44929,.T.); +#44927 = VERTEX_POINT('',#44928); +#44928 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#44929 = LINE('',#44930,#44931); +#44930 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#44931 = VECTOR('',#44932,1.); +#44932 = DIRECTION('',(-1.,-0.,-0.)); +#44933 = ORIENTED_EDGE('',*,*,#44934,.T.); +#44934 = EDGE_CURVE('',#44927,#44935,#44937,.T.); +#44935 = VERTEX_POINT('',#44936); +#44936 = CARTESIAN_POINT('',(8.150000119209,3.17,0.399998056888)); +#44937 = LINE('',#44938,#44939); +#44938 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#44939 = VECTOR('',#44940,1.); +#44940 = DIRECTION('',(0.,0.,-1.)); +#44941 = ORIENTED_EDGE('',*,*,#44942,.T.); +#44942 = EDGE_CURVE('',#44935,#44919,#44943,.T.); +#44943 = LINE('',#44944,#44945); +#44944 = CARTESIAN_POINT('',(8.150000119209,3.17,0.399998056888)); +#44945 = VECTOR('',#44946,1.); +#44946 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44947 = PLANE('',#44948); +#44948 = AXIS2_PLACEMENT_3D('',#44949,#44950,#44951); +#44949 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#44950 = DIRECTION('',(0.,1.,0.)); +#44951 = DIRECTION('',(0.,-0.,1.)); +#44952 = ADVANCED_FACE('',(#44953),#44978,.T.); +#44953 = FACE_BOUND('',#44954,.T.); +#44954 = EDGE_LOOP('',(#44955,#44965,#44971,#44972)); +#44955 = ORIENTED_EDGE('',*,*,#44956,.T.); +#44956 = EDGE_CURVE('',#44957,#44959,#44961,.T.); +#44957 = VERTEX_POINT('',#44958); +#44958 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#44959 = VERTEX_POINT('',#44960); +#44960 = CARTESIAN_POINT('',(8.550000119209,2.27,0.399997961521)); +#44961 = LINE('',#44962,#44963); +#44962 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#44963 = VECTOR('',#44964,1.); +#44964 = DIRECTION('',(0.,0.,-1.)); +#44965 = ORIENTED_EDGE('',*,*,#44966,.F.); +#44966 = EDGE_CURVE('',#44919,#44959,#44967,.T.); +#44967 = LINE('',#44968,#44969); +#44968 = CARTESIAN_POINT('',(8.550000119209,3.17,0.399997961521)); +#44969 = VECTOR('',#44970,1.); +#44970 = DIRECTION('',(0.,-1.,0.)); +#44971 = ORIENTED_EDGE('',*,*,#44916,.F.); +#44972 = ORIENTED_EDGE('',*,*,#44973,.T.); +#44973 = EDGE_CURVE('',#44917,#44957,#44974,.T.); +#44974 = LINE('',#44975,#44976); +#44975 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#44976 = VECTOR('',#44977,1.); +#44977 = DIRECTION('',(-0.,-1.,-0.)); +#44978 = PLANE('',#44979); +#44979 = AXIS2_PLACEMENT_3D('',#44980,#44981,#44982); +#44980 = CARTESIAN_POINT('',(8.550000214576,3.17,0.799997961521)); +#44981 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#44982 = DIRECTION('',(0.,1.,0.)); +#44983 = ADVANCED_FACE('',(#44984),#45002,.F.); +#44984 = FACE_BOUND('',#44985,.T.); +#44985 = EDGE_LOOP('',(#44986,#44987,#44995,#45001)); +#44986 = ORIENTED_EDGE('',*,*,#44966,.T.); +#44987 = ORIENTED_EDGE('',*,*,#44988,.T.); +#44988 = EDGE_CURVE('',#44959,#44989,#44991,.T.); +#44989 = VERTEX_POINT('',#44990); +#44990 = CARTESIAN_POINT('',(8.150000119209,2.27,0.399998056888)); +#44991 = LINE('',#44992,#44993); +#44992 = CARTESIAN_POINT('',(8.550000119209,2.27,0.399997961521)); +#44993 = VECTOR('',#44994,1.); +#44994 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#44995 = ORIENTED_EDGE('',*,*,#44996,.T.); +#44996 = EDGE_CURVE('',#44989,#44935,#44997,.T.); +#44997 = LINE('',#44998,#44999); +#44998 = CARTESIAN_POINT('',(8.150000119209,2.27,0.399998056888)); +#44999 = VECTOR('',#45000,1.); +#45000 = DIRECTION('',(0.,1.,0.)); +#45001 = ORIENTED_EDGE('',*,*,#44942,.T.); +#45002 = PLANE('',#45003); +#45003 = AXIS2_PLACEMENT_3D('',#45004,#45005,#45006); +#45004 = CARTESIAN_POINT('',(8.350000119209,2.72,0.399998009205)); +#45005 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#45006 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#45007 = ADVANCED_FACE('',(#45008),#45026,.F.); +#45008 = FACE_BOUND('',#45009,.T.); +#45009 = EDGE_LOOP('',(#45010,#45018,#45019,#45020)); +#45010 = ORIENTED_EDGE('',*,*,#45011,.F.); +#45011 = EDGE_CURVE('',#44927,#45012,#45014,.T.); +#45012 = VERTEX_POINT('',#45013); +#45013 = CARTESIAN_POINT('',(8.15,2.27,0.4)); +#45014 = LINE('',#45015,#45016); +#45015 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#45016 = VECTOR('',#45017,1.); +#45017 = DIRECTION('',(-0.,-1.,-0.)); +#45018 = ORIENTED_EDGE('',*,*,#44934,.T.); +#45019 = ORIENTED_EDGE('',*,*,#44996,.F.); +#45020 = ORIENTED_EDGE('',*,*,#45021,.F.); +#45021 = EDGE_CURVE('',#45012,#44989,#45022,.T.); +#45022 = LINE('',#45023,#45024); +#45023 = CARTESIAN_POINT('',(8.15,2.27,0.4)); +#45024 = VECTOR('',#45025,1.); +#45025 = DIRECTION('',(0.,0.,-1.)); +#45026 = PLANE('',#45027); +#45027 = AXIS2_PLACEMENT_3D('',#45028,#45029,#45030); +#45028 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#45029 = DIRECTION('',(1.,0.,0.)); +#45030 = DIRECTION('',(-0.,1.,0.)); +#45031 = ADVANCED_FACE('',(#45032),#45043,.F.); +#45032 = FACE_BOUND('',#45033,.T.); +#45033 = EDGE_LOOP('',(#45034,#45035,#45036,#45042)); +#45034 = ORIENTED_EDGE('',*,*,#44926,.T.); +#45035 = ORIENTED_EDGE('',*,*,#45011,.T.); +#45036 = ORIENTED_EDGE('',*,*,#45037,.F.); +#45037 = EDGE_CURVE('',#44957,#45012,#45038,.T.); +#45038 = LINE('',#45039,#45040); +#45039 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#45040 = VECTOR('',#45041,1.); +#45041 = DIRECTION('',(-1.,-0.,-0.)); +#45042 = ORIENTED_EDGE('',*,*,#44973,.F.); +#45043 = PLANE('',#45044); +#45044 = AXIS2_PLACEMENT_3D('',#45045,#45046,#45047); +#45045 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#45046 = DIRECTION('',(-0.,-0.,-1.)); +#45047 = DIRECTION('',(0.,1.,-0.)); +#45048 = ADVANCED_FACE('',(#45049),#45055,.F.); +#45049 = FACE_BOUND('',#45050,.T.); +#45050 = EDGE_LOOP('',(#45051,#45052,#45053,#45054)); +#45051 = ORIENTED_EDGE('',*,*,#44956,.F.); +#45052 = ORIENTED_EDGE('',*,*,#45037,.T.); +#45053 = ORIENTED_EDGE('',*,*,#45021,.T.); +#45054 = ORIENTED_EDGE('',*,*,#44988,.F.); +#45055 = PLANE('',#45056); +#45056 = AXIS2_PLACEMENT_3D('',#45057,#45058,#45059); +#45057 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#45058 = DIRECTION('',(0.,1.,0.)); +#45059 = DIRECTION('',(0.,-0.,1.)); +#45060 = ORIENTED_CLOSED_SHELL('',*,#45061,.F.); +#45061 = CLOSED_SHELL('',(#45062,#45102,#45133,#45157,#45181,#45198)); +#45062 = ADVANCED_FACE('',(#45063),#45097,.T.); +#45063 = FACE_BOUND('',#45064,.F.); +#45064 = EDGE_LOOP('',(#45065,#45075,#45083,#45091)); +#45065 = ORIENTED_EDGE('',*,*,#45066,.F.); +#45066 = EDGE_CURVE('',#45067,#45069,#45071,.T.); +#45067 = VERTEX_POINT('',#45068); +#45068 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#45069 = VERTEX_POINT('',#45070); +#45070 = CARTESIAN_POINT('',(8.550000119209,4.44,0.399997961521)); +#45071 = LINE('',#45072,#45073); +#45072 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#45073 = VECTOR('',#45074,1.); +#45074 = DIRECTION('',(0.,0.,-1.)); +#45075 = ORIENTED_EDGE('',*,*,#45076,.T.); +#45076 = EDGE_CURVE('',#45067,#45077,#45079,.T.); +#45077 = VERTEX_POINT('',#45078); +#45078 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#45079 = LINE('',#45080,#45081); +#45080 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#45081 = VECTOR('',#45082,1.); +#45082 = DIRECTION('',(-1.,-0.,-0.)); +#45083 = ORIENTED_EDGE('',*,*,#45084,.T.); +#45084 = EDGE_CURVE('',#45077,#45085,#45087,.T.); +#45085 = VERTEX_POINT('',#45086); +#45086 = CARTESIAN_POINT('',(8.150000119209,4.44,0.399998056888)); +#45087 = LINE('',#45088,#45089); +#45088 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#45089 = VECTOR('',#45090,1.); +#45090 = DIRECTION('',(0.,0.,-1.)); +#45091 = ORIENTED_EDGE('',*,*,#45092,.T.); +#45092 = EDGE_CURVE('',#45085,#45069,#45093,.T.); +#45093 = LINE('',#45094,#45095); +#45094 = CARTESIAN_POINT('',(8.150000119209,4.44,0.399998056888)); +#45095 = VECTOR('',#45096,1.); +#45096 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#45097 = PLANE('',#45098); +#45098 = AXIS2_PLACEMENT_3D('',#45099,#45100,#45101); +#45099 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#45100 = DIRECTION('',(0.,1.,0.)); +#45101 = DIRECTION('',(0.,-0.,1.)); +#45102 = ADVANCED_FACE('',(#45103),#45128,.T.); +#45103 = FACE_BOUND('',#45104,.T.); +#45104 = EDGE_LOOP('',(#45105,#45115,#45121,#45122)); +#45105 = ORIENTED_EDGE('',*,*,#45106,.T.); +#45106 = EDGE_CURVE('',#45107,#45109,#45111,.T.); +#45107 = VERTEX_POINT('',#45108); +#45108 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#45109 = VERTEX_POINT('',#45110); +#45110 = CARTESIAN_POINT('',(8.550000119209,3.54,0.399997961521)); +#45111 = LINE('',#45112,#45113); +#45112 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#45113 = VECTOR('',#45114,1.); +#45114 = DIRECTION('',(0.,0.,-1.)); +#45115 = ORIENTED_EDGE('',*,*,#45116,.F.); +#45116 = EDGE_CURVE('',#45069,#45109,#45117,.T.); +#45117 = LINE('',#45118,#45119); +#45118 = CARTESIAN_POINT('',(8.550000119209,4.44,0.399997961521)); +#45119 = VECTOR('',#45120,1.); +#45120 = DIRECTION('',(0.,-1.,0.)); +#45121 = ORIENTED_EDGE('',*,*,#45066,.F.); +#45122 = ORIENTED_EDGE('',*,*,#45123,.T.); +#45123 = EDGE_CURVE('',#45067,#45107,#45124,.T.); +#45124 = LINE('',#45125,#45126); +#45125 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#45126 = VECTOR('',#45127,1.); +#45127 = DIRECTION('',(-0.,-1.,-0.)); +#45128 = PLANE('',#45129); +#45129 = AXIS2_PLACEMENT_3D('',#45130,#45131,#45132); +#45130 = CARTESIAN_POINT('',(8.550000214576,4.44,0.799997961521)); +#45131 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#45132 = DIRECTION('',(0.,1.,0.)); +#45133 = ADVANCED_FACE('',(#45134),#45152,.F.); +#45134 = FACE_BOUND('',#45135,.T.); +#45135 = EDGE_LOOP('',(#45136,#45137,#45145,#45151)); +#45136 = ORIENTED_EDGE('',*,*,#45116,.T.); +#45137 = ORIENTED_EDGE('',*,*,#45138,.T.); +#45138 = EDGE_CURVE('',#45109,#45139,#45141,.T.); +#45139 = VERTEX_POINT('',#45140); +#45140 = CARTESIAN_POINT('',(8.150000119209,3.54,0.399998056888)); +#45141 = LINE('',#45142,#45143); +#45142 = CARTESIAN_POINT('',(8.550000119209,3.54,0.399997961521)); +#45143 = VECTOR('',#45144,1.); +#45144 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#45145 = ORIENTED_EDGE('',*,*,#45146,.T.); +#45146 = EDGE_CURVE('',#45139,#45085,#45147,.T.); +#45147 = LINE('',#45148,#45149); +#45148 = CARTESIAN_POINT('',(8.150000119209,3.54,0.399998056888)); +#45149 = VECTOR('',#45150,1.); +#45150 = DIRECTION('',(0.,1.,0.)); +#45151 = ORIENTED_EDGE('',*,*,#45092,.T.); +#45152 = PLANE('',#45153); +#45153 = AXIS2_PLACEMENT_3D('',#45154,#45155,#45156); +#45154 = CARTESIAN_POINT('',(8.350000119209,3.99,0.399998009205)); +#45155 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#45156 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#45157 = ADVANCED_FACE('',(#45158),#45176,.F.); +#45158 = FACE_BOUND('',#45159,.T.); +#45159 = EDGE_LOOP('',(#45160,#45168,#45169,#45170)); +#45160 = ORIENTED_EDGE('',*,*,#45161,.F.); +#45161 = EDGE_CURVE('',#45077,#45162,#45164,.T.); +#45162 = VERTEX_POINT('',#45163); +#45163 = CARTESIAN_POINT('',(8.15,3.54,0.4)); +#45164 = LINE('',#45165,#45166); +#45165 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#45166 = VECTOR('',#45167,1.); +#45167 = DIRECTION('',(-0.,-1.,-0.)); +#45168 = ORIENTED_EDGE('',*,*,#45084,.T.); +#45169 = ORIENTED_EDGE('',*,*,#45146,.F.); +#45170 = ORIENTED_EDGE('',*,*,#45171,.F.); +#45171 = EDGE_CURVE('',#45162,#45139,#45172,.T.); +#45172 = LINE('',#45173,#45174); +#45173 = CARTESIAN_POINT('',(8.15,3.54,0.4)); +#45174 = VECTOR('',#45175,1.); +#45175 = DIRECTION('',(0.,0.,-1.)); +#45176 = PLANE('',#45177); +#45177 = AXIS2_PLACEMENT_3D('',#45178,#45179,#45180); +#45178 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#45179 = DIRECTION('',(1.,0.,0.)); +#45180 = DIRECTION('',(-0.,1.,0.)); +#45181 = ADVANCED_FACE('',(#45182),#45193,.F.); +#45182 = FACE_BOUND('',#45183,.T.); +#45183 = EDGE_LOOP('',(#45184,#45185,#45186,#45192)); +#45184 = ORIENTED_EDGE('',*,*,#45076,.T.); +#45185 = ORIENTED_EDGE('',*,*,#45161,.T.); +#45186 = ORIENTED_EDGE('',*,*,#45187,.F.); +#45187 = EDGE_CURVE('',#45107,#45162,#45188,.T.); +#45188 = LINE('',#45189,#45190); +#45189 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#45190 = VECTOR('',#45191,1.); +#45191 = DIRECTION('',(-1.,-0.,-0.)); +#45192 = ORIENTED_EDGE('',*,*,#45123,.F.); +#45193 = PLANE('',#45194); +#45194 = AXIS2_PLACEMENT_3D('',#45195,#45196,#45197); +#45195 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#45196 = DIRECTION('',(-0.,-0.,-1.)); +#45197 = DIRECTION('',(0.,1.,-0.)); +#45198 = ADVANCED_FACE('',(#45199),#45205,.F.); +#45199 = FACE_BOUND('',#45200,.T.); +#45200 = EDGE_LOOP('',(#45201,#45202,#45203,#45204)); +#45201 = ORIENTED_EDGE('',*,*,#45106,.F.); +#45202 = ORIENTED_EDGE('',*,*,#45187,.T.); +#45203 = ORIENTED_EDGE('',*,*,#45171,.T.); +#45204 = ORIENTED_EDGE('',*,*,#45138,.F.); +#45205 = PLANE('',#45206); +#45206 = AXIS2_PLACEMENT_3D('',#45207,#45208,#45209); +#45207 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#45208 = DIRECTION('',(0.,1.,0.)); +#45209 = DIRECTION('',(0.,-0.,1.)); +#45210 = ORIENTED_CLOSED_SHELL('',*,#45211,.F.); +#45211 = CLOSED_SHELL('',(#45212,#45252,#45283,#45307,#45331,#45348)); +#45212 = ADVANCED_FACE('',(#45213),#45247,.T.); +#45213 = FACE_BOUND('',#45214,.F.); +#45214 = EDGE_LOOP('',(#45215,#45225,#45233,#45241)); +#45215 = ORIENTED_EDGE('',*,*,#45216,.F.); +#45216 = EDGE_CURVE('',#45217,#45219,#45221,.T.); +#45217 = VERTEX_POINT('',#45218); +#45218 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#45219 = VERTEX_POINT('',#45220); +#45220 = CARTESIAN_POINT('',(8.550000119209,5.71,0.399997961521)); +#45221 = LINE('',#45222,#45223); +#45222 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#45223 = VECTOR('',#45224,1.); +#45224 = DIRECTION('',(0.,0.,-1.)); +#45225 = ORIENTED_EDGE('',*,*,#45226,.T.); +#45226 = EDGE_CURVE('',#45217,#45227,#45229,.T.); +#45227 = VERTEX_POINT('',#45228); +#45228 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#45229 = LINE('',#45230,#45231); +#45230 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#45231 = VECTOR('',#45232,1.); +#45232 = DIRECTION('',(-1.,-0.,-0.)); +#45233 = ORIENTED_EDGE('',*,*,#45234,.T.); +#45234 = EDGE_CURVE('',#45227,#45235,#45237,.T.); +#45235 = VERTEX_POINT('',#45236); +#45236 = CARTESIAN_POINT('',(8.150000119209,5.71,0.399998056888)); +#45237 = LINE('',#45238,#45239); +#45238 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#45239 = VECTOR('',#45240,1.); +#45240 = DIRECTION('',(0.,0.,-1.)); +#45241 = ORIENTED_EDGE('',*,*,#45242,.T.); +#45242 = EDGE_CURVE('',#45235,#45219,#45243,.T.); +#45243 = LINE('',#45244,#45245); +#45244 = CARTESIAN_POINT('',(8.150000119209,5.71,0.399998056888)); +#45245 = VECTOR('',#45246,1.); +#45246 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#45247 = PLANE('',#45248); +#45248 = AXIS2_PLACEMENT_3D('',#45249,#45250,#45251); +#45249 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#45250 = DIRECTION('',(0.,1.,0.)); +#45251 = DIRECTION('',(0.,-0.,1.)); +#45252 = ADVANCED_FACE('',(#45253),#45278,.T.); +#45253 = FACE_BOUND('',#45254,.T.); +#45254 = EDGE_LOOP('',(#45255,#45265,#45271,#45272)); +#45255 = ORIENTED_EDGE('',*,*,#45256,.T.); +#45256 = EDGE_CURVE('',#45257,#45259,#45261,.T.); +#45257 = VERTEX_POINT('',#45258); +#45258 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#45259 = VERTEX_POINT('',#45260); +#45260 = CARTESIAN_POINT('',(8.550000119209,4.81,0.399997961521)); +#45261 = LINE('',#45262,#45263); +#45262 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#45263 = VECTOR('',#45264,1.); +#45264 = DIRECTION('',(0.,0.,-1.)); +#45265 = ORIENTED_EDGE('',*,*,#45266,.F.); +#45266 = EDGE_CURVE('',#45219,#45259,#45267,.T.); +#45267 = LINE('',#45268,#45269); +#45268 = CARTESIAN_POINT('',(8.550000119209,5.71,0.399997961521)); +#45269 = VECTOR('',#45270,1.); +#45270 = DIRECTION('',(0.,-1.,0.)); +#45271 = ORIENTED_EDGE('',*,*,#45216,.F.); +#45272 = ORIENTED_EDGE('',*,*,#45273,.T.); +#45273 = EDGE_CURVE('',#45217,#45257,#45274,.T.); +#45274 = LINE('',#45275,#45276); +#45275 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#45276 = VECTOR('',#45277,1.); +#45277 = DIRECTION('',(-0.,-1.,-0.)); +#45278 = PLANE('',#45279); +#45279 = AXIS2_PLACEMENT_3D('',#45280,#45281,#45282); +#45280 = CARTESIAN_POINT('',(8.550000214576,5.71,0.799997961521)); +#45281 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#45282 = DIRECTION('',(0.,1.,0.)); +#45283 = ADVANCED_FACE('',(#45284),#45302,.F.); +#45284 = FACE_BOUND('',#45285,.T.); +#45285 = EDGE_LOOP('',(#45286,#45287,#45295,#45301)); +#45286 = ORIENTED_EDGE('',*,*,#45266,.T.); +#45287 = ORIENTED_EDGE('',*,*,#45288,.T.); +#45288 = EDGE_CURVE('',#45259,#45289,#45291,.T.); +#45289 = VERTEX_POINT('',#45290); +#45290 = CARTESIAN_POINT('',(8.150000119209,4.81,0.399998056888)); +#45291 = LINE('',#45292,#45293); +#45292 = CARTESIAN_POINT('',(8.550000119209,4.81,0.399997961521)); +#45293 = VECTOR('',#45294,1.); +#45294 = DIRECTION('',(-1.,0.,2.3841859331E-07)); +#45295 = ORIENTED_EDGE('',*,*,#45296,.T.); +#45296 = EDGE_CURVE('',#45289,#45235,#45297,.T.); +#45297 = LINE('',#45298,#45299); +#45298 = CARTESIAN_POINT('',(8.150000119209,4.81,0.399998056888)); +#45299 = VECTOR('',#45300,1.); +#45300 = DIRECTION('',(0.,1.,0.)); +#45301 = ORIENTED_EDGE('',*,*,#45242,.T.); +#45302 = PLANE('',#45303); +#45303 = AXIS2_PLACEMENT_3D('',#45304,#45305,#45306); +#45304 = CARTESIAN_POINT('',(8.350000119209,5.26,0.399998009205)); +#45305 = DIRECTION('',(2.3841859331E-07,0.,1.)); +#45306 = DIRECTION('',(1.,0.,-2.3841859331E-07)); +#45307 = ADVANCED_FACE('',(#45308),#45326,.F.); +#45308 = FACE_BOUND('',#45309,.T.); +#45309 = EDGE_LOOP('',(#45310,#45318,#45319,#45320)); +#45310 = ORIENTED_EDGE('',*,*,#45311,.F.); +#45311 = EDGE_CURVE('',#45227,#45312,#45314,.T.); +#45312 = VERTEX_POINT('',#45313); +#45313 = CARTESIAN_POINT('',(8.15,4.81,0.4)); +#45314 = LINE('',#45315,#45316); +#45315 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#45316 = VECTOR('',#45317,1.); +#45317 = DIRECTION('',(-0.,-1.,-0.)); +#45318 = ORIENTED_EDGE('',*,*,#45234,.T.); +#45319 = ORIENTED_EDGE('',*,*,#45296,.F.); +#45320 = ORIENTED_EDGE('',*,*,#45321,.F.); +#45321 = EDGE_CURVE('',#45312,#45289,#45322,.T.); +#45322 = LINE('',#45323,#45324); +#45323 = CARTESIAN_POINT('',(8.15,4.81,0.4)); +#45324 = VECTOR('',#45325,1.); +#45325 = DIRECTION('',(0.,0.,-1.)); +#45326 = PLANE('',#45327); +#45327 = AXIS2_PLACEMENT_3D('',#45328,#45329,#45330); +#45328 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#45329 = DIRECTION('',(1.,0.,0.)); +#45330 = DIRECTION('',(-0.,1.,0.)); +#45331 = ADVANCED_FACE('',(#45332),#45343,.F.); +#45332 = FACE_BOUND('',#45333,.T.); +#45333 = EDGE_LOOP('',(#45334,#45335,#45336,#45342)); +#45334 = ORIENTED_EDGE('',*,*,#45226,.T.); +#45335 = ORIENTED_EDGE('',*,*,#45311,.T.); +#45336 = ORIENTED_EDGE('',*,*,#45337,.F.); +#45337 = EDGE_CURVE('',#45257,#45312,#45338,.T.); +#45338 = LINE('',#45339,#45340); +#45339 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#45340 = VECTOR('',#45341,1.); +#45341 = DIRECTION('',(-1.,-0.,-0.)); +#45342 = ORIENTED_EDGE('',*,*,#45273,.F.); +#45343 = PLANE('',#45344); +#45344 = AXIS2_PLACEMENT_3D('',#45345,#45346,#45347); +#45345 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#45346 = DIRECTION('',(-0.,-0.,-1.)); +#45347 = DIRECTION('',(0.,1.,-0.)); +#45348 = ADVANCED_FACE('',(#45349),#45355,.F.); +#45349 = FACE_BOUND('',#45350,.T.); +#45350 = EDGE_LOOP('',(#45351,#45352,#45353,#45354)); +#45351 = ORIENTED_EDGE('',*,*,#45256,.F.); +#45352 = ORIENTED_EDGE('',*,*,#45337,.T.); +#45353 = ORIENTED_EDGE('',*,*,#45321,.T.); +#45354 = ORIENTED_EDGE('',*,*,#45288,.F.); +#45355 = PLANE('',#45356); +#45356 = AXIS2_PLACEMENT_3D('',#45357,#45358,#45359); +#45357 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#45358 = DIRECTION('',(0.,1.,0.)); +#45359 = DIRECTION('',(0.,-0.,1.)); +#45360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#45364)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#45361,#45362,#45363)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#45361 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#45362 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#45363 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#45364 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#45361, + 'distance_accuracy_value','confusion accuracy'); +#45365 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#45366,#45368); +#45366 = ( REPRESENTATION_RELATIONSHIP('','',#30034,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#45367) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#45367 = ITEM_DEFINED_TRANSFORMATION('','',#11,#207); +#45368 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #45369); +#45369 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('49','U1','',#5,#30029,$); +#45370 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#30031)); +#45371 = SHAPE_DEFINITION_REPRESENTATION(#45372,#45378); +#45372 = PRODUCT_DEFINITION_SHAPE('','',#45373); +#45373 = PRODUCT_DEFINITION('design','',#45374,#45377); +#45374 = PRODUCT_DEFINITION_FORMATION('','',#45375); +#45375 = PRODUCT('SOIC-16_3.9x9.9mm_P1.27mm','SOIC-16_3.9x9.9mm_P1.27mm' + ,'',(#45376)); +#45376 = PRODUCT_CONTEXT('',#2,'mechanical'); +#45377 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#45378 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#45379),#53585); +#45379 = MANIFOLD_SOLID_BREP('',#45380); +#45380 = CLOSED_SHELL('',(#45381,#45419,#45482,#45505,#45534,#45557, + #45708,#45859,#45882,#45905,#45922,#45945,#46033,#46049,#46079, + #46110,#46141,#46172,#46203,#46234,#46265,#46296,#46327,#46358, + #46389,#46420,#46451,#46482,#46513,#46544,#46561,#46578,#46609, + #46640,#46671,#46702,#46733,#46764,#46795,#46826,#46857,#46888, + #46919,#46950,#46981,#47012,#47043,#47073,#47096,#47119,#47136, + #47181,#47331,#47354,#47377,#47400,#47551,#47589,#47638,#47730, + #47755,#47839,#47861,#47953,#47978,#48062,#48084,#48176,#48201, + #48285,#48307,#48399,#48424,#48508,#48530,#48622,#48647,#48731, + #48753,#48845,#48870,#48954,#48976,#49068,#49093,#49177,#49194, + #49279,#49304,#49381,#49466,#49491,#49568,#49585,#49677,#49702, + #49786,#49808,#49900,#49925,#50009,#50031,#50123,#50148,#50232, + #50254,#50346,#50371,#50455,#50477,#50569,#50594,#50678,#50700, + #50792,#50817,#50901,#50923,#51015,#51040,#51124,#51141,#51160, + #51179,#51198,#51217,#51236,#51255,#51274,#51320,#51336,#51355, + #51374,#51393,#51412,#51431,#51450,#51469,#51485,#51502,#51514, + #51531,#51548,#51565,#51582,#51599,#51616,#51633,#51645,#51662, + #51679,#51696,#51713,#51730,#51747,#51764,#51776,#51793,#51810, + #51827,#51844,#51861,#51878,#51895,#51907,#51924,#51941,#51958, + #51975,#51992,#52009,#52026,#52038,#52055,#52072,#52089,#52106, + #52123,#52140,#52157,#52169,#52186,#52203,#52220,#52237,#52254, + #52271,#52288,#52300,#52317,#52334,#52351,#52368,#52385,#52402, + #52419,#52431,#52448,#52465,#52482,#52499,#52516,#52533,#52545, + #52562,#52579,#52596,#52613,#52630,#52647,#52659,#52676,#52693, + #52710,#52727,#52744,#52761,#52778,#52790,#52807,#52824,#52841, + #52858,#52875,#52892,#52909,#52921,#52938,#52955,#52972,#52989, + #53006,#53023,#53040,#53052,#53069,#53086,#53103,#53120,#53137, + #53154,#53171,#53183,#53200,#53217,#53234,#53251,#53268,#53285, + #53302,#53314,#53331,#53348,#53365,#53382,#53399,#53416,#53433, + #53445,#53462,#53479,#53496,#53513,#53530,#53547,#53564,#53576)); +#45381 = ADVANCED_FACE('',(#45382),#45414,.F.); +#45382 = FACE_BOUND('',#45383,.F.); +#45383 = EDGE_LOOP('',(#45384,#45394,#45401,#45409)); +#45384 = ORIENTED_EDGE('',*,*,#45385,.T.); +#45385 = EDGE_CURVE('',#45386,#45388,#45390,.T.); +#45386 = VERTEX_POINT('',#45387); +#45387 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#45388 = VERTEX_POINT('',#45389); +#45389 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#45390 = LINE('',#45391,#45392); +#45391 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#45392 = VECTOR('',#45393,1.); +#45393 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45394 = ORIENTED_EDGE('',*,*,#45395,.T.); +#45395 = EDGE_CURVE('',#45388,#45396,#45398,.T.); +#45396 = VERTEX_POINT('',#45397); +#45397 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#45398 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45399,#45400),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45399 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#45400 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#45401 = ORIENTED_EDGE('',*,*,#45402,.F.); +#45402 = EDGE_CURVE('',#45403,#45396,#45405,.T.); +#45403 = VERTEX_POINT('',#45404); +#45404 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#45405 = LINE('',#45406,#45407); +#45406 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#45407 = VECTOR('',#45408,1.); +#45408 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45409 = ORIENTED_EDGE('',*,*,#45410,.F.); +#45410 = EDGE_CURVE('',#45386,#45403,#45411,.T.); +#45411 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45412,#45413),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45412 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#45413 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#45414 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45415,#45416) + ,(#45417,#45418 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#45415 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#45416 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#45417 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#45418 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#45419 = ADVANCED_FACE('',(#45420),#45477,.F.); +#45420 = FACE_BOUND('',#45421,.T.); +#45421 = EDGE_LOOP('',(#45422,#45423,#45431,#45439,#45447,#45455,#45463, + #45471)); +#45422 = ORIENTED_EDGE('',*,*,#45385,.T.); +#45423 = ORIENTED_EDGE('',*,*,#45424,.T.); +#45424 = EDGE_CURVE('',#45388,#45425,#45427,.T.); +#45425 = VERTEX_POINT('',#45426); +#45426 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#45427 = LINE('',#45428,#45429); +#45428 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#45429 = VECTOR('',#45430,1.); +#45430 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#45431 = ORIENTED_EDGE('',*,*,#45432,.T.); +#45432 = EDGE_CURVE('',#45425,#45433,#45435,.T.); +#45433 = VERTEX_POINT('',#45434); +#45434 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#45435 = LINE('',#45436,#45437); +#45436 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#45437 = VECTOR('',#45438,1.); +#45438 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45439 = ORIENTED_EDGE('',*,*,#45440,.T.); +#45440 = EDGE_CURVE('',#45433,#45441,#45443,.T.); +#45441 = VERTEX_POINT('',#45442); +#45442 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#45443 = LINE('',#45444,#45445); +#45444 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#45445 = VECTOR('',#45446,1.); +#45446 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#45447 = ORIENTED_EDGE('',*,*,#45448,.T.); +#45448 = EDGE_CURVE('',#45441,#45449,#45451,.T.); +#45449 = VERTEX_POINT('',#45450); +#45450 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#45451 = LINE('',#45452,#45453); +#45452 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#45453 = VECTOR('',#45454,1.); +#45454 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45455 = ORIENTED_EDGE('',*,*,#45456,.T.); +#45456 = EDGE_CURVE('',#45449,#45457,#45459,.T.); +#45457 = VERTEX_POINT('',#45458); +#45458 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#45459 = LINE('',#45460,#45461); +#45460 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#45461 = VECTOR('',#45462,1.); +#45462 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#45463 = ORIENTED_EDGE('',*,*,#45464,.T.); +#45464 = EDGE_CURVE('',#45457,#45465,#45467,.T.); +#45465 = VERTEX_POINT('',#45466); +#45466 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#45467 = LINE('',#45468,#45469); +#45468 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#45469 = VECTOR('',#45470,1.); +#45470 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45471 = ORIENTED_EDGE('',*,*,#45472,.T.); +#45472 = EDGE_CURVE('',#45465,#45386,#45473,.T.); +#45473 = LINE('',#45474,#45475); +#45474 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#45475 = VECTOR('',#45476,1.); +#45476 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#45477 = PLANE('',#45478); +#45478 = AXIS2_PLACEMENT_3D('',#45479,#45480,#45481); +#45479 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#45480 = DIRECTION('',(0.,0.,1.)); +#45481 = DIRECTION('',(0.334735188201,-0.942312237945,0.)); +#45482 = ADVANCED_FACE('',(#45483),#45500,.F.); +#45483 = FACE_BOUND('',#45484,.F.); +#45484 = EDGE_LOOP('',(#45485,#45486,#45493,#45499)); +#45485 = ORIENTED_EDGE('',*,*,#45424,.T.); +#45486 = ORIENTED_EDGE('',*,*,#45487,.T.); +#45487 = EDGE_CURVE('',#45425,#45488,#45490,.T.); +#45488 = VERTEX_POINT('',#45489); +#45489 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45490 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45491,#45492),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45491 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#45492 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45493 = ORIENTED_EDGE('',*,*,#45494,.F.); +#45494 = EDGE_CURVE('',#45396,#45488,#45495,.T.); +#45495 = LINE('',#45496,#45497); +#45496 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#45497 = VECTOR('',#45498,1.); +#45498 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#45499 = ORIENTED_EDGE('',*,*,#45395,.F.); +#45500 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45501,#45502) + ,(#45503,#45504 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#45501 = CARTESIAN_POINT('',(1.717585640382,4.835171280765,0.1)); +#45502 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#45503 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#45504 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45505 = ADVANCED_FACE('',(#45506),#45529,.F.); +#45506 = FACE_BOUND('',#45507,.F.); +#45507 = EDGE_LOOP('',(#45508,#45509,#45516,#45524)); +#45508 = ORIENTED_EDGE('',*,*,#45402,.T.); +#45509 = ORIENTED_EDGE('',*,*,#45510,.T.); +#45510 = EDGE_CURVE('',#45396,#45511,#45513,.T.); +#45511 = VERTEX_POINT('',#45512); +#45512 = CARTESIAN_POINT('',(1.775,4.95,1.025)); +#45513 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45514,#45515),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45514 = CARTESIAN_POINT('',(1.775,4.95,0.825)); +#45515 = CARTESIAN_POINT('',(1.775,4.95,1.025)); +#45516 = ORIENTED_EDGE('',*,*,#45517,.F.); +#45517 = EDGE_CURVE('',#45518,#45511,#45520,.T.); +#45518 = VERTEX_POINT('',#45519); +#45519 = CARTESIAN_POINT('',(-1.775,4.95,1.025)); +#45520 = LINE('',#45521,#45522); +#45521 = CARTESIAN_POINT('',(-1.775,4.95,1.025)); +#45522 = VECTOR('',#45523,1.); +#45523 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45524 = ORIENTED_EDGE('',*,*,#45525,.F.); +#45525 = EDGE_CURVE('',#45403,#45518,#45526,.T.); +#45526 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45527,#45528),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45527 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#45528 = CARTESIAN_POINT('',(-1.775,4.95,1.025)); +#45529 = PLANE('',#45530); +#45530 = AXIS2_PLACEMENT_3D('',#45531,#45532,#45533); +#45531 = CARTESIAN_POINT('',(-1.775,4.95,1.025)); +#45532 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45533 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45534 = ADVANCED_FACE('',(#45535),#45552,.F.); +#45535 = FACE_BOUND('',#45536,.F.); +#45536 = EDGE_LOOP('',(#45537,#45538,#45539,#45547)); +#45537 = ORIENTED_EDGE('',*,*,#45472,.T.); +#45538 = ORIENTED_EDGE('',*,*,#45410,.T.); +#45539 = ORIENTED_EDGE('',*,*,#45540,.F.); +#45540 = EDGE_CURVE('',#45541,#45403,#45543,.T.); +#45541 = VERTEX_POINT('',#45542); +#45542 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#45543 = LINE('',#45544,#45545); +#45544 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#45545 = VECTOR('',#45546,1.); +#45546 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#45547 = ORIENTED_EDGE('',*,*,#45548,.F.); +#45548 = EDGE_CURVE('',#45465,#45541,#45549,.T.); +#45549 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45550,#45551),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45550 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#45551 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#45552 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45553,#45554) + ,(#45555,#45556 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#45553 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#45554 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#45555 = CARTESIAN_POINT('',(-1.717585640382,4.835171280765,0.1)); +#45556 = CARTESIAN_POINT('',(-1.775,4.95,0.825)); +#45557 = ADVANCED_FACE('',(#45558),#45703,.F.); +#45558 = FACE_BOUND('',#45559,.F.); +#45559 = EDGE_LOOP('',(#45560,#45561,#45562,#45570,#45578,#45586,#45594, + #45602,#45610,#45618,#45626,#45634,#45642,#45650,#45658,#45666, + #45674,#45682,#45690,#45698)); +#45560 = ORIENTED_EDGE('',*,*,#45464,.T.); +#45561 = ORIENTED_EDGE('',*,*,#45548,.T.); +#45562 = ORIENTED_EDGE('',*,*,#45563,.F.); +#45563 = EDGE_CURVE('',#45564,#45541,#45566,.T.); +#45564 = VERTEX_POINT('',#45565); +#45565 = CARTESIAN_POINT('',(-1.95,4.65,0.825)); +#45566 = LINE('',#45567,#45568); +#45567 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45568 = VECTOR('',#45569,1.); +#45569 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45570 = ORIENTED_EDGE('',*,*,#45571,.F.); +#45571 = EDGE_CURVE('',#45572,#45564,#45574,.T.); +#45572 = VERTEX_POINT('',#45573); +#45573 = CARTESIAN_POINT('',(-1.95,4.24,0.825)); +#45574 = LINE('',#45575,#45576); +#45575 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45576 = VECTOR('',#45577,1.); +#45577 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45578 = ORIENTED_EDGE('',*,*,#45579,.F.); +#45579 = EDGE_CURVE('',#45580,#45572,#45582,.T.); +#45580 = VERTEX_POINT('',#45581); +#45581 = CARTESIAN_POINT('',(-1.95,3.38,0.825)); +#45582 = LINE('',#45583,#45584); +#45583 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45584 = VECTOR('',#45585,1.); +#45585 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45586 = ORIENTED_EDGE('',*,*,#45587,.F.); +#45587 = EDGE_CURVE('',#45588,#45580,#45590,.T.); +#45588 = VERTEX_POINT('',#45589); +#45589 = CARTESIAN_POINT('',(-1.95,2.97,0.825)); +#45590 = LINE('',#45591,#45592); +#45591 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45592 = VECTOR('',#45593,1.); +#45593 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45594 = ORIENTED_EDGE('',*,*,#45595,.F.); +#45595 = EDGE_CURVE('',#45596,#45588,#45598,.T.); +#45596 = VERTEX_POINT('',#45597); +#45597 = CARTESIAN_POINT('',(-1.95,2.11,0.825)); +#45598 = LINE('',#45599,#45600); +#45599 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45600 = VECTOR('',#45601,1.); +#45601 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45602 = ORIENTED_EDGE('',*,*,#45603,.F.); +#45603 = EDGE_CURVE('',#45604,#45596,#45606,.T.); +#45604 = VERTEX_POINT('',#45605); +#45605 = CARTESIAN_POINT('',(-1.95,1.7,0.825)); +#45606 = LINE('',#45607,#45608); +#45607 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45608 = VECTOR('',#45609,1.); +#45609 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45610 = ORIENTED_EDGE('',*,*,#45611,.F.); +#45611 = EDGE_CURVE('',#45612,#45604,#45614,.T.); +#45612 = VERTEX_POINT('',#45613); +#45613 = CARTESIAN_POINT('',(-1.95,0.84,0.825)); +#45614 = LINE('',#45615,#45616); +#45615 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45616 = VECTOR('',#45617,1.); +#45617 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45618 = ORIENTED_EDGE('',*,*,#45619,.F.); +#45619 = EDGE_CURVE('',#45620,#45612,#45622,.T.); +#45620 = VERTEX_POINT('',#45621); +#45621 = CARTESIAN_POINT('',(-1.95,0.43,0.825)); +#45622 = LINE('',#45623,#45624); +#45623 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45624 = VECTOR('',#45625,1.); +#45625 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45626 = ORIENTED_EDGE('',*,*,#45627,.F.); +#45627 = EDGE_CURVE('',#45628,#45620,#45630,.T.); +#45628 = VERTEX_POINT('',#45629); +#45629 = CARTESIAN_POINT('',(-1.95,-0.43,0.825)); +#45630 = LINE('',#45631,#45632); +#45631 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45632 = VECTOR('',#45633,1.); +#45633 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45634 = ORIENTED_EDGE('',*,*,#45635,.F.); +#45635 = EDGE_CURVE('',#45636,#45628,#45638,.T.); +#45636 = VERTEX_POINT('',#45637); +#45637 = CARTESIAN_POINT('',(-1.95,-0.84,0.825)); +#45638 = LINE('',#45639,#45640); +#45639 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45640 = VECTOR('',#45641,1.); +#45641 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45642 = ORIENTED_EDGE('',*,*,#45643,.F.); +#45643 = EDGE_CURVE('',#45644,#45636,#45646,.T.); +#45644 = VERTEX_POINT('',#45645); +#45645 = CARTESIAN_POINT('',(-1.95,-1.7,0.825)); +#45646 = LINE('',#45647,#45648); +#45647 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45648 = VECTOR('',#45649,1.); +#45649 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45650 = ORIENTED_EDGE('',*,*,#45651,.F.); +#45651 = EDGE_CURVE('',#45652,#45644,#45654,.T.); +#45652 = VERTEX_POINT('',#45653); +#45653 = CARTESIAN_POINT('',(-1.95,-2.11,0.825)); +#45654 = LINE('',#45655,#45656); +#45655 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45656 = VECTOR('',#45657,1.); +#45657 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45658 = ORIENTED_EDGE('',*,*,#45659,.F.); +#45659 = EDGE_CURVE('',#45660,#45652,#45662,.T.); +#45660 = VERTEX_POINT('',#45661); +#45661 = CARTESIAN_POINT('',(-1.95,-2.97,0.825)); +#45662 = LINE('',#45663,#45664); +#45663 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45664 = VECTOR('',#45665,1.); +#45665 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45666 = ORIENTED_EDGE('',*,*,#45667,.F.); +#45667 = EDGE_CURVE('',#45668,#45660,#45670,.T.); +#45668 = VERTEX_POINT('',#45669); +#45669 = CARTESIAN_POINT('',(-1.95,-3.38,0.825)); +#45670 = LINE('',#45671,#45672); +#45671 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45672 = VECTOR('',#45673,1.); +#45673 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45674 = ORIENTED_EDGE('',*,*,#45675,.F.); +#45675 = EDGE_CURVE('',#45676,#45668,#45678,.T.); +#45676 = VERTEX_POINT('',#45677); +#45677 = CARTESIAN_POINT('',(-1.95,-4.24,0.825)); +#45678 = LINE('',#45679,#45680); +#45679 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45680 = VECTOR('',#45681,1.); +#45681 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45682 = ORIENTED_EDGE('',*,*,#45683,.F.); +#45683 = EDGE_CURVE('',#45684,#45676,#45686,.T.); +#45684 = VERTEX_POINT('',#45685); +#45685 = CARTESIAN_POINT('',(-1.95,-4.65,0.825)); +#45686 = LINE('',#45687,#45688); +#45687 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45688 = VECTOR('',#45689,1.); +#45689 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45690 = ORIENTED_EDGE('',*,*,#45691,.F.); +#45691 = EDGE_CURVE('',#45692,#45684,#45694,.T.); +#45692 = VERTEX_POINT('',#45693); +#45693 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45694 = LINE('',#45695,#45696); +#45695 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45696 = VECTOR('',#45697,1.); +#45697 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#45698 = ORIENTED_EDGE('',*,*,#45699,.F.); +#45699 = EDGE_CURVE('',#45457,#45692,#45700,.T.); +#45700 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45701,#45702),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45701 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#45702 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45703 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45704,#45705) + ,(#45706,#45707 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#45704 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#45705 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45706 = CARTESIAN_POINT('',(-1.835171280765,4.717585640382,0.1)); +#45707 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#45708 = ADVANCED_FACE('',(#45709),#45854,.F.); +#45709 = FACE_BOUND('',#45710,.F.); +#45710 = EDGE_LOOP('',(#45711,#45712,#45719,#45727,#45735,#45743,#45751, + #45759,#45767,#45775,#45783,#45791,#45799,#45807,#45815,#45823, + #45831,#45839,#45847,#45853)); +#45711 = ORIENTED_EDGE('',*,*,#45432,.T.); +#45712 = ORIENTED_EDGE('',*,*,#45713,.T.); +#45713 = EDGE_CURVE('',#45433,#45714,#45716,.T.); +#45714 = VERTEX_POINT('',#45715); +#45715 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#45716 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45717,#45718),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45717 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#45718 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#45719 = ORIENTED_EDGE('',*,*,#45720,.F.); +#45720 = EDGE_CURVE('',#45721,#45714,#45723,.T.); +#45721 = VERTEX_POINT('',#45722); +#45722 = CARTESIAN_POINT('',(1.95,-4.65,0.825)); +#45723 = LINE('',#45724,#45725); +#45724 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45725 = VECTOR('',#45726,1.); +#45726 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45727 = ORIENTED_EDGE('',*,*,#45728,.F.); +#45728 = EDGE_CURVE('',#45729,#45721,#45731,.T.); +#45729 = VERTEX_POINT('',#45730); +#45730 = CARTESIAN_POINT('',(1.95,-4.24,0.825)); +#45731 = LINE('',#45732,#45733); +#45732 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45733 = VECTOR('',#45734,1.); +#45734 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45735 = ORIENTED_EDGE('',*,*,#45736,.F.); +#45736 = EDGE_CURVE('',#45737,#45729,#45739,.T.); +#45737 = VERTEX_POINT('',#45738); +#45738 = CARTESIAN_POINT('',(1.95,-3.38,0.825)); +#45739 = LINE('',#45740,#45741); +#45740 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45741 = VECTOR('',#45742,1.); +#45742 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45743 = ORIENTED_EDGE('',*,*,#45744,.F.); +#45744 = EDGE_CURVE('',#45745,#45737,#45747,.T.); +#45745 = VERTEX_POINT('',#45746); +#45746 = CARTESIAN_POINT('',(1.95,-2.97,0.825)); +#45747 = LINE('',#45748,#45749); +#45748 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45749 = VECTOR('',#45750,1.); +#45750 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45751 = ORIENTED_EDGE('',*,*,#45752,.F.); +#45752 = EDGE_CURVE('',#45753,#45745,#45755,.T.); +#45753 = VERTEX_POINT('',#45754); +#45754 = CARTESIAN_POINT('',(1.95,-2.11,0.825)); +#45755 = LINE('',#45756,#45757); +#45756 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45757 = VECTOR('',#45758,1.); +#45758 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45759 = ORIENTED_EDGE('',*,*,#45760,.F.); +#45760 = EDGE_CURVE('',#45761,#45753,#45763,.T.); +#45761 = VERTEX_POINT('',#45762); +#45762 = CARTESIAN_POINT('',(1.95,-1.7,0.825)); +#45763 = LINE('',#45764,#45765); +#45764 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45765 = VECTOR('',#45766,1.); +#45766 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45767 = ORIENTED_EDGE('',*,*,#45768,.F.); +#45768 = EDGE_CURVE('',#45769,#45761,#45771,.T.); +#45769 = VERTEX_POINT('',#45770); +#45770 = CARTESIAN_POINT('',(1.95,-0.84,0.825)); +#45771 = LINE('',#45772,#45773); +#45772 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45773 = VECTOR('',#45774,1.); +#45774 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45775 = ORIENTED_EDGE('',*,*,#45776,.F.); +#45776 = EDGE_CURVE('',#45777,#45769,#45779,.T.); +#45777 = VERTEX_POINT('',#45778); +#45778 = CARTESIAN_POINT('',(1.95,-0.43,0.825)); +#45779 = LINE('',#45780,#45781); +#45780 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45781 = VECTOR('',#45782,1.); +#45782 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45783 = ORIENTED_EDGE('',*,*,#45784,.F.); +#45784 = EDGE_CURVE('',#45785,#45777,#45787,.T.); +#45785 = VERTEX_POINT('',#45786); +#45786 = CARTESIAN_POINT('',(1.95,0.43,0.825)); +#45787 = LINE('',#45788,#45789); +#45788 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45789 = VECTOR('',#45790,1.); +#45790 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45791 = ORIENTED_EDGE('',*,*,#45792,.F.); +#45792 = EDGE_CURVE('',#45793,#45785,#45795,.T.); +#45793 = VERTEX_POINT('',#45794); +#45794 = CARTESIAN_POINT('',(1.95,0.84,0.825)); +#45795 = LINE('',#45796,#45797); +#45796 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45797 = VECTOR('',#45798,1.); +#45798 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45799 = ORIENTED_EDGE('',*,*,#45800,.F.); +#45800 = EDGE_CURVE('',#45801,#45793,#45803,.T.); +#45801 = VERTEX_POINT('',#45802); +#45802 = CARTESIAN_POINT('',(1.95,1.7,0.825)); +#45803 = LINE('',#45804,#45805); +#45804 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45805 = VECTOR('',#45806,1.); +#45806 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45807 = ORIENTED_EDGE('',*,*,#45808,.F.); +#45808 = EDGE_CURVE('',#45809,#45801,#45811,.T.); +#45809 = VERTEX_POINT('',#45810); +#45810 = CARTESIAN_POINT('',(1.95,2.11,0.825)); +#45811 = LINE('',#45812,#45813); +#45812 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45813 = VECTOR('',#45814,1.); +#45814 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45815 = ORIENTED_EDGE('',*,*,#45816,.F.); +#45816 = EDGE_CURVE('',#45817,#45809,#45819,.T.); +#45817 = VERTEX_POINT('',#45818); +#45818 = CARTESIAN_POINT('',(1.95,2.97,0.825)); +#45819 = LINE('',#45820,#45821); +#45820 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45821 = VECTOR('',#45822,1.); +#45822 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45823 = ORIENTED_EDGE('',*,*,#45824,.F.); +#45824 = EDGE_CURVE('',#45825,#45817,#45827,.T.); +#45825 = VERTEX_POINT('',#45826); +#45826 = CARTESIAN_POINT('',(1.95,3.38,0.825)); +#45827 = LINE('',#45828,#45829); +#45828 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45829 = VECTOR('',#45830,1.); +#45830 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45831 = ORIENTED_EDGE('',*,*,#45832,.F.); +#45832 = EDGE_CURVE('',#45833,#45825,#45835,.T.); +#45833 = VERTEX_POINT('',#45834); +#45834 = CARTESIAN_POINT('',(1.95,4.24,0.825)); +#45835 = LINE('',#45836,#45837); +#45836 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45837 = VECTOR('',#45838,1.); +#45838 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45839 = ORIENTED_EDGE('',*,*,#45840,.F.); +#45840 = EDGE_CURVE('',#45841,#45833,#45843,.T.); +#45841 = VERTEX_POINT('',#45842); +#45842 = CARTESIAN_POINT('',(1.95,4.65,0.825)); +#45843 = LINE('',#45844,#45845); +#45844 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45845 = VECTOR('',#45846,1.); +#45846 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45847 = ORIENTED_EDGE('',*,*,#45848,.F.); +#45848 = EDGE_CURVE('',#45488,#45841,#45849,.T.); +#45849 = LINE('',#45850,#45851); +#45850 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45851 = VECTOR('',#45852,1.); +#45852 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45853 = ORIENTED_EDGE('',*,*,#45487,.F.); +#45854 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45855,#45856) + ,(#45857,#45858 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#45855 = CARTESIAN_POINT('',(1.835171280765,4.717585640382,0.1)); +#45856 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45857 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#45858 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#45859 = ADVANCED_FACE('',(#45860),#45877,.F.); +#45860 = FACE_BOUND('',#45861,.F.); +#45861 = EDGE_LOOP('',(#45862,#45863,#45864,#45872)); +#45862 = ORIENTED_EDGE('',*,*,#45456,.T.); +#45863 = ORIENTED_EDGE('',*,*,#45699,.T.); +#45864 = ORIENTED_EDGE('',*,*,#45865,.F.); +#45865 = EDGE_CURVE('',#45866,#45692,#45868,.T.); +#45866 = VERTEX_POINT('',#45867); +#45867 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#45868 = LINE('',#45869,#45870); +#45869 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#45870 = VECTOR('',#45871,1.); +#45871 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#45872 = ORIENTED_EDGE('',*,*,#45873,.F.); +#45873 = EDGE_CURVE('',#45449,#45866,#45874,.T.); +#45874 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45875,#45876),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45875 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#45876 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#45877 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45878,#45879) + ,(#45880,#45881 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#45878 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#45879 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#45880 = CARTESIAN_POINT('',(-1.835171280765,-4.717585640382,0.1)); +#45881 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#45882 = ADVANCED_FACE('',(#45883),#45900,.F.); +#45883 = FACE_BOUND('',#45884,.F.); +#45884 = EDGE_LOOP('',(#45885,#45886,#45893,#45899)); +#45885 = ORIENTED_EDGE('',*,*,#45440,.T.); +#45886 = ORIENTED_EDGE('',*,*,#45887,.T.); +#45887 = EDGE_CURVE('',#45441,#45888,#45890,.T.); +#45888 = VERTEX_POINT('',#45889); +#45889 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#45890 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45891,#45892),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45891 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#45892 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#45893 = ORIENTED_EDGE('',*,*,#45894,.F.); +#45894 = EDGE_CURVE('',#45714,#45888,#45895,.T.); +#45895 = LINE('',#45896,#45897); +#45896 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#45897 = VECTOR('',#45898,1.); +#45898 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#45899 = ORIENTED_EDGE('',*,*,#45713,.F.); +#45900 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45901,#45902) + ,(#45903,#45904 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#45901 = CARTESIAN_POINT('',(1.835171280765,-4.717585640382,0.1)); +#45902 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#45903 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#45904 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#45905 = ADVANCED_FACE('',(#45906),#45917,.F.); +#45906 = FACE_BOUND('',#45907,.F.); +#45907 = EDGE_LOOP('',(#45908,#45909,#45910,#45916)); +#45908 = ORIENTED_EDGE('',*,*,#45448,.T.); +#45909 = ORIENTED_EDGE('',*,*,#45873,.T.); +#45910 = ORIENTED_EDGE('',*,*,#45911,.F.); +#45911 = EDGE_CURVE('',#45888,#45866,#45912,.T.); +#45912 = LINE('',#45913,#45914); +#45913 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#45914 = VECTOR('',#45915,1.); +#45915 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45916 = ORIENTED_EDGE('',*,*,#45887,.F.); +#45917 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#45918,#45919) + ,(#45920,#45921 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#45918 = CARTESIAN_POINT('',(1.717585640382,-4.835171280765,0.1)); +#45919 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#45920 = CARTESIAN_POINT('',(-1.717585640382,-4.835171280765,0.1)); +#45921 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#45922 = ADVANCED_FACE('',(#45923),#45940,.F.); +#45923 = FACE_BOUND('',#45924,.F.); +#45924 = EDGE_LOOP('',(#45925,#45926,#45933,#45939)); +#45925 = ORIENTED_EDGE('',*,*,#45494,.T.); +#45926 = ORIENTED_EDGE('',*,*,#45927,.T.); +#45927 = EDGE_CURVE('',#45488,#45928,#45930,.T.); +#45928 = VERTEX_POINT('',#45929); +#45929 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45930 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#45931,#45932),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#45931 = CARTESIAN_POINT('',(1.95,4.775,0.825)); +#45932 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45933 = ORIENTED_EDGE('',*,*,#45934,.F.); +#45934 = EDGE_CURVE('',#45511,#45928,#45935,.T.); +#45935 = LINE('',#45936,#45937); +#45936 = CARTESIAN_POINT('',(1.775,4.95,1.025)); +#45937 = VECTOR('',#45938,1.); +#45938 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#45939 = ORIENTED_EDGE('',*,*,#45510,.F.); +#45940 = PLANE('',#45941); +#45941 = AXIS2_PLACEMENT_3D('',#45942,#45943,#45944); +#45942 = CARTESIAN_POINT('',(1.775,4.95,1.025)); +#45943 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#45944 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#45945 = ADVANCED_FACE('',(#45946),#46028,.F.); +#45946 = FACE_BOUND('',#45947,.F.); +#45947 = EDGE_LOOP('',(#45948,#45956,#45957,#45958,#45966,#45974,#45982, + #45990,#45998,#46006,#46014,#46022)); +#45948 = ORIENTED_EDGE('',*,*,#45949,.T.); +#45949 = EDGE_CURVE('',#45950,#45518,#45952,.T.); +#45950 = VERTEX_POINT('',#45951); +#45951 = CARTESIAN_POINT('',(-1.95,4.775,1.025)); +#45952 = LINE('',#45953,#45954); +#45953 = CARTESIAN_POINT('',(-1.95,4.775,1.025)); +#45954 = VECTOR('',#45955,1.); +#45955 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#45956 = ORIENTED_EDGE('',*,*,#45517,.T.); +#45957 = ORIENTED_EDGE('',*,*,#45934,.T.); +#45958 = ORIENTED_EDGE('',*,*,#45959,.T.); +#45959 = EDGE_CURVE('',#45928,#45960,#45962,.T.); +#45960 = VERTEX_POINT('',#45961); +#45961 = CARTESIAN_POINT('',(1.95,4.65,1.025)); +#45962 = LINE('',#45963,#45964); +#45963 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#45964 = VECTOR('',#45965,1.); +#45965 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45966 = ORIENTED_EDGE('',*,*,#45967,.T.); +#45967 = EDGE_CURVE('',#45960,#45968,#45970,.T.); +#45968 = VERTEX_POINT('',#45969); +#45969 = CARTESIAN_POINT('',(1.875,4.65,1.025)); +#45970 = LINE('',#45971,#45972); +#45971 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#45972 = VECTOR('',#45973,1.); +#45973 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#45974 = ORIENTED_EDGE('',*,*,#45975,.F.); +#45975 = EDGE_CURVE('',#45976,#45968,#45978,.T.); +#45976 = VERTEX_POINT('',#45977); +#45977 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45978 = LINE('',#45979,#45980); +#45979 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#45980 = VECTOR('',#45981,1.); +#45981 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#45982 = ORIENTED_EDGE('',*,*,#45983,.F.); +#45983 = EDGE_CURVE('',#45984,#45976,#45986,.T.); +#45984 = VERTEX_POINT('',#45985); +#45985 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#45986 = LINE('',#45987,#45988); +#45987 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#45988 = VECTOR('',#45989,1.); +#45989 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#45990 = ORIENTED_EDGE('',*,*,#45991,.F.); +#45991 = EDGE_CURVE('',#45992,#45984,#45994,.T.); +#45992 = VERTEX_POINT('',#45993); +#45993 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#45994 = LINE('',#45995,#45996); +#45995 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#45996 = VECTOR('',#45997,1.); +#45997 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#45998 = ORIENTED_EDGE('',*,*,#45999,.F.); +#45999 = EDGE_CURVE('',#46000,#45992,#46002,.T.); +#46000 = VERTEX_POINT('',#46001); +#46001 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#46002 = LINE('',#46003,#46004); +#46003 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#46004 = VECTOR('',#46005,1.); +#46005 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#46006 = ORIENTED_EDGE('',*,*,#46007,.F.); +#46007 = EDGE_CURVE('',#46008,#46000,#46010,.T.); +#46008 = VERTEX_POINT('',#46009); +#46009 = CARTESIAN_POINT('',(-1.875,4.65,1.025)); +#46010 = LINE('',#46011,#46012); +#46011 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#46012 = VECTOR('',#46013,1.); +#46013 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46014 = ORIENTED_EDGE('',*,*,#46015,.F.); +#46015 = EDGE_CURVE('',#46016,#46008,#46018,.T.); +#46016 = VERTEX_POINT('',#46017); +#46017 = CARTESIAN_POINT('',(-1.95,4.65,1.025)); +#46018 = LINE('',#46019,#46020); +#46019 = CARTESIAN_POINT('',(-2.2,4.65,1.025)); +#46020 = VECTOR('',#46021,1.); +#46021 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#46022 = ORIENTED_EDGE('',*,*,#46023,.T.); +#46023 = EDGE_CURVE('',#46016,#45950,#46024,.T.); +#46024 = LINE('',#46025,#46026); +#46025 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46026 = VECTOR('',#46027,1.); +#46027 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46028 = PLANE('',#46029); +#46029 = AXIS2_PLACEMENT_3D('',#46030,#46031,#46032); +#46030 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#46031 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#46032 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#46033 = ADVANCED_FACE('',(#46034),#46044,.F.); +#46034 = FACE_BOUND('',#46035,.F.); +#46035 = EDGE_LOOP('',(#46036,#46037,#46038,#46039)); +#46036 = ORIENTED_EDGE('',*,*,#45540,.T.); +#46037 = ORIENTED_EDGE('',*,*,#45525,.T.); +#46038 = ORIENTED_EDGE('',*,*,#45949,.F.); +#46039 = ORIENTED_EDGE('',*,*,#46040,.F.); +#46040 = EDGE_CURVE('',#45541,#45950,#46041,.T.); +#46041 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#46042,#46043),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#46042 = CARTESIAN_POINT('',(-1.95,4.775,0.825)); +#46043 = CARTESIAN_POINT('',(-1.95,4.775,1.025)); +#46044 = PLANE('',#46045); +#46045 = AXIS2_PLACEMENT_3D('',#46046,#46047,#46048); +#46046 = CARTESIAN_POINT('',(-1.95,4.775,1.025)); +#46047 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#46048 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#46049 = ADVANCED_FACE('',(#46050),#46074,.F.); +#46050 = FACE_BOUND('',#46051,.F.); +#46051 = EDGE_LOOP('',(#46052,#46059,#46060,#46068)); +#46052 = ORIENTED_EDGE('',*,*,#46053,.F.); +#46053 = EDGE_CURVE('',#45692,#46054,#46056,.T.); +#46054 = VERTEX_POINT('',#46055); +#46055 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46056 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#46057,#46058),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#46057 = CARTESIAN_POINT('',(-1.95,-4.775,0.825)); +#46058 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46059 = ORIENTED_EDGE('',*,*,#45691,.T.); +#46060 = ORIENTED_EDGE('',*,*,#46061,.T.); +#46061 = EDGE_CURVE('',#45684,#46062,#46064,.T.); +#46062 = VERTEX_POINT('',#46063); +#46063 = CARTESIAN_POINT('',(-1.95,-4.65,1.025)); +#46064 = LINE('',#46065,#46066); +#46065 = CARTESIAN_POINT('',(-1.95,-4.65,0.776557752994)); +#46066 = VECTOR('',#46067,1.); +#46067 = DIRECTION('',(0.,0.,1.)); +#46068 = ORIENTED_EDGE('',*,*,#46069,.F.); +#46069 = EDGE_CURVE('',#46054,#46062,#46070,.T.); +#46070 = LINE('',#46071,#46072); +#46071 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46072 = VECTOR('',#46073,1.); +#46073 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46074 = PLANE('',#46075); +#46075 = AXIS2_PLACEMENT_3D('',#46076,#46077,#46078); +#46076 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46077 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46078 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46079 = ADVANCED_FACE('',(#46080),#46105,.F.); +#46080 = FACE_BOUND('',#46081,.F.); +#46081 = EDGE_LOOP('',(#46082,#46090,#46091,#46099)); +#46082 = ORIENTED_EDGE('',*,*,#46083,.F.); +#46083 = EDGE_CURVE('',#45684,#46084,#46086,.T.); +#46084 = VERTEX_POINT('',#46085); +#46085 = CARTESIAN_POINT('',(-2.2,-4.65,0.825)); +#46086 = LINE('',#46087,#46088); +#46087 = CARTESIAN_POINT('',(-1.8,-4.65,0.825)); +#46088 = VECTOR('',#46089,1.); +#46089 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46090 = ORIENTED_EDGE('',*,*,#45683,.T.); +#46091 = ORIENTED_EDGE('',*,*,#46092,.T.); +#46092 = EDGE_CURVE('',#45676,#46093,#46095,.T.); +#46093 = VERTEX_POINT('',#46094); +#46094 = CARTESIAN_POINT('',(-2.2,-4.24,0.825)); +#46095 = LINE('',#46096,#46097); +#46096 = CARTESIAN_POINT('',(-1.8,-4.24,0.825)); +#46097 = VECTOR('',#46098,1.); +#46098 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46099 = ORIENTED_EDGE('',*,*,#46100,.F.); +#46100 = EDGE_CURVE('',#46084,#46093,#46101,.T.); +#46101 = LINE('',#46102,#46103); +#46102 = CARTESIAN_POINT('',(-2.2,-4.65,0.825)); +#46103 = VECTOR('',#46104,1.); +#46104 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46105 = PLANE('',#46106); +#46106 = AXIS2_PLACEMENT_3D('',#46107,#46108,#46109); +#46107 = CARTESIAN_POINT('',(-1.8,-4.65,0.825)); +#46108 = DIRECTION('',(0.,0.,1.)); +#46109 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46110 = ADVANCED_FACE('',(#46111),#46136,.F.); +#46111 = FACE_BOUND('',#46112,.F.); +#46112 = EDGE_LOOP('',(#46113,#46121,#46122,#46130)); +#46113 = ORIENTED_EDGE('',*,*,#46114,.F.); +#46114 = EDGE_CURVE('',#45676,#46115,#46117,.T.); +#46115 = VERTEX_POINT('',#46116); +#46116 = CARTESIAN_POINT('',(-1.95,-4.24,1.025)); +#46117 = LINE('',#46118,#46119); +#46118 = CARTESIAN_POINT('',(-1.95,-4.24,0.776557752994)); +#46119 = VECTOR('',#46120,1.); +#46120 = DIRECTION('',(0.,0.,1.)); +#46121 = ORIENTED_EDGE('',*,*,#45675,.T.); +#46122 = ORIENTED_EDGE('',*,*,#46123,.T.); +#46123 = EDGE_CURVE('',#45668,#46124,#46126,.T.); +#46124 = VERTEX_POINT('',#46125); +#46125 = CARTESIAN_POINT('',(-1.95,-3.38,1.025)); +#46126 = LINE('',#46127,#46128); +#46127 = CARTESIAN_POINT('',(-1.95,-3.38,0.776557752994)); +#46128 = VECTOR('',#46129,1.); +#46129 = DIRECTION('',(0.,0.,1.)); +#46130 = ORIENTED_EDGE('',*,*,#46131,.F.); +#46131 = EDGE_CURVE('',#46115,#46124,#46132,.T.); +#46132 = LINE('',#46133,#46134); +#46133 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46134 = VECTOR('',#46135,1.); +#46135 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46136 = PLANE('',#46137); +#46137 = AXIS2_PLACEMENT_3D('',#46138,#46139,#46140); +#46138 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46139 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46140 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46141 = ADVANCED_FACE('',(#46142),#46167,.F.); +#46142 = FACE_BOUND('',#46143,.F.); +#46143 = EDGE_LOOP('',(#46144,#46152,#46153,#46161)); +#46144 = ORIENTED_EDGE('',*,*,#46145,.F.); +#46145 = EDGE_CURVE('',#45668,#46146,#46148,.T.); +#46146 = VERTEX_POINT('',#46147); +#46147 = CARTESIAN_POINT('',(-2.2,-3.38,0.825)); +#46148 = LINE('',#46149,#46150); +#46149 = CARTESIAN_POINT('',(-1.8,-3.38,0.825)); +#46150 = VECTOR('',#46151,1.); +#46151 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46152 = ORIENTED_EDGE('',*,*,#45667,.T.); +#46153 = ORIENTED_EDGE('',*,*,#46154,.T.); +#46154 = EDGE_CURVE('',#45660,#46155,#46157,.T.); +#46155 = VERTEX_POINT('',#46156); +#46156 = CARTESIAN_POINT('',(-2.2,-2.97,0.825)); +#46157 = LINE('',#46158,#46159); +#46158 = CARTESIAN_POINT('',(-1.8,-2.97,0.825)); +#46159 = VECTOR('',#46160,1.); +#46160 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46161 = ORIENTED_EDGE('',*,*,#46162,.F.); +#46162 = EDGE_CURVE('',#46146,#46155,#46163,.T.); +#46163 = LINE('',#46164,#46165); +#46164 = CARTESIAN_POINT('',(-2.2,-3.38,0.825)); +#46165 = VECTOR('',#46166,1.); +#46166 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46167 = PLANE('',#46168); +#46168 = AXIS2_PLACEMENT_3D('',#46169,#46170,#46171); +#46169 = CARTESIAN_POINT('',(-1.8,-3.38,0.825)); +#46170 = DIRECTION('',(0.,0.,1.)); +#46171 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46172 = ADVANCED_FACE('',(#46173),#46198,.F.); +#46173 = FACE_BOUND('',#46174,.F.); +#46174 = EDGE_LOOP('',(#46175,#46183,#46184,#46192)); +#46175 = ORIENTED_EDGE('',*,*,#46176,.F.); +#46176 = EDGE_CURVE('',#45660,#46177,#46179,.T.); +#46177 = VERTEX_POINT('',#46178); +#46178 = CARTESIAN_POINT('',(-1.95,-2.97,1.025)); +#46179 = LINE('',#46180,#46181); +#46180 = CARTESIAN_POINT('',(-1.95,-2.97,0.776557752994)); +#46181 = VECTOR('',#46182,1.); +#46182 = DIRECTION('',(0.,0.,1.)); +#46183 = ORIENTED_EDGE('',*,*,#45659,.T.); +#46184 = ORIENTED_EDGE('',*,*,#46185,.T.); +#46185 = EDGE_CURVE('',#45652,#46186,#46188,.T.); +#46186 = VERTEX_POINT('',#46187); +#46187 = CARTESIAN_POINT('',(-1.95,-2.11,1.025)); +#46188 = LINE('',#46189,#46190); +#46189 = CARTESIAN_POINT('',(-1.95,-2.11,0.776557752994)); +#46190 = VECTOR('',#46191,1.); +#46191 = DIRECTION('',(0.,0.,1.)); +#46192 = ORIENTED_EDGE('',*,*,#46193,.F.); +#46193 = EDGE_CURVE('',#46177,#46186,#46194,.T.); +#46194 = LINE('',#46195,#46196); +#46195 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46196 = VECTOR('',#46197,1.); +#46197 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46198 = PLANE('',#46199); +#46199 = AXIS2_PLACEMENT_3D('',#46200,#46201,#46202); +#46200 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46201 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46202 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46203 = ADVANCED_FACE('',(#46204),#46229,.F.); +#46204 = FACE_BOUND('',#46205,.F.); +#46205 = EDGE_LOOP('',(#46206,#46214,#46215,#46223)); +#46206 = ORIENTED_EDGE('',*,*,#46207,.F.); +#46207 = EDGE_CURVE('',#45652,#46208,#46210,.T.); +#46208 = VERTEX_POINT('',#46209); +#46209 = CARTESIAN_POINT('',(-2.2,-2.11,0.825)); +#46210 = LINE('',#46211,#46212); +#46211 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#46212 = VECTOR('',#46213,1.); +#46213 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46214 = ORIENTED_EDGE('',*,*,#45651,.T.); +#46215 = ORIENTED_EDGE('',*,*,#46216,.T.); +#46216 = EDGE_CURVE('',#45644,#46217,#46219,.T.); +#46217 = VERTEX_POINT('',#46218); +#46218 = CARTESIAN_POINT('',(-2.2,-1.7,0.825)); +#46219 = LINE('',#46220,#46221); +#46220 = CARTESIAN_POINT('',(-1.8,-1.7,0.825)); +#46221 = VECTOR('',#46222,1.); +#46222 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46223 = ORIENTED_EDGE('',*,*,#46224,.F.); +#46224 = EDGE_CURVE('',#46208,#46217,#46225,.T.); +#46225 = LINE('',#46226,#46227); +#46226 = CARTESIAN_POINT('',(-2.2,-2.11,0.825)); +#46227 = VECTOR('',#46228,1.); +#46228 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46229 = PLANE('',#46230); +#46230 = AXIS2_PLACEMENT_3D('',#46231,#46232,#46233); +#46231 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#46232 = DIRECTION('',(0.,0.,1.)); +#46233 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46234 = ADVANCED_FACE('',(#46235),#46260,.F.); +#46235 = FACE_BOUND('',#46236,.F.); +#46236 = EDGE_LOOP('',(#46237,#46245,#46246,#46254)); +#46237 = ORIENTED_EDGE('',*,*,#46238,.F.); +#46238 = EDGE_CURVE('',#45644,#46239,#46241,.T.); +#46239 = VERTEX_POINT('',#46240); +#46240 = CARTESIAN_POINT('',(-1.95,-1.7,1.025)); +#46241 = LINE('',#46242,#46243); +#46242 = CARTESIAN_POINT('',(-1.95,-1.7,0.776557752994)); +#46243 = VECTOR('',#46244,1.); +#46244 = DIRECTION('',(0.,0.,1.)); +#46245 = ORIENTED_EDGE('',*,*,#45643,.T.); +#46246 = ORIENTED_EDGE('',*,*,#46247,.T.); +#46247 = EDGE_CURVE('',#45636,#46248,#46250,.T.); +#46248 = VERTEX_POINT('',#46249); +#46249 = CARTESIAN_POINT('',(-1.95,-0.84,1.025)); +#46250 = LINE('',#46251,#46252); +#46251 = CARTESIAN_POINT('',(-1.95,-0.84,0.776557752994)); +#46252 = VECTOR('',#46253,1.); +#46253 = DIRECTION('',(0.,0.,1.)); +#46254 = ORIENTED_EDGE('',*,*,#46255,.F.); +#46255 = EDGE_CURVE('',#46239,#46248,#46256,.T.); +#46256 = LINE('',#46257,#46258); +#46257 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46258 = VECTOR('',#46259,1.); +#46259 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46260 = PLANE('',#46261); +#46261 = AXIS2_PLACEMENT_3D('',#46262,#46263,#46264); +#46262 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46263 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46264 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46265 = ADVANCED_FACE('',(#46266),#46291,.F.); +#46266 = FACE_BOUND('',#46267,.F.); +#46267 = EDGE_LOOP('',(#46268,#46276,#46277,#46285)); +#46268 = ORIENTED_EDGE('',*,*,#46269,.F.); +#46269 = EDGE_CURVE('',#45636,#46270,#46272,.T.); +#46270 = VERTEX_POINT('',#46271); +#46271 = CARTESIAN_POINT('',(-2.2,-0.84,0.825)); +#46272 = LINE('',#46273,#46274); +#46273 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#46274 = VECTOR('',#46275,1.); +#46275 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46276 = ORIENTED_EDGE('',*,*,#45635,.T.); +#46277 = ORIENTED_EDGE('',*,*,#46278,.T.); +#46278 = EDGE_CURVE('',#45628,#46279,#46281,.T.); +#46279 = VERTEX_POINT('',#46280); +#46280 = CARTESIAN_POINT('',(-2.2,-0.43,0.825)); +#46281 = LINE('',#46282,#46283); +#46282 = CARTESIAN_POINT('',(-1.8,-0.43,0.825)); +#46283 = VECTOR('',#46284,1.); +#46284 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46285 = ORIENTED_EDGE('',*,*,#46286,.F.); +#46286 = EDGE_CURVE('',#46270,#46279,#46287,.T.); +#46287 = LINE('',#46288,#46289); +#46288 = CARTESIAN_POINT('',(-2.2,-0.84,0.825)); +#46289 = VECTOR('',#46290,1.); +#46290 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46291 = PLANE('',#46292); +#46292 = AXIS2_PLACEMENT_3D('',#46293,#46294,#46295); +#46293 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#46294 = DIRECTION('',(0.,0.,1.)); +#46295 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46296 = ADVANCED_FACE('',(#46297),#46322,.F.); +#46297 = FACE_BOUND('',#46298,.F.); +#46298 = EDGE_LOOP('',(#46299,#46307,#46308,#46316)); +#46299 = ORIENTED_EDGE('',*,*,#46300,.F.); +#46300 = EDGE_CURVE('',#45628,#46301,#46303,.T.); +#46301 = VERTEX_POINT('',#46302); +#46302 = CARTESIAN_POINT('',(-1.95,-0.43,1.025)); +#46303 = LINE('',#46304,#46305); +#46304 = CARTESIAN_POINT('',(-1.95,-0.43,0.776557752994)); +#46305 = VECTOR('',#46306,1.); +#46306 = DIRECTION('',(0.,0.,1.)); +#46307 = ORIENTED_EDGE('',*,*,#45627,.T.); +#46308 = ORIENTED_EDGE('',*,*,#46309,.T.); +#46309 = EDGE_CURVE('',#45620,#46310,#46312,.T.); +#46310 = VERTEX_POINT('',#46311); +#46311 = CARTESIAN_POINT('',(-1.95,0.43,1.025)); +#46312 = LINE('',#46313,#46314); +#46313 = CARTESIAN_POINT('',(-1.95,0.43,0.776557752994)); +#46314 = VECTOR('',#46315,1.); +#46315 = DIRECTION('',(0.,0.,1.)); +#46316 = ORIENTED_EDGE('',*,*,#46317,.F.); +#46317 = EDGE_CURVE('',#46301,#46310,#46318,.T.); +#46318 = LINE('',#46319,#46320); +#46319 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46320 = VECTOR('',#46321,1.); +#46321 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46322 = PLANE('',#46323); +#46323 = AXIS2_PLACEMENT_3D('',#46324,#46325,#46326); +#46324 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46325 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46326 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46327 = ADVANCED_FACE('',(#46328),#46353,.F.); +#46328 = FACE_BOUND('',#46329,.F.); +#46329 = EDGE_LOOP('',(#46330,#46338,#46339,#46347)); +#46330 = ORIENTED_EDGE('',*,*,#46331,.F.); +#46331 = EDGE_CURVE('',#45620,#46332,#46334,.T.); +#46332 = VERTEX_POINT('',#46333); +#46333 = CARTESIAN_POINT('',(-2.2,0.43,0.825)); +#46334 = LINE('',#46335,#46336); +#46335 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#46336 = VECTOR('',#46337,1.); +#46337 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46338 = ORIENTED_EDGE('',*,*,#45619,.T.); +#46339 = ORIENTED_EDGE('',*,*,#46340,.T.); +#46340 = EDGE_CURVE('',#45612,#46341,#46343,.T.); +#46341 = VERTEX_POINT('',#46342); +#46342 = CARTESIAN_POINT('',(-2.2,0.84,0.825)); +#46343 = LINE('',#46344,#46345); +#46344 = CARTESIAN_POINT('',(-1.8,0.84,0.825)); +#46345 = VECTOR('',#46346,1.); +#46346 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46347 = ORIENTED_EDGE('',*,*,#46348,.F.); +#46348 = EDGE_CURVE('',#46332,#46341,#46349,.T.); +#46349 = LINE('',#46350,#46351); +#46350 = CARTESIAN_POINT('',(-2.2,0.43,0.825)); +#46351 = VECTOR('',#46352,1.); +#46352 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46353 = PLANE('',#46354); +#46354 = AXIS2_PLACEMENT_3D('',#46355,#46356,#46357); +#46355 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#46356 = DIRECTION('',(0.,0.,1.)); +#46357 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46358 = ADVANCED_FACE('',(#46359),#46384,.F.); +#46359 = FACE_BOUND('',#46360,.F.); +#46360 = EDGE_LOOP('',(#46361,#46369,#46370,#46378)); +#46361 = ORIENTED_EDGE('',*,*,#46362,.F.); +#46362 = EDGE_CURVE('',#45612,#46363,#46365,.T.); +#46363 = VERTEX_POINT('',#46364); +#46364 = CARTESIAN_POINT('',(-1.95,0.84,1.025)); +#46365 = LINE('',#46366,#46367); +#46366 = CARTESIAN_POINT('',(-1.95,0.84,0.776557752994)); +#46367 = VECTOR('',#46368,1.); +#46368 = DIRECTION('',(0.,0.,1.)); +#46369 = ORIENTED_EDGE('',*,*,#45611,.T.); +#46370 = ORIENTED_EDGE('',*,*,#46371,.T.); +#46371 = EDGE_CURVE('',#45604,#46372,#46374,.T.); +#46372 = VERTEX_POINT('',#46373); +#46373 = CARTESIAN_POINT('',(-1.95,1.7,1.025)); +#46374 = LINE('',#46375,#46376); +#46375 = CARTESIAN_POINT('',(-1.95,1.7,0.776557752994)); +#46376 = VECTOR('',#46377,1.); +#46377 = DIRECTION('',(0.,0.,1.)); +#46378 = ORIENTED_EDGE('',*,*,#46379,.F.); +#46379 = EDGE_CURVE('',#46363,#46372,#46380,.T.); +#46380 = LINE('',#46381,#46382); +#46381 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46382 = VECTOR('',#46383,1.); +#46383 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46384 = PLANE('',#46385); +#46385 = AXIS2_PLACEMENT_3D('',#46386,#46387,#46388); +#46386 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46387 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46388 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46389 = ADVANCED_FACE('',(#46390),#46415,.F.); +#46390 = FACE_BOUND('',#46391,.F.); +#46391 = EDGE_LOOP('',(#46392,#46400,#46401,#46409)); +#46392 = ORIENTED_EDGE('',*,*,#46393,.F.); +#46393 = EDGE_CURVE('',#45604,#46394,#46396,.T.); +#46394 = VERTEX_POINT('',#46395); +#46395 = CARTESIAN_POINT('',(-2.2,1.7,0.825)); +#46396 = LINE('',#46397,#46398); +#46397 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#46398 = VECTOR('',#46399,1.); +#46399 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46400 = ORIENTED_EDGE('',*,*,#45603,.T.); +#46401 = ORIENTED_EDGE('',*,*,#46402,.T.); +#46402 = EDGE_CURVE('',#45596,#46403,#46405,.T.); +#46403 = VERTEX_POINT('',#46404); +#46404 = CARTESIAN_POINT('',(-2.2,2.11,0.825)); +#46405 = LINE('',#46406,#46407); +#46406 = CARTESIAN_POINT('',(-1.8,2.11,0.825)); +#46407 = VECTOR('',#46408,1.); +#46408 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46409 = ORIENTED_EDGE('',*,*,#46410,.F.); +#46410 = EDGE_CURVE('',#46394,#46403,#46411,.T.); +#46411 = LINE('',#46412,#46413); +#46412 = CARTESIAN_POINT('',(-2.2,1.7,0.825)); +#46413 = VECTOR('',#46414,1.); +#46414 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46415 = PLANE('',#46416); +#46416 = AXIS2_PLACEMENT_3D('',#46417,#46418,#46419); +#46417 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#46418 = DIRECTION('',(0.,0.,1.)); +#46419 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46420 = ADVANCED_FACE('',(#46421),#46446,.F.); +#46421 = FACE_BOUND('',#46422,.F.); +#46422 = EDGE_LOOP('',(#46423,#46431,#46432,#46440)); +#46423 = ORIENTED_EDGE('',*,*,#46424,.F.); +#46424 = EDGE_CURVE('',#45596,#46425,#46427,.T.); +#46425 = VERTEX_POINT('',#46426); +#46426 = CARTESIAN_POINT('',(-1.95,2.11,1.025)); +#46427 = LINE('',#46428,#46429); +#46428 = CARTESIAN_POINT('',(-1.95,2.11,0.776557752994)); +#46429 = VECTOR('',#46430,1.); +#46430 = DIRECTION('',(0.,0.,1.)); +#46431 = ORIENTED_EDGE('',*,*,#45595,.T.); +#46432 = ORIENTED_EDGE('',*,*,#46433,.T.); +#46433 = EDGE_CURVE('',#45588,#46434,#46436,.T.); +#46434 = VERTEX_POINT('',#46435); +#46435 = CARTESIAN_POINT('',(-1.95,2.97,1.025)); +#46436 = LINE('',#46437,#46438); +#46437 = CARTESIAN_POINT('',(-1.95,2.97,0.776557752994)); +#46438 = VECTOR('',#46439,1.); +#46439 = DIRECTION('',(0.,0.,1.)); +#46440 = ORIENTED_EDGE('',*,*,#46441,.F.); +#46441 = EDGE_CURVE('',#46425,#46434,#46442,.T.); +#46442 = LINE('',#46443,#46444); +#46443 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46444 = VECTOR('',#46445,1.); +#46445 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46446 = PLANE('',#46447); +#46447 = AXIS2_PLACEMENT_3D('',#46448,#46449,#46450); +#46448 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46449 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46450 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46451 = ADVANCED_FACE('',(#46452),#46477,.F.); +#46452 = FACE_BOUND('',#46453,.F.); +#46453 = EDGE_LOOP('',(#46454,#46462,#46463,#46471)); +#46454 = ORIENTED_EDGE('',*,*,#46455,.F.); +#46455 = EDGE_CURVE('',#45588,#46456,#46458,.T.); +#46456 = VERTEX_POINT('',#46457); +#46457 = CARTESIAN_POINT('',(-2.2,2.97,0.825)); +#46458 = LINE('',#46459,#46460); +#46459 = CARTESIAN_POINT('',(-1.8,2.97,0.825)); +#46460 = VECTOR('',#46461,1.); +#46461 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46462 = ORIENTED_EDGE('',*,*,#45587,.T.); +#46463 = ORIENTED_EDGE('',*,*,#46464,.T.); +#46464 = EDGE_CURVE('',#45580,#46465,#46467,.T.); +#46465 = VERTEX_POINT('',#46466); +#46466 = CARTESIAN_POINT('',(-2.2,3.38,0.825)); +#46467 = LINE('',#46468,#46469); +#46468 = CARTESIAN_POINT('',(-1.8,3.38,0.825)); +#46469 = VECTOR('',#46470,1.); +#46470 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46471 = ORIENTED_EDGE('',*,*,#46472,.F.); +#46472 = EDGE_CURVE('',#46456,#46465,#46473,.T.); +#46473 = LINE('',#46474,#46475); +#46474 = CARTESIAN_POINT('',(-2.2,2.97,0.825)); +#46475 = VECTOR('',#46476,1.); +#46476 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46477 = PLANE('',#46478); +#46478 = AXIS2_PLACEMENT_3D('',#46479,#46480,#46481); +#46479 = CARTESIAN_POINT('',(-1.8,2.97,0.825)); +#46480 = DIRECTION('',(0.,0.,1.)); +#46481 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46482 = ADVANCED_FACE('',(#46483),#46508,.F.); +#46483 = FACE_BOUND('',#46484,.F.); +#46484 = EDGE_LOOP('',(#46485,#46493,#46494,#46502)); +#46485 = ORIENTED_EDGE('',*,*,#46486,.F.); +#46486 = EDGE_CURVE('',#45580,#46487,#46489,.T.); +#46487 = VERTEX_POINT('',#46488); +#46488 = CARTESIAN_POINT('',(-1.95,3.38,1.025)); +#46489 = LINE('',#46490,#46491); +#46490 = CARTESIAN_POINT('',(-1.95,3.38,0.776557752994)); +#46491 = VECTOR('',#46492,1.); +#46492 = DIRECTION('',(0.,0.,1.)); +#46493 = ORIENTED_EDGE('',*,*,#45579,.T.); +#46494 = ORIENTED_EDGE('',*,*,#46495,.T.); +#46495 = EDGE_CURVE('',#45572,#46496,#46498,.T.); +#46496 = VERTEX_POINT('',#46497); +#46497 = CARTESIAN_POINT('',(-1.95,4.24,1.025)); +#46498 = LINE('',#46499,#46500); +#46499 = CARTESIAN_POINT('',(-1.95,4.24,0.776557752994)); +#46500 = VECTOR('',#46501,1.); +#46501 = DIRECTION('',(0.,0.,1.)); +#46502 = ORIENTED_EDGE('',*,*,#46503,.F.); +#46503 = EDGE_CURVE('',#46487,#46496,#46504,.T.); +#46504 = LINE('',#46505,#46506); +#46505 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46506 = VECTOR('',#46507,1.); +#46507 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46508 = PLANE('',#46509); +#46509 = AXIS2_PLACEMENT_3D('',#46510,#46511,#46512); +#46510 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46511 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46512 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46513 = ADVANCED_FACE('',(#46514),#46539,.F.); +#46514 = FACE_BOUND('',#46515,.F.); +#46515 = EDGE_LOOP('',(#46516,#46524,#46525,#46533)); +#46516 = ORIENTED_EDGE('',*,*,#46517,.F.); +#46517 = EDGE_CURVE('',#45572,#46518,#46520,.T.); +#46518 = VERTEX_POINT('',#46519); +#46519 = CARTESIAN_POINT('',(-2.2,4.24,0.825)); +#46520 = LINE('',#46521,#46522); +#46521 = CARTESIAN_POINT('',(-1.8,4.24,0.825)); +#46522 = VECTOR('',#46523,1.); +#46523 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46524 = ORIENTED_EDGE('',*,*,#45571,.T.); +#46525 = ORIENTED_EDGE('',*,*,#46526,.T.); +#46526 = EDGE_CURVE('',#45564,#46527,#46529,.T.); +#46527 = VERTEX_POINT('',#46528); +#46528 = CARTESIAN_POINT('',(-2.2,4.65,0.825)); +#46529 = LINE('',#46530,#46531); +#46530 = CARTESIAN_POINT('',(-1.8,4.65,0.825)); +#46531 = VECTOR('',#46532,1.); +#46532 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46533 = ORIENTED_EDGE('',*,*,#46534,.F.); +#46534 = EDGE_CURVE('',#46518,#46527,#46535,.T.); +#46535 = LINE('',#46536,#46537); +#46536 = CARTESIAN_POINT('',(-2.2,4.24,0.825)); +#46537 = VECTOR('',#46538,1.); +#46538 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#46539 = PLANE('',#46540); +#46540 = AXIS2_PLACEMENT_3D('',#46541,#46542,#46543); +#46541 = CARTESIAN_POINT('',(-1.8,4.24,0.825)); +#46542 = DIRECTION('',(0.,0.,1.)); +#46543 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#46544 = ADVANCED_FACE('',(#46545),#46556,.F.); +#46545 = FACE_BOUND('',#46546,.F.); +#46546 = EDGE_LOOP('',(#46547,#46553,#46554,#46555)); +#46547 = ORIENTED_EDGE('',*,*,#46548,.F.); +#46548 = EDGE_CURVE('',#45564,#46016,#46549,.T.); +#46549 = LINE('',#46550,#46551); +#46550 = CARTESIAN_POINT('',(-1.95,4.65,0.776557752994)); +#46551 = VECTOR('',#46552,1.); +#46552 = DIRECTION('',(0.,0.,1.)); +#46553 = ORIENTED_EDGE('',*,*,#45563,.T.); +#46554 = ORIENTED_EDGE('',*,*,#46040,.T.); +#46555 = ORIENTED_EDGE('',*,*,#46023,.F.); +#46556 = PLANE('',#46557); +#46557 = AXIS2_PLACEMENT_3D('',#46558,#46559,#46560); +#46558 = CARTESIAN_POINT('',(-1.95,-4.775,1.025)); +#46559 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46560 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#46561 = ADVANCED_FACE('',(#46562),#46573,.F.); +#46562 = FACE_BOUND('',#46563,.F.); +#46563 = EDGE_LOOP('',(#46564,#46565,#46566,#46572)); +#46564 = ORIENTED_EDGE('',*,*,#45927,.F.); +#46565 = ORIENTED_EDGE('',*,*,#45848,.T.); +#46566 = ORIENTED_EDGE('',*,*,#46567,.T.); +#46567 = EDGE_CURVE('',#45841,#45960,#46568,.T.); +#46568 = LINE('',#46569,#46570); +#46569 = CARTESIAN_POINT('',(1.95,4.65,0.776557752994)); +#46570 = VECTOR('',#46571,1.); +#46571 = DIRECTION('',(0.,0.,1.)); +#46572 = ORIENTED_EDGE('',*,*,#45959,.F.); +#46573 = PLANE('',#46574); +#46574 = AXIS2_PLACEMENT_3D('',#46575,#46576,#46577); +#46575 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46576 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#46577 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46578 = ADVANCED_FACE('',(#46579),#46604,.F.); +#46579 = FACE_BOUND('',#46580,.F.); +#46580 = EDGE_LOOP('',(#46581,#46589,#46590,#46598)); +#46581 = ORIENTED_EDGE('',*,*,#46582,.F.); +#46582 = EDGE_CURVE('',#45841,#46583,#46585,.T.); +#46583 = VERTEX_POINT('',#46584); +#46584 = CARTESIAN_POINT('',(2.2,4.65,0.825)); +#46585 = LINE('',#46586,#46587); +#46586 = CARTESIAN_POINT('',(1.8,4.65,0.825)); +#46587 = VECTOR('',#46588,1.); +#46588 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46589 = ORIENTED_EDGE('',*,*,#45840,.T.); +#46590 = ORIENTED_EDGE('',*,*,#46591,.T.); +#46591 = EDGE_CURVE('',#45833,#46592,#46594,.T.); +#46592 = VERTEX_POINT('',#46593); +#46593 = CARTESIAN_POINT('',(2.2,4.24,0.825)); +#46594 = LINE('',#46595,#46596); +#46595 = CARTESIAN_POINT('',(1.8,4.24,0.825)); +#46596 = VECTOR('',#46597,1.); +#46597 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46598 = ORIENTED_EDGE('',*,*,#46599,.F.); +#46599 = EDGE_CURVE('',#46583,#46592,#46600,.T.); +#46600 = LINE('',#46601,#46602); +#46601 = CARTESIAN_POINT('',(2.2,4.65,0.825)); +#46602 = VECTOR('',#46603,1.); +#46603 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46604 = PLANE('',#46605); +#46605 = AXIS2_PLACEMENT_3D('',#46606,#46607,#46608); +#46606 = CARTESIAN_POINT('',(1.8,4.65,0.825)); +#46607 = DIRECTION('',(0.,0.,1.)); +#46608 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#46609 = ADVANCED_FACE('',(#46610),#46635,.F.); +#46610 = FACE_BOUND('',#46611,.F.); +#46611 = EDGE_LOOP('',(#46612,#46620,#46621,#46629)); +#46612 = ORIENTED_EDGE('',*,*,#46613,.F.); +#46613 = EDGE_CURVE('',#45833,#46614,#46616,.T.); +#46614 = VERTEX_POINT('',#46615); +#46615 = CARTESIAN_POINT('',(1.95,4.24,1.025)); +#46616 = LINE('',#46617,#46618); +#46617 = CARTESIAN_POINT('',(1.95,4.24,0.776557752994)); +#46618 = VECTOR('',#46619,1.); +#46619 = DIRECTION('',(0.,0.,1.)); +#46620 = ORIENTED_EDGE('',*,*,#45832,.T.); +#46621 = ORIENTED_EDGE('',*,*,#46622,.T.); +#46622 = EDGE_CURVE('',#45825,#46623,#46625,.T.); +#46623 = VERTEX_POINT('',#46624); +#46624 = CARTESIAN_POINT('',(1.95,3.38,1.025)); +#46625 = LINE('',#46626,#46627); +#46626 = CARTESIAN_POINT('',(1.95,3.38,0.776557752994)); +#46627 = VECTOR('',#46628,1.); +#46628 = DIRECTION('',(0.,0.,1.)); +#46629 = ORIENTED_EDGE('',*,*,#46630,.F.); +#46630 = EDGE_CURVE('',#46614,#46623,#46631,.T.); +#46631 = LINE('',#46632,#46633); +#46632 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46633 = VECTOR('',#46634,1.); +#46634 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46635 = PLANE('',#46636); +#46636 = AXIS2_PLACEMENT_3D('',#46637,#46638,#46639); +#46637 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46638 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#46639 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46640 = ADVANCED_FACE('',(#46641),#46666,.F.); +#46641 = FACE_BOUND('',#46642,.F.); +#46642 = EDGE_LOOP('',(#46643,#46651,#46652,#46660)); +#46643 = ORIENTED_EDGE('',*,*,#46644,.F.); +#46644 = EDGE_CURVE('',#45825,#46645,#46647,.T.); +#46645 = VERTEX_POINT('',#46646); +#46646 = CARTESIAN_POINT('',(2.2,3.38,0.825)); +#46647 = LINE('',#46648,#46649); +#46648 = CARTESIAN_POINT('',(1.8,3.38,0.825)); +#46649 = VECTOR('',#46650,1.); +#46650 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46651 = ORIENTED_EDGE('',*,*,#45824,.T.); +#46652 = ORIENTED_EDGE('',*,*,#46653,.T.); +#46653 = EDGE_CURVE('',#45817,#46654,#46656,.T.); +#46654 = VERTEX_POINT('',#46655); +#46655 = CARTESIAN_POINT('',(2.2,2.97,0.825)); +#46656 = LINE('',#46657,#46658); +#46657 = CARTESIAN_POINT('',(1.8,2.97,0.825)); +#46658 = VECTOR('',#46659,1.); +#46659 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46660 = ORIENTED_EDGE('',*,*,#46661,.F.); +#46661 = EDGE_CURVE('',#46645,#46654,#46662,.T.); +#46662 = LINE('',#46663,#46664); +#46663 = CARTESIAN_POINT('',(2.2,3.38,0.825)); +#46664 = VECTOR('',#46665,1.); +#46665 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46666 = PLANE('',#46667); +#46667 = AXIS2_PLACEMENT_3D('',#46668,#46669,#46670); +#46668 = CARTESIAN_POINT('',(1.8,3.38,0.825)); +#46669 = DIRECTION('',(0.,0.,1.)); +#46670 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#46671 = ADVANCED_FACE('',(#46672),#46697,.F.); +#46672 = FACE_BOUND('',#46673,.F.); +#46673 = EDGE_LOOP('',(#46674,#46682,#46683,#46691)); +#46674 = ORIENTED_EDGE('',*,*,#46675,.F.); +#46675 = EDGE_CURVE('',#45817,#46676,#46678,.T.); +#46676 = VERTEX_POINT('',#46677); +#46677 = CARTESIAN_POINT('',(1.95,2.97,1.025)); +#46678 = LINE('',#46679,#46680); +#46679 = CARTESIAN_POINT('',(1.95,2.97,0.776557752994)); +#46680 = VECTOR('',#46681,1.); +#46681 = DIRECTION('',(0.,0.,1.)); +#46682 = ORIENTED_EDGE('',*,*,#45816,.T.); +#46683 = ORIENTED_EDGE('',*,*,#46684,.T.); +#46684 = EDGE_CURVE('',#45809,#46685,#46687,.T.); +#46685 = VERTEX_POINT('',#46686); +#46686 = CARTESIAN_POINT('',(1.95,2.11,1.025)); +#46687 = LINE('',#46688,#46689); +#46688 = CARTESIAN_POINT('',(1.95,2.11,0.776557752994)); +#46689 = VECTOR('',#46690,1.); +#46690 = DIRECTION('',(0.,0.,1.)); +#46691 = ORIENTED_EDGE('',*,*,#46692,.F.); +#46692 = EDGE_CURVE('',#46676,#46685,#46693,.T.); +#46693 = LINE('',#46694,#46695); +#46694 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46695 = VECTOR('',#46696,1.); +#46696 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46697 = PLANE('',#46698); +#46698 = AXIS2_PLACEMENT_3D('',#46699,#46700,#46701); +#46699 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46700 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#46701 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46702 = ADVANCED_FACE('',(#46703),#46728,.F.); +#46703 = FACE_BOUND('',#46704,.F.); +#46704 = EDGE_LOOP('',(#46705,#46713,#46714,#46722)); +#46705 = ORIENTED_EDGE('',*,*,#46706,.F.); +#46706 = EDGE_CURVE('',#45809,#46707,#46709,.T.); +#46707 = VERTEX_POINT('',#46708); +#46708 = CARTESIAN_POINT('',(2.2,2.11,0.825)); +#46709 = LINE('',#46710,#46711); +#46710 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#46711 = VECTOR('',#46712,1.); +#46712 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46713 = ORIENTED_EDGE('',*,*,#45808,.T.); +#46714 = ORIENTED_EDGE('',*,*,#46715,.T.); +#46715 = EDGE_CURVE('',#45801,#46716,#46718,.T.); +#46716 = VERTEX_POINT('',#46717); +#46717 = CARTESIAN_POINT('',(2.2,1.7,0.825)); +#46718 = LINE('',#46719,#46720); +#46719 = CARTESIAN_POINT('',(1.8,1.7,0.825)); +#46720 = VECTOR('',#46721,1.); +#46721 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46722 = ORIENTED_EDGE('',*,*,#46723,.F.); +#46723 = EDGE_CURVE('',#46707,#46716,#46724,.T.); +#46724 = LINE('',#46725,#46726); +#46725 = CARTESIAN_POINT('',(2.2,2.11,0.825)); +#46726 = VECTOR('',#46727,1.); +#46727 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46728 = PLANE('',#46729); +#46729 = AXIS2_PLACEMENT_3D('',#46730,#46731,#46732); +#46730 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#46731 = DIRECTION('',(0.,0.,1.)); +#46732 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#46733 = ADVANCED_FACE('',(#46734),#46759,.F.); +#46734 = FACE_BOUND('',#46735,.F.); +#46735 = EDGE_LOOP('',(#46736,#46744,#46745,#46753)); +#46736 = ORIENTED_EDGE('',*,*,#46737,.F.); +#46737 = EDGE_CURVE('',#45801,#46738,#46740,.T.); +#46738 = VERTEX_POINT('',#46739); +#46739 = CARTESIAN_POINT('',(1.95,1.7,1.025)); +#46740 = LINE('',#46741,#46742); +#46741 = CARTESIAN_POINT('',(1.95,1.7,0.776557752994)); +#46742 = VECTOR('',#46743,1.); +#46743 = DIRECTION('',(0.,0.,1.)); +#46744 = ORIENTED_EDGE('',*,*,#45800,.T.); +#46745 = ORIENTED_EDGE('',*,*,#46746,.T.); +#46746 = EDGE_CURVE('',#45793,#46747,#46749,.T.); +#46747 = VERTEX_POINT('',#46748); +#46748 = CARTESIAN_POINT('',(1.95,0.84,1.025)); +#46749 = LINE('',#46750,#46751); +#46750 = CARTESIAN_POINT('',(1.95,0.84,0.776557752994)); +#46751 = VECTOR('',#46752,1.); +#46752 = DIRECTION('',(0.,0.,1.)); +#46753 = ORIENTED_EDGE('',*,*,#46754,.F.); +#46754 = EDGE_CURVE('',#46738,#46747,#46755,.T.); +#46755 = LINE('',#46756,#46757); +#46756 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46757 = VECTOR('',#46758,1.); +#46758 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46759 = PLANE('',#46760); +#46760 = AXIS2_PLACEMENT_3D('',#46761,#46762,#46763); +#46761 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46762 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#46763 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46764 = ADVANCED_FACE('',(#46765),#46790,.F.); +#46765 = FACE_BOUND('',#46766,.F.); +#46766 = EDGE_LOOP('',(#46767,#46775,#46776,#46784)); +#46767 = ORIENTED_EDGE('',*,*,#46768,.F.); +#46768 = EDGE_CURVE('',#45793,#46769,#46771,.T.); +#46769 = VERTEX_POINT('',#46770); +#46770 = CARTESIAN_POINT('',(2.2,0.84,0.825)); +#46771 = LINE('',#46772,#46773); +#46772 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#46773 = VECTOR('',#46774,1.); +#46774 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46775 = ORIENTED_EDGE('',*,*,#45792,.T.); +#46776 = ORIENTED_EDGE('',*,*,#46777,.T.); +#46777 = EDGE_CURVE('',#45785,#46778,#46780,.T.); +#46778 = VERTEX_POINT('',#46779); +#46779 = CARTESIAN_POINT('',(2.2,0.43,0.825)); +#46780 = LINE('',#46781,#46782); +#46781 = CARTESIAN_POINT('',(1.8,0.43,0.825)); +#46782 = VECTOR('',#46783,1.); +#46783 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46784 = ORIENTED_EDGE('',*,*,#46785,.F.); +#46785 = EDGE_CURVE('',#46769,#46778,#46786,.T.); +#46786 = LINE('',#46787,#46788); +#46787 = CARTESIAN_POINT('',(2.2,0.84,0.825)); +#46788 = VECTOR('',#46789,1.); +#46789 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46790 = PLANE('',#46791); +#46791 = AXIS2_PLACEMENT_3D('',#46792,#46793,#46794); +#46792 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#46793 = DIRECTION('',(0.,0.,1.)); +#46794 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#46795 = ADVANCED_FACE('',(#46796),#46821,.F.); +#46796 = FACE_BOUND('',#46797,.F.); +#46797 = EDGE_LOOP('',(#46798,#46806,#46807,#46815)); +#46798 = ORIENTED_EDGE('',*,*,#46799,.F.); +#46799 = EDGE_CURVE('',#45785,#46800,#46802,.T.); +#46800 = VERTEX_POINT('',#46801); +#46801 = CARTESIAN_POINT('',(1.95,0.43,1.025)); +#46802 = LINE('',#46803,#46804); +#46803 = CARTESIAN_POINT('',(1.95,0.43,0.776557752994)); +#46804 = VECTOR('',#46805,1.); +#46805 = DIRECTION('',(0.,0.,1.)); +#46806 = ORIENTED_EDGE('',*,*,#45784,.T.); +#46807 = ORIENTED_EDGE('',*,*,#46808,.T.); +#46808 = EDGE_CURVE('',#45777,#46809,#46811,.T.); +#46809 = VERTEX_POINT('',#46810); +#46810 = CARTESIAN_POINT('',(1.95,-0.43,1.025)); +#46811 = LINE('',#46812,#46813); +#46812 = CARTESIAN_POINT('',(1.95,-0.43,0.776557752994)); +#46813 = VECTOR('',#46814,1.); +#46814 = DIRECTION('',(0.,0.,1.)); +#46815 = ORIENTED_EDGE('',*,*,#46816,.F.); +#46816 = EDGE_CURVE('',#46800,#46809,#46817,.T.); +#46817 = LINE('',#46818,#46819); +#46818 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46819 = VECTOR('',#46820,1.); +#46820 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46821 = PLANE('',#46822); +#46822 = AXIS2_PLACEMENT_3D('',#46823,#46824,#46825); +#46823 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46824 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#46825 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46826 = ADVANCED_FACE('',(#46827),#46852,.F.); +#46827 = FACE_BOUND('',#46828,.F.); +#46828 = EDGE_LOOP('',(#46829,#46837,#46838,#46846)); +#46829 = ORIENTED_EDGE('',*,*,#46830,.F.); +#46830 = EDGE_CURVE('',#45777,#46831,#46833,.T.); +#46831 = VERTEX_POINT('',#46832); +#46832 = CARTESIAN_POINT('',(2.2,-0.43,0.825)); +#46833 = LINE('',#46834,#46835); +#46834 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#46835 = VECTOR('',#46836,1.); +#46836 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46837 = ORIENTED_EDGE('',*,*,#45776,.T.); +#46838 = ORIENTED_EDGE('',*,*,#46839,.T.); +#46839 = EDGE_CURVE('',#45769,#46840,#46842,.T.); +#46840 = VERTEX_POINT('',#46841); +#46841 = CARTESIAN_POINT('',(2.2,-0.84,0.825)); +#46842 = LINE('',#46843,#46844); +#46843 = CARTESIAN_POINT('',(1.8,-0.84,0.825)); +#46844 = VECTOR('',#46845,1.); +#46845 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46846 = ORIENTED_EDGE('',*,*,#46847,.F.); +#46847 = EDGE_CURVE('',#46831,#46840,#46848,.T.); +#46848 = LINE('',#46849,#46850); +#46849 = CARTESIAN_POINT('',(2.2,-0.43,0.825)); +#46850 = VECTOR('',#46851,1.); +#46851 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46852 = PLANE('',#46853); +#46853 = AXIS2_PLACEMENT_3D('',#46854,#46855,#46856); +#46854 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#46855 = DIRECTION('',(0.,0.,1.)); +#46856 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#46857 = ADVANCED_FACE('',(#46858),#46883,.F.); +#46858 = FACE_BOUND('',#46859,.F.); +#46859 = EDGE_LOOP('',(#46860,#46868,#46869,#46877)); +#46860 = ORIENTED_EDGE('',*,*,#46861,.F.); +#46861 = EDGE_CURVE('',#45769,#46862,#46864,.T.); +#46862 = VERTEX_POINT('',#46863); +#46863 = CARTESIAN_POINT('',(1.95,-0.84,1.025)); +#46864 = LINE('',#46865,#46866); +#46865 = CARTESIAN_POINT('',(1.95,-0.84,0.776557752994)); +#46866 = VECTOR('',#46867,1.); +#46867 = DIRECTION('',(0.,0.,1.)); +#46868 = ORIENTED_EDGE('',*,*,#45768,.T.); +#46869 = ORIENTED_EDGE('',*,*,#46870,.T.); +#46870 = EDGE_CURVE('',#45761,#46871,#46873,.T.); +#46871 = VERTEX_POINT('',#46872); +#46872 = CARTESIAN_POINT('',(1.95,-1.7,1.025)); +#46873 = LINE('',#46874,#46875); +#46874 = CARTESIAN_POINT('',(1.95,-1.7,0.776557752994)); +#46875 = VECTOR('',#46876,1.); +#46876 = DIRECTION('',(0.,0.,1.)); +#46877 = ORIENTED_EDGE('',*,*,#46878,.F.); +#46878 = EDGE_CURVE('',#46862,#46871,#46879,.T.); +#46879 = LINE('',#46880,#46881); +#46880 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46881 = VECTOR('',#46882,1.); +#46882 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46883 = PLANE('',#46884); +#46884 = AXIS2_PLACEMENT_3D('',#46885,#46886,#46887); +#46885 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46886 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#46887 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46888 = ADVANCED_FACE('',(#46889),#46914,.F.); +#46889 = FACE_BOUND('',#46890,.F.); +#46890 = EDGE_LOOP('',(#46891,#46899,#46900,#46908)); +#46891 = ORIENTED_EDGE('',*,*,#46892,.F.); +#46892 = EDGE_CURVE('',#45761,#46893,#46895,.T.); +#46893 = VERTEX_POINT('',#46894); +#46894 = CARTESIAN_POINT('',(2.2,-1.7,0.825)); +#46895 = LINE('',#46896,#46897); +#46896 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#46897 = VECTOR('',#46898,1.); +#46898 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46899 = ORIENTED_EDGE('',*,*,#45760,.T.); +#46900 = ORIENTED_EDGE('',*,*,#46901,.T.); +#46901 = EDGE_CURVE('',#45753,#46902,#46904,.T.); +#46902 = VERTEX_POINT('',#46903); +#46903 = CARTESIAN_POINT('',(2.2,-2.11,0.825)); +#46904 = LINE('',#46905,#46906); +#46905 = CARTESIAN_POINT('',(1.8,-2.11,0.825)); +#46906 = VECTOR('',#46907,1.); +#46907 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46908 = ORIENTED_EDGE('',*,*,#46909,.F.); +#46909 = EDGE_CURVE('',#46893,#46902,#46910,.T.); +#46910 = LINE('',#46911,#46912); +#46911 = CARTESIAN_POINT('',(2.2,-1.7,0.825)); +#46912 = VECTOR('',#46913,1.); +#46913 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46914 = PLANE('',#46915); +#46915 = AXIS2_PLACEMENT_3D('',#46916,#46917,#46918); +#46916 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#46917 = DIRECTION('',(0.,0.,1.)); +#46918 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#46919 = ADVANCED_FACE('',(#46920),#46945,.F.); +#46920 = FACE_BOUND('',#46921,.F.); +#46921 = EDGE_LOOP('',(#46922,#46930,#46931,#46939)); +#46922 = ORIENTED_EDGE('',*,*,#46923,.F.); +#46923 = EDGE_CURVE('',#45753,#46924,#46926,.T.); +#46924 = VERTEX_POINT('',#46925); +#46925 = CARTESIAN_POINT('',(1.95,-2.11,1.025)); +#46926 = LINE('',#46927,#46928); +#46927 = CARTESIAN_POINT('',(1.95,-2.11,0.776557752994)); +#46928 = VECTOR('',#46929,1.); +#46929 = DIRECTION('',(0.,0.,1.)); +#46930 = ORIENTED_EDGE('',*,*,#45752,.T.); +#46931 = ORIENTED_EDGE('',*,*,#46932,.T.); +#46932 = EDGE_CURVE('',#45745,#46933,#46935,.T.); +#46933 = VERTEX_POINT('',#46934); +#46934 = CARTESIAN_POINT('',(1.95,-2.97,1.025)); +#46935 = LINE('',#46936,#46937); +#46936 = CARTESIAN_POINT('',(1.95,-2.97,0.776557752994)); +#46937 = VECTOR('',#46938,1.); +#46938 = DIRECTION('',(0.,0.,1.)); +#46939 = ORIENTED_EDGE('',*,*,#46940,.F.); +#46940 = EDGE_CURVE('',#46924,#46933,#46941,.T.); +#46941 = LINE('',#46942,#46943); +#46942 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46943 = VECTOR('',#46944,1.); +#46944 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46945 = PLANE('',#46946); +#46946 = AXIS2_PLACEMENT_3D('',#46947,#46948,#46949); +#46947 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#46948 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#46949 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46950 = ADVANCED_FACE('',(#46951),#46976,.F.); +#46951 = FACE_BOUND('',#46952,.F.); +#46952 = EDGE_LOOP('',(#46953,#46961,#46962,#46970)); +#46953 = ORIENTED_EDGE('',*,*,#46954,.F.); +#46954 = EDGE_CURVE('',#45745,#46955,#46957,.T.); +#46955 = VERTEX_POINT('',#46956); +#46956 = CARTESIAN_POINT('',(2.2,-2.97,0.825)); +#46957 = LINE('',#46958,#46959); +#46958 = CARTESIAN_POINT('',(1.8,-2.97,0.825)); +#46959 = VECTOR('',#46960,1.); +#46960 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46961 = ORIENTED_EDGE('',*,*,#45744,.T.); +#46962 = ORIENTED_EDGE('',*,*,#46963,.T.); +#46963 = EDGE_CURVE('',#45737,#46964,#46966,.T.); +#46964 = VERTEX_POINT('',#46965); +#46965 = CARTESIAN_POINT('',(2.2,-3.38,0.825)); +#46966 = LINE('',#46967,#46968); +#46967 = CARTESIAN_POINT('',(1.8,-3.38,0.825)); +#46968 = VECTOR('',#46969,1.); +#46969 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#46970 = ORIENTED_EDGE('',*,*,#46971,.F.); +#46971 = EDGE_CURVE('',#46955,#46964,#46972,.T.); +#46972 = LINE('',#46973,#46974); +#46973 = CARTESIAN_POINT('',(2.2,-2.97,0.825)); +#46974 = VECTOR('',#46975,1.); +#46975 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#46976 = PLANE('',#46977); +#46977 = AXIS2_PLACEMENT_3D('',#46978,#46979,#46980); +#46978 = CARTESIAN_POINT('',(1.8,-2.97,0.825)); +#46979 = DIRECTION('',(0.,0.,1.)); +#46980 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#46981 = ADVANCED_FACE('',(#46982),#47007,.F.); +#46982 = FACE_BOUND('',#46983,.F.); +#46983 = EDGE_LOOP('',(#46984,#46992,#46993,#47001)); +#46984 = ORIENTED_EDGE('',*,*,#46985,.F.); +#46985 = EDGE_CURVE('',#45737,#46986,#46988,.T.); +#46986 = VERTEX_POINT('',#46987); +#46987 = CARTESIAN_POINT('',(1.95,-3.38,1.025)); +#46988 = LINE('',#46989,#46990); +#46989 = CARTESIAN_POINT('',(1.95,-3.38,0.776557752994)); +#46990 = VECTOR('',#46991,1.); +#46991 = DIRECTION('',(0.,0.,1.)); +#46992 = ORIENTED_EDGE('',*,*,#45736,.T.); +#46993 = ORIENTED_EDGE('',*,*,#46994,.T.); +#46994 = EDGE_CURVE('',#45729,#46995,#46997,.T.); +#46995 = VERTEX_POINT('',#46996); +#46996 = CARTESIAN_POINT('',(1.95,-4.24,1.025)); +#46997 = LINE('',#46998,#46999); +#46998 = CARTESIAN_POINT('',(1.95,-4.24,0.776557752994)); +#46999 = VECTOR('',#47000,1.); +#47000 = DIRECTION('',(0.,0.,1.)); +#47001 = ORIENTED_EDGE('',*,*,#47002,.F.); +#47002 = EDGE_CURVE('',#46986,#46995,#47003,.T.); +#47003 = LINE('',#47004,#47005); +#47004 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#47005 = VECTOR('',#47006,1.); +#47006 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47007 = PLANE('',#47008); +#47008 = AXIS2_PLACEMENT_3D('',#47009,#47010,#47011); +#47009 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#47010 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47011 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47012 = ADVANCED_FACE('',(#47013),#47038,.F.); +#47013 = FACE_BOUND('',#47014,.F.); +#47014 = EDGE_LOOP('',(#47015,#47023,#47024,#47032)); +#47015 = ORIENTED_EDGE('',*,*,#47016,.F.); +#47016 = EDGE_CURVE('',#45729,#47017,#47019,.T.); +#47017 = VERTEX_POINT('',#47018); +#47018 = CARTESIAN_POINT('',(2.2,-4.24,0.825)); +#47019 = LINE('',#47020,#47021); +#47020 = CARTESIAN_POINT('',(1.8,-4.24,0.825)); +#47021 = VECTOR('',#47022,1.); +#47022 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#47023 = ORIENTED_EDGE('',*,*,#45728,.T.); +#47024 = ORIENTED_EDGE('',*,*,#47025,.T.); +#47025 = EDGE_CURVE('',#45721,#47026,#47028,.T.); +#47026 = VERTEX_POINT('',#47027); +#47027 = CARTESIAN_POINT('',(2.2,-4.65,0.825)); +#47028 = LINE('',#47029,#47030); +#47029 = CARTESIAN_POINT('',(1.8,-4.65,0.825)); +#47030 = VECTOR('',#47031,1.); +#47031 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#47032 = ORIENTED_EDGE('',*,*,#47033,.F.); +#47033 = EDGE_CURVE('',#47017,#47026,#47034,.T.); +#47034 = LINE('',#47035,#47036); +#47035 = CARTESIAN_POINT('',(2.2,-4.24,0.825)); +#47036 = VECTOR('',#47037,1.); +#47037 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47038 = PLANE('',#47039); +#47039 = AXIS2_PLACEMENT_3D('',#47040,#47041,#47042); +#47040 = CARTESIAN_POINT('',(1.8,-4.24,0.825)); +#47041 = DIRECTION('',(0.,0.,1.)); +#47042 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#47043 = ADVANCED_FACE('',(#47044),#47068,.F.); +#47044 = FACE_BOUND('',#47045,.F.); +#47045 = EDGE_LOOP('',(#47046,#47054,#47055,#47062)); +#47046 = ORIENTED_EDGE('',*,*,#47047,.F.); +#47047 = EDGE_CURVE('',#45721,#47048,#47050,.T.); +#47048 = VERTEX_POINT('',#47049); +#47049 = CARTESIAN_POINT('',(1.95,-4.65,1.025)); +#47050 = LINE('',#47051,#47052); +#47051 = CARTESIAN_POINT('',(1.95,-4.65,0.776557752994)); +#47052 = VECTOR('',#47053,1.); +#47053 = DIRECTION('',(0.,0.,1.)); +#47054 = ORIENTED_EDGE('',*,*,#45720,.T.); +#47055 = ORIENTED_EDGE('',*,*,#47056,.T.); +#47056 = EDGE_CURVE('',#45714,#47057,#47059,.T.); +#47057 = VERTEX_POINT('',#47058); +#47058 = CARTESIAN_POINT('',(1.95,-4.775,1.025)); +#47059 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47060,#47061),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47060 = CARTESIAN_POINT('',(1.95,-4.775,0.825)); +#47061 = CARTESIAN_POINT('',(1.95,-4.775,1.025)); +#47062 = ORIENTED_EDGE('',*,*,#47063,.F.); +#47063 = EDGE_CURVE('',#47048,#47057,#47064,.T.); +#47064 = LINE('',#47065,#47066); +#47065 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#47066 = VECTOR('',#47067,1.); +#47067 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47068 = PLANE('',#47069); +#47069 = AXIS2_PLACEMENT_3D('',#47070,#47071,#47072); +#47070 = CARTESIAN_POINT('',(1.95,4.775,1.025)); +#47071 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47072 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47073 = ADVANCED_FACE('',(#47074),#47091,.F.); +#47074 = FACE_BOUND('',#47075,.F.); +#47075 = EDGE_LOOP('',(#47076,#47077,#47078,#47086)); +#47076 = ORIENTED_EDGE('',*,*,#45865,.T.); +#47077 = ORIENTED_EDGE('',*,*,#46053,.T.); +#47078 = ORIENTED_EDGE('',*,*,#47079,.F.); +#47079 = EDGE_CURVE('',#47080,#46054,#47082,.T.); +#47080 = VERTEX_POINT('',#47081); +#47081 = CARTESIAN_POINT('',(-1.775,-4.95,1.025)); +#47082 = LINE('',#47083,#47084); +#47083 = CARTESIAN_POINT('',(-1.775,-4.95,1.025)); +#47084 = VECTOR('',#47085,1.); +#47085 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#47086 = ORIENTED_EDGE('',*,*,#47087,.F.); +#47087 = EDGE_CURVE('',#45866,#47080,#47088,.T.); +#47088 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47089,#47090),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47089 = CARTESIAN_POINT('',(-1.775,-4.95,0.825)); +#47090 = CARTESIAN_POINT('',(-1.775,-4.95,1.025)); +#47091 = PLANE('',#47092); +#47092 = AXIS2_PLACEMENT_3D('',#47093,#47094,#47095); +#47093 = CARTESIAN_POINT('',(-1.775,-4.95,1.025)); +#47094 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#47095 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#47096 = ADVANCED_FACE('',(#47097),#47114,.F.); +#47097 = FACE_BOUND('',#47098,.F.); +#47098 = EDGE_LOOP('',(#47099,#47100,#47107,#47113)); +#47099 = ORIENTED_EDGE('',*,*,#45894,.T.); +#47100 = ORIENTED_EDGE('',*,*,#47101,.T.); +#47101 = EDGE_CURVE('',#45888,#47102,#47104,.T.); +#47102 = VERTEX_POINT('',#47103); +#47103 = CARTESIAN_POINT('',(1.775,-4.95,1.025)); +#47104 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47105,#47106),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47105 = CARTESIAN_POINT('',(1.775,-4.95,0.825)); +#47106 = CARTESIAN_POINT('',(1.775,-4.95,1.025)); +#47107 = ORIENTED_EDGE('',*,*,#47108,.F.); +#47108 = EDGE_CURVE('',#47057,#47102,#47109,.T.); +#47109 = LINE('',#47110,#47111); +#47110 = CARTESIAN_POINT('',(1.95,-4.775,1.025)); +#47111 = VECTOR('',#47112,1.); +#47112 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#47113 = ORIENTED_EDGE('',*,*,#47056,.F.); +#47114 = PLANE('',#47115); +#47115 = AXIS2_PLACEMENT_3D('',#47116,#47117,#47118); +#47116 = CARTESIAN_POINT('',(1.95,-4.775,1.025)); +#47117 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#47118 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#47119 = ADVANCED_FACE('',(#47120),#47131,.F.); +#47120 = FACE_BOUND('',#47121,.F.); +#47121 = EDGE_LOOP('',(#47122,#47123,#47124,#47130)); +#47122 = ORIENTED_EDGE('',*,*,#45911,.T.); +#47123 = ORIENTED_EDGE('',*,*,#47087,.T.); +#47124 = ORIENTED_EDGE('',*,*,#47125,.F.); +#47125 = EDGE_CURVE('',#47102,#47080,#47126,.T.); +#47126 = LINE('',#47127,#47128); +#47127 = CARTESIAN_POINT('',(1.775,-4.95,1.025)); +#47128 = VECTOR('',#47129,1.); +#47129 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47130 = ORIENTED_EDGE('',*,*,#47101,.F.); +#47131 = PLANE('',#47132); +#47132 = AXIS2_PLACEMENT_3D('',#47133,#47134,#47135); +#47133 = CARTESIAN_POINT('',(1.775,-4.95,1.025)); +#47134 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47135 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47136 = ADVANCED_FACE('',(#47137),#47176,.F.); +#47137 = FACE_BOUND('',#47138,.F.); +#47138 = EDGE_LOOP('',(#47139,#47147,#47155,#47161,#47162,#47170)); +#47139 = ORIENTED_EDGE('',*,*,#47140,.F.); +#47140 = EDGE_CURVE('',#47141,#46496,#47143,.T.); +#47141 = VERTEX_POINT('',#47142); +#47142 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#47143 = LINE('',#47144,#47145); +#47144 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#47145 = VECTOR('',#47146,1.); +#47146 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47147 = ORIENTED_EDGE('',*,*,#47148,.T.); +#47148 = EDGE_CURVE('',#47141,#47149,#47151,.T.); +#47149 = VERTEX_POINT('',#47150); +#47150 = CARTESIAN_POINT('',(-2.2,4.65,1.025)); +#47151 = LINE('',#47152,#47153); +#47152 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#47153 = VECTOR('',#47154,1.); +#47154 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47155 = ORIENTED_EDGE('',*,*,#47156,.T.); +#47156 = EDGE_CURVE('',#47149,#46016,#47157,.T.); +#47157 = LINE('',#47158,#47159); +#47158 = CARTESIAN_POINT('',(-2.2,4.65,1.025)); +#47159 = VECTOR('',#47160,1.); +#47160 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47161 = ORIENTED_EDGE('',*,*,#46015,.T.); +#47162 = ORIENTED_EDGE('',*,*,#47163,.F.); +#47163 = EDGE_CURVE('',#47164,#46008,#47166,.T.); +#47164 = VERTEX_POINT('',#47165); +#47165 = CARTESIAN_POINT('',(-1.875,4.24,1.025)); +#47166 = LINE('',#47167,#47168); +#47167 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47168 = VECTOR('',#47169,1.); +#47169 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47170 = ORIENTED_EDGE('',*,*,#47171,.F.); +#47171 = EDGE_CURVE('',#46496,#47164,#47172,.T.); +#47172 = LINE('',#47173,#47174); +#47173 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#47174 = VECTOR('',#47175,1.); +#47175 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47176 = PLANE('',#47177); +#47177 = AXIS2_PLACEMENT_3D('',#47178,#47179,#47180); +#47178 = CARTESIAN_POINT('',(-2.2,4.24,1.025)); +#47179 = DIRECTION('',(0.,0.,-1.)); +#47180 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47181 = ADVANCED_FACE('',(#47182),#47326,.F.); +#47182 = FACE_BOUND('',#47183,.F.); +#47183 = EDGE_LOOP('',(#47184,#47194,#47202,#47210,#47218,#47226,#47234, + #47242,#47250,#47258,#47266,#47274,#47282,#47290,#47298,#47304, + #47305,#47306,#47313,#47321)); +#47184 = ORIENTED_EDGE('',*,*,#47185,.T.); +#47185 = EDGE_CURVE('',#47186,#47188,#47190,.T.); +#47186 = VERTEX_POINT('',#47187); +#47187 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47188 = VERTEX_POINT('',#47189); +#47189 = CARTESIAN_POINT('',(-1.875,-4.65,1.025)); +#47190 = LINE('',#47191,#47192); +#47191 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47192 = VECTOR('',#47193,1.); +#47193 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47194 = ORIENTED_EDGE('',*,*,#47195,.T.); +#47195 = EDGE_CURVE('',#47188,#47196,#47198,.T.); +#47196 = VERTEX_POINT('',#47197); +#47197 = CARTESIAN_POINT('',(-1.875,-4.24,1.025)); +#47198 = LINE('',#47199,#47200); +#47199 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47200 = VECTOR('',#47201,1.); +#47201 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47202 = ORIENTED_EDGE('',*,*,#47203,.T.); +#47203 = EDGE_CURVE('',#47196,#47204,#47206,.T.); +#47204 = VERTEX_POINT('',#47205); +#47205 = CARTESIAN_POINT('',(-1.875,-3.38,1.025)); +#47206 = LINE('',#47207,#47208); +#47207 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47208 = VECTOR('',#47209,1.); +#47209 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47210 = ORIENTED_EDGE('',*,*,#47211,.T.); +#47211 = EDGE_CURVE('',#47204,#47212,#47214,.T.); +#47212 = VERTEX_POINT('',#47213); +#47213 = CARTESIAN_POINT('',(-1.875,-2.97,1.025)); +#47214 = LINE('',#47215,#47216); +#47215 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47216 = VECTOR('',#47217,1.); +#47217 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47218 = ORIENTED_EDGE('',*,*,#47219,.T.); +#47219 = EDGE_CURVE('',#47212,#47220,#47222,.T.); +#47220 = VERTEX_POINT('',#47221); +#47221 = CARTESIAN_POINT('',(-1.875,-2.11,1.025)); +#47222 = LINE('',#47223,#47224); +#47223 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47224 = VECTOR('',#47225,1.); +#47225 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47226 = ORIENTED_EDGE('',*,*,#47227,.T.); +#47227 = EDGE_CURVE('',#47220,#47228,#47230,.T.); +#47228 = VERTEX_POINT('',#47229); +#47229 = CARTESIAN_POINT('',(-1.875,-1.7,1.025)); +#47230 = LINE('',#47231,#47232); +#47231 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47232 = VECTOR('',#47233,1.); +#47233 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47234 = ORIENTED_EDGE('',*,*,#47235,.T.); +#47235 = EDGE_CURVE('',#47228,#47236,#47238,.T.); +#47236 = VERTEX_POINT('',#47237); +#47237 = CARTESIAN_POINT('',(-1.875,-0.84,1.025)); +#47238 = LINE('',#47239,#47240); +#47239 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47240 = VECTOR('',#47241,1.); +#47241 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47242 = ORIENTED_EDGE('',*,*,#47243,.T.); +#47243 = EDGE_CURVE('',#47236,#47244,#47246,.T.); +#47244 = VERTEX_POINT('',#47245); +#47245 = CARTESIAN_POINT('',(-1.875,-0.43,1.025)); +#47246 = LINE('',#47247,#47248); +#47247 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47248 = VECTOR('',#47249,1.); +#47249 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47250 = ORIENTED_EDGE('',*,*,#47251,.T.); +#47251 = EDGE_CURVE('',#47244,#47252,#47254,.T.); +#47252 = VERTEX_POINT('',#47253); +#47253 = CARTESIAN_POINT('',(-1.875,0.43,1.025)); +#47254 = LINE('',#47255,#47256); +#47255 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47256 = VECTOR('',#47257,1.); +#47257 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47258 = ORIENTED_EDGE('',*,*,#47259,.T.); +#47259 = EDGE_CURVE('',#47252,#47260,#47262,.T.); +#47260 = VERTEX_POINT('',#47261); +#47261 = CARTESIAN_POINT('',(-1.875,0.84,1.025)); +#47262 = LINE('',#47263,#47264); +#47263 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47264 = VECTOR('',#47265,1.); +#47265 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47266 = ORIENTED_EDGE('',*,*,#47267,.T.); +#47267 = EDGE_CURVE('',#47260,#47268,#47270,.T.); +#47268 = VERTEX_POINT('',#47269); +#47269 = CARTESIAN_POINT('',(-1.875,1.7,1.025)); +#47270 = LINE('',#47271,#47272); +#47271 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47272 = VECTOR('',#47273,1.); +#47273 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47274 = ORIENTED_EDGE('',*,*,#47275,.T.); +#47275 = EDGE_CURVE('',#47268,#47276,#47278,.T.); +#47276 = VERTEX_POINT('',#47277); +#47277 = CARTESIAN_POINT('',(-1.875,2.11,1.025)); +#47278 = LINE('',#47279,#47280); +#47279 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47280 = VECTOR('',#47281,1.); +#47281 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47282 = ORIENTED_EDGE('',*,*,#47283,.T.); +#47283 = EDGE_CURVE('',#47276,#47284,#47286,.T.); +#47284 = VERTEX_POINT('',#47285); +#47285 = CARTESIAN_POINT('',(-1.875,2.97,1.025)); +#47286 = LINE('',#47287,#47288); +#47287 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47288 = VECTOR('',#47289,1.); +#47289 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47290 = ORIENTED_EDGE('',*,*,#47291,.T.); +#47291 = EDGE_CURVE('',#47284,#47292,#47294,.T.); +#47292 = VERTEX_POINT('',#47293); +#47293 = CARTESIAN_POINT('',(-1.875,3.38,1.025)); +#47294 = LINE('',#47295,#47296); +#47295 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47296 = VECTOR('',#47297,1.); +#47297 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47298 = ORIENTED_EDGE('',*,*,#47299,.T.); +#47299 = EDGE_CURVE('',#47292,#47164,#47300,.T.); +#47300 = LINE('',#47301,#47302); +#47301 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47302 = VECTOR('',#47303,1.); +#47303 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47304 = ORIENTED_EDGE('',*,*,#47163,.T.); +#47305 = ORIENTED_EDGE('',*,*,#46007,.T.); +#47306 = ORIENTED_EDGE('',*,*,#47307,.T.); +#47307 = EDGE_CURVE('',#46000,#47308,#47310,.T.); +#47308 = VERTEX_POINT('',#47309); +#47309 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#47310 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47311,#47312),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47311 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#47312 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#47313 = ORIENTED_EDGE('',*,*,#47314,.F.); +#47314 = EDGE_CURVE('',#47315,#47308,#47317,.T.); +#47315 = VERTEX_POINT('',#47316); +#47316 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#47317 = LINE('',#47318,#47319); +#47318 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#47319 = VECTOR('',#47320,1.); +#47320 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#47321 = ORIENTED_EDGE('',*,*,#47322,.F.); +#47322 = EDGE_CURVE('',#47186,#47315,#47323,.T.); +#47323 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47324,#47325),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47324 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47325 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#47326 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#47327,#47328) + ,(#47329,#47330 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#47327 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#47328 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#47329 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#47330 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#47331 = ADVANCED_FACE('',(#47332),#47349,.F.); +#47332 = FACE_BOUND('',#47333,.F.); +#47333 = EDGE_LOOP('',(#47334,#47335,#47342,#47348)); +#47334 = ORIENTED_EDGE('',*,*,#45999,.T.); +#47335 = ORIENTED_EDGE('',*,*,#47336,.T.); +#47336 = EDGE_CURVE('',#45992,#47337,#47339,.T.); +#47337 = VERTEX_POINT('',#47338); +#47338 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#47339 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47340,#47341),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47340 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#47341 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#47342 = ORIENTED_EDGE('',*,*,#47343,.F.); +#47343 = EDGE_CURVE('',#47308,#47337,#47344,.T.); +#47344 = LINE('',#47345,#47346); +#47345 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#47346 = VECTOR('',#47347,1.); +#47347 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#47348 = ORIENTED_EDGE('',*,*,#47307,.F.); +#47349 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#47350,#47351) + ,(#47352,#47353 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#47350 = CARTESIAN_POINT('',(-1.875,4.7375,1.025)); +#47351 = CARTESIAN_POINT('',(-1.760171280765,4.680085640382,1.75)); +#47352 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#47353 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#47354 = ADVANCED_FACE('',(#47355),#47372,.F.); +#47355 = FACE_BOUND('',#47356,.F.); +#47356 = EDGE_LOOP('',(#47357,#47358,#47365,#47371)); +#47357 = ORIENTED_EDGE('',*,*,#45991,.T.); +#47358 = ORIENTED_EDGE('',*,*,#47359,.T.); +#47359 = EDGE_CURVE('',#45984,#47360,#47362,.T.); +#47360 = VERTEX_POINT('',#47361); +#47361 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#47362 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47363,#47364),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47363 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#47364 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#47365 = ORIENTED_EDGE('',*,*,#47366,.F.); +#47366 = EDGE_CURVE('',#47337,#47360,#47367,.T.); +#47367 = LINE('',#47368,#47369); +#47368 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#47369 = VECTOR('',#47370,1.); +#47370 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#47371 = ORIENTED_EDGE('',*,*,#47336,.F.); +#47372 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#47373,#47374) + ,(#47375,#47376 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#47373 = CARTESIAN_POINT('',(-1.7375,4.875,1.025)); +#47374 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#47375 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#47376 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#47377 = ADVANCED_FACE('',(#47378),#47395,.F.); +#47378 = FACE_BOUND('',#47379,.F.); +#47379 = EDGE_LOOP('',(#47380,#47381,#47388,#47394)); +#47380 = ORIENTED_EDGE('',*,*,#45983,.T.); +#47381 = ORIENTED_EDGE('',*,*,#47382,.T.); +#47382 = EDGE_CURVE('',#45976,#47383,#47385,.T.); +#47383 = VERTEX_POINT('',#47384); +#47384 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#47385 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47386,#47387),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47386 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47387 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#47388 = ORIENTED_EDGE('',*,*,#47389,.F.); +#47389 = EDGE_CURVE('',#47360,#47383,#47390,.T.); +#47390 = LINE('',#47391,#47392); +#47391 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#47392 = VECTOR('',#47393,1.); +#47393 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#47394 = ORIENTED_EDGE('',*,*,#47359,.F.); +#47395 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#47396,#47397) + ,(#47398,#47399 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#47396 = CARTESIAN_POINT('',(1.7375,4.875,1.025)); +#47397 = CARTESIAN_POINT('',(1.680085640382,4.760171280765,1.75)); +#47398 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47399 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#47400 = ADVANCED_FACE('',(#47401),#47546,.F.); +#47401 = FACE_BOUND('',#47402,.F.); +#47402 = EDGE_LOOP('',(#47403,#47404,#47412,#47420,#47428,#47436,#47444, + #47452,#47460,#47468,#47476,#47484,#47492,#47500,#47508,#47516, + #47524,#47532,#47539,#47545)); +#47403 = ORIENTED_EDGE('',*,*,#45975,.T.); +#47404 = ORIENTED_EDGE('',*,*,#47405,.T.); +#47405 = EDGE_CURVE('',#45968,#47406,#47408,.T.); +#47406 = VERTEX_POINT('',#47407); +#47407 = CARTESIAN_POINT('',(1.875,4.24,1.025)); +#47408 = LINE('',#47409,#47410); +#47409 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47410 = VECTOR('',#47411,1.); +#47411 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47412 = ORIENTED_EDGE('',*,*,#47413,.T.); +#47413 = EDGE_CURVE('',#47406,#47414,#47416,.T.); +#47414 = VERTEX_POINT('',#47415); +#47415 = CARTESIAN_POINT('',(1.875,3.38,1.025)); +#47416 = LINE('',#47417,#47418); +#47417 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47418 = VECTOR('',#47419,1.); +#47419 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47420 = ORIENTED_EDGE('',*,*,#47421,.T.); +#47421 = EDGE_CURVE('',#47414,#47422,#47424,.T.); +#47422 = VERTEX_POINT('',#47423); +#47423 = CARTESIAN_POINT('',(1.875,2.97,1.025)); +#47424 = LINE('',#47425,#47426); +#47425 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47426 = VECTOR('',#47427,1.); +#47427 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47428 = ORIENTED_EDGE('',*,*,#47429,.T.); +#47429 = EDGE_CURVE('',#47422,#47430,#47432,.T.); +#47430 = VERTEX_POINT('',#47431); +#47431 = CARTESIAN_POINT('',(1.875,2.11,1.025)); +#47432 = LINE('',#47433,#47434); +#47433 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47434 = VECTOR('',#47435,1.); +#47435 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47436 = ORIENTED_EDGE('',*,*,#47437,.T.); +#47437 = EDGE_CURVE('',#47430,#47438,#47440,.T.); +#47438 = VERTEX_POINT('',#47439); +#47439 = CARTESIAN_POINT('',(1.875,1.7,1.025)); +#47440 = LINE('',#47441,#47442); +#47441 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47442 = VECTOR('',#47443,1.); +#47443 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47444 = ORIENTED_EDGE('',*,*,#47445,.T.); +#47445 = EDGE_CURVE('',#47438,#47446,#47448,.T.); +#47446 = VERTEX_POINT('',#47447); +#47447 = CARTESIAN_POINT('',(1.875,0.84,1.025)); +#47448 = LINE('',#47449,#47450); +#47449 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47450 = VECTOR('',#47451,1.); +#47451 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47452 = ORIENTED_EDGE('',*,*,#47453,.T.); +#47453 = EDGE_CURVE('',#47446,#47454,#47456,.T.); +#47454 = VERTEX_POINT('',#47455); +#47455 = CARTESIAN_POINT('',(1.875,0.43,1.025)); +#47456 = LINE('',#47457,#47458); +#47457 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47458 = VECTOR('',#47459,1.); +#47459 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47460 = ORIENTED_EDGE('',*,*,#47461,.T.); +#47461 = EDGE_CURVE('',#47454,#47462,#47464,.T.); +#47462 = VERTEX_POINT('',#47463); +#47463 = CARTESIAN_POINT('',(1.875,-0.43,1.025)); +#47464 = LINE('',#47465,#47466); +#47465 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47466 = VECTOR('',#47467,1.); +#47467 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47468 = ORIENTED_EDGE('',*,*,#47469,.T.); +#47469 = EDGE_CURVE('',#47462,#47470,#47472,.T.); +#47470 = VERTEX_POINT('',#47471); +#47471 = CARTESIAN_POINT('',(1.875,-0.84,1.025)); +#47472 = LINE('',#47473,#47474); +#47473 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47474 = VECTOR('',#47475,1.); +#47475 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47476 = ORIENTED_EDGE('',*,*,#47477,.T.); +#47477 = EDGE_CURVE('',#47470,#47478,#47480,.T.); +#47478 = VERTEX_POINT('',#47479); +#47479 = CARTESIAN_POINT('',(1.875,-1.7,1.025)); +#47480 = LINE('',#47481,#47482); +#47481 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47482 = VECTOR('',#47483,1.); +#47483 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47484 = ORIENTED_EDGE('',*,*,#47485,.T.); +#47485 = EDGE_CURVE('',#47478,#47486,#47488,.T.); +#47486 = VERTEX_POINT('',#47487); +#47487 = CARTESIAN_POINT('',(1.875,-2.11,1.025)); +#47488 = LINE('',#47489,#47490); +#47489 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47490 = VECTOR('',#47491,1.); +#47491 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47492 = ORIENTED_EDGE('',*,*,#47493,.T.); +#47493 = EDGE_CURVE('',#47486,#47494,#47496,.T.); +#47494 = VERTEX_POINT('',#47495); +#47495 = CARTESIAN_POINT('',(1.875,-2.97,1.025)); +#47496 = LINE('',#47497,#47498); +#47497 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47498 = VECTOR('',#47499,1.); +#47499 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47500 = ORIENTED_EDGE('',*,*,#47501,.T.); +#47501 = EDGE_CURVE('',#47494,#47502,#47504,.T.); +#47502 = VERTEX_POINT('',#47503); +#47503 = CARTESIAN_POINT('',(1.875,-3.38,1.025)); +#47504 = LINE('',#47505,#47506); +#47505 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47506 = VECTOR('',#47507,1.); +#47507 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47508 = ORIENTED_EDGE('',*,*,#47509,.T.); +#47509 = EDGE_CURVE('',#47502,#47510,#47512,.T.); +#47510 = VERTEX_POINT('',#47511); +#47511 = CARTESIAN_POINT('',(1.875,-4.24,1.025)); +#47512 = LINE('',#47513,#47514); +#47513 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47514 = VECTOR('',#47515,1.); +#47515 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47516 = ORIENTED_EDGE('',*,*,#47517,.T.); +#47517 = EDGE_CURVE('',#47510,#47518,#47520,.T.); +#47518 = VERTEX_POINT('',#47519); +#47519 = CARTESIAN_POINT('',(1.875,-4.65,1.025)); +#47520 = LINE('',#47521,#47522); +#47521 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47522 = VECTOR('',#47523,1.); +#47523 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47524 = ORIENTED_EDGE('',*,*,#47525,.T.); +#47525 = EDGE_CURVE('',#47518,#47526,#47528,.T.); +#47526 = VERTEX_POINT('',#47527); +#47527 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#47528 = LINE('',#47529,#47530); +#47529 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47530 = VECTOR('',#47531,1.); +#47531 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47532 = ORIENTED_EDGE('',*,*,#47533,.T.); +#47533 = EDGE_CURVE('',#47526,#47534,#47536,.T.); +#47534 = VERTEX_POINT('',#47535); +#47535 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#47536 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#47537,#47538),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#47537 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#47538 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#47539 = ORIENTED_EDGE('',*,*,#47540,.F.); +#47540 = EDGE_CURVE('',#47383,#47534,#47541,.T.); +#47541 = LINE('',#47542,#47543); +#47542 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#47543 = VECTOR('',#47544,1.); +#47544 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47545 = ORIENTED_EDGE('',*,*,#47382,.F.); +#47546 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#47547,#47548) + ,(#47549,#47550 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#47547 = CARTESIAN_POINT('',(1.875,4.7375,1.025)); +#47548 = CARTESIAN_POINT('',(1.760171280765,4.680085640382,1.75)); +#47549 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#47550 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#47551 = ADVANCED_FACE('',(#47552),#47584,.F.); +#47552 = FACE_BOUND('',#47553,.F.); +#47553 = EDGE_LOOP('',(#47554,#47562,#47570,#47576,#47582,#47583)); +#47554 = ORIENTED_EDGE('',*,*,#47555,.F.); +#47555 = EDGE_CURVE('',#47556,#45960,#47558,.T.); +#47556 = VERTEX_POINT('',#47557); +#47557 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#47558 = LINE('',#47559,#47560); +#47559 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#47560 = VECTOR('',#47561,1.); +#47561 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47562 = ORIENTED_EDGE('',*,*,#47563,.T.); +#47563 = EDGE_CURVE('',#47556,#47564,#47566,.T.); +#47564 = VERTEX_POINT('',#47565); +#47565 = CARTESIAN_POINT('',(2.2,4.24,1.025)); +#47566 = LINE('',#47567,#47568); +#47567 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#47568 = VECTOR('',#47569,1.); +#47569 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#47570 = ORIENTED_EDGE('',*,*,#47571,.T.); +#47571 = EDGE_CURVE('',#47564,#46614,#47572,.T.); +#47572 = LINE('',#47573,#47574); +#47573 = CARTESIAN_POINT('',(2.2,4.24,1.025)); +#47574 = VECTOR('',#47575,1.); +#47575 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47576 = ORIENTED_EDGE('',*,*,#47577,.T.); +#47577 = EDGE_CURVE('',#46614,#47406,#47578,.T.); +#47578 = LINE('',#47579,#47580); +#47579 = CARTESIAN_POINT('',(2.2,4.24,1.025)); +#47580 = VECTOR('',#47581,1.); +#47581 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47582 = ORIENTED_EDGE('',*,*,#47405,.F.); +#47583 = ORIENTED_EDGE('',*,*,#45967,.F.); +#47584 = PLANE('',#47585); +#47585 = AXIS2_PLACEMENT_3D('',#47586,#47587,#47588); +#47586 = CARTESIAN_POINT('',(2.2,4.65,1.025)); +#47587 = DIRECTION('',(0.,0.,-1.)); +#47588 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#47589 = ADVANCED_FACE('',(#47590),#47633,.F.); +#47590 = FACE_BOUND('',#47591,.F.); +#47591 = EDGE_LOOP('',(#47592,#47593,#47599,#47600,#47608,#47616,#47622, + #47623,#47629,#47630,#47631,#47632)); +#47592 = ORIENTED_EDGE('',*,*,#46069,.T.); +#47593 = ORIENTED_EDGE('',*,*,#47594,.T.); +#47594 = EDGE_CURVE('',#46062,#47188,#47595,.T.); +#47595 = LINE('',#47596,#47597); +#47596 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#47597 = VECTOR('',#47598,1.); +#47598 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47599 = ORIENTED_EDGE('',*,*,#47185,.F.); +#47600 = ORIENTED_EDGE('',*,*,#47601,.F.); +#47601 = EDGE_CURVE('',#47602,#47186,#47604,.T.); +#47602 = VERTEX_POINT('',#47603); +#47603 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#47604 = LINE('',#47605,#47606); +#47605 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#47606 = VECTOR('',#47607,1.); +#47607 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#47608 = ORIENTED_EDGE('',*,*,#47609,.F.); +#47609 = EDGE_CURVE('',#47610,#47602,#47612,.T.); +#47610 = VERTEX_POINT('',#47611); +#47611 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#47612 = LINE('',#47613,#47614); +#47613 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#47614 = VECTOR('',#47615,1.); +#47615 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47616 = ORIENTED_EDGE('',*,*,#47617,.F.); +#47617 = EDGE_CURVE('',#47526,#47610,#47618,.T.); +#47618 = LINE('',#47619,#47620); +#47619 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#47620 = VECTOR('',#47621,1.); +#47621 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#47622 = ORIENTED_EDGE('',*,*,#47525,.F.); +#47623 = ORIENTED_EDGE('',*,*,#47624,.F.); +#47624 = EDGE_CURVE('',#47048,#47518,#47625,.T.); +#47625 = LINE('',#47626,#47627); +#47626 = CARTESIAN_POINT('',(2.2,-4.65,1.025)); +#47627 = VECTOR('',#47628,1.); +#47628 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#47629 = ORIENTED_EDGE('',*,*,#47063,.T.); +#47630 = ORIENTED_EDGE('',*,*,#47108,.T.); +#47631 = ORIENTED_EDGE('',*,*,#47125,.T.); +#47632 = ORIENTED_EDGE('',*,*,#47079,.T.); +#47633 = PLANE('',#47634); +#47634 = AXIS2_PLACEMENT_3D('',#47635,#47636,#47637); +#47635 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#47636 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#47637 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#47638 = ADVANCED_FACE('',(#47639),#47725,.F.); +#47639 = FACE_BOUND('',#47640,.F.); +#47640 = EDGE_LOOP('',(#47641,#47642,#47643,#47652,#47660,#47669,#47677, + #47685,#47693,#47702,#47710,#47719)); +#47641 = ORIENTED_EDGE('',*,*,#46061,.F.); +#47642 = ORIENTED_EDGE('',*,*,#46083,.T.); +#47643 = ORIENTED_EDGE('',*,*,#47644,.T.); +#47644 = EDGE_CURVE('',#46084,#47645,#47647,.T.); +#47645 = VERTEX_POINT('',#47646); +#47646 = CARTESIAN_POINT('',(-2.298480775301,-4.65,0.742364817767)); +#47647 = CIRCLE('',#47648,0.1); +#47648 = AXIS2_PLACEMENT_3D('',#47649,#47650,#47651); +#47649 = CARTESIAN_POINT('',(-2.2,-4.65,0.725)); +#47650 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47651 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47652 = ORIENTED_EDGE('',*,*,#47653,.T.); +#47653 = EDGE_CURVE('',#47645,#47654,#47656,.T.); +#47654 = VERTEX_POINT('',#47655); +#47655 = CARTESIAN_POINT('',(-2.379496640897,-4.65,0.2479055467)); +#47656 = LINE('',#47657,#47658); +#47657 = CARTESIAN_POINT('',(-2.298480775301,-4.65,0.742364817767)); +#47658 = VECTOR('',#47659,1.); +#47659 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47660 = ORIENTED_EDGE('',*,*,#47661,.T.); +#47661 = EDGE_CURVE('',#47654,#47662,#47664,.T.); +#47662 = VERTEX_POINT('',#47663); +#47663 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.)); +#47664 = CIRCLE('',#47665,0.3); +#47665 = AXIS2_PLACEMENT_3D('',#47666,#47667,#47668); +#47666 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.3)); +#47667 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47668 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47669 = ORIENTED_EDGE('',*,*,#47670,.T.); +#47670 = EDGE_CURVE('',#47662,#47671,#47673,.T.); +#47671 = VERTEX_POINT('',#47672); +#47672 = CARTESIAN_POINT('',(-3.,-4.65,0.)); +#47673 = LINE('',#47674,#47675); +#47674 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.)); +#47675 = VECTOR('',#47676,1.); +#47676 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47677 = ORIENTED_EDGE('',*,*,#47678,.T.); +#47678 = EDGE_CURVE('',#47671,#47679,#47681,.T.); +#47679 = VERTEX_POINT('',#47680); +#47680 = CARTESIAN_POINT('',(-3.,-4.65,0.2)); +#47681 = LINE('',#47682,#47683); +#47682 = CARTESIAN_POINT('',(-3.,-4.65,0.)); +#47683 = VECTOR('',#47684,1.); +#47684 = DIRECTION('',(0.,0.,1.)); +#47685 = ORIENTED_EDGE('',*,*,#47686,.T.); +#47686 = EDGE_CURVE('',#47679,#47687,#47689,.T.); +#47687 = VERTEX_POINT('',#47688); +#47688 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.2)); +#47689 = LINE('',#47690,#47691); +#47690 = CARTESIAN_POINT('',(-3.,-4.65,0.2)); +#47691 = VECTOR('',#47692,1.); +#47692 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47693 = ORIENTED_EDGE('',*,*,#47694,.T.); +#47694 = EDGE_CURVE('',#47687,#47695,#47697,.T.); +#47695 = VERTEX_POINT('',#47696); +#47696 = CARTESIAN_POINT('',(-2.5764581915,-4.65,0.282635182233)); +#47697 = CIRCLE('',#47698,0.1); +#47698 = AXIS2_PLACEMENT_3D('',#47699,#47700,#47701); +#47699 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.3)); +#47700 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47701 = DIRECTION('',(0.,0.,-1.)); +#47702 = ORIENTED_EDGE('',*,*,#47703,.T.); +#47703 = EDGE_CURVE('',#47695,#47704,#47706,.T.); +#47704 = VERTEX_POINT('',#47705); +#47705 = CARTESIAN_POINT('',(-2.495442325904,-4.65,0.7770944533)); +#47706 = LINE('',#47707,#47708); +#47707 = CARTESIAN_POINT('',(-2.5764581915,-4.65,0.282635182233)); +#47708 = VECTOR('',#47709,1.); +#47709 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47710 = ORIENTED_EDGE('',*,*,#47711,.T.); +#47711 = EDGE_CURVE('',#47704,#47712,#47714,.T.); +#47712 = VERTEX_POINT('',#47713); +#47713 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#47714 = CIRCLE('',#47715,0.3); +#47715 = AXIS2_PLACEMENT_3D('',#47716,#47717,#47718); +#47716 = CARTESIAN_POINT('',(-2.2,-4.65,0.725)); +#47717 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47718 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47719 = ORIENTED_EDGE('',*,*,#47720,.T.); +#47720 = EDGE_CURVE('',#47712,#46062,#47721,.T.); +#47721 = LINE('',#47722,#47723); +#47722 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#47723 = VECTOR('',#47724,1.); +#47724 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47725 = PLANE('',#47726); +#47726 = AXIS2_PLACEMENT_3D('',#47727,#47728,#47729); +#47727 = CARTESIAN_POINT('',(-2.410970442936,-4.65,0.528115505988)); +#47728 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47729 = DIRECTION('',(0.,-0.,1.)); +#47730 = ADVANCED_FACE('',(#47731),#47750,.F.); +#47731 = FACE_BOUND('',#47732,.F.); +#47732 = EDGE_LOOP('',(#47733,#47734,#47743,#47749)); +#47733 = ORIENTED_EDGE('',*,*,#46100,.T.); +#47734 = ORIENTED_EDGE('',*,*,#47735,.T.); +#47735 = EDGE_CURVE('',#46093,#47736,#47738,.T.); +#47736 = VERTEX_POINT('',#47737); +#47737 = CARTESIAN_POINT('',(-2.298480775301,-4.24,0.742364817767)); +#47738 = CIRCLE('',#47739,0.1); +#47739 = AXIS2_PLACEMENT_3D('',#47740,#47741,#47742); +#47740 = CARTESIAN_POINT('',(-2.2,-4.24,0.725)); +#47741 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47742 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47743 = ORIENTED_EDGE('',*,*,#47744,.F.); +#47744 = EDGE_CURVE('',#47645,#47736,#47745,.T.); +#47745 = LINE('',#47746,#47747); +#47746 = CARTESIAN_POINT('',(-2.298480775301,-4.65,0.742364817767)); +#47747 = VECTOR('',#47748,1.); +#47748 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47749 = ORIENTED_EDGE('',*,*,#47644,.F.); +#47750 = CYLINDRICAL_SURFACE('',#47751,0.1); +#47751 = AXIS2_PLACEMENT_3D('',#47752,#47753,#47754); +#47752 = CARTESIAN_POINT('',(-2.2,-4.65,0.725)); +#47753 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#47754 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47755 = ADVANCED_FACE('',(#47756),#47834,.T.); +#47756 = FACE_BOUND('',#47757,.T.); +#47757 = EDGE_LOOP('',(#47758,#47759,#47760,#47761,#47769,#47778,#47786, + #47794,#47802,#47811,#47819,#47828)); +#47758 = ORIENTED_EDGE('',*,*,#46114,.F.); +#47759 = ORIENTED_EDGE('',*,*,#46092,.T.); +#47760 = ORIENTED_EDGE('',*,*,#47735,.T.); +#47761 = ORIENTED_EDGE('',*,*,#47762,.T.); +#47762 = EDGE_CURVE('',#47736,#47763,#47765,.T.); +#47763 = VERTEX_POINT('',#47764); +#47764 = CARTESIAN_POINT('',(-2.379496640897,-4.24,0.2479055467)); +#47765 = LINE('',#47766,#47767); +#47766 = CARTESIAN_POINT('',(-2.298480775301,-4.24,0.742364817767)); +#47767 = VECTOR('',#47768,1.); +#47768 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47769 = ORIENTED_EDGE('',*,*,#47770,.T.); +#47770 = EDGE_CURVE('',#47763,#47771,#47773,.T.); +#47771 = VERTEX_POINT('',#47772); +#47772 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.)); +#47773 = CIRCLE('',#47774,0.3); +#47774 = AXIS2_PLACEMENT_3D('',#47775,#47776,#47777); +#47775 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.3)); +#47776 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47777 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47778 = ORIENTED_EDGE('',*,*,#47779,.T.); +#47779 = EDGE_CURVE('',#47771,#47780,#47782,.T.); +#47780 = VERTEX_POINT('',#47781); +#47781 = CARTESIAN_POINT('',(-3.,-4.24,0.)); +#47782 = LINE('',#47783,#47784); +#47783 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.)); +#47784 = VECTOR('',#47785,1.); +#47785 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47786 = ORIENTED_EDGE('',*,*,#47787,.T.); +#47787 = EDGE_CURVE('',#47780,#47788,#47790,.T.); +#47788 = VERTEX_POINT('',#47789); +#47789 = CARTESIAN_POINT('',(-3.,-4.24,0.2)); +#47790 = LINE('',#47791,#47792); +#47791 = CARTESIAN_POINT('',(-3.,-4.24,0.)); +#47792 = VECTOR('',#47793,1.); +#47793 = DIRECTION('',(0.,0.,1.)); +#47794 = ORIENTED_EDGE('',*,*,#47795,.T.); +#47795 = EDGE_CURVE('',#47788,#47796,#47798,.T.); +#47796 = VERTEX_POINT('',#47797); +#47797 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.2)); +#47798 = LINE('',#47799,#47800); +#47799 = CARTESIAN_POINT('',(-3.,-4.24,0.2)); +#47800 = VECTOR('',#47801,1.); +#47801 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47802 = ORIENTED_EDGE('',*,*,#47803,.T.); +#47803 = EDGE_CURVE('',#47796,#47804,#47806,.T.); +#47804 = VERTEX_POINT('',#47805); +#47805 = CARTESIAN_POINT('',(-2.5764581915,-4.24,0.282635182233)); +#47806 = CIRCLE('',#47807,0.1); +#47807 = AXIS2_PLACEMENT_3D('',#47808,#47809,#47810); +#47808 = CARTESIAN_POINT('',(-2.674938966801,-4.24,0.3)); +#47809 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47810 = DIRECTION('',(0.,0.,-1.)); +#47811 = ORIENTED_EDGE('',*,*,#47812,.T.); +#47812 = EDGE_CURVE('',#47804,#47813,#47815,.T.); +#47813 = VERTEX_POINT('',#47814); +#47814 = CARTESIAN_POINT('',(-2.495442325904,-4.24,0.7770944533)); +#47815 = LINE('',#47816,#47817); +#47816 = CARTESIAN_POINT('',(-2.5764581915,-4.24,0.282635182233)); +#47817 = VECTOR('',#47818,1.); +#47818 