# HAMeter configuration
# Mount this file into the container at /config/hameter.yaml

general:
  # 0 = continuous (recommended for always-on server)
  sleep_for: 0
  # RTL-SDR device index (0 = first/only device)
  device_id: "0"
  # rtl_tcp listens inside the container (don't change unless using remote SDR)
  rtl_tcp_host: "127.0.0.1"
  rtl_tcp_port: 1234
  # DEBUG, INFO, WARNING, ERROR
  log_level: INFO

mqtt:
  # Unraid server IP (where Mosquitto runs)
  host: "192.168.1.74"
  port: 1883
  user: ""
  password: ""
  base_topic: "hameter"
  ha_autodiscovery: true
  ha_autodiscovery_topic: "homeassistant"
  client_id: "hameter"

meters:
  # Electric Meter — Itron Centron C1SR
  # ERT Radio Serial: 23040293 (NOT the billing number 2698881)
  - id: 23040293
    protocol: scm
    name: "Electric Meter"
    unit_of_measurement: "kWh"
    icon: "mdi:flash"
    device_class: energy
    state_class: total_increasing
    # Calibration: physical_meter_reading / raw_scm_value
    # From PoC: 59669 / 516030 ≈ 0.1156
    # TODO: take a simultaneous reading to confirm this multiplier
    multiplier: 0.1156

  # Gas Meter — uncomment after running --discover to find the ID
  # - id: REPLACE_WITH_GAS_METER_ID
  #   protocol: scm
  #   name: "Gas Meter"
  #   unit_of_measurement: "ft³"
  #   icon: "mdi:fire"
  #   device_class: gas
  #   state_class: total_increasing
  #   multiplier: 1.0

  # Water Meter — likely Neptune R900 protocol
  # - id: REPLACE_WITH_WATER_METER_ID
  #   protocol: r900
  #   name: "Water Meter"
  #   unit_of_measurement: "gal"
  #   icon: "mdi:water"
  #   device_class: water
  #   state_class: total_increasing
  #   multiplier: 1.0