# rtlamr2mqtt configuration for HAMeter
# Reference: https://github.com/allangood/rtlamr2mqtt

general:
  # Seconds between reading cycles (300 = 5 minutes)
  sleep_for: 300
  # RTL-SDR device index (0 = first/only device)
  device_id: "0"
  # Set to true to see all meter transmissions (useful for finding gas/water meter IDs)
  # Change to false once all meter IDs are identified
  tickle_rtl_tcp: false

mqtt:
  # Unraid server IP (where Mosquitto runs)
  host: "192.168.1.74"
  port: 1883
  # Leave blank if Mosquitto is configured without auth (default)
  # Add credentials if you enable authentication on Mosquitto
  user: ""
  password: ""
  ha_autodiscovery: true
  ha_autodiscovery_topic: homeassistant

meters:
  # Electric Meter - Itron Centron C1SR
  # ERT Radio Serial: 23040293 (NOT the billing number 2698881)
  - id: 23040293
    protocol: scm
    name: Electric Meter
    unit_of_measurement: kWh
    icon: mdi:flash
    device_class: energy
    state_class: total_increasing

  # --- Future meters (uncomment and fill in IDs after identification) ---

  # Gas Meter - inspect physically to find ERT serial number
  # - id: REPLACE_WITH_GAS_METER_ID
  #   protocol: scm
  #   name: Gas Meter
  #   unit_of_measurement: ft³
  #   icon: mdi:fire
  #   device_class: gas
  #   state_class: total_increasing

  # Water Meter - likely Neptune R900 protocol
  # - id: REPLACE_WITH_WATER_METER_ID
  #   protocol: r900
  #   name: Water Meter
  #   unit_of_measurement: gal
  #   icon: mdi:water
  #   device_class: water
  #   state_class: total_increasing