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47819 = ORIENTED_EDGE('',*,*,#47820,.T.); +#47820 = EDGE_CURVE('',#47813,#47821,#47823,.T.); +#47821 = VERTEX_POINT('',#47822); +#47822 = CARTESIAN_POINT('',(-2.2,-4.24,1.025)); +#47823 = CIRCLE('',#47824,0.3); +#47824 = AXIS2_PLACEMENT_3D('',#47825,#47826,#47827); +#47825 = CARTESIAN_POINT('',(-2.2,-4.24,0.725)); +#47826 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47827 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47828 = ORIENTED_EDGE('',*,*,#47829,.T.); +#47829 = EDGE_CURVE('',#47821,#46115,#47830,.T.); +#47830 = LINE('',#47831,#47832); +#47831 = CARTESIAN_POINT('',(-2.2,-4.24,1.025)); +#47832 = VECTOR('',#47833,1.); +#47833 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47834 = PLANE('',#47835); +#47835 = AXIS2_PLACEMENT_3D('',#47836,#47837,#47838); +#47836 = CARTESIAN_POINT('',(-2.410970442936,-4.24,0.528115505988)); +#47837 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47838 = DIRECTION('',(0.,-0.,1.)); +#47839 = ADVANCED_FACE('',(#47840),#47856,.F.); +#47840 = FACE_BOUND('',#47841,.F.); +#47841 = EDGE_LOOP('',(#47842,#47843,#47849,#47850)); +#47842 = ORIENTED_EDGE('',*,*,#46131,.T.); +#47843 = ORIENTED_EDGE('',*,*,#47844,.T.); +#47844 = EDGE_CURVE('',#46124,#47204,#47845,.T.); +#47845 = LINE('',#47846,#47847); +#47846 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#47847 = VECTOR('',#47848,1.); +#47848 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47849 = ORIENTED_EDGE('',*,*,#47203,.F.); +#47850 = ORIENTED_EDGE('',*,*,#47851,.F.); +#47851 = EDGE_CURVE('',#46115,#47196,#47852,.T.); +#47852 = LINE('',#47853,#47854); +#47853 = CARTESIAN_POINT('',(-2.2,-4.24,1.025)); +#47854 = VECTOR('',#47855,1.); +#47855 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47856 = PLANE('',#47857); +#47857 = AXIS2_PLACEMENT_3D('',#47858,#47859,#47860); +#47858 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#47859 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#47860 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#47861 = ADVANCED_FACE('',(#47862),#47948,.F.); +#47862 = FACE_BOUND('',#47863,.F.); +#47863 = EDGE_LOOP('',(#47864,#47865,#47866,#47875,#47883,#47892,#47900, + #47908,#47916,#47925,#47933,#47942)); +#47864 = ORIENTED_EDGE('',*,*,#46123,.F.); +#47865 = ORIENTED_EDGE('',*,*,#46145,.T.); +#47866 = ORIENTED_EDGE('',*,*,#47867,.T.); +#47867 = EDGE_CURVE('',#46146,#47868,#47870,.T.); +#47868 = VERTEX_POINT('',#47869); +#47869 = CARTESIAN_POINT('',(-2.298480775301,-3.38,0.742364817767)); +#47870 = CIRCLE('',#47871,0.1); +#47871 = AXIS2_PLACEMENT_3D('',#47872,#47873,#47874); +#47872 = CARTESIAN_POINT('',(-2.2,-3.38,0.725)); +#47873 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47874 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47875 = ORIENTED_EDGE('',*,*,#47876,.T.); +#47876 = EDGE_CURVE('',#47868,#47877,#47879,.T.); +#47877 = VERTEX_POINT('',#47878); +#47878 = CARTESIAN_POINT('',(-2.379496640897,-3.38,0.2479055467)); +#47879 = LINE('',#47880,#47881); +#47880 = CARTESIAN_POINT('',(-2.298480775301,-3.38,0.742364817767)); +#47881 = VECTOR('',#47882,1.); +#47882 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47883 = ORIENTED_EDGE('',*,*,#47884,.T.); +#47884 = EDGE_CURVE('',#47877,#47885,#47887,.T.); +#47885 = VERTEX_POINT('',#47886); +#47886 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.)); +#47887 = CIRCLE('',#47888,0.3); +#47888 = AXIS2_PLACEMENT_3D('',#47889,#47890,#47891); +#47889 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.3)); +#47890 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#47891 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#47892 = ORIENTED_EDGE('',*,*,#47893,.T.); +#47893 = EDGE_CURVE('',#47885,#47894,#47896,.T.); +#47894 = VERTEX_POINT('',#47895); +#47895 = CARTESIAN_POINT('',(-3.,-3.38,0.)); +#47896 = LINE('',#47897,#47898); +#47897 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.)); +#47898 = VECTOR('',#47899,1.); +#47899 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#47900 = ORIENTED_EDGE('',*,*,#47901,.T.); +#47901 = EDGE_CURVE('',#47894,#47902,#47904,.T.); +#47902 = VERTEX_POINT('',#47903); +#47903 = CARTESIAN_POINT('',(-3.,-3.38,0.2)); +#47904 = LINE('',#47905,#47906); +#47905 = CARTESIAN_POINT('',(-3.,-3.38,0.)); +#47906 = VECTOR('',#47907,1.); +#47907 = DIRECTION('',(0.,0.,1.)); +#47908 = ORIENTED_EDGE('',*,*,#47909,.T.); +#47909 = EDGE_CURVE('',#47902,#47910,#47912,.T.); +#47910 = VERTEX_POINT('',#47911); +#47911 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.2)); +#47912 = LINE('',#47913,#47914); +#47913 = CARTESIAN_POINT('',(-3.,-3.38,0.2)); +#47914 = VECTOR('',#47915,1.); +#47915 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47916 = ORIENTED_EDGE('',*,*,#47917,.T.); +#47917 = EDGE_CURVE('',#47910,#47918,#47920,.T.); +#47918 = VERTEX_POINT('',#47919); +#47919 = CARTESIAN_POINT('',(-2.5764581915,-3.38,0.282635182233)); +#47920 = CIRCLE('',#47921,0.1); +#47921 = AXIS2_PLACEMENT_3D('',#47922,#47923,#47924); +#47922 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.3)); +#47923 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#47924 = DIRECTION('',(0.,0.,-1.)); +#47925 = ORIENTED_EDGE('',*,*,#47926,.T.); +#47926 = EDGE_CURVE('',#47918,#47927,#47929,.T.); +#47927 = VERTEX_POINT('',#47928); +#47928 = CARTESIAN_POINT('',(-2.495442325904,-3.38,0.7770944533)); +#47929 = LINE('',#47930,#47931); +#47930 = CARTESIAN_POINT('',(-2.5764581915,-3.38,0.282635182233)); +#47931 = VECTOR('',#47932,1.); +#47932 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#47933 = ORIENTED_EDGE('',*,*,#47934,.T.); +#47934 = EDGE_CURVE('',#47927,#47935,#47937,.T.); +#47935 = VERTEX_POINT('',#47936); +#47936 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#47937 = CIRCLE('',#47938,0.3); +#47938 = AXIS2_PLACEMENT_3D('',#47939,#47940,#47941); +#47939 = CARTESIAN_POINT('',(-2.2,-3.38,0.725)); +#47940 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#47941 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#47942 = ORIENTED_EDGE('',*,*,#47943,.T.); +#47943 = EDGE_CURVE('',#47935,#46124,#47944,.T.); +#47944 = LINE('',#47945,#47946); +#47945 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#47946 = VECTOR('',#47947,1.); +#47947 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#47948 = PLANE('',#47949); +#47949 = AXIS2_PLACEMENT_3D('',#47950,#47951,#47952); +#47950 = CARTESIAN_POINT('',(-2.410970442936,-3.38,0.528115505988)); +#47951 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47952 = DIRECTION('',(0.,-0.,1.)); +#47953 = ADVANCED_FACE('',(#47954),#47973,.F.); +#47954 = FACE_BOUND('',#47955,.F.); +#47955 = EDGE_LOOP('',(#47956,#47957,#47966,#47972)); +#47956 = ORIENTED_EDGE('',*,*,#46162,.T.); +#47957 = ORIENTED_EDGE('',*,*,#47958,.T.); +#47958 = EDGE_CURVE('',#46155,#47959,#47961,.T.); +#47959 = VERTEX_POINT('',#47960); +#47960 = CARTESIAN_POINT('',(-2.298480775301,-2.97,0.742364817767)); +#47961 = CIRCLE('',#47962,0.1); +#47962 = AXIS2_PLACEMENT_3D('',#47963,#47964,#47965); +#47963 = CARTESIAN_POINT('',(-2.2,-2.97,0.725)); +#47964 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#47965 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47966 = ORIENTED_EDGE('',*,*,#47967,.F.); +#47967 = EDGE_CURVE('',#47868,#47959,#47968,.T.); +#47968 = LINE('',#47969,#47970); +#47969 = CARTESIAN_POINT('',(-2.298480775301,-3.38,0.742364817767)); +#47970 = VECTOR('',#47971,1.); +#47971 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#47972 = ORIENTED_EDGE('',*,*,#47867,.F.); +#47973 = CYLINDRICAL_SURFACE('',#47974,0.1); +#47974 = AXIS2_PLACEMENT_3D('',#47975,#47976,#47977); +#47975 = CARTESIAN_POINT('',(-2.2,-3.38,0.725)); +#47976 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#47977 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#47978 = ADVANCED_FACE('',(#47979),#48057,.T.); +#47979 = FACE_BOUND('',#47980,.T.); +#47980 = EDGE_LOOP('',(#47981,#47982,#47983,#47984,#47992,#48001,#48009, + #48017,#48025,#48034,#48042,#48051)); +#47981 = ORIENTED_EDGE('',*,*,#46176,.F.); +#47982 = ORIENTED_EDGE('',*,*,#46154,.T.); +#47983 = ORIENTED_EDGE('',*,*,#47958,.T.); +#47984 = ORIENTED_EDGE('',*,*,#47985,.T.); +#47985 = EDGE_CURVE('',#47959,#47986,#47988,.T.); +#47986 = VERTEX_POINT('',#47987); +#47987 = CARTESIAN_POINT('',(-2.379496640897,-2.97,0.2479055467)); +#47988 = LINE('',#47989,#47990); +#47989 = CARTESIAN_POINT('',(-2.298480775301,-2.97,0.742364817767)); +#47990 = VECTOR('',#47991,1.); +#47991 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#47992 = ORIENTED_EDGE('',*,*,#47993,.T.); +#47993 = EDGE_CURVE('',#47986,#47994,#47996,.T.); +#47994 = VERTEX_POINT('',#47995); +#47995 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.)); +#47996 = CIRCLE('',#47997,0.3); +#47997 = AXIS2_PLACEMENT_3D('',#47998,#47999,#48000); +#47998 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.3)); +#47999 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48000 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48001 = ORIENTED_EDGE('',*,*,#48002,.T.); +#48002 = EDGE_CURVE('',#47994,#48003,#48005,.T.); +#48003 = VERTEX_POINT('',#48004); +#48004 = CARTESIAN_POINT('',(-3.,-2.97,0.)); +#48005 = LINE('',#48006,#48007); +#48006 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.)); +#48007 = VECTOR('',#48008,1.); +#48008 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48009 = ORIENTED_EDGE('',*,*,#48010,.T.); +#48010 = EDGE_CURVE('',#48003,#48011,#48013,.T.); +#48011 = VERTEX_POINT('',#48012); +#48012 = CARTESIAN_POINT('',(-3.,-2.97,0.2)); +#48013 = LINE('',#48014,#48015); +#48014 = CARTESIAN_POINT('',(-3.,-2.97,0.)); +#48015 = VECTOR('',#48016,1.); +#48016 = DIRECTION('',(0.,0.,1.)); +#48017 = ORIENTED_EDGE('',*,*,#48018,.T.); +#48018 = EDGE_CURVE('',#48011,#48019,#48021,.T.); +#48019 = VERTEX_POINT('',#48020); +#48020 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.2)); +#48021 = LINE('',#48022,#48023); +#48022 = CARTESIAN_POINT('',(-3.,-2.97,0.2)); +#48023 = VECTOR('',#48024,1.); +#48024 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48025 = ORIENTED_EDGE('',*,*,#48026,.T.); +#48026 = EDGE_CURVE('',#48019,#48027,#48029,.T.); +#48027 = VERTEX_POINT('',#48028); +#48028 = CARTESIAN_POINT('',(-2.5764581915,-2.97,0.282635182233)); +#48029 = CIRCLE('',#48030,0.1); +#48030 = AXIS2_PLACEMENT_3D('',#48031,#48032,#48033); +#48031 = CARTESIAN_POINT('',(-2.674938966801,-2.97,0.3)); +#48032 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48033 = DIRECTION('',(0.,0.,-1.)); +#48034 = ORIENTED_EDGE('',*,*,#48035,.T.); +#48035 = EDGE_CURVE('',#48027,#48036,#48038,.T.); +#48036 = VERTEX_POINT('',#48037); +#48037 = CARTESIAN_POINT('',(-2.495442325904,-2.97,0.7770944533)); +#48038 = LINE('',#48039,#48040); +#48039 = CARTESIAN_POINT('',(-2.5764581915,-2.97,0.282635182233)); +#48040 = VECTOR('',#48041,1.); +#48041 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48042 = ORIENTED_EDGE('',*,*,#48043,.T.); +#48043 = EDGE_CURVE('',#48036,#48044,#48046,.T.); +#48044 = VERTEX_POINT('',#48045); +#48045 = CARTESIAN_POINT('',(-2.2,-2.97,1.025)); +#48046 = CIRCLE('',#48047,0.3); +#48047 = AXIS2_PLACEMENT_3D('',#48048,#48049,#48050); +#48048 = CARTESIAN_POINT('',(-2.2,-2.97,0.725)); +#48049 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48050 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48051 = ORIENTED_EDGE('',*,*,#48052,.T.); +#48052 = EDGE_CURVE('',#48044,#46177,#48053,.T.); +#48053 = LINE('',#48054,#48055); +#48054 = CARTESIAN_POINT('',(-2.2,-2.97,1.025)); +#48055 = VECTOR('',#48056,1.); +#48056 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48057 = PLANE('',#48058); +#48058 = AXIS2_PLACEMENT_3D('',#48059,#48060,#48061); +#48059 = CARTESIAN_POINT('',(-2.410970442936,-2.97,0.528115505988)); +#48060 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48061 = DIRECTION('',(0.,-0.,1.)); +#48062 = ADVANCED_FACE('',(#48063),#48079,.F.); +#48063 = FACE_BOUND('',#48064,.F.); +#48064 = EDGE_LOOP('',(#48065,#48066,#48072,#48073)); +#48065 = ORIENTED_EDGE('',*,*,#46193,.T.); +#48066 = ORIENTED_EDGE('',*,*,#48067,.T.); +#48067 = EDGE_CURVE('',#46186,#47220,#48068,.T.); +#48068 = LINE('',#48069,#48070); +#48069 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#48070 = VECTOR('',#48071,1.); +#48071 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48072 = ORIENTED_EDGE('',*,*,#47219,.F.); +#48073 = ORIENTED_EDGE('',*,*,#48074,.F.); +#48074 = EDGE_CURVE('',#46177,#47212,#48075,.T.); +#48075 = LINE('',#48076,#48077); +#48076 = CARTESIAN_POINT('',(-2.2,-2.97,1.025)); +#48077 = VECTOR('',#48078,1.); +#48078 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48079 = PLANE('',#48080); +#48080 = AXIS2_PLACEMENT_3D('',#48081,#48082,#48083); +#48081 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48082 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48083 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48084 = ADVANCED_FACE('',(#48085),#48171,.F.); +#48085 = FACE_BOUND('',#48086,.F.); +#48086 = EDGE_LOOP('',(#48087,#48088,#48089,#48098,#48106,#48115,#48123, + #48131,#48139,#48148,#48156,#48165)); +#48087 = ORIENTED_EDGE('',*,*,#46185,.F.); +#48088 = ORIENTED_EDGE('',*,*,#46207,.T.); +#48089 = ORIENTED_EDGE('',*,*,#48090,.T.); +#48090 = EDGE_CURVE('',#46208,#48091,#48093,.T.); +#48091 = VERTEX_POINT('',#48092); +#48092 = CARTESIAN_POINT('',(-2.298480775301,-2.11,0.742364817767)); +#48093 = CIRCLE('',#48094,0.1); +#48094 = AXIS2_PLACEMENT_3D('',#48095,#48096,#48097); +#48095 = CARTESIAN_POINT('',(-2.2,-2.11,0.725)); +#48096 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48097 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48098 = ORIENTED_EDGE('',*,*,#48099,.T.); +#48099 = EDGE_CURVE('',#48091,#48100,#48102,.T.); +#48100 = VERTEX_POINT('',#48101); +#48101 = CARTESIAN_POINT('',(-2.379496640897,-2.11,0.2479055467)); +#48102 = LINE('',#48103,#48104); +#48103 = CARTESIAN_POINT('',(-2.298480775301,-2.11,0.742364817767)); +#48104 = VECTOR('',#48105,1.); +#48105 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48106 = ORIENTED_EDGE('',*,*,#48107,.T.); +#48107 = EDGE_CURVE('',#48100,#48108,#48110,.T.); +#48108 = VERTEX_POINT('',#48109); +#48109 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.)); +#48110 = CIRCLE('',#48111,0.3); +#48111 = AXIS2_PLACEMENT_3D('',#48112,#48113,#48114); +#48112 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.3)); +#48113 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48114 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48115 = ORIENTED_EDGE('',*,*,#48116,.T.); +#48116 = EDGE_CURVE('',#48108,#48117,#48119,.T.); +#48117 = VERTEX_POINT('',#48118); +#48118 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#48119 = LINE('',#48120,#48121); +#48120 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.)); +#48121 = VECTOR('',#48122,1.); +#48122 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48123 = ORIENTED_EDGE('',*,*,#48124,.T.); +#48124 = EDGE_CURVE('',#48117,#48125,#48127,.T.); +#48125 = VERTEX_POINT('',#48126); +#48126 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#48127 = LINE('',#48128,#48129); +#48128 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#48129 = VECTOR('',#48130,1.); +#48130 = DIRECTION('',(0.,0.,1.)); +#48131 = ORIENTED_EDGE('',*,*,#48132,.T.); +#48132 = EDGE_CURVE('',#48125,#48133,#48135,.T.); +#48133 = VERTEX_POINT('',#48134); +#48134 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.2)); +#48135 = LINE('',#48136,#48137); +#48136 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#48137 = VECTOR('',#48138,1.); +#48138 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48139 = ORIENTED_EDGE('',*,*,#48140,.T.); +#48140 = EDGE_CURVE('',#48133,#48141,#48143,.T.); +#48141 = VERTEX_POINT('',#48142); +#48142 = CARTESIAN_POINT('',(-2.5764581915,-2.11,0.282635182233)); +#48143 = CIRCLE('',#48144,0.1); +#48144 = AXIS2_PLACEMENT_3D('',#48145,#48146,#48147); +#48145 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.3)); +#48146 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48147 = DIRECTION('',(0.,0.,-1.)); +#48148 = ORIENTED_EDGE('',*,*,#48149,.T.); +#48149 = EDGE_CURVE('',#48141,#48150,#48152,.T.); +#48150 = VERTEX_POINT('',#48151); +#48151 = CARTESIAN_POINT('',(-2.495442325904,-2.11,0.7770944533)); +#48152 = LINE('',#48153,#48154); +#48153 = CARTESIAN_POINT('',(-2.5764581915,-2.11,0.282635182233)); +#48154 = VECTOR('',#48155,1.); +#48155 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48156 = ORIENTED_EDGE('',*,*,#48157,.T.); +#48157 = EDGE_CURVE('',#48150,#48158,#48160,.T.); +#48158 = VERTEX_POINT('',#48159); +#48159 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#48160 = CIRCLE('',#48161,0.3); +#48161 = AXIS2_PLACEMENT_3D('',#48162,#48163,#48164); +#48162 = CARTESIAN_POINT('',(-2.2,-2.11,0.725)); +#48163 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48164 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48165 = ORIENTED_EDGE('',*,*,#48166,.T.); +#48166 = EDGE_CURVE('',#48158,#46186,#48167,.T.); +#48167 = LINE('',#48168,#48169); +#48168 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#48169 = VECTOR('',#48170,1.); +#48170 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48171 = PLANE('',#48172); +#48172 = AXIS2_PLACEMENT_3D('',#48173,#48174,#48175); +#48173 = CARTESIAN_POINT('',(-2.410970442936,-2.11,0.528115505988)); +#48174 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48175 = DIRECTION('',(0.,-0.,1.)); +#48176 = ADVANCED_FACE('',(#48177),#48196,.F.); +#48177 = FACE_BOUND('',#48178,.F.); +#48178 = EDGE_LOOP('',(#48179,#48180,#48189,#48195)); +#48179 = ORIENTED_EDGE('',*,*,#46224,.T.); +#48180 = ORIENTED_EDGE('',*,*,#48181,.T.); +#48181 = EDGE_CURVE('',#46217,#48182,#48184,.T.); +#48182 = VERTEX_POINT('',#48183); +#48183 = CARTESIAN_POINT('',(-2.298480775301,-1.7,0.742364817767)); +#48184 = CIRCLE('',#48185,0.1); +#48185 = AXIS2_PLACEMENT_3D('',#48186,#48187,#48188); +#48186 = CARTESIAN_POINT('',(-2.2,-1.7,0.725)); +#48187 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48188 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48189 = ORIENTED_EDGE('',*,*,#48190,.F.); +#48190 = EDGE_CURVE('',#48091,#48182,#48191,.T.); +#48191 = LINE('',#48192,#48193); +#48192 = CARTESIAN_POINT('',(-2.298480775301,-2.11,0.742364817767)); +#48193 = VECTOR('',#48194,1.); +#48194 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48195 = ORIENTED_EDGE('',*,*,#48090,.F.); +#48196 = CYLINDRICAL_SURFACE('',#48197,0.1); +#48197 = AXIS2_PLACEMENT_3D('',#48198,#48199,#48200); +#48198 = CARTESIAN_POINT('',(-2.2,-2.11,0.725)); +#48199 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#48200 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48201 = ADVANCED_FACE('',(#48202),#48280,.T.); +#48202 = FACE_BOUND('',#48203,.T.); +#48203 = EDGE_LOOP('',(#48204,#48205,#48206,#48207,#48215,#48224,#48232, + #48240,#48248,#48257,#48265,#48274)); +#48204 = ORIENTED_EDGE('',*,*,#46238,.F.); +#48205 = ORIENTED_EDGE('',*,*,#46216,.T.); +#48206 = ORIENTED_EDGE('',*,*,#48181,.T.); +#48207 = ORIENTED_EDGE('',*,*,#48208,.T.); +#48208 = EDGE_CURVE('',#48182,#48209,#48211,.T.); +#48209 = VERTEX_POINT('',#48210); +#48210 = CARTESIAN_POINT('',(-2.379496640897,-1.7,0.2479055467)); +#48211 = LINE('',#48212,#48213); +#48212 = CARTESIAN_POINT('',(-2.298480775301,-1.7,0.742364817767)); +#48213 = VECTOR('',#48214,1.); +#48214 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48215 = ORIENTED_EDGE('',*,*,#48216,.T.); +#48216 = EDGE_CURVE('',#48209,#48217,#48219,.T.); +#48217 = VERTEX_POINT('',#48218); +#48218 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.)); +#48219 = CIRCLE('',#48220,0.3); +#48220 = AXIS2_PLACEMENT_3D('',#48221,#48222,#48223); +#48221 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.3)); +#48222 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48223 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48224 = ORIENTED_EDGE('',*,*,#48225,.T.); +#48225 = EDGE_CURVE('',#48217,#48226,#48228,.T.); +#48226 = VERTEX_POINT('',#48227); +#48227 = CARTESIAN_POINT('',(-3.,-1.7,0.)); +#48228 = LINE('',#48229,#48230); +#48229 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.)); +#48230 = VECTOR('',#48231,1.); +#48231 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48232 = ORIENTED_EDGE('',*,*,#48233,.T.); +#48233 = EDGE_CURVE('',#48226,#48234,#48236,.T.); +#48234 = VERTEX_POINT('',#48235); +#48235 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#48236 = LINE('',#48237,#48238); +#48237 = CARTESIAN_POINT('',(-3.,-1.7,0.)); +#48238 = VECTOR('',#48239,1.); +#48239 = DIRECTION('',(0.,0.,1.)); +#48240 = ORIENTED_EDGE('',*,*,#48241,.T.); +#48241 = EDGE_CURVE('',#48234,#48242,#48244,.T.); +#48242 = VERTEX_POINT('',#48243); +#48243 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.2)); +#48244 = LINE('',#48245,#48246); +#48245 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#48246 = VECTOR('',#48247,1.); +#48247 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48248 = ORIENTED_EDGE('',*,*,#48249,.T.); +#48249 = EDGE_CURVE('',#48242,#48250,#48252,.T.); +#48250 = VERTEX_POINT('',#48251); +#48251 = CARTESIAN_POINT('',(-2.5764581915,-1.7,0.282635182233)); +#48252 = CIRCLE('',#48253,0.1); +#48253 = AXIS2_PLACEMENT_3D('',#48254,#48255,#48256); +#48254 = CARTESIAN_POINT('',(-2.674938966801,-1.7,0.3)); +#48255 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48256 = DIRECTION('',(0.,0.,-1.)); +#48257 = ORIENTED_EDGE('',*,*,#48258,.T.); +#48258 = EDGE_CURVE('',#48250,#48259,#48261,.T.); +#48259 = VERTEX_POINT('',#48260); +#48260 = CARTESIAN_POINT('',(-2.495442325904,-1.7,0.7770944533)); +#48261 = LINE('',#48262,#48263); +#48262 = CARTESIAN_POINT('',(-2.5764581915,-1.7,0.282635182233)); +#48263 = VECTOR('',#48264,1.); +#48264 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48265 = ORIENTED_EDGE('',*,*,#48266,.T.); +#48266 = EDGE_CURVE('',#48259,#48267,#48269,.T.); +#48267 = VERTEX_POINT('',#48268); +#48268 = CARTESIAN_POINT('',(-2.2,-1.7,1.025)); +#48269 = CIRCLE('',#48270,0.3); +#48270 = AXIS2_PLACEMENT_3D('',#48271,#48272,#48273); +#48271 = CARTESIAN_POINT('',(-2.2,-1.7,0.725)); +#48272 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48273 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48274 = ORIENTED_EDGE('',*,*,#48275,.T.); +#48275 = EDGE_CURVE('',#48267,#46239,#48276,.T.); +#48276 = LINE('',#48277,#48278); +#48277 = CARTESIAN_POINT('',(-2.2,-1.7,1.025)); +#48278 = VECTOR('',#48279,1.); +#48279 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48280 = PLANE('',#48281); +#48281 = AXIS2_PLACEMENT_3D('',#48282,#48283,#48284); +#48282 = CARTESIAN_POINT('',(-2.410970442936,-1.7,0.528115505988)); +#48283 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48284 = DIRECTION('',(0.,-0.,1.)); +#48285 = ADVANCED_FACE('',(#48286),#48302,.F.); +#48286 = FACE_BOUND('',#48287,.F.); +#48287 = EDGE_LOOP('',(#48288,#48289,#48295,#48296)); +#48288 = ORIENTED_EDGE('',*,*,#46255,.T.); +#48289 = ORIENTED_EDGE('',*,*,#48290,.T.); +#48290 = EDGE_CURVE('',#46248,#47236,#48291,.T.); +#48291 = LINE('',#48292,#48293); +#48292 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#48293 = VECTOR('',#48294,1.); +#48294 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48295 = ORIENTED_EDGE('',*,*,#47235,.F.); +#48296 = ORIENTED_EDGE('',*,*,#48297,.F.); +#48297 = EDGE_CURVE('',#46239,#47228,#48298,.T.); +#48298 = LINE('',#48299,#48300); +#48299 = CARTESIAN_POINT('',(-2.2,-1.7,1.025)); +#48300 = VECTOR('',#48301,1.); +#48301 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48302 = PLANE('',#48303); +#48303 = AXIS2_PLACEMENT_3D('',#48304,#48305,#48306); +#48304 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48305 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48306 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48307 = ADVANCED_FACE('',(#48308),#48394,.F.); +#48308 = FACE_BOUND('',#48309,.F.); +#48309 = EDGE_LOOP('',(#48310,#48311,#48312,#48321,#48329,#48338,#48346, + #48354,#48362,#48371,#48379,#48388)); +#48310 = ORIENTED_EDGE('',*,*,#46247,.F.); +#48311 = ORIENTED_EDGE('',*,*,#46269,.T.); +#48312 = ORIENTED_EDGE('',*,*,#48313,.T.); +#48313 = EDGE_CURVE('',#46270,#48314,#48316,.T.); +#48314 = VERTEX_POINT('',#48315); +#48315 = CARTESIAN_POINT('',(-2.298480775301,-0.84,0.742364817767)); +#48316 = CIRCLE('',#48317,0.1); +#48317 = AXIS2_PLACEMENT_3D('',#48318,#48319,#48320); +#48318 = CARTESIAN_POINT('',(-2.2,-0.84,0.725)); +#48319 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48320 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48321 = ORIENTED_EDGE('',*,*,#48322,.T.); +#48322 = EDGE_CURVE('',#48314,#48323,#48325,.T.); +#48323 = VERTEX_POINT('',#48324); +#48324 = CARTESIAN_POINT('',(-2.379496640897,-0.84,0.2479055467)); +#48325 = LINE('',#48326,#48327); +#48326 = CARTESIAN_POINT('',(-2.298480775301,-0.84,0.742364817767)); +#48327 = VECTOR('',#48328,1.); +#48328 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48329 = ORIENTED_EDGE('',*,*,#48330,.T.); +#48330 = EDGE_CURVE('',#48323,#48331,#48333,.T.); +#48331 = VERTEX_POINT('',#48332); +#48332 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.)); +#48333 = CIRCLE('',#48334,0.3); +#48334 = AXIS2_PLACEMENT_3D('',#48335,#48336,#48337); +#48335 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.3)); +#48336 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48337 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48338 = ORIENTED_EDGE('',*,*,#48339,.T.); +#48339 = EDGE_CURVE('',#48331,#48340,#48342,.T.); +#48340 = VERTEX_POINT('',#48341); +#48341 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#48342 = LINE('',#48343,#48344); +#48343 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.)); +#48344 = VECTOR('',#48345,1.); +#48345 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48346 = ORIENTED_EDGE('',*,*,#48347,.T.); +#48347 = EDGE_CURVE('',#48340,#48348,#48350,.T.); +#48348 = VERTEX_POINT('',#48349); +#48349 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#48350 = LINE('',#48351,#48352); +#48351 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#48352 = VECTOR('',#48353,1.); +#48353 = DIRECTION('',(0.,0.,1.)); +#48354 = ORIENTED_EDGE('',*,*,#48355,.T.); +#48355 = EDGE_CURVE('',#48348,#48356,#48358,.T.); +#48356 = VERTEX_POINT('',#48357); +#48357 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.2)); +#48358 = LINE('',#48359,#48360); +#48359 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#48360 = VECTOR('',#48361,1.); +#48361 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48362 = ORIENTED_EDGE('',*,*,#48363,.T.); +#48363 = EDGE_CURVE('',#48356,#48364,#48366,.T.); +#48364 = VERTEX_POINT('',#48365); +#48365 = CARTESIAN_POINT('',(-2.5764581915,-0.84,0.282635182233)); +#48366 = CIRCLE('',#48367,0.1); +#48367 = AXIS2_PLACEMENT_3D('',#48368,#48369,#48370); +#48368 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.3)); +#48369 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48370 = DIRECTION('',(0.,0.,-1.)); +#48371 = ORIENTED_EDGE('',*,*,#48372,.T.); +#48372 = EDGE_CURVE('',#48364,#48373,#48375,.T.); +#48373 = VERTEX_POINT('',#48374); +#48374 = CARTESIAN_POINT('',(-2.495442325904,-0.84,0.7770944533)); +#48375 = LINE('',#48376,#48377); +#48376 = CARTESIAN_POINT('',(-2.5764581915,-0.84,0.282635182233)); +#48377 = VECTOR('',#48378,1.); +#48378 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48379 = ORIENTED_EDGE('',*,*,#48380,.T.); +#48380 = EDGE_CURVE('',#48373,#48381,#48383,.T.); +#48381 = VERTEX_POINT('',#48382); +#48382 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#48383 = CIRCLE('',#48384,0.3); +#48384 = AXIS2_PLACEMENT_3D('',#48385,#48386,#48387); +#48385 = CARTESIAN_POINT('',(-2.2,-0.84,0.725)); +#48386 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48387 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48388 = ORIENTED_EDGE('',*,*,#48389,.T.); +#48389 = EDGE_CURVE('',#48381,#46248,#48390,.T.); +#48390 = LINE('',#48391,#48392); +#48391 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#48392 = VECTOR('',#48393,1.); +#48393 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48394 = PLANE('',#48395); +#48395 = AXIS2_PLACEMENT_3D('',#48396,#48397,#48398); +#48396 = CARTESIAN_POINT('',(-2.410970442936,-0.84,0.528115505988)); +#48397 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48398 = DIRECTION('',(0.,-0.,1.)); +#48399 = ADVANCED_FACE('',(#48400),#48419,.F.); +#48400 = FACE_BOUND('',#48401,.F.); +#48401 = EDGE_LOOP('',(#48402,#48403,#48412,#48418)); +#48402 = ORIENTED_EDGE('',*,*,#46286,.T.); +#48403 = ORIENTED_EDGE('',*,*,#48404,.T.); +#48404 = EDGE_CURVE('',#46279,#48405,#48407,.T.); +#48405 = VERTEX_POINT('',#48406); +#48406 = CARTESIAN_POINT('',(-2.298480775301,-0.43,0.742364817767)); +#48407 = CIRCLE('',#48408,0.1); +#48408 = AXIS2_PLACEMENT_3D('',#48409,#48410,#48411); +#48409 = CARTESIAN_POINT('',(-2.2,-0.43,0.725)); +#48410 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48411 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48412 = ORIENTED_EDGE('',*,*,#48413,.F.); +#48413 = EDGE_CURVE('',#48314,#48405,#48414,.T.); +#48414 = LINE('',#48415,#48416); +#48415 = CARTESIAN_POINT('',(-2.298480775301,-0.84,0.742364817767)); +#48416 = VECTOR('',#48417,1.); +#48417 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48418 = ORIENTED_EDGE('',*,*,#48313,.F.); +#48419 = CYLINDRICAL_SURFACE('',#48420,0.1); +#48420 = AXIS2_PLACEMENT_3D('',#48421,#48422,#48423); +#48421 = CARTESIAN_POINT('',(-2.2,-0.84,0.725)); +#48422 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#48423 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48424 = ADVANCED_FACE('',(#48425),#48503,.T.); +#48425 = FACE_BOUND('',#48426,.T.); +#48426 = EDGE_LOOP('',(#48427,#48428,#48429,#48430,#48438,#48447,#48455, + #48463,#48471,#48480,#48488,#48497)); +#48427 = ORIENTED_EDGE('',*,*,#46300,.F.); +#48428 = ORIENTED_EDGE('',*,*,#46278,.T.); +#48429 = ORIENTED_EDGE('',*,*,#48404,.T.); +#48430 = ORIENTED_EDGE('',*,*,#48431,.T.); +#48431 = EDGE_CURVE('',#48405,#48432,#48434,.T.); +#48432 = VERTEX_POINT('',#48433); +#48433 = CARTESIAN_POINT('',(-2.379496640897,-0.43,0.2479055467)); +#48434 = LINE('',#48435,#48436); +#48435 = CARTESIAN_POINT('',(-2.298480775301,-0.43,0.742364817767)); +#48436 = VECTOR('',#48437,1.); +#48437 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48438 = ORIENTED_EDGE('',*,*,#48439,.T.); +#48439 = EDGE_CURVE('',#48432,#48440,#48442,.T.); +#48440 = VERTEX_POINT('',#48441); +#48441 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.)); +#48442 = CIRCLE('',#48443,0.3); +#48443 = AXIS2_PLACEMENT_3D('',#48444,#48445,#48446); +#48444 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.3)); +#48445 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48446 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48447 = ORIENTED_EDGE('',*,*,#48448,.T.); +#48448 = EDGE_CURVE('',#48440,#48449,#48451,.T.); +#48449 = VERTEX_POINT('',#48450); +#48450 = CARTESIAN_POINT('',(-3.,-0.43,0.)); +#48451 = LINE('',#48452,#48453); +#48452 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.)); +#48453 = VECTOR('',#48454,1.); +#48454 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48455 = ORIENTED_EDGE('',*,*,#48456,.T.); +#48456 = EDGE_CURVE('',#48449,#48457,#48459,.T.); +#48457 = VERTEX_POINT('',#48458); +#48458 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#48459 = LINE('',#48460,#48461); +#48460 = CARTESIAN_POINT('',(-3.,-0.43,0.)); +#48461 = VECTOR('',#48462,1.); +#48462 = DIRECTION('',(0.,0.,1.)); +#48463 = ORIENTED_EDGE('',*,*,#48464,.T.); +#48464 = EDGE_CURVE('',#48457,#48465,#48467,.T.); +#48465 = VERTEX_POINT('',#48466); +#48466 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.2)); +#48467 = LINE('',#48468,#48469); +#48468 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#48469 = VECTOR('',#48470,1.); +#48470 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48471 = ORIENTED_EDGE('',*,*,#48472,.T.); +#48472 = EDGE_CURVE('',#48465,#48473,#48475,.T.); +#48473 = VERTEX_POINT('',#48474); +#48474 = CARTESIAN_POINT('',(-2.5764581915,-0.43,0.282635182233)); +#48475 = CIRCLE('',#48476,0.1); +#48476 = AXIS2_PLACEMENT_3D('',#48477,#48478,#48479); +#48477 = CARTESIAN_POINT('',(-2.674938966801,-0.43,0.3)); +#48478 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48479 = DIRECTION('',(0.,0.,-1.)); +#48480 = ORIENTED_EDGE('',*,*,#48481,.T.); +#48481 = EDGE_CURVE('',#48473,#48482,#48484,.T.); +#48482 = VERTEX_POINT('',#48483); +#48483 = CARTESIAN_POINT('',(-2.495442325904,-0.43,0.7770944533)); +#48484 = LINE('',#48485,#48486); +#48485 = CARTESIAN_POINT('',(-2.5764581915,-0.43,0.282635182233)); +#48486 = VECTOR('',#48487,1.); +#48487 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48488 = ORIENTED_EDGE('',*,*,#48489,.T.); +#48489 = EDGE_CURVE('',#48482,#48490,#48492,.T.); +#48490 = VERTEX_POINT('',#48491); +#48491 = CARTESIAN_POINT('',(-2.2,-0.43,1.025)); +#48492 = CIRCLE('',#48493,0.3); +#48493 = AXIS2_PLACEMENT_3D('',#48494,#48495,#48496); +#48494 = CARTESIAN_POINT('',(-2.2,-0.43,0.725)); +#48495 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48496 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48497 = ORIENTED_EDGE('',*,*,#48498,.T.); +#48498 = EDGE_CURVE('',#48490,#46301,#48499,.T.); +#48499 = LINE('',#48500,#48501); +#48500 = CARTESIAN_POINT('',(-2.2,-0.43,1.025)); +#48501 = VECTOR('',#48502,1.); +#48502 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48503 = PLANE('',#48504); +#48504 = AXIS2_PLACEMENT_3D('',#48505,#48506,#48507); +#48505 = CARTESIAN_POINT('',(-2.410970442936,-0.43,0.528115505988)); +#48506 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48507 = DIRECTION('',(0.,-0.,1.)); +#48508 = ADVANCED_FACE('',(#48509),#48525,.F.); +#48509 = FACE_BOUND('',#48510,.F.); +#48510 = EDGE_LOOP('',(#48511,#48512,#48518,#48519)); +#48511 = ORIENTED_EDGE('',*,*,#46317,.T.); +#48512 = ORIENTED_EDGE('',*,*,#48513,.T.); +#48513 = EDGE_CURVE('',#46310,#47252,#48514,.T.); +#48514 = LINE('',#48515,#48516); +#48515 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#48516 = VECTOR('',#48517,1.); +#48517 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48518 = ORIENTED_EDGE('',*,*,#47251,.F.); +#48519 = ORIENTED_EDGE('',*,*,#48520,.F.); +#48520 = EDGE_CURVE('',#46301,#47244,#48521,.T.); +#48521 = LINE('',#48522,#48523); +#48522 = CARTESIAN_POINT('',(-2.2,-0.43,1.025)); +#48523 = VECTOR('',#48524,1.); +#48524 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48525 = PLANE('',#48526); +#48526 = AXIS2_PLACEMENT_3D('',#48527,#48528,#48529); +#48527 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48528 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48529 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48530 = ADVANCED_FACE('',(#48531),#48617,.F.); +#48531 = FACE_BOUND('',#48532,.F.); +#48532 = EDGE_LOOP('',(#48533,#48534,#48535,#48544,#48552,#48561,#48569, + #48577,#48585,#48594,#48602,#48611)); +#48533 = ORIENTED_EDGE('',*,*,#46309,.F.); +#48534 = ORIENTED_EDGE('',*,*,#46331,.T.); +#48535 = ORIENTED_EDGE('',*,*,#48536,.T.); +#48536 = EDGE_CURVE('',#46332,#48537,#48539,.T.); +#48537 = VERTEX_POINT('',#48538); +#48538 = CARTESIAN_POINT('',(-2.298480775301,0.43,0.742364817767)); +#48539 = CIRCLE('',#48540,0.1); +#48540 = AXIS2_PLACEMENT_3D('',#48541,#48542,#48543); +#48541 = CARTESIAN_POINT('',(-2.2,0.43,0.725)); +#48542 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48543 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48544 = ORIENTED_EDGE('',*,*,#48545,.T.); +#48545 = EDGE_CURVE('',#48537,#48546,#48548,.T.); +#48546 = VERTEX_POINT('',#48547); +#48547 = CARTESIAN_POINT('',(-2.379496640897,0.43,0.2479055467)); +#48548 = LINE('',#48549,#48550); +#48549 = CARTESIAN_POINT('',(-2.298480775301,0.43,0.742364817767)); +#48550 = VECTOR('',#48551,1.); +#48551 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48552 = ORIENTED_EDGE('',*,*,#48553,.T.); +#48553 = EDGE_CURVE('',#48546,#48554,#48556,.T.); +#48554 = VERTEX_POINT('',#48555); +#48555 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.)); +#48556 = CIRCLE('',#48557,0.3); +#48557 = AXIS2_PLACEMENT_3D('',#48558,#48559,#48560); +#48558 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.3)); +#48559 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48560 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48561 = ORIENTED_EDGE('',*,*,#48562,.T.); +#48562 = EDGE_CURVE('',#48554,#48563,#48565,.T.); +#48563 = VERTEX_POINT('',#48564); +#48564 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#48565 = LINE('',#48566,#48567); +#48566 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.)); +#48567 = VECTOR('',#48568,1.); +#48568 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48569 = ORIENTED_EDGE('',*,*,#48570,.T.); +#48570 = EDGE_CURVE('',#48563,#48571,#48573,.T.); +#48571 = VERTEX_POINT('',#48572); +#48572 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#48573 = LINE('',#48574,#48575); +#48574 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#48575 = VECTOR('',#48576,1.); +#48576 = DIRECTION('',(0.,0.,1.)); +#48577 = ORIENTED_EDGE('',*,*,#48578,.T.); +#48578 = EDGE_CURVE('',#48571,#48579,#48581,.T.); +#48579 = VERTEX_POINT('',#48580); +#48580 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.2)); +#48581 = LINE('',#48582,#48583); +#48582 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#48583 = VECTOR('',#48584,1.); +#48584 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48585 = ORIENTED_EDGE('',*,*,#48586,.T.); +#48586 = EDGE_CURVE('',#48579,#48587,#48589,.T.); +#48587 = VERTEX_POINT('',#48588); +#48588 = CARTESIAN_POINT('',(-2.5764581915,0.43,0.282635182233)); +#48589 = CIRCLE('',#48590,0.1); +#48590 = AXIS2_PLACEMENT_3D('',#48591,#48592,#48593); +#48591 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.3)); +#48592 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48593 = DIRECTION('',(0.,0.,-1.)); +#48594 = ORIENTED_EDGE('',*,*,#48595,.T.); +#48595 = EDGE_CURVE('',#48587,#48596,#48598,.T.); +#48596 = VERTEX_POINT('',#48597); +#48597 = CARTESIAN_POINT('',(-2.495442325904,0.43,0.7770944533)); +#48598 = LINE('',#48599,#48600); +#48599 = CARTESIAN_POINT('',(-2.5764581915,0.43,0.282635182233)); +#48600 = VECTOR('',#48601,1.); +#48601 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48602 = ORIENTED_EDGE('',*,*,#48603,.T.); +#48603 = EDGE_CURVE('',#48596,#48604,#48606,.T.); +#48604 = VERTEX_POINT('',#48605); +#48605 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#48606 = CIRCLE('',#48607,0.3); +#48607 = AXIS2_PLACEMENT_3D('',#48608,#48609,#48610); +#48608 = CARTESIAN_POINT('',(-2.2,0.43,0.725)); +#48609 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48610 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48611 = ORIENTED_EDGE('',*,*,#48612,.T.); +#48612 = EDGE_CURVE('',#48604,#46310,#48613,.T.); +#48613 = LINE('',#48614,#48615); +#48614 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#48615 = VECTOR('',#48616,1.); +#48616 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48617 = PLANE('',#48618); +#48618 = AXIS2_PLACEMENT_3D('',#48619,#48620,#48621); +#48619 = CARTESIAN_POINT('',(-2.410970442936,0.43,0.528115505988)); +#48620 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48621 = DIRECTION('',(0.,-0.,1.)); +#48622 = ADVANCED_FACE('',(#48623),#48642,.F.); +#48623 = FACE_BOUND('',#48624,.F.); +#48624 = EDGE_LOOP('',(#48625,#48626,#48635,#48641)); +#48625 = ORIENTED_EDGE('',*,*,#46348,.T.); +#48626 = ORIENTED_EDGE('',*,*,#48627,.T.); +#48627 = EDGE_CURVE('',#46341,#48628,#48630,.T.); +#48628 = VERTEX_POINT('',#48629); +#48629 = CARTESIAN_POINT('',(-2.298480775301,0.84,0.742364817767)); +#48630 = CIRCLE('',#48631,0.1); +#48631 = AXIS2_PLACEMENT_3D('',#48632,#48633,#48634); +#48632 = CARTESIAN_POINT('',(-2.2,0.84,0.725)); +#48633 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48634 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48635 = ORIENTED_EDGE('',*,*,#48636,.F.); +#48636 = EDGE_CURVE('',#48537,#48628,#48637,.T.); +#48637 = LINE('',#48638,#48639); +#48638 = CARTESIAN_POINT('',(-2.298480775301,0.43,0.742364817767)); +#48639 = VECTOR('',#48640,1.); +#48640 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48641 = ORIENTED_EDGE('',*,*,#48536,.F.); +#48642 = CYLINDRICAL_SURFACE('',#48643,0.1); +#48643 = AXIS2_PLACEMENT_3D('',#48644,#48645,#48646); +#48644 = CARTESIAN_POINT('',(-2.2,0.43,0.725)); +#48645 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#48646 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48647 = ADVANCED_FACE('',(#48648),#48726,.T.); +#48648 = FACE_BOUND('',#48649,.T.); +#48649 = EDGE_LOOP('',(#48650,#48651,#48652,#48653,#48661,#48670,#48678, + #48686,#48694,#48703,#48711,#48720)); +#48650 = ORIENTED_EDGE('',*,*,#46362,.F.); +#48651 = ORIENTED_EDGE('',*,*,#46340,.T.); +#48652 = ORIENTED_EDGE('',*,*,#48627,.T.); +#48653 = ORIENTED_EDGE('',*,*,#48654,.T.); +#48654 = EDGE_CURVE('',#48628,#48655,#48657,.T.); +#48655 = VERTEX_POINT('',#48656); +#48656 = CARTESIAN_POINT('',(-2.379496640897,0.84,0.2479055467)); +#48657 = LINE('',#48658,#48659); +#48658 = CARTESIAN_POINT('',(-2.298480775301,0.84,0.742364817767)); +#48659 = VECTOR('',#48660,1.); +#48660 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48661 = ORIENTED_EDGE('',*,*,#48662,.T.); +#48662 = EDGE_CURVE('',#48655,#48663,#48665,.T.); +#48663 = VERTEX_POINT('',#48664); +#48664 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.)); +#48665 = CIRCLE('',#48666,0.3); +#48666 = AXIS2_PLACEMENT_3D('',#48667,#48668,#48669); +#48667 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.3)); +#48668 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48669 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48670 = ORIENTED_EDGE('',*,*,#48671,.T.); +#48671 = EDGE_CURVE('',#48663,#48672,#48674,.T.); +#48672 = VERTEX_POINT('',#48673); +#48673 = CARTESIAN_POINT('',(-3.,0.84,0.)); +#48674 = LINE('',#48675,#48676); +#48675 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.)); +#48676 = VECTOR('',#48677,1.); +#48677 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48678 = ORIENTED_EDGE('',*,*,#48679,.T.); +#48679 = EDGE_CURVE('',#48672,#48680,#48682,.T.); +#48680 = VERTEX_POINT('',#48681); +#48681 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#48682 = LINE('',#48683,#48684); +#48683 = CARTESIAN_POINT('',(-3.,0.84,0.)); +#48684 = VECTOR('',#48685,1.); +#48685 = DIRECTION('',(0.,0.,1.)); +#48686 = ORIENTED_EDGE('',*,*,#48687,.T.); +#48687 = EDGE_CURVE('',#48680,#48688,#48690,.T.); +#48688 = VERTEX_POINT('',#48689); +#48689 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.2)); +#48690 = LINE('',#48691,#48692); +#48691 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#48692 = VECTOR('',#48693,1.); +#48693 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48694 = ORIENTED_EDGE('',*,*,#48695,.T.); +#48695 = EDGE_CURVE('',#48688,#48696,#48698,.T.); +#48696 = VERTEX_POINT('',#48697); +#48697 = CARTESIAN_POINT('',(-2.5764581915,0.84,0.282635182233)); +#48698 = CIRCLE('',#48699,0.1); +#48699 = AXIS2_PLACEMENT_3D('',#48700,#48701,#48702); +#48700 = CARTESIAN_POINT('',(-2.674938966801,0.84,0.3)); +#48701 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48702 = DIRECTION('',(0.,0.,-1.)); +#48703 = ORIENTED_EDGE('',*,*,#48704,.T.); +#48704 = EDGE_CURVE('',#48696,#48705,#48707,.T.); +#48705 = VERTEX_POINT('',#48706); +#48706 = CARTESIAN_POINT('',(-2.495442325904,0.84,0.7770944533)); +#48707 = LINE('',#48708,#48709); +#48708 = CARTESIAN_POINT('',(-2.5764581915,0.84,0.282635182233)); +#48709 = VECTOR('',#48710,1.); +#48710 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48711 = ORIENTED_EDGE('',*,*,#48712,.T.); +#48712 = EDGE_CURVE('',#48705,#48713,#48715,.T.); +#48713 = VERTEX_POINT('',#48714); +#48714 = CARTESIAN_POINT('',(-2.2,0.84,1.025)); +#48715 = CIRCLE('',#48716,0.3); +#48716 = AXIS2_PLACEMENT_3D('',#48717,#48718,#48719); +#48717 = CARTESIAN_POINT('',(-2.2,0.84,0.725)); +#48718 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48719 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48720 = ORIENTED_EDGE('',*,*,#48721,.T.); +#48721 = EDGE_CURVE('',#48713,#46363,#48722,.T.); +#48722 = LINE('',#48723,#48724); +#48723 = CARTESIAN_POINT('',(-2.2,0.84,1.025)); +#48724 = VECTOR('',#48725,1.); +#48725 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48726 = PLANE('',#48727); +#48727 = AXIS2_PLACEMENT_3D('',#48728,#48729,#48730); +#48728 = CARTESIAN_POINT('',(-2.410970442936,0.84,0.528115505988)); +#48729 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48730 = DIRECTION('',(0.,-0.,1.)); +#48731 = ADVANCED_FACE('',(#48732),#48748,.F.); +#48732 = FACE_BOUND('',#48733,.F.); +#48733 = EDGE_LOOP('',(#48734,#48735,#48741,#48742)); +#48734 = ORIENTED_EDGE('',*,*,#46379,.T.); +#48735 = ORIENTED_EDGE('',*,*,#48736,.T.); +#48736 = EDGE_CURVE('',#46372,#47268,#48737,.T.); +#48737 = LINE('',#48738,#48739); +#48738 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#48739 = VECTOR('',#48740,1.); +#48740 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48741 = ORIENTED_EDGE('',*,*,#47267,.F.); +#48742 = ORIENTED_EDGE('',*,*,#48743,.F.); +#48743 = EDGE_CURVE('',#46363,#47260,#48744,.T.); +#48744 = LINE('',#48745,#48746); +#48745 = CARTESIAN_POINT('',(-2.2,0.84,1.025)); +#48746 = VECTOR('',#48747,1.); +#48747 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48748 = PLANE('',#48749); +#48749 = AXIS2_PLACEMENT_3D('',#48750,#48751,#48752); +#48750 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48751 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48752 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48753 = ADVANCED_FACE('',(#48754),#48840,.F.); +#48754 = FACE_BOUND('',#48755,.F.); +#48755 = EDGE_LOOP('',(#48756,#48757,#48758,#48767,#48775,#48784,#48792, + #48800,#48808,#48817,#48825,#48834)); +#48756 = ORIENTED_EDGE('',*,*,#46371,.F.); +#48757 = ORIENTED_EDGE('',*,*,#46393,.T.); +#48758 = ORIENTED_EDGE('',*,*,#48759,.T.); +#48759 = EDGE_CURVE('',#46394,#48760,#48762,.T.); +#48760 = VERTEX_POINT('',#48761); +#48761 = CARTESIAN_POINT('',(-2.298480775301,1.7,0.742364817767)); +#48762 = CIRCLE('',#48763,0.1); +#48763 = AXIS2_PLACEMENT_3D('',#48764,#48765,#48766); +#48764 = CARTESIAN_POINT('',(-2.2,1.7,0.725)); +#48765 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48766 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48767 = ORIENTED_EDGE('',*,*,#48768,.T.); +#48768 = EDGE_CURVE('',#48760,#48769,#48771,.T.); +#48769 = VERTEX_POINT('',#48770); +#48770 = CARTESIAN_POINT('',(-2.379496640897,1.7,0.2479055467)); +#48771 = LINE('',#48772,#48773); +#48772 = CARTESIAN_POINT('',(-2.298480775301,1.7,0.742364817767)); +#48773 = VECTOR('',#48774,1.); +#48774 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48775 = ORIENTED_EDGE('',*,*,#48776,.T.); +#48776 = EDGE_CURVE('',#48769,#48777,#48779,.T.); +#48777 = VERTEX_POINT('',#48778); +#48778 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.)); +#48779 = CIRCLE('',#48780,0.3); +#48780 = AXIS2_PLACEMENT_3D('',#48781,#48782,#48783); +#48781 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.3)); +#48782 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48783 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48784 = ORIENTED_EDGE('',*,*,#48785,.T.); +#48785 = EDGE_CURVE('',#48777,#48786,#48788,.T.); +#48786 = VERTEX_POINT('',#48787); +#48787 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#48788 = LINE('',#48789,#48790); +#48789 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.)); +#48790 = VECTOR('',#48791,1.); +#48791 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48792 = ORIENTED_EDGE('',*,*,#48793,.T.); +#48793 = EDGE_CURVE('',#48786,#48794,#48796,.T.); +#48794 = VERTEX_POINT('',#48795); +#48795 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#48796 = LINE('',#48797,#48798); +#48797 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#48798 = VECTOR('',#48799,1.); +#48799 = DIRECTION('',(0.,0.,1.)); +#48800 = ORIENTED_EDGE('',*,*,#48801,.T.); +#48801 = EDGE_CURVE('',#48794,#48802,#48804,.T.); +#48802 = VERTEX_POINT('',#48803); +#48803 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.2)); +#48804 = LINE('',#48805,#48806); +#48805 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#48806 = VECTOR('',#48807,1.); +#48807 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48808 = ORIENTED_EDGE('',*,*,#48809,.T.); +#48809 = EDGE_CURVE('',#48802,#48810,#48812,.T.); +#48810 = VERTEX_POINT('',#48811); +#48811 = CARTESIAN_POINT('',(-2.5764581915,1.7,0.282635182233)); +#48812 = CIRCLE('',#48813,0.1); +#48813 = AXIS2_PLACEMENT_3D('',#48814,#48815,#48816); +#48814 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.3)); +#48815 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48816 = DIRECTION('',(0.,0.,-1.)); +#48817 = ORIENTED_EDGE('',*,*,#48818,.T.); +#48818 = EDGE_CURVE('',#48810,#48819,#48821,.T.); +#48819 = VERTEX_POINT('',#48820); +#48820 = CARTESIAN_POINT('',(-2.495442325904,1.7,0.7770944533)); +#48821 = LINE('',#48822,#48823); +#48822 = CARTESIAN_POINT('',(-2.5764581915,1.7,0.282635182233)); +#48823 = VECTOR('',#48824,1.); +#48824 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48825 = ORIENTED_EDGE('',*,*,#48826,.T.); +#48826 = EDGE_CURVE('',#48819,#48827,#48829,.T.); +#48827 = VERTEX_POINT('',#48828); +#48828 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#48829 = CIRCLE('',#48830,0.3); +#48830 = AXIS2_PLACEMENT_3D('',#48831,#48832,#48833); +#48831 = CARTESIAN_POINT('',(-2.2,1.7,0.725)); +#48832 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48833 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48834 = ORIENTED_EDGE('',*,*,#48835,.T.); +#48835 = EDGE_CURVE('',#48827,#46372,#48836,.T.); +#48836 = LINE('',#48837,#48838); +#48837 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#48838 = VECTOR('',#48839,1.); +#48839 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48840 = PLANE('',#48841); +#48841 = AXIS2_PLACEMENT_3D('',#48842,#48843,#48844); +#48842 = CARTESIAN_POINT('',(-2.410970442936,1.7,0.528115505988)); +#48843 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48844 = DIRECTION('',(0.,-0.,1.)); +#48845 = ADVANCED_FACE('',(#48846),#48865,.F.); +#48846 = FACE_BOUND('',#48847,.F.); +#48847 = EDGE_LOOP('',(#48848,#48849,#48858,#48864)); +#48848 = ORIENTED_EDGE('',*,*,#46410,.T.); +#48849 = ORIENTED_EDGE('',*,*,#48850,.T.); +#48850 = EDGE_CURVE('',#46403,#48851,#48853,.T.); +#48851 = VERTEX_POINT('',#48852); +#48852 = CARTESIAN_POINT('',(-2.298480775301,2.11,0.742364817767)); +#48853 = CIRCLE('',#48854,0.1); +#48854 = AXIS2_PLACEMENT_3D('',#48855,#48856,#48857); +#48855 = CARTESIAN_POINT('',(-2.2,2.11,0.725)); +#48856 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48857 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48858 = ORIENTED_EDGE('',*,*,#48859,.F.); +#48859 = EDGE_CURVE('',#48760,#48851,#48860,.T.); +#48860 = LINE('',#48861,#48862); +#48861 = CARTESIAN_POINT('',(-2.298480775301,1.7,0.742364817767)); +#48862 = VECTOR('',#48863,1.); +#48863 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48864 = ORIENTED_EDGE('',*,*,#48759,.F.); +#48865 = CYLINDRICAL_SURFACE('',#48866,0.1); +#48866 = AXIS2_PLACEMENT_3D('',#48867,#48868,#48869); +#48867 = CARTESIAN_POINT('',(-2.2,1.7,0.725)); +#48868 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#48869 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48870 = ADVANCED_FACE('',(#48871),#48949,.T.); +#48871 = FACE_BOUND('',#48872,.T.); +#48872 = EDGE_LOOP('',(#48873,#48874,#48875,#48876,#48884,#48893,#48901, + #48909,#48917,#48926,#48934,#48943)); +#48873 = ORIENTED_EDGE('',*,*,#46424,.F.); +#48874 = ORIENTED_EDGE('',*,*,#46402,.T.); +#48875 = ORIENTED_EDGE('',*,*,#48850,.T.); +#48876 = ORIENTED_EDGE('',*,*,#48877,.T.); +#48877 = EDGE_CURVE('',#48851,#48878,#48880,.T.); +#48878 = VERTEX_POINT('',#48879); +#48879 = CARTESIAN_POINT('',(-2.379496640897,2.11,0.2479055467)); +#48880 = LINE('',#48881,#48882); +#48881 = CARTESIAN_POINT('',(-2.298480775301,2.11,0.742364817767)); +#48882 = VECTOR('',#48883,1.); +#48883 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48884 = ORIENTED_EDGE('',*,*,#48885,.T.); +#48885 = EDGE_CURVE('',#48878,#48886,#48888,.T.); +#48886 = VERTEX_POINT('',#48887); +#48887 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.)); +#48888 = CIRCLE('',#48889,0.3); +#48889 = AXIS2_PLACEMENT_3D('',#48890,#48891,#48892); +#48890 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.3)); +#48891 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#48892 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#48893 = ORIENTED_EDGE('',*,*,#48894,.T.); +#48894 = EDGE_CURVE('',#48886,#48895,#48897,.T.); +#48895 = VERTEX_POINT('',#48896); +#48896 = CARTESIAN_POINT('',(-3.,2.11,0.)); +#48897 = LINE('',#48898,#48899); +#48898 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.)); +#48899 = VECTOR('',#48900,1.); +#48900 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#48901 = ORIENTED_EDGE('',*,*,#48902,.T.); +#48902 = EDGE_CURVE('',#48895,#48903,#48905,.T.); +#48903 = VERTEX_POINT('',#48904); +#48904 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#48905 = LINE('',#48906,#48907); +#48906 = CARTESIAN_POINT('',(-3.,2.11,0.)); +#48907 = VECTOR('',#48908,1.); +#48908 = DIRECTION('',(0.,0.,1.)); +#48909 = ORIENTED_EDGE('',*,*,#48910,.T.); +#48910 = EDGE_CURVE('',#48903,#48911,#48913,.T.); +#48911 = VERTEX_POINT('',#48912); +#48912 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.2)); +#48913 = LINE('',#48914,#48915); +#48914 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#48915 = VECTOR('',#48916,1.); +#48916 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48917 = ORIENTED_EDGE('',*,*,#48918,.T.); +#48918 = EDGE_CURVE('',#48911,#48919,#48921,.T.); +#48919 = VERTEX_POINT('',#48920); +#48920 = CARTESIAN_POINT('',(-2.5764581915,2.11,0.282635182233)); +#48921 = CIRCLE('',#48922,0.1); +#48922 = AXIS2_PLACEMENT_3D('',#48923,#48924,#48925); +#48923 = CARTESIAN_POINT('',(-2.674938966801,2.11,0.3)); +#48924 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#48925 = DIRECTION('',(0.,0.,-1.)); +#48926 = ORIENTED_EDGE('',*,*,#48927,.T.); +#48927 = EDGE_CURVE('',#48919,#48928,#48930,.T.); +#48928 = VERTEX_POINT('',#48929); +#48929 = CARTESIAN_POINT('',(-2.495442325904,2.11,0.7770944533)); +#48930 = LINE('',#48931,#48932); +#48931 = CARTESIAN_POINT('',(-2.5764581915,2.11,0.282635182233)); +#48932 = VECTOR('',#48933,1.); +#48933 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#48934 = ORIENTED_EDGE('',*,*,#48935,.T.); +#48935 = EDGE_CURVE('',#48928,#48936,#48938,.T.); +#48936 = VERTEX_POINT('',#48937); +#48937 = CARTESIAN_POINT('',(-2.2,2.11,1.025)); +#48938 = CIRCLE('',#48939,0.3); +#48939 = AXIS2_PLACEMENT_3D('',#48940,#48941,#48942); +#48940 = CARTESIAN_POINT('',(-2.2,2.11,0.725)); +#48941 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#48942 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#48943 = ORIENTED_EDGE('',*,*,#48944,.T.); +#48944 = EDGE_CURVE('',#48936,#46425,#48945,.T.); +#48945 = LINE('',#48946,#48947); +#48946 = CARTESIAN_POINT('',(-2.2,2.11,1.025)); +#48947 = VECTOR('',#48948,1.); +#48948 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48949 = PLANE('',#48950); +#48950 = AXIS2_PLACEMENT_3D('',#48951,#48952,#48953); +#48951 = CARTESIAN_POINT('',(-2.410970442936,2.11,0.528115505988)); +#48952 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#48953 = DIRECTION('',(0.,-0.,1.)); +#48954 = ADVANCED_FACE('',(#48955),#48971,.F.); +#48955 = FACE_BOUND('',#48956,.F.); +#48956 = EDGE_LOOP('',(#48957,#48958,#48964,#48965)); +#48957 = ORIENTED_EDGE('',*,*,#46441,.T.); +#48958 = ORIENTED_EDGE('',*,*,#48959,.T.); +#48959 = EDGE_CURVE('',#46434,#47284,#48960,.T.); +#48960 = LINE('',#48961,#48962); +#48961 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#48962 = VECTOR('',#48963,1.); +#48963 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48964 = ORIENTED_EDGE('',*,*,#47283,.F.); +#48965 = ORIENTED_EDGE('',*,*,#48966,.F.); +#48966 = EDGE_CURVE('',#46425,#47276,#48967,.T.); +#48967 = LINE('',#48968,#48969); +#48968 = CARTESIAN_POINT('',(-2.2,2.11,1.025)); +#48969 = VECTOR('',#48970,1.); +#48970 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#48971 = PLANE('',#48972); +#48972 = AXIS2_PLACEMENT_3D('',#48973,#48974,#48975); +#48973 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#48974 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#48975 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#48976 = ADVANCED_FACE('',(#48977),#49063,.F.); +#48977 = FACE_BOUND('',#48978,.F.); +#48978 = EDGE_LOOP('',(#48979,#48980,#48981,#48990,#48998,#49007,#49015, + #49023,#49031,#49040,#49048,#49057)); +#48979 = ORIENTED_EDGE('',*,*,#46433,.F.); +#48980 = ORIENTED_EDGE('',*,*,#46455,.T.); +#48981 = ORIENTED_EDGE('',*,*,#48982,.T.); +#48982 = EDGE_CURVE('',#46456,#48983,#48985,.T.); +#48983 = VERTEX_POINT('',#48984); +#48984 = CARTESIAN_POINT('',(-2.298480775301,2.97,0.742364817767)); +#48985 = CIRCLE('',#48986,0.1); +#48986 = AXIS2_PLACEMENT_3D('',#48987,#48988,#48989); +#48987 = CARTESIAN_POINT('',(-2.2,2.97,0.725)); +#48988 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#48989 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#48990 = ORIENTED_EDGE('',*,*,#48991,.T.); +#48991 = EDGE_CURVE('',#48983,#48992,#48994,.T.); +#48992 = VERTEX_POINT('',#48993); +#48993 = CARTESIAN_POINT('',(-2.379496640897,2.97,0.2479055467)); +#48994 = LINE('',#48995,#48996); +#48995 = CARTESIAN_POINT('',(-2.298480775301,2.97,0.742364817767)); +#48996 = VECTOR('',#48997,1.); +#48997 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#48998 = ORIENTED_EDGE('',*,*,#48999,.T.); +#48999 = EDGE_CURVE('',#48992,#49000,#49002,.T.); +#49000 = VERTEX_POINT('',#49001); +#49001 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.)); +#49002 = CIRCLE('',#49003,0.3); +#49003 = AXIS2_PLACEMENT_3D('',#49004,#49005,#49006); +#49004 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.3)); +#49005 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#49006 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#49007 = ORIENTED_EDGE('',*,*,#49008,.T.); +#49008 = EDGE_CURVE('',#49000,#49009,#49011,.T.); +#49009 = VERTEX_POINT('',#49010); +#49010 = CARTESIAN_POINT('',(-3.,2.97,0.)); +#49011 = LINE('',#49012,#49013); +#49012 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.)); +#49013 = VECTOR('',#49014,1.); +#49014 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#49015 = ORIENTED_EDGE('',*,*,#49016,.T.); +#49016 = EDGE_CURVE('',#49009,#49017,#49019,.T.); +#49017 = VERTEX_POINT('',#49018); +#49018 = CARTESIAN_POINT('',(-3.,2.97,0.2)); +#49019 = LINE('',#49020,#49021); +#49020 = CARTESIAN_POINT('',(-3.,2.97,0.)); +#49021 = VECTOR('',#49022,1.); +#49022 = DIRECTION('',(0.,0.,1.)); +#49023 = ORIENTED_EDGE('',*,*,#49024,.T.); +#49024 = EDGE_CURVE('',#49017,#49025,#49027,.T.); +#49025 = VERTEX_POINT('',#49026); +#49026 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.2)); +#49027 = LINE('',#49028,#49029); +#49028 = CARTESIAN_POINT('',(-3.,2.97,0.2)); +#49029 = VECTOR('',#49030,1.); +#49030 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49031 = ORIENTED_EDGE('',*,*,#49032,.T.); +#49032 = EDGE_CURVE('',#49025,#49033,#49035,.T.); +#49033 = VERTEX_POINT('',#49034); +#49034 = CARTESIAN_POINT('',(-2.5764581915,2.97,0.282635182233)); +#49035 = CIRCLE('',#49036,0.1); +#49036 = AXIS2_PLACEMENT_3D('',#49037,#49038,#49039); +#49037 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.3)); +#49038 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#49039 = DIRECTION('',(0.,0.,-1.)); +#49040 = ORIENTED_EDGE('',*,*,#49041,.T.); +#49041 = EDGE_CURVE('',#49033,#49042,#49044,.T.); +#49042 = VERTEX_POINT('',#49043); +#49043 = CARTESIAN_POINT('',(-2.495442325904,2.97,0.7770944533)); +#49044 = LINE('',#49045,#49046); +#49045 = CARTESIAN_POINT('',(-2.5764581915,2.97,0.282635182233)); +#49046 = VECTOR('',#49047,1.); +#49047 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#49048 = ORIENTED_EDGE('',*,*,#49049,.T.); +#49049 = EDGE_CURVE('',#49042,#49050,#49052,.T.); +#49050 = VERTEX_POINT('',#49051); +#49051 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#49052 = CIRCLE('',#49053,0.3); +#49053 = AXIS2_PLACEMENT_3D('',#49054,#49055,#49056); +#49054 = CARTESIAN_POINT('',(-2.2,2.97,0.725)); +#49055 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#49056 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#49057 = ORIENTED_EDGE('',*,*,#49058,.T.); +#49058 = EDGE_CURVE('',#49050,#46434,#49059,.T.); +#49059 = LINE('',#49060,#49061); +#49060 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#49061 = VECTOR('',#49062,1.); +#49062 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49063 = PLANE('',#49064); +#49064 = AXIS2_PLACEMENT_3D('',#49065,#49066,#49067); +#49065 = CARTESIAN_POINT('',(-2.410970442936,2.97,0.528115505988)); +#49066 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49067 = DIRECTION('',(0.,-0.,1.)); +#49068 = ADVANCED_FACE('',(#49069),#49088,.F.); +#49069 = FACE_BOUND('',#49070,.F.); +#49070 = EDGE_LOOP('',(#49071,#49072,#49081,#49087)); +#49071 = ORIENTED_EDGE('',*,*,#46472,.T.); +#49072 = ORIENTED_EDGE('',*,*,#49073,.T.); +#49073 = EDGE_CURVE('',#46465,#49074,#49076,.T.); +#49074 = VERTEX_POINT('',#49075); +#49075 = CARTESIAN_POINT('',(-2.298480775301,3.38,0.742364817767)); +#49076 = CIRCLE('',#49077,0.1); +#49077 = AXIS2_PLACEMENT_3D('',#49078,#49079,#49080); +#49078 = CARTESIAN_POINT('',(-2.2,3.38,0.725)); +#49079 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#49080 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#49081 = ORIENTED_EDGE('',*,*,#49082,.F.); +#49082 = EDGE_CURVE('',#48983,#49074,#49083,.T.); +#49083 = LINE('',#49084,#49085); +#49084 = CARTESIAN_POINT('',(-2.298480775301,2.97,0.742364817767)); +#49085 = VECTOR('',#49086,1.); +#49086 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49087 = ORIENTED_EDGE('',*,*,#48982,.F.); +#49088 = CYLINDRICAL_SURFACE('',#49089,0.1); +#49089 = AXIS2_PLACEMENT_3D('',#49090,#49091,#49092); +#49090 = CARTESIAN_POINT('',(-2.2,2.97,0.725)); +#49091 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#49092 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#49093 = ADVANCED_FACE('',(#49094),#49172,.T.); +#49094 = FACE_BOUND('',#49095,.T.); +#49095 = EDGE_LOOP('',(#49096,#49097,#49098,#49099,#49107,#49116,#49124, + #49132,#49140,#49149,#49157,#49166)); +#49096 = ORIENTED_EDGE('',*,*,#46486,.F.); +#49097 = ORIENTED_EDGE('',*,*,#46464,.T.); +#49098 = ORIENTED_EDGE('',*,*,#49073,.T.); +#49099 = ORIENTED_EDGE('',*,*,#49100,.T.); +#49100 = EDGE_CURVE('',#49074,#49101,#49103,.T.); +#49101 = VERTEX_POINT('',#49102); +#49102 = CARTESIAN_POINT('',(-2.379496640897,3.38,0.2479055467)); +#49103 = LINE('',#49104,#49105); +#49104 = CARTESIAN_POINT('',(-2.298480775301,3.38,0.742364817767)); +#49105 = VECTOR('',#49106,1.); +#49106 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#49107 = ORIENTED_EDGE('',*,*,#49108,.T.); +#49108 = EDGE_CURVE('',#49101,#49109,#49111,.T.); +#49109 = VERTEX_POINT('',#49110); +#49110 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.)); +#49111 = CIRCLE('',#49112,0.3); +#49112 = AXIS2_PLACEMENT_3D('',#49113,#49114,#49115); +#49113 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.3)); +#49114 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#49115 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#49116 = ORIENTED_EDGE('',*,*,#49117,.T.); +#49117 = EDGE_CURVE('',#49109,#49118,#49120,.T.); +#49118 = VERTEX_POINT('',#49119); +#49119 = CARTESIAN_POINT('',(-3.,3.38,0.)); +#49120 = LINE('',#49121,#49122); +#49121 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.)); +#49122 = VECTOR('',#49123,1.); +#49123 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#49124 = ORIENTED_EDGE('',*,*,#49125,.T.); +#49125 = EDGE_CURVE('',#49118,#49126,#49128,.T.); +#49126 = VERTEX_POINT('',#49127); +#49127 = CARTESIAN_POINT('',(-3.,3.38,0.2)); +#49128 = LINE('',#49129,#49130); +#49129 = CARTESIAN_POINT('',(-3.,3.38,0.)); +#49130 = VECTOR('',#49131,1.); +#49131 = DIRECTION('',(0.,0.,1.)); +#49132 = ORIENTED_EDGE('',*,*,#49133,.T.); +#49133 = EDGE_CURVE('',#49126,#49134,#49136,.T.); +#49134 = VERTEX_POINT('',#49135); +#49135 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.2)); +#49136 = LINE('',#49137,#49138); +#49137 = CARTESIAN_POINT('',(-3.,3.38,0.2)); +#49138 = VECTOR('',#49139,1.); +#49139 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49140 = ORIENTED_EDGE('',*,*,#49141,.T.); +#49141 = EDGE_CURVE('',#49134,#49142,#49144,.T.); +#49142 = VERTEX_POINT('',#49143); +#49143 = CARTESIAN_POINT('',(-2.5764581915,3.38,0.282635182233)); +#49144 = CIRCLE('',#49145,0.1); +#49145 = AXIS2_PLACEMENT_3D('',#49146,#49147,#49148); +#49146 = CARTESIAN_POINT('',(-2.674938966801,3.38,0.3)); +#49147 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#49148 = DIRECTION('',(0.,0.,-1.)); +#49149 = ORIENTED_EDGE('',*,*,#49150,.T.); +#49150 = EDGE_CURVE('',#49142,#49151,#49153,.T.); +#49151 = VERTEX_POINT('',#49152); +#49152 = CARTESIAN_POINT('',(-2.495442325904,3.38,0.7770944533)); +#49153 = LINE('',#49154,#49155); +#49154 = CARTESIAN_POINT('',(-2.5764581915,3.38,0.282635182233)); +#49155 = VECTOR('',#49156,1.); +#49156 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#49157 = ORIENTED_EDGE('',*,*,#49158,.T.); +#49158 = EDGE_CURVE('',#49151,#49159,#49161,.T.); +#49159 = VERTEX_POINT('',#49160); +#49160 = CARTESIAN_POINT('',(-2.2,3.38,1.025)); +#49161 = CIRCLE('',#49162,0.3); +#49162 = AXIS2_PLACEMENT_3D('',#49163,#49164,#49165); +#49163 = CARTESIAN_POINT('',(-2.2,3.38,0.725)); +#49164 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#49165 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#49166 = ORIENTED_EDGE('',*,*,#49167,.T.); +#49167 = EDGE_CURVE('',#49159,#46487,#49168,.T.); +#49168 = LINE('',#49169,#49170); +#49169 = CARTESIAN_POINT('',(-2.2,3.38,1.025)); +#49170 = VECTOR('',#49171,1.); +#49171 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49172 = PLANE('',#49173); +#49173 = AXIS2_PLACEMENT_3D('',#49174,#49175,#49176); +#49174 = CARTESIAN_POINT('',(-2.410970442936,3.38,0.528115505988)); +#49175 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49176 = DIRECTION('',(0.,-0.,1.)); +#49177 = ADVANCED_FACE('',(#49178),#49189,.F.); +#49178 = FACE_BOUND('',#49179,.F.); +#49179 = EDGE_LOOP('',(#49180,#49181,#49182,#49183)); +#49180 = ORIENTED_EDGE('',*,*,#46503,.T.); +#49181 = ORIENTED_EDGE('',*,*,#47171,.T.); +#49182 = ORIENTED_EDGE('',*,*,#47299,.F.); +#49183 = ORIENTED_EDGE('',*,*,#49184,.F.); +#49184 = EDGE_CURVE('',#46487,#47292,#49185,.T.); +#49185 = LINE('',#49186,#49187); +#49186 = CARTESIAN_POINT('',(-2.2,3.38,1.025)); +#49187 = VECTOR('',#49188,1.); +#49188 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49189 = PLANE('',#49190); +#49190 = AXIS2_PLACEMENT_3D('',#49191,#49192,#49193); +#49191 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#49192 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#49193 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#49194 = ADVANCED_FACE('',(#49195),#49274,.F.); +#49195 = FACE_BOUND('',#49196,.F.); +#49196 = EDGE_LOOP('',(#49197,#49198,#49199,#49208,#49216,#49225,#49233, + #49241,#49249,#49258,#49266,#49273)); +#49197 = ORIENTED_EDGE('',*,*,#46495,.F.); +#49198 = ORIENTED_EDGE('',*,*,#46517,.T.); +#49199 = ORIENTED_EDGE('',*,*,#49200,.T.); +#49200 = EDGE_CURVE('',#46518,#49201,#49203,.T.); +#49201 = VERTEX_POINT('',#49202); +#49202 = CARTESIAN_POINT('',(-2.298480775301,4.24,0.742364817767)); +#49203 = CIRCLE('',#49204,0.1); +#49204 = AXIS2_PLACEMENT_3D('',#49205,#49206,#49207); +#49205 = CARTESIAN_POINT('',(-2.2,4.24,0.725)); +#49206 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#49207 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#49208 = ORIENTED_EDGE('',*,*,#49209,.T.); +#49209 = EDGE_CURVE('',#49201,#49210,#49212,.T.); +#49210 = VERTEX_POINT('',#49211); +#49211 = CARTESIAN_POINT('',(-2.379496640897,4.24,0.2479055467)); +#49212 = LINE('',#49213,#49214); +#49213 = CARTESIAN_POINT('',(-2.298480775301,4.24,0.742364817767)); +#49214 = VECTOR('',#49215,1.); +#49215 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#49216 = ORIENTED_EDGE('',*,*,#49217,.T.); +#49217 = EDGE_CURVE('',#49210,#49218,#49220,.T.); +#49218 = VERTEX_POINT('',#49219); +#49219 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.)); +#49220 = CIRCLE('',#49221,0.3); +#49221 = AXIS2_PLACEMENT_3D('',#49222,#49223,#49224); +#49222 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.3)); +#49223 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#49224 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#49225 = ORIENTED_EDGE('',*,*,#49226,.T.); +#49226 = EDGE_CURVE('',#49218,#49227,#49229,.T.); +#49227 = VERTEX_POINT('',#49228); +#49228 = CARTESIAN_POINT('',(-3.,4.24,0.)); +#49229 = LINE('',#49230,#49231); +#49230 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.)); +#49231 = VECTOR('',#49232,1.); +#49232 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#49233 = ORIENTED_EDGE('',*,*,#49234,.T.); +#49234 = EDGE_CURVE('',#49227,#49235,#49237,.T.); +#49235 = VERTEX_POINT('',#49236); +#49236 = CARTESIAN_POINT('',(-3.,4.24,0.2)); +#49237 = LINE('',#49238,#49239); +#49238 = CARTESIAN_POINT('',(-3.,4.24,0.)); +#49239 = VECTOR('',#49240,1.); +#49240 = DIRECTION('',(0.,0.,1.)); +#49241 = ORIENTED_EDGE('',*,*,#49242,.T.); +#49242 = EDGE_CURVE('',#49235,#49243,#49245,.T.); +#49243 = VERTEX_POINT('',#49244); +#49244 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.2)); +#49245 = LINE('',#49246,#49247); +#49246 = CARTESIAN_POINT('',(-3.,4.24,0.2)); +#49247 = VECTOR('',#49248,1.); +#49248 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49249 = ORIENTED_EDGE('',*,*,#49250,.T.); +#49250 = EDGE_CURVE('',#49243,#49251,#49253,.T.); +#49251 = VERTEX_POINT('',#49252); +#49252 = CARTESIAN_POINT('',(-2.5764581915,4.24,0.282635182233)); +#49253 = CIRCLE('',#49254,0.1); +#49254 = AXIS2_PLACEMENT_3D('',#49255,#49256,#49257); +#49255 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.3)); +#49256 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#49257 = DIRECTION('',(0.,0.,-1.)); +#49258 = ORIENTED_EDGE('',*,*,#49259,.T.); +#49259 = EDGE_CURVE('',#49251,#49260,#49262,.T.); +#49260 = VERTEX_POINT('',#49261); +#49261 = CARTESIAN_POINT('',(-2.495442325904,4.24,0.7770944533)); +#49262 = LINE('',#49263,#49264); +#49263 = CARTESIAN_POINT('',(-2.5764581915,4.24,0.282635182233)); +#49264 = VECTOR('',#49265,1.); +#49265 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#49266 = ORIENTED_EDGE('',*,*,#49267,.T.); +#49267 = EDGE_CURVE('',#49260,#47141,#49268,.T.); +#49268 = CIRCLE('',#49269,0.3); +#49269 = AXIS2_PLACEMENT_3D('',#49270,#49271,#49272); +#49270 = CARTESIAN_POINT('',(-2.2,4.24,0.725)); +#49271 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#49272 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#49273 = ORIENTED_EDGE('',*,*,#47140,.T.); +#49274 = PLANE('',#49275); +#49275 = AXIS2_PLACEMENT_3D('',#49276,#49277,#49278); +#49276 = CARTESIAN_POINT('',(-2.410970442936,4.24,0.528115505988)); +#49277 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49278 = DIRECTION('',(0.,-0.,1.)); +#49279 = ADVANCED_FACE('',(#49280),#49299,.F.); +#49280 = FACE_BOUND('',#49281,.F.); +#49281 = EDGE_LOOP('',(#49282,#49283,#49292,#49298)); +#49282 = ORIENTED_EDGE('',*,*,#46534,.T.); +#49283 = ORIENTED_EDGE('',*,*,#49284,.T.); +#49284 = EDGE_CURVE('',#46527,#49285,#49287,.T.); +#49285 = VERTEX_POINT('',#49286); +#49286 = CARTESIAN_POINT('',(-2.298480775301,4.65,0.742364817767)); +#49287 = CIRCLE('',#49288,0.1); +#49288 = AXIS2_PLACEMENT_3D('',#49289,#49290,#49291); +#49289 = CARTESIAN_POINT('',(-2.2,4.65,0.725)); +#49290 = DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47)); +#49291 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#49292 = ORIENTED_EDGE('',*,*,#49293,.F.); +#49293 = EDGE_CURVE('',#49201,#49285,#49294,.T.); +#49294 = LINE('',#49295,#49296); +#49295 = CARTESIAN_POINT('',(-2.298480775301,4.24,0.742364817767)); +#49296 = VECTOR('',#49297,1.); +#49297 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49298 = ORIENTED_EDGE('',*,*,#49200,.F.); +#49299 = CYLINDRICAL_SURFACE('',#49300,0.1); +#49300 = AXIS2_PLACEMENT_3D('',#49301,#49302,#49303); +#49301 = CARTESIAN_POINT('',(-2.2,4.24,0.725)); +#49302 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#49303 = DIRECTION('',(-4.440892098501E-15,5.081436361563E-32,1.)); +#49304 = ADVANCED_FACE('',(#49305),#49376,.T.); +#49305 = FACE_BOUND('',#49306,.T.); +#49306 = EDGE_LOOP('',(#49307,#49308,#49309,#49310,#49318,#49327,#49335, + #49343,#49351,#49360,#49368,#49375)); +#49307 = ORIENTED_EDGE('',*,*,#46548,.F.); +#49308 = ORIENTED_EDGE('',*,*,#46526,.T.); +#49309 = ORIENTED_EDGE('',*,*,#49284,.T.); +#49310 = ORIENTED_EDGE('',*,*,#49311,.T.); +#49311 = EDGE_CURVE('',#49285,#49312,#49314,.T.); +#49312 = VERTEX_POINT('',#49313); +#49313 = CARTESIAN_POINT('',(-2.379496640897,4.65,0.2479055467)); +#49314 = LINE('',#49315,#49316); +#49315 = CARTESIAN_POINT('',(-2.298480775301,4.65,0.742364817767)); +#49316 = VECTOR('',#49317,1.); +#49317 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#49318 = ORIENTED_EDGE('',*,*,#49319,.T.); +#49319 = EDGE_CURVE('',#49312,#49320,#49322,.T.); +#49320 = VERTEX_POINT('',#49321); +#49321 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.)); +#49322 = CIRCLE('',#49323,0.3); +#49323 = AXIS2_PLACEMENT_3D('',#49324,#49325,#49326); +#49324 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.3)); +#49325 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#49326 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#49327 = ORIENTED_EDGE('',*,*,#49328,.T.); +#49328 = EDGE_CURVE('',#49320,#49329,#49331,.T.); +#49329 = VERTEX_POINT('',#49330); +#49330 = CARTESIAN_POINT('',(-3.,4.65,0.)); +#49331 = LINE('',#49332,#49333); +#49332 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.)); +#49333 = VECTOR('',#49334,1.); +#49334 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#49335 = ORIENTED_EDGE('',*,*,#49336,.T.); +#49336 = EDGE_CURVE('',#49329,#49337,#49339,.T.); +#49337 = VERTEX_POINT('',#49338); +#49338 = CARTESIAN_POINT('',(-3.,4.65,0.2)); +#49339 = LINE('',#49340,#49341); +#49340 = CARTESIAN_POINT('',(-3.,4.65,0.)); +#49341 = VECTOR('',#49342,1.); +#49342 = DIRECTION('',(0.,0.,1.)); +#49343 = ORIENTED_EDGE('',*,*,#49344,.T.); +#49344 = EDGE_CURVE('',#49337,#49345,#49347,.T.); +#49345 = VERTEX_POINT('',#49346); +#49346 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.2)); +#49347 = LINE('',#49348,#49349); +#49348 = CARTESIAN_POINT('',(-3.,4.65,0.2)); +#49349 = VECTOR('',#49350,1.); +#49350 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#49351 = ORIENTED_EDGE('',*,*,#49352,.T.); +#49352 = EDGE_CURVE('',#49345,#49353,#49355,.T.); +#49353 = VERTEX_POINT('',#49354); +#49354 = CARTESIAN_POINT('',(-2.5764581915,4.65,0.282635182233)); +#49355 = CIRCLE('',#49356,0.1); +#49356 = AXIS2_PLACEMENT_3D('',#49357,#49358,#49359); +#49357 = CARTESIAN_POINT('',(-2.674938966801,4.65,0.3)); +#49358 = DIRECTION('',(-1.144237745222E-17,-1.,-0.)); +#49359 = DIRECTION('',(0.,0.,-1.)); +#49360 = ORIENTED_EDGE('',*,*,#49361,.T.); +#49361 = EDGE_CURVE('',#49353,#49362,#49364,.T.); +#49362 = VERTEX_POINT('',#49363); +#49363 = CARTESIAN_POINT('',(-2.495442325904,4.65,0.7770944533)); +#49364 = LINE('',#49365,#49366); +#49365 = CARTESIAN_POINT('',(-2.5764581915,4.65,0.282635182233)); +#49366 = VECTOR('',#49367,1.); +#49367 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#49368 = ORIENTED_EDGE('',*,*,#49369,.T.); +#49369 = EDGE_CURVE('',#49362,#47149,#49370,.T.); +#49370 = CIRCLE('',#49371,0.3); +#49371 = AXIS2_PLACEMENT_3D('',#49372,#49373,#49374); +#49372 = CARTESIAN_POINT('',(-2.2,4.65,0.725)); +#49373 = DIRECTION('',(1.144237745222E-17,1.,3.08148791102E-33)); +#49374 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#49375 = ORIENTED_EDGE('',*,*,#47156,.T.); +#49376 = PLANE('',#49377); +#49377 = AXIS2_PLACEMENT_3D('',#49378,#49379,#49380); +#49378 = CARTESIAN_POINT('',(-2.410970442936,4.65,0.528115505988)); +#49379 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#49380 = DIRECTION('',(0.,-0.,1.)); +#49381 = ADVANCED_FACE('',(#49382),#49461,.F.); +#49382 = FACE_BOUND('',#49383,.F.); +#49383 = EDGE_LOOP('',(#49384,#49385,#49386,#49395,#49403,#49412,#49420, + #49428,#49436,#49445,#49453,#49460)); +#49384 = ORIENTED_EDGE('',*,*,#46567,.F.); +#49385 = ORIENTED_EDGE('',*,*,#46582,.T.); +#49386 = ORIENTED_EDGE('',*,*,#49387,.T.); +#49387 = EDGE_CURVE('',#46583,#49388,#49390,.T.); +#49388 = VERTEX_POINT('',#49389); +#49389 = CARTESIAN_POINT('',(2.298480775301,4.65,0.742364817767)); +#49390 = CIRCLE('',#49391,0.1); +#49391 = AXIS2_PLACEMENT_3D('',#49392,#49393,#49394); +#49392 = CARTESIAN_POINT('',(2.2,4.65,0.725)); +#49393 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49394 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49395 = ORIENTED_EDGE('',*,*,#49396,.T.); +#49396 = EDGE_CURVE('',#49388,#49397,#49399,.T.); +#49397 = VERTEX_POINT('',#49398); +#49398 = CARTESIAN_POINT('',(2.379496640897,4.65,0.2479055467)); +#49399 = LINE('',#49400,#49401); +#49400 = CARTESIAN_POINT('',(2.298480775301,4.65,0.742364817767)); +#49401 = VECTOR('',#49402,1.); +#49402 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49403 = ORIENTED_EDGE('',*,*,#49404,.T.); +#49404 = EDGE_CURVE('',#49397,#49405,#49407,.T.); +#49405 = VERTEX_POINT('',#49406); +#49406 = CARTESIAN_POINT('',(2.674938966801,4.65,0.)); +#49407 = CIRCLE('',#49408,0.3); +#49408 = AXIS2_PLACEMENT_3D('',#49409,#49410,#49411); +#49409 = CARTESIAN_POINT('',(2.674938966801,4.65,0.3)); +#49410 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49411 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49412 = ORIENTED_EDGE('',*,*,#49413,.T.); +#49413 = EDGE_CURVE('',#49405,#49414,#49416,.T.); +#49414 = VERTEX_POINT('',#49415); +#49415 = CARTESIAN_POINT('',(3.,4.65,0.)); +#49416 = LINE('',#49417,#49418); +#49417 = CARTESIAN_POINT('',(2.674938966801,4.65,0.)); +#49418 = VECTOR('',#49419,1.); +#49419 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49420 = ORIENTED_EDGE('',*,*,#49421,.T.); +#49421 = EDGE_CURVE('',#49414,#49422,#49424,.T.); +#49422 = VERTEX_POINT('',#49423); +#49423 = CARTESIAN_POINT('',(3.,4.65,0.2)); +#49424 = LINE('',#49425,#49426); +#49425 = CARTESIAN_POINT('',(3.,4.65,0.)); +#49426 = VECTOR('',#49427,1.); +#49427 = DIRECTION('',(0.,0.,1.)); +#49428 = ORIENTED_EDGE('',*,*,#49429,.T.); +#49429 = EDGE_CURVE('',#49422,#49430,#49432,.T.); +#49430 = VERTEX_POINT('',#49431); +#49431 = CARTESIAN_POINT('',(2.674938966801,4.65,0.2)); +#49432 = LINE('',#49433,#49434); +#49433 = CARTESIAN_POINT('',(3.,4.65,0.2)); +#49434 = VECTOR('',#49435,1.); +#49435 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49436 = ORIENTED_EDGE('',*,*,#49437,.T.); +#49437 = EDGE_CURVE('',#49430,#49438,#49440,.T.); +#49438 = VERTEX_POINT('',#49439); +#49439 = CARTESIAN_POINT('',(2.5764581915,4.65,0.282635182233)); +#49440 = CIRCLE('',#49441,0.1); +#49441 = AXIS2_PLACEMENT_3D('',#49442,#49443,#49444); +#49442 = CARTESIAN_POINT('',(2.674938966801,4.65,0.3)); +#49443 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49444 = DIRECTION('',(0.,0.,-1.)); +#49445 = ORIENTED_EDGE('',*,*,#49446,.T.); +#49446 = EDGE_CURVE('',#49438,#49447,#49449,.T.); +#49447 = VERTEX_POINT('',#49448); +#49448 = CARTESIAN_POINT('',(2.495442325904,4.65,0.7770944533)); +#49449 = LINE('',#49450,#49451); +#49450 = CARTESIAN_POINT('',(2.5764581915,4.65,0.282635182233)); +#49451 = VECTOR('',#49452,1.); +#49452 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49453 = ORIENTED_EDGE('',*,*,#49454,.T.); +#49454 = EDGE_CURVE('',#49447,#47556,#49455,.T.); +#49455 = CIRCLE('',#49456,0.3); +#49456 = AXIS2_PLACEMENT_3D('',#49457,#49458,#49459); +#49457 = CARTESIAN_POINT('',(2.2,4.65,0.725)); +#49458 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49459 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49460 = ORIENTED_EDGE('',*,*,#47555,.T.); +#49461 = PLANE('',#49462); +#49462 = AXIS2_PLACEMENT_3D('',#49463,#49464,#49465); +#49463 = CARTESIAN_POINT('',(2.410970442936,4.65,0.528115505988)); +#49464 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49465 = DIRECTION('',(0.,0.,1.)); +#49466 = ADVANCED_FACE('',(#49467),#49486,.F.); +#49467 = FACE_BOUND('',#49468,.F.); +#49468 = EDGE_LOOP('',(#49469,#49470,#49479,#49485)); +#49469 = ORIENTED_EDGE('',*,*,#46599,.T.); +#49470 = ORIENTED_EDGE('',*,*,#49471,.T.); +#49471 = EDGE_CURVE('',#46592,#49472,#49474,.T.); +#49472 = VERTEX_POINT('',#49473); +#49473 = CARTESIAN_POINT('',(2.298480775301,4.24,0.742364817767)); +#49474 = CIRCLE('',#49475,0.1); +#49475 = AXIS2_PLACEMENT_3D('',#49476,#49477,#49478); +#49476 = CARTESIAN_POINT('',(2.2,4.24,0.725)); +#49477 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49478 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49479 = ORIENTED_EDGE('',*,*,#49480,.F.); +#49480 = EDGE_CURVE('',#49388,#49472,#49481,.T.); +#49481 = LINE('',#49482,#49483); +#49482 = CARTESIAN_POINT('',(2.298480775301,4.65,0.742364817767)); +#49483 = VECTOR('',#49484,1.); +#49484 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49485 = ORIENTED_EDGE('',*,*,#49387,.F.); +#49486 = CYLINDRICAL_SURFACE('',#49487,0.1); +#49487 = AXIS2_PLACEMENT_3D('',#49488,#49489,#49490); +#49488 = CARTESIAN_POINT('',(2.2,4.65,0.725)); +#49489 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49490 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49491 = ADVANCED_FACE('',(#49492),#49563,.T.); +#49492 = FACE_BOUND('',#49493,.T.); +#49493 = EDGE_LOOP('',(#49494,#49495,#49496,#49497,#49505,#49514,#49522, + #49530,#49538,#49547,#49555,#49562)); +#49494 = ORIENTED_EDGE('',*,*,#46613,.F.); +#49495 = ORIENTED_EDGE('',*,*,#46591,.T.); +#49496 = ORIENTED_EDGE('',*,*,#49471,.T.); +#49497 = ORIENTED_EDGE('',*,*,#49498,.T.); +#49498 = EDGE_CURVE('',#49472,#49499,#49501,.T.); +#49499 = VERTEX_POINT('',#49500); +#49500 = CARTESIAN_POINT('',(2.379496640897,4.24,0.2479055467)); +#49501 = LINE('',#49502,#49503); +#49502 = CARTESIAN_POINT('',(2.298480775301,4.24,0.742364817767)); +#49503 = VECTOR('',#49504,1.); +#49504 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49505 = ORIENTED_EDGE('',*,*,#49506,.T.); +#49506 = EDGE_CURVE('',#49499,#49507,#49509,.T.); +#49507 = VERTEX_POINT('',#49508); +#49508 = CARTESIAN_POINT('',(2.674938966801,4.24,0.)); +#49509 = CIRCLE('',#49510,0.3); +#49510 = AXIS2_PLACEMENT_3D('',#49511,#49512,#49513); +#49511 = CARTESIAN_POINT('',(2.674938966801,4.24,0.3)); +#49512 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49513 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49514 = ORIENTED_EDGE('',*,*,#49515,.T.); +#49515 = EDGE_CURVE('',#49507,#49516,#49518,.T.); +#49516 = VERTEX_POINT('',#49517); +#49517 = CARTESIAN_POINT('',(3.,4.24,0.)); +#49518 = LINE('',#49519,#49520); +#49519 = CARTESIAN_POINT('',(2.674938966801,4.24,0.)); +#49520 = VECTOR('',#49521,1.); +#49521 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49522 = ORIENTED_EDGE('',*,*,#49523,.T.); +#49523 = EDGE_CURVE('',#49516,#49524,#49526,.T.); +#49524 = VERTEX_POINT('',#49525); +#49525 = CARTESIAN_POINT('',(3.,4.24,0.2)); +#49526 = LINE('',#49527,#49528); +#49527 = CARTESIAN_POINT('',(3.,4.24,0.)); +#49528 = VECTOR('',#49529,1.); +#49529 = DIRECTION('',(0.,0.,1.)); +#49530 = ORIENTED_EDGE('',*,*,#49531,.T.); +#49531 = EDGE_CURVE('',#49524,#49532,#49534,.T.); +#49532 = VERTEX_POINT('',#49533); +#49533 = CARTESIAN_POINT('',(2.674938966801,4.24,0.2)); +#49534 = LINE('',#49535,#49536); +#49535 = CARTESIAN_POINT('',(3.,4.24,0.2)); +#49536 = VECTOR('',#49537,1.); +#49537 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49538 = ORIENTED_EDGE('',*,*,#49539,.T.); +#49539 = EDGE_CURVE('',#49532,#49540,#49542,.T.); +#49540 = VERTEX_POINT('',#49541); +#49541 = CARTESIAN_POINT('',(2.5764581915,4.24,0.282635182233)); +#49542 = CIRCLE('',#49543,0.1); +#49543 = AXIS2_PLACEMENT_3D('',#49544,#49545,#49546); +#49544 = CARTESIAN_POINT('',(2.674938966801,4.24,0.3)); +#49545 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49546 = DIRECTION('',(0.,0.,-1.)); +#49547 = ORIENTED_EDGE('',*,*,#49548,.T.); +#49548 = EDGE_CURVE('',#49540,#49549,#49551,.T.); +#49549 = VERTEX_POINT('',#49550); +#49550 = CARTESIAN_POINT('',(2.495442325904,4.24,0.7770944533)); +#49551 = LINE('',#49552,#49553); +#49552 = CARTESIAN_POINT('',(2.5764581915,4.24,0.282635182233)); +#49553 = VECTOR('',#49554,1.); +#49554 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49555 = ORIENTED_EDGE('',*,*,#49556,.T.); +#49556 = EDGE_CURVE('',#49549,#47564,#49557,.T.); +#49557 = CIRCLE('',#49558,0.3); +#49558 = AXIS2_PLACEMENT_3D('',#49559,#49560,#49561); +#49559 = CARTESIAN_POINT('',(2.2,4.24,0.725)); +#49560 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49561 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49562 = ORIENTED_EDGE('',*,*,#47571,.T.); +#49563 = PLANE('',#49564); +#49564 = AXIS2_PLACEMENT_3D('',#49565,#49566,#49567); +#49565 = CARTESIAN_POINT('',(2.410970442936,4.24,0.528115505988)); +#49566 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49567 = DIRECTION('',(0.,0.,1.)); +#49568 = ADVANCED_FACE('',(#49569),#49580,.F.); +#49569 = FACE_BOUND('',#49570,.F.); +#49570 = EDGE_LOOP('',(#49571,#49572,#49573,#49579)); +#49571 = ORIENTED_EDGE('',*,*,#47577,.F.); +#49572 = ORIENTED_EDGE('',*,*,#46630,.T.); +#49573 = ORIENTED_EDGE('',*,*,#49574,.T.); +#49574 = EDGE_CURVE('',#46623,#47414,#49575,.T.); +#49575 = LINE('',#49576,#49577); +#49576 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#49577 = VECTOR('',#49578,1.); +#49578 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49579 = ORIENTED_EDGE('',*,*,#47413,.F.); +#49580 = PLANE('',#49581); +#49581 = AXIS2_PLACEMENT_3D('',#49582,#49583,#49584); +#49582 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#49583 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#49584 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#49585 = ADVANCED_FACE('',(#49586),#49672,.F.); +#49586 = FACE_BOUND('',#49587,.F.); +#49587 = EDGE_LOOP('',(#49588,#49589,#49590,#49599,#49607,#49616,#49624, + #49632,#49640,#49649,#49657,#49666)); +#49588 = ORIENTED_EDGE('',*,*,#46622,.F.); +#49589 = ORIENTED_EDGE('',*,*,#46644,.T.); +#49590 = ORIENTED_EDGE('',*,*,#49591,.T.); +#49591 = EDGE_CURVE('',#46645,#49592,#49594,.T.); +#49592 = VERTEX_POINT('',#49593); +#49593 = CARTESIAN_POINT('',(2.298480775301,3.38,0.742364817767)); +#49594 = CIRCLE('',#49595,0.1); +#49595 = AXIS2_PLACEMENT_3D('',#49596,#49597,#49598); +#49596 = CARTESIAN_POINT('',(2.2,3.38,0.725)); +#49597 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49598 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49599 = ORIENTED_EDGE('',*,*,#49600,.T.); +#49600 = EDGE_CURVE('',#49592,#49601,#49603,.T.); +#49601 = VERTEX_POINT('',#49602); +#49602 = CARTESIAN_POINT('',(2.379496640897,3.38,0.2479055467)); +#49603 = LINE('',#49604,#49605); +#49604 = CARTESIAN_POINT('',(2.298480775301,3.38,0.742364817767)); +#49605 = VECTOR('',#49606,1.); +#49606 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49607 = ORIENTED_EDGE('',*,*,#49608,.T.); +#49608 = EDGE_CURVE('',#49601,#49609,#49611,.T.); +#49609 = VERTEX_POINT('',#49610); +#49610 = CARTESIAN_POINT('',(2.674938966801,3.38,0.)); +#49611 = CIRCLE('',#49612,0.3); +#49612 = AXIS2_PLACEMENT_3D('',#49613,#49614,#49615); +#49613 = CARTESIAN_POINT('',(2.674938966801,3.38,0.3)); +#49614 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49615 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49616 = ORIENTED_EDGE('',*,*,#49617,.T.); +#49617 = EDGE_CURVE('',#49609,#49618,#49620,.T.); +#49618 = VERTEX_POINT('',#49619); +#49619 = CARTESIAN_POINT('',(3.,3.38,0.)); +#49620 = LINE('',#49621,#49622); +#49621 = CARTESIAN_POINT('',(2.674938966801,3.38,0.)); +#49622 = VECTOR('',#49623,1.); +#49623 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49624 = ORIENTED_EDGE('',*,*,#49625,.T.); +#49625 = EDGE_CURVE('',#49618,#49626,#49628,.T.); +#49626 = VERTEX_POINT('',#49627); +#49627 = CARTESIAN_POINT('',(3.,3.38,0.2)); +#49628 = LINE('',#49629,#49630); +#49629 = CARTESIAN_POINT('',(3.,3.38,0.)); +#49630 = VECTOR('',#49631,1.); +#49631 = DIRECTION('',(0.,0.,1.)); +#49632 = ORIENTED_EDGE('',*,*,#49633,.T.); +#49633 = EDGE_CURVE('',#49626,#49634,#49636,.T.); +#49634 = VERTEX_POINT('',#49635); +#49635 = CARTESIAN_POINT('',(2.674938966801,3.38,0.2)); +#49636 = LINE('',#49637,#49638); +#49637 = CARTESIAN_POINT('',(3.,3.38,0.2)); +#49638 = VECTOR('',#49639,1.); +#49639 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49640 = ORIENTED_EDGE('',*,*,#49641,.T.); +#49641 = EDGE_CURVE('',#49634,#49642,#49644,.T.); +#49642 = VERTEX_POINT('',#49643); +#49643 = CARTESIAN_POINT('',(2.5764581915,3.38,0.282635182233)); +#49644 = CIRCLE('',#49645,0.1); +#49645 = AXIS2_PLACEMENT_3D('',#49646,#49647,#49648); +#49646 = CARTESIAN_POINT('',(2.674938966801,3.38,0.3)); +#49647 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49648 = DIRECTION('',(0.,0.,-1.)); +#49649 = ORIENTED_EDGE('',*,*,#49650,.T.); +#49650 = EDGE_CURVE('',#49642,#49651,#49653,.T.); +#49651 = VERTEX_POINT('',#49652); +#49652 = CARTESIAN_POINT('',(2.495442325904,3.38,0.7770944533)); +#49653 = LINE('',#49654,#49655); +#49654 = CARTESIAN_POINT('',(2.5764581915,3.38,0.282635182233)); +#49655 = VECTOR('',#49656,1.); +#49656 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49657 = ORIENTED_EDGE('',*,*,#49658,.T.); +#49658 = EDGE_CURVE('',#49651,#49659,#49661,.T.); +#49659 = VERTEX_POINT('',#49660); +#49660 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#49661 = CIRCLE('',#49662,0.3); +#49662 = AXIS2_PLACEMENT_3D('',#49663,#49664,#49665); +#49663 = CARTESIAN_POINT('',(2.2,3.38,0.725)); +#49664 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49665 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49666 = ORIENTED_EDGE('',*,*,#49667,.T.); +#49667 = EDGE_CURVE('',#49659,#46623,#49668,.T.); +#49668 = LINE('',#49669,#49670); +#49669 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#49670 = VECTOR('',#49671,1.); +#49671 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49672 = PLANE('',#49673); +#49673 = AXIS2_PLACEMENT_3D('',#49674,#49675,#49676); +#49674 = CARTESIAN_POINT('',(2.410970442936,3.38,0.528115505988)); +#49675 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49676 = DIRECTION('',(0.,0.,1.)); +#49677 = ADVANCED_FACE('',(#49678),#49697,.F.); +#49678 = FACE_BOUND('',#49679,.F.); +#49679 = EDGE_LOOP('',(#49680,#49681,#49690,#49696)); +#49680 = ORIENTED_EDGE('',*,*,#46661,.T.); +#49681 = ORIENTED_EDGE('',*,*,#49682,.T.); +#49682 = EDGE_CURVE('',#46654,#49683,#49685,.T.); +#49683 = VERTEX_POINT('',#49684); +#49684 = CARTESIAN_POINT('',(2.298480775301,2.97,0.742364817767)); +#49685 = CIRCLE('',#49686,0.1); +#49686 = AXIS2_PLACEMENT_3D('',#49687,#49688,#49689); +#49687 = CARTESIAN_POINT('',(2.2,2.97,0.725)); +#49688 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49689 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49690 = ORIENTED_EDGE('',*,*,#49691,.F.); +#49691 = EDGE_CURVE('',#49592,#49683,#49692,.T.); +#49692 = LINE('',#49693,#49694); +#49693 = CARTESIAN_POINT('',(2.298480775301,3.38,0.742364817767)); +#49694 = VECTOR('',#49695,1.); +#49695 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49696 = ORIENTED_EDGE('',*,*,#49591,.F.); +#49697 = CYLINDRICAL_SURFACE('',#49698,0.1); +#49698 = AXIS2_PLACEMENT_3D('',#49699,#49700,#49701); +#49699 = CARTESIAN_POINT('',(2.2,3.38,0.725)); +#49700 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49701 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49702 = ADVANCED_FACE('',(#49703),#49781,.T.); +#49703 = FACE_BOUND('',#49704,.T.); +#49704 = EDGE_LOOP('',(#49705,#49706,#49707,#49708,#49716,#49725,#49733, + #49741,#49749,#49758,#49766,#49775)); +#49705 = ORIENTED_EDGE('',*,*,#46675,.F.); +#49706 = ORIENTED_EDGE('',*,*,#46653,.T.); +#49707 = ORIENTED_EDGE('',*,*,#49682,.T.); +#49708 = ORIENTED_EDGE('',*,*,#49709,.T.); +#49709 = EDGE_CURVE('',#49683,#49710,#49712,.T.); +#49710 = VERTEX_POINT('',#49711); +#49711 = CARTESIAN_POINT('',(2.379496640897,2.97,0.2479055467)); +#49712 = LINE('',#49713,#49714); +#49713 = CARTESIAN_POINT('',(2.298480775301,2.97,0.742364817767)); +#49714 = VECTOR('',#49715,1.); +#49715 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49716 = ORIENTED_EDGE('',*,*,#49717,.T.); +#49717 = EDGE_CURVE('',#49710,#49718,#49720,.T.); +#49718 = VERTEX_POINT('',#49719); +#49719 = CARTESIAN_POINT('',(2.674938966801,2.97,0.)); +#49720 = CIRCLE('',#49721,0.3); +#49721 = AXIS2_PLACEMENT_3D('',#49722,#49723,#49724); +#49722 = CARTESIAN_POINT('',(2.674938966801,2.97,0.3)); +#49723 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49724 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49725 = ORIENTED_EDGE('',*,*,#49726,.T.); +#49726 = EDGE_CURVE('',#49718,#49727,#49729,.T.); +#49727 = VERTEX_POINT('',#49728); +#49728 = CARTESIAN_POINT('',(3.,2.97,0.)); +#49729 = LINE('',#49730,#49731); +#49730 = CARTESIAN_POINT('',(2.674938966801,2.97,0.)); +#49731 = VECTOR('',#49732,1.); +#49732 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49733 = ORIENTED_EDGE('',*,*,#49734,.T.); +#49734 = EDGE_CURVE('',#49727,#49735,#49737,.T.); +#49735 = VERTEX_POINT('',#49736); +#49736 = CARTESIAN_POINT('',(3.,2.97,0.2)); +#49737 = LINE('',#49738,#49739); +#49738 = CARTESIAN_POINT('',(3.,2.97,0.)); +#49739 = VECTOR('',#49740,1.); +#49740 = DIRECTION('',(0.,0.,1.)); +#49741 = ORIENTED_EDGE('',*,*,#49742,.T.); +#49742 = EDGE_CURVE('',#49735,#49743,#49745,.T.); +#49743 = VERTEX_POINT('',#49744); +#49744 = CARTESIAN_POINT('',(2.674938966801,2.97,0.2)); +#49745 = LINE('',#49746,#49747); +#49746 = CARTESIAN_POINT('',(3.,2.97,0.2)); +#49747 = VECTOR('',#49748,1.); +#49748 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49749 = ORIENTED_EDGE('',*,*,#49750,.T.); +#49750 = EDGE_CURVE('',#49743,#49751,#49753,.T.); +#49751 = VERTEX_POINT('',#49752); +#49752 = CARTESIAN_POINT('',(2.5764581915,2.97,0.282635182233)); +#49753 = CIRCLE('',#49754,0.1); +#49754 = AXIS2_PLACEMENT_3D('',#49755,#49756,#49757); +#49755 = CARTESIAN_POINT('',(2.674938966801,2.97,0.3)); +#49756 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49757 = DIRECTION('',(0.,0.,-1.)); +#49758 = ORIENTED_EDGE('',*,*,#49759,.T.); +#49759 = EDGE_CURVE('',#49751,#49760,#49762,.T.); +#49760 = VERTEX_POINT('',#49761); +#49761 = CARTESIAN_POINT('',(2.495442325904,2.97,0.7770944533)); +#49762 = LINE('',#49763,#49764); +#49763 = CARTESIAN_POINT('',(2.5764581915,2.97,0.282635182233)); +#49764 = VECTOR('',#49765,1.); +#49765 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49766 = ORIENTED_EDGE('',*,*,#49767,.T.); +#49767 = EDGE_CURVE('',#49760,#49768,#49770,.T.); +#49768 = VERTEX_POINT('',#49769); +#49769 = CARTESIAN_POINT('',(2.2,2.97,1.025)); +#49770 = CIRCLE('',#49771,0.3); +#49771 = AXIS2_PLACEMENT_3D('',#49772,#49773,#49774); +#49772 = CARTESIAN_POINT('',(2.2,2.97,0.725)); +#49773 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49774 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49775 = ORIENTED_EDGE('',*,*,#49776,.T.); +#49776 = EDGE_CURVE('',#49768,#46676,#49777,.T.); +#49777 = LINE('',#49778,#49779); +#49778 = CARTESIAN_POINT('',(2.2,2.97,1.025)); +#49779 = VECTOR('',#49780,1.); +#49780 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49781 = PLANE('',#49782); +#49782 = AXIS2_PLACEMENT_3D('',#49783,#49784,#49785); +#49783 = CARTESIAN_POINT('',(2.410970442936,2.97,0.528115505988)); +#49784 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49785 = DIRECTION('',(0.,0.,1.)); +#49786 = ADVANCED_FACE('',(#49787),#49803,.F.); +#49787 = FACE_BOUND('',#49788,.F.); +#49788 = EDGE_LOOP('',(#49789,#49795,#49796,#49802)); +#49789 = ORIENTED_EDGE('',*,*,#49790,.F.); +#49790 = EDGE_CURVE('',#46676,#47422,#49791,.T.); +#49791 = LINE('',#49792,#49793); +#49792 = CARTESIAN_POINT('',(2.2,2.97,1.025)); +#49793 = VECTOR('',#49794,1.); +#49794 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49795 = ORIENTED_EDGE('',*,*,#46692,.T.); +#49796 = ORIENTED_EDGE('',*,*,#49797,.T.); +#49797 = EDGE_CURVE('',#46685,#47430,#49798,.T.); +#49798 = LINE('',#49799,#49800); +#49799 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#49800 = VECTOR('',#49801,1.); +#49801 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49802 = ORIENTED_EDGE('',*,*,#47429,.F.); +#49803 = PLANE('',#49804); +#49804 = AXIS2_PLACEMENT_3D('',#49805,#49806,#49807); +#49805 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#49806 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#49807 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#49808 = ADVANCED_FACE('',(#49809),#49895,.F.); +#49809 = FACE_BOUND('',#49810,.F.); +#49810 = EDGE_LOOP('',(#49811,#49812,#49813,#49822,#49830,#49839,#49847, + #49855,#49863,#49872,#49880,#49889)); +#49811 = ORIENTED_EDGE('',*,*,#46684,.F.); +#49812 = ORIENTED_EDGE('',*,*,#46706,.T.); +#49813 = ORIENTED_EDGE('',*,*,#49814,.T.); +#49814 = EDGE_CURVE('',#46707,#49815,#49817,.T.); +#49815 = VERTEX_POINT('',#49816); +#49816 = CARTESIAN_POINT('',(2.298480775301,2.11,0.742364817767)); +#49817 = CIRCLE('',#49818,0.1); +#49818 = AXIS2_PLACEMENT_3D('',#49819,#49820,#49821); +#49819 = CARTESIAN_POINT('',(2.2,2.11,0.725)); +#49820 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49821 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49822 = ORIENTED_EDGE('',*,*,#49823,.T.); +#49823 = EDGE_CURVE('',#49815,#49824,#49826,.T.); +#49824 = VERTEX_POINT('',#49825); +#49825 = CARTESIAN_POINT('',(2.379496640897,2.11,0.2479055467)); +#49826 = LINE('',#49827,#49828); +#49827 = CARTESIAN_POINT('',(2.298480775301,2.11,0.742364817767)); +#49828 = VECTOR('',#49829,1.); +#49829 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49830 = ORIENTED_EDGE('',*,*,#49831,.T.); +#49831 = EDGE_CURVE('',#49824,#49832,#49834,.T.); +#49832 = VERTEX_POINT('',#49833); +#49833 = CARTESIAN_POINT('',(2.674938966801,2.11,0.)); +#49834 = CIRCLE('',#49835,0.3); +#49835 = AXIS2_PLACEMENT_3D('',#49836,#49837,#49838); +#49836 = CARTESIAN_POINT('',(2.674938966801,2.11,0.3)); +#49837 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49838 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49839 = ORIENTED_EDGE('',*,*,#49840,.T.); +#49840 = EDGE_CURVE('',#49832,#49841,#49843,.T.); +#49841 = VERTEX_POINT('',#49842); +#49842 = CARTESIAN_POINT('',(3.,2.11,0.)); +#49843 = LINE('',#49844,#49845); +#49844 = CARTESIAN_POINT('',(2.674938966801,2.11,0.)); +#49845 = VECTOR('',#49846,1.); +#49846 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49847 = ORIENTED_EDGE('',*,*,#49848,.T.); +#49848 = EDGE_CURVE('',#49841,#49849,#49851,.T.); +#49849 = VERTEX_POINT('',#49850); +#49850 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#49851 = LINE('',#49852,#49853); +#49852 = CARTESIAN_POINT('',(3.,2.11,0.)); +#49853 = VECTOR('',#49854,1.); +#49854 = DIRECTION('',(0.,0.,1.)); +#49855 = ORIENTED_EDGE('',*,*,#49856,.T.); +#49856 = EDGE_CURVE('',#49849,#49857,#49859,.T.); +#49857 = VERTEX_POINT('',#49858); +#49858 = CARTESIAN_POINT('',(2.674938966801,2.11,0.2)); +#49859 = LINE('',#49860,#49861); +#49860 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#49861 = VECTOR('',#49862,1.); +#49862 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49863 = ORIENTED_EDGE('',*,*,#49864,.T.); +#49864 = EDGE_CURVE('',#49857,#49865,#49867,.T.); +#49865 = VERTEX_POINT('',#49866); +#49866 = CARTESIAN_POINT('',(2.5764581915,2.11,0.282635182233)); +#49867 = CIRCLE('',#49868,0.1); +#49868 = AXIS2_PLACEMENT_3D('',#49869,#49870,#49871); +#49869 = CARTESIAN_POINT('',(2.674938966801,2.11,0.3)); +#49870 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49871 = DIRECTION('',(0.,0.,-1.)); +#49872 = ORIENTED_EDGE('',*,*,#49873,.T.); +#49873 = EDGE_CURVE('',#49865,#49874,#49876,.T.); +#49874 = VERTEX_POINT('',#49875); +#49875 = CARTESIAN_POINT('',(2.495442325904,2.11,0.7770944533)); +#49876 = LINE('',#49877,#49878); +#49877 = CARTESIAN_POINT('',(2.5764581915,2.11,0.282635182233)); +#49878 = VECTOR('',#49879,1.); +#49879 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49880 = ORIENTED_EDGE('',*,*,#49881,.T.); +#49881 = EDGE_CURVE('',#49874,#49882,#49884,.T.); +#49882 = VERTEX_POINT('',#49883); +#49883 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#49884 = CIRCLE('',#49885,0.3); +#49885 = AXIS2_PLACEMENT_3D('',#49886,#49887,#49888); +#49886 = CARTESIAN_POINT('',(2.2,2.11,0.725)); +#49887 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49888 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49889 = ORIENTED_EDGE('',*,*,#49890,.T.); +#49890 = EDGE_CURVE('',#49882,#46685,#49891,.T.); +#49891 = LINE('',#49892,#49893); +#49892 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#49893 = VECTOR('',#49894,1.); +#49894 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49895 = PLANE('',#49896); +#49896 = AXIS2_PLACEMENT_3D('',#49897,#49898,#49899); +#49897 = CARTESIAN_POINT('',(2.410970442936,2.11,0.528115505988)); +#49898 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49899 = DIRECTION('',(0.,0.,1.)); +#49900 = ADVANCED_FACE('',(#49901),#49920,.F.); +#49901 = FACE_BOUND('',#49902,.F.); +#49902 = EDGE_LOOP('',(#49903,#49904,#49913,#49919)); +#49903 = ORIENTED_EDGE('',*,*,#46723,.T.); +#49904 = ORIENTED_EDGE('',*,*,#49905,.T.); +#49905 = EDGE_CURVE('',#46716,#49906,#49908,.T.); +#49906 = VERTEX_POINT('',#49907); +#49907 = CARTESIAN_POINT('',(2.298480775301,1.7,0.742364817767)); +#49908 = CIRCLE('',#49909,0.1); +#49909 = AXIS2_PLACEMENT_3D('',#49910,#49911,#49912); +#49910 = CARTESIAN_POINT('',(2.2,1.7,0.725)); +#49911 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49912 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49913 = ORIENTED_EDGE('',*,*,#49914,.F.); +#49914 = EDGE_CURVE('',#49815,#49906,#49915,.T.); +#49915 = LINE('',#49916,#49917); +#49916 = CARTESIAN_POINT('',(2.298480775301,2.11,0.742364817767)); +#49917 = VECTOR('',#49918,1.); +#49918 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49919 = ORIENTED_EDGE('',*,*,#49814,.F.); +#49920 = CYLINDRICAL_SURFACE('',#49921,0.1); +#49921 = AXIS2_PLACEMENT_3D('',#49922,#49923,#49924); +#49922 = CARTESIAN_POINT('',(2.2,2.11,0.725)); +#49923 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49924 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#49925 = ADVANCED_FACE('',(#49926),#50004,.T.); +#49926 = FACE_BOUND('',#49927,.T.); +#49927 = EDGE_LOOP('',(#49928,#49929,#49930,#49931,#49939,#49948,#49956, + #49964,#49972,#49981,#49989,#49998)); +#49928 = ORIENTED_EDGE('',*,*,#46737,.F.); +#49929 = ORIENTED_EDGE('',*,*,#46715,.T.); +#49930 = ORIENTED_EDGE('',*,*,#49905,.T.); +#49931 = ORIENTED_EDGE('',*,*,#49932,.T.); +#49932 = EDGE_CURVE('',#49906,#49933,#49935,.T.); +#49933 = VERTEX_POINT('',#49934); +#49934 = CARTESIAN_POINT('',(2.379496640897,1.7,0.2479055467)); +#49935 = LINE('',#49936,#49937); +#49936 = CARTESIAN_POINT('',(2.298480775301,1.7,0.742364817767)); +#49937 = VECTOR('',#49938,1.); +#49938 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#49939 = ORIENTED_EDGE('',*,*,#49940,.T.); +#49940 = EDGE_CURVE('',#49933,#49941,#49943,.T.); +#49941 = VERTEX_POINT('',#49942); +#49942 = CARTESIAN_POINT('',(2.674938966801,1.7,0.)); +#49943 = CIRCLE('',#49944,0.3); +#49944 = AXIS2_PLACEMENT_3D('',#49945,#49946,#49947); +#49945 = CARTESIAN_POINT('',(2.674938966801,1.7,0.3)); +#49946 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49947 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#49948 = ORIENTED_EDGE('',*,*,#49949,.T.); +#49949 = EDGE_CURVE('',#49941,#49950,#49952,.T.); +#49950 = VERTEX_POINT('',#49951); +#49951 = CARTESIAN_POINT('',(3.,1.7,0.)); +#49952 = LINE('',#49953,#49954); +#49953 = CARTESIAN_POINT('',(2.674938966801,1.7,0.)); +#49954 = VECTOR('',#49955,1.); +#49955 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#49956 = ORIENTED_EDGE('',*,*,#49957,.T.); +#49957 = EDGE_CURVE('',#49950,#49958,#49960,.T.); +#49958 = VERTEX_POINT('',#49959); +#49959 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#49960 = LINE('',#49961,#49962); +#49961 = CARTESIAN_POINT('',(3.,1.7,0.)); +#49962 = VECTOR('',#49963,1.); +#49963 = DIRECTION('',(0.,0.,1.)); +#49964 = ORIENTED_EDGE('',*,*,#49965,.T.); +#49965 = EDGE_CURVE('',#49958,#49966,#49968,.T.); +#49966 = VERTEX_POINT('',#49967); +#49967 = CARTESIAN_POINT('',(2.674938966801,1.7,0.2)); +#49968 = LINE('',#49969,#49970); +#49969 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#49970 = VECTOR('',#49971,1.); +#49971 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#49972 = ORIENTED_EDGE('',*,*,#49973,.T.); +#49973 = EDGE_CURVE('',#49966,#49974,#49976,.T.); +#49974 = VERTEX_POINT('',#49975); +#49975 = CARTESIAN_POINT('',(2.5764581915,1.7,0.282635182233)); +#49976 = CIRCLE('',#49977,0.1); +#49977 = AXIS2_PLACEMENT_3D('',#49978,#49979,#49980); +#49978 = CARTESIAN_POINT('',(2.674938966801,1.7,0.3)); +#49979 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#49980 = DIRECTION('',(0.,0.,-1.)); +#49981 = ORIENTED_EDGE('',*,*,#49982,.T.); +#49982 = EDGE_CURVE('',#49974,#49983,#49985,.T.); +#49983 = VERTEX_POINT('',#49984); +#49984 = CARTESIAN_POINT('',(2.495442325904,1.7,0.7770944533)); +#49985 = LINE('',#49986,#49987); +#49986 = CARTESIAN_POINT('',(2.5764581915,1.7,0.282635182233)); +#49987 = VECTOR('',#49988,1.); +#49988 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#49989 = ORIENTED_EDGE('',*,*,#49990,.T.); +#49990 = EDGE_CURVE('',#49983,#49991,#49993,.T.); +#49991 = VERTEX_POINT('',#49992); +#49992 = CARTESIAN_POINT('',(2.2,1.7,1.025)); +#49993 = CIRCLE('',#49994,0.3); +#49994 = AXIS2_PLACEMENT_3D('',#49995,#49996,#49997); +#49995 = CARTESIAN_POINT('',(2.2,1.7,0.725)); +#49996 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#49997 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#49998 = ORIENTED_EDGE('',*,*,#49999,.T.); +#49999 = EDGE_CURVE('',#49991,#46738,#50000,.T.); +#50000 = LINE('',#50001,#50002); +#50001 = CARTESIAN_POINT('',(2.2,1.7,1.025)); +#50002 = VECTOR('',#50003,1.); +#50003 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50004 = PLANE('',#50005); +#50005 = AXIS2_PLACEMENT_3D('',#50006,#50007,#50008); +#50006 = CARTESIAN_POINT('',(2.410970442936,1.7,0.528115505988)); +#50007 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50008 = DIRECTION('',(0.,0.,1.)); +#50009 = ADVANCED_FACE('',(#50010),#50026,.F.); +#50010 = FACE_BOUND('',#50011,.F.); +#50011 = EDGE_LOOP('',(#50012,#50018,#50019,#50025)); +#50012 = ORIENTED_EDGE('',*,*,#50013,.F.); +#50013 = EDGE_CURVE('',#46738,#47438,#50014,.T.); +#50014 = LINE('',#50015,#50016); +#50015 = CARTESIAN_POINT('',(2.2,1.7,1.025)); +#50016 = VECTOR('',#50017,1.); +#50017 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50018 = ORIENTED_EDGE('',*,*,#46754,.T.); +#50019 = ORIENTED_EDGE('',*,*,#50020,.T.); +#50020 = EDGE_CURVE('',#46747,#47446,#50021,.T.); +#50021 = LINE('',#50022,#50023); +#50022 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#50023 = VECTOR('',#50024,1.); +#50024 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50025 = ORIENTED_EDGE('',*,*,#47445,.F.); +#50026 = PLANE('',#50027); +#50027 = AXIS2_PLACEMENT_3D('',#50028,#50029,#50030); +#50028 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#50029 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#50030 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#50031 = ADVANCED_FACE('',(#50032),#50118,.F.); +#50032 = FACE_BOUND('',#50033,.F.); +#50033 = EDGE_LOOP('',(#50034,#50035,#50036,#50045,#50053,#50062,#50070, + #50078,#50086,#50095,#50103,#50112)); +#50034 = ORIENTED_EDGE('',*,*,#46746,.F.); +#50035 = ORIENTED_EDGE('',*,*,#46768,.T.); +#50036 = ORIENTED_EDGE('',*,*,#50037,.T.); +#50037 = EDGE_CURVE('',#46769,#50038,#50040,.T.); +#50038 = VERTEX_POINT('',#50039); +#50039 = CARTESIAN_POINT('',(2.298480775301,0.84,0.742364817767)); +#50040 = CIRCLE('',#50041,0.1); +#50041 = AXIS2_PLACEMENT_3D('',#50042,#50043,#50044); +#50042 = CARTESIAN_POINT('',(2.2,0.84,0.725)); +#50043 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50044 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50045 = ORIENTED_EDGE('',*,*,#50046,.T.); +#50046 = EDGE_CURVE('',#50038,#50047,#50049,.T.); +#50047 = VERTEX_POINT('',#50048); +#50048 = CARTESIAN_POINT('',(2.379496640897,0.84,0.2479055467)); +#50049 = LINE('',#50050,#50051); +#50050 = CARTESIAN_POINT('',(2.298480775301,0.84,0.742364817767)); +#50051 = VECTOR('',#50052,1.); +#50052 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50053 = ORIENTED_EDGE('',*,*,#50054,.T.); +#50054 = EDGE_CURVE('',#50047,#50055,#50057,.T.); +#50055 = VERTEX_POINT('',#50056); +#50056 = CARTESIAN_POINT('',(2.674938966801,0.84,0.)); +#50057 = CIRCLE('',#50058,0.3); +#50058 = AXIS2_PLACEMENT_3D('',#50059,#50060,#50061); +#50059 = CARTESIAN_POINT('',(2.674938966801,0.84,0.3)); +#50060 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50061 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50062 = ORIENTED_EDGE('',*,*,#50063,.T.); +#50063 = EDGE_CURVE('',#50055,#50064,#50066,.T.); +#50064 = VERTEX_POINT('',#50065); +#50065 = CARTESIAN_POINT('',(3.,0.84,0.)); +#50066 = LINE('',#50067,#50068); +#50067 = CARTESIAN_POINT('',(2.674938966801,0.84,0.)); +#50068 = VECTOR('',#50069,1.); +#50069 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50070 = ORIENTED_EDGE('',*,*,#50071,.T.); +#50071 = EDGE_CURVE('',#50064,#50072,#50074,.T.); +#50072 = VERTEX_POINT('',#50073); +#50073 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#50074 = LINE('',#50075,#50076); +#50075 = CARTESIAN_POINT('',(3.,0.84,0.)); +#50076 = VECTOR('',#50077,1.); +#50077 = DIRECTION('',(0.,0.,1.)); +#50078 = ORIENTED_EDGE('',*,*,#50079,.T.); +#50079 = EDGE_CURVE('',#50072,#50080,#50082,.T.); +#50080 = VERTEX_POINT('',#50081); +#50081 = CARTESIAN_POINT('',(2.674938966801,0.84,0.2)); +#50082 = LINE('',#50083,#50084); +#50083 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#50084 = VECTOR('',#50085,1.); +#50085 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50086 = ORIENTED_EDGE('',*,*,#50087,.T.); +#50087 = EDGE_CURVE('',#50080,#50088,#50090,.T.); +#50088 = VERTEX_POINT('',#50089); +#50089 = CARTESIAN_POINT('',(2.5764581915,0.84,0.282635182233)); +#50090 = CIRCLE('',#50091,0.1); +#50091 = AXIS2_PLACEMENT_3D('',#50092,#50093,#50094); +#50092 = CARTESIAN_POINT('',(2.674938966801,0.84,0.3)); +#50093 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50094 = DIRECTION('',(0.,0.,-1.)); +#50095 = ORIENTED_EDGE('',*,*,#50096,.T.); +#50096 = EDGE_CURVE('',#50088,#50097,#50099,.T.); +#50097 = VERTEX_POINT('',#50098); +#50098 = CARTESIAN_POINT('',(2.495442325904,0.84,0.7770944533)); +#50099 = LINE('',#50100,#50101); +#50100 = CARTESIAN_POINT('',(2.5764581915,0.84,0.282635182233)); +#50101 = VECTOR('',#50102,1.); +#50102 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50103 = ORIENTED_EDGE('',*,*,#50104,.T.); +#50104 = EDGE_CURVE('',#50097,#50105,#50107,.T.); +#50105 = VERTEX_POINT('',#50106); +#50106 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#50107 = CIRCLE('',#50108,0.3); +#50108 = AXIS2_PLACEMENT_3D('',#50109,#50110,#50111); +#50109 = CARTESIAN_POINT('',(2.2,0.84,0.725)); +#50110 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50111 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50112 = ORIENTED_EDGE('',*,*,#50113,.T.); +#50113 = EDGE_CURVE('',#50105,#46747,#50114,.T.); +#50114 = LINE('',#50115,#50116); +#50115 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#50116 = VECTOR('',#50117,1.); +#50117 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50118 = PLANE('',#50119); +#50119 = AXIS2_PLACEMENT_3D('',#50120,#50121,#50122); +#50120 = CARTESIAN_POINT('',(2.410970442936,0.84,0.528115505988)); +#50121 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50122 = DIRECTION('',(0.,0.,1.)); +#50123 = ADVANCED_FACE('',(#50124),#50143,.F.); +#50124 = FACE_BOUND('',#50125,.F.); +#50125 = EDGE_LOOP('',(#50126,#50127,#50136,#50142)); +#50126 = ORIENTED_EDGE('',*,*,#46785,.T.); +#50127 = ORIENTED_EDGE('',*,*,#50128,.T.); +#50128 = EDGE_CURVE('',#46778,#50129,#50131,.T.); +#50129 = VERTEX_POINT('',#50130); +#50130 = CARTESIAN_POINT('',(2.298480775301,0.43,0.742364817767)); +#50131 = CIRCLE('',#50132,0.1); +#50132 = AXIS2_PLACEMENT_3D('',#50133,#50134,#50135); +#50133 = CARTESIAN_POINT('',(2.2,0.43,0.725)); +#50134 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50135 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50136 = ORIENTED_EDGE('',*,*,#50137,.F.); +#50137 = EDGE_CURVE('',#50038,#50129,#50138,.T.); +#50138 = LINE('',#50139,#50140); +#50139 = CARTESIAN_POINT('',(2.298480775301,0.84,0.742364817767)); +#50140 = VECTOR('',#50141,1.); +#50141 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50142 = ORIENTED_EDGE('',*,*,#50037,.F.); +#50143 = CYLINDRICAL_SURFACE('',#50144,0.1); +#50144 = AXIS2_PLACEMENT_3D('',#50145,#50146,#50147); +#50145 = CARTESIAN_POINT('',(2.2,0.84,0.725)); +#50146 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50147 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50148 = ADVANCED_FACE('',(#50149),#50227,.T.); +#50149 = FACE_BOUND('',#50150,.T.); +#50150 = EDGE_LOOP('',(#50151,#50152,#50153,#50154,#50162,#50171,#50179, + #50187,#50195,#50204,#50212,#50221)); +#50151 = ORIENTED_EDGE('',*,*,#46799,.F.); +#50152 = ORIENTED_EDGE('',*,*,#46777,.T.); +#50153 = ORIENTED_EDGE('',*,*,#50128,.T.); +#50154 = ORIENTED_EDGE('',*,*,#50155,.T.); +#50155 = EDGE_CURVE('',#50129,#50156,#50158,.T.); +#50156 = VERTEX_POINT('',#50157); +#50157 = CARTESIAN_POINT('',(2.379496640897,0.43,0.2479055467)); +#50158 = LINE('',#50159,#50160); +#50159 = CARTESIAN_POINT('',(2.298480775301,0.43,0.742364817767)); +#50160 = VECTOR('',#50161,1.); +#50161 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50162 = ORIENTED_EDGE('',*,*,#50163,.T.); +#50163 = EDGE_CURVE('',#50156,#50164,#50166,.T.); +#50164 = VERTEX_POINT('',#50165); +#50165 = CARTESIAN_POINT('',(2.674938966801,0.43,0.)); +#50166 = CIRCLE('',#50167,0.3); +#50167 = AXIS2_PLACEMENT_3D('',#50168,#50169,#50170); +#50168 = CARTESIAN_POINT('',(2.674938966801,0.43,0.3)); +#50169 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50170 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50171 = ORIENTED_EDGE('',*,*,#50172,.T.); +#50172 = EDGE_CURVE('',#50164,#50173,#50175,.T.); +#50173 = VERTEX_POINT('',#50174); +#50174 = CARTESIAN_POINT('',(3.,0.43,0.)); +#50175 = LINE('',#50176,#50177); +#50176 = CARTESIAN_POINT('',(2.674938966801,0.43,0.)); +#50177 = VECTOR('',#50178,1.); +#50178 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50179 = ORIENTED_EDGE('',*,*,#50180,.T.); +#50180 = EDGE_CURVE('',#50173,#50181,#50183,.T.); +#50181 = VERTEX_POINT('',#50182); +#50182 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#50183 = LINE('',#50184,#50185); +#50184 = CARTESIAN_POINT('',(3.,0.43,0.)); +#50185 = VECTOR('',#50186,1.); +#50186 = DIRECTION('',(0.,0.,1.)); +#50187 = ORIENTED_EDGE('',*,*,#50188,.T.); +#50188 = EDGE_CURVE('',#50181,#50189,#50191,.T.); +#50189 = VERTEX_POINT('',#50190); +#50190 = CARTESIAN_POINT('',(2.674938966801,0.43,0.2)); +#50191 = LINE('',#50192,#50193); +#50192 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#50193 = VECTOR('',#50194,1.); +#50194 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50195 = ORIENTED_EDGE('',*,*,#50196,.T.); +#50196 = EDGE_CURVE('',#50189,#50197,#50199,.T.); +#50197 = VERTEX_POINT('',#50198); +#50198 = CARTESIAN_POINT('',(2.5764581915,0.43,0.282635182233)); +#50199 = CIRCLE('',#50200,0.1); +#50200 = AXIS2_PLACEMENT_3D('',#50201,#50202,#50203); +#50201 = CARTESIAN_POINT('',(2.674938966801,0.43,0.3)); +#50202 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50203 = DIRECTION('',(0.,0.,-1.)); +#50204 = ORIENTED_EDGE('',*,*,#50205,.T.); +#50205 = EDGE_CURVE('',#50197,#50206,#50208,.T.); +#50206 = VERTEX_POINT('',#50207); +#50207 = CARTESIAN_POINT('',(2.495442325904,0.43,0.7770944533)); +#50208 = LINE('',#50209,#50210); +#50209 = CARTESIAN_POINT('',(2.5764581915,0.43,0.282635182233)); +#50210 = VECTOR('',#50211,1.); +#50211 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50212 = ORIENTED_EDGE('',*,*,#50213,.T.); +#50213 = EDGE_CURVE('',#50206,#50214,#50216,.T.); +#50214 = VERTEX_POINT('',#50215); +#50215 = CARTESIAN_POINT('',(2.2,0.43,1.025)); +#50216 = CIRCLE('',#50217,0.3); +#50217 = AXIS2_PLACEMENT_3D('',#50218,#50219,#50220); +#50218 = CARTESIAN_POINT('',(2.2,0.43,0.725)); +#50219 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50220 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50221 = ORIENTED_EDGE('',*,*,#50222,.T.); +#50222 = EDGE_CURVE('',#50214,#46800,#50223,.T.); +#50223 = LINE('',#50224,#50225); +#50224 = CARTESIAN_POINT('',(2.2,0.43,1.025)); +#50225 = VECTOR('',#50226,1.); +#50226 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50227 = PLANE('',#50228); +#50228 = AXIS2_PLACEMENT_3D('',#50229,#50230,#50231); +#50229 = CARTESIAN_POINT('',(2.410970442936,0.43,0.528115505988)); +#50230 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50231 = DIRECTION('',(0.,0.,1.)); +#50232 = ADVANCED_FACE('',(#50233),#50249,.F.); +#50233 = FACE_BOUND('',#50234,.F.); +#50234 = EDGE_LOOP('',(#50235,#50241,#50242,#50248)); +#50235 = ORIENTED_EDGE('',*,*,#50236,.F.); +#50236 = EDGE_CURVE('',#46800,#47454,#50237,.T.); +#50237 = LINE('',#50238,#50239); +#50238 = CARTESIAN_POINT('',(2.2,0.43,1.025)); +#50239 = VECTOR('',#50240,1.); +#50240 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50241 = ORIENTED_EDGE('',*,*,#46816,.T.); +#50242 = ORIENTED_EDGE('',*,*,#50243,.T.); +#50243 = EDGE_CURVE('',#46809,#47462,#50244,.T.); +#50244 = LINE('',#50245,#50246); +#50245 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#50246 = VECTOR('',#50247,1.); +#50247 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50248 = ORIENTED_EDGE('',*,*,#47461,.F.); +#50249 = PLANE('',#50250); +#50250 = AXIS2_PLACEMENT_3D('',#50251,#50252,#50253); +#50251 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#50252 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#50253 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#50254 = ADVANCED_FACE('',(#50255),#50341,.F.); +#50255 = FACE_BOUND('',#50256,.F.); +#50256 = EDGE_LOOP('',(#50257,#50258,#50259,#50268,#50276,#50285,#50293, + #50301,#50309,#50318,#50326,#50335)); +#50257 = ORIENTED_EDGE('',*,*,#46808,.F.); +#50258 = ORIENTED_EDGE('',*,*,#46830,.T.); +#50259 = ORIENTED_EDGE('',*,*,#50260,.T.); +#50260 = EDGE_CURVE('',#46831,#50261,#50263,.T.); +#50261 = VERTEX_POINT('',#50262); +#50262 = CARTESIAN_POINT('',(2.298480775301,-0.43,0.742364817767)); +#50263 = CIRCLE('',#50264,0.1); +#50264 = AXIS2_PLACEMENT_3D('',#50265,#50266,#50267); +#50265 = CARTESIAN_POINT('',(2.2,-0.43,0.725)); +#50266 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50267 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50268 = ORIENTED_EDGE('',*,*,#50269,.T.); +#50269 = EDGE_CURVE('',#50261,#50270,#50272,.T.); +#50270 = VERTEX_POINT('',#50271); +#50271 = CARTESIAN_POINT('',(2.379496640897,-0.43,0.2479055467)); +#50272 = LINE('',#50273,#50274); +#50273 = CARTESIAN_POINT('',(2.298480775301,-0.43,0.742364817767)); +#50274 = VECTOR('',#50275,1.); +#50275 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50276 = ORIENTED_EDGE('',*,*,#50277,.T.); +#50277 = EDGE_CURVE('',#50270,#50278,#50280,.T.); +#50278 = VERTEX_POINT('',#50279); +#50279 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.)); +#50280 = CIRCLE('',#50281,0.3); +#50281 = AXIS2_PLACEMENT_3D('',#50282,#50283,#50284); +#50282 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.3)); +#50283 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50284 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50285 = ORIENTED_EDGE('',*,*,#50286,.T.); +#50286 = EDGE_CURVE('',#50278,#50287,#50289,.T.); +#50287 = VERTEX_POINT('',#50288); +#50288 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#50289 = LINE('',#50290,#50291); +#50290 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.)); +#50291 = VECTOR('',#50292,1.); +#50292 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50293 = ORIENTED_EDGE('',*,*,#50294,.T.); +#50294 = EDGE_CURVE('',#50287,#50295,#50297,.T.); +#50295 = VERTEX_POINT('',#50296); +#50296 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#50297 = LINE('',#50298,#50299); +#50298 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#50299 = VECTOR('',#50300,1.); +#50300 = DIRECTION('',(0.,0.,1.)); +#50301 = ORIENTED_EDGE('',*,*,#50302,.T.); +#50302 = EDGE_CURVE('',#50295,#50303,#50305,.T.); +#50303 = VERTEX_POINT('',#50304); +#50304 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.2)); +#50305 = LINE('',#50306,#50307); +#50306 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#50307 = VECTOR('',#50308,1.); +#50308 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50309 = ORIENTED_EDGE('',*,*,#50310,.T.); +#50310 = EDGE_CURVE('',#50303,#50311,#50313,.T.); +#50311 = VERTEX_POINT('',#50312); +#50312 = CARTESIAN_POINT('',(2.5764581915,-0.43,0.282635182233)); +#50313 = CIRCLE('',#50314,0.1); +#50314 = AXIS2_PLACEMENT_3D('',#50315,#50316,#50317); +#50315 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.3)); +#50316 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50317 = DIRECTION('',(0.,0.,-1.)); +#50318 = ORIENTED_EDGE('',*,*,#50319,.T.); +#50319 = EDGE_CURVE('',#50311,#50320,#50322,.T.); +#50320 = VERTEX_POINT('',#50321); +#50321 = CARTESIAN_POINT('',(2.495442325904,-0.43,0.7770944533)); +#50322 = LINE('',#50323,#50324); +#50323 = CARTESIAN_POINT('',(2.5764581915,-0.43,0.282635182233)); +#50324 = VECTOR('',#50325,1.); +#50325 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50326 = ORIENTED_EDGE('',*,*,#50327,.T.); +#50327 = EDGE_CURVE('',#50320,#50328,#50330,.T.); +#50328 = VERTEX_POINT('',#50329); +#50329 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#50330 = CIRCLE('',#50331,0.3); +#50331 = AXIS2_PLACEMENT_3D('',#50332,#50333,#50334); +#50332 = CARTESIAN_POINT('',(2.2,-0.43,0.725)); +#50333 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50334 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50335 = ORIENTED_EDGE('',*,*,#50336,.T.); +#50336 = EDGE_CURVE('',#50328,#46809,#50337,.T.); +#50337 = LINE('',#50338,#50339); +#50338 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#50339 = VECTOR('',#50340,1.); +#50340 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50341 = PLANE('',#50342); +#50342 = AXIS2_PLACEMENT_3D('',#50343,#50344,#50345); +#50343 = CARTESIAN_POINT('',(2.410970442936,-0.43,0.528115505988)); +#50344 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50345 = DIRECTION('',(0.,0.,1.)); +#50346 = ADVANCED_FACE('',(#50347),#50366,.F.); +#50347 = FACE_BOUND('',#50348,.F.); +#50348 = EDGE_LOOP('',(#50349,#50350,#50359,#50365)); +#50349 = ORIENTED_EDGE('',*,*,#46847,.T.); +#50350 = ORIENTED_EDGE('',*,*,#50351,.T.); +#50351 = EDGE_CURVE('',#46840,#50352,#50354,.T.); +#50352 = VERTEX_POINT('',#50353); +#50353 = CARTESIAN_POINT('',(2.298480775301,-0.84,0.742364817767)); +#50354 = CIRCLE('',#50355,0.1); +#50355 = AXIS2_PLACEMENT_3D('',#50356,#50357,#50358); +#50356 = CARTESIAN_POINT('',(2.2,-0.84,0.725)); +#50357 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50358 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50359 = ORIENTED_EDGE('',*,*,#50360,.F.); +#50360 = EDGE_CURVE('',#50261,#50352,#50361,.T.); +#50361 = LINE('',#50362,#50363); +#50362 = CARTESIAN_POINT('',(2.298480775301,-0.43,0.742364817767)); +#50363 = VECTOR('',#50364,1.); +#50364 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50365 = ORIENTED_EDGE('',*,*,#50260,.F.); +#50366 = CYLINDRICAL_SURFACE('',#50367,0.1); +#50367 = AXIS2_PLACEMENT_3D('',#50368,#50369,#50370); +#50368 = CARTESIAN_POINT('',(2.2,-0.43,0.725)); +#50369 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50370 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50371 = ADVANCED_FACE('',(#50372),#50450,.T.); +#50372 = FACE_BOUND('',#50373,.T.); +#50373 = EDGE_LOOP('',(#50374,#50375,#50376,#50377,#50385,#50394,#50402, + #50410,#50418,#50427,#50435,#50444)); +#50374 = ORIENTED_EDGE('',*,*,#46861,.F.); +#50375 = ORIENTED_EDGE('',*,*,#46839,.T.); +#50376 = ORIENTED_EDGE('',*,*,#50351,.T.); +#50377 = ORIENTED_EDGE('',*,*,#50378,.T.); +#50378 = EDGE_CURVE('',#50352,#50379,#50381,.T.); +#50379 = VERTEX_POINT('',#50380); +#50380 = CARTESIAN_POINT('',(2.379496640897,-0.84,0.2479055467)); +#50381 = LINE('',#50382,#50383); +#50382 = CARTESIAN_POINT('',(2.298480775301,-0.84,0.742364817767)); +#50383 = VECTOR('',#50384,1.); +#50384 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50385 = ORIENTED_EDGE('',*,*,#50386,.T.); +#50386 = EDGE_CURVE('',#50379,#50387,#50389,.T.); +#50387 = VERTEX_POINT('',#50388); +#50388 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.)); +#50389 = CIRCLE('',#50390,0.3); +#50390 = AXIS2_PLACEMENT_3D('',#50391,#50392,#50393); +#50391 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.3)); +#50392 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50393 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50394 = ORIENTED_EDGE('',*,*,#50395,.T.); +#50395 = EDGE_CURVE('',#50387,#50396,#50398,.T.); +#50396 = VERTEX_POINT('',#50397); +#50397 = CARTESIAN_POINT('',(3.,-0.84,0.)); +#50398 = LINE('',#50399,#50400); +#50399 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.)); +#50400 = VECTOR('',#50401,1.); +#50401 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50402 = ORIENTED_EDGE('',*,*,#50403,.T.); +#50403 = EDGE_CURVE('',#50396,#50404,#50406,.T.); +#50404 = VERTEX_POINT('',#50405); +#50405 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#50406 = LINE('',#50407,#50408); +#50407 = CARTESIAN_POINT('',(3.,-0.84,0.)); +#50408 = VECTOR('',#50409,1.); +#50409 = DIRECTION('',(0.,0.,1.)); +#50410 = ORIENTED_EDGE('',*,*,#50411,.T.); +#50411 = EDGE_CURVE('',#50404,#50412,#50414,.T.); +#50412 = VERTEX_POINT('',#50413); +#50413 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.2)); +#50414 = LINE('',#50415,#50416); +#50415 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#50416 = VECTOR('',#50417,1.); +#50417 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50418 = ORIENTED_EDGE('',*,*,#50419,.T.); +#50419 = EDGE_CURVE('',#50412,#50420,#50422,.T.); +#50420 = VERTEX_POINT('',#50421); +#50421 = CARTESIAN_POINT('',(2.5764581915,-0.84,0.282635182233)); +#50422 = CIRCLE('',#50423,0.1); +#50423 = AXIS2_PLACEMENT_3D('',#50424,#50425,#50426); +#50424 = CARTESIAN_POINT('',(2.674938966801,-0.84,0.3)); +#50425 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50426 = DIRECTION('',(0.,0.,-1.)); +#50427 = ORIENTED_EDGE('',*,*,#50428,.T.); +#50428 = EDGE_CURVE('',#50420,#50429,#50431,.T.); +#50429 = VERTEX_POINT('',#50430); +#50430 = CARTESIAN_POINT('',(2.495442325904,-0.84,0.7770944533)); +#50431 = LINE('',#50432,#50433); +#50432 = CARTESIAN_POINT('',(2.5764581915,-0.84,0.282635182233)); +#50433 = VECTOR('',#50434,1.); +#50434 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50435 = ORIENTED_EDGE('',*,*,#50436,.T.); +#50436 = EDGE_CURVE('',#50429,#50437,#50439,.T.); +#50437 = VERTEX_POINT('',#50438); +#50438 = CARTESIAN_POINT('',(2.2,-0.84,1.025)); +#50439 = CIRCLE('',#50440,0.3); +#50440 = AXIS2_PLACEMENT_3D('',#50441,#50442,#50443); +#50441 = CARTESIAN_POINT('',(2.2,-0.84,0.725)); +#50442 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50443 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50444 = ORIENTED_EDGE('',*,*,#50445,.T.); +#50445 = EDGE_CURVE('',#50437,#46862,#50446,.T.); +#50446 = LINE('',#50447,#50448); +#50447 = CARTESIAN_POINT('',(2.2,-0.84,1.025)); +#50448 = VECTOR('',#50449,1.); +#50449 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50450 = PLANE('',#50451); +#50451 = AXIS2_PLACEMENT_3D('',#50452,#50453,#50454); +#50452 = CARTESIAN_POINT('',(2.410970442936,-0.84,0.528115505988)); +#50453 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50454 = DIRECTION('',(0.,0.,1.)); +#50455 = ADVANCED_FACE('',(#50456),#50472,.F.); +#50456 = FACE_BOUND('',#50457,.F.); +#50457 = EDGE_LOOP('',(#50458,#50464,#50465,#50471)); +#50458 = ORIENTED_EDGE('',*,*,#50459,.F.); +#50459 = EDGE_CURVE('',#46862,#47470,#50460,.T.); +#50460 = LINE('',#50461,#50462); +#50461 = CARTESIAN_POINT('',(2.2,-0.84,1.025)); +#50462 = VECTOR('',#50463,1.); +#50463 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50464 = ORIENTED_EDGE('',*,*,#46878,.T.); +#50465 = ORIENTED_EDGE('',*,*,#50466,.T.); +#50466 = EDGE_CURVE('',#46871,#47478,#50467,.T.); +#50467 = LINE('',#50468,#50469); +#50468 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#50469 = VECTOR('',#50470,1.); +#50470 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50471 = ORIENTED_EDGE('',*,*,#47477,.F.); +#50472 = PLANE('',#50473); +#50473 = AXIS2_PLACEMENT_3D('',#50474,#50475,#50476); +#50474 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#50475 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#50476 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#50477 = ADVANCED_FACE('',(#50478),#50564,.F.); +#50478 = FACE_BOUND('',#50479,.F.); +#50479 = EDGE_LOOP('',(#50480,#50481,#50482,#50491,#50499,#50508,#50516, + #50524,#50532,#50541,#50549,#50558)); +#50480 = ORIENTED_EDGE('',*,*,#46870,.F.); +#50481 = ORIENTED_EDGE('',*,*,#46892,.T.); +#50482 = ORIENTED_EDGE('',*,*,#50483,.T.); +#50483 = EDGE_CURVE('',#46893,#50484,#50486,.T.); +#50484 = VERTEX_POINT('',#50485); +#50485 = CARTESIAN_POINT('',(2.298480775301,-1.7,0.742364817767)); +#50486 = CIRCLE('',#50487,0.1); +#50487 = AXIS2_PLACEMENT_3D('',#50488,#50489,#50490); +#50488 = CARTESIAN_POINT('',(2.2,-1.7,0.725)); +#50489 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50490 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50491 = ORIENTED_EDGE('',*,*,#50492,.T.); +#50492 = EDGE_CURVE('',#50484,#50493,#50495,.T.); +#50493 = VERTEX_POINT('',#50494); +#50494 = CARTESIAN_POINT('',(2.379496640897,-1.7,0.2479055467)); +#50495 = LINE('',#50496,#50497); +#50496 = CARTESIAN_POINT('',(2.298480775301,-1.7,0.742364817767)); +#50497 = VECTOR('',#50498,1.); +#50498 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50499 = ORIENTED_EDGE('',*,*,#50500,.T.); +#50500 = EDGE_CURVE('',#50493,#50501,#50503,.T.); +#50501 = VERTEX_POINT('',#50502); +#50502 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.)); +#50503 = CIRCLE('',#50504,0.3); +#50504 = AXIS2_PLACEMENT_3D('',#50505,#50506,#50507); +#50505 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.3)); +#50506 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50507 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50508 = ORIENTED_EDGE('',*,*,#50509,.T.); +#50509 = EDGE_CURVE('',#50501,#50510,#50512,.T.); +#50510 = VERTEX_POINT('',#50511); +#50511 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#50512 = LINE('',#50513,#50514); +#50513 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.)); +#50514 = VECTOR('',#50515,1.); +#50515 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50516 = ORIENTED_EDGE('',*,*,#50517,.T.); +#50517 = EDGE_CURVE('',#50510,#50518,#50520,.T.); +#50518 = VERTEX_POINT('',#50519); +#50519 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#50520 = LINE('',#50521,#50522); +#50521 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#50522 = VECTOR('',#50523,1.); +#50523 = DIRECTION('',(0.,0.,1.)); +#50524 = ORIENTED_EDGE('',*,*,#50525,.T.); +#50525 = EDGE_CURVE('',#50518,#50526,#50528,.T.); +#50526 = VERTEX_POINT('',#50527); +#50527 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.2)); +#50528 = LINE('',#50529,#50530); +#50529 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#50530 = VECTOR('',#50531,1.); +#50531 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50532 = ORIENTED_EDGE('',*,*,#50533,.T.); +#50533 = EDGE_CURVE('',#50526,#50534,#50536,.T.); +#50534 = VERTEX_POINT('',#50535); +#50535 = CARTESIAN_POINT('',(2.5764581915,-1.7,0.282635182233)); +#50536 = CIRCLE('',#50537,0.1); +#50537 = AXIS2_PLACEMENT_3D('',#50538,#50539,#50540); +#50538 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.3)); +#50539 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50540 = DIRECTION('',(0.,0.,-1.)); +#50541 = ORIENTED_EDGE('',*,*,#50542,.T.); +#50542 = EDGE_CURVE('',#50534,#50543,#50545,.T.); +#50543 = VERTEX_POINT('',#50544); +#50544 = CARTESIAN_POINT('',(2.495442325904,-1.7,0.7770944533)); +#50545 = LINE('',#50546,#50547); +#50546 = CARTESIAN_POINT('',(2.5764581915,-1.7,0.282635182233)); +#50547 = VECTOR('',#50548,1.); +#50548 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50549 = ORIENTED_EDGE('',*,*,#50550,.T.); +#50550 = EDGE_CURVE('',#50543,#50551,#50553,.T.); +#50551 = VERTEX_POINT('',#50552); +#50552 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#50553 = CIRCLE('',#50554,0.3); +#50554 = AXIS2_PLACEMENT_3D('',#50555,#50556,#50557); +#50555 = CARTESIAN_POINT('',(2.2,-1.7,0.725)); +#50556 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50557 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50558 = ORIENTED_EDGE('',*,*,#50559,.T.); +#50559 = EDGE_CURVE('',#50551,#46871,#50560,.T.); +#50560 = LINE('',#50561,#50562); +#50561 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#50562 = VECTOR('',#50563,1.); +#50563 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50564 = PLANE('',#50565); +#50565 = AXIS2_PLACEMENT_3D('',#50566,#50567,#50568); +#50566 = CARTESIAN_POINT('',(2.410970442936,-1.7,0.528115505988)); +#50567 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50568 = DIRECTION('',(0.,0.,1.)); +#50569 = ADVANCED_FACE('',(#50570),#50589,.F.); +#50570 = FACE_BOUND('',#50571,.F.); +#50571 = EDGE_LOOP('',(#50572,#50573,#50582,#50588)); +#50572 = ORIENTED_EDGE('',*,*,#46909,.T.); +#50573 = ORIENTED_EDGE('',*,*,#50574,.T.); +#50574 = EDGE_CURVE('',#46902,#50575,#50577,.T.); +#50575 = VERTEX_POINT('',#50576); +#50576 = CARTESIAN_POINT('',(2.298480775301,-2.11,0.742364817767)); +#50577 = CIRCLE('',#50578,0.1); +#50578 = AXIS2_PLACEMENT_3D('',#50579,#50580,#50581); +#50579 = CARTESIAN_POINT('',(2.2,-2.11,0.725)); +#50580 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50581 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50582 = ORIENTED_EDGE('',*,*,#50583,.F.); +#50583 = EDGE_CURVE('',#50484,#50575,#50584,.T.); +#50584 = LINE('',#50585,#50586); +#50585 = CARTESIAN_POINT('',(2.298480775301,-1.7,0.742364817767)); +#50586 = VECTOR('',#50587,1.); +#50587 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50588 = ORIENTED_EDGE('',*,*,#50483,.F.); +#50589 = CYLINDRICAL_SURFACE('',#50590,0.1); +#50590 = AXIS2_PLACEMENT_3D('',#50591,#50592,#50593); +#50591 = CARTESIAN_POINT('',(2.2,-1.7,0.725)); +#50592 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50593 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50594 = ADVANCED_FACE('',(#50595),#50673,.T.); +#50595 = FACE_BOUND('',#50596,.T.); +#50596 = EDGE_LOOP('',(#50597,#50598,#50599,#50600,#50608,#50617,#50625, + #50633,#50641,#50650,#50658,#50667)); +#50597 = ORIENTED_EDGE('',*,*,#46923,.F.); +#50598 = ORIENTED_EDGE('',*,*,#46901,.T.); +#50599 = ORIENTED_EDGE('',*,*,#50574,.T.); +#50600 = ORIENTED_EDGE('',*,*,#50601,.T.); +#50601 = EDGE_CURVE('',#50575,#50602,#50604,.T.); +#50602 = VERTEX_POINT('',#50603); +#50603 = CARTESIAN_POINT('',(2.379496640897,-2.11,0.2479055467)); +#50604 = LINE('',#50605,#50606); +#50605 = CARTESIAN_POINT('',(2.298480775301,-2.11,0.742364817767)); +#50606 = VECTOR('',#50607,1.); +#50607 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50608 = ORIENTED_EDGE('',*,*,#50609,.T.); +#50609 = EDGE_CURVE('',#50602,#50610,#50612,.T.); +#50610 = VERTEX_POINT('',#50611); +#50611 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.)); +#50612 = CIRCLE('',#50613,0.3); +#50613 = AXIS2_PLACEMENT_3D('',#50614,#50615,#50616); +#50614 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.3)); +#50615 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50616 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50617 = ORIENTED_EDGE('',*,*,#50618,.T.); +#50618 = EDGE_CURVE('',#50610,#50619,#50621,.T.); +#50619 = VERTEX_POINT('',#50620); +#50620 = CARTESIAN_POINT('',(3.,-2.11,0.)); +#50621 = LINE('',#50622,#50623); +#50622 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.)); +#50623 = VECTOR('',#50624,1.); +#50624 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50625 = ORIENTED_EDGE('',*,*,#50626,.T.); +#50626 = EDGE_CURVE('',#50619,#50627,#50629,.T.); +#50627 = VERTEX_POINT('',#50628); +#50628 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#50629 = LINE('',#50630,#50631); +#50630 = CARTESIAN_POINT('',(3.,-2.11,0.)); +#50631 = VECTOR('',#50632,1.); +#50632 = DIRECTION('',(0.,0.,1.)); +#50633 = ORIENTED_EDGE('',*,*,#50634,.T.); +#50634 = EDGE_CURVE('',#50627,#50635,#50637,.T.); +#50635 = VERTEX_POINT('',#50636); +#50636 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.2)); +#50637 = LINE('',#50638,#50639); +#50638 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#50639 = VECTOR('',#50640,1.); +#50640 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50641 = ORIENTED_EDGE('',*,*,#50642,.T.); +#50642 = EDGE_CURVE('',#50635,#50643,#50645,.T.); +#50643 = VERTEX_POINT('',#50644); +#50644 = CARTESIAN_POINT('',(2.5764581915,-2.11,0.282635182233)); +#50645 = CIRCLE('',#50646,0.1); +#50646 = AXIS2_PLACEMENT_3D('',#50647,#50648,#50649); +#50647 = CARTESIAN_POINT('',(2.674938966801,-2.11,0.3)); +#50648 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50649 = DIRECTION('',(0.,0.,-1.)); +#50650 = ORIENTED_EDGE('',*,*,#50651,.T.); +#50651 = EDGE_CURVE('',#50643,#50652,#50654,.T.); +#50652 = VERTEX_POINT('',#50653); +#50653 = CARTESIAN_POINT('',(2.495442325904,-2.11,0.7770944533)); +#50654 = LINE('',#50655,#50656); +#50655 = CARTESIAN_POINT('',(2.5764581915,-2.11,0.282635182233)); +#50656 = VECTOR('',#50657,1.); +#50657 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50658 = ORIENTED_EDGE('',*,*,#50659,.T.); +#50659 = EDGE_CURVE('',#50652,#50660,#50662,.T.); +#50660 = VERTEX_POINT('',#50661); +#50661 = CARTESIAN_POINT('',(2.2,-2.11,1.025)); +#50662 = CIRCLE('',#50663,0.3); +#50663 = AXIS2_PLACEMENT_3D('',#50664,#50665,#50666); +#50664 = CARTESIAN_POINT('',(2.2,-2.11,0.725)); +#50665 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50666 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50667 = ORIENTED_EDGE('',*,*,#50668,.T.); +#50668 = EDGE_CURVE('',#50660,#46924,#50669,.T.); +#50669 = LINE('',#50670,#50671); +#50670 = CARTESIAN_POINT('',(2.2,-2.11,1.025)); +#50671 = VECTOR('',#50672,1.); +#50672 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50673 = PLANE('',#50674); +#50674 = AXIS2_PLACEMENT_3D('',#50675,#50676,#50677); +#50675 = CARTESIAN_POINT('',(2.410970442936,-2.11,0.528115505988)); +#50676 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50677 = DIRECTION('',(0.,0.,1.)); +#50678 = ADVANCED_FACE('',(#50679),#50695,.F.); +#50679 = FACE_BOUND('',#50680,.F.); +#50680 = EDGE_LOOP('',(#50681,#50687,#50688,#50694)); +#50681 = ORIENTED_EDGE('',*,*,#50682,.F.); +#50682 = EDGE_CURVE('',#46924,#47486,#50683,.T.); +#50683 = LINE('',#50684,#50685); +#50684 = CARTESIAN_POINT('',(2.2,-2.11,1.025)); +#50685 = VECTOR('',#50686,1.); +#50686 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50687 = ORIENTED_EDGE('',*,*,#46940,.T.); +#50688 = ORIENTED_EDGE('',*,*,#50689,.T.); +#50689 = EDGE_CURVE('',#46933,#47494,#50690,.T.); +#50690 = LINE('',#50691,#50692); +#50691 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#50692 = VECTOR('',#50693,1.); +#50693 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50694 = ORIENTED_EDGE('',*,*,#47493,.F.); +#50695 = PLANE('',#50696); +#50696 = AXIS2_PLACEMENT_3D('',#50697,#50698,#50699); +#50697 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#50698 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#50699 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#50700 = ADVANCED_FACE('',(#50701),#50787,.F.); +#50701 = FACE_BOUND('',#50702,.F.); +#50702 = EDGE_LOOP('',(#50703,#50704,#50705,#50714,#50722,#50731,#50739, + #50747,#50755,#50764,#50772,#50781)); +#50703 = ORIENTED_EDGE('',*,*,#46932,.F.); +#50704 = ORIENTED_EDGE('',*,*,#46954,.T.); +#50705 = ORIENTED_EDGE('',*,*,#50706,.T.); +#50706 = EDGE_CURVE('',#46955,#50707,#50709,.T.); +#50707 = VERTEX_POINT('',#50708); +#50708 = CARTESIAN_POINT('',(2.298480775301,-2.97,0.742364817767)); +#50709 = CIRCLE('',#50710,0.1); +#50710 = AXIS2_PLACEMENT_3D('',#50711,#50712,#50713); +#50711 = CARTESIAN_POINT('',(2.2,-2.97,0.725)); +#50712 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50713 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50714 = ORIENTED_EDGE('',*,*,#50715,.T.); +#50715 = EDGE_CURVE('',#50707,#50716,#50718,.T.); +#50716 = VERTEX_POINT('',#50717); +#50717 = CARTESIAN_POINT('',(2.379496640897,-2.97,0.2479055467)); +#50718 = LINE('',#50719,#50720); +#50719 = CARTESIAN_POINT('',(2.298480775301,-2.97,0.742364817767)); +#50720 = VECTOR('',#50721,1.); +#50721 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50722 = ORIENTED_EDGE('',*,*,#50723,.T.); +#50723 = EDGE_CURVE('',#50716,#50724,#50726,.T.); +#50724 = VERTEX_POINT('',#50725); +#50725 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.)); +#50726 = CIRCLE('',#50727,0.3); +#50727 = AXIS2_PLACEMENT_3D('',#50728,#50729,#50730); +#50728 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.3)); +#50729 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50730 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50731 = ORIENTED_EDGE('',*,*,#50732,.T.); +#50732 = EDGE_CURVE('',#50724,#50733,#50735,.T.); +#50733 = VERTEX_POINT('',#50734); +#50734 = CARTESIAN_POINT('',(3.,-2.97,0.)); +#50735 = LINE('',#50736,#50737); +#50736 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.)); +#50737 = VECTOR('',#50738,1.); +#50738 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50739 = ORIENTED_EDGE('',*,*,#50740,.T.); +#50740 = EDGE_CURVE('',#50733,#50741,#50743,.T.); +#50741 = VERTEX_POINT('',#50742); +#50742 = CARTESIAN_POINT('',(3.,-2.97,0.2)); +#50743 = LINE('',#50744,#50745); +#50744 = CARTESIAN_POINT('',(3.,-2.97,0.)); +#50745 = VECTOR('',#50746,1.); +#50746 = DIRECTION('',(0.,0.,1.)); +#50747 = ORIENTED_EDGE('',*,*,#50748,.T.); +#50748 = EDGE_CURVE('',#50741,#50749,#50751,.T.); +#50749 = VERTEX_POINT('',#50750); +#50750 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.2)); +#50751 = LINE('',#50752,#50753); +#50752 = CARTESIAN_POINT('',(3.,-2.97,0.2)); +#50753 = VECTOR('',#50754,1.); +#50754 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50755 = ORIENTED_EDGE('',*,*,#50756,.T.); +#50756 = EDGE_CURVE('',#50749,#50757,#50759,.T.); +#50757 = VERTEX_POINT('',#50758); +#50758 = CARTESIAN_POINT('',(2.5764581915,-2.97,0.282635182233)); +#50759 = CIRCLE('',#50760,0.1); +#50760 = AXIS2_PLACEMENT_3D('',#50761,#50762,#50763); +#50761 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.3)); +#50762 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50763 = DIRECTION('',(0.,0.,-1.)); +#50764 = ORIENTED_EDGE('',*,*,#50765,.T.); +#50765 = EDGE_CURVE('',#50757,#50766,#50768,.T.); +#50766 = VERTEX_POINT('',#50767); +#50767 = CARTESIAN_POINT('',(2.495442325904,-2.97,0.7770944533)); +#50768 = LINE('',#50769,#50770); +#50769 = CARTESIAN_POINT('',(2.5764581915,-2.97,0.282635182233)); +#50770 = VECTOR('',#50771,1.); +#50771 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50772 = ORIENTED_EDGE('',*,*,#50773,.T.); +#50773 = EDGE_CURVE('',#50766,#50774,#50776,.T.); +#50774 = VERTEX_POINT('',#50775); +#50775 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#50776 = CIRCLE('',#50777,0.3); +#50777 = AXIS2_PLACEMENT_3D('',#50778,#50779,#50780); +#50778 = CARTESIAN_POINT('',(2.2,-2.97,0.725)); +#50779 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50780 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50781 = ORIENTED_EDGE('',*,*,#50782,.T.); +#50782 = EDGE_CURVE('',#50774,#46933,#50783,.T.); +#50783 = LINE('',#50784,#50785); +#50784 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#50785 = VECTOR('',#50786,1.); +#50786 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50787 = PLANE('',#50788); +#50788 = AXIS2_PLACEMENT_3D('',#50789,#50790,#50791); +#50789 = CARTESIAN_POINT('',(2.410970442936,-2.97,0.528115505988)); +#50790 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50791 = DIRECTION('',(0.,0.,1.)); +#50792 = ADVANCED_FACE('',(#50793),#50812,.F.); +#50793 = FACE_BOUND('',#50794,.F.); +#50794 = EDGE_LOOP('',(#50795,#50796,#50805,#50811)); +#50795 = ORIENTED_EDGE('',*,*,#46971,.T.); +#50796 = ORIENTED_EDGE('',*,*,#50797,.T.); +#50797 = EDGE_CURVE('',#46964,#50798,#50800,.T.); +#50798 = VERTEX_POINT('',#50799); +#50799 = CARTESIAN_POINT('',(2.298480775301,-3.38,0.742364817767)); +#50800 = CIRCLE('',#50801,0.1); +#50801 = AXIS2_PLACEMENT_3D('',#50802,#50803,#50804); +#50802 = CARTESIAN_POINT('',(2.2,-3.38,0.725)); +#50803 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50804 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50805 = ORIENTED_EDGE('',*,*,#50806,.F.); +#50806 = EDGE_CURVE('',#50707,#50798,#50807,.T.); +#50807 = LINE('',#50808,#50809); +#50808 = CARTESIAN_POINT('',(2.298480775301,-2.97,0.742364817767)); +#50809 = VECTOR('',#50810,1.); +#50810 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50811 = ORIENTED_EDGE('',*,*,#50706,.F.); +#50812 = CYLINDRICAL_SURFACE('',#50813,0.1); +#50813 = AXIS2_PLACEMENT_3D('',#50814,#50815,#50816); +#50814 = CARTESIAN_POINT('',(2.2,-2.97,0.725)); +#50815 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50816 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50817 = ADVANCED_FACE('',(#50818),#50896,.T.); +#50818 = FACE_BOUND('',#50819,.T.); +#50819 = EDGE_LOOP('',(#50820,#50821,#50822,#50823,#50831,#50840,#50848, + #50856,#50864,#50873,#50881,#50890)); +#50820 = ORIENTED_EDGE('',*,*,#46985,.F.); +#50821 = ORIENTED_EDGE('',*,*,#46963,.T.); +#50822 = ORIENTED_EDGE('',*,*,#50797,.T.); +#50823 = ORIENTED_EDGE('',*,*,#50824,.T.); +#50824 = EDGE_CURVE('',#50798,#50825,#50827,.T.); +#50825 = VERTEX_POINT('',#50826); +#50826 = CARTESIAN_POINT('',(2.379496640897,-3.38,0.2479055467)); +#50827 = LINE('',#50828,#50829); +#50828 = CARTESIAN_POINT('',(2.298480775301,-3.38,0.742364817767)); +#50829 = VECTOR('',#50830,1.); +#50830 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50831 = ORIENTED_EDGE('',*,*,#50832,.T.); +#50832 = EDGE_CURVE('',#50825,#50833,#50835,.T.); +#50833 = VERTEX_POINT('',#50834); +#50834 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.)); +#50835 = CIRCLE('',#50836,0.3); +#50836 = AXIS2_PLACEMENT_3D('',#50837,#50838,#50839); +#50837 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.3)); +#50838 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50839 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50840 = ORIENTED_EDGE('',*,*,#50841,.T.); +#50841 = EDGE_CURVE('',#50833,#50842,#50844,.T.); +#50842 = VERTEX_POINT('',#50843); +#50843 = CARTESIAN_POINT('',(3.,-3.38,0.)); +#50844 = LINE('',#50845,#50846); +#50845 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.)); +#50846 = VECTOR('',#50847,1.); +#50847 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50848 = ORIENTED_EDGE('',*,*,#50849,.T.); +#50849 = EDGE_CURVE('',#50842,#50850,#50852,.T.); +#50850 = VERTEX_POINT('',#50851); +#50851 = CARTESIAN_POINT('',(3.,-3.38,0.2)); +#50852 = LINE('',#50853,#50854); +#50853 = CARTESIAN_POINT('',(3.,-3.38,0.)); +#50854 = VECTOR('',#50855,1.); +#50855 = DIRECTION('',(0.,0.,1.)); +#50856 = ORIENTED_EDGE('',*,*,#50857,.T.); +#50857 = EDGE_CURVE('',#50850,#50858,#50860,.T.); +#50858 = VERTEX_POINT('',#50859); +#50859 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.2)); +#50860 = LINE('',#50861,#50862); +#50861 = CARTESIAN_POINT('',(3.,-3.38,0.2)); +#50862 = VECTOR('',#50863,1.); +#50863 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50864 = ORIENTED_EDGE('',*,*,#50865,.T.); +#50865 = EDGE_CURVE('',#50858,#50866,#50868,.T.); +#50866 = VERTEX_POINT('',#50867); +#50867 = CARTESIAN_POINT('',(2.5764581915,-3.38,0.282635182233)); +#50868 = CIRCLE('',#50869,0.1); +#50869 = AXIS2_PLACEMENT_3D('',#50870,#50871,#50872); +#50870 = CARTESIAN_POINT('',(2.674938966801,-3.38,0.3)); +#50871 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50872 = DIRECTION('',(0.,0.,-1.)); +#50873 = ORIENTED_EDGE('',*,*,#50874,.T.); +#50874 = EDGE_CURVE('',#50866,#50875,#50877,.T.); +#50875 = VERTEX_POINT('',#50876); +#50876 = CARTESIAN_POINT('',(2.495442325904,-3.38,0.7770944533)); +#50877 = LINE('',#50878,#50879); +#50878 = CARTESIAN_POINT('',(2.5764581915,-3.38,0.282635182233)); +#50879 = VECTOR('',#50880,1.); +#50880 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50881 = ORIENTED_EDGE('',*,*,#50882,.T.); +#50882 = EDGE_CURVE('',#50875,#50883,#50885,.T.); +#50883 = VERTEX_POINT('',#50884); +#50884 = CARTESIAN_POINT('',(2.2,-3.38,1.025)); +#50885 = CIRCLE('',#50886,0.3); +#50886 = AXIS2_PLACEMENT_3D('',#50887,#50888,#50889); +#50887 = CARTESIAN_POINT('',(2.2,-3.38,0.725)); +#50888 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50889 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#50890 = ORIENTED_EDGE('',*,*,#50891,.T.); +#50891 = EDGE_CURVE('',#50883,#46986,#50892,.T.); +#50892 = LINE('',#50893,#50894); +#50893 = CARTESIAN_POINT('',(2.2,-3.38,1.025)); +#50894 = VECTOR('',#50895,1.); +#50895 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50896 = PLANE('',#50897); +#50897 = AXIS2_PLACEMENT_3D('',#50898,#50899,#50900); +#50898 = CARTESIAN_POINT('',(2.410970442936,-3.38,0.528115505988)); +#50899 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50900 = DIRECTION('',(0.,0.,1.)); +#50901 = ADVANCED_FACE('',(#50902),#50918,.F.); +#50902 = FACE_BOUND('',#50903,.F.); +#50903 = EDGE_LOOP('',(#50904,#50910,#50911,#50917)); +#50904 = ORIENTED_EDGE('',*,*,#50905,.F.); +#50905 = EDGE_CURVE('',#46986,#47502,#50906,.T.); +#50906 = LINE('',#50907,#50908); +#50907 = CARTESIAN_POINT('',(2.2,-3.38,1.025)); +#50908 = VECTOR('',#50909,1.); +#50909 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50910 = ORIENTED_EDGE('',*,*,#47002,.T.); +#50911 = ORIENTED_EDGE('',*,*,#50912,.T.); +#50912 = EDGE_CURVE('',#46995,#47510,#50913,.T.); +#50913 = LINE('',#50914,#50915); +#50914 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#50915 = VECTOR('',#50916,1.); +#50916 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50917 = ORIENTED_EDGE('',*,*,#47509,.F.); +#50918 = PLANE('',#50919); +#50919 = AXIS2_PLACEMENT_3D('',#50920,#50921,#50922); +#50920 = CARTESIAN_POINT('',(-5.802635690585E-16,4.9125,1.025)); +#50921 = DIRECTION('',(2.007919022431E-31,-9.466330862652E-27,-1.)); +#50922 = DIRECTION('',(1.,1.11487299784E-16,2.00791902242E-31)); +#50923 = ADVANCED_FACE('',(#50924),#51010,.F.); +#50924 = FACE_BOUND('',#50925,.F.); +#50925 = EDGE_LOOP('',(#50926,#50927,#50928,#50937,#50945,#50954,#50962, + #50970,#50978,#50987,#50995,#51004)); +#50926 = ORIENTED_EDGE('',*,*,#46994,.F.); +#50927 = ORIENTED_EDGE('',*,*,#47016,.T.); +#50928 = ORIENTED_EDGE('',*,*,#50929,.T.); +#50929 = EDGE_CURVE('',#47017,#50930,#50932,.T.); +#50930 = VERTEX_POINT('',#50931); +#50931 = CARTESIAN_POINT('',(2.298480775301,-4.24,0.742364817767)); +#50932 = CIRCLE('',#50933,0.1); +#50933 = AXIS2_PLACEMENT_3D('',#50934,#50935,#50936); +#50934 = CARTESIAN_POINT('',(2.2,-4.24,0.725)); +#50935 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50936 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#50937 = ORIENTED_EDGE('',*,*,#50938,.T.); +#50938 = EDGE_CURVE('',#50930,#50939,#50941,.T.); +#50939 = VERTEX_POINT('',#50940); +#50940 = CARTESIAN_POINT('',(2.379496640897,-4.24,0.2479055467)); +#50941 = LINE('',#50942,#50943); +#50942 = CARTESIAN_POINT('',(2.298480775301,-4.24,0.742364817767)); +#50943 = VECTOR('',#50944,1.); +#50944 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#50945 = ORIENTED_EDGE('',*,*,#50946,.T.); +#50946 = EDGE_CURVE('',#50939,#50947,#50949,.T.); +#50947 = VERTEX_POINT('',#50948); +#50948 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.)); +#50949 = CIRCLE('',#50950,0.3); +#50950 = AXIS2_PLACEMENT_3D('',#50951,#50952,#50953); +#50951 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.3)); +#50952 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#50953 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#50954 = ORIENTED_EDGE('',*,*,#50955,.T.); +#50955 = EDGE_CURVE('',#50947,#50956,#50958,.T.); +#50956 = VERTEX_POINT('',#50957); +#50957 = CARTESIAN_POINT('',(3.,-4.24,0.)); +#50958 = LINE('',#50959,#50960); +#50959 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.)); +#50960 = VECTOR('',#50961,1.); +#50961 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#50962 = ORIENTED_EDGE('',*,*,#50963,.T.); +#50963 = EDGE_CURVE('',#50956,#50964,#50966,.T.); +#50964 = VERTEX_POINT('',#50965); +#50965 = CARTESIAN_POINT('',(3.,-4.24,0.2)); +#50966 = LINE('',#50967,#50968); +#50967 = CARTESIAN_POINT('',(3.,-4.24,0.)); +#50968 = VECTOR('',#50969,1.); +#50969 = DIRECTION('',(0.,0.,1.)); +#50970 = ORIENTED_EDGE('',*,*,#50971,.T.); +#50971 = EDGE_CURVE('',#50964,#50972,#50974,.T.); +#50972 = VERTEX_POINT('',#50973); +#50973 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.2)); +#50974 = LINE('',#50975,#50976); +#50975 = CARTESIAN_POINT('',(3.,-4.24,0.2)); +#50976 = VECTOR('',#50977,1.); +#50977 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#50978 = ORIENTED_EDGE('',*,*,#50979,.T.); +#50979 = EDGE_CURVE('',#50972,#50980,#50982,.T.); +#50980 = VERTEX_POINT('',#50981); +#50981 = CARTESIAN_POINT('',(2.5764581915,-4.24,0.282635182233)); +#50982 = CIRCLE('',#50983,0.1); +#50983 = AXIS2_PLACEMENT_3D('',#50984,#50985,#50986); +#50984 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.3)); +#50985 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#50986 = DIRECTION('',(0.,0.,-1.)); +#50987 = ORIENTED_EDGE('',*,*,#50988,.T.); +#50988 = EDGE_CURVE('',#50980,#50989,#50991,.T.); +#50989 = VERTEX_POINT('',#50990); +#50990 = CARTESIAN_POINT('',(2.495442325904,-4.24,0.7770944533)); +#50991 = LINE('',#50992,#50993); +#50992 = CARTESIAN_POINT('',(2.5764581915,-4.24,0.282635182233)); +#50993 = VECTOR('',#50994,1.); +#50994 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#50995 = ORIENTED_EDGE('',*,*,#50996,.T.); +#50996 = EDGE_CURVE('',#50989,#50997,#50999,.T.); +#50997 = VERTEX_POINT('',#50998); +#50998 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#50999 = CIRCLE('',#51000,0.3); +#51000 = AXIS2_PLACEMENT_3D('',#51001,#51002,#51003); +#51001 = CARTESIAN_POINT('',(2.2,-4.24,0.725)); +#51002 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51003 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51004 = ORIENTED_EDGE('',*,*,#51005,.T.); +#51005 = EDGE_CURVE('',#50997,#46995,#51006,.T.); +#51006 = LINE('',#51007,#51008); +#51007 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#51008 = VECTOR('',#51009,1.); +#51009 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51010 = PLANE('',#51011); +#51011 = AXIS2_PLACEMENT_3D('',#51012,#51013,#51014); +#51012 = CARTESIAN_POINT('',(2.410970442936,-4.24,0.528115505988)); +#51013 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51014 = DIRECTION('',(0.,0.,1.)); +#51015 = ADVANCED_FACE('',(#51016),#51035,.F.); +#51016 = FACE_BOUND('',#51017,.F.); +#51017 = EDGE_LOOP('',(#51018,#51019,#51028,#51034)); +#51018 = ORIENTED_EDGE('',*,*,#47033,.T.); +#51019 = ORIENTED_EDGE('',*,*,#51020,.T.); +#51020 = EDGE_CURVE('',#47026,#51021,#51023,.T.); +#51021 = VERTEX_POINT('',#51022); +#51022 = CARTESIAN_POINT('',(2.298480775301,-4.65,0.742364817767)); +#51023 = CIRCLE('',#51024,0.1); +#51024 = AXIS2_PLACEMENT_3D('',#51025,#51026,#51027); +#51025 = CARTESIAN_POINT('',(2.2,-4.65,0.725)); +#51026 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51027 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#51028 = ORIENTED_EDGE('',*,*,#51029,.F.); +#51029 = EDGE_CURVE('',#50930,#51021,#51030,.T.); +#51030 = LINE('',#51031,#51032); +#51031 = CARTESIAN_POINT('',(2.298480775301,-4.24,0.742364817767)); +#51032 = VECTOR('',#51033,1.); +#51033 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51034 = ORIENTED_EDGE('',*,*,#50929,.F.); +#51035 = CYLINDRICAL_SURFACE('',#51036,0.1); +#51036 = AXIS2_PLACEMENT_3D('',#51037,#51038,#51039); +#51037 = CARTESIAN_POINT('',(2.2,-4.24,0.725)); +#51038 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51039 = DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.)); +#51040 = ADVANCED_FACE('',(#51041),#51119,.T.); +#51041 = FACE_BOUND('',#51042,.T.); +#51042 = EDGE_LOOP('',(#51043,#51044,#51045,#51046,#51054,#51063,#51071, + #51079,#51087,#51096,#51104,#51113)); +#51043 = ORIENTED_EDGE('',*,*,#47047,.F.); +#51044 = ORIENTED_EDGE('',*,*,#47025,.T.); +#51045 = ORIENTED_EDGE('',*,*,#51020,.T.); +#51046 = ORIENTED_EDGE('',*,*,#51047,.T.); +#51047 = EDGE_CURVE('',#51021,#51048,#51050,.T.); +#51048 = VERTEX_POINT('',#51049); +#51049 = CARTESIAN_POINT('',(2.379496640897,-4.65,0.2479055467)); +#51050 = LINE('',#51051,#51052); +#51051 = CARTESIAN_POINT('',(2.298480775301,-4.65,0.742364817767)); +#51052 = VECTOR('',#51053,1.); +#51053 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#51054 = ORIENTED_EDGE('',*,*,#51055,.T.); +#51055 = EDGE_CURVE('',#51048,#51056,#51058,.T.); +#51056 = VERTEX_POINT('',#51057); +#51057 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.)); +#51058 = CIRCLE('',#51059,0.3); +#51059 = AXIS2_PLACEMENT_3D('',#51060,#51061,#51062); +#51060 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.3)); +#51061 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51062 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#51063 = ORIENTED_EDGE('',*,*,#51064,.T.); +#51064 = EDGE_CURVE('',#51056,#51065,#51067,.T.); +#51065 = VERTEX_POINT('',#51066); +#51066 = CARTESIAN_POINT('',(3.,-4.65,0.)); +#51067 = LINE('',#51068,#51069); +#51068 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.)); +#51069 = VECTOR('',#51070,1.); +#51070 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#51071 = ORIENTED_EDGE('',*,*,#51072,.T.); +#51072 = EDGE_CURVE('',#51065,#51073,#51075,.T.); +#51073 = VERTEX_POINT('',#51074); +#51074 = CARTESIAN_POINT('',(3.,-4.65,0.2)); +#51075 = LINE('',#51076,#51077); +#51076 = CARTESIAN_POINT('',(3.,-4.65,0.)); +#51077 = VECTOR('',#51078,1.); +#51078 = DIRECTION('',(0.,0.,1.)); +#51079 = ORIENTED_EDGE('',*,*,#51080,.T.); +#51080 = EDGE_CURVE('',#51073,#51081,#51083,.T.); +#51081 = VERTEX_POINT('',#51082); +#51082 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.2)); +#51083 = LINE('',#51084,#51085); +#51084 = CARTESIAN_POINT('',(3.,-4.65,0.2)); +#51085 = VECTOR('',#51086,1.); +#51086 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51087 = ORIENTED_EDGE('',*,*,#51088,.T.); +#51088 = EDGE_CURVE('',#51081,#51089,#51091,.T.); +#51089 = VERTEX_POINT('',#51090); +#51090 = CARTESIAN_POINT('',(2.5764581915,-4.65,0.282635182233)); +#51091 = CIRCLE('',#51092,0.1); +#51092 = AXIS2_PLACEMENT_3D('',#51093,#51094,#51095); +#51093 = CARTESIAN_POINT('',(2.674938966801,-4.65,0.3)); +#51094 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51095 = DIRECTION('',(0.,0.,-1.)); +#51096 = ORIENTED_EDGE('',*,*,#51097,.T.); +#51097 = EDGE_CURVE('',#51089,#51098,#51100,.T.); +#51098 = VERTEX_POINT('',#51099); +#51099 = CARTESIAN_POINT('',(2.495442325904,-4.65,0.7770944533)); +#51100 = LINE('',#51101,#51102); +#51101 = CARTESIAN_POINT('',(2.5764581915,-4.65,0.282635182233)); +#51102 = VECTOR('',#51103,1.); +#51103 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#51104 = ORIENTED_EDGE('',*,*,#51105,.T.); +#51105 = EDGE_CURVE('',#51098,#51106,#51108,.T.); +#51106 = VERTEX_POINT('',#51107); +#51107 = CARTESIAN_POINT('',(2.2,-4.65,1.025)); +#51108 = CIRCLE('',#51109,0.3); +#51109 = AXIS2_PLACEMENT_3D('',#51110,#51111,#51112); +#51110 = CARTESIAN_POINT('',(2.2,-4.65,0.725)); +#51111 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51112 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51113 = ORIENTED_EDGE('',*,*,#51114,.T.); +#51114 = EDGE_CURVE('',#51106,#47048,#51115,.T.); +#51115 = LINE('',#51116,#51117); +#51116 = CARTESIAN_POINT('',(2.2,-4.65,1.025)); +#51117 = VECTOR('',#51118,1.); +#51118 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51119 = PLANE('',#51120); +#51120 = AXIS2_PLACEMENT_3D('',#51121,#51122,#51123); +#51121 = CARTESIAN_POINT('',(2.410970442936,-4.65,0.528115505988)); +#51122 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51123 = DIRECTION('',(0.,0.,1.)); +#51124 = ADVANCED_FACE('',(#51125),#51136,.T.); +#51125 = FACE_BOUND('',#51126,.T.); +#51126 = EDGE_LOOP('',(#51127,#51128,#51129,#51130)); +#51127 = ORIENTED_EDGE('',*,*,#49267,.T.); +#51128 = ORIENTED_EDGE('',*,*,#47148,.T.); +#51129 = ORIENTED_EDGE('',*,*,#49369,.F.); +#51130 = ORIENTED_EDGE('',*,*,#51131,.F.); +#51131 = EDGE_CURVE('',#49260,#49362,#51132,.T.); +#51132 = LINE('',#51133,#51134); +#51133 = CARTESIAN_POINT('',(-2.495442325904,4.24,0.7770944533)); +#51134 = VECTOR('',#51135,1.); +#51135 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51136 = CYLINDRICAL_SURFACE('',#51137,0.3); +#51137 = AXIS2_PLACEMENT_3D('',#51138,#51139,#51140); +#51138 = CARTESIAN_POINT('',(-2.2,4.24,0.725)); +#51139 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51140 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#51141 = ADVANCED_FACE('',(#51142),#51155,.F.); +#51142 = FACE_BOUND('',#51143,.F.); +#51143 = EDGE_LOOP('',(#51144,#51145,#51151,#51152,#51153,#51154)); +#51144 = ORIENTED_EDGE('',*,*,#47720,.F.); +#51145 = ORIENTED_EDGE('',*,*,#51146,.T.); +#51146 = EDGE_CURVE('',#47712,#47821,#51147,.T.); +#51147 = LINE('',#51148,#51149); +#51148 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#51149 = VECTOR('',#51150,1.); +#51150 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51151 = ORIENTED_EDGE('',*,*,#47829,.T.); +#51152 = ORIENTED_EDGE('',*,*,#47851,.T.); +#51153 = ORIENTED_EDGE('',*,*,#47195,.F.); +#51154 = ORIENTED_EDGE('',*,*,#47594,.F.); +#51155 = PLANE('',#51156); +#51156 = AXIS2_PLACEMENT_3D('',#51157,#51158,#51159); +#51157 = CARTESIAN_POINT('',(-2.2,-4.65,1.025)); +#51158 = DIRECTION('',(0.,0.,-1.)); +#51159 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51160 = ADVANCED_FACE('',(#51161),#51174,.F.); +#51161 = FACE_BOUND('',#51162,.F.); +#51162 = EDGE_LOOP('',(#51163,#51164,#51170,#51171,#51172,#51173)); +#51163 = ORIENTED_EDGE('',*,*,#47943,.F.); +#51164 = ORIENTED_EDGE('',*,*,#51165,.T.); +#51165 = EDGE_CURVE('',#47935,#48044,#51166,.T.); +#51166 = LINE('',#51167,#51168); +#51167 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#51168 = VECTOR('',#51169,1.); +#51169 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51170 = ORIENTED_EDGE('',*,*,#48052,.T.); +#51171 = ORIENTED_EDGE('',*,*,#48074,.T.); +#51172 = ORIENTED_EDGE('',*,*,#47211,.F.); +#51173 = ORIENTED_EDGE('',*,*,#47844,.F.); +#51174 = PLANE('',#51175); +#51175 = AXIS2_PLACEMENT_3D('',#51176,#51177,#51178); +#51176 = CARTESIAN_POINT('',(-2.2,-3.38,1.025)); +#51177 = DIRECTION('',(0.,0.,-1.)); +#51178 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51179 = ADVANCED_FACE('',(#51180),#51193,.F.); +#51180 = FACE_BOUND('',#51181,.F.); +#51181 = EDGE_LOOP('',(#51182,#51183,#51189,#51190,#51191,#51192)); +#51182 = ORIENTED_EDGE('',*,*,#48166,.F.); +#51183 = ORIENTED_EDGE('',*,*,#51184,.T.); +#51184 = EDGE_CURVE('',#48158,#48267,#51185,.T.); +#51185 = LINE('',#51186,#51187); +#51186 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#51187 = VECTOR('',#51188,1.); +#51188 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51189 = ORIENTED_EDGE('',*,*,#48275,.T.); +#51190 = ORIENTED_EDGE('',*,*,#48297,.T.); +#51191 = ORIENTED_EDGE('',*,*,#47227,.F.); +#51192 = ORIENTED_EDGE('',*,*,#48067,.F.); +#51193 = PLANE('',#51194); +#51194 = AXIS2_PLACEMENT_3D('',#51195,#51196,#51197); +#51195 = CARTESIAN_POINT('',(-2.2,-2.11,1.025)); +#51196 = DIRECTION('',(0.,0.,-1.)); +#51197 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51198 = ADVANCED_FACE('',(#51199),#51212,.F.); +#51199 = FACE_BOUND('',#51200,.F.); +#51200 = EDGE_LOOP('',(#51201,#51202,#51208,#51209,#51210,#51211)); +#51201 = ORIENTED_EDGE('',*,*,#48389,.F.); +#51202 = ORIENTED_EDGE('',*,*,#51203,.T.); +#51203 = EDGE_CURVE('',#48381,#48490,#51204,.T.); +#51204 = LINE('',#51205,#51206); +#51205 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#51206 = VECTOR('',#51207,1.); +#51207 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51208 = ORIENTED_EDGE('',*,*,#48498,.T.); +#51209 = ORIENTED_EDGE('',*,*,#48520,.T.); +#51210 = ORIENTED_EDGE('',*,*,#47243,.F.); +#51211 = ORIENTED_EDGE('',*,*,#48290,.F.); +#51212 = PLANE('',#51213); +#51213 = AXIS2_PLACEMENT_3D('',#51214,#51215,#51216); +#51214 = CARTESIAN_POINT('',(-2.2,-0.84,1.025)); +#51215 = DIRECTION('',(0.,0.,-1.)); +#51216 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51217 = ADVANCED_FACE('',(#51218),#51231,.F.); +#51218 = FACE_BOUND('',#51219,.F.); +#51219 = EDGE_LOOP('',(#51220,#51221,#51227,#51228,#51229,#51230)); +#51220 = ORIENTED_EDGE('',*,*,#48612,.F.); +#51221 = ORIENTED_EDGE('',*,*,#51222,.T.); +#51222 = EDGE_CURVE('',#48604,#48713,#51223,.T.); +#51223 = LINE('',#51224,#51225); +#51224 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#51225 = VECTOR('',#51226,1.); +#51226 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51227 = ORIENTED_EDGE('',*,*,#48721,.T.); +#51228 = ORIENTED_EDGE('',*,*,#48743,.T.); +#51229 = ORIENTED_EDGE('',*,*,#47259,.F.); +#51230 = ORIENTED_EDGE('',*,*,#48513,.F.); +#51231 = PLANE('',#51232); +#51232 = AXIS2_PLACEMENT_3D('',#51233,#51234,#51235); +#51233 = CARTESIAN_POINT('',(-2.2,0.43,1.025)); +#51234 = DIRECTION('',(0.,0.,-1.)); +#51235 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51236 = ADVANCED_FACE('',(#51237),#51250,.F.); +#51237 = FACE_BOUND('',#51238,.F.); +#51238 = EDGE_LOOP('',(#51239,#51240,#51246,#51247,#51248,#51249)); +#51239 = ORIENTED_EDGE('',*,*,#48835,.F.); +#51240 = ORIENTED_EDGE('',*,*,#51241,.T.); +#51241 = EDGE_CURVE('',#48827,#48936,#51242,.T.); +#51242 = LINE('',#51243,#51244); +#51243 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#51244 = VECTOR('',#51245,1.); +#51245 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51246 = ORIENTED_EDGE('',*,*,#48944,.T.); +#51247 = ORIENTED_EDGE('',*,*,#48966,.T.); +#51248 = ORIENTED_EDGE('',*,*,#47275,.F.); +#51249 = ORIENTED_EDGE('',*,*,#48736,.F.); +#51250 = PLANE('',#51251); +#51251 = AXIS2_PLACEMENT_3D('',#51252,#51253,#51254); +#51252 = CARTESIAN_POINT('',(-2.2,1.7,1.025)); +#51253 = DIRECTION('',(0.,0.,-1.)); +#51254 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51255 = ADVANCED_FACE('',(#51256),#51269,.F.); +#51256 = FACE_BOUND('',#51257,.F.); +#51257 = EDGE_LOOP('',(#51258,#51259,#51265,#51266,#51267,#51268)); +#51258 = ORIENTED_EDGE('',*,*,#49058,.F.); +#51259 = ORIENTED_EDGE('',*,*,#51260,.T.); +#51260 = EDGE_CURVE('',#49050,#49159,#51261,.T.); +#51261 = LINE('',#51262,#51263); +#51262 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#51263 = VECTOR('',#51264,1.); +#51264 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51265 = ORIENTED_EDGE('',*,*,#49167,.T.); +#51266 = ORIENTED_EDGE('',*,*,#49184,.T.); +#51267 = ORIENTED_EDGE('',*,*,#47291,.F.); +#51268 = ORIENTED_EDGE('',*,*,#48959,.F.); +#51269 = PLANE('',#51270); +#51270 = AXIS2_PLACEMENT_3D('',#51271,#51272,#51273); +#51271 = CARTESIAN_POINT('',(-2.2,2.97,1.025)); +#51272 = DIRECTION('',(0.,0.,-1.)); +#51273 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51274 = ADVANCED_FACE('',(#51275,#51304),#51315,.T.); +#51275 = FACE_BOUND('',#51276,.T.); +#51276 = EDGE_LOOP('',(#51277,#51278,#51279,#51280,#51288,#51296,#51302, + #51303)); +#51277 = ORIENTED_EDGE('',*,*,#47366,.F.); +#51278 = ORIENTED_EDGE('',*,*,#47343,.F.); +#51279 = ORIENTED_EDGE('',*,*,#47314,.F.); +#51280 = ORIENTED_EDGE('',*,*,#51281,.F.); +#51281 = EDGE_CURVE('',#51282,#47315,#51284,.T.); +#51282 = VERTEX_POINT('',#51283); +#51283 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#51284 = LINE('',#51285,#51286); +#51285 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#51286 = VECTOR('',#51287,1.); +#51287 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#51288 = ORIENTED_EDGE('',*,*,#51289,.F.); +#51289 = EDGE_CURVE('',#51290,#51282,#51292,.T.); +#51290 = VERTEX_POINT('',#51291); +#51291 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#51292 = LINE('',#51293,#51294); +#51293 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#51294 = VECTOR('',#51295,1.); +#51295 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#51296 = ORIENTED_EDGE('',*,*,#51297,.F.); +#51297 = EDGE_CURVE('',#47534,#51290,#51298,.T.); +#51298 = LINE('',#51299,#51300); +#51299 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#51300 = VECTOR('',#51301,1.); +#51301 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#51302 = ORIENTED_EDGE('',*,*,#47540,.F.); +#51303 = ORIENTED_EDGE('',*,*,#47389,.F.); +#51304 = FACE_BOUND('',#51305,.T.); +#51305 = EDGE_LOOP('',(#51306)); +#51306 = ORIENTED_EDGE('',*,*,#51307,.T.); +#51307 = EDGE_CURVE('',#51308,#51308,#51310,.T.); +#51308 = VERTEX_POINT('',#51309); +#51309 = CARTESIAN_POINT('',(-0.960171280765,3.660171280765,1.75)); +#51310 = CIRCLE('',#51311,0.3); +#51311 = AXIS2_PLACEMENT_3D('',#51312,#51313,#51314); +#51312 = CARTESIAN_POINT('',(-0.960171280765,3.960171280765,1.75)); +#51313 = DIRECTION('',(0.,-0.,-1.)); +#51314 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51315 = PLANE('',#51316); +#51316 = AXIS2_PLACEMENT_3D('',#51317,#51318,#51319); +#51317 = CARTESIAN_POINT('',(-1.680085640382,4.760171280765,1.75)); +#51318 = DIRECTION('',(0.,0.,1.)); +#51319 = DIRECTION('',(0.33282455482,-0.942988767541,0.)); +#51320 = ADVANCED_FACE('',(#51321),#51331,.F.); +#51321 = FACE_BOUND('',#51322,.F.); +#51322 = EDGE_LOOP('',(#51323,#51324,#51325,#51326)); +#51323 = ORIENTED_EDGE('',*,*,#47601,.T.); +#51324 = ORIENTED_EDGE('',*,*,#47322,.T.); +#51325 = ORIENTED_EDGE('',*,*,#51281,.F.); +#51326 = ORIENTED_EDGE('',*,*,#51327,.F.); +#51327 = EDGE_CURVE('',#47602,#51282,#51328,.T.); +#51328 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#51329,#51330),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#51329 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#51330 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#51331 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#51332,#51333) + ,(#51334,#51335 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#51332 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#51333 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#51334 = CARTESIAN_POINT('',(-1.875,-4.7375,1.025)); +#51335 = CARTESIAN_POINT('',(-1.760171280765,-4.680085640382,1.75)); +#51336 = ADVANCED_FACE('',(#51337),#51350,.F.); +#51337 = FACE_BOUND('',#51338,.F.); +#51338 = EDGE_LOOP('',(#51339,#51340,#51346,#51347,#51348,#51349)); +#51339 = ORIENTED_EDGE('',*,*,#49667,.F.); +#51340 = ORIENTED_EDGE('',*,*,#51341,.T.); +#51341 = EDGE_CURVE('',#49659,#49768,#51342,.T.); +#51342 = LINE('',#51343,#51344); +#51343 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#51344 = VECTOR('',#51345,1.); +#51345 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51346 = ORIENTED_EDGE('',*,*,#49776,.T.); +#51347 = ORIENTED_EDGE('',*,*,#49790,.T.); +#51348 = ORIENTED_EDGE('',*,*,#47421,.F.); +#51349 = ORIENTED_EDGE('',*,*,#49574,.F.); +#51350 = PLANE('',#51351); +#51351 = AXIS2_PLACEMENT_3D('',#51352,#51353,#51354); +#51352 = CARTESIAN_POINT('',(2.2,3.38,1.025)); +#51353 = DIRECTION('',(0.,0.,-1.)); +#51354 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51355 = ADVANCED_FACE('',(#51356),#51369,.F.); +#51356 = FACE_BOUND('',#51357,.F.); +#51357 = EDGE_LOOP('',(#51358,#51359,#51365,#51366,#51367,#51368)); +#51358 = ORIENTED_EDGE('',*,*,#49890,.F.); +#51359 = ORIENTED_EDGE('',*,*,#51360,.T.); +#51360 = EDGE_CURVE('',#49882,#49991,#51361,.T.); +#51361 = LINE('',#51362,#51363); +#51362 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#51363 = VECTOR('',#51364,1.); +#51364 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51365 = ORIENTED_EDGE('',*,*,#49999,.T.); +#51366 = ORIENTED_EDGE('',*,*,#50013,.T.); +#51367 = ORIENTED_EDGE('',*,*,#47437,.F.); +#51368 = ORIENTED_EDGE('',*,*,#49797,.F.); +#51369 = PLANE('',#51370); +#51370 = AXIS2_PLACEMENT_3D('',#51371,#51372,#51373); +#51371 = CARTESIAN_POINT('',(2.2,2.11,1.025)); +#51372 = DIRECTION('',(0.,0.,-1.)); +#51373 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51374 = ADVANCED_FACE('',(#51375),#51388,.F.); +#51375 = FACE_BOUND('',#51376,.F.); +#51376 = EDGE_LOOP('',(#51377,#51378,#51384,#51385,#51386,#51387)); +#51377 = ORIENTED_EDGE('',*,*,#50113,.F.); +#51378 = ORIENTED_EDGE('',*,*,#51379,.T.); +#51379 = EDGE_CURVE('',#50105,#50214,#51380,.T.); +#51380 = LINE('',#51381,#51382); +#51381 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#51382 = VECTOR('',#51383,1.); +#51383 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51384 = ORIENTED_EDGE('',*,*,#50222,.T.); +#51385 = ORIENTED_EDGE('',*,*,#50236,.T.); +#51386 = ORIENTED_EDGE('',*,*,#47453,.F.); +#51387 = ORIENTED_EDGE('',*,*,#50020,.F.); +#51388 = PLANE('',#51389); +#51389 = AXIS2_PLACEMENT_3D('',#51390,#51391,#51392); +#51390 = CARTESIAN_POINT('',(2.2,0.84,1.025)); +#51391 = DIRECTION('',(0.,0.,-1.)); +#51392 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51393 = ADVANCED_FACE('',(#51394),#51407,.F.); +#51394 = FACE_BOUND('',#51395,.F.); +#51395 = EDGE_LOOP('',(#51396,#51397,#51403,#51404,#51405,#51406)); +#51396 = ORIENTED_EDGE('',*,*,#50336,.F.); +#51397 = ORIENTED_EDGE('',*,*,#51398,.T.); +#51398 = EDGE_CURVE('',#50328,#50437,#51399,.T.); +#51399 = LINE('',#51400,#51401); +#51400 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#51401 = VECTOR('',#51402,1.); +#51402 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51403 = ORIENTED_EDGE('',*,*,#50445,.T.); +#51404 = ORIENTED_EDGE('',*,*,#50459,.T.); +#51405 = ORIENTED_EDGE('',*,*,#47469,.F.); +#51406 = ORIENTED_EDGE('',*,*,#50243,.F.); +#51407 = PLANE('',#51408); +#51408 = AXIS2_PLACEMENT_3D('',#51409,#51410,#51411); +#51409 = CARTESIAN_POINT('',(2.2,-0.43,1.025)); +#51410 = DIRECTION('',(0.,0.,-1.)); +#51411 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51412 = ADVANCED_FACE('',(#51413),#51426,.F.); +#51413 = FACE_BOUND('',#51414,.F.); +#51414 = EDGE_LOOP('',(#51415,#51416,#51422,#51423,#51424,#51425)); +#51415 = ORIENTED_EDGE('',*,*,#50559,.F.); +#51416 = ORIENTED_EDGE('',*,*,#51417,.T.); +#51417 = EDGE_CURVE('',#50551,#50660,#51418,.T.); +#51418 = LINE('',#51419,#51420); +#51419 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#51420 = VECTOR('',#51421,1.); +#51421 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51422 = ORIENTED_EDGE('',*,*,#50668,.T.); +#51423 = ORIENTED_EDGE('',*,*,#50682,.T.); +#51424 = ORIENTED_EDGE('',*,*,#47485,.F.); +#51425 = ORIENTED_EDGE('',*,*,#50466,.F.); +#51426 = PLANE('',#51427); +#51427 = AXIS2_PLACEMENT_3D('',#51428,#51429,#51430); +#51428 = CARTESIAN_POINT('',(2.2,-1.7,1.025)); +#51429 = DIRECTION('',(0.,0.,-1.)); +#51430 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51431 = ADVANCED_FACE('',(#51432),#51445,.F.); +#51432 = FACE_BOUND('',#51433,.F.); +#51433 = EDGE_LOOP('',(#51434,#51435,#51441,#51442,#51443,#51444)); +#51434 = ORIENTED_EDGE('',*,*,#50782,.F.); +#51435 = ORIENTED_EDGE('',*,*,#51436,.T.); +#51436 = EDGE_CURVE('',#50774,#50883,#51437,.T.); +#51437 = LINE('',#51438,#51439); +#51438 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#51439 = VECTOR('',#51440,1.); +#51440 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51441 = ORIENTED_EDGE('',*,*,#50891,.T.); +#51442 = ORIENTED_EDGE('',*,*,#50905,.T.); +#51443 = ORIENTED_EDGE('',*,*,#47501,.F.); +#51444 = ORIENTED_EDGE('',*,*,#50689,.F.); +#51445 = PLANE('',#51446); +#51446 = AXIS2_PLACEMENT_3D('',#51447,#51448,#51449); +#51447 = CARTESIAN_POINT('',(2.2,-2.97,1.025)); +#51448 = DIRECTION('',(0.,0.,-1.)); +#51449 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51450 = ADVANCED_FACE('',(#51451),#51464,.F.); +#51451 = FACE_BOUND('',#51452,.F.); +#51452 = EDGE_LOOP('',(#51453,#51454,#51460,#51461,#51462,#51463)); +#51453 = ORIENTED_EDGE('',*,*,#51005,.F.); +#51454 = ORIENTED_EDGE('',*,*,#51455,.T.); +#51455 = EDGE_CURVE('',#50997,#51106,#51456,.T.); +#51456 = LINE('',#51457,#51458); +#51457 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#51458 = VECTOR('',#51459,1.); +#51459 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51460 = ORIENTED_EDGE('',*,*,#51114,.T.); +#51461 = ORIENTED_EDGE('',*,*,#47624,.T.); +#51462 = ORIENTED_EDGE('',*,*,#47517,.F.); +#51463 = ORIENTED_EDGE('',*,*,#50912,.F.); +#51464 = PLANE('',#51465); +#51465 = AXIS2_PLACEMENT_3D('',#51466,#51467,#51468); +#51466 = CARTESIAN_POINT('',(2.2,-4.24,1.025)); +#51467 = DIRECTION('',(0.,0.,-1.)); +#51468 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#51469 = ADVANCED_FACE('',(#51470),#51480,.F.); +#51470 = FACE_BOUND('',#51471,.F.); +#51471 = EDGE_LOOP('',(#51472,#51473,#51478,#51479)); +#51472 = ORIENTED_EDGE('',*,*,#47617,.T.); +#51473 = ORIENTED_EDGE('',*,*,#51474,.T.); +#51474 = EDGE_CURVE('',#47610,#51290,#51475,.T.); +#51475 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#51476,#51477),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#51476 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#51477 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#51478 = ORIENTED_EDGE('',*,*,#51297,.F.); +#51479 = ORIENTED_EDGE('',*,*,#47533,.F.); +#51480 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#51481,#51482) + ,(#51483,#51484 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#51481 = CARTESIAN_POINT('',(1.875,-4.7375,1.025)); +#51482 = CARTESIAN_POINT('',(1.760171280765,-4.680085640382,1.75)); +#51483 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#51484 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#51485 = ADVANCED_FACE('',(#51486),#51497,.T.); +#51486 = FACE_BOUND('',#51487,.T.); +#51487 = EDGE_LOOP('',(#51488,#51489,#51490,#51491)); +#51488 = ORIENTED_EDGE('',*,*,#49454,.T.); +#51489 = ORIENTED_EDGE('',*,*,#47563,.T.); +#51490 = ORIENTED_EDGE('',*,*,#49556,.F.); +#51491 = ORIENTED_EDGE('',*,*,#51492,.F.); +#51492 = EDGE_CURVE('',#49447,#49549,#51493,.T.); +#51493 = LINE('',#51494,#51495); +#51494 = CARTESIAN_POINT('',(2.495442325904,4.65,0.7770944533)); +#51495 = VECTOR('',#51496,1.); +#51496 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51497 = CYLINDRICAL_SURFACE('',#51498,0.3); +#51498 = AXIS2_PLACEMENT_3D('',#51499,#51500,#51501); +#51499 = CARTESIAN_POINT('',(2.2,4.65,0.725)); +#51500 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#51501 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#51502 = ADVANCED_FACE('',(#51503),#51509,.F.); +#51503 = FACE_BOUND('',#51504,.F.); +#51504 = EDGE_LOOP('',(#51505,#51506,#51507,#51508)); +#51505 = ORIENTED_EDGE('',*,*,#47609,.T.); +#51506 = ORIENTED_EDGE('',*,*,#51327,.T.); +#51507 = ORIENTED_EDGE('',*,*,#51289,.F.); +#51508 = ORIENTED_EDGE('',*,*,#51474,.F.); +#51509 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#51510,#51511) + ,(#51512,#51513 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#51510 = CARTESIAN_POINT('',(1.7375,-4.875,1.025)); +#51511 = CARTESIAN_POINT('',(1.680085640382,-4.760171280765,1.75)); +#51512 = CARTESIAN_POINT('',(-1.7375,-4.875,1.025)); +#51513 = CARTESIAN_POINT('',(-1.680085640382,-4.760171280765,1.75)); +#51514 = ADVANCED_FACE('',(#51515),#51526,.T.); +#51515 = FACE_BOUND('',#51516,.T.); +#51516 = EDGE_LOOP('',(#51517,#51518,#51519,#51520)); +#51517 = ORIENTED_EDGE('',*,*,#47711,.T.); +#51518 = ORIENTED_EDGE('',*,*,#51146,.T.); +#51519 = ORIENTED_EDGE('',*,*,#47820,.F.); +#51520 = ORIENTED_EDGE('',*,*,#51521,.F.); +#51521 = EDGE_CURVE('',#47704,#47813,#51522,.T.); +#51522 = LINE('',#51523,#51524); +#51523 = CARTESIAN_POINT('',(-2.495442325904,-4.65,0.7770944533)); +#51524 = VECTOR('',#51525,1.); +#51525 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51526 = CYLINDRICAL_SURFACE('',#51527,0.3); +#51527 = AXIS2_PLACEMENT_3D('',#51528,#51529,#51530); +#51528 = CARTESIAN_POINT('',(-2.2,-4.65,0.725)); +#51529 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51530 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#51531 = ADVANCED_FACE('',(#51532),#51543,.F.); +#51532 = FACE_BOUND('',#51533,.F.); +#51533 = EDGE_LOOP('',(#51534,#51540,#51541,#51542)); +#51534 = ORIENTED_EDGE('',*,*,#51535,.T.); +#51535 = EDGE_CURVE('',#47695,#47804,#51536,.T.); +#51536 = LINE('',#51537,#51538); +#51537 = CARTESIAN_POINT('',(-2.5764581915,-4.65,0.282635182233)); +#51538 = VECTOR('',#51539,1.); +#51539 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51540 = ORIENTED_EDGE('',*,*,#47812,.T.); +#51541 = ORIENTED_EDGE('',*,*,#51521,.F.); +#51542 = ORIENTED_EDGE('',*,*,#47703,.F.); +#51543 = PLANE('',#51544); +#51544 = AXIS2_PLACEMENT_3D('',#51545,#51546,#51547); +#51545 = CARTESIAN_POINT('',(-2.5764581915,-4.65,0.282635182233)); +#51546 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#51547 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#51548 = ADVANCED_FACE('',(#51549),#51560,.F.); +#51549 = FACE_BOUND('',#51550,.F.); +#51550 = EDGE_LOOP('',(#51551,#51557,#51558,#51559)); +#51551 = ORIENTED_EDGE('',*,*,#51552,.T.); +#51552 = EDGE_CURVE('',#47687,#47796,#51553,.T.); +#51553 = LINE('',#51554,#51555); +#51554 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.2)); +#51555 = VECTOR('',#51556,1.); +#51556 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51557 = ORIENTED_EDGE('',*,*,#47803,.T.); +#51558 = ORIENTED_EDGE('',*,*,#51535,.F.); +#51559 = ORIENTED_EDGE('',*,*,#47694,.F.); +#51560 = CYLINDRICAL_SURFACE('',#51561,0.1); +#51561 = AXIS2_PLACEMENT_3D('',#51562,#51563,#51564); +#51562 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.3)); +#51563 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51564 = DIRECTION('',(-0.,0.,-1.)); +#51565 = ADVANCED_FACE('',(#51566),#51577,.F.); +#51566 = FACE_BOUND('',#51567,.F.); +#51567 = EDGE_LOOP('',(#51568,#51574,#51575,#51576)); +#51568 = ORIENTED_EDGE('',*,*,#51569,.T.); +#51569 = EDGE_CURVE('',#47679,#47788,#51570,.T.); +#51570 = LINE('',#51571,#51572); +#51571 = CARTESIAN_POINT('',(-3.,-4.65,0.2)); +#51572 = VECTOR('',#51573,1.); +#51573 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51574 = ORIENTED_EDGE('',*,*,#47795,.T.); +#51575 = ORIENTED_EDGE('',*,*,#51552,.F.); +#51576 = ORIENTED_EDGE('',*,*,#47686,.F.); +#51577 = PLANE('',#51578); +#51578 = AXIS2_PLACEMENT_3D('',#51579,#51580,#51581); +#51579 = CARTESIAN_POINT('',(-3.,-4.65,0.2)); +#51580 = DIRECTION('',(0.,0.,-1.)); +#51581 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51582 = ADVANCED_FACE('',(#51583),#51594,.F.); +#51583 = FACE_BOUND('',#51584,.F.); +#51584 = EDGE_LOOP('',(#51585,#51591,#51592,#51593)); +#51585 = ORIENTED_EDGE('',*,*,#51586,.T.); +#51586 = EDGE_CURVE('',#47671,#47780,#51587,.T.); +#51587 = LINE('',#51588,#51589); +#51588 = CARTESIAN_POINT('',(-3.,-4.65,0.)); +#51589 = VECTOR('',#51590,1.); +#51590 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51591 = ORIENTED_EDGE('',*,*,#47787,.T.); +#51592 = ORIENTED_EDGE('',*,*,#51569,.F.); +#51593 = ORIENTED_EDGE('',*,*,#47678,.F.); +#51594 = PLANE('',#51595); +#51595 = AXIS2_PLACEMENT_3D('',#51596,#51597,#51598); +#51596 = CARTESIAN_POINT('',(-3.,-4.65,0.)); +#51597 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51598 = DIRECTION('',(0.,0.,1.)); +#51599 = ADVANCED_FACE('',(#51600),#51611,.F.); +#51600 = FACE_BOUND('',#51601,.F.); +#51601 = EDGE_LOOP('',(#51602,#51608,#51609,#51610)); +#51602 = ORIENTED_EDGE('',*,*,#51603,.T.); +#51603 = EDGE_CURVE('',#47662,#47771,#51604,.T.); +#51604 = LINE('',#51605,#51606); +#51605 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.)); +#51606 = VECTOR('',#51607,1.); +#51607 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51608 = ORIENTED_EDGE('',*,*,#47779,.T.); +#51609 = ORIENTED_EDGE('',*,*,#51586,.F.); +#51610 = ORIENTED_EDGE('',*,*,#47670,.F.); +#51611 = PLANE('',#51612); +#51612 = AXIS2_PLACEMENT_3D('',#51613,#51614,#51615); +#51613 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.)); +#51614 = DIRECTION('',(0.,0.,1.)); +#51615 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#51616 = ADVANCED_FACE('',(#51617),#51628,.T.); +#51617 = FACE_BOUND('',#51618,.T.); +#51618 = EDGE_LOOP('',(#51619,#51620,#51621,#51622)); +#51619 = ORIENTED_EDGE('',*,*,#47661,.T.); +#51620 = ORIENTED_EDGE('',*,*,#51603,.T.); +#51621 = ORIENTED_EDGE('',*,*,#47770,.F.); +#51622 = ORIENTED_EDGE('',*,*,#51623,.F.); +#51623 = EDGE_CURVE('',#47654,#47763,#51624,.T.); +#51624 = LINE('',#51625,#51626); +#51625 = CARTESIAN_POINT('',(-2.379496640897,-4.65,0.2479055467)); +#51626 = VECTOR('',#51627,1.); +#51627 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51628 = CYLINDRICAL_SURFACE('',#51629,0.3); +#51629 = AXIS2_PLACEMENT_3D('',#51630,#51631,#51632); +#51630 = CARTESIAN_POINT('',(-2.674938966801,-4.65,0.3)); +#51631 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51632 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#51633 = ADVANCED_FACE('',(#51634),#51640,.F.); +#51634 = FACE_BOUND('',#51635,.F.); +#51635 = EDGE_LOOP('',(#51636,#51637,#51638,#51639)); +#51636 = ORIENTED_EDGE('',*,*,#47744,.T.); +#51637 = ORIENTED_EDGE('',*,*,#47762,.T.); +#51638 = ORIENTED_EDGE('',*,*,#51623,.F.); +#51639 = ORIENTED_EDGE('',*,*,#47653,.F.); +#51640 = PLANE('',#51641); +#51641 = AXIS2_PLACEMENT_3D('',#51642,#51643,#51644); +#51642 = CARTESIAN_POINT('',(-2.298480775301,-4.65,0.742364817767)); +#51643 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#51644 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#51645 = ADVANCED_FACE('',(#51646),#51657,.T.); +#51646 = FACE_BOUND('',#51647,.T.); +#51647 = EDGE_LOOP('',(#51648,#51649,#51650,#51651)); +#51648 = ORIENTED_EDGE('',*,*,#47934,.T.); +#51649 = ORIENTED_EDGE('',*,*,#51165,.T.); +#51650 = ORIENTED_EDGE('',*,*,#48043,.F.); +#51651 = ORIENTED_EDGE('',*,*,#51652,.F.); +#51652 = EDGE_CURVE('',#47927,#48036,#51653,.T.); +#51653 = LINE('',#51654,#51655); +#51654 = CARTESIAN_POINT('',(-2.495442325904,-3.38,0.7770944533)); +#51655 = VECTOR('',#51656,1.); +#51656 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51657 = CYLINDRICAL_SURFACE('',#51658,0.3); +#51658 = AXIS2_PLACEMENT_3D('',#51659,#51660,#51661); +#51659 = CARTESIAN_POINT('',(-2.2,-3.38,0.725)); +#51660 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51661 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#51662 = ADVANCED_FACE('',(#51663),#51674,.F.); +#51663 = FACE_BOUND('',#51664,.F.); +#51664 = EDGE_LOOP('',(#51665,#51671,#51672,#51673)); +#51665 = ORIENTED_EDGE('',*,*,#51666,.T.); +#51666 = EDGE_CURVE('',#47918,#48027,#51667,.T.); +#51667 = LINE('',#51668,#51669); +#51668 = CARTESIAN_POINT('',(-2.5764581915,-3.38,0.282635182233)); +#51669 = VECTOR('',#51670,1.); +#51670 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51671 = ORIENTED_EDGE('',*,*,#48035,.T.); +#51672 = ORIENTED_EDGE('',*,*,#51652,.F.); +#51673 = ORIENTED_EDGE('',*,*,#47926,.F.); +#51674 = PLANE('',#51675); +#51675 = AXIS2_PLACEMENT_3D('',#51676,#51677,#51678); +#51676 = CARTESIAN_POINT('',(-2.5764581915,-3.38,0.282635182233)); +#51677 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#51678 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#51679 = ADVANCED_FACE('',(#51680),#51691,.F.); +#51680 = FACE_BOUND('',#51681,.F.); +#51681 = EDGE_LOOP('',(#51682,#51688,#51689,#51690)); +#51682 = ORIENTED_EDGE('',*,*,#51683,.T.); +#51683 = EDGE_CURVE('',#47910,#48019,#51684,.T.); +#51684 = LINE('',#51685,#51686); +#51685 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.2)); +#51686 = VECTOR('',#51687,1.); +#51687 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51688 = ORIENTED_EDGE('',*,*,#48026,.T.); +#51689 = ORIENTED_EDGE('',*,*,#51666,.F.); +#51690 = ORIENTED_EDGE('',*,*,#47917,.F.); +#51691 = CYLINDRICAL_SURFACE('',#51692,0.1); +#51692 = AXIS2_PLACEMENT_3D('',#51693,#51694,#51695); +#51693 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.3)); +#51694 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51695 = DIRECTION('',(-0.,0.,-1.)); +#51696 = ADVANCED_FACE('',(#51697),#51708,.F.); +#51697 = FACE_BOUND('',#51698,.F.); +#51698 = EDGE_LOOP('',(#51699,#51705,#51706,#51707)); +#51699 = ORIENTED_EDGE('',*,*,#51700,.T.); +#51700 = EDGE_CURVE('',#47902,#48011,#51701,.T.); +#51701 = LINE('',#51702,#51703); +#51702 = CARTESIAN_POINT('',(-3.,-3.38,0.2)); +#51703 = VECTOR('',#51704,1.); +#51704 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51705 = ORIENTED_EDGE('',*,*,#48018,.T.); +#51706 = ORIENTED_EDGE('',*,*,#51683,.F.); +#51707 = ORIENTED_EDGE('',*,*,#47909,.F.); +#51708 = PLANE('',#51709); +#51709 = AXIS2_PLACEMENT_3D('',#51710,#51711,#51712); +#51710 = CARTESIAN_POINT('',(-3.,-3.38,0.2)); +#51711 = DIRECTION('',(0.,0.,-1.)); +#51712 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51713 = ADVANCED_FACE('',(#51714),#51725,.F.); +#51714 = FACE_BOUND('',#51715,.F.); +#51715 = EDGE_LOOP('',(#51716,#51722,#51723,#51724)); +#51716 = ORIENTED_EDGE('',*,*,#51717,.T.); +#51717 = EDGE_CURVE('',#47894,#48003,#51718,.T.); +#51718 = LINE('',#51719,#51720); +#51719 = CARTESIAN_POINT('',(-3.,-3.38,0.)); +#51720 = VECTOR('',#51721,1.); +#51721 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51722 = ORIENTED_EDGE('',*,*,#48010,.T.); +#51723 = ORIENTED_EDGE('',*,*,#51700,.F.); +#51724 = ORIENTED_EDGE('',*,*,#47901,.F.); +#51725 = PLANE('',#51726); +#51726 = AXIS2_PLACEMENT_3D('',#51727,#51728,#51729); +#51727 = CARTESIAN_POINT('',(-3.,-3.38,0.)); +#51728 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51729 = DIRECTION('',(0.,0.,1.)); +#51730 = ADVANCED_FACE('',(#51731),#51742,.F.); +#51731 = FACE_BOUND('',#51732,.F.); +#51732 = EDGE_LOOP('',(#51733,#51739,#51740,#51741)); +#51733 = ORIENTED_EDGE('',*,*,#51734,.T.); +#51734 = EDGE_CURVE('',#47885,#47994,#51735,.T.); +#51735 = LINE('',#51736,#51737); +#51736 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.)); +#51737 = VECTOR('',#51738,1.); +#51738 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51739 = ORIENTED_EDGE('',*,*,#48002,.T.); +#51740 = ORIENTED_EDGE('',*,*,#51717,.F.); +#51741 = ORIENTED_EDGE('',*,*,#47893,.F.); +#51742 = PLANE('',#51743); +#51743 = AXIS2_PLACEMENT_3D('',#51744,#51745,#51746); +#51744 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.)); +#51745 = DIRECTION('',(0.,0.,1.)); +#51746 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#51747 = ADVANCED_FACE('',(#51748),#51759,.T.); +#51748 = FACE_BOUND('',#51749,.T.); +#51749 = EDGE_LOOP('',(#51750,#51751,#51752,#51753)); +#51750 = ORIENTED_EDGE('',*,*,#47884,.T.); +#51751 = ORIENTED_EDGE('',*,*,#51734,.T.); +#51752 = ORIENTED_EDGE('',*,*,#47993,.F.); +#51753 = ORIENTED_EDGE('',*,*,#51754,.F.); +#51754 = EDGE_CURVE('',#47877,#47986,#51755,.T.); +#51755 = LINE('',#51756,#51757); +#51756 = CARTESIAN_POINT('',(-2.379496640897,-3.38,0.2479055467)); +#51757 = VECTOR('',#51758,1.); +#51758 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51759 = CYLINDRICAL_SURFACE('',#51760,0.3); +#51760 = AXIS2_PLACEMENT_3D('',#51761,#51762,#51763); +#51761 = CARTESIAN_POINT('',(-2.674938966801,-3.38,0.3)); +#51762 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51763 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#51764 = ADVANCED_FACE('',(#51765),#51771,.F.); +#51765 = FACE_BOUND('',#51766,.F.); +#51766 = EDGE_LOOP('',(#51767,#51768,#51769,#51770)); +#51767 = ORIENTED_EDGE('',*,*,#47967,.T.); +#51768 = ORIENTED_EDGE('',*,*,#47985,.T.); +#51769 = ORIENTED_EDGE('',*,*,#51754,.F.); +#51770 = ORIENTED_EDGE('',*,*,#47876,.F.); +#51771 = PLANE('',#51772); +#51772 = AXIS2_PLACEMENT_3D('',#51773,#51774,#51775); +#51773 = CARTESIAN_POINT('',(-2.298480775301,-3.38,0.742364817767)); +#51774 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#51775 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#51776 = ADVANCED_FACE('',(#51777),#51788,.T.); +#51777 = FACE_BOUND('',#51778,.T.); +#51778 = EDGE_LOOP('',(#51779,#51780,#51781,#51782)); +#51779 = ORIENTED_EDGE('',*,*,#48157,.T.); +#51780 = ORIENTED_EDGE('',*,*,#51184,.T.); +#51781 = ORIENTED_EDGE('',*,*,#48266,.F.); +#51782 = ORIENTED_EDGE('',*,*,#51783,.F.); +#51783 = EDGE_CURVE('',#48150,#48259,#51784,.T.); +#51784 = LINE('',#51785,#51786); +#51785 = CARTESIAN_POINT('',(-2.495442325904,-2.11,0.7770944533)); +#51786 = VECTOR('',#51787,1.); +#51787 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51788 = CYLINDRICAL_SURFACE('',#51789,0.3); +#51789 = AXIS2_PLACEMENT_3D('',#51790,#51791,#51792); +#51790 = CARTESIAN_POINT('',(-2.2,-2.11,0.725)); +#51791 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51792 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#51793 = ADVANCED_FACE('',(#51794),#51805,.F.); +#51794 = FACE_BOUND('',#51795,.F.); +#51795 = EDGE_LOOP('',(#51796,#51802,#51803,#51804)); +#51796 = ORIENTED_EDGE('',*,*,#51797,.T.); +#51797 = EDGE_CURVE('',#48141,#48250,#51798,.T.); +#51798 = LINE('',#51799,#51800); +#51799 = CARTESIAN_POINT('',(-2.5764581915,-2.11,0.282635182233)); +#51800 = VECTOR('',#51801,1.); +#51801 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51802 = ORIENTED_EDGE('',*,*,#48258,.T.); +#51803 = ORIENTED_EDGE('',*,*,#51783,.F.); +#51804 = ORIENTED_EDGE('',*,*,#48149,.F.); +#51805 = PLANE('',#51806); +#51806 = AXIS2_PLACEMENT_3D('',#51807,#51808,#51809); +#51807 = CARTESIAN_POINT('',(-2.5764581915,-2.11,0.282635182233)); +#51808 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#51809 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#51810 = ADVANCED_FACE('',(#51811),#51822,.F.); +#51811 = FACE_BOUND('',#51812,.F.); +#51812 = EDGE_LOOP('',(#51813,#51819,#51820,#51821)); +#51813 = ORIENTED_EDGE('',*,*,#51814,.T.); +#51814 = EDGE_CURVE('',#48133,#48242,#51815,.T.); +#51815 = LINE('',#51816,#51817); +#51816 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.2)); +#51817 = VECTOR('',#51818,1.); +#51818 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51819 = ORIENTED_EDGE('',*,*,#48249,.T.); +#51820 = ORIENTED_EDGE('',*,*,#51797,.F.); +#51821 = ORIENTED_EDGE('',*,*,#48140,.F.); +#51822 = CYLINDRICAL_SURFACE('',#51823,0.1); +#51823 = AXIS2_PLACEMENT_3D('',#51824,#51825,#51826); +#51824 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.3)); +#51825 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51826 = DIRECTION('',(-0.,0.,-1.)); +#51827 = ADVANCED_FACE('',(#51828),#51839,.F.); +#51828 = FACE_BOUND('',#51829,.F.); +#51829 = EDGE_LOOP('',(#51830,#51836,#51837,#51838)); +#51830 = ORIENTED_EDGE('',*,*,#51831,.T.); +#51831 = EDGE_CURVE('',#48125,#48234,#51832,.T.); +#51832 = LINE('',#51833,#51834); +#51833 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#51834 = VECTOR('',#51835,1.); +#51835 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51836 = ORIENTED_EDGE('',*,*,#48241,.T.); +#51837 = ORIENTED_EDGE('',*,*,#51814,.F.); +#51838 = ORIENTED_EDGE('',*,*,#48132,.F.); +#51839 = PLANE('',#51840); +#51840 = AXIS2_PLACEMENT_3D('',#51841,#51842,#51843); +#51841 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#51842 = DIRECTION('',(0.,0.,-1.)); +#51843 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51844 = ADVANCED_FACE('',(#51845),#51856,.F.); +#51845 = FACE_BOUND('',#51846,.F.); +#51846 = EDGE_LOOP('',(#51847,#51853,#51854,#51855)); +#51847 = ORIENTED_EDGE('',*,*,#51848,.T.); +#51848 = EDGE_CURVE('',#48117,#48226,#51849,.T.); +#51849 = LINE('',#51850,#51851); +#51850 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#51851 = VECTOR('',#51852,1.); +#51852 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51853 = ORIENTED_EDGE('',*,*,#48233,.T.); +#51854 = ORIENTED_EDGE('',*,*,#51831,.F.); +#51855 = ORIENTED_EDGE('',*,*,#48124,.F.); +#51856 = PLANE('',#51857); +#51857 = AXIS2_PLACEMENT_3D('',#51858,#51859,#51860); +#51858 = CARTESIAN_POINT('',(-3.,-2.11,0.)); +#51859 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51860 = DIRECTION('',(0.,0.,1.)); +#51861 = ADVANCED_FACE('',(#51862),#51873,.F.); +#51862 = FACE_BOUND('',#51863,.F.); +#51863 = EDGE_LOOP('',(#51864,#51870,#51871,#51872)); +#51864 = ORIENTED_EDGE('',*,*,#51865,.T.); +#51865 = EDGE_CURVE('',#48108,#48217,#51866,.T.); +#51866 = LINE('',#51867,#51868); +#51867 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.)); +#51868 = VECTOR('',#51869,1.); +#51869 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51870 = ORIENTED_EDGE('',*,*,#48225,.T.); +#51871 = ORIENTED_EDGE('',*,*,#51848,.F.); +#51872 = ORIENTED_EDGE('',*,*,#48116,.F.); +#51873 = PLANE('',#51874); +#51874 = AXIS2_PLACEMENT_3D('',#51875,#51876,#51877); +#51875 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.)); +#51876 = DIRECTION('',(0.,0.,1.)); +#51877 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#51878 = ADVANCED_FACE('',(#51879),#51890,.T.); +#51879 = FACE_BOUND('',#51880,.T.); +#51880 = EDGE_LOOP('',(#51881,#51882,#51883,#51884)); +#51881 = ORIENTED_EDGE('',*,*,#48107,.T.); +#51882 = ORIENTED_EDGE('',*,*,#51865,.T.); +#51883 = ORIENTED_EDGE('',*,*,#48216,.F.); +#51884 = ORIENTED_EDGE('',*,*,#51885,.F.); +#51885 = EDGE_CURVE('',#48100,#48209,#51886,.T.); +#51886 = LINE('',#51887,#51888); +#51887 = CARTESIAN_POINT('',(-2.379496640897,-2.11,0.2479055467)); +#51888 = VECTOR('',#51889,1.); +#51889 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51890 = CYLINDRICAL_SURFACE('',#51891,0.3); +#51891 = AXIS2_PLACEMENT_3D('',#51892,#51893,#51894); +#51892 = CARTESIAN_POINT('',(-2.674938966801,-2.11,0.3)); +#51893 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51894 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#51895 = ADVANCED_FACE('',(#51896),#51902,.F.); +#51896 = FACE_BOUND('',#51897,.F.); +#51897 = EDGE_LOOP('',(#51898,#51899,#51900,#51901)); +#51898 = ORIENTED_EDGE('',*,*,#48190,.T.); +#51899 = ORIENTED_EDGE('',*,*,#48208,.T.); +#51900 = ORIENTED_EDGE('',*,*,#51885,.F.); +#51901 = ORIENTED_EDGE('',*,*,#48099,.F.); +#51902 = PLANE('',#51903); +#51903 = AXIS2_PLACEMENT_3D('',#51904,#51905,#51906); +#51904 = CARTESIAN_POINT('',(-2.298480775301,-2.11,0.742364817767)); +#51905 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#51906 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#51907 = ADVANCED_FACE('',(#51908),#51919,.T.); +#51908 = FACE_BOUND('',#51909,.T.); +#51909 = EDGE_LOOP('',(#51910,#51911,#51912,#51913)); +#51910 = ORIENTED_EDGE('',*,*,#48380,.T.); +#51911 = ORIENTED_EDGE('',*,*,#51203,.T.); +#51912 = ORIENTED_EDGE('',*,*,#48489,.F.); +#51913 = ORIENTED_EDGE('',*,*,#51914,.F.); +#51914 = EDGE_CURVE('',#48373,#48482,#51915,.T.); +#51915 = LINE('',#51916,#51917); +#51916 = CARTESIAN_POINT('',(-2.495442325904,-0.84,0.7770944533)); +#51917 = VECTOR('',#51918,1.); +#51918 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51919 = CYLINDRICAL_SURFACE('',#51920,0.3); +#51920 = AXIS2_PLACEMENT_3D('',#51921,#51922,#51923); +#51921 = CARTESIAN_POINT('',(-2.2,-0.84,0.725)); +#51922 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51923 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#51924 = ADVANCED_FACE('',(#51925),#51936,.F.); +#51925 = FACE_BOUND('',#51926,.F.); +#51926 = EDGE_LOOP('',(#51927,#51933,#51934,#51935)); +#51927 = ORIENTED_EDGE('',*,*,#51928,.T.); +#51928 = EDGE_CURVE('',#48364,#48473,#51929,.T.); +#51929 = LINE('',#51930,#51931); +#51930 = CARTESIAN_POINT('',(-2.5764581915,-0.84,0.282635182233)); +#51931 = VECTOR('',#51932,1.); +#51932 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51933 = ORIENTED_EDGE('',*,*,#48481,.T.); +#51934 = ORIENTED_EDGE('',*,*,#51914,.F.); +#51935 = ORIENTED_EDGE('',*,*,#48372,.F.); +#51936 = PLANE('',#51937); +#51937 = AXIS2_PLACEMENT_3D('',#51938,#51939,#51940); +#51938 = CARTESIAN_POINT('',(-2.5764581915,-0.84,0.282635182233)); +#51939 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#51940 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#51941 = ADVANCED_FACE('',(#51942),#51953,.F.); +#51942 = FACE_BOUND('',#51943,.F.); +#51943 = EDGE_LOOP('',(#51944,#51950,#51951,#51952)); +#51944 = ORIENTED_EDGE('',*,*,#51945,.T.); +#51945 = EDGE_CURVE('',#48356,#48465,#51946,.T.); +#51946 = LINE('',#51947,#51948); +#51947 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.2)); +#51948 = VECTOR('',#51949,1.); +#51949 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51950 = ORIENTED_EDGE('',*,*,#48472,.T.); +#51951 = ORIENTED_EDGE('',*,*,#51928,.F.); +#51952 = ORIENTED_EDGE('',*,*,#48363,.F.); +#51953 = CYLINDRICAL_SURFACE('',#51954,0.1); +#51954 = AXIS2_PLACEMENT_3D('',#51955,#51956,#51957); +#51955 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.3)); +#51956 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#51957 = DIRECTION('',(-0.,0.,-1.)); +#51958 = ADVANCED_FACE('',(#51959),#51970,.F.); +#51959 = FACE_BOUND('',#51960,.F.); +#51960 = EDGE_LOOP('',(#51961,#51967,#51968,#51969)); +#51961 = ORIENTED_EDGE('',*,*,#51962,.T.); +#51962 = EDGE_CURVE('',#48348,#48457,#51963,.T.); +#51963 = LINE('',#51964,#51965); +#51964 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#51965 = VECTOR('',#51966,1.); +#51966 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51967 = ORIENTED_EDGE('',*,*,#48464,.T.); +#51968 = ORIENTED_EDGE('',*,*,#51945,.F.); +#51969 = ORIENTED_EDGE('',*,*,#48355,.F.); +#51970 = PLANE('',#51971); +#51971 = AXIS2_PLACEMENT_3D('',#51972,#51973,#51974); +#51972 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#51973 = DIRECTION('',(0.,0.,-1.)); +#51974 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51975 = ADVANCED_FACE('',(#51976),#51987,.F.); +#51976 = FACE_BOUND('',#51977,.F.); +#51977 = EDGE_LOOP('',(#51978,#51984,#51985,#51986)); +#51978 = ORIENTED_EDGE('',*,*,#51979,.T.); +#51979 = EDGE_CURVE('',#48340,#48449,#51980,.T.); +#51980 = LINE('',#51981,#51982); +#51981 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#51982 = VECTOR('',#51983,1.); +#51983 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#51984 = ORIENTED_EDGE('',*,*,#48456,.T.); +#51985 = ORIENTED_EDGE('',*,*,#51962,.F.); +#51986 = ORIENTED_EDGE('',*,*,#48347,.F.); +#51987 = PLANE('',#51988); +#51988 = AXIS2_PLACEMENT_3D('',#51989,#51990,#51991); +#51989 = CARTESIAN_POINT('',(-3.,-0.84,0.)); +#51990 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#51991 = DIRECTION('',(0.,0.,1.)); +#51992 = ADVANCED_FACE('',(#51993),#52004,.F.); +#51993 = FACE_BOUND('',#51994,.F.); +#51994 = EDGE_LOOP('',(#51995,#52001,#52002,#52003)); +#51995 = ORIENTED_EDGE('',*,*,#51996,.T.); +#51996 = EDGE_CURVE('',#48331,#48440,#51997,.T.); +#51997 = LINE('',#51998,#51999); +#51998 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.)); +#51999 = VECTOR('',#52000,1.); +#52000 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52001 = ORIENTED_EDGE('',*,*,#48448,.T.); +#52002 = ORIENTED_EDGE('',*,*,#51979,.F.); +#52003 = ORIENTED_EDGE('',*,*,#48339,.F.); +#52004 = PLANE('',#52005); +#52005 = AXIS2_PLACEMENT_3D('',#52006,#52007,#52008); +#52006 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.)); +#52007 = DIRECTION('',(0.,0.,1.)); +#52008 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52009 = ADVANCED_FACE('',(#52010),#52021,.T.); +#52010 = FACE_BOUND('',#52011,.T.); +#52011 = EDGE_LOOP('',(#52012,#52013,#52014,#52015)); +#52012 = ORIENTED_EDGE('',*,*,#48330,.T.); +#52013 = ORIENTED_EDGE('',*,*,#51996,.T.); +#52014 = ORIENTED_EDGE('',*,*,#48439,.F.); +#52015 = ORIENTED_EDGE('',*,*,#52016,.F.); +#52016 = EDGE_CURVE('',#48323,#48432,#52017,.T.); +#52017 = LINE('',#52018,#52019); +#52018 = CARTESIAN_POINT('',(-2.379496640897,-0.84,0.2479055467)); +#52019 = VECTOR('',#52020,1.); +#52020 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52021 = CYLINDRICAL_SURFACE('',#52022,0.3); +#52022 = AXIS2_PLACEMENT_3D('',#52023,#52024,#52025); +#52023 = CARTESIAN_POINT('',(-2.674938966801,-0.84,0.3)); +#52024 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52025 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52026 = ADVANCED_FACE('',(#52027),#52033,.F.); +#52027 = FACE_BOUND('',#52028,.F.); +#52028 = EDGE_LOOP('',(#52029,#52030,#52031,#52032)); +#52029 = ORIENTED_EDGE('',*,*,#48413,.T.); +#52030 = ORIENTED_EDGE('',*,*,#48431,.T.); +#52031 = ORIENTED_EDGE('',*,*,#52016,.F.); +#52032 = ORIENTED_EDGE('',*,*,#48322,.F.); +#52033 = PLANE('',#52034); +#52034 = AXIS2_PLACEMENT_3D('',#52035,#52036,#52037); +#52035 = CARTESIAN_POINT('',(-2.298480775301,-0.84,0.742364817767)); +#52036 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#52037 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#52038 = ADVANCED_FACE('',(#52039),#52050,.T.); +#52039 = FACE_BOUND('',#52040,.T.); +#52040 = EDGE_LOOP('',(#52041,#52042,#52043,#52044)); +#52041 = ORIENTED_EDGE('',*,*,#48603,.T.); +#52042 = ORIENTED_EDGE('',*,*,#51222,.T.); +#52043 = ORIENTED_EDGE('',*,*,#48712,.F.); +#52044 = ORIENTED_EDGE('',*,*,#52045,.F.); +#52045 = EDGE_CURVE('',#48596,#48705,#52046,.T.); +#52046 = LINE('',#52047,#52048); +#52047 = CARTESIAN_POINT('',(-2.495442325904,0.43,0.7770944533)); +#52048 = VECTOR('',#52049,1.); +#52049 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52050 = CYLINDRICAL_SURFACE('',#52051,0.3); +#52051 = AXIS2_PLACEMENT_3D('',#52052,#52053,#52054); +#52052 = CARTESIAN_POINT('',(-2.2,0.43,0.725)); +#52053 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52054 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#52055 = ADVANCED_FACE('',(#52056),#52067,.F.); +#52056 = FACE_BOUND('',#52057,.F.); +#52057 = EDGE_LOOP('',(#52058,#52064,#52065,#52066)); +#52058 = ORIENTED_EDGE('',*,*,#52059,.T.); +#52059 = EDGE_CURVE('',#48587,#48696,#52060,.T.); +#52060 = LINE('',#52061,#52062); +#52061 = CARTESIAN_POINT('',(-2.5764581915,0.43,0.282635182233)); +#52062 = VECTOR('',#52063,1.); +#52063 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52064 = ORIENTED_EDGE('',*,*,#48704,.T.); +#52065 = ORIENTED_EDGE('',*,*,#52045,.F.); +#52066 = ORIENTED_EDGE('',*,*,#48595,.F.); +#52067 = PLANE('',#52068); +#52068 = AXIS2_PLACEMENT_3D('',#52069,#52070,#52071); +#52069 = CARTESIAN_POINT('',(-2.5764581915,0.43,0.282635182233)); +#52070 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#52071 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#52072 = ADVANCED_FACE('',(#52073),#52084,.F.); +#52073 = FACE_BOUND('',#52074,.F.); +#52074 = EDGE_LOOP('',(#52075,#52081,#52082,#52083)); +#52075 = ORIENTED_EDGE('',*,*,#52076,.T.); +#52076 = EDGE_CURVE('',#48579,#48688,#52077,.T.); +#52077 = LINE('',#52078,#52079); +#52078 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.2)); +#52079 = VECTOR('',#52080,1.); +#52080 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52081 = ORIENTED_EDGE('',*,*,#48695,.T.); +#52082 = ORIENTED_EDGE('',*,*,#52059,.F.); +#52083 = ORIENTED_EDGE('',*,*,#48586,.F.); +#52084 = CYLINDRICAL_SURFACE('',#52085,0.1); +#52085 = AXIS2_PLACEMENT_3D('',#52086,#52087,#52088); +#52086 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.3)); +#52087 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52088 = DIRECTION('',(-0.,0.,-1.)); +#52089 = ADVANCED_FACE('',(#52090),#52101,.F.); +#52090 = FACE_BOUND('',#52091,.F.); +#52091 = EDGE_LOOP('',(#52092,#52098,#52099,#52100)); +#52092 = ORIENTED_EDGE('',*,*,#52093,.T.); +#52093 = EDGE_CURVE('',#48571,#48680,#52094,.T.); +#52094 = LINE('',#52095,#52096); +#52095 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#52096 = VECTOR('',#52097,1.); +#52097 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52098 = ORIENTED_EDGE('',*,*,#48687,.T.); +#52099 = ORIENTED_EDGE('',*,*,#52076,.F.); +#52100 = ORIENTED_EDGE('',*,*,#48578,.F.); +#52101 = PLANE('',#52102); +#52102 = AXIS2_PLACEMENT_3D('',#52103,#52104,#52105); +#52103 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#52104 = DIRECTION('',(0.,0.,-1.)); +#52105 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52106 = ADVANCED_FACE('',(#52107),#52118,.F.); +#52107 = FACE_BOUND('',#52108,.F.); +#52108 = EDGE_LOOP('',(#52109,#52115,#52116,#52117)); +#52109 = ORIENTED_EDGE('',*,*,#52110,.T.); +#52110 = EDGE_CURVE('',#48563,#48672,#52111,.T.); +#52111 = LINE('',#52112,#52113); +#52112 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#52113 = VECTOR('',#52114,1.); +#52114 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52115 = ORIENTED_EDGE('',*,*,#48679,.T.); +#52116 = ORIENTED_EDGE('',*,*,#52093,.F.); +#52117 = ORIENTED_EDGE('',*,*,#48570,.F.); +#52118 = PLANE('',#52119); +#52119 = AXIS2_PLACEMENT_3D('',#52120,#52121,#52122); +#52120 = CARTESIAN_POINT('',(-3.,0.43,0.)); +#52121 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52122 = DIRECTION('',(0.,0.,1.)); +#52123 = ADVANCED_FACE('',(#52124),#52135,.F.); +#52124 = FACE_BOUND('',#52125,.F.); +#52125 = EDGE_LOOP('',(#52126,#52132,#52133,#52134)); +#52126 = ORIENTED_EDGE('',*,*,#52127,.T.); +#52127 = EDGE_CURVE('',#48554,#48663,#52128,.T.); +#52128 = LINE('',#52129,#52130); +#52129 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.)); +#52130 = VECTOR('',#52131,1.); +#52131 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52132 = ORIENTED_EDGE('',*,*,#48671,.T.); +#52133 = ORIENTED_EDGE('',*,*,#52110,.F.); +#52134 = ORIENTED_EDGE('',*,*,#48562,.F.); +#52135 = PLANE('',#52136); +#52136 = AXIS2_PLACEMENT_3D('',#52137,#52138,#52139); +#52137 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.)); +#52138 = DIRECTION('',(0.,0.,1.)); +#52139 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52140 = ADVANCED_FACE('',(#52141),#52152,.T.); +#52141 = FACE_BOUND('',#52142,.T.); +#52142 = EDGE_LOOP('',(#52143,#52144,#52145,#52146)); +#52143 = ORIENTED_EDGE('',*,*,#48553,.T.); +#52144 = ORIENTED_EDGE('',*,*,#52127,.T.); +#52145 = ORIENTED_EDGE('',*,*,#48662,.F.); +#52146 = ORIENTED_EDGE('',*,*,#52147,.F.); +#52147 = EDGE_CURVE('',#48546,#48655,#52148,.T.); +#52148 = LINE('',#52149,#52150); +#52149 = CARTESIAN_POINT('',(-2.379496640897,0.43,0.2479055467)); +#52150 = VECTOR('',#52151,1.); +#52151 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52152 = CYLINDRICAL_SURFACE('',#52153,0.3); +#52153 = AXIS2_PLACEMENT_3D('',#52154,#52155,#52156); +#52154 = CARTESIAN_POINT('',(-2.674938966801,0.43,0.3)); +#52155 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52156 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52157 = ADVANCED_FACE('',(#52158),#52164,.F.); +#52158 = FACE_BOUND('',#52159,.F.); +#52159 = EDGE_LOOP('',(#52160,#52161,#52162,#52163)); +#52160 = ORIENTED_EDGE('',*,*,#48636,.T.); +#52161 = ORIENTED_EDGE('',*,*,#48654,.T.); +#52162 = ORIENTED_EDGE('',*,*,#52147,.F.); +#52163 = ORIENTED_EDGE('',*,*,#48545,.F.); +#52164 = PLANE('',#52165); +#52165 = AXIS2_PLACEMENT_3D('',#52166,#52167,#52168); +#52166 = CARTESIAN_POINT('',(-2.298480775301,0.43,0.742364817767)); +#52167 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#52168 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#52169 = ADVANCED_FACE('',(#52170),#52181,.T.); +#52170 = FACE_BOUND('',#52171,.T.); +#52171 = EDGE_LOOP('',(#52172,#52173,#52174,#52175)); +#52172 = ORIENTED_EDGE('',*,*,#48826,.T.); +#52173 = ORIENTED_EDGE('',*,*,#51241,.T.); +#52174 = ORIENTED_EDGE('',*,*,#48935,.F.); +#52175 = ORIENTED_EDGE('',*,*,#52176,.F.); +#52176 = EDGE_CURVE('',#48819,#48928,#52177,.T.); +#52177 = LINE('',#52178,#52179); +#52178 = CARTESIAN_POINT('',(-2.495442325904,1.7,0.7770944533)); +#52179 = VECTOR('',#52180,1.); +#52180 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52181 = CYLINDRICAL_SURFACE('',#52182,0.3); +#52182 = AXIS2_PLACEMENT_3D('',#52183,#52184,#52185); +#52183 = CARTESIAN_POINT('',(-2.2,1.7,0.725)); +#52184 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52185 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#52186 = ADVANCED_FACE('',(#52187),#52198,.F.); +#52187 = FACE_BOUND('',#52188,.F.); +#52188 = EDGE_LOOP('',(#52189,#52195,#52196,#52197)); +#52189 = ORIENTED_EDGE('',*,*,#52190,.T.); +#52190 = EDGE_CURVE('',#48810,#48919,#52191,.T.); +#52191 = LINE('',#52192,#52193); +#52192 = CARTESIAN_POINT('',(-2.5764581915,1.7,0.282635182233)); +#52193 = VECTOR('',#52194,1.); +#52194 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52195 = ORIENTED_EDGE('',*,*,#48927,.T.); +#52196 = ORIENTED_EDGE('',*,*,#52176,.F.); +#52197 = ORIENTED_EDGE('',*,*,#48818,.F.); +#52198 = PLANE('',#52199); +#52199 = AXIS2_PLACEMENT_3D('',#52200,#52201,#52202); +#52200 = CARTESIAN_POINT('',(-2.5764581915,1.7,0.282635182233)); +#52201 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#52202 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#52203 = ADVANCED_FACE('',(#52204),#52215,.F.); +#52204 = FACE_BOUND('',#52205,.F.); +#52205 = EDGE_LOOP('',(#52206,#52212,#52213,#52214)); +#52206 = ORIENTED_EDGE('',*,*,#52207,.T.); +#52207 = EDGE_CURVE('',#48802,#48911,#52208,.T.); +#52208 = LINE('',#52209,#52210); +#52209 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.2)); +#52210 = VECTOR('',#52211,1.); +#52211 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52212 = ORIENTED_EDGE('',*,*,#48918,.T.); +#52213 = ORIENTED_EDGE('',*,*,#52190,.F.); +#52214 = ORIENTED_EDGE('',*,*,#48809,.F.); +#52215 = CYLINDRICAL_SURFACE('',#52216,0.1); +#52216 = AXIS2_PLACEMENT_3D('',#52217,#52218,#52219); +#52217 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.3)); +#52218 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52219 = DIRECTION('',(-0.,0.,-1.)); +#52220 = ADVANCED_FACE('',(#52221),#52232,.F.); +#52221 = FACE_BOUND('',#52222,.F.); +#52222 = EDGE_LOOP('',(#52223,#52229,#52230,#52231)); +#52223 = ORIENTED_EDGE('',*,*,#52224,.T.); +#52224 = EDGE_CURVE('',#48794,#48903,#52225,.T.); +#52225 = LINE('',#52226,#52227); +#52226 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#52227 = VECTOR('',#52228,1.); +#52228 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52229 = ORIENTED_EDGE('',*,*,#48910,.T.); +#52230 = ORIENTED_EDGE('',*,*,#52207,.F.); +#52231 = ORIENTED_EDGE('',*,*,#48801,.F.); +#52232 = PLANE('',#52233); +#52233 = AXIS2_PLACEMENT_3D('',#52234,#52235,#52236); +#52234 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#52235 = DIRECTION('',(0.,0.,-1.)); +#52236 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52237 = ADVANCED_FACE('',(#52238),#52249,.F.); +#52238 = FACE_BOUND('',#52239,.F.); +#52239 = EDGE_LOOP('',(#52240,#52246,#52247,#52248)); +#52240 = ORIENTED_EDGE('',*,*,#52241,.T.); +#52241 = EDGE_CURVE('',#48786,#48895,#52242,.T.); +#52242 = LINE('',#52243,#52244); +#52243 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#52244 = VECTOR('',#52245,1.); +#52245 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52246 = ORIENTED_EDGE('',*,*,#48902,.T.); +#52247 = ORIENTED_EDGE('',*,*,#52224,.F.); +#52248 = ORIENTED_EDGE('',*,*,#48793,.F.); +#52249 = PLANE('',#52250); +#52250 = AXIS2_PLACEMENT_3D('',#52251,#52252,#52253); +#52251 = CARTESIAN_POINT('',(-3.,1.7,0.)); +#52252 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52253 = DIRECTION('',(0.,0.,1.)); +#52254 = ADVANCED_FACE('',(#52255),#52266,.F.); +#52255 = FACE_BOUND('',#52256,.F.); +#52256 = EDGE_LOOP('',(#52257,#52263,#52264,#52265)); +#52257 = ORIENTED_EDGE('',*,*,#52258,.T.); +#52258 = EDGE_CURVE('',#48777,#48886,#52259,.T.); +#52259 = LINE('',#52260,#52261); +#52260 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.)); +#52261 = VECTOR('',#52262,1.); +#52262 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52263 = ORIENTED_EDGE('',*,*,#48894,.T.); +#52264 = ORIENTED_EDGE('',*,*,#52241,.F.); +#52265 = ORIENTED_EDGE('',*,*,#48785,.F.); +#52266 = PLANE('',#52267); +#52267 = AXIS2_PLACEMENT_3D('',#52268,#52269,#52270); +#52268 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.)); +#52269 = DIRECTION('',(0.,0.,1.)); +#52270 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52271 = ADVANCED_FACE('',(#52272),#52283,.T.); +#52272 = FACE_BOUND('',#52273,.T.); +#52273 = EDGE_LOOP('',(#52274,#52275,#52276,#52277)); +#52274 = ORIENTED_EDGE('',*,*,#48776,.T.); +#52275 = ORIENTED_EDGE('',*,*,#52258,.T.); +#52276 = ORIENTED_EDGE('',*,*,#48885,.F.); +#52277 = ORIENTED_EDGE('',*,*,#52278,.F.); +#52278 = EDGE_CURVE('',#48769,#48878,#52279,.T.); +#52279 = LINE('',#52280,#52281); +#52280 = CARTESIAN_POINT('',(-2.379496640897,1.7,0.2479055467)); +#52281 = VECTOR('',#52282,1.); +#52282 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52283 = CYLINDRICAL_SURFACE('',#52284,0.3); +#52284 = AXIS2_PLACEMENT_3D('',#52285,#52286,#52287); +#52285 = CARTESIAN_POINT('',(-2.674938966801,1.7,0.3)); +#52286 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52287 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52288 = ADVANCED_FACE('',(#52289),#52295,.F.); +#52289 = FACE_BOUND('',#52290,.F.); +#52290 = EDGE_LOOP('',(#52291,#52292,#52293,#52294)); +#52291 = ORIENTED_EDGE('',*,*,#48859,.T.); +#52292 = ORIENTED_EDGE('',*,*,#48877,.T.); +#52293 = ORIENTED_EDGE('',*,*,#52278,.F.); +#52294 = ORIENTED_EDGE('',*,*,#48768,.F.); +#52295 = PLANE('',#52296); +#52296 = AXIS2_PLACEMENT_3D('',#52297,#52298,#52299); +#52297 = CARTESIAN_POINT('',(-2.298480775301,1.7,0.742364817767)); +#52298 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#52299 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#52300 = ADVANCED_FACE('',(#52301),#52312,.T.); +#52301 = FACE_BOUND('',#52302,.T.); +#52302 = EDGE_LOOP('',(#52303,#52304,#52305,#52306)); +#52303 = ORIENTED_EDGE('',*,*,#49049,.T.); +#52304 = ORIENTED_EDGE('',*,*,#51260,.T.); +#52305 = ORIENTED_EDGE('',*,*,#49158,.F.); +#52306 = ORIENTED_EDGE('',*,*,#52307,.F.); +#52307 = EDGE_CURVE('',#49042,#49151,#52308,.T.); +#52308 = LINE('',#52309,#52310); +#52309 = CARTESIAN_POINT('',(-2.495442325904,2.97,0.7770944533)); +#52310 = VECTOR('',#52311,1.); +#52311 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52312 = CYLINDRICAL_SURFACE('',#52313,0.3); +#52313 = AXIS2_PLACEMENT_3D('',#52314,#52315,#52316); +#52314 = CARTESIAN_POINT('',(-2.2,2.97,0.725)); +#52315 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52316 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#52317 = ADVANCED_FACE('',(#52318),#52329,.F.); +#52318 = FACE_BOUND('',#52319,.F.); +#52319 = EDGE_LOOP('',(#52320,#52326,#52327,#52328)); +#52320 = ORIENTED_EDGE('',*,*,#52321,.T.); +#52321 = EDGE_CURVE('',#49033,#49142,#52322,.T.); +#52322 = LINE('',#52323,#52324); +#52323 = CARTESIAN_POINT('',(-2.5764581915,2.97,0.282635182233)); +#52324 = VECTOR('',#52325,1.); +#52325 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52326 = ORIENTED_EDGE('',*,*,#49150,.T.); +#52327 = ORIENTED_EDGE('',*,*,#52307,.F.); +#52328 = ORIENTED_EDGE('',*,*,#49041,.F.); +#52329 = PLANE('',#52330); +#52330 = AXIS2_PLACEMENT_3D('',#52331,#52332,#52333); +#52331 = CARTESIAN_POINT('',(-2.5764581915,2.97,0.282635182233)); +#52332 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#52333 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#52334 = ADVANCED_FACE('',(#52335),#52346,.F.); +#52335 = FACE_BOUND('',#52336,.F.); +#52336 = EDGE_LOOP('',(#52337,#52343,#52344,#52345)); +#52337 = ORIENTED_EDGE('',*,*,#52338,.T.); +#52338 = EDGE_CURVE('',#49025,#49134,#52339,.T.); +#52339 = LINE('',#52340,#52341); +#52340 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.2)); +#52341 = VECTOR('',#52342,1.); +#52342 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52343 = ORIENTED_EDGE('',*,*,#49141,.T.); +#52344 = ORIENTED_EDGE('',*,*,#52321,.F.); +#52345 = ORIENTED_EDGE('',*,*,#49032,.F.); +#52346 = CYLINDRICAL_SURFACE('',#52347,0.1); +#52347 = AXIS2_PLACEMENT_3D('',#52348,#52349,#52350); +#52348 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.3)); +#52349 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52350 = DIRECTION('',(-0.,0.,-1.)); +#52351 = ADVANCED_FACE('',(#52352),#52363,.F.); +#52352 = FACE_BOUND('',#52353,.F.); +#52353 = EDGE_LOOP('',(#52354,#52360,#52361,#52362)); +#52354 = ORIENTED_EDGE('',*,*,#52355,.T.); +#52355 = EDGE_CURVE('',#49017,#49126,#52356,.T.); +#52356 = LINE('',#52357,#52358); +#52357 = CARTESIAN_POINT('',(-3.,2.97,0.2)); +#52358 = VECTOR('',#52359,1.); +#52359 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52360 = ORIENTED_EDGE('',*,*,#49133,.T.); +#52361 = ORIENTED_EDGE('',*,*,#52338,.F.); +#52362 = ORIENTED_EDGE('',*,*,#49024,.F.); +#52363 = PLANE('',#52364); +#52364 = AXIS2_PLACEMENT_3D('',#52365,#52366,#52367); +#52365 = CARTESIAN_POINT('',(-3.,2.97,0.2)); +#52366 = DIRECTION('',(0.,0.,-1.)); +#52367 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52368 = ADVANCED_FACE('',(#52369),#52380,.F.); +#52369 = FACE_BOUND('',#52370,.F.); +#52370 = EDGE_LOOP('',(#52371,#52377,#52378,#52379)); +#52371 = ORIENTED_EDGE('',*,*,#52372,.T.); +#52372 = EDGE_CURVE('',#49009,#49118,#52373,.T.); +#52373 = LINE('',#52374,#52375); +#52374 = CARTESIAN_POINT('',(-3.,2.97,0.)); +#52375 = VECTOR('',#52376,1.); +#52376 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52377 = ORIENTED_EDGE('',*,*,#49125,.T.); +#52378 = ORIENTED_EDGE('',*,*,#52355,.F.); +#52379 = ORIENTED_EDGE('',*,*,#49016,.F.); +#52380 = PLANE('',#52381); +#52381 = AXIS2_PLACEMENT_3D('',#52382,#52383,#52384); +#52382 = CARTESIAN_POINT('',(-3.,2.97,0.)); +#52383 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52384 = DIRECTION('',(0.,0.,1.)); +#52385 = ADVANCED_FACE('',(#52386),#52397,.F.); +#52386 = FACE_BOUND('',#52387,.F.); +#52387 = EDGE_LOOP('',(#52388,#52394,#52395,#52396)); +#52388 = ORIENTED_EDGE('',*,*,#52389,.T.); +#52389 = EDGE_CURVE('',#49000,#49109,#52390,.T.); +#52390 = LINE('',#52391,#52392); +#52391 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.)); +#52392 = VECTOR('',#52393,1.); +#52393 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52394 = ORIENTED_EDGE('',*,*,#49117,.T.); +#52395 = ORIENTED_EDGE('',*,*,#52372,.F.); +#52396 = ORIENTED_EDGE('',*,*,#49008,.F.); +#52397 = PLANE('',#52398); +#52398 = AXIS2_PLACEMENT_3D('',#52399,#52400,#52401); +#52399 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.)); +#52400 = DIRECTION('',(0.,0.,1.)); +#52401 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52402 = ADVANCED_FACE('',(#52403),#52414,.T.); +#52403 = FACE_BOUND('',#52404,.T.); +#52404 = EDGE_LOOP('',(#52405,#52406,#52407,#52408)); +#52405 = ORIENTED_EDGE('',*,*,#48999,.T.); +#52406 = ORIENTED_EDGE('',*,*,#52389,.T.); +#52407 = ORIENTED_EDGE('',*,*,#49108,.F.); +#52408 = ORIENTED_EDGE('',*,*,#52409,.F.); +#52409 = EDGE_CURVE('',#48992,#49101,#52410,.T.); +#52410 = LINE('',#52411,#52412); +#52411 = CARTESIAN_POINT('',(-2.379496640897,2.97,0.2479055467)); +#52412 = VECTOR('',#52413,1.); +#52413 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52414 = CYLINDRICAL_SURFACE('',#52415,0.3); +#52415 = AXIS2_PLACEMENT_3D('',#52416,#52417,#52418); +#52416 = CARTESIAN_POINT('',(-2.674938966801,2.97,0.3)); +#52417 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52418 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52419 = ADVANCED_FACE('',(#52420),#52426,.F.); +#52420 = FACE_BOUND('',#52421,.F.); +#52421 = EDGE_LOOP('',(#52422,#52423,#52424,#52425)); +#52422 = ORIENTED_EDGE('',*,*,#49082,.T.); +#52423 = ORIENTED_EDGE('',*,*,#49100,.T.); +#52424 = ORIENTED_EDGE('',*,*,#52409,.F.); +#52425 = ORIENTED_EDGE('',*,*,#48991,.F.); +#52426 = PLANE('',#52427); +#52427 = AXIS2_PLACEMENT_3D('',#52428,#52429,#52430); +#52428 = CARTESIAN_POINT('',(-2.298480775301,2.97,0.742364817767)); +#52429 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#52430 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#52431 = ADVANCED_FACE('',(#52432),#52443,.F.); +#52432 = FACE_BOUND('',#52433,.F.); +#52433 = EDGE_LOOP('',(#52434,#52440,#52441,#52442)); +#52434 = ORIENTED_EDGE('',*,*,#52435,.T.); +#52435 = EDGE_CURVE('',#49251,#49353,#52436,.T.); +#52436 = LINE('',#52437,#52438); +#52437 = CARTESIAN_POINT('',(-2.5764581915,4.24,0.282635182233)); +#52438 = VECTOR('',#52439,1.); +#52439 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52440 = ORIENTED_EDGE('',*,*,#49361,.T.); +#52441 = ORIENTED_EDGE('',*,*,#51131,.F.); +#52442 = ORIENTED_EDGE('',*,*,#49259,.F.); +#52443 = PLANE('',#52444); +#52444 = AXIS2_PLACEMENT_3D('',#52445,#52446,#52447); +#52445 = CARTESIAN_POINT('',(-2.5764581915,4.24,0.282635182233)); +#52446 = DIRECTION('',(0.986841372087,-1.129181146488E-17, + -0.161691392282)); +#52447 = DIRECTION('',(0.161691392282,-1.85013394127E-18,0.986841372087) + ); +#52448 = ADVANCED_FACE('',(#52449),#52460,.F.); +#52449 = FACE_BOUND('',#52450,.F.); +#52450 = EDGE_LOOP('',(#52451,#52457,#52458,#52459)); +#52451 = ORIENTED_EDGE('',*,*,#52452,.T.); +#52452 = EDGE_CURVE('',#49243,#49345,#52453,.T.); +#52453 = LINE('',#52454,#52455); +#52454 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.2)); +#52455 = VECTOR('',#52456,1.); +#52456 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52457 = ORIENTED_EDGE('',*,*,#49352,.T.); +#52458 = ORIENTED_EDGE('',*,*,#52435,.F.); +#52459 = ORIENTED_EDGE('',*,*,#49250,.F.); +#52460 = CYLINDRICAL_SURFACE('',#52461,0.1); +#52461 = AXIS2_PLACEMENT_3D('',#52462,#52463,#52464); +#52462 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.3)); +#52463 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52464 = DIRECTION('',(-0.,0.,-1.)); +#52465 = ADVANCED_FACE('',(#52466),#52477,.F.); +#52466 = FACE_BOUND('',#52467,.F.); +#52467 = EDGE_LOOP('',(#52468,#52474,#52475,#52476)); +#52468 = ORIENTED_EDGE('',*,*,#52469,.T.); +#52469 = EDGE_CURVE('',#49235,#49337,#52470,.T.); +#52470 = LINE('',#52471,#52472); +#52471 = CARTESIAN_POINT('',(-3.,4.24,0.2)); +#52472 = VECTOR('',#52473,1.); +#52473 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52474 = ORIENTED_EDGE('',*,*,#49344,.T.); +#52475 = ORIENTED_EDGE('',*,*,#52452,.F.); +#52476 = ORIENTED_EDGE('',*,*,#49242,.F.); +#52477 = PLANE('',#52478); +#52478 = AXIS2_PLACEMENT_3D('',#52479,#52480,#52481); +#52479 = CARTESIAN_POINT('',(-3.,4.24,0.2)); +#52480 = DIRECTION('',(0.,0.,-1.)); +#52481 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52482 = ADVANCED_FACE('',(#52483),#52494,.F.); +#52483 = FACE_BOUND('',#52484,.F.); +#52484 = EDGE_LOOP('',(#52485,#52491,#52492,#52493)); +#52485 = ORIENTED_EDGE('',*,*,#52486,.T.); +#52486 = EDGE_CURVE('',#49227,#49329,#52487,.T.); +#52487 = LINE('',#52488,#52489); +#52488 = CARTESIAN_POINT('',(-3.,4.24,0.)); +#52489 = VECTOR('',#52490,1.); +#52490 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52491 = ORIENTED_EDGE('',*,*,#49336,.T.); +#52492 = ORIENTED_EDGE('',*,*,#52469,.F.); +#52493 = ORIENTED_EDGE('',*,*,#49234,.F.); +#52494 = PLANE('',#52495); +#52495 = AXIS2_PLACEMENT_3D('',#52496,#52497,#52498); +#52496 = CARTESIAN_POINT('',(-3.,4.24,0.)); +#52497 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#52498 = DIRECTION('',(0.,0.,1.)); +#52499 = ADVANCED_FACE('',(#52500),#52511,.F.); +#52500 = FACE_BOUND('',#52501,.F.); +#52501 = EDGE_LOOP('',(#52502,#52508,#52509,#52510)); +#52502 = ORIENTED_EDGE('',*,*,#52503,.T.); +#52503 = EDGE_CURVE('',#49218,#49320,#52504,.T.); +#52504 = LINE('',#52505,#52506); +#52505 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.)); +#52506 = VECTOR('',#52507,1.); +#52507 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52508 = ORIENTED_EDGE('',*,*,#49328,.T.); +#52509 = ORIENTED_EDGE('',*,*,#52486,.F.); +#52510 = ORIENTED_EDGE('',*,*,#49226,.F.); +#52511 = PLANE('',#52512); +#52512 = AXIS2_PLACEMENT_3D('',#52513,#52514,#52515); +#52513 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.)); +#52514 = DIRECTION('',(0.,0.,1.)); +#52515 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#52516 = ADVANCED_FACE('',(#52517),#52528,.T.); +#52517 = FACE_BOUND('',#52518,.T.); +#52518 = EDGE_LOOP('',(#52519,#52520,#52521,#52522)); +#52519 = ORIENTED_EDGE('',*,*,#49217,.T.); +#52520 = ORIENTED_EDGE('',*,*,#52503,.T.); +#52521 = ORIENTED_EDGE('',*,*,#49319,.F.); +#52522 = ORIENTED_EDGE('',*,*,#52523,.F.); +#52523 = EDGE_CURVE('',#49210,#49312,#52524,.T.); +#52524 = LINE('',#52525,#52526); +#52525 = CARTESIAN_POINT('',(-2.379496640897,4.24,0.2479055467)); +#52526 = VECTOR('',#52527,1.); +#52527 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#52528 = CYLINDRICAL_SURFACE('',#52529,0.3); +#52529 = AXIS2_PLACEMENT_3D('',#52530,#52531,#52532); +#52530 = CARTESIAN_POINT('',(-2.674938966801,4.24,0.3)); +#52531 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#52532 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#52533 = ADVANCED_FACE('',(#52534),#52540,.F.); +#52534 = FACE_BOUND('',#52535,.F.); +#52535 = EDGE_LOOP('',(#52536,#52537,#52538,#52539)); +#52536 = ORIENTED_EDGE('',*,*,#49293,.T.); +#52537 = ORIENTED_EDGE('',*,*,#49311,.T.); +#52538 = ORIENTED_EDGE('',*,*,#52523,.F.); +#52539 = ORIENTED_EDGE('',*,*,#49209,.F.); +#52540 = PLANE('',#52541); +#52541 = AXIS2_PLACEMENT_3D('',#52542,#52543,#52544); +#52542 = CARTESIAN_POINT('',(-2.298480775301,4.24,0.742364817767)); +#52543 = DIRECTION('',(-0.986841372087,1.129181146488E-17,0.161691392282 + )); +#52544 = DIRECTION('',(-0.161691392282,1.85013394127E-18,-0.986841372087 + )); +#52545 = ADVANCED_FACE('',(#52546),#52557,.F.); +#52546 = FACE_BOUND('',#52547,.F.); +#52547 = EDGE_LOOP('',(#52548,#52554,#52555,#52556)); +#52548 = ORIENTED_EDGE('',*,*,#52549,.T.); +#52549 = EDGE_CURVE('',#49438,#49540,#52550,.T.); +#52550 = LINE('',#52551,#52552); +#52551 = CARTESIAN_POINT('',(2.5764581915,4.65,0.282635182233)); +#52552 = VECTOR('',#52553,1.); +#52553 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52554 = ORIENTED_EDGE('',*,*,#49548,.T.); +#52555 = ORIENTED_EDGE('',*,*,#51492,.F.); +#52556 = ORIENTED_EDGE('',*,*,#49446,.F.); +#52557 = PLANE('',#52558); +#52558 = AXIS2_PLACEMENT_3D('',#52559,#52560,#52561); +#52559 = CARTESIAN_POINT('',(2.5764581915,4.65,0.282635182233)); +#52560 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#52561 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#52562 = ADVANCED_FACE('',(#52563),#52574,.F.); +#52563 = FACE_BOUND('',#52564,.F.); +#52564 = EDGE_LOOP('',(#52565,#52571,#52572,#52573)); +#52565 = ORIENTED_EDGE('',*,*,#52566,.T.); +#52566 = EDGE_CURVE('',#49430,#49532,#52567,.T.); +#52567 = LINE('',#52568,#52569); +#52568 = CARTESIAN_POINT('',(2.674938966801,4.65,0.2)); +#52569 = VECTOR('',#52570,1.); +#52570 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52571 = ORIENTED_EDGE('',*,*,#49539,.T.); +#52572 = ORIENTED_EDGE('',*,*,#52549,.F.); +#52573 = ORIENTED_EDGE('',*,*,#49437,.F.); +#52574 = CYLINDRICAL_SURFACE('',#52575,0.1); +#52575 = AXIS2_PLACEMENT_3D('',#52576,#52577,#52578); +#52576 = CARTESIAN_POINT('',(2.674938966801,4.65,0.3)); +#52577 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52578 = DIRECTION('',(0.,0.,-1.)); +#52579 = ADVANCED_FACE('',(#52580),#52591,.F.); +#52580 = FACE_BOUND('',#52581,.F.); +#52581 = EDGE_LOOP('',(#52582,#52588,#52589,#52590)); +#52582 = ORIENTED_EDGE('',*,*,#52583,.T.); +#52583 = EDGE_CURVE('',#49422,#49524,#52584,.T.); +#52584 = LINE('',#52585,#52586); +#52585 = CARTESIAN_POINT('',(3.,4.65,0.2)); +#52586 = VECTOR('',#52587,1.); +#52587 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52588 = ORIENTED_EDGE('',*,*,#49531,.T.); +#52589 = ORIENTED_EDGE('',*,*,#52566,.F.); +#52590 = ORIENTED_EDGE('',*,*,#49429,.F.); +#52591 = PLANE('',#52592); +#52592 = AXIS2_PLACEMENT_3D('',#52593,#52594,#52595); +#52593 = CARTESIAN_POINT('',(3.,4.65,0.2)); +#52594 = DIRECTION('',(0.,0.,-1.)); +#52595 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#52596 = ADVANCED_FACE('',(#52597),#52608,.F.); +#52597 = FACE_BOUND('',#52598,.F.); +#52598 = EDGE_LOOP('',(#52599,#52605,#52606,#52607)); +#52599 = ORIENTED_EDGE('',*,*,#52600,.T.); +#52600 = EDGE_CURVE('',#49414,#49516,#52601,.T.); +#52601 = LINE('',#52602,#52603); +#52602 = CARTESIAN_POINT('',(3.,4.65,0.)); +#52603 = VECTOR('',#52604,1.); +#52604 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52605 = ORIENTED_EDGE('',*,*,#49523,.T.); +#52606 = ORIENTED_EDGE('',*,*,#52583,.F.); +#52607 = ORIENTED_EDGE('',*,*,#49421,.F.); +#52608 = PLANE('',#52609); +#52609 = AXIS2_PLACEMENT_3D('',#52610,#52611,#52612); +#52610 = CARTESIAN_POINT('',(3.,4.65,0.)); +#52611 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52612 = DIRECTION('',(0.,0.,1.)); +#52613 = ADVANCED_FACE('',(#52614),#52625,.F.); +#52614 = FACE_BOUND('',#52615,.F.); +#52615 = EDGE_LOOP('',(#52616,#52622,#52623,#52624)); +#52616 = ORIENTED_EDGE('',*,*,#52617,.T.); +#52617 = EDGE_CURVE('',#49405,#49507,#52618,.T.); +#52618 = LINE('',#52619,#52620); +#52619 = CARTESIAN_POINT('',(2.674938966801,4.65,0.)); +#52620 = VECTOR('',#52621,1.); +#52621 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52622 = ORIENTED_EDGE('',*,*,#49515,.T.); +#52623 = ORIENTED_EDGE('',*,*,#52600,.F.); +#52624 = ORIENTED_EDGE('',*,*,#49413,.F.); +#52625 = PLANE('',#52626); +#52626 = AXIS2_PLACEMENT_3D('',#52627,#52628,#52629); +#52627 = CARTESIAN_POINT('',(2.674938966801,4.65,0.)); +#52628 = DIRECTION('',(0.,0.,1.)); +#52629 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#52630 = ADVANCED_FACE('',(#52631),#52642,.T.); +#52631 = FACE_BOUND('',#52632,.T.); +#52632 = EDGE_LOOP('',(#52633,#52634,#52635,#52636)); +#52633 = ORIENTED_EDGE('',*,*,#49404,.T.); +#52634 = ORIENTED_EDGE('',*,*,#52617,.T.); +#52635 = ORIENTED_EDGE('',*,*,#49506,.F.); +#52636 = ORIENTED_EDGE('',*,*,#52637,.F.); +#52637 = EDGE_CURVE('',#49397,#49499,#52638,.T.); +#52638 = LINE('',#52639,#52640); +#52639 = CARTESIAN_POINT('',(2.379496640897,4.65,0.2479055467)); +#52640 = VECTOR('',#52641,1.); +#52641 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52642 = CYLINDRICAL_SURFACE('',#52643,0.3); +#52643 = AXIS2_PLACEMENT_3D('',#52644,#52645,#52646); +#52644 = CARTESIAN_POINT('',(2.674938966801,4.65,0.3)); +#52645 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52646 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#52647 = ADVANCED_FACE('',(#52648),#52654,.F.); +#52648 = FACE_BOUND('',#52649,.F.); +#52649 = EDGE_LOOP('',(#52650,#52651,#52652,#52653)); +#52650 = ORIENTED_EDGE('',*,*,#49480,.T.); +#52651 = ORIENTED_EDGE('',*,*,#49498,.T.); +#52652 = ORIENTED_EDGE('',*,*,#52637,.F.); +#52653 = ORIENTED_EDGE('',*,*,#49396,.F.); +#52654 = PLANE('',#52655); +#52655 = AXIS2_PLACEMENT_3D('',#52656,#52657,#52658); +#52656 = CARTESIAN_POINT('',(2.298480775301,4.65,0.742364817767)); +#52657 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#52658 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#52659 = ADVANCED_FACE('',(#52660),#52671,.T.); +#52660 = FACE_BOUND('',#52661,.T.); +#52661 = EDGE_LOOP('',(#52662,#52663,#52664,#52665)); +#52662 = ORIENTED_EDGE('',*,*,#49658,.T.); +#52663 = ORIENTED_EDGE('',*,*,#51341,.T.); +#52664 = ORIENTED_EDGE('',*,*,#49767,.F.); +#52665 = ORIENTED_EDGE('',*,*,#52666,.F.); +#52666 = EDGE_CURVE('',#49651,#49760,#52667,.T.); +#52667 = LINE('',#52668,#52669); +#52668 = CARTESIAN_POINT('',(2.495442325904,3.38,0.7770944533)); +#52669 = VECTOR('',#52670,1.); +#52670 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52671 = CYLINDRICAL_SURFACE('',#52672,0.3); +#52672 = AXIS2_PLACEMENT_3D('',#52673,#52674,#52675); +#52673 = CARTESIAN_POINT('',(2.2,3.38,0.725)); +#52674 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52675 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#52676 = ADVANCED_FACE('',(#52677),#52688,.F.); +#52677 = FACE_BOUND('',#52678,.F.); +#52678 = EDGE_LOOP('',(#52679,#52685,#52686,#52687)); +#52679 = ORIENTED_EDGE('',*,*,#52680,.T.); +#52680 = EDGE_CURVE('',#49642,#49751,#52681,.T.); +#52681 = LINE('',#52682,#52683); +#52682 = CARTESIAN_POINT('',(2.5764581915,3.38,0.282635182233)); +#52683 = VECTOR('',#52684,1.); +#52684 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52685 = ORIENTED_EDGE('',*,*,#49759,.T.); +#52686 = ORIENTED_EDGE('',*,*,#52666,.F.); +#52687 = ORIENTED_EDGE('',*,*,#49650,.F.); +#52688 = PLANE('',#52689); +#52689 = AXIS2_PLACEMENT_3D('',#52690,#52691,#52692); +#52690 = CARTESIAN_POINT('',(2.5764581915,3.38,0.282635182233)); +#52691 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#52692 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#52693 = ADVANCED_FACE('',(#52694),#52705,.F.); +#52694 = FACE_BOUND('',#52695,.F.); +#52695 = EDGE_LOOP('',(#52696,#52702,#52703,#52704)); +#52696 = ORIENTED_EDGE('',*,*,#52697,.T.); +#52697 = EDGE_CURVE('',#49634,#49743,#52698,.T.); +#52698 = LINE('',#52699,#52700); +#52699 = CARTESIAN_POINT('',(2.674938966801,3.38,0.2)); +#52700 = VECTOR('',#52701,1.); +#52701 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52702 = ORIENTED_EDGE('',*,*,#49750,.T.); +#52703 = ORIENTED_EDGE('',*,*,#52680,.F.); +#52704 = ORIENTED_EDGE('',*,*,#49641,.F.); +#52705 = CYLINDRICAL_SURFACE('',#52706,0.1); +#52706 = AXIS2_PLACEMENT_3D('',#52707,#52708,#52709); +#52707 = CARTESIAN_POINT('',(2.674938966801,3.38,0.3)); +#52708 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52709 = DIRECTION('',(0.,0.,-1.)); +#52710 = ADVANCED_FACE('',(#52711),#52722,.F.); +#52711 = FACE_BOUND('',#52712,.F.); +#52712 = EDGE_LOOP('',(#52713,#52719,#52720,#52721)); +#52713 = ORIENTED_EDGE('',*,*,#52714,.T.); +#52714 = EDGE_CURVE('',#49626,#49735,#52715,.T.); +#52715 = LINE('',#52716,#52717); +#52716 = CARTESIAN_POINT('',(3.,3.38,0.2)); +#52717 = VECTOR('',#52718,1.); +#52718 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52719 = ORIENTED_EDGE('',*,*,#49742,.T.); +#52720 = ORIENTED_EDGE('',*,*,#52697,.F.); +#52721 = ORIENTED_EDGE('',*,*,#49633,.F.); +#52722 = PLANE('',#52723); +#52723 = AXIS2_PLACEMENT_3D('',#52724,#52725,#52726); +#52724 = CARTESIAN_POINT('',(3.,3.38,0.2)); +#52725 = DIRECTION('',(0.,0.,-1.)); +#52726 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#52727 = ADVANCED_FACE('',(#52728),#52739,.F.); +#52728 = FACE_BOUND('',#52729,.F.); +#52729 = EDGE_LOOP('',(#52730,#52736,#52737,#52738)); +#52730 = ORIENTED_EDGE('',*,*,#52731,.T.); +#52731 = EDGE_CURVE('',#49618,#49727,#52732,.T.); +#52732 = LINE('',#52733,#52734); +#52733 = CARTESIAN_POINT('',(3.,3.38,0.)); +#52734 = VECTOR('',#52735,1.); +#52735 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52736 = ORIENTED_EDGE('',*,*,#49734,.T.); +#52737 = ORIENTED_EDGE('',*,*,#52714,.F.); +#52738 = ORIENTED_EDGE('',*,*,#49625,.F.); +#52739 = PLANE('',#52740); +#52740 = AXIS2_PLACEMENT_3D('',#52741,#52742,#52743); +#52741 = CARTESIAN_POINT('',(3.,3.38,0.)); +#52742 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52743 = DIRECTION('',(0.,0.,1.)); +#52744 = ADVANCED_FACE('',(#52745),#52756,.F.); +#52745 = FACE_BOUND('',#52746,.F.); +#52746 = EDGE_LOOP('',(#52747,#52753,#52754,#52755)); +#52747 = ORIENTED_EDGE('',*,*,#52748,.T.); +#52748 = EDGE_CURVE('',#49609,#49718,#52749,.T.); +#52749 = LINE('',#52750,#52751); +#52750 = CARTESIAN_POINT('',(2.674938966801,3.38,0.)); +#52751 = VECTOR('',#52752,1.); +#52752 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52753 = ORIENTED_EDGE('',*,*,#49726,.T.); +#52754 = ORIENTED_EDGE('',*,*,#52731,.F.); +#52755 = ORIENTED_EDGE('',*,*,#49617,.F.); +#52756 = PLANE('',#52757); +#52757 = AXIS2_PLACEMENT_3D('',#52758,#52759,#52760); +#52758 = CARTESIAN_POINT('',(2.674938966801,3.38,0.)); +#52759 = DIRECTION('',(0.,0.,1.)); +#52760 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#52761 = ADVANCED_FACE('',(#52762),#52773,.T.); +#52762 = FACE_BOUND('',#52763,.T.); +#52763 = EDGE_LOOP('',(#52764,#52765,#52766,#52767)); +#52764 = ORIENTED_EDGE('',*,*,#49608,.T.); +#52765 = ORIENTED_EDGE('',*,*,#52748,.T.); +#52766 = ORIENTED_EDGE('',*,*,#49717,.F.); +#52767 = ORIENTED_EDGE('',*,*,#52768,.F.); +#52768 = EDGE_CURVE('',#49601,#49710,#52769,.T.); +#52769 = LINE('',#52770,#52771); +#52770 = CARTESIAN_POINT('',(2.379496640897,3.38,0.2479055467)); +#52771 = VECTOR('',#52772,1.); +#52772 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52773 = CYLINDRICAL_SURFACE('',#52774,0.3); +#52774 = AXIS2_PLACEMENT_3D('',#52775,#52776,#52777); +#52775 = CARTESIAN_POINT('',(2.674938966801,3.38,0.3)); +#52776 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52777 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#52778 = ADVANCED_FACE('',(#52779),#52785,.F.); +#52779 = FACE_BOUND('',#52780,.F.); +#52780 = EDGE_LOOP('',(#52781,#52782,#52783,#52784)); +#52781 = ORIENTED_EDGE('',*,*,#49691,.T.); +#52782 = ORIENTED_EDGE('',*,*,#49709,.T.); +#52783 = ORIENTED_EDGE('',*,*,#52768,.F.); +#52784 = ORIENTED_EDGE('',*,*,#49600,.F.); +#52785 = PLANE('',#52786); +#52786 = AXIS2_PLACEMENT_3D('',#52787,#52788,#52789); +#52787 = CARTESIAN_POINT('',(2.298480775301,3.38,0.742364817767)); +#52788 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#52789 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#52790 = ADVANCED_FACE('',(#52791),#52802,.T.); +#52791 = FACE_BOUND('',#52792,.T.); +#52792 = EDGE_LOOP('',(#52793,#52794,#52795,#52796)); +#52793 = ORIENTED_EDGE('',*,*,#49881,.T.); +#52794 = ORIENTED_EDGE('',*,*,#51360,.T.); +#52795 = ORIENTED_EDGE('',*,*,#49990,.F.); +#52796 = ORIENTED_EDGE('',*,*,#52797,.F.); +#52797 = EDGE_CURVE('',#49874,#49983,#52798,.T.); +#52798 = LINE('',#52799,#52800); +#52799 = CARTESIAN_POINT('',(2.495442325904,2.11,0.7770944533)); +#52800 = VECTOR('',#52801,1.); +#52801 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52802 = CYLINDRICAL_SURFACE('',#52803,0.3); +#52803 = AXIS2_PLACEMENT_3D('',#52804,#52805,#52806); +#52804 = CARTESIAN_POINT('',(2.2,2.11,0.725)); +#52805 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52806 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#52807 = ADVANCED_FACE('',(#52808),#52819,.F.); +#52808 = FACE_BOUND('',#52809,.F.); +#52809 = EDGE_LOOP('',(#52810,#52816,#52817,#52818)); +#52810 = ORIENTED_EDGE('',*,*,#52811,.T.); +#52811 = EDGE_CURVE('',#49865,#49974,#52812,.T.); +#52812 = LINE('',#52813,#52814); +#52813 = CARTESIAN_POINT('',(2.5764581915,2.11,0.282635182233)); +#52814 = VECTOR('',#52815,1.); +#52815 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52816 = ORIENTED_EDGE('',*,*,#49982,.T.); +#52817 = ORIENTED_EDGE('',*,*,#52797,.F.); +#52818 = ORIENTED_EDGE('',*,*,#49873,.F.); +#52819 = PLANE('',#52820); +#52820 = AXIS2_PLACEMENT_3D('',#52821,#52822,#52823); +#52821 = CARTESIAN_POINT('',(2.5764581915,2.11,0.282635182233)); +#52822 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#52823 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#52824 = ADVANCED_FACE('',(#52825),#52836,.F.); +#52825 = FACE_BOUND('',#52826,.F.); +#52826 = EDGE_LOOP('',(#52827,#52833,#52834,#52835)); +#52827 = ORIENTED_EDGE('',*,*,#52828,.T.); +#52828 = EDGE_CURVE('',#49857,#49966,#52829,.T.); +#52829 = LINE('',#52830,#52831); +#52830 = CARTESIAN_POINT('',(2.674938966801,2.11,0.2)); +#52831 = VECTOR('',#52832,1.); +#52832 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52833 = ORIENTED_EDGE('',*,*,#49973,.T.); +#52834 = ORIENTED_EDGE('',*,*,#52811,.F.); +#52835 = ORIENTED_EDGE('',*,*,#49864,.F.); +#52836 = CYLINDRICAL_SURFACE('',#52837,0.1); +#52837 = AXIS2_PLACEMENT_3D('',#52838,#52839,#52840); +#52838 = CARTESIAN_POINT('',(2.674938966801,2.11,0.3)); +#52839 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52840 = DIRECTION('',(0.,0.,-1.)); +#52841 = ADVANCED_FACE('',(#52842),#52853,.F.); +#52842 = FACE_BOUND('',#52843,.F.); +#52843 = EDGE_LOOP('',(#52844,#52850,#52851,#52852)); +#52844 = ORIENTED_EDGE('',*,*,#52845,.T.); +#52845 = EDGE_CURVE('',#49849,#49958,#52846,.T.); +#52846 = LINE('',#52847,#52848); +#52847 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#52848 = VECTOR('',#52849,1.); +#52849 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52850 = ORIENTED_EDGE('',*,*,#49965,.T.); +#52851 = ORIENTED_EDGE('',*,*,#52828,.F.); +#52852 = ORIENTED_EDGE('',*,*,#49856,.F.); +#52853 = PLANE('',#52854); +#52854 = AXIS2_PLACEMENT_3D('',#52855,#52856,#52857); +#52855 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#52856 = DIRECTION('',(0.,0.,-1.)); +#52857 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#52858 = ADVANCED_FACE('',(#52859),#52870,.F.); +#52859 = FACE_BOUND('',#52860,.F.); +#52860 = EDGE_LOOP('',(#52861,#52867,#52868,#52869)); +#52861 = ORIENTED_EDGE('',*,*,#52862,.T.); +#52862 = EDGE_CURVE('',#49841,#49950,#52863,.T.); +#52863 = LINE('',#52864,#52865); +#52864 = CARTESIAN_POINT('',(3.,2.11,0.)); +#52865 = VECTOR('',#52866,1.); +#52866 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52867 = ORIENTED_EDGE('',*,*,#49957,.T.); +#52868 = ORIENTED_EDGE('',*,*,#52845,.F.); +#52869 = ORIENTED_EDGE('',*,*,#49848,.F.); +#52870 = PLANE('',#52871); +#52871 = AXIS2_PLACEMENT_3D('',#52872,#52873,#52874); +#52872 = CARTESIAN_POINT('',(3.,2.11,0.)); +#52873 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#52874 = DIRECTION('',(0.,0.,1.)); +#52875 = ADVANCED_FACE('',(#52876),#52887,.F.); +#52876 = FACE_BOUND('',#52877,.F.); +#52877 = EDGE_LOOP('',(#52878,#52884,#52885,#52886)); +#52878 = ORIENTED_EDGE('',*,*,#52879,.T.); +#52879 = EDGE_CURVE('',#49832,#49941,#52880,.T.); +#52880 = LINE('',#52881,#52882); +#52881 = CARTESIAN_POINT('',(2.674938966801,2.11,0.)); +#52882 = VECTOR('',#52883,1.); +#52883 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52884 = ORIENTED_EDGE('',*,*,#49949,.T.); +#52885 = ORIENTED_EDGE('',*,*,#52862,.F.); +#52886 = ORIENTED_EDGE('',*,*,#49840,.F.); +#52887 = PLANE('',#52888); +#52888 = AXIS2_PLACEMENT_3D('',#52889,#52890,#52891); +#52889 = CARTESIAN_POINT('',(2.674938966801,2.11,0.)); +#52890 = DIRECTION('',(0.,0.,1.)); +#52891 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#52892 = ADVANCED_FACE('',(#52893),#52904,.T.); +#52893 = FACE_BOUND('',#52894,.T.); +#52894 = EDGE_LOOP('',(#52895,#52896,#52897,#52898)); +#52895 = ORIENTED_EDGE('',*,*,#49831,.T.); +#52896 = ORIENTED_EDGE('',*,*,#52879,.T.); +#52897 = ORIENTED_EDGE('',*,*,#49940,.F.); +#52898 = ORIENTED_EDGE('',*,*,#52899,.F.); +#52899 = EDGE_CURVE('',#49824,#49933,#52900,.T.); +#52900 = LINE('',#52901,#52902); +#52901 = CARTESIAN_POINT('',(2.379496640897,2.11,0.2479055467)); +#52902 = VECTOR('',#52903,1.); +#52903 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52904 = CYLINDRICAL_SURFACE('',#52905,0.3); +#52905 = AXIS2_PLACEMENT_3D('',#52906,#52907,#52908); +#52906 = CARTESIAN_POINT('',(2.674938966801,2.11,0.3)); +#52907 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52908 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#52909 = ADVANCED_FACE('',(#52910),#52916,.F.); +#52910 = FACE_BOUND('',#52911,.F.); +#52911 = EDGE_LOOP('',(#52912,#52913,#52914,#52915)); +#52912 = ORIENTED_EDGE('',*,*,#49914,.T.); +#52913 = ORIENTED_EDGE('',*,*,#49932,.T.); +#52914 = ORIENTED_EDGE('',*,*,#52899,.F.); +#52915 = ORIENTED_EDGE('',*,*,#49823,.F.); +#52916 = PLANE('',#52917); +#52917 = AXIS2_PLACEMENT_3D('',#52918,#52919,#52920); +#52918 = CARTESIAN_POINT('',(2.298480775301,2.11,0.742364817767)); +#52919 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#52920 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#52921 = ADVANCED_FACE('',(#52922),#52933,.T.); +#52922 = FACE_BOUND('',#52923,.T.); +#52923 = EDGE_LOOP('',(#52924,#52925,#52926,#52927)); +#52924 = ORIENTED_EDGE('',*,*,#50104,.T.); +#52925 = ORIENTED_EDGE('',*,*,#51379,.T.); +#52926 = ORIENTED_EDGE('',*,*,#50213,.F.); +#52927 = ORIENTED_EDGE('',*,*,#52928,.F.); +#52928 = EDGE_CURVE('',#50097,#50206,#52929,.T.); +#52929 = LINE('',#52930,#52931); +#52930 = CARTESIAN_POINT('',(2.495442325904,0.84,0.7770944533)); +#52931 = VECTOR('',#52932,1.); +#52932 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52933 = CYLINDRICAL_SURFACE('',#52934,0.3); +#52934 = AXIS2_PLACEMENT_3D('',#52935,#52936,#52937); +#52935 = CARTESIAN_POINT('',(2.2,0.84,0.725)); +#52936 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52937 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#52938 = ADVANCED_FACE('',(#52939),#52950,.F.); +#52939 = FACE_BOUND('',#52940,.F.); +#52940 = EDGE_LOOP('',(#52941,#52947,#52948,#52949)); +#52941 = ORIENTED_EDGE('',*,*,#52942,.T.); +#52942 = EDGE_CURVE('',#50088,#50197,#52943,.T.); +#52943 = LINE('',#52944,#52945); +#52944 = CARTESIAN_POINT('',(2.5764581915,0.84,0.282635182233)); +#52945 = VECTOR('',#52946,1.); +#52946 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52947 = ORIENTED_EDGE('',*,*,#50205,.T.); +#52948 = ORIENTED_EDGE('',*,*,#52928,.F.); +#52949 = ORIENTED_EDGE('',*,*,#50096,.F.); +#52950 = PLANE('',#52951); +#52951 = AXIS2_PLACEMENT_3D('',#52952,#52953,#52954); +#52952 = CARTESIAN_POINT('',(2.5764581915,0.84,0.282635182233)); +#52953 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#52954 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#52955 = ADVANCED_FACE('',(#52956),#52967,.F.); +#52956 = FACE_BOUND('',#52957,.F.); +#52957 = EDGE_LOOP('',(#52958,#52964,#52965,#52966)); +#52958 = ORIENTED_EDGE('',*,*,#52959,.T.); +#52959 = EDGE_CURVE('',#50080,#50189,#52960,.T.); +#52960 = LINE('',#52961,#52962); +#52961 = CARTESIAN_POINT('',(2.674938966801,0.84,0.2)); +#52962 = VECTOR('',#52963,1.); +#52963 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52964 = ORIENTED_EDGE('',*,*,#50196,.T.); +#52965 = ORIENTED_EDGE('',*,*,#52942,.F.); +#52966 = ORIENTED_EDGE('',*,*,#50087,.F.); +#52967 = CYLINDRICAL_SURFACE('',#52968,0.1); +#52968 = AXIS2_PLACEMENT_3D('',#52969,#52970,#52971); +#52969 = CARTESIAN_POINT('',(2.674938966801,0.84,0.3)); +#52970 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#52971 = DIRECTION('',(0.,0.,-1.)); +#52972 = ADVANCED_FACE('',(#52973),#52984,.F.); +#52973 = FACE_BOUND('',#52974,.F.); +#52974 = EDGE_LOOP('',(#52975,#52981,#52982,#52983)); +#52975 = ORIENTED_EDGE('',*,*,#52976,.T.); +#52976 = EDGE_CURVE('',#50072,#50181,#52977,.T.); +#52977 = LINE('',#52978,#52979); +#52978 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#52979 = VECTOR('',#52980,1.); +#52980 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52981 = ORIENTED_EDGE('',*,*,#50188,.T.); +#52982 = ORIENTED_EDGE('',*,*,#52959,.F.); +#52983 = ORIENTED_EDGE('',*,*,#50079,.F.); +#52984 = PLANE('',#52985); +#52985 = AXIS2_PLACEMENT_3D('',#52986,#52987,#52988); +#52986 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#52987 = DIRECTION('',(0.,0.,-1.)); +#52988 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#52989 = ADVANCED_FACE('',(#52990),#53001,.F.); +#52990 = FACE_BOUND('',#52991,.F.); +#52991 = EDGE_LOOP('',(#52992,#52998,#52999,#53000)); +#52992 = ORIENTED_EDGE('',*,*,#52993,.T.); +#52993 = EDGE_CURVE('',#50064,#50173,#52994,.T.); +#52994 = LINE('',#52995,#52996); +#52995 = CARTESIAN_POINT('',(3.,0.84,0.)); +#52996 = VECTOR('',#52997,1.); +#52997 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#52998 = ORIENTED_EDGE('',*,*,#50180,.T.); +#52999 = ORIENTED_EDGE('',*,*,#52976,.F.); +#53000 = ORIENTED_EDGE('',*,*,#50071,.F.); +#53001 = PLANE('',#53002); +#53002 = AXIS2_PLACEMENT_3D('',#53003,#53004,#53005); +#53003 = CARTESIAN_POINT('',(3.,0.84,0.)); +#53004 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53005 = DIRECTION('',(0.,0.,1.)); +#53006 = ADVANCED_FACE('',(#53007),#53018,.F.); +#53007 = FACE_BOUND('',#53008,.F.); +#53008 = EDGE_LOOP('',(#53009,#53015,#53016,#53017)); +#53009 = ORIENTED_EDGE('',*,*,#53010,.T.); +#53010 = EDGE_CURVE('',#50055,#50164,#53011,.T.); +#53011 = LINE('',#53012,#53013); +#53012 = CARTESIAN_POINT('',(2.674938966801,0.84,0.)); +#53013 = VECTOR('',#53014,1.); +#53014 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53015 = ORIENTED_EDGE('',*,*,#50172,.T.); +#53016 = ORIENTED_EDGE('',*,*,#52993,.F.); +#53017 = ORIENTED_EDGE('',*,*,#50063,.F.); +#53018 = PLANE('',#53019); +#53019 = AXIS2_PLACEMENT_3D('',#53020,#53021,#53022); +#53020 = CARTESIAN_POINT('',(2.674938966801,0.84,0.)); +#53021 = DIRECTION('',(0.,0.,1.)); +#53022 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#53023 = ADVANCED_FACE('',(#53024),#53035,.T.); +#53024 = FACE_BOUND('',#53025,.T.); +#53025 = EDGE_LOOP('',(#53026,#53027,#53028,#53029)); +#53026 = ORIENTED_EDGE('',*,*,#50054,.T.); +#53027 = ORIENTED_EDGE('',*,*,#53010,.T.); +#53028 = ORIENTED_EDGE('',*,*,#50163,.F.); +#53029 = ORIENTED_EDGE('',*,*,#53030,.F.); +#53030 = EDGE_CURVE('',#50047,#50156,#53031,.T.); +#53031 = LINE('',#53032,#53033); +#53032 = CARTESIAN_POINT('',(2.379496640897,0.84,0.2479055467)); +#53033 = VECTOR('',#53034,1.); +#53034 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53035 = CYLINDRICAL_SURFACE('',#53036,0.3); +#53036 = AXIS2_PLACEMENT_3D('',#53037,#53038,#53039); +#53037 = CARTESIAN_POINT('',(2.674938966801,0.84,0.3)); +#53038 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53039 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#53040 = ADVANCED_FACE('',(#53041),#53047,.F.); +#53041 = FACE_BOUND('',#53042,.F.); +#53042 = EDGE_LOOP('',(#53043,#53044,#53045,#53046)); +#53043 = ORIENTED_EDGE('',*,*,#50137,.T.); +#53044 = ORIENTED_EDGE('',*,*,#50155,.T.); +#53045 = ORIENTED_EDGE('',*,*,#53030,.F.); +#53046 = ORIENTED_EDGE('',*,*,#50046,.F.); +#53047 = PLANE('',#53048); +#53048 = AXIS2_PLACEMENT_3D('',#53049,#53050,#53051); +#53049 = CARTESIAN_POINT('',(2.298480775301,0.84,0.742364817767)); +#53050 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#53051 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#53052 = ADVANCED_FACE('',(#53053),#53064,.T.); +#53053 = FACE_BOUND('',#53054,.T.); +#53054 = EDGE_LOOP('',(#53055,#53056,#53057,#53058)); +#53055 = ORIENTED_EDGE('',*,*,#50327,.T.); +#53056 = ORIENTED_EDGE('',*,*,#51398,.T.); +#53057 = ORIENTED_EDGE('',*,*,#50436,.F.); +#53058 = ORIENTED_EDGE('',*,*,#53059,.F.); +#53059 = EDGE_CURVE('',#50320,#50429,#53060,.T.); +#53060 = LINE('',#53061,#53062); +#53061 = CARTESIAN_POINT('',(2.495442325904,-0.43,0.7770944533)); +#53062 = VECTOR('',#53063,1.); +#53063 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53064 = CYLINDRICAL_SURFACE('',#53065,0.3); +#53065 = AXIS2_PLACEMENT_3D('',#53066,#53067,#53068); +#53066 = CARTESIAN_POINT('',(2.2,-0.43,0.725)); +#53067 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53068 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#53069 = ADVANCED_FACE('',(#53070),#53081,.F.); +#53070 = FACE_BOUND('',#53071,.F.); +#53071 = EDGE_LOOP('',(#53072,#53078,#53079,#53080)); +#53072 = ORIENTED_EDGE('',*,*,#53073,.T.); +#53073 = EDGE_CURVE('',#50311,#50420,#53074,.T.); +#53074 = LINE('',#53075,#53076); +#53075 = CARTESIAN_POINT('',(2.5764581915,-0.43,0.282635182233)); +#53076 = VECTOR('',#53077,1.); +#53077 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53078 = ORIENTED_EDGE('',*,*,#50428,.T.); +#53079 = ORIENTED_EDGE('',*,*,#53059,.F.); +#53080 = ORIENTED_EDGE('',*,*,#50319,.F.); +#53081 = PLANE('',#53082); +#53082 = AXIS2_PLACEMENT_3D('',#53083,#53084,#53085); +#53083 = CARTESIAN_POINT('',(2.5764581915,-0.43,0.282635182233)); +#53084 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#53085 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#53086 = ADVANCED_FACE('',(#53087),#53098,.F.); +#53087 = FACE_BOUND('',#53088,.F.); +#53088 = EDGE_LOOP('',(#53089,#53095,#53096,#53097)); +#53089 = ORIENTED_EDGE('',*,*,#53090,.T.); +#53090 = EDGE_CURVE('',#50303,#50412,#53091,.T.); +#53091 = LINE('',#53092,#53093); +#53092 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.2)); +#53093 = VECTOR('',#53094,1.); +#53094 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53095 = ORIENTED_EDGE('',*,*,#50419,.T.); +#53096 = ORIENTED_EDGE('',*,*,#53073,.F.); +#53097 = ORIENTED_EDGE('',*,*,#50310,.F.); +#53098 = CYLINDRICAL_SURFACE('',#53099,0.1); +#53099 = AXIS2_PLACEMENT_3D('',#53100,#53101,#53102); +#53100 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.3)); +#53101 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53102 = DIRECTION('',(0.,0.,-1.)); +#53103 = ADVANCED_FACE('',(#53104),#53115,.F.); +#53104 = FACE_BOUND('',#53105,.F.); +#53105 = EDGE_LOOP('',(#53106,#53112,#53113,#53114)); +#53106 = ORIENTED_EDGE('',*,*,#53107,.T.); +#53107 = EDGE_CURVE('',#50295,#50404,#53108,.T.); +#53108 = LINE('',#53109,#53110); +#53109 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#53110 = VECTOR('',#53111,1.); +#53111 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53112 = ORIENTED_EDGE('',*,*,#50411,.T.); +#53113 = ORIENTED_EDGE('',*,*,#53090,.F.); +#53114 = ORIENTED_EDGE('',*,*,#50302,.F.); +#53115 = PLANE('',#53116); +#53116 = AXIS2_PLACEMENT_3D('',#53117,#53118,#53119); +#53117 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#53118 = DIRECTION('',(0.,0.,-1.)); +#53119 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#53120 = ADVANCED_FACE('',(#53121),#53132,.F.); +#53121 = FACE_BOUND('',#53122,.F.); +#53122 = EDGE_LOOP('',(#53123,#53129,#53130,#53131)); +#53123 = ORIENTED_EDGE('',*,*,#53124,.T.); +#53124 = EDGE_CURVE('',#50287,#50396,#53125,.T.); +#53125 = LINE('',#53126,#53127); +#53126 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#53127 = VECTOR('',#53128,1.); +#53128 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53129 = ORIENTED_EDGE('',*,*,#50403,.T.); +#53130 = ORIENTED_EDGE('',*,*,#53107,.F.); +#53131 = ORIENTED_EDGE('',*,*,#50294,.F.); +#53132 = PLANE('',#53133); +#53133 = AXIS2_PLACEMENT_3D('',#53134,#53135,#53136); +#53134 = CARTESIAN_POINT('',(3.,-0.43,0.)); +#53135 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53136 = DIRECTION('',(0.,0.,1.)); +#53137 = ADVANCED_FACE('',(#53138),#53149,.F.); +#53138 = FACE_BOUND('',#53139,.F.); +#53139 = EDGE_LOOP('',(#53140,#53146,#53147,#53148)); +#53140 = ORIENTED_EDGE('',*,*,#53141,.T.); +#53141 = EDGE_CURVE('',#50278,#50387,#53142,.T.); +#53142 = LINE('',#53143,#53144); +#53143 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.)); +#53144 = VECTOR('',#53145,1.); +#53145 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53146 = ORIENTED_EDGE('',*,*,#50395,.T.); +#53147 = ORIENTED_EDGE('',*,*,#53124,.F.); +#53148 = ORIENTED_EDGE('',*,*,#50286,.F.); +#53149 = PLANE('',#53150); +#53150 = AXIS2_PLACEMENT_3D('',#53151,#53152,#53153); +#53151 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.)); +#53152 = DIRECTION('',(0.,0.,1.)); +#53153 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#53154 = ADVANCED_FACE('',(#53155),#53166,.T.); +#53155 = FACE_BOUND('',#53156,.T.); +#53156 = EDGE_LOOP('',(#53157,#53158,#53159,#53160)); +#53157 = ORIENTED_EDGE('',*,*,#50277,.T.); +#53158 = ORIENTED_EDGE('',*,*,#53141,.T.); +#53159 = ORIENTED_EDGE('',*,*,#50386,.F.); +#53160 = ORIENTED_EDGE('',*,*,#53161,.F.); +#53161 = EDGE_CURVE('',#50270,#50379,#53162,.T.); +#53162 = LINE('',#53163,#53164); +#53163 = CARTESIAN_POINT('',(2.379496640897,-0.43,0.2479055467)); +#53164 = VECTOR('',#53165,1.); +#53165 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53166 = CYLINDRICAL_SURFACE('',#53167,0.3); +#53167 = AXIS2_PLACEMENT_3D('',#53168,#53169,#53170); +#53168 = CARTESIAN_POINT('',(2.674938966801,-0.43,0.3)); +#53169 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53170 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#53171 = ADVANCED_FACE('',(#53172),#53178,.F.); +#53172 = FACE_BOUND('',#53173,.F.); +#53173 = EDGE_LOOP('',(#53174,#53175,#53176,#53177)); +#53174 = ORIENTED_EDGE('',*,*,#50360,.T.); +#53175 = ORIENTED_EDGE('',*,*,#50378,.T.); +#53176 = ORIENTED_EDGE('',*,*,#53161,.F.); +#53177 = ORIENTED_EDGE('',*,*,#50269,.F.); +#53178 = PLANE('',#53179); +#53179 = AXIS2_PLACEMENT_3D('',#53180,#53181,#53182); +#53180 = CARTESIAN_POINT('',(2.298480775301,-0.43,0.742364817767)); +#53181 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#53182 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#53183 = ADVANCED_FACE('',(#53184),#53195,.T.); +#53184 = FACE_BOUND('',#53185,.T.); +#53185 = EDGE_LOOP('',(#53186,#53187,#53188,#53189)); +#53186 = ORIENTED_EDGE('',*,*,#50550,.T.); +#53187 = ORIENTED_EDGE('',*,*,#51417,.T.); +#53188 = ORIENTED_EDGE('',*,*,#50659,.F.); +#53189 = ORIENTED_EDGE('',*,*,#53190,.F.); +#53190 = EDGE_CURVE('',#50543,#50652,#53191,.T.); +#53191 = LINE('',#53192,#53193); +#53192 = CARTESIAN_POINT('',(2.495442325904,-1.7,0.7770944533)); +#53193 = VECTOR('',#53194,1.); +#53194 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53195 = CYLINDRICAL_SURFACE('',#53196,0.3); +#53196 = AXIS2_PLACEMENT_3D('',#53197,#53198,#53199); +#53197 = CARTESIAN_POINT('',(2.2,-1.7,0.725)); +#53198 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53199 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#53200 = ADVANCED_FACE('',(#53201),#53212,.F.); +#53201 = FACE_BOUND('',#53202,.F.); +#53202 = EDGE_LOOP('',(#53203,#53209,#53210,#53211)); +#53203 = ORIENTED_EDGE('',*,*,#53204,.T.); +#53204 = EDGE_CURVE('',#50534,#50643,#53205,.T.); +#53205 = LINE('',#53206,#53207); +#53206 = CARTESIAN_POINT('',(2.5764581915,-1.7,0.282635182233)); +#53207 = VECTOR('',#53208,1.); +#53208 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53209 = ORIENTED_EDGE('',*,*,#50651,.T.); +#53210 = ORIENTED_EDGE('',*,*,#53190,.F.); +#53211 = ORIENTED_EDGE('',*,*,#50542,.F.); +#53212 = PLANE('',#53213); +#53213 = AXIS2_PLACEMENT_3D('',#53214,#53215,#53216); +#53214 = CARTESIAN_POINT('',(2.5764581915,-1.7,0.282635182233)); +#53215 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#53216 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#53217 = ADVANCED_FACE('',(#53218),#53229,.F.); +#53218 = FACE_BOUND('',#53219,.F.); +#53219 = EDGE_LOOP('',(#53220,#53226,#53227,#53228)); +#53220 = ORIENTED_EDGE('',*,*,#53221,.T.); +#53221 = EDGE_CURVE('',#50526,#50635,#53222,.T.); +#53222 = LINE('',#53223,#53224); +#53223 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.2)); +#53224 = VECTOR('',#53225,1.); +#53225 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53226 = ORIENTED_EDGE('',*,*,#50642,.T.); +#53227 = ORIENTED_EDGE('',*,*,#53204,.F.); +#53228 = ORIENTED_EDGE('',*,*,#50533,.F.); +#53229 = CYLINDRICAL_SURFACE('',#53230,0.1); +#53230 = AXIS2_PLACEMENT_3D('',#53231,#53232,#53233); +#53231 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.3)); +#53232 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53233 = DIRECTION('',(0.,0.,-1.)); +#53234 = ADVANCED_FACE('',(#53235),#53246,.F.); +#53235 = FACE_BOUND('',#53236,.F.); +#53236 = EDGE_LOOP('',(#53237,#53243,#53244,#53245)); +#53237 = ORIENTED_EDGE('',*,*,#53238,.T.); +#53238 = EDGE_CURVE('',#50518,#50627,#53239,.T.); +#53239 = LINE('',#53240,#53241); +#53240 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#53241 = VECTOR('',#53242,1.); +#53242 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53243 = ORIENTED_EDGE('',*,*,#50634,.T.); +#53244 = ORIENTED_EDGE('',*,*,#53221,.F.); +#53245 = ORIENTED_EDGE('',*,*,#50525,.F.); +#53246 = PLANE('',#53247); +#53247 = AXIS2_PLACEMENT_3D('',#53248,#53249,#53250); +#53248 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#53249 = DIRECTION('',(0.,0.,-1.)); +#53250 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#53251 = ADVANCED_FACE('',(#53252),#53263,.F.); +#53252 = FACE_BOUND('',#53253,.F.); +#53253 = EDGE_LOOP('',(#53254,#53260,#53261,#53262)); +#53254 = ORIENTED_EDGE('',*,*,#53255,.T.); +#53255 = EDGE_CURVE('',#50510,#50619,#53256,.T.); +#53256 = LINE('',#53257,#53258); +#53257 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#53258 = VECTOR('',#53259,1.); +#53259 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53260 = ORIENTED_EDGE('',*,*,#50626,.T.); +#53261 = ORIENTED_EDGE('',*,*,#53238,.F.); +#53262 = ORIENTED_EDGE('',*,*,#50517,.F.); +#53263 = PLANE('',#53264); +#53264 = AXIS2_PLACEMENT_3D('',#53265,#53266,#53267); +#53265 = CARTESIAN_POINT('',(3.,-1.7,0.)); +#53266 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53267 = DIRECTION('',(0.,0.,1.)); +#53268 = ADVANCED_FACE('',(#53269),#53280,.F.); +#53269 = FACE_BOUND('',#53270,.F.); +#53270 = EDGE_LOOP('',(#53271,#53277,#53278,#53279)); +#53271 = ORIENTED_EDGE('',*,*,#53272,.T.); +#53272 = EDGE_CURVE('',#50501,#50610,#53273,.T.); +#53273 = LINE('',#53274,#53275); +#53274 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.)); +#53275 = VECTOR('',#53276,1.); +#53276 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53277 = ORIENTED_EDGE('',*,*,#50618,.T.); +#53278 = ORIENTED_EDGE('',*,*,#53255,.F.); +#53279 = ORIENTED_EDGE('',*,*,#50509,.F.); +#53280 = PLANE('',#53281); +#53281 = AXIS2_PLACEMENT_3D('',#53282,#53283,#53284); +#53282 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.)); +#53283 = DIRECTION('',(0.,0.,1.)); +#53284 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#53285 = ADVANCED_FACE('',(#53286),#53297,.T.); +#53286 = FACE_BOUND('',#53287,.T.); +#53287 = EDGE_LOOP('',(#53288,#53289,#53290,#53291)); +#53288 = ORIENTED_EDGE('',*,*,#50500,.T.); +#53289 = ORIENTED_EDGE('',*,*,#53272,.T.); +#53290 = ORIENTED_EDGE('',*,*,#50609,.F.); +#53291 = ORIENTED_EDGE('',*,*,#53292,.F.); +#53292 = EDGE_CURVE('',#50493,#50602,#53293,.T.); +#53293 = LINE('',#53294,#53295); +#53294 = CARTESIAN_POINT('',(2.379496640897,-1.7,0.2479055467)); +#53295 = VECTOR('',#53296,1.); +#53296 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53297 = CYLINDRICAL_SURFACE('',#53298,0.3); +#53298 = AXIS2_PLACEMENT_3D('',#53299,#53300,#53301); +#53299 = CARTESIAN_POINT('',(2.674938966801,-1.7,0.3)); +#53300 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53301 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#53302 = ADVANCED_FACE('',(#53303),#53309,.F.); +#53303 = FACE_BOUND('',#53304,.F.); +#53304 = EDGE_LOOP('',(#53305,#53306,#53307,#53308)); +#53305 = ORIENTED_EDGE('',*,*,#50583,.T.); +#53306 = ORIENTED_EDGE('',*,*,#50601,.T.); +#53307 = ORIENTED_EDGE('',*,*,#53292,.F.); +#53308 = ORIENTED_EDGE('',*,*,#50492,.F.); +#53309 = PLANE('',#53310); +#53310 = AXIS2_PLACEMENT_3D('',#53311,#53312,#53313); +#53311 = CARTESIAN_POINT('',(2.298480775301,-1.7,0.742364817767)); +#53312 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#53313 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#53314 = ADVANCED_FACE('',(#53315),#53326,.T.); +#53315 = FACE_BOUND('',#53316,.T.); +#53316 = EDGE_LOOP('',(#53317,#53318,#53319,#53320)); +#53317 = ORIENTED_EDGE('',*,*,#50773,.T.); +#53318 = ORIENTED_EDGE('',*,*,#51436,.T.); +#53319 = ORIENTED_EDGE('',*,*,#50882,.F.); +#53320 = ORIENTED_EDGE('',*,*,#53321,.F.); +#53321 = EDGE_CURVE('',#50766,#50875,#53322,.T.); +#53322 = LINE('',#53323,#53324); +#53323 = CARTESIAN_POINT('',(2.495442325904,-2.97,0.7770944533)); +#53324 = VECTOR('',#53325,1.); +#53325 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53326 = CYLINDRICAL_SURFACE('',#53327,0.3); +#53327 = AXIS2_PLACEMENT_3D('',#53328,#53329,#53330); +#53328 = CARTESIAN_POINT('',(2.2,-2.97,0.725)); +#53329 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53330 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#53331 = ADVANCED_FACE('',(#53332),#53343,.F.); +#53332 = FACE_BOUND('',#53333,.F.); +#53333 = EDGE_LOOP('',(#53334,#53340,#53341,#53342)); +#53334 = ORIENTED_EDGE('',*,*,#53335,.T.); +#53335 = EDGE_CURVE('',#50757,#50866,#53336,.T.); +#53336 = LINE('',#53337,#53338); +#53337 = CARTESIAN_POINT('',(2.5764581915,-2.97,0.282635182233)); +#53338 = VECTOR('',#53339,1.); +#53339 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53340 = ORIENTED_EDGE('',*,*,#50874,.T.); +#53341 = ORIENTED_EDGE('',*,*,#53321,.F.); +#53342 = ORIENTED_EDGE('',*,*,#50765,.F.); +#53343 = PLANE('',#53344); +#53344 = AXIS2_PLACEMENT_3D('',#53345,#53346,#53347); +#53345 = CARTESIAN_POINT('',(2.5764581915,-2.97,0.282635182233)); +#53346 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#53347 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#53348 = ADVANCED_FACE('',(#53349),#53360,.F.); +#53349 = FACE_BOUND('',#53350,.F.); +#53350 = EDGE_LOOP('',(#53351,#53357,#53358,#53359)); +#53351 = ORIENTED_EDGE('',*,*,#53352,.T.); +#53352 = EDGE_CURVE('',#50749,#50858,#53353,.T.); +#53353 = LINE('',#53354,#53355); +#53354 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.2)); +#53355 = VECTOR('',#53356,1.); +#53356 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53357 = ORIENTED_EDGE('',*,*,#50865,.T.); +#53358 = ORIENTED_EDGE('',*,*,#53335,.F.); +#53359 = ORIENTED_EDGE('',*,*,#50756,.F.); +#53360 = CYLINDRICAL_SURFACE('',#53361,0.1); +#53361 = AXIS2_PLACEMENT_3D('',#53362,#53363,#53364); +#53362 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.3)); +#53363 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53364 = DIRECTION('',(0.,0.,-1.)); +#53365 = ADVANCED_FACE('',(#53366),#53377,.F.); +#53366 = FACE_BOUND('',#53367,.F.); +#53367 = EDGE_LOOP('',(#53368,#53374,#53375,#53376)); +#53368 = ORIENTED_EDGE('',*,*,#53369,.T.); +#53369 = EDGE_CURVE('',#50741,#50850,#53370,.T.); +#53370 = LINE('',#53371,#53372); +#53371 = CARTESIAN_POINT('',(3.,-2.97,0.2)); +#53372 = VECTOR('',#53373,1.); +#53373 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53374 = ORIENTED_EDGE('',*,*,#50857,.T.); +#53375 = ORIENTED_EDGE('',*,*,#53352,.F.); +#53376 = ORIENTED_EDGE('',*,*,#50748,.F.); +#53377 = PLANE('',#53378); +#53378 = AXIS2_PLACEMENT_3D('',#53379,#53380,#53381); +#53379 = CARTESIAN_POINT('',(3.,-2.97,0.2)); +#53380 = DIRECTION('',(0.,0.,-1.)); +#53381 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#53382 = ADVANCED_FACE('',(#53383),#53394,.F.); +#53383 = FACE_BOUND('',#53384,.F.); +#53384 = EDGE_LOOP('',(#53385,#53391,#53392,#53393)); +#53385 = ORIENTED_EDGE('',*,*,#53386,.T.); +#53386 = EDGE_CURVE('',#50733,#50842,#53387,.T.); +#53387 = LINE('',#53388,#53389); +#53388 = CARTESIAN_POINT('',(3.,-2.97,0.)); +#53389 = VECTOR('',#53390,1.); +#53390 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53391 = ORIENTED_EDGE('',*,*,#50849,.T.); +#53392 = ORIENTED_EDGE('',*,*,#53369,.F.); +#53393 = ORIENTED_EDGE('',*,*,#50740,.F.); +#53394 = PLANE('',#53395); +#53395 = AXIS2_PLACEMENT_3D('',#53396,#53397,#53398); +#53396 = CARTESIAN_POINT('',(3.,-2.97,0.)); +#53397 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53398 = DIRECTION('',(0.,0.,1.)); +#53399 = ADVANCED_FACE('',(#53400),#53411,.F.); +#53400 = FACE_BOUND('',#53401,.F.); +#53401 = EDGE_LOOP('',(#53402,#53408,#53409,#53410)); +#53402 = ORIENTED_EDGE('',*,*,#53403,.T.); +#53403 = EDGE_CURVE('',#50724,#50833,#53404,.T.); +#53404 = LINE('',#53405,#53406); +#53405 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.)); +#53406 = VECTOR('',#53407,1.); +#53407 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53408 = ORIENTED_EDGE('',*,*,#50841,.T.); +#53409 = ORIENTED_EDGE('',*,*,#53386,.F.); +#53410 = ORIENTED_EDGE('',*,*,#50732,.F.); +#53411 = PLANE('',#53412); +#53412 = AXIS2_PLACEMENT_3D('',#53413,#53414,#53415); +#53413 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.)); +#53414 = DIRECTION('',(0.,0.,1.)); +#53415 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#53416 = ADVANCED_FACE('',(#53417),#53428,.T.); +#53417 = FACE_BOUND('',#53418,.T.); +#53418 = EDGE_LOOP('',(#53419,#53420,#53421,#53422)); +#53419 = ORIENTED_EDGE('',*,*,#50723,.T.); +#53420 = ORIENTED_EDGE('',*,*,#53403,.T.); +#53421 = ORIENTED_EDGE('',*,*,#50832,.F.); +#53422 = ORIENTED_EDGE('',*,*,#53423,.F.); +#53423 = EDGE_CURVE('',#50716,#50825,#53424,.T.); +#53424 = LINE('',#53425,#53426); +#53425 = CARTESIAN_POINT('',(2.379496640897,-2.97,0.2479055467)); +#53426 = VECTOR('',#53427,1.); +#53427 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53428 = CYLINDRICAL_SURFACE('',#53429,0.3); +#53429 = AXIS2_PLACEMENT_3D('',#53430,#53431,#53432); +#53430 = CARTESIAN_POINT('',(2.674938966801,-2.97,0.3)); +#53431 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53432 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#53433 = ADVANCED_FACE('',(#53434),#53440,.F.); +#53434 = FACE_BOUND('',#53435,.F.); +#53435 = EDGE_LOOP('',(#53436,#53437,#53438,#53439)); +#53436 = ORIENTED_EDGE('',*,*,#50806,.T.); +#53437 = ORIENTED_EDGE('',*,*,#50824,.T.); +#53438 = ORIENTED_EDGE('',*,*,#53423,.F.); +#53439 = ORIENTED_EDGE('',*,*,#50715,.F.); +#53440 = PLANE('',#53441); +#53441 = AXIS2_PLACEMENT_3D('',#53442,#53443,#53444); +#53442 = CARTESIAN_POINT('',(2.298480775301,-2.97,0.742364817767)); +#53443 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#53444 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#53445 = ADVANCED_FACE('',(#53446),#53457,.T.); +#53446 = FACE_BOUND('',#53447,.T.); +#53447 = EDGE_LOOP('',(#53448,#53449,#53450,#53451)); +#53448 = ORIENTED_EDGE('',*,*,#50996,.T.); +#53449 = ORIENTED_EDGE('',*,*,#51455,.T.); +#53450 = ORIENTED_EDGE('',*,*,#51105,.F.); +#53451 = ORIENTED_EDGE('',*,*,#53452,.F.); +#53452 = EDGE_CURVE('',#50989,#51098,#53453,.T.); +#53453 = LINE('',#53454,#53455); +#53454 = CARTESIAN_POINT('',(2.495442325904,-4.24,0.7770944533)); +#53455 = VECTOR('',#53456,1.); +#53456 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53457 = CYLINDRICAL_SURFACE('',#53458,0.3); +#53458 = AXIS2_PLACEMENT_3D('',#53459,#53460,#53461); +#53459 = CARTESIAN_POINT('',(2.2,-4.24,0.725)); +#53460 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53461 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#53462 = ADVANCED_FACE('',(#53463),#53474,.F.); +#53463 = FACE_BOUND('',#53464,.F.); +#53464 = EDGE_LOOP('',(#53465,#53471,#53472,#53473)); +#53465 = ORIENTED_EDGE('',*,*,#53466,.T.); +#53466 = EDGE_CURVE('',#50980,#51089,#53467,.T.); +#53467 = LINE('',#53468,#53469); +#53468 = CARTESIAN_POINT('',(2.5764581915,-4.24,0.282635182233)); +#53469 = VECTOR('',#53470,1.); +#53470 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53471 = ORIENTED_EDGE('',*,*,#51097,.T.); +#53472 = ORIENTED_EDGE('',*,*,#53452,.F.); +#53473 = ORIENTED_EDGE('',*,*,#50988,.F.); +#53474 = PLANE('',#53475); +#53475 = AXIS2_PLACEMENT_3D('',#53476,#53477,#53478); +#53476 = CARTESIAN_POINT('',(2.5764581915,-4.24,0.282635182233)); +#53477 = DIRECTION('',(-0.986841372087,-1.095614012943E-16, + -0.161691392282)); +#53478 = DIRECTION('',(-0.161691392282,-1.795135065956E-17, + 0.986841372087)); +#53479 = ADVANCED_FACE('',(#53480),#53491,.F.); +#53480 = FACE_BOUND('',#53481,.F.); +#53481 = EDGE_LOOP('',(#53482,#53488,#53489,#53490)); +#53482 = ORIENTED_EDGE('',*,*,#53483,.T.); +#53483 = EDGE_CURVE('',#50972,#51081,#53484,.T.); +#53484 = LINE('',#53485,#53486); +#53485 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.2)); +#53486 = VECTOR('',#53487,1.); +#53487 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53488 = ORIENTED_EDGE('',*,*,#51088,.T.); +#53489 = ORIENTED_EDGE('',*,*,#53466,.F.); +#53490 = ORIENTED_EDGE('',*,*,#50979,.F.); +#53491 = CYLINDRICAL_SURFACE('',#53492,0.1); +#53492 = AXIS2_PLACEMENT_3D('',#53493,#53494,#53495); +#53493 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.3)); +#53494 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53495 = DIRECTION('',(0.,0.,-1.)); +#53496 = ADVANCED_FACE('',(#53497),#53508,.F.); +#53497 = FACE_BOUND('',#53498,.F.); +#53498 = EDGE_LOOP('',(#53499,#53505,#53506,#53507)); +#53499 = ORIENTED_EDGE('',*,*,#53500,.T.); +#53500 = EDGE_CURVE('',#50964,#51073,#53501,.T.); +#53501 = LINE('',#53502,#53503); +#53502 = CARTESIAN_POINT('',(3.,-4.24,0.2)); +#53503 = VECTOR('',#53504,1.); +#53504 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53505 = ORIENTED_EDGE('',*,*,#51080,.T.); +#53506 = ORIENTED_EDGE('',*,*,#53483,.F.); +#53507 = ORIENTED_EDGE('',*,*,#50971,.F.); +#53508 = PLANE('',#53509); +#53509 = AXIS2_PLACEMENT_3D('',#53510,#53511,#53512); +#53510 = CARTESIAN_POINT('',(3.,-4.24,0.2)); +#53511 = DIRECTION('',(0.,0.,-1.)); +#53512 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#53513 = ADVANCED_FACE('',(#53514),#53525,.F.); +#53514 = FACE_BOUND('',#53515,.F.); +#53515 = EDGE_LOOP('',(#53516,#53522,#53523,#53524)); +#53516 = ORIENTED_EDGE('',*,*,#53517,.T.); +#53517 = EDGE_CURVE('',#50956,#51065,#53518,.T.); +#53518 = LINE('',#53519,#53520); +#53519 = CARTESIAN_POINT('',(3.,-4.24,0.)); +#53520 = VECTOR('',#53521,1.); +#53521 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53522 = ORIENTED_EDGE('',*,*,#51072,.T.); +#53523 = ORIENTED_EDGE('',*,*,#53500,.F.); +#53524 = ORIENTED_EDGE('',*,*,#50963,.F.); +#53525 = PLANE('',#53526); +#53526 = AXIS2_PLACEMENT_3D('',#53527,#53528,#53529); +#53527 = CARTESIAN_POINT('',(3.,-4.24,0.)); +#53528 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53529 = DIRECTION('',(0.,0.,1.)); +#53530 = ADVANCED_FACE('',(#53531),#53542,.F.); +#53531 = FACE_BOUND('',#53532,.F.); +#53532 = EDGE_LOOP('',(#53533,#53539,#53540,#53541)); +#53533 = ORIENTED_EDGE('',*,*,#53534,.T.); +#53534 = EDGE_CURVE('',#50947,#51056,#53535,.T.); +#53535 = LINE('',#53536,#53537); +#53536 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.)); +#53537 = VECTOR('',#53538,1.); +#53538 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53539 = ORIENTED_EDGE('',*,*,#51064,.T.); +#53540 = ORIENTED_EDGE('',*,*,#53517,.F.); +#53541 = ORIENTED_EDGE('',*,*,#50955,.F.); +#53542 = PLANE('',#53543); +#53543 = AXIS2_PLACEMENT_3D('',#53544,#53545,#53546); +#53544 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.)); +#53545 = DIRECTION('',(0.,0.,1.)); +#53546 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#53547 = ADVANCED_FACE('',(#53548),#53559,.T.); +#53548 = FACE_BOUND('',#53549,.T.); +#53549 = EDGE_LOOP('',(#53550,#53551,#53552,#53553)); +#53550 = ORIENTED_EDGE('',*,*,#50946,.T.); +#53551 = ORIENTED_EDGE('',*,*,#53534,.T.); +#53552 = ORIENTED_EDGE('',*,*,#51055,.F.); +#53553 = ORIENTED_EDGE('',*,*,#53554,.F.); +#53554 = EDGE_CURVE('',#50939,#51048,#53555,.T.); +#53555 = LINE('',#53556,#53557); +#53556 = CARTESIAN_POINT('',(2.379496640897,-4.24,0.2479055467)); +#53557 = VECTOR('',#53558,1.); +#53558 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53559 = CYLINDRICAL_SURFACE('',#53560,0.3); +#53560 = AXIS2_PLACEMENT_3D('',#53561,#53562,#53563); +#53561 = CARTESIAN_POINT('',(2.674938966801,-4.24,0.3)); +#53562 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53563 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#53564 = ADVANCED_FACE('',(#53565),#53571,.F.); +#53565 = FACE_BOUND('',#53566,.F.); +#53566 = EDGE_LOOP('',(#53567,#53568,#53569,#53570)); +#53567 = ORIENTED_EDGE('',*,*,#51029,.T.); +#53568 = ORIENTED_EDGE('',*,*,#51047,.T.); +#53569 = ORIENTED_EDGE('',*,*,#53554,.F.); +#53570 = ORIENTED_EDGE('',*,*,#50938,.F.); +#53571 = PLANE('',#53572); +#53572 = AXIS2_PLACEMENT_3D('',#53573,#53574,#53575); +#53573 = CARTESIAN_POINT('',(2.298480775301,-4.24,0.742364817767)); +#53574 = DIRECTION('',(0.986841372087,1.095614012943E-16,0.161691392282) + ); +#53575 = DIRECTION('',(0.161691392282,1.795135065956E-17,-0.986841372087 + )); +#53576 = ADVANCED_FACE('',(#53577),#53580,.F.); +#53577 = FACE_BOUND('',#53578,.T.); +#53578 = EDGE_LOOP('',(#53579)); +#53579 = ORIENTED_EDGE('',*,*,#51307,.F.); +#53580 = PLANE('',#53581); +#53581 = AXIS2_PLACEMENT_3D('',#53582,#53583,#53584); +#53582 = CARTESIAN_POINT('',(-0.960171280765,3.960171280765,1.75)); +#53583 = DIRECTION('',(0.,0.,-1.)); +#53584 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#53589)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#53586,#53587,#53588)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#53586 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#53587 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#53588 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#53589 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#53586, + 'distance_accuracy_value','confusion accuracy'); +#53590 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#53591,#53593); +#53591 = ( REPRESENTATION_RELATIONSHIP('','',#45378,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#53592) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#53592 = ITEM_DEFINED_TRANSFORMATION('','',#11,#211); +#53593 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #53594); +#53594 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('50','U2','',#5,#45373,$); +#53595 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#45375)); +#53596 = SHAPE_DEFINITION_REPRESENTATION(#53597,#53603); +#53597 = PRODUCT_DEFINITION_SHAPE('','',#53598); +#53598 = PRODUCT_DEFINITION('design','',#53599,#53602); +#53599 = PRODUCT_DEFINITION_FORMATION('','',#53600); +#53600 = PRODUCT('SOT-223','SOT-223','',(#53601)); +#53601 = PRODUCT_CONTEXT('',#2,'mechanical'); +#53602 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#53603 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#53604),#55856); +#53604 = MANIFOLD_SOLID_BREP('',#53605); +#53605 = CLOSED_SHELL('',(#53606,#53692,#53723,#53746,#53776,#53807, + #53838,#53869,#53900,#53931,#53961,#53984,#54017,#54040,#54063, + #54119,#54211,#54303,#54320,#54351,#54443,#54535,#54552,#54583, + #54675,#54767,#54784,#54840,#54857,#54888,#54905,#54943,#54974, + #54997,#55041,#55060,#55077,#55094,#55111,#55128,#55145,#55162, + #55179,#55191,#55210,#55227,#55244,#55261,#55278,#55295,#55312, + #55329,#55341,#55360,#55377,#55394,#55411,#55428,#55445,#55462, + #55479,#55491,#55508,#55593,#55678,#55695,#55712,#55735,#55752, + #55769,#55786,#55803,#55820,#55837,#55849)); +#53606 = ADVANCED_FACE('',(#53607),#53687,.T.); +#53607 = FACE_BOUND('',#53608,.T.); +#53608 = EDGE_LOOP('',(#53609,#53619,#53626,#53634,#53642,#53650,#53658, + #53666,#53674,#53682)); +#53609 = ORIENTED_EDGE('',*,*,#53610,.T.); +#53610 = EDGE_CURVE('',#53611,#53613,#53615,.T.); +#53611 = VERTEX_POINT('',#53612); +#53612 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#53613 = VERTEX_POINT('',#53614); +#53614 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#53615 = LINE('',#53616,#53617); +#53616 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#53617 = VECTOR('',#53618,1.); +#53618 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53619 = ORIENTED_EDGE('',*,*,#53620,.T.); +#53620 = EDGE_CURVE('',#53613,#53621,#53623,.T.); +#53621 = VERTEX_POINT('',#53622); +#53622 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#53623 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53624,#53625),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53624 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#53625 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#53626 = ORIENTED_EDGE('',*,*,#53627,.F.); +#53627 = EDGE_CURVE('',#53628,#53621,#53630,.T.); +#53628 = VERTEX_POINT('',#53629); +#53629 = CARTESIAN_POINT('',(-1.75,-2.68345,0.765)); +#53630 = LINE('',#53631,#53632); +#53631 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53632 = VECTOR('',#53633,1.); +#53633 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53634 = ORIENTED_EDGE('',*,*,#53635,.F.); +#53635 = EDGE_CURVE('',#53636,#53628,#53638,.T.); +#53636 = VERTEX_POINT('',#53637); +#53637 = CARTESIAN_POINT('',(-1.75,-1.91675,0.765)); +#53638 = LINE('',#53639,#53640); +#53639 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53640 = VECTOR('',#53641,1.); +#53641 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53642 = ORIENTED_EDGE('',*,*,#53643,.F.); +#53643 = EDGE_CURVE('',#53644,#53636,#53646,.T.); +#53644 = VERTEX_POINT('',#53645); +#53645 = CARTESIAN_POINT('',(-1.75,-0.38335,0.765)); +#53646 = LINE('',#53647,#53648); +#53647 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53648 = VECTOR('',#53649,1.); +#53649 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53650 = ORIENTED_EDGE('',*,*,#53651,.F.); +#53651 = EDGE_CURVE('',#53652,#53644,#53654,.T.); +#53652 = VERTEX_POINT('',#53653); +#53653 = CARTESIAN_POINT('',(-1.75,0.38335,0.765)); +#53654 = LINE('',#53655,#53656); +#53655 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53656 = VECTOR('',#53657,1.); +#53657 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53658 = ORIENTED_EDGE('',*,*,#53659,.F.); +#53659 = EDGE_CURVE('',#53660,#53652,#53662,.T.); +#53660 = VERTEX_POINT('',#53661); +#53661 = CARTESIAN_POINT('',(-1.75,1.91675,0.765)); +#53662 = LINE('',#53663,#53664); +#53663 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53664 = VECTOR('',#53665,1.); +#53665 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53666 = ORIENTED_EDGE('',*,*,#53667,.F.); +#53667 = EDGE_CURVE('',#53668,#53660,#53670,.T.); +#53668 = VERTEX_POINT('',#53669); +#53669 = CARTESIAN_POINT('',(-1.75,2.68345,0.765)); +#53670 = LINE('',#53671,#53672); +#53671 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53672 = VECTOR('',#53673,1.); +#53673 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53674 = ORIENTED_EDGE('',*,*,#53675,.F.); +#53675 = EDGE_CURVE('',#53676,#53668,#53678,.T.); +#53676 = VERTEX_POINT('',#53677); +#53677 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53678 = LINE('',#53679,#53680); +#53679 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53680 = VECTOR('',#53681,1.); +#53681 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53682 = ORIENTED_EDGE('',*,*,#53683,.F.); +#53683 = EDGE_CURVE('',#53611,#53676,#53684,.T.); +#53684 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53685,#53686),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53685 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#53686 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53687 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53688,#53689) + ,(#53690,#53691 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53688 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#53689 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53690 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#53691 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#53692 = ADVANCED_FACE('',(#53693),#53718,.T.); +#53693 = FACE_BOUND('',#53694,.F.); +#53694 = EDGE_LOOP('',(#53695,#53696,#53704,#53712)); +#53695 = ORIENTED_EDGE('',*,*,#53610,.T.); +#53696 = ORIENTED_EDGE('',*,*,#53697,.T.); +#53697 = EDGE_CURVE('',#53613,#53698,#53700,.T.); +#53698 = VERTEX_POINT('',#53699); +#53699 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#53700 = LINE('',#53701,#53702); +#53701 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#53702 = VECTOR('',#53703,1.); +#53703 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53704 = ORIENTED_EDGE('',*,*,#53705,.T.); +#53705 = EDGE_CURVE('',#53698,#53706,#53708,.T.); +#53706 = VERTEX_POINT('',#53707); +#53707 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#53708 = LINE('',#53709,#53710); +#53709 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#53710 = VECTOR('',#53711,1.); +#53711 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53712 = ORIENTED_EDGE('',*,*,#53713,.T.); +#53713 = EDGE_CURVE('',#53706,#53611,#53714,.T.); +#53714 = LINE('',#53715,#53716); +#53715 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#53716 = VECTOR('',#53717,1.); +#53717 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53718 = PLANE('',#53719); +#53719 = AXIS2_PLACEMENT_3D('',#53720,#53721,#53722); +#53720 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#53721 = DIRECTION('',(0.,0.,-1.)); +#53722 = DIRECTION('',(0.464692418444,-0.885472165706,0.)); +#53723 = ADVANCED_FACE('',(#53724),#53741,.T.); +#53724 = FACE_BOUND('',#53725,.T.); +#53725 = EDGE_LOOP('',(#53726,#53727,#53734,#53740)); +#53726 = ORIENTED_EDGE('',*,*,#53697,.T.); +#53727 = ORIENTED_EDGE('',*,*,#53728,.T.); +#53728 = EDGE_CURVE('',#53698,#53729,#53731,.T.); +#53729 = VERTEX_POINT('',#53730); +#53730 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#53731 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53732,#53733),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53732 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#53733 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#53734 = ORIENTED_EDGE('',*,*,#53735,.F.); +#53735 = EDGE_CURVE('',#53621,#53729,#53736,.T.); +#53736 = LINE('',#53737,#53738); +#53737 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#53738 = VECTOR('',#53739,1.); +#53739 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#53740 = ORIENTED_EDGE('',*,*,#53620,.F.); +#53741 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53742,#53743) + ,(#53744,#53745 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53742 = CARTESIAN_POINT('',(-1.656540344923,-3.156540344923,0.1)); +#53743 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#53744 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#53745 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#53746 = ADVANCED_FACE('',(#53747),#53771,.T.); +#53747 = FACE_BOUND('',#53748,.T.); +#53748 = EDGE_LOOP('',(#53749,#53756,#53757,#53765)); +#53749 = ORIENTED_EDGE('',*,*,#53750,.F.); +#53750 = EDGE_CURVE('',#53676,#53751,#53753,.T.); +#53751 = VERTEX_POINT('',#53752); +#53752 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53753 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53754,#53755),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53754 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53755 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53756 = ORIENTED_EDGE('',*,*,#53675,.T.); +#53757 = ORIENTED_EDGE('',*,*,#53758,.F.); +#53758 = EDGE_CURVE('',#53759,#53668,#53761,.T.); +#53759 = VERTEX_POINT('',#53760); +#53760 = CARTESIAN_POINT('',(-1.75,2.68345,1.035)); +#53761 = LINE('',#53762,#53763); +#53762 = CARTESIAN_POINT('',(-1.75,2.68345,0.773709888363)); +#53763 = VECTOR('',#53764,1.); +#53764 = DIRECTION('',(0.,0.,-1.)); +#53765 = ORIENTED_EDGE('',*,*,#53766,.F.); +#53766 = EDGE_CURVE('',#53751,#53759,#53767,.T.); +#53767 = LINE('',#53768,#53769); +#53768 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53769 = VECTOR('',#53770,1.); +#53770 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53771 = PLANE('',#53772); +#53772 = AXIS2_PLACEMENT_3D('',#53773,#53774,#53775); +#53773 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53774 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53775 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53776 = ADVANCED_FACE('',(#53777),#53802,.F.); +#53777 = FACE_BOUND('',#53778,.F.); +#53778 = EDGE_LOOP('',(#53779,#53787,#53788,#53796)); +#53779 = ORIENTED_EDGE('',*,*,#53780,.F.); +#53780 = EDGE_CURVE('',#53660,#53781,#53783,.T.); +#53781 = VERTEX_POINT('',#53782); +#53782 = CARTESIAN_POINT('',(-2.25,1.91675,0.765)); +#53783 = LINE('',#53784,#53785); +#53784 = CARTESIAN_POINT('',(-1.72,1.91675,0.765)); +#53785 = VECTOR('',#53786,1.); +#53786 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53787 = ORIENTED_EDGE('',*,*,#53667,.F.); +#53788 = ORIENTED_EDGE('',*,*,#53789,.T.); +#53789 = EDGE_CURVE('',#53668,#53790,#53792,.T.); +#53790 = VERTEX_POINT('',#53791); +#53791 = CARTESIAN_POINT('',(-2.25,2.68345,0.765)); +#53792 = LINE('',#53793,#53794); +#53793 = CARTESIAN_POINT('',(-1.72,2.68345,0.765)); +#53794 = VECTOR('',#53795,1.); +#53795 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53796 = ORIENTED_EDGE('',*,*,#53797,.F.); +#53797 = EDGE_CURVE('',#53781,#53790,#53798,.T.); +#53798 = LINE('',#53799,#53800); +#53799 = CARTESIAN_POINT('',(-2.25,1.91675,0.765)); +#53800 = VECTOR('',#53801,1.); +#53801 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53802 = PLANE('',#53803); +#53803 = AXIS2_PLACEMENT_3D('',#53804,#53805,#53806); +#53804 = CARTESIAN_POINT('',(-1.72,1.91675,0.765)); +#53805 = DIRECTION('',(0.,0.,1.)); +#53806 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53807 = ADVANCED_FACE('',(#53808),#53833,.T.); +#53808 = FACE_BOUND('',#53809,.T.); +#53809 = EDGE_LOOP('',(#53810,#53818,#53819,#53827)); +#53810 = ORIENTED_EDGE('',*,*,#53811,.T.); +#53811 = EDGE_CURVE('',#53812,#53660,#53814,.T.); +#53812 = VERTEX_POINT('',#53813); +#53813 = CARTESIAN_POINT('',(-1.75,1.91675,1.035)); +#53814 = LINE('',#53815,#53816); +#53815 = CARTESIAN_POINT('',(-1.75,1.91675,0.773709888363)); +#53816 = VECTOR('',#53817,1.); +#53817 = DIRECTION('',(0.,0.,-1.)); +#53818 = ORIENTED_EDGE('',*,*,#53659,.T.); +#53819 = ORIENTED_EDGE('',*,*,#53820,.F.); +#53820 = EDGE_CURVE('',#53821,#53652,#53823,.T.); +#53821 = VERTEX_POINT('',#53822); +#53822 = CARTESIAN_POINT('',(-1.75,0.38335,1.035)); +#53823 = LINE('',#53824,#53825); +#53824 = CARTESIAN_POINT('',(-1.75,0.38335,0.773709888363)); +#53825 = VECTOR('',#53826,1.); +#53826 = DIRECTION('',(0.,0.,-1.)); +#53827 = ORIENTED_EDGE('',*,*,#53828,.F.); +#53828 = EDGE_CURVE('',#53812,#53821,#53829,.T.); +#53829 = LINE('',#53830,#53831); +#53830 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53831 = VECTOR('',#53832,1.); +#53832 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53833 = PLANE('',#53834); +#53834 = AXIS2_PLACEMENT_3D('',#53835,#53836,#53837); +#53835 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53836 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53837 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53838 = ADVANCED_FACE('',(#53839),#53864,.F.); +#53839 = FACE_BOUND('',#53840,.F.); +#53840 = EDGE_LOOP('',(#53841,#53849,#53850,#53858)); +#53841 = ORIENTED_EDGE('',*,*,#53842,.F.); +#53842 = EDGE_CURVE('',#53644,#53843,#53845,.T.); +#53843 = VERTEX_POINT('',#53844); +#53844 = CARTESIAN_POINT('',(-2.25,-0.38335,0.765)); +#53845 = LINE('',#53846,#53847); +#53846 = CARTESIAN_POINT('',(-1.72,-0.38335,0.765)); +#53847 = VECTOR('',#53848,1.); +#53848 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53849 = ORIENTED_EDGE('',*,*,#53651,.F.); +#53850 = ORIENTED_EDGE('',*,*,#53851,.T.); +#53851 = EDGE_CURVE('',#53652,#53852,#53854,.T.); +#53852 = VERTEX_POINT('',#53853); +#53853 = CARTESIAN_POINT('',(-2.25,0.38335,0.765)); +#53854 = LINE('',#53855,#53856); +#53855 = CARTESIAN_POINT('',(-1.72,0.38335,0.765)); +#53856 = VECTOR('',#53857,1.); +#53857 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53858 = ORIENTED_EDGE('',*,*,#53859,.F.); +#53859 = EDGE_CURVE('',#53843,#53852,#53860,.T.); +#53860 = LINE('',#53861,#53862); +#53861 = CARTESIAN_POINT('',(-2.25,-0.38335,0.765)); +#53862 = VECTOR('',#53863,1.); +#53863 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53864 = PLANE('',#53865); +#53865 = AXIS2_PLACEMENT_3D('',#53866,#53867,#53868); +#53866 = CARTESIAN_POINT('',(-1.72,-0.38335,0.765)); +#53867 = DIRECTION('',(0.,0.,1.)); +#53868 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53869 = ADVANCED_FACE('',(#53870),#53895,.T.); +#53870 = FACE_BOUND('',#53871,.T.); +#53871 = EDGE_LOOP('',(#53872,#53880,#53881,#53889)); +#53872 = ORIENTED_EDGE('',*,*,#53873,.T.); +#53873 = EDGE_CURVE('',#53874,#53644,#53876,.T.); +#53874 = VERTEX_POINT('',#53875); +#53875 = CARTESIAN_POINT('',(-1.75,-0.38335,1.035)); +#53876 = LINE('',#53877,#53878); +#53877 = CARTESIAN_POINT('',(-1.75,-0.38335,0.773709888363)); +#53878 = VECTOR('',#53879,1.); +#53879 = DIRECTION('',(0.,0.,-1.)); +#53880 = ORIENTED_EDGE('',*,*,#53643,.T.); +#53881 = ORIENTED_EDGE('',*,*,#53882,.F.); +#53882 = EDGE_CURVE('',#53883,#53636,#53885,.T.); +#53883 = VERTEX_POINT('',#53884); +#53884 = CARTESIAN_POINT('',(-1.75,-1.91675,1.035)); +#53885 = LINE('',#53886,#53887); +#53886 = CARTESIAN_POINT('',(-1.75,-1.91675,0.773709888363)); +#53887 = VECTOR('',#53888,1.); +#53888 = DIRECTION('',(0.,0.,-1.)); +#53889 = ORIENTED_EDGE('',*,*,#53890,.F.); +#53890 = EDGE_CURVE('',#53874,#53883,#53891,.T.); +#53891 = LINE('',#53892,#53893); +#53892 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53893 = VECTOR('',#53894,1.); +#53894 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53895 = PLANE('',#53896); +#53896 = AXIS2_PLACEMENT_3D('',#53897,#53898,#53899); +#53897 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53898 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53899 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53900 = ADVANCED_FACE('',(#53901),#53926,.F.); +#53901 = FACE_BOUND('',#53902,.F.); +#53902 = EDGE_LOOP('',(#53903,#53911,#53912,#53920)); +#53903 = ORIENTED_EDGE('',*,*,#53904,.F.); +#53904 = EDGE_CURVE('',#53628,#53905,#53907,.T.); +#53905 = VERTEX_POINT('',#53906); +#53906 = CARTESIAN_POINT('',(-2.25,-2.68345,0.765)); +#53907 = LINE('',#53908,#53909); +#53908 = CARTESIAN_POINT('',(-1.72,-2.68345,0.765)); +#53909 = VECTOR('',#53910,1.); +#53910 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53911 = ORIENTED_EDGE('',*,*,#53635,.F.); +#53912 = ORIENTED_EDGE('',*,*,#53913,.T.); +#53913 = EDGE_CURVE('',#53636,#53914,#53916,.T.); +#53914 = VERTEX_POINT('',#53915); +#53915 = CARTESIAN_POINT('',(-2.25,-1.91675,0.765)); +#53916 = LINE('',#53917,#53918); +#53917 = CARTESIAN_POINT('',(-1.72,-1.91675,0.765)); +#53918 = VECTOR('',#53919,1.); +#53919 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53920 = ORIENTED_EDGE('',*,*,#53921,.F.); +#53921 = EDGE_CURVE('',#53905,#53914,#53922,.T.); +#53922 = LINE('',#53923,#53924); +#53923 = CARTESIAN_POINT('',(-2.25,-2.68345,0.765)); +#53924 = VECTOR('',#53925,1.); +#53925 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#53926 = PLANE('',#53927); +#53927 = AXIS2_PLACEMENT_3D('',#53928,#53929,#53930); +#53928 = CARTESIAN_POINT('',(-1.72,-2.68345,0.765)); +#53929 = DIRECTION('',(0.,0.,1.)); +#53930 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#53931 = ADVANCED_FACE('',(#53932),#53956,.T.); +#53932 = FACE_BOUND('',#53933,.T.); +#53933 = EDGE_LOOP('',(#53934,#53942,#53943,#53950)); +#53934 = ORIENTED_EDGE('',*,*,#53935,.T.); +#53935 = EDGE_CURVE('',#53936,#53628,#53938,.T.); +#53936 = VERTEX_POINT('',#53937); +#53937 = CARTESIAN_POINT('',(-1.75,-2.68345,1.035)); +#53938 = LINE('',#53939,#53940); +#53939 = CARTESIAN_POINT('',(-1.75,-2.68345,0.773709888363)); +#53940 = VECTOR('',#53941,1.); +#53941 = DIRECTION('',(0.,0.,-1.)); +#53942 = ORIENTED_EDGE('',*,*,#53627,.T.); +#53943 = ORIENTED_EDGE('',*,*,#53944,.T.); +#53944 = EDGE_CURVE('',#53621,#53945,#53947,.T.); +#53945 = VERTEX_POINT('',#53946); +#53946 = CARTESIAN_POINT('',(-1.75,-3.25,1.035)); +#53947 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53948,#53949),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53948 = CARTESIAN_POINT('',(-1.75,-3.25,0.765)); +#53949 = CARTESIAN_POINT('',(-1.75,-3.25,1.035)); +#53950 = ORIENTED_EDGE('',*,*,#53951,.F.); +#53951 = EDGE_CURVE('',#53936,#53945,#53952,.T.); +#53952 = LINE('',#53953,#53954); +#53953 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53954 = VECTOR('',#53955,1.); +#53955 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53956 = PLANE('',#53957); +#53957 = AXIS2_PLACEMENT_3D('',#53958,#53959,#53960); +#53958 = CARTESIAN_POINT('',(-1.75,3.25,1.035)); +#53959 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53960 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#53961 = ADVANCED_FACE('',(#53962),#53979,.T.); +#53962 = FACE_BOUND('',#53963,.T.); +#53963 = EDGE_LOOP('',(#53964,#53965,#53966,#53974)); +#53964 = ORIENTED_EDGE('',*,*,#53713,.T.); +#53965 = ORIENTED_EDGE('',*,*,#53683,.T.); +#53966 = ORIENTED_EDGE('',*,*,#53967,.F.); +#53967 = EDGE_CURVE('',#53968,#53676,#53970,.T.); +#53968 = VERTEX_POINT('',#53969); +#53969 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#53970 = LINE('',#53971,#53972); +#53971 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#53972 = VECTOR('',#53973,1.); +#53973 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#53974 = ORIENTED_EDGE('',*,*,#53975,.F.); +#53975 = EDGE_CURVE('',#53706,#53968,#53976,.T.); +#53976 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#53977,#53978),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#53977 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#53978 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#53979 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#53980,#53981) + ,(#53982,#53983 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#53980 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#53981 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#53982 = CARTESIAN_POINT('',(-1.656540344923,3.156540344923,0.1)); +#53983 = CARTESIAN_POINT('',(-1.75,3.25,0.765)); +#53984 = ADVANCED_FACE('',(#53985),#54012,.T.); +#53985 = FACE_BOUND('',#53986,.T.); +#53986 = EDGE_LOOP('',(#53987,#53988,#53989,#53997,#54005,#54011)); +#53987 = ORIENTED_EDGE('',*,*,#53705,.T.); +#53988 = ORIENTED_EDGE('',*,*,#53975,.T.); +#53989 = ORIENTED_EDGE('',*,*,#53990,.F.); +#53990 = EDGE_CURVE('',#53991,#53968,#53993,.T.); +#53991 = VERTEX_POINT('',#53992); +#53992 = CARTESIAN_POINT('',(1.75,1.15005,0.765)); +#53993 = LINE('',#53994,#53995); +#53994 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#53995 = VECTOR('',#53996,1.); +#53996 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#53997 = ORIENTED_EDGE('',*,*,#53998,.F.); +#53998 = EDGE_CURVE('',#53999,#53991,#54001,.T.); +#53999 = VERTEX_POINT('',#54000); +#54000 = CARTESIAN_POINT('',(1.75,-1.15005,0.765)); +#54001 = LINE('',#54002,#54003); +#54002 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#54003 = VECTOR('',#54004,1.); +#54004 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54005 = ORIENTED_EDGE('',*,*,#54006,.F.); +#54006 = EDGE_CURVE('',#53729,#53999,#54007,.T.); +#54007 = LINE('',#54008,#54009); +#54008 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#54009 = VECTOR('',#54010,1.); +#54010 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54011 = ORIENTED_EDGE('',*,*,#53728,.F.); +#54012 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54013,#54014) + ,(#54015,#54016 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.5),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#54013 = CARTESIAN_POINT('',(1.656540344923,-3.156540344923,0.1)); +#54014 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#54015 = CARTESIAN_POINT('',(1.656540344923,3.156540344923,0.1)); +#54016 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#54017 = ADVANCED_FACE('',(#54018),#54035,.T.); +#54018 = FACE_BOUND('',#54019,.T.); +#54019 = EDGE_LOOP('',(#54020,#54021,#54028,#54034)); +#54020 = ORIENTED_EDGE('',*,*,#53735,.T.); +#54021 = ORIENTED_EDGE('',*,*,#54022,.T.); +#54022 = EDGE_CURVE('',#53729,#54023,#54025,.T.); +#54023 = VERTEX_POINT('',#54024); +#54024 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#54025 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54026,#54027),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54026 = CARTESIAN_POINT('',(1.75,-3.25,0.765)); +#54027 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#54028 = ORIENTED_EDGE('',*,*,#54029,.F.); +#54029 = EDGE_CURVE('',#53945,#54023,#54030,.T.); +#54030 = LINE('',#54031,#54032); +#54031 = CARTESIAN_POINT('',(-1.75,-3.25,1.035)); +#54032 = VECTOR('',#54033,1.); +#54033 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54034 = ORIENTED_EDGE('',*,*,#53944,.F.); +#54035 = PLANE('',#54036); +#54036 = AXIS2_PLACEMENT_3D('',#54037,#54038,#54039); +#54037 = CARTESIAN_POINT('',(-1.75,-3.25,1.035)); +#54038 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54039 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54040 = ADVANCED_FACE('',(#54041),#54058,.T.); +#54041 = FACE_BOUND('',#54042,.T.); +#54042 = EDGE_LOOP('',(#54043,#54044,#54045,#54053)); +#54043 = ORIENTED_EDGE('',*,*,#53967,.T.); +#54044 = ORIENTED_EDGE('',*,*,#53750,.T.); +#54045 = ORIENTED_EDGE('',*,*,#54046,.F.); +#54046 = EDGE_CURVE('',#54047,#53751,#54049,.T.); +#54047 = VERTEX_POINT('',#54048); +#54048 = CARTESIAN_POINT('',(1.75,3.25,1.035)); +#54049 = LINE('',#54050,#54051); +#54050 = CARTESIAN_POINT('',(1.75,3.25,1.035)); +#54051 = VECTOR('',#54052,1.); +#54052 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54053 = ORIENTED_EDGE('',*,*,#54054,.F.); +#54054 = EDGE_CURVE('',#53968,#54047,#54055,.T.); +#54055 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54056,#54057),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54056 = CARTESIAN_POINT('',(1.75,3.25,0.765)); +#54057 = CARTESIAN_POINT('',(1.75,3.25,1.035)); +#54058 = PLANE('',#54059); +#54059 = AXIS2_PLACEMENT_3D('',#54060,#54061,#54062); +#54060 = CARTESIAN_POINT('',(1.75,3.25,1.035)); +#54061 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54062 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54063 = ADVANCED_FACE('',(#54064),#54114,.T.); +#54064 = FACE_BOUND('',#54065,.T.); +#54065 = EDGE_LOOP('',(#54066,#54067,#54068,#54076,#54084,#54092,#54100, + #54108)); +#54066 = ORIENTED_EDGE('',*,*,#54046,.T.); +#54067 = ORIENTED_EDGE('',*,*,#53766,.T.); +#54068 = ORIENTED_EDGE('',*,*,#54069,.T.); +#54069 = EDGE_CURVE('',#53759,#54070,#54072,.T.); +#54070 = VERTEX_POINT('',#54071); +#54071 = CARTESIAN_POINT('',(-1.735,2.68345,1.035)); +#54072 = LINE('',#54073,#54074); +#54073 = CARTESIAN_POINT('',(-2.25,2.68345,1.035)); +#54074 = VECTOR('',#54075,1.); +#54075 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54076 = ORIENTED_EDGE('',*,*,#54077,.F.); +#54077 = EDGE_CURVE('',#54078,#54070,#54080,.T.); +#54078 = VERTEX_POINT('',#54079); +#54079 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#54080 = LINE('',#54081,#54082); +#54081 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#54082 = VECTOR('',#54083,1.); +#54083 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54084 = ORIENTED_EDGE('',*,*,#54085,.F.); +#54085 = EDGE_CURVE('',#54086,#54078,#54088,.T.); +#54086 = VERTEX_POINT('',#54087); +#54087 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#54088 = LINE('',#54089,#54090); +#54089 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#54090 = VECTOR('',#54091,1.); +#54091 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54092 = ORIENTED_EDGE('',*,*,#54093,.F.); +#54093 = EDGE_CURVE('',#54094,#54086,#54096,.T.); +#54094 = VERTEX_POINT('',#54095); +#54095 = CARTESIAN_POINT('',(1.735,1.15005,1.035)); +#54096 = LINE('',#54097,#54098); +#54097 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#54098 = VECTOR('',#54099,1.); +#54099 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54100 = ORIENTED_EDGE('',*,*,#54101,.F.); +#54101 = EDGE_CURVE('',#54102,#54094,#54104,.T.); +#54102 = VERTEX_POINT('',#54103); +#54103 = CARTESIAN_POINT('',(1.75,1.15005,1.035)); +#54104 = LINE('',#54105,#54106); +#54105 = CARTESIAN_POINT('',(2.25,1.15005,1.035)); +#54106 = VECTOR('',#54107,1.); +#54107 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54108 = ORIENTED_EDGE('',*,*,#54109,.T.); +#54109 = EDGE_CURVE('',#54102,#54047,#54110,.T.); +#54110 = LINE('',#54111,#54112); +#54111 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#54112 = VECTOR('',#54113,1.); +#54113 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54114 = PLANE('',#54115); +#54115 = AXIS2_PLACEMENT_3D('',#54116,#54117,#54118); +#54116 = CARTESIAN_POINT('',(-1.7425,-3.732941412364E-16,1.035)); +#54117 = DIRECTION('',(-2.496972947931E-25,-3.410490578954E-32,1.)); +#54118 = DIRECTION('',(1.025679957475E-16,-1.,-3.410490576393E-32)); +#54119 = ADVANCED_FACE('',(#54120),#54206,.T.); +#54120 = FACE_BOUND('',#54121,.T.); +#54121 = EDGE_LOOP('',(#54122,#54123,#54124,#54133,#54141,#54150,#54158, + #54166,#54174,#54183,#54191,#54200)); +#54122 = ORIENTED_EDGE('',*,*,#53758,.T.); +#54123 = ORIENTED_EDGE('',*,*,#53789,.T.); +#54124 = ORIENTED_EDGE('',*,*,#54125,.T.); +#54125 = EDGE_CURVE('',#53790,#54126,#54128,.T.); +#54126 = VERTEX_POINT('',#54127); +#54127 = CARTESIAN_POINT('',(-2.446961550602,2.68345,0.599729635533)); +#54128 = CIRCLE('',#54129,0.2); +#54129 = AXIS2_PLACEMENT_3D('',#54130,#54131,#54132); +#54130 = CARTESIAN_POINT('',(-2.25,2.68345,0.565)); +#54131 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54132 = DIRECTION('',(0.,0.,1.)); +#54133 = ORIENTED_EDGE('',*,*,#54134,.T.); +#54134 = EDGE_CURVE('',#54126,#54135,#54137,.T.); +#54135 = VERTEX_POINT('',#54136); +#54136 = CARTESIAN_POINT('',(-2.473891419252,2.68345,0.388385356497)); +#54137 = LINE('',#54138,#54139); +#54138 = CARTESIAN_POINT('',(-2.446961550602,2.68345,0.599729635533)); +#54139 = VECTOR('',#54140,1.); +#54140 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#54141 = ORIENTED_EDGE('',*,*,#54142,.T.); +#54142 = EDGE_CURVE('',#54135,#54143,#54145,.T.); +#54143 = VERTEX_POINT('',#54144); +#54144 = CARTESIAN_POINT('',(-2.936751063167,2.68345,-1.665334536938E-16 + )); +#54145 = CIRCLE('',#54146,0.47); +#54146 = AXIS2_PLACEMENT_3D('',#54147,#54148,#54149); +#54147 = CARTESIAN_POINT('',(-2.936751063167,2.68345,0.47)); +#54148 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#54149 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#54150 = ORIENTED_EDGE('',*,*,#54151,.T.); +#54151 = EDGE_CURVE('',#54143,#54152,#54154,.T.); +#54152 = VERTEX_POINT('',#54153); +#54153 = CARTESIAN_POINT('',(-3.5,2.68345,-1.665334536938E-16)); +#54154 = LINE('',#54155,#54156); +#54155 = CARTESIAN_POINT('',(-2.936751063167,2.68345,-1.665334536938E-16 + )); +#54156 = VECTOR('',#54157,1.); +#54157 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54158 = ORIENTED_EDGE('',*,*,#54159,.T.); +#54159 = EDGE_CURVE('',#54152,#54160,#54162,.T.); +#54160 = VERTEX_POINT('',#54161); +#54161 = CARTESIAN_POINT('',(-3.5,2.68345,0.27)); +#54162 = LINE('',#54163,#54164); +#54163 = CARTESIAN_POINT('',(-3.5,2.68345,-1.665334536938E-16)); +#54164 = VECTOR('',#54165,1.); +#54165 = DIRECTION('',(0.,0.,1.)); +#54166 = ORIENTED_EDGE('',*,*,#54167,.T.); +#54167 = EDGE_CURVE('',#54160,#54168,#54170,.T.); +#54168 = VERTEX_POINT('',#54169); +#54169 = CARTESIAN_POINT('',(-2.936751063167,2.68345,0.27)); +#54170 = LINE('',#54171,#54172); +#54171 = CARTESIAN_POINT('',(-3.5,2.68345,0.27)); +#54172 = VECTOR('',#54173,1.); +#54173 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54174 = ORIENTED_EDGE('',*,*,#54175,.T.); +#54175 = EDGE_CURVE('',#54168,#54176,#54178,.T.); +#54176 = VERTEX_POINT('',#54177); +#54177 = CARTESIAN_POINT('',(-2.739789512565,2.68345,0.435270364467)); +#54178 = CIRCLE('',#54179,0.2); +#54179 = AXIS2_PLACEMENT_3D('',#54180,#54181,#54182); +#54180 = CARTESIAN_POINT('',(-2.936751063167,2.68345,0.47)); +#54181 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54182 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#54183 = ORIENTED_EDGE('',*,*,#54184,.T.); +#54184 = EDGE_CURVE('',#54176,#54185,#54187,.T.); +#54185 = VERTEX_POINT('',#54186); +#54186 = CARTESIAN_POINT('',(-2.712859643916,2.68345,0.646614643503)); +#54187 = LINE('',#54188,#54189); +#54188 = CARTESIAN_POINT('',(-2.739789512565,2.68345,0.435270364467)); +#54189 = VECTOR('',#54190,1.); +#54190 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#54191 = ORIENTED_EDGE('',*,*,#54192,.T.); +#54192 = EDGE_CURVE('',#54185,#54193,#54195,.T.); +#54193 = VERTEX_POINT('',#54194); +#54194 = CARTESIAN_POINT('',(-2.25,2.68345,1.035)); +#54195 = CIRCLE('',#54196,0.47); +#54196 = AXIS2_PLACEMENT_3D('',#54197,#54198,#54199); +#54197 = CARTESIAN_POINT('',(-2.25,2.68345,0.565)); +#54198 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#54199 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#54200 = ORIENTED_EDGE('',*,*,#54201,.T.); +#54201 = EDGE_CURVE('',#54193,#53759,#54202,.T.); +#54202 = LINE('',#54203,#54204); +#54203 = CARTESIAN_POINT('',(-2.25,2.68345,1.035)); +#54204 = VECTOR('',#54205,1.); +#54205 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54206 = PLANE('',#54207); +#54207 = AXIS2_PLACEMENT_3D('',#54208,#54209,#54210); +#54208 = CARTESIAN_POINT('',(-2.606989201797,2.68345,0.512419776725)); +#54209 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54210 = DIRECTION('',(0.,-0.,1.)); +#54211 = ADVANCED_FACE('',(#54212),#54298,.F.); +#54212 = FACE_BOUND('',#54213,.F.); +#54213 = EDGE_LOOP('',(#54214,#54215,#54216,#54225,#54233,#54242,#54250, + #54258,#54266,#54275,#54283,#54292)); +#54214 = ORIENTED_EDGE('',*,*,#53811,.T.); +#54215 = ORIENTED_EDGE('',*,*,#53780,.T.); +#54216 = ORIENTED_EDGE('',*,*,#54217,.T.); +#54217 = EDGE_CURVE('',#53781,#54218,#54220,.T.); +#54218 = VERTEX_POINT('',#54219); +#54219 = CARTESIAN_POINT('',(-2.446961550602,1.91675,0.599729635533)); +#54220 = CIRCLE('',#54221,0.2); +#54221 = AXIS2_PLACEMENT_3D('',#54222,#54223,#54224); +#54222 = CARTESIAN_POINT('',(-2.25,1.91675,0.565)); +#54223 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54224 = DIRECTION('',(0.,0.,1.)); +#54225 = ORIENTED_EDGE('',*,*,#54226,.T.); +#54226 = EDGE_CURVE('',#54218,#54227,#54229,.T.); +#54227 = VERTEX_POINT('',#54228); +#54228 = CARTESIAN_POINT('',(-2.473891419252,1.91675,0.388385356497)); +#54229 = LINE('',#54230,#54231); +#54230 = CARTESIAN_POINT('',(-2.446961550602,1.91675,0.599729635533)); +#54231 = VECTOR('',#54232,1.); +#54232 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#54233 = ORIENTED_EDGE('',*,*,#54234,.T.); +#54234 = EDGE_CURVE('',#54227,#54235,#54237,.T.); +#54235 = VERTEX_POINT('',#54236); +#54236 = CARTESIAN_POINT('',(-2.936751063167,1.91675,-1.665334536938E-16 + )); +#54237 = CIRCLE('',#54238,0.47); +#54238 = AXIS2_PLACEMENT_3D('',#54239,#54240,#54241); +#54239 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.47)); +#54240 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#54241 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#54242 = ORIENTED_EDGE('',*,*,#54243,.T.); +#54243 = EDGE_CURVE('',#54235,#54244,#54246,.T.); +#54244 = VERTEX_POINT('',#54245); +#54245 = CARTESIAN_POINT('',(-3.5,1.91675,-1.665334536938E-16)); +#54246 = LINE('',#54247,#54248); +#54247 = CARTESIAN_POINT('',(-2.936751063167,1.91675,-1.665334536938E-16 + )); +#54248 = VECTOR('',#54249,1.); +#54249 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54250 = ORIENTED_EDGE('',*,*,#54251,.T.); +#54251 = EDGE_CURVE('',#54244,#54252,#54254,.T.); +#54252 = VERTEX_POINT('',#54253); +#54253 = CARTESIAN_POINT('',(-3.5,1.91675,0.27)); +#54254 = LINE('',#54255,#54256); +#54255 = CARTESIAN_POINT('',(-3.5,1.91675,-1.665334536938E-16)); +#54256 = VECTOR('',#54257,1.); +#54257 = DIRECTION('',(0.,0.,1.)); +#54258 = ORIENTED_EDGE('',*,*,#54259,.T.); +#54259 = EDGE_CURVE('',#54252,#54260,#54262,.T.); +#54260 = VERTEX_POINT('',#54261); +#54261 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.27)); +#54262 = LINE('',#54263,#54264); +#54263 = CARTESIAN_POINT('',(-3.5,1.91675,0.27)); +#54264 = VECTOR('',#54265,1.); +#54265 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54266 = ORIENTED_EDGE('',*,*,#54267,.T.); +#54267 = EDGE_CURVE('',#54260,#54268,#54270,.T.); +#54268 = VERTEX_POINT('',#54269); +#54269 = CARTESIAN_POINT('',(-2.739789512565,1.91675,0.435270364467)); +#54270 = CIRCLE('',#54271,0.2); +#54271 = AXIS2_PLACEMENT_3D('',#54272,#54273,#54274); +#54272 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.47)); +#54273 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54274 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#54275 = ORIENTED_EDGE('',*,*,#54276,.T.); +#54276 = EDGE_CURVE('',#54268,#54277,#54279,.T.); +#54277 = VERTEX_POINT('',#54278); +#54278 = CARTESIAN_POINT('',(-2.712859643916,1.91675,0.646614643503)); +#54279 = LINE('',#54280,#54281); +#54280 = CARTESIAN_POINT('',(-2.739789512565,1.91675,0.435270364467)); +#54281 = VECTOR('',#54282,1.); +#54282 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#54283 = ORIENTED_EDGE('',*,*,#54284,.T.); +#54284 = EDGE_CURVE('',#54277,#54285,#54287,.T.); +#54285 = VERTEX_POINT('',#54286); +#54286 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#54287 = CIRCLE('',#54288,0.47); +#54288 = AXIS2_PLACEMENT_3D('',#54289,#54290,#54291); +#54289 = CARTESIAN_POINT('',(-2.25,1.91675,0.565)); +#54290 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#54291 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#54292 = ORIENTED_EDGE('',*,*,#54293,.T.); +#54293 = EDGE_CURVE('',#54285,#53812,#54294,.T.); +#54294 = LINE('',#54295,#54296); +#54295 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#54296 = VECTOR('',#54297,1.); +#54297 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54298 = PLANE('',#54299); +#54299 = AXIS2_PLACEMENT_3D('',#54300,#54301,#54302); +#54300 = CARTESIAN_POINT('',(-2.606989201797,1.91675,0.512419776725)); +#54301 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54302 = DIRECTION('',(0.,-0.,1.)); +#54303 = ADVANCED_FACE('',(#54304),#54315,.F.); +#54304 = FACE_BOUND('',#54305,.F.); +#54305 = EDGE_LOOP('',(#54306,#54307,#54308,#54314)); +#54306 = ORIENTED_EDGE('',*,*,#53797,.T.); +#54307 = ORIENTED_EDGE('',*,*,#54125,.T.); +#54308 = ORIENTED_EDGE('',*,*,#54309,.F.); +#54309 = EDGE_CURVE('',#54218,#54126,#54310,.T.); +#54310 = LINE('',#54311,#54312); +#54311 = CARTESIAN_POINT('',(-2.446961550602,1.91675,0.599729635533)); +#54312 = VECTOR('',#54313,1.); +#54313 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54314 = ORIENTED_EDGE('',*,*,#54217,.F.); +#54315 = CYLINDRICAL_SURFACE('',#54316,0.2); +#54316 = AXIS2_PLACEMENT_3D('',#54317,#54318,#54319); +#54317 = CARTESIAN_POINT('',(-2.25,1.91675,0.565)); +#54318 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54319 = DIRECTION('',(0.,0.,1.)); +#54320 = ADVANCED_FACE('',(#54321),#54346,.T.); +#54321 = FACE_BOUND('',#54322,.T.); +#54322 = EDGE_LOOP('',(#54323,#54331,#54332,#54340)); +#54323 = ORIENTED_EDGE('',*,*,#54324,.F.); +#54324 = EDGE_CURVE('',#53812,#54325,#54327,.T.); +#54325 = VERTEX_POINT('',#54326); +#54326 = CARTESIAN_POINT('',(-1.735,1.91675,1.035)); +#54327 = LINE('',#54328,#54329); +#54328 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#54329 = VECTOR('',#54330,1.); +#54330 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54331 = ORIENTED_EDGE('',*,*,#53828,.T.); +#54332 = ORIENTED_EDGE('',*,*,#54333,.T.); +#54333 = EDGE_CURVE('',#53821,#54334,#54336,.T.); +#54334 = VERTEX_POINT('',#54335); +#54335 = CARTESIAN_POINT('',(-1.735,0.38335,1.035)); +#54336 = LINE('',#54337,#54338); +#54337 = CARTESIAN_POINT('',(-2.25,0.38335,1.035)); +#54338 = VECTOR('',#54339,1.); +#54339 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54340 = ORIENTED_EDGE('',*,*,#54341,.F.); +#54341 = EDGE_CURVE('',#54325,#54334,#54342,.T.); +#54342 = LINE('',#54343,#54344); +#54343 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#54344 = VECTOR('',#54345,1.); +#54345 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54346 = PLANE('',#54347); +#54347 = AXIS2_PLACEMENT_3D('',#54348,#54349,#54350); +#54348 = CARTESIAN_POINT('',(-1.7425,-3.732941412364E-16,1.035)); +#54349 = DIRECTION('',(-2.496972947931E-25,-3.410490578954E-32,1.)); +#54350 = DIRECTION('',(1.025679957475E-16,-1.,-3.410490576393E-32)); +#54351 = ADVANCED_FACE('',(#54352),#54438,.T.); +#54352 = FACE_BOUND('',#54353,.T.); +#54353 = EDGE_LOOP('',(#54354,#54355,#54356,#54365,#54373,#54382,#54390, + #54398,#54406,#54415,#54423,#54432)); +#54354 = ORIENTED_EDGE('',*,*,#53820,.T.); +#54355 = ORIENTED_EDGE('',*,*,#53851,.T.); +#54356 = ORIENTED_EDGE('',*,*,#54357,.T.); +#54357 = EDGE_CURVE('',#53852,#54358,#54360,.T.); +#54358 = VERTEX_POINT('',#54359); +#54359 = CARTESIAN_POINT('',(-2.446961550602,0.38335,0.599729635533)); +#54360 = CIRCLE('',#54361,0.2); +#54361 = AXIS2_PLACEMENT_3D('',#54362,#54363,#54364); +#54362 = CARTESIAN_POINT('',(-2.25,0.38335,0.565)); +#54363 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54364 = DIRECTION('',(0.,0.,1.)); +#54365 = ORIENTED_EDGE('',*,*,#54366,.T.); +#54366 = EDGE_CURVE('',#54358,#54367,#54369,.T.); +#54367 = VERTEX_POINT('',#54368); +#54368 = CARTESIAN_POINT('',(-2.473891419252,0.38335,0.388385356497)); +#54369 = LINE('',#54370,#54371); +#54370 = CARTESIAN_POINT('',(-2.446961550602,0.38335,0.599729635533)); +#54371 = VECTOR('',#54372,1.); +#54372 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#54373 = ORIENTED_EDGE('',*,*,#54374,.T.); +#54374 = EDGE_CURVE('',#54367,#54375,#54377,.T.); +#54375 = VERTEX_POINT('',#54376); +#54376 = CARTESIAN_POINT('',(-2.936751063167,0.38335,-1.665334536938E-16 + )); +#54377 = CIRCLE('',#54378,0.47); +#54378 = AXIS2_PLACEMENT_3D('',#54379,#54380,#54381); +#54379 = CARTESIAN_POINT('',(-2.936751063167,0.38335,0.47)); +#54380 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#54381 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#54382 = ORIENTED_EDGE('',*,*,#54383,.T.); +#54383 = EDGE_CURVE('',#54375,#54384,#54386,.T.); +#54384 = VERTEX_POINT('',#54385); +#54385 = CARTESIAN_POINT('',(-3.5,0.38335,-1.665334536938E-16)); +#54386 = LINE('',#54387,#54388); +#54387 = CARTESIAN_POINT('',(-2.936751063167,0.38335,-1.665334536938E-16 + )); +#54388 = VECTOR('',#54389,1.); +#54389 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54390 = ORIENTED_EDGE('',*,*,#54391,.T.); +#54391 = EDGE_CURVE('',#54384,#54392,#54394,.T.); +#54392 = VERTEX_POINT('',#54393); +#54393 = CARTESIAN_POINT('',(-3.5,0.38335,0.27)); +#54394 = LINE('',#54395,#54396); +#54395 = CARTESIAN_POINT('',(-3.5,0.38335,-1.665334536938E-16)); +#54396 = VECTOR('',#54397,1.); +#54397 = DIRECTION('',(0.,0.,1.)); +#54398 = ORIENTED_EDGE('',*,*,#54399,.T.); +#54399 = EDGE_CURVE('',#54392,#54400,#54402,.T.); +#54400 = VERTEX_POINT('',#54401); +#54401 = CARTESIAN_POINT('',(-2.936751063167,0.38335,0.27)); +#54402 = LINE('',#54403,#54404); +#54403 = CARTESIAN_POINT('',(-3.5,0.38335,0.27)); +#54404 = VECTOR('',#54405,1.); +#54405 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54406 = ORIENTED_EDGE('',*,*,#54407,.T.); +#54407 = EDGE_CURVE('',#54400,#54408,#54410,.T.); +#54408 = VERTEX_POINT('',#54409); +#54409 = CARTESIAN_POINT('',(-2.739789512565,0.38335,0.435270364467)); +#54410 = CIRCLE('',#54411,0.2); +#54411 = AXIS2_PLACEMENT_3D('',#54412,#54413,#54414); +#54412 = CARTESIAN_POINT('',(-2.936751063167,0.38335,0.47)); +#54413 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54414 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#54415 = ORIENTED_EDGE('',*,*,#54416,.T.); +#54416 = EDGE_CURVE('',#54408,#54417,#54419,.T.); +#54417 = VERTEX_POINT('',#54418); +#54418 = CARTESIAN_POINT('',(-2.712859643916,0.38335,0.646614643503)); +#54419 = LINE('',#54420,#54421); +#54420 = CARTESIAN_POINT('',(-2.739789512565,0.38335,0.435270364467)); +#54421 = VECTOR('',#54422,1.); +#54422 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#54423 = ORIENTED_EDGE('',*,*,#54424,.T.); +#54424 = EDGE_CURVE('',#54417,#54425,#54427,.T.); +#54425 = VERTEX_POINT('',#54426); +#54426 = CARTESIAN_POINT('',(-2.25,0.38335,1.035)); +#54427 = CIRCLE('',#54428,0.47); +#54428 = AXIS2_PLACEMENT_3D('',#54429,#54430,#54431); +#54429 = CARTESIAN_POINT('',(-2.25,0.38335,0.565)); +#54430 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#54431 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#54432 = ORIENTED_EDGE('',*,*,#54433,.T.); +#54433 = EDGE_CURVE('',#54425,#53821,#54434,.T.); +#54434 = LINE('',#54435,#54436); +#54435 = CARTESIAN_POINT('',(-2.25,0.38335,1.035)); +#54436 = VECTOR('',#54437,1.); +#54437 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54438 = PLANE('',#54439); +#54439 = AXIS2_PLACEMENT_3D('',#54440,#54441,#54442); +#54440 = CARTESIAN_POINT('',(-2.606989201797,0.38335,0.512419776725)); +#54441 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54442 = DIRECTION('',(0.,-0.,1.)); +#54443 = ADVANCED_FACE('',(#54444),#54530,.F.); +#54444 = FACE_BOUND('',#54445,.F.); +#54445 = EDGE_LOOP('',(#54446,#54447,#54448,#54457,#54465,#54474,#54482, + #54490,#54498,#54507,#54515,#54524)); +#54446 = ORIENTED_EDGE('',*,*,#53873,.T.); +#54447 = ORIENTED_EDGE('',*,*,#53842,.T.); +#54448 = ORIENTED_EDGE('',*,*,#54449,.T.); +#54449 = EDGE_CURVE('',#53843,#54450,#54452,.T.); +#54450 = VERTEX_POINT('',#54451); +#54451 = CARTESIAN_POINT('',(-2.446961550602,-0.38335,0.599729635533)); +#54452 = CIRCLE('',#54453,0.2); +#54453 = AXIS2_PLACEMENT_3D('',#54454,#54455,#54456); +#54454 = CARTESIAN_POINT('',(-2.25,-0.38335,0.565)); +#54455 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54456 = DIRECTION('',(0.,0.,1.)); +#54457 = ORIENTED_EDGE('',*,*,#54458,.T.); +#54458 = EDGE_CURVE('',#54450,#54459,#54461,.T.); +#54459 = VERTEX_POINT('',#54460); +#54460 = CARTESIAN_POINT('',(-2.473891419252,-0.38335,0.388385356497)); +#54461 = LINE('',#54462,#54463); +#54462 = CARTESIAN_POINT('',(-2.446961550602,-0.38335,0.599729635533)); +#54463 = VECTOR('',#54464,1.); +#54464 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#54465 = ORIENTED_EDGE('',*,*,#54466,.T.); +#54466 = EDGE_CURVE('',#54459,#54467,#54469,.T.); +#54467 = VERTEX_POINT('',#54468); +#54468 = CARTESIAN_POINT('',(-2.936751063167,-0.38335, + -1.665334536938E-16)); +#54469 = CIRCLE('',#54470,0.47); +#54470 = AXIS2_PLACEMENT_3D('',#54471,#54472,#54473); +#54471 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.47)); +#54472 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#54473 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#54474 = ORIENTED_EDGE('',*,*,#54475,.T.); +#54475 = EDGE_CURVE('',#54467,#54476,#54478,.T.); +#54476 = VERTEX_POINT('',#54477); +#54477 = CARTESIAN_POINT('',(-3.5,-0.38335,-1.665334536938E-16)); +#54478 = LINE('',#54479,#54480); +#54479 = CARTESIAN_POINT('',(-2.936751063167,-0.38335, + -1.665334536938E-16)); +#54480 = VECTOR('',#54481,1.); +#54481 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54482 = ORIENTED_EDGE('',*,*,#54483,.T.); +#54483 = EDGE_CURVE('',#54476,#54484,#54486,.T.); +#54484 = VERTEX_POINT('',#54485); +#54485 = CARTESIAN_POINT('',(-3.5,-0.38335,0.27)); +#54486 = LINE('',#54487,#54488); +#54487 = CARTESIAN_POINT('',(-3.5,-0.38335,-1.665334536938E-16)); +#54488 = VECTOR('',#54489,1.); +#54489 = DIRECTION('',(0.,0.,1.)); +#54490 = ORIENTED_EDGE('',*,*,#54491,.T.); +#54491 = EDGE_CURVE('',#54484,#54492,#54494,.T.); +#54492 = VERTEX_POINT('',#54493); +#54493 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.27)); +#54494 = LINE('',#54495,#54496); +#54495 = CARTESIAN_POINT('',(-3.5,-0.38335,0.27)); +#54496 = VECTOR('',#54497,1.); +#54497 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54498 = ORIENTED_EDGE('',*,*,#54499,.T.); +#54499 = EDGE_CURVE('',#54492,#54500,#54502,.T.); +#54500 = VERTEX_POINT('',#54501); +#54501 = CARTESIAN_POINT('',(-2.739789512565,-0.38335,0.435270364467)); +#54502 = CIRCLE('',#54503,0.2); +#54503 = AXIS2_PLACEMENT_3D('',#54504,#54505,#54506); +#54504 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.47)); +#54505 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54506 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#54507 = ORIENTED_EDGE('',*,*,#54508,.T.); +#54508 = EDGE_CURVE('',#54500,#54509,#54511,.T.); +#54509 = VERTEX_POINT('',#54510); +#54510 = CARTESIAN_POINT('',(-2.712859643916,-0.38335,0.646614643503)); +#54511 = LINE('',#54512,#54513); +#54512 = CARTESIAN_POINT('',(-2.739789512565,-0.38335,0.435270364467)); +#54513 = VECTOR('',#54514,1.); +#54514 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#54515 = ORIENTED_EDGE('',*,*,#54516,.T.); +#54516 = EDGE_CURVE('',#54509,#54517,#54519,.T.); +#54517 = VERTEX_POINT('',#54518); +#54518 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#54519 = CIRCLE('',#54520,0.47); +#54520 = AXIS2_PLACEMENT_3D('',#54521,#54522,#54523); +#54521 = CARTESIAN_POINT('',(-2.25,-0.38335,0.565)); +#54522 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#54523 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#54524 = ORIENTED_EDGE('',*,*,#54525,.T.); +#54525 = EDGE_CURVE('',#54517,#53874,#54526,.T.); +#54526 = LINE('',#54527,#54528); +#54527 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#54528 = VECTOR('',#54529,1.); +#54529 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54530 = PLANE('',#54531); +#54531 = AXIS2_PLACEMENT_3D('',#54532,#54533,#54534); +#54532 = CARTESIAN_POINT('',(-2.606989201797,-0.38335,0.512419776725)); +#54533 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54534 = DIRECTION('',(0.,-0.,1.)); +#54535 = ADVANCED_FACE('',(#54536),#54547,.F.); +#54536 = FACE_BOUND('',#54537,.F.); +#54537 = EDGE_LOOP('',(#54538,#54539,#54540,#54546)); +#54538 = ORIENTED_EDGE('',*,*,#53859,.T.); +#54539 = ORIENTED_EDGE('',*,*,#54357,.T.); +#54540 = ORIENTED_EDGE('',*,*,#54541,.F.); +#54541 = EDGE_CURVE('',#54450,#54358,#54542,.T.); +#54542 = LINE('',#54543,#54544); +#54543 = CARTESIAN_POINT('',(-2.446961550602,-0.38335,0.599729635533)); +#54544 = VECTOR('',#54545,1.); +#54545 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54546 = ORIENTED_EDGE('',*,*,#54449,.F.); +#54547 = CYLINDRICAL_SURFACE('',#54548,0.2); +#54548 = AXIS2_PLACEMENT_3D('',#54549,#54550,#54551); +#54549 = CARTESIAN_POINT('',(-2.25,-0.38335,0.565)); +#54550 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54551 = DIRECTION('',(0.,0.,1.)); +#54552 = ADVANCED_FACE('',(#54553),#54578,.T.); +#54553 = FACE_BOUND('',#54554,.T.); +#54554 = EDGE_LOOP('',(#54555,#54563,#54564,#54572)); +#54555 = ORIENTED_EDGE('',*,*,#54556,.F.); +#54556 = EDGE_CURVE('',#53874,#54557,#54559,.T.); +#54557 = VERTEX_POINT('',#54558); +#54558 = CARTESIAN_POINT('',(-1.735,-0.38335,1.035)); +#54559 = LINE('',#54560,#54561); +#54560 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#54561 = VECTOR('',#54562,1.); +#54562 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54563 = ORIENTED_EDGE('',*,*,#53890,.T.); +#54564 = ORIENTED_EDGE('',*,*,#54565,.T.); +#54565 = EDGE_CURVE('',#53883,#54566,#54568,.T.); +#54566 = VERTEX_POINT('',#54567); +#54567 = CARTESIAN_POINT('',(-1.735,-1.91675,1.035)); +#54568 = LINE('',#54569,#54570); +#54569 = CARTESIAN_POINT('',(-2.25,-1.91675,1.035)); +#54570 = VECTOR('',#54571,1.); +#54571 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54572 = ORIENTED_EDGE('',*,*,#54573,.F.); +#54573 = EDGE_CURVE('',#54557,#54566,#54574,.T.); +#54574 = LINE('',#54575,#54576); +#54575 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#54576 = VECTOR('',#54577,1.); +#54577 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54578 = PLANE('',#54579); +#54579 = AXIS2_PLACEMENT_3D('',#54580,#54581,#54582); +#54580 = CARTESIAN_POINT('',(-1.7425,-3.732941412364E-16,1.035)); +#54581 = DIRECTION('',(-2.496972947931E-25,-3.410490578954E-32,1.)); +#54582 = DIRECTION('',(1.025679957475E-16,-1.,-3.410490576393E-32)); +#54583 = ADVANCED_FACE('',(#54584),#54670,.T.); +#54584 = FACE_BOUND('',#54585,.T.); +#54585 = EDGE_LOOP('',(#54586,#54587,#54588,#54597,#54605,#54614,#54622, + #54630,#54638,#54647,#54655,#54664)); +#54586 = ORIENTED_EDGE('',*,*,#53882,.T.); +#54587 = ORIENTED_EDGE('',*,*,#53913,.T.); +#54588 = ORIENTED_EDGE('',*,*,#54589,.T.); +#54589 = EDGE_CURVE('',#53914,#54590,#54592,.T.); +#54590 = VERTEX_POINT('',#54591); +#54591 = CARTESIAN_POINT('',(-2.446961550602,-1.91675,0.599729635533)); +#54592 = CIRCLE('',#54593,0.2); +#54593 = AXIS2_PLACEMENT_3D('',#54594,#54595,#54596); +#54594 = CARTESIAN_POINT('',(-2.25,-1.91675,0.565)); +#54595 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54596 = DIRECTION('',(0.,0.,1.)); +#54597 = ORIENTED_EDGE('',*,*,#54598,.T.); +#54598 = EDGE_CURVE('',#54590,#54599,#54601,.T.); +#54599 = VERTEX_POINT('',#54600); +#54600 = CARTESIAN_POINT('',(-2.473891419252,-1.91675,0.388385356497)); +#54601 = LINE('',#54602,#54603); +#54602 = CARTESIAN_POINT('',(-2.446961550602,-1.91675,0.599729635533)); +#54603 = VECTOR('',#54604,1.); +#54604 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#54605 = ORIENTED_EDGE('',*,*,#54606,.T.); +#54606 = EDGE_CURVE('',#54599,#54607,#54609,.T.); +#54607 = VERTEX_POINT('',#54608); +#54608 = CARTESIAN_POINT('',(-2.936751063167,-1.91675, + -1.665334536938E-16)); +#54609 = CIRCLE('',#54610,0.47); +#54610 = AXIS2_PLACEMENT_3D('',#54611,#54612,#54613); +#54611 = CARTESIAN_POINT('',(-2.936751063167,-1.91675,0.47)); +#54612 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#54613 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#54614 = ORIENTED_EDGE('',*,*,#54615,.T.); +#54615 = EDGE_CURVE('',#54607,#54616,#54618,.T.); +#54616 = VERTEX_POINT('',#54617); +#54617 = CARTESIAN_POINT('',(-3.5,-1.91675,-1.665334536938E-16)); +#54618 = LINE('',#54619,#54620); +#54619 = CARTESIAN_POINT('',(-2.936751063167,-1.91675, + -1.665334536938E-16)); +#54620 = VECTOR('',#54621,1.); +#54621 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54622 = ORIENTED_EDGE('',*,*,#54623,.T.); +#54623 = EDGE_CURVE('',#54616,#54624,#54626,.T.); +#54624 = VERTEX_POINT('',#54625); +#54625 = CARTESIAN_POINT('',(-3.5,-1.91675,0.27)); +#54626 = LINE('',#54627,#54628); +#54627 = CARTESIAN_POINT('',(-3.5,-1.91675,-1.665334536938E-16)); +#54628 = VECTOR('',#54629,1.); +#54629 = DIRECTION('',(0.,0.,1.)); +#54630 = ORIENTED_EDGE('',*,*,#54631,.T.); +#54631 = EDGE_CURVE('',#54624,#54632,#54634,.T.); +#54632 = VERTEX_POINT('',#54633); +#54633 = CARTESIAN_POINT('',(-2.936751063167,-1.91675,0.27)); +#54634 = LINE('',#54635,#54636); +#54635 = CARTESIAN_POINT('',(-3.5,-1.91675,0.27)); +#54636 = VECTOR('',#54637,1.); +#54637 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54638 = ORIENTED_EDGE('',*,*,#54639,.T.); +#54639 = EDGE_CURVE('',#54632,#54640,#54642,.T.); +#54640 = VERTEX_POINT('',#54641); +#54641 = CARTESIAN_POINT('',(-2.739789512565,-1.91675,0.435270364467)); +#54642 = CIRCLE('',#54643,0.2); +#54643 = AXIS2_PLACEMENT_3D('',#54644,#54645,#54646); +#54644 = CARTESIAN_POINT('',(-2.936751063167,-1.91675,0.47)); +#54645 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54646 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#54647 = ORIENTED_EDGE('',*,*,#54648,.T.); +#54648 = EDGE_CURVE('',#54640,#54649,#54651,.T.); +#54649 = VERTEX_POINT('',#54650); +#54650 = CARTESIAN_POINT('',(-2.712859643916,-1.91675,0.646614643503)); +#54651 = LINE('',#54652,#54653); +#54652 = CARTESIAN_POINT('',(-2.739789512565,-1.91675,0.435270364467)); +#54653 = VECTOR('',#54654,1.); +#54654 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#54655 = ORIENTED_EDGE('',*,*,#54656,.T.); +#54656 = EDGE_CURVE('',#54649,#54657,#54659,.T.); +#54657 = VERTEX_POINT('',#54658); +#54658 = CARTESIAN_POINT('',(-2.25,-1.91675,1.035)); +#54659 = CIRCLE('',#54660,0.47); +#54660 = AXIS2_PLACEMENT_3D('',#54661,#54662,#54663); +#54661 = CARTESIAN_POINT('',(-2.25,-1.91675,0.565)); +#54662 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#54663 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#54664 = ORIENTED_EDGE('',*,*,#54665,.T.); +#54665 = EDGE_CURVE('',#54657,#53883,#54666,.T.); +#54666 = LINE('',#54667,#54668); +#54667 = CARTESIAN_POINT('',(-2.25,-1.91675,1.035)); +#54668 = VECTOR('',#54669,1.); +#54669 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54670 = PLANE('',#54671); +#54671 = AXIS2_PLACEMENT_3D('',#54672,#54673,#54674); +#54672 = CARTESIAN_POINT('',(-2.606989201797,-1.91675,0.512419776725)); +#54673 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54674 = DIRECTION('',(0.,-0.,1.)); +#54675 = ADVANCED_FACE('',(#54676),#54762,.F.); +#54676 = FACE_BOUND('',#54677,.F.); +#54677 = EDGE_LOOP('',(#54678,#54679,#54680,#54689,#54697,#54706,#54714, + #54722,#54730,#54739,#54747,#54756)); +#54678 = ORIENTED_EDGE('',*,*,#53935,.T.); +#54679 = ORIENTED_EDGE('',*,*,#53904,.T.); +#54680 = ORIENTED_EDGE('',*,*,#54681,.T.); +#54681 = EDGE_CURVE('',#53905,#54682,#54684,.T.); +#54682 = VERTEX_POINT('',#54683); +#54683 = CARTESIAN_POINT('',(-2.446961550602,-2.68345,0.599729635533)); +#54684 = CIRCLE('',#54685,0.2); +#54685 = AXIS2_PLACEMENT_3D('',#54686,#54687,#54688); +#54686 = CARTESIAN_POINT('',(-2.25,-2.68345,0.565)); +#54687 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54688 = DIRECTION('',(0.,0.,1.)); +#54689 = ORIENTED_EDGE('',*,*,#54690,.T.); +#54690 = EDGE_CURVE('',#54682,#54691,#54693,.T.); +#54691 = VERTEX_POINT('',#54692); +#54692 = CARTESIAN_POINT('',(-2.473891419252,-2.68345,0.388385356497)); +#54693 = LINE('',#54694,#54695); +#54694 = CARTESIAN_POINT('',(-2.446961550602,-2.68345,0.599729635533)); +#54695 = VECTOR('',#54696,1.); +#54696 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#54697 = ORIENTED_EDGE('',*,*,#54698,.T.); +#54698 = EDGE_CURVE('',#54691,#54699,#54701,.T.); +#54699 = VERTEX_POINT('',#54700); +#54700 = CARTESIAN_POINT('',(-2.936751063167,-2.68345, + -1.665334536938E-16)); +#54701 = CIRCLE('',#54702,0.47); +#54702 = AXIS2_PLACEMENT_3D('',#54703,#54704,#54705); +#54703 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.47)); +#54704 = DIRECTION('',(1.144237745222E-17,1.,-1.155557966632E-33)); +#54705 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#54706 = ORIENTED_EDGE('',*,*,#54707,.T.); +#54707 = EDGE_CURVE('',#54699,#54708,#54710,.T.); +#54708 = VERTEX_POINT('',#54709); +#54709 = CARTESIAN_POINT('',(-3.5,-2.68345,-1.665334536938E-16)); +#54710 = LINE('',#54711,#54712); +#54711 = CARTESIAN_POINT('',(-2.936751063167,-2.68345, + -1.665334536938E-16)); +#54712 = VECTOR('',#54713,1.); +#54713 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#54714 = ORIENTED_EDGE('',*,*,#54715,.T.); +#54715 = EDGE_CURVE('',#54708,#54716,#54718,.T.); +#54716 = VERTEX_POINT('',#54717); +#54717 = CARTESIAN_POINT('',(-3.5,-2.68345,0.27)); +#54718 = LINE('',#54719,#54720); +#54719 = CARTESIAN_POINT('',(-3.5,-2.68345,-1.665334536938E-16)); +#54720 = VECTOR('',#54721,1.); +#54721 = DIRECTION('',(0.,0.,1.)); +#54722 = ORIENTED_EDGE('',*,*,#54723,.T.); +#54723 = EDGE_CURVE('',#54716,#54724,#54726,.T.); +#54724 = VERTEX_POINT('',#54725); +#54725 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.27)); +#54726 = LINE('',#54727,#54728); +#54727 = CARTESIAN_POINT('',(-3.5,-2.68345,0.27)); +#54728 = VECTOR('',#54729,1.); +#54729 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54730 = ORIENTED_EDGE('',*,*,#54731,.T.); +#54731 = EDGE_CURVE('',#54724,#54732,#54734,.T.); +#54732 = VERTEX_POINT('',#54733); +#54733 = CARTESIAN_POINT('',(-2.739789512565,-2.68345,0.435270364467)); +#54734 = CIRCLE('',#54735,0.2); +#54735 = AXIS2_PLACEMENT_3D('',#54736,#54737,#54738); +#54736 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.47)); +#54737 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54738 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#54739 = ORIENTED_EDGE('',*,*,#54740,.T.); +#54740 = EDGE_CURVE('',#54732,#54741,#54743,.T.); +#54741 = VERTEX_POINT('',#54742); +#54742 = CARTESIAN_POINT('',(-2.712859643916,-2.68345,0.646614643503)); +#54743 = LINE('',#54744,#54745); +#54744 = CARTESIAN_POINT('',(-2.739789512565,-2.68345,0.435270364467)); +#54745 = VECTOR('',#54746,1.); +#54746 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#54747 = ORIENTED_EDGE('',*,*,#54748,.T.); +#54748 = EDGE_CURVE('',#54741,#54749,#54751,.T.); +#54749 = VERTEX_POINT('',#54750); +#54750 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#54751 = CIRCLE('',#54752,0.47); +#54752 = AXIS2_PLACEMENT_3D('',#54753,#54754,#54755); +#54753 = CARTESIAN_POINT('',(-2.25,-2.68345,0.565)); +#54754 = DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33)); +#54755 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#54756 = ORIENTED_EDGE('',*,*,#54757,.T.); +#54757 = EDGE_CURVE('',#54749,#53936,#54758,.T.); +#54758 = LINE('',#54759,#54760); +#54759 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#54760 = VECTOR('',#54761,1.); +#54761 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54762 = PLANE('',#54763); +#54763 = AXIS2_PLACEMENT_3D('',#54764,#54765,#54766); +#54764 = CARTESIAN_POINT('',(-2.606989201797,-2.68345,0.512419776725)); +#54765 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54766 = DIRECTION('',(0.,-0.,1.)); +#54767 = ADVANCED_FACE('',(#54768),#54779,.F.); +#54768 = FACE_BOUND('',#54769,.F.); +#54769 = EDGE_LOOP('',(#54770,#54771,#54772,#54778)); +#54770 = ORIENTED_EDGE('',*,*,#53921,.T.); +#54771 = ORIENTED_EDGE('',*,*,#54589,.T.); +#54772 = ORIENTED_EDGE('',*,*,#54773,.F.); +#54773 = EDGE_CURVE('',#54682,#54590,#54774,.T.); +#54774 = LINE('',#54775,#54776); +#54775 = CARTESIAN_POINT('',(-2.446961550602,-2.68345,0.599729635533)); +#54776 = VECTOR('',#54777,1.); +#54777 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#54778 = ORIENTED_EDGE('',*,*,#54681,.F.); +#54779 = CYLINDRICAL_SURFACE('',#54780,0.2); +#54780 = AXIS2_PLACEMENT_3D('',#54781,#54782,#54783); +#54781 = CARTESIAN_POINT('',(-2.25,-2.68345,0.565)); +#54782 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#54783 = DIRECTION('',(0.,0.,1.)); +#54784 = ADVANCED_FACE('',(#54785),#54835,.T.); +#54785 = FACE_BOUND('',#54786,.T.); +#54786 = EDGE_LOOP('',(#54787,#54795,#54803,#54811,#54819,#54827,#54833, + #54834)); +#54787 = ORIENTED_EDGE('',*,*,#54788,.T.); +#54788 = EDGE_CURVE('',#54023,#54789,#54791,.T.); +#54789 = VERTEX_POINT('',#54790); +#54790 = CARTESIAN_POINT('',(1.75,-1.15005,1.035)); +#54791 = LINE('',#54792,#54793); +#54792 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#54793 = VECTOR('',#54794,1.); +#54794 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54795 = ORIENTED_EDGE('',*,*,#54796,.T.); +#54796 = EDGE_CURVE('',#54789,#54797,#54799,.T.); +#54797 = VERTEX_POINT('',#54798); +#54798 = CARTESIAN_POINT('',(1.735,-1.15005,1.035)); +#54799 = LINE('',#54800,#54801); +#54800 = CARTESIAN_POINT('',(2.25,-1.15005,1.035)); +#54801 = VECTOR('',#54802,1.); +#54802 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54803 = ORIENTED_EDGE('',*,*,#54804,.F.); +#54804 = EDGE_CURVE('',#54805,#54797,#54807,.T.); +#54805 = VERTEX_POINT('',#54806); +#54806 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#54807 = LINE('',#54808,#54809); +#54808 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#54809 = VECTOR('',#54810,1.); +#54810 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54811 = ORIENTED_EDGE('',*,*,#54812,.F.); +#54812 = EDGE_CURVE('',#54813,#54805,#54815,.T.); +#54813 = VERTEX_POINT('',#54814); +#54814 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#54815 = LINE('',#54816,#54817); +#54816 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#54817 = VECTOR('',#54818,1.); +#54818 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54819 = ORIENTED_EDGE('',*,*,#54820,.F.); +#54820 = EDGE_CURVE('',#54821,#54813,#54823,.T.); +#54821 = VERTEX_POINT('',#54822); +#54822 = CARTESIAN_POINT('',(-1.735,-2.68345,1.035)); +#54823 = LINE('',#54824,#54825); +#54824 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#54825 = VECTOR('',#54826,1.); +#54826 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54827 = ORIENTED_EDGE('',*,*,#54828,.F.); +#54828 = EDGE_CURVE('',#53936,#54821,#54829,.T.); +#54829 = LINE('',#54830,#54831); +#54830 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#54831 = VECTOR('',#54832,1.); +#54832 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#54833 = ORIENTED_EDGE('',*,*,#53951,.T.); +#54834 = ORIENTED_EDGE('',*,*,#54029,.T.); +#54835 = PLANE('',#54836); +#54836 = AXIS2_PLACEMENT_3D('',#54837,#54838,#54839); +#54837 = CARTESIAN_POINT('',(-1.7425,-3.732941412364E-16,1.035)); +#54838 = DIRECTION('',(-2.496972947931E-25,-3.410490578954E-32,1.)); +#54839 = DIRECTION('',(1.025679957475E-16,-1.,-3.410490576393E-32)); +#54840 = ADVANCED_FACE('',(#54841),#54852,.T.); +#54841 = FACE_BOUND('',#54842,.T.); +#54842 = EDGE_LOOP('',(#54843,#54844,#54845,#54851)); +#54843 = ORIENTED_EDGE('',*,*,#54022,.F.); +#54844 = ORIENTED_EDGE('',*,*,#54006,.T.); +#54845 = ORIENTED_EDGE('',*,*,#54846,.F.); +#54846 = EDGE_CURVE('',#54789,#53999,#54847,.T.); +#54847 = LINE('',#54848,#54849); +#54848 = CARTESIAN_POINT('',(1.75,-1.15005,0.773709888363)); +#54849 = VECTOR('',#54850,1.); +#54850 = DIRECTION('',(0.,0.,-1.)); +#54851 = ORIENTED_EDGE('',*,*,#54788,.F.); +#54852 = PLANE('',#54853); +#54853 = AXIS2_PLACEMENT_3D('',#54854,#54855,#54856); +#54854 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#54855 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54856 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54857 = ADVANCED_FACE('',(#54858),#54883,.F.); +#54858 = FACE_BOUND('',#54859,.F.); +#54859 = EDGE_LOOP('',(#54860,#54861,#54869,#54877)); +#54860 = ORIENTED_EDGE('',*,*,#53998,.F.); +#54861 = ORIENTED_EDGE('',*,*,#54862,.T.); +#54862 = EDGE_CURVE('',#53999,#54863,#54865,.T.); +#54863 = VERTEX_POINT('',#54864); +#54864 = CARTESIAN_POINT('',(2.25,-1.15005,0.765)); +#54865 = LINE('',#54866,#54867); +#54866 = CARTESIAN_POINT('',(1.72,-1.15005,0.765)); +#54867 = VECTOR('',#54868,1.); +#54868 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54869 = ORIENTED_EDGE('',*,*,#54870,.F.); +#54870 = EDGE_CURVE('',#54871,#54863,#54873,.T.); +#54871 = VERTEX_POINT('',#54872); +#54872 = CARTESIAN_POINT('',(2.25,1.15005,0.765)); +#54873 = LINE('',#54874,#54875); +#54874 = CARTESIAN_POINT('',(2.25,1.15005,0.765)); +#54875 = VECTOR('',#54876,1.); +#54876 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#54877 = ORIENTED_EDGE('',*,*,#54878,.F.); +#54878 = EDGE_CURVE('',#53991,#54871,#54879,.T.); +#54879 = LINE('',#54880,#54881); +#54880 = CARTESIAN_POINT('',(1.72,1.15005,0.765)); +#54881 = VECTOR('',#54882,1.); +#54882 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54883 = PLANE('',#54884); +#54884 = AXIS2_PLACEMENT_3D('',#54885,#54886,#54887); +#54885 = CARTESIAN_POINT('',(1.72,-0.38335,0.765)); +#54886 = DIRECTION('',(0.,0.,1.)); +#54887 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#54888 = ADVANCED_FACE('',(#54889),#54900,.T.); +#54889 = FACE_BOUND('',#54890,.T.); +#54890 = EDGE_LOOP('',(#54891,#54897,#54898,#54899)); +#54891 = ORIENTED_EDGE('',*,*,#54892,.T.); +#54892 = EDGE_CURVE('',#54102,#53991,#54893,.T.); +#54893 = LINE('',#54894,#54895); +#54894 = CARTESIAN_POINT('',(1.75,1.15005,0.773709888363)); +#54895 = VECTOR('',#54896,1.); +#54896 = DIRECTION('',(0.,0.,-1.)); +#54897 = ORIENTED_EDGE('',*,*,#53990,.T.); +#54898 = ORIENTED_EDGE('',*,*,#54054,.T.); +#54899 = ORIENTED_EDGE('',*,*,#54109,.F.); +#54900 = PLANE('',#54901); +#54901 = AXIS2_PLACEMENT_3D('',#54902,#54903,#54904); +#54902 = CARTESIAN_POINT('',(1.75,-3.25,1.035)); +#54903 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#54904 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54905 = ADVANCED_FACE('',(#54906),#54938,.F.); +#54906 = FACE_BOUND('',#54907,.F.); +#54907 = EDGE_LOOP('',(#54908,#54918,#54924,#54925,#54931,#54932)); +#54908 = ORIENTED_EDGE('',*,*,#54909,.F.); +#54909 = EDGE_CURVE('',#54910,#54912,#54914,.T.); +#54910 = VERTEX_POINT('',#54911); +#54911 = CARTESIAN_POINT('',(2.25,-1.15005,1.035)); +#54912 = VERTEX_POINT('',#54913); +#54913 = CARTESIAN_POINT('',(2.25,1.15005,1.035)); +#54914 = LINE('',#54915,#54916); +#54915 = CARTESIAN_POINT('',(2.25,-1.15005,1.035)); +#54916 = VECTOR('',#54917,1.); +#54917 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54918 = ORIENTED_EDGE('',*,*,#54919,.T.); +#54919 = EDGE_CURVE('',#54910,#54789,#54920,.T.); +#54920 = LINE('',#54921,#54922); +#54921 = CARTESIAN_POINT('',(2.25,-1.15005,1.035)); +#54922 = VECTOR('',#54923,1.); +#54923 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54924 = ORIENTED_EDGE('',*,*,#54796,.T.); +#54925 = ORIENTED_EDGE('',*,*,#54926,.T.); +#54926 = EDGE_CURVE('',#54797,#54094,#54927,.T.); +#54927 = LINE('',#54928,#54929); +#54928 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#54929 = VECTOR('',#54930,1.); +#54930 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54931 = ORIENTED_EDGE('',*,*,#54101,.F.); +#54932 = ORIENTED_EDGE('',*,*,#54933,.F.); +#54933 = EDGE_CURVE('',#54912,#54102,#54934,.T.); +#54934 = LINE('',#54935,#54936); +#54935 = CARTESIAN_POINT('',(2.25,1.15005,1.035)); +#54936 = VECTOR('',#54937,1.); +#54937 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54938 = PLANE('',#54939); +#54939 = AXIS2_PLACEMENT_3D('',#54940,#54941,#54942); +#54940 = CARTESIAN_POINT('',(2.25,-0.38335,1.035)); +#54941 = DIRECTION('',(0.,0.,-1.)); +#54942 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#54943 = ADVANCED_FACE('',(#54944),#54969,.T.); +#54944 = FACE_BOUND('',#54945,.T.); +#54945 = EDGE_LOOP('',(#54946,#54947,#54948,#54949,#54956,#54964)); +#54946 = ORIENTED_EDGE('',*,*,#54804,.T.); +#54947 = ORIENTED_EDGE('',*,*,#54926,.T.); +#54948 = ORIENTED_EDGE('',*,*,#54093,.T.); +#54949 = ORIENTED_EDGE('',*,*,#54950,.T.); +#54950 = EDGE_CURVE('',#54086,#54951,#54953,.T.); +#54951 = VERTEX_POINT('',#54952); +#54952 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#54953 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54954,#54955),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54954 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#54955 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#54956 = ORIENTED_EDGE('',*,*,#54957,.F.); +#54957 = EDGE_CURVE('',#54958,#54951,#54960,.T.); +#54958 = VERTEX_POINT('',#54959); +#54959 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#54960 = LINE('',#54961,#54962); +#54961 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#54962 = VECTOR('',#54963,1.); +#54963 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#54964 = ORIENTED_EDGE('',*,*,#54965,.F.); +#54965 = EDGE_CURVE('',#54805,#54958,#54966,.T.); +#54966 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54967,#54968),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54967 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#54968 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#54969 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54970,#54971) + ,(#54972,#54973 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.47),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#54970 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#54971 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#54972 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#54973 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#54974 = ADVANCED_FACE('',(#54975),#54992,.T.); +#54975 = FACE_BOUND('',#54976,.T.); +#54976 = EDGE_LOOP('',(#54977,#54978,#54985,#54991)); +#54977 = ORIENTED_EDGE('',*,*,#54085,.T.); +#54978 = ORIENTED_EDGE('',*,*,#54979,.T.); +#54979 = EDGE_CURVE('',#54078,#54980,#54982,.T.); +#54980 = VERTEX_POINT('',#54981); +#54981 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#54982 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#54983,#54984),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#54983 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#54984 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#54985 = ORIENTED_EDGE('',*,*,#54986,.F.); +#54986 = EDGE_CURVE('',#54951,#54980,#54987,.T.); +#54987 = LINE('',#54988,#54989); +#54988 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#54989 = VECTOR('',#54990,1.); +#54990 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#54991 = ORIENTED_EDGE('',*,*,#54950,.F.); +#54992 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#54993,#54994) + ,(#54995,#54996 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.47),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#54993 = CARTESIAN_POINT('',(1.735,3.235,1.035)); +#54994 = CARTESIAN_POINT('',(1.641540344923,3.141540344923,1.7)); +#54995 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#54996 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#54997 = ADVANCED_FACE('',(#54998),#55036,.T.); +#54998 = FACE_BOUND('',#54999,.T.); +#54999 = EDGE_LOOP('',(#55000,#55001,#55007,#55008,#55014,#55015,#55021, + #55022,#55029,#55035)); +#55000 = ORIENTED_EDGE('',*,*,#54077,.T.); +#55001 = ORIENTED_EDGE('',*,*,#55002,.T.); +#55002 = EDGE_CURVE('',#54070,#54325,#55003,.T.); +#55003 = LINE('',#55004,#55005); +#55004 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#55005 = VECTOR('',#55006,1.); +#55006 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55007 = ORIENTED_EDGE('',*,*,#54341,.T.); +#55008 = ORIENTED_EDGE('',*,*,#55009,.T.); +#55009 = EDGE_CURVE('',#54334,#54557,#55010,.T.); +#55010 = LINE('',#55011,#55012); +#55011 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#55012 = VECTOR('',#55013,1.); +#55013 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55014 = ORIENTED_EDGE('',*,*,#54573,.T.); +#55015 = ORIENTED_EDGE('',*,*,#55016,.T.); +#55016 = EDGE_CURVE('',#54566,#54821,#55017,.T.); +#55017 = LINE('',#55018,#55019); +#55018 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#55019 = VECTOR('',#55020,1.); +#55020 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55021 = ORIENTED_EDGE('',*,*,#54820,.T.); +#55022 = ORIENTED_EDGE('',*,*,#55023,.T.); +#55023 = EDGE_CURVE('',#54813,#55024,#55026,.T.); +#55024 = VERTEX_POINT('',#55025); +#55025 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#55026 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55027,#55028),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55027 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#55028 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#55029 = ORIENTED_EDGE('',*,*,#55030,.F.); +#55030 = EDGE_CURVE('',#54980,#55024,#55031,.T.); +#55031 = LINE('',#55032,#55033); +#55032 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#55033 = VECTOR('',#55034,1.); +#55034 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55035 = ORIENTED_EDGE('',*,*,#54979,.F.); +#55036 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55037,#55038) + ,(#55039,#55040 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.47),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#55037 = CARTESIAN_POINT('',(-1.735,3.235,1.035)); +#55038 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#55039 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#55040 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#55041 = ADVANCED_FACE('',(#55042),#55055,.F.); +#55042 = FACE_BOUND('',#55043,.F.); +#55043 = EDGE_LOOP('',(#55044,#55045,#55051,#55052,#55053,#55054)); +#55044 = ORIENTED_EDGE('',*,*,#54293,.F.); +#55045 = ORIENTED_EDGE('',*,*,#55046,.T.); +#55046 = EDGE_CURVE('',#54285,#54193,#55047,.T.); +#55047 = LINE('',#55048,#55049); +#55048 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#55049 = VECTOR('',#55050,1.); +#55050 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55051 = ORIENTED_EDGE('',*,*,#54201,.T.); +#55052 = ORIENTED_EDGE('',*,*,#54069,.T.); +#55053 = ORIENTED_EDGE('',*,*,#55002,.T.); +#55054 = ORIENTED_EDGE('',*,*,#54324,.F.); +#55055 = PLANE('',#55056); +#55056 = AXIS2_PLACEMENT_3D('',#55057,#55058,#55059); +#55057 = CARTESIAN_POINT('',(-2.25,1.91675,1.035)); +#55058 = DIRECTION('',(0.,0.,-1.)); +#55059 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55060 = ADVANCED_FACE('',(#55061),#55072,.T.); +#55061 = FACE_BOUND('',#55062,.T.); +#55062 = EDGE_LOOP('',(#55063,#55064,#55065,#55066)); +#55063 = ORIENTED_EDGE('',*,*,#54284,.T.); +#55064 = ORIENTED_EDGE('',*,*,#55046,.T.); +#55065 = ORIENTED_EDGE('',*,*,#54192,.F.); +#55066 = ORIENTED_EDGE('',*,*,#55067,.F.); +#55067 = EDGE_CURVE('',#54277,#54185,#55068,.T.); +#55068 = LINE('',#55069,#55070); +#55069 = CARTESIAN_POINT('',(-2.712859643916,1.91675,0.646614643503)); +#55070 = VECTOR('',#55071,1.); +#55071 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55072 = CYLINDRICAL_SURFACE('',#55073,0.47); +#55073 = AXIS2_PLACEMENT_3D('',#55074,#55075,#55076); +#55074 = CARTESIAN_POINT('',(-2.25,1.91675,0.565)); +#55075 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55076 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55077 = ADVANCED_FACE('',(#55078),#55089,.F.); +#55078 = FACE_BOUND('',#55079,.F.); +#55079 = EDGE_LOOP('',(#55080,#55086,#55087,#55088)); +#55080 = ORIENTED_EDGE('',*,*,#55081,.T.); +#55081 = EDGE_CURVE('',#54268,#54176,#55082,.T.); +#55082 = LINE('',#55083,#55084); +#55083 = CARTESIAN_POINT('',(-2.739789512565,1.91675,0.435270364467)); +#55084 = VECTOR('',#55085,1.); +#55085 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55086 = ORIENTED_EDGE('',*,*,#54184,.T.); +#55087 = ORIENTED_EDGE('',*,*,#55067,.F.); +#55088 = ORIENTED_EDGE('',*,*,#54276,.F.); +#55089 = PLANE('',#55090); +#55090 = AXIS2_PLACEMENT_3D('',#55091,#55092,#55093); +#55091 = CARTESIAN_POINT('',(-2.739789512565,1.91675,0.435270364467)); +#55092 = DIRECTION('',(0.991979380222,-1.135060249332E-17, + -0.126399799104)); +#55093 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#55094 = ADVANCED_FACE('',(#55095),#55106,.F.); +#55095 = FACE_BOUND('',#55096,.F.); +#55096 = EDGE_LOOP('',(#55097,#55103,#55104,#55105)); +#55097 = ORIENTED_EDGE('',*,*,#55098,.T.); +#55098 = EDGE_CURVE('',#54260,#54168,#55099,.T.); +#55099 = LINE('',#55100,#55101); +#55100 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.27)); +#55101 = VECTOR('',#55102,1.); +#55102 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55103 = ORIENTED_EDGE('',*,*,#54175,.T.); +#55104 = ORIENTED_EDGE('',*,*,#55081,.F.); +#55105 = ORIENTED_EDGE('',*,*,#54267,.F.); +#55106 = CYLINDRICAL_SURFACE('',#55107,0.2); +#55107 = AXIS2_PLACEMENT_3D('',#55108,#55109,#55110); +#55108 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.47)); +#55109 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55110 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55111 = ADVANCED_FACE('',(#55112),#55123,.F.); +#55112 = FACE_BOUND('',#55113,.F.); +#55113 = EDGE_LOOP('',(#55114,#55120,#55121,#55122)); +#55114 = ORIENTED_EDGE('',*,*,#55115,.T.); +#55115 = EDGE_CURVE('',#54252,#54160,#55116,.T.); +#55116 = LINE('',#55117,#55118); +#55117 = CARTESIAN_POINT('',(-3.5,1.91675,0.27)); +#55118 = VECTOR('',#55119,1.); +#55119 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55120 = ORIENTED_EDGE('',*,*,#54167,.T.); +#55121 = ORIENTED_EDGE('',*,*,#55098,.F.); +#55122 = ORIENTED_EDGE('',*,*,#54259,.F.); +#55123 = PLANE('',#55124); +#55124 = AXIS2_PLACEMENT_3D('',#55125,#55126,#55127); +#55125 = CARTESIAN_POINT('',(-3.5,1.91675,0.27)); +#55126 = DIRECTION('',(0.,0.,-1.)); +#55127 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55128 = ADVANCED_FACE('',(#55129),#55140,.F.); +#55129 = FACE_BOUND('',#55130,.F.); +#55130 = EDGE_LOOP('',(#55131,#55137,#55138,#55139)); +#55131 = ORIENTED_EDGE('',*,*,#55132,.T.); +#55132 = EDGE_CURVE('',#54244,#54152,#55133,.T.); +#55133 = LINE('',#55134,#55135); +#55134 = CARTESIAN_POINT('',(-3.5,1.91675,-1.665334536938E-16)); +#55135 = VECTOR('',#55136,1.); +#55136 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55137 = ORIENTED_EDGE('',*,*,#54159,.T.); +#55138 = ORIENTED_EDGE('',*,*,#55115,.F.); +#55139 = ORIENTED_EDGE('',*,*,#54251,.F.); +#55140 = PLANE('',#55141); +#55141 = AXIS2_PLACEMENT_3D('',#55142,#55143,#55144); +#55142 = CARTESIAN_POINT('',(-3.5,1.91675,-1.665334536938E-16)); +#55143 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55144 = DIRECTION('',(0.,0.,1.)); +#55145 = ADVANCED_FACE('',(#55146),#55157,.F.); +#55146 = FACE_BOUND('',#55147,.F.); +#55147 = EDGE_LOOP('',(#55148,#55154,#55155,#55156)); +#55148 = ORIENTED_EDGE('',*,*,#55149,.T.); +#55149 = EDGE_CURVE('',#54235,#54143,#55150,.T.); +#55150 = LINE('',#55151,#55152); +#55151 = CARTESIAN_POINT('',(-2.936751063167,1.91675,-1.665334536938E-16 + )); +#55152 = VECTOR('',#55153,1.); +#55153 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55154 = ORIENTED_EDGE('',*,*,#54151,.T.); +#55155 = ORIENTED_EDGE('',*,*,#55132,.F.); +#55156 = ORIENTED_EDGE('',*,*,#54243,.F.); +#55157 = PLANE('',#55158); +#55158 = AXIS2_PLACEMENT_3D('',#55159,#55160,#55161); +#55159 = CARTESIAN_POINT('',(-2.936751063167,1.91675,-1.665334536938E-16 + )); +#55160 = DIRECTION('',(0.,0.,1.)); +#55161 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55162 = ADVANCED_FACE('',(#55163),#55174,.T.); +#55163 = FACE_BOUND('',#55164,.T.); +#55164 = EDGE_LOOP('',(#55165,#55166,#55167,#55168)); +#55165 = ORIENTED_EDGE('',*,*,#54234,.T.); +#55166 = ORIENTED_EDGE('',*,*,#55149,.T.); +#55167 = ORIENTED_EDGE('',*,*,#54142,.F.); +#55168 = ORIENTED_EDGE('',*,*,#55169,.F.); +#55169 = EDGE_CURVE('',#54227,#54135,#55170,.T.); +#55170 = LINE('',#55171,#55172); +#55171 = CARTESIAN_POINT('',(-2.473891419252,1.91675,0.388385356497)); +#55172 = VECTOR('',#55173,1.); +#55173 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55174 = CYLINDRICAL_SURFACE('',#55175,0.47); +#55175 = AXIS2_PLACEMENT_3D('',#55176,#55177,#55178); +#55176 = CARTESIAN_POINT('',(-2.936751063167,1.91675,0.47)); +#55177 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55178 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55179 = ADVANCED_FACE('',(#55180),#55186,.F.); +#55180 = FACE_BOUND('',#55181,.F.); +#55181 = EDGE_LOOP('',(#55182,#55183,#55184,#55185)); +#55182 = ORIENTED_EDGE('',*,*,#54309,.T.); +#55183 = ORIENTED_EDGE('',*,*,#54134,.T.); +#55184 = ORIENTED_EDGE('',*,*,#55169,.F.); +#55185 = ORIENTED_EDGE('',*,*,#54226,.F.); +#55186 = PLANE('',#55187); +#55187 = AXIS2_PLACEMENT_3D('',#55188,#55189,#55190); +#55188 = CARTESIAN_POINT('',(-2.446961550602,1.91675,0.599729635533)); +#55189 = DIRECTION('',(-0.991979380222,1.135060249332E-17,0.126399799104 + )); +#55190 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#55191 = ADVANCED_FACE('',(#55192),#55205,.F.); +#55192 = FACE_BOUND('',#55193,.F.); +#55193 = EDGE_LOOP('',(#55194,#55195,#55201,#55202,#55203,#55204)); +#55194 = ORIENTED_EDGE('',*,*,#54525,.F.); +#55195 = ORIENTED_EDGE('',*,*,#55196,.T.); +#55196 = EDGE_CURVE('',#54517,#54425,#55197,.T.); +#55197 = LINE('',#55198,#55199); +#55198 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#55199 = VECTOR('',#55200,1.); +#55200 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55201 = ORIENTED_EDGE('',*,*,#54433,.T.); +#55202 = ORIENTED_EDGE('',*,*,#54333,.T.); +#55203 = ORIENTED_EDGE('',*,*,#55009,.T.); +#55204 = ORIENTED_EDGE('',*,*,#54556,.F.); +#55205 = PLANE('',#55206); +#55206 = AXIS2_PLACEMENT_3D('',#55207,#55208,#55209); +#55207 = CARTESIAN_POINT('',(-2.25,-0.38335,1.035)); +#55208 = DIRECTION('',(0.,0.,-1.)); +#55209 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55210 = ADVANCED_FACE('',(#55211),#55222,.T.); +#55211 = FACE_BOUND('',#55212,.T.); +#55212 = EDGE_LOOP('',(#55213,#55214,#55215,#55216)); +#55213 = ORIENTED_EDGE('',*,*,#54516,.T.); +#55214 = ORIENTED_EDGE('',*,*,#55196,.T.); +#55215 = ORIENTED_EDGE('',*,*,#54424,.F.); +#55216 = ORIENTED_EDGE('',*,*,#55217,.F.); +#55217 = EDGE_CURVE('',#54509,#54417,#55218,.T.); +#55218 = LINE('',#55219,#55220); +#55219 = CARTESIAN_POINT('',(-2.712859643916,-0.38335,0.646614643503)); +#55220 = VECTOR('',#55221,1.); +#55221 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55222 = CYLINDRICAL_SURFACE('',#55223,0.47); +#55223 = AXIS2_PLACEMENT_3D('',#55224,#55225,#55226); +#55224 = CARTESIAN_POINT('',(-2.25,-0.38335,0.565)); +#55225 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55226 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55227 = ADVANCED_FACE('',(#55228),#55239,.F.); +#55228 = FACE_BOUND('',#55229,.F.); +#55229 = EDGE_LOOP('',(#55230,#55236,#55237,#55238)); +#55230 = ORIENTED_EDGE('',*,*,#55231,.T.); +#55231 = EDGE_CURVE('',#54500,#54408,#55232,.T.); +#55232 = LINE('',#55233,#55234); +#55233 = CARTESIAN_POINT('',(-2.739789512565,-0.38335,0.435270364467)); +#55234 = VECTOR('',#55235,1.); +#55235 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55236 = ORIENTED_EDGE('',*,*,#54416,.T.); +#55237 = ORIENTED_EDGE('',*,*,#55217,.F.); +#55238 = ORIENTED_EDGE('',*,*,#54508,.F.); +#55239 = PLANE('',#55240); +#55240 = AXIS2_PLACEMENT_3D('',#55241,#55242,#55243); +#55241 = CARTESIAN_POINT('',(-2.739789512565,-0.38335,0.435270364467)); +#55242 = DIRECTION('',(0.991979380222,-1.135060249332E-17, + -0.126399799104)); +#55243 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#55244 = ADVANCED_FACE('',(#55245),#55256,.F.); +#55245 = FACE_BOUND('',#55246,.F.); +#55246 = EDGE_LOOP('',(#55247,#55253,#55254,#55255)); +#55247 = ORIENTED_EDGE('',*,*,#55248,.T.); +#55248 = EDGE_CURVE('',#54492,#54400,#55249,.T.); +#55249 = LINE('',#55250,#55251); +#55250 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.27)); +#55251 = VECTOR('',#55252,1.); +#55252 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55253 = ORIENTED_EDGE('',*,*,#54407,.T.); +#55254 = ORIENTED_EDGE('',*,*,#55231,.F.); +#55255 = ORIENTED_EDGE('',*,*,#54499,.F.); +#55256 = CYLINDRICAL_SURFACE('',#55257,0.2); +#55257 = AXIS2_PLACEMENT_3D('',#55258,#55259,#55260); +#55258 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.47)); +#55259 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55260 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55261 = ADVANCED_FACE('',(#55262),#55273,.F.); +#55262 = FACE_BOUND('',#55263,.F.); +#55263 = EDGE_LOOP('',(#55264,#55270,#55271,#55272)); +#55264 = ORIENTED_EDGE('',*,*,#55265,.T.); +#55265 = EDGE_CURVE('',#54484,#54392,#55266,.T.); +#55266 = LINE('',#55267,#55268); +#55267 = CARTESIAN_POINT('',(-3.5,-0.38335,0.27)); +#55268 = VECTOR('',#55269,1.); +#55269 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55270 = ORIENTED_EDGE('',*,*,#54399,.T.); +#55271 = ORIENTED_EDGE('',*,*,#55248,.F.); +#55272 = ORIENTED_EDGE('',*,*,#54491,.F.); +#55273 = PLANE('',#55274); +#55274 = AXIS2_PLACEMENT_3D('',#55275,#55276,#55277); +#55275 = CARTESIAN_POINT('',(-3.5,-0.38335,0.27)); +#55276 = DIRECTION('',(0.,0.,-1.)); +#55277 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55278 = ADVANCED_FACE('',(#55279),#55290,.F.); +#55279 = FACE_BOUND('',#55280,.F.); +#55280 = EDGE_LOOP('',(#55281,#55287,#55288,#55289)); +#55281 = ORIENTED_EDGE('',*,*,#55282,.T.); +#55282 = EDGE_CURVE('',#54476,#54384,#55283,.T.); +#55283 = LINE('',#55284,#55285); +#55284 = CARTESIAN_POINT('',(-3.5,-0.38335,-1.665334536938E-16)); +#55285 = VECTOR('',#55286,1.); +#55286 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55287 = ORIENTED_EDGE('',*,*,#54391,.T.); +#55288 = ORIENTED_EDGE('',*,*,#55265,.F.); +#55289 = ORIENTED_EDGE('',*,*,#54483,.F.); +#55290 = PLANE('',#55291); +#55291 = AXIS2_PLACEMENT_3D('',#55292,#55293,#55294); +#55292 = CARTESIAN_POINT('',(-3.5,-0.38335,-1.665334536938E-16)); +#55293 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55294 = DIRECTION('',(0.,0.,1.)); +#55295 = ADVANCED_FACE('',(#55296),#55307,.F.); +#55296 = FACE_BOUND('',#55297,.F.); +#55297 = EDGE_LOOP('',(#55298,#55304,#55305,#55306)); +#55298 = ORIENTED_EDGE('',*,*,#55299,.T.); +#55299 = EDGE_CURVE('',#54467,#54375,#55300,.T.); +#55300 = LINE('',#55301,#55302); +#55301 = CARTESIAN_POINT('',(-2.936751063167,-0.38335, + -1.665334536938E-16)); +#55302 = VECTOR('',#55303,1.); +#55303 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55304 = ORIENTED_EDGE('',*,*,#54383,.T.); +#55305 = ORIENTED_EDGE('',*,*,#55282,.F.); +#55306 = ORIENTED_EDGE('',*,*,#54475,.F.); +#55307 = PLANE('',#55308); +#55308 = AXIS2_PLACEMENT_3D('',#55309,#55310,#55311); +#55309 = CARTESIAN_POINT('',(-2.936751063167,-0.38335, + -1.665334536938E-16)); +#55310 = DIRECTION('',(0.,0.,1.)); +#55311 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55312 = ADVANCED_FACE('',(#55313),#55324,.T.); +#55313 = FACE_BOUND('',#55314,.T.); +#55314 = EDGE_LOOP('',(#55315,#55316,#55317,#55318)); +#55315 = ORIENTED_EDGE('',*,*,#54466,.T.); +#55316 = ORIENTED_EDGE('',*,*,#55299,.T.); +#55317 = ORIENTED_EDGE('',*,*,#54374,.F.); +#55318 = ORIENTED_EDGE('',*,*,#55319,.F.); +#55319 = EDGE_CURVE('',#54459,#54367,#55320,.T.); +#55320 = LINE('',#55321,#55322); +#55321 = CARTESIAN_POINT('',(-2.473891419252,-0.38335,0.388385356497)); +#55322 = VECTOR('',#55323,1.); +#55323 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55324 = CYLINDRICAL_SURFACE('',#55325,0.47); +#55325 = AXIS2_PLACEMENT_3D('',#55326,#55327,#55328); +#55326 = CARTESIAN_POINT('',(-2.936751063167,-0.38335,0.47)); +#55327 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55328 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55329 = ADVANCED_FACE('',(#55330),#55336,.F.); +#55330 = FACE_BOUND('',#55331,.F.); +#55331 = EDGE_LOOP('',(#55332,#55333,#55334,#55335)); +#55332 = ORIENTED_EDGE('',*,*,#54541,.T.); +#55333 = ORIENTED_EDGE('',*,*,#54366,.T.); +#55334 = ORIENTED_EDGE('',*,*,#55319,.F.); +#55335 = ORIENTED_EDGE('',*,*,#54458,.F.); +#55336 = PLANE('',#55337); +#55337 = AXIS2_PLACEMENT_3D('',#55338,#55339,#55340); +#55338 = CARTESIAN_POINT('',(-2.446961550602,-0.38335,0.599729635533)); +#55339 = DIRECTION('',(-0.991979380222,1.135060249332E-17,0.126399799104 + )); +#55340 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#55341 = ADVANCED_FACE('',(#55342),#55355,.F.); +#55342 = FACE_BOUND('',#55343,.F.); +#55343 = EDGE_LOOP('',(#55344,#55345,#55351,#55352,#55353,#55354)); +#55344 = ORIENTED_EDGE('',*,*,#54757,.F.); +#55345 = ORIENTED_EDGE('',*,*,#55346,.T.); +#55346 = EDGE_CURVE('',#54749,#54657,#55347,.T.); +#55347 = LINE('',#55348,#55349); +#55348 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#55349 = VECTOR('',#55350,1.); +#55350 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55351 = ORIENTED_EDGE('',*,*,#54665,.T.); +#55352 = ORIENTED_EDGE('',*,*,#54565,.T.); +#55353 = ORIENTED_EDGE('',*,*,#55016,.T.); +#55354 = ORIENTED_EDGE('',*,*,#54828,.F.); +#55355 = PLANE('',#55356); +#55356 = AXIS2_PLACEMENT_3D('',#55357,#55358,#55359); +#55357 = CARTESIAN_POINT('',(-2.25,-2.68345,1.035)); +#55358 = DIRECTION('',(0.,0.,-1.)); +#55359 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55360 = ADVANCED_FACE('',(#55361),#55372,.T.); +#55361 = FACE_BOUND('',#55362,.T.); +#55362 = EDGE_LOOP('',(#55363,#55364,#55365,#55366)); +#55363 = ORIENTED_EDGE('',*,*,#54748,.T.); +#55364 = ORIENTED_EDGE('',*,*,#55346,.T.); +#55365 = ORIENTED_EDGE('',*,*,#54656,.F.); +#55366 = ORIENTED_EDGE('',*,*,#55367,.F.); +#55367 = EDGE_CURVE('',#54741,#54649,#55368,.T.); +#55368 = LINE('',#55369,#55370); +#55369 = CARTESIAN_POINT('',(-2.712859643916,-2.68345,0.646614643503)); +#55370 = VECTOR('',#55371,1.); +#55371 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55372 = CYLINDRICAL_SURFACE('',#55373,0.47); +#55373 = AXIS2_PLACEMENT_3D('',#55374,#55375,#55376); +#55374 = CARTESIAN_POINT('',(-2.25,-2.68345,0.565)); +#55375 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55376 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#55377 = ADVANCED_FACE('',(#55378),#55389,.F.); +#55378 = FACE_BOUND('',#55379,.F.); +#55379 = EDGE_LOOP('',(#55380,#55386,#55387,#55388)); +#55380 = ORIENTED_EDGE('',*,*,#55381,.T.); +#55381 = EDGE_CURVE('',#54732,#54640,#55382,.T.); +#55382 = LINE('',#55383,#55384); +#55383 = CARTESIAN_POINT('',(-2.739789512565,-2.68345,0.435270364467)); +#55384 = VECTOR('',#55385,1.); +#55385 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55386 = ORIENTED_EDGE('',*,*,#54648,.T.); +#55387 = ORIENTED_EDGE('',*,*,#55367,.F.); +#55388 = ORIENTED_EDGE('',*,*,#54740,.F.); +#55389 = PLANE('',#55390); +#55390 = AXIS2_PLACEMENT_3D('',#55391,#55392,#55393); +#55391 = CARTESIAN_POINT('',(-2.739789512565,-2.68345,0.435270364467)); +#55392 = DIRECTION('',(0.991979380222,-1.135060249332E-17, + -0.126399799104)); +#55393 = DIRECTION('',(0.126399799104,-1.446314211233E-18,0.991979380222 + )); +#55394 = ADVANCED_FACE('',(#55395),#55406,.F.); +#55395 = FACE_BOUND('',#55396,.F.); +#55396 = EDGE_LOOP('',(#55397,#55403,#55404,#55405)); +#55397 = ORIENTED_EDGE('',*,*,#55398,.T.); +#55398 = EDGE_CURVE('',#54724,#54632,#55399,.T.); +#55399 = LINE('',#55400,#55401); +#55400 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.27)); +#55401 = VECTOR('',#55402,1.); +#55402 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55403 = ORIENTED_EDGE('',*,*,#54639,.T.); +#55404 = ORIENTED_EDGE('',*,*,#55381,.F.); +#55405 = ORIENTED_EDGE('',*,*,#54731,.F.); +#55406 = CYLINDRICAL_SURFACE('',#55407,0.2); +#55407 = AXIS2_PLACEMENT_3D('',#55408,#55409,#55410); +#55408 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.47)); +#55409 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55410 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#55411 = ADVANCED_FACE('',(#55412),#55423,.F.); +#55412 = FACE_BOUND('',#55413,.F.); +#55413 = EDGE_LOOP('',(#55414,#55420,#55421,#55422)); +#55414 = ORIENTED_EDGE('',*,*,#55415,.T.); +#55415 = EDGE_CURVE('',#54716,#54624,#55416,.T.); +#55416 = LINE('',#55417,#55418); +#55417 = CARTESIAN_POINT('',(-3.5,-2.68345,0.27)); +#55418 = VECTOR('',#55419,1.); +#55419 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55420 = ORIENTED_EDGE('',*,*,#54631,.T.); +#55421 = ORIENTED_EDGE('',*,*,#55398,.F.); +#55422 = ORIENTED_EDGE('',*,*,#54723,.F.); +#55423 = PLANE('',#55424); +#55424 = AXIS2_PLACEMENT_3D('',#55425,#55426,#55427); +#55425 = CARTESIAN_POINT('',(-3.5,-2.68345,0.27)); +#55426 = DIRECTION('',(0.,0.,-1.)); +#55427 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55428 = ADVANCED_FACE('',(#55429),#55440,.F.); +#55429 = FACE_BOUND('',#55430,.F.); +#55430 = EDGE_LOOP('',(#55431,#55437,#55438,#55439)); +#55431 = ORIENTED_EDGE('',*,*,#55432,.T.); +#55432 = EDGE_CURVE('',#54708,#54616,#55433,.T.); +#55433 = LINE('',#55434,#55435); +#55434 = CARTESIAN_POINT('',(-3.5,-2.68345,-1.665334536938E-16)); +#55435 = VECTOR('',#55436,1.); +#55436 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55437 = ORIENTED_EDGE('',*,*,#54623,.T.); +#55438 = ORIENTED_EDGE('',*,*,#55415,.F.); +#55439 = ORIENTED_EDGE('',*,*,#54715,.F.); +#55440 = PLANE('',#55441); +#55441 = AXIS2_PLACEMENT_3D('',#55442,#55443,#55444); +#55442 = CARTESIAN_POINT('',(-3.5,-2.68345,-1.665334536938E-16)); +#55443 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#55444 = DIRECTION('',(0.,0.,1.)); +#55445 = ADVANCED_FACE('',(#55446),#55457,.F.); +#55446 = FACE_BOUND('',#55447,.F.); +#55447 = EDGE_LOOP('',(#55448,#55454,#55455,#55456)); +#55448 = ORIENTED_EDGE('',*,*,#55449,.T.); +#55449 = EDGE_CURVE('',#54699,#54607,#55450,.T.); +#55450 = LINE('',#55451,#55452); +#55451 = CARTESIAN_POINT('',(-2.936751063167,-2.68345, + -1.665334536938E-16)); +#55452 = VECTOR('',#55453,1.); +#55453 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55454 = ORIENTED_EDGE('',*,*,#54615,.T.); +#55455 = ORIENTED_EDGE('',*,*,#55432,.F.); +#55456 = ORIENTED_EDGE('',*,*,#54707,.F.); +#55457 = PLANE('',#55458); +#55458 = AXIS2_PLACEMENT_3D('',#55459,#55460,#55461); +#55459 = CARTESIAN_POINT('',(-2.936751063167,-2.68345, + -1.665334536938E-16)); +#55460 = DIRECTION('',(0.,0.,1.)); +#55461 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#55462 = ADVANCED_FACE('',(#55463),#55474,.T.); +#55463 = FACE_BOUND('',#55464,.T.); +#55464 = EDGE_LOOP('',(#55465,#55466,#55467,#55468)); +#55465 = ORIENTED_EDGE('',*,*,#54698,.T.); +#55466 = ORIENTED_EDGE('',*,*,#55449,.T.); +#55467 = ORIENTED_EDGE('',*,*,#54606,.F.); +#55468 = ORIENTED_EDGE('',*,*,#55469,.F.); +#55469 = EDGE_CURVE('',#54691,#54599,#55470,.T.); +#55470 = LINE('',#55471,#55472); +#55471 = CARTESIAN_POINT('',(-2.473891419252,-2.68345,0.388385356497)); +#55472 = VECTOR('',#55473,1.); +#55473 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#55474 = CYLINDRICAL_SURFACE('',#55475,0.47); +#55475 = AXIS2_PLACEMENT_3D('',#55476,#55477,#55478); +#55476 = CARTESIAN_POINT('',(-2.936751063167,-2.68345,0.47)); +#55477 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#55478 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#55479 = ADVANCED_FACE('',(#55480),#55486,.F.); +#55480 = FACE_BOUND('',#55481,.F.); +#55481 = EDGE_LOOP('',(#55482,#55483,#55484,#55485)); +#55482 = ORIENTED_EDGE('',*,*,#54773,.T.); +#55483 = ORIENTED_EDGE('',*,*,#54598,.T.); +#55484 = ORIENTED_EDGE('',*,*,#55469,.F.); +#55485 = ORIENTED_EDGE('',*,*,#54690,.F.); +#55486 = PLANE('',#55487); +#55487 = AXIS2_PLACEMENT_3D('',#55488,#55489,#55490); +#55488 = CARTESIAN_POINT('',(-2.446961550602,-2.68345,0.599729635533)); +#55489 = DIRECTION('',(-0.991979380222,1.135060249332E-17,0.126399799104 + )); +#55490 = DIRECTION('',(-0.126399799104,1.446314211233E-18, + -0.991979380222)); +#55491 = ADVANCED_FACE('',(#55492),#55503,.T.); +#55492 = FACE_BOUND('',#55493,.T.); +#55493 = EDGE_LOOP('',(#55494,#55495,#55496,#55502)); +#55494 = ORIENTED_EDGE('',*,*,#54812,.T.); +#55495 = ORIENTED_EDGE('',*,*,#54965,.T.); +#55496 = ORIENTED_EDGE('',*,*,#55497,.F.); +#55497 = EDGE_CURVE('',#55024,#54958,#55498,.T.); +#55498 = LINE('',#55499,#55500); +#55499 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#55500 = VECTOR('',#55501,1.); +#55501 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#55502 = ORIENTED_EDGE('',*,*,#55023,.F.); +#55503 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55504,#55505) + ,(#55506,#55507 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.47),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#55504 = CARTESIAN_POINT('',(-1.735,-3.235,1.035)); +#55505 = CARTESIAN_POINT('',(-1.641540344923,-3.141540344923,1.7)); +#55506 = CARTESIAN_POINT('',(1.735,-3.235,1.035)); +#55507 = CARTESIAN_POINT('',(1.641540344923,-3.141540344923,1.7)); +#55508 = ADVANCED_FACE('',(#55509),#55588,.T.); +#55509 = FACE_BOUND('',#55510,.T.); +#55510 = EDGE_LOOP('',(#55511,#55512,#55513,#55522,#55530,#55539,#55547, + #55555,#55563,#55572,#55580,#55587)); +#55511 = ORIENTED_EDGE('',*,*,#54846,.T.); +#55512 = ORIENTED_EDGE('',*,*,#54862,.T.); +#55513 = ORIENTED_EDGE('',*,*,#55514,.T.); +#55514 = EDGE_CURVE('',#54863,#55515,#55517,.T.); +#55515 = VERTEX_POINT('',#55516); +#55516 = CARTESIAN_POINT('',(2.446961550602,-1.15005,0.599729635533)); +#55517 = CIRCLE('',#55518,0.2); +#55518 = AXIS2_PLACEMENT_3D('',#55519,#55520,#55521); +#55519 = CARTESIAN_POINT('',(2.25,-1.15005,0.565)); +#55520 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55521 = DIRECTION('',(0.,0.,1.)); +#55522 = ORIENTED_EDGE('',*,*,#55523,.T.); +#55523 = EDGE_CURVE('',#55515,#55524,#55526,.T.); +#55524 = VERTEX_POINT('',#55525); +#55525 = CARTESIAN_POINT('',(2.473891419252,-1.15005,0.388385356497)); +#55526 = LINE('',#55527,#55528); +#55527 = CARTESIAN_POINT('',(2.446961550602,-1.15005,0.599729635533)); +#55528 = VECTOR('',#55529,1.); +#55529 = DIRECTION('',(0.126399799104,1.403319672733E-17,-0.991979380222 + )); +#55530 = ORIENTED_EDGE('',*,*,#55531,.T.); +#55531 = EDGE_CURVE('',#55524,#55532,#55534,.T.); +#55532 = VERTEX_POINT('',#55533); +#55533 = CARTESIAN_POINT('',(2.936751063167,-1.15005,-1.665334536938E-16 + )); +#55534 = CIRCLE('',#55535,0.47); +#55535 = AXIS2_PLACEMENT_3D('',#55536,#55537,#55538); +#55536 = CARTESIAN_POINT('',(2.936751063167,-1.15005,0.47)); +#55537 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55538 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#55539 = ORIENTED_EDGE('',*,*,#55540,.T.); +#55540 = EDGE_CURVE('',#55532,#55541,#55543,.T.); +#55541 = VERTEX_POINT('',#55542); +#55542 = CARTESIAN_POINT('',(3.5,-1.15005,-1.665334536938E-16)); +#55543 = LINE('',#55544,#55545); +#55544 = CARTESIAN_POINT('',(2.936751063167,-1.15005,-1.665334536938E-16 + )); +#55545 = VECTOR('',#55546,1.); +#55546 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#55547 = ORIENTED_EDGE('',*,*,#55548,.T.); +#55548 = EDGE_CURVE('',#55541,#55549,#55551,.T.); +#55549 = VERTEX_POINT('',#55550); +#55550 = CARTESIAN_POINT('',(3.5,-1.15005,0.27)); +#55551 = LINE('',#55552,#55553); +#55552 = CARTESIAN_POINT('',(3.5,-1.15005,-1.665334536938E-16)); +#55553 = VECTOR('',#55554,1.); +#55554 = DIRECTION('',(0.,0.,1.)); +#55555 = ORIENTED_EDGE('',*,*,#55556,.T.); +#55556 = EDGE_CURVE('',#55549,#55557,#55559,.T.); +#55557 = VERTEX_POINT('',#55558); +#55558 = CARTESIAN_POINT('',(2.936751063167,-1.15005,0.27)); +#55559 = LINE('',#55560,#55561); +#55560 = CARTESIAN_POINT('',(3.5,-1.15005,0.27)); +#55561 = VECTOR('',#55562,1.); +#55562 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55563 = ORIENTED_EDGE('',*,*,#55564,.T.); +#55564 = EDGE_CURVE('',#55557,#55565,#55567,.T.); +#55565 = VERTEX_POINT('',#55566); +#55566 = CARTESIAN_POINT('',(2.739789512565,-1.15005,0.435270364467)); +#55567 = CIRCLE('',#55568,0.2); +#55568 = AXIS2_PLACEMENT_3D('',#55569,#55570,#55571); +#55569 = CARTESIAN_POINT('',(2.936751063167,-1.15005,0.47)); +#55570 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55571 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#55572 = ORIENTED_EDGE('',*,*,#55573,.T.); +#55573 = EDGE_CURVE('',#55565,#55574,#55576,.T.); +#55574 = VERTEX_POINT('',#55575); +#55575 = CARTESIAN_POINT('',(2.712859643916,-1.15005,0.646614643503)); +#55576 = LINE('',#55577,#55578); +#55577 = CARTESIAN_POINT('',(2.739789512565,-1.15005,0.435270364467)); +#55578 = VECTOR('',#55579,1.); +#55579 = DIRECTION('',(-0.126399799104,-1.403319672733E-17, + 0.991979380222)); +#55580 = ORIENTED_EDGE('',*,*,#55581,.T.); +#55581 = EDGE_CURVE('',#55574,#54910,#55582,.T.); +#55582 = CIRCLE('',#55583,0.47); +#55583 = AXIS2_PLACEMENT_3D('',#55584,#55585,#55586); +#55584 = CARTESIAN_POINT('',(2.25,-1.15005,0.565)); +#55585 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55586 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#55587 = ORIENTED_EDGE('',*,*,#54919,.T.); +#55588 = PLANE('',#55589); +#55589 = AXIS2_PLACEMENT_3D('',#55590,#55591,#55592); +#55590 = CARTESIAN_POINT('',(2.606989201797,-1.15005,0.512419776725)); +#55591 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55592 = DIRECTION('',(0.,0.,1.)); +#55593 = ADVANCED_FACE('',(#55594),#55673,.F.); +#55594 = FACE_BOUND('',#55595,.F.); +#55595 = EDGE_LOOP('',(#55596,#55597,#55598,#55607,#55615,#55624,#55632, + #55640,#55648,#55657,#55665,#55672)); +#55596 = ORIENTED_EDGE('',*,*,#54892,.T.); +#55597 = ORIENTED_EDGE('',*,*,#54878,.T.); +#55598 = ORIENTED_EDGE('',*,*,#55599,.T.); +#55599 = EDGE_CURVE('',#54871,#55600,#55602,.T.); +#55600 = VERTEX_POINT('',#55601); +#55601 = CARTESIAN_POINT('',(2.446961550602,1.15005,0.599729635533)); +#55602 = CIRCLE('',#55603,0.2); +#55603 = AXIS2_PLACEMENT_3D('',#55604,#55605,#55606); +#55604 = CARTESIAN_POINT('',(2.25,1.15005,0.565)); +#55605 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55606 = DIRECTION('',(0.,0.,1.)); +#55607 = ORIENTED_EDGE('',*,*,#55608,.T.); +#55608 = EDGE_CURVE('',#55600,#55609,#55611,.T.); +#55609 = VERTEX_POINT('',#55610); +#55610 = CARTESIAN_POINT('',(2.473891419252,1.15005,0.388385356497)); +#55611 = LINE('',#55612,#55613); +#55612 = CARTESIAN_POINT('',(2.446961550602,1.15005,0.599729635533)); +#55613 = VECTOR('',#55614,1.); +#55614 = DIRECTION('',(0.126399799104,1.403319672733E-17,-0.991979380222 + )); +#55615 = ORIENTED_EDGE('',*,*,#55616,.T.); +#55616 = EDGE_CURVE('',#55609,#55617,#55619,.T.); +#55617 = VERTEX_POINT('',#55618); +#55618 = CARTESIAN_POINT('',(2.936751063167,1.15005,-1.665334536938E-16) + ); +#55619 = CIRCLE('',#55620,0.47); +#55620 = AXIS2_PLACEMENT_3D('',#55621,#55622,#55623); +#55621 = CARTESIAN_POINT('',(2.936751063167,1.15005,0.47)); +#55622 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55623 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#55624 = ORIENTED_EDGE('',*,*,#55625,.T.); +#55625 = EDGE_CURVE('',#55617,#55626,#55628,.T.); +#55626 = VERTEX_POINT('',#55627); +#55627 = CARTESIAN_POINT('',(3.5,1.15005,-1.665334536938E-16)); +#55628 = LINE('',#55629,#55630); +#55629 = CARTESIAN_POINT('',(2.936751063167,1.15005,-1.665334536938E-16) + ); +#55630 = VECTOR('',#55631,1.); +#55631 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#55632 = ORIENTED_EDGE('',*,*,#55633,.T.); +#55633 = EDGE_CURVE('',#55626,#55634,#55636,.T.); +#55634 = VERTEX_POINT('',#55635); +#55635 = CARTESIAN_POINT('',(3.5,1.15005,0.27)); +#55636 = LINE('',#55637,#55638); +#55637 = CARTESIAN_POINT('',(3.5,1.15005,-1.665334536938E-16)); +#55638 = VECTOR('',#55639,1.); +#55639 = DIRECTION('',(0.,0.,1.)); +#55640 = ORIENTED_EDGE('',*,*,#55641,.T.); +#55641 = EDGE_CURVE('',#55634,#55642,#55644,.T.); +#55642 = VERTEX_POINT('',#55643); +#55643 = CARTESIAN_POINT('',(2.936751063167,1.15005,0.27)); +#55644 = LINE('',#55645,#55646); +#55645 = CARTESIAN_POINT('',(3.5,1.15005,0.27)); +#55646 = VECTOR('',#55647,1.); +#55647 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55648 = ORIENTED_EDGE('',*,*,#55649,.T.); +#55649 = EDGE_CURVE('',#55642,#55650,#55652,.T.); +#55650 = VERTEX_POINT('',#55651); +#55651 = CARTESIAN_POINT('',(2.739789512565,1.15005,0.435270364467)); +#55652 = CIRCLE('',#55653,0.2); +#55653 = AXIS2_PLACEMENT_3D('',#55654,#55655,#55656); +#55654 = CARTESIAN_POINT('',(2.936751063167,1.15005,0.47)); +#55655 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55656 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#55657 = ORIENTED_EDGE('',*,*,#55658,.T.); +#55658 = EDGE_CURVE('',#55650,#55659,#55661,.T.); +#55659 = VERTEX_POINT('',#55660); +#55660 = CARTESIAN_POINT('',(2.712859643916,1.15005,0.646614643503)); +#55661 = LINE('',#55662,#55663); +#55662 = CARTESIAN_POINT('',(2.739789512565,1.15005,0.435270364467)); +#55663 = VECTOR('',#55664,1.); +#55664 = DIRECTION('',(-0.126399799104,-1.403319672733E-17, + 0.991979380222)); +#55665 = ORIENTED_EDGE('',*,*,#55666,.T.); +#55666 = EDGE_CURVE('',#55659,#54912,#55667,.T.); +#55667 = CIRCLE('',#55668,0.47); +#55668 = AXIS2_PLACEMENT_3D('',#55669,#55670,#55671); +#55669 = CARTESIAN_POINT('',(2.25,1.15005,0.565)); +#55670 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55671 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#55672 = ORIENTED_EDGE('',*,*,#54933,.T.); +#55673 = PLANE('',#55674); +#55674 = AXIS2_PLACEMENT_3D('',#55675,#55676,#55677); +#55675 = CARTESIAN_POINT('',(2.606989201797,1.15005,0.512419776725)); +#55676 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55677 = DIRECTION('',(0.,0.,1.)); +#55678 = ADVANCED_FACE('',(#55679),#55690,.F.); +#55679 = FACE_BOUND('',#55680,.F.); +#55680 = EDGE_LOOP('',(#55681,#55682,#55688,#55689)); +#55681 = ORIENTED_EDGE('',*,*,#55514,.T.); +#55682 = ORIENTED_EDGE('',*,*,#55683,.F.); +#55683 = EDGE_CURVE('',#55600,#55515,#55684,.T.); +#55684 = LINE('',#55685,#55686); +#55685 = CARTESIAN_POINT('',(2.446961550602,1.15005,0.599729635533)); +#55686 = VECTOR('',#55687,1.); +#55687 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55688 = ORIENTED_EDGE('',*,*,#55599,.F.); +#55689 = ORIENTED_EDGE('',*,*,#54870,.T.); +#55690 = CYLINDRICAL_SURFACE('',#55691,0.2); +#55691 = AXIS2_PLACEMENT_3D('',#55692,#55693,#55694); +#55692 = CARTESIAN_POINT('',(2.25,-0.38335,0.565)); +#55693 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55694 = DIRECTION('',(0.,0.,1.)); +#55695 = ADVANCED_FACE('',(#55696),#55707,.T.); +#55696 = FACE_BOUND('',#55697,.T.); +#55697 = EDGE_LOOP('',(#55698,#55704,#55705,#55706)); +#55698 = ORIENTED_EDGE('',*,*,#55699,.F.); +#55699 = EDGE_CURVE('',#55659,#55574,#55700,.T.); +#55700 = LINE('',#55701,#55702); +#55701 = CARTESIAN_POINT('',(2.712859643916,1.15005,0.646614643503)); +#55702 = VECTOR('',#55703,1.); +#55703 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55704 = ORIENTED_EDGE('',*,*,#55666,.T.); +#55705 = ORIENTED_EDGE('',*,*,#54909,.F.); +#55706 = ORIENTED_EDGE('',*,*,#55581,.F.); +#55707 = CYLINDRICAL_SURFACE('',#55708,0.47); +#55708 = AXIS2_PLACEMENT_3D('',#55709,#55710,#55711); +#55709 = CARTESIAN_POINT('',(2.25,-0.38335,0.565)); +#55710 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55711 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#55712 = ADVANCED_FACE('',(#55713,#55719),#55730,.F.); +#55713 = FACE_BOUND('',#55714,.F.); +#55714 = EDGE_LOOP('',(#55715,#55716,#55717,#55718)); +#55715 = ORIENTED_EDGE('',*,*,#55030,.F.); +#55716 = ORIENTED_EDGE('',*,*,#54986,.F.); +#55717 = ORIENTED_EDGE('',*,*,#54957,.F.); +#55718 = ORIENTED_EDGE('',*,*,#55497,.F.); +#55719 = FACE_BOUND('',#55720,.F.); +#55720 = EDGE_LOOP('',(#55721)); +#55721 = ORIENTED_EDGE('',*,*,#55722,.F.); +#55722 = EDGE_CURVE('',#55723,#55723,#55725,.T.); +#55723 = VERTEX_POINT('',#55724); +#55724 = CARTESIAN_POINT('',(-1.441540344923,2.891540344923,1.7)); +#55725 = CIRCLE('',#55726,5.E-02); +#55726 = AXIS2_PLACEMENT_3D('',#55727,#55728,#55729); +#55727 = CARTESIAN_POINT('',(-1.441540344923,2.941540344923,1.7)); +#55728 = DIRECTION('',(0.,-0.,-1.)); +#55729 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55730 = PLANE('',#55731); +#55731 = AXIS2_PLACEMENT_3D('',#55732,#55733,#55734); +#55732 = CARTESIAN_POINT('',(-1.641540344923,3.141540344923,1.7)); +#55733 = DIRECTION('',(0.,0.,-1.)); +#55734 = DIRECTION('',(0.463114948424,-0.886298225512,0.)); +#55735 = ADVANCED_FACE('',(#55736),#55747,.F.); +#55736 = FACE_BOUND('',#55737,.F.); +#55737 = EDGE_LOOP('',(#55738,#55739,#55740,#55741)); +#55738 = ORIENTED_EDGE('',*,*,#55573,.T.); +#55739 = ORIENTED_EDGE('',*,*,#55699,.F.); +#55740 = ORIENTED_EDGE('',*,*,#55658,.F.); +#55741 = ORIENTED_EDGE('',*,*,#55742,.T.); +#55742 = EDGE_CURVE('',#55650,#55565,#55743,.T.); +#55743 = LINE('',#55744,#55745); +#55744 = CARTESIAN_POINT('',(2.739789512565,1.15005,0.435270364467)); +#55745 = VECTOR('',#55746,1.); +#55746 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55747 = PLANE('',#55748); +#55748 = AXIS2_PLACEMENT_3D('',#55749,#55750,#55751); +#55749 = CARTESIAN_POINT('',(2.739789512565,-0.38335,0.435270364467)); +#55750 = DIRECTION('',(-0.991979380222,-1.101318347876E-16, + -0.126399799104)); +#55751 = DIRECTION('',(-0.126399799104,-1.403319672733E-17, + 0.991979380222)); +#55752 = ADVANCED_FACE('',(#55753),#55764,.F.); +#55753 = FACE_BOUND('',#55754,.F.); +#55754 = EDGE_LOOP('',(#55755,#55756,#55757,#55758)); +#55755 = ORIENTED_EDGE('',*,*,#55564,.T.); +#55756 = ORIENTED_EDGE('',*,*,#55742,.F.); +#55757 = ORIENTED_EDGE('',*,*,#55649,.F.); +#55758 = ORIENTED_EDGE('',*,*,#55759,.T.); +#55759 = EDGE_CURVE('',#55642,#55557,#55760,.T.); +#55760 = LINE('',#55761,#55762); +#55761 = CARTESIAN_POINT('',(2.936751063167,1.15005,0.27)); +#55762 = VECTOR('',#55763,1.); +#55763 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55764 = CYLINDRICAL_SURFACE('',#55765,0.2); +#55765 = AXIS2_PLACEMENT_3D('',#55766,#55767,#55768); +#55766 = CARTESIAN_POINT('',(2.936751063167,-0.38335,0.47)); +#55767 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55768 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#55769 = ADVANCED_FACE('',(#55770),#55781,.F.); +#55770 = FACE_BOUND('',#55771,.F.); +#55771 = EDGE_LOOP('',(#55772,#55773,#55774,#55775)); +#55772 = ORIENTED_EDGE('',*,*,#55556,.T.); +#55773 = ORIENTED_EDGE('',*,*,#55759,.F.); +#55774 = ORIENTED_EDGE('',*,*,#55641,.F.); +#55775 = ORIENTED_EDGE('',*,*,#55776,.T.); +#55776 = EDGE_CURVE('',#55634,#55549,#55777,.T.); +#55777 = LINE('',#55778,#55779); +#55778 = CARTESIAN_POINT('',(3.5,1.15005,0.27)); +#55779 = VECTOR('',#55780,1.); +#55780 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55781 = PLANE('',#55782); +#55782 = AXIS2_PLACEMENT_3D('',#55783,#55784,#55785); +#55783 = CARTESIAN_POINT('',(3.5,-0.38335,0.27)); +#55784 = DIRECTION('',(0.,0.,-1.)); +#55785 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#55786 = ADVANCED_FACE('',(#55787),#55798,.F.); +#55787 = FACE_BOUND('',#55788,.F.); +#55788 = EDGE_LOOP('',(#55789,#55790,#55791,#55792)); +#55789 = ORIENTED_EDGE('',*,*,#55548,.T.); +#55790 = ORIENTED_EDGE('',*,*,#55776,.F.); +#55791 = ORIENTED_EDGE('',*,*,#55633,.F.); +#55792 = ORIENTED_EDGE('',*,*,#55793,.T.); +#55793 = EDGE_CURVE('',#55626,#55541,#55794,.T.); +#55794 = LINE('',#55795,#55796); +#55795 = CARTESIAN_POINT('',(3.5,1.15005,-1.665334536938E-16)); +#55796 = VECTOR('',#55797,1.); +#55797 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55798 = PLANE('',#55799); +#55799 = AXIS2_PLACEMENT_3D('',#55800,#55801,#55802); +#55800 = CARTESIAN_POINT('',(3.5,-0.38335,-1.665334536938E-16)); +#55801 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55802 = DIRECTION('',(0.,0.,1.)); +#55803 = ADVANCED_FACE('',(#55804),#55815,.F.); +#55804 = FACE_BOUND('',#55805,.F.); +#55805 = EDGE_LOOP('',(#55806,#55807,#55808,#55809)); +#55806 = ORIENTED_EDGE('',*,*,#55540,.T.); +#55807 = ORIENTED_EDGE('',*,*,#55793,.F.); +#55808 = ORIENTED_EDGE('',*,*,#55625,.F.); +#55809 = ORIENTED_EDGE('',*,*,#55810,.T.); +#55810 = EDGE_CURVE('',#55617,#55532,#55811,.T.); +#55811 = LINE('',#55812,#55813); +#55812 = CARTESIAN_POINT('',(2.936751063167,1.15005,-1.665334536938E-16) + ); +#55813 = VECTOR('',#55814,1.); +#55814 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55815 = PLANE('',#55816); +#55816 = AXIS2_PLACEMENT_3D('',#55817,#55818,#55819); +#55817 = CARTESIAN_POINT('',(2.936751063167,-0.38335,-1.665334536938E-16 + )); +#55818 = DIRECTION('',(0.,0.,1.)); +#55819 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#55820 = ADVANCED_FACE('',(#55821),#55832,.T.); +#55821 = FACE_BOUND('',#55822,.T.); +#55822 = EDGE_LOOP('',(#55823,#55829,#55830,#55831)); +#55823 = ORIENTED_EDGE('',*,*,#55824,.F.); +#55824 = EDGE_CURVE('',#55609,#55524,#55825,.T.); +#55825 = LINE('',#55826,#55827); +#55826 = CARTESIAN_POINT('',(2.473891419252,1.15005,0.388385356497)); +#55827 = VECTOR('',#55828,1.); +#55828 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55829 = ORIENTED_EDGE('',*,*,#55616,.T.); +#55830 = ORIENTED_EDGE('',*,*,#55810,.T.); +#55831 = ORIENTED_EDGE('',*,*,#55531,.F.); +#55832 = CYLINDRICAL_SURFACE('',#55833,0.47); +#55833 = AXIS2_PLACEMENT_3D('',#55834,#55835,#55836); +#55834 = CARTESIAN_POINT('',(2.936751063167,-0.38335,0.47)); +#55835 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55836 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#55837 = ADVANCED_FACE('',(#55838),#55844,.F.); +#55838 = FACE_BOUND('',#55839,.F.); +#55839 = EDGE_LOOP('',(#55840,#55841,#55842,#55843)); +#55840 = ORIENTED_EDGE('',*,*,#55523,.T.); +#55841 = ORIENTED_EDGE('',*,*,#55824,.F.); +#55842 = ORIENTED_EDGE('',*,*,#55608,.F.); +#55843 = ORIENTED_EDGE('',*,*,#55683,.T.); +#55844 = PLANE('',#55845); +#55845 = AXIS2_PLACEMENT_3D('',#55846,#55847,#55848); +#55846 = CARTESIAN_POINT('',(2.446961550602,-0.38335,0.599729635533)); +#55847 = DIRECTION('',(0.991979380222,1.101318347876E-16,0.126399799104) + ); +#55848 = DIRECTION('',(0.126399799104,1.403319672733E-17,-0.991979380222 + )); +#55849 = ADVANCED_FACE('',(#55850),#55851,.F.); +#55850 = FACE_BOUND('',#55720,.T.); +#55851 = PLANE('',#55852); +#55852 = AXIS2_PLACEMENT_3D('',#55853,#55854,#55855); +#55853 = CARTESIAN_POINT('',(-1.441540344923,2.941540344923,1.7)); +#55854 = DIRECTION('',(0.,0.,-1.)); +#55855 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#55860)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#55857,#55858,#55859)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#55857 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#55858 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#55859 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#55860 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#55857, + 'distance_accuracy_value','confusion accuracy'); +#55861 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#55862,#55864); +#55862 = ( REPRESENTATION_RELATIONSHIP('','',#53603,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#55863) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#55863 = ITEM_DEFINED_TRANSFORMATION('','',#11,#215); +#55864 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #55865); +#55865 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('51','U3','',#5,#53598,$); +#55866 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#53600)); +#55867 = SHAPE_DEFINITION_REPRESENTATION(#55868,#55874); +#55868 = PRODUCT_DEFINITION_SHAPE('','',#55869); +#55869 = PRODUCT_DEFINITION('design','',#55870,#55873); +#55870 = PRODUCT_DEFINITION_FORMATION('','',#55871); +#55871 = PRODUCT('SOT-23-5','SOT-23-5','',(#55872)); +#55872 = PRODUCT_CONTEXT('',#2,'mechanical'); +#55873 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#55874 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#55875),#58944); +#55875 = MANIFOLD_SOLID_BREP('',#55876); +#55876 = CLOSED_SHELL('',(#55877,#55915,#55978,#56001,#56030,#56053, + #56124,#56179,#56202,#56225,#56242,#56265,#56353,#56369,#56399, + #56430,#56461,#56492,#56523,#56554,#56571,#56588,#56619,#56650, + #56681,#56711,#56734,#56757,#56774,#56819,#56889,#56912,#56935, + #56958,#57013,#57051,#57100,#57192,#57217,#57301,#57323,#57415, + #57440,#57524,#57541,#57626,#57651,#57728,#57813,#57838,#57915, + #57932,#58024,#58049,#58133,#58150,#58169,#58188,#58234,#58250, + #58269,#58285,#58302,#58314,#58331,#58348,#58365,#58382,#58399, + #58416,#58433,#58445,#58462,#58479,#58496,#58513,#58530,#58547, + #58564,#58576,#58593,#58610,#58627,#58644,#58661,#58678,#58690, + #58707,#58724,#58741,#58758,#58775,#58792,#58804,#58821,#58838, + #58855,#58872,#58889,#58906,#58923,#58935)); +#55877 = ADVANCED_FACE('',(#55878),#55910,.F.); +#55878 = FACE_BOUND('',#55879,.F.); +#55879 = EDGE_LOOP('',(#55880,#55890,#55897,#55905)); +#55880 = ORIENTED_EDGE('',*,*,#55881,.T.); +#55881 = EDGE_CURVE('',#55882,#55884,#55886,.T.); +#55882 = VERTEX_POINT('',#55883); +#55883 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#55884 = VERTEX_POINT('',#55885); +#55885 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#55886 = LINE('',#55887,#55888); +#55887 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#55888 = VECTOR('',#55889,1.); +#55889 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#55890 = ORIENTED_EDGE('',*,*,#55891,.T.); +#55891 = EDGE_CURVE('',#55884,#55892,#55894,.T.); +#55892 = VERTEX_POINT('',#55893); +#55893 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#55894 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55895,#55896),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55895 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#55896 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#55897 = ORIENTED_EDGE('',*,*,#55898,.F.); +#55898 = EDGE_CURVE('',#55899,#55892,#55901,.T.); +#55899 = VERTEX_POINT('',#55900); +#55900 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#55901 = LINE('',#55902,#55903); +#55902 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#55903 = VECTOR('',#55904,1.); +#55904 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#55905 = ORIENTED_EDGE('',*,*,#55906,.F.); +#55906 = EDGE_CURVE('',#55882,#55899,#55907,.T.); +#55907 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55908,#55909),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55908 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#55909 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#55910 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55911,#55912) + ,(#55913,#55914 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#55911 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#55912 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#55913 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#55914 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#55915 = ADVANCED_FACE('',(#55916),#55973,.F.); +#55916 = FACE_BOUND('',#55917,.T.); +#55917 = EDGE_LOOP('',(#55918,#55919,#55927,#55935,#55943,#55951,#55959, + #55967)); +#55918 = ORIENTED_EDGE('',*,*,#55881,.T.); +#55919 = ORIENTED_EDGE('',*,*,#55920,.T.); +#55920 = EDGE_CURVE('',#55884,#55921,#55923,.T.); +#55921 = VERTEX_POINT('',#55922); +#55922 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#55923 = LINE('',#55924,#55925); +#55924 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#55925 = VECTOR('',#55926,1.); +#55926 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#55927 = ORIENTED_EDGE('',*,*,#55928,.T.); +#55928 = EDGE_CURVE('',#55921,#55929,#55931,.T.); +#55929 = VERTEX_POINT('',#55930); +#55930 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#55931 = LINE('',#55932,#55933); +#55932 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#55933 = VECTOR('',#55934,1.); +#55934 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#55935 = ORIENTED_EDGE('',*,*,#55936,.T.); +#55936 = EDGE_CURVE('',#55929,#55937,#55939,.T.); +#55937 = VERTEX_POINT('',#55938); +#55938 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#55939 = LINE('',#55940,#55941); +#55940 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#55941 = VECTOR('',#55942,1.); +#55942 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#55943 = ORIENTED_EDGE('',*,*,#55944,.T.); +#55944 = EDGE_CURVE('',#55937,#55945,#55947,.T.); +#55945 = VERTEX_POINT('',#55946); +#55946 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#55947 = LINE('',#55948,#55949); +#55948 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#55949 = VECTOR('',#55950,1.); +#55950 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#55951 = ORIENTED_EDGE('',*,*,#55952,.T.); +#55952 = EDGE_CURVE('',#55945,#55953,#55955,.T.); +#55953 = VERTEX_POINT('',#55954); +#55954 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#55955 = LINE('',#55956,#55957); +#55956 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#55957 = VECTOR('',#55958,1.); +#55958 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#55959 = ORIENTED_EDGE('',*,*,#55960,.T.); +#55960 = EDGE_CURVE('',#55953,#55961,#55963,.T.); +#55961 = VERTEX_POINT('',#55962); +#55962 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#55963 = LINE('',#55964,#55965); +#55964 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#55965 = VECTOR('',#55966,1.); +#55966 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#55967 = ORIENTED_EDGE('',*,*,#55968,.T.); +#55968 = EDGE_CURVE('',#55961,#55882,#55969,.T.); +#55969 = LINE('',#55970,#55971); +#55970 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#55971 = VECTOR('',#55972,1.); +#55972 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#55973 = PLANE('',#55974); +#55974 = AXIS2_PLACEMENT_3D('',#55975,#55976,#55977); +#55975 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#55976 = DIRECTION('',(0.,0.,1.)); +#55977 = DIRECTION('',(0.436587433964,-0.899661832304,0.)); +#55978 = ADVANCED_FACE('',(#55979),#55996,.F.); +#55979 = FACE_BOUND('',#55980,.F.); +#55980 = EDGE_LOOP('',(#55981,#55982,#55989,#55995)); +#55981 = ORIENTED_EDGE('',*,*,#55920,.T.); +#55982 = ORIENTED_EDGE('',*,*,#55983,.T.); +#55983 = EDGE_CURVE('',#55921,#55984,#55986,.T.); +#55984 = VERTEX_POINT('',#55985); +#55985 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#55986 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#55987,#55988),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#55987 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#55988 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#55989 = ORIENTED_EDGE('',*,*,#55990,.F.); +#55990 = EDGE_CURVE('',#55892,#55984,#55991,.T.); +#55991 = LINE('',#55992,#55993); +#55992 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#55993 = VECTOR('',#55994,1.); +#55994 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#55995 = ORIENTED_EDGE('',*,*,#55891,.F.); +#55996 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#55997,#55998) + ,(#55999,#56000 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#55997 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#55998 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#55999 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#56000 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#56001 = ADVANCED_FACE('',(#56002),#56025,.F.); +#56002 = FACE_BOUND('',#56003,.F.); +#56003 = EDGE_LOOP('',(#56004,#56005,#56012,#56020)); +#56004 = ORIENTED_EDGE('',*,*,#55898,.T.); +#56005 = ORIENTED_EDGE('',*,*,#56006,.T.); +#56006 = EDGE_CURVE('',#55892,#56007,#56009,.T.); +#56007 = VERTEX_POINT('',#56008); +#56008 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#56009 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56010,#56011),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56010 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#56011 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#56012 = ORIENTED_EDGE('',*,*,#56013,.F.); +#56013 = EDGE_CURVE('',#56014,#56007,#56016,.T.); +#56014 = VERTEX_POINT('',#56015); +#56015 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#56016 = LINE('',#56017,#56018); +#56017 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#56018 = VECTOR('',#56019,1.); +#56019 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56020 = ORIENTED_EDGE('',*,*,#56021,.F.); +#56021 = EDGE_CURVE('',#55899,#56014,#56022,.T.); +#56022 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56023,#56024),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56023 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#56024 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#56025 = PLANE('',#56026); +#56026 = AXIS2_PLACEMENT_3D('',#56027,#56028,#56029); +#56027 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#56028 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56029 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56030 = ADVANCED_FACE('',(#56031),#56048,.F.); +#56031 = FACE_BOUND('',#56032,.F.); +#56032 = EDGE_LOOP('',(#56033,#56034,#56035,#56043)); +#56033 = ORIENTED_EDGE('',*,*,#55968,.T.); +#56034 = ORIENTED_EDGE('',*,*,#55906,.T.); +#56035 = ORIENTED_EDGE('',*,*,#56036,.F.); +#56036 = EDGE_CURVE('',#56037,#55899,#56039,.T.); +#56037 = VERTEX_POINT('',#56038); +#56038 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#56039 = LINE('',#56040,#56041); +#56040 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#56041 = VECTOR('',#56042,1.); +#56042 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#56043 = ORIENTED_EDGE('',*,*,#56044,.F.); +#56044 = EDGE_CURVE('',#55961,#56037,#56045,.T.); +#56045 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56046,#56047),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56046 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#56047 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#56048 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56049,#56050) + ,(#56051,#56052 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#56049 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#56050 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#56051 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#56052 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#56053 = ADVANCED_FACE('',(#56054),#56119,.F.); +#56054 = FACE_BOUND('',#56055,.F.); +#56055 = EDGE_LOOP('',(#56056,#56057,#56058,#56066,#56074,#56082,#56090, + #56098,#56106,#56114)); +#56056 = ORIENTED_EDGE('',*,*,#55960,.T.); +#56057 = ORIENTED_EDGE('',*,*,#56044,.T.); +#56058 = ORIENTED_EDGE('',*,*,#56059,.F.); +#56059 = EDGE_CURVE('',#56060,#56037,#56062,.T.); +#56060 = VERTEX_POINT('',#56061); +#56061 = CARTESIAN_POINT('',(-0.8,1.2,0.75)); +#56062 = LINE('',#56063,#56064); +#56063 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56064 = VECTOR('',#56065,1.); +#56065 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56066 = ORIENTED_EDGE('',*,*,#56067,.F.); +#56067 = EDGE_CURVE('',#56068,#56060,#56070,.T.); +#56068 = VERTEX_POINT('',#56069); +#56069 = CARTESIAN_POINT('',(-0.8,0.7,0.75)); +#56070 = LINE('',#56071,#56072); +#56071 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56072 = VECTOR('',#56073,1.); +#56073 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56074 = ORIENTED_EDGE('',*,*,#56075,.F.); +#56075 = EDGE_CURVE('',#56076,#56068,#56078,.T.); +#56076 = VERTEX_POINT('',#56077); +#56077 = CARTESIAN_POINT('',(-0.8,0.25,0.75)); +#56078 = LINE('',#56079,#56080); +#56079 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56080 = VECTOR('',#56081,1.); +#56081 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56082 = ORIENTED_EDGE('',*,*,#56083,.F.); +#56083 = EDGE_CURVE('',#56084,#56076,#56086,.T.); +#56084 = VERTEX_POINT('',#56085); +#56085 = CARTESIAN_POINT('',(-0.8,-0.25,0.75)); +#56086 = LINE('',#56087,#56088); +#56087 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56088 = VECTOR('',#56089,1.); +#56089 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56090 = ORIENTED_EDGE('',*,*,#56091,.F.); +#56091 = EDGE_CURVE('',#56092,#56084,#56094,.T.); +#56092 = VERTEX_POINT('',#56093); +#56093 = CARTESIAN_POINT('',(-0.8,-0.7,0.75)); +#56094 = LINE('',#56095,#56096); +#56095 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56096 = VECTOR('',#56097,1.); +#56097 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56098 = ORIENTED_EDGE('',*,*,#56099,.F.); +#56099 = EDGE_CURVE('',#56100,#56092,#56102,.T.); +#56100 = VERTEX_POINT('',#56101); +#56101 = CARTESIAN_POINT('',(-0.8,-1.2,0.75)); +#56102 = LINE('',#56103,#56104); +#56103 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56104 = VECTOR('',#56105,1.); +#56105 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56106 = ORIENTED_EDGE('',*,*,#56107,.F.); +#56107 = EDGE_CURVE('',#56108,#56100,#56110,.T.); +#56108 = VERTEX_POINT('',#56109); +#56109 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56110 = LINE('',#56111,#56112); +#56111 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56112 = VECTOR('',#56113,1.); +#56113 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56114 = ORIENTED_EDGE('',*,*,#56115,.F.); +#56115 = EDGE_CURVE('',#55953,#56108,#56116,.T.); +#56116 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56117,#56118),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56117 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#56118 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56119 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56120,#56121) + ,(#56122,#56123 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56120 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#56121 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56122 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#56123 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#56124 = ADVANCED_FACE('',(#56125),#56174,.F.); +#56125 = FACE_BOUND('',#56126,.F.); +#56126 = EDGE_LOOP('',(#56127,#56128,#56135,#56143,#56151,#56159,#56167, + #56173)); +#56127 = ORIENTED_EDGE('',*,*,#55928,.T.); +#56128 = ORIENTED_EDGE('',*,*,#56129,.T.); +#56129 = EDGE_CURVE('',#55929,#56130,#56132,.T.); +#56130 = VERTEX_POINT('',#56131); +#56131 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#56132 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56133,#56134),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56133 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#56134 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#56135 = ORIENTED_EDGE('',*,*,#56136,.F.); +#56136 = EDGE_CURVE('',#56137,#56130,#56139,.T.); +#56137 = VERTEX_POINT('',#56138); +#56138 = CARTESIAN_POINT('',(0.8,-1.2,0.75)); +#56139 = LINE('',#56140,#56141); +#56140 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#56141 = VECTOR('',#56142,1.); +#56142 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56143 = ORIENTED_EDGE('',*,*,#56144,.F.); +#56144 = EDGE_CURVE('',#56145,#56137,#56147,.T.); +#56145 = VERTEX_POINT('',#56146); +#56146 = CARTESIAN_POINT('',(0.8,-0.7,0.75)); +#56147 = LINE('',#56148,#56149); +#56148 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#56149 = VECTOR('',#56150,1.); +#56150 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56151 = ORIENTED_EDGE('',*,*,#56152,.F.); +#56152 = EDGE_CURVE('',#56153,#56145,#56155,.T.); +#56153 = VERTEX_POINT('',#56154); +#56154 = CARTESIAN_POINT('',(0.8,0.7,0.75)); +#56155 = LINE('',#56156,#56157); +#56156 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#56157 = VECTOR('',#56158,1.); +#56158 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56159 = ORIENTED_EDGE('',*,*,#56160,.F.); +#56160 = EDGE_CURVE('',#56161,#56153,#56163,.T.); +#56161 = VERTEX_POINT('',#56162); +#56162 = CARTESIAN_POINT('',(0.8,1.2,0.75)); +#56163 = LINE('',#56164,#56165); +#56164 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#56165 = VECTOR('',#56166,1.); +#56166 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56167 = ORIENTED_EDGE('',*,*,#56168,.F.); +#56168 = EDGE_CURVE('',#55984,#56161,#56169,.T.); +#56169 = LINE('',#56170,#56171); +#56170 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#56171 = VECTOR('',#56172,1.); +#56172 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56173 = ORIENTED_EDGE('',*,*,#55983,.F.); +#56174 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56175,#56176) + ,(#56177,#56178 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56175 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#56176 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#56177 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#56178 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#56179 = ADVANCED_FACE('',(#56180),#56197,.F.); +#56180 = FACE_BOUND('',#56181,.F.); +#56181 = EDGE_LOOP('',(#56182,#56183,#56184,#56192)); +#56182 = ORIENTED_EDGE('',*,*,#55952,.T.); +#56183 = ORIENTED_EDGE('',*,*,#56115,.T.); +#56184 = ORIENTED_EDGE('',*,*,#56185,.F.); +#56185 = EDGE_CURVE('',#56186,#56108,#56188,.T.); +#56186 = VERTEX_POINT('',#56187); +#56187 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#56188 = LINE('',#56189,#56190); +#56189 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#56190 = VECTOR('',#56191,1.); +#56191 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#56192 = ORIENTED_EDGE('',*,*,#56193,.F.); +#56193 = EDGE_CURVE('',#55945,#56186,#56194,.T.); +#56194 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56195,#56196),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56195 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#56196 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#56197 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56198,#56199) + ,(#56200,#56201 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#56198 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#56199 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#56200 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#56201 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56202 = ADVANCED_FACE('',(#56203),#56220,.F.); +#56203 = FACE_BOUND('',#56204,.F.); +#56204 = EDGE_LOOP('',(#56205,#56206,#56213,#56219)); +#56205 = ORIENTED_EDGE('',*,*,#55936,.T.); +#56206 = ORIENTED_EDGE('',*,*,#56207,.T.); +#56207 = EDGE_CURVE('',#55937,#56208,#56210,.T.); +#56208 = VERTEX_POINT('',#56209); +#56209 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#56210 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56211,#56212),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56211 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#56212 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#56213 = ORIENTED_EDGE('',*,*,#56214,.F.); +#56214 = EDGE_CURVE('',#56130,#56208,#56215,.T.); +#56215 = LINE('',#56216,#56217); +#56216 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#56217 = VECTOR('',#56218,1.); +#56218 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#56219 = ORIENTED_EDGE('',*,*,#56129,.F.); +#56220 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56221,#56222) + ,(#56223,#56224 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#56221 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#56222 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#56223 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#56224 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#56225 = ADVANCED_FACE('',(#56226),#56237,.F.); +#56226 = FACE_BOUND('',#56227,.F.); +#56227 = EDGE_LOOP('',(#56228,#56229,#56230,#56236)); +#56228 = ORIENTED_EDGE('',*,*,#55944,.T.); +#56229 = ORIENTED_EDGE('',*,*,#56193,.T.); +#56230 = ORIENTED_EDGE('',*,*,#56231,.F.); +#56231 = EDGE_CURVE('',#56208,#56186,#56232,.T.); +#56232 = LINE('',#56233,#56234); +#56233 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#56234 = VECTOR('',#56235,1.); +#56235 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56236 = ORIENTED_EDGE('',*,*,#56207,.F.); +#56237 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56238,#56239) + ,(#56240,#56241 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56238 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#56239 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#56240 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#56241 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#56242 = ADVANCED_FACE('',(#56243),#56260,.F.); +#56243 = FACE_BOUND('',#56244,.F.); +#56244 = EDGE_LOOP('',(#56245,#56246,#56253,#56259)); +#56245 = ORIENTED_EDGE('',*,*,#55990,.T.); +#56246 = ORIENTED_EDGE('',*,*,#56247,.T.); +#56247 = EDGE_CURVE('',#55984,#56248,#56250,.T.); +#56248 = VERTEX_POINT('',#56249); +#56249 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#56250 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56251,#56252),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56251 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#56252 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#56253 = ORIENTED_EDGE('',*,*,#56254,.F.); +#56254 = EDGE_CURVE('',#56007,#56248,#56255,.T.); +#56255 = LINE('',#56256,#56257); +#56256 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#56257 = VECTOR('',#56258,1.); +#56258 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#56259 = ORIENTED_EDGE('',*,*,#56006,.F.); +#56260 = PLANE('',#56261); +#56261 = AXIS2_PLACEMENT_3D('',#56262,#56263,#56264); +#56262 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#56263 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#56264 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#56265 = ADVANCED_FACE('',(#56266),#56348,.F.); +#56266 = FACE_BOUND('',#56267,.F.); +#56267 = EDGE_LOOP('',(#56268,#56276,#56277,#56278,#56286,#56294,#56302, + #56310,#56318,#56326,#56334,#56342)); +#56268 = ORIENTED_EDGE('',*,*,#56269,.T.); +#56269 = EDGE_CURVE('',#56270,#56014,#56272,.T.); +#56270 = VERTEX_POINT('',#56271); +#56271 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#56272 = LINE('',#56273,#56274); +#56273 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#56274 = VECTOR('',#56275,1.); +#56275 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#56276 = ORIENTED_EDGE('',*,*,#56013,.T.); +#56277 = ORIENTED_EDGE('',*,*,#56254,.T.); +#56278 = ORIENTED_EDGE('',*,*,#56279,.T.); +#56279 = EDGE_CURVE('',#56248,#56280,#56282,.T.); +#56280 = VERTEX_POINT('',#56281); +#56281 = CARTESIAN_POINT('',(0.8,1.2,0.9)); +#56282 = LINE('',#56283,#56284); +#56283 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#56284 = VECTOR('',#56285,1.); +#56285 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56286 = ORIENTED_EDGE('',*,*,#56287,.T.); +#56287 = EDGE_CURVE('',#56280,#56288,#56290,.T.); +#56288 = VERTEX_POINT('',#56289); +#56289 = CARTESIAN_POINT('',(0.775,1.2,0.9)); +#56290 = LINE('',#56291,#56292); +#56291 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#56292 = VECTOR('',#56293,1.); +#56293 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56294 = ORIENTED_EDGE('',*,*,#56295,.F.); +#56295 = EDGE_CURVE('',#56296,#56288,#56298,.T.); +#56296 = VERTEX_POINT('',#56297); +#56297 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#56298 = LINE('',#56299,#56300); +#56299 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#56300 = VECTOR('',#56301,1.); +#56301 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56302 = ORIENTED_EDGE('',*,*,#56303,.F.); +#56303 = EDGE_CURVE('',#56304,#56296,#56306,.T.); +#56304 = VERTEX_POINT('',#56305); +#56305 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#56306 = LINE('',#56307,#56308); +#56307 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#56308 = VECTOR('',#56309,1.); +#56309 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#56310 = ORIENTED_EDGE('',*,*,#56311,.F.); +#56311 = EDGE_CURVE('',#56312,#56304,#56314,.T.); +#56312 = VERTEX_POINT('',#56313); +#56313 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#56314 = LINE('',#56315,#56316); +#56315 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#56316 = VECTOR('',#56317,1.); +#56317 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56318 = ORIENTED_EDGE('',*,*,#56319,.F.); +#56319 = EDGE_CURVE('',#56320,#56312,#56322,.T.); +#56320 = VERTEX_POINT('',#56321); +#56321 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#56322 = LINE('',#56323,#56324); +#56323 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#56324 = VECTOR('',#56325,1.); +#56325 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#56326 = ORIENTED_EDGE('',*,*,#56327,.F.); +#56327 = EDGE_CURVE('',#56328,#56320,#56330,.T.); +#56328 = VERTEX_POINT('',#56329); +#56329 = CARTESIAN_POINT('',(-0.775,1.2,0.9)); +#56330 = LINE('',#56331,#56332); +#56331 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56332 = VECTOR('',#56333,1.); +#56333 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56334 = ORIENTED_EDGE('',*,*,#56335,.F.); +#56335 = EDGE_CURVE('',#56336,#56328,#56338,.T.); +#56336 = VERTEX_POINT('',#56337); +#56337 = CARTESIAN_POINT('',(-0.8,1.2,0.9)); +#56338 = LINE('',#56339,#56340); +#56339 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#56340 = VECTOR('',#56341,1.); +#56341 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56342 = ORIENTED_EDGE('',*,*,#56343,.T.); +#56343 = EDGE_CURVE('',#56336,#56270,#56344,.T.); +#56344 = LINE('',#56345,#56346); +#56345 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56346 = VECTOR('',#56347,1.); +#56347 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56348 = PLANE('',#56349); +#56349 = AXIS2_PLACEMENT_3D('',#56350,#56351,#56352); +#56350 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#56351 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#56352 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#56353 = ADVANCED_FACE('',(#56354),#56364,.F.); +#56354 = FACE_BOUND('',#56355,.F.); +#56355 = EDGE_LOOP('',(#56356,#56357,#56358,#56359)); +#56356 = ORIENTED_EDGE('',*,*,#56036,.T.); +#56357 = ORIENTED_EDGE('',*,*,#56021,.T.); +#56358 = ORIENTED_EDGE('',*,*,#56269,.F.); +#56359 = ORIENTED_EDGE('',*,*,#56360,.F.); +#56360 = EDGE_CURVE('',#56037,#56270,#56361,.T.); +#56361 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56362,#56363),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56362 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#56363 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#56364 = PLANE('',#56365); +#56365 = AXIS2_PLACEMENT_3D('',#56366,#56367,#56368); +#56366 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#56367 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#56368 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#56369 = ADVANCED_FACE('',(#56370),#56394,.F.); +#56370 = FACE_BOUND('',#56371,.F.); +#56371 = EDGE_LOOP('',(#56372,#56379,#56380,#56388)); +#56372 = ORIENTED_EDGE('',*,*,#56373,.F.); +#56373 = EDGE_CURVE('',#56108,#56374,#56376,.T.); +#56374 = VERTEX_POINT('',#56375); +#56375 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56376 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56377,#56378),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56377 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#56378 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56379 = ORIENTED_EDGE('',*,*,#56107,.T.); +#56380 = ORIENTED_EDGE('',*,*,#56381,.T.); +#56381 = EDGE_CURVE('',#56100,#56382,#56384,.T.); +#56382 = VERTEX_POINT('',#56383); +#56383 = CARTESIAN_POINT('',(-0.8,-1.2,0.9)); +#56384 = LINE('',#56385,#56386); +#56385 = CARTESIAN_POINT('',(-0.8,-1.2,0.670847817658)); +#56386 = VECTOR('',#56387,1.); +#56387 = DIRECTION('',(0.,0.,1.)); +#56388 = ORIENTED_EDGE('',*,*,#56389,.F.); +#56389 = EDGE_CURVE('',#56374,#56382,#56390,.T.); +#56390 = LINE('',#56391,#56392); +#56391 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56392 = VECTOR('',#56393,1.); +#56393 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56394 = PLANE('',#56395); +#56395 = AXIS2_PLACEMENT_3D('',#56396,#56397,#56398); +#56396 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56397 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56398 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56399 = ADVANCED_FACE('',(#56400),#56425,.F.); +#56400 = FACE_BOUND('',#56401,.F.); +#56401 = EDGE_LOOP('',(#56402,#56410,#56411,#56419)); +#56402 = ORIENTED_EDGE('',*,*,#56403,.F.); +#56403 = EDGE_CURVE('',#56100,#56404,#56406,.T.); +#56404 = VERTEX_POINT('',#56405); +#56405 = CARTESIAN_POINT('',(-0.85,-1.2,0.75)); +#56406 = LINE('',#56407,#56408); +#56407 = CARTESIAN_POINT('',(-0.75,-1.2,0.75)); +#56408 = VECTOR('',#56409,1.); +#56409 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56410 = ORIENTED_EDGE('',*,*,#56099,.T.); +#56411 = ORIENTED_EDGE('',*,*,#56412,.T.); +#56412 = EDGE_CURVE('',#56092,#56413,#56415,.T.); +#56413 = VERTEX_POINT('',#56414); +#56414 = CARTESIAN_POINT('',(-0.85,-0.7,0.75)); +#56415 = LINE('',#56416,#56417); +#56416 = CARTESIAN_POINT('',(-0.75,-0.7,0.75)); +#56417 = VECTOR('',#56418,1.); +#56418 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56419 = ORIENTED_EDGE('',*,*,#56420,.F.); +#56420 = EDGE_CURVE('',#56404,#56413,#56421,.T.); +#56421 = LINE('',#56422,#56423); +#56422 = CARTESIAN_POINT('',(-0.85,-1.2,0.75)); +#56423 = VECTOR('',#56424,1.); +#56424 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56425 = PLANE('',#56426); +#56426 = AXIS2_PLACEMENT_3D('',#56427,#56428,#56429); +#56427 = CARTESIAN_POINT('',(-0.75,-1.2,0.75)); +#56428 = DIRECTION('',(0.,0.,1.)); +#56429 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56430 = ADVANCED_FACE('',(#56431),#56456,.F.); +#56431 = FACE_BOUND('',#56432,.F.); +#56432 = EDGE_LOOP('',(#56433,#56441,#56442,#56450)); +#56433 = ORIENTED_EDGE('',*,*,#56434,.F.); +#56434 = EDGE_CURVE('',#56092,#56435,#56437,.T.); +#56435 = VERTEX_POINT('',#56436); +#56436 = CARTESIAN_POINT('',(-0.8,-0.7,0.9)); +#56437 = LINE('',#56438,#56439); +#56438 = CARTESIAN_POINT('',(-0.8,-0.7,0.670847817658)); +#56439 = VECTOR('',#56440,1.); +#56440 = DIRECTION('',(0.,0.,1.)); +#56441 = ORIENTED_EDGE('',*,*,#56091,.T.); +#56442 = ORIENTED_EDGE('',*,*,#56443,.T.); +#56443 = EDGE_CURVE('',#56084,#56444,#56446,.T.); +#56444 = VERTEX_POINT('',#56445); +#56445 = CARTESIAN_POINT('',(-0.8,-0.25,0.9)); +#56446 = LINE('',#56447,#56448); +#56447 = CARTESIAN_POINT('',(-0.8,-0.25,0.670847817658)); +#56448 = VECTOR('',#56449,1.); +#56449 = DIRECTION('',(0.,0.,1.)); +#56450 = ORIENTED_EDGE('',*,*,#56451,.F.); +#56451 = EDGE_CURVE('',#56435,#56444,#56452,.T.); +#56452 = LINE('',#56453,#56454); +#56453 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56454 = VECTOR('',#56455,1.); +#56455 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56456 = PLANE('',#56457); +#56457 = AXIS2_PLACEMENT_3D('',#56458,#56459,#56460); +#56458 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56459 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56460 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56461 = ADVANCED_FACE('',(#56462),#56487,.F.); +#56462 = FACE_BOUND('',#56463,.F.); +#56463 = EDGE_LOOP('',(#56464,#56472,#56473,#56481)); +#56464 = ORIENTED_EDGE('',*,*,#56465,.F.); +#56465 = EDGE_CURVE('',#56084,#56466,#56468,.T.); +#56466 = VERTEX_POINT('',#56467); +#56467 = CARTESIAN_POINT('',(-0.85,-0.25,0.75)); +#56468 = LINE('',#56469,#56470); +#56469 = CARTESIAN_POINT('',(-0.75,-0.25,0.75)); +#56470 = VECTOR('',#56471,1.); +#56471 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56472 = ORIENTED_EDGE('',*,*,#56083,.T.); +#56473 = ORIENTED_EDGE('',*,*,#56474,.T.); +#56474 = EDGE_CURVE('',#56076,#56475,#56477,.T.); +#56475 = VERTEX_POINT('',#56476); +#56476 = CARTESIAN_POINT('',(-0.85,0.25,0.75)); +#56477 = LINE('',#56478,#56479); +#56478 = CARTESIAN_POINT('',(-0.75,0.25,0.75)); +#56479 = VECTOR('',#56480,1.); +#56480 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56481 = ORIENTED_EDGE('',*,*,#56482,.F.); +#56482 = EDGE_CURVE('',#56466,#56475,#56483,.T.); +#56483 = LINE('',#56484,#56485); +#56484 = CARTESIAN_POINT('',(-0.85,-0.25,0.75)); +#56485 = VECTOR('',#56486,1.); +#56486 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56487 = PLANE('',#56488); +#56488 = AXIS2_PLACEMENT_3D('',#56489,#56490,#56491); +#56489 = CARTESIAN_POINT('',(-0.75,-0.25,0.75)); +#56490 = DIRECTION('',(0.,0.,1.)); +#56491 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56492 = ADVANCED_FACE('',(#56493),#56518,.F.); +#56493 = FACE_BOUND('',#56494,.F.); +#56494 = EDGE_LOOP('',(#56495,#56503,#56504,#56512)); +#56495 = ORIENTED_EDGE('',*,*,#56496,.F.); +#56496 = EDGE_CURVE('',#56076,#56497,#56499,.T.); +#56497 = VERTEX_POINT('',#56498); +#56498 = CARTESIAN_POINT('',(-0.8,0.25,0.9)); +#56499 = LINE('',#56500,#56501); +#56500 = CARTESIAN_POINT('',(-0.8,0.25,0.670847817658)); +#56501 = VECTOR('',#56502,1.); +#56502 = DIRECTION('',(0.,0.,1.)); +#56503 = ORIENTED_EDGE('',*,*,#56075,.T.); +#56504 = ORIENTED_EDGE('',*,*,#56505,.T.); +#56505 = EDGE_CURVE('',#56068,#56506,#56508,.T.); +#56506 = VERTEX_POINT('',#56507); +#56507 = CARTESIAN_POINT('',(-0.8,0.7,0.9)); +#56508 = LINE('',#56509,#56510); +#56509 = CARTESIAN_POINT('',(-0.8,0.7,0.670847817658)); +#56510 = VECTOR('',#56511,1.); +#56511 = DIRECTION('',(0.,0.,1.)); +#56512 = ORIENTED_EDGE('',*,*,#56513,.F.); +#56513 = EDGE_CURVE('',#56497,#56506,#56514,.T.); +#56514 = LINE('',#56515,#56516); +#56515 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56516 = VECTOR('',#56517,1.); +#56517 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56518 = PLANE('',#56519); +#56519 = AXIS2_PLACEMENT_3D('',#56520,#56521,#56522); +#56520 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56521 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56522 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56523 = ADVANCED_FACE('',(#56524),#56549,.F.); +#56524 = FACE_BOUND('',#56525,.F.); +#56525 = EDGE_LOOP('',(#56526,#56534,#56535,#56543)); +#56526 = ORIENTED_EDGE('',*,*,#56527,.F.); +#56527 = EDGE_CURVE('',#56068,#56528,#56530,.T.); +#56528 = VERTEX_POINT('',#56529); +#56529 = CARTESIAN_POINT('',(-0.85,0.7,0.75)); +#56530 = LINE('',#56531,#56532); +#56531 = CARTESIAN_POINT('',(-0.75,0.7,0.75)); +#56532 = VECTOR('',#56533,1.); +#56533 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56534 = ORIENTED_EDGE('',*,*,#56067,.T.); +#56535 = ORIENTED_EDGE('',*,*,#56536,.T.); +#56536 = EDGE_CURVE('',#56060,#56537,#56539,.T.); +#56537 = VERTEX_POINT('',#56538); +#56538 = CARTESIAN_POINT('',(-0.85,1.2,0.75)); +#56539 = LINE('',#56540,#56541); +#56540 = CARTESIAN_POINT('',(-0.75,1.2,0.75)); +#56541 = VECTOR('',#56542,1.); +#56542 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56543 = ORIENTED_EDGE('',*,*,#56544,.F.); +#56544 = EDGE_CURVE('',#56528,#56537,#56545,.T.); +#56545 = LINE('',#56546,#56547); +#56546 = CARTESIAN_POINT('',(-0.85,0.7,0.75)); +#56547 = VECTOR('',#56548,1.); +#56548 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56549 = PLANE('',#56550); +#56550 = AXIS2_PLACEMENT_3D('',#56551,#56552,#56553); +#56551 = CARTESIAN_POINT('',(-0.75,0.7,0.75)); +#56552 = DIRECTION('',(0.,0.,1.)); +#56553 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#56554 = ADVANCED_FACE('',(#56555),#56566,.F.); +#56555 = FACE_BOUND('',#56556,.F.); +#56556 = EDGE_LOOP('',(#56557,#56563,#56564,#56565)); +#56557 = ORIENTED_EDGE('',*,*,#56558,.F.); +#56558 = EDGE_CURVE('',#56060,#56336,#56559,.T.); +#56559 = LINE('',#56560,#56561); +#56560 = CARTESIAN_POINT('',(-0.8,1.2,0.670847817658)); +#56561 = VECTOR('',#56562,1.); +#56562 = DIRECTION('',(0.,0.,1.)); +#56563 = ORIENTED_EDGE('',*,*,#56059,.T.); +#56564 = ORIENTED_EDGE('',*,*,#56360,.T.); +#56565 = ORIENTED_EDGE('',*,*,#56343,.F.); +#56566 = PLANE('',#56567); +#56567 = AXIS2_PLACEMENT_3D('',#56568,#56569,#56570); +#56568 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#56569 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56570 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56571 = ADVANCED_FACE('',(#56572),#56583,.F.); +#56572 = FACE_BOUND('',#56573,.F.); +#56573 = EDGE_LOOP('',(#56574,#56575,#56576,#56582)); +#56574 = ORIENTED_EDGE('',*,*,#56247,.F.); +#56575 = ORIENTED_EDGE('',*,*,#56168,.T.); +#56576 = ORIENTED_EDGE('',*,*,#56577,.T.); +#56577 = EDGE_CURVE('',#56161,#56280,#56578,.T.); +#56578 = LINE('',#56579,#56580); +#56579 = CARTESIAN_POINT('',(0.8,1.2,0.670847817658)); +#56580 = VECTOR('',#56581,1.); +#56581 = DIRECTION('',(0.,0.,1.)); +#56582 = ORIENTED_EDGE('',*,*,#56279,.F.); +#56583 = PLANE('',#56584); +#56584 = AXIS2_PLACEMENT_3D('',#56585,#56586,#56587); +#56585 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#56586 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56587 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56588 = ADVANCED_FACE('',(#56589),#56614,.F.); +#56589 = FACE_BOUND('',#56590,.F.); +#56590 = EDGE_LOOP('',(#56591,#56599,#56600,#56608)); +#56591 = ORIENTED_EDGE('',*,*,#56592,.F.); +#56592 = EDGE_CURVE('',#56161,#56593,#56595,.T.); +#56593 = VERTEX_POINT('',#56594); +#56594 = CARTESIAN_POINT('',(0.85,1.2,0.75)); +#56595 = LINE('',#56596,#56597); +#56596 = CARTESIAN_POINT('',(0.75,1.2,0.75)); +#56597 = VECTOR('',#56598,1.); +#56598 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56599 = ORIENTED_EDGE('',*,*,#56160,.T.); +#56600 = ORIENTED_EDGE('',*,*,#56601,.T.); +#56601 = EDGE_CURVE('',#56153,#56602,#56604,.T.); +#56602 = VERTEX_POINT('',#56603); +#56603 = CARTESIAN_POINT('',(0.85,0.7,0.75)); +#56604 = LINE('',#56605,#56606); +#56605 = CARTESIAN_POINT('',(0.75,0.7,0.75)); +#56606 = VECTOR('',#56607,1.); +#56607 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56608 = ORIENTED_EDGE('',*,*,#56609,.F.); +#56609 = EDGE_CURVE('',#56593,#56602,#56610,.T.); +#56610 = LINE('',#56611,#56612); +#56611 = CARTESIAN_POINT('',(0.85,1.2,0.75)); +#56612 = VECTOR('',#56613,1.); +#56613 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56614 = PLANE('',#56615); +#56615 = AXIS2_PLACEMENT_3D('',#56616,#56617,#56618); +#56616 = CARTESIAN_POINT('',(0.75,1.2,0.75)); +#56617 = DIRECTION('',(0.,0.,1.)); +#56618 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#56619 = ADVANCED_FACE('',(#56620),#56645,.F.); +#56620 = FACE_BOUND('',#56621,.F.); +#56621 = EDGE_LOOP('',(#56622,#56630,#56631,#56639)); +#56622 = ORIENTED_EDGE('',*,*,#56623,.F.); +#56623 = EDGE_CURVE('',#56153,#56624,#56626,.T.); +#56624 = VERTEX_POINT('',#56625); +#56625 = CARTESIAN_POINT('',(0.8,0.7,0.9)); +#56626 = LINE('',#56627,#56628); +#56627 = CARTESIAN_POINT('',(0.8,0.7,0.670847817658)); +#56628 = VECTOR('',#56629,1.); +#56629 = DIRECTION('',(0.,0.,1.)); +#56630 = ORIENTED_EDGE('',*,*,#56152,.T.); +#56631 = ORIENTED_EDGE('',*,*,#56632,.T.); +#56632 = EDGE_CURVE('',#56145,#56633,#56635,.T.); +#56633 = VERTEX_POINT('',#56634); +#56634 = CARTESIAN_POINT('',(0.8,-0.7,0.9)); +#56635 = LINE('',#56636,#56637); +#56636 = CARTESIAN_POINT('',(0.8,-0.7,0.670847817658)); +#56637 = VECTOR('',#56638,1.); +#56638 = DIRECTION('',(0.,0.,1.)); +#56639 = ORIENTED_EDGE('',*,*,#56640,.F.); +#56640 = EDGE_CURVE('',#56624,#56633,#56641,.T.); +#56641 = LINE('',#56642,#56643); +#56642 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#56643 = VECTOR('',#56644,1.); +#56644 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56645 = PLANE('',#56646); +#56646 = AXIS2_PLACEMENT_3D('',#56647,#56648,#56649); +#56647 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#56648 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56649 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56650 = ADVANCED_FACE('',(#56651),#56676,.F.); +#56651 = FACE_BOUND('',#56652,.F.); +#56652 = EDGE_LOOP('',(#56653,#56661,#56662,#56670)); +#56653 = ORIENTED_EDGE('',*,*,#56654,.F.); +#56654 = EDGE_CURVE('',#56145,#56655,#56657,.T.); +#56655 = VERTEX_POINT('',#56656); +#56656 = CARTESIAN_POINT('',(0.85,-0.7,0.75)); +#56657 = LINE('',#56658,#56659); +#56658 = CARTESIAN_POINT('',(0.75,-0.7,0.75)); +#56659 = VECTOR('',#56660,1.); +#56660 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56661 = ORIENTED_EDGE('',*,*,#56144,.T.); +#56662 = ORIENTED_EDGE('',*,*,#56663,.T.); +#56663 = EDGE_CURVE('',#56137,#56664,#56666,.T.); +#56664 = VERTEX_POINT('',#56665); +#56665 = CARTESIAN_POINT('',(0.85,-1.2,0.75)); +#56666 = LINE('',#56667,#56668); +#56667 = CARTESIAN_POINT('',(0.75,-1.2,0.75)); +#56668 = VECTOR('',#56669,1.); +#56669 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56670 = ORIENTED_EDGE('',*,*,#56671,.F.); +#56671 = EDGE_CURVE('',#56655,#56664,#56672,.T.); +#56672 = LINE('',#56673,#56674); +#56673 = CARTESIAN_POINT('',(0.85,-0.7,0.75)); +#56674 = VECTOR('',#56675,1.); +#56675 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56676 = PLANE('',#56677); +#56677 = AXIS2_PLACEMENT_3D('',#56678,#56679,#56680); +#56678 = CARTESIAN_POINT('',(0.75,-0.7,0.75)); +#56679 = DIRECTION('',(0.,0.,1.)); +#56680 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#56681 = ADVANCED_FACE('',(#56682),#56706,.F.); +#56682 = FACE_BOUND('',#56683,.F.); +#56683 = EDGE_LOOP('',(#56684,#56692,#56693,#56700)); +#56684 = ORIENTED_EDGE('',*,*,#56685,.F.); +#56685 = EDGE_CURVE('',#56137,#56686,#56688,.T.); +#56686 = VERTEX_POINT('',#56687); +#56687 = CARTESIAN_POINT('',(0.8,-1.2,0.9)); +#56688 = LINE('',#56689,#56690); +#56689 = CARTESIAN_POINT('',(0.8,-1.2,0.670847817658)); +#56690 = VECTOR('',#56691,1.); +#56691 = DIRECTION('',(0.,0.,1.)); +#56692 = ORIENTED_EDGE('',*,*,#56136,.T.); +#56693 = ORIENTED_EDGE('',*,*,#56694,.T.); +#56694 = EDGE_CURVE('',#56130,#56695,#56697,.T.); +#56695 = VERTEX_POINT('',#56696); +#56696 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#56697 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56698,#56699),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56698 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#56699 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#56700 = ORIENTED_EDGE('',*,*,#56701,.F.); +#56701 = EDGE_CURVE('',#56686,#56695,#56702,.T.); +#56702 = LINE('',#56703,#56704); +#56703 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#56704 = VECTOR('',#56705,1.); +#56705 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56706 = PLANE('',#56707); +#56707 = AXIS2_PLACEMENT_3D('',#56708,#56709,#56710); +#56708 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#56709 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56710 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56711 = ADVANCED_FACE('',(#56712),#56729,.F.); +#56712 = FACE_BOUND('',#56713,.F.); +#56713 = EDGE_LOOP('',(#56714,#56715,#56716,#56724)); +#56714 = ORIENTED_EDGE('',*,*,#56185,.T.); +#56715 = ORIENTED_EDGE('',*,*,#56373,.T.); +#56716 = ORIENTED_EDGE('',*,*,#56717,.F.); +#56717 = EDGE_CURVE('',#56718,#56374,#56720,.T.); +#56718 = VERTEX_POINT('',#56719); +#56719 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#56720 = LINE('',#56721,#56722); +#56721 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#56722 = VECTOR('',#56723,1.); +#56723 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#56724 = ORIENTED_EDGE('',*,*,#56725,.F.); +#56725 = EDGE_CURVE('',#56186,#56718,#56726,.T.); +#56726 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56727,#56728),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56727 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#56728 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#56729 = PLANE('',#56730); +#56730 = AXIS2_PLACEMENT_3D('',#56731,#56732,#56733); +#56731 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#56732 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#56733 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#56734 = ADVANCED_FACE('',(#56735),#56752,.F.); +#56735 = FACE_BOUND('',#56736,.F.); +#56736 = EDGE_LOOP('',(#56737,#56738,#56745,#56751)); +#56737 = ORIENTED_EDGE('',*,*,#56214,.T.); +#56738 = ORIENTED_EDGE('',*,*,#56739,.T.); +#56739 = EDGE_CURVE('',#56208,#56740,#56742,.T.); +#56740 = VERTEX_POINT('',#56741); +#56741 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#56742 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56743,#56744),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56743 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#56744 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#56745 = ORIENTED_EDGE('',*,*,#56746,.F.); +#56746 = EDGE_CURVE('',#56695,#56740,#56747,.T.); +#56747 = LINE('',#56748,#56749); +#56748 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#56749 = VECTOR('',#56750,1.); +#56750 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#56751 = ORIENTED_EDGE('',*,*,#56694,.F.); +#56752 = PLANE('',#56753); +#56753 = AXIS2_PLACEMENT_3D('',#56754,#56755,#56756); +#56754 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#56755 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#56756 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#56757 = ADVANCED_FACE('',(#56758),#56769,.F.); +#56758 = FACE_BOUND('',#56759,.F.); +#56759 = EDGE_LOOP('',(#56760,#56761,#56762,#56768)); +#56760 = ORIENTED_EDGE('',*,*,#56231,.T.); +#56761 = ORIENTED_EDGE('',*,*,#56725,.T.); +#56762 = ORIENTED_EDGE('',*,*,#56763,.F.); +#56763 = EDGE_CURVE('',#56740,#56718,#56764,.T.); +#56764 = LINE('',#56765,#56766); +#56765 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#56766 = VECTOR('',#56767,1.); +#56767 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56768 = ORIENTED_EDGE('',*,*,#56739,.F.); +#56769 = PLANE('',#56770); +#56770 = AXIS2_PLACEMENT_3D('',#56771,#56772,#56773); +#56771 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#56772 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56773 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#56774 = ADVANCED_FACE('',(#56775),#56814,.F.); +#56775 = FACE_BOUND('',#56776,.F.); +#56776 = EDGE_LOOP('',(#56777,#56785,#56793,#56799,#56800,#56808)); +#56777 = ORIENTED_EDGE('',*,*,#56778,.F.); +#56778 = EDGE_CURVE('',#56779,#56506,#56781,.T.); +#56779 = VERTEX_POINT('',#56780); +#56780 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#56781 = LINE('',#56782,#56783); +#56782 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#56783 = VECTOR('',#56784,1.); +#56784 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56785 = ORIENTED_EDGE('',*,*,#56786,.T.); +#56786 = EDGE_CURVE('',#56779,#56787,#56789,.T.); +#56787 = VERTEX_POINT('',#56788); +#56788 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#56789 = LINE('',#56790,#56791); +#56790 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#56791 = VECTOR('',#56792,1.); +#56792 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#56793 = ORIENTED_EDGE('',*,*,#56794,.T.); +#56794 = EDGE_CURVE('',#56787,#56336,#56795,.T.); +#56795 = LINE('',#56796,#56797); +#56796 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#56797 = VECTOR('',#56798,1.); +#56798 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56799 = ORIENTED_EDGE('',*,*,#56335,.T.); +#56800 = ORIENTED_EDGE('',*,*,#56801,.F.); +#56801 = EDGE_CURVE('',#56802,#56328,#56804,.T.); +#56802 = VERTEX_POINT('',#56803); +#56803 = CARTESIAN_POINT('',(-0.775,0.7,0.9)); +#56804 = LINE('',#56805,#56806); +#56805 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56806 = VECTOR('',#56807,1.); +#56807 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56808 = ORIENTED_EDGE('',*,*,#56809,.F.); +#56809 = EDGE_CURVE('',#56506,#56802,#56810,.T.); +#56810 = LINE('',#56811,#56812); +#56811 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#56812 = VECTOR('',#56813,1.); +#56813 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56814 = PLANE('',#56815); +#56815 = AXIS2_PLACEMENT_3D('',#56816,#56817,#56818); +#56816 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#56817 = DIRECTION('',(0.,0.,-1.)); +#56818 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#56819 = ADVANCED_FACE('',(#56820),#56884,.F.); +#56820 = FACE_BOUND('',#56821,.F.); +#56821 = EDGE_LOOP('',(#56822,#56832,#56840,#56848,#56856,#56862,#56863, + #56864,#56871,#56879)); +#56822 = ORIENTED_EDGE('',*,*,#56823,.T.); +#56823 = EDGE_CURVE('',#56824,#56826,#56828,.T.); +#56824 = VERTEX_POINT('',#56825); +#56825 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56826 = VERTEX_POINT('',#56827); +#56827 = CARTESIAN_POINT('',(-0.775,-1.2,0.9)); +#56828 = LINE('',#56829,#56830); +#56829 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56830 = VECTOR('',#56831,1.); +#56831 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56832 = ORIENTED_EDGE('',*,*,#56833,.T.); +#56833 = EDGE_CURVE('',#56826,#56834,#56836,.T.); +#56834 = VERTEX_POINT('',#56835); +#56835 = CARTESIAN_POINT('',(-0.775,-0.7,0.9)); +#56836 = LINE('',#56837,#56838); +#56837 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56838 = VECTOR('',#56839,1.); +#56839 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56840 = ORIENTED_EDGE('',*,*,#56841,.T.); +#56841 = EDGE_CURVE('',#56834,#56842,#56844,.T.); +#56842 = VERTEX_POINT('',#56843); +#56843 = CARTESIAN_POINT('',(-0.775,-0.25,0.9)); +#56844 = LINE('',#56845,#56846); +#56845 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56846 = VECTOR('',#56847,1.); +#56847 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56848 = ORIENTED_EDGE('',*,*,#56849,.T.); +#56849 = EDGE_CURVE('',#56842,#56850,#56852,.T.); +#56850 = VERTEX_POINT('',#56851); +#56851 = CARTESIAN_POINT('',(-0.775,0.25,0.9)); +#56852 = LINE('',#56853,#56854); +#56853 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56854 = VECTOR('',#56855,1.); +#56855 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56856 = ORIENTED_EDGE('',*,*,#56857,.T.); +#56857 = EDGE_CURVE('',#56850,#56802,#56858,.T.); +#56858 = LINE('',#56859,#56860); +#56859 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56860 = VECTOR('',#56861,1.); +#56861 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56862 = ORIENTED_EDGE('',*,*,#56801,.T.); +#56863 = ORIENTED_EDGE('',*,*,#56327,.T.); +#56864 = ORIENTED_EDGE('',*,*,#56865,.T.); +#56865 = EDGE_CURVE('',#56320,#56866,#56868,.T.); +#56866 = VERTEX_POINT('',#56867); +#56867 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#56868 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56869,#56870),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56869 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#56870 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#56871 = ORIENTED_EDGE('',*,*,#56872,.F.); +#56872 = EDGE_CURVE('',#56873,#56866,#56875,.T.); +#56873 = VERTEX_POINT('',#56874); +#56874 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#56875 = LINE('',#56876,#56877); +#56876 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#56877 = VECTOR('',#56878,1.); +#56878 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#56879 = ORIENTED_EDGE('',*,*,#56880,.F.); +#56880 = EDGE_CURVE('',#56824,#56873,#56881,.T.); +#56881 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56882,#56883),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56882 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56883 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#56884 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56885,#56886) + ,(#56887,#56888 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56885 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#56886 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#56887 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#56888 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#56889 = ADVANCED_FACE('',(#56890),#56907,.F.); +#56890 = FACE_BOUND('',#56891,.F.); +#56891 = EDGE_LOOP('',(#56892,#56893,#56900,#56906)); +#56892 = ORIENTED_EDGE('',*,*,#56319,.T.); +#56893 = ORIENTED_EDGE('',*,*,#56894,.T.); +#56894 = EDGE_CURVE('',#56312,#56895,#56897,.T.); +#56895 = VERTEX_POINT('',#56896); +#56896 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#56897 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56898,#56899),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56898 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#56899 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#56900 = ORIENTED_EDGE('',*,*,#56901,.F.); +#56901 = EDGE_CURVE('',#56866,#56895,#56902,.T.); +#56902 = LINE('',#56903,#56904); +#56903 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#56904 = VECTOR('',#56905,1.); +#56905 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#56906 = ORIENTED_EDGE('',*,*,#56865,.F.); +#56907 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56908,#56909) + ,(#56910,#56911 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#56908 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#56909 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#56910 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#56911 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#56912 = ADVANCED_FACE('',(#56913),#56930,.F.); +#56913 = FACE_BOUND('',#56914,.F.); +#56914 = EDGE_LOOP('',(#56915,#56916,#56923,#56929)); +#56915 = ORIENTED_EDGE('',*,*,#56311,.T.); +#56916 = ORIENTED_EDGE('',*,*,#56917,.T.); +#56917 = EDGE_CURVE('',#56304,#56918,#56920,.T.); +#56918 = VERTEX_POINT('',#56919); +#56919 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#56920 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56921,#56922),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56921 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#56922 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#56923 = ORIENTED_EDGE('',*,*,#56924,.F.); +#56924 = EDGE_CURVE('',#56895,#56918,#56925,.T.); +#56925 = LINE('',#56926,#56927); +#56926 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#56927 = VECTOR('',#56928,1.); +#56928 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#56929 = ORIENTED_EDGE('',*,*,#56894,.F.); +#56930 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56931,#56932) + ,(#56933,#56934 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#56931 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#56932 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#56933 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#56934 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#56935 = ADVANCED_FACE('',(#56936),#56953,.F.); +#56936 = FACE_BOUND('',#56937,.F.); +#56937 = EDGE_LOOP('',(#56938,#56939,#56946,#56952)); +#56938 = ORIENTED_EDGE('',*,*,#56303,.T.); +#56939 = ORIENTED_EDGE('',*,*,#56940,.T.); +#56940 = EDGE_CURVE('',#56296,#56941,#56943,.T.); +#56941 = VERTEX_POINT('',#56942); +#56942 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#56943 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56944,#56945),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56944 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#56945 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#56946 = ORIENTED_EDGE('',*,*,#56947,.F.); +#56947 = EDGE_CURVE('',#56918,#56941,#56948,.T.); +#56948 = LINE('',#56949,#56950); +#56949 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#56950 = VECTOR('',#56951,1.); +#56951 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#56952 = ORIENTED_EDGE('',*,*,#56917,.F.); +#56953 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#56954,#56955) + ,(#56956,#56957 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#56954 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#56955 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#56956 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#56957 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#56958 = ADVANCED_FACE('',(#56959),#57008,.F.); +#56959 = FACE_BOUND('',#56960,.F.); +#56960 = EDGE_LOOP('',(#56961,#56962,#56970,#56978,#56986,#56994,#57001, + #57007)); +#56961 = ORIENTED_EDGE('',*,*,#56295,.T.); +#56962 = ORIENTED_EDGE('',*,*,#56963,.T.); +#56963 = EDGE_CURVE('',#56288,#56964,#56966,.T.); +#56964 = VERTEX_POINT('',#56965); +#56965 = CARTESIAN_POINT('',(0.775,0.7,0.9)); +#56966 = LINE('',#56967,#56968); +#56967 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#56968 = VECTOR('',#56969,1.); +#56969 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56970 = ORIENTED_EDGE('',*,*,#56971,.T.); +#56971 = EDGE_CURVE('',#56964,#56972,#56974,.T.); +#56972 = VERTEX_POINT('',#56973); +#56973 = CARTESIAN_POINT('',(0.775,-0.7,0.9)); +#56974 = LINE('',#56975,#56976); +#56975 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#56976 = VECTOR('',#56977,1.); +#56977 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56978 = ORIENTED_EDGE('',*,*,#56979,.T.); +#56979 = EDGE_CURVE('',#56972,#56980,#56982,.T.); +#56980 = VERTEX_POINT('',#56981); +#56981 = CARTESIAN_POINT('',(0.775,-1.2,0.9)); +#56982 = LINE('',#56983,#56984); +#56983 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#56984 = VECTOR('',#56985,1.); +#56985 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56986 = ORIENTED_EDGE('',*,*,#56987,.T.); +#56987 = EDGE_CURVE('',#56980,#56988,#56990,.T.); +#56988 = VERTEX_POINT('',#56989); +#56989 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#56990 = LINE('',#56991,#56992); +#56991 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#56992 = VECTOR('',#56993,1.); +#56993 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#56994 = ORIENTED_EDGE('',*,*,#56995,.T.); +#56995 = EDGE_CURVE('',#56988,#56996,#56998,.T.); +#56996 = VERTEX_POINT('',#56997); +#56997 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#56998 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#56999,#57000),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#56999 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#57000 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#57001 = ORIENTED_EDGE('',*,*,#57002,.F.); +#57002 = EDGE_CURVE('',#56941,#56996,#57003,.T.); +#57003 = LINE('',#57004,#57005); +#57004 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#57005 = VECTOR('',#57006,1.); +#57006 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57007 = ORIENTED_EDGE('',*,*,#56940,.F.); +#57008 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#57009,#57010) + ,(#57011,#57012 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#57009 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#57010 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#57011 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#57012 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#57013 = ADVANCED_FACE('',(#57014),#57046,.F.); +#57014 = FACE_BOUND('',#57015,.F.); +#57015 = EDGE_LOOP('',(#57016,#57024,#57032,#57038,#57044,#57045)); +#57016 = ORIENTED_EDGE('',*,*,#57017,.F.); +#57017 = EDGE_CURVE('',#57018,#56280,#57020,.T.); +#57018 = VERTEX_POINT('',#57019); +#57019 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#57020 = LINE('',#57021,#57022); +#57021 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#57022 = VECTOR('',#57023,1.); +#57023 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57024 = ORIENTED_EDGE('',*,*,#57025,.T.); +#57025 = EDGE_CURVE('',#57018,#57026,#57028,.T.); +#57026 = VERTEX_POINT('',#57027); +#57027 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#57028 = LINE('',#57029,#57030); +#57029 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#57030 = VECTOR('',#57031,1.); +#57031 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57032 = ORIENTED_EDGE('',*,*,#57033,.T.); +#57033 = EDGE_CURVE('',#57026,#56624,#57034,.T.); +#57034 = LINE('',#57035,#57036); +#57035 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#57036 = VECTOR('',#57037,1.); +#57037 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57038 = ORIENTED_EDGE('',*,*,#57039,.T.); +#57039 = EDGE_CURVE('',#56624,#56964,#57040,.T.); +#57040 = LINE('',#57041,#57042); +#57041 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#57042 = VECTOR('',#57043,1.); +#57043 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57044 = ORIENTED_EDGE('',*,*,#56963,.F.); +#57045 = ORIENTED_EDGE('',*,*,#56287,.F.); +#57046 = PLANE('',#57047); +#57047 = AXIS2_PLACEMENT_3D('',#57048,#57049,#57050); +#57048 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#57049 = DIRECTION('',(0.,0.,-1.)); +#57050 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#57051 = ADVANCED_FACE('',(#57052),#57095,.F.); +#57052 = FACE_BOUND('',#57053,.F.); +#57053 = EDGE_LOOP('',(#57054,#57060,#57061,#57062,#57063,#57064,#57065, + #57071,#57072,#57080,#57088,#57094)); +#57054 = ORIENTED_EDGE('',*,*,#57055,.F.); +#57055 = EDGE_CURVE('',#56686,#56980,#57056,.T.); +#57056 = LINE('',#57057,#57058); +#57057 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#57058 = VECTOR('',#57059,1.); +#57059 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57060 = ORIENTED_EDGE('',*,*,#56701,.T.); +#57061 = ORIENTED_EDGE('',*,*,#56746,.T.); +#57062 = ORIENTED_EDGE('',*,*,#56763,.T.); +#57063 = ORIENTED_EDGE('',*,*,#56717,.T.); +#57064 = ORIENTED_EDGE('',*,*,#56389,.T.); +#57065 = ORIENTED_EDGE('',*,*,#57066,.T.); +#57066 = EDGE_CURVE('',#56382,#56826,#57067,.T.); +#57067 = LINE('',#57068,#57069); +#57068 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#57069 = VECTOR('',#57070,1.); +#57070 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57071 = ORIENTED_EDGE('',*,*,#56823,.F.); +#57072 = ORIENTED_EDGE('',*,*,#57073,.F.); +#57073 = EDGE_CURVE('',#57074,#56824,#57076,.T.); +#57074 = VERTEX_POINT('',#57075); +#57075 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#57076 = LINE('',#57077,#57078); +#57077 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#57078 = VECTOR('',#57079,1.); +#57079 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#57080 = ORIENTED_EDGE('',*,*,#57081,.F.); +#57081 = EDGE_CURVE('',#57082,#57074,#57084,.T.); +#57082 = VERTEX_POINT('',#57083); +#57083 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#57084 = LINE('',#57085,#57086); +#57085 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#57086 = VECTOR('',#57087,1.); +#57087 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57088 = ORIENTED_EDGE('',*,*,#57089,.F.); +#57089 = EDGE_CURVE('',#56988,#57082,#57090,.T.); +#57090 = LINE('',#57091,#57092); +#57091 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#57092 = VECTOR('',#57093,1.); +#57093 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#57094 = ORIENTED_EDGE('',*,*,#56987,.F.); +#57095 = PLANE('',#57096); +#57096 = AXIS2_PLACEMENT_3D('',#57097,#57098,#57099); +#57097 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#57098 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#57099 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#57100 = ADVANCED_FACE('',(#57101),#57187,.F.); +#57101 = FACE_BOUND('',#57102,.F.); +#57102 = EDGE_LOOP('',(#57103,#57104,#57105,#57114,#57122,#57131,#57139, + #57147,#57155,#57164,#57172,#57181)); +#57103 = ORIENTED_EDGE('',*,*,#56381,.F.); +#57104 = ORIENTED_EDGE('',*,*,#56403,.T.); +#57105 = ORIENTED_EDGE('',*,*,#57106,.T.); +#57106 = EDGE_CURVE('',#56404,#57107,#57109,.T.); +#57107 = VERTEX_POINT('',#57108); +#57108 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#57109 = CIRCLE('',#57110,0.1); +#57110 = AXIS2_PLACEMENT_3D('',#57111,#57112,#57113); +#57111 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#57112 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57113 = DIRECTION('',(0.,0.,1.)); +#57114 = ORIENTED_EDGE('',*,*,#57115,.T.); +#57115 = EDGE_CURVE('',#57107,#57116,#57118,.T.); +#57116 = VERTEX_POINT('',#57117); +#57117 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583)); +#57118 = LINE('',#57119,#57120); +#57119 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#57120 = VECTOR('',#57121,1.); +#57121 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#57122 = ORIENTED_EDGE('',*,*,#57123,.T.); +#57123 = EDGE_CURVE('',#57116,#57124,#57126,.T.); +#57124 = VERTEX_POINT('',#57125); +#57125 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#57126 = CIRCLE('',#57127,0.25); +#57127 = AXIS2_PLACEMENT_3D('',#57128,#57129,#57130); +#57128 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#57129 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#57130 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#57131 = ORIENTED_EDGE('',*,*,#57132,.T.); +#57132 = EDGE_CURVE('',#57124,#57133,#57135,.T.); +#57133 = VERTEX_POINT('',#57134); +#57134 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#57135 = LINE('',#57136,#57137); +#57136 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#57137 = VECTOR('',#57138,1.); +#57138 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57139 = ORIENTED_EDGE('',*,*,#57140,.T.); +#57140 = EDGE_CURVE('',#57133,#57141,#57143,.T.); +#57141 = VERTEX_POINT('',#57142); +#57142 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#57143 = LINE('',#57144,#57145); +#57144 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#57145 = VECTOR('',#57146,1.); +#57146 = DIRECTION('',(0.,0.,1.)); +#57147 = ORIENTED_EDGE('',*,*,#57148,.T.); +#57148 = EDGE_CURVE('',#57141,#57149,#57151,.T.); +#57149 = VERTEX_POINT('',#57150); +#57150 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15)); +#57151 = LINE('',#57152,#57153); +#57152 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#57153 = VECTOR('',#57154,1.); +#57154 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57155 = ORIENTED_EDGE('',*,*,#57156,.T.); +#57156 = EDGE_CURVE('',#57149,#57157,#57159,.T.); +#57157 = VERTEX_POINT('',#57158); +#57158 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#57159 = CIRCLE('',#57160,0.1); +#57160 = AXIS2_PLACEMENT_3D('',#57161,#57162,#57163); +#57161 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#57162 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57163 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#57164 = ORIENTED_EDGE('',*,*,#57165,.T.); +#57165 = EDGE_CURVE('',#57157,#57166,#57168,.T.); +#57166 = VERTEX_POINT('',#57167); +#57167 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417)); +#57168 = LINE('',#57169,#57170); +#57169 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#57170 = VECTOR('',#57171,1.); +#57171 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#57172 = ORIENTED_EDGE('',*,*,#57173,.T.); +#57173 = EDGE_CURVE('',#57166,#57174,#57176,.T.); +#57174 = VERTEX_POINT('',#57175); +#57175 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#57176 = CIRCLE('',#57177,0.25); +#57177 = AXIS2_PLACEMENT_3D('',#57178,#57179,#57180); +#57178 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#57179 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#57180 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#57181 = ORIENTED_EDGE('',*,*,#57182,.T.); +#57182 = EDGE_CURVE('',#57174,#56382,#57183,.T.); +#57183 = LINE('',#57184,#57185); +#57184 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#57185 = VECTOR('',#57186,1.); +#57186 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57187 = PLANE('',#57188); +#57188 = AXIS2_PLACEMENT_3D('',#57189,#57190,#57191); +#57189 = CARTESIAN_POINT('',(-1.069123385139,-1.2,0.441695635315)); +#57190 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57191 = DIRECTION('',(0.,-0.,1.)); +#57192 = ADVANCED_FACE('',(#57193),#57212,.F.); +#57193 = FACE_BOUND('',#57194,.F.); +#57194 = EDGE_LOOP('',(#57195,#57196,#57205,#57211)); +#57195 = ORIENTED_EDGE('',*,*,#56420,.T.); +#57196 = ORIENTED_EDGE('',*,*,#57197,.T.); +#57197 = EDGE_CURVE('',#56413,#57198,#57200,.T.); +#57198 = VERTEX_POINT('',#57199); +#57199 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767)); +#57200 = CIRCLE('',#57201,0.1); +#57201 = AXIS2_PLACEMENT_3D('',#57202,#57203,#57204); +#57202 = CARTESIAN_POINT('',(-0.85,-0.7,0.65)); +#57203 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57204 = DIRECTION('',(0.,0.,1.)); +#57205 = ORIENTED_EDGE('',*,*,#57206,.F.); +#57206 = EDGE_CURVE('',#57107,#57198,#57207,.T.); +#57207 = LINE('',#57208,#57209); +#57208 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#57209 = VECTOR('',#57210,1.); +#57210 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57211 = ORIENTED_EDGE('',*,*,#57106,.F.); +#57212 = CYLINDRICAL_SURFACE('',#57213,0.1); +#57213 = AXIS2_PLACEMENT_3D('',#57214,#57215,#57216); +#57214 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#57215 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57216 = DIRECTION('',(0.,0.,1.)); +#57217 = ADVANCED_FACE('',(#57218),#57296,.T.); +#57218 = FACE_BOUND('',#57219,.T.); +#57219 = EDGE_LOOP('',(#57220,#57221,#57222,#57223,#57231,#57240,#57248, + #57256,#57264,#57273,#57281,#57290)); +#57220 = ORIENTED_EDGE('',*,*,#56434,.F.); +#57221 = ORIENTED_EDGE('',*,*,#56412,.T.); +#57222 = ORIENTED_EDGE('',*,*,#57197,.T.); +#57223 = ORIENTED_EDGE('',*,*,#57224,.T.); +#57224 = EDGE_CURVE('',#57198,#57225,#57227,.T.); +#57225 = VERTEX_POINT('',#57226); +#57226 = CARTESIAN_POINT('',(-1.02432885403,-0.7,0.206587955583)); +#57227 = LINE('',#57228,#57229); +#57228 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767)); +#57229 = VECTOR('',#57230,1.); +#57230 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#57231 = ORIENTED_EDGE('',*,*,#57232,.T.); +#57232 = EDGE_CURVE('',#57225,#57233,#57235,.T.); +#57233 = VERTEX_POINT('',#57234); +#57234 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.)); +#57235 = CIRCLE('',#57236,0.25); +#57236 = AXIS2_PLACEMENT_3D('',#57237,#57238,#57239); +#57237 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25)); +#57238 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#57239 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#57240 = ORIENTED_EDGE('',*,*,#57241,.T.); +#57241 = EDGE_CURVE('',#57233,#57242,#57244,.T.); +#57242 = VERTEX_POINT('',#57243); +#57243 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#57244 = LINE('',#57245,#57246); +#57245 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.)); +#57246 = VECTOR('',#57247,1.); +#57247 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57248 = ORIENTED_EDGE('',*,*,#57249,.T.); +#57249 = EDGE_CURVE('',#57242,#57250,#57252,.T.); +#57250 = VERTEX_POINT('',#57251); +#57251 = CARTESIAN_POINT('',(-1.4,-0.7,0.15)); +#57252 = LINE('',#57253,#57254); +#57253 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#57254 = VECTOR('',#57255,1.); +#57255 = DIRECTION('',(0.,0.,1.)); +#57256 = ORIENTED_EDGE('',*,*,#57257,.T.); +#57257 = EDGE_CURVE('',#57250,#57258,#57260,.T.); +#57258 = VERTEX_POINT('',#57259); +#57259 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.15)); +#57260 = LINE('',#57261,#57262); +#57261 = CARTESIAN_POINT('',(-1.4,-0.7,0.15)); +#57262 = VECTOR('',#57263,1.); +#57263 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57264 = ORIENTED_EDGE('',*,*,#57265,.T.); +#57265 = EDGE_CURVE('',#57258,#57266,#57268,.T.); +#57266 = VERTEX_POINT('',#57267); +#57267 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233)); +#57268 = CIRCLE('',#57269,0.1); +#57269 = AXIS2_PLACEMENT_3D('',#57270,#57271,#57272); +#57270 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25)); +#57271 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57272 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#57273 = ORIENTED_EDGE('',*,*,#57274,.T.); +#57274 = EDGE_CURVE('',#57266,#57275,#57277,.T.); +#57275 = VERTEX_POINT('',#57276); +#57276 = CARTESIAN_POINT('',(-1.096201938253,-0.7,0.693412044417)); +#57277 = LINE('',#57278,#57279); +#57278 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233)); +#57279 = VECTOR('',#57280,1.); +#57280 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#57281 = ORIENTED_EDGE('',*,*,#57282,.T.); +#57282 = EDGE_CURVE('',#57275,#57283,#57285,.T.); +#57283 = VERTEX_POINT('',#57284); +#57284 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#57285 = CIRCLE('',#57286,0.25); +#57286 = AXIS2_PLACEMENT_3D('',#57287,#57288,#57289); +#57287 = CARTESIAN_POINT('',(-0.85,-0.7,0.65)); +#57288 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#57289 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#57290 = ORIENTED_EDGE('',*,*,#57291,.T.); +#57291 = EDGE_CURVE('',#57283,#56435,#57292,.T.); +#57292 = LINE('',#57293,#57294); +#57293 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#57294 = VECTOR('',#57295,1.); +#57295 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57296 = PLANE('',#57297); +#57297 = AXIS2_PLACEMENT_3D('',#57298,#57299,#57300); +#57298 = CARTESIAN_POINT('',(-1.069123385139,-0.7,0.441695635315)); +#57299 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57300 = DIRECTION('',(0.,-0.,1.)); +#57301 = ADVANCED_FACE('',(#57302),#57318,.F.); +#57302 = FACE_BOUND('',#57303,.F.); +#57303 = EDGE_LOOP('',(#57304,#57305,#57311,#57312)); +#57304 = ORIENTED_EDGE('',*,*,#56451,.T.); +#57305 = ORIENTED_EDGE('',*,*,#57306,.T.); +#57306 = EDGE_CURVE('',#56444,#56842,#57307,.T.); +#57307 = LINE('',#57308,#57309); +#57308 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#57309 = VECTOR('',#57310,1.); +#57310 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57311 = ORIENTED_EDGE('',*,*,#56841,.F.); +#57312 = ORIENTED_EDGE('',*,*,#57313,.F.); +#57313 = EDGE_CURVE('',#56435,#56834,#57314,.T.); +#57314 = LINE('',#57315,#57316); +#57315 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#57316 = VECTOR('',#57317,1.); +#57317 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57318 = PLANE('',#57319); +#57319 = AXIS2_PLACEMENT_3D('',#57320,#57321,#57322); +#57320 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#57321 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#57322 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#57323 = ADVANCED_FACE('',(#57324),#57410,.F.); +#57324 = FACE_BOUND('',#57325,.F.); +#57325 = EDGE_LOOP('',(#57326,#57327,#57328,#57337,#57345,#57354,#57362, + #57370,#57378,#57387,#57395,#57404)); +#57326 = ORIENTED_EDGE('',*,*,#56443,.F.); +#57327 = ORIENTED_EDGE('',*,*,#56465,.T.); +#57328 = ORIENTED_EDGE('',*,*,#57329,.T.); +#57329 = EDGE_CURVE('',#56466,#57330,#57332,.T.); +#57330 = VERTEX_POINT('',#57331); +#57331 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#57332 = CIRCLE('',#57333,0.1); +#57333 = AXIS2_PLACEMENT_3D('',#57334,#57335,#57336); +#57334 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#57335 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57336 = DIRECTION('',(0.,0.,1.)); +#57337 = ORIENTED_EDGE('',*,*,#57338,.T.); +#57338 = EDGE_CURVE('',#57330,#57339,#57341,.T.); +#57339 = VERTEX_POINT('',#57340); +#57340 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583)); +#57341 = LINE('',#57342,#57343); +#57342 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#57343 = VECTOR('',#57344,1.); +#57344 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#57345 = ORIENTED_EDGE('',*,*,#57346,.T.); +#57346 = EDGE_CURVE('',#57339,#57347,#57349,.T.); +#57347 = VERTEX_POINT('',#57348); +#57348 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#57349 = CIRCLE('',#57350,0.25); +#57350 = AXIS2_PLACEMENT_3D('',#57351,#57352,#57353); +#57351 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#57352 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#57353 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#57354 = ORIENTED_EDGE('',*,*,#57355,.T.); +#57355 = EDGE_CURVE('',#57347,#57356,#57358,.T.); +#57356 = VERTEX_POINT('',#57357); +#57357 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#57358 = LINE('',#57359,#57360); +#57359 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#57360 = VECTOR('',#57361,1.); +#57361 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57362 = ORIENTED_EDGE('',*,*,#57363,.T.); +#57363 = EDGE_CURVE('',#57356,#57364,#57366,.T.); +#57364 = VERTEX_POINT('',#57365); +#57365 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#57366 = LINE('',#57367,#57368); +#57367 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#57368 = VECTOR('',#57369,1.); +#57369 = DIRECTION('',(0.,0.,1.)); +#57370 = ORIENTED_EDGE('',*,*,#57371,.T.); +#57371 = EDGE_CURVE('',#57364,#57372,#57374,.T.); +#57372 = VERTEX_POINT('',#57373); +#57373 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15)); +#57374 = LINE('',#57375,#57376); +#57375 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#57376 = VECTOR('',#57377,1.); +#57377 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57378 = ORIENTED_EDGE('',*,*,#57379,.T.); +#57379 = EDGE_CURVE('',#57372,#57380,#57382,.T.); +#57380 = VERTEX_POINT('',#57381); +#57381 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#57382 = CIRCLE('',#57383,0.1); +#57383 = AXIS2_PLACEMENT_3D('',#57384,#57385,#57386); +#57384 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#57385 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57386 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#57387 = ORIENTED_EDGE('',*,*,#57388,.T.); +#57388 = EDGE_CURVE('',#57380,#57389,#57391,.T.); +#57389 = VERTEX_POINT('',#57390); +#57390 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417)); +#57391 = LINE('',#57392,#57393); +#57392 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#57393 = VECTOR('',#57394,1.); +#57394 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#57395 = ORIENTED_EDGE('',*,*,#57396,.T.); +#57396 = EDGE_CURVE('',#57389,#57397,#57399,.T.); +#57397 = VERTEX_POINT('',#57398); +#57398 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#57399 = CIRCLE('',#57400,0.25); +#57400 = AXIS2_PLACEMENT_3D('',#57401,#57402,#57403); +#57401 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#57402 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#57403 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#57404 = ORIENTED_EDGE('',*,*,#57405,.T.); +#57405 = EDGE_CURVE('',#57397,#56444,#57406,.T.); +#57406 = LINE('',#57407,#57408); +#57407 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#57408 = VECTOR('',#57409,1.); +#57409 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57410 = PLANE('',#57411); +#57411 = AXIS2_PLACEMENT_3D('',#57412,#57413,#57414); +#57412 = CARTESIAN_POINT('',(-1.069123385139,-0.25,0.441695635315)); +#57413 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57414 = DIRECTION('',(0.,-0.,1.)); +#57415 = ADVANCED_FACE('',(#57416),#57435,.F.); +#57416 = FACE_BOUND('',#57417,.F.); +#57417 = EDGE_LOOP('',(#57418,#57419,#57428,#57434)); +#57418 = ORIENTED_EDGE('',*,*,#56482,.T.); +#57419 = ORIENTED_EDGE('',*,*,#57420,.T.); +#57420 = EDGE_CURVE('',#56475,#57421,#57423,.T.); +#57421 = VERTEX_POINT('',#57422); +#57422 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767)); +#57423 = CIRCLE('',#57424,0.1); +#57424 = AXIS2_PLACEMENT_3D('',#57425,#57426,#57427); +#57425 = CARTESIAN_POINT('',(-0.85,0.25,0.65)); +#57426 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57427 = DIRECTION('',(0.,0.,1.)); +#57428 = ORIENTED_EDGE('',*,*,#57429,.F.); +#57429 = EDGE_CURVE('',#57330,#57421,#57430,.T.); +#57430 = LINE('',#57431,#57432); +#57431 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#57432 = VECTOR('',#57433,1.); +#57433 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57434 = ORIENTED_EDGE('',*,*,#57329,.F.); +#57435 = CYLINDRICAL_SURFACE('',#57436,0.1); +#57436 = AXIS2_PLACEMENT_3D('',#57437,#57438,#57439); +#57437 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#57438 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57439 = DIRECTION('',(0.,0.,1.)); +#57440 = ADVANCED_FACE('',(#57441),#57519,.T.); +#57441 = FACE_BOUND('',#57442,.T.); +#57442 = EDGE_LOOP('',(#57443,#57444,#57445,#57446,#57454,#57463,#57471, + #57479,#57487,#57496,#57504,#57513)); +#57443 = ORIENTED_EDGE('',*,*,#56496,.F.); +#57444 = ORIENTED_EDGE('',*,*,#56474,.T.); +#57445 = ORIENTED_EDGE('',*,*,#57420,.T.); +#57446 = ORIENTED_EDGE('',*,*,#57447,.T.); +#57447 = EDGE_CURVE('',#57421,#57448,#57450,.T.); +#57448 = VERTEX_POINT('',#57449); +#57449 = CARTESIAN_POINT('',(-1.02432885403,0.25,0.206587955583)); +#57450 = LINE('',#57451,#57452); +#57451 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767)); +#57452 = VECTOR('',#57453,1.); +#57453 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#57454 = ORIENTED_EDGE('',*,*,#57455,.T.); +#57455 = EDGE_CURVE('',#57448,#57456,#57458,.T.); +#57456 = VERTEX_POINT('',#57457); +#57457 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.)); +#57458 = CIRCLE('',#57459,0.25); +#57459 = AXIS2_PLACEMENT_3D('',#57460,#57461,#57462); +#57460 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25)); +#57461 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#57462 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#57463 = ORIENTED_EDGE('',*,*,#57464,.T.); +#57464 = EDGE_CURVE('',#57456,#57465,#57467,.T.); +#57465 = VERTEX_POINT('',#57466); +#57466 = CARTESIAN_POINT('',(-1.4,0.25,0.)); +#57467 = LINE('',#57468,#57469); +#57468 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.)); +#57469 = VECTOR('',#57470,1.); +#57470 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57471 = ORIENTED_EDGE('',*,*,#57472,.T.); +#57472 = EDGE_CURVE('',#57465,#57473,#57475,.T.); +#57473 = VERTEX_POINT('',#57474); +#57474 = CARTESIAN_POINT('',(-1.4,0.25,0.15)); +#57475 = LINE('',#57476,#57477); +#57476 = CARTESIAN_POINT('',(-1.4,0.25,0.)); +#57477 = VECTOR('',#57478,1.); +#57478 = DIRECTION('',(0.,0.,1.)); +#57479 = ORIENTED_EDGE('',*,*,#57480,.T.); +#57480 = EDGE_CURVE('',#57473,#57481,#57483,.T.); +#57481 = VERTEX_POINT('',#57482); +#57482 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.15)); +#57483 = LINE('',#57484,#57485); +#57484 = CARTESIAN_POINT('',(-1.4,0.25,0.15)); +#57485 = VECTOR('',#57486,1.); +#57486 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57487 = ORIENTED_EDGE('',*,*,#57488,.T.); +#57488 = EDGE_CURVE('',#57481,#57489,#57491,.T.); +#57489 = VERTEX_POINT('',#57490); +#57490 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233)); +#57491 = CIRCLE('',#57492,0.1); +#57492 = AXIS2_PLACEMENT_3D('',#57493,#57494,#57495); +#57493 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25)); +#57494 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57495 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#57496 = ORIENTED_EDGE('',*,*,#57497,.T.); +#57497 = EDGE_CURVE('',#57489,#57498,#57500,.T.); +#57498 = VERTEX_POINT('',#57499); +#57499 = CARTESIAN_POINT('',(-1.096201938253,0.25,0.693412044417)); +#57500 = LINE('',#57501,#57502); +#57501 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233)); +#57502 = VECTOR('',#57503,1.); +#57503 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#57504 = ORIENTED_EDGE('',*,*,#57505,.T.); +#57505 = EDGE_CURVE('',#57498,#57506,#57508,.T.); +#57506 = VERTEX_POINT('',#57507); +#57507 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#57508 = CIRCLE('',#57509,0.25); +#57509 = AXIS2_PLACEMENT_3D('',#57510,#57511,#57512); +#57510 = CARTESIAN_POINT('',(-0.85,0.25,0.65)); +#57511 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#57512 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#57513 = ORIENTED_EDGE('',*,*,#57514,.T.); +#57514 = EDGE_CURVE('',#57506,#56497,#57515,.T.); +#57515 = LINE('',#57516,#57517); +#57516 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#57517 = VECTOR('',#57518,1.); +#57518 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57519 = PLANE('',#57520); +#57520 = AXIS2_PLACEMENT_3D('',#57521,#57522,#57523); +#57521 = CARTESIAN_POINT('',(-1.069123385139,0.25,0.441695635315)); +#57522 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57523 = DIRECTION('',(0.,-0.,1.)); +#57524 = ADVANCED_FACE('',(#57525),#57536,.F.); +#57525 = FACE_BOUND('',#57526,.F.); +#57526 = EDGE_LOOP('',(#57527,#57528,#57529,#57530)); +#57527 = ORIENTED_EDGE('',*,*,#56513,.T.); +#57528 = ORIENTED_EDGE('',*,*,#56809,.T.); +#57529 = ORIENTED_EDGE('',*,*,#56857,.F.); +#57530 = ORIENTED_EDGE('',*,*,#57531,.F.); +#57531 = EDGE_CURVE('',#56497,#56850,#57532,.T.); +#57532 = LINE('',#57533,#57534); +#57533 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#57534 = VECTOR('',#57535,1.); +#57535 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57536 = PLANE('',#57537); +#57537 = AXIS2_PLACEMENT_3D('',#57538,#57539,#57540); +#57538 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#57539 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#57540 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#57541 = ADVANCED_FACE('',(#57542),#57621,.F.); +#57542 = FACE_BOUND('',#57543,.F.); +#57543 = EDGE_LOOP('',(#57544,#57545,#57546,#57555,#57563,#57572,#57580, + #57588,#57596,#57605,#57613,#57620)); +#57544 = ORIENTED_EDGE('',*,*,#56505,.F.); +#57545 = ORIENTED_EDGE('',*,*,#56527,.T.); +#57546 = ORIENTED_EDGE('',*,*,#57547,.T.); +#57547 = EDGE_CURVE('',#56528,#57548,#57550,.T.); +#57548 = VERTEX_POINT('',#57549); +#57549 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#57550 = CIRCLE('',#57551,0.1); +#57551 = AXIS2_PLACEMENT_3D('',#57552,#57553,#57554); +#57552 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#57553 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57554 = DIRECTION('',(0.,0.,1.)); +#57555 = ORIENTED_EDGE('',*,*,#57556,.T.); +#57556 = EDGE_CURVE('',#57548,#57557,#57559,.T.); +#57557 = VERTEX_POINT('',#57558); +#57558 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583)); +#57559 = LINE('',#57560,#57561); +#57560 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#57561 = VECTOR('',#57562,1.); +#57562 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#57563 = ORIENTED_EDGE('',*,*,#57564,.T.); +#57564 = EDGE_CURVE('',#57557,#57565,#57567,.T.); +#57565 = VERTEX_POINT('',#57566); +#57566 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#57567 = CIRCLE('',#57568,0.25); +#57568 = AXIS2_PLACEMENT_3D('',#57569,#57570,#57571); +#57569 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#57570 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#57571 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#57572 = ORIENTED_EDGE('',*,*,#57573,.T.); +#57573 = EDGE_CURVE('',#57565,#57574,#57576,.T.); +#57574 = VERTEX_POINT('',#57575); +#57575 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#57576 = LINE('',#57577,#57578); +#57577 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#57578 = VECTOR('',#57579,1.); +#57579 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57580 = ORIENTED_EDGE('',*,*,#57581,.T.); +#57581 = EDGE_CURVE('',#57574,#57582,#57584,.T.); +#57582 = VERTEX_POINT('',#57583); +#57583 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#57584 = LINE('',#57585,#57586); +#57585 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#57586 = VECTOR('',#57587,1.); +#57587 = DIRECTION('',(0.,0.,1.)); +#57588 = ORIENTED_EDGE('',*,*,#57589,.T.); +#57589 = EDGE_CURVE('',#57582,#57590,#57592,.T.); +#57590 = VERTEX_POINT('',#57591); +#57591 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15)); +#57592 = LINE('',#57593,#57594); +#57593 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#57594 = VECTOR('',#57595,1.); +#57595 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57596 = ORIENTED_EDGE('',*,*,#57597,.T.); +#57597 = EDGE_CURVE('',#57590,#57598,#57600,.T.); +#57598 = VERTEX_POINT('',#57599); +#57599 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#57600 = CIRCLE('',#57601,0.1); +#57601 = AXIS2_PLACEMENT_3D('',#57602,#57603,#57604); +#57602 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#57603 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57604 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#57605 = ORIENTED_EDGE('',*,*,#57606,.T.); +#57606 = EDGE_CURVE('',#57598,#57607,#57609,.T.); +#57607 = VERTEX_POINT('',#57608); +#57608 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417)); +#57609 = LINE('',#57610,#57611); +#57610 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#57611 = VECTOR('',#57612,1.); +#57612 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#57613 = ORIENTED_EDGE('',*,*,#57614,.T.); +#57614 = EDGE_CURVE('',#57607,#56779,#57615,.T.); +#57615 = CIRCLE('',#57616,0.25); +#57616 = AXIS2_PLACEMENT_3D('',#57617,#57618,#57619); +#57617 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#57618 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#57619 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#57620 = ORIENTED_EDGE('',*,*,#56778,.T.); +#57621 = PLANE('',#57622); +#57622 = AXIS2_PLACEMENT_3D('',#57623,#57624,#57625); +#57623 = CARTESIAN_POINT('',(-1.069123385139,0.7,0.441695635315)); +#57624 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57625 = DIRECTION('',(0.,-0.,1.)); +#57626 = ADVANCED_FACE('',(#57627),#57646,.F.); +#57627 = FACE_BOUND('',#57628,.F.); +#57628 = EDGE_LOOP('',(#57629,#57630,#57639,#57645)); +#57629 = ORIENTED_EDGE('',*,*,#56544,.T.); +#57630 = ORIENTED_EDGE('',*,*,#57631,.T.); +#57631 = EDGE_CURVE('',#56537,#57632,#57634,.T.); +#57632 = VERTEX_POINT('',#57633); +#57633 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767)); +#57634 = CIRCLE('',#57635,0.1); +#57635 = AXIS2_PLACEMENT_3D('',#57636,#57637,#57638); +#57636 = CARTESIAN_POINT('',(-0.85,1.2,0.65)); +#57637 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57638 = DIRECTION('',(0.,0.,1.)); +#57639 = ORIENTED_EDGE('',*,*,#57640,.F.); +#57640 = EDGE_CURVE('',#57548,#57632,#57641,.T.); +#57641 = LINE('',#57642,#57643); +#57642 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#57643 = VECTOR('',#57644,1.); +#57644 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57645 = ORIENTED_EDGE('',*,*,#57547,.F.); +#57646 = CYLINDRICAL_SURFACE('',#57647,0.1); +#57647 = AXIS2_PLACEMENT_3D('',#57648,#57649,#57650); +#57648 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#57649 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57650 = DIRECTION('',(0.,0.,1.)); +#57651 = ADVANCED_FACE('',(#57652),#57723,.T.); +#57652 = FACE_BOUND('',#57653,.T.); +#57653 = EDGE_LOOP('',(#57654,#57655,#57656,#57657,#57665,#57674,#57682, + #57690,#57698,#57707,#57715,#57722)); +#57654 = ORIENTED_EDGE('',*,*,#56558,.F.); +#57655 = ORIENTED_EDGE('',*,*,#56536,.T.); +#57656 = ORIENTED_EDGE('',*,*,#57631,.T.); +#57657 = ORIENTED_EDGE('',*,*,#57658,.T.); +#57658 = EDGE_CURVE('',#57632,#57659,#57661,.T.); +#57659 = VERTEX_POINT('',#57660); +#57660 = CARTESIAN_POINT('',(-1.02432885403,1.2,0.206587955583)); +#57661 = LINE('',#57662,#57663); +#57662 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767)); +#57663 = VECTOR('',#57664,1.); +#57664 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#57665 = ORIENTED_EDGE('',*,*,#57666,.T.); +#57666 = EDGE_CURVE('',#57659,#57667,#57669,.T.); +#57667 = VERTEX_POINT('',#57668); +#57668 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.)); +#57669 = CIRCLE('',#57670,0.25); +#57670 = AXIS2_PLACEMENT_3D('',#57671,#57672,#57673); +#57671 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25)); +#57672 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#57673 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#57674 = ORIENTED_EDGE('',*,*,#57675,.T.); +#57675 = EDGE_CURVE('',#57667,#57676,#57678,.T.); +#57676 = VERTEX_POINT('',#57677); +#57677 = CARTESIAN_POINT('',(-1.4,1.2,0.)); +#57678 = LINE('',#57679,#57680); +#57679 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.)); +#57680 = VECTOR('',#57681,1.); +#57681 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#57682 = ORIENTED_EDGE('',*,*,#57683,.T.); +#57683 = EDGE_CURVE('',#57676,#57684,#57686,.T.); +#57684 = VERTEX_POINT('',#57685); +#57685 = CARTESIAN_POINT('',(-1.4,1.2,0.15)); +#57686 = LINE('',#57687,#57688); +#57687 = CARTESIAN_POINT('',(-1.4,1.2,0.)); +#57688 = VECTOR('',#57689,1.); +#57689 = DIRECTION('',(0.,0.,1.)); +#57690 = ORIENTED_EDGE('',*,*,#57691,.T.); +#57691 = EDGE_CURVE('',#57684,#57692,#57694,.T.); +#57692 = VERTEX_POINT('',#57693); +#57693 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.15)); +#57694 = LINE('',#57695,#57696); +#57695 = CARTESIAN_POINT('',(-1.4,1.2,0.15)); +#57696 = VECTOR('',#57697,1.); +#57697 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#57698 = ORIENTED_EDGE('',*,*,#57699,.T.); +#57699 = EDGE_CURVE('',#57692,#57700,#57702,.T.); +#57700 = VERTEX_POINT('',#57701); +#57701 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233)); +#57702 = CIRCLE('',#57703,0.1); +#57703 = AXIS2_PLACEMENT_3D('',#57704,#57705,#57706); +#57704 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25)); +#57705 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#57706 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#57707 = ORIENTED_EDGE('',*,*,#57708,.T.); +#57708 = EDGE_CURVE('',#57700,#57709,#57711,.T.); +#57709 = VERTEX_POINT('',#57710); +#57710 = CARTESIAN_POINT('',(-1.096201938253,1.2,0.693412044417)); +#57711 = LINE('',#57712,#57713); +#57712 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233)); +#57713 = VECTOR('',#57714,1.); +#57714 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#57715 = ORIENTED_EDGE('',*,*,#57716,.T.); +#57716 = EDGE_CURVE('',#57709,#56787,#57717,.T.); +#57717 = CIRCLE('',#57718,0.25); +#57718 = AXIS2_PLACEMENT_3D('',#57719,#57720,#57721); +#57719 = CARTESIAN_POINT('',(-0.85,1.2,0.65)); +#57720 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#57721 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#57722 = ORIENTED_EDGE('',*,*,#56794,.T.); +#57723 = PLANE('',#57724); +#57724 = AXIS2_PLACEMENT_3D('',#57725,#57726,#57727); +#57725 = CARTESIAN_POINT('',(-1.069123385139,1.2,0.441695635315)); +#57726 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#57727 = DIRECTION('',(0.,-0.,1.)); +#57728 = ADVANCED_FACE('',(#57729),#57808,.F.); +#57729 = FACE_BOUND('',#57730,.F.); +#57730 = EDGE_LOOP('',(#57731,#57732,#57733,#57742,#57750,#57759,#57767, + #57775,#57783,#57792,#57800,#57807)); +#57731 = ORIENTED_EDGE('',*,*,#56577,.F.); +#57732 = ORIENTED_EDGE('',*,*,#56592,.T.); +#57733 = ORIENTED_EDGE('',*,*,#57734,.T.); +#57734 = EDGE_CURVE('',#56593,#57735,#57737,.T.); +#57735 = VERTEX_POINT('',#57736); +#57736 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#57737 = CIRCLE('',#57738,0.1); +#57738 = AXIS2_PLACEMENT_3D('',#57739,#57740,#57741); +#57739 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#57740 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57741 = DIRECTION('',(0.,0.,1.)); +#57742 = ORIENTED_EDGE('',*,*,#57743,.T.); +#57743 = EDGE_CURVE('',#57735,#57744,#57746,.T.); +#57744 = VERTEX_POINT('',#57745); +#57745 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583)); +#57746 = LINE('',#57747,#57748); +#57747 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#57748 = VECTOR('',#57749,1.); +#57749 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#57750 = ORIENTED_EDGE('',*,*,#57751,.T.); +#57751 = EDGE_CURVE('',#57744,#57752,#57754,.T.); +#57752 = VERTEX_POINT('',#57753); +#57753 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#57754 = CIRCLE('',#57755,0.25); +#57755 = AXIS2_PLACEMENT_3D('',#57756,#57757,#57758); +#57756 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#57757 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57758 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#57759 = ORIENTED_EDGE('',*,*,#57760,.T.); +#57760 = EDGE_CURVE('',#57752,#57761,#57763,.T.); +#57761 = VERTEX_POINT('',#57762); +#57762 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#57763 = LINE('',#57764,#57765); +#57764 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#57765 = VECTOR('',#57766,1.); +#57766 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57767 = ORIENTED_EDGE('',*,*,#57768,.T.); +#57768 = EDGE_CURVE('',#57761,#57769,#57771,.T.); +#57769 = VERTEX_POINT('',#57770); +#57770 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#57771 = LINE('',#57772,#57773); +#57772 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#57773 = VECTOR('',#57774,1.); +#57774 = DIRECTION('',(0.,0.,1.)); +#57775 = ORIENTED_EDGE('',*,*,#57776,.T.); +#57776 = EDGE_CURVE('',#57769,#57777,#57779,.T.); +#57777 = VERTEX_POINT('',#57778); +#57778 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15)); +#57779 = LINE('',#57780,#57781); +#57780 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#57781 = VECTOR('',#57782,1.); +#57782 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57783 = ORIENTED_EDGE('',*,*,#57784,.T.); +#57784 = EDGE_CURVE('',#57777,#57785,#57787,.T.); +#57785 = VERTEX_POINT('',#57786); +#57786 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#57787 = CIRCLE('',#57788,0.1); +#57788 = AXIS2_PLACEMENT_3D('',#57789,#57790,#57791); +#57789 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#57790 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57791 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#57792 = ORIENTED_EDGE('',*,*,#57793,.T.); +#57793 = EDGE_CURVE('',#57785,#57794,#57796,.T.); +#57794 = VERTEX_POINT('',#57795); +#57795 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417)); +#57796 = LINE('',#57797,#57798); +#57797 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#57798 = VECTOR('',#57799,1.); +#57799 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#57800 = ORIENTED_EDGE('',*,*,#57801,.T.); +#57801 = EDGE_CURVE('',#57794,#57018,#57802,.T.); +#57802 = CIRCLE('',#57803,0.25); +#57803 = AXIS2_PLACEMENT_3D('',#57804,#57805,#57806); +#57804 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#57805 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57806 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#57807 = ORIENTED_EDGE('',*,*,#57017,.T.); +#57808 = PLANE('',#57809); +#57809 = AXIS2_PLACEMENT_3D('',#57810,#57811,#57812); +#57810 = CARTESIAN_POINT('',(1.069123385139,1.2,0.441695635315)); +#57811 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57812 = DIRECTION('',(0.,0.,1.)); +#57813 = ADVANCED_FACE('',(#57814),#57833,.F.); +#57814 = FACE_BOUND('',#57815,.F.); +#57815 = EDGE_LOOP('',(#57816,#57817,#57826,#57832)); +#57816 = ORIENTED_EDGE('',*,*,#56609,.T.); +#57817 = ORIENTED_EDGE('',*,*,#57818,.T.); +#57818 = EDGE_CURVE('',#56602,#57819,#57821,.T.); +#57819 = VERTEX_POINT('',#57820); +#57820 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767)); +#57821 = CIRCLE('',#57822,0.1); +#57822 = AXIS2_PLACEMENT_3D('',#57823,#57824,#57825); +#57823 = CARTESIAN_POINT('',(0.85,0.7,0.65)); +#57824 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57825 = DIRECTION('',(0.,0.,1.)); +#57826 = ORIENTED_EDGE('',*,*,#57827,.F.); +#57827 = EDGE_CURVE('',#57735,#57819,#57828,.T.); +#57828 = LINE('',#57829,#57830); +#57829 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#57830 = VECTOR('',#57831,1.); +#57831 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57832 = ORIENTED_EDGE('',*,*,#57734,.F.); +#57833 = CYLINDRICAL_SURFACE('',#57834,0.1); +#57834 = AXIS2_PLACEMENT_3D('',#57835,#57836,#57837); +#57835 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#57836 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57837 = DIRECTION('',(0.,0.,1.)); +#57838 = ADVANCED_FACE('',(#57839),#57910,.T.); +#57839 = FACE_BOUND('',#57840,.T.); +#57840 = EDGE_LOOP('',(#57841,#57842,#57843,#57844,#57852,#57861,#57869, + #57877,#57885,#57894,#57902,#57909)); +#57841 = ORIENTED_EDGE('',*,*,#56623,.F.); +#57842 = ORIENTED_EDGE('',*,*,#56601,.T.); +#57843 = ORIENTED_EDGE('',*,*,#57818,.T.); +#57844 = ORIENTED_EDGE('',*,*,#57845,.T.); +#57845 = EDGE_CURVE('',#57819,#57846,#57848,.T.); +#57846 = VERTEX_POINT('',#57847); +#57847 = CARTESIAN_POINT('',(1.02432885403,0.7,0.206587955583)); +#57848 = LINE('',#57849,#57850); +#57849 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767)); +#57850 = VECTOR('',#57851,1.); +#57851 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#57852 = ORIENTED_EDGE('',*,*,#57853,.T.); +#57853 = EDGE_CURVE('',#57846,#57854,#57856,.T.); +#57854 = VERTEX_POINT('',#57855); +#57855 = CARTESIAN_POINT('',(1.270530792283,0.7,0.)); +#57856 = CIRCLE('',#57857,0.25); +#57857 = AXIS2_PLACEMENT_3D('',#57858,#57859,#57860); +#57858 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25)); +#57859 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57860 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#57861 = ORIENTED_EDGE('',*,*,#57862,.T.); +#57862 = EDGE_CURVE('',#57854,#57863,#57865,.T.); +#57863 = VERTEX_POINT('',#57864); +#57864 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#57865 = LINE('',#57866,#57867); +#57866 = CARTESIAN_POINT('',(1.270530792283,0.7,0.)); +#57867 = VECTOR('',#57868,1.); +#57868 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57869 = ORIENTED_EDGE('',*,*,#57870,.T.); +#57870 = EDGE_CURVE('',#57863,#57871,#57873,.T.); +#57871 = VERTEX_POINT('',#57872); +#57872 = CARTESIAN_POINT('',(1.4,0.7,0.15)); +#57873 = LINE('',#57874,#57875); +#57874 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#57875 = VECTOR('',#57876,1.); +#57876 = DIRECTION('',(0.,0.,1.)); +#57877 = ORIENTED_EDGE('',*,*,#57878,.T.); +#57878 = EDGE_CURVE('',#57871,#57879,#57881,.T.); +#57879 = VERTEX_POINT('',#57880); +#57880 = CARTESIAN_POINT('',(1.270530792283,0.7,0.15)); +#57881 = LINE('',#57882,#57883); +#57882 = CARTESIAN_POINT('',(1.4,0.7,0.15)); +#57883 = VECTOR('',#57884,1.); +#57884 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57885 = ORIENTED_EDGE('',*,*,#57886,.T.); +#57886 = EDGE_CURVE('',#57879,#57887,#57889,.T.); +#57887 = VERTEX_POINT('',#57888); +#57888 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233)); +#57889 = CIRCLE('',#57890,0.1); +#57890 = AXIS2_PLACEMENT_3D('',#57891,#57892,#57893); +#57891 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25)); +#57892 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57893 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#57894 = ORIENTED_EDGE('',*,*,#57895,.T.); +#57895 = EDGE_CURVE('',#57887,#57896,#57898,.T.); +#57896 = VERTEX_POINT('',#57897); +#57897 = CARTESIAN_POINT('',(1.096201938253,0.7,0.693412044417)); +#57898 = LINE('',#57899,#57900); +#57899 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233)); +#57900 = VECTOR('',#57901,1.); +#57901 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#57902 = ORIENTED_EDGE('',*,*,#57903,.T.); +#57903 = EDGE_CURVE('',#57896,#57026,#57904,.T.); +#57904 = CIRCLE('',#57905,0.25); +#57905 = AXIS2_PLACEMENT_3D('',#57906,#57907,#57908); +#57906 = CARTESIAN_POINT('',(0.85,0.7,0.65)); +#57907 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57908 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#57909 = ORIENTED_EDGE('',*,*,#57033,.T.); +#57910 = PLANE('',#57911); +#57911 = AXIS2_PLACEMENT_3D('',#57912,#57913,#57914); +#57912 = CARTESIAN_POINT('',(1.069123385139,0.7,0.441695635315)); +#57913 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57914 = DIRECTION('',(0.,0.,1.)); +#57915 = ADVANCED_FACE('',(#57916),#57927,.F.); +#57916 = FACE_BOUND('',#57917,.F.); +#57917 = EDGE_LOOP('',(#57918,#57919,#57920,#57926)); +#57918 = ORIENTED_EDGE('',*,*,#57039,.F.); +#57919 = ORIENTED_EDGE('',*,*,#56640,.T.); +#57920 = ORIENTED_EDGE('',*,*,#57921,.T.); +#57921 = EDGE_CURVE('',#56633,#56972,#57922,.T.); +#57922 = LINE('',#57923,#57924); +#57923 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#57924 = VECTOR('',#57925,1.); +#57925 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57926 = ORIENTED_EDGE('',*,*,#56971,.F.); +#57927 = PLANE('',#57928); +#57928 = AXIS2_PLACEMENT_3D('',#57929,#57930,#57931); +#57929 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#57930 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#57931 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#57932 = ADVANCED_FACE('',(#57933),#58019,.F.); +#57933 = FACE_BOUND('',#57934,.F.); +#57934 = EDGE_LOOP('',(#57935,#57936,#57937,#57946,#57954,#57963,#57971, + #57979,#57987,#57996,#58004,#58013)); +#57935 = ORIENTED_EDGE('',*,*,#56632,.F.); +#57936 = ORIENTED_EDGE('',*,*,#56654,.T.); +#57937 = ORIENTED_EDGE('',*,*,#57938,.T.); +#57938 = EDGE_CURVE('',#56655,#57939,#57941,.T.); +#57939 = VERTEX_POINT('',#57940); +#57940 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#57941 = CIRCLE('',#57942,0.1); +#57942 = AXIS2_PLACEMENT_3D('',#57943,#57944,#57945); +#57943 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#57944 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57945 = DIRECTION('',(0.,0.,1.)); +#57946 = ORIENTED_EDGE('',*,*,#57947,.T.); +#57947 = EDGE_CURVE('',#57939,#57948,#57950,.T.); +#57948 = VERTEX_POINT('',#57949); +#57949 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583)); +#57950 = LINE('',#57951,#57952); +#57951 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#57952 = VECTOR('',#57953,1.); +#57953 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#57954 = ORIENTED_EDGE('',*,*,#57955,.T.); +#57955 = EDGE_CURVE('',#57948,#57956,#57958,.T.); +#57956 = VERTEX_POINT('',#57957); +#57957 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#57958 = CIRCLE('',#57959,0.25); +#57959 = AXIS2_PLACEMENT_3D('',#57960,#57961,#57962); +#57960 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#57961 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#57962 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#57963 = ORIENTED_EDGE('',*,*,#57964,.T.); +#57964 = EDGE_CURVE('',#57956,#57965,#57967,.T.); +#57965 = VERTEX_POINT('',#57966); +#57966 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#57967 = LINE('',#57968,#57969); +#57968 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#57969 = VECTOR('',#57970,1.); +#57970 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#57971 = ORIENTED_EDGE('',*,*,#57972,.T.); +#57972 = EDGE_CURVE('',#57965,#57973,#57975,.T.); +#57973 = VERTEX_POINT('',#57974); +#57974 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#57975 = LINE('',#57976,#57977); +#57976 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#57977 = VECTOR('',#57978,1.); +#57978 = DIRECTION('',(0.,0.,1.)); +#57979 = ORIENTED_EDGE('',*,*,#57980,.T.); +#57980 = EDGE_CURVE('',#57973,#57981,#57983,.T.); +#57981 = VERTEX_POINT('',#57982); +#57982 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15)); +#57983 = LINE('',#57984,#57985); +#57984 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#57985 = VECTOR('',#57986,1.); +#57986 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#57987 = ORIENTED_EDGE('',*,*,#57988,.T.); +#57988 = EDGE_CURVE('',#57981,#57989,#57991,.T.); +#57989 = VERTEX_POINT('',#57990); +#57990 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#57991 = CIRCLE('',#57992,0.1); +#57992 = AXIS2_PLACEMENT_3D('',#57993,#57994,#57995); +#57993 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#57994 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#57995 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#57996 = ORIENTED_EDGE('',*,*,#57997,.T.); +#57997 = EDGE_CURVE('',#57989,#57998,#58000,.T.); +#57998 = VERTEX_POINT('',#57999); +#57999 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417)); +#58000 = LINE('',#58001,#58002); +#58001 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#58002 = VECTOR('',#58003,1.); +#58003 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#58004 = ORIENTED_EDGE('',*,*,#58005,.T.); +#58005 = EDGE_CURVE('',#57998,#58006,#58008,.T.); +#58006 = VERTEX_POINT('',#58007); +#58007 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#58008 = CIRCLE('',#58009,0.25); +#58009 = AXIS2_PLACEMENT_3D('',#58010,#58011,#58012); +#58010 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#58011 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58012 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#58013 = ORIENTED_EDGE('',*,*,#58014,.T.); +#58014 = EDGE_CURVE('',#58006,#56633,#58015,.T.); +#58015 = LINE('',#58016,#58017); +#58016 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#58017 = VECTOR('',#58018,1.); +#58018 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#58019 = PLANE('',#58020); +#58020 = AXIS2_PLACEMENT_3D('',#58021,#58022,#58023); +#58021 = CARTESIAN_POINT('',(1.069123385139,-0.7,0.441695635315)); +#58022 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58023 = DIRECTION('',(0.,0.,1.)); +#58024 = ADVANCED_FACE('',(#58025),#58044,.F.); +#58025 = FACE_BOUND('',#58026,.F.); +#58026 = EDGE_LOOP('',(#58027,#58028,#58037,#58043)); +#58027 = ORIENTED_EDGE('',*,*,#56671,.T.); +#58028 = ORIENTED_EDGE('',*,*,#58029,.T.); +#58029 = EDGE_CURVE('',#56664,#58030,#58032,.T.); +#58030 = VERTEX_POINT('',#58031); +#58031 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767)); +#58032 = CIRCLE('',#58033,0.1); +#58033 = AXIS2_PLACEMENT_3D('',#58034,#58035,#58036); +#58034 = CARTESIAN_POINT('',(0.85,-1.2,0.65)); +#58035 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58036 = DIRECTION('',(0.,0.,1.)); +#58037 = ORIENTED_EDGE('',*,*,#58038,.F.); +#58038 = EDGE_CURVE('',#57939,#58030,#58039,.T.); +#58039 = LINE('',#58040,#58041); +#58040 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#58041 = VECTOR('',#58042,1.); +#58042 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58043 = ORIENTED_EDGE('',*,*,#57938,.F.); +#58044 = CYLINDRICAL_SURFACE('',#58045,0.1); +#58045 = AXIS2_PLACEMENT_3D('',#58046,#58047,#58048); +#58046 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#58047 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58048 = DIRECTION('',(0.,0.,1.)); +#58049 = ADVANCED_FACE('',(#58050),#58128,.T.); +#58050 = FACE_BOUND('',#58051,.T.); +#58051 = EDGE_LOOP('',(#58052,#58053,#58054,#58055,#58063,#58072,#58080, + #58088,#58096,#58105,#58113,#58122)); +#58052 = ORIENTED_EDGE('',*,*,#56685,.F.); +#58053 = ORIENTED_EDGE('',*,*,#56663,.T.); +#58054 = ORIENTED_EDGE('',*,*,#58029,.T.); +#58055 = ORIENTED_EDGE('',*,*,#58056,.T.); +#58056 = EDGE_CURVE('',#58030,#58057,#58059,.T.); +#58057 = VERTEX_POINT('',#58058); +#58058 = CARTESIAN_POINT('',(1.02432885403,-1.2,0.206587955583)); +#58059 = LINE('',#58060,#58061); +#58060 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767)); +#58061 = VECTOR('',#58062,1.); +#58062 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#58063 = ORIENTED_EDGE('',*,*,#58064,.T.); +#58064 = EDGE_CURVE('',#58057,#58065,#58067,.T.); +#58065 = VERTEX_POINT('',#58066); +#58066 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.)); +#58067 = CIRCLE('',#58068,0.25); +#58068 = AXIS2_PLACEMENT_3D('',#58069,#58070,#58071); +#58069 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25)); +#58070 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58071 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#58072 = ORIENTED_EDGE('',*,*,#58073,.T.); +#58073 = EDGE_CURVE('',#58065,#58074,#58076,.T.); +#58074 = VERTEX_POINT('',#58075); +#58075 = CARTESIAN_POINT('',(1.4,-1.2,0.)); +#58076 = LINE('',#58077,#58078); +#58077 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.)); +#58078 = VECTOR('',#58079,1.); +#58079 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58080 = ORIENTED_EDGE('',*,*,#58081,.T.); +#58081 = EDGE_CURVE('',#58074,#58082,#58084,.T.); +#58082 = VERTEX_POINT('',#58083); +#58083 = CARTESIAN_POINT('',(1.4,-1.2,0.15)); +#58084 = LINE('',#58085,#58086); +#58085 = CARTESIAN_POINT('',(1.4,-1.2,0.)); +#58086 = VECTOR('',#58087,1.); +#58087 = DIRECTION('',(0.,0.,1.)); +#58088 = ORIENTED_EDGE('',*,*,#58089,.T.); +#58089 = EDGE_CURVE('',#58082,#58090,#58092,.T.); +#58090 = VERTEX_POINT('',#58091); +#58091 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.15)); +#58092 = LINE('',#58093,#58094); +#58093 = CARTESIAN_POINT('',(1.4,-1.2,0.15)); +#58094 = VECTOR('',#58095,1.); +#58095 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#58096 = ORIENTED_EDGE('',*,*,#58097,.T.); +#58097 = EDGE_CURVE('',#58090,#58098,#58100,.T.); +#58098 = VERTEX_POINT('',#58099); +#58099 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233)); +#58100 = CIRCLE('',#58101,0.1); +#58101 = AXIS2_PLACEMENT_3D('',#58102,#58103,#58104); +#58102 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25)); +#58103 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58104 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#58105 = ORIENTED_EDGE('',*,*,#58106,.T.); +#58106 = EDGE_CURVE('',#58098,#58107,#58109,.T.); +#58107 = VERTEX_POINT('',#58108); +#58108 = CARTESIAN_POINT('',(1.096201938253,-1.2,0.693412044417)); +#58109 = LINE('',#58110,#58111); +#58110 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233)); +#58111 = VECTOR('',#58112,1.); +#58112 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#58113 = ORIENTED_EDGE('',*,*,#58114,.T.); +#58114 = EDGE_CURVE('',#58107,#58115,#58117,.T.); +#58115 = VERTEX_POINT('',#58116); +#58116 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#58117 = CIRCLE('',#58118,0.25); +#58118 = AXIS2_PLACEMENT_3D('',#58119,#58120,#58121); +#58119 = CARTESIAN_POINT('',(0.85,-1.2,0.65)); +#58120 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58121 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#58122 = ORIENTED_EDGE('',*,*,#58123,.T.); +#58123 = EDGE_CURVE('',#58115,#56686,#58124,.T.); +#58124 = LINE('',#58125,#58126); +#58125 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#58126 = VECTOR('',#58127,1.); +#58127 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#58128 = PLANE('',#58129); +#58129 = AXIS2_PLACEMENT_3D('',#58130,#58131,#58132); +#58130 = CARTESIAN_POINT('',(1.069123385139,-1.2,0.441695635315)); +#58131 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58132 = DIRECTION('',(0.,0.,1.)); +#58133 = ADVANCED_FACE('',(#58134),#58145,.T.); +#58134 = FACE_BOUND('',#58135,.T.); +#58135 = EDGE_LOOP('',(#58136,#58137,#58138,#58139)); +#58136 = ORIENTED_EDGE('',*,*,#57614,.T.); +#58137 = ORIENTED_EDGE('',*,*,#56786,.T.); +#58138 = ORIENTED_EDGE('',*,*,#57716,.F.); +#58139 = ORIENTED_EDGE('',*,*,#58140,.F.); +#58140 = EDGE_CURVE('',#57607,#57709,#58141,.T.); +#58141 = LINE('',#58142,#58143); +#58142 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417)); +#58143 = VECTOR('',#58144,1.); +#58144 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58145 = CYLINDRICAL_SURFACE('',#58146,0.25); +#58146 = AXIS2_PLACEMENT_3D('',#58147,#58148,#58149); +#58147 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#58148 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58149 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#58150 = ADVANCED_FACE('',(#58151),#58164,.F.); +#58151 = FACE_BOUND('',#58152,.F.); +#58152 = EDGE_LOOP('',(#58153,#58154,#58160,#58161,#58162,#58163)); +#58153 = ORIENTED_EDGE('',*,*,#57182,.F.); +#58154 = ORIENTED_EDGE('',*,*,#58155,.T.); +#58155 = EDGE_CURVE('',#57174,#57283,#58156,.T.); +#58156 = LINE('',#58157,#58158); +#58157 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#58158 = VECTOR('',#58159,1.); +#58159 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58160 = ORIENTED_EDGE('',*,*,#57291,.T.); +#58161 = ORIENTED_EDGE('',*,*,#57313,.T.); +#58162 = ORIENTED_EDGE('',*,*,#56833,.F.); +#58163 = ORIENTED_EDGE('',*,*,#57066,.F.); +#58164 = PLANE('',#58165); +#58165 = AXIS2_PLACEMENT_3D('',#58166,#58167,#58168); +#58166 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#58167 = DIRECTION('',(0.,0.,-1.)); +#58168 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#58169 = ADVANCED_FACE('',(#58170),#58183,.F.); +#58170 = FACE_BOUND('',#58171,.F.); +#58171 = EDGE_LOOP('',(#58172,#58173,#58179,#58180,#58181,#58182)); +#58172 = ORIENTED_EDGE('',*,*,#57405,.F.); +#58173 = ORIENTED_EDGE('',*,*,#58174,.T.); +#58174 = EDGE_CURVE('',#57397,#57506,#58175,.T.); +#58175 = LINE('',#58176,#58177); +#58176 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#58177 = VECTOR('',#58178,1.); +#58178 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58179 = ORIENTED_EDGE('',*,*,#57514,.T.); +#58180 = ORIENTED_EDGE('',*,*,#57531,.T.); +#58181 = ORIENTED_EDGE('',*,*,#56849,.F.); +#58182 = ORIENTED_EDGE('',*,*,#57306,.F.); +#58183 = PLANE('',#58184); +#58184 = AXIS2_PLACEMENT_3D('',#58185,#58186,#58187); +#58185 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#58186 = DIRECTION('',(0.,0.,-1.)); +#58187 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#58188 = ADVANCED_FACE('',(#58189,#58218),#58229,.T.); +#58189 = FACE_BOUND('',#58190,.T.); +#58190 = EDGE_LOOP('',(#58191,#58192,#58193,#58194,#58202,#58210,#58216, + #58217)); +#58191 = ORIENTED_EDGE('',*,*,#56924,.F.); +#58192 = ORIENTED_EDGE('',*,*,#56901,.F.); +#58193 = ORIENTED_EDGE('',*,*,#56872,.F.); +#58194 = ORIENTED_EDGE('',*,*,#58195,.F.); +#58195 = EDGE_CURVE('',#58196,#56873,#58198,.T.); +#58196 = VERTEX_POINT('',#58197); +#58197 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#58198 = LINE('',#58199,#58200); +#58199 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#58200 = VECTOR('',#58201,1.); +#58201 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#58202 = ORIENTED_EDGE('',*,*,#58203,.F.); +#58203 = EDGE_CURVE('',#58204,#58196,#58206,.T.); +#58204 = VERTEX_POINT('',#58205); +#58205 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#58206 = LINE('',#58207,#58208); +#58207 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#58208 = VECTOR('',#58209,1.); +#58209 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#58210 = ORIENTED_EDGE('',*,*,#58211,.F.); +#58211 = EDGE_CURVE('',#56996,#58204,#58212,.T.); +#58212 = LINE('',#58213,#58214); +#58213 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#58214 = VECTOR('',#58215,1.); +#58215 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#58216 = ORIENTED_EDGE('',*,*,#57002,.F.); +#58217 = ORIENTED_EDGE('',*,*,#56947,.F.); +#58218 = FACE_BOUND('',#58219,.T.); +#58219 = EDGE_LOOP('',(#58220)); +#58220 = ORIENTED_EDGE('',*,*,#58221,.T.); +#58221 = EDGE_CURVE('',#58222,#58222,#58224,.T.); +#58222 = VERTEX_POINT('',#58223); +#58223 = CARTESIAN_POINT('',(-0.483648457443,1.083648457443,1.55)); +#58224 = CIRCLE('',#58225,5.E-02); +#58225 = AXIS2_PLACEMENT_3D('',#58226,#58227,#58228); +#58226 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55)); +#58227 = DIRECTION('',(0.,-0.,-1.)); +#58228 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58229 = PLANE('',#58230); +#58230 = AXIS2_PLACEMENT_3D('',#58231,#58232,#58233); +#58231 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#58232 = DIRECTION('',(0.,0.,1.)); +#58233 = DIRECTION('',(0.436386464522,-0.899759330922,0.)); +#58234 = ADVANCED_FACE('',(#58235),#58245,.F.); +#58235 = FACE_BOUND('',#58236,.F.); +#58236 = EDGE_LOOP('',(#58237,#58238,#58239,#58240)); +#58237 = ORIENTED_EDGE('',*,*,#57073,.T.); +#58238 = ORIENTED_EDGE('',*,*,#56880,.T.); +#58239 = ORIENTED_EDGE('',*,*,#58195,.F.); +#58240 = ORIENTED_EDGE('',*,*,#58241,.F.); +#58241 = EDGE_CURVE('',#57074,#58196,#58242,.T.); +#58242 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#58243,#58244),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#58243 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#58244 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#58245 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58246,#58247) + ,(#58248,#58249 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#58246 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#58247 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#58248 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#58249 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#58250 = ADVANCED_FACE('',(#58251),#58264,.F.); +#58251 = FACE_BOUND('',#58252,.F.); +#58252 = EDGE_LOOP('',(#58253,#58254,#58260,#58261,#58262,#58263)); +#58253 = ORIENTED_EDGE('',*,*,#58014,.F.); +#58254 = ORIENTED_EDGE('',*,*,#58255,.T.); +#58255 = EDGE_CURVE('',#58006,#58115,#58256,.T.); +#58256 = LINE('',#58257,#58258); +#58257 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#58258 = VECTOR('',#58259,1.); +#58259 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58260 = ORIENTED_EDGE('',*,*,#58123,.T.); +#58261 = ORIENTED_EDGE('',*,*,#57055,.T.); +#58262 = ORIENTED_EDGE('',*,*,#56979,.F.); +#58263 = ORIENTED_EDGE('',*,*,#57921,.F.); +#58264 = PLANE('',#58265); +#58265 = AXIS2_PLACEMENT_3D('',#58266,#58267,#58268); +#58266 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#58267 = DIRECTION('',(0.,0.,-1.)); +#58268 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#58269 = ADVANCED_FACE('',(#58270),#58280,.F.); +#58270 = FACE_BOUND('',#58271,.F.); +#58271 = EDGE_LOOP('',(#58272,#58273,#58278,#58279)); +#58272 = ORIENTED_EDGE('',*,*,#57089,.T.); +#58273 = ORIENTED_EDGE('',*,*,#58274,.T.); +#58274 = EDGE_CURVE('',#57082,#58204,#58275,.T.); +#58275 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#58276,#58277),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#58276 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#58277 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#58278 = ORIENTED_EDGE('',*,*,#58211,.F.); +#58279 = ORIENTED_EDGE('',*,*,#56995,.F.); +#58280 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58281,#58282) + ,(#58283,#58284 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#58281 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#58282 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#58283 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#58284 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#58285 = ADVANCED_FACE('',(#58286),#58297,.T.); +#58286 = FACE_BOUND('',#58287,.T.); +#58287 = EDGE_LOOP('',(#58288,#58289,#58290,#58291)); +#58288 = ORIENTED_EDGE('',*,*,#57801,.T.); +#58289 = ORIENTED_EDGE('',*,*,#57025,.T.); +#58290 = ORIENTED_EDGE('',*,*,#57903,.F.); +#58291 = ORIENTED_EDGE('',*,*,#58292,.F.); +#58292 = EDGE_CURVE('',#57794,#57896,#58293,.T.); +#58293 = LINE('',#58294,#58295); +#58294 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417)); +#58295 = VECTOR('',#58296,1.); +#58296 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58297 = CYLINDRICAL_SURFACE('',#58298,0.25); +#58298 = AXIS2_PLACEMENT_3D('',#58299,#58300,#58301); +#58299 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#58300 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58301 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#58302 = ADVANCED_FACE('',(#58303),#58309,.F.); +#58303 = FACE_BOUND('',#58304,.F.); +#58304 = EDGE_LOOP('',(#58305,#58306,#58307,#58308)); +#58305 = ORIENTED_EDGE('',*,*,#57081,.T.); +#58306 = ORIENTED_EDGE('',*,*,#58241,.T.); +#58307 = ORIENTED_EDGE('',*,*,#58203,.F.); +#58308 = ORIENTED_EDGE('',*,*,#58274,.F.); +#58309 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58310,#58311) + ,(#58312,#58313 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#58310 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#58311 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#58312 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#58313 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#58314 = ADVANCED_FACE('',(#58315),#58326,.T.); +#58315 = FACE_BOUND('',#58316,.T.); +#58316 = EDGE_LOOP('',(#58317,#58318,#58319,#58320)); +#58317 = ORIENTED_EDGE('',*,*,#57173,.T.); +#58318 = ORIENTED_EDGE('',*,*,#58155,.T.); +#58319 = ORIENTED_EDGE('',*,*,#57282,.F.); +#58320 = ORIENTED_EDGE('',*,*,#58321,.F.); +#58321 = EDGE_CURVE('',#57166,#57275,#58322,.T.); +#58322 = LINE('',#58323,#58324); +#58323 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417)); +#58324 = VECTOR('',#58325,1.); +#58325 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58326 = CYLINDRICAL_SURFACE('',#58327,0.25); +#58327 = AXIS2_PLACEMENT_3D('',#58328,#58329,#58330); +#58328 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#58329 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58330 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#58331 = ADVANCED_FACE('',(#58332),#58343,.F.); +#58332 = FACE_BOUND('',#58333,.F.); +#58333 = EDGE_LOOP('',(#58334,#58340,#58341,#58342)); +#58334 = ORIENTED_EDGE('',*,*,#58335,.T.); +#58335 = EDGE_CURVE('',#57157,#57266,#58336,.T.); +#58336 = LINE('',#58337,#58338); +#58337 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#58338 = VECTOR('',#58339,1.); +#58339 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58340 = ORIENTED_EDGE('',*,*,#57274,.T.); +#58341 = ORIENTED_EDGE('',*,*,#58321,.F.); +#58342 = ORIENTED_EDGE('',*,*,#57165,.F.); +#58343 = PLANE('',#58344); +#58344 = AXIS2_PLACEMENT_3D('',#58345,#58346,#58347); +#58345 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#58346 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#58347 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#58348 = ADVANCED_FACE('',(#58349),#58360,.F.); +#58349 = FACE_BOUND('',#58350,.F.); +#58350 = EDGE_LOOP('',(#58351,#58357,#58358,#58359)); +#58351 = ORIENTED_EDGE('',*,*,#58352,.T.); +#58352 = EDGE_CURVE('',#57149,#57258,#58353,.T.); +#58353 = LINE('',#58354,#58355); +#58354 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15)); +#58355 = VECTOR('',#58356,1.); +#58356 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58357 = ORIENTED_EDGE('',*,*,#57265,.T.); +#58358 = ORIENTED_EDGE('',*,*,#58335,.F.); +#58359 = ORIENTED_EDGE('',*,*,#57156,.F.); +#58360 = CYLINDRICAL_SURFACE('',#58361,0.1); +#58361 = AXIS2_PLACEMENT_3D('',#58362,#58363,#58364); +#58362 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#58363 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58364 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#58365 = ADVANCED_FACE('',(#58366),#58377,.F.); +#58366 = FACE_BOUND('',#58367,.F.); +#58367 = EDGE_LOOP('',(#58368,#58374,#58375,#58376)); +#58368 = ORIENTED_EDGE('',*,*,#58369,.T.); +#58369 = EDGE_CURVE('',#57141,#57250,#58370,.T.); +#58370 = LINE('',#58371,#58372); +#58371 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#58372 = VECTOR('',#58373,1.); +#58373 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58374 = ORIENTED_EDGE('',*,*,#57257,.T.); +#58375 = ORIENTED_EDGE('',*,*,#58352,.F.); +#58376 = ORIENTED_EDGE('',*,*,#57148,.F.); +#58377 = PLANE('',#58378); +#58378 = AXIS2_PLACEMENT_3D('',#58379,#58380,#58381); +#58379 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#58380 = DIRECTION('',(0.,0.,-1.)); +#58381 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#58382 = ADVANCED_FACE('',(#58383),#58394,.F.); +#58383 = FACE_BOUND('',#58384,.F.); +#58384 = EDGE_LOOP('',(#58385,#58391,#58392,#58393)); +#58385 = ORIENTED_EDGE('',*,*,#58386,.T.); +#58386 = EDGE_CURVE('',#57133,#57242,#58387,.T.); +#58387 = LINE('',#58388,#58389); +#58388 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#58389 = VECTOR('',#58390,1.); +#58390 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58391 = ORIENTED_EDGE('',*,*,#57249,.T.); +#58392 = ORIENTED_EDGE('',*,*,#58369,.F.); +#58393 = ORIENTED_EDGE('',*,*,#57140,.F.); +#58394 = PLANE('',#58395); +#58395 = AXIS2_PLACEMENT_3D('',#58396,#58397,#58398); +#58396 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#58397 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#58398 = DIRECTION('',(0.,0.,1.)); +#58399 = ADVANCED_FACE('',(#58400),#58411,.F.); +#58400 = FACE_BOUND('',#58401,.F.); +#58401 = EDGE_LOOP('',(#58402,#58408,#58409,#58410)); +#58402 = ORIENTED_EDGE('',*,*,#58403,.T.); +#58403 = EDGE_CURVE('',#57124,#57233,#58404,.T.); +#58404 = LINE('',#58405,#58406); +#58405 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#58406 = VECTOR('',#58407,1.); +#58407 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58408 = ORIENTED_EDGE('',*,*,#57241,.T.); +#58409 = ORIENTED_EDGE('',*,*,#58386,.F.); +#58410 = ORIENTED_EDGE('',*,*,#57132,.F.); +#58411 = PLANE('',#58412); +#58412 = AXIS2_PLACEMENT_3D('',#58413,#58414,#58415); +#58413 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#58414 = DIRECTION('',(0.,0.,1.)); +#58415 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58416 = ADVANCED_FACE('',(#58417),#58428,.T.); +#58417 = FACE_BOUND('',#58418,.T.); +#58418 = EDGE_LOOP('',(#58419,#58420,#58421,#58422)); +#58419 = ORIENTED_EDGE('',*,*,#57123,.T.); +#58420 = ORIENTED_EDGE('',*,*,#58403,.T.); +#58421 = ORIENTED_EDGE('',*,*,#57232,.F.); +#58422 = ORIENTED_EDGE('',*,*,#58423,.F.); +#58423 = EDGE_CURVE('',#57116,#57225,#58424,.T.); +#58424 = LINE('',#58425,#58426); +#58425 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583)); +#58426 = VECTOR('',#58427,1.); +#58427 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58428 = CYLINDRICAL_SURFACE('',#58429,0.25); +#58429 = AXIS2_PLACEMENT_3D('',#58430,#58431,#58432); +#58430 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#58431 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58432 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#58433 = ADVANCED_FACE('',(#58434),#58440,.F.); +#58434 = FACE_BOUND('',#58435,.F.); +#58435 = EDGE_LOOP('',(#58436,#58437,#58438,#58439)); +#58436 = ORIENTED_EDGE('',*,*,#57206,.T.); +#58437 = ORIENTED_EDGE('',*,*,#57224,.T.); +#58438 = ORIENTED_EDGE('',*,*,#58423,.F.); +#58439 = ORIENTED_EDGE('',*,*,#57115,.F.); +#58440 = PLANE('',#58441); +#58441 = AXIS2_PLACEMENT_3D('',#58442,#58443,#58444); +#58442 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#58443 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#58444 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#58445 = ADVANCED_FACE('',(#58446),#58457,.T.); +#58446 = FACE_BOUND('',#58447,.T.); +#58447 = EDGE_LOOP('',(#58448,#58449,#58450,#58451)); +#58448 = ORIENTED_EDGE('',*,*,#57396,.T.); +#58449 = ORIENTED_EDGE('',*,*,#58174,.T.); +#58450 = ORIENTED_EDGE('',*,*,#57505,.F.); +#58451 = ORIENTED_EDGE('',*,*,#58452,.F.); +#58452 = EDGE_CURVE('',#57389,#57498,#58453,.T.); +#58453 = LINE('',#58454,#58455); +#58454 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417)); +#58455 = VECTOR('',#58456,1.); +#58456 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58457 = CYLINDRICAL_SURFACE('',#58458,0.25); +#58458 = AXIS2_PLACEMENT_3D('',#58459,#58460,#58461); +#58459 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#58460 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58461 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#58462 = ADVANCED_FACE('',(#58463),#58474,.F.); +#58463 = FACE_BOUND('',#58464,.F.); +#58464 = EDGE_LOOP('',(#58465,#58471,#58472,#58473)); +#58465 = ORIENTED_EDGE('',*,*,#58466,.T.); +#58466 = EDGE_CURVE('',#57380,#57489,#58467,.T.); +#58467 = LINE('',#58468,#58469); +#58468 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#58469 = VECTOR('',#58470,1.); +#58470 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58471 = ORIENTED_EDGE('',*,*,#57497,.T.); +#58472 = ORIENTED_EDGE('',*,*,#58452,.F.); +#58473 = ORIENTED_EDGE('',*,*,#57388,.F.); +#58474 = PLANE('',#58475); +#58475 = AXIS2_PLACEMENT_3D('',#58476,#58477,#58478); +#58476 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#58477 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#58478 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#58479 = ADVANCED_FACE('',(#58480),#58491,.F.); +#58480 = FACE_BOUND('',#58481,.F.); +#58481 = EDGE_LOOP('',(#58482,#58488,#58489,#58490)); +#58482 = ORIENTED_EDGE('',*,*,#58483,.T.); +#58483 = EDGE_CURVE('',#57372,#57481,#58484,.T.); +#58484 = LINE('',#58485,#58486); +#58485 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15)); +#58486 = VECTOR('',#58487,1.); +#58487 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58488 = ORIENTED_EDGE('',*,*,#57488,.T.); +#58489 = ORIENTED_EDGE('',*,*,#58466,.F.); +#58490 = ORIENTED_EDGE('',*,*,#57379,.F.); +#58491 = CYLINDRICAL_SURFACE('',#58492,0.1); +#58492 = AXIS2_PLACEMENT_3D('',#58493,#58494,#58495); +#58493 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#58494 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58495 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#58496 = ADVANCED_FACE('',(#58497),#58508,.F.); +#58497 = FACE_BOUND('',#58498,.F.); +#58498 = EDGE_LOOP('',(#58499,#58505,#58506,#58507)); +#58499 = ORIENTED_EDGE('',*,*,#58500,.T.); +#58500 = EDGE_CURVE('',#57364,#57473,#58501,.T.); +#58501 = LINE('',#58502,#58503); +#58502 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#58503 = VECTOR('',#58504,1.); +#58504 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58505 = ORIENTED_EDGE('',*,*,#57480,.T.); +#58506 = ORIENTED_EDGE('',*,*,#58483,.F.); +#58507 = ORIENTED_EDGE('',*,*,#57371,.F.); +#58508 = PLANE('',#58509); +#58509 = AXIS2_PLACEMENT_3D('',#58510,#58511,#58512); +#58510 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#58511 = DIRECTION('',(0.,0.,-1.)); +#58512 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#58513 = ADVANCED_FACE('',(#58514),#58525,.F.); +#58514 = FACE_BOUND('',#58515,.F.); +#58515 = EDGE_LOOP('',(#58516,#58522,#58523,#58524)); +#58516 = ORIENTED_EDGE('',*,*,#58517,.T.); +#58517 = EDGE_CURVE('',#57356,#57465,#58518,.T.); +#58518 = LINE('',#58519,#58520); +#58519 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#58520 = VECTOR('',#58521,1.); +#58521 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58522 = ORIENTED_EDGE('',*,*,#57472,.T.); +#58523 = ORIENTED_EDGE('',*,*,#58500,.F.); +#58524 = ORIENTED_EDGE('',*,*,#57363,.F.); +#58525 = PLANE('',#58526); +#58526 = AXIS2_PLACEMENT_3D('',#58527,#58528,#58529); +#58527 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#58528 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#58529 = DIRECTION('',(0.,0.,1.)); +#58530 = ADVANCED_FACE('',(#58531),#58542,.F.); +#58531 = FACE_BOUND('',#58532,.F.); +#58532 = EDGE_LOOP('',(#58533,#58539,#58540,#58541)); +#58533 = ORIENTED_EDGE('',*,*,#58534,.T.); +#58534 = EDGE_CURVE('',#57347,#57456,#58535,.T.); +#58535 = LINE('',#58536,#58537); +#58536 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#58537 = VECTOR('',#58538,1.); +#58538 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58539 = ORIENTED_EDGE('',*,*,#57464,.T.); +#58540 = ORIENTED_EDGE('',*,*,#58517,.F.); +#58541 = ORIENTED_EDGE('',*,*,#57355,.F.); +#58542 = PLANE('',#58543); +#58543 = AXIS2_PLACEMENT_3D('',#58544,#58545,#58546); +#58544 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#58545 = DIRECTION('',(0.,0.,1.)); +#58546 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58547 = ADVANCED_FACE('',(#58548),#58559,.T.); +#58548 = FACE_BOUND('',#58549,.T.); +#58549 = EDGE_LOOP('',(#58550,#58551,#58552,#58553)); +#58550 = ORIENTED_EDGE('',*,*,#57346,.T.); +#58551 = ORIENTED_EDGE('',*,*,#58534,.T.); +#58552 = ORIENTED_EDGE('',*,*,#57455,.F.); +#58553 = ORIENTED_EDGE('',*,*,#58554,.F.); +#58554 = EDGE_CURVE('',#57339,#57448,#58555,.T.); +#58555 = LINE('',#58556,#58557); +#58556 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583)); +#58557 = VECTOR('',#58558,1.); +#58558 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58559 = CYLINDRICAL_SURFACE('',#58560,0.25); +#58560 = AXIS2_PLACEMENT_3D('',#58561,#58562,#58563); +#58561 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#58562 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58563 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#58564 = ADVANCED_FACE('',(#58565),#58571,.F.); +#58565 = FACE_BOUND('',#58566,.F.); +#58566 = EDGE_LOOP('',(#58567,#58568,#58569,#58570)); +#58567 = ORIENTED_EDGE('',*,*,#57429,.T.); +#58568 = ORIENTED_EDGE('',*,*,#57447,.T.); +#58569 = ORIENTED_EDGE('',*,*,#58554,.F.); +#58570 = ORIENTED_EDGE('',*,*,#57338,.F.); +#58571 = PLANE('',#58572); +#58572 = AXIS2_PLACEMENT_3D('',#58573,#58574,#58575); +#58573 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#58574 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#58575 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#58576 = ADVANCED_FACE('',(#58577),#58588,.F.); +#58577 = FACE_BOUND('',#58578,.F.); +#58578 = EDGE_LOOP('',(#58579,#58585,#58586,#58587)); +#58579 = ORIENTED_EDGE('',*,*,#58580,.T.); +#58580 = EDGE_CURVE('',#57598,#57700,#58581,.T.); +#58581 = LINE('',#58582,#58583); +#58582 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#58583 = VECTOR('',#58584,1.); +#58584 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58585 = ORIENTED_EDGE('',*,*,#57708,.T.); +#58586 = ORIENTED_EDGE('',*,*,#58140,.F.); +#58587 = ORIENTED_EDGE('',*,*,#57606,.F.); +#58588 = PLANE('',#58589); +#58589 = AXIS2_PLACEMENT_3D('',#58590,#58591,#58592); +#58590 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#58591 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#58592 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#58593 = ADVANCED_FACE('',(#58594),#58605,.F.); +#58594 = FACE_BOUND('',#58595,.F.); +#58595 = EDGE_LOOP('',(#58596,#58602,#58603,#58604)); +#58596 = ORIENTED_EDGE('',*,*,#58597,.T.); +#58597 = EDGE_CURVE('',#57590,#57692,#58598,.T.); +#58598 = LINE('',#58599,#58600); +#58599 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15)); +#58600 = VECTOR('',#58601,1.); +#58601 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58602 = ORIENTED_EDGE('',*,*,#57699,.T.); +#58603 = ORIENTED_EDGE('',*,*,#58580,.F.); +#58604 = ORIENTED_EDGE('',*,*,#57597,.F.); +#58605 = CYLINDRICAL_SURFACE('',#58606,0.1); +#58606 = AXIS2_PLACEMENT_3D('',#58607,#58608,#58609); +#58607 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#58608 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58609 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#58610 = ADVANCED_FACE('',(#58611),#58622,.F.); +#58611 = FACE_BOUND('',#58612,.F.); +#58612 = EDGE_LOOP('',(#58613,#58619,#58620,#58621)); +#58613 = ORIENTED_EDGE('',*,*,#58614,.T.); +#58614 = EDGE_CURVE('',#57582,#57684,#58615,.T.); +#58615 = LINE('',#58616,#58617); +#58616 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#58617 = VECTOR('',#58618,1.); +#58618 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58619 = ORIENTED_EDGE('',*,*,#57691,.T.); +#58620 = ORIENTED_EDGE('',*,*,#58597,.F.); +#58621 = ORIENTED_EDGE('',*,*,#57589,.F.); +#58622 = PLANE('',#58623); +#58623 = AXIS2_PLACEMENT_3D('',#58624,#58625,#58626); +#58624 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#58625 = DIRECTION('',(0.,0.,-1.)); +#58626 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#58627 = ADVANCED_FACE('',(#58628),#58639,.F.); +#58628 = FACE_BOUND('',#58629,.F.); +#58629 = EDGE_LOOP('',(#58630,#58636,#58637,#58638)); +#58630 = ORIENTED_EDGE('',*,*,#58631,.T.); +#58631 = EDGE_CURVE('',#57574,#57676,#58632,.T.); +#58632 = LINE('',#58633,#58634); +#58633 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#58634 = VECTOR('',#58635,1.); +#58635 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58636 = ORIENTED_EDGE('',*,*,#57683,.T.); +#58637 = ORIENTED_EDGE('',*,*,#58614,.F.); +#58638 = ORIENTED_EDGE('',*,*,#57581,.F.); +#58639 = PLANE('',#58640); +#58640 = AXIS2_PLACEMENT_3D('',#58641,#58642,#58643); +#58641 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#58642 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#58643 = DIRECTION('',(0.,0.,1.)); +#58644 = ADVANCED_FACE('',(#58645),#58656,.F.); +#58645 = FACE_BOUND('',#58646,.F.); +#58646 = EDGE_LOOP('',(#58647,#58653,#58654,#58655)); +#58647 = ORIENTED_EDGE('',*,*,#58648,.T.); +#58648 = EDGE_CURVE('',#57565,#57667,#58649,.T.); +#58649 = LINE('',#58650,#58651); +#58650 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#58651 = VECTOR('',#58652,1.); +#58652 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58653 = ORIENTED_EDGE('',*,*,#57675,.T.); +#58654 = ORIENTED_EDGE('',*,*,#58631,.F.); +#58655 = ORIENTED_EDGE('',*,*,#57573,.F.); +#58656 = PLANE('',#58657); +#58657 = AXIS2_PLACEMENT_3D('',#58658,#58659,#58660); +#58658 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#58659 = DIRECTION('',(0.,0.,1.)); +#58660 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#58661 = ADVANCED_FACE('',(#58662),#58673,.T.); +#58662 = FACE_BOUND('',#58663,.T.); +#58663 = EDGE_LOOP('',(#58664,#58665,#58666,#58667)); +#58664 = ORIENTED_EDGE('',*,*,#57564,.T.); +#58665 = ORIENTED_EDGE('',*,*,#58648,.T.); +#58666 = ORIENTED_EDGE('',*,*,#57666,.F.); +#58667 = ORIENTED_EDGE('',*,*,#58668,.F.); +#58668 = EDGE_CURVE('',#57557,#57659,#58669,.T.); +#58669 = LINE('',#58670,#58671); +#58670 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583)); +#58671 = VECTOR('',#58672,1.); +#58672 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#58673 = CYLINDRICAL_SURFACE('',#58674,0.25); +#58674 = AXIS2_PLACEMENT_3D('',#58675,#58676,#58677); +#58675 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#58676 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#58677 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#58678 = ADVANCED_FACE('',(#58679),#58685,.F.); +#58679 = FACE_BOUND('',#58680,.F.); +#58680 = EDGE_LOOP('',(#58681,#58682,#58683,#58684)); +#58681 = ORIENTED_EDGE('',*,*,#57640,.T.); +#58682 = ORIENTED_EDGE('',*,*,#57658,.T.); +#58683 = ORIENTED_EDGE('',*,*,#58668,.F.); +#58684 = ORIENTED_EDGE('',*,*,#57556,.F.); +#58685 = PLANE('',#58686); +#58686 = AXIS2_PLACEMENT_3D('',#58687,#58688,#58689); +#58687 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#58688 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#58689 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#58690 = ADVANCED_FACE('',(#58691),#58702,.F.); +#58691 = FACE_BOUND('',#58692,.F.); +#58692 = EDGE_LOOP('',(#58693,#58699,#58700,#58701)); +#58693 = ORIENTED_EDGE('',*,*,#58694,.T.); +#58694 = EDGE_CURVE('',#57785,#57887,#58695,.T.); +#58695 = LINE('',#58696,#58697); +#58696 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#58697 = VECTOR('',#58698,1.); +#58698 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58699 = ORIENTED_EDGE('',*,*,#57895,.T.); +#58700 = ORIENTED_EDGE('',*,*,#58292,.F.); +#58701 = ORIENTED_EDGE('',*,*,#57793,.F.); +#58702 = PLANE('',#58703); +#58703 = AXIS2_PLACEMENT_3D('',#58704,#58705,#58706); +#58704 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#58705 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#58706 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#58707 = ADVANCED_FACE('',(#58708),#58719,.F.); +#58708 = FACE_BOUND('',#58709,.F.); +#58709 = EDGE_LOOP('',(#58710,#58716,#58717,#58718)); +#58710 = ORIENTED_EDGE('',*,*,#58711,.T.); +#58711 = EDGE_CURVE('',#57777,#57879,#58712,.T.); +#58712 = LINE('',#58713,#58714); +#58713 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15)); +#58714 = VECTOR('',#58715,1.); +#58715 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58716 = ORIENTED_EDGE('',*,*,#57886,.T.); +#58717 = ORIENTED_EDGE('',*,*,#58694,.F.); +#58718 = ORIENTED_EDGE('',*,*,#57784,.F.); +#58719 = CYLINDRICAL_SURFACE('',#58720,0.1); +#58720 = AXIS2_PLACEMENT_3D('',#58721,#58722,#58723); +#58721 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#58722 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58723 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#58724 = ADVANCED_FACE('',(#58725),#58736,.F.); +#58725 = FACE_BOUND('',#58726,.F.); +#58726 = EDGE_LOOP('',(#58727,#58733,#58734,#58735)); +#58727 = ORIENTED_EDGE('',*,*,#58728,.T.); +#58728 = EDGE_CURVE('',#57769,#57871,#58729,.T.); +#58729 = LINE('',#58730,#58731); +#58730 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#58731 = VECTOR('',#58732,1.); +#58732 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58733 = ORIENTED_EDGE('',*,*,#57878,.T.); +#58734 = ORIENTED_EDGE('',*,*,#58711,.F.); +#58735 = ORIENTED_EDGE('',*,*,#57776,.F.); +#58736 = PLANE('',#58737); +#58737 = AXIS2_PLACEMENT_3D('',#58738,#58739,#58740); +#58738 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#58739 = DIRECTION('',(0.,0.,-1.)); +#58740 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#58741 = ADVANCED_FACE('',(#58742),#58753,.F.); +#58742 = FACE_BOUND('',#58743,.F.); +#58743 = EDGE_LOOP('',(#58744,#58750,#58751,#58752)); +#58744 = ORIENTED_EDGE('',*,*,#58745,.T.); +#58745 = EDGE_CURVE('',#57761,#57863,#58746,.T.); +#58746 = LINE('',#58747,#58748); +#58747 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#58748 = VECTOR('',#58749,1.); +#58749 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58750 = ORIENTED_EDGE('',*,*,#57870,.T.); +#58751 = ORIENTED_EDGE('',*,*,#58728,.F.); +#58752 = ORIENTED_EDGE('',*,*,#57768,.F.); +#58753 = PLANE('',#58754); +#58754 = AXIS2_PLACEMENT_3D('',#58755,#58756,#58757); +#58755 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#58756 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#58757 = DIRECTION('',(0.,0.,1.)); +#58758 = ADVANCED_FACE('',(#58759),#58770,.F.); +#58759 = FACE_BOUND('',#58760,.F.); +#58760 = EDGE_LOOP('',(#58761,#58767,#58768,#58769)); +#58761 = ORIENTED_EDGE('',*,*,#58762,.T.); +#58762 = EDGE_CURVE('',#57752,#57854,#58763,.T.); +#58763 = LINE('',#58764,#58765); +#58764 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#58765 = VECTOR('',#58766,1.); +#58766 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58767 = ORIENTED_EDGE('',*,*,#57862,.T.); +#58768 = ORIENTED_EDGE('',*,*,#58745,.F.); +#58769 = ORIENTED_EDGE('',*,*,#57760,.F.); +#58770 = PLANE('',#58771); +#58771 = AXIS2_PLACEMENT_3D('',#58772,#58773,#58774); +#58772 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#58773 = DIRECTION('',(0.,0.,1.)); +#58774 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58775 = ADVANCED_FACE('',(#58776),#58787,.T.); +#58776 = FACE_BOUND('',#58777,.T.); +#58777 = EDGE_LOOP('',(#58778,#58779,#58780,#58781)); +#58778 = ORIENTED_EDGE('',*,*,#57751,.T.); +#58779 = ORIENTED_EDGE('',*,*,#58762,.T.); +#58780 = ORIENTED_EDGE('',*,*,#57853,.F.); +#58781 = ORIENTED_EDGE('',*,*,#58782,.F.); +#58782 = EDGE_CURVE('',#57744,#57846,#58783,.T.); +#58783 = LINE('',#58784,#58785); +#58784 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583)); +#58785 = VECTOR('',#58786,1.); +#58786 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58787 = CYLINDRICAL_SURFACE('',#58788,0.25); +#58788 = AXIS2_PLACEMENT_3D('',#58789,#58790,#58791); +#58789 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#58790 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58791 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#58792 = ADVANCED_FACE('',(#58793),#58799,.F.); +#58793 = FACE_BOUND('',#58794,.F.); +#58794 = EDGE_LOOP('',(#58795,#58796,#58797,#58798)); +#58795 = ORIENTED_EDGE('',*,*,#57827,.T.); +#58796 = ORIENTED_EDGE('',*,*,#57845,.T.); +#58797 = ORIENTED_EDGE('',*,*,#58782,.F.); +#58798 = ORIENTED_EDGE('',*,*,#57743,.F.); +#58799 = PLANE('',#58800); +#58800 = AXIS2_PLACEMENT_3D('',#58801,#58802,#58803); +#58801 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#58802 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012) + ); +#58803 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#58804 = ADVANCED_FACE('',(#58805),#58816,.T.); +#58805 = FACE_BOUND('',#58806,.T.); +#58806 = EDGE_LOOP('',(#58807,#58808,#58809,#58810)); +#58807 = ORIENTED_EDGE('',*,*,#58005,.T.); +#58808 = ORIENTED_EDGE('',*,*,#58255,.T.); +#58809 = ORIENTED_EDGE('',*,*,#58114,.F.); +#58810 = ORIENTED_EDGE('',*,*,#58811,.F.); +#58811 = EDGE_CURVE('',#57998,#58107,#58812,.T.); +#58812 = LINE('',#58813,#58814); +#58813 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417)); +#58814 = VECTOR('',#58815,1.); +#58815 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58816 = CYLINDRICAL_SURFACE('',#58817,0.25); +#58817 = AXIS2_PLACEMENT_3D('',#58818,#58819,#58820); +#58818 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#58819 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58820 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#58821 = ADVANCED_FACE('',(#58822),#58833,.F.); +#58822 = FACE_BOUND('',#58823,.F.); +#58823 = EDGE_LOOP('',(#58824,#58830,#58831,#58832)); +#58824 = ORIENTED_EDGE('',*,*,#58825,.T.); +#58825 = EDGE_CURVE('',#57989,#58098,#58826,.T.); +#58826 = LINE('',#58827,#58828); +#58827 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#58828 = VECTOR('',#58829,1.); +#58829 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58830 = ORIENTED_EDGE('',*,*,#58106,.T.); +#58831 = ORIENTED_EDGE('',*,*,#58811,.F.); +#58832 = ORIENTED_EDGE('',*,*,#57997,.F.); +#58833 = PLANE('',#58834); +#58834 = AXIS2_PLACEMENT_3D('',#58835,#58836,#58837); +#58835 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#58836 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#58837 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#58838 = ADVANCED_FACE('',(#58839),#58850,.F.); +#58839 = FACE_BOUND('',#58840,.F.); +#58840 = EDGE_LOOP('',(#58841,#58847,#58848,#58849)); +#58841 = ORIENTED_EDGE('',*,*,#58842,.T.); +#58842 = EDGE_CURVE('',#57981,#58090,#58843,.T.); +#58843 = LINE('',#58844,#58845); +#58844 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15)); +#58845 = VECTOR('',#58846,1.); +#58846 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58847 = ORIENTED_EDGE('',*,*,#58097,.T.); +#58848 = ORIENTED_EDGE('',*,*,#58825,.F.); +#58849 = ORIENTED_EDGE('',*,*,#57988,.F.); +#58850 = CYLINDRICAL_SURFACE('',#58851,0.1); +#58851 = AXIS2_PLACEMENT_3D('',#58852,#58853,#58854); +#58852 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#58853 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58854 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#58855 = ADVANCED_FACE('',(#58856),#58867,.F.); +#58856 = FACE_BOUND('',#58857,.F.); +#58857 = EDGE_LOOP('',(#58858,#58864,#58865,#58866)); +#58858 = ORIENTED_EDGE('',*,*,#58859,.T.); +#58859 = EDGE_CURVE('',#57973,#58082,#58860,.T.); +#58860 = LINE('',#58861,#58862); +#58861 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#58862 = VECTOR('',#58863,1.); +#58863 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58864 = ORIENTED_EDGE('',*,*,#58089,.T.); +#58865 = ORIENTED_EDGE('',*,*,#58842,.F.); +#58866 = ORIENTED_EDGE('',*,*,#57980,.F.); +#58867 = PLANE('',#58868); +#58868 = AXIS2_PLACEMENT_3D('',#58869,#58870,#58871); +#58869 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#58870 = DIRECTION('',(0.,0.,-1.)); +#58871 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#58872 = ADVANCED_FACE('',(#58873),#58884,.F.); +#58873 = FACE_BOUND('',#58874,.F.); +#58874 = EDGE_LOOP('',(#58875,#58881,#58882,#58883)); +#58875 = ORIENTED_EDGE('',*,*,#58876,.T.); +#58876 = EDGE_CURVE('',#57965,#58074,#58877,.T.); +#58877 = LINE('',#58878,#58879); +#58878 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#58879 = VECTOR('',#58880,1.); +#58880 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58881 = ORIENTED_EDGE('',*,*,#58081,.T.); +#58882 = ORIENTED_EDGE('',*,*,#58859,.F.); +#58883 = ORIENTED_EDGE('',*,*,#57972,.F.); +#58884 = PLANE('',#58885); +#58885 = AXIS2_PLACEMENT_3D('',#58886,#58887,#58888); +#58886 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#58887 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#58888 = DIRECTION('',(0.,0.,1.)); +#58889 = ADVANCED_FACE('',(#58890),#58901,.F.); +#58890 = FACE_BOUND('',#58891,.F.); +#58891 = EDGE_LOOP('',(#58892,#58898,#58899,#58900)); +#58892 = ORIENTED_EDGE('',*,*,#58893,.T.); +#58893 = EDGE_CURVE('',#57956,#58065,#58894,.T.); +#58894 = LINE('',#58895,#58896); +#58895 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#58896 = VECTOR('',#58897,1.); +#58897 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58898 = ORIENTED_EDGE('',*,*,#58073,.T.); +#58899 = ORIENTED_EDGE('',*,*,#58876,.F.); +#58900 = ORIENTED_EDGE('',*,*,#57964,.F.); +#58901 = PLANE('',#58902); +#58902 = AXIS2_PLACEMENT_3D('',#58903,#58904,#58905); +#58903 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#58904 = DIRECTION('',(0.,0.,1.)); +#58905 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#58906 = ADVANCED_FACE('',(#58907),#58918,.T.); +#58907 = FACE_BOUND('',#58908,.T.); +#58908 = EDGE_LOOP('',(#58909,#58910,#58911,#58912)); +#58909 = ORIENTED_EDGE('',*,*,#57955,.T.); +#58910 = ORIENTED_EDGE('',*,*,#58893,.T.); +#58911 = ORIENTED_EDGE('',*,*,#58064,.F.); +#58912 = ORIENTED_EDGE('',*,*,#58913,.F.); +#58913 = EDGE_CURVE('',#57948,#58057,#58914,.T.); +#58914 = LINE('',#58915,#58916); +#58915 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583)); +#58916 = VECTOR('',#58917,1.); +#58917 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58918 = CYLINDRICAL_SURFACE('',#58919,0.25); +#58919 = AXIS2_PLACEMENT_3D('',#58920,#58921,#58922); +#58920 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#58921 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#58922 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#58923 = ADVANCED_FACE('',(#58924),#58930,.F.); +#58924 = FACE_BOUND('',#58925,.F.); +#58925 = EDGE_LOOP('',(#58926,#58927,#58928,#58929)); +#58926 = ORIENTED_EDGE('',*,*,#58038,.T.); +#58927 = ORIENTED_EDGE('',*,*,#58056,.T.); +#58928 = ORIENTED_EDGE('',*,*,#58913,.F.); +#58929 = ORIENTED_EDGE('',*,*,#57947,.F.); +#58930 = PLANE('',#58931); +#58931 = AXIS2_PLACEMENT_3D('',#58932,#58933,#58934); +#58932 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#58933 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012) + ); +#58934 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#58935 = ADVANCED_FACE('',(#58936),#58939,.F.); +#58936 = FACE_BOUND('',#58937,.T.); +#58937 = EDGE_LOOP('',(#58938)); +#58938 = ORIENTED_EDGE('',*,*,#58221,.F.); +#58939 = PLANE('',#58940); +#58940 = AXIS2_PLACEMENT_3D('',#58941,#58942,#58943); +#58941 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55)); +#58942 = DIRECTION('',(0.,0.,-1.)); +#58943 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#58944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#58948)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#58945,#58946,#58947)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#58945 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#58946 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#58947 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#58948 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#58945, + 'distance_accuracy_value','confusion accuracy'); +#58949 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#58950,#58952); +#58950 = ( REPRESENTATION_RELATIONSHIP('','',#55874,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#58951) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#58951 = ITEM_DEFINED_TRANSFORMATION('','',#11,#219); +#58952 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #58953); +#58953 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('52','U4','',#5,#55869,$); +#58954 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#55871)); +#58955 = SHAPE_DEFINITION_REPRESENTATION(#58956,#58962); +#58956 = PRODUCT_DEFINITION_SHAPE('','',#58957); +#58957 = PRODUCT_DEFINITION('design','',#58958,#58961); +#58958 = PRODUCT_DEFINITION_FORMATION('','',#58959); +#58959 = PRODUCT('SOT-23-6','SOT-23-6','',(#58960)); +#58960 = PRODUCT_CONTEXT('',#2,'mechanical'); +#58961 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#58962 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#58963),#62499); +#58963 = MANIFOLD_SOLID_BREP('',#58964); +#58964 = CLOSED_SHELL('',(#58965,#59003,#59066,#59089,#59118,#59141, + #59212,#59283,#59306,#59329,#59346,#59369,#59457,#59473,#59503, + #59534,#59565,#59596,#59627,#59658,#59675,#59692,#59723,#59754, + #59785,#59816,#59847,#59877,#59900,#59923,#59940,#59985,#60055, + #60078,#60101,#60124,#60195,#60233,#60282,#60374,#60399,#60483, + #60505,#60597,#60622,#60706,#60723,#60808,#60833,#60910,#60995, + #61020,#61097,#61114,#61206,#61231,#61315,#61337,#61429,#61454, + #61538,#61555,#61574,#61593,#61639,#61655,#61674,#61693,#61709, + #61726,#61738,#61755,#61772,#61789,#61806,#61823,#61840,#61857, + #61869,#61886,#61903,#61920,#61937,#61954,#61971,#61988,#62000, + #62017,#62034,#62051,#62068,#62085,#62102,#62114,#62131,#62148, + #62165,#62182,#62199,#62216,#62228,#62245,#62262,#62279,#62296, + #62313,#62330,#62347,#62359,#62376,#62393,#62410,#62427,#62444, + #62461,#62478,#62490)); +#58965 = ADVANCED_FACE('',(#58966),#58998,.F.); +#58966 = FACE_BOUND('',#58967,.F.); +#58967 = EDGE_LOOP('',(#58968,#58978,#58985,#58993)); +#58968 = ORIENTED_EDGE('',*,*,#58969,.T.); +#58969 = EDGE_CURVE('',#58970,#58972,#58974,.T.); +#58970 = VERTEX_POINT('',#58971); +#58971 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#58972 = VERTEX_POINT('',#58973); +#58973 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#58974 = LINE('',#58975,#58976); +#58975 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#58976 = VECTOR('',#58977,1.); +#58977 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58978 = ORIENTED_EDGE('',*,*,#58979,.T.); +#58979 = EDGE_CURVE('',#58972,#58980,#58982,.T.); +#58980 = VERTEX_POINT('',#58981); +#58981 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#58982 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#58983,#58984),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#58983 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#58984 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#58985 = ORIENTED_EDGE('',*,*,#58986,.F.); +#58986 = EDGE_CURVE('',#58987,#58980,#58989,.T.); +#58987 = VERTEX_POINT('',#58988); +#58988 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#58989 = LINE('',#58990,#58991); +#58990 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#58991 = VECTOR('',#58992,1.); +#58992 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#58993 = ORIENTED_EDGE('',*,*,#58994,.F.); +#58994 = EDGE_CURVE('',#58970,#58987,#58995,.T.); +#58995 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#58996,#58997),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#58996 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#58997 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#58998 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#58999,#59000) + ,(#59001,#59002 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#58999 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#59000 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#59001 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#59002 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#59003 = ADVANCED_FACE('',(#59004),#59061,.F.); +#59004 = FACE_BOUND('',#59005,.T.); +#59005 = EDGE_LOOP('',(#59006,#59007,#59015,#59023,#59031,#59039,#59047, + #59055)); +#59006 = ORIENTED_EDGE('',*,*,#58969,.T.); +#59007 = ORIENTED_EDGE('',*,*,#59008,.T.); +#59008 = EDGE_CURVE('',#58972,#59009,#59011,.T.); +#59009 = VERTEX_POINT('',#59010); +#59010 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#59011 = LINE('',#59012,#59013); +#59012 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#59013 = VECTOR('',#59014,1.); +#59014 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#59015 = ORIENTED_EDGE('',*,*,#59016,.T.); +#59016 = EDGE_CURVE('',#59009,#59017,#59019,.T.); +#59017 = VERTEX_POINT('',#59018); +#59018 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#59019 = LINE('',#59020,#59021); +#59020 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#59021 = VECTOR('',#59022,1.); +#59022 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59023 = ORIENTED_EDGE('',*,*,#59024,.T.); +#59024 = EDGE_CURVE('',#59017,#59025,#59027,.T.); +#59025 = VERTEX_POINT('',#59026); +#59026 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#59027 = LINE('',#59028,#59029); +#59028 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#59029 = VECTOR('',#59030,1.); +#59030 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#59031 = ORIENTED_EDGE('',*,*,#59032,.T.); +#59032 = EDGE_CURVE('',#59025,#59033,#59035,.T.); +#59033 = VERTEX_POINT('',#59034); +#59034 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#59035 = LINE('',#59036,#59037); +#59036 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#59037 = VECTOR('',#59038,1.); +#59038 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59039 = ORIENTED_EDGE('',*,*,#59040,.T.); +#59040 = EDGE_CURVE('',#59033,#59041,#59043,.T.); +#59041 = VERTEX_POINT('',#59042); +#59042 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#59043 = LINE('',#59044,#59045); +#59044 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#59045 = VECTOR('',#59046,1.); +#59046 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#59047 = ORIENTED_EDGE('',*,*,#59048,.T.); +#59048 = EDGE_CURVE('',#59041,#59049,#59051,.T.); +#59049 = VERTEX_POINT('',#59050); +#59050 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#59051 = LINE('',#59052,#59053); +#59052 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#59053 = VECTOR('',#59054,1.); +#59054 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59055 = ORIENTED_EDGE('',*,*,#59056,.T.); +#59056 = EDGE_CURVE('',#59049,#58970,#59057,.T.); +#59057 = LINE('',#59058,#59059); +#59058 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#59059 = VECTOR('',#59060,1.); +#59060 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#59061 = PLANE('',#59062); +#59062 = AXIS2_PLACEMENT_3D('',#59063,#59064,#59065); +#59063 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#59064 = DIRECTION('',(0.,0.,1.)); +#59065 = DIRECTION('',(0.436587433964,-0.899661832304,0.)); +#59066 = ADVANCED_FACE('',(#59067),#59084,.F.); +#59067 = FACE_BOUND('',#59068,.F.); +#59068 = EDGE_LOOP('',(#59069,#59070,#59077,#59083)); +#59069 = ORIENTED_EDGE('',*,*,#59008,.T.); +#59070 = ORIENTED_EDGE('',*,*,#59071,.T.); +#59071 = EDGE_CURVE('',#59009,#59072,#59074,.T.); +#59072 = VERTEX_POINT('',#59073); +#59073 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59074 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59075,#59076),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59075 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#59076 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59077 = ORIENTED_EDGE('',*,*,#59078,.F.); +#59078 = EDGE_CURVE('',#58980,#59072,#59079,.T.); +#59079 = LINE('',#59080,#59081); +#59080 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#59081 = VECTOR('',#59082,1.); +#59082 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#59083 = ORIENTED_EDGE('',*,*,#58979,.F.); +#59084 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#59085,#59086) + ,(#59087,#59088 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#59085 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#59086 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#59087 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#59088 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59089 = ADVANCED_FACE('',(#59090),#59113,.F.); +#59090 = FACE_BOUND('',#59091,.F.); +#59091 = EDGE_LOOP('',(#59092,#59093,#59100,#59108)); +#59092 = ORIENTED_EDGE('',*,*,#58986,.T.); +#59093 = ORIENTED_EDGE('',*,*,#59094,.T.); +#59094 = EDGE_CURVE('',#58980,#59095,#59097,.T.); +#59095 = VERTEX_POINT('',#59096); +#59096 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#59097 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59098,#59099),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59098 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#59099 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#59100 = ORIENTED_EDGE('',*,*,#59101,.F.); +#59101 = EDGE_CURVE('',#59102,#59095,#59104,.T.); +#59102 = VERTEX_POINT('',#59103); +#59103 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#59104 = LINE('',#59105,#59106); +#59105 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#59106 = VECTOR('',#59107,1.); +#59107 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59108 = ORIENTED_EDGE('',*,*,#59109,.F.); +#59109 = EDGE_CURVE('',#58987,#59102,#59110,.T.); +#59110 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59111,#59112),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59111 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#59112 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#59113 = PLANE('',#59114); +#59114 = AXIS2_PLACEMENT_3D('',#59115,#59116,#59117); +#59115 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#59116 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59117 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59118 = ADVANCED_FACE('',(#59119),#59136,.F.); +#59119 = FACE_BOUND('',#59120,.F.); +#59120 = EDGE_LOOP('',(#59121,#59122,#59123,#59131)); +#59121 = ORIENTED_EDGE('',*,*,#59056,.T.); +#59122 = ORIENTED_EDGE('',*,*,#58994,.T.); +#59123 = ORIENTED_EDGE('',*,*,#59124,.F.); +#59124 = EDGE_CURVE('',#59125,#58987,#59127,.T.); +#59125 = VERTEX_POINT('',#59126); +#59126 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#59127 = LINE('',#59128,#59129); +#59128 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#59129 = VECTOR('',#59130,1.); +#59130 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#59131 = ORIENTED_EDGE('',*,*,#59132,.F.); +#59132 = EDGE_CURVE('',#59049,#59125,#59133,.T.); +#59133 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59134,#59135),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59134 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#59135 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#59136 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#59137,#59138) + ,(#59139,#59140 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#59137 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#59138 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#59139 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#59140 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#59141 = ADVANCED_FACE('',(#59142),#59207,.F.); +#59142 = FACE_BOUND('',#59143,.F.); +#59143 = EDGE_LOOP('',(#59144,#59145,#59146,#59154,#59162,#59170,#59178, + #59186,#59194,#59202)); +#59144 = ORIENTED_EDGE('',*,*,#59048,.T.); +#59145 = ORIENTED_EDGE('',*,*,#59132,.T.); +#59146 = ORIENTED_EDGE('',*,*,#59147,.F.); +#59147 = EDGE_CURVE('',#59148,#59125,#59150,.T.); +#59148 = VERTEX_POINT('',#59149); +#59149 = CARTESIAN_POINT('',(-0.8,1.2,0.75)); +#59150 = LINE('',#59151,#59152); +#59151 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59152 = VECTOR('',#59153,1.); +#59153 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59154 = ORIENTED_EDGE('',*,*,#59155,.F.); +#59155 = EDGE_CURVE('',#59156,#59148,#59158,.T.); +#59156 = VERTEX_POINT('',#59157); +#59157 = CARTESIAN_POINT('',(-0.8,0.7,0.75)); +#59158 = LINE('',#59159,#59160); +#59159 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59160 = VECTOR('',#59161,1.); +#59161 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59162 = ORIENTED_EDGE('',*,*,#59163,.F.); +#59163 = EDGE_CURVE('',#59164,#59156,#59166,.T.); +#59164 = VERTEX_POINT('',#59165); +#59165 = CARTESIAN_POINT('',(-0.8,0.25,0.75)); +#59166 = LINE('',#59167,#59168); +#59167 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59168 = VECTOR('',#59169,1.); +#59169 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59170 = ORIENTED_EDGE('',*,*,#59171,.F.); +#59171 = EDGE_CURVE('',#59172,#59164,#59174,.T.); +#59172 = VERTEX_POINT('',#59173); +#59173 = CARTESIAN_POINT('',(-0.8,-0.25,0.75)); +#59174 = LINE('',#59175,#59176); +#59175 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59176 = VECTOR('',#59177,1.); +#59177 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59178 = ORIENTED_EDGE('',*,*,#59179,.F.); +#59179 = EDGE_CURVE('',#59180,#59172,#59182,.T.); +#59180 = VERTEX_POINT('',#59181); +#59181 = CARTESIAN_POINT('',(-0.8,-0.7,0.75)); +#59182 = LINE('',#59183,#59184); +#59183 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59184 = VECTOR('',#59185,1.); +#59185 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59186 = ORIENTED_EDGE('',*,*,#59187,.F.); +#59187 = EDGE_CURVE('',#59188,#59180,#59190,.T.); +#59188 = VERTEX_POINT('',#59189); +#59189 = CARTESIAN_POINT('',(-0.8,-1.2,0.75)); +#59190 = LINE('',#59191,#59192); +#59191 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59192 = VECTOR('',#59193,1.); +#59193 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59194 = ORIENTED_EDGE('',*,*,#59195,.F.); +#59195 = EDGE_CURVE('',#59196,#59188,#59198,.T.); +#59196 = VERTEX_POINT('',#59197); +#59197 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59198 = LINE('',#59199,#59200); +#59199 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59200 = VECTOR('',#59201,1.); +#59201 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59202 = ORIENTED_EDGE('',*,*,#59203,.F.); +#59203 = EDGE_CURVE('',#59041,#59196,#59204,.T.); +#59204 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59205,#59206),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59205 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#59206 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59207 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#59208,#59209) + ,(#59210,#59211 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#59208 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#59209 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59210 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#59211 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#59212 = ADVANCED_FACE('',(#59213),#59278,.F.); +#59213 = FACE_BOUND('',#59214,.F.); +#59214 = EDGE_LOOP('',(#59215,#59216,#59223,#59231,#59239,#59247,#59255, + #59263,#59271,#59277)); +#59215 = ORIENTED_EDGE('',*,*,#59016,.T.); +#59216 = ORIENTED_EDGE('',*,*,#59217,.T.); +#59217 = EDGE_CURVE('',#59017,#59218,#59220,.T.); +#59218 = VERTEX_POINT('',#59219); +#59219 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#59220 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59221,#59222),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59221 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#59222 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#59223 = ORIENTED_EDGE('',*,*,#59224,.F.); +#59224 = EDGE_CURVE('',#59225,#59218,#59227,.T.); +#59225 = VERTEX_POINT('',#59226); +#59226 = CARTESIAN_POINT('',(0.8,-1.2,0.75)); +#59227 = LINE('',#59228,#59229); +#59228 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59229 = VECTOR('',#59230,1.); +#59230 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59231 = ORIENTED_EDGE('',*,*,#59232,.F.); +#59232 = EDGE_CURVE('',#59233,#59225,#59235,.T.); +#59233 = VERTEX_POINT('',#59234); +#59234 = CARTESIAN_POINT('',(0.8,-0.7,0.75)); +#59235 = LINE('',#59236,#59237); +#59236 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59237 = VECTOR('',#59238,1.); +#59238 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59239 = ORIENTED_EDGE('',*,*,#59240,.F.); +#59240 = EDGE_CURVE('',#59241,#59233,#59243,.T.); +#59241 = VERTEX_POINT('',#59242); +#59242 = CARTESIAN_POINT('',(0.8,-0.25,0.75)); +#59243 = LINE('',#59244,#59245); +#59244 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59245 = VECTOR('',#59246,1.); +#59246 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59247 = ORIENTED_EDGE('',*,*,#59248,.F.); +#59248 = EDGE_CURVE('',#59249,#59241,#59251,.T.); +#59249 = VERTEX_POINT('',#59250); +#59250 = CARTESIAN_POINT('',(0.8,0.25,0.75)); +#59251 = LINE('',#59252,#59253); +#59252 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59253 = VECTOR('',#59254,1.); +#59254 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59255 = ORIENTED_EDGE('',*,*,#59256,.F.); +#59256 = EDGE_CURVE('',#59257,#59249,#59259,.T.); +#59257 = VERTEX_POINT('',#59258); +#59258 = CARTESIAN_POINT('',(0.8,0.7,0.75)); +#59259 = LINE('',#59260,#59261); +#59260 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59261 = VECTOR('',#59262,1.); +#59262 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59263 = ORIENTED_EDGE('',*,*,#59264,.F.); +#59264 = EDGE_CURVE('',#59265,#59257,#59267,.T.); +#59265 = VERTEX_POINT('',#59266); +#59266 = CARTESIAN_POINT('',(0.8,1.2,0.75)); +#59267 = LINE('',#59268,#59269); +#59268 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59269 = VECTOR('',#59270,1.); +#59270 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59271 = ORIENTED_EDGE('',*,*,#59272,.F.); +#59272 = EDGE_CURVE('',#59072,#59265,#59273,.T.); +#59273 = LINE('',#59274,#59275); +#59274 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59275 = VECTOR('',#59276,1.); +#59276 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59277 = ORIENTED_EDGE('',*,*,#59071,.F.); +#59278 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#59279,#59280) + ,(#59281,#59282 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#59279 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#59280 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59281 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#59282 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#59283 = ADVANCED_FACE('',(#59284),#59301,.F.); +#59284 = FACE_BOUND('',#59285,.F.); +#59285 = EDGE_LOOP('',(#59286,#59287,#59288,#59296)); +#59286 = ORIENTED_EDGE('',*,*,#59040,.T.); +#59287 = ORIENTED_EDGE('',*,*,#59203,.T.); +#59288 = ORIENTED_EDGE('',*,*,#59289,.F.); +#59289 = EDGE_CURVE('',#59290,#59196,#59292,.T.); +#59290 = VERTEX_POINT('',#59291); +#59291 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#59292 = LINE('',#59293,#59294); +#59293 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#59294 = VECTOR('',#59295,1.); +#59295 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#59296 = ORIENTED_EDGE('',*,*,#59297,.F.); +#59297 = EDGE_CURVE('',#59033,#59290,#59298,.T.); +#59298 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59299,#59300),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59299 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#59300 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#59301 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#59302,#59303) + ,(#59304,#59305 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#59302 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#59303 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#59304 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#59305 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59306 = ADVANCED_FACE('',(#59307),#59324,.F.); +#59307 = FACE_BOUND('',#59308,.F.); +#59308 = EDGE_LOOP('',(#59309,#59310,#59317,#59323)); +#59309 = ORIENTED_EDGE('',*,*,#59024,.T.); +#59310 = ORIENTED_EDGE('',*,*,#59311,.T.); +#59311 = EDGE_CURVE('',#59025,#59312,#59314,.T.); +#59312 = VERTEX_POINT('',#59313); +#59313 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#59314 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59315,#59316),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59315 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#59316 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#59317 = ORIENTED_EDGE('',*,*,#59318,.F.); +#59318 = EDGE_CURVE('',#59218,#59312,#59319,.T.); +#59319 = LINE('',#59320,#59321); +#59320 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#59321 = VECTOR('',#59322,1.); +#59322 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#59323 = ORIENTED_EDGE('',*,*,#59217,.F.); +#59324 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#59325,#59326) + ,(#59327,#59328 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#59325 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#59326 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#59327 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#59328 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#59329 = ADVANCED_FACE('',(#59330),#59341,.F.); +#59330 = FACE_BOUND('',#59331,.F.); +#59331 = EDGE_LOOP('',(#59332,#59333,#59334,#59340)); +#59332 = ORIENTED_EDGE('',*,*,#59032,.T.); +#59333 = ORIENTED_EDGE('',*,*,#59297,.T.); +#59334 = ORIENTED_EDGE('',*,*,#59335,.F.); +#59335 = EDGE_CURVE('',#59312,#59290,#59336,.T.); +#59336 = LINE('',#59337,#59338); +#59337 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#59338 = VECTOR('',#59339,1.); +#59339 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59340 = ORIENTED_EDGE('',*,*,#59311,.F.); +#59341 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#59342,#59343) + ,(#59344,#59345 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#59342 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#59343 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#59344 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#59345 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#59346 = ADVANCED_FACE('',(#59347),#59364,.F.); +#59347 = FACE_BOUND('',#59348,.F.); +#59348 = EDGE_LOOP('',(#59349,#59350,#59357,#59363)); +#59349 = ORIENTED_EDGE('',*,*,#59078,.T.); +#59350 = ORIENTED_EDGE('',*,*,#59351,.T.); +#59351 = EDGE_CURVE('',#59072,#59352,#59354,.T.); +#59352 = VERTEX_POINT('',#59353); +#59353 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59354 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59355,#59356),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59355 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#59356 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59357 = ORIENTED_EDGE('',*,*,#59358,.F.); +#59358 = EDGE_CURVE('',#59095,#59352,#59359,.T.); +#59359 = LINE('',#59360,#59361); +#59360 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#59361 = VECTOR('',#59362,1.); +#59362 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#59363 = ORIENTED_EDGE('',*,*,#59094,.F.); +#59364 = PLANE('',#59365); +#59365 = AXIS2_PLACEMENT_3D('',#59366,#59367,#59368); +#59366 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#59367 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#59368 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#59369 = ADVANCED_FACE('',(#59370),#59452,.F.); +#59370 = FACE_BOUND('',#59371,.F.); +#59371 = EDGE_LOOP('',(#59372,#59380,#59381,#59382,#59390,#59398,#59406, + #59414,#59422,#59430,#59438,#59446)); +#59372 = ORIENTED_EDGE('',*,*,#59373,.T.); +#59373 = EDGE_CURVE('',#59374,#59102,#59376,.T.); +#59374 = VERTEX_POINT('',#59375); +#59375 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#59376 = LINE('',#59377,#59378); +#59377 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#59378 = VECTOR('',#59379,1.); +#59379 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#59380 = ORIENTED_EDGE('',*,*,#59101,.T.); +#59381 = ORIENTED_EDGE('',*,*,#59358,.T.); +#59382 = ORIENTED_EDGE('',*,*,#59383,.T.); +#59383 = EDGE_CURVE('',#59352,#59384,#59386,.T.); +#59384 = VERTEX_POINT('',#59385); +#59385 = CARTESIAN_POINT('',(0.8,1.2,0.9)); +#59386 = LINE('',#59387,#59388); +#59387 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59388 = VECTOR('',#59389,1.); +#59389 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59390 = ORIENTED_EDGE('',*,*,#59391,.T.); +#59391 = EDGE_CURVE('',#59384,#59392,#59394,.T.); +#59392 = VERTEX_POINT('',#59393); +#59393 = CARTESIAN_POINT('',(0.775,1.2,0.9)); +#59394 = LINE('',#59395,#59396); +#59395 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#59396 = VECTOR('',#59397,1.); +#59397 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59398 = ORIENTED_EDGE('',*,*,#59399,.F.); +#59399 = EDGE_CURVE('',#59400,#59392,#59402,.T.); +#59400 = VERTEX_POINT('',#59401); +#59401 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#59402 = LINE('',#59403,#59404); +#59403 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#59404 = VECTOR('',#59405,1.); +#59405 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59406 = ORIENTED_EDGE('',*,*,#59407,.F.); +#59407 = EDGE_CURVE('',#59408,#59400,#59410,.T.); +#59408 = VERTEX_POINT('',#59409); +#59409 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#59410 = LINE('',#59411,#59412); +#59411 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#59412 = VECTOR('',#59413,1.); +#59413 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#59414 = ORIENTED_EDGE('',*,*,#59415,.F.); +#59415 = EDGE_CURVE('',#59416,#59408,#59418,.T.); +#59416 = VERTEX_POINT('',#59417); +#59417 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#59418 = LINE('',#59419,#59420); +#59419 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#59420 = VECTOR('',#59421,1.); +#59421 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59422 = ORIENTED_EDGE('',*,*,#59423,.F.); +#59423 = EDGE_CURVE('',#59424,#59416,#59426,.T.); +#59424 = VERTEX_POINT('',#59425); +#59425 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#59426 = LINE('',#59427,#59428); +#59427 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#59428 = VECTOR('',#59429,1.); +#59429 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#59430 = ORIENTED_EDGE('',*,*,#59431,.F.); +#59431 = EDGE_CURVE('',#59432,#59424,#59434,.T.); +#59432 = VERTEX_POINT('',#59433); +#59433 = CARTESIAN_POINT('',(-0.775,1.2,0.9)); +#59434 = LINE('',#59435,#59436); +#59435 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#59436 = VECTOR('',#59437,1.); +#59437 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59438 = ORIENTED_EDGE('',*,*,#59439,.F.); +#59439 = EDGE_CURVE('',#59440,#59432,#59442,.T.); +#59440 = VERTEX_POINT('',#59441); +#59441 = CARTESIAN_POINT('',(-0.8,1.2,0.9)); +#59442 = LINE('',#59443,#59444); +#59443 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#59444 = VECTOR('',#59445,1.); +#59445 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#59446 = ORIENTED_EDGE('',*,*,#59447,.T.); +#59447 = EDGE_CURVE('',#59440,#59374,#59448,.T.); +#59448 = LINE('',#59449,#59450); +#59449 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59450 = VECTOR('',#59451,1.); +#59451 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59452 = PLANE('',#59453); +#59453 = AXIS2_PLACEMENT_3D('',#59454,#59455,#59456); +#59454 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#59455 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#59456 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#59457 = ADVANCED_FACE('',(#59458),#59468,.F.); +#59458 = FACE_BOUND('',#59459,.F.); +#59459 = EDGE_LOOP('',(#59460,#59461,#59462,#59463)); +#59460 = ORIENTED_EDGE('',*,*,#59124,.T.); +#59461 = ORIENTED_EDGE('',*,*,#59109,.T.); +#59462 = ORIENTED_EDGE('',*,*,#59373,.F.); +#59463 = ORIENTED_EDGE('',*,*,#59464,.F.); +#59464 = EDGE_CURVE('',#59125,#59374,#59465,.T.); +#59465 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59466,#59467),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59466 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#59467 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#59468 = PLANE('',#59469); +#59469 = AXIS2_PLACEMENT_3D('',#59470,#59471,#59472); +#59470 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#59471 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#59472 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#59473 = ADVANCED_FACE('',(#59474),#59498,.F.); +#59474 = FACE_BOUND('',#59475,.F.); +#59475 = EDGE_LOOP('',(#59476,#59483,#59484,#59492)); +#59476 = ORIENTED_EDGE('',*,*,#59477,.F.); +#59477 = EDGE_CURVE('',#59196,#59478,#59480,.T.); +#59478 = VERTEX_POINT('',#59479); +#59479 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59480 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59481,#59482),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59481 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#59482 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59483 = ORIENTED_EDGE('',*,*,#59195,.T.); +#59484 = ORIENTED_EDGE('',*,*,#59485,.T.); +#59485 = EDGE_CURVE('',#59188,#59486,#59488,.T.); +#59486 = VERTEX_POINT('',#59487); +#59487 = CARTESIAN_POINT('',(-0.8,-1.2,0.9)); +#59488 = LINE('',#59489,#59490); +#59489 = CARTESIAN_POINT('',(-0.8,-1.2,0.670847817658)); +#59490 = VECTOR('',#59491,1.); +#59491 = DIRECTION('',(0.,0.,1.)); +#59492 = ORIENTED_EDGE('',*,*,#59493,.F.); +#59493 = EDGE_CURVE('',#59478,#59486,#59494,.T.); +#59494 = LINE('',#59495,#59496); +#59495 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59496 = VECTOR('',#59497,1.); +#59497 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59498 = PLANE('',#59499); +#59499 = AXIS2_PLACEMENT_3D('',#59500,#59501,#59502); +#59500 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59501 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59502 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59503 = ADVANCED_FACE('',(#59504),#59529,.F.); +#59504 = FACE_BOUND('',#59505,.F.); +#59505 = EDGE_LOOP('',(#59506,#59514,#59515,#59523)); +#59506 = ORIENTED_EDGE('',*,*,#59507,.F.); +#59507 = EDGE_CURVE('',#59188,#59508,#59510,.T.); +#59508 = VERTEX_POINT('',#59509); +#59509 = CARTESIAN_POINT('',(-0.85,-1.2,0.75)); +#59510 = LINE('',#59511,#59512); +#59511 = CARTESIAN_POINT('',(-0.75,-1.2,0.75)); +#59512 = VECTOR('',#59513,1.); +#59513 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59514 = ORIENTED_EDGE('',*,*,#59187,.T.); +#59515 = ORIENTED_EDGE('',*,*,#59516,.T.); +#59516 = EDGE_CURVE('',#59180,#59517,#59519,.T.); +#59517 = VERTEX_POINT('',#59518); +#59518 = CARTESIAN_POINT('',(-0.85,-0.7,0.75)); +#59519 = LINE('',#59520,#59521); +#59520 = CARTESIAN_POINT('',(-0.75,-0.7,0.75)); +#59521 = VECTOR('',#59522,1.); +#59522 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59523 = ORIENTED_EDGE('',*,*,#59524,.F.); +#59524 = EDGE_CURVE('',#59508,#59517,#59525,.T.); +#59525 = LINE('',#59526,#59527); +#59526 = CARTESIAN_POINT('',(-0.85,-1.2,0.75)); +#59527 = VECTOR('',#59528,1.); +#59528 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#59529 = PLANE('',#59530); +#59530 = AXIS2_PLACEMENT_3D('',#59531,#59532,#59533); +#59531 = CARTESIAN_POINT('',(-0.75,-1.2,0.75)); +#59532 = DIRECTION('',(0.,0.,1.)); +#59533 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59534 = ADVANCED_FACE('',(#59535),#59560,.F.); +#59535 = FACE_BOUND('',#59536,.F.); +#59536 = EDGE_LOOP('',(#59537,#59545,#59546,#59554)); +#59537 = ORIENTED_EDGE('',*,*,#59538,.F.); +#59538 = EDGE_CURVE('',#59180,#59539,#59541,.T.); +#59539 = VERTEX_POINT('',#59540); +#59540 = CARTESIAN_POINT('',(-0.8,-0.7,0.9)); +#59541 = LINE('',#59542,#59543); +#59542 = CARTESIAN_POINT('',(-0.8,-0.7,0.670847817658)); +#59543 = VECTOR('',#59544,1.); +#59544 = DIRECTION('',(0.,0.,1.)); +#59545 = ORIENTED_EDGE('',*,*,#59179,.T.); +#59546 = ORIENTED_EDGE('',*,*,#59547,.T.); +#59547 = EDGE_CURVE('',#59172,#59548,#59550,.T.); +#59548 = VERTEX_POINT('',#59549); +#59549 = CARTESIAN_POINT('',(-0.8,-0.25,0.9)); +#59550 = LINE('',#59551,#59552); +#59551 = CARTESIAN_POINT('',(-0.8,-0.25,0.670847817658)); +#59552 = VECTOR('',#59553,1.); +#59553 = DIRECTION('',(0.,0.,1.)); +#59554 = ORIENTED_EDGE('',*,*,#59555,.F.); +#59555 = EDGE_CURVE('',#59539,#59548,#59556,.T.); +#59556 = LINE('',#59557,#59558); +#59557 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59558 = VECTOR('',#59559,1.); +#59559 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59560 = PLANE('',#59561); +#59561 = AXIS2_PLACEMENT_3D('',#59562,#59563,#59564); +#59562 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59563 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59564 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59565 = ADVANCED_FACE('',(#59566),#59591,.F.); +#59566 = FACE_BOUND('',#59567,.F.); +#59567 = EDGE_LOOP('',(#59568,#59576,#59577,#59585)); +#59568 = ORIENTED_EDGE('',*,*,#59569,.F.); +#59569 = EDGE_CURVE('',#59172,#59570,#59572,.T.); +#59570 = VERTEX_POINT('',#59571); +#59571 = CARTESIAN_POINT('',(-0.85,-0.25,0.75)); +#59572 = LINE('',#59573,#59574); +#59573 = CARTESIAN_POINT('',(-0.75,-0.25,0.75)); +#59574 = VECTOR('',#59575,1.); +#59575 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59576 = ORIENTED_EDGE('',*,*,#59171,.T.); +#59577 = ORIENTED_EDGE('',*,*,#59578,.T.); +#59578 = EDGE_CURVE('',#59164,#59579,#59581,.T.); +#59579 = VERTEX_POINT('',#59580); +#59580 = CARTESIAN_POINT('',(-0.85,0.25,0.75)); +#59581 = LINE('',#59582,#59583); +#59582 = CARTESIAN_POINT('',(-0.75,0.25,0.75)); +#59583 = VECTOR('',#59584,1.); +#59584 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59585 = ORIENTED_EDGE('',*,*,#59586,.F.); +#59586 = EDGE_CURVE('',#59570,#59579,#59587,.T.); +#59587 = LINE('',#59588,#59589); +#59588 = CARTESIAN_POINT('',(-0.85,-0.25,0.75)); +#59589 = VECTOR('',#59590,1.); +#59590 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#59591 = PLANE('',#59592); +#59592 = AXIS2_PLACEMENT_3D('',#59593,#59594,#59595); +#59593 = CARTESIAN_POINT('',(-0.75,-0.25,0.75)); +#59594 = DIRECTION('',(0.,0.,1.)); +#59595 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59596 = ADVANCED_FACE('',(#59597),#59622,.F.); +#59597 = FACE_BOUND('',#59598,.F.); +#59598 = EDGE_LOOP('',(#59599,#59607,#59608,#59616)); +#59599 = ORIENTED_EDGE('',*,*,#59600,.F.); +#59600 = EDGE_CURVE('',#59164,#59601,#59603,.T.); +#59601 = VERTEX_POINT('',#59602); +#59602 = CARTESIAN_POINT('',(-0.8,0.25,0.9)); +#59603 = LINE('',#59604,#59605); +#59604 = CARTESIAN_POINT('',(-0.8,0.25,0.670847817658)); +#59605 = VECTOR('',#59606,1.); +#59606 = DIRECTION('',(0.,0.,1.)); +#59607 = ORIENTED_EDGE('',*,*,#59163,.T.); +#59608 = ORIENTED_EDGE('',*,*,#59609,.T.); +#59609 = EDGE_CURVE('',#59156,#59610,#59612,.T.); +#59610 = VERTEX_POINT('',#59611); +#59611 = CARTESIAN_POINT('',(-0.8,0.7,0.9)); +#59612 = LINE('',#59613,#59614); +#59613 = CARTESIAN_POINT('',(-0.8,0.7,0.670847817658)); +#59614 = VECTOR('',#59615,1.); +#59615 = DIRECTION('',(0.,0.,1.)); +#59616 = ORIENTED_EDGE('',*,*,#59617,.F.); +#59617 = EDGE_CURVE('',#59601,#59610,#59618,.T.); +#59618 = LINE('',#59619,#59620); +#59619 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59620 = VECTOR('',#59621,1.); +#59621 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59622 = PLANE('',#59623); +#59623 = AXIS2_PLACEMENT_3D('',#59624,#59625,#59626); +#59624 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59625 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59626 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59627 = ADVANCED_FACE('',(#59628),#59653,.F.); +#59628 = FACE_BOUND('',#59629,.F.); +#59629 = EDGE_LOOP('',(#59630,#59638,#59639,#59647)); +#59630 = ORIENTED_EDGE('',*,*,#59631,.F.); +#59631 = EDGE_CURVE('',#59156,#59632,#59634,.T.); +#59632 = VERTEX_POINT('',#59633); +#59633 = CARTESIAN_POINT('',(-0.85,0.7,0.75)); +#59634 = LINE('',#59635,#59636); +#59635 = CARTESIAN_POINT('',(-0.75,0.7,0.75)); +#59636 = VECTOR('',#59637,1.); +#59637 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59638 = ORIENTED_EDGE('',*,*,#59155,.T.); +#59639 = ORIENTED_EDGE('',*,*,#59640,.T.); +#59640 = EDGE_CURVE('',#59148,#59641,#59643,.T.); +#59641 = VERTEX_POINT('',#59642); +#59642 = CARTESIAN_POINT('',(-0.85,1.2,0.75)); +#59643 = LINE('',#59644,#59645); +#59644 = CARTESIAN_POINT('',(-0.75,1.2,0.75)); +#59645 = VECTOR('',#59646,1.); +#59646 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59647 = ORIENTED_EDGE('',*,*,#59648,.F.); +#59648 = EDGE_CURVE('',#59632,#59641,#59649,.T.); +#59649 = LINE('',#59650,#59651); +#59650 = CARTESIAN_POINT('',(-0.85,0.7,0.75)); +#59651 = VECTOR('',#59652,1.); +#59652 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#59653 = PLANE('',#59654); +#59654 = AXIS2_PLACEMENT_3D('',#59655,#59656,#59657); +#59655 = CARTESIAN_POINT('',(-0.75,0.7,0.75)); +#59656 = DIRECTION('',(0.,0.,1.)); +#59657 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#59658 = ADVANCED_FACE('',(#59659),#59670,.F.); +#59659 = FACE_BOUND('',#59660,.F.); +#59660 = EDGE_LOOP('',(#59661,#59667,#59668,#59669)); +#59661 = ORIENTED_EDGE('',*,*,#59662,.F.); +#59662 = EDGE_CURVE('',#59148,#59440,#59663,.T.); +#59663 = LINE('',#59664,#59665); +#59664 = CARTESIAN_POINT('',(-0.8,1.2,0.670847817658)); +#59665 = VECTOR('',#59666,1.); +#59666 = DIRECTION('',(0.,0.,1.)); +#59667 = ORIENTED_EDGE('',*,*,#59147,.T.); +#59668 = ORIENTED_EDGE('',*,*,#59464,.T.); +#59669 = ORIENTED_EDGE('',*,*,#59447,.F.); +#59670 = PLANE('',#59671); +#59671 = AXIS2_PLACEMENT_3D('',#59672,#59673,#59674); +#59672 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#59673 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59674 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59675 = ADVANCED_FACE('',(#59676),#59687,.F.); +#59676 = FACE_BOUND('',#59677,.F.); +#59677 = EDGE_LOOP('',(#59678,#59679,#59680,#59686)); +#59678 = ORIENTED_EDGE('',*,*,#59351,.F.); +#59679 = ORIENTED_EDGE('',*,*,#59272,.T.); +#59680 = ORIENTED_EDGE('',*,*,#59681,.T.); +#59681 = EDGE_CURVE('',#59265,#59384,#59682,.T.); +#59682 = LINE('',#59683,#59684); +#59683 = CARTESIAN_POINT('',(0.8,1.2,0.670847817658)); +#59684 = VECTOR('',#59685,1.); +#59685 = DIRECTION('',(0.,0.,1.)); +#59686 = ORIENTED_EDGE('',*,*,#59383,.F.); +#59687 = PLANE('',#59688); +#59688 = AXIS2_PLACEMENT_3D('',#59689,#59690,#59691); +#59689 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59690 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59691 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59692 = ADVANCED_FACE('',(#59693),#59718,.F.); +#59693 = FACE_BOUND('',#59694,.F.); +#59694 = EDGE_LOOP('',(#59695,#59703,#59704,#59712)); +#59695 = ORIENTED_EDGE('',*,*,#59696,.F.); +#59696 = EDGE_CURVE('',#59265,#59697,#59699,.T.); +#59697 = VERTEX_POINT('',#59698); +#59698 = CARTESIAN_POINT('',(0.85,1.2,0.75)); +#59699 = LINE('',#59700,#59701); +#59700 = CARTESIAN_POINT('',(0.75,1.2,0.75)); +#59701 = VECTOR('',#59702,1.); +#59702 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59703 = ORIENTED_EDGE('',*,*,#59264,.T.); +#59704 = ORIENTED_EDGE('',*,*,#59705,.T.); +#59705 = EDGE_CURVE('',#59257,#59706,#59708,.T.); +#59706 = VERTEX_POINT('',#59707); +#59707 = CARTESIAN_POINT('',(0.85,0.7,0.75)); +#59708 = LINE('',#59709,#59710); +#59709 = CARTESIAN_POINT('',(0.75,0.7,0.75)); +#59710 = VECTOR('',#59711,1.); +#59711 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59712 = ORIENTED_EDGE('',*,*,#59713,.F.); +#59713 = EDGE_CURVE('',#59697,#59706,#59714,.T.); +#59714 = LINE('',#59715,#59716); +#59715 = CARTESIAN_POINT('',(0.85,1.2,0.75)); +#59716 = VECTOR('',#59717,1.); +#59717 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59718 = PLANE('',#59719); +#59719 = AXIS2_PLACEMENT_3D('',#59720,#59721,#59722); +#59720 = CARTESIAN_POINT('',(0.75,1.2,0.75)); +#59721 = DIRECTION('',(0.,0.,1.)); +#59722 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#59723 = ADVANCED_FACE('',(#59724),#59749,.F.); +#59724 = FACE_BOUND('',#59725,.F.); +#59725 = EDGE_LOOP('',(#59726,#59734,#59735,#59743)); +#59726 = ORIENTED_EDGE('',*,*,#59727,.F.); +#59727 = EDGE_CURVE('',#59257,#59728,#59730,.T.); +#59728 = VERTEX_POINT('',#59729); +#59729 = CARTESIAN_POINT('',(0.8,0.7,0.9)); +#59730 = LINE('',#59731,#59732); +#59731 = CARTESIAN_POINT('',(0.8,0.7,0.670847817658)); +#59732 = VECTOR('',#59733,1.); +#59733 = DIRECTION('',(0.,0.,1.)); +#59734 = ORIENTED_EDGE('',*,*,#59256,.T.); +#59735 = ORIENTED_EDGE('',*,*,#59736,.T.); +#59736 = EDGE_CURVE('',#59249,#59737,#59739,.T.); +#59737 = VERTEX_POINT('',#59738); +#59738 = CARTESIAN_POINT('',(0.8,0.25,0.9)); +#59739 = LINE('',#59740,#59741); +#59740 = CARTESIAN_POINT('',(0.8,0.25,0.670847817658)); +#59741 = VECTOR('',#59742,1.); +#59742 = DIRECTION('',(0.,0.,1.)); +#59743 = ORIENTED_EDGE('',*,*,#59744,.F.); +#59744 = EDGE_CURVE('',#59728,#59737,#59745,.T.); +#59745 = LINE('',#59746,#59747); +#59746 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59747 = VECTOR('',#59748,1.); +#59748 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59749 = PLANE('',#59750); +#59750 = AXIS2_PLACEMENT_3D('',#59751,#59752,#59753); +#59751 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59752 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59753 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59754 = ADVANCED_FACE('',(#59755),#59780,.F.); +#59755 = FACE_BOUND('',#59756,.F.); +#59756 = EDGE_LOOP('',(#59757,#59765,#59766,#59774)); +#59757 = ORIENTED_EDGE('',*,*,#59758,.F.); +#59758 = EDGE_CURVE('',#59249,#59759,#59761,.T.); +#59759 = VERTEX_POINT('',#59760); +#59760 = CARTESIAN_POINT('',(0.85,0.25,0.75)); +#59761 = LINE('',#59762,#59763); +#59762 = CARTESIAN_POINT('',(0.75,0.25,0.75)); +#59763 = VECTOR('',#59764,1.); +#59764 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59765 = ORIENTED_EDGE('',*,*,#59248,.T.); +#59766 = ORIENTED_EDGE('',*,*,#59767,.T.); +#59767 = EDGE_CURVE('',#59241,#59768,#59770,.T.); +#59768 = VERTEX_POINT('',#59769); +#59769 = CARTESIAN_POINT('',(0.85,-0.25,0.75)); +#59770 = LINE('',#59771,#59772); +#59771 = CARTESIAN_POINT('',(0.75,-0.25,0.75)); +#59772 = VECTOR('',#59773,1.); +#59773 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59774 = ORIENTED_EDGE('',*,*,#59775,.F.); +#59775 = EDGE_CURVE('',#59759,#59768,#59776,.T.); +#59776 = LINE('',#59777,#59778); +#59777 = CARTESIAN_POINT('',(0.85,0.25,0.75)); +#59778 = VECTOR('',#59779,1.); +#59779 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59780 = PLANE('',#59781); +#59781 = AXIS2_PLACEMENT_3D('',#59782,#59783,#59784); +#59782 = CARTESIAN_POINT('',(0.75,0.25,0.75)); +#59783 = DIRECTION('',(0.,0.,1.)); +#59784 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#59785 = ADVANCED_FACE('',(#59786),#59811,.F.); +#59786 = FACE_BOUND('',#59787,.F.); +#59787 = EDGE_LOOP('',(#59788,#59796,#59797,#59805)); +#59788 = ORIENTED_EDGE('',*,*,#59789,.F.); +#59789 = EDGE_CURVE('',#59241,#59790,#59792,.T.); +#59790 = VERTEX_POINT('',#59791); +#59791 = CARTESIAN_POINT('',(0.8,-0.25,0.9)); +#59792 = LINE('',#59793,#59794); +#59793 = CARTESIAN_POINT('',(0.8,-0.25,0.670847817658)); +#59794 = VECTOR('',#59795,1.); +#59795 = DIRECTION('',(0.,0.,1.)); +#59796 = ORIENTED_EDGE('',*,*,#59240,.T.); +#59797 = ORIENTED_EDGE('',*,*,#59798,.T.); +#59798 = EDGE_CURVE('',#59233,#59799,#59801,.T.); +#59799 = VERTEX_POINT('',#59800); +#59800 = CARTESIAN_POINT('',(0.8,-0.7,0.9)); +#59801 = LINE('',#59802,#59803); +#59802 = CARTESIAN_POINT('',(0.8,-0.7,0.670847817658)); +#59803 = VECTOR('',#59804,1.); +#59804 = DIRECTION('',(0.,0.,1.)); +#59805 = ORIENTED_EDGE('',*,*,#59806,.F.); +#59806 = EDGE_CURVE('',#59790,#59799,#59807,.T.); +#59807 = LINE('',#59808,#59809); +#59808 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59809 = VECTOR('',#59810,1.); +#59810 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59811 = PLANE('',#59812); +#59812 = AXIS2_PLACEMENT_3D('',#59813,#59814,#59815); +#59813 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59814 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59815 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59816 = ADVANCED_FACE('',(#59817),#59842,.F.); +#59817 = FACE_BOUND('',#59818,.F.); +#59818 = EDGE_LOOP('',(#59819,#59827,#59828,#59836)); +#59819 = ORIENTED_EDGE('',*,*,#59820,.F.); +#59820 = EDGE_CURVE('',#59233,#59821,#59823,.T.); +#59821 = VERTEX_POINT('',#59822); +#59822 = CARTESIAN_POINT('',(0.85,-0.7,0.75)); +#59823 = LINE('',#59824,#59825); +#59824 = CARTESIAN_POINT('',(0.75,-0.7,0.75)); +#59825 = VECTOR('',#59826,1.); +#59826 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59827 = ORIENTED_EDGE('',*,*,#59232,.T.); +#59828 = ORIENTED_EDGE('',*,*,#59829,.T.); +#59829 = EDGE_CURVE('',#59225,#59830,#59832,.T.); +#59830 = VERTEX_POINT('',#59831); +#59831 = CARTESIAN_POINT('',(0.85,-1.2,0.75)); +#59832 = LINE('',#59833,#59834); +#59833 = CARTESIAN_POINT('',(0.75,-1.2,0.75)); +#59834 = VECTOR('',#59835,1.); +#59835 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#59836 = ORIENTED_EDGE('',*,*,#59837,.F.); +#59837 = EDGE_CURVE('',#59821,#59830,#59838,.T.); +#59838 = LINE('',#59839,#59840); +#59839 = CARTESIAN_POINT('',(0.85,-0.7,0.75)); +#59840 = VECTOR('',#59841,1.); +#59841 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59842 = PLANE('',#59843); +#59843 = AXIS2_PLACEMENT_3D('',#59844,#59845,#59846); +#59844 = CARTESIAN_POINT('',(0.75,-0.7,0.75)); +#59845 = DIRECTION('',(0.,0.,1.)); +#59846 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#59847 = ADVANCED_FACE('',(#59848),#59872,.F.); +#59848 = FACE_BOUND('',#59849,.F.); +#59849 = EDGE_LOOP('',(#59850,#59858,#59859,#59866)); +#59850 = ORIENTED_EDGE('',*,*,#59851,.F.); +#59851 = EDGE_CURVE('',#59225,#59852,#59854,.T.); +#59852 = VERTEX_POINT('',#59853); +#59853 = CARTESIAN_POINT('',(0.8,-1.2,0.9)); +#59854 = LINE('',#59855,#59856); +#59855 = CARTESIAN_POINT('',(0.8,-1.2,0.670847817658)); +#59856 = VECTOR('',#59857,1.); +#59857 = DIRECTION('',(0.,0.,1.)); +#59858 = ORIENTED_EDGE('',*,*,#59224,.T.); +#59859 = ORIENTED_EDGE('',*,*,#59860,.T.); +#59860 = EDGE_CURVE('',#59218,#59861,#59863,.T.); +#59861 = VERTEX_POINT('',#59862); +#59862 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#59863 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59864,#59865),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59864 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#59865 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#59866 = ORIENTED_EDGE('',*,*,#59867,.F.); +#59867 = EDGE_CURVE('',#59852,#59861,#59868,.T.); +#59868 = LINE('',#59869,#59870); +#59869 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59870 = VECTOR('',#59871,1.); +#59871 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59872 = PLANE('',#59873); +#59873 = AXIS2_PLACEMENT_3D('',#59874,#59875,#59876); +#59874 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#59875 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59876 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59877 = ADVANCED_FACE('',(#59878),#59895,.F.); +#59878 = FACE_BOUND('',#59879,.F.); +#59879 = EDGE_LOOP('',(#59880,#59881,#59882,#59890)); +#59880 = ORIENTED_EDGE('',*,*,#59289,.T.); +#59881 = ORIENTED_EDGE('',*,*,#59477,.T.); +#59882 = ORIENTED_EDGE('',*,*,#59883,.F.); +#59883 = EDGE_CURVE('',#59884,#59478,#59886,.T.); +#59884 = VERTEX_POINT('',#59885); +#59885 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#59886 = LINE('',#59887,#59888); +#59887 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#59888 = VECTOR('',#59889,1.); +#59889 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#59890 = ORIENTED_EDGE('',*,*,#59891,.F.); +#59891 = EDGE_CURVE('',#59290,#59884,#59892,.T.); +#59892 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59893,#59894),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59893 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#59894 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#59895 = PLANE('',#59896); +#59896 = AXIS2_PLACEMENT_3D('',#59897,#59898,#59899); +#59897 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#59898 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#59899 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#59900 = ADVANCED_FACE('',(#59901),#59918,.F.); +#59901 = FACE_BOUND('',#59902,.F.); +#59902 = EDGE_LOOP('',(#59903,#59904,#59911,#59917)); +#59903 = ORIENTED_EDGE('',*,*,#59318,.T.); +#59904 = ORIENTED_EDGE('',*,*,#59905,.T.); +#59905 = EDGE_CURVE('',#59312,#59906,#59908,.T.); +#59906 = VERTEX_POINT('',#59907); +#59907 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#59908 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#59909,#59910),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#59909 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#59910 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#59911 = ORIENTED_EDGE('',*,*,#59912,.F.); +#59912 = EDGE_CURVE('',#59861,#59906,#59913,.T.); +#59913 = LINE('',#59914,#59915); +#59914 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#59915 = VECTOR('',#59916,1.); +#59916 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#59917 = ORIENTED_EDGE('',*,*,#59860,.F.); +#59918 = PLANE('',#59919); +#59919 = AXIS2_PLACEMENT_3D('',#59920,#59921,#59922); +#59920 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#59921 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#59922 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#59923 = ADVANCED_FACE('',(#59924),#59935,.F.); +#59924 = FACE_BOUND('',#59925,.F.); +#59925 = EDGE_LOOP('',(#59926,#59927,#59928,#59934)); +#59926 = ORIENTED_EDGE('',*,*,#59335,.T.); +#59927 = ORIENTED_EDGE('',*,*,#59891,.T.); +#59928 = ORIENTED_EDGE('',*,*,#59929,.F.); +#59929 = EDGE_CURVE('',#59906,#59884,#59930,.T.); +#59930 = LINE('',#59931,#59932); +#59931 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#59932 = VECTOR('',#59933,1.); +#59933 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59934 = ORIENTED_EDGE('',*,*,#59905,.F.); +#59935 = PLANE('',#59936); +#59936 = AXIS2_PLACEMENT_3D('',#59937,#59938,#59939); +#59937 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#59938 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59939 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#59940 = ADVANCED_FACE('',(#59941),#59980,.F.); +#59941 = FACE_BOUND('',#59942,.F.); +#59942 = EDGE_LOOP('',(#59943,#59951,#59959,#59965,#59966,#59974)); +#59943 = ORIENTED_EDGE('',*,*,#59944,.F.); +#59944 = EDGE_CURVE('',#59945,#59610,#59947,.T.); +#59945 = VERTEX_POINT('',#59946); +#59946 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#59947 = LINE('',#59948,#59949); +#59948 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#59949 = VECTOR('',#59950,1.); +#59950 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#59951 = ORIENTED_EDGE('',*,*,#59952,.T.); +#59952 = EDGE_CURVE('',#59945,#59953,#59955,.T.); +#59953 = VERTEX_POINT('',#59954); +#59954 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#59955 = LINE('',#59956,#59957); +#59956 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#59957 = VECTOR('',#59958,1.); +#59958 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#59959 = ORIENTED_EDGE('',*,*,#59960,.T.); +#59960 = EDGE_CURVE('',#59953,#59440,#59961,.T.); +#59961 = LINE('',#59962,#59963); +#59962 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#59963 = VECTOR('',#59964,1.); +#59964 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#59965 = ORIENTED_EDGE('',*,*,#59439,.T.); +#59966 = ORIENTED_EDGE('',*,*,#59967,.F.); +#59967 = EDGE_CURVE('',#59968,#59432,#59970,.T.); +#59968 = VERTEX_POINT('',#59969); +#59969 = CARTESIAN_POINT('',(-0.775,0.7,0.9)); +#59970 = LINE('',#59971,#59972); +#59971 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#59972 = VECTOR('',#59973,1.); +#59973 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59974 = ORIENTED_EDGE('',*,*,#59975,.F.); +#59975 = EDGE_CURVE('',#59610,#59968,#59976,.T.); +#59976 = LINE('',#59977,#59978); +#59977 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#59978 = VECTOR('',#59979,1.); +#59979 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#59980 = PLANE('',#59981); +#59981 = AXIS2_PLACEMENT_3D('',#59982,#59983,#59984); +#59982 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#59983 = DIRECTION('',(0.,0.,-1.)); +#59984 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#59985 = ADVANCED_FACE('',(#59986),#60050,.F.); +#59986 = FACE_BOUND('',#59987,.F.); +#59987 = EDGE_LOOP('',(#59988,#59998,#60006,#60014,#60022,#60028,#60029, + #60030,#60037,#60045)); +#59988 = ORIENTED_EDGE('',*,*,#59989,.T.); +#59989 = EDGE_CURVE('',#59990,#59992,#59994,.T.); +#59990 = VERTEX_POINT('',#59991); +#59991 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#59992 = VERTEX_POINT('',#59993); +#59993 = CARTESIAN_POINT('',(-0.775,-1.2,0.9)); +#59994 = LINE('',#59995,#59996); +#59995 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#59996 = VECTOR('',#59997,1.); +#59997 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#59998 = ORIENTED_EDGE('',*,*,#59999,.T.); +#59999 = EDGE_CURVE('',#59992,#60000,#60002,.T.); +#60000 = VERTEX_POINT('',#60001); +#60001 = CARTESIAN_POINT('',(-0.775,-0.7,0.9)); +#60002 = LINE('',#60003,#60004); +#60003 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#60004 = VECTOR('',#60005,1.); +#60005 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#60006 = ORIENTED_EDGE('',*,*,#60007,.T.); +#60007 = EDGE_CURVE('',#60000,#60008,#60010,.T.); +#60008 = VERTEX_POINT('',#60009); +#60009 = CARTESIAN_POINT('',(-0.775,-0.25,0.9)); +#60010 = LINE('',#60011,#60012); +#60011 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#60012 = VECTOR('',#60013,1.); +#60013 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#60014 = ORIENTED_EDGE('',*,*,#60015,.T.); +#60015 = EDGE_CURVE('',#60008,#60016,#60018,.T.); +#60016 = VERTEX_POINT('',#60017); +#60017 = CARTESIAN_POINT('',(-0.775,0.25,0.9)); +#60018 = LINE('',#60019,#60020); +#60019 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#60020 = VECTOR('',#60021,1.); +#60021 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#60022 = ORIENTED_EDGE('',*,*,#60023,.T.); +#60023 = EDGE_CURVE('',#60016,#59968,#60024,.T.); +#60024 = LINE('',#60025,#60026); +#60025 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#60026 = VECTOR('',#60027,1.); +#60027 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#60028 = ORIENTED_EDGE('',*,*,#59967,.T.); +#60029 = ORIENTED_EDGE('',*,*,#59431,.T.); +#60030 = ORIENTED_EDGE('',*,*,#60031,.T.); +#60031 = EDGE_CURVE('',#59424,#60032,#60034,.T.); +#60032 = VERTEX_POINT('',#60033); +#60033 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#60034 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#60035,#60036),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#60035 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#60036 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#60037 = ORIENTED_EDGE('',*,*,#60038,.F.); +#60038 = EDGE_CURVE('',#60039,#60032,#60041,.T.); +#60039 = VERTEX_POINT('',#60040); +#60040 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#60041 = LINE('',#60042,#60043); +#60042 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#60043 = VECTOR('',#60044,1.); +#60044 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#60045 = ORIENTED_EDGE('',*,*,#60046,.F.); +#60046 = EDGE_CURVE('',#59990,#60039,#60047,.T.); +#60047 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#60048,#60049),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#60048 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#60049 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#60050 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#60051,#60052) + ,(#60053,#60054 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#60051 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#60052 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#60053 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#60054 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#60055 = ADVANCED_FACE('',(#60056),#60073,.F.); +#60056 = FACE_BOUND('',#60057,.F.); +#60057 = EDGE_LOOP('',(#60058,#60059,#60066,#60072)); +#60058 = ORIENTED_EDGE('',*,*,#59423,.T.); +#60059 = ORIENTED_EDGE('',*,*,#60060,.T.); +#60060 = EDGE_CURVE('',#59416,#60061,#60063,.T.); +#60061 = VERTEX_POINT('',#60062); +#60062 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#60063 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#60064,#60065),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#60064 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#60065 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#60066 = ORIENTED_EDGE('',*,*,#60067,.F.); +#60067 = EDGE_CURVE('',#60032,#60061,#60068,.T.); +#60068 = LINE('',#60069,#60070); +#60069 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#60070 = VECTOR('',#60071,1.); +#60071 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#60072 = ORIENTED_EDGE('',*,*,#60031,.F.); +#60073 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#60074,#60075) + ,(#60076,#60077 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#60074 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#60075 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#60076 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#60077 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#60078 = ADVANCED_FACE('',(#60079),#60096,.F.); +#60079 = FACE_BOUND('',#60080,.F.); +#60080 = EDGE_LOOP('',(#60081,#60082,#60089,#60095)); +#60081 = ORIENTED_EDGE('',*,*,#59415,.T.); +#60082 = ORIENTED_EDGE('',*,*,#60083,.T.); +#60083 = EDGE_CURVE('',#59408,#60084,#60086,.T.); +#60084 = VERTEX_POINT('',#60085); +#60085 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#60086 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#60087,#60088),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#60087 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#60088 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#60089 = ORIENTED_EDGE('',*,*,#60090,.F.); +#60090 = EDGE_CURVE('',#60061,#60084,#60091,.T.); +#60091 = LINE('',#60092,#60093); +#60092 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#60093 = VECTOR('',#60094,1.); +#60094 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#60095 = ORIENTED_EDGE('',*,*,#60060,.F.); +#60096 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#60097,#60098) + ,(#60099,#60100 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#60097 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#60098 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#60099 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#60100 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#60101 = ADVANCED_FACE('',(#60102),#60119,.F.); +#60102 = FACE_BOUND('',#60103,.F.); +#60103 = EDGE_LOOP('',(#60104,#60105,#60112,#60118)); +#60104 = ORIENTED_EDGE('',*,*,#59407,.T.); +#60105 = ORIENTED_EDGE('',*,*,#60106,.T.); +#60106 = EDGE_CURVE('',#59400,#60107,#60109,.T.); +#60107 = VERTEX_POINT('',#60108); +#60108 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#60109 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#60110,#60111),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#60110 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60111 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#60112 = ORIENTED_EDGE('',*,*,#60113,.F.); +#60113 = EDGE_CURVE('',#60084,#60107,#60114,.T.); +#60114 = LINE('',#60115,#60116); +#60115 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#60116 = VECTOR('',#60117,1.); +#60117 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#60118 = ORIENTED_EDGE('',*,*,#60083,.F.); +#60119 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#60120,#60121) + ,(#60122,#60123 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#60120 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#60121 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#60122 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60123 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#60124 = ADVANCED_FACE('',(#60125),#60190,.F.); +#60125 = FACE_BOUND('',#60126,.F.); +#60126 = EDGE_LOOP('',(#60127,#60128,#60136,#60144,#60152,#60160,#60168, + #60176,#60183,#60189)); +#60127 = ORIENTED_EDGE('',*,*,#59399,.T.); +#60128 = ORIENTED_EDGE('',*,*,#60129,.T.); +#60129 = EDGE_CURVE('',#59392,#60130,#60132,.T.); +#60130 = VERTEX_POINT('',#60131); +#60131 = CARTESIAN_POINT('',(0.775,0.7,0.9)); +#60132 = LINE('',#60133,#60134); +#60133 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60134 = VECTOR('',#60135,1.); +#60135 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60136 = ORIENTED_EDGE('',*,*,#60137,.T.); +#60137 = EDGE_CURVE('',#60130,#60138,#60140,.T.); +#60138 = VERTEX_POINT('',#60139); +#60139 = CARTESIAN_POINT('',(0.775,0.25,0.9)); +#60140 = LINE('',#60141,#60142); +#60141 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60142 = VECTOR('',#60143,1.); +#60143 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60144 = ORIENTED_EDGE('',*,*,#60145,.T.); +#60145 = EDGE_CURVE('',#60138,#60146,#60148,.T.); +#60146 = VERTEX_POINT('',#60147); +#60147 = CARTESIAN_POINT('',(0.775,-0.25,0.9)); +#60148 = LINE('',#60149,#60150); +#60149 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60150 = VECTOR('',#60151,1.); +#60151 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60152 = ORIENTED_EDGE('',*,*,#60153,.T.); +#60153 = EDGE_CURVE('',#60146,#60154,#60156,.T.); +#60154 = VERTEX_POINT('',#60155); +#60155 = CARTESIAN_POINT('',(0.775,-0.7,0.9)); +#60156 = LINE('',#60157,#60158); +#60157 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60158 = VECTOR('',#60159,1.); +#60159 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60160 = ORIENTED_EDGE('',*,*,#60161,.T.); +#60161 = EDGE_CURVE('',#60154,#60162,#60164,.T.); +#60162 = VERTEX_POINT('',#60163); +#60163 = CARTESIAN_POINT('',(0.775,-1.2,0.9)); +#60164 = LINE('',#60165,#60166); +#60165 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60166 = VECTOR('',#60167,1.); +#60167 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60168 = ORIENTED_EDGE('',*,*,#60169,.T.); +#60169 = EDGE_CURVE('',#60162,#60170,#60172,.T.); +#60170 = VERTEX_POINT('',#60171); +#60171 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#60172 = LINE('',#60173,#60174); +#60173 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60174 = VECTOR('',#60175,1.); +#60175 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60176 = ORIENTED_EDGE('',*,*,#60177,.T.); +#60177 = EDGE_CURVE('',#60170,#60178,#60180,.T.); +#60178 = VERTEX_POINT('',#60179); +#60179 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#60180 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#60181,#60182),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#60181 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#60182 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#60183 = ORIENTED_EDGE('',*,*,#60184,.F.); +#60184 = EDGE_CURVE('',#60107,#60178,#60185,.T.); +#60185 = LINE('',#60186,#60187); +#60186 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#60187 = VECTOR('',#60188,1.); +#60188 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60189 = ORIENTED_EDGE('',*,*,#60106,.F.); +#60190 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#60191,#60192) + ,(#60193,#60194 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#60191 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#60192 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#60193 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#60194 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#60195 = ADVANCED_FACE('',(#60196),#60228,.F.); +#60196 = FACE_BOUND('',#60197,.F.); +#60197 = EDGE_LOOP('',(#60198,#60206,#60214,#60220,#60226,#60227)); +#60198 = ORIENTED_EDGE('',*,*,#60199,.F.); +#60199 = EDGE_CURVE('',#60200,#59384,#60202,.T.); +#60200 = VERTEX_POINT('',#60201); +#60201 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#60202 = LINE('',#60203,#60204); +#60203 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#60204 = VECTOR('',#60205,1.); +#60205 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#60206 = ORIENTED_EDGE('',*,*,#60207,.T.); +#60207 = EDGE_CURVE('',#60200,#60208,#60210,.T.); +#60208 = VERTEX_POINT('',#60209); +#60209 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#60210 = LINE('',#60211,#60212); +#60211 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#60212 = VECTOR('',#60213,1.); +#60213 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60214 = ORIENTED_EDGE('',*,*,#60215,.T.); +#60215 = EDGE_CURVE('',#60208,#59728,#60216,.T.); +#60216 = LINE('',#60217,#60218); +#60217 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#60218 = VECTOR('',#60219,1.); +#60219 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#60220 = ORIENTED_EDGE('',*,*,#60221,.T.); +#60221 = EDGE_CURVE('',#59728,#60130,#60222,.T.); +#60222 = LINE('',#60223,#60224); +#60223 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#60224 = VECTOR('',#60225,1.); +#60225 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#60226 = ORIENTED_EDGE('',*,*,#60129,.F.); +#60227 = ORIENTED_EDGE('',*,*,#59391,.F.); +#60228 = PLANE('',#60229); +#60229 = AXIS2_PLACEMENT_3D('',#60230,#60231,#60232); +#60230 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#60231 = DIRECTION('',(0.,0.,-1.)); +#60232 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#60233 = ADVANCED_FACE('',(#60234),#60277,.F.); +#60234 = FACE_BOUND('',#60235,.F.); +#60235 = EDGE_LOOP('',(#60236,#60237,#60243,#60244,#60252,#60260,#60266, + #60267,#60273,#60274,#60275,#60276)); +#60236 = ORIENTED_EDGE('',*,*,#59493,.T.); +#60237 = ORIENTED_EDGE('',*,*,#60238,.T.); +#60238 = EDGE_CURVE('',#59486,#59992,#60239,.T.); +#60239 = LINE('',#60240,#60241); +#60240 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#60241 = VECTOR('',#60242,1.); +#60242 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60243 = ORIENTED_EDGE('',*,*,#59989,.F.); +#60244 = ORIENTED_EDGE('',*,*,#60245,.F.); +#60245 = EDGE_CURVE('',#60246,#59990,#60248,.T.); +#60246 = VERTEX_POINT('',#60247); +#60247 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#60248 = LINE('',#60249,#60250); +#60249 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#60250 = VECTOR('',#60251,1.); +#60251 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#60252 = ORIENTED_EDGE('',*,*,#60253,.F.); +#60253 = EDGE_CURVE('',#60254,#60246,#60256,.T.); +#60254 = VERTEX_POINT('',#60255); +#60255 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#60256 = LINE('',#60257,#60258); +#60257 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#60258 = VECTOR('',#60259,1.); +#60259 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#60260 = ORIENTED_EDGE('',*,*,#60261,.F.); +#60261 = EDGE_CURVE('',#60170,#60254,#60262,.T.); +#60262 = LINE('',#60263,#60264); +#60263 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#60264 = VECTOR('',#60265,1.); +#60265 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#60266 = ORIENTED_EDGE('',*,*,#60169,.F.); +#60267 = ORIENTED_EDGE('',*,*,#60268,.F.); +#60268 = EDGE_CURVE('',#59852,#60162,#60269,.T.); +#60269 = LINE('',#60270,#60271); +#60270 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#60271 = VECTOR('',#60272,1.); +#60272 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#60273 = ORIENTED_EDGE('',*,*,#59867,.T.); +#60274 = ORIENTED_EDGE('',*,*,#59912,.T.); +#60275 = ORIENTED_EDGE('',*,*,#59929,.T.); +#60276 = ORIENTED_EDGE('',*,*,#59883,.T.); +#60277 = PLANE('',#60278); +#60278 = AXIS2_PLACEMENT_3D('',#60279,#60280,#60281); +#60279 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#60280 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#60281 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#60282 = ADVANCED_FACE('',(#60283),#60369,.F.); +#60283 = FACE_BOUND('',#60284,.F.); +#60284 = EDGE_LOOP('',(#60285,#60286,#60287,#60296,#60304,#60313,#60321, + #60329,#60337,#60346,#60354,#60363)); +#60285 = ORIENTED_EDGE('',*,*,#59485,.F.); +#60286 = ORIENTED_EDGE('',*,*,#59507,.T.); +#60287 = ORIENTED_EDGE('',*,*,#60288,.T.); +#60288 = EDGE_CURVE('',#59508,#60289,#60291,.T.); +#60289 = VERTEX_POINT('',#60290); +#60290 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#60291 = CIRCLE('',#60292,0.1); +#60292 = AXIS2_PLACEMENT_3D('',#60293,#60294,#60295); +#60293 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#60294 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60295 = DIRECTION('',(0.,0.,1.)); +#60296 = ORIENTED_EDGE('',*,*,#60297,.T.); +#60297 = EDGE_CURVE('',#60289,#60298,#60300,.T.); +#60298 = VERTEX_POINT('',#60299); +#60299 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583)); +#60300 = LINE('',#60301,#60302); +#60301 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#60302 = VECTOR('',#60303,1.); +#60303 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#60304 = ORIENTED_EDGE('',*,*,#60305,.T.); +#60305 = EDGE_CURVE('',#60298,#60306,#60308,.T.); +#60306 = VERTEX_POINT('',#60307); +#60307 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#60308 = CIRCLE('',#60309,0.25); +#60309 = AXIS2_PLACEMENT_3D('',#60310,#60311,#60312); +#60310 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#60311 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#60312 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#60313 = ORIENTED_EDGE('',*,*,#60314,.T.); +#60314 = EDGE_CURVE('',#60306,#60315,#60317,.T.); +#60315 = VERTEX_POINT('',#60316); +#60316 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#60317 = LINE('',#60318,#60319); +#60318 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#60319 = VECTOR('',#60320,1.); +#60320 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#60321 = ORIENTED_EDGE('',*,*,#60322,.T.); +#60322 = EDGE_CURVE('',#60315,#60323,#60325,.T.); +#60323 = VERTEX_POINT('',#60324); +#60324 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#60325 = LINE('',#60326,#60327); +#60326 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#60327 = VECTOR('',#60328,1.); +#60328 = DIRECTION('',(0.,0.,1.)); +#60329 = ORIENTED_EDGE('',*,*,#60330,.T.); +#60330 = EDGE_CURVE('',#60323,#60331,#60333,.T.); +#60331 = VERTEX_POINT('',#60332); +#60332 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15)); +#60333 = LINE('',#60334,#60335); +#60334 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#60335 = VECTOR('',#60336,1.); +#60336 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60337 = ORIENTED_EDGE('',*,*,#60338,.T.); +#60338 = EDGE_CURVE('',#60331,#60339,#60341,.T.); +#60339 = VERTEX_POINT('',#60340); +#60340 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#60341 = CIRCLE('',#60342,0.1); +#60342 = AXIS2_PLACEMENT_3D('',#60343,#60344,#60345); +#60343 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#60344 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60345 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#60346 = ORIENTED_EDGE('',*,*,#60347,.T.); +#60347 = EDGE_CURVE('',#60339,#60348,#60350,.T.); +#60348 = VERTEX_POINT('',#60349); +#60349 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417)); +#60350 = LINE('',#60351,#60352); +#60351 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#60352 = VECTOR('',#60353,1.); +#60353 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#60354 = ORIENTED_EDGE('',*,*,#60355,.T.); +#60355 = EDGE_CURVE('',#60348,#60356,#60358,.T.); +#60356 = VERTEX_POINT('',#60357); +#60357 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#60358 = CIRCLE('',#60359,0.25); +#60359 = AXIS2_PLACEMENT_3D('',#60360,#60361,#60362); +#60360 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#60361 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#60362 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#60363 = ORIENTED_EDGE('',*,*,#60364,.T.); +#60364 = EDGE_CURVE('',#60356,#59486,#60365,.T.); +#60365 = LINE('',#60366,#60367); +#60366 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#60367 = VECTOR('',#60368,1.); +#60368 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60369 = PLANE('',#60370); +#60370 = AXIS2_PLACEMENT_3D('',#60371,#60372,#60373); +#60371 = CARTESIAN_POINT('',(-1.069123385139,-1.2,0.441695635315)); +#60372 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60373 = DIRECTION('',(0.,-0.,1.)); +#60374 = ADVANCED_FACE('',(#60375),#60394,.F.); +#60375 = FACE_BOUND('',#60376,.F.); +#60376 = EDGE_LOOP('',(#60377,#60378,#60387,#60393)); +#60377 = ORIENTED_EDGE('',*,*,#59524,.T.); +#60378 = ORIENTED_EDGE('',*,*,#60379,.T.); +#60379 = EDGE_CURVE('',#59517,#60380,#60382,.T.); +#60380 = VERTEX_POINT('',#60381); +#60381 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767)); +#60382 = CIRCLE('',#60383,0.1); +#60383 = AXIS2_PLACEMENT_3D('',#60384,#60385,#60386); +#60384 = CARTESIAN_POINT('',(-0.85,-0.7,0.65)); +#60385 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60386 = DIRECTION('',(0.,0.,1.)); +#60387 = ORIENTED_EDGE('',*,*,#60388,.F.); +#60388 = EDGE_CURVE('',#60289,#60380,#60389,.T.); +#60389 = LINE('',#60390,#60391); +#60390 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#60391 = VECTOR('',#60392,1.); +#60392 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60393 = ORIENTED_EDGE('',*,*,#60288,.F.); +#60394 = CYLINDRICAL_SURFACE('',#60395,0.1); +#60395 = AXIS2_PLACEMENT_3D('',#60396,#60397,#60398); +#60396 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#60397 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60398 = DIRECTION('',(0.,0.,1.)); +#60399 = ADVANCED_FACE('',(#60400),#60478,.T.); +#60400 = FACE_BOUND('',#60401,.T.); +#60401 = EDGE_LOOP('',(#60402,#60403,#60404,#60405,#60413,#60422,#60430, + #60438,#60446,#60455,#60463,#60472)); +#60402 = ORIENTED_EDGE('',*,*,#59538,.F.); +#60403 = ORIENTED_EDGE('',*,*,#59516,.T.); +#60404 = ORIENTED_EDGE('',*,*,#60379,.T.); +#60405 = ORIENTED_EDGE('',*,*,#60406,.T.); +#60406 = EDGE_CURVE('',#60380,#60407,#60409,.T.); +#60407 = VERTEX_POINT('',#60408); +#60408 = CARTESIAN_POINT('',(-1.02432885403,-0.7,0.206587955583)); +#60409 = LINE('',#60410,#60411); +#60410 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767)); +#60411 = VECTOR('',#60412,1.); +#60412 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#60413 = ORIENTED_EDGE('',*,*,#60414,.T.); +#60414 = EDGE_CURVE('',#60407,#60415,#60417,.T.); +#60415 = VERTEX_POINT('',#60416); +#60416 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.)); +#60417 = CIRCLE('',#60418,0.25); +#60418 = AXIS2_PLACEMENT_3D('',#60419,#60420,#60421); +#60419 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25)); +#60420 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#60421 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#60422 = ORIENTED_EDGE('',*,*,#60423,.T.); +#60423 = EDGE_CURVE('',#60415,#60424,#60426,.T.); +#60424 = VERTEX_POINT('',#60425); +#60425 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#60426 = LINE('',#60427,#60428); +#60427 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.)); +#60428 = VECTOR('',#60429,1.); +#60429 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#60430 = ORIENTED_EDGE('',*,*,#60431,.T.); +#60431 = EDGE_CURVE('',#60424,#60432,#60434,.T.); +#60432 = VERTEX_POINT('',#60433); +#60433 = CARTESIAN_POINT('',(-1.4,-0.7,0.15)); +#60434 = LINE('',#60435,#60436); +#60435 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#60436 = VECTOR('',#60437,1.); +#60437 = DIRECTION('',(0.,0.,1.)); +#60438 = ORIENTED_EDGE('',*,*,#60439,.T.); +#60439 = EDGE_CURVE('',#60432,#60440,#60442,.T.); +#60440 = VERTEX_POINT('',#60441); +#60441 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.15)); +#60442 = LINE('',#60443,#60444); +#60443 = CARTESIAN_POINT('',(-1.4,-0.7,0.15)); +#60444 = VECTOR('',#60445,1.); +#60445 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60446 = ORIENTED_EDGE('',*,*,#60447,.T.); +#60447 = EDGE_CURVE('',#60440,#60448,#60450,.T.); +#60448 = VERTEX_POINT('',#60449); +#60449 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233)); +#60450 = CIRCLE('',#60451,0.1); +#60451 = AXIS2_PLACEMENT_3D('',#60452,#60453,#60454); +#60452 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25)); +#60453 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60454 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#60455 = ORIENTED_EDGE('',*,*,#60456,.T.); +#60456 = EDGE_CURVE('',#60448,#60457,#60459,.T.); +#60457 = VERTEX_POINT('',#60458); +#60458 = CARTESIAN_POINT('',(-1.096201938253,-0.7,0.693412044417)); +#60459 = LINE('',#60460,#60461); +#60460 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233)); +#60461 = VECTOR('',#60462,1.); +#60462 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#60463 = ORIENTED_EDGE('',*,*,#60464,.T.); +#60464 = EDGE_CURVE('',#60457,#60465,#60467,.T.); +#60465 = VERTEX_POINT('',#60466); +#60466 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#60467 = CIRCLE('',#60468,0.25); +#60468 = AXIS2_PLACEMENT_3D('',#60469,#60470,#60471); +#60469 = CARTESIAN_POINT('',(-0.85,-0.7,0.65)); +#60470 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#60471 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#60472 = ORIENTED_EDGE('',*,*,#60473,.T.); +#60473 = EDGE_CURVE('',#60465,#59539,#60474,.T.); +#60474 = LINE('',#60475,#60476); +#60475 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#60476 = VECTOR('',#60477,1.); +#60477 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60478 = PLANE('',#60479); +#60479 = AXIS2_PLACEMENT_3D('',#60480,#60481,#60482); +#60480 = CARTESIAN_POINT('',(-1.069123385139,-0.7,0.441695635315)); +#60481 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60482 = DIRECTION('',(0.,-0.,1.)); +#60483 = ADVANCED_FACE('',(#60484),#60500,.F.); +#60484 = FACE_BOUND('',#60485,.F.); +#60485 = EDGE_LOOP('',(#60486,#60487,#60493,#60494)); +#60486 = ORIENTED_EDGE('',*,*,#59555,.T.); +#60487 = ORIENTED_EDGE('',*,*,#60488,.T.); +#60488 = EDGE_CURVE('',#59548,#60008,#60489,.T.); +#60489 = LINE('',#60490,#60491); +#60490 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#60491 = VECTOR('',#60492,1.); +#60492 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60493 = ORIENTED_EDGE('',*,*,#60007,.F.); +#60494 = ORIENTED_EDGE('',*,*,#60495,.F.); +#60495 = EDGE_CURVE('',#59539,#60000,#60496,.T.); +#60496 = LINE('',#60497,#60498); +#60497 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#60498 = VECTOR('',#60499,1.); +#60499 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60500 = PLANE('',#60501); +#60501 = AXIS2_PLACEMENT_3D('',#60502,#60503,#60504); +#60502 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#60503 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#60504 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#60505 = ADVANCED_FACE('',(#60506),#60592,.F.); +#60506 = FACE_BOUND('',#60507,.F.); +#60507 = EDGE_LOOP('',(#60508,#60509,#60510,#60519,#60527,#60536,#60544, + #60552,#60560,#60569,#60577,#60586)); +#60508 = ORIENTED_EDGE('',*,*,#59547,.F.); +#60509 = ORIENTED_EDGE('',*,*,#59569,.T.); +#60510 = ORIENTED_EDGE('',*,*,#60511,.T.); +#60511 = EDGE_CURVE('',#59570,#60512,#60514,.T.); +#60512 = VERTEX_POINT('',#60513); +#60513 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#60514 = CIRCLE('',#60515,0.1); +#60515 = AXIS2_PLACEMENT_3D('',#60516,#60517,#60518); +#60516 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#60517 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60518 = DIRECTION('',(0.,0.,1.)); +#60519 = ORIENTED_EDGE('',*,*,#60520,.T.); +#60520 = EDGE_CURVE('',#60512,#60521,#60523,.T.); +#60521 = VERTEX_POINT('',#60522); +#60522 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583)); +#60523 = LINE('',#60524,#60525); +#60524 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#60525 = VECTOR('',#60526,1.); +#60526 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#60527 = ORIENTED_EDGE('',*,*,#60528,.T.); +#60528 = EDGE_CURVE('',#60521,#60529,#60531,.T.); +#60529 = VERTEX_POINT('',#60530); +#60530 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#60531 = CIRCLE('',#60532,0.25); +#60532 = AXIS2_PLACEMENT_3D('',#60533,#60534,#60535); +#60533 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#60534 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#60535 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#60536 = ORIENTED_EDGE('',*,*,#60537,.T.); +#60537 = EDGE_CURVE('',#60529,#60538,#60540,.T.); +#60538 = VERTEX_POINT('',#60539); +#60539 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#60540 = LINE('',#60541,#60542); +#60541 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#60542 = VECTOR('',#60543,1.); +#60543 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#60544 = ORIENTED_EDGE('',*,*,#60545,.T.); +#60545 = EDGE_CURVE('',#60538,#60546,#60548,.T.); +#60546 = VERTEX_POINT('',#60547); +#60547 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#60548 = LINE('',#60549,#60550); +#60549 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#60550 = VECTOR('',#60551,1.); +#60551 = DIRECTION('',(0.,0.,1.)); +#60552 = ORIENTED_EDGE('',*,*,#60553,.T.); +#60553 = EDGE_CURVE('',#60546,#60554,#60556,.T.); +#60554 = VERTEX_POINT('',#60555); +#60555 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15)); +#60556 = LINE('',#60557,#60558); +#60557 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#60558 = VECTOR('',#60559,1.); +#60559 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60560 = ORIENTED_EDGE('',*,*,#60561,.T.); +#60561 = EDGE_CURVE('',#60554,#60562,#60564,.T.); +#60562 = VERTEX_POINT('',#60563); +#60563 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#60564 = CIRCLE('',#60565,0.1); +#60565 = AXIS2_PLACEMENT_3D('',#60566,#60567,#60568); +#60566 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#60567 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60568 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#60569 = ORIENTED_EDGE('',*,*,#60570,.T.); +#60570 = EDGE_CURVE('',#60562,#60571,#60573,.T.); +#60571 = VERTEX_POINT('',#60572); +#60572 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417)); +#60573 = LINE('',#60574,#60575); +#60574 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#60575 = VECTOR('',#60576,1.); +#60576 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#60577 = ORIENTED_EDGE('',*,*,#60578,.T.); +#60578 = EDGE_CURVE('',#60571,#60579,#60581,.T.); +#60579 = VERTEX_POINT('',#60580); +#60580 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#60581 = CIRCLE('',#60582,0.25); +#60582 = AXIS2_PLACEMENT_3D('',#60583,#60584,#60585); +#60583 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#60584 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#60585 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#60586 = ORIENTED_EDGE('',*,*,#60587,.T.); +#60587 = EDGE_CURVE('',#60579,#59548,#60588,.T.); +#60588 = LINE('',#60589,#60590); +#60589 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#60590 = VECTOR('',#60591,1.); +#60591 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60592 = PLANE('',#60593); +#60593 = AXIS2_PLACEMENT_3D('',#60594,#60595,#60596); +#60594 = CARTESIAN_POINT('',(-1.069123385139,-0.25,0.441695635315)); +#60595 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60596 = DIRECTION('',(0.,-0.,1.)); +#60597 = ADVANCED_FACE('',(#60598),#60617,.F.); +#60598 = FACE_BOUND('',#60599,.F.); +#60599 = EDGE_LOOP('',(#60600,#60601,#60610,#60616)); +#60600 = ORIENTED_EDGE('',*,*,#59586,.T.); +#60601 = ORIENTED_EDGE('',*,*,#60602,.T.); +#60602 = EDGE_CURVE('',#59579,#60603,#60605,.T.); +#60603 = VERTEX_POINT('',#60604); +#60604 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767)); +#60605 = CIRCLE('',#60606,0.1); +#60606 = AXIS2_PLACEMENT_3D('',#60607,#60608,#60609); +#60607 = CARTESIAN_POINT('',(-0.85,0.25,0.65)); +#60608 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60609 = DIRECTION('',(0.,0.,1.)); +#60610 = ORIENTED_EDGE('',*,*,#60611,.F.); +#60611 = EDGE_CURVE('',#60512,#60603,#60612,.T.); +#60612 = LINE('',#60613,#60614); +#60613 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#60614 = VECTOR('',#60615,1.); +#60615 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60616 = ORIENTED_EDGE('',*,*,#60511,.F.); +#60617 = CYLINDRICAL_SURFACE('',#60618,0.1); +#60618 = AXIS2_PLACEMENT_3D('',#60619,#60620,#60621); +#60619 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#60620 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60621 = DIRECTION('',(0.,0.,1.)); +#60622 = ADVANCED_FACE('',(#60623),#60701,.T.); +#60623 = FACE_BOUND('',#60624,.T.); +#60624 = EDGE_LOOP('',(#60625,#60626,#60627,#60628,#60636,#60645,#60653, + #60661,#60669,#60678,#60686,#60695)); +#60625 = ORIENTED_EDGE('',*,*,#59600,.F.); +#60626 = ORIENTED_EDGE('',*,*,#59578,.T.); +#60627 = ORIENTED_EDGE('',*,*,#60602,.T.); +#60628 = ORIENTED_EDGE('',*,*,#60629,.T.); +#60629 = EDGE_CURVE('',#60603,#60630,#60632,.T.); +#60630 = VERTEX_POINT('',#60631); +#60631 = CARTESIAN_POINT('',(-1.02432885403,0.25,0.206587955583)); +#60632 = LINE('',#60633,#60634); +#60633 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767)); +#60634 = VECTOR('',#60635,1.); +#60635 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#60636 = ORIENTED_EDGE('',*,*,#60637,.T.); +#60637 = EDGE_CURVE('',#60630,#60638,#60640,.T.); +#60638 = VERTEX_POINT('',#60639); +#60639 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.)); +#60640 = CIRCLE('',#60641,0.25); +#60641 = AXIS2_PLACEMENT_3D('',#60642,#60643,#60644); +#60642 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25)); +#60643 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#60644 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#60645 = ORIENTED_EDGE('',*,*,#60646,.T.); +#60646 = EDGE_CURVE('',#60638,#60647,#60649,.T.); +#60647 = VERTEX_POINT('',#60648); +#60648 = CARTESIAN_POINT('',(-1.4,0.25,0.)); +#60649 = LINE('',#60650,#60651); +#60650 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.)); +#60651 = VECTOR('',#60652,1.); +#60652 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#60653 = ORIENTED_EDGE('',*,*,#60654,.T.); +#60654 = EDGE_CURVE('',#60647,#60655,#60657,.T.); +#60655 = VERTEX_POINT('',#60656); +#60656 = CARTESIAN_POINT('',(-1.4,0.25,0.15)); +#60657 = LINE('',#60658,#60659); +#60658 = CARTESIAN_POINT('',(-1.4,0.25,0.)); +#60659 = VECTOR('',#60660,1.); +#60660 = DIRECTION('',(0.,0.,1.)); +#60661 = ORIENTED_EDGE('',*,*,#60662,.T.); +#60662 = EDGE_CURVE('',#60655,#60663,#60665,.T.); +#60663 = VERTEX_POINT('',#60664); +#60664 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.15)); +#60665 = LINE('',#60666,#60667); +#60666 = CARTESIAN_POINT('',(-1.4,0.25,0.15)); +#60667 = VECTOR('',#60668,1.); +#60668 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60669 = ORIENTED_EDGE('',*,*,#60670,.T.); +#60670 = EDGE_CURVE('',#60663,#60671,#60673,.T.); +#60671 = VERTEX_POINT('',#60672); +#60672 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233)); +#60673 = CIRCLE('',#60674,0.1); +#60674 = AXIS2_PLACEMENT_3D('',#60675,#60676,#60677); +#60675 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25)); +#60676 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60677 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#60678 = ORIENTED_EDGE('',*,*,#60679,.T.); +#60679 = EDGE_CURVE('',#60671,#60680,#60682,.T.); +#60680 = VERTEX_POINT('',#60681); +#60681 = CARTESIAN_POINT('',(-1.096201938253,0.25,0.693412044417)); +#60682 = LINE('',#60683,#60684); +#60683 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233)); +#60684 = VECTOR('',#60685,1.); +#60685 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#60686 = ORIENTED_EDGE('',*,*,#60687,.T.); +#60687 = EDGE_CURVE('',#60680,#60688,#60690,.T.); +#60688 = VERTEX_POINT('',#60689); +#60689 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#60690 = CIRCLE('',#60691,0.25); +#60691 = AXIS2_PLACEMENT_3D('',#60692,#60693,#60694); +#60692 = CARTESIAN_POINT('',(-0.85,0.25,0.65)); +#60693 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#60694 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#60695 = ORIENTED_EDGE('',*,*,#60696,.T.); +#60696 = EDGE_CURVE('',#60688,#59601,#60697,.T.); +#60697 = LINE('',#60698,#60699); +#60698 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#60699 = VECTOR('',#60700,1.); +#60700 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60701 = PLANE('',#60702); +#60702 = AXIS2_PLACEMENT_3D('',#60703,#60704,#60705); +#60703 = CARTESIAN_POINT('',(-1.069123385139,0.25,0.441695635315)); +#60704 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60705 = DIRECTION('',(0.,-0.,1.)); +#60706 = ADVANCED_FACE('',(#60707),#60718,.F.); +#60707 = FACE_BOUND('',#60708,.F.); +#60708 = EDGE_LOOP('',(#60709,#60710,#60711,#60712)); +#60709 = ORIENTED_EDGE('',*,*,#59617,.T.); +#60710 = ORIENTED_EDGE('',*,*,#59975,.T.); +#60711 = ORIENTED_EDGE('',*,*,#60023,.F.); +#60712 = ORIENTED_EDGE('',*,*,#60713,.F.); +#60713 = EDGE_CURVE('',#59601,#60016,#60714,.T.); +#60714 = LINE('',#60715,#60716); +#60715 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#60716 = VECTOR('',#60717,1.); +#60717 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60718 = PLANE('',#60719); +#60719 = AXIS2_PLACEMENT_3D('',#60720,#60721,#60722); +#60720 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#60721 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#60722 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#60723 = ADVANCED_FACE('',(#60724),#60803,.F.); +#60724 = FACE_BOUND('',#60725,.F.); +#60725 = EDGE_LOOP('',(#60726,#60727,#60728,#60737,#60745,#60754,#60762, + #60770,#60778,#60787,#60795,#60802)); +#60726 = ORIENTED_EDGE('',*,*,#59609,.F.); +#60727 = ORIENTED_EDGE('',*,*,#59631,.T.); +#60728 = ORIENTED_EDGE('',*,*,#60729,.T.); +#60729 = EDGE_CURVE('',#59632,#60730,#60732,.T.); +#60730 = VERTEX_POINT('',#60731); +#60731 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#60732 = CIRCLE('',#60733,0.1); +#60733 = AXIS2_PLACEMENT_3D('',#60734,#60735,#60736); +#60734 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#60735 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60736 = DIRECTION('',(0.,0.,1.)); +#60737 = ORIENTED_EDGE('',*,*,#60738,.T.); +#60738 = EDGE_CURVE('',#60730,#60739,#60741,.T.); +#60739 = VERTEX_POINT('',#60740); +#60740 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583)); +#60741 = LINE('',#60742,#60743); +#60742 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#60743 = VECTOR('',#60744,1.); +#60744 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#60745 = ORIENTED_EDGE('',*,*,#60746,.T.); +#60746 = EDGE_CURVE('',#60739,#60747,#60749,.T.); +#60747 = VERTEX_POINT('',#60748); +#60748 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#60749 = CIRCLE('',#60750,0.25); +#60750 = AXIS2_PLACEMENT_3D('',#60751,#60752,#60753); +#60751 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#60752 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#60753 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#60754 = ORIENTED_EDGE('',*,*,#60755,.T.); +#60755 = EDGE_CURVE('',#60747,#60756,#60758,.T.); +#60756 = VERTEX_POINT('',#60757); +#60757 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#60758 = LINE('',#60759,#60760); +#60759 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#60760 = VECTOR('',#60761,1.); +#60761 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#60762 = ORIENTED_EDGE('',*,*,#60763,.T.); +#60763 = EDGE_CURVE('',#60756,#60764,#60766,.T.); +#60764 = VERTEX_POINT('',#60765); +#60765 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#60766 = LINE('',#60767,#60768); +#60767 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#60768 = VECTOR('',#60769,1.); +#60769 = DIRECTION('',(0.,0.,1.)); +#60770 = ORIENTED_EDGE('',*,*,#60771,.T.); +#60771 = EDGE_CURVE('',#60764,#60772,#60774,.T.); +#60772 = VERTEX_POINT('',#60773); +#60773 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15)); +#60774 = LINE('',#60775,#60776); +#60775 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#60776 = VECTOR('',#60777,1.); +#60777 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60778 = ORIENTED_EDGE('',*,*,#60779,.T.); +#60779 = EDGE_CURVE('',#60772,#60780,#60782,.T.); +#60780 = VERTEX_POINT('',#60781); +#60781 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#60782 = CIRCLE('',#60783,0.1); +#60783 = AXIS2_PLACEMENT_3D('',#60784,#60785,#60786); +#60784 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#60785 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60786 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#60787 = ORIENTED_EDGE('',*,*,#60788,.T.); +#60788 = EDGE_CURVE('',#60780,#60789,#60791,.T.); +#60789 = VERTEX_POINT('',#60790); +#60790 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417)); +#60791 = LINE('',#60792,#60793); +#60792 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#60793 = VECTOR('',#60794,1.); +#60794 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#60795 = ORIENTED_EDGE('',*,*,#60796,.T.); +#60796 = EDGE_CURVE('',#60789,#59945,#60797,.T.); +#60797 = CIRCLE('',#60798,0.25); +#60798 = AXIS2_PLACEMENT_3D('',#60799,#60800,#60801); +#60799 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#60800 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#60801 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#60802 = ORIENTED_EDGE('',*,*,#59944,.T.); +#60803 = PLANE('',#60804); +#60804 = AXIS2_PLACEMENT_3D('',#60805,#60806,#60807); +#60805 = CARTESIAN_POINT('',(-1.069123385139,0.7,0.441695635315)); +#60806 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60807 = DIRECTION('',(0.,-0.,1.)); +#60808 = ADVANCED_FACE('',(#60809),#60828,.F.); +#60809 = FACE_BOUND('',#60810,.F.); +#60810 = EDGE_LOOP('',(#60811,#60812,#60821,#60827)); +#60811 = ORIENTED_EDGE('',*,*,#59648,.T.); +#60812 = ORIENTED_EDGE('',*,*,#60813,.T.); +#60813 = EDGE_CURVE('',#59641,#60814,#60816,.T.); +#60814 = VERTEX_POINT('',#60815); +#60815 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767)); +#60816 = CIRCLE('',#60817,0.1); +#60817 = AXIS2_PLACEMENT_3D('',#60818,#60819,#60820); +#60818 = CARTESIAN_POINT('',(-0.85,1.2,0.65)); +#60819 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60820 = DIRECTION('',(0.,0.,1.)); +#60821 = ORIENTED_EDGE('',*,*,#60822,.F.); +#60822 = EDGE_CURVE('',#60730,#60814,#60823,.T.); +#60823 = LINE('',#60824,#60825); +#60824 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#60825 = VECTOR('',#60826,1.); +#60826 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60827 = ORIENTED_EDGE('',*,*,#60729,.F.); +#60828 = CYLINDRICAL_SURFACE('',#60829,0.1); +#60829 = AXIS2_PLACEMENT_3D('',#60830,#60831,#60832); +#60830 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#60831 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60832 = DIRECTION('',(0.,0.,1.)); +#60833 = ADVANCED_FACE('',(#60834),#60905,.T.); +#60834 = FACE_BOUND('',#60835,.T.); +#60835 = EDGE_LOOP('',(#60836,#60837,#60838,#60839,#60847,#60856,#60864, + #60872,#60880,#60889,#60897,#60904)); +#60836 = ORIENTED_EDGE('',*,*,#59662,.F.); +#60837 = ORIENTED_EDGE('',*,*,#59640,.T.); +#60838 = ORIENTED_EDGE('',*,*,#60813,.T.); +#60839 = ORIENTED_EDGE('',*,*,#60840,.T.); +#60840 = EDGE_CURVE('',#60814,#60841,#60843,.T.); +#60841 = VERTEX_POINT('',#60842); +#60842 = CARTESIAN_POINT('',(-1.02432885403,1.2,0.206587955583)); +#60843 = LINE('',#60844,#60845); +#60844 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767)); +#60845 = VECTOR('',#60846,1.); +#60846 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#60847 = ORIENTED_EDGE('',*,*,#60848,.T.); +#60848 = EDGE_CURVE('',#60841,#60849,#60851,.T.); +#60849 = VERTEX_POINT('',#60850); +#60850 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.)); +#60851 = CIRCLE('',#60852,0.25); +#60852 = AXIS2_PLACEMENT_3D('',#60853,#60854,#60855); +#60853 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25)); +#60854 = DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33)); +#60855 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#60856 = ORIENTED_EDGE('',*,*,#60857,.T.); +#60857 = EDGE_CURVE('',#60849,#60858,#60860,.T.); +#60858 = VERTEX_POINT('',#60859); +#60859 = CARTESIAN_POINT('',(-1.4,1.2,0.)); +#60860 = LINE('',#60861,#60862); +#60861 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.)); +#60862 = VECTOR('',#60863,1.); +#60863 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#60864 = ORIENTED_EDGE('',*,*,#60865,.T.); +#60865 = EDGE_CURVE('',#60858,#60866,#60868,.T.); +#60866 = VERTEX_POINT('',#60867); +#60867 = CARTESIAN_POINT('',(-1.4,1.2,0.15)); +#60868 = LINE('',#60869,#60870); +#60869 = CARTESIAN_POINT('',(-1.4,1.2,0.)); +#60870 = VECTOR('',#60871,1.); +#60871 = DIRECTION('',(0.,0.,1.)); +#60872 = ORIENTED_EDGE('',*,*,#60873,.T.); +#60873 = EDGE_CURVE('',#60866,#60874,#60876,.T.); +#60874 = VERTEX_POINT('',#60875); +#60875 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.15)); +#60876 = LINE('',#60877,#60878); +#60877 = CARTESIAN_POINT('',(-1.4,1.2,0.15)); +#60878 = VECTOR('',#60879,1.); +#60879 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#60880 = ORIENTED_EDGE('',*,*,#60881,.T.); +#60881 = EDGE_CURVE('',#60874,#60882,#60884,.T.); +#60882 = VERTEX_POINT('',#60883); +#60883 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233)); +#60884 = CIRCLE('',#60885,0.1); +#60885 = AXIS2_PLACEMENT_3D('',#60886,#60887,#60888); +#60886 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25)); +#60887 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#60888 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#60889 = ORIENTED_EDGE('',*,*,#60890,.T.); +#60890 = EDGE_CURVE('',#60882,#60891,#60893,.T.); +#60891 = VERTEX_POINT('',#60892); +#60892 = CARTESIAN_POINT('',(-1.096201938253,1.2,0.693412044417)); +#60893 = LINE('',#60894,#60895); +#60894 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233)); +#60895 = VECTOR('',#60896,1.); +#60896 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#60897 = ORIENTED_EDGE('',*,*,#60898,.T.); +#60898 = EDGE_CURVE('',#60891,#59953,#60899,.T.); +#60899 = CIRCLE('',#60900,0.25); +#60900 = AXIS2_PLACEMENT_3D('',#60901,#60902,#60903); +#60901 = CARTESIAN_POINT('',(-0.85,1.2,0.65)); +#60902 = DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34)); +#60903 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#60904 = ORIENTED_EDGE('',*,*,#59960,.T.); +#60905 = PLANE('',#60906); +#60906 = AXIS2_PLACEMENT_3D('',#60907,#60908,#60909); +#60907 = CARTESIAN_POINT('',(-1.069123385139,1.2,0.441695635315)); +#60908 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#60909 = DIRECTION('',(0.,-0.,1.)); +#60910 = ADVANCED_FACE('',(#60911),#60990,.F.); +#60911 = FACE_BOUND('',#60912,.F.); +#60912 = EDGE_LOOP('',(#60913,#60914,#60915,#60924,#60932,#60941,#60949, + #60957,#60965,#60974,#60982,#60989)); +#60913 = ORIENTED_EDGE('',*,*,#59681,.F.); +#60914 = ORIENTED_EDGE('',*,*,#59696,.T.); +#60915 = ORIENTED_EDGE('',*,*,#60916,.T.); +#60916 = EDGE_CURVE('',#59697,#60917,#60919,.T.); +#60917 = VERTEX_POINT('',#60918); +#60918 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#60919 = CIRCLE('',#60920,0.1); +#60920 = AXIS2_PLACEMENT_3D('',#60921,#60922,#60923); +#60921 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#60922 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#60923 = DIRECTION('',(0.,0.,1.)); +#60924 = ORIENTED_EDGE('',*,*,#60925,.T.); +#60925 = EDGE_CURVE('',#60917,#60926,#60928,.T.); +#60926 = VERTEX_POINT('',#60927); +#60927 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583)); +#60928 = LINE('',#60929,#60930); +#60929 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#60930 = VECTOR('',#60931,1.); +#60931 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#60932 = ORIENTED_EDGE('',*,*,#60933,.T.); +#60933 = EDGE_CURVE('',#60926,#60934,#60936,.T.); +#60934 = VERTEX_POINT('',#60935); +#60935 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#60936 = CIRCLE('',#60937,0.25); +#60937 = AXIS2_PLACEMENT_3D('',#60938,#60939,#60940); +#60938 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#60939 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60940 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#60941 = ORIENTED_EDGE('',*,*,#60942,.T.); +#60942 = EDGE_CURVE('',#60934,#60943,#60945,.T.); +#60943 = VERTEX_POINT('',#60944); +#60944 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#60945 = LINE('',#60946,#60947); +#60946 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#60947 = VECTOR('',#60948,1.); +#60948 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#60949 = ORIENTED_EDGE('',*,*,#60950,.T.); +#60950 = EDGE_CURVE('',#60943,#60951,#60953,.T.); +#60951 = VERTEX_POINT('',#60952); +#60952 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#60953 = LINE('',#60954,#60955); +#60954 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#60955 = VECTOR('',#60956,1.); +#60956 = DIRECTION('',(0.,0.,1.)); +#60957 = ORIENTED_EDGE('',*,*,#60958,.T.); +#60958 = EDGE_CURVE('',#60951,#60959,#60961,.T.); +#60959 = VERTEX_POINT('',#60960); +#60960 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15)); +#60961 = LINE('',#60962,#60963); +#60962 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#60963 = VECTOR('',#60964,1.); +#60964 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#60965 = ORIENTED_EDGE('',*,*,#60966,.T.); +#60966 = EDGE_CURVE('',#60959,#60967,#60969,.T.); +#60967 = VERTEX_POINT('',#60968); +#60968 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#60969 = CIRCLE('',#60970,0.1); +#60970 = AXIS2_PLACEMENT_3D('',#60971,#60972,#60973); +#60971 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#60972 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#60973 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#60974 = ORIENTED_EDGE('',*,*,#60975,.T.); +#60975 = EDGE_CURVE('',#60967,#60976,#60978,.T.); +#60976 = VERTEX_POINT('',#60977); +#60977 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417)); +#60978 = LINE('',#60979,#60980); +#60979 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#60980 = VECTOR('',#60981,1.); +#60981 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#60982 = ORIENTED_EDGE('',*,*,#60983,.T.); +#60983 = EDGE_CURVE('',#60976,#60200,#60984,.T.); +#60984 = CIRCLE('',#60985,0.25); +#60985 = AXIS2_PLACEMENT_3D('',#60986,#60987,#60988); +#60986 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#60987 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60988 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#60989 = ORIENTED_EDGE('',*,*,#60199,.T.); +#60990 = PLANE('',#60991); +#60991 = AXIS2_PLACEMENT_3D('',#60992,#60993,#60994); +#60992 = CARTESIAN_POINT('',(1.069123385139,1.2,0.441695635315)); +#60993 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#60994 = DIRECTION('',(0.,0.,1.)); +#60995 = ADVANCED_FACE('',(#60996),#61015,.F.); +#60996 = FACE_BOUND('',#60997,.F.); +#60997 = EDGE_LOOP('',(#60998,#60999,#61008,#61014)); +#60998 = ORIENTED_EDGE('',*,*,#59713,.T.); +#60999 = ORIENTED_EDGE('',*,*,#61000,.T.); +#61000 = EDGE_CURVE('',#59706,#61001,#61003,.T.); +#61001 = VERTEX_POINT('',#61002); +#61002 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767)); +#61003 = CIRCLE('',#61004,0.1); +#61004 = AXIS2_PLACEMENT_3D('',#61005,#61006,#61007); +#61005 = CARTESIAN_POINT('',(0.85,0.7,0.65)); +#61006 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61007 = DIRECTION('',(0.,0.,1.)); +#61008 = ORIENTED_EDGE('',*,*,#61009,.F.); +#61009 = EDGE_CURVE('',#60917,#61001,#61010,.T.); +#61010 = LINE('',#61011,#61012); +#61011 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#61012 = VECTOR('',#61013,1.); +#61013 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61014 = ORIENTED_EDGE('',*,*,#60916,.F.); +#61015 = CYLINDRICAL_SURFACE('',#61016,0.1); +#61016 = AXIS2_PLACEMENT_3D('',#61017,#61018,#61019); +#61017 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#61018 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61019 = DIRECTION('',(0.,0.,1.)); +#61020 = ADVANCED_FACE('',(#61021),#61092,.T.); +#61021 = FACE_BOUND('',#61022,.T.); +#61022 = EDGE_LOOP('',(#61023,#61024,#61025,#61026,#61034,#61043,#61051, + #61059,#61067,#61076,#61084,#61091)); +#61023 = ORIENTED_EDGE('',*,*,#59727,.F.); +#61024 = ORIENTED_EDGE('',*,*,#59705,.T.); +#61025 = ORIENTED_EDGE('',*,*,#61000,.T.); +#61026 = ORIENTED_EDGE('',*,*,#61027,.T.); +#61027 = EDGE_CURVE('',#61001,#61028,#61030,.T.); +#61028 = VERTEX_POINT('',#61029); +#61029 = CARTESIAN_POINT('',(1.02432885403,0.7,0.206587955583)); +#61030 = LINE('',#61031,#61032); +#61031 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767)); +#61032 = VECTOR('',#61033,1.); +#61033 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#61034 = ORIENTED_EDGE('',*,*,#61035,.T.); +#61035 = EDGE_CURVE('',#61028,#61036,#61038,.T.); +#61036 = VERTEX_POINT('',#61037); +#61037 = CARTESIAN_POINT('',(1.270530792283,0.7,0.)); +#61038 = CIRCLE('',#61039,0.25); +#61039 = AXIS2_PLACEMENT_3D('',#61040,#61041,#61042); +#61040 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25)); +#61041 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61042 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#61043 = ORIENTED_EDGE('',*,*,#61044,.T.); +#61044 = EDGE_CURVE('',#61036,#61045,#61047,.T.); +#61045 = VERTEX_POINT('',#61046); +#61046 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#61047 = LINE('',#61048,#61049); +#61048 = CARTESIAN_POINT('',(1.270530792283,0.7,0.)); +#61049 = VECTOR('',#61050,1.); +#61050 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#61051 = ORIENTED_EDGE('',*,*,#61052,.T.); +#61052 = EDGE_CURVE('',#61045,#61053,#61055,.T.); +#61053 = VERTEX_POINT('',#61054); +#61054 = CARTESIAN_POINT('',(1.4,0.7,0.15)); +#61055 = LINE('',#61056,#61057); +#61056 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#61057 = VECTOR('',#61058,1.); +#61058 = DIRECTION('',(0.,0.,1.)); +#61059 = ORIENTED_EDGE('',*,*,#61060,.T.); +#61060 = EDGE_CURVE('',#61053,#61061,#61063,.T.); +#61061 = VERTEX_POINT('',#61062); +#61062 = CARTESIAN_POINT('',(1.270530792283,0.7,0.15)); +#61063 = LINE('',#61064,#61065); +#61064 = CARTESIAN_POINT('',(1.4,0.7,0.15)); +#61065 = VECTOR('',#61066,1.); +#61066 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61067 = ORIENTED_EDGE('',*,*,#61068,.T.); +#61068 = EDGE_CURVE('',#61061,#61069,#61071,.T.); +#61069 = VERTEX_POINT('',#61070); +#61070 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233)); +#61071 = CIRCLE('',#61072,0.1); +#61072 = AXIS2_PLACEMENT_3D('',#61073,#61074,#61075); +#61073 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25)); +#61074 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61075 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#61076 = ORIENTED_EDGE('',*,*,#61077,.T.); +#61077 = EDGE_CURVE('',#61069,#61078,#61080,.T.); +#61078 = VERTEX_POINT('',#61079); +#61079 = CARTESIAN_POINT('',(1.096201938253,0.7,0.693412044417)); +#61080 = LINE('',#61081,#61082); +#61081 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233)); +#61082 = VECTOR('',#61083,1.); +#61083 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#61084 = ORIENTED_EDGE('',*,*,#61085,.T.); +#61085 = EDGE_CURVE('',#61078,#60208,#61086,.T.); +#61086 = CIRCLE('',#61087,0.25); +#61087 = AXIS2_PLACEMENT_3D('',#61088,#61089,#61090); +#61088 = CARTESIAN_POINT('',(0.85,0.7,0.65)); +#61089 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61090 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#61091 = ORIENTED_EDGE('',*,*,#60215,.T.); +#61092 = PLANE('',#61093); +#61093 = AXIS2_PLACEMENT_3D('',#61094,#61095,#61096); +#61094 = CARTESIAN_POINT('',(1.069123385139,0.7,0.441695635315)); +#61095 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61096 = DIRECTION('',(0.,0.,1.)); +#61097 = ADVANCED_FACE('',(#61098),#61109,.F.); +#61098 = FACE_BOUND('',#61099,.F.); +#61099 = EDGE_LOOP('',(#61100,#61101,#61102,#61108)); +#61100 = ORIENTED_EDGE('',*,*,#60221,.F.); +#61101 = ORIENTED_EDGE('',*,*,#59744,.T.); +#61102 = ORIENTED_EDGE('',*,*,#61103,.T.); +#61103 = EDGE_CURVE('',#59737,#60138,#61104,.T.); +#61104 = LINE('',#61105,#61106); +#61105 = CARTESIAN_POINT('',(0.85,0.25,0.9)); +#61106 = VECTOR('',#61107,1.); +#61107 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61108 = ORIENTED_EDGE('',*,*,#60137,.F.); +#61109 = PLANE('',#61110); +#61110 = AXIS2_PLACEMENT_3D('',#61111,#61112,#61113); +#61111 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#61112 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#61113 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#61114 = ADVANCED_FACE('',(#61115),#61201,.F.); +#61115 = FACE_BOUND('',#61116,.F.); +#61116 = EDGE_LOOP('',(#61117,#61118,#61119,#61128,#61136,#61145,#61153, + #61161,#61169,#61178,#61186,#61195)); +#61117 = ORIENTED_EDGE('',*,*,#59736,.F.); +#61118 = ORIENTED_EDGE('',*,*,#59758,.T.); +#61119 = ORIENTED_EDGE('',*,*,#61120,.T.); +#61120 = EDGE_CURVE('',#59759,#61121,#61123,.T.); +#61121 = VERTEX_POINT('',#61122); +#61122 = CARTESIAN_POINT('',(0.948480775301,0.25,0.667364817767)); +#61123 = CIRCLE('',#61124,0.1); +#61124 = AXIS2_PLACEMENT_3D('',#61125,#61126,#61127); +#61125 = CARTESIAN_POINT('',(0.85,0.25,0.65)); +#61126 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61127 = DIRECTION('',(0.,0.,1.)); +#61128 = ORIENTED_EDGE('',*,*,#61129,.T.); +#61129 = EDGE_CURVE('',#61121,#61130,#61132,.T.); +#61130 = VERTEX_POINT('',#61131); +#61131 = CARTESIAN_POINT('',(1.02432885403,0.25,0.206587955583)); +#61132 = LINE('',#61133,#61134); +#61133 = CARTESIAN_POINT('',(0.948480775301,0.25,0.667364817767)); +#61134 = VECTOR('',#61135,1.); +#61135 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#61136 = ORIENTED_EDGE('',*,*,#61137,.T.); +#61137 = EDGE_CURVE('',#61130,#61138,#61140,.T.); +#61138 = VERTEX_POINT('',#61139); +#61139 = CARTESIAN_POINT('',(1.270530792283,0.25,0.)); +#61140 = CIRCLE('',#61141,0.25); +#61141 = AXIS2_PLACEMENT_3D('',#61142,#61143,#61144); +#61142 = CARTESIAN_POINT('',(1.270530792283,0.25,0.25)); +#61143 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61144 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#61145 = ORIENTED_EDGE('',*,*,#61146,.T.); +#61146 = EDGE_CURVE('',#61138,#61147,#61149,.T.); +#61147 = VERTEX_POINT('',#61148); +#61148 = CARTESIAN_POINT('',(1.4,0.25,0.)); +#61149 = LINE('',#61150,#61151); +#61150 = CARTESIAN_POINT('',(1.270530792283,0.25,0.)); +#61151 = VECTOR('',#61152,1.); +#61152 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#61153 = ORIENTED_EDGE('',*,*,#61154,.T.); +#61154 = EDGE_CURVE('',#61147,#61155,#61157,.T.); +#61155 = VERTEX_POINT('',#61156); +#61156 = CARTESIAN_POINT('',(1.4,0.25,0.15)); +#61157 = LINE('',#61158,#61159); +#61158 = CARTESIAN_POINT('',(1.4,0.25,0.)); +#61159 = VECTOR('',#61160,1.); +#61160 = DIRECTION('',(0.,0.,1.)); +#61161 = ORIENTED_EDGE('',*,*,#61162,.T.); +#61162 = EDGE_CURVE('',#61155,#61163,#61165,.T.); +#61163 = VERTEX_POINT('',#61164); +#61164 = CARTESIAN_POINT('',(1.270530792283,0.25,0.15)); +#61165 = LINE('',#61166,#61167); +#61166 = CARTESIAN_POINT('',(1.4,0.25,0.15)); +#61167 = VECTOR('',#61168,1.); +#61168 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61169 = ORIENTED_EDGE('',*,*,#61170,.T.); +#61170 = EDGE_CURVE('',#61163,#61171,#61173,.T.); +#61171 = VERTEX_POINT('',#61172); +#61172 = CARTESIAN_POINT('',(1.172050016982,0.25,0.232635182233)); +#61173 = CIRCLE('',#61174,0.1); +#61174 = AXIS2_PLACEMENT_3D('',#61175,#61176,#61177); +#61175 = CARTESIAN_POINT('',(1.270530792283,0.25,0.25)); +#61176 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61177 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#61178 = ORIENTED_EDGE('',*,*,#61179,.T.); +#61179 = EDGE_CURVE('',#61171,#61180,#61182,.T.); +#61180 = VERTEX_POINT('',#61181); +#61181 = CARTESIAN_POINT('',(1.096201938253,0.25,0.693412044417)); +#61182 = LINE('',#61183,#61184); +#61183 = CARTESIAN_POINT('',(1.172050016982,0.25,0.232635182233)); +#61184 = VECTOR('',#61185,1.); +#61185 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#61186 = ORIENTED_EDGE('',*,*,#61187,.T.); +#61187 = EDGE_CURVE('',#61180,#61188,#61190,.T.); +#61188 = VERTEX_POINT('',#61189); +#61189 = CARTESIAN_POINT('',(0.85,0.25,0.9)); +#61190 = CIRCLE('',#61191,0.25); +#61191 = AXIS2_PLACEMENT_3D('',#61192,#61193,#61194); +#61192 = CARTESIAN_POINT('',(0.85,0.25,0.65)); +#61193 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61194 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#61195 = ORIENTED_EDGE('',*,*,#61196,.T.); +#61196 = EDGE_CURVE('',#61188,#59737,#61197,.T.); +#61197 = LINE('',#61198,#61199); +#61198 = CARTESIAN_POINT('',(0.85,0.25,0.9)); +#61199 = VECTOR('',#61200,1.); +#61200 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61201 = PLANE('',#61202); +#61202 = AXIS2_PLACEMENT_3D('',#61203,#61204,#61205); +#61203 = CARTESIAN_POINT('',(1.069123385139,0.25,0.441695635315)); +#61204 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61205 = DIRECTION('',(0.,0.,1.)); +#61206 = ADVANCED_FACE('',(#61207),#61226,.F.); +#61207 = FACE_BOUND('',#61208,.F.); +#61208 = EDGE_LOOP('',(#61209,#61210,#61219,#61225)); +#61209 = ORIENTED_EDGE('',*,*,#59775,.T.); +#61210 = ORIENTED_EDGE('',*,*,#61211,.T.); +#61211 = EDGE_CURVE('',#59768,#61212,#61214,.T.); +#61212 = VERTEX_POINT('',#61213); +#61213 = CARTESIAN_POINT('',(0.948480775301,-0.25,0.667364817767)); +#61214 = CIRCLE('',#61215,0.1); +#61215 = AXIS2_PLACEMENT_3D('',#61216,#61217,#61218); +#61216 = CARTESIAN_POINT('',(0.85,-0.25,0.65)); +#61217 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61218 = DIRECTION('',(0.,0.,1.)); +#61219 = ORIENTED_EDGE('',*,*,#61220,.F.); +#61220 = EDGE_CURVE('',#61121,#61212,#61221,.T.); +#61221 = LINE('',#61222,#61223); +#61222 = CARTESIAN_POINT('',(0.948480775301,0.25,0.667364817767)); +#61223 = VECTOR('',#61224,1.); +#61224 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61225 = ORIENTED_EDGE('',*,*,#61120,.F.); +#61226 = CYLINDRICAL_SURFACE('',#61227,0.1); +#61227 = AXIS2_PLACEMENT_3D('',#61228,#61229,#61230); +#61228 = CARTESIAN_POINT('',(0.85,0.25,0.65)); +#61229 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61230 = DIRECTION('',(0.,0.,1.)); +#61231 = ADVANCED_FACE('',(#61232),#61310,.T.); +#61232 = FACE_BOUND('',#61233,.T.); +#61233 = EDGE_LOOP('',(#61234,#61235,#61236,#61237,#61245,#61254,#61262, + #61270,#61278,#61287,#61295,#61304)); +#61234 = ORIENTED_EDGE('',*,*,#59789,.F.); +#61235 = ORIENTED_EDGE('',*,*,#59767,.T.); +#61236 = ORIENTED_EDGE('',*,*,#61211,.T.); +#61237 = ORIENTED_EDGE('',*,*,#61238,.T.); +#61238 = EDGE_CURVE('',#61212,#61239,#61241,.T.); +#61239 = VERTEX_POINT('',#61240); +#61240 = CARTESIAN_POINT('',(1.02432885403,-0.25,0.206587955583)); +#61241 = LINE('',#61242,#61243); +#61242 = CARTESIAN_POINT('',(0.948480775301,-0.25,0.667364817767)); +#61243 = VECTOR('',#61244,1.); +#61244 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#61245 = ORIENTED_EDGE('',*,*,#61246,.T.); +#61246 = EDGE_CURVE('',#61239,#61247,#61249,.T.); +#61247 = VERTEX_POINT('',#61248); +#61248 = CARTESIAN_POINT('',(1.270530792283,-0.25,0.)); +#61249 = CIRCLE('',#61250,0.25); +#61250 = AXIS2_PLACEMENT_3D('',#61251,#61252,#61253); +#61251 = CARTESIAN_POINT('',(1.270530792283,-0.25,0.25)); +#61252 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61253 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#61254 = ORIENTED_EDGE('',*,*,#61255,.T.); +#61255 = EDGE_CURVE('',#61247,#61256,#61258,.T.); +#61256 = VERTEX_POINT('',#61257); +#61257 = CARTESIAN_POINT('',(1.4,-0.25,0.)); +#61258 = LINE('',#61259,#61260); +#61259 = CARTESIAN_POINT('',(1.270530792283,-0.25,0.)); +#61260 = VECTOR('',#61261,1.); +#61261 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#61262 = ORIENTED_EDGE('',*,*,#61263,.T.); +#61263 = EDGE_CURVE('',#61256,#61264,#61266,.T.); +#61264 = VERTEX_POINT('',#61265); +#61265 = CARTESIAN_POINT('',(1.4,-0.25,0.15)); +#61266 = LINE('',#61267,#61268); +#61267 = CARTESIAN_POINT('',(1.4,-0.25,0.)); +#61268 = VECTOR('',#61269,1.); +#61269 = DIRECTION('',(0.,0.,1.)); +#61270 = ORIENTED_EDGE('',*,*,#61271,.T.); +#61271 = EDGE_CURVE('',#61264,#61272,#61274,.T.); +#61272 = VERTEX_POINT('',#61273); +#61273 = CARTESIAN_POINT('',(1.270530792283,-0.25,0.15)); +#61274 = LINE('',#61275,#61276); +#61275 = CARTESIAN_POINT('',(1.4,-0.25,0.15)); +#61276 = VECTOR('',#61277,1.); +#61277 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61278 = ORIENTED_EDGE('',*,*,#61279,.T.); +#61279 = EDGE_CURVE('',#61272,#61280,#61282,.T.); +#61280 = VERTEX_POINT('',#61281); +#61281 = CARTESIAN_POINT('',(1.172050016982,-0.25,0.232635182233)); +#61282 = CIRCLE('',#61283,0.1); +#61283 = AXIS2_PLACEMENT_3D('',#61284,#61285,#61286); +#61284 = CARTESIAN_POINT('',(1.270530792283,-0.25,0.25)); +#61285 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61286 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#61287 = ORIENTED_EDGE('',*,*,#61288,.T.); +#61288 = EDGE_CURVE('',#61280,#61289,#61291,.T.); +#61289 = VERTEX_POINT('',#61290); +#61290 = CARTESIAN_POINT('',(1.096201938253,-0.25,0.693412044417)); +#61291 = LINE('',#61292,#61293); +#61292 = CARTESIAN_POINT('',(1.172050016982,-0.25,0.232635182233)); +#61293 = VECTOR('',#61294,1.); +#61294 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#61295 = ORIENTED_EDGE('',*,*,#61296,.T.); +#61296 = EDGE_CURVE('',#61289,#61297,#61299,.T.); +#61297 = VERTEX_POINT('',#61298); +#61298 = CARTESIAN_POINT('',(0.85,-0.25,0.9)); +#61299 = CIRCLE('',#61300,0.25); +#61300 = AXIS2_PLACEMENT_3D('',#61301,#61302,#61303); +#61301 = CARTESIAN_POINT('',(0.85,-0.25,0.65)); +#61302 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61303 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#61304 = ORIENTED_EDGE('',*,*,#61305,.T.); +#61305 = EDGE_CURVE('',#61297,#59790,#61306,.T.); +#61306 = LINE('',#61307,#61308); +#61307 = CARTESIAN_POINT('',(0.85,-0.25,0.9)); +#61308 = VECTOR('',#61309,1.); +#61309 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61310 = PLANE('',#61311); +#61311 = AXIS2_PLACEMENT_3D('',#61312,#61313,#61314); +#61312 = CARTESIAN_POINT('',(1.069123385139,-0.25,0.441695635315)); +#61313 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61314 = DIRECTION('',(0.,0.,1.)); +#61315 = ADVANCED_FACE('',(#61316),#61332,.F.); +#61316 = FACE_BOUND('',#61317,.F.); +#61317 = EDGE_LOOP('',(#61318,#61324,#61325,#61331)); +#61318 = ORIENTED_EDGE('',*,*,#61319,.F.); +#61319 = EDGE_CURVE('',#59790,#60146,#61320,.T.); +#61320 = LINE('',#61321,#61322); +#61321 = CARTESIAN_POINT('',(0.85,-0.25,0.9)); +#61322 = VECTOR('',#61323,1.); +#61323 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61324 = ORIENTED_EDGE('',*,*,#59806,.T.); +#61325 = ORIENTED_EDGE('',*,*,#61326,.T.); +#61326 = EDGE_CURVE('',#59799,#60154,#61327,.T.); +#61327 = LINE('',#61328,#61329); +#61328 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#61329 = VECTOR('',#61330,1.); +#61330 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61331 = ORIENTED_EDGE('',*,*,#60153,.F.); +#61332 = PLANE('',#61333); +#61333 = AXIS2_PLACEMENT_3D('',#61334,#61335,#61336); +#61334 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#61335 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#61336 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#61337 = ADVANCED_FACE('',(#61338),#61424,.F.); +#61338 = FACE_BOUND('',#61339,.F.); +#61339 = EDGE_LOOP('',(#61340,#61341,#61342,#61351,#61359,#61368,#61376, + #61384,#61392,#61401,#61409,#61418)); +#61340 = ORIENTED_EDGE('',*,*,#59798,.F.); +#61341 = ORIENTED_EDGE('',*,*,#59820,.T.); +#61342 = ORIENTED_EDGE('',*,*,#61343,.T.); +#61343 = EDGE_CURVE('',#59821,#61344,#61346,.T.); +#61344 = VERTEX_POINT('',#61345); +#61345 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#61346 = CIRCLE('',#61347,0.1); +#61347 = AXIS2_PLACEMENT_3D('',#61348,#61349,#61350); +#61348 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#61349 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61350 = DIRECTION('',(0.,0.,1.)); +#61351 = ORIENTED_EDGE('',*,*,#61352,.T.); +#61352 = EDGE_CURVE('',#61344,#61353,#61355,.T.); +#61353 = VERTEX_POINT('',#61354); +#61354 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583)); +#61355 = LINE('',#61356,#61357); +#61356 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#61357 = VECTOR('',#61358,1.); +#61358 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#61359 = ORIENTED_EDGE('',*,*,#61360,.T.); +#61360 = EDGE_CURVE('',#61353,#61361,#61363,.T.); +#61361 = VERTEX_POINT('',#61362); +#61362 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#61363 = CIRCLE('',#61364,0.25); +#61364 = AXIS2_PLACEMENT_3D('',#61365,#61366,#61367); +#61365 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#61366 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61367 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#61368 = ORIENTED_EDGE('',*,*,#61369,.T.); +#61369 = EDGE_CURVE('',#61361,#61370,#61372,.T.); +#61370 = VERTEX_POINT('',#61371); +#61371 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#61372 = LINE('',#61373,#61374); +#61373 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#61374 = VECTOR('',#61375,1.); +#61375 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#61376 = ORIENTED_EDGE('',*,*,#61377,.T.); +#61377 = EDGE_CURVE('',#61370,#61378,#61380,.T.); +#61378 = VERTEX_POINT('',#61379); +#61379 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#61380 = LINE('',#61381,#61382); +#61381 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#61382 = VECTOR('',#61383,1.); +#61383 = DIRECTION('',(0.,0.,1.)); +#61384 = ORIENTED_EDGE('',*,*,#61385,.T.); +#61385 = EDGE_CURVE('',#61378,#61386,#61388,.T.); +#61386 = VERTEX_POINT('',#61387); +#61387 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15)); +#61388 = LINE('',#61389,#61390); +#61389 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#61390 = VECTOR('',#61391,1.); +#61391 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61392 = ORIENTED_EDGE('',*,*,#61393,.T.); +#61393 = EDGE_CURVE('',#61386,#61394,#61396,.T.); +#61394 = VERTEX_POINT('',#61395); +#61395 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#61396 = CIRCLE('',#61397,0.1); +#61397 = AXIS2_PLACEMENT_3D('',#61398,#61399,#61400); +#61398 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#61399 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61400 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#61401 = ORIENTED_EDGE('',*,*,#61402,.T.); +#61402 = EDGE_CURVE('',#61394,#61403,#61405,.T.); +#61403 = VERTEX_POINT('',#61404); +#61404 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417)); +#61405 = LINE('',#61406,#61407); +#61406 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#61407 = VECTOR('',#61408,1.); +#61408 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#61409 = ORIENTED_EDGE('',*,*,#61410,.T.); +#61410 = EDGE_CURVE('',#61403,#61411,#61413,.T.); +#61411 = VERTEX_POINT('',#61412); +#61412 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#61413 = CIRCLE('',#61414,0.25); +#61414 = AXIS2_PLACEMENT_3D('',#61415,#61416,#61417); +#61415 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#61416 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61417 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#61418 = ORIENTED_EDGE('',*,*,#61419,.T.); +#61419 = EDGE_CURVE('',#61411,#59799,#61420,.T.); +#61420 = LINE('',#61421,#61422); +#61421 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#61422 = VECTOR('',#61423,1.); +#61423 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61424 = PLANE('',#61425); +#61425 = AXIS2_PLACEMENT_3D('',#61426,#61427,#61428); +#61426 = CARTESIAN_POINT('',(1.069123385139,-0.7,0.441695635315)); +#61427 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61428 = DIRECTION('',(0.,0.,1.)); +#61429 = ADVANCED_FACE('',(#61430),#61449,.F.); +#61430 = FACE_BOUND('',#61431,.F.); +#61431 = EDGE_LOOP('',(#61432,#61433,#61442,#61448)); +#61432 = ORIENTED_EDGE('',*,*,#59837,.T.); +#61433 = ORIENTED_EDGE('',*,*,#61434,.T.); +#61434 = EDGE_CURVE('',#59830,#61435,#61437,.T.); +#61435 = VERTEX_POINT('',#61436); +#61436 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767)); +#61437 = CIRCLE('',#61438,0.1); +#61438 = AXIS2_PLACEMENT_3D('',#61439,#61440,#61441); +#61439 = CARTESIAN_POINT('',(0.85,-1.2,0.65)); +#61440 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61441 = DIRECTION('',(0.,0.,1.)); +#61442 = ORIENTED_EDGE('',*,*,#61443,.F.); +#61443 = EDGE_CURVE('',#61344,#61435,#61444,.T.); +#61444 = LINE('',#61445,#61446); +#61445 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#61446 = VECTOR('',#61447,1.); +#61447 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61448 = ORIENTED_EDGE('',*,*,#61343,.F.); +#61449 = CYLINDRICAL_SURFACE('',#61450,0.1); +#61450 = AXIS2_PLACEMENT_3D('',#61451,#61452,#61453); +#61451 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#61452 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61453 = DIRECTION('',(0.,0.,1.)); +#61454 = ADVANCED_FACE('',(#61455),#61533,.T.); +#61455 = FACE_BOUND('',#61456,.T.); +#61456 = EDGE_LOOP('',(#61457,#61458,#61459,#61460,#61468,#61477,#61485, + #61493,#61501,#61510,#61518,#61527)); +#61457 = ORIENTED_EDGE('',*,*,#59851,.F.); +#61458 = ORIENTED_EDGE('',*,*,#59829,.T.); +#61459 = ORIENTED_EDGE('',*,*,#61434,.T.); +#61460 = ORIENTED_EDGE('',*,*,#61461,.T.); +#61461 = EDGE_CURVE('',#61435,#61462,#61464,.T.); +#61462 = VERTEX_POINT('',#61463); +#61463 = CARTESIAN_POINT('',(1.02432885403,-1.2,0.206587955583)); +#61464 = LINE('',#61465,#61466); +#61465 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767)); +#61466 = VECTOR('',#61467,1.); +#61467 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#61468 = ORIENTED_EDGE('',*,*,#61469,.T.); +#61469 = EDGE_CURVE('',#61462,#61470,#61472,.T.); +#61470 = VERTEX_POINT('',#61471); +#61471 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.)); +#61472 = CIRCLE('',#61473,0.25); +#61473 = AXIS2_PLACEMENT_3D('',#61474,#61475,#61476); +#61474 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25)); +#61475 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61476 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#61477 = ORIENTED_EDGE('',*,*,#61478,.T.); +#61478 = EDGE_CURVE('',#61470,#61479,#61481,.T.); +#61479 = VERTEX_POINT('',#61480); +#61480 = CARTESIAN_POINT('',(1.4,-1.2,0.)); +#61481 = LINE('',#61482,#61483); +#61482 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.)); +#61483 = VECTOR('',#61484,1.); +#61484 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#61485 = ORIENTED_EDGE('',*,*,#61486,.T.); +#61486 = EDGE_CURVE('',#61479,#61487,#61489,.T.); +#61487 = VERTEX_POINT('',#61488); +#61488 = CARTESIAN_POINT('',(1.4,-1.2,0.15)); +#61489 = LINE('',#61490,#61491); +#61490 = CARTESIAN_POINT('',(1.4,-1.2,0.)); +#61491 = VECTOR('',#61492,1.); +#61492 = DIRECTION('',(0.,0.,1.)); +#61493 = ORIENTED_EDGE('',*,*,#61494,.T.); +#61494 = EDGE_CURVE('',#61487,#61495,#61497,.T.); +#61495 = VERTEX_POINT('',#61496); +#61496 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.15)); +#61497 = LINE('',#61498,#61499); +#61498 = CARTESIAN_POINT('',(1.4,-1.2,0.15)); +#61499 = VECTOR('',#61500,1.); +#61500 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61501 = ORIENTED_EDGE('',*,*,#61502,.T.); +#61502 = EDGE_CURVE('',#61495,#61503,#61505,.T.); +#61503 = VERTEX_POINT('',#61504); +#61504 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233)); +#61505 = CIRCLE('',#61506,0.1); +#61506 = AXIS2_PLACEMENT_3D('',#61507,#61508,#61509); +#61507 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25)); +#61508 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61509 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#61510 = ORIENTED_EDGE('',*,*,#61511,.T.); +#61511 = EDGE_CURVE('',#61503,#61512,#61514,.T.); +#61512 = VERTEX_POINT('',#61513); +#61513 = CARTESIAN_POINT('',(1.096201938253,-1.2,0.693412044417)); +#61514 = LINE('',#61515,#61516); +#61515 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233)); +#61516 = VECTOR('',#61517,1.); +#61517 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#61518 = ORIENTED_EDGE('',*,*,#61519,.T.); +#61519 = EDGE_CURVE('',#61512,#61520,#61522,.T.); +#61520 = VERTEX_POINT('',#61521); +#61521 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#61522 = CIRCLE('',#61523,0.25); +#61523 = AXIS2_PLACEMENT_3D('',#61524,#61525,#61526); +#61524 = CARTESIAN_POINT('',(0.85,-1.2,0.65)); +#61525 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61526 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#61527 = ORIENTED_EDGE('',*,*,#61528,.T.); +#61528 = EDGE_CURVE('',#61520,#59852,#61529,.T.); +#61529 = LINE('',#61530,#61531); +#61530 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#61531 = VECTOR('',#61532,1.); +#61532 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61533 = PLANE('',#61534); +#61534 = AXIS2_PLACEMENT_3D('',#61535,#61536,#61537); +#61535 = CARTESIAN_POINT('',(1.069123385139,-1.2,0.441695635315)); +#61536 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61537 = DIRECTION('',(0.,0.,1.)); +#61538 = ADVANCED_FACE('',(#61539),#61550,.T.); +#61539 = FACE_BOUND('',#61540,.T.); +#61540 = EDGE_LOOP('',(#61541,#61542,#61543,#61544)); +#61541 = ORIENTED_EDGE('',*,*,#60796,.T.); +#61542 = ORIENTED_EDGE('',*,*,#59952,.T.); +#61543 = ORIENTED_EDGE('',*,*,#60898,.F.); +#61544 = ORIENTED_EDGE('',*,*,#61545,.F.); +#61545 = EDGE_CURVE('',#60789,#60891,#61546,.T.); +#61546 = LINE('',#61547,#61548); +#61547 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417)); +#61548 = VECTOR('',#61549,1.); +#61549 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61550 = CYLINDRICAL_SURFACE('',#61551,0.25); +#61551 = AXIS2_PLACEMENT_3D('',#61552,#61553,#61554); +#61552 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#61553 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#61554 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#61555 = ADVANCED_FACE('',(#61556),#61569,.F.); +#61556 = FACE_BOUND('',#61557,.F.); +#61557 = EDGE_LOOP('',(#61558,#61559,#61565,#61566,#61567,#61568)); +#61558 = ORIENTED_EDGE('',*,*,#60364,.F.); +#61559 = ORIENTED_EDGE('',*,*,#61560,.T.); +#61560 = EDGE_CURVE('',#60356,#60465,#61561,.T.); +#61561 = LINE('',#61562,#61563); +#61562 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#61563 = VECTOR('',#61564,1.); +#61564 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61565 = ORIENTED_EDGE('',*,*,#60473,.T.); +#61566 = ORIENTED_EDGE('',*,*,#60495,.T.); +#61567 = ORIENTED_EDGE('',*,*,#59999,.F.); +#61568 = ORIENTED_EDGE('',*,*,#60238,.F.); +#61569 = PLANE('',#61570); +#61570 = AXIS2_PLACEMENT_3D('',#61571,#61572,#61573); +#61571 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#61572 = DIRECTION('',(0.,0.,-1.)); +#61573 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#61574 = ADVANCED_FACE('',(#61575),#61588,.F.); +#61575 = FACE_BOUND('',#61576,.F.); +#61576 = EDGE_LOOP('',(#61577,#61578,#61584,#61585,#61586,#61587)); +#61577 = ORIENTED_EDGE('',*,*,#60587,.F.); +#61578 = ORIENTED_EDGE('',*,*,#61579,.T.); +#61579 = EDGE_CURVE('',#60579,#60688,#61580,.T.); +#61580 = LINE('',#61581,#61582); +#61581 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#61582 = VECTOR('',#61583,1.); +#61583 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61584 = ORIENTED_EDGE('',*,*,#60696,.T.); +#61585 = ORIENTED_EDGE('',*,*,#60713,.T.); +#61586 = ORIENTED_EDGE('',*,*,#60015,.F.); +#61587 = ORIENTED_EDGE('',*,*,#60488,.F.); +#61588 = PLANE('',#61589); +#61589 = AXIS2_PLACEMENT_3D('',#61590,#61591,#61592); +#61590 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#61591 = DIRECTION('',(0.,0.,-1.)); +#61592 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#61593 = ADVANCED_FACE('',(#61594,#61623),#61634,.T.); +#61594 = FACE_BOUND('',#61595,.T.); +#61595 = EDGE_LOOP('',(#61596,#61597,#61598,#61599,#61607,#61615,#61621, + #61622)); +#61596 = ORIENTED_EDGE('',*,*,#60090,.F.); +#61597 = ORIENTED_EDGE('',*,*,#60067,.F.); +#61598 = ORIENTED_EDGE('',*,*,#60038,.F.); +#61599 = ORIENTED_EDGE('',*,*,#61600,.F.); +#61600 = EDGE_CURVE('',#61601,#60039,#61603,.T.); +#61601 = VERTEX_POINT('',#61602); +#61602 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#61603 = LINE('',#61604,#61605); +#61604 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#61605 = VECTOR('',#61606,1.); +#61606 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#61607 = ORIENTED_EDGE('',*,*,#61608,.F.); +#61608 = EDGE_CURVE('',#61609,#61601,#61611,.T.); +#61609 = VERTEX_POINT('',#61610); +#61610 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#61611 = LINE('',#61612,#61613); +#61612 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#61613 = VECTOR('',#61614,1.); +#61614 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#61615 = ORIENTED_EDGE('',*,*,#61616,.F.); +#61616 = EDGE_CURVE('',#60178,#61609,#61617,.T.); +#61617 = LINE('',#61618,#61619); +#61618 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#61619 = VECTOR('',#61620,1.); +#61620 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#61621 = ORIENTED_EDGE('',*,*,#60184,.F.); +#61622 = ORIENTED_EDGE('',*,*,#60113,.F.); +#61623 = FACE_BOUND('',#61624,.T.); +#61624 = EDGE_LOOP('',(#61625)); +#61625 = ORIENTED_EDGE('',*,*,#61626,.T.); +#61626 = EDGE_CURVE('',#61627,#61627,#61629,.T.); +#61627 = VERTEX_POINT('',#61628); +#61628 = CARTESIAN_POINT('',(-0.333648457443,0.858648457443,1.55)); +#61629 = CIRCLE('',#61630,0.125); +#61630 = AXIS2_PLACEMENT_3D('',#61631,#61632,#61633); +#61631 = CARTESIAN_POINT('',(-0.333648457443,0.983648457443,1.55)); +#61632 = DIRECTION('',(0.,-0.,-1.)); +#61633 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61634 = PLANE('',#61635); +#61635 = AXIS2_PLACEMENT_3D('',#61636,#61637,#61638); +#61636 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#61637 = DIRECTION('',(0.,0.,1.)); +#61638 = DIRECTION('',(0.436386464522,-0.899759330922,0.)); +#61639 = ADVANCED_FACE('',(#61640),#61650,.F.); +#61640 = FACE_BOUND('',#61641,.F.); +#61641 = EDGE_LOOP('',(#61642,#61643,#61644,#61645)); +#61642 = ORIENTED_EDGE('',*,*,#60245,.T.); +#61643 = ORIENTED_EDGE('',*,*,#60046,.T.); +#61644 = ORIENTED_EDGE('',*,*,#61600,.F.); +#61645 = ORIENTED_EDGE('',*,*,#61646,.F.); +#61646 = EDGE_CURVE('',#60246,#61601,#61647,.T.); +#61647 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61648,#61649),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#61648 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#61649 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#61650 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#61651,#61652) + ,(#61653,#61654 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#61651 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#61652 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#61653 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#61654 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#61655 = ADVANCED_FACE('',(#61656),#61669,.F.); +#61656 = FACE_BOUND('',#61657,.F.); +#61657 = EDGE_LOOP('',(#61658,#61659,#61665,#61666,#61667,#61668)); +#61658 = ORIENTED_EDGE('',*,*,#61196,.F.); +#61659 = ORIENTED_EDGE('',*,*,#61660,.T.); +#61660 = EDGE_CURVE('',#61188,#61297,#61661,.T.); +#61661 = LINE('',#61662,#61663); +#61662 = CARTESIAN_POINT('',(0.85,0.25,0.9)); +#61663 = VECTOR('',#61664,1.); +#61664 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61665 = ORIENTED_EDGE('',*,*,#61305,.T.); +#61666 = ORIENTED_EDGE('',*,*,#61319,.T.); +#61667 = ORIENTED_EDGE('',*,*,#60145,.F.); +#61668 = ORIENTED_EDGE('',*,*,#61103,.F.); +#61669 = PLANE('',#61670); +#61670 = AXIS2_PLACEMENT_3D('',#61671,#61672,#61673); +#61671 = CARTESIAN_POINT('',(0.85,0.25,0.9)); +#61672 = DIRECTION('',(0.,0.,-1.)); +#61673 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#61674 = ADVANCED_FACE('',(#61675),#61688,.F.); +#61675 = FACE_BOUND('',#61676,.F.); +#61676 = EDGE_LOOP('',(#61677,#61678,#61684,#61685,#61686,#61687)); +#61677 = ORIENTED_EDGE('',*,*,#61419,.F.); +#61678 = ORIENTED_EDGE('',*,*,#61679,.T.); +#61679 = EDGE_CURVE('',#61411,#61520,#61680,.T.); +#61680 = LINE('',#61681,#61682); +#61681 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#61682 = VECTOR('',#61683,1.); +#61683 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61684 = ORIENTED_EDGE('',*,*,#61528,.T.); +#61685 = ORIENTED_EDGE('',*,*,#60268,.T.); +#61686 = ORIENTED_EDGE('',*,*,#60161,.F.); +#61687 = ORIENTED_EDGE('',*,*,#61326,.F.); +#61688 = PLANE('',#61689); +#61689 = AXIS2_PLACEMENT_3D('',#61690,#61691,#61692); +#61690 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#61691 = DIRECTION('',(0.,0.,-1.)); +#61692 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#61693 = ADVANCED_FACE('',(#61694),#61704,.F.); +#61694 = FACE_BOUND('',#61695,.F.); +#61695 = EDGE_LOOP('',(#61696,#61697,#61702,#61703)); +#61696 = ORIENTED_EDGE('',*,*,#60261,.T.); +#61697 = ORIENTED_EDGE('',*,*,#61698,.T.); +#61698 = EDGE_CURVE('',#60254,#61609,#61699,.T.); +#61699 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61700,#61701),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#61700 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#61701 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#61702 = ORIENTED_EDGE('',*,*,#61616,.F.); +#61703 = ORIENTED_EDGE('',*,*,#60177,.F.); +#61704 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#61705,#61706) + ,(#61707,#61708 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#61705 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#61706 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#61707 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#61708 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#61709 = ADVANCED_FACE('',(#61710),#61721,.T.); +#61710 = FACE_BOUND('',#61711,.T.); +#61711 = EDGE_LOOP('',(#61712,#61713,#61714,#61715)); +#61712 = ORIENTED_EDGE('',*,*,#60983,.T.); +#61713 = ORIENTED_EDGE('',*,*,#60207,.T.); +#61714 = ORIENTED_EDGE('',*,*,#61085,.F.); +#61715 = ORIENTED_EDGE('',*,*,#61716,.F.); +#61716 = EDGE_CURVE('',#60976,#61078,#61717,.T.); +#61717 = LINE('',#61718,#61719); +#61718 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417)); +#61719 = VECTOR('',#61720,1.); +#61720 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#61721 = CYLINDRICAL_SURFACE('',#61722,0.25); +#61722 = AXIS2_PLACEMENT_3D('',#61723,#61724,#61725); +#61723 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#61724 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#61725 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#61726 = ADVANCED_FACE('',(#61727),#61733,.F.); +#61727 = FACE_BOUND('',#61728,.F.); +#61728 = EDGE_LOOP('',(#61729,#61730,#61731,#61732)); +#61729 = ORIENTED_EDGE('',*,*,#60253,.T.); +#61730 = ORIENTED_EDGE('',*,*,#61646,.T.); +#61731 = ORIENTED_EDGE('',*,*,#61608,.F.); +#61732 = ORIENTED_EDGE('',*,*,#61698,.F.); +#61733 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#61734,#61735) + ,(#61736,#61737 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#61734 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#61735 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#61736 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#61737 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#61738 = ADVANCED_FACE('',(#61739),#61750,.T.); +#61739 = FACE_BOUND('',#61740,.T.); +#61740 = EDGE_LOOP('',(#61741,#61742,#61743,#61744)); +#61741 = ORIENTED_EDGE('',*,*,#60355,.T.); +#61742 = ORIENTED_EDGE('',*,*,#61560,.T.); +#61743 = ORIENTED_EDGE('',*,*,#60464,.F.); +#61744 = ORIENTED_EDGE('',*,*,#61745,.F.); +#61745 = EDGE_CURVE('',#60348,#60457,#61746,.T.); +#61746 = LINE('',#61747,#61748); +#61747 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417)); +#61748 = VECTOR('',#61749,1.); +#61749 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61750 = CYLINDRICAL_SURFACE('',#61751,0.25); +#61751 = AXIS2_PLACEMENT_3D('',#61752,#61753,#61754); +#61752 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#61753 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#61754 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#61755 = ADVANCED_FACE('',(#61756),#61767,.F.); +#61756 = FACE_BOUND('',#61757,.F.); +#61757 = EDGE_LOOP('',(#61758,#61764,#61765,#61766)); +#61758 = ORIENTED_EDGE('',*,*,#61759,.T.); +#61759 = EDGE_CURVE('',#60339,#60448,#61760,.T.); +#61760 = LINE('',#61761,#61762); +#61761 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#61762 = VECTOR('',#61763,1.); +#61763 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61764 = ORIENTED_EDGE('',*,*,#60456,.T.); +#61765 = ORIENTED_EDGE('',*,*,#61745,.F.); +#61766 = ORIENTED_EDGE('',*,*,#60347,.F.); +#61767 = PLANE('',#61768); +#61768 = AXIS2_PLACEMENT_3D('',#61769,#61770,#61771); +#61769 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#61770 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#61771 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#61772 = ADVANCED_FACE('',(#61773),#61784,.F.); +#61773 = FACE_BOUND('',#61774,.F.); +#61774 = EDGE_LOOP('',(#61775,#61781,#61782,#61783)); +#61775 = ORIENTED_EDGE('',*,*,#61776,.T.); +#61776 = EDGE_CURVE('',#60331,#60440,#61777,.T.); +#61777 = LINE('',#61778,#61779); +#61778 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15)); +#61779 = VECTOR('',#61780,1.); +#61780 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61781 = ORIENTED_EDGE('',*,*,#60447,.T.); +#61782 = ORIENTED_EDGE('',*,*,#61759,.F.); +#61783 = ORIENTED_EDGE('',*,*,#60338,.F.); +#61784 = CYLINDRICAL_SURFACE('',#61785,0.1); +#61785 = AXIS2_PLACEMENT_3D('',#61786,#61787,#61788); +#61786 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#61787 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#61788 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#61789 = ADVANCED_FACE('',(#61790),#61801,.F.); +#61790 = FACE_BOUND('',#61791,.F.); +#61791 = EDGE_LOOP('',(#61792,#61798,#61799,#61800)); +#61792 = ORIENTED_EDGE('',*,*,#61793,.T.); +#61793 = EDGE_CURVE('',#60323,#60432,#61794,.T.); +#61794 = LINE('',#61795,#61796); +#61795 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#61796 = VECTOR('',#61797,1.); +#61797 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61798 = ORIENTED_EDGE('',*,*,#60439,.T.); +#61799 = ORIENTED_EDGE('',*,*,#61776,.F.); +#61800 = ORIENTED_EDGE('',*,*,#60330,.F.); +#61801 = PLANE('',#61802); +#61802 = AXIS2_PLACEMENT_3D('',#61803,#61804,#61805); +#61803 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#61804 = DIRECTION('',(0.,0.,-1.)); +#61805 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#61806 = ADVANCED_FACE('',(#61807),#61818,.F.); +#61807 = FACE_BOUND('',#61808,.F.); +#61808 = EDGE_LOOP('',(#61809,#61815,#61816,#61817)); +#61809 = ORIENTED_EDGE('',*,*,#61810,.T.); +#61810 = EDGE_CURVE('',#60315,#60424,#61811,.T.); +#61811 = LINE('',#61812,#61813); +#61812 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#61813 = VECTOR('',#61814,1.); +#61814 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61815 = ORIENTED_EDGE('',*,*,#60431,.T.); +#61816 = ORIENTED_EDGE('',*,*,#61793,.F.); +#61817 = ORIENTED_EDGE('',*,*,#60322,.F.); +#61818 = PLANE('',#61819); +#61819 = AXIS2_PLACEMENT_3D('',#61820,#61821,#61822); +#61820 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#61821 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#61822 = DIRECTION('',(0.,0.,1.)); +#61823 = ADVANCED_FACE('',(#61824),#61835,.F.); +#61824 = FACE_BOUND('',#61825,.F.); +#61825 = EDGE_LOOP('',(#61826,#61832,#61833,#61834)); +#61826 = ORIENTED_EDGE('',*,*,#61827,.T.); +#61827 = EDGE_CURVE('',#60306,#60415,#61828,.T.); +#61828 = LINE('',#61829,#61830); +#61829 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#61830 = VECTOR('',#61831,1.); +#61831 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61832 = ORIENTED_EDGE('',*,*,#60423,.T.); +#61833 = ORIENTED_EDGE('',*,*,#61810,.F.); +#61834 = ORIENTED_EDGE('',*,*,#60314,.F.); +#61835 = PLANE('',#61836); +#61836 = AXIS2_PLACEMENT_3D('',#61837,#61838,#61839); +#61837 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#61838 = DIRECTION('',(0.,0.,1.)); +#61839 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#61840 = ADVANCED_FACE('',(#61841),#61852,.T.); +#61841 = FACE_BOUND('',#61842,.T.); +#61842 = EDGE_LOOP('',(#61843,#61844,#61845,#61846)); +#61843 = ORIENTED_EDGE('',*,*,#60305,.T.); +#61844 = ORIENTED_EDGE('',*,*,#61827,.T.); +#61845 = ORIENTED_EDGE('',*,*,#60414,.F.); +#61846 = ORIENTED_EDGE('',*,*,#61847,.F.); +#61847 = EDGE_CURVE('',#60298,#60407,#61848,.T.); +#61848 = LINE('',#61849,#61850); +#61849 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583)); +#61850 = VECTOR('',#61851,1.); +#61851 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61852 = CYLINDRICAL_SURFACE('',#61853,0.25); +#61853 = AXIS2_PLACEMENT_3D('',#61854,#61855,#61856); +#61854 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#61855 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#61856 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#61857 = ADVANCED_FACE('',(#61858),#61864,.F.); +#61858 = FACE_BOUND('',#61859,.F.); +#61859 = EDGE_LOOP('',(#61860,#61861,#61862,#61863)); +#61860 = ORIENTED_EDGE('',*,*,#60388,.T.); +#61861 = ORIENTED_EDGE('',*,*,#60406,.T.); +#61862 = ORIENTED_EDGE('',*,*,#61847,.F.); +#61863 = ORIENTED_EDGE('',*,*,#60297,.F.); +#61864 = PLANE('',#61865); +#61865 = AXIS2_PLACEMENT_3D('',#61866,#61867,#61868); +#61866 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#61867 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#61868 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#61869 = ADVANCED_FACE('',(#61870),#61881,.T.); +#61870 = FACE_BOUND('',#61871,.T.); +#61871 = EDGE_LOOP('',(#61872,#61873,#61874,#61875)); +#61872 = ORIENTED_EDGE('',*,*,#60578,.T.); +#61873 = ORIENTED_EDGE('',*,*,#61579,.T.); +#61874 = ORIENTED_EDGE('',*,*,#60687,.F.); +#61875 = ORIENTED_EDGE('',*,*,#61876,.F.); +#61876 = EDGE_CURVE('',#60571,#60680,#61877,.T.); +#61877 = LINE('',#61878,#61879); +#61878 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417)); +#61879 = VECTOR('',#61880,1.); +#61880 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61881 = CYLINDRICAL_SURFACE('',#61882,0.25); +#61882 = AXIS2_PLACEMENT_3D('',#61883,#61884,#61885); +#61883 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#61884 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#61885 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667 + )); +#61886 = ADVANCED_FACE('',(#61887),#61898,.F.); +#61887 = FACE_BOUND('',#61888,.F.); +#61888 = EDGE_LOOP('',(#61889,#61895,#61896,#61897)); +#61889 = ORIENTED_EDGE('',*,*,#61890,.T.); +#61890 = EDGE_CURVE('',#60562,#60671,#61891,.T.); +#61891 = LINE('',#61892,#61893); +#61892 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#61893 = VECTOR('',#61894,1.); +#61894 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61895 = ORIENTED_EDGE('',*,*,#60679,.T.); +#61896 = ORIENTED_EDGE('',*,*,#61876,.F.); +#61897 = ORIENTED_EDGE('',*,*,#60570,.F.); +#61898 = PLANE('',#61899); +#61899 = AXIS2_PLACEMENT_3D('',#61900,#61901,#61902); +#61900 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#61901 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#61902 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#61903 = ADVANCED_FACE('',(#61904),#61915,.F.); +#61904 = FACE_BOUND('',#61905,.F.); +#61905 = EDGE_LOOP('',(#61906,#61912,#61913,#61914)); +#61906 = ORIENTED_EDGE('',*,*,#61907,.T.); +#61907 = EDGE_CURVE('',#60554,#60663,#61908,.T.); +#61908 = LINE('',#61909,#61910); +#61909 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15)); +#61910 = VECTOR('',#61911,1.); +#61911 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61912 = ORIENTED_EDGE('',*,*,#60670,.T.); +#61913 = ORIENTED_EDGE('',*,*,#61890,.F.); +#61914 = ORIENTED_EDGE('',*,*,#60561,.F.); +#61915 = CYLINDRICAL_SURFACE('',#61916,0.1); +#61916 = AXIS2_PLACEMENT_3D('',#61917,#61918,#61919); +#61917 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#61918 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#61919 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#61920 = ADVANCED_FACE('',(#61921),#61932,.F.); +#61921 = FACE_BOUND('',#61922,.F.); +#61922 = EDGE_LOOP('',(#61923,#61929,#61930,#61931)); +#61923 = ORIENTED_EDGE('',*,*,#61924,.T.); +#61924 = EDGE_CURVE('',#60546,#60655,#61925,.T.); +#61925 = LINE('',#61926,#61927); +#61926 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#61927 = VECTOR('',#61928,1.); +#61928 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61929 = ORIENTED_EDGE('',*,*,#60662,.T.); +#61930 = ORIENTED_EDGE('',*,*,#61907,.F.); +#61931 = ORIENTED_EDGE('',*,*,#60553,.F.); +#61932 = PLANE('',#61933); +#61933 = AXIS2_PLACEMENT_3D('',#61934,#61935,#61936); +#61934 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#61935 = DIRECTION('',(0.,0.,-1.)); +#61936 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#61937 = ADVANCED_FACE('',(#61938),#61949,.F.); +#61938 = FACE_BOUND('',#61939,.F.); +#61939 = EDGE_LOOP('',(#61940,#61946,#61947,#61948)); +#61940 = ORIENTED_EDGE('',*,*,#61941,.T.); +#61941 = EDGE_CURVE('',#60538,#60647,#61942,.T.); +#61942 = LINE('',#61943,#61944); +#61943 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#61944 = VECTOR('',#61945,1.); +#61945 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61946 = ORIENTED_EDGE('',*,*,#60654,.T.); +#61947 = ORIENTED_EDGE('',*,*,#61924,.F.); +#61948 = ORIENTED_EDGE('',*,*,#60545,.F.); +#61949 = PLANE('',#61950); +#61950 = AXIS2_PLACEMENT_3D('',#61951,#61952,#61953); +#61951 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#61952 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#61953 = DIRECTION('',(0.,0.,1.)); +#61954 = ADVANCED_FACE('',(#61955),#61966,.F.); +#61955 = FACE_BOUND('',#61956,.F.); +#61956 = EDGE_LOOP('',(#61957,#61963,#61964,#61965)); +#61957 = ORIENTED_EDGE('',*,*,#61958,.T.); +#61958 = EDGE_CURVE('',#60529,#60638,#61959,.T.); +#61959 = LINE('',#61960,#61961); +#61960 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#61961 = VECTOR('',#61962,1.); +#61962 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61963 = ORIENTED_EDGE('',*,*,#60646,.T.); +#61964 = ORIENTED_EDGE('',*,*,#61941,.F.); +#61965 = ORIENTED_EDGE('',*,*,#60537,.F.); +#61966 = PLANE('',#61967); +#61967 = AXIS2_PLACEMENT_3D('',#61968,#61969,#61970); +#61968 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#61969 = DIRECTION('',(0.,0.,1.)); +#61970 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#61971 = ADVANCED_FACE('',(#61972),#61983,.T.); +#61972 = FACE_BOUND('',#61973,.T.); +#61973 = EDGE_LOOP('',(#61974,#61975,#61976,#61977)); +#61974 = ORIENTED_EDGE('',*,*,#60528,.T.); +#61975 = ORIENTED_EDGE('',*,*,#61958,.T.); +#61976 = ORIENTED_EDGE('',*,*,#60637,.F.); +#61977 = ORIENTED_EDGE('',*,*,#61978,.F.); +#61978 = EDGE_CURVE('',#60521,#60630,#61979,.T.); +#61979 = LINE('',#61980,#61981); +#61980 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583)); +#61981 = VECTOR('',#61982,1.); +#61982 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#61983 = CYLINDRICAL_SURFACE('',#61984,0.25); +#61984 = AXIS2_PLACEMENT_3D('',#61985,#61986,#61987); +#61985 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#61986 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#61987 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#61988 = ADVANCED_FACE('',(#61989),#61995,.F.); +#61989 = FACE_BOUND('',#61990,.F.); +#61990 = EDGE_LOOP('',(#61991,#61992,#61993,#61994)); +#61991 = ORIENTED_EDGE('',*,*,#60611,.T.); +#61992 = ORIENTED_EDGE('',*,*,#60629,.T.); +#61993 = ORIENTED_EDGE('',*,*,#61978,.F.); +#61994 = ORIENTED_EDGE('',*,*,#60520,.F.); +#61995 = PLANE('',#61996); +#61996 = AXIS2_PLACEMENT_3D('',#61997,#61998,#61999); +#61997 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#61998 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#61999 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#62000 = ADVANCED_FACE('',(#62001),#62012,.F.); +#62001 = FACE_BOUND('',#62002,.F.); +#62002 = EDGE_LOOP('',(#62003,#62009,#62010,#62011)); +#62003 = ORIENTED_EDGE('',*,*,#62004,.T.); +#62004 = EDGE_CURVE('',#60780,#60882,#62005,.T.); +#62005 = LINE('',#62006,#62007); +#62006 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#62007 = VECTOR('',#62008,1.); +#62008 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#62009 = ORIENTED_EDGE('',*,*,#60890,.T.); +#62010 = ORIENTED_EDGE('',*,*,#61545,.F.); +#62011 = ORIENTED_EDGE('',*,*,#60788,.F.); +#62012 = PLANE('',#62013); +#62013 = AXIS2_PLACEMENT_3D('',#62014,#62015,#62016); +#62014 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#62015 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#62016 = DIRECTION('',(0.162423314012,-1.858508865964E-18,0.986721169868 + )); +#62017 = ADVANCED_FACE('',(#62018),#62029,.F.); +#62018 = FACE_BOUND('',#62019,.F.); +#62019 = EDGE_LOOP('',(#62020,#62026,#62027,#62028)); +#62020 = ORIENTED_EDGE('',*,*,#62021,.T.); +#62021 = EDGE_CURVE('',#60772,#60874,#62022,.T.); +#62022 = LINE('',#62023,#62024); +#62023 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15)); +#62024 = VECTOR('',#62025,1.); +#62025 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#62026 = ORIENTED_EDGE('',*,*,#60881,.T.); +#62027 = ORIENTED_EDGE('',*,*,#62004,.F.); +#62028 = ORIENTED_EDGE('',*,*,#60779,.F.); +#62029 = CYLINDRICAL_SURFACE('',#62030,0.1); +#62030 = AXIS2_PLACEMENT_3D('',#62031,#62032,#62033); +#62031 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#62032 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#62033 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#62034 = ADVANCED_FACE('',(#62035),#62046,.F.); +#62035 = FACE_BOUND('',#62036,.F.); +#62036 = EDGE_LOOP('',(#62037,#62043,#62044,#62045)); +#62037 = ORIENTED_EDGE('',*,*,#62038,.T.); +#62038 = EDGE_CURVE('',#60764,#60866,#62039,.T.); +#62039 = LINE('',#62040,#62041); +#62040 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#62041 = VECTOR('',#62042,1.); +#62042 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#62043 = ORIENTED_EDGE('',*,*,#60873,.T.); +#62044 = ORIENTED_EDGE('',*,*,#62021,.F.); +#62045 = ORIENTED_EDGE('',*,*,#60771,.F.); +#62046 = PLANE('',#62047); +#62047 = AXIS2_PLACEMENT_3D('',#62048,#62049,#62050); +#62048 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#62049 = DIRECTION('',(0.,0.,-1.)); +#62050 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#62051 = ADVANCED_FACE('',(#62052),#62063,.F.); +#62052 = FACE_BOUND('',#62053,.F.); +#62053 = EDGE_LOOP('',(#62054,#62060,#62061,#62062)); +#62054 = ORIENTED_EDGE('',*,*,#62055,.T.); +#62055 = EDGE_CURVE('',#60756,#60858,#62056,.T.); +#62056 = LINE('',#62057,#62058); +#62057 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#62058 = VECTOR('',#62059,1.); +#62059 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#62060 = ORIENTED_EDGE('',*,*,#60865,.T.); +#62061 = ORIENTED_EDGE('',*,*,#62038,.F.); +#62062 = ORIENTED_EDGE('',*,*,#60763,.F.); +#62063 = PLANE('',#62064); +#62064 = AXIS2_PLACEMENT_3D('',#62065,#62066,#62067); +#62065 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#62066 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#62067 = DIRECTION('',(0.,0.,1.)); +#62068 = ADVANCED_FACE('',(#62069),#62080,.F.); +#62069 = FACE_BOUND('',#62070,.F.); +#62070 = EDGE_LOOP('',(#62071,#62077,#62078,#62079)); +#62071 = ORIENTED_EDGE('',*,*,#62072,.T.); +#62072 = EDGE_CURVE('',#60747,#60849,#62073,.T.); +#62073 = LINE('',#62074,#62075); +#62074 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#62075 = VECTOR('',#62076,1.); +#62076 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#62077 = ORIENTED_EDGE('',*,*,#60857,.T.); +#62078 = ORIENTED_EDGE('',*,*,#62055,.F.); +#62079 = ORIENTED_EDGE('',*,*,#60755,.F.); +#62080 = PLANE('',#62081); +#62081 = AXIS2_PLACEMENT_3D('',#62082,#62083,#62084); +#62082 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#62083 = DIRECTION('',(0.,0.,1.)); +#62084 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#62085 = ADVANCED_FACE('',(#62086),#62097,.T.); +#62086 = FACE_BOUND('',#62087,.T.); +#62087 = EDGE_LOOP('',(#62088,#62089,#62090,#62091)); +#62088 = ORIENTED_EDGE('',*,*,#60746,.T.); +#62089 = ORIENTED_EDGE('',*,*,#62072,.T.); +#62090 = ORIENTED_EDGE('',*,*,#60848,.F.); +#62091 = ORIENTED_EDGE('',*,*,#62092,.F.); +#62092 = EDGE_CURVE('',#60739,#60841,#62093,.T.); +#62093 = LINE('',#62094,#62095); +#62094 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583)); +#62095 = VECTOR('',#62096,1.); +#62096 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#62097 = CYLINDRICAL_SURFACE('',#62098,0.25); +#62098 = AXIS2_PLACEMENT_3D('',#62099,#62100,#62101); +#62099 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#62100 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#62101 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#62102 = ADVANCED_FACE('',(#62103),#62109,.F.); +#62103 = FACE_BOUND('',#62104,.F.); +#62104 = EDGE_LOOP('',(#62105,#62106,#62107,#62108)); +#62105 = ORIENTED_EDGE('',*,*,#60822,.T.); +#62106 = ORIENTED_EDGE('',*,*,#60840,.T.); +#62107 = ORIENTED_EDGE('',*,*,#62092,.F.); +#62108 = ORIENTED_EDGE('',*,*,#60738,.F.); +#62109 = PLANE('',#62110); +#62110 = AXIS2_PLACEMENT_3D('',#62111,#62112,#62113); +#62111 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#62112 = DIRECTION('',(-0.986721169868,1.129043606572E-17,0.162423314012 + )); +#62113 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#62114 = ADVANCED_FACE('',(#62115),#62126,.F.); +#62115 = FACE_BOUND('',#62116,.F.); +#62116 = EDGE_LOOP('',(#62117,#62123,#62124,#62125)); +#62117 = ORIENTED_EDGE('',*,*,#62118,.T.); +#62118 = EDGE_CURVE('',#60967,#61069,#62119,.T.); +#62119 = LINE('',#62120,#62121); +#62120 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#62121 = VECTOR('',#62122,1.); +#62122 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62123 = ORIENTED_EDGE('',*,*,#61077,.T.); +#62124 = ORIENTED_EDGE('',*,*,#61716,.F.); +#62125 = ORIENTED_EDGE('',*,*,#60975,.F.); +#62126 = PLANE('',#62127); +#62127 = AXIS2_PLACEMENT_3D('',#62128,#62129,#62130); +#62128 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#62129 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#62130 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#62131 = ADVANCED_FACE('',(#62132),#62143,.F.); +#62132 = FACE_BOUND('',#62133,.F.); +#62133 = EDGE_LOOP('',(#62134,#62140,#62141,#62142)); +#62134 = ORIENTED_EDGE('',*,*,#62135,.T.); +#62135 = EDGE_CURVE('',#60959,#61061,#62136,.T.); +#62136 = LINE('',#62137,#62138); +#62137 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15)); +#62138 = VECTOR('',#62139,1.); +#62139 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62140 = ORIENTED_EDGE('',*,*,#61068,.T.); +#62141 = ORIENTED_EDGE('',*,*,#62118,.F.); +#62142 = ORIENTED_EDGE('',*,*,#60966,.F.); +#62143 = CYLINDRICAL_SURFACE('',#62144,0.1); +#62144 = AXIS2_PLACEMENT_3D('',#62145,#62146,#62147); +#62145 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#62146 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#62147 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#62148 = ADVANCED_FACE('',(#62149),#62160,.F.); +#62149 = FACE_BOUND('',#62150,.F.); +#62150 = EDGE_LOOP('',(#62151,#62157,#62158,#62159)); +#62151 = ORIENTED_EDGE('',*,*,#62152,.T.); +#62152 = EDGE_CURVE('',#60951,#61053,#62153,.T.); +#62153 = LINE('',#62154,#62155); +#62154 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#62155 = VECTOR('',#62156,1.); +#62156 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62157 = ORIENTED_EDGE('',*,*,#61060,.T.); +#62158 = ORIENTED_EDGE('',*,*,#62135,.F.); +#62159 = ORIENTED_EDGE('',*,*,#60958,.F.); +#62160 = PLANE('',#62161); +#62161 = AXIS2_PLACEMENT_3D('',#62162,#62163,#62164); +#62162 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#62163 = DIRECTION('',(0.,0.,-1.)); +#62164 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#62165 = ADVANCED_FACE('',(#62166),#62177,.F.); +#62166 = FACE_BOUND('',#62167,.F.); +#62167 = EDGE_LOOP('',(#62168,#62174,#62175,#62176)); +#62168 = ORIENTED_EDGE('',*,*,#62169,.T.); +#62169 = EDGE_CURVE('',#60943,#61045,#62170,.T.); +#62170 = LINE('',#62171,#62172); +#62171 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#62172 = VECTOR('',#62173,1.); +#62173 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62174 = ORIENTED_EDGE('',*,*,#61052,.T.); +#62175 = ORIENTED_EDGE('',*,*,#62152,.F.); +#62176 = ORIENTED_EDGE('',*,*,#60950,.F.); +#62177 = PLANE('',#62178); +#62178 = AXIS2_PLACEMENT_3D('',#62179,#62180,#62181); +#62179 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#62180 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#62181 = DIRECTION('',(0.,0.,1.)); +#62182 = ADVANCED_FACE('',(#62183),#62194,.F.); +#62183 = FACE_BOUND('',#62184,.F.); +#62184 = EDGE_LOOP('',(#62185,#62191,#62192,#62193)); +#62185 = ORIENTED_EDGE('',*,*,#62186,.T.); +#62186 = EDGE_CURVE('',#60934,#61036,#62187,.T.); +#62187 = LINE('',#62188,#62189); +#62188 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#62189 = VECTOR('',#62190,1.); +#62190 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62191 = ORIENTED_EDGE('',*,*,#61044,.T.); +#62192 = ORIENTED_EDGE('',*,*,#62169,.F.); +#62193 = ORIENTED_EDGE('',*,*,#60942,.F.); +#62194 = PLANE('',#62195); +#62195 = AXIS2_PLACEMENT_3D('',#62196,#62197,#62198); +#62196 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#62197 = DIRECTION('',(0.,0.,1.)); +#62198 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#62199 = ADVANCED_FACE('',(#62200),#62211,.T.); +#62200 = FACE_BOUND('',#62201,.T.); +#62201 = EDGE_LOOP('',(#62202,#62203,#62204,#62205)); +#62202 = ORIENTED_EDGE('',*,*,#60933,.T.); +#62203 = ORIENTED_EDGE('',*,*,#62186,.T.); +#62204 = ORIENTED_EDGE('',*,*,#61035,.F.); +#62205 = ORIENTED_EDGE('',*,*,#62206,.F.); +#62206 = EDGE_CURVE('',#60926,#61028,#62207,.T.); +#62207 = LINE('',#62208,#62209); +#62208 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583)); +#62209 = VECTOR('',#62210,1.); +#62210 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62211 = CYLINDRICAL_SURFACE('',#62212,0.25); +#62212 = AXIS2_PLACEMENT_3D('',#62213,#62214,#62215); +#62213 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#62214 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#62215 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#62216 = ADVANCED_FACE('',(#62217),#62223,.F.); +#62217 = FACE_BOUND('',#62218,.F.); +#62218 = EDGE_LOOP('',(#62219,#62220,#62221,#62222)); +#62219 = ORIENTED_EDGE('',*,*,#61009,.T.); +#62220 = ORIENTED_EDGE('',*,*,#61027,.T.); +#62221 = ORIENTED_EDGE('',*,*,#62206,.F.); +#62222 = ORIENTED_EDGE('',*,*,#60925,.F.); +#62223 = PLANE('',#62224); +#62224 = AXIS2_PLACEMENT_3D('',#62225,#62226,#62227); +#62225 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#62226 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012) + ); +#62227 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#62228 = ADVANCED_FACE('',(#62229),#62240,.T.); +#62229 = FACE_BOUND('',#62230,.T.); +#62230 = EDGE_LOOP('',(#62231,#62232,#62233,#62234)); +#62231 = ORIENTED_EDGE('',*,*,#61187,.T.); +#62232 = ORIENTED_EDGE('',*,*,#61660,.T.); +#62233 = ORIENTED_EDGE('',*,*,#61296,.F.); +#62234 = ORIENTED_EDGE('',*,*,#62235,.F.); +#62235 = EDGE_CURVE('',#61180,#61289,#62236,.T.); +#62236 = LINE('',#62237,#62238); +#62237 = CARTESIAN_POINT('',(1.096201938253,0.25,0.693412044417)); +#62238 = VECTOR('',#62239,1.); +#62239 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62240 = CYLINDRICAL_SURFACE('',#62241,0.25); +#62241 = AXIS2_PLACEMENT_3D('',#62242,#62243,#62244); +#62242 = CARTESIAN_POINT('',(0.85,0.25,0.65)); +#62243 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#62244 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#62245 = ADVANCED_FACE('',(#62246),#62257,.F.); +#62246 = FACE_BOUND('',#62247,.F.); +#62247 = EDGE_LOOP('',(#62248,#62254,#62255,#62256)); +#62248 = ORIENTED_EDGE('',*,*,#62249,.T.); +#62249 = EDGE_CURVE('',#61171,#61280,#62250,.T.); +#62250 = LINE('',#62251,#62252); +#62251 = CARTESIAN_POINT('',(1.172050016982,0.25,0.232635182233)); +#62252 = VECTOR('',#62253,1.); +#62253 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62254 = ORIENTED_EDGE('',*,*,#61288,.T.); +#62255 = ORIENTED_EDGE('',*,*,#62235,.F.); +#62256 = ORIENTED_EDGE('',*,*,#61179,.F.); +#62257 = PLANE('',#62258); +#62258 = AXIS2_PLACEMENT_3D('',#62259,#62260,#62261); +#62259 = CARTESIAN_POINT('',(1.172050016982,0.25,0.232635182233)); +#62260 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#62261 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#62262 = ADVANCED_FACE('',(#62263),#62274,.F.); +#62263 = FACE_BOUND('',#62264,.F.); +#62264 = EDGE_LOOP('',(#62265,#62271,#62272,#62273)); +#62265 = ORIENTED_EDGE('',*,*,#62266,.T.); +#62266 = EDGE_CURVE('',#61163,#61272,#62267,.T.); +#62267 = LINE('',#62268,#62269); +#62268 = CARTESIAN_POINT('',(1.270530792283,0.25,0.15)); +#62269 = VECTOR('',#62270,1.); +#62270 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62271 = ORIENTED_EDGE('',*,*,#61279,.T.); +#62272 = ORIENTED_EDGE('',*,*,#62249,.F.); +#62273 = ORIENTED_EDGE('',*,*,#61170,.F.); +#62274 = CYLINDRICAL_SURFACE('',#62275,0.1); +#62275 = AXIS2_PLACEMENT_3D('',#62276,#62277,#62278); +#62276 = CARTESIAN_POINT('',(1.270530792283,0.25,0.25)); +#62277 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#62278 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#62279 = ADVANCED_FACE('',(#62280),#62291,.F.); +#62280 = FACE_BOUND('',#62281,.F.); +#62281 = EDGE_LOOP('',(#62282,#62288,#62289,#62290)); +#62282 = ORIENTED_EDGE('',*,*,#62283,.T.); +#62283 = EDGE_CURVE('',#61155,#61264,#62284,.T.); +#62284 = LINE('',#62285,#62286); +#62285 = CARTESIAN_POINT('',(1.4,0.25,0.15)); +#62286 = VECTOR('',#62287,1.); +#62287 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62288 = ORIENTED_EDGE('',*,*,#61271,.T.); +#62289 = ORIENTED_EDGE('',*,*,#62266,.F.); +#62290 = ORIENTED_EDGE('',*,*,#61162,.F.); +#62291 = PLANE('',#62292); +#62292 = AXIS2_PLACEMENT_3D('',#62293,#62294,#62295); +#62293 = CARTESIAN_POINT('',(1.4,0.25,0.15)); +#62294 = DIRECTION('',(0.,0.,-1.)); +#62295 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#62296 = ADVANCED_FACE('',(#62297),#62308,.F.); +#62297 = FACE_BOUND('',#62298,.F.); +#62298 = EDGE_LOOP('',(#62299,#62305,#62306,#62307)); +#62299 = ORIENTED_EDGE('',*,*,#62300,.T.); +#62300 = EDGE_CURVE('',#61147,#61256,#62301,.T.); +#62301 = LINE('',#62302,#62303); +#62302 = CARTESIAN_POINT('',(1.4,0.25,0.)); +#62303 = VECTOR('',#62304,1.); +#62304 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62305 = ORIENTED_EDGE('',*,*,#61263,.T.); +#62306 = ORIENTED_EDGE('',*,*,#62283,.F.); +#62307 = ORIENTED_EDGE('',*,*,#61154,.F.); +#62308 = PLANE('',#62309); +#62309 = AXIS2_PLACEMENT_3D('',#62310,#62311,#62312); +#62310 = CARTESIAN_POINT('',(1.4,0.25,0.)); +#62311 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#62312 = DIRECTION('',(0.,0.,1.)); +#62313 = ADVANCED_FACE('',(#62314),#62325,.F.); +#62314 = FACE_BOUND('',#62315,.F.); +#62315 = EDGE_LOOP('',(#62316,#62322,#62323,#62324)); +#62316 = ORIENTED_EDGE('',*,*,#62317,.T.); +#62317 = EDGE_CURVE('',#61138,#61247,#62318,.T.); +#62318 = LINE('',#62319,#62320); +#62319 = CARTESIAN_POINT('',(1.270530792283,0.25,0.)); +#62320 = VECTOR('',#62321,1.); +#62321 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62322 = ORIENTED_EDGE('',*,*,#61255,.T.); +#62323 = ORIENTED_EDGE('',*,*,#62300,.F.); +#62324 = ORIENTED_EDGE('',*,*,#61146,.F.); +#62325 = PLANE('',#62326); +#62326 = AXIS2_PLACEMENT_3D('',#62327,#62328,#62329); +#62327 = CARTESIAN_POINT('',(1.270530792283,0.25,0.)); +#62328 = DIRECTION('',(0.,0.,1.)); +#62329 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#62330 = ADVANCED_FACE('',(#62331),#62342,.T.); +#62331 = FACE_BOUND('',#62332,.T.); +#62332 = EDGE_LOOP('',(#62333,#62334,#62335,#62336)); +#62333 = ORIENTED_EDGE('',*,*,#61137,.T.); +#62334 = ORIENTED_EDGE('',*,*,#62317,.T.); +#62335 = ORIENTED_EDGE('',*,*,#61246,.F.); +#62336 = ORIENTED_EDGE('',*,*,#62337,.F.); +#62337 = EDGE_CURVE('',#61130,#61239,#62338,.T.); +#62338 = LINE('',#62339,#62340); +#62339 = CARTESIAN_POINT('',(1.02432885403,0.25,0.206587955583)); +#62340 = VECTOR('',#62341,1.); +#62341 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62342 = CYLINDRICAL_SURFACE('',#62343,0.25); +#62343 = AXIS2_PLACEMENT_3D('',#62344,#62345,#62346); +#62344 = CARTESIAN_POINT('',(1.270530792283,0.25,0.25)); +#62345 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#62346 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#62347 = ADVANCED_FACE('',(#62348),#62354,.F.); +#62348 = FACE_BOUND('',#62349,.F.); +#62349 = EDGE_LOOP('',(#62350,#62351,#62352,#62353)); +#62350 = ORIENTED_EDGE('',*,*,#61220,.T.); +#62351 = ORIENTED_EDGE('',*,*,#61238,.T.); +#62352 = ORIENTED_EDGE('',*,*,#62337,.F.); +#62353 = ORIENTED_EDGE('',*,*,#61129,.F.); +#62354 = PLANE('',#62355); +#62355 = AXIS2_PLACEMENT_3D('',#62356,#62357,#62358); +#62356 = CARTESIAN_POINT('',(0.948480775301,0.25,0.667364817767)); +#62357 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012) + ); +#62358 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#62359 = ADVANCED_FACE('',(#62360),#62371,.T.); +#62360 = FACE_BOUND('',#62361,.T.); +#62361 = EDGE_LOOP('',(#62362,#62363,#62364,#62365)); +#62362 = ORIENTED_EDGE('',*,*,#61410,.T.); +#62363 = ORIENTED_EDGE('',*,*,#61679,.T.); +#62364 = ORIENTED_EDGE('',*,*,#61519,.F.); +#62365 = ORIENTED_EDGE('',*,*,#62366,.F.); +#62366 = EDGE_CURVE('',#61403,#61512,#62367,.T.); +#62367 = LINE('',#62368,#62369); +#62368 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417)); +#62369 = VECTOR('',#62370,1.); +#62370 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62371 = CYLINDRICAL_SURFACE('',#62372,0.25); +#62372 = AXIS2_PLACEMENT_3D('',#62373,#62374,#62375); +#62373 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#62374 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#62375 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667) + ); +#62376 = ADVANCED_FACE('',(#62377),#62388,.F.); +#62377 = FACE_BOUND('',#62378,.F.); +#62378 = EDGE_LOOP('',(#62379,#62385,#62386,#62387)); +#62379 = ORIENTED_EDGE('',*,*,#62380,.T.); +#62380 = EDGE_CURVE('',#61394,#61503,#62381,.T.); +#62381 = LINE('',#62382,#62383); +#62382 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#62383 = VECTOR('',#62384,1.); +#62384 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62385 = ORIENTED_EDGE('',*,*,#61511,.T.); +#62386 = ORIENTED_EDGE('',*,*,#62366,.F.); +#62387 = ORIENTED_EDGE('',*,*,#61402,.F.); +#62388 = PLANE('',#62389); +#62389 = AXIS2_PLACEMENT_3D('',#62390,#62391,#62392); +#62390 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#62391 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#62392 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#62393 = ADVANCED_FACE('',(#62394),#62405,.F.); +#62394 = FACE_BOUND('',#62395,.F.); +#62395 = EDGE_LOOP('',(#62396,#62402,#62403,#62404)); +#62396 = ORIENTED_EDGE('',*,*,#62397,.T.); +#62397 = EDGE_CURVE('',#61386,#61495,#62398,.T.); +#62398 = LINE('',#62399,#62400); +#62399 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15)); +#62400 = VECTOR('',#62401,1.); +#62401 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62402 = ORIENTED_EDGE('',*,*,#61502,.T.); +#62403 = ORIENTED_EDGE('',*,*,#62380,.F.); +#62404 = ORIENTED_EDGE('',*,*,#61393,.F.); +#62405 = CYLINDRICAL_SURFACE('',#62406,0.1); +#62406 = AXIS2_PLACEMENT_3D('',#62407,#62408,#62409); +#62407 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#62408 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#62409 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#62410 = ADVANCED_FACE('',(#62411),#62422,.F.); +#62411 = FACE_BOUND('',#62412,.F.); +#62412 = EDGE_LOOP('',(#62413,#62419,#62420,#62421)); +#62413 = ORIENTED_EDGE('',*,*,#62414,.T.); +#62414 = EDGE_CURVE('',#61378,#61487,#62415,.T.); +#62415 = LINE('',#62416,#62417); +#62416 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#62417 = VECTOR('',#62418,1.); +#62418 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62419 = ORIENTED_EDGE('',*,*,#61494,.T.); +#62420 = ORIENTED_EDGE('',*,*,#62397,.F.); +#62421 = ORIENTED_EDGE('',*,*,#61385,.F.); +#62422 = PLANE('',#62423); +#62423 = AXIS2_PLACEMENT_3D('',#62424,#62425,#62426); +#62424 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#62425 = DIRECTION('',(0.,0.,-1.)); +#62426 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#62427 = ADVANCED_FACE('',(#62428),#62439,.F.); +#62428 = FACE_BOUND('',#62429,.F.); +#62429 = EDGE_LOOP('',(#62430,#62436,#62437,#62438)); +#62430 = ORIENTED_EDGE('',*,*,#62431,.T.); +#62431 = EDGE_CURVE('',#61370,#61479,#62432,.T.); +#62432 = LINE('',#62433,#62434); +#62433 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#62434 = VECTOR('',#62435,1.); +#62435 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62436 = ORIENTED_EDGE('',*,*,#61486,.T.); +#62437 = ORIENTED_EDGE('',*,*,#62414,.F.); +#62438 = ORIENTED_EDGE('',*,*,#61377,.F.); +#62439 = PLANE('',#62440); +#62440 = AXIS2_PLACEMENT_3D('',#62441,#62442,#62443); +#62441 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#62442 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#62443 = DIRECTION('',(0.,0.,1.)); +#62444 = ADVANCED_FACE('',(#62445),#62456,.F.); +#62445 = FACE_BOUND('',#62446,.F.); +#62446 = EDGE_LOOP('',(#62447,#62453,#62454,#62455)); +#62447 = ORIENTED_EDGE('',*,*,#62448,.T.); +#62448 = EDGE_CURVE('',#61361,#61470,#62449,.T.); +#62449 = LINE('',#62450,#62451); +#62450 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#62451 = VECTOR('',#62452,1.); +#62452 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62453 = ORIENTED_EDGE('',*,*,#61478,.T.); +#62454 = ORIENTED_EDGE('',*,*,#62431,.F.); +#62455 = ORIENTED_EDGE('',*,*,#61369,.F.); +#62456 = PLANE('',#62457); +#62457 = AXIS2_PLACEMENT_3D('',#62458,#62459,#62460); +#62458 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#62459 = DIRECTION('',(0.,0.,1.)); +#62460 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#62461 = ADVANCED_FACE('',(#62462),#62473,.T.); +#62462 = FACE_BOUND('',#62463,.T.); +#62463 = EDGE_LOOP('',(#62464,#62465,#62466,#62467)); +#62464 = ORIENTED_EDGE('',*,*,#61360,.T.); +#62465 = ORIENTED_EDGE('',*,*,#62448,.T.); +#62466 = ORIENTED_EDGE('',*,*,#61469,.F.); +#62467 = ORIENTED_EDGE('',*,*,#62468,.F.); +#62468 = EDGE_CURVE('',#61353,#61462,#62469,.T.); +#62469 = LINE('',#62470,#62471); +#62470 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583)); +#62471 = VECTOR('',#62472,1.); +#62472 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62473 = CYLINDRICAL_SURFACE('',#62474,0.25); +#62474 = AXIS2_PLACEMENT_3D('',#62475,#62476,#62477); +#62475 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#62476 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#62477 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#62478 = ADVANCED_FACE('',(#62479),#62485,.F.); +#62479 = FACE_BOUND('',#62480,.F.); +#62480 = EDGE_LOOP('',(#62481,#62482,#62483,#62484)); +#62481 = ORIENTED_EDGE('',*,*,#61443,.T.); +#62482 = ORIENTED_EDGE('',*,*,#61461,.T.); +#62483 = ORIENTED_EDGE('',*,*,#62468,.F.); +#62484 = ORIENTED_EDGE('',*,*,#61352,.F.); +#62485 = PLANE('',#62486); +#62486 = AXIS2_PLACEMENT_3D('',#62487,#62488,#62489); +#62487 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#62488 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012) + ); +#62489 = DIRECTION('',(0.162423314012,1.803261029519E-17,-0.986721169868 + )); +#62490 = ADVANCED_FACE('',(#62491),#62494,.F.); +#62491 = FACE_BOUND('',#62492,.T.); +#62492 = EDGE_LOOP('',(#62493)); +#62493 = ORIENTED_EDGE('',*,*,#61626,.F.); +#62494 = PLANE('',#62495); +#62495 = AXIS2_PLACEMENT_3D('',#62496,#62497,#62498); +#62496 = CARTESIAN_POINT('',(-0.333648457443,0.983648457443,1.55)); +#62497 = DIRECTION('',(0.,0.,-1.)); +#62498 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#62499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#62503)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#62500,#62501,#62502)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#62500 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#62501 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#62502 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#62503 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#62500, + 'distance_accuracy_value','confusion accuracy'); +#62504 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#62505,#62507); +#62505 = ( REPRESENTATION_RELATIONSHIP('','',#58962,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#62506) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#62506 = ITEM_DEFINED_TRANSFORMATION('','',#11,#223); +#62507 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #62508); +#62508 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('53','U5','',#5,#58957,$); +#62509 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#58959)); +#62510 = SHAPE_DEFINITION_REPRESENTATION(#62511,#62517); +#62511 = PRODUCT_DEFINITION_SHAPE('','',#62512); +#62512 = PRODUCT_DEFINITION('design','',#62513,#62516); +#62513 = PRODUCT_DEFINITION_FORMATION('','',#62514); +#62514 = PRODUCT('sandtable-controller_PCB','sandtable-controller_PCB', + '',(#62515)); +#62515 = PRODUCT_CONTEXT('',#2,'mechanical'); +#62516 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#62517 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#62518),#66245); +#62518 = MANIFOLD_SOLID_BREP('',#62519); +#62519 = CLOSED_SHELL('',(#62520,#62560,#62591,#62622,#63620,#64618, + #64630,#64647,#64669,#64686,#64703,#64715,#64732,#64754,#64771, + #64788,#64800,#64817,#64839,#64856,#64873,#64885,#64907,#64924, + #64941,#64953,#64970,#64987,#65004,#65021,#65038,#65055,#65072, + #65089,#65106,#65123,#65140,#65157,#65174,#65196,#65213,#65230, + #65242,#65259,#65281,#65298,#65315,#65327,#65349,#65366,#65383, + #65395,#65417,#65434,#65451,#65463,#65480,#65497,#65514,#65531, + #65548,#65565,#65582,#65599,#65616,#65633,#65650,#65667,#65684, + #65701,#65718,#65735,#65752,#65769,#65786,#65803,#65820,#65837, + #65854,#65871,#65888,#65905,#65922,#65939,#65956,#65973,#65990, + #66007,#66024,#66041,#66058,#66075,#66092,#66109,#66126,#66143, + #66160,#66177,#66194,#66211,#66228)); +#62520 = ADVANCED_FACE('',(#62521),#62555,.T.); +#62521 = FACE_BOUND('',#62522,.T.); +#62522 = EDGE_LOOP('',(#62523,#62533,#62541,#62549)); +#62523 = ORIENTED_EDGE('',*,*,#62524,.T.); +#62524 = EDGE_CURVE('',#62525,#62527,#62529,.T.); +#62525 = VERTEX_POINT('',#62526); +#62526 = CARTESIAN_POINT('',(180.,-163.34,0.)); +#62527 = VERTEX_POINT('',#62528); +#62528 = CARTESIAN_POINT('',(180.,-163.34,1.51)); +#62529 = LINE('',#62530,#62531); +#62530 = CARTESIAN_POINT('',(180.,-163.34,0.)); +#62531 = VECTOR('',#62532,1.); +#62532 = DIRECTION('',(0.,0.,1.)); +#62533 = ORIENTED_EDGE('',*,*,#62534,.T.); +#62534 = EDGE_CURVE('',#62527,#62535,#62537,.T.); +#62535 = VERTEX_POINT('',#62536); +#62536 = CARTESIAN_POINT('',(100.,-163.34,1.51)); +#62537 = LINE('',#62538,#62539); +#62538 = CARTESIAN_POINT('',(180.,-163.34,1.51)); +#62539 = VECTOR('',#62540,1.); +#62540 = DIRECTION('',(-1.,0.,0.)); +#62541 = ORIENTED_EDGE('',*,*,#62542,.F.); +#62542 = EDGE_CURVE('',#62543,#62535,#62545,.T.); +#62543 = VERTEX_POINT('',#62544); +#62544 = CARTESIAN_POINT('',(100.,-163.34,0.)); +#62545 = LINE('',#62546,#62547); +#62546 = CARTESIAN_POINT('',(100.,-163.34,0.)); +#62547 = VECTOR('',#62548,1.); +#62548 = DIRECTION('',(0.,0.,1.)); +#62549 = ORIENTED_EDGE('',*,*,#62550,.F.); +#62550 = EDGE_CURVE('',#62525,#62543,#62551,.T.); +#62551 = LINE('',#62552,#62553); +#62552 = CARTESIAN_POINT('',(180.,-163.34,0.)); +#62553 = VECTOR('',#62554,1.); +#62554 = DIRECTION('',(-1.,0.,0.)); +#62555 = PLANE('',#62556); +#62556 = AXIS2_PLACEMENT_3D('',#62557,#62558,#62559); +#62557 = CARTESIAN_POINT('',(180.,-163.34,0.)); +#62558 = DIRECTION('',(0.,-1.,0.)); +#62559 = DIRECTION('',(-1.,0.,0.)); +#62560 = ADVANCED_FACE('',(#62561),#62586,.T.); +#62561 = FACE_BOUND('',#62562,.T.); +#62562 = EDGE_LOOP('',(#62563,#62573,#62579,#62580)); +#62563 = ORIENTED_EDGE('',*,*,#62564,.T.); +#62564 = EDGE_CURVE('',#62565,#62567,#62569,.T.); +#62565 = VERTEX_POINT('',#62566); +#62566 = CARTESIAN_POINT('',(180.,-100.,0.)); +#62567 = VERTEX_POINT('',#62568); +#62568 = CARTESIAN_POINT('',(180.,-100.,1.51)); +#62569 = LINE('',#62570,#62571); +#62570 = CARTESIAN_POINT('',(180.,-100.,0.)); +#62571 = VECTOR('',#62572,1.); +#62572 = DIRECTION('',(0.,0.,1.)); +#62573 = ORIENTED_EDGE('',*,*,#62574,.T.); +#62574 = EDGE_CURVE('',#62567,#62527,#62575,.T.); +#62575 = LINE('',#62576,#62577); +#62576 = CARTESIAN_POINT('',(180.,-100.,1.51)); +#62577 = VECTOR('',#62578,1.); +#62578 = DIRECTION('',(0.,-1.,0.)); +#62579 = ORIENTED_EDGE('',*,*,#62524,.F.); +#62580 = ORIENTED_EDGE('',*,*,#62581,.F.); +#62581 = EDGE_CURVE('',#62565,#62525,#62582,.T.); +#62582 = LINE('',#62583,#62584); +#62583 = CARTESIAN_POINT('',(180.,-100.,0.)); +#62584 = VECTOR('',#62585,1.); +#62585 = DIRECTION('',(0.,-1.,0.)); +#62586 = PLANE('',#62587); +#62587 = AXIS2_PLACEMENT_3D('',#62588,#62589,#62590); +#62588 = CARTESIAN_POINT('',(180.,-100.,0.)); +#62589 = DIRECTION('',(1.,0.,-0.)); +#62590 = DIRECTION('',(0.,-1.,0.)); +#62591 = ADVANCED_FACE('',(#62592),#62617,.T.); +#62592 = FACE_BOUND('',#62593,.T.); +#62593 = EDGE_LOOP('',(#62594,#62595,#62603,#62611)); +#62594 = ORIENTED_EDGE('',*,*,#62542,.T.); +#62595 = ORIENTED_EDGE('',*,*,#62596,.T.); +#62596 = EDGE_CURVE('',#62535,#62597,#62599,.T.); +#62597 = VERTEX_POINT('',#62598); +#62598 = CARTESIAN_POINT('',(100.,-100.,1.51)); +#62599 = LINE('',#62600,#62601); +#62600 = CARTESIAN_POINT('',(100.,-163.34,1.51)); +#62601 = VECTOR('',#62602,1.); +#62602 = DIRECTION('',(0.,1.,0.)); +#62603 = ORIENTED_EDGE('',*,*,#62604,.F.); +#62604 = EDGE_CURVE('',#62605,#62597,#62607,.T.); +#62605 = VERTEX_POINT('',#62606); +#62606 = CARTESIAN_POINT('',(100.,-100.,0.)); +#62607 = LINE('',#62608,#62609); +#62608 = CARTESIAN_POINT('',(100.,-100.,0.)); +#62609 = VECTOR('',#62610,1.); +#62610 = DIRECTION('',(0.,0.,1.)); +#62611 = ORIENTED_EDGE('',*,*,#62612,.F.); +#62612 = EDGE_CURVE('',#62543,#62605,#62613,.T.); +#62613 = LINE('',#62614,#62615); +#62614 = CARTESIAN_POINT('',(100.,-163.34,0.)); +#62615 = VECTOR('',#62616,1.); +#62616 = DIRECTION('',(0.,1.,0.)); +#62617 = PLANE('',#62618); +#62618 = AXIS2_PLACEMENT_3D('',#62619,#62620,#62621); +#62619 = CARTESIAN_POINT('',(100.,-163.34,0.)); +#62620 = DIRECTION('',(-1.,0.,0.)); +#62621 = DIRECTION('',(0.,1.,0.)); +#62622 = ADVANCED_FACE('',(#62623,#62634,#62645,#62681,#62692,#62728, + #62739,#62775,#62811,#62822,#62833,#62844,#62855,#62866,#62877, + #62888,#62899,#62910,#62921,#62932,#62943,#62954,#62990,#63001, + #63037,#63073,#63109,#63120,#63131,#63142,#63153,#63164,#63175, + #63186,#63197,#63208,#63219,#63230,#63241,#63252,#63263,#63274, + #63285,#63296,#63307,#63318,#63329,#63340,#63351,#63362,#63373, + #63384,#63395,#63406,#63417,#63428,#63439,#63450,#63461,#63472, + #63483,#63494,#63505,#63516,#63527,#63538,#63549,#63560,#63571, + #63582,#63593,#63604),#63615,.F.); +#62623 = FACE_BOUND('',#62624,.F.); +#62624 = EDGE_LOOP('',(#62625,#62626,#62627,#62633)); +#62625 = ORIENTED_EDGE('',*,*,#62550,.F.); +#62626 = ORIENTED_EDGE('',*,*,#62581,.F.); +#62627 = ORIENTED_EDGE('',*,*,#62628,.F.); +#62628 = EDGE_CURVE('',#62605,#62565,#62629,.T.); +#62629 = LINE('',#62630,#62631); +#62630 = CARTESIAN_POINT('',(100.,-100.,0.)); +#62631 = VECTOR('',#62632,1.); +#62632 = DIRECTION('',(1.,0.,0.)); +#62633 = ORIENTED_EDGE('',*,*,#62612,.F.); +#62634 = FACE_BOUND('',#62635,.F.); +#62635 = EDGE_LOOP('',(#62636)); +#62636 = ORIENTED_EDGE('',*,*,#62637,.T.); +#62637 = EDGE_CURVE('',#62638,#62638,#62640,.T.); +#62638 = VERTEX_POINT('',#62639); +#62639 = CARTESIAN_POINT('',(113.97,-157.4,0.)); +#62640 = CIRCLE('',#62641,1.6); +#62641 = AXIS2_PLACEMENT_3D('',#62642,#62643,#62644); +#62642 = CARTESIAN_POINT('',(113.97,-155.8,0.)); +#62643 = DIRECTION('',(-0.,0.,-1.)); +#62644 = DIRECTION('',(-0.,-1.,0.)); +#62645 = FACE_BOUND('',#62646,.F.); +#62646 = EDGE_LOOP('',(#62647,#62658,#62666,#62675)); +#62647 = ORIENTED_EDGE('',*,*,#62648,.T.); +#62648 = EDGE_CURVE('',#62649,#62651,#62653,.T.); +#62649 = VERTEX_POINT('',#62650); +#62650 = CARTESIAN_POINT('',(102.05,-148.62,0.)); +#62651 = VERTEX_POINT('',#62652); +#62652 = CARTESIAN_POINT('',(102.05,-148.02,0.)); +#62653 = CIRCLE('',#62654,0.3); +#62654 = AXIS2_PLACEMENT_3D('',#62655,#62656,#62657); +#62655 = CARTESIAN_POINT('',(102.05,-148.32,0.)); +#62656 = DIRECTION('',(-0.,0.,-1.)); +#62657 = DIRECTION('',(0.,1.,0.)); +#62658 = ORIENTED_EDGE('',*,*,#62659,.T.); +#62659 = EDGE_CURVE('',#62651,#62660,#62662,.T.); +#62660 = VERTEX_POINT('',#62661); +#62661 = CARTESIAN_POINT('',(102.65,-148.02,0.)); +#62662 = LINE('',#62663,#62664); +#62663 = CARTESIAN_POINT('',(51.325,-148.02,0.)); +#62664 = VECTOR('',#62665,1.); +#62665 = DIRECTION('',(1.,0.,-0.)); +#62666 = ORIENTED_EDGE('',*,*,#62667,.T.); +#62667 = EDGE_CURVE('',#62660,#62668,#62670,.T.); +#62668 = VERTEX_POINT('',#62669); +#62669 = CARTESIAN_POINT('',(102.65,-148.62,0.)); +#62670 = CIRCLE('',#62671,0.3); +#62671 = AXIS2_PLACEMENT_3D('',#62672,#62673,#62674); +#62672 = CARTESIAN_POINT('',(102.65,-148.32,0.)); +#62673 = DIRECTION('',(-0.,0.,-1.)); +#62674 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#62675 = ORIENTED_EDGE('',*,*,#62676,.T.); +#62676 = EDGE_CURVE('',#62668,#62649,#62677,.T.); +#62677 = LINE('',#62678,#62679); +#62678 = CARTESIAN_POINT('',(51.025,-148.62,0.)); +#62679 = VECTOR('',#62680,1.); +#62680 = DIRECTION('',(-1.,0.,0.)); +#62681 = FACE_BOUND('',#62682,.F.); +#62682 = EDGE_LOOP('',(#62683)); +#62683 = ORIENTED_EDGE('',*,*,#62684,.T.); +#62684 = EDGE_CURVE('',#62685,#62685,#62687,.T.); +#62685 = VERTEX_POINT('',#62686); +#62686 = CARTESIAN_POINT('',(106.,-147.215,0.)); +#62687 = CIRCLE('',#62688,0.325); +#62688 = AXIS2_PLACEMENT_3D('',#62689,#62690,#62691); +#62689 = CARTESIAN_POINT('',(106.,-146.89,0.)); +#62690 = DIRECTION('',(-0.,0.,-1.)); +#62691 = DIRECTION('',(-0.,-1.,0.)); +#62692 = FACE_BOUND('',#62693,.F.); +#62693 = EDGE_LOOP('',(#62694,#62705,#62713,#62722)); +#62694 = ORIENTED_EDGE('',*,*,#62695,.T.); +#62695 = EDGE_CURVE('',#62696,#62698,#62700,.T.); +#62696 = VERTEX_POINT('',#62697); +#62697 = CARTESIAN_POINT('',(105.98,-148.62,0.)); +#62698 = VERTEX_POINT('',#62699); +#62699 = CARTESIAN_POINT('',(105.98,-148.02,0.)); +#62700 = CIRCLE('',#62701,0.3); +#62701 = AXIS2_PLACEMENT_3D('',#62702,#62703,#62704); +#62702 = CARTESIAN_POINT('',(105.98,-148.32,0.)); +#62703 = DIRECTION('',(-0.,0.,-1.)); +#62704 = DIRECTION('',(0.,1.,0.)); +#62705 = ORIENTED_EDGE('',*,*,#62706,.T.); +#62706 = EDGE_CURVE('',#62698,#62707,#62709,.T.); +#62707 = VERTEX_POINT('',#62708); +#62708 = CARTESIAN_POINT('',(107.08,-148.02,0.)); +#62709 = LINE('',#62710,#62711); +#62710 = CARTESIAN_POINT('',(53.54,-148.02,0.)); +#62711 = VECTOR('',#62712,1.); +#62712 = DIRECTION('',(1.,0.,-0.)); +#62713 = ORIENTED_EDGE('',*,*,#62714,.T.); +#62714 = EDGE_CURVE('',#62707,#62715,#62717,.T.); +#62715 = VERTEX_POINT('',#62716); +#62716 = CARTESIAN_POINT('',(107.08,-148.62,0.)); +#62717 = CIRCLE('',#62718,0.3); +#62718 = AXIS2_PLACEMENT_3D('',#62719,#62720,#62721); +#62719 = CARTESIAN_POINT('',(107.08,-148.32,0.)); +#62720 = DIRECTION('',(-0.,0.,-1.)); +#62721 = DIRECTION('',(-0.,-1.,0.)); +#62722 = ORIENTED_EDGE('',*,*,#62723,.T.); +#62723 = EDGE_CURVE('',#62715,#62696,#62724,.T.); +#62724 = LINE('',#62725,#62726); +#62725 = CARTESIAN_POINT('',(52.99,-148.62,0.)); +#62726 = VECTOR('',#62727,1.); +#62727 = DIRECTION('',(-1.,0.,0.)); +#62728 = FACE_BOUND('',#62729,.F.); +#62729 = EDGE_LOOP('',(#62730)); +#62730 = ORIENTED_EDGE('',*,*,#62731,.T.); +#62731 = EDGE_CURVE('',#62732,#62732,#62734,.T.); +#62732 = VERTEX_POINT('',#62733); +#62733 = CARTESIAN_POINT('',(106.,-141.435,0.)); +#62734 = CIRCLE('',#62735,0.325); +#62735 = AXIS2_PLACEMENT_3D('',#62736,#62737,#62738); +#62736 = CARTESIAN_POINT('',(106.,-141.11,0.)); +#62737 = DIRECTION('',(-0.,0.,-1.)); +#62738 = DIRECTION('',(-0.,-1.,0.)); +#62739 = FACE_BOUND('',#62740,.F.); +#62740 = EDGE_LOOP('',(#62741,#62752,#62760,#62769)); +#62741 = ORIENTED_EDGE('',*,*,#62742,.T.); +#62742 = EDGE_CURVE('',#62743,#62745,#62747,.T.); +#62743 = VERTEX_POINT('',#62744); +#62744 = CARTESIAN_POINT('',(102.05,-139.98,0.)); +#62745 = VERTEX_POINT('',#62746); +#62746 = CARTESIAN_POINT('',(102.05,-139.38,0.)); +#62747 = CIRCLE('',#62748,0.3); +#62748 = AXIS2_PLACEMENT_3D('',#62749,#62750,#62751); +#62749 = CARTESIAN_POINT('',(102.05,-139.68,0.)); +#62750 = DIRECTION('',(-0.,0.,-1.)); +#62751 = DIRECTION('',(0.,1.,0.)); +#62752 = ORIENTED_EDGE('',*,*,#62753,.T.); +#62753 = EDGE_CURVE('',#62745,#62754,#62756,.T.); +#62754 = VERTEX_POINT('',#62755); +#62755 = CARTESIAN_POINT('',(102.65,-139.38,0.)); +#62756 = LINE('',#62757,#62758); +#62757 = CARTESIAN_POINT('',(51.325,-139.38,0.)); +#62758 = VECTOR('',#62759,1.); +#62759 = DIRECTION('',(1.,0.,-0.)); +#62760 = ORIENTED_EDGE('',*,*,#62761,.T.); +#62761 = EDGE_CURVE('',#62754,#62762,#62764,.T.); +#62762 = VERTEX_POINT('',#62763); +#62763 = CARTESIAN_POINT('',(102.65,-139.98,0.)); +#62764 = CIRCLE('',#62765,0.3); +#62765 = AXIS2_PLACEMENT_3D('',#62766,#62767,#62768); +#62766 = CARTESIAN_POINT('',(102.65,-139.68,0.)); +#62767 = DIRECTION('',(-0.,0.,-1.)); +#62768 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#62769 = ORIENTED_EDGE('',*,*,#62770,.T.); +#62770 = EDGE_CURVE('',#62762,#62743,#62771,.T.); +#62771 = LINE('',#62772,#62773); +#62772 = CARTESIAN_POINT('',(51.025,-139.98,0.)); +#62773 = VECTOR('',#62774,1.); +#62774 = DIRECTION('',(-1.,0.,0.)); +#62775 = FACE_BOUND('',#62776,.F.); +#62776 = EDGE_LOOP('',(#62777,#62788,#62796,#62805)); +#62777 = ORIENTED_EDGE('',*,*,#62778,.T.); +#62778 = EDGE_CURVE('',#62779,#62781,#62783,.T.); +#62779 = VERTEX_POINT('',#62780); +#62780 = CARTESIAN_POINT('',(105.98,-139.98,0.)); +#62781 = VERTEX_POINT('',#62782); +#62782 = CARTESIAN_POINT('',(105.98,-139.38,0.)); +#62783 = CIRCLE('',#62784,0.3); +#62784 = AXIS2_PLACEMENT_3D('',#62785,#62786,#62787); +#62785 = CARTESIAN_POINT('',(105.98,-139.68,0.)); +#62786 = DIRECTION('',(-0.,0.,-1.)); +#62787 = DIRECTION('',(0.,1.,0.)); +#62788 = ORIENTED_EDGE('',*,*,#62789,.T.); +#62789 = EDGE_CURVE('',#62781,#62790,#62792,.T.); +#62790 = VERTEX_POINT('',#62791); +#62791 = CARTESIAN_POINT('',(107.08,-139.38,0.)); +#62792 = LINE('',#62793,#62794); +#62793 = CARTESIAN_POINT('',(53.54,-139.38,0.)); +#62794 = VECTOR('',#62795,1.); +#62795 = DIRECTION('',(1.,0.,-0.)); +#62796 = ORIENTED_EDGE('',*,*,#62797,.T.); +#62797 = EDGE_CURVE('',#62790,#62798,#62800,.T.); +#62798 = VERTEX_POINT('',#62799); +#62799 = CARTESIAN_POINT('',(107.08,-139.98,0.)); +#62800 = CIRCLE('',#62801,0.3); +#62801 = AXIS2_PLACEMENT_3D('',#62802,#62803,#62804); +#62802 = CARTESIAN_POINT('',(107.08,-139.68,0.)); +#62803 = DIRECTION('',(-0.,0.,-1.)); +#62804 = DIRECTION('',(-0.,-1.,0.)); +#62805 = ORIENTED_EDGE('',*,*,#62806,.T.); +#62806 = EDGE_CURVE('',#62798,#62779,#62807,.T.); +#62807 = LINE('',#62808,#62809); +#62808 = CARTESIAN_POINT('',(52.99,-139.98,0.)); +#62809 = VECTOR('',#62810,1.); +#62810 = DIRECTION('',(-1.,0.,0.)); +#62811 = FACE_BOUND('',#62812,.F.); +#62812 = EDGE_LOOP('',(#62813)); +#62813 = ORIENTED_EDGE('',*,*,#62814,.T.); +#62814 = EDGE_CURVE('',#62815,#62815,#62817,.T.); +#62815 = VERTEX_POINT('',#62816); +#62816 = CARTESIAN_POINT('',(118.,-135.5,0.)); +#62817 = CIRCLE('',#62818,0.5); +#62818 = AXIS2_PLACEMENT_3D('',#62819,#62820,#62821); +#62819 = CARTESIAN_POINT('',(118.,-135.,0.)); +#62820 = DIRECTION('',(-0.,0.,-1.)); +#62821 = DIRECTION('',(-0.,-1.,0.)); +#62822 = FACE_BOUND('',#62823,.F.); +#62823 = EDGE_LOOP('',(#62824)); +#62824 = ORIENTED_EDGE('',*,*,#62825,.T.); +#62825 = EDGE_CURVE('',#62826,#62826,#62828,.T.); +#62826 = VERTEX_POINT('',#62827); +#62827 = CARTESIAN_POINT('',(120.54,-135.5,0.)); +#62828 = CIRCLE('',#62829,0.5); +#62829 = AXIS2_PLACEMENT_3D('',#62830,#62831,#62832); +#62830 = CARTESIAN_POINT('',(120.54,-135.,0.)); +#62831 = DIRECTION('',(-0.,0.,-1.)); +#62832 = DIRECTION('',(-0.,-1.,0.)); +#62833 = FACE_BOUND('',#62834,.F.); +#62834 = EDGE_LOOP('',(#62835)); +#62835 = ORIENTED_EDGE('',*,*,#62836,.T.); +#62836 = EDGE_CURVE('',#62837,#62837,#62839,.T.); +#62837 = VERTEX_POINT('',#62838); +#62838 = CARTESIAN_POINT('',(123.08,-135.5,0.)); +#62839 = CIRCLE('',#62840,0.5); +#62840 = AXIS2_PLACEMENT_3D('',#62841,#62842,#62843); +#62841 = CARTESIAN_POINT('',(123.08,-135.,0.)); +#62842 = DIRECTION('',(-0.,0.,-1.)); +#62843 = DIRECTION('',(-0.,-1.,0.)); +#62844 = FACE_BOUND('',#62845,.F.); +#62845 = EDGE_LOOP('',(#62846)); +#62846 = ORIENTED_EDGE('',*,*,#62847,.T.); +#62847 = EDGE_CURVE('',#62848,#62848,#62850,.T.); +#62848 = VERTEX_POINT('',#62849); +#62849 = CARTESIAN_POINT('',(177.5,-160.12,0.)); +#62850 = CIRCLE('',#62851,0.5); +#62851 = AXIS2_PLACEMENT_3D('',#62852,#62853,#62854); +#62852 = CARTESIAN_POINT('',(177.5,-159.62,0.)); +#62853 = DIRECTION('',(-0.,0.,-1.)); +#62854 = DIRECTION('',(-0.,-1.,0.)); +#62855 = FACE_BOUND('',#62856,.F.); +#62856 = EDGE_LOOP('',(#62857)); +#62857 = ORIENTED_EDGE('',*,*,#62858,.T.); +#62858 = EDGE_CURVE('',#62859,#62859,#62861,.T.); +#62859 = VERTEX_POINT('',#62860); +#62860 = CARTESIAN_POINT('',(177.5,-157.58,0.)); +#62861 = CIRCLE('',#62862,0.5); +#62862 = AXIS2_PLACEMENT_3D('',#62863,#62864,#62865); +#62863 = CARTESIAN_POINT('',(177.5,-157.08,0.)); +#62864 = DIRECTION('',(-0.,0.,-1.)); +#62865 = DIRECTION('',(-0.,-1.,0.)); +#62866 = FACE_BOUND('',#62867,.F.); +#62867 = EDGE_LOOP('',(#62868)); +#62868 = ORIENTED_EDGE('',*,*,#62869,.T.); +#62869 = EDGE_CURVE('',#62870,#62870,#62872,.T.); +#62870 = VERTEX_POINT('',#62871); +#62871 = CARTESIAN_POINT('',(177.5,-155.04,0.)); +#62872 = CIRCLE('',#62873,0.5); +#62873 = AXIS2_PLACEMENT_3D('',#62874,#62875,#62876); +#62874 = CARTESIAN_POINT('',(177.5,-154.54,0.)); +#62875 = DIRECTION('',(-0.,0.,-1.)); +#62876 = DIRECTION('',(-0.,-1.,0.)); +#62877 = FACE_BOUND('',#62878,.F.); +#62878 = EDGE_LOOP('',(#62879)); +#62879 = ORIENTED_EDGE('',*,*,#62880,.T.); +#62880 = EDGE_CURVE('',#62881,#62881,#62883,.T.); +#62881 = VERTEX_POINT('',#62882); +#62882 = CARTESIAN_POINT('',(166.04,-152.32,0.)); +#62883 = CIRCLE('',#62884,1.6); +#62884 = AXIS2_PLACEMENT_3D('',#62885,#62886,#62887); +#62885 = CARTESIAN_POINT('',(166.04,-150.72,0.)); +#62886 = DIRECTION('',(-0.,0.,-1.)); +#62887 = DIRECTION('',(-0.,-1.,0.)); +#62888 = FACE_BOUND('',#62889,.F.); +#62889 = EDGE_LOOP('',(#62890)); +#62890 = ORIENTED_EDGE('',*,*,#62891,.T.); +#62891 = EDGE_CURVE('',#62892,#62892,#62894,.T.); +#62892 = VERTEX_POINT('',#62893); +#62893 = CARTESIAN_POINT('',(177.5,-152.5,0.)); +#62894 = CIRCLE('',#62895,0.5); +#62895 = AXIS2_PLACEMENT_3D('',#62896,#62897,#62898); +#62896 = CARTESIAN_POINT('',(177.5,-152.,0.)); +#62897 = DIRECTION('',(-0.,0.,-1.)); +#62898 = DIRECTION('',(-0.,-1.,0.)); +#62899 = FACE_BOUND('',#62900,.F.); +#62900 = EDGE_LOOP('',(#62901)); +#62901 = ORIENTED_EDGE('',*,*,#62902,.T.); +#62902 = EDGE_CURVE('',#62903,#62903,#62905,.T.); +#62903 = VERTEX_POINT('',#62904); +#62904 = CARTESIAN_POINT('',(176.5,-146.175,0.)); +#62905 = CIRCLE('',#62906,0.475); +#62906 = AXIS2_PLACEMENT_3D('',#62907,#62908,#62909); +#62907 = CARTESIAN_POINT('',(176.5,-145.7,0.)); +#62908 = DIRECTION('',(-0.,0.,-1.)); +#62909 = DIRECTION('',(-0.,-1.,0.)); +#62910 = FACE_BOUND('',#62911,.F.); +#62911 = EDGE_LOOP('',(#62912)); +#62912 = ORIENTED_EDGE('',*,*,#62913,.T.); +#62913 = EDGE_CURVE('',#62914,#62914,#62916,.T.); +#62914 = VERTEX_POINT('',#62915); +#62915 = CARTESIAN_POINT('',(176.5,-143.675,0.)); +#62916 = CIRCLE('',#62917,0.475); +#62917 = AXIS2_PLACEMENT_3D('',#62918,#62919,#62920); +#62918 = CARTESIAN_POINT('',(176.5,-143.2,0.)); +#62919 = DIRECTION('',(-0.,0.,-1.)); +#62920 = DIRECTION('',(-0.,-1.,0.)); +#62921 = FACE_BOUND('',#62922,.F.); +#62922 = EDGE_LOOP('',(#62923)); +#62923 = ORIENTED_EDGE('',*,*,#62924,.T.); +#62924 = EDGE_CURVE('',#62925,#62925,#62927,.T.); +#62925 = VERTEX_POINT('',#62926); +#62926 = CARTESIAN_POINT('',(176.5,-141.175,0.)); +#62927 = CIRCLE('',#62928,0.475); +#62928 = AXIS2_PLACEMENT_3D('',#62929,#62930,#62931); +#62929 = CARTESIAN_POINT('',(176.5,-140.7,0.)); +#62930 = DIRECTION('',(-0.,0.,-1.)); +#62931 = DIRECTION('',(-0.,-1.,0.)); +#62932 = FACE_BOUND('',#62933,.F.); +#62933 = EDGE_LOOP('',(#62934)); +#62934 = ORIENTED_EDGE('',*,*,#62935,.T.); +#62935 = EDGE_CURVE('',#62936,#62936,#62938,.T.); +#62936 = VERTEX_POINT('',#62937); +#62937 = CARTESIAN_POINT('',(176.5,-135.075,0.)); +#62938 = CIRCLE('',#62939,0.475); +#62939 = AXIS2_PLACEMENT_3D('',#62940,#62941,#62942); +#62940 = CARTESIAN_POINT('',(176.5,-134.6,0.)); +#62941 = DIRECTION('',(-0.,0.,-1.)); +#62942 = DIRECTION('',(-0.,-1.,0.)); +#62943 = FACE_BOUND('',#62944,.F.); +#62944 = EDGE_LOOP('',(#62945)); +#62945 = ORIENTED_EDGE('',*,*,#62946,.T.); +#62946 = EDGE_CURVE('',#62947,#62947,#62949,.T.); +#62947 = VERTEX_POINT('',#62948); +#62948 = CARTESIAN_POINT('',(176.5,-132.575,0.)); +#62949 = CIRCLE('',#62950,0.475); +#62950 = AXIS2_PLACEMENT_3D('',#62951,#62952,#62953); +#62951 = CARTESIAN_POINT('',(176.5,-132.1,0.)); +#62952 = DIRECTION('',(-0.,0.,-1.)); +#62953 = DIRECTION('',(-0.,-1.,0.)); +#62954 = FACE_BOUND('',#62955,.F.); +#62955 = EDGE_LOOP('',(#62956,#62967,#62975,#62984)); +#62956 = ORIENTED_EDGE('',*,*,#62957,.T.); +#62957 = EDGE_CURVE('',#62958,#62960,#62962,.T.); +#62958 = VERTEX_POINT('',#62959); +#62959 = CARTESIAN_POINT('',(104.55,-130.,0.)); +#62960 = VERTEX_POINT('',#62961); +#62961 = CARTESIAN_POINT('',(104.55,-129.,0.)); +#62962 = CIRCLE('',#62963,0.5); +#62963 = AXIS2_PLACEMENT_3D('',#62964,#62965,#62966); +#62964 = CARTESIAN_POINT('',(104.55,-129.5,0.)); +#62965 = DIRECTION('',(-0.,0.,-1.)); +#62966 = DIRECTION('',(0.,1.,0.)); +#62967 = ORIENTED_EDGE('',*,*,#62968,.T.); +#62968 = EDGE_CURVE('',#62960,#62969,#62971,.T.); +#62969 = VERTEX_POINT('',#62970); +#62970 = CARTESIAN_POINT('',(106.05,-129.,0.)); +#62971 = LINE('',#62972,#62973); +#62972 = CARTESIAN_POINT('',(53.025,-129.,0.)); +#62973 = VECTOR('',#62974,1.); +#62974 = DIRECTION('',(1.,0.,-0.)); +#62975 = ORIENTED_EDGE('',*,*,#62976,.T.); +#62976 = EDGE_CURVE('',#62969,#62977,#62979,.T.); +#62977 = VERTEX_POINT('',#62978); +#62978 = CARTESIAN_POINT('',(106.05,-130.,0.)); +#62979 = CIRCLE('',#62980,0.5); +#62980 = AXIS2_PLACEMENT_3D('',#62981,#62982,#62983); +#62981 = CARTESIAN_POINT('',(106.05,-129.5,0.)); +#62982 = DIRECTION('',(-0.,0.,-1.)); +#62983 = DIRECTION('',(-0.,-1.,0.)); +#62984 = ORIENTED_EDGE('',*,*,#62985,.T.); +#62985 = EDGE_CURVE('',#62977,#62958,#62986,.T.); +#62986 = LINE('',#62987,#62988); +#62987 = CARTESIAN_POINT('',(52.275,-130.,0.)); +#62988 = VECTOR('',#62989,1.); +#62989 = DIRECTION('',(-1.,0.,0.)); +#62990 = FACE_BOUND('',#62991,.F.); +#62991 = EDGE_LOOP('',(#62992)); +#62992 = ORIENTED_EDGE('',*,*,#62993,.T.); +#62993 = EDGE_CURVE('',#62994,#62994,#62996,.T.); +#62994 = VERTEX_POINT('',#62995); +#62995 = CARTESIAN_POINT('',(103.3,-125.8,0.)); +#62996 = CIRCLE('',#62997,0.8); +#62997 = AXIS2_PLACEMENT_3D('',#62998,#62999,#63000); +#62998 = CARTESIAN_POINT('',(103.3,-125.,0.)); +#62999 = DIRECTION('',(-0.,0.,-1.)); +#63000 = DIRECTION('',(-0.,-1.,0.)); +#63001 = FACE_BOUND('',#63002,.F.); +#63002 = EDGE_LOOP('',(#63003,#63014,#63022,#63031)); +#63003 = ORIENTED_EDGE('',*,*,#63004,.T.); +#63004 = EDGE_CURVE('',#63005,#63007,#63009,.T.); +#63005 = VERTEX_POINT('',#63006); +#63006 = CARTESIAN_POINT('',(106.8,-125.65,0.)); +#63007 = VERTEX_POINT('',#63008); +#63008 = CARTESIAN_POINT('',(105.8,-125.65,0.)); +#63009 = CIRCLE('',#63010,0.5); +#63010 = AXIS2_PLACEMENT_3D('',#63011,#63012,#63013); +#63011 = CARTESIAN_POINT('',(106.3,-125.65,0.)); +#63012 = DIRECTION('',(-0.,0.,-1.)); +#63013 = DIRECTION('',(-1.,0.,0.)); +#63014 = ORIENTED_EDGE('',*,*,#63015,.T.); +#63015 = EDGE_CURVE('',#63007,#63016,#63018,.T.); +#63016 = VERTEX_POINT('',#63017); +#63017 = CARTESIAN_POINT('',(105.8,-124.35,0.)); +#63018 = LINE('',#63019,#63020); +#63019 = CARTESIAN_POINT('',(105.8,-62.175,0.)); +#63020 = VECTOR('',#63021,1.); +#63021 = DIRECTION('',(-0.,1.,0.)); +#63022 = ORIENTED_EDGE('',*,*,#63023,.T.); +#63023 = EDGE_CURVE('',#63016,#63024,#63026,.T.); +#63024 = VERTEX_POINT('',#63025); +#63025 = CARTESIAN_POINT('',(106.8,-124.35,0.)); +#63026 = CIRCLE('',#63027,0.5); +#63027 = AXIS2_PLACEMENT_3D('',#63028,#63029,#63030); +#63028 = CARTESIAN_POINT('',(106.3,-124.35,0.)); +#63029 = DIRECTION('',(0.,-0.,-1.)); +#63030 = DIRECTION('',(1.,0.,-0.)); +#63031 = ORIENTED_EDGE('',*,*,#63032,.T.); +#63032 = EDGE_CURVE('',#63024,#63005,#63033,.T.); +#63033 = LINE('',#63034,#63035); +#63034 = CARTESIAN_POINT('',(106.8,-62.825,0.)); +#63035 = VECTOR('',#63036,1.); +#63036 = DIRECTION('',(0.,-1.,0.)); +#63037 = FACE_BOUND('',#63038,.F.); +#63038 = EDGE_LOOP('',(#63039,#63050,#63058,#63067)); +#63039 = ORIENTED_EDGE('',*,*,#63040,.T.); +#63040 = EDGE_CURVE('',#63041,#63043,#63045,.T.); +#63041 = VERTEX_POINT('',#63042); +#63042 = CARTESIAN_POINT('',(112.8,-126.,0.)); +#63043 = VERTEX_POINT('',#63044); +#63044 = CARTESIAN_POINT('',(111.8,-126.,0.)); +#63045 = CIRCLE('',#63046,0.5); +#63046 = AXIS2_PLACEMENT_3D('',#63047,#63048,#63049); +#63047 = CARTESIAN_POINT('',(112.3,-126.,0.)); +#63048 = DIRECTION('',(-0.,0.,-1.)); +#63049 = DIRECTION('',(-1.,0.,0.)); +#63050 = ORIENTED_EDGE('',*,*,#63051,.T.); +#63051 = EDGE_CURVE('',#63043,#63052,#63054,.T.); +#63052 = VERTEX_POINT('',#63053); +#63053 = CARTESIAN_POINT('',(111.8,-124.,0.)); +#63054 = LINE('',#63055,#63056); +#63055 = CARTESIAN_POINT('',(111.8,-62.,0.)); +#63056 = VECTOR('',#63057,1.); +#63057 = DIRECTION('',(-0.,1.,0.)); +#63058 = ORIENTED_EDGE('',*,*,#63059,.T.); +#63059 = EDGE_CURVE('',#63052,#63060,#63062,.T.); +#63060 = VERTEX_POINT('',#63061); +#63061 = CARTESIAN_POINT('',(112.8,-124.,0.)); +#63062 = CIRCLE('',#63063,0.5); +#63063 = AXIS2_PLACEMENT_3D('',#63064,#63065,#63066); +#63064 = CARTESIAN_POINT('',(112.3,-124.,0.)); +#63065 = DIRECTION('',(0.,-0.,-1.)); +#63066 = DIRECTION('',(1.,0.,-0.)); +#63067 = ORIENTED_EDGE('',*,*,#63068,.T.); +#63068 = EDGE_CURVE('',#63060,#63041,#63069,.T.); +#63069 = LINE('',#63070,#63071); +#63070 = CARTESIAN_POINT('',(112.8,-63.,0.)); +#63071 = VECTOR('',#63072,1.); +#63072 = DIRECTION('',(0.,-1.,0.)); +#63073 = FACE_BOUND('',#63074,.F.); +#63074 = EDGE_LOOP('',(#63075,#63086,#63094,#63103)); +#63075 = ORIENTED_EDGE('',*,*,#63076,.T.); +#63076 = EDGE_CURVE('',#63077,#63079,#63081,.T.); +#63077 = VERTEX_POINT('',#63078); +#63078 = CARTESIAN_POINT('',(104.55,-121.,0.)); +#63079 = VERTEX_POINT('',#63080); +#63080 = CARTESIAN_POINT('',(104.55,-120.,0.)); +#63081 = CIRCLE('',#63082,0.5); +#63082 = AXIS2_PLACEMENT_3D('',#63083,#63084,#63085); +#63083 = CARTESIAN_POINT('',(104.55,-120.5,0.)); +#63084 = DIRECTION('',(-0.,0.,-1.)); +#63085 = DIRECTION('',(0.,1.,0.)); +#63086 = ORIENTED_EDGE('',*,*,#63087,.T.); +#63087 = EDGE_CURVE('',#63079,#63088,#63090,.T.); +#63088 = VERTEX_POINT('',#63089); +#63089 = CARTESIAN_POINT('',(106.05,-120.,0.)); +#63090 = LINE('',#63091,#63092); +#63091 = CARTESIAN_POINT('',(53.025,-120.,0.)); +#63092 = VECTOR('',#63093,1.); +#63093 = DIRECTION('',(1.,0.,-0.)); +#63094 = ORIENTED_EDGE('',*,*,#63095,.T.); +#63095 = EDGE_CURVE('',#63088,#63096,#63098,.T.); +#63096 = VERTEX_POINT('',#63097); +#63097 = CARTESIAN_POINT('',(106.05,-121.,0.)); +#63098 = CIRCLE('',#63099,0.5); +#63099 = AXIS2_PLACEMENT_3D('',#63100,#63101,#63102); +#63100 = CARTESIAN_POINT('',(106.05,-120.5,0.)); +#63101 = DIRECTION('',(-0.,0.,-1.)); +#63102 = DIRECTION('',(-0.,-1.,0.)); +#63103 = ORIENTED_EDGE('',*,*,#63104,.T.); +#63104 = EDGE_CURVE('',#63096,#63077,#63105,.T.); +#63105 = LINE('',#63106,#63107); +#63106 = CARTESIAN_POINT('',(52.275,-121.,0.)); +#63107 = VECTOR('',#63108,1.); +#63108 = DIRECTION('',(-1.,0.,0.)); +#63109 = FACE_BOUND('',#63110,.F.); +#63110 = EDGE_LOOP('',(#63111)); +#63111 = ORIENTED_EDGE('',*,*,#63112,.T.); +#63112 = EDGE_CURVE('',#63113,#63113,#63115,.T.); +#63113 = VERTEX_POINT('',#63114); +#63114 = CARTESIAN_POINT('',(104.5,-111.375,0.)); +#63115 = CIRCLE('',#63116,0.475); +#63116 = AXIS2_PLACEMENT_3D('',#63117,#63118,#63119); +#63117 = CARTESIAN_POINT('',(104.5,-110.9,0.)); +#63118 = DIRECTION('',(-0.,0.,-1.)); +#63119 = DIRECTION('',(-0.,-1.,0.)); +#63120 = FACE_BOUND('',#63121,.F.); +#63121 = EDGE_LOOP('',(#63122)); +#63122 = ORIENTED_EDGE('',*,*,#63123,.T.); +#63123 = EDGE_CURVE('',#63124,#63124,#63126,.T.); +#63124 = VERTEX_POINT('',#63125); +#63125 = CARTESIAN_POINT('',(120.32,-115.,0.)); +#63126 = CIRCLE('',#63127,0.4); +#63127 = AXIS2_PLACEMENT_3D('',#63128,#63129,#63130); +#63128 = CARTESIAN_POINT('',(120.32,-114.6,0.)); +#63129 = DIRECTION('',(-0.,0.,-1.)); +#63130 = DIRECTION('',(-0.,-1.,0.)); +#63131 = FACE_BOUND('',#63132,.F.); +#63132 = EDGE_LOOP('',(#63133)); +#63133 = ORIENTED_EDGE('',*,*,#63134,.T.); +#63134 = EDGE_CURVE('',#63135,#63135,#63137,.T.); +#63135 = VERTEX_POINT('',#63136); +#63136 = CARTESIAN_POINT('',(104.5,-108.875,0.)); +#63137 = CIRCLE('',#63138,0.475); +#63138 = AXIS2_PLACEMENT_3D('',#63139,#63140,#63141); +#63139 = CARTESIAN_POINT('',(104.5,-108.4,0.)); +#63140 = DIRECTION('',(-0.,0.,-1.)); +#63141 = DIRECTION('',(-0.,-1.,0.)); +#63142 = FACE_BOUND('',#63143,.F.); +#63143 = EDGE_LOOP('',(#63144)); +#63144 = ORIENTED_EDGE('',*,*,#63145,.T.); +#63145 = EDGE_CURVE('',#63146,#63146,#63148,.T.); +#63146 = VERTEX_POINT('',#63147); +#63147 = CARTESIAN_POINT('',(104.5,-106.375,0.)); +#63148 = CIRCLE('',#63149,0.475); +#63149 = AXIS2_PLACEMENT_3D('',#63150,#63151,#63152); +#63150 = CARTESIAN_POINT('',(104.5,-105.9,0.)); +#63151 = DIRECTION('',(-0.,0.,-1.)); +#63152 = DIRECTION('',(-0.,-1.,0.)); +#63153 = FACE_BOUND('',#63154,.F.); +#63154 = EDGE_LOOP('',(#63155)); +#63155 = ORIENTED_EDGE('',*,*,#63156,.T.); +#63156 = EDGE_CURVE('',#63157,#63157,#63159,.T.); +#63157 = VERTEX_POINT('',#63158); +#63158 = CARTESIAN_POINT('',(104.5,-103.875,0.)); +#63159 = CIRCLE('',#63160,0.475); +#63160 = AXIS2_PLACEMENT_3D('',#63161,#63162,#63163); +#63161 = CARTESIAN_POINT('',(104.5,-103.4,0.)); +#63162 = DIRECTION('',(-0.,0.,-1.)); +#63163 = DIRECTION('',(-0.,-1.,0.)); +#63164 = FACE_BOUND('',#63165,.F.); +#63165 = EDGE_LOOP('',(#63166)); +#63166 = ORIENTED_EDGE('',*,*,#63167,.T.); +#63167 = EDGE_CURVE('',#63168,#63168,#63170,.T.); +#63168 = VERTEX_POINT('',#63169); +#63169 = CARTESIAN_POINT('',(115.24,-109.14,0.)); +#63170 = CIRCLE('',#63171,1.6); +#63171 = AXIS2_PLACEMENT_3D('',#63172,#63173,#63174); +#63172 = CARTESIAN_POINT('',(115.24,-107.54,0.)); +#63173 = DIRECTION('',(-0.,0.,-1.)); +#63174 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#63175 = FACE_BOUND('',#63176,.F.); +#63176 = EDGE_LOOP('',(#63177)); +#63177 = ORIENTED_EDGE('',*,*,#63178,.T.); +#63178 = EDGE_CURVE('',#63179,#63179,#63181,.T.); +#63179 = VERTEX_POINT('',#63180); +#63180 = CARTESIAN_POINT('',(120.32,-102.3,0.)); +#63181 = CIRCLE('',#63182,0.4); +#63182 = AXIS2_PLACEMENT_3D('',#63183,#63184,#63185); +#63183 = CARTESIAN_POINT('',(120.32,-101.9,0.)); +#63184 = DIRECTION('',(-0.,0.,-1.)); +#63185 = DIRECTION('',(-0.,-1.,0.)); +#63186 = FACE_BOUND('',#63187,.F.); +#63187 = EDGE_LOOP('',(#63188)); +#63188 = ORIENTED_EDGE('',*,*,#63189,.T.); +#63189 = EDGE_CURVE('',#63190,#63190,#63192,.T.); +#63190 = VERTEX_POINT('',#63191); +#63191 = CARTESIAN_POINT('',(122.86,-115.,0.)); +#63192 = CIRCLE('',#63193,0.4); +#63193 = AXIS2_PLACEMENT_3D('',#63194,#63195,#63196); +#63194 = CARTESIAN_POINT('',(122.86,-114.6,0.)); +#63195 = DIRECTION('',(-0.,0.,-1.)); +#63196 = DIRECTION('',(-0.,-1.,0.)); +#63197 = FACE_BOUND('',#63198,.F.); +#63198 = EDGE_LOOP('',(#63199)); +#63199 = ORIENTED_EDGE('',*,*,#63200,.T.); +#63200 = EDGE_CURVE('',#63201,#63201,#63203,.T.); +#63201 = VERTEX_POINT('',#63202); +#63202 = CARTESIAN_POINT('',(125.4,-115.,0.)); +#63203 = CIRCLE('',#63204,0.4); +#63204 = AXIS2_PLACEMENT_3D('',#63205,#63206,#63207); +#63205 = CARTESIAN_POINT('',(125.4,-114.6,0.)); +#63206 = DIRECTION('',(-0.,0.,-1.)); +#63207 = DIRECTION('',(-0.,-1.,0.)); +#63208 = FACE_BOUND('',#63209,.F.); +#63209 = EDGE_LOOP('',(#63210)); +#63210 = ORIENTED_EDGE('',*,*,#63211,.T.); +#63211 = EDGE_CURVE('',#63212,#63212,#63214,.T.); +#63212 = VERTEX_POINT('',#63213); +#63213 = CARTESIAN_POINT('',(127.94,-115.,0.)); +#63214 = CIRCLE('',#63215,0.4); +#63215 = AXIS2_PLACEMENT_3D('',#63216,#63217,#63218); +#63216 = CARTESIAN_POINT('',(127.94,-114.6,0.)); +#63217 = DIRECTION('',(-0.,0.,-1.)); +#63218 = DIRECTION('',(-0.,-1.,0.)); +#63219 = FACE_BOUND('',#63220,.F.); +#63220 = EDGE_LOOP('',(#63221)); +#63221 = ORIENTED_EDGE('',*,*,#63222,.T.); +#63222 = EDGE_CURVE('',#63223,#63223,#63225,.T.); +#63223 = VERTEX_POINT('',#63224); +#63224 = CARTESIAN_POINT('',(130.48,-115.,0.)); +#63225 = CIRCLE('',#63226,0.4); +#63226 = AXIS2_PLACEMENT_3D('',#63227,#63228,#63229); +#63227 = CARTESIAN_POINT('',(130.48,-114.6,0.)); +#63228 = DIRECTION('',(-0.,0.,-1.)); +#63229 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#63230 = FACE_BOUND('',#63231,.F.); +#63231 = EDGE_LOOP('',(#63232)); +#63232 = ORIENTED_EDGE('',*,*,#63233,.T.); +#63233 = EDGE_CURVE('',#63234,#63234,#63236,.T.); +#63234 = VERTEX_POINT('',#63235); +#63235 = CARTESIAN_POINT('',(133.02,-115.,0.)); +#63236 = CIRCLE('',#63237,0.4); +#63237 = AXIS2_PLACEMENT_3D('',#63238,#63239,#63240); +#63238 = CARTESIAN_POINT('',(133.02,-114.6,0.)); +#63239 = DIRECTION('',(-0.,0.,-1.)); +#63240 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#63241 = FACE_BOUND('',#63242,.F.); +#63242 = EDGE_LOOP('',(#63243)); +#63243 = ORIENTED_EDGE('',*,*,#63244,.T.); +#63244 = EDGE_CURVE('',#63245,#63245,#63247,.T.); +#63245 = VERTEX_POINT('',#63246); +#63246 = CARTESIAN_POINT('',(135.56,-115.,0.)); +#63247 = CIRCLE('',#63248,0.4); +#63248 = AXIS2_PLACEMENT_3D('',#63249,#63250,#63251); +#63249 = CARTESIAN_POINT('',(135.56,-114.6,0.)); +#63250 = DIRECTION('',(-0.,0.,-1.)); +#63251 = DIRECTION('',(-0.,-1.,0.)); +#63252 = FACE_BOUND('',#63253,.F.); +#63253 = EDGE_LOOP('',(#63254)); +#63254 = ORIENTED_EDGE('',*,*,#63255,.T.); +#63255 = EDGE_CURVE('',#63256,#63256,#63258,.T.); +#63256 = VERTEX_POINT('',#63257); +#63257 = CARTESIAN_POINT('',(138.1,-115.,0.)); +#63258 = CIRCLE('',#63259,0.4); +#63259 = AXIS2_PLACEMENT_3D('',#63260,#63261,#63262); +#63260 = CARTESIAN_POINT('',(138.1,-114.6,0.)); +#63261 = DIRECTION('',(-0.,0.,-1.)); +#63262 = DIRECTION('',(-0.,-1.,0.)); +#63263 = FACE_BOUND('',#63264,.F.); +#63264 = EDGE_LOOP('',(#63265)); +#63265 = ORIENTED_EDGE('',*,*,#63266,.T.); +#63266 = EDGE_CURVE('',#63267,#63267,#63269,.T.); +#63267 = VERTEX_POINT('',#63268); +#63268 = CARTESIAN_POINT('',(122.86,-102.3,0.)); +#63269 = CIRCLE('',#63270,0.4); +#63270 = AXIS2_PLACEMENT_3D('',#63271,#63272,#63273); +#63271 = CARTESIAN_POINT('',(122.86,-101.9,0.)); +#63272 = DIRECTION('',(-0.,0.,-1.)); +#63273 = DIRECTION('',(-0.,-1.,0.)); +#63274 = FACE_BOUND('',#63275,.F.); +#63275 = EDGE_LOOP('',(#63276)); +#63276 = ORIENTED_EDGE('',*,*,#63277,.T.); +#63277 = EDGE_CURVE('',#63278,#63278,#63280,.T.); +#63278 = VERTEX_POINT('',#63279); +#63279 = CARTESIAN_POINT('',(125.4,-102.3,0.)); +#63280 = CIRCLE('',#63281,0.4); +#63281 = AXIS2_PLACEMENT_3D('',#63282,#63283,#63284); +#63282 = CARTESIAN_POINT('',(125.4,-101.9,0.)); +#63283 = DIRECTION('',(-0.,0.,-1.)); +#63284 = DIRECTION('',(-0.,-1.,0.)); +#63285 = FACE_BOUND('',#63286,.F.); +#63286 = EDGE_LOOP('',(#63287)); +#63287 = ORIENTED_EDGE('',*,*,#63288,.T.); +#63288 = EDGE_CURVE('',#63289,#63289,#63291,.T.); +#63289 = VERTEX_POINT('',#63290); +#63290 = CARTESIAN_POINT('',(127.94,-102.3,0.)); +#63291 = CIRCLE('',#63292,0.4); +#63292 = AXIS2_PLACEMENT_3D('',#63293,#63294,#63295); +#63293 = CARTESIAN_POINT('',(127.94,-101.9,0.)); +#63294 = DIRECTION('',(-0.,0.,-1.)); +#63295 = DIRECTION('',(-0.,-1.,0.)); +#63296 = FACE_BOUND('',#63297,.F.); +#63297 = EDGE_LOOP('',(#63298)); +#63298 = ORIENTED_EDGE('',*,*,#63299,.T.); +#63299 = EDGE_CURVE('',#63300,#63300,#63302,.T.); +#63300 = VERTEX_POINT('',#63301); +#63301 = CARTESIAN_POINT('',(130.48,-102.3,0.)); +#63302 = CIRCLE('',#63303,0.4); +#63303 = AXIS2_PLACEMENT_3D('',#63304,#63305,#63306); +#63304 = CARTESIAN_POINT('',(130.48,-101.9,0.)); +#63305 = DIRECTION('',(-0.,0.,-1.)); +#63306 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#63307 = FACE_BOUND('',#63308,.F.); +#63308 = EDGE_LOOP('',(#63309)); +#63309 = ORIENTED_EDGE('',*,*,#63310,.T.); +#63310 = EDGE_CURVE('',#63311,#63311,#63313,.T.); +#63311 = VERTEX_POINT('',#63312); +#63312 = CARTESIAN_POINT('',(133.02,-102.3,0.)); +#63313 = CIRCLE('',#63314,0.4); +#63314 = AXIS2_PLACEMENT_3D('',#63315,#63316,#63317); +#63315 = CARTESIAN_POINT('',(133.02,-101.9,0.)); +#63316 = DIRECTION('',(-0.,0.,-1.)); +#63317 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#63318 = FACE_BOUND('',#63319,.F.); +#63319 = EDGE_LOOP('',(#63320)); +#63320 = ORIENTED_EDGE('',*,*,#63321,.T.); +#63321 = EDGE_CURVE('',#63322,#63322,#63324,.T.); +#63322 = VERTEX_POINT('',#63323); +#63323 = CARTESIAN_POINT('',(135.56,-102.3,0.)); +#63324 = CIRCLE('',#63325,0.4); +#63325 = AXIS2_PLACEMENT_3D('',#63326,#63327,#63328); +#63326 = CARTESIAN_POINT('',(135.56,-101.9,0.)); +#63327 = DIRECTION('',(-0.,0.,-1.)); +#63328 = DIRECTION('',(-0.,-1.,0.)); +#63329 = FACE_BOUND('',#63330,.F.); +#63330 = EDGE_LOOP('',(#63331)); +#63331 = ORIENTED_EDGE('',*,*,#63332,.T.); +#63332 = EDGE_CURVE('',#63333,#63333,#63335,.T.); +#63333 = VERTEX_POINT('',#63334); +#63334 = CARTESIAN_POINT('',(138.1,-102.3,0.)); +#63335 = CIRCLE('',#63336,0.4); +#63336 = AXIS2_PLACEMENT_3D('',#63337,#63338,#63339); +#63337 = CARTESIAN_POINT('',(138.1,-101.9,0.)); +#63338 = DIRECTION('',(-0.,0.,-1.)); +#63339 = DIRECTION('',(-0.,-1.,0.)); +#63340 = FACE_BOUND('',#63341,.F.); +#63341 = EDGE_LOOP('',(#63342)); +#63342 = ORIENTED_EDGE('',*,*,#63343,.T.); +#63343 = EDGE_CURVE('',#63344,#63344,#63346,.T.); +#63344 = VERTEX_POINT('',#63345); +#63345 = CARTESIAN_POINT('',(176.5,-130.075,0.)); +#63346 = CIRCLE('',#63347,0.475); +#63347 = AXIS2_PLACEMENT_3D('',#63348,#63349,#63350); +#63348 = CARTESIAN_POINT('',(176.5,-129.6,0.)); +#63349 = DIRECTION('',(-0.,0.,-1.)); +#63350 = DIRECTION('',(-0.,-1.,0.)); +#63351 = FACE_BOUND('',#63352,.F.); +#63352 = EDGE_LOOP('',(#63353)); +#63353 = ORIENTED_EDGE('',*,*,#63354,.T.); +#63354 = EDGE_CURVE('',#63355,#63355,#63357,.T.); +#63355 = VERTEX_POINT('',#63356); +#63356 = CARTESIAN_POINT('',(176.5,-123.975,0.)); +#63357 = CIRCLE('',#63358,0.475); +#63358 = AXIS2_PLACEMENT_3D('',#63359,#63360,#63361); +#63359 = CARTESIAN_POINT('',(176.5,-123.5,0.)); +#63360 = DIRECTION('',(-0.,0.,-1.)); +#63361 = DIRECTION('',(-0.,-1.,0.)); +#63362 = FACE_BOUND('',#63363,.F.); +#63363 = EDGE_LOOP('',(#63364)); +#63364 = ORIENTED_EDGE('',*,*,#63365,.T.); +#63365 = EDGE_CURVE('',#63366,#63366,#63368,.T.); +#63366 = VERTEX_POINT('',#63367); +#63367 = CARTESIAN_POINT('',(166.04,-124.38,0.)); +#63368 = CIRCLE('',#63369,1.6); +#63369 = AXIS2_PLACEMENT_3D('',#63370,#63371,#63372); +#63370 = CARTESIAN_POINT('',(166.04,-122.78,0.)); +#63371 = DIRECTION('',(-0.,0.,-1.)); +#63372 = DIRECTION('',(-0.,-1.,0.)); +#63373 = FACE_BOUND('',#63374,.F.); +#63374 = EDGE_LOOP('',(#63375)); +#63375 = ORIENTED_EDGE('',*,*,#63376,.T.); +#63376 = EDGE_CURVE('',#63377,#63377,#63379,.T.); +#63377 = VERTEX_POINT('',#63378); +#63378 = CARTESIAN_POINT('',(176.5,-121.475,0.)); +#63379 = CIRCLE('',#63380,0.475); +#63380 = AXIS2_PLACEMENT_3D('',#63381,#63382,#63383); +#63381 = CARTESIAN_POINT('',(176.5,-121.,0.)); +#63382 = DIRECTION('',(-0.,0.,-1.)); +#63383 = DIRECTION('',(-0.,-1.,0.)); +#63384 = FACE_BOUND('',#63385,.F.); +#63385 = EDGE_LOOP('',(#63386)); +#63386 = ORIENTED_EDGE('',*,*,#63387,.T.); +#63387 = EDGE_CURVE('',#63388,#63388,#63390,.T.); +#63388 = VERTEX_POINT('',#63389); +#63389 = CARTESIAN_POINT('',(176.5,-118.975,0.)); +#63390 = CIRCLE('',#63391,0.475); +#63391 = AXIS2_PLACEMENT_3D('',#63392,#63393,#63394); +#63392 = CARTESIAN_POINT('',(176.5,-118.5,0.)); +#63393 = DIRECTION('',(-0.,0.,-1.)); +#63394 = DIRECTION('',(-0.,-1.,0.)); +#63395 = FACE_BOUND('',#63396,.F.); +#63396 = EDGE_LOOP('',(#63397)); +#63397 = ORIENTED_EDGE('',*,*,#63398,.T.); +#63398 = EDGE_CURVE('',#63399,#63399,#63401,.T.); +#63399 = VERTEX_POINT('',#63400); +#63400 = CARTESIAN_POINT('',(141.32,-115.,0.)); +#63401 = CIRCLE('',#63402,0.4); +#63402 = AXIS2_PLACEMENT_3D('',#63403,#63404,#63405); +#63403 = CARTESIAN_POINT('',(141.32,-114.6,0.)); +#63404 = DIRECTION('',(-0.,0.,-1.)); +#63405 = DIRECTION('',(-0.,-1.,0.)); +#63406 = FACE_BOUND('',#63407,.F.); +#63407 = EDGE_LOOP('',(#63408)); +#63408 = ORIENTED_EDGE('',*,*,#63409,.T.); +#63409 = EDGE_CURVE('',#63410,#63410,#63412,.T.); +#63410 = VERTEX_POINT('',#63411); +#63411 = CARTESIAN_POINT('',(143.86,-115.,0.)); +#63412 = CIRCLE('',#63413,0.4); +#63413 = AXIS2_PLACEMENT_3D('',#63414,#63415,#63416); +#63414 = CARTESIAN_POINT('',(143.86,-114.6,0.)); +#63415 = DIRECTION('',(-0.,0.,-1.)); +#63416 = DIRECTION('',(-0.,-1.,0.)); +#63417 = FACE_BOUND('',#63418,.F.); +#63418 = EDGE_LOOP('',(#63419)); +#63419 = ORIENTED_EDGE('',*,*,#63420,.T.); +#63420 = EDGE_CURVE('',#63421,#63421,#63423,.T.); +#63421 = VERTEX_POINT('',#63422); +#63422 = CARTESIAN_POINT('',(146.4,-115.,0.)); +#63423 = CIRCLE('',#63424,0.4); +#63424 = AXIS2_PLACEMENT_3D('',#63425,#63426,#63427); +#63425 = CARTESIAN_POINT('',(146.4,-114.6,0.)); +#63426 = DIRECTION('',(-0.,0.,-1.)); +#63427 = DIRECTION('',(-0.,-1.,0.)); +#63428 = FACE_BOUND('',#63429,.F.); +#63429 = EDGE_LOOP('',(#63430)); +#63430 = ORIENTED_EDGE('',*,*,#63431,.T.); +#63431 = EDGE_CURVE('',#63432,#63432,#63434,.T.); +#63432 = VERTEX_POINT('',#63433); +#63433 = CARTESIAN_POINT('',(148.94,-115.,0.)); +#63434 = CIRCLE('',#63435,0.4); +#63435 = AXIS2_PLACEMENT_3D('',#63436,#63437,#63438); +#63436 = CARTESIAN_POINT('',(148.94,-114.6,0.)); +#63437 = DIRECTION('',(-0.,0.,-1.)); +#63438 = DIRECTION('',(-0.,-1.,0.)); +#63439 = FACE_BOUND('',#63440,.F.); +#63440 = EDGE_LOOP('',(#63441)); +#63441 = ORIENTED_EDGE('',*,*,#63442,.T.); +#63442 = EDGE_CURVE('',#63443,#63443,#63445,.T.); +#63443 = VERTEX_POINT('',#63444); +#63444 = CARTESIAN_POINT('',(151.48,-115.,0.)); +#63445 = CIRCLE('',#63446,0.4); +#63446 = AXIS2_PLACEMENT_3D('',#63447,#63448,#63449); +#63447 = CARTESIAN_POINT('',(151.48,-114.6,0.)); +#63448 = DIRECTION('',(-0.,0.,-1.)); +#63449 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#63450 = FACE_BOUND('',#63451,.F.); +#63451 = EDGE_LOOP('',(#63452)); +#63452 = ORIENTED_EDGE('',*,*,#63453,.T.); +#63453 = EDGE_CURVE('',#63454,#63454,#63456,.T.); +#63454 = VERTEX_POINT('',#63455); +#63455 = CARTESIAN_POINT('',(154.02,-115.,0.)); +#63456 = CIRCLE('',#63457,0.4); +#63457 = AXIS2_PLACEMENT_3D('',#63458,#63459,#63460); +#63458 = CARTESIAN_POINT('',(154.02,-114.6,0.)); +#63459 = DIRECTION('',(-0.,0.,-1.)); +#63460 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#63461 = FACE_BOUND('',#63462,.F.); +#63462 = EDGE_LOOP('',(#63463)); +#63463 = ORIENTED_EDGE('',*,*,#63464,.T.); +#63464 = EDGE_CURVE('',#63465,#63465,#63467,.T.); +#63465 = VERTEX_POINT('',#63466); +#63466 = CARTESIAN_POINT('',(156.56,-115.,0.)); +#63467 = CIRCLE('',#63468,0.4); +#63468 = AXIS2_PLACEMENT_3D('',#63469,#63470,#63471); +#63469 = CARTESIAN_POINT('',(156.56,-114.6,0.)); +#63470 = DIRECTION('',(-0.,0.,-1.)); +#63471 = DIRECTION('',(-0.,-1.,0.)); +#63472 = FACE_BOUND('',#63473,.F.); +#63473 = EDGE_LOOP('',(#63474)); +#63474 = ORIENTED_EDGE('',*,*,#63475,.T.); +#63475 = EDGE_CURVE('',#63476,#63476,#63478,.T.); +#63476 = VERTEX_POINT('',#63477); +#63477 = CARTESIAN_POINT('',(141.32,-102.3,0.)); +#63478 = CIRCLE('',#63479,0.4); +#63479 = AXIS2_PLACEMENT_3D('',#63480,#63481,#63482); +#63480 = CARTESIAN_POINT('',(141.32,-101.9,0.)); +#63481 = DIRECTION('',(-0.,0.,-1.)); +#63482 = DIRECTION('',(-0.,-1.,0.)); +#63483 = FACE_BOUND('',#63484,.F.); +#63484 = EDGE_LOOP('',(#63485)); +#63485 = ORIENTED_EDGE('',*,*,#63486,.T.); +#63486 = EDGE_CURVE('',#63487,#63487,#63489,.T.); +#63487 = VERTEX_POINT('',#63488); +#63488 = CARTESIAN_POINT('',(143.86,-102.3,0.)); +#63489 = CIRCLE('',#63490,0.4); +#63490 = AXIS2_PLACEMENT_3D('',#63491,#63492,#63493); +#63491 = CARTESIAN_POINT('',(143.86,-101.9,0.)); +#63492 = DIRECTION('',(-0.,0.,-1.)); +#63493 = DIRECTION('',(-0.,-1.,0.)); +#63494 = FACE_BOUND('',#63495,.F.); +#63495 = EDGE_LOOP('',(#63496)); +#63496 = ORIENTED_EDGE('',*,*,#63497,.T.); +#63497 = EDGE_CURVE('',#63498,#63498,#63500,.T.); +#63498 = VERTEX_POINT('',#63499); +#63499 = CARTESIAN_POINT('',(146.4,-102.3,0.)); +#63500 = CIRCLE('',#63501,0.4); +#63501 = AXIS2_PLACEMENT_3D('',#63502,#63503,#63504); +#63502 = CARTESIAN_POINT('',(146.4,-101.9,0.)); +#63503 = DIRECTION('',(-0.,0.,-1.)); +#63504 = DIRECTION('',(-0.,-1.,0.)); +#63505 = FACE_BOUND('',#63506,.F.); +#63506 = EDGE_LOOP('',(#63507)); +#63507 = ORIENTED_EDGE('',*,*,#63508,.T.); +#63508 = EDGE_CURVE('',#63509,#63509,#63511,.T.); +#63509 = VERTEX_POINT('',#63510); +#63510 = CARTESIAN_POINT('',(148.94,-102.3,0.)); +#63511 = CIRCLE('',#63512,0.4); +#63512 = AXIS2_PLACEMENT_3D('',#63513,#63514,#63515); +#63513 = CARTESIAN_POINT('',(148.94,-101.9,0.)); +#63514 = DIRECTION('',(-0.,0.,-1.)); +#63515 = DIRECTION('',(-0.,-1.,0.)); +#63516 = FACE_BOUND('',#63517,.F.); +#63517 = EDGE_LOOP('',(#63518)); +#63518 = ORIENTED_EDGE('',*,*,#63519,.T.); +#63519 = EDGE_CURVE('',#63520,#63520,#63522,.T.); +#63520 = VERTEX_POINT('',#63521); +#63521 = CARTESIAN_POINT('',(151.48,-102.3,0.)); +#63522 = CIRCLE('',#63523,0.4); +#63523 = AXIS2_PLACEMENT_3D('',#63524,#63525,#63526); +#63524 = CARTESIAN_POINT('',(151.48,-101.9,0.)); +#63525 = DIRECTION('',(-0.,0.,-1.)); +#63526 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#63527 = FACE_BOUND('',#63528,.F.); +#63528 = EDGE_LOOP('',(#63529)); +#63529 = ORIENTED_EDGE('',*,*,#63530,.T.); +#63530 = EDGE_CURVE('',#63531,#63531,#63533,.T.); +#63531 = VERTEX_POINT('',#63532); +#63532 = CARTESIAN_POINT('',(154.02,-102.3,0.)); +#63533 = CIRCLE('',#63534,0.4); +#63534 = AXIS2_PLACEMENT_3D('',#63535,#63536,#63537); +#63535 = CARTESIAN_POINT('',(154.02,-101.9,0.)); +#63536 = DIRECTION('',(-0.,0.,-1.)); +#63537 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#63538 = FACE_BOUND('',#63539,.F.); +#63539 = EDGE_LOOP('',(#63540)); +#63540 = ORIENTED_EDGE('',*,*,#63541,.T.); +#63541 = EDGE_CURVE('',#63542,#63542,#63544,.T.); +#63542 = VERTEX_POINT('',#63543); +#63543 = CARTESIAN_POINT('',(156.56,-102.3,0.)); +#63544 = CIRCLE('',#63545,0.4); +#63545 = AXIS2_PLACEMENT_3D('',#63546,#63547,#63548); +#63546 = CARTESIAN_POINT('',(156.56,-101.9,0.)); +#63547 = DIRECTION('',(-0.,0.,-1.)); +#63548 = DIRECTION('',(-0.,-1.,0.)); +#63549 = FACE_BOUND('',#63550,.F.); +#63550 = EDGE_LOOP('',(#63551)); +#63551 = ORIENTED_EDGE('',*,*,#63552,.T.); +#63552 = EDGE_CURVE('',#63553,#63553,#63555,.T.); +#63553 = VERTEX_POINT('',#63554); +#63554 = CARTESIAN_POINT('',(159.1,-115.,0.)); +#63555 = CIRCLE('',#63556,0.4); +#63556 = AXIS2_PLACEMENT_3D('',#63557,#63558,#63559); +#63557 = CARTESIAN_POINT('',(159.1,-114.6,0.)); +#63558 = DIRECTION('',(-0.,0.,-1.)); +#63559 = DIRECTION('',(-0.,-1.,0.)); +#63560 = FACE_BOUND('',#63561,.F.); +#63561 = EDGE_LOOP('',(#63562)); +#63562 = ORIENTED_EDGE('',*,*,#63563,.T.); +#63563 = EDGE_CURVE('',#63564,#63564,#63566,.T.); +#63564 = VERTEX_POINT('',#63565); +#63565 = CARTESIAN_POINT('',(176.5,-111.375,0.)); +#63566 = CIRCLE('',#63567,0.475); +#63567 = AXIS2_PLACEMENT_3D('',#63568,#63569,#63570); +#63568 = CARTESIAN_POINT('',(176.5,-110.9,0.)); +#63569 = DIRECTION('',(-0.,0.,-1.)); +#63570 = DIRECTION('',(-0.,-1.,0.)); +#63571 = FACE_BOUND('',#63572,.F.); +#63572 = EDGE_LOOP('',(#63573)); +#63573 = ORIENTED_EDGE('',*,*,#63574,.T.); +#63574 = EDGE_CURVE('',#63575,#63575,#63577,.T.); +#63575 = VERTEX_POINT('',#63576); +#63576 = CARTESIAN_POINT('',(159.1,-102.3,0.)); +#63577 = CIRCLE('',#63578,0.4); +#63578 = AXIS2_PLACEMENT_3D('',#63579,#63580,#63581); +#63579 = CARTESIAN_POINT('',(159.1,-101.9,0.)); +#63580 = DIRECTION('',(-0.,0.,-1.)); +#63581 = DIRECTION('',(-0.,-1.,0.)); +#63582 = FACE_BOUND('',#63583,.F.); +#63583 = EDGE_LOOP('',(#63584)); +#63584 = ORIENTED_EDGE('',*,*,#63585,.T.); +#63585 = EDGE_CURVE('',#63586,#63586,#63588,.T.); +#63586 = VERTEX_POINT('',#63587); +#63587 = CARTESIAN_POINT('',(176.5,-108.875,0.)); +#63588 = CIRCLE('',#63589,0.475); +#63589 = AXIS2_PLACEMENT_3D('',#63590,#63591,#63592); +#63590 = CARTESIAN_POINT('',(176.5,-108.4,0.)); +#63591 = DIRECTION('',(-0.,0.,-1.)); +#63592 = DIRECTION('',(-0.,-1.,0.)); +#63593 = FACE_BOUND('',#63594,.F.); +#63594 = EDGE_LOOP('',(#63595)); +#63595 = ORIENTED_EDGE('',*,*,#63596,.T.); +#63596 = EDGE_CURVE('',#63597,#63597,#63599,.T.); +#63597 = VERTEX_POINT('',#63598); +#63598 = CARTESIAN_POINT('',(176.5,-106.375,0.)); +#63599 = CIRCLE('',#63600,0.475); +#63600 = AXIS2_PLACEMENT_3D('',#63601,#63602,#63603); +#63601 = CARTESIAN_POINT('',(176.5,-105.9,0.)); +#63602 = DIRECTION('',(-0.,0.,-1.)); +#63603 = DIRECTION('',(-0.,-1.,0.)); +#63604 = FACE_BOUND('',#63605,.F.); +#63605 = EDGE_LOOP('',(#63606)); +#63606 = ORIENTED_EDGE('',*,*,#63607,.T.); +#63607 = EDGE_CURVE('',#63608,#63608,#63610,.T.); +#63608 = VERTEX_POINT('',#63609); +#63609 = CARTESIAN_POINT('',(176.5,-103.875,0.)); +#63610 = CIRCLE('',#63611,0.475); +#63611 = AXIS2_PLACEMENT_3D('',#63612,#63613,#63614); +#63612 = CARTESIAN_POINT('',(176.5,-103.4,0.)); +#63613 = DIRECTION('',(-0.,0.,-1.)); +#63614 = DIRECTION('',(-0.,-1.,0.)); +#63615 = PLANE('',#63616); +#63616 = AXIS2_PLACEMENT_3D('',#63617,#63618,#63619); +#63617 = CARTESIAN_POINT('',(0.,0.,0.)); +#63618 = DIRECTION('',(0.,0.,1.)); +#63619 = DIRECTION('',(1.,0.,-0.)); +#63620 = ADVANCED_FACE('',(#63621,#63632,#63643,#63679,#63690,#63726, + #63737,#63773,#63809,#63820,#63831,#63842,#63853,#63864,#63875, + #63886,#63897,#63908,#63919,#63930,#63941,#63952,#63988,#63999, + #64035,#64071,#64107,#64118,#64129,#64140,#64151,#64162,#64173, + #64184,#64195,#64206,#64217,#64228,#64239,#64250,#64261,#64272, + #64283,#64294,#64305,#64316,#64327,#64338,#64349,#64360,#64371, + #64382,#64393,#64404,#64415,#64426,#64437,#64448,#64459,#64470, + #64481,#64492,#64503,#64514,#64525,#64536,#64547,#64558,#64569, + #64580,#64591,#64602),#64613,.T.); +#63621 = FACE_BOUND('',#63622,.T.); +#63622 = EDGE_LOOP('',(#63623,#63624,#63625,#63631)); +#63623 = ORIENTED_EDGE('',*,*,#62534,.F.); +#63624 = ORIENTED_EDGE('',*,*,#62574,.F.); +#63625 = ORIENTED_EDGE('',*,*,#63626,.F.); +#63626 = EDGE_CURVE('',#62597,#62567,#63627,.T.); +#63627 = LINE('',#63628,#63629); +#63628 = CARTESIAN_POINT('',(100.,-100.,1.51)); +#63629 = VECTOR('',#63630,1.); +#63630 = DIRECTION('',(1.,0.,0.)); +#63631 = ORIENTED_EDGE('',*,*,#62596,.F.); +#63632 = FACE_BOUND('',#63633,.T.); +#63633 = EDGE_LOOP('',(#63634)); +#63634 = ORIENTED_EDGE('',*,*,#63635,.T.); +#63635 = EDGE_CURVE('',#63636,#63636,#63638,.T.); +#63636 = VERTEX_POINT('',#63637); +#63637 = CARTESIAN_POINT('',(113.97,-157.4,1.51)); +#63638 = CIRCLE('',#63639,1.6); +#63639 = AXIS2_PLACEMENT_3D('',#63640,#63641,#63642); +#63640 = CARTESIAN_POINT('',(113.97,-155.8,1.51)); +#63641 = DIRECTION('',(-0.,0.,-1.)); +#63642 = DIRECTION('',(-0.,-1.,0.)); +#63643 = FACE_BOUND('',#63644,.T.); +#63644 = EDGE_LOOP('',(#63645,#63656,#63664,#63673)); +#63645 = ORIENTED_EDGE('',*,*,#63646,.T.); +#63646 = EDGE_CURVE('',#63647,#63649,#63651,.T.); +#63647 = VERTEX_POINT('',#63648); +#63648 = CARTESIAN_POINT('',(102.05,-148.62,1.51)); +#63649 = VERTEX_POINT('',#63650); +#63650 = CARTESIAN_POINT('',(102.05,-148.02,1.51)); +#63651 = CIRCLE('',#63652,0.3); +#63652 = AXIS2_PLACEMENT_3D('',#63653,#63654,#63655); +#63653 = CARTESIAN_POINT('',(102.05,-148.32,1.51)); +#63654 = DIRECTION('',(-0.,0.,-1.)); +#63655 = DIRECTION('',(0.,1.,0.)); +#63656 = ORIENTED_EDGE('',*,*,#63657,.T.); +#63657 = EDGE_CURVE('',#63649,#63658,#63660,.T.); +#63658 = VERTEX_POINT('',#63659); +#63659 = CARTESIAN_POINT('',(102.65,-148.02,1.51)); +#63660 = LINE('',#63661,#63662); +#63661 = CARTESIAN_POINT('',(51.325,-148.02,1.51)); +#63662 = VECTOR('',#63663,1.); +#63663 = DIRECTION('',(1.,0.,-0.)); +#63664 = ORIENTED_EDGE('',*,*,#63665,.T.); +#63665 = EDGE_CURVE('',#63658,#63666,#63668,.T.); +#63666 = VERTEX_POINT('',#63667); +#63667 = CARTESIAN_POINT('',(102.65,-148.62,1.51)); +#63668 = CIRCLE('',#63669,0.3); +#63669 = AXIS2_PLACEMENT_3D('',#63670,#63671,#63672); +#63670 = CARTESIAN_POINT('',(102.65,-148.32,1.51)); +#63671 = DIRECTION('',(-0.,0.,-1.)); +#63672 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#63673 = ORIENTED_EDGE('',*,*,#63674,.T.); +#63674 = EDGE_CURVE('',#63666,#63647,#63675,.T.); +#63675 = LINE('',#63676,#63677); +#63676 = CARTESIAN_POINT('',(51.025,-148.62,1.51)); +#63677 = VECTOR('',#63678,1.); +#63678 = DIRECTION('',(-1.,0.,0.)); +#63679 = FACE_BOUND('',#63680,.T.); +#63680 = EDGE_LOOP('',(#63681)); +#63681 = ORIENTED_EDGE('',*,*,#63682,.T.); +#63682 = EDGE_CURVE('',#63683,#63683,#63685,.T.); +#63683 = VERTEX_POINT('',#63684); +#63684 = CARTESIAN_POINT('',(106.,-147.215,1.51)); +#63685 = CIRCLE('',#63686,0.325); +#63686 = AXIS2_PLACEMENT_3D('',#63687,#63688,#63689); +#63687 = CARTESIAN_POINT('',(106.,-146.89,1.51)); +#63688 = DIRECTION('',(-0.,0.,-1.)); +#63689 = DIRECTION('',(-0.,-1.,0.)); +#63690 = FACE_BOUND('',#63691,.T.); +#63691 = EDGE_LOOP('',(#63692,#63703,#63711,#63720)); +#63692 = ORIENTED_EDGE('',*,*,#63693,.T.); +#63693 = EDGE_CURVE('',#63694,#63696,#63698,.T.); +#63694 = VERTEX_POINT('',#63695); +#63695 = CARTESIAN_POINT('',(105.98,-148.62,1.51)); +#63696 = VERTEX_POINT('',#63697); +#63697 = CARTESIAN_POINT('',(105.98,-148.02,1.51)); +#63698 = CIRCLE('',#63699,0.3); +#63699 = AXIS2_PLACEMENT_3D('',#63700,#63701,#63702); +#63700 = CARTESIAN_POINT('',(105.98,-148.32,1.51)); +#63701 = DIRECTION('',(-0.,0.,-1.)); +#63702 = DIRECTION('',(0.,1.,0.)); +#63703 = ORIENTED_EDGE('',*,*,#63704,.T.); +#63704 = EDGE_CURVE('',#63696,#63705,#63707,.T.); +#63705 = VERTEX_POINT('',#63706); +#63706 = CARTESIAN_POINT('',(107.08,-148.02,1.51)); +#63707 = LINE('',#63708,#63709); +#63708 = CARTESIAN_POINT('',(53.54,-148.02,1.51)); +#63709 = VECTOR('',#63710,1.); +#63710 = DIRECTION('',(1.,0.,-0.)); +#63711 = ORIENTED_EDGE('',*,*,#63712,.T.); +#63712 = EDGE_CURVE('',#63705,#63713,#63715,.T.); +#63713 = VERTEX_POINT('',#63714); +#63714 = CARTESIAN_POINT('',(107.08,-148.62,1.51)); +#63715 = CIRCLE('',#63716,0.3); +#63716 = AXIS2_PLACEMENT_3D('',#63717,#63718,#63719); +#63717 = CARTESIAN_POINT('',(107.08,-148.32,1.51)); +#63718 = DIRECTION('',(-0.,0.,-1.)); +#63719 = DIRECTION('',(-0.,-1.,0.)); +#63720 = ORIENTED_EDGE('',*,*,#63721,.T.); +#63721 = EDGE_CURVE('',#63713,#63694,#63722,.T.); +#63722 = LINE('',#63723,#63724); +#63723 = CARTESIAN_POINT('',(52.99,-148.62,1.51)); +#63724 = VECTOR('',#63725,1.); +#63725 = DIRECTION('',(-1.,0.,0.)); +#63726 = FACE_BOUND('',#63727,.T.); +#63727 = EDGE_LOOP('',(#63728)); +#63728 = ORIENTED_EDGE('',*,*,#63729,.T.); +#63729 = EDGE_CURVE('',#63730,#63730,#63732,.T.); +#63730 = VERTEX_POINT('',#63731); +#63731 = CARTESIAN_POINT('',(106.,-141.435,1.51)); +#63732 = CIRCLE('',#63733,0.325); +#63733 = AXIS2_PLACEMENT_3D('',#63734,#63735,#63736); +#63734 = CARTESIAN_POINT('',(106.,-141.11,1.51)); +#63735 = DIRECTION('',(-0.,0.,-1.)); +#63736 = DIRECTION('',(-0.,-1.,0.)); +#63737 = FACE_BOUND('',#63738,.T.); +#63738 = EDGE_LOOP('',(#63739,#63750,#63758,#63767)); +#63739 = ORIENTED_EDGE('',*,*,#63740,.T.); +#63740 = EDGE_CURVE('',#63741,#63743,#63745,.T.); +#63741 = VERTEX_POINT('',#63742); +#63742 = CARTESIAN_POINT('',(102.05,-139.98,1.51)); +#63743 = VERTEX_POINT('',#63744); +#63744 = CARTESIAN_POINT('',(102.05,-139.38,1.51)); +#63745 = CIRCLE('',#63746,0.3); +#63746 = AXIS2_PLACEMENT_3D('',#63747,#63748,#63749); +#63747 = CARTESIAN_POINT('',(102.05,-139.68,1.51)); +#63748 = DIRECTION('',(-0.,0.,-1.)); +#63749 = DIRECTION('',(0.,1.,0.)); +#63750 = ORIENTED_EDGE('',*,*,#63751,.T.); +#63751 = EDGE_CURVE('',#63743,#63752,#63754,.T.); +#63752 = VERTEX_POINT('',#63753); +#63753 = CARTESIAN_POINT('',(102.65,-139.38,1.51)); +#63754 = LINE('',#63755,#63756); +#63755 = CARTESIAN_POINT('',(51.325,-139.38,1.51)); +#63756 = VECTOR('',#63757,1.); +#63757 = DIRECTION('',(1.,0.,-0.)); +#63758 = ORIENTED_EDGE('',*,*,#63759,.T.); +#63759 = EDGE_CURVE('',#63752,#63760,#63762,.T.); +#63760 = VERTEX_POINT('',#63761); +#63761 = CARTESIAN_POINT('',(102.65,-139.98,1.51)); +#63762 = CIRCLE('',#63763,0.3); +#63763 = AXIS2_PLACEMENT_3D('',#63764,#63765,#63766); +#63764 = CARTESIAN_POINT('',(102.65,-139.68,1.51)); +#63765 = DIRECTION('',(-0.,0.,-1.)); +#63766 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#63767 = ORIENTED_EDGE('',*,*,#63768,.T.); +#63768 = EDGE_CURVE('',#63760,#63741,#63769,.T.); +#63769 = LINE('',#63770,#63771); +#63770 = CARTESIAN_POINT('',(51.025,-139.98,1.51)); +#63771 = VECTOR('',#63772,1.); +#63772 = DIRECTION('',(-1.,0.,0.)); +#63773 = FACE_BOUND('',#63774,.T.); +#63774 = EDGE_LOOP('',(#63775,#63786,#63794,#63803)); +#63775 = ORIENTED_EDGE('',*,*,#63776,.T.); +#63776 = EDGE_CURVE('',#63777,#63779,#63781,.T.); +#63777 = VERTEX_POINT('',#63778); +#63778 = CARTESIAN_POINT('',(105.98,-139.98,1.51)); +#63779 = VERTEX_POINT('',#63780); +#63780 = CARTESIAN_POINT('',(105.98,-139.38,1.51)); +#63781 = CIRCLE('',#63782,0.3); +#63782 = AXIS2_PLACEMENT_3D('',#63783,#63784,#63785); +#63783 = CARTESIAN_POINT('',(105.98,-139.68,1.51)); +#63784 = DIRECTION('',(-0.,0.,-1.)); +#63785 = DIRECTION('',(0.,1.,0.)); +#63786 = ORIENTED_EDGE('',*,*,#63787,.T.); +#63787 = EDGE_CURVE('',#63779,#63788,#63790,.T.); +#63788 = VERTEX_POINT('',#63789); +#63789 = CARTESIAN_POINT('',(107.08,-139.38,1.51)); +#63790 = LINE('',#63791,#63792); +#63791 = CARTESIAN_POINT('',(53.54,-139.38,1.51)); +#63792 = VECTOR('',#63793,1.); +#63793 = DIRECTION('',(1.,0.,-0.)); +#63794 = ORIENTED_EDGE('',*,*,#63795,.T.); +#63795 = EDGE_CURVE('',#63788,#63796,#63798,.T.); +#63796 = VERTEX_POINT('',#63797); +#63797 = CARTESIAN_POINT('',(107.08,-139.98,1.51)); +#63798 = CIRCLE('',#63799,0.3); +#63799 = AXIS2_PLACEMENT_3D('',#63800,#63801,#63802); +#63800 = CARTESIAN_POINT('',(107.08,-139.68,1.51)); +#63801 = DIRECTION('',(-0.,0.,-1.)); +#63802 = DIRECTION('',(-0.,-1.,0.)); +#63803 = ORIENTED_EDGE('',*,*,#63804,.T.); +#63804 = EDGE_CURVE('',#63796,#63777,#63805,.T.); +#63805 = LINE('',#63806,#63807); +#63806 = CARTESIAN_POINT('',(52.99,-139.98,1.51)); +#63807 = VECTOR('',#63808,1.); +#63808 = DIRECTION('',(-1.,0.,0.)); +#63809 = FACE_BOUND('',#63810,.T.); +#63810 = EDGE_LOOP('',(#63811)); +#63811 = ORIENTED_EDGE('',*,*,#63812,.T.); +#63812 = EDGE_CURVE('',#63813,#63813,#63815,.T.); +#63813 = VERTEX_POINT('',#63814); +#63814 = CARTESIAN_POINT('',(118.,-135.5,1.51)); +#63815 = CIRCLE('',#63816,0.5); +#63816 = AXIS2_PLACEMENT_3D('',#63817,#63818,#63819); +#63817 = CARTESIAN_POINT('',(118.,-135.,1.51)); +#63818 = DIRECTION('',(-0.,0.,-1.)); +#63819 = DIRECTION('',(-0.,-1.,0.)); +#63820 = FACE_BOUND('',#63821,.T.); +#63821 = EDGE_LOOP('',(#63822)); +#63822 = ORIENTED_EDGE('',*,*,#63823,.T.); +#63823 = EDGE_CURVE('',#63824,#63824,#63826,.T.); +#63824 = VERTEX_POINT('',#63825); +#63825 = CARTESIAN_POINT('',(120.54,-135.5,1.51)); +#63826 = CIRCLE('',#63827,0.5); +#63827 = AXIS2_PLACEMENT_3D('',#63828,#63829,#63830); +#63828 = CARTESIAN_POINT('',(120.54,-135.,1.51)); +#63829 = DIRECTION('',(-0.,0.,-1.)); +#63830 = DIRECTION('',(-0.,-1.,0.)); +#63831 = FACE_BOUND('',#63832,.T.); +#63832 = EDGE_LOOP('',(#63833)); +#63833 = ORIENTED_EDGE('',*,*,#63834,.T.); +#63834 = EDGE_CURVE('',#63835,#63835,#63837,.T.); +#63835 = VERTEX_POINT('',#63836); +#63836 = CARTESIAN_POINT('',(123.08,-135.5,1.51)); +#63837 = CIRCLE('',#63838,0.5); +#63838 = AXIS2_PLACEMENT_3D('',#63839,#63840,#63841); +#63839 = CARTESIAN_POINT('',(123.08,-135.,1.51)); +#63840 = DIRECTION('',(-0.,0.,-1.)); +#63841 = DIRECTION('',(-0.,-1.,0.)); +#63842 = FACE_BOUND('',#63843,.T.); +#63843 = EDGE_LOOP('',(#63844)); +#63844 = ORIENTED_EDGE('',*,*,#63845,.T.); +#63845 = EDGE_CURVE('',#63846,#63846,#63848,.T.); +#63846 = VERTEX_POINT('',#63847); +#63847 = CARTESIAN_POINT('',(177.5,-160.12,1.51)); +#63848 = CIRCLE('',#63849,0.5); +#63849 = AXIS2_PLACEMENT_3D('',#63850,#63851,#63852); +#63850 = CARTESIAN_POINT('',(177.5,-159.62,1.51)); +#63851 = DIRECTION('',(-0.,0.,-1.)); +#63852 = DIRECTION('',(-0.,-1.,0.)); +#63853 = FACE_BOUND('',#63854,.T.); +#63854 = EDGE_LOOP('',(#63855)); +#63855 = ORIENTED_EDGE('',*,*,#63856,.T.); +#63856 = EDGE_CURVE('',#63857,#63857,#63859,.T.); +#63857 = VERTEX_POINT('',#63858); +#63858 = CARTESIAN_POINT('',(177.5,-157.58,1.51)); +#63859 = CIRCLE('',#63860,0.5); +#63860 = AXIS2_PLACEMENT_3D('',#63861,#63862,#63863); +#63861 = CARTESIAN_POINT('',(177.5,-157.08,1.51)); +#63862 = DIRECTION('',(-0.,0.,-1.)); +#63863 = DIRECTION('',(-0.,-1.,0.)); +#63864 = FACE_BOUND('',#63865,.T.); +#63865 = EDGE_LOOP('',(#63866)); +#63866 = ORIENTED_EDGE('',*,*,#63867,.T.); +#63867 = EDGE_CURVE('',#63868,#63868,#63870,.T.); +#63868 = VERTEX_POINT('',#63869); +#63869 = CARTESIAN_POINT('',(177.5,-155.04,1.51)); +#63870 = CIRCLE('',#63871,0.5); +#63871 = AXIS2_PLACEMENT_3D('',#63872,#63873,#63874); +#63872 = CARTESIAN_POINT('',(177.5,-154.54,1.51)); +#63873 = DIRECTION('',(-0.,0.,-1.)); +#63874 = DIRECTION('',(-0.,-1.,0.)); +#63875 = FACE_BOUND('',#63876,.T.); +#63876 = EDGE_LOOP('',(#63877)); +#63877 = ORIENTED_EDGE('',*,*,#63878,.T.); +#63878 = EDGE_CURVE('',#63879,#63879,#63881,.T.); +#63879 = VERTEX_POINT('',#63880); +#63880 = CARTESIAN_POINT('',(166.04,-152.32,1.51)); +#63881 = CIRCLE('',#63882,1.6); +#63882 = AXIS2_PLACEMENT_3D('',#63883,#63884,#63885); +#63883 = CARTESIAN_POINT('',(166.04,-150.72,1.51)); +#63884 = DIRECTION('',(-0.,0.,-1.)); +#63885 = DIRECTION('',(-0.,-1.,0.)); +#63886 = FACE_BOUND('',#63887,.T.); +#63887 = EDGE_LOOP('',(#63888)); +#63888 = ORIENTED_EDGE('',*,*,#63889,.T.); +#63889 = EDGE_CURVE('',#63890,#63890,#63892,.T.); +#63890 = VERTEX_POINT('',#63891); +#63891 = CARTESIAN_POINT('',(177.5,-152.5,1.51)); +#63892 = CIRCLE('',#63893,0.5); +#63893 = AXIS2_PLACEMENT_3D('',#63894,#63895,#63896); +#63894 = CARTESIAN_POINT('',(177.5,-152.,1.51)); +#63895 = DIRECTION('',(-0.,0.,-1.)); +#63896 = DIRECTION('',(-0.,-1.,0.)); +#63897 = FACE_BOUND('',#63898,.T.); +#63898 = EDGE_LOOP('',(#63899)); +#63899 = ORIENTED_EDGE('',*,*,#63900,.T.); +#63900 = EDGE_CURVE('',#63901,#63901,#63903,.T.); +#63901 = VERTEX_POINT('',#63902); +#63902 = CARTESIAN_POINT('',(176.5,-146.175,1.51)); +#63903 = CIRCLE('',#63904,0.475); +#63904 = AXIS2_PLACEMENT_3D('',#63905,#63906,#63907); +#63905 = CARTESIAN_POINT('',(176.5,-145.7,1.51)); +#63906 = DIRECTION('',(-0.,0.,-1.)); +#63907 = DIRECTION('',(-0.,-1.,0.)); +#63908 = FACE_BOUND('',#63909,.T.); +#63909 = EDGE_LOOP('',(#63910)); +#63910 = ORIENTED_EDGE('',*,*,#63911,.T.); +#63911 = EDGE_CURVE('',#63912,#63912,#63914,.T.); +#63912 = VERTEX_POINT('',#63913); +#63913 = CARTESIAN_POINT('',(176.5,-143.675,1.51)); +#63914 = CIRCLE('',#63915,0.475); +#63915 = AXIS2_PLACEMENT_3D('',#63916,#63917,#63918); +#63916 = CARTESIAN_POINT('',(176.5,-143.2,1.51)); +#63917 = DIRECTION('',(-0.,0.,-1.)); +#63918 = DIRECTION('',(-0.,-1.,0.)); +#63919 = FACE_BOUND('',#63920,.T.); +#63920 = EDGE_LOOP('',(#63921)); +#63921 = ORIENTED_EDGE('',*,*,#63922,.T.); +#63922 = EDGE_CURVE('',#63923,#63923,#63925,.T.); +#63923 = VERTEX_POINT('',#63924); +#63924 = CARTESIAN_POINT('',(176.5,-141.175,1.51)); +#63925 = CIRCLE('',#63926,0.475); +#63926 = AXIS2_PLACEMENT_3D('',#63927,#63928,#63929); +#63927 = CARTESIAN_POINT('',(176.5,-140.7,1.51)); +#63928 = DIRECTION('',(-0.,0.,-1.)); +#63929 = DIRECTION('',(-0.,-1.,0.)); +#63930 = FACE_BOUND('',#63931,.T.); +#63931 = EDGE_LOOP('',(#63932)); +#63932 = ORIENTED_EDGE('',*,*,#63933,.T.); +#63933 = EDGE_CURVE('',#63934,#63934,#63936,.T.); +#63934 = VERTEX_POINT('',#63935); +#63935 = CARTESIAN_POINT('',(176.5,-135.075,1.51)); +#63936 = CIRCLE('',#63937,0.475); +#63937 = AXIS2_PLACEMENT_3D('',#63938,#63939,#63940); +#63938 = CARTESIAN_POINT('',(176.5,-134.6,1.51)); +#63939 = DIRECTION('',(-0.,0.,-1.)); +#63940 = DIRECTION('',(-0.,-1.,0.)); +#63941 = FACE_BOUND('',#63942,.T.); +#63942 = EDGE_LOOP('',(#63943)); +#63943 = ORIENTED_EDGE('',*,*,#63944,.T.); +#63944 = EDGE_CURVE('',#63945,#63945,#63947,.T.); +#63945 = VERTEX_POINT('',#63946); +#63946 = CARTESIAN_POINT('',(176.5,-132.575,1.51)); +#63947 = CIRCLE('',#63948,0.475); +#63948 = AXIS2_PLACEMENT_3D('',#63949,#63950,#63951); +#63949 = CARTESIAN_POINT('',(176.5,-132.1,1.51)); +#63950 = DIRECTION('',(-0.,0.,-1.)); +#63951 = DIRECTION('',(-0.,-1.,0.)); +#63952 = FACE_BOUND('',#63953,.T.); +#63953 = EDGE_LOOP('',(#63954,#63965,#63973,#63982)); +#63954 = ORIENTED_EDGE('',*,*,#63955,.T.); +#63955 = EDGE_CURVE('',#63956,#63958,#63960,.T.); +#63956 = VERTEX_POINT('',#63957); +#63957 = CARTESIAN_POINT('',(104.55,-130.,1.51)); +#63958 = VERTEX_POINT('',#63959); +#63959 = CARTESIAN_POINT('',(104.55,-129.,1.51)); +#63960 = CIRCLE('',#63961,0.5); +#63961 = AXIS2_PLACEMENT_3D('',#63962,#63963,#63964); +#63962 = CARTESIAN_POINT('',(104.55,-129.5,1.51)); +#63963 = DIRECTION('',(-0.,0.,-1.)); +#63964 = DIRECTION('',(0.,1.,0.)); +#63965 = ORIENTED_EDGE('',*,*,#63966,.T.); +#63966 = EDGE_CURVE('',#63958,#63967,#63969,.T.); +#63967 = VERTEX_POINT('',#63968); +#63968 = CARTESIAN_POINT('',(106.05,-129.,1.51)); +#63969 = LINE('',#63970,#63971); +#63970 = CARTESIAN_POINT('',(53.025,-129.,1.51)); +#63971 = VECTOR('',#63972,1.); +#63972 = DIRECTION('',(1.,0.,-0.)); +#63973 = ORIENTED_EDGE('',*,*,#63974,.T.); +#63974 = EDGE_CURVE('',#63967,#63975,#63977,.T.); +#63975 = VERTEX_POINT('',#63976); +#63976 = CARTESIAN_POINT('',(106.05,-130.,1.51)); +#63977 = CIRCLE('',#63978,0.5); +#63978 = AXIS2_PLACEMENT_3D('',#63979,#63980,#63981); +#63979 = CARTESIAN_POINT('',(106.05,-129.5,1.51)); +#63980 = DIRECTION('',(-0.,0.,-1.)); +#63981 = DIRECTION('',(-0.,-1.,0.)); +#63982 = ORIENTED_EDGE('',*,*,#63983,.T.); +#63983 = EDGE_CURVE('',#63975,#63956,#63984,.T.); +#63984 = LINE('',#63985,#63986); +#63985 = CARTESIAN_POINT('',(52.275,-130.,1.51)); +#63986 = VECTOR('',#63987,1.); +#63987 = DIRECTION('',(-1.,0.,0.)); +#63988 = FACE_BOUND('',#63989,.T.); +#63989 = EDGE_LOOP('',(#63990)); +#63990 = ORIENTED_EDGE('',*,*,#63991,.T.); +#63991 = EDGE_CURVE('',#63992,#63992,#63994,.T.); +#63992 = VERTEX_POINT('',#63993); +#63993 = CARTESIAN_POINT('',(103.3,-125.8,1.51)); +#63994 = CIRCLE('',#63995,0.8); +#63995 = AXIS2_PLACEMENT_3D('',#63996,#63997,#63998); +#63996 = CARTESIAN_POINT('',(103.3,-125.,1.51)); +#63997 = DIRECTION('',(-0.,0.,-1.)); +#63998 = DIRECTION('',(-0.,-1.,0.)); +#63999 = FACE_BOUND('',#64000,.T.); +#64000 = EDGE_LOOP('',(#64001,#64012,#64020,#64029)); +#64001 = ORIENTED_EDGE('',*,*,#64002,.T.); +#64002 = EDGE_CURVE('',#64003,#64005,#64007,.T.); +#64003 = VERTEX_POINT('',#64004); +#64004 = CARTESIAN_POINT('',(106.8,-125.65,1.51)); +#64005 = VERTEX_POINT('',#64006); +#64006 = CARTESIAN_POINT('',(105.8,-125.65,1.51)); +#64007 = CIRCLE('',#64008,0.5); +#64008 = AXIS2_PLACEMENT_3D('',#64009,#64010,#64011); +#64009 = CARTESIAN_POINT('',(106.3,-125.65,1.51)); +#64010 = DIRECTION('',(-0.,0.,-1.)); +#64011 = DIRECTION('',(-1.,0.,0.)); +#64012 = ORIENTED_EDGE('',*,*,#64013,.T.); +#64013 = EDGE_CURVE('',#64005,#64014,#64016,.T.); +#64014 = VERTEX_POINT('',#64015); +#64015 = CARTESIAN_POINT('',(105.8,-124.35,1.51)); +#64016 = LINE('',#64017,#64018); +#64017 = CARTESIAN_POINT('',(105.8,-62.175,1.51)); +#64018 = VECTOR('',#64019,1.); +#64019 = DIRECTION('',(-0.,1.,0.)); +#64020 = ORIENTED_EDGE('',*,*,#64021,.T.); +#64021 = EDGE_CURVE('',#64014,#64022,#64024,.T.); +#64022 = VERTEX_POINT('',#64023); +#64023 = CARTESIAN_POINT('',(106.8,-124.35,1.51)); +#64024 = CIRCLE('',#64025,0.5); +#64025 = AXIS2_PLACEMENT_3D('',#64026,#64027,#64028); +#64026 = CARTESIAN_POINT('',(106.3,-124.35,1.51)); +#64027 = DIRECTION('',(0.,-0.,-1.)); +#64028 = DIRECTION('',(1.,0.,-0.)); +#64029 = ORIENTED_EDGE('',*,*,#64030,.T.); +#64030 = EDGE_CURVE('',#64022,#64003,#64031,.T.); +#64031 = LINE('',#64032,#64033); +#64032 = CARTESIAN_POINT('',(106.8,-62.825,1.51)); +#64033 = VECTOR('',#64034,1.); +#64034 = DIRECTION('',(0.,-1.,0.)); +#64035 = FACE_BOUND('',#64036,.T.); +#64036 = EDGE_LOOP('',(#64037,#64048,#64056,#64065)); +#64037 = ORIENTED_EDGE('',*,*,#64038,.T.); +#64038 = EDGE_CURVE('',#64039,#64041,#64043,.T.); +#64039 = VERTEX_POINT('',#64040); +#64040 = CARTESIAN_POINT('',(112.8,-126.,1.51)); +#64041 = VERTEX_POINT('',#64042); +#64042 = CARTESIAN_POINT('',(111.8,-126.,1.51)); +#64043 = CIRCLE('',#64044,0.5); +#64044 = AXIS2_PLACEMENT_3D('',#64045,#64046,#64047); +#64045 = CARTESIAN_POINT('',(112.3,-126.,1.51)); +#64046 = DIRECTION('',(-0.,0.,-1.)); +#64047 = DIRECTION('',(-1.,0.,0.)); +#64048 = ORIENTED_EDGE('',*,*,#64049,.T.); +#64049 = EDGE_CURVE('',#64041,#64050,#64052,.T.); +#64050 = VERTEX_POINT('',#64051); +#64051 = CARTESIAN_POINT('',(111.8,-124.,1.51)); +#64052 = LINE('',#64053,#64054); +#64053 = CARTESIAN_POINT('',(111.8,-62.,1.51)); +#64054 = VECTOR('',#64055,1.); +#64055 = DIRECTION('',(-0.,1.,0.)); +#64056 = ORIENTED_EDGE('',*,*,#64057,.T.); +#64057 = EDGE_CURVE('',#64050,#64058,#64060,.T.); +#64058 = VERTEX_POINT('',#64059); +#64059 = CARTESIAN_POINT('',(112.8,-124.,1.51)); +#64060 = CIRCLE('',#64061,0.5); +#64061 = AXIS2_PLACEMENT_3D('',#64062,#64063,#64064); +#64062 = CARTESIAN_POINT('',(112.3,-124.,1.51)); +#64063 = DIRECTION('',(0.,-0.,-1.)); +#64064 = DIRECTION('',(1.,0.,-0.)); +#64065 = ORIENTED_EDGE('',*,*,#64066,.T.); +#64066 = EDGE_CURVE('',#64058,#64039,#64067,.T.); +#64067 = LINE('',#64068,#64069); +#64068 = CARTESIAN_POINT('',(112.8,-63.,1.51)); +#64069 = VECTOR('',#64070,1.); +#64070 = DIRECTION('',(0.,-1.,0.)); +#64071 = FACE_BOUND('',#64072,.T.); +#64072 = EDGE_LOOP('',(#64073,#64084,#64092,#64101)); +#64073 = ORIENTED_EDGE('',*,*,#64074,.T.); +#64074 = EDGE_CURVE('',#64075,#64077,#64079,.T.); +#64075 = VERTEX_POINT('',#64076); +#64076 = CARTESIAN_POINT('',(104.55,-121.,1.51)); +#64077 = VERTEX_POINT('',#64078); +#64078 = CARTESIAN_POINT('',(104.55,-120.,1.51)); +#64079 = CIRCLE('',#64080,0.5); +#64080 = AXIS2_PLACEMENT_3D('',#64081,#64082,#64083); +#64081 = CARTESIAN_POINT('',(104.55,-120.5,1.51)); +#64082 = DIRECTION('',(-0.,0.,-1.)); +#64083 = DIRECTION('',(0.,1.,0.)); +#64084 = ORIENTED_EDGE('',*,*,#64085,.T.); +#64085 = EDGE_CURVE('',#64077,#64086,#64088,.T.); +#64086 = VERTEX_POINT('',#64087); +#64087 = CARTESIAN_POINT('',(106.05,-120.,1.51)); +#64088 = LINE('',#64089,#64090); +#64089 = CARTESIAN_POINT('',(53.025,-120.,1.51)); +#64090 = VECTOR('',#64091,1.); +#64091 = DIRECTION('',(1.,0.,-0.)); +#64092 = ORIENTED_EDGE('',*,*,#64093,.T.); +#64093 = EDGE_CURVE('',#64086,#64094,#64096,.T.); +#64094 = VERTEX_POINT('',#64095); +#64095 = CARTESIAN_POINT('',(106.05,-121.,1.51)); +#64096 = CIRCLE('',#64097,0.5); +#64097 = AXIS2_PLACEMENT_3D('',#64098,#64099,#64100); +#64098 = CARTESIAN_POINT('',(106.05,-120.5,1.51)); +#64099 = DIRECTION('',(-0.,0.,-1.)); +#64100 = DIRECTION('',(-0.,-1.,0.)); +#64101 = ORIENTED_EDGE('',*,*,#64102,.T.); +#64102 = EDGE_CURVE('',#64094,#64075,#64103,.T.); +#64103 = LINE('',#64104,#64105); +#64104 = CARTESIAN_POINT('',(52.275,-121.,1.51)); +#64105 = VECTOR('',#64106,1.); +#64106 = DIRECTION('',(-1.,0.,0.)); +#64107 = FACE_BOUND('',#64108,.T.); +#64108 = EDGE_LOOP('',(#64109)); +#64109 = ORIENTED_EDGE('',*,*,#64110,.T.); +#64110 = EDGE_CURVE('',#64111,#64111,#64113,.T.); +#64111 = VERTEX_POINT('',#64112); +#64112 = CARTESIAN_POINT('',(104.5,-111.375,1.51)); +#64113 = CIRCLE('',#64114,0.475); +#64114 = AXIS2_PLACEMENT_3D('',#64115,#64116,#64117); +#64115 = CARTESIAN_POINT('',(104.5,-110.9,1.51)); +#64116 = DIRECTION('',(-0.,0.,-1.)); +#64117 = DIRECTION('',(-0.,-1.,0.)); +#64118 = FACE_BOUND('',#64119,.T.); +#64119 = EDGE_LOOP('',(#64120)); +#64120 = ORIENTED_EDGE('',*,*,#64121,.T.); +#64121 = EDGE_CURVE('',#64122,#64122,#64124,.T.); +#64122 = VERTEX_POINT('',#64123); +#64123 = CARTESIAN_POINT('',(120.32,-115.,1.51)); +#64124 = CIRCLE('',#64125,0.4); +#64125 = AXIS2_PLACEMENT_3D('',#64126,#64127,#64128); +#64126 = CARTESIAN_POINT('',(120.32,-114.6,1.51)); +#64127 = DIRECTION('',(-0.,0.,-1.)); +#64128 = DIRECTION('',(-0.,-1.,0.)); +#64129 = FACE_BOUND('',#64130,.T.); +#64130 = EDGE_LOOP('',(#64131)); +#64131 = ORIENTED_EDGE('',*,*,#64132,.T.); +#64132 = EDGE_CURVE('',#64133,#64133,#64135,.T.); +#64133 = VERTEX_POINT('',#64134); +#64134 = CARTESIAN_POINT('',(104.5,-108.875,1.51)); +#64135 = CIRCLE('',#64136,0.475); +#64136 = AXIS2_PLACEMENT_3D('',#64137,#64138,#64139); +#64137 = CARTESIAN_POINT('',(104.5,-108.4,1.51)); +#64138 = DIRECTION('',(-0.,0.,-1.)); +#64139 = DIRECTION('',(-0.,-1.,0.)); +#64140 = FACE_BOUND('',#64141,.T.); +#64141 = EDGE_LOOP('',(#64142)); +#64142 = ORIENTED_EDGE('',*,*,#64143,.T.); +#64143 = EDGE_CURVE('',#64144,#64144,#64146,.T.); +#64144 = VERTEX_POINT('',#64145); +#64145 = CARTESIAN_POINT('',(104.5,-106.375,1.51)); +#64146 = CIRCLE('',#64147,0.475); +#64147 = AXIS2_PLACEMENT_3D('',#64148,#64149,#64150); +#64148 = CARTESIAN_POINT('',(104.5,-105.9,1.51)); +#64149 = DIRECTION('',(-0.,0.,-1.)); +#64150 = DIRECTION('',(-0.,-1.,0.)); +#64151 = FACE_BOUND('',#64152,.T.); +#64152 = EDGE_LOOP('',(#64153)); +#64153 = ORIENTED_EDGE('',*,*,#64154,.T.); +#64154 = EDGE_CURVE('',#64155,#64155,#64157,.T.); +#64155 = VERTEX_POINT('',#64156); +#64156 = CARTESIAN_POINT('',(104.5,-103.875,1.51)); +#64157 = CIRCLE('',#64158,0.475); +#64158 = AXIS2_PLACEMENT_3D('',#64159,#64160,#64161); +#64159 = CARTESIAN_POINT('',(104.5,-103.4,1.51)); +#64160 = DIRECTION('',(-0.,0.,-1.)); +#64161 = DIRECTION('',(-0.,-1.,0.)); +#64162 = FACE_BOUND('',#64163,.T.); +#64163 = EDGE_LOOP('',(#64164)); +#64164 = ORIENTED_EDGE('',*,*,#64165,.T.); +#64165 = EDGE_CURVE('',#64166,#64166,#64168,.T.); +#64166 = VERTEX_POINT('',#64167); +#64167 = CARTESIAN_POINT('',(115.24,-109.14,1.51)); +#64168 = CIRCLE('',#64169,1.6); +#64169 = AXIS2_PLACEMENT_3D('',#64170,#64171,#64172); +#64170 = CARTESIAN_POINT('',(115.24,-107.54,1.51)); +#64171 = DIRECTION('',(-0.,0.,-1.)); +#64172 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#64173 = FACE_BOUND('',#64174,.T.); +#64174 = EDGE_LOOP('',(#64175)); +#64175 = ORIENTED_EDGE('',*,*,#64176,.T.); +#64176 = EDGE_CURVE('',#64177,#64177,#64179,.T.); +#64177 = VERTEX_POINT('',#64178); +#64178 = CARTESIAN_POINT('',(120.32,-102.3,1.51)); +#64179 = CIRCLE('',#64180,0.4); +#64180 = AXIS2_PLACEMENT_3D('',#64181,#64182,#64183); +#64181 = CARTESIAN_POINT('',(120.32,-101.9,1.51)); +#64182 = DIRECTION('',(-0.,0.,-1.)); +#64183 = DIRECTION('',(-0.,-1.,0.)); +#64184 = FACE_BOUND('',#64185,.T.); +#64185 = EDGE_LOOP('',(#64186)); +#64186 = ORIENTED_EDGE('',*,*,#64187,.T.); +#64187 = EDGE_CURVE('',#64188,#64188,#64190,.T.); +#64188 = VERTEX_POINT('',#64189); +#64189 = CARTESIAN_POINT('',(122.86,-115.,1.51)); +#64190 = CIRCLE('',#64191,0.4); +#64191 = AXIS2_PLACEMENT_3D('',#64192,#64193,#64194); +#64192 = CARTESIAN_POINT('',(122.86,-114.6,1.51)); +#64193 = DIRECTION('',(-0.,0.,-1.)); +#64194 = DIRECTION('',(-0.,-1.,0.)); +#64195 = FACE_BOUND('',#64196,.T.); +#64196 = EDGE_LOOP('',(#64197)); +#64197 = ORIENTED_EDGE('',*,*,#64198,.T.); +#64198 = EDGE_CURVE('',#64199,#64199,#64201,.T.); +#64199 = VERTEX_POINT('',#64200); +#64200 = CARTESIAN_POINT('',(125.4,-115.,1.51)); +#64201 = CIRCLE('',#64202,0.4); +#64202 = AXIS2_PLACEMENT_3D('',#64203,#64204,#64205); +#64203 = CARTESIAN_POINT('',(125.4,-114.6,1.51)); +#64204 = DIRECTION('',(-0.,0.,-1.)); +#64205 = DIRECTION('',(-0.,-1.,0.)); +#64206 = FACE_BOUND('',#64207,.T.); +#64207 = EDGE_LOOP('',(#64208)); +#64208 = ORIENTED_EDGE('',*,*,#64209,.T.); +#64209 = EDGE_CURVE('',#64210,#64210,#64212,.T.); +#64210 = VERTEX_POINT('',#64211); +#64211 = CARTESIAN_POINT('',(127.94,-115.,1.51)); +#64212 = CIRCLE('',#64213,0.4); +#64213 = AXIS2_PLACEMENT_3D('',#64214,#64215,#64216); +#64214 = CARTESIAN_POINT('',(127.94,-114.6,1.51)); +#64215 = DIRECTION('',(-0.,0.,-1.)); +#64216 = DIRECTION('',(-0.,-1.,0.)); +#64217 = FACE_BOUND('',#64218,.T.); +#64218 = EDGE_LOOP('',(#64219)); +#64219 = ORIENTED_EDGE('',*,*,#64220,.T.); +#64220 = EDGE_CURVE('',#64221,#64221,#64223,.T.); +#64221 = VERTEX_POINT('',#64222); +#64222 = CARTESIAN_POINT('',(130.48,-115.,1.51)); +#64223 = CIRCLE('',#64224,0.4); +#64224 = AXIS2_PLACEMENT_3D('',#64225,#64226,#64227); +#64225 = CARTESIAN_POINT('',(130.48,-114.6,1.51)); +#64226 = DIRECTION('',(-0.,0.,-1.)); +#64227 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#64228 = FACE_BOUND('',#64229,.T.); +#64229 = EDGE_LOOP('',(#64230)); +#64230 = ORIENTED_EDGE('',*,*,#64231,.T.); +#64231 = EDGE_CURVE('',#64232,#64232,#64234,.T.); +#64232 = VERTEX_POINT('',#64233); +#64233 = CARTESIAN_POINT('',(133.02,-115.,1.51)); +#64234 = CIRCLE('',#64235,0.4); +#64235 = AXIS2_PLACEMENT_3D('',#64236,#64237,#64238); +#64236 = CARTESIAN_POINT('',(133.02,-114.6,1.51)); +#64237 = DIRECTION('',(-0.,0.,-1.)); +#64238 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#64239 = FACE_BOUND('',#64240,.T.); +#64240 = EDGE_LOOP('',(#64241)); +#64241 = ORIENTED_EDGE('',*,*,#64242,.T.); +#64242 = EDGE_CURVE('',#64243,#64243,#64245,.T.); +#64243 = VERTEX_POINT('',#64244); +#64244 = CARTESIAN_POINT('',(135.56,-115.,1.51)); +#64245 = CIRCLE('',#64246,0.4); +#64246 = AXIS2_PLACEMENT_3D('',#64247,#64248,#64249); +#64247 = CARTESIAN_POINT('',(135.56,-114.6,1.51)); +#64248 = DIRECTION('',(-0.,0.,-1.)); +#64249 = DIRECTION('',(-0.,-1.,0.)); +#64250 = FACE_BOUND('',#64251,.T.); +#64251 = EDGE_LOOP('',(#64252)); +#64252 = ORIENTED_EDGE('',*,*,#64253,.T.); +#64253 = EDGE_CURVE('',#64254,#64254,#64256,.T.); +#64254 = VERTEX_POINT('',#64255); +#64255 = CARTESIAN_POINT('',(138.1,-115.,1.51)); +#64256 = CIRCLE('',#64257,0.4); +#64257 = AXIS2_PLACEMENT_3D('',#64258,#64259,#64260); +#64258 = CARTESIAN_POINT('',(138.1,-114.6,1.51)); +#64259 = DIRECTION('',(-0.,0.,-1.)); +#64260 = DIRECTION('',(-0.,-1.,0.)); +#64261 = FACE_BOUND('',#64262,.T.); +#64262 = EDGE_LOOP('',(#64263)); +#64263 = ORIENTED_EDGE('',*,*,#64264,.T.); +#64264 = EDGE_CURVE('',#64265,#64265,#64267,.T.); +#64265 = VERTEX_POINT('',#64266); +#64266 = CARTESIAN_POINT('',(122.86,-102.3,1.51)); +#64267 = CIRCLE('',#64268,0.4); +#64268 = AXIS2_PLACEMENT_3D('',#64269,#64270,#64271); +#64269 = CARTESIAN_POINT('',(122.86,-101.9,1.51)); +#64270 = DIRECTION('',(-0.,0.,-1.)); +#64271 = DIRECTION('',(-0.,-1.,0.)); +#64272 = FACE_BOUND('',#64273,.T.); +#64273 = EDGE_LOOP('',(#64274)); +#64274 = ORIENTED_EDGE('',*,*,#64275,.T.); +#64275 = EDGE_CURVE('',#64276,#64276,#64278,.T.); +#64276 = VERTEX_POINT('',#64277); +#64277 = CARTESIAN_POINT('',(125.4,-102.3,1.51)); +#64278 = CIRCLE('',#64279,0.4); +#64279 = AXIS2_PLACEMENT_3D('',#64280,#64281,#64282); +#64280 = CARTESIAN_POINT('',(125.4,-101.9,1.51)); +#64281 = DIRECTION('',(-0.,0.,-1.)); +#64282 = DIRECTION('',(-0.,-1.,0.)); +#64283 = FACE_BOUND('',#64284,.T.); +#64284 = EDGE_LOOP('',(#64285)); +#64285 = ORIENTED_EDGE('',*,*,#64286,.T.); +#64286 = EDGE_CURVE('',#64287,#64287,#64289,.T.); +#64287 = VERTEX_POINT('',#64288); +#64288 = CARTESIAN_POINT('',(127.94,-102.3,1.51)); +#64289 = CIRCLE('',#64290,0.4); +#64290 = AXIS2_PLACEMENT_3D('',#64291,#64292,#64293); +#64291 = CARTESIAN_POINT('',(127.94,-101.9,1.51)); +#64292 = DIRECTION('',(-0.,0.,-1.)); +#64293 = DIRECTION('',(-0.,-1.,0.)); +#64294 = FACE_BOUND('',#64295,.T.); +#64295 = EDGE_LOOP('',(#64296)); +#64296 = ORIENTED_EDGE('',*,*,#64297,.T.); +#64297 = EDGE_CURVE('',#64298,#64298,#64300,.T.); +#64298 = VERTEX_POINT('',#64299); +#64299 = CARTESIAN_POINT('',(130.48,-102.3,1.51)); +#64300 = CIRCLE('',#64301,0.4); +#64301 = AXIS2_PLACEMENT_3D('',#64302,#64303,#64304); +#64302 = CARTESIAN_POINT('',(130.48,-101.9,1.51)); +#64303 = DIRECTION('',(-0.,0.,-1.)); +#64304 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#64305 = FACE_BOUND('',#64306,.T.); +#64306 = EDGE_LOOP('',(#64307)); +#64307 = ORIENTED_EDGE('',*,*,#64308,.T.); +#64308 = EDGE_CURVE('',#64309,#64309,#64311,.T.); +#64309 = VERTEX_POINT('',#64310); +#64310 = CARTESIAN_POINT('',(133.02,-102.3,1.51)); +#64311 = CIRCLE('',#64312,0.4); +#64312 = AXIS2_PLACEMENT_3D('',#64313,#64314,#64315); +#64313 = CARTESIAN_POINT('',(133.02,-101.9,1.51)); +#64314 = DIRECTION('',(-0.,0.,-1.)); +#64315 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#64316 = FACE_BOUND('',#64317,.T.); +#64317 = EDGE_LOOP('',(#64318)); +#64318 = ORIENTED_EDGE('',*,*,#64319,.T.); +#64319 = EDGE_CURVE('',#64320,#64320,#64322,.T.); +#64320 = VERTEX_POINT('',#64321); +#64321 = CARTESIAN_POINT('',(135.56,-102.3,1.51)); +#64322 = CIRCLE('',#64323,0.4); +#64323 = AXIS2_PLACEMENT_3D('',#64324,#64325,#64326); +#64324 = CARTESIAN_POINT('',(135.56,-101.9,1.51)); +#64325 = DIRECTION('',(-0.,0.,-1.)); +#64326 = DIRECTION('',(-0.,-1.,0.)); +#64327 = FACE_BOUND('',#64328,.T.); +#64328 = EDGE_LOOP('',(#64329)); +#64329 = ORIENTED_EDGE('',*,*,#64330,.T.); +#64330 = EDGE_CURVE('',#64331,#64331,#64333,.T.); +#64331 = VERTEX_POINT('',#64332); +#64332 = CARTESIAN_POINT('',(138.1,-102.3,1.51)); +#64333 = CIRCLE('',#64334,0.4); +#64334 = AXIS2_PLACEMENT_3D('',#64335,#64336,#64337); +#64335 = CARTESIAN_POINT('',(138.1,-101.9,1.51)); +#64336 = DIRECTION('',(-0.,0.,-1.)); +#64337 = DIRECTION('',(-0.,-1.,0.)); +#64338 = FACE_BOUND('',#64339,.T.); +#64339 = EDGE_LOOP('',(#64340)); +#64340 = ORIENTED_EDGE('',*,*,#64341,.T.); +#64341 = EDGE_CURVE('',#64342,#64342,#64344,.T.); +#64342 = VERTEX_POINT('',#64343); +#64343 = CARTESIAN_POINT('',(176.5,-130.075,1.51)); +#64344 = CIRCLE('',#64345,0.475); +#64345 = AXIS2_PLACEMENT_3D('',#64346,#64347,#64348); +#64346 = CARTESIAN_POINT('',(176.5,-129.6,1.51)); +#64347 = DIRECTION('',(-0.,0.,-1.)); +#64348 = DIRECTION('',(-0.,-1.,0.)); +#64349 = FACE_BOUND('',#64350,.T.); +#64350 = EDGE_LOOP('',(#64351)); +#64351 = ORIENTED_EDGE('',*,*,#64352,.T.); +#64352 = EDGE_CURVE('',#64353,#64353,#64355,.T.); +#64353 = VERTEX_POINT('',#64354); +#64354 = CARTESIAN_POINT('',(176.5,-123.975,1.51)); +#64355 = CIRCLE('',#64356,0.475); +#64356 = AXIS2_PLACEMENT_3D('',#64357,#64358,#64359); +#64357 = CARTESIAN_POINT('',(176.5,-123.5,1.51)); +#64358 = DIRECTION('',(-0.,0.,-1.)); +#64359 = DIRECTION('',(-0.,-1.,0.)); +#64360 = FACE_BOUND('',#64361,.T.); +#64361 = EDGE_LOOP('',(#64362)); +#64362 = ORIENTED_EDGE('',*,*,#64363,.T.); +#64363 = EDGE_CURVE('',#64364,#64364,#64366,.T.); +#64364 = VERTEX_POINT('',#64365); +#64365 = CARTESIAN_POINT('',(166.04,-124.38,1.51)); +#64366 = CIRCLE('',#64367,1.6); +#64367 = AXIS2_PLACEMENT_3D('',#64368,#64369,#64370); +#64368 = CARTESIAN_POINT('',(166.04,-122.78,1.51)); +#64369 = DIRECTION('',(-0.,0.,-1.)); +#64370 = DIRECTION('',(-0.,-1.,0.)); +#64371 = FACE_BOUND('',#64372,.T.); +#64372 = EDGE_LOOP('',(#64373)); +#64373 = ORIENTED_EDGE('',*,*,#64374,.T.); +#64374 = EDGE_CURVE('',#64375,#64375,#64377,.T.); +#64375 = VERTEX_POINT('',#64376); +#64376 = CARTESIAN_POINT('',(176.5,-121.475,1.51)); +#64377 = CIRCLE('',#64378,0.475); +#64378 = AXIS2_PLACEMENT_3D('',#64379,#64380,#64381); +#64379 = CARTESIAN_POINT('',(176.5,-121.,1.51)); +#64380 = DIRECTION('',(-0.,0.,-1.)); +#64381 = DIRECTION('',(-0.,-1.,0.)); +#64382 = FACE_BOUND('',#64383,.T.); +#64383 = EDGE_LOOP('',(#64384)); +#64384 = ORIENTED_EDGE('',*,*,#64385,.T.); +#64385 = EDGE_CURVE('',#64386,#64386,#64388,.T.); +#64386 = VERTEX_POINT('',#64387); +#64387 = CARTESIAN_POINT('',(176.5,-118.975,1.51)); +#64388 = CIRCLE('',#64389,0.475); +#64389 = AXIS2_PLACEMENT_3D('',#64390,#64391,#64392); +#64390 = CARTESIAN_POINT('',(176.5,-118.5,1.51)); +#64391 = DIRECTION('',(-0.,0.,-1.)); +#64392 = DIRECTION('',(-0.,-1.,0.)); +#64393 = FACE_BOUND('',#64394,.T.); +#64394 = EDGE_LOOP('',(#64395)); +#64395 = ORIENTED_EDGE('',*,*,#64396,.T.); +#64396 = EDGE_CURVE('',#64397,#64397,#64399,.T.); +#64397 = VERTEX_POINT('',#64398); +#64398 = CARTESIAN_POINT('',(141.32,-115.,1.51)); +#64399 = CIRCLE('',#64400,0.4); +#64400 = AXIS2_PLACEMENT_3D('',#64401,#64402,#64403); +#64401 = CARTESIAN_POINT('',(141.32,-114.6,1.51)); +#64402 = DIRECTION('',(-0.,0.,-1.)); +#64403 = DIRECTION('',(-0.,-1.,0.)); +#64404 = FACE_BOUND('',#64405,.T.); +#64405 = EDGE_LOOP('',(#64406)); +#64406 = ORIENTED_EDGE('',*,*,#64407,.T.); +#64407 = EDGE_CURVE('',#64408,#64408,#64410,.T.); +#64408 = VERTEX_POINT('',#64409); +#64409 = CARTESIAN_POINT('',(143.86,-115.,1.51)); +#64410 = CIRCLE('',#64411,0.4); +#64411 = AXIS2_PLACEMENT_3D('',#64412,#64413,#64414); +#64412 = CARTESIAN_POINT('',(143.86,-114.6,1.51)); +#64413 = DIRECTION('',(-0.,0.,-1.)); +#64414 = DIRECTION('',(-0.,-1.,0.)); +#64415 = FACE_BOUND('',#64416,.T.); +#64416 = EDGE_LOOP('',(#64417)); +#64417 = ORIENTED_EDGE('',*,*,#64418,.T.); +#64418 = EDGE_CURVE('',#64419,#64419,#64421,.T.); +#64419 = VERTEX_POINT('',#64420); +#64420 = CARTESIAN_POINT('',(146.4,-115.,1.51)); +#64421 = CIRCLE('',#64422,0.4); +#64422 = AXIS2_PLACEMENT_3D('',#64423,#64424,#64425); +#64423 = CARTESIAN_POINT('',(146.4,-114.6,1.51)); +#64424 = DIRECTION('',(-0.,0.,-1.)); +#64425 = DIRECTION('',(-0.,-1.,0.)); +#64426 = FACE_BOUND('',#64427,.T.); +#64427 = EDGE_LOOP('',(#64428)); +#64428 = ORIENTED_EDGE('',*,*,#64429,.T.); +#64429 = EDGE_CURVE('',#64430,#64430,#64432,.T.); +#64430 = VERTEX_POINT('',#64431); +#64431 = CARTESIAN_POINT('',(148.94,-115.,1.51)); +#64432 = CIRCLE('',#64433,0.4); +#64433 = AXIS2_PLACEMENT_3D('',#64434,#64435,#64436); +#64434 = CARTESIAN_POINT('',(148.94,-114.6,1.51)); +#64435 = DIRECTION('',(-0.,0.,-1.)); +#64436 = DIRECTION('',(-0.,-1.,0.)); +#64437 = FACE_BOUND('',#64438,.T.); +#64438 = EDGE_LOOP('',(#64439)); +#64439 = ORIENTED_EDGE('',*,*,#64440,.T.); +#64440 = EDGE_CURVE('',#64441,#64441,#64443,.T.); +#64441 = VERTEX_POINT('',#64442); +#64442 = CARTESIAN_POINT('',(151.48,-115.,1.51)); +#64443 = CIRCLE('',#64444,0.4); +#64444 = AXIS2_PLACEMENT_3D('',#64445,#64446,#64447); +#64445 = CARTESIAN_POINT('',(151.48,-114.6,1.51)); +#64446 = DIRECTION('',(-0.,0.,-1.)); +#64447 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#64448 = FACE_BOUND('',#64449,.T.); +#64449 = EDGE_LOOP('',(#64450)); +#64450 = ORIENTED_EDGE('',*,*,#64451,.T.); +#64451 = EDGE_CURVE('',#64452,#64452,#64454,.T.); +#64452 = VERTEX_POINT('',#64453); +#64453 = CARTESIAN_POINT('',(154.02,-115.,1.51)); +#64454 = CIRCLE('',#64455,0.4); +#64455 = AXIS2_PLACEMENT_3D('',#64456,#64457,#64458); +#64456 = CARTESIAN_POINT('',(154.02,-114.6,1.51)); +#64457 = DIRECTION('',(-0.,0.,-1.)); +#64458 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#64459 = FACE_BOUND('',#64460,.T.); +#64460 = EDGE_LOOP('',(#64461)); +#64461 = ORIENTED_EDGE('',*,*,#64462,.T.); +#64462 = EDGE_CURVE('',#64463,#64463,#64465,.T.); +#64463 = VERTEX_POINT('',#64464); +#64464 = CARTESIAN_POINT('',(156.56,-115.,1.51)); +#64465 = CIRCLE('',#64466,0.4); +#64466 = AXIS2_PLACEMENT_3D('',#64467,#64468,#64469); +#64467 = CARTESIAN_POINT('',(156.56,-114.6,1.51)); +#64468 = DIRECTION('',(-0.,0.,-1.)); +#64469 = DIRECTION('',(-0.,-1.,0.)); +#64470 = FACE_BOUND('',#64471,.T.); +#64471 = EDGE_LOOP('',(#64472)); +#64472 = ORIENTED_EDGE('',*,*,#64473,.T.); +#64473 = EDGE_CURVE('',#64474,#64474,#64476,.T.); +#64474 = VERTEX_POINT('',#64475); +#64475 = CARTESIAN_POINT('',(141.32,-102.3,1.51)); +#64476 = CIRCLE('',#64477,0.4); +#64477 = AXIS2_PLACEMENT_3D('',#64478,#64479,#64480); +#64478 = CARTESIAN_POINT('',(141.32,-101.9,1.51)); +#64479 = DIRECTION('',(-0.,0.,-1.)); +#64480 = DIRECTION('',(-0.,-1.,0.)); +#64481 = FACE_BOUND('',#64482,.T.); +#64482 = EDGE_LOOP('',(#64483)); +#64483 = ORIENTED_EDGE('',*,*,#64484,.T.); +#64484 = EDGE_CURVE('',#64485,#64485,#64487,.T.); +#64485 = VERTEX_POINT('',#64486); +#64486 = CARTESIAN_POINT('',(143.86,-102.3,1.51)); +#64487 = CIRCLE('',#64488,0.4); +#64488 = AXIS2_PLACEMENT_3D('',#64489,#64490,#64491); +#64489 = CARTESIAN_POINT('',(143.86,-101.9,1.51)); +#64490 = DIRECTION('',(-0.,0.,-1.)); +#64491 = DIRECTION('',(-0.,-1.,0.)); +#64492 = FACE_BOUND('',#64493,.T.); +#64493 = EDGE_LOOP('',(#64494)); +#64494 = ORIENTED_EDGE('',*,*,#64495,.T.); +#64495 = EDGE_CURVE('',#64496,#64496,#64498,.T.); +#64496 = VERTEX_POINT('',#64497); +#64497 = CARTESIAN_POINT('',(146.4,-102.3,1.51)); +#64498 = CIRCLE('',#64499,0.4); +#64499 = AXIS2_PLACEMENT_3D('',#64500,#64501,#64502); +#64500 = CARTESIAN_POINT('',(146.4,-101.9,1.51)); +#64501 = DIRECTION('',(-0.,0.,-1.)); +#64502 = DIRECTION('',(-0.,-1.,0.)); +#64503 = FACE_BOUND('',#64504,.T.); +#64504 = EDGE_LOOP('',(#64505)); +#64505 = ORIENTED_EDGE('',*,*,#64506,.T.); +#64506 = EDGE_CURVE('',#64507,#64507,#64509,.T.); +#64507 = VERTEX_POINT('',#64508); +#64508 = CARTESIAN_POINT('',(148.94,-102.3,1.51)); +#64509 = CIRCLE('',#64510,0.4); +#64510 = AXIS2_PLACEMENT_3D('',#64511,#64512,#64513); +#64511 = CARTESIAN_POINT('',(148.94,-101.9,1.51)); +#64512 = DIRECTION('',(-0.,0.,-1.)); +#64513 = DIRECTION('',(-0.,-1.,0.)); +#64514 = FACE_BOUND('',#64515,.T.); +#64515 = EDGE_LOOP('',(#64516)); +#64516 = ORIENTED_EDGE('',*,*,#64517,.T.); +#64517 = EDGE_CURVE('',#64518,#64518,#64520,.T.); +#64518 = VERTEX_POINT('',#64519); +#64519 = CARTESIAN_POINT('',(151.48,-102.3,1.51)); +#64520 = CIRCLE('',#64521,0.4); +#64521 = AXIS2_PLACEMENT_3D('',#64522,#64523,#64524); +#64522 = CARTESIAN_POINT('',(151.48,-101.9,1.51)); +#64523 = DIRECTION('',(-0.,0.,-1.)); +#64524 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#64525 = FACE_BOUND('',#64526,.T.); +#64526 = EDGE_LOOP('',(#64527)); +#64527 = ORIENTED_EDGE('',*,*,#64528,.T.); +#64528 = EDGE_CURVE('',#64529,#64529,#64531,.T.); +#64529 = VERTEX_POINT('',#64530); +#64530 = CARTESIAN_POINT('',(154.02,-102.3,1.51)); +#64531 = CIRCLE('',#64532,0.4); +#64532 = AXIS2_PLACEMENT_3D('',#64533,#64534,#64535); +#64533 = CARTESIAN_POINT('',(154.02,-101.9,1.51)); +#64534 = DIRECTION('',(-0.,0.,-1.)); +#64535 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#64536 = FACE_BOUND('',#64537,.T.); +#64537 = EDGE_LOOP('',(#64538)); +#64538 = ORIENTED_EDGE('',*,*,#64539,.T.); +#64539 = EDGE_CURVE('',#64540,#64540,#64542,.T.); +#64540 = VERTEX_POINT('',#64541); +#64541 = CARTESIAN_POINT('',(156.56,-102.3,1.51)); +#64542 = CIRCLE('',#64543,0.4); +#64543 = AXIS2_PLACEMENT_3D('',#64544,#64545,#64546); +#64544 = CARTESIAN_POINT('',(156.56,-101.9,1.51)); +#64545 = DIRECTION('',(-0.,0.,-1.)); +#64546 = DIRECTION('',(-0.,-1.,0.)); +#64547 = FACE_BOUND('',#64548,.T.); +#64548 = EDGE_LOOP('',(#64549)); +#64549 = ORIENTED_EDGE('',*,*,#64550,.T.); +#64550 = EDGE_CURVE('',#64551,#64551,#64553,.T.); +#64551 = VERTEX_POINT('',#64552); +#64552 = CARTESIAN_POINT('',(159.1,-115.,1.51)); +#64553 = CIRCLE('',#64554,0.4); +#64554 = AXIS2_PLACEMENT_3D('',#64555,#64556,#64557); +#64555 = CARTESIAN_POINT('',(159.1,-114.6,1.51)); +#64556 = DIRECTION('',(-0.,0.,-1.)); +#64557 = DIRECTION('',(-0.,-1.,0.)); +#64558 = FACE_BOUND('',#64559,.T.); +#64559 = EDGE_LOOP('',(#64560)); +#64560 = ORIENTED_EDGE('',*,*,#64561,.T.); +#64561 = EDGE_CURVE('',#64562,#64562,#64564,.T.); +#64562 = VERTEX_POINT('',#64563); +#64563 = CARTESIAN_POINT('',(176.5,-111.375,1.51)); +#64564 = CIRCLE('',#64565,0.475); +#64565 = AXIS2_PLACEMENT_3D('',#64566,#64567,#64568); +#64566 = CARTESIAN_POINT('',(176.5,-110.9,1.51)); +#64567 = DIRECTION('',(-0.,0.,-1.)); +#64568 = DIRECTION('',(-0.,-1.,0.)); +#64569 = FACE_BOUND('',#64570,.T.); +#64570 = EDGE_LOOP('',(#64571)); +#64571 = ORIENTED_EDGE('',*,*,#64572,.T.); +#64572 = EDGE_CURVE('',#64573,#64573,#64575,.T.); +#64573 = VERTEX_POINT('',#64574); +#64574 = CARTESIAN_POINT('',(159.1,-102.3,1.51)); +#64575 = CIRCLE('',#64576,0.4); +#64576 = AXIS2_PLACEMENT_3D('',#64577,#64578,#64579); +#64577 = CARTESIAN_POINT('',(159.1,-101.9,1.51)); +#64578 = DIRECTION('',(-0.,0.,-1.)); +#64579 = DIRECTION('',(-0.,-1.,0.)); +#64580 = FACE_BOUND('',#64581,.T.); +#64581 = EDGE_LOOP('',(#64582)); +#64582 = ORIENTED_EDGE('',*,*,#64583,.T.); +#64583 = EDGE_CURVE('',#64584,#64584,#64586,.T.); +#64584 = VERTEX_POINT('',#64585); +#64585 = CARTESIAN_POINT('',(176.5,-108.875,1.51)); +#64586 = CIRCLE('',#64587,0.475); +#64587 = AXIS2_PLACEMENT_3D('',#64588,#64589,#64590); +#64588 = CARTESIAN_POINT('',(176.5,-108.4,1.51)); +#64589 = DIRECTION('',(-0.,0.,-1.)); +#64590 = DIRECTION('',(-0.,-1.,0.)); +#64591 = FACE_BOUND('',#64592,.T.); +#64592 = EDGE_LOOP('',(#64593)); +#64593 = ORIENTED_EDGE('',*,*,#64594,.T.); +#64594 = EDGE_CURVE('',#64595,#64595,#64597,.T.); +#64595 = VERTEX_POINT('',#64596); +#64596 = CARTESIAN_POINT('',(176.5,-106.375,1.51)); +#64597 = CIRCLE('',#64598,0.475); +#64598 = AXIS2_PLACEMENT_3D('',#64599,#64600,#64601); +#64599 = CARTESIAN_POINT('',(176.5,-105.9,1.51)); +#64600 = DIRECTION('',(-0.,0.,-1.)); +#64601 = DIRECTION('',(-0.,-1.,0.)); +#64602 = FACE_BOUND('',#64603,.T.); +#64603 = EDGE_LOOP('',(#64604)); +#64604 = ORIENTED_EDGE('',*,*,#64605,.T.); +#64605 = EDGE_CURVE('',#64606,#64606,#64608,.T.); +#64606 = VERTEX_POINT('',#64607); +#64607 = CARTESIAN_POINT('',(176.5,-103.875,1.51)); +#64608 = CIRCLE('',#64609,0.475); +#64609 = AXIS2_PLACEMENT_3D('',#64610,#64611,#64612); +#64610 = CARTESIAN_POINT('',(176.5,-103.4,1.51)); +#64611 = DIRECTION('',(-0.,0.,-1.)); +#64612 = DIRECTION('',(-0.,-1.,0.)); +#64613 = PLANE('',#64614); +#64614 = AXIS2_PLACEMENT_3D('',#64615,#64616,#64617); +#64615 = CARTESIAN_POINT('',(0.,0.,1.51)); +#64616 = DIRECTION('',(0.,0.,1.)); +#64617 = DIRECTION('',(1.,0.,-0.)); +#64618 = ADVANCED_FACE('',(#64619),#64625,.T.); +#64619 = FACE_BOUND('',#64620,.T.); +#64620 = EDGE_LOOP('',(#64621,#64622,#64623,#64624)); +#64621 = ORIENTED_EDGE('',*,*,#62604,.T.); +#64622 = ORIENTED_EDGE('',*,*,#63626,.T.); +#64623 = ORIENTED_EDGE('',*,*,#62564,.F.); +#64624 = ORIENTED_EDGE('',*,*,#62628,.F.); +#64625 = PLANE('',#64626); +#64626 = AXIS2_PLACEMENT_3D('',#64627,#64628,#64629); +#64627 = CARTESIAN_POINT('',(100.,-100.,0.)); +#64628 = DIRECTION('',(0.,1.,0.)); +#64629 = DIRECTION('',(1.,0.,0.)); +#64630 = ADVANCED_FACE('',(#64631),#64642,.F.); +#64631 = FACE_BOUND('',#64632,.T.); +#64632 = EDGE_LOOP('',(#64633,#64634,#64640,#64641)); +#64633 = ORIENTED_EDGE('',*,*,#62637,.T.); +#64634 = ORIENTED_EDGE('',*,*,#64635,.T.); +#64635 = EDGE_CURVE('',#62638,#63636,#64636,.T.); +#64636 = LINE('',#64637,#64638); +#64637 = CARTESIAN_POINT('',(113.97,-157.4,-4.6E-02)); +#64638 = VECTOR('',#64639,1.); +#64639 = DIRECTION('',(0.,0.,1.)); +#64640 = ORIENTED_EDGE('',*,*,#63635,.F.); +#64641 = ORIENTED_EDGE('',*,*,#64635,.F.); +#64642 = CYLINDRICAL_SURFACE('',#64643,1.6); +#64643 = AXIS2_PLACEMENT_3D('',#64644,#64645,#64646); +#64644 = CARTESIAN_POINT('',(113.97,-155.8,-4.6E-02)); +#64645 = DIRECTION('',(-0.,-0.,-1.)); +#64646 = DIRECTION('',(-0.,-1.,0.)); +#64647 = ADVANCED_FACE('',(#64648),#64664,.F.); +#64648 = FACE_BOUND('',#64649,.T.); +#64649 = EDGE_LOOP('',(#64650,#64651,#64657,#64658)); +#64650 = ORIENTED_EDGE('',*,*,#62648,.T.); +#64651 = ORIENTED_EDGE('',*,*,#64652,.T.); +#64652 = EDGE_CURVE('',#62651,#63649,#64653,.T.); +#64653 = LINE('',#64654,#64655); +#64654 = CARTESIAN_POINT('',(102.05,-148.02,-4.6E-02)); +#64655 = VECTOR('',#64656,1.); +#64656 = DIRECTION('',(0.,0.,1.)); +#64657 = ORIENTED_EDGE('',*,*,#63646,.F.); +#64658 = ORIENTED_EDGE('',*,*,#64659,.F.); +#64659 = EDGE_CURVE('',#62649,#63647,#64660,.T.); +#64660 = LINE('',#64661,#64662); +#64661 = CARTESIAN_POINT('',(102.05,-148.62,-4.6E-02)); +#64662 = VECTOR('',#64663,1.); +#64663 = DIRECTION('',(0.,0.,1.)); +#64664 = CYLINDRICAL_SURFACE('',#64665,0.3); +#64665 = AXIS2_PLACEMENT_3D('',#64666,#64667,#64668); +#64666 = CARTESIAN_POINT('',(102.05,-148.32,-4.6E-02)); +#64667 = DIRECTION('',(-0.,0.,-1.)); +#64668 = DIRECTION('',(0.,1.,0.)); +#64669 = ADVANCED_FACE('',(#64670),#64681,.T.); +#64670 = FACE_BOUND('',#64671,.T.); +#64671 = EDGE_LOOP('',(#64672,#64673,#64674,#64675)); +#64672 = ORIENTED_EDGE('',*,*,#62676,.T.); +#64673 = ORIENTED_EDGE('',*,*,#64659,.T.); +#64674 = ORIENTED_EDGE('',*,*,#63674,.F.); +#64675 = ORIENTED_EDGE('',*,*,#64676,.F.); +#64676 = EDGE_CURVE('',#62668,#63666,#64677,.T.); +#64677 = LINE('',#64678,#64679); +#64678 = CARTESIAN_POINT('',(102.65,-148.62,-4.6E-02)); +#64679 = VECTOR('',#64680,1.); +#64680 = DIRECTION('',(0.,0.,1.)); +#64681 = PLANE('',#64682); +#64682 = AXIS2_PLACEMENT_3D('',#64683,#64684,#64685); +#64683 = CARTESIAN_POINT('',(102.05,-148.62,-4.6E-02)); +#64684 = DIRECTION('',(0.,1.,0.)); +#64685 = DIRECTION('',(1.,0.,0.)); +#64686 = ADVANCED_FACE('',(#64687),#64698,.F.); +#64687 = FACE_BOUND('',#64688,.T.); +#64688 = EDGE_LOOP('',(#64689,#64690,#64691,#64692)); +#64689 = ORIENTED_EDGE('',*,*,#62667,.T.); +#64690 = ORIENTED_EDGE('',*,*,#64676,.T.); +#64691 = ORIENTED_EDGE('',*,*,#63665,.F.); +#64692 = ORIENTED_EDGE('',*,*,#64693,.F.); +#64693 = EDGE_CURVE('',#62660,#63658,#64694,.T.); +#64694 = LINE('',#64695,#64696); +#64695 = CARTESIAN_POINT('',(102.65,-148.02,-4.6E-02)); +#64696 = VECTOR('',#64697,1.); +#64697 = DIRECTION('',(0.,0.,1.)); +#64698 = CYLINDRICAL_SURFACE('',#64699,0.3); +#64699 = AXIS2_PLACEMENT_3D('',#64700,#64701,#64702); +#64700 = CARTESIAN_POINT('',(102.65,-148.32,-4.6E-02)); +#64701 = DIRECTION('',(-0.,-0.,-1.)); +#64702 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#64703 = ADVANCED_FACE('',(#64704),#64710,.T.); +#64704 = FACE_BOUND('',#64705,.T.); +#64705 = EDGE_LOOP('',(#64706,#64707,#64708,#64709)); +#64706 = ORIENTED_EDGE('',*,*,#62659,.T.); +#64707 = ORIENTED_EDGE('',*,*,#64693,.T.); +#64708 = ORIENTED_EDGE('',*,*,#63657,.F.); +#64709 = ORIENTED_EDGE('',*,*,#64652,.F.); +#64710 = PLANE('',#64711); +#64711 = AXIS2_PLACEMENT_3D('',#64712,#64713,#64714); +#64712 = CARTESIAN_POINT('',(102.65,-148.02,-4.6E-02)); +#64713 = DIRECTION('',(0.,-1.,0.)); +#64714 = DIRECTION('',(-1.,0.,0.)); +#64715 = ADVANCED_FACE('',(#64716),#64727,.F.); +#64716 = FACE_BOUND('',#64717,.T.); +#64717 = EDGE_LOOP('',(#64718,#64719,#64725,#64726)); +#64718 = ORIENTED_EDGE('',*,*,#62684,.T.); +#64719 = ORIENTED_EDGE('',*,*,#64720,.T.); +#64720 = EDGE_CURVE('',#62685,#63683,#64721,.T.); +#64721 = LINE('',#64722,#64723); +#64722 = CARTESIAN_POINT('',(106.,-147.215,-4.6E-02)); +#64723 = VECTOR('',#64724,1.); +#64724 = DIRECTION('',(0.,0.,1.)); +#64725 = ORIENTED_EDGE('',*,*,#63682,.F.); +#64726 = ORIENTED_EDGE('',*,*,#64720,.F.); +#64727 = CYLINDRICAL_SURFACE('',#64728,0.325); +#64728 = AXIS2_PLACEMENT_3D('',#64729,#64730,#64731); +#64729 = CARTESIAN_POINT('',(106.,-146.89,-4.6E-02)); +#64730 = DIRECTION('',(-0.,-0.,-1.)); +#64731 = DIRECTION('',(-0.,-1.,0.)); +#64732 = ADVANCED_FACE('',(#64733),#64749,.F.); +#64733 = FACE_BOUND('',#64734,.T.); +#64734 = EDGE_LOOP('',(#64735,#64736,#64742,#64743)); +#64735 = ORIENTED_EDGE('',*,*,#62695,.T.); +#64736 = ORIENTED_EDGE('',*,*,#64737,.T.); +#64737 = EDGE_CURVE('',#62698,#63696,#64738,.T.); +#64738 = LINE('',#64739,#64740); +#64739 = CARTESIAN_POINT('',(105.98,-148.02,-4.6E-02)); +#64740 = VECTOR('',#64741,1.); +#64741 = DIRECTION('',(0.,0.,1.)); +#64742 = ORIENTED_EDGE('',*,*,#63693,.F.); +#64743 = ORIENTED_EDGE('',*,*,#64744,.F.); +#64744 = EDGE_CURVE('',#62696,#63694,#64745,.T.); +#64745 = LINE('',#64746,#64747); +#64746 = CARTESIAN_POINT('',(105.98,-148.62,-4.6E-02)); +#64747 = VECTOR('',#64748,1.); +#64748 = DIRECTION('',(0.,0.,1.)); +#64749 = CYLINDRICAL_SURFACE('',#64750,0.3); +#64750 = AXIS2_PLACEMENT_3D('',#64751,#64752,#64753); +#64751 = CARTESIAN_POINT('',(105.98,-148.32,-4.6E-02)); +#64752 = DIRECTION('',(-0.,0.,-1.)); +#64753 = DIRECTION('',(0.,1.,0.)); +#64754 = ADVANCED_FACE('',(#64755),#64766,.T.); +#64755 = FACE_BOUND('',#64756,.T.); +#64756 = EDGE_LOOP('',(#64757,#64758,#64759,#64760)); +#64757 = ORIENTED_EDGE('',*,*,#62723,.T.); +#64758 = ORIENTED_EDGE('',*,*,#64744,.T.); +#64759 = ORIENTED_EDGE('',*,*,#63721,.F.); +#64760 = ORIENTED_EDGE('',*,*,#64761,.F.); +#64761 = EDGE_CURVE('',#62715,#63713,#64762,.T.); +#64762 = LINE('',#64763,#64764); +#64763 = CARTESIAN_POINT('',(107.08,-148.62,-4.6E-02)); +#64764 = VECTOR('',#64765,1.); +#64765 = DIRECTION('',(0.,0.,1.)); +#64766 = PLANE('',#64767); +#64767 = AXIS2_PLACEMENT_3D('',#64768,#64769,#64770); +#64768 = CARTESIAN_POINT('',(105.98,-148.62,-4.6E-02)); +#64769 = DIRECTION('',(0.,1.,0.)); +#64770 = DIRECTION('',(1.,0.,0.)); +#64771 = ADVANCED_FACE('',(#64772),#64783,.F.); +#64772 = FACE_BOUND('',#64773,.T.); +#64773 = EDGE_LOOP('',(#64774,#64775,#64776,#64777)); +#64774 = ORIENTED_EDGE('',*,*,#62714,.T.); +#64775 = ORIENTED_EDGE('',*,*,#64761,.T.); +#64776 = ORIENTED_EDGE('',*,*,#63712,.F.); +#64777 = ORIENTED_EDGE('',*,*,#64778,.F.); +#64778 = EDGE_CURVE('',#62707,#63705,#64779,.T.); +#64779 = LINE('',#64780,#64781); +#64780 = CARTESIAN_POINT('',(107.08,-148.02,-4.6E-02)); +#64781 = VECTOR('',#64782,1.); +#64782 = DIRECTION('',(0.,0.,1.)); +#64783 = CYLINDRICAL_SURFACE('',#64784,0.3); +#64784 = AXIS2_PLACEMENT_3D('',#64785,#64786,#64787); +#64785 = CARTESIAN_POINT('',(107.08,-148.32,-4.6E-02)); +#64786 = DIRECTION('',(-0.,-0.,-1.)); +#64787 = DIRECTION('',(-0.,-1.,0.)); +#64788 = ADVANCED_FACE('',(#64789),#64795,.T.); +#64789 = FACE_BOUND('',#64790,.T.); +#64790 = EDGE_LOOP('',(#64791,#64792,#64793,#64794)); +#64791 = ORIENTED_EDGE('',*,*,#62706,.T.); +#64792 = ORIENTED_EDGE('',*,*,#64778,.T.); +#64793 = ORIENTED_EDGE('',*,*,#63704,.F.); +#64794 = ORIENTED_EDGE('',*,*,#64737,.F.); +#64795 = PLANE('',#64796); +#64796 = AXIS2_PLACEMENT_3D('',#64797,#64798,#64799); +#64797 = CARTESIAN_POINT('',(107.08,-148.02,-4.6E-02)); +#64798 = DIRECTION('',(0.,-1.,0.)); +#64799 = DIRECTION('',(-1.,0.,0.)); +#64800 = ADVANCED_FACE('',(#64801),#64812,.F.); +#64801 = FACE_BOUND('',#64802,.T.); +#64802 = EDGE_LOOP('',(#64803,#64804,#64810,#64811)); +#64803 = ORIENTED_EDGE('',*,*,#62731,.T.); +#64804 = ORIENTED_EDGE('',*,*,#64805,.T.); +#64805 = EDGE_CURVE('',#62732,#63730,#64806,.T.); +#64806 = LINE('',#64807,#64808); +#64807 = CARTESIAN_POINT('',(106.,-141.435,-4.6E-02)); +#64808 = VECTOR('',#64809,1.); +#64809 = DIRECTION('',(0.,0.,1.)); +#64810 = ORIENTED_EDGE('',*,*,#63729,.F.); +#64811 = ORIENTED_EDGE('',*,*,#64805,.F.); +#64812 = CYLINDRICAL_SURFACE('',#64813,0.325); +#64813 = AXIS2_PLACEMENT_3D('',#64814,#64815,#64816); +#64814 = CARTESIAN_POINT('',(106.,-141.11,-4.6E-02)); +#64815 = DIRECTION('',(-0.,-0.,-1.)); +#64816 = DIRECTION('',(-0.,-1.,0.)); +#64817 = ADVANCED_FACE('',(#64818),#64834,.F.); +#64818 = FACE_BOUND('',#64819,.T.); +#64819 = EDGE_LOOP('',(#64820,#64821,#64827,#64828)); +#64820 = ORIENTED_EDGE('',*,*,#62742,.T.); +#64821 = ORIENTED_EDGE('',*,*,#64822,.T.); +#64822 = EDGE_CURVE('',#62745,#63743,#64823,.T.); +#64823 = LINE('',#64824,#64825); +#64824 = CARTESIAN_POINT('',(102.05,-139.38,-4.6E-02)); +#64825 = VECTOR('',#64826,1.); +#64826 = DIRECTION('',(0.,0.,1.)); +#64827 = ORIENTED_EDGE('',*,*,#63740,.F.); +#64828 = ORIENTED_EDGE('',*,*,#64829,.F.); +#64829 = EDGE_CURVE('',#62743,#63741,#64830,.T.); +#64830 = LINE('',#64831,#64832); +#64831 = CARTESIAN_POINT('',(102.05,-139.98,-4.6E-02)); +#64832 = VECTOR('',#64833,1.); +#64833 = DIRECTION('',(0.,0.,1.)); +#64834 = CYLINDRICAL_SURFACE('',#64835,0.3); +#64835 = AXIS2_PLACEMENT_3D('',#64836,#64837,#64838); +#64836 = CARTESIAN_POINT('',(102.05,-139.68,-4.6E-02)); +#64837 = DIRECTION('',(-0.,0.,-1.)); +#64838 = DIRECTION('',(0.,1.,0.)); +#64839 = ADVANCED_FACE('',(#64840),#64851,.T.); +#64840 = FACE_BOUND('',#64841,.T.); +#64841 = EDGE_LOOP('',(#64842,#64843,#64844,#64845)); +#64842 = ORIENTED_EDGE('',*,*,#62770,.T.); +#64843 = ORIENTED_EDGE('',*,*,#64829,.T.); +#64844 = ORIENTED_EDGE('',*,*,#63768,.F.); +#64845 = ORIENTED_EDGE('',*,*,#64846,.F.); +#64846 = EDGE_CURVE('',#62762,#63760,#64847,.T.); +#64847 = LINE('',#64848,#64849); +#64848 = CARTESIAN_POINT('',(102.65,-139.98,-4.6E-02)); +#64849 = VECTOR('',#64850,1.); +#64850 = DIRECTION('',(0.,0.,1.)); +#64851 = PLANE('',#64852); +#64852 = AXIS2_PLACEMENT_3D('',#64853,#64854,#64855); +#64853 = CARTESIAN_POINT('',(102.05,-139.98,-4.6E-02)); +#64854 = DIRECTION('',(0.,1.,0.)); +#64855 = DIRECTION('',(1.,0.,0.)); +#64856 = ADVANCED_FACE('',(#64857),#64868,.F.); +#64857 = FACE_BOUND('',#64858,.T.); +#64858 = EDGE_LOOP('',(#64859,#64860,#64861,#64862)); +#64859 = ORIENTED_EDGE('',*,*,#62761,.T.); +#64860 = ORIENTED_EDGE('',*,*,#64846,.T.); +#64861 = ORIENTED_EDGE('',*,*,#63759,.F.); +#64862 = ORIENTED_EDGE('',*,*,#64863,.F.); +#64863 = EDGE_CURVE('',#62754,#63752,#64864,.T.); +#64864 = LINE('',#64865,#64866); +#64865 = CARTESIAN_POINT('',(102.65,-139.38,-4.6E-02)); +#64866 = VECTOR('',#64867,1.); +#64867 = DIRECTION('',(0.,0.,1.)); +#64868 = CYLINDRICAL_SURFACE('',#64869,0.3); +#64869 = AXIS2_PLACEMENT_3D('',#64870,#64871,#64872); +#64870 = CARTESIAN_POINT('',(102.65,-139.68,-4.6E-02)); +#64871 = DIRECTION('',(-0.,-0.,-1.)); +#64872 = DIRECTION('',(-4.736951571734E-14,-1.,0.)); +#64873 = ADVANCED_FACE('',(#64874),#64880,.T.); +#64874 = FACE_BOUND('',#64875,.T.); +#64875 = EDGE_LOOP('',(#64876,#64877,#64878,#64879)); +#64876 = ORIENTED_EDGE('',*,*,#62753,.T.); +#64877 = ORIENTED_EDGE('',*,*,#64863,.T.); +#64878 = ORIENTED_EDGE('',*,*,#63751,.F.); +#64879 = ORIENTED_EDGE('',*,*,#64822,.F.); +#64880 = PLANE('',#64881); +#64881 = AXIS2_PLACEMENT_3D('',#64882,#64883,#64884); +#64882 = CARTESIAN_POINT('',(102.65,-139.38,-4.6E-02)); +#64883 = DIRECTION('',(0.,-1.,0.)); +#64884 = DIRECTION('',(-1.,0.,0.)); +#64885 = ADVANCED_FACE('',(#64886),#64902,.F.); +#64886 = FACE_BOUND('',#64887,.T.); +#64887 = EDGE_LOOP('',(#64888,#64889,#64895,#64896)); +#64888 = ORIENTED_EDGE('',*,*,#62778,.T.); +#64889 = ORIENTED_EDGE('',*,*,#64890,.T.); +#64890 = EDGE_CURVE('',#62781,#63779,#64891,.T.); +#64891 = LINE('',#64892,#64893); +#64892 = CARTESIAN_POINT('',(105.98,-139.38,-4.6E-02)); +#64893 = VECTOR('',#64894,1.); +#64894 = DIRECTION('',(0.,0.,1.)); +#64895 = ORIENTED_EDGE('',*,*,#63776,.F.); +#64896 = ORIENTED_EDGE('',*,*,#64897,.F.); +#64897 = EDGE_CURVE('',#62779,#63777,#64898,.T.); +#64898 = LINE('',#64899,#64900); +#64899 = CARTESIAN_POINT('',(105.98,-139.98,-4.6E-02)); +#64900 = VECTOR('',#64901,1.); +#64901 = DIRECTION('',(0.,0.,1.)); +#64902 = CYLINDRICAL_SURFACE('',#64903,0.3); +#64903 = AXIS2_PLACEMENT_3D('',#64904,#64905,#64906); +#64904 = CARTESIAN_POINT('',(105.98,-139.68,-4.6E-02)); +#64905 = DIRECTION('',(-0.,0.,-1.)); +#64906 = DIRECTION('',(0.,1.,0.)); +#64907 = ADVANCED_FACE('',(#64908),#64919,.T.); +#64908 = FACE_BOUND('',#64909,.T.); +#64909 = EDGE_LOOP('',(#64910,#64911,#64912,#64913)); +#64910 = ORIENTED_EDGE('',*,*,#62806,.T.); +#64911 = ORIENTED_EDGE('',*,*,#64897,.T.); +#64912 = ORIENTED_EDGE('',*,*,#63804,.F.); +#64913 = ORIENTED_EDGE('',*,*,#64914,.F.); +#64914 = EDGE_CURVE('',#62798,#63796,#64915,.T.); +#64915 = LINE('',#64916,#64917); +#64916 = CARTESIAN_POINT('',(107.08,-139.98,-4.6E-02)); +#64917 = VECTOR('',#64918,1.); +#64918 = DIRECTION('',(0.,0.,1.)); +#64919 = PLANE('',#64920); +#64920 = AXIS2_PLACEMENT_3D('',#64921,#64922,#64923); +#64921 = CARTESIAN_POINT('',(105.98,-139.98,-4.6E-02)); +#64922 = DIRECTION('',(0.,1.,0.)); +#64923 = DIRECTION('',(1.,0.,0.)); +#64924 = ADVANCED_FACE('',(#64925),#64936,.F.); +#64925 = FACE_BOUND('',#64926,.T.); +#64926 = EDGE_LOOP('',(#64927,#64928,#64929,#64930)); +#64927 = ORIENTED_EDGE('',*,*,#62797,.T.); +#64928 = ORIENTED_EDGE('',*,*,#64914,.T.); +#64929 = ORIENTED_EDGE('',*,*,#63795,.F.); +#64930 = ORIENTED_EDGE('',*,*,#64931,.F.); +#64931 = EDGE_CURVE('',#62790,#63788,#64932,.T.); +#64932 = LINE('',#64933,#64934); +#64933 = CARTESIAN_POINT('',(107.08,-139.38,-4.6E-02)); +#64934 = VECTOR('',#64935,1.); +#64935 = DIRECTION('',(0.,0.,1.)); +#64936 = CYLINDRICAL_SURFACE('',#64937,0.3); +#64937 = AXIS2_PLACEMENT_3D('',#64938,#64939,#64940); +#64938 = CARTESIAN_POINT('',(107.08,-139.68,-4.6E-02)); +#64939 = DIRECTION('',(-0.,-0.,-1.)); +#64940 = DIRECTION('',(-0.,-1.,0.)); +#64941 = ADVANCED_FACE('',(#64942),#64948,.T.); +#64942 = FACE_BOUND('',#64943,.T.); +#64943 = EDGE_LOOP('',(#64944,#64945,#64946,#64947)); +#64944 = ORIENTED_EDGE('',*,*,#62789,.T.); +#64945 = ORIENTED_EDGE('',*,*,#64931,.T.); +#64946 = ORIENTED_EDGE('',*,*,#63787,.F.); +#64947 = ORIENTED_EDGE('',*,*,#64890,.F.); +#64948 = PLANE('',#64949); +#64949 = AXIS2_PLACEMENT_3D('',#64950,#64951,#64952); +#64950 = CARTESIAN_POINT('',(107.08,-139.38,-4.6E-02)); +#64951 = DIRECTION('',(0.,-1.,0.)); +#64952 = DIRECTION('',(-1.,0.,0.)); +#64953 = ADVANCED_FACE('',(#64954),#64965,.F.); +#64954 = FACE_BOUND('',#64955,.T.); +#64955 = EDGE_LOOP('',(#64956,#64957,#64963,#64964)); +#64956 = ORIENTED_EDGE('',*,*,#62814,.T.); +#64957 = ORIENTED_EDGE('',*,*,#64958,.T.); +#64958 = EDGE_CURVE('',#62815,#63813,#64959,.T.); +#64959 = LINE('',#64960,#64961); +#64960 = CARTESIAN_POINT('',(118.,-135.5,-4.6E-02)); +#64961 = VECTOR('',#64962,1.); +#64962 = DIRECTION('',(0.,0.,1.)); +#64963 = ORIENTED_EDGE('',*,*,#63812,.F.); +#64964 = ORIENTED_EDGE('',*,*,#64958,.F.); +#64965 = CYLINDRICAL_SURFACE('',#64966,0.5); +#64966 = AXIS2_PLACEMENT_3D('',#64967,#64968,#64969); +#64967 = CARTESIAN_POINT('',(118.,-135.,-4.6E-02)); +#64968 = DIRECTION('',(-0.,-0.,-1.)); +#64969 = DIRECTION('',(-0.,-1.,0.)); +#64970 = ADVANCED_FACE('',(#64971),#64982,.F.); +#64971 = FACE_BOUND('',#64972,.T.); +#64972 = EDGE_LOOP('',(#64973,#64974,#64980,#64981)); +#64973 = ORIENTED_EDGE('',*,*,#62825,.T.); +#64974 = ORIENTED_EDGE('',*,*,#64975,.T.); +#64975 = EDGE_CURVE('',#62826,#63824,#64976,.T.); +#64976 = LINE('',#64977,#64978); +#64977 = CARTESIAN_POINT('',(120.54,-135.5,-4.6E-02)); +#64978 = VECTOR('',#64979,1.); +#64979 = DIRECTION('',(0.,0.,1.)); +#64980 = ORIENTED_EDGE('',*,*,#63823,.F.); +#64981 = ORIENTED_EDGE('',*,*,#64975,.F.); +#64982 = CYLINDRICAL_SURFACE('',#64983,0.5); +#64983 = AXIS2_PLACEMENT_3D('',#64984,#64985,#64986); +#64984 = CARTESIAN_POINT('',(120.54,-135.,-4.6E-02)); +#64985 = DIRECTION('',(-0.,-0.,-1.)); +#64986 = DIRECTION('',(-0.,-1.,0.)); +#64987 = ADVANCED_FACE('',(#64988),#64999,.F.); +#64988 = FACE_BOUND('',#64989,.T.); +#64989 = EDGE_LOOP('',(#64990,#64991,#64997,#64998)); +#64990 = ORIENTED_EDGE('',*,*,#62836,.T.); +#64991 = ORIENTED_EDGE('',*,*,#64992,.T.); +#64992 = EDGE_CURVE('',#62837,#63835,#64993,.T.); +#64993 = LINE('',#64994,#64995); +#64994 = CARTESIAN_POINT('',(123.08,-135.5,-4.6E-02)); +#64995 = VECTOR('',#64996,1.); +#64996 = DIRECTION('',(0.,0.,1.)); +#64997 = ORIENTED_EDGE('',*,*,#63834,.F.); +#64998 = ORIENTED_EDGE('',*,*,#64992,.F.); +#64999 = CYLINDRICAL_SURFACE('',#65000,0.5); +#65000 = AXIS2_PLACEMENT_3D('',#65001,#65002,#65003); +#65001 = CARTESIAN_POINT('',(123.08,-135.,-4.6E-02)); +#65002 = DIRECTION('',(-0.,-0.,-1.)); +#65003 = DIRECTION('',(-0.,-1.,0.)); +#65004 = ADVANCED_FACE('',(#65005),#65016,.F.); +#65005 = FACE_BOUND('',#65006,.T.); +#65006 = EDGE_LOOP('',(#65007,#65008,#65014,#65015)); +#65007 = ORIENTED_EDGE('',*,*,#62847,.T.); +#65008 = ORIENTED_EDGE('',*,*,#65009,.T.); +#65009 = EDGE_CURVE('',#62848,#63846,#65010,.T.); +#65010 = LINE('',#65011,#65012); +#65011 = CARTESIAN_POINT('',(177.5,-160.12,-4.6E-02)); +#65012 = VECTOR('',#65013,1.); +#65013 = DIRECTION('',(0.,0.,1.)); +#65014 = ORIENTED_EDGE('',*,*,#63845,.F.); +#65015 = ORIENTED_EDGE('',*,*,#65009,.F.); +#65016 = CYLINDRICAL_SURFACE('',#65017,0.5); +#65017 = AXIS2_PLACEMENT_3D('',#65018,#65019,#65020); +#65018 = CARTESIAN_POINT('',(177.5,-159.62,-4.6E-02)); +#65019 = DIRECTION('',(-0.,-0.,-1.)); +#65020 = DIRECTION('',(-0.,-1.,0.)); +#65021 = ADVANCED_FACE('',(#65022),#65033,.F.); +#65022 = FACE_BOUND('',#65023,.T.); +#65023 = EDGE_LOOP('',(#65024,#65025,#65031,#65032)); +#65024 = ORIENTED_EDGE('',*,*,#62858,.T.); +#65025 = ORIENTED_EDGE('',*,*,#65026,.T.); +#65026 = EDGE_CURVE('',#62859,#63857,#65027,.T.); +#65027 = LINE('',#65028,#65029); +#65028 = CARTESIAN_POINT('',(177.5,-157.58,-4.6E-02)); +#65029 = VECTOR('',#65030,1.); +#65030 = DIRECTION('',(0.,0.,1.)); +#65031 = ORIENTED_EDGE('',*,*,#63856,.F.); +#65032 = ORIENTED_EDGE('',*,*,#65026,.F.); +#65033 = CYLINDRICAL_SURFACE('',#65034,0.5); +#65034 = AXIS2_PLACEMENT_3D('',#65035,#65036,#65037); +#65035 = CARTESIAN_POINT('',(177.5,-157.08,-4.6E-02)); +#65036 = DIRECTION('',(-0.,-0.,-1.)); +#65037 = DIRECTION('',(-0.,-1.,0.)); +#65038 = ADVANCED_FACE('',(#65039),#65050,.F.); +#65039 = FACE_BOUND('',#65040,.T.); +#65040 = EDGE_LOOP('',(#65041,#65042,#65048,#65049)); +#65041 = ORIENTED_EDGE('',*,*,#62869,.T.); +#65042 = ORIENTED_EDGE('',*,*,#65043,.T.); +#65043 = EDGE_CURVE('',#62870,#63868,#65044,.T.); +#65044 = LINE('',#65045,#65046); +#65045 = CARTESIAN_POINT('',(177.5,-155.04,-4.6E-02)); +#65046 = VECTOR('',#65047,1.); +#65047 = DIRECTION('',(0.,0.,1.)); +#65048 = ORIENTED_EDGE('',*,*,#63867,.F.); +#65049 = ORIENTED_EDGE('',*,*,#65043,.F.); +#65050 = CYLINDRICAL_SURFACE('',#65051,0.5); +#65051 = AXIS2_PLACEMENT_3D('',#65052,#65053,#65054); +#65052 = CARTESIAN_POINT('',(177.5,-154.54,-4.6E-02)); +#65053 = DIRECTION('',(-0.,-0.,-1.)); +#65054 = DIRECTION('',(-0.,-1.,0.)); +#65055 = ADVANCED_FACE('',(#65056),#65067,.F.); +#65056 = FACE_BOUND('',#65057,.T.); +#65057 = EDGE_LOOP('',(#65058,#65059,#65065,#65066)); +#65058 = ORIENTED_EDGE('',*,*,#62880,.T.); +#65059 = ORIENTED_EDGE('',*,*,#65060,.T.); +#65060 = EDGE_CURVE('',#62881,#63879,#65061,.T.); +#65061 = LINE('',#65062,#65063); +#65062 = CARTESIAN_POINT('',(166.04,-152.32,-4.6E-02)); +#65063 = VECTOR('',#65064,1.); +#65064 = DIRECTION('',(0.,0.,1.)); +#65065 = ORIENTED_EDGE('',*,*,#63878,.F.); +#65066 = ORIENTED_EDGE('',*,*,#65060,.F.); +#65067 = CYLINDRICAL_SURFACE('',#65068,1.6); +#65068 = AXIS2_PLACEMENT_3D('',#65069,#65070,#65071); +#65069 = CARTESIAN_POINT('',(166.04,-150.72,-4.6E-02)); +#65070 = DIRECTION('',(-0.,-0.,-1.)); +#65071 = DIRECTION('',(-0.,-1.,0.)); +#65072 = ADVANCED_FACE('',(#65073),#65084,.F.); +#65073 = FACE_BOUND('',#65074,.T.); +#65074 = EDGE_LOOP('',(#65075,#65076,#65082,#65083)); +#65075 = ORIENTED_EDGE('',*,*,#62891,.T.); +#65076 = ORIENTED_EDGE('',*,*,#65077,.T.); +#65077 = EDGE_CURVE('',#62892,#63890,#65078,.T.); +#65078 = LINE('',#65079,#65080); +#65079 = CARTESIAN_POINT('',(177.5,-152.5,-4.6E-02)); +#65080 = VECTOR('',#65081,1.); +#65081 = DIRECTION('',(0.,0.,1.)); +#65082 = ORIENTED_EDGE('',*,*,#63889,.F.); +#65083 = ORIENTED_EDGE('',*,*,#65077,.F.); +#65084 = CYLINDRICAL_SURFACE('',#65085,0.5); +#65085 = AXIS2_PLACEMENT_3D('',#65086,#65087,#65088); +#65086 = CARTESIAN_POINT('',(177.5,-152.,-4.6E-02)); +#65087 = DIRECTION('',(-0.,-0.,-1.)); +#65088 = DIRECTION('',(-0.,-1.,0.)); +#65089 = ADVANCED_FACE('',(#65090),#65101,.F.); +#65090 = FACE_BOUND('',#65091,.T.); +#65091 = EDGE_LOOP('',(#65092,#65093,#65099,#65100)); +#65092 = ORIENTED_EDGE('',*,*,#62902,.T.); +#65093 = ORIENTED_EDGE('',*,*,#65094,.T.); +#65094 = EDGE_CURVE('',#62903,#63901,#65095,.T.); +#65095 = LINE('',#65096,#65097); +#65096 = CARTESIAN_POINT('',(176.5,-146.175,-4.6E-02)); +#65097 = VECTOR('',#65098,1.); +#65098 = DIRECTION('',(0.,0.,1.)); +#65099 = ORIENTED_EDGE('',*,*,#63900,.F.); +#65100 = ORIENTED_EDGE('',*,*,#65094,.F.); +#65101 = CYLINDRICAL_SURFACE('',#65102,0.475); +#65102 = AXIS2_PLACEMENT_3D('',#65103,#65104,#65105); +#65103 = CARTESIAN_POINT('',(176.5,-145.7,-4.6E-02)); +#65104 = DIRECTION('',(-0.,-0.,-1.)); +#65105 = DIRECTION('',(-0.,-1.,0.)); +#65106 = ADVANCED_FACE('',(#65107),#65118,.F.); +#65107 = FACE_BOUND('',#65108,.T.); +#65108 = EDGE_LOOP('',(#65109,#65110,#65116,#65117)); +#65109 = ORIENTED_EDGE('',*,*,#62913,.T.); +#65110 = ORIENTED_EDGE('',*,*,#65111,.T.); +#65111 = EDGE_CURVE('',#62914,#63912,#65112,.T.); +#65112 = LINE('',#65113,#65114); +#65113 = CARTESIAN_POINT('',(176.5,-143.675,-4.6E-02)); +#65114 = VECTOR('',#65115,1.); +#65115 = DIRECTION('',(0.,0.,1.)); +#65116 = ORIENTED_EDGE('',*,*,#63911,.F.); +#65117 = ORIENTED_EDGE('',*,*,#65111,.F.); +#65118 = CYLINDRICAL_SURFACE('',#65119,0.475); +#65119 = AXIS2_PLACEMENT_3D('',#65120,#65121,#65122); +#65120 = CARTESIAN_POINT('',(176.5,-143.2,-4.6E-02)); +#65121 = DIRECTION('',(-0.,-0.,-1.)); +#65122 = DIRECTION('',(-0.,-1.,0.)); +#65123 = ADVANCED_FACE('',(#65124),#65135,.F.); +#65124 = FACE_BOUND('',#65125,.T.); +#65125 = EDGE_LOOP('',(#65126,#65127,#65133,#65134)); +#65126 = ORIENTED_EDGE('',*,*,#62924,.T.); +#65127 = ORIENTED_EDGE('',*,*,#65128,.T.); +#65128 = EDGE_CURVE('',#62925,#63923,#65129,.T.); +#65129 = LINE('',#65130,#65131); +#65130 = CARTESIAN_POINT('',(176.5,-141.175,-4.6E-02)); +#65131 = VECTOR('',#65132,1.); +#65132 = DIRECTION('',(0.,0.,1.)); +#65133 = ORIENTED_EDGE('',*,*,#63922,.F.); +#65134 = ORIENTED_EDGE('',*,*,#65128,.F.); +#65135 = CYLINDRICAL_SURFACE('',#65136,0.475); +#65136 = AXIS2_PLACEMENT_3D('',#65137,#65138,#65139); +#65137 = CARTESIAN_POINT('',(176.5,-140.7,-4.6E-02)); +#65138 = DIRECTION('',(-0.,-0.,-1.)); +#65139 = DIRECTION('',(-0.,-1.,0.)); +#65140 = ADVANCED_FACE('',(#65141),#65152,.F.); +#65141 = FACE_BOUND('',#65142,.T.); +#65142 = EDGE_LOOP('',(#65143,#65144,#65150,#65151)); +#65143 = ORIENTED_EDGE('',*,*,#62935,.T.); +#65144 = ORIENTED_EDGE('',*,*,#65145,.T.); +#65145 = EDGE_CURVE('',#62936,#63934,#65146,.T.); +#65146 = LINE('',#65147,#65148); +#65147 = CARTESIAN_POINT('',(176.5,-135.075,-4.6E-02)); +#65148 = VECTOR('',#65149,1.); +#65149 = DIRECTION('',(0.,0.,1.)); +#65150 = ORIENTED_EDGE('',*,*,#63933,.F.); +#65151 = ORIENTED_EDGE('',*,*,#65145,.F.); +#65152 = CYLINDRICAL_SURFACE('',#65153,0.475); +#65153 = AXIS2_PLACEMENT_3D('',#65154,#65155,#65156); +#65154 = CARTESIAN_POINT('',(176.5,-134.6,-4.6E-02)); +#65155 = DIRECTION('',(-0.,-0.,-1.)); +#65156 = DIRECTION('',(-0.,-1.,0.)); +#65157 = ADVANCED_FACE('',(#65158),#65169,.F.); +#65158 = FACE_BOUND('',#65159,.T.); +#65159 = EDGE_LOOP('',(#65160,#65161,#65167,#65168)); +#65160 = ORIENTED_EDGE('',*,*,#62946,.T.); +#65161 = ORIENTED_EDGE('',*,*,#65162,.T.); +#65162 = EDGE_CURVE('',#62947,#63945,#65163,.T.); +#65163 = LINE('',#65164,#65165); +#65164 = CARTESIAN_POINT('',(176.5,-132.575,-4.6E-02)); +#65165 = VECTOR('',#65166,1.); +#65166 = DIRECTION('',(0.,0.,1.)); +#65167 = ORIENTED_EDGE('',*,*,#63944,.F.); +#65168 = ORIENTED_EDGE('',*,*,#65162,.F.); +#65169 = CYLINDRICAL_SURFACE('',#65170,0.475); +#65170 = AXIS2_PLACEMENT_3D('',#65171,#65172,#65173); +#65171 = CARTESIAN_POINT('',(176.5,-132.1,-4.6E-02)); +#65172 = DIRECTION('',(-0.,-0.,-1.)); +#65173 = DIRECTION('',(-0.,-1.,0.)); +#65174 = ADVANCED_FACE('',(#65175),#65191,.F.); +#65175 = FACE_BOUND('',#65176,.T.); +#65176 = EDGE_LOOP('',(#65177,#65178,#65184,#65185)); +#65177 = ORIENTED_EDGE('',*,*,#62957,.T.); +#65178 = ORIENTED_EDGE('',*,*,#65179,.T.); +#65179 = EDGE_CURVE('',#62960,#63958,#65180,.T.); +#65180 = LINE('',#65181,#65182); +#65181 = CARTESIAN_POINT('',(104.55,-129.,-4.6E-02)); +#65182 = VECTOR('',#65183,1.); +#65183 = DIRECTION('',(0.,0.,1.)); +#65184 = ORIENTED_EDGE('',*,*,#63955,.F.); +#65185 = ORIENTED_EDGE('',*,*,#65186,.F.); +#65186 = EDGE_CURVE('',#62958,#63956,#65187,.T.); +#65187 = LINE('',#65188,#65189); +#65188 = CARTESIAN_POINT('',(104.55,-130.,-4.6E-02)); +#65189 = VECTOR('',#65190,1.); +#65190 = DIRECTION('',(0.,0.,1.)); +#65191 = CYLINDRICAL_SURFACE('',#65192,0.5); +#65192 = AXIS2_PLACEMENT_3D('',#65193,#65194,#65195); +#65193 = CARTESIAN_POINT('',(104.55,-129.5,-4.6E-02)); +#65194 = DIRECTION('',(-0.,0.,-1.)); +#65195 = DIRECTION('',(0.,1.,0.)); +#65196 = ADVANCED_FACE('',(#65197),#65208,.T.); +#65197 = FACE_BOUND('',#65198,.T.); +#65198 = EDGE_LOOP('',(#65199,#65200,#65201,#65202)); +#65199 = ORIENTED_EDGE('',*,*,#62985,.T.); +#65200 = ORIENTED_EDGE('',*,*,#65186,.T.); +#65201 = ORIENTED_EDGE('',*,*,#63983,.F.); +#65202 = ORIENTED_EDGE('',*,*,#65203,.F.); +#65203 = EDGE_CURVE('',#62977,#63975,#65204,.T.); +#65204 = LINE('',#65205,#65206); +#65205 = CARTESIAN_POINT('',(106.05,-130.,-4.6E-02)); +#65206 = VECTOR('',#65207,1.); +#65207 = DIRECTION('',(0.,0.,1.)); +#65208 = PLANE('',#65209); +#65209 = AXIS2_PLACEMENT_3D('',#65210,#65211,#65212); +#65210 = CARTESIAN_POINT('',(104.55,-130.,-4.6E-02)); +#65211 = DIRECTION('',(0.,1.,0.)); +#65212 = DIRECTION('',(1.,0.,0.)); +#65213 = ADVANCED_FACE('',(#65214),#65225,.F.); +#65214 = FACE_BOUND('',#65215,.T.); +#65215 = EDGE_LOOP('',(#65216,#65217,#65218,#65219)); +#65216 = ORIENTED_EDGE('',*,*,#62976,.T.); +#65217 = ORIENTED_EDGE('',*,*,#65203,.T.); +#65218 = ORIENTED_EDGE('',*,*,#63974,.F.); +#65219 = ORIENTED_EDGE('',*,*,#65220,.F.); +#65220 = EDGE_CURVE('',#62969,#63967,#65221,.T.); +#65221 = LINE('',#65222,#65223); +#65222 = CARTESIAN_POINT('',(106.05,-129.,-4.6E-02)); +#65223 = VECTOR('',#65224,1.); +#65224 = DIRECTION('',(0.,0.,1.)); +#65225 = CYLINDRICAL_SURFACE('',#65226,0.5); +#65226 = AXIS2_PLACEMENT_3D('',#65227,#65228,#65229); +#65227 = CARTESIAN_POINT('',(106.05,-129.5,-4.6E-02)); +#65228 = DIRECTION('',(-0.,-0.,-1.)); +#65229 = DIRECTION('',(-0.,-1.,0.)); +#65230 = ADVANCED_FACE('',(#65231),#65237,.T.); +#65231 = FACE_BOUND('',#65232,.T.); +#65232 = EDGE_LOOP('',(#65233,#65234,#65235,#65236)); +#65233 = ORIENTED_EDGE('',*,*,#62968,.T.); +#65234 = ORIENTED_EDGE('',*,*,#65220,.T.); +#65235 = ORIENTED_EDGE('',*,*,#63966,.F.); +#65236 = ORIENTED_EDGE('',*,*,#65179,.F.); +#65237 = PLANE('',#65238); +#65238 = AXIS2_PLACEMENT_3D('',#65239,#65240,#65241); +#65239 = CARTESIAN_POINT('',(106.05,-129.,-4.6E-02)); +#65240 = DIRECTION('',(0.,-1.,0.)); +#65241 = DIRECTION('',(-1.,0.,0.)); +#65242 = ADVANCED_FACE('',(#65243),#65254,.F.); +#65243 = FACE_BOUND('',#65244,.T.); +#65244 = EDGE_LOOP('',(#65245,#65246,#65252,#65253)); +#65245 = ORIENTED_EDGE('',*,*,#62993,.T.); +#65246 = ORIENTED_EDGE('',*,*,#65247,.T.); +#65247 = EDGE_CURVE('',#62994,#63992,#65248,.T.); +#65248 = LINE('',#65249,#65250); +#65249 = CARTESIAN_POINT('',(103.3,-125.8,-4.6E-02)); +#65250 = VECTOR('',#65251,1.); +#65251 = DIRECTION('',(0.,0.,1.)); +#65252 = ORIENTED_EDGE('',*,*,#63991,.F.); +#65253 = ORIENTED_EDGE('',*,*,#65247,.F.); +#65254 = CYLINDRICAL_SURFACE('',#65255,0.8); +#65255 = AXIS2_PLACEMENT_3D('',#65256,#65257,#65258); +#65256 = CARTESIAN_POINT('',(103.3,-125.,-4.6E-02)); +#65257 = DIRECTION('',(-0.,-0.,-1.)); +#65258 = DIRECTION('',(-0.,-1.,0.)); +#65259 = ADVANCED_FACE('',(#65260),#65276,.F.); +#65260 = FACE_BOUND('',#65261,.T.); +#65261 = EDGE_LOOP('',(#65262,#65263,#65269,#65270)); +#65262 = ORIENTED_EDGE('',*,*,#63004,.T.); +#65263 = ORIENTED_EDGE('',*,*,#65264,.T.); +#65264 = EDGE_CURVE('',#63007,#64005,#65265,.T.); +#65265 = LINE('',#65266,#65267); +#65266 = CARTESIAN_POINT('',(105.8,-125.65,-4.6E-02)); +#65267 = VECTOR('',#65268,1.); +#65268 = DIRECTION('',(0.,0.,1.)); +#65269 = ORIENTED_EDGE('',*,*,#64002,.F.); +#65270 = ORIENTED_EDGE('',*,*,#65271,.F.); +#65271 = EDGE_CURVE('',#63005,#64003,#65272,.T.); +#65272 = LINE('',#65273,#65274); +#65273 = CARTESIAN_POINT('',(106.8,-125.65,-4.6E-02)); +#65274 = VECTOR('',#65275,1.); +#65275 = DIRECTION('',(0.,0.,1.)); +#65276 = CYLINDRICAL_SURFACE('',#65277,0.5); +#65277 = AXIS2_PLACEMENT_3D('',#65278,#65279,#65280); +#65278 = CARTESIAN_POINT('',(106.3,-125.65,-4.6E-02)); +#65279 = DIRECTION('',(-0.,-0.,-1.)); +#65280 = DIRECTION('',(-1.,0.,-0.)); +#65281 = ADVANCED_FACE('',(#65282),#65293,.T.); +#65282 = FACE_BOUND('',#65283,.T.); +#65283 = EDGE_LOOP('',(#65284,#65285,#65286,#65287)); +#65284 = ORIENTED_EDGE('',*,*,#63032,.T.); +#65285 = ORIENTED_EDGE('',*,*,#65271,.T.); +#65286 = ORIENTED_EDGE('',*,*,#64030,.F.); +#65287 = ORIENTED_EDGE('',*,*,#65288,.F.); +#65288 = EDGE_CURVE('',#63024,#64022,#65289,.T.); +#65289 = LINE('',#65290,#65291); +#65290 = CARTESIAN_POINT('',(106.8,-124.35,-4.6E-02)); +#65291 = VECTOR('',#65292,1.); +#65292 = DIRECTION('',(0.,0.,1.)); +#65293 = PLANE('',#65294); +#65294 = AXIS2_PLACEMENT_3D('',#65295,#65296,#65297); +#65295 = CARTESIAN_POINT('',(106.8,-125.65,-4.6E-02)); +#65296 = DIRECTION('',(-1.,0.,0.)); +#65297 = DIRECTION('',(0.,1.,0.)); +#65298 = ADVANCED_FACE('',(#65299),#65310,.F.); +#65299 = FACE_BOUND('',#65300,.T.); +#65300 = EDGE_LOOP('',(#65301,#65302,#65303,#65304)); +#65301 = ORIENTED_EDGE('',*,*,#63023,.T.); +#65302 = ORIENTED_EDGE('',*,*,#65288,.T.); +#65303 = ORIENTED_EDGE('',*,*,#64021,.F.); +#65304 = ORIENTED_EDGE('',*,*,#65305,.F.); +#65305 = EDGE_CURVE('',#63016,#64014,#65306,.T.); +#65306 = LINE('',#65307,#65308); +#65307 = CARTESIAN_POINT('',(105.8,-124.35,-4.6E-02)); +#65308 = VECTOR('',#65309,1.); +#65309 = DIRECTION('',(0.,0.,1.)); +#65310 = CYLINDRICAL_SURFACE('',#65311,0.5); +#65311 = AXIS2_PLACEMENT_3D('',#65312,#65313,#65314); +#65312 = CARTESIAN_POINT('',(106.3,-124.35,-4.6E-02)); +#65313 = DIRECTION('',(-0.,-0.,-1.)); +#65314 = DIRECTION('',(1.,0.,-0.)); +#65315 = ADVANCED_FACE('',(#65316),#65322,.T.); +#65316 = FACE_BOUND('',#65317,.T.); +#65317 = EDGE_LOOP('',(#65318,#65319,#65320,#65321)); +#65318 = ORIENTED_EDGE('',*,*,#63015,.T.); +#65319 = ORIENTED_EDGE('',*,*,#65305,.T.); +#65320 = ORIENTED_EDGE('',*,*,#64013,.F.); +#65321 = ORIENTED_EDGE('',*,*,#65264,.F.); +#65322 = PLANE('',#65323); +#65323 = AXIS2_PLACEMENT_3D('',#65324,#65325,#65326); +#65324 = CARTESIAN_POINT('',(105.8,-124.35,-4.6E-02)); +#65325 = DIRECTION('',(1.,0.,-0.)); +#65326 = DIRECTION('',(0.,-1.,0.)); +#65327 = ADVANCED_FACE('',(#65328),#65344,.F.); +#65328 = FACE_BOUND('',#65329,.T.); +#65329 = EDGE_LOOP('',(#65330,#65331,#65337,#65338)); +#65330 = ORIENTED_EDGE('',*,*,#63040,.T.); +#65331 = ORIENTED_EDGE('',*,*,#65332,.T.); +#65332 = EDGE_CURVE('',#63043,#64041,#65333,.T.); +#65333 = LINE('',#65334,#65335); +#65334 = CARTESIAN_POINT('',(111.8,-126.,-4.6E-02)); +#65335 = VECTOR('',#65336,1.); +#65336 = DIRECTION('',(0.,0.,1.)); +#65337 = ORIENTED_EDGE('',*,*,#64038,.F.); +#65338 = ORIENTED_EDGE('',*,*,#65339,.F.); +#65339 = EDGE_CURVE('',#63041,#64039,#65340,.T.); +#65340 = LINE('',#65341,#65342); +#65341 = CARTESIAN_POINT('',(112.8,-126.,-4.6E-02)); +#65342 = VECTOR('',#65343,1.); +#65343 = DIRECTION('',(0.,0.,1.)); +#65344 = CYLINDRICAL_SURFACE('',#65345,0.5); +#65345 = AXIS2_PLACEMENT_3D('',#65346,#65347,#65348); +#65346 = CARTESIAN_POINT('',(112.3,-126.,-4.6E-02)); +#65347 = DIRECTION('',(-0.,-0.,-1.)); +#65348 = DIRECTION('',(-1.,0.,-0.)); +#65349 = ADVANCED_FACE('',(#65350),#65361,.T.); +#65350 = FACE_BOUND('',#65351,.T.); +#65351 = EDGE_LOOP('',(#65352,#65353,#65354,#65355)); +#65352 = ORIENTED_EDGE('',*,*,#63068,.T.); +#65353 = ORIENTED_EDGE('',*,*,#65339,.T.); +#65354 = ORIENTED_EDGE('',*,*,#64066,.F.); +#65355 = ORIENTED_EDGE('',*,*,#65356,.F.); +#65356 = EDGE_CURVE('',#63060,#64058,#65357,.T.); +#65357 = LINE('',#65358,#65359); +#65358 = CARTESIAN_POINT('',(112.8,-124.,-4.6E-02)); +#65359 = VECTOR('',#65360,1.); +#65360 = DIRECTION('',(0.,0.,1.)); +#65361 = PLANE('',#65362); +#65362 = AXIS2_PLACEMENT_3D('',#65363,#65364,#65365); +#65363 = CARTESIAN_POINT('',(112.8,-126.,-4.6E-02)); +#65364 = DIRECTION('',(-1.,0.,0.)); +#65365 = DIRECTION('',(0.,1.,0.)); +#65366 = ADVANCED_FACE('',(#65367),#65378,.F.); +#65367 = FACE_BOUND('',#65368,.T.); +#65368 = EDGE_LOOP('',(#65369,#65370,#65371,#65372)); +#65369 = ORIENTED_EDGE('',*,*,#63059,.T.); +#65370 = ORIENTED_EDGE('',*,*,#65356,.T.); +#65371 = ORIENTED_EDGE('',*,*,#64057,.F.); +#65372 = ORIENTED_EDGE('',*,*,#65373,.F.); +#65373 = EDGE_CURVE('',#63052,#64050,#65374,.T.); +#65374 = LINE('',#65375,#65376); +#65375 = CARTESIAN_POINT('',(111.8,-124.,-4.6E-02)); +#65376 = VECTOR('',#65377,1.); +#65377 = DIRECTION('',(0.,0.,1.)); +#65378 = CYLINDRICAL_SURFACE('',#65379,0.5); +#65379 = AXIS2_PLACEMENT_3D('',#65380,#65381,#65382); +#65380 = CARTESIAN_POINT('',(112.3,-124.,-4.6E-02)); +#65381 = DIRECTION('',(-0.,-0.,-1.)); +#65382 = DIRECTION('',(1.,0.,-0.)); +#65383 = ADVANCED_FACE('',(#65384),#65390,.T.); +#65384 = FACE_BOUND('',#65385,.T.); +#65385 = EDGE_LOOP('',(#65386,#65387,#65388,#65389)); +#65386 = ORIENTED_EDGE('',*,*,#63051,.T.); +#65387 = ORIENTED_EDGE('',*,*,#65373,.T.); +#65388 = ORIENTED_EDGE('',*,*,#64049,.F.); +#65389 = ORIENTED_EDGE('',*,*,#65332,.F.); +#65390 = PLANE('',#65391); +#65391 = AXIS2_PLACEMENT_3D('',#65392,#65393,#65394); +#65392 = CARTESIAN_POINT('',(111.8,-124.,-4.6E-02)); +#65393 = DIRECTION('',(1.,0.,-0.)); +#65394 = DIRECTION('',(0.,-1.,0.)); +#65395 = ADVANCED_FACE('',(#65396),#65412,.F.); +#65396 = FACE_BOUND('',#65397,.T.); +#65397 = EDGE_LOOP('',(#65398,#65399,#65405,#65406)); +#65398 = ORIENTED_EDGE('',*,*,#63076,.T.); +#65399 = ORIENTED_EDGE('',*,*,#65400,.T.); +#65400 = EDGE_CURVE('',#63079,#64077,#65401,.T.); +#65401 = LINE('',#65402,#65403); +#65402 = CARTESIAN_POINT('',(104.55,-120.,-4.6E-02)); +#65403 = VECTOR('',#65404,1.); +#65404 = DIRECTION('',(0.,0.,1.)); +#65405 = ORIENTED_EDGE('',*,*,#64074,.F.); +#65406 = ORIENTED_EDGE('',*,*,#65407,.F.); +#65407 = EDGE_CURVE('',#63077,#64075,#65408,.T.); +#65408 = LINE('',#65409,#65410); +#65409 = CARTESIAN_POINT('',(104.55,-121.,-4.6E-02)); +#65410 = VECTOR('',#65411,1.); +#65411 = DIRECTION('',(0.,0.,1.)); +#65412 = CYLINDRICAL_SURFACE('',#65413,0.5); +#65413 = AXIS2_PLACEMENT_3D('',#65414,#65415,#65416); +#65414 = CARTESIAN_POINT('',(104.55,-120.5,-4.6E-02)); +#65415 = DIRECTION('',(-0.,0.,-1.)); +#65416 = DIRECTION('',(0.,1.,0.)); +#65417 = ADVANCED_FACE('',(#65418),#65429,.T.); +#65418 = FACE_BOUND('',#65419,.T.); +#65419 = EDGE_LOOP('',(#65420,#65421,#65422,#65423)); +#65420 = ORIENTED_EDGE('',*,*,#63104,.T.); +#65421 = ORIENTED_EDGE('',*,*,#65407,.T.); +#65422 = ORIENTED_EDGE('',*,*,#64102,.F.); +#65423 = ORIENTED_EDGE('',*,*,#65424,.F.); +#65424 = EDGE_CURVE('',#63096,#64094,#65425,.T.); +#65425 = LINE('',#65426,#65427); +#65426 = CARTESIAN_POINT('',(106.05,-121.,-4.6E-02)); +#65427 = VECTOR('',#65428,1.); +#65428 = DIRECTION('',(0.,0.,1.)); +#65429 = PLANE('',#65430); +#65430 = AXIS2_PLACEMENT_3D('',#65431,#65432,#65433); +#65431 = CARTESIAN_POINT('',(104.55,-121.,-4.6E-02)); +#65432 = DIRECTION('',(0.,1.,0.)); +#65433 = DIRECTION('',(1.,0.,0.)); +#65434 = ADVANCED_FACE('',(#65435),#65446,.F.); +#65435 = FACE_BOUND('',#65436,.T.); +#65436 = EDGE_LOOP('',(#65437,#65438,#65439,#65440)); +#65437 = ORIENTED_EDGE('',*,*,#63095,.T.); +#65438 = ORIENTED_EDGE('',*,*,#65424,.T.); +#65439 = ORIENTED_EDGE('',*,*,#64093,.F.); +#65440 = ORIENTED_EDGE('',*,*,#65441,.F.); +#65441 = EDGE_CURVE('',#63088,#64086,#65442,.T.); +#65442 = LINE('',#65443,#65444); +#65443 = CARTESIAN_POINT('',(106.05,-120.,-4.6E-02)); +#65444 = VECTOR('',#65445,1.); +#65445 = DIRECTION('',(0.,0.,1.)); +#65446 = CYLINDRICAL_SURFACE('',#65447,0.5); +#65447 = AXIS2_PLACEMENT_3D('',#65448,#65449,#65450); +#65448 = CARTESIAN_POINT('',(106.05,-120.5,-4.6E-02)); +#65449 = DIRECTION('',(-0.,-0.,-1.)); +#65450 = DIRECTION('',(-0.,-1.,0.)); +#65451 = ADVANCED_FACE('',(#65452),#65458,.T.); +#65452 = FACE_BOUND('',#65453,.T.); +#65453 = EDGE_LOOP('',(#65454,#65455,#65456,#65457)); +#65454 = ORIENTED_EDGE('',*,*,#63087,.T.); +#65455 = ORIENTED_EDGE('',*,*,#65441,.T.); +#65456 = ORIENTED_EDGE('',*,*,#64085,.F.); +#65457 = ORIENTED_EDGE('',*,*,#65400,.F.); +#65458 = PLANE('',#65459); +#65459 = AXIS2_PLACEMENT_3D('',#65460,#65461,#65462); +#65460 = CARTESIAN_POINT('',(106.05,-120.,-4.6E-02)); +#65461 = DIRECTION('',(0.,-1.,0.)); +#65462 = DIRECTION('',(-1.,0.,0.)); +#65463 = ADVANCED_FACE('',(#65464),#65475,.F.); +#65464 = FACE_BOUND('',#65465,.T.); +#65465 = EDGE_LOOP('',(#65466,#65467,#65473,#65474)); +#65466 = ORIENTED_EDGE('',*,*,#63112,.T.); +#65467 = ORIENTED_EDGE('',*,*,#65468,.T.); +#65468 = EDGE_CURVE('',#63113,#64111,#65469,.T.); +#65469 = LINE('',#65470,#65471); +#65470 = CARTESIAN_POINT('',(104.5,-111.375,-4.6E-02)); +#65471 = VECTOR('',#65472,1.); +#65472 = DIRECTION('',(0.,0.,1.)); +#65473 = ORIENTED_EDGE('',*,*,#64110,.F.); +#65474 = ORIENTED_EDGE('',*,*,#65468,.F.); +#65475 = CYLINDRICAL_SURFACE('',#65476,0.475); +#65476 = AXIS2_PLACEMENT_3D('',#65477,#65478,#65479); +#65477 = CARTESIAN_POINT('',(104.5,-110.9,-4.6E-02)); +#65478 = DIRECTION('',(-0.,-0.,-1.)); +#65479 = DIRECTION('',(-0.,-1.,0.)); +#65480 = ADVANCED_FACE('',(#65481),#65492,.F.); +#65481 = FACE_BOUND('',#65482,.T.); +#65482 = EDGE_LOOP('',(#65483,#65484,#65490,#65491)); +#65483 = ORIENTED_EDGE('',*,*,#63123,.T.); +#65484 = ORIENTED_EDGE('',*,*,#65485,.T.); +#65485 = EDGE_CURVE('',#63124,#64122,#65486,.T.); +#65486 = LINE('',#65487,#65488); +#65487 = CARTESIAN_POINT('',(120.32,-115.,-4.6E-02)); +#65488 = VECTOR('',#65489,1.); +#65489 = DIRECTION('',(0.,0.,1.)); +#65490 = ORIENTED_EDGE('',*,*,#64121,.F.); +#65491 = ORIENTED_EDGE('',*,*,#65485,.F.); +#65492 = CYLINDRICAL_SURFACE('',#65493,0.4); +#65493 = AXIS2_PLACEMENT_3D('',#65494,#65495,#65496); +#65494 = CARTESIAN_POINT('',(120.32,-114.6,-4.6E-02)); +#65495 = DIRECTION('',(-0.,-0.,-1.)); +#65496 = DIRECTION('',(-0.,-1.,0.)); +#65497 = ADVANCED_FACE('',(#65498),#65509,.F.); +#65498 = FACE_BOUND('',#65499,.T.); +#65499 = EDGE_LOOP('',(#65500,#65501,#65507,#65508)); +#65500 = ORIENTED_EDGE('',*,*,#63134,.T.); +#65501 = ORIENTED_EDGE('',*,*,#65502,.T.); +#65502 = EDGE_CURVE('',#63135,#64133,#65503,.T.); +#65503 = LINE('',#65504,#65505); +#65504 = CARTESIAN_POINT('',(104.5,-108.875,-4.6E-02)); +#65505 = VECTOR('',#65506,1.); +#65506 = DIRECTION('',(0.,0.,1.)); +#65507 = ORIENTED_EDGE('',*,*,#64132,.F.); +#65508 = ORIENTED_EDGE('',*,*,#65502,.F.); +#65509 = CYLINDRICAL_SURFACE('',#65510,0.475); +#65510 = AXIS2_PLACEMENT_3D('',#65511,#65512,#65513); +#65511 = CARTESIAN_POINT('',(104.5,-108.4,-4.6E-02)); +#65512 = DIRECTION('',(-0.,-0.,-1.)); +#65513 = DIRECTION('',(-0.,-1.,0.)); +#65514 = ADVANCED_FACE('',(#65515),#65526,.F.); +#65515 = FACE_BOUND('',#65516,.T.); +#65516 = EDGE_LOOP('',(#65517,#65518,#65524,#65525)); +#65517 = ORIENTED_EDGE('',*,*,#63145,.T.); +#65518 = ORIENTED_EDGE('',*,*,#65519,.T.); +#65519 = EDGE_CURVE('',#63146,#64144,#65520,.T.); +#65520 = LINE('',#65521,#65522); +#65521 = CARTESIAN_POINT('',(104.5,-106.375,-4.6E-02)); +#65522 = VECTOR('',#65523,1.); +#65523 = DIRECTION('',(0.,0.,1.)); +#65524 = ORIENTED_EDGE('',*,*,#64143,.F.); +#65525 = ORIENTED_EDGE('',*,*,#65519,.F.); +#65526 = CYLINDRICAL_SURFACE('',#65527,0.475); +#65527 = AXIS2_PLACEMENT_3D('',#65528,#65529,#65530); +#65528 = CARTESIAN_POINT('',(104.5,-105.9,-4.6E-02)); +#65529 = DIRECTION('',(-0.,-0.,-1.)); +#65530 = DIRECTION('',(-0.,-1.,0.)); +#65531 = ADVANCED_FACE('',(#65532),#65543,.F.); +#65532 = FACE_BOUND('',#65533,.T.); +#65533 = EDGE_LOOP('',(#65534,#65535,#65541,#65542)); +#65534 = ORIENTED_EDGE('',*,*,#63156,.T.); +#65535 = ORIENTED_EDGE('',*,*,#65536,.T.); +#65536 = EDGE_CURVE('',#63157,#64155,#65537,.T.); +#65537 = LINE('',#65538,#65539); +#65538 = CARTESIAN_POINT('',(104.5,-103.875,-4.6E-02)); +#65539 = VECTOR('',#65540,1.); +#65540 = DIRECTION('',(0.,0.,1.)); +#65541 = ORIENTED_EDGE('',*,*,#64154,.F.); +#65542 = ORIENTED_EDGE('',*,*,#65536,.F.); +#65543 = CYLINDRICAL_SURFACE('',#65544,0.475); +#65544 = AXIS2_PLACEMENT_3D('',#65545,#65546,#65547); +#65545 = CARTESIAN_POINT('',(104.5,-103.4,-4.6E-02)); +#65546 = DIRECTION('',(-0.,-0.,-1.)); +#65547 = DIRECTION('',(-0.,-1.,0.)); +#65548 = ADVANCED_FACE('',(#65549),#65560,.F.); +#65549 = FACE_BOUND('',#65550,.T.); +#65550 = EDGE_LOOP('',(#65551,#65552,#65558,#65559)); +#65551 = ORIENTED_EDGE('',*,*,#63167,.T.); +#65552 = ORIENTED_EDGE('',*,*,#65553,.T.); +#65553 = EDGE_CURVE('',#63168,#64166,#65554,.T.); +#65554 = LINE('',#65555,#65556); +#65555 = CARTESIAN_POINT('',(115.24,-109.14,-4.6E-02)); +#65556 = VECTOR('',#65557,1.); +#65557 = DIRECTION('',(0.,0.,1.)); +#65558 = ORIENTED_EDGE('',*,*,#64165,.F.); +#65559 = ORIENTED_EDGE('',*,*,#65553,.F.); +#65560 = CYLINDRICAL_SURFACE('',#65561,1.6); +#65561 = AXIS2_PLACEMENT_3D('',#65562,#65563,#65564); +#65562 = CARTESIAN_POINT('',(115.24,-107.54,-4.6E-02)); +#65563 = DIRECTION('',(-0.,-0.,-1.)); +#65564 = DIRECTION('',(-8.881784197001E-15,-1.,0.)); +#65565 = ADVANCED_FACE('',(#65566),#65577,.F.); +#65566 = FACE_BOUND('',#65567,.T.); +#65567 = EDGE_LOOP('',(#65568,#65569,#65575,#65576)); +#65568 = ORIENTED_EDGE('',*,*,#63178,.T.); +#65569 = ORIENTED_EDGE('',*,*,#65570,.T.); +#65570 = EDGE_CURVE('',#63179,#64177,#65571,.T.); +#65571 = LINE('',#65572,#65573); +#65572 = CARTESIAN_POINT('',(120.32,-102.3,-4.6E-02)); +#65573 = VECTOR('',#65574,1.); +#65574 = DIRECTION('',(0.,0.,1.)); +#65575 = ORIENTED_EDGE('',*,*,#64176,.F.); +#65576 = ORIENTED_EDGE('',*,*,#65570,.F.); +#65577 = CYLINDRICAL_SURFACE('',#65578,0.4); +#65578 = AXIS2_PLACEMENT_3D('',#65579,#65580,#65581); +#65579 = CARTESIAN_POINT('',(120.32,-101.9,-4.6E-02)); +#65580 = DIRECTION('',(-0.,-0.,-1.)); +#65581 = DIRECTION('',(-0.,-1.,0.)); +#65582 = ADVANCED_FACE('',(#65583),#65594,.F.); +#65583 = FACE_BOUND('',#65584,.T.); +#65584 = EDGE_LOOP('',(#65585,#65586,#65592,#65593)); +#65585 = ORIENTED_EDGE('',*,*,#63189,.T.); +#65586 = ORIENTED_EDGE('',*,*,#65587,.T.); +#65587 = EDGE_CURVE('',#63190,#64188,#65588,.T.); +#65588 = LINE('',#65589,#65590); +#65589 = CARTESIAN_POINT('',(122.86,-115.,-4.6E-02)); +#65590 = VECTOR('',#65591,1.); +#65591 = DIRECTION('',(0.,0.,1.)); +#65592 = ORIENTED_EDGE('',*,*,#64187,.F.); +#65593 = ORIENTED_EDGE('',*,*,#65587,.F.); +#65594 = CYLINDRICAL_SURFACE('',#65595,0.4); +#65595 = AXIS2_PLACEMENT_3D('',#65596,#65597,#65598); +#65596 = CARTESIAN_POINT('',(122.86,-114.6,-4.6E-02)); +#65597 = DIRECTION('',(-0.,-0.,-1.)); +#65598 = DIRECTION('',(-0.,-1.,0.)); +#65599 = ADVANCED_FACE('',(#65600),#65611,.F.); +#65600 = FACE_BOUND('',#65601,.T.); +#65601 = EDGE_LOOP('',(#65602,#65603,#65609,#65610)); +#65602 = ORIENTED_EDGE('',*,*,#63200,.T.); +#65603 = ORIENTED_EDGE('',*,*,#65604,.T.); +#65604 = EDGE_CURVE('',#63201,#64199,#65605,.T.); +#65605 = LINE('',#65606,#65607); +#65606 = CARTESIAN_POINT('',(125.4,-115.,-4.6E-02)); +#65607 = VECTOR('',#65608,1.); +#65608 = DIRECTION('',(0.,0.,1.)); +#65609 = ORIENTED_EDGE('',*,*,#64198,.F.); +#65610 = ORIENTED_EDGE('',*,*,#65604,.F.); +#65611 = CYLINDRICAL_SURFACE('',#65612,0.4); +#65612 = AXIS2_PLACEMENT_3D('',#65613,#65614,#65615); +#65613 = CARTESIAN_POINT('',(125.4,-114.6,-4.6E-02)); +#65614 = DIRECTION('',(-0.,-0.,-1.)); +#65615 = DIRECTION('',(-0.,-1.,0.)); +#65616 = ADVANCED_FACE('',(#65617),#65628,.F.); +#65617 = FACE_BOUND('',#65618,.T.); +#65618 = EDGE_LOOP('',(#65619,#65620,#65626,#65627)); +#65619 = ORIENTED_EDGE('',*,*,#63211,.T.); +#65620 = ORIENTED_EDGE('',*,*,#65621,.T.); +#65621 = EDGE_CURVE('',#63212,#64210,#65622,.T.); +#65622 = LINE('',#65623,#65624); +#65623 = CARTESIAN_POINT('',(127.94,-115.,-4.6E-02)); +#65624 = VECTOR('',#65625,1.); +#65625 = DIRECTION('',(0.,0.,1.)); +#65626 = ORIENTED_EDGE('',*,*,#64209,.F.); +#65627 = ORIENTED_EDGE('',*,*,#65621,.F.); +#65628 = CYLINDRICAL_SURFACE('',#65629,0.4); +#65629 = AXIS2_PLACEMENT_3D('',#65630,#65631,#65632); +#65630 = CARTESIAN_POINT('',(127.94,-114.6,-4.6E-02)); +#65631 = DIRECTION('',(-0.,-0.,-1.)); +#65632 = DIRECTION('',(-0.,-1.,0.)); +#65633 = ADVANCED_FACE('',(#65634),#65645,.F.); +#65634 = FACE_BOUND('',#65635,.T.); +#65635 = EDGE_LOOP('',(#65636,#65637,#65643,#65644)); +#65636 = ORIENTED_EDGE('',*,*,#63222,.T.); +#65637 = ORIENTED_EDGE('',*,*,#65638,.T.); +#65638 = EDGE_CURVE('',#63223,#64221,#65639,.T.); +#65639 = LINE('',#65640,#65641); +#65640 = CARTESIAN_POINT('',(130.48,-115.,-4.6E-02)); +#65641 = VECTOR('',#65642,1.); +#65642 = DIRECTION('',(0.,0.,1.)); +#65643 = ORIENTED_EDGE('',*,*,#64220,.F.); +#65644 = ORIENTED_EDGE('',*,*,#65638,.F.); +#65645 = CYLINDRICAL_SURFACE('',#65646,0.4); +#65646 = AXIS2_PLACEMENT_3D('',#65647,#65648,#65649); +#65647 = CARTESIAN_POINT('',(130.48,-114.6,-4.6E-02)); +#65648 = DIRECTION('',(-0.,-0.,-1.)); +#65649 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#65650 = ADVANCED_FACE('',(#65651),#65662,.F.); +#65651 = FACE_BOUND('',#65652,.T.); +#65652 = EDGE_LOOP('',(#65653,#65654,#65660,#65661)); +#65653 = ORIENTED_EDGE('',*,*,#63233,.T.); +#65654 = ORIENTED_EDGE('',*,*,#65655,.T.); +#65655 = EDGE_CURVE('',#63234,#64232,#65656,.T.); +#65656 = LINE('',#65657,#65658); +#65657 = CARTESIAN_POINT('',(133.02,-115.,-4.6E-02)); +#65658 = VECTOR('',#65659,1.); +#65659 = DIRECTION('',(0.,0.,1.)); +#65660 = ORIENTED_EDGE('',*,*,#64231,.F.); +#65661 = ORIENTED_EDGE('',*,*,#65655,.F.); +#65662 = CYLINDRICAL_SURFACE('',#65663,0.4); +#65663 = AXIS2_PLACEMENT_3D('',#65664,#65665,#65666); +#65664 = CARTESIAN_POINT('',(133.02,-114.6,-4.6E-02)); +#65665 = DIRECTION('',(-0.,0.,-1.)); +#65666 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#65667 = ADVANCED_FACE('',(#65668),#65679,.F.); +#65668 = FACE_BOUND('',#65669,.T.); +#65669 = EDGE_LOOP('',(#65670,#65671,#65677,#65678)); +#65670 = ORIENTED_EDGE('',*,*,#63244,.T.); +#65671 = ORIENTED_EDGE('',*,*,#65672,.T.); +#65672 = EDGE_CURVE('',#63245,#64243,#65673,.T.); +#65673 = LINE('',#65674,#65675); +#65674 = CARTESIAN_POINT('',(135.56,-115.,-4.6E-02)); +#65675 = VECTOR('',#65676,1.); +#65676 = DIRECTION('',(0.,0.,1.)); +#65677 = ORIENTED_EDGE('',*,*,#64242,.F.); +#65678 = ORIENTED_EDGE('',*,*,#65672,.F.); +#65679 = CYLINDRICAL_SURFACE('',#65680,0.4); +#65680 = AXIS2_PLACEMENT_3D('',#65681,#65682,#65683); +#65681 = CARTESIAN_POINT('',(135.56,-114.6,-4.6E-02)); +#65682 = DIRECTION('',(-0.,-0.,-1.)); +#65683 = DIRECTION('',(-0.,-1.,0.)); +#65684 = ADVANCED_FACE('',(#65685),#65696,.F.); +#65685 = FACE_BOUND('',#65686,.T.); +#65686 = EDGE_LOOP('',(#65687,#65688,#65694,#65695)); +#65687 = ORIENTED_EDGE('',*,*,#63255,.T.); +#65688 = ORIENTED_EDGE('',*,*,#65689,.T.); +#65689 = EDGE_CURVE('',#63256,#64254,#65690,.T.); +#65690 = LINE('',#65691,#65692); +#65691 = CARTESIAN_POINT('',(138.1,-115.,-4.6E-02)); +#65692 = VECTOR('',#65693,1.); +#65693 = DIRECTION('',(0.,0.,1.)); +#65694 = ORIENTED_EDGE('',*,*,#64253,.F.); +#65695 = ORIENTED_EDGE('',*,*,#65689,.F.); +#65696 = CYLINDRICAL_SURFACE('',#65697,0.4); +#65697 = AXIS2_PLACEMENT_3D('',#65698,#65699,#65700); +#65698 = CARTESIAN_POINT('',(138.1,-114.6,-4.6E-02)); +#65699 = DIRECTION('',(-0.,-0.,-1.)); +#65700 = DIRECTION('',(-0.,-1.,0.)); +#65701 = ADVANCED_FACE('',(#65702),#65713,.F.); +#65702 = FACE_BOUND('',#65703,.T.); +#65703 = EDGE_LOOP('',(#65704,#65705,#65711,#65712)); +#65704 = ORIENTED_EDGE('',*,*,#63266,.T.); +#65705 = ORIENTED_EDGE('',*,*,#65706,.T.); +#65706 = EDGE_CURVE('',#63267,#64265,#65707,.T.); +#65707 = LINE('',#65708,#65709); +#65708 = CARTESIAN_POINT('',(122.86,-102.3,-4.6E-02)); +#65709 = VECTOR('',#65710,1.); +#65710 = DIRECTION('',(0.,0.,1.)); +#65711 = ORIENTED_EDGE('',*,*,#64264,.F.); +#65712 = ORIENTED_EDGE('',*,*,#65706,.F.); +#65713 = CYLINDRICAL_SURFACE('',#65714,0.4); +#65714 = AXIS2_PLACEMENT_3D('',#65715,#65716,#65717); +#65715 = CARTESIAN_POINT('',(122.86,-101.9,-4.6E-02)); +#65716 = DIRECTION('',(-0.,-0.,-1.)); +#65717 = DIRECTION('',(-0.,-1.,0.)); +#65718 = ADVANCED_FACE('',(#65719),#65730,.F.); +#65719 = FACE_BOUND('',#65720,.T.); +#65720 = EDGE_LOOP('',(#65721,#65722,#65728,#65729)); +#65721 = ORIENTED_EDGE('',*,*,#63277,.T.); +#65722 = ORIENTED_EDGE('',*,*,#65723,.T.); +#65723 = EDGE_CURVE('',#63278,#64276,#65724,.T.); +#65724 = LINE('',#65725,#65726); +#65725 = CARTESIAN_POINT('',(125.4,-102.3,-4.6E-02)); +#65726 = VECTOR('',#65727,1.); +#65727 = DIRECTION('',(0.,0.,1.)); +#65728 = ORIENTED_EDGE('',*,*,#64275,.F.); +#65729 = ORIENTED_EDGE('',*,*,#65723,.F.); +#65730 = CYLINDRICAL_SURFACE('',#65731,0.4); +#65731 = AXIS2_PLACEMENT_3D('',#65732,#65733,#65734); +#65732 = CARTESIAN_POINT('',(125.4,-101.9,-4.6E-02)); +#65733 = DIRECTION('',(-0.,-0.,-1.)); +#65734 = DIRECTION('',(-0.,-1.,0.)); +#65735 = ADVANCED_FACE('',(#65736),#65747,.F.); +#65736 = FACE_BOUND('',#65737,.T.); +#65737 = EDGE_LOOP('',(#65738,#65739,#65745,#65746)); +#65738 = ORIENTED_EDGE('',*,*,#63288,.T.); +#65739 = ORIENTED_EDGE('',*,*,#65740,.T.); +#65740 = EDGE_CURVE('',#63289,#64287,#65741,.T.); +#65741 = LINE('',#65742,#65743); +#65742 = CARTESIAN_POINT('',(127.94,-102.3,-4.6E-02)); +#65743 = VECTOR('',#65744,1.); +#65744 = DIRECTION('',(0.,0.,1.)); +#65745 = ORIENTED_EDGE('',*,*,#64286,.F.); +#65746 = ORIENTED_EDGE('',*,*,#65740,.F.); +#65747 = CYLINDRICAL_SURFACE('',#65748,0.4); +#65748 = AXIS2_PLACEMENT_3D('',#65749,#65750,#65751); +#65749 = CARTESIAN_POINT('',(127.94,-101.9,-4.6E-02)); +#65750 = DIRECTION('',(-0.,-0.,-1.)); +#65751 = DIRECTION('',(-0.,-1.,0.)); +#65752 = ADVANCED_FACE('',(#65753),#65764,.F.); +#65753 = FACE_BOUND('',#65754,.T.); +#65754 = EDGE_LOOP('',(#65755,#65756,#65762,#65763)); +#65755 = ORIENTED_EDGE('',*,*,#63299,.T.); +#65756 = ORIENTED_EDGE('',*,*,#65757,.T.); +#65757 = EDGE_CURVE('',#63300,#64298,#65758,.T.); +#65758 = LINE('',#65759,#65760); +#65759 = CARTESIAN_POINT('',(130.48,-102.3,-4.6E-02)); +#65760 = VECTOR('',#65761,1.); +#65761 = DIRECTION('',(0.,0.,1.)); +#65762 = ORIENTED_EDGE('',*,*,#64297,.F.); +#65763 = ORIENTED_EDGE('',*,*,#65757,.F.); +#65764 = CYLINDRICAL_SURFACE('',#65765,0.4); +#65765 = AXIS2_PLACEMENT_3D('',#65766,#65767,#65768); +#65766 = CARTESIAN_POINT('',(130.48,-101.9,-4.6E-02)); +#65767 = DIRECTION('',(-0.,-0.,-1.)); +#65768 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#65769 = ADVANCED_FACE('',(#65770),#65781,.F.); +#65770 = FACE_BOUND('',#65771,.T.); +#65771 = EDGE_LOOP('',(#65772,#65773,#65779,#65780)); +#65772 = ORIENTED_EDGE('',*,*,#63310,.T.); +#65773 = ORIENTED_EDGE('',*,*,#65774,.T.); +#65774 = EDGE_CURVE('',#63311,#64309,#65775,.T.); +#65775 = LINE('',#65776,#65777); +#65776 = CARTESIAN_POINT('',(133.02,-102.3,-4.6E-02)); +#65777 = VECTOR('',#65778,1.); +#65778 = DIRECTION('',(0.,0.,1.)); +#65779 = ORIENTED_EDGE('',*,*,#64308,.F.); +#65780 = ORIENTED_EDGE('',*,*,#65774,.F.); +#65781 = CYLINDRICAL_SURFACE('',#65782,0.4); +#65782 = AXIS2_PLACEMENT_3D('',#65783,#65784,#65785); +#65783 = CARTESIAN_POINT('',(133.02,-101.9,-4.6E-02)); +#65784 = DIRECTION('',(-0.,0.,-1.)); +#65785 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#65786 = ADVANCED_FACE('',(#65787),#65798,.F.); +#65787 = FACE_BOUND('',#65788,.T.); +#65788 = EDGE_LOOP('',(#65789,#65790,#65796,#65797)); +#65789 = ORIENTED_EDGE('',*,*,#63321,.T.); +#65790 = ORIENTED_EDGE('',*,*,#65791,.T.); +#65791 = EDGE_CURVE('',#63322,#64320,#65792,.T.); +#65792 = LINE('',#65793,#65794); +#65793 = CARTESIAN_POINT('',(135.56,-102.3,-4.6E-02)); +#65794 = VECTOR('',#65795,1.); +#65795 = DIRECTION('',(0.,0.,1.)); +#65796 = ORIENTED_EDGE('',*,*,#64319,.F.); +#65797 = ORIENTED_EDGE('',*,*,#65791,.F.); +#65798 = CYLINDRICAL_SURFACE('',#65799,0.4); +#65799 = AXIS2_PLACEMENT_3D('',#65800,#65801,#65802); +#65800 = CARTESIAN_POINT('',(135.56,-101.9,-4.6E-02)); +#65801 = DIRECTION('',(-0.,-0.,-1.)); +#65802 = DIRECTION('',(-0.,-1.,0.)); +#65803 = ADVANCED_FACE('',(#65804),#65815,.F.); +#65804 = FACE_BOUND('',#65805,.T.); +#65805 = EDGE_LOOP('',(#65806,#65807,#65813,#65814)); +#65806 = ORIENTED_EDGE('',*,*,#63332,.T.); +#65807 = ORIENTED_EDGE('',*,*,#65808,.T.); +#65808 = EDGE_CURVE('',#63333,#64331,#65809,.T.); +#65809 = LINE('',#65810,#65811); +#65810 = CARTESIAN_POINT('',(138.1,-102.3,-4.6E-02)); +#65811 = VECTOR('',#65812,1.); +#65812 = DIRECTION('',(0.,0.,1.)); +#65813 = ORIENTED_EDGE('',*,*,#64330,.F.); +#65814 = ORIENTED_EDGE('',*,*,#65808,.F.); +#65815 = CYLINDRICAL_SURFACE('',#65816,0.4); +#65816 = AXIS2_PLACEMENT_3D('',#65817,#65818,#65819); +#65817 = CARTESIAN_POINT('',(138.1,-101.9,-4.6E-02)); +#65818 = DIRECTION('',(-0.,-0.,-1.)); +#65819 = DIRECTION('',(-0.,-1.,0.)); +#65820 = ADVANCED_FACE('',(#65821),#65832,.F.); +#65821 = FACE_BOUND('',#65822,.T.); +#65822 = EDGE_LOOP('',(#65823,#65824,#65830,#65831)); +#65823 = ORIENTED_EDGE('',*,*,#63343,.T.); +#65824 = ORIENTED_EDGE('',*,*,#65825,.T.); +#65825 = EDGE_CURVE('',#63344,#64342,#65826,.T.); +#65826 = LINE('',#65827,#65828); +#65827 = CARTESIAN_POINT('',(176.5,-130.075,-4.6E-02)); +#65828 = VECTOR('',#65829,1.); +#65829 = DIRECTION('',(0.,0.,1.)); +#65830 = ORIENTED_EDGE('',*,*,#64341,.F.); +#65831 = ORIENTED_EDGE('',*,*,#65825,.F.); +#65832 = CYLINDRICAL_SURFACE('',#65833,0.475); +#65833 = AXIS2_PLACEMENT_3D('',#65834,#65835,#65836); +#65834 = CARTESIAN_POINT('',(176.5,-129.6,-4.6E-02)); +#65835 = DIRECTION('',(-0.,-0.,-1.)); +#65836 = DIRECTION('',(-0.,-1.,0.)); +#65837 = ADVANCED_FACE('',(#65838),#65849,.F.); +#65838 = FACE_BOUND('',#65839,.T.); +#65839 = EDGE_LOOP('',(#65840,#65841,#65847,#65848)); +#65840 = ORIENTED_EDGE('',*,*,#63354,.T.); +#65841 = ORIENTED_EDGE('',*,*,#65842,.T.); +#65842 = EDGE_CURVE('',#63355,#64353,#65843,.T.); +#65843 = LINE('',#65844,#65845); +#65844 = CARTESIAN_POINT('',(176.5,-123.975,-4.6E-02)); +#65845 = VECTOR('',#65846,1.); +#65846 = DIRECTION('',(0.,0.,1.)); +#65847 = ORIENTED_EDGE('',*,*,#64352,.F.); +#65848 = ORIENTED_EDGE('',*,*,#65842,.F.); +#65849 = CYLINDRICAL_SURFACE('',#65850,0.475); +#65850 = AXIS2_PLACEMENT_3D('',#65851,#65852,#65853); +#65851 = CARTESIAN_POINT('',(176.5,-123.5,-4.6E-02)); +#65852 = DIRECTION('',(-0.,-0.,-1.)); +#65853 = DIRECTION('',(-0.,-1.,0.)); +#65854 = ADVANCED_FACE('',(#65855),#65866,.F.); +#65855 = FACE_BOUND('',#65856,.T.); +#65856 = EDGE_LOOP('',(#65857,#65858,#65864,#65865)); +#65857 = ORIENTED_EDGE('',*,*,#63365,.T.); +#65858 = ORIENTED_EDGE('',*,*,#65859,.T.); +#65859 = EDGE_CURVE('',#63366,#64364,#65860,.T.); +#65860 = LINE('',#65861,#65862); +#65861 = CARTESIAN_POINT('',(166.04,-124.38,-4.6E-02)); +#65862 = VECTOR('',#65863,1.); +#65863 = DIRECTION('',(0.,0.,1.)); +#65864 = ORIENTED_EDGE('',*,*,#64363,.F.); +#65865 = ORIENTED_EDGE('',*,*,#65859,.F.); +#65866 = CYLINDRICAL_SURFACE('',#65867,1.6); +#65867 = AXIS2_PLACEMENT_3D('',#65868,#65869,#65870); +#65868 = CARTESIAN_POINT('',(166.04,-122.78,-4.6E-02)); +#65869 = DIRECTION('',(-0.,-0.,-1.)); +#65870 = DIRECTION('',(-0.,-1.,0.)); +#65871 = ADVANCED_FACE('',(#65872),#65883,.F.); +#65872 = FACE_BOUND('',#65873,.T.); +#65873 = EDGE_LOOP('',(#65874,#65875,#65881,#65882)); +#65874 = ORIENTED_EDGE('',*,*,#63376,.T.); +#65875 = ORIENTED_EDGE('',*,*,#65876,.T.); +#65876 = EDGE_CURVE('',#63377,#64375,#65877,.T.); +#65877 = LINE('',#65878,#65879); +#65878 = CARTESIAN_POINT('',(176.5,-121.475,-4.6E-02)); +#65879 = VECTOR('',#65880,1.); +#65880 = DIRECTION('',(0.,0.,1.)); +#65881 = ORIENTED_EDGE('',*,*,#64374,.F.); +#65882 = ORIENTED_EDGE('',*,*,#65876,.F.); +#65883 = CYLINDRICAL_SURFACE('',#65884,0.475); +#65884 = AXIS2_PLACEMENT_3D('',#65885,#65886,#65887); +#65885 = CARTESIAN_POINT('',(176.5,-121.,-4.6E-02)); +#65886 = DIRECTION('',(-0.,-0.,-1.)); +#65887 = DIRECTION('',(-0.,-1.,0.)); +#65888 = ADVANCED_FACE('',(#65889),#65900,.F.); +#65889 = FACE_BOUND('',#65890,.T.); +#65890 = EDGE_LOOP('',(#65891,#65892,#65898,#65899)); +#65891 = ORIENTED_EDGE('',*,*,#63387,.T.); +#65892 = ORIENTED_EDGE('',*,*,#65893,.T.); +#65893 = EDGE_CURVE('',#63388,#64386,#65894,.T.); +#65894 = LINE('',#65895,#65896); +#65895 = CARTESIAN_POINT('',(176.5,-118.975,-4.6E-02)); +#65896 = VECTOR('',#65897,1.); +#65897 = DIRECTION('',(0.,0.,1.)); +#65898 = ORIENTED_EDGE('',*,*,#64385,.F.); +#65899 = ORIENTED_EDGE('',*,*,#65893,.F.); +#65900 = CYLINDRICAL_SURFACE('',#65901,0.475); +#65901 = AXIS2_PLACEMENT_3D('',#65902,#65903,#65904); +#65902 = CARTESIAN_POINT('',(176.5,-118.5,-4.6E-02)); +#65903 = DIRECTION('',(-0.,-0.,-1.)); +#65904 = DIRECTION('',(-0.,-1.,0.)); +#65905 = ADVANCED_FACE('',(#65906),#65917,.F.); +#65906 = FACE_BOUND('',#65907,.T.); +#65907 = EDGE_LOOP('',(#65908,#65909,#65915,#65916)); +#65908 = ORIENTED_EDGE('',*,*,#63398,.T.); +#65909 = ORIENTED_EDGE('',*,*,#65910,.T.); +#65910 = EDGE_CURVE('',#63399,#64397,#65911,.T.); +#65911 = LINE('',#65912,#65913); +#65912 = CARTESIAN_POINT('',(141.32,-115.,-4.6E-02)); +#65913 = VECTOR('',#65914,1.); +#65914 = DIRECTION('',(0.,0.,1.)); +#65915 = ORIENTED_EDGE('',*,*,#64396,.F.); +#65916 = ORIENTED_EDGE('',*,*,#65910,.F.); +#65917 = CYLINDRICAL_SURFACE('',#65918,0.4); +#65918 = AXIS2_PLACEMENT_3D('',#65919,#65920,#65921); +#65919 = CARTESIAN_POINT('',(141.32,-114.6,-4.6E-02)); +#65920 = DIRECTION('',(-0.,-0.,-1.)); +#65921 = DIRECTION('',(-0.,-1.,0.)); +#65922 = ADVANCED_FACE('',(#65923),#65934,.F.); +#65923 = FACE_BOUND('',#65924,.T.); +#65924 = EDGE_LOOP('',(#65925,#65926,#65932,#65933)); +#65925 = ORIENTED_EDGE('',*,*,#63409,.T.); +#65926 = ORIENTED_EDGE('',*,*,#65927,.T.); +#65927 = EDGE_CURVE('',#63410,#64408,#65928,.T.); +#65928 = LINE('',#65929,#65930); +#65929 = CARTESIAN_POINT('',(143.86,-115.,-4.6E-02)); +#65930 = VECTOR('',#65931,1.); +#65931 = DIRECTION('',(0.,0.,1.)); +#65932 = ORIENTED_EDGE('',*,*,#64407,.F.); +#65933 = ORIENTED_EDGE('',*,*,#65927,.F.); +#65934 = CYLINDRICAL_SURFACE('',#65935,0.4); +#65935 = AXIS2_PLACEMENT_3D('',#65936,#65937,#65938); +#65936 = CARTESIAN_POINT('',(143.86,-114.6,-4.6E-02)); +#65937 = DIRECTION('',(-0.,-0.,-1.)); +#65938 = DIRECTION('',(-0.,-1.,0.)); +#65939 = ADVANCED_FACE('',(#65940),#65951,.F.); +#65940 = FACE_BOUND('',#65941,.T.); +#65941 = EDGE_LOOP('',(#65942,#65943,#65949,#65950)); +#65942 = ORIENTED_EDGE('',*,*,#63420,.T.); +#65943 = ORIENTED_EDGE('',*,*,#65944,.T.); +#65944 = EDGE_CURVE('',#63421,#64419,#65945,.T.); +#65945 = LINE('',#65946,#65947); +#65946 = CARTESIAN_POINT('',(146.4,-115.,-4.6E-02)); +#65947 = VECTOR('',#65948,1.); +#65948 = DIRECTION('',(0.,0.,1.)); +#65949 = ORIENTED_EDGE('',*,*,#64418,.F.); +#65950 = ORIENTED_EDGE('',*,*,#65944,.F.); +#65951 = CYLINDRICAL_SURFACE('',#65952,0.4); +#65952 = AXIS2_PLACEMENT_3D('',#65953,#65954,#65955); +#65953 = CARTESIAN_POINT('',(146.4,-114.6,-4.6E-02)); +#65954 = DIRECTION('',(-0.,-0.,-1.)); +#65955 = DIRECTION('',(-0.,-1.,0.)); +#65956 = ADVANCED_FACE('',(#65957),#65968,.F.); +#65957 = FACE_BOUND('',#65958,.T.); +#65958 = EDGE_LOOP('',(#65959,#65960,#65966,#65967)); +#65959 = ORIENTED_EDGE('',*,*,#63431,.T.); +#65960 = ORIENTED_EDGE('',*,*,#65961,.T.); +#65961 = EDGE_CURVE('',#63432,#64430,#65962,.T.); +#65962 = LINE('',#65963,#65964); +#65963 = CARTESIAN_POINT('',(148.94,-115.,-4.6E-02)); +#65964 = VECTOR('',#65965,1.); +#65965 = DIRECTION('',(0.,0.,1.)); +#65966 = ORIENTED_EDGE('',*,*,#64429,.F.); +#65967 = ORIENTED_EDGE('',*,*,#65961,.F.); +#65968 = CYLINDRICAL_SURFACE('',#65969,0.4); +#65969 = AXIS2_PLACEMENT_3D('',#65970,#65971,#65972); +#65970 = CARTESIAN_POINT('',(148.94,-114.6,-4.6E-02)); +#65971 = DIRECTION('',(-0.,-0.,-1.)); +#65972 = DIRECTION('',(-0.,-1.,0.)); +#65973 = ADVANCED_FACE('',(#65974),#65985,.F.); +#65974 = FACE_BOUND('',#65975,.T.); +#65975 = EDGE_LOOP('',(#65976,#65977,#65983,#65984)); +#65976 = ORIENTED_EDGE('',*,*,#63442,.T.); +#65977 = ORIENTED_EDGE('',*,*,#65978,.T.); +#65978 = EDGE_CURVE('',#63443,#64441,#65979,.T.); +#65979 = LINE('',#65980,#65981); +#65980 = CARTESIAN_POINT('',(151.48,-115.,-4.6E-02)); +#65981 = VECTOR('',#65982,1.); +#65982 = DIRECTION('',(0.,0.,1.)); +#65983 = ORIENTED_EDGE('',*,*,#64440,.F.); +#65984 = ORIENTED_EDGE('',*,*,#65978,.F.); +#65985 = CYLINDRICAL_SURFACE('',#65986,0.4); +#65986 = AXIS2_PLACEMENT_3D('',#65987,#65988,#65989); +#65987 = CARTESIAN_POINT('',(151.48,-114.6,-4.6E-02)); +#65988 = DIRECTION('',(-0.,-0.,-1.)); +#65989 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#65990 = ADVANCED_FACE('',(#65991),#66002,.F.); +#65991 = FACE_BOUND('',#65992,.T.); +#65992 = EDGE_LOOP('',(#65993,#65994,#66000,#66001)); +#65993 = ORIENTED_EDGE('',*,*,#63453,.T.); +#65994 = ORIENTED_EDGE('',*,*,#65995,.T.); +#65995 = EDGE_CURVE('',#63454,#64452,#65996,.T.); +#65996 = LINE('',#65997,#65998); +#65997 = CARTESIAN_POINT('',(154.02,-115.,-4.6E-02)); +#65998 = VECTOR('',#65999,1.); +#65999 = DIRECTION('',(0.,0.,1.)); +#66000 = ORIENTED_EDGE('',*,*,#64451,.F.); +#66001 = ORIENTED_EDGE('',*,*,#65995,.F.); +#66002 = CYLINDRICAL_SURFACE('',#66003,0.4); +#66003 = AXIS2_PLACEMENT_3D('',#66004,#66005,#66006); +#66004 = CARTESIAN_POINT('',(154.02,-114.6,-4.6E-02)); +#66005 = DIRECTION('',(-0.,0.,-1.)); +#66006 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#66007 = ADVANCED_FACE('',(#66008),#66019,.F.); +#66008 = FACE_BOUND('',#66009,.T.); +#66009 = EDGE_LOOP('',(#66010,#66011,#66017,#66018)); +#66010 = ORIENTED_EDGE('',*,*,#63464,.T.); +#66011 = ORIENTED_EDGE('',*,*,#66012,.T.); +#66012 = EDGE_CURVE('',#63465,#64463,#66013,.T.); +#66013 = LINE('',#66014,#66015); +#66014 = CARTESIAN_POINT('',(156.56,-115.,-4.6E-02)); +#66015 = VECTOR('',#66016,1.); +#66016 = DIRECTION('',(0.,0.,1.)); +#66017 = ORIENTED_EDGE('',*,*,#64462,.F.); +#66018 = ORIENTED_EDGE('',*,*,#66012,.F.); +#66019 = CYLINDRICAL_SURFACE('',#66020,0.4); +#66020 = AXIS2_PLACEMENT_3D('',#66021,#66022,#66023); +#66021 = CARTESIAN_POINT('',(156.56,-114.6,-4.6E-02)); +#66022 = DIRECTION('',(-0.,-0.,-1.)); +#66023 = DIRECTION('',(-0.,-1.,0.)); +#66024 = ADVANCED_FACE('',(#66025),#66036,.F.); +#66025 = FACE_BOUND('',#66026,.T.); +#66026 = EDGE_LOOP('',(#66027,#66028,#66034,#66035)); +#66027 = ORIENTED_EDGE('',*,*,#63475,.T.); +#66028 = ORIENTED_EDGE('',*,*,#66029,.T.); +#66029 = EDGE_CURVE('',#63476,#64474,#66030,.T.); +#66030 = LINE('',#66031,#66032); +#66031 = CARTESIAN_POINT('',(141.32,-102.3,-4.6E-02)); +#66032 = VECTOR('',#66033,1.); +#66033 = DIRECTION('',(0.,0.,1.)); +#66034 = ORIENTED_EDGE('',*,*,#64473,.F.); +#66035 = ORIENTED_EDGE('',*,*,#66029,.F.); +#66036 = CYLINDRICAL_SURFACE('',#66037,0.4); +#66037 = AXIS2_PLACEMENT_3D('',#66038,#66039,#66040); +#66038 = CARTESIAN_POINT('',(141.32,-101.9,-4.6E-02)); +#66039 = DIRECTION('',(-0.,-0.,-1.)); +#66040 = DIRECTION('',(-0.,-1.,0.)); +#66041 = ADVANCED_FACE('',(#66042),#66053,.F.); +#66042 = FACE_BOUND('',#66043,.T.); +#66043 = EDGE_LOOP('',(#66044,#66045,#66051,#66052)); +#66044 = ORIENTED_EDGE('',*,*,#63486,.T.); +#66045 = ORIENTED_EDGE('',*,*,#66046,.T.); +#66046 = EDGE_CURVE('',#63487,#64485,#66047,.T.); +#66047 = LINE('',#66048,#66049); +#66048 = CARTESIAN_POINT('',(143.86,-102.3,-4.6E-02)); +#66049 = VECTOR('',#66050,1.); +#66050 = DIRECTION('',(0.,0.,1.)); +#66051 = ORIENTED_EDGE('',*,*,#64484,.F.); +#66052 = ORIENTED_EDGE('',*,*,#66046,.F.); +#66053 = CYLINDRICAL_SURFACE('',#66054,0.4); +#66054 = AXIS2_PLACEMENT_3D('',#66055,#66056,#66057); +#66055 = CARTESIAN_POINT('',(143.86,-101.9,-4.6E-02)); +#66056 = DIRECTION('',(-0.,-0.,-1.)); +#66057 = DIRECTION('',(-0.,-1.,0.)); +#66058 = ADVANCED_FACE('',(#66059),#66070,.F.); +#66059 = FACE_BOUND('',#66060,.T.); +#66060 = EDGE_LOOP('',(#66061,#66062,#66068,#66069)); +#66061 = ORIENTED_EDGE('',*,*,#63497,.T.); +#66062 = ORIENTED_EDGE('',*,*,#66063,.T.); +#66063 = EDGE_CURVE('',#63498,#64496,#66064,.T.); +#66064 = LINE('',#66065,#66066); +#66065 = CARTESIAN_POINT('',(146.4,-102.3,-4.6E-02)); +#66066 = VECTOR('',#66067,1.); +#66067 = DIRECTION('',(0.,0.,1.)); +#66068 = ORIENTED_EDGE('',*,*,#64495,.F.); +#66069 = ORIENTED_EDGE('',*,*,#66063,.F.); +#66070 = CYLINDRICAL_SURFACE('',#66071,0.4); +#66071 = AXIS2_PLACEMENT_3D('',#66072,#66073,#66074); +#66072 = CARTESIAN_POINT('',(146.4,-101.9,-4.6E-02)); +#66073 = DIRECTION('',(-0.,-0.,-1.)); +#66074 = DIRECTION('',(-0.,-1.,0.)); +#66075 = ADVANCED_FACE('',(#66076),#66087,.F.); +#66076 = FACE_BOUND('',#66077,.T.); +#66077 = EDGE_LOOP('',(#66078,#66079,#66085,#66086)); +#66078 = ORIENTED_EDGE('',*,*,#63508,.T.); +#66079 = ORIENTED_EDGE('',*,*,#66080,.T.); +#66080 = EDGE_CURVE('',#63509,#64507,#66081,.T.); +#66081 = LINE('',#66082,#66083); +#66082 = CARTESIAN_POINT('',(148.94,-102.3,-4.6E-02)); +#66083 = VECTOR('',#66084,1.); +#66084 = DIRECTION('',(0.,0.,1.)); +#66085 = ORIENTED_EDGE('',*,*,#64506,.F.); +#66086 = ORIENTED_EDGE('',*,*,#66080,.F.); +#66087 = CYLINDRICAL_SURFACE('',#66088,0.4); +#66088 = AXIS2_PLACEMENT_3D('',#66089,#66090,#66091); +#66089 = CARTESIAN_POINT('',(148.94,-101.9,-4.6E-02)); +#66090 = DIRECTION('',(-0.,-0.,-1.)); +#66091 = DIRECTION('',(-0.,-1.,0.)); +#66092 = ADVANCED_FACE('',(#66093),#66104,.F.); +#66093 = FACE_BOUND('',#66094,.T.); +#66094 = EDGE_LOOP('',(#66095,#66096,#66102,#66103)); +#66095 = ORIENTED_EDGE('',*,*,#63519,.T.); +#66096 = ORIENTED_EDGE('',*,*,#66097,.T.); +#66097 = EDGE_CURVE('',#63520,#64518,#66098,.T.); +#66098 = LINE('',#66099,#66100); +#66099 = CARTESIAN_POINT('',(151.48,-102.3,-4.6E-02)); +#66100 = VECTOR('',#66101,1.); +#66101 = DIRECTION('',(0.,0.,1.)); +#66102 = ORIENTED_EDGE('',*,*,#64517,.F.); +#66103 = ORIENTED_EDGE('',*,*,#66097,.F.); +#66104 = CYLINDRICAL_SURFACE('',#66105,0.4); +#66105 = AXIS2_PLACEMENT_3D('',#66106,#66107,#66108); +#66106 = CARTESIAN_POINT('',(151.48,-101.9,-4.6E-02)); +#66107 = DIRECTION('',(-0.,-0.,-1.)); +#66108 = DIRECTION('',(-7.105427357601E-14,-1.,0.)); +#66109 = ADVANCED_FACE('',(#66110),#66121,.F.); +#66110 = FACE_BOUND('',#66111,.T.); +#66111 = EDGE_LOOP('',(#66112,#66113,#66119,#66120)); +#66112 = ORIENTED_EDGE('',*,*,#63530,.T.); +#66113 = ORIENTED_EDGE('',*,*,#66114,.T.); +#66114 = EDGE_CURVE('',#63531,#64529,#66115,.T.); +#66115 = LINE('',#66116,#66117); +#66116 = CARTESIAN_POINT('',(154.02,-102.3,-4.6E-02)); +#66117 = VECTOR('',#66118,1.); +#66118 = DIRECTION('',(0.,0.,1.)); +#66119 = ORIENTED_EDGE('',*,*,#64528,.F.); +#66120 = ORIENTED_EDGE('',*,*,#66114,.F.); +#66121 = CYLINDRICAL_SURFACE('',#66122,0.4); +#66122 = AXIS2_PLACEMENT_3D('',#66123,#66124,#66125); +#66123 = CARTESIAN_POINT('',(154.02,-101.9,-4.6E-02)); +#66124 = DIRECTION('',(-0.,0.,-1.)); +#66125 = DIRECTION('',(7.105427357601E-14,-1.,-0.)); +#66126 = ADVANCED_FACE('',(#66127),#66138,.F.); +#66127 = FACE_BOUND('',#66128,.T.); +#66128 = EDGE_LOOP('',(#66129,#66130,#66136,#66137)); +#66129 = ORIENTED_EDGE('',*,*,#63541,.T.); +#66130 = ORIENTED_EDGE('',*,*,#66131,.T.); +#66131 = EDGE_CURVE('',#63542,#64540,#66132,.T.); +#66132 = LINE('',#66133,#66134); +#66133 = CARTESIAN_POINT('',(156.56,-102.3,-4.6E-02)); +#66134 = VECTOR('',#66135,1.); +#66135 = DIRECTION('',(0.,0.,1.)); +#66136 = ORIENTED_EDGE('',*,*,#64539,.F.); +#66137 = ORIENTED_EDGE('',*,*,#66131,.F.); +#66138 = CYLINDRICAL_SURFACE('',#66139,0.4); +#66139 = AXIS2_PLACEMENT_3D('',#66140,#66141,#66142); +#66140 = CARTESIAN_POINT('',(156.56,-101.9,-4.6E-02)); +#66141 = DIRECTION('',(-0.,-0.,-1.)); +#66142 = DIRECTION('',(-0.,-1.,0.)); +#66143 = ADVANCED_FACE('',(#66144),#66155,.F.); +#66144 = FACE_BOUND('',#66145,.T.); +#66145 = EDGE_LOOP('',(#66146,#66147,#66153,#66154)); +#66146 = ORIENTED_EDGE('',*,*,#63552,.T.); +#66147 = ORIENTED_EDGE('',*,*,#66148,.T.); +#66148 = EDGE_CURVE('',#63553,#64551,#66149,.T.); +#66149 = LINE('',#66150,#66151); +#66150 = CARTESIAN_POINT('',(159.1,-115.,-4.6E-02)); +#66151 = VECTOR('',#66152,1.); +#66152 = DIRECTION('',(0.,0.,1.)); +#66153 = ORIENTED_EDGE('',*,*,#64550,.F.); +#66154 = ORIENTED_EDGE('',*,*,#66148,.F.); +#66155 = CYLINDRICAL_SURFACE('',#66156,0.4); +#66156 = AXIS2_PLACEMENT_3D('',#66157,#66158,#66159); +#66157 = CARTESIAN_POINT('',(159.1,-114.6,-4.6E-02)); +#66158 = DIRECTION('',(-0.,-0.,-1.)); +#66159 = DIRECTION('',(-0.,-1.,0.)); +#66160 = ADVANCED_FACE('',(#66161),#66172,.F.); +#66161 = FACE_BOUND('',#66162,.T.); +#66162 = EDGE_LOOP('',(#66163,#66164,#66170,#66171)); +#66163 = ORIENTED_EDGE('',*,*,#63563,.T.); +#66164 = ORIENTED_EDGE('',*,*,#66165,.T.); +#66165 = EDGE_CURVE('',#63564,#64562,#66166,.T.); +#66166 = LINE('',#66167,#66168); +#66167 = CARTESIAN_POINT('',(176.5,-111.375,-4.6E-02)); +#66168 = VECTOR('',#66169,1.); +#66169 = DIRECTION('',(0.,0.,1.)); +#66170 = ORIENTED_EDGE('',*,*,#64561,.F.); +#66171 = ORIENTED_EDGE('',*,*,#66165,.F.); +#66172 = CYLINDRICAL_SURFACE('',#66173,0.475); +#66173 = AXIS2_PLACEMENT_3D('',#66174,#66175,#66176); +#66174 = CARTESIAN_POINT('',(176.5,-110.9,-4.6E-02)); +#66175 = DIRECTION('',(-0.,-0.,-1.)); +#66176 = DIRECTION('',(-0.,-1.,0.)); +#66177 = ADVANCED_FACE('',(#66178),#66189,.F.); +#66178 = FACE_BOUND('',#66179,.T.); +#66179 = EDGE_LOOP('',(#66180,#66181,#66187,#66188)); +#66180 = ORIENTED_EDGE('',*,*,#63574,.T.); +#66181 = ORIENTED_EDGE('',*,*,#66182,.T.); +#66182 = EDGE_CURVE('',#63575,#64573,#66183,.T.); +#66183 = LINE('',#66184,#66185); +#66184 = CARTESIAN_POINT('',(159.1,-102.3,-4.6E-02)); +#66185 = VECTOR('',#66186,1.); +#66186 = DIRECTION('',(0.,0.,1.)); +#66187 = ORIENTED_EDGE('',*,*,#64572,.F.); +#66188 = ORIENTED_EDGE('',*,*,#66182,.F.); +#66189 = CYLINDRICAL_SURFACE('',#66190,0.4); +#66190 = AXIS2_PLACEMENT_3D('',#66191,#66192,#66193); +#66191 = CARTESIAN_POINT('',(159.1,-101.9,-4.6E-02)); +#66192 = DIRECTION('',(-0.,-0.,-1.)); +#66193 = DIRECTION('',(-0.,-1.,0.)); +#66194 = ADVANCED_FACE('',(#66195),#66206,.F.); +#66195 = FACE_BOUND('',#66196,.T.); +#66196 = EDGE_LOOP('',(#66197,#66198,#66204,#66205)); +#66197 = ORIENTED_EDGE('',*,*,#63585,.T.); +#66198 = ORIENTED_EDGE('',*,*,#66199,.T.); +#66199 = EDGE_CURVE('',#63586,#64584,#66200,.T.); +#66200 = LINE('',#66201,#66202); +#66201 = CARTESIAN_POINT('',(176.5,-108.875,-4.6E-02)); +#66202 = VECTOR('',#66203,1.); +#66203 = DIRECTION('',(0.,0.,1.)); +#66204 = ORIENTED_EDGE('',*,*,#64583,.F.); +#66205 = ORIENTED_EDGE('',*,*,#66199,.F.); +#66206 = CYLINDRICAL_SURFACE('',#66207,0.475); +#66207 = AXIS2_PLACEMENT_3D('',#66208,#66209,#66210); +#66208 = CARTESIAN_POINT('',(176.5,-108.4,-4.6E-02)); +#66209 = DIRECTION('',(-0.,-0.,-1.)); +#66210 = DIRECTION('',(-0.,-1.,0.)); +#66211 = ADVANCED_FACE('',(#66212),#66223,.F.); +#66212 = FACE_BOUND('',#66213,.T.); +#66213 = EDGE_LOOP('',(#66214,#66215,#66221,#66222)); +#66214 = ORIENTED_EDGE('',*,*,#63596,.T.); +#66215 = ORIENTED_EDGE('',*,*,#66216,.T.); +#66216 = EDGE_CURVE('',#63597,#64595,#66217,.T.); +#66217 = LINE('',#66218,#66219); +#66218 = CARTESIAN_POINT('',(176.5,-106.375,-4.6E-02)); +#66219 = VECTOR('',#66220,1.); +#66220 = DIRECTION('',(0.,0.,1.)); +#66221 = ORIENTED_EDGE('',*,*,#64594,.F.); +#66222 = ORIENTED_EDGE('',*,*,#66216,.F.); +#66223 = CYLINDRICAL_SURFACE('',#66224,0.475); +#66224 = AXIS2_PLACEMENT_3D('',#66225,#66226,#66227); +#66225 = CARTESIAN_POINT('',(176.5,-105.9,-4.6E-02)); +#66226 = DIRECTION('',(-0.,-0.,-1.)); +#66227 = DIRECTION('',(-0.,-1.,0.)); +#66228 = ADVANCED_FACE('',(#66229),#66240,.F.); +#66229 = FACE_BOUND('',#66230,.T.); +#66230 = EDGE_LOOP('',(#66231,#66232,#66238,#66239)); +#66231 = ORIENTED_EDGE('',*,*,#63607,.T.); +#66232 = ORIENTED_EDGE('',*,*,#66233,.T.); +#66233 = EDGE_CURVE('',#63608,#64606,#66234,.T.); +#66234 = LINE('',#66235,#66236); +#66235 = CARTESIAN_POINT('',(176.5,-103.875,-4.6E-02)); +#66236 = VECTOR('',#66237,1.); +#66237 = DIRECTION('',(0.,0.,1.)); +#66238 = ORIENTED_EDGE('',*,*,#64605,.F.); +#66239 = ORIENTED_EDGE('',*,*,#66233,.F.); +#66240 = CYLINDRICAL_SURFACE('',#66241,0.475); +#66241 = AXIS2_PLACEMENT_3D('',#66242,#66243,#66244); +#66242 = CARTESIAN_POINT('',(176.5,-103.4,-4.6E-02)); +#66243 = DIRECTION('',(-0.,-0.,-1.)); +#66244 = DIRECTION('',(-0.,-1.,0.)); +#66245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#66249)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#66246,#66247,#66248)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#66246 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#66247 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#66248 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#66249 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#66246, + 'distance_accuracy_value','confusion accuracy'); +#66250 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#66251,#66253); +#66251 = ( REPRESENTATION_RELATIONSHIP('','',#62517,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#66252) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#66252 = ITEM_DEFINED_TRANSFORMATION('','',#11,#227); +#66253 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #66254); +#66254 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('54','=>[0:1:1:23]','',#5,#62512 + ,$); +#66255 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#62514)); +#66256 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #66257),#66245); +#66257 = STYLED_ITEM('color',(#66258),#62518); +#66258 = PRESENTATION_STYLE_ASSIGNMENT((#66259)); +#66259 = SURFACE_STYLE_USAGE(.BOTH.,#66260); +#66260 = SURFACE_SIDE_STYLE('',(#66261)); +#66261 = SURFACE_STYLE_FILL_AREA(#66262); +#66262 = FILL_AREA_STYLE('',(#66263)); +#66263 = FILL_AREA_STYLE_COLOUR('',#66264); +#66264 = COLOUR_RGB('',0.313304153717,0.484529207832,0.410020903123); +ENDSEC; +END-ISO-10303-21; diff --git a/pcb/tools/board.py b/pcb/tools/board.py new file mode 100644 index 0000000..ae4126d --- /dev/null +++ b/pcb/tools/board.py @@ -0,0 +1,357 @@ +"""Board model: placed footprints, absolute pad geometry, KiCad file writers.""" +import copy +import json +import math +import os +import uuid as uuidlib + +import design as D +from kilib import load_footprint, fp_pads, fp_courtyard +from sexpr import QStr, dumps, find, findall + +OX, OY = D.ORIGIN + +# Driver sockets: only the two female header strips sit on the board. The plugged-in module is +# about 8.5 mm up, so low parts (the VMOT ceramics) may go between the strips. +POLOLU = 'Module:Pololu_Breakout-16_15.2x20.3mm' +POLOLU_COURT = [(-1.53, -1.52, 1.53, 19.3), (11.17, -1.52, 14.21, 19.3)] + + +def uid(*parts): + """Deterministic UUID so regenerated files diff cleanly.""" + return str(uuidlib.uuid5(uuidlib.NAMESPACE_URL, 'sandtable-pcb/' + '/'.join(map(str, parts)))) + + +def rot_pt(x, y, deg): + """KiCad footprint transform (y down, positive = CCW on screen).""" + t = math.radians(deg) + c, s = round(math.cos(t), 12), round(math.sin(t), 12) + return (x * c + y * s, -x * s + y * c) + + +class Pad: + __slots__ = ('ref', 'num', 'net', 'x', 'y', 'hx', 'hy', 'shape', 'layers', 'drill', 'kind') + + def dist(self, px, py): + """Distance from point to pad copper (0 inside).""" + dx = abs(px - self.x) + dy = abs(py - self.y) + if self.shape == 'circle': + return max(0.0, math.hypot(dx, dy) - self.hx) + if self.shape == 'oval': + if self.hx >= self.hy: + r = self.hy + ex = max(0.0, dx - (self.hx - r)) + return max(0.0, math.hypot(ex, dy) - r) + r = self.hx + ey = max(0.0, dy - (self.hy - r)) + return max(0.0, math.hypot(dx, ey) - r) + ex = max(0.0, dx - self.hx) + ey = max(0.0, dy - self.hy) + return math.hypot(ex, ey) + + +class Part: + def __init__(self, ref, spec): + self.ref = ref + (self.sym, self.fp_id, self.value, self.x, self.y, self.rot, + self.lcsc, self.descr) = spec + self.fp = load_footprint(self.fp_id, min_drill=D.MIN_DRILL, min_ring=D.MIN_RING, solid_thermal_pads=True) + self.raw_pads = fp_pads(self.fp) + self.pin_net = {} + + def court_rects(self): + """Courtyard as axis-aligned rects in board coords.""" + if self.fp_id == 'RF_Module:ESP32-WROOM-32E': + local = [(-9.75, -6.31, 9.75, 13.54), (-24.25, -28.0, 24.25, -6.31)] + elif self.fp_id == POLOLU: + local = POLOLU_COURT + else: + c = fp_courtyard(self.fp) + local = [c] if c else [] + out = [] + for (x0, y0, x1, y1) in local: + pts = [rot_pt(x, y, self.rot) for x, y in ((x0, y0), (x1, y0), (x0, y1), (x1, y1))] + xs = [p[0] + self.x for p in pts] + ys = [p[1] + self.y for p in pts] + out.append((min(xs), min(ys), max(xs), max(ys))) + return out + + def pads(self): + out = [] + for p in self.raw_pads: + if p['kind'] == 'connect': + continue + px, py = rot_pt(p['x'], p['y'], self.rot) + ang = (p['rot'] + self.rot) % 180 + w, h = p['w'], p['h'] + if abs(ang - 90) < 1: + w, h = h, w + pad = Pad() + pad.ref = self.ref + pad.num = p['num'] + pad.net = self.pin_net.get(p['num']) + pad.x = self.x + px + pad.y = self.y + py + pad.hx, pad.hy = w / 2, h / 2 + shape = p['shape'] + pad.shape = 'circle' if shape == 'circle' else ('oval' if shape == 'oval' else 'rect') + if pad.shape == 'circle': + pad.hx = pad.hy = w / 2 + pad.kind = p['kind'] + if p['kind'] == 'np_thru_hole': + pad.layers = () + elif any(l in ('*.Cu', 'F&B.Cu') for l in p['layers']): + pad.layers = ('F.Cu', 'B.Cu') + else: + pad.layers = tuple(l for l in p['layers'] if l in ('F.Cu', 'B.Cu')) + pad.drill = p['drill'] + out.append(pad) + return out + + +def build(): + parts = {ref: Part(ref, spec) for ref, spec in D.PARTS.items()} + for net, pins in D.NETS.items(): + for pin in pins: + ref, num = pin.split('.', 1) + if ref not in parts: + raise KeyError(f'net {net}: unknown part {ref}') + nums = {p['num'] for p in parts[ref].raw_pads} + if num not in nums: + raise KeyError(f'net {net}: {ref} has no pad {num}') + if num in parts[ref].pin_net: + raise ValueError(f'{pin} in two nets') + parts[ref].pin_net[num] = net + return parts + + +def check_placement(parts): + problems = [] + rects = [] + for p in parts.values(): + for r in p.court_rects(): + rects.append((p.ref, r)) + for i in range(len(rects)): + for j in range(i + 1, len(rects)): + a, ra = rects[i] + b, rb = rects[j] + if a == b: + continue + ox = min(ra[2], rb[2]) - max(ra[0], rb[0]) + oy = min(ra[3], rb[3]) - max(ra[1], rb[1]) + if ox > 0.001 and oy > 0.001: + problems.append(f'courtyard overlap {a} / {b}: {ox:.2f} x {oy:.2f}') + for p in parts.values(): + for pad in p.pads(): + if pad.layers and (pad.x - pad.hx < 0.3 or pad.y - pad.hy < 0.3 or + pad.x + pad.hx > D.BOARD_W - 0.3 or pad.y + pad.hy > D.BOARD_H - 0.3): + problems.append(f'pad near/outside edge {p.ref}.{pad.num} at ({pad.x:.2f},{pad.y:.2f})') + return problems + + +# ---------------------------------------------------------------- writers +def pcb_name(net): + """KiCad names nets from local labels with the sheet path prefix.""" + return net if net.startswith('unconnected-') else '/' + net + + +def nc_nets(): + """Single-pad nets KiCad creates for unconnected symbol pins: (ref, pad) -> name.""" + import sch + from kilib import sym_pins + connected = {p for pins in D.NETS.values() for p in pins} + out = {} + for ref, spec in D.PARTS.items(): + full, sym, _ = sch.symbol_def(spec[0]) + for pin in sym_pins(sym): + key = f'{ref}.{pin["num"]}' + if key not in connected: + out[(ref, pin['num'])] = f'unconnected-({ref}-{pin["name"]}-Pad{pin["num"]})' + return out + + +def net_list(): + names = sorted(D.NETS.keys(), key=lambda n: (n != 'GND', n)) + ids = {n: i + 1 for i, n in enumerate(names)} + for name in sorted(set(nc_nets().values())): + ids[name] = len(ids) + 1 + return ids + + +NC_NETS = {} + + +def footprint_node(part, net_ids, sheet_file): + fp = copy.deepcopy(part.fp) + keep = [x for x in fp[2:] if not (isinstance(x, list) and x and x[0] in + ('version', 'generator', 'generator_version', 'layer', 'zone'))] + if part.fp_id == POLOLU: + def on_crtyd(x): + lay = find(x, 'layer') if isinstance(x, list) else None + return lay is not None and str(lay[1]) == 'F.CrtYd' + keep = [x for x in keep if not (isinstance(x, list) and x and x[0] in ('fp_line', 'fp_rect') and on_crtyd(x))] + for i, (x0, y0, x1, y1) in enumerate(POLOLU_COURT): + keep.append(['fp_rect', ['start', fmt(x0), fmt(y0)], ['end', fmt(x1), fmt(y1)], + ['stroke', ['width', '0.05'], ['type', 'solid']], ['fill', 'no'], + ['layer', QStr('F.CrtYd')], ['uuid', QStr(uid('crtyd', part.ref, i))]]) + node = ['footprint', QStr(part.fp_id), ['layer', QStr('F.Cu')], ['uuid', QStr(uid('fp', part.ref))], + ['at', fmt(part.x + OX), fmt(part.y + OY)] + ([fmt(part.rot)] if part.rot else [])] + for x in keep: + if isinstance(x, list) and x and x[0] == 'property': + name = str(x[1]) + if name == 'Reference': + x[2] = QStr(part.ref) + elif name == 'Value': + x[2] = QStr(part.value) + small = part.fp_id.split(':')[0] in ('Resistor_SMD', 'LED_SMD', 'Button_Switch_SMD') or \ + (part.fp_id.startswith('Capacitor_SMD:C_')) or part.fp_id.endswith(('SOT-23', 'SOT-23-5', 'D_SOD-123')) + if name == 'Reference' and small: + eff = find(x, 'effects') + fnt = find(eff, 'font') if eff else None + if fnt is not None: + sz, th = find(fnt, 'size'), find(fnt, 'thickness') + if sz is not None: + sz[1:] = ['0.7', '0.7'] + if th is not None: + th[1] = '0.1' + at = find(x, 'at') + if at is not None and name == 'Reference' and part.ref in getattr(D, 'REF_POS', {}) and not part.rot: + at[1], at[2] = fmt(D.REF_POS[part.ref][0]), fmt(D.REF_POS[part.ref][1]) + if at is not None: + # absolute text angle: keep text readable (0 or 90) + while len(at) < 4: + at.append('0') + at[3] = '0' if name in ('Reference', 'Value') else fmt(part.rot) + if find(x, 'uuid') is None: + x.insert(3, ['uuid', QStr(uid('prop', part.ref, name))]) + if isinstance(x, list) and x and x[0] == 'pad': + at = find(x, 'at') + local = float(at[3]) if len(at) > 3 else 0.0 + ang = (local + part.rot) % 360 + del at[3:] + if ang: + at.append(fmt(ang)) + num = str(x[1]) + net = part.pin_net.get(num) or NC_NETS.get((part.ref, num)) + if net and x[2] != 'np_thru_hole': + x.append(['net', str(net_ids[net]), QStr(pcb_name(net))]) + x.append(['uuid', QStr(uid('pad', part.ref, num, len(x)))]) + node.append(x) + # extra properties + node.insert(5, ['property', QStr('LCSC'), QStr(part.lcsc), ['at', '0', '0', '0'], ['layer', QStr('F.Fab')], + ['hide', 'yes'], ['uuid', QStr(uid('prop', part.ref, 'LCSC'))], + ['effects', ['font', ['size', '1', '1'], ['thickness', '0.15']]]]) + node.append(['path', QStr('/' + uid('sym', part.ref))]) + node.append(['sheetname', QStr('/')]) + node.append(['sheetfile', QStr(sheet_file)]) + return node + + +def fmt(v): + s = f'{float(v):.4f}'.rstrip('0').rstrip('.') + return '0' if s in ('-0', '') else s + + +HEADER_LAYERS = ['layers', + ['0', QStr('F.Cu'), 'signal'], ['2', QStr('B.Cu'), 'signal'], + ['9', QStr('F.Adhes'), 'user', QStr('F.Adhesive')], ['11', QStr('B.Adhes'), 'user', QStr('B.Adhesive')], + ['13', QStr('F.Paste'), 'user'], ['15', QStr('B.Paste'), 'user'], + ['5', QStr('F.SilkS'), 'user', QStr('F.Silkscreen')], ['7', QStr('B.SilkS'), 'user', QStr('B.Silkscreen')], + ['1', QStr('F.Mask'), 'user'], ['3', QStr('B.Mask'), 'user'], + ['17', QStr('Dwgs.User'), 'user', QStr('User.Drawings')], ['19', QStr('Cmts.User'), 'user', QStr('User.Comments')], + ['21', QStr('Eco1.User'), 'user', QStr('User.Eco1')], ['23', QStr('Eco2.User'), 'user', QStr('User.Eco2')], + ['25', QStr('Edge.Cuts'), 'user'], ['27', QStr('Margin'), 'user'], + ['31', QStr('F.CrtYd'), 'user', QStr('F.Courtyard')], ['29', QStr('B.CrtYd'), 'user', QStr('B.Courtyard')], + ['35', QStr('F.Fab'), 'user'], ['33', QStr('B.Fab'), 'user']] + + +def text_node(txt, x, y, layer, size=1.2, angle=0, bold=False, justify=None): + eff = ['effects', ['font', ['size', fmt(size), fmt(size)], ['thickness', fmt(size * 0.15)]] + ([['bold', 'yes']] if bold else [])] + if justify: + eff.append(['justify'] + justify) + if layer.startswith('B.'): + eff.append(['justify', 'mirror']) + return ['gr_text', QStr(txt), ['at', fmt(x + OX), fmt(y + OY), fmt(angle)], ['layer', QStr(layer)], + ['uuid', QStr(uid('txt', txt, x, y, layer))], eff] + + +def write_pcb(path, parts, tracks=(), vias=(), zones=(), texts=(), sheet_file='sandtable-controller.kicad_sch'): + NC_NETS.clear() + NC_NETS.update(nc_nets()) + net_ids = net_list() + root = ['kicad_pcb', ['version', '20241229'], ['generator', QStr('pcbnew')], ['generator_version', QStr('9.0')], + ['general', ['thickness', '1.6'], ['legacy_teardrops', 'no']], ['paper', QStr('A4')], + ['title_block', ['title', QStr('SandTable Controller')], ['date', QStr('2026-10-22')], ['rev', QStr(D.VERSION)], + ['company', QStr('lazypugs')], ['comment', '1', QStr('ESP32 + 2x DRV8825 StepStick, drop-in for the Uno bay')]], + HEADER_LAYERS, + ['setup', ['pad_to_mask_clearance', '0'], ['allow_soldermask_bridges_in_footprints', 'no'], + ['tenting', 'front', 'back'], ['aux_axis_origin', fmt(OX), fmt(OY + D.BOARD_H)], + ['pcbplotparams', ['layerselection', '0x00000000_00000000_55555555_5755f5ff'], + ['plot_on_all_layers_selection', '0x00000000_00000000_00000000_00000000'], + ['disableapertmacros', 'no'], ['usegerberextensions', 'no'], ['usegerberattributes', 'yes'], + ['usegerberadvancedattributes', 'yes'], ['creategerberjobfile', 'yes'], ['svgprecision', '4'], + ['plotframeref', 'no'], ['mode', '1'], ['useauxorigin', 'no'], ['outputformat', '1'], + ['mirror', 'no'], ['drillshape', '1'], ['scaleselection', '1'], ['outputdirectory', QStr('')]]], + ['net', '0', QStr('')]] + for name, i in sorted(net_ids.items(), key=lambda kv: kv[1]): + root.append(['net', str(i), QStr(pcb_name(name))]) + for ref in sorted(parts): + root.append(footprint_node(parts[ref], net_ids, sheet_file)) + # board outline + root.append(['gr_rect', ['start', fmt(OX), fmt(OY)], ['end', fmt(OX + D.BOARD_W), fmt(OY + D.BOARD_H)], + ['stroke', ['width', '0.05'], ['type', 'default']], ['fill', 'no'], ['layer', QStr('Edge.Cuts')], + ['uuid', QStr(uid('edge'))]]) + root.extend(texts) + for (x1, y1, x2, y2, w, layer, net) in tracks: + root.append(['segment', ['start', fmt(x1 + OX), fmt(y1 + OY)], ['end', fmt(x2 + OX), fmt(y2 + OY)], + ['width', fmt(w)], ['layer', QStr(layer)], ['net', str(net_ids[net])], + ['uuid', QStr(uid('seg', x1, y1, x2, y2, layer, net))]]) + for (x, y, net) in vias: + root.append(['via', ['at', fmt(x + OX), fmt(y + OY)], ['size', fmt(D.VIA[0])], ['drill', fmt(D.VIA[1])], + ['layers', QStr('F.Cu'), QStr('B.Cu')], ['net', str(net_ids[net])], + ['uuid', QStr(uid('via', x, y, net))]]) + root.extend(zones) + with open(path, 'w') as f: + f.write(dumps(root) + '\n') + return net_ids + + +def keepout_zone(name, x0, y0, x1, y1): + return ['zone', ['net', '0'], ['net_name', QStr('')], ['layers', QStr('F.Cu'), QStr('B.Cu')], + ['uuid', QStr(uid('zone', name))], ['name', QStr(name)], ['hatch', 'edge', '0.5'], + ['connect_pads', ['clearance', '0']], ['min_thickness', '0.25'], ['filled_areas_thickness', 'no'], + ['keepout', ['tracks', 'not_allowed'], ['vias', 'not_allowed'], ['pads', 'not_allowed'], + ['copperpour', 'not_allowed'], ['footprints', 'allowed']], + ['placement', ['enabled', 'no'], ['sheetname', QStr('')]], + ['fill', ['thermal_gap', '0.5'], ['thermal_bridge_width', '0.5']], + ['polygon', ['pts'] + [['xy', fmt(x + OX), fmt(y + OY)] for x, y in + ((x0, y0), (x1, y0), (x1, y1), (x0, y1))]]] + + +def write_project(path, name): + tmpl = '/snap/kicad/current/usr/share/kicad/template/API_Series-500/API_Series-500.kicad_pro' + with open(tmpl) as f: + pro = json.load(f) + pro['meta']['filename'] = name + '.kicad_pro' + base = pro['net_settings']['classes'][0] + classes = [] + for cname, (w, clr) in D.NETCLASS.items(): + c = dict(base) + c.update(name=cname, track_width=w, clearance=clr, via_diameter=D.VIA[0], via_drill=D.VIA[1], + priority=2147483647 if cname == 'Default' else 0) + classes.append(c) + pro['net_settings']['classes'] = classes + pro['net_settings']['netclass_patterns'] = [{'netclass': c, 'pattern': pcb_name(n)} for n, c in D.NET_TO_CLASS.items()] + rules = pro['board']['design_settings']['rules'] + # PCBWay standard process limits + rules.update(min_clearance=0.16, min_track_width=0.16, min_via_diameter=0.6, min_through_hole_diameter=D.MIN_DRILL, + min_copper_edge_clearance=0.3, min_hole_clearance=0.2, min_hole_to_hole=0.25, + min_via_annular_width=0.15, min_silk_clearance=0.0) + sev = pro['board']['design_settings']['rule_severities'] + sev.update({'silk_over_copper': 'ignore', 'silk_overlap': 'ignore', 'silk_edge_clearance': 'ignore', + 'lib_footprint_issues': 'ignore', 'lib_footprint_mismatch': 'ignore', 'text_height': 'ignore'}) + pro.pop('boards', None) + pro['sheets'] = [[uid('rootsheet'), 'Root']] + with open(path, 'w') as f: + json.dump(pro, f, indent=2) diff --git a/pcb/tools/design.py b/pcb/tools/design.py new file mode 100644 index 0000000..459e321 --- /dev/null +++ b/pcb/tools/design.py @@ -0,0 +1,203 @@ +"""SandTable Controller (version in VERSION): single source of truth for parts, placement and nets. + +Board coordinates are mm, y down, origin at the board's top-left corner. +x = 0 is the edge that faces the table wall (power + USB); x = 80 faces the +table centre (motor/sensor connectors). The 4 mounting holes reuse the +Arduino Uno hole pattern so the board drops onto the existing deck standoffs. +""" + +VERSION = '0.4' +BOARD_W = 80.0 +BOARD_H = 63.34 +ORIGIN = (100.0, 100.0) # where board (0,0) lands in KiCad coordinates + +# ---------------------------------------------------------------- parts +# ref: (symbol lib_id, footprint lib_id, value, x, y, rot, lcsc, description) +PARTS = { + 'U1': ('RF_Module:ESP32-WROOM-32E', 'RF_Module:ESP32-WROOM-32E', 'ESP32-WROOM-32E-N8', 43.0, 50.59, 180, '', 'Wi-Fi MCU module (FluidNC)'), + 'U2': ('Interface_USB:CH340C', 'Package_SO:SOIC-16_3.9x9.9mm_P1.27mm', 'CH340C', 22.0, 47.0, 0, 'C84681', 'USB-UART bridge'), + 'U3': ('Regulator_Linear:AP7361C-33E', 'Package_TO_SOT_SMD:SOT-223-3_TabPin2', 'AP7361C-33E', 66.0, 41.5, 0, '', '5V -> 3.3V LDO, 0.36 V dropout at 1 A (pin 1 IN, 2 GND/tab, 3 OUT)'), + 'U4': ('74xGxx:74AHCT1G125', 'Package_TO_SOT_SMD:SOT-23-5', '74AHCT1G125', 65.5, 30.0, 0, '', '3.3V -> 5V LED data buffer'), + 'PS1': ('Converter_DCDC:R-78E5.0-1.0', 'Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT', 'R-78E5.0-1.0', 18.0, 35.0, 0, '', '12V -> 5V 1A switching regulator'), + 'A1': ('Driver_Motor:Pololu_Breakout_A4988', 'Module:Pololu_Breakout-16_15.2x20.3mm', 'DRV8825 StepStick (theta/spin)', 38.1, 1.9, 270, '', 'Stepper driver socket (DRV8825, 1/32 step)'), + 'A2': ('Driver_Motor:Pololu_Breakout_A4988', 'Module:Pololu_Breakout-16_15.2x20.3mm', 'DRV8825 StepStick (rho/arm)', 59.1, 1.9, 270, '', 'Stepper driver socket (DRV8825, 1/32 step)'), + 'J1': ('Connector:Barrel_Jack', 'Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal', '12V DC 5.5x2.1', 12.3, 25.0, 270, '', 'Power input'), + 'J2': ('Connector:USB_C_Receptacle_USB2.0_16P', 'Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12', 'USB-C', 3.4, 44.0, 270, 'C165948', 'Programming / serial'), + 'J3': ('Connector_Generic:Conn_01x04', 'Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical', 'SPIN MOTOR', 4.5, 3.4, 270, 'C158012', 'Theta motor (XH-4, matches motor cable)'), + 'J4': ('Connector_Generic:Conn_01x04', 'Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical', 'ARM MOTOR', 76.5, 3.4, 270, 'C158012', 'Rho motor via slip ring'), + 'J5': ('Connector_Generic:Conn_01x03', 'Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', 'HOME SW', 76.5, 18.5, 270, 'C144394', 'Rho home switch (via slip ring)'), + 'J6': ('Connector_Generic:Conn_01x03', 'Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', 'HALL', 76.5, 29.6, 270, 'C144394', 'Optional theta hall sensor (5V)'), + 'J7': ('Connector_Generic:Conn_01x03', 'Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical', 'LED STRIP', 76.5, 40.7, 270, 'C144394', 'WS2812B strip (5V, small strips only)'), + 'J8': ('Connector_Generic:Conn_01x04', 'Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical', 'EXPANSION', 77.5, 52.0, 0, '', '3V3 / IO32 / IO25 / GND'), + 'D1': ('Device:D_Schottky', 'Diode_SMD:D_SMA', 'SS34', 16.0, 22.0, 90, 'C8678', 'Reverse-polarity protection'), + 'D2': ('Device:D_Schottky', 'Diode_SMD:D_SMA', 'SS34', 28.87, 33.0, 90, 'C8678', '5V OR-ing (regulator, 1 A)'), + 'D3': ('Device:D_Schottky', 'Diode_SMD:D_SOD-123', 'B5819W', 13.0, 39.8, 0, 'C8598', '5V OR-ing (USB)'), + 'D4': ('Device:LED', 'LED_SMD:LED_0603_1608Metric', 'GREEN', 34.0, 30.0, 0, 'C72043', 'Power LED'), + 'D5': ('Device:LED', 'LED_SMD:LED_0603_1608Metric', 'BLUE', 38.0, 30.0, 0, 'C72041', 'Status LED (IO2)'), + 'Q1': ('Transistor_BJT:MMBT3904', 'Package_TO_SOT_SMD:SOT-23', 'MMBT3904', 28.0, 47.2, 0, 'C20526', 'Auto-reset (EN)'), + 'Q2': ('Transistor_BJT:MMBT3904', 'Package_TO_SOT_SMD:SOT-23', 'MMBT3904', 28.0, 51.2, 0, 'C20526', 'Auto-reset (IO0)'), + 'SW1': ('Switch:SW_Push', 'Button_Switch_SMD:SW_SPST_B3U-1000P', 'RESET', 27.5, 55.0, 0, 'C231329', 'EN / reset button'), + 'SW2': ('Switch:SW_Push', 'Button_Switch_SMD:SW_SPST_B3U-1000P', 'BOOT', 22.0, 55.0, 0, 'C231329', 'IO0 / boot button'), + 'C1': ('Device:C_Polarized', 'Capacitor_SMD:CP_Elec_8x10', '100uF 25V', 24.0, 21.0, 0, '', 'Theta driver VMOT bulk'), + 'C2': ('Device:C_Polarized', 'Capacitor_SMD:CP_Elec_8x10', '100uF 25V', 45.5, 21.0, 0, '', 'Rho driver VMOT bulk'), + 'C3': ('Device:C', 'Capacitor_SMD:C_1206_3216Metric', '10uF 25V', 20.5, 39.6, 0, 'C13585', '12V input decoupling'), + 'C4': ('Device:C', 'Capacitor_SMD:C_1206_3216Metric', '10uF 16V', 26.0, 39.6, 0, 'C13585', 'Regulator output'), + 'C5': ('Device:C', 'Capacitor_SMD:C_0805_2012Metric', '10uF', 59.6, 44.0, 90, 'C15850', 'LDO input'), + 'C6': ('Device:C', 'Capacitor_SMD:C_0805_2012Metric', '22uF', 59.6, 39.5, 90, 'C45783', 'LDO output'), + 'C7': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 27.0, 43.0, 90, 'C14663', 'CH340C decoupling'), + 'C8': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '1uF', 54.6, 52.7, 0, 'C15849', 'EN reset delay'), + 'C9': ('Device:C', 'Capacitor_SMD:C_0805_2012Metric', '10uF', 57.5, 54.6, 90, 'C15850', 'ESP32 bulk decoupling'), + 'C10': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 55.0, 55.0, 90, 'C14663', 'ESP32 decoupling'), + 'C13': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 61.0, 18.5, 0, 'C14663', 'Home switch filter'), + 'C14': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 61.0, 20.7, 0, 'C14663', 'Hall filter'), + 'C15': ('Device:C', 'Capacitor_SMD:C_0603_1608Metric', '100nF', 61.0, 30.0, 90, 'C14663', 'Buffer decoupling'), + 'R1': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '5.1k', 11.5, 42.75, 0, 'C23186', 'USB-C CC1 pull-down'), + 'R2': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '5.1k', 11.5, 45.75, 0, 'C23186', 'USB-C CC2 pull-down'), + 'R3': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 31.0, 45.0, 90, 'C25804', 'Q1 base'), + 'R4': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 31.0, 49.5, 90, 'C25804', 'Q2 base'), + 'R5': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 54.6, 51.0, 0, 'C25804', 'EN pull-up'), + 'R6': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 31.0, 37.5, 0, 'C25804', 'IO0 pull-up'), + 'R8': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 47.0, 31.0, 0, 'C25804', 'Driver enable pull-up (off at boot)'), + 'R9': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 54.0, 18.5, 0, 'C25804', 'Home switch pull-up'), + 'R10': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '1k', 57.5, 18.5, 0, 'C21190', 'Home switch series'), + 'R11': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '10k', 54.0, 20.7, 0, 'C25804', 'Hall pull-up'), + 'R12': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '1k', 57.5, 20.7, 0, 'C21190', 'Hall series'), + 'R13': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '330', 70.0, 30.0, 90, 'C23138', 'LED data series'), + 'R14': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '1k', 34.0, 32.5, 0, 'C21190', 'Power LED'), + 'R15': ('Device:R', 'Resistor_SMD:R_0603_1608Metric', '1k', 38.0, 32.5, 0, 'C21190', 'Status LED'), + # v0.4 additions (positions set by tools/place_new.py) + 'C16': ('Device:C', 'Capacitor_SMD:C_1206_3216Metric', '10uF 50V', 21.8, 5.4, 0, '', 'Theta driver VMOT ceramic, at the socket pins'), + 'C17': ('Device:C', 'Capacitor_SMD:C_1206_3216Metric', '10uF 50V', 42.8, 5.4, 0, '', 'Rho driver VMOT ceramic, at the socket pins'), + 'F1': ('Device:Polyfuse', 'Fuse:Fuse_1812_4532Metric', '2.5A PTC', 12.6, 16.2, 0, '', '12V input resettable fuse'), + 'U5': ('Power_Protection:USBLC6-2SC6', 'Package_TO_SOT_SMD:SOT-23-6', 'USBLC6-2SC6', 13.0, 49.5, 0, '', 'USB data ESD protection'), + 'D6': ('Device:D_Schottky', 'Diode_SMD:D_SOD-323', 'BAT54WS', 64.5, 18.0, 0, '', 'Home input clamp to 3.3V (5V-safe)'), + 'D7': ('Device:D_Schottky', 'Diode_SMD:D_SOD-323', 'BAT54WS', 64.5, 15.85, 0, '', 'Hall input clamp to 3.3V (5V-safe)'), + 'JP1': ('Jumper:SolderJumper_2_Open', 'Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm', 'A4988', 36.0, 8.0, 0, '', 'Driver pin 2 to 3.3V: bridge only for A4988 (VDD); leave open for DRV8825 (FAULT)'), + 'H1': ('Mechanical:MountingHole', 'MountingHole:MountingHole_3.2mm_M3', 'M3', 15.24, 7.54, 0, '', 'Uno hole'), + 'H2': ('Mechanical:MountingHole', 'MountingHole:MountingHole_3.2mm_M3', 'M3', 13.97, 55.8, 0, '', 'Uno hole'), + 'H3': ('Mechanical:MountingHole', 'MountingHole:MountingHole_3.2mm_M3', 'M3', 66.04, 22.78, 0, '', 'Uno hole'), + 'H4': ('Mechanical:MountingHole', 'MountingHole:MountingHole_3.2mm_M3', 'M3', 66.04, 50.72, 0, '', 'Uno hole'), +} + +# Silkscreen reference positions that would otherwise collide (offset from the part origin, mm) +REF_POS = {'C16': (3.6, 0.0), 'C17': (3.6, 0.0), 'D6': (2.9, 0.0), 'D7': (2.9, 0.0), 'SW1': (0.0, 2.7), 'H3': (0.0, 4.4)} + +# ---------------------------------------------------------------- nets +NETS = { + 'GND': ['J1.2', 'J2.A1', 'J2.A12', 'J2.B1', 'J2.B12', 'J2.S1', 'C1.2', 'C2.2', 'C3.2', 'C4.2', 'C5.2', + 'C6.2', 'C7.2', 'C8.2', 'C9.2', 'C10.2', 'C13.2', 'C14.2', 'C15.2', 'PS1.2', 'U3.2', 'U2.1', + 'C16.2', 'C17.2', 'U5.2', + 'U1.1', 'U1.15', 'U1.38', 'U1.39', 'A1.1', 'A1.7', 'A2.1', 'A2.7', + 'J5.3', 'J6.3', 'J7.3', 'J8.4', 'SW1.2', 'SW2.2', 'R1.2', 'R2.2', 'D4.1', 'D5.1', 'U4.1', 'U4.3'], + 'VIN_RAW': ['J1.1', 'F1.1'], + 'VIN_FUSED': ['F1.2', 'D1.2'], + '+12V': ['D1.1', 'C1.1', 'C2.1', 'C3.1', 'PS1.1', 'A1.8', 'A2.8', 'C16.1', 'C17.1'], + '+5V_REG': ['PS1.3', 'C4.1', 'D2.2'], + 'VBUS': ['J2.A4', 'J2.A9', 'J2.B4', 'J2.B9', 'D3.2', 'U5.5'], + '+5V': ['D2.1', 'D3.1', 'U3.1', 'C5.1', 'U4.5', 'C15.1', 'J6.1', 'J7.1'], + '+3V3': ['U3.3', 'C6.1', 'U1.2', 'C9.1', 'C10.1', 'U2.16', 'U2.4', 'C7.1', 'R5.1', 'R6.1', 'R8.1', + 'R9.1', 'R11.1', 'R14.1', 'J5.1', 'J8.1', 'JP1.1', 'D6.1', 'D7.1', + # DRV8825 sockets: M0-M2 high (1/32 step), RESET + SLEEP high (awake) + 'A1.10', 'A1.11', 'A1.12', 'A1.13', 'A1.14', + 'A2.10', 'A2.11', 'A2.12', 'A2.13', 'A2.14'], + # socket pin 2 is FAULT on a DRV8825 and VDD on an A4988: only bridged to 3.3V for A4988 modules + 'DRV_VDD': ['A1.2', 'A2.2', 'JP1.2'], + 'USB_DP': ['J2.A6', 'J2.B6', 'U5.1', 'U5.6', 'U2.5'], + 'USB_DM': ['J2.A7', 'J2.B7', 'U5.3', 'U5.4', 'U2.6'], + 'CC1': ['J2.A5', 'R1.1'], + 'CC2': ['J2.B5', 'R2.1'], + 'U0TXD': ['U1.35', 'U2.3'], + 'U0RXD': ['U1.34', 'U2.2'], + 'DTR': ['U2.13', 'R3.1', 'Q2.2'], + 'RTS': ['U2.14', 'R4.1', 'Q1.2'], + 'Q1B': ['R3.2', 'Q1.1'], + 'Q2B': ['R4.2', 'Q2.1'], + 'EN': ['Q1.3', 'U1.3', 'R5.2', 'C8.1', 'SW1.1'], + 'IO0': ['Q2.3', 'U1.25', 'R6.2', 'SW2.1'], + 'DRV_EN': ['U1.16', 'R8.2', 'A1.9', 'A2.9'], + 'X_STEP': ['U1.30', 'A1.15'], + 'X_DIR': ['U1.31', 'A1.16'], + 'Y_STEP': ['U1.12', 'A2.15'], + 'Y_DIR': ['U1.13', 'A2.16'], + # motor plugs follow the driver's own pin order (as on the Arduino CNC shield): each coil on an adjacent pair + 'X_2B': ['A1.6', 'J3.1'], 'X_2A': ['A1.5', 'J3.2'], 'X_1A': ['A1.4', 'J3.3'], 'X_1B': ['A1.3', 'J3.4'], + 'Y_1B': ['A2.3', 'J4.1'], 'Y_1A': ['A2.4', 'J4.2'], 'Y_2A': ['A2.5', 'J4.3'], 'Y_2B': ['A2.6', 'J4.4'], + 'HOME_RAW': ['J5.2', 'R9.2', 'R10.1'], + 'HOME': ['R10.2', 'C13.1', 'D6.2', 'U1.6'], + 'HALL_RAW': ['J6.2', 'R11.2', 'R12.1'], + 'HALL': ['R12.2', 'C14.1', 'D7.2', 'U1.7'], + 'LED_DATA': ['U1.9', 'U4.2'], + 'LED_BUF': ['U4.4', 'R13.1'], + 'LED_DOUT': ['R13.2', 'J7.2'], + 'EXP_IO32': ['U1.8', 'J8.2'], + 'EXP_IO25': ['U1.10', 'J8.3'], + 'STAT': ['U1.24', 'R15.1'], + 'STAT_A': ['R15.2', 'D5.2'], + 'PWR_A': ['R14.2', 'D4.2'], +} + +# Pins intentionally left unconnected (get no-connect flags in the schematic) +NO_CONNECT = ['U1.4', 'U1.5', 'U1.14', 'U1.17', 'U1.18', 'U1.19', 'U1.20', 'U1.21', 'U1.22', 'U1.23', + 'U1.11', 'U1.26', 'U1.29', 'U1.32', 'U1.33', 'U1.36', 'U1.37', + 'U2.7', 'U2.8', 'U2.9', 'U2.10', 'U2.11', 'U2.12', 'U2.15', + 'U1.27', 'U1.28', 'J2.A8', 'J2.B8'] + +# ---------------------------------------------------------------- rules +# net class -> (track width, clearance) +NETCLASS = { + 'Default': (0.2, 0.16), + 'Power': (0.8, 0.2), + 'Motor': (0.5, 0.2), + 'Rail': (0.5, 0.2), +} +NET_TO_CLASS = {} +for n in ('GND', 'VIN_RAW', 'VIN_FUSED', '+12V'): + NET_TO_CLASS[n] = 'Power' +for n in ('X_1A', 'X_1B', 'X_2A', 'X_2B', 'Y_1A', 'Y_1B', 'Y_2A', 'Y_2B'): + NET_TO_CLASS[n] = 'Motor' +for n in ('+5V', '+5V_REG', 'VBUS', '+3V3'): + NET_TO_CLASS[n] = 'Rail' + +VIA = (0.6, 0.3) # diameter, drill + +# PCBWay standard process: 6/6 mil track/space, 0.3 mm min hole, 0.15 mm annular ring. +# Library footprints with smaller holes (the ESP32's thermal vias are 0.2 mm) are enlarged to fit. +MIN_DRILL = 0.3 +MIN_RING = 0.2 + +# ---------------------------------------------------------------- sourcing (PCBWay BOM) +# (refs, manufacturer, manufacturer part number, description, notes). Blank MPN = any brand to the description. +SOURCING = [ + (['U1'], 'Espressif', 'ESP32-WROOM-32E-N8', 'Wi-Fi + Bluetooth module, 8 MB flash, PCB antenna', ''), + (['U2'], 'WCH', 'CH340C', 'USB to UART bridge, SOIC-16', ''), + (['U3'], 'Diodes Incorporated', 'AP7361C-33E-13', 'LDO regulator 3.3 V 1 A, low dropout, SOT-223 (pin 1 IN, 2 GND/tab, 3 OUT)', 'Not an AMS1117: the pinout differs, no substitutes'), + (['U5'], 'STMicroelectronics', 'USBLC6-2SC6', 'USB ESD protection, 2 lines, SOT-23-6', ''), + (['U4'], 'Texas Instruments', 'SN74AHCT1G125DBVR', 'Single buffer, TTL-level input, SOT-23-5', ''), + (['PS1'], 'RECOM', 'R-78E5.0-1.0', 'Switching regulator 5 V 1 A, SIP-3', ''), + (['F1'], 'Bourns', 'MF-MSMF250/16X-2', 'PTC resettable fuse, 2.5 A hold, 5 A trip, 16 V, 1812', ''), + (['J1'], 'Same Sky (CUI Devices)', 'PJ-063AH', 'DC barrel jack, 2.0 mm pin, fits 5.5 x 2.1 mm plugs', ''), + (['J2'], 'Korean Hroparts Elec', 'TYPE-C-31-M-12', 'USB-C receptacle, USB 2.0, 16 pin', ''), + (['J3', 'J4'], 'JST', 'B4B-XH-A(LF)(SN)', 'XH header, 4 pin, 2.5 mm pitch, vertical', ''), + (['J5', 'J6', 'J7'], 'JST', 'B3B-XH-A(LF)(SN)', 'XH header, 3 pin, 2.5 mm pitch, vertical', ''), + (['J8'], 'Sullins', 'PRPC004SAAN-RC', 'Male pin header 1 x 4, 2.54 mm pitch, vertical', ''), + (['A1', 'A2'], 'Sullins', 'PPTC081LFBN-RC', 'Female pin header 1 x 8, 2.54 mm pitch, 8.5 mm tall', '2 headers per driver (4 total). Sockets only: the DRV8825 modules are supplied by me'), + (['D1', 'D2'], '', 'SS34', 'Schottky diode 40 V 3 A, SMA', 'Any brand'), + (['D3'], '', 'B5819W', 'Schottky diode 40 V 1 A, SOD-123', 'Any brand'), + (['D6', 'D7'], '', 'BAT54WS', 'Schottky diode 30 V 0.2 A, SOD-323', 'Any brand'), + (['D4'], '', '', 'LED green, 0603', 'Any brand'), + (['D5'], '', '', 'LED blue, 0603', 'Any brand'), + (['Q1', 'Q2'], 'onsemi', 'MMBT3904LT1G', 'NPN transistor 40 V 200 mA, SOT-23', 'Any MMBT3904 ok'), + (['SW1', 'SW2'], 'Omron', 'B3U-1000P', 'Tactile switch, SMD, 3 x 2.5 mm', ''), + (['C1', 'C2'], 'Panasonic', 'EEE-FK1V101GP', 'Aluminium electrolytic capacitor 100 uF 35 V, SMD 8 x 10.2 mm', ''), + (['C3', 'C4'], '', '', 'Ceramic capacitor 10 uF 25 V X5R, 1206', 'Any brand'), + (['C16', 'C17'], '', '', 'Ceramic capacitor 10 uF 50 V X7R, 1206', 'Any brand'), + (['C5', 'C9'], '', '', 'Ceramic capacitor 10 uF 16 V X5R, 0805', 'Any brand'), + (['C6'], '', '', 'Ceramic capacitor 22 uF 10 V X5R, 0805', 'Any brand'), + (['C7', 'C10', 'C13', 'C14', 'C15'], '', '', 'Ceramic capacitor 100 nF 50 V X7R, 0603', 'Any brand'), + (['C8'], '', '', 'Ceramic capacitor 1 uF 16 V X7R, 0603', 'Any brand'), + (['R1', 'R2'], '', '', 'Resistor 5.1 k 1%, 0603', 'Any brand'), + (['R3', 'R4', 'R5', 'R6', 'R8', 'R9', 'R11'], '', '', 'Resistor 10 k 1%, 0603', 'Any brand'), + (['R10', 'R12', 'R14', 'R15'], '', '', 'Resistor 1 k 1%, 0603', 'Any brand'), + (['R13'], '', '', 'Resistor 330 1%, 0603', 'Any brand'), +] +SOURCING_QTY = {('A1', 'A2'): 4} # BOM lines whose piece count differs from the designator count diff --git a/pcb/tools/fab.py b/pcb/tools/fab.py new file mode 100644 index 0000000..ca9b54d --- /dev/null +++ b/pcb/tools/fab.py @@ -0,0 +1,219 @@ +"""Build the PCBWay order files and copy the KiCad project + outputs into the repo. + +Run after route.py and sch.py. Writes to ~/kicad/sandtable-controller/fab (the KiCad snap can't +read inside ~/snap), then copies the results to ../ (the repo's pcb/ folder). +""" +import csv +import glob +import os +import shutil +import subprocess +import sys +import zipfile + +sys.path.insert(0, os.path.dirname(__file__)) +import design as D + +WORK = os.path.expanduser('~/kicad/sandtable-controller') +NAME = 'sandtable-controller' +PCB = os.path.join(WORK, NAME + '.kicad_pcb') +SCH = os.path.join(WORK, NAME + '.kicad_sch') +FAB = os.path.join(WORK, 'fab') +GERB = os.path.join(FAB, 'gerbers') +REPO = os.path.abspath(os.path.join(os.path.dirname(__file__), '..')) +CLI = 'kicad.kicad-cli' + + +def cli(*args): + r = subprocess.run([CLI, *args], capture_output=True, text=True) + if r.returncode != 0: + sys.exit(f'kicad-cli {" ".join(args[:3])} failed:\n{r.stdout}\n{r.stderr}') + + + + +def bom(pcb_text): + """PCBWay BOM straight from design.py (one line per sourcing group).""" + parts = {r: p for r, p in D.PARTS.items() if not r.startswith(('H', 'JP'))} # holes, solder jumpers + covered = [r for refs, *_ in D.SOURCING for r in refs] + dup = sorted({r for r in covered if covered.count(r) > 1}) + missing = sorted(set(parts) - set(covered)) + extra = sorted(set(covered) - set(parts)) + if dup or missing or extra: + sys.exit(f'SOURCING mismatch: duplicate {dup}, missing {missing}, unknown {extra}') + rows = [] + for i, (refs, mfr, mpn, desc, notes) in enumerate(D.SOURCING, 1): + fps = {parts[r][1].split(':')[1] for r in refs} + tht = any(pcb_text.count(f'(footprint "{parts[r][1]}"') and _is_tht(pcb_text, r) for r in refs) + qty = D.SOURCING_QTY.get(tuple(refs), len(refs)) + rows.append([i, ','.join(refs), qty, mfr, mpn, desc, ' / '.join(sorted(fps)), + 'Thru-Hole' if tht else 'SMD', notes]) + return rows + + +def _is_tht(pcb_text, ref): + # find the footprint block that carries this reference and read its (attr ...) + key = f'(property "Reference" "{ref}"' + i = pcb_text.find(key) + start = pcb_text.rfind('(footprint ', 0, i) + j = pcb_text.find('(attr ', start, i + 4000) + return pcb_text[j:j + 30].startswith('(attr through_hole') + + +def main(): + os.makedirs(GERB, exist_ok=True) + for f in glob.glob(os.path.join(GERB, '*')): + os.remove(f) + # Gerbers + drill, all relative to the board's bottom-left corner + cli('pcb', 'export', 'gerbers', '-o', GERB + '/', '-l', + 'F.Cu,B.Cu,F.Paste,F.SilkS,B.SilkS,F.Mask,B.Mask,Edge.Cuts', '--use-drill-file-origin', PCB) + cli('pcb', 'export', 'drill', '-o', GERB + '/', '--format', 'excellon', '--excellon-units', 'mm', + '--excellon-separate-th', '--drill-origin', 'plot', PCB) + zpath = os.path.join(FAB, NAME + '-gerbers.zip') + with zipfile.ZipFile(zpath, 'w', zipfile.ZIP_DEFLATED) as z: + for f in sorted(os.listdir(GERB)): + z.write(os.path.join(GERB, f), f) + print('gerbers:', ', '.join(sorted(os.listdir(GERB)))) + + # Centroid (pick and place) + raw = os.path.join(FAB, 'pos-raw.csv') + cli('pcb', 'export', 'pos', '-o', raw, '--format', 'csv', '--units', 'mm', '--side', 'both', + '--use-drill-file-origin', PCB) + pos = list(csv.DictReader(open(raw))) + os.remove(raw) + with open(os.path.join(FAB, 'centroid-pcbway.csv'), 'w', newline='') as f: + w = csv.writer(f) + w.writerow(['Designator', 'Mid X (mm)', 'Mid Y (mm)', 'Layer', 'Rotation', 'Value', 'Footprint']) + for r in sorted(pos, key=lambda r: (r['Ref'][0], int(''.join(c for c in r['Ref'] if c.isdigit())))): + w.writerow([r['Ref'], f"{float(r['PosX']):.3f}", f"{float(r['PosY']):.3f}", + 'Top' if r['Side'] == 'top' else 'Bottom', f"{float(r['Rot']) % 360:g}", r['Val'], r['Package']]) + print('centroid:', len(pos), 'parts') + + # BOM + pcb_text = open(PCB).read() + rows = bom(pcb_text) + with open(os.path.join(FAB, 'bom-pcbway.csv'), 'w', newline='') as f: + w = csv.writer(f) + w.writerow(['Item #', 'Designator', 'Qty', 'Manufacturer', 'Mfg Part #', 'Description / Value', + 'Package / Footprint', 'Type', 'Notes']) + w.writerows(rows) + print('bom:', len(rows), 'lines,', sum(r[2] for r in rows), 'pieces') + + # 3D model, renders, schematic PDF + cli('pcb', 'export', 'step', '-f', '-o', os.path.join(FAB, NAME + '.step'), '--subst-models', PCB) + cli('pcb', 'render', '-o', os.path.join(FAB, 'render-iso.png'), '--width', '1800', '--height', '1200', + '--quality', 'high', '--perspective', '--floor', '--rotate', '310,0,325', '--zoom', '0.9', PCB) + for side in ('top', 'bottom'): + cli('pcb', 'render', '-o', os.path.join(FAB, f'render-{side}.png'), '--side', side, + '--width', '1800', '--height', '1400', '--quality', 'high', PCB) + cli('sch', 'export', 'pdf', '-o', os.path.join(WORK, NAME + '-schematic.pdf'), SCH) + + # Assembly drawing (part outlines, references, polarity marks) + assembly_pdf(os.path.join(FAB, 'assembly-top.pdf')) + + # Copy into the repo: KiCad project, the PCBWay order folder, renders + kdir = os.path.join(REPO, 'kicad') + odir = os.path.join(REPO, 'pcbway-order') + rdir = os.path.join(REPO, 'renders') + for d in (kdir, odir, rdir): + os.makedirs(d, exist_ok=True) + for f in glob.glob(os.path.join(odir, '*')): + os.remove(f) + for f in (NAME + '.kicad_pro', NAME + '.kicad_pcb', NAME + '.kicad_sch', 'sym-lib-table', 'fp-lib-table', + 'sandtable.kicad_sym'): + shutil.copy2(os.path.join(WORK, f), kdir) + tag = f'{NAME}-v{D.VERSION}' + shutil.copy2(zpath, os.path.join(odir, f'1-gerbers-{tag}.zip')) + shutil.copy2(os.path.join(FAB, 'bom-pcbway.csv'), os.path.join(odir, f'2-bom-{tag}.csv')) + shutil.copy2(os.path.join(FAB, 'centroid-pcbway.csv'), os.path.join(odir, f'3-centroid-{tag}.csv')) + shutil.copy2(os.path.join(FAB, 'assembly-top.pdf'), os.path.join(odir, f'assembly-top-v{D.VERSION}.pdf')) + shutil.copy2(os.path.join(WORK, NAME + '-schematic.pdf'), os.path.join(odir, f'schematic-v{D.VERSION}.pdf')) + write_order_sheet(os.path.join(odir, 'ORDER.md'), tag, rows, pcb_text) + for f in ('render-iso.png', 'render-top.png', 'render-bottom.png'): + shutil.copy2(os.path.join(FAB, f), rdir) + shutil.copy2(os.path.join(FAB, NAME + '.step'), REPO) + shutil.copy2(os.path.join(WORK, NAME + '-schematic.pdf'), REPO) + print('order folder:', ', '.join(sorted(os.listdir(odir)))) + + +def assembly_pdf(out): + """KiCad plots on an A4 sheet with the board small in one corner: crop to the board and fit to A4.""" + full, crop = out + '.full.pdf', out + '.crop.pdf' + cli('pcb', 'export', 'pdf', '-o', full, '--mode-single', '-l', 'F.Fab,F.SilkS,Edge.Cuts', + '--ev', '--black-and-white', PCB) + mm, page_h, m = 72 / 25.4, 210.0, 5.0 # A4 landscape sheet, 5 mm margin + ox, oy = D.ORIGIN + box = [(ox - m) * mm, (page_h - (oy + D.BOARD_H + m)) * mm, (ox + D.BOARD_W + m) * mm, (page_h - (oy - m)) * mm] + gs = ['gs', '-q', '-sDEVICE=pdfwrite'] + subprocess.run(gs + ['-o', crop, '-c', '[/CropBox [' + ' '.join(f'{v:.1f}' for v in box) + '] /PAGES pdfmark', + '-f', full], check=True) + subprocess.run(gs + ['-o', out, '-dUseCropBox', '-dFIXEDMEDIA', '-dPDFFitPage', + '-dDEVICEWIDTHPOINTS=842', '-dDEVICEHEIGHTPOINTS=595', crop], check=True) + os.remove(full) + os.remove(crop) + + +def write_order_sheet(path, tag, rows, pcb_text): + smd = pcb_text.count('(attr smd') + tht_pieces = sum(r[2] for r in rows if r[7] == 'Thru-Hole') + tht_parts = sum(len(r[1].split(',')) for r in rows if r[7] == 'Thru-Hole') + text = f"""# PCBWay order: SandTable Controller v{D.VERSION} + +## Files + +| File | Where it goes | +|---|---| +| `1-gerbers-{tag}.zip` | PCB order: **Upload Gerber file** | +| `2-bom-{tag}.csv` | Assembly order: **BOM file** | +| `3-centroid-{tag}.csv` | Assembly order: **Centroid / pick-and-place file** | +| `assembly-top-v{D.VERSION}.pdf` | Attach if PCBWay asks for an assembly drawing | +| `schematic-v{D.VERSION}.pdf` | Attach if PCBWay asks for a schematic | + +## PCB settings + +| Setting | Value | +|---|---| +| Board type | Single pieces | +| Size | {D.BOARD_W:g} x {D.BOARD_H:g} mm | +| Quantity | 5 (the minimum) | +| Layers | 2 | +| Material | FR-4, TG130-140 | +| Thickness | 1.6 mm | +| Min track / spacing | 6/6 mil | +| Min hole size | 0.3 mm | +| Solder mask / silkscreen | any colour / white | +| Surface finish | HASL lead-free (or ENIG) | +| Via process | Tenting vias | +| Finished copper | 1 oz | +| Product No. | Specify a location (the back of the board has a "WayWayWay" marker for it) | + +## Assembly settings (PCB Assembly quote) + +| Setting | Value | +|---|---| +| Service | Turnkey (PCBWay buys the parts) | +| Assembly side | Top side only | +| Quantity | 1 or 2 (fewer than the 5 bare boards is fine) | +| Unique parts | {len(rows)} | +| SMD parts | {smd} | +| BGA / QFP parts | 0 | +| Through-hole parts | {tht_pieces} ({tht_parts} designators; each driver socket is 2 headers) | +| Accept alternatives | Yes, for lines marked "Any brand" | + +**Note for PCBWay** (paste into the comments box): + +> Please fit the female header sockets for A1 and A2 only. Do not supply the stepper driver modules; I will plug in my own. BOM lines marked "Any brand" may use any equivalent part to the description. U3 (AP7361C-33E) has a different pinout from AMS1117-type regulators, so please do not substitute it. Leave solder jumper JP1 open. C16 and C17 sit between the driver socket strips, under where the modules plug in; that is intended. Centroid coordinates are in mm, with the origin at the board's bottom-left corner. + +## When PCBWay sends their review +- Check the polarity of C1, C2 (electrolytic), D1-D3, D6, D7 (diodes) and D4, D5 (LEDs) against the + and bar marks in `assembly-top-v{D.VERSION}.pdf`. +- Check that the ESP32 (U1) antenna end sits at the board edge, over the copper-free area. +- Check that pin 1 of U2, U3, U4 and U5 is at the dot or triangle on the silkscreen. +- U3 is an AP7361C-33E, not an AMS1117: its pinout is different (pin 1 IN, pin 2 GND/tab, pin 3 OUT), so it must not be swapped for a 1117-type regulator. +- JP1 is a solder jumper (bare pads), not a part: leave it open. +""" + with open(path, 'w') as f: + f.write(text) + + +if __name__ == '__main__': + main() diff --git a/pcb/tools/kilib.py b/pcb/tools/kilib.py new file mode 100644 index 0000000..7e2fc41 --- /dev/null +++ b/pcb/tools/kilib.py @@ -0,0 +1,184 @@ +"""Load footprints and symbols from the installed KiCad libraries.""" +import math +import os +from sexpr import parse, find, findall, QStr + +KICAD = os.environ.get('KICAD_SHARE', '/snap/kicad/current/usr/share/kicad') +FP_DIR = os.path.join(KICAD, 'footprints') +SYM_DIR = os.path.join(KICAD, 'symbols') + + +def load_footprint(lib_id, min_drill=None, min_ring=0.2, solid_thermal_pads=False): + lib, name = lib_id.split(':', 1) + path = os.path.join(FP_DIR, lib + '.pretty', name + '.kicad_mod') + with open(path) as f: + fp = parse(f.read()) + if solid_thermal_pads: + _solidify_thermal_pads(fp) + if min_drill: + _enforce_min_drill(fp, min_drill, min_ring) + return fp + + +def _solidify_thermal_pads(fp): + """Remove plated holes that sit inside a cluster of same-numbered SMD pads (thermal vias in an + exposed pad) and add one copper-only pad over the cluster, so the copper stays continuous under + the solder-mask/paste windows but no hole is left in a pad. Fabs flag holes in pads (solder + wicks into them) and charge for resin filling.""" + import copy + pads = findall(fp, 'pad') + by_num = {} + for p in pads: + by_num.setdefault(str(p[1]), []).append(p) + for num, group in by_num.items(): + smd = [p for p in group if str(p[2]) == 'smd'] + tht = [p for p in group if str(p[2]) == 'thru_hole'] + if len(smd) < 2 or not tht: + continue + boxes = [] + for p in smd: + at, size = find(p, 'at'), find(p, 'size') + x, y, w, h = float(at[1]), float(at[2]), float(size[1]), float(size[2]) + boxes.append((x - w / 2, y - h / 2, x + w / 2, y + h / 2)) + x0, y0 = min(b[0] for b in boxes), min(b[1] for b in boxes) + x1, y1 = max(b[2] for b in boxes), max(b[3] for b in boxes) + inside = [p for p in tht if x0 - 0.5 <= float(find(p, 'at')[1]) <= x1 + 0.5 + and y0 - 0.5 <= float(find(p, 'at')[2]) <= y1 + 0.5] + if not inside: + continue + for p in inside: + fp.remove(p) + solid = copy.deepcopy(smd[0]) + solid[:] = [v for v in solid if not (isinstance(v, list) and v and v[0] in ('uuid', 'roundrect_rratio'))] + solid[3] = 'rect' + at, size, layers = find(solid, 'at'), find(solid, 'size'), find(solid, 'layers') + at[1:] = [f'{(x0 + x1) / 2:g}', f'{(y0 + y1) / 2:g}'] + size[1:] = [f'{x1 - x0:g}', f'{y1 - y0:g}'] + layers[1:] = [QStr('F.Cu')] + fp.insert(fp.index(smd[0]), solid) + + +def _enforce_min_drill(fp, min_drill, min_ring): + """Grow round plated holes below min_drill (and their copper ring) so the board fits the fab's process.""" + for p in findall(fp, 'pad'): + if str(p[2]) != 'thru_hole': + continue + drill = find(p, 'drill') + if not drill or len(drill) < 2 or isinstance(drill[1], list) or str(drill[1]) == 'oval': + continue + if float(drill[1]) >= min_drill - 1e-9: + continue + drill[1] = f'{min_drill:g}' + size = find(p, 'size') + need = min_drill + 2 * min_ring + for i in (1, 2): + if float(size[i]) < need: + size[i] = f'{need:g}' + + +def fp_pads(fp): + """Pads as dicts in footprint-local coords (KiCad: y down).""" + pads = [] + for p in findall(fp, 'pad'): + num = str(p[1]) + kind = p[2] # smd / thru_hole / np_thru_hole / connect + shape = p[3] + at = find(p, 'at') + x, y = float(at[1]), float(at[2]) + rot = float(at[3]) if len(at) > 3 else 0.0 + size = find(p, 'size') + w, h = float(size[1]), float(size[2]) + layers = [str(l) for l in find(p, 'layers')[1:]] + drill = find(p, 'drill') + d = None + if drill: + vals = [v for v in drill[1:] if not isinstance(v, list)] + if vals and vals[0] == 'oval': + d = (float(vals[1]), float(vals[2]) if len(vals) > 2 else float(vals[1])) + elif vals: + d = (float(vals[0]), float(vals[0])) + pads.append(dict(num=num, kind=kind, shape=shape, x=x, y=y, rot=rot, + w=w, h=h, layers=layers, drill=d, node=p)) + return pads + + +def fp_courtyard(fp): + """Bounding box (x0,y0,x1,y1) of the front/back courtyard lines/rects.""" + xs, ys = [], [] + for kind in ('fp_line', 'fp_rect', 'fp_circle', 'fp_arc', 'fp_poly'): + for g in findall(fp, kind): + layer = find(g, 'layer') + if not layer or 'CrtYd' not in str(layer[1]): + continue + for key in ('start', 'end', 'mid', 'center'): + pt = find(g, key) + if pt: + xs.append(float(pt[1])); ys.append(float(pt[2])) + pts = find(g, 'pts') + if pts: + for xy in findall(pts, 'xy'): + xs.append(float(xy[1])); ys.append(float(xy[2])) + if kind == 'fp_circle': + c = find(g, 'center'); e = find(g, 'end') + r = math.hypot(float(e[1]) - float(c[1]), float(e[2]) - float(c[2])) + xs += [float(c[1]) - r, float(c[1]) + r] + ys += [float(c[2]) - r, float(c[2]) + r] + if not xs: + return None + return (min(xs), min(ys), max(xs), max(ys)) + + +_symlib_cache = {} + + +def load_symbol(lib_id): + """Return the symbol definition list (with 'extends' resolved).""" + lib, name = lib_id.split(':', 1) + if lib not in _symlib_cache: + with open(os.path.join(SYM_DIR, lib + '.kicad_sym')) as f: + _symlib_cache[lib] = parse(f.read()) + root = _symlib_cache[lib] + syms = {str(s[1]): s for s in findall(root, 'symbol')} + s = syms[name] + ext = find(s, 'extends') + if ext: + base = load_symbol(lib + ':' + str(ext[1])) + # copy base, take name + properties from derived + import copy + merged = copy.deepcopy(base) + merged[1] = QStr(name) + # rename sub-units + for sub in findall(merged, 'symbol'): + sub[1] = QStr(str(sub[1]).replace(str(ext[1]), name, 1)) + # properties: inherited from the base, overridden/extended by the derived symbol + base_props = findall(merged, 'property') + merged = [x for x in merged if not (isinstance(x, list) and x and x[0] == 'property')] + derived = {str(p[1]): p for p in findall(s, 'property')} + props = [] + for p in base_props: + props.append(derived.pop(str(p[1]), p)) + props += list(derived.values()) + # insert properties after the symbol-level flags + idx = 2 + while idx < len(merged) and isinstance(merged[idx], list) and merged[idx][0] in ('pin_names', 'pin_numbers', 'exclude_from_sim', 'in_bom', 'on_board'): + idx += 1 + merged = merged[:idx] + props + merged[idx:] + return merged + return s + + +def sym_pins(sym): + """Pins (number, name, type, x, y, angle, length) in symbol coords (y up).""" + pins = [] + for unit in findall(sym, 'symbol'): + for p in findall(unit, 'pin'): + at = find(p, 'at') + length = float(find(p, 'length')[1]) + name = find(p, 'name') + number = find(p, 'number') + pins.append(dict(type=str(p[1]), style=str(p[2]), + x=float(at[1]), y=float(at[2]), angle=float(at[3]) if len(at) > 3 else 0.0, + length=length, name=str(name[1]), num=str(number[1]), + hidden=('hide' in [str(v) for v in p if not isinstance(v, list)]), + unit=str(unit[1]))) + return pins diff --git a/pcb/tools/place_check.py b/pcb/tools/place_check.py new file mode 100644 index 0000000..061bd74 --- /dev/null +++ b/pcb/tools/place_check.py @@ -0,0 +1,21 @@ +"""Build the board, report placement problems and write an unrouted PCB for a look.""" +import os +import sys + +sys.path.insert(0, os.path.dirname(__file__)) +import design as D +from board import build, check_placement, write_pcb, write_project, keepout_zone + +OUT = os.path.expanduser('~/kicad/sandtable-controller') + +parts = build() +probs = check_placement(parts) +print(f'{len(parts)} parts, {sum(len(v) for v in D.NETS.values())} net pins, {len(D.NETS)} nets') +for p in probs: + print(' !', p) +if not probs: + print(' placement OK') +zones = [keepout_zone('ANTENNA', 18.75, 56.9, 67.25, D.BOARD_H)] +write_pcb(os.path.join(OUT, 'sandtable-controller.kicad_pcb'), parts, zones=zones) +write_project(os.path.join(OUT, 'sandtable-controller.kicad_pro'), 'sandtable-controller') +print('wrote unrouted board') diff --git a/pcb/tools/place_new.py b/pcb/tools/place_new.py new file mode 100644 index 0000000..4782ff3 --- /dev/null +++ b/pcb/tools/place_new.py @@ -0,0 +1,67 @@ +"""Find free spots for parts added in a revision: a spiral search around each part's +preferred position (from design.py), trying 4 rotations, keeping courtyards apart, +inside the board and out of the antenna keep-out. Prints the positions to paste into design.py.""" +import math +import sys +import os + +sys.path.insert(0, os.path.dirname(__file__)) +import design as D +from board import build + +GAP = 0.25 # min gap between courtyards, mm +KEEPOUT = (18.75, 56.9, 67.25, D.BOARD_H) # ESP32 antenna +EDGE = 0.6 + + +def overlaps(a, b, gap=GAP): + return min(a[2], b[2]) - max(a[0], b[0]) > -gap and min(a[3], b[3]) - max(a[1], b[1]) > -gap + + +def legal(part, fixed): + for r in part.court_rects(): + if r[0] < EDGE or r[1] < EDGE or r[2] > D.BOARD_W - EDGE or r[3] > D.BOARD_H - EDGE: + return False + if overlaps(r, KEEPOUT, 0): + return False + if any(overlaps(r, f) for f in fixed): + return False + return True + + +def place(refs, parts): + fixed = [r for ref, p in parts.items() if ref not in refs for r in p.court_rects()] + out = {} + for ref in refs: + p = parts[ref] + x0, y0, rot0 = p.x, p.y, p.rot + best = None + for step in range(0, 80): # radius in 0.25 mm steps, up to 20 mm + rad = step * 0.25 + n = max(1, int(2 * math.pi * rad / 0.25)) + for i in range(n): + a = 2 * math.pi * i / n + x, y = round(x0 + rad * math.cos(a), 2), round(y0 + rad * math.sin(a), 2) + for rot in (rot0, (rot0 + 90) % 360, (rot0 + 180) % 360, (rot0 + 270) % 360): + p.x, p.y, p.rot = x, y, rot + if legal(p, fixed): + best = (x, y, rot, rad) + break + if best: + break + if best: + break + if not best: + print(f'{ref}: no spot within 20 mm') + p.x, p.y, p.rot = x0, y0, rot0 + continue + p.x, p.y, p.rot = best[:3] + fixed += p.court_rects() + out[ref] = best + print(f'{ref}: ({best[0]}, {best[1]}) rot {best[2]} moved {best[3]:.2f} mm from preferred') + return out + + +if __name__ == '__main__': + parts = build() + place(sys.argv[1:], parts) diff --git a/pcb/tools/pour.py b/pcb/tools/pour.py new file mode 100644 index 0000000..1583cf0 --- /dev/null +++ b/pcb/tools/pour.py @@ -0,0 +1,213 @@ +"""Ground pour: raster fill on the router grid -> fractured polygons for KiCad. + +Cells are squares of side G centred on grid points. A cell may be filled when no +foreign copper is within the pour clearance + half the cell diagonal; that radius +map already exists in the router (radius for a 0.2 mm track = 0.38 mm). +""" +from collections import deque + +import router as R + + +def fill_mask(rt, net, layer, r_map, open_cells=2): + k = rt.nid(net) + nx, ny = rt.nx, rt.ny + m = rt.maps[r_map][layer] + mask = bytearray(nx * ny) + for i in range(nx * ny): + v = m[i] + if v == -1 or v == k: + mask[i] = 1 + # morphological opening (erode then dilate, 4-neighbourhood) removes slivers + for _ in range(open_cells): + mask = _erode(mask, nx, ny) + for _ in range(open_cells): + mask = _dilate(mask, nx, ny, limit=m, k=k) + return mask + + +def _erode(mask, nx, ny): + out = bytearray(len(mask)) + for iy in range(1, ny - 1): + b = iy * nx + for ix in range(1, nx - 1): + i = b + ix + if mask[i] and mask[i - 1] and mask[i + 1] and mask[i - nx] and mask[i + nx]: + out[i] = 1 + return out + + +def _dilate(mask, nx, ny, limit, k): + out = bytearray(mask) + for iy in range(1, ny - 1): + b = iy * nx + for ix in range(1, nx - 1): + i = b + ix + if not mask[i] and (mask[i - 1] or mask[i + 1] or mask[i - nx] or mask[i + nx]): + v = limit[i] + if v == -1 or v == k: + out[i] = 1 + return out + + +def keep_connected(mask, nx, ny, anchors): + """Keep only 4-connected components that contain an anchor cell index.""" + keep = bytearray(len(mask)) + q = deque(i for i in anchors if mask[i]) + for i in q: + keep[i] = 1 + while q: + i = q.popleft() + for j in (i - 1, i + 1, i - nx, i + nx): + if 0 <= j < len(mask) and mask[j] and not keep[j]: + keep[j] = 1 + q.append(j) + return keep + + +def contours(mask, nx, ny): + """Boundary loops of the union of filled cells, in corner coordinates (cx, cy) + where cell (ix, iy) spans corners (ix..ix+1, iy..iy+1). Filled area on the left.""" + edges = {} + def add(a, b): + edges.setdefault(a, []).append(b) + for iy in range(ny): + b = iy * nx + for ix in range(nx): + if not mask[b + ix]: + continue + # neighbours (outside = empty) + up = iy > 0 and mask[b + ix - nx] + dn = iy < ny - 1 and mask[b + ix + nx] + lf = ix > 0 and mask[b + ix - 1] + rt_ = ix < nx - 1 and mask[b + ix + 1] + # traverse cell boundary counter-clockwise in screen coords (y down): filled on left + if not up: + add((ix + 1, iy), (ix, iy)) + if not lf: + add((ix, iy), (ix, iy + 1)) + if not dn: + add((ix, iy + 1), (ix + 1, iy + 1)) + if not rt_: + add((ix + 1, iy + 1), (ix + 1, iy)) + loops = [] + while edges: + start = next(iter(edges)) + loop = [start] + cur = start + prev_dir = None + while True: + outs = edges[cur] + if len(outs) == 1: + nxt = outs.pop() + else: + # pinch point: prefer the turn that keeps the filled region on the left (turn left first) + best = None + for cand in outs: + d = (cand[0] - cur[0], cand[1] - cur[1]) + if prev_dir is None: + best = cand + break + # left turn in y-down coords: (dx,dy) -> (dy,-dx) + if d == (prev_dir[1], -prev_dir[0]): + best = cand + break + if best is None: + best = outs[0] + outs.remove(best) + nxt = best + if not outs: + del edges[cur] + prev_dir = (nxt[0] - cur[0], nxt[1] - cur[1]) + cur = nxt + if cur == start: + break + loop.append(cur) + loops.append(_simplify(loop)) + return loops + + +def _simplify(loop): + out = [] + n = len(loop) + for i in range(n): + a, b, c = loop[i - 1], loop[i], loop[(i + 1) % n] + if (b[0] - a[0]) * (c[1] - b[1]) - (b[1] - a[1]) * (c[0] - b[0]) != 0: + out.append(b) + return out + + +def area2(loop): + s = 0 + for i in range(len(loop)): + x1, y1 = loop[i - 1] + x2, y2 = loop[i] + s += x1 * y2 - x2 * y1 + return s + + +def point_in(loop, x, y): + inside = False + n = len(loop) + for i in range(n): + x1, y1 = loop[i - 1] + x2, y2 = loop[i] + if (y1 > y) != (y2 > y): + xi = x1 + (y - y1) * (x2 - x1) / (y2 - y1) + if xi > x: + inside = not inside + return inside + + +def fracture(outer, holes): + """Merge holes into the outer ring with zero-width bridges (KiCad's fractured form). + Rectilinear integer loops. Holes are bridged rightwards to the nearest vertical edge.""" + ring = list(outer) + for hole in sorted(holes, key=lambda h: -max(p[0] for p in h)): + xh = max(p[0] for p in hole) + vi = min((i for i in range(len(hole)) if hole[i][0] == xh), key=lambda i: hole[i][1]) + V = hole[vi] + best = None + n = len(ring) + for i in range(n): + A, B = ring[i], ring[(i + 1) % n] + if A[0] == B[0] and A[0] > V[0] and min(A[1], B[1]) <= V[1] <= max(A[1], B[1]): + if best is None or A[0] < best[0]: + best = (A[0], i) + if best is None: + continue + x, i = best + P = (x, V[1]) + seq = hole[vi:] + hole[:vi] + ring = ring[:i + 1] + [P] + seq + [V, P] + ring[i + 1:] + out = [] + for p in ring: + if not out or out[-1] != p: + out.append(p) + if len(out) > 1 and out[0] == out[-1]: + out.pop() + return out + + +def polygons(mask, nx, ny): + loops = contours(mask, nx, ny) + outers, holes = [], [] + for lp in loops: + if len(lp) < 4: + continue + (outers if area2(lp) < 0 else holes).append(lp) + result = [] + owner = {} + for h in holes: + x, y = h[0][0] + 1e-3, h[0][1] + 1e-3 + cands = [o for o in outers if point_in(o, x, y)] + if cands: + owner[id(h)] = min(cands, key=lambda o: abs(area2(o))) + for o in outers: + hs = [h for h in holes if owner.get(id(h)) is o] + result.append(fracture(o, hs)) + return result + + +def to_mm(poly, G): + return [((cx - 0.5) * G, (cy - 0.5) * G) for (cx, cy) in poly] diff --git a/pcb/tools/route.py b/pcb/tools/route.py new file mode 100644 index 0000000..96e6059 --- /dev/null +++ b/pcb/tools/route.py @@ -0,0 +1,349 @@ +"""Place + route the SandTable controller and write the KiCad board.""" +import math +import os +import sys +import time + +sys.path.insert(0, os.path.dirname(__file__)) +import design as D +from board import build, check_placement, write_pcb, write_project, keepout_zone, text_node +import router as R + +OUT = os.path.expanduser('~/kicad/sandtable-controller') + +# routing width per net +WIDTH = {} +for n in D.NETS: + WIDTH[n] = 0.2 +for n in ('VIN_RAW', 'VIN_FUSED', '+12V'): + WIDTH[n] = 0.8 +WIDTH['GND'] = 0.5 +for n in ('X_1A', 'X_1B', 'X_2A', 'X_2B', 'Y_1A', 'Y_1B', 'Y_2A', 'Y_2B'): + WIDTH[n] = 0.5 +for n in ('VBUS', '+3V3'): + WIDTH[n] = 0.4 +for n in ('+5V', '+5V_REG'): # up to 1 A from the 5 V regulator (LED strip) + WIDTH[n] = 0.6 +FALLBACK = [0.3, 0.2] +# nets that must keep their full width: fail loudly instead of necking down +NO_FALLBACK = {'VIN_RAW', 'VIN_FUSED', '+12V', 'X_1A', 'X_1B', 'X_2A', 'X_2B', 'Y_1A', 'Y_1B', 'Y_2A', 'Y_2B'} +VIA_PAD_GAP = 0.2 # min copper gap between a via and any pad (keeps holes out of solder pads) + + +def radius(w): + return round(w / 2 + R.CLEAR + R.MARGIN, 3) + + +def via_radius(w): + return max(radius(w), round(R.VIA_D / 2 + R.CLEAR + R.MARGIN, 3)) + + +# Hand-routed USB-C escape (pads are on a 0.5 mm pitch). Board coords. +USB_X = 7.445 +PREROUTE = { + 'USB_DP': dict(tracks=[(USB_X, 43.75, 9.0, 43.75, 0.2, 0), (USB_X, 44.75, 9.0, 44.75, 0.2, 0), + (9.0, 43.75, 9.0, 44.75, 0.2, 0)], ports=[(9.0, 44.25, (0,))]), + 'USB_DM': dict(tracks=[(USB_X, 43.25, 6.15, 43.25, 0.2, 0), (USB_X, 44.25, 6.15, 44.25, 0.2, 0), + (6.15, 43.25, 6.15, 44.25, 0.2, 1)], + vias=[(6.15, 43.25), (6.15, 44.25)], ports=[(6.15, 43.75, (1,))]), + 'CC1': dict(tracks=[(USB_X, 42.75, 10.675, 42.75, 0.2, 0)]), + 'CC2': dict(tracks=[(USB_X, 45.75, 10.675, 45.75, 0.2, 0)]), + 'GND': dict(tracks=[(USB_X, 40.75, 9.3, 40.75, 0.4, 0), (USB_X, 47.25, 9.3, 47.25, 0.4, 0), + # driver VMOT ceramics (C16, C17): straight down from the socket's GND pin 7 + (22.86, 1.9, 22.86, 5.4, 0.5, 0), (43.86, 1.9, 43.86, 5.4, 0.5, 0), + # boxed-in GND pads get their own via: U5 pin 2 (between the USB lines), C13/C14 + (11.863, 49.5, 10.55, 49.5, 0.3, 0), + (61.775, 18.5, 61.775, 19.6, 0.3, 0), (61.775, 19.6, 61.775, 20.7, 0.3, 0)], + vias=[(10.55, 49.5), (61.775, 19.6)], + ports=[(9.3, 40.75, (0,)), (9.3, 47.25, (0,))]), + # ... and from the socket's VMOT pin 8 + '+12V': dict(tracks=[(20.32, 1.9, 20.32, 5.4, 0.8, 0), (41.32, 1.9, 41.32, 5.4, 0.8, 0)]), + 'VBUS': dict(tracks=[(USB_X, 41.55, 9.3, 41.55, 0.4, 0), (USB_X, 46.45, 9.3, 46.45, 0.4, 0)], + ports=[(9.3, 41.55, (0,)), (9.3, 46.45, (0,))]), +} + +ORDER_FIRST = ['USB_DP', 'USB_DM', 'CC1', 'CC2', 'VBUS', 'VIN_RAW', + # motor coils first, outermost lane first (J3.1 / J3.4 / J4.1 / J4.4), then the 12 V trunk + 'X_2B', 'X_1B', 'X_2A', 'X_1A', 'Y_1B', 'Y_2B', 'Y_1A', 'Y_2A', '+12V', + 'STAT', # short straight run under the LEDs; boxed in if left late + '+5V_REG', '+5V', '+3V3'] +ORDER_LAST = ['GND'] + + +def net_order(parts): + pads_by_net = {} + for p in parts.values(): + for pad in p.pads(): + if pad.net: + pads_by_net.setdefault(pad.net, []).append(pad) + rest = [n for n in D.NETS if n not in ORDER_FIRST and n not in ORDER_LAST] + + def span(n): + xs = [p.x for p in pads_by_net[n]] + ys = [p.y for p in pads_by_net[n]] + return (max(xs) - min(xs)) + (max(ys) - min(ys)) + rest.sort(key=span) + return ORDER_FIRST + rest + ORDER_LAST, pads_by_net + + +def seg_cells(x1, y1, x2, y2, L): + n = max(1, int(math.hypot(x2 - x1, y2 - y1) / (R.G / 2))) + out = set() + for i in range(n + 1): + t = i / n + ix, iy = int(round((x1 + t * (x2 - x1)) / R.G)), int(round((y1 + t * (y2 - y1)) / R.G)) + out.add((L, ix, iy)) + return out + + +def route_all(parts, order, pads_by_net, verbose=True): + widths = set(WIDTH.values()) | set(FALLBACK) | {0.4} + radii = {radius(w) for w in widths} | {via_radius(w) for w in widths} + rt = R.Router(D.BOARD_W, D.BOARD_H, radii) + rt.block_edges() + rt.block_rect(18.75, 56.9, 67.25, D.BOARD_H) # ESP32 antenna keep-out + for p in parts.values(): + for pad in p.pads(): + rt.add_pad(pad) + rt.keep_vias_off_pad(pad, VIA_PAD_GAP) + pre_components = {} # net -> list of cell sets (each one electrically connected) + for net, pr in PREROUTE.items(): + own = rt.net_cells.setdefault(net, set()) + items = [] # (cells, endpoints) + for (x, y) in pr.get('vias', []): + rt.add_via(x, y, net) + ix, iy = rt.cell(x, y) + items.append(({(0, ix, iy), (1, ix, iy)}, {(round(x, 3), round(y, 3))})) + for (x1, y1, x2, y2, w, L) in pr['tracks']: + rt.add_track(x1, y1, x2, y2, w, L, net) + items.append((seg_cells(x1, y1, x2, y2, L), {(round(x1, 3), round(y1, 3)), (round(x2, 3), round(y2, 3))})) + # union items sharing an endpoint + comps = [] + for cells, ends in items: + merged = [c for c in comps if c[1] & ends] + for c in merged: + comps.remove(c) + cells = cells | c[0] + ends = ends | c[1] + comps.append((cells, ends)) + ports = pr.get('ports') + pc = [] + for c in comps: + own |= c[0] + if ports: + pcells = set() + for (px, py, Ls) in ports: + ix, iy = rt.cell(px, py) + if any((L, ix, iy) in c[0] for L in (0, 1)) or any(abs(px - e[0]) < 1e-6 and abs(py - e[1]) < 1e-6 for e in c[1]): + for L in Ls: + pcells.add((L, ix, iy)) + pc.append((c[0], pcells if pcells else None)) + else: + pc.append((c[0], None)) + pre_components[net] = pc + + failures = [] + stats = {} + t0 = time.time() + for net in order: + pads = pads_by_net[net] + w0 = WIDTH[net] + # terminals: pre-routed components (with the pads they touch) and the remaining pads + terms = [] + used = set() + for comp, port_cells in pre_components.get(net, []): + cells = set(comp) + pts = [] + for p in pads: + pc = rt.pad_cells(p) + if pc & comp: + cells |= pc + used.add(id(p)) + pts.append((p.x, p.y)) + if port_cells: + cells = set(port_cells) + c = next(iter(port_cells)) + pts = [(c[1] * R.G, c[2] * R.G)] + if not pts: + c = next(iter(comp)) + pts = [(c[1] * R.G, c[2] * R.G)] + terms.append((cells, pts[0][0], pts[0][1], f'pre:{net}')) + for p in pads: + if id(p) not in used: + terms.append((rt.pad_cells(p), p.x, p.y, f'{p.ref}.{p.num}')) + first = min(terms, key=lambda t: (t[1] + t[2])) + tree = set(first[0]) + remaining = [t for t in terms if t is not first] + nseg = nvia = 0 + while remaining: + sample = list(tree)[::max(1, len(tree) // 400)] + + def dist_to_tree(t): + return min(abs(t[1] - c[1] * R.G) + abs(t[2] - c[2] * R.G) for c in sample) + t = min(remaining, key=dist_to_tree) + targets = t[0] + remaining.remove(t) + if targets & tree: # already connected (pads touching / overlapping) + tree |= targets + continue + path = None + tries = [w0] if net in NO_FALLBACK else [w0] + [fw for fw in FALLBACK if fw < w0] + for w in tries: + path = rt.search(net, radius(w), via_radius(w), tree, targets, t[1], t[2]) + if path: + break + if not path: + failures.append((net, t[3])) + continue + a, b = rt.commit_path(net, path, w) + nseg += a; nvia += b + tree |= set(path) | targets + rt.net_cells[net] |= targets + stats[net] = (nseg, nvia) + if verbose: + print(f' {net:10s} pads={len(pads):2d} segs={nseg:3d} vias={nvia:2d} t={time.time() - t0:6.1f}s', flush=True) + return rt, failures + + +def stitch_vias(rt, pitch=4.0, dense=((33.0, 37.0, 53.5, 56.5, 2.0),)): + """GND stitching vias: one per pitch x pitch block wherever a via fits and the ground pour + reaches it (connected) on both layers. Denser blocks under the ESP32 module.""" + import pour + r_map = radius(0.2) + k = rt.nid('GND') + nx = rt.nx + keep = {} + for L in (0, 1): + mask = pour.fill_mask(rt, 'GND', L, r_map, open_cells=2) + anchors = [iy * nx + ix for (cl, ix, iy) in rt.net_cells.get('GND', ()) if cl == L] + anchors += [rt.cell(x, y)[1] * nx + rt.cell(x, y)[0] for (x, y, n) in rt.vias if n == 'GND'] + keep[L] = pour.keep_connected(mask, nx, rt.ny, anchors) + mv = rt.maps[via_radius(0.2)] + gnd_vias = [(x, y) for (x, y, n) in rt.vias if n == 'GND'] + + def ok(ix, iy, min_gap): + if ix < 1 or iy < 1 or ix >= nx - 1 or iy >= rt.ny - 1: + return False + i = iy * nx + ix + if rt.no_via[i] or not (keep[0][i] and keep[1][i]): + return False + if any(mv[L][i] not in (-1, k) for L in (0, 1)): + return False + x, y = rt.xy(ix, iy) + return all(math.hypot(x - vx, y - vy) >= min_gap for vx, vy in gnd_vias) + + def blocks(x0, y0, x1, y1, p): + s = int(round(p / R.G)) + for by in range(int(y0 / R.G), int(y1 / R.G), s): + for bx in range(int(x0 / R.G), int(x1 / R.G), s): + yield bx, by, s + + added = 0 + passes = [(0.0, 0.0, D.BOARD_W, D.BOARD_H, pitch)] + list(dense) + for (x0, y0, x1, y1, p) in passes: + for bx, by, s in blocks(x0, y0, x1, y1, p): + cx, cy = bx + s // 2, by + s // 2 + cands = sorted(((ix, iy) for iy in range(by, by + s) for ix in range(bx, bx + s)), + key=lambda c: (c[0] - cx) ** 2 + (c[1] - cy) ** 2) + for ix, iy in cands: + if ok(ix, iy, p * 0.6): + x, y = rt.xy(ix, iy) + rt.add_via(round(x, 3), round(y, 3), 'GND') + gnd_vias.append((x, y)) + added += 1 + break + print(f' stitching vias: {added}') + return added + + +def gnd_pours(rt, parts): + """GND copper pour on both layers, filled by pour.py (clearance 0.3 mm).""" + import pour + from board import uid, fmt, net_list + from sexpr import QStr + OX, OY = D.ORIGIN + k = rt.nid('GND') + r_map = radius(0.2) # 0.38 mm: 0.3 pour clearance + half cell diagonal + net_ids = net_list() + zones = [] + for L, lname in ((1, 'B.Cu'), (0, 'F.Cu')): + mask = pour.fill_mask(rt, 'GND', L, r_map, open_cells=2) + # anchors: GND copper cells on this layer (pads, tracks, vias) + anchors = [] + for (cl, ix, iy) in rt.net_cells.get('GND', ()): + if cl == L: + anchors.append(iy * rt.nx + ix) + for (x, y, n) in rt.vias: + if n == 'GND': + ix, iy = rt.cell(x, y) + anchors.append(iy * rt.nx + ix) + keep = pour.keep_connected(mask, rt.nx, rt.ny, anchors) + polys = pour.polygons(keep, rt.nx, rt.ny) + filled = [] + for poly in polys: + pts = pour.to_mm(poly, R.G) + filled.append(['filled_polygon', ['layer', QStr(lname)], + ['pts'] + [['xy', fmt(x + OX), fmt(y + OY)] for x, y in pts]]) + cells = sum(keep) + print(f' GND pour {lname}: {len(polys)} islands, {cells * R.G * R.G:.0f} mm2') + inset = 0.25 + outline = [(inset, inset), (D.BOARD_W - inset, inset), (D.BOARD_W - inset, D.BOARD_H - inset), (inset, D.BOARD_H - inset)] + zones.append(['zone', ['net', str(net_ids['GND'])], ['net_name', QStr('/GND')], ['layer', QStr(lname)], + ['uuid', QStr(uid('gndzone', lname))], ['name', QStr('GND_' + lname[0])], + ['hatch', 'edge', '0.5'], ['connect_pads', 'yes', ['clearance', '0.3']], + ['min_thickness', '0.25'], ['filled_areas_thickness', 'no'], + ['fill', 'yes', ['thermal_gap', '0.5'], ['thermal_bridge_width', '0.5']], + ['polygon', ['pts'] + [['xy', fmt(x + OX), fmt(y + OY)] for x, y in outline]]] + filled) + return zones + + +def silk_labels(): + T = [] + T.append(text_node('SANDTABLE', 53.8, 27.6, 'F.SilkS', size=1.1, bold=True)) + T.append(text_node(f'CTRL v{D.VERSION}', 53.8, 29.6, 'F.SilkS', size=1.0)) + for txt, x, y, ang in (('SPIN', 4.5, 15.2, 0), ('12V', 2.4, 17.6, 0), ('USB', 2.2, 37.3, 0), + ('ARM', 71.0, 7.15, 90), ('HOME', 71.0, 21.0, 90), ('HALL', 71.4, 33.6, 90), + ('LED', 71.0, 43.2, 90), ('EXP', 74.6, 55.8, 90)): + T.append(text_node(txt, x, y, 'F.SilkS', size=0.9, angle=ang)) + # driver orientation: match the pin names printed on the DRV8825 module + for x1 in (38.1, 59.1): # A1 / A2 pin-1 x; pins step 2.54 mm to the left + T.append(text_node('VMOT', x1 - 7 * 2.54, 3.5, 'F.SilkS', size=0.8)) + T.append(text_node('EN', x1 - 7 * 2.54, 13.0, 'F.SilkS', size=0.8)) + T.append(text_node('DIR', x1, 13.0, 'F.SilkS', size=0.8)) + # back side: name plate + T.append(text_node(f'SANDTABLE CONTROLLER v{D.VERSION}', 40.0, 30.0, 'B.SilkS', size=1.6, bold=True)) + T.append(text_node('ESP32 + 2x DRV8825 | 12V in | FluidNC', 40.0, 33.0, 'B.SilkS', size=1.0)) + T.append(text_node('lazypugs 2026', 40.0, 35.5, 'B.SilkS', size=1.0)) + # JP1 (under the theta driver): bridge only for A4988 modules + jx, jy = D.PARTS['JP1'][3], D.PARTS['JP1'][4] + T.append(text_node('A4988 ONLY', jx, jy + 1.9, 'F.SilkS', size=0.7)) + T.append(text_node('WayWayWay', 40.0, 38.0, 'B.SilkS', size=1.0)) # PCBWay prints its order number here + return T + + +def main(): + parts = build() + probs = check_placement(parts) + for p in probs: + print(' !', p) + order, pads_by_net = net_order(parts) + rt, failures = route_all(parts, order, pads_by_net) + print(f'tracks={len(rt.tracks)} vias={len(rt.vias)} failures={len(failures)}') + crowded = [(x, y, pd.ref, pd.num) for (x, y, n) in rt.vias for p in parts.values() for pd in p.pads() + if pd.layers and pd.kind != 'np_thru_hole' and pd.dist(x, y) < R.VIA_D / 2 + VIA_PAD_GAP - 1e-6] + print(f'vias closer than {VIA_PAD_GAP} mm to a pad: {len(crowded)}', crowded[:6]) + for f in failures: + print(' FAILED', f) + stitch_vias(rt) + tracks = [(x1, y1, x2, y2, w, L, n) for (x1, y1, x2, y2, w, L, n) in rt.tracks] + zones = [keepout_zone('ANTENNA', 18.75, 56.9, 67.25, D.BOARD_H)] + zones += gnd_pours(rt, parts) + os.makedirs(OUT, exist_ok=True) + write_pcb(os.path.join(OUT, 'sandtable-controller.kicad_pcb'), parts, tracks=tracks, vias=rt.vias, + zones=zones, texts=silk_labels()) + write_project(os.path.join(OUT, 'sandtable-controller.kicad_pro'), 'sandtable-controller') + return failures + + +if __name__ == '__main__': + main() diff --git a/pcb/tools/router.py b/pcb/tools/router.py new file mode 100644 index 0000000..daa02d9 --- /dev/null +++ b/pcb/tools/router.py @@ -0,0 +1,289 @@ +"""A small two-layer grid router (A* with turn penalties, vias, per-net widths). + +Obstacle model: for every distinct "inflation radius" R (track half-width + +clearance + discretisation margin) we keep, per layer, an owner map: + -1 = free, k >= 0 = only copper of net k is within R, -2 = blocked for everyone. +A cell is usable by net k iff its owner is -1 or k. +""" +import heapq +import math +from array import array + +G = 0.1 # grid pitch, mm +CLEAR = 0.2 # copper-copper clearance used by the router (DRC default is 0.15) +EDGE = 0.35 # copper-to-board-edge clearance +MARGIN = 0.08 # discretisation safety margin +VIA_D = 0.6 +COST_STEP = 10 +COST_DIAG = 14 +COST_VIA = 90 +COST_TURN = 4 +COST_BCU = 1 # tiny extra per step on the bottom layer (keeps B.Cu freer for GND) + +DIRS = [(1, 0), (1, 1), (0, 1), (-1, 1), (-1, 0), (-1, -1), (0, -1), (1, -1)] + + +def seg_dist(px, py, x1, y1, x2, y2): + dx, dy = x2 - x1, y2 - y1 + L2 = dx * dx + dy * dy + if L2 == 0: + return math.hypot(px - x1, py - y1) + t = max(0.0, min(1.0, ((px - x1) * dx + (py - y1) * dy) / L2)) + return math.hypot(px - (x1 + t * dx), py - (y1 + t * dy)) + + +class Router: + def __init__(self, width, height, radii): + self.W, self.H = width, height + self.nx = int(round(width / G)) + 1 + self.ny = int(round(height / G)) + 1 + self.radii = sorted(set(round(r, 3) for r in radii)) + n = self.nx * self.ny + self.maps = {r: [array('h', [-1]) * n, array('h', [-1]) * n] for r in self.radii} + self.net_index = {} + self.objects = [] # (kind, data, net) for re-rasterising + self.tracks = [] # (x1,y1,x2,y2,w,layer,net) + self.vias = [] # (x,y,net) + self.net_cells = {} # net -> set of (layer, ix, iy) owned copper cells (tree) + self.no_via = bytearray(n) # 1 = a via centred here would touch or crowd a pad (any net) + + # ------------------------------------------------------------ helpers + def nid(self, net): + if net is None: + return -2 + if net not in self.net_index: + self.net_index[net] = len(self.net_index) + return self.net_index[net] + + def cell(self, x, y): + return int(round(x / G)), int(round(y / G)) + + def xy(self, ix, iy): + return ix * G, iy * G + + def _mark(self, layer_ids, net, x0, y0, x1, y1, inside): + """inside(px,py,R) -> True if cell centre is within R of the object.""" + k = self.nid(net) + for r in self.radii: + ix0 = max(0, int((x0 - r) / G) - 1) + iy0 = max(0, int((y0 - r) / G) - 1) + ix1 = min(self.nx - 1, int((x1 + r) / G) + 1) + iy1 = min(self.ny - 1, int((y1 + r) / G) + 1) + for L in layer_ids: + m = self.maps[r][L] + for iy in range(iy0, iy1 + 1): + py = iy * G + base = iy * self.nx + for ix in range(ix0, ix1 + 1): + idx = base + ix + v = m[idx] + if v == -2 or v == k: + continue + if inside(ix * G, py, r): + m[idx] = k if v == -1 else -2 + + def add_pad(self, pad): + layers = [0 if l == 'F.Cu' else 1 for l in pad.layers] + if pad.kind == 'np_thru_hole': + layers = [0, 1] + hole = pad.drill[0] / 2 if pad.drill else pad.hx + cx, cy = pad.x, pad.y + self._mark(layers, None, cx - hole, cy - hole, cx + hole, cy + hole, + lambda px, py, r: math.hypot(px - cx, py - cy) < hole + r) + return + net = pad.net + self._mark(layers, net, pad.x - pad.hx, pad.y - pad.hy, pad.x + pad.hx, pad.y + pad.hy, + lambda px, py, r: pad.dist(px, py) < r) + # drilled THT pads also block the other layer for different nets via the copper ring (both layers) + + def keep_vias_off_pad(self, pad, gap): + """Forbid via centres within (via radius + gap) of this pad's copper, whatever its net. + A via in or touching a pad lets solder drain into the hole during assembly.""" + if pad.kind == 'np_thru_hole' or not pad.layers: + return + r = VIA_D / 2 + gap + ix0, iy0 = max(0, int((pad.x - pad.hx - r) / G) - 1), max(0, int((pad.y - pad.hy - r) / G) - 1) + ix1, iy1 = min(self.nx - 1, int((pad.x + pad.hx + r) / G) + 1), min(self.ny - 1, int((pad.y + pad.hy + r) / G) + 1) + for iy in range(iy0, iy1 + 1): + for ix in range(ix0, ix1 + 1): + if pad.dist(ix * G, iy * G) < r: + self.no_via[iy * self.nx + ix] = 1 + + def add_track(self, x1, y1, x2, y2, w, layer, net): + hw = w / 2 + self._mark([layer], net, min(x1, x2) - hw, min(y1, y2) - hw, max(x1, x2) + hw, max(y1, y2) + hw, + lambda px, py, r: seg_dist(px, py, x1, y1, x2, y2) < hw + r) + self.tracks.append((x1, y1, x2, y2, w, 'F.Cu' if layer == 0 else 'B.Cu', net)) + + def add_via(self, x, y, net): + rv = VIA_D / 2 + self._mark([0, 1], net, x - rv, y - rv, x + rv, y + rv, + lambda px, py, r: math.hypot(px - x, py - y) < rv + r) + self.vias.append((x, y, net)) + + def block_edges(self): + for r in self.radii: + lim = EDGE + r - CLEAR # r already includes clearance; edge rule replaces it + n = int(math.ceil(lim / G)) # cells with index < n (or > max-n) are too close + for L in (0, 1): + m = self.maps[r][L] + for iy in range(self.ny): + base = iy * self.nx + if iy < n or iy > self.ny - 1 - n: + for ix in range(self.nx): + m[base + ix] = -2 + else: + for ix in list(range(n)) + list(range(self.nx - n, self.nx)): + m[base + ix] = -2 + + def block_rect(self, x0, y0, x1, y1): + """Keep-out: nothing may enter (tracks are inflated by their radius).""" + for r in self.radii: + for L in (0, 1): + m = self.maps[r][L] + hw = r - CLEAR - MARGIN # track half width + for iy in range(max(0, int((y0 - hw) / G)), min(self.ny, int((y1 + hw) / G) + 2)): + for ix in range(max(0, int((x0 - hw) / G)), min(self.nx, int((x1 + hw) / G) + 2)): + px, py = ix * G, iy * G + if x0 - hw - CLEAR <= px <= x1 + hw + CLEAR and y0 - hw - CLEAR <= py <= y1 + hw + CLEAR: + m[iy * self.nx + ix] = -2 + + # ------------------------------------------------------------ search + def pad_cells(self, pad): + layers = [0 if l == 'F.Cu' else 1 for l in pad.layers] + cells = set() + ix0, iy0 = int((pad.x - pad.hx) / G), int((pad.y - pad.hy) / G) + ix1, iy1 = int((pad.x + pad.hx) / G) + 1, int((pad.y + pad.hy) / G) + 1 + for iy in range(iy0, iy1 + 1): + for ix in range(ix0, ix1 + 1): + if pad.dist(ix * G, iy * G) <= 1e-9: + for L in layers: + cells.add((L, ix, iy)) + if not cells: + ix, iy = self.cell(pad.x, pad.y) + for L in layers: + cells.add((L, ix, iy)) + return cells + + def search(self, net, r_track, r_via, sources, targets, tx, ty, max_expand=1500000): + k = self.nid(net) + nx = self.nx + mt = self.maps[r_track] + mv = self.maps[r_via] + own = self.net_cells.setdefault(net, set()) + tset = targets + txi, tyi = tx / G, ty / G + + def free(L, ix, iy): + if ix < 0 or iy < 0 or ix >= nx or iy >= self.ny: + return False + if (L, ix, iy) in tset: + return True + v = mt[L][iy * nx + ix] + return v == -1 or v == k + + def via_ok(ix, iy): + if self.no_via[iy * nx + ix]: + return False + for L in (0, 1): + v = mv[L][iy * nx + ix] + if not (v == -1 or v == k): + return False + return True + + def h(ix, iy): + dx, dy = abs(ix - txi), abs(iy - tyi) + return int(COST_STEP * (max(dx, dy) - min(dx, dy)) + COST_DIAG * min(dx, dy)) + + openh = [] + g = {} + came = {} + for (L, ix, iy) in sources: + s = (L, ix, iy, 8) + g[s] = 0 + heapq.heappush(openh, (h(ix, iy), 0, s)) + expanded = 0 + while openh: + f, gc, s = heapq.heappop(openh) + if g.get(s, 1 << 60) < gc: + continue + L, ix, iy, d = s + if (L, ix, iy) in tset: + path = [(L, ix, iy)] + while s in came: + s = came[s] + path.append(s[:3]) + path.reverse() + return path + expanded += 1 + if expanded > max_expand: + return None + for nd, (dx, dy) in enumerate(DIRS): + jx, jy = ix + dx, iy + dy + if not free(L, jx, jy): + continue + if dx and dy: + # don't cut corners between two blocked orthogonal neighbours + if not (free(L, ix + dx, iy) or free(L, ix, iy + dy)): + continue + step = COST_DIAG + else: + step = COST_STEP + if d != 8 and nd != d: + step += COST_TURN * (1 if (nd - d) % 8 in (1, 7) else 3) + if L == 1: + step += COST_BCU + ns = (L, jx, jy, nd) + ng = gc + step + if ng < g.get(ns, 1 << 60): + g[ns] = ng + came[ns] = s + heapq.heappush(openh, (ng + h(jx, jy), ng, ns)) + # via + if via_ok(ix, iy): + ns = (1 - L, ix, iy, 8) + ng = gc + COST_VIA + if ng < g.get(ns, 1 << 60) and free(1 - L, ix, iy): + g[ns] = ng + came[ns] = s + heapq.heappush(openh, (ng + h(ix, iy), ng, ns)) + return None + + def commit_path(self, net, path, w, start_xy=None, end_xy=None): + """Turn a cell path into merged segments + vias, add them as obstacles.""" + own = self.net_cells.setdefault(net, set()) + pts = [] # (layer, x, y) + for (L, ix, iy) in path: + pts.append((L, ix * G, iy * G)) + own.add((L, ix, iy)) + segs = [] + vias = [] + run = [pts[0]] + for p in pts[1:]: + if p[0] != run[-1][0]: + vias.append((p[1], p[2])) + if len(run) > 1: + segs.append(run) + run = [p] + else: + run.append(p) + if len(run) > 1: + segs.append(run) + out = [] + for run in segs: + # merge collinear points + simp = [run[0]] + for i in range(1, len(run) - 1): + a, b, c = simp[-1], run[i], run[i + 1] + d1 = (round((b[1] - a[1]) / G), round((b[2] - a[2]) / G)) + d2 = (round((c[1] - b[1]) / G), round((c[2] - b[2]) / G)) + if d1[0] * d2[1] - d1[1] * d2[0] != 0 or d1[0] * d2[0] + d1[1] * d2[1] < 0: + simp.append(b) + simp.append(run[-1]) + for a, b in zip(simp, simp[1:]): + out.append((a[1], a[2], b[1], b[2], w, a[0], net)) + for (x, y) in vias: + self.add_via(x, y, net) + for (x1, y1, x2, y2, ww, L, n) in out: + self.add_track(x1, y1, x2, y2, ww, L, n) + return len(out), len(vias) diff --git a/pcb/tools/sch.py b/pcb/tools/sch.py new file mode 100644 index 0000000..e7d4b0f --- /dev/null +++ b/pcb/tools/sch.py @@ -0,0 +1,271 @@ +"""Generate the KiCad schematic from design.py (label-style: every pin gets a stub + net label).""" +import copy +import os +import sys + +sys.path.insert(0, os.path.dirname(__file__)) +import design as D +from board import uid, fmt +from kilib import load_symbol, sym_pins +from sexpr import QStr, dumps, find, findall + +OUT = os.path.expanduser('~/kicad/sandtable-controller') +NAME = 'sandtable-controller' +ROOT = uid('rootsheet') +STUB = 2.54 +LIBNICK = 'SandTable' + +# custom symbols kept in the project library +CUSTOM = { + 'Driver_Motor:Pololu_Breakout_A4988': ('DRV8825_StepStick', { + '2': ('VDD/~{FAULT}', 'passive'), '3': ('A2', None), '4': ('A1', None), '5': ('B1', None), '6': ('B2', None), + '9': ('~{EN}', None), '10': ('M0', None), '11': ('M1', None), '12': ('M2', None), + '13': ('~{RST}', None), '14': ('~{SLP}', None)}), + 'Interface_USB:CH340C': ('CH340C_3V3', {'4': ('V3', 'passive')}), +} + +GROUPS = [ + ('POWER INPUT 12V -> 5V', (12.7, 25.4, 287.02, 104.14), ['J1', 'F1', 'D1', 'C3', 'PS1', 'C4', 'D2', '#FLG1', '#FLG2', '#FLG3']), + ('3.3V', (294.64, 25.4, 398.78, 104.14), ['U3', 'C5', 'C6']), + ('SENSORS / LED / EXPANSION', (406.4, 25.4, 579.12, 238.76), ['J5', 'R9', 'R10', 'C13', 'D6', 'J6', 'R11', 'R12', 'C14', 'D7', 'U4', 'C15', 'R13', 'J7', 'J8']), + ('USB-C + USB-SERIAL + AUTO-RESET', (12.7, 116.84, 190.5, 264.16), ['J2', 'U5', 'R1', 'R2', 'D3', 'U2', 'C7', 'Q1', 'R3', 'Q2', 'R4', '#FLG4']), + ('ESP32', (198.12, 116.84, 398.78, 264.16), ['U1', 'C9', 'C10', 'R5', 'C8', 'SW1', 'R6', 'SW2', 'R8', 'R14', 'D4', 'R15', 'D5']), + ('STEPPER DRIVERS (DRV8825, 1/32 step: M0-M2, RST, SLP tied high; JP1 bridged only for A4988)', (12.7, 276.86, 398.78, 406.4), ['A1', 'C1', 'C16', 'J3', 'A2', 'C2', 'C17', 'J4', 'JP1']), + ('MOUNTING (Arduino Uno pattern)', (406.4, 251.46, 579.12, 299.72), ['H1', 'H2', 'H3', 'H4']), +] +FLAGS = {'#FLG1': 'GND', '#FLG2': '+12V', '#FLG3': '+5V', '#FLG4': 'VBUS'} + + +def snap(v, g=2.54): + return round(v / g) * g + + +def symbol_def(lib_id): + """(lib_id used in the schematic, symbol definition list).""" + sym = copy.deepcopy(load_symbol(lib_id)) + lib_name = str(sym[1]) + if lib_id in CUSTOM: + new, renames = CUSTOM[lib_id] + for unit in findall(sym, 'symbol'): + unit[1] = QStr(str(unit[1]).replace(lib_name, new, 1)) + for p in findall(unit, 'pin'): + num = str(find(p, 'number')[1]) + if num in renames: + nm, typ = renames[num] + find(p, 'name')[1] = QStr(nm) + if typ: + p[1] = typ + full = f'{LIBNICK}:{new}' + sym[1] = QStr(full) + return full, sym, new + sym[1] = QStr(lib_id) + return lib_id, sym, None + + +def bbox(sym): + xs, ys = [], [] + for unit in findall(sym, 'symbol'): + for g in unit: + if not isinstance(g, list): + continue + if g[0] == 'rectangle': + s, e = find(g, 'start'), find(g, 'end') + xs += [float(s[1]), float(e[1])]; ys += [float(s[2]), float(e[2])] + elif g[0] in ('polyline',): + for xy in findall(find(g, 'pts'), 'xy'): + xs.append(float(xy[1])); ys.append(float(xy[2])) + elif g[0] == 'circle': + c = find(g, 'center'); r = float(find(g, 'radius')[1]) + xs += [float(c[1]) - r, float(c[1]) + r]; ys += [float(c[2]) - r, float(c[2]) + r] + for p in sym_pins(sym): + xs.append(p['x']); ys.append(p['y']) + if not xs: + return (-2.54, -2.54, 2.54, 2.54) + return (min(xs), min(ys), max(xs), max(ys)) + + +def pin_net_map(): + m = {} + for net, pins in D.NETS.items(): + for p in pins: + m[p] = net + return m + + +def outward(angle): + """Unit vector (schematic coords, y down) pointing away from the symbol body.""" + a = int(round(angle)) % 360 + return {0: (-1, 0), 180: (1, 0), 90: (0, 1), 270: (0, -1)}[a] + + +def label_angle(o): + return {(1, 0): 0, (-1, 0): 180, (0, -1): 90, (0, 1): 270}[o] + + +def font(size=1.27, hide=False, justify=None, bold=False): + f = ['font', ['size', fmt(size), fmt(size)]] + ([['bold', 'yes']] if bold else []) + e = ['effects', f] + if justify: + e.append(['justify'] + justify) + if hide: + e.append(['hide', 'yes']) + return e + + +def main(): + pin_net = pin_net_map() + nc = set(D.NO_CONNECT) + items = [] # schematic body items + lib_syms = {} + custom_defs = {} + instances = {} # ref -> (lib_id, sym, value, footprint, lcsc, descr) + for ref, (sym_id, fp_id, value, *_rest) in D.PARTS.items(): + lcsc, descr = _rest[-2], _rest[-1] + full, sym, custom = symbol_def(sym_id) + lib_syms[full] = sym + if custom: + custom_defs[custom] = sym + instances[ref] = (full, sym, value, fp_id, lcsc, descr) + flag_full, flag_sym, _ = symbol_def('power:PWR_FLAG') + lib_syms[flag_full] = flag_sym + for f in FLAGS: + instances[f] = (flag_full, flag_sym, 'PWR_FLAG', '', '', '') + + # sanity: every pin of every part is either in a net or no-connect + missing = [] + for ref, (full, sym, *_r) in instances.items(): + if ref.startswith('#'): + continue + for p in sym_pins(sym): + key = f'{ref}.{p["num"]}' + if key not in pin_net and key not in nc: + missing.append(key) + if missing: + print('UNASSIGNED PINS:', missing) + + texts = [] + for title, (x0, y0, x1, y1), refs in GROUPS: + texts.append(['text', QStr(title), ['exclude_from_sim', 'no'], ['at', fmt(x0), fmt(y0 - 3.81), '0'], + font(2.0, bold=True, justify=['left', 'bottom']), ['uuid', QStr(uid('grp', title))]]) + texts.append(['rectangle', ['start', fmt(x0 - 2.54), fmt(y0 - 2.54)], ['end', fmt(x1), fmt(y1)], + ['stroke', ['width', '0.2'], ['type', 'dash']], ['fill', ['type', 'none']], + ['uuid', QStr(uid('grprect', title))]]) + # pack symbols left->right, wrap + cx, cy, row_h = x0 + 2.54, y0 + 2.54, 0 + for ref in refs: + full, sym, value, fp_id, lcsc, descr = instances[ref] + bx0, by0, bx1, by1 = bbox(sym) + pins = sym_pins(sym) + lab = max([len(pin_net.get(f'{ref}.{p["num"]}', '') or ('X' if ref.startswith('#') else '')) for p in pins] + [0]) + lab_w = STUB + 1.0 * 1.27 * lab + 1.27 + left = any(outward(p['angle'])[0] < 0 for p in pins) + right = any(outward(p['angle'])[0] > 0 for p in pins) + up = any(outward(p['angle'])[1] < 0 for p in pins) + dn = any(outward(p['angle'])[1] > 0 for p in pins) + w = (bx1 - bx0) + (lab_w if left else 2.54) + (lab_w if right else 2.54) + 5.08 + h = (by1 - by0) + (lab_w if up else 5.08) + (lab_w if dn else 5.08) + 2.54 + if cx + w > x1 and cx > x0 + 2.54: + cx = x0 + 2.54 + cy += row_h + row_h = 0 + # symbol origin so that its bbox sits inside the slot + ox = snap(cx + (lab_w if left else 2.54) - bx0, 1.27) + oy = snap(cy + (lab_w if up else 5.08) + by1, 1.27) + instances[ref] = (full, sym, value, fp_id, lcsc, descr, ox, oy, (by1, by0)) + cx += w + row_h = max(row_h, h) + if cy + row_h > y1 + 0.1: + print(f' ! group "{title}" overflows its box by {cy + row_h - y1:.1f} mm') + + sym_nodes = [] + flag_count = 0 + for ref, inst in instances.items(): + full, sym, value, fp_id, lcsc, descr, ox, oy, (top, bot) = inst + is_flag = ref.startswith('#') + node = ['symbol', ['lib_id', QStr(full)], ['at', fmt(ox), fmt(oy), '0'], ['unit', '1'], + ['exclude_from_sim', 'no'], ['in_bom', 'no' if (is_flag or ref.startswith(('H', 'JP'))) else 'yes'], + ['on_board', 'no' if is_flag else 'yes'], ['dnp', 'no'], + ['uuid', QStr(uid('sym', ref))]] + props = {str(p[1]): p for p in findall(sym, 'property')} + ref_y = oy - top - 1.27 + val_y = oy - bot + 2.54 + node.append(['property', QStr('Reference'), QStr(ref), ['at', fmt(ox), fmt(ref_y), '0'], + font(hide=is_flag)]) + node.append(['property', QStr('Value'), QStr(value), ['at', fmt(ox), fmt(val_y), '0'], font(hide=is_flag)]) + node.append(['property', QStr('Footprint'), QStr(fp_id), ['at', fmt(ox), fmt(oy), '0'], font(hide=True)]) + ds = props.get('Datasheet') + node.append(['property', QStr('Datasheet'), QStr(str(ds[2]) if ds else ''), ['at', fmt(ox), fmt(oy), '0'], font(hide=True)]) + node.append(['property', QStr('Description'), QStr(descr), ['at', fmt(ox), fmt(oy), '0'], font(hide=True)]) + if lcsc: + node.append(['property', QStr('LCSC'), QStr(lcsc), ['at', fmt(ox), fmt(oy), '0'], font(hide=True)]) + pins = sym_pins(sym) + seen = set() + for p in pins: + if p['num'] in seen: + continue + seen.add(p['num']) + node.append(['pin', QStr(p['num']), ['uuid', QStr(uid('pin', ref, p['num']))]]) + node.append(['instances', ['project', QStr(NAME), ['path', QStr('/' + ROOT), ['reference', QStr(ref)], ['unit', '1']]]]) + sym_nodes.append(node) + # wires + labels / no-connects + done = set() + for p in pins: + key = f'{ref}.{p["num"]}' + px, py = ox + p['x'], oy - p['y'] + if (round(px, 3), round(py, 3)) in done: + continue + done.add((round(px, 3), round(py, 3))) + net = FLAGS[ref] if is_flag else pin_net.get(key) + if net is None: + if key in nc or p['type'] == 'no_connect': + items.append(['no_connect', ['at', fmt(px), fmt(py)], ['uuid', QStr(uid('nc', key, px, py))]]) + continue + o = outward(p['angle']) + qx, qy = px + STUB * o[0], py + STUB * o[1] + items.append(['wire', ['pts', ['xy', fmt(px), fmt(py)], ['xy', fmt(qx), fmt(qy)]], + ['stroke', ['width', '0'], ['type', 'default']], ['uuid', QStr(uid('w', key, px, py))]]) + ang = label_angle(o) + just = ['left', 'bottom'] if ang in (0, 90) else ['right', 'bottom'] + items.append(['label', QStr(net), ['at', fmt(qx), fmt(qy), str(ang)], font(justify=just), + ['uuid', QStr(uid('lbl', key, px, py))]]) + + root = ['kicad_sch', ['version', '20250114'], ['generator', QStr('eeschema')], ['generator_version', QStr('9.0')], + ['uuid', QStr(ROOT)], ['paper', QStr('A2')], + ['title_block', ['title', QStr('SandTable Controller')], ['date', QStr('2026-10-22')], ['rev', QStr(D.VERSION)], + ['company', QStr('lazypugs')], + ['comment', '1', QStr('ESP32-WROOM-32E (FluidNC) + 2x DRV8825 StepStick, 12V in')], + ['comment', '2', QStr('Drop-in for the Arduino+CNC shield bay in the sand table (Uno hole pattern)')]], + ['lib_symbols'] + list(lib_syms.values())] + root += texts + items + sym_nodes + root.append(['sheet_instances', ['path', QStr('/'), ['page', QStr('1')]]]) + root.append(['embedded_fonts', 'no']) + os.makedirs(OUT, exist_ok=True) + with open(os.path.join(OUT, NAME + '.kicad_sch'), 'w') as f: + f.write(dumps(root) + '\n') + # project symbol library with the custom symbols + lib = ['kicad_symbol_lib', ['version', '20241209'], ['generator', QStr('sandtable-gen')], ['generator_version', QStr('9.0')]] + for name, s in custom_defs.items(): + s2 = copy.deepcopy(s) + s2[1] = QStr(name) + lib.append(s2) + with open(os.path.join(OUT, 'sandtable.kicad_sym'), 'w') as f: + f.write(dumps(lib) + '\n') + symlibs = sorted({sid.split(':')[0] for sid in [v[0] for v in D.PARTS.values()] + ['power:PWR_FLAG']}) + with open(os.path.join(OUT, 'sym-lib-table'), 'w') as f: + f.write('(sym_lib_table\n (version 7)\n') + f.write(' (lib (name "SandTable")(type "KiCad")(uri "${KIPRJMOD}/sandtable.kicad_sym")(options "")(descr "SandTable custom symbols"))\n') + for lib in symlibs: + f.write(f' (lib (name "{lib}")(type "KiCad")(uri "${{KICAD9_SYMBOL_DIR}}/{lib}.kicad_sym")(options "")(descr ""))\n') + f.write(')\n') + fplibs = sorted({v[1].split(':')[0] for v in D.PARTS.values()}) + with open(os.path.join(OUT, 'fp-lib-table'), 'w') as f: + f.write('(fp_lib_table\n (version 7)\n') + for lib in fplibs: + f.write(f' (lib (name "{lib}")(type "KiCad")(uri "${{KICAD9_FOOTPRINT_DIR}}/{lib}.pretty")(options "")(descr ""))\n') + f.write(')\n') + print('wrote schematic,', len(sym_nodes), 'symbols,', sum(1 for i in items if i[0] == 'label'), 'labels,', + sum(1 for i in items if i[0] == 'no_connect'), 'no-connects') + + +if __name__ == '__main__': + main() diff --git a/pcb/tools/sexpr.py b/pcb/tools/sexpr.py new file mode 100644 index 0000000..f040e3d --- /dev/null +++ b/pcb/tools/sexpr.py @@ -0,0 +1,100 @@ +"""Tiny S-expression reader/writer for KiCad files. + +Lists are Python lists; atoms are str. Quoted strings are kept as QStr so they +round-trip with quotes. Numbers stay as plain str atoms (KiCad cares about text). +""" + + +class QStr(str): + """A string that was quoted in the source (and must be written quoted).""" + + +def parse(text): + pos = 0 + n = len(text) + stack = [[]] + while pos < n: + c = text[pos] + if c in ' \t\r\n': + pos += 1 + elif c == '(': + stack.append([]) + pos += 1 + elif c == ')': + done = stack.pop() + stack[-1].append(done) + pos += 1 + elif c == '"': + pos += 1 + buf = [] + while True: + ch = text[pos] + if ch == '\\': + buf.append(text[pos:pos + 2]) + pos += 2 + continue + if ch == '"': + pos += 1 + break + buf.append(ch) + pos += 1 + raw = ''.join(buf) + # keep escapes as-is (we re-emit them unchanged) + stack[-1].append(QStr(raw)) + else: + start = pos + while pos < n and text[pos] not in ' \t\r\n()"': + pos += 1 + stack[-1].append(text[start:pos]) + assert len(stack) == 1 + return stack[0][0] if len(stack[0]) == 1 else stack[0] + + +def dumps(node, indent=0): + """Serialize back to KiCad-style text (one sub-list per line when nested).""" + if isinstance(node, QStr): + return '"' + str(node) + '"' + if isinstance(node, str): + return node + if isinstance(node, (int, float)): + return fmt(node) + # list + simple = all(not isinstance(x, list) for x in node) + if simple: + return '(' + ' '.join(dumps(x) for x in node) + ')' + pad = ' ' * (indent + 1) + parts = [] + head = [] + i = 0 + while i < len(node) and not isinstance(node[i], list): + head.append(dumps(node[i])) + i += 1 + out = '(' + ' '.join(head) + for x in node[i:]: + if isinstance(x, list): + out += '\n' + pad + dumps(x, indent + 1) + else: + out += ' ' + dumps(x) + out += '\n' + ' ' * indent + ')' + return out + + +def fmt(v): + if isinstance(v, str): + return v + s = f'{v:.4f}'.rstrip('0').rstrip('.') + if s in ('-0', ''): + s = '0' + return s + + +def find(node, key): + """First child list whose head is key.""" + for x in node: + if isinstance(x, list) and x and x[0] == key: + return x + return None + + +def findall(node, key): + return [x for x in node if isinstance(x, list) and x and x[0] == key]